1 @c Copyright (C) 1991-2018 Free Software Foundation, Inc.
2 @c This is part of the GAS manual.
3 @c For copying conditions, see the file as.texinfo.
7 @chapter MIPS Dependent Features
10 @node Machine Dependencies
11 @chapter MIPS Dependent Features
14 @cindex MIPS processor
15 @sc{gnu} @code{@value{AS}} for MIPS architectures supports several
16 different MIPS processors, and MIPS ISA levels I through V, MIPS32,
17 and MIPS64. For information about the MIPS instruction set, see
18 @cite{MIPS RISC Architecture}, by Kane and Heindrich (Prentice-Hall).
19 For an overview of MIPS assembly conventions, see ``Appendix D:
20 Assembly Language Programming'' in the same work.
23 * MIPS Options:: Assembler options
24 * MIPS Macros:: High-level assembly macros
25 * MIPS Symbol Sizes:: Directives to override the size of symbols
26 * MIPS Small Data:: Controlling the use of small data accesses
27 * MIPS ISA:: Directives to override the ISA level
28 * MIPS assembly options:: Directives to control code generation
29 * MIPS autoextend:: Directives for extending MIPS 16 bit instructions
30 * MIPS insn:: Directive to mark data as an instruction
31 * MIPS FP ABIs:: Marking which FP ABI is in use
32 * MIPS NaN Encodings:: Directives to record which NaN encoding is being used
33 * MIPS Option Stack:: Directives to save and restore options
34 * MIPS ASE Instruction Generation Overrides:: Directives to control
35 generation of MIPS ASE instructions
36 * MIPS Floating-Point:: Directives to override floating-point options
37 * MIPS Syntax:: MIPS specific syntactical considerations
41 @section Assembler options
43 The MIPS configurations of @sc{gnu} @code{@value{AS}} support these
47 @cindex @code{-G} option (MIPS)
49 Set the ``small data'' limit to @var{n} bytes. The default limit is 8 bytes.
50 @xref{MIPS Small Data,, Controlling the use of small data accesses}.
52 @cindex @code{-EB} option (MIPS)
53 @cindex @code{-EL} option (MIPS)
54 @cindex MIPS big-endian output
55 @cindex MIPS little-endian output
56 @cindex big-endian output, MIPS
57 @cindex little-endian output, MIPS
60 Any MIPS configuration of @code{@value{AS}} can select big-endian or
61 little-endian output at run time (unlike the other @sc{gnu} development
62 tools, which must be configured for one or the other). Use @samp{-EB}
63 to select big-endian output, and @samp{-EL} for little-endian.
66 @cindex PIC selection, MIPS
67 @cindex @option{-KPIC} option, MIPS
68 Generate SVR4-style PIC. This option tells the assembler to generate
69 SVR4-style position-independent macro expansions. It also tells the
70 assembler to mark the output file as PIC.
73 @cindex @option{-mvxworks-pic} option, MIPS
74 Generate VxWorks PIC. This option tells the assembler to generate
75 VxWorks-style position-independent macro expansions.
77 @cindex MIPS architecture options
93 Generate code for a particular MIPS Instruction Set Architecture level.
94 @samp{-mips1} corresponds to the R2000 and R3000 processors,
95 @samp{-mips2} to the R6000 processor, @samp{-mips3} to the
96 R4000 processor, and @samp{-mips4} to the R8000 and R10000 processors.
97 @samp{-mips5}, @samp{-mips32}, @samp{-mips32r2}, @samp{-mips32r3},
98 @samp{-mips32r5}, @samp{-mips32r6}, @samp{-mips64}, @samp{-mips64r2},
99 @samp{-mips64r3}, @samp{-mips64r5}, and @samp{-mips64r6} correspond to
100 generic MIPS V, MIPS32, MIPS32 Release 2, MIPS32 Release 3, MIPS32
101 Release 5, MIPS32 Release 6, MIPS64, and MIPS64 Release 2, MIPS64
102 Release 3, MIPS64 Release 5, and MIPS64 Release 6 ISA processors,
103 respectively. You can also switch instruction sets during the assembly;
104 see @ref{MIPS ISA, Directives to override the ISA level}.
108 Some macros have different expansions for 32-bit and 64-bit registers.
109 The register sizes are normally inferred from the ISA and ABI, but these
110 flags force a certain group of registers to be treated as 32 bits wide at
111 all times. @samp{-mgp32} controls the size of general-purpose registers
112 and @samp{-mfp32} controls the size of floating-point registers.
114 The @code{.set gp=32} and @code{.set fp=32} directives allow the size
115 of registers to be changed for parts of an object. The default value is
116 restored by @code{.set gp=default} and @code{.set fp=default}.
118 On some MIPS variants there is a 32-bit mode flag; when this flag is
119 set, 64-bit instructions generate a trap. Also, some 32-bit OSes only
120 save the 32-bit registers on a context switch, so it is essential never
121 to use the 64-bit registers.
125 Assume that 64-bit registers are available. This is provided in the
126 interests of symmetry with @samp{-mgp32} and @samp{-mfp32}.
128 The @code{.set gp=64} and @code{.set fp=64} directives allow the size
129 of registers to be changed for parts of an object. The default value is
130 restored by @code{.set gp=default} and @code{.set fp=default}.
133 Make no assumptions about whether 32-bit or 64-bit floating-point
134 registers are available. This is provided to support having modules
135 compatible with either @samp{-mfp32} or @samp{-mfp64}. This option can
136 only be used with MIPS II and above.
138 The @code{.set fp=xx} directive allows a part of an object to be marked
139 as not making assumptions about 32-bit or 64-bit FP registers. The
140 default value is restored by @code{.set fp=default}.
143 @itemx -mno-odd-spreg
144 Enable use of floating-point operations on odd-numbered single-precision
145 registers when supported by the ISA. @samp{-mfpxx} implies
146 @samp{-mno-odd-spreg}, otherwise the default is @samp{-modd-spreg}
150 Generate code for the MIPS 16 processor. This is equivalent to putting
151 @code{.module mips16} at the start of the assembly file. @samp{-no-mips16}
152 turns off this option.
