1 dnl Process this file with autoconf to produce a configure script.
3 dnl And be careful when changing it! If you must add tests with square
4 dnl brackets, be sure changequote invocations surround it.
7 AC_PREREQ(2.3)dnl We only need 2.0, but pre-2.3 loses on some AIX version.
11 AC_ARG_ENABLE(bfd-assembler,
12 [ --enable-bfd-assembler use BFD back end for writing object files],
13 [case "${enableval}" in
14 yes) need_bfd=yes user_bfd_gas=yes ;;
15 no) user_bfd_gas=no ;;
16 *) AC_MSG_ERROR(bad value ${enableval} given for bfd-assembler option) ;;
18 AC_ARG_ENABLE(targets,
19 [ targets alternative target configurations besides the primary],
20 [case "${enableval}" in
21 yes | "") AC_ERROR(enable-targets option must specify target names or 'all')
23 no) enable_targets= ;;
24 *) enable_targets=$enableval ;;
27 [ --enable-shared build shared BFD library],
28 [case "${enableval}" in
29 yes) shared=true shared_bfd=true shared_opcodes=true ;;
31 *bfd*opcodes*) shared=true shared_bfd=true shared_opcodes=true ;;
32 *opcodes*bfd*) shared=true shared_bfd=true shared_opcodes=true ;;
33 *bfd*) shared=true shared_bfd=true ;;
34 *opcodes*) shared=true shared_opcodes=true ;;
38 # Generate a header file -- gets more post-processing by Makefile later.
39 AC_CONFIG_HEADER(conf)
41 dnl For recursion to work right, this must be an absolute pathname.
42 AC_CONFIG_AUX_DIR(`cd $srcdir;pwd`/..)
49 if test -n "$enable_targets" ; then
50 for t in `echo $enable_targets | sed 's/,/ /g'`; do
51 result=`$ac_config_sub $t 2>/dev/null`
52 if test -n "$result" ; then
53 canon_targets="$canon_targets $result"
55 # # Permit "all", etc. We don't support it yet though.
56 # canon_targets="$canon_targets $t"
59 GAS_UNIQ(canon_targets)
64 for this_target in $target $canon_targets ; do
66 eval `echo $this_target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/cpu=\1 vendor=\2 os=\3/'`
68 # check for architecture variants
70 armeb) cpu_type=arm endian=big ;;
71 arm*) cpu_type=arm endian=little ;;
72 hppa*) cpu_type=hppa ;;
74 i[456]86) cpu_type=i386 ;;
75 m680[012346]0) cpu_type=m68k ;;
76 m68008) cpu_type=m68k ;;
77 m683??) cpu_type=m68k ;;
80 mips*el) cpu_type=mips endian=little;;
81 mips*) cpu_type=mips endian=big ;;
82 powerpcle*) cpu_type=ppc endian=little ;;
83 powerpc*) cpu_type=ppc endian=big ;;
84 rs6000*) cpu_type=ppc ;;
85 sparc64) cpu_type=sparc want_sparc_v9=true ;;
86 sparc*) cpu_type=sparc ;;
90 if test ${this_target} = $target ; then
91 target_cpu_type=${cpu_type}
92 elif test ${target_cpu_type} != ${cpu_type} ; then
97 generic_target=${cpu_type}-$vendor-$os
102 # assign object format
103 case ${generic_target} in
104 a29k-*-coff) fmt=coff targ=ebmon29k ;;
105 a29k-amd-udi) fmt=coff targ=ebmon29k ;;
106 a29k-amd-ebmon) fmt=coff targ=ebmon29k ;;
107 a29k-nyu-sym1) fmt=coff targ=ebmon29k ;;
108 a29k-*-vxworks*) fmt=coff ;;
110 alpha-*-netware*) fmt=ecoff ;;
111 alpha-*-osf*) fmt=ecoff ;;
112 alpha-*-linux*) fmt=ecoff ;;
115 arc-*-elf*) fmt=elf bfd_gas=yes ;;
118 arm-*-riscix*) fmt=aout targ=arm-lit ;;
