1 Sun Feb 27 21:05:06 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
3 * config/m68k/tm-apollo68b.h: Remove HAVE_68881 define; it is
6 * i387-tdep.c, i386-tdep.c i386v-nat.c, i386aix-nat.c,
7 i386m3-nat.c, config/m68k/tm-m68k.h, i960-tdep.c
8 config/i960/tm-i960.h, remote-nindy.c, config/m88k/tm-m88k.h,
9 m88k-tdep.c: Use floatformat.h instead of ieee-float.h.
10 * sparc-tdep.c: Remove now-obsolete ieee-float.h stuff
11 * findvar.c: Update comment regarding ieee-float.h.
13 Sun Feb 27 21:39:48 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
15 * config/i386/tm-i386v4.h (I386V4_SIGTRAMP_SAVED_PC, IN_SIGTRAMP,
16 FRAME_CHAIN, FRAMELESS_FUNCTION_INVOCATION, FRAME_SAVED_PC):
17 Define to make backtracing through the various sigtramp handlers
19 * i386-tdep.c (i386v4_sigtramp_saved_pc): New routine to fetch
20 the saved pc from ucontext on the stack for SVR4 signal handling.
22 Fri Feb 25 09:41:11 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
24 * remote.c, remote-mon.c, remote-utils.c, remote-utils.h,
25 target.h, remote-es.c, remote-nindy.c: Don't set baud rate if
26 baud_rate is -1. Remove sr_get_baud_rate and sr_set_baud_rate;
27 just use the global variable itself. When printing baud rate,
28 don't print a baud rate if baud_rate is -1.
30 * coffread.c (read_coff_symtab): Pass mst_file_* to
31 record_minimal_symbol for C_STAT symbols. Put C_EXT and C_STAT
32 symbols in the minimal symbols regardless of SDB_TYPE.
34 Thu Feb 24 08:30:33 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
36 * breakpoint.h (enum bptype): New type bp_through_sigtramp.
37 (bpstat_what_main_action): New code BPSTAT_WHAT_THROUGH_SIGTRAMP.
38 * breakpoint.c (bpstat_what): Return BPSTAT_WHAT_THROUGH_SIGTRAMP
39 if we hit a bp_through_sigtramp breakpoint. Remove kludge which
40 ignored bs->stop for a bp_step_resume breakpoint.
41 * infrun.c (wait_for_inferior): Make a through_sigtramp_breakpoint
42 which performs one (the check_sigtramp2 one) of the functions
43 which had been handled by the step_resume_breakpoint. For each
44 use of the step_resume_breakpoint, make it still use the
45 step_resume_breakpoint, use the through_sigtramp_breakpoint, or
47 Deal with BPSTAT_WHAT_THROUGH_SIGTRAMP return from bpstat_what.
48 When setting the frame address of the step resume breakpoint, set
49 it to the address for frame *before* the call instruction is
52 * mips-tdep.c (mips_print_register): Print integers using
53 print_scalar_formatted rather than duplicating all the
54 CC_HAS_LONG_LONG and so on.
55 (mips_push_dummy_frame): Use read_register_gen rather than using
56 read_register and then putting it back in target format with
57 store_unsigned_integer. If registers are more than 4 bytes, give
58 an error rather than have some registers overwrite other
60 #if 0 unused include of opcode/mips.h.
62 * symfile.h: Don't declare arguments for coff_getfilename.
64 * defs.h: Revert Kung change regarding FORCE_LONG_LONG.
66 Thu Feb 24 08:06:52 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
68 * configure.in (hppa*-*-osf*): New configuration.
69 * config/pa/hppaosf.mt: New target makefile fragment.
70 * config/pa/tm-hppao.h: New target include file.
72 Thu Feb 24 04:29:19 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
74 * exec.c (print_section_info): Print entry point for exec_bfd only.
75 * ser-unix.c (wait_for): Fix typo in HAVE_TERMIO case.
76 * dwarfread.c: Remove second inclusion of <sys/types.h>, which
77 causes problems if <sys/types.h> has no multiple inclusion protection.
79 Wed Feb 23 16:28:55 1994 Jeffrey A. Law (law@cygnus.com)
81 * tm-hppa.h (CALL_DUMMY): Add two NOP instructions to the end of
82 the call dummy to avoid kernel bugs in HPUX, BSD, and OSF1.
83 (CALL_DUMMY_LENGTH): Changed accordingly.
85 Wed Feb 23 16:21:25 1994 Stu Grossman (grossman at cygnus.com)
87 * sparc-stub.c (trap_low): Make trap handler work for arbitrary
88 numbers of register windows.
90 * sparclite/hello.c: Add factorial function for testing.
91 * salib.c: Use macros instead of constants for I/O addresses to
92 make 931 support easier.
93 * sparclite.h: Change constraint for LOC to "rJ" to force use of
94 register in sta/lda instructions.
96 Wed Feb 23 10:39:18 1994 Jim Kingdon (kingdon@rtl.cygnus.com)
98 * dbxread.c (process_one_symbol): Set
99 block_address_function_relative for COFF like we do for ELF and SOM.
101 Sat Feb 19 03:17:32 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
103 * mdebugread.c (new_psymtab): Pass in section_offsets and set
105 * mdebugread.c (handle_psymbol_enumerators): New function to enter
106 the enumerators of an ecoff enum into the partial symbol table.
107 * mdebugread.c (parse_partial_symbols): Call it.
108 * symfile.c (reread_symbols): Initialize objfile->*_psymbols.next.
109 * symmisc.c (dump_psymtab): Fix typo, clean up output of section
110 offsets. Cast psymtab->read_symtab to PTR before passing it to
112 * i386-tdep.c (i386_skip_prologue): Skip over instructions that
113 set up the global offset table pointer in pic compiled code.
114 * config/mips/tm-mips.h (FIX_CALL_DUMMY): For big endian targets,
115 error() on TYPE_CODE_FLT arguments whose size is greater than 8,
116 swap all other TYPE_CODE_FLT arguments as mips_push_arguments
117 ensures that floats are promoted to doubles before they are pushed
120 Fri Feb 18 23:12:59 1994 Stu Grossman (grossman at cygnus.com)
122 * sparclite/Makefile.in, sparclite/salib.c, sparclite/sparclite.h:
123 Fixup cache_on and flush_i_cache so that they work for both the
124 930 and 932 processors. Rewrite most low level funcs (uart
125 access & cache stuff) to use new ASI access macros in sparclite.h.
126 Also make it easy to access second serial port.
128 Fri Feb 18 22:17:33 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
130 * hp300ux-nat.c: Don't incloude <sys/dir.h>, <sys/ioctl.h>, or
131 <sys/stat.h>; not needed.
133 Fri Feb 18 08:26:29 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
135 * stack.c (print_frame_info): In "pathological" case, don't
136 distrust the line number information.
138 Fri Feb 18 16:51:14 1994 Kung Hsu (kung@mexican.cygnus.com)
140 * mips-tdep.c (mips_print_register): handle 64 bits register.
141 * valprint.c (print_longest): fix a bug in printing 64 bits value.
143 Fri Feb 18 08:26:29 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
147 * Makefile.in (install): Do the sed for program_transform_name
148 ourselves instead of worrying about INSTALL_XFORM. This enables
149 users to override INSTALL_PROGRAM in the standard way.
151 * Makefile.in (c-exp.tab.o, ch-exp.tab.o, m2-exp.tab.o): Don't
152 depend on Makefile.in.
154 * defs.h, valprint.c: Make longest_to_int a function not a macro.
155 Only test against INT_MIN if a LONGEST is bigger than an int.
157 * README: Change GhostScript to Ghostscript.
159 Fri Feb 18 07:30:55 1994 Jim Kingdon (kingdon@cygnus.com)
161 * config/rs6000/{tm-rs6000lynx.h,nm-rs6000lynx.h,xm-rs6000lynx.h}:
162 Rename to tm-rs6000ly.h, nm-rs6000ly.h, xm-rs6000ly.h for 14
163 character file names.
164 * Makefile.in (ALLPARAM): Add these files.
166 * config/mips/littlemips64.mt: Rename to mipsel64.mt for 14
167 character file names.
168 * Makefile.in: Add Kung's new mips64 files.
170 Thu Feb 17 17:25:47 1994 Kung Hsu (kung@mexican.cygnus.com)
172 * configure.in: add mips64-*-elf, mips64-*-ecoff, mips64el-*-elf,
173 mips64el-*-ecoff and mips64-big-*.
174 * defs.h: get rid of FORCE_LONG_LONG.
175 * mips-tdep.c (mips_find_saved_regs): add sd and sdc1 instruction
176 parsing. Change register size to be MIPS_REGSIZE.
178 Thu Feb 17 09:30:22 1994 David J. Mackenzie (djm@thepub.cygnus.com)
180 * corelow.c, exec.c, irix5-nat.c, mipsread.c, objfiles.c,
181 osfsolib.c, rs6000-nat.c, solib.c, symfile.c, utils.c,
182 xcoffexec.c: Use bfd_get_error and bfd_set_error and new error names.
184 Fri Feb 11 21:47:24 1994 Steve Chamberlain (sac@sphagnum.cygnus.com)
186 * remote-hms.c (readchar, hms_open, hms_fetch_register): Made more robust.
187 (remove_commands, add_commands): Add/remove hms-drain when target
190 Fri Feb 11 16:11:38 1994 Stu Grossman (grossman at cygnus.com)
192 * configure.in: Add Lynx/rs6000 support.
193 * lynx-nat.c: Clean up some Sparc stuff. Clean up ptrace error
194 messages. Add rs6000 support. Don't try to modify unwritable
196 * rs6000-nat.c: Move lots of native dependent stuff (like core
197 file support) from rs6000-tdep.c & xcoffexec.c to here.
198 * rs6000-tdep.c: Move native dependent stuff to nat.c.
199 * xcoffexec.c: Move native dependent stuff to nat.c.
200 * config/rs6000/nm-rs6000.h: Move defs of SOLIB_* macros to here
202 * config/rs6000/tm-rs6000.h: Remove defs of SOLIB_* funcs, cuz they're
204 * config/rs6000/tm-rs6000lynx.h, config/rs6000/xm-rs6000lynx.h:
205 New files to support Lynx/rs6000.
207 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
209 * README: Remove note about gcc warnings on alpha, these should be
211 * c-exp.y, ch-exp.y, core.c, corelow.c, eval.c, fork-child.c,
212 m2-exp.y, minsyms.c, nlmread.c, parse.c, putenv.c, regex.c
213 remote-utils.c, stabsread.c: Include <string.h>.
214 * regex.c: Include "defs.h", change re_comp argument to const char *.
215 * infptrace.c (fetch_register, store_inferior_registers): Change
216 regaddr to type CORE_ADDR.
217 * config/alpha/alpha-nw.mt, config/alpha/alpha-osf1.mt (MT_CFLAGS):
218 Remove, no longer necessary now that we use bfd_vma for a CORE_ADDR.
220 Mon Feb 7 09:21:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
222 * symtab.h: Always define BYTE_BITFIELD to nothing.
224 Mon Feb 7 08:44:17 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
226 * config/m68k/{m68k-em.mt,tm-m68k-em.h}: Remove; no longer used.
227 * configure.in: Remove comment about m68k-em.mt.
228 * Makefile.in: Remove references.
230 Mon Feb 7 08:22:42 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
232 * defs.h [BFD64]: Use BFD_HOST_64_BIT, not nonexistent
235 Sun Feb 6 06:55:15 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
237 * target.c (target_preopen): If target_kill doesn't remove the
238 target from the stack, use pop_target to do it.
240 * coffread.c (process_coff_symbol, case C_TPDEF): Don't set name
241 of TYPE_CODE_PTR or TYPE_CODE_FUNC types. This parallels similar
242 changes to stabsread.c from summer 1993.
244 * remote-udi.c (udi_files_info): If prog_name is NULL, just skip
245 printing the program, rather than passing NULL to printf.
246 (udi_detach): Set udi_session_id to -1 so that udi_close doesn't
247 try to call UDIDisconnect again. Print better message.
248 (udi_kill): Just call UDIDisconnect ourselves, rather than doing
250 (udi_create_inferior): If udi_session_id is negative, open a new
251 TIP rather than giving an error.
253 * config/mips/mipsm3.mh, config/i386/i386m3.mh,
254 config/ns32k/ns32km3.mh: Define NAT_FILE.
255 * config/nm-m3.h: Change guard from _OS_MACH3_H_ and _OS_MACH3_H
256 (it was inconsistent and namespace-wrong) to NM_M3_H.
257 * m3-nat.c (mach_really_wait): Change parameter name to ourstatus.
258 (m3_open): New function.
260 * TODO: Update Mach section.
262 * Makefile.in: Remove "rapp" stuff; it is superseded by gdbserver.
264 Sun Feb 6 13:26:21 1994 Per Bothner (bothner@kalessin.cygnus.com)
266 * printcmd.c (printf_command): Add missing single-letter
267 backslash-escape sequences, and improve error message.
269 Sun Feb 6 06:55:15 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
271 * corelow.c (solib_add_stub, core_open): Pass address of from_tty
272 rather than trying to shove an int into a pointer and back out
273 again. This avoids compiler warnings.
275 * defs.h (alloca): Declare as void *, not char *, on hpux.
276 Don't prototype it, just declare the return type.
278 Sun Feb 6 03:25:41 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
280 * config/i386/tm-sun386.h, config/i386/tm-symmetry.h
281 (REGISTER_CONVERT_TO_RAW): Add missing backslash.
283 Sat Feb 5 08:03:41 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
285 * remote-mips.c (mips_fetch_registers): If regno is FP_REGNUM or
286 ZERO_REGNUM, just read it as zero without talking to the board.
288 * config/i386/tm-i386aix.h (REGISTER_CONVERT_TO_RAW): Add missing
290 * i386-tdep.c (i386_extract_return_value): Pass TYPE_LENGTH (type)
291 to store_floating, not nonexistent variable len.
293 * remote-mips.c (mips_insert_breakpoint, mips_remove_breakpoint):
295 (mips_store_word): Change calling convention to return errors, and
296 to provide old contents if the caller wants it.
297 (mips_xfer_memory): Deal with errors from mips_store_word.
298 * config/mips/tm-idt.h, config/mips/tm-idtl.h: Remove BREAKPOINT
299 define now that remote-mips.c doesn't use BREAKPOINT.
301 * remote-mips.c (mips_create_inferior): Call warning if arguments
302 specified, and then execute "set args" command. Call error, not
303 mips_error, if executable file not specified.
305 * remote-e7000.c: Replace "snoop" command (e7000_noecho) with
308 * config/rs6000/tm-rs6000.h (STORE_STRUCT_RETURN): Don't cast
311 Sat Feb 5 05:27:05 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
313 * value.h (print_longest): Rename "value" to "val" in prototype
314 declaration because some compilers don't like arguments whose
315 names are the same as types.
316 * remote.c (remote_xfer_memory): Cast "myaddr" to unsigned char *
317 before passing it to remote_*_bytes.
319 Fri Feb 4 15:53:18 1994 Steve Chamberlain (sac@cygnus.com)
321 * h8500-tdep.c (saved_pc_after_call): The size of the
322 pc is memory model dependent. (segmented_command,
323 unsegmented_command, _initialize_h8500_tdep): New commands to
325 * remote-e7000.c (_initialize_remote_e7000): Change name of snoop
327 * remote-hms.c (hms_load): Remove breakpoints when loaded.
328 (hms_wait): Use new status structure
329 (hms_open): Push the target here. (hms_before_main_loop): Not
330 here. (supply_val, hms_fetch_register, hms_store_register): Cope
331 with H8/500 names too. (hms_fetch_register): Take out REGISTER_TYPE.
332 * sh-tdep.c (show_regs, initialize_sh_tdep): New command to print
333 all registers in a compact way.
335 Fri Feb 4 07:41:13 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
337 * config/rs6000/tm-rs6000.h: Declare rs6000_struct_return_address
338 as CORE_ADDR to match definition in rs6000-tdep.c.
340 Fri Feb 4 01:14:20 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
342 * dwarfread.c (process_dies): Skip nested TAG_compile_unit DIEs.
343 * dwarfread.c (add_partial_symbol): Do not enter opaque aggregate
344 definitions into the psymtab.
346 Thu Feb 3 12:38:58 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
348 * m68k-stub.c: Treat mc68332 like mc68020 most places. Provide
349 a special exceptionSize for the 68332.
351 * remote-udi.c (udi_attach): If no arguments, print error.
353 Thu Feb 3 17:34:05 1994 Fred Fish (fnf@cygnus.com)
355 * Makefile.in (VERSION): Bump to 4.12.1
356 * NEWS, README: Update to match 4.12 release.
358 Thu Feb 3 12:38:58 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
360 * command.c (empty_sfunc): New function.
361 (add_set_cmd): Use it instead of not_just_help_class_command.
362 (not_just_help_class_command): Change calling convention back to
363 what it was before yesterday's change.
365 * stabsread.c (read_sun_builtin_type): Skip the semicolon at the end
366 of the type if present.
368 Wed Feb 2 11:16:45 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
370 * printcmd.c (decode_format): Don't blithely set the size for
371 an address to 'w'. Make it 'g' or 'h', depending on TARGET_PTR_BIT.
373 * defs.h: Just typedef CORE_ADDR to bfd_vma. Include bfd.h.
374 If BFD64, make a LONGEST a BFD_HOST_64_BIT.
375 * defs.h (longest_to_int): Don't depend on CC_HAS_LONG_LONG; instead
376 always just check against INT_MIN and INT_MAX (this also fixes things
377 if sizeof (long) > sizeof (int), e.g. Alpha).
378 * config/pa/tm-hppa.h, config/i386/sun386.h, config/rs6000/tm-rs6000.h:
379 Don't define LONGEST or BUILTIN_TYPE_LONGEST.
380 * gdbtypes.h: Remove BUILTIN_TYPE_LONGEST and
381 BUILTIN_TYPE_UNSIGNED_LONGEST.
382 * language.h, c-lang.c, ch-lang.c, m2-lang.c, language.c: Remove
383 longest_int and longest_unsigned_int.
384 * value.h (struct value): Just align to LONGEST, rather than worrying
385 about CC_HAS_LONG_LONG.
386 * valarith.c (value_binop): Figure out type ourself based on
387 sizeof (LONGEST) rather than relying on BUILTIN_TYPE_LONGEST. The
388 point is that we don't depend on CC_HAS_LONG_LONG anymore.
389 * valprint.c (val_print_type_code_int): Just call
390 extract_unsigned_integer directly, rather than going through
392 * printcmd.c (decode_format): Remove code which would sometimes
393 change 'g' size to 'w' for integers. print_scalar_formatted handles
394 printing huge integers well enough, thank you.
396 * command.c (add_set_cmd, not_just_help_class_command): Change
397 to make this the sfunc, not cfunc, since that is how we call it.
398 * command.h: Comment difference between sfunc and cfunc.
399 * demangle.c (set_demangling_command): Add third arg since that
401 (_initialize_demangler): Use sfunc, not cfunc, for
402 set_demangling_command, since that is how it is called.
403 Remove show_demangling_command; it has no effect.
405 * command.c (shell_escape): Report errors correctly (with error
406 message from strerror).
408 Wed Feb 2 14:35:41 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
410 * xcoffread.c (read_xcoff_symtab): Change CSECT_LEN to use
411 x_scnlen.l rather than x_scnlen to match corresponding change in
414 Wed Feb 2 11:16:45 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
416 * gdbtypes.h, ch-typeprint.c, ch-valprint.c:
417 Change comments regarding TYPE_CODE_BOOL.
418 * language.c (boolean_type): Always return 1 for TYPE_CODE_BOOL,
419 regardless of the language.
420 (value_true): Just call value_logical_not regardless of language.
421 * coffread.c (coff_read_enum_type), stabsread.c (read_enum_type):
422 Remove #if 0'd code which makes some enums TYPE_CODE_BOOL.
423 * language.h: Improve comment for la_builtin_type_vector.
424 * m2-lang.c (_initialize_m2_language): Don't add any fields to
425 builtin_type_m2_bool.
427 Tue Feb 1 17:13:32 1994 Kevin Buettner (kev@cujo.geg.mot.com)
429 * config/m88k/{tm-delta88.h,tm-delta88v4.h}, m88k-tdep.c:
430 Define IN_SIGTRAMP and backtrace correctly through signal handlers.
432 Tue Feb 1 22:13:25 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
434 * procfs.c (wait_fd): Handle EINTR error return from PIOCWSTOP ioctl
435 by restarting the ioctl.
437 Tue Feb 1 16:16:25 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
439 * target.h (target_wait): Add comment about calling
442 Tue Feb 1 12:21:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
444 * coffread.c (read_one_sym): bfd_coff_swap_aux_in now takes
445 additional arguments.
