1 dnl Process this file with autoconf to produce a configure script.
3 dnl And be careful when changing it! If you must add tests with square
4 dnl brackets, be sure changequote invocations surround it.
7 AC_PREREQ(2.3)dnl We only need 2.0, but pre-2.3 loses on some AIX version.
11 AC_ARG_ENABLE(bfd-assembler,
12 [ --enable-bfd-assembler use BFD back end for writing object files],
13 [case "${enableval}" in
14 yes) need_bfd=yes user_bfd_gas=yes ;;
15 no) user_bfd_gas=no ;;
16 *) AC_MSG_ERROR(bad value ${enableval} given for bfd-assembler option) ;;
18 AC_ARG_ENABLE(targets,
19 [ targets alternative target configurations besides the primary],
20 [case "${enableval}" in
21 yes | "") AC_ERROR(enable-targets option must specify target names or 'all')
23 no) enable_targets= ;;
24 *) enable_targets=$enableval ;;
27 [ --enable-shared build shared BFD library],
28 [case "${enableval}" in
31 *) AC_MSG_ERROR([bad value ${enableval} for BFD shared option]) ;;
34 # Generate a header file -- gets more post-processing by Makefile later.
35 AC_CONFIG_HEADER(conf)
37 dnl For recursion to work right, this must be an absolute pathname.
38 AC_CONFIG_AUX_DIR(`cd $srcdir;pwd`/..)
45 if test -n "$enable_targets" ; then
46 for t in `echo $enable_targets | sed 's/,/ /g'`; do
47 result=`$ac_config_sub $t 2>/dev/null`
48 if test -n "$result" ; then
49 canon_targets="$canon_targets $result"
51 # # Permit "all", etc. We don't support it yet though.
52 # canon_targets="$canon_targets $t"
55 GAS_UNIQ(canon_targets)
60 for this_target in $target $canon_targets ; do
62 eval `echo $this_target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/cpu=\1 vendor=\2 os=\3/'`
64 # check for architecture variants
66 armeb) cpu_type=arm endian=big ;;
67 arm*) cpu_type=arm endian=little ;;
68 hppa*) cpu_type=hppa ;;
70 i[456]86) cpu_type=i386 ;;
71 m680[012346]0) cpu_type=m68k ;;
72 m68008) cpu_type=m68k ;;
73 m683??) cpu_type=m68k ;;
76 mips*el) cpu_type=mips endian=little;;
77 mips*) cpu_type=mips endian=big ;;
78 powerpcle*) cpu_type=ppc endian=little ;;
79 powerpc*) cpu_type=ppc endian=big ;;
80 rs6000*) cpu_type=ppc ;;
81 sparc64) cpu_type=sparc want_sparc_v9=true ;;
82 sparc*) cpu_type=sparc ;;
86 if test ${this_target} = $target ; then
87 target_cpu_type=${cpu_type}
88 elif test ${target_cpu_type} != ${cpu_type} ; then
93 generic_target=${cpu_type}-$vendor-$os
98 # assign object format
99 case ${generic_target} in
100 a29k-amd-udi) fmt=coff targ=ebmon29k ;;
101 a29k-amd-ebmon) fmt=coff targ=ebmon29k ;;
102 a29k-nyu-sym1) fmt=coff targ=ebmon29k ;;
103 a29k-*-vxworks*) fmt=coff ;;
105 alpha-*-netware*) fmt=ecoff ;;
106 alpha-*-osf*) fmt=ecoff ;;
107 alpha-*-linux*) fmt=ecoff ;;
110 arc-*-elf*) fmt=elf bfd_gas=yes ;;
113 arm-*-riscix*) fmt=aout targ=arm-lit ;;
120 arm-*-coff) fmt=coff ;;
121 arm-*-riscix*) fmt=aout ;;
122 arm-*-pe) fmt=coff targ=armcoff em=pe ;;
124 hppa-*-*elf*) fmt=elf em=hppa ;;
125 hppa-*-lites*) fmt=elf em=hppa ;;
126 hppa-*-osf*) fmt=som em=hppa ;;
127 hppa-*-hpux*) fmt=som em=hppa ;;
128 hppa-*-bsd*) fmt=som em=hppa ;;
