1 @c Copyright (C) 1991-2015 Free Software Foundation, Inc.
2 @c This is part of the GAS manual.
3 @c For copying conditions, see the file as.texinfo.
7 @chapter MIPS Dependent Features
10 @node Machine Dependencies
11 @chapter MIPS Dependent Features
14 @cindex MIPS processor
15 @sc{gnu} @code{@value{AS}} for MIPS architectures supports several
16 different MIPS processors, and MIPS ISA levels I through V, MIPS32,
17 and MIPS64. For information about the MIPS instruction set, see
18 @cite{MIPS RISC Architecture}, by Kane and Heindrich (Prentice-Hall).
19 For an overview of MIPS assembly conventions, see ``Appendix D:
20 Assembly Language Programming'' in the same work.
23 * MIPS Options:: Assembler options
24 * MIPS Macros:: High-level assembly macros
25 * MIPS Symbol Sizes:: Directives to override the size of symbols
26 * MIPS Small Data:: Controlling the use of small data accesses
27 * MIPS ISA:: Directives to override the ISA level
28 * MIPS assembly options:: Directives to control code generation
29 * MIPS autoextend:: Directives for extending MIPS 16 bit instructions
30 * MIPS insn:: Directive to mark data as an instruction
31 * MIPS FP ABIs:: Marking which FP ABI is in use
32 * MIPS NaN Encodings:: Directives to record which NaN encoding is being used
33 * MIPS Option Stack:: Directives to save and restore options
34 * MIPS ASE Instruction Generation Overrides:: Directives to control
35 generation of MIPS ASE instructions
36 * MIPS Floating-Point:: Directives to override floating-point options
37 * MIPS Syntax:: MIPS specific syntactical considerations
41 @section Assembler options
43 The MIPS configurations of @sc{gnu} @code{@value{AS}} support these
47 @cindex @code{-G} option (MIPS)
49 Set the ``small data'' limit to @var{n} bytes. The default limit is 8 bytes.
50 @xref{MIPS Small Data,, Controlling the use of small data accesses}.
52 @cindex @code{-EB} option (MIPS)
53 @cindex @code{-EL} option (MIPS)
54 @cindex MIPS big-endian output
55 @cindex MIPS little-endian output
56 @cindex big-endian output, MIPS
57 @cindex little-endian output, MIPS
60 Any MIPS configuration of @code{@value{AS}} can select big-endian or
61 little-endian output at run time (unlike the other @sc{gnu} development
62 tools, which must be configured for one or the other). Use @samp{-EB}
63 to select big-endian output, and @samp{-EL} for little-endian.
66 @cindex PIC selection, MIPS
67 @cindex @option{-KPIC} option, MIPS
68 Generate SVR4-style PIC. This option tells the assembler to generate
69 SVR4-style position-independent macro expansions. It also tells the
70 assembler to mark the output file as PIC.
73 @cindex @option{-mvxworks-pic} option, MIPS
74 Generate VxWorks PIC. This option tells the assembler to generate
75 VxWorks-style position-independent macro expansions.
77 @cindex MIPS architecture options
93 Generate code for a particular MIPS Instruction Set Architecture level.
94 @samp{-mips1} corresponds to the R2000 and R3000 processors,
95 @samp{-mips2} to the R6000 processor, @samp{-mips3} to the
96 R4000 processor, and @samp{-mips4} to the R8000 and R10000 processors.
97 @samp{-mips5}, @samp{-mips32}, @samp{-mips32r2}, @samp{-mips32r3},
98 @samp{-mips32r5}, @samp{-mips32r6}, @samp{-mips64}, @samp{-mips64r2},
99 @samp{-mips64r3}, @samp{-mips64r5}, and @samp{-mips64r6} correspond to
100 generic MIPS V, MIPS32, MIPS32 Release 2, MIPS32 Release 3, MIPS32
101 Release 5, MIPS32 Release 6, MIPS64, and MIPS64 Release 2, MIPS64
102 Release 3, MIPS64 Release 5, and MIPS64 Release 6 ISA processors,
103 respectively. You can also switch instruction sets during the assembly;
104 see @ref{MIPS ISA, Directives to override the ISA level}.
108 Some macros have different expansions for 32-bit and 64-bit registers.
109 The register sizes are normally inferred from the ISA and ABI, but these
110 flags force a certain group of registers to be treated as 32 bits wide at
111 all times. @samp{-mgp32} controls the size of general-purpose registers
112 and @samp{-mfp32} controls the size of floating-point registers.
114 The @code{.set gp=32} and @code{.set fp=32} directives allow the size
115 of registers to be changed for parts of an object. The default value is
116 restored by @code{.set gp=default} and @code{.set fp=default}.
118 On some MIPS variants there is a 32-bit mode flag; when this flag is
119 set, 64-bit instructions generate a trap. Also, some 32-bit OSes only
120 save the 32-bit registers on a context switch, so it is essential never
121 to use the 64-bit registers.
125 Assume that 64-bit registers are available. This is provided in the
126 interests of symmetry with @samp{-mgp32} and @samp{-mfp32}.
128 The @code{.set gp=64} and @code{.set fp=64} directives allow the size
129 of registers to be changed for parts of an object. The default value is
130 restored by @code{.set gp=default} and @code{.set fp=default}.
133 Make no assumptions about whether 32-bit or 64-bit floating-point
134 registers are available. This is provided to support having modules
135 compatible with either @samp{-mfp32} or @samp{-mfp64}. This option can
136 only be used with MIPS II and above.
138 The @code{.set fp=xx} directive allows a part of an object to be marked
139 as not making assumptions about 32-bit or 64-bit FP registers. The
140 default value is restored by @code{.set fp=default}.
143 @itemx -mno-odd-spreg
144 Enable use of floating-point operations on odd-numbered single-precision
145 registers when supported by the ISA. @samp{-mfpxx} implies
146 @samp{-mno-odd-spreg}, otherwise the default is @samp{-modd-spreg}
150 Generate code for the MIPS 16 processor. This is equivalent to putting
151 @code{.set mips16} at the start of the assembly file. @samp{-no-mips16}
152 turns off this option.
155 @itemx -mno-micromips
156 Generate code for the microMIPS processor. This is equivalent to putting
157 @code{.set micromips} at the start of the assembly file. @samp{-mno-micromips}
158 turns off this option. This is equivalent to putting @code{.set nomicromips}
159 at the start of the assembly file.
162 @itemx -mno-smartmips
163 Enables the SmartMIPS extensions to the MIPS32 instruction set, which
164 provides a number of new instructions which target smartcard and
165 cryptographic applications. This is equivalent to putting
166 @code{.set smartmips} at the start of the assembly file.
167 @samp{-mno-smartmips} turns off this option.
171 Generate code for the MIPS-3D Application Specific Extension.
172 This tells the assembler to accept MIPS-3D instructions.
173 @samp{-no-mips3d} turns off this option.
177 Generate code for the MDMX Application Specific Extension.
178 This tells the assembler to accept MDMX instructions.
179 @samp{-no-mdmx} turns off this option.
183 Generate code for the DSP Release 1 Application Specific Extension.
184 This tells the assembler to accept DSP Release 1 instructions.
185 @samp{-mno-dsp} turns off this option.
189 Generate code for the DSP Release 2 Application Specific Extension.
190 This option implies -mdsp.
191 This tells the assembler to accept DSP Release 2 instructions.
192 @samp{-mno-dspr2} turns off this option.
196 Generate code for the MT Application Specific Extension.
197 This tells the assembler to accept MT instructions.
198 @samp{-mno-mt} turns off this option.
202 Generate code for the MCU Application Specific Extension.
203 This tells the assembler to accept MCU instructions.
204 @samp{-mno-mcu} turns off this option.
208 Generate code for the MIPS SIMD Architecture Extension.
209 This tells the assembler to accept MSA instructions.
210 @samp{-mno-msa} turns off this option.
214 Generate code for the MIPS eXtended Physical Address (XPA) Extension.
215 This tells the assembler to accept XPA instructions.
216 @samp{-mno-xpa} turns off this option.
220 Generate code for the Virtualization Application Specific Extension.
221 This tells the assembler to accept Virtualization instructions.
222 @samp{-mno-virt} turns off this option.
226 Only use 32-bit instruction encodings when generating code for the
227 microMIPS processor. This option inhibits the use of any 16-bit
228 instructions. This is equivalent to putting @code{.set insn32} at
229 the start of the assembly file. @samp{-mno-insn32} turns off this
230 option. This is equivalent to putting @code{.set noinsn32} at the
231 start of the assembly file. By default @samp{-mno-insn32} is
232 selected, allowing all instructions to be used.
236 Cause nops to be inserted if the read of the destination register
237 of an mfhi or mflo instruction occurs in the following two instructions.
240 @itemx -mno-fix-rm7000
241 Cause nops to be inserted if a dmult or dmultu instruction is
242 followed by a load instruction.
244 @item -mfix-loongson2f-jump
245 @itemx -mno-fix-loongson2f-jump
246 Eliminate instruction fetch from outside 256M region to work around the
247 Loongson2F @samp{jump} instructions. Without it, under extreme cases,
248 the kernel may crash. The issue has been solved in latest processor
249 batches, but this fix has no side effect to them.
251 @item -mfix-loongson2f-nop
252 @itemx -mno-fix-loongson2f-nop
253 Replace nops by @code{or at,at,zero} to work around the Loongson2F
254 @samp{nop} errata. Without it, under extreme cases, the CPU might
255 deadlock. The issue has been solved in later Loongson2F batches, but
256 this fix has no side effect to them.
259 @itemx -mno-fix-vr4120
260 Insert nops to work around certain VR4120 errata. This option is
261 intended to be used on GCC-generated code: it is not designed to catch
262 all problems in hand-written assembler code.
265 @itemx -mno-fix-vr4130
266 Insert nops to work around the VR4130 @samp{mflo}/@samp{mfhi} errata.
270 Insert nops to work around the 24K @samp{eret}/@samp{deret} errata.
273 @itemx -mno-fix-cn63xxp1
274 Replace @code{pref} hints 0 - 4 and 6 - 24 with hint 28 to work around
275 certain CN63XXP1 errata.
279 Generate code for the LSI R4010 chip. This tells the assembler to
280 accept the R4010-specific instructions (@samp{addciu}, @samp{ffc},
281 etc.), and to not schedule @samp{nop} instructions around accesses to
282 the @samp{HI} and @samp{LO} registers. @samp{-no-m4010} turns off this
287 Generate code for the MIPS R4650 chip. This tells the assembler to accept
288 the @samp{mad} and @samp{madu} instruction, and to not schedule @samp{nop}
289 instructions around accesses to the @samp{HI} and @samp{LO} registers.
290 @samp{-no-m4650} turns off this option.
296 For each option @samp{-m@var{nnnn}}, generate code for the MIPS
297 R@var{nnnn} chip. This tells the assembler to accept instructions
298 specific to that chip, and to schedule for that chip's hazards.
300 @item -march=@var{cpu}
301 Generate code for a particular MIPS CPU. It is exactly equivalent to
302 @samp{-m@var{cpu}}, except that there are more value of @var{cpu}
303 understood. Valid @var{cpu} value are:
390 For compatibility reasons, @samp{@var{n}x} and @samp{@var{b}fx} are
391 accepted as synonyms for @samp{@var{n}f1_1}. These values are
394 @item -mtune=@var{cpu}
395 Schedule and tune for a particular MIPS CPU. Valid @var{cpu} values are
396 identical to @samp{-march=@var{cpu}}.
398 @item -mabi=@var{abi}
399 Record which ABI the source code uses. The recognized arguments
400 are: @samp{32}, @samp{n32}, @samp{o64}, @samp{64} and @samp{eabi}.
406 Equivalent to adding @code{.set sym32} or @code{.set nosym32} to
407 the beginning of the assembler input. @xref{MIPS Symbol Sizes}.
409 @cindex @code{-nocpp} ignored (MIPS)
411 This option is ignored. It is accepted for command-line compatibility with
412 other assemblers, which use it to turn off C style preprocessing. With
413 @sc{gnu} @code{@value{AS}}, there is no need for @samp{-nocpp}, because the
414 @sc{gnu} assembler itself never runs the C preprocessor.
418 Disable or enable floating-point instructions. Note that by default
419 floating-point instructions are always allowed even with CPU targets
420 that don't have support for these instructions.
423 @itemx -mdouble-float
424 Disable or enable double-precision floating-point operations. Note
425 that by default double-precision floating-point operations are always
426 allowed even with CPU targets that don't have support for these
429 @item --construct-floats
430 @itemx --no-construct-floats
431 The @code{--no-construct-floats} option disables the construction of
432 double width floating point constants by loading the two halves of the
433 value into the two single width floating point registers that make up
434 the double width register. This feature is useful if the processor
435 support the FR bit in its status register, and this bit is known (by
436 the programmer) to be set. This bit prevents the aliasing of the double
437 width register by the single width registers.
439 By default @code{--construct-floats} is selected, allowing construction
440 of these floating point constants.
443 @itemx --no-relax-branch
444 The @samp{--relax-branch} option enables the relaxation of out-of-range
445 branches. Any branches whose target cannot be reached directly are
446 converted to a small instruction sequence including an inverse-condition
447 branch to the physically next instruction, and a jump to the original
448 target is inserted between the two instructions. In PIC code the jump
449 will involve further instructions for address calculation.
451 The @code{BC1ANY2F}, @code{BC1ANY2T}, @code{BC1ANY4F}, @code{BC1ANY4T},
452 @code{BPOSGE32} and @code{BPOSGE64} instructions are excluded from
453 relaxation, because they have no complementing counterparts. They could
454 be relaxed with the use of a longer sequence involving another branch,
455 however this has not been implemented and if their target turns out of
456 reach, they produce an error even if branch relaxation is enabled.
458 Also no MIPS16 branches are ever relaxed.
460 By default @samp{--no-relax-branch} is selected, causing any out-of-range
461 branches to produce an error.
463 @cindex @option{-mnan=} command line option, MIPS
464 @item -mnan=@var{encoding}
465 This option indicates whether the source code uses the IEEE 2008
466 NaN encoding (@option{-mnan=2008}) or the original MIPS encoding
467 (@option{-mnan=legacy}). It is equivalent to adding a @code{.nan}
468 directive to the beginning of the source file. @xref{MIPS NaN Encodings}.
470 @option{-mnan=legacy} is the default if no @option{-mnan} option or
471 @code{.nan} directive is used.
475 @c FIXME! (1) reflect these options (next item too) in option summaries;
476 @c (2) stop teasing, say _which_ instructions expanded _how_.
477 @code{@value{AS}} automatically macro expands certain division and
478 multiplication instructions to check for overflow and division by zero. This
479 option causes @code{@value{AS}} to generate code to take a trap exception
480 rather than a break exception when an error is detected. The trap instructions
481 are only supported at Instruction Set Architecture level 2 and higher.
