1 2011-01-25 Pedro Alves <pedro@codesourcery.com>
3 * m2-valprint.c (print_unbounded_array): Pass
4 value_contents_for_printing rather than value_contents, to
5 m2_print_array_contents. Also pass in the value.
7 2011-01-25 Jan Kratochvil <jan.kratochvil@redhat.com>
9 * dwarf2read.c (dwarf2_read_index, write_psymtabs_to_index)
10 (save_gdb_index_command): Switch to .gdb_index version 4.
12 2011-01-25 Pedro Alves <pedro@codesourcery.com>
14 * mi/mi-main.c (get_register): Use get_frame_register_value rather
15 than frame_register, and always pass a valid value to val_print.
17 2011-01-25 Pedro Alves <pedro@codesourcery.com>
19 Centralize printing "<optimized out>".
21 * valprint.h (val_print_optimized_out): Declare.
22 * cp-valprint.c (cp_print_value_fields): Use
23 val_print_optimized_out.
24 * jv-valprint.c (java_print_value_fields): Ditto.
25 * p-valprint.c (pascal_object_print_value_fields): Ditto.
26 * printcmd.c (print_formatted): Ditto.
27 * valprint.c (valprint_check_validity): Ditto.
28 (value_check_printable): Ditto.
29 (val_print_optimized_out): New.
31 2011-01-25 Pedro Alves <pedro@codesourcery.com>
33 * infcmd.c (default_print_registers_info): Allocate values so to
34 never pass a NULL value to val_print.
36 2011-01-25 Pedro Alves <pedro@codesourcery.com>
38 * cp-valprint.c (cp_print_value): Treat the 'skip' local as
39 boolean. Make sure to always pass a value that matches the
40 contents buffer to callees. Preserve `address' for following
42 * value.c (value_contents_for_printing_const): New.
43 (value_address): Constify value argument.
44 * value.h (value_contents_for_printing_const): Declare.
45 (value_address): Constify value argument.
47 2011-01-25 Pedro Alves <pedro@codesourcery.com>
49 * regcache.c (struct regcache_descr): Rename
50 sizeof_raw_register_valid_p field to sizeof_raw_register_status,
51 and sizeof_cooked_register_valid_p to
52 sizeof_cooked_register_status.
53 (init_regcache_descr): Adjust.
54 (struct regcache): Rename register_valid_p field to
56 (regcache_xmalloc_1, regcache_xfree, regcache_save)
57 (do_cooked_read): Adjust.
58 (regcache_valid_p): Rename to ...
59 (regcache_register_status): ... this. Adjust.
60 (regcache_invalidate): Adjust.
61 (regcache_raw_read, regcache_cooked_read, regcache_raw_write):
63 (regcache_raw_supply): Adjust. If buf i NULL, mark the register
64 as unavailable, not valid.
65 (regcache_dump): Adjust.
66 * regcache.h (enum register_status): New.
67 (regcache_register_status): Declare.
68 (regcache_invalidate): Delete declaration.
69 * corelow.c (get_core_registers): Adjust.
70 * tracepoint.c (tfile_fetch_registers): Adjust.
71 * trad-frame.c (REG_VALUE): Rename to ...
72 (TF_REG_VALUE): ... this.
73 (REG_UNKNOWN): Rename to ...
74 (TF_REG_UNKNOWN): ... this.
75 (trad_frame_set_value, trad_frame_set_unknown): Adjust.
76 * mi/mi-main.c (register_changed_p): Adjust.
78 2011-01-25 Pedro Alves <pedro@codesourcery.com>
80 * regcache.c (struct regcache_descr): Remove outdated comment.
81 (init_regcache_descr): Remove sizeof_raw_register_valid_p
83 (regcache_xmalloc): Rename to ...
84 (regcache_xmalloc_1): ... this. Add `readonly_p' parameter.
85 Allocate the regcache type accordingly.
86 (regcache_xmalloc): New as wrapper around regcache_xmalloc_1.
87 (regcache_xfree): Asser the source is also readonly. Copy sizeof
88 cooked registers, not raw.
89 (regcache_dup_no_passthrough): Delete.
90 (get_thread_arch_regcache): Use regcache_xmalloc_1.
91 * h8300-tdep.c (h8300_push_dummy_call): Tweak comment to not
92 mention obsolete write_register_bytes.
93 * regcache.h (regcache_dup_no_passthrough): Delete declaration.
95 2011-01-25 Pedro Alves <pedro@codesourcery.com>
97 Stop remote_read_bytes from handling partial reads itself.
99 * remote-fileio.c: Include target.h.
100 (remote_fileio_write_bytes): Delete.
101 (remote_fileio_func_open, remote_fileio_func_write)
102 (remote_fileio_func_rename, remote_fileio_func_unlink): Use
104 (remote_fileio_func_stat): Use target_read_memory and
106 (remote_fileio_func_gettimeofday): Use target_write_memory.
107 (remote_fileio_func_system): Use target_read_memory.
108 * remote.c (remote_write_bytes): Make it static.
109 (remote_read_bytes): Don't handle partial reads here.
110 * remote.h (remote_read_bytes): Delete declaration.
112 2011-01-25 Pedro Alves <pedro@codesourcery.com>
114 Simplify XML parsing a bit.
116 * xml-support.h (gdb_xml_parse_quick): Declare.
117 * xml-support.c (gdb_xml_create_parser_and_cleanup_1): Renamed
118 from gdb_xml_create_parser_and_cleanup, and added `old_chain'
120 (gdb_xml_create_parser_and_cleanup): Reimplement on top of
121 gdb_xml_create_parser_and_cleanup_1.
122 (gdb_xml_parse_quick): New.
123 * memory-map.c (parse_memory_map): Use gdb_xml_parse_quick.
124 * osdata.c (osdata_parse): Ditto.
125 * remote.c (remote_threads_info): Ditto.
126 * solib-target.c (solib_target_parse_libraries): Ditto.
127 * xml-syscall.c (syscall_parse_xml): Ditto.
128 * xml-tdesc.c (tdesc_parse_xml): Ditto.
130 2011-01-24 Kevin Buettner <kevinb@redhat.com>
132 * configure.tgt (mips*-*-elf): New; just like mips*-*-*, but
133 with remote-mips.o added to gdb_target_obs.
134 * Makefile.in (ALL_TARGET_OBS): Add remote-mips.o.
136 2011-01-24 Pedro Alves <pedro@codesourcery.com>
138 * ada-valprint.c (val_print_packed_array_elements): Pass the
139 correct struct value to val_print.
140 (ada_val_print_1): Ditto.
142 2011-01-24 Pedro Alves <pedro@codesourcery.com>
144 Don't lose embedded_offset in printing routines throughout.
146 * valprint.h (val_print_array_elements): Change prototype.
147 * valprint.c (val_print_array_elements): Add `embedded_offset'
148 parameter, and adjust to pass it down to val_print, while passing
149 `valaddr' or `address' unmodified. Take embedded_offset into
150 account when checking repetitions.