156 Enable the use of MIPS16e2 instructions in MIPS16 mode. This is equivalent
157 to putting @code{.module mips16e2} at the start of the assembly file.
158 @samp{-mno-mips16e2} turns off this option.
161 @itemx -mno-micromips
162 Generate code for the microMIPS processor. This is equivalent to putting
163 @code{.module micromips} at the start of the assembly file.
164 @samp{-mno-micromips} turns off this option. This is equivalent to putting
165 @code{.module nomicromips} at the start of the assembly file.
168 @itemx -mno-smartmips
169 Enables the SmartMIPS extensions to the MIPS32 instruction set, which
170 provides a number of new instructions which target smartcard and
171 cryptographic applications. This is equivalent to putting
172 @code{.module smartmips} at the start of the assembly file.
173 @samp{-mno-smartmips} turns off this option.
177 Generate code for the MIPS-3D Application Specific Extension.
178 This tells the assembler to accept MIPS-3D instructions.
179 @samp{-no-mips3d} turns off this option.
183 Generate code for the MDMX Application Specific Extension.
184 This tells the assembler to accept MDMX instructions.
185 @samp{-no-mdmx} turns off this option.
189 Generate code for the DSP Release 1 Application Specific Extension.
190 This tells the assembler to accept DSP Release 1 instructions.
191 @samp{-mno-dsp} turns off this option.
195 Generate code for the DSP Release 2 Application Specific Extension.
196 This option implies @samp{-mdsp}.
197 This tells the assembler to accept DSP Release 2 instructions.
198 @samp{-mno-dspr2} turns off this option.
202 Generate code for the DSP Release 3 Application Specific Extension.
203 This option implies @samp{-mdsp} and @samp{-mdspr2}.
204 This tells the assembler to accept DSP Release 3 instructions.
205 @samp{-mno-dspr3} turns off this option.
209 Generate code for the MT Application Specific Extension.
210 This tells the assembler to accept MT instructions.
211 @samp{-mno-mt} turns off this option.
215 Generate code for the MCU Application Specific Extension.
216 This tells the assembler to accept MCU instructions.
217 @samp{-mno-mcu} turns off this option.
221 Generate code for the MIPS SIMD Architecture Extension.
222 This tells the assembler to accept MSA instructions.
223 @samp{-mno-msa} turns off this option.
227 Generate code for the MIPS eXtended Physical Address (XPA) Extension.
228 This tells the assembler to accept XPA instructions.
229 @samp{-mno-xpa} turns off this option.
233 Generate code for the Virtualization Application Specific Extension.
234 This tells the assembler to accept Virtualization instructions.
235 @samp{-mno-virt} turns off this option.
239 Generate code for the cyclic redundancy check (CRC) Application Specific
240 Extension. This tells the assembler to accept CRC instructions.
241 @samp{-mno-crc} turns off this option.
245 Generate code for the Global INValidate (GINV) Application Specific
246 Extension. This tells the assembler to accept GINV instructions.
247 @samp{-mno-ginv} turns off this option.
250 @itemx -mno-loongson-mmi
251 Generate code for the Loongson MultiMedia extensions Instructions (MMI)
252 Application Specific Extension. This tells the assembler to accept MMI
254 @samp{-mno-loongson-mmi} turns off this option.
257 @itemx -mno-loongson-cam
258 Generate code for the Loongson Content Address Memory (CAM)
259 Application Specific Extension. This tells the assembler to accept CAM
261 @samp{-mno-loongson-cam} turns off this option.
264 @itemx -mno-loongson-ext
265 Generate code for the Loongson EXTensions (EXT) instructions
266 Application Specific Extension. This tells the assembler to accept EXT
268 @samp{-mno-loongson-ext} turns off this option.
270 @item -mloongson-ext2
271 @itemx -mno-loongson-ext2
272 Generate code for the Loongson EXTensions R2 (EXT2) instructions
273 Application Specific Extension. This tells the assembler to accept EXT2
275 @samp{-mno-loongson-ext2} turns off this option.
279 Only use 32-bit instruction encodings when generating code for the
280 microMIPS processor. This option inhibits the use of any 16-bit
281 instructions. This is equivalent to putting @code{.set insn32} at
282 the start of the assembly file. @samp{-mno-insn32} turns off this
283 option. This is equivalent to putting @code{.set noinsn32} at the
284 start of the assembly file. By default @samp{-mno-insn32} is
285 selected, allowing all instructions to be used.
289 Cause nops to be inserted if the read of the destination register
290 of an mfhi or mflo instruction occurs in the following two instructions.
293 @itemx -mno-fix-rm7000
294 Cause nops to be inserted if a dmult or dmultu instruction is
295 followed by a load instruction.
297 @item -mfix-loongson2f-jump
298 @itemx -mno-fix-loongson2f-jump
299 Eliminate instruction fetch from outside 256M region to work around the
300 Loongson2F @samp{jump} instructions. Without it, under extreme cases,
301 the kernel may crash. The issue has been solved in latest processor
302 batches, but this fix has no side effect to them.
304 @item -mfix-loongson2f-nop
305 @itemx -mno-fix-loongson2f-nop
306 Replace nops by @code{or at,at,zero} to work around the Loongson2F
307 @samp{nop} errata. Without it, under extreme cases, the CPU might
308 deadlock. The issue has been solved in later Loongson2F batches, but
309 this fix has no side effect to them.
312 @itemx -mno-fix-vr4120
313 Insert nops to work around certain VR4120 errata. This option is
314 intended to be used on GCC-generated code: it is not designed to catch
315 all problems in hand-written assembler code.