125 arm-*-coff) fmt=coff ;;
126 arm-*-riscix*) fmt=aout ;;
127 arm-*-pe) fmt=coff targ=armcoff em=pe ;;
129 hppa-*-*elf*) fmt=elf em=hppa ;;
130 hppa-*-lites*) fmt=elf em=hppa ;;
131 hppa-*-osf*) fmt=som em=hppa ;;
132 hppa-*-hpux*) fmt=som em=hppa ;;
133 hppa-*-bsd*) fmt=som em=hppa ;;
134 hppa-*-hiux*) fmt=som em=hppa ;;
136 h8300-*-coff) fmt=coff ;;
138 i386-ibm-aix*) fmt=coff targ=i386coff
140 i386-*-bsd*) fmt=aout em=386bsd ;;
141 i386-*-netbsd0.8) fmt=aout em=386bsd ;;
142 i386-*-netbsd*) fmt=aout em=nbsd bfd_gas=yes;;
143 i386-*-linux*aout* | i386-*-linuxoldld) fmt=aout em=linux ;;
144 i386-*-linux*coff*) fmt=coff em=linux
146 i386-*-linux*) fmt=elf em=linux ;;
147 i386-*-lynxos*) fmt=coff targ=i386coff
149 i386-*-sysv4* | i386-*-solaris* | i386-*-elf | i386-*-freebsdelf*)
151 i386-*-sco*elf*) fmt=elf targ=sco5 ;;
152 i386-*-coff | i386-*-sysv* | i386-*-sco* | i386-*-isc*)
153 fmt=coff targ=i386coff ;;
154 i386-*-vsta) fmt=aout ;;
155 i386-*-go32) fmt=coff targ=i386coff ;;
156 i386-*-gnu*) fmt=elf ;;
158 fmt=aout em=mach bfd_gas=yes ;;
159 i386-*-msdos*) fmt=aout ;;
160 i386-*-moss*) fmt=elf ;;
161 i386-*-pe) fmt=coff targ=i386coff em=pe ;;
162 i386-*-cygwin32) fmt=coff targ=i386coff em=pe ;;
163 i386-*-*nt) fmt=coff targ=i386coff em=pe ;;
164 i960-*-bout) fmt=bout ;;
165 i960-*-coff) fmt=coff em=ic960 targ=ic960coff ;;
166 i960-*-nindy*) fmt=bout ;;
167 i960-*-vxworks4*) fmt=bout ;;
168 i960-*-vxworks5.0) fmt=bout ;;
169 i960-*-vxworks5.*) fmt=coff em=ic960 targ=ic960coff ;;
170 i960-*-vxworks*) fmt=bout ;;
172 m68k-*-vxworks* | m68k-ericsson-ose | m68k-*-sunos*)
174 m68k-motorola-sysv*) fmt=coff targ=m68kcoff em=delta ;;
175 m68k-bull-sysv3*) fmt=coff targ=m68kcoff em=dpx2 ;;
176 m68k-apollo-*) fmt=coff targ=apollo em=apollo ;;
177 m68k-*-sysv4 | m68k-*-elf) # must be before -sysv*
179 m68k-*-coff | m68k-*-sysv*)
180 fmt=coff targ=m68kcoff ;;
181 m68k-*-hpux*) fmt=hp300 em=hp300 ;;
182 m68k-*-linux*aout*) fmt=aout em=linux ;;
183 m68k-*-linux*) fmt=elf em=linux ;;
184 m68k-*-lynxos*) fmt=coff targ=m68kcoff
186 m68k-*-netbsd*) fmt=aout em=nbsd bfd_gas=yes ;;
187 m68k-apple-aux*) fmt=coff targ=m68kcoff em=aux ;;
188 m68k-*-psos*) fmt=elf em=psos;;
190 m88k-motorola-sysv3*) fmt=coff targ=m88kcoff em=delt88 ;;
191 m88k-*-coff*) fmt=coff targ=m88kcoff ;;
193 # don't change em like *-*-bsd does
194 mips-dec-netbsd*) fmt=elf targ=mips-lit endian=little ;;
195 mips-dec-bsd*) fmt=aout targ=mips-lit ;;
196 mips-sony-bsd*) fmt=ecoff targ=mips-big ;;
197 mips-*-bsd*) AC_MSG_ERROR(Unknown vendor for mips-bsd configuration.) ;;
198 mips-*-ultrix*) fmt=ecoff targ=mips-lit endian=little ;;
199 mips-*-ecoff*) fmt=ecoff
201 big) targ=mips-big ;;
205 mips-*-ecoff*) fmt=ecoff targ=mips-big ;;
206 mips-*-gnu*) fmt=aout
208 big) targ=mips-big ;;
212 mips-*-irix5*) fmt=elf targ=mips-big ;;
213 mips-*-irix*) fmt=ecoff targ=mips-big ;;
214 mips-*-riscos*) fmt=ecoff targ=mips-big ;;
215 mips-*-sysv*) fmt=ecoff targ=mips-big ;;
218 big) targ=mips-big ;;
222 ppc-*-pe | ppc-*-cygwin32 | ppc-*-winnt*)
229 ppc-*-aix*) fmt=coff ;;
230 ppc-*-elf* | ppc-*-eabi* | ppc-*-sysv4*)
237 ppc-*-linux*) fmt=elf
240 *) AC_MSG_ERROR(Linux must be configured big endian) ;;
243 ppc-*-solaris*) fmt=elf
245 big) AC_MSG_ERROR(Solaris must be configured little endian) ;;
249 ppc-*-macos* | ppc-*-mpw*)
251 ppc-*-netware*) fmt=elf em=ppcnw ;;
253 sh-*-coff) fmt=coff ;;
256 rce-*-aout) fmt=aout ;;
259 ns32k-pc532-mach* | ns32k-pc532-ux*) fmt=aout em=pc532mach ;;
260 ns32k-pc532-netbsd* | ns32k-pc532-lites*) fmt=aout em=nbsd532 ;;
262 sparc-*-sunos4*) fmt=aout em=sun3 ;;
263 sparc-*-aout | sparc*-*-vxworks)
265 sparc-*-coff) fmt=coff ;;
266 sparc-*-lynxos*) fmt=coff em=lynx ;;
267 sparc-fujitsu-none) fmt=aout ;;
268 sparc-*-elf | sparc-*-solaris*)
270 sparc-*-netbsd*) fmt=aout em=nbsd bfd_gas=yes ;;
272 vax-*-bsd* | vax-*-ultrix*)
274 vax-*-vms) fmt=vms ;;
276 z8k-*-coff | z8k-*-sim)
281 *-*-aout | *-*-scout)
287 *-*-generic) fmt=generic ;;
288 *-*-xray | *-*-hms) fmt=coff ;;
290 *-*-elf | *-*-sysv4* | *-*-solaris*)
291 AC_MSG_WARN(GAS support for ${generic_target} is incomplete.)
293 *-*-vxworks) fmt=aout ;;
294 *-*-netware) fmt=elf ;;
297 case ${cpu_type}-${fmt} in
298 arm-*) bfd_gas=yes ;;
300 # i386-aout) bfd_gas=preferred ;;
301 mips-*) bfd_gas=yes ;;
302 ns32k-*) bfd_gas=yes ;;
303 ppc-*) bfd_gas=yes ;;
304 sparc-*) bfd_gas=yes ;;
305 *-elf) bfd_gas=yes ;;
306 *-ecoff) bfd_gas=yes ;;
307 *-som) bfd_gas=yes ;;
311 # Other random stuff.
313 # do we need the opcodes library?
319 if test "${shared_opcodes}" = "true"; then
320 # A shared libopcodes must be linked against libbfd.
326 test -n "$want_sparc_v9" && AC_DEFINE(SPARC_V9)
328 case ${cpu}-${vendor}-${os} in
329 sparc64-*-elf*) AC_DEFINE(SPARC_ARCH64) ;;
334 case ${extra_objects} in
336 *) extra_objects="$extra_objects m68k-parse.o" ;;
341 # See if we really can support this configuration with the emulation code.
343 if test $this_target = $target ; then
344 primary_bfd_gas=$bfd_gas
349 if test $bfd_gas = no ; then
350 # Can't support other configurations this way.
353 elif test $bfd_gas = no ; then
354 # Can't support this configuration.
358 # From target name and format, produce a list of supported emulations.
360 case ${generic_target}-${fmt} in
361 mips-*-irix5*-*) emulation="mipsbelf mipslelf mipself mipsbecoff mipslecoff mipsecoff" ;;
362 mips-*-*-ecoff) case "$endian" in
363 big) emulation="mipsbecoff mipslecoff mipsecoff" ;;
364 *) emulation="mipslecoff mipsbecoff mipsecoff" ;;
366 mips-*-*-elf) case "$endian" in
367 big) emulation="mipsbelf mipslelf mipself" ;;
368 *) emulation="mipslelf mipsbelf mipself" ;;
372 emulations="$emulations $emulation"
376 # Assign floating point type. Most processors with FP support
377 # IEEE FP. On those that don't support FP at all, usually IEEE
379 case ${target_cpu} in
380 vax | tahoe ) atof=${target_cpu} ;;
384 case "${obj_format}" in
385 "") AC_MSG_ERROR(GAS does not know what format to use for target ${target}) ;;
389 dnl Make sure the desired support files exist.
