1 2009-07-05 Pedro Alves <pedro@codesourcery.com>
3 * coff-pe-read.c (read_pe_exported_syms): Recognize
4 "pe-arm-wince-little" and "pei-arm-wince-little" bfd targets as PE
7 2009-07-05 Pedro Alves <pedro@codesourcery.com>
9 * arm-wince-tdep.c (arm_wince_skip_main_prologue): New.
10 (arm_wince_init_abi): Register it as gdbarch_skip_main_prologue
13 2009-06-29 Tristan Gingold <gingold@adacore.com>
15 * i386-darwin-tdep.c (amd64_darwin_thread_state_reg_offset)
16 (amd64_darwin_thread_state_num_regs)
17 (amd64_darwin_sigcontext_addr, x86_darwin_init_abi_64): Moved to
19 (_initialize_i386_darwin_tdep): Remove 64 bits parts.
20 (darwin_dwarf_signal_frame_p): Make public.
21 * amd64-darwin-tdep.c: New file with most chunks from
23 * i386-darwin-tdep.h: Add a prototype for darwin_dwarf_signal_frame_p.
24 (amd64_darwin_thread_state_reg_offset)
25 (amd64_darwin_thread_state_num_regs): Moved to amd64-darwin-tdep.h
26 * amd64-darwin-tdep.h: New file.
27 * i386-darwin-nat.c: Only includes amd64-nat.h and amd64-darwin-tdep.h
29 (i386_darwin_fetch_inferior_registers): Add #ifdef BFD64/#endif around
31 (i386_darwin_store_inferior_registers): Ditto.
32 (darwin_set_sstep): Ditto.
33 (darwin_complete_target): Ditto.
34 (amd64_darwin_sstep_at_sigreturn): Ditto.
35 * configure.tgt: Create a separate entry for x86_64-*-darwin.
36 Add 64 bits support for i386-*-darwin if --enable-64-bit-bfd.
37 * Makefile.in (ALLDEPFILES): Add amd64-darwin-tdep.c, darwin-nat.c,
38 i386-darwin-tdep.c i386-darwin-nat.c
39 (ALL_64_TARGET_OBS): Add amd64-darwin-tdep.o
41 2009-07-02 Pedro Alves <pedro@codesourcery.com>
43 * linux-fork.c (forks_exist_p): Drop unnecessary extern.
44 (add_fork, linux_fork_killall, linux_fork_mourn_inferior)
45 (linux_fork_detach): Ditto.
46 (delete_fork_command): Rename to ...
47 (delete_checkpoint_command): ... this.
48 (detach_fork_command): Rename to ...
49 (detach_checkpoint_command): ... this.
50 (info_forks_command): Rename to ...
51 (info_checkpoints_command): ... this.
52 (_initialize_linux_fork): Remove stale comments. Adjust.
54 2009-07-02 Pedro Alves <pedro@codesourcery.com>
56 * linux-nat.c (linux_child_follow_fork): If we're staying attached
57 to the child process, enable event reporting on it. Don't handle
58 checkpoints here. Instead, add the child fork to the lwp thread
59 and inferior lists without clobbering the previous inferior. Let
60 the thread_db layer learn about a new child process, even if
62 (linux_nat_switch_fork): Delete lwps of the current inferior only,
63 instead of clearing the whole list. Use thread_change_ptid to
64 give the core the illusion the new checkpoint is still the same
65 inferior. Clear the register cache.
66 (linux_handle_extended_wait): Handle checkpoints here.
67 (linux_multi_process): Turn on.
68 * linux-fork.c (struct fork_info) <pc>: Remove field.
69 (init_fork_list): Do not delete the checkpoint from the inferior
70 list (it is not there).
71 (fork_load_infrun_state): Don't switch inferior_ptid here. Pass
72 the new checkpoint's ptid to linux_nat_switch_fork.
73 (fork_save_infrun_state): Make static. Don't stop the pc field of
75 (linux_fork_mourn_inferior): Don't delete the checkpoint from the
76 inferior list, it's not there.
77 (linux_fork_detach): Ditto.
78 (delete_fork_command): Replace mention of fork/checkpoint by
80 (detach_fork_command): Likewise. Don't delete the checkpoint from
82 (info_forks_command): Adjust.
83 (restore_detach_fork): Delete.
84 (checkpointing_pid): New.
85 (linux_fork_checkpointing_p): New.
86 (save_detach_fork): Delete.
87 (checkpoint_command): Delete temp_detach_fork. Don't remove
88 breakpoints, that's a nop. Store the pid of the process we're
89 checkpointing, and use make_cleanup_restore_integer to restore it.
90 Don't reinsert breakpoints here.
91 (process_command, fork_command): Delete.
92 (restart_command): Update comments to only mention checkpoints,
94 (_initialize_linux_fork): Delete "fork", "process", "info forks"
96 * linux-fork.h (fork_save_infrun_state, fork_list): Delete
98 (linux_fork_checkpointing_p): Declare.
99 * cli/cli-cmds.c (killlist): New.
100 * cli/cli-cmds.h (killlist): Declare.
101 * gdbcmd.h (killlist): Declare.
102 * inferior.c: Include "gdbthread.h".
103 (detach_inferior_command, kill_inferior_command)
104 (inferior_command): New.
105 (info_inferiors_command): Allow specifying a specific inferior id.
106 (_initialize_inferiors): Register "inferior", "kill inferior" and
107 "detach inferior" commands.
108 * infcmd.c (_initialize_infcmd): Make "kill" a prefix command.
109 * gdbthread.h (any_thread_of_process): Declare.
110 * thread.c (any_thread_of_process): New.
112 * NEWS: Mention multi-inferior debugging. Mention 'info
113 inferiors', 'inferior', 'detach inferior' and 'kill inferior' as
115 (Removed commands): New section, mentioning that 'info forks',
116 'fork', 'process', 'delete fork' and 'detach fork' are now gone.
118 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
120 * gdbarch.sh (current_gdbarch): Remove global variable.
121 (find_arch_by_info): Remove, inline into ...
122 (gdbarch_find_by_info): ... this. Remove current_gdbarch swapping.
123 (deprecated_current_gdbarch_select_hack): Rename to ...
124 (deprecated_target_gdbarch_select_hack): ... this. Do not set
125 or access current_gdbarch.
126 * gdbarch.c, gdbarch.h: Regenerate.
128 * arch-utils.c (gdbarch_update_p): Update call.
129 (set_gdbarch_from_file): Likewise.
131 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
133 * defs.h (extract_signed_integer, extract_unsigned_integer,
134 extract_long_unsigned_integer, store_signed_integer,
135 store_unsigned_integer): Add BYTE_ORDER parameter.
136 * findvar.c (extract_signed_integer, extract_unsigned_integer,
137 extract_long_unsigned_integer, store_signed_integer,
138 store_unsigned_integer): Add BYTE_ORDER parameter. Use it
139 instead of current_gdbarch.
141 * gdbcore.h (read_memory_integer, safe_read_memory_integer,
142 read_memory_unsigned_integer, write_memory_signed_integer,
143 write_memory_unsigned_integer): Add BYTE_ORDER parameter.
144 * corefile.c (struct captured_read_memory_integer_arguments): Add
146 (safe_read_memory_integer): Add BYTE_ORDER parameter. Store it into
147 struct captured_read_memory_integer_arguments.
148 (do_captured_read_memory_integer): Pass it to read_memory_integer.
149 (read_memory_integer): Add BYTE_ORDER parameter. Pass it to
150 extract_signed_integer.
151 (read_memory_unsigned_integer): Add BYTE_ORDER parameter. Pass it to
152 extract_unsigned_integer.
153 (write_memory_signed_integer): Add BYTE_ORDER parameter. Pass it
154 to store_signed_integer.
155 (write_memory_unsigned_integer): Add BYTE_ORDER parameter. Pass it
156 to store_unsigned_integer.
158 * target.h (get_target_memory_unsigned): Add BYTE_ORDER parameter.
159 * target.c (get_target_memory_unsigned): Add BYTE_ORDER parameter.
160 Pass it to extract_unsigned_integer.
163 Update calls to extract_signed_integer, extract_unsigned_integer,
164 extract_long_unsigned_integer, store_signed_integer,
165 store_unsigned_integer, read_memory_integer,
166 read_memory_unsigned_integer, safe_read_memory_integer,
167 write_memory_signed_integer, write_memory_unsigned_integer, and
168 get_target_memory_unsigned to pass byte order:
169 * ada-lang.c (ada_value_binop): Update.
170 * ada-valprint.c (char_at): Update.
171 * alpha-osf1-tdep.c (alpha_osf1_sigcontext_addr): Update.
172 * alpha-tdep.c (alpha_lds, alpha_sts, alpha_push_dummy_call,
173 alpha_extract_return_value, alpha_read_insn,
174 alpha_get_longjmp_target): Update.
175 * amd64-linux-tdep.c (amd64_linux_sigcontext_addr): Update.
176 * amd64obsd-tdep.c (amd64obsd_supply_uthread,
177 amd64obsd_collect_uthread, amd64obsd_trapframe_cache): Update.
178 * amd64-tdep.c (amd64_push_dummy_call, amd64_analyze_prologue,
179 amd64_frame_cache, amd64_sigtramp_frame_cache, fixup_riprel,
180 amd64_displaced_step_fixup): Update.
181 * arm-linux-tdep.c (arm_linux_sigreturn_init,
182 arm_linux_rt_sigreturn_init, arm_linux_supply_gregset): Update.
183 * arm-tdep.c (thumb_analyze_prologue, arm_skip_prologue,
184 arm_scan_prologue, arm_push_dummy_call, thumb_get_next_pc,
185 arm_get_next_pc, arm_extract_return_value, arm_store_return_value,
186 arm_return_value): Update.
187 * arm-wince-tdep.c (arm_pe_skip_trampoline_code): Update.
188 * auxv.c (default_auxv_parse): Update.
189 * avr-tdep.c (avr_address_to_pointer, avr_pointer_to_address,
190 avr_scan_prologue, avr_extract_return_value,
191 avr_frame_prev_register, avr_push_dummy_call): Update.
192 * bsd-uthread.c (bsd_uthread_check_magic, bsd_uthread_lookup_offset,
193 bsd_uthread_wait, bsd_uthread_thread_alive,
194 bsd_uthread_extra_thread_info): Update.
195 * c-lang.c (c_printstr, print_wchar): Update.
196 * cp-valprint.c (cp_print_class_member): Update.
197 * cris-tdep.c (cris_sigcontext_addr, cris_sigtramp_frame_unwind_cache,
198 cris_push_dummy_call, cris_scan_prologue, cris_store_return_value,
199 cris_extract_return_value, find_step_target, dip_prefix,
200 sixteen_bit_offset_branch_op, none_reg_mode_jump_op,
201 move_mem_to_reg_movem_op, get_data_from_address): Update.
202 * dwarf2expr.c (dwarf2_read_address, execute_stack_op): Update.
203 * dwarf2-frame.c (execute_cfa_program): Update.
204 * dwarf2loc.c (find_location_expression): Update.
205 * dwarf2read.c (dwarf2_const_value): Update.
206 * expprint.c (print_subexp_standard): Update.
207 * findvar.c (unsigned_pointer_to_address, signed_pointer_to_address,
208 unsigned_address_to_pointer, address_to_signed_pointer,
209 read_var_value): Update.
210 * frame.c (frame_unwind_register_signed,
211 frame_unwind_register_unsigned, get_frame_memory_signed,
212 get_frame_memory_unsigned): Update.
213 * frame-unwind.c (frame_unwind_got_constant): Update.
214 * frv-linux-tdep.c (frv_linux_pc_in_sigtramp,
215 frv_linux_sigcontext_reg_addr, frv_linux_sigtramp_frame_cache):
217 * frv-tdep.c (frv_analyze_prologue, frv_skip_main_prologue,
218 frv_extract_return_value, find_func_descr,
219 frv_convert_from_func_ptr_addr, frv_push_dummy_call): Update.
220 * f-valprint.c (f_val_print): Update.
221 * gnu-v3-abi.c (gnuv3_decode_method_ptr, gnuv3_make_method_ptr):
223 * h8300-tdep.c (h8300_is_argument_spill, h8300_analyze_prologue,
224 h8300_push_dummy_call, h8300_extract_return_value,
225 h8300h_extract_return_value, h8300_store_return_value,
226 h8300h_store_return_value): Update.
227 * hppabsd-tdep.c (hppabsd_find_global_pointer): Update.
228 * hppa-hpux-nat.c (hppa_hpux_fetch_register, hppa_hpux_store_register):
230 * hppa-hpux-tdep.c (hppa32_hpux_in_solib_call_trampoline,
231 hppa64_hpux_in_solib_call_trampoline,
232 hppa_hpux_in_solib_return_trampoline, hppa_hpux_skip_trampoline_code,
233 hppa_hpux_sigtramp_frame_unwind_cache,
234 hppa_hpux_sigtramp_unwind_sniffer, hppa32_hpux_find_global_pointer,
235 hppa64_hpux_find_global_pointer, hppa_hpux_search_pattern,
236 hppa32_hpux_search_dummy_call_sequence,
237 hppa64_hpux_search_dummy_call_sequence, hppa_hpux_supply_save_state,
238 hppa_hpux_unwind_adjust_stub): Update.
239 * hppa-linux-tdep.c (insns_match_pattern,
240 hppa_linux_find_global_pointer): Update.
241 * hppa-tdep.c (hppa_in_function_epilogue_p, hppa32_push_dummy_call,
242 hppa64_convert_code_addr_to_fptr, hppa64_push_dummy_call,
243 skip_prologue_hard_way, hppa_frame_cache, hppa_fallback_frame_cache,
244 hppa_pseudo_register_read, hppa_frame_prev_register_helper,
245 hppa_match_insns): Update.
246 * hpux-thread.c (hpux_thread_fetch_registers): Update.
247 * i386-tdep.c (i386bsd_sigcontext_addr): Update.
248 * i386-cygwin-tdep.c (core_process_module_section): Update.
249 * i386-darwin-nat.c (i386_darwin_sstep_at_sigreturn,
250 amd64_darwin_sstep_at_sigreturn): Update.
251 * i386-darwin-tdep.c (i386_darwin_sigcontext_addr,
252 amd64_darwin_sigcontext_addr): Likewise.
253 * i386-linux-nat.c (i386_linux_sigcontext_addr): Update.
254 * i386nbsd-tdep.c (i386nbsd_sigtramp_cache_init): Update.
255 * i386-nto-tdep.c (i386nto_sigcontext_addr): Update.
256 * i386obsd-nat.c (i386obsd_supply_pcb): Update.
257 * i386obsd-tdep.c (i386obsd_supply_uthread, i386obsd_collect_uthread,
258 i386obsd_trapframe_cache): Update.
259 * i386-tdep.c (i386_displaced_step_fixup, i386_follow_jump,
260 i386_analyze_frame_setup, i386_analyze_prologue,
261 i386_skip_main_prologue, i386_frame_cache, i386_sigtramp_frame_cache,
262 i386_get_longjmp_target, i386_push_dummy_call,
263 i386_pe_skip_trampoline_code, i386_svr4_sigcontext_addr,
264 i386_fetch_pointer_argument): Update.
265 * i387-tdep.c (i387_supply_fsave): Update.
266 * ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Update.
267 * ia64-tdep.c (ia64_pseudo_register_read, ia64_pseudo_register_write,
268 examine_prologue, ia64_frame_cache, ia64_frame_prev_register,
269 ia64_sigtramp_frame_cache, ia64_sigtramp_frame_prev_register,
270 ia64_access_reg, ia64_access_rse_reg, ia64_libunwind_frame_this_id,
271 ia64_libunwind_frame_prev_register,
272 ia64_libunwind_sigtramp_frame_this_id,
273 ia64_libunwind_sigtramp_frame_prev_register, ia64_find_global_pointer,
274 find_extant_func_descr, find_func_descr,
275 ia64_convert_from_func_ptr_addr, ia64_push_dummy_call, ia64_dummy_id,
276 ia64_unwind_pc): Update.
277 * iq2000-tdep.c (iq2000_pointer_to_address, iq2000_address_to_pointer,
278 iq2000_scan_prologue, iq2000_extract_return_value,
279 iq2000_push_dummy_call): Update.
280 * irix5nat.c (fill_gregset): Update.
281 * jv-lang.c (evaluate_subexp_java): Update.
282 * jv-valprint.c (java_value_print): Update.
283 * lm32-tdep.c (lm32_analyze_prologue, lm32_push_dummy_call,
284 lm32_extract_return_value, lm32_store_return_value): Update.
285 * m32c-tdep.c (m32c_push_dummy_call, m32c_return_value,
286 m32c_skip_trampoline_code, m32c_m16c_address_to_pointer,
287 m32c_m16c_pointer_to_address): Update.
288 * m32r-tdep.c (m32r_store_return_value, decode_prologue,
289 m32r_skip_prologue, m32r_push_dummy_call, m32r_extract_return_value):
291 * m68hc11-tdep.c (m68hc11_pseudo_register_read,
292 m68hc11_pseudo_register_write, m68hc11_analyze_instruction,
293 m68hc11_push_dummy_call): Update.
294 * m68linux-tdep.c (m68k_linux_pc_in_sigtramp,
295 m68k_linux_get_sigtramp_info, m68k_linux_sigtramp_frame_cache):
297 * m68k-tdep.c (m68k_push_dummy_call, m68k_analyze_frame_setup,
298 m68k_analyze_register_saves, m68k_analyze_prologue, m68k_frame_cache,
299 m68k_get_longjmp_target): Update.
300 * m88k-tdep.c (m88k_fetch_instruction): Update.
301 * mep-tdep.c (mep_pseudo_cr32_read, mep_pseudo_csr_write,
302 mep_pseudo_cr32_write, mep_get_insn, mep_push_dummy_call): Update.
303 * mi/mi-main.c (mi_cmd_data_write_memory): Update.
304 * mips-linux-tdep.c (mips_linux_get_longjmp_target, supply_32bit_reg,
305 mips64_linux_get_longjmp_target, mips64_fill_gregset,
306 mips64_fill_fpregset, mips_linux_in_dynsym_stub): Update.
307 * mipsnbdsd-tdep.c (mipsnbsd_get_longjmp_target): Update.
308 * mips-tdep.c (mips_fetch_instruction, fetch_mips_16,
309 mips_eabi_push_dummy_call, mips_n32n64_push_dummy_call,
310 mips_o32_push_dummy_call, mips_o64_push_dummy_call,
311 mips_single_step_through_delay, mips_skip_pic_trampoline_code,
312 mips_integer_to_address): Update.
313 * mn10300-tdep.c (mn10300_analyze_prologue, mn10300_push_dummy_call):
315 * monitor.c (monitor_supply_register, monitor_write_memory,
316 monitor_read_memory_single): Update.
317 * moxie-tdep.c (moxie_store_return_value, moxie_extract_return_value,
318 moxie_analyze_prologue): Update.
319 * mt-tdep.c (mt_return_value, mt_skip_prologue, mt_select_coprocessor,
320 mt_pseudo_register_read, mt_pseudo_register_write, mt_registers_info,
321 mt_push_dummy_call): Update.
322 * objc-lang.c (read_objc_method, read_objc_methlist_nmethods,
323 read_objc_methlist_method, read_objc_object, read_objc_super,
324 read_objc_class, find_implementation_from_class): Update.
325 * ppc64-linux-tdep.c (ppc64_desc_entry_point,
326 ppc64_linux_convert_from_func_ptr_addr, ppc_linux_sigtramp_cache):
328 * ppcobsd-tdep.c (ppcobsd_sigtramp_frame_sniffer,
329 ppcobsd_sigtramp_frame_cache): Update.
330 * ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call,
331 do_ppc_sysv_return_value, ppc64_sysv_abi_push_dummy_call,
332 ppc64_sysv_abi_return_value): Update.
333 * ppc-linux-nat.c (ppc_linux_auxv_parse): Update.
334 * procfs.c (procfs_auxv_parse): Update.
335 * p-valprint.c (pascal_val_print): Update.
336 * regcache.c (regcache_raw_read_signed, regcache_raw_read_unsigned,
337 regcache_raw_write_signed, regcache_raw_write_unsigned,
338 regcache_cooked_read_signed, regcache_cooked_read_unsigned,
339 regcache_cooked_write_signed, regcache_cooked_write_unsigned): Update.
340 * remote-m32r-sdi.c (m32r_fetch_register): Update.
341 * remote-mips.c (mips_wait, mips_fetch_registers, mips_xfer_memory):
343 * rs6000-aix-tdep.c (rs6000_push_dummy_call, rs6000_return_value,
344 rs6000_convert_from_func_ptr_addr, branch_dest,
345 rs6000_software_single_step): Update.
346 * rs6000-tdep.c (rs6000_in_function_epilogue_p,
347 ppc_displaced_step_fixup, ppc_deal_with_atomic_sequence,
348 bl_to_blrl_insn_p, rs6000_fetch_instruction, skip_prologue,
349 rs6000_skip_main_prologue, rs6000_skip_trampoline_code,
350 rs6000_frame_cache): Update.
351 * s390-tdep.c (s390_pseudo_register_read, s390_pseudo_register_write,
352 s390x_pseudo_register_read, s390x_pseudo_register_write, s390_load,
353 s390_backchain_frame_unwind_cache, s390_sigtramp_frame_unwind_cache,
354 extend_simple_arg, s390_push_dummy_call, s390_return_value): Update.
355 * scm-exp.c (scm_lreadr): Update.
356 * scm-lang.c (scm_get_field, scm_unpack): Update.
357 * scm-valprint.c (scm_val_print): Update.
358 * score-tdep.c (score_breakpoint_from_pc, score_push_dummy_call,
359 score_fetch_inst): Update.
360 * sh64-tdep.c (look_for_args_moves, sh64_skip_prologue_hard_way,
361 sh64_analyze_prologue, sh64_push_dummy_call, sh64_extract_return_value,
362 sh64_pseudo_register_read, sh64_pseudo_register_write,
363 sh64_frame_prev_register): Update:
364 * sh-tdep.c (sh_analyze_prologue, sh_push_dummy_call_fpu,
365 sh_push_dummy_call_nofpu, sh_extract_return_value_nofpu,
366 sh_store_return_value_nofpu, sh_in_function_epilogue_p): Update.
367 * solib-darwin.c (darwin_load_image_infos): Update.
368 * solib-frv.c (fetch_loadmap, lm_base, frv_current_sos, enable_break2,
369 find_canonical_descriptor_in_load_object): Update.
370 * solib-irix.c (extract_mips_address, fetch_lm_info, irix_current_sos,
371 irix_open_symbol_file_object): Update.
372 * solib-som.c (som_solib_create_inferior_hook, link_map_start,
373 som_current_sos, som_open_symbol_file_object): Update.
374 * solib-sunos.c (SOLIB_EXTRACT_ADDRESS, LM_ADDR, LM_NEXT, LM_NAME):
376 * solib-svr4.c (read_program_header, scan_dyntag_auxv,
377 solib_svr4_r_ldsomap): Update.
378 * sparc64-linux-tdep.c (sparc64_linux_step_trap): Update.
379 * sparc64obsd-tdep.c (sparc64obsd_supply_uthread,
380 sparc64obsd_collect_uthread): Update.
381 * sparc64-tdep.c (sparc64_pseudo_register_read,
382 sparc64_pseudo_register_write, sparc64_supply_gregset,
383 sparc64_collect_gregset): Update.
384 * sparc-linux-tdep.c (sparc32_linux_step_trap): Update.
385 * sparcobsd-tdep.c (sparc32obsd_supply_uthread,
386 sparc32obsd_collect_uthread): Update.
387 * sparc-tdep.c (sparc_fetch_wcookie, sparc32_push_dummy_code,
388 sparc32_store_arguments, sparc32_return_value, sparc_supply_rwindow,
389 sparc_collect_rwindow): Update.
390 * spu-linux-nat.c (parse_spufs_run): Update.
391 * spu-tdep.c (spu_pseudo_register_read_spu,
392 spu_pseudo_register_write_spu, spu_pointer_to_address,
393 spu_analyze_prologue, spu_in_function_epilogue_p,
394 spu_frame_unwind_cache, spu_push_dummy_call, spu_software_single_step,
395 spu_get_longjmp_target, spu_get_overlay_table, spu_overlay_update_osect,
396 info_spu_signal_command, info_spu_mailbox_list, info_spu_dma_cmdlist,
397 info_spu_dma_command, info_spu_proxydma_command): Update.
398 * stack.c (print_frame_nameless_args, frame_info): Update.
399 * symfile.c (read_target_long_array, simple_read_overlay_table,
400 simple_read_overlay_region_table): Update.
401 * target.c (debug_print_register): Update.
402 * tramp-frame.c (tramp_frame_start): Update.
403 * v850-tdep.c (v850_analyze_prologue, v850_push_dummy_call,
404 v850_extract_return_value, v850_store_return_value,
405 * valarith.c (value_binop, value_bit_index): Update.
406 * valops.c (value_cast): Update.
407 * valprint.c (val_print_type_code_int, val_print_string,
408 read_string): Update.
409 * value.c (unpack_long, unpack_double, unpack_field_as_long,
410 modify_field, pack_long): Update.
411 * vax-tdep.c (vax_store_arguments, vax_push_dummy_call,
412 vax_skip_prologue): Update.
413 * xstormy16-tdep.c (xstormy16_push_dummy_call,
414 xstormy16_analyze_prologue, xstormy16_in_function_epilogue_p,
415 xstormy16_resolve_jmp_table_entry, xstormy16_find_jmp_table_entry,
416 xstormy16_pointer_to_address, xstormy16_address_to_pointer): Update.
417 * xtensa-tdep.c (extract_call_winsize, xtensa_pseudo_register_read,
418 xtensa_pseudo_register_write, xtensa_frame_cache,
419 xtensa_push_dummy_call, call0_track_op, call0_frame_cache): Update.
422 * dfp.h (decimal_to_string, decimal_from_string, decimal_from_integral,
423 decimal_from_floating, decimal_to_doublest, decimal_is_zero): Add
424 BYTE_ORDER parameter.
425 (decimal_binop): Add BYTE_ORDER_X, BYTE_ORDER_Y, and BYTE_ORDER_RESULT
427 (decimal_compare): Add BYTE_ORDER_X and BYTE_ORDER_Y parameters.
428 (decimal_convert): Add BYTE_ORDER_FROM and BYTE_ORDER_TO parameters.
429 * dfp.c (match_endianness): Add BYTE_ORDER parameter. Use it
430 instead of current_gdbarch.
431 (decimal_to_string, decimal_from_integral, decimal_from_floating,
432 decimal_to_doublest, decimal_is_zero): Add BYTE_ORDER parameter.
433 Pass it to match_endianness.
434 (decimal_binop): Add BYTE_ORDER_X, BYTE_ORDER_Y, and BYTE_ORDER_RESULT
435 parameters. Pass them to match_endianness.
436 (decimal_compare): Add BYTE_ORDER_X and BYTE_ORDER_Y parameters.
437 Pass them to match_endianness.
438 (decimal_convert): Add BYTE_ORDER_FROM and BYTE_ORDER_TO parameters.
439 Pass them to match_endianness.
440 * valarith.c (value_args_as_decimal): Add BYTE_ORDER_X and
441 BYTE_ORDER_Y output parameters.
442 (value_binop): Update call to value_args_as_decimal.
444 Update calls to decimal_to_string, decimal_from_string,
445 decimal_from_integral, decimal_from_floating, decimal_to_doublest,
446 decimal_is_zero, decimal_binop, decimal_compare and decimal_convert
447 to pass/receive byte order:
448 * c-exp.y (parse_number): Update.
449 * printcmd.c (printf_command): Update.
450 * valarith.c (value_args_as_decimal, value_binop, value_logical_not,
451 value_equal, value_less): Update.
452 * valops.c (value_cast, value_one): Update.
453 * valprint.c (print_decimal_floating): Update.
454 * value.c (unpack_long, unpack_double): Update.
455 * python/python-value.c (valpy_nonzero): Update.
458 * ada-valprint.c (char_at): Add BYTE_ORDER parameter.
459 (printstr): Update calls to char_at.
460 (ada_val_print_array): Likewise.
461 * valprint.c (read_string): Add BYTE_ORDER parameter.
462 (val_print_string): Update call to read_string.
463 * c-lang.c (c_get_string): Likewise.
464 * charset.h (target_wide_charset): Add BYTE_ORDER parameter.
465 * charset.c (target_wide_charset): Add BYTE_ORDER parameter.
466 Use it instead of current_gdbarch.
467 * printcmd.c (printf_command): Update calls to target_wide_charset.
468 * c-lang.c (charset_for_string_type): Add BYTE_ORDER parameter.
469 Pass to target_wide_charset. Use it instead of current_gdbarch.
470 (classify_type): Add BYTE_ORDER parameter. Pass to
471 charset_for_string_type. Allow NULL encoding pointer.
472 (print_wchar): Add BYTE_ORDER parameter.
473 (c_emit_char): Update calls to classify_type and print_wchar.
474 (c_printchar, c_printstr): Likewise.
477 * gdbarch.sh (in_solib_return_trampoline): Convert to type "m".
478 * gdbarch.c, gdbarch.h: Regenerate.
479 * arch-utils.h (generic_in_solib_return_trampoline): Add GDBARCH
481 * arch-utils.c (generic_in_solib_return_trampoline): Likewise.
482 * hppa-hpux-tdep.c (hppa_hpux_in_solib_return_trampoline): Likewise.
483 * rs6000-tdep.c (rs6000_in_solib_return_trampoline): Likewise.
484 (rs6000_skip_trampoline_code): Update call.
486 * alpha-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to
487 dynamic_sigtramp_offset and pc_in_sigtramp callbacks.
488 (alpha_read_insn): Add GDBARCH parameter.
489 * alpha-tdep.c (alpha_lds, alpha_sts): Add GDBARCH parameter.
490 (alpha_register_to_value): Pass architecture to alpha_sts.
491 (alpha_extract_return_value): Likewise.
492 (alpha_value_to_register): Pass architecture to alpha_lds.
493 (alpha_store_return_value): Likewise.
494 (alpha_read_insn): Add GDBARCH parameter.
495 (alpha_skip_prologue): Pass architecture to alpha_read_insn.
496 (alpha_heuristic_proc_start): Likewise.
497 (alpha_heuristic_frame_unwind_cache): Likewise.
498 (alpha_next_pc): Likewise.
499 (alpha_sigtramp_frame_this_id): Pass architecture to
500 tdep->dynamic_sigtramp_offset callback.
501 (alpha_sigtramp_frame_sniffer): Pass architecture to
502 tdep->pc_in_sigtramp callback.
503 * alphafbsd-tdep.c (alphafbsd_pc_in_sigtramp): Add GDBARCH parameter.
504 (alphafbsd_sigtramp_offset): Likewise.
505 * alpha-linux-tdep.c (alpha_linux_sigtramp_offset_1): Add GDBARCH
506 parameter. Pass to alpha_read_insn.
507 (alpha_linux_sigtramp_offset): Add GDBARCH parameter. Pass to
508 alpha_linux_sigtramp_offset_1.
509 (alpha_linux_pc_in_sigtramp): Add GDBARCH parameter. Pass to
510 alpha_linux_sigtramp_offset.
511 (alpha_linux_sigcontext_addr): Pass architecture to alpha_read_insn
512 and alpha_linux_sigtramp_offset.
513 * alphanbsd-tdep.c (alphanbsd_sigtramp_offset): Add GDBARCH parameter.
514 (alphanbsd_pc_in_sigtramp): Add GDBARCH parameter. Pass to
515 alphanbsd_sigtramp_offset.
516 * alphaobsd-tdep.c (alphaobsd_sigtramp_offset): Add GDBARCH parameter.
517 (alphaobsd_pc_in_sigtramp): Add GDBARCH parameter. Pass to
519 (alphaobsd_sigcontext_addr): Pass architecture to
520 alphaobsd_sigtramp_offset.
521 * alpha-osf1-tdep.c (alpha_osf1_pc_in_sigtramp): Add GDBARCH
524 * amd64-tdep.c (amd64_analyze_prologue): Add GDBARCH parameter.
525 (amd64_skip_prologue): Pass architecture to amd64_analyze_prologue.
526 (amd64_frame_cache): Likewise.
528 * arm-tdep.c (SWAP_SHORT, SWAP_INT): Remove.
529 (thumb_analyze_prologue, arm_skip_prologue, arm_scan_prologue,
530 thumb_get_next_pc, arm_get_next_pc): Do not use SWAP_ macros.
531 * arm-wince-tdep.c: Include "frame.h".
533 * avr-tdep.c (EXTRACT_INSN): Remove.
534 (avr_scan_prologue): Add GDBARCH argument, inline EXTRACT_INSN.
535 (avr_skip_prologue): Pass architecture to avr_scan_prologue.
536 (avr_frame_unwind_cache): Likewise.
538 * cris-tdep.c (struct instruction_environment): Add BYTE_ORDER member.
539 (find_step_target): Initialize it.
540 (get_data_from_address): Add BYTE_ORDER parameter.
541 (bdap_prefix): Pass byte order to get_data_from_address.
542 (handle_prefix_assign_mode_for_aritm_op): Likewise.
543 (three_operand_add_sub_cmp_and_or_op): Likewise.
544 (handle_inc_and_index_mode_for_aritm_op): Likewise.
546 * frv-linux-tdep.c (frv_linux_pc_in_sigtramp): Add GDBARCH parameter.
547 (frv_linux_sigcontext_reg_addr): Pass architecture to
548 frv_linux_pc_in_sigtramp.
549 (frv_linux_sigtramp_frame_sniffer): Likewise.
551 * h8300-tdep.c (h8300_is_argument_spill): Add GDBARCH parameter.
552 (h8300_analyze_prologue): Add GDBARCH parameter. Pass to
553 h8300_is_argument_spill.
554 (h8300_frame_cache, h8300_skip_prologue): Pass architecture
555 to h8300_analyze_prologue.
557 * hppa-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to
558 in_solib_call_trampoline callback.
559 (hppa_in_solib_call_trampoline): Add GDBARCH parameter.
560 * hppa-tdep.c (hppa64_convert_code_addr_to_fptr): Add GDBARCH
562 (hppa64_push_dummy_call): Pass architecture to
563 hppa64_convert_code_addr_to_fptr.
564 (hppa_match_insns): Add GDBARCH parameter.
565 (hppa_match_insns_relaxed): Add GDBARCH parameter. Pass to
567 (hppa_skip_trampoline_code): Pass architecture to hppa_match_insns.
568 (hppa_in_solib_call_trampoline): Add GDBARCH parameter. Pass to
569 hppa_match_insns_relaxed.
570 (hppa_stub_unwind_sniffer): Pass architecture to
571 tdep->in_solib_call_trampoline callback.
572 * hppa-hpux-tdep.c (hppa_hpux_search_pattern): Add GDBARCH parameter.
573 (hppa32_hpux_search_dummy_call_sequence): Pass architecture to
574 hppa_hpux_search_pattern.
575 * hppa-linux-tdep.c (insns_match_pattern): Add GDBARCH parameter.
576 (hppa_linux_sigtramp_find_sigcontext): Add GDBARCH parameter.
577 Pass to insns_match_pattern.
578 (hppa_linux_sigtramp_frame_unwind_cache): Pass architecture to
579 hppa_linux_sigtramp_find_sigcontext.
580 (hppa_linux_sigtramp_frame_sniffer): Likewise.
581 (hppa32_hpux_in_solib_call_trampoline): Add GDBARCH parameter.
582 (hppa64_hpux_in_solib_call_trampoline): Likewise.
584 * i386-tdep.c (i386_follow_jump): Add GDBARCH parameter.
585 (i386_analyze_frame_setup): Add GDBARCH parameter.
586 (i386_analyze_prologue): Add GDBARCH parameter. Pass to
587 i386_follow_jump and i386_analyze_frame_setup.
588 (i386_skip_prologue): Pass architecture to i386_analyze_prologue
589 and i386_follow_jump.
590 (i386_frame_cache): Pass architecture to i386_analyze_prologue.
591 (i386_pe_skip_trampoline_code): Add FRAME parameter.
592 * i386-tdep.h (i386_pe_skip_trampoline_code): Add FRAME parameter.
593 * i386-cygwin-tdep.c (i386_cygwin_skip_trampoline_code): Pass
594 frame to i386_pe_skip_trampoline_code.
596 * ia64-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter
597 to sigcontext_register_address callback.
598 * ia64-tdep.c (ia64_find_global_pointer): Add GDBARCH parameter.
599 (ia64_find_unwind_table): Pass architecture to
600 ia64_find_global_pointer.
601 (find_extant_func_descr): Add GDBARCH parameter.
602 (find_func_descr): Pass architecture to find_extant_func_descr
603 and ia64_find_global_pointer.
604 (ia64_sigtramp_frame_init_saved_regs): Pass architecture to
605 tdep->sigcontext_register_address callback.
606 * ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Add
609 * iq2000-tdep.c (iq2000_scan_prologue): Add GDBARCH parameter.
610 (iq2000_frame_cache): Pass architecture to iq2000_scan_prologue.
612 * lm32-tdep.c (lm32_analyze_prologue): Add GDBARCH parameter.
613 (lm32_skip_prologue, lm32_frame_cache): Pass architecture to
614 lm32_analyze_prologue.
616 * m32r-tdep.c (decode_prologue): Add GDBARCH parameter.
617 (m32r_skip_prologue): Pass architecture to decode_prologue.
619 * m68hc11-tdep.c (m68hc11_analyze_instruction): Add GDBARCH parameter.
620 (m68hc11_scan_prologue): Pass architecture to
621 m68hc11_analyze_instruction.
623 * m68k-tdep.c (m68k_analyze_frame_setup): Add GDBARCH parameter.
624 (m68k_analyze_prologue): Pass architecture to
625 m68k_analyze_frame_setup.
627 * m88k-tdep.c (m88k_fetch_instruction): Add BYTE_ORDER parameter.
628 (m88k_analyze_prologue): Add GDBARCH parameter. Pass byte order
629 to m88k_fetch_instruction.
630 (m88k_skip_prologue): Pass architecture to m88k_analyze_prologue.
631 (m88k_frame_cache): Likewise.
633 * mep-tdep.c (mep_get_insn): Add GDBARCH parameter.
634 (mep_analyze_prologue): Pass architecture to mep_get_insn.
636 * mips-tdep.c (mips_fetch_instruction): Add GDBARCH parameter.
637 (mips32_next_pc): Pass architecture to mips_fetch_instruction.
638 (deal_with_atomic_sequence): Likewise.
639 (unpack_mips16): Add GDBARCH parameter, pass to mips_fetch_instruction.
640 (mips16_scan_prologue): Likewise.
641 (mips32_scan_prologue): Likewise.
642 (mips16_in_function_epilogue_p): Likewise.
643 (mips32_in_function_epilogue_p): Likewise.
644 (mips_about_to_return): Likewise.
645 (mips_insn16_frame_cache): Pass architecture to mips16_scan_prologue.
646 (mips_insn32_frame_cache): Pass architecture to mips32_scan_prologue.
647 (mips_skip_prologue): Pass architecture to mips16_scan_prologue
648 and mips32_scan_prologue.
649 (mips_in_function_epilogue_p): Pass architecture to
650 mips16_in_function_epilogue_p and
651 mips32_in_function_epilogue_p.
652 (heuristic_proc_start): Pass architecture to mips_fetch_instruction
653 and mips_about_to_return.
654 (mips_skip_mips16_trampoline_code): Pass architecture to
655 mips_fetch_instruction.
656 (fetch_mips_16): Add GDBARCH parameter.
657 (mips16_next_pc): Pass architecture to fetch_mips_16.
658 (extended_mips16_next_pc): Pass architecture to unpack_mips16 and
661 * objc-lang.c (read_objc_method, read_objc_methlist_nmethods,
662 read_objc_methlist_method, read_objc_object, read_objc_super,
663 read_objc_class): Add GDBARCH parameter.
664 (find_implementation_from_class): Add GDBARCH parameter, pass
665 to read_objc_class, read_objc_methlist_nmethods, and
666 read_objc_methlist_method.
667 (find_implementation): Add GDBARCH parameter, pass to
668 read_objc_object and find_implementation_from_class.
669 (resolve_msgsend, resolve_msgsend_stret): Pass architecture
670 to find_implementation.
671 (resolve_msgsend_super, resolve_msgsend_super_stret): Pass
672 architecture to read_objc_super and find_implementation_from_class.
674 * ppc64-linux-tdep.c (ppc64_desc_entry_point): Add GDBARCH parameter.
675 (ppc64_standard_linkage1_target, ppc64_standard_linkage2_target,
676 ppc64_standard_linkage3_target): Pass architecture to
677 ppc64_desc_entry_point.
678 * rs6000-tdep.c (bl_to_blrl_insn_p): Add BYTE_ORDER parameter.
679 (skip_prologue): Pass byte order to bl_to_blrl_insn_p.
680 (rs6000_fetch_instruction): Add GDBARCH parameter.
681 (rs6000_skip_stack_check): Add GDBARCH parameter, pass to
682 rs6000_fetch_instruction.
683 (skip_prologue): Pass architecture to rs6000_fetch_instruction.
685 * remote-mips.c (mips_store_word): Return old_contents as host
686 integer value instead of target bytes.
688 * s390-tdep.c (struct s390_prologue_data): Add BYTE_ORDER member.
689 (s390_analyze_prologue): Initialize it.
690 (extend_simple_arg): Add GDBARCH parameter.
691 (s390_push_dummy_call): Pass architecture to extend_simple_arg.
693 * scm-lang.c (scm_get_field): Add BYTE_ORDER parameter.
694 * scm-lang.h (scm_get_field): Add BYTE_ORDER parameter.
695 (SCM_CAR, SCM_CDR): Pass SCM_BYTE_ORDER to scm_get_field.
696 * scm-valprint.c (scm_scmval_print): Likewise.
697 (scm_scmlist_print, scm_ipruk, scm_scmval_print): Define
700 * sh64-tdep.c (look_for_args_moves): Add GDBARCH parameter.
701 (sh64_skip_prologue_hard_way): Add GDBARCH parameter, pass to
703 (sh64_skip_prologue): Pass architecture to
704 sh64_skip_prologue_hard_way.
705 * sh-tdep.c (sh_analyze_prologue): Add GDBARCH parameter.
706 (sh_skip_prologue): Pass architecture to sh_analyze_prologue.
707 (sh_frame_cache): Likewise.
709 * solib-irix.c (extract_mips_address): Add GDBARCH parameter.
710 (fetch_lm_info, irix_current_sos, irix_open_symbol_file_object):
711 Pass architecture to extract_mips_address.
713 * sparc-tdep.h (sparc_fetch_wcookie): Add GDBARCH parameter.
714 * sparc-tdep.c (sparc_fetch_wcookie): Add GDBARCH parameter.
715 (sparc_supply_rwindow, sparc_collect_rwindow): Pass architecture
716 to sparc_fetch_wcookie.
717 (sparc32_frame_prev_register): Likewise.
718 * sparc64-tdep.c (sparc64_frame_prev_register): Likewise.
719 * sparc32nbsd-tdep.c (sparc32nbsd_sigcontext_saved_regs): Likewise.
720 * sparc64nbsd-tdep.c (sparc64nbsd_sigcontext_saved_regs): Likewise.
722 * spu-tdep.c (spu_analyze_prologue): Add GDBARCH parameter.
723 (spu_skip_prologue): Pass architecture to spu_analyze_prologue.
724 (spu_virtual_frame_pointer): Likewise.
725 (spu_frame_unwind_cache): Likewise.
726 (info_spu_mailbox_list): Add BYTE_ORER parameter.
727 (info_spu_mailbox_command): Pass byte order to info_spu_mailbox_list.
728 (info_spu_dma_cmdlist): Add BYTE_ORER parameter.
729 (info_spu_dma_command, info_spu_proxydma_command): Pass byte order
730 to info_spu_dma_cmdlist.
732 * symfile.c (read_target_long_array): Add GDBARCH parameter.
733 (simple_read_overlay_table, simple_read_overlay_region_table,
734 simple_overlay_update_1): Pass architecture to read_target_long_array.
736 * v850-tdep.c (v850_analyze_prologue): Add GDBARCH parameter.
737 (v850_frame_cache): Pass architecture to v850_analyze_prologue.
739 * xstormy16-tdep.c (xstormy16_analyze_prologue): Add GDBARCH
741 (xstormy16_skip_prologue, xstormy16_frame_cache): Pass architecture
742 to xstormy16_analyze_prologue.
743 (xstormy16_resolve_jmp_table_entry): Add GDBARCH parameter.
744 (xstormy16_find_jmp_table_entry): Likewise.
745 (xstormy16_skip_trampoline_code): Pass architecture to
746 xstormy16_resolve_jmp_table_entry.
747 (xstormy16_pointer_to_address): Likewise.
748 (xstormy16_address_to_pointer): Pass architecture to
749 xstormy16_find_jmp_table_entry.
751 * xtensa-tdep.c (call0_track_op): Add GDBARCH parameter.
752 (call0_analyze_prologue): Add GDBARCH parameter, pass to
754 (call0_frame_cache): Pass architecture to call0_analyze_prologue.
755 (xtensa_skip_prologue): Likewise.
757 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
759 * defs.h (strlen_paddr, paddr, paddr_nz): Remove.
760 (paddress): Add GDBARCH parameter.
761 * utils.c (strlen_paddr, paddr, paddr_nz): Remove.
762 (paddress): Add GDBARCH parameter, use it instead of current_gdbarch.
763 * ui-out.h (ui_out_field_core_addr): Add GDBARCH parameter.
764 * ui-out.c (ui_out_field_core_addr): Add GDBARCH parameter,
765 use it instead of current_gdbarch.
767 Update calls to ui_out_field_core_addr to pass architecture:
768 * ada-lang.c (print_one_exception): Update.
769 * breakpoint.c (print_one_breakpoint_location,
770 print_one_exception_catchpoint): Update.
771 * disasm.c (dump_insns): Update.
772 * darwin-nat-info.c (darwin_debug_regions_recurse): Update.
773 * mi/mi-main.c (mi_cmd_data_read_memory): Update.
774 * mi/mi-symbol-cmds.c: Include "objfiles.h".
775 (mi_cmd_symbol_list_lines): Update.
776 * stack.c (print_frame_info, print_frame): Update.
778 Update callers of paddress to pass architecture:
779 * ada-tasks.c (info_task): Update.
780 * ada-valprint.c (ada_val_print_1): Update.
781 * annotate.c (annotate_source, annotate_frame_begin): Update.
782 * breakpoint.c (insert_bp_location, describe_other_breakpoints,
784 * cli/cli-cmds.c (edit_command, list_command, print_disassembly):
786 * corefile.c (memory_error): Update.
787 * c-valprint.c (print_function_pointer_address, c_val_print): Update.
788 * disasm.c (dis_asm_print_address): Update.
789 * exec.c (print_section_info): Update.
790 * f-valprint.c (f_val_print): Update.
791 * infcmd.c: Include "arch-utils.h".
792 (jump_command, program_info): Update.
793 * linux-fork.c: Include "arch-utils.h".
794 (info_forks_command): Update.
795 * m2-valprint.c (print_function_pointer_address,
796 print_unpacked_pointer, print_variable_at_address,
797 m2_val_print): Update.
798 * m32r-rom.c (m32r_load_section, m32r_load, m32r_upload_command):
800 * printcmd.c (print_address, print_address_demangle, address_info):
802 * p-valprint.c (pascal_val_print): Update.
803 * source.c: Include "arch-utils.h".
805 * stack.c (frame_info, print_block_frame_labels): Update.
806 * symfile.c (add_symbol_file_command, list_overlays_command): Update.
807 * symmisc.c (dump_msymbols, dump_psymtab, dump_symtab_1,
808 print_symbol, print_partial_symbols, maintenance_info_psymtabs,
809 maintenance_check_symtabs): Update.
810 * symtab.c (find_pc_sect_symtab): Update.
811 * target.c (deprecated_debug_xfer_memory): Update.
812 * tracepoint.c (scope_info): Update.
813 * tui/tui-stack.c (tui_make_status_line): Update.
814 * valprint.c (val_print_string): Update.
816 Update callers of paddr_nz to use paddress instead (keeping
817 user-visible output identical):
818 * alpha-tdep.c (alpha_heuristic_proc_start): Update.
819 * amd64-tdep.c (fixup_riprel, amd64_displaced_step_copy_insn,
820 amd64_displaced_step_fixup): Update.
821 * arch-utils.c (simple_displaced_step_copy_insn): Update.
822 * auxv.c (fprint_target_auxv): Update.
823 * breakpoint.c (insert_single_step_breakpoint): Update.
824 * buildsym.c (finish_block): Update.
825 * cli/cli-dump.c (restore_section_callback): Update.
826 * fbsd-nat.c (fbsd_find_memory_regions): Update.
827 * frame.c (frame_unwind_register_value): Update.
828 * gcore.c (gcore_create_callback): Update.
829 * hppa-tdep.c (hppa_frame_cache, hppa_skip_trampoline_code): Update.
830 * i386-tdep.c (i386_displaced_step_fixup, i386_record_modrm,
831 i386_record_lea_modrm_addr, i386_record_lea_modrm,
832 i386_process_record): Update.
833 * ia64-tdep.c (ia64_frame_this_id, ia64_sigtramp_frame_this_id,
834 ia64_libunwind_frame_this_id, ia64_libunwind_sigtramp_frame_this_id,
835 ia64_dummy_id, ia64_access_reg, ia64_access_rse_reg): Update.
836 * infrun.c (displaced_step_prepare, displaced_step_fixup,
837 handle_inferior_event, insert_step_resume_breakpoint_at_sal,
838 insert_longjmp_resume_breakpoint): Update.
839 * linux-nat.c (linux_nat_find_memory_regions): Update.
840 * linux-record.c (record_linux_system_call): Update.
841 * mips-tdep.c (heuristic_proc_start, mips_eabi_push_dummy_call,
842 mips_n32n64_push_dummy_call, mips_o32_push_dummy_call,
843 mips_o64_push_dummy_call): Update.
844 * monitor.c (monitor_error, monitor_remove_breakpoint): Update.
845 * record.c (record_arch_list_add_mem, record_wait,
846 record_xfer_partial): Update.
847 * remote-mips.c (mips_fetch_word, mips_check_lsi_error,
848 mips_common_breakpoint): Update.
849 * remote-sim.c (gdbsim_xfer_inferior_memory): Update.
850 * rs6000-tdep.c (ppc_displaced_step_fixup): Update.
851 * solib-som.c (som_current_sos): Update.
852 * symfile.c (load_progress, generic_load): Update.
853 * symfile-mem.c (add_vsyscall_page): Update.
854 * valops.c (value_fetch_lazy): Update.
855 * windows-tdep.c (windows_xfer_shared_library): Update.
857 Update callers of paddr_nz to use paddress instead (changing
858 user-visible output to make it more correct):
859 * dwarf2loc.c (locexpr_describe_location): Update.
860 * ia64-tdep.c (ia64_memory_insert_breakpoint,
861 ia64_memory_remove_breakpoint): Update.
862 * jv-valprint.c (java_value_print): Update.
863 * m32c-tdep.c (m32c_m16c_address_to_pointer): Update.
864 * monitor.c (monitor_read_memory): Update.
866 Update callers of paddr to use paddress instead (changing
867 user-visible output to make it more correct):
868 * arm-tdep.c (arm_push_dummy_call): Update.
869 * breakpoint.c (insert_bp_location, create_thread_event_breakpoint,
870 create_breakpoint): Update.
871 * darwin-nat-info.c (darwin_debug_regions): Update.
872 * dcache.c (dcache_info): Update.
873 * dsrec.c (load_srec, make_srec): Update.
874 * dwarf2-frame.c (dwarf2_restore_rule, execute_cfa_program,
875 dwarf2_frame_cache): Update.
876 * gcore.c (gcore_copy_callback): Update.
877 * gnu-nat.c (gnu_xfer_memory): Update.
878 * mips-linux-nat.c (mips_show_dr): Update.
879 * monitor.c (monitor_write_memory, monitor_insert_breakpoint,
880 monitor_remove_breakpoint): Update.
881 * remote.c (compare_sections_command): Update.
882 * remote-m32r-sdi.c (m32r_xfer_memory, m32r_insert_breakpoint,
883 m32r_remove_breakpoint, m32r_insert_watchpoint,
884 m32r_remove_watchpoint): Update.
885 * sol-thread.c (info_cb): Update.
886 * symfile.c (load_progress): Update.
888 Update callers of paddress or paddr_nz to use hex_string instead
889 (changes output of internal/error/debug messages only):
890 * dwarf2read.c (dump_die_shallow): Update.
891 * frame.c (fprint_field, fprint_frame, frame_pc_unwind,
892 get_frame_func, create_new_frame): Update.
893 * hppa-tdep.c (find_unwind_entry, unwind_command): Update.
894 * ia64-tdep.c (get_kernel_table, ia64_find_proc_info_x,
895 ia64_get_dyn_info_list): Update.
896 * maint.c (maintenance_translate_address): Update.
897 * mi/mi-cmd-var.c (mi_cmd_var_create): Update.
898 * target.c (target_flash_erase): Update.
900 Update callers of paddr/paddr_nz to use phex/phex_nz instead,
901 using an appropriate address size. Remove use of strlen_paddr.
902 * exec.c (exec_files_info): Update.
903 * i386-nat.c (i386_show_dr): Update.
904 * remote.c (remote_flash_erase): Update.
905 * m32r-rom.c (m32r_load_section): Update.
906 * monitor.c (monitor_vsprintf, monitor_store_register): Update.
907 * remote.c (remote_check_symbols, remote_search_memory): Update.
908 * remote-mips.c (mips_request, mips_common_breakpoint): Update.
909 * scm-valprint.c (scm_ipruk, scm_scmval_print): Update.
910 * sh64-tdep.c (sh64_show_media_regs, sh64_show_compact_regs): Update.
911 * sh-tdep.c (sh_generic_show_regs, sh3_show_regs, sh2e_show_regs,
912 sh2a_show_regs, sh2a_nofpu_show_regs, sh3e_show_regs,
913 sh3_dsp_show_regs, sh4_show_regs, sh4_nofpu_show_regs,
914 sh_dsp_show_regs): Update.
915 * xcoffsolib.c (sharedlibrary_command): Update.
918 * maint.c (maint_print_section_info): Add ADDR_SIZE parameter.
919 Use hex_string_custom instead of paddr.
920 (print_bfd_section_info): Pass address size.
921 (print_objfile_section_info): Likewise.
923 * annotate.h (annotate_source): Add GDBARCH parameter.
924 (annotate_frame_begin): Likewise.
925 * annotate.c (annotate_source): Add GDBARCH parameter.
926 (annotate_frame_begin): Likewise.
927 * source.c (identify_source_line): Update call to annotate_source.
928 * stack.c (print_frame_info, print_frame): Update call to
929 annotate_frame_begin.
931 * breakpoint.c (describe_other_breakpoints): Add GDBARCH parameter.
932 (create_breakpoint, create_ada_exception_breakpoint): Update call.
934 * stack.c (print_block_frame_labels): Add GDBARCH parameter.
935 (print_frame_label_vars): Update call.
937 * symmisc.c (print_partial_symbols): Add GDBARCH parameter.
938 (dump_psymtab): Update call to print_partial_symbols.
939 (struct print_symbol_args): Add GDBARCH member.
940 (dump_symtab_1): Set print_symbol_args architecture member.
941 (print_symbol): Use it.
943 * windows-tdep.h (windows_xfer_shared_library): Add GDBARCH
945 * windows-tdep.c (windows_xfer_shared_library): Likewise.
946 * i386-cygwin-tdep.c (struct cpms_data): Add GDBARCH member.
947 (core_process_module_section): Pass architecture from cpms_data to
948 windows_xfer_shared_library.
949 (windows_core_xfer_shared_libraries): Initialize cmps_data
951 * windows-nat.c (windows_xfer_shared_libraries): Pass architecture
952 to windows_xfer_shared_library.
954 * defs.h (print_address): Add GDBARCH parameter.
955 * printcmd.c (print_address): Add GDBARCH parameter.
956 (print_scalar_formatted, do_examine): Update call.
957 * findcmd.c (find_command): Update call.
958 * tracepoint.c: Include "arch-utils.h".
959 (trace_find_line_command): Update call.
960 * tui/tui-disasm.c (tui_disassemble): Update call.
962 * value.h (print_address_demangle): Add GDBARCH parameter.
963 * printcmd.c (print_address_demangle): Add GDBARCH parameter.
964 * c-valprint.c (print_function_pointer_address, c_val_print):
966 * f-valprint.c (f_val_print): Update call.
967 * gnu-v3-abi.c (gnuv3_print_method_ptr): Update call.
968 * jv-valprint.c (java_val_print): Update call.
969 * m2-valprint.c (print_function_pointer_address, m2_val_print):
971 * p-valprint.c (pascal_val_print): Update call.
973 * disasm.c (gdb_disassemble_info): Install architecture into
974 di.application_data field.
976 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
978 * disasm.h (gdb_disassembly): Add GDBARCH parameter.
979 (gdb_print_insn): Likewise.
980 * disasm.c (dump_insns): Add GDBARCH parameter. Use it instead
982 (do_mixed_source_and_assembly): Add GDBARCH parameter. Pass to
984 (do_assembly_only): Likewise.
985 (gdb_disassembly): Add GDBARCH parameter. Use it instead of
986 current_gdbarch. Pass to subroutines.
987 (gdb_print_insn): Add GDBARCH parameter. Use it instead of
990 * stack.c (struct gdb_disassembly_stub_args): Add GDBARCH member.
991 (gdb_disassembly_stub): Pass architecture to gdb_disassembly.
992 (do_gdb_disassembly): Add GDBARCH argument. Store into args.
993 (print_frame_info): Pass architecture to do_gdb_disassembly.
995 * printcmd.c (print_formatted): Pass architecture to gdb_print_insn.
997 * mi/mi-cmd-disas.c: Include "arch-utils.h"
998 (mi_cmd_disassemble): Pass architecture to gdb_disassembly.
1000 * cli/cli-cmds.c: Include "arch-utils.h".
1001 (print_disassembly): Add GDBARCH parameter. Pass to gdb_disassembly
1002 and tui_show_assembly.
1003 (disassemble_current_function): Pass architecture to
1004 tui_get_low_disassembly_address and print_disassembly.
1005 (disassemble_command): Pass architecture to
1006 tui_get_low_disassembly_address and print_disassembly.
1008 * tui/tui.c (tui_show_assembly): Add GDBARCH parameter. Pass to
1009 tui_update_source_windows_with_addr.
1011 * tui/tui-data.h (struct tui_locator_element): Add GDBARCH member.
1012 (struct tui_source_info): Likewise.
1013 * tui/tui-data.c (tui_clear_win_detail): Clear source_info.gdbarch.
1015 * tui/tui-disasm.c (tui_disassemble): Add GDBARCH parameter.
1016 Pass to gdb_print_insn.
1017 (tui_find_disassembly_address): Add GDBARCH parameter. Pass to
1019 (tui_set_disassem_content): Add GDBARCH parameter. Install into
1020 source_info.gdbarch. Pass to tui_disassemble.
1021 (tui_show_disassem): Add GDBARCH parameter. Pass to
1022 tui_update_source_window.
1023 (tui_show_disassem_and_update_source): Add GDBARCH parameter. Pass to
1024 tui_show_disassem and tui_update_source_window.
1026 (tui_get_begin_asm_address): Return locator architecture in addition
1027 to locator PC value.
1029 (tui_get_low_disassembly_address): Add GDBARCH parameter. Pass to
1030 tui_get_low_disassembly_address.
1032 (tui_vertical_disassem_scroll): Pass architecture to subroutines.
1034 * tui/tui-disasm.h (tui_set_disassem_content): Add GDBARCH parameter.
1035 (tui_show_disassem): Likewise.
1036 (tui_show_disassem_and_update_source): Likewise.
1037 (tui_get_begin_asm_address): Return architecture and PC value.
1039 * tui/tui.h (tui_get_low_disassembly_address): Add GDBARCH parameter.
1040 (tui_show_assembly): Add GDBARCH parameter.
1042 * tui/tui-layout.c (extract_display_start_addr): Return current window
1043 architecture in addition to current PC value.
1045 (tui_set_layout): Update calls to tui_get_low_disassembly_address and
1046 extract_display_start_addr. Pass architecture to
1047 tui_update_source_windows_with_addr.
1049 * tui/tui-source.c: Include "objfiles.h".
1050 (tui_set_source_content): Initialize window architecture.
1051 (tui_show_symtab_source): Add GDBARCH parameter. Pass to
1052 tui_update_source_window_as_is
1054 * tui/tui-source.h (tui_show_symtab_source): Add GDBARCH parameter.
1056 * tui/tui-stack.c (tui_set_locator_info): Add GDBARCH parameter.
1057 Install locator architecture.
1058 (tui_set_locator_filename): Update call.
1059 (tui_show_frame_info): Pass architecture to tui_set_locator_info
1062 * tui/tui-win.c (make_visible_with_new_height): Pass architecture
1063 to tui_update_source_window.
1065 * tui/tui-winsource.c: Include "objfiles.h".
1066 (tui_display_main): Update call to tui_get_begin_asm_address.
1067 Pass architecture to tui_update_source_windows_with_addr.
1068 (tui_update_source_window): Add GDBARCH parameter. Pass to
1069 tui_update_source_window_as_is.
1070 (tui_update_source_window_as_is): Add GDBARCH parameter.
1071 Pass to tui_set_disassem_content.
1072 (tui_update_source_windows_with_addr): Add GDBARCH parameter.
1073 Pass to subroutines.
1074 (tui_update_source_windows_with_line): Pass objfile architecture
1076 (tui_horizontal_source_scroll): Pass architecture to
1077 tui_update_source_window_as_is.
1079 * tui/tui-winsource.h (tui_update_source_window): Add GDBARCH
1081 (tui_update_source_window_as_is): Likewise.
1082 (tui_update_source_windows_with_addr): Likewise.
1084 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
1086 * breakpoint.h (struct breakpoint): New member GDBARCH.
1087 * breakpoint.c: Include "arch-utils.h".
1088 (set_raw_breakpoint_without_location): Add GDBARCH parameter.
1089 Use it to set breakpoint architecture.
1090 (set_raw_breakpoint): Add GDBARCH parameter.
1091 (create_internal_breakpoint): Likewise.
1092 (create_catchpoint): Likewise.
1093 (create_fork_vfork_event_catchpoint): Likewise.
1094 (create_breakpoint): Likewise.
1095 (create_breakpoints): Likewise.
1096 (break_command_really): Likewise.
1097 (create_ada_exception_breakpoint): Likewise.
1098 Update local callers to pass architecture:
1099 (create_internal_breakpoint): Update.
1100 (create_overlay_event_breakpoint): Update.
1101 (create_longjmp_master_breakpoint): Update.
1102 (create_thread_event_breakpoint): Update.
1103 (create_solib_event_breakpoint): Update.
1104 (create_catchpoint): Update.
1105 (create_fork_vfork_event_catchpoint): Update.
1106 (set_momentary_breakpoint): Update.
1107 (clone_momentary_breakpoint): Update.
1108 (create_breakpoint): Update.
1109 (create_breakpoints): Update.
1110 (break_command_really): Update.
1111 (break_command_1): Update.
1112 (set_breakpoint): Update.
1113 (watch_command_1): Update.
1114 (catch_fork_command_1): Update.
1115 (catch_exec_commnd_1): Update.
1116 (handle_gnu_v3_exceptions): Update.
1117 (create_ada_exception_breakpoint): Update.
1118 (catch_ada_exception_command): Update.
1119 (catch_assert_command): Update.
1120 (trace_command): Update.
1122 * breakpoint.h (struct bp_location): New member GDBARCH.
1123 * breakpoint.c (get_sal_arch): New function.
1124 (set_raw_breakpoint): Set location architecture.
1125 (add_location_to_breakpoint): Likewise.
1126 (clone_momentary_breakpoint): Likewise.
1127 (watch_command_1): Likewise.
1128 (update_watchpoint): Likewise.
1129 (bp_loc_is_permanent): Use location architecture instead of
1131 (adjust_breakpoint_address): Add GDBARCH parameter; use it
1132 instead of current_gdbarch.
1133 Update callers of adjust_breakpoint_address to pass
1134 breakpoint location architecture:
1135 (set_raw_breakpoint): Update.
1136 (watch_command_1): Update.
1138 * tracepoint.c: (collect_symbol): Add GDBARCH parameter, use instead
1140 (add_local_symbols): Add GDBARCH parameter. Pass to collect_symbol.
1141 (encode_actions): Pass tracepoint architecture to add_local_symbols
1142 (encode_actions): Use tracepoint architecture instead of
1143 current_gdbarch. Pass it to add_local_symbols and collect_symbol.
1145 * breakpoint.h (struct breakpoint_ops): Replace last_addr parameter
1146 of print_one callback with last_loc.
1147 * breakpoint.c (print_one_breakpoint_location): Replace last_addr
1148 parameter with last_loc.
1149 (print_one_breakpoint): Likewise.
1150 (do_captured_breakpoint_query): Update call.
1151 (breakpoint_1): Pass last_loc instead of last_addr to
1152 print_one_breakpoint. Pass last location architecture instead of
1153 current_gdbarch to set_next_address.
1154 Update all implementations of the print_one callback:
1155 * breakpoint.c (print_one_catch_fork): Update.
1156 (print_one_catch_vfork): Update.
1157 (print_one_catch_exec): Update.
1158 (print_one_exception_catchpoint): Update.
1159 * ada-lang.c (print_one_exception): Update.
1160 (print_one_catch_exception): Update.
1161 (print_one_catch_exception_unhandled): Update.
1162 (print_one_catch_assert): Update.
1164 * breakpoint.c (print_one_breakpoint_location): Add PRINT_ADDRESS_BITS
1165 parameter. Use it instead of gdbarch_addr_bit (current_gdbarch).
1166 (print_one_breakpoint): Add PRINT_ADDRESS_BITS parameter and pass it
1167 to print_one_breakpoint_location.
1168 (breakpoint_address_bits): New function.
1169 (do_captured_breakpoint_query): Compute number of address bits to print
1170 and pass it to print_one_breakpoint.
1171 (breakpoint_1): Likewise. Use it instead of current_gdbarch.
1173 * breakpoint.h (create_thread_event_breakpoint): Add GDBARCH.
1174 * breakpoint.c (create_thread_event_breakpoint): Likewise.
1175 Update callers to create_thread_event_breakpoint:
1176 * aix-thread.c (pd_enable): Update.
1177 * linux-thread-db.c (enable_thread_event): Update.
1179 * breakpoint.h (create_solib_event_breakpoint): Add GDBARCH.
1180 * breakpoint.c (create_solib_event_breakpoint): Likewise.
1181 Update callers to create_solib_event_breakpoint:
1182 * solib-frv.c (enable_break, enable_break2): Update.
1183 * solib-pa64.c (pa64_solib_create_inferior_hook): Update.
1184 * solib-som.c (som_solib_create_inferior_hook): Update.
1185 * solib-darwin.c (darwin_solib_create_inferior_hook): Update.
1186 * solib-svr4.c (enable_break): Update.
1188 * breakpoint.h (insert_single_step_breakpoint): Add GDBARCH.
1189 * breakpoint.c (insert_single_step_breakpoint): Likewise.
1190 Update callers to insert_single_step_breakpoint:
1191 * alpha-tdep.c (alpha_software_single_step): Update.
1192 * arm-linux-tdep.c (arm_linux_software_single_step): Update.
1193 * arm-tdep.c (arm_software_single_step): Update.
1194 * cris-tdep.c (cris_software_single_step): Update.
1195 * rs6000-aix-tdep.c (rs6000_software_single_step): Update.
1196 * rs6000-tdep.c (ppc_deal_with_atomic_sequence): Update.
1197 * sparc-tdep.c (sparc_software_single_step): Update.
1198 * spu-tdep.c (spu_software_single_step): Update.
1199 * mips-tdep.c (deal_with_atomic_sequence): Add GDBARCH parameter.
1200 Pass it to insert_single_step_breakpoint.
1201 (mips_software_single_step): Pass architecture to
1202 deal_with_atomic_sequence and insert_single_step_breakpoint.
1204 * breakpoint.h (deprecated_insert_raw_breakpoint): Add GDBARCH.
1205 (deprecated_remove_raw_breakpoint): Likewise.
1206 * breakpoint.c (deprecated_insert_raw_breakpoint): Add GDBARCH.
1207 (deprecated_remove_raw_breakpoint): Likewise.
1208 Update callers to deprecated_insert_raw_breakpoint and
1209 deprecated_remove_raw_breakpoint:
1210 * breakpoint.c (single_step_gdbarch): New static variable.
1211 (insert_single_step_breakpoint): Pass GDBARCH parameter to
1212 deprecated_insert_raw_breakpoint. Store it in single_step_gdbarch.
1213 (remove_single_step_breakpoints): Pass architecture stored in
1214 single_step_gdbarch to deprecated_remove_raw_breakpoint.
1215 * rs6000-nat.c (exec_one_dummy_insn): Update.
1216 * solib-irix.c (enable_break, disable_break): Update.
1217 * procfs.c (procfs_mourn_inferior): Update.
1218 (remove_dbx_link_breakpoint): Update.
1220 * breakpoint.h (set_breakpoint): Add GDBARCH parameter.
1221 (set_momentary_breakpoint, set_momentary_breakpoint_at_pc): Likewise.
1222 * breakpoint.c (set_breakpoint): Add GDBARCH parameter.
1223 (set_momentary_breakpoint, set_momentary_breakpoint_at_pc): Likewise.
1224 Update callers to set_breakpoint, set_momentary_breakpoint and
1225 set_momentary_breakpoint_at_pc:
1226 * breakpoint.c (set_momentary_breakpoint_at_pc): Update.
1227 (until_break_command): Update.
1228 * infcall.c (call_function_by_hand): Update.
1229 * infcmd.c (finish_backward, finish_forward): Update.
1230 * infrun.c (insert_step_resume_breakpoint_at_sal): Add GDBARCH
1231 parameter. Pass it to set_momentary_breakpoint.
1232 (insert_longjmp_resume_breakpoint): Add GDBARCH parameter.
1233 Pass it to set_momentary_breakpoint_at_pc.
1234 (handle_inferior_event): Update.
1235 (insert_step_resume_breakpoint_at_frame): Update.
1236 (insert_step_resume_breakpoint_at_caller): Update..
1237 * mi/mi-cmd-break.c: Include "arch-utils.h".
1238 (mi_cmd_break_insert): Update.
1240 * target.h (struct target_ops): Add GDBARCH parameter to
1241 to_insert_breakpoint, to_remove_breakpoint, to_insert_hw_breakpoint,
1242 and to_remove_hw_breakpoint members.
1243 (target_insert_breakpoint, target_remove_breakpoint,
1244 target_insert_hw_breakpoint, target_remove_hw_breakpoint): Add GDBARCH
1245 parameter, pass to target routine.
1246 (memory_remove_breakpoint, memory_insert_breakpoint): Add GDBARCH
1248 * target.c (debug_to_insert_breakpoint, debug_to_remove_breakpoint,
1249 debug_to_insert_hw_breakpoint, debug_to_remove_hw_breakpoint): Add
1250 GDBARCH parameter, pass to target routine.
1251 (update_current_target): Update function signature.
1252 * breakpoint.c (insert_bp_location, remove_breakpoint,
1253 deprecated_insert_raw_breakpoint, deprecated_remove_raw_breakpoint):
1254 Pass architecture to target_ routines.
1255 Update all implementations of the target breakpoint routines to take
1256 GDBARCH parameter and use it instead of GDBARCH as appropriate:
1257 * corelow.c (ignore): Update.
1258 * exec.c (ignore): Update.
1259 * mem-break.c (memory_insert_breakpoint): Update.
1260 (memory_remove_breakpoint): Update.
1261 * monitor.c (monitor_insert_breakpoint): Update.
1262 (monitor_remove_breakpoint): Update.
1263 * record.c (record_insert_breakpoint): Update.
1264 (record_beneath_to_insert_breakpoint): Update.
1265 (record_remove_breakpoint): Update.
1266 (record_beneath_to_remove_breakpoint): Update.
1267 * remote.c (remote_insert_breakpoint): Update.
1268 (remote_remove_breakpoint): Update.
1269 (remote_insert_hw_breakpoint): Update.
1270 (remote_remove_hw_breakpoint): Update.
1271 * remote-m32r-sdi.c (m32r_insert_breakpoint): Update.
1272 (m32r_remove_breakpoint): Update.
1273 * remote-mips.c (mips_insert_breakpoint): Update.
1274 (mips_remove_breakpoint): Update.
1275 * i386-nat.c (i386_insert_hw_breakpoint): Update.
1276 (i386_remove_hw_breakpoint): Update.
1277 * nto-procfs.c (procfs_insert_breakpoint): Update.
1278 (procfs_remove_breakpoint): Update.
1279 (procfs_insert_hw_breakpoint): Update.
1280 (procfs_remove_hw_breakpoint): Update.
1282 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
1284 * frame.h (frame_unwind_arch): New.
1285 (frame_unwind_caller_arch): Likewise.
1286 * frame-unwind.h (frame_prev_arch_ftype): New type.
1287 (struct frame_unwind): New member prev_arch.
1288 * frame.c (struct frame_info): New member prev_arch.
1289 (frame_unwind_arch): New function.
1290 (frame_unwind_caller_arch): Likewise..
1291 (get_frame_arch): Reimplement in terms of frame_unwind_arch.
1292 * sentinel-frame.c (sentinel_frame_prev_arch): New function.
1293 (sentinel_frame_unwinder): Install it.
1295 * frame.c (frame_pc_unwind): Use frame_unwind_arch instead
1297 (frame_unwind_register_value): Likewise.
1298 (frame_unwind_register_signed): Likewise.
1299 (frame_unwind_register_unsigned): Likewise.
1300 * frame-unwind.c (frame_unwind_got_optimized): Likewise.
1301 (frame_unwind_got_register): Likewise.
1302 (frame_unwind_got_constant): Likewise.
1303 (frame_unwind_got_bytes): Likewise.
1304 (frame_unwind_got_address): Likewise.
1306 * frame.h (enum frame_type): New value ARCH_FRAME.
1307 * frame.c (fprint_frame_type): Handle ARCH_FRAME.
1308 * stack.c (print_frame_info): Likewise.
1310 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
1312 * target.h (struct target_ops): New member to_thread_architecture.
1313 (target_thread_architecture): New macro.
1314 * target.c (update_current_target): Inherit to_thread_architecture.
1315 (default_thread_architecture): New function.
1316 (debug_to_thread_architecture): New function.
1317 (setup_target_debug): Handle to_thread_architecture.
1319 * regcache.h (get_thread_arch_regcache): New.
1320 * regcache.c (struct regcache_list): New data type.
1321 (current_regcache): Hold regcache list instead of single regcache.
1322 (current_thread_ptid, current_thread_arch): New static variables.
1323 (get_thread_arch_regcache): New function.
1324 (get_thread_regcache): Use it. Call target_thread_architecture.
1325 (regcache_thread_ptid_changed): Update to current_regcache changes.
1326 (registers_changed): Likewise. Reset current_thread_arch and
1327 current_thread_ptid.
1329 * remote.c (remote_wait): Access target registers in target_gdbarch.
1330 * linux-nat.c (linux_nat_do_thread_registers): Likewise.
1331 * proc-service.c (ps_lgetregs, ps_lsetregs): Likewise.
1332 (ps_lgetfpregs, ps_lsetfpregs): Likewise.
1333 * sol-thread.c (ps_lgetregs, ps_lsetregs): Likewise.
1334 (ps_lgetfpregs, ps_lsetfpregs): Likewise.
1335 * solib-svr4.c (enable_break): Likewise.
1336 (svr4_relocate_main_executable): Likewise.
1338 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
1340 * python/python-internal.h (struct language_defn): Declare.
1341 (python_gdbarch, python_language): Likewise.
1342 (ensure_python_env): Add prototype.
1343 (make_cleanup_py_restore_gil): Remove prototype.
1345 * python/python.c: Include "arch-utils.h", "value.h" and "language.h".
1346 (python_gdbarch, python_language): New global variables.
1347 (struct python_env): New data type.
1348 (ensure_python_env, restore_python_env): New functions.
1349 (eval_python_from_control_command): Call ensure_python_env to
1350 install current architecture and language.
1351 (python_command, gdbpy_new_objfile): Likewise.
1352 * python/python-cmd.c: Include "arch-utils.h" and "language.h".
1353 (cmdpy_destroyer, cmdpy_function, cmdpy_completer): Call
1355 * python/python-type.c (clean_up_objfile_types): Likewise.
1356 * python/python-objfile.c: Include "language.h".
1357 (clean_up_objfile): Call ensure_python_env.
1358 * python/python-prettyprint.c (apply_val_pretty_printer): Likewise.
1359 (apply_varobj_pretty_printer): Do not call PyGILState_Ensure.
1360 * varobj.c (varobj_ensure_python_env): New helper function.
1361 (varobj_get_display_hint, update_dynamic_varobj_children,
1362 install_default_visualizer, varobj_set_visualizer, free_variable,
1363 value_get_print_value): Call it.
1364 (value_get_print_value): Add varobj argument instead of pretty
1365 printer argument. Update all callers.
1367 * python/python-utils.c (py_gil_restore, make_cleanup_py_restore_gil):
1370 * value.h (internal_function_fn): Add GDBARCH and LANGUAGE argument.
1371 (call_internal_function): Likewise.
1372 * value.c (call_internal_function): Likewise. Pass to handler.
1373 * eval.c (evaluate_subexp_standard): Update call.
1374 * python/python-function.c: Include "language.h".
1375 (fnpy_call): Add GDBARCH and LANGAUAGE arguments and call
1376 make_cleanup_python_env.
1378 * python/python-value.c (builtin_type_pyint, builtin_type_pyfloat,
1379 builtin_type_pylong, builtin_type_pybool, builtin_type_pychar,
1380 valpy_str): Use python_gdbarch and python_language instead of
1381 current_gdbarch and current_language.
1382 * python/python-type.c (typy_lookup_typename): Likewise.
1384 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
1386 * arch-utils.c (selected_byte_order): Return target_byte_order_user.
1387 (show_endian): Use target_byte_order_user if specified; otherwise
1388 use get_current_arch () instead of current_gdbarch.
1389 (show_architecture): Use set_architecture_string if specified;
1390 otherwise use get_current_arch () instead of current_gdbarch.
1391 (get_current_arch): New function.
1392 * arch-utils.h (get_current_arch): Add prototype.
1394 * osabi.c (show_osabi): Use get_current_arch () instead of
1397 * findcmd.c: Include "arch-utils.h".
1398 (parse_find_args): Add BIG_P argument. Use it instead of byte order
1400 (find_command): Use get_current_arch () instead of current_gdbarch.
1401 Pass byte order to parse_find_args.
1403 * maint.c: Include "arch-utils.h".
1404 (maintenance_print_architecture): Use get_current_arch () instead
1407 * reggroups.c: Include "arch-utils.h".
1408 (maintenance_print_reggroups): Use get_current_arch () instead
1411 * symfile.c: Include "arch-utils.h".
1412 (overlay_load_command): Use get_current_arch () instead of
1415 * value.c: Include "arch-utils.h".
1416 (show_convenience): Use get_current_arch () instead of
1419 * tui/tui-regs.c: Include "arch-utils.h".
1420 (tui_reg_next_command): Use get_current_arch () instead of
1423 * mi/mi-main.c: Include "arch-utils.h".
1424 (mi_cmd_data_read_memory): Use get_current_arch () instead of
1427 * parse.c: Include "arch-utils.h".
1428 (parse_exp_in_context): Use get_current_arch () instead of
1431 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
1433 * gdbtypes.c (make_pointer_type, make_reference_type,
1434 smash_to_memberptr_type, lookup_array_range_type, check_stub_method):
1435 Use type architecture instead of current_gdbarch.
1437 * gdbtypes.h (address_space_name_to_int, address_space_int_to_name):
1438 Add GDBARCH paramter.
1439 * gdbtypes.c (address_space_name_to_int, address_space_int_to_name):
1440 Add GDBARCH parameter. Use it instead of current_gdbarch.
1441 * c-typeprint.c (c_type_print_modifier): Update call.
1442 * parse.c (push_type_address_space): Likewise.
1444 * findvar.c (extract_typed_address, store_typed_address): Use type
1445 architecture instead of current_gdbarch.
1447 * value.c (value_as_address, unpack_field_as_long): Use type architecture
1448 instead of current_gdbarch.
1450 * doublest.c (floatformat_from_length): Add GDBARCH argument. Use it
1451 instead of current_gdbarch.
1452 (floatformat_from_type): Pass type architecture.
1454 * infcall.c (find_function_addr): Use type architecture instead
1457 * valarith.c (value_bitstring_subscript, value_x_binop, value_neg,
1458 value_bit_index): Use type architecture instead of current_gdbarch.
1459 * valops.c (value_cast, value_slice): Likewise.
1461 * value.h (modify_field): Add TYPE argument.
1462 * value.c (modify_field): Add TYPE argument. Use type architecture
1463 instead of current_gdbarch.
1464 (set_internalvar_component): Likewise.
1465 * eval.c (evaluate_struct_tuple): Update call.
1466 * valops.c (value_assign): Likewise.
1467 * ada-lang.c (modify_general_field): Likewise. Add TYPE argument.
1468 (make_array_descriptor): Update calls.
1469 (move_bits): Add BITS_BIG_ENDIAN_P argument. Use it instead of
1471 (ada_value_assign, value_assign_to_component): Update calls.
1472 (decode_packed_array, ada_value_primitive_packed_val, ada_value_assign,
1473 value_assign_to_component): Use type arch instead of current_gdbarch.
1475 * printcmd.c (float_type_from_length): Remove GDBARCH argument,
1476 use type architecture instead.
1477 (print_scalar_formatted, printf_command): Update calls. Use type
1478 architecture instead of current_gdbarch.
1479 * valprint.c (val_print_type_code_int): Use type architecture
1480 instead of current_gdbarch.
1481 * varobj.c (value_get_print_value): Likewise.
1482 * python/python-prettyprint.c (print_string_repr): Add GDBARCH
1483 argument. Use it instead of current_gdbarch.
1484 (apply_val_pretty_printer): Update call.
1486 * ada-valprint.c (ada_val_print_1): Use type architecture instead
1488 * c-valprint.c (print_function_pointer_address): Add GDBARCH argument.
1489 Use it instead of current_gdbarch.
1490 (c_val_print): Update calls passing type architecture.
1491 * f-valprint.c (f_val_print): Use type architecture instead of
1493 * jv-valprint (java_value_print): Likewise.
1494 * m2-valprint.c (print_function_pointer_address): Add GDBARCH argument.
1495 Use it instead of current_gdbarch.
1496 (print_unpacked_pointer): Update calls passing type architecture.
1497 * scm-valprint.c (scm_scmval_print): Use type architecture instead of
1500 * gnu-v3-abi.c (get_class_arch): Remove.
1501 (gnuv3_rtti_type): Use get_type_arch instead of get_class_arch. Remove
1502 special-case check for Java classes.
1503 (gnuv3_virtual_fn_field, gnuv3_baseclass_offset, gnuv3_print_method_ptr,
1504 gnuv3_method_ptr_size, gnuv3_make_method_ptr, gnuv3_method_ptr_to_value):
1505 Use get_type_arch instead of get_class_arch.
1507 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
1509 * gdbtypes.h (TYPE_OBJFILE_OWNED, TYPE_OWNER): New macros.
1510 (TYPE_OBJFILE, TYPE_ALLOC, TYPE_ZALLOC): Reimplement.
1511 (alloc_type_arch): Add prototype.
1512 (alloc_type_copy): Likewise.
1513 (get_type_arch): Likewise.
1514 (arch_type): Likewise.
1515 (arch_integer_type): Likewise.
1516 (arch_character_type): Likewise.
1517 (arch_boolean_type): Likewise.
1518 (init_float_type): Remove, replace by ...
1519 (arch_float_type): ... this.
1520 (init_complex_type): Remove, replace by ...
1521 (arch_complex_type): ... this.
1522 (init_flags_type): Remove, replace by ...
1523 (arch_flags_type): ... this.
1524 (init_composite_type): Remove, replace by ...
1525 (arch_composite_type): ... this.
1527 * gdbtypes.c (alloc_type): No longer support NULL objfile.
1528 (init_type): Likewise.
1529 (alloc_type_arch): New function.
1530 (alloc_type_copy): New function.
1531 (get_type_arch): New function.
1533 (smash_type): Preserve type ownership information.
1534 (make_pointer_type, make_reference_type, make_function_type,
1535 smash_to_memberptr_type, smash_to_method_type): No longer
1536 preserve OBJFILE across smash_type calls.
1537 (make_pointer_type, make_reference_type, make_function_type,
1538 lookup_memberptr_type, lookup_methodptr_type, allocate_stub_method,
1539 create_range_type, create_array_type, create_set_type, copy_type):
1540 Use alloc_type_copy when allocating types.
1541 (check_typedef): Use alloc_type_arch.
1542 (copy_type_recursive): Likewise. Preserve type ownership data
1544 (recursive_dump_type): Dump type ownership data.
1545 (alloc_type_instance): Update type ownership check.
1546 (copy_type, copy_type_recursive): Likewise.
1548 (arch_type): New function.
1549 (arch_integer_type): Likewise.
1550 (arch_character_type): Likewise.
1551 (arch_boolean_type): Likewise.
1552 (init_float_type): Remove, replace by ...
1553 (arch_float_type): ... this.
1554 (init_complex_type): Remove, replace by ...
1555 (arch_complex_type): ... this.
1556 (init_flags_type): Remove, replace by ...
1557 (arch_flags_type): ... this.
1558 (append_flags_type_flag): Move down.
1559 (init_composite_type): Remove, replace by ...
1560 (arch_composite_type): ... this.
1561 (append_composite_type_field_aligned,
1562 append_composite_type_field): Move down.
1564 * gdbarch.c (gdbtypes_post_init): Allocate all types
1565 using per-architecture routines.
1566 * ada-lang.c (ada_language_arch_info): Likewise.
1567 * f-lang.c (build_fortran_types): Likewise.
1568 * jv-lang.c (build_java_types): Likewise.
1569 * m2-lang.c (build_m2_types): Likewise.
1570 * scm-lang.c (build_scm_types): Likewise.
1572 * ada-lang.c (ada_type_of_array): Use alloc_type_copy.
1573 (packed_array_type): Likewise.
1574 (ada_template_to_fixed_record_type_1): Likewise.
1575 (template_to_static_fixed_type): Likewise.
1576 (to_record_with_fixed_variant_part): Likewise.
1577 (to_fixed_variant_branch_type): Likewise.
1578 (to_fixed_array_type): Likewise.
1579 (to_fixed_range_type): Likewise.
1580 (empty_record): Use type instead of objfile argument.
1581 Use alloc_type_copy.
1582 (to_fixed_variant_branch_type): Update call to empty_record.
1583 * jv-lang.c (type_from_class): Use alloc_type_arch.
1585 * arm-tdep.c (arm_ext_type): Allocate per-architecture type.
1586 * i386-tdep.c (i386_eflags_type, i386_mxcsr_type, i387_ext_type,
1587 i386_mmx_type, i386_sse_type): Likewise.
1588 * ia64-tdep.c (ia64_ext_type): Likewise.
1589 * m32c-tdep.c (make_types): Likewise.
1590 * m68k-tdep.c (m68k_ps_type, m68881_ext_type): Likewise.
1591 * rs6000-tdep.c (rs6000_builtin_type_vec64,
1592 rs6000_builtin_type_vec128): Likewise.
1593 * sparc-tdep.c (sparc_psr_type, sparc_fsr_type): Likewise.
1594 * sparc64-tdep.c (sparc64_pstate_type, sparc64_fsr_type,
1595 sparc64_fprs_type): Likewise.
1596 * spu-tdep.c (spu_builtin_type_vec128): Likewise.
1597 * xtensa-tdep.c (xtensa_register_type): Likewise.
1598 * linux-tdep.c (linux_get_siginfo_type): Likewise.
1599 * target-descriptions.c (tdesc_gdb_type): Likewise.
1600 * gnu-v3-abi.c (build_gdb_vtable_type): Likewise.
1602 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
1604 * i386-tdep.h (struct gdbarch_tdep): Add i386_eflags_type and
1605 i386_mxcsr_type members.
1606 (i386_eflags_type): Make into function.
1607 (i386_mxcsr_type): Likewise.
1608 * i386-tdep.c (i386_eflags_type): Make into function.
1609 (i386_mxcsr_type): Likewise.
1610 (i386_register_type): Update uses.
1611 (i386_init_types): Remove.
1612 (_initialize_i386_tdep): Do not call it.
1613 * amd64-tdep.c (amd64_register_type): Update uses.
1615 * m68k-tdep.h (struct gdbarch_tdep): Add m68k_ps_type member.
1616 * m68k-tdep.c (m68k_ps_type): Make into function.
1617 (m68k_register_type): Update use.
1618 (m68k_init_types): Remove.
1619 (_initialize_m68k_tdep): Do not call it.
1621 * sparc-tdep.h (struct gdbarch_tdep): Add sparc_psr_type,
1622 sparc_fsr_type, sparc64_pstate_type, sparc64_fsr_type, and
1623 sparc64_fprs_type members.
1624 * sparc-tdep.c (sparc_psr_type): Make into function.
1625 (sparc_fsr_type): Likewise.
1626 (sparc32_register_type): Update uses.
1627 (sparc_init_types): Remove.
1628 (_initialize_sparc_tdep): Do not call it.
1629 * sparc64-tdep.c (sparc64_pstate_type): Make into function.
1630 (sparc64_fsr_type): Likewise.
1631 (sparc64_fprs_type): Likewise.
1632 (sparc64_register_type): Update uses.
1633 (sparc64_init_types): Remove.
1634 (_initialize_sparc64_tdep): Likewise.
1636 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
1638 * gdbtypes.h (builtin_type_ieee_single, builtin_type_ieee_double,
1639 builtin_type_i387_ext, builtin_type_m68881_ext, builtin_type_arm_ext,
1640 builtin_type_ia64_spill, builtin_type_ia64_quad): Remove.
1641 (init_float_type, init_complex_type): Add prototypes.
1642 * gdbtypes.c (builtin_type_ieee_single, builtin_type_ieee_double,
1643 builtin_type_i387_ext, builtin_type_m68881_ext, builtin_type_arm_ext,
1644 builtin_type_ia64_spill, builtin_type_ia64_quad): Remove.
1645 (_initialize_gdbtypes): Do not initialize them.
1646 (build_flt): Rename to ...
1647 (init_float_type): ... this. Make global.
1648 (build_complex): Rename to ...
1649 (init_complex_type): ... this. Make global. Remove BIT argument.
1650 (gdbtypes_post_init): Update calls.
1652 * ada-lang.c (ada_language_arch_info): Use init_float_type.
1653 * jv-lang.c (build_java_types): Likewise.
1654 * m2-lang.c (build_m2_types): Likewise.
1655 * f-lang.c (build_fortran_types): Use init_float_type and
1658 * target-descriptions.c (tdesc_gdb_type): Call init_float_type instead
1659 of using builtin_type_ieee_single, builtin_type_ieee_double, or
1660 builtin_type_arm_ext.
1662 * ia64-tdep.h (struct gdbarch_tdep): Add ia64_ext_type member.
1663 * ia64-tdep.c (builtin_type_ia64_ext): Remove.
1664 (_initialize_ia64_tdep): Do not initialize it.
1665 (floatformat_valid, floatformat_ia64_ext, floatformats_ia64_ext):
1667 (ia64_ext_type): New function.
1668 (ia64_register_reggroup_p, ia64_convert_register_p,
1669 ia64_register_to_value, ia64_value_to_register,
1670 ia64_extract_return_value, ia64_store_return_value): Use ia64_ext_type
1671 instead of builtin_type_ia64_ext.
1673 * i386-tdep.h (struct gdbarch_tdep): Add i387_ext_type member.
1674 (i387_ext_type): Add prototype.
1675 * i386-tdep.c (i387_ext_type): New function.
1676 (i386_extract_return_value, i386_store_return_value,
1677 i386_register_type): Use it instead of builtin_type_i387_ext.
1678 * amd64-tdep.c (amd64_register_type): Likewise.
1679 * i387-tdep.c (print_i387_value, i387_register_to_value,
1680 i387_value_to_register): Likewise.
1681 (print_i387_value, print_i387_ext): Add GDBARCH argument.
1682 (print_i387_ext, i387_print_float_info): Pass to subroutines.
1684 * m68k-tdep.h (struct gdbarch_tdep): Add m68881_ext_type member.
1685 * m68k-tdep.c (m68881_ext_type): New function.
1686 (m68k_register_type, m68k_convert_register_p): Use it instead
1687 of builtin_type_m68881_ext.
1689 * arm-tdep.h (struct gdbarch_tdep): Add arm_ext_type member.
1690 * arm-tdep.c (arm_ext_type): New function.
1691 (arm_register_type): Use it instead of builtin_type_arm_ext.
1693 * alpha-tdep.c (alpha_register_type): Use builtin types
1694 instead of builtin_type_ieee_double.
1696 * mips-tdep.c (mips_float_register_type, mips_double_register_type):
1698 (mips_register_type): Use builtin types instead of
1699 builtin_type_ieee_single and builtin_type_ieee_double.
1700 (mips_print_fp_register): Use builtin types instead of
1701 mips_float_register_type and mips_double_register_type.
1703 * hppa-tdep.c (hppa32_register_type, hppa64_register_type):
1704 Use builtin types instead of builtin_type_ieee_single and
1705 builtin_type_ieee_double.
1707 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
1709 * gdbtypes.h (builtin_type_int0, builtin_type_int8, builtin_type_uint8,
1710 builtin_type_int16, builtin_type_uint16, builtin_type_int32,
1711 builtin_type_uint32, builtin_type_int64, builtin_type_uint64,
1712 builtin_type_int128, builtin_type_uint128): Remove.
1713 (struct builtin_type): New members builtin_int0, builtin_int8,
1714 builtin_uint8, builtin_int16, builtin_uint16, builtin_int32,
1715 builtin_uint32, builtin_int64, builtin_uint64, builtin_int128,
1716 and builtin_uint128.
1717 * gdbtypes.c (builtin_type_int0, builtin_type_int8, builtin_type_uint8,
1718 builtin_type_int16, builtin_type_uint16, builtin_type_int32,
1719 builtin_type_uint32, builtin_type_int64, builtin_type_uint64,
1720 builtin_type_int128, builtin_type_uint128): Remove.
1721 (_initialize_gdbtypes): Do not initialize them.
1722 (gdbtypes_post_init): Initialize fixed-size integer types.
1724 * dwarf2expr.c (unsigned_address_type, signed_address_type): Add
1725 GDBARCH argument. Return platform-specific type.
1726 (dwarf2_read_address, execute_stack_op): Update calls.
1728 * target-descriptions.c (tdesc_gdb_type): Use platform-specific types
1729 instead of global builtin_int_... variables.
1730 * mi/mi-main.c (mi_cmd_data_read_memory): Likewise.
1731 * printcmd.c (do_examine): Likewise.
1732 * jv-exp.y (parse_number): Likewise.
1734 * alpha-tdep.c (alpha_register_type, alpha_push_dummy_call,
1735 alpha_store_return_value): Likewise.
1736 * amd64-linux-tdep.c (amd64_linux_register_type): Likewise.
1737 * amd64-tdep.c (amd64_register_type): Likewise.
1738 * arm-tdep.c (arm_register_type): Likewise.
1739 * avr-tdep.c (avr_register_type): Likewise.
1740 * cris-tdep.c (cris_register_type, crisv32_register_type): Likewise.
1741 * frv-tdep.c (frv_register_type): Likewise.
1742 * h8300-tdep.c h8300_register_type): Likewise.
1743 * hppa-tdep.c (hppa64_push_dummy_call, hppa32_register_type,
1744 hppa64_register_type): Likewise.
1745 * i386-tdep.c (i386_mmx_type, i386_sse_type): Likewise.
1746 * iq2000-tdep.c (iq2000_register_type): Likewise.
1747 * lm32-tdep.c (lm32_register_type, lm32_push_dummy_call): Likewise.
1748 * m32r-tdep.c (m32r_register_type): Likewise.
1749 * m68hc11-tdep.c (m68hc11_register_type, m68hc11_pseudo_register_read,
1750 m68hc11_pseudo_register_write): Likewise.
1751 * m68k-tdep.c (m68k_register_type): Likewise.
1752 * m88k-tdep.c (m88k_register_type, m88k_store_arguments): Likewise.
1753 * mep-tdep.c (mep_register_type): Likewise.
1754 * mips-tdep.c (mips_register_type, mips_pseudo_register_type,
1755 mips_print_fp_register): Likewise.
1756 * moxie-tdep.c (moxie_register_type): Likewise.
1757 * mt-tdep.c (mt_copro_register_type, mt_register_type): Likewise.
1758 * rs6000-tdep.c (rs6000_builtin_type_vec64,
1759 rs6000_builtin_type_vec128): Likewise.
1760 * score-tdep.c (score_register_type): Likewise.
1761 * sparc-tdep.c (sparc32_register_type, sparc32_store_arguments):
1763 * sparc64-tdep.c (sparc64_register_type, sparc64_store_arguments):
1765 * spu-tdep.c (spu_builtin_type_vec128, spu_register_type): Likewise.
1766 * v850-tdep.c (v850_register_type): Likewise.
1767 * xstormy16-tdep.c (xstormy16_register_type): Likewise.
1768 * xtensa-tdep.c (xtensa_register_type): Likewise.
1770 * mt-tdep.c (struct gdbarch_tdep): New data structure.
1771 (mt_gdbarch_init): Alloc TDEP structures.
1772 (mt_register_type): Cache coprocessor type in TDEP instead of
1773 static global variable.
1775 * xtensa-tdep.h (struct gdbarch_tdep): Add type_entries member.
1776 * xtensa-tdep.c (type_entries): Remove.
1777 (xtensa_register_type): Cache fixed-size types in TDEP instead
1778 of in global variable.
1780 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
1782 * gdbtypes.h (builtin_type_true_char): Remove.
1783 (builtin_type_true_unsigned_char): Likewise.
1784 (struct builtin_type): Add builtin_true_char and
1785 builtin_true_unsigned_char members.
1786 * gdbtypes.c (builtin_type_true_char): Remove.
1787 (builtin_type_true_unsigned_char): Likewise.
1788 (_initialize_gdbtypes): Do not initialize them.
1789 (gdbtypes_post_init): Initialize builtin_true_char and
1790 builtin_true_unsigned_char members of builtin_type.
1792 * printcmd.c (print_scalar_formatted): Use builtin_type
1793 members instead of builtin_type_true_char and
1794 builtin_type_true_unsigned_char.
1795 * ada-valprint.c (ada_val_print_1): Likewise.
1797 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
1799 * gdbtypes.h (builtin_type_void): Remove.
1800 * gdbtypes.c (builtin_type_void): Remove.
1801 (_initialize_gdbtypes): Do not initialize it.
1803 (safe_parse_type): Add GDBARCH argument. Use it to construct
1805 (check_stub_method): Update call.
1807 * infcall.c (call_function_by_hand): Use platform-specific type
1808 instead of builtin_type_void.
1809 * valops.c (value_cast): Use input void type instead of
1812 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
1814 * ada-lang.c (assign_component): Use platform-specific integer type
1815 instead of builtin_type_int32 type.
1816 (ada_evaluate_subexp) [OP_ATR_SIZE]: Likewise.
1818 * ax-gdb.c (gen_expr) [UNOP_NEG]: Use platform-specific integer type
1819 instead of builtin_type_int8 type.
1820 * valarith.c (value_x_unop): Likewise.
1821 * python/python-value.c (valpy_absolute): Avoid reference to
1822 builtin_type_int8 type.
1824 * eval.c (evaluate_subexp_standard): Use platform-specific integer
1825 type instead of builtin_type_int8 as EVAL_SKIP return value type.
1826 * ada-lang.c (ada_evaluate_subexp): Likewise.
1827 * jv-lang.c (evaluate_subexp_java): Likewise.
1828 * m2-lang.c (evaluate_subexp_modula2): Likewise.
1829 * scm-lang.c (evaluate_exp): Likewise.
1831 * value.h (value_bitstring): Add INDEX_TYPE argument.
1832 * valops.c (value_bitstring): Add INDEX_TYPE argument, use it instead
1833 of builtin_type_int32 as base range type.
1834 * eval.c (evaluate_subexp_standard): Update value_bitstring call.
1836 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
1838 * gdbtypes.c (lookup_array_range_type): Add prototype.
1839 (lookup_string_range_type): Likewise.
1840 * gdbtypes.c (lookup_array_range_type): New function.
1841 (lookup_string_range_type): Likewise.
1843 * ax-gdb.c (gen_repeat): Use lookup_array_range_type.
1844 * parse.c (follow_types): Likewise.
1845 * jv-lang.c (java_array_type): Likewise.
1846 * gnu-v3-abi.c (build_gdb_vtable_type): Likewise.
1847 * mt-tdep.c (mt_register_type): Likewise.
1848 * sh-tdep.c (sh_sh4_build_float_register_type): Likewise.
1849 * sh64-tdep.c (sh64_build_float_register_type): Likewise.
1850 * value.c (allocate_repeat_value): Likewise.
1851 * valops.c (value_array, value_cstring): Likewise.
1852 * valops.c (value_string): Use lookup_string_range_type.
1854 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
1856 * m2-typeprint.c (m2_print_bounds, m2_is_long_set_of_type): Remove
1857 redundant check for NULL TYPE_TARGET_TYPE.
1858 * m2-valprint.c (m2_print_long_set): Likewise.
1859 * p-valprint.c (pascal_type_print_base): Likewise.
1861 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
1863 * printcmd.c (next_gdbarch): New static variable.
1864 (set_next_address, do_examine, x_command): Set it.
1865 (decode_format): Use 'a' size to indicate width of an address.
1866 (do_examine): Add GDBARCH argument. Handle 'a' size.
1867 (x_command): Pass architecture to do_examine.
1868 Error if called without argument the first time.
1869 (do_one_display): Pass architecture to do_examine.
1871 (examine_i_type, examine_b_type, examine_h_type, examine_w_type,
1872 examine_g_type): Remove.
1873 (_initialize_printcmd): Do not initialize them.
1874 (do_examine): Use builin_type_int... instead of examine_..._type.
1876 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
1878 * gdbtypes.h (struct builtin_type): Add internal_fn member.
1879 * gdbtypes.c (gdbtypes_post_init): Initialize it.
1880 * value.c (internal_fn_type): Remove.
1881 (_initialize_values): Do not initialize it.
1883 * value.c (struct internalvar): Add enum internalvar_kind type and
1884 kind member. Restructure union internalvar_data type. Remove type,
1885 canonical, and make_value members.
1886 (init_if_undefined_command): Update for data structure changes.
1887 (create_internalvar): Likewise.
1888 (create_internalvar_type_lazy): Likewise.
1889 (get_internalvar_integer): Likewise.
1890 (get_internalvar_function): Likewise.
1891 (set_internalvar_component): Likewise.
1892 (set_internalvar): Likewise.
1893 (set_internalvar_integer): Likewise.
1894 (set_internalvar_function): Likewise.
1895 (clear_internalvar): Likewise.
1896 (add_internal_function): Likewise.
1897 (preserve_one_internalvar): New function.
1898 (preserve_values): Call it.
1900 * value.h (value_of_internalvar): Add GDBARCH parameter.
1901 (internalvar_make_value): Likewise.
1902 * value.c (value_of_internalvar): Add GDBARCH parameter. Pass it to
1903 make_value callback. Use it to generate per-architecture result value
1904 types for internal variables with no pre-defined type. Update for data
1906 (show_convenience): Pass architecture to value_of_internalvar.
1907 * eval.c (evaluate_subexp_standard): Likewise.
1908 * infrun.c (siginfo_make_value): Add GDBARCH parameter. Use it
1909 instead of current frame architecture. Return per-architecture type.
1911 * value.h (set_internalvar_string): Add prototype.
1912 * value.c (set_internalvar_string): New function.
1913 * tracepoint.c (set_traceframe_context): Use it.
1915 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
1917 * jv-lang.h (java_int_type, java_byte_type, java_short_type,
1918 java_long_type, java_boolean_type, java_char_type, java_float_type,
1919 java_double_type, java_void_type): Remove.
1920 (struct builtin_java_type): New data type.
1921 (builtin_java_type): Add prototype.
1922 (java_primitive_type): Add GDBARCH argument.
1923 (java_primitive_type_from_name): Likewise.
1924 (type_from_class): Likewise.
1926 * jv-lang.c (java_int_type, java_byte_type, java_short_type,
1927 java_long_type, java_boolean_type, java_char_type, java_float_type,
1928 java_double_type, java_void_type): Remove.
1930 (build_java_types, builtin_java_type): New functions.
1931 (java_type_data): New static variable.
1932 (_initialize_java_language): Initialize it. No longer initialize
1934 (java_language_arch_info): Use per-architecture types.
1936 (java_primitive_type): Add GDBARCH argument. Return per-architecture
1937 type instead of refering to global variable.
1938 (java_primitive_type_from_name): Add GDBARCH argument.
1939 (java_primitive_type_name): New function.
1940 (java_demangled_signature_length): Use it instead of
1941 java_primitive_type_from_name.
1942 (java_demangled_signature_copy): Likewise.
1944 (type_from_class): Add GDBARCH argument. Pass to java_link_class_type,
1945 java_primitive_type, and recursive type_from_class call.
1946 (java_link_class_type): Add GDBARCH argument. Pass to type_from_class
1947 calls. Use per-architecture types instead of global types.
1949 * jv-exp.y (parse_java_type): New define.
1950 Use per-architecture types instead of global types througout.
1952 * jv-valprint.c (java_value_print): Pass architecture to
1953 type_from_class and java_primitive_type_from_name. Use per-
1954 architecture types instead of global types.
1956 2009-07-01 Doug Evans <dje@google.com>
1958 * NEWS: Mention biarch amd64-linux gdbserver and hardware watchpoint
1959 support for i386-linux, amd64-linux, and i386-win32 builds of
1962 2009-07-01 Nick Roberts <nickrob@snap.net.nz>
1964 * Makefile.in (HFILES_NO_SRCDIR): Remove entries for deleted files.
1966 2009-06-30 Jan Kratochvil <jan.kratochvil@redhat.com>
1968 * Makefile.in (TARGET_FLAGS_TO_PASS): Include also FORCE_PARALLEL.
1969 (check//%): Construct FORCE_PARALLEL for the sub-make. Extend the
1972 2009-06-30 Paul Pluzhnikov <ppluzhnikov@google.com>
1975 * dwarf2-frame.c (dwarf2_frame_state): Move cfa_offset, cfa_reg,
1976 cfa_how and cfa_exp into regs and adjust users.
1978 2009-06-30 Daniel Jacobowitz <dan@codesourcery.com>
1980 * dwarf2read.c (inherit_abstract_dies): Work around GCC PR 40573.
1982 2009-06-30 Vladimir Prus <vladimir@codesourcery.com>
1984 * mi/mi-cmd-stack.c (parse_print_values): New.
1985 (mi_cmd_stack_list_locals, mi_cmd_stack_list_args): Use the above.
1987 2009-06-30 Vladimir Prus <vladimir@codesourcery.com>
1989 * varobj.c (varobj_get_type): Use type_to_string.
1991 2009-06-29 Pedro Alves <pedro@codesourcery.com>
1993 * infrun.c (handle_inferior_event): Context switch to the new
1994 thread when resuming for a new_thread_event.
1996 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
1998 * ada-lang.h (ada_convert_actual): Add GDBARCH argument.
1999 * ada-lang.c (convert_actual): Remove stale prototype.
2000 (ensure_lval, make_array_descriptor, ada_convert_actual):
2001 Add GDBARCH argument and pass through to subroutine calls.
2002 (ensure_lval): Use GDBARCH instead of current_gdbarch.
2003 * infcall.c (value_arg_coerce): Update ada_convert_actual call.
2005 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
2007 * ada-lang.c (resolve): Use per-architecture void type instead
2008 of platform-independent one.
2009 (ada_evaluate_subexp) [STRUCTOP_STRUCT]: Likewise.
2010 (ada_resolve_function): Reimplement fallback logic to avoid
2011 explicit reference to builtin_type_void.
2013 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
2015 * ada-valprint.c (ada_print_scalar): Accept NULL type argument
2016 to indicate scalar should be printed as default integer.
2017 (print_optional_low_bound): Pass NULL to ada_print_scalar to
2018 indicate default integer output.
2019 * ada-typeprint.c (print_range, print_range_bound): Likewise.
2020 (print_choices): Likewise. Thus, accept NULL as val_type.
2021 * ada-lang.c (ada_variant_discrim_type): Return NULL when failed
2022 to look up controlling discriminant name.
2024 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
2026 * ada-lang.c (to_fixed_range_type): Add ORIG_TYPE argument.
2027 Fall back to orig_type as index type if symbol lookup fails.
2028 Allocate result types from ORIG_TYPE's objfile.
2029 (ada_array_bound_from_type, to_fixed_array_type,
2030 ada_evaluate_subexp): Pass original index type to
2031 to_fixed_range_type. Do not pass objfile.
2033 * ada-typeprint.c (print_range_type_named): Add ORIG_TYPE argument.
2034 Fall back to orig_type as index type if symbol lookup fails.
2035 (print_array_type, ada_print_type): Pass original index type
2036 to print_range_type_named.
2038 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
2040 * ada-lang.c (ada_index_type): Update comment.
2042 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
2044 * ada-lang.c (ada_index_type): Make static. Add NAME argument.
2045 Throw error on invalid input arguments. Return NULL if unable
2046 to determine index type.
2048 (ada_array_bound_from_type): Remove TYPEP argument.
2049 (ada_array_bound): Make static. Return LONGEST instead of value.
2050 Update for ada_array_bound_from_type change.
2051 (ada_array_length): Return LONGEST instead of value.
2052 Update for ada_array_bound_from_type change.
2053 (make_array_descriptor): Update for ada_array_bound change.
2055 (ada_evaluate_subexp) [OP_ATR_RANGE, OP_ATR_FIRST, OP_ATR_LAST,
2056 OP_ATR_LENGTH]: Update for ada_array_bound_from_type,
2057 ada_array_bound, ada_array_length, ada_index_type changes.
2058 Always use ada_index_type to compute result type; fall back
2059 to architecture-specific integer type if ada_index_type fails.
2061 * ada-lang.h (ada_index_type): Remove prototype.
2062 (ada_array_bound): Likewise.
2064 2009-06-29 Pedro Alves <pedro@codesourcery.com>
2066 * dbxread.c (read_dbx_symtab): Clear has_line_numbers when ending
2069 2009-06-29 Tom Tromey <tromey@redhat.com>
2071 * README: Mention parallel check.
2073 2009-06-29 Sami Wagiaalla <swagiaal@redhat.com>
2075 * dwarf2read.c (read_import_statement): Properly set import location
2077 * cp-support.h (cp_add_using, cp_add_using_directive): Now take char*
2078 inner, char* outer arguments. Updated callers.
2080 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
2082 * value.h (value_subscript, value_subscripted_rvalue,
2083 value_bitstring_subscript, value_ptradd): Use LONGEST instead
2084 of value as type of the index argument.
2085 (value_ptrsub): Remove.
2086 * valarith.c (value_subscript, value_subscripted_rvalue,
2087 value_bitstring_subscript, value_ptradd): Use LONGEST instead
2088 of value as type of the index argument.
2089 (value_ptrsub): Remove.
2091 * wrapper.h (gdb_value_subscript): Use LONGEST instead of
2092 value as type of the index argument.
2093 * wrapper.c (gdb_value_subscript): Likewise.
2095 Update calls to gdb_value_subscript, value_subscript,
2096 value_subscripted_rvalue, value_bitstring_subscript and
2097 value_ptradd to use LONGEST instead of value as index
2098 argument type. Use value_ptradd instead of value_ptrsub.
2099 * ada-lang.c (ada_value_subscript, ada_value_ptr_subscript,
2100 ada_tag_name_2): Update.
2101 * ada-tasks.c (read_atcb): Update.
2102 * eval.c (evaluate_subexp_standard): Update.
2103 * valarith.c (value_subscript): Update.
2104 * gnu-v2-abi.c (gnuv2_virtual_fn_field): Update.
2105 * gnu-v3-abi.c (gnuv3_get_virtual_fn, gnuv3_baseclass_offset,
2106 gnuv3_method_ptr_to_value): Update.
2107 * jv-lang.c (evaluate_subexp_java): Update.
2108 * m2-lang.c (evaluate_subexp_modula2): Update.
2109 * python/python-value.c (valpy_getitem, valpy_binop): Update.
2110 * wrapper.c (gdb_value_subscript): Update.
2111 * varobj.c (c_describe_child): Update.
2113 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
2115 * gdbtypes.h (make_function_type): Remove OBJFILE parameter.
2116 * gdbtypes.c (make_function_type): Remove OBJFILE parameter.
2117 (lookup_function_type): Update call.
2118 * stabsread.c (read_type): Likewise.
2119 * dwarf2read.c (read_subroutine_type): Use lookup_function_type
2120 instead of make_function_type.
2121 * jv-lang.c (type_from_class): Likewise. Do not allocate types
2122 on the fake "dynamics" obstack.
2124 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
2126 * gdbtypes.h (struct builtin_type): Remove builtin_core_addr,
2127 nodebug_text_symbol, nodebug_data_symbol, nodebug_unknown_symbol,
2128 and nodebug_tls_symbol members.
2129 (struct objfile_type): New data structure.
2130 (objfile_type): Add prototype.
2131 * gdbtypes.c (gdbtypes_post_init): Remove initialization code
2132 for types no longer in struct builtin_type.
2133 (objfile_type_data): New static variable.
2134 (_initialize_gdbtypes): Initialize it.
2135 (objfile_type): New function.
2137 * gdbtypes.h (builtin_type_error): Remove.
2138 * gdbtypes.c (build_complex): Do not use builtin_type_error.
2139 * symtab.c (builtin_type_error): Remove.
2140 (_initialize_symtab): Remove initialization.
2142 * stabsread.c (dbx_lookup_type, define_symbol, error_type,
2143 rs6000_builtin_type, read_range_type): Use per-objfile types
2144 instead of global or per-architecture builtin types.
2145 * coffread.c (decode_type): Likewise.
2146 * dwarf2read.c (read_array_type, read_tag_string_type,
2147 new_symbol, die_type): Likewise.
2148 * mdebugread.c (parse_symbol, basic_type, upgrade_type,
2149 parse_procedure, psymtab_to_symtab_1): Likewise.
2150 * xcoffread.c (process_xcoff_symbol): Likewise.
2151 * parse.c (write_exp_msymbol): Likewise.
2153 * stabsread.c (rs6000_builtin_type_data): New static variable.
2154 (_initialize_stabsread): Initialize it.
2155 (rs6000_builtin_type): Add OBJFILE argument. Allocate builtin
2156 types per-objfile instead of globally.
2158 * stabsread.c (dbx_lookup_type): Add OBJFILE argument. Use it
2159 instead of current_objfile; pass it to rs6000_builtin_type.
2160 (dbx_alloc_type, read_type, read_range_type): Update calls.
2161 (cleanup_undefined_types_noname): Add OBJFILE argument and
2162 pass it to dbx_lookup_type.
2163 (cleanup_undefined_types): Add OBJFILE argument and pass it
2164 to cleanup_undefined_types_noname.
2165 * stabsread.h (cleanup_undefined_types): Add OBJFILE argument.
2166 * buildsym.c (end_symtab): Update call.
2168 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
2170 * darwin-nat-info.c (darwin_debug_regions_recurse): Use
2171 target_gdbarch instead of current_gdbarch.
2173 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
2175 * Makefile.in (ALL_64_TARGET_OBS): Add amd64-windows-tdep.o.
2176 (ALL_TARGET_OBS): Add moxie-tdep.o, i386-darwin-tdep.o, and
2179 * configure.tgt: Add comment.
2181 2009-06-28 Paul Pluzhnikov <ppluzhnikov@google.com>
2183 * mi/mi-cmds.c (mi_cmds): Remove unimplemented entries.
2185 2009-06-27 Daniel Jacobowitz <dan@codesourcery.com>
2186 Jan Kratochvil <jan.kratochvil@redhat.com>
2188 * NEWS: Document inlined function support.
2189 * Makefile.in (SFILES): Add inline-frame.c.
2190 (COMMON_OBS): Add inline-frame.o.
2191 * block.c (contained_in): Rewrite to use lexical nesting.
2192 (block_linkage_function): Skip inlined function blocks.
2193 (block_inlined_p): New.
2194 * block.h (struct block): Update comment.
2195 (block_inlined_p): New prototype.
2196 * blockframe.c (get_frame_block): Handle inlined functions.
2197 (get_frame_function): Do not use block_linkage_function.
2198 (block_innermost_frame): Use get_frame_block and contained_in.
2199 * breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache.
2200 Skip over inlined functions. Simplify epilogue check.
2201 (bpstat_check_breakpoint_conditions): Use get_stack_frame_id.
2203 (set_momentary_breakpoint): Only accept non-inlined frames.
2204 (watch_command_1): Use frame_unwind_caller_pc and
2205 frame_unwind_caller_id instead of get_prev_frame.
2206 (until_break_command): Likewise. Use get_stack_frame_id.
2207 * buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions.
2208 * dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function.
2209 * dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine.
2210 (read_func_scope, new_symbol): Likewise. Handle arguments specially
2211 for inlined functions without call site information.
2212 (inherit_abstract_dies): Allow tag mismatch for inlined subroutines.
2213 (die_specification): Treat DW_AT_abstract_origin as a specification.
2214 (read_type_die): Handle DW_TAG_inlined_subroutine.
2215 * frame-unwind.c (frame_unwind_init): Add inline_frame_unwind.
2216 * frame.c (fprint_frame_id): Print inline depth.
2217 (fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME.
2218 (skip_inlined_frames, get_stack_frame_id): New.
2219 (frame_unwind_caller_id): Use skip_inlined_frames.
2220 (frame_id_inlined_p): New.
2221 (frame_id_eq): Make the logic match the comments. Add inline_depth
2223 (frame_id_inner): Handle inlined functions.
2224 (frame_unwind_pc): New function, copied from frame_unwind_caller_pc.
2225 (frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc.
2226 (get_prev_frame_1): Check for inline frames. Split out frame
2227 allocation to get_prev_frame_raw.
2228 (get_prev_frame_raw): New function.
2229 (get_prev_frame): Handle inline frames.
2230 (get_frame_pc): Use frame_unwind_pc.
2231 (get_frame_address_in_block): Skip inlined frames on both sides.
2232 (pc_notcurrent): Delete.
2233 (find_frame_sal): Rewrite to handle inline call sites. Use
2234 get_frame_address_in_block.
2235 (deprecated_update_frame_pc_hack): Make static.
2236 * frame.h: Update comments.
2237 (struct frame_id): Add inline_depth.
2238 (enum frame_type): Add INLINE_FRAME.
2239 (frame_id_inlined_p, get_stack_frame_id): New prototypes.
2240 * gdbthread.h (struct thread_info): Add step_stack_frame_id field.
2241 * infcmd.c (set_step_frame): New function.
2242 (step_once): Use set_step_frame. Handle inlined functions.
2243 (until_next_command): Use set_step_frame.
2244 (finish_backward), finish_forward): Use get_stack_frame_id.
2245 (finish_command): Support inlined functions.
2246 * inferior.h (set_step_info): New prototype.
2247 * infrun.c (RESUME_ALL): Use minus_one_ptid.
2248 (clear_proceed_status): Clear step_stack_frame_id.
2249 (init_wait_for_inferior): Call clear_inline_frame_state.
2250 (init_execution_control_state): Make static.
2251 (set_step_info): New function.
2252 (init_thread_stepping_state): Do not set the symtab or line here.
2253 (stepped_in_from): New function.
2254 (handle_inferior_event): Handle inlined functions. Use set_step_info.
2255 (insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id.
2256 (struct inferior_status): Add step_stack_frame_id.
2257 (save_inferior_status, restore_inferior_status): Save and restore
2258 step_stack_frame_id.
2259 * inline-frame.c, inline-frame.h: New files.
2260 * minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC.
2261 * regcache.c (regcache_write_pc): Call reinit_frame_cache.
2262 * s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME.
2263 * stack.c (frame_show_address): New.
2264 (print_frame_info, print_frame): Use it.
2265 (find_frame_funname): Use get_frame_function. Handle inlined blocks.
2266 (frame_info): Mark inlined functions.
2267 (backtrace_command_1): Use get_current_user_frame.
2268 (print_frame_local_vars, print_frame_label_vars): Update comments.
2269 (return_command): Refuse inlined functions.
2270 * symtab.c (lookup_symbol_aux_local): Stop at inlined function
2272 (find_function_start_sal): Avoid inlined functions.
2273 (completion_list_add_fields): New function.
2274 (default_make_symbol_completion_list): Use it. Use block_static_block
2275 and block_global_block. Check for inlined functions.
2276 (skip_prologue_using_sal): Avoid line number comparison across
2278 * symtab.h (struct symbol): Add is_inlined.
2279 (SYMBOL_INLINED): New.
2280 * target.c (target_resume): Call clear_inline_frame_state.
2281 * valops.c (value_of_variable): Check block_inlined_p.
2283 2009-06-27 Daniel Jacobowitz <dan@codesourcery.com>
2285 * frame.c (frame_unwind_id): Renamed to ...
2286 (frame_unwind_caller_id): ... this. All callers updated.
2287 (frame_pc_unwind): Renamed to ...
2288 (frame_unwind_caller_pc): ... this. All callers updated.
2289 * frame.h: Document frame_unwind_caller_WHAT functions.
2290 (frame_unwind_id): Renamed to ...
2291 (frame_unwind_caller_id): ... this.
2292 (frame_pc_unwind): Renamed to ...
2293 (frame_unwind_caller_pc): ... this.
2294 * hppa-tdep.c (hppa_find_unwind_entry_in_block): Correct comment.
2295 * stack.c (parse_frame_specification_1): Do not rely on
2298 2009-06-27 Michael Snyder <msnyder@vmware.com>
2300 * infrun.c (handle_inferior_event): Improve handling of
2301 reverse-stepping into and over shared library functions.
2303 2009-06-25 Karen Osmond <karen.osmond@gmail.com>
2305 * linespec.c (find_method): Add new not_found_ptr parameter to
2306 bring in line with symtab_from_filename, decode_variable.
2307 (decode_compound): Likewise. Also propagate not_found_ptr to
2309 (decode_line_1): Propagate not_found_ptr to decode_compound.
2310 (cplusplus_error): Now throws NOT_FOUND_ERROR.
2312 2009-06-25 Karen Osmond <karen.osmond@gmail.com>
2314 * MAINTAINERS (Write After Approval): Add self.
2316 2009-06-23 Ulrich Weigand <uweigand@de.ibm.com>
2318 * valops.c (value_one): Reimplement broken decimal-float case.
2320 2009-06-23 Ulrich Weigand <uweigand@de.ibm.com>
2322 * eval.c (evaluate_subexp_standard): Use expression architecture
2323 instead of current_gdbarch.
2325 * infrun.c (handle_inferior_event): Avoid unncessary reference
2326 to current_gdbarch and get_current_frame ().
2328 2009-06-23 Ulrich Weigand <uweigand@de.ibm.com>
2330 * breakpoint.h (set_longjmp_breakpoint): Add THREAD argument.
2331 (enum bptype): Add bp_longjmp_master.
2333 * breakpoint.c (create_longjmp_master_breakpoint): New function.
2334 (update_breakpoints_after_exec): Handle bp_longjmp_master
2335 breakpoints. Call create_longjmp_master_breakpoint.
2336 (print_it_typical, bpstat_stop_status, bpstat_what,
2337 print_one_breakpoint_location, allocate_bp_location, mention,
2338 delete_command, breakpoint_re_set_one): Handle bp_longjmp_master.
2339 (breakpoint_re_set): Call create_longjmp_master_breakpoint.
2340 (create_longjmp_breakpoint): Delete.
2341 (set_longjmp_breakpoint): Add THREAD argument. Reimplement
2342 to install momentary clones of bp_longjmp_master breakpoints.
2344 * infcmd.c (step_1): Pass thread to set_longjmp_breakpoint.
2346 2009-06-23 Cary Coutant <ccoutant@google.com>
2348 * dwarf2read.c (dwarf_decode_lines): Ignore rows where is_stmt is 0.
2349 Set basic_block to 0 after a special opcode.
2351 2009-06-23 Jan Kratochvil <jan.kratochvil@redhat.com>
2353 Fix a regression by the mmap patch from 2009-06-16.
2354 * symfile.c (reread_symbols): Move sym_finish and clear_objfile_data
2355 calls before deleting the OBJFILE obstack. Extend the comment.
2357 2009-06-23 Ulrich Weigand <uweigand@de.ibm.com>
2359 * jv-lang.h (JAVA_OBJECT_SIZE): Remove.
2360 (get_java_object_header_size): Add GDBARCH parameter.
2361 * jv-lang.c (get_java_object_header_size): Add GDBARCH parameter.
2362 Use it instead of current_gdbarch.
2363 (evaluate_subexp_java): Replace JAVA_OBJECT_SIZE with call to
2364 get_java_object_header_size.
2365 * jv-valprint.c (java_value_print): Likewise.
2367 2009-06-23 Sami Wagiaalla <swagiaal@redhat.com>
2369 * dwarf2read.c (process_die): Handle import statements
2370 (DW_TAG_imported_declaration, case DW_TAG_imported_module)
2371 (read_import_statement): New.
2372 (read_func_scope): Update using_directives to point to current context
2373 (read_lexical_block_scope): Ditto.
2374 * cp-support.h: Added prototype for cp_add_using.
2375 * cp-namespace.c: Removed local context_stack.
2376 (cp_initialize_namespace): Deleted.
2377 (cp_finalize_namespace): Deleted.
2378 (cp_add_using_directive): Use using_directives instead of using_list.
2379 (cp_add_using): No longer static.
2380 * buildsym.h: Created global using_direct variable.
2381 Created using_direct variable in context_stack.
2382 * buildsym.c (finish_block): Set using directives for the block under
2384 (start_symtab): Removed call to cp_initialize_namespace().
2385 (end_symtab): Removed call to cp_finalize_namespace().
2386 (push_context): Save and reset using_directives.
2387 * block.c (block_using): Return using directives for given
2388 block instead of static block.
2390 2009-06-23 Ulrich Weigand <uweigand@de.ibm.com>
2392 * target-descriptions.h (struct type): Do not declare.
2393 (struct tdesc_type): Declare.
2394 (tdesc_named_type): Change return type to struct tdesc_type *.
2395 (tdesc_record_type): Remove.
2396 (tdesc_create_vector): Add prototype.
2397 (tdesc_create_union): Likewise.
2398 (tdesc_add_field): Likewise.
2400 * target-descriptions.c (struct tdesc_reg): Replace gdb_type
2401 member by tdesc_type member.
2402 (struct tdesc_type_field, tdesc_type_field): Add type and vector def.
2403 (struct tdesc_type, tdesc_type_p): Likewise.
2404 (struct tdesc_arch_reg, tdesc_arch_reg): Likewise.
2405 (struct tdesc_feature): Change type of "types" to VEC(tdesc_type_p).
2406 (struct tdesc_arch_data): Replace registers member by arch_regs.
2408 (tdesc_predefined_types): Change to array of pre-defined
2409 struct tdesc_type structures. Add "code_ptr" and "data_ptr".
2410 (tdesc_named_type): Return struct tdesc_type * instead of GDB type.
2411 (tdesc_gdb_type): New function.
2413 (target_find_description): Update for data structure changes.
2414 (tdesc_data_cleanup): Likewise.
2415 (tdesc_numbered_register): Likewise.
2416 (tdesc_use_registers): Likewise.
2417 (tdesc_create_reg): Likewise.
2419 (tdesc_find_arch_register): New function.
2420 (tdesc_find_register): Use it.
2421 (tdesc_register_type): Use tdesc_gdb_type to generate GDB type from
2422 tdesc_type on demand; cache generated types in tdesc_arch_reg.
2424 (tdesc_free_type): New function.
2425 (tdesc_free_feature): Call it.
2427 (tdesc_create_vector): New function.
2428 (tdesc_create_union): Likewise.
2429 (tdesc_add_field): Likewise.
2430 (tdesc_record_type): Remove.
2432 (tdesc_type_id): Remove.
2433 (maint_print_c_tdesc_cmd): Update for data structure changes. Update
2434 generated code to create tdesc_type structures instead of GDB types.
2436 * xml-tdesc.c: Do not include "gdbtypes.h".
2437 (struct tdesc_parsing_data): Change type of current_union to
2438 struct tdesc_type *.
2439 (tdesc_start_reg): Do not special-case "code_ptr" or "data_ptr".
2440 (tdesc_start_union): Call tdesc_create_union.
2441 (tdesc_start_field): Call tdesc_add_field.
2442 (tdesc_start_vector): Call tdesc_create_vector.
2443 (tdesc_end_union): Remove.
2444 (feature_children): Remove reference to tdesc_end_union.
2446 * features/arm-with-iwmmxt.c: Regenerate.
2447 * features/mips-linux.c: Regenerate.
2448 * features/mips64-linux.c: Regenerate.
2449 * features/rs6000/powerpc-32.c: Regenerate.
2450 * features/rs6000/powerpc-32l.c: Regenerate.
2451 * features/rs6000/powerpc-403.c: Regenerate.
2452 * features/rs6000/powerpc-403gc.c: Regenerate.
2453 * features/rs6000/powerpc-505.c: Regenerate.
2454 * features/rs6000/powerpc-601.c: Regenerate.
2455 * features/rs6000/powerpc-602.c: Regenerate.
2456 * features/rs6000/powerpc-603.c: Regenerate.
2457 * features/rs6000/powerpc-604.c: Regenerate.
2458 * features/rs6000/powerpc-64.c: Regenerate.
2459 * features/rs6000/powerpc-64l.c: Regenerate.
2460 * features/rs6000/powerpc-7400.c: Regenerate.
2461 * features/rs6000/powerpc-750.c: Regenerate.
2462 * features/rs6000/powerpc-860.c: Regenerate.
2463 * features/rs6000/powerpc-altivec32.c: Regenerate.
2464 * features/rs6000/powerpc-altivec32l.c: Regenerate.
2465 * features/rs6000/powerpc-altivec64.c: Regenerate.
2466 * features/rs6000/powerpc-altivec64l.c: Regenerate.
2467 * features/rs6000/powerpc-e500.c: Regenerate.
2468 * features/rs6000/powerpc-e500l.c: Regenerate.
2469 * features/rs6000/powerpc-isa205-32l.c: Regenerate.
2470 * features/rs6000/powerpc-isa205-64l.c: Regenerate.
2471 * features/rs6000/powerpc-isa205-altivec32l.c: Regenerate.
2472 * features/rs6000/powerpc-isa205-altivec64l.c: Regenerate.
2473 * features/rs6000/powerpc-isa205-vsx32l.c: Regenerate.
2474 * features/rs6000/powerpc-isa205-vsx64l.c: Regenerate.
2475 * features/rs6000/powerpc-vsx32.c: Regenerate.
2476 * features/rs6000/powerpc-vsx32l.c: Regenerate.
2477 * features/rs6000/powerpc-vsx64.c: Regenerate.
2478 * features/rs6000/powerpc-vsx64l.c: Regenerate.
2479 * features/rs6000/rs6000.c: Regenerate.
2481 2009-06-23 Joel Brobecker <brobecker@adacore.com>
2483 * ada-lang.c (decode_packed_array): If the value is a pointer to
2484 an array, then use value_ind to dereference it, not ada_value_ind.
2485 (ada_template_to_fixed_record_type_1): Handle the case where a
2486 dynamic field is an aligner type.
2487 (to_fixed_array_type): Add handling for packed array types.
2488 (ada_get_base_type): Do not follow the XVS type if the type is
2490 (ada_evaluate_subexp): Split a few statements up for clarity
2492 <OP_FUNCALL>: Add handling of the case of a packed array that
2493 has already been fixed.
2495 2009-06-23 Joel Brobecker <brobecker@adacore.com>
2497 * ada-lang.c (evaluate_subexp): Delete. Use the version from eval.c.
2498 (evaluate_subexp_type): Reimplement using evaluate_subexp.
2499 * value.h (evaluate_subexp): Add declaration.
2500 * eval.c (evaluate_subexp): Make non-static.
2501 * objc-lang.c (print_object_command): Use evaluate_subexp.
2503 2009-06-23 Paul Pluzhnikov <ppluzhnikov@google.com>
2505 Revert 2009-05-14 breakpoint commit (no longer needed).
2506 * breakpoint.h (breakpoint_re_set_objfile): Remove
2507 * breakpoint.c (breakpoint_re_set_objfile): Likewise
2508 (create_overlay_event_breakpoint): Remove objfile parameter,
2509 iterate over all objfiles.
2510 * objfiles.c (objfile_relocate): Update.
2511 * symfile.c (new_symfile_objfile): Likewise.
2513 2009-06-23 Tom Tromey <tromey@redhat.com>
2516 * c-lang.c (classify_type): Iterate over typedefs.
2517 * c-valprint.c (textual_element_type): Iterate over typedefs.
2519 2009-06-22 Tristan Gingold <gingold@adacore.com>
2521 * darwin-nat.c (darwin_xfer_partial): Use host_address_to_string
2524 2009-06-22 Jan Kratochvil <jan.kratochvil@redhat.com>
2527 * buildsym.c (block_compar): New function.
2528 (end_symtab): Replace the bubble sort by a qsort based code.
2530 2009-06-22 Sami Wagiaalla <swagiaal@redhat.com>
2532 * MAINTAINERS (Write After Approval): Add self.
2534 2009-06-22 Ulrich Weigand <uweigand@de.ibm.com>
2536 * spu-tdep.c (spu_get_longjmp_target): New function.
2537 (spu_gdbarch_init): Install it.
2539 2009-06-22 H.J. Lu <hongjiu.lu@intel.com>
2542 * remote.c (getpkt_or_notif_sane_1): Initialize val to -1.
2544 2009-06-21 Michael Snyder <msnyder@vmware.com>
2546 * inferior.h: Update ancient comment.
2548 2009-06-20 Aleksandar Ristovski <aristovski@qnx.com>
2549 Pedro Alves <pedro@codesourcery.com>
2551 * solib-svr4.c (IGNORE_FIRST_LINK_MAP_ENTRY): Avoid dereferencing
2553 (scan_dyntag): Skip if input bfd isn't elf flavoured.
2554 (locate_base): Call elf_locate_base even without an exec_bfd.
2556 2009-06-19 Samuel Bronson <naesten@gmail.com>
2559 * cli/cli-decode.c (apropos_cmd): Skip traversing abbreviations
2560 for prefix commands to avoid duplicates in the output.
2562 2009-06-19 Samuel Bronson <naesten@gmail.com>
2565 * cli/cli-decode.c (apropos_cmd): Fix avoidance of double
2568 2009-06-19 Jerome Guitton <guitton@adacore.com>
2570 * breakpoint.c (expand_line_sal_maybe): When explicit_line,
2571 skip prologue on each sals.
2572 (skip_prologue_sal): Return explicit_line and explicit_pc
2575 2009-06-19 Tristan Gingold <gingold@adacore.com>
2577 * darwin-nat.c (_initialize_darwin_inferior): Remove commented-out
2580 2009-06-19 Tristan Gingold <gingold@adacore.com>
2581 * machoread.c (macho_symtab_read): Adjust for bfd changes.
2582 * darwin-nat.h (struct darwin_exception_msg): New type to describe
2584 (struct private_thread_info): New type to describe the state of the
2586 (DEF_VEC_I thread_t): Removed, replaced by ...
2587 (DEF_VEC_O darwin_thread_t): ... this new type.
2588 (struct darwin_inferior): Renamed to ...
2589 (struct private_inferior): ... this type. Fields added.
2590 (darwin_not_port): Moved into the private inferior structure.
2591 * darwin-nat.c: Add includes, improve comments.
2592 Rewrite to handle multiple threads and processes.
2593 (darwin_resume_to): New function and protype.
2594 (darwin_resume, darwin_wait_to, darwin_wait): Ditto.
2595 (darwin_kill_inferior): Add ops argument.
2596 (darwin_pid_to_str): New function.
2597 (darwin_thread_alive): Ditto.
2598 (darwin_inf, darwin_not_port): Removed.
2599 (darwin_inf_fake_stop): New variable.
2600 (msgin, msgout, msg_state, exc_msg): Removed.
2601 (mach_check_error): Use warning instead of error.
2602 (darwin_ptrace): Adjust debug level.
2603 (cmp_thread_t): Fix names (typo).
2604 (darwin_check_new_threads): Argument is now an inferior,
2605 adjust for new structures, add no change check, ignore dead ports,
2606 handle first thread case.
2607 (find_inferior_task_it): New function.
2608 (find_inferior_notify_it): Ditto.
2609 (darwin_find_inferior_by_task): Ditto.
2610 (darwin_find_inferior_by_notify): Ditto.
2611 (darwin_find_thread): Ditto.
2612 (darwin_suspend_inferior): Ditto.
2613 (darwin_resume_inferior): Ditto.
2614 (catch_exception_raise_state): Removed.
2615 (catch_exception_raise_state_identity): Removed.
2616 (darwin_suspend_inferior_it): New function.
2617 (darwin_resume_inferior_it): Ditto.
2618 (darwin_dump_message): New function, extracted from darwin_wait.
2619 (darwin_decode_exception_message): New function.
2620 (darwin_encode_reply): New function.
2621 (catch_exception_raise): Removed.
2622 (darwin_send_reply): New function, extracted from darwin_resume.
2623 (darwin_resume_thread): New function, extracted from darwin_resume.
2624 (struct resume_inferior_threads_param): New type.
2625 (darwin_resume_inferior_threads_it): New function.
2626 (darwin_resume_inferior_threads): New function.
2627 (darwin_suspend_inferior_threads): New function.
2628 (darwin_resume): Mostly rewritten to handle multiple threads and
2630 (darwin_decode_message): New function extracted from darwin_wait.
2631 (cancel_breakpoint): New function.
2632 (darwin_wait): Mostly rewritten. Handle multiple threads.
2633 (darwin_mourn_inferior): Adjust for per process structures.
2634 (darwin_reply_to_all_pending_messages): New function.
2635 (darwin_stop_inferior): Adjust for per inferior structures.
2636 (darwin_attach_pid): Ditto.
2637 (darwin_init_thread_list): Ditto.
2638 (darwin_attach): Ditto.
2639 (darwin_detach): Ditto.
2640 (darwin_files_info): Now empty.
2641 (darwin_pid_to_str): Adjust returns string to match one expected by
2643 (darwin_read_write_inferior): Rename err variable to match other uses.
2644 Adjust debug message. Handle submaps.
2645 (darwin_xfer_memory): Adjust for per inferior structures.
2646 (set_enable_mach_exceptions): Ditto.
2647 (darwin_pid_to_exec_file): New function.
2648 (darwin_get_ada_task_ptid): Ditto.
2649 (darwin_supports_multi_process): Ditto.
2650 (_initialize_darwin_inferior): Remove useless assertion, adjust for
2651 per inferior structures. Add new target operations.
2653 2009-06-18 Hui Zhu <teawater@gmail.com>
2654 Michael Snyder <msnyder@vmware.com>
2656 * infrun.c (handle_inferior_event): Improve reverse stepping
2657 through function epilogue.
2659 * infrun.c (handle_inferior_event): Reverse-next through
2662 2009-06-18 Paul Pluzhnikov <ppluzhnikov@google.com>
2664 * dwarf2-frame.c (struct comp_unit): Use bfd_size_type for
2667 2009-06-17 Tom Tromey <tromey@redhat.com>
2669 * dwarf2read.c (zlib_decompress_section): Use a cleanup.
2671 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
2673 * gdbarch.sh (pointer_to_address): Change to type 'm'.
2674 (address_to_pointer): Likewise.
2675 * gdbarch.c, gdbarch.h: Regenerate.
2677 * inferior.h (unsigned_pointer_to_address): Add GDBARCH argument.
2678 (signed_pointer_to_address): Likewise.
2679 (unsigned_address_to_pointer, address_to_signed_pointer): Likewise.
2680 * findvar.c (unsigned_pointer_to_address): Likewise.
2681 (signed_pointer_to_address): Likewise.
2682 (unsigned_address_to_pointer, address_to_signed_pointer): Likewise.
2684 * avr-tdep.c (avr_address_to_pointer): Likewise.
2685 (avr_pointer_to_address): Likewise.
2686 * iq2000-tdep.c (iq2000_pointer_to_address): Likewise.
2687 (iq2000_address_to_pointer): Likewise.
2688 * m32c-tdep.c (m32c_m16c_address_to_pointer): Likewise.
2689 (m32c_m16c_pointer_to_address): Likewise.
2690 * spu-tdep.c (spu_pointer_to_address): Likewise.
2691 * xstormy16-tdep.c (xstormy16_pointer_to_address): Likewise.
2692 (xstormy16_address_to_pointer): Likewise.
2694 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
2696 * printcmd.c (print_scalar_formatted): Always truncate
2697 unsigned data types.
2699 * cli-dump.c (struct callback_data): Change type of load_offset
2701 (restore_binary_file): Update type casts.
2702 (restore_command): Parse load_offset as address, not long.
2704 * utils.c (string_to_core_addr): Do not sign-extend value.
2705 * varobj.c (find_frame_addr_in_frame_chain): Truncate frame_base
2706 before comparing against requested frame address.
2708 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
2710 * gdbarch.sh (gcore_bfd_target): New gdbarch callback.
2711 * gdbarch.h, gdbarch.c: Regenerate.
2713 * gcore.c (default_gcore_target): Make return value const.
2714 Call gdbarch_gcore_bfd_target if present.
2715 (default_gcore_arch, default_gcore_mach): Use target_gdbarch.
2717 * corelow.c (core_read_description): Call gdbarch_core_read_description
2718 on core_gdbarch instead of current_gdbarch.
2720 * ppc-linux-tdep.c (ppc_linux_init_abi): Install gcore_bfd_target.
2722 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
2724 * gdbtypes.c (create_string_type): Receive character type as argument.
2725 * gdbtypes.h (create_string_type): Add character type argument.
2726 * dwarf2read.c (read_tag_string_type): Pass character type to
2729 * value.h (value_string): Add character type argument.
2730 * valops.c (value_string): Add character type argument. Pass it to
2731 create_string_type. Do not allocate space in inferior.
2732 * valarith.c (value_concat): Pass character type to value_string.
2734 * value.h (value_typed_string): Rename to ...
2735 (value_cstring): ... this.
2736 * valops.c (value_typed_string): Rename to ...
2737 (value_cstring): ... this.
2738 * c-lang.c (evaluate_subexp_c): Update.
2740 * python/python-value.c (builtin_type_pychar): New define.
2741 (convert_value_from_python): Call value_cstring instead
2742 of value_from_string.
2743 * value.c (value_from_string): Remove.
2744 * value.h (value_from_string): Remove.
2746 * eval.c (evaluate_subexp_standard): Pass character type to
2747 value_string. Pass expression architecture to value_nsstring
2748 and lookup_child_selector.
2749 * objc-lang.h (lookup_objc_class): Add GDBARCH parameter.
2750 (lookup_child_selector): Likewise.
2751 (value_nsstring): Likewise.
2752 * objc-lang.c (lookup_objc_class): Add GDBARCH parameter.
2753 Pass character type to value_string..
2754 (lookup_child_selector): Likewise.
2755 (value_nsstring): Add GDBARCH parameter, use it instead of
2756 objfile architecture. Pass architecture to lookup_objc_class
2757 and lookup_child_selector. Pass character type to value_string.
2758 (end_msglist): Pass architecture to lookup_objc_class.
2759 * objc-exp.y: Pass architecture to lookup_objc_class.
2761 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
2763 * gdbtypes.h (struct language_defn): Add forward declaration.
2764 (lookup_typename): Add LANGUAGE and GDBARCH parameters.
2765 (lookup_unsigned_typename): Likewise.
2766 (lookup_signed_typename): Likewise.
2767 * gdbtypes.c (lookup_typename): Add LANGUAGE and GDBARCH parameters.
2768 Use them instead of current_language and current_gdbarch.
2769 (lookup_unsigned_typename): Add LANGUAGE and GDBARCH parameters.
2770 Pass them to lookup_typename.
2771 (lookup_signed_typename): Likewise.
2773 * c-exp.y: Pass parse_language and parse_gdbarch to
2774 lookup_unsigned_typename and lookup_signed_typename.
2775 * objc-exp.y: Likewise.
2776 * m2-exp.y: Pass parse_language and parse_gdbarch to lookup_typename.
2778 * c-lang.c (evaluate_subexp_c): Pass expression language and
2779 gdbarch to lookup_typename.
2780 * printcmd.c (printf_command): Pass current language and
2781 gdbarch to lookup_typename.
2782 * python/python-type.c (typy_lookup_typename): Likewise.
2783 Include "language.h".
2785 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
2787 * sparc64-nat.c (sparc64_gregset_supplies_p): Add GDBARCH parameter.
2788 Use it instead of current_gdbarch. Pass architecture to
2789 sparc32_gregset_supplies_p.
2790 (sparc64_fpregset_supplies_p): Add GDBARCH parameter. Use it instead
2791 of current_gdbarch. Pass architecture to sparc32_fpregset_supplies_p.
2792 * sparc64nbsd-nat.c (sparc64nbsd_gregset_supplies_p,
2793 sparc64nbsd_fpregset_supplies_p): Likewise.
2794 * sparc-nat.c (sparc_gregset_supplies_p, sparc_fpregset_supplies_p):
2795 Add GDBARCH parameter.
2796 (sparc32_gregset_supplies_p, sparc32_fpregset_supplies_p): Likewise.
2797 (sparc_fetch_inferior_registers): Pass regcache architecture to
2798 sparc_gregset_supplies_p and sparc_fpregset_supplies_p.
2799 (sparc_store_inferior_registers): Likewise.
2800 * sparc-nat.h (sparc_gregset_supplies_p, sparc_fpregset_supplies_p:
2801 Add GDBARCH parameter.
2802 (sparc32_gregset_supplies_p, sparc32_fpregset_supplies_p): Likewise.
2804 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
2806 * ada-tasks.c (read_known_tasks_array): Use target_gdbarch instead
2808 * aix-thread.c (pd_enable): Likewise.
2809 * amd64-linux-nat.c (ps_get_thread_area): Likewise.
2810 * bsd-uthread.c (bsd_uthread_activate): Likewise.
2811 * linux-nat.c (linux_nat_info_proc_cmd): Likewise.
2812 * linux-thread-db.c (enable_thread_event): Likewise.
2813 * monitor.c (monitor_write_memory, monitor_read_memory): Likewise.
2814 * nto-procfs.c (procfs_open): Likewise.
2815 * procfs.c (invalidate_cache, procfs_insert_watchpoint,
2816 info_proc_mappings, info_mappings_callback): Likewise.
2817 * record.c (record_open): Likewise.
2818 * rs6000-nat.c (ARCH64): Likewise.
2819 * solib-darwin.c (darwin_solib_create_inferior_hook): Likewise.
2820 (darwin_bfd_open): Likewise.
2821 * memattr.c (mem_info_command): Likewise.
2823 * windows-nat.c (win32_resume): Use current regcache architecture
2824 instead of current_gdbarch.
2826 * dbug-rom.c (dbug_regname): Remove check against number of
2827 registers in current_gdbarch.
2828 * solib-pa64.c (read_dynamic_info): Remove unused variable.
2830 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
2832 * dummy-frame.c (deprecated_pc_in_call_dummy): Add GDBARCH parameter,
2833 use it instead of current_gdbarch.
2834 * frame.h (deprecated_pc_in_call_dummy): Add GDBARCH parameter.
2835 * arm-tdep.c (arm_skip_prologue): Pass architecture to
2836 deprecated_pc_in_call_dummy.
2838 * symtab.c (skip_prologue_using_sal): Add GDBARCH parameter.
2839 Use it instead of current_gdbarch.
2840 * symtab.h (skip_prologue_using_sal): Add GDBARCH parameter.
2841 * breakpoint.c (expand_line_sal_maybe): Pass architecture to
2842 skip_prologue_using_sal.
2843 * arm-tdep.c (skip_prologue_using_sal): Likewise.
2844 * lm32-tdep.c (lm32_skip_prologue): Likewise.
2845 * m32-tdep.c (m32c_skip_prologue): Likewise.
2846 * mips-tdep.c (mips_skip_prologue): Likewise.
2847 * moxie-tdep.c (moxie_skip_prologue): Likewise.
2848 * mt-tdep.c (mt_frame_unwind_cache): Likewise.
2849 * rs6000-tdep.c (rs6000_skip_prologue): Likewise.
2850 * frv-tdep.c (frv_analyze_prologue): Add GDBARCH parameter, pass
2851 it to skip_prologue_using_sal. Update call sites ...
2852 (frv_skip_prologue, frv_frame_unwind_cache): ... here.
2854 * mn10300-tdep.c (struct mn10300_prologue): Add GDBARCH member.
2855 (check_for_saved): Use it instead of current_gdbarch.
2856 (mn10300_analyze_prologue): Set it.
2858 * value.c (using_struct_return): Add GDBARCH parameter. Use it
2859 instead of current_gdbarch.
2860 * value.h (using_struct_return): Add GDBARCH parameter.
2861 * eval.c (evaluate_subexp_standard): Pass architecture to
2862 using_struct_return.
2863 * infcall.c (call_function_by_hand): Likewise.
2864 * stack.c (return_command): Likewise.
2865 * sparc-tdep.c (sparc32_push_dummy_code): Likewise.
2867 * symtab.c (in_prologue): Add GDBARCH parameter. Use it instead of
2869 * symtab.h (in_prologue): Add GDBARCH parameter.
2870 * infrun.c (handle_inferior_event): Pass architecture to in_prologue.
2872 * eval.c (evaluate_subexp_standard): Use expression architecture
2873 instead of current_gdbarch.
2875 * c-lang.c (evaluate_subexp_c): Use expression architecture and
2876 language instead of current_gdbarch and current_language.
2878 * printcmd.c (do_one_display): Use expression architecture instead
2881 * infcmd.c (print_return_value): Use architecture of stop_regcache
2882 instead of current_gdbarch.
2883 (print_vector_info, print_float_info): Remove GDBARCH argument,
2884 use frame architecture instead.
2885 (vector_info, float_info): Update calls.
2887 * objc-lang.c (objc_skip_trampoline): Use frame architecture
2888 instead of current_gdbarch.
2890 * parse.c (write_dollar_variable): Use parse architecture instead
2893 * source.c (line_info): Use objfile architecture instead of
2896 * symtab.c (find_function_start_sal): Use gdbarch instead of
2898 (print_msymbol_info): Use objfile architecture instead of
2901 * valops.c (value_assign): Use frame architecture instead of
2904 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
2906 * buildsym.c (record_line): Remove call to gdbarch_addr_bits_remove.
2908 * coffread.c (coff_symtab_read): Call gdbarch_addr_bits_remove before
2909 calling record_line.
2910 (enter_linenos): Likewise.
2911 * dbxread.c (process_one_symbol): Likewise.
2912 * dwarf2read.c (dwarf_decode_lines): Likewise.
2913 * mdebugread.c (psymtab_to_symtab_1): Likewise.
2914 * xcoffread.c (enter_line_range): Likewise.
2916 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
2918 * ax-gdb.c (gen_bitfield_ref): Add EXP argument, use expression
2919 architecture instead of current_gdbarch.
2920 (gen_struct_ref): Add EXP argument, pass to get_bitfield_ref.
2921 (gen_expr): Pass expression to get_struct_ref.
2923 * symtab.h (struct symbol_ops): Add GDBARCH parameter to
2924 tracepoint_var_ref callback.
2925 * ax-gdb.c (gen_var_ref): Pass architecture to tracepoint_var_ref
2926 symbol operation callback.
2927 * dwarf2loc.c (dwarf2_tracepoint_var_ref): Add GDBARCH parameter.
2928 Use it instead of current_gdbarch.
2929 (locexpr_tracepoint_var_ref): Add GDBARCH parameter. Pass it to
2930 dwarf2_tracepoint_var_ref.
2931 (loclist_tracepoint_var_ref): Likewise.
2933 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
2935 * prologue-value.c (make_pv_area): Add ADDR_BIT argument.
2936 Use it instead of address bits of current_gdbarch.
2937 * prologue-value.c (make_pv_area): Add ADDR_BIT argument.
2938 * arm-tdep.c (thumb_analyze_prologue): Pass address bits to
2940 (arm_scan_prologue): Likewise.
2941 * m32c-tdep.c (m32c_analyze_prologue): Likewise.
2942 * mep-tdep.c (mep_analyze_prologue): Likewise.
2943 * mn10300-tdep.c (mn10300_analyze_prologue): Likewise.
2944 * s390-tdep.c (s390_analyze_prologue): Likewise.
2946 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
2948 * mi/mi-main.c (mi_cmd_data_list_register_names): Use selected
2949 frame architecture instead of current_gdbarch.
2950 (mi_cmd_data_list_changed_registers): Likewise.
2951 (mi_cmd_data_list_register_values): Likewise. Pass selected
2952 frame to get_register.
2953 (get_register): Add FRAME argument, use it as frame to retrieve
2954 registers from (instead of selected frame). Use frame architecture
2955 instead of current_gdbarch.
2956 (mi_cmd_data_write_register_values): Use current regcache
2957 architecture instead of current_gdbarch.
2959 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
2961 * tui/tui-regs.c (tui_show_register_group): Remove GDBARCH parameter;
2962 use frame architecture instead. Replace current_gdbarch uses.
2963 (tui_show_registers): Update call.
2964 (tui_get_register): Remove GDBARCH parameter; use frame architecture
2966 (tui_show_register_group): Update call.
2967 (tui_check_register_values): Likewise.
2968 (tui_register_format): Remove GDBARCH parameter; use frame
2969 architecture instead. Replace current_gdbarch uses.
2970 (tui_get_register): Update call.
2972 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
2974 * gdbarch.sh (construct_inferior_arguments): Remove.
2975 * gdbarch.c, gdbarch.h: Regenerate.
2976 * infcmd.c (get_inferior_args): Call construct_inferior_arguments
2977 directly instead of gdbarch_construct_inferior_arguments.
2978 (construct_inferior_arguments): Remove GDBARCH argument.
2979 * inferior.h (construct_inferior_arguments): Likewise.
2981 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
2983 * symfile.c (section_is_mapped): Use objfile architecture instead
2985 (TARGET_LONG_BYTES): Remove.
2986 (read_target_long_array): Add SIZE argument. Use it instead of
2988 (simple_read_overlay_table): Retrieve long size from objfile
2989 architecture; pass it to read_target_long_array.
2990 (simple_read_overlay_region_table): Likewise.
2991 (simple_overlay_update_1): Likewise.
2993 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
2995 * infrun.c (cleanup_displaced_step_closure): Remove.
2996 (displaced_step_clear_cleanup): Move to before displaced_step_prepare.
2997 (displaced_step_prepare): Use displaced_step_clear_cleanup instead
2998 of cleanup_displaced_step_closure.
2999 (handle_inferior_event, keep_going): Use thread architecture instead
3002 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
3004 * infrun.c (handle_inferior_event): Use current frame architecture
3005 or thread architecture instead of current_gdbarch. Pass to
3006 handle_step_into_function and handle_step_into_function_backward.
3007 (handle_step_into_function): Add GDBARCH parameter. Use it instead
3009 (handle_step_into_function_backward): Likewise.
3010 (insert_step_resume_breakpoint_at_frame): Use frame architecture
3011 instead of current_gdbarch.
3012 (insert_step_resume_breakpoint_at_caller): Likewise.
3014 2009-06-17 Pierre Muller <muller@ics.u-strasbg.fr>
3015 Pedro Alves <pedro@codesourcery.com>
3017 * infcmd.c (post_create_inferior): Call breakpoint_re_set after target
3018 is pushed for watchpoint promotion to hardware watchpoint.
3020 2009-06-16 Paul Pluzhnikov <ppluzhnikov@google.com>
3022 * dwarf2read.c (dwarf_info_section, dwarf_abbrev_section)
3023 (dwarf_line_section, dwarf_pubnames_section, dwarf_aranges_section)
3024 (dwarf_loc_section, dwarf_macinfo_section, dwarf_str_section)
3025 (dwarf_ranges_section, dwarf_frame_section)
3026 (dwarf_eh_frame_section): Removed.
3027 (dwarf2_resize_section): Likewise.
3028 (dwarf2_read_section): Now static, use bfd_mmap() if possible.
3029 (dwarf2_get_section_info): New function.
3030 (munmap_section_buffer): Likewise.
3031 (dwarf2_per_objfile_cleanup): Likewise.
3032 (section_is_p): Signature change.
3033 * dwarf2-frame.c (dwarf2_build_frame_info): Use
3034 dwarf2_get_section_info instead of dwarf2_read_section.
3036 2009-06-16 Paul Pluzhnikov <ppluzhnikov@google.com>
3038 * solib.c (symbol_add_stub): New FLAGS parameter.
3039 (solib_read_symbols): FROM_TTY -> FLAGS, call symbol_add_stub
3041 (solib_add): Defer breakpoint_re_set until after all solibs.
3042 * bsd-uthread.c (bsd_uthread_solib_loaded): Adjust.
3043 * rs6000-nat.c (objfile_symbol_add): Adjust.
3044 * symfile.c (syms_from_objfile): Merge parameters into ADD_FLAGS.
3045 (new_symfile_objfile): Likewise.
3046 (symbol_file_add_with_addrs_or_offsets): Likewise.
3047 (symbol_file_add_from_bfd): Likewise.
3048 (symbol_file_add): Likewise.
3049 * symfile.h (enum symfile_add_flags): New. Adjust prototypes.
3050 * symfile-mem.c (symbol_file_add_from_memory): Adjust.
3051 * windows-nat.c (safe_symbol_file_add_stub): Adjust.
3052 * machoread.c (macho_oso_symfile, macho_symfile_read): Adjust.
3054 2009-06-16 Keith Seitz <keiths@redhat.com>
3056 * linespec.c (collect_methods): Delete.
3057 (add_matching_methods): Reove destructor special case.
3058 (find_method): Call find_methods directly instead of
3060 * valops.c (value_struct_elt): Remove destructor
3062 (check_field): Likewise.
3063 (value_struct_elt_for_reference): Likewise.
3064 (destructor_name_p): Remove misleading comment about dtors
3065 being "special cases".
3066 * gdbtypes.h (get_destructor_fn_field): Remove. No longer needed.
3067 * gdbtypes.c (get_destructor_fn_field): Likewise.
3069 2009-06-16 Pedro Alves <pedro@codesourcery.com>
3071 * mi/mi-main.c (mi_cmd_data_read_memory): Dispatch
3072 TARGET_OJECT_MEMORY reads to the topmost target, not to the
3073 flattened current_target.
3075 2009-06-16 Tristan Gingold <gingold@adacore.com>
3077 * avr-tdep.c (struct gdbarch_tdep): Replace the unused field with
3079 (avr_register_name): Add const to register_names.
3080 (avr_scan_arg_moves): Move inside avr_scan_prologue.
3081 (avr_scan_prologue): Add pc_end argument.
3082 Only read prologue bytes that can be read.
3083 Limit the scan to the known prologue length.
3084 Makes pattern variables static and const.
3086 (avr_skip_prologue): Pass func_end argument to avr_scan_prologue.
3088 (avr_breakpoint_from_pc): Constify avr_break_insn.
3089 (avr_extract_return_value): Fix function comment.
3090 (avr_frame_unwind_cache): Fix GNU style violations.
3091 Pass current_pc argument to avr_scan_prologue to stop prologue
3092 analysis to the current pc. This fixes the bug with the 'next'
3094 Correctly set the SP register of the previous frame (use call_length).
3095 (avr_frame_prev_register): Fix indentation.
3096 Correctly read PC from the stack on avr6 architectures.
3097 (avr_push_dummy_call): Fix indentation.
3098 (avr_gdbarch_init): Set call_length according to the architecture.
3100 2009-06-15 Phil Muldoon <pmuldoon@redhat.com>
3102 * infcall.c (show_unwind_on_terminating_exception_p): New
3104 (call_function_by_hand): Create breakpoint and clean-up call for
3105 std::terminate.breakpoint. Add unwind_on_terminating_exception_p
3106 gate. Pop frame on breakpoint hit.
3107 (_initialize_infcall): Add add_setshow_boolean_cmd for
3108 unwind-on-terminating-exception.
3110 2009-06-12 Kevin Buettner <kevinb@redhat.com>
3112 * dwarf2read.c (dwarf2_psymtab_to_symtab): Propagate
3113 `has_section_at_zero' flag from stripped objfile to separate,
3114 debug info only, objfile.
3116 2009-06-12 Pedro Alves <pedro@codesourcery.com>
3118 * exec.h (section_table_xfer_memory_partial): Improve description,
3119 mention SECTION_NAME.
3120 * exec.c (section_table_xfer_memory_partial): Remove stale
3123 2009-06-11 Aleksandar Ristovski <aristovski@qnx.com>
3125 * nto-tdep.h (nto_generic_supply_gpregset)
3126 (nto_generic_supply_fpregset, nto_generic_supply_altregset): Remove.
3127 * nto-tdep.c (nto_generic_supply_gpregset)
3128 (nto_generic_supply_fpregset, nto_generic_supply_altregset): Remove.
3130 2009-06-11 Aleksandar Ristovski <aristovski@qnx.com>
3132 * i386-nto-tdep.c (I386_NTO_SIGCONTEXT_OFFSET): Remove define.
3133 (i386nto_sigcontext_addr): Change the way context address is calculated.
3134 (i386nto_init_abi): Remove usage of deprecated sc_reg_offset and
3135 sc_sp_offset and set sc_reg_offset and sc_num_regs.
3137 2009-06-11 Aleksandar Ristovski <aristovski@qnx.com>
3139 * i386-nto-tdep.c (i386_nto_target): Remove definition.
3140 (init_i386nto_ops): Use macros to set fields to global
3141 current_nto_target directly.
3142 (i386nto_init_abi): Remove unused nto_set_target call.
3143 * nto-tdep.h (nto_set_target): Remove unused declaration.
3144 * nto-tdep.c (nto_set_target): Remove unused function.
3146 2009-06-11 Pedro Alves <pedro@codesourcery.com>
3148 * breakpoint.c (break_command_really): Rename local variable
3149 breakpoint_chain to bkpt_chain.
3151 2009-06-11 Aleksandar Ristovski <aristovski@qnx.com>
3153 Add support for XMM registers.
3154 * i386-nto-tdep.c (i386nto_regset_id): Add case for SSE register set.
3155 (i386nto_register_area): Correctly calculate offsets and sizes for
3156 all supported registers.
3158 2009-06-11 Tom Tromey <tromey@redhat.com>
3160 * eval.c (evaluate_subexp_standard) <OP_OBJC_MSGCALL>: Remove
3161 'static' from local variable definitions.
3163 2009-06-11 Pedro Alves <pedro@codesourcery.com>
3165 * symtab.c (append_expanded_sal): Remove unused local variables.
3167 2009-06-11 Pedro Alves <pedro@codesourcery.com>
3169 * infrun.c (sched_multi): New global.
3170 (resume): If sched_multi is set, resume only threads of the
3172 (prepare_to_proceed): Don't switch over to wait_ptid if we're
3173 resuming a different inferior, and sched_multi is off.
3174 (show_schedule_multiple): New.
3175 (_initialize_infrun): Register new "set schedule-multiple" command.
3176 * inferior.h (sched_multi): Declare.
3177 * NEWS: Mention new "schedule-multiple" setting.
3179 2009-06-11 Pedro Alves <pedro@codesourcery.com>
3181 * varobj.c (varobj_create): Properly restore the selected frame.
3183 2009-06-05 Tom Tromey <tromey@redhat.com>
3185 * inferior.c (print_inferior): Make a table, not a list. Emit
3188 2009-06-10 Jonas Maebe <jonas.maebe@elis.ugent.be>
3190 * darwin-nat.c (darwin_stop_inferior): Pass 0 as options to
3191 darwin_wait (blocking wait).
3192 (darwin_kill_inferior): Likewise.
3194 2009-06-10 Pedro Alves <pedro@codesourcery.com>
3196 * infrun.c (handle_inferior_event): Update comment around trying
3197 to revert back to a stepping thread that has exited.
3199 2009-06-10 Cary Coutant <ccoutant@google.com>
3201 * dwarf2read.c (dwarf_decode_lines): Recognize and ignore
3202 DW_LNE_set_discriminator.
3204 2009-06-10 Pierre Muller <muller@ics.u-strasbg.fr>
3206 * breakpoint.c: ARI fixes.
3207 (create_overlay_event_breakpoint): Avoid assignment inside if statement.
3208 (print_one_breakpoint_location): Likewise.
3209 (create_longjmp_breakpoint): Likewise.
3210 (tracepoint_save_command): Likewise
3211 (bpstat_find_step_resume_breakpoint): No operator at end of line.
3212 (bpstat_stop_status): Likewise.
3213 (describe_other_breakpoints): Likewise.
3214 (hw_watchpoint_used_count): Likewise.
3215 (expand_line_sal_maybe): Likewise.
3216 (break_command_really): Likewise.
3217 (delete_command): Likewise.
3218 (do_enable_breakpoint): Likewise.
3219 (delete_trace_command): Likewise.
3220 (catch_exception_command_1): Likewise and remove extra parentheses.
3222 2009-06-08 Pierre Muller <muller@ics.u-strasbg.fr>
3224 * breakpoint.c (_initialize_breakpoint): Remove "bu" command alias of
3225 "ubreak" command that does not exist.
3227 2009-06-08 Pierre Muller <muller@ics.u-strasbg.fr>
3229 * cli/cli-decode.c (add_alias_cmd): Correct assertion.
3231 2009-06-07 Pedro Alves <pedro@codesourcery.com>
3233 * hppa-tdep.c (_initialize_hppa_tdep): Add declaration.
3235 2009-06-07 Pedro Alves <pedro@codesourcery.com>
3238 * proc-utils.h (procfs_first_available): Don't declare here.
3239 * sol-thread.c: Include procfs.h instead of sys/procfs.h and
3241 * procfs.c: Include procfs.h.
3242 (procfs_target): Make it public. Don't register
3243 procfs_can_use_hw_breakpoint here.
3244 (proc_set_watchpoint): Check for PCWATCH or PIOCSWATCH being
3245 defined instead of TARGET_HAS_HARDWARE_WATCHPOINTS.
3246 (procfs_can_use_hw_breakpoint): Remove check of
3247 TARGET_HAS_HARDWARE_WATCHPOINTS.
3248 (procfs_use_watchpoints): Register procfs_can_use_hw_breakpoint
3250 (_initialize_procfs): Don't add the procfs target here.
3252 * i386-sol2-nat.c: Include target.h and procfs.h.
3253 (_initialize_amd64_sol2_nat): Install the procfs target here,
3254 customized with watchpoints support.
3255 * irix5-nat.c: Include target.h.
3256 (_initialize_core_irix5): Rename to ...
3257 (_initialize_irix5_nat): ... this. Install the procfs target
3258 here, customized with watchpoints support.
3259 * alpha-nat.c: Include procfs.h.
3260 (_initialize_core_alpha): Rename to...
3261 (_initialize_alpha_nat): ... this. Install the procfs target
3262 here, customized with watchpoints support.
3263 * sparc-sol2-nat.c: Include target.h and procfs.h.
3264 (_initialize_sparc_sol2_nat): New.
3266 * config/i386/nm-i386sol2.h (TARGET_HAS_HARDWARE_WATCHPOINTS): Delete.
3267 * config/sparc/nm-sol2.h (TARGET_HAS_HARDWARE_WATCHPOINTS): Delete.
3268 * config/mips/irix5.mh (NAT_FILE): Delete.
3269 * config/mips/irix6.mh (NAT_FILE): Delete.
3270 * config/mips/nm-irix5.h: Delete.
3272 20009-06-07 Pedro Alves <pedro@codesourcery.com>
3274 * auxv.c (procfs_xfer_auxv): Change type of the `object' argument
3275 to enum target_object. Cleanup comments.
3276 * auxv.h: Include "target.h". Cleanup comments to not mention
3277 NATIVE_XFER_AUXV anymore.
3279 2009-06-07 Pedro Alves <pedro@codesourcery.com>
3281 * inferior.h (procfs_first_available): Move declaration to...
3282 * proc-utils.h: ... here.
3283 * sol-thread.c: Include procfs.h and proc-utils.h.
3285 2009-06-07 Pedro Alves <pedro@codesourcery.com>
3287 * inferior.h (proc_iterate_over_mappings): Delete declaration.
3288 * nto-tdep.h (proc_iterate_over_mappings): Delete declaration.
3289 * procfs.c (proc_iterate_over_mappings): Delete.
3291 2009-06-07 Pedro Alves <pedro@codesourcery.com>
3293 * target.h (struct target_ops): Make to_has_all_memory,
3294 to_has_memory, to_has_stack, to_has_registers and to_has_execution
3295 methods instead of variables.
3296 (target_has_all_memory_1, target_has_memory_1, target_has_stack_1)
3297 (target_has_registers_1, target_has_execution_1): Declare
3299 (target_has_all_memory): Rewrite to call target_has_all_memory_1.
3300 (target_has_memory): Rewrite to call target_has_memory_1.
3301 (target_has_stack): Rewrite to call target_has_all_stack_1.
3302 (target_has_registers): Rewrite to call target_has_registers_1.
3303 (target_has_execution): Rewrite to call target_has_execution_1.
3304 (default_child_has_all_memory, default_child_has_memory)
3305 (default_child_has_stack, default_child_has_registers)
3306 (default_child_has_execution): Declare.
3307 (target_mark_running, target_mark_exited): Delete declarations.
3308 * target.c (default_child_has_all_memory,
3309 default_child_has_memory, default_child_has_stack,
3310 default_child_has_registers, default_child_has_execution): New.
3311 (target_has_all_memory_1, target_has_memory_1, target_has_stack_1,
3312 target_has_registers_1, target_has_execution_1): New.
3313 (add_target): Default the to_has_all_memory, to_has_all_memory,
3314 to_has_memory, to_has_stack, to_has_registers and to_has_execution
3315 callbacks to return 0.
3316 (update_current_target): Do not inherit to_has_all_memory,
3317 to_has_memory, to_has_stack, to_has_registers or to_has_execution.
3318 (target_mark_running, target_mark_exited): Delete.
3319 (memory_xfer_partial): Adjust.
3320 (target_read_memory, target_write_memory, target_search_memory):
3321 Dispatch to the the top-most target, not the flattened
3323 (target_info): Adjust.
3324 (init_dummy_target): Install return_zero as callback for
3325 to_has_all_memory, to_has_memory, to_has_stack, to_has_registers,
3327 (set_maintenance_target_async_permitted): Use have_live_inferiors
3328 instead of target_has_execution.
3329 * target-memory.c (target_write_memory_blocks): Dispatch memory
3330 writes to the the top-most target, not the flattened
3333 * breakpoint.c (insert_breakpoints): Don't check for
3334 target_has_execution here.
3335 (update_global_location_list): Check if there are live inferiors
3336 to debug instead of target_has_execution.
3337 * infcmd.c (kill_command, detach_command): Check if there are
3338 inferiors instead of target_has_execution.
3339 * inferior.h (have_live_inferiors): Declare.
3340 * inferior.c (have_live_inferiors): New.
3341 * infrun.c (normal_stop): Don't check for target_has_execution to
3342 finish the thread states.
3343 * thread.c (is_thread_state, is_stopped, is_exited, is_running)
3344 (any_running, is_executing): Remove checks for
3345 target_has_execution.
3346 * top.c (kill_or_detach): Don't try to kill core inferiors.
3347 (quit_target): Don't check for target_has_execution.
3349 * corelow.c (core_has_memory, core_has_stack, core_has_registers):
3351 (init_core_ops): Install core_has_memory, core_has_stack and
3353 * exec.c (exec_has_memory): New.
3354 (init_exec_ops): Install exec_has_memory.
3355 * remote.c (remote_add_inferior): Don't call target_mark_running.
3356 (remote_start_remote): Don't call target_mark_exited or call
3357 target_mark_running.
3358 (remote_open_1): Use have_inferiors instead of
3359 target_has_execution. Don't use target_mark_exited.
3360 (init_remote_ops): Install deafult_child_has_all_memory,
3361 default_child_has_memory, default_child_has_stack,
3362 default_child_has_registers, default_child_has_execution.
3363 * bsd-kvm.c (bsd_kvm_return_one): New.
3364 (bsd_kvm_add_target): Register bsd_kvm_return_one as
3365 to_has_memory, to_has_stack and to_has_registers callbacks.
3366 * remote-m32r-sdi.c (m32r_return_one): New.
3367 (init_m32r_ops): Register it.
3368 * inf-child.c (inf_child_target): Adjust to register
3369 default_child_has_all_memory, default_child_has_memory,
3370 default_child_has_stack, default_child_has_registers,
3371 default_child_has_execution callbacks.
3372 * gnu-nat.c (init_gnu_ops): Likewise.
3373 * go32-nat.c (init_go32_ops): Likewise.
3374 * hpux-thread.c (init_hpux_thread_ops): Likewise.
3375 * monitor.c (init_base_monitor_ops): Likewise.
3376 * nto-procfs.c (init_procfs_ops): Likewise.
3377 * remote-mips.c (_initialize_remote_mips): Likewise.
3378 * windows-nat.c (init_windows_ops): Likewise.
3379 * remote-sim.c (gdbsim_create_inferior): Don't use
3380 target_mark_running or target_mark_exited.
3381 (gdbsim_mourn_inferior): Don't call target_mark_exited.
3382 (init_gdbsim_ops): Adjust to register
3383 default_child_has_all_memory, default_child_has_memory,
3384 default_child_has_stack, default_child_has_registers,
3385 default_child_has_execution callbacks.
3387 * linux-nat.c (linux_nat_xfer_partial): If reading memory, and
3388 there's no inferior selected, defer to a lower stratum.
3390 2009-06-05 Tom Tromey <tromey@redhat.com>
3392 * varobj.c (update_dynamic_varobj_children): Wrap error text in
3394 (install_visualizer): Likewise.
3395 (varobj_set_visualizer): Likewise.
3397 2009-06-05 Marc Khouzam <marc.khouzam@ericsson.com>
3399 * mi/mi-main.c (mi_cmd_exec_continue)
3400 (mi_cmd_exec_interrupt): Adjust parsing of thread group
3401 ids to current reality, where they don't have any 'p' prefix.
3403 2009-06-05 Aleksandar Ristovski <aristovski@qnx.com>
3405 * corelow.c (core_open): Check for core_gdbarch before calling
3406 gdbarch_target_signal_from_host.
3408 2009-06-05 Tom Tromey <tromey@redhat.com>
3410 * c-exp.y (parse_number): Don't use K&R definition.
3412 (yyerror): Likewise.
3414 2009-06-04 Jan Kratochvil <jan.kratochvil@redhat.com>
3416 * varobj.c (varobj_update): Fix out of scope varobjs to not to change.
3418 2009-06-04 Ulrich Weigand <uweigand@de.ibm.com>
3420 * symtab.h: Rename SYMBOL_OPS to SYMBOL_COMPUTED_OPS.
3421 * ax-gdb.c (gen_var_ref): Likewise.
3422 * findvar.c (read_var_value, symbol_read_needs_frame): Likewise.
3423 * printcmd.c (address_info): Likewise.
3424 * dwarf2loc.c (dwarf_expr_frame_base): Likewise.
3425 * dwarf2read.c (dwarf2_symbol_mark_computed): Likewise.
3426 * symtab.h: Rename struct symbol_ops to struct symbol_computed_ops.
3427 * dwarf2loc.h: Likewise.
3428 * dwarf2loc.c (dwarf2_locexpr_funcs, dwarf2_loclist_funcs): Likewise.
3430 * symtab.h: (struct symbol_register_ops): New struct definition.
3431 (struct symbol): Make "ops" member a union of symbol_computed_ops and
3432 symbol_register_ops callback pointers.
3433 (SYMBOL_REGISTER_OPS): New macro.
3434 * tracepoint.c: Include "objfiles.h".
3435 (scope_info, collect_symbol): Use SYMBOL_REGISTER_OPS register_number
3436 callback to retrieve register numbers.
3437 * ax-gdb.c (gen_var_ref): Likewise.
3438 * findvar.c (read_var_value): Likewise.
3439 * printcmd.c (address_info): Likewise.
3441 * coffread.c (coff_reg_to_regnum): New function.
3442 (coff_register_funcs): New static variable.
3443 (process_coff_symbol): Do not call gdbarch_sdb_reg_to_regnum.
3444 Install SYMBOL_REGISTER_OPS callbacks.
3445 * mdebugread.c (mdebug_reg_to_regnum): New function.
3446 (mdebug_register_funcs): New static variable.
3447 (parse_symbol): Do not call gdbarch_ecoff_reg_to_regnum.
3448 Install SYMBOL_REGISTER_OPS callbacks.
3449 * stabsread.c (stab_reg_to_regnum): New function.
3450 (stab_register_funcs): New static variable.
3451 (define_symbol): Do not call gdbarch_stab_reg_to_regnum.
3452 Install SYMBOL_REGISTER_OPS callbacks.
3454 2009-06-03 Doug Evans <dje@google.com>
3456 * symfile.c (reread_symbols): Reset psymtabs_addrmap to NULL
3457 after discarding its contents.
3459 2009-06-03 Pedro Alves <pedro@codesourcery.com>
3461 * target.c: Include "exec.h".
3462 (update_current_target): Don't inherit to_sections or
3464 (target_get_section_table): New.
3465 (target_section_by_addr): Fetch the section table from the passed
3467 (memory_xfer_partial): Handle unmapped overlay sections before
3468 anything else. Get the overlay mapped address here. Adjust to
3469 use section_table_xfer_memory_partial.
3470 (get_target_memory): Request a TARGET_OBJECT_RAW_MEMORY object
3471 instead of TARGET_OBJECT_MEMORY.
3472 (target_resize_to_sections): Delete.
3473 (remove_target_sections): Adjust to remove target sections from
3474 `current_target_sections', and use resize_section_table.
3475 * target.h (struct target_ops) <to_sections, to_sections_end>:
3477 <to_get_section_table>: New method.
3478 (xfer_memory, print_section_info): Delete declarations.
3479 (struct target_section_table): New type.
3480 (target_get_section_table): Declare.
3481 (target_resize_to_sections): Delete declaration.
3482 (remove_target_sections): Delete declaration.
3483 * bfd-target.c (target_bfd_xfer_partial): Get the section table
3485 (target_bfd_get_section_table): New.
3486 (target_bfd_xclose): Adjust.
3487 (target_bfd_reopen): Store the section table in the to_data field.
3488 * corelow.c (core_data): New.
3489 (core_close): Adjust to release core_data and its sections.
3490 (core_open): Allocate core_data, and build its target sections
3492 (deprecated_core_resize_section_table): New.
3493 (core_files_info): Pass core_data to print_section_info.
3494 (core_xfer_partial): Adjust to use
3495 section_table_xfer_memory_partial for TARGET_OBJECT_MEMORY xfers.
3496 (init_core_ops): Do not install a deprecated_xfer_memory callback
3498 * solib.c (update_solib_list): Add the shared library sections
3499 to the current target sections table.
3500 * exec.c (current_target_sections_1): New global.
3501 (current_target_sections): New global.
3502 (exec_close_1): New function, refactored from exec_close. Remove
3503 the exec_bfd's sections from the current target sections table.
3504 Adjust to not use to_sections.
3505 (exec_close): Remove all target sections. Call exec_close_1.
3506 (exec_file_clear): Use exec_close_1 instead of unpushing the
3508 (exec_file_attach): Likewise. Adjust to not use to_sections. Add
3509 exec_bfd's sections to the current target sections table. Don't
3510 push the exec_ops target here.
3511 (resize_section_table): New.
3512 (add_target_sections): New.
3513 (remove_target_sections): Moved here.
3514 (section_table_xfer_memory): Adjust to implement the xfer_partial
3515 interface, and rename to...
3516 (section_table_xfer_memory_partial): ... this, replacing the
3517 current function of that same name.
3518 (exec_get_section_table): New.
3519 (exec_xfer_partial): New.
3520 (xfer_memory): Delete.
3521 (print_section_info): Replace the target_ops parameter by a
3522 target_section_table parameter.
3523 (exec_files_info, set_section_command, exec_set_section_address):
3524 Adjust to use the current sections table.
3525 (init_exec_ops): Do not register a deprecated_xfer_memory
3526 callback. Register to_xfer_partial and to_get_section_table
3528 * infrun.c (handle_inferior_event): Update comments around
3530 * rs6000-nat.c (xcoff_relocate_core): Adjust to use
3531 deprecated_core_resize_section_table.
3532 * exec.h (resize_section_table): Declare.
3533 (section_table_xfer_memory_partial): Add const char * argument.
3534 (remove_target_sections): Declare here.
3535 (add_target_sections): Declare.
3536 (print_section_info): Declare here.
3537 * gdbcore.h (deprecated_core_resize_section_table): Declare.
3539 2009-06-03 Ulrich Weigand <uweigand@de.ibm.com>
3541 * value.h (struct internalvar): Remove.
3542 (get_internalvar_integer): Add prototype.
3543 (set_internalvar_integer): Add prototype.
3544 (clear_internalvar): Add prototype.
3546 * value.c (struct internalvar): Move here. Add type member. Remove
3547 endian member. Add union_internalvar member instead of value member.
3548 (init_if_undefined_command): Use intvar->type.
3549 (create_internalvar): Do not initialize value/endian, but type.
3550 (create_internalvar_type_lazy): Call create_internalvar.
3551 (value_of_internalvar): Handle host-side internalvar contents.
3552 (set_internalvar_component): Likewise.
3553 (set_internalvar): Likewise.
3554 (get_internalvar_integer): New function.
3555 (clear_internalvar): Likewise.
3556 (set_internalvar_integer): Likewise.
3557 (preserve_values): Handle host-side internalvar contents.
3559 * breakpoint.c (set_breakpoint_count, set_tracepoint_count): Call
3560 set_internalvar_integer instead of set_internalvar.
3561 * findcmd.c (find_command): Likewise.
3562 * infrun.c (handle_inferior_event): Likewise.
3563 * source.c (forward_search_command, reverse_search_command): Likewise.
3564 * tracepoint.c (set_traceframe_num, set_tracepoint_num,
3565 set_traceframe_context): Likewise.
3567 * printcmd.c (x_command): Call clear_internalvar instead of
3569 * tracepoint.c (set_traceframe_context): Likewise.
3571 * breakpoint.c (get_number_trailer): Call get_internalvar_integer
3572 instead of value_of_internalvar.
3573 * linespec.c (decode_dollar): Likewise.
3575 * expprint.c (dump_subexp_body_standard): Use internalvar_name
3576 instead of accessing internalvar private elements.
3577 * valops.c (value_assign): Copy from original source instead of
3578 accessing internalvar private elements.
3580 2009-06-03 Ulrich Weigand <uweigand@de.ibm.com>
3582 * scm-lang.c (builtin_type_scm): Remove.
3583 (scm_lookup_name): Add GDBARCH parameter. Use it instead of
3584 objfile architecture. Use per-architecture builtin_scm_type instead
3585 of builtin_type_scm.
3586 (evaluate_exp): Pass expression architecture to scm_lookup_name.
3588 (scm_get_field): Add SIZE parameter. Use it instead of
3589 TYPE_LENGTH (builtin_type_scm).
3591 (build_scm_types): New function.
3592 (scm_type_data): New variable.
3593 (builtin_scm_type): New function.
3594 (_initialize_scheme_language): Do not initialize builtin_type_scm.
3595 Register build_scm_types as post-init function for scm_type_data.
3597 * scm-exp.c (scm_lreadr): Use per-architecture builtin_scm_type
3598 instead of builtin_type_scm.
3600 * scm-lang.h (SCM_CAR, SCM_CDR): Pass SCM_SIZE to scm_get_field.
3601 (scm_get_field): Add SIZE paramter.
3602 (scm_scmval_print): Remove prototype.
3603 (builtin_type_scm): Remove.
3604 (struct builtin_scm_type): Add structure definition.
3605 (builtin_scm_type): Add prototype.
3607 * scm-valprint.c (scm_inferior_print): Add TYPE parameter. Use it
3608 instead of builtin_core_addr type; do not use objfile architecture.
3609 (scm_scmlist_print): Add TYPE parameter. Use it to define SCM_SIZE.
3610 Pass type to scm_scmval_print.
3611 (scm_ipruk): Add TYPE parameter. Use it to define SCM_SIZE.
3612 (scm_scmval_print): Make static. Add TYPE parameter. Use it to
3613 define SCM_SIZE. Pass type to scm_ipruk and scm_scmlist_print.
3614 (scm_val_print): Pass type to scm_inferior_print and scm_scmval_print.
3616 2009-06-03 Ulrich Weigand <uweigand@de.ibm.com>
3618 * mdebugread.c (mdebug_type_void, mdebug_type_char, mdebug_type_short,
3619 mdebug_type_int, mdebug_type_int_32, mdebug_type_int_64,
3620 mdebug_type_long_32, mdebug_type_long_64, mdebug_type_long_long_64,
3621 mdebug_type_unsigned_char, mdebug_type_unsigned_short,
3622 mdebug_type_unsigned_int_32, mdebug_type_unsigned_int_64,
3623 mdebug_type_unsigned_long_32, mdebug_type_unsigned_long_64,
3624 mdebug_type_unsigned_long_long_64, mdebug_type_adr_32,
3625 mdebug_type_adr_64, mdebug_type_float, mdebug_type_double,
3626 mdebug_type_complex, mdebug_type_double_complex,
3627 mdebug_type_fixed_dec, mdebug_type_float_dec, mdebug_type_string):
3630 (basic_type_data): New global variable.
3631 (basic_type): New function.
3632 (parse_type): Remove static basic type map map_bt. Call basic_type
3633 to get basic types instead of using mdebug_type_ variables.
3635 (parse_symbol): Use builtin types instead of mdebug_type_ variables.
3636 (upgrade_type): Likewise.
3637 (parse_procedure): Likewise.
3638 (psymtab_to_symtab_1): Likewise.
3640 (_initialize_mdebugread): Do not initialize mdebug_type_ variables.
3641 Initialize basic_type_data.
3643 2009-06-03 Ulrich Weigand <uweigand@de.ibm.com>
3645 * dfp.h (decimal_binop): Convert LEN_RESULT to input parameter.
3646 * dfp.c (promote_decimal): Remove.
3647 (decimal_binop): Convert LEN_RESULT to input parameter.
3648 Remove call to decimal_binop.
3649 (decimal_compare): Remove call to decimal_binop.
3651 * valarith.c (value_binop): Pass desired result type length
3654 2009-06-01 Tristan Gingold <gingold@adacore.com>
3656 * configure.tgt (avr): Set gdb_sim to use the simulator.
3658 2009-05-29 Doug Evans <dje@google.com>
3660 * infrun.c (prepare_to_proceed): Document. Assert !non_stop.
3661 If scheduler-locking is enabled, we're not going to be singlestepping
3662 any other previously stopped thread.
3664 2009-05-29 Pedro Alves <pedro@codesourcery.com>
3666 * mi/mi-interp.c (mi_on_resume): Initialize `count' to 0.
3668 2009-05-29 Eli Zaretskii <eliz@gnu.org>
3670 * i386-tdep.c (i386_go32_init_abi): Use SVR4 register numbering
3671 for stabs and COFF debug info.
3673 2009-05-28 Pedro Alves <pedro@codesourcery.com>
3675 * infrun.c (handle_inferior_event): When thread hoping, switch
3676 inferior_ptid to the event thread before removing breakpoints from
3677 the target. If not stopping, also try to revert back to a thread
3678 that was doing a "next". Check if that thread still exists before
3680 (currently_stepping_thread): Delete and merge with ...
3681 (currently_stepping): ... this.
3682 (currently_stepping_callback): Rename to ...
3683 (currently_stepping_or_nexting_callback): ... this, and also
3684 return true if the thread was stepping over a call (has a
3685 step-resume breakpoint).
3687 2009-05-28 Tom Tromey <tromey@redhat.com>
3689 * python/python.c (gdbpy_parameter): Rename. Fix error message.
3690 (GdbMethods): Change "get_parameter" to "parameter".
3692 2009-05-28 Pierre Muller <muller@ics.u-strasbg.fr>
3693 Paul Pluzhnikov <ppluzhnikov@google.com>
3695 * configure.ac (!have_libpython): Add python-prettyprint source
3697 * configure: Regenerate.
3698 * python/python-prettyprint.c: Move "#ifdef HAVE_PYTHON" before
3701 2009-05-27 Vladimir Prus <vladimir@codesourcery.com>
3702 Tom Tromey <tromey@redhat.com>
3703 Thiago Jung Bauermann <bauerman@br.ibm.com>
3705 * mi/mi-main.c (mi_cmd_list_features): List "python" feature.
3706 * varobj.h (varobj_set_visualizer): Declare.
3707 (varobj_get_display_hint): Likewise.
3708 (varobj_update_result_t) <children_changed, value_installed>: New
3710 * mi/mi-cmds.c (mi_cmds): Add var-set-visualizer.
3711 * mi/mi-cmds.h (mi_cmd_var_set_visualizer,
3712 mi_cmd_var_set_child_range): Declare.
3713 * mi/mi-cmd-var.c (mi_cmd_var_set_visualizer): New function.
3714 (mi_cmd_var_list_children): Emit display hint.
3715 (varobj_update_one): Emit display hint. Handle dynamic children.
3716 * python/python.c (GdbMethods): Add "default_visualizer".
3717 * python/python-internal.h (apply_varobj_pretty_printer,
3718 gdbpy_get_varobj_pretty_printer, gdbpy_get_display_hint):
3720 (gdbpy_default_visualizer): Likewise.
3721 * varobj.c: Include python.h, python-internal.h.
3722 (PyObject): New typedef.
3723 (struct varobj) <children_requested, pretty_printer>: New fields.
3724 (varobj_create): Call install_default_visualizer.
3725 (instantiate_pretty_printer): New function.
3726 (varobj_set_display_format): Update.
3727 (varobj_get_display_hint): New function.
3728 (update_dynamic_varobj_children): New function.
3729 (varobj_get_num_children): Handle dynamic children.
3730 (varobj_list_children): Likewise.
3731 (install_new_value): Likewise.
3732 (varobj_add_child): New function.
3733 (install_visualizer): Likewise.
3734 (install_default_visualizer): Likewise.
3735 (varobj_set_visualizer): Likewise.
3736 (varobj_update): Handle dynamic children.
3737 (create_child): Use create_child_with_value.
3738 (create_child_with_value): New function.
3739 (value_get_print_value): Call pretty printer. Add value_formatter
3741 (c_value_of_variable): Update.
3742 (varobj_invalidate): Always free all_rootvarobj.
3743 * python/python-prettyprint.c (apply_varobj_pretty_printer): New
3745 (gdbpy_get_varobj_pretty_printer): Likewise.
3746 (gdbpy_default_visualizer): Likewise.
3748 2009-05-27 Tom Tromey <tromey@redhat.com>
3749 Thiago Jung Bauermann <bauerman@br.ibm.com>
3750 Phil Muldoon <pmuldoon@redhat.com>
3751 Paul Pluzhnikov <ppluzhnikov@google.com>
3752 Vladimir Prus <vladimir@codesourcery.com>
3754 * python/python-value.c (value_object_to_value): New function.
3755 * python/python-internal.h: Include frameobject.h.
3756 (gdbpy_children_cst, gdbpy_to_string_cst, gdbpy_display_hint_cst):
3758 (value_object_to_value): Declare.
3759 * printcmd.c (struct format_data) <raw>: New field.
3760 (last_format): Default to 0.
3761 (decode_format): Initialize val.raw. Handle /r flag.
3762 (print_command_1): Initialize fmt.raw and opts.raw.
3763 (output_command): Likewise.
3764 (x_command): Fix initialization of fmt.format. Initialize
3766 (display_command): Initialize fmt.raw.
3767 (do_one_display): Set opts.raw.
3768 * python/python.c (gdbpy_to_string_cst, gdbpy_children_cst,
3769 gdbpy_display_hint_cst): New globals.
3770 (_initialize_python): Initialize them. Set gdb.pretty_printers.
3771 * cp-valprint.c: Include python.h.
3772 (cp_print_value): Call apply_val_pretty_printer.
3773 * python/python.h (apply_val_pretty_printer): Declare.
3774 * stack.c (print_this_frame_argument_p): Remove.
3775 (print_frame_args): Compute summary flag. Don't use
3776 print_this_frame_argument_p.
3777 * valprint.c: Include python.h.
3778 (user_print_options): Initialize new fields.
3779 (scalar_type_p): New function.
3780 (val_print): Handle 'raw' and 'summary' modes. Call
3781 apply_val_pretty_printer.
3782 (value_print): Handle 'raw' mode.
3783 * valprint.h (struct value_print_options) <raw, summary>: New
3785 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-prettyprint.o
3786 (SUBDIR_PYTHON_SRCS): Add python-prettyprint.c.
3787 (python-prettyprint.o): New target.
3788 * python/python-prettyprint.c: New file.
3790 2009-05-27 Tom Tromey <tromey@redhat.com>
3791 Paul Pluzhnikov <ppluzhnikov@google.com>
3793 * mi/mi-main.c (mi_cmd_data_evaluate_expression): Use
3795 * cli/cli-dump.c (dump_value_to_file): Use value_address.
3796 * valprint.c (common_val_print): Likewise.
3797 * v850-tdep.c (v850_push_dummy_call): Use value_address.
3798 * tracepoint.c (encode_actions): Use value_address.
3799 * printcmd.c (print_formatted): Use value_address.
3800 (x_command): Likewise.
3801 * p-valprint.c (pascal_object_print_static_field): Use
3803 * mn10300-tdep.c (mn10300_push_dummy_call): Use value_address.
3804 * mips-tdep.c (mips_eabi_push_dummy_call): Use value_address.
3805 * m32r-tdep.c (m32r_push_dummy_call): Use value_address.
3806 * jv-valprint.c (java_value_print): Use value_address.
3807 * infcall.c (find_function_addr): Use value_address.
3808 * gnu-v3-abi.c (gnuv3_rtti_type): Use value_address.
3809 * gnu-v2-abi.c (gnuv2_value_rtti_type): Use value_address.
3810 * frv-tdep.c (frv_push_dummy_call): Use value_address.
3811 * frame.c (frame_register_unwind): Use value_address.
3812 (frame_unwind_register_value): Likewise.
3813 * darwin-nat-info.c (info_mach_region_command): Use
3815 * cp-valprint.c (cp_print_static_field): Use value_address.
3816 * c-valprint.c (c_value_print): Use value_address.
3817 * breakpoint.c (update_watchpoint): Use value_address.
3818 (can_use_hardware_watchpoint): Likewise.
3819 * ada-valprint.c (ada_val_print_1): Use value_address.
3820 (ada_value_print): Likewise.
3821 * ada-tasks.c (read_fat_string_value): Use value_address.
3822 * jv-lang.c (java_link_class_type): Use set_value_address.
3823 (java_link_class_type): Likewise.
3824 (get_java_utf8_name): Use value_address.
3825 (type_from_class): Likewise.
3826 (java_link_class_type): Likewise.
3827 * findvar.c (value_of_register): Use set_value_address.
3828 (read_var_value): Likewise.
3829 (read_var_value): Likewise.
3830 * eval.c (evaluate_subexp_standard): Use set_value_address.
3831 (evaluate_subexp_standard): Use value_address.
3832 * dwarf2loc.c (dwarf2_evaluate_loc_desc): Use set_value_address.
3833 * ada-lang.c (coerce_unspec_val_to_type): Use set_value_address.
3834 (ada_value_primitive_packed_val): Likewise.
3835 (ensure_lval): Likewise.
3836 (thin_data_pntr): Use value_address.
3837 (desc_bounds): Likewise.
3838 (ada_value_primitive_packed_val): Likewise.
3839 (value_assign_to_component): Likewise.
3840 (ensure_lval): Likewise.
3841 (make_array_descriptor): Likewise.
3842 (ada_to_fixed_value): Likewise.
3843 (unwrap_value): Likewise.
3844 * value.c (deprecated_value_address_hack): Remove.
3845 (value_address): New function.
3846 (value_raw_address): Likewise.
3847 (set_value_address): Likewise.
3848 (value_fn_field): Use set_value_address.
3849 (value_from_contents_and_address): Likewise.
3850 (value_fn_field): Likewise.
3851 (allocate_value_lazy): Don't use VALUE_ADDRESS.
3852 (value_as_address): Use value_address.
3853 (value_static_field): Likewise.
3854 * valops.c (search_struct_field): Use set_value_address.
3855 (value_at): Likewise.
3856 (value_at_lazy): Likewise.
3857 (value_repeat): Likewise.
3858 (value_cast_structs): Use value_address.
3859 (value_cast): Likewise.
3860 (value_fetch_lazy): Likewise.
3861 (value_assign): Likewise.
3862 (value_repeat): Likewise.
3863 (address_of_variable): Likewise.
3864 (value_coerce_array): Likewise.
3865 (value_coerce_function): Likewise.
3866 (value_addr): Likewise.
3867 (search_struct_field): Likewise.
3868 (search_struct_method): Likewise.
3869 (find_method_list): Likewise.
3870 (value_struct_elt_for_reference): Likewise.
3871 (value_full_object): Likewise.
3872 * jv-valprint.c (java_value_print): Use set_value_address.
3873 * value.h (deprecated_value_address_hack): Remove.
3874 (VALUE_ADDRESS): Remove.
3875 (value_address): Declare.
3876 (value_raw_address): Declare.
3877 (set_value_address): Declare.
3879 2009-05-27 Tom Tromey <tromey@redhat.com>
3880 Thiago Jung Bauermann <bauerman@br.ibm.com>
3881 Phil Muldoon <pmuldoon@redhat.com>
3882 Paul Pluzhnikov <ppluzhnikov@google.com>
3884 * python/python.c (_initialize_python): Call
3885 gdbpy_initialize_types.
3886 (GdbMethods): Add "lookup_type".
3887 * python/python-value.c (value_object) <type>: New field.
3888 (valpy_dealloc): Decref type.
3889 (valpy_new): Initialize type.
3890 (valpy_get_type): New function.
3891 (value_to_value_object): Initialize type.
3892 (valpy_cast): New function.
3893 (value_object_getset): Add "type".
3894 (value_object_methods): Add "cast".
3895 * python/python-internal.h (type_to_type_object): Declare.
3896 (type_object_to_type): Likewise.
3897 (gdbpy_initialize_types): Likewise.
3898 (gdbpy_lookup_type): Declare.
3899 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-type.o.
3900 (SUBDIR_PYTHON_SRCS): Add python-type.c.
3901 (python-type.o): New target.
3902 * python/python-type.c: New file.
3904 2009-05-27 Tom Tromey <tromey@redhat.com>
3905 Thiago Jung Bauermann <bauerman@br.ibm.com>
3906 Phil Muldoon <pmuldoon@redhat.com>
3908 * python/python.c: Include objfiles.h, observer.h.
3909 (gdbpy_auto_load): New global.
3910 (gdbpy_current_objfile): Likewise.
3911 (GDBPY_AUTO_FILENAME): New define.
3912 (gdbpy_new_objfile): New function.
3913 (gdbpy_get_current_objfile): Likewise.
3914 (gdbpy_objfiles): Likewise.
3915 (_initialize_python): Add "maint set auto-load". Call
3916 gdbpy_initialize_objfile. Attach objfile observer.
3917 (GdbMethods): New methods current_objfile, objfiles.
3918 * python/python-objfile.c: New file.
3919 * python/python-internal.h (objfile_to_objfile_object): Declare.
3920 (objfpy_get_printers): Likewise.
3921 (gdbpy_initialize_objfile): Likewise.
3922 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-objfile.o.
3923 (SUBDIR_PYTHON_SRCS): Add python-objfile.c.
3924 (python-objfile.o): New target.
3926 2009-05-27 Pedro Alves <pedro@codesourcery.com>
3928 * infrun.c (follow_exec): Clear the stop_requested flag.
3929 * linux-nat.c (linux_handle_extended_wait) <PTRACE_EVENT_EXEC>:
3932 2009-05-27 Aleksandar Ristovski <aristovski@qnx.com>
3934 * nto-procfs.c (get_regset): Pass correct pointer.
3936 2009-05-26 Doug Evans <dje@google.com>
3938 * dwarf2read.c (follow_die_ref): Add comment.
3939 (dwarf2_mark_helper): Tweak comment.
3940 (dwarf2_mark): Move description to its proper place.
3942 2009-05-25 Pierre Muller <muller@ics.u-strasbg.fr>
3944 * procfs.c (procfs_wait): Add options parameter.
3946 2009-05-24 Doug Evans <dje@google.com>
3948 Global renaming of find_thread_pid to find_thread_ptid.
3949 * gdbthread.h (find_thread_ptid): Renamed from find_thread_pid.
3950 * thread.c (find_thread_ptid): Renamed from find_thread_pid.
3951 All callers updated.
3953 * infrun.c (follow_fork): Initialize new step_* locals
3954 to avoid "may be used uninitialized" warnings.
3956 2009-05-24 Pedro Alves <pedro@codesourcery.com>
3958 * inflow.c (copy_terminal_info): Deep copy `run_terminal'.
3960 2009-05-24 Pedro Alves <pedro@codesourcery.com>
3962 * gdbthread.h (struct thread_info): New `pending_follow' field.
3963 * thread.c (new_thread): New function.
3964 (add_thread_silent): Use it.
3965 * breakpoint.c (internal_breakpoint_number): New global, moved
3967 (create_internal_breakpoint): ... this.
3968 (clone_momentary_breakpoint): New.
3969 * breakpoint.h (clone_momentary_breakpoint): Declare.
3970 * infrun.c (nullify_last_target_wait_ptid): Move declaration
3972 (pending_follow): Delete.
3973 (follow_fork): Handle pending follow fork event here. Moved the
3974 preserving of thread stepping state here.
3975 (resume): Don't handle pending follow fork events here. Only
3976 install the inferior's terminal modes if we're about to resume it.
3977 (proceed): Handle possible pending follow fork events here.
3978 (init_wait_for_inferior): No need to clear pending_follow anymore,
3980 (handle_inferior_event): Adjust to per-thread `pending_follow'.
3981 Call `follow_fork' to handle following the fork. If the
3982 follow-fork is cancelled, stop stepping.
3983 * linux-nat.c (linux_child_follow_fork): Adjust to per-thread
3984 `pending_follow' events. Remove code that handled preserving the
3985 thread stepping state.
3986 * inf-ptrace.c (inf_ptrace_follow_fork): Ditto.
3987 * inf-ttrace.c (inf_ttrace_follow_fork): Ditto.
3989 2009-05-24 Pierre Muller <muller@ics.u-strasbg.fr>
3991 * symfile.c (add_shared_symbol_files_command): Remove
3992 prototype and function.
3993 (_initialize _symfile): Move "add-shared-symbol-files"
3994 command and "assf" alias.
3995 * windows-nat.c (_initialize_windows_nat): to here.
3996 Change "add-shared-symbol-files" to alias.
3998 * config/i386/cygwin.mh: Remove NAT_FILE.
3999 * config/i386/mingw.mh: Remove NAT_FILE.
4000 * config/i386/mingw64.mh: Remove NAT_FILE.
4001 * config/i386/nm-cygwin.h: Remove file.
4002 * config/i386/nm-cygwin64.h: Remove file.
4004 2009-05-24 Hui Zhu <teawater@gmail.com>
4006 * i386-linux-tdep.c (I386_LINUX_RECORD_SIZE_*,
4007 I386_LINUX_RECORD_IOCTL_*,
4008 I386_LINUX_RECORD_FCNTL_*) Removed.
4009 (i386_linux_init_abi): Change size of record from macros to
4012 2009-05-24 Hui Zhu <teawater@gmail.com>
4014 * i386-linux-tdep.c (i386_linux_init_abi): Remove size_char.
4015 * linux-record.c (record_linux_system_call): Ditto.
4016 * linux-record.h (linux_record_tdep): Ditto.
4018 2009-05-23 Jan Kratochvil <jan.kratochvil@redhat.com>
4020 Replace the savestring calls by xstrdup calls where possible.
4021 * breakpoint.c (condition_command, set_raw_breakpoint)
4022 (create_catchpoint, update_breakpoint_locations): Replace the
4023 savestring calls by xstrdup calls where possible.
4024 * buildsym.c (start_subfile, patch_subfile_names, record_debugformat)
4025 (record_producer): Likewise.
4026 * coffread.c (coff_start_symtab, complete_symtab): Likewise.
4027 * corefile.c (set_gnutarget): Likewise.
4028 * dbxread.c (add_new_header_file): Likewise.
4029 * demangle.c (set_demangling_command, set_demangling_style): Likewise.
4030 * event-top.c (push_prompt, pop_prompt, command_line_handler)
4031 (set_async_prompt): Likewise.
4032 * infcmd.c (set_inferior_io_terminal, attach_command_post_wait):
4034 * language.c (set_language_command, _initialize_language): Likewise.
4035 * linespec.c (decode_line_2): Likewise.
4036 * rs6000-nat.c (add_vmap): Likewise.
4037 * top.c (set_prompt, init_history, init_main): Likewise.
4038 * tracepoint.c (stringify_collection_list): Likewise.
4039 * varobj.c (varobj_create): Remove variable expr_len. Replace the
4040 savestring calls by xstrdup calls where possible.
4041 (value_of_root, c_name_of_variable, c_describe_child): Replace the
4042 savestring calls by xstrdup calls where possible.
4043 * xcoffread.c (complete_symtab): Likewise.
4044 * cli/cli-script.c (build_command_line, define_command): Likewise.
4045 * cli/cli-setshow.c (do_setshow_command): Likewise.
4047 2009-05-23 Jan Kratochvil <jan.kratochvil@redhat.com>
4049 Remove already unreachable code.
4050 * varobj.c (varobj_get_handle): Fix comment when error is called.
4051 All callers updated.
4053 2009-05-23 Eli Zaretskii <eliz@gnu.org>
4055 * README (`configure' options): Document GDB-specific options to
4058 * symtab.c (skip_prologue_using_lineinfo): New function.
4059 (find_function_start_sal): Use it to get to the first line of
4060 function's body that has an entry in the lineinfo table.
4062 * symmisc.c (dump_symtab): Switch the current language to
4063 the language of the symtab we are dumping only if the symtab's
4064 language is neither language_auto nor language_unknown.
4066 * coffread.c (coff_symtab_read): Set language_minimal as the
4067 language for the "_globals_" pseudo-file.
4068 (process_coff_symbol): Set the symbol's language to the language
4071 2009-05-22 Pedro Alves <pedro@codesourcery.com>
4073 * target.h (struct section_table): Rename to ...
4074 (struct target_section): ... this.
4075 * exec.c: Adjust all references.
4076 * exec.h: Adjust all references.
4077 * nto-tdep.c: Adjust all references.
4078 * nto-tdep.h: Adjust all references.
4079 * ppc-linux-tdep.c: Adjust all references.
4080 * rs6000-nat.c: Adjust all references.
4081 * s390-tdep.c: Adjust all references.
4082 * solib-darwin.c: Adjust all references.
4083 * solib-frv.c: Adjust all references.
4084 * solib-irix.c: Adjust all references.
4085 * solib-null.c: Adjust all references.
4086 * solib-osf.c: Adjust all references.
4087 * solib-pa64.c: Adjust all references.
4088 * solib-som.c: Adjust all references.
4089 * solib-sunos.c: Adjust all references.
4090 * solib-svr4.c: Adjust all references.
4091 * solib-target.c: Adjust all references.
4092 * solib.c: Adjust all references.
4093 * solist.h: Adjust all references.
4094 * symfile.c: Adjust all references.
4095 * symfile.h: Adjust all references.
4096 * target.c: Adjust all references.
4098 2009-05-22 Hui Zhu <teawater@gmail.com>
4100 Add sys_fcntl argument interfaces to linux_record_tdep.
4102 * linux-record.h (linux_record_tdep): Add fcntl_F_GETLK,
4103 fcntl_F_GETLK64, fcntl_F_SETLK64 and fcntl_F_SETLKW64 to be
4105 * i386-linux-tdep.c (I386_LINUX_RECORD_FCNTL_F_GETLK,
4106 I386_LINUX_RECORD_FCNTL_F_GETLK64,
4107 I386_LINUX_RECORD_FCNTL_F_SETLK64,
4108 I386_LINUX_RECORD_FCNTL_F_SETLKW64): New macros. The values
4109 of I386 Linux sys_fcntl arguments.
4110 (i386_linux_init_abi): Set macros values to linux_record_tdep.
4111 * linux-record.c (record_linux_system_call): Change to use
4112 the interface in linux_record_tdep in sys_fcntl and
4115 * linux-record.c (record_linux_system_call): Fix the process
4116 record build error about type in CYGWIN.
4118 2009-05-22 Pedro Alves <pedro@codesourcery.com>
4120 * inflow.c (kill_command): Delete left over static declaration.
4122 2009-05-22 Pedro Alves <pedro@codesourcery.com>
4124 * bfd-target.c: Don't include gdb_assert.h or gdb_string.h.
4126 (struct section_closure): Delete.
4127 (add_to_section_table): Delete.
4128 (build_target_sections_from_bfd): Delete.
4129 (target_bfd_xfer_partial): Use section_table_xfer_memory_partial.
4130 (target_bfd_reopen): Use build_section_table.
4131 * exec.c (xfer_memory): Move most code except for overlay
4132 debugging support from here...
4133 (section_table_xfer_memory): ... to this new function.
4134 (section_table_xfer_memory_partial): New.
4135 * exec.h (section_table_xfer_memory_partial): Declare.
4136 * bfd-target.h (build_target_sections_from_bfd): Delete
4139 2009-05-22 Pedro Alves <pedro@codesourcery.com>
4141 * remote.c (compare_sections_command): Don't declare exec_bfd.
4142 * tracepoint.c: Include "gdbcore.h".
4143 (remote_set_transparent_ranges): Don't declare exec_bfd.
4145 2009-05-21 Pedro Alves <pedro@codesourcery.com>
4147 * aix-thread.c (init_aix_thread_ops): Whitespace.
4149 2009-05-21 Pedro Alves <pedro@codesourcery.com>
4151 * dec-thread.c (dec_thread_wait): Add options parameter. Use it
4152 to call the to_wait method in the target beneath.
4153 * remote-m32r-sdi.c (m32r_wait): Add options parameter.
4155 2009-05-21 Joel Brobecker <brobecker@adacore.com>
4157 * aix-thread.c (aix_thread_wait): Add options parameter. Use it
4158 to call the to_wait method in the target_beneath.
4160 2009-05-21 Pedro Alves <pedro@codesourcery.com>
4162 * linux-nat.c (linux_nat_terminal_inferior)
4163 (linux_nat_terminal_ours): Don't check sync_execution.
4164 * remote.c (remote_terminal_inferior, remote_terminal_ours):
4165 Don't check sync_execution. Update comments.
4166 * target.c (target_terminal_inferior): New.
4167 * target.h (target_terminal_inferior): Delete macro, and declare
4169 * event-top.c (async_disable_stdin): Make idempotent. Don't give
4170 the target the terminal here.
4171 * inflow.c (terminal_ours_1): Don't return early without setting
4174 2009-05-21 Pedro Alves <pedro@codesourcery.com>
4176 * target.h (TARGET_WNOHANG): New.
4177 * target.c (target_wait): Add `options' argument. Adjust.
4178 (struct target_ops) <to_wait>: Add `options' argument.
4179 (target_wait): Add `options' argument.
4180 * infrun.c (wait_for_inferior): Pass 0 as options to
4181 target_wait (blocking wait).
4182 (fetch_inferior_event): Pass TARGET_WNOHANG as options to
4184 * fork-child.c (startup_inferior): Pass 0 as options to
4185 target_wait (blocking wait).
4186 * linux-nat.c (linux_nat_create_inferior): Remove async masking.
4187 (linux_nat_wait_1): Add `target_options' argument. Use it instead
4188 of checking on target_can_async_p.
4189 (linux_nat_wait): Add `target_options' argument. Adjust.
4190 * remote.c (remote_wait_ns): Add `options' argument. Adjust to
4191 check on TARGET_WNOWAIT instead of checking on remote_is_async_p.
4192 (remote_wait_as): Add `options' argument. Adjust to check on
4193 TARGET_WNOWAIT instead of checking on remote_is_async_p. If doing
4194 a blocking wait, keep waiting until an interesting event comes
4196 (remote_wait): Add `options' argument. Don't loop here if the
4197 target is in async mode, and a blocking wait has been requested.
4199 * top.c (deprecated_target_wait_hook): Add `options' argument.
4200 * linux-thread-db.c (thread_db_wait): Add `options' argument, and
4201 pass it down to the layer beneath.
4202 * inf-ptrace.c (inf_ptrace_wait): Add `options' argument.
4203 * record.c (record_beneath_to_wait): Add `options' argument.
4204 (record_wait): Add `options' argument, and pass it down to the
4206 * bsd-uthread.c (bsd_uthread_wait): Add `options' argument.
4207 * darwin-nat.c (darwin_wait): Likewise.
4208 * defs.h (deprecated_target_wait_hook): Likewise.
4209 * gnu-nat.c (gnu_wait): Add `options' argument.
4210 * go32-nat.c (go32_wait): Likewise.
4211 * hpux-thread.c (hpux_thread_wait): Add `options' argument, and
4212 pass it down to the layer beneath.
4213 * inf-ttrace.c (inf_ttrace_wait): Add `options' argument.
4214 * monitor.c (monitor_wait): Likewise.
4215 * nto-procfs.c (procfs_wait): Likewise.
4216 * remote-mips.c (mips_wait): Add `options' argument.
4217 * remote-sim.c (gdbsim_wait): Likewise.
4218 * rs6000-nat.c (rs6000_wait): Add `options' argument.
4219 * sol-thread.c (sol_thread_wait): Add `options' argument, and pass
4220 it down to the layer beneath.
4221 * spu-linux-nat.c (spu_child_wait): Add `options' argument.
4222 * windows-nat.c (windows_wait): Likewise.
4223 * tui/tui-hooks.c (tui_target_wait_hook): Likewise. Adjust.
4225 2009-05-21 Pedro Alves <pedro@codesourcery.com>
4227 * mi/mi-interp.c (mi_on_resume): Account for whole process
4230 2009-05-21 Jan Kratochvil <jan.kratochvil@redhat.com>
4232 * m2-exp.y (MAX_FUNC): Fix trailing UNOP_MAX.
4234 2009-05-21 Jan Kratochvil <jan.kratochvil@redhat.com>
4236 * dwarf2read.c (set_cu_language): Recognize also DW_LANG_C99.
4238 2009-05-21 Jan Kratochvil <jan.kratochvil@redhat.com>
4240 Fix parsing DW_AT_const_value using DW_FORM_string.
4241 * dwarf2read.c (dwarf2_const_value <DW_FORM_string>): New.
4243 2009-05-20 Joel Brobecker <brobecker@adacore.com>
4245 * aix-thread.c (giter_count): Do not count the main thread.
4246 (giter_accum): Do not include the main thread.
4248 2009-05-19 Jan Kratochvil <jan.kratochvil@redhat.com>
4250 Remove the PROT parameter from openp.
4251 * source.c (openp): Remove the parameter PROT. Assertion check MODE.
4252 defs.h (openp): Update the prototype.
4253 Update all the openp callers.
4255 2009-05-19 Pedro Alves <pedro@codesourcery.com>
4257 * inflow.c (kill_command): Moved to infcmd.c.
4258 (_initialize_inflow): Don't add the "kill" command or clear
4260 * infcmd.c (kill_command): Moved here from inflow.c.
4261 (_initialize_infcmd): Add the "kill" command here.
4263 2009-05-19 Pedro Alves <pedro@codesourcery.com>
4265 * fork-child.c: Don't include frame.h. Include terminal.h.
4266 (fork_inferior): Call new_tty_postfork after forking adn adding
4267 the child to the inferior list.
4268 * inferior.h (new_tty_prefork, gdb_has_a_terminal): Don't declare
4270 * inflow.c (struct terminal_info): Remove const qualifier from
4271 `run_terminal' field.
4272 (inferior_thisrun_terminal): Tweak comment.
4273 (inflow_inferior_exit): Release the `run_terminal' field.
4274 (copy_terminal_info): New function.
4275 (new_tty_postfork): New function.
4276 * terminal.h (new_tty_prefork, new_tty, new_tty_postfork,
4277 (copy_terminal_info, gdb_has_a_terminal, gdb_setpgid): Declare.
4278 * inf-ptrace.c: Include terminal.h.
4279 (inf_ptrace_follow_fork): Copy the parent's terminal info to the
4281 * linux-nat.c: Include terminal.h.
4282 (linux_child_follow_fork): Copy the parent's terminal info to the
4284 * inf-ttrace.c: Include terminal.h.
4285 (inf_ttrace_follow_fork): Copy the parent's terminal info to the
4288 2009-05-19 Pedro Alves <pedro@codesourcery.com>
4290 * breakpoint.c (insert_breakpoints, breakpoint_init_inferior)
4291 (update_global_location_list): Use gdbarch_has_global_breakpoints
4292 instead of gdbarch_has_global_solist and
4293 target_supports_multi_process.
4294 * dicos-tdep.c (dicos_init_abi): Set
4295 gdbarch_has_global_breakpoints.
4296 * gdbarch.sh (has_global_solist): Update comment.
4297 (has_global_breakpoints): New.
4298 * remote.c (remote_start_remote): Use
4299 gdbarch_has_global_breakpoints instead of
4300 gdbarch_has_global_solist.
4301 * target.c (target_detach): Use gdbarch_has_global_breakpoints
4302 instead of gdbarch_has_global_solist.
4303 * infcmd.c (attach_command): Use gdbarch_has_global_solist instead
4304 of target_supports_multi_process.
4306 2009-05-18 Paul Pluzhnikov <ppluzhnikov@google.com>
4308 * objc-lang.c (find_methods): Plug a small memory leak.
4310 2009-05-18 Pedro Alves <pedro@codesourcery.com>
4312 * solib-svr4.c: Include observer.h.
4313 (debug_base, debug_loader_offset_p, debug_loader_offset)
4314 (debug_loader_name, main_lm_addr): Move these globals...
4315 (struct svr4_info): ... into this new structure.
4316 (svr4_info_p): New typedef.
4317 (svr4_info): New global.
4318 (get_svr4_info, remove_svr4_info, solib_svr4_inferior_exit): New
4320 (locate_base, solib_svr4_r_map, solib_svr4_r_brk)
4321 (solib_svr4_r_ldsomap): Add svr4_info argument. Adjust to
4323 (open_symbol_file_object): Adjust to per-inferior svr4.
4324 (svr4_default_sos, svr4_current_sos, svr4_fetch_objfile_link_map):
4326 (enable_break): Add svr4_info argument. Adjust to per-inferior
4328 (enable_break, svr4_solib_create_inferior_hook, svr4_clear_solib):
4329 Adjust to per-inferior svr4.
4330 (_initialize_svr4_solib): Install the solib_svr4_inferior_exit
4333 2009-05-18 Pedro Alves <pedro@codesourcery.com>
4335 * linux-nat.h (linux_proc_get_tgid): Declare.
4336 * linux-nat.c (linux_proc_get_tgid): New.
4337 * linux-thread-db.c (struct thread_db_info): New field
4338 `need_stale_parent_threads_check'.
4339 (add_thread_db_info): Set it.
4340 (find_new_threads_callback): Ignore stale fork parent threads.
4341 (thread_db_resume): New.
4342 (init_thread_db_ops): Install thread_db_resume.
4344 2009-05-18 Pedro Alves <pedro@codesourcery.com>
4346 * fork-child.c (fork_inferior): Only reset the thread list if this
4347 is the first inferior.
4348 (startup_inferior): If the target support multi-process, tell it
4349 to resume only the new process.
4350 * linux-nat.c (num_lwps): Delete global.
4351 (purge_lwp_list): New function.
4352 (num_lwps): New function.
4353 (add_lwp, delete_lwp): Adjust.
4355 (iterate_over_lwps): Add filter argument. Handle it.
4356 (linux_nat_attach): Remove FIXME note.
4357 (linux_nat_detach): Adjust to iterate over threads of the inferior
4358 we're detaching from. Adjust to num_lwps being a function. Don't
4359 assume the head of the lwp list is the main thread of the process
4360 we're detaching from. Don't destroy the LWP list.
4361 (resume_callback): Add debug output.
4362 (linux_nat_resume): Handle resuming a single inferior. Allow a
4363 wildcard resume in non-stop mode.
4364 (linux_handle_extended_wait): Don't assume inferior_ptid is the
4365 correct inferior of the parent LWP.
4366 (status_callback): Also check lp->waitstatus.
4367 (select_event_lwp): Add new filter parameter. Handle it.
4368 (linux_nat_filter_event): Adjust to num_lwps being a function.
4369 (linux_nat_wait_1): When adding the first lwp of the inferior, use
4370 an is_lwp check instead of checking for the number of lwps.
4371 (linux_nat_wait_1): Handle waiting for a specific tgid. Handle
4372 pending process exit statuses.
4373 (linux_nat_mourn_inferior): Don't destroy all the LWP info.
4374 Instead delete LWPs of the inferior that we're mourning. Don't
4375 unregister from the event loop here.
4376 (linux_nat_pid_to_str): Use `num_lwps'.
4377 (linux_nat_make_corefile_notes): Adjust to walk over lwps of a
4379 (linux_nat_is_async_p): Check if async was masked out.
4380 (linux_multi_process): New global.
4381 (linux_nat_supports_multi_process): New.
4382 (linux_nat_stop_lwp): Remove LWP filtering. It is done by the
4384 (linux_nat_stop): Adjust to make iterate_over_lwps itself do the
4386 (linux_nat_close): New.
4387 (linux_nat_add_target): Register linux_nat_close and
4388 linux_nat_supports_multi_process.
4389 * linux-nat.h (iterate_over_lwps): Add filter argument.
4390 * linux-thread-db.c (thread_db_handle): Delete.
4391 (proc_handle, thread_agent, td_init_p, td_ta_new_p)
4392 (td_ta_map_id2thr_p, td_ta_map_lwp2thr_p, td_ta_thr_iter_p)
4393 (td_ta_event_addr_p, td_ta_set_event_p, td_ta_event_getmsg_p)
4394 (td_thr_validate_p, td_thr_get_info_p, td_thr_event_enable_p)
4395 (td_thr_tls_get_addr_p, td_create_bp_addr, td_death_bp_addr): No
4396 longer globals, moved to...
4397 (struct thread_db_info): ... this new structure.
4398 (thread_db_list): New.
4399 (add_thread_db_info, get_thread_db_info, delete_thread_db_info):
4401 (have_threads_callback): Filter out threads of all inferiors but
4402 the one specified by the ARGS argument.
4403 (have_threads): Add ptid argument specifying the inferior we're
4404 interested in. Handle it.
4405 (struct thread_get_info_inout): New.
4406 (thread_get_info_callback, thread_from_lwp): Adjust to use it.
4407 (thread_db_attach_lwp): Check that inferior of the passed in
4408 thread is using thread-db. Adjust.
4409 (enable_thread_event): Remove thread_agent parameter. Instead,
4410 get it from the per-inferior thread-db info.
4411 (dladdr_to_soname): Move higher up.
4412 (enable_thread_event_reporting): Adjust to use per-inferior
4414 (try_thread_db_load_1): Replace `handle' parameter by a
4415 thread_db_info parameter. Adjust to use per-inferior thread-db
4417 (try_thread_db_load): Adjust to use per-inferior thread-db info.
4418 (thread_db_load, disable_thread_event_reporting): Ditto.
4419 (check_for_thread_db): Remove conditional reporting of which
4420 libthread_db is in use.
4421 (thread_db_new_objfile): Add comment about inferior_ptid.
4422 (attach_thread): Adjust to use per-inferior thread-db info.
4423 (thread_db_detach): Adjust to use per-inferior thread-db info.
4424 Remove thread event breakpoints of the current inferior. Only
4425 unpush the thread-db target if there are no more processes using
4427 (check_event): Adjust to use per-inferior thread-db info.
4428 (thread_db_wait): Adjust to use per-inferior thread-db info. Only
4429 unpush the thread-db target if there are no more processes using
4431 (thread_db_mourn_inferior): Adjust to use per-inferior thread-db
4432 info. Mark breakpoints of the current inferior out before
4433 deleting them. Only unpush the thread-db target if there are no
4434 more processes using it.
4435 (find_new_threads_callback): Adjust to use per-inferior thread_db
4437 (thread_db_find_new_threads_1): Add new ptid argument. Adjust to
4438 use per-inferior thread-db info.
4439 (thread_db_find_new_threads): Adjust to use per-inferior thread-db
4441 (thread_db_get_thread_local_address): Adjust.
4442 (thread_db_get_ada_task_ptid): Adjust.
4443 * inf-ptrace.c (inf_ptrace_mourn_inferior): Only unpush the target
4444 if there no more processes left to debug.
4445 * thread.c (set_running, set_executing): Handle resuming all
4446 threads of a single inferior.
4447 * mi/mi-interp.c (mi_output_running_pid): New.
4448 (mi_inferior_count): New.
4449 (mi_on_resume): For backwards compatibility, if resuming all
4450 threads of an inferior, and there is only one inferior, output
4453 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
4455 * ada-lang.c (ada_find_any_type): Move check for primitive types ...
4456 (to_fixed_range_type): ... to here.
4458 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
4460 * ada-lang.c (desc_data_type): Remove, replace by ...
4461 (desc_data_target_type): ... this.
4462 (thin_data_pntr): Use desc_data_target_type instead of desc_data_type.
4463 (ada_is_array_descriptor_type): Likewise.
4464 (ada_type_of_array): Likewise.
4465 (ada_coerce_to_simple_array_type): Likewise.
4466 (ada_array_element_type): Likewise.
4468 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
4470 * ada-valprint.c (ada_val_print_1): Use val_print_string to print
4471 result of ada_vax_float_print_function inferior call.
4473 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
4475 * ada-lang.c (ada_coerce_to_simple_array_type): Reimplement to
4476 avoid creating a dummy value.
4478 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
4480 * p-valprint.c (pascal_val_print): Use extract_typed_address
4481 to extract reference value.
4483 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
4485 * doublest.c (NAN): Remove unused define.
4486 (extract_floating_by_length, deprecated_extract_floating): Remove.
4487 (store_floating_by_length, deprecated_store_floating): Remove.
4488 (extract_typed_floating): Do not call extract_floating_by_length.
4489 (store_typed_floating): Do not call store_floating_by_length.
4490 (convert_typed_floating): Remove redundant assertions.
4491 * doublest.h (deprecated_extract_floating): Remove.
4492 (deprecated_store_floating): Remove.
4493 * sh64-tdep.c (sh64_register_convert_to_raw): Call
4494 extract_typed_floating instead of deprecated_extract_floating.
4496 2009-05-18 Jon Beniston <jon@beniston.com>
4498 * MAINTAINERS: Add lm32 target.
4499 * Makefile.in: Add lm32 dependencies.
4500 * NEWS: Indicate lm32 is a new target.
4501 * configure.tgt: Add lm32 targets.
4502 * lm32-tdep.c: New file.
4504 2009-05-18 Pedro Alves <pedro@codesourcery.com>
4506 * corelow.c (core_open): Flush the register cache before doing
4507 anything with registers.
4509 2009-05-18 Pedro Alves <pedro@codesourcery.com>
4511 * inflow.h (our_process_group): Remove declaration.
4512 (inferior_process_group): Delete global variable declaration.
4513 (inferior_process_group): New function declaration.
4514 * inflow.c: Include observer.h.
4515 (inferior_ttystate, our_ttystate, tflags_inferior, tflags_ours):
4517 (struct terminal_info): New struct.
4518 (our_terminal_info): New global.
4519 (inferior_process_group): New function.
4520 (inferior_thisrun_terminal): Extend description comment.
4521 (gdb_has_a_terminal): Adjust to write to our_terminal_info fields
4523 (terminal_init_inferior_with_pgrp): Adjust to per-inferior
4525 (terminal_inferior): Ditto.
4526 (terminal_ours_1): Ditto.
4527 (inflow_new_inferior, inflow_inferior_exit): New functions.
4528 (child_terminal_info): Adjust to per-inferior terminal settings.
4529 (osig_set): New global.
4530 (set_sigint_trap): Adjust to per-inferior terminal settings. Set
4531 or clear `osig_set' accordingly.
4532 (clear_sigint_trap): Check `osig_set' to decide wheater to restore
4533 SIGINT handler, instead of checking the current inferior (which
4535 (_initialize_inflow): Attach inflow_new_inferior and
4536 inflow_inferior_exit to the "new_inferior" and "inferior_exit"
4537 notifications, respectively.
4538 * inferior.h (struct terminal_info): Forward declare.
4539 (struct inferior): Add `terminal_info' field.
4540 * inferior.c (delete_inferior_1): Notify the inferior_exit
4541 observers before removing the inferior from the lists and deleting
4543 * inf-ptrace.c (inf_ptrace_stop): `inferior_process_group' is now
4544 a function instead of a variable. Adjust.
4545 * procfs.c (procfs_stop): Ditto.
4547 2009-05-17 Pedro Alves <pedro@codesourcery.com>
4549 * infrun.c (handle_inferior_event): When handling a
4550 TARGET_WAITKIND_FORKED, detach breakpoints from the fork child
4552 * linux-nat.c (linux_child_follow_fork): Only detach breakpoints
4553 from the child if vforking.
4554 * inf-ptrace.c (inf_ptrace_follow_fork): No need to detach
4555 breakpoints from the child here.
4557 2009-05-17 Pedro Alves <pedro@codesourcery.com>
4559 * infrun.c (pending_follow): Remove execd_pathname member.
4560 (resume): No longer handle TARGET_WAITKIND_EXECD pending follow.
4561 (handle_inferior_event): When handling a TARGET_WAITKIND_EXECD
4562 event, don't copy `execd_pathname' to pending_follow, use the
4563 event copy instead. Release `execd_pathname' once done with
4566 * infrun.c (pending_follow): Remove mention of exec events.
4568 2009-05-17 Hui Zhu <teawater@gmail.com>
4570 * i386-tdep.c (i386_process_record): Make it extern.
4571 (i386_gdbarch_init): Don't call set_gdbarch_process_record
4573 * i386-tdep.h (i386_process_record): Declare.
4574 * i386-linux-tdep.c (i386_linux_init_abi): Call
4575 set_gdbarch_process_record.
4577 2009-05-17 Vladimir Prus <vladimir@codesourcery.com>
4579 Always report varobj as changed when in_scope attribute changes.
4581 * varobj.c (install_new_value): If non-NULL-ness of value
4584 2009-05-15 Paul Pluzhnikov <ppluzhnikov@google.com>
4586 * NEWS: Mention set/show libthread-db-search-path.
4587 * gdb_thread_db.h (LIBTHREAD_DB_SEARCH_PATH): New define.
4588 (LIBTHREAD_DB_SO): Moved from linux-thread-db.c
4589 * linux-thread-db.c (libthread_db_search_path): New setting.
4590 (thread_db_handle): New variable (replaces using_thread_db).
4591 (try_thread_db_load_1): New function.
4592 (try_thread_db_load, thread_db_load_search): Likewise.
4593 (dladdr_to_soname): Likewise.
4594 (thread_db_load): Iterate over possibly multiple libthread_db's.
4595 (check_for_thread_db): Attempt to load new libthread_db.
4596 (thread_db_detach, thread_db_wait): Unload libthread_db.
4597 (thread_db_mourn_inferior): Likewise.
4598 (_initialize_thread_db): Add new libthread-db-search-path option.
4599 Defer loading of libthread_db to check_for_thread_db.
4600 * solib.c (libpthread_name_p): New function.
4601 (libpthread_solib_p): Call it.
4602 * solib.h (libpthread_name_p): New prototype.
4604 2009-05-15 Pierre Muller <muller@ics.u-strasbg.fr>
4606 * MAINTAINERS: Update my email address.
4608 2009-05-14 Paul Pluzhnikov <ppluzhnikov@google.com>
4610 * breakpoint.h: Add breakpoint_re_set_objfile prototype.
4611 * breakpoint.c (create_overlay_event_breakpoint): Renamed
4612 from create_overlay_event_breakpoint_1, old
4613 create_overlay_event_breakpoint deleted.
4614 (breakpoint_re_set_objfile): Don't rescan all objfiles
4616 (breakpoint_re_set): New function.
4617 * symfile.c (new_symfile_objfile): Call breakpoint_re_set_objfile
4618 instead of breakpoint_re_set.
4619 * objfiles.c (objfile_relocate): Likewise.
4621 2009-05-14 Joel Brobecker <brobecker@adacore.com>
4623 * gdbarch.sh: Add comment documenting the target_gdbarch global.
4624 gdbarch.h does NOT need to be regenerated as the corresponding
4625 change has already been made in a previous commit.
4627 2009-05-14 Pierre Muller <muller@ics.u-strasbg.fr>
4629 Remove all i386 debug register low level macros in config nm files.
4630 (I386_DR_LOW_SET_ADDR, I386_DR_LOW_RESET_ADDR): Remove.
4631 (I386_DR_LOW_GET_STATUS, I386_DR_LOW_SET_CONTROL): Remove.
4632 (I386_USE_GENERIC_WATCHPOIINTS): Remove.
4634 * i386-nat.h: New file (adapted from config/i386/nm-i386.h).
4635 (struct i386_dr_low_type): New type.
4636 (i386_dr_low): New global variable.
4637 * i386-nat.c (TARGET_HAS_DR_LEN_8): Update macro.
4638 (i386_insert_aligned_watchpoint): Replace i386 dr low macros by
4639 i386_dr_low struct variable fields.
4640 (i386_remove_aligned_watchpoint): Likewise.
4641 (i386_stopped_data_address): Likewise.
4642 (i386_stopped_by_hwbp): Likewise.
4643 (show_debug_regs_command_added): New static variable.
4644 (add_show_debug_regs_command): New static function.
4645 (i386_use_watchpoints): Call add_show_debug_regs_command if not done.
4646 (i386_set_debug_register_length): New function.
4647 (_initialize_i386_nat): Delete.
4649 * amd64-linux-nat.c: Include "i386-nat.h".
4650 (amd64_linux_dr_set_control): Change to static.
4651 (amd64_linux_dr_get_status): Change to static.
4652 (amd64_linux_dr_set_addr,amd64_linux_dr_reset_addr): Likewise.
4653 (_initialize_amd64_linux_nat): Set i386_dr_low variable fields.
4655 * go32-nat.c: Include "i386-nat.h".
4656 (go32_set_addr): Change to static.
4657 (go32_set_dr7): Change to static. Change arg type to unisgned long.
4658 (go32_get_dr6): Change to static. Change return type to unisnged long.
4659 (init_go32_ops): Set i386_dr_low variable fields.
4660 * i386-linux-nat.c: Include "i386-nat.h".
4661 (i386_linux_dr_set_control, i386_linux_dr_get_status): Change to static.
4662 (i386_linux_dr_set_addr, i386_linux_dr_reset_addr): Idem.
4663 (_initialize_i386_linux_nat): Set i386_dr_low variable fields.
4664 * i386bsd-nat.h: Declare functions used for
4665 i386_dr_low fields in i386fbsd-nat.c.
4666 * i386fbsd-nat.c: Include "i386-nat.h".
4667 (_initialize_i386fbsd_nat): Set i386_dr_low variable fields.
4668 * windows-nat.c: Include "i386-nat.h".
4669 (cygwin_set_dr, cygwin_get_dr6, cygwin_set_dr7): Add prototypes.
4671 (cygwin_get_dr6): Change return type to unisnged long.
4672 (cygwin_set_dr7): Change arg type to unisgned long.
4673 (init_windows_ops): Set i386_dr_low function fields.
4675 * amd64-windows-nat.c (_initialize_amd64_windows_nat): Call
4676 i386_set_debug_register_length.
4677 * i386-windows-nat.c (_initialize_i386_windows_nat): Likewise.
4679 * config/i386/nm-cygwin.h: Remove all I386_* macros.
4680 * config/i386/nm-cygwin64.h: Likewise.
4681 * config/i386/nm-fbsd.h: Likewise.
4682 * config/i386/nm-linux.h: Likewise.
4683 * config/i386/nm-i386.h: Remove completely.
4684 * config/i386/nm-go32.h: Remove completely.
4685 * config/i386/nm-linux64.h: Remove completely.
4686 * config/i386/go32.mh (NAT_FILE): Remove entry.
4687 * config/i386/linux64.h (NAT_FILE): Change to config/nm-linux.h.
4689 2009-05-14 Jon Beniston <jon@beniston.com>
4691 * MAINTAINERS: Add Jon Beniston to write after approval list.
4693 2009-05-13 Paul Pluzhnikov <ppluzhnikov@google.com>
4695 * objc-lang.c (objc_objfile_data): New variable.
4696 (find_methods): Skip objfiles without Obj-C methods.
4697 (_initialize_objc_lang): New function.
4699 2009-05-13 Joel Brobecker <brobecker@adacore.com>
4701 * c-lang.c (print_wchar): Remove unnecessary cast.
4703 2009-05-12 Jim Blandy <jimb@red-bean.com>
4705 * MAINTAINERS: Remove self as m32c target maintainer.
4707 2009-05-12 Pedro Alves <pedro@codesourcery.com>
4709 * cli/cli-decode.c (deprecated_add_set_cmd): Delete.
4710 * command.h (deprecated_add_set_cmd): Delete declaration.
4711 * gnu-nat.c (_initialize_gnu_nat): Replace 'maint gnu-debug' with
4712 'set debug gnu-nat' and 'show debug gnu-nat'.
4713 * i386-nat.c (_initialize_i386_nat): Replace 'maint
4714 show-debug-registers' with 'maint set show-debug-registers' and
4715 'maint show show-debug-registers'.
4716 * mips-linux-nat.c (_initialize_mips_linux_nat): Replace 'maint
4717 show-debug-registers' with 'maint set show-debug-registers' and
4718 'maint show show-debug-registers'.
4720 2009-05-12 Joel Brobecker <brobecker@adacore.com>
4722 * c-lang.c (print_wchar): Convert w into a gdb_wchar_t before
4723 pushing it on the output obstack.
4725 2009-05-11 Joel Brobecker <brobecker@adacore.com>
4727 Fix internal error on breaking at a multi-locations caller source line.
4728 * breakpoint.c (parse_breakpoint_sals): Set EXPLICIT_PC for the `break'
4729 command with no parameters.
4731 2009-05-11 Pedro Alves <pedro@codesourcery.com>
4733 * linux-nat.c (enum sigchld_state): Delete.
4734 (linux_nat_async_events_state): Delete.
4735 (struct waitpid_result): Delete.
4736 (waitpid_queue): Delete.
4737 (queued_waitpid_1): Delete.
4738 (async_file_flush): New.
4739 (queued_waitpid, push_waitpid): Delete.
4740 (async_file_mark): New.
4741 (drain_queued_events): Delete.
4742 (my_waitpid): Remove locally queued events handling.
4743 (linux_test_for_tracefork): Upjust.
4744 (linux_child_follow_fork): Ditto.
4745 (sync_sigchld_action): Delete.
4746 (blocked_mask): Reinstate.
4747 (async_sigchld_action): Rename to...
4748 (sigchld_action): ... this.
4749 (block_child_signals): New.
4750 (restore_child_signals_mask): New.
4751 (lin_lwp_attach_lwp): Adjust.
4752 (linux_nat_create_inferior): Ditto.
4753 (linux_nat_attach): Also use lp->status in async mode.
4754 (get_pending_status): Don't use queued_waitpid.
4755 (linux_nat_detach): Don't drain locally queued events.
4756 (linux_nat_resume): Allow pending wait statuses stored lp->status
4757 in async mode. If returning early due to a pending event,
4758 re-register the event source.
4759 (stop_wait_callback): Allow pending wait statuses stored
4760 lp->status in async mode.
4761 (pipe_to_local_event_queue, local_event_queue_to_pipe): Delete.
4762 (linux_nat_wait): Rename to ...
4763 (linux_nat_wait_1): ... this. Allow pending wait statuses stored
4764 lp->status in async mode. Always add WNOHANG to the waitpid
4765 options in async mode.
4766 (linux_nat_wait): New.
4767 (kill_callback): Don't drain locally queued events.
4768 (sigchld_handler): Rewrite.
4769 (linux_nat_is_async_p, linux_nat_can_async_p): Fix comments to
4770 refer to "set target-async".
4771 (linux_nat_async_mask): If in non-stop, and re-enabling async
4772 mode, re-register the target event source in the event loop.
4773 (linux_nat_event_pipe_pop, linux_nat_event_pipe_push)
4774 (get_pending_events, async_sigchld_handler)
4775 (linux_nat_async_events): Delete.
4776 (handle_target_event): New.
4777 (linux_nat_async_file_handler): Delete.
4778 (linux_async_pipe): New.
4779 (linux_nat_async): Only re-register in the event loop if not
4780 registered yet. Always notify the event-loop once if enabling the
4782 (linux_nat_stop_lwp): Rewrite to handle pending events stored in
4783 lp->status, not in the locally queued event list.
4784 (linux_nat_stop): Don't mask out async event handling.
4785 (linux_nat_setup_async): Delete.
4786 (_initialize_linux_nat): Adjust.
4787 (lin_thread_get_thread_signals): blocked_mask is global again.
4790 2009-05-11 Pierre Muller <muller@ics.u-strasbg.fr>
4792 Unify target macros.
4794 * target.h (STOPPED_BY_WATCHPOINT): Delete, replaced by ...
4795 (target_stoppped_by_watchpoint): New macro.
4796 (HAVE_STEPPABLE_WATCHPOINT): Delete, replaced by ...
4797 (target_have_steppable_watchpoint): New macro.
4798 (HAVE_CONTINUABLE_WATCHPOINT): Delete, replace by ...
4799 (target_have_continuable_watchpoint): New macro.
4800 (TARGET_CAN_USE_HARDWARE_WATCHPOINT):Delete, replaced by ...
4801 (target_can_use_hardware_watchpoint): New macro.
4802 (TARGET_REGION_OK_FOR_HW_WATCHPOINT):Delete, replaced by ...
4803 (target_region_ok_for_hw_watchpoint): New macro.
4805 * breakpoint.c (update_watchpoint): Use new macros.
4806 (bpstat_alloc): Likewise.
4807 (create_breakpoint): Likewise.
4808 (watch_command_1): Likewise.
4809 (can_use_hardware_watchpoint): Likewise.
4810 (do_enable_breakpoint): Likewise.
4811 * infrun.c (handle_inferior_event): Adapt to new macros.
4812 * mips-tdep.c (mips_gdbarch_init): Update comments.
4813 * procfs.c (procfs_set_watchpoint): Update comment.
4814 (procfs_insert_watchpoint): Adapt to new macros.
4815 * remote-m32r-sdi.c (m32r_stop):
4816 * remote-mips.c (mips_remove_breakpoint):
4817 * target.c (debug_to_region_ok_for_hw_watchpoint): Update to new macros.
4818 (debug_to_stopped_by_watchpoint): Likewise.
4821 2009-05-10 Pierre Muller <muller@ics.u-strasbg.fr>
4823 * src/gdb/target.h: Remove all tests for already defined
4824 macros. All macros defined here should not be set in config
4827 2009-05-08 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
4829 * ppc-linux-nat.c (have_ptrace_getsetregs): New variable.
4830 (have_ptrace_getsetfpregs): Likewise.
4831 fetch_all_gp_regs): New function.
4832 (fetch_gp_regs): New function.
4833 (fetch_all_fp_regs): Likewise.
4834 (fetch_fp_regs): New function.
4835 (fetch_ppc_registers): Using the new methods to fetch general-
4836 purpose and floating-pointer registers.
4837 (store_all_gp_regs): New function.
4838 (store_gp_regs): Likewise.
4839 (store_all_fp_regs): New function.
4840 (store_fp_regs): Likewise.
4841 (store_ppc_registers): Using the new methods to store general-
4842 purpose and floating-pointer registers.
4844 2009-05-08 Doug Evans <dje@google.com>
4846 * linux-nat.c (linux_xfer_siginfo): Delete unused locals lp, n.
4848 2009-05-07 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
4850 * MAINTAINERS (Write After Approval): Add self.
4852 2009-05-07 Joel Brobecker <brobecker@adacore.com>
4854 * gdbarch.h (target_gdbarch): Add comment documenting this global.
4856 2009-05-06 Joel Brobecker <brobecker@adacore.com>
4858 * acinclude.m4 (AM_ICONV): Prefer in-tree libiconv if present over
4860 * configure: Regenerate.
4862 2009-05-06 Joel Brobecker <brobecker@adacore.com>
4864 * utils.c: Add include of gdb_usleep.h.
4865 (defaulted_query): Detect false EOF conditions that happen
4866 on terminals opened with the O_NONBLOCK flag when there is
4869 2009-05-06 Pedro Alves <pedro@codesourcery.com>
4871 * inferior.c (add_inferior): Move observer_notify_new_inferior
4873 (add_inferior_silent): ... here.
4875 2009-05-06 Pierre Muller <muller@ics.u-strasbg.fr>
4876 Pedro Alves <pedro@codesourcery.com>
4878 * procfs.c (procfs_insert_watchpoint, procfs_remove_watchpoint)
4879 (procfs_region_ok_for_hw_watchpoint, procfs_use_watchpoints): New
4881 (procfs_stopped_by_watchpoint): Made static, ptid argument
4883 (_initialize_procfs): Register new watchpoint related target
4885 * config/i386/nm-i386sol2.h (TARGET_CAN_USE_HARDWARE_WATCHPOINT)
4886 (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT, STOPPED_BY_WATCHPOINT)
4887 (HAVE_CONTINUABLE_WATCHPOINT): Delete.
4888 (target_insert_watchpoint, target_remove_watchpoint): Delete.
4889 (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete
4891 * config/mips/nm-irix5.h (STOPPED_BY_WATCHPOINT)
4892 (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT): Delete.
4893 (target_insert_watchpoint, target_remove_watchpoint): Delete.
4894 (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete
4896 * config/sparc/nm-sol2.h (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT)
4897 (HAVE_CONTINUABLE_WATCHPOINT, STOPPED_BY_WATCHPOINT): Delete.
4898 (target_insert_watchpoint, target_remove_watchpoint): Delete.
4899 (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete
4902 2009-05-06 Hui Zhu <teawater@gmail.com>
4904 * i386-tdep.c (i386_process_record): Change bzero to memset.
4906 2009-05-06 Hui Zhu <teawater@gmail.com>
4908 * NEWS: Add item for process record and replay.
4910 2009-05-05 Maxim Grigoriev <maxim2405@gmail.com>
4912 * xtensa-tdep.c (xtensa_frame_cache): Use pc instead of cache->pc.
4914 2009-05-05 Ulrich Weigand <uweigand@de.ibm.com>
4916 * inferior.h (read_pc, write_pc): Remove.
4917 * regcache.c (read_pc, write_pc): Remove.
4919 * infrun.c (displaced_step_fixup): Use regcache_read_pc instead
4921 (handle_inferior_event): Use regcache_read_pc instead of read_pc
4922 when determining value of stop_pc. Replace subsequent uses of
4923 read_pc by inspecting already-retrieved stop_pc value.
4924 (keep_going): Use regcache_read_pc instead of read_pc.
4926 * breakpoint.c (watchpoint_check): Use current frame architecture
4927 and PC instead of current_gdbarch and read_pc ().
4928 * tracepoint.c (set_traceframe_context): Replace PC argument
4929 with FRAME argument.
4930 (trace_start_command, finish_tfind_command): Update calls.
4931 (finish_tfind_command): Compare frame IDs to identify transitions
4933 (trace_find_pc_command): Use regcache_read_pc instead of read_pc.
4934 * rs6000-nat.c (exec_one_dummy_insn): Pass in regcache instead
4935 of gdbarch. Use regcache_read_pc and regcache_write_pc instead
4936 of read_pc and write_pc.
4937 (store_register): Make regcache argument non-const. Update call
4938 to exec_one_dummy_insn.
4940 * thread.c (switch_to_thread): Use regcache_read_pc instead of read_pc.
4941 * infcmd.c (post_create_inferior): Likewise.
4942 * solib-darwin.c (darwin_solib_create_inferior_hook): Likewise.
4943 * solib-pa64.c (pa64_solib_create_inferior_hook): Likewise.
4944 * solib-sunos.c (sunos_solib_create_inferior_hook): Likewise.
4945 * solib-svr4.c (enable_break, svr4_relocate_main_executable): Likewise.
4946 * linux-fork.c (fork_load_infrun_state): Likewise.
4947 * hppa-hpux-tdep.c (hppa_hpux_push_dummy_code): Likewise.
4948 * record.c (record_wait): Likewise.
4949 * procfs.c (procfs_wait): Likewise.
4950 * remote-mips.c (common_open, mips_wait): Likewise.
4951 * remote-m32r-sdi.c (m32r_resume): Likewise.
4953 * symfile.c (generic_load): Use regcache_write_pc instead of write_pc.
4954 * monitor.c (monitor_create_inferior, monitor_load): Likewise.
4955 * m32r-rom.c (m32r_load, m32r_upload_command): Likewise.
4956 * remote-m32r-sdi.c (m32r_create_inferior, m32r_load): Likewise.
4957 * remote-mips.c (mips_create_inferior, mips_load): Likewise.
4959 * solib-darwin.c: Include "regcache.h".
4960 * solib-pa64.c: Include "regcache.h".
4961 * solib-svr4.c: Include "regcache.h.".
4963 * symfile.c: Do not mention read_pc or write_pc in comments.
4964 * dink32-rom.c: Likewise.
4965 * m32r-rom.c: Likewise.
4966 * mips-tdep.c: Likewise.
4968 2009-05-05 Ulrich Weigand <uweigand@de.ibm.com>
4970 * fork-child.c (startup_inferior): Move setting stop_pc ...
4971 * infcmd.c (post_create_inferior): ... to here.
4973 2009-05-04 Michael Snyder <msnyder@vmware.com>
4975 * NEWS: Add item for reverse debugging commands.
4977 2009-05-04 Pedro Alves <pedro@codesourcery.com>
4979 * go32-nat.c (go32_stop): Delete.
4980 (go32_kill_inferior): Rewrite to only call go32_mourn_inferior.
4981 (go32_create_inferior): Don't call go32_stop or
4983 (go32_mourn_inferior): Inline go32_stop and go32_kill_inferior
4985 (init_go32_ops): Don't register go32_stop.
4987 2009-05-02 Eli Zaretskii <eliz@gnu.org>
4989 * dbxread.c (read_dbx_symtab): Avoid compiler warnings for
4992 * infcall.c (find_function_addr): Avoid compiler warnings for
4995 2009-05-01 Jan Kratochvil <jan.kratochvil@redhat.com>
4997 * dictionary.c (dict_hashed_vector, dict_hashed_expandable_vector)
4998 (dict_linear_vector, dict_linear_expandable_vector): Fix a comment typo.
5000 2009-05-01 Doug Evans <dje@google.com>
5002 * linux-thread-db.c (thread_db_pid_to_str): Delete unused assignment
5005 2009-05-01 Eli Zaretskii <eliz@gnu.org>
5007 * record.c (_initialize_record): Reformat and clarify doc strings
5008 for stop-at-limit and insn-number-max.
5010 * go32-nat.c: Add comments about dirty secrets of DJGPP debugging.
5012 2009-05-01 Jan Kratochvil <jan.kratochvil@redhat.com>
5014 Make specifiable the make_function_type type memory ownership.
5015 * gdbtypes.c (make_function_type): New parameter `objfile', use it
5016 explicitely instead of TYPE-initialized removed local variable
5017 `objfile'. Describe `objfile' it in the function comment.
5018 (lookup_function_type): Update make_function_type callers.
5019 * gdbtypes.h (make_function_type): Update the prototype.
5020 * jv-lang.c (java_link_class_type): Update make_function_type callers.
5021 * dwarf2read.c (read_subroutine_type): Likewise.
5022 * stabsread.c (read_type): Likewise.
5024 2009-05-01 Eli Zaretskii <eliz@gnu.org>
5026 * go32-nat.c (go32_pid_to_str): Call normal_pid_to_str instead of
5027 printing a bogus "Thread <main>".
5028 (go32_thread_alive): Don't return 1 for null_ptid.
5030 * i386-tdep.c (i386_go32_init_abi): Override the number of
5031 registers due to non-support of SSE.
5033 2009-04-30 Anthony Green <green@moxielogic.com>
5035 * configure.tgt: Link the moxie simulator in with gdb.
5037 2009-04-30 Paul Pluzhnikov <ppluzhnikov@google.com>
5039 * elfread.c (elf_symtab_read): Don't assume .data and .rodata
5042 2009-04-30 Hui Zhu <teawater@gmail.com>
5043 Michael Snyder <msnyder@vmware.com>
5045 I386 Linux process record and replay support.
5047 * i386-linux-tdep.c (i386_linux_record_tdep): New variable.
5048 This struct has the argument for the function
5049 "record_linux_system_call".
5050 (i386_linux_intx80_sysenter_record): New function. Parse the
5051 system call instruction and call function
5052 "record_linux_system_call" to record execute log.
5053 (i386_linux_init_abi): Initialize "i386_linux_record_tdep".
5054 Set "i386_linux_intx80_sysenter_record" to
5055 "i386_intx80_record" and "i386_sysenter_record".
5057 2009-04-30 Hui Zhu <teawater@gmail.com>
5058 Michael Snyder <msnyder@vmware.com>
5060 I386 architecture process record and replay support.
5062 * i386-tdep.c (PREFIX_REPZ, PREFIX_REPNZ, PREFIX_LOCK,
5063 PREFIX_DATA, PREFIX_ADDR): New macros. Help decode the i386
5065 (aflag, dflag, override, modrm, mod, reg, rm, ot,
5066 i386_record_pc): New variables. Ditto.
5067 (i386_record_modrm, i386_record_lea_modrm_addr,
5068 i386_record_lea_modrm): New functions. Ditto.
5069 (i386_process_record): New function. Parse the instruction in
5070 address "addr" and record the values of registers and memory
5071 that will be changed by this instruction.
5072 (i386_gdbarch_init): Set "i386_process_record" to GDBARCH
5073 "process_record" interface.
5074 * i386-tdep.h (gdbarch_tdep): New function pointers
5075 "i386_intx80_record" and "i386_sysenter_record" that point to
5076 the function that can record "intx80" and "sysenter" execute
5079 2009-04-30 Hui Zhu <teawater@gmail.com>
5080 Michael Snyder <msnyder@vmware.com>
5082 * infrun.c (use_displaced_stepping): Return false if process
5083 record and replay target is used.
5084 (proceed): Call function "record_not_record_set" if pocess
5085 record and replay target is used.
5087 2009-04-30 Hui Zhu <teawater@gmail.com>
5088 Michael Snyder <msnyder@vmware.com>
5090 Linux process record and replay support.
5092 * Makefile.in (ALLDEPFILES): Add linux-record.c.
5093 (ALL_TARGET_OBS): Add linux-record.o.
5094 * configure.tgt (x86_64-*-linux*): Add linux-record.o.
5095 (i[34567]86-*-linux*): Add linux-record.o.
5096 * linux-record.c, linux-record.h: New file.
5098 2009-04-30 Hui Zhu <teawater@gmail.com>
5099 Michael Snyder <msnyder@vmware.com>
5101 Process record and replay target.
5103 * Makefile.in (SFILES): Add record.c.
5104 (COMMON_OBS): Add record.o.
5105 * record.c, record.h: New file.
5107 2009-04-30 Hui Zhu <teawater@gmail.com>
5108 Michael Snyder <msnyder@vmware.com>
5110 * target.h (strata): New stratum "record_stratum".
5112 2009-04-30 Hui Zhu <teawater@gmail.com>
5113 Michael Snyder <msnyder@vmware.com>
5115 GDBARCH interface for process record and replay.
5117 * gdbarch.sh (process_record): This interface point to the
5118 function that records the inferior execute log.
5120 2009-04-29 Doug Evans <dje@google.com>
5122 * i386-nat.c (child_post_startup_inferior): Delete, unused.
5124 2009-04-29 Pedro Alves <pedro@codesourcery.com>
5126 * breakpoint.c (print_exception_catchpoint): Access `b' directly
5127 instead of `b->loc->owner'.
5128 (print_mention_exception_catchpoint): Ditto.
5130 2009-04-29 Jan Kratochvil <jan.kratochvil@redhat.com>
5132 * macrocmd.c (info_macro_command): Print -Dname=value if LINE is zero.
5134 2009-04-27 Tom Tromey <tromey@redhat.com>
5136 * c-exp.y (yylex): Handle '[' and ']' like '(' and ')'.
5138 2009-04-27 Jerome Guitton <guitton@adacore.com>
5140 * symtab.c (append_exact_match_to_sals): New function, extracted
5141 from expand_line_sal.
5142 (expand_line_sal): Use append_exact_match_to_sals to append exact
5143 matches. If none found, append all best items.
5145 2009-04-27 Jerome Guitton <guitton@adacore.com>
5147 * main.c (captured_main): Move gdbinit lookups after gdb_init.
5149 2009-04-27 Jan Kratochvil <jan.kratochvil@redhat.com>
5152 * dwarf2read.c (unsigned_int_compar, inherit_abstract_dies): New.
5153 (read_func_scope): Call inherit_abstract_dies.
5155 2009-04-25 Eli Zaretskii <eliz@gnu.org>
5157 * Makefile.in (ALLDEPFILES): Remove duplicate entries for
5158 sparc-sol2-nat.c and sparc-sol2-tdep.c.
5160 * stack.c (_initialize_stack) <disassemble-next-line>: Doc fix.
5162 2009-04-24 Pierre Muller <muller@ics.u-strasbg.fr>
5164 ARI change: Use "/* ARI: rule */" pattern.
5165 * utils.c: Update ARI patterns.
5166 * gdb_dirent.h: Likewise.
5168 2009-04-23 Anthony Green <green@moxielogic.com>
5170 * MAINTAINERS: Add moxie target.
5171 * configure.tgt: Add moxie-*-elf target.
5172 * moxie-tdep.c: New file.
5173 * moxie-tdep.h: New file.
5175 2009-04-23 Joel Brobecker <brobecker@adacore.com>
5177 * ada-lang.c: Remove an extra empty line. No code change.
5179 2009-04-23 Jan Kratochvil <jan.kratochvil@redhat.com>
5181 Fix double free on error inserting the breakpoint instruction.
5182 * breakpoint.c (create_breakpoints): Move the
5183 update_global_location_list call to ...
5184 (break_command_really): ... here together with the second local call
5185 both unified after all the cleanups.
5187 2009-04-23 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
5188 Tom Tromey <tromey@redhat.com>
5190 * configure, config.in: Regenerate.
5191 * configure.ac: Support for relocatable GDB datadir. Use
5192 GDB_AC_WITH_DIR. Always define TARGET_SYSTEM_ROOT_RELOCATABLE.
5193 * acinclude.m4 (GDB_AC_WITH_DIR): New defun.
5194 * top.c (init_main): Add "set data-directory".
5195 * defs.h (gdb_datadir): Declare.
5196 * main.c (gdb_datadir): New global.
5197 (captured_main): Initialize gdb_datadir. Use relocate_directory.
5198 (relocate_path): New function.
5199 (relocate_directory): Likewise.
5200 (get_init_files): Use relocate_path.
5201 (README): Mention --with-gdb-datadir.
5203 2009-04-23 Joel Brobecker <brobecker@adacore.com>
5205 * ada-tasks (task_command_1): Call target_find_new_threads.
5207 2009-04-23 Joel Brobecker <brobecker@adacore.com>
5209 * stack.c (do_gdb_disassembly): Print the exception message if an
5210 error was thrown while trying to perform the disassembly.
5212 2009-04-22 Jan Kratochvil <jan.kratochvil@redhat.com>
5214 * varobj.c (free_variable): Replace free_current_contents by xfree.
5216 2009-04-22 Kazu Hirata <kazu@codesourcery.com>
5218 * arm-linux-nat.c (fetch_register, store_register): Use
5219 ARM_CPSR_GREGNUM instead of ARM_CPSR_REGNUM.
5220 * arm-linux-tdep.c (arm_linux_supply_gregset,
5221 arm_linux_collect_gregset): Likewise.
5222 * arm-linux-tdep.h (ARM_CPSR_GREGNUM): New.
5223 * arm-tdep.h (ARM_CPSR_REGNUM): Remove.
5225 2009-04-22 Hui Zhu <teawater@gmail.com>
5227 * stack.c (_initialize_stack): Set the default of
5228 disassemble-next-line to off.
5230 2009-04-21 Tom Tromey <tromey@redhat.com>
5232 * acinclude.m4: Use AS_HELP_STRING, not AC_HELP_STRING.
5233 * configure.ac: Use AS_HELP_STRING, not AC_HELP_STRING.
5235 2009-04-21 Andreas Schwab <schwab@linux-m68k.org>
5237 * configure.ac: Add quotes to not lose brackets in help text.
5238 * configure: Rebuild.
5240 2009-04-21 Andreas Schwab <schwab@linux-m68k.org>
5242 * configure.ac: Don't postprocess Makefile in config.status.
5243 Substitute GDB_NM_FILE. Don't substitute nm_h.
5244 * Makefile.in (GDB_NM_FILE): Substitute.
5245 (TAGS): Use $(GDB_NM_FILE) instead of $(NAT_FILE).
5246 * configure: Regenerate.
5247 * gnulib/Makefile.in: Regenerate.
5249 2009-04-21 Joseph Myers <joseph@codesourcery.com>
5251 * configure.ac (--with-datarootdir, --with-docdir, --with-pdfdir,
5252 --with-htmldir): New.
5253 * configure: Regenerate.
5255 2009-04-21 Tom Tromey <tromey@redhat.com>
5257 * configure: Rebuild.
5258 * configure.ac: Use lower case for start of help strings. Clean
5259 up --with-sysroot help.
5261 2009-04-21 Tom Tromey <tromey@redhat.com>
5263 * configure: Rebuild.
5264 * acinclude.m4 (AM_ICONV): Use AC_HELP_STRING.
5265 * configure.ac: Use AC_HELP_STRING. Use upper case for variables
5268 2009-04-21 Pierre Muller <muller@ics.u-strasbg.fr>
5270 ARI fix: remove "%p".
5271 * ia64-tdep.c (ia64_frame_this_id): Use host_address_to_string function.
5272 (ia64_sigtramp_frame_this_id): Ditto.
5273 (ia64_libunwind_frame_this_id): Ditto.
5274 (ia64_libunwind_sigtramp_frame_this_id): Ditto.
5275 * symmisc.c (maintenance_info_psymtabs): Ditto.
5277 2009-04-21 Joseph Myers <joseph@codesourcery.com>
5279 * configure.ac (--with-relocated-sources): New.
5280 * configure, config.in: Regenerate.
5281 * source.c (add_substitute_path_rule): Remove static.
5282 * source.h (add_substitute_path_rule): Declare.
5283 * main.c: Include "source.h".
5284 (captured_main): Add substitution rule if RELOC_SRCDIR.
5286 2009-04-21 Pierre Muller <muller@ics.u-strasbg.fr>
5288 * gnu-nat.h (proc_debug): Add missing continuation line in macro.
5290 2009-04-20 David Daney <ddaney@caviumnetworks.com>
5292 * NEWS: Mention MIPS/Linux hardware watchpoint support.
5294 2009-04-20 David Daney <ddaney@caviumnetworks.com>
5296 * mips-linux-nat.c (command.h, gdbcmd.h, gdb_assert.h): New #includes.
5297 (maint_show_dr, super_close): New variables.
5298 (super_fetch_registers, super_store_registers): Make static.
5299 (PTRACE_GET_WATCH_REGS, PTRACE_SET_WATCH_REGS, W_BIT, R_BIT, I_BIT)
5300 (W_MASK, R_MASK, I_MASK, IRW_MASK, MAX_DEBUG_REGISTER): Define.
5301 (pt_watch_style): Define new enum.
5302 (mips32_watch_regs, mips64_watch_regs, pt_watch_regs, mips_watchpoint):
5304 (watch_readback_valid, watch_readback, current_watches, watch_mirror):
5306 (get_irw_mask, get_reg_mask, get_num_valid, get_watchlo)
5307 (set_watchlo, get_watchhi, set_watchhi, mips_show_dr)
5308 (mips_linux_read_watch_registers, mips_linux_can_use_hw_breakpoint)
5309 (mips_linux_stopped_by_watchpoint, mips_linux_stopped_data_address)
5310 (type_to_irw, fill_mask, try_one_watch)
5311 (mips_linux_region_ok_for_hw_watchpoint, write_watchpoint_regs)
5312 (mips_linux_new_thread, populate_regs_from_watches)
5313 (mips_linux_insert_watchpoint, mips_linux_remove_watchpoint)
5314 (mips_linux_close): New functions.
5315 (_initialize_mips_linux_nat): Register watchpoint functions with
5316 the target_ops. Add show-debug-regs maintenance command.
5318 2009-04-20 David Daney <ddaney@caviumnetworks.com>
5320 * infrun.c (handle_inferior_event): Move gegisters_changed call down.
5322 2009-04-19 Pedro Alves <pedro@codesourcery.com>
5324 * NEWS: Mention gdbserver support for x86 Windows CE.
5326 2009-04-19 Eli Zaretskii <eliz@gnu.org>
5328 * config/djgpp/fnchange.lst: Fix typos.
5330 Set default host and target charsets in the DJGPP port.
5332 * config/djgpp/config.sed (am_cv_langinfo_codeset)
5333 (bash_cv_langinfo_codeset, ac_cv_header_nl_types_h): Set to "yes"
5334 in all configure scripts that define ac_cv_env_CPP_value.
5336 * go32-nat.c (dos_codepage, nl_langinfo): New functions.
5339 * config/djgpp/nl_types.h: New file.
5341 * config/djgpp/langinfo.h: New file.
5343 * config/i386/go32.mh (MH_CFLAGS): Add $(srcdir)/config/djgpp.
5345 2009-04-18 Carlos O'Donell <carlos@codesourcery.com>
5347 * Makefile.in (MAKEHTML): Set to makeinfo --html.
5348 (MAKEHTMLFLAGS): Set to empty.
5350 2009-04-18 Eli Zaretskii <eliz@gnu.org>
5352 * NEWS: Mention all new set/show commands added since GDB 6.8 was
5355 * go32-nat.c (go32_sysinfo): Check if the call to
5356 __dpmi_get_capabilities fills the buffer with information, and
5357 don't use the buffer if not.
5359 2009-04-17 Tom Tromey <tromey@redhat.com>
5361 * charset.c (_initialize_charset): Add special case for "646".
5363 2009-04-17 Carlos O'Donell <carlos@codesourcery.com>
5365 * configure.ac: AC_SUBST datarootdir, docdir, htmldir, pdfdir.
5366 * configure: Regenerate.
5367 * Makefile.in: Set datarootdir, docdir, htmldir, and pdfdir from
5368 configure substitutions.
5369 (FLAGS_TO_PASS): Add datarootdir, docdir, and htmldir.
5371 2009-04-17 Pierre Muller <muller@ics.u-strasbg.fr>
5373 ARI fix: Do not use %p, replace by call to host_address_to_string
5375 * darwin-nat.c (darwin_xfer_partial): Apply change.
5376 * gnu-nat.c (inf_continue, gnu_xfer_memory): Ditto.
5377 * gnu-nat.h (proc_debug): Ditto.
5378 * symmisc.c (maintenance_info_symtabs): Ditto.
5379 (maintenance_info_psymtabs): Ditto.
5380 * windows-nat.c (handle_load_dll): Ditto.
5381 (handle_unload_dll, info_w32_command, handle_exception): Ditto.
5382 * xtensa-tdep.c (xtensa_unwind_pc): Ditto.
5384 2009-04-17 Joseph Myers <joseph@codesourcery.com>
5386 * configure.tgt (i[34567]86-*-linux*): Use 64-bit configuration if
5387 --enable-64-bit-bfd.
5388 (sparc-*-linux*): Likewise.
5390 2009-04-17 Eli Zaretskii <eliz@gnu.org>
5392 * go32-nat.c (go32_sysinfo): Update list of Windows versions of
5395 2009-04-16 Pedro Alves <pedro@codesourcery.com>
5397 * remote.c (remote_query_attached): Fix pasto in packet_ok result
5400 2009-04-16 Joel Brobecker <brobecker@adacore.com>
5402 * procfs.c (solib_mappings_callback, find_memory_regions_callback):
5403 Revert the previous change. Might not be correct, actually.
5405 2009-04-16 Joel Brobecker <brobecker@adacore.com>
5407 * ada-lang.h (ada_adjust_exception_stop, ada_print_exception_stop)
5408 (ada_get_current_task, ada_print_exception_breakpoint_nontask)
5409 (ada_print_exception_breakpoint_task, ada_reset_thread_registers):
5410 Remove declaration. These are non-existent functions.
5412 2009-04-16 Joel Brobecker <brobecker@adacore.com>
5414 * procfs.c (solib_mappings_callback, find_memory_regions_callback):
5415 Fix a compilation warning on mips-irix due to casting from
5416 a pointer of different size.
5418 2009-04-16 Joel Brobecker <brobecker@adacore.com>
5420 * ada-lang.c (symtab_for_sym): Delete.
5421 (user_select_syms): Use sym->symtab instead of calling symtab_for_sym.
5423 2009-04-16 Joel Brobecker <brobecker@adacore.com>
5425 * ada-lang.c (extract_string): Delete.
5426 (ada_main_name): Reimplement using target_read_string instead of
5429 2009-04-16 Andreas Schwab <schwab@linux-m68k.org>
5431 * m68klinux-nat.c: Remove obsolete comment.
5432 (fetch_register, store_register): Don't call
5433 gdbarch_cannot_fetch_register or gdbarch_cannot_store_register,
5434 which are always nops here.
5436 2009-04-14 Tom Tromey <tromey@redhat.com>
5438 * c-lang.c (c_emit_char): Use INTERMEDIATE_ENCODING.
5439 (c_printstr): Likewise.
5440 * charset.c: Include gdb_wait.h.
5441 (make_wchar_iterator): Use INTERMEDIATE_ENCODING.
5442 (find_charset_names): Use pexecute. Handle libiconv's output.
5444 (_initialize_charset): Use xstrdup.
5445 * gdb_wchar.h: Check HAVE_BTOWC. Split PHONY_ICONV and wchar
5447 (INTERMEDIATE_ENCODING): New define.
5448 * configure, config.in: Rebuild.
5449 * configure.ac: Check for btowc.
5451 2009-04-15 Tom Tromey <tromey@redhat.com>
5453 * c-lang.c (evaluate_subexp_c): Correctly handle EVAL_SKIP.
5455 2009-04-15 Eli Zaretskii <eliz@gnu.org>
5457 * utils.c (parse_escape): Initialize target_char to pacify GCC.
5459 2009-04-14 Jan Kratochvil <jan.kratochvil@redhat.com>
5461 * c-lang.c (c_get_string): Fix xfree crash on a failed string read.
5463 2009-04-14 Pierre Muller <muller@ics.u-strasbg.fr>
5465 ARI fix: sprintf rule.
5466 * ada-exp.y (convert_char_literal): Replace sprintf by xsnprintf.
5467 * ada-lang.c (add_angle_brackets): Use xstrprintf.
5468 (ada_decode): Replace sprintf by xsnprintf.
5469 (find_old_style_renaming_symbol): Ditto.
5470 (ada_to_fixed_type_1, ada_enum_name): Ditto.
5473 2009-04-14 Joel Brobecker <brobecker@adacore.com>
5475 * target.c (target_mourn_inferior): Call bfd_cache_close_all
5476 after having executed the target mourn_inferior routine.
5478 2009-04-14 Eli Zaretskii <eliz@gnu.org>
5480 * config/djgpp/djconfig.sh (DEPDIR): Define to "_deps", if
5483 2009-04-13 David Daney <ddaney@caviumnetworks.com>
5485 * infrun.c (maybe_software_singlestep): New function.
5486 (resume): Call maybe_software_singlestep.
5487 (handle_inferior_event): Same.
5489 2009-04-13 Tom Tromey <tromey@redhat.com>
5491 * python/python-frame.c (frapy_richcompare): Return
5492 Py_NotImplemented, not an error. Handle Py_NE as well.
5494 2009-04-13 Eli Zaretskii <eliz@gnu.org>
5496 * charset.c (EILSEQ): Define if not defined by system headers.
5498 2009-04-11 Eli Zaretskii <eliz@gnu.org>
5500 * config/djgpp/config.sed: Tweak ac_config_files in intl/configure
5501 to be consistent with renaming config.intl.in into config_intl.in.
5503 * go32-nat.c (go32_attach, go32_detach): Fix prototypes to be
5504 consistent with the change from 2008-11-09.
5506 2009-04-10 Jan Kratochvil <jan.kratochvil@redhat.com>
5508 * gdbtypes.c: Remove excessive parentheses at the return keywords.
5509 * varobj.c (varobj_invalidate): Fix indentation.
5510 * varobj.c (varobj_invalidate): Fix formatting text width.
5512 2009-04-08 Vladimir Prus <vladimir@codesourcery.com>
5514 Implement -exec-jump.
5516 * mi/mi-cmds.h (mi_cmd_exec_jump): Declare.
5517 * mi/mi-main.c (mi_cmd_exec_jump): New.
5518 * mi/mi-cmds.c (mi_cmds): Register exec-jump.
5520 2009-04-07 Doug Evans <dje@google.com>
5522 * symfile.c (symbol_file_clear): Fix indentation.
5524 2009-04-06 Mark Kettenis <kettenis@gnu.org>
5526 * sparc64nbsd-nat.c (sparc64nbsd_supply_pcb): Fix comment.
5528 2009-04-03 Ulrich Weigand <uweigand@de.ibm.com>
5530 * ppc-linux-nat.c (ppc_linux_target_wordsize): New function.
5531 (ppc_linux_auxv_parse): New function.
5532 (ppc_linux_read_description): Use ppc_linux_target_wordsize.
5533 (_initialize_ppc_linux_nat): Install ppc_linux_auxv_parse.
5535 2009-04-03 Ulrich Weigand <uweigand@de.ibm.com>
5537 * spu-linux-nat.c (spu_bfd_open): Set filename of in-memory
5538 BFD to contents of SPU name note.
5539 (spu_symbol_file_add_from_memory): Call symbol_file_add_from_bfd
5540 with "from_tty" argument 1 instead of 0.
5542 2009-04-02 Jan Kratochvil <jan.kratochvil@redhat.com>
5545 (new_symbol <DW_TAG_variable> <!DW_AT_location> <DW_AT_external>):
5546 Create the symbol in local scope.
5547 * symtab.h (cu->list_in_scope <LOC_UNRESOLVED>): New comment part.
5549 2009-04-02 Keith Seitz <keiths@redhat.com>
5551 * stabsread.c (read_member_functions): GCC may emit an extra space
5552 at the end of the names "__base_ctor" and "__base_dtor"; so ignore
5553 whitespace when looking for these functions.
5555 2009-04-01 Joel Brobecker <brobecker@adacore.com>
5557 Change the default value for "set print frame-arguments" to scalars.
5559 * stack.c (print_frame_arguments): Set initial value to "scalars".
5561 2009-04-01 Aleksandar Ristovski <aristovski@qnx.com>
5563 * mips-tdep.c (mips_numeric_register_alieses): New definition.
5564 (mips_gdbarch_init): Add user registers from
5565 mips_numeric_register_aliases.
5567 2009-04-01 Joel Brobecker <brobecker@adacore.com>
5569 * linux-nat.c (linux_nat_filter_event): Minor comment reformatting.
5571 2009-04-01 Joel Brobecker <brobecker@adacore.com>
5573 * linux-nat.c (linux_nat_filter_events): Do not delete the lwp if
5574 this is the last one.
5576 2009-04-01 Pedro Alves <pedro@codesourcery.com>
5578 * remote.c (append_resumption): New.
5579 (remote_vcont_resume): Use it.
5581 2009-04-01 Joel Brobecker <brobecker@adacore.com>
5583 * windows-nat.c (+windows_get_ada_task_ptid): New function.
5584 (init_windows_ops): Set windows_ops.to_get_ada_task_ptid.
5586 2009-03-31 Daniel Jacobowitz <dan@codesourcery.com>
5587 Keith Seitz <keiths@redhat.com>
5588 Jan Kratochvil <jan.kratochvil@redhat.com>
5591 * Makefile.in (dbxread.o): Update.
5592 * dbxread.c (read_dbx_symtab): Use cp_canonicalize_string.
5593 * dwarf2read.c (GDB_FORM_cached_string): New.
5594 (read_partial_die): Use dwarf2_canonicalize_name.
5595 (dwarf2_linkage_name): Use dwarf2_name.
5596 (dwarf2_canonicalize_name): New.
5597 (dwarf2_name): Use dwarf2_canonicalize_name.
5598 (dwarf_form_name, dump_die): Handle GDB_FORM_cached_string.
5599 * stabsread.c (define_symbol, read_type): Use cp_canonicalize_string.
5600 * symtab.c (lookup_symbol_in_language): Canonicalize input before
5602 * cp-name-parser.y: operator() requires two parameters,
5603 according to libiberty.
5604 * minsyms.c (lookup_minimal_symbol): Canonicalize input
5608 2009-03-31 Joel Brobecker <brobecker@adacore.com>
5610 Provide support for (Ada) task-specific breakpoints.
5612 * ada-lang.h (ada_get_task_number): Add declaration.
5613 (breakpoint_ada_task_match): Delete declaration.
5614 * ada-tasks.c (ada_get_task_number): Make non-static.
5615 * breakpoint.h (struct breakpoint): Add field "task".
5616 * breakpoint.c (print_one_breakpoint_location): Add handling of
5617 task-specific breakpoints.
5618 (create_breakpoint, create_breakpoints, find_condition_and_thread):
5619 New parameter "task".
5620 (break_command_really): Update calls to find_condition_and_thread
5621 and create_breakpoints.
5622 (breakpoint_re_set_one): Update call to find_condition_and_thread.
5625 2009-03-31 Joel Brobecker <brobecker@adacore.com>
5627 * ada-tasks.c (short_task_info): Eliminate the "Running" task state.
5629 2009-03-31 Pedro Alves <pedro@codesourcery.com>
5631 * remote.c (remote_notice_new_inferior): Use ptid_is_pid. Check
5632 if the thread's ptid without a thread id field is in the list
5633 before calling thread_change_ptid.
5634 (extended_remote_attach_1): In non-stop mode, do not rely on
5635 querying the current thread, instead, query the thread list, and
5636 select the first thread of the process.
5637 * gdbthread.h (first_thread_of_process): Declare.
5638 * thread.c (first_thread_of_process): Define.
5640 2009-03-30 Stan Shebs <stan@codesourcery.com>
5642 Make tracepoints into a type of breakpoint.
5643 * breakpoint.h (enum bptype): Add bp_tracepoint.
5644 (struct breakpoint): Add fields step_count, pass_count, actions.
5645 (get_tracepoint, get_tracepoint_by_number): Declare.
5646 (all_tracepoints): Declare.
5647 * breakpoint.c: Include tracepoint.h, readline.h.
5648 (ALL_TRACEPOINTS): Move here from tracepoint.c.
5649 (tracepoint_count): Ditto.
5650 (should_be_inserted): GDB does not insert tracepoints itself.
5651 (print_it_typical): Add tracepoint case.
5652 (bpstat_what): Ditto.
5653 (print_one_breakpoint_location): Ditto, and add printing for
5654 pass count, step count, and action list.
5655 (user_settable_breakpoint): Add tracepoint case.
5656 (allocate_bp_location): Ditto.
5657 (set_breakpoint_location_function): Ditto.
5658 (disable_breakpoints_in_shlibs): Ditto.
5660 (break_command_really): Add argument traceflag, use to choose
5661 basic breakpoint type.
5662 (break_command_1): Pass extra argument.
5663 (set_breakpoint, handle_gnu_v3_exceptions): Ditto.
5664 (breakpoint_re_set_one): Add tracepoint case.
5665 (disable_command, enable_command): Ditto.
5666 (set_tracepoint_count): Move here from tracepoint.c.
5667 (trace_command): Move here from tracepoint.c and use
5668 break_command_really.
5669 (tracepoints_info): Move here from tracepoint.c and call
5671 (enable_trace_command): Move here from tracepoint.c and call
5673 (disable_trace_command): Move here from tracepoint.c and call
5675 (delete_trace_command): Move here from tracepoint.c and call
5677 (trace_pass_command): Move here from tracepoint.c.
5678 (get_tracepoint_by_number): Ditto.
5679 (tracepoint_save_command): Ditto.
5680 (get_tracepoint): New function.
5681 (all_tracepoints): New function.
5682 (_initialize_breakpoint): Move tracepoint init from tracepoint.c,
5683 deprecate "enable trace" and "disable trace" commands.
5684 * tracepoint.h (struct tracepoint): Remove.
5685 (tracepoint_chain): Remove decl.
5686 (deprecated_create_tracepoint_hook): Remove decl.
5687 (deprecated_delete_tracepoint_hook): Remove decl.
5688 (deprecated_modify_tracepoint_hook): Remove decl.
5689 (ALL_TRACEPOINTS, ALL_TRACEPOINTS_SAFE): Remove.
5690 (free_actions): Update signature.
5691 (validate_actionline): Update signature.
5692 (end_actions_pseudocommand): Declare.
5693 (while_stepping_pseudocommand): Declare.
5694 * tracepoint.c: Include breakpoint.h.
5695 (tracepoint_chain, tracepoint_count): Remove.
5696 (free_actions, make_cleanup_free_actions): Update signature.
5697 (trace_command, set_raw_tracepoint): Remove.
5698 (trace_mention): Remove.
5699 (tracepoints_info): Remove.
5700 (tracepoint_operation, map_args_over_tracepoints): Remove.
5701 (get_tracepoint_by_number): Remove.
5702 (enable_trace_command, disable_trace_command): Remove.
5703 (delete_trace_command, trace_pass_command): Remove.
5704 (trace_actions_command, read_actions): Update signature.
5705 (validate_actionline): Update signature, use bp loc.
5706 (encode_actions): Ditto.
5707 (download_tracepoint): New function, body of trace_start_command.
5708 (trace_start_command): Call it, use all_tracepoints.
5709 (tracepoint_save_command): Remove.
5710 (tracepoint_dump_command): Use get_tracepoint.
5711 (end_actions_pseudocommand): Make globally visible.
5712 (while_stepping_pseudocommand): Ditto.
5713 (_initialize_tracepoint): Move command definitions to breakpoint.c.
5715 2009-03-30 Thiago Jung Bauermann <bauerman@br.ibm.com>
5717 Expose frames to Python.
5718 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-frame.o.
5719 (SUBDIR_PYTHON_SRCS): Add python-frame.c.
5720 (python-frame.o): New target.
5721 * python/python-frame.c: New file.
5722 * python/python-internal.h (gdbpy_frames, gdbpy_newest_frame,
5723 gdbpy_frame_stop_reason_string, gdbpy_selected_frame,
5724 gdbpy_initialize_frames): New prototypes.
5725 * python/python.c (_initialize_python): Call gdbpy_initialize_frames.
5726 (GdbMethods): Add `selected_frame' and `frame_stop_reason_string'
5728 * stack.c (find_frame_funname): New function, factored out of
5730 (print_frame): Call find_frame_funname.
5731 * stack.h (find_frame_funname): Add prototype.
5733 2009-03-29 Thiago Jung Bauermann <bauerman@br.ibm.com>
5735 Remove unused value_object attribute `owned_by_gdb'.
5736 * python/python-value.c (value_object): Remove owned_by_gdb
5738 (valpy_dealloc): Remove reference to self->owned_by_gdb.
5739 (valpy_new): Likewise.
5740 (value_to_value_object): Likewise.
5742 2009-03-29 Thiago Jung Bauermann <bauerman@br.ibm.com>
5744 Change gdb.Value.address from a method to an attribute.
5745 * python/python-value.c (value_object): Add `address' element.
5746 (valpy_dealloc): Decrement reference to self->address if set.
5747 (valpy_new): Initialize val_obj->address.
5748 (valpy_address): Rename to ...
5749 (valpy_get_address): ... this. Change signature from method to
5750 attribute. Update self->address if not set.
5751 (value_to_value_object): Initialize val_obj->address.
5752 (value_object_getset): Add `address' element.
5753 (value_object_methods): Remove `address' element.
5755 2009-03-29 Andreas Schwab <schwab@linux-m68k.org>
5757 * observer.sh: Set LANG/LC_ALL to C, not c.
5759 2009-03-28 Kevin Buettner <kevinb@redhat.com>
5761 * mn10300-tdep.c (mn10300_gdbarch_init): For mn10300, by default,
5764 2009-03-28 Pedro Alves <pedro@codesourcery.com>
5766 * remote.c (remote_stop_ns): If multi-process extensions are off,
5767 and GDB is requesting the whole process to stop, sent "vCont;t",
5770 2009-03-28 Pedro Alves <pedro@codesourcery.com>
5772 * inf-loop.c (inferior_event_handler): Avoid calling is_running on
5775 2009-03-27 Eli Zaretskii <eliz@gnu.org>
5777 * config/djgpp/fnchange.lst: Update to fix ARI-reported problems.
5779 2009-03-26 Doug Evans <dje@google.com>
5781 * thread.c (do_restore_current_thread_cleanup): Redo test for
5782 whether to restore old->inferior_ptid.
5784 2009-03-26 Tom Tromey <tromey@redhat.com>
5786 * breakpoint.c (resolve_sal_pc): Preserve original line number
5787 when skipping prologue.
5789 2009-03-26 Doug Evans <dje@google.com>
5791 * thread.c (inferior_thread) Remove "extern" in definition.
5793 2009-03-26 Thiago Jung Bauermann <bauerman@br.ibm.com>
5795 Add gdb.Value.is_optimized_out attribute.
5796 * python/python-value.c (valpy_get_is_optimized_out): New
5798 (value_object_getset): New variable.
5799 (value_object_type): Initialize tp_getset element.
5801 2009-03-26 Joel Brobecker <brobecker@adacore.com>
5803 Recognize missing DW_AT_location as <value optimized out>.
5805 (new_symbol <DW_TAG_variable> <!DW_AT_location> <!DW_AT_external>):
5806 Call add_symbol_to_list.
5808 2009-03-25 Tom Tromey <tromey@redhat.com>
5810 * gdbtypes.h (CHECK_TYPEDEF): Don't yield a value.
5811 * stack.c (print_this_frame_argument_p): Use check_typedef.
5813 2009-03-25 Tom Tromey <tromey@redhat.com>
5815 * configure: Rebuild.
5816 * acinclude.m4 (AM_ICONV): Set am_cv_use_build_libiconv.
5817 Rearrange flags setting. Add comments.
5819 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
5821 * config/i386/nm-i386.h: Remove code within
5822 I386_WATCHPOINTS_IN_TARGET_VECTOR conditional.
5823 * config/i386/nm-cygwin.h: Remove I386_WATCHPOINTS_IN_TARGET_VECTOR
5825 * config/i386/nm-cygwin64.h: Ditto.
5826 * config/i386/nm-fbsd.h: Ditto.
5827 * config/i386/nm-go32.h: Ditto.
5828 * config/i386/nm-linux.h: Ditto.
5829 * config/i386/nm-linux64.h: Ditto.
5831 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
5833 ARI fix: "xasprintf" rule.
5834 * printcmd.c (sym_info): Replace xasprintf by xstrprintf.
5836 2009-03-25 Pedro Alves <pedro@codesourcery.com>
5838 * remote.c (remote_start_remote): In non-stop mode, call
5839 init_wait_for_inferior before adding threads and inferiors.
5841 2009-03-25 Joel Brobecker <brobecker@adacore.com>
5843 * breakpoint.c (breakpoint_thread_match): Split a large condition
5844 into several smaller conditions. No behavior change.
5846 2009-03-25 Pedro Alves <pedro@codesourcery.com>
5848 * infrun.c (infrun_thread_thread_exit): New.
5849 (_initialize_infrun): Attach it to the thread_exit observer.
5850 * thread.c (delete_thread_1): Always call the observer, passing it
5852 * mi/mi-interp.c (mi_thread_exit): Add "silent" parameter. If
5853 SILENT, return immediately.
5855 2009-03-25 Pedro Alves <pedro@codesourcery.com>
5857 * infrun.c (normal_stop): Use has_stack_frames instead of
5859 * mi/mi-main.c (mi_execute_command): Avoid calling inferior_thread
5860 when there is no thread selected.
5861 (mi_cmd_execute): Don't special case commands that can run without
5862 a valid selected thread.
5863 * top.c (execute_command): Don't special case commands that can
5864 run without a valid selected thread. Use has_stack_frames.
5865 * infcmd.c (ensure_valid_thread): New.
5866 (continue_1, step_1, jump_command, signal_command): Use it.
5867 (detach_command): Error out if there's no selected thread/inferior.
5868 * thread.c (print_thread_info): Allow having no thread selected.
5869 (switch_to_thread): Don't read the PC if there is no current thread.
5870 (do_restore_current_thread_cleanup): Don't record the current
5871 frame if there is no current thread.
5872 (make_cleanup_restore_current_thread): Don't read frame info if
5873 there is no selected thread.
5874 (_initialize_thread): Don't mark commands as
5875 "no_selected_thread_ok".
5876 * frame.c (get_current_frame): Error out if there is no valid
5878 (has_stack_frames): Return false if there is no valid
5880 * cli/cli-cmds.c (init_cli_cmds): Don't mark commands as
5881 "no_selected_thread_ok".
5882 * cli/cli-decode.c (set_cmd_no_selected_thread_ok)
5883 (get_cmd_no_selected_thread_ok): Delete.
5884 * cli/cli-decode.h (CMD_NO_SELECTED_THREAD_OK): Delete.
5885 (set_cmd_no_selected_thread_ok, get_cmd_no_selected_thread_ok):
5887 * stack.c (get_selected_block): Use has_stack_frames.
5889 2009-03-25 Thiago Jung Bauermann <bauerman@br.ibm.com>
5891 Fix size of FPSCR in Power 7 processors.
5892 * ppc-linux-nat.c (PPC_FEATURE_ARCH_2_05): Remove #define.
5893 (PPC_FEATURE_HAS_DFP): New #define.
5894 (ppc_linux_read_description): Check for DFP feature instead of
5895 ISA 2.05 to decide on size of the FPSCR.
5897 2009-03-25 Kevin Buettner <kevinb@redhat.com>
5899 * mn10300-tdep.c (trad-frame.h): Don't include.
5900 (prologue-value.h): Include.
5901 (mn10300_frame_unwind_cache, set_reg_offsets): Delete.
5902 (struct mn10300_prologue): Define.
5903 (push_reg, translate_rreg, check_for_saved): New functions.
5904 (mn10300_analyze_prologue): Rewrite, using prologue-value
5905 machinery. Handle more instructions than before. Permit
5906 instructions to occur in any order.
5907 (mn10300_skip_prologue): Find the extents of the function
5908 in question; mn10300_analyze_prologue no longer does this.
5909 (mn10300_analyze_frame_prologue): New function.
5910 (mn10300_frame_base): New function.
5911 (mn10300_frame_this_id): Rewrite, no longer using trad-frame
5913 (mn10300_frame_prev_register): Likewise.
5914 (mn10300_frame_base_address, mn10300_frame_base struct): Delete.
5915 (mn10300_unwind_pc, mn10300_unwind_sp): Rename `next_frame' to
5917 (mn10300_frame_unwind_init): Don't call frame_base_set_default().
5919 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
5921 Fix completer problem for filename completion on the first try.
5923 * gdb/completer.h (gdb_completion_word_break_characters): New function.
5924 * gdb/completer.c: Include gdb_assert.h.
5925 (complete_line_internal_reason): New enum.
5926 (complete_line_internal): Change last argument type to
5927 complete_line_internal_reason.
5928 Modify function to handle the different complete_line_internal_reason
5930 (complete_line): Adapt to change in complete_line_internal.
5931 (command_completer): Ditto.
5932 (gdb_completion_word_break_characters): Implement new function.
5933 * top.c (init_main): Set rl_completion_word_break_hook to
5934 gdb_completion_word_break_characters.
5937 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
5939 ARI fix: "strlen d_name" rule.
5940 * linux-nat.c (linux_nat_xfer_osdata): Use NAMELEN macro.
5943 2009-03-24 Tom Tromey <tromey@redhat.com>
5944 Pedro Alves <pedro@codesourcery.com>
5946 * configure, config.in: Rebuild.
5947 * configure.ac: Check for libiconvlist.
5948 * charset.c: Check HAVE_LIBICONVLIST.
5949 * acinclude.m4 (AM_ICONV): Don't subst LIBICONV, LIBICONV_INCLUDE,
5950 LIBICONV_LIBDIR. Update CPPFLAGS and LIBS.
5951 * Makefile.in (LIBICONV, LIBICONV_INCLUDE, LIBICONV_LIBDIR):
5953 (INTERNAL_CFLAGS_BASE): Update.
5954 (INTERNAL_LDFLAGS): Update.
5957 2009-03-24 Jan Kratochvil <jan.kratochvil@redhat.com>
5959 * configure.ac: Initialize the variable $PREFER_CURSES.
5960 * configure: Regenerated.
5962 2009-03-24 Jan Kratochvil <jan.kratochvil@redhat.com>
5964 * configure.ac: Enable $PREFER_CURSES even with default $ENABLE_TUI.
5965 * configure: Regenerated.
5967 2009-03-24 Pierre Muller <muller@ics.u-strasbg.fr>
5969 ARI fix: "strerror" rule.
5970 * darwin-nat.c (darwin_ptrace): Use safe_strerror.
5971 (darwin_stop_inferior, darwin_attach, darwin_detach): Ditto.
5973 2009-03-23 Joel Brobecker <brobecker@adacore.com>
5975 * ada-exp.y (get_symbol_field_type): Make sure to resolve typedefs
5976 before looking up the fields inside our struct type.
5978 2009-03-23 Joel Brobecker <brobecker@adacore.com>
5980 * ada-lang.c (resolve_subexp) [UNOP_QUAL]: Resolve typedefs before
5981 trying to resolve the type qualification.
5983 2009-03-23 Joel Brobecker <brobecker@adacore.com>
5985 * ada-lang.c (ada_evaluate_subexp) [UNOP_IN_RANGE]: make sure
5986 we try to apply the attribute on the real type, rather than
5987 its associated typedef.
5989 2009-03-23 Joel Brobecker <brobecker@adacore.com>
5991 * ada-lang.c (ada_evaluate_subexp) [OP_ATR_MODULUS]: Use check_typdef
5992 to make sure we try to get the modulus of the actual type, not the
5995 2009-03-23 Joel Brobecker <brobecker@adacore.com>
5997 * ada-lang.c (ada_evaluate_subexp): [OP_ATR_FIRST, OP_ATR_LAST]
5998 [OP_ATR_LENGTH]: When using the attribute on a type, make sure
5999 to get the real type, not the associated typedef.
6001 2009-03-23 Joel Brobecker <brobecker@adacore.com>
6003 * ada-lang.c (ada_get_field_index): Add handling of the case
6004 when TYPE is a typedef of a struct.
6006 2009-03-23 Joel Brobecker <brobecker@adacore.com>
6008 Add gdb_usleep as a portable version of usleep based on gdb_select.
6009 * gdb_usleep.h, gdb_usleep.c: New files.
6010 * Makefile.in (SFILES): Add gdb_usleep.c.
6011 (HFILES_NO_SRCDIR): Add gdb_usleep.h.
6012 (COMMON_OBS): Add gdb_usleep.o.
6013 * ser-unix.c (hardwire_send_break): Replace call to gdb_select
6014 by call to gdb_usleep.
6016 2009-03-23 Joel Brobecker <brobecker@adacore.com>
6018 * buildsym.c (end_symtab): If we ignore the subfiles, then
6019 unlink the associated symtabs if they were already allocated.
6021 2009-03-23 Jerome Guitton <guitton@adacore.com>
6023 Provide a way to force building of GDB with libcurses.
6024 * configure.ac: Add --with-curses.
6025 * configure: Regenerated.
6027 2009-03-23 Tom Tromey <tromey@redhat.com>
6029 * dwarf2expr.c (execute_stack_op) <DW_OP_GNU_uninit>: Fix typo in
6032 2009-03-23 Paul Pluzhnikov <ppluzhnikov@google.com>
6034 * breakpoint.c (disable_breakpoints_in_unloaded_shlib): Use
6035 solib_contains_address_p instead of searching.
6037 2009-03-23 Tom Tromey <tromey@redhat.com>
6039 * charset.c (ICONV_CONST) <PHONY_ICONV>: Define.
6040 (iconv): Make 'inbuf' argument const.
6041 (convert_between_encodings): Use ICONV_CONST.
6042 (wchar_iterate): Likewise.
6044 2009-03-22 Christopher Faylor <me+cygwin@cgf.cx>
6046 * windows-nat.c (AdjustTokenPrivileges): Implement macro wraparound for
6047 dynamically loaded function.
6048 (LookupPrivilegeValueA): Ditto.
6049 (OpenProcessToken): Ditto.
6050 (AdjustTokenPrivileges): Rename and define placeholder for address of
6051 dynamically loaded function.
6052 (LookupPrivilegeValueA): Ditto.
6053 (OpenProcessToken): Ditto.
6054 (set_process_privilege): Remove check for loaded functions.
6055 (bad_OpenProcessToken): Define.
6056 (_initialize_loadable): Load token functions from advapi here, setting
6057 OpenProcessToken function to a dummy static function which always return
6058 error if OS doesn't support this functionality.
6060 2009-03-22 Nicolas Roche <roche@adacore.com>
6061 Christopher Faylor <me+cygwin@cgf.cx>
6063 * win32-nat.c (ctrl_c_handler): New function.
6064 (win32_wait): Register ctrl_c_handler as Ctrl-C handler if the inferior
6065 is run in a separate console.
6067 2009-03-22 Christopher Faylor <me+cygwin@cgf.cx>
6069 * windows-nat.c (DebugActiveProcessStop): Implement macro wraparound
6070 for dynamically loaded function.
6071 (DebugBreakProcess): Ditto.
6072 (DebugSetProcessKillOnExit): Ditto.
6073 (EnumProcessModules): Ditto.
6074 (GetModuleFileNameExA): Ditto.
6075 (GetModuleInformation): Ditto.
6076 (DebugActiveProcessStop): Rename and define placeholder for address of
6077 dynamically loaded function.
6078 (DebugBreakProcess): Ditto.
6079 (DebugSetProcessKillOnExit): Ditto.
6080 (EnumProcessModules): Ditto.
6081 (GetModuleFileNameExA): Ditto.
6082 (GetModuleInformation): Ditto.
6083 (psapi_loaded): Delete.
6084 (get_module_name): Don't check psapi_loaded, just rely on the fact that
6085 dynamically loaded functions will return failure if they weren't
6087 (has_detach_ability): Delete.
6088 (windows_attach): Remove call to has_detach_ability (). Just rely on
6089 functions being callable.
6090 (bad_DebugActiveProcessStop): Define.
6091 (bad_DebugBreakProcess): Ditto.
6092 (bad_DebugSetProcessKillOnExit): Ditto.
6093 (bad_EnumProcessModules): Ditto.
6094 (bad_GetModuleFileNameExA): Ditto.
6095 (bad_GetModuleInformation): Ditto.
6096 (_initialize_loadable): Rename from _initialize_psapi. Initialize all
6097 dynamic storage here, setting nonexistent functions to dummy static
6098 functions which always return error.
6100 2009-03-22 Pedro Alves <pedro@codesourcery.com>
6102 * mi/mi-interp.c (mi_interpreter_init): Attach mi_about_to_proceed
6103 to the about_to_proceed observer notification.
6104 (mi_about_to_proceed): New.
6105 (mi_on_resume): Only output ^running and the prompt here if the
6106 target was proceeded.
6107 * breakpoint.c (breakpoint_proceeded): New static.
6108 (breakpoint_about_to_proceed): New.
6109 (_initialize_breakpoints): Attach breakpoint_about_to_proceed to
6110 the about_to_proceed observer notification.
6111 * inferior.h (breakpoint_proceeded): Delete declaration.
6112 * infrun.c (clear_proceed_status): Don't set breakpoint_proceeded.
6113 Notify the about_to_proceed observers.
6114 (struct inferior_status): Delete breakpoint_proceeded member.
6115 (save_inferior_status): Don't save it.
6116 (restore_inferior_status): Don't restore it.
6117 * mi-main.h (mi_proceeded): Declare.
6118 * mi/mi-main.c (mi_cmd_execute): Clear mi_proceeded before running
6121 2009-03-22 Pedro Alves <pedro@codesourcery.com>
6123 * gdbthread.h (struct thread_info): Add in_infcall member.
6124 * infcall.c (run_inferior_call): Save, set and restore in_infcall.
6125 Remove reverences to suppress_resume_observer. Refresh
6126 `call_thread' after returning from `proceed'.
6127 * infcmd.c (suppress_resume_observer): Delete.
6128 * inferior.h (suppress_resume_observer): Delete declaration.
6129 * mi/mi-interp.c (mi_on_resume): Suppress output while calling an
6131 * thread.c (set_running): Remove references to
6132 suppress_resume_observer.
6133 * infrun.c (struct inferior_status): Add in_infcall member.
6134 (save_inferior_status): Save it.
6135 (restore_inferior_status): Restore it.
6137 2009-03-22 Pedro Alves <pedro@codesourcery.com>
6139 * infcall.c (run_inferior_call): Remove references to
6140 suppress_stop_observer.
6141 * infcmd.c (suppress_stop_observer): Delete.
6142 (finish_command_continuation): Remove NOTE. Don't clear
6143 suppress_stop_observer anymore.
6144 (finish_command_continuation_free_arg): Likewise.
6145 (finish_forward): Remove references to suppress_stop_observer.
6146 Call normal_stop observer if we haven't already.
6147 * inferior.h (suppress_stop_observer): Delete.
6148 * infrun.c (normal_stop): When deciding to suppress the
6149 normal_stop observer, check for proceed_to_finish instead of
6150 suppress_stop_observer.
6152 2009-03-22 Pedro Alves <pedro@codesourcery.com>
6154 * symfile.c (symfile_relocate_debug_section): Remove check for
6157 2009-03-21 Jan Kratochvil <jan.kratochvil@redhat.com>
6158 Jim Blandy <jimb@red-bean.com>
6159 Thiago Jung Bauermann <bauerman@br.ibm.com>
6160 Tom Tromey <tromey@redhat.com>
6162 Miscellaneous fixes to the Python code.
6163 * python/python-cmd.c (cmdpy_init): Accept keyword
6165 * python/python-value.c (valpy_string): Accept keyword
6167 (valpy_binop): Use `break' to exit from the TRY_CATCH block.
6168 Do not call value_to_value_object on NULL RES_VAL.
6169 (value_object_methods): Change `string' entry to also accept
6171 (convert_value_from_python): Return a copy of the value if obj is
6173 (value_object_methods): Mark the `string' method as accepting
6174 keywords, and show method "prototype" in the doc string.
6175 * python/python.c (get_parameter): Don't return inside a
6178 2009-03-20 Tom Tromey <tromey@redhat.com>
6180 Add support for convenience functions in Python.
6181 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-function.o.
6182 (SUBDIR_PYTHON_SRCS): Add python-function.c.
6183 (python-function.o): New target.
6184 * eval.c: Include "python/python.h" and <ctype.h>.
6185 (evaluate_subexp_standard): Handle values of type
6186 TYPE_CODE_INTERNAL_FUNCTION.
6187 * gdbtypes.h (type_code): Add TYPE_CODE_INTERNAL_FUNCTION.
6188 * parse.c (write_exp_string): Remove duplicate word in comment.
6189 * python/python-function.c: New file.
6190 * python/python-internal.h (gdbpy_initialize_functions): Add
6192 * python/python.c (_initialize_python): Call
6193 gdbpy_initialize_functions.
6194 * valprint.c (value_check_printable): Handle values of type
6195 TYPE_CODE_INTERNAL_FUNCTION.
6196 * value.c: Include "cli/cli-decode.h".
6197 (internal_function): New struct.
6198 (functionlist, internal_fn_type): New static variables.
6199 (lookup_only_internalvar,
6200 lookup_internalvar): Add const qualifier to name argument.
6201 (create_internalvar): Likewise. Initialize new field.
6202 (set_internal_var): Fix typo in comment. Don't allow assignment
6203 to canonical variable.
6204 (value_create_internal_function, value_internal_function_name,
6205 call_internal_function, function_command, function_destroyer,
6206 add_internal_function): New functions.
6207 (_initialize_values): Create `function' placeholder command.
6208 Initialize internal_fn_type.
6209 * value.h (lookup_only_internalvar, create_internalvar,
6210 lookup_internalvar): Add const qualifier to name argument.
6211 (internal_function_fn, add_internal_function, call_internal_function,
6212 value_internal_function_name): Add prototypes.
6213 (struct internalvar) <canonical>: New field.
6215 2009-03-20 Tom Tromey <tromey@redhat.com>
6217 * c-lang.c (evaluate_subexp_c): Call check_typedef.
6219 2009-03-20 Tom Tromey <tromey@redhat.com>
6220 Julian Brown <julian@codesourcery.com>
6222 PR i18n/7220, PR i18n/7821, PR exp/8815, PR exp/9103,
6223 PR i18n/9401, PR exp/9613:
6225 * value.h (value_typed_string): Declare.
6226 (val_print_string): Update.
6227 * valprint.h (print_char_chars): Update.
6228 * valprint.c (print_char_chars): Add type argument. Update.
6229 (val_print_string): Likewise.
6230 * valops.c (value_typed_string): New function.
6231 * utils.c (host_char_to_target): New function.
6232 (parse_escape): Use host_char_to_target, host_hex_value. Update.
6234 (no_control_char_error): Remove.
6235 * typeprint.c (print_type_scalar): Update.
6236 * scm-valprint.c (scm_scmval_print): Update.
6237 * scm-lang.h (scm_printchar, scm_printstr): Update.
6238 * scm-lang.c (scm_printchar): Add type argument.
6239 (scm_printstr): Likewise.
6240 * printcmd.c (print_formatted): Update.
6241 (print_scalar_formatted): Update.
6242 (printf_command) <wide_string_arg, wide_char_arg>: New constants.
6243 Handle '%lc' and '%ls'.
6244 * parser-defs.h (struct typed_stoken): New type.
6245 (struct stoken_vector): Likewise.
6246 (write_exp_string_vector): Declare.
6247 * parse.c (write_exp_string_vector): New function.
6248 * p-valprint.c (pascal_val_print): Update.
6249 * p-lang.h (is_pascal_string_type, pascal_printchar,
6250 pascal_printstr): Update.
6251 * p-lang.c (is_pascal_string_type): Remove 'char_size' argument.
6252 Add 'char_type' argument.
6253 (pascal_emit_char): Add type argument.
6254 (pascal_printchar): Likewise.
6255 (pascal_printstr): Likewise.
6256 * objc-lang.c (objc_emit_char): Add type argument.
6257 (objc_printchar): Likewise.
6258 (objc_printstr): Likewise.
6259 * macroexp.c (get_character_constant): Handle unicode characters.
6261 (get_string_literal): Handle unicode strings. Use
6263 * m2-valprint.c (print_unpacked_pointer): Update.
6264 (m2_print_array_contents): Update.
6265 (m2_val_print): Update.
6266 * m2-lang.c (m2_emit_char): Add type argument.
6267 (m2_printchar): Likewise.
6268 (m2_printstr): Likewise.
6269 * language.h (struct language_defn) <la_printchar>: Add type
6271 <la_printstr, la_emitchar>: Likewise.
6272 (LA_PRINT_CHAR): Likewise.
6273 (LA_PRINT_STRING): Likewise.
6274 (LA_EMIT_CHAR): Likewise.
6275 * language.c (unk_lang_emit_char): Add type argument.
6276 (unk_lang_printchar): Likewise.
6277 (unk_lang_printstr): Likewise.
6278 * jv-valprint.c (java_val_print): Update.
6279 * jv-lang.c (java_emit_char): Add type argument.
6280 * f-valprint.c (f_val_print): Update.
6281 * f-lang.c (f_emit_char): Add type argument.
6282 (f_printchar): Likewise.
6283 (f_printstr): Likewise.
6284 * expprint.c (print_subexp_standard): Update.
6285 * charset.h (target_wide_charset): Declare.
6286 (c_target_char_has_backslash_escape, c_parse_backslash,
6287 host_char_print_literally, host_char_to_target,
6288 target_char_to_host, target_char_to_control_char): Remove.
6289 (enum transliterations): New type.
6290 (convert_between_encodings): Declare.
6291 (HOST_ESCAPE_CHAR): New define.
6292 (host_letter_to_control_character, host_hex_value): Declare.
6293 (enum wchar_iterate_result): New enum.
6294 (struct wchar_iterator): Declare.
6295 (make_wchar_iterator, make_cleanup_wchar_iterator, wchar_iterator,
6296 wchar_push_back): Declare.
6297 * charset-list.h: New file.
6298 * c-valprint.c (textual_name): New function.
6299 (textual_element_type): Handle wide character types.
6300 (c_val_print): Pass original type to textual_element_type. Handle
6301 wide character types.
6302 (c_value_print): Use textual_element_type. Pass original type of
6304 * c-lang.h (enum c_string_type): New type.
6305 (c_printchar, c_printstr): Update.
6306 * c-lang.c (classify_type): New function.
6307 (print_wchar): Likewise.
6308 (c_emit_char): Add type argument. Handle wide characters.
6309 (c_printchar): Likewise.
6310 (c_printstr): Add type argument. Handle wide and multibyte
6312 (convert_ucn): New function.
6313 (emit_numeric_character): Likewise.
6314 (convert_octal): Likewise.
6315 (convert_hex): Likewise.
6316 (ADVANCE): New macro.
6317 (convert_escape): New function.
6318 (parse_one_string): Likewise.
6319 (evaluate_subexp_c): Likewise.
6320 (exp_descriptor_c): New global.
6321 (c_language_defn): Use exp_descriptor_c.
6322 (cplus_language_defn): Likewise.
6323 (asm_language_defn): Likewise.
6324 (minimal_language_defn): Likewise.
6325 (charset_for_string_type): New function.
6326 * c-exp.y (%union): Add 'svec' and 'tsval'.
6328 (exp): Add CHAR production.
6329 (string_exp): Rewrite.
6330 (exp) <string_exp>: Rewrite.
6331 (tempbuf): Now global.
6332 (tempbuf_init): New global.
6333 (parse_string_or_char): New function.
6334 (yylex) <tempbuf>: Now global.
6335 <tokptr, tempbufindex, tempbufsize, token_string, class_prefix>:
6337 Handle 'u', 'U', and 'L' prefixes. Call parse_string_or_char.
6338 (c_parse_escape): New function.
6339 * auxv.c (fprint_target_auxv): Update.
6340 * ada-valprint.c (ada_emit_char): Add type argument.
6341 (ada_printchar): Likewise.
6342 (ada_print_scalar): Update.
6343 (printstr): Add type argument. Update calls to ada_emit_char.
6344 (ada_printstr): Add type argument.
6345 (ada_val_print_array): Update.
6346 (ada_val_print_1): Likewise.
6347 * ada-lang.c (emit_char): Add type argument.
6348 * ada-lang.h (ada_emit_char, ada_printchar, ada_printstr): Add
6350 * gdb_locale.h: Include langinfo.h.
6351 * charset.c (_initialize_charset): Set default host charset from
6352 the locale. Don't register charsets. Add target-wide-charset
6353 commands. Call find_charset_names.
6354 (struct charset, struct translation): Remove.
6355 (GDB_DEFAULT_HOST_CHARSET): Remove.
6356 (GDB_DEFAULT_TARGET_WIDE_CHARSET): New define.
6357 (target_wide_charset_name): New global.
6358 (show_host_charset_name): Handle "auto".
6359 (show_target_wide_charset_name): New function.
6360 (host_charset_enum, target_charset_enum): Remove.
6361 (charset_enum): New global.
6362 (all_charsets, register_charset, lookup_charset, all_translations,
6363 register_translation, lookup_translation): Remove.
6364 (simple_charset, ascii_print_literally, ascii_to_control): Remove.
6365 (iso_8859_print_literally, iso_8859_to_control,
6366 iso_8859_family_charset): Remove.
6367 (ebcdic_print_literally, ebcdic_to_control,
6368 ebcdic_family_charset): Remove.
6369 (struct cached_iconv, check_iconv_cache, cached_iconv_convert,
6370 register_iconv_charsets): Remove.
6371 (target_wide_charset_be_name, target_wide_charset_le_name): New
6373 (identity_either_char_to_other): Remove.
6374 (set_be_le_names, validate): New functions.
6375 (backslashable, backslashed, represented): Remove.
6376 (default_c_target_char_has_backslash_escape): Remove.
6377 (default_c_parse_backslash, iconv_convert): Remove.
6378 (ascii_to_iso_8859_1_table, ascii_to_ebcdic_us_table,
6379 ascii_to_ibm1047_table, iso_8859_1_to_ascii_table,
6380 iso_8859_1_to_ebcdic_us_table, iso_8859_1_to_ibm1047_table,
6381 ebcdic_us_to_ascii_table, ebcdic_us_to_iso_8859_1_table,
6382 ebcdic_us_to_ibm1047_table, ibm1047_to_ascii_table,
6383 ibm1047_to_iso_8859_1_table, ibm1047_to_ebcdic_us_table): Remove.
6384 (table_convert_char, table_translation, simple_table_translation):
6386 (current_host_charset, current_target_charset,
6387 c_target_char_has_backslash_escape_func,
6388 c_target_char_has_backslash_escape_baton): Remove.
6389 (c_parse_backslash_func, c_parse_backslash_baton): Remove.
6390 (host_char_to_target_func, host_char_to_target_baton): Remove.
6391 (target_char_to_host_func, target_char_to_host_baton): Remove.
6392 (cached_iconv_host_to_target, cached_iconv_target_to_host):
6394 (lookup_charset_or_error, check_valid_host_charset): Remove.
6395 (set_host_and_target_charsets): Remove.
6396 (set_host_charset, set_target_charset): Remove.
6397 (set_host_charset_sfunc, set_target_charset_sfunc): Rewrite.
6398 (set_target_wide_charset_sfunc): New function.
6399 (show_charset): Print target wide character set.
6400 (host_charset, target_charset): Rewrite.
6401 (target_wide_charset): New function.
6402 (c_target_char_has_backslash_escape): Remove.
6403 (c_parse_backslash): Remove.
6404 (host_letter_to_control_character): New function.
6405 (host_char_print_literally): Remove.
6406 (host_hex_value): New function.
6407 (target_char_to_control_char): Remove.
6408 (cleanup_iconv): New function.
6409 (convert_between_encodings): New function.
6410 (target_char_to_host): Remove.
6411 (struct wchar_iterator): Define.
6412 (make_wchar_iterator, make_cleanup_wchar_iterator, wchar_iterator,
6413 wchar_push_back): New functions.
6414 (do_cleanup_iterator): New function.
6415 (char_ptr): New typedef.
6416 (charsets): New global.
6417 (add_one, find_charset_names): New functions.
6418 (default_charset_names): New global.
6419 (auto_host_charset_name): Likewise.
6420 * aclocal.m4, config.in, configure: Rebuild.
6421 * configure.ac: Call AM_LANGINFO_CODESET.
6422 (GDB_DEFAULT_HOST_CHARSET): Default to UTF-8.
6423 (AM_ICONV): Invoke earlier.
6424 * acinclude.m4: Include codeset.m4. Subst LIBICONV_INCLUDE and
6425 LIBICONV_LIBDIR. Check for libiconv in build tree.
6426 * Makefile.in (LIBICONV_LIBDIR, LIBICONV_INCLUDE): New macros.
6427 (INTERNAL_CFLAGS_BASE): Add LIBICONV_INCLUDE.
6428 (INTERNAL_LDFLAGS): Add LIBICONV_LIBDIR.
6429 * gdb_obstack.h (obstack_grow_wstr): New define.
6430 * gdb_wchar.h: New file.
6431 * defs.h: Include it.
6433 2009-03-20 Tom Tromey <tromey@redhat.com>
6434 Jan Kratochvil <jan.kratochvil@redhat.com>
6436 * dwarf2read.c (process_die): Handle DW_TAG_typedef.
6437 * eval.c (evaluate_subexp_standard) <OP_TYPE>: Strip a single
6439 * ada-lang.c (decode_packed_array_type): Call CHECK_TYPEDEF on the
6441 * ada-typeprint.c (print_array_type): Do the NULL check
6444 2009-03-19 Tom Tromey <tromey@redhat.com>
6446 * utils.c (do_obstack_free): New function.
6447 (make_cleanup_obstack_free): Likewise.
6448 * defs.h (make_cleanup_obstack_free): Declare.
6450 2009-03-18 Doug Evans <dje@google.com>
6452 * linux-nat.c (linux_nat_find_memory_regions): Result of PIDGET is an
6453 int, not a long long.
6454 (linux_nat_info_proc_cmd): Store pid in long instead of long long.
6456 * expprint.c (dump_raw_expression): Print note if non-NULL.
6458 * printcmd.c (display_uses_solib_p): Redo loop, scan element list
6461 2009-03-18 Nathan Sidwell <nathan@codesourcery.com>
6463 * Makefile.in: Update license to GPLv3.
6464 * ada-exp.y: Update license to GPLv3.
6465 * ada-lex.l: Update license to GPLv3.
6466 * c-exp.y: Update license to GPLv3.
6467 * cp-name-parser.y: Update license to GPLv3.
6468 * darwin-nat-info.c: Update license to GPLv3.
6469 * f-exp.y: Update license to GPLv3.
6470 * gdb_thread_db.h: Update license to GPLv3.
6471 * hppanbsd-nat.c: Update license to GPLv3.
6472 * hppanbsd-tdep.c: Update license to GPLv3.
6473 * hppaobsd-tdep.c: Update license to GPLv3.
6474 * jv-exp.y: Update license to GPLv3.
6475 * m2-exp.y: Update license to GPLv3.
6476 * objc-exp.y: Update license to GPLv3.
6477 * p-exp.y: Update license to GPLv3.
6478 * reply_mig_hack.awk: Update license to GPLv3.
6479 * reverse.c: Update license to GPLv3.
6480 * xtensa-xtregs.c: Update license to GPLv3.
6482 2009-03-18 Pedro Alves <pedro@codesourcery.com>
6484 * remote.c (remote_close): Don't call generic_mourn_inferior.
6485 (remote_mourn_1): Call generic_mourn_inferior after closing the
6488 2009-03-18 Pedro Alves <pedro@codesourcery.com>
6490 * remote.c (remote_start_remote): Add missing call to
6491 init_wait_for_inferior in non-stop mode.
6493 2009-03-18 Pedro Alves <pedro@codesourcery.com>
6495 * breakpoint.c (bpstat_should_step): Only consider software
6496 watchpoints that have a location.
6498 2009-03-17 Joel Brobecker <brobecker@adacore.com>
6500 Add a target_ops parameter to the to_kill method in struct target_ops.
6502 * target.h (struct target_ops): Add a "target_ops *" parameter to
6504 (target_kill): Remove macro. Add declaration.
6505 * target.c (debug_to_kill): Delete, no longer necessary.
6506 (target_kill): New function.
6507 (update_current_target): Stop inheriting the to_kill method.
6508 Do not de_fault it to no_process either.
6509 (setup_target_debug): Do not set current_target.to_kill.
6510 * gnu-nat.c, go32-nat.c, hpux-thread.c, inf-ptrace.c, inf-ttrace.c,
6511 linux-nat.c, monitor.c, nto-procfs.c, procfs.c, remote-m32r-sdi.c,
6512 remote-mips.c, remote-sim.c, remote.c, windows-nat.c: Update
6515 2009-03-17 Doug Evans <dje@google.com>
6517 * amd64-linux-nat.c (si_timerid,si_overrun): Provide definition for
6518 glibc 2.3.2 and earlier.
6520 2009-03-17 Joel Brobecker <brobecker@adacore.com>
6522 * frame.c (get_prev_frame_1): Do not perform the inner_frame
6523 sanity check if this_frame is not NORMAL.
6524 (frame_id_inner): Update the description of this function.
6526 2009-03-17 Hui Zhu <teawater@gmail.com>
6528 * stack.c: Change the introduce of "disassemble-next-line".
6530 2009-03-17 Pedro Alves <pedro@codesourcery.com>
6532 * mi/mi-main.h (mi_print_timing_maybe): Add strict prototype,
6535 2009-03-17 Hui Zhu <teawater@gmail.com>
6537 * stack.c: Include valprint.h.
6538 (disassemble_next_line): New enum.
6539 (show_disassemble_next_line): New function. Show the current
6540 value of disassemble-next-line.
6541 (gdb_disassembly_stub_args): New struct for argument passing
6542 between function do_gdb_disassembly and function
6543 gdb_disassembly_stub.
6544 (gdb_disassembly_stub): New function. Helper for
6546 (do_gdb_disassembly): New function. Use TRY_CATCH to catch
6547 the exception from the gdb_disassembly because it will be
6548 broken by filter sometime.
6549 (print_frame_info): If disassemble-next-line is set to auto
6550 or on and doesn't have the line debug messages for $pc,
6551 output the next instruction.
6552 If disassemble-next-line is set to on and there is line debug
6553 messages, output assembly codes for next line.
6554 (_initialize_stack): Make the "set disassemble-next-line"
6555 command an auto-boolean command. Change its class to
6556 class_stack. Place it in the top level set list. Extend help
6557 to describe the auto mode.
6559 2009-03-17 Pedro Alves <pedro@codesourcery.com>
6561 * infrun.c (normal_stop): Don't overwrite old_chain.
6563 2009-03-16 Joel Brobecker <brobecker@adacore.com>
6565 * remote-mips.c (mips_load): Replace call to regcache_set_valid_p,
6566 which is undefined, by call to regcache_invalidate, which should
6567 do what the original author wanted to do.
6569 2009-03-16 Joel Brobecker <brobecker@adacore.com>
6571 * remote-mips.c (mips_mourn_inferior): Add missing ops parameter.
6572 (mips_create_inferior): Likewise.
6574 2009-03-16 Joel Brobecker <brobecker@adacore.com>
6576 * go32-nat.c (go32_create_inferior): Add missing ops parameter.
6578 2009-03-16 Joel Brobecker <brobecker@adacore.com>
6580 * darwin-nat.c (darwin_resume): Fix a compiler warning when
6581 building on x86_64-darwin.
6583 2009-03-16 Tristan Gingold <gingold@adacore.com>
6585 * configure.tgt: Add handling for x86_64-darwin.
6587 2009-03-16 Jan Kratochvil <jan.kratochvil@redhat.com>
6589 * auxv.c (fprint_target_auxv): New TAG for AT_RANDOM.
6591 2009-03-15 Joel Brobecker <brobecker@adacore.com>
6593 * aix-thread.c (aix_thread_thread_alive, aix_thread_pid_to_str):
6594 Use the ops parameter to get to the target beneath, rather than
6595 using the current_target global. Using the current_target global
6596 was an unintended accident.
6598 2009-03-15 Joel Brobecker <brobecker@adacore.com>
6600 Fix an error happening while loading symbols from a core file
6603 * rs6000-nat.c (xcoff_relocate_symtab): Use target_has_execution
6604 to detect whether we're debugging a core file or not.
6606 2009-03-15 Joel Brobecker <brobecker@adacore.com>
6608 Modernize the aix-thread later by getting rid of the base_target
6609 global. This brings back to life the AIX port which was otherwise
6610 crashing all the time.
6612 * aix-thread.c (base_target): Delete.
6613 (pd_enable): Do not set base_target.
6614 (aix_thread_attach): Use find_target_beneath instead of base_target.
6615 (aix_thread_detach, aix_thread_resume, aix_thread_wait)
6616 (aix_thread_fetch_registers, aix_thread_store_registers),
6617 (aix_thread_xfer_partial, aix_thread_mourn_inferior)
6618 (aix_thread_thread_alive, aix_thread_pid_to_str): Likewise.
6619 (aix_thread_kill): Delete. Does not seem necessary.
6620 (init_aix_thread_ops): Do not set aix_thread_ops.to_kill.
6622 2009-03-15 Jan Kratochvil <jan.kratochvil@redhat.com>
6624 * stack.c (return_command <retval_exp>): New variables retval_expr
6625 and old_chain. Inline parse_and_eval to initialize retval_expr. Check
6626 RETVAL_EXPR for UNOP_CAST and set RETURN_TYPE to the RETURN_VALUE type
6627 if RETURN_TYPE is NULL.
6629 2009-03-14 Pedro Alves <pedro@codesourcery.com>
6631 * remote.c (PACKET_qAttached): New.
6632 (remote_query_attached): New.
6633 (remote_add_inferior): Add new `attached' argument. Handle it.
6634 (remote_notice_new_inferior, remote_start_remote): Adjust to pass
6635 -1 to remote_add_inferior in new parameter.
6636 (extended_remote_attach_1): Adjust to pass 1 to
6637 remote_add_inferior in the new parameter.
6638 (extended_remote_create_inferior_1): Adjust to pass 0 to
6639 remote_add_inferior in the new parameter.
6640 (_initialize_remote): Add "set/show remote query-attached-packet"
6643 2009-03-13 Tom Tromey <tromey@redhat.com>
6645 * symtab.c (lookup_symbol_in_language): Use a cleanup.
6647 2009-03-13 Doug Evans <dje@google.com>
6649 * exceptions.h: Clean up some comments on catch_exceptions usage.
6650 * exceptions.c: Ditto. Plus mark catch_errors as superseded by
6653 2009-02-17 Joel Brobecker <brobecker@adacore.com>
6655 The following patch helps getting rid of a warning inside solib-som.c.
6657 * source.c (source_full_path_of): Constify parameter filename.
6658 * defs.h (source_full_path_of): Update declaration accordingly.
6660 2009-03-12 Joel Brobecker <brobecker@adacore.com>
6662 * ada-lang.c (ada_evaluate_subexp): Merge case BINOP_REM and
6663 BINOP_MOD cases with the handling of case BINOP_DIV and BINOP_MUL.
6664 Remove useless op value checks when EVAL_AVOID_SIDE_EFFECTS.
6666 2009-03-12 Joel Brobecker <brobecker@adacore.com>
6668 * ada-lang.c (ada_evaluate_subexp) <BINOP_DIV>: make sure to
6669 promote the operands when noside is EVAL_AVOID_SIDE_EFFECTS.
6671 2009-03-12 Joel Brobecker <brobecker@adacore.com>
6673 * ada-tasks.c (ada_task_is_alive): Move up and make static.
6674 * ada-lang.h (ada_task_is_alive): Remove declaration.
6676 2009-03-12 Jerome Guitton <guitton@adacore.com>
6678 * ada-lang.c (ada_delta): Change the type of numerators and
6679 denominators to DOUBLEST, as they may not fit into a long.
6680 (scaling_factor): Ditto.
6682 2009-03-12 Jerome Guitton <guitton@adacore.com>
6684 * language.c (lang_bool_type): Set lai->bool_type_symbol to NULL.
6686 2009-03-12 Joel Brobecker <brobecker@adacore.com>
6688 * ada-lang.c (ada_evaluate_subexp) [OP_VAR_VALUE]: For tagged
6689 types, if we are unable to determine the actual symbol type
6690 from its tag, then use the static approximation instead.
6692 2009-03-12 Joel Brobecker <brobecker@adacore.com>
6694 Fix crash printing packed record with packed array.
6696 * ada-lang.c (ada_modulus_from_name): New function.
6697 (ada_modulus): In the case where the type length is bigger than
6698 the size of the type used to hold the bounds, try determining
6699 the modulus from the type name.
6700 (ada_value_primitive_packed_val): Fix bug in the computation of
6701 ntarg causing an out-of-buffer invalid access.
6703 2009-03-12 Joel Brobecker <brobecker@adacore.com>
6705 Fix segfault when printing short_integer'last.
6707 * ada-lang.c (ada_find_any_type): Search in the primitive types
6708 if a symbol could not be found.
6710 2009-03-12 Joel Brobecker <brobecker@adacore.com>
6712 * ada-tasks.c (task_states,long_task_states): Add new states
6713 Activating and Acceptor_Delay_Sleep. Update the description
6714 of state Acceptor_Sleep.
6716 2009-03-12 Jonas Maebe <jonas.maebe@elis.ugent.be> (obvious change)
6718 Fix a build failure on Darwin following some changes in
6719 the profile of some target_ops methods.
6721 * darwin-nat.c (darwin_kill_inferior): Add target_ops parameter
6723 (darwin_stop_inferior, darwin_detach): Likewise.
6725 2009-03-12 Vladimir Prus <vladimir@codesourcery.com>
6727 Include token in ^running notification for CLI commands.
6729 * mi/mi-main.c (mi_execute_command): Set current_token here.
6730 (mi_cmd_execute): Do not set current_token here.
6732 2009-03-12 Vladimir Prus <vladimir@codesourcery.com>
6736 * mi/mi-main.c (mi_print_timing_maybe): New.
6737 (captured_mi_execute_command): Simplify. Output timings to
6739 (mi_execute_async_cli_command): Do not print timings.
6740 * mi/mi-main.h (mi_print_timing_maybe): Declare.
6741 * mi/mi-interp.c (mi_on_normal_stop): Call mi_print_timing_maybe.
6743 2009-03-12 Jerome Guitton <guitton@adacore.com>
6745 * xcoffread.c (process_linenos): Check if the line in the
6746 include table refers to the main source file and, if so,
6747 add them to the main subfile.
6749 2009-03-12 Joel Brobecker <brobecker@adacore.com>
6751 Fix a build failure on AIX introduced after a change in the profile
6752 of some of the "methods" in the target_ops structure.
6753 * aix-thread.c: Add missing target_ops parameter throughout.
6755 Implement Ada task switching on AIX.
6756 * aix-thread.c (aix_thread_get_ada_task_ptid): New function.
6757 (init_aix_thread_ops): Set aix_thread_ops.to_get_ada_task_ptid.
6759 2009-03-11 Daniel Jacobowitz <dan@codesourcery.com>
6761 * breakpoint.c (bpstat_check_breakpoint_conditions): Use
6762 value_mark and value_free_to_mark.
6763 * objfiles.c (free_objfile): Call objfile_free_data before
6766 2009-03-10 Hui Zhu <teawater@gmail.com>
6768 * disasm.c (gdb_disassembly): Remove unused argument
6770 * disasm.h (gdb_disassembly): Ditto.
6771 * cli/cli-cmds.c (print_disassembly): Ditto.
6772 * mi/mi-cmd-disas.c (mi_cmd_disassemble): Ditto.
6774 2009-03-09 Paul Pluzhnikov <ppluzhnikov@google.com>
6776 * solib.c (solib_contains_address_p): New function.
6777 (solib_name_from_address): Use it.
6778 * printcmd.c (display_uses_solib_p): Use it.
6779 * solib.h (solib_contains_address_p): Declare it.
6781 2009-03-09 Jan Kratochvil <jan.kratochvil@redhat.com>
6783 * varobj.c (free_variable): Call value_free.
6785 2009-03-09 Jan Kratochvil <jan.kratochvil@redhat.com>
6788 * dwarf2read.c (dwarf_decode_macros): New variable `at_commandline'.
6789 Move the variable `macinfo_type' out of the loop. Create a new
6790 processing pass before the current one to pre-create `current_file'.
6791 New complaint on misplaced zero/non-zero definitions/includes.
6792 Skip first DW_MACINFO_start_file with `at_commandline' set.
6794 2008-03-09 Vladimir Prus <vladimir@codesourcery.com>
6796 * solib.c (reload_shared_libraries): Give
6797 inferior a chance to reset solib breakpoint.
6800 2009-03-08 Christopher Faylor <me+cygwin@cgf.cx>
6802 * windows-nat.c (dr): Redefine to use largest possible integer which
6804 (cygwin_set_dr): Avoid coercion.
6806 2009-03-08 Oswald Buddenhagen <oswald.buddenhagen@trolltech.de>
6808 * windows-nat.c (windows_create_inferior): Implement --tty handling on
6811 2009-03-06 Paul Pluzhnikov <ppluzhnikov@google.com>
6813 Rename solib_address to solib_name_from_address.
6814 * breakpoint.c (insert_bp_location, disable_breakpoints_in_shlibs)
6815 (disable_breakpoints_in_unloaded_shlib): Update.
6816 * printcmd.c (display_uses_solib_p): Likewise.
6817 * stack.c (print_frame): Likewise.
6821 2009-03-05 Paul Pluzhnikov <ppluzhnikov@google.com>
6823 * printcmd.c (do_one_display): Reparse exp_string.
6824 (display_uses_solib_p): New function.
6825 (clear_dangling_display_expressions): New function.
6826 (_initialize_printcmd): Add observer.
6827 * solib.c (no_shared_libraries): Swap order of calls to
6828 clear_solib and objfile_purge_solibs.
6830 2009-03-05 Joel Brobecker <brobecker@adacore.com>
6832 Implement the target-specific part of Ada tasking support
6835 * dec-thread.c (dec_thread_get_ada_task_ptid): New function.
6836 (init_dec_thread_ops): Set the to_get_ada_task_ptid method.
6838 2009-03-05 Joel Brobecker <brobecker@adacore.com>
6840 Get rid of the global "base_target" and use "find_target_beneath"
6841 to find the underlying target.
6842 * dec-thread.c (base_target): Delete.
6843 (enable_dec_thread): Remove assignement to base_target.
6844 (dec_thread_detach, dec_thread_wait, dec_thread_wait)
6845 (dec_thread_fetch_registers, dec_thread_store_registers)
6846 (dec_thread_mourn_inferior, dec_thread_pid_to_str):
6847 Update the function profile if necessary.
6848 Use find_target_beneath to call the same method but from
6849 the underlying target, removing the need for "base_target".
6851 * dec-thread.c (dec_thread_get_regsets, dec_thread_set_regsets):
6852 Fix a copy/paste error in a few debug traces...
6854 * solib-osf.c (init_so): Use a simpler method for computing
6855 the size of lm_info structure. This also gets rid of warning
6856 emitted by the compiler.
6858 2009-03-05 Pedro Alves <pedro@codesourcery.com>
6860 * breakpoint.c (check_duplicates_for): Skip permanent breakpoints
6861 duplicates of permanent breakpoints.
6863 2009-03-04 Pedro Alves <pedro@codesourcery.com>
6865 * inferior.h (notice_new_inferior): Declare.
6866 * infcmd.c (notice_new_inferior): New.
6867 * remote.c (remote_add_inferior, remote_add_thread): New.
6868 (notice_new_inferiors): Rename to...
6869 (remote_notice_new_inferior): ... this. Add RUNNING argument.
6870 Use remote_add_thread instead of add_thread, passing it the
6871 RUNNING argument. Add an inferior with remote_add_inferior. If
6872 we just learned about an inferior, call notice_new_inferior.
6873 (record_currthread): Adjust.
6874 (remote_threads_info): Adjust to use remote_notice_new_inferior.
6875 (remote_start_remote, extended_remote_attach_1): Use
6876 remote_add_inferior.
6877 (process_stop_reply): Adjust. Call remote_notice_new_inferior
6878 after handling expedited registers and watchpoint state.
6879 (extended_remote_create_inferior_1): Use remote_add_inferior.
6881 2009-03-04 Aleksandar Ristovski <aristovski@qnx.com>
6883 * infcmd.c (registers_info): Remove register number case.
6885 2009-03-03 Pedro Alves <pedro@codesourcery.com>
6887 * top.c (quit_target): Check for target_has_execution before
6888 killing or detaching from inferiors.
6890 2009-03-02 Joel Brobecker <brobecker@adacore.com>
6892 Remove some unused routines.
6894 * ada-lang.c (is_suppressed_name, ada_suppress_symbol_printing):
6896 * ada-lang.c (ada_task_list_iterator_ftype)
6897 (iterate_over_live_ada_tasks): Delete.
6898 * ada-tasks.c (ada_get_environment_task, iterate_over_live_ada_tasks):
6901 2009-03-01 Doug Evans <dje@google.com>
6903 * symtab.c: Remove trailing whitespace throughout the file.
6904 (expand_line_sal): Fix some typos and whitespace.
6906 * Makefile.in (clean): rm -f $(DEPDIR)/*.
6908 * Makefile.in (GDB_CFLAGS): Add -I$(srcdir)/common.
6909 (init.c): signals/ -> common/.
6910 (signals.o): Update.
6911 * target.h (target_signal_to_string,target_signal_to_string)
6912 (target_signal_from_name,target_signal_to_host_p)
6913 (target_signal_from_host,target_signal_to_host): Move to ...
6914 * common/gdb_signals.h: ... here. New file.
6915 * common/signals.c: Moved here from signals/signals.c.
6916 #include gdb_signals.h, remove #include of target.h in gdb case.
6917 (target_signal_from_command,default_target_signal_to_host)
6918 (default_target_signal_from_host): Move inside #ifndef GDBSERVER.
6920 Include thread ID in target_wait debugging output.
6921 * infrun.c (print_target_wait_results): New function.
6922 (wait_for_inferior,fetch_inferior_event): Call it.
6924 2009-02-27 Pedro Alves <pedro@codesourcery.com>
6926 * gdb_proc_service.h (struct ps_prochandle): Replace pid_t field
6927 with a ptid_t field.
6928 * linux-thread-db.c (thread_get_info_callback): Build the ptid
6929 using the pid stored in proc_handle.ptid.
6930 (thread_from_lwp, thread_db_attach_lwp, enable_thread_event)
6931 (check_for_thread_db, thread_db_detach, check_event)
6932 (thread_db_mourn_inferior, find_new_threads_callback)
6933 (thread_db_find_new_threads_1): Adjust.
6934 * proc-service.c (ps_xfer_memory, ps_lgetregs, ps_lsetregs)
6935 (ps_lgetfpregs, ps_lsetfpregs, ps_getpid): Adjust.
6937 2009-02-27 Phil Muldoon <pmuldoon@redhat.com>
6939 * valprint.c (read_string): Rework clean-up logic. Use
6940 free_current_contents to clean-up buffer.
6942 2009-02-27 Andreas Schwab <schwab@linux-m68k.org>
6944 * MAINTAINERS: Update e-mail address.
6946 2009-02-26 Phil Muldoon <pmuldoon@redhat.com>
6948 * python/python-utils.c (python_string_to_unicode): Always return
6950 (python_string_to_target_string): Decrement transient python
6952 (python_string_to_host_string): Likewise.
6954 2007-02-26 Pedro Alves <pedro@codesourcery.com>
6956 * mips-linux-nat.c (mips64_linux_fetch_registers): Pass `ops' to
6957 call to super_fetch_registers.
6958 (mips64_linux_store_registers): Pass `ops' to call to
6959 super_store_registers.
6961 2009-02-25 Doug Evans <dje@google.com>
6963 * breakpoint.c (insert_bp_location): Add \n to overlay breakpoint
6966 * breakpoint.c (disable_breakpoints_in_shlibs): Delete local
6967 disabled_shlib_breaks, unused.
6969 * printcmd.c (build_address_symbolic): Fix comment.
6971 2009-02-25 Hui Zhu <teawater@gmail.com>
6973 * cli/cli-script.c (define_command): Add _() to query.
6974 * gnu-nat.c (inf_validate_task_sc): Ditto.
6975 * infcmd.c (kill_if_already_running): Ditto.
6976 (jump_command): Ditto.
6977 (attach_command): Ditto.
6978 * inflow.c (kill_command): Ditto.
6979 * infrun.c (handle_command): Ditto.
6980 * maint.c (maintenance_dump_me): Ditto.
6981 * memattr.c (mem_delete_command): Ditto.
6982 * monitor.c (monitor_interrupt_query): Ditto.
6983 * nto-procfs.c (interrupt_query): Ditto.
6984 * printcmd.c (undisplay_command): Ditto.
6985 * remote-mips.c (mips_kill): Ditto.
6986 * remote.c (interrupt_query): Ditto.
6987 * solib-irix.c (irix_open_symbol_file_object): Ditto.
6988 * solib-osf.c (osf_open_symbol_file_object): Ditto.
6989 * solib-pa64.c (pa64_open_symbol_file_object): Ditto.
6990 * solib-som.c (som_open_symbol_file_object): Ditto.
6991 * solib-svr4.c (open_symbol_file_object): Ditto.
6992 * symfile.c (symbol_file_add_with_addrs_or_offsets): Ditto.
6993 * target.c (kill_or_be_killed): Ditto.
6994 * tracepoint.c (delete_trace_command): Ditto.
6995 * top.c (quit_confirm): Add _() to s that will be used
6998 2009-02-24 Pierre Muller <muller@ics.u-strasbg.fr>
7000 Fix windows-nat.c compilation failure.
7002 * windows-nat.c (windows_thread_alive): Fix forward declaration.
7003 (get_windows_debug_event): Add ops parameter to call to windows_resume.
7005 2009-02-23 Pedro Alves <pedro@codesourcery.com>
7007 * remote-sim.c (gdbsim_resume): Add target_ops* argument.
7009 2009-02-23 Jay Krell <jay.krell@cornell.edu> (tiny change)
7011 * symtab.c (find_line_symtab): Initialize exact to avoid
7014 2009-02-23 Pedro Alves <pedro@codesourcery.com>
7016 * i386-linux-nat.c (i386_linux_fetch_inferior_registers): Pass
7017 `ops' to recursive call.
7019 2009-02-23 Pedro Alves <pedro@codesourcery.com>
7021 * corelow.c (get_core_registers): Adjust.
7022 (core_file_thread_alive): Rename to...
7023 (core_thread_alive): ... this.
7024 (core_pid_to_str): Try gdbarch_core_pid_to_str first.
7025 (init_core_ops): Adjust.
7026 (coreops_suppress_target): Delete.
7027 (_initialize_corelow): Unconditionally add core_ops.
7028 * procfs.c: Include "inf-child.h".
7029 (procfs_ops): Delete.
7030 (init_procfs_ops): Delete. Reimplement as...
7031 (procfs_target): ... this, inheriting from inf-child.
7032 (procfs_attach, procfs_detach, procfs_fetch_registers): Adjust.
7033 (procfs_prepare_to_store): Delete.
7034 (procfs_store_registers, procfs_resume): Adjust.
7035 (procfs_open): Delete.
7036 (procfs_suppress_run): Delete.
7037 (procfs_can_run): Delete.
7038 (procfs_mourn_inferior): Adjust.
7039 (procfs_init_inferior): Add target_ops parameter. Adjust.
7040 (procfs_create_inferior): Don't pass procfs_init_inferior to
7041 fork_inferior. Instead call it after fork_inferior returns.
7042 (procfs_find_new_threads): Adjust.
7043 (_initialize_procfs): Adjust to use procfs_target instead of
7045 * sol-thread.c (orig_core_ops, sol_core_ops): Delete.
7046 (lwp_to_thread): Use target_thread_alive.
7047 (sol_thread_open): Delete.
7048 (sol_thread_attach): Delete.
7049 (sol_thread_detach, sol_thread_resume, sol_thread_wait)
7050 (sol_thread_fetch_registers, sol_thread_store_registers): Adjust
7051 to use find_target_beneath.
7052 (sol_thread_prepare_to_store, sol_thread_xfer_memory): Delete.
7053 (sol_thread_xfer_partial): Adjust to use find_target_beneath.
7054 (sol_thread_files_info, sol_thread_kill_inferior): Delete.
7055 (check_for_thread_db): New.
7056 (sol_thread_notice_signals, sol_thread_create_inferior): Delete.
7057 (sol_thread_new_objfile): Call check_for_thread_db.
7058 (sol_thread_mourn_inferior): Adjust to use find_target_beneath.
7059 (sol_thread_can_run): Delete.
7060 (sol_thread_alive): Adjust to use find_target_beneath.
7061 (sol_thread_stop): Delete.
7062 (rw_common): Use target_write_memory or target_read_memory.
7063 (ps_lgetregs, ps_lgetfpregs): Use target_fetch_registers.
7064 (ps_lsetregs, ps_lsetfpregs): Use target_store_registers.
7065 (solaris_pid_to_str): Remove check for libthread_db initialization
7067 (sol_find_new_threads): Remove check for libthread_db
7068 initialization failing, or for an invalid inferior_ptid. Adjust
7069 to use find_target_beneath.
7070 (sol_core_open, sol_core_close, sol_core_detach,
7071 sol_core_files_info, sol_find_memory_regions,
7072 sol_make_note_section, ignore): Delete.
7073 (init_sol_thread_ops): Make it a thread_stratum target. Remove
7074 unneeded callback settings.
7075 (init_sol_core_ops): Delete.
7076 (_initialize_sol_thread): No longer call init_sol_core_ops, set
7077 procfs_suppress_run, or hack with core_ops.
7079 * target.h (struct target_ops): Add a target_ops * parameter to
7080 to_resume, to_fetch_registers, to_store_registers, to_thread_alive
7081 and to_find_new_threads.
7082 (target_fetch_registers, target_store_registers)
7083 (target_thread_alive, target_find_new_threads): Redeclare as
7086 * target.c (update_current_target): Do not inherit or de_fault
7087 to_resume, to_fetch_registers, to_store_registers,
7088 to_thread_alive, to_find_new_threads.
7089 (target_resume): Adjust.
7090 (target_thread_alive, target_find_new_threads): New.
7091 (debug_to_resume, debug_to_fetch_registers): Delete.
7092 (target_fetch_registers): New.
7093 (debug_to_store_registers): Delete.
7094 (target_store_registers): New.
7095 (debug_to_thread_alive, debug_to_find_new_threads): Delete.
7096 (setup_target_debug): Adjust.
7098 * gdbcore.h (core_ops): Delete declaration.
7100 * inf-ptrace.c, linux-nat.c, remote.c, amd64-linux-nat.c,
7101 inf-child.c, linux-thread-db.c, bsd-uthread.c, inf-ttrace.c,
7102 i386-sol2-tdep.c, darwin-nat.c, gnu-nat.c, go32-nat.c,
7103 hpux-thread.c, i386-linux-nat.c, i386fbsd-nat.c, monitor.c,
7104 nto-procfs.c, remote-m32r-sdi.c, remote-mips.c, windows-nat.c,
7105 alphabsd-nat.c, amd64bsd-nat.c, arm-linux-nat.c, armnbsd-nat.c,
7106 bsd-kvm.c, hppa-hpux-nat.c, hppa-linux-nat.c, hppabsd-nat.c,
7107 hppanbsd-nat.c, i386-darwin-nat.c, i386bsd-nat.c,
7108 ia64-linux-nat.c, m32r-linux-nat.c, m68kbsd-nat.c,
7109 m68klinux-nat.c, m88kbsd-nat.c, mips-linux-nat.c,
7110 mips64obsd-nat.c, mipsnbsd-nat.c, ppc-linux-nat.c, ppcnbsd-nat.c,
7111 ppcobsd-nat.c, remote-sim.c, rs6000-nat.c, s390-nat.c,
7112 shnbsd-nat.c, sparc-nat.c, sparc-nat.h, spu-linux-nat.c,
7113 vaxbsd-nat.c, xtensa-linux-nat.c: Adjust to target_ops changes.
7115 * gdbarch.sh (core_pid_to_str): New gdbarch callback.
7116 * gdbarch.h, gdbarch.c: Regenerate.
7118 * sol2-tdep.c: Include "inferior.h".
7119 (sol2_core_pid_to_str): New.
7120 * sol2-tdep.h (sol2_core_pid_to_str): Declare.
7122 * amd64-sol2-tdep.c (amd64_sol2_init_abi): Set it.
7123 * sparc-sol2-tdep.c (sparc32_sol2_init_abi): Set it.
7124 * sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Set it.
7125 * i386-sol2-tdep.c (i386_sol2_init_abi): Set it.
7127 2009-02-22 Doug Evans <dje@google.com>
7129 * exec.c (exec_file_attach): Fix comment.
7131 2009-02-22 Pedro Alves <pedro@codesourcery.com>
7133 Silence a few -Wmissing-prototypes warnings.
7136 * alpha-linux-tdep.c (alpha_linux_regset_from_core_section): Make
7138 * alpha-osf1-tdep.c (_initialize_alpha_osf1_tdep): Declare.
7139 * amd64fbsd-tdep.c (amd64fbsd_init_abi): Make it static.
7140 * amd64nbsd-tdep.c (_initialize_amd64nbsd_ndep): Rename to ...
7141 (_initialize_amd64nbsd_tdep): ... this.
7142 * arm-linux-tdep.c (arm_linux_software_single_step): Make it static.
7143 (_initialize_arm_linux_tdep): Declare.
7144 * armbsd-tdep.c (armbsd_fpreg_offset): Make it static.
7145 * armnbsd-tdep.c (_initialize_arm_netbsd_tdep): Declare.
7146 * armobsd-tdep.c (_initialize_armobsd_tdep): Declare.
7147 * avr-tdep.c (avr_return_value): Make it static.
7148 (avr_frame_unwind_cache): Ditto.
7149 * bsd-uthread.c (bsd_uthread_inferior_created): Ditto.
7150 (bsd_uthread_solib_loaded): Ditto.
7151 (bsd_uthread_solib_unloaded): Ditto.
7152 (bsd_uthread_target): Ditto.
7153 (_initialize_bsd_uthread): Declare.
7154 * cris-tdep.c (crisv32_single_step_through_delay): Make it static.
7155 (cris_frame_unwind_cache): Ditto.
7156 * frv-tdep.c (frv_return_value): Ditto.
7157 * h8300-tdep.c (h8300_use_struct_convention): Ditto.
7158 (h8300h_use_struct_convention): Ditto.
7159 * hppa-tdep.c (hppa_sign_extend, hppa_low_hppa_sign_extend):
7161 * hppa-tdep.h (hppa_low_sign_extend, hppa_sign_extend): Delete
7163 * hppabsd-tdep.c: Include hppabsd-tdep.h.
7164 (hppabsd_find_global_pointer): Make it static.
7165 * hppabsd-tdep.h: New.
7166 * hppanbsd-tdep.c: Include hppabsd-tdep.h.
7167 (hppabsd_init_abi): Remove declaration.
7168 (_initialize_hppabsd_tdep): Remove declaration.
7169 (_initialize_hppanbsd_tdep): Declare.
7170 * hppaobsd-tdep.c: Include hppabsd-tdep.h.
7171 (hppabsd_init_abi): Delete declaration.
7172 (hppaobsd_init_abi): Make it static.
7173 * i386-nto-tdep.c (_initialize_i386nto_tdep): Declare.
7174 * i386nbsd-tdep.c (_initialize_i386nbsd_tdep): Declare.
7175 * ia64-linux-tdep.c (_initialize_ia64_linux_tdep): Declare.
7176 * ia64-tdep.c (ia64_register_reggroup_p): Make it static.
7177 * iq2000-tdep.c (_initialize_iq2000_tdep): Declare.
7178 * m32c-tdep.c (m32c_register_reggroup_p): Make it static.
7179 (m32c_analyze_prologue, m32c_virtual_frame_pointer): Ditto.
7180 (_initialize_m32c_tdep): Declare.
7181 * m32r-rom.c (_initialize_m32r_rom): Declare.
7182 * m32r-tdep.c (m32r_skip_prologue): Make it static.
7183 (m32r_return_value): Ditto.
7184 * m68hc11-tdep.c (m68hc11_frame_unwind_cache): Make it static.
7185 (m68hc11_return_value): Ditto.
7186 * m68klinux-tdep.c (_initialize_m68k_linux_tdep): Declare.
7187 * m88k-tdep.c (m88k_frame_cache): Make it static.
7188 * mep-tdep.c (mep_gdb_print_insn): Ditto.
7189 (mep_return_value): Ditto.
7190 (_initialize_mep_tdep): Declare.
7191 * mips-irix-tdep.c (_initialize_mips_irix_tdep): Declare.
7192 * mips-linux-tdep.c (supply_64bit_reg): Make it static.
7193 (mips_linux_syscall_next_pc): Ditto.
7194 (_initialize_mips_linux_tdep): Declare.
7195 * mips-tdep.c (mips_single_step_through_delay): Make it static.
7196 * mipsnbsd-tdep.c (_initialize_mipsnbsd_tdep): Declare.
7197 * mn10300-linux-tdep.c (_initialize_mn10300_linux_tdep): Declare.
7198 * mn10300-tdep.c (_initialize_mn10300_tdep): Declare.
7199 * mt-tdep.c (_initialize_mt_tdep): Declare.
7200 * nbsd-tdep.c: Include nbsd-tdep.h.
7201 * nto-tdep.c (find_load_phdr): Make it static.
7202 (_initialize_nto_tdep): Declare.
7203 * ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Make it
7205 (_initialize_ppc_linux_tdep): Declare.
7206 * remote-m32r-sdi.c (m32r_can_use_hw_watchpoint)
7207 (m32r_insert_watchpoint, m32r_remove_watchpoint)
7208 (m32r_stopped_data_address, m32r_stopped_by_watchpoint): Make
7210 * rs6000-aix-tdep.c (_initialize_rs6000_aix_tdep): Declare.
7211 * rs6000-nat.c: Include xcoffread.h.
7212 (find_toc_address): Don't extern declare get_toc_offset. Adjust
7213 to call xcoff_get_to_offset.
7214 * rs6000-tdep.c (ppc_vsx_support_p, ppc_displaced_step_fixup)
7215 (rs6000_skip_main_prologue, rs6000_in_solib_return_trampoline)
7216 (rs6000_skip_trampoline_code): Make static.
7217 * s390-tdep.c (s390_regset_from_core_section): Ditto.
7218 * sh-tdep.c (sh_register_reggroup_p): Ditto.
7219 * shnbsd-tdep.c (shnbsd_regset_from_core_section): Ditto.
7220 (_initialize_shnbsd_tdep): Declare.
7221 * solib-frv.c (displacement_from_map): Make static.
7222 (_initialize_frv_solib): Declare.
7223 * solib-irix.c (fetch_lm_info): Make static.
7224 (_initialize_irix_solib): Declare.
7225 * solib-som.c: Include solib-som.h.
7226 (som_solib_select): Line break.
7227 * sparc-tdep.c (sparc_regset_from_core_section): Make static.
7228 * sparcnbsd-tdep.c (_initialize_sparnbsd_tdep): Rename to ...
7229 (_initialize_sparcnbsd_tdep): ... this.
7230 * spu-tdep.c (spu_software_single_step): Make it static.
7231 (_initialize_spu_tdep): Declare.
7232 * vax-tdep.c (vax_frame_cache): Make it static.
7233 * xcoffread.c: Include xcoffread.h.
7234 (get_toc_offset): Rename to ...
7235 (xcoff_get_toc_offset): ... this.
7236 (_initialize_xcoffread): Declare.
7238 * xtensa-linux-tdep.c (_initialize_xtensa_linux_tdep): Declare.
7239 * xtensa-tdep.c (xtensa_skip_prologue, xtensa_derive_tdep): Make
7241 (_initialize_xtensa_tdep): Declare.
7243 2008-02-21 Pedro Alves <pedro@codesorcery.com>
7245 Silence a few -Wmissing-prototypes warnings.
7248 * amd64-nat.c: Include "amd64-nat.h".
7249 * fork-child.c (_initialize_fork_child): Ditto.
7250 * gcore.c (_initialize_gcore): Ditto.
7251 * inf-ptrace.c: Include "inf-ptrace.h".
7252 (inf_ptrace_store_registers): Make it static.
7253 * linux-nat.c (linux_nat_terminal_ours): Make it static.
7254 (_initialize_linux_nat): Declare before definition.
7255 * linux-tdep.c: Include "linux-tdep.h".
7256 * linux-thread-db.c (_initialize_thread_db): Declare before
7258 * proc-service.c (_initialize_proc_service): Ditto.
7259 * remote.c (remote_send_printf): Make it static.
7260 * solib.c: Include "solib.h".
7261 * symfile-mem.c (_initialize_symfile_mem): Declare before
7263 * ada-lang.c (ada_la_decode, ada_match_name)
7264 (ada_suppress_symbol_printing, ada_is_array_type)
7265 (ada_value_ptr_subscript, ada_array_length)
7266 (ada_to_static_fixed_value): Make them static.
7267 (_initialize_ada_language): Declare before definition.
7268 * ada-tasks.c (ada_get_task_number, ada_get_environment_task)
7269 (ada_task_list_changed, ada_new_objfile_observer): Make them
7271 (_initialize_tasks): Declare before definition.
7272 * addrmap.c (_initialize_addrmap): Declare before definition.
7273 * auxv.c (default_auxv_parse): Make it static.
7274 * bfd-target.c (target_bfd_xfer_partial, target_bfd_xclose): Make
7276 * breakpoint.c (remove_sal): Add line break.
7277 (expand_line_sal_maybe): Make it static.
7278 * cp-name-parser.y: Include "cp-support.h".
7279 * cp-valprint.c (cp_find_class_member): Make it static.
7280 * eval.c (value_f90_subarray): Ditto.
7281 * exceptions.c (print_any_exception): Ditto.
7282 * findcmd.c (_initialize_mem_search): Declare before definition.
7283 * frame.c (frame_observer_target_changed): Make it static.
7284 * gnu-v3-abi.c (gnuv3_find_method_in): Make it static.
7285 * inf-child.c: Include "inf-child.h".
7286 * inferior.h (valid_inferior_id): Rename to ...
7287 (valid_gdb_inferior_id): ... this.
7288 * infrun.c (infrun_thread_stop_requested, siginfo_make_value):
7290 * jv-lang.c (java_language_arch_info): Make it static.
7291 * m2-typeprint.c (m2_get_discrete_bounds): Ditto.
7292 * osdata.c (info_osdata_command): Make it static.
7293 * regcache.c (regcache_observer_target_changed): Make it static.
7294 * reverse.c (_initialize_reverse): Declare before definition.
7295 * stabsread.c (cleanup_undefined_types_noname)
7296 (cleanup_undefined_types_1): Make them static.
7297 * symfile.c (place_section): Make it static.
7298 * symtab.c (find_pc_sect_psymtab_closer): Make it static.
7299 * target-descriptions.c (_initialize_target_descriptions): Declare
7301 * target.c (default_get_ada_task_ptid, find_default_can_async_p)
7302 (find_default_is_async_p, find_default_supports_non_stop): Make
7304 (target_supports_non_stop): Add prototype.
7305 (dummy_pid_to_str): Make it static.
7306 * utils.c (_initialize_utils): Declare before definition.
7307 * ada-exp.y (_initialize_ada_exp): Declare before definition.
7308 * solib-svr4.c (HAS_LM_DYNAMIC_FROM_LINK_MAP): Add a prototype.
7309 * target.h (struct target_ops): Add a prototype to the
7310 to_can_execute_reverse callback.
7311 * macroscope.c (_initialize_macroscope): Declare before definition.
7312 * cp-namespace.c (_initialize_cp_namespace): Declare before definition.
7313 * python/python.c (_initialize_python): Declare before definition.
7314 * tui/tui-command.c: Include "tui/tui-command.h".
7315 * tui/tui-data.c (init_content_element, init_win_info): Make them
7317 * tui/tui-disasm.c: Include "tui/tui-disasm.h".
7318 * tui/tui-interp.c (_initialize_tui_interp): Declare before
7320 * tui/tui-layout.c: Include "tui/tui-layout.h".
7321 (_initialize_tui_layout): Declare before definition.
7322 * tui/tui-regs.c: Include "tui/tui-regs.h".
7323 (tui_display_reg_element_at_line): Make it static.
7324 (_initialize_tui_regs): Declare before definition.
7325 * tui/tui-stack.c (_initialize_tui_stack): Declare before
7327 * tui/tui-win.c: Include "tui/tui-win.h".
7328 (_initialize_tui_win): Declare before definition.
7329 (tui_sigwinch_handler): Make it static. Wrap in ifdef SIGWINCH.
7330 * tui/tui-win.h (tui_sigwinch_handler): Delete declaration.
7331 (tui_get_cmd_list): Add a prototype.
7332 * tui/tui-windata.c: Include tui-windata.h.
7333 * tui/tui-wingeneral.c (box_win): Make it static.
7334 * cli/cli-logging.c (show_logging_command): Make it static.
7335 (_initialize_cli_logging): Declare before definition.
7336 * mi/mi-common.c (_initialize_gdb_mi_common): Declare before
7339 2009-02-20 Pierre Muller <muller@ics.u-strasbg.fr>
7341 Extend use of i386_use_watchpoints to all i386 native files
7342 using hardware watchpoints.
7343 * go32-nat.c (init_go32_ops): Call i386_use_watchpoints.
7344 * i386fbsd-nat.c (_initialize_i386fbsd_nat): Ditto.
7345 * windows-nat.c (init_windows_ops): Ditto.
7346 * config/i386/nm-cygwin.h: Define I386_WATCHPOINTS_IN_TARGET_VECTOR.
7347 * config/i386/nm-cygwin64.h: Ditto.
7348 * config/i386/nm-fbsd.h: Ditto.
7349 * config/i386/nm-go32.h: Ditto.
7351 2009-02-19 Joel Brobecker <brobecker@adacore.com>
7353 * ada-typeprint.c (ada_typedef_print): Remove. Unused.
7355 2009-02-18 Vladimir Prus <vladimir@codesourcery.com>
7357 * mi/mi-interp.c (mi_solib_loaded, mi_solib_unloaded): New.
7358 (mi_interpreter_init): Register the above.
7359 * solib.c (clear_solib): Notify solib unload.
7360 * breakpoint.c (disable_breakpoints_in_unloaded_shlib): Do not
7361 disable breakpoints on a.out targets.
7363 2009-02-17 Vladimir Prus <vladimir@codesourcery.com>
7365 * observer.c (observer_test_first_notification_function)
7366 (observer_test_second_notification_function)
7367 (observer_test_third_notification_function): Adjust prototype.
7369 2009-02-17 Pedro Alves <pedro@codesourcery.com>
7371 * Makefile.in (ALL_64_TARGET_OBS): Add amd64-dicos-tdep.o.
7372 (ALL_TARGET_OBS): Add dicos-tdep.o.
7373 (ALLDEPFILES): Add amd64-dicos-tdep.c and dicos-tdep.c.
7374 * configure.tgt (i[34567]86-*-dicos*): Add dicos-tdep.o to
7376 (x86_64-*-dicos*): Add dicos-tdep.o and amd64-dicos-tdep.o to
7378 * dicos-tdep.h, dicos-tdep.c: New.
7379 * amd64-dicos-tdep.c: New.
7380 * i386-dicos-tdep.c: Don't include solib.h, solib-target.h or
7381 inferior.h. Include dicos-tdep.h.
7382 (i386_dicos_init_abi): Call dicos_init_abi.
7383 (i386_dicos_bfd_has_symbol_p): Delete.
7384 (i386_dicos_osabi_sniffer): Use dicos_load_module_p.
7386 * NEWS: Mention x86-64 DICOS target support.
7388 2009-02-16 Doug Evans <dje@google.com>
7390 * amd64-tdep.c (amd64_skip_prefixes): Renamed from skip_prefixes.
7391 All callers updated.
7392 (amd64_get_insn_details): Handle more 3-byte opcode insns.
7393 (amd64_breakpoint_p): Delete.
7394 (amd64_displaced_step_fixup): When fixing up after stepping an int3,
7395 don't back up pc to the start of the int3.
7396 * i386-tdep.c: #include opcode/i386.h.
7397 (i386_skip_prefixes): New function.
7398 (i386_absolute_jmp_p): Constify argument.
7399 (i386_absolute_call_p,i386_ret_p,i386_call_p,i386_syscall_p): Ditto.
7400 (i386_breakpoint_p): Delete.
7401 (i386_displaced_step_fixup): Handle unnecessary or redundant prefixes.
7402 When fixing up after stepping an int3, don't back up pc to the start
7405 2009-02-16 Pedro Alves <pedro@codesourcery.com>
7407 * corelow.c (core_close): Don't hardcode the core's pid.
7408 (core_open): Find core threads before calling
7409 post_create_inferior.
7410 (add_to_thread_list, get_core_register_section): Take into account
7411 systems where the regset section names encode the pid of the
7414 * gdbarch.sh (core_reg_section_encodes_pid): New gdbarch setting.
7415 * gdbarch.h, gdbarch.c: Regenerate.
7417 * amd64-sol2-tdep.c (amd64_sol2_init_abi): Set it.
7418 * i386-sol2-tdep.c (i386_sol2_init_abi): Set it.
7419 * sparc-sol2-tdep.c (sparc32_sol2_init_abi): Set it.
7420 * sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Set it.
7422 2009-02-14 Vladimir Prus <vladimir@codesourcery.com>
7424 Include frame information for *stopped due to CLI commands.
7426 * ada-tasks.c (ada_normal_stop_observer): Adjust prototype.
7427 * infcmd.c (finish_command_continuation): Pass '1' for
7428 'print_frame' parameter to the observer.
7429 * infrun.c (normal_stop): Don't print mi-specific information
7430 here. Pass 'stop_print_frame' to the 'print_frame' parameter
7432 * mi/mi-interp.c (mi_on_normal_stop): Adjust prototype.
7433 If we need to print frame, and current uiout is not the MI one,
7436 2009-02-13 Pierre Muller <muller@ics.u-strasbg.fr>
7438 * xtensa-tdep.c (call0_analyze_prologue): Delete BSZ macro.
7439 Replace BSZ macro uses by XTENSA_ISA_BSZ macro.
7441 2009-02-12 Jan Kratochvil <jan.kratochvil@redhat.com>
7444 * dwarf2read.c (process_die <DW_TAG_module>, read_module)
7445 (scan_partial_symbols <DW_TAG_module>, add_partial_module): New.
7447 2009-02-11 Pierre Muller <muller@ics.u-strasbg.fr>
7449 * dwarf2read.c (read_base_type): Set code to TYPE_CODE_CHAR
7450 for DW_ATE_signed_char and DW_ATE_unsigned_char
7451 for pascal language.
7453 2009-02-11 Jim Meyering <meyering@redhat.com>
7454 Jan Kratochvil <jan.kratochvil@redhat.com>
7456 Avoid NULL dereference.
7457 * stack.c (return_command): Guard use of SYMBOL_TYPE (thisfun).
7458 New variable func_type.
7460 2009-02-11 Pedro Alves <pedro@codesourcery.com>
7462 * gdbarch.c: Regenerate.
7464 2009-02-10 Pierre Muller <muller@ics.u-strasbg.fr>
7466 * p-lang.c (is_pascal_string_type): Fix comment.
7467 Determine exact size of char elements for GPC
7469 (pascal_printstr): Handle char width of 2 or 4.
7470 * p-valprint.c (pascal_val_print): Handle char
7473 2009-02-07 Daniel Jacobowitz <dan@codesourcery.com>
7475 * dwarf2read.c (dwarf2_build_psymtabs_hard): Move lowpc and highpc
7476 inside the loop. Only call addrmap_set_empty if the compilation unit
7477 had DW_AT_high_pc and DW_AT_low_pc. Update call to
7478 scan_partial_symbols.
7479 (scan_partial_symbols): Take NEED_PC argument and pass it along with
7481 (add_partial_namespace): Take NEED_PC argument and pass it through.
7482 (add_partial_subprogram): Take NEED_PC argument. Update the addrmap
7485 2009-02-07 Pedro Alves <pedro@codesourcery.com>
7487 * NEWS: Mention inspecting extra signal information, $_siginfo,
7488 and the qXfer:siginfo:read and qXfer:siginfo:write packets.
7490 2009-02-07 Pedro Alves <pedro@codesourcery.com>
7492 * linux-nat.c (PTRACE_SETSIGINFO): Define if PTRACE_GETSIGINFO
7495 2009-02-06 Pedro Alves <pedro@codesourcery.com>
7497 * amd64-linux-nat.c (compat_int_t, compat_uptr_t, compat_time_t)
7498 (compat_timer_t, compat_clock_t, struct compat_timeval)
7499 (compat_sigval_t, compat_siginfo_t): New types.
7500 (cpt_si_pid, cpt_si_uid, cpt_si_timerid, cpt_si_overrun)
7501 (cpt_si_status, cpt_si_utime, cpt_si_stime, cpt_si_ptr)
7502 (cpt_si_addr, cpt_si_band, cpt_si_fd): New defines.
7503 (compat_siginfo_from_siginfo, siginfo_from_compat_siginfo)
7504 (amd64_linux_siginfo_fixup): New.
7505 * linux-nat.c (linux_nat_siginfo_fixup): New.
7506 (siginfo_fixup): New.
7507 (linux_xfer_siginfo): Use siginfo_fixup to convert between the
7508 siginfo layout expected by ptrace and the siginfo layout of the
7510 (linux_nat_set_siginfo_fixup): New.
7511 * linux-nat.h (linux_nat_set_siginfo_fixup): Declare.
7513 2009-02-06 Pedro Alves <pedro@codesourcery.com>
7515 * target.h (enum target_object): Add new TARGET_OBJECT_SIGNAL_INFO.
7516 * infrun.c (siginfo_value_read, siginfo_value_write): New.
7517 (siginfo_value_funcs): New.
7518 (siginfo_make_value): New.
7519 (_initialize_infrun): Create the $_siginfo convenience variable.
7520 * gdbtypes.h (append_composite_type_field_aligned): Declare.
7521 * gdbtypes.c (append_composite_type_field): Rename to...
7522 (append_composite_type_field_aligned): ... this. Add ALIGNMENT
7523 argument. Handle it.
7524 (append_composite_type_field): Rewrite on top of
7525 append_composite_type_field_aligned.
7526 * value.h (internalvar_make_value): New typedef.
7527 (struct internalvar) <make_value>: New field.
7528 (create_internalvar_type_lazy): Declare.
7529 * value.c (create_internalvar): Clear make_value.
7530 (create_internalvar_type_lazy): New.
7531 (value_of_internalvar): If make_value is set use it.
7532 (preserve_values): Skip internal variables that don't have a
7534 * gdbarch.sh (get_siginfo_type): New.
7535 * gdbarch.h, gdbarch.c: Regenerate.
7537 * linux-tdep.h, linux-tdep.c: New.
7538 * amd64-linux-tdep.c: Include "linux-tdep.h".
7539 (amd64_linux_init_abi): Register linux_get_siginfo_type and
7540 linux_get_siginfo_mapper.
7541 * i386-linux-tdep.c: Include "linux-tdep.h".
7542 (i386_linux_init_abi): Register linux_get_siginfo_type and
7543 linux_get_siginfo_mapper.
7544 * arm-linux-tdep.c: Include "linux-tdep.h".
7545 (i386_linux_init_abi): Register linux_get_siginfo_type and
7546 linux_get_siginfo_mapper.
7548 * linux-nat.c (linux_xfer_siginfo): New.
7549 (linux_nat_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO.
7550 * remote.c (PACKET_qXfer_siginfo_read)
7551 (PACKET_qXfer_siginfo_write): New.
7552 (feature remote_protocol_features): Add "qXfer:siginfo:read" and
7553 "qXfer:siginfo:write" features.
7554 (remote_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO.
7555 (_initialize_remote): Add "set/show remote read-siginfo-object"
7556 and "set/show remote write-siginfo-object" commands.
7558 * Makefile.in (ALL_TARGET_OBS): Add linux-tdep.o.
7559 (HFILES_NO_SRCDIR): Add linux-tdep.h.
7560 (ALLDEPFILES): Add linux-tdep.c.
7562 * configure.tgt (arm*-*-linux* | arm*-*-uclinux*)
7563 (i[34567]86-*-linux*, x86_64-*-linux*): Add linux-tdep.o to
7566 2009-02-06 Jim Blandy <jimb@codesourcery.com>
7567 Daniel Jacobowitz <dan@codesourcery.com>
7568 Vladimir Prus <vladimir@codesourcery.com>
7569 Pedro Alves <pedro@codesourcery.com>
7571 * defs.h (enum lval_type): New value: lval_computed.
7572 * value.h (struct lval_funcs): New type.
7573 (allocate_computed_value, value_computed_funcs)
7574 (value_computed_closure): New declarations.
7575 * value.c (struct value): Add a structure to the location union
7576 for computed lvalues, containing 'funcs' and 'closure' members.
7577 (allocate_computed_value, value_computed_funcs)
7578 (value_computed_closure): New functions.
7579 (value_free): For computed lvalues, call the closure's
7580 'free_closure' function before freeing the value itself.
7581 (value_copy): If we're copying an lval_computed value, call the
7582 closure's 'copy_closure' function.
7583 (set_value_component_location): If the original value is a
7584 computed lvalue, then call the closure's 'copy_closure' function.
7585 (value_of_internalvar): If an internal variable's value is a
7586 computed lvalue, make retrieving its value produce an equivalent
7588 * valops.c (value_fetch_lazy): Unlazy computed lvalues by calling
7589 their read function.
7590 (value_assign): Assign to computed lvalues by calling their write
7593 2009-02-06 Pedro Alves <pedro@codesourcery.com>
7595 * linux-nat.c (linux_nat_wait): Adjust.
7596 (linux_nat_pid_to_str): Adjust. Remove call to thread_db_init.
7597 * linux-nat.h (thread_db_init): Delete declaration.
7598 * linux-thread-db.c (target_beneath): Delete.
7599 (thread_db_init): Delete.
7600 (thread_db_detach): Use find_target_beneath.
7601 (thread_db_wait): Adjust interface. Use find_target_beneath.
7602 (thread_db_mourn_inferior): Use find_target_beneath.
7603 (thread_db_can_async_p, thread_db_is_async_p, thread_db_async)
7604 (thread_db_async_mask): Delete.
7605 (thread_db_pid_to_str): Adjust interface. Use
7606 find_target_beneath.
7607 (thread_db_get_thread_local_address): Adjust interface. Use
7608 find_target_beneath.
7609 (init_thread_db_ops): Delete references to delete functions.
7610 * target.c (update_current_target): Don't inherit or default
7611 to_wait. Don't inherit to_pid_to_str and
7612 to_get_thread_local_address.
7613 (target_translate_tls_address): Look for a pushed target that
7614 implements to_get_thread_local_address, and use it instead of
7615 checking for target_get_thread_local_address_p.
7616 (target_wait, target_pid_to_str): Reimplement as functions.
7617 (dummy_pid_to_str): New.
7618 (init_dummy_target): Register it.
7619 (debug_to_wait): Delete.
7620 * target.h (struct target_ops): Make to_wait, to_pid_to_str and
7621 to_get_thread_local_address accept a pointer to struct target_ops.
7622 (target_wait): Delete macro, and declare as function.
7623 (target_pid_to_str): Likewise.
7624 (target_get_thread_local_address)
7625 (target_get_thread_local_address_p): Delete.
7626 (noprocess): Add NORETURN and ATTR_NORETURN tags.
7627 * inf-ptrace.c (inf_ptrace_wait): Adjust.
7628 (inf_ptrace_pid_to_str): New.
7629 (inf_ptrace_target): Use inf_ptrace_pid_to_str.
7630 * aix-thread.c (aix_thread_wait, aix_thread_pid_to_str): Adjust.
7631 * bsd-kvm.c (bsd_kvm_pid_to_str): Adjust.
7632 * bsd-uthread.c (bsd_uthread_wait, bsd_uthread_pid_to_str):
7634 * corelow.c (core_pid_to_str): Adjust.
7635 * darwin-nat.c (darwin_wait, darwin_pid_to_str): Adjust.
7636 * dec-thread.c (dec_thread_wait, dec_thread_pid_to_str): Adjust.
7637 * gnu-nat.c (gnu_wait, gnu_pid_to_str): Adjust.
7638 * go32-nat.c (go32_wait, go32_pid_to_str): Adjust.
7639 * hpux-thread.c (hpux_thread_wait): Adjust.
7640 * inf-ttrace.c (inf_ttrace_wait, inf_ttrace_pid_to_str): Adjust.
7641 * monitor.c (monitor_wait, monitor_pid_to_str): Adjust.
7642 * nto-procfs.c (procfs_wait, procfs_pid_to_str): Adjust.
7643 * procfs.c (procfs_pid_to_str): Adjust.
7644 * remote-m32r-sdi.c (m32r_wait, m32r_pid_to_str): Adjust.
7645 * remote-mips.c (mips_wait): Adjust.
7646 * remote-sim.c (gdbsim_wait, gdbsim_pid_to_str): Adjust.
7647 * remote.c (remote_wait, remote_pid_to_str)
7648 (remote_get_thread_local_address): Adjust.
7649 * rs6000-nat.c (rs6000_wait): Adjust.
7650 * sol-thread.c (procfs_pid_to_str): Adjust declaration.
7651 (sol_thread_wait, solaris_pid_to_str): Adjust.
7652 * spu-linux-nat.c (spu_child_wait): Adjust.
7653 * windows-nat.c (windows_wait, windows_pid_to_str): Adjust.
7655 2009-02-06 Tom Tromey <tromey@redhat.com>
7657 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-cmd.o.
7658 (SUBDIR_PYTHON_SRCS): Add python-cmd.c.
7659 (python-cmd.o): New target.
7660 * cli/cli-decode.c (set_cmd_completer): Add self parameter to
7661 completer prototype.
7662 (add_cmd): Initialize destroyer member of cmd_list_element. Use
7663 make_symbol_completion_list_fn as completer.
7664 (delete_cmd): Call destroyer if one is set.
7665 * cli/cli-decode.h (cmd_list_element): Add cmd parameter to
7666 completer member. Add destroyer member.
7667 (set_cmd_completer): Add self parameter to
7668 completer prototype.
7669 * command.h (set_cmd_completer): Add cmd parameter to
7670 completer prototype.
7671 * completer.c (noop_completer, filename_completer,
7672 location_completer, expression_completer, command_completer): Adapt
7673 to new completer prototype.
7674 (complete_line_internal): Pass new parameter to completer function.
7675 * completer.h (noop_completer, filename_completer,
7676 location_completer, expression_completer, command_completer): Adapt
7677 prototypes to new completer prototype.
7678 * interps.c (interpreter_completer): Adapt to new completer
7680 * python/python-cmd.c: New file.
7681 * python/python-internal.h (gdbpy_initialize_commands): Add
7683 (gdbpy_doc_cst): Add forward declaration.
7684 * python/python.c (gdbpy_doc_cst): Declare.
7685 (_initialize_python): Call gdbpy_initialize_commands. Initialize
7687 * symtab.c (make_symbol_completion_list_fn): New function.
7688 * symtab.h (make_symbol_completion_list_fn): Add prototype.
7690 2009-02-06 Pedro Alves <pedro@codesourcery.com>
7692 * target.c (target_get_osdata): Check for equal or higher than
7693 process_stratum, not dummy_stratum.
7695 2009-02-06 Pedro Alves <pedro@codesourcery.com>
7697 * remote.c (extended_remote_can_run): Delete.
7698 (init_remote_ops): Don't register it.
7699 * target.c (target_get_osdata): Don't check for target_can_run.
7700 Instead any target that has already been pushed, otherwise
7701 fallback to the default run target.
7703 2009-02-06 Pedro Alves <pedro@codesourcery.com>
7705 * target.c (target_create_inferior, target_detach)
7706 (target_mourn_inferior, target_attach, target_close): Do target
7708 (debug_to_attach, debug_to_detach, debug_to_create_inferior)
7709 (debug_to_mourn_inferior, debug_to_close): Delete.
7710 (setup_target_debug): Adjust.
7712 2009-02-05 Pedro Alves <pedro@codesourcery.com>
7714 * target.h (target_stopped_data_address_p): Delete declaration,
7715 and don't define as macro.
7716 * target.c (target_stopped_data_address_p): Delete.
7718 2009-02-05 Thiago Jung Bauermann <bauerman@br.ibm.com>
7719 Tom Tromey <tromey@redhat.com>
7721 * python/python-utils.c (target_string_to_unicode): New function.
7722 * python/python-internal.h (target_string_to_unicode): New prototype.
7723 * python/python-value.c (valpy_string): New function.
7724 (value_object_methods): Add `string' entry.
7726 2009-02-05 Pedro Alves <pedro@codesourcery.com>
7728 * target.h (target_tid_to_str): Delete.
7729 * thread.c (print_thread_info, thread_apply_all_command)
7730 (thread_apply_command, thread_command, do_captured_thread_select):
7731 Use target_pid_to_str instead of target_tid_to_str.
7732 * linux-fork.c (delete_fork_command): Likewise.
7734 2009-02-05 Pedro Alves <pedro@codesourcery.com>
7736 * frame.c (has_stack_frames): Make public.
7737 (get_prev_frame): Don't allow a NULL this_frame anymore.
7738 * frame.h (has_stack_frames): Declare.
7739 * varobj.c (find_frame_addr_in_frame_chain): Don't ever pass NULL
7740 to get_prev_frame, instead start at get_current_frame.
7741 (varobj_create): Check has_stack_frames before getting any frame;
7742 eliminate one usage of deprecated_safe_get_selected_frame.
7744 2009-02-05 Tom Tromey <tromey@redhat.com>
7745 Thiago Jung Bauermann <bauerman@br.ibm.com>
7747 * python/python.c (GdbMethods): Move to bottom of file.
7748 (get_parameter, execute_gdb_command, gdbpy_write,
7749 gdbpy_flush): Remove forward declarations.
7750 (eval_python_from_control_command): Fix error checking of function
7751 PyRun_SimpleString. Fix error string.
7752 (python_command): Likewise.
7753 (execute_gdb_command): Added from_tty argument.
7755 2009-02-05 Thiago Jung Bauermann <bauerman@br.ibm.com>
7757 * language.h (language_dfn): Add la_get_string member.
7758 (LA_GET_STRING): New macro.
7759 (default_get_string): New prototype.
7760 * language.c (default_get_string): New function.
7761 (unknown_language_defn, auto_language_defn, local_language_defn): Use
7762 default_get_string for la_get_string.
7763 * c-lang.c (c_get_string): New function.
7764 (c_language_defn, cplus_language_defn, asm_language_defn): Use
7765 c_get_string for la_get_string.
7766 (minimal_language_defn): Likewise
7767 * ada-lang.c (ada_language_defn): Likewise.
7768 * f-lang.c (f_language_defn): Use default_get_string for
7770 * jv-lang.c (java_language_defn): Likewise.
7771 * m2-lang.c (m2_language_defn): Likewise.
7772 * objc-lang.c (objc_language_defn): Likewise.
7773 * p-lang.c (p_language_defn): Likewise.
7774 * scm-lang.c (scm_language_defn): Likewise.
7775 * typeprint.c (type_to_string): New function.
7776 * value.h (type_to_string): New prototype.
7777 * valprint.c (val_print_string): Factor out code for reading string
7778 from the inferior into its own function. Put 2 spaces after period
7780 (read_string): New function.
7781 * valprint.h (read_string): New prototype.
7783 2009-01-07 Pierre Muller <muller@ics.u-strasbg.fr>
7784 Tom Tromey <tromey@redhat.com>
7786 PR breakpoints/8079:
7787 * breakpoint.c (print_one_breakpoint): Use exp_string field
7788 to display expression of watchpoints.
7789 (mention): Likewise.
7790 (watch_command_1): Remove trailing whitespace from expression.
7791 * printcmd.c (struct display) <exp_string>: New field.
7792 (display_command): Set exp_string.
7793 (free_display): Free exp_string.
7794 (clear_displays): Use free_display.
7795 (do_one_display): Print exp_string.
7796 (display_info): Likewise.
7798 2009-02-04 Tom Tromey <tromey@redhat.com>
7799 Thiago Jung Bauermann <bauerman@br.ibm.com>
7800 Phil Muldoon <pmuldoon@redhat.com>
7802 * python/python-internal.h (gdbpy_get_value_from_history): Rename
7803 prototype to gdbpy_history.
7804 (gdbpy_is_string): Declare.
7805 (python_string_to_host_string): Declare.
7806 * python/python-utils.c (gdbpy_is_string): New function.
7807 (unicode_to_encoded_string): New function.
7808 (unicode_to_target_string): Use it.
7809 (python_string_to_host_string): New function.
7810 * python/python-value.c (valpy_address): New function.
7811 (convert_value_from_python): Use gdbpy_is_string. Change to throw
7812 Python exception instead of a GDB exception on error. Properly check
7814 (valpy_getitem): Convert field name to host string. Handle array
7815 accesses. Adapt to new behaviour of convert_value_from_python.
7816 (valpy_new): Adapt to new behaviour of convert_value_from_python.
7817 (enum valpy_opcode) <VALPY_LSH, VALPY_RSH, VALPY_BITAND,
7818 VALPY_BITXOR, VALPY_BITOR>: New constants.
7819 (valpy_binop): Update. Adapt to new behaviour of
7820 convert_value_from_python.
7821 (valpy_invert): New function.
7822 (valpy_lsh): Likewise.
7823 (valpy_rsh): Likewise.
7824 (valpy_and): Likewise.
7825 (valpy_or): Likewise.
7826 (valpy_xor): Likewise.
7827 (valpy_richcompare): Call convert_value_from_python instead of doing
7829 (is_intlike, valpy_int, valpy_long, valpy_float): New functions.
7830 (gdbpy_get_value_from_history): Rename
7831 function to gdbpy_history.
7832 (gdbpy_initialize_values): Don't set tp_new.
7833 (value_object_type): Add valpy_new.
7834 (value_object_methods): Add `address' entry.
7835 (value_object_as_number): Update for new methods.
7836 * python/python.c (GdbMethods): Rename entry from
7837 `get_value_from_history' to `history'.
7839 2009-02-04 Jerome Guitton <guitton@adacore.com>
7841 * ada-lang.c (ada_template_to_fixed_record_type_1): Check size
7842 of type to guard against a crash.
7844 2009-02-04 Jerome Guitton <guitton@adacore.com>
7846 * value.c (value_from_contents_and_address): Always return
7847 a lval_memory value, even if address is null.
7849 2009-02-04 Tristan Gingold <gingold@adacore.com>
7851 * i386-darwin-tdep.c (i386_darwin_sigcontext_addr): New function.
7852 (amd64_darwin_sigcontext_addr): Ditto.
7853 (darwin_dwarf_signal_frame_p): Ditto.
7854 (i386_darwin_init_abi): Handle signal frames, use the const for
7856 (x86_darwin_init_abi_64): Ditto.
7858 2009-02-04 Tristan Gingold <gingold@adacore.com>
7860 * i386-tdep.c (i386_sigtramp_p): Make it public.
7861 * i386-tdep.h (i386_sigtramp_p): Declare.
7863 2009-02-04 Tristan Gingold <gingold@adacore.com>
7865 * machoread.c (macho_symfile_read): Read minsymtab also from
7867 (macho_symfile_read): Try to read dwarf2 frame info from main
7868 object file, but not from OSO files.
7869 (macho_symfile_offsets): Update section names for latest BFD
7871 * i386-darwin-tdep.c (i386_darwin_init_abi): Call set_solib_ops.
7872 (x86_darwin_init_abi_64): Ditto.
7873 * solib-darwin.c: New file.
7874 * solib-darwin.h: New file.
7875 * configure.tgt: Add solib.o solib-darwin.o for Darwin.
7877 2009-02-04 Tristan Gingold <gingold@adacore.com>
7879 * solist.h (struct target_so_ops): Comment fallback behavior for
7882 2009-02-03 Tom Tromey <tromey@redhat.com>
7884 * completer.c (add_struct_fields): Check type_name against NULL
7887 2009-02-03 Joel Brobecker <brobecker@adacore.com>
7889 * MAINTAINERS: Update Elena's email address.
7891 2009-02-02 Joel Brobecker <brobecker@adacore.com>
7893 * breakpoint (update_watchpoint): Minor comment adjustment.
7895 2009-02-02 Tom Tromey <tromey@redhat.com>
7898 * completer.c (count_struct_fields): Count method names.
7899 (add_struct_fields): Add matching method names.
7901 2009-02-02 Doug Evans <dje@google.com>
7903 * configure.ac (gdbkt): Check both no_tcl/no_tk first, before
7904 doing any further tcl/tk configury. Don't configure gdbtk if
7905 tcl or tk check fails.
7906 * aclocal.m4: Regenerate.
7907 * configure: Regenerate.
7909 2009-02-02 Tom Tromey <tromey@redhat.com>
7912 * valops.c (find_overload_match): Follow typedefs before taking
7913 address of object argument.
7915 2009-02-01 Doug Evans <dje@google.com>
7917 * target.h (target_waitstatus_to_string): Declare.
7918 * target.c (target_waitstatus_to_string): New function. Copied from
7919 debug_to_wait. Add missing entries for TARGET_WAITKIND_SYSCALL_ENTRY,
7920 TARGET_WAITKIND_SYSCALL_RETURN, TARGET_WAITKIND_IGNORE,
7921 TARGET_WAITKIND_NO_HISTORY.
7922 (debug_to_wait): Call it.
7923 * infrun.c (wait_for_inferior): If debug_infrun, print result of
7925 (fetch_inferior_event): Ditto.
7927 2009-01-30 Tom Tromey <tromey@redhat.com>
7929 * Makefile.in (HFILES_NO_SRCDIR): Remove i386-cygwin-tdep.h.
7931 2009-01-30 Vladimir Prus <vladimir@codesourcery.com>
7934 * thread.c (do_captured_list_thread_ids): Report the current
7937 2009-01-30 Vladimir Prus <vladimir@codesourcery.com>
7939 * breakpoint.c (create_breakpoint, create_breakpoints)
7940 (break_command_really, set_breakpoint): New parameter enabled.
7941 (create_breakpoint, break_command_really): Make breakpoint
7942 disabled if so requested.
7943 * breakpoint.h (set_breakpoint): New parameter enabled.
7944 * mi/mi-cmd-break.c (mi_cmd_break_insert): Handle the -d option.
7946 2009-01-28 Doug Evans <dje@google.com>
7948 * amd64-tdep.h (amd64_displaced_step_copy_insn): Declare.
7949 (amd64_displaced_step_fixup): Declare.
7950 * amd64-tdep.c: #include opcode/i386.h, dis-asm.h.
7951 (amd64_arch_regmap): Move out of amd64_analyze_stack_align
7952 and make static global.
7953 (amd64_arch_regmap_len): New static global.
7954 (amd64_arch_reg_to_regnum): New function.
7955 (struct amd64_insn): New struct.
7956 (struct displaced_step_closure): New struct.
7957 (onebyte_has_modrm,twobyte_has_modrm): New static globals.
7958 (rex_prefix_p,skip_prefixes)
7959 (amd64_insn_length_fprintf,amd64_insn_length_init_dis)
7960 (amd64_insn_length,amd64_get_unused_input_int_reg)
7961 (amd64_get_insn_details,fixup_riprel,fixup_displaced_copy)
7962 (amd64_displaced_step_copy_insn)
7963 (amd64_absolute_jmp_p,amd64_absolute_call_p,amd64_ret_p)
7964 (amd64_call_p,amd64_breakpoint_p,amd64_syscall_p)
7965 (amd64_displaced_step_fixup): New functions.
7966 * amd64-linux-tdep.c: #include arch-utils.h.
7967 (amd64_linux_init_abi): Install displaced stepping support.
7969 2009-01-28 Daniel Jacobowitz <dan@codesourcery.com>
7970 Jerome Guitton <guitton@adacore.com>
7972 * configure, config.in: Regenerated.
7973 * configure.ac: Add --with-system-gdbinit.
7974 * main.c (get_init_files): New.
7975 (captured_main): Use get_init_files. Load system gdbinit before
7977 (print_gdb_help): Print location of init files.
7979 2009-01-28 Pedro Alves <pedro@codesourcery.com>
7981 * corefile.c (generic_search): Delete disabled code.
7982 * gdbcore.h (generic_search): Delete declaration.
7984 2009-01-26 Pedro Alves <pedro@codesourcery.com>
7986 * linux-nat.c (linux_child_follow_fork): Copy attach_flag from the
7987 parent to the child.
7988 * inf-ttrace.c (inf_ttrace_follow_fork): Likewise.
7989 * inf-ptrace.c (inf_ptrace_follow_fork): Likewise. Use
7990 remove_breakpoints to remove breakpoints from the parent.
7992 2009-01-26 Pedro Alves <pedro@codesourcery.com>
7994 PR backtrace/9458, PR backtrace/8864:
7995 * frame.c (create_new_frame): Update the frame's cached PC before
7996 finding its unwinder. Use frame_id_build to build the new frame's
7998 * stack.c (parse_frame_specification_1): Correct setting ``addrs''
7999 array values from the ``args'' array values.
8001 2009-01-26 Pedro Alves <pedro@codesourcery.com>
8003 * gdbtypes.c (alloc_type, alloc_type_instance, create_range_type)
8004 (create_array_type, create_set_type, init_flags_type)
8005 (copy_type_recursive): Replace pairs of calls to XALLOC and memset
8006 with a call to XZALLOC or XCALLOC, and pairs of calls to
8007 obstack_alloc and memset with a call to OBSTACK_ZALLOC.
8009 2009-01-26 Pedro Alves <pedro@codesourcery.com>
8011 Add "maint set|show internal-error|internal-warning quit|corefile
8012 ask|yes|no" commands.
8015 * utils.c (internal_problem_ask, internal_problem_yes)
8016 (internal_problem_no, internal_problem_modes): New.
8017 (struct internal_problem): Remove FIXME. Make should_quit and
8018 should_dump_core types to char *.
8019 (internal_vproblem, internal_error_problem)
8020 (internal_warning_problem): Adjust.
8021 (set_internal_problem_cmd, show_internal_problem_cmd): New dummy
8023 (add_internal_problem_command): New.
8024 (_initialize_utils): New.
8026 2009-01-25 Pedro Alves <pedro@codesourcery.com>
8028 * infcmd.c (program_info): Use paddress instead of casting stop_pc
8031 2009-01-24 Pedro Alves <pedro@codesourcery.com>
8033 * infrun.c (normal_stop): Don't call
8034 deprecated_update_frame_pc_hack.
8035 * frame.c (deprecated_update_frame_pc_hack)
8036 (deprecated_update_frame_base_hack): Delete, and ...
8037 (create_new_frame): ... inline here.
8038 * frame.h (deprecated_update_frame_pc_hack)
8039 (deprecated_update_frame_base_hack): Delete declarations.
8041 2009-01-23 Pedro Alves <pedro@codesourcery.com>
8043 * cli/cli-decode.c (add_setshow_zuinteger_cmd): New.
8044 * cli/cli-setshow.c (do_setshow_command): Handle it.
8045 * command.h (enum var_types): Add var_zuinteger.
8046 (add_setshow_zuinteger_cmd): Declare.
8048 * valprint.c (_initialize_valprint): Change the set input-radix
8049 and set output-radix commands to zuinteger type.
8051 2009-01-23 Pedro Alves <pedro@codesourcery.com>
8054 * infrun.c (normal_stop): Tag threads as stopped, and run the
8055 hook-stop before printing the stack frame.
8057 2009-01-22 Pedro Alves <pedro@codesourcery.com>
8060 * gnu-v3-abi.c (gnuv3_baseclass_offset): Call check_typedef on
8063 2009-01-20 Kazu Hirata <kazu@codesourcery.com>
8065 * gdb/procfs.c (info_mappings_callback): Cast map->pr_size to
8068 2009-01-20 Daniel Jacobowitz <dan@codesourcery.com>
8071 * infcmd.c (signal_command): Do not specify a resume PC.
8073 2009-01-19 Doug Evans <dje@google.com>
8075 * dummy-frame.c (dummy_frame): Replace regcache member with
8077 (dummy_frame_push): Replace caller_regcache arg with caller_state.
8078 All callers updated.
8079 (remove_dummy_frame,pop_dummy_frame,lookup_dummy_frame): New fns.
8080 (dummy_frame_pop): Rewrite. Verify requested frame is in the
8081 dummy frame stack. Restore program state.
8082 (cleanup_dummy_frames): Rewrite.
8083 (dummy_frame_sniffer): Update. Make static.
8084 * dummy-frame.h (regcache,frame_info): Delete forward decls.
8085 (inferior_thread_state): New forward decl.
8086 (dummy_frame_push): Update prototype.
8087 * frame.c (frame_pop): dummy_frame_pop now does all the work for
8089 * infcall.c (breakpoint_auto_delete_contents): Delete.
8090 (get_function_name,run_inferior_call): New fns.
8091 (call_function_by_hand): Simplify by moving some code to
8092 get_function_name, run_inferior_call. Inferior function call wrapped
8093 in TRY_CATCH so there's less need for cleanups and all exits from
8094 proceed are handled similarily. Detect program exit.
8095 Detect program stopping in a different thread.
8096 Make error messages more consistent.
8097 * inferior.h (inferior_thread_state): Declare (opaque type).
8098 (save_inferior_thread_state,restore_inferior_thread_state,
8099 make_cleanup_restore_inferior_thread_state,
8100 discard_inferior_thread_state, get_inferior_thread_state_regcache):
8102 (save_inferior_status): Update prototype.
8103 * infrun.c: (normal_stop): When stopped for the completion of an
8104 inferior function call, verify the expected stack frame kind.
8105 (inferior_thread_state): New struct.
8106 (save_inferior_thread_state,restore_inferior_thread_state,
8107 do_restore_inferior_thread_state_cleanup,
8108 make_cleanup_restore_inferior_thread_state,
8109 discard_inferior_thread_state,
8110 get_inferior_thread_state_regcache): New functions.
8111 (inferior_status): Move stop_signal, stop_pc, registers to
8112 inferior_thread_state. Remove restore_stack_info.
8113 (save_inferior_status): Remove arg restore_stack_info.
8114 All callers updated. Remove saving of state now saved by
8115 save_inferior_thread_state.
8116 (restore_inferior_status): Remove restoration of state now done by
8117 restore_inferior_thread_state.
8118 (discard_inferior_status): Remove freeing of registers, now done by
8119 discard_inferior_thread_state.
8121 2009-01-18 Pedro Alves <pedro@codesourcery.com>
8123 * tui/tui-disasm.c (tui_vertical_disassem_scroll): Scroll one line
8124 at a time, times NUM_TO_SCROLL.
8125 * tui/tui-winsource.c (tui_horizontal_source_scroll): Don't try to
8126 fetch the selected frame if there is no stack.
8128 2009-01-18 Pedro Alves <pedro@codesourcery.com>
8131 * gdbthread.h (finish_thread_state, finish_thread_state_cleanup):
8133 * thread.c (finish_thread_state, finish_thread_state_cleanup): New.
8134 * infrun.c (wait_for_inferior, fetch_inferior_event): If an error
8135 is thrown while handling an event, finish the thread state.
8136 (normal_stop): Use finish_thread_state cleanup.
8137 * infcmd.c (run_command_1): If an error is thrown while starting
8138 the inferior, finish the thread state.
8140 2009-01-18 Pedro Alves <pedro@codesourcery.com>
8142 * tui/tui-winsource.c (tui_update_breakpoint_info): In asm layout,
8143 skip breakpoints without a location (pending breakpoints).
8145 2009-01-18 Pedro Alves <pedro@codesourcery.com>
8148 * hppa-hpux-tdep.c (hppa_hpux_write_pc): Remove 'return'.
8150 2009-01-18 Nick Roberts <nickrob@snap.net.nz>
8152 * thread.c (thread_command): Move call to annotate_thread_changed
8154 (do_captured_thread_select): ... here, to avoid printing an
8155 annotation if the thread change generates an exception.
8157 2009-01-16 Joel Brobecker <brobecker@adacore.com>
8159 * NEWS: Document x86_64/MinGW as a new native configuration.
8161 2009-01-16 Joel Brobecker <brobecker@adacore.com>
8163 * NEWS: Move the documentation of "info os processes" to
8164 the appropriate section (documenting the new commands).
8166 2009-01-15 Doug Evans <dje@google.com>
8168 * target.h (target_signal_to_string): Make return type const char *.
8169 (target_signal_to_name): Ditto.
8170 (target_signal_from_name): Make arg const char *.
8171 * infrun.c (sig_print_info): Update.
8172 * signals/signals.c (signals): Make array and struct members const.
8173 (target_signal_to_string): Make return type const char *.
8174 (target_signal_to_name): Ditto.
8175 (target_signal_from_name): Make arg const char *.
8177 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
8178 Tristan Gingold <gingold@adacore.com>
8180 * solist.h (struct target_so_ops): New member bfd_open.
8181 (solib_find): Add prototype.
8182 (solib_bfd_fopen): Add prototype.
8183 * solib.c (solib_find, solib_bfd_fopen): New functions, extracted
8184 from solib_bfd_open.
8185 (solib_bfd_open): Use ops->bfd_open override if present. Call
8186 solib_find and solib_bfd_open otherwise.
8188 * objfiles.h (OBJF_KEEPBFD): New define.
8189 * objfiles.c (free_objfile): Do not close BFD if OBJF_KEEPBFD
8190 objfile flag is set.
8191 * solib.c (symbol_add_stub): Do not allocate second BFD for
8192 shared library; use OBJF_KEEPBFD flag on solib objfile.
8194 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
8196 * frame.c (get_frame_arch): Abort if called with NULL this_frame.
8198 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
8200 * value.h (address_of_variable): Add prototype.
8201 (locate_var_value): Remove prototype.
8203 * findvar.c (read_var_value): Do not attempt to default frame
8205 (locate_var_value): Remove function.
8206 * valops.c (value_of_variable): Retrieve selected frame for
8207 symbols that require a frame when called with NULL block.
8208 * valops.c (address_of_variable): New function.
8210 * eval.c (evaluate_subexp_for_address): Call address_of_variable
8211 instead of calling locate_var_value.
8212 (evaluate_subexp_with_coercion): Likewise.
8214 2009-01-14 Daniel Jacobowitz <dan@codesourcery.com>
8216 * NEWS: Document "define" for prefixed commands.
8217 * cli/cli-cmds.c (show_user): Update calls to show_user_1. Call
8218 show_user_1 for prefix commands.
8219 * cli/cli-decode.c (help_cmd_list): Recurse for "help user-defined".
8220 * cli/cli-script.c (validate_comname): Rewrite to handle prefix
8221 commands. Return the containing command list.
8222 (define_command, document_command): Update to handle prefix commands.
8223 (show_user_1): Add prefix and name arguments. Handle prefix
8225 * cli/cli-script.h (show_user_1): Update prototype.
8227 2009-01-14 Kai Tietz <kai.tietz@onevision.com>
8229 * ser-mingw.c (console_select_thread): Add return to make
8231 (pipe_select_thread): Likewise.
8232 (file_select_thread): Likewise.
8234 2009-01-14 Pedro Alves <pedro@codesourcery.com>
8236 * mi/mi-main.c (mi_cmd_execute): Clean up parenthesis mess from
8239 2009-01-14 Pedro Alves <pedro@codesourcery.com>
8241 * remote.c (extended_remote_mourn_1): Invalidate our notion of
8242 current general thread.
8244 2009-01-14 Pedro Alves <pedro@codesourcery.com>
8246 * mi/mi-main.c (mi_cmd_execute): Also allow -list-thread-groups
8247 without a live selected thread.
8249 2009-01-14 Joel Brobecker <brobecker@adacore.com>
8251 Update the copyright notice of some of the files I missed
8252 in the previous copyright update.
8254 2009-01-14 Joel Brobecker <brobecker@adacore.com>
8256 * windows-nat.c (handle_unload_dll): Use %p to print the DLL
8257 base address instead of casting it to DWORD.
8259 2009-01-13 Ulrich Weigand <uweigand@de.ibm.com>
8261 * dwarf2loc.c (dwarf2_evaluate_loc_desc): Do not call get_frame_arch
8262 for NULL frame pointers.
8264 2009-01-13 Mark Kettenis <kettenis@gnu.org>
8266 * utils.c (host_address_to_string): Reimplement in a way that
8267 avoids the cast of the address to long.
8269 2009-01-13 Joel Brobecker <brobecker@adacore.com>
8271 * mdebugread.c (parse_symbol): Save the symbol private data
8272 using SYMBOL_VALUE_BYTES instead of SYMBOL_VALUE.
8273 (psymtab_to_symtab_1): Likewise.
8274 (parse_procedure): Declare variable "e" only in the scope
8275 where it is used. Extract the symbol private data using
8278 2009-01-13 Jim Blandy <jimb@codesourcery.com>
8280 Abstract out common code for copying value locations.
8282 * value.h (set_value_component_location): New declaration.
8283 * value.c (set_value_component_location): New function.
8284 (value_primitive_field): Use it.
8285 * valarith.c (value_subscript, value_subscripted_rvalue): Same.
8286 * valops.c (search_struct_field, value_slice): Same.
8287 * ada-lang.c (coerce_unspec_val_to_type)
8288 (ada_value_primitive_packed_val): Same.
8290 2009-01-13 Joel Brobecker <brobecker@adacore.com>
8292 * MAINTAINERS (GLOBAL MAINTAINERS): Add Tom Tromey.
8294 2009-01-12 Christopher Faylor <me+cygwin@cgf.cx>
8296 * amd64-windows-nat.c Rename gdb-specific win32_* to windows_*
8298 * i386-cygwin-tdep.c: Ditto.
8299 * i386-windows-nat.c: Ditto.
8300 * windows-nat.h: Ditto.
8301 * windows-tdep.c: Ditto.
8302 * windows-tdep.h: Ditto.
8303 * windows-nat.c: Ditto.
8304 (cygwin_load_start): Redefine as CORE_ADDR.
8305 (cygwin_load_end): Ditto.
8306 (windows_make_so): Coerce result of address arithmetic to uintptr_t
8307 before coercing to CORE_ADDR to avoid a compiler warning.
8308 (handle_exception): Define addr as CORE_ADDR and coerce
8309 ExceptionAddress to uintptr_t before assigining to avoid a compiler
8311 * config/djgpp/fnchange.lst: Add mappings for recently renamed windows
8314 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
8316 Fix linking with --enable-targets=all:
8317 * Makefile.in (ALL_TARGET_OBS): Add windows-tdep.o.
8318 (HFILES_NO_SRCDIR): Add windows-tdep.h.
8319 (ALLDEPFILES): Add windows-tdep.c.
8321 2009-01-11 Chris Faylor <me.gdb@cgf.cx>
8323 * win32-nat.h: Delete.
8324 * windows-nat.h: Rename from win32-nat.h.
8325 * win32-nat.c: Delete.
8326 * windows-nat.c: Rename from win32-nat.c.
8327 * win32-termcap.c: Delete.
8328 * windows-termcap.c: Rename from win32-termcap.c.
8329 * amd64-windows-nat.c: Handle rename from win32-nat.h -> windows-nat.h.
8330 * configure.ac: Handle rename from win32-termcap.c ->
8332 * configure: Regenerate.
8333 * gdb_curses.h: Change comment to reflect rename from win32-termcap.c
8334 -> windows-termcap.c.
8335 * i386-cygwin-tdep.c: Handle rename from win32-tdep.h ->
8337 * i386-windows-nat.c: Refect rename from win32-nat.h -> windows-nat.h.
8338 * windows-nat.c: Ditto. Also reflect rename from from win32-tdep.h ->
8340 (win32_make_so): Handle cygwin compiler warning due to change of
8341 load_addr from DWORD to LPVOID.
8342 (handle_load_dll): Use %p in format string to properly print address
8343 and avoid a compiler warning.
8344 (DEBUG_EXCEPTION_SIMPLE): Ditto.
8345 (handle_exception): Ditto.
8346 * windows-tdep.c: Handle rename from win32-tdep.h -> windows-tdep.h.
8347 * config/i386/cygwin.mh: Handle rename from win32-nat.o ->
8349 * config/i386/mingw.mh: Ditto.
8350 * config/i386/mingw64.mh: Ditto.
8352 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
8354 * f-typeprint.c (f_type_print_varspec_suffix): Convert the autovariable
8355 arrayprint_recurse_level to a parameter. Update all the callers. New
8356 comment at autovariables.
8358 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
8360 * gdbtypes.c (make_qualified_type, replace_type): Reformat to the GNU
8363 2009-01-11 Joel Brobecker <brobecker@adacore.com>
8365 * target.c (target_xfer_partial): Use host_address_to_string to
8366 print the address of readbuf and writebuf. Cast the address of
8367 elements inside the myaddr buffer into intptr_t.
8368 (deprecated_debug_xfer_memory): Use paddress to print memaddr.
8369 Cast the address of elements inside the myaddr buffer into
8372 2009-01-11 Joel Brobecker <brobecker@adacore.com>
8374 * amd64-windows-nat.c, amd64-windows-tdep.c: New files.
8375 * config/i386/mingw64.mh, config/i386/nm-cygwin64.h: New files.
8376 * configure.host, configure.tgt: Add handling for x86_64/windows.
8377 * config/djgpp/fnchange.lst: Add entries for amd64-windows-nat.c
8378 and amd64-windows-tdep.c.
8380 2009-01-11 Joel Brobecker <brobecker@adacore.com>
8382 * win32-tdep.h, win32-tdep.c: New files.
8383 * i386-cygwin-tdep.h: Delete.
8384 * i386-cygwin-tdep.c: Include win32-tdep.h instead of
8386 (win32_xfer_shared_library): Delete. Moved to win32-tdep.c.
8387 * win32-nat.c: Likewise.
8388 * configure.tgt: Add win32-tdep.o to the list of target object
8389 files for i386-cygwin and i386-mingw targets.
8391 2009-01-11 Joel Brobecker <brobecker@adacore.com>
8393 * win32-nat.h: New file.
8394 * win32-nat.c (mappings): Initialize to NULL.
8395 (win32_set_context_register_offsets): New function.
8396 * i386-windows-nat.c: New file.
8397 (mappings): Moved here from win32-nat.c.
8398 (_initialize_i386_windows_nat): New function.
8399 * config/i386/mingw.mh (NATDEPFILES): Add i386-windows-nat.o.
8400 * config/i386/cygwin.mh (NATDEPFILES): Likewise.
8402 2009-01-09 Andreas Schwab <schwab@suse.de>
8404 * Makefile.in (init.c): Set LANG/LC_ALL to C, not c.
8406 2009-01-09 Daniel Jacobowitz <dan@codesourcery.com>
8408 * gdbtypes.c (append_composite_type_field): Correct the location of
8411 2009-01-09 Pedro Alves <pedro@codesourcery.com>
8413 * defs.h (deprecated_error_hook): Delete declaration.
8414 * interps.c (clear_interpreter_hooks): Adjust.
8415 * remote-sim.c (gdb_os_error): Don't try to call
8416 deprecated_error_hook. No need to call exit anymore.
8417 * top.c (deprecated_error_hook): Delete.
8419 2009-01-09 Joel Brobecker <brobecker@adacore.com>
8421 * arch-utils.c (gdbarch_update_p): Use host_address_to_string
8422 to print the address of the gdbarch pointer.
8424 2009-01-09 Joel Brobecker <brobecker@adacore.com>
8426 * gdbarch.sh: Fix all the compilation errors on amd64-windows
8427 due to casting a pointer to a long when printing a function
8428 address. Instead, use host_address_to_string to convert our
8429 address to a string.
8430 * gdbarch.c: Regenerate.
8432 2009-01-09 Joel Brobecker <brobecker@adacore.com>
8434 * event-top.c (async_disconnect, async_stop_sig): use "raise"
8435 instead of "kill" to raise a signal.
8437 2009-01-09 Joel Brobecker <brobecker@adacore.com>
8439 * win32-nat.c (get_module_name): Change the type of parameter
8440 "base_address" to LPVOID. Remove unnecessary cast.
8441 (struct lm_info): Change type of load_addr to LPVOID.
8442 (win32_make_so): Change the type of parameter "load_addr"
8443 to LPVOID. Remove some unnecessary casts.
8444 (handle_unload_dll): Change the type of "lpBaseOfDll" to LPVOID.
8445 (win32_xfer_shared_libraries): Add missing cast.
8447 2009-01-09 Joel Brobecker <brobecker@adacore.com>
8449 * win32-nat.c (has_detach_ability, set_process_privilege):
8450 Cast the result of GetProcAddress to (void *) to avoid
8451 a compilation warning.
8453 2009-01-09 Joel Brobecker <brobecker@adacore.com>
8455 * win32-nat.c (CONTEXT_EXTENDED_REGISTERS): Define to 0 if not
8458 2009-01-09 Joel Brobecker <brobecker@adacore.com>
8460 * win32-nat.c (get_image_name, win32_xfer_memory): Fix type
8461 definition of local variable "done".
8462 (info_w32_command, handle_exception): Remove unnecessary cast.
8464 2009-01-09 Joel Brobecker <brobecker@adacore.com>
8466 * win32-nat.c (kernel32_DebugSetProcessKillOnExit): Renames
8467 DebugSetProcessKillOnExit. Update all uses in this file.
8468 (kernel32_DebugActiveProcessStop): Renames DebugActiveProcessStop.
8469 Update all uses in this file.
8471 2009-01-09 Joel Brobecker <brobecker@adacore.com>
8473 * win32-nat.c (do_initial_win32_stuff): Add new ops parameter,
8474 and use it when pushing the target.
8475 (win32_attach, win32_create_inferior): Update call to
8476 do_initial_win32_stuff.
8477 (win32_detach, win32_mourn_inferior): Use our ops parameter
8478 instead of the global win32_ops to unpush the target.
8480 2009-01-09 Joel Brobecker <brobecker@adacore.com>
8482 * ser-mingw.c (ser_windows_open): Use proper type when casting
8483 in call to _open_osfhandle.
8485 2009-01-09 Kai Tietz <kai.tietz@onevision.com>
8487 * coff-pe-read.c (read_pe_exported_syms): Fix typo.
8489 2009-01-09 Joel Brobecker <brobecker@adacore.com>
8491 * CONTRIBUTE: Minor reformatting.
8493 2009-01-08 Kai Tietz <kai.tietz@onevision.com>
8495 * MAINTAINERS: Add myself to Write After Approval.
8496 * coff-pe-read.c (read_pe_exported_syms): Enable read of PE+
8499 2009-01-08 Nathan Froyd <froydnj@codesourcery.com>
8501 * remote-sim.c (gdb_os_error): Mark as a noreturn function.
8502 Call exit to make it obvious to GCC.
8504 2009-01-08 Tom Tromey <tromey@redhat.com>
8506 PR breakpoints/9350:
8507 * varobj.c (varobj_invalidate): Unconditionally free
8509 * symfile.c (syms_from_objfile): Free local_addr when returning
8511 * exec.c (exec_file_attach): Do cleanups before returning.
8512 (exec_file_command): Likewise.
8513 * corefile.c (reopen_exec_file): Do cleanups before returning.
8514 * breakpoint.c (insert_breakpoint_locations): Do cleanups before
8516 (do_vec_free): New function.
8517 (update_global_location_list): Make a cleanup for old_locations.
8518 Do cleanups before returning. Remove unused variable 'e'.
8519 (find_condition_and_thread): Free result of parsing the
8521 (print_it_typical): Do cleanups before returning.
8522 (breakpoint_re_set_one): Always free sals.sals.
8524 2009-01-08 Joel Brobecker <brobecker@adacore.com>
8525 Emi Suzuki <emi-suzuki@tjsys.co.jp>
8527 * breakpoint.c (do_enable_breakpoint): Use update_watchpoint for
8530 2009-01-07 Doug Evans <dje@google.com>
8532 * top.c (gdb_prompt_string): Delete, unused.
8534 2009-01-07 Pedro Alves <pedro@codesourcery.com>
8536 Delete ONE_PROCESS_WRITETEXT leftovers.
8538 * breakpoint.c (insert_bp_location): Delete process_warning
8540 (insert_breakpoint_locations): Adjust.
8541 (reattach_breakpoints): Adjust.
8542 * infrun.c (normal_stop): Drop "It might be running in another
8545 2009-01-07 Stan Shebs <stan@codesourcery.com>
8547 * config/pa/linux.mh (XDEPFILES): Remove.
8549 2009-01-07 Doug Evans <dje@google.com>
8551 * cli/cli-cmds.c (set_debug): Fix cut-n-paste error.
8553 2009-01-07 Jan Kratochvil <jan.kratochvil@redhat.com>
8555 * f-typeprint.c (f_type_print_base <TYPE_CODE_STRUCT>): Fix output
8556 spacing, a regression from 2008-04-22.
8558 2009-01-07 Joel Brobecker <brobecker@adacore.com>
8560 * utils.c (gdb_print_host_address): Adjust implementation to
8561 reuse host_address_to_string. Move comment explaining the conversion
8562 from host address to string from here...
8563 (host_address_to_string): ... to there.
8565 2009-01-07 Emi Suzuki <emi-suzuki@tjsys.co.jp>
8567 * MAINTAINERS: Add myself for write after approval privileges.
8569 2009-01-06 Tom Tromey <tromey@redhat.com>
8571 * value.c (set_internalvar): Use value_free, not xfree.
8573 2009-01-06 Jim Blandy <jimb@red-bean.com>
8575 Check return values of functions declared with warn_unused_result
8576 attribute in GLIBC 2.8.
8577 * cli/cli-cmds.c (pwd_command): Check return value from getcwd.
8578 * inflow.c (check_syscall): New function.
8579 (new_tty): Use check_syscall to check return values from open and dup.
8580 * linux-nat.c (linux_nat_info_proc_cmd): Check return value from fgets.
8581 * main.c (captured_main): Call cwd after setting up gdb_stderr;
8582 check for errors from getcwd.
8583 * mi/mi-cmd-env.c (mi_cmd_env_pwd): Check return value from getcwd.
8584 * ui-file.c (stdio_file_write): Ignore return value from fwrite.
8585 (stdio_file_fputs): Same.
8586 * utils.c (internal_vproblem): abort if last-ditch error message
8589 * top.c (gdb_init): Don't set the current directory here; that's
8590 already been done in captured_main.
8592 2009-01-06 Sandra Loosemore <sandra@codesourcery.com>
8594 * ser-tcp.c: Adjust includes.
8595 (tcp_set_cmdlist, tcp_show_cmdlist): Declare.
8596 (tcp_auto_retry, tcp_retry_limit): Declare.
8597 (TIMEOUT): Remove, in favor of tcp_retry_limit.
8598 (POLL_INTERVAL): Increase to 5, in favor of backoff logic.
8599 (wait_for_connect): New function.
8600 (net_open): Use it. Add auto-retry logic.
8601 (set_tcp_cmd, show_tcp_cmd): New functions.
8602 (_initialize_ser_tcp): Initialize new "set/show tcp auto-retry"
8603 and "set/show tcp connect-timeout" commands.
8604 * NEWS: Document new commands.
8606 2009-01-05 Tom Tromey <tromey@redhat.com>
8608 * python/python-internal.h (Py_ssize_t): Define as int.
8610 2009-01-05 Jim Blandy <jimb@red-bean.com>
8612 * MAINTAINERS: Fix my e-mail address as steering committee member.
8614 2009-01-03 Joel Brobecker <brobecker@adacore.com>
8616 Updated copyright notices for most files.
8618 2009-01-03 Joel Brobecker <brobecker@adacore.com>
8620 * top.c (print_gdb_version): Update copyright year.
8622 2009-01-03 Joel Brobecker <brobecker@adacore.com>
8624 * config/djgpp/fnchange.lst: Add entry for ChangeLog-2008.
8626 2009-01-01 Pedro Alves <pedro@codesourcery.com>
8628 PR breakpoints/9681:
8629 * exceptions.h (enum errors): New error type, MEMORY_ERROR.
8630 * corefile.c (memory_error): Rewrite to throw a MEMORY_ERROR.
8631 * breakpoint.c (fetch_watchpoint_value): Ignore MEMORY_ERRORs, but
8632 retrow all other exceptions.
8634 For older changes see ChangeLog-2008.
8640 version-control: never