485 Generate code to take a break exception rather than a trap exception when an
486 error is detected. This is the default.
490 Control generation of @code{.pdr} sections. Off by default on IRIX, on
495 When generating code using the Unix calling conventions (selected by
496 @samp{-KPIC} or @samp{-mcall_shared}), gas will normally generate code
497 which can go into a shared library. The @samp{-mno-shared} option
498 tells gas to generate code which uses the calling convention, but can
499 not go into a shared library. The resulting code is slightly more
500 efficient. This option only affects the handling of the
501 @samp{.cpload} and @samp{.cpsetup} pseudo-ops.
505 @section High-level assembly macros
507 MIPS assemblers have traditionally provided a wider range of
508 instructions than the MIPS architecture itself. These extra
509 instructions are usually referred to as ``macro'' instructions
510 @footnote{The term ``macro'' is somewhat overloaded here, since
511 these macros have no relation to those defined by @code{.macro},
512 @pxref{Macro,, @code{.macro}}.}.
514 Some MIPS macro instructions extend an underlying architectural instruction
515 while others are entirely new. An example of the former type is @code{and},
516 which allows the third operand to be either a register or an arbitrary
517 immediate value. Examples of the latter type include @code{bgt}, which
518 branches to the third operand when the first operand is greater than
519 the second operand, and @code{ulh}, which implements an unaligned
522 One of the most common extensions provided by macros is to expand
523 memory offsets to the full address range (32 or 64 bits) and to allow
524 symbolic offsets such as @samp{my_data + 4} to be used in place of
525 integer constants. For example, the architectural instruction
526 @code{lbu} allows only a signed 16-bit offset, whereas the macro
527 @code{lbu} allows code such as @samp{lbu $4,array+32769($5)}.
528 The implementation of these symbolic offsets depends on several factors,
529 such as whether the assembler is generating SVR4-style PIC (selected by
530 @option{-KPIC}, @pxref{MIPS Options,, Assembler options}), the size of symbols
531 (@pxref{MIPS Symbol Sizes,, Directives to override the size of symbols}),
532 and the small data limit (@pxref{MIPS Small Data,, Controlling the use
533 of small data accesses}).
535 @kindex @code{.set macro}
536 @kindex @code{.set nomacro}
537 Sometimes it is undesirable to have one assembly instruction expand
538 to several machine instructions. The directive @code{.set nomacro}
539 tells the assembler to warn when this happens. @code{.set macro}
540 restores the default behavior.
542 @cindex @code{at} register, MIPS
543 @kindex @code{.set at=@var{reg}}
544 Some macro instructions need a temporary register to store intermediate
545 results. This register is usually @code{$1}, also known as @code{$at},
546 but it can be changed to any core register @var{reg} using
547 @code{.set at=@var{reg}}. Note that @code{$at} always refers
548 to @code{$1} regardless of which register is being used as the
551 @kindex @code{.set at}
552 @kindex @code{.set noat}
553 Implicit uses of the temporary register in macros could interfere with
554 explicit uses in the assembly code. The assembler therefore warns
555 whenever it sees an explicit use of the temporary register. The directive
556 @code{.set noat} silences this warning while @code{.set at} restores
557 the default behavior. It is safe to use @code{.set noat} while
558 @code{.set nomacro} is in effect since single-instruction macros
559 never need a temporary register.
561 Note that while the @sc{gnu} assembler provides these macros for compatibility,
562 it does not make any attempt to optimize them with the surrounding code.
564 @node MIPS Symbol Sizes
565 @section Directives to override the size of symbols
567 @kindex @code{.set sym32}
568 @kindex @code{.set nosym32}
569 The n64 ABI allows symbols to have any 64-bit value. Although this
570 provides a great deal of flexibility, it means that some macros have
571 much longer expansions than their 32-bit counterparts. For example,
572 the non-PIC expansion of @samp{dla $4,sym} is usually:
577 daddiu $4,$4,%higher(sym)
578 daddiu $1,$1,%lo(sym)
583 whereas the 32-bit expansion is simply:
587 daddiu $4,$4,%lo(sym)
590 n64 code is sometimes constructed in such a way that all symbolic
591 constants are known to have 32-bit values, and in such cases, it's
592 preferable to use the 32-bit expansion instead of the 64-bit
595 You can use the @code{.set sym32} directive to tell the assembler
596 that, from this point on, all expressions of the form
597 @samp{@var{symbol}} or @samp{@var{symbol} + @var{offset}}
598 have 32-bit values. For example:
607 will cause the assembler to treat @samp{sym}, @code{sym+16} and
608 @code{sym+0x8000} as 32-bit values. The handling of non-symbolic
609 addresses is not affected.
611 The directive @code{.set nosym32} ends a @code{.set sym32} block and
612 reverts to the normal behavior. It is also possible to change the
613 symbol size using the command-line options @option{-msym32} and
616 These options and directives are always accepted, but at present,
617 they have no effect for anything other than n64.
619 @node MIPS Small Data
620 @section Controlling the use of small data accesses
622 @c This section deliberately glosses over the possibility of using -G
623 @c in SVR4-style PIC, as could be done on IRIX. We don't support that.
624 @cindex small data, MIPS
625 @cindex @code{gp} register, MIPS
626 It often takes several instructions to load the address of a symbol.
627 For example, when @samp{addr} is a 32-bit symbol, the non-PIC expansion
628 of @samp{dla $4,addr} is usually:
632 daddiu $4,$4,%lo(addr)
635 The sequence is much longer when @samp{addr} is a 64-bit symbol.
636 @xref{MIPS Symbol Sizes,, Directives to override the size of symbols}.
638 In order to cut down on this overhead, most embedded MIPS systems
639 set aside a 64-kilobyte ``small data'' area and guarantee that all
640 data of size @var{n} and smaller will be placed in that area.
641 The limit @var{n} is passed to both the assembler and the linker
642 using the command-line option @option{-G @var{n}}, @pxref{MIPS Options,,
643 Assembler options}. Note that the same value of @var{n} must be used
644 when linking and when assembling all input files to the link; any
645 inconsistency could cause a relocation overflow error.
647 The size of an object in the @code{.bss} section is set by the
648 @code{.comm} or @code{.lcomm} directive that defines it. The size of
649 an external object may be set with the @code{.extern} directive. For
650 example, @samp{.extern sym,4} declares that the object at @code{sym}
651 is 4 bytes in length, while leaving @code{sym} otherwise undefined.
653 When no @option{-G} option is given, the default limit is 8 bytes.
654 The option @option{-G 0} prevents any data from being automatically
657 It is also possible to mark specific objects as small by putting them
658 in the special sections @code{.sdata} and @code{.sbss}, which are
659 ``small'' counterparts of @code{.data} and @code{.bss} respectively.
660 The toolchain will treat such data as small regardless of the
663 On startup, systems that support a small data area are expected to
664 initialize register @code{$28}, also known as @code{$gp}, in such a
665 way that small data can be accessed using a 16-bit offset from that
666 register. For example, when @samp{addr} is small data,
667 the @samp{dla $4,addr} instruction above is equivalent to:
670 daddiu $4,$28,%gp_rel(addr)
673 Small data is not supported for SVR4-style PIC.
676 @section Directives to override the ISA level
678 @cindex MIPS ISA override
679 @kindex @code{.set mips@var{n}}
680 @sc{gnu} @code{@value{AS}} supports an additional directive to change
681 the MIPS Instruction Set Architecture level on the fly: @code{.set
682 mips@var{n}}. @var{n} should be a number from 0 to 5, or 32, 32r2, 32r3,
683 32r5, 32r6, 64, 64r2, 64r3, 64r5 or 64r6.
684 The values other than 0 make the assembler accept instructions
685 for the corresponding ISA level, from that point on in the
686 assembly. @code{.set mips@var{n}} affects not only which instructions
687 are permitted, but also how certain macros are expanded. @code{.set
688 mips0} restores the ISA level to its original level: either the
689 level you selected with command line options, or the default for your
690 configuration. You can use this feature to permit specific MIPS III
691 instructions while assembling in 32 bit mode. Use this directive with
694 @cindex MIPS CPU override
695 @kindex @code{.set arch=@var{cpu}}
696 The @code{.set arch=@var{cpu}} directive provides even finer control.
697 It changes the effective CPU target and allows the assembler to use
698 instructions specific to a particular CPU. All CPUs supported by the
699 @samp{-march} command line option are also selectable by this directive.
700 The original value is restored by @code{.set arch=default}.
702 The directive @code{.set mips16} puts the assembler into MIPS 16 mode,
703 in which it will assemble instructions for the MIPS 16 processor. Use
704 @code{.set nomips16} to return to normal 32 bit mode.
706 Traditional MIPS assemblers do not support this directive.
708 The directive @code{.set micromips} puts the assembler into microMIPS mode,
709 in which it will assemble instructions for the microMIPS processor. Use
710 @code{.set nomicromips} to return to normal 32 bit mode.
712 Traditional MIPS assemblers do not support this directive.
714 @node MIPS assembly options
715 @section Directives to control code generation
717 @cindex MIPS directives to override command line options
718 @kindex @code{.module}
719 The @code{.module} directive allows command line options to be set directly
720 from assembly. The format of the directive matches the @code{.set}
721 directive but only those options which are relevant to a whole module are
722 supported. The effect of a @code{.module} directive is the same as the
723 corresponding command line option. Where @code{.set} directives support
724 returning to a default then the @code{.module} directives do not as they
727 These module-level directives must appear first in assembly.
729 Traditional MIPS assemblers do not support this directive.
731 @cindex MIPS 32-bit microMIPS instruction generation override
732 @kindex @code{.set insn32}
733 @kindex @code{.set noinsn32}
734 The directive @code{.set insn32} makes the assembler only use 32-bit
735 instruction encodings when generating code for the microMIPS processor.
736 This directive inhibits the use of any 16-bit instructions from that
737 point on in the assembly. The @code{.set noinsn32} directive allows
738 16-bit instructions to be accepted.
740 Traditional MIPS assemblers do not support this directive.
742 @node MIPS autoextend
743 @section Directives for extending MIPS 16 bit instructions
745 @kindex @code{.set autoextend}
746 @kindex @code{.set noautoextend}
747 By default, MIPS 16 instructions are automatically extended to 32 bits
748 when necessary. The directive @code{.set noautoextend} will turn this
749 off. When @code{.set noautoextend} is in effect, any 32 bit instruction
750 must be explicitly extended with the @code{.e} modifier (e.g.,
751 @code{li.e $4,1000}). The directive @code{.set autoextend} may be used
752 to once again automatically extend instructions when necessary.
754 This directive is only meaningful when in MIPS 16 mode. Traditional
755 MIPS assemblers do not support this directive.
758 @section Directive to mark data as an instruction
761 The @code{.insn} directive tells @code{@value{AS}} that the following
762 data is actually instructions. This makes a difference in MIPS 16 and
763 microMIPS modes: when loading the address of a label which precedes
764 instructions, @code{@value{AS}} automatically adds 1 to the value, so
765 that jumping to the loaded address will do the right thing.
767 @kindex @code{.global}
768 The @code{.global} and @code{.globl} directives supported by
769 @code{@value{AS}} will by default mark the symbol as pointing to a
770 region of data not code. This means that, for example, any
771 instructions following such a symbol will not be disassembled by
772 @code{objdump} as it will regard them as data. To change this
773 behavior an optional section name can be placed after the symbol name
774 in the @code{.global} directive. If this section exists and is known
775 to be a code section, then the symbol will be marked as pointing at
776 code not data. Ie the syntax for the directive is:
778 @code{.global @var{symbol}[ @var{section}][, @var{symbol}[ @var{section}]] ...},
780 Here is a short example:
783 .global foo .text, bar, baz .data
794 @section Directives to control the FP ABI
796 * MIPS FP ABI History:: History of FP ABIs
797 * MIPS FP ABI Variants:: Supported FP ABIs
798 * MIPS FP ABI Selection:: Automatic selection of FP ABI
799 * MIPS FP ABI Compatibility:: Linking different FP ABI variants
802 @node MIPS FP ABI History
803 @subsection History of FP ABIs
804 @cindex @code{.gnu_attribute 4, @var{n}} directive, MIPS
805 @cindex @code{.gnu_attribute Tag_GNU_MIPS_ABI_FP, @var{n}} directive, MIPS
806 The MIPS ABIs support a variety of different floating-point extensions
807 where calling-convention and register sizes vary for floating-point data.
808 The extensions exist to support a wide variety of optional architecture
809 features. The resulting ABI variants are generally incompatible with each
810 other and must be tracked carefully.
812 Traditionally the use of an explicit @code{.gnu_attribute 4, @var{n}}
813 directive is used to indicate which ABI is in use by a specific module.
814 It was then left to the user to ensure that command line options and the
815 selected ABI were compatible with some potential for inconsistencies.
817 @node MIPS FP ABI Variants
818 @subsection Supported FP ABIs
819 The supported floating-point ABI variants are:
822 @item 0 - No floating-point
823 This variant is used to indicate that floating-point is not used within
824 the module at all and therefore has no impact on the ABI. This is the
827 @item 1 - Double-precision
828 This variant indicates that double-precision support is used. For 64-bit
829 ABIs this means that 64-bit wide floating-point registers are required.
830 For 32-bit ABIs this means that 32-bit wide floating-point registers are
831 required and double-precision operations use pairs of registers.
833 @item 2 - Single-precision
834 This variant indicates that single-precision support is used. Double
835 precision operations will be supported via soft-float routines.
838 This variant indicates that although floating-point support is used all
839 operations are emulated in software. This means the ABI is modified to
840 pass all floating-point data in general-purpose registers.
843 This variant existed as an initial attempt at supporting 64-bit wide
844 floating-point registers for O32 ABI on a MIPS32r2 CPU. This has been
845 superseded by 5, 6 and 7.
847 @item 5 - Double-precision 32-bit CPU, 32-bit or 64-bit FPU
848 This variant is used by 32-bit ABIs to indicate that the floating-point
849 code in the module has been designed to operate correctly with either
850 32-bit wide or 64-bit wide floating-point registers. Double-precision
851 support is used. Only O32 currently supports this variant and requires
852 a minimum architecture of MIPS II.
854 @item 6 - Double-precision 32-bit FPU, 64-bit FPU
855 This variant is used by 32-bit ABIs to indicate that the floating-point
856 code in the module requires 64-bit wide floating-point registers.
857 Double-precision support is used. Only O32 currently supports this
858 variant and requires a minimum architecture of MIPS32r2.
860 @item 7 - Double-precision compat 32-bit FPU, 64-bit FPU
861 This variant is used by 32-bit ABIs to indicate that the floating-point
862 code in the module requires 64-bit wide floating-point registers.
863 Double-precision support is used. This differs from the previous ABI
864 as it restricts use of odd-numbered single-precision registers. Only
865 O32 currently supports this variant and requires a minimum architecture
869 @node MIPS FP ABI Selection
870 @subsection Automatic selection of FP ABI
871 @cindex @code{.module fp=@var{nn}} directive, MIPS
872 In order to simplify and add safety to the process of selecting the
873 correct floating-point ABI, the assembler will automatically infer the
874 correct @code{.gnu_attribute 4, @var{n}} directive based on command line
875 options and @code{.module} overrides. Where an explicit
876 @code{.gnu_attribute 4, @var{n}} directive has been seen then a warning
877 will be raised if it does not match an inferred setting.
879 The floating-point ABI is inferred as follows. If @samp{-msoft-float}
880 has been used the module will be marked as soft-float. If
881 @samp{-msingle-float} has been used then the module will be marked as
882 single-precision. The remaining ABIs are then selected based
883 on the FP register width. Double-precision is selected if the width
884 of GP and FP registers match and the special double-precision variants
885 for 32-bit ABIs are then selected depending on @samp{-mfpxx},
886 @samp{-mfp64} and @samp{-mno-odd-spreg}.
888 @node MIPS FP ABI Compatibility
889 @subsection Linking different FP ABI variants
890 Modules using the default FP ABI (no floating-point) can be linked with
891 any other (singular) FP ABI variant.
893 Special compatibility support exists for O32 with the four
894 double-precision FP ABI variants. The @samp{-mfpxx} FP ABI is specifically
895 designed to be compatible with the standard double-precision ABI and the
896 @samp{-mfp64} FP ABIs. This makes it desirable for O32 modules to be
897 built as @samp{-mfpxx} to ensure the maximum compatibility with other
898 modules produced for more specific needs. The only FP ABIs which cannot
899 be linked together are the standard double-precision ABI and the full
900 @samp{-mfp64} ABI with @samp{-modd-spreg}.
902 @node MIPS NaN Encodings
903 @section Directives to record which NaN encoding is being used
905 @cindex MIPS IEEE 754 NaN data encoding selection
906 @cindex @code{.nan} directive, MIPS
907 The IEEE 754 floating-point standard defines two types of not-a-number
908 (NaN) data: ``signalling'' NaNs and ``quiet'' NaNs. The original version
909 of the standard did not specify how these two types should be
910 distinguished. Most implementations followed the i387 model, in which
911 the first bit of the significand is set for quiet NaNs and clear for
912 signalling NaNs. However, the original MIPS implementation assigned the
913 opposite meaning to the bit, so that it was set for signalling NaNs and
914 clear for quiet NaNs.
916 The 2008 revision of the standard formally suggested the i387 choice
917 and as from Sep 2012 the current release of the MIPS architecture
918 therefore optionally supports that form. Code that uses one NaN encoding
919 would usually be incompatible with code that uses the other NaN encoding,
920 so MIPS ELF objects have a flag (@code{EF_MIPS_NAN2008}) to record which
921 encoding is being used.
923 Assembly files can use the @code{.nan} directive to select between the
924 two encodings. @samp{.nan 2008} says that the assembly file uses the
925 IEEE 754-2008 encoding while @samp{.nan legacy} says that the file uses
926 the original MIPS encoding. If several @code{.nan} directives are given,
927 the final setting is the one that is used.
929 The command-line options @option{-mnan=legacy} and @option{-mnan=2008}
930 can be used instead of @samp{.nan legacy} and @samp{.nan 2008}
931 respectively. However, any @code{.nan} directive overrides the
932 command-line setting.
934 @samp{.nan legacy} is the default if no @code{.nan} directive or
935 @option{-mnan} option is given.
937 Note that @sc{gnu} @code{@value{AS}} does not produce NaNs itself and
938 therefore these directives do not affect code generation. They simply
939 control the setting of the @code{EF_MIPS_NAN2008} flag.
941 Traditional MIPS assemblers do not support these directives.
943 @node MIPS Option Stack
944 @section Directives to save and restore options
946 @cindex MIPS option stack
947 @kindex @code{.set push}
948 @kindex @code{.set pop}
949 The directives @code{.set push} and @code{.set pop} may be used to save
950 and restore the current settings for all the options which are
951 controlled by @code{.set}. The @code{.set push} directive saves the
952 current settings on a stack. The @code{.set pop} directive pops the
953 stack and restores the settings.
955 These directives can be useful inside an macro which must change an
956 option such as the ISA level or instruction reordering but does not want
957 to change the state of the code which invoked the macro.
959 Traditional MIPS assemblers do not support these directives.
961 @node MIPS ASE Instruction Generation Overrides
962 @section Directives to control generation of MIPS ASE instructions
964 @cindex MIPS MIPS-3D instruction generation override
965 @kindex @code{.set mips3d}
966 @kindex @code{.set nomips3d}
967 The directive @code{.set mips3d} makes the assembler accept instructions
968 from the MIPS-3D Application Specific Extension from that point on
969 in the assembly. The @code{.set nomips3d} directive prevents MIPS-3D
970 instructions from being accepted.
972 @cindex SmartMIPS instruction generation override
973 @kindex @code{.set smartmips}
974 @kindex @code{.set nosmartmips}
975 The directive @code{.set smartmips} makes the assembler accept
976 instructions from the SmartMIPS Application Specific Extension to the
977 MIPS32 ISA from that point on in the assembly. The
978 @code{.set nosmartmips} directive prevents SmartMIPS instructions from
981 @cindex MIPS MDMX instruction generation override
982 @kindex @code{.set mdmx}
983 @kindex @code{.set nomdmx}
984 The directive @code{.set mdmx} makes the assembler accept instructions
985 from the MDMX Application Specific Extension from that point on
986 in the assembly. The @code{.set nomdmx} directive prevents MDMX
987 instructions from being accepted.
989 @cindex MIPS DSP Release 1 instruction generation override
990 @kindex @code{.set dsp}
991 @kindex @code{.set nodsp}
992 The directive @code{.set dsp} makes the assembler accept instructions
993 from the DSP Release 1 Application Specific Extension from that point
994 on in the assembly. The @code{.set nodsp} directive prevents DSP
995 Release 1 instructions from being accepted.
997 @cindex MIPS DSP Release 2 instruction generation override
998 @kindex @code{.set dspr2}
999 @kindex @code{.set nodspr2}
1000 The directive @code{.set dspr2} makes the assembler accept instructions
1001 from the DSP Release 2 Application Specific Extension from that point
1002 on in the assembly. This directive implies @code{.set dsp}. The
1003 @code{.set nodspr2} directive prevents DSP Release 2 instructions from
1006 @cindex MIPS MT instruction generation override
1007 @kindex @code{.set mt}
1008 @kindex @code{.set nomt}
1009 The directive @code{.set mt} makes the assembler accept instructions
1010 from the MT Application Specific Extension from that point on
1011 in the assembly. The @code{.set nomt} directive prevents MT
1012 instructions from being accepted.
1014 @cindex MIPS MCU instruction generation override
1015 @kindex @code{.set mcu}
1016 @kindex @code{.set nomcu}
1017 The directive @code{.set mcu} makes the assembler accept instructions
1018 from the MCU Application Specific Extension from that point on
1019 in the assembly. The @code{.set nomcu} directive prevents MCU
1020 instructions from being accepted.
1022 @cindex MIPS SIMD Architecture instruction generation override
1023 @kindex @code{.set msa}
1024 @kindex @code{.set nomsa}
1025 The directive @code{.set msa} makes the assembler accept instructions
1026 from the MIPS SIMD Architecture Extension from that point on
1027 in the assembly. The @code{.set nomsa} directive prevents MSA
1028 instructions from being accepted.
1030 @cindex Virtualization instruction generation override
1031 @kindex @code{.set virt}
1032 @kindex @code{.set novirt}
1033 The directive @code{.set virt} makes the assembler accept instructions
1034 from the Virtualization Application Specific Extension from that point
1035 on in the assembly. The @code{.set novirt} directive prevents Virtualization
1036 instructions from being accepted.
1038 @cindex MIPS eXtended Physical Address (XPA) instruction generation override
1039 @kindex @code{.set xpa}
1040 @kindex @code{.set noxpa}
1041 The directive @code{.set xpa} makes the assembler accept instructions
1042 from the XPA Extension from that point on in the assembly. The
1043 @code{.set noxpa} directive prevents XPA instructions from being accepted.
1045 Traditional MIPS assemblers do not support these directives.
1047 @node MIPS Floating-Point
1048 @section Directives to override floating-point options
1050 @cindex Disable floating-point instructions
1051 @kindex @code{.set softfloat}
1052 @kindex @code{.set hardfloat}
1053 The directives @code{.set softfloat} and @code{.set hardfloat} provide
1054 finer control of disabling and enabling float-point instructions.
1055 These directives always override the default (that hard-float
1056 instructions are accepted) or the command-line options
1057 (@samp{-msoft-float} and @samp{-mhard-float}).
1059 @cindex Disable single-precision floating-point operations
1060 @kindex @code{.set singlefloat}
1061 @kindex @code{.set doublefloat}
1062 The directives @code{.set singlefloat} and @code{.set doublefloat}
1063 provide finer control of disabling and enabling double-precision
1064 float-point operations. These directives always override the default
1065 (that double-precision operations are accepted) or the command-line
1066 options (@samp{-msingle-float} and @samp{-mdouble-float}).
1068 Traditional MIPS assemblers do not support these directives.
1071 @section Syntactical considerations for the MIPS assembler
1073 * MIPS-Chars:: Special Characters
1077 @subsection Special Characters
1079 @cindex line comment character, MIPS
1080 @cindex MIPS line comment character
1081 The presence of a @samp{#} on a line indicates the start of a comment
1082 that extends to the end of the current line.
1084 If a @samp{#} appears as the first character of a line, the whole line
1085 is treated as a comment, but in this case the line can also be a
1086 logical line number directive (@pxref{Comments}) or a
1087 preprocessor control command (@pxref{Preprocessing}).
1089 @cindex line separator, MIPS
1090 @cindex statement separator, MIPS
1091 @cindex MIPS line separator
1092 The @samp{;} character can be used to separate statements on the same