Updated to match latest assembler results.

[deliverable/binutils-gdb.git] / gas / testsuite / ChangeLog

Mon Jun  8 18:47:11 1998  Nick Clifton  <nickc@cygnus.com>

        * gas/d30v/array.d: Updated to match latest assembler results.
        * gas/d30v/reloc.d: Partially updated to match latest assembler
        results. 

start-sanitize-sky
Mon Jun  8 15:40:23 1998  Doug Evans  <devans@canuck.cygnus.com>

        * gas/dvp/relax-1.[sd]: Test .org/relaxing interaction.

end-sanitize-sky
Fri Jun  5 19:15:59 1998  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>

        * gas/m68k/operands.s: For all pc relative addresses change tstl
        to pea since the former does not allow pcrel on m68000.  Do not
        make label foo global, so that references to it can be relaxed on
        ELF targets.
        * gas/m68k/operands.d, gas/m68k/op68000.d: Updated.

Tue Jun  2 15:08:36 1998  Geoff Keating  <geoffk@ozemail.com.au>

        * gas/ppc/ppc.exp: Run simpshft test.
        * gas/ppc/simpshft.d: New file.
        * gas/ppc/simpshft.s: New file.

Mon Jun  1 17:00:22 1998  Jeffrey A Law  (law@cygnus.com)

start-sanitize-r5900
        * gas/mips/break5900.d: Update after interlock changes.
        * gas/mips/mips.exp: The r5900 has ilocks and gpr_ilocks.
end-sanitize-r5900
        * gas/mips/div-ilocks.d: Handle both "break" instruction variants.
        * gas/mips/{div.d, mul-ilocks.d, mul.d}: Likewise.
        
start-sanitize-sky
Mon Jun  1 14:33:43 1998  Doug Evans  <devans@canuck.cygnus.com>

        * gas/all/gas.exp: Don't run `align' test for dvp-*-*.
        * gas/macros/macros.exp: Don't run `semi' test for dvp-*-*.
        * gas/dvp/align.[sd]: New testcase.
        * gas/dvp/semi.[sd]: New testcase.

end-sanitize-sky
Fri May 29 12:07:35 1998  Ian Lance Taylor  <ian@cygnus.com>

        * gas/mips/mips.exp: Adjust ilocks initialization to match current
        assembler defaults more closely.

        * gas/sh/fp.s: Remove ftst/nan.  The assembler no longer supports
        the instruction.
        * gas/sh/basic.exp: Adjust accordingly.

start-sanitize-d30v
Wed May 27 15:26:51 1998  Nick Clifton  <nickc@cygnus.com>

        * gas/d30v/align.d: Updated to match latest assembler output.
        * gas/d30v/inst.d: Updated to match latest assembler output.
        * gas/d30v/inst.s: Updated to match latest assembler rules.
        * gas/d30v/opt.d: Updated to match latest assembler output.

end-sanitize-d30v
Fri May 22 15:56:51 1998  Doug Evans  <devans@canuck.cygnus.com>

        * gas/m32r/allinsn.d: Handle 64 bit bfd_vma.
        * gas/m32r/uppercase.d: Likewise.
start-sanitize-m32rx
        * gas/m32r/m32rx.d: Likewise.
end-sanitize-m32rx

start-sanitize-sky
Thu May 21 15:14:35 1998  Doug Evans  <devans@canuck.cygnus.com>

        * gas/dvp/upper-2.[sd]: Test absent dest -> xyzw.

end-sanitize-sky
Thu May 21 15:03:06 1998  Nick Clifton  <nickc@cygnus.com>

        * gas/arm/thumb.s: Add period to start of labels to prevent
        assembler thinking that they are function entry points.

Tue May 19 18:17:10 1998  Ian Lance Taylor  <ian@cygnus.com>

        * gas/mips/mips16.d: Correct to reflect bug fix to disassembler.

start-sanitize-r5900
Mon May 18 11:47:12 1998  Jeffrey A Law  (law@cygnus.com)

        * vu0.s: Test vopmula/vopmsub with and without opcode
        completer.
        * vu0.d: Corresponding changes.

end-sanitize-r5900
Mon May 18 13:11:45 1998  Frank Ch. Eigler  <fche@cygnus.com>

        * gas/mips/{div,ld,mul}.d: Add assembler -mcpu= flag to match
        disassembler.
start-sanitize-r5900
        * gas/mips/break5900.[sd]: Test that break instructions generated
        in div/etc. macro instructions are of 20-bit variety for R5900.
        * gas/mips/r5900.[sd]: Added mult1 tests.
end-sanitize-r5900
        
Fri May 15 14:51:01 1998  Gavin Koch  <gavin@cygnus.com>

        * gas/mips/mips.exp: Distinguish chains with 32-bit addresses.
        * gas/mips/ld-ilocks-addr32.d : New.

Wed May 13 15:06:31 1998  Doug Evans  <devans@canuck.cygnus.com>

        * gas/m32r/uppercase.[sd]: Test for HIGH,SHIGH,LOW,SDA.
start-sanitize-m32rx
        * gas/m32r/m32rx.d: Pass --enable-special to gas.
end-sanitize-m32rx

start-sanitize-sky
Mon May 11 13:04:58 1998  Frank Ch. Eigler  <fche@cygnus.com>

        * gas/mips/break5900.[sd]: New tests for R5900 20-bit break.
        * gas/mips/mips.exp: Run them.
        
end-sanitize-sky
Thu May  7 13:05:25 1998  Frank Ch. Eigler  <fche@cygnus.com>

        * gas/mips/break20.[sd]: New tests for 20-bit operand break and
        sddbp instructions. 
        * gas/mips/trap20.[sd]: New tests for 20-bit operand trap
        instructions. 
        * gas/mips/mips.exp: Run them.

start-sanitize-d30v
Thu Apr 30 11:55:01 1998  Frank Ch. Eigler  <fche@cygnus.com>

        * gas/d30v/{inst,array,opt,reloc}.d: Accept <symbol+offset> labels
        in disassembly, where the offset is in hex and has a "0x" prefix.
        
end-sanitize-d30v
Tue Apr 28 16:38:34 1998  Frank Ch. Eigler  <fche@cygnus.com>

        * gas/mips/lineno.[sd]: Assembly source line number test.
        * gas/mips/mips.exp: Added lineno test.

start-sanitize-sky
Thu Apr 16 11:23:13 1998  Doug Evans  <devans@canuck.cygnus.com>

        * gas/dvp/{vif-1.[sd],vif-3.s}: Update, '*' no longer supported as
        unpack address.  * gas/dvp/vif-4.[sd]: Test wl > cl with no input
        data.

end-sanitize-sky
start-sanitize-r5900
Wed Apr 15 13:08:30 1998  Frank Ch. Eigler <fche.cygnus.com>

        * gas/mips/vu0.s: Updated test case for changed specs of
        VCALLMSR instruction.
        * gas/mips/vu0.d: Corresponding change.

end-sanitize-r5900
Wed Apr  8 18:45:17 1998  Jeffrey A Law  (law@cygnus.com)

        * gas/testsuite/all/gas.exp: No longer expect failures for
        difference of undefined symbols on mn10x00 targets.

start-sanitize-sky
Wed Apr  8 15:51:13 1998  Doug Evans  <devans@canuck.cygnus.com>

        * gas/dvp/br-2.[sd]: New testcase.
        * gas/dvp/dvp.exp: Run them.

Mon Apr  6 17:08:01 1998  Doug Evans  <devans@canuck.cygnus.com>

        * gas/dvp/vif-3.[sd]: New testcase.
        * gas/dvp/vif-4.[sd]: New testcase.
        * gas/dvp/dvp.exp: Run them.

Fri Apr  3 12:19:33 1998  Doug Evans  <devans@canuck.cygnus.com>

        * gas/dvp/relax-1.[sd]: New testcase.
        * gas/dvp/dvp.exp: Run it.

end-sanitize-sky
start-sanitize-m32rx
Thu Apr  2 16:49:29 1998  Nick Clifton  <nickc@cygnus.com>

        * gas/m32r/m32rx.d: Fix SATB and SAT bit patterns.
        * gas/m32r/allinsn.d: Fix expected result for CMPUI insn.

Wed Apr  1 14:59:29 1998  Nick Clifton  <nickc@cygnus.com>

        * gas/m32r/m32rx.d: Fix SATB bit pattern.

Sun Mar 29 13:05:41 1998  Nick Clifton  <nickc@cygnus.com>

        * gas/m32r/m32rx.d: Fix expected results for parallel lock.

end-sanitize-m32rx
start-sanitize-sky
Wed Mar 25 14:27:46 1998  Doug Evans  <devans@canuck.cygnus.com>

        * gas/dvp/vif-1.d: Update.

end-sanitize-sky
start-sanitize-r5900
Tue Mar 24 18:21:03 1998  Jeffrey A Law  (law@cygnus.com)

        * gas/mips/vu0.s: Add tests for "bc2f", "bc2fl", "bc2t", "bc2tl",
        "cfc.i", "cfc.ni", "ctc.i", and "ctc.ni".
        * gas/mips/vu0.d: Corresponding changes.

end-sanitize-r5900
start-sanitize-sky
Mon Mar 23 13:26:12 1998  Doug Evans  <devans@canuck.cygnus.com>

        * gas/dvp/mpg-1.[sd]: New files.
        * gas/dvp/mpg-1vu.s: New file.
        * gas/dvp/dvp.exp: Run new test mpg-1.s.

end-sanitize-sky
start-sanitize-m32rx
Mon Mar 23 11:34:00 1998  Nick Clifton  <nickc@cygnus.com>

        * gas/m32r/m32rx.d: Fix sath bit pattern (PR15418).

end-sanitize-m32rx
Mon Mar 23 10:47:33 1998  Frank Ch. Eigler  <fche@cygnus.com>

        * gas/all/align.s: Back out ".section text" change below;
        use ".text" again.
        * gas/macros/semi.s: Ditto.
        
start-sanitize-r5900
Sun Mar 22 13:16:31 1998  Jeffrey A Law  (law@cygnus.com)

        * gas/mips/vu0.d: We don't want relocations in the output.
        (vcallms): Enable opcode checking on this test.

end-sanitize-r5900
Fri Mar 20 18:51:49 1998  Frank Ch. Eigler  <fche@cygnus.com>

        * gas/all/align.s: Identify ".text" section explicitly.
        * gas/macros/semi.s: Ditto.
        
start-sanitize-sky
        * gas/dvp/dma-2.d: Change to match automatic alignment of dmadata.
end-sanitize-sky
        
start-sanitize-r5900
Thu Mar 19 14:13:12 1998  Jeffrey A Law  (law@cygnus.com)

        * gas/mips/vu0.s, gas/mips/vu0.d: New testfiles.
        * gas/mips/mips.exp: Run vu0 tests.

end-sanitize-r5900
        
start-sanitize-sky
Thu Mar 19 10:49:15 1998  Doug Evans  <devans@canuck.cygnus.com>

        * gas/dvp/vif-1.[sd]: stcycle -> stcycl.

Tue Mar 17 14:02:13 1998  Doug Evans  <devans@canuck.cygnus.com>

        * gas/dvp/dma-[12].[sd]: New testcases.
        * gas/dvp/dvp.exp: Run them.

Thu Mar 12 15:25:13 1998  Doug Evans  <devans@canuck.cygnus.com>

        * gas/dvp/*.d: Update, dest spec on registers is printed again.

Fri Mar  6 11:22:23 1998  Doug Evans  <devans@canuck.cygnus.com>

        * gas/dvp/upper-2.d (loi): Fix expected output.
        * gas/dvp/vif-1.[sd]: Add more tests.
        * gas/dvp/vif-2.[sd]: New testcases.
        * gas/dvp/gif{packed,reglist,image}-1.[sd]: New testcases.
        * gas/dvp/dvp.exp: Run them.  Pass -I${srcdir}/${subdir} to gas.

end-sanitize-sky
start-sanitize-vr4320
Tue Mar  3 11:06:53 1998  Gavin Koch  <gavin@cygnus.com>

        * gas/mips/mips.exp (ilocks) : Added mips64vr4320*-*-*.

end-sanitize-vr4320
Mon Mar  2 13:30:40 1998  Doug Evans  <devans@seba.cygnus.com>

        * gas/m32r/allinsn.[sd] (ldi8a,ldi16a): Delete.
        (ldi16): Improve test.
        (nop): Fix test.

start-sanitize-vr5400
Mon Feb 23 10:31:05 1998  Jeffrey A Law  (law@cygnus.com)

        * gas/mips/vr5400.s: Use absolute expression for performance
        register number.
        * gas/mips/vr5400.d: Corresponding changes.

end-sanitize-vr5400
start-sanitize-r5900
Mon Feb 23 10:31:05 1998  Jeffrey A Law  (law@cygnus.com)

        * gas/mips/r5900.s: Use absolute expression for performance
        register number.
        * gas/mips/r5900.d: Corresponding changes.

