gdb/ChangeLog

   1 2009-02-06  Pedro Alves  <pedro@codesourcery.com>
   2
   3         * target.h (enum target_object): Add new TARGET_OBJECT_SIGNAL_INFO.
   4         * infrun.c (siginfo_value_read, siginfo_value_write): New.
   5         (siginfo_value_funcs): New.
   6         (siginfo_make_value): New.
   7         (_initialize_infrun): Create the $_siginfo convenience variable.
   8         * gdbtypes.h (append_composite_type_field_aligned): Declare.
   9         * gdbtypes.c (append_composite_type_field): Rename to...
  10         (append_composite_type_field_aligned): ... this.  Add ALIGNMENT
  11         argument.  Handle it.
  12         (append_composite_type_field): Rewrite on top of
  13         append_composite_type_field_aligned.
  14         * value.h (internalvar_make_value): New typedef.
  15         (struct internalvar) <make_value>: New field.
  16         (create_internalvar_type_lazy): Declare.
  17         * value.c (create_internalvar): Clear make_value.
  18         (create_internalvar_type_lazy): New.
  19         (value_of_internalvar): If make_value is set use it.
  20         (preserve_values): Skip internal variables that don't have a
  21         value.
  22         * gdbarch.sh (get_siginfo_type): New.
  23         * gdbarch.h, gdbarch.c: Regenerate.
  24
  25         * linux-tdep.h, linux-tdep.c: New.
  26         * amd64-linux-tdep.c: Include "linux-tdep.h".
  27         (amd64_linux_init_abi): Register linux_get_siginfo_type and
  28         linux_get_siginfo_mapper.
  29         * i386-linux-tdep.c: Include "linux-tdep.h".
  30         (i386_linux_init_abi): Register linux_get_siginfo_type and
  31         linux_get_siginfo_mapper.
  32         * arm-linux-tdep.c: Include "linux-tdep.h".
  33         (i386_linux_init_abi): Register linux_get_siginfo_type and
  34         linux_get_siginfo_mapper.
  35
  36         * linux-nat.c (linux_xfer_siginfo): New.
  37         (linux_nat_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO.
  38         * remote.c (PACKET_qXfer_siginfo_read)
  39         (PACKET_qXfer_siginfo_write): New.
  40         (feature remote_protocol_features): Add "qXfer:siginfo:read" and
  41         "qXfer:siginfo:write" features.
  42         (remote_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO.
  43         (_initialize_remote): Add "set/show remote read-siginfo-object"
  44         and "set/show remote write-siginfo-object" commands.
  45
  46         * Makefile.in (ALL_TARGET_OBS): Add linux-tdep.o.
  47         (HFILES_NO_SRCDIR): Add linux-tdep.h.
  48         (ALLDEPFILES): Add linux-tdep.c.
  49
  50         * configure.tgt (arm*-*-linux* | arm*-*-uclinux*)
  51         (i[34567]86-*-linux*, x86_64-*-linux*): Add linux-tdep.o to
  52         gdb_target_obs.
  53
  54 2009-02-06  Jim Blandy  <jimb@codesourcery.com>
  55             Daniel Jacobowitz  <dan@codesourcery.com>
  56             Vladimir Prus  <vladimir@codesourcery.com>
  57             Pedro Alves  <pedro@codesourcery.com>
  58
  59         * defs.h (enum lval_type): New value: lval_computed.
  60         * value.h (struct lval_funcs): New type.
  61         (allocate_computed_value, value_computed_funcs)
  62         (value_computed_closure): New declarations.
  63         * value.c (struct value): Add a structure to the location union
  64         for computed lvalues, containing 'funcs' and 'closure' members.
  65         (allocate_computed_value, value_computed_funcs)
  66         (value_computed_closure): New functions.
  67         (value_free): For computed lvalues, call the closure's
  68         'free_closure' function before freeing the value itself.
  69         (value_copy): If we're copying an lval_computed value, call the
  70         closure's 'copy_closure' function.
  71         (set_value_component_location): If the original value is a
  72         computed lvalue, then call the closure's 'copy_closure' function.
  73         (value_of_internalvar): If an internal variable's value is a
  74         computed lvalue, make retrieving its value produce an equivalent
  75         computed lvalue.
  76         * valops.c (value_fetch_lazy): Unlazy computed lvalues by calling
  77         their read function.
  78         (value_assign): Assign to computed lvalues by calling their write
  79         function.
  80
  81 2009-02-06  Pedro Alves  <pedro@codesourcery.com>
  82
  83         * linux-nat.c (linux_nat_wait): Adjust.
  84         (linux_nat_pid_to_str): Adjust.  Remove call to thread_db_init.
  85         * linux-nat.h (thread_db_init): Delete declaration.
  86         * linux-thread-db.c (target_beneath): Delete.
  87         (thread_db_init): Delete.
  88         (thread_db_detach): Use find_target_beneath.
  89         (thread_db_wait): Adjust interface.  Use find_target_beneath.
  90         (thread_db_mourn_inferior): Use find_target_beneath.
  91         (thread_db_can_async_p, thread_db_is_async_p, thread_db_async)
  92         (thread_db_async_mask): Delete.
  93         (thread_db_pid_to_str): Adjust interface.  Use
  94         find_target_beneath.
  95         (thread_db_get_thread_local_address): Adjust interface.  Use
  96         find_target_beneath.
  97         (init_thread_db_ops): Delete references to delete functions.
  98         * target.c (update_current_target): Don't inherit or default
  99         to_wait.  Don't inherit to_pid_to_str and
 100         to_get_thread_local_address.
 101         (target_translate_tls_address): Look for a pushed target that
 102         implements to_get_thread_local_address, and use it instead of
 103         checking for target_get_thread_local_address_p.
 104         (target_wait, target_pid_to_str): Reimplement as functions.
 105         (dummy_pid_to_str): New.
 106         (init_dummy_target): Register it.
 107         (debug_to_wait): Delete.
 108         * target.h (struct target_ops): Make to_wait, to_pid_to_str and
 109         to_get_thread_local_address accept a pointer to struct target_ops.
 110         (target_wait): Delete macro, and declare as function.
 111         (target_pid_to_str): Likewise.
 112         (target_get_thread_local_address)
 113         (target_get_thread_local_address_p): Delete.
 114         (noprocess): Add NORETURN and ATTR_NORETURN tags.
 115         * inf-ptrace.c (inf_ptrace_wait): Adjust.
 116         (inf_ptrace_pid_to_str): New.
 117         (inf_ptrace_target): Use inf_ptrace_pid_to_str.
 118         * aix-thread.c (aix_thread_wait, aix_thread_pid_to_str): Adjust.
 119         * bsd-kvm.c (bsd_kvm_pid_to_str): Adjust.
 120         * bsd-uthread.c (bsd_uthread_wait, bsd_uthread_pid_to_str):
 121         Adjust.
 122         * corelow.c (core_pid_to_str): Adjust.
 123         * darwin-nat.c (darwin_wait, darwin_pid_to_str): Adjust.
 124         * dec-thread.c (dec_thread_wait, dec_thread_pid_to_str): Adjust.
