1 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
3 * rs6000-tdep.c (efpr_pseudo_register_read): Use correct offset
4 of the overlapped FP register within the VSX register on little-
6 (efpr_pseudo_register_write): Likewise.
8 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
10 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_val): Use correct
11 offset on little-endian when passing small structures.
13 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
15 * ppc-sysv-tdep.c (get_decimal_float_return_value): Update comment.
16 (struct ppc64_sysv_argpos): New data structure.
17 (ppc64_sysv_abi_push_float): Remove.
18 (ppc64_sysv_abi_push_val): New function.
19 (ppc64_sysv_abi_push_integer): Likewise.
20 (ppc64_sysv_abi_push_freg): Likewise.
21 (ppc64_sysv_abi_push_vreg): Likewise.
22 (ppc64_sysv_abi_push_param): Likewise.
23 (ppc64_sysv_abi_push_dummy_call): Refactor to use those new routines.
24 (ppc64_sysv_abi_return_value_base): New function.
25 (ppc64_sysv_abi_return_value): Refactor to use it.
27 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
29 * NEWS: Document new target powerpc64le-*-linux*.
31 2014-02-04 Mark Kettenis <kettenis@gnu.org>
33 * sparc64obsd-tdep.c (sparc64obsd_gregset): New variable.
34 (sparc64obsd_supply_gregset): Handle registers sets used in ELF
36 (sparc64obsd_init_abi): Adjust minimum size of the general purpose
37 register set used in ELF core dumps. Add floating-point register set.
39 2014-02-03 Kevin Buettner <kevinb@redhat.com>
41 * mn10300-tdep.c (mn10300_dwarf2_reg_to_regnum): Rewrite
42 dwarf2_to_gdb[] table using symbolic constants. Adjust
43 penultimate entry from number representing the PC register
44 to symbolic constant representing the MDR register. Add
45 constant for the PC register to the end of the table.
47 2014-02-03 Mark Kettenis <kettenis@gnu.org>
49 * bsd-kvm.c: Include <sys/param.h>
51 2014-02-03 Mark Kettenis <kettenis@gnu.org>
53 * sparc64nbsd-nat.c (sparc64nbsd_supply_fpregset): Fix prototype.
55 2014-01-31 Joel Brobecker <brobecker@adacore.com>
57 * ada-lang.h (clear_ada_sym_cache): Delete.
59 2014-01-30 Ulrich Weigand <uweigand@de.ibm.com>
61 * auxv.c (fprint_target_auxv): Handle AT_HWCAP2.
63 2014-01-29 Jose E. Marchesi <jose.marchesi@oracle.com>
65 * sparc64-linux-tdep.c (sparc64_linux_step_trap): Get PC from
66 the sigreturn register save area only if the syscall is
69 2014-01-29 Joel Brobecker <brobecker@adacore.com>
71 * valops.c (value_slice): Minor reformatting.
73 2014-01-28 Ulrich Weigand <uweigand@de.ibm.com>
75 * ppc64-tdep.c (ppc64_standard_linkage7): Fix typo.
77 2014-01-28 Joel Brobecker <brobecker@adacore.com>
79 * ada-lang.c (maint_set_ada_cmdlist, maint_show_ada_cmdlist):
81 (maint_set_ada_cmd, maint_show_ada_cmd): New functions.
82 (ada_ignore_descriptive_types_p): New static global.
83 (find_parallel_type_by_descriptive_type): Return immediately
84 if ada_ignore_descriptive_types_p is set.
85 (_initialize_ada_language): Register new commands "maintenance
86 set ada", "maintenance show ada", "maintenance set ada
87 ignore-descriptive-types" and "maintenance show ada
88 ignore-descriptive-types".
89 * NEWS: Add entry for new "maint ada set/show
90 ignore-descriptive-types" commands.
92 2014-01-27 Markus Metzger <markus.t.metzger@intel.com>
94 * record-btrace.c (record_btrace_close): Call btrace_teardown
97 2014-01-27 Joel Brobecker <brobecker@adacore.com>
99 * ada-lang.c: Remove "#ifdef UI_OUT" condition for including
102 2014-01-27 Joel Brobecker <brobecker@adacore.com>
104 * ada-typeprint (type_is_full_subrange_of_target_type):
106 (print_range): Add parameter bounds_prefered_p. If not set,
107 try printing range types using the name of their base type.
108 (print_range_type): Add parameter bounds_prefered_p.
109 Use it in call to print_range.
110 (print_array_type, ada_print_type): Update calls to print_range
111 and print_range_type.
113 2014-01-27 Joel Brobecker <brobecker@adacore.com>
115 * ada-typeprint.c (print_array_type, print_choices, print_range)
116 (print_range_bound, print_dynamic_range_bound, print_range_type):
119 2014-01-27 Joel Brobecker <brobecker@adacore.com>
121 * ada-typeprint.c (print_range): Add missing empty line
122 after local declaration.
124 2014-01-27 Joel Brobecker <brobecker@adacore.com>
126 * ada-valprint.c (print_optional_low_bound): Get index_type's
127 target type for as long as it is a TYPE_CODE_RANGE.
129 2014-01-27 Joel Brobecker <brobecker@adacore.com>
131 * procfs.c (procfs_make_note_section): Remove assertion and
134 2014-01-24 Yao Qi <yao@codesourcery.com>
136 * remote.c (remote_read_bytes): Change type of len to ULONGEST.
137 * corelow.c (get_core_siginfo): Likewise.
139 2014-01-24 Yao Qi <yao@codesourcery.com>
141 * remote.c (remote_write_bytes_aux): Change type of 'len' to
142 ULONGEST. Don't check 'len' is negative.
143 (remote_write_bytes): Change type of 'len' to ULONGEST.
145 2014-01-23 Tom Tromey <tromey@redhat.com>
148 * python/lib/gdb/FrameDecorator.py: (FrameVars.fetch_frame_args):
149 Handle exception from frame.block.
150 (FrameVars.fetch_frame_locals): Likewise.
152 2014-01-23 Tom Tromey <tromey@redhat.com>
155 * python/py-framefilter.c (py_print_frame): Don't call Py_DECREF
156 on a NULL pointer. Move "goto error" to correct place.
158 2014-01-23 Tom Tromey <tromey@redhat.com>
161 * python/py-framefilter.c (apply_frame_filter): Call
162 ensure_python_env after computing gdbarch.
164 2014-01-23 Yao Qi <yao@codesourcery.com>
166 * target.c (raw_memory_xfer_partial): Change argument type
167 from void * to gdb_byte *.
168 (memory_xfer_partial_1, memory_xfer_partial): Likewise.
170 2014-01-22 Doug Evans <dje@google.com>
172 New gdbserver option --debug-format=timestamp.
175 2014-01-22 Andreas Arnez <arnez@vnet.linux.ibm.com>
177 * syscalls/s390x-linux.xml: New file.
178 * syscalls/s390-linux.xml: New file.
179 * s390-linux-tdep.c (XML_SYSCALL_FILENAME_S390): New macro.
180 (XML_SYSCALL_FILENAME_S390X): Likewise.
181 (op_svc): New enum value for SVC opcode.
182 (s390_sigtramp_frame_sniffer): Replace literal by 'op_svc'.
183 (s390_linux_get_syscall_number): New function.
184 (s390_gdbarch_init): Register '*get_syscall_number' and the
185 syscall xml file name.
186 * data-directory/Makefile.in (SYSCALLS_FILES): Add
187 "s390-linux.xml" and "s390x-linux.xml".
188 * NEWS: Announce new feature.
190 2014-01-22 Baruch Siach <baruch@tkos.co.il>
192 * xtensa-tdep.h (xtensa_elf_greg_t): Change type to uint32_t.
194 2014-01-22 Pedro Alves <palves@redhat.com>
196 * xtensa-config.c: Include defs.h.
198 2014-01-22 Joel Brobecker <brobecker@adacore.com>
200 * common/common-utils.h: Add "ARI:" comment beside __func__
203 2014-01-22 Joel Brobecker <brobecker@adacore.com>
205 * common/common-utils.h (FUNCTION_NAME): Expand the macro's
208 2014-01-21 Roland McGrath <mcgrathr@google.com>
210 * configure.ac: Call AM_PROG_INSTALL_STRIP.
211 * configure: Regenerate.
212 * aclocal.m4: Regenerate.
213 * Makefile.in (install_sh, INSTALL_STRIP_PROGRAM, STRIP):
214 New substituted variables.
215 (install-strip): New target.
216 (INSTALL_SCRIPT): New substituted variable.
217 (FLAGS_TO_PASS): Add it.
218 (install-only): Use $(INSTALL_SCRIPT) rather than
219 $(INSTALL_PROGRAM) for gcore.
221 2014-01-20 Tom Tromey <tromey@redhat.com>
223 * cli/cli-decode.h (struct cmd_list_element): Move all bitfields
226 2014-01-20 Tom Tromey <tromey@redhat.com>
228 * cli/cli-decode.c (add_cmd, deprecate_cmd, add_alias_cmd)
229 (add_setshow_cmd_full, delete_cmd, lookup_cmd_1)
230 (deprecated_cmd_warning, complete_on_cmdlist): Update.
231 * cli/cli-decode.h (CMD_DEPRECATED, DEPRECATED_WARN_USER)
232 (MALLOCED_REPLACEMENT, DOC_ALLOCATED): Remove.
233 (struct cmd_list_element) <flags>: Remove.
234 <cmd_deprecated, deprecated_warn_user, malloced_replacement,
235 doc_allocated>: New fields.
236 <hook_in, allow_unknown, abbrev_flag, type, var_type>: Now
238 * maint.c (maintenance_do_deprecate): Update.
239 * top.c (execute_command): Update.
241 2014-01-20 Baruch Siach <baruch@tkos.co.il>
243 * xtensa-linux-nat.c: Include asm/ptrace.h.
245 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
247 * Makefile.in (SFILES): Add d-support.c.
248 (COMMON_OBS): Add d-support.o.
249 * d-lang.h (d_parse_symbol): Add comment, now defined in
251 * d-lang.c (parse_call_convention)
252 (parse_attributes, parse_function_types)
253 (parse_function_args, parse_type, parse_identifier)
254 (call_convention_p, d_parse_symbol): Move functions to ...
255 * d-support.c: ... New file.
257 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
259 * d-lang.h (d_parse_symbol): Add declaration.
260 * d-lang.c (extract_identifiers)
261 (extract_type_info): Remove functions.
262 (parse_call_convention, parse_attributes)
263 (parse_function_types, parse_function_args)
264 (parse_type, parse_identifier, call_convention_p)
265 (d_parse_symbol): New functions.
266 (d_demangle): Use d_parse_symbol to demangle D symbols.
268 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
270 * d-lang.h (struct builtin_d_type): New data type.
271 (builtin_d_type): Add declaration.
272 * d-lang.c (d_language_arch_info, build_d_types)
273 (builtin_d_type): New functions.
274 (enum d_primitive_types): New data type.
275 (d_language_defn): Change c_language_arch_info to
276 d_language_arch_info.
277 (d_type_data): New static variable.
278 (_initialize_d_language): Initialize d_type_data.
280 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
282 * d-lang.h (d_main_name): Add declaration.
283 * d-lang.c (d_main_name): New function.
284 * symtab.c (find_main_name): Add call to d_main_name.
286 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
288 * d-lang.c (d_language_defn): Change macro_expansion_c to
291 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
293 * MAINTAINERS: Add myself as a write-after-approval maintainer.
295 2014-01-17 Sergio Durigan Junior <sergiodj@redhat.com>
297 * breakpoint.c (insert_bp_location): Add "volatile" keyword to "struct
298 gdb_exception" declaration.
299 * remote.c (getpkt_or_notif_sane): Likewise.
301 2014-01-17 Doug Evans <dje@google.com>
303 * common/gdb_vecs.c (delim_string_to_char_ptr_vec_append): New
304 function, contents of dirnames_to_char_ptr_vec_append moved here.
305 (delim_string_to_char_ptr_vec): New function.
306 (dirnames_to_char_ptr_vec_append): Rewrite.
307 * common/gdb_vecs.h (delim_string_to_char_ptr_vec): Declare.
309 2014-01-17 Doug Evans <dje@google.com>
311 * common/common-utils.h (FUNCTION_NAME): Renamed from ASSERT_FUNCTION,
313 * common/gdb_assert.h (ASSERT_FUNCTION): ... from here.
314 #include "common-utils.h".
315 (gdb_assert, gdb_assert_fail, gdb_assert_not_reached): Update.
316 * common/vec.h (VEC_ASSERT_PASS): Update.
317 * darwin-nat.h: Replace #include of gdb_assert.h with common-utils.h.
318 (MACH_CHECK_ERROR): Update.
320 2014-01-17 Simon Marchi <simon.marchi@ericsson.com>
322 * gdbarch.sh (gdbarch_address_class_name_to_type_flags): Add
324 * gdbarch.h: Regenerate.
326 2014-01-16 Tom Tromey <tromey@redhat.com>
328 * value.c (struct value) <regnum>: Move earlier.
330 2014-01-16 Tom Tromey <tromey@redhat.com>
332 * remote.c (extended_remote_create_inferior): Rename from
333 extended_remote_create_inferior_1. Add "ops" argument. Remove
336 2014-01-16 Pedro Alves <palves@redhat.com>
338 * s390-linux-tdep.c (s390_frame_unwind_cache): Swallow
339 NOT_AVAILABLE_ERROR errors while parsing the prologue or reading
342 2014-01-16 Doug Evans <dje@google.com>
344 * dwarf2read.c (open_and_init_dwp_file): Fix typo in comment.
346 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
348 * btrace.h (btrace_thread_flag): New.
349 (struct btrace_thread_info) <flags>: New.
350 * record-btrace.c (record_btrace_resume_thread)
351 (record_btrace_find_thread_to_move, btrace_step_no_history)
352 (btrace_step_stopped, record_btrace_start_replaying)
353 (record_btrace_step_thread, record_btrace_decr_pc_after_break)
354 (record_btrace_find_resume_thread): New.
355 (record_btrace_resume, record_btrace_wait): Extend.
356 (record_btrace_can_execute_reverse): New.
357 (record_btrace_open): Fail in non-stop mode.
358 (record_btrace_set_replay): Split into this, ...
359 (record_btrace_stop_replaying): ... this, ...
360 (record_btrace_clear_histories): ... and this.
361 (init_record_btrace_ops): Init to_can_execute_reverse.
364 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
366 * target.h (struct target_ops) <to_decr_pc_after_break>: New.
367 (forward_target_decr_pc_after_break)
368 (target_decr_pc_after_break): New.
369 * target.c (forward_target_decr_pc_after_break)
370 (target_decr_pc_after_break): New.
371 * aix-thread.c (aix_thread_wait): Call target_decr_pc_after_break
372 instead of gdbarch_decr_pc_after_break.
373 * darwin-nat.c (cancel_breakpoint): Call target_decr_pc_after_break
374 instead of gdbarch_decr_pc_after_break.
375 * infrun.c (adjust_pc_after_break): Call target_decr_pc_after_break
376 instead of gdbarch_decr_pc_after_break.
377 * linux-nat.c (cancel_breakpoint): Call target_decr_pc_after_break
378 instead of gdbarch_decr_pc_after_break.
379 * linux-thread-db.c (check_event): Call target_decr_pc_after_break
380 instead of gdbarch_decr_pc_after_break.
381 * record-full.c (record_full_wait_1): Call target_decr_pc_after_break
382 instead of gdbarch_decr_pc_after_break.
384 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
386 * btrace.c: Include regcache.h.
387 (btrace_add_pc): New.
388 (btrace_enable): Call btrace_add_pc.
389 (btrace_is_empty): New.
390 * btrace.h (btrace_is_empty): New.
391 * record-btrace.c (require_btrace, record_btrace_info): Call
394 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
396 * common/linux-btrace.c (perf_event_read_bts, linux_read_btrace):
398 (linux_disable_btrace): Change return type.
399 * common/linux-btrace.h (linux_read_btrace): Change parameters
400 and return type to allow error reporting. Update users.
401 (linux_disable_btrace): Change return type. Update users.
402 * common/btrace-common.h (btrace_read_type) <BTRACE_READ_DELTA>:
405 (btrace_block) <begin>: Comment on BEGIN == 0.
406 * btrace.c (btrace_compute_ftrace): Start from the end of
408 (btrace_stitch_trace, btrace_clear_history): New.
409 (btrace_fetch): Read delta trace, return if replaying.
410 (btrace_clear): Move clear history code to btrace_clear_history.
411 (parse_xml_btrace): Throw an error if parsing failed.
412 * target.h (struct target_ops) <to_read_btrace>: Change parameters
413 and return type to allow error reporting.
414 (target_read_btrace): Change parameters and return type to allow
416 * target.c (target_read_btrace): Update.
417 * remote.c (remote_read_btrace): Support delta reads. Pass
421 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
423 * record.h (record_btrace_frame_unwind)
424 (record_btrace_tailcall_frame_unwind): New declarations.
425 * dwarf2-frame: Include record.h
426 (dwarf2_frame_cfa): Throw an error for btrace frames.
427 * record-btrace.c: Include hashtab.h.
428 (btrace_get_bfun_name): New.
429 (btrace_call_history): Call btrace_get_bfun_name.
430 (struct btrace_frame_cache): New.
432 (bfcache_hash, bfcache_eq, bfcache_new): New.
433 (btrace_get_frame_function): New.
434 (record_btrace_frame_unwind_stop_reason): Allow unwinding.
435 (record_btrace_frame_this_id): Compute own id.
436 (record_btrace_frame_prev_register): Provide PC, throw_error
437 for all other registers.
438 (record_btrace_frame_sniffer): Detect btrace frames.
439 (record_btrace_tailcall_frame_sniffer): New.
440 (record_btrace_frame_dealloc_cache): New.
441 (record_btrace_frame_unwind): Add new functions.
442 (record_btrace_tailcall_frame_unwind): New.
443 (_initialize_record_btrace): Allocate cache.
444 * btrace.c (btrace_clear): Call reinit_frame_cache.
447 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
449 * record-btrace.c (record_btrace_set_replay)
450 (record_btrace_goto_begin, record_btrace_goto_end)
451 (record_btrace_goto): New.
452 (init_record_btrace_ops): Initialize them.
455 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
457 * record-btrace.c (record_btrace_find_new_threads)
458 (record_btrace_thread_alive): New.
459 (init_record_btrace_ops): Initialize to_find_new_threads and
462 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
464 * record-btrace.c (record_btrace_resume): New.
465 (record_btrace_wait): New.
466 (init_record_btrace_ops): Initialize to_wait and to_resume.
468 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
470 * record-btrace.c (record_btrace_xfer_partial)
471 (record_btrace_insert_breakpoint, record_btrace_remove_breakpoint)
472 (record_btrace_allow_memory_access): New.
473 (init_record_btrace_ops): Initialize new methods.
474 * target.c (raw_memory_xfer_partial): Bail out if target reports
475 that this memory is not available.
477 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
479 * target.h (target_ops) <to_insert_breakpoint>
480 <to_remove_breakpoint>: Add target_ops parameter.
481 (forward_target_insert_breakpoint): New.
482 (forward_target_remove_breakpoint): New.
483 (memory_remove_breakpoint, memory_insert_breakpoint):
484 Add target_ops parameter.
485 * target.c (target_insert_breakpoint): Split into this and ...
486 (forward_target_insert_breakpoint): ... this.
487 (target_remove_breakpoint): Split into this and ...
488 (forward_target_remove_breakpoint): ... this.
489 (debug_to_insert_breakpoint): Add target_ops parameter.
490 Call forward_target_insert_breakpoint.
491 (debug_to_remove_breakpoint): Add target_ops parameter.
492 Call forward_target_remove_breakpoint.
493 (update_current_target): Do not inherit or default to_insert_breakpoint
494 and to_remove_breakpoint.
495 * corelow.c (ignore): Add target_ops parameter.
496 * exec.c (ignore): Add target_ops parameter.
497 * mem-break.c (memory_insert_breakpoint, memory_remove_breakpoint):
498 Add target_ops parameter.
499 * monitor.c (monitor_insert_breakpoint, monitor_remove_breakpoint):
500 Add target_ops parameter.
501 * nto-procfs.c (procfs_insert_breakpoint, procfs_remove_breakpoint):
502 Add target_ops parameter.
503 * record-full.c (record_full_beneath_to_insert_breakpoint)
504 (record_full_beneath_to_remove_breakpoint, tmp_to_insert_breakpoint)
505 (tmp_to_remove_breakpoint, record_full_insert_breakpoint)
506 (record_full_remove_breakpoint, record_full_core_insert_breakpoint)
507 (record_full_core_remove_breakpoint): Add target_ops parameter.
509 (record_full_beneath_to_insert_breakpoint_ops)
510 (record_full_beneath_to_remove_breakpoint_ops)
511 (tmp_to_insert_breakpoint_ops, tmp_to_remove_breakpoint_ops): New.
512 (record_full_open): Initialize tmp_to_insert_breakpoint_ops,
513 tmp_to_remove_breakpoint_ops,
514 record_full_beneath_to_insert_breakpoint_ops, and
515 record_full_beneath_to_remove_breakpoint_ops.
516 * remote-m32r-sdi.c (m32r_insert_breakpoint)
517 (m32r_remove_breakpoint): Add target_ops parameter.
518 * remote-mips.c (mips_insert_breakpoint, mips_remove_breakpoint):
519 Add target_ops parameter.
520 * remote.c (remote_insert_breakpoint, remote_remove_breakpoint):
521 Add target_ops parameter.
523 2014-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
524 Markus Metzger <markus.t.metzger@intel.com>
526 * record-btrace.c: Include frame-unwind.h.
527 (record_btrace_frame_unwind_stop_reason)
528 (record_btrace_frame_this_id, record_btrace_frame_prev_register)
529 (record_btrace_frame_sniffer, record_btrace_frame_unwind):
531 (init_record_btrace_ops): Install it.
533 2014-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
535 * frame.c (get_frame_unwind_stop_reason): Unconditionally call
538 2014-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
540 * dwarf2-frame.c (dwarf2_frame_cfa): Move UNWIND_UNAVAILABLE check
543 2014-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
545 * frame-unwind.c: Include target.h.
546 (frame_unwind_try_unwinder): New function with code from ...
547 (frame_unwind_find_by_frame): ... here. New variable
548 unwinder_from_target, call also target_get_unwinder)
549 (target_get_tailcall_unwinder, and frame_unwind_try_unwinder for it.
550 * target.c (target_get_unwinder, target_get_tailcall_unwinder): New.
551 * target.h (struct target_ops): New fields to_get_unwinder and
552 to_get_tailcall_unwinder.
553 (target_get_unwinder, target_get_tailcall_unwinder): New declarations.
555 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
557 * record-btrace.c (record_btrace_fetch_registers)
558 (record_btrace_store_registers)
559 (record_btrace_to_prepare_to_store): New.
560 (init_record_btrace_ops): Add the above.
562 2014-01-16 Tom Tromey <tromey@redhat.com>
564 * windows-nat.c (windows_prepare_to_store): Add 'self' argument.
565 * target.h (struct target_ops) <to_prepare_to_store>: Add
567 (target_prepare_to_store): Add argument.
568 * target.c (debug_to_prepare_to_store): Add argument.
569 (update_current_target): Update.
570 * remote.c (remote_prepare_to_store): Add 'self' argument.
571 * remote-sim.c (gdbsim_prepare_to_store): Add 'self' argument.
572 * remote-mips.c (mips_prepare_to_store): Add 'self' argument.
573 * remote-m32r-sdi.c (m32r_prepare_to_store): Add 'self' argument.
574 * record-full.c (record_full_core_prepare_to_store): Add 'self'
576 * ravenscar-thread.c (ravenscar_prepare_to_store): Add argument.
577 * nto-procfs.c (procfs_prepare_to_store): Add 'self' argument.
578 * monitor.c (monitor_prepare_to_store): Add 'self' argument.
579 * inf-child.c (inf_child_prepare_to_store): Add 'self' argument.
580 * go32-nat.c (go32_prepare_to_store): Add 'self' argument.
582 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
584 * btrace.h (replay) <replay>: New.
585 (btrace_is_replaying): New.
586 * btrace.c (btrace_clear): Free replay iterator.
587 (btrace_is_replaying): New.
588 * record-btrace.c (record_btrace_is_replaying): New.
589 (record_btrace_info): Print insn number if replaying.
590 (record_btrace_insn_history): Start at replay position.
591 (record_btrace_call_history): Start at replay position.
592 (init_record_btrace_ops): Init to_record_is_replaying.
594 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
596 * record-btrace.c (record_btrace_insn_history_range): Include
598 (record_btrace_insn_history_from): Adjust range.
599 (record_btrace_call_history_range): Include
601 (record_btrace_call_history_from): Adjust range.
602 * NEWS: Announce changes.
604 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
606 * record.h (enum record_print_flag)
607 <record_print_indent_calls>: New.
608 * record.c (get_call_history_modifiers): Recognize /c modifier.
609 (_initialize_record): Document /c modifier.
610 * record-btrace.c (btrace_call_history): Add btinfo parameter.
611 Reorder fields. Optionally indent the function name. Update
613 * NEWS: Announce changes.
615 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
617 * common/linux-btrace.c (linux_enable_btrace): Enlarge buffer.
619 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
621 * btrace.c (ftrace_new_function): Start counting at one.
622 * record-btrace.c (record_btrace_info): Adjust number of calls
626 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
628 * record-btrace.c (btrace_call_history_insn_range): Print
629 insn range as [begin, end].
631 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
633 * btrace.h (struct btrace_func_link): New.
634 (enum btrace_function_flag): New.
635 (struct btrace_inst): Rename to ...
636 (struct btrace_insn): ...this. Update all users.
637 (struct btrace_func) <ibegin, iend>: Remove.
638 (struct btrace_func_link): New.
639 (struct btrace_func): Rename to ...
640 (struct btrace_function): ...this. Update all users.
641 (struct btrace_function) <segment, flow, up, insn, insn_offset)
642 (number, level, flags>: New.
643 (struct btrace_insn_iterator): Rename to ...
644 (struct btrace_insn_history): ...this.
646 (struct btrace_insn_iterator, btrace_call_iterator): New.
647 (struct btrace_target_info) <btrace, itrace, ftrace>: Remove.
648 (struct btrace_target_info) <begin, end, level>
649 <insn_history, call_history>: New.
650 (btrace_insn_get, btrace_insn_number, btrace_insn_begin)
651 (btrace_insn_end, btrace_insn_prev, btrace_insn_next)
652 (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get)
653 (btrace_call_number, btrace_call_begin, btrace_call_end)
654 (btrace_call_prev, btrace_call_next, btrace_call_cmp)
655 (btrace_find_function_by_number, btrace_set_insn_history)
656 (btrace_set_call_history): New.
657 * btrace.c (btrace_init_insn_iterator)
658 (btrace_init_func_iterator, compute_itrace): Remove.
659 (ftrace_print_function_name, ftrace_print_filename)
660 (ftrace_skip_file): Change
662 (ftrace_init_func): Remove.
663 (ftrace_debug): Use new btrace_function fields.
664 (ftrace_function_switched): Also consider gaining and
665 losing symbol information).
666 (ftrace_print_insn_addr, ftrace_new_call, ftrace_new_return)
667 (ftrace_new_switch, ftrace_find_caller, ftrace_new_function)
668 (ftrace_update_caller, ftrace_fixup_caller, ftrace_new_tailcall):
670 (ftrace_new_function): Move. Remove debug print.
671 (ftrace_update_lines, ftrace_update_insns): New.
672 (ftrace_update_function): Check for call, ret, and jump.
673 (compute_ftrace): Renamed to ...
674 (btrace_compute_ftrace): ...this. Rewritten to compute call
676 (btrace_fetch, btrace_clear): Updated.
677 (btrace_insn_get, btrace_insn_number, btrace_insn_begin)
678 (btrace_insn_end, btrace_insn_prev, btrace_insn_next)
679 (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get)
680 (btrace_call_number, btrace_call_begin, btrace_call_end)
681 (btrace_call_prev, btrace_call_next, btrace_call_cmp)
682 (btrace_find_function_by_number, btrace_set_insn_history)
683 (btrace_set_call_history): New.
684 * record-btrace.c (require_btrace): Use new btrace thread
686 (record_btrace_info, btrace_insn_history)
687 (record_btrace_insn_history, record_btrace_insn_history_range):
688 Use new btrace thread info fields and new iterator.
689 (btrace_func_history_src_line): Rename to ...
690 (btrace_call_history_src_line): ...this. Use new btrace
692 (btrace_func_history): Rename to ...
693 (btrace_call_history): ...this. Use new btrace thread info
694 fields and new iterator.
695 (record_btrace_call_history, record_btrace_call_history_range):
696 Use new btrace thread info fields and new iterator.
698 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
700 * frame.h (frame_id_build_unavailable_stack_special): New.
701 * frame.c (frame_id_build_unavailable_stack_special): New.
703 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
705 * amd64-tdep.c (amd64_classify_insn_at, amd64_insn_is_call)
706 (amd64_insn_is_ret, amd64_insn_is_jump, amd64_jmp_p): New.
707 (amd64_init_abi): Add insn_is_call, insn_is_ret, and insn_is_jump
709 * i386-tdep.c (i386_insn_is_call, i386_insn_is_ret)
710 (i386_insn_is_jump, i386_jmp_p): New.
711 (i386_gdbarch_init): Add insn_is_call, insn_is_ret, and
712 insn_is_jump to gdbarch.
713 * gdbarch.sh (insn_is_call, insn_is_ret, insn_is_jump): New.
714 * gdbarch.h: Regenerated.
715 * gdbarch.c: Regenerated.
716 * arch-utils.h (default_insn_is_call, default_insn_is_ret)
717 (default_insn_is_jump): New.
718 * arch-utils.c (default_insn_is_call, default_insn_is_ret)
719 (default_insn_is_jump): New.
721 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
723 * common/btrace-common.h (btrace_read_type) <btrace_read_all>:
725 (btrace_read_type) <BTRACE_READ_ALL>: ... this. Update users.
726 (btrace_read_type) <btrace_read_new>: Change to ...
727 (btrace_read_type) <BTRACE_READ_NEW>: ... this. Update users.
729 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
731 * common/linux-btrace.c (linux_read_btrace): Free trace from
734 2014-01-15 Doug Evans <dje@google.com>
736 * dwarf2read.c (open_and_init_dwp_file): Use pulongest to print
739 2014-01-15 Tom Tromey <tromey@redhat.com>
741 * dbxread.c (process_one_symbol): Use set_objfile_main_name.
742 * dwarf2read.c (read_partial_die): Use set_objfile_main_name.
743 * objfiles.c (get_objfile_bfd_data): Initialize language_of_main.
744 (set_objfile_main_name): New function.
745 * objfiles.h (struct objfile_per_bfd_storage) <name_of_main,
746 language_of_main>: New fields.
747 (set_objfile_main_name): Declare.
748 * symtab.c (find_main_name): Loop over objfiles to find the main
750 (set_main_name): Now static.
751 (get_main_info): Add comment.
752 * symtab.h (set_main_name): Don't declare.
754 2014-01-15 Tom Tromey <tromey@redhat.com>
756 * symtab.c (main_progspace_key): New global.
757 (struct main_info): New.
758 (name_of_main, language_of_main): Remove.
759 (get_main_info, main_info_cleanup): New function.
760 (set_main_name, main_name, main_language): Use get_main_info.
761 (_initialize_symtab): Initialize main_progspace_key.
763 2014-01-15 Tom Tromey <tromey@redhat.com>
765 * dbxread.c (process_one_symbol): Update.
766 * dwarf2read.c (read_partial_die): Update.
767 * symfile.c (set_initial_language): Call main_language.
768 * symtab.c (language_of_main): Now static.
769 (set_main_name): Add 'lang' parameter.
770 (find_main_name): Update.
771 (main_language): New function.
772 (symtab_observer_executable_changed): Update.
773 * symtab.h (set_main_name): Update.
774 (language_of_main): Remove.
775 (main_language): Declare.
777 2014-01-15 Tom Tromey <tromey@redhat.com>
779 * symfile.c (init_entry_point_info): Use new "initialized" field.
781 * objfiles.h (struct entry_point) <initialized>: New field.
782 (struct objfile_per_bfd_storage) <ei>: New field, moved from...
783 (struct objfile) <ei>: ...here. Remove.
784 * objfiles.c (entry_point_address_query): Update.
786 2014-01-15 Tom Tromey <tromey@redhat.com>
788 * objfiles.c (entry_point_address_query): Relocate entry point
790 (objfile_relocate1): Do not relocate entry point address.
791 * objfiles.h (struct entry_info) <entry_point>: Update comment.
792 <the_bfd_section_index>: New field.
793 * symfile.c (init_entry_point_info): Find the entry point's
796 2014-01-15 Tom Tromey <tromey@redhat.com>
798 * solib-frv.c (enable_break): Use entry_point_address_query.
800 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
802 * NEWS: Add note on improved process record-replay on
805 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
807 * arm-tdep.c (enum arm_record_result): New enum.
808 (arm_record_unsupported_insn): New function.
809 (arm_record_coproc_data_proc): Removed.
810 (thumb2_record_ld_st_multiple): New function.
811 (thumb2_record_ld_st_dual_ex_tbb): New function.
812 (thumb2_record_data_proc_sreg_mimm): New function.
813 (thumb2_record_ps_dest_generic): New function.
814 (thumb2_record_branch_misc_cntrl): New function.
815 (thumb2_record_str_single_data): New function.
816 (thumb2_record_ld_mem_hints): New function.
817 (thumb2_record_ld_word): New function.
818 (thumb2_record_lmul_lmla_div): New function.
819 (thumb2_record_decode_insn_handler): New function.
820 (decode_insn): Add thumb32 instruction handlers.
822 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
824 * arm-linux-tdep.c: Include "record-full.h" and "linux-record.h".
825 (struct arm_linux_record_tdep): Declare.
826 (arm_canonicalize_syscall): New function.
827 (arm_all_but_pc_registers_record): New function.
828 (arm_linux_syscall_record): New function.
829 (arm_linux_init_abi): Add syscall recording constructs.
830 * arm-tdep.c (thumb_record_ldm_stm_swi): Update thumb syscall
831 decoding. (arm_record_coproc_data_proc): Update arm syscall
833 * arm-tdep.h (struct gdbarch_tdep) <arm_swi_record>: Remove.
834 <arm_syscall_record>: New field.
835 * configure.tgt (arm*-*-linux*): Add linux-record.o to
838 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
840 * arm-tdep.c (thumb_record_misc): Update to use sp as base
841 register for push instruction recording.
843 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
845 * arm-tdep.c (thumb_record_misc): Update to correct logical
846 error while recording ldm, ldmia and pop instructions.
848 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
850 * arm-tdep.c (struct arm_mem_r) <addr>: Change type to uint32_t.
852 2014-01-15 Pedro Alves <palves@redhat.com>
854 * go32-nat.c (go32_open, go32_close, go32_attach, go32_detach)
855 (go32_resume, go32_fetch_registers, store_register)
856 (go32_store_registers, go32_prepare_to_store)
857 (go32_xfer_memory, go32_files_info, go32_kill_inferior)
858 (go32_create_inferior, go32_can_run, go32_terminal_init)
859 (go32_terminal_inferior, go32_terminal_ours): Delete forward
862 2014-01-15 Tom Tromey <tromey@redhat.com>
864 * target.h (async_callback_ftype): New typedef.
865 (struct target_ops) <to_async>: Use it.
867 2014-01-15 Joel Brobecker <brobecker@adacore.com>
869 * python/py-value.c (get_field_type): Remove unnecessary curly
870 braces for single-statement if block.
872 2014-01-15 Joel Brobecker <brobecker@adacore.com>
874 * python/py-type.c (convert_field): Add missing empty line
877 2014-01-14 Doug Evans <dje@google.com>
879 * symfile.h (expand_symtabs_matching): Renamed from
880 expand_partial_symbol_names. Update prototype.
881 (map_symbol_filenames): Renamed from map_partial_symbol_filenames.
882 * symfile.c (expand_symtabs_matching): Renamed from
883 expand_partial_symbol_names. New args file_matcher, kind.
884 Rename arg fun to symbol_matcher.
885 (map_symbol_filenames): Renamed from map_partial_symbol_filenames.
886 * ada-lang.c (ada_complete_symbol_matcher): Renamed from
887 ada_expand_partial_symbol_name.
888 (ada_make_symbol_completion_list): Update to call
889 expand_symtabs_matching.
890 (ada_add_global_exceptions): Call expand_symtabs_matching.
891 * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_files): Update to
892 call map_symbol_filenames.
893 * symtab.c (sources_info): Update to call map_symbol_filenames.
894 (search_symbols): Call expand_symtabs_matching.
895 (symbol_completion_matcher): Renamed from expand_partial_symbol_name.
896 (default_make_symbol_completion_list_break_on): Update to call
897 expand_symtabs_matching.
898 (make_source_files_completion_list): Update to call
899 map_symbol_filenames.
901 2014-01-14 Doug Evans <dje@google.com>
903 * symfile.h (expand_symtabs_file_matcher_ftype): New typedef.
904 (expand_symtabs_symbol_matcher_ftype): New typedef.
905 (quick_symbol_functions.expand_symtabs_matching): Update to use.
906 expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
907 * symfile.c (expand_partial_symbol_names): Update to use
908 expand_symtabs_symbol_matcher_ftype.
909 * dwarf2read.c (dw2_expand_symtabs_matching): Update to use
910 expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
911 Arg name_matcher renamed to symbol_matcher.
912 * psymtab.c (recursively_search_psymtabs): Update to use
913 expand_symtabs_symbol_matcher_ftype. Arg name_matcher renamed to
915 (expand_symtabs_matching_via_partial): Update to use
916 expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
917 Arg name_matcher renamed to symbol_matcher.
919 2014-01-14 Doug Evans <dje@google.com>
921 * psymtab.c (expand_partial_symbol_names): Delete, moved to symfile.c.
922 (map_partial_symbol_filenames): Ditto.
923 * psymtab.h (expand_partial_symbol_names): Delete, moved to symfile.h.
924 (map_partial_symbol_filenames): Ditto.
925 * symfile.c (expand_partial_symbol_names): Moved here from psymtab.c.
926 (map_partial_symbol_filenames): Ditto.
927 * symfile.h (expand_partial_symbol_names): Moved here from psymtab.h.
928 (map_partial_symbol_filenames): Ditto.
929 * symtab.c: Delete #include "psymtab.h".
931 2014-01-14 Pedro Alves <palves@redhat.com>
932 Tom Tromey <tromey@redhat.com>
934 * infrun.c (use_displaced_stepping): Use find_record_target
935 instead of RECORD_IS_USED.
936 (adjust_pc_after_break): Use record_full_is_used instead of
938 * record-btrace.c (record_btrace_open): Call record_preopen
939 instead of checking RECORD_IS_USED.
940 * record-full.c (record_full_shortname)
941 (record_full_core_shortname): New globals.
942 (record_full_is_used): New function.
943 (find_full_open): Call record_preopen instead of checking
945 (init_record_full_ops): Set the target's shortname to
946 record_full_shortname.
947 (init_record_full_core_ops): Set the target's shortname to
948 record_full_core_shortname.
949 * record-full.h (record_full_is_used): Declare.
950 * record.c (find_record_target): Make extern.
951 (record_preopen): New function.
952 * record.h (RECORD_IS_USED): Delete macro.
953 (find_record_target, record_preopen): Declare functions.
955 2014-01-14 Yao Qi <yao@codesourcery.com>
957 * gdbarch.sh (core_xfer_shared_libraries): Change its argument
958 'len''s type to ULONGEST.
959 (core_xfer_shared_libraries_aix): Likewise.
960 * gdbarch.c, gdbarch.h: Regenerated.
961 * i386-cygwin-tdep.c (windows_core_xfer_shared_libraries):
962 Change type of 'len' to ULONGEST.
963 * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise.
964 (rs6000_aix_core_xfer_shared_libraries_aix): Likewise.
966 2014-01-14 Yao Qi <yao@codesourcery.com>
968 * common/linux-osdata.c (linux_xfer_osdata_processes): Change
969 type of 'len' to ULONGEST.
970 (linux_xfer_osdata_processgroups): Likewise.
971 (linux_xfer_osdata_threads): Likewise.
972 (linux_xfer_osdata_fds): Likewise.
973 (linux_xfer_osdata_isockets): Likewise.
974 (linux_xfer_osdata_shm): Likewise.
975 (linux_xfer_osdata_sem): Likewise.
976 (linux_xfer_osdata_msg): Likewise.
977 (linux_common_xfer_osdata): Likewise.
978 (struct osdata_type) <getter>: Likewise.
979 * common/linux-osdata.h (linux_common_xfer_osdata): Update
982 2014-01-14 Yao Qi <yao@codesourcery.com>
984 * target.h (target_xfer_partial_ftype): Update.
985 (struct target_ops) <to_xfer_partial>: Change 'len' type to
987 * aix-thread.c (aix_thread_xfer_partial): Change type of
988 argument 'len' to ULONGEST.
989 * auxv.c (procfs_xfer_auxv): Likewise.
990 (ld_so_xfer_auxv): Likewise.
991 (memory_xfer_auxv): Likewise.
992 * bfd-target.c (target_bfd_xfer_partial): Likewise.
993 * bsd-kvm.c (bsd_kvm_xfer_partial): Likewise.
994 * bsd-uthread.c (bsd_uthread_xfer_partial): Likewise.
995 * corelow.c (core_xfer_partial): Likewise.
996 * ctf.c (ctf_xfer_partial): Likewise.
997 * darwin-nat.c (darwin_read_write_inferior): Likewise. Use
999 (darwin_read_dyld_info): Likewise.
1000 (darwin_xfer_partial): Likewise.
1001 * exec.c (section_table_xfer_memory_partial): Likewise.
1002 (exec_xfer_partial): Likewise.
1003 * exec.h (section_table_xfer_memory_partial): Update
1005 * gnu-nat.c (gnu_xfer_memory): Likewise. Call pulongest
1006 instead of plongest.
1007 (gnu_xfer_partial): Likewise.
1008 * ia64-hpux-nat.c (ia64_hpux_xfer_memory): Likewise.
1009 (ia64_hpux_xfer_solib_got): Likewise.
1010 (ia64_hpux_xfer_partial): Likewise.
1011 * ia64-linux-nat.c (ia64_linux_xfer_partial):
1012 * inf-ptrace.c (inf_ptrace_xfer_partial):
1013 * inf-ttrace.c (inf_ttrace_xfer_partial):
1014 * linux-nat.c (linux_xfer_siginfo): Likewise.
1015 (linux_nat_xfer_partial): Likewise.
1016 (spu_enumerate_spu_ids, linux_proc_xfer_spu): Likewise.
1017 (linux_nat_xfer_osdata, linux_xfer_partial): Likewise.
1018 * monitor.c (monitor_xfer_memory): Likewise.
1019 (monitor_xfer_partial): Likewise.
1020 * procfs.c (procfs_xfer_partial): Likewise.
1021 * record-full.c (record_full_xfer_partial): Likewise.
1022 (record_full_core_xfer_partial): Likewise.
1023 * remote-sim.c (gdbsim_xfer_memory): Likewise. Call pulongest
1024 instead of plongest.
1025 (gdbsim_xfer_partial): Likewise.
1026 * remote.c (remote_xfer_partial): Likewise.
1027 * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise.
1028 * rs6000-aix-tdep.h (rs6000_aix_ld_info_to_xml): Update
1030 * rs6000-nat.c (rs6000_xfer_partial): Likewise.
1031 (rs6000_xfer_shared_libraries): Likewise.
1032 * sol-thread.c (sol_thread_xfer_partial): Likewise.
1033 * sparc-nat.c (sparc_xfer_wcookie): Likewise.
1034 (sparc_xfer_partial): Likewise.
1035 * spu-linux-nat.c (spu_proc_xfer_spu): Likewise.
1036 (spu_xfer_partial): Likewise.
1037 * spu-multiarch.c (spu_xfer_partial): Likewise.
1038 * target.c (target_read_live_memory): Likewise.
1039 (memory_xfer_live_readonly_partial): Likewise.
1040 (memory_xfer_partial, memory_xfer_partial_1): Likewise.
1041 (target_xfer_partial, default_xfer_partial): Likewise.
1042 (current_xfer_partial): Likewise.
1043 * tracepoint.c (tfile_xfer_partial): Likewise.
1044 * windows-nat.c (windows_xfer_memory): Likewise. Call
1045 pulongest instead of plongest.
1046 (windows_xfer_partial): Likewise.
1047 (windows_xfer_shared_libraries): Likewise.
1049 2014-01-14 Yao Qi <yao@codesourcery.com>
1051 * rs6000-nat.c (rs6000_xfer_shared_libraries): Use
1052 target_xfer_partial_ftype.
1054 2014-01-13 Siva Chandra Reddy <sivachandra@google.com>
1058 * valops.c (value_struct_elt_bitpos): New function
1059 * py-type.c (convert_field): Set 'name' attribute of a gdb.Field
1060 object to 'None' if the field name is an empty string ("").
1061 * python/py-value.c (valpy_getitem): Use 'bitpos' and 'type'
1062 attribute to look for a field when 'name' is 'None'.
1063 (get_field_type): New function
1065 2014-01-13 Doug Evans <dje@google.com>
1068 * dwarf2read.c (dwarf2_get_dwz_file): Call gdb_bfd_record_inclusion.
1069 (try_open_dwop_file): Ditto.
1070 * gdb_bfd.c: #include "vec.h".
1071 (bfdp): New typedef.
1072 (struct gdb_bfd_data): New member included_bfds.
1073 (gdb_bfd_unref): Unref all included bfds.
1074 (gdb_bfd_record_inclusion): New function.
1075 * gdb_bfd.h (gdb_bfd_record_inclusion): Declare.
1077 2014-01-13 Tom Tromey <tromey@redhat.com>
1079 * gdbcore.h (deprecated_core_resize_section_table): Remove.
1081 2014-01-13 Tom Tromey <tromey@redhat.com>
1083 * defs.h (use_windows): Remove.
1084 * gdb.c (main): Update.
1085 * main.c (captured_main, gdb_main): Update.
1086 * main.h (struct captured_main_args) <use_windows>: Remove.
1087 * top.c (use_windows): Remove.
1089 2014-01-13 Tom Tromey <tromey@redhat.com>
1091 * defs.h (deprecated_flush_hook): Remove.
1093 2014-01-13 Jan Kratochvil <jan.kratochvil@redhat.com>
1096 * linux-thread-db.c (try_thread_db_load): Add parameter
1097 check_auto_load_safe. Move here the file_is_auto_load_safe call.
1098 (try_thread_db_load_from_pdir_1): Move it there from here.
1099 (try_thread_db_load_from_sdir): Update caller.
1100 (try_thread_db_load_from_dir): Move it there from here.
1102 2014-01-13 Patrick Palka <patrick@parcs.ath.cx>
1104 * regformats/regdat.sh: Always rewrite the register file.
1106 2014-01-13 Pedro Alves <palves@redhat.com>
1108 * Makefile.in (CHECK_HEADERS): New variable.
1109 (check-headers:): New rule.
1111 2014-01-13 Tom Tromey <tromey@redhat.com>
1113 * cli/cli-setshow.c (do_set_command): Update.
1114 * defs.h (deprecated_set_hook): Remove.
1115 * top.c (deprecated_set_hook): Remove.
1117 2014-01-13 Pedro Alves <palves@redhat.com>
1119 * tracepoint.c (tfile_fetch_registers): Don't infer the PC from
1120 the tracepoint if the PC is a pseudo-register.
1122 2014-01-13 Tom Tromey <tromey@redhat.com>
1124 * defs.h (XCALLOC): Remove.
1125 * bcache.c (bcache_xmalloc): Use XCNEW, not XCALLOC.
1126 (print_bcache_statistics): Use XCNEWVEC, not XCALLOC.
1127 * dwarf2loc.c (allocate_piece_closure): Likewise.
1128 * elfread.c (elf_symfile_segments): Likewise.
1129 (elf_symfile_segments): Likewise.
1130 * gdbtypes.c (copy_type_recursive): Likewise.
1131 * i386-tdep.c (i386_gdbarch_init): Use XCNEW, not XCALLOC.
1132 * jit.c (jit_frame_sniffer): Use XCNEWVEC, not XCALLOC.
1133 * minsyms.c (prim_record_minimal_symbol_full): Use XCNEW, not
1135 * mt-tdep.c (mt_gdbarch_init): Likewise.
1136 * opencl-lang.c (allocate_lval_closure): Use XCNEWVEC, not
1138 * psymtab.c (psymbol_compare): Use XCNEW, not XCALLOC.
1139 * regcache.c (regcache_xmalloc_1): Use XCNEWVEC, not XCALLOC.
1140 * registry.c (registry_alloc_data): Likewise.
1141 * rs6000-tdep.c (rs6000_gdbarch_init): Use XCNEW, not XCALLOC.
1142 * s390-linux-tdep.c (s390_gdbarch_init): Likewise.
1143 * serial.c (serial_fdopen_ops): Likewise.
1144 * solib-aix.c (solib_aix_get_section_offsets): Use XCNEWVEC, not
1146 * spu-tdep.c (spu_gdbarch_init): Use XCNEW, not XCALLOC.
1147 * symfile.c (default_symfile_segments): Use XCNEW and XCNEWVEC,
1150 2014-01-13 Tom Tromey <tromey@redhat.com>
1152 * defs.h (XMALLOC): Remove.
1153 * avr-tdep.c (avr_gdbarch_init): Use XNEW, not XMALLOC.
1154 * bfin-tdep.c (bfin_gdbarch_init): Likewise.
1155 * cli-out.c (struct ui_out *): Likewise.
1156 * cli/cli-dump.c (add_dump_command): Likewise.
1157 (add_dump_command): Likewise.
1158 * complaints.c (get_complaints): Likewise.
1159 (find_complaint): Likewise.
1160 * dwarf2-frame.c (execute_cfa_program): Likewise.
1161 * dwarf2read.c (abbrev_table_read_table): Likewise.
1162 * gdbarch.sh: Likewise.
1163 * gdbarch.c: Rebuild.
1164 * inf-ttrace.c (inf_ttrace_add_page): Likewise.
1165 * interps.c (interp_new): Likewise.
1166 * lm32-tdep.c (lm32_gdbarch_init): Likewise.
1167 * m32r-tdep.c (m32r_gdbarch_init): Likewise.
1168 * mi/mi-console.c (mi_console_file_new): Likewise.
1169 * mi/mi-interp.c (mi_interpreter_init): Likewise.
1170 * mi/mi-out.c (mi_out_new): Likewise.
1171 * mi/mi-parse.c (mi_parse): Likewise.
1172 * microblaze-tdep.c (microblaze_gdbarch_init): Likewise.
1173 * moxie-tdep.c (moxie_gdbarch_init): Likewise.
1174 * observer.c (xalloc_observer_list_node): Likewise.
1175 * regcache.c (regcache_xmalloc_1): Likewise.
1176 * reggroups.c (reggroup_new): Likewise.
1177 (_initialize_reggroup): Likewise.
1178 * registry.c (register_data_with_cleanup): Likewise.
1179 * remote.c (remote_notif_stop_alloc_reply): Likewise.
1180 * ser-base.c (serial_ttystate): Likewise.
1181 * ser-mingw.c (make_pipe_state): Likewise.
1182 * ser-pipe.c (pipe_open): Likewise.
1183 * serial.c (serial_open): Likewise.
1184 * sh64-tdep.c (sh64_gdbarch_init): Likewise.
1185 * tui/tui-data.c (tui_alloc_generic_win_info): Likewise.
1186 (tui_alloc_win_info): Likewise.
1187 (tui_add_content_elements): Likewise.
1188 * tui/tui-file.c (tui_file_new): Likewise.
1189 * tui/tui-out.c (tui_out_new): Likewise.
1190 * ui-file.c (mem_file_new): Likewise.
1191 * ui-out.c (push_level): Likewise.
1192 (make_cleanup_ui_out_end): Likewise.
1193 (append_header_to_list): Likewise.
1194 (ui_out_new): Likewise.
1195 * user-regs.c (user_reg_add_builtin): Likewise.
1197 2014-01-13 Tom Tromey <tromey@redhat.com>
1199 * defs.h (XZALLOC): Remove.
1200 * ada-lang.c (get_ada_inferior_data): Use XCNEW, not XZALLOC.
1201 * ada-tasks.c (get_ada_tasks_pspace_data): Likewise.
1202 (get_ada_tasks_inferior_data): Likewise.
1203 * auto-load.c (get_auto_load_pspace_data): Likewise.
1204 * auxv.c (get_auxv_inferior_data): Likewise.
1205 * bfd-target.c (target_bfd_reopen): Likewise.
1206 * breakpoint.c (get_catch_syscall_inferior_data): Likewise.
1207 (deprecated_insert_raw_breakpoint): Likewise.
1208 * bsd-uthread.c (bsd_uthread_pid_to_str): Likewise.
1209 * corelow.c (core_open): Likewise.
1210 * darwin-nat.c (darwin_check_new_threads): Likewise.
1211 (darwin_attach_pid): Likewise.
1212 * dummy-frame.c (dummy_frame_push): Likewise.
1213 * dwarf2-frame.c (dwarf2_frame_cache): Likewise.
1214 * dwarf2loc.c (allocate_piece_closure): Likewise.
1215 * elfread.c (elf_symfile_segments): Likewise.
1216 * eval.c (ptrmath_type_p): Likewise.
1217 * exceptions.c (EXCEPTIONS_SIGJMP_BUF): Likewise.
1218 * gdbtypes.c (alloc_type_arch): Likewise.
1219 (alloc_type_instance): Likewise.
1220 * hppa-tdep.c (hppa_gdbarch_init): Likewise.
1221 * inf-child.c (inf_child_can_use_agent): Likewise.
1222 * inflow.c (get_inflow_inferior_data): Likewise.
1223 * infrun.c (save_infcall_suspend_state): Likewise.
1224 * jit.c (jit_reader_load): Likewise.
1225 (get_jit_objfile_data): Likewise.
1226 (get_jit_program_space_data): Likewise.
1227 (jit_object_open_impl): Likewise.
1228 (jit_symtab_open_impl): Likewise.
1229 (jit_block_open_impl): Likewise.
1230 (jit_frame_sniffer): Likewise.
1231 * linux-fork.c (add_fork): Likewise.
1232 * maint.c (make_command_stats_cleanup): Likewise.
1233 * objfiles.c (get_objfile_pspace_data): Likewise.
1234 * opencl-lang.c (struct lval_closure): Likewise.
1235 * osdata.c (osdata_start_osdata): Likewise.
1236 * progspace.c (new_address_space): Likewise.
1237 (add_program_space): Likewise.
1238 * remote-sim.c (get_sim_inferior_data): Likewise.
1239 * sh-tdep.c (sh_gdbarch_init): Likewise.
1240 * skip.c (Ignore): Likewise.
1241 (skip_delete_command): Likewise.
1242 * solib-aix.c (get_solib_aix_inferior_data): Likewise.
1243 (library_list_start_library): Likewise.
1244 (solib_aix_current_sos): Likewise.
1245 * solib-darwin.c (get_darwin_info): Likewise.
1246 (darwin_current_sos): Likewise.
1247 * solib-dsbt.c (get_dsbt_info): Likewise.
1248 * solib-ia64-hpux.c (new_so_list): Likewise.
1249 (ia64_hpux_get_solib_linkage_addr): Likewise.
1250 * solib-spu.c (append_ocl_sos): Likewise.
1251 (spu_current_sos): Likewise.
1252 * solib-svr4.c (get_svr4_info): Likewise.
1253 (svr4_keep_data_in_core): Likewise.
1254 (library_list_start_library): Likewise.
1255 (svr4_default_sos): Likewise.
1256 (svr4_read_so_list): Likewise.
1257 * solib-target.c (library_list_start_library): Likewise.
1258 (solib_target_current_sos): Likewise.
1259 * sparc-tdep.c (sparc32_gdbarch_init): Likewise.
1260 * symfile-debug.c (install_symfile_debug_logging): Likewise.
1261 * symfile.c (default_symfile_segments): Likewise.
1262 * target-descriptions.c (tdesc_data_init): Likewise.
1263 (tdesc_create_reg): Likewise.
1264 (struct tdesc_type *): Likewise.
1265 (tdesc_create_vector): Likewise.
1266 (tdesc_set_struct_size): Likewise.
1267 (struct tdesc_type *): Likewise.
1268 (tdesc_free_feature): Likewise.
1269 (tdesc_create_feature): Likewise.
1270 * windows-nat.c (windows_add_thread): Likewise.
1271 (windows_make_so): Likewise.
1272 * xml-support.c (gdb_xml_body_text): Likewise.
1273 (gdb_xml_create_parser_and_cleanup): Likewise.
1274 (xml_process_xincludes): Likewise.
1275 * xml-syscall.c (allocate_syscalls_info): Likewise.
1276 (syscall_create_syscall_desc): Likewise.
1278 2014-01-12 Sergio Durigan Junior <sergiodj@redhat.com>
1280 * i386-tdep.c (i386_stap_parse_special_token_triplet): New
1281 function, with code from i386_stap_parse_special_token.
1282 (i386_stap_parse_special_token_three_arg_disp): Likewise.
1283 (i386_stap_parse_special_token): Move code to the two functions
1286 2014-01-09 Pedro Alves <palves@redhat.com>
1287 Hui Zhu <hui@codesourcery.com>
1290 * breakpoint.c (insert_bp_location): Rename hw_bp_err_string to
1291 bp_err_string. Don't mark the location shlib_disabled if the
1292 error thrown wasn't a generic or memory error. Catch errors
1293 thrown while inserting breakpoints in overlayed code. Output
1294 error message of software breakpoints.
1295 * remote.c (remote_insert_breakpoint): If this breakpoint has
1296 target-side commands but this stub doesn't support Z0 packets,
1297 throw NOT_SUPPORTED_ERROR error.
1298 * exceptions.h (enum errors) <NOT_SUPPORTED_ERROR>: New error.
1299 * target.h (target_insert_breakpoint): Extend comment.
1300 (target_insert_hw_breakpoint): Add comment.
1302 2014-01-08 Pedro Alves <palves@redhat.com>
1304 * remote.c (remote_add_thread): Add threads silently if starting
1306 (remote_notice_new_inferior): If in all-stop, and starting up,
1307 don't call notice_new_inferior.
1308 (get_current_thread): New function, factored out from ...
1309 (add_current_inferior_and_thread): ... this. Adjust.
1310 (remote_start_remote) <all-stop>: Fetch the thread list. If we
1311 found any thread, then select the remote's current thread as GDB's
1314 2014-01-08 Joel Brobecker <brobecker@adacore.com>
1316 * NEWS: Create a new section for the next release branch.
1317 Rename the section of the current branch, now that it has
1320 2014-01-08 Joel Brobecker <brobecker@adacore.com>
1322 GDB 7.7 branch created (79301218fa0f074c5656db0ec8972a5ddcf91fb5):
1323 * version.in: Bump version to 7.7.50.DATE-cvs.
1325 2014-01-08 Yao Qi <yao@codesourcery.com>
1327 * spu-linux-nat.c (spu_symbol_file_add_from_memory): Change
1328 type of 'id' to gdb_byte. Cast 'id' to 'const char *'.
1329 (spu_xfer_partial): Cast 'buf' to 'const char *'.
1331 2014-01-08 Yao Qi <yao@codesourcery.com>
1333 * spu-linux-nat.c (spu_symbol_file_add_from_memory): Pass
1334 return value of bfd_get_filename to symbol_file_add_from_bfd.
1336 2014-01-08 Pierre Muller <muller@sourceware.org>
1339 * coff-pe-read.c (struct read_pe_section_data): Add index field.
1340 (add_pe_exported_sym): Use SECTION_DATA->INDEX for call
1341 to prim_record_mininal_symbol_and_info.
1342 (add_pe_forwarded_sym): Use known section number of forwarded symbol
1343 in call to prim_record_minimal_symbol_and_info.
1344 (read_pe_exported_syms): Set index field of section_data.
1346 2014-01-07 Andrew Pinski <apinski@cavium.com>
1348 * features/aarch64-core.xml (cpsr): Change to be 64bit.
1349 * features/aarch64.c: Regenerate.
1351 2014-01-07 Andreas Schwab <schwab@linux-m68k.org>
1353 * target.c (return_null): Define.
1354 (update_current_target): Use it instead of return_zero for
1355 functions that return a pointer.
1357 2014-01-07 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
1359 * source.c (add_path): Fix check for duplicated paths in the previously
1362 2014-01-07 Honggyu Kim <hong.gyu.kim@lge.com>
1364 * ada-lang.c: Remove duplicated include statements.
1365 * alphabsd-nat.c: Ditto.
1366 * amd64-darwin-tdep.c: Ditto.
1367 * amd64fbsd-nat.c: Ditto.
1368 * auto-load.c: Ditto.
1370 * breakpoint.c: Ditto.
1372 * fork-child.c: Ditto.
1373 * gdb_usleep.c: Ditto.
1374 * i386-darwin-tdep.c: Ditto.
1375 * i386fbsd-nat.c: Ditto.
1377 * inferior.c: Ditto.
1379 * linux-nat.c: Ditto.
1380 * linux-tdep.c: Ditto.
1381 * m68kbsd-nat.c: Ditto.
1382 * m68klinux-nat.c: Ditto.
1383 * microblaze-tdep.c: Ditto.
1384 * mips-linux-tdep.c: Ditto.
1385 * mn10300-tdep.c: Ditto.
1386 * nto-tdep.c: Ditto.
1387 * opencl-lang.c: Ditto.
1389 * printcmd.c: Ditto.
1390 * regcache.c: Ditto.
1391 * remote-m32r-sdi.c: Ditto.
1395 * tilegx-linux-nat.c: Ditto.
1396 * tilegx-tdep.c: Ditto.
1397 * tracepoint.c: Ditto.
1399 * vaxbsd-nat.c: Ditto.
1400 * windows-nat.c: Ditto.
1401 * xtensa-tdep.c: Ditto.
1403 2014-01-07 Yao Qi <yao@codesourcery.com>
1405 * spu-linux-nat.c (_initialize_spu_nat): Declare.
1407 2014-01-07 Yao Qi <yao@codesourcery.com>
1408 Joel Brobecker <brobecker@adacore.com>
1410 * aix-thread.c (pdc_read_regs): Cast parameter to uintptr_t.
1411 (pdc_write_regs): Likewise.
1412 (fetch_regs_kernel_thread): Likewise.
1413 (store_regs_kernel_thread): Likewise.
1415 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1417 * ada-varobj.c (ada_varobj_adjust_for_child_access): Convert
1418 tagged type objects to their actual type.
1420 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1422 * ada-valprint.c (print_field_values): Add "language" parameter.
1423 Update calls to print_field_values and print_variant_part.
1424 Pass new parameter "language" in call to val_print instead
1425 of "current_language". Replace call to ada_val_print by call
1427 (print_variant_part): Add "language" parameter.
1428 (ada_val_print_struct_union): Update call to print_field_values.
1430 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1432 * ada-valprint.c (ui_memcpy): Delete.
1433 (ada_print_floating): Update documentation. Add empty line
1434 between between function documentation and implementation.
1435 Delete variable "buffer". Use ui_file_xstrdup in place of
1436 ui_file_put. Minor adjustments following this change.
1438 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1440 * ada-valprint.c (ada_val_print_string): New function,
1441 extracted from ada_val_print_array.
1442 (ada_val_print_array): Replace extracted code by call
1443 to ada_val_print_string followed by a return. Move
1444 "else" branch to the function's top block.
1446 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1448 * ada-valprint.c (ada_val_print_array): Move implementation
1449 down. Rename parameter "offset" and "val" into "offset_aligned"
1450 and "original_value" respectively. Add parameter "offset".
1452 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1454 * ada-valprint.c (ada_val_print_ref): Rewrite by mostly
1455 re-organizing the code. Change the "???" message printed
1456 when target type is a TYPE_CODE_UNDEF into
1457 "<ref to undefined type>".
1459 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1461 * ada-valprint.c (print_record): Delete, implementation inlined...
1462 (ada_val_print_struct_union): ... here. Remove call to
1463 ada_check_typedef in inlined implementation.
1465 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1467 * ada-valprint.c (ada_val_print_gnat_array): New function,
1468 extracted from ada_val_print_1;
1469 (ada_val_print_ptr, ada_val_print_num, ada_val_print_enum)
1470 (ada_val_print_flt, ada_val_print_struct_union)
1471 (ada_val_print_ref): Likewise.
1472 (ada_val_print_1): Delete variables i and elttype.
1473 Replace extracted-out code by call to corresponding
1476 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1478 * ada-valprint.c (ada_val_print_1): Remove call to gdb_flush.
1480 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1482 * ada-valprint.c (ada_val_print_1): Replace calls to
1483 ada_val_print_1 by calls to val_print.
1485 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1487 * ada-valprint.c (ada_val_print_1): Add parameter "language".
1488 Update calls to self accordingly. Replace calls to c_val_print
1489 by calls to val_print.
1491 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1493 * ada-valprint.c (print_record): Delete declaration.
1494 (adjust_type_signedness, ada_val_print_1): Likewise.
1495 (ada_val_print): Move function implementation down.
1496 (print_variant_part, print_field_values, print_record):
1497 Move function implementation up.
1499 2014-01-07 Joel Brobecker <brobecker@adacore.com>
1501 * python/py-type.c (typy_get_name): New function.
1502 (type_object_getset): Add entry for attribute "name".
1503 * NEWS: Add entry mentioning this new attribute.
1505 2014-01-07 Yao Qi <yao@codesourcery.com>
1507 * gnu-nat.c (set_exceptions_cmd): Remove an empty body 'if'
1510 2014-01-07 Yao Qi <yao@codesourcery.com>
1512 * gnu-nat.c (info_port_rights): Add qualifier const to
1515 2014-01-07 Yao Qi <yao@codesourcery.com>
1517 * gnu-nat.c (trace_me): Use 'void' for empty argument list.
1519 2014-01-07 Yao Qi <yao@codesourcery.com>
1521 * gnu-nat.c (make_inf) Update declaration.
1522 (make_inf): Make it static.
1523 (inf_set_traced): Likewise.
1524 (inf_port_to_thread, inf_task_died_status): Likewise.
1526 2014-01-07 Yao Qi <yao@codesourcery.com>
1528 * gnu-nat.c (inf_tid_to_proc): Remove declaration.
1530 2014-01-07 Yao Qi <yao@codesourcery.com>
1532 * gnu-nat.c (_initialize_gnu_nat): Declare.
1534 2014-01-07 Yao Qi <yao@codesourcery.com>
1536 * gdbarch.sh (byte_order, byte_order_for_code): Change type to
1538 (struct gdbarch_info) <byte_order>: Change type to
1540 <byte_order_for_code>: Likewise.
1541 * gdbarch.c, gdbarch.h: Regenerated.
1543 2014-01-06 Sasha Smundak <asmundak@google.com>
1545 * jit.c: (jit_reader_load_command): Fix JIT reader path creation.
1547 2014-01-06 Tom Tromey <tromey@redhat.com>
1549 * doublest.c (convert_doublest_to_floatformat): Use const, not
1551 * somread.c (som_symtab_read): Likewise.
1553 2014-01-07 Hui Zhu <hui@codesourcery.com>
1555 * gdb_bfd.c (gdb_bfd_stash_filename): Removed.
1556 (gdb_bfd_open): Removed gdb_bfd_stash_filename.
1557 (gdb_bfd_fopen): Ditto.
1558 (gdb_bfd_openr): Ditto.
1559 (gdb_bfd_openw): Ditto.
1560 (gdb_bfd_openr_iovec): Ditto.
1561 (gdb_bfd_fdopenr): Ditto.
1562 * gdb_bfd.h (gdb_bfd_stash_filename): Removed.
1563 * solib-aix.c (solib_aix_bfd_open): Alloc object_bfd->filename
1565 * solib-darwin.c (darwin_bfd_open): Alloc res->filename
1567 * symfile-mem.c (symbol_file_add_from_memory): Removed
1568 gdb_bfd_stash_filename.
1570 2014-01-03 Doug Evans <dje@google.com>
1572 * nat/linux-waitpid.c (linux_debug): Remove extraneous \n from
1575 2014-01-01 Joel Brobecker <brobecker@adacore.com>
1577 Update year range in copyright notice of all files.
1579 2014-01-01 Joel Brobecker <brobecker@adacore.com>
1581 * top.c (print_gdb_version): Set copyright year to 2014.
1583 2014-01-01 Joel Brobecker <brobecker@adacore.com>
1585 * config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2013.
1587 For older changes see ChangeLog-2013.
1593 version-control: never