gas/testsuite/gas/mips/mips.exp

   1 #
   2 # Some generic MIPS tests
   3 #
   4
   5 # When adding a new test to this file, try to do the following things:
   6 #
   7 # * If testing assembly and disassembly of code, don't forget to test
   8 # the actual bit encodings of the instructions (using the
   9 # --show-raw-insn flag to objdump).
  10 #
  11 # * Try to run the test for as many architectures as appropriate,
  12 # using the "run_dump_test_arches" or "run_list_test_arches" functions,
  13 # along with the output from a call to "mips_arch_list_matching."
  14 #
  15 # * Be sure to compare the test output before and after your testsuite
  16 # changes, to verify that existing and new tests were run as expected.
  17 # Look for expect ERROR messages in the testsuite .log file to make sure
  18 # the new expect code did not contain errors.
  19
  20 # To add support for a new CPU to this file, add an appropriate entry
  21 # to the sequence of "mips_arch_create" function calls below, and test
  22 # the result.  The new CPU should automatically be used when running
  23 # various tests.  If the new CPU is the default CPU for any tool
  24 # targets, make sure the call to "mips_arch_create" reflects that fact.
  25
  26
  27 # "LOSE" marks information about tests which fail at a particular point
  28 # in time, but which are not XFAILed.  Either they used to pass
  29 # and indicate either regressions or the need to tweak the tests to keep
  30 # up the with code, or they are new tests and it is unknown whether or not
  31 # they should pass as-is for the given object formats.
  32
  33
  34 # The functions below create and manipulate an "architecture data
  35 # array" which contains entries for each MIPS architecture (or CPU)
  36 # known to these tests.  The array contains the following information
  37 # for each architecture, indexed by the name of the architecture
  38 # described by the entry:
  39 #
  40 # displayname: The name of the entry to be used for pretty-printing.
  41 #
  42 # gprsize: The size in bits of General Purpose Registers provided by
  43 # the architecture (must be 32 or 64).
  44 #
  45 # props: A list of text strings which are associated with the
  46 # architecture.  These include the architecture name as well as
  47 # information about what instructions the CPU supports.  When matching
  48 # based on properties, an additional property is added to the normal
  49 # property list, "gpr<gprsize>" so that tests can match CPUs which
  50 # have GPRs of a specific size.  The following properties are most
  51 # useful when matching properties for generic (i.e., not CPU-specific)
  52 # tests:
  53 #
  54 #       mips1, mips2, mips3, mips4, mips5, mips32, mips64
  55 #               The architecture includes the instructions defined
  56 #               by that MIPS ISA.
  57 #
  58 #       mips3d  The architecture includes the MIPS-3D ASE.
  59 #
  60 #       ror     The architecture includes hardware rotate instructions.
  61 #
  62 #       gpr32, gpr64
  63 #               The architecture provides 32- or 64-bit General Purpose
  64 #               Registers.
  65 #
  66 # as_flags: The assembler flags used when assembling tests for this
  67 # architecture.
  68 #
  69 # objdump_flags: The objdump flags used when disassembling tests for
  70 # this architecture.
  71 #
  72 # Most entries in the architecture array will have values in all of
  73 # the fields above.  One entry, "default" represents the default CPU
  74 # based on the target of the assembler being built.  If always has
  75 # empty "as_flags" and "objdump_flags."
  76
  77 # mips_arch_create ARCH GPRSIZE EXTENDS PROPS AS_FLAGS OBJDUMP_FLAGS \
  78 #                  (optional:) DEFAULT_FOR_TARGETS
  79 #
  80 # This function creates a new entry in the architecture data array,
  81 # for the architecture or CPU named ARCH, and fills in the entry
  82 # according to the rest of the arguments.
  83 #
  84 # The new entry's property list is initialized to contain ARCH, any
  85 # properties specified by PROPS, and the properties associated with
  86 # the entry specified by EXTENDS.  (The new architecture is considered
  87 # to extend the capabilities provided by that architecture.)
  88 #
  89 # If DEFAULT_FOR_TARGETS is specified, it is a list of targets for which
  90 # this architecture is the default architecture.  If "istarget" returns
  91 # true for any of the targets in the list, a "default" entry will be
  92 # added to the architecture array which indicates that ARCH is the default
  93 # architecture.
