* listing.c (print_lines): Add lineno parameter. Change all
[deliverable/binutils-gdb.git] / gas / configure.in
1 dnl Process this file with autoconf to produce a configure script.
2 dnl
3 dnl And be careful when changing it! If you must add tests with square
4 dnl brackets, be sure changequote invocations surround it.
5 dnl
6 dnl
7 AC_PREREQ(2.5)dnl v2.5 needed for --bindir et al
8 AC_INIT(as.h)dnl
9 dnl
10 user_bfd_gas=
11 AC_ARG_ENABLE(bfd-assembler,
12 [ --enable-bfd-assembler use BFD back end for writing object files],
13 [case "${enableval}" in
14 yes) need_bfd=yes user_bfd_gas=yes ;;
15 no) user_bfd_gas=no ;;
16 *) AC_MSG_ERROR(bad value ${enableval} given for bfd-assembler option) ;;
17 esac])dnl
18 AC_ARG_ENABLE(targets,
19 [ targets alternative target configurations besides the primary],
20 [case "${enableval}" in
21 yes | "") AC_ERROR(enable-targets option must specify target names or 'all')
22 ;;
23 no) enable_targets= ;;
24 *) enable_targets=$enableval ;;
25 esac])dnl
26 AC_ARG_ENABLE(shared,
27 [ --enable-shared build shared BFD library],
28 [case "${enableval}" in
29 yes) shared=true shared_bfd=true shared_opcodes=true ;;
30 no) shared=false ;;
31 *bfd*opcodes*) shared=true shared_bfd=true shared_opcodes=true ;;
32 *opcodes*bfd*) shared=true shared_bfd=true shared_opcodes=true ;;
33 *bfd*) shared=true shared_bfd=true ;;
34 *opcodes*) shared=true shared_opcodes=true ;;
35 *) shared=false ;;
36 esac])dnl
37
38 # Generate a header file -- gets more post-processing by Makefile later.
39 AC_CONFIG_HEADER(conf)
40
41 dnl For recursion to work right, this must be an absolute pathname.
42 AC_CONFIG_AUX_DIR(`cd $srcdir;pwd`/..)
43 AC_CANONICAL_SYSTEM
44 AC_ARG_PROGRAM
45
46 te_file=generic
47
48 canon_targets=""
49 if test -n "$enable_targets" ; then
50 for t in `echo $enable_targets | sed 's/,/ /g'`; do
51 result=`$ac_config_sub $t 2>/dev/null`
52 if test -n "$result" ; then
53 canon_targets="$canon_targets $result"
54 # else
55 # # Permit "all", etc. We don't support it yet though.
56 # canon_targets="$canon_targets $t"
57 fi
58 done
59 GAS_UNIQ(canon_targets)
60 fi
61
62 emulations=""
63
64 for this_target in $target $canon_targets ; do
65
66 changequote(,)dnl
67 eval `echo $this_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/cpu=\1 vendor=\2 os=\3/'`
68 changequote([,])dnl
69
70 # check for architecture variants
71 case ${cpu} in
72 armeb) cpu_type=arm endian=big ;;
73 arm*) cpu_type=arm endian=little ;;
74 hppa*) cpu_type=hppa ;;
75 changequote(,)dnl
76 i[456]86) cpu_type=i386 ;;
77 m680[012346]0) cpu_type=m68k ;;
78 m68008) cpu_type=m68k ;;
79 m683??) cpu_type=m68k ;;