392 if test ! -r ${srcdir}/config/tc-${target_cpu_type}.c; then
393 AC_MSG_ERROR(GAS does not support target CPU ${target_cpu_type})
396 if test ! -r ${srcdir}/config/obj-${obj_format}.c; then
397 AC_MSG_ERROR(GAS does not have support for object file format ${obj_format})
400 # and target makefile frag
402 target_frag=${srcdir}/config/${gas_target}.mt
403 if test ! -r ${target_frag}; then
404 target_frag=/dev/null # ick! but subst_file can't be conditionalized
406 AC_SUBST_FILE(target_frag)
408 case ${user_bfd_gas}-${primary_bfd_gas} in
410 # We didn't override user's choice.
413 AC_MSG_WARN(Use of BFD is required for ${target}; overriding config options.)
425 # User specified nothing.
429 # Some COFF configurations want these random other flags set.
430 case ${obj_format} in
432 case ${target_cpu_type} in
433 i386) AC_DEFINE(I386COFF) ;;
434 m68k) AC_DEFINE(M68KCOFF) ;;
435 m88k) AC_DEFINE(M88KCOFF) ;;
440 # Getting this done right is going to be a bitch. Each configuration specified
441 # with --enable-targets=... should be checked for environment, format, cpu, and
444 # For each configuration, the necessary object file support code must be linked
445 # in. This might be only one, it might be up to four. The necessary emulation
446 # code needs to be provided, too.
448 # And then there's "--enable-targets=all"....
450 # For now, just always do it for MIPS ELF or ECOFF configurations. Sigh.
452 formats="${obj_format}"
456 for em in . $emulations ; do
460 fmt=elf file=mipself ;;
461 mipsbecoff | mipslecoff)
462 fmt=ecoff file=mipsecoff ;;
464 formats="$formats $fmt"
465 emfiles="$emfiles e-$file.o"
466 EMULATIONS="$EMULATIONS &$em,"
470 if test `set . $formats ; shift ; echo $#` -gt 1 ; then
471 for fmt in $formats ; do
473 aout) AC_DEFINE(OBJ_MAYBE_AOUT) ;;
474 bout) AC_DEFINE(OBJ_MAYBE_BOUT) ;;
475 coff) AC_DEFINE(OBJ_MAYBE_COFF) ;;
476 ecoff) AC_DEFINE(OBJ_MAYBE_ECOFF) ;;
477 elf) AC_DEFINE(OBJ_MAYBE_ELF) ;;
478 generic) AC_DEFINE(OBJ_MAYBE_GENERIC) ;;
479 hp300) AC_DEFINE(OBJ_MAYBE_HP300) ;;
480 ieee) AC_DEFINE(OBJ_MAYBE_IEEE) ;;
481 som) AC_DEFINE(OBJ_MAYBE_SOM) ;;
482 vms) AC_DEFINE(OBJ_MAYBE_VMS) ;;
484 extra_objects="$extra_objects obj-$fmt.o"
488 if test `set . $emfiles ; shift ; echo $#` -gt 0 ; then
490 extra_objects="$extra_objects $emfiles"
491 DEFAULT_EMULATION=`set . $emulations ; echo $2`
492 AC_DEFINE(USE_EMULATIONS)
494 AC_SUBST(extra_objects)
495 AC_DEFINE_UNQUOTED(EMULATIONS, $EMULATIONS)
496 AC_DEFINE_UNQUOTED(DEFAULT_EMULATION, "$DEFAULT_EMULATION")
498 files="config/tc-${target_cpu_type}.c config/tc-${target_cpu_type}.h \
499 config/obj-${obj_format}.h config/obj-${obj_format}.c \
500 config/te-${te_file}.h config/atof-${atof}.c \
502 links="targ-cpu.c targ-cpu.h obj-format.h obj-format.c targ-env.h atof-targ.c \
505 case ${primary_bfd_gas}-${target_cpu_type}-${obj_format} in
506 yes-*-coff) need_bfd=yes ;;
507 no-*-coff) need_bfd=yes
508 AC_DEFINE(MANY_SEGMENTS) ;;
511 reject_dev_configs=yes
513 case ${reject_dev_configs}-${dev} in
515 AC_MSG_ERROR(GAS does not support the ${generic_target} configuration.)
519 AC_SUBST(target_cpu_type)
522 dnl AC_SUBST(emulation)
524 AC_LINK_FILES($files, $links)
526 case "${primary_bfd_gas}" in
527 yes) AC_DEFINE(BFD_ASSEMBLER)
531 # do we need the opcodes library?
532 case "${need_opcodes}" in
534 OPCODES_DEP=../opcodes/libopcodes.a
535 OPCODES_LIB='-L../opcodes -lopcodes'
537 # We need to handle some special cases if opcodes was built shared.
538 if test "${shared_opcodes}" = "true"; then
541 # On SunOS, we must link against the name we are going to install,
542 # not -lbfd, since SunOS does not support SONAME.
543 OPCODES_LIB='-L../opcodes -l`echo opcodes | sed '"'"'$(program_transform_name)'"'"'`'
549 AC_SUBST(OPCODES_DEP)
550 AC_SUBST(OPCODES_LIB)
552 case "${need_bfd}" in
554 BFDDEP=../bfd/libbfd.a
555 BFDLIB='-L../bfd -lbfd'
556 ALL_OBJ_DEPS="$ALL_OBJ_DEPS ../bfd/bfd.h"
558 # We need to handle some special cases if BFD was built shared.
559 if test "${shared_bfd}" = "true"; then
562 # On SunOS, we must link against the name we are going to install,
563 # not -lbfd, since SunOS does not support SONAME.
564 BFDLIB='-L../bfd -l`echo bfd | sed '"'"'$(program_transform_name)'"'"'`'
572 AC_SUBST(ALL_OBJ_DEPS)
574 AC_DEFINE_UNQUOTED(TARGET_ALIAS, "${target_alias}")
575 AC_DEFINE_UNQUOTED(TARGET_CANONICAL, "${target}")
576 AC_DEFINE_UNQUOTED(TARGET_CPU, "${target_cpu}")
577 AC_DEFINE_UNQUOTED(TARGET_VENDOR, "${target_vendor}")
578 AC_DEFINE_UNQUOTED(TARGET_OS, "${target_os}")
583 AC_CHECK_HEADERS(string.h stdlib.h memory.h strings.h unistd.h stdarg.h varargs.h errno.h sys/types.h)
585 # Put this here so that autoconf's "cross-compiling" message doesn't confuse
586 # people who are not cross-compiling but are compiling cross-assemblers.
587 AC_MSG_CHECKING(whether compiling a cross-assembler)
588 if test "${host}" = "${target}"; then
592 AC_DEFINE(CROSS_COMPILE)
594 AC_MSG_RESULT($cross_gas)
596 dnl ansidecl.h will deal with const
601 # VMS doesn't have unlink.
602 AC_CHECK_FUNCS(unlink remove, break)
604 # Some systems don't have sbrk().
607 # Some non-ANSI preprocessors botch requoting inside strings. That's bad
608 # enough, but on some of those systems, the assert macro relies on requoting
612 # On some systems, the system header files may not declare malloc, realloc,
613 # and free. There are places where gas needs these functions to have been
614 # declared -- such as when taking their addresses.
629 GAS_CHECK_DECL_NEEDED(malloc, f, char *(*f)(), $gas_test_headers)
630 GAS_CHECK_DECL_NEEDED(free, f, void (*f)(), $gas_test_headers)
632 # Does errno.h declare errno, or do we have to add a separate declaration
634 GAS_CHECK_DECL_NEEDED(errno, f, int f, [
641 RPATH_ENVVAR=LD_LIBRARY_PATH
642 # If we have shared libraries, try to set rpath reasonably.
643 if test "${shared}" = "true"; then
646 HLDFLAGS='-Wl,+s,+b,$(libdir)'
647 RPATH_ENVVAR=SHLIB_PATH
650 HLDFLAGS='-Wl,-rpath,$(libdir)'
655 HLDFLAGS='-Wl,-rpath,$(libdir)'
657 *-*-sysv4* | *-*-solaris*)
658 HLDFLAGS='-R $(libdir)'
663 # On SunOS, if the linker supports the -rpath option, use it to
664 # prevent ../bfd and ../opcodes from being included in the run time
668 echo 'main () { }' > conftest.c
669 ${CC} -o conftest -Wl,-rpath= conftest.c >/dev/null 2>conftest.t
670 if grep 'unrecognized' conftest.t >/dev/null 2>&1; then
672 elif grep 'No such file' conftest.t >/dev/null 2>&1; then
674 elif grep 'do not mix' conftest.t >/dev/null 2>&1; then
676 elif test "${shared}" = "true"; then
677 HLDFLAGS='-Wl,-rpath=$(libdir)'
679 HLDFLAGS='-Wl,-rpath='
681 rm -f conftest.t conftest.c conftest
685 AC_SUBST(RPATH_ENVVAR)
687 dnl This must come last.
688 AC_OUTPUT(Makefile doc/Makefile .gdbinit:gdbinit.in)