  94 proc mips_arch_create {arch gprsize extends props as_flags objdump_flags
  95                        {default_for_targets {}}} {
  96     global mips_arches
  97
  98     if { [info exists mips_arches($arch)] } {
  99              error "mips_arch_create: arch \"$arch\" already exists"
 100     }
 101     if { $gprsize != 32 && $gprsize != 64 } {
 102         error "mips_arch_create: invalid GPR size $gprsize"
 103     }
 104
 105     set archdata(displayname) $arch
 106     set archdata(gprsize) $gprsize
 107     set archdata(as_flags) $as_flags
 108     set archdata(objdump_flags) $objdump_flags
 109     set archdata(props) $arch
 110     eval lappend archdata(props) $props
 111     if { [string length $extends] != 0 } {
 112         eval lappend archdata(props) [mips_arch_properties $extends 0]
 113     }
 114
 115     set mips_arches($arch) [array get archdata]
 116
 117     # Set as default if appropriate.
 118     foreach target $default_for_targets {
 119         if { [istarget $target] } {
 120             if { [info exists mips_arches(default)] } {
 121                 error "mips_arch_create: default arch already exists"
 122             }
 123
 124             set archdata(displayname) "default = $arch"
 125             set archdata(as_flags) ""
 126             set archdata(objdump_flags) ""
 127
 128             set mips_arches(default) [array get archdata]
 129             break
 130         }
 131     }
 132 }
 133
 134 # mips_arch_list_all
 135 #
 136 # This function returns the list of all names of entries in the
 137 # architecture data array (including the default entry, if a default
 138 # is known).
 139 proc mips_arch_list_all {} {
 140     global mips_arches
 141     return [lsort -dictionary [array names mips_arches]]
 142 }
 143
 144 # mips_arch_data ARCH
 145 #
 146 # This function returns the information associated with ARCH
 147 # in the architecture data array, in "array get" form.
 148 proc mips_arch_data {arch} {
 149     global mips_arches
 150
 151     if { ! [info exists mips_arches($arch)] } {
 152         error "mips_arch_data: unknown arch \"$arch\""
 153     }
 154     return $mips_arches($arch)
 155 }
 156
 157 # mips_arch_displayname ARCH
 158 #
 159 # This function returns the printable name associated with ARCH in
 160 # the architecture data array.
 161 proc mips_arch_displayname {arch} {
 162     array set archdata [mips_arch_data $arch]
 163     return $archdata(displayname)
 164 }
 165
 166 # mips_arch_properties ARCH (optional:) INCLUDE_GPRSIZE
 167 #
 168 # This function returns the property list associated with ARCH in the
 169 # architecture data array.  If INCLUDE_GPRSIZE is non-zero, an additional
 170 # "gpr32" or "gpr64" property will be returned as part of the list based
 171 # on the architecture's GPR size.
 172 proc mips_arch_properties {arch {include_gprsize 1}} {
 173     array set archdata [mips_arch_data $arch]
 174     set props $archdata(props)
 175     if { $include_gprsize } {
 176         lappend props gpr$archdata(gprsize)
 177     }
 178     return $props
 179 }
 180
 181 # mips_arch_as_flags ARCH
 182 #
 183 # This function returns the assembler flags associated with ARCH in
 184 # the architecture data array.
 185 proc mips_arch_as_flags {arch} {
 186     array set archdata [mips_arch_data $arch]
 187     return $archdata(as_flags)
 188 }
 189
 190 # mips_arch_objdump_flags ARCH
 191 #
 192 # This function returns the objdump disassembly flags associated with
 193 # ARCH in the architecture data array.
 194 proc mips_arch_objdump_flags {arch} {
 195     array set archdata [mips_arch_data $arch]
 196     return $archdata(objdump_flags)
 197 }
 198
 199 # mips_arch_matches ARCH PROPMATCHLIST
 200 #
 201 # This function returns non-zero if ARCH matches the set of properties
 202 # described by PROPMATCHLIST.  Each entry in PROPMATCHLIST can either
 203 # be the name of a property which must be matched, or "!" followed by
 204 # the name of a property which must not be matched.  ARCH matches
 205 # PROPMATCHLIST if and only if all of the conditions specified by
 206 # PROPMATCHLIST are satisfied.