446 * xcoffread.c (read_xcoff_symtab, read_symbol_lineno): Likewise.
448 Mon Jan 31 16:10:41 1994 Stu Grossman (grossman at cygnus.com)
450 * sparc-stub.c: Remove unnecessary #include of memory.h.
452 Mon Jan 31 12:12:34 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
454 * mips-tdep.c: Remove code which sets saved_regs from
455 init_extra_frame_info and put it in new function mips_find_saved_regs.
456 (READ_FRAME_REG): Remove macro and replace uses with the expansion.
457 * mips-tdep.c, config/mips/tm-mips.h: When examining ->saved_regs,
458 check if it is NULL and call mips_find_saved_regs if so.
460 * remote-mips.c: Use unfiltered, not filtered, output most places.
462 * blockframe.c (get_prev_frame_info): Detect and stop an infinite
463 backtrace. Revise comments.
465 Mon Jan 31 09:40:33 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
467 * mdebugread.c (parse_procedure): Remove _sigtramp kludges for
468 alpha and irix. The _sigtramp case has to be handled properly
469 in the tdep files if we have no ecoff debugging info.
470 * alpha-tdep.c (alpha_frame_saved_pc, alpha_frame_chain),
471 mips-tdep.c (mips_frame_saved_pc): Handle signal handler frames
472 without PC_REGNUM kludge.
473 * mdebugread.c (fixup_sigtramp), mips-tdep.c (read_next_frame_reg):
474 Clean up handling of mips sigtramp frames, improve comments.
476 Sat Jan 29 23:25:57 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
478 * paread.c (read_unwind_info): Fix typo.
480 * paread.c (pa_symtab_read): Update the "check_strange_names"
481 filter to match GCC's current output. Filter out section symbols
482 (which the HP linker sometimes puts in the wrong place).
484 Sat Jan 29 07:44:59 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
486 * serial.h (SERIAL_SET_TTY_STATE): Comment return value.
488 * Makefile.in (TAGS): Just echo one line, rather than the whole thing.
490 * Makefile.in: Remove all references to sparcly-nat.c.
492 * Makefile.in (HFILES_NO_SRCDIR): Include dcache.h remote-utils.h
493 remote-sim.h directly, rather than via $(remote_utils_h). This avoids
494 duplicating serial.h and target.h.
496 * Makefile.in: Don't set M_INSTALL and M_UNINSTALL. These variables
497 are not used anywhere (a 5 Oct 1993 change removed the uses).
499 * config/m68k/monitor.mt (TDEPFILE): Add remote-es.o.
500 * config/m68k/es1800.mt: Add comment.
501 * remote-es.c: Extensive changes to update to current conventions.
503 * ser-unix.c (wait_for, hardwire_readchar) [HAVE_TERMIO, HAVE_TERMIOS]:
504 If the timeout is too big to fit in c_cc[VTIME], then do multiple reads
505 to achieve the desired timeout.
506 * serial.h (serial_t): Add field timeout_remaining.
508 Fri Jan 28 08:45:02 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
510 * c-exp.y (yylex): Reenable nested type code.
512 Fri Jan 28 15:40:33 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
514 * a29k-tdep.c (examine_tag): Add comment regarding argcount.
516 * remote-mips.c (mips_ops): Fix docstring.
518 * remote-bug.c (bug_ops): Remove spurious newline from docstring.
520 * config/m68k/tm-monitor.h: Changes to bring this into accordance
521 with the old tm-m68k-em.h:
522 (GDBINIT_FILENAME, DEFAULT_PROMPT): Remove.
523 (HAVE_68881): Don't undefine; HAVE_68881 is obsolete.
524 (REGISTER_NAMES): Don't muck with it; what tm-m68k.h has is fine.
525 Add FIXME regarding GET_LONGJMP_TARGET.
527 * remote-udi.c (udi_close, udi_detach, udi_kill): Add comments.
528 * infptrace.c (kill_inferior): Add comments.
529 * main.c (quit_command): Call target_close after we kill or
531 * remote-udi.c (udi_close): Don't error() if QUITTING.
533 Fri Jan 28 11:55:52 1994 Rob Savoye (rob@darkstar.cygnus.com)
535 * configure.in: Make m68k-coff and aout add monitor support in
536 addition to the standard serial support.
538 Fri Jan 28 08:45:02 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
540 * mdebugread.c (psymtab_to_symtab_1): Don't complain on stLabel with
543 Fri Jan 28 10:40:34 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
545 * config/pa/tm-hppa.h: Define macro SMASH_TEXT_ADDRESS.
546 * elfread.c (record_minimal_symbol_and_info),
547 dwarfread.c (process_dies), paread.c (pa_symtab_read): Use it.
549 Thu Jan 27 15:12:23 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
551 * i386-stub.c: Add ".text" right before "mem_fault:".
553 * main.c (baud_rate): Add FIXME comment about printing -1 value.
555 * remote-utils.c (usage): Fix message to be accurate and conform
556 more closely to normal conventions.
558 * remote-utils.c (gr_files_info): Have the exec_bfd test control
559 whether to show information about exec_bfd, and not control whether
560 to show information about device and speed.
562 * remote-utils.c (gr_open): If sr_get_device returns NULL, give
563 usage message, don't dump core.
565 * remote-bug.c (bug_write_memory): Use alloca, not GCC extension
566 for variable size array.
567 (bug_fetch_register, bug_store_register): Rename "value" to
568 "fpreg_buf" because some compilers don't like variables whose
569 names are the same as types.
570 (bug_store_register): Use a cast when converting char * to
573 * symmisc.c (maintenance_print_symbols): Don't refer to the name
574 of the command in error message (the text was referring to the old
575 name of the command).
577 * symmisc.c (dump_symtab): Fix args to fprintf_filtered.
579 * c-typeprint.c (c_type_print_base): Have SHOW == 0 mean to print
580 full details on structure elements without names. This partially
581 reverts the changes of 1 Jul 1993 and 31 Aug 1993; I think this aspect
582 of those changes was accidental.
584 * stack.c (parse_frame_specification): If SETUP_ARBITRARY_FRAME is
585 defined, make it an error to specify a single argument which is not
588 * Makefile.in (version.c), main.c (print_gdb_version): Use
589 host_alias and target_alias, not host_canonical and
590 target_canonical, to print configuration.
592 Wed Jan 26 10:57:21 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
594 * parse.c (write_exp_msymbol): Use new type msymbol_addr_type instead
595 of builtin_type_long. It is necessary to get a type which is
596 TARGET_PTR_BIT bits in size; builtin_type_long might not be big enough.
598 Fix many sins which will come up in 32 bit x 64 bit GDB, and
599 various miscellaneous things discovered in the process:
600 * printcmd.c, defs.h (print_address_numeric): New function.
601 * c-valprint.c (c_val_print), ch-valprint.c (chill_val_print)
602 breakpoint.c (describe_other_breakpoints, breakpoint_1, mention),
603 cp-valprint.c (cplus_print_value), infcmd.c (jump_command),
604 printcmd.c, stack.c, symfile.c, symmisc.c, valprint.c:
606 * utils.c, defs.h (gdb_print_address): New function.
607 * expprint (dump_expression), gdbtypes.h: Use it.
608 * breakpoint.c (describe_other_breakpoints),
609 symmisc.c (dump_symtab, print_symbol):
610 Use filtered not unfiltered I/O.
611 (remove_breakpoints): Remove BREAKPOINT_DEBUG code. Might as well
612 just run gdb under a debugger for this (and it had problems with
613 printing addresses, how to print b->shadow, etc.).
614 * buildsym.c (make_blockvector), core.c (memory_error),
615 exec.c (print_section_info), maint.c (print_section_table),
616 mdebugread.c (parse_procedure), solib.c, source.c, symfile.c,
617 symmisc.c, symtab.c, valops.c, valprint.c, xcoffexec.c:
618 Add comments saying code is broken. Marked with "FIXME-32x64".
619 * dbxread.c (process_one_symbol), partial-stab.h (default),
620 remote-vx.c (vx_run_files_info):
621 Don't cast int being passed to local_hex_string.
622 * symmisc.c (print_symbol): Don't cast long being passed to %lx.
623 * symtab.h (general_symbol_info): Add comment about SYMBOL_VALUE
625 * symmisc.c (print_symbol): Print "offset" in message for LOC_ARG
627 * printcmd.c (print_address): Remove #if 0 code with ADDR_BITS_REMOVE.
628 * source.c: Include <sys/types.h> regardless of USG.
630 Tue Jan 25 12:58:26 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
632 * valops.c (value_assign): Set `type' after coercing toval.
633 * c-valprint.c (c_val_print), ch-valprint.c (chill_val_print):
634 Use extract_unsigned_integer to get the address of a reference.
636 Tue Jan 25 11:31:53 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
638 * stabsread.c (STABS_CONTINUE, error_type), partial-stab.h:
639 AIX can use ? instead of \ for continuation. Deal with it.
641 * paread.c (read_unwind_info): Just assign to objfile->obj_private,
642 not OBJ_UNWIND_INFO. Assigning to a cast is a GCC-ism which
643 the HP compiler in ANSI mode doesn't like.
645 * main.c: When defaulting HAVE_SIGSETMASK based on USG, just do it
646 based on USG, rather than defining HAVE_SIGSETMASK to an
647 expression containing defined. Having a macro used in #if expand
648 to an expression containing "defined" is undefined according to
649 ANSI, and the HP compiler in ANSI mode doesn't do what we wanted
652 Mon Jan 24 20:51:29 1994 John Gilmore (gnu@cygnus.com)
654 * sparc-nat.c (fetch_inferior_registers, store_inferior_registers):
655 Clean up the changes of 11 Jan, as recommended by Peter Schauer.
657 Fri Jan 21 19:10:44 1994 Per Bothner (bothner@kalessin.cygnus.com)
659 * ch-exp.y (match_string_literal): Allow a zero-length string.
660 * ch-lang.c (chill_printstr): Don't print zero-length string funny.
662 Sat Jan 22 17:08:48 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
664 * i386aix-nat.c (i386_float_info): Reverse order of registers before
665 passing them to print_387_status.
666 (print_387_status): Don't subtract top from 7 before using it.
667 * i387-tdep.c: Remove comment about AIX wanting "top" subtracted
668 from 7; the above explains it.
670 Sat Jan 22 20:25:11 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
672 * mips-tdep.c (init_extra_frame_info): Use frame relative stack
673 pointer value when fixing up the frame at the start of a function.
675 Sat Jan 22 12:29:13 1994 Stu Grossman (grossman at cygnus.com)
677 * lynx-nat.c (fetch_core_registers): Load the I & L regs for the
678 Sparc from the stack.
680 Sat Jan 22 08:30:42 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
682 * remote-mips.c (mips_initialize): Clear mips_initializing via
683 cleanup chain, not directly.
685 * ser-unix.c (wait_for) [HAVE_TERMIO, HAVE_TERMIOS]: Make a timeout
686 of -1 mean forever, like in the HAVE_SGTTY case. Warn if we are
687 munging the timeout due to the limited range of c_cc[VTIME].
689 * fork-child.c, inferior.h (fork_inferior): New argument shell_file.
690 * procfs.c (procfs_create_inferior), inftarg.c (child_create_inferior),
691 m3-nat.c (m3_create_inferior): Pass it.
692 * procfs.c: Remove ptrace function. It was declared in a way which
693 conflicted with the prototype in unistd.h on Solaris.
695 Sat Jan 22 01:37:40 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
697 * sparc-tdep.c (frame_saved_pc): Get the pc from the saved pc
698 in the sigcontext if it is a signal trampoline frame.
699 * config/sparc/tm-sun4sol2.h (IN_SIGTRAMP, SIGCONTEXT_PC_OFFSET):
702 Sat Jan 22 00:34:47 1994 Stu Grossman (grossman at cygnus.com)
704 * sparc-tdep.c, lynx-nat.c, config/sparc/tm-sparc.h,
705 config/sparc/tm-sparclynx.h: Move defs of FRAME_SAVED_I0/L0 to
706 tm-sparc.h so they can be overridden if necessary.
708 Fri Jan 21 17:49:28 1994 Stu Grossman (grossman at cygnus.com)
710 * lynx-nat.c: Add Sparc support.
711 * sparcly-nat.c: Remove. It's useless.
712 * config/sparc/nm-sparclynx.h: Rewrite.
713 * config/sparc/sparclynx.mh (NATDEPFILES): Replace sparcly-nat.o
715 * config/sparc/tm-sparclynx.h: Rewrite.
717 Fri Jan 21 19:08:48 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
719 * rs6000-pinsn.c: Use the new disassembler in the opcodes
720 directory. Old code was discarded, since the new opcode table has
723 Fri Jan 21 14:28:30 1994 Fred Fish (fnf@cygnus.com)
725 * Makefile.in (realclean): Remove info files per make-stds.texi.
727 Fri Jan 21 12:47:53 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
729 * dbxread.c (end_psymtab): Only patch psymtab textlow and texthigh
730 if N_SO_ADDRESS_MAYBE_MISSING is defined.
731 * config/sparc/tm-sun4sol2.h: Define it.
733 Thu Jan 20 15:04:24 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
735 * printcmd.c (print_address_symbolic): Unconditionally use msymbol
736 if we did not find a symbol.
738 Fri Jan 21 08:20:18 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
740 * infptrace.c (child_xfer_memory): Only use if CHILD_XFER_MEMORY
743 * hppab-nat.c (call_ptrace): Delete redundant function.
744 (kill_inferior, attach, detach, child_resume): Likewise.
745 (child_xfer_memory): Likewise.
747 * hppah-nat.c (call_ptrace): Delete redundant function.
748 (kill_inferior, attach, detach, child_resume): Likewise.
750 * config/pa/hppabsd.mh (NATDEPFILES): Add infptrace.o.
752 * config/pa/hppahpux.mh (NATDEPFILES): Add infptrace.o.
754 * config/pa/nm-hppab.h (FETCH_INFERIOR_REGISTERS): Define.
756 * config/pa/nm-hppah.h (FETCH_INFERIOR_REGISTERS): define.
757 (CHILD_XFER_MEMORY): Define.
758 (PT_*): Define so that generic infptrace.c code can be used.
760 Fri Jan 21 09:23:33 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
762 * xcoffread.c (xcoff_symfile_read): Make second parameter a
763 struct section_offsets *, not a (nonexistent) struct section_offset *.
765 * xcoffread.c (read_xcoff_symtab): Make main_aux just a union
766 internal_xcoff_symtab, not an array of one of them. Change lots of
767 "main_aux" to "&main_aux" and so on.
769 * coffread.c, xcoffread.c: Include <coff/internal.h>
772 Thu Jan 20 17:30:55 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
774 * coffread.c (coff_getfilename): Make it not static.
776 * xcoffread.c (read_xcoff_symtab): complain() not abort().
778 * xcoffread.c (struct coff_symbol): Rename c_nsyms to c_naux (removes
779 a completely gratuitous difference between xcoffread.c and coffread.c).
781 Wed Jan 19 15:09:44 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
783 * infrun.c (wait_for_inferior): Don't set frame for
784 step_resume_breakpoint for IN_SIGTRAMP cases.
786 * infrun.c (wait_for_inferior), breakpoint.h (struct bpstat_what),
787 breakpoint.c (bpstat_what): Move step_resume from its own field of
788 the struct bpstat_what into the main_action. Make it override
789 other breakpoints. This is a conservative change in the sense
790 that before the step resume breakpoint was a breakpoint.c
791 breakpoint, hitting the step resume breakpoint overrode even
792 calling bpstat_stop_status.
794 Wed Jan 19 12:40:25 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
796 * infrun.c (normal_stop): Set stop_pc after popping the dummy frame
797 in case execution was stopped in the called function.
798 * stack.c (print_frame_info, frame_info): If backtracing through
799 a call dummy, handle the starting source line number on a line
800 boundary like backtracing through sigtramp.
801 * sparc-tdep.c (sparc_frame_find_saved_regs): Get frame address
802 for call dummy frame right. Remove old test for dummy frame,
803 it has been unused at least since gdb-3.5.
804 * sparc-tdep.c (sparc_push_dummy_frame): Set return address register
807 Tue Jan 18 16:16:35 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
809 * infcmd.c (signal_command): Accept 0 as legitimate signal number.
811 Tue Jan 18 14:09:25 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
813 * infrun.c (signals_info), target.c (target_signal_from_name):
814 Use ugly casts to avoid enumvar < enumvar or enumvar++.
816 Mon Jan 17 22:00:15 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
818 * ser-unix.c (hardwire_noflush_set_tty_state): Don't muck with ICANON.
819 * inflow.c (terminal_ours_1): When discussing how to deal with the
820 tty state, make note of query() as well as readline.
822 * infrun.c (_initialize_infrun): Add TARGET_SIGNAL_POLL to list of
823 signals for which stop and print are cleared by default.
825 Mon Jan 17 20:00:51 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
827 * config/pa/tm-hppa.h (unwind_table_entry): Use one of the
828 reserved fields to hold a stub unwind entry type. Fix typo.
829 (stub_unwind_entry): New structure for raw stub unwind entries.
830 (stub_unwind_types): The types of stubs we may encounter.
831 (UNWIND_ENTRY_SIZE, STUB_UNWIND_ENTRY_SIZE): New defines.
832 * hppa-tdep.c (rp_saved): Use additional information provided
833 by linker stub unwind descriptors.
834 (frameless_function_invocation): Likewise.
835 (frame_chain_valid): Likewise.
836 * paread.c (compare_unwind_entries): New function for sorting
837 unwind table entries.
838 (read_unwind_info): Rewrite to remove dependency on host endianness.
839 Read in data from the $UNWIND_END$ subspace which contains linker
840 stub unwind descriptors. Merge that data into the basic unwind
843 * hppab-nat.c (_initialize_kernel_u_addr): Delete unwanted functions.
845 Mon Jan 17 22:00:15 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
847 * xcoffread.c (read_xcoff_symtab, case C_FILE): Accept the name
848 from either the symbol name or the auxent.
849 * coffread.c, symfile.h (coff_getfilename): Renamed from getfilename,
852 Mon Jan 17 13:35:01 1994 Fred Fish (fnf@cygnus.com)
854 * Makefile.in (ALLPARAM): Change irix5.h to nm-irix5.h.
856 Mon Jan 17 12:35:42 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
858 * README: Update notes for alpha port.
860 Mon Jan 17 11:15:57 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
862 * i960-tdep.c (i960_fault_to_signal): Return TARGET_SIGNAL_ILL
863 for operation fault, constraint fault, and type fault.
865 Sun Jan 16 12:46:01 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
867 * Makefile.in (init.c): Add comment explaining formatting conventions.
869 * c-exp.y (parse_number): Assign to temporary between the right
870 shifts, to work around a bug in the SCO compiler.
872 * Makefile.in (ALLCONFIG, ALLPARAM, ALLDEPFILES, HFILES_NO_SRCDIR):
873 Add various files which were added to GDB recently.
875 * xcoffread.c (process_xcoff_symbol): Only change 'V' to 'S' if not
878 * Makefile.in: Add mostlyclean target.
880 Sat Jan 15 10:20:13 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
884 Sat Jan 15 18:27:34 1994 Per Bothner (bothner@kalessin.cygnus.com)
886 * main.c (show_commands): Make return type of extern
887 history_get be HIST_ENTRY, rather than struct _hist_entry.
888 (The latter loses with the upcoming merged readline.)
890 Sat Jan 15 10:20:13 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
892 * minsyms.c (prim_record_minimal_symbol_and_info): Make tempstring
893 const char *, not char *.
895 * symtab.h (struct symbol): Make section short, not unsigned short.
897 * symtab.c (lookup_symbol): Add comment about QUIT here.
899 * utils.c (fputs_unfiltered): Call fputs, not fputs_maybe_filtered.
901 * c-exp.y (parse_number): Check for overflow regardless of range
902 checking. Fix overflow check to use unsigned LONGEST, not
905 * c-exp.y (parse_number): Make it so that integer constants are
906 builtin_type_long_long if builtin_type_long isn't big enough or if
907 an "LL" suffix is used. Properly handle "UL" or "LU" suffixes.
909 * c-typeprint.c (c_type_print_varspec_suffix, case TYPE_CODE_FUNC):
910 Print our "()" first, then recurse for the target type.
912 Fri Jan 14 21:55:39 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
914 * remote-udi.c (udi_create_inferior): Quote empty execfile argument.
916 * gdbserver/low-lynx.c: Include <sys/wait.h> not "/usr/include/wait.h".
918 Fri Jan 14 14:17:06 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
920 * utils.c (request_quit): Re-establish signal handler regardless
923 * config/mips/xm-irix4.h: Define HAVE_TERMIOS.
925 Fri Jan 14 21:55:39 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
927 * i960-tdep.c: Include target.h.
929 Fri Jan 14 17:12:28 1994 Stan Shebs (shebs@andros.cygnus.com)
931 * lynx-nat.c (sys/wait.h): Don't use absolute pathname.
933 Fri Jan 14 11:06:10 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
935 * lynx-nat.c (child_wait): Fix thinkos in struct target_waitstatus
936 changes (status -> ourstatus; declare status, etc.).
937 * config/nm-lynx.h: Fix child_wait prototype and include target.h.
939 Fri Jan 14 14:17:06 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
941 * Makefile.in (ALLPARAM): Add config/nm-lynx.h.
943 Fri Jan 14 11:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
945 * remote-mips.c (mips_request, mips_wait): Correct prototypes.
947 Fri Jan 14 11:37:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
949 * config/i386/xm-linux.h: Define HAVE_TERMIOS.
951 Fri Jan 14 01:04:36 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
953 * config/alpha/tm-alpha.h (CALL_DUMMY): Improve comment.
955 Thu Jan 13 10:32:38 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
957 * remote-vx.c (vx_wait): Only call i960_fault_to_signal if I80960
958 is defined. Otherwise just report TARGET_SIGNAL_UNKNOWN.
960 * mips-tdep.c (mips_push_arguments): Byteswap struct_addr before
963 Add search to target vector (#if 0'd until after 4.12):
964 * target.h (to_search, target_search): Add.
965 * gdbcore.h, core.c (generic_search): Add.
966 * remote.c (remote_search): Add.
967 * a29k-tdep.c (init_frame_info): Use target_search to find traceback
970 * printcmd.c (print_address_symbolic): If set print fast-symbolic-addr
971 is on, call find_pc_function rather than relying just on the minimal
972 symbols (probably only matters for symbol readers which don't put
973 statics in the minimal symbols, but changing this strikes me as
974 not conservative enough).
975 Initialize name_location in all cases.
976 If no symbol and no msymbol, don't print anything symbolic.
978 * a29k-tdep.c (push_dummy_frame): Add comment about saving lr0.
980 Wed Jan 12 20:53:16 1994 John Gilmore (gnu@cygnus.com)
982 * printcmd.c (print_address_symbolic): Make it search the
983 symtabs for variables as well as functions. Add `set print
984 fast-symbolic-addr' and default it to fast (the old way).
985 Print line numbers for data items as well as functions.
987 * symtab.c (find_addr_symbol): Return the symtab and the symbol
988 address, if a symbol is found (take two more args pointing to
989 where to store these results).
991 * symtab.h (find_addr_symbol): Add prototype.
993 Wed Jan 12 19:32:11 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
995 * objfiles.h: Fix comments to reflect the fact that the phrase
996 "top of stack" always refers to where the pushing and popping takes
997 place, regardless of whether it is at the highest or lowest address.
999 Wed Jan 12 13:23:37 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1001 * mdebugread.c (parse_symbol): Do not set TYPE_TAG_NAME for
1002 compiler generated tag names.
1003 * mdebugread.c (parse_type): Handle cross references to qualified
1005 * valops.c (value_struct_elt): Improve error message if the
1006 address of a method is requested from an object instance.
1007 * valops.c (search_struct_method): Make name_matched non-static
1008 to get it initialized correctly.
1009 * config/i386/nm-i386sco.h (CANNOT_STORE_REGISTER): Define to
1010 exclude segment register which are not writable on newer SCO versions.
1012 Wed Jan 12 14:44:45 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
1014 * go32-xdep.c: Remove unused function uerror.
1015 (sigsetmask): Declare return type. Declare argument (to match the
1016 way it is called). Explicitly return 0.
1018 Wed Jan 12 01:44:25 1994 John Gilmore (gnu@cygnus.com)
1020 * symtab.h (struct symbol, general_symbol_info, minimal_symbol,
1021 partial_symbol): Shrink the storage sizes of symbols, by making
1022 enums into 1-byte bitfields when compiled __GNUC__, moving all the
1023 enums and small ints to the end of each struct to improve
1024 alignment, and switching the section number from int to unsigned
1027 Wed Jan 12 00:16:26 1994 John Gilmore (gnu@cygnus.com)
1029 * symtab.c (find_addr_symbol): New routine that will find the nearest
1030 symbol associated with an address. It does so by exhaustive
1031 search of the symtabs, so it's slow but complete.
1033 Tue Jan 11 23:57:30 1994 John Gilmore (gnu@cygnus.com)
1035 * coffread.c (read_coff_symtab): Set PC bounds of _globals_ symtab
1036 to [0,0] rather than [0, end of first source file]. This avoids
1037 problems with other parts of GDB looking for linetables in the
1038 _globals_ symtab. Eliminate variables num_object_files and
1039 first_object_file_end.
1041 Tue Jan 11 00:53:46 1994 John Gilmore (gnu@cygnus.com)
1043 * a29k-tdep.c (init_frame_info): Cast null arg to examine_tag.
1044 (pop_frame): Restore PC2 and LR0 from dummy frames.
1045 (push_dummy_frame): Save PC2 and LR0 into dummy frames.
1046 (setup_arbitrary_frame): Handle 3 args and set up real frames.
1047 * config/a29k/tm-a29k.h (FRAME_NUM_ARGS): Update comments.
1048 (DUMMY_FRAME_RSIZE): Add 2 longwords for PC2 and LR0.
1049 (SETUP_ARBITRARY_FRAME): Define.
1051 Tue Jan 11 06:59:10 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
1053 * infrun.c, config/mips/tm-irix5.h: Remove #if 0'd AT_FUNCTION_START.
1055 Tue Jan 11 14:27:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1057 * remote-udi.c (udi_resume): Correct prototype.
1059 Tue Jan 11 11:10:30 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
1061 * config/pa/tm-hppa.h (FRAME_FIND_SAVED_REGS): Call
1062 hppa_frame_find_saved_regs.
1063 * hppa-tdep.c (dig_fp_from_stack): Delete function.
1064 (prologue_inst_adjust_sp): New function.
1065 (is_branch, inst_saves_gr, inst_saves_fr): New functions.
1066 (skip_prologue): Completely rewrite to use unwind information.
1067 (hppa_frame_find_saved_regs): Likewise.
1069 Tue Jan 11 06:59:10 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
1071 * remote-mips.c (mips_wait): Use new function mips_signal_from_protocol
1072 to convert a signal number with appropriate bounds checking.
1074 * remote-mips.c (mips_wait): Fix typos (0x177 -> 0177, 0x377 -> 0377).
1076 Tue Jan 11 00:53:46 1994 John Gilmore (gnu@cygnus.com)
1078 * stack.c (frame_info): If FRAME_FIND_SAVED_REGS isn't defined,
1079 print a newline to end the display anyway.
1081 * sparc-tdep.c (sparc_pop_frame): Pop the fsr and csr (float and
1082 coprocessor status regs) when popping a frame. This fixes
1083 float exceptions that occur after calling inferior functions.
1085 * sparc-nat.c (fetch_inferior_registers, store_inferior_registers):
1086 Read and write the fsr (float status register) to/from the child
1087 process along with the float regs. Remove Peter Schauer's change
1088 of May 24 '93, which has higher overhead and doesn't solve the
1089 real problem (which was that FSR wasn't being set).
1091 Mon Jan 10 23:16:42 1994 John Gilmore (gnu@cygnus.com)
1093 * a29k-tdep.c (examine_prologue): Don't worry if the ASGEQ
1094 stack overflow check isn't right after the register stack
1095 adjustment instruction. Metaware R2.3u compiler moves other
1096 things in front of it. This fix isn't perfect but is what's
1099 Mon Jan 10 20:08:23 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
1101 * c-valprint.c (c_val_print): Treat TYPE_CODE_RANGE like TYPE_CODE_INT.
1103 * config/alpha/alpha-netware.mt: Rename to alpha-nw.mt for 14
1104 character filenames.
1105 * configure.in: Change accordingly.
1107 Mon Jan 10 15:48:36 1994 Tom Lord (lord@rtl.cygnus.com)
1109 * m68k-stub.c, sparc-stub.c: removed spurious introduction of
1110 _filtered io routines from these two files.
1112 Fri Jan 7 12:42:45 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1114 * config/i386/tm-i386v.h, config/m68k/tm-m68k.h, config/mips/tm-mips.h,
1115 config/vax/tm-vax.h (CALL_DUMMY_BREAKPOINT_OFFSET): Define.
1116 * mdebugread.c (parse_symbol): Handle enum sh.type produced by
1118 * mdebugread.c (add_line): Handle zero linenos produced by DEC c89.
1120 Fri Jan 7 12:55:25 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
1122 * utils.c (print_sys_errmsg): Call gdb_flush (gdb_stdout) before
1123 printing to gdb_stderr.
1125 * remote-udi.c (udi_kill): Don't close the connection, just set
1126 inferior_pid to zero.
1127 (udi_mourn): Call remove_breakpoints.
1129 * remote-udi.c: Remove obsolete need_artificial_traps comment.
1131 * i386b-nat.c (sregmap): If sEAX, etc., not defined, use tEAX, etc.
1133 Thu Jan 6 07:17:53 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
1135 * symtab.c (lookup_symbol): Don't try adding .c to the name.
1137 * remote-bug.c: At the start of each section, reset srec_frame
1140 * target.h: Add TARGET_WAITKIND_LOADED and TARGET_WAITKIND_SPURIOUS.
1141 * target.c (store_waitstatus): Add CHILD_SPECIAL_WAITSTATUS hook.
1142 * infrun.c (wait_for_inferior): Replace SIGTRAP_STOP_AFTER_LOAD with
1143 code which looks for those two waitkinds. Use switch statement.
1144 * config/rs6000/tm-rs6000.h: Replace SIGTRAP_STOP_AFTER_LOAD with
1145 CHILD_SPECIAL_WAITSTATUS.
1147 * procfs.c (procfs_wait): Fix argument name to match 4 Jan changes.
1148 * Move target_signal_from_host, target_signal_to_host, and
1149 store_waitstatus from inftarg.c to target.c. procfs needs them.
1150 * target.c: Include "wait.h" and <signal.h>.
1151 * target.h, infrun.c (proceed), proceed callers: Pass new code
1152 TARGET_SIGNAL_DEFAULT instead of -1. This avoids problems with
1153 enums being treated as unsigned and is cleaner.
1154 * infrun.c (signals_info): Don't print TARGET_SIGNAL_DEFAULT or
1156 * infcmd.c (signal_command), infrun.c (signals_info):
1157 Don't allow user to specify numeric equivalent of
1158 TARGET_SIGNAL_DEFAULT.
1160 Tue Jan 4 15:34:36 1994 Stu Grossman (grossman@cygnus.com)
1162 * config/alpha/alpha-netware.mt: New target support for Alpha
1164 * configure.in: Add alpha-*-netware* target.
1166 Tue Jan 4 14:51:35 1994 Stan Shebs (shebs@andros.cygnus.com)
1168 * remote-mips.c (mips_wait): Fix ref to TARGET_WAITKIND_STOPPED.
1170 Tue Jan 4 09:47:14 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
1172 * target.h: Add enum target_waitkind, enum target_signal, and
1173 struct target_waitstatus. Change status argument to target_wait to
1174 be struct target_waitstatus * instead of int *.
1175 * target.h, infrun.c, all targets: Change type of signal arguments
1176 to resume(), proceed(), and target_resume() from int to enum
1178 * All targets (*_wait, *_resume): Change accordingly.
1179 * infcmd.c (program_info, signal_command), throughout infrun.c,
1180 * fork-child.c, solib.c, hppa-tdep.c, osfsolib.c: Use this stuff.
1181 * convex-xdep.c, convex-tdep.c: Add FIXME's (getting the Convex
1182 signal code stuff right with the new signals would be non-trivial).
1183 * inferior.h (stop_signal): Make it enum target_signal not int.
1184 * target.c, target.h (target_signal_to_string, target_signal_to_name,
1185 target_signal_from_name): New functions.
1186 * inftarg.c, target.h (target_signal_to_host, target_signal_from_host,
1187 store_waitstatus): New functions.
1188 * procfs.c (procfs_notice_signals): Use them.
1189 * i960-tdep.c (i960_fault_to_signal): New function, to replace
1191 * config/i960/tm-i960.h: Don't define PRINT_RANDOM_SIGNAL.
1193 * objfiles.c (build_objfile_section_table): Don't abort() if
1194 objfile->sections is already set.
1196 * objfiles.c (add_to_objfile_sections): Check SEC_ALLOC not SEC_LOAD
1197 to match recent change to exec.c.
1201 * main.c (print_gdb_version): Change year to 1994.
1203 * ChangeLog, ChangeLog-93: Split ChangeLog at 1994.
1204 * Makefile.in (NONSRC): Add ChangeLog-93.
1206 Mon Jan 3 11:57:29 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
1208 * stabsread.c (read_type): Allow defining several type numbers
1209 at once (e.g. "(1,2)=(3,4)="...).
1211 * stabsread.c (read_enum_type): Use TARGET_INT_BIT not sizeof (int).
1213 * breakpoint.c (frame_in_dummy): Check PC as well as frame.
1215 Mon Jan 3 02:47:03 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1217 * mdebugread.c (psymtab_to_symtab_1): Only pass N_STAB symbols
1218 to process_one_symbol.
1219 * symtab.c (find_pc_psymbol): Search global_psymbols as well to
1220 avoid caching a bad endaddr in find_pc_partial_function.
1222 Sun Jan 2 21:41:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
1224 * config/m68k/tm-sun3.h: Don't define BELIEVE_PCC_PROMOTION.
1226 Sat Jan 1 04:35:23 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1228 * infrun.c (wait_for_inferior): Do not step or step resume past
1229 the end of a one-line function we just stepped into.
1231 For older changes see ChangeLog-93
1237 version-control: never