 125         * gnu-nat.c (gnu_wait, gnu_pid_to_str): Adjust.
 126         * go32-nat.c (go32_wait, go32_pid_to_str): Adjust.
 127         * hpux-thread.c (hpux_thread_wait): Adjust.
 128         * inf-ttrace.c (inf_ttrace_wait, inf_ttrace_pid_to_str): Adjust.
 129         * monitor.c (monitor_wait, monitor_pid_to_str): Adjust.
 130         * nto-procfs.c (procfs_wait, procfs_pid_to_str): Adjust.
 131         * procfs.c (procfs_pid_to_str): Adjust.
 132         * remote-m32r-sdi.c (m32r_wait, m32r_pid_to_str): Adjust.
 133         * remote-mips.c (mips_wait): Adjust.
 134         * remote-sim.c (gdbsim_wait, gdbsim_pid_to_str): Adjust.
 135         * remote.c (remote_wait, remote_pid_to_str)
 136         (remote_get_thread_local_address): Adjust.
 137         * rs6000-nat.c (rs6000_wait): Adjust.
 138         * sol-thread.c (procfs_pid_to_str): Adjust declaration.
 139         (sol_thread_wait, solaris_pid_to_str): Adjust.
 140         * spu-linux-nat.c (spu_child_wait): Adjust.
 141         * windows-nat.c (windows_wait, windows_pid_to_str): Adjust.
 142
 143 2009-02-06  Tom Tromey  <tromey@redhat.com>
 144
 145         * Makefile.in (SUBDIR_PYTHON_OBS): Add python-cmd.o.
 146         (SUBDIR_PYTHON_SRCS): Add python-cmd.c.
 147         (python-cmd.o): New target.
 148         * cli/cli-decode.c (set_cmd_completer): Add self parameter to
 149         completer prototype.
 150         (add_cmd): Initialize destroyer member of cmd_list_element. Use
 151         make_symbol_completion_list_fn as completer.
 152         (delete_cmd): Call destroyer if one is set.
 153         * cli/cli-decode.h (cmd_list_element): Add cmd parameter to
 154         completer member.  Add destroyer member.
 155         (set_cmd_completer): Add self parameter to
 156         completer prototype.
 157         * command.h (set_cmd_completer): Add cmd parameter to
 158         completer prototype.
 159         * completer.c (noop_completer, filename_completer,
 160         location_completer, expression_completer, command_completer): Adapt
 161         to new completer prototype.
 162         (complete_line_internal): Pass new parameter to completer function.
 163         * completer.h (noop_completer, filename_completer,
 164         location_completer, expression_completer, command_completer): Adapt
 165         prototypes to new completer prototype.
 166         * interps.c (interpreter_completer): Adapt to new completer
 167         prototype.
 168         * python/python-cmd.c: New file.
 169         * python/python-internal.h (gdbpy_initialize_commands): Add
 170         prototype.
 171         (gdbpy_doc_cst): Add forward declaration.
 172         * python/python.c (gdbpy_doc_cst): Declare.
 173         (_initialize_python): Call gdbpy_initialize_commands.  Initialize
 174         gdbpy_doc_cst.
 175         * symtab.c (make_symbol_completion_list_fn): New function.
 176         * symtab.h (make_symbol_completion_list_fn): Add prototype.
 177
 178 2009-02-06  Pedro Alves  <pedro@codesourcery.com>
 179
 180         * target.c (target_get_osdata): Check for equal or higher than
 181         process_stratum, not dummy_stratum.
 182
 183 2009-02-06  Pedro Alves  <pedro@codesourcery.com>
 184
 185         * remote.c (extended_remote_can_run): Delete.
 186         (init_remote_ops): Don't register it.
 187         * target.c (target_get_osdata): Don't check for target_can_run.
 188         Instead any target that has already been pushed, otherwise
 189         fallback to the default run target.
 190
 191 2009-02-06  Pedro Alves  <pedro@codesourcery.com>
 192
 193         * target.c (target_create_inferior, target_detach)
 194         (target_mourn_inferior, target_attach, target_close): Do target
 195         debug output.
 196         (debug_to_attach, debug_to_detach, debug_to_create_inferior)
 197         (debug_to_mourn_inferior, debug_to_close): Delete.
 198         (setup_target_debug): Adjust.
 199
 200 2009-02-05  Pedro Alves  <pedro@codesourcery.com>
 201
 202         * target.h (target_stopped_data_address_p): Delete declaration,
 203         and don't define as macro.
 204         * target.c (target_stopped_data_address_p): Delete.
 205
 206 2009-02-05  Thiago Jung Bauermann  <bauerman@br.ibm.com>
 207             Tom Tromey  <tromey@redhat.com>
 208
 209         * python/python-utils.c (target_string_to_unicode): New function.
 210         * python/python-internal.h (target_string_to_unicode): New prototype.
 211         * python/python-value.c (valpy_string): New function.
 212         (value_object_methods): Add `string' entry.
 213
 214 2009-02-05  Pedro Alves  <pedro@codesourcery.com>
 215
 216         * target.h (target_tid_to_str): Delete.
 217         * thread.c (print_thread_info, thread_apply_all_command)
 218         (thread_apply_command, thread_command, do_captured_thread_select):
 219         Use target_pid_to_str instead of target_tid_to_str.
 220         * linux-fork.c (delete_fork_command): Likewise.
 221
 222 2009-02-05  Pedro Alves  <pedro@codesourcery.com>
 223
 224         * frame.c (has_stack_frames): Make public.
 225         (get_prev_frame): Don't allow a NULL this_frame anymore.
 226         * frame.h (has_stack_frames): Declare.
 227         * varobj.c (find_frame_addr_in_frame_chain): Don't ever pass NULL
 228         to get_prev_frame, instead start at get_current_frame.
 229         (varobj_create): Check has_stack_frames before getting any frame;
 230         eliminate one usage of deprecated_safe_get_selected_frame.
 231
 232 2009-02-05  Tom Tromey  <tromey@redhat.com>
 233             Thiago Jung Bauermann  <bauerman@br.ibm.com>
 234
 235         * python/python.c (GdbMethods): Move to bottom of file.
 236         (get_parameter, execute_gdb_command, gdbpy_write,
 237         gdbpy_flush): Remove forward declarations.
 238         (eval_python_from_control_command): Fix error checking of function
 239         PyRun_SimpleString.  Fix error string.
 240         (python_command): Likewise.
 241         (execute_gdb_command): Added from_tty argument.
 242
 243 2009-02-05  Thiago Jung Bauermann  <bauerman@br.ibm.com>
 244
 245         * language.h (language_dfn): Add la_get_string member.
 246         (LA_GET_STRING): New macro.
 247         (default_get_string): New prototype.
 248         * language.c (default_get_string): New function.
 249         (unknown_language_defn, auto_language_defn, local_language_defn): Use
 250         default_get_string for la_get_string.
 251         * c-lang.c (c_get_string): New function.
 252         (c_language_defn, cplus_language_defn, asm_language_defn): Use
 253         c_get_string for la_get_string.
 254         (minimal_language_defn): Likewise
 255         * ada-lang.c (ada_language_defn): Likewise.