318 @itemx -mno-fix-vr4130
319 Insert nops to work around the VR4130 @samp{mflo}/@samp{mfhi} errata.
323 Insert nops to work around the 24K @samp{eret}/@samp{deret} errata.
326 @itemx -mno-fix-cn63xxp1
327 Replace @code{pref} hints 0 - 4 and 6 - 24 with hint 28 to work around
328 certain CN63XXP1 errata.
332 Generate code for the LSI R4010 chip. This tells the assembler to
333 accept the R4010-specific instructions (@samp{addciu}, @samp{ffc},
334 etc.), and to not schedule @samp{nop} instructions around accesses to
335 the @samp{HI} and @samp{LO} registers. @samp{-no-m4010} turns off this
340 Generate code for the MIPS R4650 chip. This tells the assembler to accept
341 the @samp{mad} and @samp{madu} instruction, and to not schedule @samp{nop}
342 instructions around accesses to the @samp{HI} and @samp{LO} registers.
343 @samp{-no-m4650} turns off this option.
349 For each option @samp{-m@var{nnnn}}, generate code for the MIPS
350 R@var{nnnn} chip. This tells the assembler to accept instructions
351 specific to that chip, and to schedule for that chip's hazards.
353 @item -march=@var{cpu}
354 Generate code for a particular MIPS CPU. It is exactly equivalent to
355 @samp{-m@var{cpu}}, except that there are more value of @var{cpu}
356 understood. Valid @var{cpu} value are:
451 For compatibility reasons, @samp{@var{n}x} and @samp{@var{b}fx} are
452 accepted as synonyms for @samp{@var{n}f1_1}. These values are
455 @item -mtune=@var{cpu}
456 Schedule and tune for a particular MIPS CPU. Valid @var{cpu} values are
457 identical to @samp{-march=@var{cpu}}.
459 @item -mabi=@var{abi}
460 Record which ABI the source code uses. The recognized arguments
461 are: @samp{32}, @samp{n32}, @samp{o64}, @samp{64} and @samp{eabi}.
467 Equivalent to adding @code{.set sym32} or @code{.set nosym32} to
468 the beginning of the assembler input. @xref{MIPS Symbol Sizes}.
470 @cindex @code{-nocpp} ignored (MIPS)
472 This option is ignored. It is accepted for command-line compatibility with
473 other assemblers, which use it to turn off C style preprocessing. With
474 @sc{gnu} @code{@value{AS}}, there is no need for @samp{-nocpp}, because the
475 @sc{gnu} assembler itself never runs the C preprocessor.
479 Disable or enable floating-point instructions. Note that by default
480 floating-point instructions are always allowed even with CPU targets
481 that don't have support for these instructions.
484 @itemx -mdouble-float
485 Disable or enable double-precision floating-point operations. Note
486 that by default double-precision floating-point operations are always
487 allowed even with CPU targets that don't have support for these
490 @item --construct-floats
491 @itemx --no-construct-floats
492 The @code{--no-construct-floats} option disables the construction of
493 double width floating point constants by loading the two halves of the
494 value into the two single width floating point registers that make up
495 the double width register. This feature is useful if the processor
496 support the FR bit in its status register, and this bit is known (by
497 the programmer) to be set. This bit prevents the aliasing of the double
498 width register by the single width registers.
500 By default @code{--construct-floats} is selected, allowing construction
501 of these floating point constants.
504 @itemx --no-relax-branch
505 The @samp{--relax-branch} option enables the relaxation of out-of-range
506 branches. Any branches whose target cannot be reached directly are
507 converted to a small instruction sequence including an inverse-condition
508 branch to the physically next instruction, and a jump to the original
509 target is inserted between the two instructions. In PIC code the jump
510 will involve further instructions for address calculation.
512 The @code{BC1ANY2F}, @code{BC1ANY2T}, @code{BC1ANY4F}, @code{BC1ANY4T},
513 @code{BPOSGE32} and @code{BPOSGE64} instructions are excluded from
514 relaxation, because they have no complementing counterparts. They could
515 be relaxed with the use of a longer sequence involving another branch,
516 however this has not been implemented and if their target turns out of
517 reach, they produce an error even if branch relaxation is enabled.
519 Also no MIPS16 branches are ever relaxed.
521 By default @samp{--no-relax-branch} is selected, causing any out-of-range
522 branches to produce an error.
524 @item -mignore-branch-isa
525 @itemx -mno-ignore-branch-isa
526 Ignore branch checks for invalid transitions between ISA modes.
528 The semantics of branches does not provide for an ISA mode switch, so in
529 most cases the ISA mode a branch has been encoded for has to be the same
530 as the ISA mode of the branch's target label. If the ISA modes do not
531 match, then such a branch, if taken, will cause the ISA mode to remain
532 unchanged and instructions that follow will be executed in the wrong ISA
533 mode causing the program to misbehave or crash.
535 In the case of the @code{BAL} instruction it may be possible to relax
536 it to an equivalent @code{JALX} instruction so that the ISA mode is
537 switched at the run time as required. For other branches no relaxation
538 is possible and therefore GAS has checks implemented that verify in
539 branch assembly that the two ISA modes match, and report an error
540 otherwise so that the problem with code can be diagnosed at the assembly
541 time rather than at the run time.
543 However some assembly code, including generated code produced by some
544 versions of GCC, may incorrectly include branches to data labels, which
545 appear to require a mode switch but are either dead or immediately
546 followed by valid instructions encoded for the same ISA the branch has
547 been encoded for. While not strictly correct at the source level such
548 code will execute as intended, so to help with these cases
549 @samp{-mignore-branch-isa} is supported which disables ISA mode checks
552 By default @samp{-mno-ignore-branch-isa} is selected, causing any invalid
553 branch requiring a transition between ISA modes to produce an error.
555 @cindex @option{-mnan=} command-line option, MIPS
556 @item -mnan=@var{encoding}
557 This option indicates whether the source code uses the IEEE 2008
558 NaN encoding (@option{-mnan=2008}) or the original MIPS encoding
559 (@option{-mnan=legacy}). It is equivalent to adding a @code{.nan}
560 directive to the beginning of the source file. @xref{MIPS NaN Encodings}.
562 @option{-mnan=legacy} is the default if no @option{-mnan} option or
563 @code{.nan} directive is used.
567 @c FIXME! (1) reflect these options (next item too) in option summaries;
568 @c (2) stop teasing, say _which_ instructions expanded _how_.
569 @code{@value{AS}} automatically macro expands certain division and
570 multiplication instructions to check for overflow and division by zero. This
571 option causes @code{@value{AS}} to generate code to take a trap exception
572 rather than a break exception when an error is detected. The trap instructions
573 are only supported at Instruction Set Architecture level 2 and higher.
577 Generate code to take a break exception rather than a trap exception when an
578 error is detected. This is the default.
582 Control generation of @code{.pdr} sections. Off by default on IRIX, on
587 When generating code using the Unix calling conventions (selected by
588 @samp{-KPIC} or @samp{-mcall_shared}), gas will normally generate code
589 which can go into a shared library. The @samp{-mno-shared} option
590 tells gas to generate code which uses the calling convention, but can
591 not go into a shared library. The resulting code is slightly more
592 efficient. This option only affects the handling of the
593 @samp{.cpload} and @samp{.cpsetup} pseudo-ops.
597 @section High-level assembly macros
599 MIPS assemblers have traditionally provided a wider range of
600 instructions than the MIPS architecture itself. These extra
601 instructions are usually referred to as ``macro'' instructions
602 @footnote{The term ``macro'' is somewhat overloaded here, since
603 these macros have no relation to those defined by @code{.macro},
604 @pxref{Macro,, @code{.macro}}.}.
606 Some MIPS macro instructions extend an underlying architectural instruction
607 while others are entirely new. An example of the former type is @code{and},
608 which allows the third operand to be either a register or an arbitrary
609 immediate value. Examples of the latter type include @code{bgt}, which
610 branches to the third operand when the first operand is greater than
611 the second operand, and @code{ulh}, which implements an unaligned
614 One of the most common extensions provided by macros is to expand
615 memory offsets to the full address range (32 or 64 bits) and to allow
616 symbolic offsets such as @samp{my_data + 4} to be used in place of
617 integer constants. For example, the architectural instruction
618 @code{lbu} allows only a signed 16-bit offset, whereas the macro
619 @code{lbu} allows code such as @samp{lbu $4,array+32769($5)}.
620 The implementation of these symbolic offsets depends on several factors,
621 such as whether the assembler is generating SVR4-style PIC (selected by
622 @option{-KPIC}, @pxref{MIPS Options,, Assembler options}), the size of symbols
623 (@pxref{MIPS Symbol Sizes,, Directives to override the size of symbols}),
624 and the small data limit (@pxref{MIPS Small Data,, Controlling the use
625 of small data accesses}).
627 @kindex @code{.set macro}
628 @kindex @code{.set nomacro}
629 Sometimes it is undesirable to have one assembly instruction expand
630 to several machine instructions. The directive @code{.set nomacro}
631 tells the assembler to warn when this happens. @code{.set macro}
632 restores the default behavior.
634 @cindex @code{at} register, MIPS
635 @kindex @code{.set at=@var{reg}}
636 Some macro instructions need a temporary register to store intermediate
637 results. This register is usually @code{$1}, also known as @code{$at},
638 but it can be changed to any core register @var{reg} using
639 @code{.set at=@var{reg}}. Note that @code{$at} always refers
640 to @code{$1} regardless of which register is being used as the
643 @kindex @code{.set at}
644 @kindex @code{.set noat}
645 Implicit uses of the temporary register in macros could interfere with
646 explicit uses in the assembly code. The assembler therefore warns
647 whenever it sees an explicit use of the temporary register. The directive
648 @code{.set noat} silences this warning while @code{.set at} restores
649 the default behavior. It is safe to use @code{.set noat} while
650 @code{.set nomacro} is in effect since single-instruction macros
651 never need a temporary register.
653 Note that while the @sc{gnu} assembler provides these macros for compatibility,
654 it does not make any attempt to optimize them with the surrounding code.
656 @node MIPS Symbol Sizes
657 @section Directives to override the size of symbols
659 @kindex @code{.set sym32}
660 @kindex @code{.set nosym32}
661 The n64 ABI allows symbols to have any 64-bit value. Although this
662 provides a great deal of flexibility, it means that some macros have
663 much longer expansions than their 32-bit counterparts. For example,
664 the non-PIC expansion of @samp{dla $4,sym} is usually:
669 daddiu $4,$4,%higher(sym)
670 daddiu $1,$1,%lo(sym)
675 whereas the 32-bit expansion is simply:
679 daddiu $4,$4,%lo(sym)
682 n64 code is sometimes constructed in such a way that all symbolic
683 constants are known to have 32-bit values, and in such cases, it's
684 preferable to use the 32-bit expansion instead of the 64-bit
687 You can use the @code{.set sym32} directive to tell the assembler
688 that, from this point on, all expressions of the form
689 @samp{@var{symbol}} or @samp{@var{symbol} + @var{offset}}
690 have 32-bit values. For example:
699 will cause the assembler to treat @samp{sym}, @code{sym+16} and
700 @code{sym+0x8000} as 32-bit values. The handling of non-symbolic
701 addresses is not affected.
703 The directive @code{.set nosym32} ends a @code{.set sym32} block and
704 reverts to the normal behavior. It is also possible to change the
705 symbol size using the command-line options @option{-msym32} and
708 These options and directives are always accepted, but at present,
709 they have no effect for anything other than n64.
711 @node MIPS Small Data
712 @section Controlling the use of small data accesses
714 @c This section deliberately glosses over the possibility of using -G
715 @c in SVR4-style PIC, as could be done on IRIX. We don't support that.
716 @cindex small data, MIPS
717 @cindex @code{gp} register, MIPS
718 It often takes several instructions to load the address of a symbol.
719 For example, when @samp{addr} is a 32-bit symbol, the non-PIC expansion
720 of @samp{dla $4,addr} is usually:
724 daddiu $4,$4,%lo(addr)
727 The sequence is much longer when @samp{addr} is a 64-bit symbol.
728 @xref{MIPS Symbol Sizes,, Directives to override the size of symbols}.
730 In order to cut down on this overhead, most embedded MIPS systems
731 set aside a 64-kilobyte ``small data'' area and guarantee that all
732 data of size @var{n} and smaller will be placed in that area.
733 The limit @var{n} is passed to both the assembler and the linker
734 using the command-line option @option{-G @var{n}}, @pxref{MIPS Options,,
735 Assembler options}. Note that the same value of @var{n} must be used
736 when linking and when assembling all input files to the link; any
737 inconsistency could cause a relocation overflow error.
739 The size of an object in the @code{.bss} section is set by the
740 @code{.comm} or @code{.lcomm} directive that defines it. The size of
741 an external object may be set with the @code{.extern} directive. For
742 example, @samp{.extern sym,4} declares that the object at @code{sym}
743 is 4 bytes in length, while leaving @code{sym} otherwise undefined.
745 When no @option{-G} option is given, the default limit is 8 bytes.
746 The option @option{-G 0} prevents any data from being automatically
749 It is also possible to mark specific objects as small by putting them
750 in the special sections @code{.sdata} and @code{.sbss}, which are
751 ``small'' counterparts of @code{.data} and @code{.bss} respectively.
752 The toolchain will treat such data as small regardless of the
755 On startup, systems that support a small data area are expected to
756 initialize register @code{$28}, also known as @code{$gp}, in such a
757 way that small data can be accessed using a 16-bit offset from that
758 register. For example, when @samp{addr} is small data,
759 the @samp{dla $4,addr} instruction above is equivalent to:
762 daddiu $4,$28,%gp_rel(addr)
765 Small data is not supported for SVR4-style PIC.
768 @section Directives to override the ISA level
770 @cindex MIPS ISA override
771 @kindex @code{.set mips@var{n}}
772 @sc{gnu} @code{@value{AS}} supports an additional directive to change
773 the MIPS Instruction Set Architecture level on the fly: @code{.set
774 mips@var{n}}. @var{n} should be a number from 0 to 5, or 32, 32r2, 32r3,
775 32r5, 32r6, 64, 64r2, 64r3, 64r5 or 64r6.
776 The values other than 0 make the assembler accept instructions
777 for the corresponding ISA level, from that point on in the
778 assembly. @code{.set mips@var{n}} affects not only which instructions
779 are permitted, but also how certain macros are expanded. @code{.set
780 mips0} restores the ISA level to its original level: either the
781 level you selected with command-line options, or the default for your
782 configuration. You can use this feature to permit specific MIPS III
783 instructions while assembling in 32 bit mode. Use this directive with
786 @cindex MIPS CPU override
787 @kindex @code{.set arch=@var{cpu}}
788 The @code{.set arch=@var{cpu}} directive provides even finer control.
789 It changes the effective CPU target and allows the assembler to use
790 instructions specific to a particular CPU. All CPUs supported by the
791 @samp{-march} command-line option are also selectable by this directive.
792 The original value is restored by @code{.set arch=default}.
794 The directive @code{.set mips16} puts the assembler into MIPS 16 mode,
795 in which it will assemble instructions for the MIPS 16 processor. Use
796 @code{.set nomips16} to return to normal 32 bit mode.
798 Traditional MIPS assemblers do not support this directive.
800 The directive @code{.set micromips} puts the assembler into microMIPS mode,
801 in which it will assemble instructions for the microMIPS processor. Use
802 @code{.set nomicromips} to return to normal 32 bit mode.
804 Traditional MIPS assemblers do not support this directive.
806 @node MIPS assembly options
807 @section Directives to control code generation
809 @cindex MIPS directives to override command-line options
810 @kindex @code{.module}
811 The @code{.module} directive allows command-line options to be set directly
812 from assembly. The format of the directive matches the @code{.set}
813 directive but only those options which are relevant to a whole module are
814 supported. The effect of a @code{.module} directive is the same as the
815 corresponding command-line option. Where @code{.set} directives support
816 returning to a default then the @code{.module} directives do not as they
819 These module-level directives must appear first in assembly.
821 Traditional MIPS assemblers do not support this directive.
823 @cindex MIPS 32-bit microMIPS instruction generation override
824 @kindex @code{.set insn32}
825 @kindex @code{.set noinsn32}
826 The directive @code{.set insn32} makes the assembler only use 32-bit
827 instruction encodings when generating code for the microMIPS processor.
828 This directive inhibits the use of any 16-bit instructions from that
829 point on in the assembly. The @code{.set noinsn32} directive allows
830 16-bit instructions to be accepted.
832 Traditional MIPS assemblers do not support this directive.
834 @node MIPS autoextend
835 @section Directives for extending MIPS 16 bit instructions
837 @kindex @code{.set autoextend}
838 @kindex @code{.set noautoextend}
839 By default, MIPS 16 instructions are automatically extended to 32 bits
840 when necessary. The directive @code{.set noautoextend} will turn this
841 off. When @code{.set noautoextend} is in effect, any 32 bit instruction
842 must be explicitly extended with the @code{.e} modifier (e.g.,
843 @code{li.e $4,1000}). The directive @code{.set autoextend} may be used
844 to once again automatically extend instructions when necessary.
846 This directive is only meaningful when in MIPS 16 mode. Traditional
847 MIPS assemblers do not support this directive.
850 @section Directive to mark data as an instruction
853 The @code{.insn} directive tells @code{@value{AS}} that the following
854 data is actually instructions. This makes a difference in MIPS 16 and
855 microMIPS modes: when loading the address of a label which precedes
856 instructions, @code{@value{AS}} automatically adds 1 to the value, so
857 that jumping to the loaded address will do the right thing.
859 @kindex @code{.global}
860 The @code{.global} and @code{.globl} directives supported by
861 @code{@value{AS}} will by default mark the symbol as pointing to a
862 region of data not code. This means that, for example, any
863 instructions following such a symbol will not be disassembled by
864 @code{objdump} as it will regard them as data. To change this
865 behavior an optional section name can be placed after the symbol name
866 in the @code{.global} directive. If this section exists and is known
867 to be a code section, then the symbol will be marked as pointing at
868 code not data. Ie the syntax for the directive is:
870 @code{.global @var{symbol}[ @var{section}][, @var{symbol}[ @var{section}]] ...},
872 Here is a short example:
875 .global foo .text, bar, baz .data
886 @section Directives to control the FP ABI
888 * MIPS FP ABI History:: History of FP ABIs
889 * MIPS FP ABI Variants:: Supported FP ABIs
890 * MIPS FP ABI Selection:: Automatic selection of FP ABI
891 * MIPS FP ABI Compatibility:: Linking different FP ABI variants
894 @node MIPS FP ABI History
895 @subsection History of FP ABIs
896 @cindex @code{.gnu_attribute 4, @var{n}} directive, MIPS
897 @cindex @code{.gnu_attribute Tag_GNU_MIPS_ABI_FP, @var{n}} directive, MIPS
898 The MIPS ABIs support a variety of different floating-point extensions
899 where calling-convention and register sizes vary for floating-point data.
900 The extensions exist to support a wide variety of optional architecture
901 features. The resulting ABI variants are generally incompatible with each
902 other and must be tracked carefully.
904 Traditionally the use of an explicit @code{.gnu_attribute 4, @var{n}}
905 directive is used to indicate which ABI is in use by a specific module.
906 It was then left to the user to ensure that command-line options and the
907 selected ABI were compatible with some potential for inconsistencies.
909 @node MIPS FP ABI Variants
910 @subsection Supported FP ABIs
911 The supported floating-point ABI variants are:
914 @item 0 - No floating-point
915 This variant is used to indicate that floating-point is not used within
916 the module at all and therefore has no impact on the ABI. This is the
919 @item 1 - Double-precision
920 This variant indicates that double-precision support is used. For 64-bit
921 ABIs this means that 64-bit wide floating-point registers are required.
922 For 32-bit ABIs this means that 32-bit wide floating-point registers are
923 required and double-precision operations use pairs of registers.
925 @item 2 - Single-precision
926 This variant indicates that single-precision support is used. Double
927 precision operations will be supported via soft-float routines.
930 This variant indicates that although floating-point support is used all
931 operations are emulated in software. This means the ABI is modified to
932 pass all floating-point data in general-purpose registers.
935 This variant existed as an initial attempt at supporting 64-bit wide
936 floating-point registers for O32 ABI on a MIPS32r2 CPU. This has been
937 superseded by 5, 6 and 7.
939 @item 5 - Double-precision 32-bit CPU, 32-bit or 64-bit FPU
940 This variant is used by 32-bit ABIs to indicate that the floating-point
941 code in the module has been designed to operate correctly with either
942 32-bit wide or 64-bit wide floating-point registers. Double-precision
943 support is used. Only O32 currently supports this variant and requires
944 a minimum architecture of MIPS II.
946 @item 6 - Double-precision 32-bit FPU, 64-bit FPU
947 This variant is used by 32-bit ABIs to indicate that the floating-point
948 code in the module requires 64-bit wide floating-point registers.
949 Double-precision support is used. Only O32 currently supports this
950 variant and requires a minimum architecture of MIPS32r2.
952 @item 7 - Double-precision compat 32-bit FPU, 64-bit FPU
953 This variant is used by 32-bit ABIs to indicate that the floating-point
954 code in the module requires 64-bit wide floating-point registers.
955 Double-precision support is used. This differs from the previous ABI
956 as it restricts use of odd-numbered single-precision registers. Only
957 O32 currently supports this variant and requires a minimum architecture
961 @node MIPS FP ABI Selection
962 @subsection Automatic selection of FP ABI
963 @cindex @code{.module fp=@var{nn}} directive, MIPS
964 In order to simplify and add safety to the process of selecting the
965 correct floating-point ABI, the assembler will automatically infer the
966 correct @code{.gnu_attribute 4, @var{n}} directive based on command-line
967 options and @code{.module} overrides. Where an explicit
968 @code{.gnu_attribute 4, @var{n}} directive has been seen then a warning
969 will be raised if it does not match an inferred setting.
971 The floating-point ABI is inferred as follows. If @samp{-msoft-float}
972 has been used the module will be marked as soft-float. If
973 @samp{-msingle-float} has been used then the module will be marked as
974 single-precision. The remaining ABIs are then selected based
975 on the FP register width. Double-precision is selected if the width
976 of GP and FP registers match and the special double-precision variants
977 for 32-bit ABIs are then selected depending on @samp{-mfpxx},
978 @samp{-mfp64} and @samp{-mno-odd-spreg}.
980 @node MIPS FP ABI Compatibility
981 @subsection Linking different FP ABI variants
982 Modules using the default FP ABI (no floating-point) can be linked with
983 any other (singular) FP ABI variant.
985 Special compatibility support exists for O32 with the four
986 double-precision FP ABI variants. The @samp{-mfpxx} FP ABI is specifically
987 designed to be compatible with the standard double-precision ABI and the
988 @samp{-mfp64} FP ABIs. This makes it desirable for O32 modules to be
989 built as @samp{-mfpxx} to ensure the maximum compatibility with other
990 modules produced for more specific needs. The only FP ABIs which cannot
991 be linked together are the standard double-precision ABI and the full
992 @samp{-mfp64} ABI with @samp{-modd-spreg}.
994 @node MIPS NaN Encodings
995 @section Directives to record which NaN encoding is being used
997 @cindex MIPS IEEE 754 NaN data encoding selection
998 @cindex @code{.nan} directive, MIPS
999 The IEEE 754 floating-point standard defines two types of not-a-number
1000 (NaN) data: ``signalling'' NaNs and ``quiet'' NaNs. The original version
1001 of the standard did not specify how these two types should be
1002 distinguished. Most implementations followed the i387 model, in which
1003 the first bit of the significand is set for quiet NaNs and clear for
1004 signalling NaNs. However, the original MIPS implementation assigned the
1005 opposite meaning to the bit, so that it was set for signalling NaNs and
1006 clear for quiet NaNs.
1008 The 2008 revision of the standard formally suggested the i387 choice
1009 and as from Sep 2012 the current release of the MIPS architecture
1010 therefore optionally supports that form. Code that uses one NaN encoding
1011 would usually be incompatible with code that uses the other NaN encoding,
1012 so MIPS ELF objects have a flag (@code{EF_MIPS_NAN2008}) to record which
1013 encoding is being used.
1015 Assembly files can use the @code{.nan} directive to select between the
1016 two encodings. @samp{.nan 2008} says that the assembly file uses the
1017 IEEE 754-2008 encoding while @samp{.nan legacy} says that the file uses
1018 the original MIPS encoding. If several @code{.nan} directives are given,
1019 the final setting is the one that is used.
1021 The command-line options @option{-mnan=legacy} and @option{-mnan=2008}
1022 can be used instead of @samp{.nan legacy} and @samp{.nan 2008}
1023 respectively. However, any @code{.nan} directive overrides the
1024 command-line setting.
1026 @samp{.nan legacy} is the default if no @code{.nan} directive or
1027 @option{-mnan} option is given.
1029 Note that @sc{gnu} @code{@value{AS}} does not produce NaNs itself and
1030 therefore these directives do not affect code generation. They simply
1031 control the setting of the @code{EF_MIPS_NAN2008} flag.
1033 Traditional MIPS assemblers do not support these directives.
1035 @node MIPS Option Stack
1036 @section Directives to save and restore options
1038 @cindex MIPS option stack
1039 @kindex @code{.set push}
1040 @kindex @code{.set pop}
1041 The directives @code{.set push} and @code{.set pop} may be used to save
1042 and restore the current settings for all the options which are
1043 controlled by @code{.set}. The @code{.set push} directive saves the
1044 current settings on a stack. The @code{.set pop} directive pops the
1045 stack and restores the settings.
1047 These directives can be useful inside an macro which must change an
1048 option such as the ISA level or instruction reordering but does not want
1049 to change the state of the code which invoked the macro.
1051 Traditional MIPS assemblers do not support these directives.
1053 @node MIPS ASE Instruction Generation Overrides
1054 @section Directives to control generation of MIPS ASE instructions
1056 @cindex MIPS MIPS-3D instruction generation override
1057 @kindex @code{.set mips3d}
1058 @kindex @code{.set nomips3d}
1059 The directive @code{.set mips3d} makes the assembler accept instructions
1060 from the MIPS-3D Application Specific Extension from that point on
1061 in the assembly. The @code{.set nomips3d} directive prevents MIPS-3D
1062 instructions from being accepted.
1064 @cindex SmartMIPS instruction generation override
1065 @kindex @code{.set smartmips}
1066 @kindex @code{.set nosmartmips}
1067 The directive @code{.set smartmips} makes the assembler accept
1068 instructions from the SmartMIPS Application Specific Extension to the
1069 MIPS32 ISA from that point on in the assembly. The
1070 @code{.set nosmartmips} directive prevents SmartMIPS instructions from
1073 @cindex MIPS MDMX instruction generation override
1074 @kindex @code{.set mdmx}
1075 @kindex @code{.set nomdmx}
1076 The directive @code{.set mdmx} makes the assembler accept instructions
1077 from the MDMX Application Specific Extension from that point on
1078 in the assembly. The @code{.set nomdmx} directive prevents MDMX
1079 instructions from being accepted.
1081 @cindex MIPS DSP Release 1 instruction generation override
1082 @kindex @code{.set dsp}
1083 @kindex @code{.set nodsp}
1084 The directive @code{.set dsp} makes the assembler accept instructions
1085 from the DSP Release 1 Application Specific Extension from that point
1086 on in the assembly. The @code{.set nodsp} directive prevents DSP
1087 Release 1 instructions from being accepted.
1089 @cindex MIPS DSP Release 2 instruction generation override
1090 @kindex @code{.set dspr2}
1091 @kindex @code{.set nodspr2}
1092 The directive @code{.set dspr2} makes the assembler accept instructions
1093 from the DSP Release 2 Application Specific Extension from that point
1094 on in the assembly. This directive implies @code{.set dsp}. The
1095 @code{.set nodspr2} directive prevents DSP Release 2 instructions from
1098 @cindex MIPS DSP Release 3 instruction generation override
1099 @kindex @code{.set dspr3}
1100 @kindex @code{.set nodspr3}
1101 The directive @code{.set dspr3} makes the assembler accept instructions
1102 from the DSP Release 3 Application Specific Extension from that point
1103 on in the assembly. This directive implies @code{.set dsp} and
1104 @code{.set dspr2}. The @code{.set nodspr3} directive prevents DSP
1105 Release 3 instructions from being accepted.
1107 @cindex MIPS MT instruction generation override
1108 @kindex @code{.set mt}
1109 @kindex @code{.set nomt}
1110 The directive @code{.set mt} makes the assembler accept instructions
1111 from the MT Application Specific Extension from that point on
1112 in the assembly. The @code{.set nomt} directive prevents MT
1113 instructions from being accepted.
1115 @cindex MIPS MCU instruction generation override
1116 @kindex @code{.set mcu}
1117 @kindex @code{.set nomcu}
1118 The directive @code{.set mcu} makes the assembler accept instructions
1119 from the MCU Application Specific Extension from that point on
1120 in the assembly. The @code{.set nomcu} directive prevents MCU
1121 instructions from being accepted.
1123 @cindex MIPS SIMD Architecture instruction generation override
1124 @kindex @code{.set msa}
1125 @kindex @code{.set nomsa}
1126 The directive @code{.set msa} makes the assembler accept instructions
1127 from the MIPS SIMD Architecture Extension from that point on
1128 in the assembly. The @code{.set nomsa} directive prevents MSA
1129 instructions from being accepted.
1131 @cindex Virtualization instruction generation override
1132 @kindex @code{.set virt}
1133 @kindex @code{.set novirt}
1134 The directive @code{.set virt} makes the assembler accept instructions
1135 from the Virtualization Application Specific Extension from that point
1136 on in the assembly. The @code{.set novirt} directive prevents Virtualization
1137 instructions from being accepted.
1139 @cindex MIPS eXtended Physical Address (XPA) instruction generation override
1140 @kindex @code{.set xpa}
1141 @kindex @code{.set noxpa}
1142 The directive @code{.set xpa} makes the assembler accept instructions
1143 from the XPA Extension from that point on in the assembly. The
1144 @code{.set noxpa} directive prevents XPA instructions from being accepted.
1146 @cindex MIPS16e2 instruction generation override
1147 @kindex @code{.set mips16e2}
1148 @kindex @code{.set nomips16e2}
1149 The directive @code{.set mips16e2} makes the assembler accept instructions
1150 from the MIPS16e2 Application Specific Extension from that point on in the
1151 assembly, whenever in MIPS16 mode. The @code{.set nomips16e2} directive
1152 prevents MIPS16e2 instructions from being accepted, in MIPS16 mode. Neither
1153 directive affects the state of MIPS16 mode being active itself which has
1156 @cindex MIPS cyclic redundancy check (CRC) instruction generation override
1157 @kindex @code{.set crc}
1158 @kindex @code{.set nocrc}
1159 The directive @code{.set crc} makes the assembler accept instructions
1160 from the CRC Extension from that point on in the assembly. The
1161 @code{.set nocrc} directive prevents CRC instructions from being accepted.
1163 @cindex MIPS Global INValidate (GINV) instruction generation override
1164 @kindex @code{.set ginv}
1165 @kindex @code{.set noginv}
1166 The directive @code{.set ginv} makes the assembler accept instructions
1167 from the GINV Extension from that point on in the assembly. The
1168 @code{.set noginv} directive prevents GINV instructions from being accepted.
1170 @cindex Loongson MultiMedia extensions Instructions (MMI) generation override
1171 @kindex @code{.set loongson-mmi}
1172 @kindex @code{.set noloongson-mmi}
1173 The directive @code{.set loongson-mmi} makes the assembler accept
1174 instructions from the MMI Extension from that point on in the assembly.
1175 The @code{.set noloongson-mmi} directive prevents MMI instructions from
1178 @cindex Loongson Content Address Memory (CAM) generation override
1179 @kindex @code{.set loongson-cam}
1180 @kindex @code{.set noloongson-cam}
1181 The directive @code{.set loongson-cam} makes the assembler accept
1182 instructions from the Loongson CAM from that point on in the assembly.
1183 The @code{.set noloongson-cam} directive prevents Loongson CAM instructions
1184 from being accepted.
1186 @cindex Loongson EXTensions (EXT) instructions generation override
1187 @kindex @code{.set loongson-ext}
1188 @kindex @code{.set noloongson-ext}
1189 The directive @code{.set loongson-ext} makes the assembler accept
1190 instructions from the Loongson EXT from that point on in the assembly.
1191 The @code{.set noloongson-ext} directive prevents Loongson EXT instructions
1192 from being accepted.
1194 @cindex Loongson EXTensions R2 (EXT2) instructions generation override
1195 @kindex @code{.set loongson-ext2}
1196 @kindex @code{.set noloongson-ext2}
1197 The directive @code{.set loongson-ext2} makes the assembler accept
1198 instructions from the Loongson EXT2 from that point on in the assembly.
1199 This directive implies @code{.set loognson-ext}.
1200 The @code{.set noloongson-ext2} directive prevents Loongson EXT2 instructions
1201 from being accepted.
1203 Traditional MIPS assemblers do not support these directives.
1205 @node MIPS Floating-Point
1206 @section Directives to override floating-point options
1208 @cindex Disable floating-point instructions
1209 @kindex @code{.set softfloat}
1210 @kindex @code{.set hardfloat}
1211 The directives @code{.set softfloat} and @code{.set hardfloat} provide
1212 finer control of disabling and enabling float-point instructions.
1213 These directives always override the default (that hard-float
1214 instructions are accepted) or the command-line options
1215 (@samp{-msoft-float} and @samp{-mhard-float}).
1217 @cindex Disable single-precision floating-point operations
1218 @kindex @code{.set singlefloat}
1219 @kindex @code{.set doublefloat}
1220 The directives @code{.set singlefloat} and @code{.set doublefloat}
1221 provide finer control of disabling and enabling double-precision
1222 float-point operations. These directives always override the default
1223 (that double-precision operations are accepted) or the command-line
1224 options (@samp{-msingle-float} and @samp{-mdouble-float}).
1226 Traditional MIPS assemblers do not support these directives.
1229 @section Syntactical considerations for the MIPS assembler
1231 * MIPS-Chars:: Special Characters
1235 @subsection Special Characters
1237 @cindex line comment character, MIPS
1238 @cindex MIPS line comment character
1239 The presence of a @samp{#} on a line indicates the start of a comment
1240 that extends to the end of the current line.
1242 If a @samp{#} appears as the first character of a line, the whole line
1243 is treated as a comment, but in this case the line can also be a
1244 logical line number directive (@pxref{Comments}) or a
1245 preprocessor control command (@pxref{Preprocessing}).
1247 @cindex line separator, MIPS
1248 @cindex statement separator, MIPS
1249 @cindex MIPS line separator
1250 The @samp{;} character can be used to separate statements on the same