Fri Feb 20 01:29:16 1998  Jeffrey A Law  (law@cygnus.com)

        * gas/mips/r5900.s, gas/mips/r5900.d: Update for "mula.s" change.

end-sanitize-r5900
start-sanitize-m32rx
Thu Feb 19 10:35:48 1998  Nick Clifton  <nickc@cygnus.com>

        * gas/m32r/m32rx.s (mvtc__subv): Avoid register conflict.

        * gas/m32r/m32rx.d: Updated to match latest assembler output.
end-sanitize-m32rx
start-sanitize-sky
Tue Feb 17 18:44:12 1998  Doug Evans  <devans@canuck.cygnus.com>

        * gas/dvp/{basic-1,lower-1,upper-1,upper-2}.d: Update to remove dest
        spec on operands.

end-sanitize-sky
start-sanitize-m32rx
Fri Feb 13 14:44:32 1998  Nick Clifton  <nickc@cygnus.com>

        * gas/m32r/m32rx.s (rte__subx): Do not perform RTE and SUBX in
        parallel since they both write to the C bit.

end-sanitize-m32rx
start-sanitize-sky
Thu Feb 12 17:42:39 1998  Doug Evans  <devans@canuck.cygnus.com>

        * gas/dvp/upper-2.[sd]: New testcase.
        * gas/dvp/dvp.exp: Run it.

end-sanitize-sky
Thu Feb 12 20:12:39 1998  Ian Lance Taylor  <ian@cygnus.com>

        * gasp/macro.out: Adjust to reflect the fact that keyword
        arguments are now permitted after positional arguments.

start-sanitize-sky
Wed Feb 11 17:07:25 1998  Doug Evans  <devans@canuck.cygnus.com>

        * gas/dvp/{*}: .text renamed to .vutext.
        * gas/dvp/vif-1.[sd]: Renamed from pke-1.[sd].

Tue Feb 10 15:32:22 1998  Ian Carmichael  <iancarm@cygnus.com>

        * gas/dvp/{error.exp,bignum-1.[sd],bignum_d.s}: New files.

end-sanitize-sky
start-sanitize-m32rx
Mon Feb  9 17:19:05 1998  Nick Clifton  <nickc@cygnus.com>

        * gas/m32r/m32rx.s: Add tests for DIVH and new versions of RAC and
        RACH instructions.  Rename MACHL1 ro MACLH1.
end-sanitize-m32rx
Wed Feb  4 15:27:44 1998  Nick Clifton  <nickc@cygnus.com>

        * gas/arm/arm7t.d: Update to match latest assembler output.

Wed Feb  4 15:40:00 1998  Geoffrey Keating  <geoffk@ozemail.com.au>

        * gas/ppc/ppc.exp: New file.
        * gas/ppc/astest.s, gas/ppc/astest.d: New test.
        * gas/ppc/astest2.s, gas/ppc/astest2.d: New test.

Sun Feb  1 21:43:54 1998  Jeffrey A Law  (law@cygnus.com)

        * gas/mips/4010.s: Pad test code out to a 16byte boundary.
        * gas/mips/4010.d: Corresponding changes.
        * gas/mips/4100.s: Pad test code out to a 16byte boundary.
        * gas/mips/4100.d: Corresponding changes.
        * gas/mips/4650.s: Pad test code out to a 16byte boundary.
        * gas/mips/4650.d: Corresponding changes.
start-sanitize-r5900
        * gas/mips/5900.s: Pad test code out to a 16byte boundary.
        * gas/mips/5900.d: Corresponding changes.
end-sanitize-r5900

Fri Jan 30 14:09:13 1998  Ian Lance Taylor  <ian@cygnus.com>

        * gas/mri/moveml.d: Add test comments, fix regexps.

Thu Jan 29 13:34:49 1998  Doug Evans  <devans@canuck.cygnus.com>

        * gas/m32r/{allinsn,high-1}.d: Allow # constant prefix to be missing.

Thu Jan 29 09:43:50 1998  Richard Henderson  <rth@cygnus.com>

        * gas/m68k/mri_moveml.[sd]: Moved to ...
        * gas/mri/moveml.[sd]: ... here.
        * gas/mri/mri.exp: Run it.

start-sanitize-sky
Wed Jan 28 10:18:21 1998  Doug Evans  <devans@canuck.cygnus.com>

        * dvp/dvp.exp: New file.
        * dvp/{basic-1,br-1,upper-1,lower-1,pke-1}.[sd]: New testcases.

end-sanitize-sky
Tue Jan 27 21:55:44 1998  Jeffrey A Law  (law@cygnus.com)

        * gas/mips/4010.s: Add 4010 tests.
        * gas/mips/4010.d: Expected output.
        * gas/mips/4100.s: Add 4010 tests.
        * gas/mips/4100.d: Expected output.
        * gas/mips/4650.s: Add 4010 tests.
        * gas/mips/4650.d: Expected output.
        * gas/mips/mips.exp: Run the new tests.
        * gas/mips/*.d: Pass the right processor model to objdump.
        Fix minor cases where expected output was wrong due to opcode
        conflicts.

Tue Jan 27 05:35:02 1998  Richard Henderson  <rth@cygnus.com>

        * gas/m68k/mri_moveml.[sd]: New testcase.

start-sanitize-m32rx
Fri Jan 23 10:30:29 1998  Nick Clifton  <nickc@cygnus.com>

        * gas/m32r/m32rx.s: Use 'label' as desitnation of branches.
        * gas/m32r/m32rx.d: Update to match latest disassembly.

end-sanitize-m32rx
Thu Jan 22 17:29:07 1998  Nick Clifton  <nickc@cygnus.com>

        * gas/m32r/high-1.d: Add hash prefix to constants.

        * gas/m32r/allinsn.s: Add hash prefix to some constants.
        * gas/m32r/allinsn.d: Add hash prefix to constants.
start-sanitize-m32rx
        * gas/m32r/m32rx.s: Add tests for automatic parallelisation.
        * gas/m32r/m32rx.d: Add results of automatic parallelisation.
        * gas/m32r/relax-1.d: Add results of automatic parallelisation.
        * gas/m32r/uppercase.d: Add results of automatic parallelisation.
end-sanitize-m32rx

Wed Jan 21 21:24:08 1998  Manfred Hollstein  <manfred@s-direktnet.de>

        * gas/m88k/init.d: Fix hexadecimal offsets.

Wed Jan 14 17:49:22 1998  Nick Clifton  <nickc@cygnus.com>

        * gas/m32r/uppercase.d: Fix white space matching.
        * gas/m32r/relax-1.d: Fix white space matching.
start-sanitize-m32rx    
        * gas/m32r/m32rx.d: Add expected results.
        * gas/m32r/m32rx.s: Correct typos in test cases.
end-sanitize-m32rx      

Wed Jan 14 15:44:32 1998  Jeffrey A Law  (law@cygnus.com)

        * gas/mips/div.d: Update for recent assembler changes.
        * gas/mips/div-ilocks.d: Likewise.

Wed Jan 14 11:13:06 1998  Doug Evans  <devans@seba.cygnus.com>

        * gas/m32r/allinsn.d (cmpui): Update output to new format.

start-sanitize-r5900
Mon Dec 22 12:47:16 1997  Ian Lance Taylor  <ian@cygnus.com>

        * gas/mips/r5900.d: Update for current disassembler.

end-sanitize-r5900
Thu Dec 18 11:10:42 1997  Nick Clifton  <nickc@cygnus.com>

start-sanitize-m32rx
        * gas/m32r/m32rx.d: New file.
        * gas/m32r/m32rx.s: New file.
        * gas/m32r/m32rx.exp: New file.

end-sanitize-m32rx
        * gas/arm/inst.d: Updated to match latest disassembler changes.

        * gas/arm/arm7t.d: Updated to match latest disassembler changes.

Tue Dec 16 22:19:25 1997  Ken Raeburn  <raeburn@cygnus.com>

        * gas/mips/lb-xgot.d, gas/mips/rol.d, gas/mips/jal-svr4pic.d,
        gas/mips/jal-xgot.d: Add assembler option to select a specific
        target chip, the R3000.
        * gas/mips/lb-xgot-ilocks.d: New test, specifically selecting
        R3900.
        * gas/mips/mips.exp: Run it.

start-sanitize-r5900
Tue Dec 16 12:54:30 1997  Jeffrey A Law  (law@cygnus.com)

        * gas/mips/r5900.s: Add more r5900 tests.
        * gas/mips/r5900.d: Corresponding changes.

        * gas/mips/r5900.s: New testcase for r5900 insns.
        * gas/mips/r5900.d: Support file for r5900 tests.
        * gas/mips/mips.exp: Run r5900 tests too.

end-sanitize-r5900
start-sanitize-vr5400
Mon Dec 15 10:34:15 1997  Jeffrey A Law  (law@cygnus.com)

        * gas/mips/vr5400.s: Tweak mfpc, mtpc, mfps, mfps, and mtps for
        better testing coverage.
        * gas/mips/vr5400.d: Corresponding changes.

end-sanitize-vr5400
start-sanitize-tx49
Thu Dec 11 09:23:05 1997  Gavin Koch  <gavin@cygnus.com>

        * gas/mips/mips.exp: Don't run the mips16 test for tx49.

end-sanitize-tx49
start-sanitize-vr5400
Tue Dec  9 13:19:58 1997  Jeffrey A Law  (law@cygnus.com)

        * gas/mips/vr5400.d: Minor tweaks for more accurate matching.

Fri Nov  7 21:32:01 1997  Ken Raeburn  <raeburn@cygnus.com>

        * gas/mips/vr5400.s, gas/mips/vr5400.d: New test, for
        VR5400-specific instructions.
        * gas/mips/mips.exp: Run it.

end-sanitize-vr5400
        * gas/ieee-fp/x930509a.exp: Don't run IEEE FP tests for Vax
        targets.

start-sanitize-tx49
Wed Oct 29 16:27:30 1997  Gavin Koch  <gavin@cygnus.com>

        * gas/mips/mips.exp: Add tx49 configury.

end-sanitize-tx49
Wed Oct 15 10:40:14 1997  Jeffrey A Law  (law@cygnus.com)

        * gas/ieee-fp/x930509a.s: Tweak slightly to work on the PA.

        * gas/hppa/unsorted/unsorted.exp: Update for recent disassembler
        changes.

Thu Oct  9 18:10:44 1997  Doug Evans  <dje@canuck.cygnus.com>

        * gas/sparc/set64.[sd]: `set' doesn't take negative arguments.

Thu Oct  9 12:59:55 1997  Ian Lance Taylor  <ian@cygnus.com>

        * gas/arm/arm7t.d: Update for recent disassembler changes.
        * gas/h8300/ffxx1.d: Likewise.

Wed Oct  8 16:22:50 1997  Doug Evans  <dje@canuck.cygnus.com>

        * gas/sparc/reloc64.[sd]: Add testcases for %hix,%lox.

Wed Oct  8 15:12:35 1997  Ian Lance Taylor  <ian@cygnus.com>

        * gas/sparc/synth.d: Update for recent disassembler changes.
        * gas/sparc/synth64.d: Likewise.

        * gas/mips/beq.s: Add .text to .globl to mark the symbol to as a
        function symbol.
        * gas/mips/jal.s: Likewise.

Tue Oct  7 13:30:30 1997  Doug Evans  <dje@canuck.cygnus.com>

        * gas/sparc/reloc64.[sd]: New testcase.
        * gas/sparc/sparc.exp: Run it.

Sat Oct  4 19:14:24 1997  Ian Lance Taylor  <ian@cygnus.com>

        * gas/ieee-fp/x930509a.exp: Accept m68k listing format.

Fri Oct  3 15:46:05 1997  Ian Lance Taylor  <ian@cygnus.com>

        * gas/ieee-fp/x930509a.exp: Remove setup_xfail; it should now
        work.  Correct for big endian and for tabs in input file.

        * gas/alpha/fp.exp: Check for alpha-*-osf*, not alpha-*-osf1*.
        * gas/alpha/fp.s: Change comment characters from ! to #.

Thu Sep 18 11:17:53 1997  Doug Evans  <dje@canuck.cygnus.com>

        * gas/sparc/splet.d: Update to new objdump output format.
        * gas/sparc/{asi.d,membar.d,prefetch.d,rdpr.d,wrpr.d}: Likewise.
        * gas/sparc/set64.[ds]: New testcase.
        * gas/sparc/splet-2.[ds]: New testcase.
        * gas/sparc/sparc.exp: Run them.

start-sanitize-d30v
Tue Sep 16 15:27:08 1997  Ken Raeburn  <raeburn@cygnus.com>

        Merge changes from Martin Hunt:

        * gas/d30v/inst.s: Add some new tests. 

        * gas/d30v/{inst, opt, reloc}.d: Update results with
        new disassembler changes.

        * gas/d30v/inst.[sd]: Update examples for d*i instructions. 

        * gas/d30v/*.d: Update all test results because
        of new ".s" and ".l" extensions.

        * gas/d30v/inst.[sd]: Correct entry for mulx2h.
        * gas/d30v/opt.[sd]: Correct st2w instruction. 

        * gas/d30v/align.d: Change expected output.

        * gas/d30v/reloc.[sd]: Add test case. 

        * gas/d30v/array.[sd]: New test case.

        * gas/d30v/opt.[sd]: Added more test cases. 

        * gas/d30v/opt.s: Add test cases.
        * gas/d30v/reloc.s: Fix a test case.    
        * gas/d30v/{opt,reloc}.d: Regenerate.

end-sanitize-d30v
start-sanitize-tx19
Mon Sep 15 17:29:08 1997  Gavin Koch  <gavin@cygnus.com>

        * gas/mips/mips.exp: Handle r3900 and r1900.
        * gas/mips/ld-ilocks: New file.

end-sanitize-tx19
Mon Sep  8 14:21:23 1997  Doug Evans  <dje@canuck.cygnus.com>

        * gas/m32r/high-1.[ds]: New testcase.
        * gas/m32r/m32r.exp: Run it.

Mon Aug 25 11:04:24 1997  Doug Evans  <dje@canuck.cygnus.com>

        * gas/m32r/relax-1.[ds]: New testcase.
        * gas/m32r/m32r.exp: Run it.

Thu Aug 14 23:49:49 1997  Doug Evans  <dje@canuck.cygnus.com>

        * gas/arc: New directory
        * gas/arc/{arc.exp,alias.[sd],branch.[sd],flag.[sd],insn3.[sd],j.[sd],
        ld.[sd],math.[sd],sshift.[sd],st.[sd],warn.{exp,s}}: New files.

Wed Aug  6 00:33:30 1997  Ian Lance Taylor  <ian@cygnus.com>

        * config/default.exp: Set AS and GASP to as-new, not as.new.

Tue Aug  5 12:33:23 1997  Ian Lance Taylor  <ian@cygnus.com>

        * config/default.exp: Set NM to nm-new, not nm.new, to match
        recent change in binutils build directory.

Thu Jul 31 15:21:51 1997  Jeffrey A Law  (law@cygnus.com)

        * gas/v850/range.s: New test.
        * gas/v850/basic.exp: Run it.

Tue Jul 29 14:35:02 1997  Jeffrey A Law  (law@cygnus.com)

        * gas/v850/hilo2.s: New test.
        * gas/v850/fepsw.s: New test.
        * gas/v850/basic.exp: Run them.

Tue Jul 15 13:03:17 1997  Doug Evans  <dje@canuck.cygnus.com>

        * gas/m32r/uppercase.[sd]: New testcase.
        * gas/m32r/m32r.exp: New file.

Mon Jun 16 14:32:11 1997  Ian Lance Taylor  <ian@cygnus.com>

        * gas/m68k/pcrel.d: Update for m68k disassembler changes.
        * gas/m68k/operands.d: Likewise.

Mon Jun  2 16:50:03 1997  Nick Clifton  <nickc@cygnus.com>

        * gas/arm/arm.exp: Added changes from armT-970328-branch.

Mon Jun  2 12:09:02 1997  Gavin Koch  <gavin@cygnus.com>

        * gas/mips/mips.exp: The r3900 has interlocks for mul, but
        not div.

Mon Jun  2 12:03:32 1997  Gavin Koch  <gavin@.cygnus.com>

        * gas/mips/mul.{d,s}: End the tests with no-ops. 

Mon Jun  2 11:48:58 1997  Gavin Koch  <gavin@cygnus.com>

        * lib/gas-defs.exp (regexp_diff): Improve messages when one
        file is shorter than the other.

Wed May  7 16:18:30 1997  Manfred Hollstein  <manfred@s-direktnet.de>

        * gas/m88k/init.{s,d}: New checks for proper padding of
        .init sections.
        * gas/m88k/m88.exp: Run them.

        * gas/m68k/t2.d: New file for check of presence of section
        symbols on the m68k-motorola-sysv.
        * gas/m68k/all.exp: Run t2 if [istarget m68*-motorola-sysv].

Wed May  7 16:12:24 1997  Ian Lance Taylor  <ian@cygnus.com>

        * gas/all/gas.exp: Don't run cofftag test for m88k-coff.

        * gas/mips/lifloat.s: Update for recent changes to floating point
        handling.
        * gas/mips/lif-empic.d, gas/mips/lif-svr4pic.d: Likewise.
        * gas/mips/lif-xgot.d, gas/mips/lifloat.d: Likewise.

        * gas/mips/mips.exp: Handle Irix 6 like Irix 5.

Sat Apr 19 23:16:35 1997  Niklas Hallqvist  <niklas@petra.appli.se>

        * gas/mips/mips.exp: Handle OpenBSD like NetBSD.

start-sanitize-d30v
Wed Apr 16 12:20:24 1997  Martin Hunt  <hunt@cygnus.com>

        * gas/d30v/d30.exp: Add optimizer test case.
        * gas/d30v/opt.s: Add conditional compilation tests.
        * gas/d30v/opt.d: Rebuild.

end-sanitize-d30v       
Tue Apr 15 18:10:01 1997  Gavin Koch  <gavin@cygnus.com>

        * gas/mips/{delay.d,nodelay.d}: added.

Mon Apr  7 12:57:45 1997  Doug Evans  <dje@canuck.cygnus.com>

        * gas/m32r/allinsn.d: Update to new objdump output style.

Fri Apr  4 13:19:39 1997  Ian Lance Taylor  <ian@cygnus.com>

        * gas/all/float.s: Put a tab before .text, to keep the PA happy.

        * gas/arm/arm.exp: Only run inst and arm7t on targets which can
        handle -EL.  Add setup_xfail for thumb.

        * gas/h8300/ffxx1.d: Don't fail if BFD is 64 bits.

Thu Apr  3 18:26:56 1997  Doug Evans  <dje@canuck.cygnus.com>

        * gas/m32r/allinsn.{exp,s.d}: New testcases.

start-sanitize-d30v
Thu Mar 27 00:42:28 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>

        * gas/d30v/d30.exp: Add test case reloc.
        * gas/d30v/reloc.[sd]: New files to test relocations.

end-sanitize-d30v       
Sat Mar 15 17:21:46 1997  Ian Lance Taylor  <ian@cygnus.com>

        * gas/arm/inst.d: Update for disassembler changes.
        * gas/arm/arm7t.d: Likewise.

Tue Mar 11 13:31:56 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>

        * gas/m68k/op68000.d: Update for recent assembler bug fix.

Wed Mar  5 13:01:24 1997  Jeffrey A Law  (law@cygnus.com)

        * gas/all/gas.exp: xfail a couple tests for the mn10300.

start-sanitize-tic80
Mon Mar  3 11:41:00 1997  Fred Fish  <fnf@cygnus.com>

        * gas/tic80/{add.d, float.d, regops2.d, relocs1.d, relocs1b.d,
        relocs2.d, relocs2b.d}: Adjust to objdump format tweaks.

Thu Feb 27 15:21:46 1997  Fred Fish  <fnf@cygnus.com>

        * gas/tic80/{align.d, align.lst, align.s} New test for the
        ".align" pseudop.
        * gas/tic80/tic80.exp: Run the align test.
        
Wed Feb 26 20:36:46 1997  Fred Fish  <fnf@cygnus.com>

        * gas/tic80/{float.d, float.lst, float.s}: New tests for
        simple floating point operands.
        * gas/tic80/tic80.exp: Run the float test.

Wed Feb 26 15:16:04 1997  Fred Fish  <fnf@cygnus.com>

        * gas/tic80/{regops2.d, regops2.lst, regops2.s, regops3.d,
        regops3.lst, regops3.s, regops4.d, regops4.lst, regops4.s}:
        New tests for :m and :s operand modifiers.
        * gas/tic80/tic80.exp: Run the regops2, regops3, and regops4 tests.

end-sanitize-tic80
Tue Feb 25 13:45:55 1997  Ian Lance Taylor  <ian@cygnus.com>

        * gas/macros/semi.s: Force the final alignment to use a fill value
        of 0.

        * gas/all/cond.s, gas/all/cond.d: New test.
        * gas/all/gas.exp: Run it.

Mon Feb 24 10:52:12 1997  Bob Manson  <manson@charmed.cygnus.com>

        * lib/gas-defs.exp(gas_init): Added new parameter for script
        name.

start-sanitize-tic80
Mon Feb 24 10:40:28 1997  Fred Fish  <fnf@cygnus.com>

        * gas/tic80/{add.d, bitnum.d, ccode.d, cregops.d, endmask.d,
        regops.d, relocs1.d, 
        (relocs1.c): Add file for reference.
        (relocs1b.d): Split reloc table contents test to different test file.
        (relocs2.c): Add test that uses various types (char, short, int, ...) of
        static and global variables with data shuffling to generate lots of ld/st
        instructions for the different types.
        (relocs2.d): New file, expected code for relocs2 test.
        (relocs2.lst): New file, TI assembler listing for reference.
        (relocs2.s): New file, assembly source for relocs2 test.
        (relocs2b.d): New file, expected reloc table contents for relocs2 test.
        (tic80.exp): Run the relocs1b, relocs2, and relocs2b tests.

end-sanitize-tic80
Sun Feb 23 17:54:00 1997  Dawn Perchik  <dawn@cygnus.com>

        * gas/all/itbl-test.c(main): Update function calls.
        Remove parameters from itbl_get_reg_val and
        change itbl_get_insn_name to itbl_get_field.

Sun Feb 23 17:22:00 1997  Dawn Perchik  <dawn@cygnus.com>

        * gas/mips/itbl: Add comments.
        * gas/mips/itbl.s: Add comments.  Prefix register names with $.
        * gas/all/itbl: Generic table for testing for itbl support.
        * gas/all/itbl.s: Generic assembly for testing for itbl support.
        * gas/mips/itbl-test.c: Moved to gas/all.
        * gas/all/itbl-test.c: Moved from gas/mips.

start-sanitize-tic80
Sat Feb 22 20:24:23 1997  Fred Fish  <fnf@cygnus.com>

        * gas/tic80/{add.lst, bitnum.lst, ccode.lst, cregops.lst,
        endmask.lst, regops.lst}: Remove ^M's from end of lines.
        * gas/tic80/bitnum.s: Add comment to each line showing value
        that symbolic BITNUM assembles to.  Add coverage for raw
        numeric values for the BITNUM operand.
        * gas/tic80/bitnum.d: Update due to bitnum.s changes.
        * gas/tic80/regops.d: Update due to opcode library additions
        of floating point test BITNUM values that are ambiguous with
        the integral ones.
        * gas/tic80/relocs1.s: New test case that tests simple relocs.
        * gas/tic80/relocs1.d: Expected output for above.
        * gas/tic80/relocs1.lst: TI assembler listing for above.
        * gas/tic80/tic80.exp: Add relocs1 test.

end-sanitize-tic80
start-sanitize-d30v
Fri Feb 21 14:23:14 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>

        * gas/d30v/{align.d, align.s, d30.exp, guard.d, guard.s,
        inst.d, inst.s, opt.d, opt.s}: Test files for D30V.

end-sanitize-d30v       
Wed Feb 19 00:55:29 1997  Ian Lance Taylor  <ian@cygnus.com>

        * gas/macros/semi.s, gas/macros/semi.d: New test.
        * gas/macros/macros.exp: Run it.
        * gas/mri/semi.s, gas/mri/semi.d: New test.
        * gas/mri/mri.exp: Run it.

Tue Feb 18 13:37:06 1997  Jeffrey A Law  (law@cygnus.com)

        * gas/hppa/unsorted/unsorted.exp (align4 tests): Tweak expected
        output.
        
Fri Feb 14 17:56:27 1997  Ian Lance Taylor  <ian@cygnus.com>

        * gas/all/align.d, gas/all/align.s: New test.
        * gas/all/gas.exp: Run it.

Thu Feb 13 14:44:05 1997  Ian Lance Taylor  <ian@cygnus.com>

        * gas/mips/mips16.d: Correct PC relative instruction bytes.

Wed Feb 12 12:33:08 1997  Ian Lance Taylor  <ian@cygnus.com>

        * gas/mips/lif-svr4pic.d: Pass -EB when running the assembler.
        * gas/mips/lif-xgot.d: Likewise.
        * gas/mips/ulh-svr4pic.d: Likewise.
        * gas/mips/ulh-xgot.d: Likewise.

        * gas/mips/mips16.d: Update for yet another change in disassembly
        output (this one is spacing only).

start-sanitize-tic80
Tue Feb 11 14:45:39 1997  Fred Fish  <fnf@cygnus.com>

        * gas/tic80/{add.d, add.lst, add.s, bitnum.d, bitnum.lst, bitnum.s,
        ccode.d, ccode.lst, ccode.s, cregops.d, cregops.lst, cregops.s,
        endmask.d, endmask.lst, endmask.s, regops.d, regops.lst, regops.s,
        tic80.exp}: New files for TIc80 test cases.

end-sanitize-tic80
Tue Feb 11 15:46:27 1997  Ian Lance Taylor  <ian@cygnus.com>

        * gas/mips/mips16.d: Update for change in disassembly output.

Mon Feb 10 22:24:00 1997  Dawn Perchik  <dawn@cygnus.com>

        * gas/mips/itbl-test.c: Add copyright message and fix indentation.   

Mon Feb 10 17:54:00 1997  Dawn Perchik  <dawn@cygnus.com>

        * gas/mips/itbl-test.c: New file.  Stand-alone assembler and 
        dissassembler for itbl support.

Mon Feb 10 17:20:00 1997  Dawn Perchik  <dawn@cygnus.com>

        * gas/mips/itbl: New file.  Instruction Spec for testing --itbl
        option.
        * gas/mips/itbl.s: New file.  Assembly with ne2w instructions
        specified in itbl.

Fri Feb  7 16:42:53 1997  Bob Manson  <manson@charmed.cygnus.com>

        * gasp/gasp.exp: Use prune_warnings instead of prune_system_crud.
        * lib/gas-defs.exp: Ditto.

Mon Feb  3 15:46:05 1997  Ian Lance Taylor  <ian@cygnus.com>

        * gas/arm/inst.d, gas/arm/arm7t.d: Pass --prefix-addresses to
        objdump.  Update for current relocation printing style.

Thu Jan 30 11:57:33 1997  Ian Lance Taylor  <ian@cygnus.com>

        * gas/mips/mips16.d: Update for disassembler changes.

Thu Jan 23 03:15:06 1997  Angela Marie Thomas (angela@cygnus.com)

        * gas/mips/mips.exp: set ilocks for all 4100/4300

Thu Jan  2 16:49:17 1997  Ian Lance Taylor  <ian@cygnus.com>

        * gas/mips/mips16.s, gas/mips/mips16.d: New test.
        * gas/mips/mips.exp: Run mips16 test.

        * gas/mips/mips.exp: Run dli test unconditionally.
        * gas/mips/dli.s: Add text symbol.  Add nops to round to 16 byte
        boundary.
        * gas/mips/dli.d: Corresponding changes.

Tue Dec 31 13:03:16 1996  Ian Lance Taylor  <ian@cygnus.com>

        * gas/sparc/synth.d: Use --prefix-addresses for objdump.
        * gas/sparc/synth64.d: Likewise.

Tue Dec 24 16:30:58 1996  Angela Marie Thomas (angela@cygnus.com)

        * gas/mips/*-ilocks.d: Fix regexps to resemble disassembled output.

Fri Dec 13 13:05:33 1996  Ian Lance Taylor  <ian@cygnus.com>

        * gas/mips/*.[sd]: Add explicit nops, sometimes controlled by
        .ifdef, to accomodate change to avoid default alignment on
        embedded systems.

Wed Dec 11 09:26:01 1996  Jeffrey A Law  (law@cygnus.com)

        * gas/mn10200/basic.exp (do_movb): Fix bit pattern for
        "movb dm,(an)".

Tue Dec 10 13:01:05 1996  Jeffrey A Law  (law@cygnus.com)

        * gas/mn10300/basic.exp: Update after endianness changes to
        the assembler.

        * gas/mn10200/{mov1.s,mov2.s,mov3.s,mov4.s,movx.s}: New tests.
        * gas/mn10200/{movb.s, movbu.s}: Likewise.
        * gas/mn10200/basic.exp: Run them.

Mon Dec  9 17:08:38 1996  Jeffrey A Law  (law@cygnus.com)

        * gas/mn10200/*.s: New tests for the mn10200 assembler.
        * gas/mn10200/basic.exp: Run them.

Fri Dec  6 15:35:04 1996  Jeffrey A Law  (law@cygnus.com)

        * gas/mn10300/*.s: Remove '$' register prefixing.

Mon Nov 25 16:35:33 1996  Doug Evans  <dje@canuck.cygnus.com>

        * gas/sparc-solaris/addend.exp: Fix patterns, you can't assume
        \r will be present.

Mon Nov 25 13:45:02 1996  Ian Lance Taylor  <ian@cygnus.com>

        * gas/m68k/*.d: Update for disassembler changes.
        * gas/mri/*.d: Likewise.

Mon Nov 25 11:38:37 1996  Jeffrey A Law  (law@cygnus.com)

        * gas/mn10300/*.s: Use '$' as register prefix for
        all register operands.

Thu Nov 21 11:52:54 1996  Jeffrey A Law  (law@cygnus.com)

        * gas/all/gas.exp: xfail a couple tests for the mn10300.

Wed Nov 20 11:31:41 1996  Jeffrey A Law  (law@cygnus.com)

        * gas/mn10300/other.s: Update for correct syntax on a
        few instructions (those with register lists).
        * gas/mn10300/basic.exp: Corresponding changes.

Tue Nov 19 13:36:57 1996  Jeffrey A Law  (law@cygnus.com)

        * gas/mn10300/movm.s: Update for correct syntax.
        * gas/mn10300/basic.exp: Update expected movm bit patterns.

Fri Nov 15 13:57:42 1996  Jeffrey A Law  (law@cygnus.com)

        * gas/mn10300/other.s: Put parens around register
        argument in calls and jmp instructions.

Wed Nov 13 13:16:04 1996  Jeffrey A Law  (law@cygnus.com)

        * gas/h8300/ffxx1.d: Update for recent disassembler changes.

Mon Nov 11 16:03:24 1996  Jeffrey A Law  (law@cygnus.com)

        * gas/hppa/reloc/reloc.exp: Pass "--prefix-addresses" to objdump
        as needed.
        * gas/hppa/unsorted/unsorted.exp: Likewise.

Thu Nov  7 00:27:52 1996  Jeffrey A Law  (law@cygnus.com)

        * gas/mn10300/basic.exp: Check opcode insertion for
        extended instructions.
        * gas/mn10300/extend.s: Tweak constants for better
        testsuite coverage.

Wed Nov  6 13:50:07 1996  Jeffrey A Law  (law@cygnus.com)

        * gas/mn10300/basic.exp: Test insertion of operands
        into call and jmp instructions with 32bit offsets.
        Fix typo in bit test patterns.
        * gas/mn10300/other.s: Tweak constants to improve
        testsuite coverage.

        * gas/mn10300/basic.exp: Test insertion of 32bit operand
        in calls, btst, bclr & bset instructions.

        * gas/mn10300/*.s: Tweak constants in 32bit insns for
        better testing coverage.
        * gas/mn10300/basic.exp: Test insertion of most 32bit
        operands.

Tue Nov  5 13:33:12 1996  Jeffrey A Law  (law@cygnus.com)

        * gas/mn10300/basic.exp: Check bit patterns for indexed mov,
        movbu, movhu instructions.  Check bit patterns for more bit
        operations.  Check bit patterns for various 16bit call, retf
        and ret instructions.
        * gas/mn10300/other.s: Update operands for better test coverage.

Mon Nov  4 12:55:11 1996  Jeffrey A Law  (law@cygnus.com)

        * gas/mn10300/basic.exp: Check bit patterns for a couple more
        mov and cmp instructions.

Tue Oct 29 17:05:43 1996  Ian Lance Taylor  <ian@cygnus.com>

        * gas/mips/*.d: Update for disassembler changes.

Wed Oct 16 22:39:50 1996  Jeffrey A Law  (law@cygnus.com)

        * gas/v850/reloc.s: New tests.
        * gas/v850/basic.exp: Run them.

Mon Oct 14 13:52:55 1996  Ian Lance Taylor  <ian@cygnus.com>

        * gas/mips: Add symbols to several testsuites, since the ELF
        assembler now always builds a symbol table, which means that
        objdump will no longer report `No symbols in FILE'.  Change the
        expected output accordingly.

Thu Oct 10 13:11:48 1996  Jeffrey A Law  (law@cygnus.com)

        * gas/mn10300/basic.exp: Check bit patterns for instructions
        with a single 8bit or 16bit immediate operand.

        * gas/mn10300/basic.exp: Check bit patterns for many
        instructions.  Add missing test in do_mov1.
        * gas/mn10300/mov1.s: Add missing test.

Wed Oct  9 14:15:18 1996  Jeffrey A Law  (law@cygnus.com)

        * gas/mn10300/{add.s, bcc.s, bit.s, cmp.s, ext.s}: New tests.
        * gas/mn10300/{extend.s logical.s, loop.s, mov1.s}: Likewise.
        * gas/mn10300/{mov2.s, mov3.s, mov4.s, movbu.s}: Likewise.
        * gas/mn10300/{movhu.s, movm.s, muldiv.s, other.s}: Likewise.
        * gas/mn10300/{shift.s, sub.s}: Likewise.
        * gas/mn10300/basic.exp: Run them.

Thu Oct  3 09:57:03 1996  Jeffrey A Law  (law@cygnus.com)

        * gas/mn10200, gas/mn10300: New directories for Matsushita
        mn10200 and mn10300 tests.

Tue Oct  1 15:38:28 1996  Ian Lance Taylor  <ian@cygnus.com>

        * lib/gas-defs.exp (gas_version): Fix for current version
        printing.

Sun Sep 29 07:55:58 1996  Doug Evans  <dje@canuck.cygnus.com>

        * gas/sparc/splet.d: Fix typo in cpusha result.

Mon Sep 23 12:33:31 1996  Ian Lance Taylor  <ian@cygnus.com>

        * gas/m68k/fmoveml.s, gas/m68k/fmoveml.d: Add tests for fmovemx.

Wed Sep 18 12:14:06 1996  Ian Lance Taylor  <ian@cygnus.com>

        * gas/all/cofftag.s: Use .p2align rather than .align.

Fri Sep 13 15:28:04 1996  Jeffrey A Law  (law@cygnus.com)

        * gas/h8300/macs.s: Add "stmac" instructions.
        * gas/h8300/basic.exp: Test them.

Thu Sep 12 10:28:44 1996  James G. Smith  <jsmith@cygnus.co.uk>

        * gas/arm/thumb.s (back): Check assembly of Thumb BL.

Mon Sep  9 14:37:00 1996  Ian Lance Taylor  <ian@cygnus.com>

        * gas/mips/mips4.s, gas/mips/mips4.d: Use $fccN for condition code
        registers.

Fri Sep  6 18:23:54 1996  James G. Smith  <jsmith@cygnus.co.uk>

        * gas/mips/dli.{s,d}: More test cases added.

Wed Sep  4 11:47:29 1996  James G. Smith  <jsmith@cygnus.co.uk>

        * gas/mips/mips.exp: Add check for dli macro instruction.
        * gas/mips/dli.{s,d}: Added.

Sat Aug 31 01:25:03 1996  Jeffrey A Law  (law@cygnus.com)

        * gas/v850/basic.exp (do_mem): Check bit patterns for short
        load/store instructions.  Remove xfails for short load/store
        instructions.
        * gas/v850/mem.s: Offsets for short load/store operands
        are unsigned.

        * gas/v850/basic.exp (do_branch): Check offsets in branch insns.
        (do_jumps): Likewise.
        
Fri Aug 30 00:37:55 1996  Jeffrey A Law  (law@cygnus.com)

        * gas/v850/misc.s: Tweak register numbers for better testing.
        * gas/v850/basic.exp (do_misc): Corresponding changes.

        * gas/v850/hilo.s: New testfile.
        * gas/v850/basic.exp: Run hilo tests.

Thu Aug 29 11:32:23 1996  James G. Smith  <jsmith@cygnus.co.uk>

        * gas/arm/arm7t.d: Explicitly force little-endian assembly.

Fri Aug 23 11:02:55 1996  Jeffrey A Law  (law@cygnus.com)

        * gas/v850/basic.exp (do_move): Test instruction bit patterns.
        * gas/v850/move.s: Tweak constants for better testing.

        * gas/v850/basic.exp (do_mem): Test instruction bit patterns.
        xfail sst and sld tests.
        (do_mov): Remove bogus xfail.
        * gas/v850/mem.s: sst and sld instructions can only index from
        "ep" register.

        * gas/v850/basic.exp (do_logical): Test instruction bit patterns.
        Update addresses.
        * gas/v850/logical.s: Tweak constants for better testing.

        * gas/v850/basic.exp (do_jump): Test instruction bit patterns,
        but not displacements (yet).

        * gas/v850/basic.exp (do_compare): Test instruction bit patterns.

        * gas/v850/basic.exp (do_branch): Test instruction bit patterns,
        but not displacements (yet).
        
        * gas/v850/basic.exp (do_bit): Test instruction bit patterns.

        * gas/v850/basic.exp (do_arith): Test instruction bit patterns. 
        * gas/v850/arith.s: Tweak constants for better testing.

        * gas/v850/basic.exp (do_misc): No longer expect failures
        assembling "ldsr" and "stsr" opcodes.
        * gas/v850/misc.s: Re-enable assembling of "ldsr" and "stsr"
        opcodes.

        * gas/v850/basic.exp (do_misc): No longer expect failures
        assembling "trap" opcodes.
        * gas/v850/misc.s: Re-enable assembling of "trap" opcodes.

        * gas/v850: New directory with v850 tests.

Fri Aug 16 00:19:10 1996  Jeffrey A Law  (law@cygnus.com)

        * gas/hppa/basic/purge.s: Use "%sr4" on pitlb, pitlbe
        fic and fice instructions to test 3bit space identifiers.
        * gas/hppa/basic/system.s: Similarly for iitlba and
        iitlbp.
        * gas/hppa/basic/basic.exp: Corresponding changes.

Thu Aug 15 16:25:05 1996  James G. Smith  <jsmith@cygnus.co.uk>

        * gas/arm/arm.exp: Change inst.s test to check objdump.
        * gas/arm/inst.d: Added.
        
Thu Aug 15 16:06:02 1996  James G. Smith  <jsmith@cygnus.co.uk>

        * gas/arm/thumb.s: Added.
        * gas/arm/immed.s: Added.
        * gas/arm/arch4t.s: Added.
        * gas/arm/arm.exp: Updated to run the new tests.

Tue Aug  6 11:06:29 1996  Jeffrey A Law  (law@cygnus.com)

        * gas/h8300/misch.s: Reenable "eepmov.w" test.
        * gas/h8300/miscs.s: Likewise.
        * gas/h8300/h8300.exp: Check for correct assembly of "eepmov.w"
        on the H8/300H and H8/S.  Don't expect it to fail.

Wed Jul 31 10:57:44 1996  Doug Evans  <dje@canuck.cygnus.com>

        * gas/sparc/asi.s: Update ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.

Wed Jul 31 15:55:12 1996  James G. Smith  <jsmith@cygnus.co.uk>

        * gas/arm/arm7t.s: Added.
        * gas/arm/arm7t.d: Added.
        * gas/arm/arm.exp: Updated to run the new test.

Mon Jul  8 14:27:39 1996  Ian Lance Taylor  <ian@cygnus.com>

        * gas/m68k/pcrel.d: Rename from schwab.d.
        * gas/m68k/pcrel.s: Rename from schwab.s.

Mon Jul  8 14:23:26 1996  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>

        * gas/m68k/schwab.d: Correct for ELF format.
        * gas/m68k/all.exp: Run "schwab" test for all targets.

Thu Jul  4 14:23:36 1996  Ian Lance Taylor  <ian@cygnus.com>

        Avoid DOS file naming problems:
        * gas/h8300/branch.s: Rename from branches.s.
        * gas/h8300/branchh.s: Rename from branchesh.s.
        * gas/h8300/branchs.s: Rename from branchess.s.
        * gas/h8300/rotsh.s: Rename from rotshift.s.
        * gas/h8300/rotshh.s: Rename from rotshifth.s.
        * gas/h8300/rotshs.s: Rename from rotshifts.s.
        * gas/h8300/h8300.exp: Corresponding changes.

Thu Jul  4 14:01:46 1996  James G. Smith  <jsmith@cygnus.co.uk>

        * gas/mips/mips.exp: Add new tests for processors with interlocks
        on div and mul.
        * gas/mips/div-ilocks.d: Added.
        * gas/mips/mul-ilocks.d: Added.
        
Wed Jul  3 14:20:04 1996  Ian Lance Taylor  <ian@cygnus.com>

        * gas/all/gas.exp: Remove setup_xfail for h8300*-*-* for two tests
        which now pass.
        * gas/h8300/h8300.exp: Fix regexp of mov32bug test to work on a 64
        bit host.

Sat Jun 29 18:21:51 1996  Ian Lance Taylor  <ian@cygnus.com>

        * gas/all/gas.exp: Add setup_xfail for vax*-*-vms* for 930509a
        test.
        * gas/vax/quad.exp: Expect a nop after the movq.

Tue Jun 18 12:39:49 1996  Jeffrey A. Law  <law@rtl.cygnus.com>

        * gas/h8300/cbranchh.s: Switch into h8300h mode.
        * gas/h8300/h8300.exp (H8/300H misc tests): Fix test names.

        * gas/h8300/{addsubs.s,bitops1s.s,bitops2s.s}: New tests for the
        H8/S.
        * gas/h8300/{bitops3.s,bitops4.s,cbranchs.s,logicals.s}: Likewise.
        * gas/h8300/{branchess.s,compares.s,macs.s,decimals.s}: Likewise.
        * gas/h8300/{incdecs.s,divmuls.s,miscs.s,multiples.s}: Likewise.
        * gas/h8300/{movbs.s,movws.s,movls.s,pushpops.s}: Likewise.
        * gas/h8300/{rotshifts.s,extends.s}: Likewise.
        * gas/h8300/h8300.exp: Run them.

Mon Jun 10 14:14:40 1996  Ian Lance Taylor  <ian@cygnus.com>

        * gas/all/cofftag.s, gas/all/cofftag.d: New test for COFF enum tag
        with the same name as a global variable.
        * gas/all/gas.exp: Run cofftag test for any COFF target.

Thu Jun  6 12:30:05 1996  Ian Lance Taylor  <ian@cygnus.com>

        * gas/m68k/all.exp: Pass -m68020 when assembling the disperr.s
        test.

Fri May 31 10:11:13 1996  Jeffrey A Law  (law@cygnus.com)

        * gas/h8300/h8300.exp: Fix add.l test for H8/300H.

Wed May 29 16:35:43 1996  Ian Lance Taylor  <ian@cygnus.com>

        * gas/mips/jal-xgot.d: Correct for 64 bit output.

Thu Apr 25 19:31:59 1996  Doug Evans  <dje@canuck.cygnus.com>

        * gas/sparc/sparc.exp: Only run sparclet tests if sparclet.

Wed Apr 24 17:06:18 1996  Ian Lance Taylor  <ian@cygnus.com>

        * gas/m68k/op68000.d: Add statements now caught by gas.

Mon Apr 22 16:45:12 1996  Doug Evans  <dje@canuck.cygnus.com>

        * gas/sparc/splet.[ds]: New tests for sparclet extensions.
        * gas/sparc/sparc.exp: Run them.

Mon Apr 15 17:25:18 1996  Ian Lance Taylor  <ian@cygnus.com>

        * gas/mips/la.d: Updated for April 5 MIPS assembler changes.
        * gas/mips/lb.d, gas/mips/ld.d, gas/mips/sb.d: Likewise.
        * gas/mips/uld.d, gas/mips/ulh.d, gas/mips/ulw.d: Likewise.
        * gas/mips/usd.d, gas/mips/ush.d, gas/mips/usw.d: Likewise.

Wed Apr 10 14:27:51 1996  Jeffrey A Law  (law@cygnus.com)

        * gas/h8300/mov32bug.s: New test.
        * gas/h8300/h8300.exp: Run it.

Fri Apr  5 10:13:28 1996  Jeffrey A Law  (law@cygnus.com)

        * gas/h8300/{addsubh.s,bitops1h.s,bitops2h.s}: New h8300h tests.
        * gas/h8300/{bitops3h.s,bitops4h.s,branchesh.s}: New h8300h tests.
        * gas/h8300/{cbranchh.s,compareh.s,decimalh.s}: New h8300h tests.
        * gas/h8300/{divmulh.s,incdech.s,logicalh.s}: New h8300h tests.
        * gas/h8300/{misch.s,movbh.s,movwh.s}: New h8300h tests.
        * gas/h8300/{pushpoph.s,rotshifth.s}: New h8300h tests.
        * gas/h8300/h8300.exp: Run them.

        * gas/h8300/{movb.s,movw.s}: Correct predecrement syntax.

        * gas/h8300/h8300.exp: Fix typos in bitops4 and movb tests.

        * gas/h8300/{addsub.s,bitops1.s,bitops2.s}: New h8300 tests.
        * gas/h8300/{bitops3.s,bitops4.s,branches.s}: New h8300 tests.
        * gas/h8300/{cbranch.s,compare.s,decimal.s}: New h8300 tests.
        * gas/h8300/{divmul.s,incdec.s,logical.s}: New h8300 tests.
        * gas/h8300/{misc.s,movb.s,movw.s}: New h8300 tests.
        * gas/h8300/{pushpop.s,rotshift.s}: New h8300 tests.
        * gas/h8300/h8300.exp: Run them.

Fri Mar 15 17:16:24 1996  Ian Lance Taylor  <ian@cygnus.com>

        * gas/sparc/synth.d: Don't require sparc in the file format, since
        it won't be there on SunOS.

Thu Mar  7 14:51:23 1996  Doug Evans  <dje@charmed.cygnus.com>

        * gas/sparc/synth.[ds]: New testcase.
        * gas/sparc/sparc.exp: Run it.

Fri Mar  1 12:01:48 1996  Jeffrey A Law  (law@cygnus.com)

        * gas/all/gas.exp: xfail difference of two undefined symbols
        and difference of forward references for the h8300.

Thu Feb 22 16:40:31 1996  Ian Lance Taylor  <ian@cygnus.com>

        * gas/mips/lb-xgot.d: Correct.

Mon Feb 19 02:43:36 1996  Doug Evans  <dje@charmed.cygnus.com>

        * gas/sparc/{asi,membar,prefetch,rdpr,synth64,wrpr}.d: Pass -Av9
        to gas.
        * gas/sparc/addend.exp: Execute for any sparc cpu.
        * gas/sparc/{mismatch.exp,mism-1.s}: New test.

Wed Feb 14 13:49:59 1996  Ian Lance Taylor  <ian@cygnus.com>

        * gas/mips/jal-xgot.d, gas/mips/la-xgot.d: New tests.
        * gas/mips/lb-xgot.d, gas/mips/ld-xgot.d: New tests.
        * gas/mips/lif-xgot.d, gas/mips/ulh-xgot.d: New tests.
        * gas/mips/mips.exp: Run new tests if svr4pic.

Sat Jan 27 13:27:45 1996  Doug Evans  <dje@charmed.cygnus.com>

        * lib/gas-dg.exp (gas-dg-test): Delete default_flags and libs args.

Fri Jan 26 14:24:01 1996  Jeffrey A Law  (law@cygnus.com)

        * gas/hppa/unsorted/unsorted.exp: Update for objdump changes.

Wed Jan 10 12:40:31 1996  Ian Lance Taylor  <ian@cygnus.com>

        * gas/mips/*.d: Update for changes to disassembler.

Wed Jan  3 22:59:53 1996  Ian Lance Taylor  <ian@cygnus.com>

        * gas/mips/ulh-svr4pic.d: Update for tc-mips.c load_address
        change.

Fri Nov 17 10:32:25 1995  Ian Lance Taylor  <ian@cygnus.com>

        * gas/mri/immconst.d: New test.
        * gas/mri/mri.exp: Run it.
        * gas/mri/constants.s: Test immediate constants.
        * gas/mri/constants.d: Corresponding change.

        * gas/m68k/link.s: Add nop to pad to eight byte boundary.
        * gas/m68k/link.d: Corresponding change.

Sun Nov 12 21:28:11 1995  Jeffrey A Law  (law@cygnus.com)

        * gas/hppa/unsorted/brlenbug.s: New test.
        * gas/hppa/unsorted/unsorted.exp: Run it.

Sun Nov  5 12:49:27 1995  Ian Lance Taylor  <ian@cygnus.com>

        * gas/mips/beq.s: Declare text_label global.
        * gas/mips/jal.s: Likewise.

Fri Nov  3 12:35:07 1995  Ian Lance Taylor  <ian@cygnus.com>

        * gas/m68k/link.s: Use "&" instead of "#" for immediate values.

        * gas/m68k/fmoveml.s, gas/m68k/fmoveml.d: New test.
        * gas/m68k/all.exp: Run it.

Thu Nov  2 23:11:05 1995  Ian Lance Taylor  <ian@cygnus.com>

        * gas/m68k/link.s, gas/m68k/link.d: New test.
        * gas/m68k/all.exp: Run it.

Tue Oct 24 10:57:20 1995  Jeffrey A Law  (law@cygnus.com)

        * gas/hppa/basic/basic.exp: Test lci and syncdma instructions.
        * gas/hppa/basic/system.s: Corresponding changes.

Fri Oct  6 17:13:35 1995  Ken Raeburn  <raeburn@cygnus.com>

        * gas/m68k/operands.d: Don't require a fixed number of leading
        zeros in any number.

        * gas/m68k/operands.s, gas/m68k/bitfield.s: Use "&" instead of "#"
        for immediate values.

Fri Oct  6 10:54:13 1995  Doug Evans  <dje@canuck.cygnus.com>

        * gas/arm/arm.exp: Renamed from gas.exp.
        * gas/arm/le-fpconst.[sd]: New testcase.

Fri Sep 29 15:12:10 1995  Ian Lance Taylor  <ian@cygnus.com>

        * gas/mri/mri.exp: Only run tests for m68k target.

Mon Sep 25 12:31:46 1995  Ian Lance Taylor  <ian@cygnus.com>

        * gas/mri/mri.exp: Add setup_xfail for arm*-*-* for constants
        test.

Thu Sep 21 01:26:08 1995  Jeff Law  (law@snake.cs.utah.edu)

        * gas/sh/fp.s (fmac): Update for new assembly syntax.

Mon Sep 18 14:04:34 1995  Ian Lance Taylor  <ian@cygnus.com>

        * lib/gas-defs.exp (gas_run): Call prune_system_crud.
        (run_dump_test, objdump): Likewise.

Thu Sep 14 13:10:10 1995  Doug Evans  <dje@canuck.cygnus.com>

        * gas/sparc/{wrdr.[ds],rdpr.[ds]}: New tests.
        * gas/sparc/sparc.exp: Run them.

Wed Sep 13 16:35:51 1995  Ian Lance Taylor  <ian@cygnus.com>

        * Makefile.in, configure.in: Remove; the testsuite is now run
        directly from the gas Makefile.

Mon Sep 11 11:44:23 1995  Ian Lance Taylor  <ian@cygnus.com>

        * gas/mri/empty.s: New file.
        * gas/mri/mri.exp: Test assembling empty.s.
        * gas/mri/comment.s: Add a couple more comment variants.

        * gas/mri/mri.exp: Add xfail for the expr test for all hppa
        targets.

Wed Sep  6 21:39:23 1995  Ian Lance Taylor  <ian@cygnus.com>

        * gas/mri/comment.s, gas/mri/comment.d: New test.
        * gas/mri/mri.exp: Run it.
        * gas/mri/expr.s: Remove whitespace in operand field.
        * gas/mri/for.s: Add comments for further testing.
        * gas/macros/test2.s: Put in an upper case ELSE to test case
        insensitivity.

Wed Aug 30 16:12:03 1995  Doug Evans  <dje@canuck.cygnus.com>

        * gas/sparc/{prefetch.[ds],synth64.[ds]}: New tests.

Tue Aug 29 18:59:33 1995  Doug Evans  <dje@canuck.cygnus.com>

        * gas/sparc/sparc.exp: New file.
        * gas/sparc/{asi.[ds],membar.[ds]}: New tests.

Mon Aug 21 14:39:29 1995  Ian Lance Taylor  <ian@cygnus.com>

        * gas/macros/*: New tests for macros.

        * gas/mri/common.s: Use data, not .data.

        * gasp/pl3.out: Update for changes in commented source output when
        LOCAL is used.

Sat Aug 19 17:36:17 1995  Ian Lance Taylor  <ian@cygnus.com>

        * gasp/gasp.exp (gasp_test): Call prune_system_crud on the output
        of diff.
        * lib/gas-defs.exp: Define prune_system_crud if it is not already
        defined.

Fri Aug 18 11:09:38 1995  Ian Lance Taylor  <ian@cygnus.com>

        * gasp/mri/*.out: Use ;, not !, for the comment character.

Wed Aug 16 12:24:12 1995  Ian Lance Taylor  <ian@cygnus.com>

        * gas/mri/mri.exp: Change hppa*-*-* expected failures to only
        expect failure for targets which use SOM.

        * lib/gas-defs.exp (run_dump_test): If the program to run does not
        exist, mark the test as untested.

        * gas/mri/mri.exp: Add setup_xfail for i960 b.out targets for
        common test.

        * lib/gas-defs.exp (run_dump_test): Name the output file dump.o,
        rather than using an implicit a.out.

        * gas/mri/for.s: Add nop to round out to four byte boundary.
        * gas/mri/repeat.s: Likewise.
        * gas/mri/while.s: Likewise.
        * gas/mri/for.d: Expected added nop.
        * gas/mri/repeat.d: Likewise.
        * gas/mri/while.d: Likewise.

        * gas/mips/*.d: Change all test names to say MIPS.

Tue Aug 15 15:42:33 1995  Ian Lance Taylor  <ian@cygnus.com>

        * gas/mri/for.d, gas/mri/for.s: New test.
        * gas/mri/if.d, gas/mri/if.s: New test.
        * gas/mri/repeat.d, gas/mri/repeat.s: New test.
        * gas/mri/while.d, gas/mri/while.s: New test.
        * gas/mri/mri.exp: Run the new tests.

Mon Aug 14 16:03:07 1995  Ian Lance Taylor  <ian@cygnus.com>

        * gas/mri/expr.d: Permit leading zeroes, in case we're using a
        64-bit BFD.

        * gasp/mri/*: New tests.
        * gasp/gasp.exp: Run them.  Also, clean up the test names used in
        pass and fail.

Sun Aug 13 00:39:24 1995  Jeff Law  (law@snake.cs.utah.edu)

        * gas/sh/basic.exp: Update now that we know the right
        bit patters for the new sts instructions.

Thu Aug 10 00:46:21 1995  Ian Lance Taylor  <ian@cygnus.com>

        * gas/mri/char.d: Fix for little endian machines.
        * gas/mri/float.d: Likewise.

Wed Aug  9 15:34:36 1995  Ian Lance Taylor  <ian@cygnus.com>

        * gas/all/struct.s, gas/all/struct.d: New test.
        * gas/all/gas.exp: Run it.

Tue Aug  8 17:11:39 1995  Ian Lance Taylor  <ian@cygnus.com>

        * gas/mri/common.s, gas/mri/common.d: New test.
        * gas/mri/mri.exp: Run it.

Mon Aug  7 22:39:28 1995  Ian Lance Taylor  <ian@cygnus.com>

        * gas/mri/mri.exp: Add setup_xfail for a29k*-*-* for constants
        test.

        * gasp/crash1.out, gasp/macro.out, gasp/sfunc.out: Complete
        truncated files, so that the tests pass.

        * gas/mri/mri.exp: Add setup_xfail for hppa*-*-* for equ,
        constants, and expr.

        * gas/m68k/all.exp: Run schwab test on hpux*, not just hpux.  Run
        on vxworks*, not just vxworks5.1.

        * lib/gas-defs.exp (fail_phase, pass_phase): Remove.
        (run_dump_test): Just call pass or fail.

        * gas/m68k/operands.s, gas/m68k/operands.d: New test.
        * gas/m68k/op68000.d: New test.
        * gas/m68k/cas.s, gas/m68k/cas.d: New test.
        * gas/m68k/bitfield.s, gas/m68k/bitfield.d: New test.
        * gas/m68k/schwab.d: Run objdump with -j .text.  Adjust for
        changes to disassembler.
        * gas/m68k/all.exp: Run new tests.  Run schwab test for
        m68k-*-coff*.

Mon Aug  7 03:01:32 1995  Jeff Law  (law@snake.cs.utah.edu)

        * gas/sh/*: New tests for the hitachi-sh.

Tue Aug  1 18:02:47 1995  Ian Lance Taylor  <ian@cygnus.com>

        * gas/mri/*: New tests for MRI mode.

        * lib/gas-defs.exp (run_dump_test): Support using objcopy.  Dump
        program executions to the log file before running them.  Use the
        simple program name, rather than the path to the binary being run,
        in pass/fail messages.
        (regexp_diff): If the regexp file has the special comment #pass,
        stop checking at that point.
        * config/default.exp: Set NM, NMFLAGS, OBJCOPY, and OBJCOPYFLAGS,
        if they are not already set.

Tue Aug  1 11:41:30 1995  steve chamberlain  <sac@slash.cygnus.com>

        * Makefile.in: Remove superfluous runtest gasp.

Mon Jul 31 18:19:26 1995  steve chamberlain  <sac@slash.cygnus.com>

        * gasp/*: New.
        * Makefile.in: Use gasp tests.
        * config/default.exp: Add gasp stuff.

Thu Jul 20 18:56:48 1995  Jeff Law  (law@snake.cs.utah.edu)

        * gas/all/gas.exp: Disable tests that are not appropriate for
        the PA.

Thu Jul 13 18:22:49 1995  Ken Raeburn  <raeburn@cygnus.com>

        * gas/m68k/all.exp: Run schwab test for m68k vxworks5.1.

Wed Jun 21 21:28:57 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>

        * gas/m68k/schwab.*: New test based on a test case from Andreas
        Schwab.
        * gas/m68k/all.exp: Run it for some aout configurations.

Mon Jun 12 22:27:18 1995  Jeff Law  (law@snake.cs.utah.edu)

        * gas/hppa/parse/badfmpyadd.s: New test.
        * gas/hppa/parse/parse.exp: Run it.

Sun May 21 20:26:18 1995  Jeff Law  (law@snake.cs.utah.edu)

        * gas/hppa/unsorted/unsorted.exp: Disable align4 tests for
        ELF targets.

Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)       

        * arm/arm7dm.s: New file -- tests for ARM7DM instructions.
        * arm/arm6.s: Correct bogus tests.
        * arm/gas.exp (arm6.s): Is now a valid test.
        (arm7dm.s): New test.
        * arm/float.s: Add load/store multiple floating point instruction 
        tests.

Wed May  3 13:14:44 1995  Jeff Law  (law@snake.cs.utah.edu)

        * gas/hppa/reloc/longcall.s: New test.
        * gas/hppa/reloc/reloc.exp: Run it.

Tue May  2 16:37:48 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>

        * gas/mips/ld.d: Modified for gas delay-slot fixes.

Sat Apr 29 23:35:18 1995  Doug Evans  <dje@chestnut.cygnus.com>

        * lib/gas-dg.exp: New file.

Tue Apr 11 13:57:52 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>

        * gas/mips/mips4.d: Allow more than exactly 8 zeros in bc1*
        targets.

Mon Apr 10 15:36:39 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>

        * lib/gas-defs.exp (pass_phase): New proc.
        (run_dump_test): Note passing or failing of each phase of this
        test, instead of failure of phases or passing of complete test.
        Ensure test file name is in reported message.

Sat Apr  8 12:46:33 1995  Doug Evans  <dje@chestnut.cygnus.com>

        * lib/gas-defs.exp (run_dump_test): Handle arguments with paths.
        Always resolve testcase status before returning.
        If `slurp_options' fails, return and don't do test.
        (slurp_options): Fix "can't open" error message.
        Return -1 to indicate error.

Mon Mar 20 22:45:30 1995  Jeff Law  (law@snake.cs.utah.edu)

        * gas/hppa/unsorted/common.s: New test.
        * gas/hppa/unsorted/unsorted.exp: Run it.

Fri Mar 10 19:07:09 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>

        * gas/h8300/ffxx1.s: Add .word 0 at the end to eliminate
        uncertainty as to whether there should be trailing bytes in the
        output file.
        * gas/h8300/ffxx1.d: Adjust reloc values to permit an addend value
        of 0x00000000ffffffff on 64-bit hosts.  (I'm not sure if this is
        correct.)  End with "..." to match trailing zero bytes.

Wed Mar  8 15:50:34 1995  Ian Lance Taylor  <ian@cygnus.com>

        * gas/mips/mips4.d, gas/mips/mips4.s: New files.
        * gas/mips/mips.exp: Run new test.

Thu Feb 23 17:58:50 1995  Jeff Law  (law@snake.cs.utah.edu)

        * gas/hppa/basic/fmemLRbug.s: Add indexing variants.
        * gas/hppa/basic/basic.exp: Test them.

Wed Feb 15 15:43:26 1995  Ian Lance Taylor  <ian@cygnus.com>

        * gas/mips/uld.d: New file.
        * gas/mips/uld.s: New file.
        * gas/mips/usd.d: New file.
        * gas/mips/usd.s: New file.
        * gas/mips/mips.exp: Run new tests.

Thu Feb  9 10:57:39 1995  Jeff Law  (law@snake.cs.utah.edu)

        * gas/hppa/reloc/applybug.s: New test.
        * gas/hppa/reloc/reloc.exp (do_applybug_test): Run it.

Thu Feb  2 00:34:55 1995  Jeff Law  (law@snake.cs.utah.edu)

        * gas/hppa/reloc/picreloc.s: New test.
        * gas/hppa/reloc/reloc.exp (do_pic_relocation_test): Run it.

Fri Jan 27 14:02:02 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>

        * gas/h8300/ffxx1.d, gas/h8300/ffxx1.s, gas/h8300/cmpsi2.s,
        gas/h8300/h8300.exp: New tests.

Mon Jan 23 21:44:26 1995  Jeff Law  (law@snake.cs.utah.edu)

        * gas/hppa/basic/basic.exp (do_system): Update.

Wed Jan 11 17:20:25 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>

        * gas/mips/mips.exp: Don't run the memory-access tests if the
        format is a.out, because the generated code is different from what
        is used with other formats.

Tue Jan 10 11:42:13 1995  Jeff Law  (law@snake.cs.utah.edu)

        * gas/hppa/unsorted/unsorted.exp (align4.s): Fix glitch in
        regexp to avoid losing without a controlling tty.

Fri Dec 30 18:08:20 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>

        * gas/i386/pushw.l: Fixed whitespace to match current listing
        style.

        * gas/all/gas.exp: Mark test p1480.s expected to pass, even with
        listings enabled.

Thu Dec 15 18:14:27 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>

        * Makefile.in (AS_FOR_TARGET, OBJDUMP_FOR_TARGET): Don't set.
        (uninstall): Don't set OBJDUMP and OBJDUMPFLAGS in site.exp.
        * config/default.exp: Default OBJDUMP and OBJDUMPFLAGS.  Use
        findfile and transform procedures to determine objdump program
        name.

        * gas/mips/abs.s, gas/mips/div.s: Force some padding at the end,
        in case the format doesn't automatically require it.
        * gas/mips/beq.d, gas/mips/jal.d: Handle MIPS_JMP as an alternate
        name for the reloc type.

        * lib/gas-defs.exp (file_contents, verbose_eval): New procs.
        (run_dump_test): If verbosity level is over 3, print out dump
        command and its output.

Tue Dec 13 18:21:09 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>

        * gas/mips/jal-svr4pic.d: Fix 0-strings to work with 64-bit hosted
        disassembly.

Fri Dec  9 19:54:04 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>

        * gas/all/gas.exp (comment.s test): Make the "\r" optional, since
        it depends on tty modes.

        * lib/gas-defs.exp (gas_start): Try using -nottycopy instead of
        -nottyinit.

        * gas/arm/gas.exp: The arm6 test should report errors, for now.

Thu Dec  8 20:19:09 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>

        * lib/gas-defs.exp: Use -i in expect_after command.

Wed Dec  7 16:49:14 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>

        * gas/mips/mul.d,jal.d: Fix 0-strings to work with 64-bit hosted
        disassembly.

        * gas/ieee-fp: Renamed from ieee.fp.

        * lib/gas-defs.exp: Make sure timeout is at least 2 minutes.

Wed Nov 30 10:48:00 1994  Jeff Law  (law@snake.cs.utah.edu)

        * gas/hppa/parse: Renamed from gas/hppa/more.parse.

Mon Nov 28 00:40:26 1994  Jeff Law  (law@snake.cs.utah.edu)

        * gas/hppa/more.parse/parse.exp (nosubspace.s): No longer expected
        to fail.  Fix comments for the test.  Tweak test name.

Tue Nov 22 23:38:20 1994  Jeff Law  (law@snake.cs.utah.edu)

        * gas/hppa/reloc/reloc.exp: Minor tweaks to match current PA ELF
        output. 

Fri Nov 18 17:56:57 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>

        * gas/mips/ld.d: Adjust to work for both big and little endian
        code.
        * gas/mips/ld.s, gas/mips/lif-empic.d: Likewise.
        * gas/mips/lifloat.d, gas/mips/ulh-empic.d: Likewise.
        * gas/mips/ulh.d, gas/mips/ulw.d, gas/mips/ush.d: Likewise.
        * gas/mips/usw.d: Likewise.

Tue Nov 15 11:09:57 1994  Jeff Law  (law@snake.cs.utah.edu)

        * gas/hppa/unsorted/align4.s: New test.
        * gas/hppa/unsorted/unsorted.exp: Run it.

        * gas/hppa/unsorted/unsorted.exp (importbug): Tweak to match
        current expected PA ELF output.
        * gas/hppa/reloc/reloc.exp (do_r_no_reloc): Likewise.
        (do_plabel_relocation_test): Likewise.

Thu Nov  3 18:14:09 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>

        * gas/all/p1480.s: Use larger constant, so expression can have a
        positive value.
        * gas/all/gas.exp: Expect p1480.s without listings to pass.

Thu Nov  3 15:43:46 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>

        * gas/mips/ulh.d, gas/mips/ulw.d, gas/mips/ush.d, gas/mips/usw.d:
        Correct test cases.

Thu Oct 20 00:55:13 1994  Jeff Law  (law@snake.cs.utah.edu)

        * gas/hppa/reloc/blebug3.s: New test.
        * gas/hppa/reloc/reloc.exp: Run it.

Mon Oct 17 02:33:53 1994  Jeff Law  (law@snake.cs.utah.edu)

        * gas/hppa/reloc/reduce3.s: New test.
        * gas/hppa/reloc/reloc.exp: Run it.

Sun Oct 16 22:25:56 1994  Jeff Law  (law@snake.cs.utah.edu)

        * gas/hppa/reloc/reloc.exp (r_no_reloc): Tweak output to match
        current reality.

Wed Sep 28 21:21:34 1994  Jeff Law  (law@snake.cs.utah.edu)

        * gas/hppa/reloc/reduce.s: Renamed from relocreduce.s
        * gas/hppa/reloc/reduce2.s: Renamed from relocreduce2.s
        * gas/hppa/reloc/r_no_reloc.s: Renamed from r_no_relocbug.s
        * gas/hppa/reloc/reloc.exp: Changed accordingly.

Wed Sep 28 13:25:10 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)

        * gas/mips/beq.d, gas/mips/beq.s: Test that unconditional branch
        overflows are correctly converted to jumps.

Mon Sep 26 17:41:43 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)

        * gas/mips: Add test cases for PIC code, both SVR4 style and
        -membedded-pic style.

Fri Sep 23 14:45:42 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)

        * gas/mips: New directory with MIPS specific test cases.

        * lib/gas-defs.exp (run_dump_test): Permit the .d file to specify
        the name of the source file to assemble.
        (regexp_diff): Put the reason for failure in the log file.

Wed Sep 21 13:44:21 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)

        * lib/gas-defs.exp: Don't try to use shell redirection, since TCL
        doesn't support it.  Redirect stdout using > instead of 1>, and
        don't bother to redirect stderr since TCL redirects it anyhow.
        (run_dump_test): Pass appropriate arguments to program, defaulting
        to -r.

Sat Sep 17 01:04:56 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)

        * gas/vax: New directory.
        * gas/vax/{quad.s,quad.exp}: New test, for immediate quadword
        values.

Mon Sep 12 22:19:11 1994  Jeff Law  (law@snake.cs.utah.edu)

        * gas/hppa/reloc/r_no_relocbug.s: New test.
        * gas/hppa/reloc/reloc.exp: Run it.

        * gas/hppa/reloc/reloc.exp (do_function_reloc_bug): Update
        expected output.

Sun Sep 04 17:58:10 1994  Richard Earnshaw (rwe@pegasus.esprit.ec.org)

        * gas/arm/*: New subtree.  Add ARM tests.

Mon Aug  8 12:13:31 1994  Jeff Law  (law@snake.cs.utah.edu)

        * gas/hppa/unsorted/unsorted.exp: Accept any character
        between foo's type and foo itself.

Fri Jul 15 19:09:25 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)

        * lib/gas-defs.exp (run_dump_test): New routine for running the
        assembler, running objdump or nm (not fully supported) on the
        resulting object file, and comparing the results against a file of
        regular expressions in the test suite, all in one command.
        Options for the assembler and objdump are read from comments at
        the start of the .d file.
        (fail_phase, slurp_options): New auxiliary routines.
        (regexp_diff): Always return a value.  Fix bugs in actually doing
        the regexp test.

        * gas/sun4/addend.exp: Use run_dump_test.
        * gas/sun4/addend.d: Fix regular expressions so that they work.

Thu Jul  7 11:55:33 1994  Jeff Law  (law@snake.cs.utah.edu)

        * gas/hppa/reloc/relocreduce2.s: More relocation reduction tests.
        * gas/hppa/reloc/reloc.exp: Run them.

Thu Jun 30 18:49:25 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)

        * config/default.exp: Look for "as.new" in "$base_dir/..", where
        it got compiled, not in "$base_dir".
        * config/unknown.exp: Deleted.

Sun Jun 26 13:23:54 1994  Jeff Law  (law@snake.cs.utah.edu)

        * gas/lib/gas-defs.exp (gas_finish): Call "close" and "wait"
        before exiting.  Enclose both calls inside a "catch".
        (objdump_finish): Likewise.

Fri Jun 10 10:23:35 1994  Jeff Law  (law@snake.cs.utah.edu)

        * gas/hppa/reloc/reloc.exp (roundmode test): Tweak expected output
        for SOM to match current testcase.

Thu Jun  2 19:46:58 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)

        * gas/i386/{pushw.s,pushw.l}: New test.
        * gas/i386/all.exp: Run it.

        * Makefile.in (distclean): Remove site config files and gas.sum.

Fri May 27 12:24:18 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)

        * gas/m68k/disperr.s: Use % for registers.

        * gas/m68k-coff/gas.exp: Expect failure for p2389a.s.

Tue May 17 14:53:08 1994  Bill Cox  (bill@rtl.cygnus.com)

        * lib/gas-defs.exp: Replace error proc calls with perror calls.

Mon May 16 13:19:16 1994  Jeff Law  (law@snake.cs.utah.edu)

        * gas/hppa/reloc/reloc.exp: Tweak expected output to match new
        ELF code.
        * gas/hppa/reloc/roundmode.s: Avoid "S" and "D" modes, ELF does
        not support them.
        * gas/hppa/unsorted/unsorted.exp: Tweak expected output to match
        new ELF code.

Thu May  5 17:27:54 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)

        * config/default.exp: Renamed from unix-gas.exp.

Mon Apr 11 10:31:00 1994  Bill Cox  (bill@rtl.cygnus.com)

        * Makefile.in (check): Set TCL_LIBRARY for runtest.

Mon Apr 11 07:54:10 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gas/hppa/more.parse/callinfobug.s: Add missing name for
        procedure.

        * gas/hppa/reloc/funcrelocbug.s: Place the trampoline in the
        $DATA$ rather than $LIT$ subspace.

Sun Mar 27 14:05:33 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gas/hppa/reloc/funcrelocbug.s: New test.
        * gas/hppa/reloc/reloc.exp: Run it.

Thu Mar 17 13:38:04 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gas/hppa/unsorted/importbug.s: New test.
        * gas/hppa/unsorted/unsorted.exp: Run it.

Wed Mar 16 11:57:07 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gas/hppa/more.parse/regpopbug.s: Add trivial .equ test.

        * gas/hppa/unsorted/globalbug.s: New test (expected to fail).
        * gas/hppa/unsorted/unsorted.exp: Run it.

        * gas/hppa/more.parse/callinfobug.s: New test.
        * gas/hppa/omre.parse/parse.exp: Run it.

        * gas/hppa/more.parse/regpopbug.s: New test.
        * gas/hppa/more.parse/parse.exp: Run it.

Mon Feb 28 14:10:04 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)

        * lib/gas-defs.exp (objdump): New proc.
        (objdump_start): Deleted unused proc.
        (objdump_start_common): Merged into objdump_start_no_subdir.

        * gas/alpha/fp.exp: Use objdump instead of
        objdump_start_no_subdir, since the former actually waits for
        objdump to finish.  Specify .rdata section only.  Make comment
        indicate Alpha architecture rather than SPARC.
        * gas/alpha/fp.d: Omit .reginfo patterns.  Just use "." to match
        against ASCII code 0x2a ("*", special in regexp).
        * gas/sun4/addend.exp: Use objdump instead of
        objdump_start_no_subdir.

Thu Feb 24 07:11:57 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gas/hppa/more.parse/parse.exp (no subspace test): Only expect
        a failure if gas is not producing an ELF object.

Mon Feb 14 09:24:03 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gas/hppa/basic/fmemLRbug.s: New test.
        * gas/hppa/basic/basic.exp: Run it.

Thu Feb 10 00:34:26 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)

        * gas/alpha/fp.*: New files.
        * lib/gas-defs.exp (regexp_diff): Report noted mismatch at
        verbosity level 3 or above only.

Mon Feb  7 15:53:10 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gas/hppa/*/*.exp: Change xfails to check for PA ELF rather than
        PA OSF1.

Fri Feb  4 23:42:14 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gas/hppa/more.parse/xmpyubug.s: New test.
        * gas/hppa/more.parse/parse.exp: Run it.

Fri Feb  4 17:13:20 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)

        * lib/gas-defs.exp (regexp_diff): New procedure, vaguely based on
        "simple_diff" from linker test suite.
        * gas/sun4/addend.exp: Use it.
        * gas/sun4/addend.d: New file.

Sun Jan 30 23:34:58 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)

        * gas/all/gas.exp: Adjust regexp for x930509.s for current listing
        format.

Thu Jan 20 16:44:51 1994  Rob Savoye  (rob@darkstar.cygnus.com)

        * gas/all/gas.exp, lib/gas-defs.exp, sun4/addend.exp,
        sparc-solaris/addend.exp: Tweaked to fix a few bugs and to run
        well under either version of expect.

Mon Jan 17 00:25:03 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gas/hppa/basic/fp_misc.s: Delete copr instruction.  It's tested
        elsewhere now.
        * gas/hppa/basic/{copr, coprmem, spop}.s: New tests.
        * gas/hppa/basic/basic.exp: Run them.

Thu Jan 13 11:59:22 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gas/all/gas.exp: No longer expect difference of forward
        references to fail.
        * gas/all/x930509.s: Fix testcase to match how the expect code was
        written.

Wed Jan 12 13:41:10 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gas/hppa/reloc/reloc.exp: Fix typo in last change.  Latest test
        for cross-subspace call bugs is no longer expected to fail.

        * gas/hppa/more.parse/procbug.s: Add test for another bug relating
        to having a function's label follow the .PROC directive.

Tue Jan 11 21:47:48 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gas/hppa/reloc/reloc.exp: Add test for cross-subspace call bug
        found while working on multiple $CODE$ subspace support.

Mon Jan 10 09:54:15 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gas/hppa/more.parse/parse.exp: procbug.s is no longer expected
        to fail.
        * gas/hppa/more.parse/procbug.s: Add missing .procend.

Mon Jan  3 10:07:47 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gas/hppa/more.parse/labelbug.s: Add testcase for bug in last
        app.c change.

Wed Dec 29 11:32:39 1993  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gas/hppa/more.parse/labelbug.s: Add more colonless label tests.

Wed Dec 15 08:24:31 1993  Ken Raeburn  (raeburn@rtl.cygnus.com)

        * Makefile.in (site.exp): Don't set ASFLAGS.  Quote value of
        OBJDUMPFLAGS in case it's empty.  Use temporary names until the
        end; make creating site.exp the final step.
        (check): Pass in ASFLAGS.

        * gas/all/gas.exp: Use all_ones proc.  Change regexp for matching
        C comments to avoid bugs in latest expect code.

Wed Dec  8 14:30:14 1993  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gas/m68k/disperr.s: New test.
        * gas/m68k/all.exp: Run it.

Sun Dec  5 19:24:57 1993  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gas/hppa/reloc/roundmode.s: New test.
        * gas/hppa/reloc/reloc.exp: Run it.  Fix typo in last change.

Wed Dec  1 10:44:18 1993  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gas/hppa/reloc/reloc.exp: Run the first half of bogus R_EXIT
        test for ELF.  

Tue Nov 30 13:43:21 1993  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gas/hppa/more.parse/parse.exp: Test for error on for subspace
        directive is an XFAIL for SOM assmeblers.

        * gas/hppa/reloc/reloc.exp: Remove XFAIL for relocation on
        cross-subspace call test.

Sun Nov 28 12:12:50 1993  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gas/hppa/more.parse/appbug.s: New test.
        * gas/hppa/more.parse/parse.exp: Run it.

        * gas/hppa/unsorted/align3.s: New test.
        * gas/hppa/unsorted/unsorted.exp: Run it.

Sat Nov 27 22:50:01 1993  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gas/all/p2425.s: Insert a tab before assembler directives so
        that the directives are not interpreted as labels.

        * gas/hppa/basic/weird.s: Sync with GDB version.

        * gas/hppa/more.parse/labelbug.s: New test.

        * gas/hppa/more.parse/parse.exp: Run it.

Wed Nov 24 01:25:03 1993  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gas/hppa/reloc/fixupbug.s: New test.
        * gas/hppa/reloc/reloc.exp: Run it.

        * gas/hppa/reloc/exitbug.s: New test.
        * gas/hppa/reloc/reloc.exp: Run it.

Sun Nov 21 22:11:10 1993  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gas/hppa/reloc/reloc.exp: Minor fixes so that SOM & ELF can
        share the same test code.
        * gas/hppa/reloc/relocreduce.s: Likewise.

        * gas/hppa/basic/fmem.s: Add quadword FP store instructions.
        * gas/hppa/basic/basic.exp: Test quadword FP store instructions.

Sun Nov  7 00:31:41 1993  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gas/hppa/reloc/reloc.exp: No longer expect failure for
        field selector on ble instruction test.

        * gas/hppa/basic/basic.exp: No longer expect failures for
        system instruction tests now that probei is fixed.

Sat Nov  6 22:45:08 1993  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gas/hppa/reloc/selectorbug.s: New test.
        * gas/hppa/reloc/reloc.exp: Run it.

Thu Nov  4 17:01:30 1993  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gas/hppa/unsorted/fragbug.s: New test.
        * gas/hppa/unsorted/unsorted.exp: Run it.

Thu Nov 04 09:09:49 1993  Jeffrey Wheat  (cassidy@cygnus.com)

        * Makefile.in: Changed RUNTESTFLAGS to RUNTEST_FLAGS

Tue Nov  2 22:12:30 1993  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gas/hppa/more.parse/{defbug.s, stdreg.s}: New tests.
        * gas/hppa/more.parse/parse.exp: Run them.

Mon Nov  1 23:37:58 1993  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gas/hppa/reloc/reloc.exp (reloc_reduce): Correct offsets at
        which specific relocations are expected to be found.
        
Sat Oct 30 14:12:31 1993  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gas/hppa/unsorted/unsorted.exp (ss_align): Remove OSF xfail.

        * gas/hppa/more.parse/parse.exp: Add new test.
        * gas/hppa/more.parse/ssbug.s: New test to make sure non-default
        sections are handled correctly.

        * gas/all/gas.exp: Disable (and fail) p1480.s for all PA targets.

Fri Oct 29 16:29:06 1993  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gas/hppa/more.parse/calldatabug.s: Colonize.
        * gas/hppa/more.parse/parse.exp: Fix typos.

Thu Oct 28 21:40:06 1993  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gas/hppa/{basic, more.parse, reloc, unsorted}: New directories.
        * gas/hppa/*/*.exp: New test drivers.
        * gas/hppa/*/*.s: New test files.

Mon Oct 25 09:40:59 1993  Ken Raeburn  (raeburn@cygnus.com)

        * gas/sun4: New directory.
        * gas/sun4/addend.s,addend.exp: New test case.
        * gas/sparc-solaris/addend.s,addend.exp: Solaris version of same
        test case.

        * gas/all/gas.exp: Check `*' in C comments.

        * lib/gas-defs.exp (all_ones): New procedure, for a predicate to
        simplify some tests.
        (want_no_output): Return zero or nonzero, depending on success or
        failure.
        (gas_test_old): Return value from want_no_output.
        (objdump_start_common): Split off from objdump_start.
        (objdump_start_no_subdir): New procedure.

Wed Oct 20 07:25:48 1993  Ken Raeburn  (raeburn@rover.cygnus.com)

        * gas/all/diff1.s, gas/m68k/pic1.s: New tests.
        * gas/all/gas.exp, gas/m68k/all.exp: Run them.

        * Makefile.in (OBJDUMP_FOR_TARGET): Define similar to
        AS_FOR_TARGET.
        (check): Don't pass ASFLAGS variable.
        (site.exp): Put ASFLAGS, OBJDUMP, OBJDUMPFLAGS into site.exp.

        From Jeff Law:

        * lib/gas-defs.exp (objdump_start, objdump_finish): New functions
        so that tests can parse the output of objdump looking for errors
        in relocation entires, file headers and the like.

Thu Sep 23 16:20:34 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)

        * gas/ieee.fp/x930509a.exp: Currently expected to fail always.
        * gas/all/gas.exp (p1480.s, x930509.s): Ditto.  Break up gas_test
        call so it no longer performs multiple tests.
        * gas/m68k/all.exp (t2.s): Don't bother with listings.
        (p2410.s): Don't pass unwanted arguments to gas_test_error.

Wed Aug 25 16:50:08 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)

        * lib/do*: Remove RCS id strings.

Mon May 17 15:09:45 1993  Ken Raeburn  (raeburn@deneb.cygnus.com)

        * gas/all/float.s, gas/all/p1480.s, gas/m68k/p2410.s: New tests.
        * gas/all/gas.exp, gas/m68k/all.exp: Run them.
        * gas/i386: New directory.

Mon May 10 14:50:20 1993  Ken Raeburn  (raeburn@deneb.cygnus.com)

        * Added directory structure, to categorize tests by targets.
        * Added new tests all/x930509.s, ieee.fp/x930509a.s, m68k/p2663.s,
        and refined some to examine the assembler listing output.
        * lib/gas-defs.exp: Renamed gas_start to gas_run.  Added some
        expect_after patterns.
        (gas_start, gas_finish): New procs, for tests that examine process
        output.
        * config/unix-gas.exp: Invoke gas_init directly, instead of
        requiring test .exp files do it.

Wed Apr 21 01:24:16 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)

        * gas/gas.exp: Handle new tests, and changes to testing procs.

        * lib/gas-defs.exp (want_no_output): New proc; success iff output
        is empty.
        (gas_test_old): Functionally same as old gas_test.
        (gas_test_ignore_stdout): Rewritten to use want_no_output.
        (gas_test): New argument lists set of options to be tried in
        combinations.  Option with trailing ">" indicates standard output
        should be ignored.

        * gas/p2425a.s: Use %-form for registers, so this test can be run
        on m68k-coff targets too.

        * gas/p2430a.s: New test case, whitespace &c matches customer
        report more closely.  Gets different results from p2430.s; this is
        bad, and not yet tested for.

Mon Apr  5 12:27:19 1993  Ken Raeburn  (raeburn@cygnus.com)

        * gas/p2389a.s, gas/p2411.s, gas/t2.s: New test cases.
        * lib/run: New script.
        * gas/gas-defs.exp (gas_start): Takes new args, assembler options
        and redirection options.  Use "run" script so redirection works.
        (gas_test): Now takes assembler options as separate arg from input
        file name.
        (gas_test_ignore_stdout): New proc.  Discards output.
        (gas_test_error): New proc.  Expects assembler to generate output.
        (target_cpu_family setting): Handle i486->i386 also.

        * lib/do*: Scripts moved here from gas/testscripts.  May be useful
        someday for writing more test cases; not currently used.

Tue Mar 30 11:45:27 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)

        * gas/sol-gcc.s, gas/sol-cc.s, gas/p2425a.s, gas/p2389.s: New test
        cases.
        * gas/gas.exp: Enable them for appropriate targets.  Removed some
        useless comments &c.  Changed m68k target test to be more general.

        * lib/gas-defs.exp (gas_exit, gas_init): New procs.
        * gas/gas.exp: Call gas_init.

Mon Mar 29 00:00:00 1993  Ken Raeburn  (raeburn@kr-pc.cygnus.com)

        * Test suite created.