1 dnl Process this file with autoconf to produce a configure script.
3 dnl And be careful when changing it! If you must add tests with square
4 dnl brackets, be sure changequote invocations surround it.
6 dnl Copyright (C) 2012-2018 Free Software Foundation, Inc.
8 dnl This file is free software; you can redistribute it and/or modify
9 dnl it under the terms of the GNU General Public License as published by
10 dnl the Free Software Foundation; either version 3 of the License, or
11 dnl (at your option) any later version.
13 dnl This program is distributed in the hope that it will be useful,
14 dnl but WITHOUT ANY WARRANTY; without even the implied warranty of
15 dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 dnl GNU General Public License for more details.
18 dnl You should have received a copy of the GNU General Public License
19 dnl along with this program; see the file COPYING3. If not see
20 dnl <http://www.gnu.org/licenses/>.
22 dnl v2.5 needed for --bindir et al
23 m4_include([../bfd/version.m4])
24 AC_INIT([gas], BFD_VERSION)
25 AC_CONFIG_SRCDIR(as.h)
27 dnl Autoconf 2.57 will find the aux dir without this. However, unless
28 dnl we specify this explicitly, automake-1.7 will assume that ylwrap is in
29 dnl gas/ instead of gas/../.
38 AC_USE_SYSTEM_EXTENSIONS
42 ACX_PROG_CMP_IGNORE_INITIAL
44 AC_ARG_ENABLE(targets,
45 [ --enable-targets alternative target configurations besides the primary],
46 [case "${enableval}" in
47 yes | "") AC_MSG_ERROR(enable-targets option must specify target names or 'all')
49 no) enable_targets= ;;
50 *) enable_targets=$enableval ;;
54 if grep '^RELEASE=y' ${srcdir}/../bfd/Makefile.am >/dev/null 2>/dev/null ; then
57 AC_ARG_ENABLE(checking,
58 [ --enable-checking enable run-time checks],
59 [case "${enableval}" in
60 no|none) ac_checking= ;;
63 if test x$ac_checking != x ; then
64 AC_DEFINE(ENABLE_CHECKING, 1, [Define if you want run-time sanity checks.])
68 # Decide the default method for compressing debug sections.
69 ac_default_compressed_debug_sections=unset
70 # Provide a configure time option to override our default.
71 AC_ARG_ENABLE(compressed_debug_sections,
72 AS_HELP_STRING([--enable-compressed-debug-sections={all,gas,none}],
73 [compress debug sections by default]),
74 [case ,"${enableval}", in
75 ,yes, | ,all, | *,gas,*) ac_default_compressed_debug_sections=yes ;;
76 ,no, | ,none,) ac_default_compressed_debug_sections=no ;;
77 *) ac_default_compressed_debug_sections=unset ;;
81 # Decide if x86 assembler should generate relax relocations.
82 ac_default_x86_relax_relocations=unset
83 # Provide a configure time option to override our default.
84 AC_ARG_ENABLE(x86_relax_relocations,
85 AS_HELP_STRING([--enable-x86-relax-relocations],
86 [generate x86 relax relocations by default]),
87 [case "${enableval}" in
88 no) ac_default_x86_relax_relocations=0 ;;
91 # Decide if ELF assembler should generate common symbols with the
93 ac_default_elf_stt_common=unset
94 # Provide a configure time option to override our default.
95 AC_ARG_ENABLE(elf_stt_common,
96 AS_HELP_STRING([--enable-elf-stt-common],
97 [generate ELF common symbols with STT_COMMON type by default]),
98 [case "${enableval}" in
99 yes) ac_default_elf_stt_common=1 ;;
103 # Decide if the ELF assembler should default to generating
104 # GNU Build notes if none are provided by the input.
105 ac_default_generate_build_notes=0
106 # Provide a configuration option to override the default.
107 AC_ARG_ENABLE(generate_build_notes,
108 AS_HELP_STRING([--enable-generate-build-notes],
109 [generate GNU Build notes if none are provided by the input]),
110 [case "${enableval}" in
111 yes) ac_default_generate_build_notes=1 ;;
112 no) ac_default_generate_build_notes=0 ;;
120 # Generate a header file
121 AC_CONFIG_HEADERS(config.h:config.in)
123 dnl Option --with-cpu=TYPE allows configure type control of the default
124 dnl cpu type within the assembler. Currently only the ARC target
125 dnl supports this feature, but others may be added in the future.
127 AS_HELP_STRING([--with-cpu=CPU],
128 [default cpu variant is CPU (currently only supported on ARC)]),
129 [AC_DEFINE_UNQUOTED(TARGET_WITH_CPU,
131 [Target specific CPU.])],
135 AH_VERBATIM([00_CONFIG_H_CHECK],
136 [/* Check that config.h is #included before system headers
137 (this works only for glibc, but that should be enough). */
138 #if defined(__GLIBC__) && !defined(__FreeBSD_kernel__) && !defined(__CONFIG_H__)
139 # error config.h must be #included before system headers
141 #define __CONFIG_H__ 1])
143 # If we are on a DOS filesystem, we must use gdb.ini rather than
146 *-*-msdos* | *-*-go32* | *-*-mingw32* | *-*-windows*)
148 AC_CONFIG_FILES(gdb.ini:gdbinit.in)
152 AC_CONFIG_FILES(.gdbinit:gdbinit.in)
157 #We need this for the host.
162 # Makefile target for installing gas in $(tooldir)/bin.
163 install_tooldir=install-exec-tooldir
167 if test -n "$enable_targets" ; then
168 for t in `echo $enable_targets | sed 's/,/ /g'`; do
169 if test $t = "all"; then
173 result=`$ac_config_sub $t 2>/dev/null`
174 if test -n "$result" ; then
175 canon_targets="$canon_targets $result"
177 # # Permit "all", etc. We don't support it yet though.
178 # canon_targets="$canon_targets $t"
181 GAS_UNIQ(canon_targets)
186 for this_target in $target $canon_targets ; do
189 . ${srcdir}/configure.tgt
191 case ${target_cpu} in
193 AC_DEFINE_UNQUOTED(DEFAULT_CRIS_ARCH, $arch,
194 [Default CRIS architecture.])
198 if test ${this_target} = $target ; then
199 target_cpu_type=${cpu_type}
200 elif test ${target_cpu_type} != ${cpu_type} ; then
204 generic_target=${cpu_type}-${target_vendor}-${target_os}
205 case ${generic_target} in
209 AC_DEFINE(STRICTCOFF, 1, [Using strict COFF?])
213 | x86_64-*-solaris2 \
214 | i386-*-solaris2.[[0-9]] \
215 | i386-*-solaris2.1[[01]] \
216 | x86_64-*-solaris2.1[[01]])
217 if test ${this_target} = $target \
218 && test ${ac_default_x86_relax_relocations} = unset; then
219 ac_default_x86_relax_relocations=0
229 AC_DEFINE(AIX_WEAK_SUPPORT, 1,
230 [Define if using AIX 5.2 value for C_WEAKEXT.])
233 if test ${this_target} = $target; then
234 AC_DEFINE(TARGET_SOLARIS_COMMENT, 1,
235 [Define if default target is PowerPC Solaris.])
237 if test x${endian} = xbig; then
238 AC_MSG_ERROR(Solaris must be configured little endian)
243 if test ${this_target} = $target ; then
245 if test x${endian} = xbig; then
247 elif test x${endian} = xlittle; then
250 if test x${endian_def} != x; then
251 AC_DEFINE_UNQUOTED(TARGET_BYTES_BIG_ENDIAN, $endian_def,
252 [Define as 1 if big endian.])
256 # Other random stuff.
260 # Set mips_cpu to the name of the default CPU.
261 case ${target_cpu} in
262 mips | mipsbe | mipseb | mipsle | mipsel | mips64 | mips64el)
265 mipsisa32 | mipsisa32el)
268 mipsisa32r2 | mipsisa32r2el)
271 mipsisa32r3 | mipsisa32r3el)
274 mipsisa32r5 | mipsisa32r5el)
277 mipsisa32r6 | mipsisa32r6el)
280 mipsisa64 | mipsisa64el)
283 mipsisa64r2 | mipsisa64r2el)
286 mipsisa64r3 | mipsisa64r3el)
289 mipsisa64r5 | mipsisa64r5el)
292 mipsisa64r6 | mipsisa64r6el)
295 mipstx39 | mipstx39el)
298 mips64vr | mips64vrel)
301 mipsisa32r2* | mipsisa64r2*)
303 mips_cpu=`echo $target_cpu | sed -e 's/[a-z]*..r2//' -e 's/el$//'`
306 mipsisa32r6* | mipsisa64r6*)
308 mips_cpu=`echo $target_cpu | sed -e 's/[a-z]*..r6//' -e 's/el$//'`
311 mips64* | mipsisa64* | mipsisa32*)
313 mips_cpu=`echo $target_cpu | sed -e 's/[a-z]*..//' -e 's/el$//'`
318 mips_cpu=`echo $target_cpu | sed -e 's/^mips//' -e 's/el$//'`
322 AC_MSG_ERROR($target_cpu isn't a supported MIPS CPU name)
325 # See whether it's appropriate to set E_MIPS_ABI_O32 for o32
326 # binaries. It's a GNU extension that some OSes don't understand.
335 # Decide whether to generate 32-bit or 64-bit code by default.
336 # Used to resolve -march=from-abi when an embedded ABI is selected.
338 mips64*-*-* | mipsisa64*-*-*)
345 # Decide which ABI to target by default.
347 mips64*-linux* | mips-sgi-irix6* | mips64*-freebsd* \
348 | mips64*-kfreebsd*-gnu | mips64*-ps2-elf*)
349 mips_default_abi=N32_ABI
351 mips*-linux* | mips*-freebsd* | mips*-kfreebsd*-gnu)
352 mips_default_abi=O32_ABI
355 mips_default_abi=N64_ABI
358 mips_default_abi=NO_ABI
361 AC_DEFINE_UNQUOTED(MIPS_CPU_STRING_DEFAULT, "$mips_cpu",
362 [Default CPU for MIPS targets. ])
363 AC_DEFINE_UNQUOTED(USE_E_MIPS_ABI_O32, $use_e_mips_abi_o32,
364 [Allow use of E_MIPS_ABI_O32 on MIPS targets. ])
365 AC_DEFINE_UNQUOTED(MIPS_DEFAULT_64BIT, $mips_default_64bit,
366 [Generate 64-bit code by default on MIPS targets. ])
367 AC_DEFINE_UNQUOTED(MIPS_DEFAULT_ABI, $mips_default_abi,
368 [Choose a default ABI for MIPS targets. ])
372 # Do we need the opcodes library?
380 case "${enable_shared}" in
381 yes) shared_opcodes=true ;;
382 *opcodes*) shared_opcodes=true ;;
383 *) shared_opcodes=false ;;
388 # Any other special object files needed ?
392 for f in bfin-parse.o bfin-lex-wrapper.o; do
393 case " $extra_objects " in
395 *) extra_objects="$extra_objects $f" ;;
400 epiphany | fr30 | ip2k | iq2000 | lm32 | m32r | or1k)
412 case " $extra_objects " in
414 *) extra_objects="$extra_objects $f" ;;
423 for f in itbl-parse.o itbl-lex-wrapper.o itbl-ops.o; do
424 case " $extra_objects " in
426 *) extra_objects="$extra_objects $f" ;;
436 # Decide BASELINE, REDUCED_REGS, FPU_DP_EXT, FPU_SP_EXT features
437 # based on arch_name.
438 AC_MSG_CHECKING(for default configuration of --with-arch)
439 if test "x${with_arch}" != x; then
441 v2j | v2s | v2f | v2 | v3m | v3j | v3s | v3f | v3 )
442 AC_DEFINE_UNQUOTED(NDS32_DEFAULT_ARCH_NAME, "$with_arch",
443 [Define value for nds32_arch_name])
446 AC_MSG_ERROR(This kind of arch name does *NOT* exist!)
450 AC_MSG_RESULT($with_arch)
452 # Decide features one by one.
453 AC_MSG_CHECKING(for default configuration of --enable-dx-regs)
454 if test "x${enable_dx_regs}" = xyes; then
455 AC_DEFINE(NDS32_DEFAULT_DX_REGS, 1,
456 [Define value for nds32_dx_regs])
458 AC_DEFINE(NDS32_DEFAULT_DX_REGS, 0,
459 [Define default value for nds32_dx_regs])
461 AC_MSG_RESULT($enable_dx_regs)
463 AC_MSG_CHECKING(for default configuration of --enable-perf-ext)
464 if test "x${enable_perf_ext}" = xno; then
465 AC_DEFINE(NDS32_DEFAULT_PERF_EXT, 0,
466 [Define value for nds32_perf_ext])
468 AC_DEFINE(NDS32_DEFAULT_PERF_EXT, 1,
469 [Define default value for nds32_perf_ext])
471 AC_MSG_RESULT($enable_perf_ext)
473 AC_MSG_CHECKING(for default configuration of --enable-perf-ext2)
474 if test "x${enable_perf_ext2}" = xno; then
475 AC_DEFINE(NDS32_DEFAULT_PERF_EXT2, 0,
476 [Define value for nds32_perf_ext2])
478 AC_DEFINE(NDS32_DEFAULT_PERF_EXT2, 1,
479 [Define default value for nds32_perf_ext2])
481 AC_MSG_RESULT($enable_perf_ext2)
483 AC_MSG_CHECKING(for default configuration of --enable-string-ext)
484 if test "x${enable_string_ext}" = xno; then
485 AC_DEFINE(NDS32_DEFAULT_STRING_EXT, 0,
486 [Define value for nds32_string_ext])
488 AC_DEFINE(NDS32_DEFAULT_STRING_EXT, 1,
489 [Define default value for nds32_string_ext])
491 AC_MSG_RESULT($enable_string_ext)
493 AC_MSG_CHECKING(for default configuration of --enable-audio-ext)
494 if test "x${enable_audio_ext}" = xno; then
495 AC_DEFINE(NDS32_DEFAULT_AUDIO_EXT, 0,
496 [Define value for nds32_audio_ext])
498 AC_DEFINE(NDS32_DEFAULT_AUDIO_EXT, 1,
499 [Define default value for nds32_audio_ext])
501 AC_MSG_RESULT($enable_audio_ext)
504 aarch64 | i386 | riscv | s390 | sparc)
505 if test $this_target = $target ; then
506 AC_DEFINE_UNQUOTED(DEFAULT_ARCH, "${arch}", [Default architecture.])
512 case " $extra_objects " in
514 *) extra_objects="$extra_objects $f" ;;
520 case " $extra_objects " in
522 *) extra_objects="$extra_objects $f" ;;
535 f=config/xtensa-relax.o
536 case " $extra_objects " in
538 *) extra_objects="$extra_objects $f" ;;
546 if test $using_cgen = yes ; then
548 case " $extra_objects " in
550 *) extra_objects="$extra_objects $f" ;;
554 # See if we really can support this configuration with the emulation code.
556 if test $this_target = $target ; then
564 case " $extra_objects " in
566 *) extra_objects="$extra_objects $f" ;;
570 # From target name and format, produce a list of supported emulations.
572 case ${generic_target}-${fmt} in
573 mips-*-*-*) case "$endian" in
574 big) emulation="mipsbelf mipslelf mipself" ;;
575 *) emulation="mipslelf mipsbelf mipself" ;;
577 # i386-pc-pe-coff != i386-pc-coff.
579 # Uncommenting the next line will turn on support for i386 AOUT
580 # for the default linux configuration
581 # i386-*-linux*-elf) emulation="i386elf i386aout" ;;
583 i386-*-aout) emulation="i386aout" ;;
584 i386-*-coff) emulation="i386coff" ;;
585 i386-*-elf) emulation="i386elf" ;;
587 # Always all formats. The first stated emulation becomes the default.
588 cris-*-*aout*) emulation="crisaout criself" ;;
589 cris-*-*) emulation="criself crisaout" ;;
592 emulations="$emulations $emulation"
596 if test ${ac_default_x86_relax_relocations} = unset; then
597 ac_default_x86_relax_relocations=1
599 AC_DEFINE_UNQUOTED(DEFAULT_GENERATE_X86_RELAX_RELOCATIONS,
600 $ac_default_x86_relax_relocations,
601 [Define to 1 if you want to generate x86 relax relocations by default.])
603 if test ${ac_default_elf_stt_common} = unset; then
604 ac_default_elf_stt_common=0
606 AC_DEFINE_UNQUOTED(DEFAULT_GENERATE_ELF_STT_COMMON,
607 $ac_default_elf_stt_common,
608 [Define to 1 if you want to generate ELF common symbols with the
609 STT_COMMON type by default.])
611 AC_DEFINE_UNQUOTED(DEFAULT_GENERATE_BUILD_NOTES,
612 $ac_default_generate_build_notes,
613 [Define to 1 if you want to generate GNU Build attribute notes
614 by default, if none are contained in the input.])
616 if test x$ac_default_compressed_debug_sections = xyes ; then
617 AC_DEFINE(DEFAULT_FLAG_COMPRESS_DEBUG, 1, [Define if you want compressed debug sections by default.])
620 # Turn on all targets if possible
621 if test ${all_targets} = "yes"; then
622 case ${target_cpu_type} in
624 case ${obj_format} in
626 emulations="$emulations i386coff i386elf"
629 emulations="$emulations i386aout i386elf"
632 emulations="$emulations i386aout i386coff"
637 case ${obj_format} in
639 emulations="$emulations i386coff i386elf"
642 emulations="$emulations i386aout i386elf"
645 emulations="$emulations i386aout i386coff"
652 # PE code has way too many macros tweaking behaviour
654 pe*) emulations="" ;;
657 # Assign floating point type. Most processors with FP support
658 # IEEE FP. On those that don't support FP at all, usually IEEE
660 case ${target_cpu} in
661 vax | pdp11 ) atof=vax ;;
665 case "${obj_format}" in
666 "") AC_MSG_ERROR(GAS does not know what format to use for target ${target}) ;;
669 # Unfortunately the cpu in cpu-opc.h file isn't always $(TARGET_CPU).
671 if test $using_cgen = yes ; then
672 case ${target_cpu} in
674 cgen_cpu_prefix=or1k ;;
675 *) cgen_cpu_prefix=${target_cpu} ;;
677 AC_SUBST(cgen_cpu_prefix)
678 AC_DEFINE(USING_CGEN, 1, [Using cgen code?])
682 dnl Make sure the desired support files exist.
685 if test ! -r ${srcdir}/config/tc-${target_cpu_type}.c; then
686 AC_MSG_ERROR(GAS does not support target CPU ${target_cpu_type})
689 if test ! -r ${srcdir}/config/obj-${obj_format}.c; then
690 AC_MSG_ERROR(GAS does not have support for object file format ${obj_format})
693 # Some COFF configurations want these random other flags set.
694 case ${obj_format} in
696 case ${target_cpu_type} in
697 i386) AC_DEFINE(I386COFF, 1, [Using i386 COFF?]) ;;
698 x86_64) AC_DEFINE(I386COFF, 1, [Using i386 COFF?]) ;;
703 # Getting this done right is going to be a bitch. Each configuration specified
704 # with --enable-targets=... should be checked for environment, format, cpu
707 # For each configuration, the necessary object file support code must be linked
708 # in. This might be only one, it might be up to four. The necessary emulation
709 # code needs to be provided, too.
711 # And then there's "--enable-targets=all"....
713 # For now, just always do it for MIPS ELF configurations. Sigh.
715 formats="${obj_format}"
719 for em in . $emulations ; do
722 mipsbelf | mipslelf | mipself)
723 fmt=elf file=mipself ;;
731 formats="$formats $fmt"
732 emfiles="$emfiles config/e-$file.o"
733 EMULATIONS="$EMULATIONS &$em,"
737 if test `set . $formats ; shift ; echo $#` -gt 1 ; then
738 for fmt in $formats ; do
740 aout) AC_DEFINE(OBJ_MAYBE_AOUT, 1, [a.out support?]) ;;
741 coff) AC_DEFINE(OBJ_MAYBE_COFF, 1, [COFF support?]) ;;
742 ecoff) AC_DEFINE(OBJ_MAYBE_ECOFF, 1, [ECOFF support?]) ;;
743 elf) AC_DEFINE(OBJ_MAYBE_ELF, 1, [ELF support?]) ;;
744 generic) AC_DEFINE(OBJ_MAYBE_GENERIC, 1, [generic support?]) ;;
745 som) AC_DEFINE(OBJ_MAYBE_SOM, 1, [SOM support?]) ;;
747 extra_objects="$extra_objects config/obj-$fmt.o"
751 if test `set . $emfiles ; shift ; echo $#` -gt 0 ; then
752 DEFAULT_EMULATION=`set . $emulations ; echo $2`
753 # e-mipself has more than one emulation per file, e-i386* has just one at the
754 # moment. If only one emulation is specified, then don't define
755 # USE_EMULATIONS or include any of the e-files as they will only be bloat.
756 case "${obj_format}${emfiles}" in
758 extra_objects="$extra_objects $emfiles"
759 AC_DEFINE(USE_EMULATIONS, 1, [Use emulation support?]) ;;
762 AC_SUBST(extra_objects)
763 AC_DEFINE_UNQUOTED(EMULATIONS, $EMULATIONS, [Supported emulations.])
764 AC_DEFINE_UNQUOTED(DEFAULT_EMULATION, "$DEFAULT_EMULATION",
765 [Default emulation.])
767 reject_dev_configs=yes
769 case ${reject_dev_configs}-${dev} in
771 AC_MSG_ERROR(GAS does not support the ${generic_target} configuration.)
775 AC_SUBST(target_cpu_type)
778 AC_SUBST(install_tooldir)
780 dnl AC_SUBST(emulation)
782 # do we need the opcodes library?
783 case "${need_opcodes}" in
785 OPCODES_LIB=../opcodes/libopcodes.la
789 AC_SUBST(OPCODES_LIB)
791 AC_DEFINE_UNQUOTED(TARGET_ALIAS, "${target_alias}", [Target alias.])
792 AC_DEFINE_UNQUOTED(TARGET_CANONICAL, "${target}", [Canonical target.])
793 AC_DEFINE_UNQUOTED(TARGET_CPU, "${target_cpu}", [Target CPU.])
794 AC_DEFINE_UNQUOTED(TARGET_VENDOR, "${target_vendor}", [Target vendor.])
795 AC_DEFINE_UNQUOTED(TARGET_OS, "${target_os}", [Target OS.])
800 ALL_LINGUAS="es fi fr id ja ru rw sv tr uk zh_CN"
801 ZW_GNU_GETTEXT_SISTER_DIR
805 AM_CONDITIONAL(GENINSRC_NEVER, false)
808 AC_CHECK_HEADERS(string.h stdlib.h memory.h strings.h unistd.h errno.h sys/types.h limits.h locale.h time.h sys/stat.h)
811 # Put this here so that autoconf's "cross-compiling" message doesn't confuse
812 # people who are not cross-compiling but are compiling cross-assemblers.
813 AC_MSG_CHECKING(whether compiling a cross-assembler)
814 if test "${host}" = "${target}"; then
818 AC_DEFINE(CROSS_COMPILE, 1, [Compiling cross-assembler?])
820 AC_MSG_RESULT($cross_gas)
822 dnl ansidecl.h will deal with const
827 # VMS doesn't have unlink.
828 AC_CHECK_FUNCS(unlink remove, break)
829 AC_CHECK_FUNCS(sbrk setlocale)
830 AC_CHECK_FUNCS(strsignal)
834 # do we need the math library?
835 case "${need_libm}" in
842 # Some non-ANSI preprocessors botch requoting inside strings. That's bad
843 # enough, but on some of those systems, the assert macro relies on requoting
847 # On some systems, the system header files may not declare malloc, realloc,
848 # and free. There are places where gas needs these functions to have been
849 # declared -- such as when taking their addresses.
857 #ifdef HAVE_STRINGS_H
869 # Does errno.h declare errno, or do we have to add a separate declaration
871 GAS_CHECK_DECL_NEEDED(errno, f, int f, [
877 AC_MSG_CHECKING(for a known getopt prototype in unistd.h)
878 AC_CACHE_VAL(gas_cv_decl_getopt_unistd_h,
879 [AC_COMPILE_IFELSE([AC_LANG_PROGRAM([#include <unistd.h>], [extern int getopt (int, char *const*, const char *);])],
880 gas_cv_decl_getopt_unistd_h=yes, gas_cv_decl_getopt_unistd_h=no)])
881 AC_MSG_RESULT($gas_cv_decl_getopt_unistd_h)
882 if test $gas_cv_decl_getopt_unistd_h = yes; then
883 AC_DEFINE([HAVE_DECL_GETOPT], 1,
884 [Is the prototype for getopt in <unistd.h> in the expected format?])
887 GAS_CHECK_DECL_NEEDED(environ, f, char **f, $gas_test_headers)
888 GAS_CHECK_DECL_NEEDED(ffs, f, int (*f)(int), $gas_test_headers)
889 GAS_CHECK_DECL_NEEDED(free, f, void (*f)(), $gas_test_headers)
890 GAS_CHECK_DECL_NEEDED(malloc, f, char *(*f)(), $gas_test_headers)
891 GAS_CHECK_DECL_NEEDED(sbrk, f, char *(*f)(), $gas_test_headers)
892 GAS_CHECK_DECL_NEEDED(strstr, f, char *(*f)(), $gas_test_headers)
894 AC_CHECK_DECLS([free, getenv, malloc, mempcpy, realloc, stpcpy, strstr, vsnprintf, asprintf])
898 # Link in zlib if we can. This allows us to write compressed debug sections.
901 # Support for VMS timestamps via cross compile
903 if test "$ac_cv_header_time_h" = yes; then
904 GAS_HAVE_TIME_TYPE_MEMBER(struct tm, tm_gmtoff)
907 if test "$ac_cv_header_sys_stat_h" = yes; then
908 GAS_HAVE_SYS_STAT_TYPE_MEMBER(struct stat, st_mtim, tv_sec)
909 GAS_HAVE_SYS_STAT_TYPE_MEMBER(struct stat, st_mtim, tv_nsec)
913 dnl Required for html, pdf, install-pdf and install-html targets.
914 AC_SUBST(datarootdir)
919 dnl This must come last.
921 dnl We used to make symlinks to files in the source directory, but now
922 dnl we just use the right name for .c files, and create .h files in
923 dnl the build directory which include the right .h file. Make sure
924 dnl the old symlinks don't exist, so that a reconfigure in an existing
925 dnl directory behaves reasonably.
927 AC_CONFIG_FILES(Makefile doc/Makefile po/Makefile.in:po/Make-in)
928 AC_CONFIG_COMMANDS([default],
929 [rm -f targ-cpu.c targ-cpu.h obj-format.h obj-format.c targ-env.h atof-targ.c itbl-cpu.h
930 echo '#include "tc-'"${target_cpu_type}"'.h"' > targ-cpu.h
931 echo '#include "obj-'"${obj_format}"'.h"' > obj-format.h
932 echo '#include "te-'"${te_file}"'.h"' > targ-env.h
933 echo '#include "itbl-'"${target_cpu_type}"'.h"' > itbl-cpu.h
934 if test "x$cgen_cpu_prefix" != x ; then
935 echo '#include "opcodes/'"${cgen_cpu_prefix}"'-desc.h"' > cgen-desc.h
937 [target_cpu_type=${target_cpu_type}
938 cgen_cpu_prefix=${cgen_cpu_prefix}
939 obj_format=${obj_format}