129 hppa-*-hiux*) fmt=som em=hppa ;;
131 h8300-*-coff) fmt=coff ;;
133 i386-ibm-aix*) fmt=coff targ=i386coff
135 i386-*-bsd*) fmt=aout em=386bsd ;;
136 i386-*-netbsd0.8) fmt=aout em=386bsd ;;
137 i386-*-netbsd*) fmt=aout em=nbsd bfd_gas=yes;;
138 i386-*-linux*aout* | i386-*-linuxoldld) fmt=aout em=linux ;;
139 i386-*-linux*coff*) fmt=coff em=linux
141 i386-*-linux*) fmt=elf em=linux ;;
142 i386-*-lynxos*) fmt=coff targ=i386coff
144 i386-*-sysv4* | i386-*-solaris* | i386-*-elf)
146 i386-*-sco*elf*) fmt=elf targ=sco5 ;;
147 i386-*-coff | i386-*-sysv* | i386-*-sco* | i386-*-isc*)
148 fmt=coff targ=i386coff ;;
149 i386-*-vsta) fmt=aout ;;
150 i386-*-go32) fmt=coff targ=i386coff ;;
151 i386-*-gnu*) fmt=elf ;;
153 fmt=aout em=mach bfd_gas=yes ;;
154 i386-*-msdos*) fmt=aout ;;
155 i386-*-moss*) fmt=elf ;;
156 i386-*-pe) fmt=coff targ=i386coff em=pe bfd_gas=yes;;
157 i386-*-cygwin32) fmt=coff targ=i386coff em=pe bfd_gas=yes;;
158 i386-*-*nt) fmt=coff targ=i386coff em=pe bfd_gas=yes;;
159 i960-*-bout) fmt=bout ;;
160 i960-*-coff) fmt=coff em=ic960 targ=ic960coff ;;
161 i960-*-nindy*) fmt=bout ;;
162 i960-*-vxworks4*) fmt=bout ;;
163 i960-*-vxworks5.0) fmt=bout ;;
164 i960-*-vxworks5.*) fmt=coff em=ic960 targ=ic960coff ;;
165 i960-*-vxworks*) fmt=bout ;;
167 m68k-*-vxworks* | m68k-ericsson-ose | m68k-*-sunos*)
169 m68k-motorola-sysv*) fmt=coff targ=m68kcoff em=delta ;;
170 m68k-bull-sysv3*) fmt=coff targ=m68kcoff em=dpx2 ;;
171 m68k-apollo-*) fmt=coff targ=apollo em=apollo ;;
172 m68k-*-sysv4 | m68k-*-elf) # must be before -sysv*
174 m68k-*-coff | m68k-*-sysv*)
175 fmt=coff targ=m68kcoff ;;
176 m68k-*-hpux*) fmt=hp300 em=hp300 ;;
177 m68k-*-lynxos*) fmt=coff targ=m68kcoff
179 m68k-*-netbsd*) fmt=aout em=nbsd bfd_gas=yes ;;
180 m68k-apple-aux*) fmt=coff targ=m68kcoff em=aux ;;
181 m68k-*-psos*) fmt=elf em=psos;;
183 m88k-motorola-sysv3*) fmt=coff targ=m88kcoff em=delt88 ;;
184 m88k-*-coff*) fmt=coff targ=m88kcoff ;;
186 # don't change em like *-*-bsd does
187 mips-dec-netbsd*) fmt=elf targ=mips-lit endian=little ;;
188 mips-dec-bsd*) fmt=aout targ=mips-lit ;;
189 mips-sony-bsd*) fmt=ecoff targ=mips-big ;;
190 mips-*-bsd*) AC_MSG_ERROR(Unknown vendor for mips-bsd configuration.) ;;
191 mips-*-ultrix*) fmt=ecoff targ=mips-lit endian=little ;;
192 mips-*-ecoff*) fmt=ecoff
194 big) targ=mips-big ;;
198 mips-*-ecoff*) fmt=ecoff targ=mips-big ;;
199 mips-*-gnu*) fmt=aout
201 big) targ=mips-big ;;
205 mips-*-irix5*) fmt=elf targ=mips-big ;;
206 mips-*-irix*) fmt=ecoff targ=mips-big ;;
207 mips-*-riscos*) fmt=ecoff targ=mips-big ;;
208 mips-*-sysv*) fmt=ecoff targ=mips-big ;;
211 big) targ=mips-big ;;
215 ppc-*-pe | ppc-*-cygwin32 | ppc-*-winnt*)
222 ppc-*-aix*) fmt=coff ;;
223 ppc-*-elf* | ppc-*-eabi* | ppc-*-sysv4*)
230 ppc-*-macos* | ppc-*-mpw*)
232 ppc-*-netware*) fmt=elf em=ppcnw ;;
234 sh-*-coff) fmt=coff ;;
237 rce-*-aout) fmt=aout ;;
240 ns32k-pc532-mach* | ns32k-pc532-ux*) fmt=aout em=pc532mach ;;
241 ns32k-pc532-netbsd* | ns32k-pc532-lites*) fmt=aout em=nbsd532 ;;
243 sparc-*-sunos4*) fmt=aout em=sun3 ;;
244 sparc-*-aout | sparc*-*-vxworks)
246 sparc-*-coff) fmt=coff ;;
247 sparc-*-lynxos*) fmt=coff em=lynx ;;
248 sparc-fujitsu-none) fmt=aout ;;
249 sparc-*-elf | sparc*-*-solaris*)
251 sparc-*-netbsd*) fmt=aout em=nbsd bfd_gas=yes ;;
253 vax-*-bsd* | vax-*-ultrix*)
255 vax-*-vms) fmt=vms ;;
257 z8k-*-coff | z8k-*-sim)
262 *-*-aout | *-*-scout)
268 *-*-generic) fmt=generic ;;
269 *-*-xray | *-*-hms) fmt=coff ;;
271 *-*-elf | *-*-sysv4* | *-*-solaris*)
272 AC_MSG_WARN(GAS support for ${generic_target} is incomplete.)
274 *-*-vxworks) fmt=aout ;;
275 *-*-netware) fmt=elf ;;
278 case ${cpu_type}-${fmt} in
279 arm-*) bfd_gas=yes ;;
281 # i386-aout) bfd_gas=preferred ;;
282 mips-*) bfd_gas=yes ;;
283 ns32k-*) bfd_gas=yes ;;
284 ppc-*) bfd_gas=yes ;;
285 sparc-*) bfd_gas=yes ;;
286 *-elf) bfd_gas=yes ;;
287 *-ecoff) bfd_gas=yes ;;
288 *-som) bfd_gas=yes ;;
292 # Other random stuff.
294 # do we need the opcodes library?
300 if test "${shared}" = "true"; then
301 # A shared libopcodes must be linked against libbfd.
307 test -n "$want_sparc_v9" && AC_DEFINE(SPARC_V9)
309 case ${cpu}-${vendor}-${os} in
310 sparc64-*-elf*) AC_DEFINE(SPARC_ARCH64) ;;
315 case ${extra_objects} in
317 *) extra_objects="$extra_objects m68k-parse.o" ;;
322 # See if we really can support this configuration with the emulation code.
324 if test $this_target = $target ; then
325 primary_bfd_gas=$bfd_gas
330 if test $bfd_gas = no ; then
331 # Can't support other configurations this way.
334 elif test $bfd_gas = no ; then
335 # Can't support this configuration.
339 # From target name and format, produce a list of supported emulations.
341 case ${generic_target}-${fmt} in
342 mips-*-irix5*-*) emulation="mipsbelf mipslelf mipself mipsbecoff mipslecoff mipsecoff" ;;
343 mips-*-*-ecoff) case "$endian" in
344 big) emulation="mipsbecoff mipslecoff mipsecoff" ;;
345 *) emulation="mipslecoff mipsbecoff mipsecoff" ;;
347 mips-*-*-elf) case "$endian" in
348 big) emulation="mipsbelf mipslelf mipself" ;;
349 *) emulation="mipslelf mipsbelf mipself" ;;
353 emulations="$emulations $emulation"
357 # Assign floating point type. Most processors with FP support
358 # IEEE FP. On those that don't support FP at all, usually IEEE
360 case ${target_cpu} in
361 vax | tahoe ) atof=${target_cpu} ;;
365 case "${obj_format}" in
366 "") AC_MSG_ERROR(GAS does not know what format to use for target ${target}) ;;
370 dnl Make sure the desired support files exist.
373 if test ! -r ${srcdir}/config/tc-${target_cpu_type}.c; then
374 AC_MSG_ERROR(GAS does not support target CPU ${target_cpu_type})
377 if test ! -r ${srcdir}/config/obj-${obj_format}.c; then
378 AC_MSG_ERROR(GAS does not have support for object file format ${obj_format})
381 # and target makefile frag
383 target_frag=${srcdir}/config/${gas_target}.mt
384 if test ! -r ${target_frag}; then
385 target_frag=/dev/null # ick! but subst_file can't be conditionalized
387 AC_SUBST_FILE(target_frag)
389 case ${user_bfd_gas}-${primary_bfd_gas} in
391 # We didn't override user's choice.
394 AC_MSG_WARN(Use of BFD is required for ${target}; overriding config options.)
406 # User specified nothing.
410 # Some COFF configurations want these random other flags set.
411 case ${obj_format} in
413 case ${target_cpu_type} in
414 i386) AC_DEFINE(I386COFF) ;;
415 m68k) AC_DEFINE(M68KCOFF) ;;
416 m88k) AC_DEFINE(M88KCOFF) ;;
421 # Getting this done right is going to be a bitch. Each configuration specified
422 # with --enable-targets=... should be checked for environment, format, cpu, and
425 # For each configuration, the necessary object file support code must be linked
426 # in. This might be only one, it might be up to four. The necessary emulation
427 # code needs to be provided, too.
429 # And then there's "--enable-targets=all"....
431 # For now, just always do it for MIPS ELF or ECOFF configurations. Sigh.
433 formats="${obj_format}"
437 for em in . $emulations ; do
441 fmt=elf file=mipself ;;
442 mipsbecoff | mipslecoff)
443 fmt=ecoff file=mipsecoff ;;
445 formats="$formats $fmt"
446 emfiles="$emfiles e-$file.o"
447 EMULATIONS="$EMULATIONS &$em,"
451 if test `set . $formats ; shift ; echo $#` -gt 1 ; then
452 for fmt in $formats ; do
454 aout) AC_DEFINE(OBJ_MAYBE_AOUT) ;;
455 bout) AC_DEFINE(OBJ_MAYBE_BOUT) ;;
456 coff) AC_DEFINE(OBJ_MAYBE_COFF) ;;
457 ecoff) AC_DEFINE(OBJ_MAYBE_ECOFF) ;;
458 elf) AC_DEFINE(OBJ_MAYBE_ELF) ;;
459 generic) AC_DEFINE(OBJ_MAYBE_GENERIC) ;;
460 hp300) AC_DEFINE(OBJ_MAYBE_HP300) ;;
461 ieee) AC_DEFINE(OBJ_MAYBE_IEEE) ;;
462 som) AC_DEFINE(OBJ_MAYBE_SOM) ;;
463 vms) AC_DEFINE(OBJ_MAYBE_VMS) ;;
465 extra_objects="$extra_objects obj-$fmt.o"
469 if test `set . $emfiles ; shift ; echo $#` -gt 0 ; then
471 extra_objects="$extra_objects $emfiles"
472 DEFAULT_EMULATION=`set . $emulations ; echo $2`
473 AC_DEFINE(USE_EMULATIONS)
475 AC_SUBST(extra_objects)
476 AC_DEFINE_UNQUOTED(EMULATIONS, $EMULATIONS)
477 AC_DEFINE_UNQUOTED(DEFAULT_EMULATION, "$DEFAULT_EMULATION")
479 files="config/tc-${target_cpu_type}.c config/tc-${target_cpu_type}.h \
480 config/obj-${obj_format}.h config/obj-${obj_format}.c \
481 config/te-${te_file}.h config/atof-${atof}.c \
483 links="targ-cpu.c targ-cpu.h obj-format.h obj-format.c targ-env.h atof-targ.c \
486 case ${primary_bfd_gas}-${target_cpu_type}-${obj_format} in
487 yes-*-coff) need_bfd=yes ;;
488 no-*-coff) need_bfd=yes
489 AC_DEFINE(MANY_SEGMENTS) ;;
492 reject_dev_configs=yes
494 case ${reject_dev_configs}-${dev} in
496 AC_MSG_ERROR(GAS does not support the ${generic_target} configuration.)
500 AC_SUBST(target_cpu_type)
503 dnl AC_SUBST(emulation)
505 AC_LINK_FILES($files, $links)
507 case "${primary_bfd_gas}" in
508 yes) AC_DEFINE(BFD_ASSEMBLER)
512 # do we need the opcodes library?
513 case "${need_opcodes}" in
515 OPCODES_DEP=../opcodes/libopcodes.a
516 OPCODES_LIB='-L../opcodes -lopcodes'
518 # We need to handle some special cases if opcodes was built shared.
519 if test "${shared}" = "true"; then
522 # On SunOS, we must link against the name we are going to install,
523 # not -lbfd, since SunOS does not support SONAME.
524 OPCODES_LIB='-L../opcodes -l`echo opcodes | sed '"'"'$(program_transform_name)'"'"'`'
530 AC_SUBST(OPCODES_DEP)
531 AC_SUBST(OPCODES_LIB)
533 case "${need_bfd}" in
535 BFDDEP=../bfd/libbfd.a
536 BFDLIB='-L../bfd -lbfd'
537 ALL_OBJ_DEPS="$ALL_OBJ_DEPS ../bfd/bfd.h"
539 # We need to handle some special cases if BFD was built shared.
540 if test "${shared}" = "true"; then
543 # On SunOS, we must link against the name we are going to install,
544 # not -lbfd, since SunOS does not support SONAME.
545 BFDLIB='-L../bfd -l`echo bfd | sed '"'"'$(program_transform_name)'"'"'`'
553 AC_SUBST(ALL_OBJ_DEPS)
555 AC_DEFINE_UNQUOTED(TARGET_ALIAS, "${target_alias}")
556 AC_DEFINE_UNQUOTED(TARGET_CANONICAL, "${target}")
557 AC_DEFINE_UNQUOTED(TARGET_CPU, "${target_cpu}")
558 AC_DEFINE_UNQUOTED(TARGET_VENDOR, "${target_vendor}")
559 AC_DEFINE_UNQUOTED(TARGET_OS, "${target_os}")
564 AC_CHECK_HEADERS(string.h stdlib.h memory.h strings.h unistd.h stdarg.h varargs.h errno.h sys/types.h)
566 # Put this here so that autoconf's "cross-compiling" message doesn't confuse
567 # people who are not cross-compiling but are compiling cross-assemblers.
568 AC_MSG_CHECKING(whether compiling a cross-assembler)
569 if test "${host}" = "${target}"; then
573 AC_DEFINE(CROSS_COMPILE)
575 AC_MSG_RESULT($cross_gas)
577 dnl ansidecl.h will deal with const
582 # VMS doesn't have unlink.
583 AC_CHECK_FUNCS(unlink remove, break)
585 # Some systems don't have sbrk().
588 # Some non-ANSI preprocessors botch requoting inside strings. That's bad
589 # enough, but on some of those systems, the assert macro relies on requoting
593 # On some systems, the system header files may not declare malloc, realloc,
594 # and free. There are places where gas needs these functions to have been
595 # declared -- such as when taking their addresses.
610 GAS_CHECK_DECL_NEEDED(malloc, f, char *(*f)(), $gas_test_headers)
611 GAS_CHECK_DECL_NEEDED(free, f, void (*f)(), $gas_test_headers)
613 # Does errno.h declare errno, or do we have to add a separate declaration
615 GAS_CHECK_DECL_NEEDED(errno, f, int f, [
622 RPATH_ENVVAR=LD_LIBRARY_PATH
623 # If we have shared libraries, try to set rpath reasonably.
624 if test "${shared}" = "true"; then
627 HLDFLAGS='-Wl,+s,+b,$(libdir)'
628 RPATH_ENVVAR=SHLIB_PATH
631 HLDFLAGS='-Wl,-rpath,$(libdir)'
636 HLDFLAGS='-Wl,-rpath,$(libdir)'
638 *-*-sysv4* | *-*-solaris*)
639 HLDFLAGS='-R $(libdir)'
644 # On SunOS, if the linker supports the -rpath option, use it to
645 # prevent ../bfd and ../opcodes from being included in the run time
649 echo 'main () { }' > conftest.c
650 ${CC} -o conftest -Wl,-rpath= conftest.c >/dev/null 2>conftest.t
651 if grep 'unrecognized' conftest.t >/dev/null 2>&1; then
653 elif grep 'No such file' conftest.t >/dev/null 2>&1; then
655 elif test "${shared}" = "true"; then
656 HLDFLAGS='-Wl,-rpath=$(libdir)'
658 HLDFLAGS='-Wl,-rpath='
660 rm -f conftest.t conftest.c conftest
664 AC_SUBST(RPATH_ENVVAR)
666 dnl This must come last.
667 AC_OUTPUT(Makefile doc/Makefile .gdbinit:gdbinit.in)