 256         * f-lang.c (f_language_defn): Use default_get_string for
 257         la_get_string.
 258         * jv-lang.c (java_language_defn): Likewise.
 259         * m2-lang.c (m2_language_defn): Likewise.
 260         * objc-lang.c (objc_language_defn): Likewise.
 261         * p-lang.c (p_language_defn): Likewise.
 262         * scm-lang.c (scm_language_defn): Likewise.
 263         * typeprint.c (type_to_string): New function.
 264         * value.h (type_to_string): New prototype.
 265         * valprint.c (val_print_string): Factor out code for reading string
 266         from the inferior into its own function.  Put 2 spaces after period
 267         in comments.
 268         (read_string): New function.
 269         * valprint.h (read_string): New prototype.
 270
 271 2009-01-07  Pierre Muller  <muller@ics.u-strasbg.fr>
 272             Tom Tromey  <tromey@redhat.com>
 273
 274         PR breakpoints/8079:
 275         * breakpoint.c (print_one_breakpoint): Use exp_string field
 276         to display expression of watchpoints.
 277         (mention): Likewise.
 278         (watch_command_1): Remove trailing whitespace from expression.
 279         * printcmd.c (struct display) <exp_string>: New field.
 280         (display_command): Set exp_string.
 281         (free_display): Free exp_string.
 282         (clear_displays): Use free_display.
 283         (do_one_display): Print exp_string.
 284         (display_info): Likewise.
 285
 286 2009-02-04  Tom Tromey  <tromey@redhat.com>
 287             Thiago Jung Bauermann  <bauerman@br.ibm.com>
 288             Phil Muldoon  <pmuldoon@redhat.com>
 289
 290         * python/python-internal.h (gdbpy_get_value_from_history): Rename
 291         prototype to gdbpy_history.
 292         (gdbpy_is_string): Declare.
 293         (python_string_to_host_string): Declare.
 294         * python/python-utils.c (gdbpy_is_string): New function.
 295         (unicode_to_encoded_string): New function.
 296         (unicode_to_target_string): Use it.
 297         (python_string_to_host_string): New function.
 298         * python/python-value.c (valpy_address): New function.
 299         (convert_value_from_python): Use gdbpy_is_string.  Change to throw
 300         Python exception instead of a GDB exception on error.  Properly check
 301         Python booleans.
 302         (valpy_getitem): Convert field name to host string.  Handle array
 303         accesses.  Adapt to new behaviour of convert_value_from_python.
 304         (valpy_new): Adapt to new behaviour of convert_value_from_python.
 305         (enum valpy_opcode) <VALPY_LSH, VALPY_RSH, VALPY_BITAND,
 306         VALPY_BITXOR, VALPY_BITOR>: New constants.
 307         (valpy_binop): Update.  Adapt to new behaviour of
 308         convert_value_from_python.
 309         (valpy_invert): New function.
 310         (valpy_lsh): Likewise.
 311         (valpy_rsh): Likewise.
 312         (valpy_and): Likewise.
 313         (valpy_or): Likewise.
 314         (valpy_xor): Likewise.
 315         (valpy_richcompare): Call convert_value_from_python instead of doing
 316         conversions itself.
 317         (is_intlike, valpy_int, valpy_long, valpy_float): New functions.
 318         (gdbpy_get_value_from_history): Rename
 319         function to gdbpy_history.
 320         (gdbpy_initialize_values): Don't set tp_new.
 321         (value_object_type): Add valpy_new.
 322         (value_object_methods): Add `address' entry.
 323         (value_object_as_number): Update for new methods.
 324         * python/python.c (GdbMethods): Rename entry from
 325         `get_value_from_history' to `history'.
 326
 327 2009-02-04  Jerome Guitton  <guitton@adacore.com>
 328
 329         * ada-lang.c (ada_template_to_fixed_record_type_1): Check size
 330         of type to guard against a crash.
 331
 332 2009-02-04  Jerome Guitton  <guitton@adacore.com>
 333
 334         * value.c (value_from_contents_and_address): Always return
 335         a lval_memory value, even if address is null.
 336
 337 2009-02-04  Tristan Gingold  <gingold@adacore.com>
 338
 339         * i386-darwin-tdep.c (i386_darwin_sigcontext_addr): New function.
 340         (amd64_darwin_sigcontext_addr): Ditto.
 341         (darwin_dwarf_signal_frame_p): Ditto.
 342         (i386_darwin_init_abi): Handle signal frames, use the const for
 343         sc_num_regs.
 344         (x86_darwin_init_abi_64): Ditto.
 345
 346 2009-02-04  Tristan Gingold  <gingold@adacore.com>
 347
 348         * i386-tdep.c (i386_sigtramp_p): Make it public.
 349         * i386-tdep.h (i386_sigtramp_p): Declare.
 350
 351 2009-02-04  Tristan Gingold  <gingold@adacore.com>
 352
 353         * machoread.c (macho_symfile_read): Read minsymtab also from
 354         shared libraries.
 355         (macho_symfile_read): Try to read dwarf2 frame info from main
 356         object file, but not from OSO files.
 357         (macho_symfile_offsets): Update section names for latest BFD
 358         changes.
 359         * i386-darwin-tdep.c (i386_darwin_init_abi): Call set_solib_ops.
 360         (x86_darwin_init_abi_64): Ditto.
 361         * solib-darwin.c: New file.
 362         * solib-darwin.h: New file.
 363         * configure.tgt: Add solib.o solib-darwin.o for Darwin.
 364
 365 2009-02-04  Tristan Gingold  <gingold@adacore.com>
 366
 367         * solist.h (struct target_so_ops): Comment fallback behavior for
 368         operation same.
 369
 370 2009-02-03  Tom Tromey  <tromey@redhat.com>
 371
 372         * completer.c (add_struct_fields): Check type_name against NULL
 373         before use.
 374
 375 2009-02-03  Joel Brobecker  <brobecker@adacore.com>
 376
 377         * MAINTAINERS: Update Elena's email address.
 378
 379 2009-02-02  Joel Brobecker  <brobecker@adacore.com>
 380
 381         * breakpoint (update_watchpoint): Minor comment adjustment.
 382
 383 2009-02-02  Tom Tromey  <tromey@redhat.com>
 384
 385         PR gdb/9594:
 386         * completer.c (count_struct_fields): Count method names.
 387         (add_struct_fields): Add matching method names.
 388
 389 2009-02-02  Doug Evans  <dje@google.com>
 390
 391         * configure.ac (gdbkt): Check both no_tcl/no_tk first, before
 392         doing any further tcl/tk configury.  Don't configure gdbtk if
 393         tcl or tk check fails.
 394         * aclocal.m4: Regenerate.
 395         * configure: Regenerate.
 396
 397 2009-02-02  Tom Tromey  <tromey@redhat.com>
 398
 399         PR exp/9059:
 400         * valops.c (find_overload_match): Follow typedefs before taking
 401         address of object argument.
 402
 403 2009-02-01  Doug Evans  <dje@google.com>
 404
 405         * target.h (target_waitstatus_to_string): Declare.
 406         * target.c (target_waitstatus_to_string): New function.  Copied from
 407         debug_to_wait.  Add missing entries for TARGET_WAITKIND_SYSCALL_ENTRY,
 408         TARGET_WAITKIND_SYSCALL_RETURN, TARGET_WAITKIND_IGNORE,
 409         TARGET_WAITKIND_NO_HISTORY.
 410         (debug_to_wait): Call it.
 411         * infrun.c (wait_for_inferior): If debug_infrun, print result of
 412         target_wait.
 413         (fetch_inferior_event): Ditto.
 414
 415 2009-01-30  Tom Tromey  <tromey@redhat.com>
 416
 417         * Makefile.in (HFILES_NO_SRCDIR): Remove i386-cygwin-tdep.h.
 418
 419 2009-01-30  Vladimir Prus  <vladimir@codesourcery.com>
 420
 421         PR 8145.
 422         * thread.c (do_captured_list_thread_ids): Report the current
 423         thread id.
 424
 425 2009-01-30  Vladimir Prus  <vladimir@codesourcery.com>
 426
 427         * breakpoint.c (create_breakpoint, create_breakpoints)
 428         (break_command_really, set_breakpoint): New parameter enabled.
 429         (create_breakpoint, break_command_really): Make breakpoint
 430         disabled if so requested.
 431         * breakpoint.h (set_breakpoint): New parameter enabled.
 432         * mi/mi-cmd-break.c (mi_cmd_break_insert): Handle the -d option.
 433
 434 2009-01-28  Doug Evans  <dje@google.com>
 435
 436         * amd64-tdep.h (amd64_displaced_step_copy_insn): Declare.
 437         (amd64_displaced_step_fixup): Declare.
 438         * amd64-tdep.c: #include opcode/i386.h, dis-asm.h.
 439         (amd64_arch_regmap): Move out of amd64_analyze_stack_align
 440         and make static global.
 441         (amd64_arch_regmap_len): New static global.
 442         (amd64_arch_reg_to_regnum): New function.
 443         (struct amd64_insn): New struct.
 444         (struct displaced_step_closure): New struct.
 445         (onebyte_has_modrm,twobyte_has_modrm): New static globals.
 446         (rex_prefix_p,skip_prefixes)
 447         (amd64_insn_length_fprintf,amd64_insn_length_init_dis)
 448         (amd64_insn_length,amd64_get_unused_input_int_reg)
 449         (amd64_get_insn_details,fixup_riprel,fixup_displaced_copy)
 450         (amd64_displaced_step_copy_insn)
 451         (amd64_absolute_jmp_p,amd64_absolute_call_p,amd64_ret_p)
 452         (amd64_call_p,amd64_breakpoint_p,amd64_syscall_p)
 453         (amd64_displaced_step_fixup): New functions.
 454         * amd64-linux-tdep.c: #include arch-utils.h.
 455         (amd64_linux_init_abi): Install displaced stepping support.
 456
 457 2009-01-28  Daniel Jacobowitz  <dan@codesourcery.com>
 458             Jerome Guitton  <guitton@adacore.com>
 459
 460         * configure, config.in: Regenerated.
 461         * configure.ac: Add --with-system-gdbinit.
 462         * main.c (get_init_files): New.
 463         (captured_main): Use get_init_files.  Load system gdbinit before
 464         $HOME/.gdbinit.
 465         (print_gdb_help): Print location of init files.
 466
 467 2009-01-28  Pedro Alves  <pedro@codesourcery.com>
 468
 469         * corefile.c (generic_search): Delete disabled code.
 470         * gdbcore.h (generic_search): Delete declaration.
 471
 472 2009-01-26  Pedro Alves  <pedro@codesourcery.com>
 473
 474         * linux-nat.c (linux_child_follow_fork): Copy attach_flag from the
 475         parent to the child.
 476         * inf-ttrace.c (inf_ttrace_follow_fork): Likewise.
 477         * inf-ptrace.c (inf_ptrace_follow_fork): Likewise.  Use
 478         remove_breakpoints to remove breakpoints from the parent.
 479
 480 2009-01-26  Pedro Alves  <pedro@codesourcery.com>
 481
 482         PR backtrace/9458, PR backtrace/8864:
 483         * frame.c (create_new_frame): Update the frame's cached PC before
 484         finding its unwinder.  Use frame_id_build to build the new frame's
 485         id.
 486         * stack.c (parse_frame_specification_1): Correct setting ``addrs''
 487         array values from the ``args'' array values.
 488
 489 2009-01-26  Pedro Alves  <pedro@codesourcery.com>
 490
 491         * gdbtypes.c (alloc_type, alloc_type_instance, create_range_type)
 492         (create_array_type, create_set_type, init_flags_type)
 493         (copy_type_recursive): Replace pairs of calls to XALLOC and memset
 494         with a call to XZALLOC or XCALLOC, and pairs of calls to
 495         obstack_alloc and memset with a call to OBSTACK_ZALLOC.
 496
 497 2009-01-26  Pedro Alves  <pedro@codesourcery.com>
 498
 499         Add "maint set|show internal-error|internal-warning quit|corefile
 500         ask|yes|no" commands.
 501
 502         PR gdb/7580:
 503         * utils.c (internal_problem_ask, internal_problem_yes)
 504         (internal_problem_no, internal_problem_modes): New.
 505         (struct internal_problem): Remove FIXME.  Make should_quit and
 506         should_dump_core types to char *.
 507         (internal_vproblem, internal_error_problem)
 508         (internal_warning_problem): Adjust.
 509         (set_internal_problem_cmd, show_internal_problem_cmd): New dummy
 510         functions.
 511         (add_internal_problem_command): New.
 512         (_initialize_utils): New.
 513
 514 2009-01-25  Pedro Alves  <pedro@codesourcery.com>
 515
 516         * infcmd.c (program_info): Use paddress instead of casting stop_pc
 517         to unsigned long.
 518
 519 2009-01-24  Pedro Alves  <pedro@codesourcery.com>
 520
 521         * infrun.c (normal_stop): Don't call
 522         deprecated_update_frame_pc_hack.
 523         * frame.c (deprecated_update_frame_pc_hack)
 524         (deprecated_update_frame_base_hack): Delete, and ...
 525         (create_new_frame): ... inline here.
 526         * frame.h (deprecated_update_frame_pc_hack)
 527         (deprecated_update_frame_base_hack): Delete declarations.
 528
 529 2009-01-23  Pedro Alves  <pedro@codesourcery.com>
 530
 531         * cli/cli-decode.c (add_setshow_zuinteger_cmd): New.
 532         * cli/cli-setshow.c (do_setshow_command): Handle it.
 533         * command.h (enum var_types): Add var_zuinteger.
 534         (add_setshow_zuinteger_cmd): Declare.
 535
 536         * valprint.c (_initialize_valprint): Change the set input-radix
 537         and set output-radix commands to zuinteger type.
 538
 539 2009-01-23  Pedro Alves  <pedro@codesourcery.com>
 540
 541         PR gdb/9664:
 542         * infrun.c (normal_stop): Tag threads as stopped, and run the
 543         hook-stop before printing the stack frame.
 544
 545 2009-01-22  Pedro Alves  <pedro@codesourcery.com>
 546
 547         PR c++/9631:
 548         * gnu-v3-abi.c (gnuv3_baseclass_offset): Call check_typedef on
 549         vbasetype.
 550
 551 2009-01-20  Kazu Hirata  <kazu@codesourcery.com>
 552
 553         * gdb/procfs.c (info_mappings_callback): Cast map->pr_size to
 554         unsigned long.
 555
 556 2009-01-20  Daniel Jacobowitz  <dan@codesourcery.com>
 557
 558         PR gdb/9346
 559         * infcmd.c (signal_command): Do not specify a resume PC.
 560
 561 2009-01-19  Doug Evans  <dje@google.com>
 562
 563         * dummy-frame.c (dummy_frame): Replace regcache member with
 564         caller_state.
 565         (dummy_frame_push): Replace caller_regcache arg with caller_state.
 566         All callers updated.
 567         (remove_dummy_frame,pop_dummy_frame,lookup_dummy_frame): New fns.
 568         (dummy_frame_pop): Rewrite.  Verify requested frame is in the
 569         dummy frame stack.  Restore program state.
 570         (cleanup_dummy_frames): Rewrite.
 571         (dummy_frame_sniffer): Update.  Make static.
 572         * dummy-frame.h (regcache,frame_info): Delete forward decls.
 573         (inferior_thread_state): New forward decl.
 574         (dummy_frame_push): Update prototype.
 575         * frame.c (frame_pop): dummy_frame_pop now does all the work for
 576         DUMMY_FRAMEs.
 577         * infcall.c (breakpoint_auto_delete_contents): Delete.
 578         (get_function_name,run_inferior_call): New fns.
 579         (call_function_by_hand): Simplify by moving some code to
 580         get_function_name, run_inferior_call.  Inferior function call wrapped
 581         in TRY_CATCH so there's less need for cleanups and all exits from
 582         proceed are handled similarily.  Detect program exit.
 583         Detect program stopping in a different thread.
 584         Make error messages more consistent.
 585         * inferior.h (inferior_thread_state): Declare (opaque type).
 586         (save_inferior_thread_state,restore_inferior_thread_state,
 587         make_cleanup_restore_inferior_thread_state,
 588         discard_inferior_thread_state, get_inferior_thread_state_regcache):
 589         Declare.
 590         (save_inferior_status): Update prototype.
 591         * infrun.c: (normal_stop): When stopped for the completion of an
 592         inferior function call, verify the expected stack frame kind.
 593         (inferior_thread_state): New struct.
 594         (save_inferior_thread_state,restore_inferior_thread_state,
 595         do_restore_inferior_thread_state_cleanup,
 596         make_cleanup_restore_inferior_thread_state,
 597         discard_inferior_thread_state,
 598         get_inferior_thread_state_regcache): New functions.
 599         (inferior_status): Move stop_signal, stop_pc, registers to
 600         inferior_thread_state.  Remove restore_stack_info.
 601         (save_inferior_status): Remove arg restore_stack_info.
 602         All callers updated.  Remove saving of state now saved by
 603         save_inferior_thread_state.
 604         (restore_inferior_status): Remove restoration of state now done by
 605         restore_inferior_thread_state.
 606         (discard_inferior_status): Remove freeing of registers, now done by
 607         discard_inferior_thread_state.
 608
 609 2009-01-18  Pedro Alves  <pedro@codesourcery.com>
 610
 611         * tui/tui-disasm.c (tui_vertical_disassem_scroll): Scroll one line
 612         at a time, times NUM_TO_SCROLL.
 613         * tui/tui-winsource.c (tui_horizontal_source_scroll): Don't try to
 614         fetch the selected frame if there is no stack.
 615
 616 2009-01-18  Pedro Alves  <pedro@codesourcery.com>
 617
 618         PR gdb/9747:
 619         * gdbthread.h (finish_thread_state, finish_thread_state_cleanup):
 620         Declare.
 621         * thread.c (finish_thread_state, finish_thread_state_cleanup): New.
 622         * infrun.c (wait_for_inferior, fetch_inferior_event): If an error
 623         is thrown while handling an event, finish the thread state.
 624         (normal_stop): Use finish_thread_state cleanup.
 625         * infcmd.c (run_command_1): If an error is thrown while starting
 626         the inferior, finish the thread state.
 627
 628 2009-01-18  Pedro Alves  <pedro@codesourcery.com>
 629
 630         * tui/tui-winsource.c (tui_update_breakpoint_info): In asm layout,
 631         skip breakpoints without a location (pending breakpoints).
 632
 633 2009-01-18  Pedro Alves  <pedro@codesourcery.com>
 634
 635         PR build/9186:
 636         * hppa-hpux-tdep.c (hppa_hpux_write_pc): Remove 'return'.
 637
 638 2009-01-18  Nick Roberts  <nickrob@snap.net.nz>
 639
 640         * thread.c (thread_command): Move call to annotate_thread_changed
 641         to...
 642         (do_captured_thread_select): ... here, to avoid printing an
 643         annotation if the thread change generates an exception.
 644
 645 2009-01-16  Joel Brobecker  <brobecker@adacore.com>
 646
 647         * NEWS: Document x86_64/MinGW as a new native configuration.
 648
 649 2009-01-16  Joel Brobecker  <brobecker@adacore.com>
 650
 651         * NEWS: Move the documentation of "info os processes" to
 652         the appropriate section (documenting the new commands).
 653
 654 2009-01-15  Doug Evans  <dje@google.com>
 655
 656         * target.h (target_signal_to_string): Make return type const char *.
 657         (target_signal_to_name): Ditto.
 658         (target_signal_from_name): Make arg const char *.
 659         * infrun.c (sig_print_info): Update.
 660         * signals/signals.c (signals): Make array and struct members const.
 661         (target_signal_to_string): Make return type const char *.
 662         (target_signal_to_name): Ditto.
 663         (target_signal_from_name): Make arg const char *.
 664
 665 2009-01-15  Ulrich Weigand  <uweigand@de.ibm.com>
 666             Tristan Gingold  <gingold@adacore.com>
 667
 668         * solist.h (struct target_so_ops): New member bfd_open.
 669         (solib_find): Add prototype.
 670         (solib_bfd_fopen): Add prototype.
 671         * solib.c (solib_find, solib_bfd_fopen): New functions, extracted
 672         from solib_bfd_open.
 673         (solib_bfd_open): Use ops->bfd_open override if present.  Call
 674         solib_find and solib_bfd_open otherwise.
 675
 676         * objfiles.h (OBJF_KEEPBFD): New define.
 677         * objfiles.c (free_objfile): Do not close BFD if OBJF_KEEPBFD
 678         objfile flag is set.
 679         * solib.c (symbol_add_stub): Do not allocate second BFD for
 680         shared library; use OBJF_KEEPBFD flag on solib objfile.
 681
 682 2009-01-15  Ulrich Weigand  <uweigand@de.ibm.com>
 683
 684         * frame.c (get_frame_arch): Abort if called with NULL this_frame.
 685
 686 2009-01-15  Ulrich Weigand  <uweigand@de.ibm.com>
 687
 688         * value.h (address_of_variable): Add prototype.
 689         (locate_var_value): Remove prototype.
 690
 691         * findvar.c (read_var_value): Do not attempt to default frame
 692         to selected frame.
 693         (locate_var_value): Remove function.
 694         * valops.c (value_of_variable): Retrieve selected frame for
 695         symbols that require a frame when called with NULL block.
 696         * valops.c (address_of_variable): New function.
 697
 698         * eval.c (evaluate_subexp_for_address): Call address_of_variable
 699         instead of calling locate_var_value.
 700         (evaluate_subexp_with_coercion): Likewise.
 701
 702 2009-01-14  Daniel Jacobowitz  <dan@codesourcery.com>
 703
 704         * NEWS: Document "define" for prefixed commands.
 705         * cli/cli-cmds.c (show_user): Update calls to show_user_1.  Call
 706         show_user_1 for prefix commands.
 707         * cli/cli-decode.c (help_cmd_list): Recurse for "help user-defined".
 708         * cli/cli-script.c (validate_comname): Rewrite to handle prefix
 709         commands.  Return the containing command list.
 710         (define_command, document_command): Update to handle prefix commands.
 711         (show_user_1): Add prefix and name arguments.  Handle prefix
 712         commands.
 713         * cli/cli-script.h (show_user_1): Update prototype.
 714
 715 2009-01-14  Kai Tietz  <kai.tietz@onevision.com>
 716
 717         * mingw-ser.c (console_select_thread): Add return to make
 718         compiler happy.
 719         (pipe_select_thread): Likewise.
 720         (file_select_thread): Likewise.
 721
 722 2009-01-14  Pedro Alves  <pedro@codesourcery.com>
 723
 724         * mi/mi-main.c (mi_cmd_execute): Clean up parenthesis mess from
 725         previous change.
 726
 727 2009-01-14  Pedro Alves  <pedro@codesourcery.com>
 728
 729         * remote.c (extended_remote_mourn_1): Invalidate our notion of
 730         current general thread.
 731
 732 2009-01-14  Pedro Alves  <pedro@codesourcery.com>
 733
 734         * mi/mi-main.c (mi_cmd_execute): Also allow -list-thread-groups
 735         without a live selected thread.
 736
 737 2009-01-14  Joel Brobecker  <brobecker@adacore.com>
 738
 739         Update the copyright notice of some of the files I missed
 740         in the previous copyright update.
 741
 742 2009-01-14  Joel Brobecker  <brobecker@adacore.com>
 743
 744         * windows-nat.c (handle_unload_dll): Use %p to print the DLL
 745         base address instead of casting it to DWORD.
 746
 747 2009-01-13  Ulrich Weigand  <uweigand@de.ibm.com>
 748
 749         * dwarf2loc.c (dwarf2_evaluate_loc_desc): Do not call get_frame_arch
 750         for NULL frame pointers.
 751
 752 2009-01-13  Mark Kettenis  <kettenis@gnu.org>
 753
 754         * utils.c (host_address_to_string): Reimplement in a way that
 755         avoids the cast of the address to long.
 756
 757 2009-01-13  Joel Brobecker  <brobecker@adacore.com>
 758
 759         * mdebugread.c (parse_symbol): Save the symbol private data
 760         using SYMBOL_VALUE_BYTES instead of SYMBOL_VALUE.
 761         (psymtab_to_symtab_1): Likewise.
 762         (parse_procedure): Declare variable "e" only in the scope
 763         where it is used. Extract the symbol private data using
 764         SYMBOL_VALUE_BYTES.
 765
 766 2009-01-13  Jim Blandy  <jimb@codesourcery.com>
 767
 768         Abstract out common code for copying value locations.
 769
 770         * value.h (set_value_component_location): New declaration.
 771         * value.c (set_value_component_location): New function.
 772         (value_primitive_field): Use it.
 773         * valarith.c (value_subscript, value_subscripted_rvalue): Same.
 774         * valops.c (search_struct_field, value_slice): Same.
 775         * ada-lang.c (coerce_unspec_val_to_type)
 776         (ada_value_primitive_packed_val): Same.
 777
 778 2009-01-13  Joel Brobecker  <brobecker@adacore.com>
 779
 780         * MAINTAINERS (GLOBAL MAINTAINERS): Add Tom Tromey.
 781
 782 2009-01-12  Christopher Faylor  <me+cygwin@cgf.cx>
 783
 784         * amd64-windows-nat.c Rename gdb-specific win32_* to windows_*
 785         throughout.
 786         * i386-cygwin-tdep.c: Ditto.
 787         * i386-windows-nat.c: Ditto.
 788         * windows-nat.h: Ditto.
 789         * windows-tdep.c: Ditto.
 790         * windows-tdep.h: Ditto.
 791         * windows-nat.c: Ditto.
 792         (cygwin_load_start): Redefine as CORE_ADDR.
 793         (cygwin_load_end): Ditto.
 794         (windows_make_so): Coerce result of address arithmetic to to uintptr_t
 795         before coercing to CORE_ADDR to avoid a compiler warning.
 796         (handle_exception): Define addr as CORE_ADDR and coerce
 797         ExceptionAddress to uintptr_t before assigining to avoid a compiler
 798         warning.
 799         * config/djgpp/fnchange.lst: Add mappings for recently renamed windows
 800         files.
 801
 802 2009-01-11  Jan Kratochvil  <jan.kratochvil@redhat.com>
 803
 804         Fix linking with --enable-targets=all:
 805         * Makefile.in (ALL_TARGET_OBS): Add windows-tdep.o.
 806         (HFILES_NO_SRCDIR): Add windows-tdep.h.
 807         (ALLDEPFILES): Add windows-tdep.c.
 808
 809 2009-01-11  Christ Faylor  <me.gdb@cgf.cx>
 810
 811         * win32-nat.h: Delete.
 812         * windows-nat.h: Rename from win32-nat.h.
 813         * win32-nat.c: Delete.
 814         * windows-nat.c: Rename from win32-nat.c.
 815         * win32-termcap.c: Delete.
 816         * windows-termcap.c: Rename from win32-termcap.c.
 817         * amd64-windows-nat.c: Handle rename from win32-nat.h -> windows-nat.h.
 818         * configure.ac: Handle rename from win32-termcap.c ->
 819         windows-termcap.c.
 820         * configure: Regenerate.
 821         * gdb_curses.h: Change comment to reflect rename from win32-termcap.c
 822         -> windows-termcap.c.
 823         * i386-cygwin-tdep.c: Handle rename from win32-tdep.h ->
 824         windows-tdep.h.
 825         * i386-windows-nat.c: Refect rename from win32-nat.h -> windows-nat.h.
 826         * windows-nat.c: Ditto.  Also reflect rename from from win32-tdep.h ->
 827         windows-tdep.h.
 828         (win32_make_so): Handle cygwin compiler warning due to change of
 829         load_addr from DWORD to LPVOID.
 830         (handle_load_dll): Use %p in format string to properly print address
 831         and avoid a compiler warning.
 832         (DEBUG_EXCEPTION_SIMPLE): Ditto.
 833         (handle_exception): Ditto.
 834         * windows-tdep.c: Handle rename from win32-tdep.h -> windows-tdep.h.
 835         * config/i386/cygwin.mh: Handle rename from win32-nat.o ->
 836         windows-nat.o.
 837         * config/i386/mingw.mh: Ditto.
 838         * config/i386/mingw64.mh: Ditto.
 839
 840 2009-01-11  Jan Kratochvil  <jan.kratochvil@redhat.com>
 841
 842         * f-typeprint.c (f_type_print_varspec_suffix): Convert the autovariable
 843         arrayprint_recurse_level to a parameter.  Update all the callers.  New
 844         comment at autovariables.
 845
 846 2009-01-11  Jan Kratochvil  <jan.kratochvil@redhat.com>
 847
 848         * gdbtypes.c (make_qualified_type, replace_type): Reformat to the GNU
 849         coding style.
 850
 851 2009-01-11  Joel Brobecker  <brobecker@adacore.com>
 852
 853         * target.c (target_xfer_partial): Use host_address_to_string to
 854         print the address of readbuf and writebuf. Cast the address of
 855         elements inside the myaddr buffer into intptr_t.
 856         (deprecated_debug_xfer_memory): Use paddress to print memaddr.
 857         Cast the address of elements inside the myaddr buffer into
 858         intptr_t.
 859
 860 2009-01-11  Joel Brobecker  <brobecker@adacore.com>
 861
 862         * amd64-windows-nat.c, amd64-windows-tdep.c: New files.
 863         * config/i386/mingw64.mh, config/i386/nm-cygwin64.h: New files.
 864         * configure.host, configure.tgt: Add handling for x86_64/windows.
 865         * config/djgpp/fnchange.lst: Add entries for amd64-windows-nat.c
 866         and amd64-windows-tdep.c.
 867
 868 2009-01-11  Joel Brobecker  <brobecker@adacore.com>
 869
 870         * win32-tdep.h, win32-tdep.c: New files.
 871         * i386-cygwin-tdep.h: Delete.
 872         * i386-cygwin-tdep.c: Include win32-tdep.h instead of
 873         i386-cygwin-tdep.h.
 874         (win32_xfer_shared_library): Delete.  Moved to win32-tdep.c.
 875         * win32-nat.c: Likewise.
 876         * configure.tgt: Add win32-tdep.o to the list of target object
 877         files for i386-cygwin and i386-mingw targets.
 878
 879 2009-01-11  Joel Brobecker  <brobecker@adacore.com>
 880
 881         * win32-nat.h: New file.
 882         * win32-nat.c (mappings): Initialize to NULL.
 883         (win32_set_context_register_offsets): New function.
 884         * i386-windows-nat.c: New file.
 885         (mappings): Moved here from win32-nat.c.
 886         (_initialize_i386_windows_nat): New function.
 887         * config/i386/mingw.mh (NATDEPFILES): Add i386-windows-nat.o.
 888         * config/i386/cygwin.mh (NATDEPFILES): Likewise.
 889
 890 2009-01-09  Andreas Schwab  <schwab@suse.de>
 891
 892         * Makefile.in (init.c): Set LANG/LC_ALL to C, not c.
 893
 894 2009-01-09  Daniel Jacobowitz  <dan@codesourcery.com>
 895
 896         * gdbtypes.c (append_composite_type_field): Correct the location of
 897         appended fields.
 898
 899 2009-01-09  Pedro Alves  <pedro@codesourcery.com>
 900
 901         * defs.h (deprecated_error_hook): Delete declaration.
 902         * interps.c (clear_interpreter_hooks): Adjust.
 903         * remote-sim.c (gdb_os_error): Don't try to call
 904         deprecated_error_hook.  No need to call exit anymore.
 905         * top.c (deprecated_error_hook): Delete.
 906
 907 2009-01-09  Joel Brobecker  <brobecker@adacore.com>
 908
 909         * arch-utils.c (gdbarch_update_p): Use host_address_to_string
 910         to print the address of the gdbarch pointer.
 911
 912 2009-01-09  Joel Brobecker  <brobecker@adacore.com>
 913
 914         * gdbarch.sh: Fix all the compilation errors on amd64-windows
 915         due to casting a pointer to a long when printing a function
 916         address. Instead, use host_address_to_string to convert our
 917         address to a string.
 918         * gdbarch.c: Regenerate.
 919
 920 2009-01-09  Joel Brobecker  <brobecker@adacore.com>
 921
 922         * event-top.c (async_disconnect, async_stop_sig): use "raise"
 923         instead of "kill" to raise a signal.
 924
 925 2009-01-09  Joel Brobecker  <brobecker@adacore.com>
 926
 927         * win32-nat.c (get_module_name): Change the type of parameter
 928         "base_address" to LPVOID.  Remove unnecessary cast.
 929         (struct lm_info): Change type of load_addr to LPVOID.
 930         (win32_make_so): Change the type of parameter "load_addr"
 931         to LPVOID.  Remove some unnecessary casts.
 932         (handle_unload_dll): Change the type of "lpBaseOfDll" to LPVOID.
 933         (win32_xfer_shared_libraries): Add missing cast.
 934
 935 2009-01-09  Joel Brobecker  <brobecker@adacore.com>
 936
 937         * win32-nat.c (has_detach_ability, set_process_privilege):
 938         Cast the result of GetProcAddress to (void *) to avoid
 939         a compilation warning.
 940
 941 2009-01-09  Joel Brobecker  <brobecker@adacore.com>
 942
 943         * win32-nat.c (CONTEXT_EXTENDED_REGISTERS): Define to 0 if not
 944         already defined.
 945
 946 2009-01-09  Joel Brobecker  <brobecker@adacore.com>
 947
 948         * win32-nat.c (get_image_name, win32_xfer_memory): Fix type
 949         definition of local variable "done".
 950         (info_w32_command, handle_exception): Remove unnecessary cast.
 951
 952 2009-01-09  Joel Brobecker  <brobecker@adacore.com>
 953
 954         * win32-nat.c (kernel32_DebugSetProcessKillOnExit): Renames
 955         DebugSetProcessKillOnExit.  Update all uses in this file.
 956         (kernel32_DebugActiveProcessStop): Renames DebugActiveProcessStop.
 957         Update all uses in this file.
 958
 959 2009-01-09  Joel Brobecker  <brobecker@adacore.com>
 960
 961         * win32-nat.c (do_initial_win32_stuff): Add new ops parameter,
 962         and use it when pushing the target.
 963         (win32_attach, win32_create_inferior): Update call to
 964         do_initial_win32_stuff.
 965         (win32_detach, win32_mourn_inferior): Use our ops parameter
 966         instead of the global win32_ops to unpush the target.
 967
 968 2009-01-09  Joel Brobecker  <brobecker@adacore.com>
 969
 970         * ser-mingw.c (ser_windows_open): Use proper type when casting
 971         in call to _open_osfhandle.
 972
 973 2009-01-09  Kai Tietz  <kai.tietz@onevision.com>
 974
 975         * coff-pe-read.c (read_pe_exported_syms): Fix typo.
 976
 977 2009-01-09  Joel Brobecker  <brobecker@adacore.com>
 978
 979         * CONTRIBUTE: Minor reformatting.
 980
 981 2009-01-08  Kai Tietz  <kai.tietz@onevision.com>
 982
 983         * MAINTAINERS: Add myself to Write After Approval.
 984         * coff-pe-read.c (read_pe_exported_syms): Enable read of PE+
 985         export directory.
 986
 987 2009-01-08  Nathan Froyd  <froydnj@codesourcery.com>
 988
 989         * remote-sim.c (gdb_os_error): Mark as a noreturn function.
 990         Call exit to make it obvious to GCC.
 991
 992 2009-01-08  Tom Tromey  <tromey@redhat.com>
 993
 994         PR breakpoints/9350:
 995         * varobj.c (varobj_invalidate): Unconditionally free
 996         all_rootvarobj.
 997         * symfile.c (syms_from_objfile): Free local_addr when returning
 998         normally.
 999         * exec.c (exec_file_attach): Do cleanups before returning.
1000         (exec_file_command): Likewise.
1001         * corefile.c (reopen_exec_file): Do cleanups before returning.
1002         * breakpoint.c (insert_breakpoint_locations): Do cleanups before
1003         returning.
1004         (do_vec_free): New function.
1005         (update_global_location_list): Make a cleanup for old_locations.
1006         Do cleanups before returning.  Remove unused variable 'e'.
1007         (find_condition_and_thread): Free result of parsing the
1008         expression.
1009         (print_it_typical): Do cleanups before returning.
1010         (breakpoint_re_set_one): Always free sals.sals.
1011
1012 2009-01-08  Joel Brobecker  <brobecker@adacore.com>
1013             Emi Suzuki  <emi-suzuki@tjsys.co.jp>
1014
1015         * breakpoint.c (do_enable_breakpoint): Use update_watchpoint for
1016         watchpoints.
1017
1018 2009-01-07  Doug Evans  <dje@google.com>
1019
1020         * top.c (gdb_prompt_string): Delete, unused.
1021
1022 2009-01-07  Pedro Alves  <pedro@codesourcery.com>
1023
1024         Delete ONE_PROCESS_WRITETEXT leftovers.
1025
1026         * breakpoint.c (insert_bp_location): Delete process_warning
1027         argument.  Adjust.
1028         (insert_breakpoint_locations): Adjust.
1029         (reattach_breakpoints): Adjust.
1030         * infrun.c (normal_stop): Drop "It might be running in another
1031         process" notice.
1032
1033 2009-01-07  Stan Shebs  <stan@codesourcery.com>
1034
1035         * config/pa/linux.mh (XDEPFILES): Remove.
1036
1037 2009-01-07  Doug Evans  <dje@google.com>
1038
1039         * cli/cli-cmds.c (set_debug): Fix cut-n-paste error.
1040
1041 2009-01-07  Jan Kratochvil  <jan.kratochvil@redhat.com>
1042
1043         * f-typeprint.c (f_type_print_base <TYPE_CODE_STRUCT>): Fix output
1044         spacing, a regression from 2008-04-22.
1045
1046 2009-01-07  Joel Brobecker  <brobecker@adacore.com>
1047
1048         * utils.c (gdb_print_host_address): Adjust implementation to
1049         reuse host_address_to_string. Move comment explaining the conversion
1050         from host address to string from here...
1051         (host_address_to_string): ... to there.
1052
1053 2009-01-07  Emi Suzuki  <emi-suzuki@tjsys.co.jp>
1054
1055         * MAINTAINERS: Add myself for write after approval privileges.
1056
1057 2009-01-06  Tom Tromey  <tromey@redhat.com>
1058
1059         * value.c (set_internalvar): Use value_free, not xfree.
1060
1061 2009-01-06  Jim Blandy  <jimb@red-bean.com>
1062
1063         Check return values of functions declared with warn_unused_result
1064         attribute in GLIBC 2.8.
1065         * cli/cli-cmds.c (pwd_command): Check return value from getcwd.
1066         * inflow.c (check_syscall): New function.
1067         (new_tty): Use check_syscall to check return values from open and dup.
1068         * linux-nat.c (linux_nat_info_proc_cmd): Check return value from fgets.
1069         * main.c (captured_main): Call cwd after setting up gdb_stderr;
1070         check for errors from getcwd.
1071         * mi/mi-cmd-env.c (mi_cmd_env_pwd): Check return value from getcwd.
1072         * ui-file.c (stdio_file_write): Ignore return value from fwrite.
1073         (stdio_file_fputs): Same.
1074         * utils.c (internal_vproblem): abort if last-ditch error message
1075         write fails.
1076
1077         * top.c (gdb_init): Don't set the current directory here; that's
1078         already been done in captured_main.
1079
1080 2009-01-06  Sandra Loosemore  <sandra@codesourcery.com>
1081
1082         * ser-tcp.c: Adjust includes.
1083         (tcp_set_cmdlist, tcp_show_cmdlist): Declare.
1084         (tcp_auto_retry, tcp_retry_limit): Declare.
1085         (TIMEOUT): Remove, in favor of tcp_retry_limit.
1086         (POLL_INTERVAL): Increase to 5, in favor of backoff logic.
1087         (wait_for_connect): New function.
1088         (net_open): Use it.  Add auto-retry logic.
1089         (set_tcp_cmd, show_tcp_cmd): New functions.
1090         (_initialize_ser_tcp): Initialize new "set/show tcp auto-retry"
1091         and "set/show tcp connect-timeout" commands.
1092         * NEWS: Document new commands.
1093
1094 2009-01-05  Tom Tromey  <tromey@redhat.com>
1095
1096         * python/python-internal.h (Py_ssize_t): Define as int.
1097
1098 2009-01-05  Jim Blandy  <jimb@red-bean.com>
1099
1100         * MAINTAINERS: Fix my e-mail address as steering committee member.
1101
1102 2009-01-03  Joel Brobecker  <brobecker@adacore.com>
1103
1104         Updated copyright notices for most files.
1105
1106 2009-01-03  Joel Brobecker  <brobecker@adacore.com>
1107
1108         * top.c (print_gdb_version): Update copyright year.
1109
1110 2009-01-03  Joel Brobecker  <brobecker@adacore.com>
1111
1112         * config/djgpp/fnchange.lst: Add entry for ChangeLog-2008.
1113
1114 2009-01-01  Pedro Alves  <pedro@codesourcery.com>
1115
1116         PR breakpoints/9681:
1117         * exceptions.h (enum errors): New error type, MEMORY_ERROR.
1118         * corefile.c (memory_error): Rewrite to throw a MEMORY_ERROR.
1119         * breakpoint.c (fetch_watchpoint_value): Ignore MEMORY_ERRORs, but
1120         retrow all other exceptions.
1121
1122 For older changes see ChangeLog-2008.
1123 \f
1124 Local Variables:
1125 mode: change-log
1126 left-margin: 8
1127 fill-column: 74
1128 version-control: never
1129 coding: utf-8
1130 End: