1 2015-08-08 Ulrich Weigand <uweigand@de.ibm.com>
3 * spu-multiarch.c (parse_spufs_run): Bail out if inferior is not
4 registered yet. Set inferior_ptid while calling target_read_memory.
6 2015-08-08 Ulrich Weigand <uweigand@de.ibm.com>
8 * nat/linux-ptrace.h (GDB_ARCH_TRAP_BRKPT): Replace by ...
9 (GDB_ARCH_IS_TRAP_BRKPT): ... this. Add __powerpc__ case.
10 * linux-nat.c (check_stopped_by_breakpoint): Use
11 GDB_ARCH_IS_TRAP_BRKPT instead of GDB_ARCH_TRAP_BRKPT.
13 2015-08-08 Ulrich Weigand <uweigand@de.ibm.com>
15 * linux-thread-db.c (thread_db_get_thread_local_address): If the
16 thread was not yet discovered, use thread_from_lwp instead of
17 calling thread_db_find_new_threads_1.
19 2015-08-27 Simon Marchi <simon.marchi@ericsson.com>
21 * m88k-tdep.c (m88k_analyze_prologue): Fix inverted allocation
24 2015-08-27 Simon Marchi <simon.marchi@ericsson.com>
26 * NEWS: Document support for non-8-bits addressable memory.
28 2015-08-27 Pedro Alves <palves@redhat.com>
30 * configure.ac: Remove AC_TYPE_SIGNAL call.
31 * configure, config.in: Regenerate.
33 2015-08-27 Pedro Alves <palves@redhat.com>
35 * cp-support.c (gdb_demangle): Use sighandler_t. Remove cast.
36 * extension-priv.h: Include signal.h.
37 (struct signal_handler) <handler>: Change type to sighandler_t.
38 * extension.c (install_gdb_sigint_handler): Use sighandler_t.
39 * inflow.c (sigint_ours, sigquit_ours): Change type to
41 (child_terminal_inferior): Remove casts.
42 (child_terminal_ours_1, new_tty): Use sighandler_t. Remove casts.
43 (osig): Change type to sighandler_t.
44 * nto-procfs.c (ofunc): Change type to sighandler_t.
45 (procfs_wait): Remove casts.
46 * remote-m32r-sdi.c (m32r_wait, m32r_load): Use sighandler_t.
47 * remote-sim.c (gdbsim_wait): Use sighandler_t.
48 * utils.c (wait_to_die_with_timeout): Use sighandler_t.
50 2015-08-27 Pedro Alves <palves@redhat.com>
52 * gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add signal-h.
53 * gnulib/aclocal.m4: Renegerate.
54 * gnulib/config.in: Renegerate.
55 * gnulib/configure: Renegerate.
56 * gnulib/import/Makefile.am: Update.
57 * gnulib/import/Makefile.in: Regenerate.
58 * gnulib/import/m4/gnulib-cache.m4: Update.
59 * gnulib/import/m4/gnulib-comp.m4: Update.
60 * gnulib/import/m4/signal_h.m4: New file.
61 * gnulib/import/signal.in.h: New file.
63 2015-08-27 Pedro Alves <palves@redhat.com>
65 * remote.c (DEFAULT_MAX_MEMORY_PACKET_SIZE)
66 (MIN_MEMORY_PACKET_SIZE): New.
67 (MAX_REMOTE_PACKET_SIZE, MIN_REMOTE_PACKET_SIZE): Delete.
68 (get_memory_packet_size): Adjust. No longer limit the max packet
70 (set_memory_packet_size): Adjust, and remove dead code.
71 (remote_check_symbols): Use xmalloc and a cleanup instead of
73 (remote_packet_size): No longer cap the packet size.
74 (putpkt_binary): Use xmalloc and a cleanup instead of alloca.
76 2015-08-26 Luis Machado <lgustavo@codesourcery.com>
78 * compile/compile.c (compile_to_object): Mention language in
81 2015-08-26 Patrick Palka <patrick@parcs.ath.cx>
83 * target.c (target_pre_inferior): Unset attach_flag.
85 2015-08-26 Simon Marchi <simon.marchi@ericsson.com>
87 * gdbarch.sh (append_name): Fix type in XRESIZEVEC.
88 * gdbarch.c: Re-generate.
90 2015-08-26 Simon Marchi <simon.marchi@ericsson.com>
92 * aarch64-linux-nat.c (aarch64_add_process): Likewise.
93 * aarch64-tdep.c (aarch64_gdbarch_init): Likewise.
94 * ada-exp.y (write_ambiguous_var): Likewise.
95 * ada-lang.c (resolve_subexp): Likewise.
96 (user_select_syms): Likewise.
97 (assign_aggregate): Likewise.
98 (ada_evaluate_subexp): Likewise.
99 (cache_symbol): Likewise.
100 * addrmap.c (allocate_key): Likewise.
101 (addrmap_create_mutable): Likewise.
102 * aix-thread.c (sync_threadlists): Likewise.
103 * alpha-tdep.c (alpha_push_dummy_call): Likewise.
104 (alpha_gdbarch_init): Likewise.
105 * amd64-windows-tdep.c (amd64_windows_push_arguments): Likewise.
106 * arm-linux-nat.c (arm_linux_add_process): Likewise.
107 * arm-linux-tdep.c (arm_linux_displaced_step_copy_insn): Likewise.
108 * arm-tdep.c (push_stack_item): Likewise.
109 (arm_displaced_step_copy_insn): Likewise.
110 (arm_gdbarch_init): Likewise.
111 (_initialize_arm_tdep): Likewise.
112 * avr-tdep.c (push_stack_item): Likewise.
113 * ax-general.c (new_agent_expr): Likewise.
114 * block.c (block_initialize_namespace): Likewise.
115 * breakpoint.c (alloc_counted_command_line): Likewise.
116 (update_dprintf_command_list): Likewise.
117 (parse_breakpoint_sals): Likewise.
118 (decode_static_tracepoint_spec): Likewise.
119 (until_break_command): Likewise.
120 (clear_command): Likewise.
121 (update_global_location_list): Likewise.
122 (get_breakpoint_objfile_data) Likewise.
123 * btrace.c (ftrace_new_function): Likewise.
124 (btrace_set_insn_history): Likewise.
125 (btrace_set_call_history): Likewise.
126 * buildsym.c (add_symbol_to_list): Likewise.
127 (record_pending_block): Likewise.
128 (start_subfile): Likewise.
129 (start_buildsym_compunit): Likewise.
130 (push_subfile): Likewise.
131 (end_symtab_get_static_block): Likewise.
132 (buildsym_init): Likewise.
133 * cli/cli-cmds.c (source_command): Likewise.
134 * cli/cli-decode.c (add_cmd): Likewise.
135 * cli/cli-script.c (build_command_line): Likewise.
136 (setup_user_args): Likewise.
137 (realloc_body_list): Likewise.
138 (process_next_line): Likewise.
139 (copy_command_lines): Likewise.
140 * cli/cli-setshow.c (do_set_command): Likewise.
141 * coff-pe-read.c (read_pe_exported_syms): Likewise.
142 * coffread.c (coff_locate_sections): Likewise.
143 (coff_symtab_read): Likewise.
144 (coff_read_struct_type): Likewise.
145 * common/cleanups.c (make_my_cleanup2): Likewise.
146 * common/common-exceptions.c (throw_it): Likewise.
147 * common/filestuff.c (make_cleanup_close): Likewise.
148 * common/format.c (parse_format_string): Likewise.
149 * common/queue.h (DEFINE_QUEUE_P): Likewise.
150 * compile/compile-object-load.c (munmap_list_add): Likewise.
151 (compile_object_load): Likewise.
152 * compile/compile-object-run.c (compile_object_run): Likewise.
153 * compile/compile.c (append_args): Likewise.
154 * corefile.c (specify_exec_file_hook): Likewise.
155 * cp-support.c (make_symbol_overload_list): Likewise.
156 * cris-tdep.c (push_stack_item): Likewise.
157 (cris_gdbarch_init): Likewise.
158 * ctf.c (ctf_trace_file_writer_new): Likewise.
159 * dbxread.c (init_header_files): Likewise.
160 (add_new_header_file): Likewise.
161 (init_bincl_list): Likewise.
162 (dbx_end_psymtab): Likewise.
163 (start_psymtab): Likewise.
164 (dbx_end_psymtab): Likewise.
165 * dcache.c (dcache_init): Likewise.
166 * dictionary.c (dict_create_hashed): Likewise.
167 (dict_create_hashed_expandable): Likewise.
168 (dict_create_linear): Likewise.
169 (dict_create_linear_expandable): Likewise.
170 * dtrace-probe.c (dtrace_process_dof_probe): Likewise.
171 * dummy-frame.c (register_dummy_frame_dtor): Likewise.
172 * dwarf2-frame-tailcall.c (cache_new_ref1): Likewise.
173 * dwarf2-frame.c (dwarf2_build_frame_info): Likewise.
174 (decode_frame_entry_1): Likewise.
175 * dwarf2expr.c (new_dwarf_expr_context): Likewise.
176 * dwarf2loc.c (dwarf2_compile_expr_to_ax): Likewise.
177 * dwarf2read.c (dwarf2_has_info): Likewise.
178 (create_signatured_type_table_from_index): Likewise.
179 (dwarf2_read_index): Likewise.
180 (dw2_get_file_names_reader): Likewise.
181 (create_all_type_units): Likewise.
182 (read_cutu_die_from_dwo): Likewise.
183 (init_tu_and_read_dwo_dies): Likewise.
184 (init_cutu_and_read_dies): Likewise.
185 (create_all_comp_units): Likewise.
186 (queue_comp_unit): Likewise.
187 (inherit_abstract_dies): Likewise.
188 (read_call_site_scope): Likewise.
189 (dwarf2_add_field): Likewise.
190 (dwarf2_add_typedef): Likewise.
191 (dwarf2_add_member_fn): Likewise.
192 (attr_to_dynamic_prop): Likewise.
193 (abbrev_table_alloc_abbrev): Likewise.
194 (abbrev_table_read_table): Likewise.
195 (add_include_dir): Likewise.
196 (add_file_name): Likewise.
197 (dwarf_decode_line_header): Likewise.
198 (dwarf2_const_value_attr): Likewise.
199 (dwarf_alloc_block): Likewise.
200 (parse_macro_definition): Likewise.
201 (set_die_type): Likewise.
202 (write_psymtabs_to_index): Likewise.
203 (create_cus_from_index): Likewise.
204 (dwarf2_create_include_psymtab): Likewise.
205 (process_psymtab_comp_unit_reader): Likewise.
206 (build_type_psymtab_dependencies): Likewise.
207 (read_comp_units_from_section): Likewise.
208 (compute_compunit_symtab_includes): Likewise.
209 (create_dwo_unit_in_dwp_v1): Likewise.
210 (create_dwo_unit_in_dwp_v2): Likewise.
211 (read_func_scope): Likewise.
212 (process_structure_scope): Likewise.
213 (mark_common_block_symbol_computed): Likewise.
214 (load_partial_dies): Likewise.
215 (dwarf2_symbol_mark_computed): Likewise.
216 * elfread.c (elf_symfile_segments): Likewise.
217 (elf_read_minimal_symbols): Likewise.
218 * environ.c (make_environ): Likewise.
219 * eval.c (evaluate_subexp_standard): Likewise.
220 * event-loop.c (create_file_handler): Likewise.
221 (create_async_signal_handler): Likewise.
222 (create_async_event_handler): Likewise.
223 (create_timer): Likewise.
224 * exec.c (build_section_table): Likewise.
225 * fbsd-nat.c (fbsd_remember_child): Likewise.
226 * fork-child.c (fork_inferior): Likewise.
227 * frv-tdep.c (new_variant): Likewise.
228 * gdbarch.sh (gdbarch_alloc): Likewise.
229 (append_name): Likewise.
230 * gdbtypes.c (rank_function): Likewise.
231 (copy_type_recursive): Likewise.
232 (add_dyn_prop): Likewise.
233 * gnu-nat.c (make_proc): Likewise.
234 (make_inf): Likewise.
235 (gnu_write_inferior): Likewise.
236 * gnu-v3-abi.c (build_gdb_vtable_type): Likewise.
237 (build_std_type_info_type): Likewise.
238 * guile/scm-param.c (compute_enum_list): Likewise.
239 * guile/scm-utils.c (gdbscm_parse_function_args): Likewise.
240 * guile/scm-value.c (gdbscm_value_call): Likewise.
241 * h8300-tdep.c (h8300_gdbarch_init): Likewise.
242 * hppa-tdep.c (hppa_init_objfile_priv_data): Likewise.
243 (read_unwind_info): Likewise.
244 * ia64-tdep.c (ia64_gdbarch_init): Likewise.
245 * infcall.c (dummy_frame_context_saver_setup): Likewise.
246 (call_function_by_hand_dummy): Likewise.
247 * infcmd.c (step_once): Likewise.
248 (finish_forward): Likewise.
249 (attach_command): Likewise.
250 (notice_new_inferior): Likewise.
251 * inferior.c (add_inferior_silent): Likewise.
252 * infrun.c (add_displaced_stepping_state): Likewise.
253 (save_infcall_control_state): Likewise.
254 (save_inferior_ptid): Likewise.
255 (_initialize_infrun): Likewise.
256 * jit.c (bfd_open_from_target_memory): Likewise.
257 (jit_gdbarch_data_init): Likewise.
258 * language.c (add_language): Likewise.
259 * linespec.c (decode_line_2): Likewise.
260 * linux-nat.c (add_to_pid_list): Likewise.
261 (add_initial_lwp): Likewise.
262 * linux-thread-db.c (add_thread_db_info): Likewise.
263 (record_thread): Likewise.
264 (info_auto_load_libthread_db): Likewise.
265 * m32c-tdep.c (m32c_gdbarch_init): Likewise.
266 * m68hc11-tdep.c (m68hc11_gdbarch_init): Likewise.
267 * m68k-tdep.c (m68k_gdbarch_init): Likewise.
268 * m88k-tdep.c (m88k_analyze_prologue): Likewise.
269 * macrocmd.c (macro_define_command): Likewise.
270 * macroexp.c (gather_arguments): Likewise.
271 * macroscope.c (sal_macro_scope): Likewise.
272 * macrotab.c (new_macro_table): Likewise.
273 * mdebugread.c (push_parse_stack): Likewise.
274 (parse_partial_symbols): Likewise.
275 (parse_symbol): Likewise.
276 (psymtab_to_symtab_1): Likewise.
277 (new_block): Likewise.
278 (new_psymtab): Likewise.
279 (mdebug_build_psymtabs): Likewise.
280 (add_pending): Likewise.
281 (elfmdebug_build_psymtabs): Likewise.
282 * mep-tdep.c (mep_gdbarch_init): Likewise.
283 * mi/mi-main.c (mi_execute_command): Likewise.
284 * mi/mi-parse.c (mi_parse_argv): Likewise.
285 * minidebug.c (lzma_open): Likewise.
286 * minsyms.c (terminate_minimal_symbol_table): Likewise.
287 * mips-linux-nat.c (mips_linux_insert_watchpoint): Likewise.
288 * mips-tdep.c (mips_gdbarch_init): Likewise.
289 * mn10300-tdep.c (mn10300_gdbarch_init): Likewise.
290 * msp430-tdep.c (msp430_gdbarch_init): Likewise.
291 * mt-tdep.c (mt_registers_info): Likewise.
292 * nat/aarch64-linux.c (aarch64_linux_new_thread): Likewise.
293 * nat/linux-btrace.c (linux_enable_bts): Likewise.
294 (linux_enable_pt): Likewise.
295 * nat/linux-osdata.c (linux_xfer_osdata_processes): Likewise.
296 (linux_xfer_osdata_processgroups): Likewise.
297 * nios2-tdep.c (nios2_gdbarch_init): Likewise.
298 * nto-procfs.c (procfs_meminfo): Likewise.
299 * objc-lang.c (start_msglist): Likewise.
300 (selectors_info): Likewise.
301 (classes_info): Likewise.
302 (find_methods): Likewise.
303 * objfiles.c (allocate_objfile): Likewise.
304 (update_section_map): Likewise.
305 * osabi.c (gdbarch_register_osabi): Likewise.
306 (gdbarch_register_osabi_sniffer): Likewise.
307 * parse.c (start_arglist): Likewise.
308 * ppc-linux-nat.c (hwdebug_find_thread_points_by_tid): Likewise.
309 (hwdebug_insert_point): Likewise.
310 * printcmd.c (display_command): Likewise.
311 (ui_printf): Likewise.
312 * procfs.c (create_procinfo): Likewise.
313 (load_syscalls): Likewise.
314 (proc_get_LDT_entry): Likewise.
315 (proc_update_threads): Likewise.
316 * prologue-value.c (make_pv_area): Likewise.
317 (pv_area_store): Likewise.
318 * psymtab.c (extend_psymbol_list): Likewise.
319 (init_psymbol_list): Likewise.
320 (allocate_psymtab): Likewise.
321 * python/py-inferior.c (add_thread_object): Likewise.
322 * python/py-param.c (compute_enum_values): Likewise.
323 * python/py-value.c (valpy_call): Likewise.
324 * python/py-varobj.c (py_varobj_iter_next): Likewise.
325 * python/python.c (ensure_python_env): Likewise.
326 * record-btrace.c (record_btrace_start_replaying): Likewise.
327 * record-full.c (record_full_reg_alloc): Likewise.
328 (record_full_mem_alloc): Likewise.
329 (record_full_end_alloc): Likewise.
330 (record_full_core_xfer_partial): Likewise.
331 * regcache.c (get_thread_arch_aspace_regcache): Likewise.
332 * remote-fileio.c (remote_fileio_init_fd_map): Likewise.
333 * remote-notif.c (remote_notif_state_allocate): Likewise.
334 * remote.c (demand_private_info): Likewise.
335 (remote_notif_stop_alloc_reply): Likewise.
336 (remote_enable_btrace): Likewise.
337 * reverse.c (save_bookmark_command): Likewise.
338 * rl78-tdep.c (rl78_gdbarch_init): Likewise.
339 * rx-tdep.c (rx_gdbarch_init): Likewise.
340 * s390-linux-nat.c (s390_insert_watchpoint): Likewise.
341 * ser-go32.c (dos_get_tty_state): Likewise.
342 (dos_copy_tty_state): Likewise.
343 * ser-mingw.c (ser_windows_open): Likewise.
344 (ser_console_wait_handle): Likewise.
345 (ser_console_get_tty_state): Likewise.
346 (make_pipe_state): Likewise.
347 (net_windows_open): Likewise.
348 * ser-unix.c (hardwire_get_tty_state): Likewise.
349 (hardwire_copy_tty_state): Likewise.
350 * solib-aix.c (solib_aix_new_lm_info): Likewise.
351 * solib-dsbt.c (dsbt_current_sos): Likewise.
352 (dsbt_relocate_main_executable): Likewise.
353 * solib-frv.c (frv_current_sos): Likewise.
354 (frv_relocate_main_executable): Likewise.
355 * solib-spu.c (spu_bfd_fopen): Likewise.
356 * solib-svr4.c (lm_info_read): Likewise.
357 (svr4_copy_library_list): Likewise.
358 (svr4_default_sos): Likewise.
359 * source.c (find_source_lines): Likewise.
360 (line_info): Likewise.
361 (add_substitute_path_rule): Likewise.
362 * spu-linux-nat.c (spu_bfd_open): Likewise.
363 * spu-tdep.c (info_spu_dma_cmdlist): Likewise.
364 * stabsread.c (dbx_lookup_type): Likewise.
365 (read_type): Likewise.
366 (read_member_functions): Likewise.
367 (read_struct_fields): Likewise.
368 (read_baseclasses): Likewise.
369 (read_args): Likewise.
370 (_initialize_stabsread): Likewise.
371 * stack.c (func_command): Likewise.
372 * stap-probe.c (handle_stap_probe): Likewise.
373 * symfile.c (addrs_section_sort): Likewise.
374 (addr_info_make_relative): Likewise.
375 (load_section_callback): Likewise.
376 (add_symbol_file_command): Likewise.
377 (init_filename_language_table): Likewise.
378 * symtab.c (create_filename_seen_cache): Likewise.
379 (sort_search_symbols_remove_dups): Likewise.
380 (search_symbols): Likewise.
381 * target.c (make_cleanup_restore_target_terminal): Likewise.
382 * thread.c (new_thread): Likewise.
383 (enable_thread_stack_temporaries): Likewise.
384 (make_cleanup_restore_current_thread): Likewise.
385 (thread_apply_all_command): Likewise.
386 * tic6x-tdep.c (tic6x_gdbarch_init): Likewise.
387 * top.c (gdb_readline_wrapper): Likewise.
388 * tracefile-tfile.c (tfile_trace_file_writer_new): Likewise.
389 * tracepoint.c (trace_find_line_command): Likewise.
390 (all_tracepoint_actions_and_cleanup): Likewise.
391 (make_cleanup_restore_current_traceframe): Likewise.
392 (get_uploaded_tp): Likewise.
393 (get_uploaded_tsv): Likewise.
394 * tui/tui-data.c (tui_alloc_generic_win_info): Likewise.
395 (tui_alloc_win_info): Likewise.
396 (tui_alloc_content): Likewise.
397 (tui_add_content_elements): Likewise.
398 * tui/tui-disasm.c (tui_find_disassembly_address): Likewise.
399 (tui_set_disassem_content): Likewise.
400 * ui-file.c (ui_file_new): Likewise.
401 (stdio_file_new): Likewise.
402 (tee_file_new): Likewise.
403 * utils.c (make_cleanup_restore_integer): Likewise.
404 (add_internal_problem_command): Likewise.
405 * v850-tdep.c (v850_gdbarch_init): Likewise.
406 * valops.c (find_oload_champ): Likewise.
407 * value.c (allocate_value_lazy): Likewise.
408 (record_latest_value): Likewise.
409 (create_internalvar): Likewise.
410 * varobj.c (install_variable): Likewise.
411 (new_variable): Likewise.
412 (new_root_variable): Likewise.
414 (_initialize_varobj): Likewise.
415 * windows-nat.c (windows_make_so): Likewise.
416 * x86-nat.c (x86_add_process): Likewise.
417 * xcoffread.c (arrange_linetable): Likewise.
418 (allocate_include_entry): Likewise.
419 (process_linenos): Likewise.
420 (SYMBOL_DUP): Likewise.
421 (xcoff_start_psymtab): Likewise.
422 (xcoff_end_psymtab): Likewise.
423 * xml-support.c (gdb_xml_parse_attr_ulongest): Likewise.
424 * xtensa-tdep.c (xtensa_register_type): Likewise.
425 * gdbarch.c: Regenerate.
426 * gdbarch.h: Regenerate.
428 2015-08-25 Don Breazeal <donb@codesourcery.com>
430 * infrun.c (follow_exec): Re-order operations for
431 handling follow-exec-mode "new".
432 (handle_inferior_event_1): Assign ecs->event_thread
433 to the current thread.
434 * remote.c (get_remote_arch_state): Add an assertion.
436 2015-08-26 Pedro Alves <palves@redhat.com>
438 * MAINTAINERS: Add Markus Metzger as btrace maintainer.
440 2015-08-25 Pedro Alves <palves@redhat.com>
443 * defs.h (maybe_quit): Declare.
444 (QUIT): Now calls maybe_quit.
445 * event-loop.c (clear_async_signal_handler)
446 (async_signal_handler_is_marked): New functions.
447 * event-loop.h (async_signal_handler_is_marked)
448 (clear_async_signal_handler): New declarations.
449 * remote.c (remote_check_pending_interrupt): New function.
450 (interrupt_query): Use make_cleanup_restore_target_terminal. No
451 longer check whether the target is async. If waiting for a stop
452 reply, and a Ctrl-C as been sent to the target, offer to
453 disconnect, and throw TARGET_CLOSE_ERROR instead of a quit.
454 Otherwise do not disconnect and throw a quit.
455 (_initialize_remote): Install remote_check_pending_interrupt as
456 to_check_pending_interrupt.
457 * target.c (target_check_pending_interrupt): New function.
458 * target.h (struct target_ops) <to_check_pending_interrupt>: New
460 (target_check_pending_interrupt): New declaration.
461 * utils.c (maybe_quit): New function.
462 * target-delegates.c: Regenerate.
464 2015-08-25 Yao Qi <yao.qi@linaro.org>
466 * nat/aarch64-linux-hw-point.c (debug_reg_change_callback):
467 Rename local variable pid to tid, and get lwpid of lwp. Update
470 2015-08-25 Pierre-Marie de Rodat <derodat@adacore.com>
472 * ada-lang.c (ada_read_var_value): Add a var_block argument
473 and pass it to default_read_var_value.
474 * block.c (block_static_link): New accessor.
475 * block.h (block_static_link): Declare it.
476 * buildsym.c (finish_block_internal): Add a static_link
477 argument. If there is a static link, associate it to the new
479 (finish_block): Add a static link argument and pass it to
480 finish_block_internal.
481 (end_symtab_get_static_block): Update calls to finish_block and
482 to finish_block_internal.
483 (end_symtab_with_blockvector): Update call to
484 finish_block_internal.
485 * buildsym.h: Forward-declare struct dynamic_prop.
486 (struct context_stack): Add a static_link field.
487 (finish_block): Add a static link argument.
488 * c-exp.y: Remove an obsolete comment (evaluation of variables
489 already start from the selected frame, and now they climb *up*
490 the call stack) and propagate the block information to the
494 * go-exp.y: Likewise.
495 * jv-exp.y: Likewise.
496 * m2-exp.y: Likewise.
498 * coffread.c (coff_symtab_read): Update calls to finish_block.
499 * dbxread.c (process_one_symbol): Likewise.
500 * xcoffread.c (read_xcoff_symtab): Likewise.
501 * compile/compile-c-symbols.c (convert_one_symbol): Promote the
502 "sym" parameter to struct block_symbol, update its uses and pass
503 its block to calls to read_var_value.
504 (convert_symbol_sym): Update the calls to convert_one_symbol.
505 * compile/compile-loc2c.c (do_compile_dwarf_expr_to_c): Update
506 call to read_var_value.
507 * dwarf2loc.c (block_op_get_frame_base): New.
508 (dwarf2_block_frame_base_locexpr_funcs): Implement the
509 get_frame_base method.
510 (dwarf2_block_frame_base_loclist_funcs): Likewise.
511 (dwarf2locexpr_baton_eval): Add a frame argument and use it
512 instead of the selected frame in order to evaluate the
514 (dwarf2_evaluate_property): Add a frame argument. Update call
515 to dwarf2_locexpr_baton_eval to provide a frame in available and
516 to handle the absence of address stack.
517 * dwarf2loc.h (dwarf2_evaluate_property): Add a frame argument.
518 * dwarf2read.c (attr_to_dynamic_prop): Add a forward
520 (read_func_scope): Record any available static link description.
521 Update call to finish_block.
522 (read_lexical_block_scope): Update call to finish_block.
523 * findvar.c (follow_static_link): New.
524 (get_hosting_frame): New.
525 (default_read_var_value): Add a var_block argument. Use
526 get_hosting_frame to handle non-local references.
527 (read_var_value): Add a var_block argument and pass it to the
528 LA_READ_VAR_VALUE method.
529 * gdbtypes.c (resolve_dynamic_range): Update calls to
530 dwarf2_evaluate_property.
531 (resolve_dynamic_type_internal): Likewise.
532 * guile/scm-frame.c (gdbscm_frame_read_var): Update call to
533 read_var_value, passing it the block coming from symbol lookup.
534 * guile/scm-symbol.c (gdbscm_symbol_value): Update call to
535 read_var_value (TODO).
536 * infcmd.c (finish_command_continuation): Update call to
537 read_var_value, passing it the block coming from symbol lookup.
538 * infrun.c (insert_exception_resume_breakpoint): Likewise.
539 * language.h (struct language_defn): Add a var_block argument to
540 the LA_READ_VAR_VALUE method.
541 * objfiles.c (struct static_link_htab_entry): New.
542 (static_link_htab_entry_hash): New.
543 (static_link_htab_entry_eq): New.
544 (objfile_register_static_link): New.
545 (objfile_lookup_static_link): New.
546 (free_objfile): Free the STATIC_LINKS hashed map if needed.
547 * objfiles.h: Include hashtab.h.
548 (struct objfile): Add a static_links field.
549 (objfile_register_static_link): New.
550 (objfile_lookup_static_link): New.
551 * printcmd.c (print_variable_and_value): Update call to
553 * python/py-finishbreakpoint.c (bpfinishpy_init): Likewise.
554 * python/py-frame.c (frapy_read_var): Update call to
555 read_var_value, passing it the block coming from symbol lookup.
556 * python/py-framefilter.c (extract_sym): Add a sym_block
557 parameter and set the pointed value to NULL (TODO).
558 (enumerate_args): Update call to extract_sym.
559 (enumerate_locals): Update calls to extract_sym and to
561 * python/py-symbol.c (sympy_value): Update call to
562 read_var_value (TODO).
563 * stack.c (read_frame_local): Update call to read_var_value.
564 (read_frame_arg): Likewise.
565 (return_command): Likewise.
566 * symtab.h (struct symbol_block_ops): Add a get_frame_base
568 (struct symbol): Add a block field.
569 (SYMBOL_BLOCK): New accessor.
570 * valops.c (value_of_variable): Remove frame/block handling and
571 pass the block argument to read_var_value, which does this job
573 (value_struct_elt_for_reference): Update calls to
575 (value_of_this): Pass the block found to read_var_value.
576 * value.h (read_var_value): Add a var_block argument.
577 (default_read_var_value): Likewise.
579 2015-08-25 Yao Qi <yao.qi@linaro.org>
581 * aarch64-linux-nat.c (aarch64_linux_new_thread): Move it to ...
582 * nat/aarch64-linux.c (aarch64_linux_new_thread): ... here.
583 * nat/aarch64-linux.h (aarch64_linux_new_thread): Declare.
585 2015-08-25 Yao Qi <yao.qi@linaro.org>
587 * Makefile.in (aarch64-liunx.o): New rule.
588 (HFILES_NO_SRCDIR): Add aarch64-linux.h.
589 * config/aarch64/linux.mh (NAT_FILE): Add aarch64-linux.o.
590 * aarch64-linux-nat.c: Include nat/aarch64-linux.h.
591 * aarch64-linux-nat.c (aarch64_get_debug_reg_state): Make it
593 (aarch64_linux_prepare_to_resume): Move it nat/aarch64-linux.c.
594 * nat/aarch64-linux-hw-point.h (aarch64_debug_reg_state): Declare
595 * nat/aarch64-linux.c: New file.
596 * nat/aarch64-linux.h: New file.
598 2015-08-25 Yao Qi <yao.qi@linaro.org>
600 * aarch64-linux-nat.c (aarch64_linux_prepare_to_resume): Use
601 lwp_arch_private_info and ptid_of_lwp.
603 2015-08-25 Yao Qi <yao.qi@linaro.org>
605 * aarch64-linux-nat.c (struct arch64_dr_update_callback_param):
606 Move it to nat/aarch64-linux-hw-point.c.
607 (debug_reg_change_callback): Likewise.
608 (aarch64_notify_debug_reg_change): :Likewise.
609 * nat/aarch64-linux-hw-point.c: Include nat/linux-nat.h.
610 (aarch64_dr_update_callback_param): New.
611 (debug_reg_change_callback): New function.
612 (aarch64_notify_debug_reg_change): Likewise.
613 * nat/aarch64-linux-hw-point.h (aarch64_notify_debug_reg_change):
614 Remove the declaration.
616 2015-08-25 Yao Qi <yao.qi@linaro.org>
618 * aarch64-linux-nat.c (aarch64_notify_debug_reg_change):
619 Call current_lwp_ptid.
621 2015-08-25 Yao Qi <yao.qi@linaro.org>
623 * aarch64-linux-nat.c (debug_reg_change_callback): Use
626 2015-08-25 Yao Qi <yao.qi@linaro.org>
628 * aarch64-linux-nat.c (debug_reg_change_callback): Call
629 ptid_get_pid rather than ptid_get_lwp.
631 2015-08-24 Pedro Alves <palves@redhat.com>
633 * NEWS (New commands): Mention set/show remote
634 multiprocess-extensions-packet.
635 * remote.c (remote_query_supported): Only tell the server to use
636 the multiprocess extensions if the user hasn't force-disabled them
637 with "set remote multiprocess-extensions-packet off".
639 2015-08-24 Pedro Alves <palves@redhat.com>
641 * gnulib/update-gnulib.sh (GNULIB_COMMIT_SHA1): Set to
642 1029a8112290f6eee9d7878a391c49db42c999bd.
643 * gnulib/configure, gnulib/config.in, gnulib/aclocal.m4:
645 * gnulib/import/Makefile.am: Update.
646 * gnulib/import/Makefile.in: Update.
647 * gnulib/import/alloca.in.h: Update.
648 * gnulib/import/basename-lgpl.c: Update.
649 * gnulib/import/canonicalize-lgpl.c: Update.
650 * gnulib/import/config.charset: Update.
651 * gnulib/import/dirent.in.h: Update.
652 * gnulib/import/dirfd.c: Update.
653 * gnulib/import/dirname-lgpl.c: Update.
654 * gnulib/import/dirname.h: Update.
655 * gnulib/import/dosname.h: Update.
656 * gnulib/import/errno.in.h: Update.
657 * gnulib/import/extra/snippet/arg-nonnull.h: Update.
658 * gnulib/import/extra/snippet/c++defs.h: Update.
659 * gnulib/import/extra/snippet/warn-on-use.h: Update.
660 * gnulib/import/extra/update-copyright: Update.
661 * gnulib/import/float+.h: Update.
662 * gnulib/import/float.c: Update.
663 * gnulib/import/float.in.h: Update.
664 * gnulib/import/fnmatch.c: Update.
665 * gnulib/import/fnmatch.in.h: Update.
666 * gnulib/import/fnmatch_loop.c: Update.
667 * gnulib/import/fpucw.h: Update.
668 * gnulib/import/frexp.c: Update.
669 * gnulib/import/frexpl.c: Update.
670 * gnulib/import/gettimeofday.c: Update.
671 * gnulib/import/inttypes.in.h: Update.
672 * gnulib/import/isnan.c: Update.
673 * gnulib/import/isnand-nolibm.h: Update.
674 * gnulib/import/isnand.c: Update.
675 * gnulib/import/isnanl-nolibm.h: Update.
676 * gnulib/import/isnanl.c: Update.
677 * gnulib/import/itold.c: Update.
678 * gnulib/import/localcharset.c: Update.
679 * gnulib/import/localcharset.h: Update.
680 * gnulib/import/lstat.c: Update.
681 * gnulib/import/m4/00gnulib.m4: Update.
682 * gnulib/import/m4/absolute-header.m4: Update.
683 * gnulib/import/m4/alloca.m4: Update.
684 * gnulib/import/m4/canonicalize.m4: Update.
685 * gnulib/import/m4/codeset.m4: Update.
686 * gnulib/import/m4/configmake.m4: Update.
687 * gnulib/import/m4/dirent_h.m4: Update.
688 * gnulib/import/m4/dirfd.m4: Update.
689 * gnulib/import/m4/dirname.m4: Update.
690 * gnulib/import/m4/double-slash-root.m4: Update.
691 * gnulib/import/m4/eealloc.m4: Update.
692 * gnulib/import/m4/errno_h.m4: Update.
693 * gnulib/import/m4/exponentd.m4: Update.
694 * gnulib/import/m4/exponentl.m4: Update.
695 * gnulib/import/m4/extensions.m4: Update.
696 * gnulib/import/m4/extern-inline.m4: Update.
697 * gnulib/import/m4/fcntl-o.m4: Update.
698 * gnulib/import/m4/float_h.m4: Update.
699 * gnulib/import/m4/fnmatch.m4: Update.
700 * gnulib/import/m4/fpieee.m4: Update.
701 * gnulib/import/m4/frexp.m4: Update.
702 * gnulib/import/m4/frexpl.m4: Update.
703 * gnulib/import/m4/gettimeofday.m4: Update.
704 * gnulib/import/m4/glibc21.m4: Update.
705 * gnulib/import/m4/gnulib-cache.m4: Update.
706 * gnulib/import/m4/gnulib-common.m4: Update.
707 * gnulib/import/m4/gnulib-comp.m4: Update.
708 * gnulib/import/m4/gnulib-tool.m4: Update.
709 * gnulib/import/m4/include_next.m4: Update.
710 * gnulib/import/m4/inttypes-pri.m4: Update.
711 * gnulib/import/m4/inttypes.m4: Update.
712 * gnulib/import/m4/isnand.m4: Update.
713 * gnulib/import/m4/isnanl.m4: Update.
714 * gnulib/import/m4/largefile.m4: Update.
715 * gnulib/import/m4/localcharset.m4: Update.
716 * gnulib/import/m4/locale-fr.m4: Update.
717 * gnulib/import/m4/locale-ja.m4: Update.
718 * gnulib/import/m4/locale-zh.m4: Update.
719 * gnulib/import/m4/longlong.m4: Update.
720 * gnulib/import/m4/lstat.m4: Update.
721 * gnulib/import/m4/malloc.m4: Update.
722 * gnulib/import/m4/malloca.m4: Update.
723 * gnulib/import/m4/math_h.m4: Update.
724 * gnulib/import/m4/mbrtowc.m4: Update.
725 * gnulib/import/m4/mbsinit.m4: Update.
726 * gnulib/import/m4/mbsrtowcs.m4: Update.
727 * gnulib/import/m4/mbstate_t.m4: Update.
728 * gnulib/import/m4/memchr.m4: Update.
729 * gnulib/import/m4/memmem.m4: Update.
730 * gnulib/import/m4/mmap-anon.m4: Update.
731 * gnulib/import/m4/multiarch.m4: Update.
732 * gnulib/import/m4/nocrash.m4: Update.
733 * gnulib/import/m4/off_t.m4: Update.
734 * gnulib/import/m4/pathmax.m4: Update.
735 * gnulib/import/m4/readlink.m4: Update.
736 * gnulib/import/m4/rename.m4: Update.
737 * gnulib/import/m4/rmdir.m4: Update.
738 * gnulib/import/m4/ssize_t.m4: Update.
739 * gnulib/import/m4/stat.m4: Update.
740 * gnulib/import/m4/stdbool.m4: Update.
741 * gnulib/import/m4/stddef_h.m4: Update.
742 * gnulib/import/m4/stdint.m4: Update.
743 * gnulib/import/m4/stdio_h.m4: Update.
744 * gnulib/import/m4/stdlib_h.m4: Update.
745 * gnulib/import/m4/string_h.m4: Update.
746 * gnulib/import/m4/strstr.m4: Update.
747 * gnulib/import/m4/strtok_r.m4: Update.
748 * gnulib/import/m4/sys_socket_h.m4: Update.
749 * gnulib/import/m4/sys_stat_h.m4: Update.
750 * gnulib/import/m4/sys_time_h.m4: Update.
751 * gnulib/import/m4/sys_types_h.m4: Update.
752 * gnulib/import/m4/time_h.m4: Update.
753 * gnulib/import/m4/unistd_h.m4: Update.
754 * gnulib/import/m4/warn-on-use.m4: Update.
755 * gnulib/import/m4/wchar_h.m4: Update.
756 * gnulib/import/m4/wchar_t.m4: Update.
757 * gnulib/import/m4/wctype_h.m4: Update.
758 * gnulib/import/m4/wint_t.m4: Update.
759 * gnulib/import/malloc.c: Update.
760 * gnulib/import/malloca.c: Update.
761 * gnulib/import/malloca.h: Update.
762 * gnulib/import/math.in.h: Update.
763 * gnulib/import/mbrtowc.c: Update.
764 * gnulib/import/mbsinit.c: Update.
765 * gnulib/import/mbsrtowcs-impl.h: Update.
766 * gnulib/import/mbsrtowcs-state.c: Update.
767 * gnulib/import/mbsrtowcs.c: Update.
768 * gnulib/import/memchr.c: Update.
769 * gnulib/import/memmem.c: Update.
770 * gnulib/import/pathmax.h: Update.
771 * gnulib/import/readlink.c: Update.
772 * gnulib/import/ref-add.sin: Update.
773 * gnulib/import/ref-del.sin: Update.
774 * gnulib/import/rename.c: Update.
775 * gnulib/import/rmdir.c: Update.
776 * gnulib/import/same-inode.h: Update.
777 * gnulib/import/stat.c: Update.
778 * gnulib/import/stdbool.in.h: Update.
779 * gnulib/import/stddef.in.h: Update.
780 * gnulib/import/stdint.in.h: Update.
781 * gnulib/import/stdio.c: Update.
782 * gnulib/import/stdio.in.h: Update.
783 * gnulib/import/stdlib.in.h: Update.
784 * gnulib/import/str-two-way.h: Update.
785 * gnulib/import/streq.h: Update.
786 * gnulib/import/string.in.h: Update.
787 * gnulib/import/stripslash.c: Update.
788 * gnulib/import/strnlen1.c: Update.
789 * gnulib/import/strnlen1.h: Update.
790 * gnulib/import/strstr.c: Update.
791 * gnulib/import/strtok_r.c: Update.
792 * gnulib/import/sys_stat.in.h: Update.
793 * gnulib/import/sys_time.in.h: Update.
794 * gnulib/import/sys_types.in.h: Update.
795 * gnulib/import/time.in.h: Update.
796 * gnulib/import/unistd.in.h: Update.
797 * gnulib/import/verify.h: Update.
798 * gnulib/import/wchar.in.h: Update.
799 * gnulib/import/wctype.in.h: Update.
800 * gnulib/import/gettimeofday.c: New file.
801 * gnulib/import/m4/absolute-header.m4: New file.
802 * gnulib/import/m4/gettimeofday.m4: New file.
803 * gnulib/import/m4/sys_socket_h.m4: New file.
804 * gnulib/import/m4/sys_time_h.m4: New file.
805 * gnulib/import/stdio.c: Delete file.
806 * gnulib/import/sys_time.in.h: New file.
808 2015-08-24 Pedro Alves <palves@redhat.com>
810 * Makefile.in (HFILES_NO_SRCDIR): Add common/gdb_sys_time.h.
811 * common/gdb_sys_time.h: New file.
812 * event-loop.c: Include gdb_sys_time.h instead of sys/time.h.
813 * gdb_select.h: Likewise.
814 * gdb_usleep.c: Likewise.
816 * mi/mi-main.c: Likewise.
817 * mi/mi-parse.h: Likewise.
818 * remote-fileio.c: Likewise.
819 * remote-m32r-sdi.c: Likewise.
820 * remote.c: Likewise.
821 * ser-base.c: Likewise.
822 * ser-pipe.c: Likewise.
823 * ser-tcp.c: Likewise.
824 * ser-unix.c: Likewise.
825 * symfile.c: Likewise.
826 * symfile.c: Likewise. Rename OSIZE to SIZE throughout.
827 * target-memory.c: Include gdb_sys_time.h instead of sys/time.h.
830 2015-08-24 Pedro Alves <palves@redhat.com>
832 * NEWS: Mention removed support for the various ROM monitors.
833 * Makefile.in (ALL_TARGET_OBS): Remove dbug-rom.o, dink32-rom.o,
834 ppcbug-rom.o, m32r-rom.o, dsrec.o and monitor.o from gdb_target_obs.
835 * configure.tgt (h8300-*-*): Remove monitor.o and m32r-rom.o from
837 (m68*-*-*): Remove monitor.o dbug-rom.o and dsrec.o from
839 (microblaze*-linux-*): Remove microblaze-rom.o, monitor.o and
840 dsrec.o from gdb_target_obs.
841 (microblaze*-*-*): Remove microblaze-rom.o, monitor.o and dsrec.o
843 (powerpc-*-lynx*178): Remove monitor.o and dsrec.o from
845 (powerpc*-*-*): Remove monitor.o, dsrec.o, ppcbug-rom.o and
846 dink32-rom.o from gdb_target_obs.
847 (sh*-*-linux*): Remove monitor.o and dsrec.o from gdb_target_obs.
848 (sh*): Remove monitor.o and dsrec.o from gdb_target_obs.
849 * dbug-rom.c, dink32-rom.c, dsrec.c, m32r-rom.c, microblaze-rom.c,
850 monitor.c, monitor.h, ppcbug-rom.c, srec.h: Delete files.
852 2015-08-21 Pedro Alves <palves@redhat.com>
854 * frame.c (null_frame_id): Explicitly zero-initialize.
856 2015-08-21 Tom Tromey <tromey@redhat.com>
858 * dwarf2read.c (struct dwarf2_section_info): Rename field
859 'asection' to 'section'.
860 (dwarf2_has_info, get_section_bfd_owner, get_section_bfd_section)
861 (dwarf2_locate_sections, dwarf2_locate_sections)
862 (locate_dwz_sections, locate_v1_virtual_dwo_sections)
863 (dwarf2_locate_dwo_sections, dwarf2_locate_dwo_sections)
864 (dwarf2_locate_v2_dwp_sections): Adjust.
866 2015-08-21 Patrick Palka <patrick@parcs.ath.cx>
868 * top.h (gdb_in_secondary_prompt_p): Declare.
869 * top.c (gdb_secondary_prompt_depth): Define.
870 (gdb_in_secondary_prompt_p): Define.
871 (gdb_readline_wrapper_cleanup): Decrement
872 gdb_secondary_prompt_depth.
873 (gdb_readline_wrapper): Increment gdb_secondary_prompt_depth.
874 * tui/tui-io.c (tui_getc): Don't clear the prompt line if we
875 are in a secondary prompt.
877 2015-08-21 Patrick Palka <patrick@parcs.ath.cx>
879 * tui/tui-io.c (tui_getc): Use tui_putc instead of waddch to
882 2015-08-21 Gary Benson <gbenson@redhat.com>
884 * gdb_bfd.c (gdb_bfd_iovec_fileio_pread): Add QUIT call.
886 2015-08-21 Gary Benson <gbenson@redhat.com>
888 * target.h (struct target_ops) <to_fileio_open>: New argument
889 warn_if_slow. Update comment. All implementations updated.
890 (target_fileio_open_warn_if_slow): New declaration.
891 * target.c (target_fileio_open): Renamed as...
892 (target_fileio_open_1): ...this. New argument warn_if_slow.
893 Pass warn_if_slow to implementation. Update debug printing.
894 (target_fileio_open): New function.
895 (target_fileio_open_warn_if_slow): Likewise.
896 * gdb_bfd.c (gdb_bfd_iovec_fileio_open): Use new function
897 target_fileio_open_warn_if_slow.
899 2015-08-21 Gary Benson <gbenson@redhat.com>
901 * nat/linux-namespaces.c (linux_mntns_access_fs):
902 Do not overwrite old_chain.
904 2015-08-20 Max Filippov <jcmvbkbc@gmail.com>
906 * arch/xtensa.h: New file.
907 * xtensa-linux-nat.c (gdb_proc_service.h): New #include.
908 (ps_get_thread_area): New function.
909 * xtensa-linux-tdep.c (xtensa_linux_init_abi): Add call to
910 set_gdbarch_fetch_tls_load_module_address to enable TLS support.
911 * xtensa-tdep.c (osabi.h): New #include.
912 (xtensa_gdbarch_init): Call gdbarch_init_osabi to register
913 xtensa-specific hooks.
914 * xtensa-tdep.h (struct xtensa_elf_gregset_t): Add threadptr
915 member and move the structure to arch/xtensa.h.
917 2015-08-21 Pedro Alves <palves@redhat.com>
919 * remote.c (struct readahead_cache): New.
920 (struct remote_state) <readahead_cache>: New field.
921 (remote_open_1): Invalidate the cache.
922 (readahead_cache_invalidate, readahead_cache_invalidate_fd): New
924 (remote_hostio_pwrite): Invalidate the readahead cache.
925 (remote_hostio_pread): Rename to ...
926 (remote_hostio_pread_vFile): ... this.
927 (remote_hostio_pread_from_cache): New function.
928 (remote_hostio_pread): Reimplement.
929 (remote_hostio_close): Invalidate the readahead cache.
931 2015-08-21 Marcin Cieślak <saper@saper.info> (tiny patch)
934 * procfs.c: Include "filestuff.h".
936 2015-08-21 Patrick Palka <patrick@parcs.ath.cx>
938 * tui/tui-data.h (tui_command_info): Remove fields cur_line and
940 * tui/tui-data.c (tui_clear_win_detail) [CMD_WIN]: Don't set
941 cur_line or curch, instead call wmove().
942 (init_win_info) [CMD_WIN]: Likewise.
943 * tui/tui-io.c (tui_puts): Likewise. Don't read cur_line,
944 instead call getcury().
945 (tui_redisplay_readline): Don't set cur_line or curch.
946 (tui_mld_erase_entire_line): Don't read cur_line, instead call
948 (tui_cont_sig): Remove call to wmove.
949 (tui_getc): Don't read cur_line or curch, instead call getcury()
950 or getyx(). Don't set curch.
951 * tui/tui-win.c (make_visible_with_new_height) [CMD_WIN]: Don't
952 set cur_line or curch. Always move cursor to (0,0).
954 2015-08-20 Pedro Alves <palves@redhat.com>
956 * infrun.c (print_target_wait_results): Make extern.
957 * infrun.h (print_target_wait_results): Declare.
958 * remote.c (set_stop_requested_callback): Delete.
959 (process_initial_stop_replies): New function.
960 (remote_start_remote): Use it.
961 (stop_reply_queue_length): New function.
963 2015-08-20 Pedro Alves <palves@redhat.com>
965 * dwarf2read.c (process_full_comp_unit): To tell whether
966 start_subfile managed to deduce a language, test for
967 language_unknown instead of language_c.
969 2015-08-20 Pierre-Marie de Rodat <derodat@adacore.com>
971 * ada-lex.l: Reset the start condition to INITIAL in the rule that
974 2015-08-19 Kevin Buettner <kevinb@redhat.com>
976 * dwarf2read.c (dwarf2_string_attr): New function.
977 (lookup_dwo_unit, process_psymtab_comp_unit_reader)
978 (dwarf2_compute_name, dwarf2_physname, find_file_and_directory)
979 (read_call_site_scope, namespace_name, guess_full_die_structure_name)
980 (anonymous_struct_prefix, prepare_one_comp_unit): Use
981 dwarf2_string_attr in place of dwarf2_attr and DW_STRING.
983 2015-08-18 Doug Evans <dje@google.com>
984 Adrian Sendroiu <adrian.sendroiu@freescale.com>
987 * cli/cli-logging.c (pop_output_files): Don't restore redirection
989 * mi/mi-out.c: #include "vec.h".
990 (ui_filep): New type.
991 (DEV_VEC_P (ui_filep)): New type.
992 (struct ui_out_data) <buffer, original_buffer>: Delete.
993 (struct ui_out_data) <streams>: New member.
994 (mi_ui_out_impl): Add data_destroy field.
995 (mi_field_string, mi_field_fmt): Update.
996 (mi_flush, mi_redirect, field_separator): Update.
997 (mi_open, mi_close): Update.
998 (mi_out_buffered, mi_out_rewind, mi_out_put): Update.
999 (mi_out_data_ctor, mi_out_data_dtor): New functions.
1000 (mi_out_new): Call mi_out_data_ctor.
1002 2015-08-18 Sandra Loosemore <sandra@codesourcery.com>
1004 * remote.c (strprefix): New.
1005 (remote_parse_stop_reply): Use strprefix instead of strncmp
1006 to ensure exact match of keyword.
1008 2015-08-18 Andrew Burgess <andrew.burgess@embecosm.com>
1010 * gdb_bfd.c (debug_bfd_cache): New variable.
1011 (show_bfd_cache_debug): New function.
1012 (gdb_bfd_open): Add debug logging.
1013 (gdb_bfd_ref): Likewise.
1014 (gdb_bfd_unref): Likewise.
1015 (_initialize_gdb_bfd): Add new set/show command.
1016 * NEWS: Mention new command.
1018 2015-08-18 Andrew Burgess <andrew.burgess@embecosm.com>
1020 * gdb_bfd.c (bfd_sharing): New variable.
1021 (show_bfd_sharing): New function.
1022 (gdb_bfd_open): Check bfd_sharing variable.
1023 (_initialize_gdb_bfd): Add new set/show command.
1024 * NEWS: Mention new command.
1026 2015-08-18 Andrew Burgess <andrew.burgess@embecosm.com>
1028 * gdb_bfd.c (struct gdb_bfd_data): Add size, inode, and device id
1030 (struct gdb_bfd_cache_search): Likewise.
1031 (eq_bfd): Compare the size, inode, and device id fields.
1032 (gdb_bfd_open): Initialise the size, inode, and device id fields.
1033 (gdb_bfd_ref): Likewise.
1034 (gdb_bfd_unref): Likewise.
1036 2015-08-18 Pedro Alves <palves@redhat.com>
1038 * linux-nat.c (linux_nat_always_non_stop_p): If the linux_ops
1039 target implements to_always_non_stop_p, call it.
1040 * x86-linux-nat.c (x86_linux_always_non_stop_p): New function.
1041 (x86_linux_create_target): Install it as to_always_non_stop_p
1044 2015-08-17 Doug Evans <dje@google.com>
1046 * ui-out.c (default_ui_out_impl): Add comment.
1048 2015-08-17 Iain Buclaw <ibuclaw@gdcproject.org>
1050 * d-exp.y (type_aggregate_p): New function.
1051 (PrimaryExpression : TypeExp '.' IdentifierExp): Use it.
1052 (classify_inner_name): Likewise.
1053 * d-namespace.c (d_lookup_nested_symbol): Handle TYPE_CODE_ENUM.
1055 2015-08-15 Doug Evans <xdje42@gmail.com>
1057 * psymtab.c (add_psymbol_to_bcache): Remove "val" arg. All callers
1059 (add_psymbol_to_list): Ditto.
1061 2015-08-15 Doug Evans <xdje42@gmail.com>
1063 * dbxread.c (dbx_end_psymtab): Renamed from end_psymtab. All callers
1064 updated. Call end_psymtab_common.
1065 * dwarf2read.c (process_psymtab_comp_unit_reader): Call
1067 (build_type_psymtabs_reader): Ditto.
1068 * psympriv.h (sort_pst_symbols): Delete.
1069 (end_psymtab_common): Declare.
1070 * psymtab.c (sort_pst_symbols): Make static.
1071 (end_psymtab_common): New function.
1072 * xcoffread.c (xcoff_end_psymtab): Call end_psymtab_common.
1074 2015-08-15 Doug Evans <xdje42@gmail.com>
1076 * defs.h (LANGUAGE_BITS): Define.
1077 * psympriv.h (partial_symbol) <domain>: Use SYMBOL_DOMAIN_BITS.
1078 (partial_symbol) <aclass>: Use SYMBOL_ACLASS_BITS.
1079 * symtab.h (general_symbol_info> <language>: Usage LANGUAGE_BITS.
1080 (minimal_symbol_type): Add nr_minsym_types.
1081 (MINSYM_TYPE_BITS): Define.
1082 (minimal_symbol) <type>: Use MINSYM_TYPE_BITS.
1083 (domain_enum_tag): Add NR_DOMAINS.
1084 (SYMBOL_DOMAIN_BITS): Change from 4 to 3.
1085 (SYMBOL_ACLASS_BITS): Define from 6 to 5.
1087 2015-08-15 Doug Evans <xdje42@gmail.com>
1089 * objfiles.h: Whitespace cleanup.
1090 * psympriv.h: Whitespace cleanup.
1091 * psymtab.c: Whitespace/coding convention cleanup.
1093 2015-08-15 Patrick Palka <patrick@parcs.ath.cx>
1095 * inferior.c (detach_inferior_command): Don't call
1096 any_thread_of_process when pid is 0.
1097 (kill_inferior_command): Likewise.
1099 2015-08-14 Doug Evans <xdje42@gmail.com>
1102 * NEWS: Document new /s modifier for the disassemble command.
1103 * cli/cli-cmds.c (disassemble_command): Add support for /s.
1104 (_initialize_cli_cmds): Update online docs of disassemble command.
1105 * disasm.c: #include "source.h".
1106 (struct deprecated_dis_line_entry): Renamed from dis_line_entry.
1108 (dis_line_entry): New struct.
1109 (hash_dis_line_entry, eq_dis_line_entry): New functions.
1110 (allocate_dis_line_table): New functions.
1111 (maybe_add_dis_line_entry, line_has_code_p): New functions.
1112 (dump_insns): New arg end_pc. All callers updated.
1113 (do_mixed_source_and_assembly_deprecated): Renamed from
1114 do_mixed_source_and_assembly. All callers updated.
1115 (do_mixed_source_and_assembly): New function.
1116 (gdb_disassembly): Handle /s (DISASSEMBLY_SOURCE).
1117 * disasm.h (DISASSEMBLY_SOURCE_DEPRECATED): Renamed from
1118 DISASSEMBLY_SOURCE. All uses updated.
1119 (DISASSEMBLY_SOURCE): New macro.
1120 * mi/mi-cmd-disas.c (mi_cmd_disassemble): New modes 4,5.
1122 2015-08-14 Keith Seitz <keiths@redhat.com>
1124 * d-exp.y (PrimaryExpression : TypeExp '.' IdentifierExp): Rename
1125 `typename' to `type_name' to avoid C++ reserved word.
1127 2015-08-14 Keith Seitz <keiths@redhat.com>
1129 * location.c (EL_TYPE, EL_LINESPEC, EL_PROBE, EL_ADDRESS)
1130 (EL_EXPLICIT, EL_STRING): Change macro parameter to "P" to
1133 2015-08-14 Iain Buclaw <ibuclaw@gdcproject.org>
1135 * d-exp.y (PrimaryExpression : TypeExp '.' IdentifierExp): Use
1136 xstrprintf instead of malloc and sprintf.
1137 (PrimaryExpression : IdentifierExp): Avoid operator at end of line.
1138 (lex_one_token): Likewise.
1140 2015-08-14 Matthew Fortune <matthew.fortune@imgtec.com>
1142 * solib-svr4.c (read_program_header): Add base_addr argument to
1143 report the runtime address of the segment.
1144 (find_program_interpreter): Update read_program_header call to pass
1145 a NULL pointer for the new argument.
1146 (scan_dyntag): Add ptr_addr argument to report the runtime address
1148 (scan_dyntag_auxv): Likewise and use thew new base_addr argument of
1149 read_program_header to get the base address of the dynamic segment.
1150 (elf_locate_base): Update uses of scan_dyntag, scan_dyntag_auxv and
1151 read_program_header.
1152 (elf_locate_base): Scan for and handle DT_MIPS_RLD_MAP_REL.
1154 2015-08-14 Matthew Fortune <matthew.fortune@imgtec.com>
1156 * MAINTAINERS (Write After Approval): Add Matthew Fortune.
1158 2015-08-13 Iain Buclaw <ibuclaw@gdcproject.org>
1160 * d-exp.y (%union): Add voidval.
1161 (%token): Add UNKNOWN_NAME as a token to represent an unclassified
1162 name in the lexing stage.