151 * c-valprint.c (c_val_print): Pass embedded_offset to
152 val_print_array_elements instead of adjusting `valaddr' and
154 * m2-valprint.c (m2_print_array_contents, m2_val_print): Pass
155 embedded_offset to val_print_array_elements instead of adjusting
157 * p-lang.h (pascal_object_print_value_fields): Adjust prototype.
158 * p-valprint.c (pascal_val_print): Pass embedded_offset to
159 val_print_array_elements and pascal_object_print_value_fields
160 instead of adjusting `valaddr'.
161 (pascal_object_print_value_fields): Add `offset' parameter, and
163 (pascal_object_print_value): Add `offset' parameter, and adjust to
165 (pascal_object_print_static_field): Use
166 value_contents_for_printing/value_embedded_offset, rather than
168 * ada-valprint.c (val_print_packed_array_elements): Add `offset'
169 parameter, and adjust to use it. Use
170 value_contents_for_printing/value_embedded_offset, rather than
172 (ada_val_print): Rename `valaddr0' parameter to `valaddr'.
173 (ada_val_print_array): Add `offset' parameter, and adjust to use
175 (ada_val_print_1): Rename `valaddr0' parameter to `valaddr', and
176 `embedded_offset' to `offset'. Don't re-adjust `valaddr'.
177 Instead work with offsets. Use
178 value_contents_for_printing/value_embedded_offset, rather than
179 value_contents. Change `defer_val_int' local type to CORE_ADDR,
180 and use value_from_pointer to extract a target pointer, rather
181 than value_from_longest.
182 (print_variant_part): Add `offset' parameter. Replace
183 `outer_valaddr' parameter by a new `outer_offset' parameter.
184 Don't re-adjust `valaddr'. Instead pass down adjusted offsets.
185 (ada_value_print): Use
186 value_contents_for_printing/value_embedded_offset, rather than
188 (print_record): Add `offset' parameter, and adjust to pass it
190 (print_field_values): Add `offset' parameter. Replace
191 `outer_valaddr' parameter by a new `outer_offset' parameter.
192 Don't re-adjust `valaddr'. Instead pass down adjusted offsets.
193 Use value_contents_for_printing/value_embedded_offset, rather than
195 * d-valprint.c (dynamic_array_type): Use
196 value_contents_for_printing/value_embedded_offset, rather than
198 * jv-valprint.c (java_print_value_fields): Add `offset' parameter.
199 Don't re-adjust `valaddr'. Instead pass down adjusted offsets.
200 (java_print_value_fields): Take `offset' into account. Don't
201 re-adjust `valaddr'. Instead pass down adjusted offsets.
202 (java_val_print): Take `embedded_offset' into account. Pass it to
203 java_print_value_fields.
204 * f-valprint.c (f77_print_array_1): Add `embedded_offset'
205 parameter. Don't re-adjust `valaddr' or `address'. Instead pass
206 down adjusted offsets.
207 (f77_print_array): Add `embedded_offset' parameter. Pass it down.
208 (f_val_print): Take `embedded_offset' into account.
210 2011-01-21 Joel Brobecker <brobecker@adacore.com>
212 * inflow.c: Include "gdbcmd.h".
213 (interactive_mode): New static global, moved here from top.c.
214 (show_interactive_mode): New function, moved here from top.c.
215 use gdb_has_a_terminal instead of input_from_terminal_p to
216 determine the current mode.
217 (gdb_has_a_terminal): Add handling of the "iteractive-mode"
219 (_initialize_inflow): Add the "set/show interactive-mode"
220 commands. Moved here from top.c, after having adjusted slightly
222 * top.c (interactive_mode, show_interactive_mode): Delete, moved
224 (input_from_terminal_p): Remove handling of "interactive-mode"
225 setting, moved to infow.c.
226 (init_main): Remove creation of the "set/show interactive-mode"
227 commands, moved to inflow.c.
229 2011-01-19 Joel Brobecker <brobecker@adacore.com>
231 * NEWS: Add entry for native ia64-hpux support.
233 2011-01-19 Tom Tromey <tromey@redhat.com>
236 * thread.c (free_thread): Free 'name'.
237 (print_thread_info): Emit thread name. Change CLI output.
238 (thread_name_command): New function.
239 (do_captured_thread_select): Emit newline.
240 (_initialize_thread): Register 'thread name' command.
241 * target.h (struct target_ops) <to_thread_name>: New field.
242 (target_thread_name): New macro.
243 * target.c (update_current_target): Handle to_thread_name.
244 * python/py-infthread.c (thpy_get_name): New function.
245 (thpy_set_name): Likewise.
246 (thread_object_getset): Add "name".
247 * linux-nat.c (linux_nat_thread_name): New function.
248 (linux_nat_add_target): Set to_thread_name.
249 * gdbthread.h (struct thread_info) <name>: New field.
251 2011-01-18 Joel Brobecker <brobecker@adacore.com>
253 * ada-valprint.c (ada_print_scalar): Remove unsigned char downcast.
254 (ada_val_print_1): Likewise.
256 2011-01-18 Joel Brobecker <brobecker@adacore.com>
258 * rs6000-tdep.c (rs6000_skip_prologue): Make sure that the prologue
259 upper limit address is not greater than the function end address
260 when the upper limit could not be computed using the debugging
263 2011-01-17 Tom Tromey <tromey@redhat.com>
265 * cli/cli-cmds.c (apropos_command): Free the compiled regex. Use
267 * utils.c: Include gdb_regex.h.
268 (do_regfree_cleanup): New function.
269 (make_regfree_cleanup): Likewise.
270 (get_regcomp_error): Likewise.
271 * gdb_regex.h (make_regfree_cleanup, get_regcomp_error): Declare.
273 2011-01-17 Tom Tromey <tromey@redhat.com>
275 * cli/cli-cmds.c (apropos_command): Fix formatting. Don't call
278 2011-01-17 Pierre Muller <muller@ics.u-strasbg.fr>
280 * p-exp.y (intvar): New static variable, used to set CURRENT_TYPE
281 for internal variables.
282 (last_was_structop): New static variable.
283 (COMPLETE): New token.
284 (field_exp): New rule to group all '.' suffix handling.
285 Add mark_struct_expression calls when approriate to be able
286 to correctly find fields for completion.
287 (yylex): Adapt to handle field completion and set INTVAR when
290 2011-01-14 Yao Qi <yao@codesourcery.com>
292 * arm-tdep.c (arm_register_reggroup_p): FPS register is in
293 save_reggroup, restore_reggroup and all_reggroup.
295 2011-01-14 Joel Brobecker <brobecker@adacore.com>
297 * ada-valprint. (ada_printchar): Use the correct type length
298 in call to ada_emit_char.
299 * c-valprint.c (c_val_print): Remove cast in call to LA_PRINT_CHAR.
301 2011-01-14 Pierre Muller <muller@ics.u-strasbg.fr>
303 * solib-som.h (hpux_major_release): Declare variable here.
304 * solib-som.c: Remove <sys/utsname.h> header.
305 (DEFAULT_HPUX_MAJOR_RELEASE): New macro.
306 (hpux_major_release): Make global, change default value to
307 DEFAULT_HPUX_MAJOR_RELEASE.
308 (get_hpux_major_release): Simply return HPUX_MAJOR_RELEASE.
309 * hppa-hpux-nat.c: Add <sys/utsname.h> include.
310 Add "solib-som.h" header.
311 (set_hpux_major_release): New function.
312 (_initialize_hppa_hpux_nat): Call set_hpux_major_release.
314 2011-01-14 Mike Frysinger <vapier@gentoo.org>
316 * configure.tgt (*-*-uclinux*): Match more Linux os targets
318 2011-01-14 Joel Brobecker <brobecker@adacore.com>
320 * ia64-hpux-nat.c (ia64_hpux_fetch_register): Remove trailing
321 new-line at end of warning message.
322 (ia64_hpux_store_register): Remove trailing new-line at end of
324 * ia64-hpux-tdep.c: Rephrase comment.
325 * solib-ia64-hpux.c (struct dld_info): Change type of field
326 dld_flags from "long long" to ULONGEST.
328 2011-01-14 Pedro Alves <pedro@codesourcery.com>
330 * target.h (deprecated_child_ops): Delete declaration.
331 * target.c (deprecated_child_ops): Delete definition.
333 2011-01-14 Pedro Alves <pedro@codesourcery.com>
335 * Makefile.in (hpux-thread.o): Delete rule.
336 * configure.ac: Don't check for HPUX DCE threads support.
337 * configure, config.in: Regenerate.
338 * hppa-hpux-nat.c (child_suppress_run): Delete.
339 (hppa_hpux_child_can_run): Delete.
340 (_initialize_hppa_hpux_nat): Don't override to_can_run.
341 * hpux-thread.c: Delete.
343 2011-01-13 Joel Brobecker <brobecker@adacore.com>
345 * hpux-thread.c (hpux_pid_to_str): Delete.
347 2011-01-13 Joel Brobecker <brobecker@adacore.com>
349 * ada-valprint.c (ada_emit_char): Remove strange code.
350 Check that c is <= UCHAR_MAX before passing it to isascii.
351 (char_at): Do not assume that TYPE_LEN is either 1 or 2.
353 2011-01-13 Joel Brobecker <brobecker@adacore.com>
355 * top.c (input_from_terminal_p): Restrict the use of interactive_mode
356 to the case where instream is stdin.
358 2011-01-13 Joel Brobecker <brobecker@adacore.com>
360 * ia64-tdep.h (struct regcache): Forward declare.
361 (struct ia64_infcall_ops): New struct type.
362 (struct gdbarch_tdep): New fields "find_global_pointer_from_solib"
364 * ia64-tdep.c (ia64_find_global_pointer_from_dynamic_section):
365 Renames ia64_find_global_pointer.
366 (ia64_find_global_pointer, ia64_allocate_new_rse_frame)
367 (ia64_store_argument_in_slot, ia64_set_function_addr: New function.
368 (ia64_push_dummy_call): Adjust to use the new tdep ia64_infocall_ops
370 (ia64_infcall_ops): New static global constant.
371 (ia64_gdbarch_init): Set tdep->infcall_ops.
372 * ia64-hpux-nat.c (ia64_hpux_xfer_solib_got): New function.
373 (ia64_hpux_xfer_partial): Add TARGET_OBJECT_HPUX_SOLIB_GOT handing.
374 * ia64-hpux-tdep.c: Include "regcache.h", "gdbcore.h" and "inferior.h".
375 (ia64_hpux_dummy_code): New static global constant.
376 (ia64_hpux_push_dummy_code, ia64_hpux_allocate_new_rse_frame)
377 (ia64_hpux_store_argument_in_slot, ia64_hpux_set_function_addr)
378 (ia64_hpux_dummy_id, ia64_hpux_find_global_pointer_from_solib):
380 (ia64_hpux_infcall_ops): New static global constant.
381 (ia64_hpux_init_abi): Install gdbarch and tdep methods needed
382 for inferior function calls to work properly on ia64-hpux.
384 2011-01-13 Joel Brobecker <brobecker@adacore.com>
386 * target.h (enum target_object): Add TARGET_OBJECT_HPUX_UREGS.
387 * ia64-tdep.h (struct frame_info): forward declaration.
388 (struct gdbarch_tdep): Add field size_of_register_frame.
389 * ia64-tdep.c (ia64_access_reg): Use tdep->size_of_register_frame
390 to determine the size of the register frame.
391 (ia64_size_of_register_frame): New function.
392 (ia64_gdbarch_init): Set tdep->size_of_register_frame.
393 * ia64-hpux-tdep.c: Include "target.h" and "frame.h".
394 (IA64_HPUX_UREG_REASON): New macro.
395 (ia64_hpux_stopped_in_syscall, ia64_hpux_size_of_register_frame):
397 (ia64_hpux_init_abi): Set tdep->size_of_register_frame.
398 * ia64-hpux-nat.c (ia64_hpux_xfer_uregs): New function.
399 (ia64_hpux_xfer_partial): Add handling of TARGET_OBJECT_HPUX_UREGS
402 2011-01-13 Joel Brobecker <brobecker@adacore.com>
404 Add support for ia64-hpux.
405 * config/ia64/hpux.mh, ia64-hpux-nat.c, ia64-hpux-tdep.c,
406 ia64-hpux-tdep.h, solib-ia64-hpux.c, solib-ia64-hpux.h: New files.
408 * configure.host: Add handling for ia64-hpux hosts. Add associated
410 * configure.tgt: Add handling for ia64-hpux targets.
411 * Makefile.in (ALL_64_TARGET_OBS): Add ia64-hpux-tdep.o.
412 (HFILES_NO_SRCDIR): Add ia64-hpux-tdep.h.
413 (ALLDEPFILES): Add ia64-hpux-nat.c ia64-hpux-tdep.c.
415 2011-01-13 Joel Brobecker <brobecker@adacore.com>
417 [ttrace] Compute thread list immediately after attach.
418 * inf_ttrace_attach (inf_ttrace_create_threads_after_attach):
420 (inf_ttrace_attach): Use it.
422 2011-01-13 Joel Brobecker <brobecker@adacore.com>
424 * libunwind-frame.c (libunwind_frame_cache): Do not return NULL
425 if we could not determine the frame's function address. Instead,
426 use the frame's PC, and then continue.
428 2011-01-13 Joel Brobecker <brobecker@adacore.com>
430 * libunwind-frame.c (__LITTLE_ENDIAN, __BIG_ENDIAN): Define if
433 2011-01-13 Joel Brobecker <brobecker@adacore.com>
435 * ia64-tdep.c (ia64_struct_type_p): New function.
436 (ia64_extract_return_value): Handle integral values that are
437 less than 8 bytes long.
438 (ia64_push_dummy_call): Likewise.
440 2011-01-13 Joel Brobecker <brobecker@adacore.com>
442 * ia64-tdep.c (floatformat_ia64_ext_little): Renames
443 floatformat_ia64_ext.
444 (floatformat_ia64_ext_big): New static const.
445 (floatformats_ia64_ext): Set first entry to &floatformat_ia64_ext_big.
447 2011-01-12 Tom Tromey <tromey@redhat.com>
449 * mi/mi-symbol-cmds.c (mi_cmd_symbol_list_lines): Fix error
451 * mi/mi-main.c (mi_cmd_thread_select): Fix error messages.
452 (mi_cmd_thread_list_ids): Likewise.
453 (mi_cmd_data_list_changed_registers): Likewise.
454 (mi_cmd_data_list_register_values): Likewise.
455 (mi_cmd_data_write_register_values): Likewise.
456 (mi_cmd_data_evaluate_expression): Likewise.
457 (mi_cmd_data_read_memory): Likewise.
458 (mi_cmd_data_read_memory_bytes): Likewise.
459 (mi_cmd_data_write_memory): Likewise.
460 (mi_cmd_enable_timings): Likewise.
461 * mi/mi-interp.c (mi_cmd_interpreter_exec): Fix error messages.
462 * mi/mi-cmd-var.c (mi_cmd_var_create): Fix error messages.
463 (mi_cmd_var_delete): Likewise.
464 (mi_cmd_var_set_format): Likewise.
465 (mi_cmd_var_show_format): Likewise.
466 (mi_cmd_var_info_num_children): Likewise.
467 (mi_cmd_var_list_children): Likewise.
468 (mi_cmd_var_info_type): Likewise.
469 (mi_cmd_var_info_expression): Likewise.
470 (mi_cmd_var_show_attributes): Likewise.
471 (mi_cmd_var_assign): Likewise.
472 (mi_cmd_var_update): Likewise.
473 (mi_cmd_enable_pretty_printing): Likewise.
474 (mi_cmd_var_set_update_range): Likewise.
475 * mi/mi-cmd-target.c (mi_cmd_target_file_get): Fix error
477 (mi_cmd_target_file_put): Likewise.
478 (mi_cmd_target_file_delete): Likewise.
479 * mi/mi-cmd-stack.c (mi_cmd_stack_list_frames): Fix error
481 (mi_cmd_stack_info_depth): Likewise.
482 (mi_cmd_stack_list_locals): Likewise.
483 (mi_cmd_stack_list_args): Likewise.
484 (mi_cmd_stack_select_frame): Likewise.
485 (mi_cmd_stack_select_frame): Likewise.
486 (mi_cmd_stack_info_frame): Likewise.
487 * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file): Fix error
489 (mi_cmd_file_list_exec_source_files): Likewise.
490 * mi/mi-cmd-env.c (mi_cmd_env_pwd): Fix error messages.
491 (mi_cmd_env_cd): Likewise.
492 (mi_cmd_env_path): Likewise.
493 (mi_cmd_env_dir): Likewise.
494 (mi_cmd_inferior_tty_show): Likewise.
495 * mi/mi-cmd-disas.c (mi_cmd_disassemble): Fix error messages.
496 * mi/mi-cmd-break.c (mi_cmd_break_insert): Fix error messages.
497 (mi_cmd_break_watch): Likewise.
499 2011-01-12 Thiago Jung Bauermann <bauerman@br.ibm.com>
501 * ppc-linux-nat.c (booke_cmp_hw_point): Fix whitespace.
502 (ppc_linux_insert_hw_breakpoint): Likewise.
503 (ppc_linux_remove_hw_breakpoint): Likewise.
504 (ppc_linux_insert_watchpoint): Likewise.
506 2011-01-12 Andrew Burgess <aburgess@broadcom.com>
507 Jan Kratochvil <jan.kratochvil@redhat.com>
509 PR fortran/11104 and DWARF unbound arrays detection.
510 * dwarf2read.c (read_subrange_type): Set zero length on unspecified
511 upper bound. Set TYPE_HIGH_BOUND_UNDEFINED if not language_ada on
512 unspecified upper bound.
513 * eval.c (evaluate_subexp_standard) <multi_f77_subscript>: Remove
514 variables array_size_array, tmp_type and offset_item. New variable
515 array. Remove call to f77_get_upperbound. New variables array_type
516 and index. Call value_subscripted_rvalue for each dimenasion. Remove
517 the final call to deprecated_set_value_type.
519 2011-01-12 Jan Kratochvil <jan.kratochvil@redhat.com>
521 Make value allocations more lazy.
522 * ada-lang.c (coerce_unspec_val_to_type): Use allocate_value_lazy
523 instead of allocate_value and set_value_lazy when possible.
524 * dwarf2loc.c (dwarf2_evaluate_loc_desc_full): Use allocate_value_lazy
525 instead of allocate_value and set_value_lazy.
526 * findvar.c (value_of_register_lazy): Likewise.
527 (read_var_value): Remove V preallocation, call just check_typedef in
528 advance. Move allocate_value to LOC_CONST, LOC_LABEL,
529 LOC_CONST_BYTES. Use allocate_value_lazy in LOC_STATIC, LOC_ARG,
530 LOC_REF_ARG, LOC_LOCAL, LOC_BLOCK. Set ADDR instead of
531 set_value_address and break in LOC_BLOCK. Use allocate_value_lazy and
532 remove lval_memory set in LOC_REGPARM_ADDR. Use allocate_value_lazy
533 in LOC_UNRESOLVED and LOC_OPTIMIZED_OUT. Add setting lval_memory at
534 the end, remove set_value_lazy there.
535 * valarith.c (value_subscripted_rvalue): Use allocate_value_lazy
536 instead of allocate_value and set_value_lazy when possible.
537 * valops.c (value_fetch_lazy): Do nop for value_optimized_out VAL.
538 * value.c (allocate_computed_value): Use allocate_value_lazy instead
539 of allocate_value and set_value_lazy.
540 (value_from_contents_and_address): Use allocate_value_lazy instead of
541 allocate_value and set_value_lazy when possible.
543 2011-01-12 Andrew Burgess <aburgess@broadcom.com>
545 * disasm.c (dump_insns): Support dumping opcodes for MI.
546 * mi/mi-cmd-disas.c (mi_cmd_disassemble): Allow mode to control
547 dumping of instruction opcodes.
549 2011-01-09 Robert Millan <rmh@gnu.org> (tiny patch)
551 * configure.tgt: Detect GNU/kFreeBSD and set `gdb_osabi'
554 2011-01-11 Tom Tromey <tromey@redhat.com>
556 * thread.c (do_captured_thread_select): Emit newline before
559 2011-01-11 Michael Snyder <msnyder@vmware.com>
561 * s390-tdep.c: Comment cleanup, mostly periods and spaces.
562 * score-tdep.c: Ditto.
563 * score-tdep.h: Ditto.
568 * ser-mingw.c: Ditto.
572 * sh64-tdep.c: Ditto.
573 * shnbsd-nat.c: Ditto.
577 * solib-darwin.c: Ditto.
578 * solib-frv.c: Ditto.
580 * solib-irix.c: Ditto.
581 * solib-osf.c: Ditto.
582 * solib-pa64.c: Ditto.
583 * solib-som.c: Ditto.
584 * solib-spu.c: Ditto.
585 * solib-sunos.c: Ditto.
586 * solib-svr4.c: Ditto.
588 * sol-thread.c: Ditto.
592 * sparc64-linux-tdep.c: Ditto.
593 * sparc64-tdep.c: Ditto.
594 * sparc-linux-nat.c: Ditto.
595 * sparc-linux-tdep.c: Ditto.
596 * sparc-sol2-nat.c: Ditto.
597 * sparc-sol2-tdep.c: Ditto.
598 * sparc-tdep.c: Ditto.
599 * sparc-tdep.h: Ditto.
601 * stabsread.c: Ditto.
602 * stabsread.h: Ditto.
610 * target-descriptions.c: Ditto.
611 * target-descriptions.h: Ditto.
613 * target-memory.c: Ditto.
617 * tracepoint.c: Ditto.
618 * tracepoint.h: Ditto.
619 * trad-frame.h: Ditto.
620 * typeprint.c: Ditto.
622 2011-01-11 Michael Snyder <msnyder@vmware.com>
624 * ui-file.c: Comment cleanup, mostly periods and spaces.
629 * v850-tdep.c: Ditto.
642 * windows-nat.c: Ditto.
643 * windows-tdep.c: Ditto.
644 * xcoffread.c: Ditto.
645 * xcoffsolib.c: Ditto.
646 * xml-support.c: Ditto.
647 * xstormy16-tdep.c: Ditto.
648 * xtensa-tdep.c: Ditto.
649 * xtensa-tdep.h: Ditto.
651 2011-01-11 Thiago Jung Bauermann <bauerman@br.ibm.com>
653 * breakpoint.c (resources_needed_watchpoint): Fix indentation.
654 * gdbtypes.c (is_scalar_type_recursive): Fix formatting.
656 2011-01-11 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
657 Thiago Jung Bauermann <bauerman@br.ibm.com>
659 Implement support for PowerPC BookE ranged watchpoints.
661 (struct breakpoint_ops) <resources_needed>: New method.
662 Initialize to NULL in all existing breakpoint_ops instances.
663 (struct breakpoint) <exact>: New field.
664 (target_exact_watchpoints): Declare external global.
665 * breakpoint.c (target_exact_watchpoints): New global flag.
666 (update_watchpoint): Set b->type to bp_hardware_watchpoint and
667 b->enable_state to bp_enabled before calling
668 hw_watchpoint_used_count.
669 (hw_watchpoint_used_count): Iterate over all bp_locations in a
670 watchpoint. Call breakpoint's breakpoint_ops.resources_needed
672 (insert_watchpoint, remove_watchpoint): Use fixed length of 1 byte
673 if the watchpoint is exact.
674 (resources_needed_watchpoint): New function.
675 (watchpoint_breakpoint_ops): Add resources_needed_watchpoint.
676 (watch_command_1): Set b->exact if the user asked for an exact
677 watchpoint and one can be set.
678 (can_use_hardware_watchpoint): Add exact_watchpoints argument.
679 Pass fixed length of 1 to target_region_ok_for_hw_watchpoint if
680 the user asks for an exact watchpoint and one can be set. Return
681 number of needed debug registers to watch the expression.
682 * gdbtypes.c (is_scalar_type): New function, based on
683 valprint.c:scalar_type_p.
684 (is_scalar_type_recursive): New function.
685 * gdbtypes.h (is_scalar_type_recursive): Declare.
686 * ppc-linux-nat.c (ppc_linux_region_ok_for_hw_watchpoint): Always
687 handle regions when ranged watchpoints are available.
688 (create_watchpoint_request): New function.
689 (ppc_linux_insert_watchpoint, ppc_linux_remove_watchpoint): Use
690 create_watchpoint_request.
691 * rs6000-tdep.c (show_powerpc_exact_watchpoints): New function.
692 (_initialize_rs6000_tdep): Add `exact-watchpoints' boolean to the
693 `set powerpc' and `show powerpc' commands.
694 * target.h (struct target_ops) <to_region_ok_for_hw_watchpoint>:
695 Mention documentation comment in the target macro.
696 (target_region_ok_for_hw_watchpoint): Document return value.
698 2011-01-11 Thiago Jung Bauermann <bauerman@br.ibm.com>
700 * breakpoint.c (update_watchpoint): Decide on using a software or
701 hardware watchpoint after the bp_locations are created.
703 2010-01-11 Thiago Jung Bauermann <bauerman@br.ibm.com>
705 Convert hardware watchpoints to use breakpoint_ops.
706 * breakpoint.h (breakpoint_ops) <insert>: Rename to...
707 <insert_location>: ... this. Return int instead of void.
708 Accept pointer to struct bp_location instead of pointer to
709 struct breakpoint. Adapt all implementations.
710 (breakpoint_ops) <remove>: Rename to...
711 <remove_location>: ... this. Accept pointer to struct bp_location
712 instead of pointer to struct breakpoint. Adapt all implementations.
713 * breakpoint.c (insert_catchpoint): Delete function.
714 (insert_bp_location): Call the watchpoint or catchpoint's
715 breakpoint_ops.insert method.
716 (remove_breakpoint_1): Call the watchpoint or catchpoint's
717 breakpoint_ops.remove method.
718 (insert_watchpoint, remove_watchpoint): New functions.
719 (watchpoint_breakpoint_ops): New structure.
720 (watch_command_1): Initialize the OPS field.
721 * inf-child.c (inf_child_insert_fork_catchpoint)
722 (inf_child_remove_fork_catchpoint, inf_child_insert_vfork_catchpoint)
723 (inf_child_remove_vfork_catchpoint, inf_child_insert_exec_catchpoint)
724 (inf_child_remove_exec_catchpoint, inf_child_set_syscall_catchpoint):
726 (inf_child_target): Remove initialization of to_insert_fork_catchpoint,
727 to_remove_fork_catchpoint, to_insert_vfork_catchpoint,
728 to_remove_vfork_catchpoint, to_insert_exec_catchpoint,
729 to_remove_exec_catchpoint and to_set_syscall_catchpoint.
730 * target.c (update_current_target): Change default implementation of
731 to_insert_fork_catchpoint, to_remove_fork_catchpoint,
732 to_insert_vfork_catchpoint, to_remove_vfork_catchpoint,
733 to_insert_exec_catchpoint, to_remove_exec_catchpoint and
734 to_set_syscall_catchpoint to return_one.
735 (debug_to_insert_fork_catchpoint, debug_to_insert_vfork_catchpoint)
736 (debug_to_insert_exec_catchpoint): Report return value.
737 * target.h (to_insert_fork_catchpoint, to_insert_vfork_catchpoint)
738 (to_insert_exec_catchpoint): Change declaration to return int instead
741 2011-01-11 Michael Snyder <msnyder@vmware.com>
743 * arm-tdep.c: Internationalization.
746 * fork-child.c: Ditto.
747 * nto-procfs.c: Ditto.
748 * ppc-sysv-tdep.c: Ditto.
750 * remote-mips.c: Ditto.
752 * rs6000-nat.c: Ditto.
753 * rs6000-tdep.c: Ditto.
757 * xml-support.c: Ditto.
758 * mi/mi-cmd-break.c: Ditto.
759 * mi/mi-cmd-var.c: Ditto.
760 * mi/mi-interp.c: Ditto.
761 * mi/mi-main.c: Ditto.
763 2011-01-11 Andrew Burgess <aburgess@broadcom.com>
765 * remote-sim.c (gdbsim_store_register): Update API to
766 sim_store_register to check more error conditions.
768 2011-01-10 Michael Snyder <msnyder@vmware.com>
770 * nto-procfs.c: Comment cleanup, mostly periods and spaces.
774 * objc-lang.c: Ditto.
778 * opencl-lang.c: Ditto.
781 * parser-defs.h: Ditto.
784 * posix-hdep.c: Ditto.
785 * ppcbug-rom.c: Ditto.
786 * ppc-linux-nat.c: Ditto.
787 * ppc-linux-tdep.c: Ditto.
788 * ppc-linux-tdep.h: Ditto.
789 * ppcnbsd-tdep.c: Ditto.
790 * ppcobsd-tdep.c: Ditto.
791 * ppcobsd-tdep.h: Ditto.
792 * ppc-sysv-tdep.c: Ditto.
796 * proc-flags.c: Ditto.
798 * proc-utils.h: Ditto.
799 * progspace.h: Ditto.
800 * prologue-value.c: Ditto.
801 * prologue-value.h: Ditto.
804 * p-typeprint.c: Ditto.
805 * p-valprint.c: Ditto.
806 * ravenscar-sparc-thread.c: Ditto.
807 * ravenscar-thread.c: Ditto.
808 * ravenscar-thread.h: Ditto.
813 * remote-fileio.c: Ditto.
814 * remote-fileio.h: Ditto.
816 * remote-m32r-sdi.c: Ditto.
817 * remote-mips.c: Ditto.
818 * remote-sim.c: Ditto.
819 * rs6000-aix-tdep.c: Ditto.
820 * rs6000-nat.c: Ditto.
821 * rs6000-tdep.c: Ditto.
823 2011-01-10 Michael Snyder <msnyder@vmware.com>
825 * charset.c (validate): Internationalization.
826 * coffread.c (read_one_sym): Ditto.
827 * dwarf2read.c (dwarf2_attach_fields_to_type): Ditto.
828 * h8300-tdep.c (H8300_extract_return_value): Ditto.
829 * inflow.c (new_tty): Ditto.
830 * iq2000-tdep.c (iq2000_breakpoint_from_pc): Ditto.
831 * m32c-tdep.c (m32c_return_value): Ditto.
832 * mep-tdep.c (mep_store_return_value): Ditto.
833 * score-tdep.c (score7_fetch_insn): Ditto.
834 * ser-mingw.c (pipe_windows_open): Ditto.
835 * sh64-tdep.c (sh64_extract_return_value): Ditto.
836 * spu-tdep.c (spu_register_type): Ditto.
837 * tracepoint.c (trace_find_command): Ditto.
838 * valarith.c (value_pos): Ditto.
840 2011-01-10 Joel Brobecker <brobecker@adacore.com>
842 * ada-valprint.c (printstr): Minor comment reformatting.
844 2011-01-08 Michael Snyder <msnyder@vmware.com>
846 * m32r-rom.c (m32r_upload_command): Fix up ARI warnings for _
849 2011-01-08 Michael Snyder <msnyder@vmware.com>
851 * h8300-tdep.c: Comment cleanup, mostly periods and spaces.
852 * hppa-hpux-tdep.c: Ditto.
853 * hppa-linux-nat.c: Ditto.
854 * hppa-linux-tdep.c: Ditto.
855 * hppanbsd-tdep.c: Ditto.
856 * hppa-tdep.c: Ditto.
857 * hppa-tdep.h: Ditto.
858 * hpux-thread.c: Ditto.
859 * i386-cygwin-tdep.c: Ditto.
860 * i386-darwin-nat.c: Ditto.
861 * i386gnu-nat.c: Ditto.
862 * i386-linux-nat.c: Ditto.
863 * i386-linux-tdep.c: Ditto.
866 * i386nbsd-tdep.c: Ditto.
867 * i386-sol2-nat.c: Ditto.
868 * i386-stub.c: Ditto.
869 * i386-tdep.c: Ditto.
870 * i386-tdep.h: Ditto.
871 * i387-tdep.c: Ditto.
872 * ia64-linux-nat.c: Ditto.
873 * ia64-linux-tdep.c: Ditto.
874 * ia64-tdep.c: Ditto.
885 * iq2000-tdep.c: Ditto.
886 * irix5-nat.c: Ditto.
892 * jv-typeprint.c: Ditto.
893 * jv-valprint.c: Ditto.
897 * linux-fork.c: Ditto.
898 * linux-nat.c: Ditto.
899 * linux-thread-db.c: Ditto.
900 * lm32-tdep.c: Ditto.
902 2011-01-08 Michael Snyder <msnyder@vmware.com>
904 * m2-exp.y: Comment cleanup, mostly periods and spaces.
906 * m2-typeprint.c: Ditto.
907 * m2-valprint.c: Ditto.
908 * m32c-tdep.c: Ditto.
909 * m32r-linux-nat.c: Ditto.
911 * m32r-tdep.c: Ditto.
912 * m32r-tdep.h: Ditto.
913 * m68hc11-tdep.c: Ditto.
914 * m58klinux-nat.c: Ditto.
915 * m68k-tdep.c: Ditto.
916 * m88k-tdep.c: Ditto.
917 * m88k-tdep.h: Ditto.
918 * machoread.c: Ditto.
924 * mdebugread.c: Ditto.
925 * mdebugread.h: Ditto.
928 * memory-map.h: Ditto.
930 * microblaze-rom.c: Ditto.
931 * microblaze-tdep.c: Ditto.
933 * mips-irix-tdep.c: Ditto.
934 * mips-linux-nat.c: Ditto.
935 * mips-linux-tdep.c: Ditto.
936 * mips-linux-tdep.h: Ditto.
937 * mipsnbsd-nat.c: Ditto.
938 * mipsnbsd-tdep.c: Ditto.
940 * mips-tdep.c: Ditto.
941 * mips-tdep.h: Ditto.
942 * mn10300-linux-tdep.c: Ditto.
943 * mn10300-tdep.c: Ditto.
944 * mn10300-tdep.h: Ditto.
947 * moxie-tdep.c: Ditto.
948 * moxie-tdep.h: Ditto.
951 2011-01-08 Mike Frysinger <vapier@gentoo.org>
953 * bfin-tdep.h (BFIN_A0_DOT_W_REGNUM): Fix typo in name.
955 2011-01-08 Robert Millan <rmh@gnu.org>
957 * fbsd-nat.c (fbsd_find_memory_regions): Fix typo.
959 2011-01-07 Michael Snyder <msnyder@vmware.com>
961 * charset.c (_initialize_charset): Fix typo in string.
963 2011-01-07 Michael Snyder <msnyder@vmware.com>
965 * mi/mi-cmd-disas.c (mi_cmd_disassemble): Mark up error message
967 * tui/tui-layout.c (tui_set_layout_for_display_command):
968 Split line so that operator goes to beginning of line.
969 * tui/tui-winsource.c (tui_horizontal_source_scroll): Move
970 assignment out of if statement.
972 2011-01-07 Michael Snyder <msnyder@vmware.com>
974 * ada-lang.c: Comment cleanup, mostly periods and spaces.
976 * ada-tasks.c: Ditto.
977 * ada-valprint.c: Ditto.
978 * aix-threads.c: Ditto.
979 * alpha-linux-nat.c: Ditto.
980 * alpha-linux-tdep.c: Ditto.
981 * alpha-mdebug-tdep.c: Ditto.
982 * alpha-nat.c: Ditto.
983 * alpha-osf1-tdep.c: Ditto.
984 * alpha-tdep.c: Ditto.
985 * alphabsd-nat.c: Ditto.
986 * alphabsd-tdep.c: Ditto.
987 * amd64-darwin-tdep.c: Ditto.
988 * amd64-linux-nat.c: Ditto.
989 * amd64-linux-tdep.c: Ditto.
990 * amd64-sol2-tdep.c: Ditto.
991 * amd64-tdep.c: Ditto.
992 * amd64-fbsd-tdep.c: Ditto.
993 * amd64-nbsd-tdep.c: Ditto.
994 * amd64-obsd-tdep.c: Ditto.
995 * amd64-linux-nat.c: Ditto.
996 * amd64-linux-tdep.c: Ditto.
999 * armnbsd-nat.c: Ditto.
1000 * avr-tdep.c: Ditto.
1001 * bfin-tdep.c: Ditto.
1003 * c-typeprintc: Ditto.
1004 * c-valprint.c: Ditto.
1005 * coff-pe-read.h: Ditto.
1006 * coffreead.c: Ditto.
1007 * cris-tdep.c: Ditto.
1009 * darwin-nat-info.c: Ditto.
1010 * darwin-nat.c: Ditto.
1011 * dbug-rom.c: Ditto.
1015 * dec-thread.c: Ditto.
1017 * demangle.c: Ditto.
1018 * dicos-tdep.c: Ditto.
1019 * dictionary.c: Ditto.
1020 * dictionary.h: Ditto.
1021 * dink32-rom.c: Ditto.
1023 * doublest.c: Ditto.
1025 * dummy-frame.c: Ditto.
1026 * dwarf2-frame.c: Ditto.
1027 * dwarf2expr.c: Ditto.
1028 * dwarf2loc.c: Ditto.
1029 * dwarf2read.c: Ditto.
1033 * event-top.h: Ditto.
1034 * exceptions.c: Ditto.
1035 * exceptions.h: Ditto.
1037 * expprint.c: Ditto.
1038 * expression.h: Ditto.
1042 * f-typeprint.c: Ditto.
1043 * f-valprint.c: Ditto.
1044 * fbsd-nat.c: Ditto.
1046 * fork-child.c: Ditto.
1049 * frv-linux-tdep.c: Ditto.
1050 * frv-tdep.c: Ditto.
1052 * gdb-stabs.h: Ditto.
1053 * gdb_assert.h: Ditto.
1054 * gdb_string.h: Ditto.
1055 * gdb_thread_db.h: Ditto.
1056 * gdb_wait.h: Ditto.
1057 * gdbarch.sh: Ditto.
1059 * gdbthread.h: Ditto.
1060 * gdbtypes.c: Ditto.
1061 * gdbtypes.h: Ditto.
1064 * gnu-v2-abi.c: Ditto.
1065 * gnu-v3-abi.c: Ditto.
1066 * go32-nat.c: Ditto.
1067 * gdbarch.c: Regenerate.
1068 * gdbarch.h: Regenerate.
1070 2011-01-07 Michael Snyder <msnyder@vmware.com>
1072 * ax-gdb.c: Adjust some long output strings.
1073 * breakpoint.c: Ditto.
1078 * linux-nat.c: Ditto.
1079 * solib-pa64.c: Ditto.
1080 * solib-som.c: Ditto.
1082 2011-01-06 Tom Tromey <tromey@redhat.com>
1086 * python/python.c (GdbMethods): Add "newest_frame" method.
1087 * python/python-internal.h (gdbpy_newest_frame): Declare.
1088 * python/py-frame.c (gdbpy_newest_frame): New function.
1090 2010-01-06 Paul Pluzhnikov <ppluzhnikov@google.com>
1092 * jit.h (struct jit_code_entry): use ULONGEST for symfile_size.
1093 * jit.c (jit_debug): New variable.
1094 (show_jit_debug): New function.
1095 (struct target_buffer): Use ULONGEST.
1096 (bfd_open_from_target_memory): Likewise.
1097 (jit_register_code, jit_inferior_init): Add debug output.
1098 (_initialize_jit): Register "debug jit" command.
1100 2011-01-06 Tom Tromey <tromey@redhat.com>
1102 * frame.h (enum frame_type) <INLINE_FRAME>: Fix comment.
1103 * python/py-frame.c (gdbpy_initialize_frames): Add INLINE_FRAME
1106 2011-01-06 Tom Tromey <tromey@redhat.com>
1108 * python/py-frame.c (frapy_block): Use get_frame_block.
1110 2011-01-06 Joel Brobecker <brobecker@adacore.com>
1112 Do not stop on SIGPRIO signals by default
1113 * infrun.c (_initialize_infrun): Unset signal_stop and
1114 signal_print for TARGET_SIGNAL_PRIO.
1116 2011-01-06 Joel Brobecker <brobecker@adacore.com>
1118 * ada-tasks.c: Fix style violation in comment.
1120 2011-01-06 Joel Brobecker <brobecker@adacore.com>
1122 * linespec.c (decode_compound, find_method): Remove trailing \n
1123 at end of error string.
1124 * solib-irix.c (irix_current_sos): Likewise.
1125 * varobj.c (uninstall_variable): Likewise.
1127 2011-01-06 Joel Brobecker <brobecker@adacore.com>
1129 * copyright.py: New script.
1130 * copyright.sh (byhand): Add *.ads, *.adb, *.gpr and *.inc.
1131 Launch emacs without exec'ing. Call copyright.py afterwards.
1133 2011-01-05 Michael Snyder <msnyder@vmware.com>
1135 * addrmap.c: Shorten lines of >= 80 columns.
1136 * arch-utils.c: Ditto.
1137 * arch-utils.h: Ditto.
1139 * ax-general.c: Ditto.
1141 * blockframe.c: Ditto.
1142 * breakpoint.c: Ditto.
1143 * buildsym.c: Ditto.
1145 * c-typeprint.c: Ditto.
1147 * coffread.c: Ditto.
1151 * cp-namespace.c: Ditto.
1152 * cp-support.c: Ditto.
1153 * dbug-rom.c: Ditto.
1158 * dictionary.c: Ditto.
1160 * doublest.c: Ditto.
1161 * dwarf2-frame.c: Ditto.
1162 * dwarf2expr.c: Ditto.
1163 * dwarf2loc.c: Ditto.
1164 * dwarf2read.c: Ditto.
1167 * event-loop.c: Ditto.
1168 * event-loop.h: Ditto.
1169 * exceptions.h: Ditto.
1171 * expprint.c: Ditto.
1172 * expression.h: Ditto.
1174 * f-valprint.c: Ditto.
1176 * frame-base.c: Ditto.
1177 * frame-unwind.c: Ditto.
1178 * frame-unwind.h: Ditto.
1182 * gdb-stabs.h: Ditto.
1183 * gdb_assert.h: Ditto.
1184 * gdb_dirent.h: Ditto.
1185 * gdb_obstack.h: Ditto.
1187 * gdbtypes.c: Ditto.
1188 * gdbtypes.h: Ditto.
1189 * inf-ttrace.c: Ditto.
1194 * inline-frame.h: Ditto.
1195 * language.c: Ditto.
1196 * language.h: Ditto.
1197 * libunwind-frame.c: Ditto.
1198 * libunwind-frame.h: Ditto.
1199 * linespec.c: Ditto.
1200 * linux-nat.c: Ditto.
1201 * linux-nat.h: Ditto.
1202 * linux-thread-db.c: Ditto.
1203 * machoread.c: Ditto.
1204 * macroexp.c: Ditto.
1205 * macrotab.c: Ditto.
1208 * mdebugread.c: Ditto.
1213 * objfiles.c: Ditto.
1214 * objfiles.h: Ditto.
1216 * p-typeprint.c: Ditto.
1217 * p-valprint.c: Ditto.
1219 * printcmd.c: Ditto.
1220 * proc-events.c: Ditto.
1222 * progspace.c: Ditto.
1223 * progspace.h: Ditto.
1224 * psympriv.h: Ditto.
1227 * regcache.c: Ditto.
1228 * regcache.h: Ditto.
1229 * remote-fileio.c: Ditto.
1231 * ser-mingw.c: Ditto.
1233 * ser-unix.c: Ditto.
1236 * solib-frv.c: Ditto.
1237 * solib-irix.c: Ditto.
1238 * solib-osf.c: Ditto.
1239 * solib-pa64.c: Ditto.
1240 * solib-som.c: Ditto.
1241 * solib-sunos.c: Ditto.
1242 * solib-svr4.c: Ditto.
1243 * solib-target.c: Ditto.
1247 * stabsread.c: Ditto.
1248 * stabsread.c: Ditto.
1251 * symfile-mem.c: Ditto.
1257 * target-descriptions.c: Ditto.
1258 * target-memory.c: Ditto.
1261 * terminal.h: Ditto.
1264 * tracepoint.c: Ditto.
1265 * tracepoint.h: Ditto.
1269 * user-regs.c: Ditto.
1270 * user-regs.h: Ditto.
1272 * valarith.c: Ditto.
1274 * valprint.c: Ditto.
1275 * valprint.h: Ditto.
1280 * xcoffread.c: Ditto.
1281 * xcoffsolib.c: Ditto.
1282 * xcoffsolib.h: Ditto.
1283 * xml-syscall.c: Ditto.
1284 * xml-tdesc.c: Ditto.
1286 2011-01-05 Michael Snyder <msnyder@vmware.com>
1288 * cli/cli-cmds.c: Shorten lines of >= 80 columns.
1289 * cli/cli-decode.c: Ditto.
1290 * cli/cli-dump.c: Ditto.
1291 * cli/cli-logging.c: Ditto.
1292 * cli/cli-script.c: Ditto.
1293 * cli/cli-setshow.c: Ditto.
1294 * common/signals.c: Ditto.
1295 * mi/mi-cmd-break.c: Ditto.
1296 * mi/mi-cmd-disas.c: Ditto.
1297 * mi/mi-cmd-stack.c: Ditto.
1298 * mi/mi-cmd-var.c: Ditto.
1299 * mi/mi-cmds.c: Ditto.
1300 * mi/mi-common.h: Ditto.
1301 * mi/mi-console.c: Ditto.
1302 * mi/mi-interp.c: Ditto.
1303 * mi/mi-main.c: Ditto.
1304 * osf-share/cma_attr.c: Ditto.
1305 * osf-share/cma_deb_core.h: Ditto.
1306 * osf-share/cma_debug_client.h: Ditto.
1307 * osf-share/cma_handle.h: Ditto.
1308 * osf-share/cma_mutex.h: Ditto.
1309 * osf-share/cma_stack_int.h: Ditto.
1310 * osf-share/cma_tcb_defs.h: Ditto.
1311 * python/py-auto-load.c: Ditto.
1312 * python/py-breakpoint.c: Ditto.
1313 * python/py-cmd.c: Ditto.
1314 * python/py-frame.c: Ditto.
1315 * python/py-objfile.c: Ditto.
1316 * python/py-param.c: Ditto.
1317 * python/py-progspace.c: Ditto.
1318 * python/py-symbol.c: Ditto.
1319 * python/py-value.c: Ditto.
1320 * python/python-internal.h: Ditto.
1321 * python/python.c: Ditto.
1322 * tui/tui-data.c: Ditto.
1323 * tui/tui-disasm.c: Ditto.
1324 * tui/tui-hooks.c: Ditto.
1325 * tui/tui-io.c: Ditto.
1326 * tui/tui-layout.c: Ditto.
1327 * tui/tui-regs.c: Ditto.
1328 * tui/tui-source.c: Ditto.
1329 * tui/tui-stack.c: Ditto.
1330 * tui/tui-win.c: Ditto.
1331 * tui/tui-windata.c: Ditto.
1332 * tui/tui-winsource.c: Ditto.
1334 2011-01-05 Joel Brobecker <brobecker@adacore.com>
1336 * configure.ac, gdb.1: Copyright year update.
1338 2011-01-03 Jan Kratochvil <jan.kratochvil@redhat.com>
1340 * frame.c (get_prev_frame_1) <UNWIND_INNER_ID>: New variables
1341 this_pc_in_block, morestack_msym and morestack_name. Check for
1342 "__morestack" minimal symbol there.
1344 2011-01-03 Joel Brobecker <brobecker@adacore.com>
1346 * symfile.c (find_sym_fns): Add call to dont_repeat.
1348 2011-01-01 Joel Brobecker <brobecker@adacore.com>
1350 Copyright year update in most files (performed by copyright.sh).
1352 2011-01-01 Joel Brobecker <brobecker@adacore.com>
1354 * top.c (print_gdb_version): Update copyright year in version output.
1356 For older changes see ChangeLog-2010.
1362 version-control: never