gas/testsuite/gas/mips/mips.exp

   1 #
   2 # Some generic MIPS tests
   3 #
   4
   5 proc run_list_test { name opts } {
   6     global srcdir subdir
   7     set testname "MIPS $name"
   8     set file $srcdir/$subdir/$name
   9     gas_run ${name}.s $opts ">&dump.out"
  10     if { [regexp_diff "dump.out" "${file}.l"] } then {
  11         fail $testname
  12         verbose "output is [file_contents "dump.out"]" 2
  13         return
  14     }
  15     pass $testname
  16 }
  17
  18 if { [istarget mips*-*-*] } then {
  19     set no_mips16 0
  20     set elf [expr [istarget *-*-elf*] || [istarget *-*-irix5*] || [istarget *-*-irix6* ] || [istarget *-*-linux*] || [istarget *-*-netbsd*] ]
  21     set ecoff [expr [istarget *-*-ecoff*] || [istarget *-*-ultrix*] || [istarget *-*-irix\[1-4\]*] ]
  22     set aout [expr [istarget *-*-bsd*] || [istarget *-*-openbsd*] ]
  23     set ilocks [istarget mipstx39*-*-*]
  24     set gpr_ilocks [expr [istarget mipstx39*-*-*]]
  25     set addr32 [expr [istarget mipstx39*-*-*]]
  26
  27     if { [istarget "mips*-*-*linux*"] } then {
  28         set tmips "t"
  29     } else {
  30         set tmips ""
  31     }
  32     if [istarget mips*el-*-*] {
  33         set el el
  34     } {
  35         set el ""
  36     }
  37
  38     run_dump_test "abs"
  39     run_dump_test "add"
  40     run_dump_test "and"
  41     run_dump_test "break20"
  42     run_dump_test "trap20"
  43     run_dump_test "beq"
  44     run_dump_test "bge"
  45     run_dump_test "bgeu"
  46     run_dump_test "blt"
  47     run_dump_test "bltu"
  48     if !$ilocks { run_dump_test "div" } else { run_dump_test "div-ilocks" }
  49     run_dump_test "dli"
  50     if $elf {
  51         run_dump_test "elf-jal"
  52     } else {
  53         run_dump_test "jal"
  54     }
  55     if $elf { run_dump_test "jal-svr4pic" }
  56     if $elf { run_dump_test "jal-xgot" }
  57     if $ecoff { run_dump_test "jal-empic" }
  58     if !$aout { run_dump_test "la" }
  59     if $elf { run_dump_test "la-svr4pic" }
  60     if $elf { run_dump_test "la-xgot" }
  61     if $ecoff { run_dump_test "la-empic" }
  62     if !$aout { run_dump_test "lb" }
  63     if $elf { run_dump_test "lb-svr4pic" }
  64     if $elf {
  65         # Both versions specify the cpu, so we can run both regardless of
  66         # the interlocking in the configured default cpu.
  67         run_dump_test "lb-xgot"
  68         run_dump_test "lb-xgot-ilocks"
  69     }
  70     if $ecoff { run_dump_test "lb-empic" }
  71     if !$aout {
  72         if !$gpr_ilocks {
  73             run_dump_test "ld"
  74         } else {
  75             if !$addr32 {
  76                 run_dump_test "ld-ilocks"
  77             } else {
  78                 run_dump_test "ld-ilocks-addr32"
  79             }
  80         }
  81     }
  82     if $elf { run_dump_test "ld-svr4pic" }
  83     if $elf { run_dump_test "ld-xgot" }
  84     if $ecoff { run_dump_test "ld-empic" }
  85     run_dump_test "li"
  86     if !$aout { run_dump_test "lifloat" }
  87     if $elf { run_dump_test "lif-svr4pic" }
  88     if $elf { run_dump_test "lif-xgot" }
  89     if $ecoff { run_dump_test "lif-empic" }
  90     run_dump_test "mips4"
  91     if !$ilocks { run_dump_test "mul" } else { run_dump_test "mul-ilocks" }
  92     run_dump_test "rol"
  93     if !$aout { run_dump_test "sb" }
  94     run_dump_test "trunc"
  95     if !$aout { run_dump_test "ulh" }
  96     if $elf { run_dump_test "ulh-svr4pic" }
  97     if $elf { run_dump_test "ulh-xgot" }
  98     if $ecoff { run_dump_test "ulh-empic" }
  99     if !$aout {
 100         run_dump_test "ulw"
 101         run_dump_test "uld"
 102         run_dump_test "ush"
 103         run_dump_test "usw"
 104         run_dump_test "usd"
 105     }
 106     # The mips16 test can only be run on ELF, because only ELF
 107     # supports the necessary mips16 reloc.
 108     if { $elf && !$no_mips16 } { run_dump_test "mips16" }
 109     run_dump_test "delay"
 110     run_dump_test "nodelay"
 111     run_dump_test "mips4010"
 112     run_dump_test "mips4650"
 113     run_dump_test "mips4100"
 114     run_dump_test "perfcount"
 115     # Linux uses ELF stabs, which doesn't support line number.
 116     setup_xfail "mips*-*-*linux*"
 117     run_dump_test "lineno"
 118     run_dump_test "sync"
 119     run_dump_test "mips32"
 120     run_dump_test "mips64"
 121     run_dump_test "sb1-ext-ps"
 122
 123     # It will always fail until someone fixes it.
 124     setup_xfail "mips*-*-*"
 125     run_dump_test "relax"
 126
 127     run_list_test "illegal" ""
 128
 129     run_dump_test "mips-gp32-fp32"
 130     run_dump_test "mips-gp32-fp64"
 131     run_dump_test "mips-gp64-fp32"
 132     run_dump_test "mips-gp64-fp64"
 133
 134     if $elf {
 135         # Make sure that -mcpu=FOO and -mFOO are equivalent.  Assemble a file
 136         # containing 4650-specific instructions with -m4650 and -mcpu=4650,
 137         # and verify that they're the same.  Specifically, we're checking
 138         # that the EF_MIPS_MACH field is set, and that the 4650 'mul'
 139         # instruction does get used.  In previous versions of GAS,
 140         # only -mcpu=4650 would set the EF_MIPS_MACH field; -m4650 wouldn't.
 141         run_dump_test "elf_e_flags1"
 142         run_dump_test "elf_e_flags2"
 143         run_dump_test "elf_e_flags3"
 144         run_dump_test "elf_e_flags4"
 145
 146         run_dump_test "mips-gp32-fp32-pic"
 147         run_dump_test "mips-gp32-fp64-pic"
 148         run_dump_test "mips-gp64-fp32-pic"
 149         run_dump_test "mips-gp64-fp64-pic"
 150
 151         run_dump_test "mips-abi32"
 152         run_dump_test "mips-abi32-pic"
 153
 154         run_dump_test "elf${el}-rel"
 155         if [istarget mips64*-*-*] {
 156             run_dump_test "elf${el}-rel2"
 157             run_dump_test "elf-rel4"
 158         } {
 159             run_dump_test "e32${el}-rel2"
 160             run_dump_test "e32-rel4"
 161         }
 162         run_dump_test "elf${el}-rel3"
 163         run_dump_test "${tmips}${el}empic"
 164         run_dump_test "empic2"
 165         if { !$no_mips16 } {
 166             run_dump_test "${tmips}mips${el}16-e"
 167             run_dump_test "${tmips}mips${el}16-f"
 168         }
 169     }
 170 }