1 2009-07-02 Pedro Alves <pedro@codesourcery.com>
3 * linux-nat.c (linux_child_follow_fork): If we're staying attached
4 to the child process, enable event reporting on it. Don't handle
5 checkpoints here. Instead, add the child fork to the lwp thread
6 and inferior lists without clobbering the previous inferior. Let
7 the thread_db layer learn about a new child process, even if
9 (linux_nat_switch_fork): Delete lwps of the current inferior only,
10 instead of clearing the whole list. Use thread_change_ptid to
11 give the core the illusion the new checkpoint is still the same
12 inferior. Clear the register cache.
13 (linux_handle_extended_wait): Handle checkpoints here.
14 (linux_multi_process): Turn on.
15 * linux-fork.c (struct fork_info) <pc>: Remove field.
16 (init_fork_list): Do not delete the checkpoint from the inferior
17 list (it is not there).
18 (fork_load_infrun_state): Don't switch inferior_ptid here. Pass
19 the new checkpoint's ptid to linux_nat_switch_fork.
20 (fork_save_infrun_state): Make static. Don't stop the pc field of
22 (linux_fork_mourn_inferior): Don't delete the checkpoint from the
23 inferior list, it's not there.
24 (linux_fork_detach): Ditto.
25 (delete_fork_command): Replace mention of fork/checkpoint by
27 (detach_fork_command): Likewise. Don't delete the checkpoint from
29 (info_forks_command): Adjust.
30 (restore_detach_fork): Delete.
31 (checkpointing_pid): New.
32 (linux_fork_checkpointing_p): New.
33 (save_detach_fork): Delete.
34 (checkpoint_command): Delete temp_detach_fork. Don't remove
35 breakpoints, that's a nop. Store the pid of the process we're
36 checkpointing, and use make_cleanup_restore_integer to restore it.
37 Don't reinsert breakpoints here.
38 (process_command, fork_command): Delete.
39 (restart_command): Update comments to only mention checkpoints,
41 (_initialize_linux_fork): Delete "fork", "process", "info forks"
43 * linux-fork.h (fork_save_infrun_state, fork_list): Delete
45 (linux_fork_checkpointing_p): Declare.
46 * cli/cli-cmds.c (killlist): New.
47 * cli/cli-cmds.h (killlist): Declare.
48 * gdbcmd.h (killlist): Declare.
49 * inferior.c: Include "gdbthread.h".
50 (detach_inferior_command, kill_inferior_command)
51 (inferior_command): New.
52 (info_inferiors_command): Allow specifying a specific inferior id.
53 (_initialize_inferiors): Register "inferior", "kill inferior" and
54 "detach inferior" commands.
55 * infcmd.c (_initialize_infcmd): Make "kill" a prefix command.
56 * gdbthread.h (any_thread_of_process): Declare.
57 * thread.c (any_thread_of_process): New.
59 * NEWS: Mention multi-inferior debugging. Mention 'info
60 inferiors', 'inferior', 'detach inferior' and 'kill inferior' as
62 (Removed commands): New section, mentioning that 'info forks',
63 'fork', 'process', 'delete fork' and 'detach fork' are now gone.
65 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
67 * gdbarch.sh (current_gdbarch): Remove global variable.
68 (find_arch_by_info): Remove, inline into ...
69 (gdbarch_find_by_info): ... this. Remove current_gdbarch swapping.
70 (deprecated_current_gdbarch_select_hack): Rename to ...
71 (deprecated_target_gdbarch_select_hack): ... this. Do not set
72 or access current_gdbarch.
73 * gdbarch.c, gdbarch.h: Regenerate.
75 * arch-utils.c (gdbarch_update_p): Update call.
76 (set_gdbarch_from_file): Likewise.
78 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
80 * defs.h (extract_signed_integer, extract_unsigned_integer,
81 extract_long_unsigned_integer, store_signed_integer,
82 store_unsigned_integer): Add BYTE_ORDER parameter.
83 * findvar.c (extract_signed_integer, extract_unsigned_integer,
84 extract_long_unsigned_integer, store_signed_integer,
85 store_unsigned_integer): Add BYTE_ORDER parameter. Use it
86 instead of current_gdbarch.
88 * gdbcore.h (read_memory_integer, safe_read_memory_integer,
89 read_memory_unsigned_integer, write_memory_signed_integer,
90 write_memory_unsigned_integer): Add BYTE_ORDER parameter.
91 * corefile.c (struct captured_read_memory_integer_arguments): Add
93 (safe_read_memory_integer): Add BYTE_ORDER parameter. Store it into
94 struct captured_read_memory_integer_arguments.
95 (do_captured_read_memory_integer): Pass it to read_memory_integer.
96 (read_memory_integer): Add BYTE_ORDER parameter. Pass it to
97 extract_signed_integer.
98 (read_memory_unsigned_integer): Add BYTE_ORDER parameter. Pass it to
99 extract_unsigned_integer.
100 (write_memory_signed_integer): Add BYTE_ORDER parameter. Pass it
101 to store_signed_integer.
102 (write_memory_unsigned_integer): Add BYTE_ORDER parameter. Pass it
103 to store_unsigned_integer.
105 * target.h (get_target_memory_unsigned): Add BYTE_ORDER parameter.
106 * target.c (get_target_memory_unsigned): Add BYTE_ORDER parameter.
107 Pass it to extract_unsigned_integer.
110 Update calls to extract_signed_integer, extract_unsigned_integer,
111 extract_long_unsigned_integer, store_signed_integer,
112 store_unsigned_integer, read_memory_integer,
113 read_memory_unsigned_integer, safe_read_memory_integer,
114 write_memory_signed_integer, write_memory_unsigned_integer, and
115 get_target_memory_unsigned to pass byte order:
116 * ada-lang.c (ada_value_binop): Update.
117 * ada-valprint.c (char_at): Update.
118 * alpha-osf1-tdep.c (alpha_osf1_sigcontext_addr): Update.
119 * alpha-tdep.c (alpha_lds, alpha_sts, alpha_push_dummy_call,
120 alpha_extract_return_value, alpha_read_insn,
121 alpha_get_longjmp_target): Update.
122 * amd64-linux-tdep.c (amd64_linux_sigcontext_addr): Update.
123 * amd64obsd-tdep.c (amd64obsd_supply_uthread,
124 amd64obsd_collect_uthread, amd64obsd_trapframe_cache): Update.
125 * amd64-tdep.c (amd64_push_dummy_call, amd64_analyze_prologue,
126 amd64_frame_cache, amd64_sigtramp_frame_cache, fixup_riprel,
127 amd64_displaced_step_fixup): Update.
128 * arm-linux-tdep.c (arm_linux_sigreturn_init,
129 arm_linux_rt_sigreturn_init, arm_linux_supply_gregset): Update.
130 * arm-tdep.c (thumb_analyze_prologue, arm_skip_prologue,
131 arm_scan_prologue, arm_push_dummy_call, thumb_get_next_pc,
132 arm_get_next_pc, arm_extract_return_value, arm_store_return_value,
133 arm_return_value): Update.
134 * arm-wince-tdep.c (arm_pe_skip_trampoline_code): Update.
135 * auxv.c (default_auxv_parse): Update.
136 * avr-tdep.c (avr_address_to_pointer, avr_pointer_to_address,
137 avr_scan_prologue, avr_extract_return_value,
138 avr_frame_prev_register, avr_push_dummy_call): Update.
139 * bsd-uthread.c (bsd_uthread_check_magic, bsd_uthread_lookup_offset,
140 bsd_uthread_wait, bsd_uthread_thread_alive,
141 bsd_uthread_extra_thread_info): Update.
142 * c-lang.c (c_printstr, print_wchar): Update.
143 * cp-valprint.c (cp_print_class_member): Update.
144 * cris-tdep.c (cris_sigcontext_addr, cris_sigtramp_frame_unwind_cache,
145 cris_push_dummy_call, cris_scan_prologue, cris_store_return_value,
146 cris_extract_return_value, find_step_target, dip_prefix,
147 sixteen_bit_offset_branch_op, none_reg_mode_jump_op,
148 move_mem_to_reg_movem_op, get_data_from_address): Update.
149 * dwarf2expr.c (dwarf2_read_address, execute_stack_op): Update.
150 * dwarf2-frame.c (execute_cfa_program): Update.
151 * dwarf2loc.c (find_location_expression): Update.
152 * dwarf2read.c (dwarf2_const_value): Update.
153 * expprint.c (print_subexp_standard): Update.
154 * findvar.c (unsigned_pointer_to_address, signed_pointer_to_address,
155 unsigned_address_to_pointer, address_to_signed_pointer,
156 read_var_value): Update.
157 * frame.c (frame_unwind_register_signed,
158 frame_unwind_register_unsigned, get_frame_memory_signed,
159 get_frame_memory_unsigned): Update.
160 * frame-unwind.c (frame_unwind_got_constant): Update.
161 * frv-linux-tdep.c (frv_linux_pc_in_sigtramp,
162 frv_linux_sigcontext_reg_addr, frv_linux_sigtramp_frame_cache):
164 * frv-tdep.c (frv_analyze_prologue, frv_skip_main_prologue,
165 frv_extract_return_value, find_func_descr,
166 frv_convert_from_func_ptr_addr, frv_push_dummy_call): Update.
167 * f-valprint.c (f_val_print): Update.
168 * gnu-v3-abi.c (gnuv3_decode_method_ptr, gnuv3_make_method_ptr):
170 * h8300-tdep.c (h8300_is_argument_spill, h8300_analyze_prologue,
171 h8300_push_dummy_call, h8300_extract_return_value,
172 h8300h_extract_return_value, h8300_store_return_value,
173 h8300h_store_return_value): Update.
174 * hppabsd-tdep.c (hppabsd_find_global_pointer): Update.
175 * hppa-hpux-nat.c (hppa_hpux_fetch_register, hppa_hpux_store_register):
177 * hppa-hpux-tdep.c (hppa32_hpux_in_solib_call_trampoline,
178 hppa64_hpux_in_solib_call_trampoline,
179 hppa_hpux_in_solib_return_trampoline, hppa_hpux_skip_trampoline_code,
180 hppa_hpux_sigtramp_frame_unwind_cache,
181 hppa_hpux_sigtramp_unwind_sniffer, hppa32_hpux_find_global_pointer,
182 hppa64_hpux_find_global_pointer, hppa_hpux_search_pattern,
183 hppa32_hpux_search_dummy_call_sequence,
184 hppa64_hpux_search_dummy_call_sequence, hppa_hpux_supply_save_state,
185 hppa_hpux_unwind_adjust_stub): Update.
186 * hppa-linux-tdep.c (insns_match_pattern,
187 hppa_linux_find_global_pointer): Update.
188 * hppa-tdep.c (hppa_in_function_epilogue_p, hppa32_push_dummy_call,
189 hppa64_convert_code_addr_to_fptr, hppa64_push_dummy_call,
190 skip_prologue_hard_way, hppa_frame_cache, hppa_fallback_frame_cache,
191 hppa_pseudo_register_read, hppa_frame_prev_register_helper,
192 hppa_match_insns): Update.
193 * hpux-thread.c (hpux_thread_fetch_registers): Update.
194 * i386-tdep.c (i386bsd_sigcontext_addr): Update.
195 * i386-cygwin-tdep.c (core_process_module_section): Update.
196 * i386-darwin-nat.c (i386_darwin_sstep_at_sigreturn,
197 amd64_darwin_sstep_at_sigreturn): Update.
198 * i386-darwin-tdep.c (i386_darwin_sigcontext_addr,
199 amd64_darwin_sigcontext_addr): Likewise.
200 * i386-linux-nat.c (i386_linux_sigcontext_addr): Update.
201 * i386nbsd-tdep.c (i386nbsd_sigtramp_cache_init): Update.
202 * i386-nto-tdep.c (i386nto_sigcontext_addr): Update.
203 * i386obsd-nat.c (i386obsd_supply_pcb): Update.
204 * i386obsd-tdep.c (i386obsd_supply_uthread, i386obsd_collect_uthread,
205 i386obsd_trapframe_cache): Update.
206 * i386-tdep.c (i386_displaced_step_fixup, i386_follow_jump,
207 i386_analyze_frame_setup, i386_analyze_prologue,
208 i386_skip_main_prologue, i386_frame_cache, i386_sigtramp_frame_cache,
209 i386_get_longjmp_target, i386_push_dummy_call,
210 i386_pe_skip_trampoline_code, i386_svr4_sigcontext_addr,
211 i386_fetch_pointer_argument): Update.
212 * i387-tdep.c (i387_supply_fsave): Update.
213 * ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Update.
214 * ia64-tdep.c (ia64_pseudo_register_read, ia64_pseudo_register_write,
215 examine_prologue, ia64_frame_cache, ia64_frame_prev_register,
216 ia64_sigtramp_frame_cache, ia64_sigtramp_frame_prev_register,
217 ia64_access_reg, ia64_access_rse_reg, ia64_libunwind_frame_this_id,
218 ia64_libunwind_frame_prev_register,
219 ia64_libunwind_sigtramp_frame_this_id,
220 ia64_libunwind_sigtramp_frame_prev_register, ia64_find_global_pointer,
221 find_extant_func_descr, find_func_descr,
222 ia64_convert_from_func_ptr_addr, ia64_push_dummy_call, ia64_dummy_id,
223 ia64_unwind_pc): Update.
224 * iq2000-tdep.c (iq2000_pointer_to_address, iq2000_address_to_pointer,
225 iq2000_scan_prologue, iq2000_extract_return_value,
226 iq2000_push_dummy_call): Update.
227 * irix5nat.c (fill_gregset): Update.
228 * jv-lang.c (evaluate_subexp_java): Update.
229 * jv-valprint.c (java_value_print): Update.
230 * lm32-tdep.c (lm32_analyze_prologue, lm32_push_dummy_call,
231 lm32_extract_return_value, lm32_store_return_value): Update.
232 * m32c-tdep.c (m32c_push_dummy_call, m32c_return_value,
233 m32c_skip_trampoline_code, m32c_m16c_address_to_pointer,
234 m32c_m16c_pointer_to_address): Update.
235 * m32r-tdep.c (m32r_store_return_value, decode_prologue,
236 m32r_skip_prologue, m32r_push_dummy_call, m32r_extract_return_value):
238 * m68hc11-tdep.c (m68hc11_pseudo_register_read,
239 m68hc11_pseudo_register_write, m68hc11_analyze_instruction,
240 m68hc11_push_dummy_call): Update.
241 * m68linux-tdep.c (m68k_linux_pc_in_sigtramp,
242 m68k_linux_get_sigtramp_info, m68k_linux_sigtramp_frame_cache):
244 * m68k-tdep.c (m68k_push_dummy_call, m68k_analyze_frame_setup,
245 m68k_analyze_register_saves, m68k_analyze_prologue, m68k_frame_cache,
246 m68k_get_longjmp_target): Update.
247 * m88k-tdep.c (m88k_fetch_instruction): Update.
248 * mep-tdep.c (mep_pseudo_cr32_read, mep_pseudo_csr_write,
249 mep_pseudo_cr32_write, mep_get_insn, mep_push_dummy_call): Update.
250 * mi/mi-main.c (mi_cmd_data_write_memory): Update.
251 * mips-linux-tdep.c (mips_linux_get_longjmp_target, supply_32bit_reg,
252 mips64_linux_get_longjmp_target, mips64_fill_gregset,
253 mips64_fill_fpregset, mips_linux_in_dynsym_stub): Update.
254 * mipsnbdsd-tdep.c (mipsnbsd_get_longjmp_target): Update.
255 * mips-tdep.c (mips_fetch_instruction, fetch_mips_16,
256 mips_eabi_push_dummy_call, mips_n32n64_push_dummy_call,
257 mips_o32_push_dummy_call, mips_o64_push_dummy_call,
258 mips_single_step_through_delay, mips_skip_pic_trampoline_code,
259 mips_integer_to_address): Update.
260 * mn10300-tdep.c (mn10300_analyze_prologue, mn10300_push_dummy_call):
262 * monitor.c (monitor_supply_register, monitor_write_memory,
263 monitor_read_memory_single): Update.
264 * moxie-tdep.c (moxie_store_return_value, moxie_extract_return_value,
265 moxie_analyze_prologue): Update.
266 * mt-tdep.c (mt_return_value, mt_skip_prologue, mt_select_coprocessor,
267 mt_pseudo_register_read, mt_pseudo_register_write, mt_registers_info,
268 mt_push_dummy_call): Update.
269 * objc-lang.c (read_objc_method, read_objc_methlist_nmethods,
270 read_objc_methlist_method, read_objc_object, read_objc_super,
271 read_objc_class, find_implementation_from_class): Update.
272 * ppc64-linux-tdep.c (ppc64_desc_entry_point,
273 ppc64_linux_convert_from_func_ptr_addr, ppc_linux_sigtramp_cache):
275 * ppcobsd-tdep.c (ppcobsd_sigtramp_frame_sniffer,
276 ppcobsd_sigtramp_frame_cache): Update.
277 * ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call,
278 do_ppc_sysv_return_value, ppc64_sysv_abi_push_dummy_call,
279 ppc64_sysv_abi_return_value): Update.
280 * ppc-linux-nat.c (ppc_linux_auxv_parse): Update.
281 * procfs.c (procfs_auxv_parse): Update.
282 * p-valprint.c (pascal_val_print): Update.
283 * regcache.c (regcache_raw_read_signed, regcache_raw_read_unsigned,
284 regcache_raw_write_signed, regcache_raw_write_unsigned,
285 regcache_cooked_read_signed, regcache_cooked_read_unsigned,
286 regcache_cooked_write_signed, regcache_cooked_write_unsigned): Update.
287 * remote-m32r-sdi.c (m32r_fetch_register): Update.
288 * remote-mips.c (mips_wait, mips_fetch_registers, mips_xfer_memory):
290 * rs6000-aix-tdep.c (rs6000_push_dummy_call, rs6000_return_value,
291 rs6000_convert_from_func_ptr_addr, branch_dest,
292 rs6000_software_single_step): Update.
293 * rs6000-tdep.c (rs6000_in_function_epilogue_p,
294 ppc_displaced_step_fixup, ppc_deal_with_atomic_sequence,
295 bl_to_blrl_insn_p, rs6000_fetch_instruction, skip_prologue,
296 rs6000_skip_main_prologue, rs6000_skip_trampoline_code,
297 rs6000_frame_cache): Update.
298 * s390-tdep.c (s390_pseudo_register_read, s390_pseudo_register_write,
299 s390x_pseudo_register_read, s390x_pseudo_register_write, s390_load,
300 s390_backchain_frame_unwind_cache, s390_sigtramp_frame_unwind_cache,
301 extend_simple_arg, s390_push_dummy_call, s390_return_value): Update.
302 * scm-exp.c (scm_lreadr): Update.
303 * scm-lang.c (scm_get_field, scm_unpack): Update.
304 * scm-valprint.c (scm_val_print): Update.
305 * score-tdep.c (score_breakpoint_from_pc, score_push_dummy_call,
306 score_fetch_inst): Update.
307 * sh64-tdep.c (look_for_args_moves, sh64_skip_prologue_hard_way,
308 sh64_analyze_prologue, sh64_push_dummy_call, sh64_extract_return_value,
309 sh64_pseudo_register_read, sh64_pseudo_register_write,
310 sh64_frame_prev_register): Update:
311 * sh-tdep.c (sh_analyze_prologue, sh_push_dummy_call_fpu,
312 sh_push_dummy_call_nofpu, sh_extract_return_value_nofpu,
313 sh_store_return_value_nofpu, sh_in_function_epilogue_p): Update.
314 * solib-darwin.c (darwin_load_image_infos): Update.
315 * solib-frv.c (fetch_loadmap, lm_base, frv_current_sos, enable_break2,
316 find_canonical_descriptor_in_load_object): Update.
317 * solib-irix.c (extract_mips_address, fetch_lm_info, irix_current_sos,
318 irix_open_symbol_file_object): Update.
319 * solib-som.c (som_solib_create_inferior_hook, link_map_start,
320 som_current_sos, som_open_symbol_file_object): Update.
321 * solib-sunos.c (SOLIB_EXTRACT_ADDRESS, LM_ADDR, LM_NEXT, LM_NAME):
323 * solib-svr4.c (read_program_header, scan_dyntag_auxv,
324 solib_svr4_r_ldsomap): Update.
325 * sparc64-linux-tdep.c (sparc64_linux_step_trap): Update.
326 * sparc64obsd-tdep.c (sparc64obsd_supply_uthread,
327 sparc64obsd_collect_uthread): Update.
328 * sparc64-tdep.c (sparc64_pseudo_register_read,
329 sparc64_pseudo_register_write, sparc64_supply_gregset,
330 sparc64_collect_gregset): Update.
331 * sparc-linux-tdep.c (sparc32_linux_step_trap): Update.
332 * sparcobsd-tdep.c (sparc32obsd_supply_uthread,
333 sparc32obsd_collect_uthread): Update.
334 * sparc-tdep.c (sparc_fetch_wcookie, sparc32_push_dummy_code,
335 sparc32_store_arguments, sparc32_return_value, sparc_supply_rwindow,
336 sparc_collect_rwindow): Update.
337 * spu-linux-nat.c (parse_spufs_run): Update.
338 * spu-tdep.c (spu_pseudo_register_read_spu,
339 spu_pseudo_register_write_spu, spu_pointer_to_address,
340 spu_analyze_prologue, spu_in_function_epilogue_p,
341 spu_frame_unwind_cache, spu_push_dummy_call, spu_software_single_step,
342 spu_get_longjmp_target, spu_get_overlay_table, spu_overlay_update_osect,
343 info_spu_signal_command, info_spu_mailbox_list, info_spu_dma_cmdlist,
344 info_spu_dma_command, info_spu_proxydma_command): Update.
345 * stack.c (print_frame_nameless_args, frame_info): Update.
346 * symfile.c (read_target_long_array, simple_read_overlay_table,
347 simple_read_overlay_region_table): Update.
348 * target.c (debug_print_register): Update.
349 * tramp-frame.c (tramp_frame_start): Update.
350 * v850-tdep.c (v850_analyze_prologue, v850_push_dummy_call,
351 v850_extract_return_value, v850_store_return_value,
352 * valarith.c (value_binop, value_bit_index): Update.
353 * valops.c (value_cast): Update.
354 * valprint.c (val_print_type_code_int, val_print_string,
355 read_string): Update.
356 * value.c (unpack_long, unpack_double, unpack_field_as_long,
357 modify_field, pack_long): Update.
358 * vax-tdep.c (vax_store_arguments, vax_push_dummy_call,
359 vax_skip_prologue): Update.
360 * xstormy16-tdep.c (xstormy16_push_dummy_call,
361 xstormy16_analyze_prologue, xstormy16_in_function_epilogue_p,
362 xstormy16_resolve_jmp_table_entry, xstormy16_find_jmp_table_entry,
363 xstormy16_pointer_to_address, xstormy16_address_to_pointer): Update.
364 * xtensa-tdep.c (extract_call_winsize, xtensa_pseudo_register_read,
365 xtensa_pseudo_register_write, xtensa_frame_cache,
366 xtensa_push_dummy_call, call0_track_op, call0_frame_cache): Update.
369 * dfp.h (decimal_to_string, decimal_from_string, decimal_from_integral,
370 decimal_from_floating, decimal_to_doublest, decimal_is_zero): Add
371 BYTE_ORDER parameter.
372 (decimal_binop): Add BYTE_ORDER_X, BYTE_ORDER_Y, and BYTE_ORDER_RESULT
374 (decimal_compare): Add BYTE_ORDER_X and BYTE_ORDER_Y parameters.
375 (decimal_convert): Add BYTE_ORDER_FROM and BYTE_ORDER_TO parameters.
376 * dfp.c (match_endianness): Add BYTE_ORDER parameter. Use it
377 instead of current_gdbarch.
378 (decimal_to_string, decimal_from_integral, decimal_from_floating,
379 decimal_to_doublest, decimal_is_zero): Add BYTE_ORDER parameter.
380 Pass it to match_endianness.
381 (decimal_binop): Add BYTE_ORDER_X, BYTE_ORDER_Y, and BYTE_ORDER_RESULT
382 parameters. Pass them to match_endianness.
383 (decimal_compare): Add BYTE_ORDER_X and BYTE_ORDER_Y parameters.
384 Pass them to match_endianness.
385 (decimal_convert): Add BYTE_ORDER_FROM and BYTE_ORDER_TO parameters.
386 Pass them to match_endianness.
387 * valarith.c (value_args_as_decimal): Add BYTE_ORDER_X and
388 BYTE_ORDER_Y output parameters.
389 (value_binop): Update call to value_args_as_decimal.
391 Update calls to decimal_to_string, decimal_from_string,
392 decimal_from_integral, decimal_from_floating, decimal_to_doublest,
393 decimal_is_zero, decimal_binop, decimal_compare and decimal_convert
394 to pass/receive byte order:
395 * c-exp.y (parse_number): Update.
396 * printcmd.c (printf_command): Update.
397 * valarith.c (value_args_as_decimal, value_binop, value_logical_not,
398 value_equal, value_less): Update.
399 * valops.c (value_cast, value_one): Update.
400 * valprint.c (print_decimal_floating): Update.
401 * value.c (unpack_long, unpack_double): Update.
402 * python/python-value.c (valpy_nonzero): Update.
405 * ada-valprint.c (char_at): Add BYTE_ORDER parameter.
406 (printstr): Update calls to char_at.
407 (ada_val_print_array): Likewise.
408 * valprint.c (read_string): Add BYTE_ORDER parameter.
409 (val_print_string): Update call to read_string.
410 * c-lang.c (c_get_string): Likewise.
411 * charset.h (target_wide_charset): Add BYTE_ORDER parameter.
412 * charset.c (target_wide_charset): Add BYTE_ORDER parameter.
413 Use it instead of current_gdbarch.
414 * printcmd.c (printf_command): Update calls to target_wide_charset.
415 * c-lang.c (charset_for_string_type): Add BYTE_ORDER parameter.
416 Pass to target_wide_charset. Use it instead of current_gdbarch.
417 (classify_type): Add BYTE_ORDER parameter. Pass to
418 charset_for_string_type. Allow NULL encoding pointer.
419 (print_wchar): Add BYTE_ORDER parameter.
420 (c_emit_char): Update calls to classify_type and print_wchar.
421 (c_printchar, c_printstr): Likewise.
424 * gdbarch.sh (in_solib_return_trampoline): Convert to type "m".
425 * gdbarch.c, gdbarch.h: Regenerate.
426 * arch-utils.h (generic_in_solib_return_trampoline): Add GDBARCH
428 * arch-utils.c (generic_in_solib_return_trampoline): Likewise.
429 * hppa-hpux-tdep.c (hppa_hpux_in_solib_return_trampoline): Likewise.
430 * rs6000-tdep.c (rs6000_in_solib_return_trampoline): Likewise.
431 (rs6000_skip_trampoline_code): Update call.
433 * alpha-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to
434 dynamic_sigtramp_offset and pc_in_sigtramp callbacks.
435 (alpha_read_insn): Add GDBARCH parameter.
436 * alpha-tdep.c (alpha_lds, alpha_sts): Add GDBARCH parameter.
437 (alpha_register_to_value): Pass architecture to alpha_sts.
438 (alpha_extract_return_value): Likewise.
439 (alpha_value_to_register): Pass architecture to alpha_lds.
440 (alpha_store_return_value): Likewise.
441 (alpha_read_insn): Add GDBARCH parameter.
442 (alpha_skip_prologue): Pass architecture to alpha_read_insn.
443 (alpha_heuristic_proc_start): Likewise.
444 (alpha_heuristic_frame_unwind_cache): Likewise.
445 (alpha_next_pc): Likewise.
446 (alpha_sigtramp_frame_this_id): Pass architecture to
447 tdep->dynamic_sigtramp_offset callback.
448 (alpha_sigtramp_frame_sniffer): Pass architecture to
449 tdep->pc_in_sigtramp callback.
450 * alphafbsd-tdep.c (alphafbsd_pc_in_sigtramp): Add GDBARCH parameter.
451 (alphafbsd_sigtramp_offset): Likewise.
452 * alpha-linux-tdep.c (alpha_linux_sigtramp_offset_1): Add GDBARCH
453 parameter. Pass to alpha_read_insn.
454 (alpha_linux_sigtramp_offset): Add GDBARCH parameter. Pass to
455 alpha_linux_sigtramp_offset_1.
456 (alpha_linux_pc_in_sigtramp): Add GDBARCH parameter. Pass to
457 alpha_linux_sigtramp_offset.
458 (alpha_linux_sigcontext_addr): Pass architecture to alpha_read_insn
459 and alpha_linux_sigtramp_offset.
460 * alphanbsd-tdep.c (alphanbsd_sigtramp_offset): Add GDBARCH parameter.
461 (alphanbsd_pc_in_sigtramp): Add GDBARCH parameter. Pass to
462 alphanbsd_sigtramp_offset.
463 * alphaobsd-tdep.c (alphaobsd_sigtramp_offset): Add GDBARCH parameter.
464 (alphaobsd_pc_in_sigtramp): Add GDBARCH parameter. Pass to
466 (alphaobsd_sigcontext_addr): Pass architecture to
467 alphaobsd_sigtramp_offset.
468 * alpha-osf1-tdep.c (alpha_osf1_pc_in_sigtramp): Add GDBARCH
471 * amd64-tdep.c (amd64_analyze_prologue): Add GDBARCH parameter.
472 (amd64_skip_prologue): Pass architecture to amd64_analyze_prologue.
473 (amd64_frame_cache): Likewise.
475 * arm-tdep.c (SWAP_SHORT, SWAP_INT): Remove.
476 (thumb_analyze_prologue, arm_skip_prologue, arm_scan_prologue,
477 thumb_get_next_pc, arm_get_next_pc): Do not use SWAP_ macros.
478 * arm-wince-tdep.c: Include "frame.h".
480 * avr-tdep.c (EXTRACT_INSN): Remove.
481 (avr_scan_prologue): Add GDBARCH argument, inline EXTRACT_INSN.
482 (avr_skip_prologue): Pass architecture to avr_scan_prologue.
483 (avr_frame_unwind_cache): Likewise.
485 * cris-tdep.c (struct instruction_environment): Add BYTE_ORDER member.
486 (find_step_target): Initialize it.
487 (get_data_from_address): Add BYTE_ORDER parameter.
488 (bdap_prefix): Pass byte order to get_data_from_address.
489 (handle_prefix_assign_mode_for_aritm_op): Likewise.
490 (three_operand_add_sub_cmp_and_or_op): Likewise.
491 (handle_inc_and_index_mode_for_aritm_op): Likewise.
493 * frv-linux-tdep.c (frv_linux_pc_in_sigtramp): Add GDBARCH parameter.
494 (frv_linux_sigcontext_reg_addr): Pass architecture to
495 frv_linux_pc_in_sigtramp.
496 (frv_linux_sigtramp_frame_sniffer): Likewise.
498 * h8300-tdep.c (h8300_is_argument_spill): Add GDBARCH parameter.
499 (h8300_analyze_prologue): Add GDBARCH parameter. Pass to
500 h8300_is_argument_spill.
501 (h8300_frame_cache, h8300_skip_prologue): Pass architecture
502 to h8300_analyze_prologue.
504 * hppa-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to
505 in_solib_call_trampoline callback.
506 (hppa_in_solib_call_trampoline): Add GDBARCH parameter.
507 * hppa-tdep.c (hppa64_convert_code_addr_to_fptr): Add GDBARCH
509 (hppa64_push_dummy_call): Pass architecture to
510 hppa64_convert_code_addr_to_fptr.
511 (hppa_match_insns): Add GDBARCH parameter.
512 (hppa_match_insns_relaxed): Add GDBARCH parameter. Pass to
514 (hppa_skip_trampoline_code): Pass architecture to hppa_match_insns.
515 (hppa_in_solib_call_trampoline): Add GDBARCH parameter. Pass to
516 hppa_match_insns_relaxed.
517 (hppa_stub_unwind_sniffer): Pass architecture to
518 tdep->in_solib_call_trampoline callback.
519 * hppa-hpux-tdep.c (hppa_hpux_search_pattern): Add GDBARCH parameter.
520 (hppa32_hpux_search_dummy_call_sequence): Pass architecture to
521 hppa_hpux_search_pattern.
522 * hppa-linux-tdep.c (insns_match_pattern): Add GDBARCH parameter.
523 (hppa_linux_sigtramp_find_sigcontext): Add GDBARCH parameter.
524 Pass to insns_match_pattern.
525 (hppa_linux_sigtramp_frame_unwind_cache): Pass architecture to
526 hppa_linux_sigtramp_find_sigcontext.
527 (hppa_linux_sigtramp_frame_sniffer): Likewise.
528 (hppa32_hpux_in_solib_call_trampoline): Add GDBARCH parameter.
529 (hppa64_hpux_in_solib_call_trampoline): Likewise.
531 * i386-tdep.c (i386_follow_jump): Add GDBARCH parameter.
532 (i386_analyze_frame_setup): Add GDBARCH parameter.
533 (i386_analyze_prologue): Add GDBARCH parameter. Pass to
534 i386_follow_jump and i386_analyze_frame_setup.
535 (i386_skip_prologue): Pass architecture to i386_analyze_prologue
536 and i386_follow_jump.
537 (i386_frame_cache): Pass architecture to i386_analyze_prologue.
538 (i386_pe_skip_trampoline_code): Add FRAME parameter.
539 * i386-tdep.h (i386_pe_skip_trampoline_code): Add FRAME parameter.
540 * i386-cygwin-tdep.c (i386_cygwin_skip_trampoline_code): Pass
541 frame to i386_pe_skip_trampoline_code.
543 * ia64-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter
544 to sigcontext_register_address callback.
545 * ia64-tdep.c (ia64_find_global_pointer): Add GDBARCH parameter.
546 (ia64_find_unwind_table): Pass architecture to
547 ia64_find_global_pointer.
548 (find_extant_func_descr): Add GDBARCH parameter.
549 (find_func_descr): Pass architecture to find_extant_func_descr
550 and ia64_find_global_pointer.
551 (ia64_sigtramp_frame_init_saved_regs): Pass architecture to
552 tdep->sigcontext_register_address callback.
553 * ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Add
556 * iq2000-tdep.c (iq2000_scan_prologue): Add GDBARCH parameter.
557 (iq2000_frame_cache): Pass architecture to iq2000_scan_prologue.
559 * lm32-tdep.c (lm32_analyze_prologue): Add GDBARCH parameter.
560 (lm32_skip_prologue, lm32_frame_cache): Pass architecture to
561 lm32_analyze_prologue.
563 * m32r-tdep.c (decode_prologue): Add GDBARCH parameter.
564 (m32r_skip_prologue): Pass architecture to decode_prologue.
566 * m68hc11-tdep.c (m68hc11_analyze_instruction): Add GDBARCH parameter.
567 (m68hc11_scan_prologue): Pass architecture to
568 m68hc11_analyze_instruction.
570 * m68k-tdep.c (m68k_analyze_frame_setup): Add GDBARCH parameter.
571 (m68k_analyze_prologue): Pass architecture to
572 m68k_analyze_frame_setup.
574 * m88k-tdep.c (m88k_fetch_instruction): Add BYTE_ORDER parameter.
575 (m88k_analyze_prologue): Add GDBARCH parameter. Pass byte order
576 to m88k_fetch_instruction.
577 (m88k_skip_prologue): Pass architecture to m88k_analyze_prologue.
578 (m88k_frame_cache): Likewise.
580 * mep-tdep.c (mep_get_insn): Add GDBARCH parameter.
581 (mep_analyze_prologue): Pass architecture to mep_get_insn.
583 * mips-tdep.c (mips_fetch_instruction): Add GDBARCH parameter.
584 (mips32_next_pc): Pass architecture to mips_fetch_instruction.
585 (deal_with_atomic_sequence): Likewise.
586 (unpack_mips16): Add GDBARCH parameter, pass to mips_fetch_instruction.
587 (mips16_scan_prologue): Likewise.
588 (mips32_scan_prologue): Likewise.
589 (mips16_in_function_epilogue_p): Likewise.
590 (mips32_in_function_epilogue_p): Likewise.
591 (mips_about_to_return): Likewise.
592 (mips_insn16_frame_cache): Pass architecture to mips16_scan_prologue.
593 (mips_insn32_frame_cache): Pass architecture to mips32_scan_prologue.
594 (mips_skip_prologue): Pass architecture to mips16_scan_prologue
595 and mips32_scan_prologue.
596 (mips_in_function_epilogue_p): Pass architecture to
597 mips16_in_function_epilogue_p and
598 mips32_in_function_epilogue_p.
599 (heuristic_proc_start): Pass architecture to mips_fetch_instruction
600 and mips_about_to_return.
601 (mips_skip_mips16_trampoline_code): Pass architecture to
602 mips_fetch_instruction.
603 (fetch_mips_16): Add GDBARCH parameter.
604 (mips16_next_pc): Pass architecture to fetch_mips_16.
605 (extended_mips16_next_pc): Pass architecture to unpack_mips16 and
608 * objc-lang.c (read_objc_method, read_objc_methlist_nmethods,
609 read_objc_methlist_method, read_objc_object, read_objc_super,
610 read_objc_class): Add GDBARCH parameter.
611 (find_implementation_from_class): Add GDBARCH parameter, pass
612 to read_objc_class, read_objc_methlist_nmethods, and
613 read_objc_methlist_method.
614 (find_implementation): Add GDBARCH parameter, pass to
615 read_objc_object and find_implementation_from_class.
616 (resolve_msgsend, resolve_msgsend_stret): Pass architecture
617 to find_implementation.
618 (resolve_msgsend_super, resolve_msgsend_super_stret): Pass
619 architecture to read_objc_super and find_implementation_from_class.
621 * ppc64-linux-tdep.c (ppc64_desc_entry_point): Add GDBARCH parameter.
622 (ppc64_standard_linkage1_target, ppc64_standard_linkage2_target,
623 ppc64_standard_linkage3_target): Pass architecture to
624 ppc64_desc_entry_point.
625 * rs6000-tdep.c (bl_to_blrl_insn_p): Add BYTE_ORDER parameter.
626 (skip_prologue): Pass byte order to bl_to_blrl_insn_p.
627 (rs6000_fetch_instruction): Add GDBARCH parameter.
628 (rs6000_skip_stack_check): Add GDBARCH parameter, pass to
629 rs6000_fetch_instruction.
630 (skip_prologue): Pass architecture to rs6000_fetch_instruction.
632 * remote-mips.c (mips_store_word): Return old_contents as host
633 integer value instead of target bytes.
635 * s390-tdep.c (struct s390_prologue_data): Add BYTE_ORDER member.
636 (s390_analyze_prologue): Initialize it.
637 (extend_simple_arg): Add GDBARCH parameter.
638 (s390_push_dummy_call): Pass architecture to extend_simple_arg.
640 * scm-lang.c (scm_get_field): Add BYTE_ORDER parameter.
641 * scm-lang.h (scm_get_field): Add BYTE_ORDER parameter.
642 (SCM_CAR, SCM_CDR): Pass SCM_BYTE_ORDER to scm_get_field.
643 * scm-valprint.c (scm_scmval_print): Likewise.
644 (scm_scmlist_print, scm_ipruk, scm_scmval_print): Define
647 * sh64-tdep.c (look_for_args_moves): Add GDBARCH parameter.
648 (sh64_skip_prologue_hard_way): Add GDBARCH parameter, pass to
650 (sh64_skip_prologue): Pass architecture to
651 sh64_skip_prologue_hard_way.
652 * sh-tdep.c (sh_analyze_prologue): Add GDBARCH parameter.
653 (sh_skip_prologue): Pass architecture to sh_analyze_prologue.
654 (sh_frame_cache): Likewise.
656 * solib-irix.c (extract_mips_address): Add GDBARCH parameter.
657 (fetch_lm_info, irix_current_sos, irix_open_symbol_file_object):
658 Pass architecture to extract_mips_address.
660 * sparc-tdep.h (sparc_fetch_wcookie): Add GDBARCH parameter.
661 * sparc-tdep.c (sparc_fetch_wcookie): Add GDBARCH parameter.
662 (sparc_supply_rwindow, sparc_collect_rwindow): Pass architecture
663 to sparc_fetch_wcookie.
664 (sparc32_frame_prev_register): Likewise.
665 * sparc64-tdep.c (sparc64_frame_prev_register): Likewise.
666 * sparc32nbsd-tdep.c (sparc32nbsd_sigcontext_saved_regs): Likewise.
667 * sparc64nbsd-tdep.c (sparc64nbsd_sigcontext_saved_regs): Likewise.
669 * spu-tdep.c (spu_analyze_prologue): Add GDBARCH parameter.
670 (spu_skip_prologue): Pass architecture to spu_analyze_prologue.
671 (spu_virtual_frame_pointer): Likewise.
672 (spu_frame_unwind_cache): Likewise.
673 (info_spu_mailbox_list): Add BYTE_ORER parameter.
674 (info_spu_mailbox_command): Pass byte order to info_spu_mailbox_list.
675 (info_spu_dma_cmdlist): Add BYTE_ORER parameter.
676 (info_spu_dma_command, info_spu_proxydma_command): Pass byte order
677 to info_spu_dma_cmdlist.
679 * symfile.c (read_target_long_array): Add GDBARCH parameter.
680 (simple_read_overlay_table, simple_read_overlay_region_table,
681 simple_overlay_update_1): Pass architecture to read_target_long_array.
683 * v850-tdep.c (v850_analyze_prologue): Add GDBARCH parameter.
684 (v850_frame_cache): Pass architecture to v850_analyze_prologue.
686 * xstormy16-tdep.c (xstormy16_analyze_prologue): Add GDBARCH
688 (xstormy16_skip_prologue, xstormy16_frame_cache): Pass architecture
689 to xstormy16_analyze_prologue.
690 (xstormy16_resolve_jmp_table_entry): Add GDBARCH parameter.
691 (xstormy16_find_jmp_table_entry): Likewise.
692 (xstormy16_skip_trampoline_code): Pass architecture to
693 xstormy16_resolve_jmp_table_entry.
694 (xstormy16_pointer_to_address): Likewise.
695 (xstormy16_address_to_pointer): Pass architecture to
696 xstormy16_find_jmp_table_entry.
698 * xtensa-tdep.c (call0_track_op): Add GDBARCH parameter.
699 (call0_analyze_prologue): Add GDBARCH parameter, pass to
701 (call0_frame_cache): Pass architecture to call0_analyze_prologue.
702 (xtensa_skip_prologue): Likewise.
704 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
706 * defs.h (strlen_paddr, paddr, paddr_nz): Remove.
707 (paddress): Add GDBARCH parameter.
708 * utils.c (strlen_paddr, paddr, paddr_nz): Remove.
709 (paddress): Add GDBARCH parameter, use it instead of current_gdbarch.
710 * ui-out.h (ui_out_field_core_addr): Add GDBARCH parameter.
711 * ui-out.c (ui_out_field_core_addr): Add GDBARCH parameter,
712 use it instead of current_gdbarch.
714 Update calls to ui_out_field_core_addr to pass architecture:
715 * ada-lang.c (print_one_exception): Update.
716 * breakpoint.c (print_one_breakpoint_location,
717 print_one_exception_catchpoint): Update.
718 * disasm.c (dump_insns): Update.
719 * darwin-nat-info.c (darwin_debug_regions_recurse): Update.
720 * mi/mi-main.c (mi_cmd_data_read_memory): Update.
721 * mi/mi-symbol-cmds.c: Include "objfiles.h".
722 (mi_cmd_symbol_list_lines): Update.
723 * stack.c (print_frame_info, print_frame): Update.
725 Update callers of paddress to pass architecture:
726 * ada-tasks.c (info_task): Update.
727 * ada-valprint.c (ada_val_print_1): Update.
728 * annotate.c (annotate_source, annotate_frame_begin): Update.
729 * breakpoint.c (insert_bp_location, describe_other_breakpoints,
731 * cli/cli-cmds.c (edit_command, list_command, print_disassembly):
733 * corefile.c (memory_error): Update.
734 * c-valprint.c (print_function_pointer_address, c_val_print): Update.
735 * disasm.c (dis_asm_print_address): Update.
736 * exec.c (print_section_info): Update.
737 * f-valprint.c (f_val_print): Update.
738 * infcmd.c: Include "arch-utils.h".
739 (jump_command, program_info): Update.
740 * linux-fork.c: Include "arch-utils.h".
741 (info_forks_command): Update.
742 * m2-valprint.c (print_function_pointer_address,
743 print_unpacked_pointer, print_variable_at_address,
744 m2_val_print): Update.
745 * m32r-rom.c (m32r_load_section, m32r_load, m32r_upload_command):
747 * printcmd.c (print_address, print_address_demangle, address_info):
749 * p-valprint.c (pascal_val_print): Update.
750 * source.c: Include "arch-utils.h".
752 * stack.c (frame_info, print_block_frame_labels): Update.
753 * symfile.c (add_symbol_file_command, list_overlays_command): Update.
754 * symmisc.c (dump_msymbols, dump_psymtab, dump_symtab_1,
755 print_symbol, print_partial_symbols, maintenance_info_psymtabs,
756 maintenance_check_symtabs): Update.
757 * symtab.c (find_pc_sect_symtab): Update.
758 * target.c (deprecated_debug_xfer_memory): Update.
759 * tracepoint.c (scope_info): Update.
760 * tui/tui-stack.c (tui_make_status_line): Update.
761 * valprint.c (val_print_string): Update.
763 Update callers of paddr_nz to use paddress instead (keeping
764 user-visible output identical):
765 * alpha-tdep.c (alpha_heuristic_proc_start): Update.
766 * amd64-tdep.c (fixup_riprel, amd64_displaced_step_copy_insn,
767 amd64_displaced_step_fixup): Update.
768 * arch-utils.c (simple_displaced_step_copy_insn): Update.
769 * auxv.c (fprint_target_auxv): Update.
770 * breakpoint.c (insert_single_step_breakpoint): Update.
771 * buildsym.c (finish_block): Update.
772 * cli/cli-dump.c (restore_section_callback): Update.
773 * fbsd-nat.c (fbsd_find_memory_regions): Update.
774 * frame.c (frame_unwind_register_value): Update.
775 * gcore.c (gcore_create_callback): Update.
776 * hppa-tdep.c (hppa_frame_cache, hppa_skip_trampoline_code): Update.
777 * i386-tdep.c (i386_displaced_step_fixup, i386_record_modrm,
778 i386_record_lea_modrm_addr, i386_record_lea_modrm,
779 i386_process_record): Update.
780 * ia64-tdep.c (ia64_frame_this_id, ia64_sigtramp_frame_this_id,
781 ia64_libunwind_frame_this_id, ia64_libunwind_sigtramp_frame_this_id,
782 ia64_dummy_id, ia64_access_reg, ia64_access_rse_reg): Update.
783 * infrun.c (displaced_step_prepare, displaced_step_fixup,
784 handle_inferior_event, insert_step_resume_breakpoint_at_sal,
785 insert_longjmp_resume_breakpoint): Update.
786 * linux-nat.c (linux_nat_find_memory_regions): Update.
787 * linux-record.c (record_linux_system_call): Update.
788 * mips-tdep.c (heuristic_proc_start, mips_eabi_push_dummy_call,
789 mips_n32n64_push_dummy_call, mips_o32_push_dummy_call,
790 mips_o64_push_dummy_call): Update.
791 * monitor.c (monitor_error, monitor_remove_breakpoint): Update.
792 * record.c (record_arch_list_add_mem, record_wait,
793 record_xfer_partial): Update.
794 * remote-mips.c (mips_fetch_word, mips_check_lsi_error,
795 mips_common_breakpoint): Update.
796 * remote-sim.c (gdbsim_xfer_inferior_memory): Update.
797 * rs6000-tdep.c (ppc_displaced_step_fixup): Update.
798 * solib-som.c (som_current_sos): Update.
799 * symfile.c (load_progress, generic_load): Update.
800 * symfile-mem.c (add_vsyscall_page): Update.
801 * valops.c (value_fetch_lazy): Update.
802 * windows-tdep.c (windows_xfer_shared_library): Update.
804 Update callers of paddr_nz to use paddress instead (changing
805 user-visible output to make it more correct):
806 * dwarf2loc.c (locexpr_describe_location): Update.
807 * ia64-tdep.c (ia64_memory_insert_breakpoint,
808 ia64_memory_remove_breakpoint): Update.
809 * jv-valprint.c (java_value_print): Update.
810 * m32c-tdep.c (m32c_m16c_address_to_pointer): Update.
811 * monitor.c (monitor_read_memory): Update.
813 Update callers of paddr to use paddress instead (changing
814 user-visible output to make it more correct):
815 * arm-tdep.c (arm_push_dummy_call): Update.
816 * breakpoint.c (insert_bp_location, create_thread_event_breakpoint,
817 create_breakpoint): Update.
818 * darwin-nat-info.c (darwin_debug_regions): Update.
819 * dcache.c (dcache_info): Update.
820 * dsrec.c (load_srec, make_srec): Update.
821 * dwarf2-frame.c (dwarf2_restore_rule, execute_cfa_program,
822 dwarf2_frame_cache): Update.
823 * gcore.c (gcore_copy_callback): Update.
824 * gnu-nat.c (gnu_xfer_memory): Update.
825 * mips-linux-nat.c (mips_show_dr): Update.
826 * monitor.c (monitor_write_memory, monitor_insert_breakpoint,
827 monitor_remove_breakpoint): Update.
828 * remote.c (compare_sections_command): Update.
829 * remote-m32r-sdi.c (m32r_xfer_memory, m32r_insert_breakpoint,
830 m32r_remove_breakpoint, m32r_insert_watchpoint,
831 m32r_remove_watchpoint): Update.
832 * sol-thread.c (info_cb): Update.
833 * symfile.c (load_progress): Update.
835 Update callers of paddress or paddr_nz to use hex_string instead
836 (changes output of internal/error/debug messages only):
837 * dwarf2read.c (dump_die_shallow): Update.
838 * frame.c (fprint_field, fprint_frame, frame_pc_unwind,
839 get_frame_func, create_new_frame): Update.
840 * hppa-tdep.c (find_unwind_entry, unwind_command): Update.
841 * ia64-tdep.c (get_kernel_table, ia64_find_proc_info_x,
842 ia64_get_dyn_info_list): Update.
843 * maint.c (maintenance_translate_address): Update.
844 * mi/mi-cmd-var.c (mi_cmd_var_create): Update.
845 * target.c (target_flash_erase): Update.
847 Update callers of paddr/paddr_nz to use phex/phex_nz instead,
848 using an appropriate address size. Remove use of strlen_paddr.
849 * exec.c (exec_files_info): Update.
850 * i386-nat.c (i386_show_dr): Update.
851 * remote.c (remote_flash_erase): Update.
852 * m32r-rom.c (m32r_load_section): Update.
853 * monitor.c (monitor_vsprintf, monitor_store_register): Update.
854 * remote.c (remote_check_symbols, remote_search_memory): Update.
855 * remote-mips.c (mips_request, mips_common_breakpoint): Update.
856 * scm-valprint.c (scm_ipruk, scm_scmval_print): Update.
857 * sh64-tdep.c (sh64_show_media_regs, sh64_show_compact_regs): Update.
858 * sh-tdep.c (sh_generic_show_regs, sh3_show_regs, sh2e_show_regs,
859 sh2a_show_regs, sh2a_nofpu_show_regs, sh3e_show_regs,
860 sh3_dsp_show_regs, sh4_show_regs, sh4_nofpu_show_regs,
861 sh_dsp_show_regs): Update.
862 * xcoffsolib.c (sharedlibrary_command): Update.
865 * maint.c (maint_print_section_info): Add ADDR_SIZE parameter.
866 Use hex_string_custom instead of paddr.
867 (print_bfd_section_info): Pass address size.
868 (print_objfile_section_info): Likewise.
870 * annotate.h (annotate_source): Add GDBARCH parameter.
871 (annotate_frame_begin): Likewise.
872 * annotate.c (annotate_source): Add GDBARCH parameter.
873 (annotate_frame_begin): Likewise.
874 * source.c (identify_source_line): Update call to annotate_source.
875 * stack.c (print_frame_info, print_frame): Update call to
876 annotate_frame_begin.
878 * breakpoint.c (describe_other_breakpoints): Add GDBARCH parameter.
879 (create_breakpoint, create_ada_exception_breakpoint): Update call.
881 * stack.c (print_block_frame_labels): Add GDBARCH parameter.
882 (print_frame_label_vars): Update call.
884 * symmisc.c (print_partial_symbols): Add GDBARCH parameter.
885 (dump_psymtab): Update call to print_partial_symbols.
886 (struct print_symbol_args): Add GDBARCH member.
887 (dump_symtab_1): Set print_symbol_args architecture member.
888 (print_symbol): Use it.
890 * windows-tdep.h (windows_xfer_shared_library): Add GDBARCH
892 * windows-tdep.c (windows_xfer_shared_library): Likewise.
893 * i386-cygwin-tdep.c (struct cpms_data): Add GDBARCH member.
894 (core_process_module_section): Pass architecture from cpms_data to
895 windows_xfer_shared_library.
896 (windows_core_xfer_shared_libraries): Initialize cmps_data
898 * windows-nat.c (windows_xfer_shared_libraries): Pass architecture
899 to windows_xfer_shared_library.
901 * defs.h (print_address): Add GDBARCH parameter.
902 * printcmd.c (print_address): Add GDBARCH parameter.
903 (print_scalar_formatted, do_examine): Update call.
904 * findcmd.c (find_command): Update call.
905 * tracepoint.c: Include "arch-utils.h".
906 (trace_find_line_command): Update call.
907 * tui/tui-disasm.c (tui_disassemble): Update call.
909 * value.h (print_address_demangle): Add GDBARCH parameter.
910 * printcmd.c (print_address_demangle): Add GDBARCH parameter.
911 * c-valprint.c (print_function_pointer_address, c_val_print):
913 * f-valprint.c (f_val_print): Update call.
914 * gnu-v3-abi.c (gnuv3_print_method_ptr): Update call.
915 * jv-valprint.c (java_val_print): Update call.
916 * m2-valprint.c (print_function_pointer_address, m2_val_print):
918 * p-valprint.c (pascal_val_print): Update call.
920 * disasm.c (gdb_disassemble_info): Install architecture into
921 di.application_data field.
923 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
925 * disasm.h (gdb_disassembly): Add GDBARCH parameter.
926 (gdb_print_insn): Likewise.
927 * disasm.c (dump_insns): Add GDBARCH parameter. Use it instead
929 (do_mixed_source_and_assembly): Add GDBARCH parameter. Pass to
931 (do_assembly_only): Likewise.
932 (gdb_disassembly): Add GDBARCH parameter. Use it instead of
933 current_gdbarch. Pass to subroutines.
934 (gdb_print_insn): Add GDBARCH parameter. Use it instead of
937 * stack.c (struct gdb_disassembly_stub_args): Add GDBARCH member.
938 (gdb_disassembly_stub): Pass architecture to gdb_disassembly.
939 (do_gdb_disassembly): Add GDBARCH argument. Store into args.
940 (print_frame_info): Pass architecture to do_gdb_disassembly.
942 * printcmd.c (print_formatted): Pass architecture to gdb_print_insn.
944 * mi/mi-cmd-disas.c: Include "arch-utils.h"
945 (mi_cmd_disassemble): Pass architecture to gdb_disassembly.
947 * cli/cli-cmds.c: Include "arch-utils.h".
948 (print_disassembly): Add GDBARCH parameter. Pass to gdb_disassembly
949 and tui_show_assembly.
950 (disassemble_current_function): Pass architecture to
951 tui_get_low_disassembly_address and print_disassembly.
952 (disassemble_command): Pass architecture to
953 tui_get_low_disassembly_address and print_disassembly.
955 * tui/tui.c (tui_show_assembly): Add GDBARCH parameter. Pass to
956 tui_update_source_windows_with_addr.
958 * tui/tui-data.h (struct tui_locator_element): Add GDBARCH member.
959 (struct tui_source_info): Likewise.
960 * tui/tui-data.c (tui_clear_win_detail): Clear source_info.gdbarch.
962 * tui/tui-disasm.c (tui_disassemble): Add GDBARCH parameter.
963 Pass to gdb_print_insn.
964 (tui_find_disassembly_address): Add GDBARCH parameter. Pass to
966 (tui_set_disassem_content): Add GDBARCH parameter. Install into
967 source_info.gdbarch. Pass to tui_disassemble.
968 (tui_show_disassem): Add GDBARCH parameter. Pass to
969 tui_update_source_window.
970 (tui_show_disassem_and_update_source): Add GDBARCH parameter. Pass to
971 tui_show_disassem and tui_update_source_window.
973 (tui_get_begin_asm_address): Return locator architecture in addition
976 (tui_get_low_disassembly_address): Add GDBARCH parameter. Pass to
977 tui_get_low_disassembly_address.
979 (tui_vertical_disassem_scroll): Pass architecture to subroutines.
981 * tui/tui-disasm.h (tui_set_disassem_content): Add GDBARCH parameter.
982 (tui_show_disassem): Likewise.
983 (tui_show_disassem_and_update_source): Likewise.
984 (tui_get_begin_asm_address): Return architecture and PC value.
986 * tui/tui.h (tui_get_low_disassembly_address): Add GDBARCH parameter.
987 (tui_show_assembly): Add GDBARCH parameter.
989 * tui/tui-layout.c (extract_display_start_addr): Return current window
990 architecture in addition to current PC value.
992 (tui_set_layout): Update calls to tui_get_low_disassembly_address and
993 extract_display_start_addr. Pass architecture to
994 tui_update_source_windows_with_addr.
996 * tui/tui-source.c: Include "objfiles.h".
997 (tui_set_source_content): Initialize window architecture.
998 (tui_show_symtab_source): Add GDBARCH parameter. Pass to
999 tui_update_source_window_as_is
1001 * tui/tui-source.h (tui_show_symtab_source): Add GDBARCH parameter.
1003 * tui/tui-stack.c (tui_set_locator_info): Add GDBARCH parameter.
1004 Install locator architecture.
1005 (tui_set_locator_filename): Update call.
1006 (tui_show_frame_info): Pass architecture to tui_set_locator_info
1009 * tui/tui-win.c (make_visible_with_new_height): Pass architecture
1010 to tui_update_source_window.
1012 * tui/tui-winsource.c: Include "objfiles.h".
1013 (tui_display_main): Update call to tui_get_begin_asm_address.
1014 Pass architecture to tui_update_source_windows_with_addr.
1015 (tui_update_source_window): Add GDBARCH parameter. Pass to
1016 tui_update_source_window_as_is.
1017 (tui_update_source_window_as_is): Add GDBARCH parameter.
1018 Pass to tui_set_disassem_content.
1019 (tui_update_source_windows_with_addr): Add GDBARCH parameter.
1020 Pass to subroutines.
1021 (tui_update_source_windows_with_line): Pass objfile architecture
1023 (tui_horizontal_source_scroll): Pass architecture to
1024 tui_update_source_window_as_is.
1026 * tui/tui-winsource.h (tui_update_source_window): Add GDBARCH
1028 (tui_update_source_window_as_is): Likewise.
1029 (tui_update_source_windows_with_addr): Likewise.
1031 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
1033 * breakpoint.h (struct breakpoint): New member GDBARCH.
1034 * breakpoint.c: Include "arch-utils.h".
1035 (set_raw_breakpoint_without_location): Add GDBARCH parameter.
1036 Use it to set breakpoint architecture.
1037 (set_raw_breakpoint): Add GDBARCH parameter.
1038 (create_internal_breakpoint): Likewise.
1039 (create_catchpoint): Likewise.
1040 (create_fork_vfork_event_catchpoint): Likewise.
1041 (create_breakpoint): Likewise.
1042 (create_breakpoints): Likewise.
1043 (break_command_really): Likewise.
1044 (create_ada_exception_breakpoint): Likewise.
1045 Update local callers to pass architecture:
1046 (create_internal_breakpoint): Update.
1047 (create_overlay_event_breakpoint): Update.
1048 (create_longjmp_master_breakpoint): Update.
1049 (create_thread_event_breakpoint): Update.
1050 (create_solib_event_breakpoint): Update.
1051 (create_catchpoint): Update.
1052 (create_fork_vfork_event_catchpoint): Update.
1053 (set_momentary_breakpoint): Update.
1054 (clone_momentary_breakpoint): Update.
1055 (create_breakpoint): Update.
1056 (create_breakpoints): Update.
1057 (break_command_really): Update.
1058 (break_command_1): Update.
1059 (set_breakpoint): Update.
1060 (watch_command_1): Update.
1061 (catch_fork_command_1): Update.
1062 (catch_exec_commnd_1): Update.
1063 (handle_gnu_v3_exceptions): Update.
1064 (create_ada_exception_breakpoint): Update.
1065 (catch_ada_exception_command): Update.
1066 (catch_assert_command): Update.
1067 (trace_command): Update.
1069 * breakpoint.h (struct bp_location): New member GDBARCH.
1070 * breakpoint.c (get_sal_arch): New function.
1071 (set_raw_breakpoint): Set location architecture.
1072 (add_location_to_breakpoint): Likewise.
1073 (clone_momentary_breakpoint): Likewise.
1074 (watch_command_1): Likewise.
1075 (update_watchpoint): Likewise.
1076 (bp_loc_is_permanent): Use location architecture instead of
1078 (adjust_breakpoint_address): Add GDBARCH parameter; use it
1079 instead of current_gdbarch.
1080 Update callers of adjust_breakpoint_address to pass
1081 breakpoint location architecture:
1082 (set_raw_breakpoint): Update.
1083 (watch_command_1): Update.
1085 * tracepoint.c: (collect_symbol): Add GDBARCH parameter, use instead
1087 (add_local_symbols): Add GDBARCH parameter. Pass to collect_symbol.
1088 (encode_actions): Pass tracepoint architecture to add_local_symbols
1089 (encode_actions): Use tracepoint architecture instead of
1090 current_gdbarch. Pass it to add_local_symbols and collect_symbol.
1092 * breakpoint.h (struct breakpoint_ops): Replace last_addr parameter
1093 of print_one callback with last_loc.
1094 * breakpoint.c (print_one_breakpoint_location): Replace last_addr
1095 parameter with last_loc.
1096 (print_one_breakpoint): Likewise.
1097 (do_captured_breakpoint_query): Update call.
1098 (breakpoint_1): Pass last_loc instead of last_addr to
1099 print_one_breakpoint. Pass last location architecture instead of
1100 current_gdbarch to set_next_address.
1101 Update all implementations of the print_one callback:
1102 * breakpoint.c (print_one_catch_fork): Update.
1103 (print_one_catch_vfork): Update.
1104 (print_one_catch_exec): Update.
1105 (print_one_exception_catchpoint): Update.
1106 * ada-lang.c (print_one_exception): Update.
1107 (print_one_catch_exception): Update.
1108 (print_one_catch_exception_unhandled): Update.
1109 (print_one_catch_assert): Update.
1111 * breakpoint.c (print_one_breakpoint_location): Add PRINT_ADDRESS_BITS
1112 parameter. Use it instead of gdbarch_addr_bit (current_gdbarch).
1113 (print_one_breakpoint): Add PRINT_ADDRESS_BITS parameter and pass it
1114 to print_one_breakpoint_location.
1115 (breakpoint_address_bits): New function.
1116 (do_captured_breakpoint_query): Compute number of address bits to print
1117 and pass it to print_one_breakpoint.
1118 (breakpoint_1): Likewise. Use it instead of current_gdbarch.
1120 * breakpoint.h (create_thread_event_breakpoint): Add GDBARCH.
1121 * breakpoint.c (create_thread_event_breakpoint): Likewise.
1122 Update callers to create_thread_event_breakpoint:
1123 * aix-thread.c (pd_enable): Update.
1124 * linux-thread-db.c (enable_thread_event): Update.
1126 * breakpoint.h (create_solib_event_breakpoint): Add GDBARCH.
1127 * breakpoint.c (create_solib_event_breakpoint): Likewise.
1128 Update callers to create_solib_event_breakpoint:
1129 * solib-frv.c (enable_break, enable_break2): Update.
1130 * solib-pa64.c (pa64_solib_create_inferior_hook): Update.
1131 * solib-som.c (som_solib_create_inferior_hook): Update.
1132 * solib-darwin.c (darwin_solib_create_inferior_hook): Update.
1133 * solib-svr4.c (enable_break): Update.
1135 * breakpoint.h (insert_single_step_breakpoint): Add GDBARCH.
1136 * breakpoint.c (insert_single_step_breakpoint): Likewise.
1137 Update callers to insert_single_step_breakpoint:
1138 * alpha-tdep.c (alpha_software_single_step): Update.
1139 * arm-linux-tdep.c (arm_linux_software_single_step): Update.
1140 * arm-tdep.c (arm_software_single_step): Update.
1141 * cris-tdep.c (cris_software_single_step): Update.
1142 * rs6000-aix-tdep.c (rs6000_software_single_step): Update.
1143 * rs6000-tdep.c (ppc_deal_with_atomic_sequence): Update.
1144 * sparc-tdep.c (sparc_software_single_step): Update.
1145 * spu-tdep.c (spu_software_single_step): Update.
1146 * mips-tdep.c (deal_with_atomic_sequence): Add GDBARCH parameter.
1147 Pass it to insert_single_step_breakpoint.
1148 (mips_software_single_step): Pass architecture to
1149 deal_with_atomic_sequence and insert_single_step_breakpoint.
1151 * breakpoint.h (deprecated_insert_raw_breakpoint): Add GDBARCH.
1152 (deprecated_remove_raw_breakpoint): Likewise.
1153 * breakpoint.c (deprecated_insert_raw_breakpoint): Add GDBARCH.
1154 (deprecated_remove_raw_breakpoint): Likewise.
1155 Update callers to deprecated_insert_raw_breakpoint and
1156 deprecated_remove_raw_breakpoint:
1157 * breakpoint.c (single_step_gdbarch): New static variable.
1158 (insert_single_step_breakpoint): Pass GDBARCH parameter to
1159 deprecated_insert_raw_breakpoint. Store it in single_step_gdbarch.
1160 (remove_single_step_breakpoints): Pass architecture stored in
1161 single_step_gdbarch to deprecated_remove_raw_breakpoint.
1162 * rs6000-nat.c (exec_one_dummy_insn): Update.
1163 * solib-irix.c (enable_break, disable_break): Update.
1164 * procfs.c (procfs_mourn_inferior): Update.
1165 (remove_dbx_link_breakpoint): Update.
1167 * breakpoint.h (set_breakpoint): Add GDBARCH parameter.
1168 (set_momentary_breakpoint, set_momentary_breakpoint_at_pc): Likewise.
1169 * breakpoint.c (set_breakpoint): Add GDBARCH parameter.
1170 (set_momentary_breakpoint, set_momentary_breakpoint_at_pc): Likewise.
1171 Update callers to set_breakpoint, set_momentary_breakpoint and
1172 set_momentary_breakpoint_at_pc:
1173 * breakpoint.c (set_momentary_breakpoint_at_pc): Update.
1174 (until_break_command): Update.
1175 * infcall.c (call_function_by_hand): Update.
1176 * infcmd.c (finish_backward, finish_forward): Update.
1177 * infrun.c (insert_step_resume_breakpoint_at_sal): Add GDBARCH
1178 parameter. Pass it to set_momentary_breakpoint.
1179 (insert_longjmp_resume_breakpoint): Add GDBARCH parameter.
1180 Pass it to set_momentary_breakpoint_at_pc.
1181 (handle_inferior_event): Update.
1182 (insert_step_resume_breakpoint_at_frame): Update.
1183 (insert_step_resume_breakpoint_at_caller): Update..
1184 * mi/mi-cmd-break.c: Include "arch-utils.h".
1185 (mi_cmd_break_insert): Update.
1187 * target.h (struct target_ops): Add GDBARCH parameter to
1188 to_insert_breakpoint, to_remove_breakpoint, to_insert_hw_breakpoint,
1189 and to_remove_hw_breakpoint members.
1190 (target_insert_breakpoint, target_remove_breakpoint,
1191 target_insert_hw_breakpoint, target_remove_hw_breakpoint): Add GDBARCH
1192 parameter, pass to target routine.
1193 (memory_remove_breakpoint, memory_insert_breakpoint): Add GDBARCH
1195 * target.c (debug_to_insert_breakpoint, debug_to_remove_breakpoint,
1196 debug_to_insert_hw_breakpoint, debug_to_remove_hw_breakpoint): Add
1197 GDBARCH parameter, pass to target routine.
1198 (update_current_target): Update function signature.
1199 * breakpoint.c (insert_bp_location, remove_breakpoint,
1200 deprecated_insert_raw_breakpoint, deprecated_remove_raw_breakpoint):
1201 Pass architecture to target_ routines.
1202 Update all implementations of the target breakpoint routines to take
1203 GDBARCH parameter and use it instead of GDBARCH as appropriate:
1204 * corelow.c (ignore): Update.
1205 * exec.c (ignore): Update.
1206 * mem-break.c (memory_insert_breakpoint): Update.
1207 (memory_remove_breakpoint): Update.
1208 * monitor.c (monitor_insert_breakpoint): Update.
1209 (monitor_remove_breakpoint): Update.
1210 * record.c (record_insert_breakpoint): Update.
1211 (record_beneath_to_insert_breakpoint): Update.
1212 (record_remove_breakpoint): Update.
1213 (record_beneath_to_remove_breakpoint): Update.
1214 * remote.c (remote_insert_breakpoint): Update.
1215 (remote_remove_breakpoint): Update.
1216 (remote_insert_hw_breakpoint): Update.
1217 (remote_remove_hw_breakpoint): Update.
1218 * remote-m32r-sdi.c (m32r_insert_breakpoint): Update.
1219 (m32r_remove_breakpoint): Update.
1220 * remote-mips.c (mips_insert_breakpoint): Update.
1221 (mips_remove_breakpoint): Update.
1222 * i386-nat.c (i386_insert_hw_breakpoint): Update.
1223 (i386_remove_hw_breakpoint): Update.
1224 * nto-procfs.c (procfs_insert_breakpoint): Update.
1225 (procfs_remove_breakpoint): Update.
1226 (procfs_insert_hw_breakpoint): Update.
1227 (procfs_remove_hw_breakpoint): Update.
1229 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
1231 * frame.h (frame_unwind_arch): New.
1232 (frame_unwind_caller_arch): Likewise.
1233 * frame-unwind.h (frame_prev_arch_ftype): New type.
1234 (struct frame_unwind): New member prev_arch.
1235 * frame.c (struct frame_info): New member prev_arch.
1236 (frame_unwind_arch): New function.
1237 (frame_unwind_caller_arch): Likewise..
1238 (get_frame_arch): Reimplement in terms of frame_unwind_arch.
1239 * sentinel-frame.c (sentinel_frame_prev_arch): New function.
1240 (sentinel_frame_unwinder): Install it.
1242 * frame.c (frame_pc_unwind): Use frame_unwind_arch instead
1244 (frame_unwind_register_value): Likewise.
1245 (frame_unwind_register_signed): Likewise.
1246 (frame_unwind_register_unsigned): Likewise.
1247 * frame-unwind.c (frame_unwind_got_optimized): Likewise.
1248 (frame_unwind_got_register): Likewise.
1249 (frame_unwind_got_constant): Likewise.
1250 (frame_unwind_got_bytes): Likewise.
1251 (frame_unwind_got_address): Likewise.
1253 * frame.h (enum frame_type): New value ARCH_FRAME.
1254 * frame.c (fprint_frame_type): Handle ARCH_FRAME.
1255 * stack.c (print_frame_info): Likewise.
1257 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
1259 * target.h (struct target_ops): New member to_thread_architecture.
1260 (target_thread_architecture): New macro.
1261 * target.c (update_current_target): Inherit to_thread_architecture.
1262 (default_thread_architecture): New function.
1263 (debug_to_thread_architecture): New function.
1264 (setup_target_debug): Handle to_thread_architecture.
1266 * regcache.h (get_thread_arch_regcache): New.
1267 * regcache.c (struct regcache_list): New data type.
1268 (current_regcache): Hold regcache list instead of single regcache.
1269 (current_thread_ptid, current_thread_arch): New static variables.
1270 (get_thread_arch_regcache): New function.
1271 (get_thread_regcache): Use it. Call target_thread_architecture.
1272 (regcache_thread_ptid_changed): Update to current_regcache changes.
1273 (registers_changed): Likewise. Reset current_thread_arch and
1274 current_thread_ptid.
1276 * remote.c (remote_wait): Access target registers in target_gdbarch.
1277 * linux-nat.c (linux_nat_do_thread_registers): Likewise.
1278 * proc-service.c (ps_lgetregs, ps_lsetregs): Likewise.
1279 (ps_lgetfpregs, ps_lsetfpregs): Likewise.
1280 * sol-thread.c (ps_lgetregs, ps_lsetregs): Likewise.
1281 (ps_lgetfpregs, ps_lsetfpregs): Likewise.
1282 * solib-svr4.c (enable_break): Likewise.
1283 (svr4_relocate_main_executable): Likewise.
1285 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
1287 * python/python-internal.h (struct language_defn): Declare.
1288 (python_gdbarch, python_language): Likewise.
1289 (ensure_python_env): Add prototype.
1290 (make_cleanup_py_restore_gil): Remove prototype.
1292 * python/python.c: Include "arch-utils.h", "value.h" and "language.h".
1293 (python_gdbarch, python_language): New global variables.
1294 (struct python_env): New data type.
1295 (ensure_python_env, restore_python_env): New functions.
1296 (eval_python_from_control_command): Call ensure_python_env to
1297 install current architecture and language.
1298 (python_command, gdbpy_new_objfile): Likewise.
1299 * python/python-cmd.c: Include "arch-utils.h" and "language.h".
1300 (cmdpy_destroyer, cmdpy_function, cmdpy_completer): Call
1302 * python/python-type.c (clean_up_objfile_types): Likewise.
1303 * python/python-objfile.c: Include "language.h".
1304 (clean_up_objfile): Call ensure_python_env.
1305 * python/python-prettyprint.c (apply_val_pretty_printer): Likewise.
1306 (apply_varobj_pretty_printer): Do not call PyGILState_Ensure.
1307 * varobj.c (varobj_ensure_python_env): New helper function.
1308 (varobj_get_display_hint, update_dynamic_varobj_children,
1309 install_default_visualizer, varobj_set_visualizer, free_variable,
1310 value_get_print_value): Call it.
1311 (value_get_print_value): Add varobj argument instead of pretty
1312 printer argument. Update all callers.
1314 * python/python-utils.c (py_gil_restore, make_cleanup_py_restore_gil):
1317 * value.h (internal_function_fn): Add GDBARCH and LANGUAGE argument.
1318 (call_internal_function): Likewise.
1319 * value.c (call_internal_function): Likewise. Pass to handler.
1320 * eval.c (evaluate_subexp_standard): Update call.
1321 * python/python-function.c: Include "language.h".
1322 (fnpy_call): Add GDBARCH and LANGAUAGE arguments and call
1323 make_cleanup_python_env.
1325 * python/python-value.c (builtin_type_pyint, builtin_type_pyfloat,
1326 builtin_type_pylong, builtin_type_pybool, builtin_type_pychar,
1327 valpy_str): Use python_gdbarch and python_language instead of
1328 current_gdbarch and current_language.
1329 * python/python-type.c (typy_lookup_typename): Likewise.
1331 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
1333 * arch-utils.c (selected_byte_order): Return target_byte_order_user.
1334 (show_endian): Use target_byte_order_user if specified; otherwise
1335 use get_current_arch () instead of current_gdbarch.
1336 (show_architecture): Use set_architecture_string if specified;
1337 otherwise use get_current_arch () instead of current_gdbarch.
1338 (get_current_arch): New function.
1339 * arch-utils.h (get_current_arch): Add prototype.
1341 * osabi.c (show_osabi): Use get_current_arch () instead of
1344 * findcmd.c: Include "arch-utils.h".
1345 (parse_find_args): Add BIG_P argument. Use it instead of byte order
1347 (find_command): Use get_current_arch () instead of current_gdbarch.
1348 Pass byte order to parse_find_args.
1350 * maint.c: Include "arch-utils.h".
1351 (maintenance_print_architecture): Use get_current_arch () instead
1354 * reggroups.c: Include "arch-utils.h".
1355 (maintenance_print_reggroups): Use get_current_arch () instead
1358 * symfile.c: Include "arch-utils.h".
1359 (overlay_load_command): Use get_current_arch () instead of
1362 * value.c: Include "arch-utils.h".
1363 (show_convenience): Use get_current_arch () instead of
1366 * tui/tui-regs.c: Include "arch-utils.h".
1367 (tui_reg_next_command): Use get_current_arch () instead of
1370 * mi/mi-main.c: Include "arch-utils.h".
1371 (mi_cmd_data_read_memory): Use get_current_arch () instead of
1374 * parse.c: Include "arch-utils.h".
1375 (parse_exp_in_context): Use get_current_arch () instead of
1378 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
1380 * gdbtypes.c (make_pointer_type, make_reference_type,
1381 smash_to_memberptr_type, lookup_array_range_type, check_stub_method):
1382 Use type architecture instead of current_gdbarch.
1384 * gdbtypes.h (address_space_name_to_int, address_space_int_to_name):
1385 Add GDBARCH paramter.
1386 * gdbtypes.c (address_space_name_to_int, address_space_int_to_name):
1387 Add GDBARCH parameter. Use it instead of current_gdbarch.
1388 * c-typeprint.c (c_type_print_modifier): Update call.
1389 * parse.c (push_type_address_space): Likewise.
1391 * findvar.c (extract_typed_address, store_typed_address): Use type
1392 architecture instead of current_gdbarch.
1394 * value.c (value_as_address, unpack_field_as_long): Use type architecture
1395 instead of current_gdbarch.
1397 * doublest.c (floatformat_from_length): Add GDBARCH argument. Use it
1398 instead of current_gdbarch.
1399 (floatformat_from_type): Pass type architecture.
1401 * infcall.c (find_function_addr): Use type architecture instead
1404 * valarith.c (value_bitstring_subscript, value_x_binop, value_neg,
1405 value_bit_index): Use type architecture instead of current_gdbarch.
1406 * valops.c (value_cast, value_slice): Likewise.
1408 * value.h (modify_field): Add TYPE argument.
1409 * value.c (modify_field): Add TYPE argument. Use type architecture
1410 instead of current_gdbarch.
1411 (set_internalvar_component): Likewise.
1412 * eval.c (evaluate_struct_tuple): Update call.
1413 * valops.c (value_assign): Likewise.
1414 * ada-lang.c (modify_general_field): Likewise. Add TYPE argument.
1415 (make_array_descriptor): Update calls.
1416 (move_bits): Add BITS_BIG_ENDIAN_P argument. Use it instead of
1418 (ada_value_assign, value_assign_to_component): Update calls.
1419 (decode_packed_array, ada_value_primitive_packed_val, ada_value_assign,
1420 value_assign_to_component): Use type arch instead of current_gdbarch.
1422 * printcmd.c (float_type_from_length): Remove GDBARCH argument,
1423 use type architecture instead.
1424 (print_scalar_formatted, printf_command): Update calls. Use type
1425 architecture instead of current_gdbarch.
1426 * valprint.c (val_print_type_code_int): Use type architecture
1427 instead of current_gdbarch.
1428 * varobj.c (value_get_print_value): Likewise.
1429 * python/python-prettyprint.c (print_string_repr): Add GDBARCH
1430 argument. Use it instead of current_gdbarch.
1431 (apply_val_pretty_printer): Update call.
1433 * ada-valprint.c (ada_val_print_1): Use type architecture instead
1435 * c-valprint.c (print_function_pointer_address): Add GDBARCH argument.
1436 Use it instead of current_gdbarch.
1437 (c_val_print): Update calls passing type architecture.
1438 * f-valprint.c (f_val_print): Use type architecture instead of
1440 * jv-valprint (java_value_print): Likewise.
1441 * m2-valprint.c (print_function_pointer_address): Add GDBARCH argument.
1442 Use it instead of current_gdbarch.
1443 (print_unpacked_pointer): Update calls passing type architecture.
1444 * scm-valprint.c (scm_scmval_print): Use type architecture instead of
1447 * gnu-v3-abi.c (get_class_arch): Remove.
1448 (gnuv3_rtti_type): Use get_type_arch instead of get_class_arch. Remove
1449 special-case check for Java classes.
1450 (gnuv3_virtual_fn_field, gnuv3_baseclass_offset, gnuv3_print_method_ptr,
1451 gnuv3_method_ptr_size, gnuv3_make_method_ptr, gnuv3_method_ptr_to_value):
1452 Use get_type_arch instead of get_class_arch.
1454 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
1456 * gdbtypes.h (TYPE_OBJFILE_OWNED, TYPE_OWNER): New macros.
1457 (TYPE_OBJFILE, TYPE_ALLOC, TYPE_ZALLOC): Reimplement.
1458 (alloc_type_arch): Add prototype.
1459 (alloc_type_copy): Likewise.
1460 (get_type_arch): Likewise.
1461 (arch_type): Likewise.
1462 (arch_integer_type): Likewise.
1463 (arch_character_type): Likewise.
1464 (arch_boolean_type): Likewise.
1465 (init_float_type): Remove, replace by ...
1466 (arch_float_type): ... this.
1467 (init_complex_type): Remove, replace by ...
1468 (arch_complex_type): ... this.
1469 (init_flags_type): Remove, replace by ...
1470 (arch_flags_type): ... this.
1471 (init_composite_type): Remove, replace by ...
1472 (arch_composite_type): ... this.
1474 * gdbtypes.c (alloc_type): No longer support NULL objfile.
1475 (init_type): Likewise.
1476 (alloc_type_arch): New function.
1477 (alloc_type_copy): New function.
1478 (get_type_arch): New function.
1480 (smash_type): Preserve type ownership information.
1481 (make_pointer_type, make_reference_type, make_function_type,
1482 smash_to_memberptr_type, smash_to_method_type): No longer
1483 preserve OBJFILE across smash_type calls.
1484 (make_pointer_type, make_reference_type, make_function_type,
1485 lookup_memberptr_type, lookup_methodptr_type, allocate_stub_method,
1486 create_range_type, create_array_type, create_set_type, copy_type):
1487 Use alloc_type_copy when allocating types.
1488 (check_typedef): Use alloc_type_arch.
1489 (copy_type_recursive): Likewise. Preserve type ownership data
1491 (recursive_dump_type): Dump type ownership data.
1492 (alloc_type_instance): Update type ownership check.
1493 (copy_type, copy_type_recursive): Likewise.
1495 (arch_type): New function.
1496 (arch_integer_type): Likewise.
1497 (arch_character_type): Likewise.
1498 (arch_boolean_type): Likewise.
1499 (init_float_type): Remove, replace by ...
1500 (arch_float_type): ... this.
1501 (init_complex_type): Remove, replace by ...
1502 (arch_complex_type): ... this.
1503 (init_flags_type): Remove, replace by ...
1504 (arch_flags_type): ... this.
1505 (append_flags_type_flag): Move down.
1506 (init_composite_type): Remove, replace by ...
1507 (arch_composite_type): ... this.
1508 (append_composite_type_field_aligned,
1509 append_composite_type_field): Move down.
1511 * gdbarch.c (gdbtypes_post_init): Allocate all types
1512 using per-architecture routines.
1513 * ada-lang.c (ada_language_arch_info): Likewise.
1514 * f-lang.c (build_fortran_types): Likewise.
1515 * jv-lang.c (build_java_types): Likewise.
1516 * m2-lang.c (build_m2_types): Likewise.
1517 * scm-lang.c (build_scm_types): Likewise.
1519 * ada-lang.c (ada_type_of_array): Use alloc_type_copy.
1520 (packed_array_type): Likewise.
1521 (ada_template_to_fixed_record_type_1): Likewise.
1522 (template_to_static_fixed_type): Likewise.
1523 (to_record_with_fixed_variant_part): Likewise.
1524 (to_fixed_variant_branch_type): Likewise.
1525 (to_fixed_array_type): Likewise.
1526 (to_fixed_range_type): Likewise.
1527 (empty_record): Use type instead of objfile argument.
1528 Use alloc_type_copy.
1529 (to_fixed_variant_branch_type): Update call to empty_record.
1530 * jv-lang.c (type_from_class): Use alloc_type_arch.
1532 * arm-tdep.c (arm_ext_type): Allocate per-architecture type.
1533 * i386-tdep.c (i386_eflags_type, i386_mxcsr_type, i387_ext_type,
1534 i386_mmx_type, i386_sse_type): Likewise.
1535 * ia64-tdep.c (ia64_ext_type): Likewise.
1536 * m32c-tdep.c (make_types): Likewise.
1537 * m68k-tdep.c (m68k_ps_type, m68881_ext_type): Likewise.
1538 * rs6000-tdep.c (rs6000_builtin_type_vec64,
1539 rs6000_builtin_type_vec128): Likewise.
1540 * sparc-tdep.c (sparc_psr_type, sparc_fsr_type): Likewise.
1541 * sparc64-tdep.c (sparc64_pstate_type, sparc64_fsr_type,
1542 sparc64_fprs_type): Likewise.
1543 * spu-tdep.c (spu_builtin_type_vec128): Likewise.
1544 * xtensa-tdep.c (xtensa_register_type): Likewise.
1545 * linux-tdep.c (linux_get_siginfo_type): Likewise.
1546 * target-descriptions.c (tdesc_gdb_type): Likewise.
1547 * gnu-v3-abi.c (build_gdb_vtable_type): Likewise.
1549 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
1551 * i386-tdep.h (struct gdbarch_tdep): Add i386_eflags_type and
1552 i386_mxcsr_type members.
1553 (i386_eflags_type): Make into function.
1554 (i386_mxcsr_type): Likewise.
1555 * i386-tdep.c (i386_eflags_type): Make into function.
1556 (i386_mxcsr_type): Likewise.
1557 (i386_register_type): Update uses.
1558 (i386_init_types): Remove.
1559 (_initialize_i386_tdep): Do not call it.
1560 * amd64-tdep.c (amd64_register_type): Update uses.
1562 * m68k-tdep.h (struct gdbarch_tdep): Add m68k_ps_type member.
1563 * m68k-tdep.c (m68k_ps_type): Make into function.
1564 (m68k_register_type): Update use.
1565 (m68k_init_types): Remove.
1566 (_initialize_m68k_tdep): Do not call it.
1568 * sparc-tdep.h (struct gdbarch_tdep): Add sparc_psr_type,
1569 sparc_fsr_type, sparc64_pstate_type, sparc64_fsr_type, and
1570 sparc64_fprs_type members.
1571 * sparc-tdep.c (sparc_psr_type): Make into function.
1572 (sparc_fsr_type): Likewise.
1573 (sparc32_register_type): Update uses.
1574 (sparc_init_types): Remove.
1575 (_initialize_sparc_tdep): Do not call it.
1576 * sparc64-tdep.c (sparc64_pstate_type): Make into function.
1577 (sparc64_fsr_type): Likewise.
1578 (sparc64_fprs_type): Likewise.
1579 (sparc64_register_type): Update uses.
1580 (sparc64_init_types): Remove.
1581 (_initialize_sparc64_tdep): Likewise.
1583 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
1585 * gdbtypes.h (builtin_type_ieee_single, builtin_type_ieee_double,
1586 builtin_type_i387_ext, builtin_type_m68881_ext, builtin_type_arm_ext,
1587 builtin_type_ia64_spill, builtin_type_ia64_quad): Remove.
1588 (init_float_type, init_complex_type): Add prototypes.
1589 * gdbtypes.c (builtin_type_ieee_single, builtin_type_ieee_double,
1590 builtin_type_i387_ext, builtin_type_m68881_ext, builtin_type_arm_ext,
1591 builtin_type_ia64_spill, builtin_type_ia64_quad): Remove.
1592 (_initialize_gdbtypes): Do not initialize them.
1593 (build_flt): Rename to ...
1594 (init_float_type): ... this. Make global.
1595 (build_complex): Rename to ...
1596 (init_complex_type): ... this. Make global. Remove BIT argument.
1597 (gdbtypes_post_init): Update calls.
1599 * ada-lang.c (ada_language_arch_info): Use init_float_type.
1600 * jv-lang.c (build_java_types): Likewise.
1601 * m2-lang.c (build_m2_types): Likewise.
1602 * f-lang.c (build_fortran_types): Use init_float_type and
1605 * target-descriptions.c (tdesc_gdb_type): Call init_float_type instead
1606 of using builtin_type_ieee_single, builtin_type_ieee_double, or
1607 builtin_type_arm_ext.
1609 * ia64-tdep.h (struct gdbarch_tdep): Add ia64_ext_type member.
1610 * ia64-tdep.c (builtin_type_ia64_ext): Remove.
1611 (_initialize_ia64_tdep): Do not initialize it.
1612 (floatformat_valid, floatformat_ia64_ext, floatformats_ia64_ext):
1614 (ia64_ext_type): New function.
1615 (ia64_register_reggroup_p, ia64_convert_register_p,
1616 ia64_register_to_value, ia64_value_to_register,
1617 ia64_extract_return_value, ia64_store_return_value): Use ia64_ext_type
1618 instead of builtin_type_ia64_ext.
1620 * i386-tdep.h (struct gdbarch_tdep): Add i387_ext_type member.
1621 (i387_ext_type): Add prototype.
1622 * i386-tdep.c (i387_ext_type): New function.
1623 (i386_extract_return_value, i386_store_return_value,
1624 i386_register_type): Use it instead of builtin_type_i387_ext.
1625 * amd64-tdep.c (amd64_register_type): Likewise.
1626 * i387-tdep.c (print_i387_value, i387_register_to_value,
1627 i387_value_to_register): Likewise.
1628 (print_i387_value, print_i387_ext): Add GDBARCH argument.
1629 (print_i387_ext, i387_print_float_info): Pass to subroutines.
1631 * m68k-tdep.h (struct gdbarch_tdep): Add m68881_ext_type member.
1632 * m68k-tdep.c (m68881_ext_type): New function.
1633 (m68k_register_type, m68k_convert_register_p): Use it instead
1634 of builtin_type_m68881_ext.
1636 * arm-tdep.h (struct gdbarch_tdep): Add arm_ext_type member.
1637 * arm-tdep.c (arm_ext_type): New function.
1638 (arm_register_type): Use it instead of builtin_type_arm_ext.
1640 * alpha-tdep.c (alpha_register_type): Use builtin types
1641 instead of builtin_type_ieee_double.
1643 * mips-tdep.c (mips_float_register_type, mips_double_register_type):
1645 (mips_register_type): Use builtin types instead of
1646 builtin_type_ieee_single and builtin_type_ieee_double.
1647 (mips_print_fp_register): Use builtin types instead of
1648 mips_float_register_type and mips_double_register_type.
1650 * hppa-tdep.c (hppa32_register_type, hppa64_register_type):
1651 Use builtin types instead of builtin_type_ieee_single and
1652 builtin_type_ieee_double.
1654 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
1656 * gdbtypes.h (builtin_type_int0, builtin_type_int8, builtin_type_uint8,
1657 builtin_type_int16, builtin_type_uint16, builtin_type_int32,
1658 builtin_type_uint32, builtin_type_int64, builtin_type_uint64,
1659 builtin_type_int128, builtin_type_uint128): Remove.
1660 (struct builtin_type): New members builtin_int0, builtin_int8,
1661 builtin_uint8, builtin_int16, builtin_uint16, builtin_int32,
1662 builtin_uint32, builtin_int64, builtin_uint64, builtin_int128,
1663 and builtin_uint128.
1664 * gdbtypes.c (builtin_type_int0, builtin_type_int8, builtin_type_uint8,
1665 builtin_type_int16, builtin_type_uint16, builtin_type_int32,
1666 builtin_type_uint32, builtin_type_int64, builtin_type_uint64,
1667 builtin_type_int128, builtin_type_uint128): Remove.
1668 (_initialize_gdbtypes): Do not initialize them.
1669 (gdbtypes_post_init): Initialize fixed-size integer types.
1671 * dwarf2expr.c (unsigned_address_type, signed_address_type): Add
1672 GDBARCH argument. Return platform-specific type.
1673 (dwarf2_read_address, execute_stack_op): Update calls.
1675 * target-descriptions.c (tdesc_gdb_type): Use platform-specific types
1676 instead of global builtin_int_... variables.
1677 * mi/mi-main.c (mi_cmd_data_read_memory): Likewise.
1678 * printcmd.c (do_examine): Likewise.
1679 * jv-exp.y (parse_number): Likewise.
1681 * alpha-tdep.c (alpha_register_type, alpha_push_dummy_call,
1682 alpha_store_return_value): Likewise.
1683 * amd64-linux-tdep.c (amd64_linux_register_type): Likewise.
1684 * amd64-tdep.c (amd64_register_type): Likewise.
1685 * arm-tdep.c (arm_register_type): Likewise.
1686 * avr-tdep.c (avr_register_type): Likewise.
1687 * cris-tdep.c (cris_register_type, crisv32_register_type): Likewise.
1688 * frv-tdep.c (frv_register_type): Likewise.
1689 * h8300-tdep.c h8300_register_type): Likewise.
1690 * hppa-tdep.c (hppa64_push_dummy_call, hppa32_register_type,
1691 hppa64_register_type): Likewise.
1692 * i386-tdep.c (i386_mmx_type, i386_sse_type): Likewise.
1693 * iq2000-tdep.c (iq2000_register_type): Likewise.
1694 * lm32-tdep.c (lm32_register_type, lm32_push_dummy_call): Likewise.
1695 * m32r-tdep.c (m32r_register_type): Likewise.
1696 * m68hc11-tdep.c (m68hc11_register_type, m68hc11_pseudo_register_read,
1697 m68hc11_pseudo_register_write): Likewise.
1698 * m68k-tdep.c (m68k_register_type): Likewise.
1699 * m88k-tdep.c (m88k_register_type, m88k_store_arguments): Likewise.
1700 * mep-tdep.c (mep_register_type): Likewise.
1701 * mips-tdep.c (mips_register_type, mips_pseudo_register_type,
1702 mips_print_fp_register): Likewise.
1703 * moxie-tdep.c (moxie_register_type): Likewise.
1704 * mt-tdep.c (mt_copro_register_type, mt_register_type): Likewise.
1705 * rs6000-tdep.c (rs6000_builtin_type_vec64,
1706 rs6000_builtin_type_vec128): Likewise.
1707 * score-tdep.c (score_register_type): Likewise.
1708 * sparc-tdep.c (sparc32_register_type, sparc32_store_arguments):
1710 * sparc64-tdep.c (sparc64_register_type, sparc64_store_arguments):
1712 * spu-tdep.c (spu_builtin_type_vec128, spu_register_type): Likewise.
1713 * v850-tdep.c (v850_register_type): Likewise.
1714 * xstormy16-tdep.c (xstormy16_register_type): Likewise.
1715 * xtensa-tdep.c (xtensa_register_type): Likewise.
1717 * mt-tdep.c (struct gdbarch_tdep): New data structure.
1718 (mt_gdbarch_init): Alloc TDEP structures.
1719 (mt_register_type): Cache coprocessor type in TDEP instead of
1720 static global variable.
1722 * xtensa-tdep.h (struct gdbarch_tdep): Add type_entries member.
1723 * xtensa-tdep.c (type_entries): Remove.
1724 (xtensa_register_type): Cache fixed-size types in TDEP instead
1725 of in global variable.
1727 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
1729 * gdbtypes.h (builtin_type_true_char): Remove.
1730 (builtin_type_true_unsigned_char): Likewise.
1731 (struct builtin_type): Add builtin_true_char and
1732 builtin_true_unsigned_char members.
1733 * gdbtypes.c (builtin_type_true_char): Remove.
1734 (builtin_type_true_unsigned_char): Likewise.
1735 (_initialize_gdbtypes): Do not initialize them.
1736 (gdbtypes_post_init): Initialize builtin_true_char and
1737 builtin_true_unsigned_char members of builtin_type.
1739 * printcmd.c (print_scalar_formatted): Use builtin_type
1740 members instead of builtin_type_true_char and
1741 builtin_type_true_unsigned_char.
1742 * ada-valprint.c (ada_val_print_1): Likewise.
1744 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
1746 * gdbtypes.h (builtin_type_void): Remove.
1747 * gdbtypes.c (builtin_type_void): Remove.
1748 (_initialize_gdbtypes): Do not initialize it.
1750 (safe_parse_type): Add GDBARCH argument. Use it to construct
1752 (check_stub_method): Update call.
1754 * infcall.c (call_function_by_hand): Use platform-specific type
1755 instead of builtin_type_void.
1756 * valops.c (value_cast): Use input void type instead of
1759 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
1761 * ada-lang.c (assign_component): Use platform-specific integer type
1762 instead of builtin_type_int32 type.
1763 (ada_evaluate_subexp) [OP_ATR_SIZE]: Likewise.
1765 * ax-gdb.c (gen_expr) [UNOP_NEG]: Use platform-specific integer type
1766 instead of builtin_type_int8 type.
1767 * valarith.c (value_x_unop): Likewise.
1768 * python/python-value.c (valpy_absolute): Avoid reference to
1769 builtin_type_int8 type.
1771 * eval.c (evaluate_subexp_standard): Use platform-specific integer
1772 type instead of builtin_type_int8 as EVAL_SKIP return value type.
1773 * ada-lang.c (ada_evaluate_subexp): Likewise.
1774 * jv-lang.c (evaluate_subexp_java): Likewise.
1775 * m2-lang.c (evaluate_subexp_modula2): Likewise.
1776 * scm-lang.c (evaluate_exp): Likewise.
1778 * value.h (value_bitstring): Add INDEX_TYPE argument.
1779 * valops.c (value_bitstring): Add INDEX_TYPE argument, use it instead
1780 of builtin_type_int32 as base range type.
1781 * eval.c (evaluate_subexp_standard): Update value_bitstring call.
1783 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
1785 * gdbtypes.c (lookup_array_range_type): Add prototype.
1786 (lookup_string_range_type): Likewise.
1787 * gdbtypes.c (lookup_array_range_type): New function.
1788 (lookup_string_range_type): Likewise.
1790 * ax-gdb.c (gen_repeat): Use lookup_array_range_type.
1791 * parse.c (follow_types): Likewise.
1792 * jv-lang.c (java_array_type): Likewise.
1793 * gnu-v3-abi.c (build_gdb_vtable_type): Likewise.
1794 * mt-tdep.c (mt_register_type): Likewise.
1795 * sh-tdep.c (sh_sh4_build_float_register_type): Likewise.
1796 * sh64-tdep.c (sh64_build_float_register_type): Likewise.
1797 * value.c (allocate_repeat_value): Likewise.
1798 * valops.c (value_array, value_cstring): Likewise.
1799 * valops.c (value_string): Use lookup_string_range_type.
1801 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
1803 * m2-typeprint.c (m2_print_bounds, m2_is_long_set_of_type): Remove
1804 redundant check for NULL TYPE_TARGET_TYPE.
1805 * m2-valprint.c (m2_print_long_set): Likewise.
1806 * p-valprint.c (pascal_type_print_base): Likewise.
1808 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
1810 * printcmd.c (next_gdbarch): New static variable.
1811 (set_next_address, do_examine, x_command): Set it.
1812 (decode_format): Use 'a' size to indicate width of an address.
1813 (do_examine): Add GDBARCH argument. Handle 'a' size.
1814 (x_command): Pass architecture to do_examine.
1815 Error if called without argument the first time.
1816 (do_one_display): Pass architecture to do_examine.
1818 (examine_i_type, examine_b_type, examine_h_type, examine_w_type,
1819 examine_g_type): Remove.
1820 (_initialize_printcmd): Do not initialize them.
1821 (do_examine): Use builin_type_int... instead of examine_..._type.
1823 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
1825 * gdbtypes.h (struct builtin_type): Add internal_fn member.
1826 * gdbtypes.c (gdbtypes_post_init): Initialize it.
1827 * value.c (internal_fn_type): Remove.
1828 (_initialize_values): Do not initialize it.
1830 * value.c (struct internalvar): Add enum internalvar_kind type and
1831 kind member. Restructure union internalvar_data type. Remove type,
1832 canonical, and make_value members.
1833 (init_if_undefined_command): Update for data structure changes.
1834 (create_internalvar): Likewise.
1835 (create_internalvar_type_lazy): Likewise.
1836 (get_internalvar_integer): Likewise.
1837 (get_internalvar_function): Likewise.
1838 (set_internalvar_component): Likewise.
1839 (set_internalvar): Likewise.
1840 (set_internalvar_integer): Likewise.
1841 (set_internalvar_function): Likewise.
1842 (clear_internalvar): Likewise.
1843 (add_internal_function): Likewise.
1844 (preserve_one_internalvar): New function.
1845 (preserve_values): Call it.
1847 * value.h (value_of_internalvar): Add GDBARCH parameter.
1848 (internalvar_make_value): Likewise.
1849 * value.c (value_of_internalvar): Add GDBARCH parameter. Pass it to
1850 make_value callback. Use it to generate per-architecture result value
1851 types for internal variables with no pre-defined type. Update for data
1853 (show_convenience): Pass architecture to value_of_internalvar.
1854 * eval.c (evaluate_subexp_standard): Likewise.
1855 * infrun.c (siginfo_make_value): Add GDBARCH parameter. Use it
1856 instead of current frame architecture. Return per-architecture type.
1858 * value.h (set_internalvar_string): Add prototype.
1859 * value.c (set_internalvar_string): New function.
1860 * tracepoint.c (set_traceframe_context): Use it.
1862 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
1864 * jv-lang.h (java_int_type, java_byte_type, java_short_type,
1865 java_long_type, java_boolean_type, java_char_type, java_float_type,
1866 java_double_type, java_void_type): Remove.
1867 (struct builtin_java_type): New data type.
1868 (builtin_java_type): Add prototype.
1869 (java_primitive_type): Add GDBARCH argument.
1870 (java_primitive_type_from_name): Likewise.
1871 (type_from_class): Likewise.
1873 * jv-lang.c (java_int_type, java_byte_type, java_short_type,
1874 java_long_type, java_boolean_type, java_char_type, java_float_type,
1875 java_double_type, java_void_type): Remove.
1877 (build_java_types, builtin_java_type): New functions.
1878 (java_type_data): New static variable.
1879 (_initialize_java_language): Initialize it. No longer initialize
1881 (java_language_arch_info): Use per-architecture types.
1883 (java_primitive_type): Add GDBARCH argument. Return per-architecture
1884 type instead of refering to global variable.
1885 (java_primitive_type_from_name): Add GDBARCH argument.
1886 (java_primitive_type_name): New function.
1887 (java_demangled_signature_length): Use it instead of
1888 java_primitive_type_from_name.
1889 (java_demangled_signature_copy): Likewise.
1891 (type_from_class): Add GDBARCH argument. Pass to java_link_class_type,
1892 java_primitive_type, and recursive type_from_class call.
1893 (java_link_class_type): Add GDBARCH argument. Pass to type_from_class
1894 calls. Use per-architecture types instead of global types.
1896 * jv-exp.y (parse_java_type): New define.
1897 Use per-architecture types instead of global types througout.
1899 * jv-valprint.c (java_value_print): Pass architecture to
1900 type_from_class and java_primitive_type_from_name. Use per-
1901 architecture types instead of global types.
1903 2009-07-01 Doug Evans <dje@google.com>
1905 * NEWS: Mention biarch amd64-linux gdbserver and hardware watchpoint
1906 support for i386-linux, amd64-linux, and i386-win32 builds of
1909 2009-07-01 Nick Roberts <nickrob@snap.net.nz>
1911 * Makefile.in (HFILES_NO_SRCDIR): Remove entries for deleted files.
1913 2009-06-30 Jan Kratochvil <jan.kratochvil@redhat.com>
1915 * Makefile.in (TARGET_FLAGS_TO_PASS): Include also FORCE_PARALLEL.
1916 (check//%): Construct FORCE_PARALLEL for the sub-make. Extend the
1919 2009-06-30 Paul Pluzhnikov <ppluzhnikov@google.com>
1922 * dwarf2-frame.c (dwarf2_frame_state): Move cfa_offset, cfa_reg,
1923 cfa_how and cfa_exp into regs and adjust users.
1925 2009-06-30 Daniel Jacobowitz <dan@codesourcery.com>
1927 * dwarf2read.c (inherit_abstract_dies): Work around GCC PR 40573.
1929 2009-06-30 Vladimir Prus <vladimir@codesourcery.com>
1931 * mi/mi-cmd-stack.c (parse_print_values): New.
1932 (mi_cmd_stack_list_locals, mi_cmd_stack_list_args): Use the above.
1934 2009-06-30 Vladimir Prus <vladimir@codesourcery.com>
1936 * varobj.c (varobj_get_type): Use type_to_string.
1938 2009-06-29 Pedro Alves <pedro@codesourcery.com>
1940 * infrun.c (handle_inferior_event): Context switch to the new
1941 thread when resuming for a new_thread_event.
1943 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
1945 * ada-lang.h (ada_convert_actual): Add GDBARCH argument.
1946 * ada-lang.c (convert_actual): Remove stale prototype.
1947 (ensure_lval, make_array_descriptor, ada_convert_actual):
1948 Add GDBARCH argument and pass through to subroutine calls.
1949 (ensure_lval): Use GDBARCH instead of current_gdbarch.
1950 * infcall.c (value_arg_coerce): Update ada_convert_actual call.
1952 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
1954 * ada-lang.c (resolve): Use per-architecture void type instead
1955 of platform-independent one.
1956 (ada_evaluate_subexp) [STRUCTOP_STRUCT]: Likewise.
1957 (ada_resolve_function): Reimplement fallback logic to avoid
1958 explicit reference to builtin_type_void.
1960 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
1962 * ada-valprint.c (ada_print_scalar): Accept NULL type argument
1963 to indicate scalar should be printed as default integer.
1964 (print_optional_low_bound): Pass NULL to ada_print_scalar to
1965 indicate default integer output.
1966 * ada-typeprint.c (print_range, print_range_bound): Likewise.
1967 (print_choices): Likewise. Thus, accept NULL as val_type.
1968 * ada-lang.c (ada_variant_discrim_type): Return NULL when failed
1969 to look up controlling discriminant name.
1971 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
1973 * ada-lang.c (to_fixed_range_type): Add ORIG_TYPE argument.
1974 Fall back to orig_type as index type if symbol lookup fails.
1975 Allocate result types from ORIG_TYPE's objfile.
1976 (ada_array_bound_from_type, to_fixed_array_type,
1977 ada_evaluate_subexp): Pass original index type to
1978 to_fixed_range_type. Do not pass objfile.
1980 * ada-typeprint.c (print_range_type_named): Add ORIG_TYPE argument.
1981 Fall back to orig_type as index type if symbol lookup fails.
1982 (print_array_type, ada_print_type): Pass original index type
1983 to print_range_type_named.
1985 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
1987 * ada-lang.c (ada_index_type): Update comment.
1989 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
1991 * ada-lang.c (ada_index_type): Make static. Add NAME argument.
1992 Throw error on invalid input arguments. Return NULL if unable
1993 to determine index type.
1995 (ada_array_bound_from_type): Remove TYPEP argument.
1996 (ada_array_bound): Make static. Return LONGEST instead of value.
1997 Update for ada_array_bound_from_type change.
1998 (ada_array_length): Return LONGEST instead of value.
1999 Update for ada_array_bound_from_type change.
2000 (make_array_descriptor): Update for ada_array_bound change.
2002 (ada_evaluate_subexp) [OP_ATR_RANGE, OP_ATR_FIRST, OP_ATR_LAST,
2003 OP_ATR_LENGTH]: Update for ada_array_bound_from_type,
2004 ada_array_bound, ada_array_length, ada_index_type changes.
2005 Always use ada_index_type to compute result type; fall back
2006 to architecture-specific integer type if ada_index_type fails.
2008 * ada-lang.h (ada_index_type): Remove prototype.
2009 (ada_array_bound): Likewise.
2011 2009-06-29 Pedro Alves <pedro@codesourcery.com>
2013 * dbxread.c (read_dbx_symtab): Clear has_line_numbers when ending
2016 2009-06-29 Tom Tromey <tromey@redhat.com>
2018 * README: Mention parallel check.
2020 2009-06-29 Sami Wagiaalla <swagiaal@redhat.com>
2022 * dwarf2read.c (read_import_statement): Properly set import location
2024 * cp-support.h (cp_add_using, cp_add_using_directive): Now take char*
2025 inner, char* outer arguments. Updated callers.
2027 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
2029 * value.h (value_subscript, value_subscripted_rvalue,
2030 value_bitstring_subscript, value_ptradd): Use LONGEST instead
2031 of value as type of the index argument.
2032 (value_ptrsub): Remove.
2033 * valarith.c (value_subscript, value_subscripted_rvalue,
2034 value_bitstring_subscript, value_ptradd): Use LONGEST instead
2035 of value as type of the index argument.
2036 (value_ptrsub): Remove.
2038 * wrapper.h (gdb_value_subscript): Use LONGEST instead of
2039 value as type of the index argument.
2040 * wrapper.c (gdb_value_subscript): Likewise.
2042 Update calls to gdb_value_subscript, value_subscript,
2043 value_subscripted_rvalue, value_bitstring_subscript and
2044 value_ptradd to use LONGEST instead of value as index
2045 argument type. Use value_ptradd instead of value_ptrsub.
2046 * ada-lang.c (ada_value_subscript, ada_value_ptr_subscript,
2047 ada_tag_name_2): Update.
2048 * ada-tasks.c (read_atcb): Update.
2049 * eval.c (evaluate_subexp_standard): Update.
2050 * valarith.c (value_subscript): Update.
2051 * gnu-v2-abi.c (gnuv2_virtual_fn_field): Update.
2052 * gnu-v3-abi.c (gnuv3_get_virtual_fn, gnuv3_baseclass_offset,
2053 gnuv3_method_ptr_to_value): Update.
2054 * jv-lang.c (evaluate_subexp_java): Update.
2055 * m2-lang.c (evaluate_subexp_modula2): Update.
2056 * python/python-value.c (valpy_getitem, valpy_binop): Update.
2057 * wrapper.c (gdb_value_subscript): Update.
2058 * varobj.c (c_describe_child): Update.
2060 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
2062 * gdbtypes.h (make_function_type): Remove OBJFILE parameter.
2063 * gdbtypes.c (make_function_type): Remove OBJFILE parameter.
2064 (lookup_function_type): Update call.
2065 * stabsread.c (read_type): Likewise.
2066 * dwarf2read.c (read_subroutine_type): Use lookup_function_type
2067 instead of make_function_type.
2068 * jv-lang.c (type_from_class): Likewise. Do not allocate types
2069 on the fake "dynamics" obstack.
2071 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
2073 * gdbtypes.h (struct builtin_type): Remove builtin_core_addr,
2074 nodebug_text_symbol, nodebug_data_symbol, nodebug_unknown_symbol,
2075 and nodebug_tls_symbol members.
2076 (struct objfile_type): New data structure.
2077 (objfile_type): Add prototype.
2078 * gdbtypes.c (gdbtypes_post_init): Remove initialization code
2079 for types no longer in struct builtin_type.
2080 (objfile_type_data): New static variable.
2081 (_initialize_gdbtypes): Initialize it.
2082 (objfile_type): New function.
2084 * gdbtypes.h (builtin_type_error): Remove.
2085 * gdbtypes.c (build_complex): Do not use builtin_type_error.
2086 * symtab.c (builtin_type_error): Remove.
2087 (_initialize_symtab): Remove initialization.
2089 * stabsread.c (dbx_lookup_type, define_symbol, error_type,
2090 rs6000_builtin_type, read_range_type): Use per-objfile types
2091 instead of global or per-architecture builtin types.
2092 * coffread.c (decode_type): Likewise.
2093 * dwarf2read.c (read_array_type, read_tag_string_type,
2094 new_symbol, die_type): Likewise.
2095 * mdebugread.c (parse_symbol, basic_type, upgrade_type,
2096 parse_procedure, psymtab_to_symtab_1): Likewise.
2097 * xcoffread.c (process_xcoff_symbol): Likewise.
2098 * parse.c (write_exp_msymbol): Likewise.
2100 * stabsread.c (rs6000_builtin_type_data): New static variable.
2101 (_initialize_stabsread): Initialize it.
2102 (rs6000_builtin_type): Add OBJFILE argument. Allocate builtin
2103 types per-objfile instead of globally.
2105 * stabsread.c (dbx_lookup_type): Add OBJFILE argument. Use it
2106 instead of current_objfile; pass it to rs6000_builtin_type.
2107 (dbx_alloc_type, read_type, read_range_type): Update calls.
2108 (cleanup_undefined_types_noname): Add OBJFILE argument and
2109 pass it to dbx_lookup_type.
2110 (cleanup_undefined_types): Add OBJFILE argument and pass it
2111 to cleanup_undefined_types_noname.
2112 * stabsread.h (cleanup_undefined_types): Add OBJFILE argument.
2113 * buildsym.c (end_symtab): Update call.
2115 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
2117 * darwin-nat-info.c (darwin_debug_regions_recurse): Use
2118 target_gdbarch instead of current_gdbarch.
2120 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
2122 * Makefile.in (ALL_64_TARGET_OBS): Add amd64-windows-tdep.o.
2123 (ALL_TARGET_OBS): Add moxie-tdep.o, i386-darwin-tdep.o, and
2126 * configure.tgt: Add comment.
2128 2009-06-28 Paul Pluzhnikov <ppluzhnikov@google.com>
2130 * mi/mi-cmds.c (mi_cmds): Remove unimplemented entries.
2132 2009-06-27 Daniel Jacobowitz <dan@codesourcery.com>
2133 Jan Kratochvil <jan.kratochvil@redhat.com>
2135 * NEWS: Document inlined function support.
2136 * Makefile.in (SFILES): Add inline-frame.c.
2137 (COMMON_OBS): Add inline-frame.o.
2138 * block.c (contained_in): Rewrite to use lexical nesting.
2139 (block_linkage_function): Skip inlined function blocks.
2140 (block_inlined_p): New.
2141 * block.h (struct block): Update comment.
2142 (block_inlined_p): New prototype.
2143 * blockframe.c (get_frame_block): Handle inlined functions.
2144 (get_frame_function): Do not use block_linkage_function.
2145 (block_innermost_frame): Use get_frame_block and contained_in.
2146 * breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache.
2147 Skip over inlined functions. Simplify epilogue check.
2148 (bpstat_check_breakpoint_conditions): Use get_stack_frame_id.
2150 (set_momentary_breakpoint): Only accept non-inlined frames.
2151 (watch_command_1): Use frame_unwind_caller_pc and
2152 frame_unwind_caller_id instead of get_prev_frame.
2153 (until_break_command): Likewise. Use get_stack_frame_id.
2154 * buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions.
2155 * dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function.
2156 * dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine.
2157 (read_func_scope, new_symbol): Likewise. Handle arguments specially
2158 for inlined functions without call site information.
2159 (inherit_abstract_dies): Allow tag mismatch for inlined subroutines.
2160 (die_specification): Treat DW_AT_abstract_origin as a specification.
2161 (read_type_die): Handle DW_TAG_inlined_subroutine.
2162 * frame-unwind.c (frame_unwind_init): Add inline_frame_unwind.
2163 * frame.c (fprint_frame_id): Print inline depth.
2164 (fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME.
2165 (skip_inlined_frames, get_stack_frame_id): New.
2166 (frame_unwind_caller_id): Use skip_inlined_frames.
2167 (frame_id_inlined_p): New.
2168 (frame_id_eq): Make the logic match the comments. Add inline_depth
2170 (frame_id_inner): Handle inlined functions.
2171 (frame_unwind_pc): New function, copied from frame_unwind_caller_pc.
2172 (frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc.
2173 (get_prev_frame_1): Check for inline frames. Split out frame
2174 allocation to get_prev_frame_raw.
2175 (get_prev_frame_raw): New function.
2176 (get_prev_frame): Handle inline frames.
2177 (get_frame_pc): Use frame_unwind_pc.
2178 (get_frame_address_in_block): Skip inlined frames on both sides.
2179 (pc_notcurrent): Delete.
2180 (find_frame_sal): Rewrite to handle inline call sites. Use
2181 get_frame_address_in_block.
2182 (deprecated_update_frame_pc_hack): Make static.
2183 * frame.h: Update comments.
2184 (struct frame_id): Add inline_depth.
2185 (enum frame_type): Add INLINE_FRAME.
2186 (frame_id_inlined_p, get_stack_frame_id): New prototypes.
2187 * gdbthread.h (struct thread_info): Add step_stack_frame_id field.
2188 * infcmd.c (set_step_frame): New function.
2189 (step_once): Use set_step_frame. Handle inlined functions.
2190 (until_next_command): Use set_step_frame.
2191 (finish_backward), finish_forward): Use get_stack_frame_id.
2192 (finish_command): Support inlined functions.
2193 * inferior.h (set_step_info): New prototype.
2194 * infrun.c (RESUME_ALL): Use minus_one_ptid.
2195 (clear_proceed_status): Clear step_stack_frame_id.
2196 (init_wait_for_inferior): Call clear_inline_frame_state.
2197 (init_execution_control_state): Make static.
2198 (set_step_info): New function.
2199 (init_thread_stepping_state): Do not set the symtab or line here.
2200 (stepped_in_from): New function.
2201 (handle_inferior_event): Handle inlined functions. Use set_step_info.
2202 (insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id.
2203 (struct inferior_status): Add step_stack_frame_id.
2204 (save_inferior_status, restore_inferior_status): Save and restore
2205 step_stack_frame_id.
2206 * inline-frame.c, inline-frame.h: New files.
2207 * minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC.
2208 * regcache.c (regcache_write_pc): Call reinit_frame_cache.
2209 * s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME.
2210 * stack.c (frame_show_address): New.
2211 (print_frame_info, print_frame): Use it.
2212 (find_frame_funname): Use get_frame_function. Handle inlined blocks.
2213 (frame_info): Mark inlined functions.
2214 (backtrace_command_1): Use get_current_user_frame.
2215 (print_frame_local_vars, print_frame_label_vars): Update comments.
2216 (return_command): Refuse inlined functions.
2217 * symtab.c (lookup_symbol_aux_local): Stop at inlined function
2219 (find_function_start_sal): Avoid inlined functions.
2220 (completion_list_add_fields): New function.
2221 (default_make_symbol_completion_list): Use it. Use block_static_block
2222 and block_global_block. Check for inlined functions.
2223 (skip_prologue_using_sal): Avoid line number comparison across
2225 * symtab.h (struct symbol): Add is_inlined.
2226 (SYMBOL_INLINED): New.
2227 * target.c (target_resume): Call clear_inline_frame_state.
2228 * valops.c (value_of_variable): Check block_inlined_p.
2230 2009-06-27 Daniel Jacobowitz <dan@codesourcery.com>
2232 * frame.c (frame_unwind_id): Renamed to ...
2233 (frame_unwind_caller_id): ... this. All callers updated.
2234 (frame_pc_unwind): Renamed to ...
2235 (frame_unwind_caller_pc): ... this. All callers updated.
2236 * frame.h: Document frame_unwind_caller_WHAT functions.
2237 (frame_unwind_id): Renamed to ...
2238 (frame_unwind_caller_id): ... this.
2239 (frame_pc_unwind): Renamed to ...
2240 (frame_unwind_caller_pc): ... this.
2241 * hppa-tdep.c (hppa_find_unwind_entry_in_block): Correct comment.
2242 * stack.c (parse_frame_specification_1): Do not rely on
2245 2009-06-27 Michael Snyder <msnyder@vmware.com>
2247 * infrun.c (handle_inferior_event): Improve handling of
2248 reverse-stepping into and over shared library functions.
2250 2009-06-25 Karen Osmond <karen.osmond@gmail.com>
2252 * linespec.c (find_method): Add new not_found_ptr parameter to
2253 bring in line with symtab_from_filename, decode_variable.
2254 (decode_compound): Likewise. Also propagate not_found_ptr to
2256 (decode_line_1): Propagate not_found_ptr to decode_compound.
2257 (cplusplus_error): Now throws NOT_FOUND_ERROR.
2259 2009-06-25 Karen Osmond <karen.osmond@gmail.com>
2261 * MAINTAINERS (Write After Approval): Add self.
2263 2009-06-23 Ulrich Weigand <uweigand@de.ibm.com>
2265 * valops.c (value_one): Reimplement broken decimal-float case.
2267 2009-06-23 Ulrich Weigand <uweigand@de.ibm.com>
2269 * eval.c (evaluate_subexp_standard): Use expression architecture
2270 instead of current_gdbarch.
2272 * infrun.c (handle_inferior_event): Avoid unncessary reference
2273 to current_gdbarch and get_current_frame ().
2275 2009-06-23 Ulrich Weigand <uweigand@de.ibm.com>
2277 * breakpoint.h (set_longjmp_breakpoint): Add THREAD argument.
2278 (enum bptype): Add bp_longjmp_master.
2280 * breakpoint.c (create_longjmp_master_breakpoint): New function.
2281 (update_breakpoints_after_exec): Handle bp_longjmp_master
2282 breakpoints. Call create_longjmp_master_breakpoint.
2283 (print_it_typical, bpstat_stop_status, bpstat_what,
2284 print_one_breakpoint_location, allocate_bp_location, mention,
2285 delete_command, breakpoint_re_set_one): Handle bp_longjmp_master.
2286 (breakpoint_re_set): Call create_longjmp_master_breakpoint.
2287 (create_longjmp_breakpoint): Delete.
2288 (set_longjmp_breakpoint): Add THREAD argument. Reimplement
2289 to install momentary clones of bp_longjmp_master breakpoints.
2291 * infcmd.c (step_1): Pass thread to set_longjmp_breakpoint.
2293 2009-06-23 Cary Coutant <ccoutant@google.com>
2295 * dwarf2read.c (dwarf_decode_lines): Ignore rows where is_stmt is 0.
2296 Set basic_block to 0 after a special opcode.
2298 2009-06-23 Jan Kratochvil <jan.kratochvil@redhat.com>
2300 Fix a regression by the mmap patch from 2009-06-16.
2301 * symfile.c (reread_symbols): Move sym_finish and clear_objfile_data
2302 calls before deleting the OBJFILE obstack. Extend the comment.
2304 2009-06-23 Ulrich Weigand <uweigand@de.ibm.com>
2306 * jv-lang.h (JAVA_OBJECT_SIZE): Remove.
2307 (get_java_object_header_size): Add GDBARCH parameter.
2308 * jv-lang.c (get_java_object_header_size): Add GDBARCH parameter.
2309 Use it instead of current_gdbarch.
2310 (evaluate_subexp_java): Replace JAVA_OBJECT_SIZE with call to
2311 get_java_object_header_size.
2312 * jv-valprint.c (java_value_print): Likewise.
2314 2009-06-23 Sami Wagiaalla <swagiaal@redhat.com>
2316 * dwarf2read.c (process_die): Handle import statements
2317 (DW_TAG_imported_declaration, case DW_TAG_imported_module)
2318 (read_import_statement): New.
2319 (read_func_scope): Update using_directives to point to current context
2320 (read_lexical_block_scope): Ditto.
2321 * cp-support.h: Added prototype for cp_add_using.
2322 * cp-namespace.c: Removed local context_stack.
2323 (cp_initialize_namespace): Deleted.
2324 (cp_finalize_namespace): Deleted.
2325 (cp_add_using_directive): Use using_directives instead of using_list.
2326 (cp_add_using): No longer static.
2327 * buildsym.h: Created global using_direct variable.
2328 Created using_direct variable in context_stack.
2329 * buildsym.c (finish_block): Set using directives for the block under
2331 (start_symtab): Removed call to cp_initialize_namespace().
2332 (end_symtab): Removed call to cp_finalize_namespace().
2333 (push_context): Save and reset using_directives.
2334 * block.c (block_using): Return using directives for given
2335 block instead of static block.
2337 2009-06-23 Ulrich Weigand <uweigand@de.ibm.com>
2339 * target-descriptions.h (struct type): Do not declare.
2340 (struct tdesc_type): Declare.
2341 (tdesc_named_type): Change return type to struct tdesc_type *.
2342 (tdesc_record_type): Remove.
2343 (tdesc_create_vector): Add prototype.
2344 (tdesc_create_union): Likewise.
2345 (tdesc_add_field): Likewise.
2347 * target-descriptions.c (struct tdesc_reg): Replace gdb_type
2348 member by tdesc_type member.
2349 (struct tdesc_type_field, tdesc_type_field): Add type and vector def.
2350 (struct tdesc_type, tdesc_type_p): Likewise.
2351 (struct tdesc_arch_reg, tdesc_arch_reg): Likewise.
2352 (struct tdesc_feature): Change type of "types" to VEC(tdesc_type_p).
2353 (struct tdesc_arch_data): Replace registers member by arch_regs.
2355 (tdesc_predefined_types): Change to array of pre-defined
2356 struct tdesc_type structures. Add "code_ptr" and "data_ptr".
2357 (tdesc_named_type): Return struct tdesc_type * instead of GDB type.
2358 (tdesc_gdb_type): New function.
2360 (target_find_description): Update for data structure changes.
2361 (tdesc_data_cleanup): Likewise.
2362 (tdesc_numbered_register): Likewise.
2363 (tdesc_use_registers): Likewise.
2364 (tdesc_create_reg): Likewise.
2366 (tdesc_find_arch_register): New function.
2367 (tdesc_find_register): Use it.
2368 (tdesc_register_type): Use tdesc_gdb_type to generate GDB type from
2369 tdesc_type on demand; cache generated types in tdesc_arch_reg.
2371 (tdesc_free_type): New function.
2372 (tdesc_free_feature): Call it.
2374 (tdesc_create_vector): New function.
2375 (tdesc_create_union): Likewise.
2376 (tdesc_add_field): Likewise.
2377 (tdesc_record_type): Remove.
2379 (tdesc_type_id): Remove.
2380 (maint_print_c_tdesc_cmd): Update for data structure changes. Update
2381 generated code to create tdesc_type structures instead of GDB types.
2383 * xml-tdesc.c: Do not include "gdbtypes.h".
2384 (struct tdesc_parsing_data): Change type of current_union to
2385 struct tdesc_type *.
2386 (tdesc_start_reg): Do not special-case "code_ptr" or "data_ptr".
2387 (tdesc_start_union): Call tdesc_create_union.
2388 (tdesc_start_field): Call tdesc_add_field.
2389 (tdesc_start_vector): Call tdesc_create_vector.
2390 (tdesc_end_union): Remove.
2391 (feature_children): Remove reference to tdesc_end_union.
2393 * features/arm-with-iwmmxt.c: Regenerate.
2394 * features/mips-linux.c: Regenerate.
2395 * features/mips64-linux.c: Regenerate.
2396 * features/rs6000/powerpc-32.c: Regenerate.
2397 * features/rs6000/powerpc-32l.c: Regenerate.
2398 * features/rs6000/powerpc-403.c: Regenerate.
2399 * features/rs6000/powerpc-403gc.c: Regenerate.
2400 * features/rs6000/powerpc-505.c: Regenerate.
2401 * features/rs6000/powerpc-601.c: Regenerate.
2402 * features/rs6000/powerpc-602.c: Regenerate.
2403 * features/rs6000/powerpc-603.c: Regenerate.
2404 * features/rs6000/powerpc-604.c: Regenerate.
2405 * features/rs6000/powerpc-64.c: Regenerate.
2406 * features/rs6000/powerpc-64l.c: Regenerate.
2407 * features/rs6000/powerpc-7400.c: Regenerate.
2408 * features/rs6000/powerpc-750.c: Regenerate.
2409 * features/rs6000/powerpc-860.c: Regenerate.
2410 * features/rs6000/powerpc-altivec32.c: Regenerate.
2411 * features/rs6000/powerpc-altivec32l.c: Regenerate.
2412 * features/rs6000/powerpc-altivec64.c: Regenerate.
2413 * features/rs6000/powerpc-altivec64l.c: Regenerate.
2414 * features/rs6000/powerpc-e500.c: Regenerate.
2415 * features/rs6000/powerpc-e500l.c: Regenerate.
2416 * features/rs6000/powerpc-isa205-32l.c: Regenerate.
2417 * features/rs6000/powerpc-isa205-64l.c: Regenerate.
2418 * features/rs6000/powerpc-isa205-altivec32l.c: Regenerate.
2419 * features/rs6000/powerpc-isa205-altivec64l.c: Regenerate.
2420 * features/rs6000/powerpc-isa205-vsx32l.c: Regenerate.
2421 * features/rs6000/powerpc-isa205-vsx64l.c: Regenerate.
2422 * features/rs6000/powerpc-vsx32.c: Regenerate.
2423 * features/rs6000/powerpc-vsx32l.c: Regenerate.
2424 * features/rs6000/powerpc-vsx64.c: Regenerate.
2425 * features/rs6000/powerpc-vsx64l.c: Regenerate.
2426 * features/rs6000/rs6000.c: Regenerate.
2428 2009-06-23 Joel Brobecker <brobecker@adacore.com>
2430 * ada-lang.c (decode_packed_array): If the value is a pointer to
2431 an array, then use value_ind to dereference it, not ada_value_ind.
2432 (ada_template_to_fixed_record_type_1): Handle the case where a
2433 dynamic field is an aligner type.
2434 (to_fixed_array_type): Add handling for packed array types.
2435 (ada_get_base_type): Do not follow the XVS type if the type is
2437 (ada_evaluate_subexp): Split a few statements up for clarity
2439 <OP_FUNCALL>: Add handling of the case of a packed array that
2440 has already been fixed.
2442 2009-06-23 Joel Brobecker <brobecker@adacore.com>
2444 * ada-lang.c (evaluate_subexp): Delete. Use the version from eval.c.
2445 (evaluate_subexp_type): Reimplement using evaluate_subexp.
2446 * value.h (evaluate_subexp): Add declaration.
2447 * eval.c (evaluate_subexp): Make non-static.
2448 * objc-lang.c (print_object_command): Use evaluate_subexp.
2450 2009-06-23 Paul Pluzhnikov <ppluzhnikov@google.com>
2452 Revert 2009-05-14 breakpoint commit (no longer needed).
2453 * breakpoint.h (breakpoint_re_set_objfile): Remove
2454 * breakpoint.c (breakpoint_re_set_objfile): Likewise
2455 (create_overlay_event_breakpoint): Remove objfile parameter,
2456 iterate over all objfiles.
2457 * objfiles.c (objfile_relocate): Update.
2458 * symfile.c (new_symfile_objfile): Likewise.
2460 2009-06-23 Tom Tromey <tromey@redhat.com>
2463 * c-lang.c (classify_type): Iterate over typedefs.
2464 * c-valprint.c (textual_element_type): Iterate over typedefs.
2466 2009-06-22 Tristan Gingold <gingold@adacore.com>
2468 * darwin-nat.c (darwin_xfer_partial): Use host_address_to_string
2471 2009-06-22 Jan Kratochvil <jan.kratochvil@redhat.com>
2474 * buildsym.c (block_compar): New function.
2475 (end_symtab): Replace the bubble sort by a qsort based code.
2477 2009-06-22 Sami Wagiaalla <swagiaal@redhat.com>
2479 * MAINTAINERS (Write After Approval): Add self.
2481 2009-06-22 Ulrich Weigand <uweigand@de.ibm.com>
2483 * spu-tdep.c (spu_get_longjmp_target): New function.
2484 (spu_gdbarch_init): Install it.
2486 2009-06-22 H.J. Lu <hongjiu.lu@intel.com>
2489 * remote.c (getpkt_or_notif_sane_1): Initialize val to -1.
2491 2009-06-21 Michael Snyder <msnyder@vmware.com>
2493 * inferior.h: Update ancient comment.
2495 2009-06-20 Aleksandar Ristovski <aristovski@qnx.com>
2496 Pedro Alves <pedro@codesourcery.com>
2498 * solib-svr4.c (IGNORE_FIRST_LINK_MAP_ENTRY): Avoid dereferencing
2500 (scan_dyntag): Skip if input bfd isn't elf flavoured.
2501 (locate_base): Call elf_locate_base even without an exec_bfd.
2503 2009-06-19 Samuel Bronson <naesten@gmail.com>
2506 * cli/cli-decode.c (apropos_cmd): Skip traversing abbreviations
2507 for prefix commands to avoid duplicates in the output.
2509 2009-06-19 Samuel Bronson <naesten@gmail.com>
2512 * cli/cli-decode.c (apropos_cmd): Fix avoidance of double
2515 2009-06-19 Jerome Guitton <guitton@adacore.com>
2517 * breakpoint.c (expand_line_sal_maybe): When explicit_line,
2518 skip prologue on each sals.
2519 (skip_prologue_sal): Return explicit_line and explicit_pc
2522 2009-06-19 Tristan Gingold <gingold@adacore.com>
2524 * darwin-nat.c (_initialize_darwin_inferior): Remove commented-out
2527 2009-06-19 Tristan Gingold <gingold@adacore.com>
2528 * machoread.c (macho_symtab_read): Adjust for bfd changes.
2529 * darwin-nat.h (struct darwin_exception_msg): New type to describe
2531 (struct private_thread_info): New type to describe the state of the
2533 (DEF_VEC_I thread_t): Removed, replaced by ...
2534 (DEF_VEC_O darwin_thread_t): ... this new type.
2535 (struct darwin_inferior): Renamed to ...
2536 (struct private_inferior): ... this type. Fields added.
2537 (darwin_not_port): Moved into the private inferior structure.
2538 * darwin-nat.c: Add includes, improve comments.
2539 Rewrite to handle multiple threads and processes.
2540 (darwin_resume_to): New function and protype.
2541 (darwin_resume, darwin_wait_to, darwin_wait): Ditto.
2542 (darwin_kill_inferior): Add ops argument.
2543 (darwin_pid_to_str): New function.
2544 (darwin_thread_alive): Ditto.
2545 (darwin_inf, darwin_not_port): Removed.
2546 (darwin_inf_fake_stop): New variable.
2547 (msgin, msgout, msg_state, exc_msg): Removed.
2548 (mach_check_error): Use warning instead of error.
2549 (darwin_ptrace): Adjust debug level.
2550 (cmp_thread_t): Fix names (typo).
2551 (darwin_check_new_threads): Argument is now an inferior,
2552 adjust for new structures, add no change check, ignore dead ports,
2553 handle first thread case.
2554 (find_inferior_task_it): New function.
2555 (find_inferior_notify_it): Ditto.
2556 (darwin_find_inferior_by_task): Ditto.
2557 (darwin_find_inferior_by_notify): Ditto.
2558 (darwin_find_thread): Ditto.
2559 (darwin_suspend_inferior): Ditto.
2560 (darwin_resume_inferior): Ditto.
2561 (catch_exception_raise_state): Removed.
2562 (catch_exception_raise_state_identity): Removed.
2563 (darwin_suspend_inferior_it): New function.
2564 (darwin_resume_inferior_it): Ditto.
2565 (darwin_dump_message): New function, extracted from darwin_wait.
2566 (darwin_decode_exception_message): New function.
2567 (darwin_encode_reply): New function.
2568 (catch_exception_raise): Removed.
2569 (darwin_send_reply): New function, extracted from darwin_resume.
2570 (darwin_resume_thread): New function, extracted from darwin_resume.
2571 (struct resume_inferior_threads_param): New type.
2572 (darwin_resume_inferior_threads_it): New function.
2573 (darwin_resume_inferior_threads): New function.
2574 (darwin_suspend_inferior_threads): New function.
2575 (darwin_resume): Mostly rewritten to handle multiple threads and
2577 (darwin_decode_message): New function extracted from darwin_wait.
2578 (cancel_breakpoint): New function.
2579 (darwin_wait): Mostly rewritten. Handle multiple threads.
2580 (darwin_mourn_inferior): Adjust for per process structures.
2581 (darwin_reply_to_all_pending_messages): New function.
2582 (darwin_stop_inferior): Adjust for per inferior structures.
2583 (darwin_attach_pid): Ditto.
2584 (darwin_init_thread_list): Ditto.
2585 (darwin_attach): Ditto.
2586 (darwin_detach): Ditto.
2587 (darwin_files_info): Now empty.
2588 (darwin_pid_to_str): Adjust returns string to match one expected by
2590 (darwin_read_write_inferior): Rename err variable to match other uses.
2591 Adjust debug message. Handle submaps.
2592 (darwin_xfer_memory): Adjust for per inferior structures.
2593 (set_enable_mach_exceptions): Ditto.
2594 (darwin_pid_to_exec_file): New function.
2595 (darwin_get_ada_task_ptid): Ditto.
2596 (darwin_supports_multi_process): Ditto.
2597 (_initialize_darwin_inferior): Remove useless assertion, adjust for
2598 per inferior structures. Add new target operations.
2600 2009-06-18 Hui Zhu <teawater@gmail.com>
2601 Michael Snyder <msnyder@vmware.com>
2603 * infrun.c (handle_inferior_event): Improve reverse stepping
2604 through function epilogue.
2606 * infrun.c (handle_inferior_event): Reverse-next through
2609 2009-06-18 Paul Pluzhnikov <ppluzhnikov@google.com>
2611 * dwarf2-frame.c (struct comp_unit): Use bfd_size_type for
2614 2009-06-17 Tom Tromey <tromey@redhat.com>
2616 * dwarf2read.c (zlib_decompress_section): Use a cleanup.
2618 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
2620 * gdbarch.sh (pointer_to_address): Change to type 'm'.
2621 (address_to_pointer): Likewise.
2622 * gdbarch.c, gdbarch.h: Regenerate.
2624 * inferior.h (unsigned_pointer_to_address): Add GDBARCH argument.
2625 (signed_pointer_to_address): Likewise.
2626 (unsigned_address_to_pointer, address_to_signed_pointer): Likewise.
2627 * findvar.c (unsigned_pointer_to_address): Likewise.
2628 (signed_pointer_to_address): Likewise.
2629 (unsigned_address_to_pointer, address_to_signed_pointer): Likewise.
2631 * avr-tdep.c (avr_address_to_pointer): Likewise.
2632 (avr_pointer_to_address): Likewise.
2633 * iq2000-tdep.c (iq2000_pointer_to_address): Likewise.
2634 (iq2000_address_to_pointer): Likewise.
2635 * m32c-tdep.c (m32c_m16c_address_to_pointer): Likewise.
2636 (m32c_m16c_pointer_to_address): Likewise.
2637 * spu-tdep.c (spu_pointer_to_address): Likewise.
2638 * xstormy16-tdep.c (xstormy16_pointer_to_address): Likewise.
2639 (xstormy16_address_to_pointer): Likewise.
2641 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
2643 * printcmd.c (print_scalar_formatted): Always truncate
2644 unsigned data types.
2646 * cli-dump.c (struct callback_data): Change type of load_offset
2648 (restore_binary_file): Update type casts.
2649 (restore_command): Parse load_offset as address, not long.
2651 * utils.c (string_to_core_addr): Do not sign-extend value.
2652 * varobj.c (find_frame_addr_in_frame_chain): Truncate frame_base
2653 before comparing against requested frame address.
2655 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
2657 * gdbarch.sh (gcore_bfd_target): New gdbarch callback.
2658 * gdbarch.h, gdbarch.c: Regenerate.
2660 * gcore.c (default_gcore_target): Make return value const.
2661 Call gdbarch_gcore_bfd_target if present.
2662 (default_gcore_arch, default_gcore_mach): Use target_gdbarch.
2664 * corelow.c (core_read_description): Call gdbarch_core_read_description
2665 on core_gdbarch instead of current_gdbarch.
2667 * ppc-linux-tdep.c (ppc_linux_init_abi): Install gcore_bfd_target.
2669 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
2671 * gdbtypes.c (create_string_type): Receive character type as argument.
2672 * gdbtypes.h (create_string_type): Add character type argument.
2673 * dwarf2read.c (read_tag_string_type): Pass character type to
2676 * value.h (value_string): Add character type argument.
2677 * valops.c (value_string): Add character type argument. Pass it to
2678 create_string_type. Do not allocate space in inferior.
2679 * valarith.c (value_concat): Pass character type to value_string.
2681 * value.h (value_typed_string): Rename to ...
2682 (value_cstring): ... this.
2683 * valops.c (value_typed_string): Rename to ...
2684 (value_cstring): ... this.
2685 * c-lang.c (evaluate_subexp_c): Update.
2687 * python/python-value.c (builtin_type_pychar): New define.
2688 (convert_value_from_python): Call value_cstring instead
2689 of value_from_string.
2690 * value.c (value_from_string): Remove.
2691 * value.h (value_from_string): Remove.
2693 * eval.c (evaluate_subexp_standard): Pass character type to
2694 value_string. Pass expression architecture to value_nsstring
2695 and lookup_child_selector.
2696 * objc-lang.h (lookup_objc_class): Add GDBARCH parameter.
2697 (lookup_child_selector): Likewise.
2698 (value_nsstring): Likewise.
2699 * objc-lang.c (lookup_objc_class): Add GDBARCH parameter.
2700 Pass character type to value_string..
2701 (lookup_child_selector): Likewise.
2702 (value_nsstring): Add GDBARCH parameter, use it instead of
2703 objfile architecture. Pass architecture to lookup_objc_class
2704 and lookup_child_selector. Pass character type to value_string.
2705 (end_msglist): Pass architecture to lookup_objc_class.
2706 * objc-exp.y: Pass architecture to lookup_objc_class.
2708 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
2710 * gdbtypes.h (struct language_defn): Add forward declaration.
2711 (lookup_typename): Add LANGUAGE and GDBARCH parameters.
2712 (lookup_unsigned_typename): Likewise.
2713 (lookup_signed_typename): Likewise.
2714 * gdbtypes.c (lookup_typename): Add LANGUAGE and GDBARCH parameters.
2715 Use them instead of current_language and current_gdbarch.
2716 (lookup_unsigned_typename): Add LANGUAGE and GDBARCH parameters.
2717 Pass them to lookup_typename.
2718 (lookup_signed_typename): Likewise.
2720 * c-exp.y: Pass parse_language and parse_gdbarch to
2721 lookup_unsigned_typename and lookup_signed_typename.
2722 * objc-exp.y: Likewise.
2723 * m2-exp.y: Pass parse_language and parse_gdbarch to lookup_typename.
2725 * c-lang.c (evaluate_subexp_c): Pass expression language and
2726 gdbarch to lookup_typename.
2727 * printcmd.c (printf_command): Pass current language and
2728 gdbarch to lookup_typename.
2729 * python/python-type.c (typy_lookup_typename): Likewise.
2730 Include "language.h".
2732 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
2734 * sparc64-nat.c (sparc64_gregset_supplies_p): Add GDBARCH parameter.
2735 Use it instead of current_gdbarch. Pass architecture to
2736 sparc32_gregset_supplies_p.
2737 (sparc64_fpregset_supplies_p): Add GDBARCH parameter. Use it instead
2738 of current_gdbarch. Pass architecture to sparc32_fpregset_supplies_p.
2739 * sparc64nbsd-nat.c (sparc64nbsd_gregset_supplies_p,
2740 sparc64nbsd_fpregset_supplies_p): Likewise.
2741 * sparc-nat.c (sparc_gregset_supplies_p, sparc_fpregset_supplies_p):
2742 Add GDBARCH parameter.
2743 (sparc32_gregset_supplies_p, sparc32_fpregset_supplies_p): Likewise.
2744 (sparc_fetch_inferior_registers): Pass regcache architecture to
2745 sparc_gregset_supplies_p and sparc_fpregset_supplies_p.
2746 (sparc_store_inferior_registers): Likewise.
2747 * sparc-nat.h (sparc_gregset_supplies_p, sparc_fpregset_supplies_p:
2748 Add GDBARCH parameter.
2749 (sparc32_gregset_supplies_p, sparc32_fpregset_supplies_p): Likewise.
2751 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
2753 * ada-tasks.c (read_known_tasks_array): Use target_gdbarch instead
2755 * aix-thread.c (pd_enable): Likewise.
2756 * amd64-linux-nat.c (ps_get_thread_area): Likewise.
2757 * bsd-uthread.c (bsd_uthread_activate): Likewise.
2758 * linux-nat.c (linux_nat_info_proc_cmd): Likewise.
2759 * linux-thread-db.c (enable_thread_event): Likewise.
2760 * monitor.c (monitor_write_memory, monitor_read_memory): Likewise.
2761 * nto-procfs.c (procfs_open): Likewise.
2762 * procfs.c (invalidate_cache, procfs_insert_watchpoint,
2763 info_proc_mappings, info_mappings_callback): Likewise.
2764 * record.c (record_open): Likewise.
2765 * rs6000-nat.c (ARCH64): Likewise.
2766 * solib-darwin.c (darwin_solib_create_inferior_hook): Likewise.
2767 (darwin_bfd_open): Likewise.
2768 * memattr.c (mem_info_command): Likewise.
2770 * windows-nat.c (win32_resume): Use current regcache architecture
2771 instead of current_gdbarch.
2773 * dbug-rom.c (dbug_regname): Remove check against number of
2774 registers in current_gdbarch.
2775 * solib-pa64.c (read_dynamic_info): Remove unused variable.
2777 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
2779 * dummy-frame.c (deprecated_pc_in_call_dummy): Add GDBARCH parameter,
2780 use it instead of current_gdbarch.
2781 * frame.h (deprecated_pc_in_call_dummy): Add GDBARCH parameter.
2782 * arm-tdep.c (arm_skip_prologue): Pass architecture to
2783 deprecated_pc_in_call_dummy.
2785 * symtab.c (skip_prologue_using_sal): Add GDBARCH parameter.
2786 Use it instead of current_gdbarch.
2787 * symtab.h (skip_prologue_using_sal): Add GDBARCH parameter.
2788 * breakpoint.c (expand_line_sal_maybe): Pass architecture to
2789 skip_prologue_using_sal.
2790 * arm-tdep.c (skip_prologue_using_sal): Likewise.
2791 * lm32-tdep.c (lm32_skip_prologue): Likewise.
2792 * m32-tdep.c (m32c_skip_prologue): Likewise.
2793 * mips-tdep.c (mips_skip_prologue): Likewise.
2794 * moxie-tdep.c (moxie_skip_prologue): Likewise.
2795 * mt-tdep.c (mt_frame_unwind_cache): Likewise.
2796 * rs6000-tdep.c (rs6000_skip_prologue): Likewise.
2797 * frv-tdep.c (frv_analyze_prologue): Add GDBARCH parameter, pass
2798 it to skip_prologue_using_sal. Update call sites ...
2799 (frv_skip_prologue, frv_frame_unwind_cache): ... here.
2801 * mn10300-tdep.c (struct mn10300_prologue): Add GDBARCH member.
2802 (check_for_saved): Use it instead of current_gdbarch.
2803 (mn10300_analyze_prologue): Set it.
2805 * value.c (using_struct_return): Add GDBARCH parameter. Use it
2806 instead of current_gdbarch.
2807 * value.h (using_struct_return): Add GDBARCH parameter.
2808 * eval.c (evaluate_subexp_standard): Pass architecture to
2809 using_struct_return.
2810 * infcall.c (call_function_by_hand): Likewise.
2811 * stack.c (return_command): Likewise.
2812 * sparc-tdep.c (sparc32_push_dummy_code): Likewise.
2814 * symtab.c (in_prologue): Add GDBARCH parameter. Use it instead of
2816 * symtab.h (in_prologue): Add GDBARCH parameter.
2817 * infrun.c (handle_inferior_event): Pass architecture to in_prologue.
2819 * eval.c (evaluate_subexp_standard): Use expression architecture
2820 instead of current_gdbarch.
2822 * c-lang.c (evaluate_subexp_c): Use expression architecture and
2823 language instead of current_gdbarch and current_language.
2825 * printcmd.c (do_one_display): Use expression architecture instead
2828 * infcmd.c (print_return_value): Use architecture of stop_regcache
2829 instead of current_gdbarch.
2830 (print_vector_info, print_float_info): Remove GDBARCH argument,
2831 use frame architecture instead.
2832 (vector_info, float_info): Update calls.
2834 * objc-lang.c (objc_skip_trampoline): Use frame architecture
2835 instead of current_gdbarch.
2837 * parse.c (write_dollar_variable): Use parse architecture instead
2840 * source.c (line_info): Use objfile architecture instead of
2843 * symtab.c (find_function_start_sal): Use gdbarch instead of
2845 (print_msymbol_info): Use objfile architecture instead of
2848 * valops.c (value_assign): Use frame architecture instead of
2851 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
2853 * buildsym.c (record_line): Remove call to gdbarch_addr_bits_remove.
2855 * coffread.c (coff_symtab_read): Call gdbarch_addr_bits_remove before
2856 calling record_line.
2857 (enter_linenos): Likewise.
2858 * dbxread.c (process_one_symbol): Likewise.
2859 * dwarf2read.c (dwarf_decode_lines): Likewise.
2860 * mdebugread.c (psymtab_to_symtab_1): Likewise.
2861 * xcoffread.c (enter_line_range): Likewise.
2863 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
2865 * ax-gdb.c (gen_bitfield_ref): Add EXP argument, use expression
2866 architecture instead of current_gdbarch.
2867 (gen_struct_ref): Add EXP argument, pass to get_bitfield_ref.
2868 (gen_expr): Pass expression to get_struct_ref.
2870 * symtab.h (struct symbol_ops): Add GDBARCH parameter to
2871 tracepoint_var_ref callback.
2872 * ax-gdb.c (gen_var_ref): Pass architecture to tracepoint_var_ref
2873 symbol operation callback.
2874 * dwarf2loc.c (dwarf2_tracepoint_var_ref): Add GDBARCH parameter.
2875 Use it instead of current_gdbarch.
2876 (locexpr_tracepoint_var_ref): Add GDBARCH parameter. Pass it to
2877 dwarf2_tracepoint_var_ref.
2878 (loclist_tracepoint_var_ref): Likewise.
2880 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
2882 * prologue-value.c (make_pv_area): Add ADDR_BIT argument.
2883 Use it instead of address bits of current_gdbarch.
2884 * prologue-value.c (make_pv_area): Add ADDR_BIT argument.
2885 * arm-tdep.c (thumb_analyze_prologue): Pass address bits to
2887 (arm_scan_prologue): Likewise.
2888 * m32c-tdep.c (m32c_analyze_prologue): Likewise.
2889 * mep-tdep.c (mep_analyze_prologue): Likewise.
2890 * mn10300-tdep.c (mn10300_analyze_prologue): Likewise.
2891 * s390-tdep.c (s390_analyze_prologue): Likewise.
2893 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
2895 * mi/mi-main.c (mi_cmd_data_list_register_names): Use selected
2896 frame architecture instead of current_gdbarch.
2897 (mi_cmd_data_list_changed_registers): Likewise.
2898 (mi_cmd_data_list_register_values): Likewise. Pass selected
2899 frame to get_register.
2900 (get_register): Add FRAME argument, use it as frame to retrieve
2901 registers from (instead of selected frame). Use frame architecture
2902 instead of current_gdbarch.
2903 (mi_cmd_data_write_register_values): Use current regcache
2904 architecture instead of current_gdbarch.
2906 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
2908 * tui/tui-regs.c (tui_show_register_group): Remove GDBARCH parameter;
2909 use frame architecture instead. Replace current_gdbarch uses.
2910 (tui_show_registers): Update call.
2911 (tui_get_register): Remove GDBARCH parameter; use frame architecture
2913 (tui_show_register_group): Update call.
2914 (tui_check_register_values): Likewise.
2915 (tui_register_format): Remove GDBARCH parameter; use frame
2916 architecture instead. Replace current_gdbarch uses.
2917 (tui_get_register): Update call.
2919 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
2921 * gdbarch.sh (construct_inferior_arguments): Remove.
2922 * gdbarch.c, gdbarch.h: Regenerate.
2923 * infcmd.c (get_inferior_args): Call construct_inferior_arguments
2924 directly instead of gdbarch_construct_inferior_arguments.
2925 (construct_inferior_arguments): Remove GDBARCH argument.
2926 * inferior.h (construct_inferior_arguments): Likewise.
2928 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
2930 * symfile.c (section_is_mapped): Use objfile architecture instead
2932 (TARGET_LONG_BYTES): Remove.
2933 (read_target_long_array): Add SIZE argument. Use it instead of
2935 (simple_read_overlay_table): Retrieve long size from objfile
2936 architecture; pass it to read_target_long_array.
2937 (simple_read_overlay_region_table): Likewise.
2938 (simple_overlay_update_1): Likewise.
2940 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
2942 * infrun.c (cleanup_displaced_step_closure): Remove.
2943 (displaced_step_clear_cleanup): Move to before displaced_step_prepare.
2944 (displaced_step_prepare): Use displaced_step_clear_cleanup instead
2945 of cleanup_displaced_step_closure.
2946 (handle_inferior_event, keep_going): Use thread architecture instead
2949 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
2951 * infrun.c (handle_inferior_event): Use current frame architecture
2952 or thread architecture instead of current_gdbarch. Pass to
2953 handle_step_into_function and handle_step_into_function_backward.
2954 (handle_step_into_function): Add GDBARCH parameter. Use it instead
2956 (handle_step_into_function_backward): Likewise.
2957 (insert_step_resume_breakpoint_at_frame): Use frame architecture
2958 instead of current_gdbarch.
2959 (insert_step_resume_breakpoint_at_caller): Likewise.
2961 2009-06-17 Pierre Muller <muller@ics.u-strasbg.fr>
2962 Pedro Alves <pedro@codesourcery.com>
2964 * infcmd.c (post_create_inferior): Call breakpoint_re_set after target
2965 is pushed for watchpoint promotion to hardware watchpoint.
2967 2009-06-16 Paul Pluzhnikov <ppluzhnikov@google.com>
2969 * dwarf2read.c (dwarf_info_section, dwarf_abbrev_section)
2970 (dwarf_line_section, dwarf_pubnames_section, dwarf_aranges_section)
2971 (dwarf_loc_section, dwarf_macinfo_section, dwarf_str_section)
2972 (dwarf_ranges_section, dwarf_frame_section)
2973 (dwarf_eh_frame_section): Removed.
2974 (dwarf2_resize_section): Likewise.
2975 (dwarf2_read_section): Now static, use bfd_mmap() if possible.
2976 (dwarf2_get_section_info): New function.
2977 (munmap_section_buffer): Likewise.
2978 (dwarf2_per_objfile_cleanup): Likewise.
2979 (section_is_p): Signature change.
2980 * dwarf2-frame.c (dwarf2_build_frame_info): Use
2981 dwarf2_get_section_info instead of dwarf2_read_section.
2983 2009-06-16 Paul Pluzhnikov <ppluzhnikov@google.com>
2985 * solib.c (symbol_add_stub): New FLAGS parameter.
2986 (solib_read_symbols): FROM_TTY -> FLAGS, call symbol_add_stub
2988 (solib_add): Defer breakpoint_re_set until after all solibs.
2989 * bsd-uthread.c (bsd_uthread_solib_loaded): Adjust.
2990 * rs6000-nat.c (objfile_symbol_add): Adjust.
2991 * symfile.c (syms_from_objfile): Merge parameters into ADD_FLAGS.
2992 (new_symfile_objfile): Likewise.
2993 (symbol_file_add_with_addrs_or_offsets): Likewise.
2994 (symbol_file_add_from_bfd): Likewise.
2995 (symbol_file_add): Likewise.
2996 * symfile.h (enum symfile_add_flags): New. Adjust prototypes.
2997 * symfile-mem.c (symbol_file_add_from_memory): Adjust.
2998 * windows-nat.c (safe_symbol_file_add_stub): Adjust.
2999 * machoread.c (macho_oso_symfile, macho_symfile_read): Adjust.
3001 2009-06-16 Keith Seitz <keiths@redhat.com>
3003 * linespec.c (collect_methods): Delete.
3004 (add_matching_methods): Reove destructor special case.
3005 (find_method): Call find_methods directly instead of
3007 * valops.c (value_struct_elt): Remove destructor
3009 (check_field): Likewise.
3010 (value_struct_elt_for_reference): Likewise.
3011 (destructor_name_p): Remove misleading comment about dtors
3012 being "special cases".
3013 * gdbtypes.h (get_destructor_fn_field): Remove. No longer needed.
3014 * gdbtypes.c (get_destructor_fn_field): Likewise.
3016 2009-06-16 Pedro Alves <pedro@codesourcery.com>
3018 * mi/mi-main.c (mi_cmd_data_read_memory): Dispatch
3019 TARGET_OJECT_MEMORY reads to the topmost target, not to the
3020 flattened current_target.
3022 2009-06-16 Tristan Gingold <gingold@adacore.com>
3024 * avr-tdep.c (struct gdbarch_tdep): Replace the unused field with
3026 (avr_register_name): Add const to register_names.
3027 (avr_scan_arg_moves): Move inside avr_scan_prologue.
3028 (avr_scan_prologue): Add pc_end argument.
3029 Only read prologue bytes that can be read.
3030 Limit the scan to the known prologue length.
3031 Makes pattern variables static and const.
3033 (avr_skip_prologue): Pass func_end argument to avr_scan_prologue.
3035 (avr_breakpoint_from_pc): Constify avr_break_insn.
3036 (avr_extract_return_value): Fix function comment.
3037 (avr_frame_unwind_cache): Fix GNU style violations.
3038 Pass current_pc argument to avr_scan_prologue to stop prologue
3039 analysis to the current pc. This fixes the bug with the 'next'
3041 Correctly set the SP register of the previous frame (use call_length).
3042 (avr_frame_prev_register): Fix indentation.
3043 Correctly read PC from the stack on avr6 architectures.
3044 (avr_push_dummy_call): Fix indentation.
3045 (avr_gdbarch_init): Set call_length according to the architecture.
3047 2009-06-15 Phil Muldoon <pmuldoon@redhat.com>
3049 * infcall.c (show_unwind_on_terminating_exception_p): New
3051 (call_function_by_hand): Create breakpoint and clean-up call for
3052 std::terminate.breakpoint. Add unwind_on_terminating_exception_p
3053 gate. Pop frame on breakpoint hit.
3054 (_initialize_infcall): Add add_setshow_boolean_cmd for
3055 unwind-on-terminating-exception.
3057 2009-06-12 Kevin Buettner <kevinb@redhat.com>
3059 * dwarf2read.c (dwarf2_psymtab_to_symtab): Propagate
3060 `has_section_at_zero' flag from stripped objfile to separate,
3061 debug info only, objfile.
3063 2009-06-12 Pedro Alves <pedro@codesourcery.com>
3065 * exec.h (section_table_xfer_memory_partial): Improve description,
3066 mention SECTION_NAME.
3067 * exec.c (section_table_xfer_memory_partial): Remove stale
3070 2009-06-11 Aleksandar Ristovski <aristovski@qnx.com>
3072 * nto-tdep.h (nto_generic_supply_gpregset)
3073 (nto_generic_supply_fpregset, nto_generic_supply_altregset): Remove.
3074 * nto-tdep.c (nto_generic_supply_gpregset)
3075 (nto_generic_supply_fpregset, nto_generic_supply_altregset): Remove.
3077 2009-06-11 Aleksandar Ristovski <aristovski@qnx.com>
3079 * i386-nto-tdep.c (I386_NTO_SIGCONTEXT_OFFSET): Remove define.
3080 (i386nto_sigcontext_addr): Change the way context address is calculated.
3081 (i386nto_init_abi): Remove usage of deprecated sc_reg_offset and
3082 sc_sp_offset and set sc_reg_offset and sc_num_regs.
3084 2009-06-11 Aleksandar Ristovski <aristovski@qnx.com>
3086 * i386-nto-tdep.c (i386_nto_target): Remove definition.
3087 (init_i386nto_ops): Use macros to set fields to global
3088 current_nto_target directly.
3089 (i386nto_init_abi): Remove unused nto_set_target call.
3090 * nto-tdep.h (nto_set_target): Remove unused declaration.
3091 * nto-tdep.c (nto_set_target): Remove unused function.
3093 2009-06-11 Pedro Alves <pedro@codesourcery.com>
3095 * breakpoint.c (break_command_really): Rename local variable
3096 breakpoint_chain to bkpt_chain.
3098 2009-06-11 Aleksandar Ristovski <aristovski@qnx.com>
3100 Add support for XMM registers.
3101 * i386-nto-tdep.c (i386nto_regset_id): Add case for SSE register set.
3102 (i386nto_register_area): Correctly calculate offsets and sizes for
3103 all supported registers.
3105 2009-06-11 Tom Tromey <tromey@redhat.com>
3107 * eval.c (evaluate_subexp_standard) <OP_OBJC_MSGCALL>: Remove
3108 'static' from local variable definitions.
3110 2009-06-11 Pedro Alves <pedro@codesourcery.com>
3112 * symtab.c (append_expanded_sal): Remove unused local variables.
3114 2009-06-11 Pedro Alves <pedro@codesourcery.com>
3116 * infrun.c (sched_multi): New global.
3117 (resume): If sched_multi is set, resume only threads of the
3119 (prepare_to_proceed): Don't switch over to wait_ptid if we're
3120 resuming a different inferior, and sched_multi is off.
3121 (show_schedule_multiple): New.
3122 (_initialize_infrun): Register new "set schedule-multiple" command.
3123 * inferior.h (sched_multi): Declare.
3124 * NEWS: Mention new "schedule-multiple" setting.
3126 2009-06-11 Pedro Alves <pedro@codesourcery.com>
3128 * varobj.c (varobj_create): Properly restore the selected frame.
3130 2009-06-05 Tom Tromey <tromey@redhat.com>
3132 * inferior.c (print_inferior): Make a table, not a list. Emit
3135 2009-06-10 Jonas Maebe <jonas.maebe@elis.ugent.be>
3137 * darwin-nat.c (darwin_stop_inferior): Pass 0 as options to
3138 darwin_wait (blocking wait).
3139 (darwin_kill_inferior): Likewise.
3141 2009-06-10 Pedro Alves <pedro@codesourcery.com>
3143 * infrun.c (handle_inferior_event): Update comment around trying
3144 to revert back to a stepping thread that has exited.
3146 2009-06-10 Cary Coutant <ccoutant@google.com>
3148 * dwarf2read.c (dwarf_decode_lines): Recognize and ignore
3149 DW_LNE_set_discriminator.
3151 2009-06-10 Pierre Muller <muller@ics.u-strasbg.fr>
3153 * breakpoint.c: ARI fixes.
3154 (create_overlay_event_breakpoint): Avoid assignment inside if statement.
3155 (print_one_breakpoint_location): Likewise.
3156 (create_longjmp_breakpoint): Likewise.
3157 (tracepoint_save_command): Likewise
3158 (bpstat_find_step_resume_breakpoint): No operator at end of line.
3159 (bpstat_stop_status): Likewise.
3160 (describe_other_breakpoints): Likewise.
3161 (hw_watchpoint_used_count): Likewise.
3162 (expand_line_sal_maybe): Likewise.
3163 (break_command_really): Likewise.
3164 (delete_command): Likewise.
3165 (do_enable_breakpoint): Likewise.
3166 (delete_trace_command): Likewise.
3167 (catch_exception_command_1): Likewise and remove extra parentheses.
3169 2009-06-08 Pierre Muller <muller@ics.u-strasbg.fr>
3171 * breakpoint.c (_initialize_breakpoint): Remove "bu" command alias of
3172 "ubreak" command that does not exist.
3174 2009-06-08 Pierre Muller <muller@ics.u-strasbg.fr>
3176 * cli/cli-decode.c (add_alias_cmd): Correct assertion.
3178 2009-06-07 Pedro Alves <pedro@codesourcery.com>
3180 * hppa-tdep.c (_initialize_hppa_tdep): Add declaration.
3182 2009-06-07 Pedro Alves <pedro@codesourcery.com>
3185 * proc-utils.h (procfs_first_available): Don't declare here.
3186 * sol-thread.c: Include procfs.h instead of sys/procfs.h and
3188 * procfs.c: Include procfs.h.
3189 (procfs_target): Make it public. Don't register
3190 procfs_can_use_hw_breakpoint here.
3191 (proc_set_watchpoint): Check for PCWATCH or PIOCSWATCH being
3192 defined instead of TARGET_HAS_HARDWARE_WATCHPOINTS.
3193 (procfs_can_use_hw_breakpoint): Remove check of
3194 TARGET_HAS_HARDWARE_WATCHPOINTS.
3195 (procfs_use_watchpoints): Register procfs_can_use_hw_breakpoint
3197 (_initialize_procfs): Don't add the procfs target here.
3199 * i386-sol2-nat.c: Include target.h and procfs.h.
3200 (_initialize_amd64_sol2_nat): Install the procfs target here,
3201 customized with watchpoints support.
3202 * irix5-nat.c: Include target.h.
3203 (_initialize_core_irix5): Rename to ...
3204 (_initialize_irix5_nat): ... this. Install the procfs target
3205 here, customized with watchpoints support.
3206 * alpha-nat.c: Include procfs.h.
3207 (_initialize_core_alpha): Rename to...
3208 (_initialize_alpha_nat): ... this. Install the procfs target
3209 here, customized with watchpoints support.
3210 * sparc-sol2-nat.c: Include target.h and procfs.h.
3211 (_initialize_sparc_sol2_nat): New.
3213 * config/i386/nm-i386sol2.h (TARGET_HAS_HARDWARE_WATCHPOINTS): Delete.
3214 * config/sparc/nm-sol2.h (TARGET_HAS_HARDWARE_WATCHPOINTS): Delete.
3215 * config/mips/irix5.mh (NAT_FILE): Delete.
3216 * config/mips/irix6.mh (NAT_FILE): Delete.
3217 * config/mips/nm-irix5.h: Delete.
3219 20009-06-07 Pedro Alves <pedro@codesourcery.com>
3221 * auxv.c (procfs_xfer_auxv): Change type of the `object' argument
3222 to enum target_object. Cleanup comments.
3223 * auxv.h: Include "target.h". Cleanup comments to not mention
3224 NATIVE_XFER_AUXV anymore.
3226 2009-06-07 Pedro Alves <pedro@codesourcery.com>
3228 * inferior.h (procfs_first_available): Move declaration to...
3229 * proc-utils.h: ... here.
3230 * sol-thread.c: Include procfs.h and proc-utils.h.
3232 2009-06-07 Pedro Alves <pedro@codesourcery.com>
3234 * inferior.h (proc_iterate_over_mappings): Delete declaration.
3235 * nto-tdep.h (proc_iterate_over_mappings): Delete declaration.
3236 * procfs.c (proc_iterate_over_mappings): Delete.
3238 2009-06-07 Pedro Alves <pedro@codesourcery.com>
3240 * target.h (struct target_ops): Make to_has_all_memory,
3241 to_has_memory, to_has_stack, to_has_registers and to_has_execution
3242 methods instead of variables.
3243 (target_has_all_memory_1, target_has_memory_1, target_has_stack_1)
3244 (target_has_registers_1, target_has_execution_1): Declare
3246 (target_has_all_memory): Rewrite to call target_has_all_memory_1.
3247 (target_has_memory): Rewrite to call target_has_memory_1.
3248 (target_has_stack): Rewrite to call target_has_all_stack_1.
3249 (target_has_registers): Rewrite to call target_has_registers_1.
3250 (target_has_execution): Rewrite to call target_has_execution_1.
3251 (default_child_has_all_memory, default_child_has_memory)
3252 (default_child_has_stack, default_child_has_registers)
3253 (default_child_has_execution): Declare.
3254 (target_mark_running, target_mark_exited): Delete declarations.
3255 * target.c (default_child_has_all_memory,
3256 default_child_has_memory, default_child_has_stack,
3257 default_child_has_registers, default_child_has_execution): New.
3258 (target_has_all_memory_1, target_has_memory_1, target_has_stack_1,
3259 target_has_registers_1, target_has_execution_1): New.
3260 (add_target): Default the to_has_all_memory, to_has_all_memory,
3261 to_has_memory, to_has_stack, to_has_registers and to_has_execution
3262 callbacks to return 0.
3263 (update_current_target): Do not inherit to_has_all_memory,
3264 to_has_memory, to_has_stack, to_has_registers or to_has_execution.
3265 (target_mark_running, target_mark_exited): Delete.
3266 (memory_xfer_partial): Adjust.
3267 (target_read_memory, target_write_memory, target_search_memory):
3268 Dispatch to the the top-most target, not the flattened
3270 (target_info): Adjust.
3271 (init_dummy_target): Install return_zero as callback for
3272 to_has_all_memory, to_has_memory, to_has_stack, to_has_registers,
3274 (set_maintenance_target_async_permitted): Use have_live_inferiors
3275 instead of target_has_execution.
3276 * target-memory.c (target_write_memory_blocks): Dispatch memory
3277 writes to the the top-most target, not the flattened
3280 * breakpoint.c (insert_breakpoints): Don't check for
3281 target_has_execution here.
3282 (update_global_location_list): Check if there are live inferiors
3283 to debug instead of target_has_execution.
3284 * infcmd.c (kill_command, detach_command): Check if there are
3285 inferiors instead of target_has_execution.
3286 * inferior.h (have_live_inferiors): Declare.
3287 * inferior.c (have_live_inferiors): New.
3288 * infrun.c (normal_stop): Don't check for target_has_execution to
3289 finish the thread states.
3290 * thread.c (is_thread_state, is_stopped, is_exited, is_running)
3291 (any_running, is_executing): Remove checks for
3292 target_has_execution.
3293 * top.c (kill_or_detach): Don't try to kill core inferiors.
3294 (quit_target): Don't check for target_has_execution.
3296 * corelow.c (core_has_memory, core_has_stack, core_has_registers):
3298 (init_core_ops): Install core_has_memory, core_has_stack and
3300 * exec.c (exec_has_memory): New.
3301 (init_exec_ops): Install exec_has_memory.
3302 * remote.c (remote_add_inferior): Don't call target_mark_running.
3303 (remote_start_remote): Don't call target_mark_exited or call
3304 target_mark_running.
3305 (remote_open_1): Use have_inferiors instead of
3306 target_has_execution. Don't use target_mark_exited.
3307 (init_remote_ops): Install deafult_child_has_all_memory,
3308 default_child_has_memory, default_child_has_stack,
3309 default_child_has_registers, default_child_has_execution.
3310 * bsd-kvm.c (bsd_kvm_return_one): New.
3311 (bsd_kvm_add_target): Register bsd_kvm_return_one as
3312 to_has_memory, to_has_stack and to_has_registers callbacks.
3313 * remote-m32r-sdi.c (m32r_return_one): New.
3314 (init_m32r_ops): Register it.
3315 * inf-child.c (inf_child_target): Adjust to register
3316 default_child_has_all_memory, default_child_has_memory,
3317 default_child_has_stack, default_child_has_registers,
3318 default_child_has_execution callbacks.
3319 * gnu-nat.c (init_gnu_ops): Likewise.
3320 * go32-nat.c (init_go32_ops): Likewise.
3321 * hpux-thread.c (init_hpux_thread_ops): Likewise.
3322 * monitor.c (init_base_monitor_ops): Likewise.
3323 * nto-procfs.c (init_procfs_ops): Likewise.
3324 * remote-mips.c (_initialize_remote_mips): Likewise.
3325 * windows-nat.c (init_windows_ops): Likewise.
3326 * remote-sim.c (gdbsim_create_inferior): Don't use
3327 target_mark_running or target_mark_exited.
3328 (gdbsim_mourn_inferior): Don't call target_mark_exited.
3329 (init_gdbsim_ops): Adjust to register
3330 default_child_has_all_memory, default_child_has_memory,
3331 default_child_has_stack, default_child_has_registers,
3332 default_child_has_execution callbacks.
3334 * linux-nat.c (linux_nat_xfer_partial): If reading memory, and
3335 there's no inferior selected, defer to a lower stratum.
3337 2009-06-05 Tom Tromey <tromey@redhat.com>
3339 * varobj.c (update_dynamic_varobj_children): Wrap error text in
3341 (install_visualizer): Likewise.
3342 (varobj_set_visualizer): Likewise.
3344 2009-06-05 Marc Khouzam <marc.khouzam@ericsson.com>
3346 * mi/mi-main.c (mi_cmd_exec_continue)
3347 (mi_cmd_exec_interrupt): Adjust parsing of thread group
3348 ids to current reality, where they don't have any 'p' prefix.
3350 2009-06-05 Aleksandar Ristovski <aristovski@qnx.com>
3352 * corelow.c (core_open): Check for core_gdbarch before calling
3353 gdbarch_target_signal_from_host.
3355 2009-06-05 Tom Tromey <tromey@redhat.com>
3357 * c-exp.y (parse_number): Don't use K&R definition.
3359 (yyerror): Likewise.
3361 2009-06-04 Jan Kratochvil <jan.kratochvil@redhat.com>
3363 * varobj.c (varobj_update): Fix out of scope varobjs to not to change.
3365 2009-06-04 Ulrich Weigand <uweigand@de.ibm.com>
3367 * symtab.h: Rename SYMBOL_OPS to SYMBOL_COMPUTED_OPS.
3368 * ax-gdb.c (gen_var_ref): Likewise.
3369 * findvar.c (read_var_value, symbol_read_needs_frame): Likewise.
3370 * printcmd.c (address_info): Likewise.
3371 * dwarf2loc.c (dwarf_expr_frame_base): Likewise.
3372 * dwarf2read.c (dwarf2_symbol_mark_computed): Likewise.
3373 * symtab.h: Rename struct symbol_ops to struct symbol_computed_ops.
3374 * dwarf2loc.h: Likewise.
3375 * dwarf2loc.c (dwarf2_locexpr_funcs, dwarf2_loclist_funcs): Likewise.
3377 * symtab.h: (struct symbol_register_ops): New struct definition.
3378 (struct symbol): Make "ops" member a union of symbol_computed_ops and
3379 symbol_register_ops callback pointers.
3380 (SYMBOL_REGISTER_OPS): New macro.
3381 * tracepoint.c: Include "objfiles.h".
3382 (scope_info, collect_symbol): Use SYMBOL_REGISTER_OPS register_number
3383 callback to retrieve register numbers.
3384 * ax-gdb.c (gen_var_ref): Likewise.
3385 * findvar.c (read_var_value): Likewise.
3386 * printcmd.c (address_info): Likewise.
3388 * coffread.c (coff_reg_to_regnum): New function.
3389 (coff_register_funcs): New static variable.
3390 (process_coff_symbol): Do not call gdbarch_sdb_reg_to_regnum.
3391 Install SYMBOL_REGISTER_OPS callbacks.
3392 * mdebugread.c (mdebug_reg_to_regnum): New function.
3393 (mdebug_register_funcs): New static variable.
3394 (parse_symbol): Do not call gdbarch_ecoff_reg_to_regnum.
3395 Install SYMBOL_REGISTER_OPS callbacks.
3396 * stabsread.c (stab_reg_to_regnum): New function.
3397 (stab_register_funcs): New static variable.
3398 (define_symbol): Do not call gdbarch_stab_reg_to_regnum.
3399 Install SYMBOL_REGISTER_OPS callbacks.
3401 2009-06-03 Doug Evans <dje@google.com>
3403 * symfile.c (reread_symbols): Reset psymtabs_addrmap to NULL
3404 after discarding its contents.
3406 2009-06-03 Pedro Alves <pedro@codesourcery.com>
3408 * target.c: Include "exec.h".
3409 (update_current_target): Don't inherit to_sections or
3411 (target_get_section_table): New.
3412 (target_section_by_addr): Fetch the section table from the passed
3414 (memory_xfer_partial): Handle unmapped overlay sections before
3415 anything else. Get the overlay mapped address here. Adjust to
3416 use section_table_xfer_memory_partial.
3417 (get_target_memory): Request a TARGET_OBJECT_RAW_MEMORY object
3418 instead of TARGET_OBJECT_MEMORY.
3419 (target_resize_to_sections): Delete.
3420 (remove_target_sections): Adjust to remove target sections from
3421 `current_target_sections', and use resize_section_table.
3422 * target.h (struct target_ops) <to_sections, to_sections_end>:
3424 <to_get_section_table>: New method.
3425 (xfer_memory, print_section_info): Delete declarations.
3426 (struct target_section_table): New type.
3427 (target_get_section_table): Declare.
3428 (target_resize_to_sections): Delete declaration.
3429 (remove_target_sections): Delete declaration.
3430 * bfd-target.c (target_bfd_xfer_partial): Get the section table
3432 (target_bfd_get_section_table): New.
3433 (target_bfd_xclose): Adjust.
3434 (target_bfd_reopen): Store the section table in the to_data field.
3435 * corelow.c (core_data): New.
3436 (core_close): Adjust to release core_data and its sections.
3437 (core_open): Allocate core_data, and build its target sections
3439 (deprecated_core_resize_section_table): New.
3440 (core_files_info): Pass core_data to print_section_info.
3441 (core_xfer_partial): Adjust to use
3442 section_table_xfer_memory_partial for TARGET_OBJECT_MEMORY xfers.
3443 (init_core_ops): Do not install a deprecated_xfer_memory callback
3445 * solib.c (update_solib_list): Add the shared library sections
3446 to the current target sections table.
3447 * exec.c (current_target_sections_1): New global.
3448 (current_target_sections): New global.
3449 (exec_close_1): New function, refactored from exec_close. Remove
3450 the exec_bfd's sections from the current target sections table.
3451 Adjust to not use to_sections.
3452 (exec_close): Remove all target sections. Call exec_close_1.
3453 (exec_file_clear): Use exec_close_1 instead of unpushing the
3455 (exec_file_attach): Likewise. Adjust to not use to_sections. Add
3456 exec_bfd's sections to the current target sections table. Don't
3457 push the exec_ops target here.
3458 (resize_section_table): New.
3459 (add_target_sections): New.
3460 (remove_target_sections): Moved here.
3461 (section_table_xfer_memory): Adjust to implement the xfer_partial
3462 interface, and rename to...
3463 (section_table_xfer_memory_partial): ... this, replacing the
3464 current function of that same name.
3465 (exec_get_section_table): New.
3466 (exec_xfer_partial): New.
3467 (xfer_memory): Delete.
3468 (print_section_info): Replace the target_ops parameter by a
3469 target_section_table parameter.
3470 (exec_files_info, set_section_command, exec_set_section_address):
3471 Adjust to use the current sections table.
3472 (init_exec_ops): Do not register a deprecated_xfer_memory
3473 callback. Register to_xfer_partial and to_get_section_table
3475 * infrun.c (handle_inferior_event): Update comments around
3477 * rs6000-nat.c (xcoff_relocate_core): Adjust to use
3478 deprecated_core_resize_section_table.
3479 * exec.h (resize_section_table): Declare.
3480 (section_table_xfer_memory_partial): Add const char * argument.
3481 (remove_target_sections): Declare here.
3482 (add_target_sections): Declare.
3483 (print_section_info): Declare here.
3484 * gdbcore.h (deprecated_core_resize_section_table): Declare.
3486 2009-06-03 Ulrich Weigand <uweigand@de.ibm.com>
3488 * value.h (struct internalvar): Remove.
3489 (get_internalvar_integer): Add prototype.
3490 (set_internalvar_integer): Add prototype.
3491 (clear_internalvar): Add prototype.
3493 * value.c (struct internalvar): Move here. Add type member. Remove
3494 endian member. Add union_internalvar member instead of value member.
3495 (init_if_undefined_command): Use intvar->type.
3496 (create_internalvar): Do not initialize value/endian, but type.
3497 (create_internalvar_type_lazy): Call create_internalvar.
3498 (value_of_internalvar): Handle host-side internalvar contents.
3499 (set_internalvar_component): Likewise.
3500 (set_internalvar): Likewise.
3501 (get_internalvar_integer): New function.
3502 (clear_internalvar): Likewise.
3503 (set_internalvar_integer): Likewise.
3504 (preserve_values): Handle host-side internalvar contents.
3506 * breakpoint.c (set_breakpoint_count, set_tracepoint_count): Call
3507 set_internalvar_integer instead of set_internalvar.
3508 * findcmd.c (find_command): Likewise.
3509 * infrun.c (handle_inferior_event): Likewise.
3510 * source.c (forward_search_command, reverse_search_command): Likewise.
3511 * tracepoint.c (set_traceframe_num, set_tracepoint_num,
3512 set_traceframe_context): Likewise.
3514 * printcmd.c (x_command): Call clear_internalvar instead of
3516 * tracepoint.c (set_traceframe_context): Likewise.
3518 * breakpoint.c (get_number_trailer): Call get_internalvar_integer
3519 instead of value_of_internalvar.
3520 * linespec.c (decode_dollar): Likewise.
3522 * expprint.c (dump_subexp_body_standard): Use internalvar_name
3523 instead of accessing internalvar private elements.
3524 * valops.c (value_assign): Copy from original source instead of
3525 accessing internalvar private elements.
3527 2009-06-03 Ulrich Weigand <uweigand@de.ibm.com>
3529 * scm-lang.c (builtin_type_scm): Remove.
3530 (scm_lookup_name): Add GDBARCH parameter. Use it instead of
3531 objfile architecture. Use per-architecture builtin_scm_type instead
3532 of builtin_type_scm.
3533 (evaluate_exp): Pass expression architecture to scm_lookup_name.
3535 (scm_get_field): Add SIZE parameter. Use it instead of
3536 TYPE_LENGTH (builtin_type_scm).
3538 (build_scm_types): New function.
3539 (scm_type_data): New variable.
3540 (builtin_scm_type): New function.
3541 (_initialize_scheme_language): Do not initialize builtin_type_scm.
3542 Register build_scm_types as post-init function for scm_type_data.
3544 * scm-exp.c (scm_lreadr): Use per-architecture builtin_scm_type
3545 instead of builtin_type_scm.
3547 * scm-lang.h (SCM_CAR, SCM_CDR): Pass SCM_SIZE to scm_get_field.
3548 (scm_get_field): Add SIZE paramter.
3549 (scm_scmval_print): Remove prototype.
3550 (builtin_type_scm): Remove.
3551 (struct builtin_scm_type): Add structure definition.
3552 (builtin_scm_type): Add prototype.
3554 * scm-valprint.c (scm_inferior_print): Add TYPE parameter. Use it
3555 instead of builtin_core_addr type; do not use objfile architecture.
3556 (scm_scmlist_print): Add TYPE parameter. Use it to define SCM_SIZE.
3557 Pass type to scm_scmval_print.
3558 (scm_ipruk): Add TYPE parameter. Use it to define SCM_SIZE.
3559 (scm_scmval_print): Make static. Add TYPE parameter. Use it to
3560 define SCM_SIZE. Pass type to scm_ipruk and scm_scmlist_print.
3561 (scm_val_print): Pass type to scm_inferior_print and scm_scmval_print.
3563 2009-06-03 Ulrich Weigand <uweigand@de.ibm.com>
3565 * mdebugread.c (mdebug_type_void, mdebug_type_char, mdebug_type_short,
3566 mdebug_type_int, mdebug_type_int_32, mdebug_type_int_64,
3567 mdebug_type_long_32, mdebug_type_long_64, mdebug_type_long_long_64,
3568 mdebug_type_unsigned_char, mdebug_type_unsigned_short,
3569 mdebug_type_unsigned_int_32, mdebug_type_unsigned_int_64,
3570 mdebug_type_unsigned_long_32, mdebug_type_unsigned_long_64,
3571 mdebug_type_unsigned_long_long_64, mdebug_type_adr_32,
3572 mdebug_type_adr_64, mdebug_type_float, mdebug_type_double,
3573 mdebug_type_complex, mdebug_type_double_complex,
3574 mdebug_type_fixed_dec, mdebug_type_float_dec, mdebug_type_string):
3577 (basic_type_data): New global variable.
3578 (basic_type): New function.
3579 (parse_type): Remove static basic type map map_bt. Call basic_type
3580 to get basic types instead of using mdebug_type_ variables.
3582 (parse_symbol): Use builtin types instead of mdebug_type_ variables.
3583 (upgrade_type): Likewise.
3584 (parse_procedure): Likewise.
3585 (psymtab_to_symtab_1): Likewise.
3587 (_initialize_mdebugread): Do not initialize mdebug_type_ variables.
3588 Initialize basic_type_data.
3590 2009-06-03 Ulrich Weigand <uweigand@de.ibm.com>
3592 * dfp.h (decimal_binop): Convert LEN_RESULT to input parameter.
3593 * dfp.c (promote_decimal): Remove.
3594 (decimal_binop): Convert LEN_RESULT to input parameter.
3595 Remove call to decimal_binop.
3596 (decimal_compare): Remove call to decimal_binop.
3598 * valarith.c (value_binop): Pass desired result type length
3601 2009-06-01 Tristan Gingold <gingold@adacore.com>
3603 * configure.tgt (avr): Set gdb_sim to use the simulator.
3605 2009-05-29 Doug Evans <dje@google.com>
3607 * infrun.c (prepare_to_proceed): Document. Assert !non_stop.
3608 If scheduler-locking is enabled, we're not going to be singlestepping
3609 any other previously stopped thread.
3611 2009-05-29 Pedro Alves <pedro@codesourcery.com>
3613 * mi/mi-interp.c (mi_on_resume): Initialize `count' to 0.
3615 2009-05-29 Eli Zaretskii <eliz@gnu.org>
3617 * i386-tdep.c (i386_go32_init_abi): Use SVR4 register numbering
3618 for stabs and COFF debug info.
3620 2009-05-28 Pedro Alves <pedro@codesourcery.com>
3622 * infrun.c (handle_inferior_event): When thread hoping, switch
3623 inferior_ptid to the event thread before removing breakpoints from
3624 the target. If not stopping, also try to revert back to a thread
3625 that was doing a "next". Check if that thread still exists before
3627 (currently_stepping_thread): Delete and merge with ...
3628 (currently_stepping): ... this.
3629 (currently_stepping_callback): Rename to ...
3630 (currently_stepping_or_nexting_callback): ... this, and also
3631 return true if the thread was stepping over a call (has a
3632 step-resume breakpoint).
3634 2009-05-28 Tom Tromey <tromey@redhat.com>
3636 * python/python.c (gdbpy_parameter): Rename. Fix error message.
3637 (GdbMethods): Change "get_parameter" to "parameter".
3639 2009-05-28 Pierre Muller <muller@ics.u-strasbg.fr>
3640 Paul Pluzhnikov <ppluzhnikov@google.com>
3642 * configure.ac (!have_libpython): Add python-prettyprint source
3644 * configure: Regenerate.
3645 * python/python-prettyprint.c: Move "#ifdef HAVE_PYTHON" before
3648 2009-05-27 Vladimir Prus <vladimir@codesourcery.com>
3649 Tom Tromey <tromey@redhat.com>
3650 Thiago Jung Bauermann <bauerman@br.ibm.com>
3652 * mi/mi-main.c (mi_cmd_list_features): List "python" feature.
3653 * varobj.h (varobj_set_visualizer): Declare.
3654 (varobj_get_display_hint): Likewise.
3655 (varobj_update_result_t) <children_changed, value_installed>: New
3657 * mi/mi-cmds.c (mi_cmds): Add var-set-visualizer.
3658 * mi/mi-cmds.h (mi_cmd_var_set_visualizer,
3659 mi_cmd_var_set_child_range): Declare.
3660 * mi/mi-cmd-var.c (mi_cmd_var_set_visualizer): New function.
3661 (mi_cmd_var_list_children): Emit display hint.
3662 (varobj_update_one): Emit display hint. Handle dynamic children.
3663 * python/python.c (GdbMethods): Add "default_visualizer".
3664 * python/python-internal.h (apply_varobj_pretty_printer,
3665 gdbpy_get_varobj_pretty_printer, gdbpy_get_display_hint):
3667 (gdbpy_default_visualizer): Likewise.
3668 * varobj.c: Include python.h, python-internal.h.
3669 (PyObject): New typedef.
3670 (struct varobj) <children_requested, pretty_printer>: New fields.
3671 (varobj_create): Call install_default_visualizer.
3672 (instantiate_pretty_printer): New function.
3673 (varobj_set_display_format): Update.
3674 (varobj_get_display_hint): New function.
3675 (update_dynamic_varobj_children): New function.
3676 (varobj_get_num_children): Handle dynamic children.
3677 (varobj_list_children): Likewise.
3678 (install_new_value): Likewise.
3679 (varobj_add_child): New function.
3680 (install_visualizer): Likewise.
3681 (install_default_visualizer): Likewise.
3682 (varobj_set_visualizer): Likewise.
3683 (varobj_update): Handle dynamic children.
3684 (create_child): Use create_child_with_value.
3685 (create_child_with_value): New function.
3686 (value_get_print_value): Call pretty printer. Add value_formatter
3688 (c_value_of_variable): Update.
3689 (varobj_invalidate): Always free all_rootvarobj.
3690 * python/python-prettyprint.c (apply_varobj_pretty_printer): New
3692 (gdbpy_get_varobj_pretty_printer): Likewise.
3693 (gdbpy_default_visualizer): Likewise.
3695 2009-05-27 Tom Tromey <tromey@redhat.com>
3696 Thiago Jung Bauermann <bauerman@br.ibm.com>
3697 Phil Muldoon <pmuldoon@redhat.com>
3698 Paul Pluzhnikov <ppluzhnikov@google.com>
3699 Vladimir Prus <vladimir@codesourcery.com>
3701 * python/python-value.c (value_object_to_value): New function.
3702 * python/python-internal.h: Include frameobject.h.
3703 (gdbpy_children_cst, gdbpy_to_string_cst, gdbpy_display_hint_cst):
3705 (value_object_to_value): Declare.
3706 * printcmd.c (struct format_data) <raw>: New field.
3707 (last_format): Default to 0.
3708 (decode_format): Initialize val.raw. Handle /r flag.
3709 (print_command_1): Initialize fmt.raw and opts.raw.
3710 (output_command): Likewise.
3711 (x_command): Fix initialization of fmt.format. Initialize
3713 (display_command): Initialize fmt.raw.
3714 (do_one_display): Set opts.raw.
3715 * python/python.c (gdbpy_to_string_cst, gdbpy_children_cst,
3716 gdbpy_display_hint_cst): New globals.
3717 (_initialize_python): Initialize them. Set gdb.pretty_printers.
3718 * cp-valprint.c: Include python.h.
3719 (cp_print_value): Call apply_val_pretty_printer.
3720 * python/python.h (apply_val_pretty_printer): Declare.
3721 * stack.c (print_this_frame_argument_p): Remove.
3722 (print_frame_args): Compute summary flag. Don't use
3723 print_this_frame_argument_p.
3724 * valprint.c: Include python.h.
3725 (user_print_options): Initialize new fields.
3726 (scalar_type_p): New function.
3727 (val_print): Handle 'raw' and 'summary' modes. Call
3728 apply_val_pretty_printer.
3729 (value_print): Handle 'raw' mode.
3730 * valprint.h (struct value_print_options) <raw, summary>: New
3732 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-prettyprint.o
3733 (SUBDIR_PYTHON_SRCS): Add python-prettyprint.c.
3734 (python-prettyprint.o): New target.
3735 * python/python-prettyprint.c: New file.
3737 2009-05-27 Tom Tromey <tromey@redhat.com>
3738 Paul Pluzhnikov <ppluzhnikov@google.com>
3740 * mi/mi-main.c (mi_cmd_data_evaluate_expression): Use
3742 * cli/cli-dump.c (dump_value_to_file): Use value_address.
3743 * valprint.c (common_val_print): Likewise.
3744 * v850-tdep.c (v850_push_dummy_call): Use value_address.
3745 * tracepoint.c (encode_actions): Use value_address.
3746 * printcmd.c (print_formatted): Use value_address.
3747 (x_command): Likewise.
3748 * p-valprint.c (pascal_object_print_static_field): Use
3750 * mn10300-tdep.c (mn10300_push_dummy_call): Use value_address.
3751 * mips-tdep.c (mips_eabi_push_dummy_call): Use value_address.
3752 * m32r-tdep.c (m32r_push_dummy_call): Use value_address.
3753 * jv-valprint.c (java_value_print): Use value_address.
3754 * infcall.c (find_function_addr): Use value_address.
3755 * gnu-v3-abi.c (gnuv3_rtti_type): Use value_address.
3756 * gnu-v2-abi.c (gnuv2_value_rtti_type): Use value_address.
3757 * frv-tdep.c (frv_push_dummy_call): Use value_address.
3758 * frame.c (frame_register_unwind): Use value_address.
3759 (frame_unwind_register_value): Likewise.
3760 * darwin-nat-info.c (info_mach_region_command): Use
3762 * cp-valprint.c (cp_print_static_field): Use value_address.
3763 * c-valprint.c (c_value_print): Use value_address.
3764 * breakpoint.c (update_watchpoint): Use value_address.
3765 (can_use_hardware_watchpoint): Likewise.
3766 * ada-valprint.c (ada_val_print_1): Use value_address.
3767 (ada_value_print): Likewise.
3768 * ada-tasks.c (read_fat_string_value): Use value_address.
3769 * jv-lang.c (java_link_class_type): Use set_value_address.
3770 (java_link_class_type): Likewise.
3771 (get_java_utf8_name): Use value_address.
3772 (type_from_class): Likewise.
3773 (java_link_class_type): Likewise.
3774 * findvar.c (value_of_register): Use set_value_address.
3775 (read_var_value): Likewise.
3776 (read_var_value): Likewise.
3777 * eval.c (evaluate_subexp_standard): Use set_value_address.
3778 (evaluate_subexp_standard): Use value_address.
3779 * dwarf2loc.c (dwarf2_evaluate_loc_desc): Use set_value_address.
3780 * ada-lang.c (coerce_unspec_val_to_type): Use set_value_address.
3781 (ada_value_primitive_packed_val): Likewise.
3782 (ensure_lval): Likewise.
3783 (thin_data_pntr): Use value_address.
3784 (desc_bounds): Likewise.
3785 (ada_value_primitive_packed_val): Likewise.
3786 (value_assign_to_component): Likewise.
3787 (ensure_lval): Likewise.
3788 (make_array_descriptor): Likewise.
3789 (ada_to_fixed_value): Likewise.
3790 (unwrap_value): Likewise.
3791 * value.c (deprecated_value_address_hack): Remove.
3792 (value_address): New function.
3793 (value_raw_address): Likewise.
3794 (set_value_address): Likewise.
3795 (value_fn_field): Use set_value_address.
3796 (value_from_contents_and_address): Likewise.
3797 (value_fn_field): Likewise.
3798 (allocate_value_lazy): Don't use VALUE_ADDRESS.
3799 (value_as_address): Use value_address.
3800 (value_static_field): Likewise.
3801 * valops.c (search_struct_field): Use set_value_address.
3802 (value_at): Likewise.
3803 (value_at_lazy): Likewise.
3804 (value_repeat): Likewise.
3805 (value_cast_structs): Use value_address.
3806 (value_cast): Likewise.
3807 (value_fetch_lazy): Likewise.
3808 (value_assign): Likewise.
3809 (value_repeat): Likewise.
3810 (address_of_variable): Likewise.
3811 (value_coerce_array): Likewise.
3812 (value_coerce_function): Likewise.
3813 (value_addr): Likewise.
3814 (search_struct_field): Likewise.
3815 (search_struct_method): Likewise.
3816 (find_method_list): Likewise.
3817 (value_struct_elt_for_reference): Likewise.
3818 (value_full_object): Likewise.
3819 * jv-valprint.c (java_value_print): Use set_value_address.
3820 * value.h (deprecated_value_address_hack): Remove.
3821 (VALUE_ADDRESS): Remove.
3822 (value_address): Declare.
3823 (value_raw_address): Declare.
3824 (set_value_address): Declare.
3826 2009-05-27 Tom Tromey <tromey@redhat.com>
3827 Thiago Jung Bauermann <bauerman@br.ibm.com>
3828 Phil Muldoon <pmuldoon@redhat.com>
3829 Paul Pluzhnikov <ppluzhnikov@google.com>
3831 * python/python.c (_initialize_python): Call
3832 gdbpy_initialize_types.
3833 (GdbMethods): Add "lookup_type".
3834 * python/python-value.c (value_object) <type>: New field.
3835 (valpy_dealloc): Decref type.
3836 (valpy_new): Initialize type.
3837 (valpy_get_type): New function.
3838 (value_to_value_object): Initialize type.
3839 (valpy_cast): New function.
3840 (value_object_getset): Add "type".
3841 (value_object_methods): Add "cast".
3842 * python/python-internal.h (type_to_type_object): Declare.
3843 (type_object_to_type): Likewise.
3844 (gdbpy_initialize_types): Likewise.
3845 (gdbpy_lookup_type): Declare.
3846 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-type.o.
3847 (SUBDIR_PYTHON_SRCS): Add python-type.c.
3848 (python-type.o): New target.
3849 * python/python-type.c: New file.
3851 2009-05-27 Tom Tromey <tromey@redhat.com>
3852 Thiago Jung Bauermann <bauerman@br.ibm.com>
3853 Phil Muldoon <pmuldoon@redhat.com>
3855 * python/python.c: Include objfiles.h, observer.h.
3856 (gdbpy_auto_load): New global.
3857 (gdbpy_current_objfile): Likewise.
3858 (GDBPY_AUTO_FILENAME): New define.
3859 (gdbpy_new_objfile): New function.
3860 (gdbpy_get_current_objfile): Likewise.
3861 (gdbpy_objfiles): Likewise.
3862 (_initialize_python): Add "maint set auto-load". Call
3863 gdbpy_initialize_objfile. Attach objfile observer.
3864 (GdbMethods): New methods current_objfile, objfiles.
3865 * python/python-objfile.c: New file.
3866 * python/python-internal.h (objfile_to_objfile_object): Declare.
3867 (objfpy_get_printers): Likewise.
3868 (gdbpy_initialize_objfile): Likewise.
3869 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-objfile.o.
3870 (SUBDIR_PYTHON_SRCS): Add python-objfile.c.
3871 (python-objfile.o): New target.
3873 2009-05-27 Pedro Alves <pedro@codesourcery.com>
3875 * infrun.c (follow_exec): Clear the stop_requested flag.
3876 * linux-nat.c (linux_handle_extended_wait) <PTRACE_EVENT_EXEC>:
3879 2009-05-27 Aleksandar Ristovski <aristovski@qnx.com>
3881 * nto-procfs.c (get_regset): Pass correct pointer.
3883 2009-05-26 Doug Evans <dje@google.com>
3885 * dwarf2read.c (follow_die_ref): Add comment.
3886 (dwarf2_mark_helper): Tweak comment.
3887 (dwarf2_mark): Move description to its proper place.
3889 2009-05-25 Pierre Muller <muller@ics.u-strasbg.fr>
3891 * procfs.c (procfs_wait): Add options parameter.
3893 2009-05-24 Doug Evans <dje@google.com>
3895 Global renaming of find_thread_pid to find_thread_ptid.
3896 * gdbthread.h (find_thread_ptid): Renamed from find_thread_pid.
3897 * thread.c (find_thread_ptid): Renamed from find_thread_pid.
3898 All callers updated.
3900 * infrun.c (follow_fork): Initialize new step_* locals
3901 to avoid "may be used uninitialized" warnings.
3903 2009-05-24 Pedro Alves <pedro@codesourcery.com>
3905 * inflow.c (copy_terminal_info): Deep copy `run_terminal'.
3907 2009-05-24 Pedro Alves <pedro@codesourcery.com>
3909 * gdbthread.h (struct thread_info): New `pending_follow' field.
3910 * thread.c (new_thread): New function.
3911 (add_thread_silent): Use it.
3912 * breakpoint.c (internal_breakpoint_number): New global, moved
3914 (create_internal_breakpoint): ... this.
3915 (clone_momentary_breakpoint): New.
3916 * breakpoint.h (clone_momentary_breakpoint): Declare.
3917 * infrun.c (nullify_last_target_wait_ptid): Move declaration
3919 (pending_follow): Delete.
3920 (follow_fork): Handle pending follow fork event here. Moved the
3921 preserving of thread stepping state here.
3922 (resume): Don't handle pending follow fork events here. Only
3923 install the inferior's terminal modes if we're about to resume it.
3924 (proceed): Handle possible pending follow fork events here.
3925 (init_wait_for_inferior): No need to clear pending_follow anymore,
3927 (handle_inferior_event): Adjust to per-thread `pending_follow'.
3928 Call `follow_fork' to handle following the fork. If the
3929 follow-fork is cancelled, stop stepping.
3930 * linux-nat.c (linux_child_follow_fork): Adjust to per-thread
3931 `pending_follow' events. Remove code that handled preserving the
3932 thread stepping state.
3933 * inf-ptrace.c (inf_ptrace_follow_fork): Ditto.
3934 * inf-ttrace.c (inf_ttrace_follow_fork): Ditto.
3936 2009-05-24 Pierre Muller <muller@ics.u-strasbg.fr>
3938 * symfile.c (add_shared_symbol_files_command): Remove
3939 prototype and function.
3940 (_initialize _symfile): Move "add-shared-symbol-files"
3941 command and "assf" alias.
3942 * windows-nat.c (_initialize_windows_nat): to here.
3943 Change "add-shared-symbol-files" to alias.
3945 * config/i386/cygwin.mh: Remove NAT_FILE.
3946 * config/i386/mingw.mh: Remove NAT_FILE.
3947 * config/i386/mingw64.mh: Remove NAT_FILE.
3948 * config/i386/nm-cygwin.h: Remove file.
3949 * config/i386/nm-cygwin64.h: Remove file.
3951 2009-05-24 Hui Zhu <teawater@gmail.com>
3953 * i386-linux-tdep.c (I386_LINUX_RECORD_SIZE_*,
3954 I386_LINUX_RECORD_IOCTL_*,
3955 I386_LINUX_RECORD_FCNTL_*) Removed.
3956 (i386_linux_init_abi): Change size of record from macros to
3959 2009-05-24 Hui Zhu <teawater@gmail.com>
3961 * i386-linux-tdep.c (i386_linux_init_abi): Remove size_char.
3962 * linux-record.c (record_linux_system_call): Ditto.
3963 * linux-record.h (linux_record_tdep): Ditto.
3965 2009-05-23 Jan Kratochvil <jan.kratochvil@redhat.com>
3967 Replace the savestring calls by xstrdup calls where possible.
3968 * breakpoint.c (condition_command, set_raw_breakpoint)
3969 (create_catchpoint, update_breakpoint_locations): Replace the
3970 savestring calls by xstrdup calls where possible.
3971 * buildsym.c (start_subfile, patch_subfile_names, record_debugformat)
3972 (record_producer): Likewise.
3973 * coffread.c (coff_start_symtab, complete_symtab): Likewise.
3974 * corefile.c (set_gnutarget): Likewise.
3975 * dbxread.c (add_new_header_file): Likewise.
3976 * demangle.c (set_demangling_command, set_demangling_style): Likewise.
3977 * event-top.c (push_prompt, pop_prompt, command_line_handler)
3978 (set_async_prompt): Likewise.
3979 * infcmd.c (set_inferior_io_terminal, attach_command_post_wait):
3981 * language.c (set_language_command, _initialize_language): Likewise.
3982 * linespec.c (decode_line_2): Likewise.
3983 * rs6000-nat.c (add_vmap): Likewise.
3984 * top.c (set_prompt, init_history, init_main): Likewise.
3985 * tracepoint.c (stringify_collection_list): Likewise.
3986 * varobj.c (varobj_create): Remove variable expr_len. Replace the
3987 savestring calls by xstrdup calls where possible.
3988 (value_of_root, c_name_of_variable, c_describe_child): Replace the
3989 savestring calls by xstrdup calls where possible.
3990 * xcoffread.c (complete_symtab): Likewise.
3991 * cli/cli-script.c (build_command_line, define_command): Likewise.
3992 * cli/cli-setshow.c (do_setshow_command): Likewise.
3994 2009-05-23 Jan Kratochvil <jan.kratochvil@redhat.com>
3996 Remove already unreachable code.
3997 * varobj.c (varobj_get_handle): Fix comment when error is called.
3998 All callers updated.
4000 2009-05-23 Eli Zaretskii <eliz@gnu.org>
4002 * README (`configure' options): Document GDB-specific options to
4005 * symtab.c (skip_prologue_using_lineinfo): New function.
4006 (find_function_start_sal): Use it to get to the first line of
4007 function's body that has an entry in the lineinfo table.
4009 * symmisc.c (dump_symtab): Switch the current language to
4010 the language of the symtab we are dumping only if the symtab's
4011 language is neither language_auto nor language_unknown.
4013 * coffread.c (coff_symtab_read): Set language_minimal as the
4014 language for the "_globals_" pseudo-file.
4015 (process_coff_symbol): Set the symbol's language to the language
4018 2009-05-22 Pedro Alves <pedro@codesourcery.com>
4020 * target.h (struct section_table): Rename to ...
4021 (struct target_section): ... this.
4022 * exec.c: Adjust all references.
4023 * exec.h: Adjust all references.
4024 * nto-tdep.c: Adjust all references.
4025 * nto-tdep.h: Adjust all references.
4026 * ppc-linux-tdep.c: Adjust all references.
4027 * rs6000-nat.c: Adjust all references.
4028 * s390-tdep.c: Adjust all references.
4029 * solib-darwin.c: Adjust all references.
4030 * solib-frv.c: Adjust all references.
4031 * solib-irix.c: Adjust all references.
4032 * solib-null.c: Adjust all references.
4033 * solib-osf.c: Adjust all references.
4034 * solib-pa64.c: Adjust all references.
4035 * solib-som.c: Adjust all references.
4036 * solib-sunos.c: Adjust all references.
4037 * solib-svr4.c: Adjust all references.
4038 * solib-target.c: Adjust all references.
4039 * solib.c: Adjust all references.
4040 * solist.h: Adjust all references.
4041 * symfile.c: Adjust all references.
4042 * symfile.h: Adjust all references.
4043 * target.c: Adjust all references.
4045 2009-05-22 Hui Zhu <teawater@gmail.com>
4047 Add sys_fcntl argument interfaces to linux_record_tdep.
4049 * linux-record.h (linux_record_tdep): Add fcntl_F_GETLK,
4050 fcntl_F_GETLK64, fcntl_F_SETLK64 and fcntl_F_SETLKW64 to be
4052 * i386-linux-tdep.c (I386_LINUX_RECORD_FCNTL_F_GETLK,
4053 I386_LINUX_RECORD_FCNTL_F_GETLK64,
4054 I386_LINUX_RECORD_FCNTL_F_SETLK64,
4055 I386_LINUX_RECORD_FCNTL_F_SETLKW64): New macros. The values
4056 of I386 Linux sys_fcntl arguments.
4057 (i386_linux_init_abi): Set macros values to linux_record_tdep.
4058 * linux-record.c (record_linux_system_call): Change to use
4059 the interface in linux_record_tdep in sys_fcntl and
4062 * linux-record.c (record_linux_system_call): Fix the process
4063 record build error about type in CYGWIN.
4065 2009-05-22 Pedro Alves <pedro@codesourcery.com>
4067 * inflow.c (kill_command): Delete left over static declaration.
4069 2009-05-22 Pedro Alves <pedro@codesourcery.com>
4071 * bfd-target.c: Don't include gdb_assert.h or gdb_string.h.
4073 (struct section_closure): Delete.
4074 (add_to_section_table): Delete.
4075 (build_target_sections_from_bfd): Delete.
4076 (target_bfd_xfer_partial): Use section_table_xfer_memory_partial.
4077 (target_bfd_reopen): Use build_section_table.
4078 * exec.c (xfer_memory): Move most code except for overlay
4079 debugging support from here...
4080 (section_table_xfer_memory): ... to this new function.
4081 (section_table_xfer_memory_partial): New.
4082 * exec.h (section_table_xfer_memory_partial): Declare.
4083 * bfd-target.h (build_target_sections_from_bfd): Delete
4086 2009-05-22 Pedro Alves <pedro@codesourcery.com>
4088 * remote.c (compare_sections_command): Don't declare exec_bfd.
4089 * tracepoint.c: Include "gdbcore.h".
4090 (remote_set_transparent_ranges): Don't declare exec_bfd.
4092 2009-05-21 Pedro Alves <pedro@codesourcery.com>
4094 * aix-thread.c (init_aix_thread_ops): Whitespace.
4096 2009-05-21 Pedro Alves <pedro@codesourcery.com>
4098 * dec-thread.c (dec_thread_wait): Add options parameter. Use it
4099 to call the to_wait method in the target beneath.
4100 * remote-m32r-sdi.c (m32r_wait): Add options parameter.
4102 2009-05-21 Joel Brobecker <brobecker@adacore.com>
4104 * aix-thread.c (aix_thread_wait): Add options parameter. Use it
4105 to call the to_wait method in the target_beneath.
4107 2009-05-21 Pedro Alves <pedro@codesourcery.com>
4109 * linux-nat.c (linux_nat_terminal_inferior)
4110 (linux_nat_terminal_ours): Don't check sync_execution.
4111 * remote.c (remote_terminal_inferior, remote_terminal_ours):
4112 Don't check sync_execution. Update comments.
4113 * target.c (target_terminal_inferior): New.
4114 * target.h (target_terminal_inferior): Delete macro, and declare
4116 * event-top.c (async_disable_stdin): Make idempotent. Don't give
4117 the target the terminal here.
4118 * inflow.c (terminal_ours_1): Don't return early without setting
4121 2009-05-21 Pedro Alves <pedro@codesourcery.com>
4123 * target.h (TARGET_WNOHANG): New.
4124 * target.c (target_wait): Add `options' argument. Adjust.
4125 (struct target_ops) <to_wait>: Add `options' argument.
4126 (target_wait): Add `options' argument.
4127 * infrun.c (wait_for_inferior): Pass 0 as options to
4128 target_wait (blocking wait).
4129 (fetch_inferior_event): Pass TARGET_WNOHANG as options to
4131 * fork-child.c (startup_inferior): Pass 0 as options to
4132 target_wait (blocking wait).
4133 * linux-nat.c (linux_nat_create_inferior): Remove async masking.
4134 (linux_nat_wait_1): Add `target_options' argument. Use it instead
4135 of checking on target_can_async_p.
4136 (linux_nat_wait): Add `target_options' argument. Adjust.
4137 * remote.c (remote_wait_ns): Add `options' argument. Adjust to
4138 check on TARGET_WNOWAIT instead of checking on remote_is_async_p.
4139 (remote_wait_as): Add `options' argument. Adjust to check on
4140 TARGET_WNOWAIT instead of checking on remote_is_async_p. If doing
4141 a blocking wait, keep waiting until an interesting event comes
4143 (remote_wait): Add `options' argument. Don't loop here if the
4144 target is in async mode, and a blocking wait has been requested.
4146 * top.c (deprecated_target_wait_hook): Add `options' argument.
4147 * linux-thread-db.c (thread_db_wait): Add `options' argument, and
4148 pass it down to the layer beneath.
4149 * inf-ptrace.c (inf_ptrace_wait): Add `options' argument.
4150 * record.c (record_beneath_to_wait): Add `options' argument.
4151 (record_wait): Add `options' argument, and pass it down to the
4153 * bsd-uthread.c (bsd_uthread_wait): Add `options' argument.
4154 * darwin-nat.c (darwin_wait): Likewise.
4155 * defs.h (deprecated_target_wait_hook): Likewise.
4156 * gnu-nat.c (gnu_wait): Add `options' argument.
4157 * go32-nat.c (go32_wait): Likewise.
4158 * hpux-thread.c (hpux_thread_wait): Add `options' argument, and
4159 pass it down to the layer beneath.
4160 * inf-ttrace.c (inf_ttrace_wait): Add `options' argument.
4161 * monitor.c (monitor_wait): Likewise.
4162 * nto-procfs.c (procfs_wait): Likewise.
4163 * remote-mips.c (mips_wait): Add `options' argument.
4164 * remote-sim.c (gdbsim_wait): Likewise.
4165 * rs6000-nat.c (rs6000_wait): Add `options' argument.
4166 * sol-thread.c (sol_thread_wait): Add `options' argument, and pass
4167 it down to the layer beneath.
4168 * spu-linux-nat.c (spu_child_wait): Add `options' argument.
4169 * windows-nat.c (windows_wait): Likewise.
4170 * tui/tui-hooks.c (tui_target_wait_hook): Likewise. Adjust.
4172 2009-05-21 Pedro Alves <pedro@codesourcery.com>
4174 * mi/mi-interp.c (mi_on_resume): Account for whole process
4177 2009-05-21 Jan Kratochvil <jan.kratochvil@redhat.com>
4179 * m2-exp.y (MAX_FUNC): Fix trailing UNOP_MAX.
4181 2009-05-21 Jan Kratochvil <jan.kratochvil@redhat.com>
4183 * dwarf2read.c (set_cu_language): Recognize also DW_LANG_C99.
4185 2009-05-21 Jan Kratochvil <jan.kratochvil@redhat.com>
4187 Fix parsing DW_AT_const_value using DW_FORM_string.
4188 * dwarf2read.c (dwarf2_const_value <DW_FORM_string>): New.
4190 2009-05-20 Joel Brobecker <brobecker@adacore.com>
4192 * aix-thread.c (giter_count): Do not count the main thread.
4193 (giter_accum): Do not include the main thread.
4195 2009-05-19 Jan Kratochvil <jan.kratochvil@redhat.com>
4197 Remove the PROT parameter from openp.
4198 * source.c (openp): Remove the parameter PROT. Assertion check MODE.
4199 defs.h (openp): Update the prototype.
4200 Update all the openp callers.
4202 2009-05-19 Pedro Alves <pedro@codesourcery.com>
4204 * inflow.c (kill_command): Moved to infcmd.c.
4205 (_initialize_inflow): Don't add the "kill" command or clear
4207 * infcmd.c (kill_command): Moved here from inflow.c.
4208 (_initialize_infcmd): Add the "kill" command here.
4210 2009-05-19 Pedro Alves <pedro@codesourcery.com>
4212 * fork-child.c: Don't include frame.h. Include terminal.h.
4213 (fork_inferior): Call new_tty_postfork after forking adn adding
4214 the child to the inferior list.
4215 * inferior.h (new_tty_prefork, gdb_has_a_terminal): Don't declare
4217 * inflow.c (struct terminal_info): Remove const qualifier from
4218 `run_terminal' field.
4219 (inferior_thisrun_terminal): Tweak comment.
4220 (inflow_inferior_exit): Release the `run_terminal' field.
4221 (copy_terminal_info): New function.
4222 (new_tty_postfork): New function.
4223 * terminal.h (new_tty_prefork, new_tty, new_tty_postfork,
4224 (copy_terminal_info, gdb_has_a_terminal, gdb_setpgid): Declare.
4225 * inf-ptrace.c: Include terminal.h.
4226 (inf_ptrace_follow_fork): Copy the parent's terminal info to the
4228 * linux-nat.c: Include terminal.h.
4229 (linux_child_follow_fork): Copy the parent's terminal info to the
4231 * inf-ttrace.c: Include terminal.h.
4232 (inf_ttrace_follow_fork): Copy the parent's terminal info to the
4235 2009-05-19 Pedro Alves <pedro@codesourcery.com>
4237 * breakpoint.c (insert_breakpoints, breakpoint_init_inferior)
4238 (update_global_location_list): Use gdbarch_has_global_breakpoints
4239 instead of gdbarch_has_global_solist and
4240 target_supports_multi_process.
4241 * dicos-tdep.c (dicos_init_abi): Set
4242 gdbarch_has_global_breakpoints.
4243 * gdbarch.sh (has_global_solist): Update comment.
4244 (has_global_breakpoints): New.
4245 * remote.c (remote_start_remote): Use
4246 gdbarch_has_global_breakpoints instead of
4247 gdbarch_has_global_solist.
4248 * target.c (target_detach): Use gdbarch_has_global_breakpoints
4249 instead of gdbarch_has_global_solist.
4250 * infcmd.c (attach_command): Use gdbarch_has_global_solist instead
4251 of target_supports_multi_process.
4253 2009-05-18 Paul Pluzhnikov <ppluzhnikov@google.com>
4255 * objc-lang.c (find_methods): Plug a small memory leak.
4257 2009-05-18 Pedro Alves <pedro@codesourcery.com>
4259 * solib-svr4.c: Include observer.h.
4260 (debug_base, debug_loader_offset_p, debug_loader_offset)
4261 (debug_loader_name, main_lm_addr): Move these globals...
4262 (struct svr4_info): ... into this new structure.
4263 (svr4_info_p): New typedef.
4264 (svr4_info): New global.
4265 (get_svr4_info, remove_svr4_info, solib_svr4_inferior_exit): New
4267 (locate_base, solib_svr4_r_map, solib_svr4_r_brk)
4268 (solib_svr4_r_ldsomap): Add svr4_info argument. Adjust to
4270 (open_symbol_file_object): Adjust to per-inferior svr4.
4271 (svr4_default_sos, svr4_current_sos, svr4_fetch_objfile_link_map):
4273 (enable_break): Add svr4_info argument. Adjust to per-inferior
4275 (enable_break, svr4_solib_create_inferior_hook, svr4_clear_solib):
4276 Adjust to per-inferior svr4.
4277 (_initialize_svr4_solib): Install the solib_svr4_inferior_exit
4280 2009-05-18 Pedro Alves <pedro@codesourcery.com>
4282 * linux-nat.h (linux_proc_get_tgid): Declare.
4283 * linux-nat.c (linux_proc_get_tgid): New.
4284 * linux-thread-db.c (struct thread_db_info): New field
4285 `need_stale_parent_threads_check'.
4286 (add_thread_db_info): Set it.
4287 (find_new_threads_callback): Ignore stale fork parent threads.
4288 (thread_db_resume): New.
4289 (init_thread_db_ops): Install thread_db_resume.
4291 2009-05-18 Pedro Alves <pedro@codesourcery.com>
4293 * fork-child.c (fork_inferior): Only reset the thread list if this
4294 is the first inferior.
4295 (startup_inferior): If the target support multi-process, tell it
4296 to resume only the new process.
4297 * linux-nat.c (num_lwps): Delete global.
4298 (purge_lwp_list): New function.
4299 (num_lwps): New function.
4300 (add_lwp, delete_lwp): Adjust.
4302 (iterate_over_lwps): Add filter argument. Handle it.
4303 (linux_nat_attach): Remove FIXME note.
4304 (linux_nat_detach): Adjust to iterate over threads of the inferior
4305 we're detaching from. Adjust to num_lwps being a function. Don't
4306 assume the head of the lwp list is the main thread of the process
4307 we're detaching from. Don't destroy the LWP list.
4308 (resume_callback): Add debug output.
4309 (linux_nat_resume): Handle resuming a single inferior. Allow a
4310 wildcard resume in non-stop mode.
4311 (linux_handle_extended_wait): Don't assume inferior_ptid is the
4312 correct inferior of the parent LWP.
4313 (status_callback): Also check lp->waitstatus.
4314 (select_event_lwp): Add new filter parameter. Handle it.
4315 (linux_nat_filter_event): Adjust to num_lwps being a function.
4316 (linux_nat_wait_1): When adding the first lwp of the inferior, use
4317 an is_lwp check instead of checking for the number of lwps.
4318 (linux_nat_wait_1): Handle waiting for a specific tgid. Handle
4319 pending process exit statuses.
4320 (linux_nat_mourn_inferior): Don't destroy all the LWP info.
4321 Instead delete LWPs of the inferior that we're mourning. Don't
4322 unregister from the event loop here.
4323 (linux_nat_pid_to_str): Use `num_lwps'.
4324 (linux_nat_make_corefile_notes): Adjust to walk over lwps of a
4326 (linux_nat_is_async_p): Check if async was masked out.
4327 (linux_multi_process): New global.
4328 (linux_nat_supports_multi_process): New.
4329 (linux_nat_stop_lwp): Remove LWP filtering. It is done by the
4331 (linux_nat_stop): Adjust to make iterate_over_lwps itself do the
4333 (linux_nat_close): New.
4334 (linux_nat_add_target): Register linux_nat_close and
4335 linux_nat_supports_multi_process.
4336 * linux-nat.h (iterate_over_lwps): Add filter argument.
4337 * linux-thread-db.c (thread_db_handle): Delete.
4338 (proc_handle, thread_agent, td_init_p, td_ta_new_p)
4339 (td_ta_map_id2thr_p, td_ta_map_lwp2thr_p, td_ta_thr_iter_p)
4340 (td_ta_event_addr_p, td_ta_set_event_p, td_ta_event_getmsg_p)
4341 (td_thr_validate_p, td_thr_get_info_p, td_thr_event_enable_p)
4342 (td_thr_tls_get_addr_p, td_create_bp_addr, td_death_bp_addr): No
4343 longer globals, moved to...
4344 (struct thread_db_info): ... this new structure.
4345 (thread_db_list): New.
4346 (add_thread_db_info, get_thread_db_info, delete_thread_db_info):
4348 (have_threads_callback): Filter out threads of all inferiors but
4349 the one specified by the ARGS argument.
4350 (have_threads): Add ptid argument specifying the inferior we're
4351 interested in. Handle it.
4352 (struct thread_get_info_inout): New.
4353 (thread_get_info_callback, thread_from_lwp): Adjust to use it.
4354 (thread_db_attach_lwp): Check that inferior of the passed in
4355 thread is using thread-db. Adjust.
4356 (enable_thread_event): Remove thread_agent parameter. Instead,
4357 get it from the per-inferior thread-db info.
4358 (dladdr_to_soname): Move higher up.
4359 (enable_thread_event_reporting): Adjust to use per-inferior
4361 (try_thread_db_load_1): Replace `handle' parameter by a
4362 thread_db_info parameter. Adjust to use per-inferior thread-db
4364 (try_thread_db_load): Adjust to use per-inferior thread-db info.
4365 (thread_db_load, disable_thread_event_reporting): Ditto.
4366 (check_for_thread_db): Remove conditional reporting of which
4367 libthread_db is in use.
4368 (thread_db_new_objfile): Add comment about inferior_ptid.
4369 (attach_thread): Adjust to use per-inferior thread-db info.
4370 (thread_db_detach): Adjust to use per-inferior thread-db info.
4371 Remove thread event breakpoints of the current inferior. Only
4372 unpush the thread-db target if there are no more processes using
4374 (check_event): Adjust to use per-inferior thread-db info.
4375 (thread_db_wait): Adjust to use per-inferior thread-db info. Only
4376 unpush the thread-db target if there are no more processes using
4378 (thread_db_mourn_inferior): Adjust to use per-inferior thread-db
4379 info. Mark breakpoints of the current inferior out before
4380 deleting them. Only unpush the thread-db target if there are no
4381 more processes using it.
4382 (find_new_threads_callback): Adjust to use per-inferior thread_db
4384 (thread_db_find_new_threads_1): Add new ptid argument. Adjust to
4385 use per-inferior thread-db info.
4386 (thread_db_find_new_threads): Adjust to use per-inferior thread-db
4388 (thread_db_get_thread_local_address): Adjust.
4389 (thread_db_get_ada_task_ptid): Adjust.
4390 * inf-ptrace.c (inf_ptrace_mourn_inferior): Only unpush the target
4391 if there no more processes left to debug.
4392 * thread.c (set_running, set_executing): Handle resuming all
4393 threads of a single inferior.
4394 * mi/mi-interp.c (mi_output_running_pid): New.
4395 (mi_inferior_count): New.
4396 (mi_on_resume): For backwards compatibility, if resuming all
4397 threads of an inferior, and there is only one inferior, output
4400 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
4402 * ada-lang.c (ada_find_any_type): Move check for primitive types ...
4403 (to_fixed_range_type): ... to here.
4405 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
4407 * ada-lang.c (desc_data_type): Remove, replace by ...
4408 (desc_data_target_type): ... this.
4409 (thin_data_pntr): Use desc_data_target_type instead of desc_data_type.
4410 (ada_is_array_descriptor_type): Likewise.
4411 (ada_type_of_array): Likewise.
4412 (ada_coerce_to_simple_array_type): Likewise.
4413 (ada_array_element_type): Likewise.
4415 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
4417 * ada-valprint.c (ada_val_print_1): Use val_print_string to print
4418 result of ada_vax_float_print_function inferior call.
4420 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
4422 * ada-lang.c (ada_coerce_to_simple_array_type): Reimplement to
4423 avoid creating a dummy value.
4425 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
4427 * p-valprint.c (pascal_val_print): Use extract_typed_address
4428 to extract reference value.
4430 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
4432 * doublest.c (NAN): Remove unused define.
4433 (extract_floating_by_length, deprecated_extract_floating): Remove.
4434 (store_floating_by_length, deprecated_store_floating): Remove.
4435 (extract_typed_floating): Do not call extract_floating_by_length.
4436 (store_typed_floating): Do not call store_floating_by_length.
4437 (convert_typed_floating): Remove redundant assertions.
4438 * doublest.h (deprecated_extract_floating): Remove.
4439 (deprecated_store_floating): Remove.
4440 * sh64-tdep.c (sh64_register_convert_to_raw): Call
4441 extract_typed_floating instead of deprecated_extract_floating.
4443 2009-05-18 Jon Beniston <jon@beniston.com>
4445 * MAINTAINERS: Add lm32 target.
4446 * Makefile.in: Add lm32 dependencies.
4447 * NEWS: Indicate lm32 is a new target.
4448 * configure.tgt: Add lm32 targets.
4449 * lm32-tdep.c: New file.
4451 2009-05-18 Pedro Alves <pedro@codesourcery.com>
4453 * corelow.c (core_open): Flush the register cache before doing
4454 anything with registers.
4456 2009-05-18 Pedro Alves <pedro@codesourcery.com>
4458 * inflow.h (our_process_group): Remove declaration.
4459 (inferior_process_group): Delete global variable declaration.
4460 (inferior_process_group): New function declaration.
4461 * inflow.c: Include observer.h.
4462 (inferior_ttystate, our_ttystate, tflags_inferior, tflags_ours):
4464 (struct terminal_info): New struct.
4465 (our_terminal_info): New global.
4466 (inferior_process_group): New function.
4467 (inferior_thisrun_terminal): Extend description comment.
4468 (gdb_has_a_terminal): Adjust to write to our_terminal_info fields
4470 (terminal_init_inferior_with_pgrp): Adjust to per-inferior
4472 (terminal_inferior): Ditto.
4473 (terminal_ours_1): Ditto.
4474 (inflow_new_inferior, inflow_inferior_exit): New functions.
4475 (child_terminal_info): Adjust to per-inferior terminal settings.
4476 (osig_set): New global.
4477 (set_sigint_trap): Adjust to per-inferior terminal settings. Set
4478 or clear `osig_set' accordingly.
4479 (clear_sigint_trap): Check `osig_set' to decide wheater to restore
4480 SIGINT handler, instead of checking the current inferior (which
4482 (_initialize_inflow): Attach inflow_new_inferior and
4483 inflow_inferior_exit to the "new_inferior" and "inferior_exit"
4484 notifications, respectively.
4485 * inferior.h (struct terminal_info): Forward declare.
4486 (struct inferior): Add `terminal_info' field.
4487 * inferior.c (delete_inferior_1): Notify the inferior_exit
4488 observers before removing the inferior from the lists and deleting
4490 * inf-ptrace.c (inf_ptrace_stop): `inferior_process_group' is now
4491 a function instead of a variable. Adjust.
4492 * procfs.c (procfs_stop): Ditto.
4494 2009-05-17 Pedro Alves <pedro@codesourcery.com>
4496 * infrun.c (handle_inferior_event): When handling a
4497 TARGET_WAITKIND_FORKED, detach breakpoints from the fork child
4499 * linux-nat.c (linux_child_follow_fork): Only detach breakpoints
4500 from the child if vforking.
4501 * inf-ptrace.c (inf_ptrace_follow_fork): No need to detach
4502 breakpoints from the child here.
4504 2009-05-17 Pedro Alves <pedro@codesourcery.com>
4506 * infrun.c (pending_follow): Remove execd_pathname member.
4507 (resume): No longer handle TARGET_WAITKIND_EXECD pending follow.
4508 (handle_inferior_event): When handling a TARGET_WAITKIND_EXECD
4509 event, don't copy `execd_pathname' to pending_follow, use the
4510 event copy instead. Release `execd_pathname' once done with
4513 * infrun.c (pending_follow): Remove mention of exec events.
4515 2009-05-17 Hui Zhu <teawater@gmail.com>
4517 * i386-tdep.c (i386_process_record): Make it extern.
4518 (i386_gdbarch_init): Don't call set_gdbarch_process_record
4520 * i386-tdep.h (i386_process_record): Declare.
4521 * i386-linux-tdep.c (i386_linux_init_abi): Call
4522 set_gdbarch_process_record.
4524 2009-05-17 Vladimir Prus <vladimir@codesourcery.com>
4526 Always report varobj as changed when in_scope attribute changes.
4528 * varobj.c (install_new_value): If non-NULL-ness of value
4531 2009-05-15 Paul Pluzhnikov <ppluzhnikov@google.com>
4533 * NEWS: Mention set/show libthread-db-search-path.
4534 * gdb_thread_db.h (LIBTHREAD_DB_SEARCH_PATH): New define.
4535 (LIBTHREAD_DB_SO): Moved from linux-thread-db.c
4536 * linux-thread-db.c (libthread_db_search_path): New setting.
4537 (thread_db_handle): New variable (replaces using_thread_db).
4538 (try_thread_db_load_1): New function.
4539 (try_thread_db_load, thread_db_load_search): Likewise.
4540 (dladdr_to_soname): Likewise.
4541 (thread_db_load): Iterate over possibly multiple libthread_db's.
4542 (check_for_thread_db): Attempt to load new libthread_db.
4543 (thread_db_detach, thread_db_wait): Unload libthread_db.
4544 (thread_db_mourn_inferior): Likewise.
4545 (_initialize_thread_db): Add new libthread-db-search-path option.
4546 Defer loading of libthread_db to check_for_thread_db.
4547 * solib.c (libpthread_name_p): New function.
4548 (libpthread_solib_p): Call it.
4549 * solib.h (libpthread_name_p): New prototype.
4551 2009-05-15 Pierre Muller <muller@ics.u-strasbg.fr>
4553 * MAINTAINERS: Update my email address.
4555 2009-05-14 Paul Pluzhnikov <ppluzhnikov@google.com>
4557 * breakpoint.h: Add breakpoint_re_set_objfile prototype.
4558 * breakpoint.c (create_overlay_event_breakpoint): Renamed
4559 from create_overlay_event_breakpoint_1, old
4560 create_overlay_event_breakpoint deleted.
4561 (breakpoint_re_set_objfile): Don't rescan all objfiles
4563 (breakpoint_re_set): New function.
4564 * symfile.c (new_symfile_objfile): Call breakpoint_re_set_objfile
4565 instead of breakpoint_re_set.
4566 * objfiles.c (objfile_relocate): Likewise.
4568 2009-05-14 Joel Brobecker <brobecker@adacore.com>
4570 * gdbarch.sh: Add comment documenting the target_gdbarch global.
4571 gdbarch.h does NOT need to be regenerated as the corresponding
4572 change has already been made in a previous commit.
4574 2009-05-14 Pierre Muller <muller@ics.u-strasbg.fr>
4576 Remove all i386 debug register low level macros in config nm files.
4577 (I386_DR_LOW_SET_ADDR, I386_DR_LOW_RESET_ADDR): Remove.
4578 (I386_DR_LOW_GET_STATUS, I386_DR_LOW_SET_CONTROL): Remove.
4579 (I386_USE_GENERIC_WATCHPOIINTS): Remove.
4581 * i386-nat.h: New file (adapted from config/i386/nm-i386.h).
4582 (struct i386_dr_low_type): New type.
4583 (i386_dr_low): New global variable.
4584 * i386-nat.c (TARGET_HAS_DR_LEN_8): Update macro.
4585 (i386_insert_aligned_watchpoint): Replace i386 dr low macros by
4586 i386_dr_low struct variable fields.
4587 (i386_remove_aligned_watchpoint): Likewise.
4588 (i386_stopped_data_address): Likewise.
4589 (i386_stopped_by_hwbp): Likewise.
4590 (show_debug_regs_command_added): New static variable.
4591 (add_show_debug_regs_command): New static function.
4592 (i386_use_watchpoints): Call add_show_debug_regs_command if not done.
4593 (i386_set_debug_register_length): New function.
4594 (_initialize_i386_nat): Delete.
4596 * amd64-linux-nat.c: Include "i386-nat.h".
4597 (amd64_linux_dr_set_control): Change to static.
4598 (amd64_linux_dr_get_status): Change to static.
4599 (amd64_linux_dr_set_addr,amd64_linux_dr_reset_addr): Likewise.
4600 (_initialize_amd64_linux_nat): Set i386_dr_low variable fields.
4602 * go32-nat.c: Include "i386-nat.h".
4603 (go32_set_addr): Change to static.
4604 (go32_set_dr7): Change to static. Change arg type to unisgned long.
4605 (go32_get_dr6): Change to static. Change return type to unisnged long.
4606 (init_go32_ops): Set i386_dr_low variable fields.
4607 * i386-linux-nat.c: Include "i386-nat.h".
4608 (i386_linux_dr_set_control, i386_linux_dr_get_status): Change to static.
4609 (i386_linux_dr_set_addr, i386_linux_dr_reset_addr): Idem.
4610 (_initialize_i386_linux_nat): Set i386_dr_low variable fields.
4611 * i386bsd-nat.h: Declare functions used for
4612 i386_dr_low fields in i386fbsd-nat.c.
4613 * i386fbsd-nat.c: Include "i386-nat.h".
4614 (_initialize_i386fbsd_nat): Set i386_dr_low variable fields.
4615 * windows-nat.c: Include "i386-nat.h".
4616 (cygwin_set_dr, cygwin_get_dr6, cygwin_set_dr7): Add prototypes.
4618 (cygwin_get_dr6): Change return type to unisnged long.
4619 (cygwin_set_dr7): Change arg type to unisgned long.
4620 (init_windows_ops): Set i386_dr_low function fields.
4622 * amd64-windows-nat.c (_initialize_amd64_windows_nat): Call
4623 i386_set_debug_register_length.
4624 * i386-windows-nat.c (_initialize_i386_windows_nat): Likewise.
4626 * config/i386/nm-cygwin.h: Remove all I386_* macros.
4627 * config/i386/nm-cygwin64.h: Likewise.
4628 * config/i386/nm-fbsd.h: Likewise.
4629 * config/i386/nm-linux.h: Likewise.
4630 * config/i386/nm-i386.h: Remove completely.
4631 * config/i386/nm-go32.h: Remove completely.
4632 * config/i386/nm-linux64.h: Remove completely.
4633 * config/i386/go32.mh (NAT_FILE): Remove entry.
4634 * config/i386/linux64.h (NAT_FILE): Change to config/nm-linux.h.
4636 2009-05-14 Jon Beniston <jon@beniston.com>
4638 * MAINTAINERS: Add Jon Beniston to write after approval list.
4640 2009-05-13 Paul Pluzhnikov <ppluzhnikov@google.com>
4642 * objc-lang.c (objc_objfile_data): New variable.
4643 (find_methods): Skip objfiles without Obj-C methods.
4644 (_initialize_objc_lang): New function.
4646 2009-05-13 Joel Brobecker <brobecker@adacore.com>
4648 * c-lang.c (print_wchar): Remove unnecessary cast.
4650 2009-05-12 Jim Blandy <jimb@red-bean.com>
4652 * MAINTAINERS: Remove self as m32c target maintainer.
4654 2009-05-12 Pedro Alves <pedro@codesourcery.com>
4656 * cli/cli-decode.c (deprecated_add_set_cmd): Delete.
4657 * command.h (deprecated_add_set_cmd): Delete declaration.
4658 * gnu-nat.c (_initialize_gnu_nat): Replace 'maint gnu-debug' with
4659 'set debug gnu-nat' and 'show debug gnu-nat'.
4660 * i386-nat.c (_initialize_i386_nat): Replace 'maint
4661 show-debug-registers' with 'maint set show-debug-registers' and
4662 'maint show show-debug-registers'.
4663 * mips-linux-nat.c (_initialize_mips_linux_nat): Replace 'maint
4664 show-debug-registers' with 'maint set show-debug-registers' and
4665 'maint show show-debug-registers'.
4667 2009-05-12 Joel Brobecker <brobecker@adacore.com>
4669 * c-lang.c (print_wchar): Convert w into a gdb_wchar_t before
4670 pushing it on the output obstack.
4672 2009-05-11 Joel Brobecker <brobecker@adacore.com>
4674 Fix internal error on breaking at a multi-locations caller source line.
4675 * breakpoint.c (parse_breakpoint_sals): Set EXPLICIT_PC for the `break'
4676 command with no parameters.
4678 2009-05-11 Pedro Alves <pedro@codesourcery.com>
4680 * linux-nat.c (enum sigchld_state): Delete.
4681 (linux_nat_async_events_state): Delete.
4682 (struct waitpid_result): Delete.
4683 (waitpid_queue): Delete.
4684 (queued_waitpid_1): Delete.
4685 (async_file_flush): New.
4686 (queued_waitpid, push_waitpid): Delete.
4687 (async_file_mark): New.
4688 (drain_queued_events): Delete.
4689 (my_waitpid): Remove locally queued events handling.
4690 (linux_test_for_tracefork): Upjust.
4691 (linux_child_follow_fork): Ditto.
4692 (sync_sigchld_action): Delete.
4693 (blocked_mask): Reinstate.
4694 (async_sigchld_action): Rename to...
4695 (sigchld_action): ... this.
4696 (block_child_signals): New.
4697 (restore_child_signals_mask): New.
4698 (lin_lwp_attach_lwp): Adjust.
4699 (linux_nat_create_inferior): Ditto.
4700 (linux_nat_attach): Also use lp->status in async mode.
4701 (get_pending_status): Don't use queued_waitpid.
4702 (linux_nat_detach): Don't drain locally queued events.
4703 (linux_nat_resume): Allow pending wait statuses stored lp->status
4704 in async mode. If returning early due to a pending event,
4705 re-register the event source.
4706 (stop_wait_callback): Allow pending wait statuses stored
4707 lp->status in async mode.
4708 (pipe_to_local_event_queue, local_event_queue_to_pipe): Delete.
4709 (linux_nat_wait): Rename to ...
4710 (linux_nat_wait_1): ... this. Allow pending wait statuses stored
4711 lp->status in async mode. Always add WNOHANG to the waitpid
4712 options in async mode.
4713 (linux_nat_wait): New.
4714 (kill_callback): Don't drain locally queued events.
4715 (sigchld_handler): Rewrite.
4716 (linux_nat_is_async_p, linux_nat_can_async_p): Fix comments to
4717 refer to "set target-async".
4718 (linux_nat_async_mask): If in non-stop, and re-enabling async
4719 mode, re-register the target event source in the event loop.
4720 (linux_nat_event_pipe_pop, linux_nat_event_pipe_push)
4721 (get_pending_events, async_sigchld_handler)
4722 (linux_nat_async_events): Delete.
4723 (handle_target_event): New.
4724 (linux_nat_async_file_handler): Delete.
4725 (linux_async_pipe): New.
4726 (linux_nat_async): Only re-register in the event loop if not
4727 registered yet. Always notify the event-loop once if enabling the
4729 (linux_nat_stop_lwp): Rewrite to handle pending events stored in
4730 lp->status, not in the locally queued event list.
4731 (linux_nat_stop): Don't mask out async event handling.
4732 (linux_nat_setup_async): Delete.
4733 (_initialize_linux_nat): Adjust.
4734 (lin_thread_get_thread_signals): blocked_mask is global again.
4737 2009-05-11 Pierre Muller <muller@ics.u-strasbg.fr>
4739 Unify target macros.
4741 * target.h (STOPPED_BY_WATCHPOINT): Delete, replaced by ...
4742 (target_stoppped_by_watchpoint): New macro.
4743 (HAVE_STEPPABLE_WATCHPOINT): Delete, replaced by ...
4744 (target_have_steppable_watchpoint): New macro.
4745 (HAVE_CONTINUABLE_WATCHPOINT): Delete, replace by ...
4746 (target_have_continuable_watchpoint): New macro.
4747 (TARGET_CAN_USE_HARDWARE_WATCHPOINT):Delete, replaced by ...
4748 (target_can_use_hardware_watchpoint): New macro.
4749 (TARGET_REGION_OK_FOR_HW_WATCHPOINT):Delete, replaced by ...
4750 (target_region_ok_for_hw_watchpoint): New macro.
4752 * breakpoint.c (update_watchpoint): Use new macros.
4753 (bpstat_alloc): Likewise.
4754 (create_breakpoint): Likewise.
4755 (watch_command_1): Likewise.
4756 (can_use_hardware_watchpoint): Likewise.
4757 (do_enable_breakpoint): Likewise.
4758 * infrun.c (handle_inferior_event): Adapt to new macros.
4759 * mips-tdep.c (mips_gdbarch_init): Update comments.
4760 * procfs.c (procfs_set_watchpoint): Update comment.
4761 (procfs_insert_watchpoint): Adapt to new macros.
4762 * remote-m32r-sdi.c (m32r_stop):
4763 * remote-mips.c (mips_remove_breakpoint):
4764 * target.c (debug_to_region_ok_for_hw_watchpoint): Update to new macros.
4765 (debug_to_stopped_by_watchpoint): Likewise.
4768 2009-05-10 Pierre Muller <muller@ics.u-strasbg.fr>
4770 * src/gdb/target.h: Remove all tests for already defined
4771 macros. All macros defined here should not be set in config
4774 2009-05-08 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
4776 * ppc-linux-nat.c (have_ptrace_getsetregs): New variable.
4777 (have_ptrace_getsetfpregs): Likewise.
4778 fetch_all_gp_regs): New function.
4779 (fetch_gp_regs): New function.
4780 (fetch_all_fp_regs): Likewise.
4781 (fetch_fp_regs): New function.
4782 (fetch_ppc_registers): Using the new methods to fetch general-
4783 purpose and floating-pointer registers.
4784 (store_all_gp_regs): New function.
4785 (store_gp_regs): Likewise.
4786 (store_all_fp_regs): New function.
4787 (store_fp_regs): Likewise.
4788 (store_ppc_registers): Using the new methods to store general-
4789 purpose and floating-pointer registers.
4791 2009-05-08 Doug Evans <dje@google.com>
4793 * linux-nat.c (linux_xfer_siginfo): Delete unused locals lp, n.
4795 2009-05-07 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
4797 * MAINTAINERS (Write After Approval): Add self.
4799 2009-05-07 Joel Brobecker <brobecker@adacore.com>
4801 * gdbarch.h (target_gdbarch): Add comment documenting this global.
4803 2009-05-06 Joel Brobecker <brobecker@adacore.com>
4805 * acinclude.m4 (AM_ICONV): Prefer in-tree libiconv if present over
4807 * configure: Regenerate.
4809 2009-05-06 Joel Brobecker <brobecker@adacore.com>
4811 * utils.c: Add include of gdb_usleep.h.
4812 (defaulted_query): Detect false EOF conditions that happen
4813 on terminals opened with the O_NONBLOCK flag when there is
4816 2009-05-06 Pedro Alves <pedro@codesourcery.com>
4818 * inferior.c (add_inferior): Move observer_notify_new_inferior
4820 (add_inferior_silent): ... here.
4822 2009-05-06 Pierre Muller <muller@ics.u-strasbg.fr>
4823 Pedro Alves <pedro@codesourcery.com>
4825 * procfs.c (procfs_insert_watchpoint, procfs_remove_watchpoint)
4826 (procfs_region_ok_for_hw_watchpoint, procfs_use_watchpoints): New
4828 (procfs_stopped_by_watchpoint): Made static, ptid argument
4830 (_initialize_procfs): Register new watchpoint related target
4832 * config/i386/nm-i386sol2.h (TARGET_CAN_USE_HARDWARE_WATCHPOINT)
4833 (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT, STOPPED_BY_WATCHPOINT)
4834 (HAVE_CONTINUABLE_WATCHPOINT): Delete.
4835 (target_insert_watchpoint, target_remove_watchpoint): Delete.
4836 (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete
4838 * config/mips/nm-irix5.h (STOPPED_BY_WATCHPOINT)
4839 (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT): Delete.
4840 (target_insert_watchpoint, target_remove_watchpoint): Delete.
4841 (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete
4843 * config/sparc/nm-sol2.h (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT)
4844 (HAVE_CONTINUABLE_WATCHPOINT, STOPPED_BY_WATCHPOINT): Delete.
4845 (target_insert_watchpoint, target_remove_watchpoint): Delete.
4846 (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete
4849 2009-05-06 Hui Zhu <teawater@gmail.com>
4851 * i386-tdep.c (i386_process_record): Change bzero to memset.
4853 2009-05-06 Hui Zhu <teawater@gmail.com>
4855 * NEWS: Add item for process record and replay.
4857 2009-05-05 Maxim Grigoriev <maxim2405@gmail.com>
4859 * xtensa-tdep.c (xtensa_frame_cache): Use pc instead of cache->pc.
4861 2009-05-05 Ulrich Weigand <uweigand@de.ibm.com>
4863 * inferior.h (read_pc, write_pc): Remove.
4864 * regcache.c (read_pc, write_pc): Remove.
4866 * infrun.c (displaced_step_fixup): Use regcache_read_pc instead
4868 (handle_inferior_event): Use regcache_read_pc instead of read_pc
4869 when determining value of stop_pc. Replace subsequent uses of
4870 read_pc by inspecting already-retrieved stop_pc value.
4871 (keep_going): Use regcache_read_pc instead of read_pc.
4873 * breakpoint.c (watchpoint_check): Use current frame architecture
4874 and PC instead of current_gdbarch and read_pc ().
4875 * tracepoint.c (set_traceframe_context): Replace PC argument
4876 with FRAME argument.
4877 (trace_start_command, finish_tfind_command): Update calls.
4878 (finish_tfind_command): Compare frame IDs to identify transitions
4880 (trace_find_pc_command): Use regcache_read_pc instead of read_pc.
4881 * rs6000-nat.c (exec_one_dummy_insn): Pass in regcache instead
4882 of gdbarch. Use regcache_read_pc and regcache_write_pc instead
4883 of read_pc and write_pc.
4884 (store_register): Make regcache argument non-const. Update call
4885 to exec_one_dummy_insn.
4887 * thread.c (switch_to_thread): Use regcache_read_pc instead of read_pc.
4888 * infcmd.c (post_create_inferior): Likewise.
4889 * solib-darwin.c (darwin_solib_create_inferior_hook): Likewise.
4890 * solib-pa64.c (pa64_solib_create_inferior_hook): Likewise.
4891 * solib-sunos.c (sunos_solib_create_inferior_hook): Likewise.
4892 * solib-svr4.c (enable_break, svr4_relocate_main_executable): Likewise.
4893 * linux-fork.c (fork_load_infrun_state): Likewise.
4894 * hppa-hpux-tdep.c (hppa_hpux_push_dummy_code): Likewise.
4895 * record.c (record_wait): Likewise.
4896 * procfs.c (procfs_wait): Likewise.
4897 * remote-mips.c (common_open, mips_wait): Likewise.
4898 * remote-m32r-sdi.c (m32r_resume): Likewise.
4900 * symfile.c (generic_load): Use regcache_write_pc instead of write_pc.
4901 * monitor.c (monitor_create_inferior, monitor_load): Likewise.
4902 * m32r-rom.c (m32r_load, m32r_upload_command): Likewise.
4903 * remote-m32r-sdi.c (m32r_create_inferior, m32r_load): Likewise.
4904 * remote-mips.c (mips_create_inferior, mips_load): Likewise.
4906 * solib-darwin.c: Include "regcache.h".
4907 * solib-pa64.c: Include "regcache.h".
4908 * solib-svr4.c: Include "regcache.h.".
4910 * symfile.c: Do not mention read_pc or write_pc in comments.
4911 * dink32-rom.c: Likewise.
4912 * m32r-rom.c: Likewise.
4913 * mips-tdep.c: Likewise.
4915 2009-05-05 Ulrich Weigand <uweigand@de.ibm.com>
4917 * fork-child.c (startup_inferior): Move setting stop_pc ...
4918 * infcmd.c (post_create_inferior): ... to here.
4920 2009-05-04 Michael Snyder <msnyder@vmware.com>
4922 * NEWS: Add item for reverse debugging commands.
4924 2009-05-04 Pedro Alves <pedro@codesourcery.com>
4926 * go32-nat.c (go32_stop): Delete.
4927 (go32_kill_inferior): Rewrite to only call go32_mourn_inferior.
4928 (go32_create_inferior): Don't call go32_stop or
4930 (go32_mourn_inferior): Inline go32_stop and go32_kill_inferior
4932 (init_go32_ops): Don't register go32_stop.
4934 2009-05-02 Eli Zaretskii <eliz@gnu.org>
4936 * dbxread.c (read_dbx_symtab): Avoid compiler warnings for
4939 * infcall.c (find_function_addr): Avoid compiler warnings for
4942 2009-05-01 Jan Kratochvil <jan.kratochvil@redhat.com>
4944 * dictionary.c (dict_hashed_vector, dict_hashed_expandable_vector)
4945 (dict_linear_vector, dict_linear_expandable_vector): Fix a comment typo.
4947 2009-05-01 Doug Evans <dje@google.com>
4949 * linux-thread-db.c (thread_db_pid_to_str): Delete unused assignment
4952 2009-05-01 Eli Zaretskii <eliz@gnu.org>
4954 * record.c (_initialize_record): Reformat and clarify doc strings
4955 for stop-at-limit and insn-number-max.
4957 * go32-nat.c: Add comments about dirty secrets of DJGPP debugging.
4959 2009-05-01 Jan Kratochvil <jan.kratochvil@redhat.com>
4961 Make specifiable the make_function_type type memory ownership.
4962 * gdbtypes.c (make_function_type): New parameter `objfile', use it
4963 explicitely instead of TYPE-initialized removed local variable
4964 `objfile'. Describe `objfile' it in the function comment.
4965 (lookup_function_type): Update make_function_type callers.
4966 * gdbtypes.h (make_function_type): Update the prototype.
4967 * jv-lang.c (java_link_class_type): Update make_function_type callers.
4968 * dwarf2read.c (read_subroutine_type): Likewise.
4969 * stabsread.c (read_type): Likewise.
4971 2009-05-01 Eli Zaretskii <eliz@gnu.org>
4973 * go32-nat.c (go32_pid_to_str): Call normal_pid_to_str instead of
4974 printing a bogus "Thread <main>".
4975 (go32_thread_alive): Don't return 1 for null_ptid.
4977 * i386-tdep.c (i386_go32_init_abi): Override the number of
4978 registers due to non-support of SSE.
4980 2009-04-30 Anthony Green <green@moxielogic.com>
4982 * configure.tgt: Link the moxie simulator in with gdb.
4984 2009-04-30 Paul Pluzhnikov <ppluzhnikov@google.com>
4986 * elfread.c (elf_symtab_read): Don't assume .data and .rodata
4989 2009-04-30 Hui Zhu <teawater@gmail.com>
4990 Michael Snyder <msnyder@vmware.com>
4992 I386 Linux process record and replay support.
4994 * i386-linux-tdep.c (i386_linux_record_tdep): New variable.
4995 This struct has the argument for the function
4996 "record_linux_system_call".
4997 (i386_linux_intx80_sysenter_record): New function. Parse the
4998 system call instruction and call function
4999 "record_linux_system_call" to record execute log.
5000 (i386_linux_init_abi): Initialize "i386_linux_record_tdep".
5001 Set "i386_linux_intx80_sysenter_record" to
5002 "i386_intx80_record" and "i386_sysenter_record".
5004 2009-04-30 Hui Zhu <teawater@gmail.com>
5005 Michael Snyder <msnyder@vmware.com>
5007 I386 architecture process record and replay support.
5009 * i386-tdep.c (PREFIX_REPZ, PREFIX_REPNZ, PREFIX_LOCK,
5010 PREFIX_DATA, PREFIX_ADDR): New macros. Help decode the i386
5012 (aflag, dflag, override, modrm, mod, reg, rm, ot,
5013 i386_record_pc): New variables. Ditto.
5014 (i386_record_modrm, i386_record_lea_modrm_addr,
5015 i386_record_lea_modrm): New functions. Ditto.
5016 (i386_process_record): New function. Parse the instruction in
5017 address "addr" and record the values of registers and memory
5018 that will be changed by this instruction.
5019 (i386_gdbarch_init): Set "i386_process_record" to GDBARCH
5020 "process_record" interface.
5021 * i386-tdep.h (gdbarch_tdep): New function pointers
5022 "i386_intx80_record" and "i386_sysenter_record" that point to
5023 the function that can record "intx80" and "sysenter" execute
5026 2009-04-30 Hui Zhu <teawater@gmail.com>
5027 Michael Snyder <msnyder@vmware.com>
5029 * infrun.c (use_displaced_stepping): Return false if process
5030 record and replay target is used.
5031 (proceed): Call function "record_not_record_set" if pocess
5032 record and replay target is used.
5034 2009-04-30 Hui Zhu <teawater@gmail.com>
5035 Michael Snyder <msnyder@vmware.com>
5037 Linux process record and replay support.
5039 * Makefile.in (ALLDEPFILES): Add linux-record.c.
5040 (ALL_TARGET_OBS): Add linux-record.o.
5041 * configure.tgt (x86_64-*-linux*): Add linux-record.o.
5042 (i[34567]86-*-linux*): Add linux-record.o.
5043 * linux-record.c, linux-record.h: New file.
5045 2009-04-30 Hui Zhu <teawater@gmail.com>
5046 Michael Snyder <msnyder@vmware.com>
5048 Process record and replay target.
5050 * Makefile.in (SFILES): Add record.c.
5051 (COMMON_OBS): Add record.o.
5052 * record.c, record.h: New file.
5054 2009-04-30 Hui Zhu <teawater@gmail.com>
5055 Michael Snyder <msnyder@vmware.com>
5057 * target.h (strata): New stratum "record_stratum".
5059 2009-04-30 Hui Zhu <teawater@gmail.com>
5060 Michael Snyder <msnyder@vmware.com>
5062 GDBARCH interface for process record and replay.
5064 * gdbarch.sh (process_record): This interface point to the
5065 function that records the inferior execute log.
5067 2009-04-29 Doug Evans <dje@google.com>
5069 * i386-nat.c (child_post_startup_inferior): Delete, unused.
5071 2009-04-29 Pedro Alves <pedro@codesourcery.com>
5073 * breakpoint.c (print_exception_catchpoint): Access `b' directly
5074 instead of `b->loc->owner'.
5075 (print_mention_exception_catchpoint): Ditto.
5077 2009-04-29 Jan Kratochvil <jan.kratochvil@redhat.com>
5079 * macrocmd.c (info_macro_command): Print -Dname=value if LINE is zero.
5081 2009-04-27 Tom Tromey <tromey@redhat.com>
5083 * c-exp.y (yylex): Handle '[' and ']' like '(' and ')'.
5085 2009-04-27 Jerome Guitton <guitton@adacore.com>
5087 * symtab.c (append_exact_match_to_sals): New function, extracted
5088 from expand_line_sal.
5089 (expand_line_sal): Use append_exact_match_to_sals to append exact
5090 matches. If none found, append all best items.
5092 2009-04-27 Jerome Guitton <guitton@adacore.com>
5094 * main.c (captured_main): Move gdbinit lookups after gdb_init.
5096 2009-04-27 Jan Kratochvil <jan.kratochvil@redhat.com>
5099 * dwarf2read.c (unsigned_int_compar, inherit_abstract_dies): New.
5100 (read_func_scope): Call inherit_abstract_dies.
5102 2009-04-25 Eli Zaretskii <eliz@gnu.org>
5104 * Makefile.in (ALLDEPFILES): Remove duplicate entries for
5105 sparc-sol2-nat.c and sparc-sol2-tdep.c.
5107 * stack.c (_initialize_stack) <disassemble-next-line>: Doc fix.
5109 2009-04-24 Pierre Muller <muller@ics.u-strasbg.fr>
5111 ARI change: Use "/* ARI: rule */" pattern.
5112 * utils.c: Update ARI patterns.
5113 * gdb_dirent.h: Likewise.
5115 2009-04-23 Anthony Green <green@moxielogic.com>
5117 * MAINTAINERS: Add moxie target.
5118 * configure.tgt: Add moxie-*-elf target.
5119 * moxie-tdep.c: New file.
5120 * moxie-tdep.h: New file.
5122 2009-04-23 Joel Brobecker <brobecker@adacore.com>
5124 * ada-lang.c: Remove an extra empty line. No code change.
5126 2009-04-23 Jan Kratochvil <jan.kratochvil@redhat.com>
5128 Fix double free on error inserting the breakpoint instruction.
5129 * breakpoint.c (create_breakpoints): Move the
5130 update_global_location_list call to ...
5131 (break_command_really): ... here together with the second local call
5132 both unified after all the cleanups.
5134 2009-04-23 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
5135 Tom Tromey <tromey@redhat.com>
5137 * configure, config.in: Regenerate.
5138 * configure.ac: Support for relocatable GDB datadir. Use
5139 GDB_AC_WITH_DIR. Always define TARGET_SYSTEM_ROOT_RELOCATABLE.
5140 * acinclude.m4 (GDB_AC_WITH_DIR): New defun.
5141 * top.c (init_main): Add "set data-directory".
5142 * defs.h (gdb_datadir): Declare.
5143 * main.c (gdb_datadir): New global.
5144 (captured_main): Initialize gdb_datadir. Use relocate_directory.
5145 (relocate_path): New function.
5146 (relocate_directory): Likewise.
5147 (get_init_files): Use relocate_path.
5148 (README): Mention --with-gdb-datadir.
5150 2009-04-23 Joel Brobecker <brobecker@adacore.com>
5152 * ada-tasks (task_command_1): Call target_find_new_threads.
5154 2009-04-23 Joel Brobecker <brobecker@adacore.com>
5156 * stack.c (do_gdb_disassembly): Print the exception message if an
5157 error was thrown while trying to perform the disassembly.
5159 2009-04-22 Jan Kratochvil <jan.kratochvil@redhat.com>
5161 * varobj.c (free_variable): Replace free_current_contents by xfree.
5163 2009-04-22 Kazu Hirata <kazu@codesourcery.com>
5165 * arm-linux-nat.c (fetch_register, store_register): Use
5166 ARM_CPSR_GREGNUM instead of ARM_CPSR_REGNUM.
5167 * arm-linux-tdep.c (arm_linux_supply_gregset,
5168 arm_linux_collect_gregset): Likewise.
5169 * arm-linux-tdep.h (ARM_CPSR_GREGNUM): New.
5170 * arm-tdep.h (ARM_CPSR_REGNUM): Remove.
5172 2009-04-22 Hui Zhu <teawater@gmail.com>
5174 * stack.c (_initialize_stack): Set the default of
5175 disassemble-next-line to off.
5177 2009-04-21 Tom Tromey <tromey@redhat.com>
5179 * acinclude.m4: Use AS_HELP_STRING, not AC_HELP_STRING.
5180 * configure.ac: Use AS_HELP_STRING, not AC_HELP_STRING.
5182 2009-04-21 Andreas Schwab <schwab@linux-m68k.org>
5184 * configure.ac: Add quotes to not lose brackets in help text.
5185 * configure: Rebuild.
5187 2009-04-21 Andreas Schwab <schwab@linux-m68k.org>
5189 * configure.ac: Don't postprocess Makefile in config.status.
5190 Substitute GDB_NM_FILE. Don't substitute nm_h.
5191 * Makefile.in (GDB_NM_FILE): Substitute.
5192 (TAGS): Use $(GDB_NM_FILE) instead of $(NAT_FILE).
5193 * configure: Regenerate.
5194 * gnulib/Makefile.in: Regenerate.
5196 2009-04-21 Joseph Myers <joseph@codesourcery.com>
5198 * configure.ac (--with-datarootdir, --with-docdir, --with-pdfdir,
5199 --with-htmldir): New.
5200 * configure: Regenerate.
5202 2009-04-21 Tom Tromey <tromey@redhat.com>
5204 * configure: Rebuild.
5205 * configure.ac: Use lower case for start of help strings. Clean
5206 up --with-sysroot help.
5208 2009-04-21 Tom Tromey <tromey@redhat.com>
5210 * configure: Rebuild.
5211 * acinclude.m4 (AM_ICONV): Use AC_HELP_STRING.
5212 * configure.ac: Use AC_HELP_STRING. Use upper case for variables
5215 2009-04-21 Pierre Muller <muller@ics.u-strasbg.fr>
5217 ARI fix: remove "%p".
5218 * ia64-tdep.c (ia64_frame_this_id): Use host_address_to_string function.
5219 (ia64_sigtramp_frame_this_id): Ditto.
5220 (ia64_libunwind_frame_this_id): Ditto.
5221 (ia64_libunwind_sigtramp_frame_this_id): Ditto.
5222 * symmisc.c (maintenance_info_psymtabs): Ditto.
5224 2009-04-21 Joseph Myers <joseph@codesourcery.com>
5226 * configure.ac (--with-relocated-sources): New.
5227 * configure, config.in: Regenerate.
5228 * source.c (add_substitute_path_rule): Remove static.
5229 * source.h (add_substitute_path_rule): Declare.
5230 * main.c: Include "source.h".
5231 (captured_main): Add substitution rule if RELOC_SRCDIR.
5233 2009-04-21 Pierre Muller <muller@ics.u-strasbg.fr>
5235 * gnu-nat.h (proc_debug): Add missing continuation line in macro.
5237 2009-04-20 David Daney <ddaney@caviumnetworks.com>
5239 * NEWS: Mention MIPS/Linux hardware watchpoint support.
5241 2009-04-20 David Daney <ddaney@caviumnetworks.com>
5243 * mips-linux-nat.c (command.h, gdbcmd.h, gdb_assert.h): New #includes.
5244 (maint_show_dr, super_close): New variables.
5245 (super_fetch_registers, super_store_registers): Make static.
5246 (PTRACE_GET_WATCH_REGS, PTRACE_SET_WATCH_REGS, W_BIT, R_BIT, I_BIT)
5247 (W_MASK, R_MASK, I_MASK, IRW_MASK, MAX_DEBUG_REGISTER): Define.
5248 (pt_watch_style): Define new enum.
5249 (mips32_watch_regs, mips64_watch_regs, pt_watch_regs, mips_watchpoint):
5251 (watch_readback_valid, watch_readback, current_watches, watch_mirror):
5253 (get_irw_mask, get_reg_mask, get_num_valid, get_watchlo)
5254 (set_watchlo, get_watchhi, set_watchhi, mips_show_dr)
5255 (mips_linux_read_watch_registers, mips_linux_can_use_hw_breakpoint)
5256 (mips_linux_stopped_by_watchpoint, mips_linux_stopped_data_address)
5257 (type_to_irw, fill_mask, try_one_watch)
5258 (mips_linux_region_ok_for_hw_watchpoint, write_watchpoint_regs)
5259 (mips_linux_new_thread, populate_regs_from_watches)
5260 (mips_linux_insert_watchpoint, mips_linux_remove_watchpoint)
5261 (mips_linux_close): New functions.
5262 (_initialize_mips_linux_nat): Register watchpoint functions with
5263 the target_ops. Add show-debug-regs maintenance command.
5265 2009-04-20 David Daney <ddaney@caviumnetworks.com>
5267 * infrun.c (handle_inferior_event): Move gegisters_changed call down.
5269 2009-04-19 Pedro Alves <pedro@codesourcery.com>
5271 * NEWS: Mention gdbserver support for x86 Windows CE.
5273 2009-04-19 Eli Zaretskii <eliz@gnu.org>
5275 * config/djgpp/fnchange.lst: Fix typos.
5277 Set default host and target charsets in the DJGPP port.
5279 * config/djgpp/config.sed (am_cv_langinfo_codeset)
5280 (bash_cv_langinfo_codeset, ac_cv_header_nl_types_h): Set to "yes"
5281 in all configure scripts that define ac_cv_env_CPP_value.
5283 * go32-nat.c (dos_codepage, nl_langinfo): New functions.
5286 * config/djgpp/nl_types.h: New file.
5288 * config/djgpp/langinfo.h: New file.
5290 * config/i386/go32.mh (MH_CFLAGS): Add $(srcdir)/config/djgpp.
5292 2009-04-18 Carlos O'Donell <carlos@codesourcery.com>
5294 * Makefile.in (MAKEHTML): Set to makeinfo --html.
5295 (MAKEHTMLFLAGS): Set to empty.
5297 2009-04-18 Eli Zaretskii <eliz@gnu.org>
5299 * NEWS: Mention all new set/show commands added since GDB 6.8 was
5302 * go32-nat.c (go32_sysinfo): Check if the call to
5303 __dpmi_get_capabilities fills the buffer with information, and
5304 don't use the buffer if not.
5306 2009-04-17 Tom Tromey <tromey@redhat.com>
5308 * charset.c (_initialize_charset): Add special case for "646".
5310 2009-04-17 Carlos O'Donell <carlos@codesourcery.com>
5312 * configure.ac: AC_SUBST datarootdir, docdir, htmldir, pdfdir.
5313 * configure: Regenerate.
5314 * Makefile.in: Set datarootdir, docdir, htmldir, and pdfdir from
5315 configure substitutions.
5316 (FLAGS_TO_PASS): Add datarootdir, docdir, and htmldir.
5318 2009-04-17 Pierre Muller <muller@ics.u-strasbg.fr>
5320 ARI fix: Do not use %p, replace by call to host_address_to_string
5322 * darwin-nat.c (darwin_xfer_partial): Apply change.
5323 * gnu-nat.c (inf_continue, gnu_xfer_memory): Ditto.
5324 * gnu-nat.h (proc_debug): Ditto.
5325 * symmisc.c (maintenance_info_symtabs): Ditto.
5326 (maintenance_info_psymtabs): Ditto.
5327 * windows-nat.c (handle_load_dll): Ditto.
5328 (handle_unload_dll, info_w32_command, handle_exception): Ditto.
5329 * xtensa-tdep.c (xtensa_unwind_pc): Ditto.
5331 2009-04-17 Joseph Myers <joseph@codesourcery.com>
5333 * configure.tgt (i[34567]86-*-linux*): Use 64-bit configuration if
5334 --enable-64-bit-bfd.
5335 (sparc-*-linux*): Likewise.
5337 2009-04-17 Eli Zaretskii <eliz@gnu.org>
5339 * go32-nat.c (go32_sysinfo): Update list of Windows versions of
5342 2009-04-16 Pedro Alves <pedro@codesourcery.com>
5344 * remote.c (remote_query_attached): Fix pasto in packet_ok result
5347 2009-04-16 Joel Brobecker <brobecker@adacore.com>
5349 * procfs.c (solib_mappings_callback, find_memory_regions_callback):
5350 Revert the previous change. Might not be correct, actually.
5352 2009-04-16 Joel Brobecker <brobecker@adacore.com>
5354 * ada-lang.h (ada_adjust_exception_stop, ada_print_exception_stop)
5355 (ada_get_current_task, ada_print_exception_breakpoint_nontask)
5356 (ada_print_exception_breakpoint_task, ada_reset_thread_registers):
5357 Remove declaration. These are non-existent functions.
5359 2009-04-16 Joel Brobecker <brobecker@adacore.com>
5361 * procfs.c (solib_mappings_callback, find_memory_regions_callback):
5362 Fix a compilation warning on mips-irix due to casting from
5363 a pointer of different size.
5365 2009-04-16 Joel Brobecker <brobecker@adacore.com>
5367 * ada-lang.c (symtab_for_sym): Delete.
5368 (user_select_syms): Use sym->symtab instead of calling symtab_for_sym.
5370 2009-04-16 Joel Brobecker <brobecker@adacore.com>
5372 * ada-lang.c (extract_string): Delete.
5373 (ada_main_name): Reimplement using target_read_string instead of
5376 2009-04-16 Andreas Schwab <schwab@linux-m68k.org>
5378 * m68klinux-nat.c: Remove obsolete comment.
5379 (fetch_register, store_register): Don't call
5380 gdbarch_cannot_fetch_register or gdbarch_cannot_store_register,
5381 which are always nops here.
5383 2009-04-14 Tom Tromey <tromey@redhat.com>
5385 * c-lang.c (c_emit_char): Use INTERMEDIATE_ENCODING.
5386 (c_printstr): Likewise.
5387 * charset.c: Include gdb_wait.h.
5388 (make_wchar_iterator): Use INTERMEDIATE_ENCODING.
5389 (find_charset_names): Use pexecute. Handle libiconv's output.
5391 (_initialize_charset): Use xstrdup.
5392 * gdb_wchar.h: Check HAVE_BTOWC. Split PHONY_ICONV and wchar
5394 (INTERMEDIATE_ENCODING): New define.
5395 * configure, config.in: Rebuild.
5396 * configure.ac: Check for btowc.
5398 2009-04-15 Tom Tromey <tromey@redhat.com>
5400 * c-lang.c (evaluate_subexp_c): Correctly handle EVAL_SKIP.
5402 2009-04-15 Eli Zaretskii <eliz@gnu.org>
5404 * utils.c (parse_escape): Initialize target_char to pacify GCC.
5406 2009-04-14 Jan Kratochvil <jan.kratochvil@redhat.com>
5408 * c-lang.c (c_get_string): Fix xfree crash on a failed string read.
5410 2009-04-14 Pierre Muller <muller@ics.u-strasbg.fr>
5412 ARI fix: sprintf rule.
5413 * ada-exp.y (convert_char_literal): Replace sprintf by xsnprintf.
5414 * ada-lang.c (add_angle_brackets): Use xstrprintf.
5415 (ada_decode): Replace sprintf by xsnprintf.
5416 (find_old_style_renaming_symbol): Ditto.
5417 (ada_to_fixed_type_1, ada_enum_name): Ditto.
5420 2009-04-14 Joel Brobecker <brobecker@adacore.com>
5422 * target.c (target_mourn_inferior): Call bfd_cache_close_all
5423 after having executed the target mourn_inferior routine.
5425 2009-04-14 Eli Zaretskii <eliz@gnu.org>
5427 * config/djgpp/djconfig.sh (DEPDIR): Define to "_deps", if
5430 2009-04-13 David Daney <ddaney@caviumnetworks.com>
5432 * infrun.c (maybe_software_singlestep): New function.
5433 (resume): Call maybe_software_singlestep.
5434 (handle_inferior_event): Same.
5436 2009-04-13 Tom Tromey <tromey@redhat.com>
5438 * python/python-frame.c (frapy_richcompare): Return
5439 Py_NotImplemented, not an error. Handle Py_NE as well.
5441 2009-04-13 Eli Zaretskii <eliz@gnu.org>
5443 * charset.c (EILSEQ): Define if not defined by system headers.
5445 2009-04-11 Eli Zaretskii <eliz@gnu.org>
5447 * config/djgpp/config.sed: Tweak ac_config_files in intl/configure
5448 to be consistent with renaming config.intl.in into config_intl.in.
5450 * go32-nat.c (go32_attach, go32_detach): Fix prototypes to be
5451 consistent with the change from 2008-11-09.
5453 2009-04-10 Jan Kratochvil <jan.kratochvil@redhat.com>
5455 * gdbtypes.c: Remove excessive parentheses at the return keywords.
5456 * varobj.c (varobj_invalidate): Fix indentation.
5457 * varobj.c (varobj_invalidate): Fix formatting text width.
5459 2009-04-08 Vladimir Prus <vladimir@codesourcery.com>
5461 Implement -exec-jump.
5463 * mi/mi-cmds.h (mi_cmd_exec_jump): Declare.
5464 * mi/mi-main.c (mi_cmd_exec_jump): New.
5465 * mi/mi-cmds.c (mi_cmds): Register exec-jump.
5467 2009-04-07 Doug Evans <dje@google.com>
5469 * symfile.c (symbol_file_clear): Fix indentation.
5471 2009-04-06 Mark Kettenis <kettenis@gnu.org>
5473 * sparc64nbsd-nat.c (sparc64nbsd_supply_pcb): Fix comment.
5475 2009-04-03 Ulrich Weigand <uweigand@de.ibm.com>
5477 * ppc-linux-nat.c (ppc_linux_target_wordsize): New function.
5478 (ppc_linux_auxv_parse): New function.
5479 (ppc_linux_read_description): Use ppc_linux_target_wordsize.
5480 (_initialize_ppc_linux_nat): Install ppc_linux_auxv_parse.
5482 2009-04-03 Ulrich Weigand <uweigand@de.ibm.com>
5484 * spu-linux-nat.c (spu_bfd_open): Set filename of in-memory
5485 BFD to contents of SPU name note.
5486 (spu_symbol_file_add_from_memory): Call symbol_file_add_from_bfd
5487 with "from_tty" argument 1 instead of 0.
5489 2009-04-02 Jan Kratochvil <jan.kratochvil@redhat.com>
5492 (new_symbol <DW_TAG_variable> <!DW_AT_location> <DW_AT_external>):
5493 Create the symbol in local scope.
5494 * symtab.h (cu->list_in_scope <LOC_UNRESOLVED>): New comment part.
5496 2009-04-02 Keith Seitz <keiths@redhat.com>
5498 * stabsread.c (read_member_functions): GCC may emit an extra space
5499 at the end of the names "__base_ctor" and "__base_dtor"; so ignore
5500 whitespace when looking for these functions.
5502 2009-04-01 Joel Brobecker <brobecker@adacore.com>
5504 Change the default value for "set print frame-arguments" to scalars.
5506 * stack.c (print_frame_arguments): Set initial value to "scalars".
5508 2009-04-01 Aleksandar Ristovski <aristovski@qnx.com>
5510 * mips-tdep.c (mips_numeric_register_alieses): New definition.
5511 (mips_gdbarch_init): Add user registers from
5512 mips_numeric_register_aliases.
5514 2009-04-01 Joel Brobecker <brobecker@adacore.com>
5516 * linux-nat.c (linux_nat_filter_event): Minor comment reformatting.
5518 2009-04-01 Joel Brobecker <brobecker@adacore.com>
5520 * linux-nat.c (linux_nat_filter_events): Do not delete the lwp if
5521 this is the last one.
5523 2009-04-01 Pedro Alves <pedro@codesourcery.com>
5525 * remote.c (append_resumption): New.
5526 (remote_vcont_resume): Use it.
5528 2009-04-01 Joel Brobecker <brobecker@adacore.com>
5530 * windows-nat.c (+windows_get_ada_task_ptid): New function.
5531 (init_windows_ops): Set windows_ops.to_get_ada_task_ptid.
5533 2009-03-31 Daniel Jacobowitz <dan@codesourcery.com>
5534 Keith Seitz <keiths@redhat.com>
5535 Jan Kratochvil <jan.kratochvil@redhat.com>
5538 * Makefile.in (dbxread.o): Update.
5539 * dbxread.c (read_dbx_symtab): Use cp_canonicalize_string.
5540 * dwarf2read.c (GDB_FORM_cached_string): New.
5541 (read_partial_die): Use dwarf2_canonicalize_name.
5542 (dwarf2_linkage_name): Use dwarf2_name.
5543 (dwarf2_canonicalize_name): New.
5544 (dwarf2_name): Use dwarf2_canonicalize_name.
5545 (dwarf_form_name, dump_die): Handle GDB_FORM_cached_string.
5546 * stabsread.c (define_symbol, read_type): Use cp_canonicalize_string.
5547 * symtab.c (lookup_symbol_in_language): Canonicalize input before
5549 * cp-name-parser.y: operator() requires two parameters,
5550 according to libiberty.
5551 * minsyms.c (lookup_minimal_symbol): Canonicalize input
5555 2009-03-31 Joel Brobecker <brobecker@adacore.com>
5557 Provide support for (Ada) task-specific breakpoints.
5559 * ada-lang.h (ada_get_task_number): Add declaration.
5560 (breakpoint_ada_task_match): Delete declaration.
5561 * ada-tasks.c (ada_get_task_number): Make non-static.
5562 * breakpoint.h (struct breakpoint): Add field "task".
5563 * breakpoint.c (print_one_breakpoint_location): Add handling of
5564 task-specific breakpoints.
5565 (create_breakpoint, create_breakpoints, find_condition_and_thread):
5566 New parameter "task".
5567 (break_command_really): Update calls to find_condition_and_thread
5568 and create_breakpoints.
5569 (breakpoint_re_set_one): Update call to find_condition_and_thread.
5572 2009-03-31 Joel Brobecker <brobecker@adacore.com>
5574 * ada-tasks.c (short_task_info): Eliminate the "Running" task state.
5576 2009-03-31 Pedro Alves <pedro@codesourcery.com>
5578 * remote.c (remote_notice_new_inferior): Use ptid_is_pid. Check
5579 if the thread's ptid without a thread id field is in the list
5580 before calling thread_change_ptid.
5581 (extended_remote_attach_1): In non-stop mode, do not rely on
5582 querying the current thread, instead, query the thread list, and
5583 select the first thread of the process.
5584 * gdbthread.h (first_thread_of_process): Declare.
5585 * thread.c (first_thread_of_process): Define.
5587 2009-03-30 Stan Shebs <stan@codesourcery.com>
5589 Make tracepoints into a type of breakpoint.
5590 * breakpoint.h (enum bptype): Add bp_tracepoint.
5591 (struct breakpoint): Add fields step_count, pass_count, actions.
5592 (get_tracepoint, get_tracepoint_by_number): Declare.
5593 (all_tracepoints): Declare.
5594 * breakpoint.c: Include tracepoint.h, readline.h.
5595 (ALL_TRACEPOINTS): Move here from tracepoint.c.
5596 (tracepoint_count): Ditto.
5597 (should_be_inserted): GDB does not insert tracepoints itself.
5598 (print_it_typical): Add tracepoint case.
5599 (bpstat_what): Ditto.
5600 (print_one_breakpoint_location): Ditto, and add printing for
5601 pass count, step count, and action list.
5602 (user_settable_breakpoint): Add tracepoint case.
5603 (allocate_bp_location): Ditto.
5604 (set_breakpoint_location_function): Ditto.
5605 (disable_breakpoints_in_shlibs): Ditto.
5607 (break_command_really): Add argument traceflag, use to choose
5608 basic breakpoint type.
5609 (break_command_1): Pass extra argument.
5610 (set_breakpoint, handle_gnu_v3_exceptions): Ditto.
5611 (breakpoint_re_set_one): Add tracepoint case.
5612 (disable_command, enable_command): Ditto.
5613 (set_tracepoint_count): Move here from tracepoint.c.
5614 (trace_command): Move here from tracepoint.c and use
5615 break_command_really.
5616 (tracepoints_info): Move here from tracepoint.c and call
5618 (enable_trace_command): Move here from tracepoint.c and call
5620 (disable_trace_command): Move here from tracepoint.c and call
5622 (delete_trace_command): Move here from tracepoint.c and call
5624 (trace_pass_command): Move here from tracepoint.c.
5625 (get_tracepoint_by_number): Ditto.
5626 (tracepoint_save_command): Ditto.
5627 (get_tracepoint): New function.
5628 (all_tracepoints): New function.
5629 (_initialize_breakpoint): Move tracepoint init from tracepoint.c,
5630 deprecate "enable trace" and "disable trace" commands.
5631 * tracepoint.h (struct tracepoint): Remove.
5632 (tracepoint_chain): Remove decl.
5633 (deprecated_create_tracepoint_hook): Remove decl.
5634 (deprecated_delete_tracepoint_hook): Remove decl.
5635 (deprecated_modify_tracepoint_hook): Remove decl.
5636 (ALL_TRACEPOINTS, ALL_TRACEPOINTS_SAFE): Remove.
5637 (free_actions): Update signature.
5638 (validate_actionline): Update signature.
5639 (end_actions_pseudocommand): Declare.
5640 (while_stepping_pseudocommand): Declare.
5641 * tracepoint.c: Include breakpoint.h.
5642 (tracepoint_chain, tracepoint_count): Remove.
5643 (free_actions, make_cleanup_free_actions): Update signature.
5644 (trace_command, set_raw_tracepoint): Remove.
5645 (trace_mention): Remove.
5646 (tracepoints_info): Remove.
5647 (tracepoint_operation, map_args_over_tracepoints): Remove.
5648 (get_tracepoint_by_number): Remove.
5649 (enable_trace_command, disable_trace_command): Remove.
5650 (delete_trace_command, trace_pass_command): Remove.
5651 (trace_actions_command, read_actions): Update signature.
5652 (validate_actionline): Update signature, use bp loc.
5653 (encode_actions): Ditto.
5654 (download_tracepoint): New function, body of trace_start_command.
5655 (trace_start_command): Call it, use all_tracepoints.
5656 (tracepoint_save_command): Remove.
5657 (tracepoint_dump_command): Use get_tracepoint.
5658 (end_actions_pseudocommand): Make globally visible.
5659 (while_stepping_pseudocommand): Ditto.
5660 (_initialize_tracepoint): Move command definitions to breakpoint.c.
5662 2009-03-30 Thiago Jung Bauermann <bauerman@br.ibm.com>
5664 Expose frames to Python.
5665 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-frame.o.
5666 (SUBDIR_PYTHON_SRCS): Add python-frame.c.
5667 (python-frame.o): New target.
5668 * python/python-frame.c: New file.
5669 * python/python-internal.h (gdbpy_frames, gdbpy_newest_frame,
5670 gdbpy_frame_stop_reason_string, gdbpy_selected_frame,
5671 gdbpy_initialize_frames): New prototypes.
5672 * python/python.c (_initialize_python): Call gdbpy_initialize_frames.
5673 (GdbMethods): Add `selected_frame' and `frame_stop_reason_string'
5675 * stack.c (find_frame_funname): New function, factored out of
5677 (print_frame): Call find_frame_funname.
5678 * stack.h (find_frame_funname): Add prototype.
5680 2009-03-29 Thiago Jung Bauermann <bauerman@br.ibm.com>
5682 Remove unused value_object attribute `owned_by_gdb'.
5683 * python/python-value.c (value_object): Remove owned_by_gdb
5685 (valpy_dealloc): Remove reference to self->owned_by_gdb.
5686 (valpy_new): Likewise.
5687 (value_to_value_object): Likewise.
5689 2009-03-29 Thiago Jung Bauermann <bauerman@br.ibm.com>
5691 Change gdb.Value.address from a method to an attribute.
5692 * python/python-value.c (value_object): Add `address' element.
5693 (valpy_dealloc): Decrement reference to self->address if set.
5694 (valpy_new): Initialize val_obj->address.
5695 (valpy_address): Rename to ...
5696 (valpy_get_address): ... this. Change signature from method to
5697 attribute. Update self->address if not set.
5698 (value_to_value_object): Initialize val_obj->address.
5699 (value_object_getset): Add `address' element.
5700 (value_object_methods): Remove `address' element.
5702 2009-03-29 Andreas Schwab <schwab@linux-m68k.org>
5704 * observer.sh: Set LANG/LC_ALL to C, not c.
5706 2009-03-28 Kevin Buettner <kevinb@redhat.com>
5708 * mn10300-tdep.c (mn10300_gdbarch_init): For mn10300, by default,
5711 2009-03-28 Pedro Alves <pedro@codesourcery.com>
5713 * remote.c (remote_stop_ns): If multi-process extensions are off,
5714 and GDB is requesting the whole process to stop, sent "vCont;t",
5717 2009-03-28 Pedro Alves <pedro@codesourcery.com>
5719 * inf-loop.c (inferior_event_handler): Avoid calling is_running on
5722 2009-03-27 Eli Zaretskii <eliz@gnu.org>
5724 * config/djgpp/fnchange.lst: Update to fix ARI-reported problems.
5726 2009-03-26 Doug Evans <dje@google.com>
5728 * thread.c (do_restore_current_thread_cleanup): Redo test for
5729 whether to restore old->inferior_ptid.
5731 2009-03-26 Tom Tromey <tromey@redhat.com>
5733 * breakpoint.c (resolve_sal_pc): Preserve original line number
5734 when skipping prologue.
5736 2009-03-26 Doug Evans <dje@google.com>
5738 * thread.c (inferior_thread) Remove "extern" in definition.
5740 2009-03-26 Thiago Jung Bauermann <bauerman@br.ibm.com>
5742 Add gdb.Value.is_optimized_out attribute.
5743 * python/python-value.c (valpy_get_is_optimized_out): New
5745 (value_object_getset): New variable.
5746 (value_object_type): Initialize tp_getset element.
5748 2009-03-26 Joel Brobecker <brobecker@adacore.com>
5750 Recognize missing DW_AT_location as <value optimized out>.
5752 (new_symbol <DW_TAG_variable> <!DW_AT_location> <!DW_AT_external>):
5753 Call add_symbol_to_list.
5755 2009-03-25 Tom Tromey <tromey@redhat.com>
5757 * gdbtypes.h (CHECK_TYPEDEF): Don't yield a value.
5758 * stack.c (print_this_frame_argument_p): Use check_typedef.
5760 2009-03-25 Tom Tromey <tromey@redhat.com>
5762 * configure: Rebuild.
5763 * acinclude.m4 (AM_ICONV): Set am_cv_use_build_libiconv.
5764 Rearrange flags setting. Add comments.
5766 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
5768 * config/i386/nm-i386.h: Remove code within
5769 I386_WATCHPOINTS_IN_TARGET_VECTOR conditional.
5770 * config/i386/nm-cygwin.h: Remove I386_WATCHPOINTS_IN_TARGET_VECTOR
5772 * config/i386/nm-cygwin64.h: Ditto.
5773 * config/i386/nm-fbsd.h: Ditto.
5774 * config/i386/nm-go32.h: Ditto.
5775 * config/i386/nm-linux.h: Ditto.
5776 * config/i386/nm-linux64.h: Ditto.
5778 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
5780 ARI fix: "xasprintf" rule.
5781 * printcmd.c (sym_info): Replace xasprintf by xstrprintf.
5783 2009-03-25 Pedro Alves <pedro@codesourcery.com>
5785 * remote.c (remote_start_remote): In non-stop mode, call
5786 init_wait_for_inferior before adding threads and inferiors.
5788 2009-03-25 Joel Brobecker <brobecker@adacore.com>
5790 * breakpoint.c (breakpoint_thread_match): Split a large condition
5791 into several smaller conditions. No behavior change.
5793 2009-03-25 Pedro Alves <pedro@codesourcery.com>
5795 * infrun.c (infrun_thread_thread_exit): New.
5796 (_initialize_infrun): Attach it to the thread_exit observer.
5797 * thread.c (delete_thread_1): Always call the observer, passing it
5799 * mi/mi-interp.c (mi_thread_exit): Add "silent" parameter. If
5800 SILENT, return immediately.
5802 2009-03-25 Pedro Alves <pedro@codesourcery.com>
5804 * infrun.c (normal_stop): Use has_stack_frames instead of
5806 * mi/mi-main.c (mi_execute_command): Avoid calling inferior_thread
5807 when there is no thread selected.
5808 (mi_cmd_execute): Don't special case commands that can run without
5809 a valid selected thread.
5810 * top.c (execute_command): Don't special case commands that can
5811 run without a valid selected thread. Use has_stack_frames.
5812 * infcmd.c (ensure_valid_thread): New.
5813 (continue_1, step_1, jump_command, signal_command): Use it.
5814 (detach_command): Error out if there's no selected thread/inferior.
5815 * thread.c (print_thread_info): Allow having no thread selected.
5816 (switch_to_thread): Don't read the PC if there is no current thread.
5817 (do_restore_current_thread_cleanup): Don't record the current
5818 frame if there is no current thread.
5819 (make_cleanup_restore_current_thread): Don't read frame info if
5820 there is no selected thread.
5821 (_initialize_thread): Don't mark commands as
5822 "no_selected_thread_ok".
5823 * frame.c (get_current_frame): Error out if there is no valid
5825 (has_stack_frames): Return false if there is no valid
5827 * cli/cli-cmds.c (init_cli_cmds): Don't mark commands as
5828 "no_selected_thread_ok".
5829 * cli/cli-decode.c (set_cmd_no_selected_thread_ok)
5830 (get_cmd_no_selected_thread_ok): Delete.
5831 * cli/cli-decode.h (CMD_NO_SELECTED_THREAD_OK): Delete.
5832 (set_cmd_no_selected_thread_ok, get_cmd_no_selected_thread_ok):
5834 * stack.c (get_selected_block): Use has_stack_frames.
5836 2009-03-25 Thiago Jung Bauermann <bauerman@br.ibm.com>
5838 Fix size of FPSCR in Power 7 processors.
5839 * ppc-linux-nat.c (PPC_FEATURE_ARCH_2_05): Remove #define.
5840 (PPC_FEATURE_HAS_DFP): New #define.
5841 (ppc_linux_read_description): Check for DFP feature instead of
5842 ISA 2.05 to decide on size of the FPSCR.
5844 2009-03-25 Kevin Buettner <kevinb@redhat.com>
5846 * mn10300-tdep.c (trad-frame.h): Don't include.
5847 (prologue-value.h): Include.
5848 (mn10300_frame_unwind_cache, set_reg_offsets): Delete.
5849 (struct mn10300_prologue): Define.
5850 (push_reg, translate_rreg, check_for_saved): New functions.
5851 (mn10300_analyze_prologue): Rewrite, using prologue-value
5852 machinery. Handle more instructions than before. Permit
5853 instructions to occur in any order.
5854 (mn10300_skip_prologue): Find the extents of the function
5855 in question; mn10300_analyze_prologue no longer does this.
5856 (mn10300_analyze_frame_prologue): New function.
5857 (mn10300_frame_base): New function.
5858 (mn10300_frame_this_id): Rewrite, no longer using trad-frame
5860 (mn10300_frame_prev_register): Likewise.
5861 (mn10300_frame_base_address, mn10300_frame_base struct): Delete.
5862 (mn10300_unwind_pc, mn10300_unwind_sp): Rename `next_frame' to
5864 (mn10300_frame_unwind_init): Don't call frame_base_set_default().
5866 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
5868 Fix completer problem for filename completion on the first try.
5870 * gdb/completer.h (gdb_completion_word_break_characters): New function.
5871 * gdb/completer.c: Include gdb_assert.h.
5872 (complete_line_internal_reason): New enum.
5873 (complete_line_internal): Change last argument type to
5874 complete_line_internal_reason.
5875 Modify function to handle the different complete_line_internal_reason
5877 (complete_line): Adapt to change in complete_line_internal.
5878 (command_completer): Ditto.
5879 (gdb_completion_word_break_characters): Implement new function.
5880 * top.c (init_main): Set rl_completion_word_break_hook to
5881 gdb_completion_word_break_characters.
5884 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
5886 ARI fix: "strlen d_name" rule.
5887 * linux-nat.c (linux_nat_xfer_osdata): Use NAMELEN macro.
5890 2009-03-24 Tom Tromey <tromey@redhat.com>
5891 Pedro Alves <pedro@codesourcery.com>
5893 * configure, config.in: Rebuild.
5894 * configure.ac: Check for libiconvlist.
5895 * charset.c: Check HAVE_LIBICONVLIST.
5896 * acinclude.m4 (AM_ICONV): Don't subst LIBICONV, LIBICONV_INCLUDE,
5897 LIBICONV_LIBDIR. Update CPPFLAGS and LIBS.
5898 * Makefile.in (LIBICONV, LIBICONV_INCLUDE, LIBICONV_LIBDIR):
5900 (INTERNAL_CFLAGS_BASE): Update.
5901 (INTERNAL_LDFLAGS): Update.
5904 2009-03-24 Jan Kratochvil <jan.kratochvil@redhat.com>
5906 * configure.ac: Initialize the variable $PREFER_CURSES.
5907 * configure: Regenerated.
5909 2009-03-24 Jan Kratochvil <jan.kratochvil@redhat.com>
5911 * configure.ac: Enable $PREFER_CURSES even with default $ENABLE_TUI.
5912 * configure: Regenerated.
5914 2009-03-24 Pierre Muller <muller@ics.u-strasbg.fr>
5916 ARI fix: "strerror" rule.
5917 * darwin-nat.c (darwin_ptrace): Use safe_strerror.
5918 (darwin_stop_inferior, darwin_attach, darwin_detach): Ditto.
5920 2009-03-23 Joel Brobecker <brobecker@adacore.com>
5922 * ada-exp.y (get_symbol_field_type): Make sure to resolve typedefs
5923 before looking up the fields inside our struct type.
5925 2009-03-23 Joel Brobecker <brobecker@adacore.com>
5927 * ada-lang.c (resolve_subexp) [UNOP_QUAL]: Resolve typedefs before
5928 trying to resolve the type qualification.
5930 2009-03-23 Joel Brobecker <brobecker@adacore.com>
5932 * ada-lang.c (ada_evaluate_subexp) [UNOP_IN_RANGE]: make sure
5933 we try to apply the attribute on the real type, rather than
5934 its associated typedef.
5936 2009-03-23 Joel Brobecker <brobecker@adacore.com>
5938 * ada-lang.c (ada_evaluate_subexp) [OP_ATR_MODULUS]: Use check_typdef
5939 to make sure we try to get the modulus of the actual type, not the
5942 2009-03-23 Joel Brobecker <brobecker@adacore.com>
5944 * ada-lang.c (ada_evaluate_subexp): [OP_ATR_FIRST, OP_ATR_LAST]
5945 [OP_ATR_LENGTH]: When using the attribute on a type, make sure
5946 to get the real type, not the associated typedef.
5948 2009-03-23 Joel Brobecker <brobecker@adacore.com>
5950 * ada-lang.c (ada_get_field_index): Add handling of the case
5951 when TYPE is a typedef of a struct.
5953 2009-03-23 Joel Brobecker <brobecker@adacore.com>
5955 Add gdb_usleep as a portable version of usleep based on gdb_select.
5956 * gdb_usleep.h, gdb_usleep.c: New files.
5957 * Makefile.in (SFILES): Add gdb_usleep.c.
5958 (HFILES_NO_SRCDIR): Add gdb_usleep.h.
5959 (COMMON_OBS): Add gdb_usleep.o.
5960 * ser-unix.c (hardwire_send_break): Replace call to gdb_select
5961 by call to gdb_usleep.
5963 2009-03-23 Joel Brobecker <brobecker@adacore.com>
5965 * buildsym.c (end_symtab): If we ignore the subfiles, then
5966 unlink the associated symtabs if they were already allocated.
5968 2009-03-23 Jerome Guitton <guitton@adacore.com>
5970 Provide a way to force building of GDB with libcurses.
5971 * configure.ac: Add --with-curses.
5972 * configure: Regenerated.
5974 2009-03-23 Tom Tromey <tromey@redhat.com>
5976 * dwarf2expr.c (execute_stack_op) <DW_OP_GNU_uninit>: Fix typo in
5979 2009-03-23 Paul Pluzhnikov <ppluzhnikov@google.com>
5981 * breakpoint.c (disable_breakpoints_in_unloaded_shlib): Use
5982 solib_contains_address_p instead of searching.
5984 2009-03-23 Tom Tromey <tromey@redhat.com>
5986 * charset.c (ICONV_CONST) <PHONY_ICONV>: Define.
5987 (iconv): Make 'inbuf' argument const.
5988 (convert_between_encodings): Use ICONV_CONST.
5989 (wchar_iterate): Likewise.
5991 2009-03-22 Christopher Faylor <me+cygwin@cgf.cx>
5993 * windows-nat.c (AdjustTokenPrivileges): Implement macro wraparound for
5994 dynamically loaded function.
5995 (LookupPrivilegeValueA): Ditto.
5996 (OpenProcessToken): Ditto.
5997 (AdjustTokenPrivileges): Rename and define placeholder for address of
5998 dynamically loaded function.
5999 (LookupPrivilegeValueA): Ditto.
6000 (OpenProcessToken): Ditto.
6001 (set_process_privilege): Remove check for loaded functions.
6002 (bad_OpenProcessToken): Define.
6003 (_initialize_loadable): Load token functions from advapi here, setting
6004 OpenProcessToken function to a dummy static function which always return
6005 error if OS doesn't support this functionality.
6007 2009-03-22 Nicolas Roche <roche@adacore.com>
6008 Christopher Faylor <me+cygwin@cgf.cx>
6010 * win32-nat.c (ctrl_c_handler): New function.
6011 (win32_wait): Register ctrl_c_handler as Ctrl-C handler if the inferior
6012 is run in a separate console.
6014 2009-03-22 Christopher Faylor <me+cygwin@cgf.cx>
6016 * windows-nat.c (DebugActiveProcessStop): Implement macro wraparound
6017 for dynamically loaded function.
6018 (DebugBreakProcess): Ditto.
6019 (DebugSetProcessKillOnExit): Ditto.
6020 (EnumProcessModules): Ditto.
6021 (GetModuleFileNameExA): Ditto.
6022 (GetModuleInformation): Ditto.
6023 (DebugActiveProcessStop): Rename and define placeholder for address of
6024 dynamically loaded function.
6025 (DebugBreakProcess): Ditto.
6026 (DebugSetProcessKillOnExit): Ditto.
6027 (EnumProcessModules): Ditto.
6028 (GetModuleFileNameExA): Ditto.
6029 (GetModuleInformation): Ditto.
6030 (psapi_loaded): Delete.
6031 (get_module_name): Don't check psapi_loaded, just rely on the fact that
6032 dynamically loaded functions will return failure if they weren't
6034 (has_detach_ability): Delete.
6035 (windows_attach): Remove call to has_detach_ability (). Just rely on
6036 functions being callable.
6037 (bad_DebugActiveProcessStop): Define.
6038 (bad_DebugBreakProcess): Ditto.
6039 (bad_DebugSetProcessKillOnExit): Ditto.
6040 (bad_EnumProcessModules): Ditto.
6041 (bad_GetModuleFileNameExA): Ditto.
6042 (bad_GetModuleInformation): Ditto.
6043 (_initialize_loadable): Rename from _initialize_psapi. Initialize all
6044 dynamic storage here, setting nonexistent functions to dummy static
6045 functions which always return error.
6047 2009-03-22 Pedro Alves <pedro@codesourcery.com>
6049 * mi/mi-interp.c (mi_interpreter_init): Attach mi_about_to_proceed
6050 to the about_to_proceed observer notification.
6051 (mi_about_to_proceed): New.
6052 (mi_on_resume): Only output ^running and the prompt here if the
6053 target was proceeded.
6054 * breakpoint.c (breakpoint_proceeded): New static.
6055 (breakpoint_about_to_proceed): New.
6056 (_initialize_breakpoints): Attach breakpoint_about_to_proceed to
6057 the about_to_proceed observer notification.
6058 * inferior.h (breakpoint_proceeded): Delete declaration.
6059 * infrun.c (clear_proceed_status): Don't set breakpoint_proceeded.
6060 Notify the about_to_proceed observers.
6061 (struct inferior_status): Delete breakpoint_proceeded member.
6062 (save_inferior_status): Don't save it.
6063 (restore_inferior_status): Don't restore it.
6064 * mi-main.h (mi_proceeded): Declare.
6065 * mi/mi-main.c (mi_cmd_execute): Clear mi_proceeded before running
6068 2009-03-22 Pedro Alves <pedro@codesourcery.com>
6070 * gdbthread.h (struct thread_info): Add in_infcall member.
6071 * infcall.c (run_inferior_call): Save, set and restore in_infcall.
6072 Remove reverences to suppress_resume_observer. Refresh
6073 `call_thread' after returning from `proceed'.
6074 * infcmd.c (suppress_resume_observer): Delete.
6075 * inferior.h (suppress_resume_observer): Delete declaration.
6076 * mi/mi-interp.c (mi_on_resume): Suppress output while calling an
6078 * thread.c (set_running): Remove references to
6079 suppress_resume_observer.
6080 * infrun.c (struct inferior_status): Add in_infcall member.
6081 (save_inferior_status): Save it.
6082 (restore_inferior_status): Restore it.
6084 2009-03-22 Pedro Alves <pedro@codesourcery.com>
6086 * infcall.c (run_inferior_call): Remove references to
6087 suppress_stop_observer.
6088 * infcmd.c (suppress_stop_observer): Delete.
6089 (finish_command_continuation): Remove NOTE. Don't clear
6090 suppress_stop_observer anymore.
6091 (finish_command_continuation_free_arg): Likewise.
6092 (finish_forward): Remove references to suppress_stop_observer.
6093 Call normal_stop observer if we haven't already.
6094 * inferior.h (suppress_stop_observer): Delete.
6095 * infrun.c (normal_stop): When deciding to suppress the
6096 normal_stop observer, check for proceed_to_finish instead of
6097 suppress_stop_observer.
6099 2009-03-22 Pedro Alves <pedro@codesourcery.com>
6101 * symfile.c (symfile_relocate_debug_section): Remove check for
6104 2009-03-21 Jan Kratochvil <jan.kratochvil@redhat.com>
6105 Jim Blandy <jimb@red-bean.com>
6106 Thiago Jung Bauermann <bauerman@br.ibm.com>
6107 Tom Tromey <tromey@redhat.com>
6109 Miscellaneous fixes to the Python code.
6110 * python/python-cmd.c (cmdpy_init): Accept keyword
6112 * python/python-value.c (valpy_string): Accept keyword
6114 (valpy_binop): Use `break' to exit from the TRY_CATCH block.
6115 Do not call value_to_value_object on NULL RES_VAL.
6116 (value_object_methods): Change `string' entry to also accept
6118 (convert_value_from_python): Return a copy of the value if obj is
6120 (value_object_methods): Mark the `string' method as accepting
6121 keywords, and show method "prototype" in the doc string.
6122 * python/python.c (get_parameter): Don't return inside a
6125 2009-03-20 Tom Tromey <tromey@redhat.com>
6127 Add support for convenience functions in Python.
6128 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-function.o.
6129 (SUBDIR_PYTHON_SRCS): Add python-function.c.
6130 (python-function.o): New target.
6131 * eval.c: Include "python/python.h" and <ctype.h>.
6132 (evaluate_subexp_standard): Handle values of type
6133 TYPE_CODE_INTERNAL_FUNCTION.
6134 * gdbtypes.h (type_code): Add TYPE_CODE_INTERNAL_FUNCTION.
6135 * parse.c (write_exp_string): Remove duplicate word in comment.
6136 * python/python-function.c: New file.
6137 * python/python-internal.h (gdbpy_initialize_functions): Add
6139 * python/python.c (_initialize_python): Call
6140 gdbpy_initialize_functions.
6141 * valprint.c (value_check_printable): Handle values of type
6142 TYPE_CODE_INTERNAL_FUNCTION.
6143 * value.c: Include "cli/cli-decode.h".
6144 (internal_function): New struct.
6145 (functionlist, internal_fn_type): New static variables.
6146 (lookup_only_internalvar,
6147 lookup_internalvar): Add const qualifier to name argument.
6148 (create_internalvar): Likewise. Initialize new field.
6149 (set_internal_var): Fix typo in comment. Don't allow assignment
6150 to canonical variable.
6151 (value_create_internal_function, value_internal_function_name,
6152 call_internal_function, function_command, function_destroyer,
6153 add_internal_function): New functions.
6154 (_initialize_values): Create `function' placeholder command.
6155 Initialize internal_fn_type.
6156 * value.h (lookup_only_internalvar, create_internalvar,
6157 lookup_internalvar): Add const qualifier to name argument.
6158 (internal_function_fn, add_internal_function, call_internal_function,
6159 value_internal_function_name): Add prototypes.
6160 (struct internalvar) <canonical>: New field.
6162 2009-03-20 Tom Tromey <tromey@redhat.com>
6164 * c-lang.c (evaluate_subexp_c): Call check_typedef.
6166 2009-03-20 Tom Tromey <tromey@redhat.com>
6167 Julian Brown <julian@codesourcery.com>
6169 PR i18n/7220, PR i18n/7821, PR exp/8815, PR exp/9103,
6170 PR i18n/9401, PR exp/9613:
6172 * value.h (value_typed_string): Declare.
6173 (val_print_string): Update.
6174 * valprint.h (print_char_chars): Update.
6175 * valprint.c (print_char_chars): Add type argument. Update.
6176 (val_print_string): Likewise.
6177 * valops.c (value_typed_string): New function.
6178 * utils.c (host_char_to_target): New function.
6179 (parse_escape): Use host_char_to_target, host_hex_value. Update.
6181 (no_control_char_error): Remove.
6182 * typeprint.c (print_type_scalar): Update.
6183 * scm-valprint.c (scm_scmval_print): Update.
6184 * scm-lang.h (scm_printchar, scm_printstr): Update.
6185 * scm-lang.c (scm_printchar): Add type argument.
6186 (scm_printstr): Likewise.
6187 * printcmd.c (print_formatted): Update.
6188 (print_scalar_formatted): Update.
6189 (printf_command) <wide_string_arg, wide_char_arg>: New constants.
6190 Handle '%lc' and '%ls'.
6191 * parser-defs.h (struct typed_stoken): New type.
6192 (struct stoken_vector): Likewise.
6193 (write_exp_string_vector): Declare.
6194 * parse.c (write_exp_string_vector): New function.
6195 * p-valprint.c (pascal_val_print): Update.
6196 * p-lang.h (is_pascal_string_type, pascal_printchar,
6197 pascal_printstr): Update.
6198 * p-lang.c (is_pascal_string_type): Remove 'char_size' argument.
6199 Add 'char_type' argument.
6200 (pascal_emit_char): Add type argument.
6201 (pascal_printchar): Likewise.
6202 (pascal_printstr): Likewise.
6203 * objc-lang.c (objc_emit_char): Add type argument.
6204 (objc_printchar): Likewise.
6205 (objc_printstr): Likewise.
6206 * macroexp.c (get_character_constant): Handle unicode characters.
6208 (get_string_literal): Handle unicode strings. Use
6210 * m2-valprint.c (print_unpacked_pointer): Update.
6211 (m2_print_array_contents): Update.
6212 (m2_val_print): Update.
6213 * m2-lang.c (m2_emit_char): Add type argument.
6214 (m2_printchar): Likewise.
6215 (m2_printstr): Likewise.
6216 * language.h (struct language_defn) <la_printchar>: Add type
6218 <la_printstr, la_emitchar>: Likewise.
6219 (LA_PRINT_CHAR): Likewise.
6220 (LA_PRINT_STRING): Likewise.
6221 (LA_EMIT_CHAR): Likewise.
6222 * language.c (unk_lang_emit_char): Add type argument.
6223 (unk_lang_printchar): Likewise.
6224 (unk_lang_printstr): Likewise.
6225 * jv-valprint.c (java_val_print): Update.
6226 * jv-lang.c (java_emit_char): Add type argument.
6227 * f-valprint.c (f_val_print): Update.
6228 * f-lang.c (f_emit_char): Add type argument.
6229 (f_printchar): Likewise.
6230 (f_printstr): Likewise.
6231 * expprint.c (print_subexp_standard): Update.
6232 * charset.h (target_wide_charset): Declare.
6233 (c_target_char_has_backslash_escape, c_parse_backslash,
6234 host_char_print_literally, host_char_to_target,
6235 target_char_to_host, target_char_to_control_char): Remove.
6236 (enum transliterations): New type.
6237 (convert_between_encodings): Declare.
6238 (HOST_ESCAPE_CHAR): New define.
6239 (host_letter_to_control_character, host_hex_value): Declare.
6240 (enum wchar_iterate_result): New enum.
6241 (struct wchar_iterator): Declare.
6242 (make_wchar_iterator, make_cleanup_wchar_iterator, wchar_iterator,
6243 wchar_push_back): Declare.
6244 * charset-list.h: New file.
6245 * c-valprint.c (textual_name): New function.
6246 (textual_element_type): Handle wide character types.
6247 (c_val_print): Pass original type to textual_element_type. Handle
6248 wide character types.
6249 (c_value_print): Use textual_element_type. Pass original type of
6251 * c-lang.h (enum c_string_type): New type.
6252 (c_printchar, c_printstr): Update.
6253 * c-lang.c (classify_type): New function.
6254 (print_wchar): Likewise.
6255 (c_emit_char): Add type argument. Handle wide characters.
6256 (c_printchar): Likewise.
6257 (c_printstr): Add type argument. Handle wide and multibyte
6259 (convert_ucn): New function.
6260 (emit_numeric_character): Likewise.
6261 (convert_octal): Likewise.
6262 (convert_hex): Likewise.
6263 (ADVANCE): New macro.
6264 (convert_escape): New function.
6265 (parse_one_string): Likewise.
6266 (evaluate_subexp_c): Likewise.
6267 (exp_descriptor_c): New global.
6268 (c_language_defn): Use exp_descriptor_c.
6269 (cplus_language_defn): Likewise.
6270 (asm_language_defn): Likewise.
6271 (minimal_language_defn): Likewise.
6272 (charset_for_string_type): New function.
6273 * c-exp.y (%union): Add 'svec' and 'tsval'.
6275 (exp): Add CHAR production.
6276 (string_exp): Rewrite.
6277 (exp) <string_exp>: Rewrite.
6278 (tempbuf): Now global.
6279 (tempbuf_init): New global.
6280 (parse_string_or_char): New function.
6281 (yylex) <tempbuf>: Now global.
6282 <tokptr, tempbufindex, tempbufsize, token_string, class_prefix>:
6284 Handle 'u', 'U', and 'L' prefixes. Call parse_string_or_char.
6285 (c_parse_escape): New function.
6286 * auxv.c (fprint_target_auxv): Update.
6287 * ada-valprint.c (ada_emit_char): Add type argument.
6288 (ada_printchar): Likewise.
6289 (ada_print_scalar): Update.
6290 (printstr): Add type argument. Update calls to ada_emit_char.
6291 (ada_printstr): Add type argument.
6292 (ada_val_print_array): Update.
6293 (ada_val_print_1): Likewise.
6294 * ada-lang.c (emit_char): Add type argument.
6295 * ada-lang.h (ada_emit_char, ada_printchar, ada_printstr): Add
6297 * gdb_locale.h: Include langinfo.h.
6298 * charset.c (_initialize_charset): Set default host charset from
6299 the locale. Don't register charsets. Add target-wide-charset
6300 commands. Call find_charset_names.
6301 (struct charset, struct translation): Remove.
6302 (GDB_DEFAULT_HOST_CHARSET): Remove.
6303 (GDB_DEFAULT_TARGET_WIDE_CHARSET): New define.
6304 (target_wide_charset_name): New global.
6305 (show_host_charset_name): Handle "auto".
6306 (show_target_wide_charset_name): New function.
6307 (host_charset_enum, target_charset_enum): Remove.
6308 (charset_enum): New global.
6309 (all_charsets, register_charset, lookup_charset, all_translations,
6310 register_translation, lookup_translation): Remove.
6311 (simple_charset, ascii_print_literally, ascii_to_control): Remove.
6312 (iso_8859_print_literally, iso_8859_to_control,
6313 iso_8859_family_charset): Remove.
6314 (ebcdic_print_literally, ebcdic_to_control,
6315 ebcdic_family_charset): Remove.
6316 (struct cached_iconv, check_iconv_cache, cached_iconv_convert,
6317 register_iconv_charsets): Remove.
6318 (target_wide_charset_be_name, target_wide_charset_le_name): New
6320 (identity_either_char_to_other): Remove.
6321 (set_be_le_names, validate): New functions.
6322 (backslashable, backslashed, represented): Remove.
6323 (default_c_target_char_has_backslash_escape): Remove.
6324 (default_c_parse_backslash, iconv_convert): Remove.
6325 (ascii_to_iso_8859_1_table, ascii_to_ebcdic_us_table,
6326 ascii_to_ibm1047_table, iso_8859_1_to_ascii_table,
6327 iso_8859_1_to_ebcdic_us_table, iso_8859_1_to_ibm1047_table,
6328 ebcdic_us_to_ascii_table, ebcdic_us_to_iso_8859_1_table,
6329 ebcdic_us_to_ibm1047_table, ibm1047_to_ascii_table,
6330 ibm1047_to_iso_8859_1_table, ibm1047_to_ebcdic_us_table): Remove.
6331 (table_convert_char, table_translation, simple_table_translation):
6333 (current_host_charset, current_target_charset,
6334 c_target_char_has_backslash_escape_func,
6335 c_target_char_has_backslash_escape_baton): Remove.
6336 (c_parse_backslash_func, c_parse_backslash_baton): Remove.
6337 (host_char_to_target_func, host_char_to_target_baton): Remove.
6338 (target_char_to_host_func, target_char_to_host_baton): Remove.
6339 (cached_iconv_host_to_target, cached_iconv_target_to_host):
6341 (lookup_charset_or_error, check_valid_host_charset): Remove.
6342 (set_host_and_target_charsets): Remove.
6343 (set_host_charset, set_target_charset): Remove.
6344 (set_host_charset_sfunc, set_target_charset_sfunc): Rewrite.
6345 (set_target_wide_charset_sfunc): New function.
6346 (show_charset): Print target wide character set.
6347 (host_charset, target_charset): Rewrite.
6348 (target_wide_charset): New function.
6349 (c_target_char_has_backslash_escape): Remove.
6350 (c_parse_backslash): Remove.
6351 (host_letter_to_control_character): New function.
6352 (host_char_print_literally): Remove.
6353 (host_hex_value): New function.
6354 (target_char_to_control_char): Remove.
6355 (cleanup_iconv): New function.
6356 (convert_between_encodings): New function.
6357 (target_char_to_host): Remove.
6358 (struct wchar_iterator): Define.
6359 (make_wchar_iterator, make_cleanup_wchar_iterator, wchar_iterator,
6360 wchar_push_back): New functions.
6361 (do_cleanup_iterator): New function.
6362 (char_ptr): New typedef.
6363 (charsets): New global.
6364 (add_one, find_charset_names): New functions.
6365 (default_charset_names): New global.
6366 (auto_host_charset_name): Likewise.
6367 * aclocal.m4, config.in, configure: Rebuild.
6368 * configure.ac: Call AM_LANGINFO_CODESET.
6369 (GDB_DEFAULT_HOST_CHARSET): Default to UTF-8.
6370 (AM_ICONV): Invoke earlier.
6371 * acinclude.m4: Include codeset.m4. Subst LIBICONV_INCLUDE and
6372 LIBICONV_LIBDIR. Check for libiconv in build tree.
6373 * Makefile.in (LIBICONV_LIBDIR, LIBICONV_INCLUDE): New macros.
6374 (INTERNAL_CFLAGS_BASE): Add LIBICONV_INCLUDE.
6375 (INTERNAL_LDFLAGS): Add LIBICONV_LIBDIR.
6376 * gdb_obstack.h (obstack_grow_wstr): New define.
6377 * gdb_wchar.h: New file.
6378 * defs.h: Include it.
6380 2009-03-20 Tom Tromey <tromey@redhat.com>
6381 Jan Kratochvil <jan.kratochvil@redhat.com>
6383 * dwarf2read.c (process_die): Handle DW_TAG_typedef.
6384 * eval.c (evaluate_subexp_standard) <OP_TYPE>: Strip a single
6386 * ada-lang.c (decode_packed_array_type): Call CHECK_TYPEDEF on the
6388 * ada-typeprint.c (print_array_type): Do the NULL check
6391 2009-03-19 Tom Tromey <tromey@redhat.com>
6393 * utils.c (do_obstack_free): New function.
6394 (make_cleanup_obstack_free): Likewise.
6395 * defs.h (make_cleanup_obstack_free): Declare.
6397 2009-03-18 Doug Evans <dje@google.com>
6399 * linux-nat.c (linux_nat_find_memory_regions): Result of PIDGET is an
6400 int, not a long long.
6401 (linux_nat_info_proc_cmd): Store pid in long instead of long long.
6403 * expprint.c (dump_raw_expression): Print note if non-NULL.
6405 * printcmd.c (display_uses_solib_p): Redo loop, scan element list
6408 2009-03-18 Nathan Sidwell <nathan@codesourcery.com>
6410 * Makefile.in: Update license to GPLv3.
6411 * ada-exp.y: Update license to GPLv3.
6412 * ada-lex.l: Update license to GPLv3.
6413 * c-exp.y: Update license to GPLv3.
6414 * cp-name-parser.y: Update license to GPLv3.
6415 * darwin-nat-info.c: Update license to GPLv3.
6416 * f-exp.y: Update license to GPLv3.
6417 * gdb_thread_db.h: Update license to GPLv3.
6418 * hppanbsd-nat.c: Update license to GPLv3.
6419 * hppanbsd-tdep.c: Update license to GPLv3.
6420 * hppaobsd-tdep.c: Update license to GPLv3.
6421 * jv-exp.y: Update license to GPLv3.
6422 * m2-exp.y: Update license to GPLv3.
6423 * objc-exp.y: Update license to GPLv3.
6424 * p-exp.y: Update license to GPLv3.
6425 * reply_mig_hack.awk: Update license to GPLv3.
6426 * reverse.c: Update license to GPLv3.
6427 * xtensa-xtregs.c: Update license to GPLv3.
6429 2009-03-18 Pedro Alves <pedro@codesourcery.com>
6431 * remote.c (remote_close): Don't call generic_mourn_inferior.
6432 (remote_mourn_1): Call generic_mourn_inferior after closing the
6435 2009-03-18 Pedro Alves <pedro@codesourcery.com>
6437 * remote.c (remote_start_remote): Add missing call to
6438 init_wait_for_inferior in non-stop mode.
6440 2009-03-18 Pedro Alves <pedro@codesourcery.com>
6442 * breakpoint.c (bpstat_should_step): Only consider software
6443 watchpoints that have a location.
6445 2009-03-17 Joel Brobecker <brobecker@adacore.com>
6447 Add a target_ops parameter to the to_kill method in struct target_ops.
6449 * target.h (struct target_ops): Add a "target_ops *" parameter to
6451 (target_kill): Remove macro. Add declaration.
6452 * target.c (debug_to_kill): Delete, no longer necessary.
6453 (target_kill): New function.
6454 (update_current_target): Stop inheriting the to_kill method.
6455 Do not de_fault it to no_process either.
6456 (setup_target_debug): Do not set current_target.to_kill.
6457 * gnu-nat.c, go32-nat.c, hpux-thread.c, inf-ptrace.c, inf-ttrace.c,
6458 linux-nat.c, monitor.c, nto-procfs.c, procfs.c, remote-m32r-sdi.c,
6459 remote-mips.c, remote-sim.c, remote.c, windows-nat.c: Update
6462 2009-03-17 Doug Evans <dje@google.com>
6464 * amd64-linux-nat.c (si_timerid,si_overrun): Provide definition for
6465 glibc 2.3.2 and earlier.
6467 2009-03-17 Joel Brobecker <brobecker@adacore.com>
6469 * frame.c (get_prev_frame_1): Do not perform the inner_frame
6470 sanity check if this_frame is not NORMAL.
6471 (frame_id_inner): Update the description of this function.
6473 2009-03-17 Hui Zhu <teawater@gmail.com>
6475 * stack.c: Change the introduce of "disassemble-next-line".
6477 2009-03-17 Pedro Alves <pedro@codesourcery.com>
6479 * mi/mi-main.h (mi_print_timing_maybe): Add strict prototype,
6482 2009-03-17 Hui Zhu <teawater@gmail.com>
6484 * stack.c: Include valprint.h.
6485 (disassemble_next_line): New enum.
6486 (show_disassemble_next_line): New function. Show the current
6487 value of disassemble-next-line.
6488 (gdb_disassembly_stub_args): New struct for argument passing
6489 between function do_gdb_disassembly and function
6490 gdb_disassembly_stub.
6491 (gdb_disassembly_stub): New function. Helper for
6493 (do_gdb_disassembly): New function. Use TRY_CATCH to catch
6494 the exception from the gdb_disassembly because it will be
6495 broken by filter sometime.
6496 (print_frame_info): If disassemble-next-line is set to auto
6497 or on and doesn't have the line debug messages for $pc,
6498 output the next instruction.
6499 If disassemble-next-line is set to on and there is line debug
6500 messages, output assembly codes for next line.
6501 (_initialize_stack): Make the "set disassemble-next-line"
6502 command an auto-boolean command. Change its class to
6503 class_stack. Place it in the top level set list. Extend help
6504 to describe the auto mode.
6506 2009-03-17 Pedro Alves <pedro@codesourcery.com>
6508 * infrun.c (normal_stop): Don't overwrite old_chain.
6510 2009-03-16 Joel Brobecker <brobecker@adacore.com>
6512 * remote-mips.c (mips_load): Replace call to regcache_set_valid_p,
6513 which is undefined, by call to regcache_invalidate, which should
6514 do what the original author wanted to do.
6516 2009-03-16 Joel Brobecker <brobecker@adacore.com>
6518 * remote-mips.c (mips_mourn_inferior): Add missing ops parameter.
6519 (mips_create_inferior): Likewise.
6521 2009-03-16 Joel Brobecker <brobecker@adacore.com>
6523 * go32-nat.c (go32_create_inferior): Add missing ops parameter.
6525 2009-03-16 Joel Brobecker <brobecker@adacore.com>
6527 * darwin-nat.c (darwin_resume): Fix a compiler warning when
6528 building on x86_64-darwin.
6530 2009-03-16 Tristan Gingold <gingold@adacore.com>
6532 * configure.tgt: Add handling for x86_64-darwin.
6534 2009-03-16 Jan Kratochvil <jan.kratochvil@redhat.com>
6536 * auxv.c (fprint_target_auxv): New TAG for AT_RANDOM.
6538 2009-03-15 Joel Brobecker <brobecker@adacore.com>
6540 * aix-thread.c (aix_thread_thread_alive, aix_thread_pid_to_str):
6541 Use the ops parameter to get to the target beneath, rather than
6542 using the current_target global. Using the current_target global
6543 was an unintended accident.
6545 2009-03-15 Joel Brobecker <brobecker@adacore.com>
6547 Fix an error happening while loading symbols from a core file
6550 * rs6000-nat.c (xcoff_relocate_symtab): Use target_has_execution
6551 to detect whether we're debugging a core file or not.
6553 2009-03-15 Joel Brobecker <brobecker@adacore.com>
6555 Modernize the aix-thread later by getting rid of the base_target
6556 global. This brings back to life the AIX port which was otherwise
6557 crashing all the time.
6559 * aix-thread.c (base_target): Delete.
6560 (pd_enable): Do not set base_target.
6561 (aix_thread_attach): Use find_target_beneath instead of base_target.
6562 (aix_thread_detach, aix_thread_resume, aix_thread_wait)
6563 (aix_thread_fetch_registers, aix_thread_store_registers),
6564 (aix_thread_xfer_partial, aix_thread_mourn_inferior)
6565 (aix_thread_thread_alive, aix_thread_pid_to_str): Likewise.
6566 (aix_thread_kill): Delete. Does not seem necessary.
6567 (init_aix_thread_ops): Do not set aix_thread_ops.to_kill.
6569 2009-03-15 Jan Kratochvil <jan.kratochvil@redhat.com>
6571 * stack.c (return_command <retval_exp>): New variables retval_expr
6572 and old_chain. Inline parse_and_eval to initialize retval_expr. Check
6573 RETVAL_EXPR for UNOP_CAST and set RETURN_TYPE to the RETURN_VALUE type
6574 if RETURN_TYPE is NULL.
6576 2009-03-14 Pedro Alves <pedro@codesourcery.com>
6578 * remote.c (PACKET_qAttached): New.
6579 (remote_query_attached): New.
6580 (remote_add_inferior): Add new `attached' argument. Handle it.
6581 (remote_notice_new_inferior, remote_start_remote): Adjust to pass
6582 -1 to remote_add_inferior in new parameter.
6583 (extended_remote_attach_1): Adjust to pass 1 to
6584 remote_add_inferior in the new parameter.
6585 (extended_remote_create_inferior_1): Adjust to pass 0 to
6586 remote_add_inferior in the new parameter.
6587 (_initialize_remote): Add "set/show remote query-attached-packet"
6590 2009-03-13 Tom Tromey <tromey@redhat.com>
6592 * symtab.c (lookup_symbol_in_language): Use a cleanup.
6594 2009-03-13 Doug Evans <dje@google.com>
6596 * exceptions.h: Clean up some comments on catch_exceptions usage.
6597 * exceptions.c: Ditto. Plus mark catch_errors as superseded by
6600 2009-02-17 Joel Brobecker <brobecker@adacore.com>
6602 The following patch helps getting rid of a warning inside solib-som.c.
6604 * source.c (source_full_path_of): Constify parameter filename.
6605 * defs.h (source_full_path_of): Update declaration accordingly.
6607 2009-03-12 Joel Brobecker <brobecker@adacore.com>
6609 * ada-lang.c (ada_evaluate_subexp): Merge case BINOP_REM and
6610 BINOP_MOD cases with the handling of case BINOP_DIV and BINOP_MUL.
6611 Remove useless op value checks when EVAL_AVOID_SIDE_EFFECTS.
6613 2009-03-12 Joel Brobecker <brobecker@adacore.com>
6615 * ada-lang.c (ada_evaluate_subexp) <BINOP_DIV>: make sure to
6616 promote the operands when noside is EVAL_AVOID_SIDE_EFFECTS.
6618 2009-03-12 Joel Brobecker <brobecker@adacore.com>
6620 * ada-tasks.c (ada_task_is_alive): Move up and make static.
6621 * ada-lang.h (ada_task_is_alive): Remove declaration.
6623 2009-03-12 Jerome Guitton <guitton@adacore.com>
6625 * ada-lang.c (ada_delta): Change the type of numerators and
6626 denominators to DOUBLEST, as they may not fit into a long.
6627 (scaling_factor): Ditto.
6629 2009-03-12 Jerome Guitton <guitton@adacore.com>
6631 * language.c (lang_bool_type): Set lai->bool_type_symbol to NULL.
6633 2009-03-12 Joel Brobecker <brobecker@adacore.com>
6635 * ada-lang.c (ada_evaluate_subexp) [OP_VAR_VALUE]: For tagged
6636 types, if we are unable to determine the actual symbol type
6637 from its tag, then use the static approximation instead.
6639 2009-03-12 Joel Brobecker <brobecker@adacore.com>
6641 Fix crash printing packed record with packed array.
6643 * ada-lang.c (ada_modulus_from_name): New function.
6644 (ada_modulus): In the case where the type length is bigger than
6645 the size of the type used to hold the bounds, try determining
6646 the modulus from the type name.
6647 (ada_value_primitive_packed_val): Fix bug in the computation of
6648 ntarg causing an out-of-buffer invalid access.
6650 2009-03-12 Joel Brobecker <brobecker@adacore.com>
6652 Fix segfault when printing short_integer'last.
6654 * ada-lang.c (ada_find_any_type): Search in the primitive types
6655 if a symbol could not be found.
6657 2009-03-12 Joel Brobecker <brobecker@adacore.com>
6659 * ada-tasks.c (task_states,long_task_states): Add new states
6660 Activating and Acceptor_Delay_Sleep. Update the description
6661 of state Acceptor_Sleep.
6663 2009-03-12 Jonas Maebe <jonas.maebe@elis.ugent.be> (obvious change)
6665 Fix a build failure on Darwin following some changes in
6666 the profile of some target_ops methods.
6668 * darwin-nat.c (darwin_kill_inferior): Add target_ops parameter
6670 (darwin_stop_inferior, darwin_detach): Likewise.
6672 2009-03-12 Vladimir Prus <vladimir@codesourcery.com>
6674 Include token in ^running notification for CLI commands.
6676 * mi/mi-main.c (mi_execute_command): Set current_token here.
6677 (mi_cmd_execute): Do not set current_token here.
6679 2009-03-12 Vladimir Prus <vladimir@codesourcery.com>
6683 * mi/mi-main.c (mi_print_timing_maybe): New.
6684 (captured_mi_execute_command): Simplify. Output timings to
6686 (mi_execute_async_cli_command): Do not print timings.
6687 * mi/mi-main.h (mi_print_timing_maybe): Declare.
6688 * mi/mi-interp.c (mi_on_normal_stop): Call mi_print_timing_maybe.
6690 2009-03-12 Jerome Guitton <guitton@adacore.com>
6692 * xcoffread.c (process_linenos): Check if the line in the
6693 include table refers to the main source file and, if so,
6694 add them to the main subfile.
6696 2009-03-12 Joel Brobecker <brobecker@adacore.com>
6698 Fix a build failure on AIX introduced after a change in the profile
6699 of some of the "methods" in the target_ops structure.
6700 * aix-thread.c: Add missing target_ops parameter throughout.
6702 Implement Ada task switching on AIX.
6703 * aix-thread.c (aix_thread_get_ada_task_ptid): New function.
6704 (init_aix_thread_ops): Set aix_thread_ops.to_get_ada_task_ptid.
6706 2009-03-11 Daniel Jacobowitz <dan@codesourcery.com>
6708 * breakpoint.c (bpstat_check_breakpoint_conditions): Use
6709 value_mark and value_free_to_mark.
6710 * objfiles.c (free_objfile): Call objfile_free_data before
6713 2009-03-10 Hui Zhu <teawater@gmail.com>
6715 * disasm.c (gdb_disassembly): Remove unused argument
6717 * disasm.h (gdb_disassembly): Ditto.
6718 * cli/cli-cmds.c (print_disassembly): Ditto.
6719 * mi/mi-cmd-disas.c (mi_cmd_disassemble): Ditto.
6721 2009-03-09 Paul Pluzhnikov <ppluzhnikov@google.com>
6723 * solib.c (solib_contains_address_p): New function.
6724 (solib_name_from_address): Use it.
6725 * printcmd.c (display_uses_solib_p): Use it.
6726 * solib.h (solib_contains_address_p): Declare it.
6728 2009-03-09 Jan Kratochvil <jan.kratochvil@redhat.com>
6730 * varobj.c (free_variable): Call value_free.
6732 2009-03-09 Jan Kratochvil <jan.kratochvil@redhat.com>
6735 * dwarf2read.c (dwarf_decode_macros): New variable `at_commandline'.
6736 Move the variable `macinfo_type' out of the loop. Create a new
6737 processing pass before the current one to pre-create `current_file'.
6738 New complaint on misplaced zero/non-zero definitions/includes.
6739 Skip first DW_MACINFO_start_file with `at_commandline' set.
6741 2008-03-09 Vladimir Prus <vladimir@codesourcery.com>
6743 * solib.c (reload_shared_libraries): Give
6744 inferior a chance to reset solib breakpoint.
6747 2009-03-08 Christopher Faylor <me+cygwin@cgf.cx>
6749 * windows-nat.c (dr): Redefine to use largest possible integer which
6751 (cygwin_set_dr): Avoid coercion.
6753 2009-03-08 Oswald Buddenhagen <oswald.buddenhagen@trolltech.de>
6755 * windows-nat.c (windows_create_inferior): Implement --tty handling on
6758 2009-03-06 Paul Pluzhnikov <ppluzhnikov@google.com>
6760 Rename solib_address to solib_name_from_address.
6761 * breakpoint.c (insert_bp_location, disable_breakpoints_in_shlibs)
6762 (disable_breakpoints_in_unloaded_shlib): Update.
6763 * printcmd.c (display_uses_solib_p): Likewise.
6764 * stack.c (print_frame): Likewise.
6768 2009-03-05 Paul Pluzhnikov <ppluzhnikov@google.com>
6770 * printcmd.c (do_one_display): Reparse exp_string.
6771 (display_uses_solib_p): New function.
6772 (clear_dangling_display_expressions): New function.
6773 (_initialize_printcmd): Add observer.
6774 * solib.c (no_shared_libraries): Swap order of calls to
6775 clear_solib and objfile_purge_solibs.
6777 2009-03-05 Joel Brobecker <brobecker@adacore.com>
6779 Implement the target-specific part of Ada tasking support
6782 * dec-thread.c (dec_thread_get_ada_task_ptid): New function.
6783 (init_dec_thread_ops): Set the to_get_ada_task_ptid method.
6785 2009-03-05 Joel Brobecker <brobecker@adacore.com>
6787 Get rid of the global "base_target" and use "find_target_beneath"
6788 to find the underlying target.
6789 * dec-thread.c (base_target): Delete.
6790 (enable_dec_thread): Remove assignement to base_target.
6791 (dec_thread_detach, dec_thread_wait, dec_thread_wait)
6792 (dec_thread_fetch_registers, dec_thread_store_registers)
6793 (dec_thread_mourn_inferior, dec_thread_pid_to_str):
6794 Update the function profile if necessary.
6795 Use find_target_beneath to call the same method but from
6796 the underlying target, removing the need for "base_target".
6798 * dec-thread.c (dec_thread_get_regsets, dec_thread_set_regsets):
6799 Fix a copy/paste error in a few debug traces...
6801 * solib-osf.c (init_so): Use a simpler method for computing
6802 the size of lm_info structure. This also gets rid of warning
6803 emitted by the compiler.
6805 2009-03-05 Pedro Alves <pedro@codesourcery.com>
6807 * breakpoint.c (check_duplicates_for): Skip permanent breakpoints
6808 duplicates of permanent breakpoints.
6810 2009-03-04 Pedro Alves <pedro@codesourcery.com>
6812 * inferior.h (notice_new_inferior): Declare.
6813 * infcmd.c (notice_new_inferior): New.
6814 * remote.c (remote_add_inferior, remote_add_thread): New.
6815 (notice_new_inferiors): Rename to...
6816 (remote_notice_new_inferior): ... this. Add RUNNING argument.
6817 Use remote_add_thread instead of add_thread, passing it the
6818 RUNNING argument. Add an inferior with remote_add_inferior. If
6819 we just learned about an inferior, call notice_new_inferior.
6820 (record_currthread): Adjust.
6821 (remote_threads_info): Adjust to use remote_notice_new_inferior.
6822 (remote_start_remote, extended_remote_attach_1): Use
6823 remote_add_inferior.
6824 (process_stop_reply): Adjust. Call remote_notice_new_inferior
6825 after handling expedited registers and watchpoint state.
6826 (extended_remote_create_inferior_1): Use remote_add_inferior.
6828 2009-03-04 Aleksandar Ristovski <aristovski@qnx.com>
6830 * infcmd.c (registers_info): Remove register number case.
6832 2009-03-03 Pedro Alves <pedro@codesourcery.com>
6834 * top.c (quit_target): Check for target_has_execution before
6835 killing or detaching from inferiors.
6837 2009-03-02 Joel Brobecker <brobecker@adacore.com>
6839 Remove some unused routines.
6841 * ada-lang.c (is_suppressed_name, ada_suppress_symbol_printing):
6843 * ada-lang.c (ada_task_list_iterator_ftype)
6844 (iterate_over_live_ada_tasks): Delete.
6845 * ada-tasks.c (ada_get_environment_task, iterate_over_live_ada_tasks):
6848 2009-03-01 Doug Evans <dje@google.com>
6850 * symtab.c: Remove trailing whitespace throughout the file.
6851 (expand_line_sal): Fix some typos and whitespace.
6853 * Makefile.in (clean): rm -f $(DEPDIR)/*.
6855 * Makefile.in (GDB_CFLAGS): Add -I$(srcdir)/common.
6856 (init.c): signals/ -> common/.
6857 (signals.o): Update.
6858 * target.h (target_signal_to_string,target_signal_to_string)
6859 (target_signal_from_name,target_signal_to_host_p)
6860 (target_signal_from_host,target_signal_to_host): Move to ...
6861 * common/gdb_signals.h: ... here. New file.
6862 * common/signals.c: Moved here from signals/signals.c.
6863 #include gdb_signals.h, remove #include of target.h in gdb case.
6864 (target_signal_from_command,default_target_signal_to_host)
6865 (default_target_signal_from_host): Move inside #ifndef GDBSERVER.
6867 Include thread ID in target_wait debugging output.
6868 * infrun.c (print_target_wait_results): New function.
6869 (wait_for_inferior,fetch_inferior_event): Call it.
6871 2009-02-27 Pedro Alves <pedro@codesourcery.com>
6873 * gdb_proc_service.h (struct ps_prochandle): Replace pid_t field
6874 with a ptid_t field.
6875 * linux-thread-db.c (thread_get_info_callback): Build the ptid
6876 using the pid stored in proc_handle.ptid.
6877 (thread_from_lwp, thread_db_attach_lwp, enable_thread_event)
6878 (check_for_thread_db, thread_db_detach, check_event)
6879 (thread_db_mourn_inferior, find_new_threads_callback)
6880 (thread_db_find_new_threads_1): Adjust.
6881 * proc-service.c (ps_xfer_memory, ps_lgetregs, ps_lsetregs)
6882 (ps_lgetfpregs, ps_lsetfpregs, ps_getpid): Adjust.
6884 2009-02-27 Phil Muldoon <pmuldoon@redhat.com>
6886 * valprint.c (read_string): Rework clean-up logic. Use
6887 free_current_contents to clean-up buffer.
6889 2009-02-27 Andreas Schwab <schwab@linux-m68k.org>
6891 * MAINTAINERS: Update e-mail address.
6893 2009-02-26 Phil Muldoon <pmuldoon@redhat.com>
6895 * python/python-utils.c (python_string_to_unicode): Always return
6897 (python_string_to_target_string): Decrement transient python
6899 (python_string_to_host_string): Likewise.
6901 2007-02-26 Pedro Alves <pedro@codesourcery.com>
6903 * mips-linux-nat.c (mips64_linux_fetch_registers): Pass `ops' to
6904 call to super_fetch_registers.
6905 (mips64_linux_store_registers): Pass `ops' to call to
6906 super_store_registers.
6908 2009-02-25 Doug Evans <dje@google.com>
6910 * breakpoint.c (insert_bp_location): Add \n to overlay breakpoint
6913 * breakpoint.c (disable_breakpoints_in_shlibs): Delete local
6914 disabled_shlib_breaks, unused.
6916 * printcmd.c (build_address_symbolic): Fix comment.
6918 2009-02-25 Hui Zhu <teawater@gmail.com>
6920 * cli/cli-script.c (define_command): Add _() to query.
6921 * gnu-nat.c (inf_validate_task_sc): Ditto.
6922 * infcmd.c (kill_if_already_running): Ditto.
6923 (jump_command): Ditto.
6924 (attach_command): Ditto.
6925 * inflow.c (kill_command): Ditto.
6926 * infrun.c (handle_command): Ditto.
6927 * maint.c (maintenance_dump_me): Ditto.
6928 * memattr.c (mem_delete_command): Ditto.
6929 * monitor.c (monitor_interrupt_query): Ditto.
6930 * nto-procfs.c (interrupt_query): Ditto.
6931 * printcmd.c (undisplay_command): Ditto.
6932 * remote-mips.c (mips_kill): Ditto.
6933 * remote.c (interrupt_query): Ditto.
6934 * solib-irix.c (irix_open_symbol_file_object): Ditto.
6935 * solib-osf.c (osf_open_symbol_file_object): Ditto.
6936 * solib-pa64.c (pa64_open_symbol_file_object): Ditto.
6937 * solib-som.c (som_open_symbol_file_object): Ditto.
6938 * solib-svr4.c (open_symbol_file_object): Ditto.
6939 * symfile.c (symbol_file_add_with_addrs_or_offsets): Ditto.
6940 * target.c (kill_or_be_killed): Ditto.
6941 * tracepoint.c (delete_trace_command): Ditto.
6942 * top.c (quit_confirm): Add _() to s that will be used
6945 2009-02-24 Pierre Muller <muller@ics.u-strasbg.fr>
6947 Fix windows-nat.c compilation failure.
6949 * windows-nat.c (windows_thread_alive): Fix forward declaration.
6950 (get_windows_debug_event): Add ops parameter to call to windows_resume.
6952 2009-02-23 Pedro Alves <pedro@codesourcery.com>
6954 * remote-sim.c (gdbsim_resume): Add target_ops* argument.
6956 2009-02-23 Jay Krell <jay.krell@cornell.edu> (tiny change)
6958 * symtab.c (find_line_symtab): Initialize exact to avoid
6961 2009-02-23 Pedro Alves <pedro@codesourcery.com>
6963 * i386-linux-nat.c (i386_linux_fetch_inferior_registers): Pass
6964 `ops' to recursive call.
6966 2009-02-23 Pedro Alves <pedro@codesourcery.com>
6968 * corelow.c (get_core_registers): Adjust.
6969 (core_file_thread_alive): Rename to...
6970 (core_thread_alive): ... this.
6971 (core_pid_to_str): Try gdbarch_core_pid_to_str first.
6972 (init_core_ops): Adjust.
6973 (coreops_suppress_target): Delete.
6974 (_initialize_corelow): Unconditionally add core_ops.
6975 * procfs.c: Include "inf-child.h".
6976 (procfs_ops): Delete.
6977 (init_procfs_ops): Delete. Reimplement as...
6978 (procfs_target): ... this, inheriting from inf-child.
6979 (procfs_attach, procfs_detach, procfs_fetch_registers): Adjust.
6980 (procfs_prepare_to_store): Delete.
6981 (procfs_store_registers, procfs_resume): Adjust.
6982 (procfs_open): Delete.
6983 (procfs_suppress_run): Delete.
6984 (procfs_can_run): Delete.
6985 (procfs_mourn_inferior): Adjust.
6986 (procfs_init_inferior): Add target_ops parameter. Adjust.
6987 (procfs_create_inferior): Don't pass procfs_init_inferior to
6988 fork_inferior. Instead call it after fork_inferior returns.
6989 (procfs_find_new_threads): Adjust.
6990 (_initialize_procfs): Adjust to use procfs_target instead of
6992 * sol-thread.c (orig_core_ops, sol_core_ops): Delete.
6993 (lwp_to_thread): Use target_thread_alive.
6994 (sol_thread_open): Delete.
6995 (sol_thread_attach): Delete.
6996 (sol_thread_detach, sol_thread_resume, sol_thread_wait)
6997 (sol_thread_fetch_registers, sol_thread_store_registers): Adjust
6998 to use find_target_beneath.
6999 (sol_thread_prepare_to_store, sol_thread_xfer_memory): Delete.
7000 (sol_thread_xfer_partial): Adjust to use find_target_beneath.
7001 (sol_thread_files_info, sol_thread_kill_inferior): Delete.
7002 (check_for_thread_db): New.
7003 (sol_thread_notice_signals, sol_thread_create_inferior): Delete.
7004 (sol_thread_new_objfile): Call check_for_thread_db.
7005 (sol_thread_mourn_inferior): Adjust to use find_target_beneath.
7006 (sol_thread_can_run): Delete.
7007 (sol_thread_alive): Adjust to use find_target_beneath.
7008 (sol_thread_stop): Delete.
7009 (rw_common): Use target_write_memory or target_read_memory.
7010 (ps_lgetregs, ps_lgetfpregs): Use target_fetch_registers.
7011 (ps_lsetregs, ps_lsetfpregs): Use target_store_registers.
7012 (solaris_pid_to_str): Remove check for libthread_db initialization
7014 (sol_find_new_threads): Remove check for libthread_db
7015 initialization failing, or for an invalid inferior_ptid. Adjust
7016 to use find_target_beneath.
7017 (sol_core_open, sol_core_close, sol_core_detach,
7018 sol_core_files_info, sol_find_memory_regions,
7019 sol_make_note_section, ignore): Delete.
7020 (init_sol_thread_ops): Make it a thread_stratum target. Remove
7021 unneeded callback settings.
7022 (init_sol_core_ops): Delete.
7023 (_initialize_sol_thread): No longer call init_sol_core_ops, set
7024 procfs_suppress_run, or hack with core_ops.
7026 * target.h (struct target_ops): Add a target_ops * parameter to
7027 to_resume, to_fetch_registers, to_store_registers, to_thread_alive
7028 and to_find_new_threads.
7029 (target_fetch_registers, target_store_registers)
7030 (target_thread_alive, target_find_new_threads): Redeclare as
7033 * target.c (update_current_target): Do not inherit or de_fault
7034 to_resume, to_fetch_registers, to_store_registers,
7035 to_thread_alive, to_find_new_threads.
7036 (target_resume): Adjust.
7037 (target_thread_alive, target_find_new_threads): New.
7038 (debug_to_resume, debug_to_fetch_registers): Delete.
7039 (target_fetch_registers): New.
7040 (debug_to_store_registers): Delete.
7041 (target_store_registers): New.
7042 (debug_to_thread_alive, debug_to_find_new_threads): Delete.
7043 (setup_target_debug): Adjust.
7045 * gdbcore.h (core_ops): Delete declaration.
7047 * inf-ptrace.c, linux-nat.c, remote.c, amd64-linux-nat.c,
7048 inf-child.c, linux-thread-db.c, bsd-uthread.c, inf-ttrace.c,
7049 i386-sol2-tdep.c, darwin-nat.c, gnu-nat.c, go32-nat.c,
7050 hpux-thread.c, i386-linux-nat.c, i386fbsd-nat.c, monitor.c,
7051 nto-procfs.c, remote-m32r-sdi.c, remote-mips.c, windows-nat.c,
7052 alphabsd-nat.c, amd64bsd-nat.c, arm-linux-nat.c, armnbsd-nat.c,
7053 bsd-kvm.c, hppa-hpux-nat.c, hppa-linux-nat.c, hppabsd-nat.c,
7054 hppanbsd-nat.c, i386-darwin-nat.c, i386bsd-nat.c,
7055 ia64-linux-nat.c, m32r-linux-nat.c, m68kbsd-nat.c,
7056 m68klinux-nat.c, m88kbsd-nat.c, mips-linux-nat.c,
7057 mips64obsd-nat.c, mipsnbsd-nat.c, ppc-linux-nat.c, ppcnbsd-nat.c,
7058 ppcobsd-nat.c, remote-sim.c, rs6000-nat.c, s390-nat.c,
7059 shnbsd-nat.c, sparc-nat.c, sparc-nat.h, spu-linux-nat.c,
7060 vaxbsd-nat.c, xtensa-linux-nat.c: Adjust to target_ops changes.
7062 * gdbarch.sh (core_pid_to_str): New gdbarch callback.
7063 * gdbarch.h, gdbarch.c: Regenerate.
7065 * sol2-tdep.c: Include "inferior.h".
7066 (sol2_core_pid_to_str): New.
7067 * sol2-tdep.h (sol2_core_pid_to_str): Declare.
7069 * amd64-sol2-tdep.c (amd64_sol2_init_abi): Set it.
7070 * sparc-sol2-tdep.c (sparc32_sol2_init_abi): Set it.
7071 * sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Set it.
7072 * i386-sol2-tdep.c (i386_sol2_init_abi): Set it.
7074 2009-02-22 Doug Evans <dje@google.com>
7076 * exec.c (exec_file_attach): Fix comment.
7078 2009-02-22 Pedro Alves <pedro@codesourcery.com>
7080 Silence a few -Wmissing-prototypes warnings.
7083 * alpha-linux-tdep.c (alpha_linux_regset_from_core_section): Make
7085 * alpha-osf1-tdep.c (_initialize_alpha_osf1_tdep): Declare.
7086 * amd64fbsd-tdep.c (amd64fbsd_init_abi): Make it static.
7087 * amd64nbsd-tdep.c (_initialize_amd64nbsd_ndep): Rename to ...
7088 (_initialize_amd64nbsd_tdep): ... this.
7089 * arm-linux-tdep.c (arm_linux_software_single_step): Make it static.
7090 (_initialize_arm_linux_tdep): Declare.
7091 * armbsd-tdep.c (armbsd_fpreg_offset): Make it static.
7092 * armnbsd-tdep.c (_initialize_arm_netbsd_tdep): Declare.
7093 * armobsd-tdep.c (_initialize_armobsd_tdep): Declare.
7094 * avr-tdep.c (avr_return_value): Make it static.
7095 (avr_frame_unwind_cache): Ditto.
7096 * bsd-uthread.c (bsd_uthread_inferior_created): Ditto.
7097 (bsd_uthread_solib_loaded): Ditto.
7098 (bsd_uthread_solib_unloaded): Ditto.
7099 (bsd_uthread_target): Ditto.
7100 (_initialize_bsd_uthread): Declare.
7101 * cris-tdep.c (crisv32_single_step_through_delay): Make it static.
7102 (cris_frame_unwind_cache): Ditto.
7103 * frv-tdep.c (frv_return_value): Ditto.
7104 * h8300-tdep.c (h8300_use_struct_convention): Ditto.
7105 (h8300h_use_struct_convention): Ditto.
7106 * hppa-tdep.c (hppa_sign_extend, hppa_low_hppa_sign_extend):
7108 * hppa-tdep.h (hppa_low_sign_extend, hppa_sign_extend): Delete
7110 * hppabsd-tdep.c: Include hppabsd-tdep.h.
7111 (hppabsd_find_global_pointer): Make it static.
7112 * hppabsd-tdep.h: New.
7113 * hppanbsd-tdep.c: Include hppabsd-tdep.h.
7114 (hppabsd_init_abi): Remove declaration.
7115 (_initialize_hppabsd_tdep): Remove declaration.
7116 (_initialize_hppanbsd_tdep): Declare.
7117 * hppaobsd-tdep.c: Include hppabsd-tdep.h.
7118 (hppabsd_init_abi): Delete declaration.
7119 (hppaobsd_init_abi): Make it static.
7120 * i386-nto-tdep.c (_initialize_i386nto_tdep): Declare.
7121 * i386nbsd-tdep.c (_initialize_i386nbsd_tdep): Declare.
7122 * ia64-linux-tdep.c (_initialize_ia64_linux_tdep): Declare.
7123 * ia64-tdep.c (ia64_register_reggroup_p): Make it static.
7124 * iq2000-tdep.c (_initialize_iq2000_tdep): Declare.
7125 * m32c-tdep.c (m32c_register_reggroup_p): Make it static.
7126 (m32c_analyze_prologue, m32c_virtual_frame_pointer): Ditto.
7127 (_initialize_m32c_tdep): Declare.
7128 * m32r-rom.c (_initialize_m32r_rom): Declare.
7129 * m32r-tdep.c (m32r_skip_prologue): Make it static.
7130 (m32r_return_value): Ditto.
7131 * m68hc11-tdep.c (m68hc11_frame_unwind_cache): Make it static.
7132 (m68hc11_return_value): Ditto.
7133 * m68klinux-tdep.c (_initialize_m68k_linux_tdep): Declare.
7134 * m88k-tdep.c (m88k_frame_cache): Make it static.
7135 * mep-tdep.c (mep_gdb_print_insn): Ditto.
7136 (mep_return_value): Ditto.
7137 (_initialize_mep_tdep): Declare.
7138 * mips-irix-tdep.c (_initialize_mips_irix_tdep): Declare.
7139 * mips-linux-tdep.c (supply_64bit_reg): Make it static.
7140 (mips_linux_syscall_next_pc): Ditto.
7141 (_initialize_mips_linux_tdep): Declare.
7142 * mips-tdep.c (mips_single_step_through_delay): Make it static.
7143 * mipsnbsd-tdep.c (_initialize_mipsnbsd_tdep): Declare.
7144 * mn10300-linux-tdep.c (_initialize_mn10300_linux_tdep): Declare.
7145 * mn10300-tdep.c (_initialize_mn10300_tdep): Declare.
7146 * mt-tdep.c (_initialize_mt_tdep): Declare.
7147 * nbsd-tdep.c: Include nbsd-tdep.h.
7148 * nto-tdep.c (find_load_phdr): Make it static.
7149 (_initialize_nto_tdep): Declare.
7150 * ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Make it
7152 (_initialize_ppc_linux_tdep): Declare.
7153 * remote-m32r-sdi.c (m32r_can_use_hw_watchpoint)
7154 (m32r_insert_watchpoint, m32r_remove_watchpoint)
7155 (m32r_stopped_data_address, m32r_stopped_by_watchpoint): Make
7157 * rs6000-aix-tdep.c (_initialize_rs6000_aix_tdep): Declare.
7158 * rs6000-nat.c: Include xcoffread.h.
7159 (find_toc_address): Don't extern declare get_toc_offset. Adjust
7160 to call xcoff_get_to_offset.
7161 * rs6000-tdep.c (ppc_vsx_support_p, ppc_displaced_step_fixup)
7162 (rs6000_skip_main_prologue, rs6000_in_solib_return_trampoline)
7163 (rs6000_skip_trampoline_code): Make static.
7164 * s390-tdep.c (s390_regset_from_core_section): Ditto.
7165 * sh-tdep.c (sh_register_reggroup_p): Ditto.
7166 * shnbsd-tdep.c (shnbsd_regset_from_core_section): Ditto.
7167 (_initialize_shnbsd_tdep): Declare.
7168 * solib-frv.c (displacement_from_map): Make static.
7169 (_initialize_frv_solib): Declare.
7170 * solib-irix.c (fetch_lm_info): Make static.
7171 (_initialize_irix_solib): Declare.
7172 * solib-som.c: Include solib-som.h.
7173 (som_solib_select): Line break.
7174 * sparc-tdep.c (sparc_regset_from_core_section): Make static.
7175 * sparcnbsd-tdep.c (_initialize_sparnbsd_tdep): Rename to ...
7176 (_initialize_sparcnbsd_tdep): ... this.
7177 * spu-tdep.c (spu_software_single_step): Make it static.
7178 (_initialize_spu_tdep): Declare.
7179 * vax-tdep.c (vax_frame_cache): Make it static.
7180 * xcoffread.c: Include xcoffread.h.
7181 (get_toc_offset): Rename to ...
7182 (xcoff_get_toc_offset): ... this.
7183 (_initialize_xcoffread): Declare.
7185 * xtensa-linux-tdep.c (_initialize_xtensa_linux_tdep): Declare.
7186 * xtensa-tdep.c (xtensa_skip_prologue, xtensa_derive_tdep): Make
7188 (_initialize_xtensa_tdep): Declare.
7190 2008-02-21 Pedro Alves <pedro@codesorcery.com>
7192 Silence a few -Wmissing-prototypes warnings.
7195 * amd64-nat.c: Include "amd64-nat.h".
7196 * fork-child.c (_initialize_fork_child): Ditto.
7197 * gcore.c (_initialize_gcore): Ditto.
7198 * inf-ptrace.c: Include "inf-ptrace.h".
7199 (inf_ptrace_store_registers): Make it static.
7200 * linux-nat.c (linux_nat_terminal_ours): Make it static.
7201 (_initialize_linux_nat): Declare before definition.
7202 * linux-tdep.c: Include "linux-tdep.h".
7203 * linux-thread-db.c (_initialize_thread_db): Declare before
7205 * proc-service.c (_initialize_proc_service): Ditto.
7206 * remote.c (remote_send_printf): Make it static.
7207 * solib.c: Include "solib.h".
7208 * symfile-mem.c (_initialize_symfile_mem): Declare before
7210 * ada-lang.c (ada_la_decode, ada_match_name)
7211 (ada_suppress_symbol_printing, ada_is_array_type)
7212 (ada_value_ptr_subscript, ada_array_length)
7213 (ada_to_static_fixed_value): Make them static.
7214 (_initialize_ada_language): Declare before definition.
7215 * ada-tasks.c (ada_get_task_number, ada_get_environment_task)
7216 (ada_task_list_changed, ada_new_objfile_observer): Make them
7218 (_initialize_tasks): Declare before definition.
7219 * addrmap.c (_initialize_addrmap): Declare before definition.
7220 * auxv.c (default_auxv_parse): Make it static.
7221 * bfd-target.c (target_bfd_xfer_partial, target_bfd_xclose): Make
7223 * breakpoint.c (remove_sal): Add line break.
7224 (expand_line_sal_maybe): Make it static.
7225 * cp-name-parser.y: Include "cp-support.h".
7226 * cp-valprint.c (cp_find_class_member): Make it static.
7227 * eval.c (value_f90_subarray): Ditto.
7228 * exceptions.c (print_any_exception): Ditto.
7229 * findcmd.c (_initialize_mem_search): Declare before definition.
7230 * frame.c (frame_observer_target_changed): Make it static.
7231 * gnu-v3-abi.c (gnuv3_find_method_in): Make it static.
7232 * inf-child.c: Include "inf-child.h".
7233 * inferior.h (valid_inferior_id): Rename to ...
7234 (valid_gdb_inferior_id): ... this.
7235 * infrun.c (infrun_thread_stop_requested, siginfo_make_value):
7237 * jv-lang.c (java_language_arch_info): Make it static.
7238 * m2-typeprint.c (m2_get_discrete_bounds): Ditto.
7239 * osdata.c (info_osdata_command): Make it static.
7240 * regcache.c (regcache_observer_target_changed): Make it static.
7241 * reverse.c (_initialize_reverse): Declare before definition.
7242 * stabsread.c (cleanup_undefined_types_noname)
7243 (cleanup_undefined_types_1): Make them static.
7244 * symfile.c (place_section): Make it static.
7245 * symtab.c (find_pc_sect_psymtab_closer): Make it static.
7246 * target-descriptions.c (_initialize_target_descriptions): Declare
7248 * target.c (default_get_ada_task_ptid, find_default_can_async_p)
7249 (find_default_is_async_p, find_default_supports_non_stop): Make
7251 (target_supports_non_stop): Add prototype.
7252 (dummy_pid_to_str): Make it static.
7253 * utils.c (_initialize_utils): Declare before definition.
7254 * ada-exp.y (_initialize_ada_exp): Declare before definition.
7255 * solib-svr4.c (HAS_LM_DYNAMIC_FROM_LINK_MAP): Add a prototype.
7256 * target.h (struct target_ops): Add a prototype to the
7257 to_can_execute_reverse callback.
7258 * macroscope.c (_initialize_macroscope): Declare before definition.
7259 * cp-namespace.c (_initialize_cp_namespace): Declare before definition.
7260 * python/python.c (_initialize_python): Declare before definition.
7261 * tui/tui-command.c: Include "tui/tui-command.h".
7262 * tui/tui-data.c (init_content_element, init_win_info): Make them
7264 * tui/tui-disasm.c: Include "tui/tui-disasm.h".
7265 * tui/tui-interp.c (_initialize_tui_interp): Declare before
7267 * tui/tui-layout.c: Include "tui/tui-layout.h".
7268 (_initialize_tui_layout): Declare before definition.
7269 * tui/tui-regs.c: Include "tui/tui-regs.h".
7270 (tui_display_reg_element_at_line): Make it static.
7271 (_initialize_tui_regs): Declare before definition.
7272 * tui/tui-stack.c (_initialize_tui_stack): Declare before
7274 * tui/tui-win.c: Include "tui/tui-win.h".
7275 (_initialize_tui_win): Declare before definition.
7276 (tui_sigwinch_handler): Make it static. Wrap in ifdef SIGWINCH.
7277 * tui/tui-win.h (tui_sigwinch_handler): Delete declaration.
7278 (tui_get_cmd_list): Add a prototype.
7279 * tui/tui-windata.c: Include tui-windata.h.
7280 * tui/tui-wingeneral.c (box_win): Make it static.
7281 * cli/cli-logging.c (show_logging_command): Make it static.
7282 (_initialize_cli_logging): Declare before definition.
7283 * mi/mi-common.c (_initialize_gdb_mi_common): Declare before
7286 2009-02-20 Pierre Muller <muller@ics.u-strasbg.fr>
7288 Extend use of i386_use_watchpoints to all i386 native files
7289 using hardware watchpoints.
7290 * go32-nat.c (init_go32_ops): Call i386_use_watchpoints.
7291 * i386fbsd-nat.c (_initialize_i386fbsd_nat): Ditto.
7292 * windows-nat.c (init_windows_ops): Ditto.
7293 * config/i386/nm-cygwin.h: Define I386_WATCHPOINTS_IN_TARGET_VECTOR.
7294 * config/i386/nm-cygwin64.h: Ditto.
7295 * config/i386/nm-fbsd.h: Ditto.
7296 * config/i386/nm-go32.h: Ditto.
7298 2009-02-19 Joel Brobecker <brobecker@adacore.com>
7300 * ada-typeprint.c (ada_typedef_print): Remove. Unused.
7302 2009-02-18 Vladimir Prus <vladimir@codesourcery.com>
7304 * mi/mi-interp.c (mi_solib_loaded, mi_solib_unloaded): New.
7305 (mi_interpreter_init): Register the above.
7306 * solib.c (clear_solib): Notify solib unload.
7307 * breakpoint.c (disable_breakpoints_in_unloaded_shlib): Do not
7308 disable breakpoints on a.out targets.
7310 2009-02-17 Vladimir Prus <vladimir@codesourcery.com>
7312 * observer.c (observer_test_first_notification_function)
7313 (observer_test_second_notification_function)
7314 (observer_test_third_notification_function): Adjust prototype.
7316 2009-02-17 Pedro Alves <pedro@codesourcery.com>
7318 * Makefile.in (ALL_64_TARGET_OBS): Add amd64-dicos-tdep.o.
7319 (ALL_TARGET_OBS): Add dicos-tdep.o.
7320 (ALLDEPFILES): Add amd64-dicos-tdep.c and dicos-tdep.c.
7321 * configure.tgt (i[34567]86-*-dicos*): Add dicos-tdep.o to
7323 (x86_64-*-dicos*): Add dicos-tdep.o and amd64-dicos-tdep.o to
7325 * dicos-tdep.h, dicos-tdep.c: New.
7326 * amd64-dicos-tdep.c: New.
7327 * i386-dicos-tdep.c: Don't include solib.h, solib-target.h or
7328 inferior.h. Include dicos-tdep.h.
7329 (i386_dicos_init_abi): Call dicos_init_abi.
7330 (i386_dicos_bfd_has_symbol_p): Delete.
7331 (i386_dicos_osabi_sniffer): Use dicos_load_module_p.
7333 * NEWS: Mention x86-64 DICOS target support.
7335 2009-02-16 Doug Evans <dje@google.com>
7337 * amd64-tdep.c (amd64_skip_prefixes): Renamed from skip_prefixes.
7338 All callers updated.
7339 (amd64_get_insn_details): Handle more 3-byte opcode insns.
7340 (amd64_breakpoint_p): Delete.
7341 (amd64_displaced_step_fixup): When fixing up after stepping an int3,
7342 don't back up pc to the start of the int3.
7343 * i386-tdep.c: #include opcode/i386.h.
7344 (i386_skip_prefixes): New function.
7345 (i386_absolute_jmp_p): Constify argument.
7346 (i386_absolute_call_p,i386_ret_p,i386_call_p,i386_syscall_p): Ditto.
7347 (i386_breakpoint_p): Delete.
7348 (i386_displaced_step_fixup): Handle unnecessary or redundant prefixes.
7349 When fixing up after stepping an int3, don't back up pc to the start
7352 2009-02-16 Pedro Alves <pedro@codesourcery.com>
7354 * corelow.c (core_close): Don't hardcode the core's pid.
7355 (core_open): Find core threads before calling
7356 post_create_inferior.
7357 (add_to_thread_list, get_core_register_section): Take into account
7358 systems where the regset section names encode the pid of the
7361 * gdbarch.sh (core_reg_section_encodes_pid): New gdbarch setting.
7362 * gdbarch.h, gdbarch.c: Regenerate.
7364 * amd64-sol2-tdep.c (amd64_sol2_init_abi): Set it.
7365 * i386-sol2-tdep.c (i386_sol2_init_abi): Set it.
7366 * sparc-sol2-tdep.c (sparc32_sol2_init_abi): Set it.
7367 * sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Set it.
7369 2009-02-14 Vladimir Prus <vladimir@codesourcery.com>
7371 Include frame information for *stopped due to CLI commands.
7373 * ada-tasks.c (ada_normal_stop_observer): Adjust prototype.
7374 * infcmd.c (finish_command_continuation): Pass '1' for
7375 'print_frame' parameter to the observer.
7376 * infrun.c (normal_stop): Don't print mi-specific information
7377 here. Pass 'stop_print_frame' to the 'print_frame' parameter
7379 * mi/mi-interp.c (mi_on_normal_stop): Adjust prototype.
7380 If we need to print frame, and current uiout is not the MI one,
7383 2009-02-13 Pierre Muller <muller@ics.u-strasbg.fr>
7385 * xtensa-tdep.c (call0_analyze_prologue): Delete BSZ macro.
7386 Replace BSZ macro uses by XTENSA_ISA_BSZ macro.
7388 2009-02-12 Jan Kratochvil <jan.kratochvil@redhat.com>
7391 * dwarf2read.c (process_die <DW_TAG_module>, read_module)
7392 (scan_partial_symbols <DW_TAG_module>, add_partial_module): New.
7394 2009-02-11 Pierre Muller <muller@ics.u-strasbg.fr>
7396 * dwarf2read.c (read_base_type): Set code to TYPE_CODE_CHAR
7397 for DW_ATE_signed_char and DW_ATE_unsigned_char
7398 for pascal language.
7400 2009-02-11 Jim Meyering <meyering@redhat.com>
7401 Jan Kratochvil <jan.kratochvil@redhat.com>
7403 Avoid NULL dereference.
7404 * stack.c (return_command): Guard use of SYMBOL_TYPE (thisfun).
7405 New variable func_type.
7407 2009-02-11 Pedro Alves <pedro@codesourcery.com>
7409 * gdbarch.c: Regenerate.
7411 2009-02-10 Pierre Muller <muller@ics.u-strasbg.fr>
7413 * p-lang.c (is_pascal_string_type): Fix comment.
7414 Determine exact size of char elements for GPC
7416 (pascal_printstr): Handle char width of 2 or 4.
7417 * p-valprint.c (pascal_val_print): Handle char
7420 2009-02-07 Daniel Jacobowitz <dan@codesourcery.com>
7422 * dwarf2read.c (dwarf2_build_psymtabs_hard): Move lowpc and highpc
7423 inside the loop. Only call addrmap_set_empty if the compilation unit
7424 had DW_AT_high_pc and DW_AT_low_pc. Update call to
7425 scan_partial_symbols.
7426 (scan_partial_symbols): Take NEED_PC argument and pass it along with
7428 (add_partial_namespace): Take NEED_PC argument and pass it through.
7429 (add_partial_subprogram): Take NEED_PC argument. Update the addrmap
7432 2009-02-07 Pedro Alves <pedro@codesourcery.com>
7434 * NEWS: Mention inspecting extra signal information, $_siginfo,
7435 and the qXfer:siginfo:read and qXfer:siginfo:write packets.
7437 2009-02-07 Pedro Alves <pedro@codesourcery.com>
7439 * linux-nat.c (PTRACE_SETSIGINFO): Define if PTRACE_GETSIGINFO
7442 2009-02-06 Pedro Alves <pedro@codesourcery.com>
7444 * amd64-linux-nat.c (compat_int_t, compat_uptr_t, compat_time_t)
7445 (compat_timer_t, compat_clock_t, struct compat_timeval)
7446 (compat_sigval_t, compat_siginfo_t): New types.
7447 (cpt_si_pid, cpt_si_uid, cpt_si_timerid, cpt_si_overrun)
7448 (cpt_si_status, cpt_si_utime, cpt_si_stime, cpt_si_ptr)
7449 (cpt_si_addr, cpt_si_band, cpt_si_fd): New defines.
7450 (compat_siginfo_from_siginfo, siginfo_from_compat_siginfo)
7451 (amd64_linux_siginfo_fixup): New.
7452 * linux-nat.c (linux_nat_siginfo_fixup): New.
7453 (siginfo_fixup): New.
7454 (linux_xfer_siginfo): Use siginfo_fixup to convert between the
7455 siginfo layout expected by ptrace and the siginfo layout of the
7457 (linux_nat_set_siginfo_fixup): New.
7458 * linux-nat.h (linux_nat_set_siginfo_fixup): Declare.
7460 2009-02-06 Pedro Alves <pedro@codesourcery.com>
7462 * target.h (enum target_object): Add new TARGET_OBJECT_SIGNAL_INFO.
7463 * infrun.c (siginfo_value_read, siginfo_value_write): New.
7464 (siginfo_value_funcs): New.
7465 (siginfo_make_value): New.
7466 (_initialize_infrun): Create the $_siginfo convenience variable.
7467 * gdbtypes.h (append_composite_type_field_aligned): Declare.
7468 * gdbtypes.c (append_composite_type_field): Rename to...
7469 (append_composite_type_field_aligned): ... this. Add ALIGNMENT
7470 argument. Handle it.
7471 (append_composite_type_field): Rewrite on top of
7472 append_composite_type_field_aligned.
7473 * value.h (internalvar_make_value): New typedef.
7474 (struct internalvar) <make_value>: New field.
7475 (create_internalvar_type_lazy): Declare.
7476 * value.c (create_internalvar): Clear make_value.
7477 (create_internalvar_type_lazy): New.
7478 (value_of_internalvar): If make_value is set use it.
7479 (preserve_values): Skip internal variables that don't have a
7481 * gdbarch.sh (get_siginfo_type): New.
7482 * gdbarch.h, gdbarch.c: Regenerate.
7484 * linux-tdep.h, linux-tdep.c: New.
7485 * amd64-linux-tdep.c: Include "linux-tdep.h".
7486 (amd64_linux_init_abi): Register linux_get_siginfo_type and
7487 linux_get_siginfo_mapper.
7488 * i386-linux-tdep.c: Include "linux-tdep.h".
7489 (i386_linux_init_abi): Register linux_get_siginfo_type and
7490 linux_get_siginfo_mapper.
7491 * arm-linux-tdep.c: Include "linux-tdep.h".
7492 (i386_linux_init_abi): Register linux_get_siginfo_type and
7493 linux_get_siginfo_mapper.
7495 * linux-nat.c (linux_xfer_siginfo): New.
7496 (linux_nat_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO.
7497 * remote.c (PACKET_qXfer_siginfo_read)
7498 (PACKET_qXfer_siginfo_write): New.
7499 (feature remote_protocol_features): Add "qXfer:siginfo:read" and
7500 "qXfer:siginfo:write" features.
7501 (remote_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO.
7502 (_initialize_remote): Add "set/show remote read-siginfo-object"
7503 and "set/show remote write-siginfo-object" commands.
7505 * Makefile.in (ALL_TARGET_OBS): Add linux-tdep.o.
7506 (HFILES_NO_SRCDIR): Add linux-tdep.h.
7507 (ALLDEPFILES): Add linux-tdep.c.
7509 * configure.tgt (arm*-*-linux* | arm*-*-uclinux*)
7510 (i[34567]86-*-linux*, x86_64-*-linux*): Add linux-tdep.o to
7513 2009-02-06 Jim Blandy <jimb@codesourcery.com>
7514 Daniel Jacobowitz <dan@codesourcery.com>
7515 Vladimir Prus <vladimir@codesourcery.com>
7516 Pedro Alves <pedro@codesourcery.com>
7518 * defs.h (enum lval_type): New value: lval_computed.
7519 * value.h (struct lval_funcs): New type.
7520 (allocate_computed_value, value_computed_funcs)
7521 (value_computed_closure): New declarations.
7522 * value.c (struct value): Add a structure to the location union
7523 for computed lvalues, containing 'funcs' and 'closure' members.
7524 (allocate_computed_value, value_computed_funcs)
7525 (value_computed_closure): New functions.
7526 (value_free): For computed lvalues, call the closure's
7527 'free_closure' function before freeing the value itself.
7528 (value_copy): If we're copying an lval_computed value, call the
7529 closure's 'copy_closure' function.
7530 (set_value_component_location): If the original value is a
7531 computed lvalue, then call the closure's 'copy_closure' function.
7532 (value_of_internalvar): If an internal variable's value is a
7533 computed lvalue, make retrieving its value produce an equivalent
7535 * valops.c (value_fetch_lazy): Unlazy computed lvalues by calling
7536 their read function.
7537 (value_assign): Assign to computed lvalues by calling their write
7540 2009-02-06 Pedro Alves <pedro@codesourcery.com>
7542 * linux-nat.c (linux_nat_wait): Adjust.
7543 (linux_nat_pid_to_str): Adjust. Remove call to thread_db_init.
7544 * linux-nat.h (thread_db_init): Delete declaration.
7545 * linux-thread-db.c (target_beneath): Delete.
7546 (thread_db_init): Delete.
7547 (thread_db_detach): Use find_target_beneath.
7548 (thread_db_wait): Adjust interface. Use find_target_beneath.
7549 (thread_db_mourn_inferior): Use find_target_beneath.
7550 (thread_db_can_async_p, thread_db_is_async_p, thread_db_async)
7551 (thread_db_async_mask): Delete.
7552 (thread_db_pid_to_str): Adjust interface. Use
7553 find_target_beneath.
7554 (thread_db_get_thread_local_address): Adjust interface. Use
7555 find_target_beneath.
7556 (init_thread_db_ops): Delete references to delete functions.
7557 * target.c (update_current_target): Don't inherit or default
7558 to_wait. Don't inherit to_pid_to_str and
7559 to_get_thread_local_address.
7560 (target_translate_tls_address): Look for a pushed target that
7561 implements to_get_thread_local_address, and use it instead of
7562 checking for target_get_thread_local_address_p.
7563 (target_wait, target_pid_to_str): Reimplement as functions.
7564 (dummy_pid_to_str): New.
7565 (init_dummy_target): Register it.
7566 (debug_to_wait): Delete.
7567 * target.h (struct target_ops): Make to_wait, to_pid_to_str and
7568 to_get_thread_local_address accept a pointer to struct target_ops.
7569 (target_wait): Delete macro, and declare as function.
7570 (target_pid_to_str): Likewise.
7571 (target_get_thread_local_address)
7572 (target_get_thread_local_address_p): Delete.
7573 (noprocess): Add NORETURN and ATTR_NORETURN tags.
7574 * inf-ptrace.c (inf_ptrace_wait): Adjust.
7575 (inf_ptrace_pid_to_str): New.
7576 (inf_ptrace_target): Use inf_ptrace_pid_to_str.
7577 * aix-thread.c (aix_thread_wait, aix_thread_pid_to_str): Adjust.
7578 * bsd-kvm.c (bsd_kvm_pid_to_str): Adjust.
7579 * bsd-uthread.c (bsd_uthread_wait, bsd_uthread_pid_to_str):
7581 * corelow.c (core_pid_to_str): Adjust.
7582 * darwin-nat.c (darwin_wait, darwin_pid_to_str): Adjust.
7583 * dec-thread.c (dec_thread_wait, dec_thread_pid_to_str): Adjust.
7584 * gnu-nat.c (gnu_wait, gnu_pid_to_str): Adjust.
7585 * go32-nat.c (go32_wait, go32_pid_to_str): Adjust.
7586 * hpux-thread.c (hpux_thread_wait): Adjust.
7587 * inf-ttrace.c (inf_ttrace_wait, inf_ttrace_pid_to_str): Adjust.
7588 * monitor.c (monitor_wait, monitor_pid_to_str): Adjust.
7589 * nto-procfs.c (procfs_wait, procfs_pid_to_str): Adjust.
7590 * procfs.c (procfs_pid_to_str): Adjust.
7591 * remote-m32r-sdi.c (m32r_wait, m32r_pid_to_str): Adjust.
7592 * remote-mips.c (mips_wait): Adjust.
7593 * remote-sim.c (gdbsim_wait, gdbsim_pid_to_str): Adjust.
7594 * remote.c (remote_wait, remote_pid_to_str)
7595 (remote_get_thread_local_address): Adjust.
7596 * rs6000-nat.c (rs6000_wait): Adjust.
7597 * sol-thread.c (procfs_pid_to_str): Adjust declaration.
7598 (sol_thread_wait, solaris_pid_to_str): Adjust.
7599 * spu-linux-nat.c (spu_child_wait): Adjust.
7600 * windows-nat.c (windows_wait, windows_pid_to_str): Adjust.
7602 2009-02-06 Tom Tromey <tromey@redhat.com>
7604 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-cmd.o.
7605 (SUBDIR_PYTHON_SRCS): Add python-cmd.c.
7606 (python-cmd.o): New target.
7607 * cli/cli-decode.c (set_cmd_completer): Add self parameter to
7608 completer prototype.
7609 (add_cmd): Initialize destroyer member of cmd_list_element. Use
7610 make_symbol_completion_list_fn as completer.
7611 (delete_cmd): Call destroyer if one is set.
7612 * cli/cli-decode.h (cmd_list_element): Add cmd parameter to
7613 completer member. Add destroyer member.
7614 (set_cmd_completer): Add self parameter to
7615 completer prototype.
7616 * command.h (set_cmd_completer): Add cmd parameter to
7617 completer prototype.
7618 * completer.c (noop_completer, filename_completer,
7619 location_completer, expression_completer, command_completer): Adapt
7620 to new completer prototype.
7621 (complete_line_internal): Pass new parameter to completer function.
7622 * completer.h (noop_completer, filename_completer,
7623 location_completer, expression_completer, command_completer): Adapt
7624 prototypes to new completer prototype.
7625 * interps.c (interpreter_completer): Adapt to new completer
7627 * python/python-cmd.c: New file.
7628 * python/python-internal.h (gdbpy_initialize_commands): Add
7630 (gdbpy_doc_cst): Add forward declaration.
7631 * python/python.c (gdbpy_doc_cst): Declare.
7632 (_initialize_python): Call gdbpy_initialize_commands. Initialize
7634 * symtab.c (make_symbol_completion_list_fn): New function.
7635 * symtab.h (make_symbol_completion_list_fn): Add prototype.
7637 2009-02-06 Pedro Alves <pedro@codesourcery.com>
7639 * target.c (target_get_osdata): Check for equal or higher than
7640 process_stratum, not dummy_stratum.
7642 2009-02-06 Pedro Alves <pedro@codesourcery.com>
7644 * remote.c (extended_remote_can_run): Delete.
7645 (init_remote_ops): Don't register it.
7646 * target.c (target_get_osdata): Don't check for target_can_run.
7647 Instead any target that has already been pushed, otherwise
7648 fallback to the default run target.
7650 2009-02-06 Pedro Alves <pedro@codesourcery.com>
7652 * target.c (target_create_inferior, target_detach)
7653 (target_mourn_inferior, target_attach, target_close): Do target
7655 (debug_to_attach, debug_to_detach, debug_to_create_inferior)
7656 (debug_to_mourn_inferior, debug_to_close): Delete.
7657 (setup_target_debug): Adjust.
7659 2009-02-05 Pedro Alves <pedro@codesourcery.com>
7661 * target.h (target_stopped_data_address_p): Delete declaration,
7662 and don't define as macro.
7663 * target.c (target_stopped_data_address_p): Delete.
7665 2009-02-05 Thiago Jung Bauermann <bauerman@br.ibm.com>
7666 Tom Tromey <tromey@redhat.com>
7668 * python/python-utils.c (target_string_to_unicode): New function.
7669 * python/python-internal.h (target_string_to_unicode): New prototype.
7670 * python/python-value.c (valpy_string): New function.
7671 (value_object_methods): Add `string' entry.
7673 2009-02-05 Pedro Alves <pedro@codesourcery.com>
7675 * target.h (target_tid_to_str): Delete.
7676 * thread.c (print_thread_info, thread_apply_all_command)
7677 (thread_apply_command, thread_command, do_captured_thread_select):
7678 Use target_pid_to_str instead of target_tid_to_str.
7679 * linux-fork.c (delete_fork_command): Likewise.
7681 2009-02-05 Pedro Alves <pedro@codesourcery.com>
7683 * frame.c (has_stack_frames): Make public.
7684 (get_prev_frame): Don't allow a NULL this_frame anymore.
7685 * frame.h (has_stack_frames): Declare.
7686 * varobj.c (find_frame_addr_in_frame_chain): Don't ever pass NULL
7687 to get_prev_frame, instead start at get_current_frame.
7688 (varobj_create): Check has_stack_frames before getting any frame;
7689 eliminate one usage of deprecated_safe_get_selected_frame.
7691 2009-02-05 Tom Tromey <tromey@redhat.com>
7692 Thiago Jung Bauermann <bauerman@br.ibm.com>
7694 * python/python.c (GdbMethods): Move to bottom of file.
7695 (get_parameter, execute_gdb_command, gdbpy_write,
7696 gdbpy_flush): Remove forward declarations.
7697 (eval_python_from_control_command): Fix error checking of function
7698 PyRun_SimpleString. Fix error string.
7699 (python_command): Likewise.
7700 (execute_gdb_command): Added from_tty argument.
7702 2009-02-05 Thiago Jung Bauermann <bauerman@br.ibm.com>
7704 * language.h (language_dfn): Add la_get_string member.
7705 (LA_GET_STRING): New macro.
7706 (default_get_string): New prototype.
7707 * language.c (default_get_string): New function.
7708 (unknown_language_defn, auto_language_defn, local_language_defn): Use
7709 default_get_string for la_get_string.
7710 * c-lang.c (c_get_string): New function.
7711 (c_language_defn, cplus_language_defn, asm_language_defn): Use
7712 c_get_string for la_get_string.
7713 (minimal_language_defn): Likewise
7714 * ada-lang.c (ada_language_defn): Likewise.
7715 * f-lang.c (f_language_defn): Use default_get_string for
7717 * jv-lang.c (java_language_defn): Likewise.
7718 * m2-lang.c (m2_language_defn): Likewise.
7719 * objc-lang.c (objc_language_defn): Likewise.
7720 * p-lang.c (p_language_defn): Likewise.
7721 * scm-lang.c (scm_language_defn): Likewise.
7722 * typeprint.c (type_to_string): New function.
7723 * value.h (type_to_string): New prototype.
7724 * valprint.c (val_print_string): Factor out code for reading string
7725 from the inferior into its own function. Put 2 spaces after period
7727 (read_string): New function.
7728 * valprint.h (read_string): New prototype.
7730 2009-01-07 Pierre Muller <muller@ics.u-strasbg.fr>
7731 Tom Tromey <tromey@redhat.com>
7733 PR breakpoints/8079:
7734 * breakpoint.c (print_one_breakpoint): Use exp_string field
7735 to display expression of watchpoints.
7736 (mention): Likewise.
7737 (watch_command_1): Remove trailing whitespace from expression.
7738 * printcmd.c (struct display) <exp_string>: New field.
7739 (display_command): Set exp_string.
7740 (free_display): Free exp_string.
7741 (clear_displays): Use free_display.
7742 (do_one_display): Print exp_string.
7743 (display_info): Likewise.
7745 2009-02-04 Tom Tromey <tromey@redhat.com>
7746 Thiago Jung Bauermann <bauerman@br.ibm.com>
7747 Phil Muldoon <pmuldoon@redhat.com>
7749 * python/python-internal.h (gdbpy_get_value_from_history): Rename
7750 prototype to gdbpy_history.
7751 (gdbpy_is_string): Declare.
7752 (python_string_to_host_string): Declare.
7753 * python/python-utils.c (gdbpy_is_string): New function.
7754 (unicode_to_encoded_string): New function.
7755 (unicode_to_target_string): Use it.
7756 (python_string_to_host_string): New function.
7757 * python/python-value.c (valpy_address): New function.
7758 (convert_value_from_python): Use gdbpy_is_string. Change to throw
7759 Python exception instead of a GDB exception on error. Properly check
7761 (valpy_getitem): Convert field name to host string. Handle array
7762 accesses. Adapt to new behaviour of convert_value_from_python.
7763 (valpy_new): Adapt to new behaviour of convert_value_from_python.
7764 (enum valpy_opcode) <VALPY_LSH, VALPY_RSH, VALPY_BITAND,
7765 VALPY_BITXOR, VALPY_BITOR>: New constants.
7766 (valpy_binop): Update. Adapt to new behaviour of
7767 convert_value_from_python.
7768 (valpy_invert): New function.
7769 (valpy_lsh): Likewise.
7770 (valpy_rsh): Likewise.
7771 (valpy_and): Likewise.
7772 (valpy_or): Likewise.
7773 (valpy_xor): Likewise.
7774 (valpy_richcompare): Call convert_value_from_python instead of doing
7776 (is_intlike, valpy_int, valpy_long, valpy_float): New functions.
7777 (gdbpy_get_value_from_history): Rename
7778 function to gdbpy_history.
7779 (gdbpy_initialize_values): Don't set tp_new.
7780 (value_object_type): Add valpy_new.
7781 (value_object_methods): Add `address' entry.
7782 (value_object_as_number): Update for new methods.
7783 * python/python.c (GdbMethods): Rename entry from
7784 `get_value_from_history' to `history'.
7786 2009-02-04 Jerome Guitton <guitton@adacore.com>
7788 * ada-lang.c (ada_template_to_fixed_record_type_1): Check size
7789 of type to guard against a crash.
7791 2009-02-04 Jerome Guitton <guitton@adacore.com>
7793 * value.c (value_from_contents_and_address): Always return
7794 a lval_memory value, even if address is null.
7796 2009-02-04 Tristan Gingold <gingold@adacore.com>
7798 * i386-darwin-tdep.c (i386_darwin_sigcontext_addr): New function.
7799 (amd64_darwin_sigcontext_addr): Ditto.
7800 (darwin_dwarf_signal_frame_p): Ditto.
7801 (i386_darwin_init_abi): Handle signal frames, use the const for
7803 (x86_darwin_init_abi_64): Ditto.
7805 2009-02-04 Tristan Gingold <gingold@adacore.com>
7807 * i386-tdep.c (i386_sigtramp_p): Make it public.
7808 * i386-tdep.h (i386_sigtramp_p): Declare.
7810 2009-02-04 Tristan Gingold <gingold@adacore.com>
7812 * machoread.c (macho_symfile_read): Read minsymtab also from
7814 (macho_symfile_read): Try to read dwarf2 frame info from main
7815 object file, but not from OSO files.
7816 (macho_symfile_offsets): Update section names for latest BFD
7818 * i386-darwin-tdep.c (i386_darwin_init_abi): Call set_solib_ops.
7819 (x86_darwin_init_abi_64): Ditto.
7820 * solib-darwin.c: New file.
7821 * solib-darwin.h: New file.
7822 * configure.tgt: Add solib.o solib-darwin.o for Darwin.
7824 2009-02-04 Tristan Gingold <gingold@adacore.com>
7826 * solist.h (struct target_so_ops): Comment fallback behavior for
7829 2009-02-03 Tom Tromey <tromey@redhat.com>
7831 * completer.c (add_struct_fields): Check type_name against NULL
7834 2009-02-03 Joel Brobecker <brobecker@adacore.com>
7836 * MAINTAINERS: Update Elena's email address.
7838 2009-02-02 Joel Brobecker <brobecker@adacore.com>
7840 * breakpoint (update_watchpoint): Minor comment adjustment.
7842 2009-02-02 Tom Tromey <tromey@redhat.com>
7845 * completer.c (count_struct_fields): Count method names.
7846 (add_struct_fields): Add matching method names.
7848 2009-02-02 Doug Evans <dje@google.com>
7850 * configure.ac (gdbkt): Check both no_tcl/no_tk first, before
7851 doing any further tcl/tk configury. Don't configure gdbtk if
7852 tcl or tk check fails.
7853 * aclocal.m4: Regenerate.
7854 * configure: Regenerate.
7856 2009-02-02 Tom Tromey <tromey@redhat.com>
7859 * valops.c (find_overload_match): Follow typedefs before taking
7860 address of object argument.
7862 2009-02-01 Doug Evans <dje@google.com>
7864 * target.h (target_waitstatus_to_string): Declare.
7865 * target.c (target_waitstatus_to_string): New function. Copied from
7866 debug_to_wait. Add missing entries for TARGET_WAITKIND_SYSCALL_ENTRY,
7867 TARGET_WAITKIND_SYSCALL_RETURN, TARGET_WAITKIND_IGNORE,
7868 TARGET_WAITKIND_NO_HISTORY.
7869 (debug_to_wait): Call it.
7870 * infrun.c (wait_for_inferior): If debug_infrun, print result of
7872 (fetch_inferior_event): Ditto.
7874 2009-01-30 Tom Tromey <tromey@redhat.com>
7876 * Makefile.in (HFILES_NO_SRCDIR): Remove i386-cygwin-tdep.h.
7878 2009-01-30 Vladimir Prus <vladimir@codesourcery.com>
7881 * thread.c (do_captured_list_thread_ids): Report the current
7884 2009-01-30 Vladimir Prus <vladimir@codesourcery.com>
7886 * breakpoint.c (create_breakpoint, create_breakpoints)
7887 (break_command_really, set_breakpoint): New parameter enabled.
7888 (create_breakpoint, break_command_really): Make breakpoint
7889 disabled if so requested.
7890 * breakpoint.h (set_breakpoint): New parameter enabled.
7891 * mi/mi-cmd-break.c (mi_cmd_break_insert): Handle the -d option.
7893 2009-01-28 Doug Evans <dje@google.com>
7895 * amd64-tdep.h (amd64_displaced_step_copy_insn): Declare.
7896 (amd64_displaced_step_fixup): Declare.
7897 * amd64-tdep.c: #include opcode/i386.h, dis-asm.h.
7898 (amd64_arch_regmap): Move out of amd64_analyze_stack_align
7899 and make static global.
7900 (amd64_arch_regmap_len): New static global.
7901 (amd64_arch_reg_to_regnum): New function.
7902 (struct amd64_insn): New struct.
7903 (struct displaced_step_closure): New struct.
7904 (onebyte_has_modrm,twobyte_has_modrm): New static globals.
7905 (rex_prefix_p,skip_prefixes)
7906 (amd64_insn_length_fprintf,amd64_insn_length_init_dis)
7907 (amd64_insn_length,amd64_get_unused_input_int_reg)
7908 (amd64_get_insn_details,fixup_riprel,fixup_displaced_copy)
7909 (amd64_displaced_step_copy_insn)
7910 (amd64_absolute_jmp_p,amd64_absolute_call_p,amd64_ret_p)
7911 (amd64_call_p,amd64_breakpoint_p,amd64_syscall_p)
7912 (amd64_displaced_step_fixup): New functions.
7913 * amd64-linux-tdep.c: #include arch-utils.h.
7914 (amd64_linux_init_abi): Install displaced stepping support.
7916 2009-01-28 Daniel Jacobowitz <dan@codesourcery.com>
7917 Jerome Guitton <guitton@adacore.com>
7919 * configure, config.in: Regenerated.
7920 * configure.ac: Add --with-system-gdbinit.
7921 * main.c (get_init_files): New.
7922 (captured_main): Use get_init_files. Load system gdbinit before
7924 (print_gdb_help): Print location of init files.
7926 2009-01-28 Pedro Alves <pedro@codesourcery.com>
7928 * corefile.c (generic_search): Delete disabled code.
7929 * gdbcore.h (generic_search): Delete declaration.
7931 2009-01-26 Pedro Alves <pedro@codesourcery.com>
7933 * linux-nat.c (linux_child_follow_fork): Copy attach_flag from the
7934 parent to the child.
7935 * inf-ttrace.c (inf_ttrace_follow_fork): Likewise.
7936 * inf-ptrace.c (inf_ptrace_follow_fork): Likewise. Use
7937 remove_breakpoints to remove breakpoints from the parent.
7939 2009-01-26 Pedro Alves <pedro@codesourcery.com>
7941 PR backtrace/9458, PR backtrace/8864:
7942 * frame.c (create_new_frame): Update the frame's cached PC before
7943 finding its unwinder. Use frame_id_build to build the new frame's
7945 * stack.c (parse_frame_specification_1): Correct setting ``addrs''
7946 array values from the ``args'' array values.
7948 2009-01-26 Pedro Alves <pedro@codesourcery.com>
7950 * gdbtypes.c (alloc_type, alloc_type_instance, create_range_type)
7951 (create_array_type, create_set_type, init_flags_type)
7952 (copy_type_recursive): Replace pairs of calls to XALLOC and memset
7953 with a call to XZALLOC or XCALLOC, and pairs of calls to
7954 obstack_alloc and memset with a call to OBSTACK_ZALLOC.
7956 2009-01-26 Pedro Alves <pedro@codesourcery.com>
7958 Add "maint set|show internal-error|internal-warning quit|corefile
7959 ask|yes|no" commands.
7962 * utils.c (internal_problem_ask, internal_problem_yes)
7963 (internal_problem_no, internal_problem_modes): New.
7964 (struct internal_problem): Remove FIXME. Make should_quit and
7965 should_dump_core types to char *.
7966 (internal_vproblem, internal_error_problem)
7967 (internal_warning_problem): Adjust.
7968 (set_internal_problem_cmd, show_internal_problem_cmd): New dummy
7970 (add_internal_problem_command): New.
7971 (_initialize_utils): New.
7973 2009-01-25 Pedro Alves <pedro@codesourcery.com>
7975 * infcmd.c (program_info): Use paddress instead of casting stop_pc
7978 2009-01-24 Pedro Alves <pedro@codesourcery.com>
7980 * infrun.c (normal_stop): Don't call
7981 deprecated_update_frame_pc_hack.
7982 * frame.c (deprecated_update_frame_pc_hack)
7983 (deprecated_update_frame_base_hack): Delete, and ...
7984 (create_new_frame): ... inline here.
7985 * frame.h (deprecated_update_frame_pc_hack)
7986 (deprecated_update_frame_base_hack): Delete declarations.
7988 2009-01-23 Pedro Alves <pedro@codesourcery.com>
7990 * cli/cli-decode.c (add_setshow_zuinteger_cmd): New.
7991 * cli/cli-setshow.c (do_setshow_command): Handle it.
7992 * command.h (enum var_types): Add var_zuinteger.
7993 (add_setshow_zuinteger_cmd): Declare.
7995 * valprint.c (_initialize_valprint): Change the set input-radix
7996 and set output-radix commands to zuinteger type.
7998 2009-01-23 Pedro Alves <pedro@codesourcery.com>
8001 * infrun.c (normal_stop): Tag threads as stopped, and run the
8002 hook-stop before printing the stack frame.
8004 2009-01-22 Pedro Alves <pedro@codesourcery.com>
8007 * gnu-v3-abi.c (gnuv3_baseclass_offset): Call check_typedef on
8010 2009-01-20 Kazu Hirata <kazu@codesourcery.com>
8012 * gdb/procfs.c (info_mappings_callback): Cast map->pr_size to
8015 2009-01-20 Daniel Jacobowitz <dan@codesourcery.com>
8018 * infcmd.c (signal_command): Do not specify a resume PC.
8020 2009-01-19 Doug Evans <dje@google.com>
8022 * dummy-frame.c (dummy_frame): Replace regcache member with
8024 (dummy_frame_push): Replace caller_regcache arg with caller_state.
8025 All callers updated.
8026 (remove_dummy_frame,pop_dummy_frame,lookup_dummy_frame): New fns.
8027 (dummy_frame_pop): Rewrite. Verify requested frame is in the
8028 dummy frame stack. Restore program state.
8029 (cleanup_dummy_frames): Rewrite.
8030 (dummy_frame_sniffer): Update. Make static.
8031 * dummy-frame.h (regcache,frame_info): Delete forward decls.
8032 (inferior_thread_state): New forward decl.
8033 (dummy_frame_push): Update prototype.
8034 * frame.c (frame_pop): dummy_frame_pop now does all the work for
8036 * infcall.c (breakpoint_auto_delete_contents): Delete.
8037 (get_function_name,run_inferior_call): New fns.
8038 (call_function_by_hand): Simplify by moving some code to
8039 get_function_name, run_inferior_call. Inferior function call wrapped
8040 in TRY_CATCH so there's less need for cleanups and all exits from
8041 proceed are handled similarily. Detect program exit.
8042 Detect program stopping in a different thread.
8043 Make error messages more consistent.
8044 * inferior.h (inferior_thread_state): Declare (opaque type).
8045 (save_inferior_thread_state,restore_inferior_thread_state,
8046 make_cleanup_restore_inferior_thread_state,
8047 discard_inferior_thread_state, get_inferior_thread_state_regcache):
8049 (save_inferior_status): Update prototype.
8050 * infrun.c: (normal_stop): When stopped for the completion of an
8051 inferior function call, verify the expected stack frame kind.
8052 (inferior_thread_state): New struct.
8053 (save_inferior_thread_state,restore_inferior_thread_state,
8054 do_restore_inferior_thread_state_cleanup,
8055 make_cleanup_restore_inferior_thread_state,
8056 discard_inferior_thread_state,
8057 get_inferior_thread_state_regcache): New functions.
8058 (inferior_status): Move stop_signal, stop_pc, registers to
8059 inferior_thread_state. Remove restore_stack_info.
8060 (save_inferior_status): Remove arg restore_stack_info.
8061 All callers updated. Remove saving of state now saved by
8062 save_inferior_thread_state.
8063 (restore_inferior_status): Remove restoration of state now done by
8064 restore_inferior_thread_state.
8065 (discard_inferior_status): Remove freeing of registers, now done by
8066 discard_inferior_thread_state.
8068 2009-01-18 Pedro Alves <pedro@codesourcery.com>
8070 * tui/tui-disasm.c (tui_vertical_disassem_scroll): Scroll one line
8071 at a time, times NUM_TO_SCROLL.
8072 * tui/tui-winsource.c (tui_horizontal_source_scroll): Don't try to
8073 fetch the selected frame if there is no stack.
8075 2009-01-18 Pedro Alves <pedro@codesourcery.com>
8078 * gdbthread.h (finish_thread_state, finish_thread_state_cleanup):
8080 * thread.c (finish_thread_state, finish_thread_state_cleanup): New.
8081 * infrun.c (wait_for_inferior, fetch_inferior_event): If an error
8082 is thrown while handling an event, finish the thread state.
8083 (normal_stop): Use finish_thread_state cleanup.
8084 * infcmd.c (run_command_1): If an error is thrown while starting
8085 the inferior, finish the thread state.
8087 2009-01-18 Pedro Alves <pedro@codesourcery.com>
8089 * tui/tui-winsource.c (tui_update_breakpoint_info): In asm layout,
8090 skip breakpoints without a location (pending breakpoints).
8092 2009-01-18 Pedro Alves <pedro@codesourcery.com>
8095 * hppa-hpux-tdep.c (hppa_hpux_write_pc): Remove 'return'.
8097 2009-01-18 Nick Roberts <nickrob@snap.net.nz>
8099 * thread.c (thread_command): Move call to annotate_thread_changed
8101 (do_captured_thread_select): ... here, to avoid printing an
8102 annotation if the thread change generates an exception.
8104 2009-01-16 Joel Brobecker <brobecker@adacore.com>
8106 * NEWS: Document x86_64/MinGW as a new native configuration.
8108 2009-01-16 Joel Brobecker <brobecker@adacore.com>
8110 * NEWS: Move the documentation of "info os processes" to
8111 the appropriate section (documenting the new commands).
8113 2009-01-15 Doug Evans <dje@google.com>
8115 * target.h (target_signal_to_string): Make return type const char *.
8116 (target_signal_to_name): Ditto.
8117 (target_signal_from_name): Make arg const char *.
8118 * infrun.c (sig_print_info): Update.
8119 * signals/signals.c (signals): Make array and struct members const.
8120 (target_signal_to_string): Make return type const char *.
8121 (target_signal_to_name): Ditto.
8122 (target_signal_from_name): Make arg const char *.
8124 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
8125 Tristan Gingold <gingold@adacore.com>
8127 * solist.h (struct target_so_ops): New member bfd_open.
8128 (solib_find): Add prototype.
8129 (solib_bfd_fopen): Add prototype.
8130 * solib.c (solib_find, solib_bfd_fopen): New functions, extracted
8131 from solib_bfd_open.
8132 (solib_bfd_open): Use ops->bfd_open override if present. Call
8133 solib_find and solib_bfd_open otherwise.
8135 * objfiles.h (OBJF_KEEPBFD): New define.
8136 * objfiles.c (free_objfile): Do not close BFD if OBJF_KEEPBFD
8137 objfile flag is set.
8138 * solib.c (symbol_add_stub): Do not allocate second BFD for
8139 shared library; use OBJF_KEEPBFD flag on solib objfile.
8141 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
8143 * frame.c (get_frame_arch): Abort if called with NULL this_frame.
8145 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
8147 * value.h (address_of_variable): Add prototype.
8148 (locate_var_value): Remove prototype.
8150 * findvar.c (read_var_value): Do not attempt to default frame
8152 (locate_var_value): Remove function.
8153 * valops.c (value_of_variable): Retrieve selected frame for
8154 symbols that require a frame when called with NULL block.
8155 * valops.c (address_of_variable): New function.
8157 * eval.c (evaluate_subexp_for_address): Call address_of_variable
8158 instead of calling locate_var_value.
8159 (evaluate_subexp_with_coercion): Likewise.
8161 2009-01-14 Daniel Jacobowitz <dan@codesourcery.com>
8163 * NEWS: Document "define" for prefixed commands.
8164 * cli/cli-cmds.c (show_user): Update calls to show_user_1. Call
8165 show_user_1 for prefix commands.
8166 * cli/cli-decode.c (help_cmd_list): Recurse for "help user-defined".
8167 * cli/cli-script.c (validate_comname): Rewrite to handle prefix
8168 commands. Return the containing command list.
8169 (define_command, document_command): Update to handle prefix commands.
8170 (show_user_1): Add prefix and name arguments. Handle prefix
8172 * cli/cli-script.h (show_user_1): Update prototype.
8174 2009-01-14 Kai Tietz <kai.tietz@onevision.com>
8176 * ser-mingw.c (console_select_thread): Add return to make
8178 (pipe_select_thread): Likewise.
8179 (file_select_thread): Likewise.
8181 2009-01-14 Pedro Alves <pedro@codesourcery.com>
8183 * mi/mi-main.c (mi_cmd_execute): Clean up parenthesis mess from
8186 2009-01-14 Pedro Alves <pedro@codesourcery.com>
8188 * remote.c (extended_remote_mourn_1): Invalidate our notion of
8189 current general thread.
8191 2009-01-14 Pedro Alves <pedro@codesourcery.com>
8193 * mi/mi-main.c (mi_cmd_execute): Also allow -list-thread-groups
8194 without a live selected thread.
8196 2009-01-14 Joel Brobecker <brobecker@adacore.com>
8198 Update the copyright notice of some of the files I missed
8199 in the previous copyright update.
8201 2009-01-14 Joel Brobecker <brobecker@adacore.com>
8203 * windows-nat.c (handle_unload_dll): Use %p to print the DLL
8204 base address instead of casting it to DWORD.
8206 2009-01-13 Ulrich Weigand <uweigand@de.ibm.com>
8208 * dwarf2loc.c (dwarf2_evaluate_loc_desc): Do not call get_frame_arch
8209 for NULL frame pointers.
8211 2009-01-13 Mark Kettenis <kettenis@gnu.org>
8213 * utils.c (host_address_to_string): Reimplement in a way that
8214 avoids the cast of the address to long.
8216 2009-01-13 Joel Brobecker <brobecker@adacore.com>
8218 * mdebugread.c (parse_symbol): Save the symbol private data
8219 using SYMBOL_VALUE_BYTES instead of SYMBOL_VALUE.
8220 (psymtab_to_symtab_1): Likewise.
8221 (parse_procedure): Declare variable "e" only in the scope
8222 where it is used. Extract the symbol private data using
8225 2009-01-13 Jim Blandy <jimb@codesourcery.com>
8227 Abstract out common code for copying value locations.
8229 * value.h (set_value_component_location): New declaration.
8230 * value.c (set_value_component_location): New function.
8231 (value_primitive_field): Use it.
8232 * valarith.c (value_subscript, value_subscripted_rvalue): Same.
8233 * valops.c (search_struct_field, value_slice): Same.
8234 * ada-lang.c (coerce_unspec_val_to_type)
8235 (ada_value_primitive_packed_val): Same.
8237 2009-01-13 Joel Brobecker <brobecker@adacore.com>
8239 * MAINTAINERS (GLOBAL MAINTAINERS): Add Tom Tromey.
8241 2009-01-12 Christopher Faylor <me+cygwin@cgf.cx>
8243 * amd64-windows-nat.c Rename gdb-specific win32_* to windows_*
8245 * i386-cygwin-tdep.c: Ditto.
8246 * i386-windows-nat.c: Ditto.
8247 * windows-nat.h: Ditto.
8248 * windows-tdep.c: Ditto.
8249 * windows-tdep.h: Ditto.
8250 * windows-nat.c: Ditto.
8251 (cygwin_load_start): Redefine as CORE_ADDR.
8252 (cygwin_load_end): Ditto.
8253 (windows_make_so): Coerce result of address arithmetic to uintptr_t
8254 before coercing to CORE_ADDR to avoid a compiler warning.
8255 (handle_exception): Define addr as CORE_ADDR and coerce
8256 ExceptionAddress to uintptr_t before assigining to avoid a compiler
8258 * config/djgpp/fnchange.lst: Add mappings for recently renamed windows
8261 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
8263 Fix linking with --enable-targets=all:
8264 * Makefile.in (ALL_TARGET_OBS): Add windows-tdep.o.
8265 (HFILES_NO_SRCDIR): Add windows-tdep.h.
8266 (ALLDEPFILES): Add windows-tdep.c.
8268 2009-01-11 Chris Faylor <me.gdb@cgf.cx>
8270 * win32-nat.h: Delete.
8271 * windows-nat.h: Rename from win32-nat.h.
8272 * win32-nat.c: Delete.
8273 * windows-nat.c: Rename from win32-nat.c.
8274 * win32-termcap.c: Delete.
8275 * windows-termcap.c: Rename from win32-termcap.c.
8276 * amd64-windows-nat.c: Handle rename from win32-nat.h -> windows-nat.h.
8277 * configure.ac: Handle rename from win32-termcap.c ->
8279 * configure: Regenerate.
8280 * gdb_curses.h: Change comment to reflect rename from win32-termcap.c
8281 -> windows-termcap.c.
8282 * i386-cygwin-tdep.c: Handle rename from win32-tdep.h ->
8284 * i386-windows-nat.c: Refect rename from win32-nat.h -> windows-nat.h.
8285 * windows-nat.c: Ditto. Also reflect rename from from win32-tdep.h ->
8287 (win32_make_so): Handle cygwin compiler warning due to change of
8288 load_addr from DWORD to LPVOID.
8289 (handle_load_dll): Use %p in format string to properly print address
8290 and avoid a compiler warning.
8291 (DEBUG_EXCEPTION_SIMPLE): Ditto.
8292 (handle_exception): Ditto.
8293 * windows-tdep.c: Handle rename from win32-tdep.h -> windows-tdep.h.
8294 * config/i386/cygwin.mh: Handle rename from win32-nat.o ->
8296 * config/i386/mingw.mh: Ditto.
8297 * config/i386/mingw64.mh: Ditto.
8299 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
8301 * f-typeprint.c (f_type_print_varspec_suffix): Convert the autovariable
8302 arrayprint_recurse_level to a parameter. Update all the callers. New
8303 comment at autovariables.
8305 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
8307 * gdbtypes.c (make_qualified_type, replace_type): Reformat to the GNU
8310 2009-01-11 Joel Brobecker <brobecker@adacore.com>
8312 * target.c (target_xfer_partial): Use host_address_to_string to
8313 print the address of readbuf and writebuf. Cast the address of
8314 elements inside the myaddr buffer into intptr_t.
8315 (deprecated_debug_xfer_memory): Use paddress to print memaddr.
8316 Cast the address of elements inside the myaddr buffer into
8319 2009-01-11 Joel Brobecker <brobecker@adacore.com>
8321 * amd64-windows-nat.c, amd64-windows-tdep.c: New files.
8322 * config/i386/mingw64.mh, config/i386/nm-cygwin64.h: New files.
8323 * configure.host, configure.tgt: Add handling for x86_64/windows.
8324 * config/djgpp/fnchange.lst: Add entries for amd64-windows-nat.c
8325 and amd64-windows-tdep.c.
8327 2009-01-11 Joel Brobecker <brobecker@adacore.com>
8329 * win32-tdep.h, win32-tdep.c: New files.
8330 * i386-cygwin-tdep.h: Delete.
8331 * i386-cygwin-tdep.c: Include win32-tdep.h instead of
8333 (win32_xfer_shared_library): Delete. Moved to win32-tdep.c.
8334 * win32-nat.c: Likewise.
8335 * configure.tgt: Add win32-tdep.o to the list of target object
8336 files for i386-cygwin and i386-mingw targets.
8338 2009-01-11 Joel Brobecker <brobecker@adacore.com>
8340 * win32-nat.h: New file.
8341 * win32-nat.c (mappings): Initialize to NULL.
8342 (win32_set_context_register_offsets): New function.
8343 * i386-windows-nat.c: New file.
8344 (mappings): Moved here from win32-nat.c.
8345 (_initialize_i386_windows_nat): New function.
8346 * config/i386/mingw.mh (NATDEPFILES): Add i386-windows-nat.o.
8347 * config/i386/cygwin.mh (NATDEPFILES): Likewise.
8349 2009-01-09 Andreas Schwab <schwab@suse.de>
8351 * Makefile.in (init.c): Set LANG/LC_ALL to C, not c.
8353 2009-01-09 Daniel Jacobowitz <dan@codesourcery.com>
8355 * gdbtypes.c (append_composite_type_field): Correct the location of
8358 2009-01-09 Pedro Alves <pedro@codesourcery.com>
8360 * defs.h (deprecated_error_hook): Delete declaration.
8361 * interps.c (clear_interpreter_hooks): Adjust.
8362 * remote-sim.c (gdb_os_error): Don't try to call
8363 deprecated_error_hook. No need to call exit anymore.
8364 * top.c (deprecated_error_hook): Delete.
8366 2009-01-09 Joel Brobecker <brobecker@adacore.com>
8368 * arch-utils.c (gdbarch_update_p): Use host_address_to_string
8369 to print the address of the gdbarch pointer.
8371 2009-01-09 Joel Brobecker <brobecker@adacore.com>
8373 * gdbarch.sh: Fix all the compilation errors on amd64-windows
8374 due to casting a pointer to a long when printing a function
8375 address. Instead, use host_address_to_string to convert our
8376 address to a string.
8377 * gdbarch.c: Regenerate.
8379 2009-01-09 Joel Brobecker <brobecker@adacore.com>
8381 * event-top.c (async_disconnect, async_stop_sig): use "raise"
8382 instead of "kill" to raise a signal.
8384 2009-01-09 Joel Brobecker <brobecker@adacore.com>
8386 * win32-nat.c (get_module_name): Change the type of parameter
8387 "base_address" to LPVOID. Remove unnecessary cast.
8388 (struct lm_info): Change type of load_addr to LPVOID.
8389 (win32_make_so): Change the type of parameter "load_addr"
8390 to LPVOID. Remove some unnecessary casts.
8391 (handle_unload_dll): Change the type of "lpBaseOfDll" to LPVOID.
8392 (win32_xfer_shared_libraries): Add missing cast.
8394 2009-01-09 Joel Brobecker <brobecker@adacore.com>
8396 * win32-nat.c (has_detach_ability, set_process_privilege):
8397 Cast the result of GetProcAddress to (void *) to avoid
8398 a compilation warning.
8400 2009-01-09 Joel Brobecker <brobecker@adacore.com>
8402 * win32-nat.c (CONTEXT_EXTENDED_REGISTERS): Define to 0 if not
8405 2009-01-09 Joel Brobecker <brobecker@adacore.com>
8407 * win32-nat.c (get_image_name, win32_xfer_memory): Fix type
8408 definition of local variable "done".
8409 (info_w32_command, handle_exception): Remove unnecessary cast.
8411 2009-01-09 Joel Brobecker <brobecker@adacore.com>
8413 * win32-nat.c (kernel32_DebugSetProcessKillOnExit): Renames
8414 DebugSetProcessKillOnExit. Update all uses in this file.
8415 (kernel32_DebugActiveProcessStop): Renames DebugActiveProcessStop.
8416 Update all uses in this file.
8418 2009-01-09 Joel Brobecker <brobecker@adacore.com>
8420 * win32-nat.c (do_initial_win32_stuff): Add new ops parameter,
8421 and use it when pushing the target.
8422 (win32_attach, win32_create_inferior): Update call to
8423 do_initial_win32_stuff.
8424 (win32_detach, win32_mourn_inferior): Use our ops parameter
8425 instead of the global win32_ops to unpush the target.
8427 2009-01-09 Joel Brobecker <brobecker@adacore.com>
8429 * ser-mingw.c (ser_windows_open): Use proper type when casting
8430 in call to _open_osfhandle.
8432 2009-01-09 Kai Tietz <kai.tietz@onevision.com>
8434 * coff-pe-read.c (read_pe_exported_syms): Fix typo.
8436 2009-01-09 Joel Brobecker <brobecker@adacore.com>
8438 * CONTRIBUTE: Minor reformatting.
8440 2009-01-08 Kai Tietz <kai.tietz@onevision.com>
8442 * MAINTAINERS: Add myself to Write After Approval.
8443 * coff-pe-read.c (read_pe_exported_syms): Enable read of PE+
8446 2009-01-08 Nathan Froyd <froydnj@codesourcery.com>
8448 * remote-sim.c (gdb_os_error): Mark as a noreturn function.
8449 Call exit to make it obvious to GCC.
8451 2009-01-08 Tom Tromey <tromey@redhat.com>
8453 PR breakpoints/9350:
8454 * varobj.c (varobj_invalidate): Unconditionally free
8456 * symfile.c (syms_from_objfile): Free local_addr when returning
8458 * exec.c (exec_file_attach): Do cleanups before returning.
8459 (exec_file_command): Likewise.
8460 * corefile.c (reopen_exec_file): Do cleanups before returning.
8461 * breakpoint.c (insert_breakpoint_locations): Do cleanups before
8463 (do_vec_free): New function.
8464 (update_global_location_list): Make a cleanup for old_locations.
8465 Do cleanups before returning. Remove unused variable 'e'.
8466 (find_condition_and_thread): Free result of parsing the
8468 (print_it_typical): Do cleanups before returning.
8469 (breakpoint_re_set_one): Always free sals.sals.
8471 2009-01-08 Joel Brobecker <brobecker@adacore.com>
8472 Emi Suzuki <emi-suzuki@tjsys.co.jp>
8474 * breakpoint.c (do_enable_breakpoint): Use update_watchpoint for
8477 2009-01-07 Doug Evans <dje@google.com>
8479 * top.c (gdb_prompt_string): Delete, unused.
8481 2009-01-07 Pedro Alves <pedro@codesourcery.com>
8483 Delete ONE_PROCESS_WRITETEXT leftovers.
8485 * breakpoint.c (insert_bp_location): Delete process_warning
8487 (insert_breakpoint_locations): Adjust.
8488 (reattach_breakpoints): Adjust.
8489 * infrun.c (normal_stop): Drop "It might be running in another
8492 2009-01-07 Stan Shebs <stan@codesourcery.com>
8494 * config/pa/linux.mh (XDEPFILES): Remove.
8496 2009-01-07 Doug Evans <dje@google.com>
8498 * cli/cli-cmds.c (set_debug): Fix cut-n-paste error.
8500 2009-01-07 Jan Kratochvil <jan.kratochvil@redhat.com>
8502 * f-typeprint.c (f_type_print_base <TYPE_CODE_STRUCT>): Fix output
8503 spacing, a regression from 2008-04-22.
8505 2009-01-07 Joel Brobecker <brobecker@adacore.com>
8507 * utils.c (gdb_print_host_address): Adjust implementation to
8508 reuse host_address_to_string. Move comment explaining the conversion
8509 from host address to string from here...
8510 (host_address_to_string): ... to there.
8512 2009-01-07 Emi Suzuki <emi-suzuki@tjsys.co.jp>
8514 * MAINTAINERS: Add myself for write after approval privileges.
8516 2009-01-06 Tom Tromey <tromey@redhat.com>
8518 * value.c (set_internalvar): Use value_free, not xfree.
8520 2009-01-06 Jim Blandy <jimb@red-bean.com>
8522 Check return values of functions declared with warn_unused_result
8523 attribute in GLIBC 2.8.
8524 * cli/cli-cmds.c (pwd_command): Check return value from getcwd.
8525 * inflow.c (check_syscall): New function.
8526 (new_tty): Use check_syscall to check return values from open and dup.
8527 * linux-nat.c (linux_nat_info_proc_cmd): Check return value from fgets.
8528 * main.c (captured_main): Call cwd after setting up gdb_stderr;
8529 check for errors from getcwd.
8530 * mi/mi-cmd-env.c (mi_cmd_env_pwd): Check return value from getcwd.
8531 * ui-file.c (stdio_file_write): Ignore return value from fwrite.
8532 (stdio_file_fputs): Same.
8533 * utils.c (internal_vproblem): abort if last-ditch error message
8536 * top.c (gdb_init): Don't set the current directory here; that's
8537 already been done in captured_main.
8539 2009-01-06 Sandra Loosemore <sandra@codesourcery.com>
8541 * ser-tcp.c: Adjust includes.
8542 (tcp_set_cmdlist, tcp_show_cmdlist): Declare.
8543 (tcp_auto_retry, tcp_retry_limit): Declare.
8544 (TIMEOUT): Remove, in favor of tcp_retry_limit.
8545 (POLL_INTERVAL): Increase to 5, in favor of backoff logic.
8546 (wait_for_connect): New function.
8547 (net_open): Use it. Add auto-retry logic.
8548 (set_tcp_cmd, show_tcp_cmd): New functions.
8549 (_initialize_ser_tcp): Initialize new "set/show tcp auto-retry"
8550 and "set/show tcp connect-timeout" commands.
8551 * NEWS: Document new commands.
8553 2009-01-05 Tom Tromey <tromey@redhat.com>
8555 * python/python-internal.h (Py_ssize_t): Define as int.
8557 2009-01-05 Jim Blandy <jimb@red-bean.com>
8559 * MAINTAINERS: Fix my e-mail address as steering committee member.
8561 2009-01-03 Joel Brobecker <brobecker@adacore.com>
8563 Updated copyright notices for most files.
8565 2009-01-03 Joel Brobecker <brobecker@adacore.com>
8567 * top.c (print_gdb_version): Update copyright year.
8569 2009-01-03 Joel Brobecker <brobecker@adacore.com>
8571 * config/djgpp/fnchange.lst: Add entry for ChangeLog-2008.
8573 2009-01-01 Pedro Alves <pedro@codesourcery.com>
8575 PR breakpoints/9681:
8576 * exceptions.h (enum errors): New error type, MEMORY_ERROR.
8577 * corefile.c (memory_error): Rewrite to throw a MEMORY_ERROR.
8578 * breakpoint.c (fetch_watchpoint_value): Ignore MEMORY_ERRORs, but
8579 retrow all other exceptions.
8581 For older changes see ChangeLog-2008.
8587 version-control: never