gdb/ChangeLog

   1 2015-03-17  Gary Benson <gbenson@redhat.com>
   2             Luke Allardyce <lukeallardyce@gmail.com>
   3
   4         PR gdb/18131
   5         * common/common-remote-fileio.h (sys/stat.h): New include.
   6         (stuct stat): Remove forward declaration.
   7
   8 2015-03-16  John Baldwin  <jhb@FreeBSD.org>
   9
  10         * fbsd-tdep.c (fbsd_make_corefile_notes): Fetch all target registers
  11         before writing core register notes.
  12
  13 2015-03-16  Yuanhui Zhang  <asmwarrior@gmail.com>
  14             Pedro Alves  <palves@redhat.com>
  15
  16         * gdb_curses.h (tgetnum): Mark with EXTERN_C.
  17         * stub-termcap.c (tgetent, tgetnum, tgetflag, tgetstr, tputs)
  18         (tgoto): Wrap with extern "C".
  19
  20 2015-03-16  Pedro Alves  <palves@redhat.com>
  21             Yuanhui Zhang  <asmwarrior@gmail.com>
  22
  23         * stub-termcap.c (tputs): Change prototype.
  24
  25 2015-03-16  Yuanhui Zhang  <asmwarrior@gmail.com>
  26             Pedro Alves  <palves@redhat.com>
  27
  28         * windows-nat.c (struct thread_info_struct): Rename to ...
  29         (struct windows_thread_info_struct): ... this.
  30         (thread_info): Rename to ...
  31         (windows_thread_info): ... this.
  32         All users updated.
  33
  34 2015-03-14  Jan Kratochvil  <jan.kratochvil@redhat.com>
  35             Pedro Alves  <palves@redhat.com>
  36
  37         * NEWS: New Removed targets and native configurations.
  38
  39 2015-03-13  Jan Kratochvil  <jan.kratochvil@redhat.com>
  40
  41         Remove HPUX.
  42         * Makefile.in (ALL_64_TARGET_OBS): Remove ia64-hpux-tdep.o.
  43         (ALL_TARGET_OBS): Remove hppa-hpux-tdep.o, solib-som.o and solib-pa64.o.
  44         (HFILES_NO_SRCDIR): Remove solib-som.h, inf-ttrace.h, solib-pa64.h and
  45         ia64-hpux-tdep.h, solib-ia64-hpux.h.
  46         (ALLDEPFILES): Remove hppa-hpux-tdep.c, hppa-hpux-nat.c,
  47         ia64-hpux-nat.c, ia64-hpux-tdep.c, somread.c and solib-som.c.
  48         * config/djgpp/fnchange.lst: Remove hppa-hpux-nat.c and
  49         hppa-hpux-tdep.c.
  50         * config/ia64/hpux.mh: Remove file.
  51         * config/pa/hpux.mh: Remove file.
  52         * configure: Rebuilt.
  53         * configure.ac (dlgetmodinfo, somread.o): Remove.
  54         * configure.host (hppa*-*-hpux*, ia64-*-hpux*): Make them obsolete.
  55         (ia64-*-hpux*): Remove its float format exception.
  56         * configure.tgt (hppa*-*-hpux*, ia64-*-hpux*): Make them obsolete.
  57         * hppa-hpux-nat.c: Remove file.
  58         * hppa-hpux-tdep.c: Remove file.
  59         * hppa-tdep.c (struct hppa_unwind_info, struct hppa_objfile_private):
  60         Move them here from hppa-tdep.h
  61         (hppa_objfile_priv_data, hppa_init_objfile_priv_data): Make it static.
  62         (hppa_frame_prev_register_helper): Remove HPPA_FLAGS_REGNUM exception.
  63         * hppa-tdep.h (struct hppa_unwind_info, struct hppa_objfile_private):
  64         Move them to hppa-tdep.c.
  65         (hppa_objfile_priv_data, hppa_init_objfile_priv_data): Remove
  66         declarations.
  67         * ia64-hpux-nat.c: Remove file.
  68         * ia64-hpux-tdep.c: Remove file.
  69         * ia64-hpux-tdep.h: Remove file.
  70         * inf-ttrace.c: Remove file.
  71         * inf-ttrace.h: Remove file.
  72         * solib-ia64-hpux.c: Remove file.
  73         * solib-ia64-hpux.h: Remove file.
  74         * solib-pa64.c: Remove file.
  75         * solib-pa64.h: Remove file.
  76         * solib-som.c: Remove file.
  77         * solib-som.h: Remove file.
  78         * somread.c: Remove file.
  79
  80 2015-03-13  John Baldwin  <jhb@FreeBSD.org>
  81
  82         * configure.ac: AC_SEARCH_LIBS(kinfo_getvmmap, util).
  83         * config.in: Regenerate.
  84         * configure: Regenerate.
  85         * fbsd-nat.c [!HAVE_KINFO_GETVMMAP] (fbsd_read_mapping): Don't
  86         define.
  87         (fbsd_find_memory_regions): Use kinfo_getvmmap to
  88         enumerate memory regions if present.
  89
  90 2015-03-13  John Baldwin  <jhb@FreeBSD.org>
  91
  92         * amd64fbsd-tdep.c (amd64fbsd_sigtramp_p): Style fixes.
  93         * i386fbsd-tdep.c: Fix style in various gdb_static_assert
  94         expressions.
  95         (i386fbsd_sigtramp_p): Likewise.
  96
  97 2015-03-12  John Baldwin  <jhb@FreeBSD.org>
  98
  99         * MAINTAINERS (Write After Approval): Add John Baldwin.
 100
 101 2015-03-12  Gary Benson <gbenson@redhat.com>
 102
 103         * solib.c (_initialize_solib): Make "set/show sysroot" use
 104         add_setshow_optional_filename_cmd so it can be restored to
 105         empty after being set.
 106
 107 2015-03-11  Sergio Durigan Junior  <sergiodj@redhat.com>
 108
 109         * Makefile.in (SFILES): New source break-catch-syscall.c.
 110         (COMMON_OBS): New object break-catch-syscall.o.
 111         * break-catch-syscall.c: New file.
 112         * breakpoint.c: Remove inclusion of "xml-syscall.h".
 113         (syscall_catchpoint_p): Move declaration to break-catch-syscall.c
 114         (struct syscall_catchpoint): Likewise.
 115         (dtor_catch_syscall): Likewise.
 116         (catch_syscall_inferior_data): Likewise.
 117         (struct catch_syscall_inferior_data): Likewise.
 118         (get_catch_syscall_inferior_data): Likewise.
 119         (catch_syscall_inferior_data_cleanup): Likewise.
 120         (insert_catch_syscall): Likewise.
 121         (remove_catch_syscall): Likewise.
 122         (breakpoint_hit_catch_syscall): Likewise.
 123         (print_it_catch_syscall): Likewise.
 124         (print_one_catch_syscall): Likewise.
 125         (print_mention_catch_syscall): Likewise.
 126         (print_recreate_catch_syscall): Likewise.
 127         (catch_syscall_breakpoint_ops): Likewise.
 128         (syscall_catchpoint_p): Likewise.
 129         (create_syscall_event_catchpoint): Likewise.
 130         (catch_syscall_split_args): Likewise.
 131         (catch_syscall_command_1): Likewise.
 132         (is_syscall_catchpoint_enabled): Likewise.
 133         (catch_syscall_enabled): Likewise.
 134         (catching_syscall_number): Likewise.
 135         (catch_syscall_completer): Likewise.
 136         (clear_syscall_counts): Likewise.
 137         (initialize_breakpoint_ops): Move initialization of syscall
 138         catchpoints to break-catch-syscall.c.
 139         (_initialize_breakpoint): Move code related to syscall catchpoints
 140         to break-catch-syscall.c.
 141
 142 2015-03-11  Sergio Durigan Junior  <sergiodj@redhat.com>
 143
 144         * breakpoint.c (breakpoint_find_if): New function.
 145         * breakpoint.h (breakpoint_find_if): New prototype.
 146
 147 2015-03-11  Gary Benson <gbenson@redhat.com>
 148
 149         * remote-fileio.h (remote_fileio_to_host_stat): New declaration.
 150         * remote-fileio.c (remote_fileio_to_host_uint): New function.
 151         (remote_fileio_to_host_ulong): Likewise.
 152         (remote_fileio_to_host_mode): Likewise.
 153         (remote_fileio_to_host_time): Likewise.
 154         (remote_fileio_to_host_stat): Likewise.
 155         * remote.c (PACKET_vFile_fstat): New enum value.
 156         (remote_protocol_features): Register the "vFile:fstat" feature.
 157         (remote_hostio_fstat): New function.
 158         (remote_bfd_iovec_stat): Use the above.
 159         (_initialize_remote): Register new "set/show remote
 160         hostio-fstat-packet" command.
 161         * symfile.c (separate_debug_file_exists): Update comment.
 162         * NEWS: Announce new vFile:fstat packet.
 163
 164 2015-03-11  Gary Benson <gbenson@redhat.com>
 165
 166         * common/common-remote-fileio.h: New file.
 167         * common/common-remote-fileio.c: Likewise.
 168         * Makefile.in (SFILES): Add common/common-remote-fileio.c.
 169         (HFILES_NO_SRCDIR): Add common/common-remote-fileio.h.
 170         (COMMON_OBS): Add common-remote-fileio.o.
 171         (common-remote-fileio.o): New rule.
 172         * remote-fileio.h (common-remote-fileio.h): New include.
 173         * remote-fileio.c (gdb/fileio.h): Do not include.
 174         (remote_fileio_to_be): Moved to common-remote-fileio.h.
 175         (remote_fileio_to_fio_uint): Likewise.
 176         (remote_fileio_to_fio_time): Likewise.
 177         (remote_fileio_mode_to_target): Moved to common-remote-fileio.c.
 178         (remote_fileio_to_fio_mode): Likewise.
 179         (remote_fileio_to_fio_ulong): Likewise.
 180         (remote_fileio_to_fio_stat): Likewise.
 181
 182 2015-03-11  Andy Wingo  <wingo@igalia.com>
 183
 184         * guile/scm-value.c (gdbscm_value_dynamic_type): Fix typo in which
 185         we were checking the cached type, not the cached dynamic type.
 186
 187 2015-03-11  Andy Wingo  <wingo@igalia.com>
 188
 189         * guile/scm-cmd.c (cmdscm_destroyer): Don't xfree the name and
 190         other strings, as these are on the GC'd heap, and will be
 191         collected along with the smob.
 192
 193 2015-03-11  Andy Wingo  <wingo@igalia.com>
 194
 195         * guile/scm-objfile.c (gdbscm_objfile_progspace): New function.
 196         (objfile_functions): Bind gdbscm_objfile_progspace to
 197         objfile-progspace.
 198         * guile/lib/gdb.scm: Add objfile-progspace to exports.
 199
 200 2015-03-11  Andy Wingo  <wingo@igalia.com>
 201
 202         * guile/guile.c (_initialize_guile): Disable automatic
 203         finalization, if Guile offers us that possibility.
 204         * guile/guile.c (call_initialize_gdb_module):
 205         * guile/scm-safe-call.c (gdbscm_with_catch): Arrange to run
 206         finalizers in appropriate places.
 207         * configure.ac (AC_TRY_LIBGUILE): Add a check for
 208         scm_set_automatic_finalization_enabled.
 209         * configure: Regenerated.
 210
 211 2015-03-11  Andreas Arnez  <arnez@linux.vnet.ibm.com>
 212
 213         * s390-linux-tdep.c (s390_skip_prologue): Skip the prologue using
 214         SAL, if possible.
 215
 216 2015-03-11  Andreas Arnez  <arnez@linux.vnet.ibm.com>
 217
 218         * s390-linux-nat.c (struct arch_lwp_info): New.
 219         (s390_fix_watch_points): Rename to...
 220         (s390_prepare_to_resume): ...this.  Skip the PER info update
 221         unless the watch points have changed.
 222         (s390_refresh_per_info, s390_new_thread): New functions.
 223         (s390_insert_watchpoint): Call s390_refresh_per_info instead of
 224         s390_fix_watch_points.
 225         (s390_remove_watchpoint): Likewise.
 226         (_initialize_s390_nat): Reflect renaming of s390_fix_watch_points.
 227         Register s390_prepare_to_resume.
 228
 229 2015-03-09  Pedro Alves  <palves@redhat.com>
 230
 231         Revert:
 232         2015-03-07  Pedro Alves  <palves@redhat.com>
 233         * common/gdb_socket.h: New file.
 234         * ser-tcp.c: Include gdb_socket.h.  Don't include netinet/in.h nor
 235         sys/socket.h.
 236         (net_open): Use union gdb_sockaddr_u.
 237
 238 2015-03-07  Pedro Alves  <palves@redhat.com>
 239
 240         * configure.ac (build_warnings): Move -Wmissing-prototypes
 241         -Wdeclaration-after-statement -Wmissing-parameter-type
 242         -Wold-style-declaration -Wold-style-definition to the C-specific
 243         set.
 244         * configure: Regenerate.
 245
 246 2015-03-07  Pedro Alves  <palves@redhat.com>
 247
 248         * common/gdb_socket.h: New file.
 249         * ser-tcp.c: Include gdb_socket.h.  Don't include netinet/in.h nor
 250         sys/socket.h.
 251         (net_open): Use union gdb_sockaddr_u.
 252
 253 2015-03-07  Pedro Alves  <palves@redhat.com>
 254
 255         * common/common-exceptions.c [!__cplusplus] (enum catcher_state)
 256         (exceptions_state_mc_action_iter)
 257         (exceptions_state_mc_action_iter_1, exceptions_state_mc_catch):
 258         Don't define.
 259         [__cplusplus] (try_scope_depth): New global.
 260         [__cplusplus] (exception_try_scope_entry)
 261         (exception_try_scope_exit, gdb_exception_sliced_copy)
 262         (exception_rethrow): New functions.
 263         (throw_exception): In C++ mode, throw
 264         gdb_exception_RETURN_MASK_QUIT for RETURN_QUIT and
 265         gdb_exception_RETURN_MASK_ERROR for RETURN_ERROR.
 266         (throw_it): In C++ mode, use try_scope_depth.
 267         * common/common-exceptions.h [!__cplusplus]
 268         (exceptions_state_mc_action_iter)
 269         (exceptions_state_mc_action_iter_1, exceptions_state_mc_catch):
 270         Don't declare.
 271         [__cplusplus] (exception_try_scope_entry)
 272         (exception_try_scope_exit, exception_rethrow): Declare.
 273         [__cplusplus] (struct exception_try_scope): New struct.
 274         [__cplusplus] (TRY, CATCH, END_CATCH): Reimplement on top of real
 275         C++ exceptions.
 276         (struct gdb_exception_RETURN_MASK_ALL)
 277         (struct gdb_exception_RETURN_MASK_ERROR)
 278         (struct gdb_exception_RETURN_MASK_QUIT): New types.
 279
 280 2015-03-07  Pedro Alves  <palves@redhat.com>
 281
 282         * main.c (handle_command_errors): Remove volatile qualifier from
 283         parameter.
 284
 285 2015-03-07  Pedro Alves  <palves@redhat.com>
 286
 287         * breakpoint.c (save_breakpoints): Adjust to avoid code between
 288         TRY and CATCH.
 289         * gdbtypes.c (safe_parse_type): Remove empty line.
 290         (types_deeply_equal):
 291         * guile/scm-frame.c (gdbscm_frame_name):
 292         * linux-thread-db.c (find_new_threads_once):
 293         * python/py-breakpoint.c (bppy_get_commands):
 294         * record-btrace.c (record_btrace_insert_breakpoint)
 295         (record_btrace_remove_breakpoint, record_btrace_start_replaying)
 296         (record_btrace_start_replaying): Adjust to avoid code between TRY
 297         and CATCH.
 298
 299 2015-03-07  Pedro Alves  <palves@redhat.com>
 300
 301         * common/common-exceptions.c (struct catcher) <exception>: No
 302         longer a pointer to volatile exception.  Now an exception value.
 303         <mask>: Delete field.
 304         (exceptions_state_mc_init): Remove all parameters.  Adjust.
 305         (exceptions_state_mc): No longer pop the catcher here.
 306         (exceptions_state_mc_catch): New function.
 307         (throw_exception): Adjust.
 308         * common/common-exceptions.h (exceptions_state_mc_init): Remove
 309         all parameters.
 310         (exceptions_state_mc_catch): Declare.
 311         (TRY_CATCH): Rename to ...
 312         (TRY): ... this.  Remove EXCEPTION and MASK parameters.
 313         (CATCH, END_CATCH): New.
 314         All callers adjusted.
 315
 316 2015-03-07  Tom Tromey  <tromey@redhat.com>
 317
 318         * top.c (quit_force): Inline and delete DO_TRY, DO_PRINT_EX.
 319
 320 2015-03-07  Pedro Alves  <palves@redhat.com>
 321
 322         * amd64-tdep.c (amd64_frame_cache, amd64_sigtramp_frame_cache)
 323         (amd64_epilogue_frame_cache): Normal exception handling code.
 324         * break-catch-throw.c (check_status_exception_catchpoint)
 325         (re_set_exception_catchpoint): Ditto.
 326         * cli/cli-interp.c (safe_execute_command):
 327         * cli/cli-script.c (script_from_file): Ditto.
 328         * compile/compile-c-symbols.c (generate_c_for_for_one_variable):
 329         Ditto.
 330         * compile/compile-object-run.c (compile_object_run): Ditto.
 331         * cp-abi.c (baseclass_offset): Ditto.
 332         * cp-valprint.c (cp_print_value): Ditto.
 333         * exceptions.c (catch_exceptions_with_msg):
 334         * frame-unwind.c (frame_unwind_try_unwinder): Ditto.
 335         * frame.c (get_frame_address_in_block_if_available): Ditto.
 336         * i386-tdep.c (i386_frame_cache, i386_epilogue_frame_cache)
 337         (i386_sigtramp_frame_cache): Ditto.
 338         * infcmd.c (post_create_inferior): Ditto.
 339         * linespec.c (parse_linespec, find_linespec_symbols):
 340         * p-valprint.c (pascal_object_print_value): Ditto.
 341         * parse.c (parse_expression_for_completion): Ditto.
 342         * python/py-finishbreakpoint.c (bpfinishpy_init): Ditto.
 343         * remote.c (remote_get_noisy_reply): Ditto.
 344         * s390-linux-tdep.c (s390_frame_unwind_cache): Ditto.
 345         * solib-svr4.c (solib_svr4_r_map): Ditto.
 346
 347 2015-03-06  Gary Benson  <gbenson@redhat.com>
 348
 349         * common/common-utils.h (startswith): New inline function.
 350         All places where this logic was used updated to use the above.
 351
 352 2015-03-05  Pedro Alves  <palves@redhat.com>
 353
 354         PR gdb/18002
 355         * mem-break.c (default_memory_insert_breakpoint): Set shadow_len
 356         after reading the breakpoint's shadow memory.
 357
 358 2015-03-05  Mark Kettenis  <kettenis@gnu.org>
 359
 360         * hppabsd-nat.c: Remove file.
 361         * hppaobsd-nat.c: New file.
 362         * Makefile.in (ALLDEPFILES): Remove hppabsd-nat.c.  Add
 363         hppaobsd-nat.c.
 364         * config/pa/obsd.mh (NATDEPFILES): Replace hppabsd-nat.o with
 365         hppaobsd-nat.o.
 366
 367 2015-03-04  Pedro Alves  <palves@redhat.com>
 368
 369         * target.h (struct target_ops) <to_decr_pc_after_break>: Delete.
 370         (target_decr_pc_after_break): Delete declaration.
 371         * target.c (default_target_decr_pc_after_break)
 372         (target_decr_pc_after_break): Delete.
 373         * linux-nat.c (check_stopped_by_breakpoint, linux_nat_wait_1): Use
 374         gdbarch_decr_pc_after_break instead of target_decr_pc_after_break.
 375         * linux-thread-db.c (check_event): Likewise.
 376         * infrun.c (adjust_pc_after_break): Likewise.
 377         * darwin-nat.c (cancel_breakpoint): Likewise.
 378         * aix-thread.c (aix_thread_wait): Likewise.
 379         * target-delegates.c: Regenerate.
 380
 381 2015-03-04  Pedro Alves  <palves@redhat.com>
 382
 383         * linux-nat.c (save_sigtrap): Check for breakpoints before
 384         checking watchpoints.
 385         (status_callback) [USE_SIGTRAP_SIGINFO]: Don't check whether a
 386         breakpoint is inserted if relying on SIGTRAP's siginfo.si_code.
 387         (check_stopped_by_breakpoint) [USE_SIGTRAP_SIGINFO]: Decide whether
 388         a breakpoint triggered based on the SIGTRAP's siginfo.si_code.
 389         (linux_nat_stopped_by_sw_breakpoint)
 390         (linux_nat_supports_stopped_by_sw_breakpoint)
 391         (linux_nat_stopped_by_hw_breakpoint)
 392         (linux_nat_supports_stopped_by_hw_breakpoint): New functions.
 393         (linux_nat_wait_1): Don't re-increment the PC if relying on
 394         SIGTRAP's siginfo->si_code.
 395         (linux_nat_add_target): Install new target methods.
 396         * linux-thread-db.c (check_event): Don't account for breakpoint PC
 397         offset if the target already adjusted the PC.
 398         * nat/linux-ptrace.h (USE_SIGTRAP_SIGINFO): New.
 399         (GDB_ARCH_TRAP_BRKPT): New.
 400         (TRAP_HWBKPT): Define if not already defined.
 401
 402 2015-03-04  Pedro Alves  <palves@redhat.com>
 403
 404         * NEWS: Mention the new "swbreak" and "hwbreak" stop reasons.
 405         * remote.c (struct remote_state) <remote_stopped_by_watchpoint_p>:
 406         Delete field.
 407         <stop_reason>: New field.
 408         (PACKET_swbreak_feature, PACKET_hwbreak_feature): New enum values.
 409         (packet_set_cmd_state): New function.
 410         (remote_protocol_features): Register the "swbreak" and "hwbreak"
 411         features.
 412         (remote_query_supported): If not disabled with the corresponding
 413         "set remote foo-packet" command, report support for the swbreak
 414         and hwbreak features.
 415         (struct stop_reply) <remote_stopped_by_watchpoint_p>: Delete
 416         field.
 417         <stop_reason>: New field.
 418         (remote_parse_stop_reply): Handle "swbreak" and "hwbreak".
 419         (remote_wait_as): Adjust.
 420         (remote_stopped_by_sw_breakpoint)
 421         (remote_supports_stopped_by_sw_breakpoint)
 422         (remote_stopped_by_hw_breakpoint)
 423         (remote_supports_stopped_by_hw_breakpoint): New functions.
 424         (remote_stopped_by_watchpoint): New function.
 425         (init_remote_ops): Install them.
 426         (_initialize_remote): Register new "set/show remote
 427         swbreak-feature-packet" and "set/show remote
 428         swbreak-feature-packet" commands.
 429
 430 2015-03-04  Pedro Alves  <palves@redhat.com>
 431
 432         * btrace.h: Include target/waitstatus.h.
 433         (struct btrace_thread_info) <stop_reason>: New field.
 434         * record-btrace.c (record_btrace_step_thread): Use
 435         record_check_stopped_by_breakpoint instead of breakpoint_here_p.
 436         (record_btrace_decr_pc_after_break): Delete.
 437         (record_btrace_stopped_by_sw_breakpoint)
 438         (record_btrace_supports_stopped_by_sw_breakpoint)
 439         (record_btrace_stopped_by_hw_breakpoint)
 440         (record_btrace_supports_stopped_by_hw_breakpoint): New functions.
 441         (init_record_btrace_ops): Install them.
 442         * record-full.c (record_full_hw_watchpoint): Delete and replace
 443         with ...
 444         (record_full_stop_reason): ... this throughout.
 445         (record_full_exec_insn): Adjust.
 446         (record_full_wait_1): Adjust.  No longer re-increment the PC.
 447         (record_full_wait_1): Adjust.  Use
 448         record_check_stopped_by_breakpoint instead of breakpoint_here_p.
 449         (record_full_stopped_by_watchpoint): Adjust.
 450         (record_full_stopped_by_sw_breakpoint)
 451         (record_full_supports_stopped_by_sw_breakpoint)
 452         (record_full_supports_stopped_by_sw_breakpoint)
 453         (record_full_stopped_by_hw_breakpoint)
 454         (record_full_supports_stopped_by_hw_breakpoint): New functions.
 455         (init_record_full_ops, init_record_full_core_ops): Install them.
 456         * record.c (record_check_stopped_by_breakpoint): New function.
 457         * record.h: Include target/waitstatus.h.
 458         (record_check_stopped_by_breakpoint): New declaration.
 459
 460 2015-03-04  Pedro Alves  <palves@redhat.com>
 461
 462         enum lwp_stop_reason -> enum target_stop_reason
 463         * linux-nat.c (linux_resume_one_lwp, check_stopped_by_watchpoint)
 464         (linux_nat_stopped_by_watchpoint, status_callback)
 465         (linux_nat_wait_1): Adjust.
 466         * linux-nat.h (enum lwp_stop_reason): Delete.
 467         (struct lwp_info) <stop_reason>: Now an enum target_stop_reason.
 468         * x86-linux-nat.c (x86_linux_prepare_to_resume): Adjust.
 469         * target/waitstatus.h (enum target_stop_reason): New.
 470
 471 2015-03-04  Pedro Alves  <palves@redhat.com>
 472
 473         * breakpoint.c (need_moribund_for_location_type): New function.
 474         (bpstat_stop_status): Don't skipping checking moribund locations
 475         of breakpoint types which the target tell caused a stop.
 476         (program_breakpoint_here_p): New function, factored out from ...
 477         (bp_loc_is_permanent): ... this.
 478         (update_global_location_list): Don't create a moribund location if
 479         the target supports reporting stops of the type of the removed
 480         breakpoint.
 481         * breakpoint.h (program_breakpoint_here_p): New declaration.
 482         * infrun.c (adjust_pc_after_break): Return early if the target has
 483         already adjusted the PC.  Add comments.
 484         (handle_signal_stop): If nothing explains a signal, and the target
 485         tells us the stop was caused by a software breakpoint, check if
 486         there's a breakpoint instruction in the memory.  If so, adjust the
 487         PC before presenting the stop to the user.  Otherwise, ignore the
 488         trap.  If nothing explains a signal, and the target tells us the
 489         stop was caused by a hardware breakpoint, ignore the trap.
 490         * target.h (struct target_ops) <to_stopped_by_sw_breakpoint,
 491         to_supports_stopped_by_sw_breakpoint, to_stopped_by_hw_breakpoint,
 492         to_supports_stopped_by_hw_breakpoint>: New fields.
 493         (target_stopped_by_sw_breakpoint)
 494         (target_supports_stopped_by_sw_breakpoint)
 495         (target_stopped_by_hw_breakpoint)
 496         (target_supports_stopped_by_hw_breakpoint): Define.
 497         * target-delegates.c: Regenerate.
 498
 499 2015-03-04  Pedro Alves  <palves@redhat.com>
 500
 501         * infrun.c (follow_fork_inferior): Use the whole of the
 502         inferior_ptid and pending_follow.related_pid ptids instead of
 503         building ptids from the process components.  Adjust verbose output
 504         to use target_pid_to_str.
 505         * linux-nat.c (linux_child_follow_fork): Use the whole of the
 506         inferior_ptid and pending_follow.related_pid ptids instead of
 507         building ptids from the process components.
 508
 509 2015-03-04  Mark Kettenis  <kettenis@gnu.org>
 510
 511         * inf-ptrace.c [PT_GET_PROCESS_STATE]
 512         (inf_ptrace_insert_fork_catchpoint): New function.
 513         (inf_ptrace_remove_fork_catchpoint): New function.
 514         (inf_ptrace_target) [PT_GET_PROCESS_STATE]: Install them.
 515
 516 2015-03-04  Andreas Arnez  <arnez@linux.vnet.ibm.com>
 517
 518         * s390-linux-tdep.c (s390_register_name): Return empty string
 519         instead of NULL for registers that shouldn't be visible.
 520
 521 2015-03-04  Andreas Arnez  <arnez@linux.vnet.ibm.com>
 522
 523         * s390-linux-tdep.c (s390_gdbarch_init): Use the correct syscall
 524         XML file for 64-bit targets.
 525
 526 2015-03-03  Simon Marchi  <simon.marchi@ericsson.com>
 527
 528         * target.h (find_default_create_inferior): Remove declaration.
 529         (find_default_attach): Likewise.
 530
 531 2015-03-03  Pedro Alves  <palves@redhat.com>
 532
 533         * inf-ptrace.c (inf_ptrace_resume): Remove spurious whitespace.
 534         Use ptid_get_pid to get the overall process id when resuming all
 535         threads.
 536
 537 2015-03-03  Pedro Alves  <palves@redhat.com>
 538
 539         * i386-linux-nat.c (i386_linux_resume): Get the ptrace PID out of
 540         the lwp field of ptid.  Pass the full ptid to get_thread_regcache.
 541         * inf-ptrace.c (get_ptrace_pid): New function.
 542         (inf_ptrace_resume): Use it.
 543         * linux-nat.c (linux_resume_one_lwp): Pass the LWP's ptid ummodified
 544         to the lower layer.
 545
 546 2015-03-03  Markus Metzger  <markus.t.metzger@intel.com>
 547
 548         * nat/linux-btrace.c: Include sys/utsname.h.
 549         (linux_determine_kernel_ptr_bits): New.
 550         (linux_enable_bts): Call linux_determine_kernel_ptr_bits.
 551         * x86-linux-nat.c (x86_linux_enable_btrace): Do not overwrite non-zero
 552         ptr_bits.
 553
 554 2015-03-03  Markus Metzger  <markus.t.metzger@intel.com>
 555
 556         * btrace.c (ftrace_update_function): Treat return as tailcall for
 557         "_dl_runtime_resolve".
 558
 559 2015-03-03  Markus Metzger  <markus.t.metzger@intel.com>
 560
 561         * btrace.h (btrace_function) <lbegin, lend>: Remove.
 562         * btrace.c (ftrace_debug): Do not print the line range.
 563         (ftrace_skip_file, ftrace_update_lines): Remove.
 564         (ftrace_new_function): Remove lbegin and lend initialization.
 565         (btrace_compute_ftrace_bts): Remove call to ftrace_update_lines.
 566         * record-btrace.c (btrace_compute_src_line_range): New.
 567         (btrace_call_history_src_line): Call btrace_compute_src_line_range.
 568
 569 2015-03-02  Pedro Alves  <palves@redhat.com>
 570
 571         * infrun.c (follow_exec): Delete all threads of the process except
 572         the event thread.  Extended comments.
 573
 574 2015-03-02  Joel Brobecker  <brobecker@adacore.com>
 575
 576         * contrib/ari/gdb_ari.sh: Reinstate checks for "true" and "false".
 577
 578 2015-03-02  Joel Brobecker  <brobecker@adacore.com>
 579
 580         * utils.h: Remove <stdbool.h> #include.
 581         (producer_is_gcc): Change return type to "int".
 582         * utils.c (producer_is_gcc): Change return type to int.
 583         Return 1 instead of true, and 0 instead of false.
 584         Adjust function documentation accordingly.
 585
 586 2015-03-02  Andreas Arnez  <arnez@linux.vnet.ibm.com>
 587
 588         * s390-linux-nat.c (have_regset_vxrs): New static variable.
 589         (s390_linux_fetch_inferior_registers): Handle vector registers, if
 590         present.
 591         (s390_linux_store_inferior_registers): Likewise.
 592         (s390_get_hwcap): Remove function.  Embed its logic...
 593         (s390_read_description): ...here.  Yield a target description with
 594         vector registers if applicable.
 595         * s390-linux-tdep.c: Include "features/s390-vx-linux64.c",
 596         "features/s390-tevx-linux64.c", "features/s390x-vx-linux64.c", and
 597         "features/s390x-tevx-linux64.c".
 598         (struct gdbarch_tdep) <v0_full_regnum>: New field.
 599         (s390_dwarf_regmap): Add vector registers.  Remove bogus entries
 600         for "GNU/Linux-specific registers".
 601         (s390_dwarf_reg_r0l): New enum value.
 602         (s390_dwarf_reg_to_regnum): Support vector registers.
 603         (s390_adjust_frame_regnum): Adjust pseudo DWARF register numbers
 604         of GPR lower halves.
 605         (regnum_is_vxr_full): New function.
 606         (s390_register_name): New function.
 607         (s390_pseudo_register_name): Handle v0-v15, which are composed of
 608         f0-f15 and v0l-v15l.
 609         (s390_pseudo_register_type): Likewise.
 610         (s390_pseudo_register_read): Likewise.
 611         (s390_pseudo_register_write): Likewise.
 612         (s390_value_from_register): Account for the fact that values are
 613         placed left-justified in vector registers.
 614         (s390_pseudo_register_reggroup_p): Add pseudo registers v0-v15 to
 615         the vector reggroup and omit them from the general reggroup.
 616         (s390_regmap_vxrs_low, s390_regmap_vxrs_high): New register maps.
 617         (s390_vxrs_low_regset, s390_vxrs_high_regset): New regsets.
 618         (s390_iterate_over_regset_sections): Add iterations for the two
 619         new vector regsets.
 620         (s390_core_read_description): Yield a target description with
 621         vector registers if applicable.
 622         (s390_gdbarch_init): Handle target descriptions with vector
 623         registers.  Add "register_name" gdbarch method.
 624         (_initialize_s390_tdep): Call new tdesc initialization functions.
 625         * s390-linux-tdep.h (HWCAP_S390_VX): New macro.
 626         (S390_V0_LOWER_REGNUM, S390_V1_LOWER_REGNUM, S390_V2_LOWER_REGNUM)
 627         (S390_V3_LOWER_REGNUM, S390_V4_LOWER_REGNUM, S390_V5_LOWER_REGNUM)
 628         (S390_V6_LOWER_REGNUM, S390_V7_LOWER_REGNUM, S390_V8_LOWER_REGNUM)
 629         (S390_V9_LOWER_REGNUM, S390_V10_LOWER_REGNUM)
 630         (S390_V11_LOWER_REGNUM, S390_V12_LOWER_REGNUM)
 631         (S390_V13_LOWER_REGNUM, S390_V14_LOWER_REGNUM)
 632         (S390_V15_LOWER_REGNUM, S390_V16_REGNUM, S390_V17_REGNUM)
 633         (S390_V18_REGNUM, S390_V19_REGNUM, S390_V20_REGNUM)
 634         (S390_V21_REGNUM, S390_V22_REGNUM, S390_V23_REGNUM)
 635         (S390_V24_REGNUM, S390_V25_REGNUM, S390_V26_REGNUM)
 636         (S390_V27_REGNUM, S390_V28_REGNUM, S390_V29_REGNUM)
 637         (S390_V30_REGNUM, S390_V31_REGNUM): New macros.
 638         (S390_NUM_REGS): Adjust value.
 639         (s390_vxrs_low_regset, s390_vxrs_high_regset): Declare.
 640         (tdesc_s390_vx_linux64, tdesc_s390_tevx_linux64)
 641         (tdesc_s390x_vx_linux64, tdesc_s390x_tevx_linux64): Likewise.
 642         * NEWS: Announce S/390 vector register support.
 643
 644 2015-03-02  Andreas Arnez  <arnez@linux.vnet.ibm.com>
 645
 646         * features/s390-tevx-linux64.xml: New file.
 647         * features/s390-vx-linux64.xml: New file.
 648         * features/s390-vx.xml: New file.
 649         * features/s390x-tevx-linux64.xml: New file.
 650         * features/s390x-vx-linux64.xml: New file.
 651         * features/Makefile (WHICH): Add s390-vx-linux64,
 652         s390x-vx-linux64, s390-tevx-linux64, and s390x-tevx-linux64.
 653         (s390-vx-linux64-expedite, s390-tevx-linux64-expedite)
 654         (s390x-vx-linux64-expedite, s390x-tevx-linux64-expedite): New
 655         macros.
 656         * features/s390-tevx-linux64.c: New generated file.
 657         * features/s390-vx-linux64.c: Likewise.
 658         * features/s390x-tevx-linux64.c: Likewise.
 659         * features/s390x-vx-linux64.c: Likewise.
 660         * regformats/s390-tevx-linux64.dat: Likewise.
 661         * regformats/s390-vx-linux64.dat: Likewise.
 662         * regformats/s390x-tevx-linux64.dat: Likewise.
 663         * regformats/s390x-vx-linux64.dat: Likewise.
 664
 665 2015-02-28  Doug Evans  <xdje42@gmail.com>
 666
 667         * symtab.h (struct symtab) <next>: Fix comment.
 668
 669 2015-02-27  Simon Marchi  <simon.marchi@ericsson.com>
 670
 671         * python/python.c (python_GdbModuleDef): Rename GdbMethods to
 672         python_GdbMethods.
 673
 674 2015-02-27  Pedro Alves  <palves@redhat.com>
 675
 676         * dtrace-probe.c (dtrace_probe_ops): Make extern.
 677
 678 2015-02-27  Pedro Alves  <palves@redhat.com>
 679
 680         * common/common-exceptions.h (exception_none): Declare.
 681         * common/common-exceptions.c (exception_none): Moved from
 682         exceptions.c.
 683         (exceptions_state_mc_init): Use exception_none.
 684         * exceptions.c (exception_none): Move to
 685         common/common-exceptions.c.
 686         * exceptions.h (exception_none): Move to
 687         common/common-exceptions.h.
 688
 689 2015-02-27  Pedro Alves  <palves@redhat.com>
 690
 691         * main.c (catch_command_errors, catch_command_errors_const):
 692         Remove 'mask' argument.  Adjust.
 693         (captured_main): Adjust callers.