80 changequote([,])dnl
81 m8*) cpu_type=m88k ;;
82 mips*el) cpu_type=mips endian=little ;;
83 mips*) cpu_type=mips endian=big ;;
84 powerpcle*) cpu_type=ppc endian=little ;;
85 powerpc*) cpu_type=ppc endian=big ;;
86 rs6000*) cpu_type=ppc ;;
87 sparc64) cpu_type=sparc want_sparc_v9=true ;;
88 sparc*) cpu_type=sparc ;;
89 *) cpu_type=${cpu} ;;
90 esac
91
92 if test ${this_target} = $target ; then
93 target_cpu_type=${cpu_type}
94 elif test ${target_cpu_type} != ${cpu_type} ; then
95 continue
96 fi
97
98 targ=${cpu_type}
99 generic_target=${cpu_type}-$vendor-$os
100 dev=no
101 bfd_gas=no
102 em=generic
103
104 # assign object format
105 case ${generic_target} in
106 a29k-*-coff) fmt=coff targ=ebmon29k ;;
107 a29k-amd-udi) fmt=coff targ=ebmon29k ;;
108 a29k-amd-ebmon) fmt=coff targ=ebmon29k ;;
109 a29k-nyu-sym1) fmt=coff targ=ebmon29k ;;
110 a29k-*-vxworks*) fmt=coff ;;
111
112 alpha-*-*vms*) fmt=evax ;;
113 alpha-*-netware*) fmt=ecoff ;;
114 alpha-*-osf*) fmt=ecoff ;;
115 alpha-*-linuxecoff*) fmt=ecoff ;;
116 alpha-*-linux*) fmt=elf em=linux ;;
117
118 # start-sanitize-arc
119 arc-*-elf*) fmt=elf bfd_gas=yes ;;
120 # end-sanitize-arc
121
122 arm-*-riscix*) fmt=aout targ=arm-lit em=riscix ;;
123 arm-*-aout) fmt=aout
124 case "$endian" in
125 big) targ=arm-big ;;
126 *) targ=arm-lit ;;
127 esac
128 ;;
129 arm-*-coff) fmt=coff ;;
130 arm-*-riscix*) fmt=aout ;;
131 arm-*-pe) fmt=coff targ=armcoff em=pe ;;
132
133 d10v-*-*) fmt=elf bfd_gas=yes ;;
134 # start-sanitize-d30v
135 d30v-*-*) fmt=elf bfd_gas=yes ;;
136 # end-sanitize-d30v
137
138 hppa-*-*elf*) fmt=elf em=hppa ;;
139 hppa-*-lites*) fmt=elf em=hppa ;;
140 hppa-*-osf*) fmt=som em=hppa ;;
141 hppa-*-hpux*) fmt=som em=hppa ;;
142 hppa-*-bsd*) fmt=som em=hppa ;;
143 hppa-*-hiux*) fmt=som em=hppa ;;
144
145 h8300-*-coff) fmt=coff ;;
146
147 i386-ibm-aix*) fmt=coff targ=i386coff
148 em=i386aix ;;
149 i386-sequent-bsd*) fmt=aout em=dynix bfd_gas=yes ;;
150 i386-*-bsd*) fmt=aout em=386bsd ;;
151 i386-*-netbsd0.8) fmt=aout em=386bsd ;;
152 i386-*-netbsd*) fmt=aout em=nbsd bfd_gas=yes;;
153 i386-*-linux*aout* | i386-*-linuxoldld) fmt=aout em=linux ;;
154 i386-*-linux*coff*) fmt=coff em=linux
155 targ=i386coff ;;
156 i386-*-linux*) fmt=elf em=linux ;;
157 i386-*-lynxos*) fmt=coff targ=i386coff
158 em=lynx ;;
159 i386-*-sysv4* | i386-*-solaris* | i386-*-elf | i386-*-freebsdelf*)
160 fmt=elf ;;
161 i386-*-sco*elf*) fmt=elf targ=sco5 ;;
162 i386-*-coff | i386-*-sysv* | i386-*-sco* | i386-*-isc*)
163 fmt=coff targ=i386coff ;;
164 i386-*-vsta) fmt=aout ;;
165 i386-*-go32) fmt=coff targ=i386coff ;;
166 i386-*-rtems*) fmt=coff targ=i386coff ;;
167 i386-*-gnu*) fmt=elf ;;
168 i386-*-mach*)
169 fmt=aout em=mach bfd_gas=yes ;;
170 i386-*-msdos*) fmt=aout ;;
171 i386-*-moss*) fmt=elf ;;
172 i386-*-pe) fmt=coff targ=i386coff em=pe ;;
173 i386-*-cygwin32) fmt=coff targ=i386coff em=pe ;;
174 i386-*-*nt) fmt=coff targ=i386coff em=pe ;;
175 i960-*-bout) fmt=bout ;;
176 i960-*-coff) fmt=coff em=ic960 targ=ic960coff ;;
177 i960-*-rtems*) fmt=coff em=ic960 targ=ic960coff ;;
178 i960-*-nindy*) fmt=bout ;;
179 i960-*-vxworks4*) fmt=bout ;;
180 i960-*-vxworks5.0) fmt=bout ;;
181 i960-*-vxworks5.*) fmt=coff em=ic960 targ=ic960coff ;;
182 i960-*-vxworks*) fmt=bout ;;
183
184 m68k-*-vxworks* | m68k-ericsson-ose | m68k-*-sunos*)
185 fmt=aout em=sun3 ;;
186 m68k-motorola-sysv*) fmt=coff targ=m68kcoff em=delta ;;
187 m68k-bull-sysv3*) fmt=coff targ=m68kcoff em=dpx2 ;;
188 m68k-apollo-*) fmt=coff targ=apollo em=apollo ;;
189 m68k-*-sysv4*) # must be before -sysv*
190 fmt=elf em=svr4 ;;
191 m68k-*-elf*) fmt=elf ;;
192 m68k-*-coff | m68k-*-sysv* | m68k-*-rtems*)
193 fmt=coff targ=m68kcoff ;;
194 m68k-*-hpux*) fmt=hp300 em=hp300 ;;
195 m68k-*-linux*aout*) fmt=aout em=linux ;;
196 m68k-*-linux*) fmt=elf em=linux ;;
197 m68k-*-lynxos*) fmt=coff targ=m68kcoff
198 em=lynx ;;
199 m68k-*-netbsd*) fmt=aout em=nbsd bfd_gas=yes ;;
200 m68k-apple-aux*) fmt=coff targ=m68kcoff em=aux ;;
201 m68k-*-psos*) fmt=elf em=psos;;
202
203 m88k-motorola-sysv3*) fmt=coff targ=m88kcoff em=delt88 ;;
204 m88k-*-coff*) fmt=coff targ=m88kcoff ;;
205
206 # don't change em like *-*-bsd does
207 mips-dec-netbsd*) fmt=elf targ=mips-lit endian=little ;;
208 mips-dec-bsd*) fmt=aout targ=mips-lit ;;
209 mips-sony-bsd*) fmt=ecoff targ=mips-big ;;
210 mips-*-bsd*) AC_MSG_ERROR(Unknown vendor for mips-bsd configuration.) ;;
211 mips-*-ultrix*) fmt=ecoff targ=mips-lit endian=little ;;
212 mips-*-osf*) fmt=ecoff targ=mips-lit endian=little ;;
213 mips-*-ecoff*) fmt=ecoff
214 case "$endian" in
215 big) targ=mips-big ;;
216 *) targ=mips-lit ;;
217 esac
218 ;;
219 mips-*-ecoff*) fmt=ecoff targ=mips-big ;;
220 mips-*-gnu*) fmt=aout
221 case "$endian" in
222 big) targ=mips-big ;;
223 *) targ=mips-lit ;;
224 esac
225 ;;
226 mips-*-irix6*) fmt=elf targ=mips-big ;;
227 mips-*-irix5*) fmt=elf targ=mips-big ;;
228 mips-*-irix*) fmt=ecoff targ=mips-big ;;
229 mips-*-riscos*) fmt=ecoff targ=mips-big ;;
230 mips-*-sysv*) fmt=ecoff targ=mips-big ;;
231 mips-*-elf* | mips-*-rtems* | mips-*-linux*)
232 fmt=elf
233 case "$endian" in
234 big) targ=mips-big ;;
235 *) targ=mips-lit ;;
236 esac
237 ;;
238 mn10200-*-*) fmt=elf bfd_gas=yes ;;
239 mn10300-*-*) fmt=elf bfd_gas=yes ;;
240 ppc-*-pe | ppc-*-cygwin32 | ppc-*-winnt*)
241 fmt=coff em=pe
242 case "$endian" in
243 big) targ=ppc-big ;;
244 *) targ=ppc-lit ;;
245 esac
246 ;;
247 ppc-*-aix*) fmt=coff ;;
248 ppc-*-elf* | ppc-*-eabi* | ppc-*-sysv4*)
249 fmt=elf
250 case "$endian" in
251 big) targ=ppc-big ;;
252 *) targ=ppc-lit ;;
253 esac
254 ;;
255 ppc-*-linux*) fmt=elf
256 case "$endian" in
257 big) targ=ppc-big ;;
258 *) AC_MSG_ERROR(Linux must be configured big endian) ;;
259 esac
260 ;;
261 ppc-*-solaris*) fmt=elf
262 case "$endian" in
263 big) AC_MSG_ERROR(Solaris must be configured little endian) ;;
264 *) targ=ppc-sol ;;
265 esac
266 ;;
267 ppc-*-rtems*)
268 fmt=elf
269 case "$endian" in
270 big) targ=ppc-big ;;
271 *) targ=ppc-lit ;;
272 esac
273 ;;
274 ppc-*-macos* | ppc-*-mpw*)
275 fmt=coff em=macos ;;
276 ppc-*-netware*) fmt=elf em=ppcnw ;;
277
278 sh-*-elf*) fmt=elf ;;
279 sh-*-coff*) fmt=coff ;;
280
281 ns32k-pc532-mach* | ns32k-pc532-ux*) fmt=aout em=pc532mach ;;
282 ns32k-pc532-netbsd* | ns32k-pc532-lites*) fmt=aout em=nbsd532 ;;
283
284 sparc-*-rtems*) fmt=aout ;;
285 sparc-*-sunos4*) fmt=aout em=sun3 ;;
286 sparc-*-aout | sparc*-*-vxworks*)
287 fmt=aout em=sparcaout ;;
288 sparc-*-coff) fmt=coff ;;
289 sparc-*-lynxos*) fmt=coff em=lynx ;;
290 sparc-fujitsu-none) fmt=aout ;;
291 sparc-*-elf | sparc-*-sysv4* | sparc-*-solaris*)
292 fmt=elf ;;
293 sparc-*-netbsd*) fmt=aout em=nbsd bfd_gas=yes ;;
294
295 # start-sanitize-tic80
296 tic80-*-*) fmt=coff targ=tic80coff;;
297 # end-sanitize-tic80
298 v850-*-*) fmt=elf bfd_gas=yes ;;
299
300 vax-*-bsd* | vax-*-ultrix*)
301 fmt=aout ;;
302 vax-*-vms) fmt=vms ;;
303
304 z8k-*-coff | z8k-*-sim)
305 fmt=coff ;;
306
307 w65-*-*) fmt=coff ;;
308
309 *-*-aout | *-*-scout)
310 fmt=aout ;;
311 *-*-nindy*)
312 fmt=bout ;;
313 *-*-bsd*)
314 fmt=aout em=sun3 ;;
315 *-*-generic) fmt=generic ;;
316 *-*-xray | *-*-hms) fmt=coff ;;
317 *-*-sim) fmt=coff ;;
318 *-*-elf | *-*-sysv4* | *-*-solaris*)
319 AC_MSG_WARN(GAS support for ${generic_target} is incomplete.)
320 fmt=elf dev=yes ;;
321 *-*-vxworks) fmt=aout ;;
322 *-*-netware) fmt=elf ;;
323 esac
324
325 case ${cpu_type}-${fmt} in
326 alpha-*) bfd_gas=yes ;;
327 arm-*) bfd_gas=yes ;;
328 # not yet
329 # i386-aout) bfd_gas=preferred ;;
330 mips-*) bfd_gas=yes ;;
331 ns32k-*) bfd_gas=yes ;;
332 ppc-*) bfd_gas=yes ;;
333 sparc-*) bfd_gas=yes ;;
334 *-elf) bfd_gas=yes ;;
335 *-ecoff) bfd_gas=yes ;;
336 *-som) bfd_gas=yes ;;
337 *) ;;
338 esac
339
340 # Other random stuff.
341
342 # do we need the opcodes library?
343 case ${cpu_type} in
344 vax | i386)
345 ;;
346 *)
347 need_opcodes=yes
348 if test "${shared_opcodes}" = "true"; then
349 # A shared libopcodes must be linked against libbfd.
350 need_bfd=yes
351 fi
352 ;;
353 esac
354
355 test -n "$want_sparc_v9" && AC_DEFINE(SPARC_V9)
356
357 case ${cpu}-${vendor}-${os} in
358 sparc64-*-elf*) AC_DEFINE(SPARC_ARCH64) ;;
359 esac
360
361 case ${cpu_type} in
362 m68k)
363 case ${extra_objects} in
364 *m68k-parse.o*) ;;
365 *) extra_objects="$extra_objects m68k-parse.o" ;;
366 esac
367 ;;
368
369 mips)
370 `echo ${extra_objects}` | grep -s "itbl-parse.o"
371 if test $? -ne 0 ; then
372 extra_objects="$extra_objects itbl-parse.o"
373 fi
374
375 `echo ${extra_objects}` | grep -s "itbl-lex.o"
376 if test $? -ne 0 ; then
377 extra_objects="$extra_objects itbl-lex.o"
378 fi
379
380 `echo ${extra_objects}` | grep -s "itbl-ops.o"
381 if test $? -ne 0 ; then
382 extra_objects="$extra_objects itbl-ops.o"
383 fi
384 ;;
385
386 *)
387 ;;
388 esac
389
390 # See if we really can support this configuration with the emulation code.
391
392 if test $this_target = $target ; then
393 primary_bfd_gas=$bfd_gas
394 obj_format=$fmt
395 gas_target=$targ
396 te_file=$em
397
398 if test $bfd_gas = no ; then
399 # Can't support other configurations this way.
400 break
401 fi
402 elif test $bfd_gas = no ; then
403 # Can't support this configuration.
404 break
405 fi
406
407 # From target name and format, produce a list of supported emulations.
408
409 case ${generic_target}-${fmt} in
410 mips-*-irix5*-*) emulation="mipsbelf mipslelf mipself mipsbecoff mipslecoff mipsecoff" ;;
411 mips-*-*-ecoff) case "$endian" in
412 big) emulation="mipsbecoff mipslecoff mipsecoff" ;;
413 *) emulation="mipslecoff mipsbecoff mipsecoff" ;;
414 esac ;;
415 mips-*-*-elf) case "$endian" in
416 big) emulation="mipsbelf mipslelf mipself" ;;
417 *) emulation="mipslelf mipsbelf mipself" ;;
418 esac ;;
419 esac
420
421 emulations="$emulations $emulation"
422
423 done
424
425 # Assign floating point type. Most processors with FP support
426 # IEEE FP. On those that don't support FP at all, usually IEEE
427 # is emulated.
428 case ${target_cpu} in
429 vax | tahoe ) atof=${target_cpu} ;;
430 *) atof=ieee ;;
431 esac
432
433 case "${obj_format}" in
434 "") AC_MSG_ERROR(GAS does not know what format to use for target ${target}) ;;
435 esac
436
437 dnl
438 dnl Make sure the desired support files exist.
439 dnl
440
441 if test ! -r ${srcdir}/config/tc-${target_cpu_type}.c; then
442 AC_MSG_ERROR(GAS does not support target CPU ${target_cpu_type})
443 fi
444
445 if test ! -r ${srcdir}/config/obj-${obj_format}.c; then
446 AC_MSG_ERROR(GAS does not have support for object file format ${obj_format})
447 fi
448
449 # and target makefile frag
450
451 target_frag=${srcdir}/config/${gas_target}.mt
452 if test ! -r ${target_frag}; then
453 target_frag=/dev/null # ick! but subst_file can't be conditionalized
454 fi
455 AC_SUBST_FILE(target_frag)
456
457 case ${user_bfd_gas}-${primary_bfd_gas} in
458 yes-yes | no-no)
459 # We didn't override user's choice.
460 ;;
461 no-yes)
462 AC_MSG_WARN(Use of BFD is required for ${target}; overriding config options.)
463 ;;
464 no-preferred)
465 primary_bfd_gas=no
466 ;;
467 *-preferred)
468 primary_bfd_gas=yes
469 ;;
470 yes-*)
471 primary_bfd_gas=yes
472 ;;
473 -*)
474 # User specified nothing.
475 ;;
476 esac
477
478 # Some COFF configurations want these random other flags set.
479 case ${obj_format} in
480 coff)
481 case ${target_cpu_type} in
482 i386) AC_DEFINE(I386COFF) ;;
483 m68k) AC_DEFINE(M68KCOFF) ;;
484 m88k) AC_DEFINE(M88KCOFF) ;;
485 esac
486 ;;
487 esac
488
489 # Getting this done right is going to be a bitch. Each configuration specified
490 # with --enable-targets=... should be checked for environment, format, cpu, and
491 # bfd_gas setting.
492 #
493 # For each configuration, the necessary object file support code must be linked
494 # in. This might be only one, it might be up to four. The necessary emulation
495 # code needs to be provided, too.
496 #
497 # And then there's "--enable-targets=all"....
498 #
499 # For now, just always do it for MIPS ELF or ECOFF configurations. Sigh.
500
501 formats="${obj_format}"
502 emfiles=""
503 EMULATIONS=""
504 GAS_UNIQ(emulations)
505 for em in . $emulations ; do
506 case $em in
507 .) continue ;;
508 mipsbelf | mipslelf)
509 fmt=elf file=mipself ;;
510 mipsbecoff | mipslecoff)
511 fmt=ecoff file=mipsecoff ;;
512 esac
513 formats="$formats $fmt"
514 emfiles="$emfiles e-$file.o"
515 EMULATIONS="$EMULATIONS &$em,"
516 done
517 GAS_UNIQ(formats)
518 GAS_UNIQ(emfiles)
519 if test `set . $formats ; shift ; echo $#` -gt 1 ; then
520 for fmt in $formats ; do
521 case $fmt in
522 aout) AC_DEFINE(OBJ_MAYBE_AOUT) ;;
523 bout) AC_DEFINE(OBJ_MAYBE_BOUT) ;;
524 coff) AC_DEFINE(OBJ_MAYBE_COFF) ;;
525 ecoff) AC_DEFINE(OBJ_MAYBE_ECOFF) ;;
526 elf) AC_DEFINE(OBJ_MAYBE_ELF) ;;
527 generic) AC_DEFINE(OBJ_MAYBE_GENERIC) ;;
528 hp300) AC_DEFINE(OBJ_MAYBE_HP300) ;;
529 ieee) AC_DEFINE(OBJ_MAYBE_IEEE) ;;
530 som) AC_DEFINE(OBJ_MAYBE_SOM) ;;
531 vms) AC_DEFINE(OBJ_MAYBE_VMS) ;;
532 esac
533 extra_objects="$extra_objects obj-$fmt.o"
534 done
535 obj_format=multi
536 fi
537 if test `set . $emfiles ; shift ; echo $#` -gt 0 ; then
538 te_file=multi
539 extra_objects="$extra_objects $emfiles"
540 DEFAULT_EMULATION=`set . $emulations ; echo $2`
541 AC_DEFINE(USE_EMULATIONS)
542 fi
543 AC_SUBST(extra_objects)
544 AC_DEFINE_UNQUOTED(EMULATIONS, $EMULATIONS)
545 AC_DEFINE_UNQUOTED(DEFAULT_EMULATION, "$DEFAULT_EMULATION")
546
547 files="config/tc-${target_cpu_type}.c config/tc-${target_cpu_type}.h \
548 config/obj-${obj_format}.h config/obj-${obj_format}.c \
549 config/te-${te_file}.h config/atof-${atof}.c \
550 config/itbl-${target_cpu_type}.h \
551 $extra_files"
552 links="targ-cpu.c targ-cpu.h obj-format.h obj-format.c targ-env.h atof-targ.c \
553 itbl-cpu.h \
554 $extra_links"
555
556 case ${primary_bfd_gas}-${target_cpu_type}-${obj_format} in
557 yes-*-coff) need_bfd=yes ;;
558 no-*-coff) need_bfd=yes
559 AC_DEFINE(MANY_SEGMENTS) ;;
560 esac
561
562 reject_dev_configs=yes
563
564 case ${reject_dev_configs}-${dev} in
565 yes-yes) # Oops.
566 AC_MSG_ERROR(GAS does not support the ${generic_target} configuration.)
567 ;;
568 esac
569
570 AC_SUBST(target_cpu_type)
571 AC_SUBST(obj_format)
572 AC_SUBST(atof)
573 dnl AC_SUBST(emulation)
574
575 AC_LINK_FILES($files, $links)
576
577 case "${primary_bfd_gas}" in
578 yes) AC_DEFINE(BFD_ASSEMBLER)
579 need_bfd=yes ;;
580 esac
581
582 # do we need the opcodes library?
583 case "${need_opcodes}" in
584 yes)
585 OPCODES_DEP=../opcodes/libopcodes.a
586 OPCODES_LIB='-L../opcodes -lopcodes'
587
588 # We need to handle some special cases for shared libraries.
589 case "${host}" in
590 *-*-sunos*)
591 # On SunOS, we must link against the name we are going to install,
592 # not -lbfd, since SunOS does not support SONAME.
593 if test "${shared_opcodes}" = "true"; then
594 OPCODES_LIB='-L../opcodes -l`echo opcodes | sed '"'"'$(program_transform_name)'"'"'`'
595 fi
596 ;;
597 alpha*-*-osf*)
598 # On Alpha OSF/1, the native linker searches all the -L
599 # directories for any LIB.so files, and only then searches for any
600 # LIB.a files. That means that if there is an installed
601 # libbfd.so, but this build is not done with --enable-shared, the
602 # link will wind up being against the install libbfd.so rather
603 # than the newly built libbfd. To avoid this, we must explicitly
604 # link against libbfd.a when --enable-shared is not used.
605 if test "${shared_opcodes}" != "true"; then
606 OPCODES_LIB='../opcodes/libopcodes.a'
607 fi
608 ;;
609 esac
610 ;;
611 esac
612 AC_SUBST(OPCODES_DEP)
613 AC_SUBST(OPCODES_LIB)
614
615 case "${need_bfd}" in
616 yes)
617 BFDDEP=../bfd/libbfd.a
618 BFDLIB='-L../bfd -lbfd'
619 ALL_OBJ_DEPS="$ALL_OBJ_DEPS ../bfd/bfd.h"
620
621 # We need to handle some special cases for shared libraries
622 case "${host}" in
623 *-*-sunos*)
624 # On SunOS, we must link against the name we are going to install,
625 # not -lbfd, since SunOS does not support SONAME.
626 if test "${shared_bfd}" = "true"; then
627 BFDLIB='-L../bfd -l`echo bfd | sed '"'"'$(program_transform_name)'"'"'`'
628 fi
629 ;;
630 alpha*-*-osf*)
631 # On Alpha OSF/1, the native linker searches all the -L
632 # directories for any LIB.so files, and only then searches for any
633 # LIB.a files. That means that if there is an installed
634 # libbfd.so, but this build is not done with --enable-shared, the
635 # link will wind up being against the install libbfd.so rather
636 # than the newly built libbfd. To avoid this, we must explicitly
637 # link against libbfd.a when --enable-shared is not used.
638 if test "${shared_bfd}" != "true"; then
639 BFDLIB='../bfd/libbfd.a'
640 fi
641 ;;
642 esac
643 ;;
644 esac
645 AC_SUBST(BFDDEP)
646 AC_SUBST(BFDLIB)
647 AC_SUBST(ALL_OBJ_DEPS)
648
649 AC_DEFINE_UNQUOTED(TARGET_ALIAS, "${target_alias}")
650 AC_DEFINE_UNQUOTED(TARGET_CANONICAL, "${target}")
651 AC_DEFINE_UNQUOTED(TARGET_CPU, "${target_cpu}")
652 AC_DEFINE_UNQUOTED(TARGET_VENDOR, "${target_vendor}")
653 AC_DEFINE_UNQUOTED(TARGET_OS, "${target_os}")
654
655 AC_PROG_CC
656 AC_PROG_INSTALL
657
658 AC_CHECK_HEADERS(string.h stdlib.h memory.h strings.h unistd.h stdarg.h varargs.h errno.h sys/types.h)
659
660 # Put this here so that autoconf's "cross-compiling" message doesn't confuse
661 # people who are not cross-compiling but are compiling cross-assemblers.
662 AC_MSG_CHECKING(whether compiling a cross-assembler)
663 if test "${host}" = "${target}"; then
664 cross_gas=no
665 else
666 cross_gas=yes
667 AC_DEFINE(CROSS_COMPILE)
668 fi
669 AC_MSG_RESULT($cross_gas)
670
671 dnl ansidecl.h will deal with const
672 dnl AC_CONST
673 AC_FUNC_ALLOCA
674 AC_C_INLINE
675
676 # VMS doesn't have unlink.
677 AC_CHECK_FUNCS(unlink remove, break)
678
679 # Some systems don't have sbrk().
680 AC_CHECK_FUNCS(sbrk)
681
682 # Some non-ANSI preprocessors botch requoting inside strings. That's bad
683 # enough, but on some of those systems, the assert macro relies on requoting
684 # working properly!
685 GAS_WORKING_ASSERT
686
687 # On some systems, the system header files may not declare malloc, realloc,
688 # and free. There are places where gas needs these functions to have been
689 # declared -- such as when taking their addresses.
690 gas_test_headers="
691 #ifdef HAVE_MEMORY_H
692 #include <memory.h>
693 #endif
694 #ifdef HAVE_STRING_H
695 #include <string.h>
696 #else
697 #ifdef HAVE_STRINGS_H
698 #include <strings.h>
699 #endif
700 #endif
701 #ifdef HAVE_STDLIB_H
702 #include <stdlib.h>
703 #endif
704 #ifdef HAVE_UNISTD_H
705 #include <unistd.h>
706 #endif
707 "
708 GAS_CHECK_DECL_NEEDED(strstr, f, char *(*f)(), $gas_test_headers)
709 GAS_CHECK_DECL_NEEDED(malloc, f, char *(*f)(), $gas_test_headers)
710 GAS_CHECK_DECL_NEEDED(free, f, void (*f)(), $gas_test_headers)
711 GAS_CHECK_DECL_NEEDED(sbrk, f, char *(*f)(), $gas_test_headers)
712
713 # Does errno.h declare errno, or do we have to add a separate declaration
714 # for it?
715 GAS_CHECK_DECL_NEEDED(errno, f, int f, [
716 #ifdef HAVE_ERRNO_H
717 #include <errno.h>
718 #endif
719 ])
720
721 HLDFLAGS=
722 HLDENV=
723 RPATH_ENVVAR=LD_LIBRARY_PATH
724 # If we have shared libraries, try to set rpath reasonably.
725 if test "${shared}" = "true"; then
726 case "${host}" in
727 *-*-hpux*)
728 HLDFLAGS='-Wl,+s,+b,$(libdir)'
729 RPATH_ENVVAR=SHLIB_PATH
730 ;;
731 *-*-irix5* | *-*-irix6*)
732 HLDFLAGS='-Wl,-rpath,$(libdir)'
733 ;;
734 *-*-linux*aout*)
735 ;;
736 *-*-linux*)
737 HLDFLAGS='-Wl,-rpath,$(libdir)'
738 ;;
739 *-*-solaris*)
740 HLDFLAGS='-R $(libdir)'
741 ;;
742 *-*-sysv4*)
743 HLDENV='if test -z "$${LD_RUN_PATH}"; then LD_RUN_PATH=$(libdir); else LD_RUN_PATH=$${LD_RUN_PATH}:$(libdir); fi; export LD_RUN_PATH;'
744 ;;
745 esac
746 fi
747
748 # On SunOS, if the linker supports the -rpath option, use it to
749 # prevent ../bfd and ../opcodes from being included in the run time
750 # search path.
751 case "${host}" in
752 *-*-sunos*)
753 echo 'main () { }' > conftest.c
754 ${CC} -o conftest -Wl,-rpath= conftest.c >/dev/null 2>conftest.t
755 if grep 'unrecognized' conftest.t >/dev/null 2>&1; then
756 :
757 elif grep 'No such file' conftest.t >/dev/null 2>&1; then
758 :
759 elif grep 'do not mix' conftest.t >/dev/null 2>&1; then
760 :
761 elif test "${shared}" = "true"; then
762 HLDFLAGS='-Wl,-rpath=$(libdir)'
763 else
764 HLDFLAGS='-Wl,-rpath='
765 fi
766 rm -f conftest.t conftest.c conftest
767 ;;
768 esac
769 AC_SUBST(HLDFLAGS)
770 AC_SUBST(HLDENV)
771 AC_SUBST(RPATH_ENVVAR)
772
773 dnl This must come last.
774 AC_OUTPUT(Makefile doc/Makefile .gdbinit:gdbinit.in)
This page took 0.044907 seconds and 4 git commands to generate.