gdb/ChangeLog

   1 2014-02-26  Tom Tromey  <tromey@redhat.com>
   2
   3         * symtab.h (struct minimal_symbol) <mginfo>: Rename from ginfo.
   4         (MSYMBOL_VALUE, MSYMBOL_VALUE_ADDRESS, MSYMBOL_VALUE_BYTES)
   5         (MSYMBOL_BLOCK_VALUE, MSYMBOL_VALUE_CHAIN, MSYMBOL_LANGUAGE)
   6         (MSYMBOL_SECTION, MSYMBOL_OBJ_SECTION, MSYMBOL_NATURAL_NAME)
   7         (MSYMBOL_LINKAGE_NAME, MSYMBOL_PRINT_NAME, MSYMBOL_DEMANGLED_NAME)
   8         (MSYMBOL_SET_LANGUAGE, MSYMBOL_SEARCH_NAME)
   9         (MSYMBOL_MATCHES_SEARCH_NAME, MSYMBOL_SET_NAMES): New macros.
  10         * ada-lang.c (ada_main_name): Update.
  11         (ada_lookup_simple_minsym): Update.
  12         (ada_make_symbol_completion_list): Update.
  13         (ada_add_standard_exceptions): Update.
  14         * ada-tasks.c (read_atcb, ada_tasks_inferior_data_sniffer): Update.
  15         * aix-thread.c (pdc_symbol_addrs, pd_enable): Update.
  16         * amd64-windows-tdep.c (amd64_skip_main_prologue): Update.
  17         * arm-tdep.c (skip_prologue_function): Update.
  18         (arm_skip_stack_protector, arm_skip_stub): Update.
  19         * arm-wince-tdep.c (arm_pe_skip_trampoline_code): Update.
  20         (arm_wince_skip_main_prologue): Update.
  21         * auxv.c (ld_so_xfer_auxv): Update.
  22         * avr-tdep.c (avr_scan_prologue): Update.
  23         * ax-gdb.c (gen_var_ref): Update.
  24         * block.c (call_site_for_pc): Update.
  25         * blockframe.c (get_pc_function_start): Update.
  26         (find_pc_partial_function_gnu_ifunc): Update.
  27         * breakpoint.c (create_overlay_event_breakpoint): Update.
  28         (create_longjmp_master_breakpoint): Update.
  29         (create_std_terminate_master_breakpoint): Update.
  30         (create_exception_master_breakpoint): Update.
  31         (resolve_sal_pc): Update.
  32         * bsd-uthread.c (bsd_uthread_lookup_address): Update.
  33         * btrace.c (ftrace_print_function_name, ftrace_function_switched):
  34         Update.
  35         * c-valprint.c (c_val_print): Update.
  36         * coff-pe-read.c (add_pe_forwarded_sym): Update.
  37         * coffread.c (coff_symfile_read): Update.
  38         * common/agent.c (agent_look_up_symbols): Update.
  39         * dbxread.c (find_stab_function_addr): Update.
  40         (end_psymtab): Update.
  41         * dwarf2loc.c (call_site_to_target_addr): Update.
  42         (func_verify_no_selftailcall): Update.
  43         (tailcall_dump): Update.
  44         (call_site_find_chain_1): Update.
  45         (dwarf_expr_reg_to_entry_parameter): Update.
  46         * elfread.c (elf_gnu_ifunc_record_cache): Update.
  47         (elf_gnu_ifunc_resolve_by_got): Update.
  48         * f-valprint.c (info_common_command): Update.
  49         * findvar.c (read_var_value): Update.
  50         * frame.c (get_prev_frame_1): Update.
  51         (inside_main_func): Update.
  52         * frv-tdep.c (frv_skip_main_prologue): Update.
  53         (frv_frame_this_id): Update.
  54         * glibc-tdep.c (glibc_skip_solib_resolver): Update.
  55         * gnu-v2-abi.c (gnuv2_value_rtti_type): Update.
  56         * gnu-v3-abi.c (gnuv3_rtti_type): Update.
  57         (gnuv3_skip_trampoline): Update.
  58         * hppa-hpux-tdep.c (hppa32_hpux_in_solib_call_trampoline): Update.
  59         (hppa64_hpux_in_solib_call_trampoline): Update.
  60         (hppa_hpux_skip_trampoline_code): Update.
  61         (hppa64_hpux_search_dummy_call_sequence): Update.
  62         (hppa_hpux_find_import_stub_for_addr): Update.
  63         (hppa_hpux_find_dummy_bpaddr): Update.
  64         * hppa-tdep.c (hppa_symbol_address)
  65         (hppa_lookup_stub_minimal_symbol): Update.
  66         * i386-tdep.c (i386_skip_main_prologue): Update.
  67         (i386_pe_skip_trampoline_code): Update.
  68         * ia64-tdep.c (ia64_convert_from_func_ptr_addr): Update.
  69         * infcall.c (get_function_name): Update.
  70         * infcmd.c (until_next_command): Update.
  71         * jit.c (jit_breakpoint_re_set_internal): Update.
  72         (jit_inferior_init): Update.
  73         * linespec.c (minsym_found): Update.
  74         (add_minsym): Update.
  75         * linux-fork.c (info_checkpoints_command): Update.
  76         * linux-nat.c (get_signo): Update.
  77         * linux-thread-db.c (inferior_has_bug): Update.
  78         * m32c-tdep.c (m32c_return_value): Update.
  79         (m32c_m16c_address_to_pointer): Update.
  80         (m32c_m16c_pointer_to_address): Update.
  81         * m32r-tdep.c (m32r_frame_this_id): Update.
  82         * m68hc11-tdep.c (m68hc11_get_register_info): Update.
  83         * machoread.c (macho_resolve_oso_sym_with_minsym): Update.
  84         * maint.c (maintenance_translate_address): Update.
  85         * minsyms.c (add_minsym_to_hash_table): Update.
  86         (add_minsym_to_demangled_hash_table): Update.
  87         (msymbol_objfile): Update.
  88         (lookup_minimal_symbol): Update.
  89         (iterate_over_minimal_symbols): Update.
  90         (lookup_minimal_symbol_text): Update.
  91         (lookup_minimal_symbol_by_pc_name): Update.
  92         (lookup_minimal_symbol_solib_trampoline): Update.
  93         (lookup_minimal_symbol_by_pc_section_1): Update.
  94         (lookup_minimal_symbol_and_objfile): Update.
  95         (prim_record_minimal_symbol_full): Update.
  96         (compare_minimal_symbols): Update.
  97         (compact_minimal_symbols): Update.
  98         (build_minimal_symbol_hash_tables): Update.
  99         (install_minimal_symbols): Update.
 100         (terminate_minimal_symbol_table): Update.
 101         (find_solib_trampoline_target): Update.
 102         (minimal_symbol_upper_bound): Update.
 103         * mips-linux-tdep.c (mips_linux_skip_resolver): Update.
 104         * mips-tdep.c (mips_stub_frame_sniffer): Update.
 105         (mips_skip_pic_trampoline_code): Update.
 106         * msp430-tdep.c (msp430_skip_trampoline_code): Update.
 107         * objc-lang.c (selectors_info): Update.
 108         (classes_info): Update.
 109         (find_methods): Update.
 110         (find_imps): Update.
 111         (find_objc_msgsend): Update.
 112         * objfiles.c (objfile_relocate1): Update.
 113         * objfiles.h (ALL_OBJFILE_MSYMBOLS): Update.
 114         * obsd-tdep.c (obsd_skip_solib_resolver): Update.
 115         * p-valprint.c (pascal_val_print): Update.
 116         * parse.c (write_exp_msymbol): Update.
 117         * ppc-linux-tdep.c (powerpc_linux_in_dynsym_resolve_code)
 118         (ppc_linux_spe_context_lookup, ppc_elfv2_skip_entrypoint): Update.
 119         * ppc-sysv-tdep.c (convert_code_addr_to_desc_addr): Update.
 120         * printcmd.c (build_address_symbolic): Update.
 121         (sym_info): Update.
 122         (address_info): Update.
 123         * proc-service.c (ps_pglobal_lookup): Update.
 124         * psymtab.c (find_pc_sect_psymtab_closer): Update.
 125         (find_pc_sect_psymtab): Update.
 126         * python/py-framefilter.c (py_print_frame): Update.
 127         * ravenscar-thread.c (get_running_thread_id): Update.
 128         * record-btrace.c (btrace_call_history, btrace_get_bfun_name):
 129         Update.
 130         * remote.c (remote_check_symbols): Update.
 131         * rs6000-tdep.c (rs6000_skip_main_prologue): Update.
 132         (rs6000_skip_trampoline_code): Update.
 133         * sh64-tdep.c (sh64_elf_make_msymbol_special): Update.
 134         * sol2-tdep.c (sol2_skip_solib_resolver): Update.
 135         * solib-dsbt.c (lm_base): Update.
 136         * solib-frv.c (lm_base): Update.
 137         (main_got): Update.
 138         * solib-irix.c (locate_base): Update.
 139         * solib-som.c (som_solib_create_inferior_hook): Update.
 140         (som_solib_desire_dynamic_linker_symbols): Update.
 141         (link_map_start): Update.
 142         * solib-spu.c (spu_enable_break): Update.
 143         (ocl_enable_break): Update.
 144         * solib-svr4.c (elf_locate_base): Update.
 145         (enable_break): Update.
 146         * spu-tdep.c (spu_get_overlay_table): Update.
 147         (spu_catch_start): Update.
 148         (flush_ea_cache): Update.
 149         * stabsread.c (define_symbol): Update.
 150         (scan_file_globals): Update.
 151         * stack.c (find_frame_funname): Update.
 152         (frame_info): Update.
 153         * symfile.c (simple_read_overlay_table): Update.
 154         (simple_overlay_update): Update.
 155         * symmisc.c (dump_msymbols): Update.
 156         * symtab.c (fixup_section): Update.
 157         (find_pc_sect_line): Update.
 158         (skip_prologue_sal): Update.
 159         (search_symbols): Update.
 160         (print_msymbol_info): Update.
 161         (rbreak_command): Update.
 162         (MCOMPLETION_LIST_ADD_SYMBOL): New macro.
 163         (completion_list_objc_symbol): Update.
 164         (default_make_symbol_completion_list_break_on): Update.
 165         * tracepoint.c (scope_info): Update.
 166         * tui/tui-disasm.c (tui_find_disassembly_address): Update.
 167         (tui_get_begin_asm_address): Update.
 168         * valops.c (find_function_in_inferior): Update.
 169         * value.c (value_static_field): Update.
 170         (value_fn_field): Update.
 171
 172 2014-02-26  Tom Tromey  <tromey@redhat.com>
 173
 174         * blockframe.c (find_pc_partial_function_gnu_ifunc): Use
 175         bound minimal symbols.  Move code that knows about minsym
 176         table layout...
 177         * minsyms.c (minimal_symbol_upper_bound): ... here.  New
 178         function.
 179         * minsyms.h (minimal_symbol_upper_bound): Declare.
 180         * objc-lang.c (find_objc_msgsend): Use bound minimal symbols,
 181         minimal_symbol_upper_bound.
 182
 183 2014-02-27  Joel Brobecker  <brobecker@adacore.com>
 184
 185         * python/lib/gdb/printing.py (RegexpCollectionPrettyPrinter):
 186         Use the type's name if its basic type does not have a tag.
 187
 188 2014-02-27  Joel Brobecker  <brobecker@adacore.com>
 189
 190         * dwarf2read.c (read_subrange_type): Add comment.
 191
 192 2014-02-27  Joel Brobecker  <brobecker@adacore.com>
 193
 194         * dwarf2read.c (update_enumeration_type_from_children): New
 195         function, mostly extracted from process_structure_scope.
 196         (read_enumeration_type): Call update_enumeration_type_from_children.
 197         (process_enumeration_scope): Do not set THIS_TYPE's flag_unsigned
 198         and flag_flag_enum fields.
 199
 200 2014-02-26  Pedro Alves  <palves@redhat.com>
 201
 202         * bsd-uthread.c (bsd_uthread_xfer_partial): Delete function.
 203         (bsd_uthread_target): Don't install bsd_uthread_xfer_partial as
 204         to_xfer_partial method.
 205
 206 2014-02-26  Pedro Alves  <palves@redhat.com>
 207
 208         * target.c (complete_target_initialization): Don't install
 209         default_xfer_partial as to_xfer_partial hook.
 210         (nomemory): Delete.
 211         (update_current_target): Don't INHERIT nor de_fault
 212         deprecated_xfer_memory.  Delete de_fault macro.
 213         (default_xfer_partial, deprecated_debug_xfer_memory): Delete.
 214         (setup_target_debug): Don't install a deprecated_xfer_memory hook.
 215         * target.h (struct target_ops) <deprecated_xfer_memory>: Delete
 216         field.
 217
 218 2014-02-26  Pedro Alves  <palves@redhat.com>
 219
 220         * go32-nat.c (my_write_child): New function.
 221         (go32_xfer_memory): Rewrite as to_xfer_partial helper.
 222         (go32_xfer_partial): New function.
 223         (init_go32_ops): Don't install a deprecated_xfer_memory hook.
 224         Instead install a to_xfer_partial hook.
 225
 226 2014-02-26  Pedro Alves  <palves@redhat.com>
 227
 228         * nto-procfs.c (procfs_xfer_memory): Adjust interface as a
 229         to_xfer_partial helper.  Rewrite.
 230         (procfs_xfer_partial): New function.
 231         (init_procfs_ops): Don't install a deprecated_xfer_memory hook.
 232         Install a to_xfer_partial hook.
 233
 234 2014-02-26  Pedro Alves  <palves@redhat.com>
 235
 236         * remote-m32r-sdi.c (send_data): Constify 'buf' parameter.
 237         (m32r_xfer_memory): Adjust as a to_xfer_partial helper.
 238         (m32r_xfer_partial): New function.
 239         (init_m32r_ops): Don't install a deprecated_xfer_memory hook.
 240         Install a to_xfer_partial hook.
 241
 242 2014-02-26  Pedro Alves  <palves@redhat.com>
 243
 244         * remote-mips.c (mips_xfer_memory): Adjust as to_xfer_partial
 245         helper.
 246         (mips_xfer_partial): New function.
 247         (_initialize_remote_mips): Don't install a deprecated_xfer_memory
 248         hook.  Install a to_xfer_partial hook.
 249
 250 2014-02-26  Joel Brobecker  <brobecker@adacore.com>
 251
 252         * gdbtypes.h (create_array_type_with_stride): Add declaration.
 253         * gdbtypes.c (create_array_type_with_stride): New function,
 254         renaming create_array_type, but with an added parameter
 255         called "bit_stride".
 256         (create_array_type): Re-implement using
 257         create_array_type_with_stride.
 258         * dwarf2read.c (read_array_type): Add support for DW_AT_byte_stride
 259         and DW_AT_bit_stride attributes.
 260
 261 2014-02-26  Pedro Alves  <palves@redhat.com>
 262
 263         * breakpoint.c (bpstat_check_breakpoint_conditions): Handle
 264         task-specific breakpoints.
 265
 266 2014-02-25  Pedro Alves  <palves@redhat.com>
 267
 268         * ia64-linux-nat.c (ia64_linux_xfer_partial): Reimplement
 269         handling of object == TARGET_OBJECT_UNWIND_TABLE.
 270
 271 2014-02-25  Stan Shebs  <stan@codesourcery.com>
 272
 273         * defs.h: Annotate comments for Doxygen.
 274
 275 2014-02-25  Tom Tromey  <tromey@redhat.com>
 276
 277         * target.h (target_ignore): Don't declare.
 278         * target.c (target_ignore): Remove.
 279
 280 2014-02-25  Jan Kratochvil  <jan.kratochvil@redhat.com>
 281
 282         PR gdb/16626
 283         * auto-load.c (auto_load_objfile_script_1): Change filename to
 284         debugfile.
 285
 286 2014-02-25  Joel Brobecker  <brobecker@adacore.com>
 287
 288         * ia64-linux-nat.c (ia64_linux_xfer_partial): Add function
 289         documentation.  Adjust prototype to match the target_ops
 290         to_xfer_partial method.  Adjust implementation accordingly.
 291
 292 2014-02-25  Hui Zhu  <hui@codesourcery.com>
 293
 294         * target.h (target_ops): Fix TARGET_DEFAULT_RETURN of
 295         to_traceframe_info.
 296
 297 2014-02-25  Kevin Buettner  <kevinb@redhat.com>
 298
 299         * rl78-tdep.c (RL78_BANK0_RP0_PTR_REGNUM, RL78_BANK0_RP1_PTR_REGNUM)
 300         (RL78_BANK0_RP2_PTR_REGNUM, RL78_BANK0_RP3_PTR_REGNUM)
 301         (RL78_BANK1_RP0_PTR_REGNUM, RL78_BANK1_RP1_PTR_REGNUM)
 302         (RL78_BANK1_RP2_PTR_REGNUM, RL78_BANK1_RP3_PTR_REGNUM)
 303         (RL78_BANK2_RP0_PTR_REGNUM, RL78_BANK2_RP1_PTR_REGNUM)
 304         (RL78_BANK2_RP2_PTR_REGNUM, RL78_BANK2_RP3_PTR_REGNUM)
 305         (RL78_BANK3_RP0_PTR_REGNUM, RL78_BANK3_RP1_PTR_REGNUM)
 306         (RL78_BANK3_RP2_PTR_REGNUM, RL78_BANK3_RP3_PTR_REGNUM):
 307         New constants.
 308         (rl78_register_type): Use a data pointer type for SP and
 309         new pseudo registers mentioned above.  Use a 16 bit integer
 310         type for all other register pairs.
 311         (rl78_register_name, rl78_g10_register_name): Update for
 312         new pseudo registers.
 313         (rl78_pseudo_register_read): Likewise.
 314         (rl78_pseudo_register_write): Likewise.
 315         (rl78_dwarf_reg_to_regnum): Return register numbers representing
 316         to the newly added pseudo registers.
 317
 318 2014-02-24  Doug Evans  <dje@google.com>
 319
 320         * value.c (record_latest_value): Fix comment.
 321         * printcmd.c (print_command_1): Remove code to handle -1 return from
 322         record_latest_value.
 323
 324 2014-02-24  Pedro Alves  <palves@redhat.com>
 325
 326         * procfs.c (procfs_target): Don't install procfs_xfer_memory as
 327         deprecated_xfer_memory hook.
 328         (procfs_xfer_partial): Call procfs_xfer_memory instead
 329         of the deprecated_xfer_memory target hook.
 330         (procfs_xfer_memory): Adjust interface as a to_xfer_partial
 331         helper.
 332
 333 2014-02-24  Yuanhui Zhang  <asmwarrior@gmail.com>
 334
 335         * windows-nat.c (windows_xfer_shared_libraries): Return
 336         TARGET_XFER_EOF if LEN is zero to fix an assert failure when
 337         requested object is TARGET_OBJECT_LIBRARIES.
 338
 339 2014-02-24  Yao Qi  <yao@codesourcery.com>
 340
 341         * target.h (enum target_xfer_status)
 342         <TARGET_XFER_E_UNAVAILABLE>: Rename it to ...
 343         <TARGET_XFER_UNAVAILABLE>: ... it with setting value 2
 344         explicitly.  New.
 345         * corefile.c (memory_error_message): User updated.
 346         * exec.c (section_table_read_available_memory): Likewise.
 347         * record-btrace.c (record_btrace_xfer_partial): Likewise.
 348         * target.c (target_xfer_status_to_string): Likewise.
 349         (raw_memory_xfer_partial): Likewise.
 350         (memory_xfer_partial_1, target_xfer_partial): Likewise.
 351         * valops.c (read_value_memory): Likewise.
 352         * exec.h: Update comments.
 353
 354 2014-02-24  Yao Qi  <yao@codesourcery.com>
 355
 356         * target.c (target_xfer_status_to_string): Rename argument err
 357         to status.
 358         * target.h (target_xfer_status_to_string): Update declaration.
 359         Replace target_xfer_error_to_string with
 360         target_xfer_status_to_string in comment.
 361
 362 2014-02-24  Yao Qi  <yao@codesourcery.com>
 363
 364         * mips-linux-nat.c (super_close): Update its type.
 365         (mips_linux_close): Pass 'self' to super_close.
 366
 367 2014-02-24  Yao Qi  <yao@codesourcery.com>
 368
 369         * target.h (TARGET_XFER_STATUS_ERROR_P): Remove.
 370         * corefile.c (read_memory): Adjusted.
 371         * target.c (target_write_with_progress): Adjusted.
 372
 373 2014-02-23  Yao Qi  <yao@codesourcery.com>
 374
 375         Revert two patches:
 376
 377         2013-10-25  Yao Qi  <yao@codesourcery.com>
 378
 379         * remote.c (remote_traceframe_info): Return early if
 380         traceframe is not selected.
 381
 382         2013-07-19  Yao Qi  <yao@codesourcery.com>
 383
 384         * target.c (update_current_target): Change the default action
 385         of 'to_traceframe_info' from tcomplain to return_zero.
 386         * target.h (struct target_ops) <to_traceframe_info>: Add more
 387         comments.
 388
 389 2014-02-23  Yao Qi  <yao@codesourcery.com>
 390
 391         * valops.c (read_value_memory): Rewrite it.  Call
 392         target_xfer_partial in a loop.
 393         * exec.h (section_table_available_memory): Remove declaration.
 394         Move comments to ...
 395         * exec.c (section_table_available_memory): ... here.  Make it
 396         static.
 397
 398 2014-02-23  Yao Qi  <yao@codesourcery.com>
 399
 400         * exec.c (section_table_read_available_memory): New function.
 401         * exec.h (section_table_read_available_memory): Declare.
 402         * ctf.c (ctf_xfer_partial): Call
 403         section_table_read_available_memory.
 404         * tracefile-tfile.c (tfile_xfer_partial): Likewise.
 405
 406 2014-02-23  Yao Qi  <yao@codesourcery.com>
 407
 408         * ctf.c (ctf_xfer_partial): Move code to ...
 409         * exec.c (exec_read_partial_read_only): ... it.  New function.
 410         * tracefile-tfile.c (tfile_xfer_partial): Likewise.
 411         * tracefile.c: Include "exec.h".
 412         * exec.h (exec_read_partial_read_only): Declare.
 413
 414 2014-02-23  Yao Qi  <yao@codesourcery.com>
 415
 416         * tracefile-tfile.c (tfile_has_all_memory): Remove.
 417         (tfile_has_memory): Remove.
 418         (init_tfile_ops): Don't set fields to_has_all_memory and
 419         to_has_memory of tfile_ops.
 420         * tracefile.c (tracefile_has_all_memory): New function.
 421         (tracefile_has_memory): New function.
 422         (init_tracefile_ops): Initialize fields to_has_all_memory and
 423         to_has_memory of 'ops'.
 424
 425 2014-02-23  Yao Qi  <yao@codesourcery.com>
 426
 427         * ctf.c (ctf_has_stack, ctf_has_registers): Remove.
 428         (ctf_thread_alive, ctf_get_trace_status): Remove.
 429         (init_ctf_ops): Don't set some fields of ctf_ops.  Call
 430         init_tracefile_ops.
 431         * tracefile-tfile.c (tfile_get_trace_status): Remove.
 432         (tfile_has_stack, tfile_has_registers): Remove.
 433         (tfile_thread_alive): Remove.
 434         (init_tfile_ops): Don't set some fields of tfile_ops.  Call
 435         init_tracefile_ops.
 436         * tracefile.c (tracefile_has_stack): New function.
 437         (tracefile_has_registers): New function.
 438         (tracefile_thread_alive): New function.
 439         (tracefile_get_trace_status): New function.
 440         (init_tracefile_ops): New function.
 441         * tracefile.h (init_tracefile_ops): Declare.
 442
 443 2014-02-23  Yao Qi  <yao@codesourcery.com>
 444
 445         * tracepoint.c (TFILE_PID): Move it to tracefile-tfile.c.
 446         (O_LARGEFILE): Likewise.
 447         (tfile_ops): Likewise.
 448         (TRACE_HEADER_SIZE): Likewise.
 449         (trace_fd, trace_frames_offset, cur_offset): Likewise.
 450         (cur_data_size): Likewise.
 451         (tfile_read, tfile_open, tfile_interp_line): Likewise.
 452         (tfile_close, tfile_files_info): Likewise.
 453         (tfile_get_trace_status): Likewise.
 454         (tfile_get_tracepoint_status): Likewise.
 455         (tfile_get_traceframe_address): Likewise.
 456         (tfile_trace_find, match_blocktype): Likewise.
 457         (traceframe_walk_blocks, traceframe_find_block_type): Likewise.
 458         (tfile_fetch_registers, tfile_xfer_partial): Likewise.
 459         (tfile_get_trace_state_variable_value): Likewise.
 460         (tfile_has_all_memory, tfile_has_memory): Likewise.
 461         (tfile_has_stack, tfile_has_registers): Likewise.
 462         (tfile_thread_alive, build_traceframe_info): Likewise.
 463         (tfile_traceframe_info, init_tfile_ops): Likewise.
 464         (_initialize_tracepoint): Don't call init_tfile_ops
 465         and add_target_with_completer.
 466         * tracefile-tfile.c: Include regcache.h, inferior.h, gdbthread.h,
 467         exec.h, completer.h and filenames.h.
 468         (_initialize_tracefile_tfile): New function.
 469
 470 2014-02-23  Yao Qi  <yao@codesourcery.com>
 471
 472         * Makefile.in (REMOTE_OBS): Append tracefile.o and
 473         tracefile-tfile.o.
 474         (HFILES_NO_SRCDIR): Add tracefile.h.
 475         * ctf.c: Include "tracefile.h".
 476         * tracefile.h: New file.
 477         * tracefile.c: New file
 478         * tracefile-tfile.c: New file.
 479         * tracepoint.c: Include "tracefile.h".
 480         (free_uploaded_tps, free_uploaded_tsvs): Remove declarations.
 481         (stop_reason_names): Add const.
 482         (trace_file_writer_xfree): Move it to tracefile.c.
 483         (trace_save, trace_save_command, trace_save_tfile): Likewise.
 484         (trace_save_ctf): Likewise.
 485         (struct tfile_trace_file_writer): Move it to tracefile-tfile.c.
 486         (tfile_target_save, tfile_dtor, tfile_start): Likewise.
 487         (tfile_write_header, tfile_write_regblock_type): Likewise.
 488         (tfile_write_status, tfile_write_uploaded_tsv): Likewise.
 489         (tfile_write_uploaded_tp, tfile_write_definition_end): Likewise.
 490         (tfile_write_raw_data, tfile_end): Likewise.
 491         (tfile_trace_file_writer_new): Likewise.
 492         (free_uploaded_tp): Make it extern.
 493         (free_uploaded_tsv): Make it extern.
 494         (_initialize_tracepoint): Move code to register command 'tsave'
 495         to tracefile.c.
 496         * tracepoint.h (stop_reason_names): Declare.
 497         (struct trace_frame_write_ops): Move it to tracefile.h.
 498         (struct trace_file_write_ops): Likewise.
 499         (struct trace_file_writer): Likewise.
 500         (free_uploaded_tsvs, free_uploaded_tps): Declare.
 501
 502 2014-02-21  Jan Kratochvil  <jan.kratochvil@redhat.com>
 503
 504         PR gdb/16594
 505         * common/linux-osdata.c (linux_common_core_of_thread): Find the end of
 506         process name.
 507         (get_cores_used_by_process): New parameter num_cores, use it.
 508         (linux_xfer_osdata_processes): Pass num_cores to it.
 509         * linux-tdep.c (linux_info_proc, linux_fill_prpsinfo): Find the end of
 510         process name.
 511
 512 2014-02-21  Andreas Arnez  <arnez@vnet.linux.ibm.com>
 513
 514         * target.c (memory_xfer_partial): Fix length arg in call to
 515         breakpoint_xfer_memory.
 516
 517 2014-02-20  Sergio Durigan Junior  <sergiodj@redhat.com>
 518
 519         PR tdep/16397
 520         * i386-tdep.c (i386_stap_parse_special_token_triplet): Check if a
 521         number comes after the + or - signs.  Adjust length of register
 522         name to be extracted.
 523
 524 2014-02-20  Tom Tromey  <tromey@redhat.com>
 525
 526         * varobj.h (c_varobj_ops, cplus_varobj_ops, java_varobj_ops)
 527         (ada_varobj_ops): Mark "extern".
 528
 529 2014-02-20  Tom Tromey  <tromey@redhat.com>
 530
 531         * dbxread.c (read_dbx_symtab): Remove last_o_file_start.
 532
 533 2014-02-20  Doug Evans  <xdje42@gmail.com>
 534
 535         * guile/scm-gsmob.c (gdbscm_init_eqable_gsmob): New arg containing_scm.
 536         All callers updated.
 537         (gdbscm_fill_eqable_gsmob_ptr_slot): Delete arg containing_scm.
 538         All callers updated.
 539         * guile/guile-internal.h (gdbscm_init_eqable_gsmob): Update.
 540         (gdbscm_fill_eqable_gsmob_ptr_slot): Update.
 541
 542 2014-02-20  lin zuojian  <manjian2006@gmail.com>
 543             Joel Brobecker  <brobecker@adacore.com>
 544             Doug Evans  <xdje42@gmail.com>
 545
 546         PR symtab/16581
 547         * dwarf2read.c (struct die_info): New member in_process.
 548         (reset_die_in_process): New function.
 549         (process_die): Set it at the start, reset when returning.
 550         (inherit_abstract_dies): Only call process_die if origin_child_die
 551         not already being processed.
 552
 553 2014-02-20  Joel Brobecker  <brobecker@adacore.com>
 554
 555         * windows-nat.c (handle_unload_dll): Add function documentation.
 556         (do_initial_windows_stuff): Add comment explaining why we wait
 557         until after inferior initialization has finished before
 558         processing all DLLs.
 559
 560 2014-02-20  Joel Brobecker  <brobecker@adacore.com>
 561
 562         * windows-nat.c (get_module_name): Delete.
 563         (windows_get_exec_module_filename): New function, mostly
 564         inspired from get_module_name.
 565         (windows_pid_to_exec_file): Replace call to get_module_name
 566         by call to windows_get_exec_module_filename.
 567
 568 2014-02-20  Joel Brobecker  <brobecker@adacore.com>
 569
 570         * windows-nat.c (handle_load_dll): Rewrite this function's
 571         introductory comment.  Remove code using get_module_name
 572         to get the DLL's name.
 573
 574 2014-02-20  Joel Brobecker  <brobecker@adacore.com>
 575
 576         * windows-nat.c (get_windows_debug_event): Ignore
 577         LOAD_DLL_DEBUG_EVENT and UNLOAD_DLL_DEBUG_EVENT
 578         if windows_initialization_done == 0.
 579         (windows_add_all_dlls): Renames windows_ensure_ntdll_loaded.
 580         Adjust implementation to always load all DLLs.
 581         (do_initial_windows_stuff): Replace call to
 582         windows_ensure_ntdll_loaded by call to windows_add_all_dlls.
 583
 584 2014-02-20  Joel Brobecker  <brobecker@adacore.com>
 585
 586         * windows-nat.c (_initialize_windows_nat): Deprecate the
 587         "dll-symbols" command.  Turn the "add-shared-symbol-files"
 588         and "assf" aliases into commands, and deprecate them as well.
 589         * NEWS: Add entry explaining that "dll-symbols" and its two
 590         aliases are now deprecated.
 591
 592 2014-02-20  Joel Brobecker  <brobecker@adacore.com>
 593
 594         * dec-thread.c (dec_thread_get_ada_task_ptid): Avoid unescaped
 595         new-line in debug string.  Remove trailing spaces.
 596
 597 2014-02-19  Stan Shebs  <stan@codesourcery.com>
 598
 599         * darwin-nat.c (darwin_xfer_partial): Fix return type.
 600
 601 2014-02-19  Siva Chandra Reddy  <sivachandra@google.com>
 602
 603         * NEWS: Add entry for the new feature
 604         * python/py-value.c (valpy_binop): Call value_x_binop for struct
 605         and class values.
 606
 607 2014-02-19  Stan Shebs  <stan@codesourcery.com>
 608
 609         * MAINTAINERS: List Yao Qi as nios2 maintainer.
 610
 611 2014-02-19  Pedro Alves  <palves@redhat.com>
 612
 613         * common/ptid.h (struct ptid): Mention that process_stratum
 614         targets should prefer ptid.lwp.
 615
 616 2014-02-19  Pedro Alves  <palves@redhat.com>
 617
 618         * remote.c (remote_thread_alive, write_ptid, read_ptid)
 619         (read_ptid, remote_newthread_step, remote_threads_extra_info)
 620         (remote_get_ada_task_ptid, append_resumption, remote_stop_ns)
 621         (threadalive_test, remote_pid_to_str): Use the ptid.lwp field to
 622         store remote thread ids rather than ptid.tid.
 623         (_initialize_remote): Adjust.
 624
 625 2014-02-19  Tom Tromey  <tromey@redhat.com>
 626
 627         * target.c (target_get_unwinder): Rewrite.
 628         (target_get_tailcall_unwinder): Rewrite.
 629         * record-btrace.c (record_btrace_to_get_unwinder): New function.
 630         (record_btrace_to_get_tailcall_unwinder): New function.
 631         (init_record_btrace_ops): Update.
 632         * target.h (struct target_ops) <to_get_unwinder,
 633         to_get_tailcall_unwinder>: Now function pointers.  Use
 634         TARGET_DEFAULT_RETURN.
 635
 636 2014-02-19  Tom Tromey  <tromey@redhat.com>
 637
 638         * nto-procfs.c (procfs_remove_hw_breakpoint): Add 'self'
 639         argument.