 207 proc mips_arch_matches {arch propmatchlist} {
 208     foreach pm $propmatchlist {
 209         if { [string match {!*} $pm] } {
 210             # fail if present.
 211             set inverted 1
 212             set p [string range $pm 1 end]
 213         } {
 214             # fail if not present.
 215             set inverted 0
 216             set p $pm
 217         }
 218
 219         set loc [lsearch -exact [mips_arch_properties $arch] $p]
 220
 221         # required-absent and found, or required-present and not found: fail.
 222         if { ($inverted && $loc != -1) || (! $inverted && $loc == -1) } {
 223             return 0
 224         }
 225     }
 226     return 1
 227 }
 228
 229 # mips_arch_list_matching ARGS
 230 #
 231 # This function returns a list of all architectures which match
 232 # the conditions described by its arguments.  Its arguments are
 233 # taken as a list and used as the PROPMATCHLIST in a call to
 234 # "mips_arch_matches" for each known architecture.
 235 proc mips_arch_list_matching {args} {
 236     set l ""
 237     foreach arch [mips_arch_list_all] {
 238         # For now, don't match default arch until we know what its
 239         # properties actually are.
 240         if { [string compare $arch default] == 0
 241              && [string length [mips_arch_properties default]] == 0} {
 242             continue;
 243         }
 244         if { [mips_arch_matches $arch $args] } {
 245             lappend l $arch
 246         }
 247     }
 248     return $l
 249 }
 250
 251
 252 # The functions below facilitate running various types of tests.
 253
 254 # run_dump_test_arch NAME ARCH
 255 #
 256 # Invoke "run_dump_test" for test NAME, with extra assembler and
 257 # disassembler flags to test architecture ARCH.
 258 proc run_dump_test_arch { name arch } {
 259     global subdir
 260
 261     if [catch {run_dump_test $name \
 262                              "{name    {([mips_arch_displayname $arch])}}
 263                               {objdump {[mips_arch_objdump_flags $arch]}}
 264                               {as      {[mips_arch_as_flags $arch]}}"} rv] {
 265         perror "$rv"
 266         untested "$subdir/$name ($arch)"
 267     }
 268 }
 269
 270 # run_dump_test_arches NAME ARCH_LIST
 271 #
 272 # Invoke "run_dump_test_arch" for test NAME, for each architecture
 273 # listed in ARCH_LIST.
 274 proc run_dump_test_arches { name arch_list } {
 275     foreach arch $arch_list {
 276         run_dump_test_arch "$name" "$arch"
 277     }
 278 }
 279
 280 # run_list_test NAME OPTS (optional): TESTNAME
 281 #
 282 # Assemble the file "NAME.d" and compare the assembler standard error
 283 # output against the regular expressions given in the file "NAME.l".
 284 # The assembler is passed the flags given in OPTS.  If TESTNAME is
 285 # provided, it will be used as the name of the test.
 286 proc run_list_test { name opts {testname {}} } {
 287     global srcdir subdir
 288     if { [string length $testname] == 0 } then {
 289             set testname "MIPS $name"
 290     }
 291     set file $srcdir/$subdir/$name
 292     gas_run ${name}.s $opts ">&dump.out"
 293     if { [regexp_diff "dump.out" "${file}.l"] } then {
 294         fail $testname
 295         verbose "output is [file_contents "dump.out"]" 2
 296         return
 297     }
 298     pass $testname
 299 }
 300
 301 # run_list_test_arch NAME OPTS ARCH
 302 #
 303 # Invoke "run_list_test" for test NAME with options OPTS, with extra
 304 # assembler flags to test architecture ARCH.
 305 proc run_list_test_arch { name opts arch } {
 306     global subdir
 307
 308     set testname "MIPS $name ([mips_arch_displayname $arch])"
 309     if [catch {run_list_test "$name" "$opts [mips_arch_as_flags $arch]" \
 310                              "$testname"} rv] {
 311         perror "$rv"
 312         untested "$testname"
 313     }
 314 }
 315
 316 # run_list_test_arches NAME OPTS ARCH_LIST
 317 #
 318 # Invoke "run_list_test_arch" for test NAME with options OPTS, for each
 319 # architecture listed in ARCH_LIST.
 320 proc run_list_test_arches { name opts arch_list } {
 321     foreach arch $arch_list {
 322         run_list_test_arch "$name" "$opts" "$arch"
 323     }
 324 }
 325
 326
 327 # Create the architecture data array by providing data for all
 328 # known architectures.
 329 #
 330 # Note that several targets pick default CPU based on ABI.  We
 331 # can't easily handle that; do NOT list those targets as defaulting
 332 # to any architecture.
 333 mips_arch_create mips1  32      {}      {} \
 334                         { -march=mips1 -mtune=mips1 } { -mmips:3000 }
 335 mips_arch_create mips2  32      mips1   {} \
 336                         { -march=mips2 -mtune=mips2 } { -mmips:6000 }
 337 mips_arch_create mips3  64      mips2   {} \
 338                         { -march=mips3 -mtune=mips3 } { -mmips:4000 }
 339 mips_arch_create mips4  64      mips3   {} \
 340                         { -march=mips4 -mtune=mips4 } { -mmips:8000 }
 341 mips_arch_create mips5  64      mips4   {} \
 342                         { -march=mips5 -mtune=mips5 } { -mmips:mips5 }
 343 mips_arch_create mips32 32      mips2   {} \
 344                         { -march=mips32 -mtune=mips32 } { -mmips:isa32 } \
 345                         { mipsisa32-*-* mipsisa32el-*-* }
 346 mips_arch_create mips32r2 32    mips32  { ror } \
 347                         { -march=mips32r2 -mtune=mips32r2 } \
 348                         { -mmips:isa32r2 } \
 349                         { mipsisa32r2-*-* mipsisa32r2el-*-* }
 350 mips_arch_create mips64 64      mips5   { mips32 } \
 351                         { -march=mips64 -mtune=mips64 } { -mmips:isa64 } \
 352                         { mipsisa64-*-* mipsisa64el-*-* }
 353 mips_arch_create r3000  32      mips1   {} \
 354                         { -march=r3000 -mtune=r3000 } { -mmips:3000 }
 355 mips_arch_create r3900  32      mips1   {} \
 356                         { -march=r3900 -mtune=r3900 } { -mmips:3900 } \
 357                         { mipstx39-*-* mipstx39el-*-* }
 358 mips_arch_create r4000  64      mips3   {} \
 359                         { -march=r4000 -mtune=r4000 } { -mmips:4000 }
 360 mips_arch_create vr5400 64      mips4   { ror } \
 361                         { -march=vr5400 -mtune=vr5400 } { -mmips:5400 }
 362 mips_arch_create sb1    64      mips64  { mips3d } \
 363                         { -march=sb1 -mtune=sb1 } { -mmips:sb1 } \
 364                         { mipsisa64sb1-*-* mipsisa64sb1el-*-* }
 365
 366
 367 #
 368 # And now begin the actual tests!
 369 #
 370
 371 if { [istarget mips*-*-*] } then {
 372     set no_mips16 0
 373     set elf [expr [istarget *-*-elf*] || [istarget *-*-irix5*] || [istarget *-*-irix6* ] || [istarget *-*-linux*] || [istarget *-*-netbsd*] ]
 374     set ecoff [expr [istarget *-*-ecoff*] || [istarget *-*-ultrix*] || [istarget *-*-irix\[1-4\]*] ]
 375     set aout [expr [istarget *-*-bsd*] || [istarget *-*-openbsd*] ]
 376     set ilocks [istarget mipstx39*-*-*]
 377     set gpr_ilocks [expr [istarget mipstx39*-*-*]]
 378     set addr32 [expr [istarget mipstx39*-*-*]]
 379
 380     if { [istarget "mips*-*-*linux*"] } then {
 381         set tmips "t"
 382     } else {
 383         set tmips ""
 384     }
 385     if [istarget mips*el-*-*] {
 386         set el el
 387     } {
 388         set el ""
 389     }
 390
 391     run_dump_test_arches "abs"          [mips_arch_list_matching mips1]
 392     run_dump_test_arches "add"          [mips_arch_list_matching mips1]
 393     run_dump_test_arches "and"          [mips_arch_list_matching mips1]
 394     run_dump_test "break20"
 395     run_dump_test "trap20"
 396
 397     # LOSE: As of 2002-02-08, "beq" through "bltu" fail for target mips-ecoff.
 398     # See http://sources.redhat.com/ml/binutils/2001-10/msg00418.html for
 399     # more information.  Not sure if the fixes there are correct; should
 400     # branches to external labels be allowed for ECOFF?
 401     # XXX FIXME: the following tests require -mips2 disasm for
 402     # branch-likely instructions.  They should be split.
 403     run_dump_test_arches "beq"          [mips_arch_list_matching mips2]
 404     run_dump_test_arches "bge"          [mips_arch_list_matching mips2]
 405     run_dump_test_arches "bgeu"         [mips_arch_list_matching mips2]
 406     run_dump_test_arches "blt"          [mips_arch_list_matching mips2]
 407     run_dump_test_arches "bltu"         [mips_arch_list_matching mips2]
 408     run_dump_test_arches "branch-misc-1" [mips_arch_list_matching mips1]
 409     run_list_test_arches "branch-misc-2" "" [mips_arch_list_matching mips1]
 410
 411     if $ilocks {
 412         run_dump_test "div-ilocks"
 413     } else {
 414         run_dump_test "div"
 415     }
 416     run_dump_test_arches "dli"          [mips_arch_list_matching mips3]
 417     if $elf {
 418         run_dump_test_arches "elf-jal"  [mips_arch_list_matching mips1]
 419     } else {
 420         run_dump_test "jal"
 421     }
 422     if $elf { run_dump_test "jal-svr4pic" }
 423     if $elf { run_dump_test "jal-xgot" }
 424     # LOSE: As of 2002-02-08, the jal-empic test fails for target mips-ecoff.
 425     # It appears that it broke between 2000-03-11 00:00UTC and
 426     # 2000-03-12 00:00 UTC.
 427     if $ecoff { run_dump_test "jal-empic" }
 428     if $elf {
 429         run_dump_test_arches "jal-empic-elf" [mips_arch_list_matching mips1]
 430         run_dump_test_arches "jal-empic-elf-2" [mips_arch_list_matching mips1]
 431         run_dump_test_arches "jal-empic-elf-3" [mips_arch_list_matching mips1]
 432     }
 433     run_list_test_arches "jal-range" "" [mips_arch_list_matching mips1]
 434     if !$aout { run_dump_test "la" }
 435     if $elf { run_dump_test "la-svr4pic" }
 436     if $elf { run_dump_test "la-xgot" }
 437     # LOSE: As of 2002-02-08, the la-empic test fails for target mips-ecoff.
 438     # Not sure when it first cropped up, but may be related to addition of
 439     # "la" -> "addiu" pattern in MIPS opcode table long ago.
 440     if $ecoff { run_dump_test "la-empic" }
 441     if !$aout {
 442         # XXX FIXME: Has mips2 and later insns with mips1 disassemblies.
 443         # (Should split and then use appropriate arch lists.)
 444         run_dump_test_arches "lb"       [mips_arch_list_matching !mips2]
 445     }
 446     if $elf {
 447         run_dump_test_arches "lb-svr4pic" [mips_arch_list_matching mips1]
 448     }
 449     if $elf {
 450         # Both versions specify the cpu, so we can run both regardless of
 451         # the interlocking in the configured default cpu.
 452         run_dump_test "lb-xgot"
 453         run_dump_test "lb-xgot-ilocks"
 454     }
 455     if $ecoff { run_dump_test "lb-empic" }
 456     if !$aout {
 457         if !$gpr_ilocks {
 458             run_dump_test "ld"
 459         } else {
 460             if !$addr32 {
 461                 run_dump_test "ld-ilocks"
 462             } else {
 463                 run_dump_test "ld-ilocks-addr32"
 464             }
 465         }
 466     }
 467     if $elf { run_dump_test "ld-svr4pic" }
 468     if $elf { run_dump_test "ld-xgot" }
 469     if $ecoff { run_dump_test "ld-empic" }
 470     run_dump_test_arches "li"           [mips_arch_list_matching mips1]
 471     if !$aout { run_dump_test "lifloat" }
 472     if $elf { run_dump_test "lif-svr4pic" }
 473     if $elf { run_dump_test "lif-xgot" }
 474     # LOSE: As of 2002-02-08, the lif-empic test fails for target mips-ecoff.
 475     # It appears that it broke between 2000-03-11 00:00UTC and
 476     # 2000-03-12 00:00 UTC.
 477     if $ecoff { run_dump_test "lif-empic" }
 478     run_dump_test_arches "mips4"        [mips_arch_list_matching mips4]
 479     if $ilocks {
 480         run_dump_test "mul-ilocks"
 481     } else {
 482         run_dump_test "mul"
 483     }
 484
 485     run_dump_test_arches "rol"          [mips_arch_list_matching !ror]
 486     run_dump_test_arches "rol-hw"       [mips_arch_list_matching ror]
 487
 488     run_dump_test_arches "rol64"        [mips_arch_list_matching gpr64 !ror]
 489     run_dump_test_arches "rol64-hw"     [mips_arch_list_matching gpr64 ror]
 490
 491     if !$aout { run_dump_test "sb" }
 492     run_dump_test "trunc"
 493     if !$aout { run_dump_test "ulh" }
 494     if $elf { run_dump_test "ulh-svr4pic" }
 495     if $elf { run_dump_test "ulh-xgot" }
 496     if $ecoff { run_dump_test "ulh-empic" }
 497     if !$aout {
 498         run_dump_test "ulw"
 499         run_dump_test "uld"
 500         run_dump_test "ush"
 501         run_dump_test "usw"
 502         run_dump_test "usd"
 503     }
 504     # The mips16 test can only be run on ELF, because only ELF
 505     # supports the necessary mips16 reloc.
 506     if { $elf && !$no_mips16 } {
 507         run_dump_test "mips16"
 508         # Check jalx handling
 509         run_dump_test "mips16-jalx"
 510         run_dump_test "mips-jalx"
 511     }
 512     run_list_test "mips-no-jalx" ""
 513     run_dump_test "delay"
 514     run_dump_test "nodelay"
 515     run_dump_test "mips4010"
 516     run_dump_test "mips4650"
 517     run_dump_test "mips4100"
 518     run_dump_test "vr4111"
 519     run_dump_test "vr4120"
 520     run_dump_test "vr4122"
 521     run_dump_test "vr5400"
 522     run_dump_test "vr5500"
 523     run_dump_test "perfcount"
 524     run_dump_test "lineno"
 525     run_dump_test "sync"
 526
 527     run_dump_test_arches "mips32"       [mips_arch_list_matching mips32]
 528
 529     run_dump_test_arches "mips32r2"     [mips_arch_list_matching mips32r2]
 530     run_list_test_arches "mips32r2-ill" "" [mips_arch_list_matching mips32r2]
 531
 532     run_dump_test_arches "mips64"       [mips_arch_list_matching mips64]
 533
 534     run_dump_test "mips64-mips3d"
 535     run_dump_test_arches "mips64-mips3d-incl" [mips_arch_list_matching mips3d]
 536
 537     run_dump_test "mips64-mdmx"
 538     run_dump_test "sb1-ext-mdmx"
 539     run_dump_test "sb1-ext-ps"
 540
 541     run_dump_test "relax"
 542
 543     run_list_test "illegal" ""
 544     run_list_test "baddata1" ""
 545
 546     # LOSE: As of 2002-02-08, the next 4 tests fail for target mips-ecoff.
 547     # It's unknown whether they _should_ pass as-is, or whether different
 548     # variants are needed for ELF and ECOFF.
 549     run_dump_test "mips-gp32-fp32"
 550     run_dump_test "mips-gp32-fp64"
 551     run_dump_test "mips-gp64-fp32"
 552     run_dump_test "mips-gp64-fp64"
 553
 554     if $elf {
 555         # Make sure that -mcpu=FOO and -mFOO are equivalent.  Assemble a file
 556         # containing 4650-specific instructions with -m4650 and -mcpu=4650,
 557         # and verify that they're the same.  Specifically, we're checking
 558         # that the EF_MIPS_MACH field is set, and that the 4650 'mul'
 559         # instruction does get used.  In previous versions of GAS,
 560         # only -mcpu=4650 would set the EF_MIPS_MACH field; -m4650 wouldn't.
 561         run_dump_test "elf_e_flags1"
 562         run_dump_test "elf_e_flags2"
 563         run_dump_test "elf_e_flags3"
 564         run_dump_test "elf_e_flags4"
 565
 566         # Check EF_MIPS_ARCH markings for each supported architecture.
 567         run_dump_test "elf_arch_mips1"
 568         run_dump_test "elf_arch_mips2"
 569         run_dump_test "elf_arch_mips3"
 570         run_dump_test "elf_arch_mips4"
 571         run_dump_test "elf_arch_mips5"
 572         run_dump_test "elf_arch_mips32"
 573         run_dump_test "elf_arch_mips32r2"
 574         run_dump_test "elf_arch_mips64"
 575
 576         # Verify that ASE markings are handled properly.
 577         if { !$no_mips16 } { run_dump_test "elf_ase_mips16" }
 578
 579         run_dump_test "mips-gp32-fp32-pic"
 580         run_dump_test "mips-gp32-fp64-pic"
 581         run_dump_test "mips-gp64-fp32-pic"
 582         run_dump_test "mips-gp64-fp64-pic"
 583
 584         run_dump_test "mips-abi32"
 585         run_dump_test "mips-abi32-pic"
 586         run_dump_test "mips-abi32-pic2"
 587
 588         run_dump_test "elf${el}-rel"
 589         if {[istarget mips64*-*-*] || [istarget mipsisa32*-*-*]
 590             || [istarget mipsisa64*-*-*]} {
 591             run_dump_test "elf${el}-rel2"
 592         } else {
 593             run_dump_test "e32${el}-rel2"
 594         }
 595         run_dump_test "elf${el}-rel3"
 596         if {[istarget mips64*-*-*]} {
 597             run_dump_test "elf-rel4"
 598         } else {
 599             run_dump_test "e32-rel4"
 600         }
 601         run_dump_test "elf-rel5"
 602         run_dump_test "elf-rel6"
 603         run_dump_test "elf-rel7"
 604         run_dump_test "${tmips}${el}empic"
 605         run_dump_test "empic2"
 606         run_dump_test "empic3_e"
 607         run_dump_test "empic3_g1"
 608         run_dump_test "empic3_g2"
 609         if { !$no_mips16 } {
 610             run_dump_test "${tmips}mips${el}16-e"
 611             run_dump_test "${tmips}mips${el}16-f"
 612         }
 613         run_dump_test "elf-consthilo"
 614     }
 615
 616     # tests of objdump's ability to disassemble using different
 617     # register names.
 618     run_dump_test "gpr-names-numeric"
 619     run_dump_test "gpr-names-32"
 620     run_dump_test "gpr-names-n32"
 621     run_dump_test "gpr-names-64"
 622
 623     run_dump_test "fpr-names-numeric"
 624     run_dump_test "fpr-names-32"
 625     run_dump_test "fpr-names-n32"
 626     run_dump_test "fpr-names-64"
 627
 628     run_dump_test "cp0-names-numeric"
 629     run_dump_test "cp0-names-mips32"
 630     run_dump_test "cp0-names-mips32r2"
 631     run_dump_test "cp0-names-mips64"
 632     run_dump_test "cp0-names-sb1"
 633
 634     run_dump_test "cp0sel-names-numeric"
 635     run_dump_test "cp0sel-names-mips32"
 636     run_dump_test "cp0sel-names-mips32r2"
 637     run_dump_test "cp0sel-names-mips64"
 638     run_dump_test "cp0sel-names-sb1"
 639
 640     run_dump_test "hwr-names-numeric"
 641     run_dump_test "hwr-names-mips32r2"
 642 }