1163 (PostfixExpression): Move symbol completion handling in grammar here
1164 from PrimaryExpression.
1165 (PrimaryExpression): Move routines to handle resolving identifier
1166 tokens in the grammar here from push_expression_name.
1167 (IdentifierExp): Remove the handling of alternating '.' and identifier
1169 (TypeExp): Allow TypeExp to be wrapped in parenthesis in the grammar.
1170 (BasicType): Remove C-style typename rules.
1171 (d_type_from_name, d_module_from_name, push_variable)
1172 (push_fieldnames, push_type_name, push_module_name)
1173 (push_expression_name): Remove.
1174 (lex_one_token): Rename from yylex. Replace pstate with par_state.
1175 (token_and_value): New type.
1176 (token_fifo, popping, name_obstack): New globals.
1177 (classify_name): New function.
1178 (classify_inner_name): Likewise.
1180 (d_parse): Initialize token_fifo, popping and name_obstack.
1182 2015-08-13 Iain Buclaw <ibuclaw@gdcproject.org>
1184 * Makefile.in (SFILES): Add d-namespace.c.
1185 (COMMON_OBS): Add d-namespace.o.
1186 * d-lang.c (d_language_defn): Use d_lookup_symbol_nonlocal as the
1187 la_lookup_symbol_nonlocal callback function pointer.
1188 * d-lang.h (d_lookup_symbol_nonlocal): New declaration.
1189 (d_lookup_nested_symbol): New declaration.
1190 * d-namespace.c: New file.
1192 2015-08-13 Pedro Alves <palves@redhat.com>
1194 * python/py-unwind.c (pyuw_sniffer): Install the invalidate
1195 cleanup after the decref cleanup, not before.
1197 2015-08-13 Pierre-Marie de Rodat <derodat@adacore.com>
1199 * ada-lang.c: Include namespace.h
1200 (aux_add_nonlocal_symbols): Fix a function name in comment.
1201 (ada_add_block_renamings): New.
1202 (add_nonlocal_symbols): Add global renamings handling.
1203 (ada_lookup_symbol_list_worker): Move the symbol lookup part
1205 (ada_add_all_symbols): ... this new function.
1206 (ada_add_block_symbols): Try to match the input name against the
1207 "using directives list", perform a recursive symbol lookup on
1208 the matched declarations.
1209 * block.h (struct block): Move the_namespace to top-level as
1210 namespace_info. Remove the language_specific field.
1211 (BLOCK_NAMESPACE): Update access to the namespace_info field.
1212 * buildsym.h (using_directives): Rename into...
1213 (local_using_directives): ... this.
1214 (global_using_directives): New.
1215 (struct context_stack): Rename the using_directives field into
1216 local_using_directives.
1217 * buildsym.c (finish_block_internal): Deal with the proper
1218 using directives repository (local or global).
1219 (prepare_for_building): Reset local_using_directives. Assert
1220 that there is no pending global using directive.
1221 (reset_symtab_globals): Reset global_using_directives and
1222 local_using_directives.
1223 (end_symtab_get_static_block): Don't ignore symtabs that have
1224 only using directives.
1225 (push_context): Update references to local_using_directives.
1226 (buildsym_init): Do not reset using_directives.
1227 * cp-support.c: Include namespace.h.
1228 * cp-support.h (struct using_direct): Move to namespace.h.
1229 (cp_add_using_directives): Move to namespace.h.
1230 * cp-namespace.c: Include namespace.h
1231 (cp_add_using_directive): Move to namespace.c, rename it to
1232 add_using_directive, add a "using_directives" argument and use
1233 it as the pending using directives repository. All callers
1235 * dwarf2read.c (using_directives): New.
1236 (read_import_statement): Call using_directives.
1237 (read_func_scope): Update references to local_using_directives.
1238 (read_lexical_block_scope): Likewise.
1239 (read_namespace): Update the heading comment, call
1241 * namespace.h: New file.
1242 * namespace.c: New file.
1243 * Makefile.in (SFILES): Add namespace.c.
1244 (COMMON_OBS): Add namespace.o
1246 2015-08-12 Joel Brobecker <brobecker@adacore.com>
1248 * amd64-tdep.c (amd64_displaced_step_fixup): Fix the mask used to
1251 2015-08-12 Keith Seitz <keiths@redhat.com>
1253 * break-catch-throw.c (re_set_exception_catchpoint) Rename
1254 reserved C++ keyword "explicit" to "explicit_loc".
1255 * breakpoint.c (create_overlay_event_breakpoint)
1256 (create_longjmp_master_breakpoint)
1257 (create_std_terminate_master_breakpoint)
1258 (create_exception_master_breakpoint, update_static_tracepoint):
1259 Rename reserved C++ keyword "explicit" to "explicit_loc".
1260 * completer.c (collect_explicit_location_matches)
1261 (explicit_location_completer): Rename reserved C++ keyword
1262 "explicit" to "explicit_loc".
1263 * linespec.c (struct linespec) <explicit>: Rename to "explicit_loc".
1264 (canonicalize_linespec, create_sals_line_offset)
1265 (convert_linespec_to_sals, convert_explicit_location_to_sals)
1266 (event_location_to_sals, decode_objc): Rename reserved C++ keyword
1267 "explicit" to "explicit_loc".
1268 * location.c (struct event_location) <explicit>: Rename to
1270 (initialize_explicit_location, new_explicit_location)
1271 (explicit_location_to_string_internal, explicit_location_to_linespec):
1272 Rename reserved C++ keyword "explicit" to "explicit_loc".
1273 * location.h (explicit_location_to_string)
1274 (explicit_location_to_linespec, initialize_explicit_location)
1275 (new_explicit_location): Rename reserved C++ keyword "explicit"
1277 * mi/mi-cmd-break.c (mi_cmd_break_insert_1): Rename reserved C++
1278 keyword "explicit" to "explicit_loc".
1280 2015-08-12 Keith Seitz <keiths@redhat.com>
1282 * python/python.c (gdbpy_decode_line): Initialize `location' to NULL
1283 and only call decode_line_1 when it is non-NULL.
1285 2015-08-12 Luis Machado <lgustavo@codesourcery.com>
1287 * breakpoint.c (bp_loc_is_permanent): Return 0 when breakpoint
1288 location address is not meaningful.
1289 (breakpoint_address_is_meaningful): Update comment.
1291 2015-08-11 Keith Seitz <keiths@redhat.com>
1293 * NEWS: Mention explicit locations.
1294 * breakpoint.c [LOCATION_HELP_STRING]: New macro.
1295 [BREAK_ARGS_HELP]: Use LOCATION_HELP_STRING.
1296 (_initialize_breakpoint): Update documentation for
1297 "clear", "break", "trace", "strace", "ftrace", and "dprintf".
1299 2015-08-11 Keith Seitz <keiths@redhat.com>
1301 * mi/mi-cmd-break.c (mi_cmd_break_insert_1): Add support for
1302 explicit locations, options "--source", "--function",
1303 "--label", and "--line".
1305 2015-08-11 Keith Seitz <keiths@redhat.com>
1307 * completer.c: Include location.h.
1308 (enum match_type): New enum.
1309 (location_completer): Rename to ...
1310 (linespec_completer): ... this.
1311 (collect_explicit_location_matches, backup_text_ptr)
1312 (explicit_location_completer): New functions.
1313 (location_completer): "New" function; handle linespec
1314 and explicit location completions.
1315 (complete_line_internal): Remove all location completer-specific
1317 * linespec.c (linespec_lexer_lex_keyword, is_ada_operator)
1318 (find_toplevel_char): Export.
1319 (linespec_parse_line_offset): Export.
1320 Issue error if STRING is not numerical.
1321 (gdb_get_linespec_parser_quote_characters): New function.
1322 * linespec.h (linespec_parse_line_offset): Declare.
1323 (get_gdb_linespec_parser_quote_characters): Declare.
1324 (is_ada_operator): Declare.
1325 (find_toplevel_char): Declare.
1326 (linespec_lexer_lex_keyword): Declare.
1327 * location.c (explicit_to_event_location): New function.
1328 (explicit_location_lex_one): New function.
1329 (string_to_explicit_location): New function.
1330 (string_to_event_location): Handle explicit locations.
1331 * location.h (explicit_to_event_location): Declare.
1332 (string_to_explicit_location): Declare.
1334 2015-08-11 Keith Seitz <keiths@redhat.com>
1336 * break-catch-throw.c (re_set_exception_catchpoint): Convert
1337 linespec into explicit location.
1338 * breakpoint.c (create_overlay_breakpoint)
1339 (create_longjmp_master_breakpoint)
1340 (create_std_terminate_master_breakpoint)
1341 (create_exception_master_breakpoint): Convert linespec into explicit
1343 (update_static_tracepoint): Convert linespec into explicit location.
1344 * linespec.c (enum offset_relative_sign, struct line_offset): Move
1346 (struct linespec) <expression, expr_pc, source_filename>
1347 <function_name, label_name, line_offset>: Replace with ...
1348 <explicit>: ... this.
1349 <is_linespec>: New member.
1350 (PARSER_EXPLICIT): New accessor macro.
1351 (undefined_label_error): New function.
1352 (source_file_not_found_error): New function.
1353 (linespec_parse_basic): The parser result is now an explicit location.
1354 Use PARSER_EXPLICIT to access it.
1355 Use undefined_label_error.
1356 (canonicalize_linespec): Convert canonical linespec into explicit
1358 Move string representation of location to explicit_location_to_linespec
1359 and use it and explicit_location_to_string to save string
1360 representations of the canonical location.
1361 (create_sals_line_offset, convert_linespec_to_sals): `ls' contains an
1362 explicit location. Update all references.
1363 (convert_explicit_location_to_sals): New function.
1364 (parse_linespec): Use PARSER_EXPLICIT to access the parser
1365 result's explicit location.
1366 (linespec_state_constructor): Initialize is_linespec.
1367 Use PARSER_EXPLICIT.
1368 (linespec_parser_delete): Use PARSER_EXPLICIT to access the parser's
1370 (event_location_to_sals): For linespec locations, set is_linespec.
1371 Handle explicit locations.
1372 (decode_objc): 'ls' contains an explicit location now. Update all
1374 (symtabs_from_filename): Use source_file_not_found_error.
1375 * location.c (struct event_location.u) <explicit>: New member.
1376 (initialize_explicit_location): New function.
1377 (initialize_event_location): Initialize explicit locations.
1378 (new_explicit_location, get_explicit_location)
1379 (get_explicit_location_const): New functions.
1380 (explicit_to_string_internal): New function; most of contents moved
1381 from canonicalize_linespec.
1382 (explicit_location_to_string): New function.
1383 (explicit_location_to_linespec): New function.
1384 (copy_event_location, delete_event_location)
1385 (event_location_to_string_const, event_location_empty_p): Handle
1387 * location.h (enum offset_relative_sign, struct line_offset): Move
1388 here from linespec.h.
1389 (enum event_location_type): Add EXPLICIT_LOCATION.
1390 (struct explicit_location): New structure.
1391 (explicit_location_to_string): Declare.
1392 (explicit_location_to_linespec): Declare.
1393 (new_explicit_location, get_explicit_locationp
1394 (get_explicit_location_const, initialize_explicit_location): Declare.
1396 2015-08-11 Keith Seitz <keiths@redhat.com>
1398 * break-catch-throw.c (re_set_exception_catchpoint): Convert
1399 linespec for stap probe to probe location.
1400 * breakpoint.c (create_longjmp_master_breakpoint)
1401 (create_exception_master_breakpoint): Likewise.
1402 (break_command_1): Remove local variable `arg_cp'.
1403 Check location type to set appropriate breakpoint ops methods.
1404 (trace_command): Likewise.
1405 * linespec.c (event_location_to_sals): Assert on probe locations.
1406 * location.c (EL_PROBE): Add macro definition.
1407 (new_probe_location, get_probe_location): New functions.
1408 (copy_event_location, delete_event_location, event_location_to_string)
1409 (string_to_event_location, event_location_empty_p): Handle probe
1411 * location.h (enum event_location_type): Add PROBE_LOCATION.
1412 (new_probe_location, get_probe_location): Declare.
1413 * probe.c (parse_probes): Assert that LOCATION is a probe location.
1414 Convert linespec into probe location.
1416 2015-08-11 Keith Seitz <keiths@redhat.com>
1418 * breakpoint.c (create_thread_event_breakpoint, init_breakpoint_sal):
1419 Convert linespec to address location.
1420 * linespec.c (canonicalize_linespec): Do not handle address
1422 (convert_address_location_to_sals): New function; contents moved
1424 (convert_linespc_to_sals): ... here.
1425 (parse_linespec): Remove address locations from linespec grammar.
1426 Remove handling of address locations.
1427 (linespec_lex_to_end): Remove handling of address linespecs.
1428 (event_location_to_sals): Handle ADDRESS_LOCATION.
1429 (linespec_expression_to_pc): Export.
1430 * linespec.h (linespec_expression_to_pc): Add declaration.
1431 * location.c (struct event_location.u) <address>: New member.
1432 (new_address_location, get_address_location): New functions.
1433 (copy_event_location, delete_event_location, event_location_to_string)
1434 (string_to_event_location, event_location_empty_p): Handle address
1436 * location.h (enum event_location_type): Add ADDRESS_LOCATION.
1437 (new_address_location, get_address_location): Declare.
1438 * python/py-finishbreakpoint.c (bpfinishpy_init): Convert linespec
1439 to address location.
1440 * spu-tdep.c (spu_catch_start): Likewise.
1442 2015-08-11 Keith Seitz <keiths@redhat.com>
1444 * ax-gdb.c: Include location.h.
1445 (agent_command_1) Use linespec location instead of address
1447 * break-catch-throw.c: Include location.h.
1448 (re_set_exception_catchpoint): Use linespec locations instead
1450 * breakpoint.c: Include location.h.
1451 (create_overlay_event_breakpoint, create_longjmp_master_breakpoint)
1452 (create_std_terminate_master_breakpoint)
1453 (create_exception_master_breakpoint, update_breakpoints_after_exec):
1454 Use linespec location instead of address string.
1455 (print_breakpoint_location): Use locations and
1456 event_location_to_string.
1457 Print extra_string for pending locations for non-MI streams.
1458 (print_one_breakpoint_location): Use locations and
1459 event_location_to_string.
1460 (init_raw_breakpoint_without_location): Initialize b->location.
1461 (create_thread_event_breakpoint): Use linespec location instead of
1463 (init_breakpoint_sal): Likewise.
1464 Only save extra_string if it is non-NULL and not the empty string.
1465 Use event_location_to_string instead of `addr_string'.
1466 Constify `p' and `endp'.
1467 Use skip_spaces_const/skip_space_const instead of non-const versions.
1468 Copy the location into the breakpoint.
1469 If LOCATION is NULL, save the breakpoint address as a linespec location
1470 instead of an address string.
1471 (create_breakpoint_sal): Change `addr_string' parameter to a struct
1472 event_location. All uses updated.
1473 (create_breakpoints_sal): Likewise for local variable `addr_string'.
1474 (parse_breakpoint_sals): Use locations instead of address strings.
1475 Remove check for empty linespec with conditional.
1477 (decode_static_tracepoint_spec): Make argument const and update
1479 (create_breakpoint): Change `arg' to a struct event_location and
1481 Remove `copy_arg' and `addr_start'.
1482 If EXTRA_STRING is empty, set it to NULL.
1483 Don't populate `canonical' for pending breakpoints.
1484 Pass `extra_string' to find_condition_and_thread.
1485 Clear `extra_string' if `rest' was NULL.
1486 Do not error with "garbage after location" if setting a dprintf
1488 Copy the location into the breakpoint instead of an address string.
1489 (break_command_1): Use string_to_event_location and pass this to
1490 create_breakpoint instead of an address string.
1491 Check against `arg_cp' for a probe linespec.
1492 (dprintf_command): Use string_to_event_location and pass this to
1493 create_breakpoint instead of an address string.
1494 Throw an exception if no format string was specified.
1495 (print_recreate_ranged_breakpoint): Use event_location_to_string
1496 instead of address strings.
1497 (break_range_command, until_break_command)
1498 (init_ada_exception_breakpoint): Use locations instead
1500 (say_where): Print out extra_string for pending locations.
1501 (base_breakpoint_dtor): Delete `location' and `location_range_end' of
1503 (base_breakpoint_create_sals_from_location): Use struct event_location
1504 instead of address string.
1505 Remove `addr_start' and `copy_arg' parameters.
1506 (base_breakpoint_decode_location): Use struct event_location instead of
1508 (bkpt_re_set): Use locations instead of address strings.
1509 Use event_location_empty_p to check for unset location.
1510 (bkpt_print_recreate): Use event_location_to_string instead of
1512 Print out extra_string for pending locations.
1513 (bkpt_create_sals_from_location, bkpt_decode_location)
1514 (bkpt_probe_create_sals_from_location): Use struct event_location
1515 instead of address string.
1516 (bkpt_probe_decode_location): Use struct event_location instead of
1518 (tracepoint_print_recreate): Use event_location_to_string to
1519 recreate the tracepoint.
1520 (tracepoint_create_sals_from_location, tracepoint_decode_location)
1521 (tracepoint_probe_create_sals_from_location)
1522 (tracepoint_probe_decode_location): Use struct event_location
1523 instead of address string.
1524 (dprintf_print_recreate): Use event_location_to_string to recreate
1526 (dprintf_re_set): Remove check for valid/missing format string.
1527 (strace_marker_create_sals_from_location)
1528 (strace_marker_create_breakpoints_sal, strace_marker_decode_location)
1529 (update_static_tracepoint): Use struct event_location instead of
1531 (location_to_sals): Likewise.
1532 Pass `extra_string' to find_condition_and_thread.
1533 For newly resolved pending breakpoint locations, clear the location's
1534 string representation.
1535 Assert that the breakpoint's condition string is NULL when
1536 condition_not_parsed.
1537 (breakpoint_re_set_default, create_sals_from_location_default)
1538 (decode_location_default, trace_command, ftrace_command)
1539 (strace_command, create_tracepoint_from_upload): Use locations
1540 instead of address strings.
1541 * breakpoint.h (struct breakpoint_ops) <create_sals_from_location>:
1542 Use struct event_location instead of address string.
1544 <decode_location>: Likewise.
1545 (struct breakpoint) <addr_string>: Change to struct event_location
1546 and rename `location'.
1547 <addr_string_range_end>: Change to struct event_location and rename
1548 `location_range_end'.
1549 (create_breakpoint): Use struct event_location instead of address
1551 * cli/cli-cmds.c: Include location.h.
1552 (edit_command, list_command): Use locations instead of address strings.
1553 * elfread.c: Include location.h.
1554 (elf_gnu_ifunc_resolver_return_stop): Use event_location_to_string.
1555 * guile/scm-breakpoint.c: Include location.h.
1556 (bpscm_print_breakpoint_smob): Use event_location_to_string.
1557 (gdbscm_register_breakpoint): Use locations instead of address
1559 * linespec.c: Include location.h.
1560 (struct ls_parser) <stream>: Change to const char *.
1561 (PARSER_STREAM): Update.
1562 (lionespec_lexer_lex_keyword): According to find_condition_and_thread,
1563 keywords must be followed by whitespace.
1564 (canonicalize_linespec): Save a linespec location into `canonical'.
1565 Save a canonical linespec into `canonical'.
1566 (parse_linespec): Change `argptr' to const char * and rename `arg'.
1568 Update function description.
1569 (linespec_parser_new): Initialize `parser'.
1570 Update initialization of parsing stream.
1571 (event_location_to_sals): New function.
1572 (decode_line_full): Change `argptr' to a struct event_location and
1573 rename it `location'.
1574 Use locations instead of address strings.
1575 Call event_location_to_sals instead of parse_linespec.
1576 (decode_line_1): Likewise.
1577 (decode_line_with_current_source, decode_line_with_last_displayed)
1578 Use locations instead of address strings.
1579 (decode_objc): Likewise.
1580 Change `argptr' to const char * and rename `arg'.
1581 (destroy_linespec_result): Delete the linespec result's location
1582 instead of freeing the address string.
1583 * linespec.h (struct linespec_result) <addr_string>: Change to
1584 struct event_location and rename to ...
1585 <location>: ... this.
1586 (decode_line_1, decode_line_full): Change `argptr' to struct
1587 event_location. All callers updated.
1588 * mi/mi-cmd-break.c: Include language.h, location.h, and linespec.h.
1589 (mi_cmd_break_insert_1): Use locations instead of address strings.
1590 Throw an error if there was "garbage" at the end of the specified
1592 * probe.c: Include location.h.
1593 (parse_probes): Change `argptr' to struct event_location.
1594 Use event locations instead of address strings.
1595 * probe.h (parse_probes): Change `argptr' to struct event_location.
1596 * python/py-breakpoint.c: Include location.h.
1597 (bppy_get_location): Constify local variable `str'.
1598 Use event_location_to_string.
1599 (bppy_init): Use locations instead of address strings.
1600 * python/py-finishbreakpoint.c: Include location.h.
1601 (bpfinishpy_init): Remove local variable `addr_str'.
1602 Use locations instead of address strings.
1603 * python/python.c: Include location.h.
1604 (gdbpy_decode_line): Use locations instead of address strings.
1605 * remote.c: Include location.h.
1606 (remote_download_tracepoint): Use locations instead of address
1608 * spu-tdep.c: Include location.h.
1609 (spu_catch_start): Remove local variable `buf'.
1610 Use locations instead of address strings.
1611 * tracepoint.c: Include location.h.
1612 (scope_info): Use locations instead of address strings.
1613 (encode_source_string): Constify parameter `src'.
1614 * tracepoint.h (encode_source_string): Likewise.
1616 2015-08-11 Keith Seitz <keiths@redhat.com>
1618 * Makefile.in (SFILES): Add location.c.
1619 (HFILES_NO_SRCDIR): Add location.h.
1620 (COMMON_OBS): Add location.o.
1621 * linespec.c (linespec_lex_to_end): New function.
1622 * linespec.h (linespec_lex_to_end): Declare.
1623 * location.c: New file.
1624 * location.h: New file.
1626 2015-08-11 Keith Seitz <keiths@redhat.com>
1628 * breakpoint.h (struct breakpoint_ops) <create_sals_from_address>:
1629 Renamed to create_sals_from_location.
1630 <decode_linespec>: Renamed to decode_location.
1632 * breakpoint.c (create_sals_from_address_default): Renamed to ...
1633 (create_sals_from_location_default): ... this.
1634 (addr_string_to_sals): Renamed to ...
1635 (location_to_sals): ... this.
1636 (decode_linespec_default): Renamed to ...
1637 (decode_location_default): ... this.
1638 (base_breakpoint_create_sals_from_address): Renamed to ...
1639 (base_breakpoint_create_sals_from_location): ... this.
1640 (bkpt_create_sals_from_address): Renamed to ...
1641 (bkpt_create_sals_from_location): ... this.
1642 (bkpt_decode_linespec): Renamed to ...
1643 (bkpt_decode_location): ... this.
1644 (bkpt_probe_create_sals_from_address): Renamed to ...
1645 (bkpt_probe_create_sals_from_location): ... this.
1646 (tracepoint_create_sals_from_address): Renamed to ...
1647 (tracepoint_create_sals_from_location): ... this.
1648 (tracepoint_decode_linespec): Renamed to ...
1649 (tracepoint_decode_location): ... this.
1650 (tracepoint_probe_create_sals_from_address): Renamed to ...
1651 (tracepoint_probe_create_sals_from_location): ... this.
1652 (tracepoint_probe_decode_linespec): Renamed to ...
1653 (tracepoint_probe_decode_location): ... this.
1654 (strace_marker_create_sals_from_address): Renamed to ...
1655 (strace_marker_create_sals_from_location): ... this.
1656 (decode_linespec_default): Renamed to ...
1657 (decode_location_default): ... this.
1659 2015-08-10 Doug Evans <dje@google.com>
1660 Keith Seitz <keiths@redhat.com>
1663 * symtab.c (make_file_symbol_completion_list_1): Renamed from
1664 make_file_symbol_completion_list and made static.
1665 (make_file_symbol_completion_list): New function.
1667 2015-08-10 Joel Brobecker <brobecker@adacore.com>
1669 * infrun.c (follow_fork, displaced_step_prepare, resume): Remove
1670 trailing new-line at end of warning message.
1671 (proceed): Add i18n marker to error messages.
1673 2015-08-07 Pedro Alves <palves@redhat.com>
1675 * linux-nat.c (linux_nat_always_non_stop_p): Return 1.
1677 2015-08-07 Pedro Alves <palves@redhat.com>
1679 * s390-linux-tdep.c (is_non_branch_ril)
1680 (s390_displaced_step_copy_insn): New functions.
1681 (s390_displaced_step_fixup): Update comment.
1682 (s390_gdbarch_init): Install s390_displaced_step_copy_insn as
1683 gdbarch_displaced_step_copy_insn hook.
1685 2015-08-07 Pedro Alves <palves@redhat.com>
1687 * infrun.c (displaced_step_prepare_throw): Return -1 if
1688 gdbarch_displaced_step_copy_insn returns NULL. Update intro
1690 * rs6000-tdep.c (LWARX_MASK, LWARX_INSTRUCTION, LDARX_INSTRUCTION)
1691 (STWCX_MASK, STWCX_INSTRUCTION, STDCX_INSTRUCTION): Move higher up
1693 (ppc_displaced_step_copy_insn): New function.
1694 (ppc_displaced_step_fixup): Update comment.
1695 (rs6000_gdbarch_init): Install ppc_displaced_step_copy_insn as
1696 gdbarch_displaced_step_copy_insn hook.
1697 * gdbarch.sh (displaced_step_copy_insn): Document what happens on
1699 * gdbarch.h: Regenerate.
1701 2015-08-07 Pedro Alves <palves@redhat.com>
1703 * inferior.h (struct inferior) <displaced_stepping_failed>: New
1705 * infrun.c (use_displaced_stepping_now_p): New parameter 'inf'.
1706 Return false if dispaced stepping failed before.
1707 (resume): Pass the current inferior to
1708 use_displaced_stepping_now_p. Wrap displaced_step_prepare in
1709 TRY/CATCH. If we get a MEMORY_ERROR, set the inferior's
1710 displaced_stepping_failed flag, and fall back to an in-line
1713 2015-08-07 Pedro Alves <palves@redhat.com>
1715 * darwin-nat.c (darwin_stop): Rename to ...
1716 (darwin_interrupt): ... this.
1717 (_initialize_darwin_inferior): Adjust.
1718 * gnu-nat.c (gnu_stop): Delete.
1719 (gnu_target): Don't install gnu_stop.
1720 * inf-ptrace.c (inf_ptrace_stop): Rename to ...
1721 (inf_ptrace_interrupt): ... this.
1722 (inf_ptrace_target): Adjust.
1723 * infcmd.c (interrupt_target_1): Use target_interrupt instead of
1725 * linux-nat (linux_nat_stop): Rename to ...
1726 (linux_nat_interrupt): ... this.
1727 (linux_nat_stop): Reimplement.
1728 (linux_nat_add_target): Install linux_nat_interrupt.
1729 * nto-procfs.c (nto_interrupt_twice): Rename to ...
1730 (nto_handle_sigint_twice): ... this.
1731 (nto_interrupt): Rename to ...
1732 (nto_handle_sigint): ... this. Call target_interrupt instead of
1734 (procfs_wait): Adjust.
1735 (procfs_stop): Rename to ...
1736 (procfs_interrupt): ... this.
1737 (init_procfs_targets): Adjust.
1738 * procfs.c (procfs_stop): Rename to ...
1739 (procfs_interrupt): ... this.
1740 (procfs_target): Adjust.
1741 * remote-m32r-sdi.c (m32r_stop): Rename to ...
1742 (m32r_interrupt): ... this.
1743 (init_m32r_ops): Adjust.
1744 * remote-sim.c (gdbsim_stop_inferior): Rename to ...
1745 (gdbsim_interrupt_inferior): ... this.
1746 (gdbsim_stop): Rename to ...
1747 (gdbsim_interrupt): ... this.
1748 (gdbsim_cntrl_c): Adjust.
1749 (init_gdbsim_ops): Adjust.
1750 * remote.c (sync_remote_interrupt): Adjust comments.
1751 (remote_stop_as): Rename to ...
1752 (remote_interrupt_as): ... this.
1753 (remote_stop): Adjust comment.
1754 (remote_interrupt): New function.
1755 (init_remote_ops): Install remote_interrupt.
1756 * target.c (target_interrupt): New function.
1757 * target.h (struct target_ops) <to_interrupt>: New field.
1758 (target_interrupt): New declaration.
1759 * windows-nat.c (windows_stop): Rename to ...
1760 (windows_interrupt): ... this.
1761 * target-delegates.c: Regenerate.
1763 2015-08-07 Pedro Alves <palves@redhat.com>
1765 * signal-while-stepping-over-bp-other-thread.exp: Expect "restart
1766 threads" as alternative to "switching back to stepped thread".
1768 2015-08-07 Pedro Alves <palves@redhat.com>
1770 * NEWS: Mention "maint set/show target-non-stop".
1771 * breakpoint.c (update_global_location_list): Check
1772 target_is_non_stop_p instead of non_stop.
1773 * infcmd.c (attach_command_post_wait, attach_command): Likewise.
1774 * infrun.c (show_can_use_displaced_stepping)
1775 (can_use_displaced_stepping_p, start_step_over_inferior):
1777 (internal_resume_ptid): New function.
1779 (proceed): Check target_is_non_stop_p instead of non_stop. If in
1780 all-stop mode but the target is always in non-stop mode, start all
1781 the other threads that are implicitly resumed too.
1782 (for_each_just_stopped_thread, fetch_inferior_event)
1783 (adjust_pc_after_break, stop_all_threads): Check
1784 target_is_non_stop_p instead of non_stop.
1785 (handle_inferior_event): Likewise. Handle detach-fork in all-stop
1786 with the target always in non-stop mode.
1787 (handle_signal_stop) <random signal>: Check target_is_non_stop_p
1788 instead of non_stop.
1789 (switch_back_to_stepped_thread): Check target_is_non_stop_p
1790 instead of non_stop.
1791 (keep_going_stepped_thread): Use internal_resume_ptid.
1792 (stop_waiting): If in all-stop mode, and the target is in non-stop
1793 mode, stop all threads.
1794 (keep_going_pass): Likewise, when starting a new in-line step-over
1796 * linux-nat.c (get_pending_status, select_event_lwp)
1797 (linux_nat_filter_event, linux_nat_wait_1, linux_nat_wait): Check
1798 target_is_non_stop_p instead of non_stop.
1799 (linux_nat_always_non_stop_p): New function.
1800 (linux_nat_stop): Check target_is_non_stop_p instead of non_stop.
1801 (linux_nat_add_target): Install linux_nat_always_non_stop_p.
1802 * target-delegates.c: Regenerate.
1803 * target.c (target_is_non_stop_p): New function.
1804 (target_non_stop_enabled, target_non_stop_enabled_1): New globals.
1805 (maint_set_target_non_stop_command)
1806 (maint_show_target_non_stop_command): New functions.
1807 (_initilize_target): Install "maint set/show target-non-stop"
1809 * target.h (struct target_ops) <to_always_non_stop_p>: New field.
1810 (target_non_stop_enabled): New declaration.
1811 (target_is_non_stop_p): New declaration.
1813 2015-08-07 Pedro Alves <pedro@codesourcery.com>
1815 * breakpoint.c (breakpoints_should_be_inserted_now): If any thread
1816 has a pending status, return true.
1817 * gdbthread.h: Include target/waitstatus.h.
1818 (struct thread_suspend_state) <stop_reason, waitstatus_pending_p,
1819 stop_pc>: New fields.
1820 (struct thread_info) <resumed>: New field.
1821 (set_resumed): Declare.
1822 * infrun.c: Include "event-loop.h".
1823 (infrun_async_inferior_event_token, infrun_is_async): New globals.
1824 (infrun_async): New function.
1825 (clear_step_over_info): Add debug output.
1826 (displaced_step_in_progress_any_inferior): New function.
1827 (displaced_step_fixup): New returns int.
1828 (start_step_over): Handle in-line step-overs too. Assert the
1829 thread is marked resumed.
1830 (resume_cleanups): Clear the thread's resumed flag.
1831 (resume): Set the thread's resumed flag. Return early if the
1832 thread has a pending status. Allow stepping a breakpoint with no
1834 (proceed): Adjust to check 'resumed' instead of 'executing'.
1835 (clear_proceed_status_thread): If the thread has a pending status,
1836 and that status is a finished step, discard the pending status.
1837 (clear_proceed_status): Don't clear step_over_info here.
1838 (random_pending_event_thread, do_target_wait): New functions.
1839 (prepare_for_detach, wait_for_inferior, fetch_inferior_event): Use
1841 (wait_one): New function.
1842 (THREAD_STOPPED_BY): New macro.
1843 (thread_stopped_by_watchpoint, thread_stopped_by_sw_breakpoint)
1844 (thread_stopped_by_hw_breakpoint): New functions.
1845 (switch_to_thread_cleanup, save_waitstatus, stop_all_threads): New
1847 (handle_inferior_event): Also call set_resumed(false) on all
1848 threads implicitly stopped by the event.
1849 (restart_threads, resumed_thread_with_pending_status): New
1851 (finish_step_over): If we were doing an in-line step-over before,
1852 and no longer are after trying to start a new step-over, restart
1853 all threads. If we have multiple threads with pending events,
1854 save the current event and go through the event loop again.
1855 (handle_signal_stop): Return early if finish_step_over returns
1857 <random signal>: If we get a signal while stepping over a
1858 breakpoint in-line in non-stop mode, restart all threads. Clear
1859 step_over_info before delivering the signal.
1860 (keep_going_stepped_thread): Use internal_error instead of
1861 gdb_assert. Mark the thread as resumed.
1862 (keep_going_pass_signal): Assert the thread isn't already resumed.
1863 If some other thread is doing an in-line step-over, defer the
1864 resume. If we just started a new in-line step-over, stop all
1865 threads. Don't clear step_over_info.
1866 (infrun_async_inferior_event_handler): New function.
1867 (_initialize_infrun): Create async event handler with
1868 infrun_async_inferior_event_handler as callback.
1869 (infrun_async): New declaration.
1870 * target.c (target_async): New function.
1871 * target.h (target_async): Declare macro and readd as function
1873 * target/waitstatus.h (enum target_stop_reason)
1874 <TARGET_STOPPED_BY_SINGLE_STEP>: New value.
1875 * thread.c (new_thread): Clear the new waitstatus field.
1876 (set_resumed): New function.
1878 2015-08-07 Pedro Alves <palves@redhat.com>
1880 * infrun.c (keep_going_stepped_thread): New function, factored out
1882 (switch_back_to_stepped_thread): ... here.
1884 2015-08-07 Pedro Alves <palves@redhat.com>
1886 * infrun.c (currently_stepping): Extend intro comment.
1887 * target.h (target_resume): Extend intro comment.
1889 2015-08-07 Pedro Alves <palves@redhat.com>
1891 * infrun.c (switch_back_to_stepped_thread): Use ecs->ptid instead
1892 of inferior_ptid. If the stepped thread vanished, return 0
1893 instead of resuming here. Use reset_ecs. Print the prev_pc and
1894 the current stop_pc in log message. Clear trap_expected if the
1895 thread advanced. Don't pass currently_stepping to
1898 2015-08-07 Pedro Alves <palves@redhat.com>
1900 * gdbthread.h (struct thread_info) <prev_pc>: Extend comment.
1901 * infrun.c (struct execution_control_state): Move higher up in the
1903 (reset_ecs): New function.
1904 (start_step_over): Now returns int. Rewrite to use
1905 keep_going_pass_signal instead of manually starting a displaced step.
1906 (resume): Don't call set_running here. If displaced stepping
1907 can't start now, clear trap_expected.
1908 (find_thread_needs_step_over): Delete function.
1909 (proceed): Set up finish_thread_state_cleanup. Call set_running.
1910 If the current thread needs a step over, push it in the step-over
1911 chain. Don't set insert breakpoints nor call resume directly
1912 here. Instead rewrite to use start_step_over and
1913 keep_going_pass_signal.
1914 (finish_step_over): New function.
1915 (handle_signal_stop): Call finish_step_over instead of
1917 (switch_back_to_stepped_thread): If the event thread needs another
1918 step-over do that first. Use start_step_over.
1919 (keep_going_pass_signal): New function, factored out from ...
1920 (keep_going): ... here.
1921 (_initialize_infrun): Comment moved here.
1922 * thread.c (set_running_thread): New function.
1923 (set_running, finish_thread_state): Use set_running_thread.
1925 2015-08-07 Pedro Alves <palves@redhat.com>
1927 * gdbthread.h (struct thread_info) <step_over_prev,
1928 step_over_next>: New fields.
1929 (thread_step_over_chain_enqueue, thread_step_over_chain_remove)
1930 (thread_step_over_chain_next, thread_is_in_step_over_chain): New
1932 * infrun.c (struct displaced_step_request): Delete.
1933 (struct displaced_step_inferior_state) <step_request_queue>:
1935 (displaced_step_prepare): Assert that trap_expected is set. Use
1936 thread_step_over_chain_enqueue. Split starting a new displaced
1938 (start_step_over): ... this new function.
1939 (resume): Assert the thread isn't waiting for a step over already.
1940 (proceed): Assert the thread isn't waiting for a step over
1942 (infrun_thread_stop_requested): Adjust to remove threads from the
1943 embedded step-over chain.
1944 (handle_inferior_event) <fork/vfork>: Call start_step_over after
1945 displaced_step_fixup.
1946 (handle_signal_stop): Call start_step_over after
1947 displaced_step_fixup.
1948 * infrun.h (step_over_queue_head): New declaration.
1949 * thread.c (step_over_chain_enqueue, step_over_chain_remove)
1950 (thread_step_over_chain_next, thread_is_in_step_over_chain)
1951 (thread_step_over_chain_enqueue)
1952 (thread_step_over_chain_remove): New functions.
1953 (delete_thread_1): Remove thread from the step-over chain.
1955 2015-08-07 Pedro Alves <palves@redhat.com>
1957 * infrun.c (thread_still_needs_step_over): Rename to ...
1958 (thread_still_needs_step_over_bp): ... this.
1959 (enum step_over_what): New.
1960 (thread_still_needs_step_over): Reimplement.
1962 2015-08-07 Pedro Alves <palves@redhat.com>
1964 * remote.c (remote_wait_as): If not waiting for a stop reply,
1965 return TARGET_WAITKIND_NO_RESUMED. If TARGET_WNOHANG is
1966 requested, don't block waiting forever.
1968 2015-08-07 Pedro Alves <pedro@codesourcery.com>
1970 * infrun.c (adjust_pc_after_break): Now takes thread_info and
1971 waitstatus pointers instead of an ecs. Adjust.
1972 (handle_inferior_event): Adjust caller.
1974 2015-08-07 Pedro Alves <palves@redhat.com>
1976 * infrun.c (handle_inferior_event): If we get
1977 TARGET_WAITKIND_SIGNALLED or TARGET_WAITKIND_EXITED in non-stop
1978 mode, mark all threads of the exiting process as not-executing.
1979 (normal_stop): If we get TARGET_WAITKIND_SIGNALLED or
1980 TARGET_WAITKIND_EXITED in non-stop mode, finish all threads of the
1981 exiting process, if inferior_ptid still points at a process.
1982 * thread.c (struct current_thread_cleanup) <next>: New field.
1983 (current_thread_cleanup_chain): New global.
1984 (restore_current_thread_ptid_changed): New function.
1985 (restore_current_thread_cleanup_dtor): Remove the cleanup from the
1986 current_thread_cleanup_chain list.
1987 (make_cleanup_restore_current_thread): Add the cleanup data to the
1988 current_thread_cleanup_chain list.
1989 (_initialize_thread): Install restore_current_thread_ptid_changed
1990 as thread_ptid_changed observer.
1992 2015-08-07 Joel Brobecker <brobecker@adacore.com>
1994 * dtrace-probe.c (dtrace_process_dof): Ignore the objfile's DOF
1995 data if a DTRACE_DOF_SECT_TYPE_PROVIDER section is found to be
1996 smaller than expected.
1998 2015-08-07 Andrew Burgess <andrew.burgess@embecosm.com>
2000 * stack.c (get_frame_language): Moved ...
2001 * frame.c (get_frame_language): ... to here.
2002 * language.h (get_frame_language): Declaration moved to frame.h.
2003 * frame.h: Add language.h include, for language enum.
2004 (get_frame_language): Declaration moved from language.h.
2005 * language.c: Add frame.h include.
2006 * top.c: Add frame.h include.
2007 * symtab.h (struct obj_section): Declare.
2008 (struct cmd_list_element): Declare.
2010 2015-08-07 Andrew Burgess <andrew.burgess@embecosm.com>
2012 * language.c (show_language_command): Find selected frame before
2013 asking for the language of that frame.
2014 (set_language_command): Likewise.
2015 * language.h (get_frame_language): Add frame parameter.
2016 * stack.c (get_frame_language): Add frame parameter, assert
2017 parameter is not NULL, update comment and reindent.
2018 * top.c (check_frame_language_change): Pass the selected frame
2019 into get_frame_language.
2021 2015-08-07 Markus Metzger <markus.t.metzger@intel.com>
2023 * btrace.c (btrace_compute_ftrace_bts): Clear insn flags.
2024 (pt_btrace_insn_flags): New.
2025 (ftrace_add_pt): Call pt_btrace_insn_flags.
2026 * btrace.h (btrace_insn_flag): New.
2027 (btrace_insn) <flags>: New.
2028 * record-btrace.c (btrace_insn_history): Print insn prefix.
2029 * NEWS: Announce it.
2031 2015-08-07 Markus Metzger <markus.t.metzger@intel.com>
2033 * configure.ac: Check for PERF_ATTR_SIZE_VER5 in linux/perf_event.h
2034 * configure: Regenerate.
2036 2015-08-06 Yaakov Selkowitz <yselkowi@redhat.com>
2038 * Makefile.in (LIBICONV): Define.
2039 (CLIBS): Add LIBICONV.
2040 * acinclude.m4: Use config/iconv.m4 instead of custom AM_ICONV.
2041 * configure: Regenerate.
2043 2015-08-06 Simon Marchi <simon.marchi@ericsson.com>
2044 Pedro Alves <palves@redhat.com>
2046 * arm-tdep.c (set_fp_model_sfunc): Add cast from integer to enum.
2047 (arm_set_abi): Likewise.
2048 * ax-general.c (ax_print): Likewise.
2049 * c-exp.y (exp : string_exp): Likewise.
2050 * compile/compile-loc2c.c (compute_stack_depth_worker): Likewise.
2051 (do_compile_dwarf_expr_to_c): Likewise.
2052 * cp-name-parser.y (demangler_special : DEMANGLER_SPECIAL start):
2054 * dwarf2expr.c (execute_stack_op): Likewise.
2055 * dwarf2loc.c (dwarf2_compile_expr_to_ax): Likewise.
2056 (disassemble_dwarf_expression): Likewise.
2057 * dwarf2read.c (dwarf2_add_member_fn): Likewise.
2058 (read_array_order): Likewise.
2059 (abbrev_table_read_table): Likewise.
2060 (read_attribute_value): Likewise.
2061 (skip_unknown_opcode): Likewise.
2062 (dwarf_decode_macro_bytes): Likewise.
2063 (dwarf_decode_macros): Likewise.
2064 * eval.c (value_f90_subarray): Likewise.
2065 * guile/scm-param.c (gdbscm_make_parameter): Likewise.
2066 * i386-linux-tdep.c (i386_canonicalize_syscall): Likewise.
2067 * infrun.c (handle_command): Likewise.
2068 * memory-map.c (memory_map_start_memory): Likewise.
2069 * osabi.c (set_osabi): Likewise.
2070 * parse.c (operator_length_standard): Likewise.
2071 * ppc-linux-tdep.c (ppc_canonicalize_syscall): Likewise, and use
2072 single return point.
2073 * python/py-frame.c (gdbpy_frame_stop_reason_string): Likewise.
2074 * python/py-symbol.c (gdbpy_lookup_symbol): Likewise.
2075 (gdbpy_lookup_global_symbol): Likewise.
2076 * record-full.c (record_full_restore): Likewise.
2077 * regcache.c (regcache_register_status): Likewise.
2078 (regcache_raw_read): Likewise.
2079 (regcache_cooked_read): Likewise.
2080 * rs6000-tdep.c (powerpc_set_vector_abi): Likewise.
2081 * symtab.c (initialize_ordinary_address_classes): Likewise.
2082 * target-debug.h (target_debug_print_signals): Likewise.
2083 * utils.c (do_restore_current_language): Likewise.
2085 2015-08-06 Clem Dickey <clemd@acm.org>
2088 * python/lib/gdb/command/type_printers.py (InfoTypePrinter): Fix typo.
2090 2015-08-06 Simon Marchi <simon.marchi@ericsson.com>
2092 * complaints.c (enum complaint_series): Add newlines and remove
2093 out of date comment.
2094 (struct complaints) <series>: Change type to enum
2095 complaint_series and remove out of date comment.
2096 (symfile_complaint_hook): Use equivalent enum value
2097 ISOLATED_MESSAGE instead of 0.
2099 2015-08-06 Pedro Alves <palves@redhat.com>
2101 * nat/linux-waitpid.c (my_waitpid): Only print *status if waitpid
2104 2015-08-06 Pierre Langlois <pierre.langlois@arm.com>
2106 * common/agent.c (symbol_list) <required>: Remove.
2108 2015-08-06 Pedro Alves <palves@redhat.com>
2110 * target/waitstatus.h (enum target_stop_reason)
2111 <TARGET_STOPPED_BY_SINGLE_STEP>: New value.
2113 2015-08-05 Pedro Alves <palves@redhat.com>
2114 Joel Brobecker <brobecker@adacore.com>
2116 * breakpoint.c (bpstat_what) <bp_longjmp, bp_longjmp_call_dummy>
2117 <bp_exception, bp_longjmp_resume, bp_exception_resume>: Handle the
2118 case where BS->STOP is not set.
2120 2015-08-05 Ulrich Weigand <uweigand@de.ibm.com>
2122 * nat/gdb_thread_db.h: Add copyright header.
2123 Protect against multiple inclusion.
2125 2015-08-05 Yao Qi <yao.qi@linaro.org>
2127 * aarch64-linux-nat.c (get_thread_id): Remove.
2128 (debug_reg_change_callback): Call ptid_get_lwp instead of
2130 (fetch_gregs_from_thread): Likewise.
2131 (store_gregs_to_thread): Likewise.
2132 (fetch_fpregs_from_thread): Likewise.
2133 (store_fpregs_to_thread): Likewise.
2134 (aarch64_linux_get_debug_reg_capacity): Likewise.
2135 * arm-linux-nat.c (get_thread_id): Remove.
2136 (GET_THREAD_ID): Update macro to use ptid_get_lwp.
2137 * xtensa-linux-nat.c (get_thread_id): Remove.
2138 (GET_THREAD_ID): Update macro to use ptid_get_lwp.
2139 * arm-linux-nat.c (get_thread_id): Remove.
2140 (GET_THREAD_ID): Remove.
2141 (fetch_fpregs): Call ptid_get_lwp instead of GET_THREAD_ID.
2142 (store_fpregs, fetch_regs, store_regs): Likewise.
2143 (fetch_wmmx_regs, store_wmmx_regs): Likewise.
2144 (fetch_vfp_regs, store_vfp_regs): Likewise.
2145 (arm_linux_read_description): Likewise.
2146 (arm_linux_get_hwbp_cap): Likewise.
2147 * xtensa-linux-nat.c (get_thread_id): Remove.
2148 (GET_THREAD_ID): Remove.
2149 (fetch_gregs, store_gregs): Call ptid_get_lwp instead of
2152 2015-08-04 Ciro Santilli <ciro.santilli@gmail.com> (obvious patch)
2154 * python/py-linetable.c: Fix case of Linetable to LineTable
2155 in docstrings and code comments.
2156 * python/py-symtab.c: Same.
2158 2015-08-04 Jan Kratochvil <jan.kratochvil@redhat.com>
2160 * infcmd.c (signal_command): Call do_cleanups for args_chain.
2162 2015-08-04 Jan Kratochvil <jan.kratochvil@redhat.com>
2165 * infcmd.c (attach_command): Move ARGS_CHAIN cleanup after last ARGS
2168 2015-08-04 Pedro Alves <palves@redhat.com>
2170 * nat/gdb_thread_db.h (td_init_ftype, td_ta_new_ftype)
2171 (td_ta_map_lwp2thr_ftype, td_ta_thr_iter_ftype)
2172 (td_ta_event_addr_ftype, td_ta_set_event_ftype)
2173 (td_ta_clear_event_ftype, td_ta_event_getmsg_ftype)
2174 (td_thr_validate_ftype, td_thr_get_info_ftype)
2175 (td_thr_event_enable_ftype, td_thr_tls_get_addr_ftype)
2176 (td_thr_tlsbase_ftype, td_symbol_list_ftype, td_ta_delete_ftype):
2178 * linux-thread-db.c (struct thread_db_info): Use new typedefs.
2179 (try_thread_db_load_1): Define TDB_VERBOSE_DLSYM, TDB_DLSYM , CHK
2180 local macros and use them instead of verbose_dlsym and dlsym
2183 2015-08-03 Sandra Loosemore <sandra@codesourcery.com>
2185 * nios2-tdep.h: Include opcode/nios2.h here.
2186 (NIOS2_CDX_OPCODE_SIZE): New.
2187 (struct gdbarch_tdep): Add OP parameter to syscall_next_pc.
2188 * nios2-tdep.c: Don't include opcode/nios2.h here.
2189 (nios2_fetch_insn): For R2, try reading 2-byte instruction if
2191 (nios2_match_add, nios2_match_sub): Add cases for R2 encodings.
2192 (nios2_match_addi, nios2_match_orhi): Likewise.
2193 (nios2_match_stw, nios2_match_ldw): Likewise.
2194 (nios2_match_rdctl): Likewise.
2195 (nios2_match_stwm, nios2_match_ldwm): New.
2196 (nios2_match_branch): Add cases for R2 encodings.
2197 (nios2_match_jmpi, nios2_match_calli): Likewise.
2198 (nios2_match_jmpr, nios2_match_callr): Likewise.
2199 (nios2_match_break, nios2_match_trap): Likewise.
2200 (nios2_in_epilogue_p): Add R2 support.
2201 (nios2_analyze_prologue): Update comments. Recognize R2 CDX
2203 (nios2_breakpoint_from_pc): Handle R2 instructions.
2204 (nios2_get_next_pc): Likewise. Adjust call to
2205 tdep->syscall_next_pc.
2206 * nios2-linux-tdep.c (nios2_r1_linux_rt_sigreturn_tramp_frame):
2207 Renamed from nios2_linux_rt_sigreturn_tramp_frame. Use
2208 instruction field macros instead of literal hex values.
2209 (nios2_r2_linux_rt_sigreturn_tramp_frame): New.
2210 (nios2_linux_syscall_next_pc): Adjust signature to pass OP.
2211 Use size field from OP instead of assuming all instructions
2213 (nios2_linux_init_abi): Register appropriate unwinder for mach.
2215 2015-08-03 Ulrich Weigand <uweigand@de.ibm.com>
2217 * cp-namespace.c (cp_lookup_symbol_via_imports): Fix uninitialized
2218 variable warning with some compilers.
2220 2015-08-03 Yao Qi <yao.qi@linaro.org>
2222 * arm-linux-nat.c (arm_linux_get_hwbp_type): Capitalize "type"
2223 in comment. Replace "rw" with "type".
2224 (arm_linux_remove_watchpoint): Change type of "rw" to
2225 "enum target_hw_bp_type".
2227 2015-08-02 Pierre-Marie de Rodat <derodat@adacore.com>
2229 * alpha-mdebug-tdep.c (find_proc_desc): Update call to
2231 * ft32-tdep.c (ft32_skip_prologue): Likewise.
2232 * moxie-tdep.c (moxie_skip_prologue): Likewise.
2233 * mt-tdep.c (mt_skip_prologue): Likewise.
2234 * xstormy16-tdep.c (xstormy16_skip_prologue): Likewise.
2236 2015-08-01 Pierre-Marie de Rodat <derodat@adacore.com>
2238 * ada-exp.y (write_object_renaming): Replace struct
2239 ada_symbol_info with struct block_symbol. Update field
2240 references accordingly.
2241 (block_lookup, select_possible_type_sym): Likewise.
2242 (find_primitive_type): Likewise. Also update call to
2243 ada_lookup_symbol to extract the symbol itself.
2244 (write_var_or_type, write_name_assoc): Likewise.
2245 * ada-lang.h (struct ada_symbol_info): Remove.
2246 (ada_lookup_symbol_list): Replace struct ada_symbol_info with
2247 struct block_symbol.
2248 (ada_lookup_encoded_symbol, user_select_syms): Likewise.
2249 (ada_lookup_symbol): Return struct block_symbol instead of a
2251 * ada-lang.c (defns_collected): Replace struct ada_symbol_info
2252 with struct block_symbol.
2253 (resolve_subexp, ada_resolve_function, sort_choices,
2254 user_select_syms, is_nonfunction, add_defn_to_vec,
2255 num_defns_collected, defns_collected,
2256 symbols_are_identical_enums, remove_extra_symbols,
2257 remove_irrelevant_renamings, add_lookup_symbol_list_worker,
2258 ada_lookup_symbol_list, ada_iterate_over_symbols,
2259 ada_lookup_encoded_symbol, get_var_value): Likewise.
2260 (ada_lookup_symbol): Return a block_symbol instead of a mere
2261 symbol. Replace struct ada_symbol_info with struct
2263 (ada_lookup_symbol_nonlocal): Likewise.
2264 (standard_lookup): Make block passing explicit through
2265 lookup_symbol_in_language.
2266 * ada-tasks.c (get_tcb_types_info): Update the calls to
2267 lookup_symbol_in_language to extract the mere symbol out of the
2269 (ada_tasks_inferior_data_sniffer): Likewise.
2270 * ax-gdb.c (gen_static_field): Likewise for the call to
2272 (gen_maybe_namespace_elt): Deal with struct block_symbol from
2274 (gen_expr): Likewise.
2275 * c-exp.y: Likewise. Remove uses of block_found.
2276 (lex_one_token, classify_inner_name, c_print_token): Likewise.
2277 (classify_name): Likewise. Rename the "sym" local variable to
2279 * c-valprint.c (print_unpacked_pointer): Likewise.
2280 * compile/compile-c-symbols.c (convert_symbol_sym): Promote the
2281 "sym" parameter from struct symbol * to struct block_symbol.
2282 Use it to remove uses of block_found. Deal with struct
2283 block_symbol from lookup functions.
2284 (gcc_convert_symbol): Likewise. Update the call to
2286 * compile/compile-object-load.c (compile_object_load): Deal with
2287 struct block_symbol from lookup functions.
2288 * cp-namespace.c (cp_lookup_nested_symbol_1,
2289 cp_lookup_nested_symbol, cp_lookup_bare_symbol,
2290 cp_search_static_and_baseclasses,
2291 cp_lookup_symbol_in_namespace, cp_lookup_symbol_via_imports,
2292 cp_lookup_symbol_imports_or_template,
2293 cp_lookup_symbol_via_all_imports, cp_lookup_symbol_namespace,
2294 lookup_namespace_scope, cp_lookup_nonlocal,
2295 find_symbol_in_baseclass): Return struct block_symbol instead of
2296 mere symbols and deal with struct block_symbol from lookup
2298 * cp-support.c (inspect_type, replace_typedefs,
2299 cp_lookup_rtti_type): Deal with struct block_symbol from
2301 * cp-support.h (cp_lookup_symbol_nonlocal,
2302 cp_lookup_symbol_from_namespace,
2303 cp_lookup_symbol_imports_or_template, cp_lookup_nested_symbol):
2304 Return struct block_symbol instead of mere symbols.
2305 * d-exp.y (d_type_from_name, d_module_from_name, push_variable,
2307 Deal with struct block_symbol from lookup functions. Remove
2308 uses of block_found.
2309 * eval.c (evaluate_subexp_standard): Update call to
2310 cp_lookup_symbol_namespace.
2311 * f-exp.y: Deal with struct block_symbol from lookup functions.
2312 Remove uses of block_found.
2314 * gdbtypes.c (lookup_typename, lookup_struct, lookup_union,
2315 lookup_enum, lookup_template_type, check_typedef): Deal with
2316 struct block_symbol from lookup functions.
2317 * guile/scm-frame.c (gdbscm_frame_read_var): Likewise.
2318 * guile/scm-symbol.c (gdbscm_lookup_symbol): Likewise.
2319 (gdbscm_lookup_global_symbol): Likewise.
2320 * gnu-v3-abi.c (gnuv3_get_typeid_type): Likewise.
2321 * go-exp.y: Likewise. Remove uses of block_found.
2322 (package_name_p, classify_packaged_name, classify_name):
2324 * infrun.c (insert_exception_resume_breakpoint): Likewise.
2325 * jv-exp.y (push_variable): Likewise.
2326 * jv-lang.c (java_lookup_class, get_java_object_type): Likewise.
2327 * language.c (language_bool_type): Likewise.
2328 * language.h (struct language_defn): Update
2329 la_lookup_symbol_nonlocal to return a struct block_symbol rather
2331 * linespec.c (find_label_symbols): Deal with struct block_symbol
2332 from lookup functions.
2333 * m2-exp.y: Likewise. Remove uses of block_found.
2335 * mi/mi-cmd-stack.c (list_args_or_locals): Likewise.
2336 * objc-lang.c (lookup_struct_typedef, find_imps): Likewise.
2337 * p-exp.y: Likewise. Remove uses of block_found.
2339 * p-valprint.c (pascal_val_print): Likewise.
2340 * parse.c (write_dollar_variable): Likewise. Remove uses of
2342 * parser-defs.h (struct symtoken): Turn the SYM field into a
2343 struct block_symbol.
2344 * printcmd.c (address_info): Deal with struct block_symbol from
2346 * python/py-frame.c (frapy_read_var): Likewise.
2347 * python/py-symbol.c (gdbpy_lookup_symbol,
2348 gdbpy_lookup_global_symbol): Likewise.
2349 * skip.c (skip_function_command): Likewise.
2350 * solib-darwin.c (darwin_lookup_lib_symbol): Return a struct
2351 block_symbol instead of a mere symbol.
2352 * solib-spu.c (spu_lookup_lib_symbol): Likewise.
2353 * solib-svr4.c (elf_lookup_lib_symbol): Likewise.
2354 * solib.c (solib_global_lookup): Likewise.
2355 * solist.h (solib_global_lookup): Likewise.
2356 (struct target_so_ops): Update lookup_lib_global_symbol to
2357 return a struct block_symbol rather than a mere symbol.
2358 * source.c (select_source_symtab): Deal with struct block_symbol
2359 from lookup functions.
2360 * stack.c (print_frame_args, iterate_over_block_arg_vars):
2362 * symfile.c (set_initial_language): Likewise.
2363 * symtab.c (SYMBOL_LOOKUP_FAILED): Turn into a struct
2365 (SYMBOL_LOOKUP_FAILED_P): New predicate as a macro.
2366 (struct symbol_cache_slot): Turn the FOUND field into a struct
2368 (block_found): Remove.
2369 (eq_symbol_entry): Update to deal with struct block_symbol in
2371 (symbol_cache_lookup): Return a struct block_symbol rather than
2373 (symbol_cache_mark_found): Add a BLOCK parameter to fill
2374 appropriately the cache slots. Update callers.
2375 (symbol_cache_dump): Update cache slots handling to the type
2377 (lookup_symbol_in_language, lookup_symbol, lookup_language_this,
2378 lookup_symbol_aux, lookup_local_symbol,
2379 lookup_symbol_in_objfile, lookup_global_symbol_from_objfile,
2380 lookup_symbol_in_objfile_symtabs,
2381 lookup_symbol_in_objfile_from_linkage_name,
2382 lookup_symbol_via_quick_fns, basic_lookup_symbol_nonlocal,
2383 lookup_symbol_in_static_block, lookup_static_symbol,
2384 lookup_global_symbol):
2385 Return a struct block_symbol rather than a mere symbol. Deal
2386 with struct block_symbol from other lookup functions. Remove
2387 uses of block_found.
2388 (lookup_symbol_in_block): Remove uses of block_found.
2389 (struct global_sym_lookup_data): Turn the RESULT field into a
2390 struct block_symbol.
2391 (lookup_symbol_global_iterator_cb): Update references to the
2393 (search_symbols): Deal with struct block_symbol from lookup
2395 * symtab.h (struct block_symbol): New structure.
2396 (block_found): Remove.
2397 (lookup_symbol_in_language, lookup_symbol,
2398 basic_lookup_symbol_nonlocal, lookup_symbol_in_static_block,
2399 lookup_static_symbol, lookup_global_symbol, lookup_language_this,
2400 lookup_global_symbol_from_objfile): Return a struct block_symbol
2401 rather than just a mere symbol. Update comments to remove
2402 mentions of block_found.
2403 * valops.c (find_function_in_inferior,
2404 value_struct_elt_for_reference, value_maybe_namespace_elt,
2405 value_of_this): Deal with struct block_symbol from lookup
2407 * value.c (value_static_field, value_fn_field): Likewise.
2409 2015-07-31 Simon Marchi <simon.marchi@ericsson.com>
2411 * remote-m32r-sdi.c (m32r_remove_watchpoint): Use enum type
2414 2015-07-31 Simon Marchi <simon.marchi@ericsson.com>
2415 Pedro Alves <palves@redhat.com>
2417 * aarch64-linux-nat.c (aarch64_linux_can_use_hw_breakpoint): Use enum
2418 type or value instead of integer.
2419 (aarch64_linux_insert_watchpoint): Likewise.
2420 (aarch64_linux_remove_watchpoint): Likewise.
2421 * ada-lang.c (ada_op_print_tab): Likewise.
2422 * amd64-linux-tdep.c (amd64_canonicalize_syscall): Likewise.
2423 (amd64_linux_syscall_record_common): Likewise.
2424 * arch-utils.c (target_byte_order_user): Likewise.
2425 (default_byte_order): Likewise.
2426 * arm-linux-nat.c (arm_linux_can_use_hw_breakpoint): Likewise.
2427 (arm_linux_get_hwbp_type): Likewise.
2428 (arm_linux_hw_watchpoint_initialize): Likewise.
2429 (arm_linux_insert_watchpoint): Likewise.
2430 * arm-linux-tdep.c (arm_canonicalize_syscall): Likewise.
2431 (arm_linux_syscall_record): Likewise.
2432 * breakpoint.c (update_watchpoint): Likewise.
2433 (breakpoint_here_p): Likewise.
2434 (bpstat_print): Likewise.
2435 (enable_breakpoint_disp): Likewise.
2436 * c-lang.c (c_op_print_tab): Likewise.
2437 * cli/cli-decode.c (add_info_alias): Likewise.
2438 * d-lang.c (d_op_print_tab): Likewise.
2439 * eval.c (evaluate_subexp_standard): Likewise.
2440 * f-exp.y (dot_ops): Likewise.
2441 (f77_keywords): Likewise.
2442 * f-lang.c (f_op_print_tab): Likewise.
2443 * go-lang.c (go_op_print_tab): Likewise.
2444 * guile/scm-breakpoint.c (gdbscm_make_breakpoint): Likewise.
2445 * guile/scm-cmd.c (gdbscm_make_command): Likewise.
2446 * guile/scm-param.c (gdbscm_make_parameter): Likewise.
2447 * guile/scm-pretty-print.c (gdbscm_apply_val_pretty_printer): Likewise.
2448 * guile/scm-string.c (struct scm_to_stringn_data): Likewise.
2449 (struct scm_from_stringn_data): Likewise.
2450 * i386-linux-tdep.c (i386_canonicalize_syscall): Likewise.
2451 * ia64-linux-nat.c (ia64_linux_insert_watchpoint): Likewise.
2452 (ia64_linux_remove_watchpoint): Likewise.
2453 (ia64_linux_can_use_hw_breakpoint): Likewise.
2454 * infrun.c (print_stop_event): Likewise.
2455 * jv-lang.c (java_op_print_tab): Likewise.
2456 * linux-nat.c (linux_proc_xfer_partial): Likewise.
2457 * linux-nat.h (struct lwp_info): Likewise.
2458 * linux-thread-db.c (enable_thread_event): Likewise.
2459 * m2-lang.c (m2_op_print_tab): Likewise.
2460 * mi/mi-cmd-stack.c (mi_cmd_stack_list_locals): Likewise.
2461 (mi_cmd_stack_list_variables): Likewise.
2462 * mi/mi-main.c (mi_cmd_trace_frame_collected): Likewise.
2463 * mi/mi-out.c (mi_table_begin): Likewise.
2464 (mi_table_header): Likewise.
2465 * mips-linux-nat.c (mips_linux_can_use_hw_breakpoint): Likewise.
2466 (mips_linux_insert_watchpoint): Likewise.
2467 (mips_linux_remove_watchpoint): Likewise.
2468 * nat/mips-linux-watch.c (mips_linux_watch_type_to_irw): Likewise.
2469 * nat/mips-linux-watch.h (struct mips_watchpoint): Likewise.
2470 (mips_linux_watch_type_to_irw): Likewise.
2471 * nto-procfs.c (procfs_can_use_hw_breakpoint): Likewise.
2472 (procfs_insert_hw_watchpoint): Likewise.
2473 (procfs_remove_hw_watchpoint): Likewise.
2474 (procfs_hw_watchpoint): Likewise.
2475 (procfs_can_use_hw_breakpoint): Likewise.
2476 (procfs_remove_hw_watchpoint): Likewise.
2477 (procfs_insert_hw_watchpoint): Likewise.
2478 * p-lang.c (pascal_op_print_tab): Likewise.
2479 * ppc-linux-nat.c (ppc_linux_can_use_hw_breakpoint): Likewise.
2480 * ppc-linux-tdep.c (ppu2spu_unwind_register): Likewise.
2481 * ppc-sysv-tdep.c (get_decimal_float_return_value): Likewise.
2482 * procfs.c (procfs_can_use_hw_breakpoint): Likewise.
2483 (procfs_insert_watchpoint): Likewise.
2484 (procfs_remove_watchpoint): Likewise.
2485 * psymtab.c (recursively_search_psymtabs): Likewise.
2486 * remote-m32r-sdi.c (m32r_can_use_hw_watchpoint): Likewise.
2487 (m32r_insert_watchpoint): Likewise.
2488 * remote-mips.c (mips_can_use_watchpoint): Likewise.
2489 (mips_insert_watchpoint): Likewise.
2490 (mips_remove_watchpoint): Likewise.
2491 * remote.c (watchpoint_to_Z_packet): Likewise.
2492 (remote_insert_watchpoint): Likewise.
2493 (remote_remove_watchpoint): Likewise.
2494 (remote_check_watch_resources): Likewise.
2495 * s390-linux-nat.c (s390_insert_watchpoint): Likewise.
2496 (s390_remove_watchpoint): Likewise.
2497 (s390_can_use_hw_breakpoint): Likewise.
2498 * s390-linux-tdep.c (s390_gdbarch_init): Likewise.
2499 * spu-linux-nat.c (spu_can_use_hw_breakpoint): Likewise.
2500 * target.h (struct target_ops): Likewise.
2501 * tilegx-tdep.c (tilegx_analyze_prologue): Likewise.
2502 * ui-out.c (struct ui_out_hdr): Likewise.
2503 (append_header_to_list): Likewise.
2504 (get_next_header): Likewise.
2505 (verify_field): Likewise.
2506 (ui_out_begin): Likewise.
2507 (ui_out_field_int): Likewise.
2508 (ui_out_field_fmt_int): Likewise.
2509 (ui_out_field_skip): Likewise.
2510 (ui_out_field_string): Likewise.
2511 (ui_out_field_fmt): Likewise.
2512 * varobj.c (new_variable): Likewise.
2513 * x86-nat.c (x86_insert_watchpoint): Likewise.
2514 (x86_remove_watchpoint): Likewise.
2515 (x86_can_use_hw_breakpoint): Likewise.
2516 * xtensa-tdep.h (struct gdbarch_tdep): Likewise.
2517 * inflow.c (enum gdb_has_a_terminal_flag_enum): Add name to
2518 previously anonymous enumeration type..
2519 * linux-record.h (enum gdb_syscall): Add gdb_sys_no_syscall
2521 * target-debug.h (target_debug_print_enum_target_hw_bp_type): New.
2522 (target_debug_print_enum_bptype): New.
2523 * target-delegates.c: Regenerate.
2525 2015-07-30 Sandra Loosemore <sandra@codesourcery.com>
2527 * nios2-tdep.c (nios2_analyze_prologue): Do what the comment
2528 already says and disallow non-stack memory writes in the prologue.
2530 2015-07-30 Sandra Loosemore <sandra@codesourcery.com>
2532 * nios2-tdep.c (nios2_analyze_prologue): Update comments to
2533 reflect how current GCC emits stack overflow checks. Match
2534 both trap and break instructions for backward compatbility.
2535 Disallow other trap and break instructions in the prologue.
2537 2015-07-30 Pedro Alves <palves@redhat.com>
2540 * linux-nat.c (wait_lwp): Report to the core when thread group
2543 2015-07-30 Pedro Alves <palves@redhat.com>
2544 Simon Marchi <simon.marchi@ericsson.com>
2547 * linux-nat.c (linux_handle_extended_wait): On CLONE event, always
2548 mark the new thread as resumed. Remove STOPPING parameter.
2549 (wait_lwp): Adjust call to linux_handle_extended_wait.
2550 (linux_nat_filter_event): Adjust call to
2551 linux_handle_extended_wait.
2552 (resume_stopped_resumed_lwps): Add debug output.
2554 2015-07-30 Pierre Langlois <pierre.langlois@arm.com>
2556 * arch-utils.c (default_fast_tracepoint_valid_at): Remove unused
2558 * arch-utils.h (default_fast_tracepoint_valid_at): Likewise.
2559 * breakpoint.c (check_fast_tracepoint_sals): Adjust call to
2560 gdbarch_fast_tracepoint_valid_at.
2561 * gdbarch.sh (fast_tracepoint_valid_at): Remove isize argument.
2562 * gdbarch.h: Regenerate.
2563 * gdbarch.c: Regenerate.
2564 * i386-tdep.c (i386_fast_tracepoint_valid_at): Remove isize
2565 argument. Do not set it.
2566 * remote.c (remote_download_tracepoint): Adjust call to
2567 gdbarch_fast_tracepoint_valid_at. Call gdb_insn_length to get
2568 the instruction length.
2570 2015-07-30 Yao Qi <yao.qi@linaro.org>
2572 * arm-tdep.h (enum gdb_regnum): Move it to ...
2573 * arch/arm.h: ... here. New file.
2574 * Makefile.in (HFILES_NO_SRCDIR): Add arch/arm.h.
2576 2015-07-30 Pierre Langlois <pierre.langlois@arm.com>
2578 * aarch64-tdep.c (decode_b): Rename link argument to is_bl.
2579 Change its type to int *.
2580 (decode_br): Rename link argument to is_blr. Change its type to
2582 (decode_cb): Rename op argument to is_cbnz. Change its type to
2584 (decode_tb): Rename op argument to is_tbnz. Change its type to
2585 int *. Set is_tbnz to either 1 or 0.
2586 (aarch64_analyze_prologue): Change type of is_link to int. Add
2587 new variables is_cbnz and is_tbnz. Adjust call to
2588 aarch64_decode_cb and aarch64_decode_tb.
2590 2015-07-29 Simon Marchi <simon.marchi@ericsson.com>
2592 * mips-linux-nat.c (write_watchpoint_regs): Add NULL as ptrace's 4th
2594 (mips_linux_new_thread): Likewise.
2595 * nat/mips-linux-watch.c (mips_linux_read_watch_registers): Likewise.
2597 2015-07-29 Patrick Palka <patrick@parcs.ath.cx>
2599 * top.c: Include "tui/tui.h".
2600 (undo_terminal_modifications_before_exit): New static function.
2601 (quit_force): Use it.
2603 2015-07-29 Patrick Palka <patrick@parcs.ath.cx>
2605 * target.c (terminal_state): Initialize to terminal_is_ours.
2607 2015-07-29 Yao Qi <yao.qi@linaro.org>
2610 * dcache.c (dcache_read_memory_partial): Call
2611 raw_memory_xfer_partial.
2612 * target.c (raw_memory_xfer_partial): Make it non-static.
2613 * target.h (raw_memory_xfer_partial): Declare.
2615 2015-07-28 Simon Marchi <simon.marchi@ericsson.com>
2617 * c-valprint.c (c_val_print_array): Consider addressable memory
2619 (c_val_print_ptr): Likewise.
2620 (c_val_print_int): Likewise.
2621 * findvar.c (read_frame_register_value): Likewise.
2622 * valarith.c (find_size_for_pointer_math): Likewise.
2623 (value_ptrdiff): Likewise.
2624 (value_subscripted_rvalue): Likewise.
2625 * valops.c (read_value_memory): Likewise (and rename variables).
2626 (value_assign): Likewise.
2627 (value_repeat): Likewise.
2628 (value_array): Likewise.
2629 (value_slice): Likewise.
2630 * valprint.c (generic_val_print_ptr): Likewise.
2631 (generic_val_print_enum): Likewise.
2632 (generic_val_print_bool): Likewise.
2633 (generic_val_print_int): Likewise.
2634 (generic_val_print_char): Likewise.
2635 (generic_val_print_float): Likewise.
2636 (generic_val_print_decfloat): Likewise.
2637 (generic_val_print_complex): Likewise.
2638 (val_print_scalar_formatted): Likewise.
2639 (val_print_array_elements): Likewise.
2640 * value.c (set_value_parent): Likewise.
2641 (value_contents_copy_raw): Likewise.
2642 (set_internalvar_component): Likewise.
2643 (value_primitive_field): Likewise.
2644 (value_fetch_lazy): Likewise.
2645 * value.h (read_value_memory): Update comment.
2647 2015-07-28 Simon Marchi <simon.marchi@ericsson.com>
2649 * value.c (get_value_arch): New function.
2650 * value.h (get_value_arch): New declaration.
2652 2015-07-28 Simon Marchi <simon.marchi@ericsson.com>
2654 * value.c (struct value): Update comments.
2656 2015-07-28 Simon Marchi <simon.marchi@ericsson.com>
2658 * gdbtypes.c (type_length_units): New function.
2659 * gdbtypes.h (type_length_units): New declaration.
2660 (struct type) <length>: Update comment.
2662 2015-07-27 Simon Marchi <simon.marchi@ericsson.com>
2664 * valprint.c (generic_val_print): Factor out complex
2665 printing code to ...
2666 (generic_val_print_complex): ... this new function.
2668 2015-07-27 Simon Marchi <simon.marchi@ericsson.com>
2670 * valprint.c (generic_val_print): Factor out decfloat
2671 printing code to ...
2672 (generic_val_print_decfloat): ... this new function.
2674 2015-07-27 Simon Marchi <simon.marchi@ericsson.com>
2676 * valprint.c (generic_val_print): Factor out float
2677 printing code to ...
2678 (generic_val_print_float): ... this new function.
2680 2015-07-27 Simon Marchi <simon.marchi@ericsson.com>
2682 * valprint.c (generic_val_print): Factor out char
2683 printing code to ...
2684 (generic_val_print_char): ... this new function.
2686 2015-07-27 Simon Marchi <simon.marchi@ericsson.com>
2688 * valprint.c (generic_val_print): Factor out integer
2689 printing code to ...
2690 (generic_val_print_int): ... this new function.
2692 2015-07-27 Simon Marchi <simon.marchi@ericsson.com>
2694 * valprint.c (generic_val_print): Factor out bool
2695 printing code to ...
2696 (generic_val_print_bool): ... this new function.
2698 2015-07-27 Simon Marchi <simon.marchi@ericsson.com>
2700 * valprint.c (generic_val_print): Factor out function/method
2701 printing code to ...
2702 (generic_val_print_func): ... this new function.
2704 2015-07-27 Simon Marchi <simon.marchi@ericsson.com>
2706 * valprint.c (generic_val_print): Factor out flags
2707 printing code to ...
2708 (generic_val_print_flags): ... this new function.
2710 2015-07-27 Simon Marchi <simon.marchi@ericsson.com>
2712 * valprint.c (generic_val_print): Factor out enum
2713 printing code to ...
2714 (generic_val_print_enum): ... this new function.
2716 2015-07-27 Simon Marchi <simon.marchi@ericsson.com>
2718 * valprint.c (generic_val_print): Factor out reference
2719 printing code to ...
2720 (generic_val_print_ref): ... this new function.
2722 2015-07-27 Simon Marchi <simon.marchi@ericsson.com>
2724 * valprint.c (generic_val_print): Factor out memberptr
2725 printing code to ...
2726 (generic_val_print_memberptr): ... this new function.
2728 2015-07-27 Simon Marchi <simon.marchi@ericsson.com>
2730 * valprint.c (generic_val_print): Factor out pointer
2731 printing code to ...
2732 (generic_val_print_ptr): ... this new function.
2734 2015-07-27 Simon Marchi <simon.marchi@ericsson.com>
2736 * valprint.c (generic_val_print): Factor out array
2737 printing code to ...
2738 (generic_val_print_array): ... this new function.
2740 2015-07-27 Simon Marchi <simon.marchi@ericsson.com>
2742 * valprint.c (generic_val_print): Factor out
2743 print_unpacked_pointer code to ...
2744 (print_unpacked_pointer): ... this new function.
2746 2015-07-27 Patrick Palka <patrick@parcs.ath.cx>
2748 * event-top.c (handle_sigterm): Don't inspect
2749 target_can_async_p. Always set the quit flag and always mark
2750 the async signal handler.
2752 2015-07-27 Yao Qi <yao.qi@linaro.org>
2754 * Makefile.in (REMOTE_EXAMPLES): Remove it.
2756 2015-07-25 Kevin Buettner <kevinb@redhat.com>
2758 * remote.c (read_ptid): Return null_ptid when no thread id
2760 (remote_current_thread): Add log warning for malformed
2762 (remote_start_remote): Add log warning when current thread
2765 2015-07-24 Pedro Alves <palves@redhat.com>
2767 * s390-linux-nat.c (fetch_regs, store_regs, fetch_fpregs)
2768 (s390_stopped_by_watchpoint, s390_prepare_to_resume): Pass 0 as
2769 forth argument to ptrace PTRACE_PEEKUSR_AREA/PTRACE_POKEUSR_AREA.
2771 2015-07-24 Pedro Alves <palves@redhat.com>
2774 * linux-nat.c (linux_nat_filter_event): Don't assert that the lwp
2775 is resumed, and extend the debug log.
2777 2015-07-24 Pedro Alves <palves@redhat.com>
2779 * fork-child.c (fork_inferior): Print argv[0] instead of exec_file.
2781 2015-07-24 Pedro Alves <palves@redhat.com>
2783 * aarch64-linux-nat.c: Include nat/gdb_ptrace.h instead of
2785 * alpha-linux-nat.c: Likewise.
2786 * amd64-linux-nat.c: Likewise.
2787 * arm-linux-nat.c: Likewise.
2788 * hppa-linux-nat.c: Likewise.
2789 * i386-linux-nat.c: Likewise.
2790 * ia64-linux-nat.c: Likewise.
2791 * linux-fork.c: Likewise.
2792 * linux-nat.c: Likewise.
2793 * m32r-linux-nat.c: Likewise.
2794 * m68klinux-nat.c: Likewise.
2795 * mips-linux-nat.c: Likewise.
2796 * nat/linux-btrace.c: Likewise.
2797 * nat/linux-ptrace.c: Likewise.
2798 * nat/linux-ptrace.h
2799 * nat/mips-linux-watch.c: Likewise.
2800 * nat/x86-linux-dregs.c: Likewise.
2801 * ppc-linux-nat.c: Likewise.
2802 * s390-linux-nat.c: Likewise.
2803 * spu-linux-nat.c: Likewise.
2804 * tilegx-linux-nat.c: Likewise.
2805 * x86-linux-nat.c: Likewise.
2806 * xtensa-linux-nat.c: Likewise.
2808 2015-07-24 Pedro Alves <palves@redhat.com>
2810 * ptrace.m4 (ptrace tests): Test in C++ mode. Try with 'enum
2811 __ptrace_request as first parameter type instead of int.
2812 (PTRACE_TYPE_ARG1): Define.
2813 * nat/gdb_ptrace.h [!PTRACE_TYPE_ARG5] (ptrace): Define as wrapper
2814 that casts first argument to PTRACE_TYPE_ARG1.
2815 * config.in: Regenerate.
2816 * configure: Regenerate.
2818 2015-07-24 Pedro Alves <palves@redhat.com>
2820 * gdb_ptrace.h: Move ...
2821 * nat/gdb_ptrace.h: ... here.
2822 * inf-ptrace.c: Adjust.
2824 2015-07-24 Pedro Alves <palves@redhat.com>
2826 * acinclude.m4: Include ptrace.m4.
2827 * configure.ac: Call GDB_AC_PTRACE and move ptrace checks ...
2828 * ptrace.m4: ... to this new file.
2830 2015-07-23 Doug Evans <dje@google.com>
2832 * dwarf2read.c (dwarf2_per_cu_data): Add comment.
2833 (load_cu): Handle dummy CUs.
2834 (dw2_do_instantiate_symtab, process_queuef): Ditto.
2835 (dwarf2_fetch_die_loc_sect_off, dwarf2_fetch_constant_bytes): Ditto.
2837 2015-07-23 Ciro Santilli <ciro.santilli@gmail.com> (tiny patch)
2839 * py-linetable.c (ltpy_get_all_source_lines): Adjust function
2840 documentation to say that it returns a list rather than
2842 (linetable_object_methods): Update the docstring of the
2843 "source_line" entry.
2845 2015-07-23 Pierre-Marie de Rodat <derodat@adacore.com>
2847 * gdbtypes.c (resolve_dynamic_array): Pass the peeled element
2848 type to the recursive call instead of the original (maybe
2849 TYPE_CODE_TYPEDEF) type.
2851 2015-07-23 Yao Qi <yao.qi@linaro.org>
2853 * aarch64-linux-nat.c (aarch64_linux_can_use_hw_breakpoint): If
2854 TYPE is watchpoint, return zero if aarch64_num_wp_regs is zero.
2855 If TYPE is breakpoint, return zero if arch64_num_bp_regs is zero.
2857 2015-07-21 Yao Qi <yao.qi@linaro.org>
2859 * aarch64-linux-nat.c (aarch64_linux_get_debug_reg_capacity):
2860 Move it to nat/aarch64-linux-hw-point.c.
2861 (aarch64_linux_child_post_startup_inferior): Update.
2862 * nat/aarch64-linux-hw-point.c (aarch64_linux_get_debug_reg_capacity):
2864 * nat/aarch64-linux-hw-point.h (aarch64_linux_get_debug_reg_capacity):
2867 2015-07-21 Markus Metzger <markus.t.metzger@intel.com>
2869 * common/btrace-common.c (btrace_data_append): Change case label.
2871 2015-07-20 Yao Qi <yao.qi@linaro.org>
2873 * nat/aarch64-linux-hw-point.c (aarch64_handle_unaligned_watchpoint):
2875 * nat/aarch64-linux-hw-point.h: Use ULONGEST rather than
2876 "unsigned long long".
2878 2015-07-18 Kevin Buettner <kevinb@redhat.com>
2880 * dwarf2read.c (dwarf2_locate_sections): Allow has_section_at_zero
2881 to be set for SEC_ALLOC sections too.
2883 2015-07-17 Yao Qi <yao.qi@linaro.org>
2885 * Makefile.in (HFILES_NO_SRCDIR): Add
2886 nat/aarch64-linux-hw-point.h.
2887 (aarch64-linux-hw-point.o): New rule.
2888 * nat/aarch64-linux-hw-point.h: New file.
2889 * nat/aarch64-linux-hw-point.c: New file.
2890 * aarch64-linux-nat.c: Include nat/aarch64-linux-hw-point.h.
2891 (AARCH64_HBP_MAX_NUM): Move to nat/aarch64-linux-hw-point.h.
2892 (AARCH64_HWP_MAX_NUM, AARCH64_HBP_ALIGNMENT): Likewise.
2893 (AARCH64_HWP_ALIGNMENT): Likewise.
2894 (AARCH64_HWP_MAX_LEN_PER_REG): Likewise.
2895 (AARCH64_DEBUG_NUM_SLOTS, AARCH64_DEBUG_ARCH): Likewise.
2896 (AARCH64_DEBUG_ARCH_V8, DR_MARK_ALL_CHANGED): Likewise.
2897 (DR_MARK_N_CHANGED, DR_CLEAR_CHANGED): Likewise.
2898 (DR_HAS_CHANGED, DR_N_HAS_CHANGE): Likewise.
2899 (aarch64_num_bp_regs, aarch64_num_wp_regs): Likewise.
2900 (struct aarch64_debug_reg_state): Likewise.
2901 (struct arch_lwp_info): Likewise.
2902 (aarch64_linux_set_debug_regs): Likewise.
2903 (aarch64_notify_debug_reg_change): Remove static.
2904 (aarch64_align_watchpoint): Likewise.
2905 (DR_CONTROL_ENABLED, DR_CONTROL_LENGTH): Likewise.
2906 (aarch64_watchpoint_length): Likewise.
2907 (aarch64_point_encode_ctrl_reg): Likewise
2908 (aarch64_point_is_aligned): Likewise.
2909 (aarch64_dr_state_insert_one_point): Likewise.
2910 (aarch64_dr_state_remove_one_point): Likewise.
2911 (aarch64_handle_breakpoint): Likewise.
2912 (aarch64_handle_aligned_watchpoint): Likewise.
2913 (aarch64_handle_unaligned_watchpoint): Likewise.
2914 (aarch64_handle_watchpoint): Likewise.
2915 * config/aarch64/linux.mh (NAT_FILE): Add
2916 aarch64-linux-hw-point.o.
2918 2015-07-17 Yao Qi <yao.qi@linaro.org>
2920 * aarch64-linux-nat.c (aarch64_handle_breakpoint): Add argument
2921 state and don't call aarch64_get_debug_reg_state. All callers
2923 (aarch64_linux_insert_hw_breakpoint): Call
2924 aarch64_get_debug_reg_state earlier.
2925 (aarch64_linux_remove_hw_breakpoint): Likewise.
2926 (aarch64_handle_aligned_watchpoint): Add argument state and
2927 don't call aarch64_get_debug_reg_state. All callers update.
2928 (aarch64_handle_unaligned_watchpoint): Likewise.
2929 (aarch64_handle_watchpoint): Add argument state.
2930 (aarch64_linux_insert_watchpoint): Call aarch64_get_debug_reg_state
2932 (aarch64_linux_remove_watchpoint): Likewise.
2934 2015-07-17 Yao Qi <yao.qi@linaro.org>
2936 * aarch64-linux-nat.c (aarch64_show_debug_reg_state): Use
2938 (aarch64_handle_unaligned_watchpoint): Likewise.
2940 2015-07-17 Yao Qi <yao.qi@linaro.org>
2942 * aarch64-linux-nat.c (aarch64_dr_state_insert_one_point): Change
2943 argument type's type to 'enum target_hw_bp_type'.
2944 (aarch64_dr_state_remove_one_point): Likewise.
2945 (aarch64_handle_breakpoint): Likewise.
2946 (aarch64_linux_insert_hw_breakpoint): Likewise.
2947 (aarch64_linux_remove_hw_breakpoint): Likewise.
2948 (aarch64_handle_aligned_watchpoint): Likewise.
2950 2015-07-17 Yao Qi <yao.qi@linaro.org>
2952 * aarch64-linux-nat.c (aarch64_linux_get_debug_reg_capacity): Call
2953 ptid_get_pid instead of get_thread_id.
2955 2015-07-17 Yao Qi <yao.qi@linaro.org>
2957 * remote.c (get_current_thread): Initialise ptid to null_ptid.
2958 (add_current_inferior_and_thread): Don't initialise ptid.
2960 2015-07-16 Pierre Langlois <pierre.langlois@arm.com>
2962 * aarch64-tdep.c (aarch64_pseudo_read_value): Mark S register as
2963 unavailable if invalid.
2965 2015-07-15 Jan Kratochvil <jan.kratochvil@redhat.com>
2967 Revert the previous 6 commits:
2968 Create empty nat/linux-maps.[ch] and common/target-utils.[ch].
2969 Move gdb_regex* to common/
2970 Prepare linux_find_memory_regions_full & co. for move
2971 Move linux_find_memory_regions_full & co.
2972 gdbserver build-id attribute generator
2973 Validate symbol file using build-id
2975 2015-07-15 Aleksandar Ristovski <aristovski@qnx.com
2976 Jan Kratochvil <jan.kratochvil@redhat.com>
2978 Validate symbol file using build-id.
2979 * NEWS (Changes since GDB 7.10): Add 'set validate-build-id'
2980 and 'show validate-build-id'. Add build-id attribute.
2981 * solib-darwin.c (_initialize_darwin_solib): Assign validate value.
2982 * solib-dsbt.c (_initialize_dsbt_solib): Ditto.
2983 * solib-frv.c (_initialize_frv_solib): Ditto.
2984 * solib-spu.c (set_spu_solib_ops): Ditto.
2985 * solib-svr4.c: Include rsp-low.h.
2986 (NOTE_GNU_BUILD_ID_NAME): New define.
2987 (svr4_validate): New function.
2988 (svr4_copy_library_list): Duplicate field build_id.
2989 (library_list_start_library): Parse 'build-id' attribute.
2990 (svr4_library_attributes): Add 'build-id' attribute.
2991 (_initialize_svr4_solib): Assign validate value.
2992 * solib-target.c (solib.h): Include.
2993 (_initialize_solib_target): Assign validate value.
2994 * solib.c (validate_build_id, show_validate_build_id): New.
2995 (solib_map_sections): Use ops->validate.
2996 (clear_so): Free build_id.
2997 (default_solib_validate): New function.
2998 (_initialize_solib): Add "validate-build-id".
2999 * solib.h (default_solib_validate): New declaration.
3000 * solist.h (struct so_list): New fields 'build_idsz' and 'build_id'.
3001 (target_so_ops): New field 'validate'.
3003 2015-07-15 Aleksandar Ristovski <aristovski@qnx.com
3004 Jan Kratochvil <jan.kratochvil@redhat.com>
3006 gdbserver build-id attribute generator.
3007 * features/library-list-svr4.dtd (library-list-svr4): New
3008 'build-id' attribute.
3010 2015-07-15 Aleksandar Ristovski <aristovski@qnx.com
3011 Jan Kratochvil <jan.kratochvil@redhat.com>
3013 Move linux_find_memory_regions_full & co.
3014 * linux-tdep.c (nat/linux-maps.h): Include.
3015 (gdb_regex.h): Remove the include.
3016 (enum filterflags, struct smaps_vmflags, read_mapping, decode_vmflags)
3017 (mapping_is_anonymous_p, dump_mapping_p): Moved to nat/linux-maps.c.
3018 (linux_find_memory_region_ftype): Moved typedef to nat/linux-maps.h.
3019 (linux_find_memory_regions_full): Moved definition to nat/linux-maps.c.
3020 * nat/linux-maps.c: Include ctype.h, target/target-utils.h, gdb_regex.h
3021 and target/target.h.
3022 (struct smaps_vmflags, read_mapping, decode_vmflags)
3023 (mapping_is_anonymous_p, dump_mapping_p): Move from linux-tdep.c.
3024 (linux_find_memory_regions_full): Move from linux-tdep.c.
3025 * nat/linux-maps.h (read_mapping): New declaration.
3026 (linux_find_memory_region_ftype, enum filterflags): Moved from
3028 (linux_find_memory_regions_full): New declaration.
3029 * target.c (target/target-utils.h): Include.
3030 (read_alloc_pread_ftype): Moved typedef to target/target-utils.h.
3031 (read_alloc, read_stralloc_func_ftype, read_stralloc): Moved
3032 definitions to target/target-utils.c.
3033 * target.h (target_fileio_read_stralloc): Move it to target/target.h.
3034 * target/target-utils.c (read_alloc, read_stralloc): Move definitions
3036 * target/target-utils.h (read_alloc_pread_ftype): New typedef.
3037 (read_alloc): New declaration.
3038 (read_stralloc_func_ftype): New typedef.
3039 (read_stralloc): New declaration.
3040 * target/target.h (target_fileio_read_stralloc): Move it from target.h.
3042 2015-07-15 Aleksandar Ristovski <aristovski@qnx.com
3043 Jan Kratochvil <jan.kratochvil@redhat.com>
3045 Prepare linux_find_memory_regions_full & co. for move.
3046 * linux-tdep.c (linux_find_memory_region_ftype): Comment.
3047 (linux_find_memory_regions_full): Change signature and prepare
3048 for moving to linux-maps.
3049 (linux_find_memory_regions_data): Rename field 'obfd' to 'data'.
3050 (linux_find_memory_regions_thunk): New.
3051 (linux_find_memory_regions_thunk): Use 'data' field instead of 'obfd'.
3052 (linux_find_memory_regions_gdb): New.
3053 (linux_find_memory_regions): Rename argument 'obfd' to 'func_data'.
3054 (linux_make_mappings_corefile_notes): Use
3055 linux_find_memory_regions_gdb.
3056 * target.c (read_alloc_pread_ftype): New typedef.
3057 (target_fileio_read_alloc_1_pread): New function.
3058 (read_alloc): Refactor from target_fileio_read_alloc_1.
3059 (read_stralloc_func_ftype): New typedef.
3060 (target_fileio_read_alloc_1): New implementation. Use read_alloc.
3061 (read_stralloc): Refactored from target_fileio_read_stralloc.
3062 (target_fileio_read_stralloc): New implementation, use read_stralloc.
3064 2015-07-15 Jan Kratochvil <jan.kratochvil@redhat.com>
3066 * Makefile.in (HFILES_NO_SRCDIR): Change gdb_regex.h to
3068 (COMMON_OBS): Add gdb_regex.o.
3070 * common/common.m4 (GDB_AC_COMMON): Add gdb_use_included_regex,
3071 --without-included-regex and USE_INCLUDED_REGEX.
3072 * common/gdb_regex.c: New file from utils.c functions.
3073 * common/gdb_regex.h: Move it here from gdb_regex.h, update include
3074 file wrapping define name.
3075 * configure: Rebuilt.
3076 * configure.ac (gdb_use_included_regex, --without-included-regex)
3077 (USE_INCLUDED_REGEX): Move them to common/common.m4.
3078 * gdb_regex.h: Move it to common/gdb_regex.h.
3079 * utils.c: Remove include gdb_regex.h.
3080 (do_regfree_cleanup, make_regfree_cleanup, get_regcomp_error)
3081 (compile_rx_or_error): Move them to common/gdb_regex.c.
3083 2015-07-15 Aleksandar Ristovski <aristovski@qnx.com
3084 Jan Kratochvil <jan.kratochvil@redhat.com>
3086 Create empty nat/linux-maps.[ch] and common/target-utils.[ch].
3087 * Makefile.in (HFILES_NO_SRCDIR); Add nat/linux-maps.h,
3088 common/target-utils.h.
3089 (COMMON_OBS): Add target-utils.o.
3090 (linux-maps.o, target-utils.o): New.
3091 * target/target-utils.c: New file.
3092 * target/target-utils.h: New file.
3093 * config/i386/linux.mh (NATDEPFILES): Add linux-maps.o.
3094 * config/i386/linux64.mh (NATDEPFILES): Ditto.
3095 * nat/linux-maps.c: New file.
3096 * nat/linux-maps.h: New file.
3098 2015-07-15 Markus Metzger <markus.t.metzger@intel.com>
3099 Pedro Alves <palves@redhat.com>
3101 * nat/linux-btrace.c (perf_event_read): Change the type of DATA_HEAD.
3102 (perf_event_read_all): Change the type of SIZE and DATA_HEAD.
3103 (perf_event_read_bts): Change the type of SIZE and READ.
3104 (linux_enable_bts): Change the type of SIZE, PAGES, DATA_SIZE,
3105 and DATA_OFFSET. Move DATA_SIZE declaration. Restrict the buffer size
3106 to UINT_MAX. Check for overflows when using DATA_HEAD from the perf
3108 (linux_enable_pt): Change the type of PAGES and SIZE. Restrict the
3109 buffer size to UINT_MAX.
3110 (linux_read_bts): Change the type of BUFFER_SIZE, SIZE, DATA_HEAD, and
3112 * nat/linux-btrace.h (struct perf_event_buffer)<size, data_head>
3113 <last_head>: Change type.
3114 * common/btrace-common.h (struct btrace_dat_pt) <size>: Change type.
3115 * common/btrace-common.c (btrace_data_append): Change the type of
3117 * btrace.c (parse_xml_raw): Change the type of SIZE. Change oddness
3120 2015-07-14 Simon Marchi <simon.marchi@ericsson.com>
3122 * gdbtypes.h (CHECK_TYPEDEF): Remove.
3123 * aarch64-tdep.c (aarch64_return_in_memory): Replace CHECK_TYPEDEF
3125 * ada-lang.c (decode_constrained_packed_array_type): Likewise.
3126 (ada_array_length): Likewise.
3127 (find_parallel_type_by_descriptive_type): Likewise.
3128 (ada_check_typedef): Likewise.
3129 * arm-tdep.c (arm_return_in_memory): Likewise.
3130 * ax-gdb.c (gen_trace_static_fields): Likewise.
3131 (gen_struct_ref_recursive): Likewise.
3132 * c-exp.y (exp : SIZEOF '(' type ')' %prec UNARY): Likewise.
3133 (variable: block COLONCOLON name): Likewise.
3134 (qualified_name: TYPENAME COLONCOLON name): Likewise.
3135 * c-lang.c (classify_type): Likewise.
3136 * c-typeprint.c (c_print_type): Likewise.
3137 (c_print_typedef): Likewise.
3138 (c_type_print_base): Likewise.
3139 * c-valprint.c (c_val_print): Likewise.
3140 * compile/compile-c-types.c (convert_type): Likewise.
3141 * compile/compile-object-load.c (get_out_value_type): Likewise.
3142 * completer.c (add_struct_fields): Likewise.
3143 (expression_completer): Likewise.
3144 * cp-namespace.c (cp_find_type_baseclass_by_name): Likewise.
3145 (cp_lookup_nested_symbol_1): Likewise.
3146 (cp_lookup_nested_symbol): Likewise.
3147 * cp-valprint.c (cp_print_value_fields): Likewise.
3148 (cp_print_static_field): Likewise.
3149 * d-valprint.c (d_val_print): Likewise.
3150 * eval.c (evaluate_subexp_standard): Likewise.
3151 (evaluate_subexp_for_sizeof): Likewise.
3152 * f-exp.y (exp : SIZEOF '(' type ')' %prec UNARY): Likewise.
3153 * f-typeprint.c (f_type_print_base): Likewise.
3154 * f-valprint.c (f_val_print): Likewise.
3155 * gdbtypes.c (get_discrete_bounds): Likewise.
3156 (create_array_type_with_stride): Likewise.
3157 (type_name_no_tag_or_error): Likewise.
3158 (lookup_struct_elt_type): Likewise.
3159 (get_unsigned_type_max): Likewise.
3160 (internal_type_vptr_fieldno): Likewise.
3161 (set_type_vptr_fieldno): Likewise.
3162 (internal_type_vptr_basetype): Likewise.
3163 (set_type_vptr_basetype): Likewise.
3164 (get_vptr_fieldno): Likewise.
3165 (is_integral_type): Likewise.
3166 (is_scalar_type): Likewise.
3167 (is_scalar_type_recursive): Likewise.
3168 (distance_to_ancestor): Likewise.
3169 (is_unique_ancestor_worker): Likewise.
3170 (check_types_equal): Likewise.
3171 * gnu-v2-abi.c (gnuv2_value_rtti_type): Likewise.
3173 2015-07-14 Iain Buclaw <ibuclaw@gdcproject.org>
3175 * dwarf2read.c (find_slot_in_mapped_hash): Extend language support to
3176 also test for language_d.
3177 (dwarf2_compute_name): Likewise.
3178 (read_func_scope): Likewise.
3179 (read_structure_type): Likewise.
3180 (new_symbol_full): Likewise.
3181 (determine_prefix): Likewise.
3182 (read_import_statement): Use dot as the separator for language_d.
3183 (typename_concat): Likewise, but don't prefix the D main function.
3185 2015-07-14 Peter Bergner <bergner@vnet.ibm.com>
3187 * nat/linux-namespaces.c (setns): Rename from this ...
3188 (do_setns): ... to this. Support calling setns if it exists.
3189 (mnsh_handle_setns): Call do_setns.
3191 2015-07-13 Yao Qi <yao.qi@linaro.org>
3193 * exec.c (exec_file_attach): Add period at the end of error
3196 2015-07-13 Andrew Burgess <andrew.burgess@embecosm.com>
3198 * tui/tui-win.c (window_name_completer): New function.
3199 (focus_completer): Call window_name_completer. All old content
3200 moved into window_name_completer.
3201 (winheight_completer): New function.
3202 (_initialize_tui_win): Rename variable. Add completer to
3203 winheight command. Update doc string on winheight.
3205 2015-07-12 Sandra Loosemore <sandra@codesourcery.com>
3207 * nios2-linux-tdep.c (_initialize_nios2_linux_tdep): Register
3208 all nios2 mach variants.
3210 2015-07-10 Kevin Buettner <kevinb@redhat.com>
3212 * rx-tdep.c (rx_get_opcode_byte): Use target_read_code instead
3213 of target_read_memory.
3215 2015-07-10 Andrew Burgess <andrew.burgess@embecosm.com>
3217 * tui/tui-win.c (tui_set_win_height): Use a cleanup to free the
3219 (parse_scrolling_args): Likewise.
3221 2015-07-10 Andrew Burgess <andrew.burgess@embecosm.com>
3223 * tui/tui-win.c (focus_completer): Don't duplicate the tui window
3224 names in this function.
3226 2015-07-10 Andrew Burgess <andrew.burgess@embecosm.com>
3228 * tui/tui-data.h (SRC_NAME): Convert to lower case.
3229 (CMD_NAME): Likewise.
3230 (DATA_NAME): Likewise.
3231 (DISASSEM_NAME): Likewise.
3232 * tui/tui-win.c (tui_set_focus): Window names are now lower case.
3233 (tui_set_win_height): Likewise.
3234 (parse_scrolling_args): Likewise.
3236 2015-07-10 Markus Metzger <markus.t.metzger@intel.com>
3238 * record-btrace.c (record_btrace_goto_begin)
3239 (record_btrace_goto_end, record_btrace_goto): Move call to
3240 print_stack_frame ...
3241 (record_btrace_set_replay): ... here. Set stop_pc.
3242 * record-full.c (record_full_goto_entry): Set stop_pc.
3244 2015-07-09 Pierre Langlois <pierre.langlois@arm.com>
3246 * NEWS: Mention support for tracepoints on aarch64-linux.
3248 2015-07-09 Pierre Langlois <pierre.langlois@arm.com>
3250 * linux-aarch64-low.c (aarch64_supports_tracepoints): New
3252 (the_low_target): Install it.
3254 2015-07-09 Pierre Langlois <pierre.langlois@arm.com>
3256 * gdb.trace/backtrace.exp: Set registers for aarch64 target.
3257 * gdb.trace/collection.exp: Likewise.
3258 * gdb.trace/mi-trace-frame-collected.exp: Likewise.
3259 * gdb.trace/mi-trace-unavailable.exp: Likewise.
3260 * gdb.trace/report.exp: Likewise.
3261 * gdb.trace/trace-break.exp: Likewise.
3262 * gdb.trace/unavailable.exp: Likewise.
3263 * gdb.trace/while-dyn.exp: Likewise.
3265 2015-07-09 Pierre Langlois <pierre.langlois@arm.com>
3267 * aarch64-tdep.c: Add ax.h and ax-gdb.h includes.
3268 (aarch64_gen_return_address): New function.
3269 (aarch64_gdbarch_init): Hook it.
3271 2015-07-09 Pierre Langlois <pierre.langlois@arm.com>
3273 * aarch64-tdep.c (aarch64_make_stub_cache): Set available_p and
3274 swallow NOT_AVAILABLE_ERROR.
3275 (aarch64_stub_this_id): Call frame_id_build_unavailable_stack if
3276 available_p is not set.
3277 (aarch64_stub_frame_unwind_stop_reason): New function.
3278 (aarch64_stub_unwind): Install it.
3280 2015-07-09 Pierre Langlois <pierre.langlois@arm.com>
3282 * aarch64-tdep.c (aarch64_prologue_cache) <available_p>: New
3284 (aarch64_make_prologue_cache_1): New function, factored out from
3285 aarch64_make_prologue_cache. Do not allocate cache. Set
3287 (aarch64_make_prologue_cache): Reimplement wrapping
3288 aarch64_make_prologue_cache_1, and swallowing
3289 NOT_AVAILABLE_ERROR.
3290 (aarch64_prologue_frame_unwind_stop_reason): New function.
3291 Return UNWIND_UNAVAILABLE if available_p is not set.
3292 (aarch64_prologue_unwind): Install it.
3293 (aarch64_prologue_this_id): Move prev_pc and prev_sp limit
3294 checks into aarch64_prologue_frame_unwind_stop_reason. Call
3295 frame_id_build_unavailable_stack if available_p is not set.
3297 2015-07-09 Pierre Langlois <pierre.langlois@arm.com>
3299 * aarch64-tdep.c (aarch64_prologue_cache) <func, prev_pc>: New
3301 (aarch64_scan_prologue): Set prev_pc.
3302 (aarch64_make_prologue_cache): Set func.
3303 (aarch64_make_stub_cache): Set prev_pc.
3304 (aarch64_prologue_this_id): Remove local variables id, pc and
3305 func. Read prev_pc and func from cache.
3306 (aarch64_stub_this_id): Read prev_pc from cache.
3308 2015-07-09 Pierre Langlois <pierre.langlois@arm.com>
3310 * aarch64-tdep.c (aarch64_make_stub_cache): Update comment. New
3311 argument this_cache. Remove unused local variables reg and
3312 unwound_fp. Return early if this_cache is already set. Set
3314 (aarch64_stub_this_id): Update call to aarch64_make_stub_cache.
3316 2015-07-09 Pierre Langlois <pierre.langlois@arm.com>
3318 * aarch64-tdep.c (aarch64_make_prologue_cache): Update comment.
3319 New argument this_cache. Return early if this_cache is already
3320 set. Set this_cache.
3321 (aarch64_prologue_this_id): Update call to
3322 aarch64_make_prologue_cache.
3323 (aarch64_prologue_prev_register): Likewise.
3324 (aarch64_normal_frame_base): Likewise.
3326 2015-07-09 Simon Marchi <simon.marchi@ericsson.com>
3328 * c-valprint.c (c_val_print): Factor out memberptr printing code
3329 from c_val_print to ...
3330 (c_val_print_memberptr): ... this new function.
3332 2015-07-09 Simon Marchi <simon.marchi@ericsson.com>
3334 * c-valprint.c (c_val_print): Factor out int printing code to ...
3335 (c_val_print_int): ... this new function.
3337 2015-07-09 Simon Marchi <simon.marchi@ericsson.com>
3339 * c-valprint.c (c_val_print): Factor out struct and union
3340 printing code to ...
3341 (c_val_print_struct): ... this new function ...
3342 (c_val_print_union): ... and this new function.
3344 2015-07-09 Simon Marchi <simon.marchi@ericsson.com>
3346 * c-valprint.c (c_val_print): Factor out pointer printing code
3348 (c_val_print_ptr): ... this new function.
3350 2015-07-09 Simon Marchi <simon.marchi@ericsson.com>
3352 * c-valprint.c (c_valprint): Factor our array printing code from
3354 (c_val_print_array): ... this new function.
3356 2015-07-09 Simon Marchi <simon.marchi@ericsson.com>
3358 * c-valprint.c (c_val_print): Factor out pointer printing code
3360 (print_unpacked_pointer): ... this new function.
3362 2015-07-09 Simon Marchi <simon.marchi@ericsson.com>
3364 * c-valprint.c (c_val_print): Remove an assignment to i and move
3367 2015-07-09 Yao Qi <yao.qi@linaro.org>
3369 * aarch64-linux-nat.c (aarch64_linux_get_debug_reg_capacity): Add
3370 argument ptid. Update comments. Caller update.
3372 2015-07-09 Markus Metzger <markus.t.metzger@intel.com>
3374 * btrace.c (pt_print_packet): Print stop, vmcs, tma, mtc, cyc, and
3377 2015-07-09 Markus Metzger <markus.t.metzger@intel.com>
3379 * btrace.c (btrace_pt_readmem_callback): Change type of PC argument.
3381 2015-07-08 Simon Marchi <simon.marchi@ericsson.com>
3383 * progspace.c (delete_program_space): Add missing spaces.
3385 2015-07-08 Simon Marchi <simon.marchi@ericsson.com>
3387 * inferior.c (delete_inferior_1): Rename to ...
3388 (delete_inferior): ..., remove 'silent' parameter, delete
3389 program space when unused and remove call to prune_program_spaces.
3390 Remove the old, unused, delete_inferior.
3391 (delete_inferior_silent): Remove.
3392 (prune_inferiors): Change call from delete_inferior_1 to
3393 delete_inferior and remove 'silent' parameter. Remove call to
3394 prune_program_spaces.
3395 (remove_inferior_command): Idem.
3396 * inferior.h (delete_inferior_1): Rename to...
3397 (delete_inferior): ..., remove 'silent' parameter and remove the
3398 original delete_inferior.
3399 (delete_inferior_silent): Remove.
3400 * mi/mi-main.c (mi_cmd_remove_inferior): Change call from
3401 delete_inferior_1 to delete_inferior and remove 'silent'
3403 * progspace.c (prune_program_spaces): Remove.
3404 (pspace_empty_p): Rename to...
3405 (program_space_empty_p): ... and make non-static.
3406 (delete_program_space): New.
3407 * progspace.h (prune_program_spaces): Remove declaration.
3408 (program_space_empty_p): New declaration.
3409 (delete_program_space): New declaration.
3410 * monitor.c (monitor_close): Replace call to
3411 delete_thread_silent and delete_inferior_silent with
3412 discard_all_inferiors.
3414 2015-07-08 Patrick Palka <patrick@parcs.ath.cx>
3416 * defs.h (deprecated_register_changed_hook): Remove prototype.
3417 * interps.c (clear_iterpreter_hooks): Remove reference to
3418 deprecated_register_changed_hook.
3419 * top.c (deprecated_register_changed_hook): Remove prototype.
3420 * valops.c (value_assign): Remove reference to
3421 deprecated_register_changed_hook.
3422 * tui/tui-hooks.c (tui_register_changed): Add parameter "frame".
3423 Add comment documenting the function.
3424 (tui_register_changed_observer): Define.
3425 (tui_install_hooks): Remove reference to
3426 deprecated_register_changed_hook. Set
3427 tui_register_changed_observer.
3428 (tui_remove_hooks): Remove reference to
3429 deprecated_register_changed_hook. Unset
3430 tui_register_changed_observer.
3432 2015-07-08 Jan Kratochvil <jan.kratochvil@redhat.com>
3435 * compile/compile-c-types.c (insert_type): Change gdb_assert to error.
3437 2015-07-08 Robert O'Callahan <robert@ocallahan.org>
3440 * ax-gdb.c (gen_conversion): Extend to 'to' bits, not 'from'.
3442 2015-07-08 Markus Metzger <markus.t.metzger@intel.com>
3444 * MAINTAINERS (Write After Approval): Add Markus T. Metzger.
3446 2015-07-08 Markus Metzger <markus.t.metzger@intel.com>
3448 * nat/linux-btrace.c (kernel_supports_bts, kernel_supports_pt):
3449 Use safe_strerror() instead of strerror().
3451 2015-07-07 Yao Qi <yao.qi@linaro.org>
3453 * features/arm-with-m-fpa-layout.xml: Set architecture to arm.
3454 * features/arm-with-m-fpa-layout.c: Regenerated.
3455 * features/arm-with-m-vfp-d16.xml: Likewise.
3456 * features/arm-with-m-vfp-d16.c: Regenerated.
3457 * features/arm-with-m.xml: Likewise.
3458 * features/arm-with-m.c: Regenerated.
3459 * features/arm-with-neon.xml: Likewise.
3460 * features/arm-with-neon.c: Regenerated.
3461 * features/arm-with-vfpv2.xml: Likewise.
3462 * features/arm-with-vfpv2.c: Regenerated.
3463 * features/arm-with-vfpv3.xml: Likewise.
3464 * features/arm-with-vfpv3.c: Regenerated.
3466 2015-07-07 Yao Qi <yao.qi@linaro.org>
3468 * aarch32-linux-nat.h (VFP_REGS_SIZE): New macro, moved from
3470 * aarch64-linux-nat.c: Include aarch32-linux-nat.h and
3472 (fetch_gregs_from_thread): Call aarch32_gp_regcache_supply
3473 if target is 32-bit.
3474 (store_gregs_to_thread): Call aarch32_gp_regcache_collect
3475 if target is 32-bit.
3476 (fetch_fpregs_from_thread): Call aarch32_vfp_regcache_supply
3477 if target is 32-bit.
3478 (store_fpregs_to_thread): Call aarch32_vfp_regcache_collect
3479 if target is 32-bit.
3480 (tdesc_arm_with_vfpv3, tdesc_arm_with_neon): Declare.
3481 (aarch64_linux_read_description): Return the right target
3483 * arm-linux-nat.c (VFP_REGS_SIZE): Moved to aarch32-linux-nat.h.
3484 * config/aarch64/linux.mh (NATDEPFILES): Add aarch32-linux-nat.o.
3485 * configure.tgt (aarch64*-*-linux*): Add arm-tdep.o and
3488 2015-07-07 Yao Qi <yao.qi@linaro.org>
3490 * aarch32-linux-nat.c: New file.
3491 * aarch32-linux-nat.h: New file.
3492 * arm-linux-nat.c: Include aarch32-linux-nat.h.
3493 (fetch_regs): Move code to aarch32-linux-nat.c. Call
3494 aarch32_gp_regcache_supply.
3495 (store_regs): Move code to aarch32-linux-nat.c. Call
3496 aarch32_gp_regcache_collect.
3497 (fetch_vfp_regs): Move code to aarch32-linux-nat.c. Call
3498 aarch32_vfp_regcache_supply.
3499 (store_vfp_regs): Move code to aarch32-linux-nat.c. Call
3500 aarch32_vfp_regcache_collect.
3501 * config/arm/linux.mh (NATDEPFILES): Add aarch32-linux-nat.o.
3503 2015-07-07 Yao Qi <yao.qi@linaro.org>
3505 * arm-linux-nat.c (store_fpregister): Remove.
3506 (store_register): Likewise.
3507 (fetch_fpregister): Likewise.
3508 (fetch_register): Likewise.
3509 (arm_linux_store_inferior_registers): Call store_regs and
3510 store_fpregs instead.
3511 (arm_linux_fetch_inferior_registers): Call fetch_fpregs and
3514 2015-07-06 Andrew Burgess <andrew.burgess@embecosm.com>
3516 * doc/gdb.texinfo (TUI): Restructure documentation on TUI layout
3519 2015-07-06 Joel Brobecker <brobecker@adacore.com>
3521 * NEWS: Create a new section for the next release branch.
3522 Rename the section of the current branch, now that it has
3525 2015-07-06 Joel Brobecker <brobecker@adacore.com>
3527 GDB 7.10 branch created (66c4b3e8a628a207bc6aafef6af0c4128195f56e):
3528 * version.in: Bump version to 7.10.50.DATE-cvs.
3530 2015-07-06 Luis Machado <lgustavo@codesourcery.com>
3532 * breakpoint.c (remove_breakpoint_1): Don't handle permanent
3533 breakpoints in a special way.
3534 (remove_breakpoint): Likewise.
3535 (mark_breakpoints_out): Likewise.
3537 2015-07-06 Andrew Burgess <andrew.burgess@embecosm.com>
3539 * doc/gdb.texinfo (TUI): Add comma after @xref.
3541 2015-07-06 Andrew Burgess <andrew.burgess@embecosm.com>
3543 * tui/tui-win.c (tui_set_focus): Use structure member 'generic'
3544 instead of casting the structure type.
3546 2015-07-06 Simon Marchi <simon.marchi@ericsson.com>
3548 * valops.c (search_struct_field): Remove OFFSET parameter.
3549 (value_cast_structs): Adjust calls to search_struct_field.
3550 (value_struct_elt): Same.
3551 (find_overload_match): Same.
3553 2015-07-06 Simon Marchi <simon.marchi@ericsson.com>
3555 * value.c (value_fetch_lazy): Update comment, change return
3557 * value.h (value_fetch_lazy): Change return value to void.
3559 2015-07-06 Andrew Burgess <andrew.burgess@embecosm.com>
3561 * tui/tui-data.c (tui_partial_win_by_name): Window name is const.
3562 (tui_win_name): Make parameter and result const.
3563 * tui/tui-data.h (tui_win_name): Make parameter and result const.
3565 2015-07-06 Patrick Palka <patrick@parcs.ath.cx>
3567 * i386-tdep.c (i386_mpx_info_bounds): Don't call error, instead
3568 use printf_unfiltered.
3569 (set_mpx_cmd): Add missing trailing space to command string
3571 (_initialize_i386_tdep): Give the "mpx" prefix command its
3574 2015-07-02 Kevin Buettner <kevinb@redhat.com>
3576 * rx-tdep.c (RX_USP_REGNUM, RX_BPC_REGNUM): New constants.
3577 (enum rx_frame_type): New.
3578 (struct rx_prologue): Add new field `frame_type'.
3579 (rx_analyze_prologue): Add `frame_type' parameter. Cache this
3580 parameter in the prologue struct. Add code for recording
3581 locations of PC and PSW for fast interrupt and exception frames.
3582 (rx_skip_prologue): Adjust call to rx_analyze_prologue.
3583 (rx_analyze_frame_prologue): Add `frame_type' parameter.
3584 (rx_frame_type): New function.
3585 (rx_frame_base): Fetch frame type and pass it to rx_analyze_prologue.
3586 (rx_frame_this_id): Rename parameter `this_prologue_cache' to
3588 (rx_frame_prev_register): Rename parameter `this_prologue_cache' to
3589 `this_cache'. Add cases for RX_FRAME_TYPE_EXCEPTION and
3590 RX_FRAME_TYPE_FAST_INTERRUPT.
3591 (normal_frame_p, exception_frame_p, rx_frame_sniffer_common)
3592 (rx_frame_sniffer, rx_exception_sniffer): New functions.
3593 (rx_frame_unwind): Use rx_frame_sniffer instead of
3594 default_frame_sniffer.
3595 (rx_frame_unwind): New unwinder.
3596 (rx_gdbarch_init): Register new unwinder.
3598 2015-07-02 Kevin Buettner <kevinb@redhat.com>
3600 * rx-tdep.c (RX_BPSW_REGNUM, RX_FPSW_REGNUM): New constants.
3601 (struct gdbarch_tdep): Add fields rx_psw_type and rx_fpsw_type.
3602 (rx_register_type): Add cases for RX_PSW_REGNUM, RX_BPSW_REGNUM,
3604 (rx_gdbarch_init): Initialize PSW, BPSW, and FPSW flags types.
3606 2015-07-02 Jan Kratochvil <jan.kratochvil@redhat.com>
3608 Fix GCC false warning.
3609 * s390-linux-tdep.c (s390_handle_arg): Initialize VAL.
3611 2015-07-02 Yao Qi <yao.qi@linaro.org>
3613 * aarch64-linux-nat.c (aarch64_linux_insert_hw_breakpoint): Fix
3614 typo in the debugging message.
3616 2015-07-02 Markus Metzger <markus.t.metzger@intel.com>
3618 * btrace.c: Include gdbcmd.h, cli/cli-utils.h, and ctype.h.
3619 (maint_btrace_cmdlist, maint_btrace_set_cmdlist)
3620 (maint_btrace_show_cmdlist, maint_btrace_pt_set_cmdlist)
3621 (maint_btrace_pt_show_cmdlist, maint_btrace_pt_skip_pad)
3622 (btrace_maint_clear): New.
3623 (btrace_fetch, btrace_clear): Call btrace_maint_clear.
3624 (pt_print_packet, btrace_maint_decode_pt)
3625 (btrace_maint_update_pt_packets, btrace_maint_update_packets)
3626 (btrace_maint_print_packets, get_uint, get_context_size, no_chunk)
3627 (maint_btrace_packet_history_cmd)
3628 (maint_btrace_clear_packet_history_cmd, maint_btrace_clear_cmd)
3629 (maint_btrace_cmd, maint_btrace_set_cmd, maint_btrace_show_cmd)
3630 (maint_btrace_pt_set_cmd, maint_btrace_pt_show_cmd)
3631 (maint_info_btrace_cmd, _initialize_btrace): New.
3632 * btrace.h (btrace_pt_packet, btrace_pt_packet_s)
3633 (btrace_maint_packet_history, btrace_maint_info): New.
3634 (btrace_thread_info) <maint>: New.
3635 * NEWS: Announce it.
3637 2015-07-02 Markus Metzger <markus.t.metzger@intel.com>
3639 * btrace.c (btrace_fetch): Append the new trace data.
3640 (btrace_clear): Clear the stored trace data.
3641 * btrace.h (btrace_thread_info) <data>: New.
3642 * common/btrace-common.h (btrace_data_clear)
3643 (btrace_data_append): New.
3644 * common/btrace-common.c (btrace_data_clear)
3645 (btrace_data_append): New.
3647 2015-07-02 Markus Metzger <markus.t.metzger@intel.com>
3649 * nat/linux-btrace.c (linux_enable_bts): Check for
3650 PERF_ATTR_SIZE_VER5.
3651 Check for data_offset and data_size fields. Use them.
3653 2015-07-02 Markus Metzger <markus.t.metzger@intel.com>
3655 * NEWS: Announce new commands "record btrace pt" and "record pt".
3656 Announce new options "set|show record btrace pt buffer-size".
3657 * btrace.c: Include "rsp-low.h".
3658 Include "inttypes.h".
3659 (btrace_add_pc): Add forward declaration.
3660 (pt_reclassify_insn, ftrace_add_pt, btrace_pt_readmem_callback)
3661 (pt_translate_cpu_vendor, btrace_finalize_ftrace_pt)
3662 (btrace_compute_ftrace_pt): New.
3663 (btrace_compute_ftrace): Support BTRACE_FORMAT_PT.
3664 (check_xml_btrace_version): Update version check.
3665 (parse_xml_raw, parse_xml_btrace_pt_config_cpu)
3666 (parse_xml_btrace_pt_raw, parse_xml_btrace_pt)
3667 (btrace_pt_config_cpu_attributes, btrace_pt_config_children)
3668 (btrace_pt_children): New.
3669 (btrace_children): Add support for "pt".
3670 (parse_xml_btrace_conf_pt, btrace_conf_pt_attributes): New.
3671 (btrace_conf_children): Add support for "pt".
3672 * btrace.h: Include "intel-pt.h".
3673 (btrace_pt_error): New.
3674 * common/btrace-common.c (btrace_format_string, btrace_data_fini)
3675 (btrace_data_empty): Support BTRACE_FORMAT_PT.
3676 * common/btrace-common.h (btrace_format): Add BTRACE_FORMAT_PT.
3677 (struct btrace_config_pt): New.
3678 (struct btrace_config)<pt>: New.
3679 (struct btrace_data_pt_config, struct btrace_data_pt): New.
3680 (struct btrace_data)<pt>: New.
3681 * features/btrace-conf.dtd (btrace-conf)<pt>: New.
3683 * features/btrace.dtd (btrace)<pt>: New.
3684 (pt, pt-config, cpu): New.
3685 * nat/linux-btrace.c (perf_event_read, perf_event_read_all)
3686 (perf_event_pt_event_type, kernel_supports_pt)
3687 (linux_supports_pt): New.
3688 (linux_supports_btrace): Support BTRACE_FORMAT_PT.
3689 (linux_enable_bts): Free tinfo on error.
3690 (linux_enable_pt): New.
3691 (linux_enable_btrace): Support BTRACE_FORMAT_PT.
3692 (linux_disable_pt): New.
3693 (linux_disable_btrace): Support BTRACE_FORMAT_PT.
3694 (linux_fill_btrace_pt_config, linux_read_pt): New.
3695 (linux_read_btrace): Support BTRACE_FORMAT_PT.
3696 * nat/linux-btrace.h (struct btrace_tinfo_pt): New.
3697 (struct btrace_target_info)<pt>: New.
3698 * record-btrace.c (set_record_btrace_pt_cmdlist)
3699 (show_record_btrace_pt_cmdlist): New.
3700 (record_btrace_print_pt_conf): New.
3701 (record_btrace_print_conf): Support BTRACE_FORMAT_PT.
3702 (btrace_ui_out_decode_error): Support BTRACE_FORMAT_PT.
3703 (cmd_record_btrace_pt_start): New.
3704 (cmd_record_btrace_start): Support BTRACE_FORMAT_PT.
3705 (cmd_set_record_btrace_pt, cmd_show_record_btrace_pt): New.
3706 (_initialize_record_btrace): Add new commands.
3707 * remote.c (PACKET_Qbtrace_pt, PACKET_Qbtrace_conf_pt_size): New.
3708 (remote_protocol_features): Add "Qbtrace:pt".
3709 Add "Qbtrace-conf:pt:size".
3710 (remote_supports_btrace): Support BTRACE_FORMAT_PT.
3711 (btrace_sync_conf): Support PACKET_Qbtrace_conf_pt_size.
3712 (remote_enable_btrace): Support BTRACE_FORMAT_PT.
3713 (_initialize_remote): Add new commands.
3715 2015-07-02 Markus Metzger <markus.t.metzger@intel.com>
3717 * configure.ac: check for libipt
3718 * configure: Regenerate.
3719 * config.in: Regenerate.
3720 * Makefile.in (LIBIPT): New.
3721 (CLIBS): Add $LIBIPT.
3722 * NEWS: document new configure options
3724 2015-07-02 Jan Kratochvil <jan.kratochvil@redhat.com>
3726 * compile/compile-object-load.c (compile_object_load): Replace debug
3727 message "lookup undefined ELF symbol" by 3 more specific messages.
3729 2015-07-01 Kevin Buettner <kevinb@redhat.com>
3731 * rl78-tdep.c (struct gdbarch_tdep): Add new field, rl78_psw_type.
3732 (rl78_register_type): Add case for RL78_PSW_REGNUM.
3733 (rl78_gdbarch_init): Initialize rl78_psw_type.
3735 2015-07-01 Patrick Palka <patrick@parcs.ath.cx>
3737 * tui/tui-hooks.c (tui_refresh_frame_and_register_information):
3738 Update commentary. Always refresh the registers when frame
3739 information has changed.
3740 * tui/tui-stack.c (tui_show_frame_info): Update commentary.
3741 Change return type to int. Return 1 if frame information has
3742 changed, 0 otherwise.
3743 (tui_before_prompt): Update commentary.
3744 * tui/tui-stack.h (tui_show_frame_info): Change return type to
3747 2015-06-30 Patrick Palka <patrick@parcs.ath.cx>
3750 * frame.c (select_frame): Remove reference to
3751 deprecated_selected_frame_level_changed_hook.
3752 * frame.h (deprecated_selected_frame_level_changed_hook): Remove
3754 * stack.c (deprecated_selected_frame_level_changed_hook):
3756 * tui/tui-hooks.c (tui_selected_frame_level_changed_hook):
3758 (tui_refresh_frame_and_register_information): ... this. Bail
3759 out if there is no stack. Don't update register information
3760 unless registers_too_p is true.
3761 (tui_print_frame_info_listing_hook): Rename to ...
3762 (tui_dummy_print_frame_info_listing_hook): ... this.
3763 (tui_before_prompt): New function.
3764 (tui_normal_stop): New function.
3765 (tui_before_prompt_observer): New observer.
3766 (tui_normal_stop_observer): New observer.
3767 (tui_install_hooks): Set
3768 deprecated_print_frame_info_listing_hook to
3769 tui_dummy_print_frame_info_listing_hook. Register
3770 tui_before_prompt_observer to call tui_before_prompt and
3771 tui_normal_stop_observer to call tui_normal_stop. Remove
3772 reference to deprecated_selected_frame_level_changed_hook.
3773 (tui_remove_hooks): Detach and unset tui_before_prompt_observer
3774 and tui_normal_stop_observer. Remove reference to
3775 deprecated_selected_frame_level_changed_hook.
3777 2015-06-30 Patrick Palka <patrick@parcs.ath.cx>
3780 * tui/tui-stack.c (tui_set_locator_info): Change prototype to
3781 return an int instead of void. Return whether the locator
3783 (tui_show_frame_info): If the locator info has not changed, then
3784 bail out early to avoid refreshing the windows.
3786 2015-06-30 Patrick Palka <patrick@parcs.ath.cx>
3788 * tui/tui-stack.c (tui_set_locator_info): Explicitly pass
3789 LOCATOR_WIN to tui_alloc_content.
3791 2015-06-30 Yao Qi <yao.qi@linaro.org>
3794 * arm-tdep.c (arm_get_next_pc_raw): Break for media
3797 2015-06-29 Kevin Buettner <kevinb@redhat.com>
3799 * rx-tdep.c (RX_PSW_REGNUM): New enum constant.
3800 (rx_dwarf_reg_to_regnum): New function.
3801 (rx_gdbarch_init): Register rx_dwarf_reg_to_regnum. Use dwarf2
3804 2015-06-29 Pedro Alves <palves@redhat.com>
3807 * infcall.c (run_inferior_call): On infcall success, if the thread
3808 was marked stopped before, reset it back to stopped.
3809 * infrun.c (resume): Don't suppress the set_running calls when
3811 (normal_stop): Only discard the finish_thread_state cleanup if the
3814 2015-06-29 Pierre Langlois <pierre.langlois@arm.com>
3816 * MAINTAINERS (Write After Approval): Update my email address.
3818 2015-06-26 Keith Seitz <keiths@redhat.com>
3819 Doug Evans <dje@google.com>
3822 * block.c (block_lookup_symbol): For non-function blocks,
3823 continue to search for a symbol with an exact domain match
3824 Otherwise, return any previously found "best domain" symbol.
3825 (block_lookup_symbol_primary): Likewise.
3827 2015-06-26 Patrick Palka <patrick@parcs.ath.cx>
3829 * NEWS: Mention the new option "history remove-duplicates".
3830 * top.c (history_remove_duplicates): New static variable.
3831 (show_history_remove_duplicates): New static function.
3832 (gdb_add_history): Conditionally remove duplicate history
3834 (init_main): Add "history remove-duplicates" option.
3836 2015-06-26 Patrick Palka <patrick@parcs.ath.cx>
3838 * tui/tui-win.c (focus_completer): New static function.
3839 (_initialize_tui_win): Set the completion function of the
3840 "focus" command to focus_completer.
3842 2015-06-26 Jan Kratochvil <jan.kratochvil@redhat.com>
3844 * linespec.c (minsym_found): Reset sal.PC for COMPUNIT_LOCATIONS_VALID
3846 * symtab.c (find_function_start_sal): Likewise.
3848 2015-06-25 Gary Benson <gbenson@redhat.com>
3850 * solib.c (solib_find_1): Set local variable sysroot to NULL if
3851 it is the empty string after trailing slashes have been stripped.
3853 2015-06-25 Gary Benson <gbenson@redhat.com>
3855 * exec.c (exec_file_locate_attach): Remove gdb_sysroot NULL check.
3856 * infrun.c (follow_exec): Likewise.
3857 * remote.c (remote_filesystem_is_local): Likewise.
3858 * solib.c (solib_find_1): Likewise.
3860 2015-06-24 Keith Seitz <keiths@redhat.com>
3862 * build-id.c (build_id_to_debug_bfd): Add cleanup to free
3863 return value from lrealpath.
3865 2015-06-24 Mike Frysinger <vapier@gentoo.org>
3867 * remote-sim.c (gdbsim_open): Move sysroot update to the top.
3869 2015-06-24 Mike Frysinger <vapier@gentoo.org>
3871 * remote-sim.c: Include gdb_bfd.h.
3872 (gdbsim_open): Declare new local sysroot pointing to gdb_sysroot.
3873 Skip TARGET_SYSROOT_PREFIX in gdb_sysroot when it is active.
3875 2015-06-24 Yao Qi <yao.qi@linaro.org>
3877 * aarch64-linux-tdep.c (aarch64_linux_init_abi): Don't call
3878 set_gdbarch_get_siginfo_type.
3879 * amd64-linux-tdep.c (amd64_linux_init_abi_common): Likewise.
3880 * arm-linux-tdep.c (arm_linux_init_abi): Likewise.
3881 * i386-linux-tdep.c (i386_linux_init_abi): Likewise.
3882 * m68klinux-tdep.c (m68k_linux_init_abi): Likewise.
3883 * ppc-linux-tdep.c (ppc_linux_init_abi): Likewise.
3884 * s390-linux-tdep.c (s390_gdbarch_init): Likewise.
3885 * tilegx-linux-tdep.c (tilegx_linux_init_abi): Likewise.
3886 * linux-tdep.c (linux_get_siginfo_type): Change it to static.
3887 (linux_init_abi): Call set_gdbarch_get_siginfo_type.
3888 * linux-tdep.h (linux_get_siginfo_type): Remove the declaration.
3890 2015-06-24 Gary Benson <gbenson@redhat.com>
3892 * common/buffer.c (stdint.h): Do not include.
3893 * common/print-utils.c (stdint.h): Likewise.
3894 * compile/compile-c-symbols.c (gdb_assert.h): Likewise.
3895 * compile/compile-c-types.c (gdb_assert.h): Likewise.
3896 * ft32-tdep.c (gdb_assert.h): Likewise.
3897 * guile/scm-utils.c (stdint.h): Likewise.
3898 * i386-linux-tdep.c (stdint.h): Likewise.
3899 * i386-tdep.c (stdint.h): Likewise.
3900 * nat/linux-btrace.c (stdint.h): Likewise.
3901 * nat/linux-btrace.h (stdint.h): Likewise.
3902 * nat/linux-ptrace.c (stdint.h): Likewise.
3903 * nat/mips-linux-watch.h (stdint.h): Likewise.
3904 * ppc-linux-nat.c (stdint.h): Likewise.
3905 * python/python-internal.h (stdint.h): Likewise.
3906 * stub-termcap.c (stdlib.h): Likewise.
3907 * target/target.h (stdint.h): Likewise.
3908 * xtensa-linux-nat.c (stdint.h): Likewise.
3910 2015-06-23 Patrick Palka <patrick@parcs.ath.cx>
3912 * top.c (init_history): Look at errno after calling strtol to
3913 properly map large GDBHISTSIZE values to infinity.
3915 2015-06-23 Doug Evans <dje@google.com>
3917 * inferior.h (struct inferior_suspend_state): Delete, unused.
3918 All references deleted.
3920 2015-06-23 Mike Frysinger <vapier@gentoo.org>
3922 * microblaze-tdep.c (microblaze_push_dummy_code): Delete.
3923 (microblaze_push_dummy_call): Likewise.
3924 (microblaze_gdbarch_init): Delete calls to set_gdbarch_push_dummy_code
3925 and set_gdbarch_push_dummy_call.
3927 2015-06-23 Yao Qi <yao.qi@linaro.org>
3929 * amd64-linux-nat.c (amd64_linux_fetch_inferior_registers):
3930 Check whether have_ptrace_getregset is TRIBOOL_TRUE explicitly.
3931 (amd64_linux_store_inferior_registers): Likewise.
3932 * arm-linux-nat.c (fetch_fpregister): Likewise.
3933 (fetch_fpregs, store_fpregister): Likewise.
3934 (store_fpregister, store_fpregs): Likewise.
3935 (fetch_register, fetch_regs): Likewise.
3936 (store_register, store_regs): Likewise.
3937 (fetch_vfp_regs, store_vfp_regs): Likewise.
3938 (arm_linux_read_description): Check have_ptrace_getregset is
3939 TRIBOOL_UNKNOWN. Set have_ptrace_getregset to TRIBOOL_TRUE
3941 * i386-linux-nat.c (fetch_xstateregs): Check
3942 have_ptrace_getregset is not TRIBOOL_TRUE.
3943 (store_xstateregs): Likewise.
3944 * linux-nat.c (have_ptrace_getregset): Change its type to
3946 * linux-nat.h (tribool): New enum.
3947 * x86-linux-nat.c (x86_linux_read_description): Use enum tribool.
3948 Check whether have_ptrace_getregset is TRIBOOL_TRUE.
3950 2015-06-19 Doug Evans <dje@google.com>
3952 * NEWS: Mention Sun's version of stabs is no longer supported.
3953 * elfread.c (free_elfinfo): Delete. All uses updated.
3954 (elfstab_offset_sections): Delete. All uses updated.
3955 * gdb-stabs.h (stab_section_info): Delete. All uses updated.
3956 * psympriv.h (partial_symtab) <section_offsets>: Delete.
3958 * psymtab.c (start_psymtab_common): Delete arg section_offsets.
3959 All callers updated.
3961 2015-06-18 Simon Marchi <simon.marchi@ericsson.com>
3963 * common/rsp-low.c (needs_escaping): New.
3964 (remote_escape_output): Add unit_size parameter. Refactor to
3965 support multi-byte addressable units. Rename parameters.
3966 * common/rsp-low.h (remote_escape_output): Add unit_size
3967 parameter and rename others. Update doc.
3968 * remote.c (align_for_efficient_write): New.
3969 (remote_write_bytes_aux): Add unit_size parameter and use it.
3970 Rename some variables. Update doc.
3971 (remote_xfer_partial): Get unit size and use it.
3972 (remote_read_bytes_1): Add unit_size parameter and use it.
3973 Rename some variables. Update doc.
3974 (remote_write_bytes): Same.
3975 (remote_xfer_live_readonly_partial): Same.
3976 (remote_read_bytes): Same.
3977 (remote_flash_write): Update call to remote_write_bytes_aux.
3978 (remote_write_qxfer): Update call to remote_escape_output.
3979 (remote_search_memory): Same.
3980 (remote_hostio_pwrite): Same.
3982 2015-06-17 Luis Machado <lgustavo@codesourcery.com>
3984 * breakpoint.c (add_location_to_breakpoint): Don't mark permanent
3985 locations as inserted.
3986 Update and expand comment about permanent locations.
3987 (bp_loc_is_permanent): Don't return 0 for bp_call_dummy.
3988 Move comment to add_location_to_breakpoint.
3989 (update_global_location_list): Don't error out if a permanent
3990 breakpoint is not marked inserted.
3991 Don't error out if a non-permanent breakpoint location is inserted on
3992 top of a permanent breakpoint.
3994 2015-06-17 Luis Machado <lgustavo@codesourcery.com>
3996 * breakpoint.c (make_breakpoint_permanent): Remove unused
3998 * breakpoint.h (make_breakpoint_permanent): Remove declaration.
4000 2015-06-17 Patrick Palka <patrick@parcs.ath.cx>
4003 * NEWS: Mention new GDBHISTSIZE behavior.
4004 * top.c (init_history): For null or out-of-range GDBHISTSIZE,
4005 set history size to unlimited. Ignore non-numeric GDBHISTSIZE.
4007 2015-06-17 Patrick Palka <patrick@parcs.ath.cx>
4009 * NEWS: Mention that GDBHISTSIZE is read instead of HISTSIZE.
4010 * top.c (init_history): Read from GDBHISTSIZE instead of
4012 (init_main): Refer to GDBHISTSIZE instead of HISTSIZE.
4014 2015-06-17 Patrick Palka <patrick@parcs.ath.cx>
4016 * top.c (gdb_safe_append_history): Do not call
4017 history_truncate_file if the history is not stifled.
4019 2015-06-17 Andreas Arnez <arnez@linux.vnet.ibm.com>
4021 * syscalls/s390-linux.xml: Add syscalls 344 through 354.
4022 * syscalls/s390x-linux.xml: Likewise.
4024 2015-06-16 Michael Eager <eager@eagercon.com>
4026 * nat/linux-namespaces.c (MSG_CMSG_CLOEXEC): Define if not defined.
4028 2015-06-16 Patrick Palka <patrick@parcs.ath.cx>
4030 * tui/tui-hooks.c (tui_selected_frame_level_changed_hook): Call
4031 target_terminal_ours_for_output() before calling
4032 tui_show_frame_info(), and restore the original terminal
4033 settings afterwards.
4035 2015-06-16 Martin Simmons <martin@lispworks.com> (tiny patch)
4037 * arm-linux-nat.c: Include nat/linux-ptrace.h.
4039 2015-06-15 Simon Marchi <simon.marchi@ericsson.com>
4041 * mi/mi-main.c (mi_cmd_data_read_memory_bytes): Consider addressable
4043 (mi_cmd_data_write_memory_bytes): Same.
4045 2015-06-15 Simon Marchi <simon.marchi@ericsson.com>
4047 * corefile.c (write_memory): Update doc.
4048 * gdbcore.h (write_memory): Same.
4050 2015-06-15 Jan Kratochvil <jan.kratochvil@redhat.com>
4052 * linux-tdep.c (enum filterflags): Make it from anonymous enum.
4053 (dump_mapping_p): Use it for parameter filterflags.
4054 (linux_find_memory_regions_full): Use it for variable filterflags.
4056 2015-06-15 Aleksandar Ristovski <aristovski@qnx.com
4057 Jan Kratochvil <jan.kratochvil@redhat.com>
4059 Merge multiple hex conversions.
4060 * monitor.c: Include rsp-low.h.
4061 (fromhex): Remove definition.
4063 2015-06-15 Aleksandar Ristovski <aristovski@qnx.com
4064 Jan Kratochvil <jan.kratochvil@redhat.com>
4066 Move utility functions to common/.
4067 * cli/cli-utils.c (skip_spaces, skip_spaces_const, skip_to_space_const):
4068 Move defs to common/common-utils.c.
4069 * cli/cli-utils.h (skip_spaces, skip_spaces_const, skip_to_space)
4070 (skip_to_space_const): Move decls to common/common-utils.h.
4071 * common/common-defs.h: Move include of common-types.h before
4073 * common/common-utils.c: Include host-defs.h and ctype.h.
4074 (HIGH_BYTE_POSN, is_digit_in_base, digit_to_int, strtoulst): Move
4076 (skip_spaces, skip_spaces_const, skip_to_space_const): Move from
4078 * common/common-utils.h (strtoulst): Move decl from utils.h.
4079 (skip_spaces, skip_spaces_const, skip_to_space, skip_to_space_const):
4080 Move from cli/cli-utils.h.
4081 * common/host-defs.h: Include limits.h.
4082 (TARGET_CHAR_BIT, HOST_CHAR_BIT): Moved from defs.h.
4083 (skip_spaces, skip_spaces_const): Move decls from cli/cli-utils.h.
4084 * defs.h (TARGET_CHAR_BIT, HOST_CHAR_BIT): Move to
4085 common/common-utils.h.
4086 * utils.c (HIGH_BYTE_POSN, is_digit_in_base, digit_to_int)
4087 (strtoulst): Move to common/common-utils.c.
4088 * utils.h (strtoulst): Moved decl to common/common-utils.h.
4090 2015-06-15 Yao Qi <yao.qi@linaro.org>
4092 * data-directory/Makefile.in (SYSCALLS_FILES): Add aarch64-linux.xml.
4094 2015-06-10 Jon Turney <jon.turney@dronecode.org.uk>
4096 * build-id.c: Don't include elf-bfd.h.
4097 (build_id_bfd_get): Use bfd_build_id.
4098 (build_id_verify): Ditto.
4099 * build-id.h: Ditto.
4100 (find_separate_debug_file_by_buildid): Ditto.
4101 * python/py-objfile.c: Don't include elf-bfd.h.
4102 (objfpy_get_build_id) Use bfd_build_id.
4103 (objfpy_build_id_matches, objfpy_lookup_objfile_by_build_id): Ditto.
4104 * coffread.c: Include build-id.h.
4105 (coff_symfile_read): Try find_separate_debug_file_by_buildid.
4107 2015-06-03 Jon Turney <jon.turney@dronecode.org.uk>
4109 * windows-nat.c (do_windows_fetch_inferior_registers)
4110 (handle_output_debug_string): Replace __COPY_CONTEXT_SIZE
4111 conditional with __CYGWIN__.
4113 2015-06-13 Andrew Burgess <andrew.burgess@embecosm.com>
4115 * completer.c: Add arch-utils.h include.
4116 (enum reg_completer_targets): New enum.
4117 (reg_or_group_completer_1): New function containing old
4118 reg_or_group_completer, add and use new parameter to control what
4119 is completed on. Use get_current_arch rather than architecture of
4120 currently selected frame.
4121 (reg_or_group_completer): Call new reg_or_group_completer_1.
4122 (reggroup_completer): Call new reg_or_group_completer_1.
4123 * completer.h (reggroup_completer): Add declaration.
4124 * tui/tui-regs.c: Add 'completer.h' include.
4125 (tui_reg_next_command): Renamed to...
4126 (tui_reg_next): ...this. Adjust parameters and return rather than
4128 (tui_reg_prev_command): Renamed to...
4129 (tui_reg_prev): ...this. Adjust parameters and return rather than
4131 (tui_reg_float_command): Delete.
4132 (tui_reg_general_command): Delete.
4133 (tui_reg_system_command): Delete.
4134 (tui_reg_command): Rewrite to perform switching of register group.
4136 (tuireglist): Remove.
4137 (tui_reggroup_completer): New function.
4138 (_initialize_tui_regs): Remove 'tui reg' sub-commands, update
4139 creation of 'tui reg' command.
4140 * NEWS: Add comment about 'tui reg' changes.
4142 2015-06-12 Simon Marchi <simon.marchi@ericsson.com>
4144 * target.c (target_read): Consider addressable unit size when
4145 reading from a memory object.
4146 (read_memory_robust): Same.
4147 (read_whatever_is_readable): Same.
4148 (target_write_with_progress): Consider addressable unit size
4149 when writing to a memory object.
4150 * target.h (target_read): Update documentation.
4151 (target_write): Add documentation.
4153 2015-06-12 Simon Marchi <simon.marchi@ericsson.com>
4155 * arch-utils.h (default_addressable_memory_unit_size): New.
4156 * arch-utils.c (default_addressable_memory_unit_size): New.
4157 * gdbarch.sh (addressable_memory_unit_size): New.
4158 * gdbarch.h: Re-generate.
4159 * gdbarch.c: Re-generate.
4161 2015-06-12 Simon Marchi <simon.marchi@ericsson.com>
4163 * target.c (target_read): Rename variables and use
4165 (target_read_with_progress): Same.
4166 (read_memory_robust): Constify parameters and rename
4168 (read_whatever_is_readable): Constify parameters,
4169 rename variables, adjust formatting.
4170 * target.h (read_memory_robust): Constify parameters.
4172 2015-06-12 Ulrich Weigand <uweigand@de.ibm.com>
4174 * ppc-sysv-tdep.c (ppc64_sysv_abi_return_value_base): Handle short
4175 synthetic (non-AltiVec) vector types.
4176 (ppc64_sysv_abi_return_value): Likewise.
4178 2015-06-12 Antoine Tremblay <antoine.tremblay@ericsson.com>
4180 PR breakpoints/16465
4181 * breakpoint.c (create_breakpoint): Save extra_string for
4182 pending breakpoints.
4184 2015-06-10 Walfred Tedeschi <walfred.tedeschi@intel.com>
4186 * i386-tdep.c (i386_mpx_get_bt_entry): Add a cast for mpx_bd_mask
4187 and bt_mask to CORE_ADDR.
4189 2015-06-11 Gary Benson <gbenson@redhat.com>
4191 * nat/linux-namespaces.c (mnsh_send_message): Use pulongest.
4192 (mnsh_recv_message): Likewise.
4194 2015-06-11 Walfred Tedeschi <walfred.tedeschi@intel.com>
4196 * i386-tdep.c (i386_mpx_print_bounds): use of LONGEST instead of
4197 long long int and plongest instead of %ll.
4199 2015-06-11 Gary Benson <gbenson@redhat.com>
4201 * nat/linux-namespaces.c (gdb_wait.h): New include.
4202 (sys/wait.h): Do not include.
4204 2015-06-10 Simon Marchi <simon.marchi@ericsson.com>
4206 * dwarf2read.c (dwarf_record_line): Call dwarf_record_line if
4207 end_sequence is true.
4209 2015-06-10 Jan Kratochvil <jan.kratochvil@redhat.com>
4212 * solib-target.c (library_list_start_list): Use explicit NULL
4215 2015-06-10 Jan Kratochvil <jan.kratochvil@redhat.com>
4217 * solib-target.c (library_list_start_list): Do not dereference
4218 variable version in its initialization. Make the VERSION check handle
4220 (library_list_attributes): Make "version" GDB_XML_AF_OPTIONAL.
4222 2015-06-10 Gary Benson <gbenson@redhat.com>
4224 * NEWS: Announce support for direct access of executable and
4225 shared library files when attaching to inferiors in containers
4226 on GNU/Linux systems.
4228 2015-06-10 Gary Benson <gbenson@redhat.com>
4230 * remote.c (struct remote_state) <fs_pid>: New field.
4231 (new_remote_state): Initialize the above.
4232 (PACKET_vFile_setfs): New enum value.
4233 (remote_hostio_set_filesystem): New function.
4234 (remote_hostio_open): Call the above.
4235 (remote_hostio_unlink): Likewise.
4236 (remote_hostio_readlink): Likewise.
4237 (_initialize_remote): Register new "set/show remote
4238 hostio-setfs-packet" command.
4239 * NEWS: Announce new vFile:setfs packet.
4241 2015-06-10 Gary Benson <gbenson@redhat.com>
4243 * linux-nat.c (nat/linux-namespaces.h): New include.
4244 (fileio.h): Likewise.
4245 (linux_nat_filesystem_is_local): New function.
4246 (linux_nat_fileio_pid_of): Likewise.
4247 (linux_nat_fileio_open): Likewise.
4248 (linux_nat_fileio_readlink): Likewise.
4249 (linux_nat_fileio_unlink): Likewise.
4250 (linux_nat_add_target): Initialize to_filesystem_is_local,
4251 to_fileio_open, to_fileio_readlink and to_fileio_unlink.
4252 (_initialize_linux_nat): New "set/show debug linux-namespaces"
4254 * NEWS: Mention new "set/show debug linux-namespaces" commands.
4256 2015-06-10 Gary Benson <gbenson@redhat.com>
4258 * target.h (struct inferior): New forward declaration.
4259 (struct target_ops) <to_filesystem_is_local>: Update comment.
4260 (struct target_ops) <to_fileio_open>: New argument inf.
4261 Update comment. All implementations updated.
4262 (struct target_ops) <to_fileio_unlink>: Likewise.
4263 (struct target_ops) <to_fileio_readlink>: Likewise.
4264 (target_filesystem_is_local): Update comment.
4265 (target_fileio_open): New argument inf. Update comment.
4266 (target_fileio_unlink): Likewise.
4267 (target_fileio_readlink): Likewise.
4268 (target_fileio_read_alloc): Likewise.
4269 (target_fileio_read_stralloc): Likewise.
4270 * target.c (target_fileio_open): New argument inf.
4271 Pass inf to implementation. Update debug printing.
4272 (target_fileio_unlink): Likewise.
4273 (target_fileio_readlink): Likewise.
4274 (target_fileio_read_alloc_1): New argument inf. Pass inf
4275 to target_fileio_open.
4276 (target_fileio_read_alloc): New argument inf. Pass inf to
4277 target_fileio_read_alloc_1.
4278 (target_fileio_read_stralloc): Likewise.
4279 * gdb_bfd.c (inferior.h): New include.
4280 (gdb_bfd_iovec_fileio_open): Replace unused "open_closure"
4281 argument with new argument "inferior". Pass inferior to
4283 (gdb_bfd_open): Supply inferior argument to
4284 gdb_bfd_iovec_fileio_open.
4285 * linux-tdep.c (linux_info_proc): Supply inf argument to
4286 relevant target_fileio calls.
4287 (linux_find_memory_regions_full): Likewise.
4288 (linux_fill_prpsinfo): Likewise.
4289 * remote.c (remote_filesystem_is_local): Supply inf
4290 argument to remote_hostio_open.
4291 (remote_file_put): Likewise.
4292 (remote_file_get): Likewise.
4293 (remote_file_delete): Supply inf argument to
4294 remote_hostio_unlink.
4296 2015-06-10 Gary Benson <gbenson@redhat.com>
4298 * inf-child.c (inf_child_fileio_open): Replace comment.
4299 (inf_child_fileio_pwrite): Likewise.
4300 (inf_child_fileio_pread): Likewise.
4301 (inf_child_fileio_fstat): Insert blank line before comment.
4302 (inf_child_fileio_close): Replace comment.
4303 (inf_child_fileio_unlink): Likewise.
4304 (inf_child_fileio_readlink): Likewise.
4305 * remote.c (remote_hostio_open): Likewise.
4306 (remote_hostio_pread): Likewise.
4307 (remote_hostio_pwrite): Likewise.
4308 (remote_hostio_close): Likewise.
4309 (remote_hostio_unlink): Likewise.
4310 (remote_hostio_readlink): Likewise.
4311 (remote_hostio_fstat): Likewise.
4312 (remote_filesystem_is_local): Likewise.
4313 * target.c (target_fileio_open): Likewise.
4314 (target_fileio_pwrite): Likewise.
4315 (target_fileio_pread): Likewise.
4316 (target_fileio_fstat): Insert blank line before comment.
4317 (target_fileio_close): Replace comment.
4318 (target_fileio_unlink): Likewise.
4319 (target_fileio_readlink): Likewise.
4320 (target_fileio_read_alloc): Likewise.
4321 (target_fileio_read_stralloc): Likewise.
4323 2015-06-10 Gary Benson <gbenson@redhat.com>
4325 * linux-thread-db.c (nat/linux-namespaces.h): New include.
4326 (check_pid_namespace_match): Use linux_ns_same rather than
4327 linux_proc_pid_get_ns to spot PID namespace mismatches.
4328 * nat/linux-procfs.h (linux_proc_pid_get_ns): Remove.
4329 * nat/linux-procfs.c (linux_proc_pid_get_ns): Likewise.
4331 2015-06-10 Gary Benson <gbenson@redhat.com>
4333 * configure.ac (AC_CHECK_FUNCS): Add setns.
4334 * config.in: Regenerate.
4335 * configure: Likewise.
4336 * nat/linux-namespaces.h: New file.
4337 * nat/linux-namespaces.c: Likewise.
4338 * Makefile.in (HFILES_NO_SRCDIR): Add nat/linux-namespaces.h.
4339 (linux-namespaces.o): New rule.
4340 * config/aarch64/linux.mh (NATDEPFILES): Add linux-namespaces.o.
4341 * config/alpha/alpha-linux.mh (NATDEPFILES): Likewise.
4342 * config/arm/linux.mh (NATDEPFILES): Likewise.
4343 * config/i386/linux.mh (NATDEPFILES): Likewise.
4344 * config/i386/linux64.mh (NATDEPFILES): Likewise.
4345 * config/ia64/linux.mh (NATDEPFILES): Likewise.
4346 * config/m32r/linux.mh (NATDEPFILES): Likewise.
4347 * config/m68k/linux.mh (NATDEPFILES): Likewise.
4348 * config/mips/linux.mh (NATDEPFILES): Likewise.
4349 * config/pa/linux.mh (NATDEPFILES): Likewise.
4350 * config/powerpc/linux.mh (NATDEPFILES): Likewise.
4351 * config/powerpc/ppc64-linux.mh (NATDEPFILES): Likewise.
4352 * config/powerpc/spu-linux.mh (NATDEPFILES): Likewise.
4353 * config/s390/linux.mh (NATDEPFILES): Likewise.
4354 * config/sparc/linux.mh (NATDEPFILES): Likewise.
4355 * config/sparc/linux64.mh (NATDEPFILES): Likewise.
4356 * config/tilegx/linux.mh (NATDEPFILES): Likewise.
4357 * config/xtensa/linux.mh (NATDEPFILES): Likewise.
4359 2015-06-10 Gary Benson <gbenson@redhat.com>
4361 * utils.h (make_cleanup_close): Moved to common/filestuff.h.
4362 * utils.c (do_close_cleanup): Moved to common/filestuff.c.
4363 (make_cleanup_close): Likewise.
4364 * common/filestuff.h (make_cleanup_close): Moved from utils.h.
4365 * common/filestuff.c (do_close_cleanup): Moved from utils.c.
4366 (make_cleanup_close): Likewise.
4368 2015-06-03 Jon Turney <jon.turney@dronecode.org.uk>
4370 * windows-nat.c (thread_rec): Also ignore ERROR_INVALID_HANDLE
4371 from SuspendThread().
4373 2015-06-03 Jon Turney <jon.turney@dronecode.org.uk>
4375 * windows-nat.c (handle_output_debug_string): Trim trailing '\n'
4376 from OutputDebugString.
4378 2015-06-10 Walfred Tedeschi <walfred.tedeschi@intel.com>
4379 Mircea Gherzan <mircea.gherzan@intel.com>
4381 * i386-tdep.c (MPX_BASE_MASK, MPX_BD_MASK, MPX_BT_MASK, MPX_BD_MASK_32,
4382 MPX_BT_MASK_32): New macros.
4383 (i386_mpx_set_bounds): New function that implements
4384 the command "set-mpx-bound".
4385 (i386_mpx_enabled): Helper function to test MPX availability.
4386 (i386_mpx_bd_base): Helper function to calculate the base directory
4388 (i386_mpx_get_bt_entry): Helper function to access a bound
4390 (i386_mpx_print_bounds): Effectively display bound information.
4391 (_initialize_i386_tdep): Add new commands to commands "set mpx" and
4393 (_initialize_i386_tdep):
4394 Add "bound" to the commands "show mpx" and "set mpx" commands.
4395 (mpx_set_cmdlist and mpx_show_cmdlist): List for the new prefixed "set mpx"
4396 and "show mpx" commands.
4397 * NEWS: List new commands for MPX support.
4399 2015-06-09 Gary Benson <gbenson@redhat.com>
4401 * common/fileio.h (fileio_to_host_mode): New declaration.
4402 * common/fileio.c (fileio_to_host_mode): New Function.
4403 * inf-child.c (inf_child_fileio_open): Process mode argument
4404 with fileio_to_host_mode.
4406 2015-06-09 Gary Benson <gbenson@redhat.com>
4408 * common/fileio.c (fileio_mode_pack): Fix preprocessor
4411 2015-06-05 Gary Benson <gbenson@redhat.com>
4413 * gdb_bfd.c (gdb_bfd_open): Move vgdb special case to...
4414 * remote.c (remote_filesystem_is_local): ...here.
4416 2015-06-04 Yao Qi <yao.qi@linaro.org>
4418 * gdbarch.c: Regenerate it.
4420 2015-06-03 Jan Kratochvil <jan.kratochvil@redhat.com>
4422 * arch-utils.c (default_infcall_munmap): New.
4423 * arch-utils.h (default_infcall_munmap): New declaration.
4424 * compile/compile-object-load.c (struct munmap_list, munmap_list_add)
4425 (munmap_list_free, munmap_listp_free_cleanup): New.
4426 (struct setup_sections_data): Add field munmap_list_headp.
4427 (setup_sections): Call munmap_list_add.
4428 (compile_object_load): New variable munmap_list_head, initialize
4429 setup_sections_data.munmap_list_headp, return munmap_list_head.
4430 * compile/compile-object-load.h (struct munmap_list): New declaration.
4431 (struct compile_module): Add field munmap_list_head.
4432 (munmap_list_free): New declaration.
4433 * compile/compile-object-run.c (struct do_module_cleanup): Add field
4435 (do_module_cleanup): Call munmap_list_free.
4436 (compile_object_run): Pass munmap_list_head to do_module_cleanup.
4437 * gdbarch.c: Regenerate.
4438 * gdbarch.h: Regenerate.
4439 * gdbarch.sh (infcall_munmap): New.
4440 * linux-tdep.c (linux_infcall_munmap): New.
4441 (linux_init_abi): Install it.
4443 2015-06-02 Simon Marchi <simon.marchi@ericsson.com>
4446 * inferior.c (detach_inferior): Call exit_inferior_1 with silent = 0.
4448 2015-06-02 Yao Qi <yao.qi@linaro.org>
4450 * i386-linux-nat.c: Include linux-nat.h.
4452 2015-06-01 Andreas Schwab <schwab@linux-m68k.org>
4453 Jan Kratochvil <jan.kratochvil@redhat.com>
4456 * dwarf2-frame-tailcall.c (pretended_chain_levels): Correct
4458 * dwarf2loc.c (chain_candidate): Likewise.
4460 2015-06-01 Yao Qi <yao.qi@linaro.org>
4462 * arm-linux-nat.c (fetch_vfp_regs): Use PTRACE_GETREGSET.
4463 (store_vfp_regs): Use PTRACE_SETREGSET.
4465 2015-06-01 Yao Qi <yao.qi@linaro.org>
4467 * arm-linux-nat.c (fetch_fpregister): Use PTRACE_GETREGSET.
4468 (fetch_fpregs): Likewise.
4469 * arm-linux-nat.c (store_fpregister): Use PTRACE_SETREGSET.
4470 (store_fpregs): Likewise.
4472 2015-06-01 Yao Qi <yao.qi@linaro.org>
4474 * arm-linux-nat.c (fetch_register): Use PTRACE_GETREGSET.
4475 (fetch_regs): Likewise.
4476 (store_regs): Use PTRACE_SETREGSET.
4477 (store_register): Likewise.
4479 2015-06-01 Yao Qi <yao.qi@linaro.org>
4481 * arm-linux-nat.c (arm_linux_read_description): Check whether
4482 kernel supports PTRACE_GETREGSET.
4484 2015-06-01 Yao Qi <yao.qi@linaro.org>
4486 * x86-linux-nat.c (have_ptrace_getregset): Move it to ...
4487 * linux-nat.c: ... here.
4488 * x86-linux-nat.h (have_ptrace_getregset): Move the declaration
4490 * linux-nat.h: ... here.
4492 2015-06-01 Yao Qi <yao.qi@linaro.org>
4494 * amd64-linux-nat.c: Include "nat/linux-ptrace.h".
4495 * i386-linux-nat.c: Likewise.
4496 * nat/linux-ptrace.h (PTRACE_GETREGSET, PTRACE_SETREGSET): Define.
4497 * s390-linux-nat.c: Include "nat/linux-ptrace.h".
4498 (PTRACE_GETREGSET, PTRACE_SETREGSET): Remove.
4499 * x86-linux-nat.c: Include "nat/linux-ptrace.h".
4500 * x86-linux-nat.h (PTRACE_GETREGSET, PTRACE_SETREGSET): Remove.
4502 2015-05-30 Eli Zaretskii <eliz@gnu.org>
4504 * go32-nat.c (go32_xfer_memory): Fix the return value to be
4505 compatible to what read_child and write_child return. This
4506 unbreaks that DJGPP build of GDB which was broken since v7.7.
4508 2015-05-29 Martin Galvan <martin.galvan@tallertechnologies.com>
4510 * MAINTAINERS (Write After Approval): Add Martin Galvan.
4512 2015-05-29 Roland McGrath <mcgrathr@google.com>
4515 * osabi.c (generic_elf_osabi_sniff_abi_tag_sections): Use warning
4516 rather than internal_error for an unrecognized value.
4518 2015-05-29 Max Filippov <jcmvbkbc@gmail.com>
4520 * xtensa-tdep.c (xtensa_pseudo_register_read)
4521 (xtensa_pseudo_register_write): Don't alias last pseudo register
4524 2015-05-28 Don Breazeal <donb@codesourcery.com>
4526 * infrun.c (follow_fork_inferior): Ensure the use of
4527 process-style ptids (pid,0,0) in verbose/debug "Detaching"
4530 2015-05-28 Doug Evans <dje@google.com>
4532 * dwarf2read.c (record_line_ftype): Remove, duplicate.
4534 2015-05-28 Yao Qi <yao.qi@linaro.org>
4536 * arm-linux-nat.c (arm_linux_has_wmmx_registers): Remove.
4537 (arm_linux_fetch_inferior_registers): Use
4538 tdep->have_wmmx_registers instead of arm_linux_has_wmmx_registers.
4539 (arm_linux_store_inferior_registers): Likewise.
4540 (arm_linux_read_description): Don't set
4541 arm_linux_has_wmmx_registers.
4542 * arm-tdep.c (arm_gdbarch_init): Set
4543 tdep->have_wmmx_registers according target descriptions.
4544 * arm-tdep.h (struct gdbarch_tdep) <have_wmmx_registers>: New
4547 2015-05-28 Yao Qi <yao.qi@linaro.org>
4549 * arm-linux-nat.c (arm_linux_vfp_register_count): Remove.
4550 (fetch_vfp_regs): Use vfp_register_count from gdbarch_tdep
4551 instead of arm_linux_vfp_register_count.
4552 (store_vfp_regs): Likewise.
4553 (arm_linux_fetch_inferior_registers): Likewise.
4554 (arm_linux_store_inferior_registers): Likewise.
4555 (arm_linux_read_description): Don't set
4556 arm_linux_vfp_register_count.
4557 * arm-linux-tdep.c (arm_linux_iterate_over_regset_sections):
4559 * arm-tdep.c (arm_gdbarch_init): Add assert on
4561 * arm-tdep.h (struct gdbarch_tdep) <have_vfp_registers>: Rename
4562 field to vfp_register_count. All users updated.
4564 2015-05-28 Kyle Huey <me@kylehuey.com> (tiny patch)
4566 * gdb/arm-tdep.c (arm_gdbarch_init): Perform arm_abi detection on
4567 ELFOSABI_GNU binaries.
4569 2015-05-27 Doug Evans <dje@google.com>
4571 * dwarf2read.c (lnp_state_machine): New typedef.
4572 (lnp_reader_state): New typedef.
4573 (dwarf_record_line_1): Renamed from dwarf_record_line.
4574 All callers updated.
4575 (dwarf_record_line): New function.
4576 (init_lnp_state_machine): New function.
4577 (check_line_address): Replace p_record_line parameter with state.
4578 All callers updated.
4579 (dwarf_decode_lines_1): Call dwarf_record_line, init_lnp_state_machine.
4580 Update to record state in lnp_state_machine.
4582 2015-05-27 Doug Evans <dje@google.com>
4584 * dwarf2read.c (record_line_ftype): New typedef.
4585 (check_line_address): New function.
4586 (dwarf_decode_lines_1): Call it.
4588 2015-05-27 Doug Evans <dje@google.com>
4590 * NEWS: Mention "set debug dwarf-line".
4591 * dwarf2read.c (dwarf_line_debug): New static global.
4592 (add_include_dir): Add debug dwarf-line support.
4593 (add_file_name, dwarf_record_line, dwarf_finish_line): Ditto.
4594 (_initialize_dwarf2_read): New parameter "debug dwarf-line".
4596 2015-05-27 Doug Evans <dje@google.com>
4598 * cp-namespace.c (cp_lookup_nested_symbol): New arg "domain".
4599 All callers updated.
4600 (cp_lookup_nested_symbol_1, find_symbol_in_baseclass): Ditto.
4601 * cp-support.h (cp_lookup_nested_symbol): Update.
4603 2015-05-27 Doug Evans <dje@google.com>
4606 * block.c (block_find_symbol): New function.
4607 (block_find_non_opaque_type): Ditto.
4608 (block_find_non_opaque_type_preferred): Ditto.
4609 * block.h (block_symbol_matcher_ftype): New typedef.
4610 (block_find_symbol): Declare.
4611 (block_find_non_opaque_type): Ditto.
4612 (block_find_non_opaque_type_preferred): Ditto.
4613 * dwarf2read.c (dw2_lookup_symbol): Call block_find_symbol.
4614 * psymtab.c (psym_lookup_symbol): Ditto.
4615 * symtab.c (basic_lookup_transparent_type_1): New function.
4616 (basic_lookup_transparent_type): Call it.
4618 2015-05-27 Yao Qi <yao.qi@linaro.org>
4620 * aarch64-tdep.c (aarch64_record_data_proc_simd_fp): Return
4621 AARCH64_RECORD_UNKNOWN for unknown instruction encoding.
4623 2015-05-27 Yao Qi <yao.qi@linaro.org>
4625 * aarch64-tdep.c (aarch64_record_branch_except_sys): Split lines
4627 (aarch64_record_load_store): Likewise.
4629 2015-05-26 Doug Evans <dje@google.com>
4631 PR c++/18141, c++/18417.
4632 * cp-support.c (cp_lookup_rtti_type): Handle the case of NAME being
4635 2015-05-26 Doug Evans <dje@google.com>
4637 * NEWS: Add entries for command renamings.
4638 * dwarf2read.c (dwarf_read_debug): Renamed from dwarf2_read_debug.
4640 (dwarf_die_debug): Renamed from dwarf2_die_debug. All uses updated.
4641 (dwarf_max_cache_age): Renamed from dwarf2_max_cache_age.
4643 (show_dwarf_max_cache_age): Renamed from show_dwarf2_max_cache_age.
4644 All callers updated. Fix spelling of DWARF in help text.
4645 (set_dwarf_cmdlist): Renamed from set_dwarf2_cmdlist.
4647 (show_dwarf_cmdlist): Renamed from show_dwarf2_cmdlist.
4649 (set_dwarf_cmd): Renamed from set_dwarf2_cmd. All callers updated.
4650 (show_dwarf_cmd): Renamed from show_dwarf2_cmd. All callers updated.
4651 (dwarf_always_disassemble): Renamed from dwarf_always_disassemble.
4653 (show_dwarf_always_disassemble): Renamed from
4654 show_dwarf2_always_disassemble. All callers updated.
4655 (_initialize_dwarf2_read): Rename "set/show dwarf2" prefix to
4656 "set/show dwarf". Rename "set/show dwarf2 max-cache-age" to
4657 "set/show dwarf max-cache-age". Rename
4658 "set/show dwarf2 always-disassemble" to
4659 "set/show dwarf always-disassemble". Rename
4660 "set/show debug dwarf2-read" to "set/show debug dwarf-read". Rename
4661 "set/show debug dwarf2-die" to "set/show debug dwarf-die".
4663 2015-05-26 Doug Evans <dje@google.com>
4666 * python/py-lazy-string.c (stpy_convert_to_value): Use
4667 gdbpy_gdb_memory_error not PyExc_MemoryError.
4668 (gdbpy_create_lazy_string_object): Ditto.
4670 2015-05-26 Andrew Burgess <andrew.burgess@embecosm.com>
4672 * tui/tui-regs.c (tui_reg_next_command): Compare against NULL.
4674 2015-05-26 Andrew Burgess <andrew.burgess@embecosm.com>
4676 * tui/tui-regs.c (tui_reg_prev_command): New function.
4677 (_initialize_tui_regs): Add 'prev' command for 'tui reg'.
4678 * reggroups.c (reggroup_prev): New function.
4679 * reggroups.h (reggroup_prev): Add declaration. Update comment.
4681 2015-05-26 Omair Javaid <omair.javaid@linaro.org>
4682 Yao Qi <yao.qi@linaro.org>
4684 * aarch64-linux-tdep.c: Include linux-record.h and
4686 (struct linux_record_tdep aarch64_linux_record_tdep): Declare.
4687 (aarch64_syscall): New enum.
4688 (aarch64_canonicalize_syscall): New function.
4689 (aarch64_all_but_pc_registers_record): New function.
4690 (aarch64_linux_syscall_record): New function.
4691 (aarch64_linux_init_abi): Install AArch64 process record
4692 handler. Update to handle syscall recording.
4693 * aarch64-tdep.c: Include record.h and record-full.h.
4694 (submask, bit, bits, REG_ALLOC, MEM_ALLOC): New macros.
4695 (struct aarch64_mem_r): Define.
4696 (aarch64_record_result): New enum.
4697 (struct insn_decode_record): Define.
4698 (insn_decode_record): New typedef.
4699 (aarch64_record_data_proc_reg): New function.
4700 (aarch64_record_data_proc_imm): New function.
4701 (aarch64_record_branch_except_sys): New function.
4702 (aarch64_record_load_store): New function.
4703 (aarch64_record_data_proc_simd_fp): New function.
4704 (aarch64_record_asimd_load_store): New function.
4705 (aarch64_record_decode_insn_handler): New function.
4706 (deallocate_reg_mem): New function.
4707 (aarch64_process_record): New function.
4708 * aarch64-tdep.h (struct gdbarch_tdep) <aarch64_syscall_record>:
4710 (aarch64_process_record): New extern declaration.
4711 * configure.tgt: Add linux-record.o to gdb_target_obs.
4712 * linux-record.h (struct linux_record_tdep) <arg7>: New field.
4714 2015-05-26 Omair Javaid <omair.javaid@linaro.org>
4716 * NEWS: Add a note on process record-replay support on aarch64*-linux*
4719 2015-05-26 Martin Galvan <martin.galvan@tallertechnologies.com>
4721 * amd64-tdep.c: Replace in_function_epilogue_p with
4722 stack_frame_destroyed_p throughout.
4723 * arch-utils.c: Ditto.
4724 * arch-utils.h: Ditto.
4725 * arm-tdep.c: Ditto.
4726 * breakpoint.c: Ditto.
4727 * gdbarch.sh: Ditto.
4728 * hppa-tdep.c: Ditto.
4729 * i386-tdep.c: Ditto.
4730 * mips-tdep.c: Ditto.
4731 * nios2-tdep.c: Ditto.
4732 * rs6000-tdep.c: Ditto.
4733 * s390-linux-tdep.c: Ditto.
4734 * score-tdep.c: Ditto.
4736 * sparc-tdep.c: Ditto.
4737 * sparc-tdep.h: Ditto.
4738 * sparc64-tdep.c: Ditto.
4739 * spu-tdep.c: Ditto.
4740 * tic6x-tdep.c: Ditto.
4741 * tilegx-tdep.c: Ditto.
4742 * xstormy16-tdep.c: Ditto.
4743 * gdbarch.c, gdbarch.h: Re-generated.
4745 2015-05-22 Andrew Burgess <andrew.burgess@embecosm.com>
4747 * NEWS: Mention 'tui enable' and 'tui disable'.
4748 * tui/tui.c (tui_enable_command): New function.
4749 (tui_disable_command): New function.
4750 (_initialize_tui): New function.
4752 2015-05-21 Andrew Burgess <andrew.burgess@embecosm.com>
4754 * tui/tui-regs.c (tui_reg_next_command): Use NULL not 0.
4756 2015-05-21 Andrew Burgess <andrew.burgess@embecosm.com>
4758 * tui/tui-layout.c (tui_set_layout_for_display_command): Ensure
4761 2015-05-21 Andrew Burgess <andrew.burgess@embecosm.com>
4763 * tui/tui-layout.c (tui_layout_command): Move call to tui_enable
4765 (tui_set_layout_for_display_command): ...here, before calling
4766 tui_set_layout. Only set the layout if gdb has not already
4767 entered the TUI_FAILURE state.
4769 2015-05-21 Andrew Burgess <andrew.burgess@embecosm.com>
4771 * tui/tui-layout.c (layout_completer): New function.
4772 (_initialize_tui_layout): Set completer on layout command.
4774 2015-05-21 Andrew Burgess <andrew.burgess@embecosm.com>
4776 * tui/tui-layout.c (tui_set_layout): Remove
4777 tui_register_display_type parameter. Remove all checking of this
4778 parameter, and reindent function. Update header comment.
4779 (tui_set_layout_for_display_command): Rename to...
4780 (tui_set_layout_by_name): ...this, and don't check for different
4781 register class types, don't pass a tui_register_display_type to
4782 tui_set_layout. Update header comment.
4783 (layout_names): Remove register set specific names.
4784 * tui/tui-layout.h (tui_set_layout): Remove
4785 tui_register_display_type parameter.
4786 * tui/tui.c (tui_rl_change_windows): Don't pass a
4787 tui_register_display_type to tui_set_layout.
4788 (tui_rl_delete_other_windows): Likewise.
4789 (tui_enable): Likewise.
4790 * tui/tui-data.h (TUI_FLOAT_REGS_NAME): Remove.
4791 (TUI_FLOAT_REGS_NAME_LOWER): Remove.
4792 (TUI_GENERAL_REGS_NAME): Remove.
4793 (TUI_GENERAL_REGS_NAME_LOWER): Remove.
4794 (TUI_SPECIAL_REGS_NAME): Remove.
4795 (TUI_SPECIAL_REGS_NAME_LOWER): Remove.
4796 (TUI_GENERAL_SPECIAL_REGS_NAME): Remove.
4797 (TUI_GENERAL_SPECIAL_REGS_NAME_LOWER): Remove.
4798 (enum tui_register_display_type): Remove.
4799 (struct tui_layout_def): Remove regs_display_type and
4800 float_regs_display_type fields.
4801 (struct tui_data_info): Remove regs_display_type field.
4802 (tui_layout_command): Use new name for
4803 tui_set_layout_for_display_command.
4804 * tui/tui-data.c (layout_def): Don't initialise removed fields.
4805 (tui_clear_win_detail): Don't initialise removed fields of
4807 * tui/tui-regs.c (tui_show_registers): Use new name for
4808 tui_set_layout_for_display_command.
4809 * tui/tui.h (tui_set_layout_for_display_command): Rename
4811 (tui_set_layout_by_name): ...this.
4812 * printcmd.c (display_command): Remove tui related layout call,
4815 2015-05-20 Joel Brobecker <brobecker@adacore.com>
4817 * infrun.c (handle_inferior_event_1): Renames handle_inferior_event.
4818 (handle_inferior_event): New function.
4820 2015-05-20 Joel Brobecker <brobecker@adacore.com>
4822 * ada-lang.c (to_fixed_array_type): Rename local variable
4823 typename into type_name.
4825 2015-05-19 Jan Kratochvil <jan.kratochvil@redhat.com>
4827 Fix ASAN crash for gdb.compile/compile.exp.
4828 * infcall.c (call_function_by_hand_dummy): Use xstrdup for NAME.
4830 2015-05-19 Jan Kratochvil <jan.kratochvil@redhat.com>
4832 * compile/compile-c-symbols.c (convert_symbol_sym, gcc_convert_symbol)
4833 (gcc_symbol_address): Change gdb_stdout to gdb_stdlog.
4834 * compile/compile-object-load.c (setup_sections, compile_object_load):
4836 * compile/compile.c (compile_to_object): Likewise.
4838 2015-05-16 Doug Evans <xdje42@gmail.com>
4840 * NEWS: Mention support for unbuffered Guile memory ports.
4841 * scm-ports.c (ioscm_memory_port): Update comments on end, size.
4842 (ioscm_lseek_address): Improve overflow calculation.
4843 (gdbscm_memory_port_fill_input): Add assert.
4844 (gdbscm_memory_port_write): Handle unbuffered ports.
4845 Handle large writes identical to Guile's fport_write.
4846 (gdbscm_memory_port_seek): Fix seeking past end check.
4847 (gdbscm_memory_port_close): Handle closing unbuffered port.
4848 (ioscm_parse_mode_bits): Recognize "0" for unbuffered ports.
4849 (ioscm_init_memory_port): Handle unbuffered ports.
4850 (ioscm_reinit_memory_port): Ditto.
4851 (ioscm_init_memory_port): Update size calculation.
4852 (gdbscm_open_memory): Support zero sized ports.
4854 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
4856 * compile/compile-object-load.c (get_out_value_type): Fix uninitialized
4857 variable compiler warnings.
4859 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
4861 * compile/compile-object-load.c (get_out_value_type): Fix returned type.
4863 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
4864 Phil Muldoon <pmuldoon@redhat.com>
4866 * NEWS (Changes since GDB 7.9): Add compile print.
4867 * compile/compile-c-support.c (add_code_header, add_code_footer)
4868 (c_compute_program): Add COMPILE_I_PRINT_ADDRESS_SCOPE and
4869 COMPILE_I_PRINT_VALUE_SCOPE.
4870 * compile/compile-internal.h (COMPILE_I_PRINT_OUT_ARG_TYPE)
4871 (COMPILE_I_PRINT_OUT_ARG, COMPILE_I_EXPR_VAL, COMPILE_I_EXPR_PTR_TYPE):
4873 * compile/compile-object-load.c: Include block.h.
4874 (get_out_value_type): New function.
4875 (compile_object_load): Handle COMPILE_I_PRINT_ADDRESS_SCOPE and
4876 COMPILE_I_PRINT_VALUE_SCOPE. Set compile_module's OUT_VALUE_ADDR and
4878 * compile/compile-object-load.h (struct compile_module): Add fields
4879 out_value_addr and out_value_type.
4880 * compile/compile-object-run.c: Include valprint.h and compile.h.
4881 (struct do_module_cleanup): Add fields out_value_addr and
4883 (do_module_cleanup): Handle COMPILE_I_PRINT_ADDRESS_SCOPE and
4884 COMPILE_I_PRINT_VALUE_SCOPE.
4885 (compile_object_run): Propagate out_value_addr and out_value_type.
4886 Pass OUT_VALUE_ADDR.
4887 * compile/compile.c: Include valprint.h.
4888 (compile_print_value, compile_print_command): New functions.
4889 (eval_compile_command): Handle failed COMPILE_I_PRINT_ADDRESS_SCOPE.
4890 (_initialize_compile): Update compile code help text. Install
4891 compile_print_command.
4892 * compile/compile.h (compile_print_value): New prototype.
4893 * defs.h (enum compile_i_scope_types): Add
4894 COMPILE_I_PRINT_ADDRESS_SCOPE and COMPILE_I_PRINT_VALUE_SCOPE.
4896 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
4898 * compile/compile-object-load.c (get_regs_type): Add parameter func_sym.
4899 Rely on its parameter count.
4900 (compile_object_load): Replace lookup_minimal_symbol_text by
4901 lookup_global_symbol_from_objfile. Verify FUNC_SYM. Set it in the
4903 * compile/compile-object-load.h (struct compile_module): Replace
4904 func_addr by func_sym.
4905 * compile/compile-object-run.c: Include block.h.
4906 (compile_object_run): Reset module variable after it is freed. Use
4907 FUNC_SYM instead of FUNC_ADDR. Rely on it.
4909 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
4911 * compile/compile-c-support.c (print_one_macro): Use #ifndef.
4912 (generate_register_struct): Use __gdb_uintptr for TYPE_CODE_PTR.
4913 (c_compute_program): Call generate_register_struct after typedefs.
4914 * compile/compile-loc2c.c (push, pushf_register_address)
4915 (pushf_register): Cast to GCC_UINTPTR.
4916 (do_compile_dwarf_expr_to_c): Use unused attribute. Add space after
4917 type. Use GCC_UINTPTR instead of void *. Remove excessive cast.
4918 (compile_dwarf_expr_to_c): Use GCC_UINTPTR instead of void *.
4919 * compile/compile.c (_initialize_compile): Enable warnings for
4922 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
4924 * cli/cli-script.c (execute_control_command): Update
4925 eval_compile_command caller.
4926 * compile/compile-object-load.c (compile_object_load): Add parameters
4927 scope and scope_data. Set them.
4928 * compile/compile-object-load.h (struct compile_module): Add fields
4929 scope and scope_data.
4930 (compile_object_load): Add parameters scope and scope_data.
4931 * compile/compile-object-run.c (struct do_module_cleanup): Add fields
4932 scope and scope_data.
4933 (compile_object_run): Propagate the fields scope and scope_data.
4934 * compile/compile.c (compile_file_command, compile_code_command):
4935 Update eval_compile_command callers.
4936 (eval_compile_command): Add parameter scope_data. Pass it plus scope.
4937 * compile/compile.h (eval_compile_command): Add parameter scope_data.
4938 * defs.h (struct command_line): Add field scope_data.
4940 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
4942 * printcmd.c (struct format_data): Move it to valprint.h.
4943 (print_command_parse_format, print_value): New functions from ...
4944 (print_command_1): ... here. Call them.
4945 * valprint.h (struct format_data): Move it here from printcmd.c.
4946 (print_command_parse_format, print_value): New declarations.
4948 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
4950 * compile/compile-object-load.c (compile_object_load): Add
4951 COMPILE_DEBUG message.
4953 2015-05-15 Jerome Guitton <guitton@adacore.com>
4955 * ada-lang.c (ada_value_ptr_subscript): Use enum position of
4956 index to get element instead of enum value.
4957 (ada_value_slice_from_ptr, ada_value_slice): Use enum position
4958 of index to compute length, but enum values to compute bounds.
4959 (ada_array_length): Use enum position of index instead of enum value.
4960 (pos_atr): Move position computation to...
4961 (ada_evaluate_subexp): Use enum values to compute bounds.
4962 * gdbtypes.c (discrete_position): ...this new function.
4963 * gdbtypes.h (discrete_position): New function declaration.
4964 * valprint.c (val_print_array_elements): Call discrete_position
4965 to handle array indexed by non-contiguous enumeration types.
4967 2015-05-15 Jerome Guitton <guitton@adacore.com>
4969 * ada-lang.c (find_parallel_type_by_descriptive_type):
4970 Go through typedefs during lookup.
4971 (to_fixed_array_type): Add support for non-bit packed arrays
4972 as variable-length fields.
4974 2015-05-15 Pedro Alves <palves@redhat.com>
4975 Simon Marchi <simon.marchi@ericsson.com>
4977 * event-loop.c (gdb_notifier) <next_file_handler,
4978 next_poll_fds_index>: New fields.
4979 (get_next_file_handler_to_handle_and_advance): New function.
4980 (delete_file_handler): If deleting the next file handler to
4981 handle, advance to the next file handler.
4982 (gdb_wait_for_event): Bail early if no event fired. Poll file
4983 handlers in round-robin fashion.
4985 2015-05-15 Pedro Alves <palves@redhat.com>
4987 * linux-tdep.c (linux_find_memory_regions_full): Rename local
4988 'private' to 'priv'.
4990 2015-05-15 Pedro Alves <palves@redhat.com>
4992 * nat/linux-nat.h: Include "target/waitstatus.h".
4994 2015-05-15 Yuanhui Zhang <asmwarrior@gmail.com>
4996 * python/py-unwind.c (struct reg_info): Move out of ...
4997 (struct cached_frame_info): ... this scope.
4998 (pending_frame_object_type, unwind_info_object_type): Make extern.
5000 2015-05-15 Joel Brobecker <brobecker@adacore.com>
5002 * ada-lang.c (ada_value_primitive_packed_val): Make sure
5003 accumSize is never negative.
5005 2015-05-14 Patrick Palka <patrick@parcs.ath.cx>
5007 * tui/tui-command.c: Remove include of <ctype.h>.
5008 (tui_dispatch_ctrl_char): Remove workaround for xterm terminals.
5010 2015-05-13 Martin Galvan <martin.galvan@tallertechnologies.com>
5012 * dwarf2read.c (die_needs_namespace): Return 1 for
5013 DW_TAG_inlined_subroutine.
5015 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
5017 * regcache.c (regcache_cpy_no_passthrough): New declaration.
5018 (regcache_cpy_no_passthrough): Make it static, add function comment.
5019 * regcache.h (regcache_dup, regcache_cpy): Reduce/update their comment.
5020 (regcache_cpy_no_passthrough): Remove declaration.
5022 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
5024 * gdbthread.h (struct thread_control_state): Update comment for
5026 * infcall.c (run_inferior_call): Update comment about
5028 * infcmd.c (get_return_value): Update comment about stop_registers.
5029 (finish_forward): Update comment about proceed_to_finish.
5030 * infrun.c (stop_registers): Remove.
5031 (clear_proceed_status, normal_stop): Remove stop_registers handling.
5032 * infrun.h (stop_registers): Remove.
5034 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
5036 * infcall.c (struct dummy_frame_context_saver)
5037 (dummy_frame_context_saver_data_free, dummy_frame_context_saver_dtor)
5038 (dummy_frame_context_saver_drop, dummy_frame_context_saver_cleanup)
5039 (dummy_frame_context_saver_get_regs, dummy_frame_context_saver_setup):
5041 (call_function_by_hand_dummy): Move discard_cleanups of
5042 inf_status_cleanup before dummy_frame_push. Call
5043 dummy_frame_context_saver_setup and prepare context_saver_cleanup.
5044 Use dummy_frame_context_saver_get_regs instead of stop_registers.
5045 * infcall.h (struct dummy_frame_context_saver)
5046 (dummy_frame_context_saver_drop, dummy_frame_context_saver_cleanup)
5047 (dummy_frame_context_saver_get_regs, dummy_frame_context_saver_setup):
5049 * infcmd.c: Include infcall.h.
5050 (get_return_value): Add parameter ctx_saver, use it instead of
5052 (print_return_value): Add parameter ctx_saver, pass it.
5053 (struct finish_command_continuation_args): Add field ctx_saver.
5054 (finish_command_continuation): Update print_return_value caller.
5055 (finish_command_continuation_free_arg): Free also ctx_saver.
5056 (finish_forward): Call dummy_frame_context_saver_setup.
5057 * inferior.h (struct dummy_frame_context_saver): New declaration.
5058 (get_return_value): Add parameter ctx_saver.
5059 * python/py-finishbreakpoint.c (bpfinishpy_pre_stop_hook): Update
5060 get_return_value caller.
5062 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
5064 * dummy-frame.c (struct dummy_frame_dtor_list): New.
5065 (struct dummy_frame): Replace dtor and dtor_data by dtor_list.
5066 (remove_dummy_frame): Process dtor_list.
5067 (pop_dummy_frame): Process dtor_list.
5068 (register_dummy_frame_dtor): Maintain dtor_list.
5069 (find_dummy_frame_dtor): Handle dtor_list.
5070 * dummy-frame.h (register_dummy_frame_dtor, find_dummy_frame_dtor):
5073 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
5075 * compile/compile-object-run.c (do_module_cleanup): Add parameter
5077 (compile_object_run): Update do_module_cleanup caller.
5078 * dummy-frame.c: Include infcall.h.
5079 (struct dummy_frame): Update dtor comment.
5080 (remove_dummy_frame): Call dtor.
5081 (pop_dummy_frame): Update dtor caller.
5082 * dummy-frame.h (dummy_frame_dtor_ftype): Add parameter
5085 2015-05-13 Joel Brobecker <brobecker@adacore.com>
5089 2015-05-13 Joel Brobecker <brobecker@adacore.com>
5091 * NEWS: Create "Changes in GDB 7.9.1" section. Move news about
5092 Xmethods now being able to specify a result type to that new
5095 2015-05-13 Patrick Palka <patrick@parcs.ath.cx>
5097 * tui/tui-win.c (tui_async_resize_screen): Clear win_resized
5098 first before resizing the window.
5099 * tui/tui.c (tui_enable): Likewise.
5101 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
5103 * dummy-frame.c (struct dummy_frame): Use proper typedef for dtor.
5104 * dummy-frame.h (dummy_frame_dtor_ftype): Add its comment.
5105 * infcall.c (call_function_by_hand_dummy): Use proper typedef for
5106 dummy_dtor parameter.
5107 * infcall.h: Include dummy-frame.h.
5108 (call_function_by_hand_dummy_dtor_ftype): Remove.
5109 (call_function_by_hand_dummy): Use proper typedef for dummy_dtor
5112 2015-05-13 Patrick Palka <patrick@parcs.ath.cx>
5115 * top.c (history_size_setshow_var): Change type to signed.
5116 Initialize to -2. Update documentation.
5117 (set_readline_history_size): Define.
5118 (set_history_size_command): Use it. Remove logic for handling
5120 (init_history): Use set_readline_history_size(). Test for a
5121 value of -2 instead of 0 when determining whether to set a
5122 default history size.
5123 (init_main): Decode the argument of the "size" command as a
5124 zuinteger_unlimited.
5126 2015-05-12 Doug Evans <dje@google.com>
5128 * dwarf2read.c (struct file_entry): Tweak comments.
5129 (get_debug_line_section): Tweak comments.
5131 2015-05-12 Don Breazeal <donb@codesourcery.com>
5133 * NEWS: Announce fork support in the RSP and support
5134 for fork debugging in extended mode.
5136 2015-05-12 Don Breazeal <donb@codesourcery.com>
5138 * remote.c (remote_insert_fork_catchpoint): New function.
5139 (remote_remove_fork_catchpoint): New function.
5140 (remote_insert_vfork_catchpoint): New function.
5141 (remote_remove_vfork_catchpoint): New function.
5142 (pending_fork_parent_callback): New function.
5143 (remove_new_fork_child): New function.
5144 (remote_update_thread_list): Call remote_notif_get_pending_events
5145 and remove_new_fork_child.
5146 (extended_remote_kill): Kill fork child when killing the
5147 parent before follow_fork completes.
5148 (init_extended_remote_ops): Initialize target vector with
5149 new fork catchpoint functions.
5151 2015-05-12 Don Breazeal <donb@codesourcery.com>
5153 * remote.c (remove_vfork_event_p): New function.
5154 (remote_follow_fork): Add vfork event type to event checking.
5155 (remote_parse_stop_reply): New stop reasons "vfork" and
5156 "vforkdone" for RSP 'T' Stop Reply Packet.
5158 2015-05-12 Don Breazeal <donb@codesourcery.com>
5160 * linux-nat.c (linux_nat_ptrace_options): New function.
5161 (linux_init_ptrace, wait_lwp, linux_nat_filter_event):
5162 Call linux_nat_ptrace_options and use different argument to
5163 linux_enable_event_reporting.
5164 (_initialize_linux_nat): Delete call to
5165 linux_ptrace_set_additional_flags.
5166 * nat/linux-ptrace.c (current_ptrace_options): Rename to
5167 supported_ptrace_options.
5168 (additional_flags): Delete variable.
5169 (linux_check_ptrace_features): Use supported_ptrace_options.
5170 (linux_test_for_tracesysgood, linux_test_for_tracefork):
5171 Likewise, and remove additional_flags check.
5172 (linux_enable_event_reporting): Change 'attached' argument to
5173 'options'. Use supported_ptrace_options.
5174 (ptrace_supports_feature): Change comment. Use
5175 supported_ptrace_options.
5176 (linux_ptrace_set_additional_flags): Delete function.
5177 * nat/linux-ptrace.h (linux_ptrace_set_additional_flags):
5178 Delete function prototype.
5179 * remote.c (remote_fork_event_p): New function.
5180 (remote_detach_pid): New function.
5181 (remote_detach_1): Call remote_detach_pid, don't mourn inferior
5182 if doing detach-on-fork.
5183 (remote_follow_fork): New function.
5184 (remote_parse_stop_reply): Handle new "T" stop reason "fork".
5185 (remote_pid_to_str): Print "process" strings for pid/0/0 ptids.
5186 (init_extended_remote_ops): Initialize to_follow_fork.
5188 2015-05-12 Don Breazeal <donb@codesourcery.com>
5190 * nat/linux-ptrace.c (linux_check_ptrace_features): Change
5191 from static to extern.
5192 * nat/linux-ptrace.h (linux_check_ptrace_features): Declare.
5193 * remote.c (anonymous enum): <PACKET_fork_event_feature,
5194 * PACKET_vfork_event_feature>: New enumeration constants.
5195 (remote_protocol_features): Add table entries for new packets.
5196 (remote_query_supported): Add new feature queries to qSupported
5199 2015-05-12 Gary Benson <gbenson@redhat.com>
5201 * remote.c (remote_add_inferior): Call exec_file_locate_attach
5202 for fake PIDs as well as real ones.
5203 (remote_pid_to_exec_file): Send empty annex if PID is fake.
5205 2015-05-09 Siva Chandra Reddy <sivachandra@google.com>
5207 * NEWS (Python Scripting): Mention the new gdb.Value methods.
5208 * python/py-value.c (valpy_reference_value): New function.
5209 (valpy_const_value): Likewise.
5210 (value_object_methods): Add new methods.
5211 * value.c (make_cv_value): New function.
5212 * value.h (make_cv_value): Declare.
5214 2015-05-08 Yao Qi <yao@codesourcery.com>
5215 Sandra Loosemore <sandra@codesourcery.com>
5217 * dwarf2read.c (setup_type_unit_groups): Do NULL pointer check
5218 to 'lh->include_dirs' before accessing to it.
5219 (psymtab_include_file_name): Likewise.
5220 (dwarf_decode_lines_1): Likewise.
5221 (dwarf_decode_lines): Likewise.
5222 (file_file_name): Likewise.
5224 2015-05-08 Sandra Loosemore <sandra@codesourcery.com>
5226 * nios2-linux-tdep.c (NIOS2_SIGRETURN_TRAMP_ADDR): Define.
5227 (NIOS2_SIGRETURN_REGSAVE_OFFSET): Define.
5228 (nios2_linux_rt_sigreturn_init): Adjust base address of
5231 2015-05-08 Sandra Loosemore <sandra@codesourcery.com>
5233 * nios2-tdep.c (nios2_breakpoint_from_pc): Revert to using
5234 "trap 31" as the breakpoint instruction on all targets.
5236 2015-05-08 Jan Kratochvil <jan.kratochvil@redhat.com>
5238 * infcmd.c (print_return_value): Remove unused declaration.
5240 2015-05-08 Joel Brobecker <brobecker@adacore.com>
5242 * dwarf2read.c (attr_to_dynamic_prop)
5243 <DW_AT_data_member_location>: Use read_type_die isntead of
5246 2015-05-08 Joel Brobecker <brobecker@adacore.com>
5248 * ada-lang.c (ada_convert_actual): Add handling of formals
5249 passed inside an aligner type.
5251 2015-05-08 Joel Brobecker <brobecker@adacore.com>
5253 * copyright.py (NOT_FSF_LIST): Remove sim/erc32 entries.
5255 2015-05-08 Siva Chandra Reddy <sivachandra@google.com>
5258 * python/lib/gdb/command/xmethods.py (print_xm_info): Fix typo.
5259 Print xmethod matcher status.
5261 2015-05-08 Andreas Arnez <arnez@linux.vnet.ibm.com>
5263 * s390-linux-nat.c (fill_gregset): Avoid relying on the PSWA
5264 register in the regcache when treating the PSWM register, and vice
5267 2015-05-07 Gary Benson <gbenson@redhat.com>
5269 * linux-thread-db.c (struct thread_db_info)
5270 <td_ta_map_id2thr_p>: Remove field.
5271 (try_thread_db_load_1): Remove initialization for the above.
5273 2015-05-07 Gary Benson <gbenson@redhat.com>
5275 * linux-thread-db.c (struct thread_db_info)
5276 <td_thr_validate_p>: Remove field.
5277 (try_thread_db_load_1): Remove initialization for the above.
5279 2015-05-06 Jan Kratochvil <jan.kratochvil@redhat.com>
5281 * compile/compile-object-load.c (compile_object_load): Support
5284 2015-05-06 Jan Kratochvil <jan.kratochvil@redhat.com>
5286 * compile/compile.c (compile_to_object): Make the cmd_string parameter
5287 const. Use new variables for the const compatibility.
5288 (eval_compile_command): Make the cmd_string parameter const.
5289 * compile/compile.h (eval_compile_command): Make the cmd_string
5292 2015-05-06 Joel Brobecker <brobecker@adacore.com>
5294 * defs.h (deprecated_init_ui_hook): Delete. Remove associated
5296 * top.c (deprecated_init_ui_hook): Delete.
5297 (gdb_init): Remove handling of deprecated_init_ui_hook.
5298 * interps.c (clear_interpreter_hooks): Remove handling of
5299 deprecated_init_ui_hook.
5300 * main.c (captured_main): Update comment.
5302 2015-05-06 Joel Brobecker <brobecker@adacore.com>
5304 * solib.c (_initialize_solib): Add "info dll" alias creation.
5305 * windows-nat.c (set_windows_aliases): Delete.
5306 (_initialize_windows_nat): Remove deprecated_init_ui_hook
5308 * NEWS: Add news entry about "info dll" now being available
5311 2015-05-05 Joel Brobecker <brobecker@adacore.com>
5313 * ada-lang.c (value_assign_to_component): Reformat and improve
5314 documentation. Remove all trailing spaces.
5316 2015-05-05 Joel Brobecker <brobecker@adacore.com>
5318 * inline-frame.c (inline_frame_sniffer, skip_inline_frames):
5319 Stop counting inlined frames as soon as an out-of-line function
5322 2014-05-05 Pierre-Marie de Rodat <derodat@adacore.com>
5324 * dwarf2read.c (inherit_abstract_dies): Skip
5325 DW_TAG_GNU_call_site dies while inheriting children of an
5326 abstract DIE into a scope.
5327 (read_lexical_block_scope): Inherit abstract DIE's for
5330 2015-05-05 Joel Brobecker <brobecker@adacore.com>
5332 * ada-valprint.c (val_print_packed_array_elements): Delete
5333 variable "len". Add a type-length check when comparing two
5334 consecutive elements of the array. Use the element's actual
5335 length in call to value_contents_eq.
5336 * ada-lang.c (ada_value_primitive_packed_val): Always return
5337 a value whose type has been resolved.
5339 2015-05-05 Joel Brobecker <brobecker@adacore.com>
5341 * ada-lang.c (ada_value_primitive_packed_val): Recompute
5342 BIT_SIZE and LEN if the size of the resolved type is smaller
5343 than BIT_SIZE * HOST_CHAR_BIT.
5345 2015-05-05 Joel Brobecker <brobecker@adacore.com>
5347 * ada-lang.c (ada_value_primitive_packed_val): Use a more
5348 correct address in call to value_at. Adjust call to
5349 value_address accordingly.
5351 2015-05-05 Joel Brobecker <brobecker@adacore.com>
5353 * ada-valprint.c (ada_val_print_1): Resolve TYPE before trying
5356 2015-05-05 Joel Brobecker <brobecker@adacore.com>
5358 * dwarf2loc.h (struct property_addr_info): Add "valaddr" field.
5359 * dwarf2loc.c (dwarf2_evaluate_property): Add handling of
5361 * gdbtypes.h (resolve_dynamic_type): Add "valaddr" parameter.
5362 * gdbtypes.c (resolve_dynamic_struct): Set pinfo.valaddr.
5363 (resolve_dynamic_type_internal): Set pinfo.valaddr.
5364 Add handling of addr_stack->valaddr.
5365 (resolve_dynamic_type): Add "valaddr" parameter.
5366 Set pinfo.valaddr field.
5367 * ada-lang.c (ada_discrete_type_high_bound): Update call to
5368 resolve_dynamic_type.
5369 (ada_discrete_type_low_bound): Likewise.
5370 * findvar.c (default_read_var_value): Likewise.
5371 * value.c (value_from_contents_and_address): Likewise.
5373 2015-05-05 Joel Brobecker <brobecker@adacore.com>
5375 * gdbtypes.c (resolve_dynamic_array): Use
5376 create_array_type_with_stride instead of create_array_type.
5378 2015-04-30 DJ Delorie <dj@redhat.com>
5380 * rl78-tdep.c (rl78_analyze_prologue): Pass RL78_ISA_DEFAULT to
5383 2015-04-29 Doug Evans <dje@google.com>
5386 * NEWS: Document new gdb.XMethodWorker.get_result_type method.
5387 * eval.c (evaluate_subexp_standard) <OP_FUNCALL>: Handle
5388 EVAL_AVOID_SIDE_EFFECTS for xmethods.
5389 * extension-priv.h (struct extension_language_ops)
5390 <get_xmethod_result_type>: New member.
5391 * extension.c (get_xmethod_result_type): New function.
5392 * extension.h (get_xmethod_result_type): Declare.
5393 * python/py-xmethods.c (get_result_type_method_name): New static
5395 (py_get_result_type_method_name): Ditto.
5396 (gdbpy_get_xmethod_result_type): New function.
5397 (gdbpy_initialize_xmethods): Initialize py_get_result_type_method_name.
5398 * python/python-internal.h (gdbpy_get_xmethod_result_type): Declare.
5399 * python/python.c (python_extension_ops): Add
5400 gdbpy_get_xmethod_result_type.
5401 * python/lib/gdb/xmethod.py (XMethodWorker): Add get_result_type.
5402 * valarith.c (value_x_binop): Handle EVAL_AVOID_SIDE_EFFECTS for
5404 (value_x_unop): Ditto.
5405 * value.c (result_type_of_xmethod): New function.
5406 * value.h (result_type_of_xmethod): Declare.
5408 2015-04-29 Gary Benson <gbenson@redhat.com>
5410 * solib.c (solib_find_1): Allow fd argument to be NULL.
5411 (exec_file_find): Update comment.
5412 (solib_find): Likewise.
5413 * exec.c (exec_file_locate_attach): Use NULL as fd
5414 argument to exec_file_find to avoid having to close
5416 * infrun.c (follow_exec): Likewise.
5418 2015-04-28 Doug Evans <dje@google.com>
5421 * python/lib/gdb/printing.py (register_pretty_printer): Handle
5422 name or __name__ attributes. Handle gdb module as first argument.
5424 2015-04-28 Doug Evans <dje@google.com>
5427 * python/py-prettyprint.c (print_children): Verify result of children
5428 iterator. Provide better error message.
5429 * python/python-internal..h (gdbpy_print_python_errors_p): Declare.
5430 * python/python.c (gdbpy_print_python_errors_p): New function.
5432 2015-04-28 Doug Evans <dje@google.com>
5434 * gdbtypes.h (struct cplus_struct_type) <n_baseclasses>: Fix comment.
5436 2015-04-28 Sasha Smundak <asmundak@google.com>
5438 * NEWS: Mention gdb.Type.optimized_out method.
5439 * python/py-type.c (typy_optimized_out): New function.
5441 2015-04-28 John Baldwin <jhb@FreeBSD.org>
5443 * fbsd-nat.c: Include "gdb_wait.h" instead of <sys/wait.h>.
5445 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
5447 * utils.c (init_page_info): Set rl_catch_sigwinch to zero.
5448 (initialize_utils): Move call of init_page_info() to ...
5449 * top.c (gdb_init): ... here.
5451 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
5453 * tui/tui-win.c (tui_sigwinch_handler): Remove now-stale comment.
5454 (tui_sigwinch_handler): Still update our idea of
5455 the terminal's width and height even when TUI is not active.
5457 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
5459 * utils.h (set_screen_width_and_height): Declare.
5460 * utils.c (set_screen_width_and_height): Define.
5461 * tui/tui-win.c (tui_update_gdb_sizes): Use it.
5463 2015-04-28 Gary Benson <gbenson@redhat.com>
5465 * infrun.c (solist.h): New include.
5466 (follow_exec): Use exec_file_find to prefix execd_pathname
5469 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
5471 * tui/tui-source.c (tui_set_source_content): Avoid calling
5472 strcpy() when offset is 0.
5474 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
5477 * tui/tui-data.c (tui_free_window): Don't free the locator
5478 window when passed an SRC_WIN or a DISASSEM_WIN.
5480 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
5482 * tui/tui-data.h (struct tui_win_element): Forward-declare.
5483 (tui_win_content): Move declaration.
5484 (struct tui_gen_win_info): Give 'content' field the
5485 type tui_win_content.
5486 * tui/tui-data.c (init_content_element): Remove redundant and
5488 (tui_add_content_elements): Remove erroneous cast.
5489 * tui/tui-disasm.c (tui_set_disassem_content): Remove redundant
5491 (tui_get_begin_asm_address): Likewise.
5492 * tui/tui-regs.c (tui_show_registers): Likewise.
5493 (tui_show_register_group): Likewise.
5494 (tui_display_registers_from): Likewise.
5495 (tui_check_register_values): Likewise.
5496 * tui/tui-source.c (tui_set_source_content): Likewise.
5497 (tui_set_source_content_nil): Likewise.
5498 (tui_source_is_displayed): Likewise.
5499 * tui/tui-stack.c (tui_show_locator_content): Likewise.
5500 (tui_set_locator_fullname): Likewise.
5501 (tui_set_locator_info): Likewise.
5502 (tui_show_frame_info): Likewise.
5503 * tui/tui-winsource.c (tui_clear_source_content): Likewise.
5504 (tui_show_source_line): Likewise.
5505 (tui_horizontal_source_scroll): Likewise.
5506 (tui_update_breakpoint_info): Likewise.
5507 (tui_set_exec_info_content): Likewise.
5508 (tui_show_exec_info_content): Likewise.
5509 (tui_alloc_source_buffer): Likewise.
5510 (tui_line_is_displayed): Likewise.
5511 (tui_addr_is_displayed): Likewise.
5513 2015-04-27 John Baldwin <jhb@FreeBSD.org>
5515 * fbsd-nat.c: (fbsd_wait) [PL_FLAG_EXEC]: Report TARGET_WAITKIND_EXECD
5516 event if PL_FLAG_EXEC is set.
5517 [PL_FLAG_EXEC] (fbsd_insert_exec_catchpoint): New function.
5518 [PL_FLAG_EXEC] (fbsd_remove_exec_catchpoint): New function.
5519 (fbsd_nat_add_target) [PL_FLAG_EXEC]: Set
5520 "to_insert_exec_catchpoint" to "fbsd_insert_exec_catchpoint".
5521 Set "to_remove_exec_catchpoint" to "fbsd_remove_exec_catchpoint".
5523 2015-04-27 John Baldwin <jhb@FreeBSD.org>
5525 * fbsd-nat.c: [PT_LWPINFO] New variable super_wait.
5526 [TDP_RFPPWAIT] New variable fbsd_pending_children.
5527 [TDP_RFPPWAIT] (fbsd_remember_child): New function.
5528 [TDP_RFPPWAIT] (fbsd_is_child_pending): New function.
5529 [TDP_RFPPWAIT] (fbsd_fetch_kinfo_proc): New function.
5530 [PT_LWPINFO] (fbsd_wait): New function.
5531 [TDP_RFPPWAIT] (fbsd_follow_fork): New function.
5532 [TDP_RFPPWAIT] (fbsd_insert_fork_catchpoint): New function.
5533 [TDP_RFPPWAIT] (fbsd_remove_fork_catchpoint): New function.
5534 [TDP_RFPPWAIT] (fbsd_insert_vfork_catchpoint): New function.
5535 [TDP_RFPPWAIT] (fbsd_remove_vfork_catchpoint): New function.
5536 [TDP_RFPPWAIT] (fbsd_enable_follow_fork): New function.
5537 [TDP_RFPPWAIT] (fbsd_post_startup_inferior): New function.
5538 [TDP_RFPPWAIT] (fbsd_post_attach): New function.
5539 (fbsd_nat_add_target) [PT_LWPINFO] Set "to_wait" to
5541 [TDP_RFPPWAIT] Set "to_follow_fork" to "fbsd_follow_fork".
5542 Set "to_insert_fork_catchpoint" to "fbsd_insert_fork_catchpoint".
5543 Set "to_remove_fork_catchpoint" to "fbsd_remove_fork_catchpoint".
5544 Set "to_insert_vfork_catchpoint" to "fbsd_insert_vfork_catchpoint".
5545 Set "to_remove_vfork_catchpoint" to "fbsd_remove_vfork_catchpoint".
5546 Set "to_post_startup_inferior" to "fbsd_post_startup_inferior".
5547 Set "to_post_attach" to "fbsd_post_attach".
5549 2015-04-27 John Baldwin <jhb@FreeBSD.org>
5551 * fbsd-nat.c (fbsd_pid_to_exec_file): Mark static.
5552 (fbsd_find_memory_regions): Mark static.
5553 (fbsd_nat_add_target): New function.
5554 * fbsd-nat.h: Export fbsd_nat_add_target and remove prototypes for
5555 fbsd_pid_to_exec_file and fbsd_find_memory_regions.
5556 * amd64fbsd-nat.c (_initialize_amd64fbsd_nat): Use fbsd_nat_add_target.
5557 * i386fbsd-nat.c (_initialize_i386fbsd_nat): Likewise.
5558 * ppcfbsd-nat.c (_initialize_ppcfbsd_nat): Likewise.
5559 * sparc64fbsd-nat.c (_initialize_sparc64fbsd_nat): Likewise.
5561 2015-04-27 Gary Benson <gbenson@redhat.com>
5563 * objfiles.c (allocate_objfile): Do not attempt to expand name
5564 if name is a "target:" filename.
5565 * auto-load.c (load_auto_scripts_for_objfile): Do not attempt
5566 to load auto-load scripts for objfiles with "target:" filenames.
5568 2015-04-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
5570 * s390-linux-tdep.c: Include "elf/s390.h" and "elf-bfd.h".
5571 (enum s390_vector_abi_kind): New enum.
5572 (struct gdbarch_tdep)<vector_abi>: New field.
5573 (s390_effective_inner_type): Add parameter min_size. Stop
5574 unwrapping if the inner type is smaller than min_size.
5575 (s390_function_arg_float): Adjust call to
5576 s390_effective_inner_type.
5577 (s390_function_arg_vector): New function.
5578 (s390_function_arg_integer): Adjust comment.
5579 (struct s390_arg_state)<vr>: New field.
5580 (s390_handle_arg): Add parameter 'is_unnamed'. Pass vector
5581 arguments according to vector ABI when appropriate.
5582 (s390_push_dummy_call): Initialize the argument state's field
5583 'vr'. Adjust calls to s390_handle_arg.
5584 (s390_register_return_value): Handle vector return values.
5585 (s390_return_value): Apply the "register" return value convention
5586 to a vector when appropriate.
5587 (s390_gdbarch_init): Initialize tdep->vector_abi.
5588 * NEWS: Announce S390 vector ABI support.
5590 2015-04-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
5592 * s390-linux-tdep.c (s390_return_value_convention): Remove
5593 function. Inline its logic...
5594 (s390_return_value): ...here. Instead, move the handling of the
5595 "register" return value convention...
5596 (s390_register_return_value): ...here. New function.
5598 2015-04-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
5601 (is_float_singleton): Remove function. Move the "singleton" part
5603 (s390_effective_inner_type): ...here. New function.
5604 (is_float_like): Remove function. Inline its logic...
5605 (s390_function_arg_float): ...here.
5606 (is_pointer_like, is_integer_like, is_struct_like): Remove
5607 functions. Inline their logic...
5608 (s390_function_arg_integer): ...here.
5609 (s390_function_arg_pass_by_reference): Remove function.
5610 (extend_simple_arg): Remove function.
5611 (alignment_of): Remove function.
5612 (struct s390_arg_state): New structure.
5613 (s390_handle_arg): New function.
5614 (s390_push_dummy_call): Move parameter placement logic to the new
5615 function s390_handle_arg. Call it for calculating the stack area
5616 sizes first, and again for actually writing the parameters.
5618 2015-04-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
5620 * s390-linux-tdep.c (is_power_of_two): Add comment. Return
5621 false if the argument is zero.
5623 2015-04-27 Pierre-Marie de Rodat <derodat@adacore.com>
5625 * ada-lang.c (template_to_static_fixed_type): Return input type
5626 when it is already fixed. Cache the input type itself when not
5627 creating a static fixed copy. Make it explicit that we never
5628 molestate the input type.
5629 * gdbtypes.c (resolve_dynamic_struct): Reset the
5630 TYPE_TARGET_TYPE field for resolved copies.
5632 2015-04-27 Joel Brobecker <brobecker@adacore.com>
5634 * ada-lang.c (ada_is_tagged_type): Add call to ada_check_typedef.
5635 (ada_lookup_struct_elt_type): Remove calls to ada_check_typedef.
5636 (template_to_static_fixed_type): Call ada_check_typedef only
5639 2015-04-24 Andrew Burgess <andrew.burgess@embecosm.com>
5641 * cli/cli-dump.c (srec_dump_command): Add internationalization
5643 (ihex_dump_command): Likewise.
5644 (tekhex_dump_command): Likewise.
5645 (binary_dump_command): Likewise.
5646 (binary_append_command): Likewise.
5648 2015-04-24 Andrew Burgess <andrew.burgess@embecosm.com>
5650 * cli/cli-dump.c (verilog_cmdlist): New variable.
5651 (dump_verilog_memory): New function.
5652 (dump_verilog_value): New function.
5653 (verilog_dump_command): New function.
5654 (_initialize_cli_dump): Add new commands to support verilog dump
5656 * NEWS: Add entry for "dump verilog".
5658 2015-04-24 Pierre-Marie de Rodat <derodat@adacore.com>
5660 * gdbtypes.c (print_gnat_stuff): Do not recurse on the
5661 descriptive type when there is none.
5663 2015-04-23 Patrick Palka <patrick@parcs.ath.cx>
5665 * tui/tui-win.c (tui_async_resize_screen): Call
5666 rl_resize_terminal().
5668 2015-04-22 Jon Turney <jon.turney@dronecode.org.uk>
5670 * windows-nat.c (handle_output_debug_string): Don't change
5671 current_event.dwThreadId.
5672 (get_windows_debug_event): Use thread_id, rather than relying on
5673 current_event.dwThreadId being changed.
5675 2015-04-22 Jon Turney <jon.turney@dronecode.org.uk>
5677 * windows-nat.c (windows_continue): Report an error if
5678 ContinueDebugEvent() fails.
5680 2015-04-16 Jon Turney <jon.turney@dronecode.org.uk>
5682 * windows-nat.c (windows_resume): Fix misspelling in debug output.
5684 2015-04-16 Jon Turney <jon.turney@dronecode.org.uk>
5686 * windows-nat.c (get_windows_debug_event): Replace retval with
5687 thread_id throughout. Update stale comment.
5689 2015-04-16 Jon Turney <jon.turney@dronecode.org.uk>
5691 * windows-nat.c (get_windows_debug_event): Don't use ternary
5692 conditional operator.
5694 2015-04-21 Pierre Muller <muller@sourceware.org>
5697 p-exp.y (yylex): Reorganize code to return the matched pattern
5698 for a field of this.
5700 2015-04-21 Gary Benson <gbenson@redhat.com>
5702 * common/fileio.h (fileio_to_host_openflags): New declaration.
5703 * common/fileio.c (fcntl.h): New include.
5704 (fileio_to_host_openflags): New function, factored out from...
5705 * inf-child.c (inf_child_fileio_open_flags_to_host): ...here.
5708 2015-04-21 Kevin Buettner <kevinb@redhat.com>
5710 * rl78-tdep.c (RL78_SP_ADDR): Define.
5711 (opc_reg_to_gdb_regnum): New static function.
5712 (rl78_analyze_prologue): Recognize instructions forming slightly
5713 more interesting prologues.
5715 2015-04-20 Pierre-Marie de Rodat <derodat@adacore.com>
5718 2015-04-03 Pierre-Marie de Rodat <derodat@adacore.com>
5719 * gdbtypes.c (is_dynamic_type_internal): Remove special handling of
5720 TYPE_CODE_REF types so that they are not considered as dynamic
5721 depending on the referenced type.
5722 (resolve_dynamic_type_internal): Likewise.
5724 2015-04-20 Pierre-Marie de Rodat <derodat@adacore.com>
5727 2015-04-03 Pierre-Marie de Rodat <derodat@adacore.com>
5728 * gdbtypes.c (is_dynamic_type_internal): Remove the unused
5729 "top_level" parameter.
5730 (resolve_dynamic_type_internal): Remove the unused "top_level"
5731 parameter. Update call to is_dynamic_type_internal.
5732 (is_dynamic_type): Update call to is_dynamic_type_internal.
5733 (resolve_dynamic_range): Update call to
5734 resolve_dynamic_type_internal.
5735 (resolve_dynamic_union): Likewise.
5736 (resolve_dynamic_struct): Likewise.
5737 (resolve_dynamic_type): Likewise.
5739 2015-04-19 Gabriel Krisman Bertazi <gabriel@krisman.be>
5741 * breakpoint.c (update_dprintf_command_list): Remove duplicated
5744 2015-04-20 Thomas Schwinge <thomas@codesourcery.com>
5746 * reply_mig_hack.awk: Robustify parsing.
5748 * reply_mig_hack.awk: Don't bother to declare an intermediate
5749 function pointer variable.
5751 2015-04-17 Doug Evans <dje@google.com>
5753 * solib-svr4.c (svr4_exec_displacement): Rename outer "displacement"
5754 to "exec_displacement" to avoid confusion with inner use of the name.
5756 2015-04-17 Pedro Alves <palves@redhat.com>
5758 * arm-linux-nat.c (arm_linux_can_use_hw_breakpoint): Return zero
5759 if HW point of TYPE isn't supported.
5761 2015-04-17 Yao Qi <yao.qi@linaro.org>
5762 Pedro Alves <palves@redhat.com>
5764 * target.h (target_can_use_hardware_watchpoint): Update comments.
5765 Remove trailing ";".
5767 2015-04-17 Gary Benson <gbenson@redhat.com>
5769 * remote.c (remote_add_inferior): New argument try_open_exec.
5770 If nonzero, attempt to open the inferior's executable file as
5771 the main executable if no main executable is open already.
5772 All callers updated.
5773 * NEWS: Mention that GDB now supports automatic location and
5774 retrieval of executable + files from remote targets.
5776 2015-04-17 Gary Benson <gbenson@redhat.com>
5778 * target.h (TARGET_OBJECT_EXEC_FILE): New enum value.
5779 * remote.c (PACKET_qXfer_exec_file): Likewise.
5780 (remote_protocol_features): Register the
5781 "qXfer:exec-file:read" feature.
5782 (remote_xfer_partial): Handle TARGET_OBJECT_EXEC_FILE.
5783 (remote_pid_to_exec_file): New function.
5784 (init_remote_ops): Initialize to_pid_to_exec_file.
5785 (_initialize_remote): Register new "set/show remote
5786 pid-to-exec-file-packet" command.
5787 * NEWS: Announce new qXfer:exec-file:read packet.
5789 2015-04-17 Gary Benson <gbenson@redhat.com>
5791 * nat/linux-procfs.h (linux_proc_pid_to_exec_file):
5793 * nat/linux-procfs.c (linux_proc_pid_to_exec_file):
5794 New function, factored out from...
5795 * linux-nat.c (linux_child_pid_to_exec_file): ...here.
5797 2015-04-17 Gary Benson <gbenson@redhat.com>
5799 * exec.c (solist.h): New include.
5800 (exec_file_locate_attach): Prefix absolute executable
5801 paths with gdb_sysroot if set.
5802 * NEWS: Mention that executable paths may be prepended
5805 2015-04-17 Gary Benson <gbenson@redhat.com>
5807 * solist.h (exec_file_find): New declaration.
5808 * solib.c (solib_find_1): New function, factored out from...
5809 (solib_find): ...here.
5810 (exec_file_find): New function.
5812 2015-04-17 Gary Benson <gbenson@redhat.com>
5814 * gdbcore.h (exec_file_locate_attach): New declaration.
5815 * exec.c (exec_file_locate_attach): New function, factored
5817 * infcmd.c (attach_command_post_wait): ...here.
5819 2015-04-17 Mike Frysinger <vapier@gentoo.org>
5821 * MAINTAINERS: Add myself for Blackfin/write-after-approval.
5823 2015-04-16 Yao Qi <yao.qi@linaro.org>
5825 * infrun.c (maybe_software_singlestep): Declare.
5826 (displaced_step_fixup): Call maybe_software_singlestep.
5828 2015-04-15 Doug Evans <dje@google.com>
5830 * psymtab.c (psym_expand_symtabs_matching): Add QUIT call.
5832 2015-04-15 Doug Evans <dje@google.com>
5834 * dwarf2read.c (dw2_expand_symtabs_matching): Add some QUIT calls.
5836 2015-04-15 Simon Marchi <simon.marchi@ericsson.com>
5838 * python/lib/gdb/command/unwinders.py: Add parentheses.
5840 2015-04-15 Yao Qi <yao.qi@linaro.org>
5842 * arm-linux-tdep.c (arm_linux_copy_svc): Update debug message.
5844 2015-04-15 Yao Qi <yao.qi@linaro.org>
5846 * arm-linux-tdep.c (arm_linux_copy_svc): Fix indentation.
5848 2015-04-15 Yao Qi <yao.qi@linaro.org>
5850 * arm-linux-tdep.c (arm_linux_cleanup_svc): Use
5851 dsc->insn_size instead of 4.
5853 2015-04-14 Gary Benson <gbenson@redhat.com>
5855 * jit.c (mem_bfd_iovec_stat): Zero supplied buffer.
5856 * minidebug.c (lzma_stat): Likewise.
5857 * solib-spu.c (spu_bfd_iovec_stat): Likewise.
5858 * spu-linux-nat.c (spu_bfd_iovec_stat): Likewise.
5860 2015-04-13 Stan Shebs <stanshebs@google.com>
5862 * MAINTAINERS: Update my email address.
5864 2015-04-13 John Baldwin <jhb@FreeBSD.org>
5866 * amd64-tdep.c (amd64_target_description): New function.
5867 * amd64-tdep.h: Export amd64_target_description and tdesc_amd64.
5868 * amd64bsd-nat.c [PT_GETXSTATE_INFO]: New variable amd64bsd_xsave_len.
5869 (amd64bsd_fetch_inferior_registers) [PT_GETXSTATE_INFO]: Handle
5870 x86 extended save area.
5871 (amd64bsd_store_inferior_registers) [PT_GETXSTATE_INFO]: Likewise.
5872 * amd64bsd-nat.h: Export amd64bsd_xsave_len.
5873 * amd64fbsd-nat.c (amd64fbsd_read_description): New function.
5874 (_initialize_amd64fbsd_nat): Set "to_read_description" to
5875 "amd64fbsd_read_description".
5876 * amd64fbsd-tdep.c (amd64fbsd_core_read_description): New function.
5877 (amd64fbsd_supply_xstateregset): New function.
5878 (amd64fbsd_collect_xstateregset): New function.
5879 Add "amd64fbsd_xstateregset".
5880 (amd64fbsd_iterate_over_regset_sections): New function.
5881 (amd64fbsd_init_abi): Set "xsave_xcr0_offset" to
5882 "I386_FBSD_XSAVE_XCR0_OFFSET".
5883 Add "iterate_over_regset_sections" gdbarch method.
5884 Add "core_read_description" gdbarch method.
5885 * i386-tdep.c (i386_target_description): New function.
5886 * i386-tdep.h: Export i386_target_description and tdesc_i386.
5887 * i386bsd-nat.c [PT_GETXSTATE_INFO]: New variable i386bsd_xsave_len.
5888 (i386bsd_fetch_inferior_registers) [PT_GETXSTATE_INFO]: Handle
5889 x86 extended save area.
5890 (i386bsd_store_inferior_registers) [PT_GETXSTATE_INFO]: Likewise.
5891 * i386bsd-nat.h: Export i386bsd_xsave_len.
5892 * i386fbsd-nat.c (i386fbsd_read_description): New function.
5893 (_initialize_i386fbsd_nat): Set "to_read_description" to
5894 "i386fbsd_read_description".
5895 * i386fbsd-tdep.c (i386fbsd_core_read_xcr0): New function.
5896 (i386fbsd_core_read_description): New function.
5897 (i386fbsd_supply_xstateregset): New function.
5898 (i386fbsd_collect_xstateregset): New function.
5899 Add "i386fbsd_xstateregset".
5900 (i386fbsd_iterate_over_regset_sections): New function.
5901 (i386fbsd4_init_abi): Set "xsave_xcr0_offset" to
5902 "I386_FBSD_XSAVE_XCR0_OFFSET".
5903 Add "iterate_over_regset_sections" gdbarch method.
5904 Add "core_read_description" gdbarch method.
5905 * i386fbsd-tdep.h: New file.
5907 2015-04-11 Jan Kratochvil <jan.kratochvil@redhat.com>
5909 * NEWS (Changes since GDB 7.9): Add removed -xdb.
5910 * breakpoint.c (command_line_is_silent): Remove xdb_commands
5912 (_initialize_breakpoint): Remove xdb_commands for bc, ab, sb, db, ba
5914 * cli/cli-cmds.c (_initialize_cli_cmds): Remove xdb_commands for v and
5916 * cli/cli-decode.c (find_command_name_length): Remove xdb_commands
5918 * defs.h (xdb_commands): Remove declaration.
5919 * f-valprint.c (_initialize_f_valprint): Remove xdb_commands for lc.
5920 * guile/scm-cmd.c (command_classes): Remove xdb from comment.
5921 * infcmd.c (run_no_args_command, go_command): Remove.
5922 (_initialize_infcmd): Remove xdb_commands for S, go, g, R and lr.
5923 * infrun.c (xdb_handle_command): Remove.
5924 (_initialize_infrun): Remove xdb_commands for lz and z.
5925 * main.c (xdb_commands): Remove variable.
5926 (captured_main): Remove "xdb" from long_options.
5927 (print_gdb_help): Remove --xdb from help.
5928 * python/py-cmd.c (gdbpy_initialize_commands): Remove xdb from comment.
5929 * source.c (_initialize_source): Remove xdb_commands for D, ld, / and ?.
5930 * stack.c (backtrace_full_command, args_plus_locals_info)
5931 (current_frame_command): Remove.
5932 (_initialize_stack): Remove xdb_commands for t, T and l.
5933 * symtab.c (_initialize_symtab): Remove xdb_commands for lf and lg.
5934 * thread.c (_initialize_thread): Remove xdb_commands condition.
5935 * tui/tui-layout.c (tui_toggle_layout_command)
5936 (tui_toggle_split_layout_command, tui_handle_xdb_layout): Remove.
5937 (_initialize_tui_layout): Remove xdb_commands for td and ts.
5938 * tui/tui-regs.c (tui_scroll_regs_forward_command)
5939 (tui_scroll_regs_backward_command): Remove.
5940 (_initialize_tui_regs): Remove xdb_commands for fr, gr, sr, +r and -r.
5941 * tui/tui-win.c (tui_xdb_set_win_height_command): Remove.
5942 (_initialize_tui_win): Remove xdb_commands for U and w.
5943 * utils.c (pagination_on_command, pagination_off_command): Remove.
5944 (initialize_utils): Remove xdb_commands for am and sm.
5946 2015-04-10 Pedro Alves <palves@redhat.com>
5948 * infrun.c (displaced_step_fixup): Switch to the event ptid
5949 earlier. If the thread stopped for a watchpoint and the
5950 target/arch has non-continuable watchpoints, cancel the displaced
5952 (resume): Don't start a displaced step if in-line step-over info
5955 2015-04-10 Pedro Alves <palves@redhat.com>
5957 * infrun.c (displaced_step_in_progress): New function.
5958 (do_target_resume): Advise target to report all signals if
5961 2015-04-10 Pedro Alves <palves@redhat.com>
5964 * infrun.c (process_event_stop_test): Don't assume a step-resume
5965 is set if tp->stepped_breakpoint is true.
5967 2015-04-10 Yao Qi <yao.qi@linaro.org>
5969 * arm-tdep.c (install_alu_reg): Update comment.
5970 (thumb_copy_alu_reg): Remove local variable rn. Update
5971 debugging message. Use r2 instead of r1 in the modified
5974 2015-04-10 Pedro Alves <palves@redhat.com>
5977 * amd64-linux-tdep.c (amd64_linux_init_abi_common): Install
5978 linux_displaced_step_location as gdbarch_displaced_step_location
5980 * arm-linux-tdep.c (arm_linux_init_abi): Likewise.
5981 * i386-linux-tdep.c (i386_linux_init_abi): Likewise.
5982 * linux-tdep.c (linux_displaced_step_location): New function,
5983 based on ppc_linux_displaced_step_location.
5984 * linux-tdep.h (linux_displaced_step_location): New declaration.
5985 * ppc-linux-tdep.c (ppc_linux_entry_point_addr): Delete.
5986 (ppc_linux_inferior_created, ppc_linux_displaced_step_location):
5988 (ppc_linux_init_abi): Install linux_displaced_step_location as
5989 gdbarch_displaced_step_location hook, even without Cell/B.E..
5990 (_initialize_ppc_linux_tdep): Don't install
5991 ppc_linux_inferior_created as inferior_created observer.
5992 * s390-linux-tdep.c (s390_gdbarch_init): Install
5993 linux_displaced_step_location as gdbarch_displaced_step_location
5996 2015-04-09 Gary Benson <gbenson@redhat.com>
5998 * common/common-remote-fileio.h: Rename to...
5999 * common/fileio.h: ...this. Update all references.
6000 (remote_fileio_to_fio_error): Rename to...
6001 (host_to_fileio_error): ...this.
6002 (remote_fileio_to_be): Rename to...
6003 (host_to_bigendian): ...this. Update all callers.
6004 (remote_fileio_to_fio_uint): Rename to...
6005 (host_to_fileio_uint): ...this. Update all callers.
6006 (remote_fileio_to_fio_time): Rename to...
6007 (host_to_fileio_time): ...this. Update all callers.
6008 (remote_fileio_to_fio_stat): Rename to...
6009 (host_to_fileio_stat): ...this.
6010 Update all references.
6011 * common/common-remote-fileio.c: Rename to...
6012 * common/fileio.c: ...this. Update all references.
6013 (remote_fileio_to_fio_error): Rename to...
6014 (host_to_fileio_error): ...this. Update all callers.
6015 (remote_fileio_mode_to_target): Rename to...
6016 (fileio_mode_pack): ...this. Update all callers.
6017 (remote_fileio_to_fio_mode): Rename to...
6018 (host_to_fileio_mode): ...this. Update all callers.
6019 (remote_fileio_to_fio_ulong): Rename to...
6020 (host_to_fileio_ulong): ...this. Update all callers.
6021 (remote_fileio_to_fio_stat): Rename to...
6022 (host_to_fileio_stat): ...this. Update all callers.
6024 2015-04-09 Andy Wingo <wingo@igalia.com>
6026 * guile/scm-frame.c (gdbscm_frame_read_register): New function.
6027 (frame_functions): Bind gdbscm_frame_read_register to
6028 frame-read-register.
6029 * guile/lib/gdb.scm (frame-read-register): Export.
6031 2015-04-09 Gary Benson <gbenson@redhat.com>
6033 * common/common-remote-fileio.h (remote_fileio_to_fio_error):
6035 * common/common-remote-fileio.c (remote_fileio_to_fio_error):
6036 New function, factored out the named functions below.
6037 * inf-child.c (gdb/fileio.h): Remove include.
6038 (common-remote-fileio.h): New include.
6039 (inf_child_errno_to_fileio_error): Remove function. Update
6040 all callers to use remote_fileio_to_fio_error.
6041 * remote-fileio.c (remote_fileio_errno_to_target): Likewise.
6043 2015-04-09 Andy Wingo <wingo@igalia.com>
6045 * MAINTAINERS (Write After Approval): Add Andy Wingo.
6047 2015-04-09 H.J. Lu <hongjiu.lu@intel.com>
6049 * acinclude.m4: (GDB_AC_CHECK_BFD): Set ZLIBDIR with $zlibdir.
6050 Replace $zlibdir with $ZLIBDIR in LDFLAGS.
6051 * configure: Regenerated.
6053 2015-04-09 Pedro Alves <palves@redhat.com>
6055 * gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add strtok_r.
6056 * gnulib/Makefile.in (aclocal_m4_deps): Add import/m4/strtok_r.m4.
6057 * gnulib/configure, gnulib/config.in, gnulib/aclocal.m4: Regenerate.
6058 * gnulib/import/Makefile.am: Update.
6059 * gnulib/import/Makefile.in: Update.
6060 * gnulib/import/m4/gnulib-cache.m4: Update.
6061 * gnulib/import/m4/gnulib-comp.m4: Update.
6062 * gnulib/import/m4/strtok_r.m4: New file.
6063 * gnulib/import/strtok_r.c: New file.
6065 2015-04-09 Pedro Alves <palves@redhat.com>
6067 * gnulib/update-gnulib.sh (aclocal version check): Filter out
6068 "called too early to check prototype".
6070 2015-04-08 Sergio Durigan Junior <sergiodj@redhat.com>
6073 * python/py-cmd.c (cmdpy_completer_helper): Adjust function to not
6074 use a caching mechanism. Adjust comments and code to reflect
6075 that. Replace 'sizeof' by 'strlen' when fetching 'wordobj'.
6076 (cmdpy_completer_handle_brkchars): Adjust call to
6077 cmdpy_completer_helper. Call Py_XDECREF for 'resultobj'.
6078 (cmdpy_completer): Likewise.
6080 2015-04-08 Yao Qi <yao.qi@linaro.org>
6082 * spu-tdep.c (spu_gdbarch_init): Don't call
6083 set_gdbarch_cannot_step_breakpoint.
6085 2015-04-07 Sergio Durigan Junior <sergiodj@redhat.com>
6087 * linux-tdep.c (decode_vmflags): Initialize 'saveptr'.
6089 2015-04-07 Pedro Alves <palves@redhat.com>
6091 * gdbthread.h (ALL_NON_EXITED_THREADS_SAFE): Rename to ...
6092 (ALL_THREADS_SAFE): ... this, and don't skip exited threads.
6093 (delete_exited_threads): New declaration.
6094 * infrun.c (follow_exec): Use ALL_THREADS_SAFE.
6095 * linux-nat.c (linux_nat_update_thread_list): New function.
6096 (linux_nat_add_target): Install it.
6097 * remote.c (remote_update_thread_list): Use ALL_THREADS_SAFE.
6098 * thread.c (prune_threads): Use ALL_THREADS_SAFE.
6099 (delete_exited_threads): New function.
6101 2015-04-07 Pedro Alves <pedro@codesourcery.com>
6103 * infrun.c (resume) <displaced stepping debug output>: Get the
6104 leader thread's regcache, not resume_ptid's.
6106 2015-04-06 Doug Evans <xdje42@gmail.com>
6108 * symtab.c (hash_symbol_entry): Hash STRUCT_DOMAIN symbols as
6110 (symbol_cache_lookup): Clarify use of bsc_ptr, slot_ptr parameters.
6111 Include symbol domain in debugging output.
6113 2015-04-06 Pedro Alves <palves@redhat.com>
6114 Bernd Edlinger <bernd.edlinger@hotmail.de>
6116 * configure.ac: Remove the mingw32-specific stub-termcap.o
6117 fallback, and instead fallback to the stub termcap on all hosts.
6118 * configure: Regenerate.
6119 * stub-termcap.c [!__MINGW32__] (PC, BC, UP): Define as weak
6122 2015-04-03 Pierre-Marie de Rodat <derodat@adacore.com>
6124 * gdbtypes.c (is_dynamic_type_internal): Remove the unused
6125 "top_level" parameter.
6126 (resolve_dynamic_type_internal): Remove the unused "top_level"
6127 parameter. Update call to is_dynamic_type_internal.
6128 (is_dynamic_type): Update call to is_dynamic_type_internal.
6129 (resolve_dynamic_range): Update call to
6130 resolve_dynamic_type_internal.
6131 (resolve_dynamic_union): Likewise.
6132 (resolve_dynamic_struct): Likewise.
6133 (resolve_dynamic_type): Likewise.
6135 2015-04-03 Pierre-Marie de Rodat <derodat@adacore.com>
6137 * gdbtypes.c (is_dynamic_type_internal): Remove special handling of
6138 TYPE_CODE_REF types so that they are not considered as dynamic
6139 depending on the referenced type.
6140 (resolve_dynamic_type_internal): Likewise.
6142 2015-04-02 H.J. Lu <hongjiu.lu@intel.com>
6144 * Makefile.in (top_srcdir): New.
6145 * configure: Regenerated.
6147 2015-04-02 Gary Benson <gbenson@redhat.com>
6149 * NEWS: Announce the new default sysroot of "target:".
6151 2015-04-02 Gary Benson <gbenson@redhat.com>
6153 * main.c (captured_main): Set gdb_sysroot to "target:"
6154 if not otherwise set.
6156 2015-04-02 Gary Benson <gbenson@redhat.com>
6158 * exec.c (exec_file_attach): Support "target:" filenames.
6160 2015-04-02 Gary Benson <gbenson@redhat.com>
6162 * solib.c (solib_find): Strip "target:" prefix from sysroot
6163 if accessing local files.
6165 2015-04-02 Gary Benson <gbenson@redhat.com>
6167 * symfile.c (symfile_bfd_open): Reorder to remove duplicated
6168 checks and error messages.
6170 2015-04-02 Gary Benson <gbenson@redhat.com>
6172 * remote.h (REMOTE_SYSROOT_PREFIX): Remove definition.
6173 (remote_filename_p): Remove declaration.
6174 (remote_bfd_open): Likewise.
6175 * remote.c (remote_bfd_iovec_open): Remove function.
6176 (remote_bfd_iovec_close): Likewise.
6177 (remote_bfd_iovec_pread): Likewise.
6178 (remote_bfd_iovec_stat): Likewise.
6179 (remote_filename_p): Likewise.
6180 (remote_bfd_open): Likewise.
6181 * symfile.h (gdb_bfd_open_maybe_remote): Remove declaration.
6182 * symfile.c (separate_debug_file_exists): Use gdb_bfd_open.
6183 (gdb_bfd_open_maybe_remote): Remove function.
6184 (symfile_bfd_open): Replace remote filename check with
6185 target filename check.
6186 (reread_symbols): Use gdb_bfd_open.
6187 * build-id.c (gdbcore.h): New include.
6188 (build_id_to_debug_bfd): Use gdb_bfd_open.
6189 * infcmd.c (attach_command_post_wait): Remove remote filename
6191 * solib.c (solib_find): Replace remote-specific handling with
6192 target-specific handling. Update comments where necessary.
6193 (solib_bfd_open): Replace remote-specific handling with
6194 target-specific handling.
6195 (gdb_sysroot_changed): New function.
6196 (_initialize_solib): Call the above when gdb_sysroot changes.
6197 * windows-tdep.c (gdbcore.h): New include.
6198 (windows_xfer_shared_library): Use gdb_bfd_open.
6200 2015-04-02 Gary Benson <gbenson@redhat.com>
6202 * gdb/gdb_bfd.h (TARGET_SYSROOT_PREFIX): New definition.
6203 (is_target_filename): New declaration.
6204 (gdb_bfd_has_target_filename): Likewise.
6205 (gdb_bfd_open): Update documentation comment.
6206 * gdb_bfd.c (target.h): New include.
6207 (gdb/fileio.h): Likewise.
6208 (is_target_filename): New function.
6209 (gdb_bfd_has_target_filename): Likewise.
6210 (fileio_errno_to_host): Likewise.
6211 (gdb_bfd_iovec_fileio_open): Likewise.
6212 (gdb_bfd_iovec_fileio_pread): Likewise.
6213 (gdb_bfd_iovec_fileio_close): Likewise.
6214 (gdb_bfd_iovec_fileio_fstat): Likewise.
6215 (gdb_bfd_open): Use target fileio to access paths prefixed
6216 with "target:" where necessary.
6218 2015-04-02 Gary Benson <gbenson@redhat.com>
6220 * target.h (struct target_ops) <to_filesystem_is_local>:
6222 (target_filesystem_is_local): New macro.
6223 * target-delegates.c: Regenerate.
6224 * remote.c (remote_filesystem_is_local): New function.
6225 (init_remote_ops): Initialize to_filesystem_is_local.
6227 2015-04-02 Gary Benson <gbenson@redhat.com>
6229 * target.h (struct target_ops) <to_fileio_fstat>: New field.
6230 (target_fileio_fstat): New declaration.
6231 * target.c (target_fileio_fstat): New function.
6232 * inf-child.c (inf_child_fileio_fstat): Likewise.
6233 (inf_child_target): Initialize to_fileio_fstat.
6234 * remote.c (init_remote_ops): Likewise.
6236 2015-04-01 Sasha Smundak <asmundak@google.com>
6238 * Makefile.in (SUBDIR_PYTHON_OBJS): Add py-unwind.o.
6239 (SUBDIR_PYTHON_SRCS): Add py-unwind.c.
6240 (py-unwind.o): New recipe.
6241 * NEWS: mention Python frame unwinding.
6242 * data-directory/Makefile.in (PYTHON_FILE_LIST): Add
6243 gdb/unwinder.py and gdb/command/unwinder.py
6244 * python/lib/gdb/__init__.py (packages): Add frame_unwinders
6246 (execute_unwinders): New function.
6247 * python/lib/gdb/command/unwinders.py: New file.
6248 * python/lib/gdb/unwinder.py: New file.
6249 * python/py-objfile.c (objfile_object): Add frame_unwinders field.
6250 (objfpy_dealloc): Decrement frame_unwinders reference count.
6251 (objfpy_initialize): Create frame_unwinders list.
6252 (objfpy_get_frame_unwinders): New function.
6253 (objfpy_set_frame_unwinders): Ditto.
6254 (objfile_getset): Add frame_unwinders attribute to Objfile.
6255 * python/py-progspace.c (pspace_object): Add frame_unwinders field.
6256 (pspy_dealloc): Decrement frame_unwinders reference count.
6257 (pspy_initialize): Create frame_unwinders list.
6258 (pspy_get_frame_unwinders): New function.
6259 (pspy_set_frame_unwinders): Ditto.
6260 (pspy_getset): Add frame_unwinders attribute to gdb.Progspace.
6261 * python/py-unwind.c: New file.
6262 * python/python-internal.h (pspy_get_name_unwinders): New prototype.
6263 (objpy_get_frame_unwinders): New prototype.
6264 (gdbpy_initialize_unwind): New prototype.
6265 * python/python.c (gdbpy_apply_type_printers): Call
6266 gdbpy_initialize_unwind.
6268 2015-04-01 Pedro Alves <palves@redhat.com>
6270 * infrun.c (resume): Check currently_stepping after clearing
6271 stepped_breakpoint, not before.
6273 2015-04-01 Pedro Alves <palves@redhat.com>
6275 * infrun.c (print_target_wait_results): Print all the ptid
6278 2015-04-01 Pedro Alves <palves@redhat.com>
6280 * infrun.c (keep_going): Also discard cleanups if inserting
6283 2015-04-01 Pedro Alves <palves@redhat.com>
6285 * infrun.c (wait_for_inferior): Install the
6286 finish_thread_state_cleanup cleanup across the whole function, not
6287 just around handle_inferior_event.
6289 2015-04-01 Pedro Alves <palves@redhat.com>
6291 * infrun.c (resume) <step past permanent breakpoint>: Use
6294 2015-04-01 Pedro Alves <palves@redhat.com>
6296 * linux-nat.c (linux_handle_extended_wait): Always call set_running.
6298 2015-04-01 Pierre-Marie de Rodat <derodat@adacore.com>
6300 * MAINTAINERS (Write After Approval): Add "Pierre-Marie de Rodat".
6302 2015-04-01 Pedro Alves <palves@redhat.com>
6304 * linux-thread-db.c (record_thread): Readd the thread to gdb's
6305 list if it was marked exited.
6307 2015-04-01 H.J. Lu <hongjiu.lu@intel.com>
6309 * configure: Regenerated.
6311 2015-03-31 Sergio Durigan Junior <sergiodj@redhat.com>
6312 Jan Kratochvil <jan.kratochvil@redhat.com>
6313 Oleg Nesterov <oleg@redhat.com>
6316 * linux-tdep.c: Include 'gdbcmd.h' and 'gdb_regex.h'.
6317 New enum identifying the various options of the coredump_filter
6319 (struct smaps_vmflags): New struct.
6320 (use_coredump_filter): New variable.
6321 (decode_vmflags): New function.
6322 (mapping_is_anonymous_p): Likewise.
6323 (dump_mapping_p): Likewise.
6324 (linux_find_memory_regions_full): New variables
6325 'coredumpfilter_name', 'coredumpfilterdata', 'pid', 'filterflags'.
6326 Removed variable 'modified'. Read /proc/<PID>/smaps file; improve
6327 parsing of its information. Implement memory mapping filtering
6328 based on its contents.
6329 (show_use_coredump_filter): New function.
6330 (_initialize_linux_tdep): New command 'set use-coredump-filter'.
6331 * NEWS: Mention the possibility of using the
6332 '/proc/PID/coredump_filter' file when generating a corefile.
6333 Mention new command 'set use-coredump-filter'.
6335 2015-03-31 Sergio Durigan Junior <sergiodj@redhat.com>
6337 * solib-svr4.c (solib_svr4_r_ldsomap): Catch possible exception by
6338 read_memory_unsigned_integer.
6340 2015-03-31 H.J. Lu <hongjiu.lu@intel.com>
6342 * Makefile.in (ZLIB): New.
6343 (ZLIBINC): Likewise.
6344 (INTERNAL_CFLAGS_BASE): Add $(ZLIBINC).
6345 (CLIBS): Add $(ZLIB).
6346 * acinclude.m4: (GDB_AC_CHECK_BFD): Add $zlibdir to LDFLAGS.
6348 * gdb_bfd.c: Don't check HAVE_ZLIB_H to include <zlib.h>.
6349 * top.c (print_gdb_configuration): Remove --with-zlib and
6351 * config.in: Regenerated.
6352 * configure: Likewise.
6354 2015-03-31 Antoine Tremblay <antoine.tremblay@ericsson.com>
6356 * NEWS: Mention info os cpus support.
6357 * gdb/nat/linux-osdata.c (linux_xfer_osdata_cpus): New function.
6358 (struct osdata_type): Add cpus entry, reorder the entries in
6361 2015-03-31 Matthias Klose <doko@ubuntu.com>
6363 * compile/compile.c (compile_to_object): Allow triplets with or
6366 2015-03-30 Doug Evans <dje@google.com>
6369 * cp-namespace.c (cp_search_static_and_baseclasses): Always look for
6370 klass in VAR_DOMAIN.
6372 2015-03-30 Gary Benson <gbenson@redhat.com>
6374 * remote.c (remote_mourn_1): Remove function. Update all callers
6375 to use remote_mourn.
6376 (extended_remote_mourn_1): Remove function. Update all callers
6377 to use extended_remote_mourn.
6378 (extended_remote_attach_1): Remove function. Update all callers
6379 to use extended_remote_attach.
6381 2015-03-28 James Bowman <james.bowman@ftdichip.com>
6383 * Makefile.in (ALL_TARGET_OBS): Add ft32-tdep.o.
6384 (HFILES_NO_SRCDIR): Add ft32-tdep.h.
6385 (ALLDEPFILES): Add ft32-tdep.c.
6386 * configure.tgt: Add FT32 entry.
6387 * ft32-tdep.c: New file, FT32 target-dependent code.
6388 * ft32-tdep.h: New file, FT32 target-dependent code.
6390 2015-03-27 Jan Kratochvil <jan.kratochvil@redhat.com>
6393 2015-03-26 Jan Kratochvil <jan.kratochvil@redhat.com>
6395 * printcmd.c (print_command_1): Move expr variable scope.
6397 2015-03-27 Joel Brobecker <brobecker@adacore.com>
6399 * dtrace-probe.c (dtrace_process_dof_probe): Initialize expr to NULL.
6401 2015-03-27 Andrzej Kaczmarek <andrzej.kaczmarek@tieto.com>
6403 * gdb_bfd.c (gdb_bfd_section_index): Fix off-by-one for special
6406 2015-03-26 Joel Brobecker <brobecker@adacore.com>
6408 * dtrace-probe.c (dtrace_process_dof_probe): Contain any
6409 exception raised while parsing the probe arguments.
6410 Force parsing to be done using the C language parser.
6411 * expression.h (parse_expression_with_language): Declare.
6412 * parse.c (parse_expression_with_language): New function.
6414 2015-03-26 Jon Turney <jon.turney@dronecode.org.uk>
6416 * MAINTAINERS (Write After Approval): Add "Jon Turney".
6418 2015-03-26 Andy Wingo <wingo@igalia.com>
6421 * dwarf2read.c (struct partial_die_info): Add has_const_value
6423 (add_partial_symbol): Don't punt on symbols that have const_value
6425 (read_partial_die): Detect DW_AT_const_value.
6427 2015-03-26 Jan Kratochvil <jan.kratochvil@redhat.com>
6430 * printcmd.c (print_command_1): Move expr variable scope.
6432 2015-03-26 Jan Kratochvil <jan.kratochvil@redhat.com>
6435 * printcmd.c (validate_format): Make the parameter cmdname const.
6437 2015-03-26 Don Breazeal <donb@codesourcery.com>
6439 * remote.c (_initialize_remote): Update comment.
6441 2015-03-26 Pedro Alves <palves@redhat.com>
6442 Jon TURNEY <jon.turney@dronecode.org.uk>
6444 * coffread.c (coff_symfile_read): When constructing the name of an
6445 import stub symbol from import symbol for amd64, only skip the
6446 char after _imp_ if the target is underscored (like i386) and the
6447 char is indeed the target's leading char.
6449 2015-03-25 Pedro Alves <palves@redhat.com>
6451 * target.h <to_async>: Replace 'callback' and 'context' parameters
6452 with boolean 'enable' parameter.
6453 (target_async): Replace CALLBACK and CONTEXT parameters with
6454 boolean ENABLE parameter.
6455 * inf-loop.c (inferior_event_handler): Adjust.
6456 * linux-nat.c (linux_nat_attach, linux_nat_resume)
6457 (linux_nat_resume): Adjust.
6458 (async_client_callback, async_client_context): Delete.
6459 (handle_target_event): Call inferior_event_handler directly.
6460 (linux_nat_async): Replace 'callback' and 'context' parameters
6461 with boolean 'enable' parameter. Adjust. Remove references to
6462 async_client_callback and async_client_context.
6463 (linux_nat_close): Adjust.
6464 * record-btrace.c (record_btrace_async): Replace 'callback' and
6465 'context' parameters with boolean 'enable' parameter. Adjust.
6466 (record_btrace_resume): Adjust.
6467 * record-full.c (record_full_async): Replace 'callback' and
6468 'context' parameters with boolean 'enable' parameter. Adjust.
6469 (record_full_resume, record_full_core_resume): Adjust.
6470 * remote.c (struct remote_state) <async_client_callback,
6471 async_client_context>: Delete fields.
6472 (remote_start_remote, extended_remote_attach_1, remote_resume)
6473 (extended_remote_create_inferior): Adjust.
6474 (remote_async_serial_handler): Call inferior_event_handler
6476 (remote_async): Replace 'callback' and 'context' parameters with
6477 boolean 'enable' parameter. Adjust.
6478 * top.c (gdb_readline_wrapper_cleanup, gdb_readline_wrapper):
6480 * target-delegates.c: Regenerate.
6482 2015-03-25 Gary Benson <gbenson@redhat.com>
6483 Pedro Alves <palves@redhat.com>
6485 * target.c (fileio_ft_t): New typedef, define object vector.
6486 (fileio_fhandles): New static variable.
6487 (is_closed_fileio_fh): New macro.
6488 (lowest_closed_fd): New static variable.
6489 (acquire_fileio_fd): New function.
6490 (release_fileio_fd): Likewise.
6491 (fileio_fd_to_fh): New macro.
6492 (target_fileio_open): Wrap the file descriptor on success.
6493 (target_fileio_pwrite): Updated to use wrapped file descriptor.
6494 (target_fileio_pread): Likewise.
6495 (target_fileio_close): Likewise.
6497 2015-03-24 Pedro Alves <palves@redhat.com>
6499 * thread.c (thread_apply_all_command): Take exited threads into
6502 2015-03-24 Pedro Alves <palves@redhat.com>
6504 * infrun.c (resume, proceed): Mention
6505 switch_back_to_stepped_thread, not switch_back_to_stepping.
6507 2015-03-24 Pedro Alves <palves@redhat.com>
6509 * infrun.c (user_visible_resume_ptid): Rewrite going from
6510 most-locked to unlocked instead of the opposite. Move comment ...
6511 * infrun.h (user_visible_resume_ptid): ... here.
6513 2015-03-24 Pedro Alves <palves@redhat.com>
6515 * linux-nat.c (linux_nat_resume): Output debug logs before trying
6516 to resume the event lwp. Use the lwp's ptid instead of the passed
6517 in (maybe wildcard) ptid.
6518 (stop_wait_callback): Tweak debug log output.
6519 (check_stopped_by_breakpoint): Tweak debug log output. Also dump
6521 (linux_nat_filter_event): In debug output, distinguish a
6522 resume_stop SIGSTOP from a delayed SIGSTOP. Output debug logs
6523 before trying to resume the lwp.
6525 2015-03-24 Joel Brobecker <brobecker@adacore.com>
6527 * gdbtypes.h (struct dynamic_prop_list) <prop>: Remove
6528 pointer indirection.
6529 * gdbtypes.c (get_dyn_prop): Adjust, following change above.
6530 (add_dyn_prop, copy_dynamic_prop_list): Likewise.
6532 2015-03-24 Joel Brobecker <brobecker@adacore.com>
6534 * gdbtypes.h (enum dynamic_prop_node_kind) <DYN_PROP_DATA_LOCATION>:
6535 Renames DYN_ATTR_DATA_LOCATION.
6536 (TYPE_DATA_LOCATION): Use DYN_PROP_DATA_LOCATION instead of
6537 DYN_ATTR_DATA_LOCATION.
6538 * dwarf2read.c (set_die_type): Use DYN_PROP_DATA_LOCATION
6539 instead of DYN_ATTR_DATA_LOCATION.
6541 2015-03-24 Pedro Alves <palves@redhat.com>
6543 * breakpoint.c (until_break_command): Adjust call to proceed.
6544 * gdbthread.h (struct thread_control_state) <stepping_command>:
6546 * infcall.c (run_inferior_call): Adjust call to proceed.
6547 * infcmd.c (run_command_1, proceed_thread_callback, continue_1):
6548 Adjust calls to proceed.
6549 (set_step_frame): Set the current thread's step_start_function
6551 (step_once): Adjust calls to proceed.
6552 (jump_command, signal_command, until_next_command)
6553 (finish_backward, finish_forward, proceed_after_attach_callback)
6554 (attach_command_post_wait): Adjust calls to proceed.
6555 * infrun.c (proceed_after_vfork_done): Adjust call to proceed.
6556 (do_target_resume): New function, factored out from ...
6557 (resume): ... here. Remove 'step' parameter. Instead, check
6558 currently_stepping to determine whether the thread should be
6560 (proceed): Remove 'step' parameter and don't set the thread's
6561 step_start_function here. Adjust call to 'resume'.
6562 (handle_inferior_event): Adjust calls to 'resume'.
6563 (switch_back_to_stepped_thread): Use do_target_resume instead of
6565 (keep_going): Adjust calls to 'resume'.
6566 * infrun.h (proceed): Remove 'step' parameter.
6568 * windows-nat.c (do_initial_windows_stuff): Adjust call to
6570 * mi/mi-main.c (proceed_thread): Adjust call to 'proceed'.
6572 2015-03-24 Pedro Alves <palves@redhat.com>
6574 * gdbthread.h (struct thread_control_state) <stepping_command>:
6576 * infcmd.c (step_once): Pass step=1 to clear_proceed_status. Set
6577 the thread's stepping_command field.
6578 * infrun.c (resume): Check the thread's stepping_command flag to
6579 determine which threads should be resumed. Rename 'entry_step'
6581 (clear_proceed_status_thread): Clear 'stepping_command'.
6582 (schedlock_applies): Change parameter type to struct thread_info
6584 (find_thread_needs_step_over): Remove 'step' parameter. Adjust.
6585 (switch_back_to_stepped_thread): Adjust calls to
6586 'schedlock_applies'.
6587 (_initialize_infrun): Adjust "set scheduler-locking step" help.
6589 2015-03-24 Pedro Alves <palves@redhat.com>
6591 * infrun.c (step_start_function): Delete and ...
6592 * gdbthread.h (struct thread_control_state) <step_start_function>:
6593 ... now a field here.
6594 * infrun.c (clear_proceed_status_thread): Clear the thread's
6595 step_start_function.
6596 (proceed, process_event_stop_test, print_stop_event): Adjust.
6598 2015-03-24 Pedro Alves <palves@redhat.com>
6600 * infrun.c (proceed): No longer handle negative step.
6602 2015-03-24 Gary Benson <gbenson@redhat.com>
6604 * nat/x86-linux.h (x86_linux_new_thread): New declaration.
6605 (x86_linux_prepare_to_resume): Likewise.
6606 * x86-linux-nat.c (x86_linux_new_thread):
6607 Moved to nat/x86-linux.c.
6608 (x86_linux_prepare_to_resume): Likewise.
6609 * nat/x86-linux.c (x86_linux_new_thread): New function.
6610 (x86_linux_prepare_to_resume): Likewise.
6612 2015-03-24 Gary Benson <gbenson@redhat.com>
6614 * nat/x86-linux-dregs.h: New file.
6615 * nat/x86-linux-dregs.c: Likewise.
6616 * Makefile.in (HFILES_NO_SRCDIR): Add nat/x86-linux-dregs.h.
6617 (x86-linux-dregs.o): New rule.
6618 * config/i386/linux.mh (NATDEPFILES): Add x86-linux-dregs.o.
6619 * config/i386/linux64.mh (NATDEPFILES): Likewise.
6620 * x86-linux-nat.c: Include nat/x86-linux-dregs.h.
6621 (u_debugreg_offset): Moved to nat/x86-linux-dregs.c.
6622 (x86_linux_dr_get): Likewise.
6623 (x86_linux_dr_set): Likewise.
6624 (x86_linux_dr_get_addr): Likewise.
6625 (x86_linux_dr_get_control): Likewise.
6626 (x86_linux_dr_get_status): Likewise.
6627 (update_debug_registers_callback): Likewise.
6628 (x86_linux_dr_set_control): Likewise.
6629 (x86_linux_dr_set_addr): Likewise.
6630 (x86_linux_update_debug_registers): Likewise.
6632 2015-03-24 Gary Benson <gbenson@redhat.com>
6634 * x86-linux-nat.c (x86_linux_update_debug_registers):
6635 New function, factored out from...
6636 (x86_linux_prepare_to_resume): ...this.
6638 2015-03-24 Gary Benson <gbenson@redhat.com>
6640 * x86-linux-nat.c (x86_linux_dr_get): Update comments.
6641 (x86_linux_dr_set): Likewise.
6642 (x86_linux_dr_get_addr): Likewise.
6643 (x86_linux_dr_get_control): Likewise.
6644 (x86_linux_dr_get_status): Likewise.
6645 (update_debug_registers_callback): Likewise.
6646 (x86_linux_dr_set_control): Likewise.
6647 (x86_linux_dr_set_addr): Likewise.
6648 (x86_linux_prepare_to_resume): Likewise.
6649 (x86_linux_new_thread): Likewise.
6651 2015-03-24 Gary Benson <gbenson@redhat.com>
6653 * x86-linux-nat.c (x86_linux_dr_set_addr): Update assertion.
6654 (x86_linux_new_thread): Rename argument.
6656 2015-03-24 Gary Benson <gbenson@redhat.com>
6658 * nat/x86-linux.h: New file.
6659 * nat/x86-linux.c: Likewise.
6660 * Makefile.in (HFILES_NO_SRCDIR): Add nat/x86-linux.h.
6661 (x86-linux.o): New rule.
6662 * config/i386/linux.mh (NATDEPFILES): Add x86-linux.o.
6663 * config/i386/linux64.mh (NATDEPFILES): Likewise.
6664 * nat/linux-nat.h (struct arch_lwp_info): New forward declaration.
6665 (lwp_set_arch_private_info): New declaration.
6666 (lwp_arch_private_info): Likewise.
6667 * linux-nat.c (lwp_set_arch_private_info): New function.
6668 (lwp_arch_private_info): Likewise.
6669 * x86-linux-nat.c: Include nat/x86-linux.h.
6670 (arch_lwp_info): Removed structure.
6671 (update_debug_registers_callback):
6672 Use lwp_set_debug_registers_changed.
6673 (x86_linux_prepare_to_resume): Use lwp_debug_registers_changed
6674 and lwp_set_debug_registers_changed.
6675 (x86_linux_new_thread): Use lwp_set_debug_registers_changed.
6677 2015-03-24 Gary Benson <gbenson@redhat.com>
6679 * nat/linux-nat.h (ptid_of_lwp): New declaration.
6680 (lwp_is_stopped): Likewise.
6681 (lwp_stop_reason): Likewise.
6682 * linux-nat.c (ptid_of_lwp): New function.
6683 (lwp_is_stopped): Likewise.
6684 (lwp_is_stopped_by_watchpoint): Likewise.
6685 * x86-linux-nat.c (update_debug_registers_callback):
6687 (x86_linux_prepare_to_resume): Use ptid_of_lwp and
6690 2015-03-24 Gary Benson <gbenson@redhat.com>
6692 * linux-nat.h (linux_stop_lwp): Move declaration to...
6693 * nat/linux-nat.h (linux_stop_lwp): New declaration.
6695 2015-03-24 Gary Benson <gbenson@redhat.com>
6697 * linux-nat.h: Include nat/linux-nat.h.
6698 (iterate_over_lwps): Move declaration to nat/linux-nat.h.
6699 * nat/linux-nat.h (struct lwp_info): New forward declaration.
6700 (iterate_over_lwps_ftype): New typedef.
6701 (iterate_over_lwps): New declaration.
6702 * linux-nat.h (iterate_over_lwps): Update comment. Use
6703 iterate_over_lwps_ftype. Update callback return value check.
6705 2015-03-24 Gary Benson <gbenson@redhat.com>
6707 * x86-nat.h (x86_debug_reg_state): Move declaration to...
6708 * nat/x86-dregs.h (x86_debug_reg_state): New declaration.
6710 2015-03-24 Gary Benson <gbenson@redhat.com>
6712 * nat/linux-nat.h (current_lwp_ptid): New declaration.
6713 * linux-nat.c (current_lwp_ptid): New function.
6714 * x86-linux-nat.c: Include nat/linux-nat.h.
6715 (x86_linux_dr_get_addr): Use current_lwp_ptid.
6716 (x86_linux_dr_get_control): Likewise.
6717 (x86_linux_dr_get_status): Likewise.
6718 (x86_linux_dr_set_control): Likewise.
6719 (x86_linux_dr_set_addr): Likewise.
6721 2015-03-24 Antoine Tremblay <antoine.tremblay@ericsson.com>
6723 PR breakpoints/16466
6724 * breakpoint.c (create_breakpoint): Set thread on breakpoint struct.
6726 2015-03-23 Joel Brobecker <brobecker@adacore.com>
6728 * ser-mingw.c (ser_windows_setparity): Fix indentation.
6729 * ser-unix.c (hardwire_setparity): Likewise.
6731 2015-03-23 Yurij Grechishhev <yurij.grechishhev@gmail.com>
6733 * NEWS: Mention set/show serial parity command.
6734 * monitor.c (monitor_open): Call serial_setparity.
6735 * remote.c (remote_open_1): Likewise.
6736 * ser-base.c (ser_base_serparity): New function.
6737 * ser-base.h (ser_base_setparity): Add declaration.
6738 * ser-go32.c (dos_ops): Set "setparity" field.
6739 * ser-mingw.c (ser_windows_raw): Do not set state.fParity and
6741 (ser_windows_setparity): New function.
6742 (hardwire_ops): Add ser_windows_setparity.
6743 (tty_ops): Add NULL for setparity field.
6744 (pipe_ops): Add ser_base_setparity.
6745 (tcp_ops): Likewise.
6746 * ser-pipe.c (pipe_ops): Likewise.
6747 * ser-tcp.c (tcp_ops): Likewise.
6748 * ser-unix.c (hardwire_setparity): Add declaration.
6749 (hardwire_raw): Don't reset PARENB flag.
6750 (hardwire_setparity): New function.
6751 (hardwire_ops): Add hardwire_setparity.
6752 * serial.c (serial_setparity): New function.
6753 (serial_parity): New global.
6754 (parity_none, parity_odd, parity_even, parity_enums, parity):
6756 (set_parity): New function.
6757 (_initialize_serial): Add set/show serial parity commands.
6758 * serial.h (GDBPARITY_NONE): Define.
6759 (GDBPARITY_ODD): Define.
6760 (GDBPARITY_EVEN): Define.
6761 (serial_setparity) Add declaration.
6762 (struct serial_ops): Add setparity field.
6763 * target.h (serial_parity): Add declaration.
6765 2015-03-23 Keith Seitz <keiths@redhat.com>
6767 * linespec.c (linespec_lexer_lex_keyword): Update comment.
6769 2015-03-23 Keith Seitz <keiths@redhat.com>
6771 * breakpoint.c (parse_breakpoint_sals): Use
6772 linespec_lexer_lex_keyword to ascertain if the user specified
6774 * linespec.c [IF_KEYWORD_INDEX]: Define.
6775 (linespec_lexer_lex_keyword): Export.
6776 (struct ls_parser) <keyword_ok>: Remove.
6777 A keyword is only a keyword if not followed by another keyword.
6778 (linespec_lexer_lex_one): Remove keyword_ok handling.
6779 Add comment explaining why the parsing stream is not advanced
6780 when a keyword is seen.
6781 (parse_linespec): Remove parser->keyword_ok.
6782 * linespec.h (linespec_lexer_lex_keyword): Add declaration.
6784 2015-03-23 Keith Seitz <keiths@redhat.com>
6787 * dwarf2read.c (dwarf2_add_member_fn): Issue a complaint
6788 if we find a static method with DW_AT_vtable_elem_location.
6790 2015-03-21 Eli Zaretskii <eliz@gnu.org>
6792 * tui/tui-io.c (tui_expand_tabs): Reinitialize the column counter
6793 before the second loop, to avoid undefined behavior. Reported by
6794 Anton Blanchard <anton@samba.org>.
6796 2015-03-20 Keven Boell <keven.boell@intel.com>
6798 * gdbtypes.c (resolve_dynamic_type_internal): Adapt
6799 data_location usage to linked list.
6800 (resolve_dynamic_type_internal): Adapt data_location to
6802 (get_dyn_prop, add_dyn_prop, copy_dynamic_prop_list): New function.
6803 (copy_type_recursive, copy_type): Add copy of linked list.
6804 * gdbtypes.h (enum dynamic_prop_node_kind): New enum.
6805 (struct dynamic_prop_list): New struct.
6806 * dwarf2read.c (set_die_type): Set data_location data.
6808 2015-03-20 Pedro Alves <palves@redhat.com>
6810 * i386-sol2-tdep.c (i386_sol2_static_transform_name): Move "p" to
6811 inner block and make it const.
6812 * machoread.c (get_archive_prefix_len): Make "lparen" const.
6814 2015-03-20 Pedro Alves <palves@redhat.com>
6816 * breakpoint.c (set_breakpoint_condition): Make argument "exp" const.
6817 * breakpoint.h (set_breakpoint_condition): Update declaration.
6819 2015-03-20 Pedro Alves <palves@redhat.com>
6821 * tui/tui-io.c (tui_expand_tabs): Make "s1" const.
6823 2015-03-20 Pedro Alves <palves@redhat.com>
6825 * xcoffread.c (scan_xcoff_symtab): Make "p" and "q" const.
6827 2015-03-20 Pedro Alves <palves@redhat.com>
6829 * remote-m32r-sdi.c (m32r_open): Make "port_str" const.
6831 2015-03-20 Pedro Alves <palves@redhat.com>
6833 * nto-tdep.c (nto_find_and_open_solib): Make "endian" const.
6834 (nto_init_solib_absolute_prefix): Likewise.
6836 2015-03-20 Pedro Alves <palves@redhat.com>
6838 * sparc-sol2-tdep.c (sparc_sol2_static_transform_name): Make "p" const.
6839 * spu-tdep.c (spu_gdbarch_init): Make "name" const.
6841 2015-03-20 Jan Kratochvil <jan.kratochvil@redhat.com>
6843 * config/djgpp/README: Remove gdb.hp.
6845 2015-03-20 Yao Qi <yao.qi@linaro.org>
6847 * aarch64-tdep.c (aarch64_gdbarch_init): Don't call
6848 set_gdbarch_cannot_step_breakpoint.
6850 2015-03-19 Pedro Alves <palves@redhat.com>
6852 * linux-nat.c (linux_resume_one_lwp): Rename to ...
6853 (linux_resume_one_lwp_throw): ... this. Don't handle ESRCH here,
6854 instead call perror_with_name.
6855 (check_ptrace_stopped_lwp_gone): New function.
6856 (linux_resume_one_lwp): Reimplement as wrapper around
6857 linux_resume_one_lwp_throw that swallows errors if the LWP is
6859 (resume_stopped_resumed_lwps): Try register reads in TRY/CATCH and
6860 swallows errors if the LWP is gone. Use
6861 linux_resume_one_lwp_throw instead of linux_resume_one_lwp.
6863 2015-03-19 Pedro Alves <palves@redhat.com>
6865 * linux-nat.c (status_callback): Return early if the LWP has no
6868 2015-03-19 Pedro Alves <palves@redhat.com>
6870 * linux-nat.c (select_event_lwp_callback): Update comment to no
6871 longer mention SIGTRAP.
6873 2015-03-18 Tristan Gingold <gingold@adacore.com>
6875 * amd64-windows-tdep.c (amd64_windows_find_unwind_info): Move
6876 redirection code to ...
6877 (amd64_windows_frame_decode_insns): ... Here. Fix in prologue
6878 checks. Fix SAVE_NONVOL operations. Add debug code and comments.
6880 2015-03-18 Gary Benson <gbenson@redhat.com>
6882 (remote_protocol_features): Remove the "vFile:fstat" feature.
6883 (remote_hostio_fstat): Probe for "vFile:fstat" support.
6885 2015-03-11 Yao Qi <yao.qi@linaro.org>
6888 * aarch64-linux-tdep.c: Include xml-syscall.h
6889 (aarch64_linux_get_syscall_number): New function.
6890 (aarch64_linux_init_abi): Call
6891 set_gdbarch_get_syscall_number.
6892 * syscalls/aarch64-linux.xml: New file.
6894 2015-03-17 Yurij Grechishhev <yurij.grechishhev@gmail.com>
6896 * ser-base.h (ser_base_setstopbits): Change second argument name
6897 from "rate" to "num".
6899 2015-03-17 Gary Benson <gbenson@redhat.com>
6900 Luke Allardyce <lukeallardyce@gmail.com>
6903 * common/common-remote-fileio.h (sys/stat.h): New include.
6904 (stuct stat): Remove forward declaration.
6906 2015-03-16 John Baldwin <jhb@FreeBSD.org>
6908 * fbsd-tdep.c (fbsd_make_corefile_notes): Fetch all target registers
6909 before writing core register notes.
6911 2015-03-16 Yuanhui Zhang <asmwarrior@gmail.com>
6912 Pedro Alves <palves@redhat.com>
6914 * gdb_curses.h (tgetnum): Mark with EXTERN_C.
6915 * stub-termcap.c (tgetent, tgetnum, tgetflag, tgetstr, tputs)
6916 (tgoto): Wrap with extern "C".
6918 2015-03-16 Pedro Alves <palves@redhat.com>
6919 Yuanhui Zhang <asmwarrior@gmail.com>
6921 * stub-termcap.c (tputs): Change prototype.
6923 2015-03-16 Yuanhui Zhang <asmwarrior@gmail.com>
6924 Pedro Alves <palves@redhat.com>
6926 * windows-nat.c (struct thread_info_struct): Rename to ...
6927 (struct windows_thread_info_struct): ... this.
6928 (thread_info): Rename to ...
6929 (windows_thread_info): ... this.
6932 2015-03-14 Jan Kratochvil <jan.kratochvil@redhat.com>
6933 Pedro Alves <palves@redhat.com>
6935 * NEWS: New Removed targets and native configurations.
6937 2015-03-13 Jan Kratochvil <jan.kratochvil@redhat.com>
6940 * Makefile.in (ALL_64_TARGET_OBS): Remove ia64-hpux-tdep.o.
6941 (ALL_TARGET_OBS): Remove hppa-hpux-tdep.o, solib-som.o and solib-pa64.o.
6942 (HFILES_NO_SRCDIR): Remove solib-som.h, inf-ttrace.h, solib-pa64.h and
6943 ia64-hpux-tdep.h, solib-ia64-hpux.h.
6944 (ALLDEPFILES): Remove hppa-hpux-tdep.c, hppa-hpux-nat.c,
6945 ia64-hpux-nat.c, ia64-hpux-tdep.c, somread.c and solib-som.c.
6946 * config/djgpp/fnchange.lst: Remove hppa-hpux-nat.c and
6948 * config/ia64/hpux.mh: Remove file.
6949 * config/pa/hpux.mh: Remove file.
6950 * configure: Rebuilt.
6951 * configure.ac (dlgetmodinfo, somread.o): Remove.
6952 * configure.host (hppa*-*-hpux*, ia64-*-hpux*): Make them obsolete.
6953 (ia64-*-hpux*): Remove its float format exception.
6954 * configure.tgt (hppa*-*-hpux*, ia64-*-hpux*): Make them obsolete.
6955 * hppa-hpux-nat.c: Remove file.
6956 * hppa-hpux-tdep.c: Remove file.
6957 * hppa-tdep.c (struct hppa_unwind_info, struct hppa_objfile_private):
6958 Move them here from hppa-tdep.h
6959 (hppa_objfile_priv_data, hppa_init_objfile_priv_data): Make it static.
6960 (hppa_frame_prev_register_helper): Remove HPPA_FLAGS_REGNUM exception.
6961 * hppa-tdep.h (struct hppa_unwind_info, struct hppa_objfile_private):
6962 Move them to hppa-tdep.c.
6963 (hppa_objfile_priv_data, hppa_init_objfile_priv_data): Remove
6965 * ia64-hpux-nat.c: Remove file.
6966 * ia64-hpux-tdep.c: Remove file.
6967 * ia64-hpux-tdep.h: Remove file.
6968 * inf-ttrace.c: Remove file.
6969 * inf-ttrace.h: Remove file.
6970 * solib-ia64-hpux.c: Remove file.
6971 * solib-ia64-hpux.h: Remove file.
6972 * solib-pa64.c: Remove file.
6973 * solib-pa64.h: Remove file.
6974 * solib-som.c: Remove file.
6975 * solib-som.h: Remove file.
6976 * somread.c: Remove file.
6978 2015-03-13 John Baldwin <jhb@FreeBSD.org>
6980 * configure.ac: AC_SEARCH_LIBS(kinfo_getvmmap, util).
6981 * config.in: Regenerate.
6982 * configure: Regenerate.
6983 * fbsd-nat.c [!HAVE_KINFO_GETVMMAP] (fbsd_read_mapping): Don't
6985 (fbsd_find_memory_regions): Use kinfo_getvmmap to
6986 enumerate memory regions if present.
6988 2015-03-13 John Baldwin <jhb@FreeBSD.org>
6990 * amd64fbsd-tdep.c (amd64fbsd_sigtramp_p): Style fixes.
6991 * i386fbsd-tdep.c: Fix style in various gdb_static_assert
6993 (i386fbsd_sigtramp_p): Likewise.
6995 2015-03-12 John Baldwin <jhb@FreeBSD.org>
6997 * MAINTAINERS (Write After Approval): Add John Baldwin.
6999 2015-03-12 Gary Benson <gbenson@redhat.com>
7001 * solib.c (_initialize_solib): Make "set/show sysroot" use
7002 add_setshow_optional_filename_cmd so it can be restored to
7003 empty after being set.
7005 2015-03-11 Sergio Durigan Junior <sergiodj@redhat.com>
7007 * Makefile.in (SFILES): New source break-catch-syscall.c.
7008 (COMMON_OBS): New object break-catch-syscall.o.
7009 * break-catch-syscall.c: New file.
7010 * breakpoint.c: Remove inclusion of "xml-syscall.h".
7011 (syscall_catchpoint_p): Move declaration to break-catch-syscall.c
7012 (struct syscall_catchpoint): Likewise.
7013 (dtor_catch_syscall): Likewise.
7014 (catch_syscall_inferior_data): Likewise.
7015 (struct catch_syscall_inferior_data): Likewise.
7016 (get_catch_syscall_inferior_data): Likewise.
7017 (catch_syscall_inferior_data_cleanup): Likewise.
7018 (insert_catch_syscall): Likewise.
7019 (remove_catch_syscall): Likewise.
7020 (breakpoint_hit_catch_syscall): Likewise.
7021 (print_it_catch_syscall): Likewise.
7022 (print_one_catch_syscall): Likewise.
7023 (print_mention_catch_syscall): Likewise.
7024 (print_recreate_catch_syscall): Likewise.
7025 (catch_syscall_breakpoint_ops): Likewise.
7026 (syscall_catchpoint_p): Likewise.
7027 (create_syscall_event_catchpoint): Likewise.
7028 (catch_syscall_split_args): Likewise.
7029 (catch_syscall_command_1): Likewise.
7030 (is_syscall_catchpoint_enabled): Likewise.
7031 (catch_syscall_enabled): Likewise.
7032 (catching_syscall_number): Likewise.
7033 (catch_syscall_completer): Likewise.
7034 (clear_syscall_counts): Likewise.
7035 (initialize_breakpoint_ops): Move initialization of syscall
7036 catchpoints to break-catch-syscall.c.
7037 (_initialize_breakpoint): Move code related to syscall catchpoints
7038 to break-catch-syscall.c.
7040 2015-03-11 Sergio Durigan Junior <sergiodj@redhat.com>
7042 * breakpoint.c (breakpoint_find_if): New function.
7043 * breakpoint.h (breakpoint_find_if): New prototype.
7045 2015-03-11 Gary Benson <gbenson@redhat.com>
7047 * remote-fileio.h (remote_fileio_to_host_stat): New declaration.
7048 * remote-fileio.c (remote_fileio_to_host_uint): New function.
7049 (remote_fileio_to_host_ulong): Likewise.
7050 (remote_fileio_to_host_mode): Likewise.
7051 (remote_fileio_to_host_time): Likewise.
7052 (remote_fileio_to_host_stat): Likewise.
7053 * remote.c (PACKET_vFile_fstat): New enum value.
7054 (remote_protocol_features): Register the "vFile:fstat" feature.
7055 (remote_hostio_fstat): New function.
7056 (remote_bfd_iovec_stat): Use the above.
7057 (_initialize_remote): Register new "set/show remote
7058 hostio-fstat-packet" command.
7059 * symfile.c (separate_debug_file_exists): Update comment.
7060 * NEWS: Announce new vFile:fstat packet.
7062 2015-03-11 Gary Benson <gbenson@redhat.com>
7064 * common/common-remote-fileio.h: New file.
7065 * common/common-remote-fileio.c: Likewise.
7066 * Makefile.in (SFILES): Add common/common-remote-fileio.c.
7067 (HFILES_NO_SRCDIR): Add common/common-remote-fileio.h.
7068 (COMMON_OBS): Add common-remote-fileio.o.
7069 (common-remote-fileio.o): New rule.
7070 * remote-fileio.h (common-remote-fileio.h): New include.
7071 * remote-fileio.c (gdb/fileio.h): Do not include.
7072 (remote_fileio_to_be): Moved to common-remote-fileio.h.
7073 (remote_fileio_to_fio_uint): Likewise.
7074 (remote_fileio_to_fio_time): Likewise.
7075 (remote_fileio_mode_to_target): Moved to common-remote-fileio.c.
7076 (remote_fileio_to_fio_mode): Likewise.
7077 (remote_fileio_to_fio_ulong): Likewise.
7078 (remote_fileio_to_fio_stat): Likewise.
7080 2015-03-11 Andy Wingo <wingo@igalia.com>
7082 * guile/scm-value.c (gdbscm_value_dynamic_type): Fix typo in which
7083 we were checking the cached type, not the cached dynamic type.
7085 2015-03-11 Andy Wingo <wingo@igalia.com>
7087 * guile/scm-cmd.c (cmdscm_destroyer): Don't xfree the name and
7088 other strings, as these are on the GC'd heap, and will be
7089 collected along with the smob.
7091 2015-03-11 Andy Wingo <wingo@igalia.com>
7093 * guile/scm-objfile.c (gdbscm_objfile_progspace): New function.
7094 (objfile_functions): Bind gdbscm_objfile_progspace to
7096 * guile/lib/gdb.scm: Add objfile-progspace to exports.
7098 2015-03-11 Andy Wingo <wingo@igalia.com>
7100 * guile/guile.c (_initialize_guile): Disable automatic
7101 finalization, if Guile offers us that possibility.
7102 * guile/guile.c (call_initialize_gdb_module):
7103 * guile/scm-safe-call.c (gdbscm_with_catch): Arrange to run
7104 finalizers in appropriate places.
7105 * configure.ac (AC_TRY_LIBGUILE): Add a check for
7106 scm_set_automatic_finalization_enabled.
7107 * configure: Regenerated.
7109 2015-03-11 Andreas Arnez <arnez@linux.vnet.ibm.com>
7111 * s390-linux-tdep.c (s390_skip_prologue): Skip the prologue using
7114 2015-03-11 Andreas Arnez <arnez@linux.vnet.ibm.com>
7116 * s390-linux-nat.c (struct arch_lwp_info): New.
7117 (s390_fix_watch_points): Rename to...
7118 (s390_prepare_to_resume): ...this. Skip the PER info update
7119 unless the watch points have changed.
7120 (s390_refresh_per_info, s390_new_thread): New functions.
7121 (s390_insert_watchpoint): Call s390_refresh_per_info instead of
7122 s390_fix_watch_points.
7123 (s390_remove_watchpoint): Likewise.
7124 (_initialize_s390_nat): Reflect renaming of s390_fix_watch_points.
7125 Register s390_prepare_to_resume.
7127 2015-03-09 Pedro Alves <palves@redhat.com>
7130 2015-03-07 Pedro Alves <palves@redhat.com>
7131 * common/gdb_socket.h: New file.
7132 * ser-tcp.c: Include gdb_socket.h. Don't include netinet/in.h nor
7134 (net_open): Use union gdb_sockaddr_u.
7136 2015-03-07 Pedro Alves <palves@redhat.com>
7138 * configure.ac (build_warnings): Move -Wmissing-prototypes
7139 -Wdeclaration-after-statement -Wmissing-parameter-type
7140 -Wold-style-declaration -Wold-style-definition to the C-specific
7142 * configure: Regenerate.
7144 2015-03-07 Pedro Alves <palves@redhat.com>
7146 * common/gdb_socket.h: New file.
7147 * ser-tcp.c: Include gdb_socket.h. Don't include netinet/in.h nor
7149 (net_open): Use union gdb_sockaddr_u.
7151 2015-03-07 Pedro Alves <palves@redhat.com>
7153 * common/common-exceptions.c [!__cplusplus] (enum catcher_state)
7154 (exceptions_state_mc_action_iter)
7155 (exceptions_state_mc_action_iter_1, exceptions_state_mc_catch):
7157 [__cplusplus] (try_scope_depth): New global.
7158 [__cplusplus] (exception_try_scope_entry)
7159 (exception_try_scope_exit, gdb_exception_sliced_copy)
7160 (exception_rethrow): New functions.
7161 (throw_exception): In C++ mode, throw
7162 gdb_exception_RETURN_MASK_QUIT for RETURN_QUIT and
7163 gdb_exception_RETURN_MASK_ERROR for RETURN_ERROR.
7164 (throw_it): In C++ mode, use try_scope_depth.
7165 * common/common-exceptions.h [!__cplusplus]
7166 (exceptions_state_mc_action_iter)
7167 (exceptions_state_mc_action_iter_1, exceptions_state_mc_catch):
7169 [__cplusplus] (exception_try_scope_entry)
7170 (exception_try_scope_exit, exception_rethrow): Declare.
7171 [__cplusplus] (struct exception_try_scope): New struct.
7172 [__cplusplus] (TRY, CATCH, END_CATCH): Reimplement on top of real
7174 (struct gdb_exception_RETURN_MASK_ALL)
7175 (struct gdb_exception_RETURN_MASK_ERROR)
7176 (struct gdb_exception_RETURN_MASK_QUIT): New types.
7178 2015-03-07 Pedro Alves <palves@redhat.com>
7180 * main.c (handle_command_errors): Remove volatile qualifier from
7183 2015-03-07 Pedro Alves <palves@redhat.com>
7185 * breakpoint.c (save_breakpoints): Adjust to avoid code between
7187 * gdbtypes.c (safe_parse_type): Remove empty line.
7188 (types_deeply_equal):
7189 * guile/scm-frame.c (gdbscm_frame_name):
7190 * linux-thread-db.c (find_new_threads_once):
7191 * python/py-breakpoint.c (bppy_get_commands):
7192 * record-btrace.c (record_btrace_insert_breakpoint)
7193 (record_btrace_remove_breakpoint, record_btrace_start_replaying)
7194 (record_btrace_start_replaying): Adjust to avoid code between TRY
7197 2015-03-07 Pedro Alves <palves@redhat.com>
7199 * common/common-exceptions.c (struct catcher) <exception>: No
7200 longer a pointer to volatile exception. Now an exception value.
7201 <mask>: Delete field.
7202 (exceptions_state_mc_init): Remove all parameters. Adjust.
7203 (exceptions_state_mc): No longer pop the catcher here.
7204 (exceptions_state_mc_catch): New function.
7205 (throw_exception): Adjust.
7206 * common/common-exceptions.h (exceptions_state_mc_init): Remove
7208 (exceptions_state_mc_catch): Declare.
7209 (TRY_CATCH): Rename to ...
7210 (TRY): ... this. Remove EXCEPTION and MASK parameters.
7211 (CATCH, END_CATCH): New.
7212 All callers adjusted.
7214 2015-03-07 Tom Tromey <tromey@redhat.com>
7216 * top.c (quit_force): Inline and delete DO_TRY, DO_PRINT_EX.
7218 2015-03-07 Pedro Alves <palves@redhat.com>
7220 * amd64-tdep.c (amd64_frame_cache, amd64_sigtramp_frame_cache)
7221 (amd64_epilogue_frame_cache): Normal exception handling code.
7222 * break-catch-throw.c (check_status_exception_catchpoint)
7223 (re_set_exception_catchpoint): Ditto.
7224 * cli/cli-interp.c (safe_execute_command):
7225 * cli/cli-script.c (script_from_file): Ditto.
7226 * compile/compile-c-symbols.c (generate_c_for_for_one_variable):
7228 * compile/compile-object-run.c (compile_object_run): Ditto.
7229 * cp-abi.c (baseclass_offset): Ditto.
7230 * cp-valprint.c (cp_print_value): Ditto.
7231 * exceptions.c (catch_exceptions_with_msg):
7232 * frame-unwind.c (frame_unwind_try_unwinder): Ditto.
7233 * frame.c (get_frame_address_in_block_if_available): Ditto.
7234 * i386-tdep.c (i386_frame_cache, i386_epilogue_frame_cache)
7235 (i386_sigtramp_frame_cache): Ditto.
7236 * infcmd.c (post_create_inferior): Ditto.
7237 * linespec.c (parse_linespec, find_linespec_symbols):
7238 * p-valprint.c (pascal_object_print_value): Ditto.
7239 * parse.c (parse_expression_for_completion): Ditto.
7240 * python/py-finishbreakpoint.c (bpfinishpy_init): Ditto.
7241 * remote.c (remote_get_noisy_reply): Ditto.
7242 * s390-linux-tdep.c (s390_frame_unwind_cache): Ditto.
7243 * solib-svr4.c (solib_svr4_r_map): Ditto.
7245 2015-03-06 Gary Benson <gbenson@redhat.com>
7247 * common/common-utils.h (startswith): New inline function.
7248 All places where this logic was used updated to use the above.
7250 2015-03-05 Pedro Alves <palves@redhat.com>
7253 * mem-break.c (default_memory_insert_breakpoint): Set shadow_len
7254 after reading the breakpoint's shadow memory.
7256 2015-03-05 Mark Kettenis <kettenis@gnu.org>
7258 * hppabsd-nat.c: Remove file.
7259 * hppaobsd-nat.c: New file.
7260 * Makefile.in (ALLDEPFILES): Remove hppabsd-nat.c. Add
7262 * config/pa/obsd.mh (NATDEPFILES): Replace hppabsd-nat.o with
7265 2015-03-04 Pedro Alves <palves@redhat.com>
7267 * target.h (struct target_ops) <to_decr_pc_after_break>: Delete.
7268 (target_decr_pc_after_break): Delete declaration.
7269 * target.c (default_target_decr_pc_after_break)
7270 (target_decr_pc_after_break): Delete.
7271 * linux-nat.c (check_stopped_by_breakpoint, linux_nat_wait_1): Use
7272 gdbarch_decr_pc_after_break instead of target_decr_pc_after_break.
7273 * linux-thread-db.c (check_event): Likewise.
7274 * infrun.c (adjust_pc_after_break): Likewise.
7275 * darwin-nat.c (cancel_breakpoint): Likewise.
7276 * aix-thread.c (aix_thread_wait): Likewise.
7277 * target-delegates.c: Regenerate.
7279 2015-03-04 Pedro Alves <palves@redhat.com>
7281 * linux-nat.c (save_sigtrap): Check for breakpoints before
7282 checking watchpoints.
7283 (status_callback) [USE_SIGTRAP_SIGINFO]: Don't check whether a
7284 breakpoint is inserted if relying on SIGTRAP's siginfo.si_code.
7285 (check_stopped_by_breakpoint) [USE_SIGTRAP_SIGINFO]: Decide whether
7286 a breakpoint triggered based on the SIGTRAP's siginfo.si_code.
7287 (linux_nat_stopped_by_sw_breakpoint)
7288 (linux_nat_supports_stopped_by_sw_breakpoint)
7289 (linux_nat_stopped_by_hw_breakpoint)
7290 (linux_nat_supports_stopped_by_hw_breakpoint): New functions.
7291 (linux_nat_wait_1): Don't re-increment the PC if relying on
7292 SIGTRAP's siginfo->si_code.
7293 (linux_nat_add_target): Install new target methods.
7294 * linux-thread-db.c (check_event): Don't account for breakpoint PC
7295 offset if the target already adjusted the PC.
7296 * nat/linux-ptrace.h (USE_SIGTRAP_SIGINFO): New.
7297 (GDB_ARCH_TRAP_BRKPT): New.
7298 (TRAP_HWBKPT): Define if not already defined.
7300 2015-03-04 Pedro Alves <palves@redhat.com>
7302 * NEWS: Mention the new "swbreak" and "hwbreak" stop reasons.
7303 * remote.c (struct remote_state) <remote_stopped_by_watchpoint_p>:
7305 <stop_reason>: New field.
7306 (PACKET_swbreak_feature, PACKET_hwbreak_feature): New enum values.
7307 (packet_set_cmd_state): New function.
7308 (remote_protocol_features): Register the "swbreak" and "hwbreak"
7310 (remote_query_supported): If not disabled with the corresponding
7311 "set remote foo-packet" command, report support for the swbreak
7312 and hwbreak features.
7313 (struct stop_reply) <remote_stopped_by_watchpoint_p>: Delete
7315 <stop_reason>: New field.
7316 (remote_parse_stop_reply): Handle "swbreak" and "hwbreak".
7317 (remote_wait_as): Adjust.
7318 (remote_stopped_by_sw_breakpoint)
7319 (remote_supports_stopped_by_sw_breakpoint)
7320 (remote_stopped_by_hw_breakpoint)
7321 (remote_supports_stopped_by_hw_breakpoint): New functions.
7322 (remote_stopped_by_watchpoint): New function.
7323 (init_remote_ops): Install them.
7324 (_initialize_remote): Register new "set/show remote
7325 swbreak-feature-packet" and "set/show remote
7326 swbreak-feature-packet" commands.
7328 2015-03-04 Pedro Alves <palves@redhat.com>
7330 * btrace.h: Include target/waitstatus.h.
7331 (struct btrace_thread_info) <stop_reason>: New field.
7332 * record-btrace.c (record_btrace_step_thread): Use
7333 record_check_stopped_by_breakpoint instead of breakpoint_here_p.
7334 (record_btrace_decr_pc_after_break): Delete.
7335 (record_btrace_stopped_by_sw_breakpoint)
7336 (record_btrace_supports_stopped_by_sw_breakpoint)
7337 (record_btrace_stopped_by_hw_breakpoint)
7338 (record_btrace_supports_stopped_by_hw_breakpoint): New functions.
7339 (init_record_btrace_ops): Install them.
7340 * record-full.c (record_full_hw_watchpoint): Delete and replace
7342 (record_full_stop_reason): ... this throughout.
7343 (record_full_exec_insn): Adjust.
7344 (record_full_wait_1): Adjust. No longer re-increment the PC.
7345 (record_full_wait_1): Adjust. Use
7346 record_check_stopped_by_breakpoint instead of breakpoint_here_p.
7347 (record_full_stopped_by_watchpoint): Adjust.
7348 (record_full_stopped_by_sw_breakpoint)
7349 (record_full_supports_stopped_by_sw_breakpoint)
7350 (record_full_supports_stopped_by_sw_breakpoint)
7351 (record_full_stopped_by_hw_breakpoint)
7352 (record_full_supports_stopped_by_hw_breakpoint): New functions.
7353 (init_record_full_ops, init_record_full_core_ops): Install them.
7354 * record.c (record_check_stopped_by_breakpoint): New function.
7355 * record.h: Include target/waitstatus.h.
7356 (record_check_stopped_by_breakpoint): New declaration.
7358 2015-03-04 Pedro Alves <palves@redhat.com>
7360 enum lwp_stop_reason -> enum target_stop_reason
7361 * linux-nat.c (linux_resume_one_lwp, check_stopped_by_watchpoint)
7362 (linux_nat_stopped_by_watchpoint, status_callback)
7363 (linux_nat_wait_1): Adjust.
7364 * linux-nat.h (enum lwp_stop_reason): Delete.
7365 (struct lwp_info) <stop_reason>: Now an enum target_stop_reason.
7366 * x86-linux-nat.c (x86_linux_prepare_to_resume): Adjust.
7367 * target/waitstatus.h (enum target_stop_reason): New.
7369 2015-03-04 Pedro Alves <palves@redhat.com>
7371 * breakpoint.c (need_moribund_for_location_type): New function.
7372 (bpstat_stop_status): Don't skipping checking moribund locations
7373 of breakpoint types which the target tell caused a stop.
7374 (program_breakpoint_here_p): New function, factored out from ...
7375 (bp_loc_is_permanent): ... this.
7376 (update_global_location_list): Don't create a moribund location if
7377 the target supports reporting stops of the type of the removed
7379 * breakpoint.h (program_breakpoint_here_p): New declaration.
7380 * infrun.c (adjust_pc_after_break): Return early if the target has
7381 already adjusted the PC. Add comments.
7382 (handle_signal_stop): If nothing explains a signal, and the target
7383 tells us the stop was caused by a software breakpoint, check if
7384 there's a breakpoint instruction in the memory. If so, adjust the
7385 PC before presenting the stop to the user. Otherwise, ignore the
7386 trap. If nothing explains a signal, and the target tells us the
7387 stop was caused by a hardware breakpoint, ignore the trap.
7388 * target.h (struct target_ops) <to_stopped_by_sw_breakpoint,
7389 to_supports_stopped_by_sw_breakpoint, to_stopped_by_hw_breakpoint,
7390 to_supports_stopped_by_hw_breakpoint>: New fields.
7391 (target_stopped_by_sw_breakpoint)
7392 (target_supports_stopped_by_sw_breakpoint)
7393 (target_stopped_by_hw_breakpoint)
7394 (target_supports_stopped_by_hw_breakpoint): Define.
7395 * target-delegates.c: Regenerate.
7397 2015-03-04 Pedro Alves <palves@redhat.com>
7399 * infrun.c (follow_fork_inferior): Use the whole of the
7400 inferior_ptid and pending_follow.related_pid ptids instead of
7401 building ptids from the process components. Adjust verbose output
7402 to use target_pid_to_str.
7403 * linux-nat.c (linux_child_follow_fork): Use the whole of the
7404 inferior_ptid and pending_follow.related_pid ptids instead of
7405 building ptids from the process components.
7407 2015-03-04 Mark Kettenis <kettenis@gnu.org>
7409 * inf-ptrace.c [PT_GET_PROCESS_STATE]
7410 (inf_ptrace_insert_fork_catchpoint): New function.
7411 (inf_ptrace_remove_fork_catchpoint): New function.
7412 (inf_ptrace_target) [PT_GET_PROCESS_STATE]: Install them.
7414 2015-03-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
7416 * s390-linux-tdep.c (s390_register_name): Return empty string
7417 instead of NULL for registers that shouldn't be visible.
7419 2015-03-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
7421 * s390-linux-tdep.c (s390_gdbarch_init): Use the correct syscall
7422 XML file for 64-bit targets.
7424 2015-03-03 Simon Marchi <simon.marchi@ericsson.com>
7426 * target.h (find_default_create_inferior): Remove declaration.
7427 (find_default_attach): Likewise.
7429 2015-03-03 Pedro Alves <palves@redhat.com>
7431 * inf-ptrace.c (inf_ptrace_resume): Remove spurious whitespace.
7432 Use ptid_get_pid to get the overall process id when resuming all
7435 2015-03-03 Pedro Alves <palves@redhat.com>
7437 * i386-linux-nat.c (i386_linux_resume): Get the ptrace PID out of
7438 the lwp field of ptid. Pass the full ptid to get_thread_regcache.
7439 * inf-ptrace.c (get_ptrace_pid): New function.
7440 (inf_ptrace_resume): Use it.
7441 * linux-nat.c (linux_resume_one_lwp): Pass the LWP's ptid ummodified
7444 2015-03-03 Markus Metzger <markus.t.metzger@intel.com>
7446 * nat/linux-btrace.c: Include sys/utsname.h.
7447 (linux_determine_kernel_ptr_bits): New.
7448 (linux_enable_bts): Call linux_determine_kernel_ptr_bits.
7449 * x86-linux-nat.c (x86_linux_enable_btrace): Do not overwrite non-zero
7452 2015-03-03 Markus Metzger <markus.t.metzger@intel.com>
7454 * btrace.c (ftrace_update_function): Treat return as tailcall for
7455 "_dl_runtime_resolve".
7457 2015-03-03 Markus Metzger <markus.t.metzger@intel.com>
7459 * btrace.h (btrace_function) <lbegin, lend>: Remove.
7460 * btrace.c (ftrace_debug): Do not print the line range.
7461 (ftrace_skip_file, ftrace_update_lines): Remove.
7462 (ftrace_new_function): Remove lbegin and lend initialization.
7463 (btrace_compute_ftrace_bts): Remove call to ftrace_update_lines.
7464 * record-btrace.c (btrace_compute_src_line_range): New.
7465 (btrace_call_history_src_line): Call btrace_compute_src_line_range.
7467 2015-03-02 Pedro Alves <palves@redhat.com>
7469 * infrun.c (follow_exec): Delete all threads of the process except
7470 the event thread. Extended comments.
7472 2015-03-02 Joel Brobecker <brobecker@adacore.com>
7474 * contrib/ari/gdb_ari.sh: Reinstate checks for "true" and "false".
7476 2015-03-02 Joel Brobecker <brobecker@adacore.com>
7478 * utils.h: Remove <stdbool.h> #include.
7479 (producer_is_gcc): Change return type to "int".
7480 * utils.c (producer_is_gcc): Change return type to int.
7481 Return 1 instead of true, and 0 instead of false.
7482 Adjust function documentation accordingly.
7484 2015-03-02 Andreas Arnez <arnez@linux.vnet.ibm.com>
7486 * s390-linux-nat.c (have_regset_vxrs): New static variable.
7487 (s390_linux_fetch_inferior_registers): Handle vector registers, if
7489 (s390_linux_store_inferior_registers): Likewise.
7490 (s390_get_hwcap): Remove function. Embed its logic...
7491 (s390_read_description): ...here. Yield a target description with
7492 vector registers if applicable.
7493 * s390-linux-tdep.c: Include "features/s390-vx-linux64.c",
7494 "features/s390-tevx-linux64.c", "features/s390x-vx-linux64.c", and
7495 "features/s390x-tevx-linux64.c".
7496 (struct gdbarch_tdep) <v0_full_regnum>: New field.
7497 (s390_dwarf_regmap): Add vector registers. Remove bogus entries
7498 for "GNU/Linux-specific registers".
7499 (s390_dwarf_reg_r0l): New enum value.
7500 (s390_dwarf_reg_to_regnum): Support vector registers.
7501 (s390_adjust_frame_regnum): Adjust pseudo DWARF register numbers
7502 of GPR lower halves.
7503 (regnum_is_vxr_full): New function.
7504 (s390_register_name): New function.
7505 (s390_pseudo_register_name): Handle v0-v15, which are composed of
7506 f0-f15 and v0l-v15l.
7507 (s390_pseudo_register_type): Likewise.
7508 (s390_pseudo_register_read): Likewise.
7509 (s390_pseudo_register_write): Likewise.
7510 (s390_value_from_register): Account for the fact that values are
7511 placed left-justified in vector registers.
7512 (s390_pseudo_register_reggroup_p): Add pseudo registers v0-v15 to
7513 the vector reggroup and omit them from the general reggroup.
7514 (s390_regmap_vxrs_low, s390_regmap_vxrs_high): New register maps.
7515 (s390_vxrs_low_regset, s390_vxrs_high_regset): New regsets.
7516 (s390_iterate_over_regset_sections): Add iterations for the two
7518 (s390_core_read_description): Yield a target description with
7519 vector registers if applicable.
7520 (s390_gdbarch_init): Handle target descriptions with vector
7521 registers. Add "register_name" gdbarch method.
7522 (_initialize_s390_tdep): Call new tdesc initialization functions.
7523 * s390-linux-tdep.h (HWCAP_S390_VX): New macro.
7524 (S390_V0_LOWER_REGNUM, S390_V1_LOWER_REGNUM, S390_V2_LOWER_REGNUM)
7525 (S390_V3_LOWER_REGNUM, S390_V4_LOWER_REGNUM, S390_V5_LOWER_REGNUM)
7526 (S390_V6_LOWER_REGNUM, S390_V7_LOWER_REGNUM, S390_V8_LOWER_REGNUM)
7527 (S390_V9_LOWER_REGNUM, S390_V10_LOWER_REGNUM)
7528 (S390_V11_LOWER_REGNUM, S390_V12_LOWER_REGNUM)
7529 (S390_V13_LOWER_REGNUM, S390_V14_LOWER_REGNUM)
7530 (S390_V15_LOWER_REGNUM, S390_V16_REGNUM, S390_V17_REGNUM)
7531 (S390_V18_REGNUM, S390_V19_REGNUM, S390_V20_REGNUM)
7532 (S390_V21_REGNUM, S390_V22_REGNUM, S390_V23_REGNUM)
7533 (S390_V24_REGNUM, S390_V25_REGNUM, S390_V26_REGNUM)
7534 (S390_V27_REGNUM, S390_V28_REGNUM, S390_V29_REGNUM)
7535 (S390_V30_REGNUM, S390_V31_REGNUM): New macros.
7536 (S390_NUM_REGS): Adjust value.
7537 (s390_vxrs_low_regset, s390_vxrs_high_regset): Declare.
7538 (tdesc_s390_vx_linux64, tdesc_s390_tevx_linux64)
7539 (tdesc_s390x_vx_linux64, tdesc_s390x_tevx_linux64): Likewise.
7540 * NEWS: Announce S/390 vector register support.
7542 2015-03-02 Andreas Arnez <arnez@linux.vnet.ibm.com>
7544 * features/s390-tevx-linux64.xml: New file.
7545 * features/s390-vx-linux64.xml: New file.
7546 * features/s390-vx.xml: New file.
7547 * features/s390x-tevx-linux64.xml: New file.
7548 * features/s390x-vx-linux64.xml: New file.
7549 * features/Makefile (WHICH): Add s390-vx-linux64,
7550 s390x-vx-linux64, s390-tevx-linux64, and s390x-tevx-linux64.
7551 (s390-vx-linux64-expedite, s390-tevx-linux64-expedite)
7552 (s390x-vx-linux64-expedite, s390x-tevx-linux64-expedite): New
7554 * features/s390-tevx-linux64.c: New generated file.
7555 * features/s390-vx-linux64.c: Likewise.
7556 * features/s390x-tevx-linux64.c: Likewise.
7557 * features/s390x-vx-linux64.c: Likewise.
7558 * regformats/s390-tevx-linux64.dat: Likewise.
7559 * regformats/s390-vx-linux64.dat: Likewise.
7560 * regformats/s390x-tevx-linux64.dat: Likewise.
7561 * regformats/s390x-vx-linux64.dat: Likewise.
7563 2015-02-28 Doug Evans <xdje42@gmail.com>
7565 * symtab.h (struct symtab) <next>: Fix comment.
7567 2015-02-27 Simon Marchi <simon.marchi@ericsson.com>
7569 * python/python.c (python_GdbModuleDef): Rename GdbMethods to
7572 2015-02-27 Pedro Alves <palves@redhat.com>
7574 * dtrace-probe.c (dtrace_probe_ops): Make extern.
7576 2015-02-27 Pedro Alves <palves@redhat.com>
7578 * common/common-exceptions.h (exception_none): Declare.
7579 * common/common-exceptions.c (exception_none): Moved from
7581 (exceptions_state_mc_init): Use exception_none.
7582 * exceptions.c (exception_none): Move to
7583 common/common-exceptions.c.
7584 * exceptions.h (exception_none): Move to
7585 common/common-exceptions.h.
7587 2015-02-27 Pedro Alves <palves@redhat.com>
7589 * main.c (catch_command_errors, catch_command_errors_const):
7590 Remove 'mask' argument. Adjust.
7591 (captured_main): Adjust callers.
7593 2015-02-27 Pedro Alves <palves@redhat.com>
7595 * python/python-internal.h: Include "extension-priv.h".
7597 2015-02-27 Pedro Alves <palves@redhat.com>
7599 * breakpoint.h (enum print_stop_action): Move further up in the
7602 2015-02-27 Pedro Alves <palves@redhat.com>
7604 * gdbarch.sh: Include regcache.h.
7605 * gdbarch.h: Regenerate.
7607 2015-02-27 Pedro Alves <palves@redhat.com>
7609 * arm-tdep.c (decode_insn) <arm_handle_insn, thumb_handle_insn>:
7610 Remove duplicate const.
7611 * sparc-sol2-tdep.c (sparc_sol2_static_transform_name): Remove
7614 2015-02-27 Pedro Alves <palves@redhat.com>
7616 * cp-valprint.c (vtbl_ptr_name): Use EXPORTED_CONST.
7617 * guile/guile.c (extension_language_guile): Use EXPORTED_CONST.
7618 * features/feature_to_c.sh: Tag the generated xml_builtin array
7619 with extern const in C++ mode.
7621 2015-02-27 Tom Tromey <tromey@redhat.com>
7623 * minidebug.c (struct lzma_stream): Rename to ...
7624 (struct gdb_lzma_stream): ... this.
7625 (lzma_open, lzma_pread, lzma_close, lzma_stat): Adjust.
7627 2015-02-27 Pedro Alves <palves@redhat.com>
7629 * mi/mi-cmd-stack.c (mi_apply_ext_lang_frame_filter): New
7631 (mi_cmd_stack_list_locals, mi_cmd_stack_list_args)
7632 (mi_cmd_stack_list_variables): Use it.
7634 2015-02-27 Pedro Alves <palves@redhat.com>
7636 * x86-linux-nat.c (u_debugreg_offset): New function.
7637 (x86_linux_dr_get, x86_linux_dr_set): Use it.
7639 2015-02-27 Pedro Alves <palves@redhat.com>
7641 * nat/x86-dregs.h (enum target_hw_bp_type): Remove forward
7643 Include break-common.h.
7645 2015-02-27 Tom Tromey <tromey@redhat.com>
7646 Pedro Alves <palves@redhat.com>
7648 * arm-tdep.c (set_fp_model_sfunc, arm_set_abi): Use 'int' for
7649 local used to iterate over enums.
7650 * completer.c (signal_completer): Likewise.
7651 * i386-tdep.c (i386_stap_parse_special_token): Likewise.
7652 * rs6000-tdep.c (powerpc_set_vector_abi): Likewise.
7653 * tui/tui-data.c (tui_next_win, tui_prev_win): Likewise.
7654 * tui/tui-layout.c (next_layout, prev_layout): Likewise.
7655 * tui/tui-win.c (tui_refresh_all_win, tui_rehighlight_all)
7656 (tui_resize_all, tui_set_focus_command, tui_all_windows_info): Likewise.
7657 * tui-wingeneral.c (tui_refresh_all): Likewise.
7659 2015-02-27 Pedro Alves <palves@redhat.com>
7661 * target.h: Include "infrun.h".
7663 2015-02-27 Pedro Alves <palves@redhat.com>
7665 * gdb_proc_service.h: Wrap with EXTERN_C_PUSH/EXTERN_C_POP.
7667 2015-02-27 Pedro Alves <palves@redhat.com>
7669 * common/agent.h (IPA_SYM_EXPORTED_NAME): New.
7671 * common/common-defs.h (EXTERN_C_PUSH, EXTERN_C_POP): New macros.
7673 2015-02-27 Pedro Alves <palves@redhat.com>
7675 * cli-out.c (_rl_erase_entire_line): Move declaration out of
7676 cli_mld_erase_entire_line, and make it extern "C".
7677 * common/common-defs.h (EXTERN_C): New.
7678 * completer.c (_rl_completion_prefix_display_length)
7679 (_rl_print_completions_horizontally, QSFUNC): Move declarations
7680 out of gdb_display_match_list_1.
7681 (_rl_qsort_string_compare): Move declaration out of
7682 gdb_display_match_list_1, and make it extern "C".
7683 * defs.h (re_comp): Use EXTERN_C.
7684 * maint.c (_mcleanup): Move declaration out of mcleanup_wrapper,
7685 and make it extern "C".
7686 (monstartup): Move declaration out of maintenance_set_profile_cmd,
7687 and make it extern "C".
7688 (main): Move declaration out of maintenance_set_profile_cmd.
7689 * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason_string): Use
7692 2015-02-27 Pedro Alves <palves@redhat.com>
7694 * python/python.c (GdbMethods): Rename to ...
7695 (python_GdbMethods): ... this and make extern.
7696 (GdbModuleDef): Rename to ...
7697 (python_GdbModuleDef): ... this and make extern.
7699 2015-02-27 Pedro Alves <palves@redhat.com>
7701 * record-btrace.c (set_record_btrace_cmdlist)
7702 (show_record_btrace_cmdlist): Remove redefinitions.
7704 2015-02-27 Tom Tromey <tromey@redhat.com>
7705 Pedro Alves <palves@redhat.com>
7707 * dwarf2-frame.c (enum cfa_how_kind, struct
7708 dwarf2_frame_state_reg_info): Move out of struct
7710 * dwarf2read.c (struct tu_stats): Move out of struct
7712 (struct file_entry): Move out of struct line_header.
7713 (struct nextfield, struct nextfnfield, struct fnfieldlist, struct
7714 typedef_field_list): Move out of struct field_info.
7715 * gdbtypes.h (enum dynamic_prop_kind, union dynamic_prop_data):
7716 Move out of struct dynamic_prop.
7717 (union type_owner, union field_location, struct field, struct
7718 range_bounds, union type_specific): Move out of struct main_type.
7719 (struct fn_fieldlist, struct fn_field, struct typedef_field)
7720 (VOFFSET_STATIC): Move out of struct cplus_struct_type.
7721 (struct call_site_target, union call_site_parameter_u, struct
7722 call_site_parameter): Move out of struct call_site.
7723 * m32c-tdep.c (enum m32c_prologue_kind): Move out of struct
7725 (enum srcdest_kind): Move out of struct srcdest.
7726 * main.c (enum cmdarg_kind): Move out of struct cmdarg.
7727 * prologue-value.h (enum prologue_value_kind): Move out of struct
7729 * s390-linux-tdep.c (enum s390_abi_kind): Move out of struct
7731 * stabsread.c (struct nextfield, struct next_fnfieldlist): Move
7732 out of struct field_info.
7733 * symfile.h (struct other_sections): Move out of struct
7735 * symtab.c (struct symbol_cache_slot): Move out struct
7737 * target-descriptions.c (enum tdesc_type_kind): Move out of
7738 typedef struct tdesc_type.
7739 * tui/tui-data.h (enum tui_line_or_address_kind): Move out of
7740 struct tui_line_or_address.
7741 * value.c (enum internalvar_kind, union internalvar_data): Move
7742 out of struct internalvar.
7743 * xtensa-tdep.h (struct ctype_cache): Move out of struct
7746 2015-02-27 Tom Tromey <tromey@redhat.com>
7747 Pedro Alves <palves@redhat.com>
7749 Rename symbols whose names are reserved C++ keywords throughout.
7751 2015-02-27 Pedro Alves <palves@redhat.com>
7753 * Makefile.in (COMPILER): New, get it from autoconf.
7754 (COMPILE.pre, CC_LD): Use COMPILER.
7755 (CXX): Get from autoconf instead.
7756 (CXX_FOR_TARGET): Default to g++ instead of gcc.
7757 * acinclude.m4: Include build-with-cxx.m4.
7758 * build-with-cxx.m4: New file.
7759 * configure.ac: Call AC_PROG_CXX and GDB_AC_BUILD_WITH_CXX.
7760 Disable -Werror by default if building in C++ mode.
7761 (build_warnings): Add -Wno-sign-compare, -Wno-write-strings and
7762 -Wno-narrowing in C++ mode. Only enable -Wpointer-sign in C mode.
7763 Run supported-warning-flags tests with the C++ compiler.
7764 Save/restore CXXFLAGS too.
7765 * configure: Regenerate.
7767 2015-02-27 Pedro Alves <palves@redhat.com>
7769 * libiberty.m4: New file.
7770 * acinclude.m4: Include libiberty.m4.
7771 * configure.ac: Call libiberty_INIT.
7772 * config.in, configure: Regenerate.
7774 2015-02-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
7776 * s390-linux-tdep.c (s390_gcc_target_options): Not just handle
7777 31-bit targets, but 64-bit targets as well.
7778 (s390_gnu_triplet_regexp): New function.
7779 (s390_gdbarch_init): Set the gcc_target_options gdbarch method for
7780 64-bit targets as well. Set the gnu_triplet_regexp gdbarch
7783 2015-02-27 Jon TURNEY <jon.turney@dronecode.org.uk> (tiny patch)
7785 * windows-nat.c (CONTEXT_DEBUGGER): Remove.
7786 (CONTEXT_DEBUGGER_DR): Add CONTEXT_SEGMENTS. Incorporate flags
7787 from CONTEXT_DEBUGGER.
7789 2015-02-26 Doug Evans <dje@google.com>
7791 * gdbtypes.c (internal_type_vptr_fieldno): Add missing call to
7793 (set_type_vptr_fieldno): Ditto.
7794 (internal_type_vptr_basetype, set_type_vptr_basetype): Ditto.
7795 * gnu-v3-abi.c (gnuv3_dynamic_class): Ditto.
7797 2015-02-26 Pedro Alves <palves@redhat.com>
7799 * auto-load.h (file_is_auto_load_safe): Add ATTRIBUTE_PRINTF.
7800 * complaints.c (vcomplaint): Pass argument FMT directly to
7801 printf-like functions instead of complaint->fmt.
7802 * ctf.c (ctf_save_write_metadata): Add ATTRIBUTE_PRINTF.
7803 * darwin-nat.c (inferior_debug): Add ATTRIBUTE_PRINTF.
7804 * compile/compile-loc2c.c (pushf, unary, binary): Add
7806 (do_compile_dwarf_expr_to_c): Pass string literal as format string
7808 (BINARY): Pass string literal as format string to 'binary'.
7809 * compile/compile-object-load.c (link_callbacks_einfo): Add
7811 * guile/guile-internal.h (gdbscm_printf): Add ATTRIBUTE_PRINTF.
7813 2015-02-26 Pedro Alves <palves@redhat.com>
7815 * windows-termcap.c: Rename to ...
7816 * stub-termcap.c: ... this. Adjust header line.
7817 * Makefile.in (SFILES): Refer to stub-termcap.c instead of
7819 * configure: Regenerate.
7820 * configure.ac: Refer to stub-termcap.o instead of
7822 * gdb_curses.h: Mention stub-termcap.c instead of
7825 2015-02-26 Jan Kratochvil <jan.kratochvil@redhat.com>
7827 * compile/compile-c-symbols.c (convert_one_symbol, convert_symbol_bmsym)
7828 (gcc_symbol_address): Call gnu_ifunc_resolve_addr.
7830 2015-02-26 Antoine Tremblay <antoine.tremblay@ericsson.com>
7832 * gdb/infcmd.c (print_return_value): use type_to_string to print type.
7834 2015-02-26 Jan Kratochvil <jan.kratochvil@redhat.com>
7836 * elfread.c (elf_read_minimal_symbols): Use bfd_alloc for
7837 bfd_canonicalize_symtab.
7839 2015-02-25 John Baldwin <jhb@FreeBSD.org>
7841 * amd64fbsd-nat.c: Include sys/user.h.
7842 (_initialize_amd64fbsd_nat): Use the KERN_PROC_SIGTRAMP sysctl
7843 instead of KERN_PS_STRINGS to locate the signal trampoline.
7844 * i386fbsd-nat.c: Include sys/user.h.
7845 (_initialize_i386fbsd_nat): Use the KERN_PROC_SIGTRAMP sysctl
7846 instead of KERN_PS_STRINGS to locate the signal trampoline.
7847 * amd64fbsd-tdep.c (amd64fbsd_sigtramp_code): New.
7848 (amd64fbsd_sigtramp_p): New.
7849 (amd64fbsd_sigtramp_start_addr, amd64fbsd_sigtramp_end_addr): No
7850 longer set default values.
7851 (amd64fbsd_init_abi): Set "sigtramp_p" to "amd64fbsd_sigtramp_p".
7852 * i386fbsd-tdep.c (i386fbsd_sigtramp_start)
7853 (i386fbsd_sigtramp_middle, i386fbsd_sigtramp_end)
7854 (i386fbsd_freebsd4_sigtramp_start)
7855 (i386fbsd_freebsd4_sigtramp_middle)
7856 (i386fbsd_freebsd4_sigtramp_end, i386fbsd_osigtramp_start)
7857 (i386fbsd_osigtramp_middle, i386fbsd_osigtramp_end): New.
7858 (i386fbsd_sigtramp_p): New.
7859 (i386fbsd_sigtramp_start_addr, i386fbsd_sigtramp_end_addr): No
7860 longer set default values.
7861 (i386fbsd_init_abi): Set "sigtramp_p" to "i386fbsd_sigtramp_p".
7863 2015-02-25 John Baldwin <jhb@freebsd.org>
7865 * amd64fbsd-tdep.c (amd64fbsd_sigcontext_addr): Use
7866 get_frame_register instead of frame_unwind_register_unsigned.
7868 2015-02-26 Jan Kratochvil <jan.kratochvil@redhat.com>
7871 * compile/compile-c-support.c (c_compute_program): Change // comment.
7872 * compile/compile-object-load.c (setup_sections): Change // comment.
7874 2015-02-26 Joel Brobecker <brobecker@adacore.com>
7877 * iq2000-tdep.c (iq2000_frame_cache): Delete C++-style comment.
7879 2015-02-23 Pedro Alves <palves@redhat.com>
7881 * remote.c (skip_to_semicolon): New function.
7882 (remote_parse_stop_reply) <T stop reply>: Use it. Don't
7883 special case the stop reasons that look like hex numbers
7884 upfront. Instead handle real register numbers after matching
7885 all the known stop reasons.
7887 2015-02-21 Doug Evans <dje@google.com>
7889 PR c++/17976, symtab/17821
7890 * cp-namespace.c (cp_search_static_and_baseclasses): New parameter
7891 is_in_anonymous. All callers updated.
7892 (find_symbol_in_baseclass): Ditto.
7893 (cp_lookup_nested_symbol_1): Ditto. Don't search all static blocks
7894 for symbols in an anonymous namespace.
7895 * dwarf2read.c (namespace_name): Don't call dwarf2_name, fetch
7896 DW_AT_name directly.
7897 (dwarf2_name): Convert missing namespace name to
7898 CP_ANONYMOUS_NAMESPACE_STR.
7900 2015-02-20 Pedro Alves <palves@redhat.com>
7902 * linux-nat.c (linux_handle_extended_wait): Call
7903 thread_db_notice_clone whenever a new clone LWP is detected.
7904 (linux_stop_and_wait_all_lwps, linux_unstop_all_lwps): New
7906 * linux-nat.h (thread_db_attach_lwp): Delete declaration.
7907 (thread_db_notice_clone, linux_stop_and_wait_all_lwps)
7908 (linux_unstop_all_lwps): Declare.
7909 * linux-thread-db.c (struct thread_get_info_inout): Delete.
7910 (thread_get_info_callback): Delete.
7911 (thread_from_lwp): Use td_thr_get_info and record_thread.
7912 (thread_db_attach_lwp): Delete.
7913 (thread_db_notice_clone): New function.
7914 (try_thread_db_load_1): If /proc is mounted and shows the
7915 process'es task list, walk over all LWPs and call thread_from_lwp
7916 instead of relying on td_ta_thr_iter.
7917 (attach_thread): Don't call check_thread_signals here. Split the
7918 tail part of the function (which adds the thread to the core GDB
7920 (record_thread): ... this function. Call check_thread_signals
7922 (thread_db_wait): Don't call thread_db_find_new_threads_1. Always
7923 call thread_from_lwp.
7924 (thread_db_update_thread_list): Rename to ...
7925 (thread_db_update_thread_list_org): ... this.
7926 (thread_db_update_thread_list): New function.
7927 (thread_db_find_thread_from_tid): Delete.
7928 (thread_db_get_ada_task_ptid): Simplify.
7929 * nat/linux-procfs.c: Include <sys/stat.h>.
7930 (linux_proc_task_list_dir_exists): New function.
7931 * nat/linux-procfs.h (linux_proc_task_list_dir_exists): Declare.
7933 2015-02-20 Pedro Alves <palves@redhat.com>
7935 * linux-nat.c (lin_lwp_attach_lwp): No longer special case the
7936 main LWP. Handle the case of waitpid returning 0 if we're already
7937 attached to the LWP. Don't set the LWP's last_resume_kind to
7938 resume_stop if we already knew about the LWP.
7939 (linux_nat_filter_event): Add debug logs.
7941 2015-02-20 Pedro Alves <palves@redhat.com>
7943 * target.h (forward_target_decr_pc_after_break): Delete
7946 2015-02-20 Pedro Alves <palves@redhat.com>
7949 * linux-thread-db.c (thread_get_info_callback): Return early if
7950 the thread's lwp id is -1.
7952 2015-02-20 Joel Brobecker <brobecker@adacore.com>
7956 2015-02-19 Steve Ellcey <sellcey@imgtec.com>
7958 * dtrace-probe.c (dtrace_process_dof_probe): Initialize arg.expr.
7959 (dtrace_get_probes) Change type of variable 'dof'.
7961 2015-02-19 Antoine Tremblay <antoine.tremblay@ericsson.com>
7963 PR breakpoints/16812
7964 * linux-nat.c (linux_nat_filter_event): Report SIGTRAP,SIGILL,SIGSEGV.
7965 * nat/linux-ptrace.c (linux_wstatus_maybe_breakpoint): Add.
7966 * nat/linux-ptrace.h: Add linux_wstatus_maybe_breakpoint.
7968 2015-02-19 David Taylor <dtaylor@emc.com>
7970 * common/ax.def (setv): Fix consumed entry in setv DEFOP.
7972 2015-02-18 Patrick Palka <patrick@parcs.ath.cx>
7974 * tui/tui-io.c (tui_handle_resize_during_io): Remove this
7976 (tui_putc): Don't call tui_handle_resize_during_io.
7977 (tui_getc): Likewise.
7978 (tui_mld_getc): Likewise.
7979 * tui/tui-win.c: Include event-loop.h and tui/tui-io.h.
7980 (tui_sigwinch_token): New static variable.
7981 (tui_initialize_win): Adjust documentation. Set
7983 (tui_async_resize_screen): New asynchronous callback.
7984 (tui_sigwinch_handler): Adjust documentation. Asynchronously
7985 invoke tui_async_resize_screen.
7987 2015-02-18 Jose E. Marchesi <jose.marchesi@oracle.com>
7989 * configure: Regenerated.
7990 * configure.ac: Use GDB_AC_TRANSFORM.
7991 * Makefile.in (aclocal_m4_deps): Added transform.m4.
7992 * acinclude.m4: sinclude transform.m4.
7993 * transform.m4: New file.
7994 (GDB_AC_TRANSFORM): New macro.
7996 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
7998 * NEWS: Announce the support for DTrace SDT probes.
8000 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
8002 * amd64-linux-tdep.c: Include "parser-defs.h" and "user-regs.h".
8003 (amd64_dtrace_parse_probe_argument): New function.
8004 (amd64_dtrace_probe_is_enabled): Likewise.
8005 (amd64_dtrace_enable_probe): Likewise.
8006 (amd64_dtrace_disable_probe): Likewise.
8007 (amd64_linux_init_abi): Register the
8008 `gdbarch_dtrace_probe_argument', `gdbarch_dtrace_enable_probe',
8009 `gdbarch_dtrace_disable_probe' and
8010 `gdbarch_dtrace_probe_is_enabled' hooks.
8011 (amd64_dtrace_disabled_probe_sequence_1): New constant.
8012 (amd64_dtrace_disabled_probe_sequence_2): Likewise.
8013 (amd64_dtrace_enable_probe_sequence): Likewise.
8014 (amd64_dtrace_disable_probe_sequence): Likewise.
8016 2015-01-17 Jose E. Marchesi <jose.marchesi@oracle.com>
8018 * breakpoint.c (BREAK_ARGS_HELP): Help string updated to mention
8019 the -probe-dtrace new vpossible value for PROBE_MODIFIER.
8020 * configure.ac (CONFIG_OBS): dtrace-probe.o added if BFD can
8022 * Makefile.in (SFILES): dtrace-probe.c added.
8023 * configure: Regenerate.
8024 * dtrace-probe.c: New file.
8025 (SHT_SUNW_dof): New constant.
8026 (dtrace_probe_type): New enum.
8027 (dtrace_probe_arg): New struct.
8028 (dtrace_probe_arg_s): New typedef.
8029 (struct dtrace_probe_enabler): New struct.
8030 (dtrace_probe_enabler_s): New typedef.
8031 (dtrace_probe): New struct.
8032 (dtrace_probe_is_linespec): New function.
8033 (dtrace_dof_sect_type): New enum.
8034 (dtrace_dof_dofh_ident): Likewise.
8035 (dtrace_dof_encoding): Likewise.
8036 (DTRACE_DOF_ENCODE_LSB): Likewise.
8037 (DTRACE_DOF_ENCODE_MSB): Likewise.
8038 (dtrace_dof_hdr): New struct.
8039 (dtrace_dof_sect): Likewise.
8040 (dtrace_dof_provider): Likewise.
8041 (dtrace_dof_probe): Likewise.
8042 (DOF_UINT): New macro.
8043 (DTRACE_DOF_PTR): Likewise.
8044 (DTRACE_DOF_SECT): Likewise.
8045 (dtrace_process_dof_probe): New function.
8046 (dtrace_process_dof): Likewise.
8047 (dtrace_build_arg_exprs): Likewise.
8048 (dtrace_get_arg): Likewise.
8049 (dtrace_get_probes): Likewise.
8050 (dtrace_get_probe_argument_count): Likewise.
8051 (dtrace_can_evaluate_probe_arguments): Likewise.
8052 (dtrace_evaluate_probe_argument): Likewise.
8053 (dtrace_compile_to_ax): Likewise.
8054 (dtrace_probe_destroy): Likewise.
8055 (dtrace_gen_info_probes_table_header): Likewise.
8056 (dtrace_gen_info_probes_table_values): Likewise.
8057 (dtrace_probe_is_enabled): Likewise.
8058 (dtrace_probe_ops): New variable.
8059 (info_probes_dtrace_command): New function.
8060 (_initialize_dtrace_probe): Likewise.
8061 (dtrace_type_name): Likewise.
8063 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
8065 * gdbarch.sh (dtrace_parse_probe_argument): New.
8066 (dtrace_probe_is_enabled): Likewise.
8067 (dtrace_enable_probe): Likewise.
8068 (dtrace_disable_probe): Likewise.
8069 * gdbarch.c: Regenerate.
8070 * gdbarch.h: Regenerate.
8072 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
8074 * stap-probe.c (stap_probe_ops): Add NULLs in the static
8075 stap_probe_ops for `enable_probe' and `disable_probe'.
8076 * probe.c (enable_probes_command): New function.
8077 (disable_probes_command): Likewise.
8078 (_initialize_probe): Define the cli commands `enable probe' and
8080 (parse_probe_linespec): New function.
8081 (info_probes_for_ops): Use parse_probe_linespec.
8082 * probe.h (probe_ops): New hooks `enable_probe' and
8085 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
8087 * probe.c (compute_probe_arg): Moved from stap-probe.c
8088 (compile_probe_arg): Likewise.
8089 (probe_funcs): Likewise.
8090 * stap-probe.c (compute_probe_arg): Moved to probe.c.
8091 (compile_probe_arg): Likewise.
8092 (probe_funcs): Likewise.
8094 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
8096 * probe.c (print_ui_out_not_applicables): New function.
8097 (exists_probe_with_pops): Likewise.
8098 (info_probes_for_ops): Do not include column headers for probe
8099 types for which no probe has been actually found on any object.
8100 Also invoke `print_ui_out_not_applicables' in order to match the
8101 column rows with the header when probes of several types are
8103 Print the "Type" column.
8104 * probe.h (probe_ops): Added a new probe operation `type_name'.
8105 * stap-probe.c (stap_probe_ops): Add `stap_type_name'.
8106 (stap_type_name): New function.
8108 2015-02-17 Patrick Palka <patrick@parcs.ath.cx>
8110 * tui/tui-io.c (tui_getc): Don't call key_is_command_char.
8111 (key_is_command_char): Delete.
8113 2015-02-17 Pedro Alves <palves@redhat.com>
8115 * tui/tui.c (tui_enable): Resize windows before anything
8116 might show a window.
8118 2015-02-17 Max Ostapenko <m.ostapenko@partner.samsung.com>
8121 * aarch64-linux-nat.c: Don't include features/aarch64.c anymore.
8122 (aarch64_linux_read_description): Remove initialize_tdesc_aarch64
8124 * aarch64-tdep.h (tdesc_aarch64): Declare.
8126 2015-02-12 Mark Wielaard <mjw@redhat.com>
8128 * contrib/ari/gdb_ari.sh: Remove checks for "true" and "false".
8130 2015-02-13 Doug Evans <dje@google.com>
8132 * cp-namespace.c (cp_basic_lookup_symbol): Rename parameter
8133 anonymous_namespace to is_in_anonymous for consistency with the rest
8135 (cp_lookup_bare_symbol): Fix typo in comment.
8136 (cp_search_static_and_baseclasses): Ditto.
8137 (search_symbol_list): Use vertical space in comment better.
8138 (reset_directive_searched): Ditto. Fix typo.
8139 (cp_lookup_nested_symbol_1): Clarify contents of NESTED_NAME parameter.
8141 2015-02-13 Yao Qi <yao.qi@arm.com>
8143 * MAINTAINERS: Update my email address.
8145 2015-02-12 Doug Evans <dje@google.com>
8147 * symtab.c (completion_list_add_name): Fix memory leak.
8149 2015-02-12 Doug Evans <dje@google.com>
8151 * completer.c (complete_line): Remove incorrect comment.
8153 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
8155 * python/py-framefilter.c (py_print_single_arg, enumerate_locals)
8156 (py_print_frame): Use RETURN_MASK_ERROR.
8158 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
8160 * python/py-framefilter.c (py_print_frame): Mention RETURN_QUIT in
8161 function comment. Wrap all function that can throw in cleanups.
8162 (gdbpy_apply_frame_filter): Wrap all function that can throw in
8165 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
8167 * python/py-framefilter.c (py_print_frame): Substitute goto error.
8168 Remove the error label.
8170 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
8172 * python/py-framefilter.c (py_print_frame): Put conditional code paths
8173 with goto first, indent the former else codepath left. Put variable
8174 'elided' to a new inner block.
8176 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
8178 * python/py-framefilter.c (py_print_frame): Whitespacing fixes.
8180 2015-02-11 Pedro Alves <palves@redhat.com>
8182 * xcoffread.c (within_function): Delete.
8184 2015-02-11 Tom Tromey <tromey@redhat.com>
8185 Pedro Alves <palves@redhat.com>
8187 * breakpoint.c (base_breakpoint_ops): Delete.
8188 * dwarf2loc.c (dwarf_expr_ctx_funcs): Make extern.
8189 * elfread.c (elf_sym_fns_gdb_index, elf_sym_fns_lazy_psyms): Make extern.
8190 * guile/guile.c (guile_extension_script_ops, guile_extension_ops): Make extern.
8191 * ppcnbsd-tdep.c (ppcnbsd2_sigtramp): Make extern.
8192 * python/py-arch.c (arch_object_type): Make extern.
8193 * python/py-block.c (block_syms_iterator_object_type): Make extern.
8194 * python/py-bpevent.c (breakpoint_event_object_type): Make extern.
8195 * python/py-cmd.c (cmdpy_object_type): Make extern.
8196 * python/py-continueevent.c (continue_event_object_type)
8197 * python/py-event.h (GDBPY_NEW_EVENT_TYPE): Remove 'qual'
8198 parameter. Update all callers.
8199 * python/py-evtregistry.c (eventregistry_object_type): Make extern.
8200 * python/py-exitedevent.c (exited_event_object_type): Make extern.
8201 * python/py-finishbreakpoint.c (finish_breakpoint_object_type): Make extern.
8202 * python/py-function.c (fnpy_object_type): Make extern.
8203 * python/py-inferior.c (inferior_object_type, membuf_object_type): Make extern.
8204 * python/py-infevents.c (call_pre_event_object_type)
8205 (inferior_call_post_event_object_type).
8206 (memory_changed_event_object_type): Make extern.
8207 * python/py-infthread.c (thread_object_type): Make extern.
8208 * python/py-lazy-string.c (lazy_string_object_type): Make extern.
8209 * python/py-linetable.c (linetable_entry_object_type)
8210 (linetable_object_type, ltpy_iterator_object_type): Make extern.
8211 * python/py-newobjfileevent.c (new_objfile_event_object_type)
8212 (clear_objfiles_event_object_type): Make extern.
8213 * python/py-objfile.c (objfile_object_type): Make extern.
8214 * python/py-param.c (parmpy_object_type): Make extern.
8215 * python/py-progspace.c (pspace_object_type): Make extern.
8216 * python/py-signalevent.c (signal_event_object_type): Make extern.
8217 * python/py-symtab.c (symtab_object_type, sal_object_type): Make extern.
8218 * python/py-type.c (type_object_type, field_object_type)
8219 (type_iterator_object_type): Make extern.
8220 * python/python.c (python_extension_script_ops)
8221 (python_extension_ops): Make extern.
8222 * stap-probe.c (stap_probe_ops): Make extern.
8224 2015-02-11 Pedro Alves <pedro@codesourcery.com>
8226 * infrun.c (adjust_pc_after_break): Don't adjust the PC just
8227 because the event thread is not the current thread.
8229 2015-02-11 Doug Evans <xdje42@gmail.com>
8231 * gdbtypes.c (internal_type_self_type): If TYPE_SPECIFIC_FIELD hasn't
8232 been initialized yet, return NULL.
8234 2015-02-11 Doug Evans <dje@google.com>
8236 * symfile.h (new_symfile_objfile): Delete.
8237 * symfile.c (finish_new_objfile): Renamed from new_symfile_objfile.
8238 All callers updated.
8240 2015-02-11 Patrick Palka <patrick@parcs.ath.cx>
8242 * tui/tui-io.c (tui_handle_resize_during_io): Call
8243 tui_update_gdb_sizes() after resizing the screen.
8244 * tui/tui.c (tui_enable): Resize the terminal before
8245 calling tui_update_gdb_sizes().
8247 2015-02-11 Patrick Palka <patrick@parcs.ath.cx>
8249 * tui/tui-io.c (tui_getc): Move cursor to the end of the command
8250 line before printing a newline.
8252 2015-02-11 Mark Wielaard <mjw@redhat.com>
8254 * utils.c (producer_is_gcc): Return true or false.
8256 2015-02-10 Mark Wielaard <mjw@redhat.com>
8258 * utils.h (producer_is_gcc): Change return type to bool. Add major
8260 * utils.c (producer_is_gcc): Likewise.
8261 (producer_is_gcc_ge_4): Adjust producer_is_gcc call.
8262 * dwarf2read.c (check_producer): Likewise.
8264 2015-02-10 Pedro Alves <palves@redhat.com>
8266 * infrun.c (displaced_step_fixup): Switch to the event thread
8267 before calling gdbarch_displaced_step_fixup.
8269 2015-02-10 Antoine Tremblay <antoine.tremblay@ericsson.com>
8271 * MAINTAINERS (Write After Approval): Add Antoine Tremblay.
8273 2015-02-10 Simon Marchi <simon.marchi@ericsson.com>
8275 * ada-varobj.c (ada_name_of_child): Constify parent.
8276 (ada_path_expr_of_child): Same.
8277 (ada_value_of_child): Same.
8278 (ada_type_of_child): Same.
8279 * c-varobj.c (c_is_path_expr_parent): Same.
8280 (c_describe_child): Same.
8281 (c_name_of_child): Same.
8282 (c_value_of_child): Same.
8283 (c_type_of_child): Same.
8284 (cplus_number_of_children): Same.
8285 (cplus_describe_child): Constify var.
8286 (cplus_name_of_child): Constify parent.
8287 (cplus_value_of_child): Same.
8288 (cplus_type_of_child): Same.
8289 * jv-varobj.c (java_name_of_child): Same.
8290 (java_value_of_child): Same.
8291 (java_type_of_child): Same.
8292 * varobj.c (value_of_child): Same.
8293 (varobj_default_is_path_expr_parent): Constify var, parent and return
8295 (varobj_get_path_expr): Constify var, modify path_expr through
8297 (install_new_value): Constify parent.
8298 (value_of_child): Constify parent.
8299 * varobj.h (struct varobj): Constify parent.
8300 (struct lang_varobj_ops): Constify name_of_child, value_of_child and
8302 (varobj_get_path_expr): Constify var.
8303 (varobj_get_path_expr_parent): Constify var and return value.
8305 2015-02-10 Luis Machado <lgustavo@codesourcery.com>
8307 * arm-tdep.c (arm_prologue_unwind_stop_reason): New function.
8308 (arm_prologue_this_id): Move PC and SP limit checks to
8309 arm_prologue_unwind_stop_reason.
8310 (arm_prologue_unwind) <stop_reason> : Set to
8311 arm_prologue_unwind_stop_reason.
8313 2015-02-09 Mark Wielaard <mjw@redhat.com>
8315 * dwarf2read.c (set_cu_language): Recognize DW_LANG_Fortran03 and
8316 DW_LANG_Fortran08 as language_fortran.
8318 2015-02-09 Sergio Durigan Junior <sergiodj@redhat.com>
8321 * gdb/remote.c (remote_parse_stop_reply): Fix wrong comparison
8322 of pointer against char.
8324 2015-02-09 Mark Wielaard <mjw@redhat.com>
8326 * c-typeprint.c (cp_type_print_method_args): Handle '_Atomic'.
8327 (c_type_print_modifier): Likewise.
8328 * dwarf2read.c (read_tag_atomic_type): New function.
8329 (read_type_die_1): Handle DW_TAG_atomic_type.
8330 * gdbtypes.c (make_atomic_type): New function.
8331 (recursive_dump_type): Handle TYPE_ATOMIC.
8332 * gdbtypes.h (enum type_flag_values): Renumber.
8333 (enum type_instance_flag_value): Add TYPE_INSTANCE_FLAG_ATOMIC.
8334 (TYPE_ATOMIC): New macro.
8335 (make_atomic_type): Declare.
8337 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
8339 * btrace.c (ftrace_find_call): Skip gaps.
8340 (ftrace_new_function): Initialize level.
8341 (ftrace_new_call, ftrace_new_tailcall, ftrace_new_return)
8342 (ftrace_new_switch): Update
8344 (ftrace_new_gap): New.
8345 (ftrace_update_function): Create new function after gap.
8346 (btrace_compute_ftrace_bts): Create gap on error.
8347 (btrace_stitch_bts): Update parameters. Clear trace if it
8349 (btrace_stitch_trace): Update parameters. Update callers.
8350 (btrace_clear): Reset the number of gaps.
8351 (btrace_insn_get): Return NULL if the iterator points to a gap.
8352 (btrace_insn_number): Return zero if the iterator points to a gap.
8353 (btrace_insn_end): Allow gaps at the end.
8354 (btrace_insn_next, btrace_insn_prev, btrace_insn_cmp): Handle gaps.
8355 (btrace_find_insn_by_number): Assert that the found iterator does
8357 (btrace_call_next, btrace_call_prev): Assert that the last function
8359 * btrace.h (btrace_bts_error): New.
8360 (btrace_function): Update comment.
8361 (btrace_function) <insn, insn_offset, number>: Update comment.
8362 (btrace_function) <errcode>: New.
8363 (btrace_thread_info) <ngaps>: New.
8364 (btrace_thread_info) <replay>: Update comment.
8365 (btrace_insn_get): Update comment.
8366 * record-btrace.c (btrace_ui_out_decode_error): New.
8367 (record_btrace_info): Print number of gaps.
8368 (btrace_insn_history, btrace_call_history): Call
8369 btrace_ui_out_decode_error for gaps.
8370 (record_btrace_step_thread, record_btrace_start_replaying): Skip gaps.
8372 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
8374 * common/btrace-common.h (btrace_cpu_vendor, btrace_cpu): New.
8375 * nat/linux-btrace.c: (btrace_this_cpu): New.
8376 (cpu_supports_bts): Call btrace_this_cpu.
8377 (intel_supports_bts): Add cpu parameter.
8379 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
8381 * btrace.h (btrace_insn_class): New.
8382 (btrace_insn) <size, iclass>: New.
8383 * btrace.c (ftrace_find_call): Update parameters. Update users.
8384 Use instruction classification.
8385 (ftrace_new_return): Update parameters. Update users.
8386 (ftrace_update_function): Update parameters. Update users. Use
8387 instruction classification.
8388 (ftrace_update_insns): Update parameters. Update users.
8389 (ftrace_classify_insn): New.
8390 (btrace_compute_ftrace_bts): Fill in new btrace_insn fields. Add
8391 TRY_CATCH around call to gdb_insn_length.
8393 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
8395 * btrace.c (btrace_compute_ftrace_bts, btrace_compute_ftrace):
8396 Update parameters. Update users.
8398 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
8400 * btrace.c (parse_xml_btrace_conf_bts): Add size.
8401 (btrace_conf_bts_attributes): New.
8402 (btrace_conf_children): Add attributes.
8403 * common/btrace-common.h (btrace_config_bts): New.
8404 (btrace_config)<bts>: New.
8405 (btrace_config): Update comment.
8406 * nat/linux-btrace.c (linux_enable_btrace, linux_enable_bts):
8408 * features/btrace-conf.dtd: Increment version. Add size
8409 attribute to bts element.
8410 * record-btrace.c (set_record_btrace_bts_cmdlist,
8411 show_record_btrace_bts_cmdlist): New.
8412 (record_btrace_adjust_size, record_btrace_print_bts_conf,
8413 record_btrace_print_conf, cmd_set_record_btrace_bts,
8414 cmd_show_record_btrace_bts): New.
8415 (record_btrace_info): Call record_btrace_print_conf.
8416 (_initialize_record_btrace): Add commands.
8417 * remote.c: Add PACKET_Qbtrace_conf_bts_size enum.
8418 (remote_protocol_features): Add Qbtrace-conf:bts:size packet.
8419 (btrace_sync_conf): Synchronize bts size.
8420 (_initialize_remote): Add Qbtrace-conf:bts:size packet.
8421 * NEWS: Announce new commands and new packets.
8423 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
8425 * Makefile.in (XMLFILES): Add btrace-conf.dtd.
8426 * x86-linux-nat.c (x86_linux_enable_btrace): Update parameters.
8427 (x86_linux_btrace_conf): New.
8428 (x86_linux_create_target): Initialize to_btrace_conf.
8429 * nat/linux-btrace.c (linux_enable_btrace): Update parameters.
8430 Check format. Split into this and ...
8431 (linux_enable_bts): ... this.
8432 (linux_btrace_conf): New.
8433 (perf_event_skip_record): Renamed into ...
8434 (perf_event_skip_bts_record): ... this. Updated users.
8435 (linux_disable_btrace): Split into this and ...
8436 (linux_disable_bts): ... this.
8437 (linux_read_btrace): Check format.
8438 * nat/linux-btrace.h (linux_enable_btrace): Update parameters.
8439 (linux_btrace_conf): New.
8440 (btrace_target_info)<ptid>: Moved.
8441 (btrace_target_info)<conf>: New.
8442 (btrace_target_info): Split into this and ...
8443 (btrace_tinfo_bts): ... this. Updated users.
8444 * btrace.c (btrace_enable): Update parameters.
8445 (btrace_conf, parse_xml_btrace_conf_bts, parse_xml_btrace_conf)
8446 (btrace_conf_children, btrace_conf_attributes)
8447 (btrace_conf_elements): New.
8448 * btrace.h (btrace_enable): Update parameters.
8449 (btrace_conf, parse_xml_btrace_conf): New.
8450 * common/btrace-common.h (btrace_config): New.
8451 * feature/btrace-conf.dtd: New.
8452 * record-btrace.c (record_btrace_conf): New.
8453 (record_btrace_cmdlist): New.
8454 (record_btrace_enable_warn, record_btrace_open): Pass
8455 &record_btrace_conf.
8456 (record_btrace_info): Print recording format.
8457 (cmd_record_btrace_bts_start): New.
8458 (cmd_record_btrace_start): Call cmd_record_btrace_bts_start.
8459 (_initialize_record_btrace): Add "record btrace bts" subcommand.
8460 Add "record bts" alias command.
8461 * remote.c (remote_state)<btrace_config>: New.
8462 (remote_btrace_reset, PACKET_qXfer_btrace_conf): New.
8463 (remote_protocol_features): Add qXfer:btrace-conf:read.
8464 (remote_open_1): Call remote_btrace_reset.
8465 (remote_xfer_partial): Handle TARGET_OBJECT_BTRACE_CONF.
8466 (btrace_target_info)<conf>: New.
8467 (btrace_sync_conf, btrace_read_config): New.
8468 (remote_enable_btrace): Update parameters. Call btrace_sync_conf and
8470 (remote_btrace_conf): New.
8471 (init_remote_ops): Initialize to_btrace_conf.
8472 (_initialize_remote): Add qXfer:btrace-conf packet.
8473 * target.c (target_enable_btrace): Update parameters.
8474 (target_btrace_conf): New.
8475 * target.h (target_enable_btrace): Update parameters.
8476 (target_btrace_conf): New.
8477 (target_object)<TARGET_OBJECT_BTRACE_CONF>: New.
8478 (target_ops)<to_enable_btrace>: Update parameters and comment.
8479 (target_ops)<to_btrace_conf>: New.
8480 * target-delegates: Regenerate.
8481 * target-debug.h (target_debug_print_const_struct_btrace_config_p)
8482 (target_debug_print_const_struct_btrace_target_info_p): New.
8483 * NEWS: Announce new command and new packet.
8485 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
8487 * nat/linux-btrace.h (perf_event_buffer): New.
8488 (btrace_target_info) <buffer, size, data_head>: Replace with ...
8490 * nat/linux-btrace.c (perf_event_header, perf_event_mmap_size)
8491 (perf_event_buffer_size, perf_event_buffer_begin)
8492 (perf_event_buffer_end, linux_btrace_has_changed): Removed.
8494 (perf_event_new_data): New.
8496 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
8498 * btrace.c (btrace_enable): Pass BTRACE_FORMAT_BTS.
8499 * record-btrace.c (record_btrace_open): Remove call to
8500 target_supports_btrace.
8501 * remote.c (remote_supports_btrace): Update parameters.
8502 * target.c (target_supports_btrace): Update parameters.
8503 * target.h (to_supports_btrace, target_supports_btrace): Update
8505 * target-delegates.c: Regenerate.
8506 * target-debug.h (target_debug_print_enum_btrace_format): New.
8507 * nat/linux-btrace.c
8508 (kernel_supports_btrace): Rename into ...
8509 (kernel_supports_bts): ... this. Update users. Update warning text.
8510 (intel_supports_btrace): Rename into ...
8511 (intel_supports_bts): ... this. Update users.
8512 (cpu_supports_btrace): Rename into ...
8513 (cpu_supports_bts): ... this. Update users.
8514 (linux_supports_btrace): Update parameters. Split into this and ...
8515 (linux_supports_bts): ... this.
8516 * nat/linux-btrace.h (linux_supports_btrace): Update parameters.
8518 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
8520 * Makefile.in (SFILES): Add common/btrace-common.c.
8521 (COMMON_OBS): Add common/btrace-common.o.
8522 (btrace-common.o): Add build rules.
8523 * btrace.c (parse_xml_btrace): Update parameters.
8524 (parse_xml_btrace_block): Set format field.
8525 (btrace_add_pc, btrace_fetch): Use struct btrace_data.
8526 (do_btrace_data_cleanup, make_cleanup_btrace_data): New.
8527 (btrace_compute_ftrace): Split into this and...
8528 (btrace_compute_ftrace_bts): ...this.
8529 (btrace_stitch_trace): Split into this and...
8530 (btrace_stitch_bts): ...this.
8531 * btrace.h (parse_xml_btrace): Update parameters.
8532 (make_cleanup_btrace_data): New.
8533 * common/btrace-common.c: New.
8534 * common/btrace-common.h: Include common-defs.h.
8535 (btrace_block_s): Update comment.
8536 (btrace_format): New.
8537 (btrace_format_string): New.
8538 (btrace_data_bts): New.
8540 (btrace_data_init, btrace_data_fini, btrace_data_empty): New.
8541 * remote.c (remote_read_btrace): Update parameters.
8542 * target.c (target_read_btrace): Update parameters.
8543 * target.h (target_read_btrace): Update parameters.
8544 (target_ops)<to_read_btrace>: Update parameters.
8545 * x86-linux-nat.c (x86_linux_read_btrace): Update parameters.
8546 * target-delegates.c: Regenerate.
8547 * target-debug (target_debug_print_struct_btrace_data_p): New.
8548 * nat/linux-btrace.c (linux_read_btrace): Split into this and...
8549 (linux_read_bts): ...this.
8550 * nat/linux-btrace.h (linux_read_btrace): Update parameters.
8552 2015-02-06 Doug Evans <dje@google.com>
8554 * remote-m32r-sdi.c: Include symfile.h.
8556 2015-02-06 Doug Evans <dje@google.com>
8558 * symtab.h (clear_symtab_users, deduce_language_from_filename): Move
8559 * symfile.h (clear_symtab_users, deduce_language_from_filename): ...
8562 2015-02-06 Pedro Alves <palves@redhat.com>
8564 * linux-thread-db.c (find_new_threads_callback): Add debug output.
8566 2015-02-06 Simon Marchi <simon.marchi@ericsson.com>
8569 * breakpoint.c (map_breakpoint_numbers): Check for empty args string.
8570 (enable_count_command): Check args for NULL value.
8572 2015-02-05 Doug Evans <xdje42@gmail.com>
8574 * guile/scm-frame.c: Fix spelling errors in a comment.
8576 2015-02-04 Jan Kratochvil <jan.kratochvil@redhat.com>
8578 * python/python-internal.h (Py_hash_t): Define it for Python <3.2.
8579 * python/py-value.c (valpy_fetch_lazy): Use it. Remove cast to the
8582 2015-02-04 Pedro Alves <palves@redhat.com>
8584 * linux-nat.c (handle_extended_wait): Don't resume LWPs here.
8585 (wait_lwp): Don't call wait_lwp if linux_handle_extended_wait
8587 (resume_stopped_resumed_lwps): Don't check whether the thread is
8588 marked as executing.
8589 (linux_nat_wait_1): Use resume_stopped_resumed_lwps.
8591 2015-02-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
8593 * regset.h (struct regset): Add flags field.
8594 (REGSET_VARIABLE_SIZE): New value for a regset's flags field.
8595 * corelow.c (get_core_register_section): Add warning if the size
8596 exceeds the requested size and the regset does not have the
8597 REGSET_VARIABLE_SIZE flag set.
8598 * alphanbsd-tdep.c (alphanbsd_gregset): Add REGSET_VARIABLE_SIZE
8600 * armbsd-tdep.c (armbsd_gregset): Likewise.
8601 * hppa-hpux-tdep.c (hppa_hpux_regset): Likewise.
8602 * hppaobsd-tdep.c (hppaobsd_gregset): Likewise.
8603 * m68kbsd-tdep.c (m68kbsd_gregset): Likewise.
8604 * mipsnbsd-tdep.c (mipsnbsd_gregset): Likewise.
8606 2015-02-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
8608 * amd64-linux-tdep.c (amd64_linux_iterate_over_regset_sections):
8609 For ".reg-xstate", explicitly specify the requested section size
8610 via X86_XSTATE_SIZE instead of just 0 on input and
8611 X86_XSTATE_MAX_SIZE on output.
8612 * i386-linux-tdep.c (i386_linux_iterate_over_regset_sections):
8615 2015-02-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
8618 * gdbarch.sh (iterate_over_regset_sections_cb): Document this
8619 function type, particularly its SIZE parameter.
8620 * gdbarch.h: Regenerate.
8621 * amd64-tdep.c (amd64_supply_fpregset): In gdb_assert, compare
8622 actual against required size using ">=" instead of "==".
8623 (amd64_collect_fpregset): Likewise.
8624 * i386-tdep.c (i386_supply_gregset): Likewise.
8625 (i386_collect_gregset): Likewise.
8626 (i386_supply_fpregset): Likewise.
8627 (i386_collect_fpregset): Likewise.
8628 * mips-linux-tdep.c (mips_supply_gregset_wrapper): Likewise.
8629 (mips_fill_gregset_wrapper): Likewise.
8630 (mips_supply_fpregset_wrapper): Likewise.
8631 (mips_fill_fpregset_wrapper): Likewise.
8632 (mips64_supply_gregset_wrapper): Likewise.
8633 (mips64_fill_gregset_wrapper): Likewise.
8634 (mips64_supply_fpregset_wrapper): Likewise.
8635 (mips64_fill_fpregset_wrapper): Likewise.
8636 * mn10300-linux-tdep.c (am33_supply_gregset_method): Likewise.
8637 (am33_supply_fpregset_method): Likewise.
8638 (am33_collect_gregset_method): Likewise.
8639 (am33_collect_fpregset_method): Likewise.
8641 2015-02-04 Doug Evans <dje@google.com>
8642 Pedro Alves <palves@redhat.com>
8643 Eli Zaretskii <eliz@gnu.org>
8646 * tui/tui-command.c (tui_refresh_cmd_win): New function.
8647 * tui/tui-command.c (tui_refresh_cmd_win): Declare.
8648 * tui/tui-file.c: #include tui/tui-command.h.
8649 (tui_file_fputs): Refresh command window if stream is not gdb_stdout.
8650 (tui_file_flush): Refresh command window if stream is gdb_stdout.
8651 * tui/tui-io.c (tui_puts): Remove calls to wrefresh, fflush.
8653 2015-02-04 Pedro Alves <palves@redhat.com>
8656 * event-loop.c (gdb_do_one_event): Add default switch case.
8658 2015-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
8660 Filter out inferior gcc option -fpreprocessed.
8661 * compile/compile.c (filter_args): New function.
8664 2015-02-03 Pedro Alves <palves@redhat.com>
8666 * event-loop.c: Don't declare nor define a queue type for
8668 (event_queue): Delete.
8669 (create_event, create_file_event, gdb_event_xfree)
8670 (initialize_event_loop, process_event): Delete.
8671 (gdb_do_one_event): Return as soon as one event is handled.
8672 (handle_file_event): Change prototype. Used the passed in
8673 file_handler pointer and ready_mask instead of looping over all
8675 (gdb_wait_for_event): Update the poll/select timeouts before
8676 blocking. Run event handlers directly instead of queueing events.
8677 Return as soon as one event is handled.
8678 (struct async_event_handler_data): Delete.
8679 (invoke_async_event_handler): Delete.
8680 (check_async_event_handlers): Change return type to int. Run
8681 event handlers directly instead of queueing events. Return as
8682 soon as one event is handled.
8683 (handle_timer_event): Delete.
8684 (update_wait_timeout): New function, factored out from
8686 (poll_timers): Reimplement.
8687 * event-loop.h (initialize_event_loop): Delete declaration.
8688 * top.c (gdb_init): Don't call initialize_event_loop.
8690 2015-02-03 Pedro Alves <palves@redhat.com>
8692 * event-loop.c (clear_async_event_handler): New function.
8693 * event-loop.h (clear_async_event_handler): New declaration.
8694 * record-btrace.c (record_btrace_async): New function.
8695 (init_record_btrace_ops): Install record_btrace_async.
8696 * record-full.c (record_full_async): New function.
8697 (record_full_resume): Don't mark the async event source here.
8698 (init_record_full_ops): Install record_full_async.
8699 (record_full_core_resume): Don't mark the async event source here.
8700 (init_record_full_core_ops): Install record_full_async.
8701 * remote.c (remote_async): Mark and clear the async stop reply
8702 queue event-loop token as appropriate.
8704 2015-02-03 Pedro Alves <palves@redhat.com>
8706 * linux-nat.c (linux_child_follow_fork, linux_nat_wait_1): Use
8707 target_is_async_p instead of target_can_async.
8708 (linux_nat_wait): Use target_is_async_p instead of
8709 target_can_async. Don't enable async here.
8710 * remote.c (interrupt_query, remote_wait, putpkt_binary): Use
8711 target_is_async_p instead of target_can_async.
8713 2015-02-02 Simon Marchi <simon.marchi@ericsson.com>
8715 * varobj.h (lang_varobj_ops): Mention which return values need
8718 2015-02-02 Joel Brobecker <brobecker@adacore.com>
8720 * dwarf2loc.c (dwarf2_evaluate_property): Add i18n marker.
8722 2015-02-02 Joel Brobecker <brobecker@adacore.com>
8725 * ada-lang.c (ada_lookup_symbol_list_worker): Do not re-cache
8726 results found in the cache.
8728 2015-02-02 Joel Brobecker <brobecker@adacore.com>
8731 * ada-lang.c (ada_get_symbol_cache): Set pspace_data->sym_cache
8732 when allocating a new one.
8734 2015-02-01 Tom Tromey <tom@tromey.com>
8736 * MAINTAINERS: Remove myself.
8738 2015-01-31 Doug Evans <xdje42@gmail.com>
8740 * dwarf2read.c (process_structure_scope): Update setting of
8741 TYPE_VPTR_BASETYPE, TYPE_VPTR_FIELDNO.
8742 * gdbtypes.c (internal_type_vptr_fieldno): New function.
8743 (set_type_vptr_fieldno): New function.
8744 (internal_type_vptr_basetype): New function.
8745 (set_type_vptr_basetype): New function.
8746 (get_vptr_fieldno): Update setting of TYPE_VPTR_FIELDNO,
8748 (allocate_cplus_struct_type): Initialize vptr_fieldno.
8749 (recursive_dump_type): Printing of vptr_fieldno, vptr_basetype ...
8750 (print_cplus_stuff): ... moved here.
8751 (copy_type_recursive): Don't copy TYPE_VPTR_BASETYPE.
8752 * gdbtypes.h (struct main_type): Members vptr_fieldno, vptr_basetype
8754 (struct cplus_struct_type): ... here. All uses updated.
8755 (TYPE_VPTR_FIELDNO, TYPE_VPTR_BASETYPE): Rewrite.
8756 (internal_type_vptr_fieldno, set_type_vptr_fieldno): Declare.
8757 (internal_type_vptr_basetype, set_type_vptr_basetype): Declare.
8758 * stabsread.c (read_tilde_fields): Update setting of
8759 TYPE_VPTR_FIELDNO, TYPE_VPTR_BASETYPE.
8761 2015-01-31 Doug Evans <xdje42@gmail.com>
8763 * cp-valprint.c (cp_find_class_member): Rename parameter domain_p
8765 (cp_print_class_member): Rename local domain to self_type.
8766 * dwarf2read.c (quirk_gcc_member_function_pointer): Rename local
8767 domain_type to self_type.
8768 (set_die_type) <need_gnat_info>: Handle
8769 TYPE_CODE_METHODPTR, TYPE_CODE_MEMBERPTR, TYPE_CODE_METHOD.
8770 * gdb-gdb.py (StructMainTypePrettyPrinter): Handle
8771 TYPE_SPECIFIC_SELF_TYPE.
8772 * gdbtypes.c (internal_type_self_type): New function.
8773 (set_type_self_type): New function.
8774 (smash_to_memberptr_type): Rename parameter domain to self_type.
8775 Update setting of TYPE_SELF_TYPE.
8776 (smash_to_methodptr_type): Update setting of TYPE_SELF_TYPE.
8777 (smash_to_method_type): Rename parameter domain to self_type.
8778 Update setting of TYPE_SELF_TYPE.
8779 (check_stub_method): Call smash_to_method_type.
8780 (recursive_dump_type): Handle TYPE_SPECIFIC_SELF_TYPE.
8781 (copy_type_recursive): Ditto.
8782 * gdbtypes.h (enum type_specific_kind): New value
8783 TYPE_SPECIFIC_SELF_TYPE.
8784 (struct main_type) <type_specific>: New member self_type.
8785 (struct cplus_struct_type) <fn_field.type>: Update comment.
8786 (TYPE_SELF_TYPE): Rewrite.
8787 (internal_type_self_type, set_type_self_type): Declare.
8788 * gnu-v3-abi.c (gnuv3_print_method_ptr): Rename local domain to
8790 (gnuv3_method_ptr_to_value): Rename local domain_type to self_type.
8791 * m2-typeprint.c (m2_range): Replace TYPE_SELF_TYPE with
8793 * stabsread.c (read_member_functions): Mark methods with
8794 TYPE_CODE_METHOD, not TYPE_CODE_FUNC. Update setting of
8797 2015-01-31 Doug Evans <xdje42@gmail.com>
8799 * gdbtypes.h (TYPE_SELF_TYPE): Renamed from TYPE_DOMAIN_TYPE.
8802 2015-01-31 Doug Evans <xdje42@gmail.com>
8804 * gnu-v3-abi.c (gnuv3_dynamic_class): Assert only passed structs
8805 or unions. Return zero if union.
8806 (gnuv3_get_vtable): Call check_typedef. Assert only passed structs.
8807 (gnuv3_rtti_type): Pass already-check_typedef'd value to
8809 (compute_vtable_size): Assert only passed structs.
8810 (gnuv3_print_vtable): Don't call gnuv3_get_vtable for non-structs.
8812 2015-01-31 Doug Evans <xdje42@gmail.com>
8814 * gdbtypes.c (copy_type_recursive): Handle all TYPE_SPECIFIC_FIELD
8817 2015-01-31 Gary Benson <gbenson@redhat.com>
8818 Doug Evans <dje@google.com>
8823 * cli/cli-cmds.c (complete_command): Notify user if max-completions
8825 * common/common-exceptions.h (enum errors)
8826 <MAX_COMPLETIONS_REACHED_ERROR>: New value.
8827 * completer.h (get_max_completions_reached_message): New declaration.
8828 (max_completions): Likewise.
8829 (completion_tracker_t): New typedef.
8830 (new_completion_tracker): New declaration.
8831 (make_cleanup_free_completion_tracker): Likewise.
8832 (maybe_add_completion_enum): New enum.
8833 (maybe_add_completion): New declaration.
8834 (throw_max_completions_reached_error): Likewise.
8835 * completer.c (max_completions): New global variable.
8836 (new_completion_tracker): New function.
8837 (free_completion_tracker): Likewise.
8838 (make_cleanup_free_completion_tracker): Likewise.
8839 (maybe_add_completions): Likewise.
8840 (throw_max_completions_reached_error): Likewise.
8841 (complete_line): Remove duplicates and limit result to max_completions
8843 (get_max_completions_reached_message): New function.
8844 (gdb_display_match_list): Handle max_completions.
8845 (_initialize_completer): New declaration and function.
8846 * symtab.c: Include completer.h.
8847 (completion_tracker): New static variable.
8848 (completion_list_add_name): Call maybe_add_completion.
8849 (default_make_symbol_completion_list_break_on_1): Renamed from
8850 default_make_symbol_completion_list_break_on. Maintain
8851 completion_tracker across calls to completion_list_add_name.
8852 (default_make_symbol_completion_list_break_on): New function.
8853 * top.c (init_main): Set rl_completion_display_matches_hook.
8854 * tui/tui-io.c: Include completer.h.
8855 (tui_old_rl_display_matches_hook): New static global.
8856 (tui_rl_display_match_list): Notify user if max-completions reached.
8857 (tui_setup_io): Save/restore rl_completion_display_matches_hook.
8858 * NEWS (New Options): Mention set/show max-completions.
8860 2015-01-31 Gary Benson <gbenson@redhat.com>
8862 * symtab.c (struct add_name_data) <code>: New field.
8864 (add_symtab_completions): New function.
8865 (symtab_expansion_callback): Likewise.
8866 (default_make_symbol_completion_list_break_on): Set datum.code.
8867 Move minimal symbol scan before calling expand_symtabs_matching.
8868 Scan known primary symtabs for externs and statics before calling
8869 expand_symtabs_matching. Pass symtab_expansion_callback as
8870 expansion_notify argument to expand_symtabs_matching. Do not scan
8871 primary symtabs for externs and statics after calling
8872 expand_symtabs_matching.
8874 2015-01-31 Gary Benson <gbenson@redhat.com>
8876 * symfile.h (expand_symtabs_exp_notify_ftype): New typedef.
8877 (struct quick_symbol_functions) <expand_symtabs_matching>:
8878 New argument expansion_notify. All uses updated.
8879 (expand_symtabs_matching): New argument expansion_notify.
8881 * symfile-debug.c (debug_qf_expand_symtabs_matching):
8882 Also print expansion notify.
8883 * symtab.c (expand_symtabs_matching_via_partial): Call
8884 expansion_notify whenever a partial symbol table is expanded.
8885 * dwarf2read.c (dw2_expand_symtabs_matching): Call
8886 expansion_notify whenever a symbol table is instantiated.
8888 2015-01-31 Doug Evans <xdje42@gmail.com>
8890 * cli-out.c: #include completer.h, readline/readline.h.
8891 (cli_mld_crlf, cli_mld_putch, cli_mld_puts): New functions.
8892 (cli_mld_flush, cld_mld_erase_entire_line): Ditto.
8893 (cli_mld_beep, cli_mld_read_key, cli_display_match_list): Ditto.
8894 * cli-out.h (cli_display_match_list): Declare.
8895 * completer.c (MB_INVALIDCH, MB_NULLWCH): New macros.
8896 (ELLIPSIS_LEN): Ditto.
8897 (gdb_get_y_or_n, gdb_display_match_list_pager): New functions.
8898 (gdb_path_isdir, gdb_printable_part, gdb_fnwidth): Ditto.
8899 (gdb_fnprint, gdb_print_filename): Ditto.
8900 (gdb_complete_get_screenwidth, gdb_display_match_list_1): Ditto.
8901 (gdb_display_match_list): Ditto.
8902 * completer.h (mld_crlf_ftype, mld_putch_ftype): New typedefs.
8903 (mld_puts_ftype, mld_flush_ftype, mld_erase_entire_line_ftype): Ditto.
8904 (mld_beep_ftype, mld_read_key_ftype): Ditto.
8905 (match_list_displayer): New struct.
8906 (gdb_display_match_list): Declare.
8907 * top.c (init_main): Set rl_completion_display_matches_hook.
8908 * tui/tui-io.c: #include completer.h.
8909 (printable_part, PUTX, print_filename, get_y_or_n): Delete.
8910 (tui_mld_crlf, tui_mld_putch, tui_mld_puts): New functions.
8911 (tui_mld_flush, tui_mld_erase_entire_line, tui_mld_beep): Ditto.
8912 (tui_mld_getc, tui_mld_read_key): Ditto.
8913 (tui_rl_display_match_list): Rewrite.
8914 (tui_handle_resize_during_io): New arg for_completion. All callers
8917 2015-01-31 Doug Evans <xdje42@gmail.com>
8919 Add symbol lookup cache.
8920 * NEWS: Document new options and commands.
8921 * symtab.c (symbol_cache_key): New static global.
8922 (DEFAULT_SYMBOL_CACHE_SIZE, MAX_SYMBOL_CACHE_SIZE): New macros.
8923 (SYMBOL_LOOKUP_FAILED): New macro.
8924 (symbol_cache_slot_state): New enum.
8925 (block_symbol_cache): New struct.
8926 (symbol_cache): New struct.
8927 (new_symbol_cache_size, symbol_cache_size): New static globals.
8928 (hash_symbol_entry, eq_symbol_entry): New functions.
8929 (symbol_cache_byte_size, resize_symbol_cache): New functions.
8930 (make_symbol_cache, free_symbol_cache): New functions.
8931 (get_symbol_cache, symbol_cache_cleanup): New function.
8932 (set_symbol_cache_size, set_symbol_cache_size_handler): New functions.
8933 (symbol_cache_lookup, symbol_cache_clear_slot): New function.
8934 (symbol_cache_mark_found, symbol_cache_mark_not_found): New functions.
8935 (symbol_cache_flush, symbol_cache_dump): New functions.
8936 (maintenance_print_symbol_cache): New function.
8937 (maintenance_flush_symbol_cache): New function.
8938 (symbol_cache_stats): New function.
8939 (maintenance_print_symbol_cache_statistics): New function.
8940 (symtab_new_objfile_observer): New function.
8941 (symtab_free_objfile_observer): New function.
8942 (lookup_static_symbol, lookup_global_symbol): Use symbol cache.
8943 (_initialize_symtab): Init symbol_cache_key. New parameter
8944 maint symbol-cache-size. New maint commands print symbol-cache,
8945 print symbol-cache-statistics, flush-symbol-cache.
8946 Install new_objfile, free_objfile observers.
8948 2015-01-31 Joel Brobecker <brobecker@adacore.com>
8951 * symfile.c (clear_symtab_users): Move call to breakpoint_re_set
8954 2015-01-31 Doug Evans <xdje42@gmail.com>
8956 * NEWS: Mention inlined scripts in .debug_gdb_scripts section.
8957 * auto-load.c: #include ctype.h.
8958 (struct auto_load_pspace_info): Replace member loaded_scripts with
8959 new members loaded_script_files, loaded_script_texts.
8960 (auto_load_pspace_data_cleanup): Update.
8961 (init_loaded_scripts_info): Update.
8962 (get_auto_load_pspace_data_for_loading): Update.
8963 (maybe_add_script_file): Renamed from maybe_add_script. All callers
8965 (maybe_add_script_text): New function.
8966 (clear_section_scripts): Update.
8967 (source_script_file, execute_script_contents): New functions.
8968 (source_section_scripts): Add support for
8969 SECTION_SCRIPT_ID_PYTHON_TEXT, SECTION_SCRIPT_ID_GUILE_TEXT.
8970 (print_scripts): New function.
8971 (auto_load_info_scripts): Also print inlined scripts.
8972 (maybe_print_unsupported_script_warning): Renamed from
8973 unsupported_script_warning_print. All callers updated.
8974 (maybe_print_script_not_found_warning): Renamed from
8975 script_not_found_warning_print. All callers updated.
8976 * extension-priv.h (struct extension_language_script_ops): New member
8977 objfile_script_executor.
8978 * extension.c (ext_lang_objfile_script_executor): New function.
8979 * extension.h (objfile_script_executor_func): New typedef.
8980 (ext_lang_objfile_script_executor): Declare.
8981 * guile/guile-internal.h (gdbscm_execute_objfile_script): Declare.
8982 * guile/guile.c (guile_extension_script_ops): Update.
8983 * guile/scm-objfile.c (gdbscm_execute_objfile_script): New function.
8984 * python/python.c (python_extension_script_ops): Update.
8985 (gdbpy_execute_objfile_script): New function.
8987 2015-01-31 Eli Zaretskii <eliz@gnu.org>
8989 * tui/tui-io.c (tui_expand_tabs): New function.
8990 (tui_puts, tui_redisplay_readline): Expand TABs into the
8991 appropriate number of spaces.
8992 * tui/tui-regs.c: Include tui-io.h.
8993 (tui_register_format): Call tui_expand_tabs to expand TABs into
8994 the appropriate number of spaces.
8995 * tui/tui-io.h: Add prototype for tui_expand_tabs.
8997 2015-01-30 Doug Evans <dje@google.com>
8999 * NEWS: "info source" command now display producer string if present.
9000 * source.c (source_info): Print producer string if present.
9002 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
9004 * varobj.c (varobj_delete): Fix comment.
9006 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
9008 * varobj.c (create_child): Modify comment.
9010 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
9012 * ada-varobj.c (ada_number_of_children): Constify struct varobj *
9014 (ada_name_of_variable): Same.
9015 (ada_path_expr_of_child): Same.
9016 (ada_value_of_variable): Same.
9017 (ada_value_is_changeable_p): Same.
9018 (ada_value_has_mutated): Same.
9019 * c-varobj.c (varobj_is_anonymous_child): Same.
9020 (c_is_path_expr_parent): Same.
9021 (c_number_of_children): Same.
9022 (c_name_of_variable): Same.
9023 (c_path_expr_of_child): Same.
9025 (c_value_of_variable): Same.
9026 (cplus_number_of_children): Same.
9027 (cplus_name_of_variable): Same.
9028 (cplus_path_expr_of_child): Same.
9029 (cplus_value_of_variable): Same.
9030 * jv-varobj.c (java_number_of_children): Same.
9031 (java_name_of_variable): Same.
9032 (java_path_expr_of_child): Same.
9033 (java_value_of_variable): Same.
9034 * varobj.c (number_of_children): Same.
9035 (name_of_variable): Same.
9037 (varobj_ensure_python_env): Same.
9038 (varobj_get_objname): Same.
9039 (varobj_get_expression): Same.
9040 (varobj_get_display_format): Same.
9041 (varobj_get_display_hint): Same.
9042 (varobj_has_more): Same.
9043 (varobj_get_thread_id): Same.
9044 (varobj_get_frozen): Same.
9045 (dynamic_varobj_has_child_method): Same.
9046 (varobj_get_gdb_type): Same.
9047 (is_path_expr_parent): Same.
9048 (varobj_default_is_path_expr_parent): Same.
9049 (varobj_get_language): Same.
9050 (varobj_get_attributes): Same.
9051 (varobj_is_dynamic_p): Same.
9052 (varobj_get_child_range): Same.
9053 (varobj_value_has_mutated): Same.
9054 (varobj_get_value_type): Same.
9055 (number_of_children): Same.
9056 (name_of_variable): Same.
9057 (check_scope): Same.
9058 (varobj_editable_p): Same.
9059 (varobj_value_is_changeable_p): Same.
9060 (varobj_floating_p): Same.
9061 (varobj_default_value_is_changeable_p): Same.
9063 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
9065 * varobj.c (varobj_get_path_expr): Set var->path_expr.
9066 * c-varobj.c (c_path_expr_of_child): Set local var instead of
9068 (cplus_path_expr_of_child): Same.
9070 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
9072 * mi-cmd-var.c (print_varobj): Free varobj_get_expression
9074 (mi_cmd_var_info_expression): Same.
9075 * varobj.c (varobj_get_expression): Mention in the comment that
9076 the result must by freed by the caller.
9078 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
9080 * mi/mi-cmd-var.c (mi_cmd_var_info_type): Free result of
9082 (varobj_update_one): Same.
9083 * varobj.c (update_type_if_necessary): Free curr_type_str and
9085 (varobj_get_type): Specify in comment that the result needs to be
9086 freed by the caller.
9088 2015-01-29 Doug Evans <dje@google.com>
9091 * dwarf2read.c (dwarf_decode_line_header): Punt if version > 4.
9093 2015-01-25 Mark Wielaard <mjw@redhat.com>
9095 * dwarf2read.c (checkproducer): Call producer_is_gcc.
9096 * utils.c (producer_is_gcc_ge_4): Likewise.
9097 (producer_is_gcc): New function.
9098 * utils.h (producer_is_gcc): New declaration.
9100 2015-01-29 Joel Brobecker <brobecker@adacore.com>
9102 * gdbtypes.h (struct dynamic_prop): New PROP_ADDR_OFFSET enum
9104 * gdbtypes.c (resolve_dynamic_type_internal): Replace "addr"
9105 parameter by "addr_stack" parameter.
9106 (resolve_dynamic_range): Replace "addr" parameter by
9107 "stack_addr" parameter. Update function documentation.
9108 Update code accordingly.
9109 (resolve_dynamic_array, resolve_dynamic_union)
9110 (resolve_dynamic_struct, resolve_dynamic_type_internal): Likewise.
9111 (resolve_dynamic_type): Update code, following the changes made
9112 to resolve_dynamic_type_internal's interface.
9113 * dwarf2loc.h (struct property_addr_info): New.
9114 (dwarf2_evaluate_property): Replace "address" parameter
9115 by "addr_stack" parameter. Adjust function documentation.
9116 (struct dwarf2_offset_baton): New.
9117 (struct dwarf2_property_baton): Update documentation of
9118 field "referenced_type" to be more general. New field
9119 "offset_info" in union data field.
9120 * dwarf2loc.c (dwarf2_evaluate_property): Replace "address"
9121 parameter by "addr_stack" parameter. Adjust code accordingly.
9122 Add support for PROP_ADDR_OFFSET properties.
9123 * dwarf2read.c (attr_to_dynamic_prop): Add support for
9124 DW_AT_data_member_location attributes as well. Use case
9125 statements instead of if/else condition.
9127 2015-01-29 Joel Brobecker <brobecker@adacore.com>
9129 * ada-varobj.c (ada_varobj_get_array_number_of_children):
9130 Return zero if PARENT_VALUE is NULL and parent_type's
9131 range type is dynamic.
9133 2015-01-29 Joel Brobecker <brobecker@adacore.com>
9135 * gdbtypes.c (is_dynamic_type_internal) <TYPE_CODE_RANGE>: Return
9136 nonzero if the type's subtype is dynamic.
9137 (resolve_dynamic_range): Also resolve the range's subtype.
9139 2015-01-29 Alexander Klimov <alserkli@inbox.ru> (tiny patch)
9141 Pushed by Joel Brobecker <brobecker@adacore.com>.
9142 * symfile.c (unmap_overlay_command): Initialize sec to NULL.
9144 2015-01-27 Doug Evans <dje@google.com>
9146 * NEWS: Mention gdb.Objfile.username.
9147 * python/py-objfile.c (objfpy_get_username): New function.
9148 (objfile_getset): Add "username".
9150 2015-01-24 Mark Wielaard <mjw@redhat.com>
9152 * stack.c (return_command): Markup warning message with _.
9154 2015-01-24 Doug Evans <xdje42@gmail.com>
9156 * gdbtypes.h (TYPE_TYPE_SPECIFIC): Delete.
9158 2015-01-24 Jan Kratochvil <jan.kratochvil@redhat.com>
9160 Fix 100x slowdown regression on DWZ files.
9161 * dwarf2read.c (struct dwarf2_per_objfile): Add line_header_hash.
9162 (struct line_header): Add offset and offset_in_dwz.
9163 (dwarf_decode_lines): Add parameter decode_mapping to the declaration.
9164 (free_line_header_voidp): New declaration.
9165 (line_header_hash, line_header_hash_voidp, line_header_eq_voidp): New
9167 (dwarf2_build_include_psymtabs): Update dwarf_decode_lines caller.
9168 (handle_DW_AT_stmt_list): Use line_header_hash.
9169 (free_line_header_voidp): New function.
9170 (dwarf_decode_line_header): Initialize offset and offset_in_dwz.
9171 (dwarf_decode_lines): New parameter decode_mapping, use it.
9172 (dwarf2_free_objfile): Free line_header_hash.
9174 2015-01-23 Simon Marchi <simon.marchi@ericsson.com>
9177 * valops.c (value_rtti_indirect_type): Catch exception thrown by
9180 2015-01-15 Mark Wielaard <mjw@redhat.com>
9182 * dwarf2read.c (read_subroutine_type): Set TYPE_NO_RETURN from
9184 * gdbtypes.h (struct func_type): Add is_noreturn field flag. Make
9185 calling_convention an 8 bit bit field.
9186 (TYPE_NO_RETURN): New macro.
9187 * infcmd.c (finish_command): Query if function does not return
9189 * stack.c (return_command): Likewise.
9191 2015-01-23 Pedro Alves <palves@redhat.com>
9193 * linux-nat.c (linux_is_async_p): New macro.
9194 (linux_nat_is_async_p):
9195 (linux_nat_terminal_inferior): Check whether the target can async
9196 instead of whether it is already async.
9197 (linux_nat_terminal_ours): Don't check whether the target is
9199 (linux_async_pipe): Use linux_is_async_p.
9201 2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
9203 * NEWS (Changes since GDB 7.9): Add 'thread apply all' option
9205 * thread.c (tp_array_compar_ascending, tp_array_compar): New.
9206 (thread_apply_all_command): Parse CMD for tp_array_compar_ascending.
9207 Sort tp_array using tp_array_compar.
9208 (_initialize_thread): Extend thread_apply_all_command help.
9210 2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
9212 * corelow.c (core_open): Call also thread_command.
9213 * gdbthread.h (thread_command): New prototype moved from ...
9214 * thread.c (thread_command): ... here.
9215 (thread_command): Make it global.
9217 2015-01-22 Pedro Alves <palves@redhat.com>
9219 * configure.ac [*mingw32*]: Check $curses_found instead of
9221 * configure: Regenerate.
9222 * windows-termcap.c: Remove HAVE_CURSES_H, HAVE_NCURSES_H and
9223 HAVE_NCURSES_NCURSES_H checks.
9225 2015-01-22 Eli Zaretskii <eliz@gnu.org>
9227 * tui/tui.c (tui_enable) [__MINGW32__]: If the call to 'newterm'
9228 fails with the 1st arg NULL, try again with "unknown". Don't test
9229 the "cup" capability: it isn't supported by the Windows port of
9230 ncurses, but the Windows console driver is still capable of
9233 2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
9235 * compile/compile.c (_initialize_compile): Use -fPIE for compile_args.
9237 2015-01-22 Eli Zaretskii <eliz@gnu.org>
9239 * Makefile.in (HFILES_NO_SRCDIR): Remove ada-varobj.h.
9240 (ALLDEPFILES): Remove irix5-nat.c. These two are part of the
9241 reason that "make TAGS" is broken.
9243 2015-01-22 Chen Gang <gang.chen.5i5j@gmail.com>
9245 * hppa-tdep.c (inst_saves_gr): Fix logical working flow issues
9246 and check additional store instructions.
9248 2015-01-21 Wei-cheng Wang <cole945@gmail.com>
9250 * MAINTAINERS (Write After Approval): Add "Wei-cheng Wang".
9252 2015-01-21 Wei-cheng Wang <cole945@gmail.com>
9254 * ppc-linux-tdep.c (ppc_skip_trampoline_code,
9255 ppc_canonicalize_syscall, ppc_linux_syscall_record,
9256 ppc_linux_record_signal, ppc_init_linux_record_tdep): Add comments.
9257 * ppc64-tdep.c (ppc64_skip_trampoline_code): Likewise.
9258 * rs6000-tdep.c (rs6000_epilogue_frame_cache,
9259 rs6000_epilogue_frame_this_id, rs6000_epilogue_frame_prev_register,
9260 rs6000_epilogue_frame_sniffer, ppc_record_vsr, ppc_process_record_op4,
9261 ppc_process_record_op19, ppc_process_record_op31,
9262 ppc_process_record_op59, ppc_process_record_op60,
9263 ppc_process_record_op63): Likewise.
9265 2015-01-20 Joel Brobecker <brobecker@adacore.com>
9267 * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason_string)
9268 (linux_ptrace_test_ret_to_nx): Use safe_strerror instead of
9271 2015-01-20 Wei-cheng Wang <cole945@gmail.com>
9273 * rs6000-tdep.c (ppc_process_record_op4, ppc_process_record_op19,
9274 ppc_process_record_op31, ppc_process_record_op59,
9275 ppc_process_record_op60, ppc_process_record_op63,
9276 ppc_process_record): Fix -Wformat warning.
9277 * rs6000-tdep.c (rs6000_epilogue_frame_cache, ppc_process_record_op60):
9278 Remove unused variables.
9280 2015-01-20 Chen Gang <gang.chen.5i5j@gmail.com>
9282 * MAINTAINERS (Write After Approval): Add "Chen Gang".
9284 2015-01-19 Eli Zaretskii <eliz@gnu.org>
9286 * configure.ac [*mingw32*]: Only add windows-termcap.o to
9287 CONFIG_OBS if not building with a curses library.
9288 * configure: Regenerate.
9290 * windows-termcap.c: Include defs.h. Make the whole body empty if
9291 either one of HAVE_CURSES_H or HAVE_NCURSES_H or
9292 HAVE_NCURSES_NCURSES_H is defined.
9294 2015-01-19 Joel Brobecker <brobecker@adacore.com>
9296 * rs6000-tdep.c (rs6000_gdbarch_init): Move divide operator
9297 from end of line to start of next line.
9299 2015-01-17 Wei-cheng Wang <cole945@gmail.com>
9301 * ppc-linux-tdep.c (ppc_skip_trampoline_code):
9302 Scan PLT stub backward for reverse debugging.
9303 * ppc64-tdep.c (ppc64_skip_trampoline_code): Likewise.
9305 2015-01-17 Wei-cheng Wang <cole945@gmail.com>
9306 Ulrich Weigand <uweigand@de.ibm.com>
9308 * configure.tgt (powerpc*-*-linux): Add linux-record.o to
9310 (ppc_linux_record_tdep, ppc64_linux_record_tdep): New for linux syscall
9312 (ppc_canonicalize_syscall, ppc_linux_syscall_record,
9313 ppc_linux_record_signal, ppc_init_linux_record_tdep): New functions.
9314 (ppc_linux_init_abi): Set process_record, process_record_signal.
9315 * ppc-tdep.h (struct gdbarch_tdep): Add ppc_syscall_record and
9316 ppc_linux_record_tdep to gdbarch_tdep.
9317 (ppc_process_record): New declaration.
9318 * rs6000-tdep.c (ppc_record_vsr, ppc_process_record_op4,
9319 ppc_process_record_op19, ppc_process_record_op31,
9320 ppc_process_record_op59, ppc_process_record_op60,
9321 ppc_process_record_op63, ppc_process_record): New functions.
9323 2015-01-17 Wei-cheng Wang <cole945@gmail.com>
9325 * rs6000-tdep.c (rs6000_in_function_epilogue_p): Rename to
9326 rs6000_in_function_epilogue_frame_p and add an argument
9328 (rs6000_epilogue_frame_cache, rs6000_epilogue_frame_this_id,
9329 rs6000_epilogue_frame_prev_register, rs6000_epilogue_frame_sniffer):
9331 (rs6000_epilogue_frame_unwind): New.
9332 (rs6000_gdbarch_init): Append epilogue unwinder.
9334 2015-01-16 Sergio Durigan Junior <sergiodj@redhat.com>
9336 * nat/linux-personality.c: Replace "#ifndef
9337 HAVE_DECL_ADDR_NO_RANDOMIZE" by "#if
9338 !HAVE_DECL_ADDR_NO_RANDOMIZE", fixing a regression in RHEL-5
9341 2015-01-16 Eli Zaretskii <eliz@gnu.org>
9343 * tui/tui-win.c (tui_rehighlight_all, tui_set_var_cmd): New
9345 (_initialize_tui_win) <border-kind, border-mode>:
9346 <active-border-mode>: Use tui_set_var_cmd as the "set" function.
9347 (tui_set_tab_width_command): Fix the commentary.
9349 * tui/tui-win.h: Add prototype for tui_rehighlight_all.
9351 * tui/tui-win.c (tui_scroll_left_command, tui_scroll_right_command):
9353 (tui_set_tab_width_command): Delete and recreate the source and
9354 the disassembly windows, to show the effect of the changed tab
9357 * tui/tui-data.h (LINE_PREFIX): Make shorter
9358 (MAX_PID_WIDTH): Enlarge from 14 to 19, to leave enough space for
9359 "Thread NNNNN.XXXX" thread ID notation on Windows.
9361 2015-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
9363 Fix gcc-5 compilation.
9364 * hppa-tdep.c (inst_saves_gr): Fix parentheses typo.
9366 2015-01-15 Sergio Durigan Junior <sergiodj@redhat.com>
9368 * Makefile.in (HFILES_NO_SRCDIR): Add nat/linux-personality.h.
9369 (linux-personality.o): New rule.
9370 * common/common-defs.h: Include <stdint.h>.
9371 * config/aarch64/linux.mh (NATDEPFILES): Include
9372 linux-personality.o.
9373 * config/alpha/alpha-linux.mh (NATDEPFILES): Likewise.
9374 * config/arm/linux.mh (NATDEPFILES): Likewise.
9375 * config/i386/linux64.mh (NATDEPFILES): Likewise.
9376 * config/i386/linux.mh (NATDEPFILES): Likewise.
9377 * config/ia64/linux.mh (NATDEPFILES): Likewise.
9378 * config/m32r/linux.mh (NATDEPFILES): Likewise.
9379 * config/m68k/linux.mh (NATDEPFILES): Likewise.
9380 * config/mips/linux.mh (NATDEPFILES): Likewise.
9381 * config/pa/linux.mh (NATDEPFILES): Likewise.
9382 * config/powerpc/linux.mh (NATDEPFILES): Likewise.
9383 * config/powerpc/ppc64-linux.mh (NATDEPFILES): Likewise.
9384 * config/powerpc/spu-linux.mh (NATDEPFILES): Likewise.
9385 * config/s390/linux.mh (NATDEPFILES): Likewise.
9386 * config/sparc/linux64.mh (NATDEPFILES): Likewise.
9387 * config/sparc/linux.mh (NATDEPFILES): Likewise.
9388 * config/tilegx/linux.mh (NATDEPFILES): Likewise.
9389 * config/xtensa/linux.mh (NATDEPFILES): Likewise.
9390 * defs.h: Remove #include <stdint.h> (moved to
9391 common/common-defs.h).
9392 * linux-nat.c: Include nat/linux-personality.h. Remove #include
9393 <sys/personality.h>; do not define ADDR_NO_RANDOMIZE (moved to
9394 nat/linux-personality.c).
9395 (linux_nat_create_inferior): Remove code to disable address space
9396 randomization (moved to nat/linux-personality.c). Create cleanup
9397 to disable address space randomization.
9398 * nat/linux-personality.c: New file.
9399 * nat/linux-personality.h: Likewise.
9401 2015-01-15 Sergio Durigan Junior <sergiodj@redhat.com>
9403 * Makefile.in (ALLDEPFILES): Including common/mingw-strerror.c and
9404 common/posix-strerror.c.
9405 (posix-strerror.o): New rule.
9406 (mingw-strerror.o): Likewise.
9407 * common/common-utils.h (safe_strerror): Move prototype to here,
9409 * common/common.host: New file.
9410 * common/mingw-strerror.c: Likewise.
9411 * common/posix-strerror.c: Likewise.
9412 * configure: Regenerated.
9413 * configure.ac: Source common/common.host. Add variable
9414 common_host_obs to gdb_host_obs.
9415 * contrib/ari/gdb_ari.sh: Mention gdb/common/mingw-strerror.c and
9416 gdb/common/posix-strerror.c when warning about the use of
9418 * mingw-hdep.c (safe_strerror): Remove definition; move it to
9419 common/mingw-strerror.c.
9420 * posix-hdep.c (safe_strerror): Remove definition; move it to
9421 common/posix-hdep.c.
9422 * utils.h (safe_strerror): Remove prototype; move to
9423 common/common-utils.h.
9425 2015-01-15 Joel Brobecker <brobecker@adacore.com>
9429 2015-01-15 Joel Brobecker <brobecker@adacore.com>
9431 * ada-lang.c (ada_array_bound_from_type): Ignore array's parallel
9432 ___XA type if the array has already been fixed.
9434 2015-01-14 Yao Qi <yao@codesourcery.com>
9436 * Makefile.in (ppc-linux.o): New rule.
9437 * config/powerpc/ppc64-linux.mh (NATDEPFILES): Add ppc-linux.o.
9438 * configure.ac: AC_CHECK_FUNCS(getauxval).
9439 * config.in: Re-generated.
9440 * configure: Re-generated.
9441 * nat/ppc-linux.h [__powerpc64__] (ppc64_64bit_inferior_p):
9443 * nat/ppc-linux.c: New file.
9444 * ppc-linux-nat.c (ppc_linux_target_wordsize) [__powerpc64__]:
9445 Call ppc64_64bit_inferior_p.
9447 2015-01-14 Yao Qi <yao@codesourcery.com>
9449 * ppc-linux-nat.c (PT_ORIG_R3, PT_TRAP): Move to
9451 (PPC_FEATURE_CELL, PPC_FEATURE_BOOKE): Likewise.
9452 (PPC_FEATURE_HAS_DFP): Likewise.
9453 (PTRACE_GETVRREGS, PTRACE_SETVRREGS): Likewise.
9454 (PTRACE_GETVSXREGS, PTRACE_SETVSXREGS): Likewise.
9455 (PTRACE_GETEVRREGS, PTRACE_SETEVRREGS): Likewise.
9456 Include "nat/ppc-linux.h".
9457 * nat/ppc-linux.h: New file.
9458 * Makefile.in (HFILES_NO_SRCDIR): Add nat/ppc-linux.h.
9460 2015-01-14 Pedro Alves <palves@redhat.com>
9463 * breakpoint.c: Include "interps.h".
9464 (bpstat_do_actions_1): Also check whether the interpreter is
9467 2015-01-14 Pedro Alves <palves@redhat.com>
9470 * infrun.c (reinstall_readline_callback_handler_cleanup): Don't
9471 reinstall if the interpreter is sync.
9473 2015-01-13 Doug Evans <dje@google.com>
9475 * objfiles.c (objfile_filename): New function.
9476 * objfiles.h (objfile_filename): Declare it.
9477 (objfile_name): Add function comment.
9478 * python/py-objfile.c (objfpy_lookup_objfile_by_name): Try both the
9479 bfd file name (which may be realpath'd), and the original name.
9481 2015-01-13 Joel Brobecker <brobecker@adacore.com>
9483 * NEWS: Create a new section for the next release branch.
9484 Rename the section of the current branch, now that it has
9487 2015-01-13 Joel Brobecker <brobecker@adacore.com>
9489 GDB 7.9 branch created (92fc2e6978d9a7c8324c7e851dbee59e22ec7a37):
9490 * version.in: Bump version to 7.9.50.DATE-cvs.
9492 2015-01-13 Joel Brobecker <brobecker@adacore.com>
9494 * nat/linux-procfs.c (linux_proc_attach_tgid_threads):
9495 Remove trailing new-line in argument of call to warning.
9497 2015-01-13 Joel Brobecker <brobecker@adacore.com>
9499 * linux-nat.c (attach_proc_task_lwp_callback): Remove trailing
9500 new-line in argument of call to "warning".
9502 2015-01-13 Joel Brobecker <brobecker@adacore.com>
9504 * ada-lang.c (ada_lookup_symbol_nonlocal): If name not found
9505 in static block, then try searching for primitive types.
9507 2015-01-12 Patrick Palka <patrick@parcs.ath.cx>
9509 * top.h (gdb_add_history): Declare.
9510 * top.c (command_count): New variable.
9511 (gdb_add_history): New function.
9512 (gdb_safe_append_history): New static function.
9513 (quit_force): Call it.
9514 (command_line_input): Use gdb_add_history instead of
9516 * event-top.c (command_line_handler): Likewise.
9518 2015-01-12 James Clarke <jrtc27@jrtc27.com> (tiny patch)
9521 * darwin-nat.c: Replace <machine/setjmp.h> #include by
9522 <setjmp.h> #include.
9524 2015-01-11 Doug Evans <xdje42@gmail.com>
9526 * dwarf2read.c (compute_delayed_physnames): Use TYPE_FN_FIELD_PHYSNAME.
9528 2015-01-11 Doug Evans <xdje42@gmail.com>
9531 * NEWS: The "maint demangle" command is renamed as "demangle".
9532 * demangle.c: #include cli/cli-utils.h, language.h.
9533 (demangle_command): New function.
9534 (_initialize_demangle): Add new command "demangle".
9535 * maint.c (maintenance_demangle): Stub out.
9536 (_initialize_maint_cmds): Update help text for "maint demangle",
9537 and mark as deprecated.
9539 2015-01-11 Mark Kettenis <kettenis@gnu.org>
9541 * inf-ptrace.c (inf_ptrace_follow_fork): Adjust now that
9542 inferior_thread is a function.
9544 2015-01-09 Patrick Palka <patrick@parcs.ath.cx>
9546 * Makefile.in (.y.c): Don't munge yacc's #line
9549 2015-01-09 Patrick Palka <patrick@parcs.ath.cx>
9551 * utils.c (defaulted_query): Rewrite to use gdb_readline_wrapper
9552 to prompt for input.
9553 * tui/tui-hooks.c (tui_query_hook): Remove.
9554 (tui_install_hooks): Don't set deprecated_query_hook.
9555 * tui/tui-io.c (tui_redisplay_readline): Fix off-by-one error in
9556 height calculation. Always update the command window's cur_line.
9558 2015-01-09 Pedro Alves <palves@redhat.com>
9560 * breakpoint.c (hardware_breakpoint_inserted_here_p): New
9562 * breakpoint.h (hardware_breakpoint_inserted_here_p): New
9564 * linux-nat.c (linux_nat_status_is_event): Move higher up in file.
9565 (linux_resume_one_lwp): Store the thread's PC. Adjust to clear
9567 (check_stopped_by_watchpoint): New function.
9568 (save_sigtrap): Reimplement.
9569 (linux_nat_stopped_by_watchpoint): Adjust.
9570 (linux_nat_lp_status_is_event): Delete.
9571 (stop_wait_callback): Only call save_sigtrap after storing the
9573 (status_callback): If the thread had been stopped for a breakpoint
9574 that has since been removed, discard the event and resume the LWP.
9575 (count_events_callback, select_event_lwp_callback): Use
9576 lwp_status_pending_p instead of linux_nat_lp_status_is_event.
9577 (cancel_breakpoint): Rename to ...
9578 (check_stopped_by_breakpoint): ... this. Record whether the LWP
9579 stopped for a software breakpoint or hardware breakpoint.
9580 (select_event_lwp): Only give preference to the stepping LWP in
9581 all-stop mode. Adjust comments.
9582 (stop_and_resume_callback): Remove references to new_pending_p.
9583 (linux_nat_filter_event): Likewise. Leave exit events of the
9584 leader thread pending here. Handle signal short circuiting here.
9585 Only call save_sigtrap after storing the pending waitstatus.
9586 (linux_nat_wait_1): Remove 'retry' label. Remove references to
9587 new_pending. Don't handle leaving events the caller is not
9588 interested in pending here, nor handle signal short-circuiting
9589 here. Also give equal priority to all LWPs that have had events
9590 in non-stop mode. If reporting a software breakpoint event,
9591 unadjust the LWP's PC.
9592 * linux-nat.h (enum lwp_stop_reason): New.
9593 (struct lwp_info) <stop_pc>: New field.
9594 (struct lwp_info) <stopped_by_watchpoint>: Delete field.
9595 (struct lwp_info) <stop_reason>: New field.
9596 * x86-linux-nat.c (x86_linux_prepare_to_resume): Adjust.
9598 2015-01-09 Pedro Alves <palves@redhat.com>
9600 * linux-nat.c (linux_handle_extended_wait) <PTRACE_EVENT_EXEC>:
9601 Set the LWP's 'resumed' flag.
9603 2015-01-09 Pedro Alves <palves@redhat.com>
9605 * linux-nat.c (linux_resume_one_lwp): New function.
9606 (resume_lwp): Use lwp_status_pending_p and linux_resume_one_lwp.
9607 (linux_nat_resume): Use lwp_status_pending_p and
9608 linux_resume_one_lwp.
9609 (linux_handle_syscall_trap): Use linux_resume_one_lwp.
9610 (linux_handle_extended_wait): Use linux_resume_one_lwp.
9611 (status_callback, running_callback): Use lwp_status_pending_p.
9612 (lwp_status_pending_p): New function.
9613 (stop_and_resume_callback): Use lwp_status_pending_p.
9614 (linux_nat_filter_event): Use linux_resume_one_lwp.
9615 (linux_nat_wait_1): Always use status_callback to look for an LWP
9616 with a pending status. Use linux_resume_one_lwp.
9617 (resume_stopped_resumed_lwps): Use lwp_status_pending_p and
9618 linux_resume_one_lwp.
9620 2015-01-09 Pedro Alves <palves@redhat.com>
9622 * breakpoint.c (bp_location_inserted_here_p): New function,
9623 factored out from ...
9624 (breakpoint_inserted_here_p): ... here. Use
9625 ALL_BP_LOCATIONS_AT_ADDR.
9626 (software_breakpoint_inserted_here_p): Use
9627 bp_location_inserted_here_p and ALL_BP_LOCATIONS_AT_ADDR.
9629 2014-01-09 Pedro Alves <palves@redhat.com>
9631 Skip enabling event reporting if the kernel supports
9633 * linux-thread-db.c: Include "nat/linux-ptrace.h".
9634 (thread_db_use_events): New function.
9635 (try_thread_db_load_1): Check thread_db_use_events before enabling
9637 (update_thread_state): New function.
9638 (attach_thread): Use it. Check thread_db_use_events before
9639 enabling event reporting.
9640 (thread_db_detach): Check thread_db_use_events before disabling
9642 (find_new_threads_callback): Check thread_db_use_events before
9643 enabling event reporting. Update the thread's state if not using
9644 libthread_db events.
9646 2015-01-09 Pedro Alves <palves@redhat.com>
9648 * linux-nat.c (lin_lwp_attach_lwp): Assert that the lwp id we're
9649 about to wait for is > 0.
9650 * linux-thread-db.c (find_new_threads_callback): Ignore thread if
9651 the kernel thread ID is -1.
9653 2015-01-09 Pedro Alves <palves@redhat.com>
9655 * linux-nat.c (attach_proc_task_lwp_callback): New function.
9656 (linux_nat_attach): Use linux_proc_attach_tgid_threads.
9657 (wait_lwp, linux_nat_filter_event): If not set yet, set the lwp's
9658 ptrace option flags.
9659 * linux-nat.h (struct lwp_info) <must_set_ptrace_flags>: New
9661 * nat/linux-procfs.c: Include <dirent.h>.
9662 (linux_proc_get_int): New parameter "warn". Handle it.
9663 (linux_proc_get_tgid): Adjust.
9664 (linux_proc_get_tracerpid): Rename to ...
9665 (linux_proc_get_tracerpid_nowarn): ... this.
9666 (linux_proc_pid_get_state): New function, factored out from
9667 (linux_proc_pid_has_state): ... this. Add new parameter "warn"
9669 (linux_proc_pid_is_gone): New function.
9670 (linux_proc_pid_is_stopped): Adjust.
9671 (linux_proc_pid_is_zombie_maybe_warn)
9672 (linux_proc_pid_is_zombie_nowarn): New functions.
9673 (linux_proc_pid_is_zombie): Use
9674 linux_proc_pid_is_zombie_maybe_warn.
9675 (linux_proc_attach_tgid_threads): New function.
9676 * nat/linux-procfs.h (linux_proc_get_tgid): Update comment.
9677 (linux_proc_get_tracerpid): Rename to ...
9678 (linux_proc_get_tracerpid_nowarn): ... this, and update comment.
9679 (linux_proc_pid_is_gone): New declaration.
9680 (linux_proc_pid_is_zombie): Update comment.
9681 (linux_proc_pid_is_zombie_nowarn): New declaration.
9682 (linux_proc_attach_lwp_func): New typedef.
9683 (linux_proc_attach_tgid_threads): New declaration.
9684 * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason): Adjust to
9685 use nowarn functions.
9686 (linux_ptrace_attach_fail_reason_string): Move here from
9687 gdbserver/linux-low.c and rename.
9688 (ptrace_supports_feature): If the current ptrace options are not
9689 known yet, check them now, instead of asserting.
9690 * nat/linux-ptrace.h (linux_ptrace_attach_fail_reason_string):
9693 2015-01-09 Pedro Alves <palves@redhat.com>
9695 * linux-thread-db.c (thread_db_find_new_threads_silently)
9696 (try_thread_db_load_1, try_thread_db_load, thread_db_load_search)
9697 (find_new_threads_once): Print debug output on gdb_stdlog.
9699 2015-01-09 Chen Gang <gang.chen.5i5j@gmail.com>
9700 Pedro Alves <palves@redhat.com>
9702 * compile/compile.c: Include "gdb_wait.h".
9703 (do_rmdir): Check return value, and free 'zap'.
9705 2015-01-08 Pedro Alves <palves@redhat.com>
9706 Yao Qi <yao@codesourcery.com>
9708 * dwarf2loc.c (indirect_pieced_value): Don't call
9709 gdb_sign_extend. Call extract_signed_integer instead.
9710 * utils.c (gdb_sign_extend): Remove.
9711 * utils.h (gdb_sign_extend): Remove declaration.
9713 2015-01-07 Pierre Muller <muller@sourceware.org>
9716 * stabsread.c (define_symbol): Set language for C++ special symbols.
9718 2015-01-07 Patrick Palka <patrick@parcs.ath.cx>
9720 * inflow.c (initial_gdb_ttystate): Tweak comment.
9722 2015-01-07 Joel Brobecker <brobecker@adacore.com>
9724 * inflow.c (set_initial_gdb_ttystate): Add empty line after
9725 comment documenting function.
9727 2015-01-07 Patrick Palka <patrick@parcs.ath.cx>
9729 * terminal.h (set_initial_gdb_ttystate): Declare.
9730 * inflow.c (initial_gdb_ttystate): New static variable.
9731 (set_initial_gdb_ttystate): New setter.
9732 (child_terminal_init_with_pgrp): Copy initial_gdb_ttystate
9733 instead of our current terminal state.
9734 * top.c (gdb_init): Call set_initial_gdb_ttystate.
9736 2015-01-07 Joel Brobecker <brobecker@adacore.com>
9738 * guile/scm-type.c (tyscm_array_1): Add comment.
9739 * python/py-type.c (typy_array_1): Add comment.
9741 2015-01-06 Joel Brobecker <brobecker@adacore.com>
9743 * guile/scm-type.c (tyscm_array_1): Do not raise out-of-range
9744 error if N2 is equal to N1 - 1.
9746 2015-01-06 Joel Brobecker <brobecker@adacore.com>
9748 * python/py-type.c (typy_array_1): Do not raise negative-length
9749 exception if N2 is equal to N1 - 1.
9751 2015-01-03 Doug Evans <xdje42@gmail.com>
9753 * c-exp.y: Whitespace cleanup.
9754 (classify_inner_name): Remove extra ;.
9756 2015-01-02 Maciej W. Rozycki <macro@codesourcery.com>
9758 * mips-tdep.c (mips32_scan_prologue): Keep the extracted stack
9761 2015-01-02 Doug Evans <dje@google.com>
9763 * dwarf2read.c (setup_type_unit_groups): Remove outdated comment.
9765 2015-01-02 Doug Evans <dje@google.com>
9767 * symtab.h (struct symbol): Fix typo in comment.
9769 2015-01-01 Joel Brobecker <brobecker@adacore.com>
9771 Update year range in copyright notice of all files.
9773 2015-01-01 Joel Brobecker <brobecker@adacore.com>
9775 * top.c (print_gdb_version): Update copyright year to 2015.
9777 2015-01-01 Joel Brobecker <brobecker@adacore.com>
9779 * config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2014.
9781 For older changes see ChangeLog-2014.
9787 version-control: never