* listing.c (listing_print): Close the listing file if it is not
[deliverable/binutils-gdb.git] / gas / configure.in
1 dnl Process this file with autoconf to produce a configure script.
2 dnl
3 dnl And be careful when changing it! If you must add tests with square
4 dnl brackets, be sure changequote invocations surround it.
5 dnl
6 dnl
7 AC_PREREQ(2.5)dnl v2.5 needed for --bindir et al
8 AC_INIT(as.h)dnl
9 dnl
10 user_bfd_gas=
11 AC_ARG_ENABLE(bfd-assembler,
12 [ --enable-bfd-assembler use BFD back end for writing object files],
13 [case "${enableval}" in
14 yes) need_bfd=yes user_bfd_gas=yes ;;
15 no) user_bfd_gas=no ;;
16 *) AC_MSG_ERROR(bad value ${enableval} given for bfd-assembler option) ;;
17 esac])dnl
18 AC_ARG_ENABLE(targets,
19 [ targets alternative target configurations besides the primary],
20 [case "${enableval}" in
21 yes | "") AC_ERROR(enable-targets option must specify target names or 'all')
22 ;;
23 no) enable_targets= ;;
24 *) enable_targets=$enableval ;;
25 esac])dnl
26 AC_ARG_ENABLE(shared,
27 [ --enable-shared build shared BFD library],
28 [case "${enableval}" in
29 yes) shared=true shared_bfd=true shared_opcodes=true ;;
30 no) shared=false ;;
31 *bfd*opcodes*) shared=true shared_bfd=true shared_opcodes=true ;;
32 *opcodes*bfd*) shared=true shared_bfd=true shared_opcodes=true ;;
33 *bfd*) shared=true shared_bfd=true ;;
34 *opcodes*) shared=true shared_opcodes=true ;;
35 *) shared=false ;;
36 esac])dnl
37
38 # Generate a header file -- gets more post-processing by Makefile later.
39 AC_CONFIG_HEADER(conf)
40
41 dnl For recursion to work right, this must be an absolute pathname.
42 AC_CONFIG_AUX_DIR(`cd $srcdir;pwd`/..)
43 AC_CANONICAL_SYSTEM
44 AC_ARG_PROGRAM
45
46 te_file=generic
47
48 canon_targets=""
49 if test -n "$enable_targets" ; then
50 for t in `echo $enable_targets | sed 's/,/ /g'`; do
51 result=`$ac_config_sub $t 2>/dev/null`
52 if test -n "$result" ; then
53 canon_targets="$canon_targets $result"
54 # else
55 # # Permit "all", etc. We don't support it yet though.
56 # canon_targets="$canon_targets $t"
57 fi
58 done
59 GAS_UNIQ(canon_targets)
60 fi
61
62 emulations=""
63
64 for this_target in $target $canon_targets ; do
65
66 eval `echo $this_target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/cpu=\1 vendor=\2 os=\3/'`
67
68 # check for architecture variants
69 case ${cpu} in
70 armeb) cpu_type=arm endian=big ;;
71 arm*) cpu_type=arm endian=little ;;
72 hppa*) cpu_type=hppa ;;
73 changequote(,)dnl
74 i[456]86) cpu_type=i386 ;;
75 m680[012346]0) cpu_type=m68k ;;
76 m68008) cpu_type=m68k ;;
77 m683??) cpu_type=m68k ;;
78 changequote([,])dnl
79 m8*) cpu_type=m88k ;;
80 mips*el) cpu_type=mips endian=little;;
81 mips*) cpu_type=mips endian=big ;;
82 powerpcle*) cpu_type=ppc endian=little ;;
83 powerpc*) cpu_type=ppc endian=big ;;
84 rs6000*) cpu_type=ppc ;;
85 sparc64) cpu_type=sparc want_sparc_v9=true ;;
86 sparc*) cpu_type=sparc ;;
87 *) cpu_type=${cpu} ;;
88 esac
89
90 if test ${this_target} = $target ; then
91 target_cpu_type=${cpu_type}
92 elif test ${target_cpu_type} != ${cpu_type} ; then
93 continue
94 fi
95
96 targ=${cpu_type}
97 generic_target=${cpu_type}-$vendor-$os
98 dev=no
99 bfd_gas=no
100 em=generic
101
102 # assign object format
103 case ${generic_target} in
104 a29k-*-coff) fmt=coff targ=ebmon29k ;;
105 a29k-amd-udi) fmt=coff targ=ebmon29k ;;
106 a29k-amd-ebmon) fmt=coff targ=ebmon29k ;;
107 a29k-nyu-sym1) fmt=coff targ=ebmon29k ;;
108 a29k-*-vxworks*) fmt=coff ;;
109
110 alpha-*-netware*) fmt=ecoff ;;
111 alpha-*-osf*) fmt=ecoff ;;
112 alpha-*-linuxecoff*) fmt=ecoff ;;
113 alpha-*-linux*) fmt=elf em=linux ;;
114
115 # start-sanitize-arc
116 arc-*-elf*) fmt=elf bfd_gas=yes ;;
117 # end-sanitize-arc
118
119 arm-*-riscix*) fmt=aout targ=arm-lit ;;
120 arm-*-aout) fmt=aout
121 case "$endian" in
122 big) targ=arm-big ;;
123 *) targ=arm-lit ;;
124 esac
125 ;;
126 arm-*-coff) fmt=coff ;;
127 arm-*-riscix*) fmt=aout ;;
128 arm-*-pe) fmt=coff targ=armcoff em=pe ;;
129
130 hppa-*-*elf*) fmt=elf em=hppa ;;
131 hppa-*-lites*) fmt=elf em=hppa ;;
132 hppa-*-osf*) fmt=som em=hppa ;;
133 hppa-*-hpux*) fmt=som em=hppa ;;
134 hppa-*-bsd*) fmt=som em=hppa ;;
135 hppa-*-hiux*) fmt=som em=hppa ;;
136
137 h8300-*-coff) fmt=coff ;;
138
139 i386-ibm-aix*) fmt=coff targ=i386coff
140 em=i386aix ;;
141 i386-*-bsd*) fmt=aout em=386bsd ;;
142 i386-*-netbsd0.8) fmt=aout em=386bsd ;;
143 i386-*-netbsd*) fmt=aout em=nbsd bfd_gas=yes;;
144 i386-*-linux*aout* | i386-*-linuxoldld) fmt=aout em=linux ;;
145 i386-*-linux*coff*) fmt=coff em=linux
146 targ=i386coff ;;
147 i386-*-linux*) fmt=elf em=linux ;;
148 i386-*-lynxos*) fmt=coff targ=i386coff
149 em=lynx ;;
150 i386-*-sysv4* | i386-*-solaris* | i386-*-elf | i386-*-freebsdelf*)
151 fmt=elf ;;
152 i386-*-sco*elf*) fmt=elf targ=sco5 ;;
153 i386-*-coff | i386-*-sysv* | i386-*-sco* | i386-*-isc*)
154 fmt=coff targ=i386coff ;;
155 i386-*-vsta) fmt=aout ;;
156 i386-*-go32) fmt=coff targ=i386coff ;;
157 i386-*-rtems*) fmt=coff targ=i386coff ;;
158 i386-*-gnu*) fmt=elf ;;
159 i386-*-mach*)
160 fmt=aout em=mach bfd_gas=yes ;;
161 i386-*-msdos*) fmt=aout ;;
162 i386-*-moss*) fmt=elf ;;
163 i386-*-pe) fmt=coff targ=i386coff em=pe ;;
164 i386-*-cygwin32) fmt=coff targ=i386coff em=pe ;;
165 i386-*-*nt) fmt=coff targ=i386coff em=pe ;;
166 i960-*-bout) fmt=bout ;;
167 i960-*-coff) fmt=coff em=ic960 targ=ic960coff ;;
168 i960-*-rtems*) fmt=coff em=ic960 targ=ic960coff ;;
169 i960-*-nindy*) fmt=bout ;;
170 i960-*-vxworks4*) fmt=bout ;;
171 i960-*-vxworks5.0) fmt=bout ;;
172 i960-*-vxworks5.*) fmt=coff em=ic960 targ=ic960coff ;;
173 i960-*-vxworks*) fmt=bout ;;
174
175 m68k-*-vxworks* | m68k-ericsson-ose | m68k-*-sunos*)
176 fmt=aout em=sun3 ;;
177 m68k-motorola-sysv*) fmt=coff targ=m68kcoff em=delta ;;
178 m68k-bull-sysv3*) fmt=coff targ=m68kcoff em=dpx2 ;;
179 m68k-apollo-*) fmt=coff targ=apollo em=apollo ;;
180 m68k-*-sysv4 | m68k-*-elf) # must be before -sysv*
181 fmt=elf ;;
182 m68k-*-coff | m68k-*-sysv* | m68k-*-rtems*)
183 fmt=coff targ=m68kcoff ;;
184 m68k-*-hpux*) fmt=hp300 em=hp300 ;;
185 m68k-*-linux*aout*) fmt=aout em=linux ;;
186 m68k-*-linux*) fmt=elf em=linux ;;
187 m68k-*-lynxos*) fmt=coff targ=m68kcoff
188 em=lynx ;;
189 m68k-*-netbsd*) fmt=aout em=nbsd bfd_gas=yes ;;
190 m68k-apple-aux*) fmt=coff targ=m68kcoff em=aux ;;
191 m68k-*-psos*) fmt=elf em=psos;;
192
193 m88k-motorola-sysv3*) fmt=coff targ=m88kcoff em=delt88 ;;
194 m88k-*-coff*) fmt=coff targ=m88kcoff ;;
195
196 # don't change em like *-*-bsd does
197 mips-dec-netbsd*) fmt=elf targ=mips-lit endian=little ;;
198 mips-dec-bsd*) fmt=aout targ=mips-lit ;;
199 mips-sony-bsd*) fmt=ecoff targ=mips-big ;;
200 mips-*-bsd*) AC_MSG_ERROR(Unknown vendor for mips-bsd configuration.) ;;
201 mips-*-ultrix*) fmt=ecoff targ=mips-lit endian=little ;;
202 mips-*-ecoff*) fmt=ecoff
203 case "$endian" in
204 big) targ=mips-big ;;
205 *) targ=mips-lit ;;
206 esac
207 ;;
208 mips-*-ecoff*) fmt=ecoff targ=mips-big ;;
209 mips-*-gnu*) fmt=aout
210 case "$endian" in
211 big) targ=mips-big ;;
212 *) targ=mips-lit ;;
213 esac
214 ;;
215 mips-*-irix5*) fmt=elf targ=mips-big ;;
216 mips-*-irix*) fmt=ecoff targ=mips-big ;;
217 mips-*-riscos*) fmt=ecoff targ=mips-big ;;
218 mips-*-sysv*) fmt=ecoff targ=mips-big ;;
219 mips-*-elf*) fmt=elf
220 case "$endian" in
221 big) targ=mips-big ;;
222 *) targ=mips-lit ;;
223 esac
224 ;;
225 ppc-*-pe | ppc-*-cygwin32 | ppc-*-winnt*)
226 fmt=coff em=pe
227 case "$endian" in
228 big) targ=ppc-big ;;
229 *) targ=ppc-lit ;;
230 esac
231 ;;
232 ppc-*-aix*) fmt=coff ;;
233 ppc-*-elf* | ppc-*-eabi* | ppc-*-sysv4*)
234 fmt=elf
235 case "$endian" in
236 big) targ=ppc-big ;;
237 *) targ=ppc-lit ;;
238 esac
239 ;;
240 ppc-*-linux*) fmt=elf
241 case "$endian" in
242 big) targ=ppc-big ;;
243 *) AC_MSG_ERROR(Linux must be configured big endian) ;;
244 esac
245 ;;
246 ppc-*-solaris*) fmt=elf
247 case "$endian" in
248 big) AC_MSG_ERROR(Solaris must be configured little endian) ;;
249 *) targ=ppc-sol ;;
250 esac
251 ;;
252 ppc-*-rtems*)
253 fmt=elf
254 case "$endian" in
255 big) targ=ppc-big ;;
256 *) targ=ppc-lit ;;
257 esac
258 ;;
259 ppc-*-macos* | ppc-*-mpw*)
260 fmt=coff em=macos ;;
261 ppc-*-netware*) fmt=elf em=ppcnw ;;
262
263 sh-*-coff) fmt=coff ;;
264
265 ns32k-pc532-mach* | ns32k-pc532-ux*) fmt=aout em=pc532mach ;;
266 ns32k-pc532-netbsd* | ns32k-pc532-lites*) fmt=aout em=nbsd532 ;;
267
268 sparc-*-rtems*) fmt=aout ;;
269 sparc-*-sunos4*) fmt=aout em=sun3 ;;
270 sparc-*-aout | sparc*-*-vxworks*)
271 fmt=aout ;;
272 sparc-*-coff) fmt=coff ;;
273 sparc-*-lynxos*) fmt=coff em=lynx ;;
274 sparc-fujitsu-none) fmt=aout ;;
275 sparc-*-elf | sparc-*-solaris*)
276 fmt=elf ;;
277 sparc-*-netbsd*) fmt=aout em=nbsd bfd_gas=yes ;;
278
279 vax-*-bsd* | vax-*-ultrix*)
280 fmt=aout ;;
281 vax-*-vms) fmt=vms ;;
282
283 z8k-*-coff | z8k-*-sim)
284 fmt=coff ;;
285
286 w65-*-*) fmt=coff ;;
287
288 *-*-aout | *-*-scout)
289 fmt=aout ;;
290 *-*-nindy*)
291 fmt=bout ;;
292 *-*-bsd*)
293 fmt=aout em=sun3 ;;
294 *-*-generic) fmt=generic ;;
295 *-*-xray | *-*-hms) fmt=coff ;;
296 *-*-sim) fmt=coff ;;
297 *-*-elf | *-*-sysv4* | *-*-solaris*)
298 AC_MSG_WARN(GAS support for ${generic_target} is incomplete.)
299 fmt=elf dev=yes ;;
300 *-*-vxworks) fmt=aout ;;
301 *-*-netware) fmt=elf ;;
302 esac
303
304 case ${cpu_type}-${fmt} in
305 alpha-*) bfd_gas=yes ;;
306 arm-*) bfd_gas=yes ;;
307 # not yet
308 # i386-aout) bfd_gas=preferred ;;
309 mips-*) bfd_gas=yes ;;
310 ns32k-*) bfd_gas=yes ;;
311 ppc-*) bfd_gas=yes ;;
312 sparc-*) bfd_gas=yes ;;
313 *-elf) bfd_gas=yes ;;
314 *-ecoff) bfd_gas=yes ;;
315 *-som) bfd_gas=yes ;;
316 *) ;;
317 esac
318
319 # Other random stuff.
320
321 # do we need the opcodes library?
322 case ${cpu_type} in
323 vax | i386)
324 ;;
325 *)
326 need_opcodes=yes
327 if test "${shared_opcodes}" = "true"; then
328 # A shared libopcodes must be linked against libbfd.
329 need_bfd=yes
330 fi
331 ;;
332 esac
333
334 test -n "$want_sparc_v9" && AC_DEFINE(SPARC_V9)
335
336 case ${cpu}-${vendor}-${os} in
337 sparc64-*-elf*) AC_DEFINE(SPARC_ARCH64) ;;
338 esac
339
340 case ${cpu_type} in
341 m68k)
342 case ${extra_objects} in
343 *m68k-parse.o*) ;;
344 *) extra_objects="$extra_objects m68k-parse.o" ;;
345 esac
346 ;;
347 esac
348
349 # See if we really can support this configuration with the emulation code.
350
351 if test $this_target = $target ; then
352 primary_bfd_gas=$bfd_gas
353 obj_format=$fmt
354 gas_target=$targ
355 te_file=$em
356
357 if test $bfd_gas = no ; then
358 # Can't support other configurations this way.
359 break
360 fi
361 elif test $bfd_gas = no ; then
362 # Can't support this configuration.
363 break
364 fi
365
366 # From target name and format, produce a list of supported emulations.
367
368 case ${generic_target}-${fmt} in
369 mips-*-irix5*-*) emulation="mipsbelf mipslelf mipself mipsbecoff mipslecoff mipsecoff" ;;
370 mips-*-*-ecoff) case "$endian" in
371 big) emulation="mipsbecoff mipslecoff mipsecoff" ;;
372 *) emulation="mipslecoff mipsbecoff mipsecoff" ;;
373 esac ;;
374 mips-*-*-elf) case "$endian" in
375 big) emulation="mipsbelf mipslelf mipself" ;;
376 *) emulation="mipslelf mipsbelf mipself" ;;
377 esac ;;
378 esac
379
380 emulations="$emulations $emulation"
381
382 done
383
384 # Assign floating point type. Most processors with FP support
385 # IEEE FP. On those that don't support FP at all, usually IEEE
386 # is emulated.
387 case ${target_cpu} in
388 vax | tahoe ) atof=${target_cpu} ;;
389 *) atof=ieee ;;
390 esac
391
392 case "${obj_format}" in
393 "") AC_MSG_ERROR(GAS does not know what format to use for target ${target}) ;;
394 esac
395
396 dnl
397 dnl Make sure the desired support files exist.
398 dnl
399
400 if test ! -r ${srcdir}/config/tc-${target_cpu_type}.c; then
401 AC_MSG_ERROR(GAS does not support target CPU ${target_cpu_type})
402 fi
403
404 if test ! -r ${srcdir}/config/obj-${obj_format}.c; then
405 AC_MSG_ERROR(GAS does not have support for object file format ${obj_format})
406 fi
407
408 # and target makefile frag
409
410 target_frag=${srcdir}/config/${gas_target}.mt
411 if test ! -r ${target_frag}; then
412 target_frag=/dev/null # ick! but subst_file can't be conditionalized
413 fi
414 AC_SUBST_FILE(target_frag)
415
416 case ${user_bfd_gas}-${primary_bfd_gas} in
417 yes-yes | no-no)
418 # We didn't override user's choice.
419 ;;
420 no-yes)
421 AC_MSG_WARN(Use of BFD is required for ${target}; overriding config options.)
422 ;;
423 no-preferred)
424 primary_bfd_gas=no
425 ;;
426 *-preferred)
427 primary_bfd_gas=yes
428 ;;
429 yes-*)
430 primary_bfd_gas=yes
431 ;;
432 -*)
433 # User specified nothing.
434 ;;
435 esac
436
437 # Some COFF configurations want these random other flags set.
438 case ${obj_format} in
439 coff)
440 case ${target_cpu_type} in
441 i386) AC_DEFINE(I386COFF) ;;
442 m68k) AC_DEFINE(M68KCOFF) ;;
443 m88k) AC_DEFINE(M88KCOFF) ;;
444 esac
445 ;;
446 esac
447
448 # Getting this done right is going to be a bitch. Each configuration specified
449 # with --enable-targets=... should be checked for environment, format, cpu, and
450 # bfd_gas setting.
451 #
452 # For each configuration, the necessary object file support code must be linked
453 # in. This might be only one, it might be up to four. The necessary emulation
454 # code needs to be provided, too.
455 #
456 # And then there's "--enable-targets=all"....
457 #
458 # For now, just always do it for MIPS ELF or ECOFF configurations. Sigh.
459
460 formats="${obj_format}"
461 emfiles=""
462 EMULATIONS=""
463 GAS_UNIQ(emulations)
464 for em in . $emulations ; do
465 case $em in
466 .) continue ;;
467 mipsbelf | mipslelf)
468 fmt=elf file=mipself ;;
469 mipsbecoff | mipslecoff)
470 fmt=ecoff file=mipsecoff ;;
471 esac
472 formats="$formats $fmt"
473 emfiles="$emfiles e-$file.o"
474 EMULATIONS="$EMULATIONS &$em,"
475 done
476 GAS_UNIQ(formats)
477 GAS_UNIQ(emfiles)
478 if test `set . $formats ; shift ; echo $#` -gt 1 ; then
479 for fmt in $formats ; do
480 case $fmt in
481 aout) AC_DEFINE(OBJ_MAYBE_AOUT) ;;
482 bout) AC_DEFINE(OBJ_MAYBE_BOUT) ;;
483 coff) AC_DEFINE(OBJ_MAYBE_COFF) ;;
484 ecoff) AC_DEFINE(OBJ_MAYBE_ECOFF) ;;
485 elf) AC_DEFINE(OBJ_MAYBE_ELF) ;;
486 generic) AC_DEFINE(OBJ_MAYBE_GENERIC) ;;
487 hp300) AC_DEFINE(OBJ_MAYBE_HP300) ;;
488 ieee) AC_DEFINE(OBJ_MAYBE_IEEE) ;;
489 som) AC_DEFINE(OBJ_MAYBE_SOM) ;;
490 vms) AC_DEFINE(OBJ_MAYBE_VMS) ;;
491 esac
492 extra_objects="$extra_objects obj-$fmt.o"
493 done
494 obj_format=multi
495 fi
496 if test `set . $emfiles ; shift ; echo $#` -gt 0 ; then
497 te_file=multi
498 extra_objects="$extra_objects $emfiles"
499 DEFAULT_EMULATION=`set . $emulations ; echo $2`
500 AC_DEFINE(USE_EMULATIONS)
501 fi
502 AC_SUBST(extra_objects)
503 AC_DEFINE_UNQUOTED(EMULATIONS, $EMULATIONS)
504 AC_DEFINE_UNQUOTED(DEFAULT_EMULATION, "$DEFAULT_EMULATION")
505
506 files="config/tc-${target_cpu_type}.c config/tc-${target_cpu_type}.h \
507 config/obj-${obj_format}.h config/obj-${obj_format}.c \
508 config/te-${te_file}.h config/atof-${atof}.c \
509 $extra_files"
510 links="targ-cpu.c targ-cpu.h obj-format.h obj-format.c targ-env.h atof-targ.c \
511 $extra_links"
512
513 case ${primary_bfd_gas}-${target_cpu_type}-${obj_format} in
514 yes-*-coff) need_bfd=yes ;;
515 no-*-coff) need_bfd=yes
516 AC_DEFINE(MANY_SEGMENTS) ;;
517 esac
518
519 reject_dev_configs=yes
520
521 case ${reject_dev_configs}-${dev} in
522 yes-yes) # Oops.
523 AC_MSG_ERROR(GAS does not support the ${generic_target} configuration.)
524 ;;
525 esac
526
527 AC_SUBST(target_cpu_type)
528 AC_SUBST(obj_format)
529 AC_SUBST(atof)
530 dnl AC_SUBST(emulation)
531
532 AC_LINK_FILES($files, $links)
533
534 case "${primary_bfd_gas}" in
535 yes) AC_DEFINE(BFD_ASSEMBLER)
536 need_bfd=yes ;;
537 esac
538
539 # do we need the opcodes library?
540 case "${need_opcodes}" in
541 yes)
542 OPCODES_DEP=../opcodes/libopcodes.a
543 OPCODES_LIB='-L../opcodes -lopcodes'
544
545 # We need to handle some special cases for shared libraries.
546 case "${host}" in
547 *-*-sunos*)
548 # On SunOS, we must link against the name we are going to install,
549 # not -lbfd, since SunOS does not support SONAME.
550 if test "${shared_opcodes}" = "true"; then
551 OPCODES_LIB='-L../opcodes -l`echo opcodes | sed '"'"'$(program_transform_name)'"'"'`'
552 fi
553 ;;
554 alpha*-*-osf*)
555 # On Alpha OSF/1, the native linker searches all the -L
556 # directories for any LIB.so files, and only then searches for any
557 # LIB.a files. That means that if there is an installed
558 # libbfd.so, but this build is not done with --enable-shared, the
559 # link will wind up being against the install libbfd.so rather
560 # than the newly built libbfd. To avoid this, we must explicitly
561 # link against libbfd.a when --enable-shared is not used.
562 if test "${shared_opcodes}" != "true"; then
563 OPCODES_LIB='../opcodes/libopcodes.a'
564 fi
565 ;;
566 esac
567 ;;
568 esac
569 AC_SUBST(OPCODES_DEP)
570 AC_SUBST(OPCODES_LIB)
571
572 case "${need_bfd}" in
573 yes)
574 BFDDEP=../bfd/libbfd.a
575 BFDLIB='-L../bfd -lbfd'
576 ALL_OBJ_DEPS="$ALL_OBJ_DEPS ../bfd/bfd.h"
577
578 # We need to handle some special cases for shared libraries
579 case "${host}" in
580 *-*-sunos*)
581 # On SunOS, we must link against the name we are going to install,
582 # not -lbfd, since SunOS does not support SONAME.
583 if test "${shared_bfd}" = "true"; then
584 BFDLIB='-L../bfd -l`echo bfd | sed '"'"'$(program_transform_name)'"'"'`'
585 fi
586 ;;
587 alpha*-*-osf*)
588 # On Alpha OSF/1, the native linker searches all the -L
589 # directories for any LIB.so files, and only then searches for any
590 # LIB.a files. That means that if there is an installed
591 # libbfd.so, but this build is not done with --enable-shared, the
592 # link will wind up being against the install libbfd.so rather
593 # than the newly built libbfd. To avoid this, we must explicitly
594 # link against libbfd.a when --enable-shared is not used.
595 if test "${shared_bfd}" != "true"; then
596 BFDLIB='../bfd/libbfd.a'
597 fi
598 ;;
599 esac
600 ;;
601 esac
602 AC_SUBST(BFDDEP)
603 AC_SUBST(BFDLIB)
604 AC_SUBST(ALL_OBJ_DEPS)
605
606 AC_DEFINE_UNQUOTED(TARGET_ALIAS, "${target_alias}")
607 AC_DEFINE_UNQUOTED(TARGET_CANONICAL, "${target}")
608 AC_DEFINE_UNQUOTED(TARGET_CPU, "${target_cpu}")
609 AC_DEFINE_UNQUOTED(TARGET_VENDOR, "${target_vendor}")
610 AC_DEFINE_UNQUOTED(TARGET_OS, "${target_os}")
611
612 AC_PROG_CC
613 AC_PROG_INSTALL
614
615 AC_CHECK_HEADERS(string.h stdlib.h memory.h strings.h unistd.h stdarg.h varargs.h errno.h sys/types.h)
616
617 # Put this here so that autoconf's "cross-compiling" message doesn't confuse
618 # people who are not cross-compiling but are compiling cross-assemblers.
619 AC_MSG_CHECKING(whether compiling a cross-assembler)
620 if test "${host}" = "${target}"; then
621 cross_gas=no
622 else
623 cross_gas=yes
624 AC_DEFINE(CROSS_COMPILE)
625 fi
626 AC_MSG_RESULT($cross_gas)
627
628 dnl ansidecl.h will deal with const
629 dnl AC_CONST
630 AC_FUNC_ALLOCA
631 AC_C_INLINE
632
633 # VMS doesn't have unlink.
634 AC_CHECK_FUNCS(unlink remove, break)
635
636 # Some systems don't have sbrk().
637 AC_CHECK_FUNCS(sbrk)
638
639 # Some non-ANSI preprocessors botch requoting inside strings. That's bad
640 # enough, but on some of those systems, the assert macro relies on requoting
641 # working properly!
642 GAS_WORKING_ASSERT
643
644 # On some systems, the system header files may not declare malloc, realloc,
645 # and free. There are places where gas needs these functions to have been
646 # declared -- such as when taking their addresses.
647 gas_test_headers="
648 #ifdef HAVE_MEMORY_H
649 #include <memory.h>
650 #endif
651 #ifdef HAVE_STRING_H
652 #include <string.h>
653 #endif
654 #ifdef HAVE_STDLIB_H
655 #include <stdlib.h>
656 #endif
657 #ifdef HAVE_UNISTD_H
658 #include <unistd.h>
659 #endif
660 "
661 GAS_CHECK_DECL_NEEDED(malloc, f, char *(*f)(), $gas_test_headers)
662 GAS_CHECK_DECL_NEEDED(free, f, void (*f)(), $gas_test_headers)
663
664 # Does errno.h declare errno, or do we have to add a separate declaration
665 # for it?
666 GAS_CHECK_DECL_NEEDED(errno, f, int f, [
667 #ifdef HAVE_ERRNO_H
668 #include <errno.h>
669 #endif
670 ])
671
672 HLDFLAGS=
673 RPATH_ENVVAR=LD_LIBRARY_PATH
674 # If we have shared libraries, try to set rpath reasonably.
675 if test "${shared}" = "true"; then
676 case "${host}" in
677 *-*-hpux*)
678 HLDFLAGS='-Wl,+s,+b,$(libdir)'
679 RPATH_ENVVAR=SHLIB_PATH
680 ;;
681 *-*-irix5*)
682 HLDFLAGS='-Wl,-rpath,$(libdir)'
683 ;;
684 *-*-linux*aout*)
685 ;;
686 *-*-linux*)
687 HLDFLAGS='-Wl,-rpath,$(libdir)'
688 ;;
689 *-*-sysv4* | *-*-solaris*)
690 HLDFLAGS='-R $(libdir)'
691 ;;
692 esac
693 fi
694
695 # On SunOS, if the linker supports the -rpath option, use it to
696 # prevent ../bfd and ../opcodes from being included in the run time
697 # search path.
698 case "${host}" in
699 *-*-sunos*)
700 echo 'main () { }' > conftest.c
701 ${CC} -o conftest -Wl,-rpath= conftest.c >/dev/null 2>conftest.t
702 if grep 'unrecognized' conftest.t >/dev/null 2>&1; then
703 :
704 elif grep 'No such file' conftest.t >/dev/null 2>&1; then
705 :
706 elif grep 'do not mix' conftest.t >/dev/null 2>&1; then
707 :
708 elif test "${shared}" = "true"; then
709 HLDFLAGS='-Wl,-rpath=$(libdir)'
710 else
711 HLDFLAGS='-Wl,-rpath='
712 fi
713 rm -f conftest.t conftest.c conftest
714 ;;
715 esac
716 AC_SUBST(HLDFLAGS)
717 AC_SUBST(RPATH_ENVVAR)
718
719 dnl This must come last.
720 AC_OUTPUT(Makefile doc/Makefile .gdbinit:gdbinit.in)
This page took 0.043548 seconds and 4 git commands to generate.