 694
 695 2015-02-27  Pedro Alves  <palves@redhat.com>
 696
 697         * python/python-internal.h: Include "extension-priv.h".
 698
 699 2015-02-27  Pedro Alves  <palves@redhat.com>
 700
 701         * breakpoint.h (enum print_stop_action): Move further up in the
 702         file.
 703
 704 2015-02-27  Pedro Alves  <palves@redhat.com>
 705
 706         * gdbarch.sh: Include regcache.h.
 707         * gdbarch.h: Regenerate.
 708
 709 2015-02-27  Pedro Alves  <palves@redhat.com>
 710
 711         * arm-tdep.c (decode_insn) <arm_handle_insn, thumb_handle_insn>:
 712         Remove duplicate const.
 713         * sparc-sol2-tdep.c (sparc_sol2_static_transform_name): Remove
 714         duplicate const.
 715
 716 2015-02-27  Pedro Alves  <palves@redhat.com>
 717
 718         * cp-valprint.c (vtbl_ptr_name): Use EXPORTED_CONST.
 719         * guile/guile.c (extension_language_guile): Use EXPORTED_CONST.
 720         * features/feature_to_c.sh: Tag the generated xml_builtin array
 721         with extern const in C++ mode.
 722
 723 2015-02-27  Tom Tromey  <tromey@redhat.com>
 724
 725         * minidebug.c (struct lzma_stream): Rename to ...
 726         (struct gdb_lzma_stream): ... this.
 727         (lzma_open, lzma_pread, lzma_close, lzma_stat): Adjust.
 728
 729 2015-02-27  Pedro Alves  <palves@redhat.com>
 730
 731         * mi/mi-cmd-stack.c (mi_apply_ext_lang_frame_filter): New
 732         function.
 733         (mi_cmd_stack_list_locals, mi_cmd_stack_list_args)
 734         (mi_cmd_stack_list_variables): Use it.
 735
 736 2015-02-27  Pedro Alves  <palves@redhat.com>
 737
 738         * x86-linux-nat.c (u_debugreg_offset): New function.
 739         (x86_linux_dr_get, x86_linux_dr_set): Use it.
 740
 741 2015-02-27  Pedro Alves  <palves@redhat.com>
 742
 743         * nat/x86-dregs.h (enum target_hw_bp_type): Remove forward
 744         declaration.
 745         Include break-common.h.
 746
 747 2015-02-27  Tom Tromey  <tromey@redhat.com>
 748             Pedro Alves <palves@redhat.com>
 749
 750         * arm-tdep.c (set_fp_model_sfunc, arm_set_abi): Use 'int' for
 751         local used to iterate over enums.
 752         * completer.c (signal_completer): Likewise.
 753         * i386-tdep.c (i386_stap_parse_special_token): Likewise.
 754         * rs6000-tdep.c (powerpc_set_vector_abi): Likewise.
 755         * tui/tui-data.c (tui_next_win, tui_prev_win): Likewise.
 756         * tui/tui-layout.c (next_layout, prev_layout): Likewise.
 757         * tui/tui-win.c (tui_refresh_all_win, tui_rehighlight_all)
 758         (tui_resize_all, tui_set_focus_command, tui_all_windows_info): Likewise.
 759         * tui-wingeneral.c (tui_refresh_all):  Likewise.
 760
 761 2015-02-27  Pedro Alves  <palves@redhat.com>
 762
 763         * target.h: Include "infrun.h".
 764
 765 2015-02-27  Pedro Alves  <palves@redhat.com>
 766
 767         * gdb_proc_service.h: Wrap with EXTERN_C_PUSH/EXTERN_C_POP.
 768
 769 2015-02-27  Pedro Alves  <palves@redhat.com>
 770
 771         * common/agent.h (IPA_SYM_EXPORTED_NAME): New.
 772         (IPA_SYM): Use it.
 773         * common/common-defs.h (EXTERN_C_PUSH, EXTERN_C_POP): New macros.
 774
 775 2015-02-27  Pedro Alves  <palves@redhat.com>
 776
 777         * cli-out.c (_rl_erase_entire_line): Move declaration out of
 778         cli_mld_erase_entire_line, and make it extern "C".
 779         * common/common-defs.h (EXTERN_C): New.
 780         * completer.c (_rl_completion_prefix_display_length)
 781         (_rl_print_completions_horizontally, QSFUNC): Move declarations
 782         out of gdb_display_match_list_1.
 783         (_rl_qsort_string_compare): Move declaration out of
 784         gdb_display_match_list_1, and make it extern "C".
 785         * defs.h (re_comp): Use EXTERN_C.
 786         * maint.c (_mcleanup): Move declaration out of mcleanup_wrapper,
 787         and make it extern "C".
 788         (monstartup): Move declaration out of maintenance_set_profile_cmd,
 789         and make it extern "C".
 790         (main): Move declaration out of maintenance_set_profile_cmd.
 791         * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason_string): Use
 792         EXTERN_C.
 793
 794 2015-02-27  Pedro Alves  <palves@redhat.com>
 795
 796         * python/python.c (GdbMethods): Rename to ...
 797         (python_GdbMethods): ... this and make extern.
 798         (GdbModuleDef): Rename to ...
 799         (python_GdbModuleDef): ... this and make extern.
 800
 801 2015-02-27  Pedro Alves  <palves@redhat.com>
 802
 803         * record-btrace.c (set_record_btrace_cmdlist)
 804         (show_record_btrace_cmdlist): Remove redefinitions.
 805
 806 2015-02-27  Tom Tromey  <tromey@redhat.com>
 807             Pedro Alves  <palves@redhat.com>
 808
 809         * dwarf2-frame.c (enum cfa_how_kind, struct
 810         dwarf2_frame_state_reg_info): Move out of struct
 811         dwarf2_frame_state.
 812         * dwarf2read.c (struct tu_stats): Move out of struct
 813         dwarf2_per_objfile.
 814         (struct file_entry): Move out of struct line_header.
 815         (struct nextfield, struct nextfnfield, struct fnfieldlist, struct
 816         typedef_field_list): Move out of struct field_info.
 817         * gdbtypes.h (enum dynamic_prop_kind, union dynamic_prop_data):
 818         Move out of struct dynamic_prop.
 819         (union type_owner, union field_location, struct field, struct
 820         range_bounds, union type_specific): Move out of struct main_type.
 821         (struct fn_fieldlist, struct fn_field, struct typedef_field)
 822         (VOFFSET_STATIC): Move out of struct cplus_struct_type.
 823         (struct call_site_target, union call_site_parameter_u, struct
 824         call_site_parameter): Move out of struct call_site.
 825         * m32c-tdep.c (enum m32c_prologue_kind): Move out of struct
 826         m32c_prologue.
 827         (enum srcdest_kind): Move out of struct srcdest.
 828         * main.c (enum cmdarg_kind): Move out of struct cmdarg.
 829         * prologue-value.h (enum prologue_value_kind): Move out of struct
 830         prologue_value.
 831         * s390-linux-tdep.c (enum s390_abi_kind): Move out of struct
 832         gdbarch_tdep.
 833         * stabsread.c (struct nextfield, struct next_fnfieldlist): Move
 834         out of struct field_info.
 835         * symfile.h (struct other_sections): Move out of struct
 836         section_addr_info.
 837         * symtab.c (struct symbol_cache_slot): Move out struct
 838         block_symbol_cache.
 839         * target-descriptions.c (enum tdesc_type_kind): Move out of
 840         typedef struct tdesc_type.
 841         * tui/tui-data.h (enum tui_line_or_address_kind): Move out of
 842         struct tui_line_or_address.
 843         * value.c (enum internalvar_kind, union internalvar_data): Move
 844         out of struct internalvar.
 845         * xtensa-tdep.h (struct ctype_cache): Move out of struct
 846         gdbarch_tdep.
 847
 848 2015-02-27  Tom Tromey  <tromey@redhat.com>
 849             Pedro Alves  <palves@redhat.com>
 850
 851         Rename symbols whose names are reserved C++ keywords throughout.
 852
 853 2015-02-27  Pedro Alves  <palves@redhat.com>
 854
 855         * Makefile.in (COMPILER): New, get it from autoconf.
 856         (COMPILE.pre, CC_LD): Use COMPILER.
 857         (CXX): Get from autoconf instead.
 858         (CXX_FOR_TARGET): Default to g++ instead of gcc.
 859         * acinclude.m4: Include build-with-cxx.m4.
 860         * build-with-cxx.m4: New file.
 861         * configure.ac: Call AC_PROG_CXX and GDB_AC_BUILD_WITH_CXX.
 862         Disable -Werror by default if building in C++ mode.
 863         (build_warnings): Add -Wno-sign-compare, -Wno-write-strings and
 864         -Wno-narrowing in C++ mode.  Only enable -Wpointer-sign in C mode.
 865         Run supported-warning-flags tests with the C++ compiler.
 866         Save/restore CXXFLAGS too.
 867         * configure: Regenerate.
 868
 869 2015-02-27  Pedro Alves  <palves@redhat.com>
 870
 871         * libiberty.m4: New file.
 872         * acinclude.m4: Include libiberty.m4.
 873         * configure.ac: Call libiberty_INIT.
 874         * config.in, configure: Regenerate.
 875
 876 2015-02-27  Andreas Arnez  <arnez@linux.vnet.ibm.com>
 877
 878         * s390-linux-tdep.c (s390_gcc_target_options): Not just handle
 879         31-bit targets, but 64-bit targets as well.
 880         (s390_gnu_triplet_regexp): New function.
 881         (s390_gdbarch_init): Set the gcc_target_options gdbarch method for
 882         64-bit targets as well.  Set the gnu_triplet_regexp gdbarch
 883         method.
 884
 885 2015-02-27  Jon TURNEY  <jon.turney@dronecode.org.uk>  (tiny patch)
 886
 887         * windows-nat.c (CONTEXT_DEBUGGER): Remove.
 888         (CONTEXT_DEBUGGER_DR): Add CONTEXT_SEGMENTS.  Incorporate flags
 889         from CONTEXT_DEBUGGER.
 890
 891 2015-02-26  Doug Evans  <dje@google.com>
 892
 893         * gdbtypes.c (internal_type_vptr_fieldno): Add missing call to
 894         CHECK_TYPEDEF.
 895         (set_type_vptr_fieldno): Ditto.
 896         (internal_type_vptr_basetype, set_type_vptr_basetype): Ditto.
 897         * gnu-v3-abi.c (gnuv3_dynamic_class): Ditto.
 898
 899 2015-02-26  Pedro Alves  <palves@redhat.com>
 900
 901         * auto-load.h (file_is_auto_load_safe): Add ATTRIBUTE_PRINTF.
 902         * complaints.c (vcomplaint): Pass argument FMT directly to
 903         printf-like functions instead of complaint->fmt.
 904         * ctf.c (ctf_save_write_metadata): Add ATTRIBUTE_PRINTF.
 905         * darwin-nat.c (inferior_debug): Add ATTRIBUTE_PRINTF.
 906         * compile/compile-loc2c.c (pushf, unary, binary): Add
 907         ATTRIBUTE_PRINTF.
 908         (do_compile_dwarf_expr_to_c): Pass string literal as format string
 909         to pushf.
 910         (BINARY): Pass string literal as format string to 'binary'.
 911         * compile/compile-object-load.c (link_callbacks_einfo): Add
 912         ATTRIBUTE_PRINTF.
 913         * guile/guile-internal.h (gdbscm_printf): Add ATTRIBUTE_PRINTF.
 914
 915 2015-02-26  Pedro Alves  <palves@redhat.com>
 916
 917         * windows-termcap.c: Rename to ...
 918         * stub-termcap.c: ... this.  Adjust header line.
 919         * Makefile.in (SFILES): Refer to stub-termcap.c instead of
 920         windows-termcap.c.
 921         * configure: Regenerate.
 922         * configure.ac: Refer to stub-termcap.o instead of
 923         windows-termcap.o.
 924         * gdb_curses.h: Mention stub-termcap.c instead of
 925         windows-termcap.c.
 926
 927 2015-02-26  Jan Kratochvil  <jan.kratochvil@redhat.com>
 928
 929         * compile/compile-c-symbols.c (convert_one_symbol, convert_symbol_bmsym)
 930         (gcc_symbol_address): Call gnu_ifunc_resolve_addr.
 931
 932 2015-02-26  Antoine Tremblay  <antoine.tremblay@ericsson.com>
 933
 934         * gdb/infcmd.c (print_return_value): use type_to_string to print type.
 935
 936 2015-02-26  Jan Kratochvil  <jan.kratochvil@redhat.com>
 937
 938         * elfread.c (elf_read_minimal_symbols): Use bfd_alloc for
 939         bfd_canonicalize_symtab.
 940
 941 2015-02-25  John Baldwin  <jhb@FreeBSD.org>
 942
 943         * amd64fbsd-nat.c: Include sys/user.h.
 944         (_initialize_amd64fbsd_nat): Use the KERN_PROC_SIGTRAMP sysctl
 945         instead of KERN_PS_STRINGS to locate the signal trampoline.
 946         * i386fbsd-nat.c: Include sys/user.h.
 947         (_initialize_i386fbsd_nat): Use the KERN_PROC_SIGTRAMP sysctl
 948         instead of KERN_PS_STRINGS to locate the signal trampoline.
 949         * amd64fbsd-tdep.c (amd64fbsd_sigtramp_code): New.
 950         (amd64fbsd_sigtramp_p): New.
 951         (amd64fbsd_sigtramp_start_addr, amd64fbsd_sigtramp_end_addr): No
 952         longer set default values.
 953         (amd64fbsd_init_abi): Set "sigtramp_p" to "amd64fbsd_sigtramp_p".
 954         * i386fbsd-tdep.c (i386fbsd_sigtramp_start)
 955         (i386fbsd_sigtramp_middle, i386fbsd_sigtramp_end)
 956         (i386fbsd_freebsd4_sigtramp_start)
 957         (i386fbsd_freebsd4_sigtramp_middle)
 958         (i386fbsd_freebsd4_sigtramp_end, i386fbsd_osigtramp_start)
 959         (i386fbsd_osigtramp_middle, i386fbsd_osigtramp_end): New.
 960         (i386fbsd_sigtramp_p): New.
 961         (i386fbsd_sigtramp_start_addr, i386fbsd_sigtramp_end_addr): No
 962         longer set default values.
 963         (i386fbsd_init_abi): Set "sigtramp_p" to "i386fbsd_sigtramp_p".
 964
 965 2015-02-25  John Baldwin  <jhb@freebsd.org>
 966
 967         * amd64fbsd-tdep.c (amd64fbsd_sigcontext_addr): Use
 968         get_frame_register instead of frame_unwind_register_unsigned.
 969
 970 2015-02-26  Jan Kratochvil  <jan.kratochvil@redhat.com>
 971
 972         PR build/18033
 973         * compile/compile-c-support.c (c_compute_program): Change // comment.
 974         * compile/compile-object-load.c (setup_sections): Change // comment.
 975
 976 2015-02-26  Joel Brobecker  <brobecker@adacore.com>
 977
 978         PR build/18033:
 979         * iq2000-tdep.c (iq2000_frame_cache): Delete C++-style comment.
 980
 981 2015-02-23  Pedro Alves  <palves@redhat.com>
 982
 983         * remote.c (skip_to_semicolon): New function.
 984         (remote_parse_stop_reply) <T stop reply>: Use it.  Don't
 985         special case the stop reasons that look like hex numbers
 986         upfront.  Instead handle real register numbers after matching
 987         all the known stop reasons.
 988
 989 2015-02-21  Doug Evans  <dje@google.com>
 990
 991         PR c++/17976, symtab/17821
 992         * cp-namespace.c (cp_search_static_and_baseclasses): New parameter
 993         is_in_anonymous.  All callers updated.
 994         (find_symbol_in_baseclass): Ditto.
 995         (cp_lookup_nested_symbol_1): Ditto.  Don't search all static blocks
 996         for symbols in an anonymous namespace.
 997         * dwarf2read.c (namespace_name): Don't call dwarf2_name, fetch
 998         DW_AT_name directly.
 999         (dwarf2_name): Convert missing namespace name to
1000         CP_ANONYMOUS_NAMESPACE_STR.
1001
1002 2015-02-20  Pedro Alves  <palves@redhat.com>
1003
1004         * linux-nat.c (linux_handle_extended_wait): Call
1005         thread_db_notice_clone whenever a new clone LWP is detected.
1006         (linux_stop_and_wait_all_lwps, linux_unstop_all_lwps): New
1007         functions.
1008         * linux-nat.h (thread_db_attach_lwp): Delete declaration.
1009         (thread_db_notice_clone, linux_stop_and_wait_all_lwps)
1010         (linux_unstop_all_lwps): Declare.
1011         * linux-thread-db.c (struct thread_get_info_inout): Delete.
1012         (thread_get_info_callback): Delete.
1013         (thread_from_lwp): Use td_thr_get_info and record_thread.
1014         (thread_db_attach_lwp): Delete.
1015         (thread_db_notice_clone): New function.
1016         (try_thread_db_load_1): If /proc is mounted and shows the
1017         process'es task list, walk over all LWPs and call thread_from_lwp
1018         instead of relying on td_ta_thr_iter.
1019         (attach_thread): Don't call check_thread_signals here.  Split the
1020         tail part of the function (which adds the thread to the core GDB
1021         thread list) to ...
1022         (record_thread): ... this function.  Call check_thread_signals
1023         here.
1024         (thread_db_wait): Don't call thread_db_find_new_threads_1.  Always
1025         call thread_from_lwp.
1026         (thread_db_update_thread_list): Rename to ...
1027         (thread_db_update_thread_list_org): ... this.
1028         (thread_db_update_thread_list): New function.
1029         (thread_db_find_thread_from_tid): Delete.
1030         (thread_db_get_ada_task_ptid): Simplify.
1031         * nat/linux-procfs.c: Include <sys/stat.h>.
1032         (linux_proc_task_list_dir_exists): New function.
1033         * nat/linux-procfs.h (linux_proc_task_list_dir_exists): Declare.
1034
1035 2015-02-20  Pedro Alves  <palves@redhat.com>
1036
1037         * linux-nat.c (lin_lwp_attach_lwp): No longer special case the
1038         main LWP.  Handle the case of waitpid returning 0 if we're already
1039         attached to the LWP.  Don't set the LWP's last_resume_kind to
1040         resume_stop if we already knew about the LWP.
1041         (linux_nat_filter_event): Add debug logs.
1042
1043 2015-02-20  Pedro Alves  <palves@redhat.com>
1044
1045         * target.h (forward_target_decr_pc_after_break): Delete
1046         declaration.
1047
1048 2015-02-20  Pedro Alves  <palves@redhat.com>
1049
1050         PR threads/18006
1051         * linux-thread-db.c (thread_get_info_callback): Return early if
1052         the thread's lwp id is -1.
1053
1054 2015-02-20  Joel Brobecker  <brobecker@adacore.com>
1055
1056         GDB 7.9 released.
1057
1058 2015-02-19  Steve Ellcey  <sellcey@imgtec.com>
1059
1060         * dtrace-probe.c (dtrace_process_dof_probe): Initialize arg.expr.
1061         (dtrace_get_probes) Change type of variable 'dof'.
1062
1063 2015-02-19  Antoine Tremblay  <antoine.tremblay@ericsson.com>
1064
1065         PR breakpoints/16812
1066         * linux-nat.c (linux_nat_filter_event): Report SIGTRAP,SIGILL,SIGSEGV.
1067         * nat/linux-ptrace.c (linux_wstatus_maybe_breakpoint): Add.
1068         * nat/linux-ptrace.h: Add linux_wstatus_maybe_breakpoint.
1069
1070 2015-02-19  David Taylor  <dtaylor@emc.com>
1071
1072         * common/ax.def (setv): Fix consumed entry in setv DEFOP.
1073
1074 2015-02-18  Patrick Palka  <patrick@parcs.ath.cx>
1075
1076         * tui/tui-io.c (tui_handle_resize_during_io): Remove this
1077         function.
1078         (tui_putc): Don't call tui_handle_resize_during_io.
1079         (tui_getc): Likewise.
1080         (tui_mld_getc): Likewise.
1081         * tui/tui-win.c: Include event-loop.h and tui/tui-io.h.
1082         (tui_sigwinch_token): New static variable.
1083         (tui_initialize_win): Adjust documentation.  Set
1084         tui_sigwinch_token.
1085         (tui_async_resize_screen): New asynchronous callback.
1086         (tui_sigwinch_handler): Adjust documentation.  Asynchronously
1087         invoke tui_async_resize_screen.
1088
1089 2015-02-18  Jose E. Marchesi  <jose.marchesi@oracle.com>
1090
1091         * configure: Regenerated.
1092         * configure.ac: Use GDB_AC_TRANSFORM.
1093         * Makefile.in (aclocal_m4_deps): Added transform.m4.
1094         * acinclude.m4: sinclude transform.m4.
1095         * transform.m4: New file.
1096         (GDB_AC_TRANSFORM): New macro.
1097
1098 2015-02-17  Jose E. Marchesi  <jose.marchesi@oracle.com>
1099
1100         * NEWS: Announce the support for DTrace SDT probes.
1101
1102 2015-02-17  Jose E. Marchesi  <jose.marchesi@oracle.com>
1103
1104         * amd64-linux-tdep.c: Include "parser-defs.h" and "user-regs.h".
1105         (amd64_dtrace_parse_probe_argument): New function.
1106         (amd64_dtrace_probe_is_enabled): Likewise.
1107         (amd64_dtrace_enable_probe): Likewise.
1108         (amd64_dtrace_disable_probe): Likewise.
1109         (amd64_linux_init_abi): Register the
1110         `gdbarch_dtrace_probe_argument', `gdbarch_dtrace_enable_probe',
1111         `gdbarch_dtrace_disable_probe' and
1112         `gdbarch_dtrace_probe_is_enabled' hooks.
1113         (amd64_dtrace_disabled_probe_sequence_1): New constant.
1114         (amd64_dtrace_disabled_probe_sequence_2): Likewise.
1115         (amd64_dtrace_enable_probe_sequence): Likewise.
1116         (amd64_dtrace_disable_probe_sequence): Likewise.
1117
1118 2015-01-17  Jose E. Marchesi  <jose.marchesi@oracle.com>
1119
1120         * breakpoint.c (BREAK_ARGS_HELP): Help string updated to mention
1121         the -probe-dtrace new vpossible value for PROBE_MODIFIER.
1122         * configure.ac (CONFIG_OBS): dtrace-probe.o added if BFD can
1123         handle ELF files.
1124         * Makefile.in (SFILES): dtrace-probe.c added.
1125         * configure: Regenerate.
1126         * dtrace-probe.c: New file.
1127         (SHT_SUNW_dof): New constant.
1128         (dtrace_probe_type): New enum.
1129         (dtrace_probe_arg): New struct.
1130         (dtrace_probe_arg_s): New typedef.
1131         (struct dtrace_probe_enabler): New struct.
1132         (dtrace_probe_enabler_s): New typedef.
1133         (dtrace_probe): New struct.
1134         (dtrace_probe_is_linespec): New function.
1135         (dtrace_dof_sect_type): New enum.
1136         (dtrace_dof_dofh_ident): Likewise.
1137         (dtrace_dof_encoding): Likewise.
1138         (DTRACE_DOF_ENCODE_LSB): Likewise.
1139         (DTRACE_DOF_ENCODE_MSB): Likewise.
1140         (dtrace_dof_hdr): New struct.
1141         (dtrace_dof_sect): Likewise.
1142         (dtrace_dof_provider): Likewise.
1143         (dtrace_dof_probe): Likewise.
1144         (DOF_UINT): New macro.
1145         (DTRACE_DOF_PTR): Likewise.
1146         (DTRACE_DOF_SECT): Likewise.
1147         (dtrace_process_dof_probe): New function.
1148         (dtrace_process_dof): Likewise.
1149         (dtrace_build_arg_exprs): Likewise.
1150         (dtrace_get_arg): Likewise.
1151         (dtrace_get_probes): Likewise.
1152         (dtrace_get_probe_argument_count): Likewise.
1153         (dtrace_can_evaluate_probe_arguments): Likewise.
1154         (dtrace_evaluate_probe_argument): Likewise.
1155         (dtrace_compile_to_ax): Likewise.
1156         (dtrace_probe_destroy): Likewise.
1157         (dtrace_gen_info_probes_table_header): Likewise.
1158         (dtrace_gen_info_probes_table_values): Likewise.
1159         (dtrace_probe_is_enabled): Likewise.
1160         (dtrace_probe_ops): New variable.
1161         (info_probes_dtrace_command): New function.
1162         (_initialize_dtrace_probe): Likewise.
1163         (dtrace_type_name): Likewise.
1164
1165 2015-02-17  Jose E. Marchesi  <jose.marchesi@oracle.com>
1166
1167         * gdbarch.sh (dtrace_parse_probe_argument): New.
1168         (dtrace_probe_is_enabled): Likewise.
1169         (dtrace_enable_probe): Likewise.
1170         (dtrace_disable_probe): Likewise.
1171         * gdbarch.c: Regenerate.
1172         * gdbarch.h: Regenerate.
1173
1174 2015-02-17  Jose E. Marchesi  <jose.marchesi@oracle.com>
1175
1176         * stap-probe.c (stap_probe_ops): Add NULLs in the static
1177         stap_probe_ops for `enable_probe' and `disable_probe'.
1178         * probe.c (enable_probes_command): New function.
1179         (disable_probes_command): Likewise.
1180         (_initialize_probe): Define the cli commands `enable probe' and
1181         `disable probe'.
1182         (parse_probe_linespec): New function.
1183         (info_probes_for_ops): Use parse_probe_linespec.
1184         * probe.h (probe_ops): New hooks `enable_probe' and
1185         `disable_probe'.
1186
1187 2015-02-17  Jose E. Marchesi  <jose.marchesi@oracle.com>
1188
1189         * probe.c (compute_probe_arg): Moved from stap-probe.c
1190         (compile_probe_arg): Likewise.
1191         (probe_funcs): Likewise.
1192         * stap-probe.c (compute_probe_arg): Moved to probe.c.
1193         (compile_probe_arg): Likewise.
1194         (probe_funcs): Likewise.
1195
1196 2015-02-17  Jose E. Marchesi  <jose.marchesi@oracle.com>
1197
1198         * probe.c (print_ui_out_not_applicables): New function.
1199         (exists_probe_with_pops): Likewise.
1200         (info_probes_for_ops): Do not include column headers for probe
1201         types for which no probe has been actually found on any object.
1202         Also invoke `print_ui_out_not_applicables' in order to match the
1203         column rows with the header when probes of several types are
1204         listed.
1205         Print the "Type" column.
1206         * probe.h (probe_ops): Added a new probe operation `type_name'.
1207         * stap-probe.c (stap_probe_ops): Add `stap_type_name'.
1208         (stap_type_name): New function.
1209
1210 2015-02-17  Patrick Palka  <patrick@parcs.ath.cx>
1211
1212         * tui/tui-io.c (tui_getc): Don't call key_is_command_char.
1213         (key_is_command_char): Delete.
1214
1215 2015-02-17  Pedro Alves  <palves@redhat.com>
1216
1217         * tui/tui.c (tui_enable): Resize windows before anything
1218         might show a window.
1219
1220 2015-02-17  Max Ostapenko  <m.ostapenko@partner.samsung.com>
1221
1222         PR gdb/17984
1223         * aarch64-linux-nat.c: Don't include features/aarch64.c anymore.
1224         (aarch64_linux_read_description): Remove initialize_tdesc_aarch64
1225         call.
1226         * aarch64-tdep.h (tdesc_aarch64): Declare.
1227
1228 2015-02-12  Mark Wielaard  <mjw@redhat.com>
1229
1230         * contrib/ari/gdb_ari.sh: Remove checks for "true" and "false".
1231
1232 2015-02-13  Doug Evans  <dje@google.com>
1233
1234         * cp-namespace.c (cp_basic_lookup_symbol): Rename parameter
1235         anonymous_namespace to is_in_anonymous for consistency with the rest
1236         of the file.
1237         (cp_lookup_bare_symbol): Fix typo in comment.
1238         (cp_search_static_and_baseclasses): Ditto.
1239         (search_symbol_list): Use vertical space in comment better.
1240         (reset_directive_searched): Ditto. Fix typo.
1241         (cp_lookup_nested_symbol_1): Clarify contents of NESTED_NAME parameter.
1242
1243 2015-02-13  Yao Qi  <yao.qi@arm.com>
1244
1245         * MAINTAINERS: Update my email address.
1246
1247 2015-02-12  Doug Evans  <dje@google.com>
1248
1249         * symtab.c (completion_list_add_name): Fix memory leak.
1250
1251 2015-02-12  Doug Evans  <dje@google.com>
1252
1253         * completer.c (complete_line): Remove incorrect comment.
1254
1255 2015-02-11  Jan Kratochvil  <jan.kratochvil@redhat.com>
1256
1257         * python/py-framefilter.c (py_print_single_arg, enumerate_locals)
1258         (py_print_frame): Use RETURN_MASK_ERROR.
1259
1260 2015-02-11  Jan Kratochvil  <jan.kratochvil@redhat.com>
1261
1262         * python/py-framefilter.c (py_print_frame): Mention RETURN_QUIT in
1263         function comment.  Wrap all function that can throw in cleanups.
1264         (gdbpy_apply_frame_filter): Wrap all function that can throw in
1265         cleanups.
1266
1267 2015-02-11  Jan Kratochvil  <jan.kratochvil@redhat.com>
1268
1269         * python/py-framefilter.c (py_print_frame): Substitute goto error.
1270         Remove the error label.
1271
1272 2015-02-11  Jan Kratochvil  <jan.kratochvil@redhat.com>
1273
1274         * python/py-framefilter.c (py_print_frame): Put conditional code paths
1275         with goto first, indent the former else codepath left.  Put variable
1276         'elided' to a new inner block.
1277
1278 2015-02-11  Jan Kratochvil  <jan.kratochvil@redhat.com>
1279
1280         * python/py-framefilter.c (py_print_frame): Whitespacing fixes.
1281
1282 2015-02-11  Pedro Alves  <palves@redhat.com>
1283
1284         * xcoffread.c (within_function): Delete.
1285
1286 2015-02-11  Tom Tromey  <tromey@redhat.com>
1287             Pedro Alves <palves@redhat.com>
1288
1289         * breakpoint.c (base_breakpoint_ops): Delete.
1290         * dwarf2loc.c (dwarf_expr_ctx_funcs): Make extern.
1291         * elfread.c (elf_sym_fns_gdb_index, elf_sym_fns_lazy_psyms): Make extern.
1292         * guile/guile.c (guile_extension_script_ops, guile_extension_ops): Make extern.
1293         * ppcnbsd-tdep.c (ppcnbsd2_sigtramp): Make extern.
1294         * python/py-arch.c (arch_object_type): Make extern.
1295         * python/py-block.c (block_syms_iterator_object_type): Make extern.
1296         * python/py-bpevent.c (breakpoint_event_object_type): Make extern.
1297         * python/py-cmd.c (cmdpy_object_type): Make extern.
1298         * python/py-continueevent.c (continue_event_object_type)
1299         * python/py-event.h (GDBPY_NEW_EVENT_TYPE): Remove 'qual'
1300         parameter.  Update all callers.
1301         * python/py-evtregistry.c (eventregistry_object_type): Make extern.
1302         * python/py-exitedevent.c (exited_event_object_type): Make extern.
1303         * python/py-finishbreakpoint.c (finish_breakpoint_object_type): Make extern.
1304         * python/py-function.c (fnpy_object_type): Make extern.
1305         * python/py-inferior.c (inferior_object_type, membuf_object_type): Make extern.
1306         * python/py-infevents.c (call_pre_event_object_type)
1307         (inferior_call_post_event_object_type).
1308         (memory_changed_event_object_type): Make extern.
1309         * python/py-infthread.c (thread_object_type): Make extern.
1310         * python/py-lazy-string.c (lazy_string_object_type): Make extern.
1311         * python/py-linetable.c (linetable_entry_object_type)
1312         (linetable_object_type, ltpy_iterator_object_type): Make extern.
1313         * python/py-newobjfileevent.c (new_objfile_event_object_type)
1314         (clear_objfiles_event_object_type): Make extern.
1315         * python/py-objfile.c (objfile_object_type): Make extern.
1316         * python/py-param.c (parmpy_object_type): Make extern.
1317         * python/py-progspace.c (pspace_object_type): Make extern.
1318         * python/py-signalevent.c (signal_event_object_type): Make extern.
1319         * python/py-symtab.c (symtab_object_type, sal_object_type): Make extern.
1320         * python/py-type.c (type_object_type, field_object_type)
1321         (type_iterator_object_type): Make extern.
1322         * python/python.c (python_extension_script_ops)
1323         (python_extension_ops): Make extern.
1324         * stap-probe.c (stap_probe_ops): Make extern.
1325
1326 2015-02-11  Pedro Alves  <pedro@codesourcery.com>
1327
1328         * infrun.c (adjust_pc_after_break): Don't adjust the PC just
1329         because the event thread is not the current thread.
1330
1331 2015-02-11  Doug Evans  <xdje42@gmail.com>
1332
1333         * gdbtypes.c (internal_type_self_type): If TYPE_SPECIFIC_FIELD hasn't
1334         been initialized yet, return NULL.
1335
1336 2015-02-11  Doug Evans  <dje@google.com>
1337
1338         * symfile.h (new_symfile_objfile): Delete.
1339         * symfile.c (finish_new_objfile): Renamed from new_symfile_objfile.
1340         All callers updated.
1341
1342 2015-02-11  Patrick Palka  <patrick@parcs.ath.cx>
1343
1344         * tui/tui-io.c (tui_handle_resize_during_io): Call
1345         tui_update_gdb_sizes() after resizing the screen.
1346         * tui/tui.c (tui_enable): Resize the terminal before
1347         calling tui_update_gdb_sizes().
1348
1349 2015-02-11  Patrick Palka  <patrick@parcs.ath.cx>
1350
1351         * tui/tui-io.c (tui_getc): Move cursor to the end of the command
1352         line before printing a newline.
1353
1354 2015-02-11  Mark Wielaard  <mjw@redhat.com>
1355
1356         * utils.c (producer_is_gcc): Return true or false.
1357
1358 2015-02-10  Mark Wielaard  <mjw@redhat.com>
1359
1360         * utils.h (producer_is_gcc): Change return type to bool. Add major
1361         argument.
1362         * utils.c (producer_is_gcc): Likewise.
1363         (producer_is_gcc_ge_4): Adjust producer_is_gcc call.
1364         * dwarf2read.c (check_producer): Likewise.
1365
1366 2015-02-10  Pedro Alves  <palves@redhat.com>
1367
1368         * infrun.c (displaced_step_fixup): Switch to the event thread
1369         before calling gdbarch_displaced_step_fixup.
1370
1371 2015-02-10  Antoine Tremblay <antoine.tremblay@ericsson.com>
1372
1373         * MAINTAINERS (Write After Approval): Add Antoine Tremblay.
1374
1375 2015-02-10  Simon Marchi  <simon.marchi@ericsson.com>
1376
1377         * ada-varobj.c (ada_name_of_child): Constify parent.
1378         (ada_path_expr_of_child): Same.
1379         (ada_value_of_child): Same.
1380         (ada_type_of_child): Same.
1381         * c-varobj.c (c_is_path_expr_parent): Same.
1382         (c_describe_child): Same.
1383         (c_name_of_child): Same.
1384         (c_value_of_child): Same.
1385         (c_type_of_child): Same.
1386         (cplus_number_of_children): Same.
1387         (cplus_describe_child): Constify var.
1388         (cplus_name_of_child): Constify parent.
1389         (cplus_value_of_child): Same.
1390         (cplus_type_of_child): Same.
1391         * jv-varobj.c (java_name_of_child): Same.
1392         (java_value_of_child): Same.
1393         (java_type_of_child): Same.
1394         * varobj.c (value_of_child): Same.
1395         (varobj_default_is_path_expr_parent): Constify var, parent and return
1396         value.
1397         (varobj_get_path_expr): Constify var, modify path_expr through
1398         mutable_var.
1399         (install_new_value): Constify parent.
1400         (value_of_child): Constify parent.
1401         * varobj.h (struct varobj): Constify parent.
1402         (struct lang_varobj_ops): Constify name_of_child, value_of_child and
1403         type_of_child.
1404         (varobj_get_path_expr): Constify var.
1405         (varobj_get_path_expr_parent): Constify var and return value.
1406
1407 2015-02-10  Luis Machado  <lgustavo@codesourcery.com>
1408
1409         * arm-tdep.c (arm_prologue_unwind_stop_reason): New function.
1410         (arm_prologue_this_id): Move PC and SP limit checks to
1411         arm_prologue_unwind_stop_reason.
1412         (arm_prologue_unwind) <stop_reason> : Set to
1413         arm_prologue_unwind_stop_reason.
1414
1415 2015-02-09  Mark Wielaard  <mjw@redhat.com>
1416
1417         * dwarf2read.c (set_cu_language): Recognize DW_LANG_Fortran03 and
1418         DW_LANG_Fortran08 as language_fortran.
1419
1420 2015-02-09  Sergio Durigan Junior  <sergiodj@redhat.com>
1421
1422         PR remote/17946
1423         * gdb/remote.c (remote_parse_stop_reply): Fix wrong comparison
1424         of pointer against char.
1425
1426 2015-02-09  Mark Wielaard  <mjw@redhat.com>
1427
1428         * c-typeprint.c (cp_type_print_method_args): Handle '_Atomic'.
1429         (c_type_print_modifier): Likewise.
1430         * dwarf2read.c (read_tag_atomic_type): New function.
1431         (read_type_die_1): Handle DW_TAG_atomic_type.
1432         * gdbtypes.c (make_atomic_type): New function.
1433         (recursive_dump_type): Handle TYPE_ATOMIC.
1434         * gdbtypes.h (enum type_flag_values): Renumber.
1435         (enum type_instance_flag_value): Add TYPE_INSTANCE_FLAG_ATOMIC.
1436         (TYPE_ATOMIC): New macro.
1437         (make_atomic_type): Declare.
1438
1439 2015-02-09  Markus Metzger  <markus.t.metzger@intel.com>
1440
1441         * btrace.c (ftrace_find_call): Skip gaps.
1442         (ftrace_new_function): Initialize level.
1443         (ftrace_new_call, ftrace_new_tailcall, ftrace_new_return)
1444         (ftrace_new_switch): Update
1445         level computation.
1446         (ftrace_new_gap): New.
1447         (ftrace_update_function): Create new function after gap.
1448         (btrace_compute_ftrace_bts): Create gap on error.
1449         (btrace_stitch_bts): Update parameters.  Clear trace if it
1450         becomes empty.
1451         (btrace_stitch_trace): Update parameters.  Update callers.
1452         (btrace_clear): Reset the number of gaps.
1453         (btrace_insn_get): Return NULL if the iterator points to a gap.
1454         (btrace_insn_number): Return zero if the iterator points to a gap.
1455         (btrace_insn_end): Allow gaps at the end.
1456         (btrace_insn_next, btrace_insn_prev, btrace_insn_cmp): Handle gaps.
1457         (btrace_find_insn_by_number): Assert that the found iterator does
1458         not point to a gap.
1459         (btrace_call_next, btrace_call_prev): Assert that the last function
1460         is not a gap.
1461         * btrace.h (btrace_bts_error): New.
1462         (btrace_function): Update comment.
1463         (btrace_function) <insn, insn_offset, number>: Update comment.
1464         (btrace_function) <errcode>: New.
1465         (btrace_thread_info) <ngaps>: New.
1466         (btrace_thread_info) <replay>: Update comment.
1467         (btrace_insn_get): Update comment.
1468         * record-btrace.c (btrace_ui_out_decode_error): New.
1469         (record_btrace_info): Print number of gaps.
1470         (btrace_insn_history, btrace_call_history): Call
1471         btrace_ui_out_decode_error for gaps.
1472         (record_btrace_step_thread, record_btrace_start_replaying): Skip gaps.
1473
1474 2015-02-09  Markus Metzger  <markus.t.metzger@intel.com>
1475
1476         * common/btrace-common.h (btrace_cpu_vendor, btrace_cpu): New.
1477         * nat/linux-btrace.c: (btrace_this_cpu): New.
1478         (cpu_supports_bts): Call btrace_this_cpu.
1479         (intel_supports_bts): Add cpu parameter.
1480
1481 2015-02-09  Markus Metzger  <markus.t.metzger@intel.com>
1482
1483         * btrace.h (btrace_insn_class): New.
1484         (btrace_insn) <size, iclass>: New.
1485         * btrace.c (ftrace_find_call): Update parameters.  Update users.
1486         Use instruction classification.
1487         (ftrace_new_return): Update parameters.  Update users.
1488         (ftrace_update_function): Update parameters.  Update users.  Use
1489         instruction classification.
1490         (ftrace_update_insns): Update parameters.  Update users.
1491         (ftrace_classify_insn): New.
1492         (btrace_compute_ftrace_bts): Fill in new btrace_insn fields.  Add
1493         TRY_CATCH around call to gdb_insn_length.
1494
1495 2015-02-09  Markus Metzger  <markus.t.metzger@intel.com>
1496
1497         * btrace.c (btrace_compute_ftrace_bts, btrace_compute_ftrace):
1498         Update parameters.  Update users.
1499
1500 2015-02-09  Markus Metzger  <markus.t.metzger@intel.com>
1501
1502         * btrace.c (parse_xml_btrace_conf_bts): Add size.
1503         (btrace_conf_bts_attributes): New.
1504         (btrace_conf_children): Add attributes.
1505         * common/btrace-common.h (btrace_config_bts): New.
1506         (btrace_config)<bts>: New.
1507         (btrace_config): Update comment.
1508         * nat/linux-btrace.c (linux_enable_btrace, linux_enable_bts):
1509         Use config.
1510         * features/btrace-conf.dtd: Increment version.  Add size
1511         attribute to bts element.
1512         * record-btrace.c (set_record_btrace_bts_cmdlist,
1513         show_record_btrace_bts_cmdlist): New.
1514         (record_btrace_adjust_size, record_btrace_print_bts_conf,
1515         record_btrace_print_conf, cmd_set_record_btrace_bts,
1516         cmd_show_record_btrace_bts): New.
1517         (record_btrace_info): Call record_btrace_print_conf.
1518         (_initialize_record_btrace): Add commands.
1519         * remote.c: Add PACKET_Qbtrace_conf_bts_size enum.
1520         (remote_protocol_features): Add Qbtrace-conf:bts:size packet.
1521         (btrace_sync_conf): Synchronize bts size.
1522         (_initialize_remote): Add Qbtrace-conf:bts:size packet.
1523         * NEWS: Announce new commands and new packets.
1524
1525 2015-02-09  Markus Metzger  <markus.t.metzger@intel.com>
1526
1527         * Makefile.in (XMLFILES): Add btrace-conf.dtd.
1528         * x86-linux-nat.c (x86_linux_enable_btrace): Update parameters.
1529         (x86_linux_btrace_conf): New.
1530         (x86_linux_create_target): Initialize to_btrace_conf.
1531         * nat/linux-btrace.c (linux_enable_btrace): Update parameters.
1532         Check format.  Split into this and ...
1533         (linux_enable_bts): ... this.
1534         (linux_btrace_conf): New.
1535         (perf_event_skip_record): Renamed into ...
1536         (perf_event_skip_bts_record): ... this.  Updated users.
1537         (linux_disable_btrace): Split into this and ...
1538         (linux_disable_bts): ... this.
1539         (linux_read_btrace): Check format.
1540         * nat/linux-btrace.h (linux_enable_btrace): Update parameters.
1541         (linux_btrace_conf): New.
1542         (btrace_target_info)<ptid>: Moved.
1543         (btrace_target_info)<conf>: New.
1544         (btrace_target_info): Split into this and ...
1545         (btrace_tinfo_bts): ... this.  Updated users.
1546         * btrace.c (btrace_enable): Update parameters.
1547         (btrace_conf, parse_xml_btrace_conf_bts, parse_xml_btrace_conf)
1548         (btrace_conf_children, btrace_conf_attributes)
1549         (btrace_conf_elements): New.
1550         * btrace.h (btrace_enable): Update parameters.
1551         (btrace_conf, parse_xml_btrace_conf): New.
1552         * common/btrace-common.h (btrace_config): New.
1553         * feature/btrace-conf.dtd: New.
1554         * record-btrace.c (record_btrace_conf): New.
1555         (record_btrace_cmdlist): New.
1556         (record_btrace_enable_warn, record_btrace_open): Pass
1557         &record_btrace_conf.
1558         (record_btrace_info): Print recording format.
1559         (cmd_record_btrace_bts_start): New.
1560         (cmd_record_btrace_start): Call cmd_record_btrace_bts_start.
1561         (_initialize_record_btrace): Add "record btrace bts" subcommand.
1562         Add "record bts" alias command.
1563         * remote.c (remote_state)<btrace_config>: New.
1564         (remote_btrace_reset, PACKET_qXfer_btrace_conf): New.
1565         (remote_protocol_features): Add qXfer:btrace-conf:read.
1566         (remote_open_1): Call remote_btrace_reset.
1567         (remote_xfer_partial): Handle TARGET_OBJECT_BTRACE_CONF.
1568         (btrace_target_info)<conf>: New.
1569         (btrace_sync_conf, btrace_read_config): New.
1570         (remote_enable_btrace): Update parameters.  Call btrace_sync_conf and
1571         btrace_read_conf.
1572         (remote_btrace_conf): New.
1573         (init_remote_ops): Initialize to_btrace_conf.
1574         (_initialize_remote): Add qXfer:btrace-conf packet.
1575         * target.c (target_enable_btrace): Update parameters.
1576         (target_btrace_conf): New.
1577         * target.h (target_enable_btrace): Update parameters.
1578         (target_btrace_conf): New.
1579         (target_object)<TARGET_OBJECT_BTRACE_CONF>: New.
1580         (target_ops)<to_enable_btrace>: Update parameters and comment.
1581         (target_ops)<to_btrace_conf>: New.
1582         * target-delegates: Regenerate.
1583         * target-debug.h (target_debug_print_const_struct_btrace_config_p)
1584         (target_debug_print_const_struct_btrace_target_info_p): New.
1585         * NEWS: Announce new command and new packet.
1586
1587 2015-02-09  Markus Metzger  <markus.t.metzger@intel.com>
1588
1589         * nat/linux-btrace.h (perf_event_buffer): New.
1590         (btrace_target_info) <buffer, size, data_head>: Replace with ...
1591         <bts>: ... this.
1592         * nat/linux-btrace.c (perf_event_header, perf_event_mmap_size)
1593         (perf_event_buffer_size, perf_event_buffer_begin)
1594         (perf_event_buffer_end, linux_btrace_has_changed): Removed.
1595         Updated users.
1596         (perf_event_new_data): New.
1597
1598 2015-02-09  Markus Metzger  <markus.t.metzger@intel.com>
1599
1600         * btrace.c (btrace_enable): Pass BTRACE_FORMAT_BTS.
1601         * record-btrace.c (record_btrace_open): Remove call to
1602         target_supports_btrace.
1603         * remote.c (remote_supports_btrace): Update parameters.
1604         * target.c (target_supports_btrace): Update parameters.
1605         * target.h (to_supports_btrace, target_supports_btrace): Update
1606         parameters.
1607         * target-delegates.c: Regenerate.
1608         * target-debug.h (target_debug_print_enum_btrace_format): New.
1609         * nat/linux-btrace.c
1610         (kernel_supports_btrace): Rename into ...
1611         (kernel_supports_bts): ... this.  Update users.  Update warning text.
1612         (intel_supports_btrace): Rename into ...
1613         (intel_supports_bts): ... this.  Update users.
1614         (cpu_supports_btrace): Rename into ...
1615         (cpu_supports_bts): ... this.  Update users.
1616         (linux_supports_btrace): Update parameters.  Split into this and ...
1617         (linux_supports_bts): ... this.
1618         * nat/linux-btrace.h (linux_supports_btrace): Update parameters.
1619
1620 2015-02-09  Markus Metzger  <markus.t.metzger@intel.com>
1621
1622         * Makefile.in (SFILES): Add common/btrace-common.c.
1623         (COMMON_OBS): Add common/btrace-common.o.
1624         (btrace-common.o): Add build rules.
1625         * btrace.c (parse_xml_btrace): Update parameters.
1626         (parse_xml_btrace_block): Set format field.
1627         (btrace_add_pc, btrace_fetch): Use struct btrace_data.
1628         (do_btrace_data_cleanup, make_cleanup_btrace_data): New.
1629         (btrace_compute_ftrace): Split into this and...
1630         (btrace_compute_ftrace_bts): ...this.
1631         (btrace_stitch_trace): Split into this and...
1632         (btrace_stitch_bts): ...this.
1633         * btrace.h (parse_xml_btrace): Update parameters.
1634         (make_cleanup_btrace_data): New.
1635         * common/btrace-common.c: New.
1636         * common/btrace-common.h: Include common-defs.h.
1637         (btrace_block_s): Update comment.
1638         (btrace_format): New.
1639         (btrace_format_string): New.
1640         (btrace_data_bts): New.
1641         (btrace_data): New.
1642         (btrace_data_init, btrace_data_fini, btrace_data_empty): New.
1643         * remote.c (remote_read_btrace): Update parameters.
1644         * target.c (target_read_btrace): Update parameters.
1645         * target.h (target_read_btrace): Update parameters.
1646         (target_ops)<to_read_btrace>: Update parameters.
1647         * x86-linux-nat.c (x86_linux_read_btrace): Update parameters.
1648         * target-delegates.c: Regenerate.
1649         * target-debug (target_debug_print_struct_btrace_data_p): New.
1650         * nat/linux-btrace.c (linux_read_btrace): Split into this and...
1651         (linux_read_bts): ...this.
1652         * nat/linux-btrace.h (linux_read_btrace): Update parameters.
1653
1654 2015-02-06  Doug Evans  <dje@google.com>
1655
1656         * remote-m32r-sdi.c: Include symfile.h.
1657
1658 2015-02-06  Doug Evans  <dje@google.com>
1659
1660         * symtab.h (clear_symtab_users, deduce_language_from_filename): Move
1661         * symfile.h (clear_symtab_users, deduce_language_from_filename): ...
1662         to here.
1663
1664 2015-02-06  Pedro Alves  <palves@redhat.com>
1665
1666         * linux-thread-db.c (find_new_threads_callback): Add debug output.
1667
1668 2015-02-06  Simon Marchi  <simon.marchi@ericsson.com>
1669
1670         PR gdb/15678
1671         * breakpoint.c (map_breakpoint_numbers): Check for empty args string.
1672         (enable_count_command): Check args for NULL value.
1673
1674 2015-02-05  Doug Evans  <xdje42@gmail.com>
1675
1676         * guile/scm-frame.c: Fix spelling errors in a comment.
1677
1678 2015-02-04  Jan Kratochvil  <jan.kratochvil@redhat.com>
1679
1680         * python/python-internal.h (Py_hash_t): Define it for Python <3.2.
1681         * python/py-value.c (valpy_fetch_lazy): Use it.  Remove cast to the
1682         return type.
1683
1684 2015-02-04  Pedro Alves  <palves@redhat.com>
1685
1686         * linux-nat.c (handle_extended_wait): Don't resume LWPs here.
1687         (wait_lwp): Don't call wait_lwp if linux_handle_extended_wait
1688         returns true.
1689         (resume_stopped_resumed_lwps): Don't check whether the thread is
1690         marked as executing.
1691         (linux_nat_wait_1): Use resume_stopped_resumed_lwps.
1692
1693 2015-02-04  Andreas Arnez  <arnez@linux.vnet.ibm.com>
1694
1695         * regset.h (struct regset): Add flags field.
1696         (REGSET_VARIABLE_SIZE): New value for a regset's flags field.
1697         * corelow.c (get_core_register_section): Add warning if the size
1698         exceeds the requested size and the regset does not have the
1699         REGSET_VARIABLE_SIZE flag set.
1700         * alphanbsd-tdep.c (alphanbsd_gregset): Add REGSET_VARIABLE_SIZE
1701         flag.
1702         * armbsd-tdep.c (armbsd_gregset): Likewise.
1703         * hppa-hpux-tdep.c (hppa_hpux_regset): Likewise.
1704         * hppaobsd-tdep.c (hppaobsd_gregset): Likewise.
1705         * m68kbsd-tdep.c (m68kbsd_gregset): Likewise.
1706         * mipsnbsd-tdep.c (mipsnbsd_gregset): Likewise.
1707
1708 2015-02-04  Andreas Arnez  <arnez@linux.vnet.ibm.com>
1709
1710         * amd64-linux-tdep.c (amd64_linux_iterate_over_regset_sections):
1711         For ".reg-xstate", explicitly specify the requested section size
1712         via X86_XSTATE_SIZE instead of just 0 on input and
1713         X86_XSTATE_MAX_SIZE on output.
1714         * i386-linux-tdep.c (i386_linux_iterate_over_regset_sections):
1715         Likewise.
1716
1717 2015-02-04  Andreas Arnez  <arnez@linux.vnet.ibm.com>
1718
1719         PR corefiles/17808:
1720         * gdbarch.sh (iterate_over_regset_sections_cb): Document this
1721         function type, particularly its SIZE parameter.
1722         * gdbarch.h: Regenerate.
1723         * amd64-tdep.c (amd64_supply_fpregset): In gdb_assert, compare
1724         actual against required size using ">=" instead of "==".
1725         (amd64_collect_fpregset): Likewise.
1726         * i386-tdep.c (i386_supply_gregset): Likewise.
1727         (i386_collect_gregset): Likewise.
1728         (i386_supply_fpregset): Likewise.
1729         (i386_collect_fpregset): Likewise.
1730         * mips-linux-tdep.c (mips_supply_gregset_wrapper): Likewise.
1731         (mips_fill_gregset_wrapper): Likewise.
1732         (mips_supply_fpregset_wrapper): Likewise.
1733         (mips_fill_fpregset_wrapper): Likewise.
1734         (mips64_supply_gregset_wrapper): Likewise.
1735         (mips64_fill_gregset_wrapper): Likewise.
1736         (mips64_supply_fpregset_wrapper): Likewise.
1737         (mips64_fill_fpregset_wrapper): Likewise.
1738         * mn10300-linux-tdep.c (am33_supply_gregset_method): Likewise.
1739         (am33_supply_fpregset_method): Likewise.
1740         (am33_collect_gregset_method): Likewise.
1741         (am33_collect_fpregset_method): Likewise.
1742
1743 2015-02-04  Doug Evans  <dje@google.com>
1744             Pedro Alves  <palves@redhat.com>
1745             Eli Zaretskii  <eliz@gnu.org>
1746
1747         PR tui/17810
1748         * tui/tui-command.c (tui_refresh_cmd_win): New function.
1749         * tui/tui-command.c (tui_refresh_cmd_win): Declare.
1750         * tui/tui-file.c: #include tui/tui-command.h.
1751         (tui_file_fputs): Refresh command window if stream is not gdb_stdout.
1752         (tui_file_flush): Refresh command window if stream is gdb_stdout.
1753         * tui/tui-io.c (tui_puts): Remove calls to wrefresh, fflush.
1754
1755 2015-02-04  Pedro Alves  <palves@redhat.com>
1756
1757         Fix build breakage.
1758         * event-loop.c (gdb_do_one_event): Add default switch case.
1759
1760 2015-02-03  Jan Kratochvil  <jan.kratochvil@redhat.com>
1761
1762         Filter out inferior gcc option -fpreprocessed.
1763         * compile/compile.c (filter_args): New function.
1764         (get_args): Use it.
1765
1766 2015-02-03  Pedro Alves  <palves@redhat.com>
1767
1768         * event-loop.c: Don't declare nor define a queue type for
1769         gdb_event_p.
1770         (event_queue): Delete.
1771         (create_event, create_file_event, gdb_event_xfree)
1772         (initialize_event_loop, process_event): Delete.
1773         (gdb_do_one_event): Return as soon as one event is handled.
1774         (handle_file_event): Change prototype.  Used the passed in
1775         file_handler pointer and ready_mask instead of looping over all
1776         file handlers.
1777         (gdb_wait_for_event): Update the poll/select timeouts before
1778         blocking.  Run event handlers directly instead of queueing events.
1779         Return as soon as one event is handled.
1780         (struct async_event_handler_data): Delete.
1781         (invoke_async_event_handler): Delete.
1782         (check_async_event_handlers): Change return type to int.  Run
1783         event handlers directly instead of queueing events.  Return as
1784         soon as one event is handled.
1785         (handle_timer_event): Delete.
1786         (update_wait_timeout): New function, factored out from
1787         poll_timers.
1788         (poll_timers): Reimplement.
1789         * event-loop.h (initialize_event_loop): Delete declaration.
1790         * top.c (gdb_init): Don't call initialize_event_loop.
1791
1792 2015-02-03  Pedro Alves  <palves@redhat.com>
1793
1794         * event-loop.c (clear_async_event_handler): New function.
1795         * event-loop.h (clear_async_event_handler): New declaration.
1796         * record-btrace.c (record_btrace_async): New function.
1797         (init_record_btrace_ops): Install record_btrace_async.
1798         * record-full.c (record_full_async): New function.
1799         (record_full_resume): Don't mark the async event source here.
1800         (init_record_full_ops): Install record_full_async.
1801         (record_full_core_resume): Don't mark the async event source here.
1802         (init_record_full_core_ops): Install record_full_async.
1803         * remote.c (remote_async): Mark and clear the async stop reply
1804         queue event-loop token as appropriate.
1805
1806 2015-02-03  Pedro Alves  <palves@redhat.com>
1807
1808         * linux-nat.c (linux_child_follow_fork, linux_nat_wait_1): Use
1809         target_is_async_p instead of target_can_async.
1810         (linux_nat_wait): Use target_is_async_p instead of
1811         target_can_async.  Don't enable async here.
1812         * remote.c (interrupt_query, remote_wait, putpkt_binary): Use
1813         target_is_async_p instead of target_can_async.
1814
1815 2015-02-02  Simon Marchi  <simon.marchi@ericsson.com>
1816
1817         * varobj.h (lang_varobj_ops): Mention which return values need
1818         to be freed.
1819
1820 2015-02-02  Joel Brobecker  <brobecker@adacore.com>
1821
1822         * dwarf2loc.c (dwarf2_evaluate_property): Add i18n marker.
1823
1824 2015-02-02  Joel Brobecker  <brobecker@adacore.com>
1825
1826         PR gdb/17856:
1827         * ada-lang.c (ada_lookup_symbol_list_worker): Do not re-cache
1828         results found in the cache.
1829
1830 2015-02-02  Joel Brobecker  <brobecker@adacore.com>
1831
1832         PR gdb/17854:
1833         * ada-lang.c (ada_get_symbol_cache): Set pspace_data->sym_cache
1834         when allocating a new one.
1835
1836 2015-02-01  Tom Tromey  <tom@tromey.com>
1837
1838         * MAINTAINERS: Remove myself.
1839
1840 2015-01-31  Doug Evans  <xdje42@gmail.com>
1841
1842         * dwarf2read.c (process_structure_scope): Update setting of
1843         TYPE_VPTR_BASETYPE, TYPE_VPTR_FIELDNO.
1844         * gdbtypes.c (internal_type_vptr_fieldno): New function.
1845         (set_type_vptr_fieldno): New function.
1846         (internal_type_vptr_basetype): New function.
1847         (set_type_vptr_basetype): New function.
1848         (get_vptr_fieldno): Update setting of TYPE_VPTR_FIELDNO,
1849         TYPE_VPTR_BASETYPE.
1850         (allocate_cplus_struct_type): Initialize vptr_fieldno.
1851         (recursive_dump_type): Printing of vptr_fieldno, vptr_basetype ...
1852         (print_cplus_stuff): ... moved here.
1853         (copy_type_recursive): Don't copy TYPE_VPTR_BASETYPE.
1854         * gdbtypes.h (struct main_type): Members vptr_fieldno, vptr_basetype
1855         moved to ...
1856         (struct cplus_struct_type): ... here.  All uses updated.
1857         (TYPE_VPTR_FIELDNO, TYPE_VPTR_BASETYPE): Rewrite.
1858         (internal_type_vptr_fieldno, set_type_vptr_fieldno): Declare.
1859         (internal_type_vptr_basetype, set_type_vptr_basetype): Declare.
1860         * stabsread.c (read_tilde_fields): Update setting of
1861         TYPE_VPTR_FIELDNO, TYPE_VPTR_BASETYPE.
1862
1863 2015-01-31  Doug Evans  <xdje42@gmail.com>
1864
1865         * cp-valprint.c (cp_find_class_member): Rename parameter domain_p
1866         to self_p.
1867         (cp_print_class_member): Rename local domain to self_type.
1868         * dwarf2read.c (quirk_gcc_member_function_pointer): Rename local
1869         domain_type to self_type.
1870         (set_die_type) <need_gnat_info>: Handle
1871         TYPE_CODE_METHODPTR, TYPE_CODE_MEMBERPTR, TYPE_CODE_METHOD.
1872         * gdb-gdb.py (StructMainTypePrettyPrinter): Handle
1873         TYPE_SPECIFIC_SELF_TYPE.
1874         * gdbtypes.c (internal_type_self_type): New function.
1875         (set_type_self_type): New function.
1876         (smash_to_memberptr_type): Rename parameter domain to self_type.
1877         Update setting of TYPE_SELF_TYPE.
1878         (smash_to_methodptr_type): Update setting of TYPE_SELF_TYPE.
1879         (smash_to_method_type): Rename parameter domain to self_type.
1880         Update setting of TYPE_SELF_TYPE.
1881         (check_stub_method): Call smash_to_method_type.
1882         (recursive_dump_type): Handle TYPE_SPECIFIC_SELF_TYPE.
1883         (copy_type_recursive): Ditto.
1884         * gdbtypes.h (enum type_specific_kind): New value
1885         TYPE_SPECIFIC_SELF_TYPE.
1886         (struct main_type) <type_specific>: New member self_type.
1887         (struct cplus_struct_type) <fn_field.type>: Update comment.
1888         (TYPE_SELF_TYPE): Rewrite.
1889         (internal_type_self_type, set_type_self_type): Declare.
1890         * gnu-v3-abi.c (gnuv3_print_method_ptr): Rename local domain to
1891         self_type.
1892         (gnuv3_method_ptr_to_value): Rename local domain_type to self_type.
1893         * m2-typeprint.c (m2_range): Replace TYPE_SELF_TYPE with
1894         TYPE_TARGET_TYPE.
1895         * stabsread.c (read_member_functions): Mark methods with
1896         TYPE_CODE_METHOD, not TYPE_CODE_FUNC.  Update setting of
1897         TYPE_SELF_TYPE.
1898
1899 2015-01-31  Doug Evans  <xdje42@gmail.com>
1900
1901         * gdbtypes.h (TYPE_SELF_TYPE): Renamed from TYPE_DOMAIN_TYPE.
1902         All uses updated.
1903
1904 2015-01-31  Doug Evans  <xdje42@gmail.com>
1905
1906         * gnu-v3-abi.c (gnuv3_dynamic_class): Assert only passed structs
1907         or unions.  Return zero if union.
1908         (gnuv3_get_vtable): Call check_typedef.  Assert only passed structs.
1909         (gnuv3_rtti_type): Pass already-check_typedef'd value to
1910         gnuv3_get_vtable.
1911         (compute_vtable_size): Assert only passed structs.
1912         (gnuv3_print_vtable): Don't call gnuv3_get_vtable for non-structs.
1913
1914 2015-01-31  Doug Evans  <xdje42@gmail.com>
1915
1916         * gdbtypes.c (copy_type_recursive): Handle all TYPE_SPECIFIC_FIELD
1917         kinds.
1918
1919 2015-01-31  Gary Benson <gbenson@redhat.com>
1920             Doug Evans  <dje@google.com>
1921
1922         PR cli/9007
1923         PR cli/11920
1924         PR cli/15548
1925         * cli/cli-cmds.c (complete_command): Notify user if max-completions
1926         reached.
1927         * common/common-exceptions.h (enum errors)
1928         <MAX_COMPLETIONS_REACHED_ERROR>: New value.
1929         * completer.h (get_max_completions_reached_message): New declaration.
1930         (max_completions): Likewise.
1931         (completion_tracker_t): New typedef.
1932         (new_completion_tracker): New declaration.
1933         (make_cleanup_free_completion_tracker): Likewise.
1934         (maybe_add_completion_enum): New enum.
1935         (maybe_add_completion): New declaration.
1936         (throw_max_completions_reached_error): Likewise.
1937         * completer.c (max_completions): New global variable.
1938         (new_completion_tracker): New function.
1939         (free_completion_tracker): Likewise.
1940         (make_cleanup_free_completion_tracker): Likewise.
1941         (maybe_add_completions): Likewise.
1942         (throw_max_completions_reached_error): Likewise.
1943         (complete_line): Remove duplicates and limit result to max_completions
1944         entries.
1945         (get_max_completions_reached_message): New function.
1946         (gdb_display_match_list): Handle max_completions.
1947         (_initialize_completer): New declaration and function.
1948         * symtab.c: Include completer.h.
1949         (completion_tracker): New static variable.
1950         (completion_list_add_name): Call maybe_add_completion.
1951         (default_make_symbol_completion_list_break_on_1): Renamed from
1952         default_make_symbol_completion_list_break_on.  Maintain
1953         completion_tracker across calls to completion_list_add_name.
1954         (default_make_symbol_completion_list_break_on): New function.
1955         * top.c (init_main): Set rl_completion_display_matches_hook.
1956         * tui/tui-io.c: Include completer.h.
1957         (tui_old_rl_display_matches_hook): New static global.
1958         (tui_rl_display_match_list): Notify user if max-completions reached.
1959         (tui_setup_io): Save/restore rl_completion_display_matches_hook.
1960         * NEWS (New Options): Mention set/show max-completions.
1961
1962 2015-01-31  Gary Benson  <gbenson@redhat.com>
1963
1964         * symtab.c (struct add_name_data) <code>: New field.
1965         Updated comments.
1966         (add_symtab_completions): New function.
1967         (symtab_expansion_callback): Likewise.
1968         (default_make_symbol_completion_list_break_on): Set datum.code.
1969         Move minimal symbol scan before calling expand_symtabs_matching.
1970         Scan known primary symtabs for externs and statics before calling
1971         expand_symtabs_matching.  Pass symtab_expansion_callback as
1972         expansion_notify argument to expand_symtabs_matching.  Do not scan
1973         primary symtabs for externs and statics after calling
1974         expand_symtabs_matching.
1975
1976 2015-01-31  Gary Benson  <gbenson@redhat.com>
1977
1978         * symfile.h (expand_symtabs_exp_notify_ftype): New typedef.
1979         (struct quick_symbol_functions) <expand_symtabs_matching>:
1980         New argument expansion_notify.  All uses updated.
1981         (expand_symtabs_matching): New argument expansion_notify.
1982         All uses updated.
1983         * symfile-debug.c (debug_qf_expand_symtabs_matching):
1984         Also print expansion notify.
1985         * symtab.c (expand_symtabs_matching_via_partial): Call
1986         expansion_notify whenever a partial symbol table is expanded.
1987         * dwarf2read.c (dw2_expand_symtabs_matching): Call
1988         expansion_notify whenever a symbol table is instantiated.
1989
1990 2015-01-31  Doug Evans  <xdje42@gmail.com>
1991
1992         * cli-out.c: #include completer.h, readline/readline.h.
1993         (cli_mld_crlf, cli_mld_putch, cli_mld_puts): New functions.
1994         (cli_mld_flush, cld_mld_erase_entire_line): Ditto.
1995         (cli_mld_beep, cli_mld_read_key, cli_display_match_list): Ditto.
1996         * cli-out.h (cli_display_match_list): Declare.
1997         * completer.c (MB_INVALIDCH, MB_NULLWCH): New macros.
1998         (ELLIPSIS_LEN): Ditto.
1999         (gdb_get_y_or_n, gdb_display_match_list_pager): New functions.
2000         (gdb_path_isdir, gdb_printable_part, gdb_fnwidth): Ditto.
2001         (gdb_fnprint, gdb_print_filename): Ditto.
2002         (gdb_complete_get_screenwidth, gdb_display_match_list_1): Ditto.
2003         (gdb_display_match_list): Ditto.
2004         * completer.h (mld_crlf_ftype, mld_putch_ftype): New typedefs.
2005         (mld_puts_ftype, mld_flush_ftype, mld_erase_entire_line_ftype): Ditto.
2006         (mld_beep_ftype, mld_read_key_ftype): Ditto.
2007         (match_list_displayer): New struct.
2008         (gdb_display_match_list): Declare.
2009         * top.c (init_main): Set rl_completion_display_matches_hook.
2010         * tui/tui-io.c: #include completer.h.
2011         (printable_part, PUTX, print_filename, get_y_or_n): Delete.
2012         (tui_mld_crlf, tui_mld_putch, tui_mld_puts): New functions.
2013         (tui_mld_flush, tui_mld_erase_entire_line, tui_mld_beep): Ditto.
2014         (tui_mld_getc, tui_mld_read_key): Ditto.
2015         (tui_rl_display_match_list): Rewrite.
2016         (tui_handle_resize_during_io): New arg for_completion.  All callers
2017         updated.
2018
2019 2015-01-31  Doug Evans  <xdje42@gmail.com>
2020
2021         Add symbol lookup cache.
2022         * NEWS: Document new options and commands.
2023         * symtab.c (symbol_cache_key): New static global.
2024         (DEFAULT_SYMBOL_CACHE_SIZE, MAX_SYMBOL_CACHE_SIZE): New macros.
2025         (SYMBOL_LOOKUP_FAILED): New macro.
2026         (symbol_cache_slot_state): New enum.
2027         (block_symbol_cache): New struct.
2028         (symbol_cache): New struct.
2029         (new_symbol_cache_size, symbol_cache_size): New static globals.
2030         (hash_symbol_entry, eq_symbol_entry): New functions.
2031         (symbol_cache_byte_size, resize_symbol_cache): New functions.
2032         (make_symbol_cache, free_symbol_cache): New functions.
2033         (get_symbol_cache, symbol_cache_cleanup): New function.
2034         (set_symbol_cache_size, set_symbol_cache_size_handler): New functions.
2035         (symbol_cache_lookup, symbol_cache_clear_slot): New function.
2036         (symbol_cache_mark_found, symbol_cache_mark_not_found): New functions.
2037         (symbol_cache_flush, symbol_cache_dump): New functions.
2038         (maintenance_print_symbol_cache): New function.
2039         (maintenance_flush_symbol_cache): New function.
2040         (symbol_cache_stats): New function.
2041         (maintenance_print_symbol_cache_statistics): New function.
2042         (symtab_new_objfile_observer): New function.
2043         (symtab_free_objfile_observer): New function.
2044         (lookup_static_symbol, lookup_global_symbol): Use symbol cache.
2045         (_initialize_symtab): Init symbol_cache_key.  New parameter
2046         maint symbol-cache-size.  New maint commands print symbol-cache,
2047         print symbol-cache-statistics, flush-symbol-cache.
2048         Install new_objfile, free_objfile observers.
2049
2050 2015-01-31  Joel Brobecker  <brobecker@adacore.com>
2051
2052         PR symtab/17855
2053         * symfile.c (clear_symtab_users): Move call to breakpoint_re_set
2054         to end.
2055
2056 2015-01-31  Doug Evans  <xdje42@gmail.com>
2057
2058         * NEWS: Mention inlined scripts in .debug_gdb_scripts section.
2059         * auto-load.c: #include ctype.h.
2060         (struct auto_load_pspace_info): Replace member loaded_scripts with
2061         new members loaded_script_files, loaded_script_texts.
2062         (auto_load_pspace_data_cleanup): Update.
2063         (init_loaded_scripts_info): Update.
2064         (get_auto_load_pspace_data_for_loading): Update.
2065         (maybe_add_script_file): Renamed from maybe_add_script.  All callers
2066         updated.
2067         (maybe_add_script_text): New function.
2068         (clear_section_scripts): Update.
2069         (source_script_file, execute_script_contents): New functions.
2070         (source_section_scripts): Add support for
2071         SECTION_SCRIPT_ID_PYTHON_TEXT, SECTION_SCRIPT_ID_GUILE_TEXT.
2072         (print_scripts): New function.
2073         (auto_load_info_scripts): Also print inlined scripts.
2074         (maybe_print_unsupported_script_warning): Renamed from
2075         unsupported_script_warning_print.  All callers updated.
2076         (maybe_print_script_not_found_warning): Renamed from
2077         script_not_found_warning_print.  All callers updated.
2078         * extension-priv.h (struct extension_language_script_ops): New member
2079         objfile_script_executor.
2080         * extension.c (ext_lang_objfile_script_executor): New function.
2081         * extension.h (objfile_script_executor_func): New typedef.
2082         (ext_lang_objfile_script_executor): Declare.
2083         * guile/guile-internal.h (gdbscm_execute_objfile_script): Declare.
2084         * guile/guile.c (guile_extension_script_ops): Update.
2085         * guile/scm-objfile.c (gdbscm_execute_objfile_script): New function.
2086         * python/python.c (python_extension_script_ops): Update.
2087         (gdbpy_execute_objfile_script): New function.
2088
2089 2015-01-31  Eli Zaretskii  <eliz@gnu.org>
2090
2091         * tui/tui-io.c (tui_expand_tabs): New function.
2092         (tui_puts, tui_redisplay_readline): Expand TABs into the
2093         appropriate number of spaces.
2094         * tui/tui-regs.c: Include tui-io.h.
2095         (tui_register_format): Call tui_expand_tabs to expand TABs into
2096         the appropriate number of spaces.
2097         * tui/tui-io.h: Add prototype for tui_expand_tabs.
2098
2099 2015-01-30  Doug Evans  <dje@google.com>
2100
2101         * NEWS: "info source" command now display producer string if present.
2102         * source.c (source_info): Print producer string if present.
2103
2104 2015-01-30  Simon Marchi  <simon.marchi@ericsson.com>
2105
2106         * varobj.c (varobj_delete): Fix comment.
2107
2108 2015-01-30  Simon Marchi  <simon.marchi@ericsson.com>
2109
2110         * varobj.c (create_child): Modify comment.
2111
2112 2015-01-30  Simon Marchi  <simon.marchi@ericsson.com>
2113
2114         * ada-varobj.c (ada_number_of_children): Constify struct varobj *
2115         parameter.
2116         (ada_name_of_variable): Same.
2117         (ada_path_expr_of_child): Same.
2118         (ada_value_of_variable): Same.
2119         (ada_value_is_changeable_p): Same.
2120         (ada_value_has_mutated): Same.
2121         * c-varobj.c (varobj_is_anonymous_child): Same.
2122         (c_is_path_expr_parent): Same.
2123         (c_number_of_children): Same.
2124         (c_name_of_variable): Same.
2125         (c_path_expr_of_child): Same.
2126         (get_type): Same.
2127         (c_value_of_variable): Same.
2128         (cplus_number_of_children): Same.
2129         (cplus_name_of_variable): Same.
2130         (cplus_path_expr_of_child): Same.
2131         (cplus_value_of_variable): Same.
2132         * jv-varobj.c (java_number_of_children): Same.
2133         (java_name_of_variable): Same.
2134         (java_path_expr_of_child): Same.
2135         (java_value_of_variable): Same.
2136         * varobj.c (number_of_children): Same.
2137         (name_of_variable): Same.
2138         (is_root_p): Same.
2139         (varobj_ensure_python_env): Same.
2140         (varobj_get_objname): Same.
2141         (varobj_get_expression): Same.
2142         (varobj_get_display_format): Same.
2143         (varobj_get_display_hint): Same.
2144         (varobj_has_more): Same.
2145         (varobj_get_thread_id): Same.
2146         (varobj_get_frozen): Same.
2147         (dynamic_varobj_has_child_method): Same.
2148         (varobj_get_gdb_type): Same.
2149         (is_path_expr_parent): Same.
2150         (varobj_default_is_path_expr_parent): Same.
2151         (varobj_get_language): Same.
2152         (varobj_get_attributes): Same.
2153         (varobj_is_dynamic_p): Same.
2154         (varobj_get_child_range): Same.
2155         (varobj_value_has_mutated): Same.
2156         (varobj_get_value_type): Same.
2157         (number_of_children): Same.
2158         (name_of_variable): Same.
2159         (check_scope): Same.
2160         (varobj_editable_p): Same.
2161         (varobj_value_is_changeable_p): Same.
2162         (varobj_floating_p): Same.
2163         (varobj_default_value_is_changeable_p): Same.
2164
2165 2015-01-30  Simon Marchi  <simon.marchi@ericsson.com>
2166
2167         * varobj.c (varobj_get_path_expr): Set var->path_expr.
2168         * c-varobj.c (c_path_expr_of_child): Set local var instead of
2169         child->path_expr.
2170         (cplus_path_expr_of_child): Same.
2171
2172 2015-01-30  Simon Marchi  <simon.marchi@ericsson.com>
2173
2174         * mi-cmd-var.c (print_varobj): Free varobj_get_expression
2175         result.
2176         (mi_cmd_var_info_expression): Same.
2177         * varobj.c (varobj_get_expression): Mention in the comment that
2178         the result must by freed by the caller.
2179
2180 2015-01-30  Simon Marchi  <simon.marchi@ericsson.com>
2181
2182         * mi/mi-cmd-var.c (mi_cmd_var_info_type): Free result of
2183         varobj_get_type.
2184         (varobj_update_one): Same.
2185         * varobj.c (update_type_if_necessary): Free curr_type_str and
2186         new_type_str.
2187         (varobj_get_type): Specify in comment that the result needs to be
2188         freed by the caller.
2189
2190 2015-01-29  Doug Evans  <dje@google.com>
2191
2192         PR symtab/17890
2193         * dwarf2read.c (dwarf_decode_line_header): Punt if version > 4.
2194
2195 2015-01-25  Mark Wielaard  <mjw@redhat.com>
2196
2197         * dwarf2read.c (checkproducer): Call producer_is_gcc.
2198         * utils.c (producer_is_gcc_ge_4): Likewise.
2199         (producer_is_gcc): New function.
2200         * utils.h (producer_is_gcc): New declaration.
2201
2202 2015-01-29  Joel Brobecker  <brobecker@adacore.com>
2203
2204         * gdbtypes.h (struct dynamic_prop): New PROP_ADDR_OFFSET enum
2205         kind.
2206         * gdbtypes.c (resolve_dynamic_type_internal): Replace "addr"
2207         parameter by "addr_stack" parameter.
2208         (resolve_dynamic_range): Replace "addr" parameter by
2209         "stack_addr" parameter.  Update function documentation.
2210         Update code accordingly.
2211         (resolve_dynamic_array, resolve_dynamic_union)
2212         (resolve_dynamic_struct, resolve_dynamic_type_internal): Likewise.
2213         (resolve_dynamic_type): Update code, following the changes made
2214         to resolve_dynamic_type_internal's interface.
2215         * dwarf2loc.h (struct property_addr_info): New.
2216         (dwarf2_evaluate_property): Replace "address" parameter
2217         by "addr_stack" parameter.  Adjust function documentation.
2218         (struct dwarf2_offset_baton): New.
2219         (struct dwarf2_property_baton): Update documentation of
2220         field "referenced_type" to be more general. New field
2221         "offset_info" in union data field.
2222         * dwarf2loc.c (dwarf2_evaluate_property): Replace "address"
2223         parameter by "addr_stack" parameter.  Adjust code accordingly.
2224         Add support for PROP_ADDR_OFFSET properties.
2225         * dwarf2read.c (attr_to_dynamic_prop): Add support for
2226         DW_AT_data_member_location attributes as well.  Use case
2227         statements instead of if/else condition.
2228
2229 2015-01-29  Joel Brobecker  <brobecker@adacore.com>
2230
2231         * ada-varobj.c (ada_varobj_get_array_number_of_children):
2232         Return zero if PARENT_VALUE is NULL and parent_type's
2233         range type is dynamic.
2234
2235 2015-01-29  Joel Brobecker  <brobecker@adacore.com>
2236
2237         * gdbtypes.c (is_dynamic_type_internal) <TYPE_CODE_RANGE>: Return
2238         nonzero if the type's subtype is dynamic.
2239         (resolve_dynamic_range): Also resolve the range's subtype.
2240
2241 2015-01-29  Alexander Klimov  <alserkli@inbox.ru>  (tiny patch)
2242
2243         Pushed by Joel Brobecker  <brobecker@adacore.com>.
2244         * symfile.c (unmap_overlay_command): Initialize sec to NULL.
2245
2246 2015-01-27  Doug Evans  <dje@google.com>
2247
2248         * NEWS: Mention gdb.Objfile.username.
2249         * python/py-objfile.c (objfpy_get_username): New function.
2250         (objfile_getset): Add "username".
2251
2252 2015-01-24  Mark Wielaard  <mjw@redhat.com>
2253
2254         * stack.c (return_command): Markup warning message with _.
2255
2256 2015-01-24  Doug Evans  <xdje42@gmail.com>
2257
2258         * gdbtypes.h (TYPE_TYPE_SPECIFIC): Delete.
2259
2260 2015-01-24  Jan Kratochvil  <jan.kratochvil@redhat.com>
2261
2262         Fix 100x slowdown regression on DWZ files.
2263         * dwarf2read.c (struct dwarf2_per_objfile): Add line_header_hash.
2264         (struct line_header): Add offset and offset_in_dwz.
2265         (dwarf_decode_lines): Add parameter decode_mapping to the declaration.
2266         (free_line_header_voidp): New declaration.
2267         (line_header_hash, line_header_hash_voidp, line_header_eq_voidp): New
2268         functions.
2269         (dwarf2_build_include_psymtabs): Update dwarf_decode_lines caller.
2270         (handle_DW_AT_stmt_list): Use line_header_hash.
2271         (free_line_header_voidp): New function.
2272         (dwarf_decode_line_header): Initialize offset and offset_in_dwz.
2273         (dwarf_decode_lines): New parameter decode_mapping, use it.
2274         (dwarf2_free_objfile): Free line_header_hash.
2275
2276 2015-01-23  Simon Marchi  <simon.marchi@ericsson.com>
2277
2278         PR gdb/17416
2279         * valops.c (value_rtti_indirect_type): Catch exception thrown by
2280         value_ind.
2281
2282 2015-01-15  Mark Wielaard  <mjw@redhat.com>
2283
2284         * dwarf2read.c (read_subroutine_type): Set TYPE_NO_RETURN from
2285         DW_AT_noreturn.
2286         * gdbtypes.h (struct func_type): Add is_noreturn field flag. Make
2287         calling_convention an 8 bit bit field.
2288         (TYPE_NO_RETURN): New macro.
2289         * infcmd.c (finish_command): Query if function does not return
2290         normally.
2291         * stack.c (return_command): Likewise.
2292
2293 2015-01-23  Pedro Alves  <palves@redhat.com>
2294
2295         * linux-nat.c (linux_is_async_p): New macro.
2296         (linux_nat_is_async_p):
2297         (linux_nat_terminal_inferior): Check whether the target can async
2298         instead of whether it is already async.
2299         (linux_nat_terminal_ours): Don't check whether the target is
2300         async.
2301         (linux_async_pipe): Use linux_is_async_p.
2302
2303 2015-01-22  Jan Kratochvil  <jan.kratochvil@redhat.com>
2304
2305         * NEWS (Changes since GDB 7.9): Add 'thread apply all' option
2306         '-ascending'.
2307         * thread.c (tp_array_compar_ascending, tp_array_compar): New.
2308         (thread_apply_all_command): Parse CMD for tp_array_compar_ascending.
2309         Sort tp_array using tp_array_compar.
2310         (_initialize_thread): Extend thread_apply_all_command help.
2311
2312 2015-01-22  Jan Kratochvil  <jan.kratochvil@redhat.com>
2313
2314         * corelow.c (core_open): Call also thread_command.
2315         * gdbthread.h (thread_command): New prototype moved from ...
2316         * thread.c (thread_command): ... here.
2317         (thread_command): Make it global.
2318
2319 2015-01-22  Pedro Alves  <palves@redhat.com>
2320
2321         * configure.ac [*mingw32*]: Check $curses_found instead of
2322         $prefer_curses.
2323         * configure: Regenerate.
2324         * windows-termcap.c: Remove HAVE_CURSES_H, HAVE_NCURSES_H and
2325         HAVE_NCURSES_NCURSES_H checks.
2326
2327 2015-01-22  Eli Zaretskii  <eliz@gnu.org>
2328
2329         * tui/tui.c (tui_enable) [__MINGW32__]: If the call to 'newterm'
2330         fails with the 1st arg NULL, try again with "unknown".  Don't test
2331         the "cup" capability: it isn't supported by the Windows port of
2332         ncurses, but the Windows console driver is still capable of
2333         supporting TUI.
2334
2335 2015-01-22  Jan Kratochvil  <jan.kratochvil@redhat.com>
2336
2337         * compile/compile.c (_initialize_compile): Use -fPIE for compile_args.
2338
2339 2015-01-22  Eli Zaretskii  <eliz@gnu.org>
2340
2341         * Makefile.in (HFILES_NO_SRCDIR): Remove ada-varobj.h.
2342         (ALLDEPFILES): Remove irix5-nat.c.  These two are part of the
2343         reason that "make TAGS" is broken.
2344
2345 2015-01-22  Chen Gang  <gang.chen.5i5j@gmail.com>
2346
2347         * hppa-tdep.c (inst_saves_gr): Fix logical working flow issues
2348         and check additional store instructions.
2349
2350 2015-01-21  Wei-cheng Wang  <cole945@gmail.com>
2351
2352         * MAINTAINERS (Write After Approval): Add "Wei-cheng Wang".
2353
2354 2015-01-21  Wei-cheng Wang  <cole945@gmail.com>
2355
2356         * ppc-linux-tdep.c (ppc_skip_trampoline_code,
2357         ppc_canonicalize_syscall, ppc_linux_syscall_record,
2358         ppc_linux_record_signal, ppc_init_linux_record_tdep): Add comments.
2359         * ppc64-tdep.c (ppc64_skip_trampoline_code): Likewise.
2360         * rs6000-tdep.c (rs6000_epilogue_frame_cache,
2361         rs6000_epilogue_frame_this_id, rs6000_epilogue_frame_prev_register,
2362         rs6000_epilogue_frame_sniffer, ppc_record_vsr, ppc_process_record_op4,
2363         ppc_process_record_op19, ppc_process_record_op31,
2364         ppc_process_record_op59, ppc_process_record_op60,
2365         ppc_process_record_op63): Likewise.
2366
2367 2015-01-20  Joel Brobecker  <brobecker@adacore.com>
2368
2369         * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason_string)
2370         (linux_ptrace_test_ret_to_nx): Use safe_strerror instead of
2371         strerror.
2372
2373 2015-01-20  Wei-cheng Wang  <cole945@gmail.com>
2374
2375         * rs6000-tdep.c (ppc_process_record_op4, ppc_process_record_op19,
2376         ppc_process_record_op31, ppc_process_record_op59,
2377         ppc_process_record_op60, ppc_process_record_op63,
2378         ppc_process_record): Fix -Wformat warning.
2379         * rs6000-tdep.c (rs6000_epilogue_frame_cache, ppc_process_record_op60):
2380         Remove unused variables.
2381
2382 2015-01-20  Chen Gang  <gang.chen.5i5j@gmail.com>
2383
2384         * MAINTAINERS (Write After Approval): Add "Chen Gang".
2385
2386 2015-01-19  Eli Zaretskii  <eliz@gnu.org>
2387
2388         * configure.ac [*mingw32*]: Only add windows-termcap.o to
2389         CONFIG_OBS if not building with a curses library.
2390         * configure: Regenerate.
2391
2392         * windows-termcap.c: Include defs.h.  Make the whole body empty if
2393         either one of HAVE_CURSES_H or HAVE_NCURSES_H or
2394         HAVE_NCURSES_NCURSES_H is defined.
2395
2396 2015-01-19  Joel Brobecker  <brobecker@adacore.com>
2397
2398         * rs6000-tdep.c (rs6000_gdbarch_init): Move divide operator
2399         from end of line to start of next line.
2400
2401 2015-01-17  Wei-cheng Wang  <cole945@gmail.com>
2402
2403         * ppc-linux-tdep.c (ppc_skip_trampoline_code):
2404         Scan PLT stub backward for reverse debugging.
2405         * ppc64-tdep.c (ppc64_skip_trampoline_code): Likewise.
2406
2407 2015-01-17  Wei-cheng Wang  <cole945@gmail.com>
2408             Ulrich Weigand  <uweigand@de.ibm.com>
2409
2410         * configure.tgt (powerpc*-*-linux): Add linux-record.o to
2411         gdb_target_obs.
2412         (ppc_linux_record_tdep, ppc64_linux_record_tdep): New for linux syscall
2413         record.
2414         (ppc_canonicalize_syscall, ppc_linux_syscall_record,
2415         ppc_linux_record_signal, ppc_init_linux_record_tdep): New functions.
2416         (ppc_linux_init_abi): Set process_record, process_record_signal.
2417         * ppc-tdep.h (struct gdbarch_tdep): Add ppc_syscall_record and
2418         ppc_linux_record_tdep to gdbarch_tdep.
2419         (ppc_process_record): New declaration.
2420         * rs6000-tdep.c (ppc_record_vsr, ppc_process_record_op4,
2421         ppc_process_record_op19, ppc_process_record_op31,
2422         ppc_process_record_op59, ppc_process_record_op60,
2423         ppc_process_record_op63, ppc_process_record): New functions.
2424
2425 2015-01-17  Wei-cheng Wang  <cole945@gmail.com>
2426
2427         * rs6000-tdep.c (rs6000_in_function_epilogue_p): Rename to
2428         rs6000_in_function_epilogue_frame_p and add an argument
2429         for frame_info.
2430         (rs6000_epilogue_frame_cache, rs6000_epilogue_frame_this_id,
2431         rs6000_epilogue_frame_prev_register, rs6000_epilogue_frame_sniffer):
2432         New functions.
2433         (rs6000_epilogue_frame_unwind): New.
2434         (rs6000_gdbarch_init): Append epilogue unwinder.
2435
2436 2015-01-16  Sergio Durigan Junior  <sergiodj@redhat.com>
2437
2438         * nat/linux-personality.c: Replace "#ifndef
2439         HAVE_DECL_ADDR_NO_RANDOMIZE" by "#if
2440         !HAVE_DECL_ADDR_NO_RANDOMIZE", fixing a regression in RHEL-5
2441         systems.
2442
2443 2015-01-16  Eli Zaretskii  <eliz@gnu.org>
2444
2445         * tui/tui-win.c (tui_rehighlight_all, tui_set_var_cmd): New
2446         functions.
2447         (_initialize_tui_win) <border-kind, border-mode>:
2448         <active-border-mode>: Use tui_set_var_cmd as the "set" function.
2449         (tui_set_tab_width_command): Fix the commentary.
2450
2451         * tui/tui-win.h: Add prototype for tui_rehighlight_all.
2452
2453         * tui/tui-win.c (tui_scroll_left_command, tui_scroll_right_command):
2454         Doc fix.
2455         (tui_set_tab_width_command): Delete and recreate the source and
2456         the disassembly windows, to show the effect of the changed tab
2457         size immediately.
2458
2459         * tui/tui-data.h (LINE_PREFIX): Make shorter
2460         (MAX_PID_WIDTH): Enlarge from 14 to 19, to leave enough space for
2461         "Thread NNNNN.XXXX" thread ID notation on Windows.
2462
2463 2015-01-16  Jan Kratochvil  <jan.kratochvil@redhat.com>
2464
2465         Fix gcc-5 compilation.
2466         * hppa-tdep.c (inst_saves_gr): Fix parentheses typo.
2467
2468 2015-01-15  Sergio Durigan Junior  <sergiodj@redhat.com>
2469
2470         * Makefile.in (HFILES_NO_SRCDIR): Add nat/linux-personality.h.
2471         (linux-personality.o): New rule.
2472         * common/common-defs.h: Include <stdint.h>.
2473         * config/aarch64/linux.mh (NATDEPFILES): Include
2474         linux-personality.o.
2475         * config/alpha/alpha-linux.mh (NATDEPFILES): Likewise.
2476         * config/arm/linux.mh (NATDEPFILES): Likewise.
2477         * config/i386/linux64.mh (NATDEPFILES): Likewise.
2478         * config/i386/linux.mh (NATDEPFILES): Likewise.
2479         * config/ia64/linux.mh (NATDEPFILES): Likewise.
2480         * config/m32r/linux.mh (NATDEPFILES): Likewise.
2481         * config/m68k/linux.mh (NATDEPFILES): Likewise.
2482         * config/mips/linux.mh (NATDEPFILES): Likewise.
2483         * config/pa/linux.mh (NATDEPFILES): Likewise.
2484         * config/powerpc/linux.mh (NATDEPFILES): Likewise.
2485         * config/powerpc/ppc64-linux.mh (NATDEPFILES): Likewise.
2486         * config/powerpc/spu-linux.mh (NATDEPFILES): Likewise.
2487         * config/s390/linux.mh (NATDEPFILES): Likewise.
2488         * config/sparc/linux64.mh (NATDEPFILES): Likewise.
2489         * config/sparc/linux.mh (NATDEPFILES): Likewise.
2490         * config/tilegx/linux.mh (NATDEPFILES): Likewise.
2491         * config/xtensa/linux.mh (NATDEPFILES): Likewise.
2492         * defs.h: Remove #include <stdint.h> (moved to
2493         common/common-defs.h).
2494         * linux-nat.c: Include nat/linux-personality.h.  Remove #include
2495         <sys/personality.h>; do not define ADDR_NO_RANDOMIZE (moved to
2496         nat/linux-personality.c).
2497         (linux_nat_create_inferior): Remove code to disable address space
2498         randomization (moved to nat/linux-personality.c).  Create cleanup
2499         to disable address space randomization.
2500         * nat/linux-personality.c: New file.
2501         * nat/linux-personality.h: Likewise.
2502
2503 2015-01-15  Sergio Durigan Junior  <sergiodj@redhat.com>
2504
2505         * Makefile.in (ALLDEPFILES): Including common/mingw-strerror.c and
2506         common/posix-strerror.c.
2507         (posix-strerror.o): New rule.
2508         (mingw-strerror.o): Likewise.
2509         * common/common-utils.h (safe_strerror): Move prototype to here,
2510         from utils.h.
2511         * common/common.host: New file.
2512         * common/mingw-strerror.c: Likewise.
2513         * common/posix-strerror.c: Likewise.
2514         * configure: Regenerated.
2515         * configure.ac: Source common/common.host.  Add variable
2516         common_host_obs to gdb_host_obs.
2517         * contrib/ari/gdb_ari.sh: Mention gdb/common/mingw-strerror.c and
2518         gdb/common/posix-strerror.c when warning about the use of
2519         strerror.
2520         * mingw-hdep.c (safe_strerror): Remove definition; move it to
2521         common/mingw-strerror.c.
2522         * posix-hdep.c (safe_strerror): Remove definition; move it to
2523         common/posix-hdep.c.
2524         * utils.h (safe_strerror): Remove prototype; move to
2525         common/common-utils.h.
2526
2527 2015-01-15  Joel Brobecker  <brobecker@adacore.com>
2528
2529         GDB 7.8.2 released.
2530
2531 2015-01-15  Joel Brobecker  <brobecker@adacore.com>
2532
2533         * ada-lang.c (ada_array_bound_from_type): Ignore array's parallel
2534         ___XA type if the array has already been fixed.
2535
2536 2015-01-14  Yao Qi  <yao@codesourcery.com>
2537
2538         * Makefile.in (ppc-linux.o): New rule.
2539         * config/powerpc/ppc64-linux.mh (NATDEPFILES): Add ppc-linux.o.
2540         * configure.ac: AC_CHECK_FUNCS(getauxval).
2541         * config.in: Re-generated.
2542         * configure: Re-generated.
2543         * nat/ppc-linux.h [__powerpc64__] (ppc64_64bit_inferior_p):
2544         Declare.
2545         * nat/ppc-linux.c: New file.
2546         * ppc-linux-nat.c (ppc_linux_target_wordsize) [__powerpc64__]:
2547         Call ppc64_64bit_inferior_p.
2548
2549 2015-01-14  Yao Qi  <yao@codesourcery.com>
2550
2551         * ppc-linux-nat.c (PT_ORIG_R3, PT_TRAP): Move to
2552         nat/ppc-linux.h.
2553         (PPC_FEATURE_CELL, PPC_FEATURE_BOOKE): Likewise.
2554         (PPC_FEATURE_HAS_DFP): Likewise.
2555         (PTRACE_GETVRREGS, PTRACE_SETVRREGS): Likewise.
2556         (PTRACE_GETVSXREGS, PTRACE_SETVSXREGS): Likewise.
2557         (PTRACE_GETEVRREGS, PTRACE_SETEVRREGS): Likewise.
2558         Include "nat/ppc-linux.h".
2559         * nat/ppc-linux.h: New file.
2560         * Makefile.in (HFILES_NO_SRCDIR): Add nat/ppc-linux.h.
2561
2562 2015-01-14  Pedro Alves  <palves@redhat.com>
2563
2564         PR gdb/17525
2565         * breakpoint.c: Include "interps.h".
2566         (bpstat_do_actions_1): Also check whether the interpreter is
2567         async.
2568
2569 2015-01-14  Pedro Alves  <palves@redhat.com>
2570
2571         PR cli/17828
2572         * infrun.c (reinstall_readline_callback_handler_cleanup): Don't
2573         reinstall if the interpreter is sync.
2574
2575 2015-01-13  Doug Evans  <dje@google.com>
2576
2577         * objfiles.c (objfile_filename): New function.
2578         * objfiles.h (objfile_filename): Declare it.
2579         (objfile_name): Add function comment.
2580         * python/py-objfile.c (objfpy_lookup_objfile_by_name): Try both the
2581         bfd file name (which may be realpath'd), and the original name.
2582
2583 2015-01-13  Joel Brobecker  <brobecker@adacore.com>
2584
2585         * NEWS: Create a new section for the next release branch.
2586         Rename the section of the current branch, now that it has
2587         been cut.
2588
2589 2015-01-13  Joel Brobecker  <brobecker@adacore.com>
2590
2591         GDB 7.9 branch created (92fc2e6978d9a7c8324c7e851dbee59e22ec7a37):
2592         * version.in: Bump version to 7.9.50.DATE-cvs.
2593
2594 2015-01-13  Joel Brobecker  <brobecker@adacore.com>
2595
2596         * nat/linux-procfs.c (linux_proc_attach_tgid_threads):
2597         Remove trailing new-line in argument of call to warning.
2598
2599 2015-01-13  Joel Brobecker  <brobecker@adacore.com>
2600
2601         * linux-nat.c (attach_proc_task_lwp_callback): Remove trailing
2602         new-line in argument of call to "warning".
2603
2604 2015-01-13  Joel Brobecker  <brobecker@adacore.com>
2605
2606         * ada-lang.c (ada_lookup_symbol_nonlocal): If name not found
2607         in static block, then try searching for primitive types.
2608
2609 2015-01-12  Patrick Palka  <patrick@parcs.ath.cx>
2610
2611         * top.h (gdb_add_history): Declare.
2612         * top.c (command_count): New variable.
2613         (gdb_add_history): New function.
2614         (gdb_safe_append_history): New static function.
2615         (quit_force): Call it.
2616         (command_line_input): Use gdb_add_history instead of
2617         add_history.
2618         * event-top.c (command_line_handler): Likewise.
2619
2620 2015-01-12  James Clarke  <jrtc27@jrtc27.com>  (tiny patch)
2621
2622         PR gdb/17046
2623         * darwin-nat.c: Replace <machine/setjmp.h> #include by
2624         <setjmp.h> #include.
2625
2626 2015-01-11  Doug Evans  <xdje42@gmail.com>
2627
2628         * dwarf2read.c (compute_delayed_physnames): Use TYPE_FN_FIELD_PHYSNAME.
2629
2630 2015-01-11  Doug Evans  <xdje42@gmail.com>
2631
2632         PR gdb/15830
2633         * NEWS: The "maint demangle" command is renamed as "demangle".
2634         * demangle.c: #include cli/cli-utils.h, language.h.
2635         (demangle_command): New function.
2636         (_initialize_demangle): Add new command "demangle".
2637         * maint.c (maintenance_demangle): Stub out.
2638         (_initialize_maint_cmds): Update help text for "maint demangle",
2639         and mark as deprecated.
2640
2641 2015-01-11  Mark Kettenis  <kettenis@gnu.org>
2642
2643         * inf-ptrace.c (inf_ptrace_follow_fork): Adjust now that
2644         inferior_thread is a function.
2645
2646 2015-01-09  Patrick Palka  <patrick@parcs.ath.cx>
2647
2648         * Makefile.in (.y.c): Don't munge yacc's #line
2649         directives.
2650
2651 2015-01-09  Patrick Palka  <patrick@parcs.ath.cx>
2652
2653         * utils.c (defaulted_query): Rewrite to use gdb_readline_wrapper
2654         to prompt for input.
2655         * tui/tui-hooks.c (tui_query_hook): Remove.
2656         (tui_install_hooks): Don't set deprecated_query_hook.
2657         * tui/tui-io.c (tui_redisplay_readline): Fix off-by-one error in
2658         height calculation.  Always update the command window's cur_line.
2659
2660 2015-01-09  Pedro Alves  <palves@redhat.com>
2661
2662         * breakpoint.c (hardware_breakpoint_inserted_here_p): New
2663         function.
2664         * breakpoint.h (hardware_breakpoint_inserted_here_p): New
2665         declaration.
2666         * linux-nat.c (linux_nat_status_is_event): Move higher up in file.
2667         (linux_resume_one_lwp): Store the thread's PC.  Adjust to clear
2668         stop_reason.
2669         (check_stopped_by_watchpoint): New function.
2670         (save_sigtrap): Reimplement.
2671         (linux_nat_stopped_by_watchpoint): Adjust.
2672         (linux_nat_lp_status_is_event): Delete.
2673         (stop_wait_callback): Only call save_sigtrap after storing the
2674         pending status.
2675         (status_callback): If the thread had been stopped for a breakpoint
2676         that has since been removed, discard the event and resume the LWP.
2677         (count_events_callback, select_event_lwp_callback): Use
2678         lwp_status_pending_p instead of linux_nat_lp_status_is_event.
2679         (cancel_breakpoint): Rename to ...
2680         (check_stopped_by_breakpoint): ... this.  Record whether the LWP
2681         stopped for a software breakpoint or hardware breakpoint.
2682         (select_event_lwp): Only give preference to the stepping LWP in
2683         all-stop mode.  Adjust comments.
2684         (stop_and_resume_callback): Remove references to new_pending_p.
2685         (linux_nat_filter_event): Likewise.  Leave exit events of the
2686         leader thread pending here.  Handle signal short circuiting here.
2687         Only call save_sigtrap after storing the pending waitstatus.
2688         (linux_nat_wait_1): Remove 'retry' label.  Remove references to
2689         new_pending.  Don't handle leaving events the caller is not
2690         interested in pending here, nor handle signal short-circuiting
2691         here.  Also give equal priority to all LWPs that have had events
2692         in non-stop mode.  If reporting a software breakpoint event,
2693         unadjust the LWP's PC.
2694         * linux-nat.h (enum lwp_stop_reason): New.
2695         (struct lwp_info) <stop_pc>: New field.
2696         (struct lwp_info) <stopped_by_watchpoint>: Delete field.
2697         (struct lwp_info) <stop_reason>: New field.
2698         * x86-linux-nat.c (x86_linux_prepare_to_resume): Adjust.
2699
2700 2015-01-09  Pedro Alves  <palves@redhat.com>
2701
2702         * linux-nat.c (linux_handle_extended_wait) <PTRACE_EVENT_EXEC>:
2703         Set the LWP's 'resumed' flag.
2704
2705 2015-01-09  Pedro Alves  <palves@redhat.com>
2706
2707         * linux-nat.c (linux_resume_one_lwp): New function.
2708         (resume_lwp): Use lwp_status_pending_p and linux_resume_one_lwp.
2709         (linux_nat_resume): Use lwp_status_pending_p and
2710         linux_resume_one_lwp.
2711         (linux_handle_syscall_trap): Use linux_resume_one_lwp.
2712         (linux_handle_extended_wait): Use linux_resume_one_lwp.
2713         (status_callback, running_callback): Use lwp_status_pending_p.
2714         (lwp_status_pending_p): New function.
2715         (stop_and_resume_callback): Use lwp_status_pending_p.
2716         (linux_nat_filter_event): Use linux_resume_one_lwp.
2717         (linux_nat_wait_1): Always use status_callback to look for an LWP
2718         with a pending status.  Use linux_resume_one_lwp.
2719         (resume_stopped_resumed_lwps): Use lwp_status_pending_p and
2720         linux_resume_one_lwp.
2721
2722 2015-01-09  Pedro Alves  <palves@redhat.com>
2723
2724         * breakpoint.c (bp_location_inserted_here_p): New function,
2725         factored out from ...
2726         (breakpoint_inserted_here_p): ... here.  Use
2727         ALL_BP_LOCATIONS_AT_ADDR.
2728         (software_breakpoint_inserted_here_p): Use
2729         bp_location_inserted_here_p and ALL_BP_LOCATIONS_AT_ADDR.
2730
2731 2014-01-09  Pedro Alves  <palves@redhat.com>
2732
2733         Skip enabling event reporting if the kernel supports
2734         PTRACE_EVENT_CLONE.
2735         * linux-thread-db.c: Include "nat/linux-ptrace.h".
2736         (thread_db_use_events): New function.
2737         (try_thread_db_load_1): Check thread_db_use_events before enabling
2738         event reporting.
2739         (update_thread_state): New function.
2740         (attach_thread): Use it.  Check thread_db_use_events before
2741         enabling event reporting.
2742         (thread_db_detach): Check thread_db_use_events before disabling
2743         event reporting.
2744         (find_new_threads_callback): Check thread_db_use_events before
2745         enabling event reporting.  Update the thread's state if not using
2746         libthread_db events.
2747
2748 2015-01-09  Pedro Alves  <palves@redhat.com>
2749
2750         * linux-nat.c (lin_lwp_attach_lwp): Assert that the lwp id we're
2751         about to wait for is > 0.
2752         * linux-thread-db.c (find_new_threads_callback): Ignore thread if
2753         the kernel thread ID is -1.
2754
2755 2015-01-09  Pedro Alves  <palves@redhat.com>
2756
2757         * linux-nat.c (attach_proc_task_lwp_callback): New function.
2758         (linux_nat_attach): Use linux_proc_attach_tgid_threads.
2759         (wait_lwp, linux_nat_filter_event): If not set yet, set the lwp's
2760         ptrace option flags.
2761         * linux-nat.h (struct lwp_info) <must_set_ptrace_flags>: New
2762         field.
2763         * nat/linux-procfs.c: Include <dirent.h>.
2764         (linux_proc_get_int): New parameter "warn".  Handle it.
2765         (linux_proc_get_tgid): Adjust.
2766         (linux_proc_get_tracerpid): Rename to ...
2767         (linux_proc_get_tracerpid_nowarn): ... this.
2768         (linux_proc_pid_get_state): New function, factored out from
2769         (linux_proc_pid_has_state): ... this.  Add new parameter "warn"
2770         and handle it.
2771         (linux_proc_pid_is_gone): New function.
2772         (linux_proc_pid_is_stopped): Adjust.
2773         (linux_proc_pid_is_zombie_maybe_warn)
2774         (linux_proc_pid_is_zombie_nowarn): New functions.
2775         (linux_proc_pid_is_zombie): Use
2776         linux_proc_pid_is_zombie_maybe_warn.
2777         (linux_proc_attach_tgid_threads): New function.
2778         * nat/linux-procfs.h (linux_proc_get_tgid): Update comment.
2779         (linux_proc_get_tracerpid): Rename to ...
2780         (linux_proc_get_tracerpid_nowarn): ... this, and update comment.
2781         (linux_proc_pid_is_gone): New declaration.
2782         (linux_proc_pid_is_zombie): Update comment.
2783         (linux_proc_pid_is_zombie_nowarn): New declaration.
2784         (linux_proc_attach_lwp_func): New typedef.
2785         (linux_proc_attach_tgid_threads): New declaration.
2786         * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason): Adjust to
2787         use nowarn functions.
2788         (linux_ptrace_attach_fail_reason_string): Move here from
2789         gdbserver/linux-low.c and rename.
2790         (ptrace_supports_feature): If the current ptrace options are not
2791         known yet, check them now, instead of asserting.
2792         * nat/linux-ptrace.h (linux_ptrace_attach_fail_reason_string):
2793         Declare.
2794
2795 2015-01-09  Pedro Alves  <palves@redhat.com>
2796
2797         * linux-thread-db.c (thread_db_find_new_threads_silently)
2798         (try_thread_db_load_1, try_thread_db_load, thread_db_load_search)
2799         (find_new_threads_once): Print debug output on gdb_stdlog.
2800
2801 2015-01-09  Chen Gang  <gang.chen.5i5j@gmail.com>
2802             Pedro Alves  <palves@redhat.com>
2803
2804         * compile/compile.c: Include "gdb_wait.h".
2805         (do_rmdir): Check return value, and free 'zap'.
2806
2807 2015-01-08  Pedro Alves  <palves@redhat.com>
2808             Yao Qi  <yao@codesourcery.com>
2809
2810         * dwarf2loc.c (indirect_pieced_value): Don't call
2811         gdb_sign_extend.  Call extract_signed_integer instead.
2812         * utils.c (gdb_sign_extend): Remove.
2813         * utils.h (gdb_sign_extend): Remove declaration.
2814
2815 2015-01-07  Pierre Muller  <muller@sourceware.org>
2816
2817         PR symtab/17811
2818         * stabsread.c (define_symbol): Set language for C++ special symbols.
2819
2820 2015-01-07  Patrick Palka  <patrick@parcs.ath.cx>
2821
2822         * inflow.c (initial_gdb_ttystate): Tweak comment.
2823
2824 2015-01-07  Joel Brobecker  <brobecker@adacore.com>
2825
2826         * inflow.c (set_initial_gdb_ttystate): Add empty line after
2827         comment documenting function.
2828
2829 2015-01-07  Patrick Palka  <patrick@parcs.ath.cx>
2830
2831         * terminal.h (set_initial_gdb_ttystate): Declare.
2832         * inflow.c (initial_gdb_ttystate): New static variable.
2833         (set_initial_gdb_ttystate): New setter.
2834         (child_terminal_init_with_pgrp): Copy initial_gdb_ttystate
2835         instead of our current terminal state.
2836         * top.c (gdb_init): Call set_initial_gdb_ttystate.
2837
2838 2015-01-07  Joel Brobecker  <brobecker@adacore.com>
2839
2840         * guile/scm-type.c (tyscm_array_1): Add comment.
2841         * python/py-type.c (typy_array_1): Add comment.
2842
2843 2015-01-06  Joel Brobecker  <brobecker@adacore.com>
2844
2845         * guile/scm-type.c (tyscm_array_1): Do not raise out-of-range
2846         error if N2 is equal to N1 - 1.
2847
2848 2015-01-06  Joel Brobecker  <brobecker@adacore.com>
2849
2850         * python/py-type.c (typy_array_1): Do not raise negative-length
2851         exception if N2 is equal to N1 - 1.
2852
2853 2015-01-03  Doug Evans  <xdje42@gmail.com>
2854
2855         * c-exp.y: Whitespace cleanup.
2856         (classify_inner_name): Remove extra ;.
2857
2858 2015-01-02  Maciej W. Rozycki  <macro@codesourcery.com>
2859
2860         * mips-tdep.c (mips32_scan_prologue): Keep the extracted stack
2861         offset signed.
2862
2863 2015-01-02  Doug Evans  <dje@google.com>
2864
2865         * dwarf2read.c (setup_type_unit_groups): Remove outdated comment.
2866
2867 2015-01-02  Doug Evans  <dje@google.com>
2868
2869         * symtab.h (struct symbol): Fix typo in comment.
2870
2871 2015-01-01  Joel Brobecker  <brobecker@adacore.com>
2872
2873         Update year range in copyright notice of all files.
2874
2875 2015-01-01  Joel Brobecker  <brobecker@adacore.com>
2876
2877         * top.c (print_gdb_version): Update copyright year to 2015.
2878
2879 2015-01-01  Joel Brobecker  <brobecker@adacore.com>
2880
2881         * config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2014.
2882
2883 For older changes see ChangeLog-2014.
2884 \f
2885 Local Variables:
2886 mode: change-log
2887 left-margin: 8
2888 fill-column: 74
2889 version-control: never
2890 coding: utf-8
2891 End: