1 2011-03-15 Andreas Tobler <andreast@fgznet.ch>
3 * MAINTAINERS: Add myself for write after approval privileges.
5 2011-03-15 Michael Snyder <msnyder@vmware.com>
7 * frame.c (find_frame_sal): Assert sym is not null.
9 * dbxread.c (process_one_symbol): Assert 'name' is not null.
11 * objc-lang.c (selectors_info): Check strchr for null result.
13 * stabsread.c (define_symbol): Guard against bad stabstring input.
15 2011-03-15 Pierre Muller <muller@ics.u-strasbg.fr>
17 Remove trailing spaces and tabulations from pascal language
24 2011-03-15 Jan Kratochvil <jan.kratochvil@redhat.com>
26 * dwarf2read.c (dwarf2_get_pc_bounds): Require HIGH strictly higher
28 (read_partial_die): Call complaint for inappropriate zero LOWPC or
29 HIGHPC not strictly higher than LOWPC.
31 2011-03-15 Pierre Muller <muller@ics.u-strasbg.fr>
33 Fix formatting of function declarations returning a pointer in
35 * varobj.c (varobj_add_child): Ditto.
36 * hppa-tdep.h (hppa_init_objfile_priv_data): Ditto.
37 * inferior.h (get_displaced_step_closure_by_addr): Ditto.
39 2011-03-15 Ulrich Weigand <uweigand@de.ibm.com>
41 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): Add support
42 for the "generic" vector ABI used with GCC 4.3 and later.
43 (ppc64_sysv_abi_return_value): Likewise.
45 2011-03-15 Ulrich Weigand <uweigand@de.ibm.com>
47 * infcall.c (call_function_by_hand): Function return value is
48 always a non_lval, even when using struct_return.
50 2011-03-15 Pedro Alves <pedro@codesourcery.com>
52 * printcmd.c (ALL_DISPLAYS_SAFE): New.
53 (map_display_numbers): New.
54 (do_delete_display): New.
55 (undisplay_command): Use map_display_numbers.
56 (do_enable_disable_display): New.
57 (enable_disable_display_command): New function.
58 (enable_display): Delete.
59 (enable_display_command): New.
60 (disable_display_command): Reimplement.
61 (_initialize_printcmd): Adjust "enable display" command to use
62 `enable_display_command' as callback.
64 2011-03-14 Phil Muldoon <pmuldoon@redhat.com>
66 * NEWS: Add Python breakpoint 'stop' operation.
68 2011-03-14 Phil Muldoon <pmuldoon@redhat.com>
70 * NEWS: Delete duplicate entry. Fix typo.
72 2011-03-14 Pierre Muller <muller@ics.u-strasbg.fr>
74 Fix ARI warning about function names in first column.
75 Put prototype declaration on same line as return type.
78 * python/py-stopevent.h: Ditto.
79 For long function names, split parameters to
80 allow function name on same line as return type.
81 * solib-pa64.c: Ditto.
84 For long function declaration, use single line.
88 2011-03-14 Phil Muldoon <pmuldoon@redhat.com>
90 * python/python.h: Declare gdbpy_should_stop and
91 gdbpy_breakpoint_has_py_cond.
92 * python/python.c: Add python.h to includes. Remove python.h from
93 HAVE_PYTHON definition
94 (gdbpy_should_stop): New dummy function.
95 (gdbpy_breakpoint_has_py_cond): New dummy function.
96 * python/py-breakpoint.c (bppy_init): Rewrite to allow
97 sub-classing capabilities.
98 (gdbpy_should_stop): New function.
99 (gdbpy_breakpoint_has_py_cond): New function.
100 (local_setattro): New function.
101 * breakpoint.c (condition_command): Add check for Python 'stop'
103 (bpstat_check_breakpoint_conditions): Execute Python 'stop'
104 operation function as part of stop/continue tests.
106 2011-03-14 Tom Tromey <tromey@redhat.com>
109 * dwarf2loc.c (dwarf_expr_dwarf_call): Remove 'return'.
110 (needs_frame_dwarf_call): Likewise.
112 2011-03-14 Pierre Muller <muller@ics.u-strasbg.fr>
114 Fix ARI warning about functions without parameters that do not
116 * breakpoint.c (all_tracepoints): Replace () by (void).
117 * f-exp.y (match_string_literal): Ditto.
119 * m2-exp.y (yylex): Ditto.
120 * mep-tdep.c (current_me_module): Ditto.
121 (current_options): Ditto.
122 (current_cop_data_bus_width): Ditto.
123 (current_cr_names): Ditto.
124 (current_cr_is_float): Ditto.
125 (current_ccr_names): Ditto.
126 * objc-exp.y (yylex): Ditto.
127 * p-exp.y (yylex): Ditto.
128 * remote.c (send_interrupt_sequence): Ditto.
129 * tracepoint.c (current_trace_status): Ditto.
130 * python/py-evts.c (gdbpy_initialize_py_events): Ditto.
131 * python/py-prettyprint.c (push_dummy_python_frame): Ditto.
133 2011-03-11 Michael Snyder <msnyder@vmware.com>
135 * cli/cli-decode.h (CMD_LIST_AMBIGUOUS): Define.
136 * cli/cli-decode.c (lookup_cmd_1): Use CMD_LIST_AMBIGUOUS.
137 (lookup_cmd): Test for CMD_LIST_AMBIGUOUS.
138 * completer.c (complete_line_internal): Use CMD_LIST_AMBIGUOUS.
139 * top.c (set_verbose): Use CMD_LIST_AMBIGUOUS.
141 * event-loop-c (delete_async_signal_handler): Assert prev_ptr.
142 (delete_async_event_handler): Ditto.
144 * python/py-breakpoint.c (bppy_set_condition): Stop memory leak.
146 * python/py-breakpoint.c (bppy_get_commands): Fix memory leak.
148 * top.c (set_verbose): Assert showcmd was found.
150 2011-03-11 Maxim Grigoriev <maxim2405@gmail.com>
152 * xtensa-tdep.c (warning_once): Correct style issues.
154 2011-03-11 Yao Qi <yao@codesourcery.com>
156 * arm-tdep.c (copy_ldr_str_ldrb_strb): Remove redundant statements.
158 2011-03-11 Andreas Schwab <schwab@redhat.com>
160 * common/aclocal.m4: Remove.
162 2011-03-10 Maxim Grigoriev <maxim2405@gmail.com>
164 * xtensa-tdep.c (windowing_enabled): Remove inline attribute.
165 (xtensa_write_register, xtensa_read_register): Likewise.
166 (xtensa_hextochar): Removed.
167 (xtensa_init_reggroups): Replace xtensa_hextochar () by explicit code.
169 2011-03-10 Maxim Grigoriev <maxim2405@gmail.com>
171 * xtensa-tdep.c (xtensa_c0reg_t): Update comments.
172 (xtensa_call0_frame_cache_t): Update comments. New fields added.
173 (xtensa_alloc_frame_cache): Add initialization for new fields.
174 (xtensa_frame_cache): Change the way how call0_frame_cache () is called.
175 (warning_once): New function.
176 (xtensa_insn_kind): New item c0opc_and.
177 (call0_classify_opcode): Add the case for AND instruction.
178 (call0_track_op): Change arguments. New local variable litbase.
179 Add the case to handle c0opc_and. Update algorithms for c0opc_mov,
180 c0opc_l32r, c0opc_s32i to take into account dynamic stack adjustments
182 Add cases for c0opc_l32e, c0opc_s32e, c0opc_rfwo, c0opc_rfwu.
183 (call0_analyze_prologue): Update the comments. Change arguments.
184 Add the variety of updates to handle extended prologues, which now can
185 conduct dynamic stack adjustments.
186 (call0_frame_cache): Likewise.
187 (xtensa_skip_prologue): Update call0_analyze_prologue () function call.
188 (xtensa_gdbarch_init): Initialize xtensa_session_once_reported.
190 2011-03-10 Michael Snyder <msnyder@vmware.com>
192 * tracepoint.c (cmd_qtv): Discard unused value 'packet'.
193 (cmd_qtframe): Ditto.
194 (cmd_qtbuffer): Ditto.
195 (cmd_bigqtbuffer): Ditto.
197 2011-03-10 Tom Tromey <tromey@redhat.com>
199 * tracepoint.c (trace_actions_command): Update.
200 * thread.c (thread_apply_command): Update.
201 * reverse.c (delete_bookmark_command): Update.
202 (bookmarks_info): Update.
203 * printcmd.c (undisplay_command): Update.
204 * memattr.c (mem_enable_command): Update.
205 (mem_disable_command): Update.
206 (mem_delete_command): Update.
207 * inferior.c (detach_inferior_command): Update.
208 (kill_inferior_command): Update.
209 (remove_inferior_command): Update.
210 * cli/cli-utils.h (struct get_number_or_range_state): New.
211 (init_number_or_range): Declare.
212 (get_number_or_range): Update.
213 * cli/cli-utils.c (init_number_or_range): New function.
214 (get_number_or_range): Change 'pp' parameter to 'state'. Remove
216 (number_is_in_list): Update.
217 * breakpoint.h (get_tracepoint_by_number): Update.
218 * breakpoint.c (map_breakpoint_numbers): Update for change to
220 (find_location_by_number): Use get_number, not
222 (trace_pass_set_count): New function.
223 (trace_pass_command): Update for change to get_number_or_range.
225 (get_tracepoint_by_number): Remove 'multi_p' parameter; add
228 2011-03-10 Phil Muldoon <pmuldoon@redhat.com>
230 * python/py-param.c (add_setshow_generic): Add set/show callback
231 parameters. Register Python object context.
232 (get_show_value): New function.
233 (get_set_value): New function.
234 (call_doc_function): New function.
235 (get_doc_string): Move behind get_show_value/get_set_value.
237 2011-03-10 Andreas Tobler <andreast-list@fgznet.ch>
239 * fbsd-nat.c (fbsd_make_corefile_notes): Constify local `fname'.
241 2011-03-09 Maxim Grigoriev <maxim2405@gmail.com>
243 * xtensa-tdep.c (xtensa_read_register): Add comment.
244 (xtensa_write_register): Likewise.
245 (xtensa_hextochar): Add comment and update to match coding conventions.
246 (xtensa_frame_cache, xtensa_return_value): Follow coding conventions.
247 (execute_l32e, execute_s32e, execute_code): Update comments.
248 (xtensa_exception_handler_t): Update to match coding conventions.
249 (xtensa_insn_kind): Likewise.
251 2011-03-09 Michael Snyder <msnyder@vmware.com>
253 * mi-cmd-disas.c (mi_cmd_disassemble): Fix memory leak.
255 2011-03-09 Pedro Alves <pedro@codesourcery.com>
257 * nto-tdep.c (nto_find_and_open_solib): Constify local `base'.
259 2011-03-09 Tom Tromey <tromey@redhat.com>
261 * thread.c (restore_selected_frame): Handle frame_level == -1.
262 (make_cleanup_restore_current_thread): Use
263 get_selected_frame_if_set.
264 * frame.h (get_selected_frame_if_set): Declare.
265 * frame.c (get_selected_frame_if_set): New function.
267 2011-03-09 Pedro Alves <pedro@codesourcery.com>
269 * cli/cli-cmds.c (shell_escape): Use lbasename.
270 * coffread.c (coff_start_symtab): Constify parameter.
271 (complete_symtab): Constify `name' parameter.
272 (coff_symtab_read): Constify `filestring' local.
273 (coff_getfilename): Constify return and `result' local.
275 * fbsd-nat.c (fbsd_make_corefile_notes): Use lbasename.
276 * linux-fork.c (info_checkpoints_command): Use lbasename.
277 * linux-nat.c (linux_nat_make_corefile_notes): Use lbasename.
278 * minsyms.c (lookup_minimal_symbol): Use lbasename.
279 * nto-tdep.c (nto_find_and_open_solib): Use lbasename.
280 * procfs.c (procfs_make_note_section): Use lbasename.
281 * tui/tui-io.c (printable_part): Constity return and parameter.
283 (print_filename): Constify parameters, and local `s'.
284 (tui_rl_display_match_list): Constify local `temp'.
286 2011-03-09 Jan Kratochvil <jan.kratochvil@redhat.com>
289 2011-03-08 Jan Kratochvil <jan.kratochvil@redhat.com>
290 Fix DWARF-3+ DW_AT_accessibility default assumption.
291 * dwarf2read.c (dwarf2_add_field): Fix new_field->accessibility for
292 cu->header.version >= 3.
294 2011-03-09 Yao Qi <yao@codesourcery.com>
296 * common/Makefile.in: Remove.
297 * common/configure: Remove.
298 * common/configure.ac: Remove.
300 2011-03-09 Yao Qi <yao@codesourcery.com>
303 2011-02-11 Yao Qi <yao@codesourcery.com>
305 * common/Makefile.in: Add copyright header.
307 2011-02-11 Yao Qi <yao@codesourcery.com>
309 * Makefile.in: Remove signals.o from COMMON_OBS. Link
311 * configure.ac: Add common to sub dir.
312 * configure: Regenerate.
314 2011-03-08 Maxim Grigoriev <maxim2405@gmail.com>
316 * xtensa-tdep.c (call0_ret): New function.
317 (xtensa_skip_prologue): Speed up analysis.
319 2011-03-08 Maxim Grigoriev <maxim2405@gmail.com>
321 * xtensa-tdep.c (xtensa_register_reggroup_p): Count in all registers
322 while executing MI command -data-list-changed-registers.
324 2011-03-08 Maxim Grigoriev <maxim2405@gmail.com>
326 * xtensa-tdep.c (xtensa_read_register): New function.
327 (xtensa_write_register): New function.
328 (xtensa_find_register_by_name): New function.
329 (xtensa_windowed_frame_cache): Update comments in type description.
330 (xtensa_frame_cache): Likewise.
331 (xtensa_window_interrupt_insn): New function.
332 (xtensa_frame_cache): Add analysis for Xtensa Window Exception frames.
333 (xtensa_insn_kind): Add new instructions.
334 (rwx_special_register): New function.
335 (call0_classify_opcode): Add new instructions to the analysis.
336 (a0_saved, a7_saved, a11_saved): New variables.
337 (a0_was_saved, a7_was_saved, a11_was_saved): New variables.
338 (execute_l32e): New function.
339 (execute_s32e): New function.
340 (xtensa_exception_handler_t): New type.
341 (execute_code): New function.
342 (xtensa_window_interrupt_frame_cache): New function to conduct frame
343 analysis for Xtensa Window Exception handlers.
345 2011-03-08 Maxim Grigoriev <maxim2405@gmail.com>
347 * xtensa-tdep.c (TX_PS): New.
348 (windowing_enabled): Update to count for Call0 ABI.
349 (xtensa_hextochar): New.
350 (xtensa_init_reggroups): Make algorithm generic.
351 (xtensa_frame_cache): Use TX_PS on Tiny Xtensa.
353 2011-03-08 Maxim Grigoriev <maxim2405@gmail.com>
355 * xtensa-tdep.h (XTENSA_MAX_COPROCESSOR): Update.
357 2011-03-08 Michael Snyder <msnyder@vmware.com>
359 * i386-tdep.c (i386_follow_jump): Check return value of
361 (i386_analyze_struct_return): Ditto.
362 (i386_skip_probe): Ditto.
363 (i386_match_insn): Ditto.
364 (i386_skip_noop): Ditto.
365 (i386_analyze_frame_setup): Ditto.
366 (i386_analyze_register_saves): Ditto.
367 (i386_skip_prologue): Ditto.
368 (i386_skip_main_prologue): Ditto.
370 * target.c (read_whatever_is_readable): Fix memory leak.
372 * i386-tdep.c (i386_process_record): Document fall through.
374 2011-03-08 Jan Kratochvil <jan.kratochvil@redhat.com>
376 Fix DWARF-3+ DW_AT_accessibility default assumption.
377 * dwarf2read.c (dwarf2_add_field): Fix new_field->accessibility for
378 cu->header.version >= 3.
380 2011-03-08 Pedro Alves <pedro@codesourcery.com>
382 * remote.c (remote_check_symbols): Skip if the target has no
385 2011-03-08 Joel Brobecker <brobecker@adacore.com>
387 * target.c (read_whatever_is_readable): Reformat comment,
388 with a minor typo fix. Minor reformatting of the code.
390 2011-03-08 Yao Qi <yao@codesourcery.com>
392 * arm-tdep.c: Remove prototype declaration displaced_in_arm_mode.
393 (displaced_read_reg): Add `dsc' parameter, remove `from' parameter.
394 Use cached result instead of calling displaced_in_arm_mode again.
395 (branch_write_pc, alu_write_pc, load_write_pc): Add `dsc' parameter.
396 (displaced_write_reg, copy_preload, copy_preload_reg): Callers update.
397 (cleanup_copro_load_store, copy_copro_load_store): Likewise.
398 (cleanup_branch, copy_bx_blx_reg, copy_alu_imm): Likewise.
399 (cleanup_alu_reg, copy_alu_reg, cleanup_alu_shifted_reg): Likewise.
400 (copy_alu_shifted_reg, cleanup_load, cleanup_store): Likewise.
401 (copy_extra_ld_st, copy_ldr_str_ldrb_strb): Likewise.
402 (cleanup_block_load_all, cleanup_block_store_pc): Likewise.
403 (cleanup_block_load_pc, copy_block_xfer): Likewise.
404 * arm-linux-tdep.c (arm_linux_copy_svc): Callers update.
405 (arm_catch_kernel_helper_return): Likewise.
406 * gdb/arm-tdep.h : Update function declarations.
408 2011-03-07 Michael Snyder <msnyder@vmware.com>
410 * dwarf2loc.c (indirect_pieced_value): Assert 'piece' not null.
412 * ser-unix.c (hardwire_get_tty_state): Stop memory leak.
414 * mi/mi-cmd-env.c (_initialize_mi_cmd_env): Free environment.
416 * elfread.c (elf_symtab_read): Stop memory leak.
418 * main.c (captured_main): Fix memory leak.
420 2011-03-07 Andreas Schwab <schwab@linux-m68k.org>
422 * ada-lang.c (compare_names): Call is_name_suffix with string1
425 2011-03-07 Tom Tromey <tromey@redhat.com>
427 * xcoffread.c (xcoff_sym_fns): Update.
428 * symfile.h (struct sym_fns) <sym_read_psymbols>: New field.
429 (enum symfile_add_flags) <SYMFILE_NO_READ>: New constant.
430 * symfile.c (syms_from_objfile): Handle SYMFILE_NO_READ.
431 (symbol_file_add_with_addrs_or_offsets): Likewise.
432 (reread_symbols): Handle OBJF_PSYMTABS_READ.
433 * somread.c (som_sym_fns): Update.
434 * psymtab.h (require_partial_symbols): Declare.
435 * psymtab.c (require_partial_symbols): New function.
436 (ALL_OBJFILE_PSYMTABS_REQUIRED): New macro.
437 (ALL_OBJFILE_PSYMTABS): Undef.
438 (ALL_PSYMTABS): Move from psympriv.h.
439 (lookup_partial_symtab, find_pc_sect_psymtab)
440 (lookup_symbol_aux_psymtabs, relocate_psymtabs)
441 (find_last_source_symtab_from_partial)
442 (forget_cached_source_info_partial)
443 (print_psymtab_stats_for_objfile, read_symtabs_for_function)
444 (expand_partial_symbol_tables, read_psymtabs_with_filename)
445 (map_symbol_names_psymtab, map_symbol_filenames_psymtab)
446 (find_symbol_file_from_partial, map_matching_symbols_psymtab)
447 (expand_symtabs_matching_via_partial, maintenance_info_psymtabs):
448 Use ALL_OBJFILE_PSYMTABS_REQUIRED.
449 * psympriv.h (ALL_PSYMTABS): Move to psymtab.c.
450 * objfiles.h (OBJF_PSYMTABS_READ): New macro.
451 * objfiles.c (objfile_has_partial_symbols): Handle lazily-read
453 * mipsread.c (ecoff_sym_fns): Update.
454 * machoread.c (macho_sym_fns): Update.
455 * elfread.c (elf_symfile_read): Set up for lazy psymtab reading.
456 (read_psyms): New function.
457 (elf_sym_fns, elf_sym_fns_gdb_index): Update.
458 (elf_sym_fns_lazy_psyms): New global.
459 * dwarf2read.c (dwarf2_initialize_objfile): Don't call
460 dwarf2_build_psymtabs.
461 * dbxread.c (aout_sym_fns): Update.
462 * coffread.c (coff_sym_fns): Update.
464 2011-03-07 Tom Tromey <tromey@redhat.com>
466 * infrun.c (print_exited_reason): Include inferior id and pid in
469 2011-03-07 Tom Tromey <tromey@redhat.com>
471 * target.h (struct target_ops) <to_has_execution>: Add ptid_t
473 (target_has_execution_1): Update.
474 (target_has_execution_current): Declare.
475 (target_has_execution): Call target_has_execution_current.
476 (default_child_has_execution): Update.
477 * target.c (default_child_has_execution): Add 'the_ptid'
479 (target_has_execution_1): Likewise.
480 (target_has_execution_current): New function.
481 (add_target): Update.
482 (init_dummy_target): Update.
483 * remote-m32r-sdi.c (m32r_has_execution): New function.
484 (init_m32r_ops): Use it.
485 * record.c (record_core_has_execution): Now static. Add
486 'the_ptid' parameter.
487 * inferior.c (have_live_inferiors): Don't save current thread.
488 Use target_has_execution_1.
490 2011-03-07 Yao Qi <yao@codesourcery.com>
492 * Makefile.in (aclocal_m4_deps): Remove gnulib/m4/memcmp.m4.
494 2011-03-07 Joel Brobecker <brobecker@adacore.com>
496 * elfread.c (elf_symtab_read): Minor reformatting.
498 2011-03-07 Joel Brobecker <brobecker@adacore.com>
500 * objc-lang.c (selectors_info): Minor reformatting.
502 2011-03-07 Joel Brobecker <brobecker@adacore.com>
504 * ada-lang.c (compare_names): Add FALLTHROUGH comment.
506 2011-03-07 Joel Brobecker <brobecker@adacore.com>
507 Michael Snyder <msnyder@vmware.com>
509 * ada-valprint.c (ada_val_print_array): Move the declaration of
510 "byte_order" and "elttype" inside the block where these variables
511 are actually used. Remove some special handling for the case
512 where "elttype" and "eltlen" are null. Replace by a comment
513 and a couple of assertion checks.
515 2011-03-05 Michael Snyder <msnyder@vmware.com>
517 * source.c (add_path): Replace semicolon at end of block.
518 * dwarf2expr.c (execute_stack_op): Ditto.
520 2011-03-05 Mike Frysinger <vapier@gentoo.org>
522 * bfin-tdep.c: Include sim-regno.h and gdb/sim-bfin.h.
523 * configure.tgt (bfin-*-*linux*): Define gdb_sim.
524 (bfin-*-*): Likewise.
526 2011-03-05 Michael Snyder <msnyder@vmware.com>
528 * dwarf2expr.c (execute_stack_op): Delete superfluous semicolon.
529 * mdebugread.c (parse_symbol): Ditto.
530 * parse.c (parse_exp_in_context): Ditto.
531 * source.c (add_path): Ditto.
532 * utils.c (gnu_debuglink_crc32): Ditto.
533 * varobj.c (variable_language): Ditto.
535 * linux-tdep.c (linux_get_siginfo_type): Stop memory leak.
537 2011-03-04 Michael Snyder <msnyder@vmware.com>
539 * linux-fork.c (inferior_call_waitptid): Fix copy/paste error.
541 * symfile.c (simple_overlay_update): Check for null return value
542 from lookup_minimal_symbol.
544 * xml-syscall.c (syscall_start_syscall): Assert name is non null.
546 2011-03-04 Thiago Jung Bauermann <bauerman@br.ibm.com>
548 * eval.c (parse_and_eval_address_1): Remove function.
549 * linespec.c (decode_indirect): Call parse_to_comma_and_eval
550 instead of parse_and_eval_address_1.
551 * value.h (parse_and_eval_address_1): Remove prototype.
553 2011-03-04 Michael Snyder <msnyder@vmware.com>
555 * remote.c (putpkt_binary): Document that case stmt falls through.
557 2011-03-04 Thiago Jung Bauermann <bauerman@br.ibm.com>
559 * breakpointc (print_it_typical): Move NULL check from here...
560 (print_bp_stop_message): ... to here.
562 2011-03-04 Michael Snyder <msnyder@msnyder-server.eng.vmware.com>
564 * breakpoint.c (enable_command): Use break instead of continue,
565 and fill in a missing break.
566 (disable_command): Ditto.
568 2011-03-04 Ulrich Weigand <ulrich.weigand@linaro.org>
570 * inflow.c (terminal_init_inferior_with_pgrp): Copy ttystate.
571 (terminal_save_ours): Remove misleading comment.
572 (inflow_inferior_data_cleanup): Free ttystate.
573 (inflow_inferior_exit): Likewise.
574 (copy_terminal_info): Copy ttystate.
576 * serial.c (serial_copy_tty_state): New function.
577 * serial.h (serial_copy_tty_state): Add prototype.
578 (struct serial_ops): Add copy_tty_state callback.
579 * ser-base.c (ser_base_copy_tty_state): New function.
580 * ser-base.h (ser_base_copy_tty_state): Add prototype.
581 * ser-go32.c (dos_copy_tty_state): New function.
582 (dos_ops): Install copy_tty_state callback.
583 * ser-mingw.c (_initialize_ser_windows): Likewise.
584 * ser-pipe.c (_initialize_ser_pipe): Likewise.
585 * ser-unix.c (hardwire_copy_tty_state): New function.
586 (_initialize_ser_hardwire): Install it.
588 2011-03-04 Michael Snyder <msnyder@vmware.com>
590 * breakpoint.c (create_breakpoint): Add missing break statement.
592 Reverting this patch:
593 * infcall.c (call_function_by_hand): Add break statements for lint.
595 Reverting this patch:
596 * cli/cli-script.c (script_from_file): Add break for lint.
598 2011-03-04 Michael Snyder <msnyder@vmware.com>
600 * solib.c (reload_shared_libraries_1): Close memory leak.
602 2011-03-03 Tom Tromey <tromey@redhat.com>
605 * dwarf2read.c (process_psymtab_comp_unit): Handle case where
608 2011-03-03 Michael Snyder <msnyder@vmware.com>
610 * remote-fileio.c (remote_fileio_func_fstat): Initialize all
611 fields of struct 'st' to zero.
613 * tui/tui-winsource.c (tui_update_source_window_as_is): Initialize
614 sal.pspace before calling set_current_source_symtab_and_line.
616 2011-03-03 Yao Qi <yao@codesourcery.com>
618 * Makefile.in (configure-common): Remove. Let Makefile
619 in dir common to rebuild itself.
620 (common/Makefile): Likewise.
622 2011-03-03 Joel Brobecker <brobecker@adacore.com>
624 * utils.c (parse_escape): Add i18n markup in error message.
626 2011-03-03 Yao Qi <yao@codesourcery.com>
628 * gdb/arm-tdep.c (shifted_reg_val): Replace magic number 15 with
630 (thumb_get_next_pc_raw, arm_get_next_pc_raw): Likewise.
631 (displaced_write_reg, displaced_read_reg): Likewise.
632 (copy_ldr_str_ldrb_strb, cleanup_block_load_all): Likewise.
633 (cleanup_block_load_pc, copy_block_xfer): Likewise.
634 (cleanup_branch): Replace magic number 14 and 15 with
635 ARM_LR_REGNUM and ARM_PC_REGNUM respectively.
637 2011-03-02 Michael Snyder <msnyder@vmware.com>
639 * maint.c (maintenance_do_deprecate): No need to check for NULL.
641 * cli/cli-script.c (script_from_file): Add break for lint.
643 * mdebugread.c (parse_partial_symbols): Fix indent.
645 * target-descriptions.c (tdesc_gdb_type): No need to call
646 xstrdup, callee saves a copy.
648 * printcmd.c (print_scalar_formatted): Use strncpy for safety.
650 * infcall.c (call_function_by_hand): Add break statements for lint.
652 * utils.c (parse_escape): Escape the escape char.
654 * python/py-inferior.c (build_inferior_list): Error out if
656 (gdbpy_inferiors): Error out if build_inferior_list fails.
658 * linux-nat.c (linux_nat_xfer_partial): Preserve errno around
661 * record.c (record_restore): Move printf to before error return.
663 2011-03-02 Yao Qi <yao@codesourcery.com>
665 * arm-tdep.h (struct displaced_step_closure): Add two new fields
666 is_thumb and insn_size.
667 * arm-tdep.c (displaced_read_reg): Adjust correct pipeline offset
668 on both ARM and Thumb mode.
669 (arm_process_displaced_insn): Set is_thumb and insn_size.
670 (arm_displaced_init_closure): Handle both 16-bit and 32-bit.
671 (arm_displaced_step_fixup): Likewise.
673 2011-03-01 Michael Snyder <msnyder@vmware.com>
675 * cli/cli-dump.c (dump_bfd_file): Check error return and warn.
677 * jv-lang.c (evaluate_subexp_java): Conditional can't be true.
679 * dwarf2read.c (dwarf2_compute_name): NAME cannot be null here.
681 * cli/cli-dump.c (restore_binary_file): Validate ftell return value.
683 * ada-lang.c (ada_make_symbol_completion_list): Replace malloc
686 * ada-lang.c (aggregate_assign_others): Rename inner scope variable
687 which shadows function parameter.
689 * tracepoint.c (create_tsv_from_upload): Superfluous call
690 to xstrdup. Callee already calls xstrdup.
692 * linespec.c (decode_line_1): Remove unnecessary null check.
694 * tracepoint.c (scope_info): Fix mem leak, remove underused
697 * python/py-prettyprint.c (apply_val_pretty_printer): Remove
698 superfluous null check.
700 * std-regs.c (value_of_builtin_frame_pc_reg): Frame can't be null.
701 (value_of_builtin_frame_fp_reg): Ditto.
703 * event-top.c (display_gdb_prompt): Remove superfluous null check.
705 * python/py-prettyprint.c (apply_val_pretty_printer): VAL may
708 * linespec.c (decode_line_1): Check for null before dereference.
710 * reverse.c (record_restore): Move null-check to before pointer
713 * python/py-utils.c (gdbpy_obj_to_string): Delete unused variable.
715 * objc-lang.c (selectors_info): Add explanitory comment.
716 (classes_info): Ditto.
718 2011-03-01 Ulrich Weigand <ulrich.weigand@linaro.org>
720 * arm-linux-tdep.c (ARM_LDR_PC_SP_4): Add define.
721 (arm_linux_restart_syscall_init): Handle both on-stack and in-kernel
722 versions of the trampoline. Handle Thumb vs. ARM addresses.
723 (arm_kernel_linux_restart_syscall_tramp_frame): New global.
724 (arm_linux_init_abi): Install it.
725 * arm-tdep.c (arm_psr_thumb_bit): Make global.
726 * arm-tdep.c (arm_psr_thumb_bit): Add prototype.
728 2011-02-28 Michael Snyder <msnyder@vmware.com>
730 * ui-out.c (ui_out_field_core_addr): Make local char buffer
731 a little bigger, to avoid possibility of an overflow.
733 * breakpoint.c (breakpoint_adjustment_warning): Make local char
734 buffers a little bigger, to avoid possibility of an overflow.
736 * coffread.c (coff_getfilename): Add check to avoid overflow.
738 * objc-lang.c (selectors_info): Add a small safety margin to
740 (classes_info): Error out on too long REGEXP.
742 * infrun.c (handle_inferior_event): Remove unused function call.
744 * fork-child.c (fork_inferior): Remove ifdef'd code and
747 * linux-thread-db.c (attach_thread): Discard unused value.
749 * linux-nat.c (linux_handle_extended_wait): Delete unused variable.
751 * remote.c (remote_get_noisy_reply): Discard unused value.
752 (remote_vcont_resume): Ditto.
753 (remote_stop_ns): Ditto.
755 * linespec.c (decode_objc): Delete unused variable.
757 * tui/tui-regs.c (tui_register_format): Delete unused variable.
759 * dwarf2read.c (add_partial_symbol): Discard unused values.
760 (read_base_type): Delete unused variable.
762 * dbxread.c (read_dbx_symtab): Discard unused value.
764 * eval.c (evaluate_subexp_standard): Delete unused variable,
765 and discard unused values.
767 * infcmd.c (_initialize_infcmd): Discard unused values.
769 * stabsread.c (rs6000_builtin_type): Missing break statement.
771 * dbxread.c (process_one_symbol): Discard unused value.
773 * coffread.c (coff_end_symtab): Delete unused variable.
775 * dwarf2read.c (dw2_get_file_names): Discard unused value.
776 (dwarf2_add_typedef): Delete unused variable.
777 (read_namespace): Ditto.
778 (dwarf_decode_macros): Ditto.
780 * m2-lang.c (evaluate_subexp_modula2): Discard unused variable.
782 * opencl-lang.c (evaluate_subexp_opencl): Discard unused value.
784 * p-valprint.c (pascal_val_print): Discard unused value.
786 * utils.c (nquery): Call va_end before return;
790 * proc-service.c (ps_plog): Call va_end before return.
792 2011-02-28 Tom Tromey <tromey@redhat.com>
794 * python/python.c (gdbpy_value_cst): New global.
795 (_initialize_python): Initialize it.
796 * python/python-internal.h (gdbpy_value_cst): Declare.
797 * python/py-value.c (convert_value_from_python): Use
800 2011-02-28 Michael Snyder <msnyder@vmware.com>
802 * python/py-cmd.c (cmdpy_init): Fix memory leak.
804 * breakpoint.c (catch_syscall_completer): Free malloced list.
806 * jv-lang.c (java_primitive_type_from_name): Add missing break.
808 * opencl-lang.c (lval_func_check_validity): Rename inner variables.
809 (lval_func_check_synthetic_pointer): Ditto.
810 (lval_func_free_closure): Fix use-after-free.
812 2011-02-28 Tom Tromey <tromey@redhat.com>
814 * psymtab.c (expand_partial_symbol_tables): Use
815 ALL_OBJFILE_PSYMTABS.
817 2011-02-28 Jan Kratochvil <jan.kratochvil@redhat.com>
819 * objc-lang.c (selectors_info): Error on too long REGEXP.
821 2011-02-28 Michael Snyder <msnyder@vmware.com>
823 * python/py-param.c (set_parameter_value): Add missing
826 * linux-record.c (record_linux_system_call): Add missing
829 2011-02-28 Ulrich Weigand <uweigand@de.ibm.com>
831 * breakpoint.c (print_one_breakpoint_location): Remove unused
832 argument PRINT_ADDRESS_BITS. Update callers.
833 (print_one_breakpoint): Likewise.
835 2011-02-28 Ulrich Weigand <uweigand@de.ibm.com>
837 * breakpoint.c (wrap_indent_at_field): New function.
838 (print_breakpoint_location): Use it instead of WRAP_INDENT argument.
839 Allocate ui_stream locally instead of using STB argument.
840 (print_one_breakpoint_location): Update call.
841 * ui-out.c (ui_out_query_field): New function.
842 * ui-out.h (ui_out_query_field): Add prototype.
844 2011-02-28 Joel Brobecker <brobecker@adacore.com>
846 From Michael Snyder <msnyder@vmware.com>
847 * ada-exp.y (write_object_renaming): Add FALLTHROUGH comment.
849 2011-02-27 Michael Snyder <msnyder@vmware.com>
851 * objc-lang.c (selectors_info): Prevent string overrun.
853 * tui/tui-stack.c (tui_get_function_from_frame): Fix off by one
856 * symtab.c (rbreak_command): Move variable 'file_name' to
859 * d-valprint.c (dynamic_array_type): Avoid shadowing a function
860 param with a local variable of the same name.
862 2011-02-27 Michael Snyder <msnyder@vmware.com>
864 * value.c (value_from_history_ref): New function.
865 * value.h (value_from_history_ref): Export.
866 * cli/cli-utils.c (get_number_trailer): Use value_from_history_ref
867 to parse value history references.
868 * cli/cli-utils.h (get_number_trailer): Update comment.
870 2011-02-27 Michael Snyder <msnyder@vmware.com>
872 * inferior.c (detach_inferior_command): Use get_number_or_range.
873 (kill_inferior_command): Ditto.
874 (remove_inferior_command): Ditto.
875 (initialize_inferiors): Make command names plural.
878 2011-02-27 Michael Snyder <msnyder@vmware.com>
880 * darwin-nat-info.c: Fix comment typo.
881 * dwarf2expr.h: Ditto.
884 * frame-unwind.h: Ditto.
886 * hppa-hpux-tdep.c: Ditto.
887 * i386-linux-nat.c: Ditto.
888 * linux-nat.c: Ditto.
891 * ppc-linux-tdep.c: Ditto.
894 * tui/tui-winsource.c: Ditto.
896 2011-02-26 Michael Snyder <msnyder@vmware.com>
898 * breakpoint.c (reattach_breakpoints): Avoid resource leak (ui_file).
900 * maint.c (maintenance_do_deprecate): Plug a memory leak.
902 * dwarf2loc.c (insert_bits): Avoid shadowing a function param
903 with a local variable of the same name.
905 * i387-tdep.c (i387_supply_fxsave): Avoid shadowing a function
906 param with a local variable of the same name.
907 (i387_supply_xsave): Ditto.
909 * linux-low.c (linux_nat_xfer_osdata): Rename local variable so
910 that it does not shadow a function parameter.
912 * i386-nat.c (i386_length_and_rw_bits): Document that case
913 statement is meant to fall through.
915 * expprint.c (dump_subexp_body_standard): Document that case
916 statement is meant to fall through.
918 * amd64-linux-tdep.c (amd64_linux_syscall_record): Delete
919 dead if statement. Condition can't be false.
921 2011-02-25 Michael Snyder <msnyder@vmware.com>
923 * arm-tdep.c: Fix typos in comments.
924 * bsd-uthread.c: Ditto.
925 * completer.c: Ditto.
927 * cp-namespace.c: Ditto.
928 * cp-support.c: Ditto.
929 * cris-tdep.c: Ditto.
931 * dwarf2read.c: Ditto.
935 * mdebugread.c: Ditto.
936 * mips-tdep.c: Ditto.
937 * ppc-linux-nat.c: Ditto.
938 * ppc-linux-tdep.c: Ditto.
940 * sol-thread.c: Ditto.
941 * solib-frv.c: Ditto.
943 * sparc64-tdep.c: Ditto.
945 * stabsread.c: Ditto.
950 * python/py-block.c: Ditto.
951 * python/py-symbol.c: Ditto.
952 * python/py-symtab.c: Ditto.
953 * python/py-value.c: Ditto.
954 * tui/tui-win.c: Ditto.
956 2011-02-25 Michael Snyder <msnyder@vmware.com>
958 * inferior.c (print_inferior): Accept a string instead of an int
959 for requested_inferiors, and use get_number_or_range to parse it.
960 (info_inferiors_command): Pass args string to print_inferior.
961 (initialize_inferiors): Change help string for info inferiors.
962 * inferior.h (print_inferior): Export prototype change.
964 2011-02-25 Tom Tromey <tromey@redhat.com>
966 * common/ax.def (invalid2): Set to 0x31.
968 2011-02-25 Jan Kratochvil <jan.kratochvil@redhat.com>
970 * dwarf2loc.c (disassemble_dwarf_expression) <DW_OP_breg[0-9]+>: Use
972 (disassemble_dwarf_expression) <DW_OP_bregx>: Drop variable offset,
974 (disassemble_dwarf_expression) <DW_OP_fbreg>: Use L and plongest.
976 2011-02-24 Michael Snyder <msnyder@vmware.com>
978 * Makefile.in (clean): Make clean should remove generated files
979 observer.h and observer.inc.
981 2011-02-24 Joel Brobecker <brobecker@adacore.com>
983 Revert the following patch (not approved yet):
984 2011-02-21 Hui Zhu <teawater@gmail.com>
985 * Makefile.in (HFILES_NO_SRCDIR): Add printcmd.h.
986 * ax-gdb.c (gen_printf_expr_callback): New function.
987 * ax-gdb.h (gen_printf_expr_callback): Forward declare.
988 * ax-general.c (ax_memcpy): New function.
989 (ax_print): Handle "printf".
991 * ax.h (ax_memcpy): Forward declare.
992 * common/ax.def (invalid2): Removed.
994 * printcmd.c (printcmd.h): New include.
995 (string_printf): New function.
996 (ui_printf): Removed.
997 (printf_command): Remove static. Call string_printf.
998 (eval_command): Call string_printf.
999 * printcmd.h: New file.
1000 * tracepoint.c (validate_actionline,
1001 encode_actions_1): handle printf_command.
1003 2011-02-23 Tom Tromey <tromey@redhat.com>
1005 * ax-general.c (ax_pick): Add missing newline.
1007 2011-02-23 Michael Snyder <msnyder@vmware.com>
1009 * breakpoint.c (breakpoint_1): Change first argument from an int
1010 to a char pointer, so that the function now accepts a list of
1011 breakpoints rather than just one. Use new function
1012 'number_is_in_list' to implement.
1013 (breakpoints_info): Pass char * instead of int to breakpoint_1.
1014 (watchpoints_info): Ditto.
1015 (tracepoints_info): Ditto.
1016 (maintenance_info_breakpoints): Ditto.
1017 (_initialize_breakpoint): Update help strings to reflect the fact
1018 that these functions can now take more than one argument.
1019 * cli/cli-utils.c (number_is_in_list): New function.
1020 * cli/cli-utils.h (number_is_in_list): Export.
1022 2011-02-23 Michael Snyder <msnyder@vmware.com>
1024 * memattr.c (mem_enable_command): Use get_number_or_range.
1025 (mem_disable_command): Ditto.
1026 (mem_delete_command): Ditto.
1027 (_initialize_mem): Tweak usage message to reflect multiple
1030 2011-02-22 Doug Evans <dje@google.com>
1032 Add gdb.lookup_global_symbol python function.
1034 * python/py-symbol.c (gdbpy_lookup_global_symbol): New function.
1035 * python/python-internal.h (gdbpy_lookup_global_symbol): Declare it.
1036 * python/python.c (GdbMethods): Add entry for lookup_global_symbol.
1038 2011-02-22 Tom Tromey <tromey@redhat.com>
1040 * language.c (language_class_name_from_physname): Rename
1041 'curr_language' argument to 'lang'; use in body.
1043 2011-02-22 Michael Snyder <msnyder@vmware.com>
1045 * cli/cli-utils.c (number_is_in_list): Check for zero return.
1047 2011-02-22 Pedro Alves <pedro@codesourcery.com>
1049 * frame-unwind.h: Fix comment to mention the this frame, not the
1052 2011-02-22 Tom Tromey <tromey@redhat.com>
1054 * symfile.c (auto_solib_limit): Remove.
1055 * symfile.h (auto_solib_limit): Remove.
1057 2011-02-22 Joel Brobecker <brobecker@adacore.com>
1059 * Makefile.in (INSTALLED_LIBS): Delete. Update comment.
1061 2011-02-21 Michael Snyder <msnyder@vmware.com>
1063 * gdbthread.h (print_thread_info): Change prototype.
1064 * thread.c (print_thread_info): Accept char* instead of int for
1065 requested_threads argument. Use new function number_is_in_list
1066 to determine which threads to list.
1067 (info_threads_command): Pass char* to print_thread_info.
1068 * cli/cli-utils.c (number_is_in_list): New function.
1069 * cli/cli-utils.h (number_is_in_list): Export.
1070 * mi/mi-main.c (mi_cmd_thread_info): Pass char* to
1072 (print_one_inferior): Ditto.
1073 (mi_cmd_list_thread_groups): Ditto.
1075 2011-02-21 Jan Kratochvil <jan.kratochvil@redhat.com>
1077 * common/Makefile.in (CFLAGS): New.
1078 (COMPILE): Add $(CFLAGS).
1080 2011-02-21 Tom Tromey <tromey@redhat.com>
1082 * breakpoint.c (catch_syscall_command_1): Fix typo.
1084 2011-02-21 Tom Tromey <tromey@redhat.com>
1086 * reverse.c: Include cli-utils.h.
1087 * printcmd.c: Include cli-utils.h.
1088 (string_printf): Use skip_spaces.
1089 * cli/cli-utils.h: New file.
1090 * cli/cli-utils.c: New file.
1091 * cli/cli-dump.h (skip_spaces): Move to cli-utils.h.
1092 * cli/cli-dump.c (skip_spaces): Move to cli-utils.c.
1093 * breakpoint.h (get_number, get_number_or_range): Move to
1095 * breakpoint.c: Include cli-utils.h.
1096 (get_number_trailer, get_number, get_number_or_range)
1097 (ep_skip_leading_whitespace): Move to cli-utils.c.
1098 (create_breakpoint_sal, find_condition_and_thread)
1099 (decode_static_tracepoint_spec, watch_command_1)
1100 (watch_maybe_just_location, ep_parse_optional_if_clause)
1101 (catch_fork_command_1, catch_exec_command_1)
1102 (catch_syscall_command_1): Use skip_spaces, skip_to_space.
1103 * Makefile.in (SUBDIR_CLI_OBS): Add cli-utils.o.
1104 (SUBDIR_CLI_SRCS): Add cli-utils.c.
1105 (HFILES_NO_SRCDIR): Add cli-utils.h.
1106 (cli-utils.o): New target.
1108 2011-02-18 Pierre Muller <muller@ics.u-strasbg.fr>
1110 * remote.c (remote_close): Reset INFERIOR_PTID to NULL_PTID
1111 before calling discard_all_inferiors.
1113 2011-02-21 Ulrich Weigand <uweigand@de.ibm.com>
1115 * opencl-lang.c (STRUCT_OCL_TYPE): Remove.
1116 (struct builtin_opencl_type): Remove.
1117 (builtin_opencl_type): Change return type to "struct type **".
1118 (lookup_opencl_vector_type): Update caller.
1119 (opencl_language_arch_info): Copy primitive type vector from gdbarch.
1120 (build_opencl_types): Install plain array of "struct type *"
1121 instead of "struct builtin_opencl_type".
1123 2011-02-21 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
1124 Ulrich Weigand <uweigand@de.ibm.com>
1126 * arm-linux-nat.c: Include "observer.h" and "gdbthread.h".
1127 (PTRACE_GETHBPREGS, PTRACE_SETHBPREGS): Define.
1128 (struct arm_linux_hwbp_cap): New type.
1129 (arm_linux_get_hwbp_cap): New function.
1130 (arm_linux_get_hw_breakpoint_count): Likewise.
1131 (arm_linux_get_hw_watchpoint_count): Likewise.
1132 (arm_linux_can_use_hw_breakpoint): Likewise.
1133 (arm_hwbp_type): New type.
1134 (arm_hwbp_control_t): Likewise.
1135 (struct arm_linux_hw_breakpoint): Likewise.
1136 (struct arm_linux_thread_points): Likewise.
1137 (arm_threads): New global variable.
1138 (arm_linux_find_breakpoints_by_tid): New function.
1139 (arm_hwbp_control_initialize): Likewise.
1140 (arm_hwbp_control_is_enabled): Likewise.
1141 (arm_hwbp_control_disable): Likewise.
1142 (arm_linux_hw_breakpoint_initialize): Likewise.
1143 (arm_linux_get_hwbp_type): Likewise.
1144 (arm_linux_hw_watchpoint_initialize): Likewise.
1145 (arm_linux_hw_breakpoint_equal): Likewise.
1146 (arm_linux_insert_hw_breakpoint1): Likewise.
1147 (arm_linux_remove_hw_breakpoint1): Likewise.
1148 (arm_linux_insert_hw_breakpoint): Likewise.
1149 (arm_linux_remove_hw_breakpoint): Likewise.
1150 (arm_linux_region_ok_for_hw_watchpoint): Likewise.
1151 (arm_linux_insert_watchpoint): Likewise.
1152 (arm_linux_remove_watchpoint): Likewise.
1153 (arm_linux_stopped_data_address): Likewise.
1154 (arm_linux_stopped_by_watchpoint): Likewise.
1155 (arm_linux_watchpoint_addr_within_range): Likewise.
1156 (arm_linux_new_thread): Likewise.
1157 (arm_linux_thread_exit): Likewise.
1158 (_initialize_arm_linux_nat): Install hardware breakpoint/watchpoint
1159 related target callbacks. Register arm_linux_new_thread and
1160 arm_linux_thread_exit.
1161 * arm-tdep.h (arm_pc_is_thumb): Add prototype.
1162 * arm-tdep.c (arm_pc_is_thumb): Make global.
1163 (arm_gdbarch_init): Call set_gdbarch_have_nonsteppable_watchpoint.
1165 2011-02-21 Ulrich Weigand <uweigand@de.ibm.com>
1167 * breakpoint.c (update_watchpoint): Do not attempt to recreate
1168 per-frame locations while within a function epilogue.
1170 2011-02-21 Pierre Muller <muller@ics.u-strasbg.fr>
1172 * ser-mingw.c (ser_windows_close): Reformat comment to better conform
1173 to GNU coding standards.
1175 2011-02-21 Pierre Muller <muller@ics.u-strasbg.fr>
1177 Allow use of mingw native on Windows 95 OS.
1178 * ser-mingw.c (CancelIo): New macro for dynamically loaded DLL entry.
1179 (ser_windows_close): Only call CancelIo if function exists.
1180 (_initialize_ser_windows): Use LoadLirary/GetProcAddress
1181 to check for existence of CancelIo function in kernel32 DLL.
1183 2011-02-21 Hui Zhu <teawater@gmail.com>
1185 * Makefile.in (HFILES_NO_SRCDIR): Add printcmd.h.
1186 * ax-gdb.c (gen_printf_expr_callback): New function.
1187 * ax-gdb.h (gen_printf_expr_callback): Forward declare.
1188 * ax-general.c (ax_memcpy): New function.
1189 (ax_print): Handle "printf".
1191 * ax.h (ax_memcpy): Forward declare.
1192 * common/ax.def (invalid2): Removed.
1193 (printf): New entry.
1194 * printcmd.c (printcmd.h): New include.
1195 (string_printf): New function.
1196 (ui_printf): Removed.
1197 (printf_command): Remove static. Call string_printf.
1198 (eval_command): Call string_printf.
1199 * printcmd.h: New file.
1200 * tracepoint.c (validate_actionline,
1201 encode_actions_1): handle printf_command.
1203 2011-02-19 Michael Snyder <msnyder@vmware.com>
1205 * reverse.c (delete_one_bookmark): Argument is now bookmark
1206 id rather than pointer to bookmark struct.
1207 (delete_bookmark_command): Use get_number_or_range.
1208 (goto_bookmark_command): Parse with get_number instead of strtoul.
1209 (bookmark_1): New function. Print info for one bookmark.
1210 (bookmarks_info): Use get_number_or_range and bookmark_1.
1212 2011-02-18 Michael Snyder <msnyder@vmware.com>
1214 * thread.c (info_threads_command): Re-implement using
1215 get_number_or_range.
1216 (thread_apply_command): Ditto.
1218 2011-02-18 Tom Tromey <tromey@redhat.com>
1220 * common/ax.def: New file.
1221 * ax.h (enum agent_op): Use ax.def.
1222 * ax-general.c (aop_map): Use ax.def.
1224 2011-02-18 Tom Tromey <tromey@redhat.com>
1226 * ax-general.c (aop_map): Add pick and rot.
1227 * dwarf2loc.c (compile_dwarf_to_ax) <DW_OP_over>: Reimplement.
1228 <DW_OP_rot>: Implement.
1229 * ax.h (enum agent_op) <aop_pick, aop_rot>: New constants.
1231 * ax-general.c (ax_pick): New function.
1233 2011-02-18 Tom Tromey <tromey@redhat.com>
1235 * Makefile.in (HFILES_NO_SRCDIR): Don't mention ada-operator.inc.
1237 2011-02-18 Jan Kratochvil <jan.kratochvil@redhat.com>
1238 Tom Tromey <tromey@redhat.com>
1240 * cp-support.c (make_symbol_overload_list_namespace): Do not call
1241 make_symbol_overload_list_block with NULL BLOCK.
1242 * valarith.c (unop_user_defined_p): Resolve also TYPE_CODE_TYPEDEF.
1244 2011-02-18 Pedro Alves <pedro@codesourcery.com>
1246 * breakpoint.c (get_number_trailer): No longer accept a NULL PP.
1247 * breakpoint.h (get_number_or_range): Declare.
1248 * printcmd.c (ALL_DISPLAYS): Declare.
1249 (delete_display): Reimplement taking a display pointer.
1250 (undisplay_command): Accept a range of displays to delete, using
1251 get_number_or_range.
1253 2011-02-18 Pierre Muller <muller@ics.u-strasbg.fr>
1255 * c-valprint.c (c_val_print): Add embedded_offset to address
1256 for arrays of unspecified length.
1257 * p-valprint.c (pascal_val_print): Likewise.
1259 2011-02-18 Yao Qi <yao@codesourcery.com>
1261 * gdb/arm-tdep.c (arm_displaced_step_copy_insn): Move code to ...
1262 (arm_process_displaced_insn): .. here. Remove parameter INSN.
1263 (thumb_process_displaced_insn): New.
1264 * gdb/arm-linux-tdep.c (arm_linux_displaced_step_copy_insn): Update
1265 call to arm_process_displaced_insn.
1266 * gdb/arm-tdep.h : Update declaration of arm_process_displaced_insn.
1268 2011-02-17 Tom Tromey <tromey@redhat.com>
1270 * dwarf2loc.h (dwarf2_compile_expr_to_ax): Declare.
1271 * dwarf2loc.c (dwarf2_compile_expr_to_ax): Rename from
1272 compile_dwarf_to_ax. No longer static. Call
1273 dwarf2_compile_cfa_to_ax.
1274 (locexpr_tracepoint_var_ref): Update.
1275 (loclist_tracepoint_var_ref): Update.
1276 * dwarf2-frame.h (dwarf2_compile_cfa_to_ax): Declare.
1277 * dwarf2-frame.c (execute_cfa_program): Remove 'this_frame'
1278 argument; add 'gdbarch' and 'pc'.
1279 (dwarf2_compile_cfa_to_ax): New function.
1280 (dwarf2_frame_cache): Update.
1282 2011-02-17 Joel Brobecker <brobecker@adacore.com>
1284 * ada-lang.c (ada_type_of_array): Fix the size of the array
1285 in the case of an unconstrained packed array.
1287 2011-02-17 Yao Qi <yao@codesourcery.com>
1289 * common/Makefile.in: Add more targets for make.
1291 2011-02-16 Tom Tromey <tromey@redhat.com>
1293 * dwarf2loc.c (unimplemented): Fix typo.
1295 2011-02-16 Tom Tromey <tromey@redhat.com>
1297 * dwarf2loc.c (unimplemented): Handle unnamed opcodes.
1298 (compile_dwarf_to_ax) <default>: Use unimplemented.
1299 <DW_OP_deref>: Update.
1300 (disassemble_dwarf_expression): Update.
1301 * dwarf2read.c (dwarf_stack_op_name): Remove 'def' argument.
1302 (decode_locdesc): Update.
1303 * dwarf2expr.h (dwarf_stack_op_name): Update.
1305 2011-02-16 Tom Tromey <tromey@redhat.com>
1307 * ax.h (struct aop_map) <name>: Now const.
1309 2011-02-16 Tom Tromey <tromey@redhat.com>
1311 * ax-gdb.c.c (gen_expr) <UNOP_MEMVAL>: Handle value kinds other
1314 2011-02-16 Yao Qi <yao@codesourcery.com>
1316 * infrun.c (get_displaced_step_closure_by_addr): New.
1317 * inferior.h: Declare it.
1318 * arm-tdep.c: (arm_pc_is_thumb): Call
1319 get_displaced_step_closure_by_addr. Adjust MEMADDR if it
1322 2011-02-16 Pedro Alves <pedro@codesourcery.com>
1323 Jan Kratochvil <jan.kratochvil@redhat.com>
1326 * tracepoint.c (memrange_sortmerge): Fix list A's end calculation.
1328 2011-02-16 Pedro Alves <pedro@codesourcery.com>
1329 Jan Kratochvil <jan.kratochvil@redhat.com>
1331 * value.c (value_contents_copy_raw): Extend describing comment.
1332 Assert that the destination contents we're overwriting are wholly
1334 (value_contents_copy): Extend describing comment.
1336 2011-02-16 Pedro Alves <pedro@codesourcery.com>
1337 Jan Kratochvil <jan.kratochvil@redhat.com>
1339 * value.c (value_available_contents_eq): Remove redundant local
1340 variables. Fix available contents comparision.
1341 * value.h (value_available_contents_eq): Extend describing
1344 2011-02-16 Yao Qi <yao@codesourcery.com>
1346 * thread.c (info_threads_command): Add missing i18n markup and remove
1349 2011-02-15 Paul Pluzhnikov <ppluzhnikov@google.com>
1351 * breakpoint.c (longjmp_names): New variable.
1352 (struct breakpoint_objfile_data): New type.
1353 (breakpoint_objfile_key): New variable.
1354 (msym_not_found): New variable.
1355 (msym_not_found_p): New predicate.
1356 (get_breakpoint_objfile_data): New function.
1357 (create_overlay_event_breakpoint): Check per-objfile cache for
1359 (create_longjmp_master_breakpoint): Likewise.
1360 (create_std_terminate_master_breakpoint): Likewise.
1361 (create_exception_master_breakpoint): Likewise.
1362 (_initialize_breakpoint): Register per-objfile data key.
1364 2011-02-15 Paul Pluzhnikov <ppluzhnikov@google.com>
1366 * breakpoint.c ((create_overlay_event_breakpoint): Const-propagate
1368 (create_longjmp_master_breakpoint): Loop over longjmp names.
1369 (create_std_terminate_master_breakpoint): Const-propagate parameter
1371 (update_breakpoints_after_exec): Adjust.
1372 (breakpoint_re_set): Adjust.
1374 2011-02-15 Michael Snyder <msnyder@vmware.com>
1376 * thread.c (info_threads_command): Process arg as thread id,
1377 or list of thread ids.
1378 (thread_find_command): New command.
1379 (_initialize_thread): Document argument for info threads.
1380 Document 'thread find' command.
1381 * NEWS: Document new command "thread find".
1383 2011-02-15 Jan Kratochvil <jan.kratochvil@redhat.com>
1385 * Makefile.in (ACLOCAL_AMFLAGS): Add `-I ../config'.
1386 * aclocal.m4: Regenerated with aclocal-1.11.1.
1387 * common/configure: Regenerate with autoconf-2.64.
1389 2011-02-15 Ken Werner <ken.werner@de.ibm.com>
1391 * opencl-lang.c (build_opencl_types): Set the size of the built-in
1392 bool data type to a size of one byte.
1394 2011-02-15 Pedro Alves <pedro@codesourcery.com>
1395 Jan Kratochvil <jan.kratochvil@redhat.com>
1397 * target.c (memory_xfer_live_readonly_partial): Document where to
1398 look for interface description.
1400 2011-02-15 Yao Qi <yao@codesourcery.com>
1403 * arm-tdep.c (copy_ldr_str_ldrb_strb): Replace PC with SP in
1404 order to store PC value on stack instead of text section.
1406 2011-02-15 Thiago Jung Bauermann <bauerman@br.ibm.com>
1408 * rs6000-tdep.c (IS_EFP_PSEUDOREG): Use correct constant for
1409 the EFP register set size.
1410 (efpr_pseudo_register_read): Use regcache_raw_read_part to read
1411 data from the VMX register.
1412 (efpr_pseudo_register_write): Use regcache_raw_write_part to read
1413 and write data from/to the VMX register.
1415 2011-02-14 Michael Snyder <msnyder@vmware.com>
1417 * command.h (enum command_class): New class 'no_set_class', for
1418 "show" commands without a corresponding "set" command.
1419 * value.c (_initialize_values): Use 'no_set_class' for "show values".
1420 * copying.c (_initialize_copying): Ditto for "show copying" and
1422 * cli/cli-cmds.c (init_cli_cmds): Ditto for "show commands" and
1424 * cli/cli-setshow.c (cmd_show_list): Skip "show" commands for
1425 which there is no corresponding "set" command (eg. "show copying").
1427 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1428 Jan Kratochvil <jan.kratochvil@redhat.com>
1430 * exec.c (section_table_available_memory): Change `len' parameter
1432 * exec.h (section_table_available_memory): Ditto.
1433 * value.h (read_value_memory): Rename the `offset' parameter to
1436 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1437 Jan Kratochvil <jan.kratochvil@redhat.com>
1439 * memrange.c (compare_mem_ranges): Mention sort order in
1441 (normalize_mem_ranges): Add comment. Fix ra->length calculation.
1442 * tracepoint.c (traceframe_available_memory): Extend comment to
1443 mention what happens to RESULT when the target does not support
1446 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1447 Jan Kratochvil <jan.kratochvil@redhat.com>
1449 * value.c (mark_value_bytes_unavailable): Fix indexing the `bef'
1452 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1454 * value.c (value_bits_valid, value_bits_synthetic_pointer):
1455 No longer handle NULL values.
1457 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1459 * exceptions.h (NOT_AVAILABLE_ERROR): New error.
1460 * value.c: Include "exceptions.h".
1461 (require_available): Throw NOT_AVAILABLE_ERROR instead of a
1463 * cp-abi.c: Include gdb_assert.h.
1464 (baseclass_offset): Add `embedded_offset' and `val' parameters.
1465 Assert the method is implemented. Wrap NOT_AVAILABLE_ERROR
1467 * cp-abi.h (baseclass_offset): Add `embedded_offset' and `val'
1468 parameters. No longer returns -1 on error.
1469 (struct cp_abi_ops) <baseclass_offset>: Add `embedded_offset' and
1471 * cp-valprint.c: Include exceptions.h.
1472 (cp_print_value): Handle NOT_AVAILABLE_ERROR errors when fetching
1473 the baseclass_offset. Handle unavailable base classes. Use
1474 val_print_invalid_address.
1475 * p-valprint.c: Include exceptions.h.
1476 (pascal_object_print_value): Handle NOT_AVAILABLE_ERROR errors
1477 when fetching the baseclass_offset. No longer expect
1478 baseclass_offset returning -1. Handle unavailable base classes.
1479 Use val_print_invalid_address.
1480 * valops.c (dynamic_cast_check_1): Rename `contents' parameter to
1481 `valaddr' parameter, and change its type to gdb_byte pointer. Add
1482 `embedded_offset' and `val' parameters. Adjust.
1483 (dynamic_cast_check_2): Rename `contents' parameter to `valaddr'
1484 parameter, and change its type to gdb_byte pointer. Add
1485 `embedded_offset' and `val' parameters. Adjust. No longer expect
1486 baseclass_offset returning -1.
1487 (value_dynamic_cast): Use value_contents_for_printing rather than
1488 value_contents. Adjust.
1489 (search_struct_field): No longer expect baseclass_offset returning
1491 (search_struct_method): If reading memory from the target is
1492 necessary, wrap it in a new value to pass to baseclass_offset. No
1493 longer expect baseclass_offset returning -1.
1494 (find_method_list): No longer expect baseclass_offset returning
1495 -1. Use value_contents_for_printing rather than value_contents.
1496 * valprint.c (val_print_invalid_address): New function.
1497 * valprint.h (val_print_invalid_address): Declare.
1498 * gdbtypes.c (is_unique_ancestor_worker): New `embedded_offset'
1499 and `val' parameters. No longer expect baseclass_offset returning
1501 * gnu-v2-abi.c: Include "exceptions.h".
1502 (gnuv2_baseclass_offset): Add `embedded_offset' and `val'
1503 parameters. Handle unavailable memory. Recurse through
1504 gnuv2_baseclass_offset directly, rather than through
1505 baseclass_offset. No longer returns -1 on not found, instead
1507 * gnu-v3-abi.c (gnuv3_baseclass_offset): Add `embedded_offset' and
1508 `val' parameters. Adjust.
1510 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1512 * tracepoint.c (memrange_sortmerge): Don't merge ranges that are
1513 almost but not quite adjacent.
1515 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1517 * value.h (value_entirely_available): Declare.
1518 * value.c (value_entirely_available): New function.
1519 * c-valprint.c (c_value_print): Don't try fetching the pointer's
1520 real type if the pointer is unavailable.
1522 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1524 * valops.c (value_repeat): Use read_value_memory instead of
1527 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1529 * value.h (value_contents_copy, value_contents_copy_raw): Declare.
1530 * value.c (value_contents_copy_raw, value_contents_copy): New
1532 (value_primitive_field): Use value_contents_copy_raw instead of
1534 * valops.c (value_fetch_lazy): Use value_contents_copy instead of
1536 (value_array, value_slice): Ditto.
1537 * valarith.c (value_subscripted_rvalue): Use
1538 value_contents_copy_raw instead of memcpy.
1540 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1542 <unavailable> references.
1544 * valops.c (get_value_at): Use value_from_contents_and_address,
1545 avoiding read_memory.
1547 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1549 * c-valprint.c (c_val_print): Print a string with unavailable
1550 contents as an array.
1552 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1554 * value.h (unpack_bits_as_long): Delete declaration.
1555 (unpack_value_bits_as_long): Declare.
1556 (unpack_value_field_as_long): Declare.
1557 (value_field_bitfield): Declare.
1558 * value.c (unpack_bits_as_long): Rename to...
1559 (unpack_value_bits_as_long_1): ... this. Add embedded_offset and
1560 value parameters. Return the extracted result in a new output
1561 parameter. If the value contents are unavailable, return false,
1562 otherwise return true.
1563 (unpack_value_bits_as_long): New.
1564 (unpack_field_as_long): Rename to...
1565 (unpack_value_field_as_long_1): ... this. Add embedded_offset and
1566 Add embedded_offset and value parameters. Return the extracted
1567 result in a new output parameter. If the value contents are
1568 unavailable, return false, otherwise return true.
1569 (unpack_value_field_as_long): New.
1570 (unpack_field_as_long_1): New.
1571 (unpack_field_as_long): Reimplement as wrapper around
1572 unpack_value_field_as_long_1.
1573 (value_field_bitfield): New function.
1574 * valops.c (value_fetch_lazy): When fetching a bitfield, use
1575 unpack_value_bits_as_long. Mark the value as unavailable, if it
1577 * jv-valprint.c (java_print_value_fields): Use
1578 value_field_bitfield.
1579 * p-valprint.c (pascal_object_print_value_fields): Use
1580 value_field_bitfield.
1581 * cp-valprint.c (cp_print_value_fields): Use value_field_bitfield.
1583 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1585 * value.c (get_internalvar_integer): Also return the int value of
1586 TYPE_CODE_INT INTERNALVAR_VALUE values.
1587 (set_internalvar): Don't special case TYPE_CODE_INT.
1589 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1591 * value.c (struct internalvar) <enum internalvar_kind>: Remove
1592 INTERNALVAR_POINTER.
1594 (value_of_internalvar): Remove INTERNALVAR_POINTER handling.
1595 (set_internalvar): Remove special TYPE_CODE_PTR handling.
1596 (preserve_one_internalvar): Remove INTERNALVAR_POINTER handling.
1598 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1600 * value.h (value_available_contents_eq): Declare.
1601 * value.c (find_first_range_overlap): New function.
1602 (value_available_contents_eq): New function.
1603 * valprint.c (val_print_array_elements): Use
1604 value_available_contents_eq.
1605 * ada-valprint.c (val_print_packed_array_elements): Use
1606 value_available_contents_eq.
1607 * jv-valprint.c (java_value_print): Use
1608 value_available_contents_eq.
1610 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1612 * target.c (target_read_live_memory): New function.
1613 (memory_xfer_live_readonly_partial): New.
1614 (memory_xfer_partial): If reading from a traceframe, fallback to
1615 reading unavailable read-only memory from read-only regions of
1617 * tracepoint.c (disconnect_tracing): Adjust.
1618 (set_current_traceframe): New, factored out from
1619 set_traceframe_number.
1620 (set_traceframe_number): Reimplement to only change the traceframe
1621 number on the GDB side.
1622 (do_restore_current_traceframe_cleanup): Adjust.
1623 (make_cleanup_restore_traceframe_number): New.
1624 (cur_traceframe_number): New global.
1625 (tfile_open): Set cur_traceframe_number to no traceframe.
1626 (set_tfile_traceframe): New function.
1627 (tfile_trace_find): If looking up a traceframe using any method
1628 other than by number, make sure the current tfile traceframe
1629 matches gdb's current traceframe. Update the current tfile
1630 traceframe if the lookup succeeded.
1631 (tfile_fetch_registers, tfile_xfer_partial)
1632 (tfile_get_trace_state_variable_value): Make sure the remote
1633 traceframe matches gdb's current traceframe.
1634 * remote.c (remote_traceframe_number): New global.
1635 (remote_open_1): Set it to -1.
1636 (set_remote_traceframe): New function.
1637 (remote_fetch_registers, remote_store_registers)
1638 (remote_xfer_memory, remote_xfer_partial)
1639 (remote_get_trace_state_variable_value): Make sure the remote
1640 traceframe matches gdb's current traceframe.
1641 (remote_trace_find): If looking up a traceframe using any method
1642 other than by number, make sure the current remote traceframe
1643 matches gdb's current traceframe. Update the current remote
1644 traceframe if the lookup succeeded.
1645 * infrun.c (fetch_inferior_event): Adjust.
1646 * tracepoint.h (set_current_traceframe): Declare.
1647 (get_traceframe_number, set_traceframe_number): Add describing
1650 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1652 Mark pieces of values as unavailable if the corresponding memory
1655 * valops.c: Include tracepoint.h.
1656 (value_fetch_lazy): Use read_value_memory.
1657 (read_value_memory): New.
1658 * value.h (read_value_memory): Declare.
1659 * dwarf2loc.c (read_pieced_value): Use read_value_memory.
1660 * exec.c (section_table_available_memory): New function.
1661 * exec.h (section_table_available_memory): Declare.
1663 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1665 * Makefile.in (SFILES): Add memrange.c.
1666 (HFILES_NO_SRCDIR): Add memrange.h.
1667 (COMMON_OBS): Add memrange.o.
1668 * memrange.c: New file.
1669 * memrange.h: New file.
1670 * tracepoint.c: Include memrange.h.
1671 (struct mem_range): Delete.
1672 (mem_range_s): Delete.
1673 (traceframe_available_memory): New function.
1674 * tracepoint.h (traceframe_available_memory): Declare.
1676 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1678 * target.h (struct traceframe_info): Forward declare.
1679 (enum target_object): Add TARGET_OBJECT_TRACEFRAME_INFO.
1680 (struct target_ops) <to_traceframe_info>: New field.
1681 (target_traceframe_info): New.
1682 * target.c (update_current_target): Inherit and default
1684 * remote.c (PACKET_qXfer_traceframe_info): New.
1685 (remote_protocol_features): Register qXfer:traceframe-info:read.
1686 (remote_xfer_partial): Handle TARGET_OBJECT_TRACEFRAME_INFO.
1687 (remote_traceframe_info): New.
1688 (init_remote_ops): Install it.
1689 (_initialize_remote): Install "set/show remote traceframe-info"
1691 * tracepoint.h (parse_traceframe_info): Declare.
1692 * tracepoint.c (struct mem_range): New.
1693 (mem_range_s): New typedef.
1694 (struct traceframe_info): New.
1695 (traceframe_info): New global.
1696 (free_traceframe_info): New function.
1697 (clear_traceframe_info): New function.
1698 (start_tracing, tfind_1, set_traceframe_number): Clear traceframe
1700 (build_traceframe_info): New function.
1701 (tfile_traceframe_info): New function.
1702 (init_tfile_ops): Install tfile_traceframe_info.
1703 (traceframe_info_start_memory, free_result): New functions.
1704 (memory_attributes, traceframe_info_elements): New globals.
1705 (parse_traceframe_info, get_traceframe_info): New functions.
1706 * features/traceframe-info.dtd: New file.
1707 * Makefile.in (XMLFILES): Add traceframe-info.dtd.
1709 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1711 Base support for <unavailable> value contents.
1713 * value.h (value_bytes_available): Declare.
1714 (mark_value_bytes_unavailable): Declare.
1715 * value.c (struct range): New struct.
1716 (range_s): New typedef.
1717 (ranges_overlap): New function.
1718 (range_lessthan): New function.
1719 (ranges_contain_p): New function.
1720 (struct value) <unavailable>: New field.
1721 (value_bytes_available): New function.
1722 (mark_value_bytes_unavailable): New function.
1723 (require_not_optimized_out): Constify parameter.
1724 (require_available): New function.
1725 (value_contents_all, value_contents): Require all bytes be
1727 (value_free): Free `unavailable'.
1728 (value_copy): Copy `unavailable'.
1729 * valprint.h (val_print_unavailable): Declare.
1730 * valprint.c (valprint_check_validity): Rename `offset' parameter
1731 to `embedded_offset'. If printing a scalar, check whether the
1732 value chunk is available.
1733 (val_print_unavailable): New.
1734 (val_print_scalar_formatted): Check whether the value is
1736 * python/py-prettyprint.c (apply_val_pretty_printer): Refuse
1737 pretty-printing unavailable values.
1739 2011-02-13 Jan Kratochvil <jan.kratochvil@redhat.com>
1741 Fix const/volatile qualifiers of C++ types, PR c++/12328.
1742 * c-typeprint.c (c_type_print_args): Update the function comment. New
1743 variable param_type, initialize it. Remove const/volatile qualifiers
1744 for language_cplus and !show_artificial. Use param_type.
1746 2011-02-13 Jan Kratochvil <jan.kratochvil@redhat.com>
1748 * symtab.c (find_pc_sect_line): New variable objfile, initialize it
1749 from S. Iterate S using ALL_OBJFILE_SYMTABS. Verify BV for each S.
1750 * symtab.h (struct symtab) <next>: Comment extension.
1752 2011-02-12 Yao Qi <yao@codesourcery.com>
1754 * Makefile.in (CLEANDIRS): Remove duplicated common dir.
1756 2011-02-11 Yao Qi <yao@codesourcery.com>
1758 * common/Makefile.in: Add copyright header.
1760 2011-02-11 Pedro Alves <pedro@codesourcery.com>
1762 * infrun.c (proceed): Move switching out and in of tfind mode from
1764 (fetch_inferior_event): ... to here.
1766 2011-02-11 Yao Qi <yao@codesourcery.com>
1768 * Makefile.in: Remove signals.o from COMMON_OBS. Link
1770 * configure.ac: Add common to sub dir.
1771 * configure: Regenerate.
1773 2011-02-11 Yao Qi <yao@codesourcery.com>
1777 * common/Makefile.in: New.
1778 * common/configure.ac: New.
1779 * common/aclocal.m4: New.
1780 * common/configure: Generate.
1782 2011-02-10 Pedro Alves <pedro@codesourcery.com>
1784 * vec.h (VEC_block_remove): Place VEC_ASSERT_INFO on the right
1785 side of the parenthesis.
1788 2010-07-13 Jakub Jelinek <jakub@redhat.com>
1789 * vec.h (VEC_block_remove): Fix comment.
1791 2011-02-08 Michael Snyder <msnyder@vmware.com>
1793 * linux-nat.c (linux_nat_filter_event): Fix typo in comment.
1795 2011-02-08 Jan Kratochvil <jan.kratochvil@redhat.com>
1797 * i386-tdep.c (i386_process_record): Rename l suffixes to d suffixes
1798 in comments for pcmpgtd, pcmpeqd, psubd, paddd, pcmpgtd, pcmpeqd,
1801 2011-02-08 Jan Kratochvil <jan.kratochvil@redhat.com>
1804 * i386-tdep.c (i386_process_record) <0x660f3807>: Fix the comment to
1806 (i386_process_record) <lddqu>: Fix the opcode to 0xf20ff0.
1807 (i386_process_record) <0x0f3807>: Fix the comment to phsubsw.
1809 2011-02-08 Ulrich Weigand <uweigand@de.ibm.com>
1811 * dwarf2read.c (read_subroutine_type): Set special calling
1812 convention flag for functions compiled by IBM XL C for OpenCL.
1813 * ppc-sysv-tdep.c: Include "dwarf2.h"
1814 (ppc_sysv_abi_push_dummy_call): Implement IBM OpenCL vector types
1816 (do_ppc_sysv_return_value): Add FUNC_TYPE argument. Implement
1817 IBM OpenCL vector types calling convention.
1818 (ppc_sysv_abi_return_value): Pass through FUNC_TYPE.
1819 (ppc_sysv_abi_broken_return_value): Likewise.
1820 (ppc64_sysv_abi_push_dummy_call): Implement IBM OpenCL vector
1821 types calling convention.
1822 (ppc64_sysv_abi_return_value): Likewise.
1823 * spu-tdep.c: Include "dwarf2.h"
1824 (spu_return_value): Implement IBM OpenCL vector types calling
1827 2011-02-08 Ulrich Weigand <uweigand@de.ibm.com>
1829 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): Implement
1830 correct ABI for AltiVec vector arguments.
1832 2011-02-07 Pedro Alves <pedro@codesourcery.com>
1834 * valprint.c (val_print): Extend comment.
1835 * ada-valprint.c (ada_valprint): Rewrite comment deferring
1836 interface explanation to val_print.
1837 (ada_val_print_array): Adjust comment to current interface.
1838 (print_field_values): Adjust comment to current interface.
1839 * c-valprint.c (c_val_print): Rewrite comment deferring interface
1840 explanation to val_print.
1841 * f-valprint.c (f_val_print): Ditto.
1842 * jv-valprint.c (java_val_print): Ditto.
1843 * m2-valprint.c (m2_val_print): Ditto.
1844 * p-valprint.c (pascal_val_print): Ditto.
1846 2011-02-07 Thiago Jung Bauermann <bauerman@br.ibm.com>
1848 * breakpoint.c (parse_breakpoint_sals): Fix description.
1850 2011-02-04 Sami Wagiaalla <swagiaal@redhat.com>
1851 Oguz Kayral <oguzkayral@gmail.com>
1853 * python/py-inferior.c (python_on_normal_stop): New function.
1854 (python_on_resume): New function.
1855 (python_inferior_exit): New function.
1856 (gdbpy_initialize_inferior): Add normal_stop, target_resumed, and
1857 inferior_exit observers.
1858 * python/py-evtregistry.c: New file.
1859 * python/py-threadevent.c : New file.
1860 * python/py-event.c: New file.
1861 * python/py-evts.c: New file.
1862 * python/py-continueevent.c: New file.
1863 * python/py-bpevent.c: New file.
1864 * python/py-signalevent.c: New file.
1865 * python/py-exetiedevent.c: New file.
1866 * python/py-breakpoint.c (gdbpy_breakpoint_from_bpstats): New function.
1867 Move struct breakpoint_object from here...
1868 * python/python-internal.h: ... to here.
1869 * python/py-event.h: New file.
1870 * python/py-events.h: New file.
1871 * Makefile.in (SUBDIR_PYTHON_OBS): Add py-breakpointstopevent.o,
1872 py-continueevent.o, py-event.o, py-eventregistry.o, py-events.o,
1873 py-exitedevent.o, py-signalstopevent.o, and py-stopevent.o.
1874 (SUBDIR_PYTHON_SRCS): Add py-breakpointstopevent.c,
1875 py-continueevent.c, py-event.c, py-eventregistry.c, py-events.c,
1876 py-exitedevent.c, py-signalstopevent.c, and py-stopevent.c.
1877 Add build rules for all the above.
1879 2011-02-04 Tom Tromey <tromey@redhat.com>
1881 * dwarf2read.c (dwarf2_section_empty_p): New function.
1882 (dwarf2_read_section): Use dwarf2_section_empty_p.
1883 (dwarf2_section_size): New function.
1884 (dwarf2_get_section_info): Unconditionally read section.
1885 (dwarf2_read_index): Use dwarf2_section_empty_p.
1886 (partial_read_comp_unit_head): Use dwarf2_section_size.
1887 (dwarf2_symbol_mark_computed): Likewise.
1889 2011-02-04 David Daney <ddaney@caviumnetworks.com>
1891 * NEWS: Add item for "catch syscall" on mips*-linux* targets.
1893 2011-02-04 David Daney <ddaney@caviumnetworks.com>
1895 * mips-linux-tdep.c: Include xml-syscall.h.
1896 (mips_linux_get_syscall_number): New function.
1897 (mips_linux_init_abi): Add calls to
1898 mips_linux_get_syscall_number() and set_xml_syscall_file_name().
1899 * data-directory/Makefile.in (SYSCALLS_FILES): Add
1900 mips-o32-linux.xml, mips-n32-linux.xml and mips-n64-linux.xml
1901 * syscalls/mips-n32-linux.xml: New file.
1902 * syscalls/mips-n64-linux.xml: New file.
1903 * syscalls/mips-o32-linux.xml: New file.
1905 2011-02-04 Ulrich Weigand <ulrich.weigand@linaro.org>
1907 * dwarf2read.c (dwarf2_ranges_read): Skip empty range entries.
1908 Complain about inverted range entries.
1909 (dwarf2_record_block_ranges): Likewise.
1911 2011-02-04 Thiago Jung Bauermann <bauerman@br.ibm.com>
1914 * breakpoint.c (update_watchpoint): Fix name of the
1915 update_global_location_list function.
1916 (print_one_breakpoint): Fix typo.
1917 (_initialize_breakpoint): Remove extra space in hbreak help
1919 * breakpoint.h (struct bp_location) <length>: Fix field
1922 2011-02-04 Pedro Alves <pedro@codesourcery.com>
1924 * regcache.c (registers_changed_ptid): Don't explictly always
1925 clear `current_regcache'. Only clear current_thread_ptid and
1926 current_thread_arch when PTID matches. Only reinit the frame
1927 cache if PTID matches the current inferior_ptid. Move alloca(0)
1929 (registers_changed): ... here.
1931 2011-02-03 Ulrich Weigand <ulrich.weigand@linaro.org>
1933 * arm-tdep.c (arm_skip_stack_protector): Accept any symbol that
1934 starts with __stack_chk_guard as stack guard symbol.
1936 2011-02-03 Andrew Burgess <aburgess@broadcom.com>
1938 * disasm.c (compare_lines): Handle the end of sequence markers
1939 within the line table to better support disassembling over
1940 compilation unit boundaries.
1942 2011-02-02 Ulrich Weigand <ulrich.weigand@linaro.org>
1944 * arm-tdep.c (skip_prologue_function): Add GDBARCH and IS_THUMB
1945 arguments. Skip in-prologue calls to glibc __aeabi_read_tp
1946 implementation even if no symbols are available.
1947 (thumb_analyze_prologue): Update call to skip_prologue_function.
1948 (arm_analyze_prologue): Likewise.
1950 2011-02-02 Ulrich Weigand <ulrich.weigand@linaro.org>
1952 * arm-tdep.c: Include "observer.h".
1953 (arm_prologue_this_id): Use frame PC if get_frame_func returns 0.
1954 (arm_exidx_data_key): New static variable.
1955 (struct arm_exidx_entry, arm_exidx_entry_s): New data types.
1956 (struct arm_exidx_data): Likewise.
1957 (arm_exidx_data_free): New function.
1958 (arm_compare_exidx_entries): Likewise.
1959 (arm_obj_section_from_vma): Likewise.
1960 (arm_exidx_new_objfile): Likewise.
1961 (arm_find_exidx_entry): Likewise.
1962 (arm_exidx_fill_cache): Likewise.
1963 (arm_exidx_unwind_sniffer): Likewise.
1964 (arm_exidx_unwind): New global variable.
1965 (arm_gdbarch_init): Append unwinder arm_exidx_unwind.
1966 (_initialize_arm_tdep): Attach arm_exidx_new_objfile to new_objfile
1967 observer. Register arm_exidx_data_key as objfile data.
1969 2011-02-02 Ulrich Weigand <ulrich.weigand@linaro.org>
1971 * arm-tdep.c (arm_analyze_load_stack_chk_guard): Avoid build break
1972 due to accessing uninitialized variable. Fix indentation.
1974 2011-02-02 Pedro Alves <pedro@codesourcery.com>
1976 * c-valprint.c (c_value_print): When doing virtual base pointer
1977 adjustment, create a new value with adjusted contents rather than
1978 changing the contents of the value being printed (and getting it
1981 2011-02-02 Pedro Alves <pedro@codesourcery.com>
1983 * xml-support.c (xml_find_attribute): New.
1984 (xinclude_start_include): Use it.
1985 * xml-support.h (xml_find_attribute): Declare.
1986 * memory-map.c (memory_map_start_memory)
1987 (memory_map_start_property): Use xml_find_attribute.
1988 * osdata.c (osdata_start_osdata, osdata_start_column): Use
1990 * remote.c (start_thread): Use xml_find_attribute.
1991 * solib-target.c (library_list_start_segment)
1992 (library_list_start_section, library_list_start_library)
1993 (library_list_start_list): Use xml_find_attribute.
1994 * xml-tdesc.c (tdesc_start_target, tdesc_start_feature)
1995 (tdesc_start_union, tdesc_start_struct, tdesc_start_flags)
1996 (tdesc_start_field): Use xml_find_attribute.
1998 2011-02-02 Ulrich Weigand <uweigand@de.ibm.com>
2000 * opencl-lang.c (STRINGIFY): Rename to OCL_STRING.
2001 (BUILD_OCL_VTYPES): Update.
2003 2011-02-02 Joel Brobecker <brobecker@adacore.com>
2005 * configure.ac: Work around non-GNU sed limitation when computing
2006 python version number.
2007 * configure: Regenerate.
2009 2011-02-01 Jan Kratochvil <jan.kratochvil@redhat.com>
2011 Fix debug printing of TYPE_INSTANCE.
2012 * expprint.c (print_subexp_standard) <TYPE_INSTANCE>: New.
2013 (dump_subexp_body_standard) <TYPE_INSTANCE>: New.
2015 2011-02-01 Jan Kratochvil <jan.kratochvil@redhat.com>
2017 Fix debug printing of BINOP_IN, OP_OBJC_MSGCALL,
2018 OP_F77_UNDETERMINED_ARGLIST, OP_COMPLEX, OP_OBJC_SELECTOR, OP_NAME,
2019 OP_OBJC_NSSTRING, OP_F90_RANGE and OP_DECFLOAT.
2020 * ada-operator.inc: Rename the file to ...
2021 * ada-operator.def: ... here, wrap all the entries by macro OP.
2022 * expprint.c (op_name_standard): Remove all the entries. Include
2023 "std-operator.def" instead.
2024 * expression.h (enum exp_opcode): Include "std-operator.def" and
2025 "ada-operator.def". Move all the entries ...
2026 * std-operator.def: ... here, wrap all the entries by macro OP.
2028 2011-01-31 Paul Pluzhnikov <ppluzhnikov@google.com>
2030 * breakpoint.h (remove_jit_event_breakpoints): New prototype.
2031 * breakpoint.c (remove_jit_event_breakpoints): New function.
2032 * jit.c (jit_descriptor_addr): Delete.
2033 (registering_code): Delete.
2034 (clear_int): Delete.
2035 (jit_inferior_data): New variable.
2036 (struct jit_inferior_data): New type.
2037 (get_jit_inferior_data): New function.
2038 (jit_inferior_data_cleanup): New function.
2039 (jit_read_descriptor): Adjust.
2040 (jit_register_code): Adjust.
2041 (jit_breakpoint_re_set_internal): New function; move code here ...
2042 (jit_inferior_init): ... from here.
2043 (jit_breakpoint_re_set): Adjust.
2044 (jit_reset_inferior_data_and_breakpoints): New function.
2045 (jit_inferior_created_observer): Adjust.
2046 (jit_inferior_exit_hook): Adjust.
2047 (jit_executable_changed_observer): New function.
2048 (jit_event_handler): Adjust.
2049 (_initialize_jit): Adjust.
2051 2011-01-31 Michael Snyder <msnyder@vmware.com>
2053 * m32r-tdep.c (m32r_gdbarch_init): Replace accidentally deleted
2056 2011-01-31 Tom Tromey <tromey@redhat.com>
2059 * python/python.c (execute_gdb_command): Call
2060 prevent_dont_repeat.
2061 * top.c (suppress_dont_repeat): New global.
2062 (dont_repeat): Use it.
2063 (prevent_dont_repeat): New function.
2064 * command.h (prevent_dont_repeat): Declare.
2066 2011-01-31 Tom Tromey <tromey@redhat.com>
2068 * infcmd.c (finish_backward): Use breakpoint_set_silent.
2069 * python/py-breakpoint.c (bppy_set_silent): Use
2070 breakpoint_set_silent.
2071 (bppy_set_thread): Use breakpoint_set_thread.
2072 (bppy_set_task): Use breakpoint_set_task.
2073 * breakpoint.h (breakpoint_set_silent, breakpoint_set_thread)
2074 (breakpoint_set_task): Declare.
2075 (make_breakpoint_silent): Remove.
2076 * breakpoint.c (breakpoint_set_silent): New function.
2077 (breakpoint_set_thread): Likewise.
2078 (breakpoint_set_task): Likewise.
2079 (make_breakpoint_silent): Remove.
2081 2011-01-31 Tom Tromey <tromey@redhat.com>
2083 * breakpoint.h (user_breakpoint_p): Declare.
2084 * breakpoint.c (user_breakpoint_p): New function.
2085 (breakpoint_1): Use it.
2086 (save_breakpoints): Likewise.
2088 2011-01-31 Joel Brobecker <brobecker@adacore.com>
2090 * configure.ac: Add handling of Python distribution on Windows.
2091 * python-config.py: If the LIBS, SYSLIBS, LIBPL and/or LINKFORSHARED
2092 sysconfig variables are not defined, then do not use them.
2093 On Windows, if LIBPL is not defined, then use prefix + '/libs'
2094 instead. On Windows, return all paths using forward-slashes
2095 rather than backslashes.
2097 2011-01-31 Joel Brobecker <brobecker@adacore.com>
2099 * configure.ac: Remove fallback behavior for building
2100 against Python. Remove tweaking of Python include path.
2101 Add PYTHON_CPPFLAGS and PYTHON_LIBS substitution.
2102 (AC_TRY_LIBPYTHON): Adjust program used in linking test.
2103 If link is successful, set PYTHON_CPPFLAGS and PYTHON_LIBS.
2104 Always restore CPPFLAGS and LIBS after linking test.
2105 * configure: Regenerated.
2106 * Makefile.in (INTERNAL_CPPFLAGS): Add @PYTHON_CPPFLAGS@.
2107 (INSTALLED_LIBS, CLIBS): Add @PYTHON_LIBS@.
2108 * python/python-internal.h: Adjust includes of Python .h files.
2110 2011-01-31 Joel Brobecker <brobecker@adacore.com>
2112 * tracepoint.c (traceframe_walk_blocks): Add missing i18n markup
2115 2011-01-31 Joel Brobecker <brobecker@adacore.com>
2117 * inflow.c (gdb_has_a_terminal): Fix typo in interactive_mode
2120 2011-01-31 Yao Qi <yao@codesourcery.com>
2122 * arm-linux-nat.c: Update calls to regcache_register_status
2123 instead of regcache_valid_p.
2124 * aix-thread.c: Likewise.
2125 * i386gnu-nat.c: Likewise.
2127 2011-01-29 Jan Kratochvil <jan.kratochvil@redhat.com>
2130 * valops.c (compare_parameters): Verify TYPE_NFIELDS before
2131 touching TYPE_FIELD_ARTIFICIAL.
2133 2011-01-28 Richard Earnshaw <rearnsha@arm.com>
2135 * MAINTAINERS: Move myself from Responsible Maintainers to Authorized
2138 2011-01-28 Pedro Alves <pedro@codesourcery.com>
2140 * tracepoint.c (tfile_xfer_partial): If there's no traceframe
2141 selected, don't try iterating over the traceframe's blocks.
2142 (tfile_has_stack): If there's no traceframe selected, then there's
2144 (tfile_has_registers): If there's no traceframe selected, then
2145 there's no registers.
2147 2011-01-28 Pedro Alves <pedro@codesourcery.com>
2149 * target.c (memory_xfer_partial): No need to restore shadows if we
2150 haven't read anything.
2152 2011-01-28 Pedro Alves <pedro@codesourcery.com>
2154 * mips-tdep.c (mips_print_register): Use get_frame_register_value
2155 and val_print_scalar_formatted.
2157 2011-01-27 Pedro Alves <pedro@codesourcery.com>
2159 * tracepoint.c (tfile_read): New.
2160 (tfile_open): Use it.
2161 (tfile_get_traceframe_address): Use it.
2162 (tfile_trace_find): Use it.
2163 (walk_blocks_callback_func): New typedef.
2164 (match_blocktype): New function.
2165 (traceframe_walk_blocks): New function.
2166 (traceframe_find_block_type): New function.
2167 (tfile_fetch_registers, tfile_xfer_partial)
2168 (tfile_get_trace_state_variable_value): Use
2169 traceframe_find_block_type and tfile_read.
2171 2011-01-26 Kevin Buettner <kevinb@redhat.com>
2173 * remote-mips.c: Add internationalization mark ups. Remove
2174 trailing \n from already marked up strings.
2176 2011-01-26 Tom Tromey <tromey@redhat.com>
2178 * python/py-prettyprint.c (print_string_repr): Clear
2179 'addressprint' option when calling val_print_string.
2180 (print_children): Handle Val_pretty_default. Clear 'addressprint'
2181 option when calling val_print_string.
2183 2011-01-26 Tom Tromey <tromey@redhat.com>
2185 * python/python.c (gdbpy_solib_name): Use gdb_py_longest and
2187 * python/python-internal.h (GDB_PY_LL_ARG, GDB_PY_LLU_ARG): New
2189 (gdb_py_longest, gdb_py_ulongest): New typedefs.
2190 (gdb_py_long_from_longest, gdb_py_long_from_ulongest)
2191 (gdb_py_long_as_ulongest): New defines.
2192 (gdb_py_object_from_longest, gdb_py_object_from_ulongest)
2193 (gdb_py_int_as_long): Declare.
2194 * python/py-value.c (valpy_lazy_string): Use gdb_py_longest,
2195 GDB_PY_LL_ARG, gdb_py_object_from_longest.
2196 (valpy_long): Add comment.
2197 * python/py-utils.c (get_addr_from_python): Use
2198 gdb_py_long_as_ulongest. Handle overflow properly.
2199 (gdb_py_object_from_longest): New function.
2200 (gdb_py_object_from_ulongest): Likewise.
2201 (gdb_py_int_as_long): Likewise.
2202 * python/py-type.c (typy_array): Use gdb_py_int_as_long.
2203 * python/py-symtab.c (salpy_get_pc): Use
2204 gdb_py_long_from_ulongest.
2205 (salpy_get_line): Use PyInt_FromLong.
2206 * python/py-param.c (set_parameter_value): Use
2208 * python/py-lazy-string.c (stpy_get_address): Use
2209 gdb_py_long_from_ulongest.
2210 * python/py-frame.c (frapy_pc): Use gdb_py_long_from_ulongest.
2211 * python/py-cmd.c (cmdpy_completer): Use gdb_py_int_as_long.
2212 * python/py-breakpoint.c (bppy_set_thread): Use
2214 (bppy_set_task): Likewise.
2215 (bppy_set_ignore_count): Likewise.
2216 (bppy_set_hit_count): Likewise.
2217 * python/py-block.c (blpy_get_start): Use
2218 gdb_py_object_from_ulongest.
2219 (blpy_get_end): Likewise.
2220 (gdbpy_block_for_pc): Use gdb_py_ulongest and GDB_PY_LLU_ARG.
2222 2011-01-25 Mathieu Lacage <mathieu.lacage@inria.fr>
2225 * gdb/objfiles.h (struct objfile) <addr_low>: New field.
2226 * gdb/solib.c (solib_read_symbols): Check for addr_low in
2227 equality test for objfile, initialize addr_low if needed.
2229 2011-01-25 Pedro Alves <pedro@codesourcery.com>
2231 * tui/tui-regs.c (tui_register_format): Remove dead code.
2233 2011-01-25 Pedro Alves <pedro@codesourcery.com>
2235 * printcmd.c (print_formatted): Use val_print_scalar_formatted
2236 instead of print_scalar_formatted.
2237 (print_scalar_formatted): Don't handle 's' format strings here,
2238 and add an assertion that we never see such format here.
2239 * valprint.h (val_print_scalar_formatted): Declare.
2240 * valprint.c (val_print_scalar_formatted): New.
2241 * c-valprint.c (c_val_print): Use val_print_scalar_formatted
2242 instead of print_scalar_formatted.
2243 * jv-valprint.c (java_val_print): Ditto.
2244 * p-valprint.c (pascal_val_print): Ditto.
2245 * ada-valprint.c (ada_val_print_1): Ditto.
2246 * f-valprint.c (f_val_print): Ditto.
2247 * infcmd.c (registers_info): Ditto.
2248 * m2-valprint.c (m2_val_print): Ditto.
2250 2011-01-25 Pedro Alves <pedro@codesourcery.com>
2252 * m2-valprint.c (print_unbounded_array): Pass
2253 value_contents_for_printing rather than value_contents, to
2254 m2_print_array_contents. Also pass in the value.
2256 2011-01-25 Jan Kratochvil <jan.kratochvil@redhat.com>
2258 * dwarf2read.c (dwarf2_read_index, write_psymtabs_to_index)
2259 (save_gdb_index_command): Switch to .gdb_index version 4.
2261 2011-01-25 Pedro Alves <pedro@codesourcery.com>
2263 * mi/mi-main.c (get_register): Use get_frame_register_value rather
2264 than frame_register, and always pass a valid value to val_print.
2266 2011-01-25 Pedro Alves <pedro@codesourcery.com>
2268 Centralize printing "<optimized out>".
2270 * valprint.h (val_print_optimized_out): Declare.
2271 * cp-valprint.c (cp_print_value_fields): Use
2272 val_print_optimized_out.
2273 * jv-valprint.c (java_print_value_fields): Ditto.
2274 * p-valprint.c (pascal_object_print_value_fields): Ditto.
2275 * printcmd.c (print_formatted): Ditto.
2276 * valprint.c (valprint_check_validity): Ditto.
2277 (value_check_printable): Ditto.
2278 (val_print_optimized_out): New.
2280 2011-01-25 Pedro Alves <pedro@codesourcery.com>
2282 * infcmd.c (default_print_registers_info): Allocate values so to
2283 never pass a NULL value to val_print.
2285 2011-01-25 Pedro Alves <pedro@codesourcery.com>
2287 * cp-valprint.c (cp_print_value): Treat the 'skip' local as
2288 boolean. Make sure to always pass a value that matches the
2289 contents buffer to callees. Preserve `address' for following
2291 * value.c (value_contents_for_printing_const): New.
2292 (value_address): Constify value argument.
2293 * value.h (value_contents_for_printing_const): Declare.
2294 (value_address): Constify value argument.
2296 2011-01-25 Pedro Alves <pedro@codesourcery.com>
2298 * regcache.c (struct regcache_descr): Rename
2299 sizeof_raw_register_valid_p field to sizeof_raw_register_status,
2300 and sizeof_cooked_register_valid_p to
2301 sizeof_cooked_register_status.
2302 (init_regcache_descr): Adjust.
2303 (struct regcache): Rename register_valid_p field to
2305 (regcache_xmalloc_1, regcache_xfree, regcache_save)
2306 (do_cooked_read): Adjust.
2307 (regcache_valid_p): Rename to ...
2308 (regcache_register_status): ... this. Adjust.
2309 (regcache_invalidate): Adjust.
2310 (regcache_raw_read, regcache_cooked_read, regcache_raw_write):
2312 (regcache_raw_supply): Adjust. If buf i NULL, mark the register
2313 as unavailable, not valid.
2314 (regcache_dump): Adjust.
2315 * regcache.h (enum register_status): New.
2316 (regcache_register_status): Declare.
2317 (regcache_invalidate): Delete declaration.
2318 * corelow.c (get_core_registers): Adjust.
2319 * tracepoint.c (tfile_fetch_registers): Adjust.
2320 * trad-frame.c (REG_VALUE): Rename to ...
2321 (TF_REG_VALUE): ... this.
2322 (REG_UNKNOWN): Rename to ...
2323 (TF_REG_UNKNOWN): ... this.
2324 (trad_frame_set_value, trad_frame_set_unknown): Adjust.
2325 * mi/mi-main.c (register_changed_p): Adjust.
2327 2011-01-25 Pedro Alves <pedro@codesourcery.com>
2329 * regcache.c (struct regcache_descr): Remove outdated comment.
2330 (init_regcache_descr): Remove sizeof_raw_register_valid_p
2332 (regcache_xmalloc): Rename to ...
2333 (regcache_xmalloc_1): ... this. Add `readonly_p' parameter.
2334 Allocate the regcache type accordingly.
2335 (regcache_xmalloc): New as wrapper around regcache_xmalloc_1.
2336 (regcache_xfree): Asser the source is also readonly. Copy sizeof
2337 cooked registers, not raw.
2338 (regcache_dup_no_passthrough): Delete.
2339 (get_thread_arch_regcache): Use regcache_xmalloc_1.
2340 * h8300-tdep.c (h8300_push_dummy_call): Tweak comment to not
2341 mention obsolete write_register_bytes.
2342 * regcache.h (regcache_dup_no_passthrough): Delete declaration.
2344 2011-01-25 Pedro Alves <pedro@codesourcery.com>
2346 Stop remote_read_bytes from handling partial reads itself.
2348 * remote-fileio.c: Include target.h.
2349 (remote_fileio_write_bytes): Delete.
2350 (remote_fileio_func_open, remote_fileio_func_write)
2351 (remote_fileio_func_rename, remote_fileio_func_unlink): Use
2353 (remote_fileio_func_stat): Use target_read_memory and
2354 target_write_memory.
2355 (remote_fileio_func_gettimeofday): Use target_write_memory.
2356 (remote_fileio_func_system): Use target_read_memory.
2357 * remote.c (remote_write_bytes): Make it static.
2358 (remote_read_bytes): Don't handle partial reads here.
2359 * remote.h (remote_read_bytes): Delete declaration.
2361 2011-01-25 Pedro Alves <pedro@codesourcery.com>
2363 Simplify XML parsing a bit.
2365 * xml-support.h (gdb_xml_parse_quick): Declare.
2366 * xml-support.c (gdb_xml_create_parser_and_cleanup_1): Renamed
2367 from gdb_xml_create_parser_and_cleanup, and added `old_chain'
2369 (gdb_xml_create_parser_and_cleanup): Reimplement on top of
2370 gdb_xml_create_parser_and_cleanup_1.
2371 (gdb_xml_parse_quick): New.
2372 * memory-map.c (parse_memory_map): Use gdb_xml_parse_quick.
2373 * osdata.c (osdata_parse): Ditto.
2374 * remote.c (remote_threads_info): Ditto.
2375 * solib-target.c (solib_target_parse_libraries): Ditto.
2376 * xml-syscall.c (syscall_parse_xml): Ditto.
2377 * xml-tdesc.c (tdesc_parse_xml): Ditto.
2379 2011-01-24 Kevin Buettner <kevinb@redhat.com>
2381 * configure.tgt (mips*-*-elf): New; just like mips*-*-*, but
2382 with remote-mips.o added to gdb_target_obs.
2383 * Makefile.in (ALL_TARGET_OBS): Add remote-mips.o.
2385 2011-01-24 Pedro Alves <pedro@codesourcery.com>
2387 * ada-valprint.c (val_print_packed_array_elements): Pass the
2388 correct struct value to val_print.
2389 (ada_val_print_1): Ditto.
2391 2011-01-24 Pedro Alves <pedro@codesourcery.com>
2393 Don't lose embedded_offset in printing routines throughout.
2395 * valprint.h (val_print_array_elements): Change prototype.
2396 * valprint.c (val_print_array_elements): Add `embedded_offset'
2397 parameter, and adjust to pass it down to val_print, while passing
2398 `valaddr' or `address' unmodified. Take embedded_offset into
2399 account when checking repetitions.
2400 * c-valprint.c (c_val_print): Pass embedded_offset to
2401 val_print_array_elements instead of adjusting `valaddr' and
2403 * m2-valprint.c (m2_print_array_contents, m2_val_print): Pass
2404 embedded_offset to val_print_array_elements instead of adjusting
2406 * p-lang.h (pascal_object_print_value_fields): Adjust prototype.
2407 * p-valprint.c (pascal_val_print): Pass embedded_offset to
2408 val_print_array_elements and pascal_object_print_value_fields
2409 instead of adjusting `valaddr'.
2410 (pascal_object_print_value_fields): Add `offset' parameter, and
2412 (pascal_object_print_value): Add `offset' parameter, and adjust to
2414 (pascal_object_print_static_field): Use
2415 value_contents_for_printing/value_embedded_offset, rather than
2417 * ada-valprint.c (val_print_packed_array_elements): Add `offset'
2418 parameter, and adjust to use it. Use
2419 value_contents_for_printing/value_embedded_offset, rather than
2421 (ada_val_print): Rename `valaddr0' parameter to `valaddr'.
2422 (ada_val_print_array): Add `offset' parameter, and adjust to use
2424 (ada_val_print_1): Rename `valaddr0' parameter to `valaddr', and
2425 `embedded_offset' to `offset'. Don't re-adjust `valaddr'.
2426 Instead work with offsets. Use
2427 value_contents_for_printing/value_embedded_offset, rather than
2428 value_contents. Change `defer_val_int' local type to CORE_ADDR,
2429 and use value_from_pointer to extract a target pointer, rather
2430 than value_from_longest.
2431 (print_variant_part): Add `offset' parameter. Replace
2432 `outer_valaddr' parameter by a new `outer_offset' parameter.
2433 Don't re-adjust `valaddr'. Instead pass down adjusted offsets.
2434 (ada_value_print): Use
2435 value_contents_for_printing/value_embedded_offset, rather than
2437 (print_record): Add `offset' parameter, and adjust to pass it
2439 (print_field_values): Add `offset' parameter. Replace
2440 `outer_valaddr' parameter by a new `outer_offset' parameter.
2441 Don't re-adjust `valaddr'. Instead pass down adjusted offsets.
2442 Use value_contents_for_printing/value_embedded_offset, rather than
2444 * d-valprint.c (dynamic_array_type): Use
2445 value_contents_for_printing/value_embedded_offset, rather than
2447 * jv-valprint.c (java_print_value_fields): Add `offset' parameter.
2448 Don't re-adjust `valaddr'. Instead pass down adjusted offsets.
2449 (java_print_value_fields): Take `offset' into account. Don't
2450 re-adjust `valaddr'. Instead pass down adjusted offsets.
2451 (java_val_print): Take `embedded_offset' into account. Pass it to
2452 java_print_value_fields.
2453 * f-valprint.c (f77_print_array_1): Add `embedded_offset'
2454 parameter. Don't re-adjust `valaddr' or `address'. Instead pass
2455 down adjusted offsets.
2456 (f77_print_array): Add `embedded_offset' parameter. Pass it down.
2457 (f_val_print): Take `embedded_offset' into account.
2459 2011-01-21 Joel Brobecker <brobecker@adacore.com>
2461 * inflow.c: Include "gdbcmd.h".
2462 (interactive_mode): New static global, moved here from top.c.
2463 (show_interactive_mode): New function, moved here from top.c.
2464 use gdb_has_a_terminal instead of input_from_terminal_p to
2465 determine the current mode.
2466 (gdb_has_a_terminal): Add handling of the "iteractive-mode"
2468 (_initialize_inflow): Add the "set/show interactive-mode"
2469 commands. Moved here from top.c, after having adjusted slightly
2471 * top.c (interactive_mode, show_interactive_mode): Delete, moved
2473 (input_from_terminal_p): Remove handling of "interactive-mode"
2474 setting, moved to infow.c.
2475 (init_main): Remove creation of the "set/show interactive-mode"
2476 commands, moved to inflow.c.
2478 2011-01-19 Joel Brobecker <brobecker@adacore.com>
2480 * NEWS: Add entry for native ia64-hpux support.
2482 2011-01-19 Tom Tromey <tromey@redhat.com>
2485 * thread.c (free_thread): Free 'name'.
2486 (print_thread_info): Emit thread name. Change CLI output.
2487 (thread_name_command): New function.
2488 (do_captured_thread_select): Emit newline.
2489 (_initialize_thread): Register 'thread name' command.
2490 * target.h (struct target_ops) <to_thread_name>: New field.
2491 (target_thread_name): New macro.
2492 * target.c (update_current_target): Handle to_thread_name.
2493 * python/py-infthread.c (thpy_get_name): New function.
2494 (thpy_set_name): Likewise.
2495 (thread_object_getset): Add "name".
2496 * linux-nat.c (linux_nat_thread_name): New function.
2497 (linux_nat_add_target): Set to_thread_name.
2498 * gdbthread.h (struct thread_info) <name>: New field.
2500 2011-01-18 Joel Brobecker <brobecker@adacore.com>
2502 * ada-valprint.c (ada_print_scalar): Remove unsigned char downcast.
2503 (ada_val_print_1): Likewise.
2505 2011-01-18 Joel Brobecker <brobecker@adacore.com>
2507 * rs6000-tdep.c (rs6000_skip_prologue): Make sure that the prologue
2508 upper limit address is not greater than the function end address
2509 when the upper limit could not be computed using the debugging
2512 2011-01-17 Tom Tromey <tromey@redhat.com>
2514 * cli/cli-cmds.c (apropos_command): Free the compiled regex. Use
2516 * utils.c: Include gdb_regex.h.
2517 (do_regfree_cleanup): New function.
2518 (make_regfree_cleanup): Likewise.
2519 (get_regcomp_error): Likewise.
2520 * gdb_regex.h (make_regfree_cleanup, get_regcomp_error): Declare.
2522 2011-01-17 Tom Tromey <tromey@redhat.com>
2524 * cli/cli-cmds.c (apropos_command): Fix formatting. Don't call
2527 2011-01-17 Pierre Muller <muller@ics.u-strasbg.fr>
2529 * p-exp.y (intvar): New static variable, used to set CURRENT_TYPE
2530 for internal variables.
2531 (last_was_structop): New static variable.
2532 (COMPLETE): New token.
2533 (field_exp): New rule to group all '.' suffix handling.
2534 Add mark_struct_expression calls when approriate to be able
2535 to correctly find fields for completion.
2536 (yylex): Adapt to handle field completion and set INTVAR when
2539 2011-01-14 Yao Qi <yao@codesourcery.com>
2541 * arm-tdep.c (arm_register_reggroup_p): FPS register is in
2542 save_reggroup, restore_reggroup and all_reggroup.
2544 2011-01-14 Joel Brobecker <brobecker@adacore.com>
2546 * ada-valprint. (ada_printchar): Use the correct type length
2547 in call to ada_emit_char.
2548 * c-valprint.c (c_val_print): Remove cast in call to LA_PRINT_CHAR.
2550 2011-01-14 Pierre Muller <muller@ics.u-strasbg.fr>
2552 * solib-som.h (hpux_major_release): Declare variable here.
2553 * solib-som.c: Remove <sys/utsname.h> header.
2554 (DEFAULT_HPUX_MAJOR_RELEASE): New macro.
2555 (hpux_major_release): Make global, change default value to
2556 DEFAULT_HPUX_MAJOR_RELEASE.
2557 (get_hpux_major_release): Simply return HPUX_MAJOR_RELEASE.
2558 * hppa-hpux-nat.c: Add <sys/utsname.h> include.
2559 Add "solib-som.h" header.
2560 (set_hpux_major_release): New function.
2561 (_initialize_hppa_hpux_nat): Call set_hpux_major_release.
2563 2011-01-14 Mike Frysinger <vapier@gentoo.org>
2565 * configure.tgt (*-*-uclinux*): Match more Linux os targets
2567 2011-01-14 Joel Brobecker <brobecker@adacore.com>
2569 * ia64-hpux-nat.c (ia64_hpux_fetch_register): Remove trailing
2570 new-line at end of warning message.
2571 (ia64_hpux_store_register): Remove trailing new-line at end of
2573 * ia64-hpux-tdep.c: Rephrase comment.
2574 * solib-ia64-hpux.c (struct dld_info): Change type of field
2575 dld_flags from "long long" to ULONGEST.
2577 2011-01-14 Pedro Alves <pedro@codesourcery.com>
2579 * target.h (deprecated_child_ops): Delete declaration.
2580 * target.c (deprecated_child_ops): Delete definition.
2582 2011-01-14 Pedro Alves <pedro@codesourcery.com>
2584 * Makefile.in (hpux-thread.o): Delete rule.
2585 * configure.ac: Don't check for HPUX DCE threads support.
2586 * configure, config.in: Regenerate.
2587 * hppa-hpux-nat.c (child_suppress_run): Delete.
2588 (hppa_hpux_child_can_run): Delete.
2589 (_initialize_hppa_hpux_nat): Don't override to_can_run.
2590 * hpux-thread.c: Delete.
2592 2011-01-13 Joel Brobecker <brobecker@adacore.com>
2594 * hpux-thread.c (hpux_pid_to_str): Delete.
2596 2011-01-13 Joel Brobecker <brobecker@adacore.com>
2598 * ada-valprint.c (ada_emit_char): Remove strange code.
2599 Check that c is <= UCHAR_MAX before passing it to isascii.
2600 (char_at): Do not assume that TYPE_LEN is either 1 or 2.
2602 2011-01-13 Joel Brobecker <brobecker@adacore.com>
2604 * top.c (input_from_terminal_p): Restrict the use of interactive_mode
2605 to the case where instream is stdin.
2607 2011-01-13 Joel Brobecker <brobecker@adacore.com>
2609 * ia64-tdep.h (struct regcache): Forward declare.
2610 (struct ia64_infcall_ops): New struct type.
2611 (struct gdbarch_tdep): New fields "find_global_pointer_from_solib"
2613 * ia64-tdep.c (ia64_find_global_pointer_from_dynamic_section):
2614 Renames ia64_find_global_pointer.
2615 (ia64_find_global_pointer, ia64_allocate_new_rse_frame)
2616 (ia64_store_argument_in_slot, ia64_set_function_addr: New function.
2617 (ia64_push_dummy_call): Adjust to use the new tdep ia64_infocall_ops
2619 (ia64_infcall_ops): New static global constant.
2620 (ia64_gdbarch_init): Set tdep->infcall_ops.
2621 * ia64-hpux-nat.c (ia64_hpux_xfer_solib_got): New function.
2622 (ia64_hpux_xfer_partial): Add TARGET_OBJECT_HPUX_SOLIB_GOT handing.
2623 * ia64-hpux-tdep.c: Include "regcache.h", "gdbcore.h" and "inferior.h".
2624 (ia64_hpux_dummy_code): New static global constant.
2625 (ia64_hpux_push_dummy_code, ia64_hpux_allocate_new_rse_frame)
2626 (ia64_hpux_store_argument_in_slot, ia64_hpux_set_function_addr)
2627 (ia64_hpux_dummy_id, ia64_hpux_find_global_pointer_from_solib):
2629 (ia64_hpux_infcall_ops): New static global constant.
2630 (ia64_hpux_init_abi): Install gdbarch and tdep methods needed
2631 for inferior function calls to work properly on ia64-hpux.
2633 2011-01-13 Joel Brobecker <brobecker@adacore.com>
2635 * target.h (enum target_object): Add TARGET_OBJECT_HPUX_UREGS.
2636 * ia64-tdep.h (struct frame_info): forward declaration.
2637 (struct gdbarch_tdep): Add field size_of_register_frame.
2638 * ia64-tdep.c (ia64_access_reg): Use tdep->size_of_register_frame
2639 to determine the size of the register frame.
2640 (ia64_size_of_register_frame): New function.
2641 (ia64_gdbarch_init): Set tdep->size_of_register_frame.
2642 * ia64-hpux-tdep.c: Include "target.h" and "frame.h".
2643 (IA64_HPUX_UREG_REASON): New macro.
2644 (ia64_hpux_stopped_in_syscall, ia64_hpux_size_of_register_frame):
2646 (ia64_hpux_init_abi): Set tdep->size_of_register_frame.
2647 * ia64-hpux-nat.c (ia64_hpux_xfer_uregs): New function.
2648 (ia64_hpux_xfer_partial): Add handling of TARGET_OBJECT_HPUX_UREGS
2651 2011-01-13 Joel Brobecker <brobecker@adacore.com>
2653 Add support for ia64-hpux.
2654 * config/ia64/hpux.mh, ia64-hpux-nat.c, ia64-hpux-tdep.c,
2655 ia64-hpux-tdep.h, solib-ia64-hpux.c, solib-ia64-hpux.h: New files.
2657 * configure.host: Add handling for ia64-hpux hosts. Add associated
2659 * configure.tgt: Add handling for ia64-hpux targets.
2660 * Makefile.in (ALL_64_TARGET_OBS): Add ia64-hpux-tdep.o.
2661 (HFILES_NO_SRCDIR): Add ia64-hpux-tdep.h.
2662 (ALLDEPFILES): Add ia64-hpux-nat.c ia64-hpux-tdep.c.
2664 2011-01-13 Joel Brobecker <brobecker@adacore.com>
2666 [ttrace] Compute thread list immediately after attach.
2667 * inf_ttrace_attach (inf_ttrace_create_threads_after_attach):
2669 (inf_ttrace_attach): Use it.
2671 2011-01-13 Joel Brobecker <brobecker@adacore.com>
2673 * libunwind-frame.c (libunwind_frame_cache): Do not return NULL
2674 if we could not determine the frame's function address. Instead,
2675 use the frame's PC, and then continue.
2677 2011-01-13 Joel Brobecker <brobecker@adacore.com>
2679 * libunwind-frame.c (__LITTLE_ENDIAN, __BIG_ENDIAN): Define if
2680 not already defined.
2682 2011-01-13 Joel Brobecker <brobecker@adacore.com>
2684 * ia64-tdep.c (ia64_struct_type_p): New function.
2685 (ia64_extract_return_value): Handle integral values that are
2686 less than 8 bytes long.
2687 (ia64_push_dummy_call): Likewise.
2689 2011-01-13 Joel Brobecker <brobecker@adacore.com>
2691 * ia64-tdep.c (floatformat_ia64_ext_little): Renames
2692 floatformat_ia64_ext.
2693 (floatformat_ia64_ext_big): New static const.
2694 (floatformats_ia64_ext): Set first entry to &floatformat_ia64_ext_big.
2696 2011-01-12 Tom Tromey <tromey@redhat.com>
2698 * mi/mi-symbol-cmds.c (mi_cmd_symbol_list_lines): Fix error
2700 * mi/mi-main.c (mi_cmd_thread_select): Fix error messages.
2701 (mi_cmd_thread_list_ids): Likewise.
2702 (mi_cmd_data_list_changed_registers): Likewise.
2703 (mi_cmd_data_list_register_values): Likewise.
2704 (mi_cmd_data_write_register_values): Likewise.
2705 (mi_cmd_data_evaluate_expression): Likewise.
2706 (mi_cmd_data_read_memory): Likewise.
2707 (mi_cmd_data_read_memory_bytes): Likewise.
2708 (mi_cmd_data_write_memory): Likewise.
2709 (mi_cmd_enable_timings): Likewise.
2710 * mi/mi-interp.c (mi_cmd_interpreter_exec): Fix error messages.
2711 * mi/mi-cmd-var.c (mi_cmd_var_create): Fix error messages.
2712 (mi_cmd_var_delete): Likewise.
2713 (mi_cmd_var_set_format): Likewise.
2714 (mi_cmd_var_show_format): Likewise.
2715 (mi_cmd_var_info_num_children): Likewise.
2716 (mi_cmd_var_list_children): Likewise.
2717 (mi_cmd_var_info_type): Likewise.
2718 (mi_cmd_var_info_expression): Likewise.
2719 (mi_cmd_var_show_attributes): Likewise.
2720 (mi_cmd_var_assign): Likewise.
2721 (mi_cmd_var_update): Likewise.
2722 (mi_cmd_enable_pretty_printing): Likewise.
2723 (mi_cmd_var_set_update_range): Likewise.
2724 * mi/mi-cmd-target.c (mi_cmd_target_file_get): Fix error
2726 (mi_cmd_target_file_put): Likewise.
2727 (mi_cmd_target_file_delete): Likewise.
2728 * mi/mi-cmd-stack.c (mi_cmd_stack_list_frames): Fix error
2730 (mi_cmd_stack_info_depth): Likewise.
2731 (mi_cmd_stack_list_locals): Likewise.
2732 (mi_cmd_stack_list_args): Likewise.
2733 (mi_cmd_stack_select_frame): Likewise.
2734 (mi_cmd_stack_select_frame): Likewise.
2735 (mi_cmd_stack_info_frame): Likewise.
2736 * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file): Fix error
2738 (mi_cmd_file_list_exec_source_files): Likewise.
2739 * mi/mi-cmd-env.c (mi_cmd_env_pwd): Fix error messages.
2740 (mi_cmd_env_cd): Likewise.
2741 (mi_cmd_env_path): Likewise.
2742 (mi_cmd_env_dir): Likewise.
2743 (mi_cmd_inferior_tty_show): Likewise.
2744 * mi/mi-cmd-disas.c (mi_cmd_disassemble): Fix error messages.
2745 * mi/mi-cmd-break.c (mi_cmd_break_insert): Fix error messages.
2746 (mi_cmd_break_watch): Likewise.
2748 2011-01-12 Thiago Jung Bauermann <bauerman@br.ibm.com>
2750 * ppc-linux-nat.c (booke_cmp_hw_point): Fix whitespace.
2751 (ppc_linux_insert_hw_breakpoint): Likewise.
2752 (ppc_linux_remove_hw_breakpoint): Likewise.
2753 (ppc_linux_insert_watchpoint): Likewise.
2755 2011-01-12 Andrew Burgess <aburgess@broadcom.com>
2756 Jan Kratochvil <jan.kratochvil@redhat.com>
2758 PR fortran/11104 and DWARF unbound arrays detection.
2759 * dwarf2read.c (read_subrange_type): Set zero length on unspecified
2760 upper bound. Set TYPE_HIGH_BOUND_UNDEFINED if not language_ada on
2761 unspecified upper bound.
2762 * eval.c (evaluate_subexp_standard) <multi_f77_subscript>: Remove
2763 variables array_size_array, tmp_type and offset_item. New variable
2764 array. Remove call to f77_get_upperbound. New variables array_type
2765 and index. Call value_subscripted_rvalue for each dimenasion. Remove
2766 the final call to deprecated_set_value_type.
2768 2011-01-12 Jan Kratochvil <jan.kratochvil@redhat.com>
2770 Make value allocations more lazy.
2771 * ada-lang.c (coerce_unspec_val_to_type): Use allocate_value_lazy
2772 instead of allocate_value and set_value_lazy when possible.
2773 * dwarf2loc.c (dwarf2_evaluate_loc_desc_full): Use allocate_value_lazy
2774 instead of allocate_value and set_value_lazy.
2775 * findvar.c (value_of_register_lazy): Likewise.
2776 (read_var_value): Remove V preallocation, call just check_typedef in
2777 advance. Move allocate_value to LOC_CONST, LOC_LABEL,
2778 LOC_CONST_BYTES. Use allocate_value_lazy in LOC_STATIC, LOC_ARG,
2779 LOC_REF_ARG, LOC_LOCAL, LOC_BLOCK. Set ADDR instead of
2780 set_value_address and break in LOC_BLOCK. Use allocate_value_lazy and
2781 remove lval_memory set in LOC_REGPARM_ADDR. Use allocate_value_lazy
2782 in LOC_UNRESOLVED and LOC_OPTIMIZED_OUT. Add setting lval_memory at
2783 the end, remove set_value_lazy there.
2784 * valarith.c (value_subscripted_rvalue): Use allocate_value_lazy
2785 instead of allocate_value and set_value_lazy when possible.
2786 * valops.c (value_fetch_lazy): Do nop for value_optimized_out VAL.
2787 * value.c (allocate_computed_value): Use allocate_value_lazy instead
2788 of allocate_value and set_value_lazy.
2789 (value_from_contents_and_address): Use allocate_value_lazy instead of
2790 allocate_value and set_value_lazy when possible.
2792 2011-01-12 Andrew Burgess <aburgess@broadcom.com>
2794 * disasm.c (dump_insns): Support dumping opcodes for MI.
2795 * mi/mi-cmd-disas.c (mi_cmd_disassemble): Allow mode to control
2796 dumping of instruction opcodes.
2798 2011-01-09 Robert Millan <rmh@gnu.org> (tiny patch)
2800 * configure.tgt: Detect GNU/kFreeBSD and set `gdb_osabi'
2803 2011-01-11 Tom Tromey <tromey@redhat.com>
2805 * thread.c (do_captured_thread_select): Emit newline before
2808 2011-01-11 Michael Snyder <msnyder@vmware.com>
2810 * s390-tdep.c: Comment cleanup, mostly periods and spaces.
2811 * score-tdep.c: Ditto.
2812 * score-tdep.h: Ditto.
2813 * ser-base.c: Ditto.
2814 * ser-go32.c: Ditto.
2817 * ser-mingw.c: Ditto.
2818 * ser-pipe.c: Ditto.
2820 * ser-unix.c: Ditto.
2821 * sh64-tdep.c: Ditto.
2822 * shnbsd-nat.c: Ditto.
2826 * solib-darwin.c: Ditto.
2827 * solib-frv.c: Ditto.
2829 * solib-irix.c: Ditto.
2830 * solib-osf.c: Ditto.
2831 * solib-pa64.c: Ditto.
2832 * solib-som.c: Ditto.
2833 * solib-spu.c: Ditto.
2834 * solib-sunos.c: Ditto.
2835 * solib-svr4.c: Ditto.
2837 * sol-thread.c: Ditto.
2841 * sparc64-linux-tdep.c: Ditto.
2842 * sparc64-tdep.c: Ditto.
2843 * sparc-linux-nat.c: Ditto.
2844 * sparc-linux-tdep.c: Ditto.
2845 * sparc-sol2-nat.c: Ditto.
2846 * sparc-sol2-tdep.c: Ditto.
2847 * sparc-tdep.c: Ditto.
2848 * sparc-tdep.h: Ditto.
2849 * spu-tdep.c: Ditto.
2850 * stabsread.c: Ditto.
2851 * stabsread.h: Ditto.
2859 * target-descriptions.c: Ditto.
2860 * target-descriptions.h: Ditto.
2862 * target-memory.c: Ditto.
2863 * terminal.h: Ditto.
2866 * tracepoint.c: Ditto.
2867 * tracepoint.h: Ditto.
2868 * trad-frame.h: Ditto.
2869 * typeprint.c: Ditto.
2871 2011-01-11 Michael Snyder <msnyder@vmware.com>
2873 * ui-file.c: Comment cleanup, mostly periods and spaces.
2878 * v850-tdep.c: Ditto.
2879 * valarith.c: Ditto.
2881 * valprint.c: Ditto.
2882 * valprint.h: Ditto.
2887 * vax-tdep.c: Ditto.
2891 * windows-nat.c: Ditto.
2892 * windows-tdep.c: Ditto.
2893 * xcoffread.c: Ditto.
2894 * xcoffsolib.c: Ditto.
2895 * xml-support.c: Ditto.
2896 * xstormy16-tdep.c: Ditto.
2897 * xtensa-tdep.c: Ditto.
2898 * xtensa-tdep.h: Ditto.
2900 2011-01-11 Thiago Jung Bauermann <bauerman@br.ibm.com>
2902 * breakpoint.c (resources_needed_watchpoint): Fix indentation.
2903 * gdbtypes.c (is_scalar_type_recursive): Fix formatting.
2905 2011-01-11 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
2906 Thiago Jung Bauermann <bauerman@br.ibm.com>
2908 Implement support for PowerPC BookE ranged watchpoints.
2910 (struct breakpoint_ops) <resources_needed>: New method.
2911 Initialize to NULL in all existing breakpoint_ops instances.
2912 (struct breakpoint) <exact>: New field.
2913 (target_exact_watchpoints): Declare external global.
2914 * breakpoint.c (target_exact_watchpoints): New global flag.
2915 (update_watchpoint): Set b->type to bp_hardware_watchpoint and
2916 b->enable_state to bp_enabled before calling
2917 hw_watchpoint_used_count.
2918 (hw_watchpoint_used_count): Iterate over all bp_locations in a
2919 watchpoint. Call breakpoint's breakpoint_ops.resources_needed
2921 (insert_watchpoint, remove_watchpoint): Use fixed length of 1 byte
2922 if the watchpoint is exact.
2923 (resources_needed_watchpoint): New function.
2924 (watchpoint_breakpoint_ops): Add resources_needed_watchpoint.
2925 (watch_command_1): Set b->exact if the user asked for an exact
2926 watchpoint and one can be set.
2927 (can_use_hardware_watchpoint): Add exact_watchpoints argument.
2928 Pass fixed length of 1 to target_region_ok_for_hw_watchpoint if
2929 the user asks for an exact watchpoint and one can be set. Return
2930 number of needed debug registers to watch the expression.
2931 * gdbtypes.c (is_scalar_type): New function, based on
2932 valprint.c:scalar_type_p.
2933 (is_scalar_type_recursive): New function.
2934 * gdbtypes.h (is_scalar_type_recursive): Declare.
2935 * ppc-linux-nat.c (ppc_linux_region_ok_for_hw_watchpoint): Always
2936 handle regions when ranged watchpoints are available.
2937 (create_watchpoint_request): New function.
2938 (ppc_linux_insert_watchpoint, ppc_linux_remove_watchpoint): Use
2939 create_watchpoint_request.
2940 * rs6000-tdep.c (show_powerpc_exact_watchpoints): New function.
2941 (_initialize_rs6000_tdep): Add `exact-watchpoints' boolean to the
2942 `set powerpc' and `show powerpc' commands.
2943 * target.h (struct target_ops) <to_region_ok_for_hw_watchpoint>:
2944 Mention documentation comment in the target macro.
2945 (target_region_ok_for_hw_watchpoint): Document return value.
2947 2011-01-11 Thiago Jung Bauermann <bauerman@br.ibm.com>
2949 * breakpoint.c (update_watchpoint): Decide on using a software or
2950 hardware watchpoint after the bp_locations are created.
2952 2010-01-11 Thiago Jung Bauermann <bauerman@br.ibm.com>
2954 Convert hardware watchpoints to use breakpoint_ops.
2955 * breakpoint.h (breakpoint_ops) <insert>: Rename to...
2956 <insert_location>: ... this. Return int instead of void.
2957 Accept pointer to struct bp_location instead of pointer to
2958 struct breakpoint. Adapt all implementations.
2959 (breakpoint_ops) <remove>: Rename to...
2960 <remove_location>: ... this. Accept pointer to struct bp_location
2961 instead of pointer to struct breakpoint. Adapt all implementations.
2962 * breakpoint.c (insert_catchpoint): Delete function.
2963 (insert_bp_location): Call the watchpoint or catchpoint's
2964 breakpoint_ops.insert method.
2965 (remove_breakpoint_1): Call the watchpoint or catchpoint's
2966 breakpoint_ops.remove method.
2967 (insert_watchpoint, remove_watchpoint): New functions.
2968 (watchpoint_breakpoint_ops): New structure.
2969 (watch_command_1): Initialize the OPS field.
2970 * inf-child.c (inf_child_insert_fork_catchpoint)
2971 (inf_child_remove_fork_catchpoint, inf_child_insert_vfork_catchpoint)
2972 (inf_child_remove_vfork_catchpoint, inf_child_insert_exec_catchpoint)
2973 (inf_child_remove_exec_catchpoint, inf_child_set_syscall_catchpoint):
2975 (inf_child_target): Remove initialization of to_insert_fork_catchpoint,
2976 to_remove_fork_catchpoint, to_insert_vfork_catchpoint,
2977 to_remove_vfork_catchpoint, to_insert_exec_catchpoint,
2978 to_remove_exec_catchpoint and to_set_syscall_catchpoint.
2979 * target.c (update_current_target): Change default implementation of
2980 to_insert_fork_catchpoint, to_remove_fork_catchpoint,
2981 to_insert_vfork_catchpoint, to_remove_vfork_catchpoint,
2982 to_insert_exec_catchpoint, to_remove_exec_catchpoint and
2983 to_set_syscall_catchpoint to return_one.
2984 (debug_to_insert_fork_catchpoint, debug_to_insert_vfork_catchpoint)
2985 (debug_to_insert_exec_catchpoint): Report return value.
2986 * target.h (to_insert_fork_catchpoint, to_insert_vfork_catchpoint)
2987 (to_insert_exec_catchpoint): Change declaration to return int instead
2990 2011-01-11 Michael Snyder <msnyder@vmware.com>
2992 * arm-tdep.c: Internationalization.
2995 * fork-child.c: Ditto.
2996 * nto-procfs.c: Ditto.
2997 * ppc-sysv-tdep.c: Ditto.
2999 * remote-mips.c: Ditto.
3001 * rs6000-nat.c: Ditto.
3002 * rs6000-tdep.c: Ditto.
3006 * xml-support.c: Ditto.
3007 * mi/mi-cmd-break.c: Ditto.
3008 * mi/mi-cmd-var.c: Ditto.
3009 * mi/mi-interp.c: Ditto.
3010 * mi/mi-main.c: Ditto.
3012 2011-01-11 Andrew Burgess <aburgess@broadcom.com>
3014 * remote-sim.c (gdbsim_store_register): Update API to
3015 sim_store_register to check more error conditions.
3017 2011-01-10 Michael Snyder <msnyder@vmware.com>
3019 * nto-procfs.c: Comment cleanup, mostly periods and spaces.
3020 * nto-tdep.c: Ditto.
3021 * nto-tdep.h: Ditto.
3022 * objc-exp.y: Ditto.
3023 * objc-lang.c: Ditto.
3024 * objfiles.c: Ditto.
3025 * objfiles.h: Ditto.
3026 * observer.c: Ditto.
3027 * opencl-lang.c: Ditto.
3030 * parser-defs.h: Ditto.
3033 * posix-hdep.c: Ditto.
3034 * ppcbug-rom.c: Ditto.
3035 * ppc-linux-nat.c: Ditto.
3036 * ppc-linux-tdep.c: Ditto.
3037 * ppc-linux-tdep.h: Ditto.
3038 * ppcnbsd-tdep.c: Ditto.
3039 * ppcobsd-tdep.c: Ditto.
3040 * ppcobsd-tdep.h: Ditto.
3041 * ppc-sysv-tdep.c: Ditto.
3042 * ppc-tdep.h: Ditto.
3043 * printcmd.c: Ditto.
3044 * proc-abi.c: Ditto.
3045 * proc-flags.c: Ditto.
3047 * proc-utils.h: Ditto.
3048 * progspace.h: Ditto.
3049 * prologue-value.c: Ditto.
3050 * prologue-value.h: Ditto.
3051 * psympriv.h: Ditto.
3053 * p-typeprint.c: Ditto.
3054 * p-valprint.c: Ditto.
3055 * ravenscar-sparc-thread.c: Ditto.
3056 * ravenscar-thread.c: Ditto.
3057 * ravenscar-thread.h: Ditto.
3059 * regcache.c: Ditto.
3060 * regcache.h: Ditto.
3062 * remote-fileio.c: Ditto.
3063 * remote-fileio.h: Ditto.
3065 * remote-m32r-sdi.c: Ditto.
3066 * remote-mips.c: Ditto.
3067 * remote-sim.c: Ditto.
3068 * rs6000-aix-tdep.c: Ditto.
3069 * rs6000-nat.c: Ditto.
3070 * rs6000-tdep.c: Ditto.
3072 2011-01-10 Michael Snyder <msnyder@vmware.com>
3074 * charset.c (validate): Internationalization.
3075 * coffread.c (read_one_sym): Ditto.
3076 * dwarf2read.c (dwarf2_attach_fields_to_type): Ditto.
3077 * h8300-tdep.c (H8300_extract_return_value): Ditto.
3078 * inflow.c (new_tty): Ditto.
3079 * iq2000-tdep.c (iq2000_breakpoint_from_pc): Ditto.
3080 * m32c-tdep.c (m32c_return_value): Ditto.
3081 * mep-tdep.c (mep_store_return_value): Ditto.
3082 * score-tdep.c (score7_fetch_insn): Ditto.
3083 * ser-mingw.c (pipe_windows_open): Ditto.
3084 * sh64-tdep.c (sh64_extract_return_value): Ditto.
3085 * spu-tdep.c (spu_register_type): Ditto.
3086 * tracepoint.c (trace_find_command): Ditto.
3087 * valarith.c (value_pos): Ditto.
3089 2011-01-10 Joel Brobecker <brobecker@adacore.com>
3091 * ada-valprint.c (printstr): Minor comment reformatting.
3093 2011-01-08 Michael Snyder <msnyder@vmware.com>
3095 * m32r-rom.c (m32r_upload_command): Fix up ARI warnings for _
3098 2011-01-08 Michael Snyder <msnyder@vmware.com>
3100 * h8300-tdep.c: Comment cleanup, mostly periods and spaces.
3101 * hppa-hpux-tdep.c: Ditto.
3102 * hppa-linux-nat.c: Ditto.
3103 * hppa-linux-tdep.c: Ditto.
3104 * hppanbsd-tdep.c: Ditto.
3105 * hppa-tdep.c: Ditto.
3106 * hppa-tdep.h: Ditto.
3107 * hpux-thread.c: Ditto.
3108 * i386-cygwin-tdep.c: Ditto.
3109 * i386-darwin-nat.c: Ditto.
3110 * i386gnu-nat.c: Ditto.
3111 * i386-linux-nat.c: Ditto.
3112 * i386-linux-tdep.c: Ditto.
3113 * i386-nat.c: Ditto.
3114 * i386-nat.h: Ditto.
3115 * i386nbsd-tdep.c: Ditto.
3116 * i386-sol2-nat.c: Ditto.
3117 * i386-stub.c: Ditto.
3118 * i386-tdep.c: Ditto.
3119 * i386-tdep.h: Ditto.
3120 * i387-tdep.c: Ditto.
3121 * ia64-linux-nat.c: Ditto.
3122 * ia64-linux-tdep.c: Ditto.
3123 * ia64-tdep.c: Ditto.
3127 * inferior.c: Ditto.
3128 * inferior.h: Ditto.
3134 * iq2000-tdep.c: Ditto.
3135 * irix5-nat.c: Ditto.
3141 * jv-typeprint.c: Ditto.
3142 * jv-valprint.c: Ditto.
3143 * language.c: Ditto.
3144 * language.h: Ditto.
3145 * linespec.c: Ditto.
3146 * linux-fork.c: Ditto.
3147 * linux-nat.c: Ditto.
3148 * linux-thread-db.c: Ditto.
3149 * lm32-tdep.c: Ditto.
3151 2011-01-08 Michael Snyder <msnyder@vmware.com>
3153 * m2-exp.y: Comment cleanup, mostly periods and spaces.
3155 * m2-typeprint.c: Ditto.
3156 * m2-valprint.c: Ditto.
3157 * m32c-tdep.c: Ditto.
3158 * m32r-linux-nat.c: Ditto.
3159 * m32r-rom.c: Ditto.
3160 * m32r-tdep.c: Ditto.
3161 * m32r-tdep.h: Ditto.
3162 * m68hc11-tdep.c: Ditto.
3163 * m58klinux-nat.c: Ditto.
3164 * m68k-tdep.c: Ditto.
3165 * m88k-tdep.c: Ditto.
3166 * m88k-tdep.h: Ditto.
3167 * machoread.c: Ditto.
3168 * macrocmd.c: Ditto.
3169 * macroexp.c: Ditto.
3170 * macrotab.c: Ditto.
3173 * mdebugread.c: Ditto.
3174 * mdebugread.h: Ditto.
3177 * memory-map.h: Ditto.
3178 * mep-tdep.c: Ditto.
3179 * microblaze-rom.c: Ditto.
3180 * microblaze-tdep.c: Ditto.
3182 * mips-irix-tdep.c: Ditto.
3183 * mips-linux-nat.c: Ditto.
3184 * mips-linux-tdep.c: Ditto.
3185 * mips-linux-tdep.h: Ditto.
3186 * mipsnbsd-nat.c: Ditto.
3187 * mipsnbsd-tdep.c: Ditto.
3188 * mipsread.c: Ditto.
3189 * mips-tdep.c: Ditto.
3190 * mips-tdep.h: Ditto.
3191 * mn10300-linux-tdep.c: Ditto.
3192 * mn10300-tdep.c: Ditto.
3193 * mn10300-tdep.h: Ditto.
3196 * moxie-tdep.c: Ditto.
3197 * moxie-tdep.h: Ditto.
3200 2011-01-08 Mike Frysinger <vapier@gentoo.org>
3202 * bfin-tdep.h (BFIN_A0_DOT_W_REGNUM): Fix typo in name.
3204 2011-01-08 Robert Millan <rmh@gnu.org>
3206 * fbsd-nat.c (fbsd_find_memory_regions): Fix typo.
3208 2011-01-07 Michael Snyder <msnyder@vmware.com>
3210 * charset.c (_initialize_charset): Fix typo in string.
3212 2011-01-07 Michael Snyder <msnyder@vmware.com>
3214 * mi/mi-cmd-disas.c (mi_cmd_disassemble): Mark up error message
3216 * tui/tui-layout.c (tui_set_layout_for_display_command):
3217 Split line so that operator goes to beginning of line.
3218 * tui/tui-winsource.c (tui_horizontal_source_scroll): Move
3219 assignment out of if statement.
3221 2011-01-07 Michael Snyder <msnyder@vmware.com>
3223 * ada-lang.c: Comment cleanup, mostly periods and spaces.
3224 * ada-lang.h: Ditto.
3225 * ada-tasks.c: Ditto.
3226 * ada-valprint.c: Ditto.
3227 * aix-threads.c: Ditto.
3228 * alpha-linux-nat.c: Ditto.
3229 * alpha-linux-tdep.c: Ditto.
3230 * alpha-mdebug-tdep.c: Ditto.
3231 * alpha-nat.c: Ditto.
3232 * alpha-osf1-tdep.c: Ditto.
3233 * alpha-tdep.c: Ditto.
3234 * alphabsd-nat.c: Ditto.
3235 * alphabsd-tdep.c: Ditto.
3236 * amd64-darwin-tdep.c: Ditto.
3237 * amd64-linux-nat.c: Ditto.
3238 * amd64-linux-tdep.c: Ditto.
3239 * amd64-sol2-tdep.c: Ditto.
3240 * amd64-tdep.c: Ditto.
3241 * amd64-fbsd-tdep.c: Ditto.
3242 * amd64-nbsd-tdep.c: Ditto.
3243 * amd64-obsd-tdep.c: Ditto.
3244 * amd64-linux-nat.c: Ditto.
3245 * amd64-linux-tdep.c: Ditto.
3246 * arm-tdep.c: Ditto.
3247 * arm-tdep.h: Ditto.
3248 * armnbsd-nat.c: Ditto.
3249 * avr-tdep.c: Ditto.
3250 * bfin-tdep.c: Ditto.
3252 * c-typeprintc: Ditto.
3253 * c-valprint.c: Ditto.
3254 * coff-pe-read.h: Ditto.
3255 * coffreead.c: Ditto.
3256 * cris-tdep.c: Ditto.
3258 * darwin-nat-info.c: Ditto.
3259 * darwin-nat.c: Ditto.
3260 * dbug-rom.c: Ditto.
3264 * dec-thread.c: Ditto.
3266 * demangle.c: Ditto.
3267 * dicos-tdep.c: Ditto.
3268 * dictionary.c: Ditto.
3269 * dictionary.h: Ditto.
3270 * dink32-rom.c: Ditto.
3272 * doublest.c: Ditto.
3274 * dummy-frame.c: Ditto.
3275 * dwarf2-frame.c: Ditto.
3276 * dwarf2expr.c: Ditto.
3277 * dwarf2loc.c: Ditto.
3278 * dwarf2read.c: Ditto.
3282 * event-top.h: Ditto.
3283 * exceptions.c: Ditto.
3284 * exceptions.h: Ditto.
3286 * expprint.c: Ditto.
3287 * expression.h: Ditto.
3291 * f-typeprint.c: Ditto.
3292 * f-valprint.c: Ditto.
3293 * fbsd-nat.c: Ditto.
3295 * fork-child.c: Ditto.
3298 * frv-linux-tdep.c: Ditto.
3299 * frv-tdep.c: Ditto.
3301 * gdb-stabs.h: Ditto.
3302 * gdb_assert.h: Ditto.
3303 * gdb_string.h: Ditto.
3304 * gdb_thread_db.h: Ditto.
3305 * gdb_wait.h: Ditto.
3306 * gdbarch.sh: Ditto.
3308 * gdbthread.h: Ditto.
3309 * gdbtypes.c: Ditto.
3310 * gdbtypes.h: Ditto.
3313 * gnu-v2-abi.c: Ditto.
3314 * gnu-v3-abi.c: Ditto.
3315 * go32-nat.c: Ditto.
3316 * gdbarch.c: Regenerate.
3317 * gdbarch.h: Regenerate.
3319 2011-01-07 Michael Snyder <msnyder@vmware.com>
3321 * ax-gdb.c: Adjust some long output strings.
3322 * breakpoint.c: Ditto.
3327 * linux-nat.c: Ditto.
3328 * solib-pa64.c: Ditto.
3329 * solib-som.c: Ditto.
3331 2011-01-06 Tom Tromey <tromey@redhat.com>
3335 * python/python.c (GdbMethods): Add "newest_frame" method.
3336 * python/python-internal.h (gdbpy_newest_frame): Declare.
3337 * python/py-frame.c (gdbpy_newest_frame): New function.
3339 2010-01-06 Paul Pluzhnikov <ppluzhnikov@google.com>
3341 * jit.h (struct jit_code_entry): use ULONGEST for symfile_size.
3342 * jit.c (jit_debug): New variable.
3343 (show_jit_debug): New function.
3344 (struct target_buffer): Use ULONGEST.
3345 (bfd_open_from_target_memory): Likewise.
3346 (jit_register_code, jit_inferior_init): Add debug output.
3347 (_initialize_jit): Register "debug jit" command.
3349 2011-01-06 Tom Tromey <tromey@redhat.com>
3351 * frame.h (enum frame_type) <INLINE_FRAME>: Fix comment.
3352 * python/py-frame.c (gdbpy_initialize_frames): Add INLINE_FRAME
3355 2011-01-06 Tom Tromey <tromey@redhat.com>
3357 * python/py-frame.c (frapy_block): Use get_frame_block.
3359 2011-01-06 Joel Brobecker <brobecker@adacore.com>
3361 Do not stop on SIGPRIO signals by default
3362 * infrun.c (_initialize_infrun): Unset signal_stop and
3363 signal_print for TARGET_SIGNAL_PRIO.
3365 2011-01-06 Joel Brobecker <brobecker@adacore.com>
3367 * ada-tasks.c: Fix style violation in comment.
3369 2011-01-06 Joel Brobecker <brobecker@adacore.com>
3371 * linespec.c (decode_compound, find_method): Remove trailing \n
3372 at end of error string.
3373 * solib-irix.c (irix_current_sos): Likewise.
3374 * varobj.c (uninstall_variable): Likewise.
3376 2011-01-06 Joel Brobecker <brobecker@adacore.com>
3378 * copyright.py: New script.
3379 * copyright.sh (byhand): Add *.ads, *.adb, *.gpr and *.inc.
3380 Launch emacs without exec'ing. Call copyright.py afterwards.
3382 2011-01-05 Michael Snyder <msnyder@vmware.com>
3384 * addrmap.c: Shorten lines of >= 80 columns.
3385 * arch-utils.c: Ditto.
3386 * arch-utils.h: Ditto.
3388 * ax-general.c: Ditto.
3390 * blockframe.c: Ditto.
3391 * breakpoint.c: Ditto.
3392 * buildsym.c: Ditto.
3394 * c-typeprint.c: Ditto.
3396 * coffread.c: Ditto.
3400 * cp-namespace.c: Ditto.
3401 * cp-support.c: Ditto.
3402 * dbug-rom.c: Ditto.
3407 * dictionary.c: Ditto.
3409 * doublest.c: Ditto.
3410 * dwarf2-frame.c: Ditto.
3411 * dwarf2expr.c: Ditto.
3412 * dwarf2loc.c: Ditto.
3413 * dwarf2read.c: Ditto.
3416 * event-loop.c: Ditto.
3417 * event-loop.h: Ditto.
3418 * exceptions.h: Ditto.
3420 * expprint.c: Ditto.
3421 * expression.h: Ditto.
3423 * f-valprint.c: Ditto.
3425 * frame-base.c: Ditto.
3426 * frame-unwind.c: Ditto.
3427 * frame-unwind.h: Ditto.
3431 * gdb-stabs.h: Ditto.
3432 * gdb_assert.h: Ditto.
3433 * gdb_dirent.h: Ditto.
3434 * gdb_obstack.h: Ditto.
3436 * gdbtypes.c: Ditto.
3437 * gdbtypes.h: Ditto.
3438 * inf-ttrace.c: Ditto.
3443 * inline-frame.h: Ditto.
3444 * language.c: Ditto.
3445 * language.h: Ditto.
3446 * libunwind-frame.c: Ditto.
3447 * libunwind-frame.h: Ditto.
3448 * linespec.c: Ditto.
3449 * linux-nat.c: Ditto.
3450 * linux-nat.h: Ditto.
3451 * linux-thread-db.c: Ditto.
3452 * machoread.c: Ditto.
3453 * macroexp.c: Ditto.
3454 * macrotab.c: Ditto.
3457 * mdebugread.c: Ditto.
3462 * objfiles.c: Ditto.
3463 * objfiles.h: Ditto.
3465 * p-typeprint.c: Ditto.
3466 * p-valprint.c: Ditto.
3468 * printcmd.c: Ditto.
3469 * proc-events.c: Ditto.
3471 * progspace.c: Ditto.
3472 * progspace.h: Ditto.
3473 * psympriv.h: Ditto.
3476 * regcache.c: Ditto.
3477 * regcache.h: Ditto.
3478 * remote-fileio.c: Ditto.
3480 * ser-mingw.c: Ditto.
3482 * ser-unix.c: Ditto.
3485 * solib-frv.c: Ditto.
3486 * solib-irix.c: Ditto.
3487 * solib-osf.c: Ditto.
3488 * solib-pa64.c: Ditto.
3489 * solib-som.c: Ditto.
3490 * solib-sunos.c: Ditto.
3491 * solib-svr4.c: Ditto.
3492 * solib-target.c: Ditto.
3496 * stabsread.c: Ditto.
3497 * stabsread.c: Ditto.
3500 * symfile-mem.c: Ditto.
3506 * target-descriptions.c: Ditto.
3507 * target-memory.c: Ditto.
3510 * terminal.h: Ditto.
3513 * tracepoint.c: Ditto.
3514 * tracepoint.h: Ditto.
3518 * user-regs.c: Ditto.
3519 * user-regs.h: Ditto.
3521 * valarith.c: Ditto.
3523 * valprint.c: Ditto.
3524 * valprint.h: Ditto.
3529 * xcoffread.c: Ditto.
3530 * xcoffsolib.c: Ditto.
3531 * xcoffsolib.h: Ditto.
3532 * xml-syscall.c: Ditto.
3533 * xml-tdesc.c: Ditto.
3535 2011-01-05 Michael Snyder <msnyder@vmware.com>
3537 * cli/cli-cmds.c: Shorten lines of >= 80 columns.
3538 * cli/cli-decode.c: Ditto.
3539 * cli/cli-dump.c: Ditto.
3540 * cli/cli-logging.c: Ditto.
3541 * cli/cli-script.c: Ditto.
3542 * cli/cli-setshow.c: Ditto.
3543 * common/signals.c: Ditto.
3544 * mi/mi-cmd-break.c: Ditto.
3545 * mi/mi-cmd-disas.c: Ditto.
3546 * mi/mi-cmd-stack.c: Ditto.
3547 * mi/mi-cmd-var.c: Ditto.
3548 * mi/mi-cmds.c: Ditto.
3549 * mi/mi-common.h: Ditto.
3550 * mi/mi-console.c: Ditto.
3551 * mi/mi-interp.c: Ditto.
3552 * mi/mi-main.c: Ditto.
3553 * osf-share/cma_attr.c: Ditto.
3554 * osf-share/cma_deb_core.h: Ditto.
3555 * osf-share/cma_debug_client.h: Ditto.
3556 * osf-share/cma_handle.h: Ditto.
3557 * osf-share/cma_mutex.h: Ditto.
3558 * osf-share/cma_stack_int.h: Ditto.
3559 * osf-share/cma_tcb_defs.h: Ditto.
3560 * python/py-auto-load.c: Ditto.
3561 * python/py-breakpoint.c: Ditto.
3562 * python/py-cmd.c: Ditto.
3563 * python/py-frame.c: Ditto.
3564 * python/py-objfile.c: Ditto.
3565 * python/py-param.c: Ditto.
3566 * python/py-progspace.c: Ditto.
3567 * python/py-symbol.c: Ditto.
3568 * python/py-value.c: Ditto.
3569 * python/python-internal.h: Ditto.
3570 * python/python.c: Ditto.
3571 * tui/tui-data.c: Ditto.
3572 * tui/tui-disasm.c: Ditto.
3573 * tui/tui-hooks.c: Ditto.
3574 * tui/tui-io.c: Ditto.
3575 * tui/tui-layout.c: Ditto.
3576 * tui/tui-regs.c: Ditto.
3577 * tui/tui-source.c: Ditto.
3578 * tui/tui-stack.c: Ditto.
3579 * tui/tui-win.c: Ditto.
3580 * tui/tui-windata.c: Ditto.
3581 * tui/tui-winsource.c: Ditto.
3583 2011-01-05 Joel Brobecker <brobecker@adacore.com>
3585 * configure.ac, gdb.1: Copyright year update.
3587 2011-01-03 Jan Kratochvil <jan.kratochvil@redhat.com>
3589 * frame.c (get_prev_frame_1) <UNWIND_INNER_ID>: New variables
3590 this_pc_in_block, morestack_msym and morestack_name. Check for
3591 "__morestack" minimal symbol there.
3593 2011-01-03 Joel Brobecker <brobecker@adacore.com>
3595 * symfile.c (find_sym_fns): Add call to dont_repeat.
3597 2011-01-01 Joel Brobecker <brobecker@adacore.com>
3599 Copyright year update in most files (performed by copyright.sh).
3601 2011-01-01 Joel Brobecker <brobecker@adacore.com>
3603 * top.c (print_gdb_version): Update copyright year in version output.
3605 For older changes see ChangeLog-2010.
3611 version-control: never