 640         (init_procfs_ops): Correctly set to_remove_hw_breakpoint.
 641
 642 2014-02-19  Tom Tromey  <tromey@redhat.com>
 643
 644         * record-btrace.c (record_btrace_decr_pc_after_break): Delegate
 645         directly.
 646         * target-delegates.c: Rebuild.
 647         * target.h (struct target_ops) <to_decr_pc_after_break>: Use
 648         TARGET_DEFAULT_FUNC.
 649         * target.c (default_target_decr_pc_after_break): Rename from
 650         forward_target_decr_pc_after_break.  Simplify.
 651         (target_decr_pc_after_break): Rely on delegation.
 652
 653 2014-02-19  Tom Tromey  <tromey@redhat.com>
 654
 655         * target.c (update_current_target): Do not INHERIT to_doc or
 656         to_magic.  Do not de_fault to_open or to_close.
 657
 658 2014-02-19  Tom Tromey  <tromey@redhat.com>
 659
 660         * gcore.h (objfile_find_memory_regions): Declare.
 661         * gcore.c (objfile_find_memory_regions): No longer static.  Add
 662         "self" argument.
 663         (_initialize_gcore): Don't call exec_set_find_memory_regions.
 664         * exec.c: Include gcore.h.
 665         (exec_set_find_memory_regions): Remove.
 666         (exec_find_memory_regions): Remove.
 667         (exec_do_find_memory_regions): Remove.
 668         (init_exec_ops): Update.
 669         * defs.h (exec_set_find_memory_regions): Remove.
 670
 671 2014-02-19  Tom Tromey  <tromey@redhat.com>
 672
 673         * target-delegates.c: Rebuild.
 674         * target.h (struct target_ops) <to_extra_thread_info,
 675         to_thread_name, to_pid_to_exec_file, to_get_section_table,
 676         to_memory_map, to_read_description, to_traceframe_info>: Use NULL,
 677         not 0, in TARGET_DEFAULT_RETURN.
 678
 679 2014-02-19  Tom Tromey  <tromey@redhat.com>
 680
 681         * target.c (complete_target_initialization): Remove casts.  Use
 682         return_zero_has_execution.
 683         (return_zero): Add "ignore" argument.
 684         (return_zero_has_execution): New function.
 685         (init_dummy_target): Remove casts.  Use
 686         return_zero_has_execution.
 687
 688 2014-02-19  Tom Tromey  <tromey@redhat.com>
 689
 690         * target.c (update_current_target): Update comments.  Do not
 691         INHERIT to_stratum.
 692
 693 2014-02-19  Tom Tromey  <tromey@redhat.com>
 694
 695         * arm-linux-nat.c (arm_linux_read_description): Delegate when
 696         needed.
 697         * corelow.c (core_read_description): Delegate when needed.
 698         * remote.c (remote_read_description): Delegate when needed.
 699         * target-delegates.c: Rebuild.
 700         * target.c (target_read_description): Rewrite.
 701         * target.h (struct target_ops) <to_read_description>: Update
 702         comment.  Use TARGET_DEFAULT_RETURN.
 703
 704 2014-02-19  Tom Tromey  <tromey@redhat.com>
 705
 706         * target-delegates.c: Rebuild.
 707         * target.c (update_current_target): Don't inherit or default
 708         to_can_run.
 709         (find_default_run_target): Check against delegate_can_run.
 710         * target.h (struct target_ops) <to_can_run>: Use
 711         TARGET_DEFAULT_RETURN.
 712
 713 2014-02-19  Tom Tromey  <tromey@redhat.com>
 714
 715         * target-delegates.c: Rebuild.
 716         * target.c (target_disconnect): Unconditionally delegate.
 717         * target.h (struct target_ops) <to_disconnect>: Use
 718         TARGET_DEFAULT_NORETURN.
 719
 720 2014-02-19  Tom Tromey  <tromey@redhat.com>
 721
 722         * record.c (record_stop): Unconditionally delegate.
 723         * target-delegates.c: Rebuild.
 724         * target.c (target_stop_recording): Unconditionally delegate.
 725         * target.h (struct target_ops) <to_stop_recording>: Use
 726         TARGET_DEFAULT_IGNORE.
 727
 728 2014-02-19  Tom Tromey  <tromey@redhat.com>
 729
 730         * target-delegates.c: Rebuild.
 731         * target.c (target_enable_btrace): Unconditionally delegate.
 732         * target.h (struct target_ops) <to_enable_btrace>: Use
 733         TARGET_DEFAULT_NORETURN.
 734
 735 2014-02-19  Tom Tromey  <tromey@redhat.com>
 736
 737         * target-delegates.c: Rebuild.
 738         * target.c (target_read_btrace): Unconditionally delegate.
 739         * target.h (struct target_ops) <to_read_btrace>: Use
 740         TARGET_DEFAULT_NORETURN.
 741
 742 2014-02-19  Tom Tromey  <tromey@redhat.com>
 743
 744         * target-delegates.c: Rebuild.
 745         * target.c (target_teardown_btrace): Unconditionally delegate.
 746         * target.h (struct target_ops) <to_teardown_btrace>: Use
 747         TARGET_DEFAULT_NORETURN.
 748
 749 2014-02-19  Tom Tromey  <tromey@redhat.com>
 750
 751         * target-delegates.c: Rebuild.
 752         * target.c (target_disable_btrace): Unconditionally delegate.
 753         * target.h (struct target_ops) <to_disable_btrace>: Use
 754         TARGET_DEFAULT_NORETURN.
 755
 756 2014-02-19  Tom Tromey  <tromey@redhat.com>
 757
 758         * target-delegates.c: Rebuild.
 759         * target.c (default_search_memory): New function.
 760         (simple_search_memory): Update comment.
 761         (target_search_memory): Unconditionally delegate.
 762         * target.h (struct target_ops) <to_search_memory>: Use
 763         TARGET_DEFAULT_FUNC.
 764
 765 2014-02-19  Tom Tromey  <tromey@redhat.com>
 766
 767         * auxv.c (default_auxv_parse): No longer static.
 768         (target_auxv_parse): Unconditionally delegate.
 769         * auxv.h (default_auxv_parse): Declare.
 770         * target-delegates.c: Rebuild.
 771         * target.c: Include auxv.h.
 772         * target.h (struct target_ops) <to_auxv_parse>: Use
 773         TARGET_DEFAULT_FUNC.
 774
 775 2014-02-19  Tom Tromey  <tromey@redhat.com>
 776
 777         * target-delegates.c: Rebuild.
 778         * target.c (target_memory_map): Unconditionally delegate.
 779         * target.h (struct target_ops) <to_memory_map>: Use
 780         TARGET_DEFAULT_RETURN.
 781
 782 2014-02-19  Tom Tromey  <tromey@redhat.com>
 783
 784         * target-delegates.c: Rebuild.
 785         * target.c (target_thread_alive): Unconditionally delegate.
 786         * target.h (struct target_ops) <to_thread_alive>: Use
 787         TARGET_DEFAULT_RETURN.
 788
 789 2014-02-19  Tom Tromey  <tromey@redhat.com>
 790
 791         * target-delegates.c: Rebuild.
 792         * target.c (target_save_record): Unconditionally delegate.
 793         * target.h (struct target_ops) <to_save_record>: Use
 794         TARGET_DEFAULT_NORETURN.
 795
 796 2014-02-19  Tom Tromey  <tromey@redhat.com>
 797
 798         * target-delegates.c: Rebuild.
 799         * target.c (target_delete_record): Unconditionally delegate.
 800         * target.h (struct target_ops) <to_delete_record>: Use
 801         TARGET_DEFAULT_NORETURN.
 802
 803 2014-02-19  Tom Tromey  <tromey@redhat.com>
 804
 805         * target-delegates.c: Rebuild.
 806         * target.c (target_record_is_replaying): Unconditionally
 807         delegate.
 808         * target.h (struct target_ops) <to_record_is_replaying>: Use
 809         TARGET_DEFAULT_RETURN.
 810
 811 2014-02-19  Tom Tromey  <tromey@redhat.com>
 812
 813         * target-delegates.c: Rebuild.
 814         * target.c (target_goto_record_begin): Unconditionally delegate.
 815         * target.h (struct target_ops) <to_goto_record_begin>: Use
 816         TARGET_DEFAULT_NORETURN.
 817
 818 2014-02-19  Tom Tromey  <tromey@redhat.com>
 819
 820         * target-delegates.c: Rebuild.
 821         * target.c (target_goto_record_end): Unconditionally delegate.
 822         * target.h (struct target_ops) <to_goto_record_end>: Use
 823         TARGET_DEFAULT_NORETURN.
 824
 825 2014-02-19  Tom Tromey  <tromey@redhat.com>
 826
 827         * target-delegates.c: Rebuild.
 828         * target.c (target_goto_record): Unconditionally delegate.
 829         * target.h (struct target_ops) <to_goto_record>: Use
 830         TARGET_DEFAULT_NORETURN.
 831
 832 2014-02-19  Tom Tromey  <tromey@redhat.com>
 833
 834         * target-delegates.c: Rebuild.
 835         * target.c (target_insn_history): Unconditionally delegate.
 836         * target.h (struct target_ops) <to_insn_history>: Use
 837         TARGET_DEFAULT_NORETURN.
 838
 839 2014-02-19  Tom Tromey  <tromey@redhat.com>
 840
 841         * target-delegates.c: Rebuild.
 842         * target.c (target_insn_history_from): Unconditionally delegate.
 843         * target.h (struct target_ops) <to_insn_history_from>: Use
 844         TARGET_DEFAULT_NORETURN.
 845
 846 2014-02-19  Tom Tromey  <tromey@redhat.com>
 847
 848         * target-delegates.c: Rebuild.
 849         * target.c (target_insn_history_range): Unconditionally delegate.
 850         * target.h (struct target_ops) <to_insn_history_range>: Use
 851         TARGET_DEFAULT_NORETURN.
 852
 853 2014-02-19  Tom Tromey  <tromey@redhat.com>
 854
 855         * target-delegates.c: Rebuild.
 856         * target.c (target_call_history): Unconditionally delegate.
 857         * target.h (struct target_ops) <to_call_history>: Use
 858         TARGET_DEFAULT_NORETURN.
 859
 860 2014-02-19  Tom Tromey  <tromey@redhat.com>
 861
 862         * target-delegates.c: Rebuild.
 863         * target.c (target_call_history_from): Unconditionally delegate.
 864         * target.h (struct target_ops) <to_call_history_from>: Use
 865         TARGET_DEFAULT_NORETURN.
 866
 867 2014-02-19  Tom Tromey  <tromey@redhat.com>
 868
 869         * target-delegates.c: Rebuild.
 870         * target.c (target_call_history_range): Unconditionally delegate.
 871         * target.h (struct target_ops) <to_call_history_range>: Use
 872         TARGET_DEFAULT_NORETURN.
 873
 874 2014-02-19  Tom Tromey  <tromey@redhat.com>
 875
 876         * target-delegates.c: Rebuild.
 877         * target.c (target_verify_memory): Unconditionally delegate.
 878         * target.h (struct target_ops) <to_verify_memory>: Use
 879         TARGET_DEFAULT_NORETURN.
 880
 881 2014-02-19  Tom Tromey  <tromey@redhat.com>
 882
 883         * target-delegates.c: Rebuild.
 884         * target.c (target_core_of_thread): Unconditionally delegate.
 885         * target.h (struct target_ops) <to_core_of_thread>: Use
 886         TARGET_DEFAULT_RETURN.
 887
 888 2014-02-19  Tom Tromey  <tromey@redhat.com>
 889
 890         * target-delegates.c: Rebuild.
 891         * target.c (target_flash_done): Unconditionally delegate.
 892         * target.h (struct target_ops) <to_flash_done>: Use
 893         TARGET_DEFAULT_NORETURN.
 894
 895 2014-02-19  Tom Tromey  <tromey@redhat.com>
 896
 897         * target-delegates.c: Rebuild.
 898         * target.c (target_flash_erase): Unconditionally delegate.
 899         * target.h (struct target_ops) <to_flash_erase>: Use
 900         TARGET_DEFAULT_NORETURN.
 901
 902 2014-02-19  Tom Tromey  <tromey@redhat.com>
 903
 904         * target-delegates.c: Rebuild.
 905         * target.c (target_get_section_table): Unconditionally delegate.
 906         * target.h (struct target_ops) <to_get_section_table>: Use
 907         TARGET_DEFAULT_RETURN.
 908
 909 2014-02-19  Tom Tromey  <tromey@redhat.com>
 910
 911         * target-delegates.c: Rebuild.
 912         * target.c (target_pid_to_str): Unconditionally delegate.
 913         (init_dummy_target): Don't initialize to_pid_to_str.
 914         (default_pid_to_str): Rename from dummy_pid_to_str.
 915         * target.h (struct target_ops) <to_pid_to_str>: Use
 916         TARGET_DEFAULT_FUNC.
 917
 918 2014-02-19  Tom Tromey  <tromey@redhat.com>
 919
 920         * target-delegates.c: Rebuild.
 921         * target.c (target_find_new_threads): Unconditionally delegate.
 922         * target.h (struct target_ops) <to_find_new_threads>: Use
 923         TARGET_DEFAULT_RETURN.
 924
 925 2014-02-19  Tom Tromey  <tromey@redhat.com>
 926
 927         * target-delegates.c: Rebuild.
 928         * target.c (target_program_signals): Unconditionally delegate.
 929         * target.h (struct target_ops) <to_program_signals>: Use
 930         TARGET_DEFAULT_IGNORE.
 931
 932 2014-02-19  Tom Tromey  <tromey@redhat.com>
 933
 934         * target-delegates.c: Rebuild.
 935         * target.c (target_pass_signals): Unconditionally delegate.
 936         * target.h (struct target_ops) <to_pass_signals>: Use
 937         TARGET_DEFAULT_IGNORE.
 938
 939 2014-02-19  Tom Tromey  <tromey@redhat.com>
 940
 941         * target-delegates.c: Rebuild.
 942         * target.c (default_mourn_inferior): New function.
 943         (target_mourn_inferior): Unconditionally delegate.
 944         * target.h (struct target_ops) <to_mourn_inferior>: Use
 945         TARGET_DEFAULT_FUNC.
 946
 947 2014-02-19  Tom Tromey  <tromey@redhat.com>
 948
 949         * target-delegates.c: Rebuild.
 950         * target.c (default_follow_fork): New function.
 951         (target_follow_fork): Unconditionally delegate.
 952         * target.h (struct target_ops) <to_follow_fork>: Use
 953         TARGET_DEFAULT_FUNC.
 954
 955 2014-02-19  Tom Tromey  <tromey@redhat.com>
 956
 957         * target-delegates.c: Rebuild.
 958         * target.c (target_kill): Unconditionally delegate.
 959         * target.h (struct target_ops) <to_kill>: Use
 960         TARGET_DEFAULT_NORETURN.
 961
 962 2014-02-19  Tom Tromey  <tromey@redhat.com>
 963
 964         * target-delegates.c: Rebuild.
 965         * target.c (target_masked_watch_num_registers): Unconditionally
 966         delegate.
 967         * target.h (struct target_ops) <to_masked_watch_num_registers>:
 968         Use TARGET_DEFAULT_RETURN.
 969
 970 2014-02-19  Tom Tromey  <tromey@redhat.com>
 971
 972         * target-delegates.c: Rebuild.
 973         * target.c (target_remove_mask_watchpoint): Unconditionally
 974         delegate.
 975         * target.h (struct target_ops) <to_remove_mask_watchpoint>: Use
 976         TARGET_DEFAULT_RETURN.
 977
 978 2014-02-19  Tom Tromey  <tromey@redhat.com>
 979
 980         * target-delegates.c: Rebuild.
 981         * target.c (target_insert_mask_watchpoint): Unconditionally
 982         delegate.
 983         * target.h (struct target_ops) <to_insert_mask_watchpoint>: Use
 984         TARGET_DEFAULT_RETURN.
 985
 986 2014-02-19  Tom Tromey  <tromey@redhat.com>
 987
 988         * target-delegates.c: Rebuild.
 989         * target.c (target_ranged_break_num_registers): Unconditionally
 990         delegate.
 991         * target.h (struct target_ops) <to_ranged_break_num_registers>:
 992         Use TARGET_DEFAULT_RETURN.
 993
 994 2014-02-19  Tom Tromey  <tromey@redhat.com>
 995
 996         * target-delegates.c: Rebuild.
 997         * target.c (target_fetch_registers): Unconditionally delegate.
 998         * target.h (struct target_ops) <to_fetch_registers>: Use
 999         TARGET_DEFAULT_NORETURN.
1000
1001 2014-02-19  Tom Tromey  <tromey@redhat.com>
1002
1003         * target-delegates.c: Rebuild.
1004         * target.c (update_current_target): Don't inherit or default
1005         to_stop.
1006         * target.h (struct target_ops) <to_stop>: Use
1007         TARGET_DEFAULT_IGNORE.
1008
1009 2014-02-19  Tom Tromey  <tromey@redhat.com>
1010
1011         * target-delegates.c: Rebuild.
1012         * target.c (update_current_target): Don't inherit or default
1013         to_can_run_breakpoint_commands.
1014         * target.h (struct target_ops) <to_can_run_breakpoint_commands>:
1015         Use TARGET_DEFAULT_RETURN.
1016
1017 2014-02-19  Tom Tromey  <tromey@redhat.com>
1018
1019         * target-delegates.c: Rebuild.
1020         * target.c (update_current_target): Don't inherit or default
1021         to_supports_evaluation_of_breakpoint_conditions.
1022         * target.h (struct target_ops)
1023         <to_supports_evaluation_of_breakpoint_conditions>: Use
1024         TARGET_DEFAULT_RETURN.
1025
1026 2014-02-19  Tom Tromey  <tromey@redhat.com>
1027
1028         * target-delegates.c: Rebuild.
1029         * target.c (update_current_target): Don't inherit or default
1030         to_augmented_libraries_svr4_read.
1031         * target.h (struct target_ops) <to_augmented_libraries_svr4_read>:
1032         Use TARGET_DEFAULT_RETURN.
1033
1034 2014-02-19  Tom Tromey  <tromey@redhat.com>
1035
1036         * target-delegates.c: Rebuild.
1037         * target.c (update_current_target): Don't inherit or default
1038         to_can_use_agent.
1039         * target.h (struct target_ops) <to_can_use_agent>: Use
1040         TARGET_DEFAULT_RETURN.
1041
1042 2014-02-19  Tom Tromey  <tromey@redhat.com>
1043
1044         * target-delegates.c: Rebuild.
1045         * target.c (update_current_target): Don't inherit or default
1046         to_use_agent.
1047         * target.h (struct target_ops) <to_use_agent>: Use
1048         TARGET_DEFAULT_NORETURN.
1049
1050 2014-02-19  Tom Tromey  <tromey@redhat.com>
1051
1052         * target-delegates.c: Rebuild.
1053         * target.c (update_current_target): Don't inherit or default
1054         to_traceframe_info.
1055         (return_null): Remove.
1056         * target.h (struct target_ops) <to_traceframe_info>: Use
1057         TARGET_DEFAULT_RETURN.
1058
1059 2014-02-19  Tom Tromey  <tromey@redhat.com>
1060
1061         * target-delegates.c: Rebuild.
1062         * target.c (update_current_target): Don't inherit or default
1063         to_static_tracepoint_markers_by_strid.
1064         * target.h (struct target_ops)
1065         <to_static_tracepoint_markers_by_strid>: Use
1066         TARGET_DEFAULT_NORETURN.
1067
1068 2014-02-19  Tom Tromey  <tromey@redhat.com>
1069
1070         * target-delegates.c: Rebuild.
1071         * target.c (update_current_target): Don't inherit or default
1072         to_static_tracepoint_marker_at.
1073         * target.h (struct target_ops) <to_static_tracepoint_marker_at>:
1074         Use TARGET_DEFAULT_RETURN.
1075
1076 2014-02-19  Tom Tromey  <tromey@redhat.com>
1077
1078         * target-delegates.c: Rebuild.
1079         * target.c (update_current_target): Don't inherit or default
1080         to_set_permissions.
1081         * target.h (struct target_ops) <to_set_permissions>: Use
1082         TARGET_DEFAULT_IGNORE.
1083
1084 2014-02-19  Tom Tromey  <tromey@redhat.com>
1085
1086         * target-delegates.c: Rebuild.
1087         * target.c (update_current_target): Don't inherit or default
1088         to_get_tib_address.
1089         * target.h (struct target_ops) <to_get_tib_address>: Use
1090         TARGET_DEFAULT_NORETURN.
1091
1092 2014-02-19  Tom Tromey  <tromey@redhat.com>
1093
1094         * target-delegates.c: Rebuild.
1095         * target.c (update_current_target): Don't inherit or default
1096         to_set_trace_notes.
1097         * target.h (struct target_ops) <to_set_trace_notes>: Use
1098         TARGET_DEFAULT_RETURN.
1099
1100 2014-02-19  Tom Tromey  <tromey@redhat.com>
1101
1102         * target-delegates.c: Rebuild.
1103         * target.c (update_current_target): Don't initialize
1104         to_set_trace_buffer_size.
1105         * target.h (struct target_ops) <to_set_trace_buffer_size>: Use
1106         TARGET_DEFAULT_IGNORE.
1107
1108 2014-02-19  Tom Tromey  <tromey@redhat.com>
1109
1110         * target-delegates.c: Rebuild.
1111         * target.c (update_current_target): Don't inherit or default
1112         to_set_circular_trace_buffer.
1113         * target.h (struct target_ops) <to_set_circular_trace_buffer>: Use
1114         TARGET_DEFAULT_IGNORE.
1115
1116 2014-02-19  Tom Tromey  <tromey@redhat.com>
1117
1118         * target-delegates.c: Rebuild.
1119         * target.c (update_current_target): Don't inherit or default
1120         to_set_disconnected_tracing.
1121         * target.h (struct target_ops) <to_set_disconnected_tracing>: Use
1122         TARGET_DEFAULT_IGNORE.
1123
1124 2014-02-19  Tom Tromey  <tromey@redhat.com>
1125
1126         * target-delegates.c: Rebuild.
1127         * target.c (update_current_target): Don't inherit or default
1128         to_get_min_fast_tracepoint_insn_len.
1129         (return_minus_one): Remove.
1130         * target.h (struct target_ops)
1131         <to_get_min_fast_tracepoint_insn_len>: Use TARGET_DEFAULT_RETURN.
1132
1133 2014-02-19  Tom Tromey  <tromey@redhat.com>
1134
1135         * target-delegates.c: Rebuild.
1136         * target.c (update_current_target): Don't inherit or default
1137         to_get_raw_trace_data.
1138         * target.h (struct target_ops) <to_get_raw_trace_data>: Use
1139         TARGET_DEFAULT_NORETURN.
1140
1141 2014-02-19  Tom Tromey  <tromey@redhat.com>
1142
1143         * target-delegates.c: Rebuild.
1144         * target.c (update_current_target): Don't inherit or default
1145         to_upload_trace_state_variables.
1146         * target.h (struct target_ops) <to_upload_trace_state_variables>:
1147         Use TARGET_DEFAULT_RETURN.
1148
1149 2014-02-19  Tom Tromey  <tromey@redhat.com>
1150
1151         * target-delegates.c: Rebuild.
1152         * target.c (update_current_target): Don't inherit or default
1153         to_upload_tracepoints.
1154         * target.h (struct target_ops) <to_upload_tracepoints>: Use
1155         TARGET_DEFAULT_RETURN.
1156
1157 2014-02-19  Tom Tromey  <tromey@redhat.com>
1158
1159         * target-delegates.c: Rebuild.
1160         * target.c (update_current_target): Don't inherit or default
1161         to_save_trace_data.
1162         * target.h (struct target_ops) <to_save_trace_data>: Use
1163         TARGET_DEFAULT_NORETURN.
1164
1165 2014-02-19  Tom Tromey  <tromey@redhat.com>
1166
1167         * target-delegates.c: Rebuild.
1168         * target.c (update_current_target): Don't inherit or default
1169         to_get_trace_state_variable_value.
1170         * target.h (struct target_ops)
1171         <to_get_trace_state_variable_value>: Use TARGET_DEFAULT_RETURN.
1172
1173 2014-02-19  Tom Tromey  <tromey@redhat.com>
1174
1175         * target-delegates.c: Rebuild.
1176         * target.c (update_current_target): Don't inherit or default
1177         to_trace_find.
1178         * target.h (struct target_ops): Use TARGET_DEFAULT_RETURN.
1179
1180 2014-02-19  Tom Tromey  <tromey@redhat.com>
1181
1182         * target-delegates.c: Rebuild.
1183         * target.c (update_current_target): Don't inherit or default
1184         to_trace_stop.
1185         * target.h (struct target_ops) <to_trace_stop>: Use
1186         TARGET_DEFAULT_NORETURN.
1187
1188 2014-02-19  Tom Tromey  <tromey@redhat.com>
1189
1190         * target-delegates.c: Rebuild.
1191         * target.c (update_current_target): Don't inherit or default
1192         to_get_tracepoint_status.
1193         * target.h (struct target_ops) <to_get_tracepoint_status>: Use
1194         TARGET_DEFAULT_NORETURN.
1195
1196 2014-02-19  Tom Tromey  <tromey@redhat.com>
1197
1198         * target-delegates.c: Rebuild.
1199         * target.c (update_current_target): Don't inherit or default
1200         to_get_trace_status.
1201         * target.h (struct target_ops) <to_get_trace_status>: Use
1202         TARGET_DEFAULT_RETURN.
1203
1204 2014-02-19  Tom Tromey  <tromey@redhat.com>
1205
1206         * target-delegates.c: Rebuild.
1207         * target.c (update_current_target): Don't inherit or default
1208         to_trace_start.
1209         * target.h (struct target_ops) <to_trace_start>: Use
1210         TARGET_DEFAULT_NORETURN.
1211
1212 2014-02-19  Tom Tromey  <tromey@redhat.com>
1213
1214         * target-delegates.c: Rebuild.
1215         * target.c (update_current_target): Don't inherit or default
1216         to_trace_set_readonly_regions.
1217         * target.h (struct target_ops) <to_trace_set_readonly_regions>:
1218         Use TARGET_DEFAULT_NORETURN.
1219
1220 2014-02-19  Tom Tromey  <tromey@redhat.com>
1221
1222         * target-delegates.c: Rebuild.
1223         * target.c (update_current_target): Don't inherit or default
1224         to_disable_tracepoint.
1225         * target.h (struct target_ops) <to_disable_tracepoint>: Use
1226         TARGET_DEFAULT_NORETURN.
1227
1228 2014-02-19  Tom Tromey  <tromey@redhat.com>
1229
1230         * target-delegates.c: Rebuild.
1231         * target.c (update_current_target): Don't inherit or default
1232         to_enable_tracepoint.
1233         * target.h (struct target_ops) <to_enable_tracepoint>: Use
1234         TARGET_DEFAULT_NORETURN.
1235
1236 2014-02-19  Tom Tromey  <tromey@redhat.com>
1237
1238         * target-delegates.c: Rebuild.
1239         * target.c (update_current_target): Don't inherit or default
1240         to_download_trace_state_variable.
1241         * target.h (struct target_ops) <to_download_trace_state_variable>:
1242         Use TARGET_DEFAULT_NORETURN.
1243
1244 2014-02-19  Tom Tromey  <tromey@redhat.com>
1245
1246         * target-delegates.c: Rebuild.
1247         * target.c (update_current_target): Don't inherit or default
1248         to_can_download_tracepoint.
1249         * target.h (struct target_ops) <to_can_download_tracepoint>: Use
1250         TARGET_DEFAULT_RETURN.
1251
1252 2014-02-19  Tom Tromey  <tromey@redhat.com>
1253
1254         * target-delegates.c: Rebuild.
1255         * target.c (update_current_target): Don't inherit or default
1256         to_download_tracepoint.
1257         * target.h (struct target_ops) <to_download_tracepoint>: Use
1258         TARGET_DEFAULT_NORETURN.
1259
1260 2014-02-19  Tom Tromey  <tromey@redhat.com>
1261
1262         * target-delegates.c: Rebuild.
1263         * target.c (update_current_target): Don't inherit or default
1264         to_trace_init.
1265         * target.h (struct target_ops) <to_trace_init>: Use
1266         TARGET_DEFAULT_RETURN.
1267
1268 2014-02-19  Tom Tromey  <tromey@redhat.com>
1269
1270         * target-delegates.c: Rebuild.
1271         * target.c (update_current_target): Don't inherit or default
1272         to_supports_string_tracing.
1273         * target.h (struct target_ops) <to_supports_string_tracing>: Use
1274         TARGET_DEFAULT_RETURN.
1275
1276 2014-02-19  Tom Tromey  <tromey@redhat.com>
1277
1278         * target-delegates.c: Rebuild.
1279         * target.c (update_current_target): Don't inherit or default
1280         to_supports_enable_disable_tracepoint.
1281         * target.h (struct target_ops)
1282         <to_supports_enable_disable_tracepoint>: Use
1283         TARGET_DEFAULT_RETURN.
1284
1285 2014-02-19  Tom Tromey  <tromey@redhat.com>
1286
1287         * target-delegates.c: Rebuild.
1288         * target.c (update_current_target): Don't inherit or default
1289         to_supports_multi_process.
1290         * target.h (struct target_ops) <to_supports_multi_process>: Use
1291         TARGET_DEFAULT_RETURN.
1292
1293 2014-02-19  Tom Tromey  <tromey@redhat.com>
1294
1295         * target-delegates.c: Rebuild.
1296         * target.c (update_current_target): Don't inherit or default
1297         to_get_ada_task_ptid.
1298         * target.h (struct target_ops) <to_get_ada_task_ptid>: Use
1299         TARGET_DEFAULT_FUNC.
1300
1301 2014-02-19  Tom Tromey  <tromey@redhat.com>
1302
1303         * target-delegates.c: Rebuild.
1304         * target.c (update_current_target): Don't inherit or default
1305         to_thread_architecture.
1306         * target.h (struct target_ops) <to_thread_architecture>: Use
1307         TARGET_DEFAULT_FUNC.
1308
1309 2014-02-19  Tom Tromey  <tromey@redhat.com>
1310
1311         * target-delegates.c: Rebuild.
1312         * target.c (update_current_target): Don't inherit or default
1313         to_execution_direction.
1314         * target.h (struct target_ops) <to_execution_direction>: Use
1315         TARGET_DEFAULT_FUNC.
1316
1317 2014-02-19  Tom Tromey  <tromey@redhat.com>
1318
1319         * target-delegates.c: Rebuild.
1320         * target.c (update_current_target): Don't inherit or default
1321         to_can_execute_reverse.
1322         * target.h (struct target_ops) <to_can_execute_reverse>: Use
1323         TARGET_DEFAULT_RETURN.
1324         (target_can_execute_reverse): Unconditionally delegate.
1325
1326 2014-02-19  Tom Tromey  <tromey@redhat.com>
1327
1328         * target-delegates.c: Rebuild.
1329         * target.c (update_current_target): Don't inherit or default
1330         to_goto_bookmark.
1331         (dummy_goto_bookmark): Remove.
1332         (init_dummy_target): Don't inherit or default to_goto_bookmark.
1333         * target.h (struct target_ops) <to_goto_bookmark>: Use
1334         TARGET_DEFAULT_NORETURN.
1335
1336 2014-02-19  Tom Tromey  <tromey@redhat.com>
1337
1338         * target-delegates.c: Rebuild.
1339         * target.c (update_current_target): Don't inherit or default
1340         to_get_bookmark.
1341         (dummy_get_bookmark): Remove.
1342         (init_dummy_target): Don't inherit or default to_get_bookmark.
1343         * target.h (struct target_ops) <to_get_bookmark>: Use
1344         TARGET_DEFAULT_NORETURN
1345
1346 2014-02-19  Tom Tromey  <tromey@redhat.com>
1347
1348         * target-delegates.c: Rebuild.
1349         * target.c (update_current_target): Don't inherit or default
1350         to_make_corefile_notes.
1351         (init_dummy_target): Don't initialize to_make_corefile_notes.
1352         * target.h (struct target_ops) <to_make_corefile_notes>: Use
1353         TARGET_DEFAULT_FUNC.
1354
1355 2014-02-19  Tom Tromey  <tromey@redhat.com>
1356
1357         * target-delegates.c: Rebuild.
1358         * target.c (update_current_target): Don't inherit or default
1359         to_find_memory_regions.
1360         (init_dummy_target): Don't initialize to_find_memory_regions.
1361         * target.h (struct target_ops) <to_find_memory_regions>: Use
1362         TARGET_DEFAULT_FUNC.
1363
1364 2014-02-19  Tom Tromey  <tromey@redhat.com>
1365
1366         * target-delegates.c: Rebuild.
1367         * target.c (update_current_target): Don't inherit or default
1368         to_log_command.
1369         * target.h (struct target_ops) <to_log_command>: Use
1370         TARGET_DEFAULT_IGNORE.
1371         (target_log_command): Unconditionally delegate.
1372
1373 2014-02-19  Tom Tromey  <tromey@redhat.com>
1374
1375         * target-delegates.c: Rebuild.
1376         * target.c (update_current_target): Don't inherit or default
1377         to_pid_to_exec_file.
1378         * target.h (struct target_ops) <to_pid_to_exec_file>: Use
1379         TARGET_DEFAULT_RETURN.
1380
1381 2014-02-19  Tom Tromey  <tromey@redhat.com>
1382
1383         * target-delegates.c: Rebuild.
1384         * target.c (update_current_target): Don't inherit or default
1385         to_thread_name.
1386         (target_thread_name): Unconditionally delegate.
1387         * target.h (struct target_ops) <to_thread_name>: Use
1388         TARGET_DEFAULT_RETURN.
1389
1390 2014-02-19  Tom Tromey  <tromey@redhat.com>
1391
1392         * target-delegates.c: Rebuild.
1393         * target.c (update_current_target): Don't inherit or default
1394         to_extra_thread_info.
1395         * target.h (struct target_ops) <to_extra_thread_info>: Use
1396         TARGET_DEFAULT_RETURN.
1397
1398 2014-02-19  Tom Tromey  <tromey@redhat.com>
1399
1400         * target-delegates.c: Rebuild.
1401         * target.c (update_current_target): Don't inherit or default
1402         to_has_exited.
1403         * target.h (struct target_ops) <to_has_exited>: Use
1404         TARGET_DEFAULT_RETURN..
1405
1406 2014-02-19  Tom Tromey  <tromey@redhat.com>
1407
1408         * target-delegates.c: Rebuild.
1409         * target.c (update_current_target): Don't inherit or default
1410         to_set_syscall_catchpoint.
1411         (return_one): Remove.
1412         * target.h (struct target_ops) <to_set_syscall_catchpoint>: Use
1413         TARGET_DEFAULT_RETURN.
1414
1415 2014-02-19  Tom Tromey  <tromey@redhat.com>
1416
1417         * target-delegates.c: Rebuild.
1418         * target.c (update_current_target): Don't inherit or default
1419         to_insert_exec_catchpoint.
1420         * target.h (struct target_ops) <to_insert_exec_catchpoint>: Use
1421         TARGET_DEFAULT_RETURN.
1422
1423 2014-01-08  Tom Tromey  <tromey@redhat.com>
1424
1425         * target-delegates.c: Rebuild.
1426         * target.c (update_current_target): Don't inherit or default
1427         to_insert_exec_catchpoint.
1428         * target.h (struct target_ops) <to_insert_exec_catchpoint>: Use
1429         TARGET_DEFAULT_RETURN.
1430
1431 2014-02-19  Tom Tromey  <tromey@redhat.com>
1432
1433         * target-delegates.c: Rebuild.
1434         * target.c (update_current_target): Don't inherit or default
1435         to_remove_vfork_catchpoint.
1436         * target.h (struct target_ops) <to_remove_vfork_catchpoint>: Use
1437         TARGET_DEFAULT_RETURN.
1438
1439 2014-02-19  Tom Tromey  <tromey@redhat.com>
1440
1441         * target-delegates.c: Rebuild.
1442         * target.c (update_current_target): Don't inherit or default
1443         to_insert_vfork_catchpoint.
1444         * target.h (struct target_ops) <to_insert_vfork_catchpoint>: Use
1445         TARGET_DEFAULT_RETURN.
1446
1447 2014-02-19  Tom Tromey  <tromey@redhat.com>
1448
1449         * target-delegates.c: Rebuild.
1450         * target.c (update_current_target): Don't inherit or default
1451         to_remove_fork_catchpoint.
1452         * target.h (struct target_ops) <to_remove_fork_catchpoint>: Use
1453         TARGET_DEFAULT_RETURN.
1454
1455 2014-02-19  Tom Tromey  <tromey@redhat.com>
1456
1457         * target-delegates.c: Rebuild.
1458         * target.c (update_current_target): Don't inherit or default
1459         to_insert_fork_catchpoint.
1460         * target.h (struct target_ops) <to_insert_fork_catchpoint>: Use
1461         TARGET_DEFAULT_RETURN.
1462
1463 2014-02-19  Tom Tromey  <tromey@redhat.com>
1464
1465         * target-delegates.c: Rebuild.
1466         * target.c (update_current_target): Don't inherit or default
1467         to_post_startup_inferior.
1468         * target.h (struct target_ops) <to_post_startup_inferior>: Use
1469         TARGET_DEFAULT_IGNORE.
1470
1471 2014-02-19  Tom Tromey  <tromey@redhat.com>
1472
1473         * target-delegates.c: Rebuild.
1474         * target.c (update_current_target): Don't inherit or default
1475         to_load.
1476         * target.h (struct target_ops) <to_load>: Use
1477         TARGET_DEFAULT_NORETURN.
1478
1479 2014-02-19  Tom Tromey  <tromey@redhat.com>
1480
1481         * target-delegates.c: Rebuild.
1482         * target.c (update_current_target): Don't inherit or default
1483         to_terminal_info.
1484         * target.h (struct target_ops) <to_terminal_info>: Use
1485         TARGET_DEFAULT_FUNC.
1486
1487 2014-02-19  Tom Tromey  <tromey@redhat.com>
1488
1489         * target-delegates.c: Rebuild.
1490         * target.c (update_current_target): Don't inherit or default
1491         to_terminal_save_ours.
1492         * target.h (struct target_ops) <to_terminal_save_ours>: Use
1493         TARGET_DEFAULT_IGNORE.
1494
1495 2014-02-19  Tom Tromey  <tromey@redhat.com>
1496
1497         * target-delegates.c: Rebuild.
1498         * target.c (update_current_target): Don't inherit or default
1499         to_terminal_ours.
1500         * target.h (struct target_ops) <to_terminal_ours>: Use
1501         TARGET_DEFAULT_IGNORE.
1502
1503 2014-02-19  Tom Tromey  <tromey@redhat.com>
1504
1505         * target-delegates.c: Rebuild.
1506         * target.c (update_current_target): Don't inherit or default
1507         to_terminal_ours_for_output.
1508         * target.h (struct target_ops) <to_terminal_ours_for_output>: Use
1509         TARGET_DEFAULT_IGNORE.
1510
1511 2014-02-19  Tom Tromey  <tromey@redhat.com>
1512
1513         * target-delegates.c: Rebuild.
1514         * target.c (update_current_target): Don't inherit or default
1515         to_terminal_inferior.
1516         * target.h (struct target_ops) <to_terminal_inferior>: Use
1517         TARGET_DEFAULT_IGNORE.
1518
1519 2014-02-19  Tom Tromey  <tromey@redhat.com>
1520
1521         * target-delegates.c: Rebuild.
1522         * target.c (update_current_target): Don't inherit or default
1523         to_terminal_init.
1524         * target.h (struct target_ops) <to_terminal_init>: Use
1525         TARGET_DEFAULT_IGNORE.
1526
1527 2014-02-19  Tom Tromey  <tromey@redhat.com>
1528
1529         * target-delegates.c: Rebuild.
1530         * target.c (update_current_target): Don't inherit or default
1531         to_can_accel_watchpoint_condition.
1532         * target.h (struct target_ops)
1533         <to_can_accel_watchpoint_condition>: Use TARGET_DEFAULT_RETURN.
1534
1535 2014-02-19  Tom Tromey  <tromey@redhat.com>
1536
1537         * target-delegates.c: Rebuild.
1538         * target.c (update_current_target): Don't inherit or default
1539         to_region_ok_for_hw_watchpoint.
1540         * target.h (struct target_ops) <to_region_ok_for_hw_watchpoint>:
1541         Use TARGET_DEFAULT_FUNC.
1542
1543 2014-02-19  Tom Tromey  <tromey@redhat.com>
1544
1545         * target-delegates.c: Rebuild.
1546         * target.c (update_current_target): Don't inherit or default
1547         to_watchpoint_addr_within_range.
1548         * target.h (struct target_ops) <to_watchpoint_addr_within_range>:
1549         Use TARGET_DEFAULT_FUNC.
1550
1551 2014-02-19  Tom Tromey  <tromey@redhat.com>
1552
1553         * target-delegates.c: Rebuild.
1554         * target.c (update_current_target): Don't inherit or default
1555         to_remove_watchpoint.
1556         * target.h (struct target_ops) <to_remove_watchpoint>: Use
1557         TARGET_DEFAULT_NORETURN.
1558
1559 2014-02-19  Tom Tromey  <tromey@redhat.com>
1560
1561         * target-delegates.c: Rebuild.
1562         * target.c (update_current_target): Don't inherit or default
1563         to_insert_watchpoint.
1564         * target.h (struct target_ops) <to_insert_watchpoint>: Use
1565         TARGET_DEFAULT_RETURN.
1566
1567 2014-02-19  Tom Tromey  <tromey@redhat.com>
1568
1569         * target-delegates.c: Rebuild.
1570         * target.c (update_current_target): Don't inherit or default
1571         to_remove_hw_breakpoint.
1572         * target.h (struct target_ops) <to_remove_hw_breakpoint>: Use
1573         TARGET_DEFAULT_RETURN.
1574
1575 2014-02-19  Tom Tromey  <tromey@redhat.com>
1576
1577         * target-delegates.c: Rebuild.
1578         * target.c (update_current_target): Don't inherit or default
1579         to_insert_hw_breakpoint.
1580         * target.h (struct target_ops) <to_insert_hw_breakpoint>: Use
1581         TARGET_DEFAULT_RETURN.
1582
1583 2014-02-19  Tom Tromey  <tromey@redhat.com>
1584
1585         * target-delegates.c: Rebuild.
1586         * target.c (update_current_target): Don't inherit or default
1587         to_can_use_hw_breakpoint.
1588         * target.h (struct target_ops) <to_can_use_hw_breakpoint>: Use
1589         TARGET_DEFAULT_RETURN.
1590
1591 2014-02-19  Tom Tromey  <tromey@redhat.com>
1592
1593         * target-delegates.c: Rebuild.
1594         * target.c (update_current_target): Don't inherit or default
1595         to_files_info.
1596         * target.h (struct target_ops) <to_files_info>: Use
1597         TARGET_DEFAULT_IGNORE.
1598
1599 2014-02-19  Tom Tromey  <tromey@redhat.com>
1600
1601         * target-delegates.c: Rebuild.
1602         * target.c (update_current_target): Don't inherit or default
1603         to_store.
1604         * target.h (struct target_ops) <to_store>: Use
1605         TARGET_DEFAULT_NORETURN.
1606
1607 2014-02-19  Tom Tromey  <tromey@redhat.com>
1608
1609         * target-delegates.c: Rebuild.
1610         * target.c (update_current_target): Don't inherit or default
1611         to_post_attach.
1612         * target.h (struct target_ops) <to_post_attach>: Use
1613         TARGET_DEFAULT_IGNORE.
1614
1615 2014-02-19  Tom Tromey  <tromey@redhat.com>
1616
1617         * target-delegates.c: Rebuild.
1618         * target.c (update_current_target): Don't inherit or default
1619         to_rcmd.
1620         (default_rcmd): New function.
1621         (do_monitor_command): Unconditionally delegate.
1622         * target.h (struct target_ops) <to_rmcd>: Use
1623         TARGET_DEFAULT_FUNC.
1624
1625 2014-02-19  Tom Tromey  <tromey@redhat.com>
1626
1627         * target-delegates.c: Rebuild.
1628         * target.c (init_dummy_target): Don't initialize to_attach.
1629         (target_attach): Unconditionally delegate.
1630         * target.h (struct target_ops) <to_attach>: Use
1631         TARGET_DEFAULT_FUNC.
1632
1633 2014-02-19  Tom Tromey  <tromey@redhat.com>
1634
1635         * target-delegates.c: Rebuild.
1636         * target.c (target_detach): Unconditionally delegate.
1637         (init_dummy_target): Don't initialize to_detach.
1638         * target.h (struct target_ops) <to_detach>: Use
1639         TARGET_DEFAULT_IGNORE.
1640
1641 2014-02-19  Tom Tromey  <tromey@redhat.com>
1642
1643         * target.h (struct target_ops) <to_augmented_libraries_svr4_read>:
1644         Add argument.
1645         (target_augmented_libraries_svr4_read): Add argument.
1646         * target.c (update_current_target): Update.
1647         * remote.c (remote_augmented_libraries_svr4_read): Add 'self'
1648         argument.
1649
1650 2014-02-19  Tom Tromey  <tromey@redhat.com>
1651
1652         * target.h (struct target_ops) <to_call_history_range>: Add
1653         argument.
1654         * target.c (target_call_history_range): Add argument.
1655         * record-btrace.c (record_btrace_call_history_range): Add 'self'
1656         argument.
1657         (record_btrace_call_history_from): Update.
1658
1659 2014-02-19  Tom Tromey  <tromey@redhat.com>
1660
1661         * target.h (struct target_ops) <to_call_history_from>: Add
1662         argument.
1663         * target.c (target_call_history_from): Add argument.
1664         * record-btrace.c (record_btrace_call_history_from): Add 'self'
1665         argument.
1666
1667 2014-02-19  Tom Tromey  <tromey@redhat.com>
1668
1669         * target.h (struct target_ops) <to_call_history>: Add argument.
1670         * target.c (target_call_history): Add argument.
1671         * record-btrace.c (record_btrace_call_history): Add 'self'
1672         argument.
1673
1674 2014-02-19  Tom Tromey  <tromey@redhat.com>
1675
1676         * target.h (struct target_ops) <to_insn_history_range>: Add
1677         argument.
1678         * target.c (target_insn_history_range): Add argument.
1679         * record-btrace.c (record_btrace_insn_history_range): Add 'self'
1680         argument.
1681         (record_btrace_insn_history_from): Update.
1682
1683 2014-02-19  Tom Tromey  <tromey@redhat.com>
1684
1685         * target.h (struct target_ops) <to_insn_history_from>: Add
1686         argument.
1687         * target.c (target_insn_history_from): Add argument.
1688         * record-btrace.c (record_btrace_insn_history_from): Add 'self'
1689         argument.
1690
1691 2014-02-19  Tom Tromey  <tromey@redhat.com>
1692
1693         * target.h (struct target_ops) <to_insn_history>: Add argument.
1694         * target.c (target_insn_history): Add argument.
1695         * record-btrace.c (record_btrace_insn_history): Add 'self'
1696         argument.
1697
1698 2014-02-19  Tom Tromey  <tromey@redhat.com>
1699
1700         * target.h (struct target_ops) <to_goto_record>: Add argument.
1701         * target.c (target_goto_record): Add argument.
1702         * record-full.c (record_full_goto): Add 'self' argument.
1703         * record-btrace.c (record_btrace_goto): Add 'self' argument.
1704
1705 2014-02-19  Tom Tromey  <tromey@redhat.com>
1706
1707         * target.h (struct target_ops) <to_goto_record_end>: Add argument.
1708         * target.c (target_goto_record_end): Add argument.
1709         * record-full.c (record_full_goto_end): Add 'self' argument.
1710         * record-btrace.c (record_btrace_goto_end): Add 'self' argument.
1711
1712 2014-02-19  Tom Tromey  <tromey@redhat.com>
1713
1714         * target.h (struct target_ops) <to_goto_record_begin>: Add
1715         argument.
1716         * target.c (target_goto_record_begin): Add argument.
1717         * record-full.c (record_full_goto_begin): Add 'self' argument.
1718         * record-btrace.c (record_btrace_goto_begin): Add 'self'
1719         argument.
1720
1721 2014-02-19  Tom Tromey  <tromey@redhat.com>
1722
1723         * target.h (struct target_ops) <to_record_is_replaying>: Add
1724         argument.
1725         * target.c (target_record_is_replaying): Add argument.
1726         * record-full.c (record_full_is_replaying): Add 'self' argument.
1727         * record-btrace.c (record_btrace_is_replaying): Add 'self'
1728         argument.
1729         (record_btrace_xfer_partial, record_btrace_store_registers)
1730         (record_btrace_prepare_to_store, record_btrace_resume)
1731         (record_btrace_wait, record_btrace_decr_pc_after_break)
1732         (record_btrace_find_new_threads, record_btrace_thread_alive):
1733         Update.
1734
1735 2014-02-19  Tom Tromey  <tromey@redhat.com>
1736
1737         * target.h (struct target_ops) <to_delete_record>: Add argument.
1738         * target.c (target_delete_record): Add argument.
1739         * record-full.c (record_full_delete): Add 'self' argument.
1740
1741 2014-02-19  Tom Tromey  <tromey@redhat.com>
1742
1743         * target.h (struct target_ops) <to_save_record>: Add argument.
1744         * target.c (target_save_record): Add argument.
1745         * record-full.c (record_full_save): Add 'self' argument.
1746         (record_full_save): Add 'self' argument.
1747
1748 2014-02-19  Tom Tromey  <tromey@redhat.com>
1749
1750         * target.h (struct target_ops) <to_info_record>: Add argument.
1751         * target.c (target_info_record): Add argument.
1752         * record.c (info_record_command): Add argument.
1753         * record-full.c (record_full_info): Add 'self' argument.
1754         * record-btrace.c (record_btrace_info): Add 'self' argument.
1755
1756 2014-02-19  Tom Tromey  <tromey@redhat.com>
1757
1758         * target.h (struct target_ops) <to_stop_recording>: Add argument.
1759         * target.c (target_stop_recording): Add argument.
1760         * record.c (record_stop): Add argument.
1761         * record-btrace.c (record_btrace_stop_recording): Add 'self'
1762         argument.
1763
1764 2014-02-19  Tom Tromey  <tromey@redhat.com>
1765
1766         * target.h (struct target_ops) <to_read_btrace>: Add argument.
1767         * target.c (struct target_ops) <to_read_btrace>: Add argument.
1768         * remote.c (struct target_ops) <to_read_btrace>: Add 'self'
1769         argument.
1770         * amd64-linux-nat.c (amd64_linux_read_btrace): New function.
1771         (_initialize_amd64_linux_nat): Use it.
1772         * i386-linux-nat.c (i386_linux_read_btrace): New function.
1773         (_initialize_i386_linux_nat): Use it.
1774
1775 2014-02-19  Tom Tromey  <tromey@redhat.com>
1776
1777         * target.h (struct target_ops) <to_teardown_btrace>: Add argument.
1778         * target.c (target_teardown_btrace): Add argument.
1779         * remote.c (remote_teardown_btrace): Add 'self' argument.
1780         * i386-linux-nat.c (i386_linux_teardown_btrace): Add 'self'
1781         argument.
1782         * amd64-linux-nat.c (amd64_linux_teardown_btrace): Add 'self'
1783         argument.
1784
1785 2014-02-19  Tom Tromey  <tromey@redhat.com>
1786
1787         * target.h (struct target_ops) <to_disable_btrace>: Add argument.
1788         * target.c (target_disable_btrace): Add argument.
1789         * remote.c (remote_disable_btrace): Add 'self' argument.
1790         * i386-linux-nat.c (i386_linux_disable_btrace): Add 'self'
1791         argument.
1792         * amd64-linux-nat.c (amd64_linux_disable_btrace): Add 'self'
1793         argument.
1794
1795 2014-02-19  Tom Tromey  <tromey@redhat.com>
1796
1797         * target.h (struct target_ops) <to_enable_btrace>: Add argument.
1798         * target.c (target_enable_btrace): Add argument.
1799         * remote.c (remote_enable_btrace): Add 'self' argument.
1800         * i386-linux-nat.c (i386_linux_enable_btrace): Add 'self'
1801         argument.
1802         * amd64-linux-nat.c (amd64_linux_enable_btrace): Add 'self'
1803         argument.
1804
1805 2014-02-19  Tom Tromey  <tromey@redhat.com>
1806
1807         * target.h (struct target_ops) <to_can_use_agent>: Add argument.
1808         (target_can_use_agent): Add argument.
1809         * target.c (update_current_target): Update.
1810         * remote.c (remote_can_use_agent): Add 'self' argument.
1811         * inf-child.c (inf_child_can_use_agent): Add 'self' argument.
1812
1813 2014-02-19  Tom Tromey  <tromey@redhat.com>
1814
1815         * target.h (struct target_ops) <to_use_agent>: Add argument.
1816         (target_use_agent): Add argument.
1817         * target.c (update_current_target): Update.
1818         * remote.c (remote_use_agent): Add 'self' argument.
1819         * inf-child.c (inf_child_use_agent): Add 'self' argument.
1820
1821 2014-02-19  Tom Tromey  <tromey@redhat.com>
1822
1823         * tracepoint.c (tfile_traceframe_info): Add 'self' argument.
1824         * target.h (struct target_ops) <to_traceframe_info>: Add argument.
1825         (target_traceframe_info): Add argument.
1826         * target.c (update_current_target): Update.
1827         * remote.c (remote_traceframe_info): Add 'self' argument.
1828         * ctf.c (ctf_traceframe_info): Add 'self' argument.
1829
1830 2014-02-19  Tom Tromey  <tromey@redhat.com>
1831
1832         * target.h (target_static_tracepoint_markers_by_strid): Add
1833         argument.
1834         (struct target_ops) <to_static_tracepoint_markers_by_strid>: Add
1835         'self' argument.
1836         * target.c (update_current_target): Update.
1837         * remote.c (struct target_ops)
1838         <to_static_tracepoint_markers_by_strid>: Add 'self' argument.
1839         * linux-nat.c (struct target_ops)
1840         <to_static_tracepoint_markers_by_strid>: Add 'self' argument.
1841
1842 2014-02-19  Tom Tromey  <tromey@redhat.com>
1843
1844         * target.h (struct target_ops) <to_static_tracepoint_marker_at>:
1845         Add argument.
1846         (target_static_tracepoint_marker_at): Add argument.
1847         * target.c (update_current_target): Update.
1848         * remote.c (remote_static_tracepoint_marker_at): Add 'self'
1849         argument.
1850
1851 2014-02-19  Tom Tromey  <tromey@redhat.com>
1852
1853         * target.h (struct target_ops) <to_set_permissions>: Add argument.
1854         (target_set_permissions): Add argument.
1855         * target.c (update_current_target): Update.
1856         * remote.c (remote_set_permissions): Add 'self' argument.
1857         (remote_start_remote): Update.
1858
1859 2014-02-19  Tom Tromey  <tromey@redhat.com>
1860
1861         * windows-nat.c (windows_get_tib_address): Add 'self' argument.
1862         * target.h (struct target_ops) <to_get_tib_address>: Add argument.
1863         (target_get_tib_address): Add argument.
1864         * target.c (update_current_target): Update.
1865         * remote.c (remote_get_tib_address): Add 'self' argument.
1866
1867 2014-02-19  Tom Tromey  <tromey@redhat.com>
1868
1869         * target.h (struct target_ops) <to_set_trace_notes>: Add argument.
1870         (target_set_trace_notes): Add argument.
1871         * target.c (update_current_target): Update.
1872         * remote.c (remote_set_trace_notes): Add 'self' argument.
1873
1874 2014-02-19  Tom Tromey  <tromey@redhat.com>
1875
1876         * target.h (struct target_ops) <to_set_trace_buffer_size>: Add
1877         argument.
1878         (target_set_trace_buffer_size): Add argument.
1879         * target.c (update_current_target): Update.
1880         * remote.c (remote_set_trace_buffer_size): Add 'self' argument.
1881
1882 2014-02-19  Tom Tromey  <tromey@redhat.com>
1883
1884         * target.h (struct target_ops) <to_set_circular_trace_buffer>: Add
1885         argument.
1886         (target_set_circular_trace_buffer): Add argument.
1887         * target.c (update_current_target): Update.
1888         * remote.c (remote_set_circular_trace_buffer): Add 'self'
1889         argument.
1890
1891 2014-02-19  Tom Tromey  <tromey@redhat.com>
1892
1893         * target.h (struct target_ops) <to_set_disconnected_tracing>: Add
1894         argument.
1895         (target_set_disconnected_tracing): Add argument.
1896         * target.c (update_current_target): Update.
1897         * remote.c (remote_set_disconnected_tracing): Add 'self' argument.
1898
1899 2014-02-19  Tom Tromey  <tromey@redhat.com>
1900
1901         * target.h (struct target_ops)
1902         <to_get_min_fast_tracepoint_insn_len>: Add argument.
1903         (target_get_min_fast_tracepoint_insn_len): Add argument.
1904         * target.c (update_current_target): Update.
1905         * remote.c (remote_get_min_fast_tracepoint_insn_len): Add 'self'
1906         argument.
1907
1908 2014-02-19  Tom Tromey  <tromey@redhat.com>
1909
1910         * target.h (struct target_ops) <to_get_raw_trace_data>: Add
1911         argument.
1912         (target_get_raw_trace_data): Add argument.
1913         * target.c (update_current_target): Update.
1914         * remote.c (remote_get_raw_trace_data): Add 'self' argument.
1915
1916 2014-02-19  Tom Tromey  <tromey@redhat.com>
1917
1918         * target.h (struct target_ops) <to_upload_trace_state_variables>:
1919         Add argument.
1920         (target_upload_trace_state_variables): Add argument.
1921         * target.c (update_current_target): Update.
1922         * remote.c (remote_upload_trace_state_variables): Add 'self'
1923         argument.
1924         (remote_start_remote): Update.
1925
1926 2014-02-19  Tom Tromey  <tromey@redhat.com>
1927
1928         * target.h (struct target_ops) <to_upload_tracepoints>: Add
1929         argument.
1930         (target_upload_tracepoints): Add argument.
1931         * target.c (update_current_target): Update.
1932         * remote.c (remote_upload_tracepoints): Add 'self' argument.
1933         (remote_start_remote): Update.
1934
1935 2014-02-19  Tom Tromey  <tromey@redhat.com>
1936
1937         * target.h (struct target_ops) <to_save_trace_data>: Add argument.
1938         (target_save_trace_data): Add argument.
1939         * target.c (update_current_target): Update.
1940         * remote.c (remote_save_trace_data): Add 'self' argument.
1941
1942 2014-02-19  Tom Tromey  <tromey@redhat.com>
1943
1944         * tracepoint.c (tfile_get_trace_state_variable_value): Add 'self'
1945         argument.
1946         * target.h (struct target_ops)
1947         <to_get_trace_state_variable_value>: Add argument.
1948         (target_get_trace_state_variable_value): Add argument.
1949         * target.c (update_current_target): Update.
1950         * remote.c (remote_get_trace_state_variable_value): Add 'self'
1951         argument.
1952         * ctf.c (ctf_get_trace_state_variable_value): Add 'self' argument.
1953
1954 2014-02-19  Tom Tromey  <tromey@redhat.com>
1955
1956         * tracepoint.c (tfile_trace_find): Add 'self' argument.
1957         * target.h (struct target_ops) <to_trace_find>: Add argument.
1958         (target_trace_find): Add argument.
1959         * target.c (update_current_target): Update.
1960         * remote.c (remote_trace_find): Add 'self' argument.
1961         * ctf.c (ctf_trace_find): Add 'self' argument.
1962
1963 2014-02-19  Tom Tromey  <tromey@redhat.com>
1964
1965         * target.h (struct target_ops) <to_trace_stop>: Add argument.
1966         (target_trace_stop): Add argument.
1967         * target.c (update_current_target): Update.
1968         * remote.c (remote_trace_stop): Add 'self' argument.
1969
1970 2014-02-19  Tom Tromey  <tromey@redhat.com>
1971
1972         * tracepoint.c (tfile_get_tracepoint_status): Add 'self' argument.
1973         * target.h (struct target_ops) <to_get_tracepoint_status>: Add
1974         argument.
1975         (target_get_tracepoint_status): Add argument.
1976         * target.c (update_current_target): Update.
1977         * remote.c (remote_get_tracepoint_status): Add 'self' argument.
1978
1979 2014-02-19  Tom Tromey  <tromey@redhat.com>
1980
1981         * tracepoint.c (tfile_get_trace_status): Add 'self' argument.
1982         * target.h (struct target_ops) <to_get_trace_status>: Add
1983         argument.
1984         (target_get_trace_status): Add argument.
1985         * target.c (update_current_target): Update.
1986         * remote.c (remote_get_trace_status): Add 'self' argument.
1987         (remote_start_remote, remote_can_download_tracepoint): Update.
1988         * ctf.c (ctf_get_trace_status): Add 'self' argument.
1989
1990 2014-02-19  Tom Tromey  <tromey@redhat.com>
1991
1992         * target.h (struct target_ops) <to_trace_start>: Add argument.
1993         (target_trace_start): Add argument.
1994         * target.c (update_current_target): Update.
1995         * remote.c (remote_trace_start): Add 'self' argument.
1996
1997 2014-02-19  Tom Tromey  <tromey@redhat.com>
1998
1999         * target.h (struct target_ops) <to_trace_set_readonly_regions>:
2000         Add argument.
2001         (target_trace_set_readonly_regions): Add argument.
2002         * target.c (update_current_target): Update.
2003         * remote.c (remote_trace_set_readonly_regions): Add 'self'
2004         argument.
2005
2006 2014-02-19  Tom Tromey  <tromey@redhat.com>
2007
2008         * target.h (struct target_ops) <to_disable_tracepoint>: Add
2009         argument.
2010         (target_disable_tracepoint): Add argument.
2011         * target.c (update_current_target): Update.
2012         * remote.c (remote_disable_tracepoint): Add 'self' argument.
2013
2014 2014-02-19  Tom Tromey  <tromey@redhat.com>
2015
2016         * target.h (struct target_ops) <to_enable_tracepoint>: Add
2017         argument.
2018         (target_enable_tracepoint): Add argument.
2019         * target.c (update_current_target): Update.
2020         * remote.c (remote_enable_tracepoint): Add 'self' argument.
2021
2022 2014-02-19  Tom Tromey  <tromey@redhat.com>
2023
2024         * target.h (struct target_ops) <to_download_trace_state_variable>:
2025         Add argument.
2026         (target_download_trace_state_variable): Add argument.
2027         * target.c (update_current_target): Update.
2028         * remote.c (remote_download_trace_state_variable): Add 'self'
2029         argument.
2030
2031 2014-02-19  Tom Tromey  <tromey@redhat.com>
2032
2033         * target.h (struct target_ops) <to_can_download_tracepoint>: Add
2034         argument.
2035         (target_can_download_tracepoint): Add argument.
2036         * target.c (update_current_target): Update.
2037         * remote.c (remote_can_download_tracepoint): Add 'self' argument.
2038
2039 2014-02-19  Tom Tromey  <tromey@redhat.com>
2040
2041         * target.h (struct target_ops) <to_download_tracepoint>: Add
2042         argument.
2043         (target_download_tracepoint): Add argument.
2044         * target.c (update_current_target): Update.
2045         * remote.c (remote_download_tracepoint): Add 'self' argument.
2046
2047 2014-02-19  Tom Tromey  <tromey@redhat.com>
2048
2049         * target.h (struct target_ops) <to_trace_init>: Add argument.
2050         (target_trace_init): Add argument.
2051         * target.c (update_current_target): Update.
2052         * remote.c (remote_trace_init): Add 'self' argument.
2053
2054 2014-02-19  Tom Tromey  <tromey@redhat.com>
2055
2056         * target.h (struct target_ops) <to_fileio_readlink>: Add argument.
2057         * target.c (target_fileio_readlink): Add argument.
2058         * remote.c (remote_hostio_readlink): Add 'self' argument.
2059         * inf-child.c (inf_child_fileio_readlink): Add 'self' argument.
2060
2061 2014-02-19  Tom Tromey  <tromey@redhat.com>
2062
2063         * target.h (struct target_ops) <to_fileio_unlink>: Add argument.
2064         * target.c (target_fileio_unlink): Add argument.
2065         * remote.c (remote_hostio_unlink): Add 'self' argument.
2066         (remote_file_delete): Update.
2067         * inf-child.c (inf_child_fileio_unlink): Add 'self' argument.
2068
2069 2014-02-19  Tom Tromey  <tromey@redhat.com>
2070
2071         * target.h (struct target_ops) <to_fileio_close>: Add argument.
2072         * target.c (target_fileio_close): Add argument.
2073         * remote.c (remote_hostio_close): Add 'self' argument.
2074         (remote_hostio_close_cleanup): Update.
2075         (remote_bfd_iovec_close, remote_file_put, remote_file_get):
2076         Update.
2077         * inf-child.c (inf_child_fileio_close): Add 'self' argument.
2078
2079 2014-02-19  Tom Tromey  <tromey@redhat.com>
2080
2081         * target.h (struct target_ops) <to_fileio_pread>: Add argument.
2082         * target.c (target_fileio_pread): Add argument.
2083         * remote.c (remote_hostio_pread): Add 'self' argument.
2084         (remote_bfd_iovec_pread, remote_file_get): Update.
2085         * inf-child.c (inf_child_fileio_pread): Add 'self' argument.
2086
2087 2014-02-19  Tom Tromey  <tromey@redhat.com>
2088
2089         * target.h (struct target_ops) <to_fileio_pwrite>: Add argument.
2090         * target.c (target_fileio_pwrite): Add argument.
2091         * remote.c (remote_hostio_pwrite): Add 'self' argument.
2092         (remote_file_put): Update.
2093         * inf-child.c (inf_child_fileio_pwrite): Add 'self' argument.
2094
2095 2014-02-19  Tom Tromey  <tromey@redhat.com>
2096
2097         * target.h (struct target_ops) <to_fileio_open>: Add argument.
2098         * target.c (target_fileio_open): Add argument.
2099         * remote.c (remote_hostio_open): Add 'self' argument.
2100         (remote_bfd_iovec_open): Add 'self' argument.
2101         (remote_file_put): Add 'self' argument.
2102         (remote_file_get): Add 'self' argument.
2103         * inf-child.c (inf_child_fileio_open): Add 'self' argument.
2104
2105 2014-02-19  Tom Tromey  <tromey@redhat.com>
2106
2107         * target.h (struct target_ops) <to_can_run_breakpoint_commands>:
2108         Add argument.
2109         (target_can_run_breakpoint_commands): Add argument.
2110         * target.c (update_current_target): Update.
2111         * remote.c (remote_can_run_breakpoint_commands): Add 'self'
2112         argument.
2113         (remote_insert_breakpoint): Add 'self' argument.
2114         (remote_insert_hw_breakpoint): Add 'self' argument.
2115         (remote_can_run_breakpoint_commands): Add 'self' argument.
2116
2117 2014-02-19  Tom Tromey  <tromey@redhat.com>
2118
2119         * target.h (struct target_ops)
2120         <to_supports_evaluation_of_breakpoint_conditions>: Add argument.
2121         (target_supports_evaluation_of_breakpoint_conditions): Add
2122         argument.
2123         * target.c (update_current_target): Update.
2124         * remote.c (remote_supports_cond_breakpoints): Add 'self'
2125         argument.
2126         (remote_insert_breakpoint): Add 'self' argument.
2127         (remote_insert_hw_breakpoint): Add 'self' argument.
2128         (remote_supports_cond_breakpoints): Add 'self' argument.
2129
2130 2014-02-19  Tom Tromey  <tromey@redhat.com>
2131
2132         * target.h (struct target_ops) <to_supports_string_tracing>: Add
2133         argument.
2134         (target_supports_string_tracing): Add argument.
2135         * target.c (update_current_target): Update.
2136         * remote.c (remote_supports_string_tracing): Add 'self' argument.
2137
2138 2014-02-19  Tom Tromey  <tromey@redhat.com>
2139
2140         * target.h (struct target_ops)
2141         <to_supports_disable_randomization>: Add argument.
2142         * target.c (find_default_supports_disable_randomization): Add
2143         argument.
2144         (target_supports_disable_randomization): Add argument.
2145         (find_default_supports_disable_randomization): Add 'self'
2146         argument.
2147         * remote.c (extended_remote_supports_disable_randomization): Add
2148         'self' argument.
2149         (remote_supports_disable_randomization): Add 'self' argument.
2150         (extended_remote_create_inferior): Update.
2151         * linux-nat.c (linux_nat_supports_disable_randomization): Add
2152         'self' argument.
2153
2154 2014-02-19  Tom Tromey  <tromey@redhat.com>
2155
2156         * target.h (struct target_ops)
2157         <to_supports_enable_disable_tracepoint>: Add argument.
2158         (target_supports_enable_disable_tracepoint): Add argument.
2159         * target.c (update_current_target): Update.
2160         * remote.c (remote_supports_enable_disable_tracepoint): Add 'self'
2161         argument.
2162
2163 2014-02-19  Tom Tromey  <tromey@redhat.com>
2164
2165         * target.h (struct target_ops) <to_supports_multi_process>: Add
2166         argument.
2167         (target_supports_multi_process): Add argument.
2168         * target.c (update_current_target): Update.
2169         * remote.c (remote_supports_multi_process): Add 'self' argument.
2170         * linux-nat.c (linux_nat_supports_multi_process): Add 'self'
2171         argument.
2172         * darwin-nat.c (darwin_supports_multi_process): Add 'self'
2173         argument.
2174
2175 2014-02-19  Tom Tromey  <tromey@redhat.com>
2176
2177         * target.h (struct target_ops) <to_execution_direction>: Add
2178         argument.
2179         (target_execution_direction): Add argument.
2180         * target.c (default_execution_direction): Add 'self' argument.
2181         * record-full.c (record_full_execution_direction): Add 'self'
2182         argument.
2183
2184 2014-02-19  Tom Tromey  <tromey@redhat.com>
2185
2186         * target.h (struct target_ops) <to_can_execute_reverse>: Add
2187         argument.
2188         (target_can_execute_reverse): Add argument.
2189         * remote.c (remote_can_execute_reverse): Add 'self' argument.
2190         * record-full.c (record_full_can_execute_reverse): Add 'self'
2191         argument.
2192         * record-btrace.c (record_btrace_can_execute_reverse): Add 'self'
2193         argument.
2194
2195 2014-02-19  Tom Tromey  <tromey@redhat.com>
2196
2197         * windows-nat.c (windows_get_ada_task_ptid): Add 'self' argument.
2198         * target.h (struct target_ops) <to_get_ada_task_ptid>: Add
2199         argument.
2200         (target_get_ada_task_ptid): Add argument.
2201         * target.c (update_current_target): Update.
2202         (default_get_ada_task_ptid): Add 'self' argument.
2203         * sol-thread.c (sol_get_ada_task_ptid): Add 'self' argument.
2204         * remote.c (remote_get_ada_task_ptid): Add 'self' argument.
2205         * ravenscar-thread.c (ravenscar_get_ada_task_ptid): Add 'self'
2206         argument.
2207         * linux-thread-db.c (thread_db_get_ada_task_ptid): Add 'self'
2208         argument.
2209         * inf-ttrace.c (inf_ttrace_get_ada_task_ptid): Add 'self'
2210         argument.
2211         * dec-thread.c (dec_thread_get_ada_task_ptid): Add 'self'
2212         argument.
2213         * darwin-nat.c (darwin_get_ada_task_ptid): Add 'self' argument.
2214         * aix-thread.c (aix_thread_get_ada_task_ptid): Add 'self'
2215         argument.
2216
2217 2014-02-19  Tom Tromey  <tromey@redhat.com>
2218
2219         * target.h (struct target_ops) <to_goto_bookmark>: Add argument.
2220         (target_goto_bookmark): Add argument.
2221         * target.c (dummy_goto_bookmark): Add 'self' argument.
2222         * record-full.c (record_full_goto_bookmark): Add 'self' argument.
2223
2224 2014-02-19  Tom Tromey  <tromey@redhat.com>
2225
2226         * target.h (struct target_ops) <to_get_bookmark>: Add argument.
2227         (target_get_bookmark): Add argument.
2228         * target.c (dummy_get_bookmark): Add 'self' argument.
2229         * record-full.c (record_full_get_bookmark): Add 'self' argument.
2230
2231 2014-02-19  Tom Tromey  <tromey@redhat.com>
2232
2233         * target.h (struct target_ops) <to_make_corefile_notes>: Add
2234         argument.
2235         (target_make_corefile_notes): Add argument.
2236         * target.c (dummy_make_corefile_notes): Add 'self' argument.
2237         * procfs.c (procfs_make_note_section): Add 'self' argument.
2238         (procfs_make_note_section): Add 'self' argument.
2239         (procfs_make_note_section): Add 'self' argument.
2240         * linux-nat.c (linux_nat_make_corefile_notes): Add 'self'
2241         argument.
2242         * fbsd-nat.h (fbsd_make_corefile_notes): Add 'self' argument.
2243         * fbsd-nat.c (fbsd_make_corefile_notes): Add 'self' argument.
2244         * exec.c (exec_make_note_section): Add 'self' argument.
2245         (exec_make_note_section): Add 'self' argument.
2246
2247 2014-02-19  Tom Tromey  <tromey@redhat.com>
2248
2249         * target.h (struct target_ops) <to_find_memory_regions>: Add
2250         argument.
2251         (target_find_memory_regions): Add argument.
2252         * target.c (dummy_find_memory_regions): Add 'self' argument.
2253         * procfs.c (proc_find_memory_regions): Add 'self' argument.
2254         * gnu-nat.c (gnu_find_memory_regions): Add 'self' argument.
2255         * fbsd-nat.h (fbsd_find_memory_regions): Add 'self' argument.
2256         * fbsd-nat.c (fbsd_find_memory_regions): Add 'self' argument.
2257         * exec. (exec_do_find_memory_regions): New global.
2258         (exec_set_find_memory_regions): Rewrite.
2259         (exec_find_memory_regions): New function.
2260         (init_exec_ops): Use exec_find_memory_regions.
2261
2262 2014-02-19  Tom Tromey  <tromey@redhat.com>
2263
2264         * target.h (struct target_ops) <to_supports_non_stop>: Add
2265         argument.
2266         * target.c (find_default_supports_non_stop): Add argument.
2267         (target_supports_non_stop): Add argument.
2268         (find_default_supports_non_stop): Add 'self' argument.
2269         * remote.c (remote_supports_non_stop): Add 'self' argument.
2270         * linux-nat.c (linux_nat_supports_non_stop): Add 'self' argument.
2271
2272 2014-02-19  Tom Tromey  <tromey@redhat.com>
2273
2274         * target.h (struct target_ops) <to_log_command>: Add argument.
2275         (target_log_command): Add argument.
2276         * serial.h (serial_log_command): Add 'self' argument.
2277         * serial.c (serial_log_command): Add 'self' argument.
2278
2279 2014-02-19  Tom Tromey  <tromey@redhat.com>
2280
2281         * windows-nat.c (windows_pid_to_exec_file): Add 'self' argument.
2282         * target.h (struct target_ops) <to_pid_to_exec_file>: Add
2283         argument.
2284         (target_pid_to_exec_file): Add argument.
2285         * target.c (debug_to_pid_to_exec_file): Add argument.
2286         (update_current_target): Update.
2287         * nbsd-nat.h (nbsd_pid_to_exec_file): Add 'self' argument.
2288         * nbsd-nat.c (nbsd_pid_to_exec_file): Add 'self' argument.
2289         * linux-nat.c (linux_child_pid_to_exec_file): Add 'self' argument.
2290         (linux_handle_extended_wait): Update.
2291         * inf-child.c (inf_child_pid_to_exec_file): Add 'self' argument.
2292         * fbsd-nat.h (fbsd_pid_to_exec_file): Add 'self' argument.
2293         * fbsd-nat.c (fbsd_pid_to_exec_file): Add 'self' argument.
2294         * darwin-nat.c (darwin_pid_to_exec_file): Add 'self' argument.
2295
2296 2014-02-19  Tom Tromey  <tromey@redhat.com>
2297
2298         * target.h (struct target_ops) <to_rcmd>: Add argument.
2299         (target_rcmd): Add argument.
2300         * target.c (debug_to_rcmd): Add argument.
2301         (update_current_target, do_monitor_command): Update.
2302         * remote.c (remote_rcmd): Add 'self' argument.
2303         * monitor.c (monitor_rcmd): Add 'self' argument.
2304
2305 2014-02-19  Tom Tromey  <tromey@redhat.com>
2306
2307         * windows-nat.c (windows_stop): Add 'self' argument.
2308         * target.h (struct target_ops) <to_stop>: Add argument.
2309         * target.c (target_stop): Add argument.
2310         (debug_to_stop): Add argument.
2311         (update_current_target): Update.
2312         * remote.c (remote_stop): Add 'self' argument.
2313         * remote-sim.c (gdbsim_stop): Add 'self' argument.
2314         (gdbsim_cntrl_c): Update.
2315         * remote-m32r-sdi.c (m32r_stop): Add 'self' argument.
2316         * procfs.c (procfs_stop): Add 'self' argument.
2317         * nto-procfs.c (procfs_stop): Add 'self' argument.
2318         * monitor.c (monitor_stop): Add 'self' argument.
2319         (monitor_open): Update.
2320         * linux-nat.c (linux_nat_stop): Add argument.
2321         * inf-ptrace.c (inf_ptrace_stop): Add 'self' argument.
2322         * gnu-nat.c (gnu_stop): Add 'self' argument.
2323         * darwin-nat.c (darwin_stop): Add 'self' argument.
2324
2325 2014-02-19  Tom Tromey  <tromey@redhat.com>
2326
2327         * target.h (struct target_ops) <to_thread_name>: Add argument.
2328         * target.c (target_thread_name): Add argument.
2329         (update_current_target): Update.
2330         * linux-nat.c (linux_nat_thread_name): Add 'self' argument.
2331
2332 2014-02-19  Tom Tromey  <tromey@redhat.com>
2333
2334         * target.h (struct target_ops) <to_extra_thread_info>: Add
2335         argument.
2336         (target_extra_thread_info): Add argument.
2337         * target.c (update_current_target): Update.
2338         * remote.c (remote_threads_extra_info): Add 'self' argument.
2339         * ravenscar-thread.c (ravenscar_extra_thread_info): Add 'self'
2340         argument.
2341         * nto-tdep.h (nto_extra_thread_info): Add 'self' argument.
2342         * nto-tdep.c (nto_extra_thread_info): Add 'self' argument.
2343         * linux-thread-db.c (thread_db_extra_thread_info): Add 'self'
2344         argument.
2345         * inf-ttrace.c (inf_ttrace_extra_thread_info): Add 'self'
2346         argument.
2347         * bsd-uthread.c (bsd_uthread_extra_thread_info): Add 'self'
2348         argument.
2349         * aix-thread.c (aix_thread_extra_thread_info): Add 'self'
2350         argument.
2351
2352 2014-02-19  Tom Tromey  <tromey@redhat.com>
2353
2354         * target.h (struct target_ops) <to_program_signals>: Add argument.
2355         * target.c (target_program_signals): Add argument.
2356         * remote.c (remote_program_signals): Add 'self' argument.
2357
2358 2014-02-19  Tom Tromey  <tromey@redhat.com>
2359
2360         * target.h (struct target_ops) <to_pass_signals>: Add argument.
2361         * target.c (target_pass_signals): Add argument.
2362         * remote.c (remote_pass_signals): Add 'self' argument.
2363         (remote_start_remote): Update.
2364         * procfs.c (procfs_pass_signals): Add 'self' argument.
2365         * nto-procfs.c (procfs_pass_signals): Add 'self' argument.
2366         * linux-nat.c (linux_nat_pass_signals): Add 'self' argument.
2367         (linux_nat_create_inferior, linux_nat_attach): Update.
2368
2369 2014-02-19  Tom Tromey  <tromey@redhat.com>
2370
2371         * windows-nat.c (windows_can_run): Add 'self' argument.
2372         * target.h (struct target_ops) <to_can_run>: Add argument.
2373         (target_can_run): Add argument.
2374         * target.c (debug_to_can_run): Add argument.
2375         (update_current_target): Update.
2376         * nto-procfs.c (procfs_can_run): Add 'self' argument.
2377         * inf-child.c (inf_child_can_run): Add 'self' argument.
2378         * go32-nat.c (go32_can_run): Add 'self' argument.
2379
2380 2014-02-19  Tom Tromey  <tromey@redhat.com>
2381
2382         * target.h (struct target_ops) <to_has_exited>: Add argument.
2383         (target_has_exited): Add argument.
2384         * target.c (debug_to_has_exited): Add argument.
2385         (update_current_target): Update.
2386
2387 2014-02-19  Tom Tromey  <tromey@redhat.com>
2388
2389         * target.h (struct target_ops) <to_set_syscall_catchpoint>: Add
2390         argument.
2391         (target_set_syscall_catchpoint): Add argument.
2392         * linux-nat.c (linux_child_set_syscall_catchpoint): Add 'self'
2393         argument.
2394         * target.c (update_current_target): Update.
2395
2396 2014-02-19  Tom Tromey  <tromey@redhat.com>
2397
2398         * target.h (struct target_ops) <to_remove_exec_catchpoint>: Add
2399         argument.
2400         (target_remove_exec_catchpoint): Add argument.
2401         * target.c (debug_to_remove_exec_catchpoint): Add argument.
2402         (update_current_target): Update.
2403         * linux-nat.c (linux_child_remove_exec_catchpoint): Add 'self'
2404         argument.
2405
2406 2014-02-19  Tom Tromey  <tromey@redhat.com>
2407
2408         * target.h (struct target_ops) <to_insert_exec_catchpoint>: Add
2409         argument.
2410         (target_insert_exec_catchpoint): Add argument.
2411         * target.c (debug_to_insert_exec_catchpoint): Add argument.
2412         (update_current_target): Update.
2413         * linux-nat.c (linux_child_insert_exec_catchpoint): Add 'self'
2414         argument.
2415
2416 2014-02-19  Tom Tromey  <tromey@redhat.com>
2417
2418         * target.h (struct target_ops) <to_remove_vfork_catchpoint>: Add
2419         argument.
2420         (target_remove_vfork_catchpoint): Add argument.
2421         * target.c (debug_to_remove_vfork_catchpoint): Add argument.
2422         (update_current_target): Update.
2423         * linux-nat.c (linux_child_remove_vfork_catchpoint): Add 'self'
2424         argument.
2425
2426 2014-02-19  Tom Tromey  <tromey@redhat.com>
2427
2428         * target.h (struct target_ops) <to_insert_vfork_catchpoint>: Add
2429         argument.
2430         (target_insert_vfork_catchpoint): Add argument.
2431         * target.c (debug_to_insert_vfork_catchpoint): Add argument.
2432         (update_current_target): Update.
2433         * linux-nat.c (linux_child_insert_vfork_catchpoint): Add 'self'
2434         argument.
2435
2436 2014-02-19  Tom Tromey  <tromey@redhat.com>
2437
2438         * target.h (struct target_ops) <to_remove_fork_catchpoint>: Add
2439         argument.
2440         (target_remove_fork_catchpoint): Add argument.
2441         * target.c (debug_to_remove_fork_catchpoint): Add argument.
2442         (update_current_target): Update.
2443         * linux-nat.c (linux_child_remove_fork_catchpoint): Add 'self'
2444         argument.
2445
2446 2014-02-19  Tom Tromey  <tromey@redhat.com>
2447
2448         * target.h (struct target_ops) <to_insert_fork_catchpoint>: Add
2449         argument.
2450         (target_insert_fork_catchpoint): Add argument.
2451         * target.c (debug_to_insert_fork_catchpoint): Add argument.
2452         (update_current_target): Update.
2453         * linux-nat.c (linux_child_insert_fork_catchpoint): Add 'self'
2454         argument.
2455
2456 2014-02-19  Tom Tromey  <tromey@redhat.com>
2457
2458         * target.h (struct target_ops) <to_post_startup_inferior>: Add
2459         argument.
2460         (target_post_startup_inferior): Add argument.
2461         * target.c (debug_to_post_startup_inferior): Add argument.
2462         (update_current_target): Update.
2463         * spu-linux-nat.c (spu_child_post_startup_inferior): Add 'self'
2464         argument.
2465         * linux-nat.c (linux_child_post_startup_inferior): Add 'self'
2466         argument.
2467         * inf-ptrace.c (inf_ptrace_post_startup_inferior): Add 'self'
2468         argument.
2469         * inf-child.c (inf_child_post_startup_inferior): Add 'self'
2470         argument.
2471         * i386-linux-nat.c (i386_linux_child_post_startup_inferior): Add
2472         'self' argument.
2473         (super_post_startup_inferior): Likewise.
2474         * amd64-linux-nat.c (amd64_linux_child_post_startup_inferior): Add
2475         'self' argument.
2476         (super_post_startup_inferior): Likewise.
2477         * aarch64-linux-nat.c (aarch64_linux_child_post_startup_inferior):
2478         Add 'self' argument.
2479         (super_post_startup_inferior): Likewise.
2480
2481 2014-02-19  Tom Tromey  <tromey@redhat.com>
2482
2483         * target.h (struct target_ops) <to_load>: Add argument.
2484         * target.c (target_load): Add argument.
2485         (debug_to_load): Add argument.
2486         (update_current_target): Update.
2487         * remote.c (remote_load): Add 'self' argument.
2488         * remote-sim.c (gdbsim_load): Add 'self' argument.
2489         * remote-mips.c (mips_load): Add 'self' argument.
2490         * remote-m32r-sdi.c (m32r_load): Add 'self' argument.
2491         * monitor.c (monitor_load): Add 'self' argument.
2492         * m32r-rom.c (m32r_load_gen): Add 'self' argument.
2493
2494 2014-02-19  Tom Tromey  <tromey@redhat.com>
2495
2496         * target.h (struct target_ops) <to_terminal_info>: Add argument.
2497         (target_terminal_info): Add argument.
2498         * target.c (debug_to_terminal_info): Add argument.
2499         (default_terminal_info): Likewise.
2500         * inflow.c (child_terminal_info): Add 'self' argument.
2501         * inferior.h (child_terminal_info): Add 'self' argument.
2502         * go32-nat.c (go32_terminal_info): Add 'self' argument.
2503
2504 2014-02-19  Tom Tromey  <tromey@redhat.com>
2505
2506         * target.h (struct target_ops) <to_terminal_save_ours>: Add
2507         argument.
2508         (target_terminal_save_ours): Add argument.
2509         * target.c (debug_to_terminal_save_ours): Add argument.
2510         (update_current_target): Update.
2511         * inflow.c (terminal_save_ours): Add 'self' argument.
2512         * inferior.h (terminal_save_ours): Add 'self' argument.
2513
2514 2014-02-19  Tom Tromey  <tromey@redhat.com>
2515
2516         * target.h (struct target_ops) <to_terminal_ours>: Add argument.
2517         (target_terminal_ours): Add argument.
2518         * target.c (debug_to_terminal_ours): Add argument.
2519         (update_current_target): Update.
2520         * remote.c (remote_terminal_ours): Add 'self' argument.
2521         (remote_close): Update.
2522         * linux-nat.c (linux_nat_terminal_ours): Add 'self' argument.
2523         * inflow.c (terminal_ours): Add 'self' argument.
2524         * inferior.h (terminal_ours): Add 'self' argument.
2525         * go32-nat.c (go32_terminal_ours): Add 'self' argument.
2526
2527 2014-02-19  Pedro Alves  <palves@redhat.com>
2528             Tom Tromey  <tromey@redhat.com>
2529
2530         * target.h (struct target_ops) <to_terminal_ours_for_output>: Add
2531         argument.
2532         (target_terminal_ours_for_output): Add argument.
2533         * target.c (debug_to_terminal_ours_for_output): Add argument.
2534         (update_current_target): Update.
2535         * inflow.c (terminal_ours_for_output): Add 'self' argument.
2536         * inferior.h (terminal_ours_for_output): Add 'self' argument.
2537         * go32-nat.c (go32_terminal_ours): Add 'self' argument.
2538
2539 2014-02-19  Tom Tromey  <tromey@redhat.com>
2540
2541         * target.h (struct target_ops) <to_terminal_inferior>: Add
2542         argument.
2543         * target.c (target_terminal_inferior): Add argument.
2544         (update_current_target): Update.
2545         * remote.c (remote_terminal_inferior): Add 'self' argument.
2546         * linux-nat.c (linux_nat_terminal_inferior): Add 'self' argument.
2547         * inflow.c (terminal_inferior): Add 'self' argument.
2548         * inferior.h (terminal_inferior): Add 'self' argument.
2549         * go32-nat.c (go32_terminal_inferior): Add 'self' argument.
2550         (go32_terminal_inferior): Add 'self' argument.
2551
2552 2014-02-19  Tom Tromey  <tromey@redhat.com>
2553
2554         * target.h (struct target_ops) <to_terminal_init>: Add argument.
2555         (target_terminal_init): Add argument.
2556         * target.c (debug_to_terminal_init): Add argument.
2557         (update_current_target): Update.
2558         * inflow.c (terminal_init_inferior): Add 'self' argument.
2559         * inferior.h (terminal_init_inferior): Add 'self' argument.
2560         * go32-nat.c (go32_terminal_init): Add 'self' argument.
2561         * gnu-nat.c (gnu_terminal_init_inferior): Add 'self' argument.
2562
2563 2014-02-19  Tom Tromey  <tromey@redhat.com>
2564
2565         * target.h (struct target_ops)
2566         <to_can_accel_watchpoint_condition>: Add argument.
2567         (target_can_accel_watchpoint_condition): Add argument.
2568         * target.c (debug_to_can_accel_watchpoint_condition): Add
2569         argument.
2570         (update_current_target): Update.
2571         * ppc-linux-nat.c (ppc_linux_can_accel_watchpoint_condition): Add
2572         'self' argument.
2573
2574 2014-02-19  Tom Tromey  <tromey@redhat.com>
2575
2576         * target.h (struct target_ops) <to_region_ok_for_hw_watchpoint>:
2577         Add argument.
2578         (target_region_ok_for_hw_watchpoint): Add argument.
2579         * target.c (debug_to_region_ok_for_hw_watchpoint): Add argument.
2580         (default_region_ok_for_hw_watchpoint): Add argument.
2581         * spu-multiarch.c (spu_region_ok_for_hw_watchpoint): Add argument.
2582         * s390-linux-nat.c (s390_region_ok_for_hw_watchpoint): Add 'self'
2583         argument.
2584         * remote.c (remote_region_ok_for_hw_watchpoint): Add 'self'
2585         argument.
2586         * procfs.c (procfs_region_ok_for_hw_watchpoint): Add 'self'
2587         argument.
2588         * ppc-linux-nat.c (ppc_linux_region_ok_for_hw_watchpoint): Add
2589         'self' argument.
2590         * mips-linux-nat.c (mips_linux_region_ok_for_hw_watchpoint): Add
2591         'self' argument.
2592         * inf-ttrace.c (inf_ttrace_region_ok_for_hw_watchpoint): Add
2593         'self' argument.
2594         * i386-nat.c (i386_region_ok_for_watchpoint): Add 'self' argument.
2595         * arm-linux-nat.c (arm_linux_region_ok_for_hw_watchpoint): Add
2596         'self' argument.
2597         * aarch64-linux-nat.c (aarch64_linux_region_ok_for_hw_watchpoint):
2598         Add 'self' argument.
2599
2600 2014-02-19  Tom Tromey  <tromey@redhat.com>
2601
2602         * target.h (struct target_ops) <to_insert_watchpoint>: Add
2603         argument.
2604         (target_insert_watchpoint): Add argument.
2605         * target.c (debug_to_insert_watchpoint): Add argument.
2606         (update_current_target): Update.
2607         * s390-linux-nat.c (s390_insert_watchpoint): Add 'self' argument.
2608         * remote.c (remote_insert_watchpoint): Add 'self' argument.
2609         * remote-mips.c (mips_insert_watchpoint): Add 'self' argument.
2610         * remote-m32r-sdi.c (m32r_insert_watchpoint): Add 'self' argument.
2611         * procfs.c (procfs_insert_watchpoint): Add 'self' argument.
2612         * ppc-linux-nat.c (ppc_linux_insert_watchpoint): Add 'self'
2613         argument.
2614         * nto-procfs.c (procfs_insert_hw_watchpoint): Add 'self' argument.
2615         (procfs_insert_hw_watchpoint): Add 'self' argument.
2616         * mips-linux-nat.c (mips_linux_insert_watchpoint): Add 'self'
2617         argument.
2618         * inf-ttrace.c (inf_ttrace_insert_watchpoint): Add 'self'
2619         argument.
2620         * ia64-linux-nat.c (ia64_linux_insert_watchpoint): Add 'self'
2621         argument.
2622         * i386-nat.c (i386_insert_watchpoint): Add 'self' argument.
2623         * arm-linux-nat.c (arm_linux_insert_watchpoint): Add 'self'
2624         argument.
2625         * aarch64-linux-nat.c (aarch64_linux_insert_watchpoint): Add
2626         'self' argument.
2627
2628 2014-02-19  Tom Tromey  <tromey@redhat.com>
2629
2630         * target.h (struct target_ops) <to_remove_watchpoint>: Add
2631         argument.
2632         (target_remove_watchpoint): Add argument.
2633         * target.c (debug_to_remove_watchpoint): Add argument.
2634         (update_current_target): Update.
2635         * s390-linux-nat.c (s390_remove_watchpoint): Add 'self' argument.
2636         * remote.c (remote_remove_watchpoint): Add 'self' argument.
2637         * remote-mips.c (mips_remove_watchpoint): Add 'self' argument.
2638         * remote-m32r-sdi.c (m32r_remove_watchpoint): Add 'self' argument.
2639         * procfs.c (procfs_remove_watchpoint): Add 'self' argument.
2640         * ppc-linux-nat.c (ppc_linux_remove_watchpoint): Add 'self'
2641         argument.
2642         * nto-procfs.c (procfs_remove_hw_watchpoint): Add 'self' argument.
2643         * mips-linux-nat.c (mips_linux_remove_watchpoint): Add 'self'
2644         argument.
2645         * inf-ttrace.c (inf_ttrace_remove_watchpoint): Add 'self'
2646         argument.
2647         * ia64-linux-nat.c (ia64_linux_remove_watchpoint): Add 'self'
2648         argument.
2649         * i386-nat.c (i386_remove_watchpoint): Add 'self' argument.
2650         * arm-linux-nat.c (arm_linux_remove_watchpoint): Add 'self'
2651         argument.
2652         * aarch64-linux-nat.c (aarch64_linux_remove_watchpoint): Add
2653         'self' argument.
2654
2655 2014-02-19  Tom Tromey  <tromey@redhat.com>
2656
2657         * target.h (struct target_ops) <to_remove_hw_breakpoint>: Add
2658         argument.
2659         (target_remove_hw_breakpoint): Add argument.
2660         * target.c (debug_to_remove_hw_breakpoint): Add argument.
2661         (update_current_target): Update.
2662         * remote.c (remote_remove_hw_breakpoint): Add 'self' argument.
2663         * ppc-linux-nat.c (ppc_linux_remove_hw_breakpoint): Add 'self'
2664         argument.
2665         * i386-nat.c (i386_remove_hw_breakpoint): Add 'self' argument.
2666         * arm-linux-nat.c (arm_linux_remove_hw_breakpoint): Add 'self'
2667         argument.
2668         * aarch64-linux-nat.c (aarch64_linux_remove_hw_breakpoint): Add
2669         'self' argument.
2670
2671 2014-02-19  Tom Tromey  <tromey@redhat.com>
2672
2673         * target.h (struct target_ops) <to_insert_hw_breakpoint>: Add
2674         argument.
2675         (target_insert_hw_breakpoint): Add argument.
2676         * target.c (debug_to_insert_hw_breakpoint): Add argument.
2677         (update_current_target): Update.
2678         * remote.c (remote_insert_hw_breakpoint): Add 'self' argument.
2679         * ppc-linux-nat.c (ppc_linux_insert_hw_breakpoint): Add 'self'
2680         argument.
2681         * nto-procfs.c (procfs_insert_hw_breakpoint): Add 'self' argument.
2682         * i386-nat.c (i386_insert_hw_breakpoint): Add 'self' argument.
2683         * arm-linux-nat.c (arm_linux_insert_hw_breakpoint): Add 'self'
2684         argument.
2685         * aarch64-linux-nat.c (aarch64_linux_insert_hw_breakpoint): Add
2686         'self' argument.
2687
2688 2014-02-19  Tom Tromey  <tromey@redhat.com>
2689
2690         * target.h (struct target_ops) <to_can_use_hw_breakpoint>: Add
2691         argument.
2692         (target_can_use_hardware_watchpoint): Add argument.
2693         * target.c (debug_to_can_use_hw_breakpoint): Add argument.
2694         (update_current_target): Update.
2695         * spu-linux-nat.c (spu_can_use_hw_breakpoint): Add 'self'
2696         argument.
2697         * s390-linux-nat.c (s390_can_use_hw_breakpoint): Add 'self'
2698         argument.
2699         * remote.c (remote_check_watch_resources): Add 'self' argument.
2700         * remote-mips.c (mips_can_use_watchpoint): Add 'self' argument.
2701         * remote-m32r-sdi.c (m32r_can_use_hw_watchpoint): Add 'self'
2702         argument.
2703         * procfs.c (procfs_can_use_hw_breakpoint): Add 'self' argument.
2704         * ppc-linux-nat.c (ppc_linux_can_use_hw_breakpoint): Add 'self'
2705         argument.
2706         * nto-procfs.c (procfs_can_use_hw_breakpoint): Add 'self'
2707         argument.
2708         * mips-linux-nat.c (mips_linux_can_use_hw_breakpoint): Add 'self'
2709         argument.
2710         * inf-ttrace.c (inf_ttrace_can_use_hw_breakpoint): Add 'self'
2711         argument.
2712         * ia64-linux-nat.c (ia64_linux_can_use_hw_breakpoint): Add 'self'
2713         argument.
2714         * ia64-hpux-nat.c (ia64_hpux_can_use_hw_breakpoint): Add 'self'
2715         argument.
2716         * i386-nat.c (i386_can_use_hw_breakpoint): Add 'self' argument.
2717         * arm-linux-nat.c (arm_linux_can_use_hw_breakpoint): Add 'self'
2718         argument.
2719         * aarch64-linux-nat.c (aarch64_linux_can_use_hw_breakpoint): Add
2720         'self' argument.
2721
2722 2014-02-19  Tom Tromey  <tromey@redhat.com>
2723
2724         * target.h (struct target_ops) <to_post_attach>: Add argument.
2725         (target_post_attach): Add argument.
2726         * target.c (debug_to_post_attach): Add argument.
2727         (update_current_target): Update.
2728         * spu-linux-nat.c (spu_child_post_attach): Add 'self' argument.
2729         * nto-procfs.c (procfs_post_attach): Add 'self' argument.
2730         * linux-nat.c (linux_child_post_attach): Add 'self' argument.
2731         * inf-ptrace.c (inf_ptrace_post_attach): Add 'self' argument.
2732         * inf-child.c (inf_child_post_attach): Add 'self' argument.
2733
2734 2014-02-19  Tom Tromey  <tromey@redhat.com>
2735
2736         * windows-nat.c (windows_close): Add 'self' argument.
2737         * tracepoint.c (tfile_close): Add 'self' argument.
2738         * target.h (struct target_ops) <to_close>: Add argument.
2739         * target.c (target_close): Add argument.
2740         (update_current_target): Update.
2741         * remote.c (remote_close): Add 'self' argument.
2742         * remote-sim.c (gdbsim_close): Add 'self' argument.
2743         * remote-mips.c (mips_close): Add 'self' argument.
2744         * remote-m32r-sdi.c (m32r_close): Add 'self' argument.
2745         * record-full.c (record_full_close): Add 'self' argument.
2746         * record-btrace.c (record_btrace_close): Add 'self' argument.
2747         * monitor.h (monitor_close): Add 'self' argument.
2748         * monitor.c (monitor_close): Add 'self' argument.
2749         * mips-linux-nat.c (mips_linux_close): Add 'self' argument.
2750         * linux-nat.c (linux_nat_close): Add argument.
2751         * go32-nat.c (go32_close): Add 'self' argument.
2752         * exec.c (exec_close_1): Add 'self' argument.
2753         * ctf.c (ctf_close): Add 'self' argument.
2754         * corelow.c (core_close): Add 'self' argument.
2755         (core_close_cleanup): Update.
2756         * bsd-uthread.c (bsd_uthread_close): Add 'self' argument.
2757         * bsd-kvm.c (bsd_kvm_close): Add 'self' argument.
2758
2759 2014-02-19  Tom Tromey  <tromey@redhat.com>
2760
2761         * remote.c (remote_load): New function.
2762         (init_remote_ops): Use it.
2763
2764 2014-02-19  Tom Tromey  <tromey@redhat.com>
2765
2766         * common/linux-btrace.c (linux_supports_btrace): Add "ops"
2767         argument.
2768         * common/linux-btrace.h (linux_supports_btrace): Update.
2769         * remote.c (remote_supports_btrace): Add "self" argument.
2770         * target-delegates.c: Rebuild.
2771         * target.c (target_supports_btrace): Remove.
2772         * target.h (struct target_ops) <to_supports_btrace>: Add
2773         target_ops argument.
2774         (target_supports_btrace): New define.
2775
2776 2014-02-19  Tom Tromey  <tromey@redhat.com>
2777
2778         * record-full.c (record_full_beneath_to_resume_ops)
2779         (record_full_beneath_to_resume, record_full_beneath_to_wait_ops)
2780         (record_full_beneath_to_wait)
2781         (record_full_beneath_to_store_registers_ops)
2782         (record_full_beneath_to_store_registers)
2783         (record_full_beneath_to_xfer_partial_ops)
2784         (record_full_beneath_to_xfer_partial)
2785         (record_full_beneath_to_insert_breakpoint_ops)
2786         (record_full_beneath_to_insert_breakpoint)
2787         (record_full_beneath_to_remove_breakpoint_ops)
2788         (record_full_beneath_to_remove_breakpoint)
2789         (record_full_beneath_to_stopped_by_watchpoint)
2790         (record_full_beneath_to_stopped_data_address)
2791         (record_full_beneath_to_async, tmp_to_resume_ops, tmp_to_resume)
2792         (tmp_to_wait_ops, tmp_to_wait, tmp_to_store_registers_ops)
2793         (tmp_to_store_registers, tmp_to_xfer_partial_ops)
2794         (tmp_to_xfer_partial, tmp_to_instmp_to_insert_breakpoint_ops)
2795         (tmp_to_insert_breakpoint, tmp_to_remove_breakpoint_ops)
2796         (tmp_to_remove_breakpoint, tmp_to_stopped_by_watchpoint)
2797         (tmp_to_stopped_data_address, tmp_to_async): Remove.
2798         (record_full_open_1, record_full_open): Update.  Use RECORD_IS_USED.
2799         (record_full_resume, record_full_wait_1)
2800         (record_full_stopped_by_watchpoint, record_full_stopped_data_address)
2801         (record_full_store_registers, record_full_xfer_partial)
2802         (record_full_insert_breakpoint, record_full_remove_breakpoint)
2803         (record_full_async, record_full_core_xfer_partial): Use target
2804         delegation.
2805         * target-delegates.c: Rebuild.
2806         * target.c (current_xfer_partial): Remove.
2807         (update_current_target): Do not INHERIT or de_fault
2808         to_insert_breakpoint, to_remove_breakpoint,
2809         to_stopped_data_address, to_stopped_by_watchpoint, to_can_async_p,
2810         to_is_async_p, to_async.  Do not set to_xfer_partial field.
2811         (default_xfer_partial): Simplify.
2812         (current_xfer_partial): Remove.
2813         (target_wait, target_resume): Simplify.
2814         (find_default_can_async_p, find_default_is_async_p): Update.
2815         (init_dummy_target): Don't set to_can_async_p, to_is_async_p,
2816         to_xfer_partial, to_stopped_by_watchpoint,
2817         to_stopped_data_address.
2818         (target_store_registers): Simplify.
2819         (forward_target_remove_breakpoint)
2820         (forward_target_insert_breakpoint): Remove.
2821         (target_remove_breakpoint, target_insert_breakpoint)
2822         (debug_to_insert_breakpoint, debug_to_remove_breakpoint): Update.
2823         * target.h (struct target_ops) <to_resume, to_wait,
2824         to_store_registers, to_insert_breakpoint, to_remove_breakpoint,
2825         to_stopped_by_watchpoint, to_stopped_data_address, to_can_async_p,
2826         to_is_async_p, to_async, to_xfer_partial>: Add TARGET_DEFAULT
2827         markup.
2828         (forward_target_remove_breakpoint)
2829         (forward_target_insert_breakpoint): Remove.
2830         * record-btrace.c (record_btrace_remove_breakpoint): Delegate
2831         directly.
2832         (record_btrace_insert_breakpoint): Delegate directly.
2833
2834 2014-02-19  Tom Tromey  <tromey@redhat.com>
2835
2836         PR build/7701:
2837         * target-delegates.c: New file.
2838         * target.c: Include target-delegates.c.
2839         (init_dummy_target): Call install_dummy_methods.
2840         (complete_target_initialization): Call install_delegators.
2841         * target.h (TARGET_DEFAULT_IGNORE, TARGET_DEFAULT_NORETURN)
2842         (TARGET_DEFAULT_RETURN, TARGET_DEFAULT_FUNC): New defines.
2843         * make-target-delegates: New file.
2844
2845 2014-02-19  Tom Tromey  <tromey@redhat.com>
2846
2847         * record.c (find_record_target): Use find_target_at.
2848         * target.c (find_target_at): New function.
2849         * target.h (find_target_at): Declare.
2850
2851 2014-02-19  Tom Tromey  <tromey@redhat.com>
2852
2853         * aarch64-linux-nat.c (aarch64_linux_stopped_by_watchpoint):
2854         Add 'ops' argument.
2855         * arm-linux-nat.c (arm_linux_stopped_by_watchpoint): Add
2856         'ops' argument.
2857         * i386-nat.c (i386_stopped_by_watchpoint): Add 'ops' argument.
2858         * ia64-linux-nat.c (ia64_linux_stopped_by_watchpoint): Add
2859         'ops' argument.
2860         * inf-ttrace.c (inf_ttrace_stopped_by_watchpoint): Add 'ops'
2861         argument.
2862         * linux-nat.c (save_sigtrap): Update.
2863         (linux_nat_stopped_by_watchpoint, linux_nat_is_async_p)
2864         (linux_nat_can_async_p, linux_nat_async): Add 'ops' argument.
2865         (linux_nat_close): Update.
2866         * mips-linux-nat.c (mips_linux_stopped_by_watchpoint): Add 'ops'
2867         argument.
2868         * ppc-linux-nat.c (ppc_linux_stopped_by_watchpoint): Add 'ops'
2869         argument.
2870         * procfs.c (procfs_stopped_by_watchpoint): Add 'ops' argument.
2871         * record-full.c (record_full_beneath_to_stopped_by_watchpoint)
2872         (record_full_beneath_to_async, tmp_to_stopped_by_watchpoint)
2873         (tmp_to_async): Add 'ops' argument.
2874         (record_full_stopped_by_watchpoint, record_full_async)
2875         (record_full_can_async_p, record_full_is_async_p): Add 'ops'
2876         argument.
2877         * remote-m32r-sdi.c (m32r_insert_breakpoint, m32r_remove_breakpoint)
2878         (m32r_stopped_by_watchpoint): Add 'ops' argument.
2879         * remote-mips.c (mips_stopped_by_watchpoint): Add 'ops' argument.
2880         * remote.c (remote_stopped_by_watchpoint_p, remote_can_async_p)
2881         (remote_is_async_p, remote_async): Add 'ops' argument.
2882         (remote_stopped_data_address): Update.
2883         * s390-nat.c (s390_stopped_by_watchpoint): Add 'ops' argument.
2884         * target.c (update_current_target)
2885         (find_default_can_async_p, find_default_is_async_p): Update.
2886         (init_dummy_target): Update.
2887         (debug_to_stopped_by_watchpoint): Add 'ops' argument.
2888         * target.h (struct target_ops) <to_stopped_by_watchpoint,
2889         to_can_async_p, to_is_async_p, to_async>: Add 'ops' argument.
2890         (target_can_async_p, target_is_async_p, target_async)
2891         (target_stopped_by_watchpoint): Update.
2892
2893 2014-02-19  Yao Qi  <yao@codesourcery.com>
2894
2895         PR gdb/16220
2896         * gdbarch.sh: Remove startup_gdbarch.
2897         * gdbarch.c: Regenerated.
2898         * gdbarch.h: Likewise.
2899
2900 2014-02-17  Kevin Buettner  <kevinb@redhat.com>
2901
2902         * rl78-tdep.c (rl78_g10_register_name): New function.
2903         (rl78_return_value): Add g10 support.
2904         (rl78_gdbarch_init): Register rl78_g10_register_name for the
2905         g10.
2906
2907 2014-02-17  Doug Evans  <xdje42@gmail.com>
2908
2909         * Makefile.in (SUBDIR_GUILE_OBS): Resort alphabetically.
2910         (SUBDIR_GUILE_SRCS): Ditto.
2911         (scm-gsmob.o): Ditto.
2912
2913 2014-02-17  Yao Qi  <yao@codesourcery.com>
2914
2915         * gnu-nat.c (ILL_RPC): Declare defined function.
2916
2917 2014-02-17  Yao Qi  <yao@codesourcery.com>
2918
2919         * gnu-nat.c (gnu_read_inferior): Change 'copy_count' type to
2920         mach_msg_type_number_t.
2921         (gnu_write_inferior): Likewise.
2922
2923 2014-02-17  Yao Qi  <yao@codesourcery.com>
2924
2925         * gnu-nat.c (proc_get_exception_port): Use 'lu' insetad of 'd'
2926         in format string.
2927         (proc_steal_exc_port, make_proc, inf_set_pid): Likewise.
2928         (inf_validate_procs, inf_signal): Likewise.
2929         (S_exception_raise_request): Likewise.
2930         (do_mach_notify_dead_name): Likewise.
2931         (steal_exc_port): Likewise.
2932         (gnu_read_inferior): Change 'copy_count''s type to
2933         mach_msg_type_number_t.
2934         (gnu_write_inferior): Likewise.  Use 'lx' instead of 'x' in
2935         format string.
2936
2937 2014-02-16  Thomas Schwinge  <thomas@codesourcery.com>
2938
2939         * gnu-nat.c (struct inf): Change pending_execs member to a 1-bit
2940         flag.  Adjust all users; in particular...
2941         (gnu_wait): ..., don't decrement its value in here...
2942         (gnu_create_inferior): ..., and instead set the flag in here,
2943         around the startup_inferior call, and call that one with
2944         START_INFERIOR_TRAPS_EXPECTED.
2945
2946         * gnu-nat.c (ill_rpc): Remove function; replaced with this...
2947         (ILL_RPC): ... new macro.
2948         (do_mach_notify_no_senders, do_mach_notify_port_deleted)
2949         (do_mach_notify_msg_accepted, do_mach_notify_port_destroyed)
2950         (do_mach_notify_send_once, S_proc_setmsgport_reply)
2951         (S_proc_getmsgport_reply, S_msg_sig_post_reply): Generate stub
2952         functions with ILL_RPC macro.
2953         (S_proc_pid2task_reply, S_proc_task2pid_reply)
2954         (S_proc_task2proc_reply, S_proc_proc2task_reply)
2955         (S_proc_pid2proc_reply, S_proc_getprocinfo_reply)
2956         (S_proc_getprocargs_reply, S_proc_getprocenv_reply)
2957         (S_proc_getloginid_reply, S_proc_getloginpids_reply)
2958         (S_proc_getlogin_reply, S_proc_getsid_reply)
2959         (S_proc_getsessionpgids_reply, S_proc_getsessionpids_reply)
2960         (S_proc_getsidport_reply, S_proc_getpgrp_reply)
2961         (S_proc_getpgrppids_reply, S_proc_get_tty_reply)
2962         (S_proc_getnports_reply, S_proc_is_important_reply)
2963         (S_proc_get_code_reply): New stub functions, generated with
2964         ILL_RPC macro.
2965
2966         * reply_mig_hack.awk: In phase 5, keep going if we have not yet
2967         collected the type check structures.
2968
2969         * reply_mig_hack.awk: Don't expect to see the auto keyword.
2970
2971 2014-02-14  Doug Evans  <dje@google.com>
2972
2973         * target.c (target_write_partial): Fix result type.
2974
2975 2014-02-14  Jose E. Marchesi  <jose.marchesi@oracle.com>
2976
2977         * sparc64-linux-nat.c (_initialize_sparc64_linux_nat): Register
2978         the proper offsets to access fpregset_t.
2979
2980 2014-02-13  Sanimir Agovic  <sanimir.agovic@intel.com>
2981
2982         * cris-tdep.c (cris_supply_gregset): Remove zerobuf.
2983         (_initialize_cris_tdep): Remove cris_set_cmdlist, cris_show_cmdlist.
2984         * h8300-tdep.c (setmachinelist): Remove global.
2985         * hppa-tdep.c (hppa_sigtramp): Remove global.
2986         * mipsnbsd-tdep.c (sigtramp_retcode_mipsel, sigtramp_retcode_mipseb
2987         RETCODE_NWORDS, RETCODE_SIZE): Wrap code with #if 0.
2988         * ravenscar-thread.c (update_target_observer): Remove global.
2989         * rs6000-tdep.c (rs6000_gdbarch_init): Remove segment_regs.
2990
2991 2014-02-12  Tom Tromey  <tromey@redhat.com>
2992
2993         * common/rsp-low.c: Update comments.
2994         * common/rsp-low.h: Update comments.
2995
2996 2014-02-12  Tom Tromey  <tromey@redhat.com>
2997
2998         * common/rsp-low.c (convert_ascii_to_int): Remove.
2999         * common/rsp-low.h (convert_ascii_to_int): Don't declare.
3000
3001 2014-02-12  Tom Tromey  <tromey@redhat.com>
3002
3003         * common/rsp-low.h (unhexify): Don't declare.
3004         * common/rsp-low.c (unhexify): Remove.
3005
3006 2014-02-12  Tom Tromey  <tromey@redhat.com>
3007
3008         * common/rsp-low.h (convert_int_to_ascii): Don't declare.
3009         * common/rsp-low.c (convert_int_to_ascii): Remove.
3010
3011 2014-02-12  Tom Tromey  <tromey@redhat.com>
3012
3013         * common/rsp-low.h (hexify): Don't declare.
3014         * common/rsp-low.c (hexify): Remove.
3015
3016 2014-02-12  Tom Tromey  <tromey@redhat.com>
3017
3018         * common/rsp-low.c (hexify): Never take strlen of argument.
3019
3020 2014-02-12  Tom Tromey  <tromey@redhat.com>
3021
3022         * common/rsp-low.c (bin2hex): Never take strlen of argument.
3023         * remote.c (extended_remote_run, remote_rcmd)
3024         (remote_download_trace_state_variable, remote_save_trace_data)
3025         (remote_set_trace_notes): Update.
3026         * tracepoint.c (encode_source_string, tfile_write_status)
3027         (tfile_write_uploaded_tsv): Update.
3028
3029 2014-02-12  Tom Tromey  <tromey@redhat.com>
3030
3031         * tracepoint.c: Include rsp-low.h.
3032         * remote.h (hex2bin, bin2hex, unpack_varlen_hex): Don't declare.
3033         * remote.c: Include rsp-low.h.
3034         (hexchars, ishex, unpack_varlen_hex, pack_nibble, pack_hex_byte)
3035         (fromhex, hex2bin, tohex, bin2hex, remote_escape_output)
3036         (remote_unescape_input): Move to common/rsp-low.c.
3037         * common/rsp-low.h: New file.
3038         * common/rsp-low.c: New file.
3039         * Makefile.in (SFILES): Add common/rsp-low.c.
3040         (HFILES_NO_SRCDIR): Add common/rsp-low.h.
3041         (COMMON_OBS): Add rsp-low.o.
3042         (rsp-low.o): New target.
3043
3044 2014-02-12  Tom Tromey  <tromey@redhat.com>
3045
3046         * utils.h: Include print-utils.h.
3047         (host_address_to_string, plongest, pulongest, phex, phex_nz)
3048         (int_string, core_addr_to_string, core_addr_to_string_nz)
3049         (hex_string, hex_string_custom): Don't declare.
3050         * utils.c (NUMCELLS, CELLSIZE, get_cell, decimal2str, pulongest)
3051         (plongest, thirty_two, phex, phex_nz, octal2str, hex_string)
3052         (hex_string_custom, int_string, core_addr_to_string)
3053         (core_addr_to_string_nz, host_address_to_string): Move to
3054         common/print-utils.c.
3055         * common/print-utils.h: New file.
3056         * common/print-utils.c: New file
3057         * Makefile.in (SFILES): Add common/print-utils.c.
3058         (HFILES_NO_SRCDIR): Add common/print-utils.h.
3059         (COMMON_OBS): Add print-utils.o.
3060         (print-utils.o): New target.
3061
3062 2014-02-12  Tom Tromey  <tromey@redhat.com>
3063
3064         * nios2-tdep.c (nios2_stub_frame_base_address): Remove.
3065
3066 2014-02-12  Mark Kettenis  <kettenis@gnu.org>
3067
3068         * sparc64obsd-tdep.c (sparc64obsd_init_abi): Call obsd_init_abi.
3069
3070 2014-02-12  Mark Kettenis  <kettenis@gnu.org>
3071
3072         * inf-ptrace.c (inf_ptrace_xfer_partial): Return TARGET_XFER_EOF
3073         if a PT_IO ptrace request returns sucessfully but indicates that 0
3074         bytes were transferred.
3075
3076 2014-02-12  Pedro Alves  <palves@redhat.com>
3077             Kevin Buettner <kevinb@redhat.com>
3078
3079         * gnu-v3-abi.c (build_gdb_vtable_type): Return a type marked with
3080         TYPE_INSTANCE_FLAG_CODE_SPACE.
3081
3082 2014-02-12  Pedro Alves  <palves@redhat.com>
3083
3084         * h8300-tdep.c (pseudo_from_raw_register)
3085         (raw_from_pseudo_register): New functions.
3086         (h8300_pseudo_register_read, h8300_pseudo_register_write): Use
3087         them.
3088
3089 2014-02-12  Pedro Alves  <palves@redhat.com>
3090
3091         * h8300-tdep.c (h8300_register_sim_regno): New function.
3092         (h8300_gdbarch_init): Install h8300_register_sim_regno as
3093         gdbarch_register_sim_regno hook.
3094
3095 2014-02-12  Sanimir Agovic  <sanimir.agovic@intel.com>
3096
3097         * nios2-tdep.c (nios2_stub_frame_base): Remove global.
3098
3099 2014-02-12  Sanimir Agovic  <sanimir.agovic@intel.com>
3100
3101         * tic6x-tdep.c (tic6x_gdbarch_init): Call frame_base_set_default.
3102
3103 2014-02-12  Mark Kettenis  <kettenis@gnu.org>
3104
3105         * obsd-tdep.h (obsd_init_abi): New prototype.
3106         * obsd-tdep.c: Define enum with OpenBSD signal numbers.
3107         (obsd_gdb_signal_from_target, obsd_gdb_signal_to_target)
3108         (obsd_init_abi): New functions.
3109         * i386obsd-tdep.c: Include "obsd-tdep.h".
3110         (i386obsd_init_abi): Call obsd_init_abi.
3111         * amd64obsd-tdep.c: Include "obsd-tdep.h".
3112         (amd64obsd_init_abi): Call obsd_init_abi.
3113         * configure.tgt (i[34567]86-*-openbsd*, x86_64-*-openbsd*): Add
3114         obsd-tdep.c to gdb_target_obs.
3115
3116 2014-02-11  Jose E. Marchesi  <jose.marchesi@oracle.com>
3117
3118         * sparc64-tdep.c (sparc64_store_arguments): Do not align complex
3119         double float arguments to 16-byte in the argument slots.
3120
3121 2014-02-11  Doug Evans  <xdje42@gmail.com>
3122
3123         * configure.ac: Don't crash if pkg-config is not found and guile
3124         wasn't explicitly requested.  Use AC_MSG_ERROR instead of AC_ERROR
3125         in guile checks.
3126         * configure: Regenerate.
3127
3128 2014-02-11  Yao Qi  <yao@codesourcery.com>
3129
3130         * aix-thread.c (aix_thread_xfer_partial): Update comments.
3131         * auxv.c (procfs_xfer_auxv, memory_xfer_auxv): Likewise.
3132         * bsd-uthread.c (bsd_uthread_xfer_partial): Likewise.
3133         * gnu-nat.c (gnu_xfer_memory): Likewise.
3134         * inf-ptrace.c (inf_ptrace_xfer_partial):  Likewise.
3135         * rs6000-nat.c (rs6000_xfer_partial): Likewise.
3136         * sparc-nat.c (sparc_xfer_wcookie): Likewise.
3137         * spu-linux-nat.c (spu_proc_xfer_spu): Likewise.
3138
3139 2014-02-11  Yao Qi  <yao@codesourcery.com>
3140
3141         * target.h (enum target_xfer_error): Rename to ...
3142         (enum target_xfer_status): ... it.  New.  All users updated.
3143         (enum target_xfer_status) <TARGET_XFER_OK>, <TARGET_XFER_EOF>:
3144         New.
3145         (TARGET_XFER_STATUS_ERROR_P): New macro.
3146         (target_xfer_error_to_string): Remove declaration.
3147         (target_xfer_status_to_string): Declare.
3148         (target_xfer_partial_ftype): Adjust it.
3149         (struct target_ops) <to_xfer_partial>: Return
3150         target_xfer_status.  Add argument xfered_len.  Update
3151         comments.
3152         * target.c (target_xfer_error_to_string): Rename to ...
3153         (target_xfer_status_to_string): ... it.  New.  All callers
3154         updated.
3155         (target_read_live_memory): Likewise.  Call target_xfer_partial
3156         instead of target_read.
3157         (memory_xfer_live_readonly_partial): Return
3158         target_xfer_status.  Add argument xfered_len.
3159         (raw_memory_xfer_partial): Likewise.
3160         (memory_xfer_partial_1): Likewise.
3161         (memory_xfer_partial): Likewise.
3162         (target_xfer_partial): Likewise.  Check *XFERED_LEN is set
3163         properly.  Update debug message.
3164         (default_xfer_partial, current_xfer_partial): Likewise.
3165         (target_write_partial): Likewise.
3166         (target_read_partial): Likewise.  All callers updated.
3167         (read_whatever_is_readable): Likewise.
3168         (target_write_with_progress): Likewise.
3169         (target_read_alloc_1): Likewise.
3170
3171         * aix-thread.c (aix_thread_xfer_partial): Likewise.
3172         * auxv.c (procfs_xfer_auxv): Likewise.
3173         (ld_so_xfer_auxv, memory_xfer_auxv): Likewise.
3174         * bfd-target.c (target_bfd_xfer_partial): Likewise.
3175         * bsd-kvm.c (bsd_kvm_xfer_partial): Likewise.
3176         * bsd-uthread.c (bsd_uthread_xfer_partia): Likewise.
3177         * corefile.c (read_memory): Adjust.
3178         * corelow.c (core_xfer_partial): Likewise.
3179         * ctf.c (ctf_xfer_partial): Likewise.
3180         * darwin-nat.c (darwin_read_dyld_info): Likewise.  All callers
3181         updated.
3182         (darwin_xfer_partial): Likewise.
3183         * exec.c (section_table_xfer_memory_partial): Likewise.  All
3184         callers updated.
3185         (exec_xfer_partial): Likewise.
3186         * exec.h (section_table_xfer_memory_partial): Update
3187         declaration.
3188         * gnu-nat.c (gnu_xfer_memory): Likewise.  Assert 'res' is not
3189         negative.
3190         (gnu_xfer_partial): Likewise.
3191         * ia64-hpux-nat.c (ia64_hpux_xfer_memory_no_bs): Likewise.
3192         (ia64_hpux_xfer_memory, ia64_hpux_xfer_uregs): Likewise.
3193         (ia64_hpux_xfer_solib_got): Likewise.
3194         * inf-ptrace.c (inf_ptrace_xfer_partial): Likewise.  Change
3195         type of 'partial_len' to ULONGEST.
3196         * inf-ttrace.c (inf_ttrace_xfer_partial): Likewise.
3197         * linux-nat.c (linux_xfer_siginfo ): Likewise.
3198         (linux_nat_xfer_partial): Likewise.
3199         (linux_proc_xfer_partial, linux_xfer_partial): Likewise.
3200         (linux_proc_xfer_spu, linux_nat_xfer_osdata): Likewise.
3201         * monitor.c (monitor_xfer_memory): Likewise.
3202         (monitor_xfer_partial): Likewise.
3203         * procfs.c (procfs_xfer_partial): Likewise.
3204         * record-btrace.c (record_btrace_xfer_partial): Likewise.
3205         * record-full.c (record_full_xfer_partial): Likewise.
3206         (record_full_core_xfer_partial): Likewise.
3207         * remote-sim.c (gdbsim_xfer_memory): Likewise.
3208         (gdbsim_xfer_partial): Likewise.
3209         * remote.c (remote_write_bytes_aux): Likewise.  All callers
3210         updated.
3211         (remote_write_bytes, remote_read_bytes): Likewise.  All
3212         callers updated.
3213         (remote_flash_erase): Likewise.  All callers updated.
3214         (remote_write_qxfer): Likewise.  All callers updated.
3215         (remote_read_qxfer): Likewise.  All callers updated.
3216         (remote_xfer_partial): Likewise.
3217         * rs6000-nat.c (rs6000_xfer_partial): Likewise.
3218         (rs6000_xfer_shared_libraries): Likewise.
3219         * sol-thread.c (sol_thread_xfer_partial): Likewise.
3220         (sol_thread_xfer_partial): Likewise.
3221         * sparc-nat.c (sparc_xfer_wcookie): Likewise.
3222         (sparc_xfer_partial): Likewise.
3223         * spu-linux-nat.c (spu_proc_xfer_spu): Likewise.  All callers
3224         updated.
3225         (spu_xfer_partial): Likewise.
3226         * spu-multiarch.c (spu_xfer_partial): Likewise.
3227         * tracepoint.c (tfile_xfer_partial): Likewise.
3228         * windows-nat.c (windows_xfer_memory): Likewise.
3229         (windows_xfer_shared_libraries): Likewise.
3230         (windows_xfer_partial): Likewise.
3231         * valprint.c: Replace 'target_xfer_error' with
3232         'target_xfer_status' in comments.
3233
3234 2014-02-11  Simon Marchi  <simon.marchi@ericsson.com>  (tiny patch)
3235
3236         Checked in by Joel Brobecker <brobecker@adacore.com>.
3237         * mi/mi-main.c (mi_cmd_data_write_memory_bytes): Fix comment.
3238
3239 2014-02-11  Joel Brobecker  <brobecker@adacore.com>
3240
3241         * symfile-debug.c (debug_qf_expand_symtabs_matching): Reformat
3242         function parameters.
3243
3244 2014-02-10  Will Newton  <will.newton@linaro.org>
3245
3246         * elfread.c (elf_rel_plt_read): Look for a .got section if
3247         looking up .got.plt fails.
3248         (elf_gnu_ifunc_resolve_by_got): Call gdbarch_addr_bits_remove
3249         on address passed to elf_gnu_ifunc_record_cache.
3250         (elf_gnu_ifunc_resolve_addr): Likewise.
3251         (elf_gnu_ifunc_resolver_return_stop): Likewise.
3252
3253 2014-02-10  Jose E. Marchesi  <jose.marchesi@oracle.com>
3254
3255         * sparc-tdep.c (sparc_in_function_epilogue_p): New function.
3256         (X_RETTURN): New macro.
3257         * sparc-tdep.h: sparc_in_function_epilogue_p prototype.
3258
3259         * sparc64-tdep.c (sparc64_init_abi): Hook
3260         sparc_in_function_epilogue_p.
3261
3262 2014-02-10  Gary Benson  <gbenson@redhat.com>
3263
3264         * symfile-debug.c (debug_qf_expand_symtabs_matching):
3265         Rename name_matcher to symbol_matcher.
3266
3267 2014-02-10  Gary Benson  <gbenson@redhat.com>
3268
3269         * symfile-debug.c (debug_qf_expand_symtabs_matching):
3270         Use expand_symtabs_file_matcher_ftype and
3271         expand_symtabs_symbol_matcher_ftype.
3272
3273 2014-02-10  Joel Brobecker  <brobecker@adacore.com>
3274
3275         * ada-lang.c (struct cache_entry, HASH_SIZE): Move definition up.
3276         (struct ada_symbol_cache): New.
3277         (ada_free_symbol_cache): Forward declare.
3278         (struct ada_pspace_data): New.
3279         (ada_pspace_data_handle): New static global.
3280         (get_ada_pspace_data, ada_pspace_data_cleanup)
3281         (ada_init_symbol_cache, ada_free_symbol_cache): New functions.
3282         (cache_space, cache): Delete, now folded inside struct
3283         ada_pspace_data.
3284         (ada_get_symbol_cache): New function.
3285         (ada_clear_symbol_cache, find_entry, cache_symbol): Adjust
3286         implementation.
3287         (_initialize_ada_language): Remove initialization of cache_space.
3288         Move call to observer_attach_inferior_exit up, grouping it
3289         with the other observer registrations inside this function.
3290         Rename command to be more general.  Add call to
3291         register_program_space_data_with_cleanup.
3292
3293 2014-02-10  Joel Brobecker  <brobecker@adacore.com>
3294
3295         * ada-tasks.c (ada_tasks_new_objfile_observer): Renames
3296         ada_new_objfile_observer.
3297         (ada_tasks_normal_stop_observer): Renames ada_normal_stop_observer.
3298         (_initialize_tasks): Update uses of ada_new_objfile_observer
3299         and ada_tasks_normal_stop_observer.
3300
3301 2014-02-10  Joel Brobecker  <brobecker@adacore.com>
3302
3303         * ada-lang.c (ada_evaluate_subexp): Set the type of the value
3304         returned by the 'Length attribute to integer.
3305
3306 2014-02-10  Joel Brobecker  <brobecker@adacore.com>
3307
3308         * ada-lang.c (_initialize_ada_language): Initialize
3309         cache_space obstack.
3310
3311 2014-02-10  Joel Brobecker  <brobecker@adacore.com>
3312
3313         * ada-lang.c (HASH_SIZE): New macro.
3314         (struct cache_entry): New type.
3315         (cache_space, cache): New static globals.
3316         (ada_clear_symbol_cache, find_entry): New functions.
3317         (lookup_cached_symbol, cache_symbol): Implement.
3318         (ada_new_objfile_observer, ada_free_objfile_observer): New.
3319         (_initialize_ada_language): Attach ada_new_objfile_observer
3320         and ada_free_objfile_observer.
3321
3322 2014-02-10  Joel Brobecker  <brobecker@adacore.com>
3323
3324         * ada-lang.c (ada_add_block_symbols, add_defn_to_vec)
3325         (lookup_cached_symbol, ada_add_local_symbols): Add "const" to
3326         struct block * parameter.
3327         (ada_lookup_symbol_list_worker): Constify local variable "block".
3328         Remove cast which is no longer necessary.
3329
3330 2014-02-10  Doug Evans  <xdje42@gmail.com>
3331
3332         Add Guile as an extension language.
3333         * NEWS: Mention Guile scripting.
3334         * Makefile.in (SUBDIR_GUILE_OBS): New variable.
3335         (SUBDIR_GUILE_SRCS, SUBDIR_GUILE_DEPS): New variables
3336         (SUBDIR_GUILE_LDFLAGS, SUBDIR_GUILE_CFLAGS): New variables.
3337         (INTERNAL_CPPFLAGS): Add GUILE_CPPFLAGS.
3338         (CLIBS): Add GUILE_LIBS.
3339         (install-guile): New rule.
3340         (guile.o): New rule.
3341         (scm-arch.o, scm-auto-load.o, scm-block.o): New rules.
3342         (scm-breakpoint.o, scm-disasm.o, scm-exception.o): New rules.
3343         (scm-frame.o, scm-iterator.o, scm-lazy-string.o): New rules.
3344         (scm-math.o, scm-objfile.o, scm-ports.o): New rules.
3345         (scm-pretty-print.o, scm-safe-call.o, scm-gsmob.o): New rules.
3346         (scm-string.o, scm-symbol.o, scm-symtab.o): New rules.
3347         (scm-type.o, scm-utils.o, scm-value.o): New rules.
3348         * configure.ac: New option --with-guile.
3349         * configure: Regenerate.
3350         * config.in: Regenerate.
3351         * auto-load.c: Remove #include "python/python.h".  Add #include
3352         "gdb/section-scripts.h".
3353         (source_section_scripts): Handle Guile scripts.
3354         (_initialize_auto_load): Add name of Guile objfile script to
3355         scripts-directory help text.
3356         * breakpoint.c (condition_command): Tweak comment to include Scheme.
3357         * breakpoint.h (gdbscm_breakpoint_object): Add forward decl.
3358         (struct breakpoint): New member scm_bp_object.
3359         * defs.h (enum command_control_type): New value guile_control.
3360         * cli/cli-cmds.c: Remove #include "python/python.h".  Add #include
3361         "extension.h".
3362         (show_user): Update comment.
3363         (_initialize_cli_cmds): Update help text for "show user".  Update help
3364         text for max-user-call-depth.
3365         * cli/cli-script.c: Remove #include "python/python.h".  Add #include
3366         "extension.h".
3367         (multi_line_command_p): Add guile_control.
3368         (print_command_lines): Handle guile_control.
3369         (execute_control_command, recurse_read_control_structure): Ditto.
3370         (process_next_line): Recognize "guile" commands.
3371         * disasm.c (gdb_disassemble_info): Make non-static.
3372         * disasm.h: #include "dis-asm.h".
3373         (struct gdbarch): Add forward decl.
3374         (gdb_disassemble_info): Declare.
3375         * extension.c: #include "guile/guile.h".
3376         (extension_languages): Add guile.
3377         (get_ext_lang_defn): Handle EXT_LANG_GDB.
3378         * extension.h (enum extension_language): New value EXT_LANG_GUILE.
3379         * gdbtypes.c (get_unsigned_type_max): New function.
3380         (get_signed_type_minmax): New function.
3381         * gdbtypes.h (get_unsigned_type_max): Declare.
3382         (get_signed_type_minmax): Declare.
3383         * guile/README: New file.
3384         * guile/guile-internal.h: New file.
3385         * guile/guile.c: New file.
3386         * guile/guile.h: New file.
3387         * guile/scm-arch.c: New file.
3388         * guile/scm-auto-load.c: New file.
3389         * guile/scm-block.c: New file.
3390         * guile/scm-breakpoint.c: New file.
3391         * guile/scm-disasm.c: New file.
3392         * guile/scm-exception.c: New file.
3393         * guile/scm-frame.c: New file.
3394         * guile/scm-gsmob.c: New file.
3395         * guile/scm-iterator.c: New file.
3396         * guile/scm-lazy-string.c: New file.
3397         * guile/scm-math.c: New file.
3398         * guile/scm-objfile.c: New file.
3399         * guile/scm-ports.c: New file.
3400         * guile/scm-pretty-print.c: New file.
3401         * guile/scm-safe-call.c: New file.
3402         * guile/scm-string.c: New file.
3403         * guile/scm-symbol.c: New file.
3404         * guile/scm-symtab.c: New file.
3405         * guile/scm-type.c: New file.
3406         * guile/scm-utils.c: New file.
3407         * guile/scm-value.c: New file.
3408         * guile/lib/gdb.scm: New file.
3409         * guile/lib/gdb/boot.scm: New file.
3410         * guile/lib/gdb/experimental.scm: New file.
3411         * guile/lib/gdb/init.scm: New file.
3412         * guile/lib/gdb/iterator.scm: New file.
3413         * guile/lib/gdb/printing.scm: New file.
3414         * guile/lib/gdb/types.scm: New file.
3415         * data-directory/Makefile.in (GUILE_SRCDIR): New variable.
3416         (VPATH): Add $(GUILE_SRCDIR).
3417         (GUILE_DIR): New variable.
3418         (GUILE_INSTALL_DIR, GUILE_FILES): New variables.
3419         (all): Add stamp-guile dependency.
3420         (stamp-guile): New rule.
3421         (clean-guile, install-guile, uninstall-guile): New rules.
3422         (install-only): Add install-guile dependency.
3423         (uninstall): Add uninstall-guile dependency.
3424         (clean): Add clean-guile dependency.
3425
3426 2014-02-09  Doug Evans  <xdje42@gmail.com>
3427
3428         Revert this patch (which I approved, mea culpa).
3429
3430         2014-02-08  Mark Kettenis  <kettenis@gnu.org>
3431
3432         * Makefile.in (all-lib): Remove.
3433         ($(LIBGNU) $(GNULIB_H)): Replace with gits of remove all-lib target.
3434
3435 2014-02-09  Jan Kratochvil  <jan.kratochvil@redhat.com>
3436
3437         Fix Python stack corruption.
3438         * python/py-linetable.c (ltpy_get_pcs_for_line, ltpy_has_line): Use
3439         gdb_py_longest.
3440
3441 2014-02-08  Mark Kettenis  <kettenis@gnu.org>
3442
3443         * Makefile.in (all-lib): Remove.
3444         ($(LIBGNU) $(GNULIB_H)): Replace with gits of remove all-lib target.
3445
3446 2014-02-07  Doug Evans  <dje@google.com>
3447
3448         * extension-priv.h (extension_language_script_ops): Add comment.
3449         (extension_language_ops): Add comment.
3450         (active_ext_lang_state): Fix typo in comment.
3451
3452 2014-02-07  Pedro Alves  <palves@redhat.com>
3453
3454         PR breakpoints/16292
3455         * infrun.c (handle_signal_stop) <signal arrives while stepping
3456         over a breakpoint>: Switch back to the stepping thread.
3457
3458 2014-02-07  Yao Qi  <yao@codesourcery.com>
3459
3460         * target.c (target_xfer_partial): Return zero if LEN is zero.
3461
3462 2014-02-07  Yao Qi  <yao@codesourcery.com>
3463
3464         * auxv.c (procfs_xfer_auxv): Replace -1 with TARGET_XFER_E_IO.
3465         (ld_so_xfer_auxv): Likewise.
3466         * bfd-target.c (target_bfd_xfer_partial): Likewise.
3467         * bsd-kvm.c (bsd_kvm_xfer_partial): Likewise.
3468         * corelow.c (core_xfer_partial): Likewise.
3469         * ctf.c (ctf_xfer_partial): Likewise.
3470         * darwin-nat.c (darwin_read_dyld_info): Likewise.
3471         (darwin_xfer_partial): Likewise.
3472         * exec.c (exec_xfer_partial): Likewise.
3473         * gnu-nat.c (gnu_xfer_partial): Likewise.
3474         * ia64-hpux-nat.c (ia64_hpux_xfer_uregs): Likewise.
3475         * inf-ptrace.c (inf_ptrace_xfer_partial): Likewise.
3476         * inf-ttrace.c (inf_ttrace_xfer_partial): Likewise.
3477         * linux-nat.c (linux_xfer_siginfo): Likewise.
3478         (linux_proc_xfer_spu): Likewise.
3479         * procfs.c (procfs_xfer_partial): Likewise.
3480         * record-full.c (record_full_xfer_partial): Likewise.
3481         (record_full_core_xfer_partial): Likewise.
3482         * remote-sim.c (gdbsim_xfer_partial): Likewise.
3483         * remote.c (remote_write_qxfer): Likewise.
3484         (remote_write_qxfer, remote_read_qxfer): Likewise.
3485         (remote_xfer_partial): Likewise.
3486         * rs6000-nat.c (rs6000_xfer_partial): Likewise.
3487         (rs6000_xfer_shared_libraries): Likewise.
3488         * sparc-nat.c (sparc_xfer_wcookie): Likewise.
3489         * spu-linux-nat.c (spu_proc_xfer_spu): Likewise.
3490         (spu_xfer_partial): Likewise.
3491         * target.c (memory_xfer_partial_1): Likewise.
3492         * tracepoint.c (tfile_xfer_partial): Likewise.
3493         * windows-nat.c (windows_xfer_shared_libraries): Likewise.
3494         (windows_xfer_partial): Likewise.
3495
3496 2014-02-07  Yao Qi  <yao@codesourcery.com>
3497
3498         * gdbarch.sh (core_xfer_shared_libraries): Returns ULONGEST.  Add
3499         comments.
3500         (core_xfer_shared_libraries_aix): Likewise.
3501         * gdbarch.c, gdbarch.h: Regenerated.
3502         * i386-cygwin-tdep.c (windows_core_xfer_shared_libraries): Return
3503         ULONGEST.  Change 'len_avail' type to ULONGEST.
3504         * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise.
3505         * rs6000-aix-tdep.h (rs6000_aix_ld_info_to_xml): Update
3506         declaration.
3507         (rs6000_aix_core_xfer_shared_libraries_aix): Return ULONGEST.
3508
3509 2014-02-07  Yao Qi  <yao@codesourcery.com>
3510
3511         * corefile.c (memory_error): Get 'exception' from ERR and pass
3512         'exception' to throw_error.
3513
3514 2014-02-06  Doug Evans  <xdje42@gmail.com>
3515
3516         * configure.ac (libpython checking): Remove all but python.o from
3517         CONFIG_OBS.  Remove all but python.c from CONFIG_SRCS.
3518         * configure: Regenerate.
3519
3520         * Makefile.in (SFILES): Add extension.c.
3521         (HFILES_NO_SRCDIR): Add extension.h, extension-priv.h
3522         (COMMON_OBS): Add extension.o.
3523         * extension.h: New file.
3524         * extension-priv.h: New file.
3525         * extension.c: New file.
3526
3527         * python/python-internal.h: #include "extension.h".
3528         (gdbpy_auto_load_enabled): Declare.
3529         (gdbpy_apply_val_pretty_printer): Declare.
3530         (gdbpy_apply_frame_filter): Declare.
3531         (gdbpy_preserve_values): Declare.
3532         (gdbpy_breakpoint_cond_says_stop): Declare.
3533         (gdbpy_breakpoint_has_cond): Declare.
3534         (void source_python_script_for_objfile): Delete.
3535         * python/python.c: #include "extension-priv.h".
3536         Delete inclusion of "observer.h".
3537         (extension_language_python): Moved here and renamed from
3538         script_language_python in py-auto-load.c.
3539         Redefined to be of type extension_language_defn.
3540         (python_extension_script_ops): New global.
3541         (python_extension_ops): New global.
3542         (struct python_env): New member previous_active.
3543         (restore_python_env): Call restore_active_ext_lang.
3544         (ensure_python_env): Call set_active_ext_lang.
3545         (gdbpy_clear_quit_flag): Renamed from clear_quit_flag, made static.
3546         New arg extlang.
3547         (gdbpy_set_quit_flag): Renamed from set_quit_flag, made static.
3548         New arg extlang.
3549         (gdbpy_check_quit_flag): Renamed from check_quit_flag, made static.
3550         New arg extlang.
3551         (gdbpy_eval_from_control_command): Renamed from
3552         eval_python_from_control_command, made static.  New arg extlang.
3553         (gdbpy_source_script) Renamed from source_python_script, made static.
3554         New arg extlang.
3555         (gdbpy_before_prompt_hook): Renamed from before_prompt_hook.  Change
3556         result to int.  New arg extlang.
3557         (gdbpy_source_objfile_script): Renamed from
3558         source_python_script_for_objfile, made static.  New arg extlang.
3559         (gdbpy_start_type_printers): Renamed from start_type_printers, made
3560         static.  New args extlang, extlang_printers.  Change result type to
3561         "void".
3562         (gdbpy_apply_type_printers): Renamed from apply_type_printers, made
3563         static.  New arg extlang.  Rename arg printers to extlang_printers
3564         and change type to ext_lang_type_printers *.
3565         (gdbpy_free_type_printers): Renamed from free_type_printers, made
3566         static.  Replace argument arg with extlang, extlang_printers.
3567         (!HAVE_PYTHON, eval_python_from_control_command): Delete.
3568         (!HAVE_PYTHON, source_python_script): Delete.
3569         (!HAVE_PYTHON, gdbpy_should_stop): Delete.
3570         (!HAVE_PYTHON, gdbpy_breakpoint_has_py_cond): Delete.
3571         (!HAVE_PYTHON, start_type_printers): Delete.
3572         (!HAVE_PYTHON, apply_type_printers): Delete.
3573         (!HAVE_PYTHON, free_type_printers): Delete.
3574         (_initialize_python): Delete call to observer_attach_before_prompt.
3575         (finalize_python): Set/restore active extension language.
3576         (gdbpy_finish_initialization) Renamed from
3577         finish_python_initialization, made static.  New arg extlang.
3578         (gdbpy_initialized): New function.
3579         * python/python.h: #include "extension.h".  Delete #include
3580         "value.h", "mi/mi-cmds.h".
3581         (extension_language_python): Declare.
3582         (GDBPY_AUTO_FILE_NAME): Delete.
3583         (enum py_bt_status): Moved to extension.h and renamed to
3584         ext_lang_bt_status.
3585         (enum frame_filter_flags): Moved to extension.h.
3586         (enum py_frame_args): Moved to extension.h and renamed to
3587         ext_lang_frame_args.
3588         (finish_python_initialization): Delete.
3589         (eval_python_from_control_command): Delete.
3590         (source_python_script): Delete.
3591         (apply_val_pretty_printer): Delete.
3592         (apply_frame_filter): Delete.
3593         (preserve_python_values): Delete.
3594         (gdbpy_script_language_defn): Delete.
3595         (gdbpy_should_stop, gdbpy_breakpoint_has_py_cond): Delete.
3596         (start_type_printers, apply_type_printers, free_type_printers): Delete.
3597
3598         * auto-load.c: #include "extension.h".
3599         (GDB_AUTO_FILE_NAME): Delete.
3600         (auto_load_gdb_scripts_enabled): Make public.  New arg extlang.
3601         (script_language_gdb): Delete, moved to extension.c and renamed to
3602         extension_language_gdb.
3603         (source_gdb_script_for_objfile): Delete.
3604         (auto_load_pspace_info): New member unsupported_script_warning_printed.
3605         (loaded_script): Change type of language member to
3606         struct extension_language_defn *.
3607         (init_loaded_scripts_info): Initialize
3608         unsupported_script_warning_printed.
3609         (maybe_add_script): Make static.  Change type of language arg to
3610         struct extension_language_defn *.
3611         (clear_section_scripts): Reset unsupported_script_warning_printed.
3612         (auto_load_objfile_script_1): Rewrite to use extension language API.
3613         (auto_load_objfile_script): Make public.  Remove support-compiled-in
3614         and auto-load-enabled checks, moved to auto_load_scripts_for_objfile.
3615         (source_section_scripts): Rewrite to use extension language API.
3616         (load_auto_scripts_for_objfile): Rewrite to use
3617         auto_load_scripts_for_objfile.
3618         (collect_matching_scripts_data): Change type of language member to
3619         struct extension_language_defn *.
3620         (auto_load_info_scripts): Change type of language arg to
3621         struct extension_language_defn *.
3622         (unsupported_script_warning_print): New function.
3623         (script_not_found_warning_print): Make static.
3624         (_initialize_auto_load): Rewrite construction of scripts-directory
3625         help.
3626         * auto-load.h (struct objfile): Add forward decl.
3627         (struct script_language): Delete.
3628         (struct auto_load_pspace_info): Add forward decl.
3629         (struct extension_language_defn): Add forward decl.
3630         (maybe_add_script): Delete.
3631         (auto_load_objfile_script): Declare.
3632         (script_not_found_warning_print): Delete.
3633         (auto_load_info_scripts): Update prototype.
3634         (auto_load_gdb_scripts_enabled): Declare.
3635         * python/py-auto-load.c (gdbpy_auto_load_enabled): Renamed from
3636         auto_load_python_scripts_enabled and made public.
3637         (script_language_python): Delete, moved to python.c.
3638         (gdbpy_script_language_defn): Delete.
3639         (info_auto_load_python_scripts): Update to use
3640         extension_language_python.
3641
3642         * breakpoint.c (condition_command): Replace call to
3643         gdbpy_breakpoint_has_py_cond with call to get_breakpoint_cond_ext_lang.
3644         (bpstat_check_breakpoint_conditions): Replace call to gdbpy_should_stop
3645         with call to breakpoint_ext_lang_cond_says_stop.
3646         * python/py-breakpoint.c (gdbpy_breakpoint_cond_says_stop): Renamed
3647         from gdbpy_should_stop.  Change result type to enum scr_bp_stop.
3648         New arg slang.  Return SCR_BP_STOP_UNSET if py_bp_object is NULL.
3649         (gdbpy_breakpoint_has_cond): Renamed from gdbpy_breakpoint_has_py_cond.
3650         New arg slang.
3651         (local_setattro): Print name of extension language with existing
3652         stop condition.
3653
3654         * valprint.c (val_print, value_print): Update to call
3655         apply_ext_lang_val_pretty_printer.
3656         * cp-valprint.c (cp_print_value): Update call to
3657         apply_ext_lang_val_pretty_printer.
3658         * python/py-prettyprint.c: Remove #ifdef HAVE_PYTHON.
3659         (gdbpy_apply_val_pretty_printer): Renamed from
3660         apply_val_pretty_printer.  New arg extlang.
3661         (!HAVE_PYTHON, apply_val_pretty_printer): Delete.
3662
3663         * cli/cli-cmds.c (source_script_from_stream): Rewrite to use
3664         extension language API.
3665         * cli/cli-script.c (execute_control_command): Update to call
3666         eval_ext_lang_from_control_command.
3667
3668         * mi/mi-cmd-stack.c (mi_cmd_stack_list_frames): Update to use
3669         enum ext_lang_bt_status values.  Update call to
3670         apply_ext_lang_frame_filter.
3671         (mi_cmd_stack_list_locals): Ditto.
3672         (mi_cmd_stack_list_args): Ditto.
3673         (mi_cmd_stack_list_variables): Ditto.
3674         * mi/mi-main.c: Delete #include "python/python-internal.h".
3675         Add #include "extension.h".
3676         (mi_cmd_list_features): Replace reference to python internal variable
3677         gdb_python_initialized with call to ext_lang_initialized_p.
3678
3679         * stack.c (backtrace_command_1): Update to use enum ext_lang_bt_status.
3680         Update to use enum ext_lang_frame_args.  Update to call
3681         apply_ext_lang_frame_filter.
3682         * python/py-framefilter.c (extract_sym): Update to use enum
3683         ext_lang_bt_status.
3684         (extract_value, py_print_type, py_print_value): Ditto.
3685         (py_print_single_arg, enumerate_args, enumerate_locals): Ditto.
3686         (py_mi_print_variables, py_print_locals, py_print_args): Ditto.
3687         (py_print_frame): Ditto.
3688         (gdbpy_apply_frame_filter): Renamed from apply_frame_filter.
3689         New arg extlang.  Update to use enum ext_lang_bt_status.
3690
3691         * top.c (gdb_init): Delete #ifdef HAVE_PYTHON call to
3692         finish_python_initialization.  Replace with call to
3693         finish_ext_lang_initialization.
3694
3695         * typeprint.c (do_free_global_table): Update to call
3696         free_ext_lang_type_printers.
3697         (create_global_typedef_table): Update to call
3698         start_ext_lang_type_printers.
3699         (find_global_typedef): Update to call apply_ext_lang_type_printers.
3700         * typeprint.h (struct ext_lang_type_printers): Add forward decl.
3701         (type_print_options): Change type of global_printers from "void *"
3702         to "struct ext_lang_type_printers *".
3703
3704         * value.c (preserve_values): Update to call preserve_ext_lang_values.
3705         * python/py-value.c: Remove #ifdef HAVE_PYTHON.
3706         (gdbpy_preserve_values): Renamed from preserve_python_values.
3707         New arg extlang.
3708         (!HAVE_PYTHON, preserve_python_values): Delete.
3709
3710         * utils.c (quit_flag): Delete, moved to extension.c.
3711         (clear_quit_flag, set_quit_flag, check_quit_flag): Delete, moved to
3712         extension.c.
3713
3714         * eval.c: Delete #include "python/python.h".
3715         * main.c: Delete #include "python/python.h".
3716
3717         * defs.h: Update comment.
3718
3719 2014-02-06  Joel Brobecker  <brobecker@adacore.com>
3720
3721         GDB 7.7 released.
3722
3723 2014-02-05  Mark Kettenis  <kettenis@gnu.org>
3724
3725         * c-exp.y (YYPRINT, c_print_token): Only define if YYBISON is
3726         defined.
3727
3728 2014-02-05  Yao Qi  <yao@codesourcery.com>
3729
3730         * remote.c (remote_pass_signals): Remove local 'buf' and use
3731         rs->buf.
3732         (remote_program_signals): Likewise.
3733
3734 2014-02-05  Yao Qi  <yao@codesourcery.com>
3735
3736         * ctf.c: Include "inferior.h" and "gdbthread.h".
3737         (CTF_PID): A new macro.
3738         (ctf_open): Call inferior_appeared and add_thread_silent.
3739         (ctf_close): Call exit_inferior_silent and set inferior_ptid.
3740         (ctf_thread_alive): New function.
3741         (init_ctf_ops): Install ctf_thread_alive to to_thread_alive.
3742
3743 2014-02-05  Yao Qi  <yao@codesourcery.com>
3744
3745         Revert this patch:
3746
3747         2013-05-24  Yao Qi  <yao@codesourcery.com>
3748
3749         * tracepoint.c (TFILE_PID): Remove.
3750         (tfile_open): Don't add thread and inferior.
3751         (tfile_close): Don't set 'inferior_ptid'.  Don't call
3752         exit_inferior_silent.
3753         (tfile_thread_alive): Remove.
3754         (init_tfile_ops): Don't set field 'to_thread_alive' of
3755         tfile_ops.
3756
3757 2014-02-04  Christian Eggers  <ceggers@gmx.de>  (tiny change)
3758
3759         * remote.c (remote_start_remote): Call remote_check_symbols even
3760         if only symbol-file (not file) has been given.
3761
3762 2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>
3763
3764         * gdbarch.sh (skip_entrypoint): New callback.
3765         * gdbarch.c, gdbarch.h: Regenerate.
3766         * symtab.c (skip_prologue_sal): Call gdbarch_skip_entrypoint.
3767         * infrun.c (fill_in_stop_func): Likewise.
3768         * ppc-linux-tdep.c: Include "elf/ppc64.h".
3769         (ppc_elfv2_elf_make_msymbol_special): New function.
3770         (ppc_elfv2_skip_entrypoint): Likewise.
3771         (ppc_linux_init_abi): Install them for ELFv2.
3772
3773 2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>
3774
3775         * ppc-sysv-tdep.c (ppc64_aggregate_candidate): New routine.
3776         (ppc64_elfv2_abi_homogeneous_aggregate): Likewise.
3777         (ppc64_sysv_abi_push_param): Handle ELFv2 homogeneous structs.
3778         (ppc64_sysv_abi_return_value): Likewise.  Also, handle small
3779         structures returned in GPRs.
3780
3781 2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>
3782
3783         * ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): Use correct
3784         offset to the stack parameter list for the ELFv2 ABI.
3785
3786 2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>
3787
3788         * ppc-linux-tdep.c (ppc_linux_init_abi): Only call
3789         set_gdbarch_convert_from_func_ptr_addr and
3790         set_gdbarch_elf_make_msymbol_special for ELFv1.
3791         * ppc-sysv-tdep.c (ppc64_sysv_abi_push_param): Only handle
3792         function descriptors on ELFv1.
3793         (ppc64_sysv_abi_push_dummy_call): Likewise.  On ELFv2,
3794         set up r12 at function entry.
3795
3796 2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>
3797
3798         * ppc-tdep.h (enum powerpc_elf_abi): New data type.
3799         (struct gdbarch_tdep): New member elf_abi.
3800
3801         * rs6000-tdep.c: Include "elf/ppc64.h".
3802         (rs6000_gdbarch_init): Detect ELF ABI version.
3803
3804 2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>
3805
3806         * ppc-sysv-tdep.c (ppc64_sysv_abi_push_freg): Use correct order
3807         within a register pair holding a DFP 128-bit value on little-endian.
3808         (ppc64_sysv_abi_return_value_base): Likewise.
3809         * rs6000-tdep.c (dfp_pseudo_register_read): Likewise.
3810         (dfp_pseudo_register_write): Likewise.
3811
3812 2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>
3813
3814         * ppc-sysv-tdep.c (ppc64_sysv_abi_push_freg): Use correct
3815         offset on little-endian when passing _Decimal32.
3816         (ppc64_sysv_abi_return_value_base): Likewise for return values.
3817
3818 2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>
3819
3820         * rs6000-tdep.c (efpr_pseudo_register_read): Use correct offset
3821         of the overlapped FP register within the VSX register on little-
3822         endian platforms.
3823         (efpr_pseudo_register_write): Likewise.
3824
3825 2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>
3826
3827         * ppc-sysv-tdep.c (ppc64_sysv_abi_push_val): Use correct
3828         offset on little-endian when passing small structures.
3829
3830 2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>
3831
3832         * ppc-sysv-tdep.c (get_decimal_float_return_value): Update comment.
3833         (struct ppc64_sysv_argpos): New data structure.
3834         (ppc64_sysv_abi_push_float): Remove.
3835         (ppc64_sysv_abi_push_val): New function.
3836         (ppc64_sysv_abi_push_integer): Likewise.
3837         (ppc64_sysv_abi_push_freg): Likewise.
3838         (ppc64_sysv_abi_push_vreg): Likewise.
3839         (ppc64_sysv_abi_push_param): Likewise.
3840         (ppc64_sysv_abi_push_dummy_call): Refactor to use those new routines.
3841         (ppc64_sysv_abi_return_value_base): New function.
3842         (ppc64_sysv_abi_return_value): Refactor to use it.
3843
3844 2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>
3845
3846         * NEWS: Document new target powerpc64le-*-linux*.
3847
3848 2014-02-04  Mark Kettenis  <kettenis@gnu.org>
3849
3850         * sparc64obsd-tdep.c (sparc64obsd_gregset): New variable.
3851         (sparc64obsd_supply_gregset): Handle registers sets used in ELF
3852         core dumps.
3853         (sparc64obsd_init_abi): Adjust minimum size of the general purpose
3854         register set used in ELF core dumps.  Add floating-point register set.
3855
3856 2014-02-03  Kevin Buettner  <kevinb@redhat.com>
3857
3858         * mn10300-tdep.c (mn10300_dwarf2_reg_to_regnum): Rewrite
3859         dwarf2_to_gdb[] table using symbolic constants.  Adjust
3860         penultimate entry from number representing the PC register
3861         to symbolic constant representing the MDR register.  Add
3862         constant for the PC register to the end of the table.
3863
3864 2014-02-03  Mark Kettenis  <kettenis@gnu.org>
3865
3866         * bsd-kvm.c: Include <sys/param.h>
3867
3868 2014-02-03  Mark Kettenis  <kettenis@gnu.org>
3869
3870         * sparc64nbsd-nat.c (sparc64nbsd_supply_fpregset): Fix prototype.
3871
3872 2014-01-31  Joel Brobecker  <brobecker@adacore.com>
3873
3874         * ada-lang.h (clear_ada_sym_cache): Delete.
3875
3876 2014-01-30  Ulrich Weigand  <uweigand@de.ibm.com>
3877
3878         * auxv.c (fprint_target_auxv): Handle AT_HWCAP2.
3879
3880 2014-01-29  Jose E. Marchesi  <jose.marchesi@oracle.com>
3881
3882         * sparc64-linux-tdep.c (sparc64_linux_step_trap): Get PC from
3883           the sigreturn register save area only if the syscall is
3884           sigreturn.
3885
3886 2014-01-29  Joel Brobecker  <brobecker@adacore.com>
3887
3888         * valops.c (value_slice): Minor reformatting.
3889
3890 2014-01-28  Ulrich Weigand  <uweigand@de.ibm.com>
3891
3892         * ppc64-tdep.c (ppc64_standard_linkage7): Fix typo.
3893
3894 2014-01-28  Joel Brobecker  <brobecker@adacore.com>
3895
3896         * ada-lang.c (maint_set_ada_cmdlist, maint_show_ada_cmdlist):
3897         New static globals.
3898         (maint_set_ada_cmd, maint_show_ada_cmd): New functions.
3899         (ada_ignore_descriptive_types_p): New static global.
3900         (find_parallel_type_by_descriptive_type): Return immediately
3901         if ada_ignore_descriptive_types_p is set.
3902         (_initialize_ada_language): Register new commands "maintenance
3903         set ada", "maintenance show ada", "maintenance set ada
3904         ignore-descriptive-types" and "maintenance show ada
3905         ignore-descriptive-types".
3906         * NEWS: Add entry for new "maint ada set/show
3907         ignore-descriptive-types" commands.
3908
3909 2014-01-27  Markus Metzger  <markus.t.metzger@intel.com>
3910
3911         * record-btrace.c (record_btrace_close): Call btrace_teardown
3912         for all threads.
3913
3914 2014-01-27  Joel Brobecker  <brobecker@adacore.com>
3915
3916         * ada-lang.c: Remove "#ifdef UI_OUT" condition for including
3917         "ui-out.h".
3918
3919 2014-01-27  Joel Brobecker  <brobecker@adacore.com>
3920
3921         * ada-typeprint (type_is_full_subrange_of_target_type):
3922         New function.
3923         (print_range): Add parameter bounds_prefered_p.  If not set,
3924         try printing range types using the name of their base type.
3925         (print_range_type): Add parameter bounds_prefered_p.
3926         Use it in call to print_range.
3927         (print_array_type, ada_print_type): Update calls to print_range
3928         and print_range_type.
3929
3930 2014-01-27  Joel Brobecker  <brobecker@adacore.com>
3931
3932         * ada-typeprint.c (print_array_type, print_choices, print_range)
3933         (print_range_bound, print_dynamic_range_bound, print_range_type):
3934         Remove declaration.
3935
3936 2014-01-27  Joel Brobecker  <brobecker@adacore.com>
3937
3938         * ada-typeprint.c (print_range): Add missing empty line
3939         after local declaration.
3940
3941 2014-01-27  Joel Brobecker  <brobecker@adacore.com>
3942
3943         * ada-valprint.c (print_optional_low_bound): Get index_type's
3944         target type for as long as it is a TYPE_CODE_RANGE.
3945
3946 2014-01-27  Joel Brobecker  <brobecker@adacore.com>
3947
3948         * procfs.c (procfs_make_note_section): Remove assertion and
3949         associated comment.
3950
3951 2014-01-24  Yao Qi  <yao@codesourcery.com>
3952
3953         * remote.c (remote_read_bytes): Change type of len to ULONGEST.
3954         * corelow.c (get_core_siginfo): Likewise.
3955
3956 2014-01-24  Yao Qi  <yao@codesourcery.com>
3957
3958         * remote.c (remote_write_bytes_aux): Change type of 'len' to
3959         ULONGEST.  Don't check 'len' is negative.
3960         (remote_write_bytes):  Change type of 'len' to ULONGEST.
3961
3962 2014-01-23  Tom Tromey  <tromey@redhat.com>
3963
3964         PR python/16485:
3965         * python/lib/gdb/FrameDecorator.py: (FrameVars.fetch_frame_args):
3966         Handle exception from frame.block.
3967         (FrameVars.fetch_frame_locals): Likewise.
3968
3969 2014-01-23  Tom Tromey  <tromey@redhat.com>
3970
3971         PR python/16487:
3972         * python/py-framefilter.c (py_print_frame): Don't call Py_DECREF
3973         on a NULL pointer.  Move "goto error" to correct place.
3974
3975 2014-01-23  Tom Tromey  <tromey@redhat.com>
3976
3977         PR python/16491:
3978         * python/py-framefilter.c (apply_frame_filter): Call
3979         ensure_python_env after computing gdbarch.
3980
3981 2014-01-23  Yao Qi  <yao@codesourcery.com>
3982
3983         * target.c (raw_memory_xfer_partial): Change argument type
3984         from void * to gdb_byte *.
3985         (memory_xfer_partial_1, memory_xfer_partial): Likewise.
3986
3987 2014-01-22  Doug Evans  <dje@google.com>
3988
3989         New gdbserver option --debug-format=timestamp.
3990         * NEWS: Mention it.
3991
3992 2014-01-22  Andreas Arnez  <arnez@vnet.linux.ibm.com>
3993
3994         * syscalls/s390x-linux.xml: New file.
3995         * syscalls/s390-linux.xml: New file.
3996         * s390-linux-tdep.c (XML_SYSCALL_FILENAME_S390): New macro.
3997         (XML_SYSCALL_FILENAME_S390X): Likewise.
3998         (op_svc): New enum value for SVC opcode.
3999         (s390_sigtramp_frame_sniffer): Replace literal by 'op_svc'.
4000         (s390_linux_get_syscall_number): New function.
4001         (s390_gdbarch_init): Register '*get_syscall_number' and the
4002         syscall xml file name.
4003         * data-directory/Makefile.in (SYSCALLS_FILES): Add
4004         "s390-linux.xml" and "s390x-linux.xml".
4005         * NEWS: Announce new feature.
4006
4007 2014-01-22  Baruch Siach  <baruch@tkos.co.il>
4008
4009         * xtensa-tdep.h (xtensa_elf_greg_t): Change type to uint32_t.
4010
4011 2014-01-22  Pedro Alves  <palves@redhat.com>
4012
4013         * xtensa-config.c: Include defs.h.
4014
4015 2014-01-22  Joel Brobecker  <brobecker@adacore.com>
4016
4017         * common/common-utils.h: Add "ARI:" comment beside __func__
4018         reference.
4019
4020 2014-01-22  Joel Brobecker  <brobecker@adacore.com>
4021
4022         * common/common-utils.h (FUNCTION_NAME): Expand the macro's
4023         documentation a bit.
4024
4025 2014-01-21  Roland McGrath  <mcgrathr@google.com>
4026
4027         * configure.ac: Call AM_PROG_INSTALL_STRIP.
4028         * configure: Regenerate.
4029         * aclocal.m4: Regenerate.
4030         * Makefile.in (install_sh, INSTALL_STRIP_PROGRAM, STRIP):
4031         New substituted variables.
4032         (install-strip): New target.
4033         (INSTALL_SCRIPT): New substituted variable.
4034         (FLAGS_TO_PASS): Add it.
4035         (install-only): Use $(INSTALL_SCRIPT) rather than
4036         $(INSTALL_PROGRAM) for gcore.
4037
4038 2014-01-20  Tom Tromey  <tromey@redhat.com>
4039
4040         * cli/cli-decode.h (struct cmd_list_element): Move all bitfields
4041         together.
4042
4043 2014-01-20  Tom Tromey  <tromey@redhat.com>
4044
4045         * cli/cli-decode.c (add_cmd, deprecate_cmd, add_alias_cmd)
4046         (add_setshow_cmd_full, delete_cmd, lookup_cmd_1)
4047         (deprecated_cmd_warning, complete_on_cmdlist): Update.
4048         * cli/cli-decode.h (CMD_DEPRECATED, DEPRECATED_WARN_USER)
4049         (MALLOCED_REPLACEMENT, DOC_ALLOCATED): Remove.
4050         (struct cmd_list_element) <flags>: Remove.
4051         <cmd_deprecated, deprecated_warn_user, malloced_replacement,
4052         doc_allocated>: New fields.
4053         <hook_in, allow_unknown, abbrev_flag, type, var_type>: Now
4054         bitfields.
4055         * maint.c (maintenance_do_deprecate): Update.
4056         * top.c (execute_command): Update.
4057
4058 2014-01-20  Baruch Siach  <baruch@tkos.co.il>
4059
4060         * xtensa-linux-nat.c: Include asm/ptrace.h.
4061
4062 2014-01-17  Iain Buclaw  <ibuclaw@gdcproject.org>
4063
4064         * Makefile.in (SFILES): Add d-support.c.
4065         (COMMON_OBS): Add d-support.o.
4066         * d-lang.h (d_parse_symbol): Add comment, now defined in
4067         d-support.c.
4068         * d-lang.c (parse_call_convention)
4069         (parse_attributes, parse_function_types)
4070         (parse_function_args, parse_type, parse_identifier)
4071         (call_convention_p, d_parse_symbol): Move functions to ...
4072         * d-support.c: ... New file.
4073
4074 2014-01-17  Iain Buclaw  <ibuclaw@gdcproject.org>
4075
4076         * d-lang.h (d_parse_symbol): Add declaration.
4077         * d-lang.c (extract_identifiers)
4078         (extract_type_info): Remove functions.
4079         (parse_call_convention, parse_attributes)
4080         (parse_function_types, parse_function_args)
4081         (parse_type, parse_identifier, call_convention_p)
4082         (d_parse_symbol): New functions.
4083         (d_demangle): Use d_parse_symbol to demangle D symbols.
4084
4085 2014-01-17  Iain Buclaw  <ibuclaw@gdcproject.org>
4086
4087         * d-lang.h (struct builtin_d_type): New data type.
4088         (builtin_d_type): Add declaration.
4089         * d-lang.c (d_language_arch_info, build_d_types)
4090         (builtin_d_type): New functions.
4091         (enum d_primitive_types): New data type.
4092         (d_language_defn): Change c_language_arch_info to
4093         d_language_arch_info.
4094         (d_type_data): New static variable.
4095         (_initialize_d_language): Initialize d_type_data.
4096
4097 2014-01-17  Iain Buclaw  <ibuclaw@gdcproject.org>
4098
4099         * d-lang.h (d_main_name): Add declaration.
4100         * d-lang.c (d_main_name): New function.
4101         * symtab.c (find_main_name): Add call to d_main_name.
4102
4103 2014-01-17  Iain Buclaw  <ibuclaw@gdcproject.org>
4104
4105         * d-lang.c (d_language_defn): Change macro_expansion_c to
4106         macro_expansion_no.
4107
4108 2014-01-17  Iain Buclaw  <ibuclaw@gdcproject.org>
4109
4110         * MAINTAINERS: Add myself as a write-after-approval maintainer.
4111
4112 2014-01-17  Sergio Durigan Junior  <sergiodj@redhat.com>
4113
4114         * breakpoint.c (insert_bp_location): Add "volatile" keyword to "struct
4115         gdb_exception" declaration.
4116         * remote.c (getpkt_or_notif_sane): Likewise.
4117
4118 2014-01-17  Doug Evans  <dje@google.com>
4119
4120         * common/gdb_vecs.c (delim_string_to_char_ptr_vec_append): New
4121         function, contents of dirnames_to_char_ptr_vec_append moved here.
4122         (delim_string_to_char_ptr_vec): New function.
4123         (dirnames_to_char_ptr_vec_append): Rewrite.
4124         * common/gdb_vecs.h (delim_string_to_char_ptr_vec): Declare.
4125
4126 2014-01-17  Doug Evans  <dje@google.com>
4127
4128         * common/common-utils.h (FUNCTION_NAME): Renamed from ASSERT_FUNCTION,
4129         and moved here ...
4130         * common/gdb_assert.h (ASSERT_FUNCTION): ... from here.
4131         #include "common-utils.h".
4132         (gdb_assert, gdb_assert_fail, gdb_assert_not_reached): Update.
4133         * common/vec.h (VEC_ASSERT_PASS): Update.
4134         * darwin-nat.h: Replace #include of gdb_assert.h with common-utils.h.
4135         (MACH_CHECK_ERROR): Update.
4136
4137 2014-01-17  Simon Marchi  <simon.marchi@ericsson.com>
4138
4139         * gdbarch.sh (gdbarch_address_class_name_to_type_flags): Add
4140         comments.
4141         * gdbarch.h: Regenerate.
4142
4143 2014-01-16  Tom Tromey  <tromey@redhat.com>
4144
4145         * value.c (struct value) <regnum>: Move earlier.
4146
4147 2014-01-16  Tom Tromey  <tromey@redhat.com>
4148
4149         * remote.c (extended_remote_create_inferior): Rename from
4150         extended_remote_create_inferior_1.  Add "ops" argument.  Remove
4151         old implementation.
4152
4153 2014-01-16  Pedro Alves  <palves@redhat.com>
4154
4155         * s390-linux-tdep.c (s390_frame_unwind_cache): Swallow
4156         NOT_AVAILABLE_ERROR errors while parsing the prologue or reading
4157         the backchain.
4158
4159 2014-01-16  Doug Evans  <dje@google.com>
4160
4161         * dwarf2read.c (open_and_init_dwp_file): Fix typo in comment.
4162
4163 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
4164
4165         * btrace.h (btrace_thread_flag): New.
4166         (struct btrace_thread_info) <flags>: New.
4167         * record-btrace.c (record_btrace_resume_thread)
4168         (record_btrace_find_thread_to_move, btrace_step_no_history)
4169         (btrace_step_stopped, record_btrace_start_replaying)
4170         (record_btrace_step_thread, record_btrace_decr_pc_after_break)
4171         (record_btrace_find_resume_thread): New.
4172         (record_btrace_resume, record_btrace_wait): Extend.
4173         (record_btrace_can_execute_reverse): New.
4174         (record_btrace_open): Fail in non-stop mode.
4175         (record_btrace_set_replay): Split into this, ...
4176         (record_btrace_stop_replaying): ... this, ...
4177         (record_btrace_clear_histories): ... and this.
4178         (init_record_btrace_ops): Init to_can_execute_reverse.
4179         * NEWS: Announce it.
4180
4181 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
4182
4183         * target.h (struct target_ops) <to_decr_pc_after_break>: New.
4184         (forward_target_decr_pc_after_break)
4185         (target_decr_pc_after_break): New.
4186         * target.c (forward_target_decr_pc_after_break)
4187         (target_decr_pc_after_break): New.
4188         * aix-thread.c (aix_thread_wait): Call target_decr_pc_after_break
4189         instead of gdbarch_decr_pc_after_break.
4190         * darwin-nat.c (cancel_breakpoint): Call target_decr_pc_after_break
4191         instead of gdbarch_decr_pc_after_break.
4192         * infrun.c (adjust_pc_after_break): Call target_decr_pc_after_break
4193         instead of gdbarch_decr_pc_after_break.
4194         * linux-nat.c (cancel_breakpoint): Call target_decr_pc_after_break
4195         instead of gdbarch_decr_pc_after_break.
4196         * linux-thread-db.c (check_event): Call target_decr_pc_after_break
4197         instead of gdbarch_decr_pc_after_break.
4198         * record-full.c (record_full_wait_1): Call target_decr_pc_after_break
4199         instead of gdbarch_decr_pc_after_break.
4200
4201 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
4202
4203         * btrace.c: Include regcache.h.
4204         (btrace_add_pc): New.
4205         (btrace_enable): Call btrace_add_pc.
4206         (btrace_is_empty): New.
4207         * btrace.h (btrace_is_empty): New.
4208         * record-btrace.c (require_btrace, record_btrace_info): Call
4209         btrace_is_empty.
4210
4211 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
4212
4213         * common/linux-btrace.c (perf_event_read_bts, linux_read_btrace):
4214         Support delta reads.
4215         (linux_disable_btrace): Change return type.
4216         * common/linux-btrace.h (linux_read_btrace): Change parameters
4217         and return type to allow error reporting.  Update users.
4218         (linux_disable_btrace): Change return type.  Update users.
4219         * common/btrace-common.h (btrace_read_type) <BTRACE_READ_DELTA>:
4220         New.
4221         (btrace_error): New.
4222         (btrace_block) <begin>: Comment on BEGIN == 0.
4223         * btrace.c (btrace_compute_ftrace): Start from the end of
4224         the current trace.
4225         (btrace_stitch_trace, btrace_clear_history): New.
4226         (btrace_fetch): Read delta trace, return if replaying.
4227         (btrace_clear): Move clear history code to btrace_clear_history.
4228         (parse_xml_btrace): Throw an error if parsing failed.
4229         * target.h (struct target_ops) <to_read_btrace>: Change parameters
4230         and return type to allow error reporting.
4231         (target_read_btrace): Change parameters and return type to allow
4232         error reporting.
4233         * target.c (target_read_btrace): Update.
4234         * remote.c (remote_read_btrace): Support delta reads.  Pass
4235         errors on.
4236         * NEWS: Announce it.
4237
4238 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
4239
4240         * record.h (record_btrace_frame_unwind)
4241         (record_btrace_tailcall_frame_unwind): New declarations.
4242         * dwarf2-frame: Include record.h
4243         (dwarf2_frame_cfa): Throw an error for btrace frames.
4244         * record-btrace.c: Include hashtab.h.
4245         (btrace_get_bfun_name): New.
4246         (btrace_call_history): Call btrace_get_bfun_name.
4247         (struct btrace_frame_cache): New.
4248         (bfcache): New.
4249         (bfcache_hash, bfcache_eq, bfcache_new): New.
4250         (btrace_get_frame_function): New.
4251         (record_btrace_frame_unwind_stop_reason): Allow unwinding.
4252         (record_btrace_frame_this_id): Compute own id.
4253         (record_btrace_frame_prev_register): Provide PC, throw_error
4254         for all other registers.
4255         (record_btrace_frame_sniffer): Detect btrace frames.
4256         (record_btrace_tailcall_frame_sniffer): New.
4257         (record_btrace_frame_dealloc_cache): New.
4258         (record_btrace_frame_unwind): Add new functions.
4259         (record_btrace_tailcall_frame_unwind): New.
4260         (_initialize_record_btrace): Allocate cache.
4261         * btrace.c (btrace_clear): Call reinit_frame_cache.
4262         * NEWS: Announce it.
4263
4264 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
4265
4266         * record-btrace.c (record_btrace_set_replay)
4267         (record_btrace_goto_begin, record_btrace_goto_end)
4268         (record_btrace_goto): New.
4269         (init_record_btrace_ops): Initialize them.
4270         * NEWS: Announce it.
4271
4272 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
4273
4274         * record-btrace.c (record_btrace_find_new_threads)
4275         (record_btrace_thread_alive): New.
4276         (init_record_btrace_ops): Initialize to_find_new_threads and
4277         to_thread_alive.
4278
4279 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
4280
4281         * record-btrace.c (record_btrace_resume): New.
4282         (record_btrace_wait): New.
4283         (init_record_btrace_ops): Initialize to_wait and to_resume.
4284
4285 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
4286
4287         * record-btrace.c (record_btrace_xfer_partial)
4288         (record_btrace_insert_breakpoint, record_btrace_remove_breakpoint)
4289         (record_btrace_allow_memory_access): New.
4290         (init_record_btrace_ops): Initialize new methods.
4291         * target.c (raw_memory_xfer_partial): Bail out if target reports
4292         that this memory is not available.
4293
4294 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
4295
4296         * target.h (target_ops) <to_insert_breakpoint>
4297         <to_remove_breakpoint>: Add target_ops parameter.
4298         (forward_target_insert_breakpoint): New.
4299         (forward_target_remove_breakpoint): New.
4300         (memory_remove_breakpoint, memory_insert_breakpoint):
4301         Add target_ops parameter.
4302         * target.c (target_insert_breakpoint): Split into this and ...
4303         (forward_target_insert_breakpoint): ... this.
4304         (target_remove_breakpoint): Split into this and ...
4305         (forward_target_remove_breakpoint): ... this.
4306         (debug_to_insert_breakpoint): Add target_ops parameter.
4307         Call forward_target_insert_breakpoint.
4308         (debug_to_remove_breakpoint): Add target_ops parameter.
4309         Call forward_target_remove_breakpoint.
4310         (update_current_target): Do not inherit or default to_insert_breakpoint
4311         and to_remove_breakpoint.
4312         * corelow.c (ignore): Add target_ops parameter.
4313         * exec.c (ignore): Add target_ops parameter.
4314         * mem-break.c (memory_insert_breakpoint, memory_remove_breakpoint):
4315         Add target_ops parameter.
4316         * monitor.c (monitor_insert_breakpoint, monitor_remove_breakpoint):
4317         Add target_ops parameter.
4318         * nto-procfs.c (procfs_insert_breakpoint, procfs_remove_breakpoint):
4319         Add target_ops parameter.
4320         * record-full.c (record_full_beneath_to_insert_breakpoint)
4321         (record_full_beneath_to_remove_breakpoint, tmp_to_insert_breakpoint)
4322         (tmp_to_remove_breakpoint, record_full_insert_breakpoint)
4323         (record_full_remove_breakpoint, record_full_core_insert_breakpoint)
4324         (record_full_core_remove_breakpoint): Add target_ops parameter.
4325         Update users.
4326         (record_full_beneath_to_insert_breakpoint_ops)
4327         (record_full_beneath_to_remove_breakpoint_ops)
4328         (tmp_to_insert_breakpoint_ops, tmp_to_remove_breakpoint_ops): New.
4329         (record_full_open): Initialize tmp_to_insert_breakpoint_ops,
4330         tmp_to_remove_breakpoint_ops,
4331         record_full_beneath_to_insert_breakpoint_ops, and
4332         record_full_beneath_to_remove_breakpoint_ops.
4333         * remote-m32r-sdi.c (m32r_insert_breakpoint)
4334         (m32r_remove_breakpoint): Add target_ops parameter.
4335         * remote-mips.c (mips_insert_breakpoint, mips_remove_breakpoint):
4336         Add target_ops parameter.
4337         * remote.c (remote_insert_breakpoint, remote_remove_breakpoint):
4338         Add target_ops parameter.
4339
4340 2014-01-16  Jan Kratochvil  <jan.kratochvil@redhat.com>
4341             Markus Metzger  <markus.t.metzger@intel.com>
4342
4343         * record-btrace.c: Include frame-unwind.h.
4344         (record_btrace_frame_unwind_stop_reason)
4345         (record_btrace_frame_this_id, record_btrace_frame_prev_register)
4346         (record_btrace_frame_sniffer, record_btrace_frame_unwind):
4347         New.
4348         (init_record_btrace_ops): Install it.
4349
4350 2014-01-16  Jan Kratochvil  <jan.kratochvil@redhat.com>
4351
4352         * frame.c (get_frame_unwind_stop_reason): Unconditionally call
4353         get_prev_frame_1.
4354
4355 2014-01-16  Jan Kratochvil  <jan.kratochvil@redhat.com>
4356
4357         * dwarf2-frame.c (dwarf2_frame_cfa): Move UNWIND_UNAVAILABLE check
4358         earlier.
4359
4360 2014-01-16  Jan Kratochvil  <jan.kratochvil@redhat.com>
4361
4362         * frame-unwind.c: Include target.h.
4363         (frame_unwind_try_unwinder): New function with code from ...
4364         (frame_unwind_find_by_frame): ... here.  New variable
4365         unwinder_from_target, call also target_get_unwinder)
4366         (target_get_tailcall_unwinder, and frame_unwind_try_unwinder for it.
4367         * target.c (target_get_unwinder, target_get_tailcall_unwinder): New.
4368         * target.h (struct target_ops): New fields to_get_unwinder and
4369         to_get_tailcall_unwinder.
4370         (target_get_unwinder, target_get_tailcall_unwinder): New declarations.
4371
4372 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
4373
4374         * record-btrace.c (record_btrace_fetch_registers)
4375         (record_btrace_store_registers)
4376         (record_btrace_to_prepare_to_store): New.
4377         (init_record_btrace_ops): Add the above.
4378
4379 2014-01-16  Tom Tromey  <tromey@redhat.com>
4380
4381         * windows-nat.c (windows_prepare_to_store): Add 'self' argument.
4382         * target.h (struct target_ops) <to_prepare_to_store>: Add
4383         argument.
4384         (target_prepare_to_store): Add argument.
4385         * target.c (debug_to_prepare_to_store): Add argument.
4386         (update_current_target): Update.
4387         * remote.c (remote_prepare_to_store): Add 'self' argument.
4388         * remote-sim.c (gdbsim_prepare_to_store): Add 'self' argument.
4389         * remote-mips.c (mips_prepare_to_store): Add 'self' argument.
4390         * remote-m32r-sdi.c (m32r_prepare_to_store): Add 'self' argument.
4391         * record-full.c (record_full_core_prepare_to_store): Add 'self'
4392         argument.
4393         * ravenscar-thread.c (ravenscar_prepare_to_store): Add argument.
4394         * nto-procfs.c (procfs_prepare_to_store): Add 'self' argument.
4395         * monitor.c (monitor_prepare_to_store): Add 'self' argument.
4396         * inf-child.c (inf_child_prepare_to_store): Add 'self' argument.
4397         * go32-nat.c (go32_prepare_to_store): Add 'self' argument.
4398
4399 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
4400
4401         * btrace.h (replay) <replay>: New.
4402         (btrace_is_replaying): New.
4403         * btrace.c (btrace_clear): Free replay iterator.
4404         (btrace_is_replaying): New.
4405         * record-btrace.c (record_btrace_is_replaying): New.
4406         (record_btrace_info): Print insn number if replaying.
4407         (record_btrace_insn_history): Start at replay position.
4408         (record_btrace_call_history): Start at replay position.
4409         (init_record_btrace_ops): Init to_record_is_replaying.
4410
4411 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
4412
4413         * record-btrace.c (record_btrace_insn_history_range): Include
4414         end.
4415         (record_btrace_insn_history_from): Adjust range.
4416         (record_btrace_call_history_range): Include
4417         end.
4418         (record_btrace_call_history_from): Adjust range.
4419         * NEWS: Announce changes.
4420
4421 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
4422
4423         * record.h (enum record_print_flag)
4424         <record_print_indent_calls>: New.
4425         * record.c (get_call_history_modifiers): Recognize /c modifier.
4426         (_initialize_record): Document /c modifier.
4427         * record-btrace.c (btrace_call_history): Add btinfo parameter.
4428         Reorder fields.  Optionally indent the function name.  Update
4429         all users.
4430         * NEWS: Announce changes.
4431
4432 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
4433
4434         * common/linux-btrace.c (linux_enable_btrace): Enlarge buffer.
4435
4436 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
4437
4438         * btrace.c (ftrace_new_function): Start counting at one.
4439         * record-btrace.c (record_btrace_info): Adjust number of calls
4440         and insns.
4441         * NEWS: Announce it.
4442
4443 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
4444
4445         * record-btrace.c (btrace_call_history_insn_range): Print
4446         insn range as [begin, end].
4447
4448 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
4449
4450         * btrace.h (struct btrace_func_link): New.
4451         (enum btrace_function_flag): New.
4452         (struct btrace_inst): Rename to ...
4453         (struct btrace_insn): ...this. Update all users.
4454         (struct btrace_func) <ibegin, iend>: Remove.
4455         (struct btrace_func_link): New.
4456         (struct btrace_func): Rename to ...
4457         (struct btrace_function): ...this. Update all users.
4458         (struct btrace_function) <segment, flow, up, insn, insn_offset)
4459         (number, level, flags>: New.
4460         (struct btrace_insn_iterator): Rename to ...
4461         (struct btrace_insn_history): ...this.
4462         Update all users.
4463         (struct btrace_insn_iterator, btrace_call_iterator): New.
4464         (struct btrace_target_info) <btrace, itrace, ftrace>: Remove.
4465         (struct btrace_target_info) <begin, end, level>
4466         <insn_history, call_history>: New.
4467         (btrace_insn_get, btrace_insn_number, btrace_insn_begin)
4468         (btrace_insn_end, btrace_insn_prev, btrace_insn_next)
4469         (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get)
4470         (btrace_call_number, btrace_call_begin, btrace_call_end)
4471         (btrace_call_prev, btrace_call_next, btrace_call_cmp)
4472         (btrace_find_function_by_number, btrace_set_insn_history)
4473         (btrace_set_call_history): New.
4474         * btrace.c (btrace_init_insn_iterator)
4475         (btrace_init_func_iterator, compute_itrace): Remove.
4476         (ftrace_print_function_name, ftrace_print_filename)
4477         (ftrace_skip_file): Change
4478         parameter to const.
4479         (ftrace_init_func): Remove.
4480         (ftrace_debug): Use new btrace_function fields.
4481         (ftrace_function_switched): Also consider gaining and
4482         losing symbol information).
4483         (ftrace_print_insn_addr, ftrace_new_call, ftrace_new_return)
4484         (ftrace_new_switch, ftrace_find_caller, ftrace_new_function)
4485         (ftrace_update_caller, ftrace_fixup_caller, ftrace_new_tailcall):
4486         New.
4487         (ftrace_new_function): Move. Remove debug print.
4488         (ftrace_update_lines, ftrace_update_insns): New.
4489         (ftrace_update_function): Check for call, ret, and jump.
4490         (compute_ftrace): Renamed to ...
4491         (btrace_compute_ftrace): ...this. Rewritten to compute call
4492         stack.
4493         (btrace_fetch, btrace_clear): Updated.
4494         (btrace_insn_get, btrace_insn_number, btrace_insn_begin)
4495         (btrace_insn_end, btrace_insn_prev, btrace_insn_next)
4496         (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get)
4497         (btrace_call_number, btrace_call_begin, btrace_call_end)
4498         (btrace_call_prev, btrace_call_next, btrace_call_cmp)
4499         (btrace_find_function_by_number, btrace_set_insn_history)
4500         (btrace_set_call_history): New.
4501         * record-btrace.c (require_btrace): Use new btrace thread
4502         info fields.
4503         (record_btrace_info, btrace_insn_history)
4504         (record_btrace_insn_history, record_btrace_insn_history_range):
4505         Use new btrace thread info fields and new iterator.
4506         (btrace_func_history_src_line): Rename to ...
4507         (btrace_call_history_src_line): ...this. Use new btrace
4508         thread info fields.
4509         (btrace_func_history): Rename to ...
4510         (btrace_call_history): ...this. Use new btrace thread info
4511         fields and new iterator.
4512         (record_btrace_call_history, record_btrace_call_history_range):
4513         Use new btrace thread info fields and new iterator.
4514
4515 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
4516
4517         * frame.h (frame_id_build_unavailable_stack_special): New.
4518         * frame.c (frame_id_build_unavailable_stack_special): New.
4519
4520 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
4521
4522         * amd64-tdep.c (amd64_classify_insn_at, amd64_insn_is_call)
4523         (amd64_insn_is_ret, amd64_insn_is_jump, amd64_jmp_p): New.
4524         (amd64_init_abi): Add insn_is_call, insn_is_ret, and insn_is_jump
4525         to gdbarch.
4526         * i386-tdep.c (i386_insn_is_call, i386_insn_is_ret)
4527         (i386_insn_is_jump, i386_jmp_p): New.
4528         (i386_gdbarch_init): Add insn_is_call, insn_is_ret, and
4529         insn_is_jump to gdbarch.
4530         * gdbarch.sh (insn_is_call, insn_is_ret, insn_is_jump): New.
4531         * gdbarch.h: Regenerated.
4532         * gdbarch.c: Regenerated.
4533         * arch-utils.h (default_insn_is_call, default_insn_is_ret)
4534         (default_insn_is_jump): New.
4535         * arch-utils.c (default_insn_is_call, default_insn_is_ret)
4536         (default_insn_is_jump): New.
4537
4538 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
4539
4540         * common/btrace-common.h (btrace_read_type) <btrace_read_all>:
4541         Change to ...
4542         (btrace_read_type) <BTRACE_READ_ALL>: ... this.  Update users.
4543         (btrace_read_type) <btrace_read_new>: Change to ...
4544         (btrace_read_type) <BTRACE_READ_NEW>: ... this.  Update users.
4545
4546 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
4547
4548         * common/linux-btrace.c (linux_read_btrace): Free trace from
4549         previous iteration.
4550
4551 2014-01-15  Doug Evans  <dje@google.com>
4552
4553         * dwarf2read.c (open_and_init_dwp_file): Use pulongest to print
4554         uint32_t.
4555
4556 2014-01-15  Tom Tromey  <tromey@redhat.com>
4557
4558         * dbxread.c (process_one_symbol): Use set_objfile_main_name.
4559         * dwarf2read.c (read_partial_die): Use set_objfile_main_name.
4560         * objfiles.c (get_objfile_bfd_data): Initialize language_of_main.
4561         (set_objfile_main_name): New function.
4562         * objfiles.h (struct objfile_per_bfd_storage) <name_of_main,
4563         language_of_main>: New fields.
4564         (set_objfile_main_name): Declare.
4565         * symtab.c (find_main_name): Loop over objfiles to find the main
4566         name and language.
4567         (set_main_name): Now static.
4568         (get_main_info): Add comment.
4569         * symtab.h (set_main_name): Don't declare.
4570
4571 2014-01-15  Tom Tromey  <tromey@redhat.com>
4572
4573         * symtab.c (main_progspace_key): New global.
4574         (struct main_info): New.
4575         (name_of_main, language_of_main): Remove.
4576         (get_main_info, main_info_cleanup): New function.
4577         (set_main_name, main_name, main_language): Use get_main_info.
4578         (_initialize_symtab): Initialize main_progspace_key.
4579
4580 2014-01-15  Tom Tromey  <tromey@redhat.com>
4581
4582         * dbxread.c (process_one_symbol): Update.
4583         * dwarf2read.c (read_partial_die): Update.
4584         * symfile.c (set_initial_language): Call main_language.
4585         * symtab.c (language_of_main): Now static.
4586         (set_main_name): Add 'lang' parameter.
4587         (find_main_name): Update.
4588         (main_language): New function.
4589         (symtab_observer_executable_changed): Update.
4590         * symtab.h (set_main_name): Update.
4591         (language_of_main): Remove.
4592         (main_language): Declare.
4593
4594 2014-01-15  Tom Tromey  <tromey@redhat.com>
4595
4596         * symfile.c (init_entry_point_info): Use new "initialized" field.
4597         Update.
4598         * objfiles.h (struct entry_point) <initialized>: New field.
4599         (struct objfile_per_bfd_storage) <ei>: New field, moved from...
4600         (struct objfile) <ei>: ...here.  Remove.
4601         * objfiles.c (entry_point_address_query): Update.
4602
4603 2014-01-15  Tom Tromey  <tromey@redhat.com>
4604
4605         * objfiles.c (entry_point_address_query): Relocate entry point
4606         address.
4607         (objfile_relocate1): Do not relocate entry point address.
4608         * objfiles.h (struct entry_info) <entry_point>: Update comment.
4609         <the_bfd_section_index>: New field.
4610         * symfile.c (init_entry_point_info): Find the entry point's
4611         section.
4612
4613 2014-01-15  Tom Tromey  <tromey@redhat.com>
4614
4615         * solib-frv.c (enable_break): Use entry_point_address_query.
4616
4617 2014-01-15  Omair Javaid  <omair.javaid@linaro.org>
4618
4619         * NEWS: Add note on improved process record-replay on
4620         arm*-linux* targets.
4621
4622 2014-01-15  Omair Javaid  <omair.javaid@linaro.org>
4623
4624         * arm-tdep.c (enum arm_record_result): New enum.
4625         (arm_record_unsupported_insn): New function.
4626         (arm_record_coproc_data_proc): Removed.
4627         (thumb2_record_ld_st_multiple): New function.
4628         (thumb2_record_ld_st_dual_ex_tbb): New function.
4629         (thumb2_record_data_proc_sreg_mimm): New function.
4630         (thumb2_record_ps_dest_generic): New function.
4631         (thumb2_record_branch_misc_cntrl): New function.
4632         (thumb2_record_str_single_data): New function.
4633         (thumb2_record_ld_mem_hints): New function.
4634         (thumb2_record_ld_word): New function.
4635         (thumb2_record_lmul_lmla_div): New function.
4636         (thumb2_record_decode_insn_handler): New function.
4637         (decode_insn): Add thumb32 instruction handlers.
4638
4639 2014-01-15  Omair Javaid  <omair.javaid@linaro.org>
4640
4641         * arm-linux-tdep.c: Include "record-full.h" and "linux-record.h".
4642         (struct arm_linux_record_tdep): Declare.
4643         (arm_canonicalize_syscall): New function.
4644         (arm_all_but_pc_registers_record): New function.
4645         (arm_linux_syscall_record): New function.
4646         (arm_linux_init_abi): Add syscall recording constructs.
4647         * arm-tdep.c (thumb_record_ldm_stm_swi): Update thumb syscall
4648         decoding.  (arm_record_coproc_data_proc): Update arm syscall
4649         decoding.
4650         * arm-tdep.h (struct gdbarch_tdep) <arm_swi_record>: Remove.
4651         <arm_syscall_record>: New field.
4652         * configure.tgt (arm*-*-linux*): Add linux-record.o to
4653         gdb_target_obs.
4654
4655 2014-01-15  Omair Javaid  <omair.javaid@linaro.org>
4656
4657         * arm-tdep.c (thumb_record_misc): Update to use sp as base
4658         register for push instruction recording.
4659
4660 2014-01-15  Omair Javaid  <omair.javaid@linaro.org>
4661
4662         * arm-tdep.c (thumb_record_misc): Update to correct logical
4663         error while recording ldm, ldmia and pop instructions.
4664
4665 2014-01-15  Omair Javaid  <omair.javaid@linaro.org>
4666
4667         * arm-tdep.c (struct arm_mem_r) <addr>: Change type to uint32_t.
4668
4669 2014-01-15  Pedro Alves  <palves@redhat.com>
4670
4671         * go32-nat.c (go32_open, go32_close, go32_attach, go32_detach)
4672         (go32_resume, go32_fetch_registers, store_register)
4673         (go32_store_registers, go32_prepare_to_store)
4674         (go32_xfer_memory, go32_files_info, go32_kill_inferior)
4675         (go32_create_inferior, go32_can_run, go32_terminal_init)
4676         (go32_terminal_inferior, go32_terminal_ours): Delete forward
4677         declarations.
4678
4679 2014-01-15  Tom Tromey  <tromey@redhat.com>
4680
4681         * target.h (async_callback_ftype): New typedef.
4682         (struct target_ops) <to_async>: Use it.
4683
4684 2014-01-15  Joel Brobecker  <brobecker@adacore.com>
4685
4686         * python/py-value.c (get_field_type): Remove unnecessary curly
4687         braces for single-statement if block.
4688
4689 2014-01-15  Joel Brobecker  <brobecker@adacore.com>
4690
4691         * python/py-type.c (convert_field): Add missing empty line
4692         after declarations.
4693
4694 2014-01-14  Doug Evans  <dje@google.com>
4695
4696         * symfile.h (expand_symtabs_matching): Renamed from
4697         expand_partial_symbol_names.  Update prototype.
4698         (map_symbol_filenames): Renamed from map_partial_symbol_filenames.
4699         * symfile.c (expand_symtabs_matching): Renamed from
4700         expand_partial_symbol_names.  New args file_matcher, kind.
4701         Rename arg fun to symbol_matcher.
4702         (map_symbol_filenames): Renamed from map_partial_symbol_filenames.
4703         * ada-lang.c (ada_complete_symbol_matcher): Renamed from
4704         ada_expand_partial_symbol_name.
4705         (ada_make_symbol_completion_list): Update to call
4706         expand_symtabs_matching.
4707         (ada_add_global_exceptions): Call expand_symtabs_matching.
4708         * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_files): Update to
4709         call map_symbol_filenames.
4710         * symtab.c (sources_info): Update to call map_symbol_filenames.
4711         (search_symbols): Call expand_symtabs_matching.
4712         (symbol_completion_matcher): Renamed from expand_partial_symbol_name.
4713         (default_make_symbol_completion_list_break_on): Update to call
4714         expand_symtabs_matching.
4715         (make_source_files_completion_list): Update to call
4716         map_symbol_filenames.
4717
4718 2014-01-14  Doug Evans  <dje@google.com>
4719
4720         * symfile.h (expand_symtabs_file_matcher_ftype): New typedef.
4721         (expand_symtabs_symbol_matcher_ftype): New typedef.
4722         (quick_symbol_functions.expand_symtabs_matching): Update to use.
4723         expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
4724         * symfile.c (expand_partial_symbol_names): Update to use
4725         expand_symtabs_symbol_matcher_ftype.
4726         * dwarf2read.c (dw2_expand_symtabs_matching): Update to use
4727         expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
4728         Arg name_matcher renamed to symbol_matcher.
4729         * psymtab.c (recursively_search_psymtabs): Update to use
4730         expand_symtabs_symbol_matcher_ftype.  Arg name_matcher renamed to
4731         sym_matcher.
4732         (expand_symtabs_matching_via_partial): Update to use
4733         expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
4734         Arg name_matcher renamed to symbol_matcher.
4735
4736 2014-01-14  Doug Evans  <dje@google.com>
4737
4738         * psymtab.c (expand_partial_symbol_names): Delete, moved to symfile.c.
4739         (map_partial_symbol_filenames): Ditto.
4740         * psymtab.h (expand_partial_symbol_names): Delete, moved to symfile.h.
4741         (map_partial_symbol_filenames): Ditto.
4742         * symfile.c (expand_partial_symbol_names): Moved here from psymtab.c.
4743         (map_partial_symbol_filenames): Ditto.
4744         * symfile.h (expand_partial_symbol_names): Moved here from psymtab.h.
4745         (map_partial_symbol_filenames): Ditto.
4746         * symtab.c: Delete #include "psymtab.h".
4747
4748 2014-01-14  Pedro Alves  <palves@redhat.com>
4749             Tom Tromey  <tromey@redhat.com>
4750
4751         * infrun.c (use_displaced_stepping): Use find_record_target
4752         instead of RECORD_IS_USED.
4753         (adjust_pc_after_break): Use record_full_is_used instead of
4754         RECORD_IS_USED.
4755         * record-btrace.c (record_btrace_open): Call record_preopen
4756         instead of checking RECORD_IS_USED.
4757         * record-full.c (record_full_shortname)
4758         (record_full_core_shortname): New globals.
4759         (record_full_is_used): New function.
4760         (find_full_open): Call record_preopen instead of checking
4761         RECORD_IS_USED.
4762         (init_record_full_ops): Set the target's shortname to
4763         record_full_shortname.
4764         (init_record_full_core_ops): Set the target's shortname to
4765         record_full_core_shortname.
4766         * record-full.h (record_full_is_used): Declare.
4767         * record.c (find_record_target): Make extern.
4768         (record_preopen): New function.
4769         * record.h (RECORD_IS_USED): Delete macro.
4770         (find_record_target, record_preopen): Declare functions.
4771
4772 2014-01-14  Yao Qi  <yao@codesourcery.com>
4773
4774         * gdbarch.sh (core_xfer_shared_libraries): Change its argument
4775         'len''s type to ULONGEST.
4776         (core_xfer_shared_libraries_aix): Likewise.
4777         * gdbarch.c, gdbarch.h: Regenerated.
4778         * i386-cygwin-tdep.c (windows_core_xfer_shared_libraries):
4779         Change type of 'len' to ULONGEST.
4780         * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise.
4781         (rs6000_aix_core_xfer_shared_libraries_aix): Likewise.
4782
4783 2014-01-14  Yao Qi  <yao@codesourcery.com>
4784
4785         * common/linux-osdata.c (linux_xfer_osdata_processes): Change
4786         type of 'len' to ULONGEST.
4787         (linux_xfer_osdata_processgroups): Likewise.
4788         (linux_xfer_osdata_threads): Likewise.
4789         (linux_xfer_osdata_fds): Likewise.
4790         (linux_xfer_osdata_isockets): Likewise.
4791         (linux_xfer_osdata_shm): Likewise.
4792         (linux_xfer_osdata_sem): Likewise.
4793         (linux_xfer_osdata_msg): Likewise.
4794         (linux_common_xfer_osdata): Likewise.
4795         (struct osdata_type) <getter>: Likewise.
4796         * common/linux-osdata.h (linux_common_xfer_osdata): Update
4797         the declaration.
4798
4799 2014-01-14  Yao Qi  <yao@codesourcery.com>
4800
4801         * target.h (target_xfer_partial_ftype): Update.
4802         (struct target_ops) <to_xfer_partial>: Change 'len' type to
4803         ULONGEST.
4804         * aix-thread.c (aix_thread_xfer_partial): Change type of
4805         argument 'len' to ULONGEST.
4806         * auxv.c (procfs_xfer_auxv): Likewise.
4807         (ld_so_xfer_auxv): Likewise.
4808         (memory_xfer_auxv): Likewise.
4809         * bfd-target.c (target_bfd_xfer_partial): Likewise.
4810         * bsd-kvm.c (bsd_kvm_xfer_partial): Likewise.
4811         * bsd-uthread.c (bsd_uthread_xfer_partial): Likewise.
4812         * corelow.c (core_xfer_partial): Likewise.
4813         * ctf.c (ctf_xfer_partial): Likewise.
4814         * darwin-nat.c (darwin_read_write_inferior): Likewise.  Use
4815         '%u'.
4816         (darwin_read_dyld_info): Likewise.
4817         (darwin_xfer_partial): Likewise.
4818         * exec.c (section_table_xfer_memory_partial): Likewise.
4819         (exec_xfer_partial): Likewise.
4820         * exec.h (section_table_xfer_memory_partial): Update
4821         declaration.
4822         * gnu-nat.c (gnu_xfer_memory): Likewise.  Call pulongest
4823         instead of plongest.
4824         (gnu_xfer_partial): Likewise.
4825         * ia64-hpux-nat.c (ia64_hpux_xfer_memory): Likewise.
4826         (ia64_hpux_xfer_solib_got): Likewise.
4827         (ia64_hpux_xfer_partial): Likewise.
4828         * ia64-linux-nat.c (ia64_linux_xfer_partial):
4829         * inf-ptrace.c (inf_ptrace_xfer_partial):
4830         * inf-ttrace.c (inf_ttrace_xfer_partial):
4831         * linux-nat.c (linux_xfer_siginfo): Likewise.
4832         (linux_nat_xfer_partial): Likewise.
4833         (spu_enumerate_spu_ids, linux_proc_xfer_spu): Likewise.
4834         (linux_nat_xfer_osdata, linux_xfer_partial): Likewise.
4835         * monitor.c (monitor_xfer_memory): Likewise.
4836         (monitor_xfer_partial): Likewise.
4837         * procfs.c (procfs_xfer_partial): Likewise.
4838         * record-full.c (record_full_xfer_partial): Likewise.
4839         (record_full_core_xfer_partial): Likewise.
4840         * remote-sim.c (gdbsim_xfer_memory): Likewise.  Call pulongest
4841         instead of plongest.
4842         (gdbsim_xfer_partial): Likewise.
4843         * remote.c (remote_xfer_partial): Likewise.
4844         * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise.
4845         * rs6000-aix-tdep.h (rs6000_aix_ld_info_to_xml): Update
4846         declaration.
4847         * rs6000-nat.c (rs6000_xfer_partial): Likewise.
4848         (rs6000_xfer_shared_libraries): Likewise.
4849         * sol-thread.c (sol_thread_xfer_partial): Likewise.
4850         * sparc-nat.c (sparc_xfer_wcookie): Likewise.
4851         (sparc_xfer_partial): Likewise.
4852         * spu-linux-nat.c (spu_proc_xfer_spu): Likewise.
4853         (spu_xfer_partial): Likewise.
4854         * spu-multiarch.c (spu_xfer_partial): Likewise.
4855         * target.c (target_read_live_memory): Likewise.
4856         (memory_xfer_live_readonly_partial): Likewise.
4857         (memory_xfer_partial, memory_xfer_partial_1): Likewise.
4858         (target_xfer_partial, default_xfer_partial): Likewise.
4859         (current_xfer_partial): Likewise.
4860         * tracepoint.c (tfile_xfer_partial): Likewise.
4861         * windows-nat.c (windows_xfer_memory): Likewise.  Call
4862         pulongest instead of plongest.
4863         (windows_xfer_partial): Likewise.
4864         (windows_xfer_shared_libraries): Likewise.
4865
4866 2014-01-14  Yao Qi  <yao@codesourcery.com>
4867
4868         * rs6000-nat.c (rs6000_xfer_shared_libraries): Use
4869         target_xfer_partial_ftype.
4870
4871 2014-01-13  Siva Chandra Reddy  <sivachandra@google.com>
4872
4873         PR python/15464
4874         PR python/16113
4875         * valops.c (value_struct_elt_bitpos): New function
4876         * py-type.c (convert_field): Set 'name' attribute of a gdb.Field
4877         object to 'None' if the field name is an empty string ("").
4878         * python/py-value.c (valpy_getitem): Use 'bitpos' and 'type'
4879         attribute to look for a field when 'name' is 'None'.
4880         (get_field_type): New function
4881
4882 2014-01-13  Doug Evans  <dje@google.com>
4883
4884         PR symtab/16426
4885         * dwarf2read.c (dwarf2_get_dwz_file): Call gdb_bfd_record_inclusion.
4886         (try_open_dwop_file): Ditto.
4887         * gdb_bfd.c: #include "vec.h".
4888         (bfdp): New typedef.
4889         (struct gdb_bfd_data): New member included_bfds.
4890         (gdb_bfd_unref): Unref all included bfds.
4891         (gdb_bfd_record_inclusion): New function.
4892         * gdb_bfd.h (gdb_bfd_record_inclusion): Declare.
4893
4894 2014-01-13  Tom Tromey  <tromey@redhat.com>
4895
4896         * gdbcore.h (deprecated_core_resize_section_table): Remove.
4897
4898 2014-01-13  Tom Tromey  <tromey@redhat.com>
4899
4900         * defs.h (use_windows): Remove.
4901         * gdb.c (main): Update.
4902         * main.c (captured_main, gdb_main): Update.
4903         * main.h (struct captured_main_args) <use_windows>: Remove.
4904         * top.c (use_windows): Remove.
4905
4906 2014-01-13  Tom Tromey  <tromey@redhat.com>
4907
4908         * defs.h (deprecated_flush_hook): Remove.
4909
4910 2014-01-13  Jan Kratochvil  <jan.kratochvil@redhat.com>
4911
4912         PR threads/16216
4913         * linux-thread-db.c (try_thread_db_load): Add parameter
4914         check_auto_load_safe.  Move here the file_is_auto_load_safe call.
4915         (try_thread_db_load_from_pdir_1): Move it there from here.
4916         (try_thread_db_load_from_sdir): Update caller.
4917         (try_thread_db_load_from_dir): Move it there from here.
4918
4919 2014-01-13  Patrick Palka  <patrick@parcs.ath.cx>
4920
4921         * regformats/regdat.sh: Always rewrite the register file.
4922
4923 2014-01-13  Pedro Alves  <palves@redhat.com>
4924
4925         * Makefile.in (CHECK_HEADERS): New variable.
4926         (check-headers:): New rule.
4927
4928 2014-01-13  Tom Tromey  <tromey@redhat.com>
4929
4930         * cli/cli-setshow.c (do_set_command): Update.
4931         * defs.h (deprecated_set_hook): Remove.
4932         * top.c (deprecated_set_hook): Remove.
4933
4934 2014-01-13  Pedro Alves  <palves@redhat.com>
4935
4936         * tracepoint.c (tfile_fetch_registers): Don't infer the PC from
4937         the tracepoint if the PC is a pseudo-register.
4938
4939 2014-01-13  Tom Tromey  <tromey@redhat.com>
4940
4941         * defs.h (XCALLOC): Remove.
4942         * bcache.c (bcache_xmalloc): Use XCNEW, not XCALLOC.
4943         (print_bcache_statistics): Use XCNEWVEC, not XCALLOC.
4944         * dwarf2loc.c (allocate_piece_closure): Likewise.
4945         * elfread.c (elf_symfile_segments): Likewise.
4946         (elf_symfile_segments): Likewise.
4947         * gdbtypes.c (copy_type_recursive): Likewise.
4948         * i386-tdep.c (i386_gdbarch_init): Use XCNEW, not XCALLOC.
4949         * jit.c (jit_frame_sniffer): Use XCNEWVEC, not XCALLOC.
4950         * minsyms.c (prim_record_minimal_symbol_full): Use XCNEW, not
4951         XCALLOC.
4952         * mt-tdep.c (mt_gdbarch_init): Likewise.
4953         * opencl-lang.c (allocate_lval_closure): Use XCNEWVEC, not
4954         XCALLOC.
4955         * psymtab.c (psymbol_compare): Use XCNEW, not XCALLOC.
4956         * regcache.c (regcache_xmalloc_1): Use XCNEWVEC, not XCALLOC.
4957         * registry.c (registry_alloc_data): Likewise.
4958         * rs6000-tdep.c (rs6000_gdbarch_init): Use XCNEW, not XCALLOC.
4959         * s390-linux-tdep.c (s390_gdbarch_init): Likewise.
4960         * serial.c (serial_fdopen_ops): Likewise.
4961         * solib-aix.c (solib_aix_get_section_offsets): Use XCNEWVEC, not
4962         XCALLOC.
4963         * spu-tdep.c (spu_gdbarch_init): Use XCNEW, not XCALLOC.
4964         * symfile.c (default_symfile_segments): Use XCNEW and XCNEWVEC,
4965         not XCALLOC.
4966
4967 2014-01-13  Tom Tromey  <tromey@redhat.com>
4968
4969         * defs.h (XMALLOC): Remove.
4970         * avr-tdep.c (avr_gdbarch_init): Use XNEW, not XMALLOC.
4971         * bfin-tdep.c (bfin_gdbarch_init): Likewise.
4972         * cli-out.c (struct ui_out *): Likewise.
4973         * cli/cli-dump.c (add_dump_command): Likewise.
4974         (add_dump_command): Likewise.
4975         * complaints.c (get_complaints): Likewise.
4976         (find_complaint): Likewise.
4977         * dwarf2-frame.c (execute_cfa_program): Likewise.
4978         * dwarf2read.c (abbrev_table_read_table): Likewise.
4979         * gdbarch.sh: Likewise.
4980         * gdbarch.c: Rebuild.
4981         * inf-ttrace.c (inf_ttrace_add_page): Likewise.
4982         * interps.c (interp_new): Likewise.
4983         * lm32-tdep.c (lm32_gdbarch_init): Likewise.
4984         * m32r-tdep.c (m32r_gdbarch_init): Likewise.
4985         * mi/mi-console.c (mi_console_file_new): Likewise.
4986         * mi/mi-interp.c (mi_interpreter_init): Likewise.
4987         * mi/mi-out.c (mi_out_new): Likewise.
4988         * mi/mi-parse.c (mi_parse): Likewise.
4989         * microblaze-tdep.c (microblaze_gdbarch_init): Likewise.
4990         * moxie-tdep.c (moxie_gdbarch_init): Likewise.
4991         * observer.c (xalloc_observer_list_node): Likewise.
4992         * regcache.c (regcache_xmalloc_1): Likewise.
4993         * reggroups.c (reggroup_new): Likewise.
4994         (_initialize_reggroup): Likewise.
4995         * registry.c (register_data_with_cleanup): Likewise.
4996         * remote.c (remote_notif_stop_alloc_reply): Likewise.
4997         * ser-base.c (serial_ttystate): Likewise.
4998         * ser-mingw.c (make_pipe_state): Likewise.
4999         * ser-pipe.c (pipe_open): Likewise.
5000         * serial.c (serial_open): Likewise.
5001         * sh64-tdep.c (sh64_gdbarch_init): Likewise.
5002         * tui/tui-data.c (tui_alloc_generic_win_info): Likewise.
5003         (tui_alloc_win_info): Likewise.
5004         (tui_add_content_elements): Likewise.
5005         * tui/tui-file.c (tui_file_new): Likewise.
5006         * tui/tui-out.c (tui_out_new): Likewise.
5007         * ui-file.c (mem_file_new): Likewise.
5008         * ui-out.c (push_level): Likewise.
5009         (make_cleanup_ui_out_end): Likewise.
5010         (append_header_to_list): Likewise.
5011         (ui_out_new): Likewise.
5012         * user-regs.c (user_reg_add_builtin): Likewise.
5013
5014 2014-01-13  Tom Tromey  <tromey@redhat.com>
5015
5016         * defs.h (XZALLOC): Remove.
5017         * ada-lang.c (get_ada_inferior_data): Use XCNEW, not XZALLOC.
5018         * ada-tasks.c (get_ada_tasks_pspace_data): Likewise.
5019         (get_ada_tasks_inferior_data): Likewise.
5020         * auto-load.c (get_auto_load_pspace_data): Likewise.
5021         * auxv.c (get_auxv_inferior_data): Likewise.
5022         * bfd-target.c (target_bfd_reopen): Likewise.
5023         * breakpoint.c (get_catch_syscall_inferior_data): Likewise.
5024         (deprecated_insert_raw_breakpoint): Likewise.
5025         * bsd-uthread.c (bsd_uthread_pid_to_str): Likewise.
5026         * corelow.c (core_open): Likewise.
5027         * darwin-nat.c (darwin_check_new_threads): Likewise.
5028         (darwin_attach_pid): Likewise.
5029         * dummy-frame.c (dummy_frame_push): Likewise.
5030         * dwarf2-frame.c (dwarf2_frame_cache): Likewise.
5031         * dwarf2loc.c (allocate_piece_closure): Likewise.
5032         * elfread.c (elf_symfile_segments): Likewise.
5033         * eval.c (ptrmath_type_p): Likewise.
5034         * exceptions.c (EXCEPTIONS_SIGJMP_BUF): Likewise.
5035         * gdbtypes.c (alloc_type_arch): Likewise.
5036         (alloc_type_instance): Likewise.
5037         * hppa-tdep.c (hppa_gdbarch_init): Likewise.
5038         * inf-child.c (inf_child_can_use_agent): Likewise.
5039         * inflow.c (get_inflow_inferior_data): Likewise.
5040         * infrun.c (save_infcall_suspend_state): Likewise.
5041         * jit.c (jit_reader_load): Likewise.
5042         (get_jit_objfile_data): Likewise.
5043         (get_jit_program_space_data): Likewise.
5044         (jit_object_open_impl): Likewise.
5045         (jit_symtab_open_impl): Likewise.
5046         (jit_block_open_impl): Likewise.
5047         (jit_frame_sniffer): Likewise.
5048         * linux-fork.c (add_fork): Likewise.
5049         * maint.c (make_command_stats_cleanup): Likewise.
5050         * objfiles.c (get_objfile_pspace_data): Likewise.
5051         * opencl-lang.c (struct lval_closure): Likewise.
5052         * osdata.c (osdata_start_osdata): Likewise.
5053         * progspace.c (new_address_space): Likewise.
5054         (add_program_space): Likewise.
5055         * remote-sim.c (get_sim_inferior_data): Likewise.
5056         * sh-tdep.c (sh_gdbarch_init): Likewise.
5057         * skip.c (Ignore): Likewise.
5058         (skip_delete_command): Likewise.
5059         * solib-aix.c (get_solib_aix_inferior_data): Likewise.
5060         (library_list_start_library): Likewise.
5061         (solib_aix_current_sos): Likewise.
5062         * solib-darwin.c (get_darwin_info): Likewise.
5063         (darwin_current_sos): Likewise.
5064         * solib-dsbt.c (get_dsbt_info): Likewise.
5065         * solib-ia64-hpux.c (new_so_list): Likewise.
5066         (ia64_hpux_get_solib_linkage_addr): Likewise.
5067         * solib-spu.c (append_ocl_sos): Likewise.
5068         (spu_current_sos): Likewise.
5069         * solib-svr4.c (get_svr4_info): Likewise.
5070         (svr4_keep_data_in_core): Likewise.
5071         (library_list_start_library): Likewise.
5072         (svr4_default_sos): Likewise.
5073         (svr4_read_so_list): Likewise.
5074         * solib-target.c (library_list_start_library): Likewise.
5075         (solib_target_current_sos): Likewise.
5076         * sparc-tdep.c (sparc32_gdbarch_init): Likewise.
5077         * symfile-debug.c (install_symfile_debug_logging): Likewise.
5078         * symfile.c (default_symfile_segments): Likewise.
5079         * target-descriptions.c (tdesc_data_init): Likewise.
5080         (tdesc_create_reg): Likewise.
5081         (struct tdesc_type *): Likewise.
5082         (tdesc_create_vector): Likewise.
5083         (tdesc_set_struct_size): Likewise.
5084         (struct tdesc_type *): Likewise.
5085         (tdesc_free_feature): Likewise.
5086         (tdesc_create_feature): Likewise.
5087         * windows-nat.c (windows_add_thread): Likewise.
5088         (windows_make_so): Likewise.
5089         * xml-support.c (gdb_xml_body_text): Likewise.
5090         (gdb_xml_create_parser_and_cleanup): Likewise.
5091         (xml_process_xincludes): Likewise.
5092         * xml-syscall.c (allocate_syscalls_info): Likewise.
5093         (syscall_create_syscall_desc): Likewise.
5094
5095 2014-01-12  Sergio Durigan Junior  <sergiodj@redhat.com>
5096
5097         * i386-tdep.c (i386_stap_parse_special_token_triplet): New
5098         function, with code from i386_stap_parse_special_token.
5099         (i386_stap_parse_special_token_three_arg_disp): Likewise.
5100         (i386_stap_parse_special_token): Move code to the two functions
5101         above; simplify it.
5102
5103 2014-01-09  Pedro Alves  <palves@redhat.com>
5104             Hui Zhu  <hui@codesourcery.com>
5105
5106         PR gdb/16101
5107         * breakpoint.c (insert_bp_location): Rename hw_bp_err_string to
5108         bp_err_string.  Don't mark the location shlib_disabled if the
5109         error thrown wasn't a generic or memory error.  Catch errors
5110         thrown while inserting breakpoints in overlayed code.  Output
5111         error message of software breakpoints.
5112         * remote.c (remote_insert_breakpoint): If this breakpoint has
5113         target-side commands but this stub doesn't support Z0 packets,
5114         throw NOT_SUPPORTED_ERROR error.
5115         * exceptions.h (enum errors) <NOT_SUPPORTED_ERROR>: New error.
5116         * target.h (target_insert_breakpoint): Extend comment.
5117         (target_insert_hw_breakpoint): Add comment.
5118
5119 2014-01-08  Pedro Alves  <palves@redhat.com>
5120
5121         * remote.c (remote_add_thread): Add threads silently if starting
5122         up.
5123         (remote_notice_new_inferior): If in all-stop, and starting up,
5124         don't call notice_new_inferior.
5125         (get_current_thread): New function, factored out from ...
5126         (add_current_inferior_and_thread): ... this.  Adjust.
5127         (remote_start_remote) <all-stop>: Fetch the thread list.  If we
5128         found any thread, then select the remote's current thread as GDB's
5129         current thread too.
5130
5131 2014-01-08  Joel Brobecker  <brobecker@adacore.com>
5132
5133         * NEWS: Create a new section for the next release branch.
5134         Rename the section of the current branch, now that it has
5135         been cut.
5136
5137 2014-01-08  Joel Brobecker  <brobecker@adacore.com>
5138
5139         GDB 7.7 branch created (79301218fa0f074c5656db0ec8972a5ddcf91fb5):
5140         * version.in: Bump version to 7.7.50.DATE-cvs.
5141
5142 2014-01-08  Yao Qi  <yao@codesourcery.com>
5143
5144         * spu-linux-nat.c (spu_symbol_file_add_from_memory): Change
5145         type of 'id' to gdb_byte.  Cast 'id' to 'const char *'.
5146         (spu_xfer_partial): Cast 'buf' to 'const char *'.
5147
5148 2014-01-08  Yao Qi  <yao@codesourcery.com>
5149
5150         * spu-linux-nat.c (spu_symbol_file_add_from_memory): Pass
5151         return value of bfd_get_filename to symbol_file_add_from_bfd.
5152
5153 2014-01-08  Pierre Muller  <muller@sourceware.org>
5154
5155         Fix PR16201.
5156         * coff-pe-read.c (struct read_pe_section_data): Add index field.
5157         (add_pe_exported_sym): Use SECTION_DATA->INDEX for call
5158         to prim_record_mininal_symbol_and_info.
5159         (add_pe_forwarded_sym): Use known section number of forwarded symbol
5160         in call to prim_record_minimal_symbol_and_info.
5161         (read_pe_exported_syms): Set index field of section_data.
5162
5163 2014-01-07  Andrew Pinski  <apinski@cavium.com>
5164
5165         * features/aarch64-core.xml (cpsr): Change to be 64bit.
5166         * features/aarch64.c: Regenerate.
5167
5168 2014-01-07  Andreas Schwab  <schwab@linux-m68k.org>
5169
5170         * target.c (return_null): Define.
5171         (update_current_target): Use it instead of return_zero for
5172         functions that return a pointer.
5173
5174 2014-01-07  Edjunior Barbosa Machado  <emachado@linux.vnet.ibm.com>
5175
5176         * source.c (add_path): Fix check for duplicated paths in the previously
5177         included paths.
5178
5179 2014-01-07  Honggyu Kim  <hong.gyu.kim@lge.com>
5180
5181         * ada-lang.c: Remove duplicated include statements.
5182         * alphabsd-nat.c: Ditto.
5183         * amd64-darwin-tdep.c: Ditto.
5184         * amd64fbsd-nat.c: Ditto.
5185         * auto-load.c: Ditto.
5186         * ax-gdb.c: Ditto.
5187         * breakpoint.c: Ditto.
5188         * dbxread.c: Ditto.
5189         * fork-child.c: Ditto.
5190         * gdb_usleep.c: Ditto.
5191         * i386-darwin-tdep.c: Ditto.
5192         * i386fbsd-nat.c: Ditto.
5193         * infcmd.c: Ditto.
5194         * inferior.c: Ditto.
5195         * jv-lang.c: Ditto.
5196         * linux-nat.c: Ditto.
5197         * linux-tdep.c: Ditto.
5198         * m68kbsd-nat.c: Ditto.
5199         * m68klinux-nat.c: Ditto.
5200         * microblaze-tdep.c: Ditto.
5201         * mips-linux-tdep.c: Ditto.
5202         * mn10300-tdep.c: Ditto.
5203         * nto-tdep.c: Ditto.
5204         * opencl-lang.c: Ditto.
5205         * osdata.c: Ditto.
5206         * printcmd.c: Ditto.
5207         * regcache.c: Ditto.
5208         * remote-m32r-sdi.c: Ditto.
5209         * remote.c: Ditto.
5210         * symfile.c: Ditto.
5211         * symtab.c: Ditto.
5212         * tilegx-linux-nat.c: Ditto.
5213         * tilegx-tdep.c: Ditto.
5214         * tracepoint.c: Ditto.
5215         * valops.c: Ditto.
5216         * vaxbsd-nat.c: Ditto.
5217         * windows-nat.c: Ditto.
5218         * xtensa-tdep.c: Ditto.
5219
5220 2014-01-07  Yao Qi  <yao@codesourcery.com>
5221
5222         * spu-linux-nat.c (_initialize_spu_nat): Declare.
5223
5224 2014-01-07  Yao Qi  <yao@codesourcery.com>
5225             Joel Brobecker  <brobecker@adacore.com>
5226
5227         * aix-thread.c (pdc_read_regs): Cast parameter to uintptr_t.
5228         (pdc_write_regs): Likewise.
5229         (fetch_regs_kernel_thread): Likewise.
5230         (store_regs_kernel_thread): Likewise.
5231
5232 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
5233
5234         * ada-varobj.c (ada_varobj_adjust_for_child_access): Convert
5235         tagged type objects to their actual type.
5236
5237 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
5238
5239         * ada-valprint.c (print_field_values): Add "language" parameter.
5240         Update calls to print_field_values and print_variant_part.
5241         Pass new parameter "language" in call to val_print instead
5242         of "current_language".  Replace call to ada_val_print by call
5243         to val_print.
5244         (print_variant_part): Add "language" parameter.
5245         (ada_val_print_struct_union): Update call to print_field_values.
5246
5247 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
5248
5249         * ada-valprint.c (ui_memcpy): Delete.
5250         (ada_print_floating): Update documentation.  Add empty line
5251         between between function documentation and implementation.
5252         Delete variable "buffer".  Use ui_file_xstrdup in place of
5253         ui_file_put.  Minor adjustments following this change.
5254
5255 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
5256
5257         * ada-valprint.c (ada_val_print_string): New function,
5258         extracted from ada_val_print_array.
5259         (ada_val_print_array): Replace extracted code by call
5260         to ada_val_print_string followed by a return.  Move
5261         "else" branch to the function's top block.
5262
5263 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
5264
5265         * ada-valprint.c (ada_val_print_array): Move implementation
5266         down.  Rename parameter "offset" and "val" into "offset_aligned"
5267         and "original_value" respectively.  Add parameter "offset".
5268
5269 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
5270
5271         * ada-valprint.c (ada_val_print_ref): Rewrite by mostly
5272         re-organizing the code. Change the "???" message printed
5273         when target type is a TYPE_CODE_UNDEF into
5274         "<ref to undefined type>".
5275
5276 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
5277
5278         * ada-valprint.c (print_record): Delete, implementation inlined...
5279         (ada_val_print_struct_union): ... here.  Remove call to
5280         ada_check_typedef in inlined implementation.
5281
5282 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
5283
5284         * ada-valprint.c (ada_val_print_gnat_array): New function,
5285         extracted from ada_val_print_1;
5286         (ada_val_print_ptr, ada_val_print_num, ada_val_print_enum)
5287         (ada_val_print_flt, ada_val_print_struct_union)
5288         (ada_val_print_ref): Likewise.
5289         (ada_val_print_1): Delete variables i and elttype.
5290         Replace extracted-out code by call to corresponding
5291         new functions.
5292
5293 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
5294
5295         * ada-valprint.c (ada_val_print_1): Remove call to gdb_flush.
5296
5297 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
5298
5299         * ada-valprint.c (ada_val_print_1): Replace calls to
5300         ada_val_print_1 by calls to val_print.
5301
5302 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
5303
5304         * ada-valprint.c (ada_val_print_1): Add parameter "language".
5305         Update calls to self accordingly.  Replace calls to c_val_print
5306         by calls to val_print.
5307
5308 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
5309
5310         * ada-valprint.c (print_record): Delete declaration.
5311         (adjust_type_signedness, ada_val_print_1): Likewise.
5312         (ada_val_print): Move function implementation down.
5313         (print_variant_part, print_field_values, print_record):
5314         Move function implementation up.
5315
5316 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
5317
5318         * python/py-type.c (typy_get_name): New function.
5319         (type_object_getset): Add entry for attribute "name".
5320         * NEWS: Add entry mentioning this new attribute.
5321
5322 2014-01-07  Yao Qi  <yao@codesourcery.com>
5323
5324         * gnu-nat.c (set_exceptions_cmd): Remove an empty body 'if'
5325         statement.
5326
5327 2014-01-07  Yao Qi  <yao@codesourcery.com>
5328
5329         * gnu-nat.c (info_port_rights): Add qualifier const to
5330         argument args.
5331
5332 2014-01-07  Yao Qi  <yao@codesourcery.com>
5333
5334         * gnu-nat.c (trace_me): Use 'void' for empty argument list.
5335
5336 2014-01-07  Yao Qi  <yao@codesourcery.com>
5337
5338         * gnu-nat.c (make_inf) Update declaration.
5339         (make_inf): Make it static.
5340         (inf_set_traced): Likewise.
5341         (inf_port_to_thread, inf_task_died_status): Likewise.
5342
5343 2014-01-07  Yao Qi  <yao@codesourcery.com>
5344
5345         * gnu-nat.c (inf_tid_to_proc): Remove declaration.
5346
5347 2014-01-07  Yao Qi  <yao@codesourcery.com>
5348
5349         * gnu-nat.c (_initialize_gnu_nat): Declare.
5350
5351 2014-01-07  Yao Qi  <yao@codesourcery.com>
5352
5353         * gdbarch.sh (byte_order, byte_order_for_code): Change type to
5354         'enum bfd_endian'.
5355         (struct gdbarch_info) <byte_order>: Change type to
5356         'enum bfd_endian'.
5357         <byte_order_for_code>: Likewise.
5358         * gdbarch.c, gdbarch.h: Regenerated.
5359
5360 2014-01-06  Sasha Smundak  <asmundak@google.com>
5361
5362         * jit.c: (jit_reader_load_command): Fix JIT reader path creation.
5363
5364 2014-01-06  Tom Tromey  <tromey@redhat.com>
5365
5366         * doublest.c (convert_doublest_to_floatformat): Use const, not
5367         CONST.
5368         * somread.c (som_symtab_read): Likewise.
5369
5370 2014-01-07  Hui Zhu  <hui@codesourcery.com>
5371
5372         * gdb_bfd.c (gdb_bfd_stash_filename): Removed.
5373         (gdb_bfd_open): Removed gdb_bfd_stash_filename.
5374         (gdb_bfd_fopen): Ditto.
5375         (gdb_bfd_openr): Ditto.
5376         (gdb_bfd_openw): Ditto.
5377         (gdb_bfd_openr_iovec): Ditto.
5378         (gdb_bfd_fdopenr): Ditto.
5379         * gdb_bfd.h (gdb_bfd_stash_filename): Removed.
5380         * solib-aix.c (solib_aix_bfd_open): Alloc object_bfd->filename
5381         with xstrdup.
5382         * solib-darwin.c (darwin_bfd_open): Alloc res->filename
5383         with xstrdup.
5384         * symfile-mem.c (symbol_file_add_from_memory): Removed
5385         gdb_bfd_stash_filename.
5386
5387 2014-01-03  Doug Evans  <dje@google.com>
5388
5389         * nat/linux-waitpid.c (linux_debug): Remove extraneous \n from
5390         output.
5391
5392 2014-01-01  Joel Brobecker  <brobecker@adacore.com>
5393
5394         Update year range in copyright notice of all files.
5395
5396 2014-01-01  Joel Brobecker  <brobecker@adacore.com>
5397
5398         * top.c (print_gdb_version): Set copyright year to 2014.
5399
5400 2014-01-01  Joel Brobecker  <brobecker@adacore.com>
5401
5402         * config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2013.
5403
5404 For older changes see ChangeLog-2013.
5405 \f
5406 Local Variables:
5407 mode: change-log
5408 left-margin: 8
5409 fill-column: 74
5410 version-control: never
5411 coding: utf-8
5412 End: