gas/configure.in

   1 # This file is configure.in
   2 #
   3 #   Copyright (C) 1987-1992,1993,1994 Free Software Foundation, Inc.
   4 #
   5 #  This file is part of GAS, the GNU Assembler.
   6 #
   7 #   GAS is free software; you can redistribute it and/or modify
   8 #   it under the terms of the GNU General Public License as published by
   9 #   the Free Software Foundation; either version 2, or (at your option)
  10 #   any later version.
  11 #
  12 #   GAS is distributed in the hope that it will be useful,
  13 #   but WITHOUT ANY WARRANTY; without even the implied warranty of
  14 #   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15 #   GNU General Public License for more details.
  16 #
  17 #   You should have received a copy of the GNU General Public License
  18 #   along with GAS; see the file COPYING.  If not, write to
  19 #   the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
  20 #
  21
  22 # This file was written, and is maintained by K. Richard Pixley
  23 # <rich@cygnus.com>.
  24
  25 # This file is a shell script that supplies the information necessary
  26 # to tailor a template configure script into the configure script
  27 # appropriate for this directory.  For more information, check any
  28 # existing configure script.
  29
  30 srctrigger=as.c
  31 srcname="gas"
  32 need_bfd=no
  33 bfd_gas=no
  34 configdirs="doc testsuite"
  35
  36 # per-host:
  37
  38 gas_host=generic
  39
  40 case "${host}" in
  41   a29k-*-*)                     gas_host=a29k           ;;
  42
  43   alpha-*-osf*)                 gas_host=ansi           ;;
  44
  45   hppa*-hp-hpux*)               gas_host=hpux           ;;
  46   hppa*-hp-bsd*)                gas_host=hppabsd        ;;
  47   hppa*-hp-osf*)                gas_host=hppaosf        ;;
  48
  49   i[34]86-ibm-aix*)             gas_host=i386aix        ;;
  50   i[34]86-*-isc*)               gas_host=sysv           ;;
  51   i386-sun-sunos*)              gas_host=sun386         ;;
  52
  53   m68k-sun-sunos*)              gas_host=sun3           ;;
  54   m68*-*-hpux)                  gas_host=hpux           ;;
  55
  56   mips*-dec-ultrix*)            gas_host=decstatn       ;;
  57   mips*-*-bsd*)                 gas_host=mipsbsd        ;;
  58   mips*-sgi-irix*)              gas_host=irix           ;;
  59
  60   rs6000-*-*)                   gas_host=rs6000         ;;
  61
  62   sparc-sun-sunos*)             gas_host=sun4           ;;
  63   sparc-sun-solaris2*)          gas_host=sysv           ;;
  64
  65   vax-*-vms*)                   gas_host=vms            ;;
  66   vax-*-bsd*)                   gas_host=vax            ;;
  67   vax-*-ultrix*)                gas_host=vax            ;;
  68
  69   *-*-sysv4* | *-*-unixware)    gas_host=sysv           ;;
  70
  71   *-*-ansi | *-*-hpux | *-*-sysv)
  72                                 gas_host=${host_os}     ;;
  73
  74 esac
  75
  76 if [ ! -r ${srcdir}/config/ho-${gas_host}.h ]; then
  77   echo '*** GAS does not support host' ${host} 1>&2
  78   exit 1
  79 fi
  80
  81 # per-target:
  82
  83 case ${with_bfd_assembler} in
  84   yes)
  85     echo "*** Warning:  GAS BFD configuration option not yet fully supported" 1>&2
  86     need_bfd=yes
  87     bfd_gas=yes
  88     ;;
  89   no | "")
  90     ;;
  91   *)
  92     echo "*** Bad value \"${with_bfd_assembler}\" for --with-bfd-assembler option" 1>&2
  93     exit 1
  94     ;;
  95 esac
  96
  97 # assign cpu type
  98 emulation=generic
  99
 100 # default is big
 101 endian=big
 102
 103 # check for architecture variants
 104 case ${target_cpu} in
 105   # Actually we've only got support for the 1.1, so we shouldn't generalize,
 106   # but this is what the support files are named...
 107   hppa*)        cpu_type=hppa ;;
 108   i486)         cpu_type=i386 ;;
 109   m680[01234]0) cpu_type=m68k ;;
 110   m68008)       cpu_type=m68k ;;
 111   m683??)       cpu_type=m68k ;;
 112   m8*)          cpu_type=m88k ;;
 113   mips*el)      cpu_type=mips endian=little;;
 114   mips*)        cpu_type=mips ;;
 115   rs6000*)      cpu_type=ppc ;;
 116   sparc64)      cpu_type=sparc64 obj_format=elf ;; # v9
 117   sparclite*)   cpu_type=sparc ;;
 118   *)            cpu_type=${target_cpu} ;;
 119 esac
 120
 121 gas_target=${cpu_type}
 122 generic_target=${cpu_type}-${target_vendor}-${target_os}
 123 dev=no
 124
 125 # assign object format
 126 case ${generic_target} in
 127   a29k-amd-udi)         obj_format=coffbfd gas_target=ebmon29k ;;
 128   a29k-amd-ebmon)       obj_format=coffbfd gas_target=ebmon29k ;;
 129   a29k-amd-ebmonold)    obj_format=coff gas_target=ebmon29k ;;
 130
 131   alpha-*-osf*)         obj_format=ecoff dev=yes ;;
 132
 133   hppa-*-osf)           obj_format=elf emulation=hppa ;;
 134   hppa-*-hpux*)         obj_format=som emulation=hppa ;;
 135   hppa-*-bsd*)          obj_format=som emulation=hppa ;;
 136
 137   h8300-*-coff)         obj_format=coffbfd ;;
 138
 139   i386-ibm-aix*)        obj_format=coffbfd gas_target=i386coff
 140                          emulation=i386aix ;;
 141   i386-*-bsd*)          obj_format=aout emulation=386bsd ;;
 142   i386-*-netbsd0.8)     obj_format=aout emulation=netbsd ;;
 143   i386-*-netbsd*)       obj_format=aout emulation=netbsd ;;
 144   i386-*-linux*elf*)    obj_format=elf  emulation=linux ;;
 145   i386-*-linux*coff*)   obj_format=coffbfd emulation=linux
 146                          gas_target=i386coff ;;
 147   i386-*-linux*)        obj_format=aout emulation=linux ;;
 148   i386-*-lynxos*)       obj_format=coffbfd gas_target=i386coff
 149                          emulation=lynx ;;
 150   i386-*-sysv4* | i386-*-solaris* | i386-*-elf)
 151                         obj_format=elf ;;
 152   i386-*-coff | i386-*-sysv* | i386-*-sco* | i386-*-isc*)
 153                         obj_format=coffbfd gas_target=i386coff ;;
 154   i386-*-vsta)          obj_format=aout ;;
 155   i386-*-go32)          obj_format=aout ;;
 156
 157   i960-wrs-vxworks | i960-*-nindy*)
 158                         obj_format=bout ;;
 159   i960-*-coff)          obj_format=coff emulation=ic960 ;;
 160
 161   m68k-wrs-vxworks | m68k-ericsson-ose | m68k-*-sunos*)
 162                         obj_format=aout emulation=sun3 ;;
 163   m68k-*-coff | m68k-*-sysv*)
 164                         obj_format=coffbfd gas_target=m68kcoff ;;
 165   m68k-*-hpux)          obj_format=hp300 emulation=hp300 ;;
 166   m68k-*-lynxos*)       obj_format=coffbfd gas_target=m68kcoff
 167                          emulation=lynx ;;
 168
 169   m88k-*-coff*)         obj_format=coffbfd gas_target=m88kcoff ;;
 170
 171   # don't change emulation like *-*-bsd does
 172   mips-*-bsd*)          bfd_gas=yes obj_format=aout gas_target=mips-lit ;;
 173   mips-*-ultrix*)       obj_format=ecoff gas_target=mips-lit ;;
 174   mips-*-ecoff*)        obj_format=ecoff
 175                         if [ $endian = big ] ; then
 176                           gas_target=mips-big
 177                         else
 178                           gas_target=mips-lit
 179                         fi
 180                         ;;
 181   mips-*-ecoff*)        obj_format=ecoff gas_target=mips-big ;;
 182   mips-*-irix5*)        obj_format=elf gas_target=mips-big ;;
 183   mips-*-irix*)         obj_format=ecoff gas_target=mips-big emulation=irix ;;
 184   mips-*-riscos*)       obj_format=ecoff gas_target=mips-big ;;
 185   mips-*-sysv*)         obj_format=ecoff gas_target=mips-big ;;
 186   mips-*-elf*)          obj_format=elf
 187                         if [ $endian = big ] ; then
 188                           gas_target=mips-big
 189                         else
 190                           gas_target=mips-lit
 191                         fi
 192                         ;;
 193
 194   ppc-*-aix*)           obj_format=coff bfd_gas=yes ;;
 195
 196   sh-*-coff)            obj_format=coffbfd ;;
 197
 198   sparc*-*-sunos4*)     obj_format=aout emulation=sun3 bfd_gas=yes ;;
 199   sparc*-*-aout | sparc*-*-vxworks)
 200                         obj_format=aout bfd_gas=yes ;;
 201   sparc*-*-coff)        obj_format=coff bfd_gas=yes ;;
 202   sparc*-*-lynxos)      obj_format=coff bfd_gas=yes ;;
 203   sparc*-fujitsu-none)  obj_format=aout bfd_gas=yes ;;
 204   sparc*-*-elf | sparc*-*-solaris*)
 205                         obj_format=elf ;;
 206   sparc64-*-aout*)      obj_format=aout bfd_gas=yes ;; # v9
 207
 208   vax-*-bsd* | vax-*-ultrix*)
 209                         obj_format=aout ;;
 210   vax-*-vms)            obj_format=vms ;;
 211
 212   z8k-*-coff | z8k-*-sim)
 213                         obj_format=coffbfd ;;
 214
 215   *-*-aout | *-*-scout)
 216                         obj_format=aout ;;
 217   *-*-nindy*)
 218                         obj_format=bout ;;
 219   *-*-bsd*)
 220                         obj_format=aout emulation=sun3 ;;
 221   *-*-generic)          obj_format=generic ;;
 222   *-*-xray | *-*-hms)   obj_format=coffbfd ;;
 223   *-*-sysv32)           obj_format=coff emulation=sysv32 ;;
 224   *-*-sim)              obj_format=coffbfd ;;
 225   *-*-elf | *-*-sysv4* | *-*-solaris*)
 226         echo '*** Warning: GAS support for ELF format is incomplete' 1>&2
 227                         obj_format=elf dev=yes ;;
 228   *-*-coff* | *-sysv* | *-*-sco*)
 229                         obj_format=coff
 230                         case ${target_vendor} in
 231                           bull)  emulation=dpx2 ;;
 232                           sun)   emulation=sun3 ;;
 233                         esac
 234                         ;;
 235   *-*-vxworks)          obj_format=aout ;;
 236   *-*-netware)          obj_format=elf ;;
 237 esac
 238
 239 # Assign floating point type.  Most processors with FP support
 240 # IEEE FP.  On those that don't support FP at all, usually IEEE
 241 # is emulated.
 242 case ${target_cpu} in
 243   ns32k | vax | tahoe ) atof=${target_cpu} ;;
 244   *)                    atof=ieee ;;
 245 esac
 246
 247 if [ ! -r ${srcdir}/config/tc-${cpu_type}.c ]; then
 248   echo '*** GAS does not support target CPU' ${cpu_type}                1>&2
 249   exit 1
 250 fi
 251
 252 case "${obj_format}" in
 253   "")
 254       echo "*** GAS doesn't know what format to use for target" ${target} 1>&2
 255       exit 1
 256       ;;
 257 esac
 258
 259 if [ ! -r ${srcdir}/config/obj-${obj_format}.c ]; then
 260   echo '*** GAS does not have support for object file format' ${obj_format} 1>&2
 261   exit 1
 262 fi
 263
 264 # and target makefile frag
 265
 266 target_makefile_frag=config/${gas_target}.mt
 267
 268 case ${bfd_gas}-${obj_format} in
 269   yes-coffbfd)  obj_format=coff ;;
 270   no-coffbfd)   need_bfd=yes ;;
 271   *-elf)        bfd_gas=yes ;;
 272   *-ecoff)      bfd_gas=yes ;;
 273   *-som)        bfd_gas=yes ;;
 274   *)            ;;
 275 esac
 276
 277 case ${with_bfd_assembler}-${bfd_gas} in
 278   yes-yes | no-no)
 279     # We didn't override user's choice.
 280     ;;
 281   no-yes)
 282     echo '*** Use of BFD is required for ${target}; overriding config options'\
 283                 1>&2
 284     ;;
 285   no-preferred)
 286     bfd_gas=no
 287     ;;
 288   *-preferred)
 289     bfd_gas=yes
 290     ;;
 291   -*)
 292     # User specified nothing.
 293     ;;
 294 esac
 295
 296 reject_dev_configs=yes
 297
 298 case ${reject_dev_configs}-${dev} in
 299   yes-yes) # Oops.
 300     echo "*** GAS does not support the ${generic_target} configuration" 1>&2
 301     exit 1
 302     ;;
 303 esac
 304
 305 files="config/ho-${gas_host}.h config/tc-${cpu_type}.c \
 306         config/tc-${cpu_type}.h config/te-${emulation}.h \
 307         config/obj-${obj_format}.h config/obj-${obj_format}.c \
 308         config/atof-${atof}.c"
 309
 310 links="host.h targ-cpu.c targ-cpu.h targ-env.h obj-format.h obj-format.c atof-targ.c"
 311
 312 # post-target:
 313
 314 case ${bfd_gas} in
 315   yes)  bfddef="BFDDEF=define" need_bfd=yes             ;;
 316   *)    bfddef="BFDDEF=undef"                           ;;
 317 esac
 318
 319 case ${need_bfd} in
 320   yes)  bfdlib="BFDLIB=../bfd/libbfd.a"                 ;;
 321   *)    bfdlib=""                                       ;;
 322 esac
 323
 324 case "x${host}" in
 325   "x${target}") cross=""                                ;;
 326   *)            cross="CROSS=-DCROSS_COMPILE"           ;;
 327 esac
 328
 329 rm -f Makefile.tem
 330 echo $bfddef >  Makefile.tem
 331 echo $bfdlib >> Makefile.tem
 332 echo $cross  >> Makefile.tem
 333 cat Makefile >> Makefile.tem
 334 mv -f Makefile.tem Makefile
 335
 336 # end of gas/configure.in