1 @c Copyright (C) 1991-2016 Free Software Foundation, Inc.
2 @c This is part of the GAS manual.
3 @c For copying conditions, see the file as.texinfo.
7 @chapter MIPS Dependent Features
10 @node Machine Dependencies
11 @chapter MIPS Dependent Features
14 @cindex MIPS processor
15 @sc{gnu} @code{@value{AS}} for MIPS architectures supports several
16 different MIPS processors, and MIPS ISA levels I through V, MIPS32,
17 and MIPS64. For information about the MIPS instruction set, see
18 @cite{MIPS RISC Architecture}, by Kane and Heindrich (Prentice-Hall).
19 For an overview of MIPS assembly conventions, see ``Appendix D:
20 Assembly Language Programming'' in the same work.
23 * MIPS Options:: Assembler options
24 * MIPS Macros:: High-level assembly macros
25 * MIPS Symbol Sizes:: Directives to override the size of symbols
26 * MIPS Small Data:: Controlling the use of small data accesses
27 * MIPS ISA:: Directives to override the ISA level
28 * MIPS assembly options:: Directives to control code generation
29 * MIPS autoextend:: Directives for extending MIPS 16 bit instructions
30 * MIPS insn:: Directive to mark data as an instruction
31 * MIPS FP ABIs:: Marking which FP ABI is in use
32 * MIPS NaN Encodings:: Directives to record which NaN encoding is being used
33 * MIPS Option Stack:: Directives to save and restore options
34 * MIPS ASE Instruction Generation Overrides:: Directives to control
35 generation of MIPS ASE instructions
36 * MIPS Floating-Point:: Directives to override floating-point options
37 * MIPS Syntax:: MIPS specific syntactical considerations
41 @section Assembler options
43 The MIPS configurations of @sc{gnu} @code{@value{AS}} support these
47 @cindex @code{-G} option (MIPS)
49 Set the ``small data'' limit to @var{n} bytes. The default limit is 8 bytes.
50 @xref{MIPS Small Data,, Controlling the use of small data accesses}.
52 @cindex @code{-EB} option (MIPS)
53 @cindex @code{-EL} option (MIPS)
54 @cindex MIPS big-endian output
55 @cindex MIPS little-endian output
56 @cindex big-endian output, MIPS
57 @cindex little-endian output, MIPS
60 Any MIPS configuration of @code{@value{AS}} can select big-endian or
61 little-endian output at run time (unlike the other @sc{gnu} development
62 tools, which must be configured for one or the other). Use @samp{-EB}
63 to select big-endian output, and @samp{-EL} for little-endian.
66 @cindex PIC selection, MIPS
67 @cindex @option{-KPIC} option, MIPS
68 Generate SVR4-style PIC. This option tells the assembler to generate
69 SVR4-style position-independent macro expansions. It also tells the
70 assembler to mark the output file as PIC.
73 @cindex @option{-mvxworks-pic} option, MIPS
74 Generate VxWorks PIC. This option tells the assembler to generate
75 VxWorks-style position-independent macro expansions.
77 @cindex MIPS architecture options
93 Generate code for a particular MIPS Instruction Set Architecture level.
94 @samp{-mips1} corresponds to the R2000 and R3000 processors,
95 @samp{-mips2} to the R6000 processor, @samp{-mips3} to the
96 R4000 processor, and @samp{-mips4} to the R8000 and R10000 processors.
97 @samp{-mips5}, @samp{-mips32}, @samp{-mips32r2}, @samp{-mips32r3},
98 @samp{-mips32r5}, @samp{-mips32r6}, @samp{-mips64}, @samp{-mips64r2},
99 @samp{-mips64r3}, @samp{-mips64r5}, and @samp{-mips64r6} correspond to
100 generic MIPS V, MIPS32, MIPS32 Release 2, MIPS32 Release 3, MIPS32
101 Release 5, MIPS32 Release 6, MIPS64, and MIPS64 Release 2, MIPS64
102 Release 3, MIPS64 Release 5, and MIPS64 Release 6 ISA processors,
103 respectively. You can also switch instruction sets during the assembly;
104 see @ref{MIPS ISA, Directives to override the ISA level}.
108 Some macros have different expansions for 32-bit and 64-bit registers.
109 The register sizes are normally inferred from the ISA and ABI, but these
110 flags force a certain group of registers to be treated as 32 bits wide at
111 all times. @samp{-mgp32} controls the size of general-purpose registers
112 and @samp{-mfp32} controls the size of floating-point registers.
114 The @code{.set gp=32} and @code{.set fp=32} directives allow the size
115 of registers to be changed for parts of an object. The default value is
116 restored by @code{.set gp=default} and @code{.set fp=default}.
118 On some MIPS variants there is a 32-bit mode flag; when this flag is
119 set, 64-bit instructions generate a trap. Also, some 32-bit OSes only
120 save the 32-bit registers on a context switch, so it is essential never
121 to use the 64-bit registers.
125 Assume that 64-bit registers are available. This is provided in the
126 interests of symmetry with @samp{-mgp32} and @samp{-mfp32}.
128 The @code{.set gp=64} and @code{.set fp=64} directives allow the size
129 of registers to be changed for parts of an object. The default value is
130 restored by @code{.set gp=default} and @code{.set fp=default}.
133 Make no assumptions about whether 32-bit or 64-bit floating-point
134 registers are available. This is provided to support having modules
135 compatible with either @samp{-mfp32} or @samp{-mfp64}. This option can
136 only be used with MIPS II and above.
138 The @code{.set fp=xx} directive allows a part of an object to be marked
139 as not making assumptions about 32-bit or 64-bit FP registers. The
140 default value is restored by @code{.set fp=default}.
143 @itemx -mno-odd-spreg
144 Enable use of floating-point operations on odd-numbered single-precision
145 registers when supported by the ISA. @samp{-mfpxx} implies
146 @samp{-mno-odd-spreg}, otherwise the default is @samp{-modd-spreg}
150 Generate code for the MIPS 16 processor. This is equivalent to putting
151 @code{.set mips16} at the start of the assembly file. @samp{-no-mips16}
152 turns off this option.
155 @itemx -mno-micromips
156 Generate code for the microMIPS processor. This is equivalent to putting
157 @code{.set micromips} at the start of the assembly file. @samp{-mno-micromips}
158 turns off this option. This is equivalent to putting @code{.set nomicromips}
159 at the start of the assembly file.
162 @itemx -mno-smartmips
163 Enables the SmartMIPS extensions to the MIPS32 instruction set, which
164 provides a number of new instructions which target smartcard and
165 cryptographic applications. This is equivalent to putting
166 @code{.set smartmips} at the start of the assembly file.
167 @samp{-mno-smartmips} turns off this option.
171 Generate code for the MIPS-3D Application Specific Extension.
172 This tells the assembler to accept MIPS-3D instructions.
173 @samp{-no-mips3d} turns off this option.
177 Generate code for the MDMX Application Specific Extension.
178 This tells the assembler to accept MDMX instructions.
179 @samp{-no-mdmx} turns off this option.
183 Generate code for the DSP Release 1 Application Specific Extension.
184 This tells the assembler to accept DSP Release 1 instructions.
185 @samp{-mno-dsp} turns off this option.
189 Generate code for the DSP Release 2 Application Specific Extension.
190 This option implies @samp{-mdsp}.
191 This tells the assembler to accept DSP Release 2 instructions.
192 @samp{-mno-dspr2} turns off this option.
196 Generate code for the DSP Release 3 Application Specific Extension.
197 This option implies @samp{-mdsp} and @samp{-mdspr2}.
198 This tells the assembler to accept DSP Release 3 instructions.
199 @samp{-mno-dspr3} turns off this option.
203 Generate code for the MT Application Specific Extension.
204 This tells the assembler to accept MT instructions.
205 @samp{-mno-mt} turns off this option.
209 Generate code for the MCU Application Specific Extension.
210 This tells the assembler to accept MCU instructions.
211 @samp{-mno-mcu} turns off this option.
215 Generate code for the MIPS SIMD Architecture Extension.
216 This tells the assembler to accept MSA instructions.
217 @samp{-mno-msa} turns off this option.
221 Generate code for the MIPS eXtended Physical Address (XPA) Extension.
222 This tells the assembler to accept XPA instructions.
223 @samp{-mno-xpa} turns off this option.
227 Generate code for the Virtualization Application Specific Extension.
228 This tells the assembler to accept Virtualization instructions.
229 @samp{-mno-virt} turns off this option.
233 Only use 32-bit instruction encodings when generating code for the
234 microMIPS processor. This option inhibits the use of any 16-bit
235 instructions. This is equivalent to putting @code{.set insn32} at
236 the start of the assembly file. @samp{-mno-insn32} turns off this
237 option. This is equivalent to putting @code{.set noinsn32} at the
238 start of the assembly file. By default @samp{-mno-insn32} is
239 selected, allowing all instructions to be used.
243 Cause nops to be inserted if the read of the destination register
244 of an mfhi or mflo instruction occurs in the following two instructions.
247 @itemx -mno-fix-rm7000
248 Cause nops to be inserted if a dmult or dmultu instruction is
249 followed by a load instruction.
251 @item -mfix-loongson2f-jump
252 @itemx -mno-fix-loongson2f-jump
253 Eliminate instruction fetch from outside 256M region to work around the
254 Loongson2F @samp{jump} instructions. Without it, under extreme cases,
255 the kernel may crash. The issue has been solved in latest processor
256 batches, but this fix has no side effect to them.
258 @item -mfix-loongson2f-nop
259 @itemx -mno-fix-loongson2f-nop
260 Replace nops by @code{or at,at,zero} to work around the Loongson2F
261 @samp{nop} errata. Without it, under extreme cases, the CPU might
262 deadlock. The issue has been solved in later Loongson2F batches, but
263 this fix has no side effect to them.
266 @itemx -mno-fix-vr4120
267 Insert nops to work around certain VR4120 errata. This option is
268 intended to be used on GCC-generated code: it is not designed to catch
269 all problems in hand-written assembler code.
272 @itemx -mno-fix-vr4130
273 Insert nops to work around the VR4130 @samp{mflo}/@samp{mfhi} errata.
277 Insert nops to work around the 24K @samp{eret}/@samp{deret} errata.
280 @itemx -mno-fix-cn63xxp1
281 Replace @code{pref} hints 0 - 4 and 6 - 24 with hint 28 to work around
282 certain CN63XXP1 errata.
286 Generate code for the LSI R4010 chip. This tells the assembler to
287 accept the R4010-specific instructions (@samp{addciu}, @samp{ffc},
288 etc.), and to not schedule @samp{nop} instructions around accesses to
289 the @samp{HI} and @samp{LO} registers. @samp{-no-m4010} turns off this
294 Generate code for the MIPS R4650 chip. This tells the assembler to accept
295 the @samp{mad} and @samp{madu} instruction, and to not schedule @samp{nop}
296 instructions around accesses to the @samp{HI} and @samp{LO} registers.
297 @samp{-no-m4650} turns off this option.
303 For each option @samp{-m@var{nnnn}}, generate code for the MIPS
304 R@var{nnnn} chip. This tells the assembler to accept instructions
305 specific to that chip, and to schedule for that chip's hazards.
307 @item -march=@var{cpu}
308 Generate code for a particular MIPS CPU. It is exactly equivalent to
309 @samp{-m@var{cpu}}, except that there are more value of @var{cpu}
310 understood. Valid @var{cpu} value are:
401 For compatibility reasons, @samp{@var{n}x} and @samp{@var{b}fx} are
402 accepted as synonyms for @samp{@var{n}f1_1}. These values are
405 @item -mtune=@var{cpu}
406 Schedule and tune for a particular MIPS CPU. Valid @var{cpu} values are
407 identical to @samp{-march=@var{cpu}}.
409 @item -mabi=@var{abi}
410 Record which ABI the source code uses. The recognized arguments
411 are: @samp{32}, @samp{n32}, @samp{o64}, @samp{64} and @samp{eabi}.
417 Equivalent to adding @code{.set sym32} or @code{.set nosym32} to
418 the beginning of the assembler input. @xref{MIPS Symbol Sizes}.
420 @cindex @code{-nocpp} ignored (MIPS)
422 This option is ignored. It is accepted for command-line compatibility with
423 other assemblers, which use it to turn off C style preprocessing. With
424 @sc{gnu} @code{@value{AS}}, there is no need for @samp{-nocpp}, because the
425 @sc{gnu} assembler itself never runs the C preprocessor.
429 Disable or enable floating-point instructions. Note that by default
430 floating-point instructions are always allowed even with CPU targets
431 that don't have support for these instructions.
434 @itemx -mdouble-float
435 Disable or enable double-precision floating-point operations. Note
436 that by default double-precision floating-point operations are always
437 allowed even with CPU targets that don't have support for these
440 @item --construct-floats
441 @itemx --no-construct-floats
442 The @code{--no-construct-floats} option disables the construction of
443 double width floating point constants by loading the two halves of the
444 value into the two single width floating point registers that make up
445 the double width register. This feature is useful if the processor
446 support the FR bit in its status register, and this bit is known (by
447 the programmer) to be set. This bit prevents the aliasing of the double
448 width register by the single width registers.
450 By default @code{--construct-floats} is selected, allowing construction
451 of these floating point constants.
454 @itemx --no-relax-branch
455 The @samp{--relax-branch} option enables the relaxation of out-of-range
456 branches. Any branches whose target cannot be reached directly are
457 converted to a small instruction sequence including an inverse-condition
458 branch to the physically next instruction, and a jump to the original
459 target is inserted between the two instructions. In PIC code the jump
460 will involve further instructions for address calculation.
462 The @code{BC1ANY2F}, @code{BC1ANY2T}, @code{BC1ANY4F}, @code{BC1ANY4T},
463 @code{BPOSGE32} and @code{BPOSGE64} instructions are excluded from
464 relaxation, because they have no complementing counterparts. They could
465 be relaxed with the use of a longer sequence involving another branch,
466 however this has not been implemented and if their target turns out of
467 reach, they produce an error even if branch relaxation is enabled.
469 Also no MIPS16 branches are ever relaxed.
471 By default @samp{--no-relax-branch} is selected, causing any out-of-range
472 branches to produce an error.
474 @cindex @option{-mnan=} command line option, MIPS
475 @item -mnan=@var{encoding}
476 This option indicates whether the source code uses the IEEE 2008
477 NaN encoding (@option{-mnan=2008}) or the original MIPS encoding
478 (@option{-mnan=legacy}). It is equivalent to adding a @code{.nan}
479 directive to the beginning of the source file. @xref{MIPS NaN Encodings}.
481 @option{-mnan=legacy} is the default if no @option{-mnan} option or
482 @code{.nan} directive is used.
486 @c FIXME! (1) reflect these options (next item too) in option summaries;
487 @c (2) stop teasing, say _which_ instructions expanded _how_.
488 @code{@value{AS}} automatically macro expands certain division and
489 multiplication instructions to check for overflow and division by zero. This
490 option causes @code{@value{AS}} to generate code to take a trap exception
491 rather than a break exception when an error is detected. The trap instructions
492 are only supported at Instruction Set Architecture level 2 and higher.
496 Generate code to take a break exception rather than a trap exception when an
497 error is detected. This is the default.
501 Control generation of @code{.pdr} sections. Off by default on IRIX, on
506 When generating code using the Unix calling conventions (selected by
507 @samp{-KPIC} or @samp{-mcall_shared}), gas will normally generate code
508 which can go into a shared library. The @samp{-mno-shared} option
509 tells gas to generate code which uses the calling convention, but can
510 not go into a shared library. The resulting code is slightly more
511 efficient. This option only affects the handling of the
512 @samp{.cpload} and @samp{.cpsetup} pseudo-ops.
516 @section High-level assembly macros
518 MIPS assemblers have traditionally provided a wider range of
519 instructions than the MIPS architecture itself. These extra
520 instructions are usually referred to as ``macro'' instructions
521 @footnote{The term ``macro'' is somewhat overloaded here, since
522 these macros have no relation to those defined by @code{.macro},
523 @pxref{Macro,, @code{.macro}}.}.
525 Some MIPS macro instructions extend an underlying architectural instruction
526 while others are entirely new. An example of the former type is @code{and},
527 which allows the third operand to be either a register or an arbitrary
528 immediate value. Examples of the latter type include @code{bgt}, which
529 branches to the third operand when the first operand is greater than
530 the second operand, and @code{ulh}, which implements an unaligned
533 One of the most common extensions provided by macros is to expand
534 memory offsets to the full address range (32 or 64 bits) and to allow
535 symbolic offsets such as @samp{my_data + 4} to be used in place of
536 integer constants. For example, the architectural instruction
537 @code{lbu} allows only a signed 16-bit offset, whereas the macro
538 @code{lbu} allows code such as @samp{lbu $4,array+32769($5)}.
539 The implementation of these symbolic offsets depends on several factors,
540 such as whether the assembler is generating SVR4-style PIC (selected by
541 @option{-KPIC}, @pxref{MIPS Options,, Assembler options}), the size of symbols
542 (@pxref{MIPS Symbol Sizes,, Directives to override the size of symbols}),
543 and the small data limit (@pxref{MIPS Small Data,, Controlling the use
544 of small data accesses}).
546 @kindex @code{.set macro}
547 @kindex @code{.set nomacro}
548 Sometimes it is undesirable to have one assembly instruction expand
549 to several machine instructions. The directive @code{.set nomacro}
550 tells the assembler to warn when this happens. @code{.set macro}
551 restores the default behavior.
553 @cindex @code{at} register, MIPS
554 @kindex @code{.set at=@var{reg}}
555 Some macro instructions need a temporary register to store intermediate
556 results. This register is usually @code{$1}, also known as @code{$at},
557 but it can be changed to any core register @var{reg} using
558 @code{.set at=@var{reg}}. Note that @code{$at} always refers
559 to @code{$1} regardless of which register is being used as the
562 @kindex @code{.set at}
563 @kindex @code{.set noat}
564 Implicit uses of the temporary register in macros could interfere with
565 explicit uses in the assembly code. The assembler therefore warns
566 whenever it sees an explicit use of the temporary register. The directive
567 @code{.set noat} silences this warning while @code{.set at} restores
568 the default behavior. It is safe to use @code{.set noat} while
569 @code{.set nomacro} is in effect since single-instruction macros
570 never need a temporary register.
572 Note that while the @sc{gnu} assembler provides these macros for compatibility,
573 it does not make any attempt to optimize them with the surrounding code.
575 @node MIPS Symbol Sizes
576 @section Directives to override the size of symbols
578 @kindex @code{.set sym32}
579 @kindex @code{.set nosym32}
580 The n64 ABI allows symbols to have any 64-bit value. Although this
581 provides a great deal of flexibility, it means that some macros have
582 much longer expansions than their 32-bit counterparts. For example,
583 the non-PIC expansion of @samp{dla $4,sym} is usually:
588 daddiu $4,$4,%higher(sym)
589 daddiu $1,$1,%lo(sym)
594 whereas the 32-bit expansion is simply:
598 daddiu $4,$4,%lo(sym)
601 n64 code is sometimes constructed in such a way that all symbolic
602 constants are known to have 32-bit values, and in such cases, it's
603 preferable to use the 32-bit expansion instead of the 64-bit
606 You can use the @code{.set sym32} directive to tell the assembler
607 that, from this point on, all expressions of the form
608 @samp{@var{symbol}} or @samp{@var{symbol} + @var{offset}}
609 have 32-bit values. For example:
618 will cause the assembler to treat @samp{sym}, @code{sym+16} and
619 @code{sym+0x8000} as 32-bit values. The handling of non-symbolic
620 addresses is not affected.
622 The directive @code{.set nosym32} ends a @code{.set sym32} block and
623 reverts to the normal behavior. It is also possible to change the
624 symbol size using the command-line options @option{-msym32} and
627 These options and directives are always accepted, but at present,
628 they have no effect for anything other than n64.
630 @node MIPS Small Data
631 @section Controlling the use of small data accesses
633 @c This section deliberately glosses over the possibility of using -G
634 @c in SVR4-style PIC, as could be done on IRIX. We don't support that.
635 @cindex small data, MIPS
636 @cindex @code{gp} register, MIPS
637 It often takes several instructions to load the address of a symbol.
638 For example, when @samp{addr} is a 32-bit symbol, the non-PIC expansion
639 of @samp{dla $4,addr} is usually:
643 daddiu $4,$4,%lo(addr)
646 The sequence is much longer when @samp{addr} is a 64-bit symbol.
647 @xref{MIPS Symbol Sizes,, Directives to override the size of symbols}.
649 In order to cut down on this overhead, most embedded MIPS systems
650 set aside a 64-kilobyte ``small data'' area and guarantee that all
651 data of size @var{n} and smaller will be placed in that area.
652 The limit @var{n} is passed to both the assembler and the linker
653 using the command-line option @option{-G @var{n}}, @pxref{MIPS Options,,
654 Assembler options}. Note that the same value of @var{n} must be used
655 when linking and when assembling all input files to the link; any
656 inconsistency could cause a relocation overflow error.
658 The size of an object in the @code{.bss} section is set by the
659 @code{.comm} or @code{.lcomm} directive that defines it. The size of
660 an external object may be set with the @code{.extern} directive. For
661 example, @samp{.extern sym,4} declares that the object at @code{sym}
662 is 4 bytes in length, while leaving @code{sym} otherwise undefined.
664 When no @option{-G} option is given, the default limit is 8 bytes.
665 The option @option{-G 0} prevents any data from being automatically
668 It is also possible to mark specific objects as small by putting them
669 in the special sections @code{.sdata} and @code{.sbss}, which are
670 ``small'' counterparts of @code{.data} and @code{.bss} respectively.
671 The toolchain will treat such data as small regardless of the
674 On startup, systems that support a small data area are expected to
675 initialize register @code{$28}, also known as @code{$gp}, in such a
676 way that small data can be accessed using a 16-bit offset from that
677 register. For example, when @samp{addr} is small data,
678 the @samp{dla $4,addr} instruction above is equivalent to:
681 daddiu $4,$28,%gp_rel(addr)
684 Small data is not supported for SVR4-style PIC.
687 @section Directives to override the ISA level
689 @cindex MIPS ISA override
690 @kindex @code{.set mips@var{n}}
691 @sc{gnu} @code{@value{AS}} supports an additional directive to change
692 the MIPS Instruction Set Architecture level on the fly: @code{.set
693 mips@var{n}}. @var{n} should be a number from 0 to 5, or 32, 32r2, 32r3,
694 32r5, 32r6, 64, 64r2, 64r3, 64r5 or 64r6.
695 The values other than 0 make the assembler accept instructions
696 for the corresponding ISA level, from that point on in the
697 assembly. @code{.set mips@var{n}} affects not only which instructions
698 are permitted, but also how certain macros are expanded. @code{.set
699 mips0} restores the ISA level to its original level: either the
700 level you selected with command line options, or the default for your
701 configuration. You can use this feature to permit specific MIPS III
702 instructions while assembling in 32 bit mode. Use this directive with
705 @cindex MIPS CPU override
706 @kindex @code{.set arch=@var{cpu}}
707 The @code{.set arch=@var{cpu}} directive provides even finer control.
708 It changes the effective CPU target and allows the assembler to use
709 instructions specific to a particular CPU. All CPUs supported by the
710 @samp{-march} command line option are also selectable by this directive.
711 The original value is restored by @code{.set arch=default}.
713 The directive @code{.set mips16} puts the assembler into MIPS 16 mode,
714 in which it will assemble instructions for the MIPS 16 processor. Use
715 @code{.set nomips16} to return to normal 32 bit mode.
717 Traditional MIPS assemblers do not support this directive.
719 The directive @code{.set micromips} puts the assembler into microMIPS mode,
720 in which it will assemble instructions for the microMIPS processor. Use
721 @code{.set nomicromips} to return to normal 32 bit mode.
723 Traditional MIPS assemblers do not support this directive.
725 @node MIPS assembly options
726 @section Directives to control code generation
728 @cindex MIPS directives to override command line options
729 @kindex @code{.module}
730 The @code{.module} directive allows command line options to be set directly
731 from assembly. The format of the directive matches the @code{.set}
732 directive but only those options which are relevant to a whole module are
733 supported. The effect of a @code{.module} directive is the same as the
734 corresponding command line option. Where @code{.set} directives support
735 returning to a default then the @code{.module} directives do not as they
738 These module-level directives must appear first in assembly.
740 Traditional MIPS assemblers do not support this directive.
742 @cindex MIPS 32-bit microMIPS instruction generation override
743 @kindex @code{.set insn32}
744 @kindex @code{.set noinsn32}
745 The directive @code{.set insn32} makes the assembler only use 32-bit
746 instruction encodings when generating code for the microMIPS processor.
747 This directive inhibits the use of any 16-bit instructions from that
748 point on in the assembly. The @code{.set noinsn32} directive allows
749 16-bit instructions to be accepted.
751 Traditional MIPS assemblers do not support this directive.
753 @node MIPS autoextend
754 @section Directives for extending MIPS 16 bit instructions
756 @kindex @code{.set autoextend}
757 @kindex @code{.set noautoextend}
758 By default, MIPS 16 instructions are automatically extended to 32 bits
759 when necessary. The directive @code{.set noautoextend} will turn this
760 off. When @code{.set noautoextend} is in effect, any 32 bit instruction
761 must be explicitly extended with the @code{.e} modifier (e.g.,
762 @code{li.e $4,1000}). The directive @code{.set autoextend} may be used
763 to once again automatically extend instructions when necessary.
765 This directive is only meaningful when in MIPS 16 mode. Traditional
766 MIPS assemblers do not support this directive.
769 @section Directive to mark data as an instruction
772 The @code{.insn} directive tells @code{@value{AS}} that the following
773 data is actually instructions. This makes a difference in MIPS 16 and
774 microMIPS modes: when loading the address of a label which precedes
775 instructions, @code{@value{AS}} automatically adds 1 to the value, so
776 that jumping to the loaded address will do the right thing.
778 @kindex @code{.global}
779 The @code{.global} and @code{.globl} directives supported by
780 @code{@value{AS}} will by default mark the symbol as pointing to a
781 region of data not code. This means that, for example, any
782 instructions following such a symbol will not be disassembled by
783 @code{objdump} as it will regard them as data. To change this
784 behavior an optional section name can be placed after the symbol name
785 in the @code{.global} directive. If this section exists and is known
786 to be a code section, then the symbol will be marked as pointing at
787 code not data. Ie the syntax for the directive is:
789 @code{.global @var{symbol}[ @var{section}][, @var{symbol}[ @var{section}]] ...},
791 Here is a short example:
794 .global foo .text, bar, baz .data
805 @section Directives to control the FP ABI
807 * MIPS FP ABI History:: History of FP ABIs
808 * MIPS FP ABI Variants:: Supported FP ABIs
809 * MIPS FP ABI Selection:: Automatic selection of FP ABI
810 * MIPS FP ABI Compatibility:: Linking different FP ABI variants
813 @node MIPS FP ABI History
814 @subsection History of FP ABIs
815 @cindex @code{.gnu_attribute 4, @var{n}} directive, MIPS
816 @cindex @code{.gnu_attribute Tag_GNU_MIPS_ABI_FP, @var{n}} directive, MIPS
817 The MIPS ABIs support a variety of different floating-point extensions
818 where calling-convention and register sizes vary for floating-point data.
819 The extensions exist to support a wide variety of optional architecture
820 features. The resulting ABI variants are generally incompatible with each
821 other and must be tracked carefully.
823 Traditionally the use of an explicit @code{.gnu_attribute 4, @var{n}}
824 directive is used to indicate which ABI is in use by a specific module.
825 It was then left to the user to ensure that command line options and the
826 selected ABI were compatible with some potential for inconsistencies.
828 @node MIPS FP ABI Variants
829 @subsection Supported FP ABIs
830 The supported floating-point ABI variants are:
833 @item 0 - No floating-point
834 This variant is used to indicate that floating-point is not used within
835 the module at all and therefore has no impact on the ABI. This is the
838 @item 1 - Double-precision
839 This variant indicates that double-precision support is used. For 64-bit
840 ABIs this means that 64-bit wide floating-point registers are required.
841 For 32-bit ABIs this means that 32-bit wide floating-point registers are
842 required and double-precision operations use pairs of registers.
844 @item 2 - Single-precision
845 This variant indicates that single-precision support is used. Double
846 precision operations will be supported via soft-float routines.
849 This variant indicates that although floating-point support is used all
850 operations are emulated in software. This means the ABI is modified to
851 pass all floating-point data in general-purpose registers.
854 This variant existed as an initial attempt at supporting 64-bit wide
855 floating-point registers for O32 ABI on a MIPS32r2 CPU. This has been
856 superseded by 5, 6 and 7.
858 @item 5 - Double-precision 32-bit CPU, 32-bit or 64-bit FPU
859 This variant is used by 32-bit ABIs to indicate that the floating-point
860 code in the module has been designed to operate correctly with either
861 32-bit wide or 64-bit wide floating-point registers. Double-precision
862 support is used. Only O32 currently supports this variant and requires
863 a minimum architecture of MIPS II.
865 @item 6 - Double-precision 32-bit FPU, 64-bit FPU
866 This variant is used by 32-bit ABIs to indicate that the floating-point
867 code in the module requires 64-bit wide floating-point registers.
868 Double-precision support is used. Only O32 currently supports this
869 variant and requires a minimum architecture of MIPS32r2.
871 @item 7 - Double-precision compat 32-bit FPU, 64-bit FPU
872 This variant is used by 32-bit ABIs to indicate that the floating-point
873 code in the module requires 64-bit wide floating-point registers.
874 Double-precision support is used. This differs from the previous ABI
875 as it restricts use of odd-numbered single-precision registers. Only
876 O32 currently supports this variant and requires a minimum architecture
880 @node MIPS FP ABI Selection
881 @subsection Automatic selection of FP ABI
882 @cindex @code{.module fp=@var{nn}} directive, MIPS
883 In order to simplify and add safety to the process of selecting the
884 correct floating-point ABI, the assembler will automatically infer the
885 correct @code{.gnu_attribute 4, @var{n}} directive based on command line
886 options and @code{.module} overrides. Where an explicit
887 @code{.gnu_attribute 4, @var{n}} directive has been seen then a warning
888 will be raised if it does not match an inferred setting.
890 The floating-point ABI is inferred as follows. If @samp{-msoft-float}
891 has been used the module will be marked as soft-float. If
892 @samp{-msingle-float} has been used then the module will be marked as
893 single-precision. The remaining ABIs are then selected based
894 on the FP register width. Double-precision is selected if the width
895 of GP and FP registers match and the special double-precision variants
896 for 32-bit ABIs are then selected depending on @samp{-mfpxx},
897 @samp{-mfp64} and @samp{-mno-odd-spreg}.
899 @node MIPS FP ABI Compatibility
900 @subsection Linking different FP ABI variants
901 Modules using the default FP ABI (no floating-point) can be linked with
902 any other (singular) FP ABI variant.
904 Special compatibility support exists for O32 with the four
905 double-precision FP ABI variants. The @samp{-mfpxx} FP ABI is specifically
906 designed to be compatible with the standard double-precision ABI and the
907 @samp{-mfp64} FP ABIs. This makes it desirable for O32 modules to be
908 built as @samp{-mfpxx} to ensure the maximum compatibility with other
909 modules produced for more specific needs. The only FP ABIs which cannot
910 be linked together are the standard double-precision ABI and the full
911 @samp{-mfp64} ABI with @samp{-modd-spreg}.
913 @node MIPS NaN Encodings
914 @section Directives to record which NaN encoding is being used
916 @cindex MIPS IEEE 754 NaN data encoding selection
917 @cindex @code{.nan} directive, MIPS
918 The IEEE 754 floating-point standard defines two types of not-a-number
919 (NaN) data: ``signalling'' NaNs and ``quiet'' NaNs. The original version
920 of the standard did not specify how these two types should be
921 distinguished. Most implementations followed the i387 model, in which
922 the first bit of the significand is set for quiet NaNs and clear for
923 signalling NaNs. However, the original MIPS implementation assigned the
924 opposite meaning to the bit, so that it was set for signalling NaNs and
925 clear for quiet NaNs.
927 The 2008 revision of the standard formally suggested the i387 choice
928 and as from Sep 2012 the current release of the MIPS architecture
929 therefore optionally supports that form. Code that uses one NaN encoding
930 would usually be incompatible with code that uses the other NaN encoding,
931 so MIPS ELF objects have a flag (@code{EF_MIPS_NAN2008}) to record which
932 encoding is being used.
934 Assembly files can use the @code{.nan} directive to select between the
935 two encodings. @samp{.nan 2008} says that the assembly file uses the
936 IEEE 754-2008 encoding while @samp{.nan legacy} says that the file uses
937 the original MIPS encoding. If several @code{.nan} directives are given,
938 the final setting is the one that is used.
940 The command-line options @option{-mnan=legacy} and @option{-mnan=2008}
941 can be used instead of @samp{.nan legacy} and @samp{.nan 2008}
942 respectively. However, any @code{.nan} directive overrides the
943 command-line setting.
945 @samp{.nan legacy} is the default if no @code{.nan} directive or
946 @option{-mnan} option is given.
948 Note that @sc{gnu} @code{@value{AS}} does not produce NaNs itself and
949 therefore these directives do not affect code generation. They simply
950 control the setting of the @code{EF_MIPS_NAN2008} flag.
952 Traditional MIPS assemblers do not support these directives.
954 @node MIPS Option Stack
955 @section Directives to save and restore options
957 @cindex MIPS option stack
958 @kindex @code{.set push}
959 @kindex @code{.set pop}
960 The directives @code{.set push} and @code{.set pop} may be used to save
961 and restore the current settings for all the options which are
962 controlled by @code{.set}. The @code{.set push} directive saves the
963 current settings on a stack. The @code{.set pop} directive pops the
964 stack and restores the settings.
966 These directives can be useful inside an macro which must change an
967 option such as the ISA level or instruction reordering but does not want
968 to change the state of the code which invoked the macro.
970 Traditional MIPS assemblers do not support these directives.
972 @node MIPS ASE Instruction Generation Overrides
973 @section Directives to control generation of MIPS ASE instructions
975 @cindex MIPS MIPS-3D instruction generation override
976 @kindex @code{.set mips3d}
977 @kindex @code{.set nomips3d}
978 The directive @code{.set mips3d} makes the assembler accept instructions
979 from the MIPS-3D Application Specific Extension from that point on
980 in the assembly. The @code{.set nomips3d} directive prevents MIPS-3D
981 instructions from being accepted.
983 @cindex SmartMIPS instruction generation override
984 @kindex @code{.set smartmips}
985 @kindex @code{.set nosmartmips}
986 The directive @code{.set smartmips} makes the assembler accept
987 instructions from the SmartMIPS Application Specific Extension to the
988 MIPS32 ISA from that point on in the assembly. The
989 @code{.set nosmartmips} directive prevents SmartMIPS instructions from
992 @cindex MIPS MDMX instruction generation override
993 @kindex @code{.set mdmx}
994 @kindex @code{.set nomdmx}
995 The directive @code{.set mdmx} makes the assembler accept instructions
996 from the MDMX Application Specific Extension from that point on
997 in the assembly. The @code{.set nomdmx} directive prevents MDMX
998 instructions from being accepted.
1000 @cindex MIPS DSP Release 1 instruction generation override
1001 @kindex @code{.set dsp}
1002 @kindex @code{.set nodsp}
1003 The directive @code{.set dsp} makes the assembler accept instructions
1004 from the DSP Release 1 Application Specific Extension from that point
1005 on in the assembly. The @code{.set nodsp} directive prevents DSP
1006 Release 1 instructions from being accepted.
1008 @cindex MIPS DSP Release 2 instruction generation override
1009 @kindex @code{.set dspr2}
1010 @kindex @code{.set nodspr2}
1011 The directive @code{.set dspr2} makes the assembler accept instructions
1012 from the DSP Release 2 Application Specific Extension from that point
1013 on in the assembly. This directive implies @code{.set dsp}. The
1014 @code{.set nodspr2} directive prevents DSP Release 2 instructions from
1017 @cindex MIPS DSP Release 3 instruction generation override
1018 @kindex @code{.set dspr3}
1019 @kindex @code{.set nodspr3}
1020 The directive @code{.set dspr3} makes the assembler accept instructions
1021 from the DSP Release 3 Application Specific Extension from that point
1022 on in the assembly. This directive implies @code{.set dsp} and
1023 @code{.set dspr2}. The @code{.set nodspr3} directive prevents DSP
1024 Release 3 instructions from being accepted.
1026 @cindex MIPS MT instruction generation override
1027 @kindex @code{.set mt}
1028 @kindex @code{.set nomt}
1029 The directive @code{.set mt} makes the assembler accept instructions
1030 from the MT Application Specific Extension from that point on
1031 in the assembly. The @code{.set nomt} directive prevents MT
1032 instructions from being accepted.
1034 @cindex MIPS MCU instruction generation override
1035 @kindex @code{.set mcu}
1036 @kindex @code{.set nomcu}
1037 The directive @code{.set mcu} makes the assembler accept instructions
1038 from the MCU Application Specific Extension from that point on
1039 in the assembly. The @code{.set nomcu} directive prevents MCU
1040 instructions from being accepted.
1042 @cindex MIPS SIMD Architecture instruction generation override
1043 @kindex @code{.set msa}
1044 @kindex @code{.set nomsa}
1045 The directive @code{.set msa} makes the assembler accept instructions
1046 from the MIPS SIMD Architecture Extension from that point on
1047 in the assembly. The @code{.set nomsa} directive prevents MSA
1048 instructions from being accepted.
1050 @cindex Virtualization instruction generation override
1051 @kindex @code{.set virt}
1052 @kindex @code{.set novirt}
1053 The directive @code{.set virt} makes the assembler accept instructions
1054 from the Virtualization Application Specific Extension from that point
1055 on in the assembly. The @code{.set novirt} directive prevents Virtualization
1056 instructions from being accepted.
1058 @cindex MIPS eXtended Physical Address (XPA) instruction generation override
1059 @kindex @code{.set xpa}
1060 @kindex @code{.set noxpa}
1061 The directive @code{.set xpa} makes the assembler accept instructions
1062 from the XPA Extension from that point on in the assembly. The
1063 @code{.set noxpa} directive prevents XPA instructions from being accepted.
1065 Traditional MIPS assemblers do not support these directives.
1067 @node MIPS Floating-Point
1068 @section Directives to override floating-point options
1070 @cindex Disable floating-point instructions
1071 @kindex @code{.set softfloat}
1072 @kindex @code{.set hardfloat}
1073 The directives @code{.set softfloat} and @code{.set hardfloat} provide
1074 finer control of disabling and enabling float-point instructions.
1075 These directives always override the default (that hard-float
1076 instructions are accepted) or the command-line options
1077 (@samp{-msoft-float} and @samp{-mhard-float}).
1079 @cindex Disable single-precision floating-point operations
1080 @kindex @code{.set singlefloat}
1081 @kindex @code{.set doublefloat}
1082 The directives @code{.set singlefloat} and @code{.set doublefloat}
1083 provide finer control of disabling and enabling double-precision
1084 float-point operations. These directives always override the default
1085 (that double-precision operations are accepted) or the command-line
1086 options (@samp{-msingle-float} and @samp{-mdouble-float}).
1088 Traditional MIPS assemblers do not support these directives.
1091 @section Syntactical considerations for the MIPS assembler
1093 * MIPS-Chars:: Special Characters
1097 @subsection Special Characters
1099 @cindex line comment character, MIPS
1100 @cindex MIPS line comment character
1101 The presence of a @samp{#} on a line indicates the start of a comment
1102 that extends to the end of the current line.
1104 If a @samp{#} appears as the first character of a line, the whole line
1105 is treated as a comment, but in this case the line can also be a
1106 logical line number directive (@pxref{Comments}) or a
1107 preprocessor control command (@pxref{Preprocessing}).
1109 @cindex line separator, MIPS
1110 @cindex statement separator, MIPS
1111 @cindex MIPS line separator
1112 The @samp{;} character can be used to separate statements on the same
projects / deliverable / binutils-gdb.git / blob