* v850-tdep.c (v850_generic_reg_names, v850e_reg_names,
[deliverable/binutils-gdb.git] / gdb / ChangeLog
1 Tue Jan 26 16:02:47 1999 Mark Alexander <marka@cygnus.com>
2
3 * v850-tdep.c (v850_generic_reg_names, v850e_reg_names,
4 v850_register_names, v850_processor_type_table): Declare tables
5 and structures for handling differences in register names for
6 v850 and v850e.
7 (struct reg_list): Define new structure for creating tables
8 of register bit masks in v850e instrutions.
9 (handle_prepare, handle_pushm): New helpers for v850_scan_prologue.
10 (v850_scan_prologue): Recognize v850e instructions: callt, prepare,
11 and pushm.
12 (v850_target_architecture_hook): New function to set register
13 names based on current machine.
14 (_initialize_v850_tdep): Set up target_architecture_hook.
15 * config/v850/tm-v850.h (v850_register_names): Declare.
16 (REGISTER_NAME): Define to refer to v850_register_names.
17 (SR0_REGNUM, CTBP_REGNUM): Define.
18 (PS_REGNUM): Redefine in terms of SR0_REGNUM.
19
20 Tue Jan 26 18:27:26 1999 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
21
22 * Makefile.in (c-exp.tab.c): use BISON instead of YACC, to pick
23 the correct value from configure output.
24 (jv-exp.tab.c): ditto.
25 (f-exp.tab.c): ditto.
26 (m2-exp.tab.c): ditto.
27
28 1999-01-26 Jason Molenda (jsm@bugshack.cygnus.com)
29
30 * breakpoint.h (ep_is_exception_catchpoint): Add prototype.
31 * frame.h (select_and_print_frame): Add prototype.
32 * stack.c (func_command): Call select_and_print_frame with correct
33 number of arguments. Reformat whitespace.
34
35 Tue Jan 26 16:53:54 1999 Fernando Nasser <fnasser@cygnus.com>
36
37 * remote.c (remote_query): fix maximum packet size to account for
38 remote_debug use.
39 (putpkt): add comment to alert about extra byte need.
40
41 Mon Jan 25 19:55:30 1999 Mark Alexander <marka@cygnus.com>
42
43 * sh-tdep.c (sh_target_architecture_hook): Return immediately
44 when a matching machine is found.
45
46 Fri Jan 22 09:10:35 1999 Mark Alexander <marka@cygnus.com>
47
48 * remote-mips.c (mips_initialize): Fix parameters to clear_breakpoint.
49 (common_breakpoint): Restore support for instruction breakpoints
50 on non-LSI targets.
51
52 Thu Jan 21 17:16:19 1999 Andrew Cagney <cagney@b1.cygnus.com>
53
54 * stack.c: Close open comment.
55 * symtab.c (find_pc_sect_line): Ditto.
56
57 Thu Jan 21 17:51:51 1999 Stan Shebs <shebs@andros.cygnus.com>
58
59 * procfs.c (init_procfs_ops): New function, fills in procfs_ops,
60 init only nonzero fields, leave to_require_attach and
61 to_require_detach empty, not needed for /proc systems yet.
62 (_initialize_procfs): Call init_procfs_ops.
63
64 From J.T. Conklin <jtc@redbacknetworks.com>:
65 * top.c (init_main): Fix tipo in description of the remotetimeout
66 variable.
67 * breakpoint.c (bpstat_stop_status): Handle systems where
68 DECR_PC_AFTER_BREAK != DECR_PC_AFTER_HW_BREAK.
69
70 Thu Jan 21 17:25:46 1999 Mark Alexander <marka@cygnus.com>
71
72 * mon960-rom.c (_initialize_mon960): Call init_mon960_cmds
73 to fill in mon960_cmds structure properly.
74
75 Wed Jan 20 17:53:22 1999 Stan Shebs <shebs@andros.cygnus.com>
76
77 * remote-sds.c (sds_ops): Define only once.
78 (init_sds_ops, sds_command, _initialize_remote_sds): Declare.
79 (init_sds_ops): Init only non-zero fields.
80
81 Wed Jan 20 15:45:15 1999 Mark Alexander <marka@cygnus.com>
82
83 * h8300-tdep.c (original_register_names, h8300h_register_names,
84 h8300_register_names): Define new variables.
85 (set_register_names): New function to set register names based on
86 current CPU type.
87 (h8300_command, h8300h_command, h8300s_command): Call
88 set_register_names.
89 * config/h8300/tm-h8300.h (h8300_register_names): Declare.
90 (REGISTER_NAME): Define to refer to h8300_register_names.
91
92 1999-01-19 Fernando Nasser <fnasser@totem.to.cygnus.com>
93
94 * sol-thread.c abug-rom.c cpu32bug-rom.c dbug-rom.c m32r-rom.c
95 mac-nat.c mon960-rom.c op50-rom.c ppc-bdm.c remote-adapt.c
96 remote-array.c remote-bug.c remote-e7000.c remote-eb.c remote-es.c
97 remote-est.c remote-hms.c remote-mm.c remote-nindy.c remote-nrom.c
98 remote-os9k.c remote-rdp.c remote-sds.c remote-sim.c remote-st.c
99 remote-udi.c rom68k-rom.c sh3-rom.c sparcl-tdep.c sparclet-rom.c
100 v850ice.c win32-nat.c: cosmetic changes to conform to coding
101 standards.
102
103 1999-01-19 Jim Blandy <jimb@zwingli.cygnus.com>
104
105 Use aclocal to generate GDB's aclocal.m4 script.
106 * acinclude.m4: New file, containing the hand-written local macro
107 definitions that used to be in aclocal.m4. Don't sinclude
108 ../bfd/aclocal.m4 any more; running aclocal in this directory will
109 get us the definitions we need. HOWEVER: Do sinclude
110 ../bfd/acinclude.m4, because we need the definition of
111 BFD_NEED_DECLARATION.
112 * aclocal.m4: Regenerated by aclocal.
113 * configure: Regenerated by autoconf.
114
115 Tue Jan 19 10:27:23 1999 David Taylor <taylor@texas.cygnus.com>
116
117 * breakpoint.c (disable_breakpoints_in_shlibs): new parameter,
118 silent, controls whether to print message about removal of shared
119 library breakpoints.
120 * breakpoint.h (disable_breakpoints_in_shlibs): decl updated.
121 * irix5-nat.c (clear_solib): call disable_breakpoints_in_shlibs.
122 * osfsolib.c (clear_solib): ditto.
123 * solib.c (clear_solib): ditto.
124 * somsolib.c (som_solib_restart): update call to
125 disable_breakpoints_in_shlibs.
126
127 * target.h (child_post_attach): only declare if CHILD_POST_ATTACH
128 is define.
129
130 Tue Jan 19 18:07:11 1999 Andrew Cagney <cagney@b1.cygnus.com>
131
132 * corelow.c (solib_add_stub): Ditto.
133 (core_file_to_sym_file): Cast make_cleanup parameter.
134
135 * solib.c (symbol_add_stub, solib_map_sections): Change argument
136 to PTR insted of a char*. Matches catch_errors interface.
137
138 Mon Jan 18 14:01:24 1999 Andrew Cagney <cagney@b1.cygnus.com>
139
140 * remote-array.c (array_open): Don't use fprintf_filtered to send
141 data to the log file.
142
143 * remote-array.c (handle_load_dll): Change argument type to PTR so
144 that it is compatible with catch_errors.
145 * ocd.c (ocd_start_remote): Ditto.
146 * remote-sds.c (sds_start_remote): Ditto.
147
148 * win32-nat.c (win32_child_thread_alive): Namespace proof
149 child_thread_alive.
150 (init_child_ops): Update.
151
152 Mon Jan 18 12:03:47 1999 Andrew Cagney <cagney@b1.cygnus.com>
153
154 * remote-rdi.c (arm_rdi_open): Set gdb_hostif.hostosarg and
155 gdb_hostif.dbgarg to NULL instead of stdout.
156 (voiddummy, myprint, mywritec): Use gdb_stdout instead of stdout.
157
158 Mon Jan 18 16:40:50 1999 Stan Shebs <shebs@andros.cygnus.com>
159
160 * ser-ocd.c (ocd_open): Handle Unix case gracefully.
161
162 * target.c (dummy_target): Don't initialize statically.
163 (init_dummy_target): New function, fills in dummy_target.
164 (initialize_targets): Use it.
165 * hpux-thread.c (hpux_thread_ops): Don't initialize statically.
166 (init_hpux_thread_ops): New function, fills in hpux_thread_ops.
167 (_initialize_hpux_thread): Use it.
168 * m3-nat.c (m3_ops): Don't initialize statically.
169 (init_m3_ops): New function, fills in m3_ops.
170 (_initialize_m3): Use it.
171
172 1999-01-18 Fernando Nasser <fnasser@totem.to.cygnus.com>
173
174 * sol-thread.c: delete compile time initialization of target_ops
175 (_initialize_sol_thread): initialize target_ops at run time.
176 * hpux-thread.c: added target_ops entry.
177 * m3-nat.c: ditto.
178
179 Mon Jan 18 15:19:13 1999 David Taylor <taylor@texas.cygnus.com>
180
181 * procfs.c (procfs_ops): delete compile time initialization.
182 (_initialize_procfs): initialize procfs_ops at run time.
183
184 Mon Jan 18 12:51:44 1999 Christopher Faylor <cgf@cygnus.com>
185
186 * configure.in: Ensure that -luser32 is always linked in
187 for cygwin build.
188 * configure: Regenerated.
189
190 Mon Jan 18 08:38:05 1999 Mark Alexander <marka@cygnus.com>
191
192 * values.c (value_virtual_fn_field): Clear the pointed-to
193 offset when casting to the base class.
194
195 Mon Jan 18 10:30:51 1999 David Taylor <taylor@texas.cygnus.com>
196
197 * remote-udi.c (init_udi_ops): change non-existant udi_run_ops to
198 udi_ops; delete NULL initializers.
199
200 Mon Jan 18 12:03:47 1999 Andrew Cagney <cagney@b1.cygnus.com>
201
202 * serial.c (serial_close): gdb_fclose tages gdb_file** arg, not
203 gdb_file*.
204
205 * f-valprint.c, target.c, gdbarch.c: Pass gdb_stderr not stderr.
206
207 Mon Jan 18 10:46:12 1999 Andrew Cagney <cagney@b1.cygnus.com>
208
209 * stack.c (print_frame_info_base): Don't cast call to
210 catch_errors.
211 (print_args_stub): Change char* arg to PTR.
212 * symmisc.c (print_symbol): Ditto.
213 * top.c (quit_cover): Ditto.
214 * remote.c (remote_open_1, remote_start_remote): Ditto.
215 * infrun.c (normal_stop, hook_stop_stub, restore_selected_frame):
216 Ditto.
217
218 * stack.c (backtrace_command): Cast first arg of make_cleanup to
219 make_cleanup_func.
220 * remote.c (remote_kill): Cast putpkt arg to catch_errors_ftype.
221
222 Mon Jan 18 08:47:02 1999 Andrew Cagney <cagney@b1.cygnus.com>
223
224 * defs.h (catch_errors_ftype): Define.
225 (catch_errors): Replace char* arg with PTR arg.
226 * top.c (catch_errors): Update
227
228 * breakpoint.c (bpstat_stop_status, bpstat_stop_status,
229 delete_breakpoint, breakpoint_re_set): Delete all casts in call to
230 catch_errors.
231 (breakpoint_cond_eval, watchpoint_check,
232 cover_target_enable_exception_callback, breakpoint_re_set_one):
233 Arg is PTR not char*.
234
235 * breakpoint.c (cover_target_enable_exception_callback): Change
236 type to int. Check for cast values of 0 and -1. Return a result!
237 (insert_breakpoints): Move declaration of SAL and ARGS to where
238 they are used.
239
240 1999-01-16 Fernando Nasser <fnasser@totem.to.cygnus.com>
241
242 * remote.c (remote_query): new function - creates proper interface
243 to the remote protocol "q" command.
244
245 Fri Jan 15 17:11:48 EST 1999 Zdenek Radouch (radouch@cygnus.com)
246
247 * config/fr30/tm-fr30.h: Changed ABI to match GCC change
248 (always use pointer for structs passed by value).
249
250 1999-01-15 Fernando Nasser <fnasser@totem.to.cygnus.com>
251
252 * target.h: added entry for target queries (to_query)
253 target.c: ditto.
254
255 Thu Jan 14 18:29:17 1999 David Taylor <taylor@texas.cygnus.com>
256
257 start-sanitize-carp start-sanitize-vr4xxx
258 * mips-tdep.c (mips_gdbarch_init): fix stream arg in
259 fprintf_unfiltered calls.
260 end-sanitize-carp end-sanitize-vr4xxx
261 * remote-mm.c (mm_wait): fix stream arg to gdb_flush.
262 * remote-udi.c (udi_wait): fix stream arg to fwrite.
263 * symmisc.c (maintenance_check_symtabs): fix stream argument to
264 print_address_numeric.
265
266 Wed Jan 13 19:33:16 1999 David Taylor <taylor@texas.cygnus.com>
267
268 * breakpoint.c (insert_breakpoints): insert cast to eliminate
269 warning.
270
271 Wed Jan 13 14:59:02 1999 Michael Snyder <msnyder@cleaver.cygnus.com>
272
273 * infrun.c (set/show scheduler-locking) New command. Set a
274 mode bit that will control how GDB attempts to control thread
275 scheduling for step, continue, etc. (resume): make use of
276 the schedule-locking mode.
277 * target.h (struct target_ops): new field to_has_thread_control.
278 * sol-thread.c: initialize target_ops to_has_thread_control.
279 * procfs.c: ditto.
280 * target.c: ditto.
281 * m3-nat.c: ditto.
282 * remote.c: ditto.
283 * hpux-thread.c: ditto.
284 * thread.c: cull duplicate prototypes. Move prototypes to top.
285 * serial.c: indentation cleanup.
286 * breakpoint.c: add casts to eliminate compiler warnings.
287
288 Tue Jan 12 17:00:00 1999 Edith Epstein <eepstein@sophia.cygnus.com>
289
290 * inftarg.c (child_create_inferior): fixed HPUXHPPA specific
291 call to fork_inferior. The shell param is now NULL.
292
293 1999-01-12 Jason Molenda (jsm@bugshack.cygnus.com)
294
295 * monitor.c (init_base_monitor_ops): Whitespace cleanup.
296 (_initialize_remote_monitors): Same.
297
298 1999-01-12 Jason Molenda (jsm@bugshack.cygnus.com)
299
300 * monitor.c (init_monitor_ops): Initialize the monitor_ops
301 structure if it hasn't already been done.
302
303 Tue Jan 12 14:50:10 1999 Stan Shebs <shebs@andros.cygnus.com>
304
305 * inftarg.c (child_ops): Don't initialize statically.
306 (init_child_ops): New function, fills in child_ops.
307 (_initialize_inftarg): Use it.
308 (child_post_attach): Declare extern.
309 (child_wait): Fix ambiguous parens.
310 (child_attach_to_process): Remove unused local wstatus.
311 (child_insert_fork_catchpoint, child_remove_fork_catchpoint,
312 child_insert_vfork_catchpoint, child_remove_vfork_catchpoint,
313 child_has_forked, child_insert_exec_catchpoint,
314 child_remove_exec_catchpoint): Return a value.
315
316 Mon Jan 11 16:43:44 1999 Michael Snyder <msnyder@cleaver.cygnus.com>
317
318 * remote.c (remote_wait): Add inferior_pid to thread list only
319 if it is not already there.
320
321 1999-01-11 Jason Molenda (jsm@bugshack.cygnus.com)
322
323 * scm-tags.h: Update FSF's address on copyright notice.
324 * ser-e7kpc.c: Same.
325 * gnu-nat.h: Same.
326
327 Mon Jan 11 13:45:57 1999 Stu Grossman <grossman@babylon-5.cygnus.com>
328
329 * dwarf2read.c (dump_die): Change stderr to gdb_stderr.
330 * expprint.c (print_subexp): fprintf => fprintf_unfiltered.
331 * jv-typeprint.c (java_type_print_base): fputs => fputs_filtered.
332 * stack.c (struct function_bounds): Remove superfluous `typedef'.
333 * symfile.c (list_overlays_command): stdout => gdb_stdout.
334 * symmisc.c (maintenance_check_symtabs): stdout => gdb_stdout.
335 * utils.c (print_spaces): Make more efficient.
336
337 Mon Jan 11 13:55:51 1999 David Taylor <taylor@texas.cygnus.com>
338
339 * utils (print_spaces): fix arg to strcat; fix formatting.
340
341 Fri Jan 8 11:57:24 1999 Stan Shebs <shebs@andros.cygnus.com>
342
343 * exec.c (exec_ops): Don't initialize statically.
344 (init_exec_ops): New function, fills in exec_ops.
345 (_initialize_exec): Use it.
346
347 Thu Jan 7 17:50:15 EST 1999 Zdenek Radouch (radouch@cygnus.com)
348
349 Beta FR30 port.
350 * fr30-tdep.c
351 * config/fr30/tm-fr30.h
352
353 Wed Jan 6 12:28:35 1999 David Taylor <taylor@texas.cygnus.com>
354
355 * configure.in: Add an --enable-tui argument. Construct
356 tui/Makefile from tui/Makefile.in. Use AM_PROG_CC_STDC. If we
357 have the GUI, then we need this to process libgui.h.
358 (ENABLE_CFLAGS): define and export BUILD_TUI.
359 (AC_CHECK_HEADERS): Add check for term.h.
360
361 * configure.host (hppa-*-hpux10.20, hppa-*-hpux11.0*): New configs.
362
363 * config.in, configure : regenerated.
364
365 * Makefile.in: Allow the TUI code to be conditionally enabled.
366 (TUI_LIBRARY): New variable, value are set by the configuration
367 script. Set to the empty string when the TUI isn't enabled.
368 (gdb$(GDBEXT)): Use those, instead of referring to all-tui and
369 tui/libtui.a directly.
370 (BUILD_TUI): build the tui -- only when configured with
371 --enable-tui.
372 (YLWRAP): use ylwrap to avoid problems on systems w/o bison.
373 (gdb$(EXEEXT)): make it dependent on BUILD_TUI.
374 (all-tui): remove dependency from phony target.
375 (c-exp.tab.c): use ylwrap instead of bison.
376 (jv-exp.tab.c): ditto.
377 (f-exp.tab.c): ditto.
378 (m2-exp.tab.c): ditto.
379 (ALLDEPFILES): add somread.c, hp-psymtab-read.c, hp-symtab-read.c.
380 (SFILES): remove the above files
381 (COMMON_OBS): remove somread.o
382 (SFILES): Add the tui files to this, so they get included in etags
383 tables.
384 (gdb$(EXEEXT)): Add all-tui to the list of dependencies, and add
385 tui/libtui.a to the link list.
386 (all-tui): New rule, which does a recursive make in the tui
387 subdir.
388 (tui/libtui.a): When recursing, pass down ${FLAGS_TO_PASS}. And
389 don't echo the make command. This is closer to what the other
390 recursions do.
391 (HFILES_NO_SRCDIR): add hpread.h
392 (COMMON_OBS): add hp-psymtab-read.o, hp-symtab-read.o
393 (SFILES): add hp-psymtab-read.c, hp-symtab-read.c add rules for
394 the new files. Remove hpread.c, hpread.o
395 (gdb$(EXEEXT)): Depend on the actual tui library, not on a
396 fictitious target. Since the fictitious target never existed,
397 make would always relink.
398 (tui/libtui.a): Always recurse to make sure the library is up to
399 date.
400
401 Wed Jan 6 12:05:12 1999 Stan Shebs <shebs@andros.cygnus.com>
402
403 * remote.c: Pacify --enable-build-warnings, reformat code
404 to conform to standards, fix spelling errors.
405 (ishex, stubhex, record_currthread, etc): Declare.
406 (ishex, stubhex): Declare char arg as int.
407 (pack_string): Comment out, never used but possibly useful.
408 (threadref_to_int, remote_get_threadinfo, etc): Make static.
409
410 Wed Jan 6 11:43:32 1999 David Taylor <taylor@texas.cygnus.com>
411
412 The following changes were made by Elena Zannoni
413 <ezannoni@cygnus.com> and Edith Epstein <eepstein@cygnus.com> as
414 part of a project to merge in changes made by HP.
415
416 * c-exp.y: use external flag hp_som_som_object_present to decide
417 whether code was compiled by HP's compilers. Add two new C++
418 tokens for true and false.
419 (yylex): check for template name is done differently for the
420 HP/aCC compiler case. Change some of the template processing code
421 for handling HP aCC templates. Handle true and false tokens.
422
423 Tue Jan 5 11:13:36 1999 Michael Snyder <msnyder@cleaver.cygnus.com>
424
425 * remote.c (record_curthread): Must not modify inferior_pid when
426 called from wait_for_inferior. Instead, if a new thread-id is
427 detected, call add_thread.
428 (MAGIC_NULL_PID): new macro, use instead of the magic number
429 "42000".
430 (remote_find_new_threads): if inferior_pid is unknown, get and use
431 the current thread id.
432 (remote_start_remote): on connecting, attempt to get the current
433 thread id for inferior_pid.
434 (remote_resume): If pid == -1, then resume any-thread (not the
435 current thread specifically). Also some cosmetic fixups.
436
437 * thread.c (info_threads_command): don't initialize current_pid
438 until after call to FIND_NEW_THREADS (which may change inferior_pid).
439 Also some cosmetic fixups.
440 * infrun.c: cosmetic fixups and casts to avoid warnings.
441 * infcmd.c: cosmetic fixups, mainly long lines.
442
443 Tue Jan 5 11:55:57 1999 David Taylor <taylor@texas.cygnus.com>
444
445 * target.c (noprocess): terminate sentence with a period.
446 * breakpoint.c (catch_command_1): ditto.
447
448 * c-valprint.c (c_value_print): remove hack^2 from HP; it causes
449 testsuite losses with no real gain.
450
451 * inferior.h (START_INFERIOR_TRAPS_EXPECTED): restore, but only
452 if tm-*.h hasn't overridden default value.
453
454 1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
455
456 * configure.in: Fix whitespace indentation for --help.
457 * configure: Regenerated.
458
459 1999-01-04 Manuel Bouyer <bouyer@antioche.lip6.fr>
460
461 * main.c: Add --write command line option, document -w.
462 * gdb.1: Document --write.
463
464 1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
465
466 * configure.in: Require autoconf 2.12.1 or higher.
467 * doc/configure.in: Ditto.
468 * nlm/configure.in: Ditto.
469 * rdi-share/configure.in: Ditto.
470 * testsuite/configure.in: Ditto.
471 * doc/Makefile.in: Don't hardcode $(SHELL).
472 * nlm/Makefile.in: Ditto.
473 * rdi-share/Makefile.in: Ditto.
474 * testsuite/Makefile.in: Ditto.
475
476 Mon Jan 4 12:53:03 1999 Stan Shebs <shebs@andros.cygnus.com>
477
478 * remote-vx.c (init_vx_ops, init_vx_run_ops): Remove unneeded
479 inits of new fields, including ref to bogus field.
480 (vx_ops, vx_run_ops): Make static.
481
482 Mon Jan 4 15:05:29 1999 David Taylor <taylor@texas.cygnus.com>
483
484 * inferior.h (START_INFERIOR_TRAPS_EXPECTED): delete,
485 already defined in tm.h.
486
487 * inftarg.c: change <sys/unistd.h> to <unistd.h> and
488 conditionalize its inclusion.
489 * infttrace.c: ditto.
490
491 For older changes see ChangeLog-98
492 \f
493 Local Variables:
494 mode: change-log
495 left-margin: 8
496 fill-column: 74
497 version-control: never
498 End:
This page took 0.039086 seconds and 4 git commands to generate.