1 2011-05-26 Pedro Alves <pedro@codesourcery.com>
3 * infcmd.c (finish_backward): Set a step-resume breakpoint at the
4 function's entry point instead of a manually managed momentary
5 breakpoint, and only ever issue one proceed call.
6 * infrun.c (handle_inferior_event) <BPSTAT_WHAT_STEP_RESUME>: If
7 doing a reverse-finish, switch to stepi mode, to do another step.
8 (insert_step_resume_breakpoint_at_sal): Make public.
9 (normal_stop): No need to save function value return registers if
11 * inferior.h (insert_step_resume_breakpoint_at_sal): Declare.
13 2011-05-26 Pedro Alves <pedro@codesourcery.com>
15 * breakpoint.h (enum bptype) <bp_hp_step_resume>: New.
16 (enum bpstat_what_main_action): Move BPSTAT_WHAT_STEP_RESUME
17 before BPSTAT_WHAT_STOP_SILENT. Add BPSTAT_WHAT_HP_STEP_RESUME
19 * breakpoint.c (update_breakpoints_after_exec): Also delete hp
20 step-resume breakpoints.
21 (print_it_typical): Handle bp_hp_step_resume.
23 (bptype_string): Ditto.
24 (print_one_breakpoint_location): Ditto.
25 (allocate_bp_location): Ditto.
27 (breakpoint_re_set_one): Ditto.
28 * infrun.c (handle_inferior_event): Adjust. Split
29 BPSTAT_WHAT_STEP_RESUME handling in BPSTAT_WHAT_STEP_RESUME and
30 BPSTAT_WHAT_HP_STEP_RESUME.
31 (insert_step_resume_breakpoint_at_sal): Rename to ...
32 (insert_step_resume_breakpoint_at_sal_1): ... this. Add bptype
34 (insert_step_resume_breakpoint_at_sal): Reimplement on top of
35 insert_step_resume_breakpoint_at_sal_1.
36 (insert_step_resume_breakpoint_at_frame): Rename to ...
37 (insert_hp_step_resume_breakpoint_at_frame): ... this. Adjust to
38 set a high-priority step-resume breakpoint.
39 (insert_step_resume_breakpoint_at_frame): Adjust comment.
40 (insert_step_resume_breakpoint_at_caller): Ditto.
42 2011-05-26 Pedro Alves <pedro@codesourcery.com>
44 * breakpoint.c (iterate_over_related_breakpoints): New.
45 (do_map_delete_breakpoint): New.
46 (delete_command): Pass do_map_delete_breakpoint to
47 map_breakpoint_numbers.
48 (do_disable_breakpoint): New.
49 (do_map_disable_breakpoint): Iterate over the breakpoint's related
51 (do_enable_breakpoint): Rename to ...
52 (enable_breakpoint_disp): ... this.
53 (enable_breakpoint): Adjust.
54 (do_enable_breakpoint): New.
55 (enable_once_breakpoint): Delete.
56 (do_map_enable_breakpoint): New.
57 (do_map_enable_once_breakpoint): New.
58 (enable_once_command, enable_delete_command)
59 (delete_trace_command): Iterate over the breakpoint's related
62 2011-05-26 Pedro Alves <pedro@codesourcery.com>
64 * alpha-tdep.c (alpha_cannot_fetch_register): Don't return true
65 for ALPHA_ZERO_REGNUM.
66 (alpha_supply_int_regs): Explicitly supply zero as the value for
67 ALPHA_ZERO_REGNUM in the register cache.
68 * alpha-nat.c (fetch_osf_core_registers): Ditto.
70 2011-05-26 Yao Qi <yao@codesourcery.com>
72 * gdb/gdb_thread_db.h: Remove HAVE_UINTPTR_T.
74 2011-05-26 Tristan Gingold <gingold@adacore.com>
76 * symfile.h (struct dwarf2_section_names): New type.
77 (struct dwarf2_debug_sections): New type.
78 (dwarf2_has_info): Add parameter.
79 * dwarf2read.c (dwarf2_elf_names): New variable.
80 (INFO_SECTION, ABBREV_SECTION, LINE_SECTION, LOC_SECTION)
81 (MACINFO_SECTION, STR_SECTION, RANGES_SECTION, TYPES_SECTION)
82 (FRAME_SECTION, EH_FRAME_SECTION, GDB_INDEX_SECTION): Remove.
83 (dwarf2_has_info): Add names parameter. Pass names
84 to dwarf2_locate_sections.
85 (section_is_p): Rewrite using the names parameter.
86 (dwarf2_locate_sections): Use section names from the names parameter.
87 * coffread.c (coff_symfile_read): Adjust call to dwarf2_has_info.
88 * elfread.c (read_psyms): Ditto.
89 * machoread.c (macho_symfile_read): Ditto.
91 2011-05-25 Andreas Schwab <schwab@redhat.com>
94 * event-loop.c (handle_file_event): Don't handle POLLHUP as error.
96 2011-05-24 Keith Seitz <keiths@redhat.com>
99 * linespec.c (keep_name_info): Add handling for "volatile" keyword.
100 (decode_compound): Unconditionally call keep_name_info.
102 2011-05-24 Pedro Alves <pedro@codesourcery.com>
104 * breakpoint.c (watchpoint_check): If the watchpoint went out of
105 scope, clear its command list.
106 (map_breakpoint_numbers): Don't walk the related breakpoints list
109 2011-05-24 Tom Tromey <tromey@redhat.com>
111 * MAINTAINERS: Move Jim Blandy to past maintainers.
113 2011-05-24 Tristan Gingold <gingold@adacore.com>
115 * symfile.h (enum dwarf2_section_enum): New type.
116 (dwarf2_get_section_info): New prototype.
117 * dwarf2read.c (dwarf2_get_section_info): Replace parameter
118 section_name by sect. Use a switch to select the info.
119 * dwarf2-frame.c (warf2_get_section_info): Remove prototype.
120 (dwarf2_build_frame_info): Adjust calls to dwarf2_get_section_info.
122 2011-05-24 Pedro Alves <pedro@codesourcery.com>
124 * solib-svr4.c (svr4_solib_create_inferior_hook): Skip setting
125 shared library event breakpoint if there's no execution.
127 2011-05-24 Thiago Jung Bauermann <bauerman@br.ibm.com>
129 * breakpont.c (remove_hw_watchpoints): Remove unused function.
130 * breakpoint.h remove_hw_watchpoints(): Remove prototype.
132 2011-05-23 Tom Tromey <tromey@redhat.com>
134 * c-lang.c (evaluate_subexp_c): Use expect_type if it is not
137 2011-05-23 Doug Evans <dje@google.com>
139 * python/lib/gdb/printing.py (register_pretty_printer): Add missing
140 entry for RuntimeError to doc string.
142 2011-05-23 Jerome Guitton <guitton@adacore.com>
144 * sparc-tdep.c (sparc_skip_stack_check): Recognize a new instruction
145 sequence for probing loops.
147 2011-05-23 Pedro Alves <pedro@codesourcery.com>
149 * infrun.c (user_visible_resume_ptid): Fix typos in describing
152 2011-05-21 Mark Kettenis <kettenis@gnu.org>
154 * sparc-nat.c (sparc_fetch_inferior_registers): Explicitly supply
155 zero as the value for %g0 in the register cache.
156 * sparc-tdep.c (sparc32_supply_gregset): Likewise.
157 * sparc64-tdep.c (sparc64_supply_gregset): Likewise.
159 2011-05-20 Pedro Alves <pedro@codesourcery.com>
161 * infrun.c (proceed): Set previous_inferior_ptid here.
162 (init_wait_for_inferior): Initialize previous_inferior_ptid from
163 inferior_ptid, not null_ptid.
164 (wait_for_inferior): Don't initialize previous_inferior_ptid here.
165 (fetch_inferior_event): Nor here.
167 2011-05-20 Pedro Alves <pedro@codesourcery.com>
169 * inf-loop.c (inferior_event_handler): Only output a message if
172 2011-05-20 Luis Machado <lgustavo@codesourcery.com>
174 * MAINTAINERS: Update my e-mail address.
176 2011-05-20 Pedro Alves <pedro@codesourcery.com>
178 * infrun.c (proceed): Switch the inferior event loop to
179 INF_EXEC_COMPLETE if the target refused to resume from a
182 2011-05-20 Pedro Alves <pedro@codesourcery.com>
184 * infcmd.c: Include "inf-loop.h".
185 (step_once): When stepping into an inline subroutine, pretend the
186 target has run. If the target can async, switch the inferior
187 event loop to INF_EXEC_COMPLETE.
188 * inferior.h (user_visible_resume_ptid): Declare.
189 * infrun.c (user_visible_resume_ptid): New function, factored out
192 * mi/mi-main.c (mi_execute_async_cli_command): Remove assertion
193 that the current thread is running. Merge async and sync
196 2011-05-20 Pedro Alves <pedro@codesourcery.com>
198 * infcmd.c (step_1): Simplify synchronous case.
200 2011-05-20 Pedro Alves <pedro@codesourcery.com>
202 * tracepoint.c: Include exceptions.h.
203 (TFILE_PID): Move higher in file.
204 (tfile_open): Delay pushing the tfile target until we're assured
205 the tfile header is present in the file. Wrap reading the initial
206 newline-terminated lines in TRY_CATCH. Pop the target if the
207 initial setup failed. Add the tfile's thread immediately
208 aftwards, before any non-essential setup. Don't skip
209 post_create_inferior if there are no traceframes present in the
211 (tfile_close): Remove redundant check for null before xfree call.
212 (tfile_thread_alive): New function.
213 (init_tfile_ops): Register it as to_thread_alive callback.
215 2011-05-20 Pedro Alves <pedro@codesourcery.com>
217 * tracepoint.c (tfile_open): Delete #if 0'd code.
219 2011-05-20 Jan Kratochvil <jan.kratochvil@redhat.com>
221 Fix -readnow for -gdwarf-4 unused type units.
222 * dwarf2read.c (struct signatured_type): Remove the field offset.
223 (create_signatured_type_table_from_index): Remove its initialization.
224 (create_debug_types_hash_table): Likewise. Initialize per_cu.offset
225 instead. Add a complaint call.
226 (process_psymtab_comp_unit): Change assignment to gdb_assert.
227 (process_type_comp_unit, lookup_die_type, dump_die_shallow)
228 (lookup_signatured_type_at_offset, read_signatured_type)
229 (write_one_signatured_type): Update the field for per_cu.
231 2011-05-19 Tom Tromey <tromey@redhat.com>
233 * python/py-inferior.c (python_inferior_exit): Use
235 (python_on_resume): Likewise.
237 2011-05-19 Matt Rice <ratmice@gmail.com>
239 * breakpoint.c (bpstat_do_actions_1): Call prevent_dont_repeat.
241 2011-05-19 Hui Zhu <teawater@gmail.com>
243 * tracepoint.c (tfile_trace_find): Return directly when num is -1.
245 2011-05-19 Hui Zhu <teawater@gmail.com>
247 * xcoffread.c (read_xcoff_symtab): Initialize fcn_aux_saved.
249 2011-05-18 Tom Tromey <tromey@redhat.com>
251 * dwarf2read.c (dwarf2_add_field): Constify.
252 * value.c (value_static_field): Constify.
253 * gdbtypes.h (struct main_type) <field.field_location.physname>:
255 * ax-gdb.c (gen_static_field): Constify
257 2011-05-18 Jan Kratochvil <jan.kratochvil@redhat.com>
259 * linux-nat.c (kill_callback): Use SIGKILL first.
261 2011-05-18 Joel Brobecker <brobecker@adacore.com>
263 * ada-lang.c (print_it_exception): Avoid use of sprintf.
265 2011-05-18 Tom Tromey <tromey@redhat.com>
267 * value.c (value_fn_field): Constify.
268 * symtab.c (gdb_mangle_name): Constify.
269 * stabsread.c (update_method_name_from_physname): Make 'physname'
271 * p-typeprint.c (pascal_type_print_method_args): Make arguments
272 const. Use explicit fputc_filtered loop.
273 (pascal_type_print_base): Constify.
274 * p-lang.h (pascal_type_print_method_args): Update.
275 * linespec.c (add_matching_methods): Constify.
276 (add_constructors): Likewise.
277 * jv-typeprint.c (java_type_print_base): Constify.
278 * gdbtypes.h (struct cplus_struct_type)
279 <fn_fieldlist.fn_field.physname>: Now const.
280 * dwarf2read.c (compute_delayed_physnames): Constify.
281 (dwarf2_add_member_fn): Likewise.
282 * c-typeprint.c (c_type_print_base): Constify. Use cleanups.
284 2011-05-18 Pedro Alves <pedro@codesourcery.com>
286 * infrun.c (resume): Mention which is the current thread, and its
287 current PC in debug output.
288 (prepare_to_proceed): Mention the thread switching in debug
291 2011-05-18 Tom Tromey <tromey@redhat.com>
293 * linux-thread-db.c (try_thread_db_load_from_pdir_1): Fix absolute
294 path check. Use xmalloc and cleanups.
295 (try_thread_db_load_from_dir): Use xmalloc and cleanups.
297 2011-05-17 Tom Tromey <tromey@redhat.com>
299 * cp-valprint.c (cp_print_value_fields): Catch errors from
302 2011-05-17 Tom Tromey <tromey@redhat.com>
304 * dwarf2read.c (dwarf2_get_die_type): Call
305 get_die_type_at_offset.
306 * dwarf2expr.c (dwarf_get_base_type): Handle NULL return from
307 get_base_type function.
309 2011-05-17 Tomas Martinec <fyzmat@gmail.com>
311 * infrun.c (handle_inferior_event) <handling deferred step>: Clear
314 2011-05-16 Doug Evans <dje@google.com>
316 * python/py-auto-load.c (source_section_scripts): Mention objfile
319 2011-05-15 Doug Evans <dje@google.com>
321 * linux-thread-db.c (try_thread_db_load_from_pdir_1): New function.
322 (try_thread_db_load_from_pdir): Call it. If unable to find
323 libthread_db in directory of libpthread, see if we're looking at
324 the separate-debug-info copy.
326 * python/py-autoload.c (print_script): Print "Missing" instead of
327 "No" for missing scripts.
328 (info_auto_load_scripts): Tweak "Loaded" column to fit "Missing".
330 2011-05-13 Doug Evans <dje@google.com>
332 * ui-file.c (stdio_file_write_async_safe): Add comment.
334 2011-05-14 Hui Zhu <teawater@gmail.com>
336 * ui-file.c (stdio_file_write_async_safe): Add empty check for build.
338 2011-05-13 Doug Evans <dje@google.com>
340 Support $pdir and $sdir in libthread-db-search-path.
341 * NEWS: Mention $sdir,$pdir.
342 * gdb_thread_db.h (LIBTHREAD_DB_SEARCH_PATH): Add $sdir:$pdir.
343 * linux-thread-db.c (try_thread_db_load_from_pdir): New function.
344 (try_thread_db_load_from_sdir): New function.
345 (try_thread_db_load_from_dir): New function.
346 (thread_db_load_search): Handle $pdir, $sdir. Remove trying of
347 system directories if search of libthread-db-search-path fails,
348 that is now done via $sdir.
349 (has_libpthread): New function.
350 (thread_db_load): Remove search for libthread_db in directory of
351 libpthread, that is now done via $pdir.
353 * NEWS: Mention "info auto-load-scripts".
354 * python/py-auto-load.c (struct auto_load_pspace_info): New member
355 script_not_found_warning_printed.
356 (init_loaded_scripts_info): Renamed from create_loaded_scripts_hash,
357 all callers updated. Initialize script_not_found_warning_printed.
358 (get_auto_load_pspace_data_for_loading): New function.
359 (maybe_add_script): New function.
360 (source_section_scripts): Simplify. Only print one warning regardless
361 of the number of auto-load scripts not found.
362 (clear_section_scripts): Clear script_not_found_warning_printed.
363 (auto_load_objfile_script): Record script in hash table.
364 (count_matching_scripts): New function.
365 (maybe_print_script): Renamed from maybe_print_section_script, all
366 callers updated. Rewrite to use ui_out_*.
367 (info_auto_load_scripts): Renamed from
368 maintenance_print_section_scripts, all callers updated.
369 (gdbpy_initialize_auto_load): "maintenance print section-scripts"
370 renamed as "info auto-load-scripts".
372 2011-05-13 Tom Tromey <tromey@redhat.com>
374 * dwarf2expr.c (read_uleb128): Cast intermediate result.
375 (read_sleb128): Likewise.
377 2011-05-13 Tom Tromey <tromey@redhat.com>
379 * dwarf2loc.c (disassemble_dwarf_expression): Fix instruction
382 2011-05-13 Doug Evans <dje@google.com>
384 * linux-nat.c (debug_linux_nat_async): Delete.
385 Replace all references to use debug_linux_nat instead.
386 (show_debug_linux_nat_async): Delete.
387 (sigchld_handler): Call ui_file_write_async_safe instead of
389 (_initialize_linux_nat): Remove `set debug lin-lwp-async'.
390 * ui-file.c (struct ui_file): New member to_write_async_safe.
391 (null_file_write_async_safe): New function.
392 (ui_file_write_async_safe): New function.
393 (set_ui_file_write_async_safe): New function.
394 (ui_file_new): Initialize to_write_async_safe.
395 (stdio_file_write_async_safe): New function.
396 (struct stdio_file): New member fd.
397 (stdio_file_new): Initialize to_write_async_safe, fd.
398 (stdio_file_read, stdio_file_isatty): New stdio->fd instead of calling
400 * ui-file.h (ui_file_write_async_safe_ftype): New typedef.
401 (set_ui_file_write_async_safe): Declare.
402 (ui_file_write_async_safe): Declare.
404 2011-05-13 Tom Tromey <tromey@redhat.com>
406 * utils.c (do_value_free): New function.
407 (make_cleanup_value_free): Likewise.
408 * dwarf2loc.c (dwarf2_evaluate_loc_desc_full): Handle value
410 (dwarf2_loc_desc_needs_frame): Call
411 make_cleanup_value_free_to_mark.
412 * dwarf2expr.h (struct dwarf_expr_context) <mark>: Remove field.
413 * dwarf2expr.c (free_dwarf_expr_context): Don't call
415 (new_dwarf_expr_context): Don't call value_mark.
416 * dwarf2-frame.c (execute_stack_op): Call
417 make_cleanup_value_free_to_mark.
418 * defs.h (make_cleanup_value_free): Declare.
420 2011-05-13 Thiago Jung Bauermann <bauerman@br.ibm.com>
422 * mi/mi-main.c (mi_cmd_execute): Use cleanup from
423 prepare_execute_command.
424 * top.c (prepare_execute_command): Return cleanup.
425 (execute_command): Use cleanup from prepare_execute_command.
426 * top.h (prepare_execute_command): Change prototype to return
428 * defs.h (struct value): Add opaque declaration.
429 (make_cleanup_value_free_to_mark): Add prototype.
430 * utils.c (do_value_free_to_mark): New function.
431 (make_cleanup_value_free_to_mark): Likewise.
433 2011-05-12 Tom Tromey <tromey@redhat.com>
435 * dwarf2expr.c (execute_stack_op) <DW_OP_shr>: Unconditionally
436 cast left-hand-side to unsigned.
438 2011-05-12 Tom Tromey <tromey@redhat.com>
441 * value.h (value_from_contents): Declare.
442 * value.c (value_from_contents): New function.
443 * dwarf2read.c (dwarf_stack_op_name): Add new values.
444 (dwarf2_get_die_type): New function.
445 * dwarf2loc.c (dwarf_expr_get_base_type): New function.
446 (allocate_piece_closure): Acquire reference to values.
447 (read_pieced_value): Update for value-based expressions.
448 (write_pieced_value): Likewise.
449 (free_pieced_value_closure): Call value_free as needed.
450 (dwarf2_evaluate_loc_desc_full): Set get_base_type field.
451 Update for value-based expressions.
452 * dwarf2loc.h (dwarf2_get_die_type): Declare.
453 * dwarf2expr.h (struct dwarf_stack_value) <value>: Change type.
454 <get_base_type>: New field.
455 (struct dwarf_expr_piece) <v.value>: Change type.
456 <v.regno>: New field.
457 (struct dwarf_expr_context) <mark>: New field.
458 (dwarf_expr_piece, dwarf_expr_fetch): Update.
459 (dwarf_expr_pop, dwarf_expr_push): Remove.
460 (dwarf_expr_push_address): Declare.
461 * dwarf2expr.c (dwarf_arch_cookie): New global.
462 (struct dwarf_gdbarch_types): New.
463 (dwarf_gdbarch_types_init, dwarf_expr_address_type): New
465 (dwarf_expr_push): Change type of 'value' argument. Update. Now
467 (dwarf_expr_push_address): New function.
468 (dwarf_expr_pop): Now static.
469 (dwarf_expr_fetch): Change return type.
470 (dwarf_require_integral): New function.
471 (dwarf_expr_fetch): Simplify.
473 (base_types_equal_p, dwarf_get_base_type, get_unsigned_type): New
475 (execute_stack_op) <sign_ext>: Remove.
476 Use values for DWARF stack.
477 <DW_OP_GNU_const_type, DW_OP_GNU_deref_type,
478 DW_OP_GNU_regval_type, DW_OP_GNU_convert, DW_OP_GNU_reinterpret>:
480 (_initialize_dwarf2expr): New function.
482 (new_dwarf_expr_context): Set new field.
483 (free_dwarf_expr_context): Call value_free_to_mark.
484 * dwarf2-frame.c (no_base_type): New function.
485 (execute_stack_op): Set get_base_type field. Update.
487 2011-05-12 Tom Tromey <tromey@redhat.com>
489 * dwarf2read.c (read_common_block): Fix formatting.
491 2011-05-12 Kwok Cheung Yeung <kcy@codesourcery.com>
493 * breakpoint.c (disable_breakpoint): Disable all locations
494 associated with a tracepoint on target if a trace experiment is
496 (disable_command): Disable a specific tracepoint location on target if
497 a trace experiment is running.
498 (do_enable_breakpoint): Enable all locations associated with a
499 tracepoint on target if a trace experiment is running.
500 (enable_command) Enable a specific tracepoint location on target if a
501 trace experiment is running.
502 * target.c (update_current_target): Add INHERIT and de_fault clauses for
503 to_supports_enable_disable_tracepoint, to_enable_tracepoint and
504 to_disable_tracepoint.
505 * target.h: Add declaration of struct bp_location.
506 (struct target_ops): Add new functions
507 to_supports_enable_disable_tracepoint, to_enable_tracepoint and
508 to_disable_tracepoint to target operations.
509 (target_supports_enable_disable_tracepoint): New macro.
510 (target_enable_tracepoint): New macro.
511 (target_disable_tracepoint): New macro.
512 * remote.c (struct remote_state): Add new field.
513 (remote_enable_disable_tracepoint_feature): New.
514 (remote_protocol_features): Add new entry.
515 (remote_supports_enable_disable_tracepoint): New.
516 (remote_enable_tracepoint): New.
517 (remote_disable_tracepoint): New.
518 (init_remote_ops): Add remote_enable_tracepoint,
519 remote_disable_tracepoint and remote_supports_enable_disable_tracepoint
520 to remote operations.
521 * tracepoint.c (start_tracing): Allow tracing to start without any
522 tracepoints enabled with just a warning if they can be re-enabled
524 * NEWS: Add news item for the new behaviour of the enable and disable
525 GDB commands when applied to tracepoints.
526 Add news items for the new remote packets QTEnable and QTDisable.
528 2011-05-11 Jan Kratochvil <jan.kratochvil@redhat.com>
530 * config.in: Regenerate.
531 * configure: Regenerate.
532 * configure.ac <--with-system-readline> (for readline_echoing_p):
534 * tui/tui-io.c (tui_old_readline_echoing_p): Rename to ...
535 (tui_old_rl_echoing_p): ... here.
536 (tui_setup_io): Rename extern declaration readline_echoing_p to
537 _rl_echoing_p. Adjust assignments for the both renames.
539 2011-05-11 Thiago Jung Bauermann <bauerman@br.ibm.com>
541 * symtab.c (lookup_symtab): Run cleanup before returning.
543 2011-05-11 Tom Tromey <tromey@redhat.com>
545 * dwarf2read.c (handle_data_member_location): New function.
546 (dwarf2_add_field): Use it.
547 (read_common_block): Likewise.
549 2011-05-11 Jan Kratochvil <jan.kratochvil@redhat.com>
551 Make addrs->SECTINDEX always defined.
552 * symfile.c (relative_addr_info_to_section_offsets): Check for
553 SECTINDEX -1, not for zero ADDR.
554 (addrs_section_compar): Remove checking for invalid SECTINDEX.
555 (addr_info_make_relative): Set SECTINDEX to -1 for unmatched entries.
556 * symfile.h (struct section_addr_info) <sectindex>: Update the comment
559 2011-05-10 Doug Evans <dje@google.com>
561 * linux-thread-db.c: Whitespace cleanup.
562 (try_thread_db_load_1): Fix comment.
564 * linux-thread-db.c (set_libthread_db_search_path): New function.
565 (_initialize_thread_db): Add setter for libthread-db-search-path.
567 2011-05-09 Doug Evans <dje@google.com>
569 * NEWS: Mention --with-iconv-bin.
570 * configure.ac: New option --with-iconv-bin.
571 * configure: Regenerate.
572 * config.in: Regenerate.
573 * defs.h (relocate_gdb_directory): Declare.
574 * main.c (relocate_gdb_directory): Renamed from relocate_directory,
575 removed progname parameter, and exported. All callers updated.
576 * charset.c (find_charset_names): Use --with-iconv-bin if specified.
578 * linux-nat.c (lin_lwp_attach_lwp): For !WIPSTOPPED case,
579 adding missing call to restore_child_signals_mask.
581 2011-05-09 Pedro Alves <pedro@codesourcery.com>
583 * inferior.h (wait_for_inferior): Remove `thread_exec_as_sigtrap'
585 * infrun.c (proceed, start_remote): Adjust.
586 (wait_for_inferior): Remove `thread_exec_as_sigtrap' parameter,
587 and adjust to not handle it.
588 * solib-irix.c (irix_solib_create_inferior_hook): Adjust.
589 * solib-osf.c (osf_solib_create_inferior_hook): Adjust.
590 * solib-sunos.c (sunos_solib_create_inferior_hook): Adjust.
591 * solib-svr4.c (svr4_solib_create_inferior_hook): Adjust.
592 * windows-nat.c (do_initial_windows_stuff): Adjust.
593 * infcmd.c (attach_command): Adjust.
594 (notice_new_inferior): Adjust.
596 2011-05-06 Ulrich Weigand <uweigand@de.ibm.com>
598 * ppc-linux-tdep.c (ppu2spu_prev_register): Handle pseudo registers.
599 (ppu2spu_unwind_register): Mark pseudo registers unavailable.
600 * spu-tdep.c (op_selb): Use correct value.
602 2011-05-06 Ulrich Weigand <uweigand@de.ibm.com>
604 * spu-linux-nat.c (spu_symbol_file_add_from_memory): Add NULL
605 "parent" parameter to symbol_file_add_from_bfd call.
607 2011-05-06 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
608 Thiago Jung Bauermann <bauerman@br.ibm.com>
610 Implement support for PowerPC BookE masked watchpoints.
611 * NEWS: Mention masked watchpoint support. Create "Changed commands"
613 * breakpoint.h (struct breakpoint_ops) <works_in_software_mode>: New
614 method. Initialize to NULL in all existing breakpoint_ops instances.
615 (struct breakpoint) <hw_wp_mask>: New field.
616 * breakpoint.c (is_masked_watchpoint): Add prototype.
617 (update_watchpoint): Don't set b->val for masked watchpoints. Call
618 breakpoint's breakpoint_ops.works_in_software_mode if available.
619 (watchpoints_triggered): Handle the case of a hardware masked
621 (watchpoint_check): Likewise.
622 (works_in_software_mode_watchpoint): New function.
623 (insert_masked_watchpoint, remove_masked_watchpoint)
624 (resources_needed_masked_watchpoint)
625 (works_in_software_mode_masked_watchpoint, print_it_masked_watchpoint)
626 (print_one_detail_masked_watchpoint, print_mention_masked_watchpoint)
627 (print_recreate_masked_watchpoint, is_masked_watchpoint): New
629 (masked_watchpoint_breakpoint_ops): New structure.
630 (watch_command_1): Check for the existence of the `mask' parameter.
631 Set b->ops according to the type of hardware watchpoint being created.
632 * ppc-linux-nat.c (ppc_linux_insert_mask_watchpoint)
633 (ppc_linux_remove_mask_watchpoint)
634 (ppc_linux_masked_watch_num_registers): New functions.
635 (_initialize_ppc_linux_nat): Initialize to_insert_mask_watchpoint,
636 to_remove_mask_watchpoint and to_masked_watch_num_registers.
637 * target.c (update_current_target): Mention to_insert_mask_watchpoint,
638 to_remove_mask_watchpoint, and to_masked_watch_num_registers.
639 (target_insert_mask_watchpoint, target_remove_mask_watchpoint)
640 (target_masked_watch_num_registers): New functions.
641 * target.h (struct target_ops) <to_insert_mask_watchpoint>,
642 <to_remove_mask_watchpoint>, <to_masked_watch_num_registers>: New
644 (target_insert_mask_watchpoint, target_remove_mask_watchpoint)
645 (target_masked_watch_num_registers): Add prototypes.
647 2011-05-06 Jan Kratochvil <jan.kratochvil@redhat.com>
650 * dwarf2read.c (struct dwarf2_cu): New field has_loclist.
651 (producer_is_gcc_ge_4_0): New function.
652 (process_full_comp_unit): Set also symtab->locations_valid. Move the
653 symtab->language code.
654 (var_decode_location): Set cu->has_loclist.
655 * symtab.c (skip_prologue_sal): New variables saved_pc, force_skip and
656 skip. Intialize force_skip from locations_valid. Move the prologue
657 skipping code into two passes.
658 * symtab.h (struct symtab): Make the primary field a bitfield. New
659 field locations_valid.
661 2011-05-06 Jan Kratochvil <jan.kratochvil@redhat.com>
663 * c-exp.y (qualified_name): Call destructor_name_p with $1.type.
664 (classify_inner_name): Call cp_lookup_nested_type with
666 * cp-namespace.c (cp_lookup_nested_type): New variable
667 saved_parent_type. Call CHECK_TYPEDEF for parent_type. Call
668 type_name_no_tag_or_error with saved_parent_type.
669 * dwarf2read.c (load_partial_dies): Read in any children of
670 DW_TAG_typedef with complaint in such case.
671 * gdbtypes.c (type_name_no_tag_or_error): New function.
672 * gdbtypes.h (type_name_no_tag_or_error): New prototype.
673 * valops.c (destructor_name_p): New comment for parameter type. Remove
674 type const. Make dname and cp const. Call type_name_no_tag_or_error.
675 * value.h (destructor_name_p): Remove type const.
677 2011-05-06 Jan Kratochvil <jan.kratochvil@redhat.com>
679 * symtab.c (compare_symbol_name): New function.
680 (completion_list_add_name, expand_partial_symbol_name): Call it,
681 remove the variable ncmp.
682 (default_make_symbol_completion_list_break_on): Reduce SYM_TEXT_LEN,
685 2011-05-05 Thiago Jung Bauermann <bauerman@br.ibm.com>
687 Demote to sw watchpoint only in update_watchpoint.
688 * breakpoint.c (update_watchpoint): Change between software and
689 hardware watchpoint for all kinds of watchpoints, not just
690 read/write ones. Determine b->exact value here instead of
691 in watch_command_1. Error out if there are not enough resources
692 for a read or access hardware watchpoint.
693 (watch_command_1): Remove logic of checking whether there are
694 enough resources available, since update_watchpoint will do that
695 work now. Don't set b->exact here. Catch exceptions thrown by
696 update_watchpoint and delete the watchpoint.
697 (can_use_hardware_watchpoint): Remove exact_watchpoints argument.
698 Use target_exact_watchpoints instead.
699 (delete_breakpoint): Notify observers only if deleted watchpoint
700 has a breakpoint number assigned to it.
702 2011-05-05 Janis Johnson <janisjo@codesourcery.com>
704 * MAINTAINERS: Add myself as a write-after-approval maintainer.
706 2011-05-05 Jerome Guitton <guitton@adacore.com>
708 * i386-tdep.c (i386_in_stack_tramp_p, i386_stack_tramp_frame_sniffer):
710 (i386_stack_tramp_frame_unwind): New static global.
711 (i386_match_pattern): New function, extracted from i386_match_insn.
712 (i386_match_insn): Use i386_match_pattern.
713 (i386_match_insn_block): New function.
714 (i386_tramp_chain_in_reg_insns)
715 (i386_tramp_chain_on_stack_insns): New static variables.
716 (i386_gdbarch_init): Add i386_stack_tramp_frame_unwind to list
719 2011-05-04 Joseph Myers <joseph@codesourcery.com>
721 * configure.host (xscale*): Don't handle target.
722 * configure.tgt (thumb*-*-* | strongarm*-*-* | xscale-*-*): Don't
725 2011-05-04 Yao Qi <yao@codesourcery.com>
727 * gdb_wait.h: remove WAITTYPE and WCOREDUMP.
729 2011-05-03 Joel Brobecker <brobecker@adacore.com>
732 | 2011-03-07 Michael Snyder <msnyder@vmware.com>
733 | * elfread.c (elf_symtab_read): Stop memory leak.
735 2011-05-03 Pierre Muller <muller@ics.u-strasbg.fr>
737 * nto-tdep.c (nto_target): Replace deprecated call to
738 cygwin_conv_to_posix_path functions by cygwin_conv_path calls.
740 2011-05-03 Jan Kratochvil <jan.kratochvil@redhat.com>
742 Fix false GCC warning.
743 * breakpoint.c (do_enable_breakpoint): Initialize orig_enable_state.
745 2011-05-03 Thiago Jung Bauermann <bauerman@br.ibm.com>
747 * breakpoint.c (update_watchpoint): Move code to change
748 the enable state of breakpoint from here ...
749 (do_enable_breakpoint): ... to here.
751 2011-04-26 Andrew Gontarek <andrewg@cray.com>
753 * valprint.c (val_print_array_elements): Fixed poor performance
754 of printing very large arrays with repeat_count_threshold set
755 to unlimited. New comment.
757 2011-04-29 Tom Tromey <tromey@redhat.com>
759 * mi/mi-parse.c (mi_parse): Remove incorrect sizeof.
760 (mi_parse): Likewise.
761 * breakpoint.c (break_range_command): Use sizeof char*, not
763 (create_breakpoint): Likewise.
764 (parse_breakpoint_sals): Likewise.
766 2011-04-29 Pedro Alves <pedro@codesourcery.com>
768 * linux-nat.c (linux_child_remove_fork_catchpoint)
769 (linux_child_remove_vfork_catchpoint)
770 (linux_child_remove_exec_catchpoint): New functions.
771 (linux_target_install_ops): Install them.
773 2011-04-29 Phil Muldoon <pmuldoon@redhat.com>
777 * varobj.c (install_default_visualizer): Do not install a
778 visualizer if the varobj is CPLUS_FAKE_CHILD.
779 (construct_visualizer): Likewise.
781 2011-04-28 Jan Kratochvil <jan.kratochvil@redhat.com>
783 * symtab.c (expand_partial_symbol_name): New variable NCMP. Support
784 case insensitive comparison.
786 2011-04-28 Ulrich Weigand <ulrich.weigand@linaro.org>
788 * infrun.c (proceed): Revert previous change.
789 (resume): Instead, handle the case of signal delivery while stepping
790 off a breakpoint location here, and only if software single-stepping
791 is used. Handle nested signals.
793 2011-04-28 Yao Qi <yao@codesourcery.com>
795 * arm-tdep.c (copy_unmodified): Rename to ...
796 (arm_copy_unmodified): .. this. New.
797 (copy_preload): Move common part to ...
798 (install_preload): .. this. New.
799 (arm_copy_preload): New.
800 (copy_preload_reg): Move common part to ...
801 (install_preload_reg): ... this. New.
802 (arm_copy_preload_reg): New.
803 (copy_b_bl_blx): Move common part to ...
804 (install_b_bl_blx): .. this. New.
805 (arm_copy_b_bl_blx): New.
806 (copy_bx_blx_reg): Move common part to ...
807 (install_bx_blx_reg): ... this. New.
808 (arm_copy_bx_blx_reg): New.
809 (copy_alu_reg): Move common part to ...
810 (install_alu_reg): ... this. New.
811 (arm_copy_alu_reg): New.
812 (copy_alu_shifted_reg): Move common part to ...
813 (install_alu_shifted_reg): ... this. New.
814 (copy_ldr_str_ldrb_strb): Move common part to ...
815 (install_ldr_str_ldrb_strb): ... this. New.
816 (arm_copy_ldr_str_ldrb_strb): New.
817 (copy_copro_load_store): Move some common part to ...
818 (install_copy_copro_load_store): ... this. New.
819 (arm_copy_copro_load_store): New.
821 (arm_copy_svc): Renamed from copy_svc.
822 (copy_undef): Delete.
823 (arm_copy_undef): Renamed from copy_undef.
824 (decode_ext_reg_ld_st): Delete.
825 (arm_decode_ext_reg_ld_st): Renamed from decode_ext_reg_ld_st.
826 (decode_svc_copro): Delete.
827 (arm_decode_svc_copro): Renamed from decode_svc_copro.
828 (copy_copro_load_store, copy_alu_imm): update callers.
829 (copy_extra_ld_st, copy_block_xfer): Likewise.
830 (decode_misc_memhint_neon, decode_unconditional): Likewise.
831 (decode_miscellaneous, decode_dp_misc): Likewise.
832 (decode_ld_st_word_ubyte, decode_media): Likewise.
833 (decode_b_bl_ldmstm, decode_ext_reg_ld_st): Likewise.
834 (decode_svc_copro, decode_misc_memhint_neon): Likewise.
835 (decode_unconditional, decode_miscellaneous): Likewise.
836 (decode_media, decode_b_bl_ldmstm): Likewise.
837 (arm_process_displaced_insn): Likewise..
838 (decode_misc_memhint_neon): Delete.
839 (arm_decode_misc_memhint_neon): Renamed from decode_misc_memhint_neon.
840 (decode_miscellaneous): Delete.
841 (arm_decode_miscellaneous): Renamed from decode_miscellaneous.
842 (decode_dp_misc): Delete.
843 (arm_decode_dp_misc): Renamed from decode_dp_misc.
844 (decode_ld_st_word_ubyte): Delete.
845 (arm_decode_ld_st_word_ubyte): Renamed from decode_ld_st_word_ubyte.
846 (decode_media): Delete.
847 (arm_decode_media): Renamed from decode_media.
848 (decode_b_bl_ldmstm): Delete.
849 (arm_decode_b_bl_ldmstm): Renamed from decode_b_bl_ldmstm.
850 (decode_ext_reg_ld_st): Delete.
851 (arm_decode_ext_reg_ld_st): Renamed from decode_ext_reg_ld_st.
852 (decode_unconditional): Delete.
853 (arm_decode_unconditional): Renamed from decode_unconditional.
855 2011-04-27 Jan Kratochvil <jan.kratochvil@redhat.com>
857 Case insensitive lookups implementation.
858 * dwarf2read.c: Include ctype.h.
859 (struct mapped_index): New field version.
860 (mapped_index_string_hash): New parameter index_version. New comment
861 for it. Call tolower appropriately.
862 (find_slot_in_mapped_hash): New variable cmp, initialize it, use it.
863 Choose the right index version for mapped_index_string_hash.
864 (dwarf2_read_index): Support also the index version 5. Initialize the
865 new struct mapped_index field version.
866 (hash_strtab_entry): Pass INT_MAX for the new parameter, explain why.
867 (find_slot): Explain the version needs. Pass INT_MAX for the new
869 (write_psymtabs_to_index): Produce version 5.
870 * minsyms.c (lookup_minimal_symbol): New variable cmp, initialize it,
871 use it. New comment for SYMBOL_MATCHES_SEARCH_NAME.
872 * psymtab.c (lookup_partial_symbol): Find the
873 SYMBOL_MATCHES_SEARCH_NAME start of the found block of matching
875 * symtab.c (lookup_symbol_in_language): Remove the case_sensitive_off
877 (search_symbols): Pass REG_ICASE to regcomp for case_sensitive_off.
878 (completion_list_add_name): New variable ncmp, initialize it, use it.
879 * symtab.h (SYMBOL_HASH_NEXT): Always call tolower.
880 * utils.c (strcmp_iw): Support case_sensitive_off.
881 (strcmp_iw_ordered): Sort in a way compatible with case_sensitive_off.
882 New function comment part. New variables saved_string1,
883 saved_string2 and case_pass. Add a proper second pass.
885 2011-04-27 Jan Kratochvil <jan.kratochvil@redhat.com>
887 Replace re_comp/re_exec by regcomp/regexec.
888 * symtab.c (struct search_symbols_data): New fields preg, preg_p.
889 (search_symbols_name_matches): Use them, use regexec.
890 (search_symbols): New variable retval_chain, adjust the use of
891 old_chain against it. Replace re_comp by regcomp. Use the new struct
892 search_symbols_data fields, use regexec instead of re_exec.
894 2011-04-27 Jan Kratochvil <jan.kratochvil@redhat.com>
896 Format the code for the next patch.
897 * dwarf2read.c (struct mapped_index): Include delimiting newlines.
898 * utils.c (strcmp_iw_ordered): Reformat the code for the next patch.
899 New variables c1 and c2.
901 2011-04-27 Ulrich Weigand <ulrich.weigand@linaro.org>
903 * infrun.c (proceed): Do not single-step into signal delivery
904 when stepping off a breakpoint location.
905 (insert_step_resume_breakpoint_at_frame): Move prototype earlier.
906 (insert_step_resume_breakpoint_at_caller): Likewise.
907 (insert_step_resume_breakpoint_at_sal): Likewise.
908 (insert_longjmp_resume_breakpoint): Likewise.
910 2011-04-27 Yao Qi <yao@codesourcery.com>
912 * common/linux-ptrace.h: Remove include <sys/wait.h>.
914 2011-04-27 Joel Brobecker <brobecker@adacore.com>
916 * procfs.c (procfs_pass_signals): Fix advance declaration.
918 2011-04-27 Ulrich Weigand <ulrich.weigand@linaro.org>
920 * target.h (struct target_ops): Remove to_notice_signals;
922 (target_notice_signals): Remove.
923 (target_pass_signals): Add prototype.
924 * target.c (update_current_target): Remove to_notice_signals;
925 mention to_pass_signals.
926 (target_pass_signals): New function.
927 (debug_to_notice_signals): Remove.
928 (setup_target_debug): Do not install debug_to_notice_signals.
930 * infrun.c (signal_pass): New global.
931 (resume): Call target_pass_signals.
932 (handle_inferior_event): Report all signals while stepping over
933 non-steppable watchpoint. Reset trap_expected to ensure breakpoints
934 are re-inserted when stepping over a signal handler.
935 (signal_cache_update): New function.
936 (signal_stop_update): Call it.
937 (signal_print_update): Likewise.
938 (signal_pass_update): Likewise.
939 (handle_command): Call signal_cache_update and target_pass_signals
940 instead of target_notice_signals.
941 (_initialize_infrun): Initialize signal_pass.
943 * linux-nat.c (pass_mask): New global.
944 (linux_nat_pass_signals): New function.
945 (linux_nat_create_inferior): Report all signals initially.
946 (linux_nat_attach): Likewise.
947 (linux_nat_resume): Use pass_mask to decide whether to directly
948 handle an inferior signal.
949 (linux_nat_wait_1): Likewise.
950 (linux_nat_add_target): Install to_pass_signals callback.
952 * nto-procfs.c (notice_signals): Remove.
953 (procfs_resume): Do not call notice_signals.
954 (procfs_notice_signals): Remove.
955 (procfs_pass_signals): New function.
956 (init_procfs_ops): Install to_pass_signals callback instead of
957 to_notice_signals callback.
958 (_initialize_procfs): Report all signals initially.
960 * procfs.c (procfs_notice_signals): Remove.
961 (procfs_pass_signals): New function.
962 (procfs_target): Install to_pass_signals callback instead of
963 to_notice_signals callback.
964 (register_gdb_signals): Remove.
965 (procfs_debug_inferior): Report all signals initially.
966 (procfs_init_inferior): Remove redundant register_gdb_signals call.
968 * remote.c (remote_pass_signals): Add numsigs and pass_signals
969 parameters; use them instead of calling signal_..._state routines.
970 (remote_notice_signals): Remove.
971 (remote_start_remote): Report all signals initially.
972 (remote_resume): Do not call remote_pass_signals.
973 (_initialize_remote): Install to_pass_signals callback instead of
974 to_notice_signals callback.
976 2011-04-27 Pedro Alves <pedro@codesourcery.com>
978 * breakpoint.c (user_settable_breakpoint): Delete.
979 (user_breakpoint_p): Remove check on user_settable_breakpoint.
980 (delete_command): Check user_breakpoint_p instead of looking at
981 the breakpoint's type.
982 (disable_command): Ditto.
983 (enable_command): Ditto.
984 (delete_trace_command): Use user_breakpoint_p instead of looking
985 at the breakpoint number directly. When checking if there are
986 user visible tracepoints, in order to know whether to ask the user
987 for confirmation, check whether the breakpoint is actually a
990 2011-04-27 Vladimir Prus <vladimir@codesourcery.com>
992 * python/py-breakpoint.c (gdbpy_breakpoint_created): Fix
995 2011-04-27 Vladimir Prus <vladimir@codesourcery.com>
997 MI breakpoint notifications.
999 * annotate.c (breakpoint_changed): Adjust parameter type.
1000 * breakpoint.c (set_breakpoint_condition): Adjust to change
1001 in breakpoint_modified type.
1002 (breakpoint_set_commands): Likewise.
1003 (do_map_commands_command): Likewise.
1004 (bpstat_check_breakpoint_conditions): Notify that breakpoint has
1005 changed after bumping hit count.
1006 (bpstat_stop_status): Likewise.
1007 (print_one_breakpoint_location): Don't wrap in tuple here.
1008 (print_one_breakpoint): Always print individual locations.
1009 For locations, use unnamed tuple.
1010 (disable_breakpoints_in_unloaded_shlib): Notify that breakpoint
1012 (create_catchpoint, create_syscall_event_catchpoint): Call
1013 breakpoint_created obsever.
1014 (mention): Don't call breakpoint_created observer.
1015 (create_breakpoint_sal): Call breakpoint_created observer.
1016 (create_breakpoint, watch_command_1): Likewise.
1017 (create_ada_exception_breakpoint): Likewise.
1018 (delete_breakpoint): Call breakpoint_deleted breakpoint.
1019 (locations_are_equal): New.
1020 (update_breakpoint_locations): If locations were changed, notify.
1021 (set_ignore_count, disable_breakpoint, do_enable_breakpoint):
1022 Call breakpoint_modified observer.
1024 * mi/mi-cmd-break.c (breakpoint_notify): Adjust.
1025 (mi_cmd_break_insert): Don't set observers for modify and delete.
1026 * mi/mi-interp.c (mi_suppress_breakpoint_notifications): New.
1027 (mi_breakpoint_created, mi_breakpoint_deleted)
1028 (mi_breakpoint_modified): New.
1029 (mi_interpreter_init): Hook the above.
1030 * mi/mi-main.c (mi_cmd_execute): Disable breakpoint notifications
1031 while -break-* commands are executing.
1032 * mi/mi-main.h (mi_suppress_breakpoint_notifications): New.
1033 * mi/mi-out.c (struct ui_out_data): New field original_buffer.
1035 (mi_ui_out_impl): Hook in mi_redirect.
1036 (mi_field_skip): True to the name, skip the field, don't output
1037 a field with an empty value.
1039 * python/py-breakpoint.c (gdbpy_breakpoint_created)
1040 (gdbpy_breakpoint_deleted): Adjust.
1041 * tui/tui-hooks.c (tui_event_create_breakpoint)
1042 (tui_event_delete_breakpoint, tui_event_modify_breakpoint): Adjust.
1044 2011-04-26 Aleksandar Ristovski <aristovski@qnx.com>
1046 * nto-procfs.c (procfs_insert_hw_watchpoint): Fix prototype.
1047 (procfs_remove_hw_watchpoint): Likewise.
1049 2011-04-26 Michael Walle <michael@walle.cc>
1051 * remote.c (remote_start_remote): Ack packet after sending the
1054 2011-04-26 Yao Qi <yao@codesourcery.com>
1056 * linux-nat.c: Move common macros to ...
1057 Include linux-ptrace.h.
1058 * common/linux-ptrace.h: ... here. New.
1060 2011-04-25 Jan Kratochvil <jan.kratochvil@redhat.com>
1062 * elfread.c (elf_symfile_read): Protect dwarf2_initialize_objfile by
1063 !objfile_has_partial_symbols. New comment.
1064 * objfiles.c (objfile_has_partial_symbols): Call HAS_SYMBOLS if
1065 SYM_READ_PSYMBOLS is not present. Extend the comment.
1066 * symfile.h (struct sym_fns): Extend the sym_read_psymbols comment.
1068 2011-04-25 Jan Kratochvil <jan.kratochvil@redhat.com>
1070 * defs.h (ENUM_BITFIELD): Remove.
1072 2011-04-24 Jan Kratochvil <jan.kratochvil@redhat.com>
1073 Eli Zaretskii <eliz@gnu.org>
1075 * NEWS: Document the new gdbserver --once option.
1077 2011-04-21 Jie Zhang <jzhang918@gmail.com>
1079 * MAINTAINERS: Update my email address.
1081 2011-04-21 Pierre Muller <muller@ics.u-strasbg.fr>
1083 * gdb_wchar.h (USE_INTERMEDIATE_ENCODING_FUNCTION): New macro.
1084 (INTERMEDIATE_ENCODING): Change value to intermediate_encoding
1085 function call if __STDC_ISO_10646__ macro is defined.
1086 (intermediate_encoding): New prototype.
1087 * charset.c (your_gdb_wchar_t_is_bogus): New extern test variable
1088 to generate compile time error for unsupported gdb_wchar_t size.
1089 (ENDIAN_SUFFIX): New macro.
1090 (intermediate_encoding): New function.
1092 2011-04-20 Jan Kratochvil <jan.kratochvil@redhat.com>
1094 * ada-lang.c (struct add_partial_datum): Update the comment for
1095 expand_partial_symbol_name.
1096 (ada_add_partial_symbol_completions): Rename to ...
1097 (ada_expand_partial_symbol_name): ... here, change return type, update
1098 function comment, call symbol_completion_match instead of
1099 symbol_completion_add.
1100 (ada_make_symbol_completion_list): Use now expand_partial_symbol_names
1101 and ada_expand_partial_symbol_name.
1102 * dwarf2read.c (dw2_expand_symtabs_matching): Support NULL
1104 (dw2_map_symbol_names): Remove.
1105 (dwarf2_gdb_index_functions): Unlist dw2_map_symbol_names.
1106 * psymtab.c (map_symbol_names_psymtab): Remove.
1107 (expand_symtabs_matching_via_partial): Support NULL FILE_MATCHER.
1108 Support KIND == ALL_DOMAIN. Exchange the NAME_MATCHER and KIND check
1110 (psym_functions): Unlist map_symbol_names_psymtab.
1111 (map_partial_symbol_names): Rename to ...
1112 (expand_partial_symbol_names): ... here, change the FUN type, call
1113 expand_symtabs_matching with ALL_DOMAIN and NULL FILE_MATCHER now.
1114 * psymtab.h (map_partial_symbol_names): Rename to ...
1115 (expand_partial_symbol_names): ... here, change the FUN type.
1116 * symfile.h (struct quick_symbol_functions): Update the description of
1117 expand_symtabs_matching. Remove map_symbol_names.
1118 * symtab.c (search_symbols): Add ALL_DOMAIN to the function comment.
1119 (struct add_name_data): Update the comment for
1120 expand_partial_symbol_name.
1121 (add_partial_symbol_name): Rename to ...
1122 (expand_partial_symbol_name): ... here. Replace
1123 completion_list_add_name call by strncmp.
1124 (default_make_symbol_completion_list_break_on): Use now
1125 expand_partial_symbol_names and expand_partial_symbol_name.
1126 * symtab.h (enum search_domain): New element ALL_DOMAIN.
1128 2011-04-20 Tom Tromey <tromey@redhat.com>
1130 * dwarf2read.c (save_gdb_index_command): Replace format
1131 documentation with a pointer to the manual.
1133 2011-04-20 Pedro Alves <pedro@codesourcery.com>
1135 * regcache.c: Include remote.h.
1136 (enum regcache_dump_what) <regcache_dump_remote>: New enum value.
1137 (regcache_dump): Handle regcache_dump_remote.
1138 (maintenance_print_remote_registers): New function.
1139 (_initialize_regcache): Install "maint print remote-registers"
1141 * remote.c (map_regcache_remote_table): New function, factored out
1143 (init_remote_state): ... here.
1144 (remote_register_number_and_offset): New.
1145 * remote.h (remote_register_number_and_offset): Declare.
1147 2011-04-20 Pedro Alves <pedro@codesourcery.com>
1149 * regcache.c (get_thread_arch_regcache): If creating a regcache for
1150 null_ptid, assume and allow a NULL address space, instead of
1151 asking the target for the ptid's address space.
1152 * infrun.c (ptid_is_pid): Remove assertion.
1154 2011-04-19 Tom Tromey <tromey@redhat.com>
1156 * windows-tdep.c (windows_xfer_shared_library):
1157 * windows-nat.c (get_module_name, windows_make_so):
1158 * v850-tdep.c (v850_handle_pushm):
1159 * utils.c (null_cleanup, gdb_realpath):
1160 * ui-out.c (get_next_header):
1161 * tracepoint.c (clear_traceframe_info):
1162 * symtab.c (lookup_symtab):
1163 * serial.h (struct serial_ops):
1164 * mipsread.c (read_alphacoff_dynamic_symtab):
1165 * infcmd.c (print_return_value):
1166 * ia64-linux-tdep.c (ia64_linux_sigcontext_register_address):
1167 * f-exp.y (parse_number):
1168 * exceptions.c (catch_exceptions):
1169 * dummy-frame.c (dummy_frame_this_id):
1170 * defs.h (struct cleanup):
1171 * breakpoint.c (disable_breakpoints_in_unloaded_shlib):
1172 * arm-tdep.c (arm_push_dummy_call):
1173 * amd64-tdep.h (amd64_collect_xsave):
1174 * amd64-tdep.c (amd64_collect_xsave):
1175 * alpha-tdep.c (alpha_heuristic_frame_unwind_cache):
1176 * README (typing): Remove duplicate words.
1177 * cli/cli-decode.c (lookup_cmd_composition): Add comma.
1178 * infrun.c (siginfo_value_read): Fix typo.
1179 * solib-frv.c (frv_fdpic_find_global_pointer): Likewise.
1180 * top.c (source_line_number): Add comma.
1182 2011-04-19 Marc Khouzam <marc.khouzam@ericsson.com>
1184 * thread.c (any_live_thread_of_process): Prioritize threads
1185 that are not executing.
1186 * gdbthread.h (any_live_thread_of_process): Update comment
1187 as per above change.
1189 2011-04-19 Andreas Schwab <schwab@linux-m68k.org>
1191 * xcoffread.c (process_xcoff_symbol): Remove useless cast.
1192 (scan_xcoff_symtab): Likewise.
1194 2011-04-19 Pierre Muller <muller@ics.u-strasbg.fr>
1196 * xcoffread.c (process_xcoff_symbol): ARI fix: Avoid assignment
1199 2011-04-19 Pierre Muller <muller@ics.u-strasbg.fr>
1200 Pedro Alves <pedro@codesourcery.com>
1202 * xstormy16-tdep.c (xstormy16_push_dummy_call): Add local
1203 variables to simplify code and avoid == operator at end of
1204 line as this is against GNU coding standards.
1206 2011-04-19 Pierre Muller <muller@ics.u-strasbg.fr>
1208 * solib-svr4.c (svr4_keep_data_in_core): Rename local variable
1209 lm_name to name_lm to avoid conflict with lm_name function.
1211 2011-04-19 Pierre Muller <muller@ics.u-strasbg.fr>
1213 ARI fixes: Use only lowercase function name for static functions.
1214 * nto-tdep.c (LM_ADDR): Rename to...
1215 (lm_addr): New function name.
1216 (nto_relocate_section_addresses): Adapt to change above.
1217 * solib-sunos.c (LM_ADDR): Rename to...
1218 (lm_addr): New function name.
1219 (LM_NEXT): Rename to...
1220 (lm_next): New function name.
1221 (sunos_current_sos, sunos_relocate_section_addresses): Adapt to
1222 function name changes above.
1223 * solib-svr4.c (LM_ADDR_FROM_LINK_MAP): Rename to...
1224 (lm_addr_from_link_map): New function name.
1225 (HAS_LM_DYNAMIC_FROM_LINK_MAP): Rename to...
1226 (has_lm_dynamic_from_link_map): New function name.
1227 (LM_DYNAMIC_FROM_LINK_MAP): Rename to...
1228 (lm_dynamic_from_link_map): New function name.
1229 (LM_ADDR_CHECK): Rename to...
1230 (lm_addr_check): New function name.
1231 (LM_NEXT): Rename to...
1232 (lm_next): New function name.
1233 (LM_PREV): Rename to...
1234 (lm_prev): New function name.
1235 (LM_NAME): Rename to...
1236 (lm_name): New function name.
1237 (IGNORE_FIRST_LINK_MAP_ENTRY): Rename to...
1238 (ignore_first_link_map_entry): New function name.
1239 (svr4_keep_data_in_core): Adapt to function name changes above.
1240 (svr4_current_sos): Likewise.
1241 (enable_break): Likewise.
1242 (svr4_relocate_section_addresses): Likewise.
1244 2011-04-19 Pierre Muller <muller@ics.u-strasbg.fr>
1247 * xtensa-tdep.c (xtensa_register_type): Use xstrprintf instead of
1248 sprintf. Simplify code and avoid loosing memory.
1249 (xtensa_register_reggroup_p): Extract assignment out of IF clause.
1250 (call0_frame_cache): Remove && operator from end of line.
1252 2011-04-17 Jan Kratochvil <jan.kratochvil@redhat.com>
1254 Fix libraries displacement if they change whether they were prelinked.
1255 * solib-svr4.c (LM_ADDR_CHECK): Set L_ADDR even if the DYNAMIC pointer
1256 does not match. Comment why.
1258 2011-04-17 Jan Kratochvil <jan.kratochvil@redhat.com>
1260 * corelow.c: Include wrapper.h.
1261 (core_open): Call now gdb_target_find_new_threads.
1262 * wrapper.c: Include target.h.
1263 (gdb_target_find_new_threads): New.
1264 * wrapper.h (gdb_target_find_new_threads): New declaration.
1266 2011-04-17 Jan Kratochvil <jan.kratochvil@redhat.com>
1268 * linux-thread-db.c (find_new_threads_callback): Exit on zero TI_TID
1269 even if !TARGET_HAS_EXECUTION.
1271 2011-04-17 Jan Kratochvil <jan.kratochvil@redhat.com>
1273 Fix convert_code_addr_to_desc_addr for ppc64 files after eu-strip.
1274 * elfread.c (elf_symfile_read): New variable synth_abfd, pass it to
1275 bfd_get_synthetic_symtab.
1276 * jit.c (jit_register_code): Pass NULL to the new parameter parent.
1277 * machoread.c (macho_add_oso_symfile): Pass main_objfile to the new
1278 parameter parent, remove the call to add_separate_debug_objfile.
1279 * solib.c (solib_read_symbols): Pass NULL to the new parameter parent.
1280 * symfile-mem.c (symbol_file_add_from_memory): Likewise.
1281 * symfile.c (symbol_file_add_with_addrs_or_offsets): New parameter
1282 parent, new comment for it, call add_separate_debug_objfile for it.
1283 (symbol_file_add_separate): Pass objfile as the parameter parent,
1284 remove the call to add_separate_debug_objfile.
1285 (symbol_file_add_from_bfd): New parameter parent, pass it.
1286 (symbol_file_add): Pass NULL to the new parameter parent.
1287 * symfile.h (symbol_file_add_from_bfd): New parameter parent.
1289 2011-04-17 Jan Kratochvil <jan.kratochvil@redhat.com>
1291 * elfread.c (elf_symtab_read): Do not ignore .L symbols if they are
1294 2011-04-17 Jan Kratochvil <jan.kratochvil@redhat.com>
1296 Fix Python access to inlined frames.
1297 * python/py-frame.c (frapy_read_var): Find BLOCK using get_frame_block.
1298 * python/py-symbol.c (gdbpy_lookup_symbol): Likewise.
1300 2011-04-15 Tom Tromey <tromey@redhat.com>
1302 * dwarf2read.c (add_index_entry): Use VEC_last, not VEC_length.
1304 2011-04-15 Gary Benson <gbenson@redhat.com>
1306 * MAINTAINERS: Add myself to write-after-approval section.
1308 2011-04-14 Mike Frysinger <vapier@gentoo.org>
1310 * remote-sim.c (sim_command_completer): New function.
1311 (_initialize_remote_sim): Set completer to sim_command_completer.
1313 2011-04-13 Thiago Jung Bauermann <bauerman@br.ibm.com>
1315 * breakpoint.c (print_exception_catchpoint): Rename to ...
1316 (print_it_exception_catchpoint): ... this.
1317 (gnu_v3_exception_catchpoint_ops): Update with new name
1318 for print_it_exception_catchpoint.
1320 2011-04-13 Edjunior Machado <emachado@linux.vnet.ibm.com>
1322 * MAINTAINERS: Add myself for write after approval privileges.
1324 2011-04-13 Marek Polacek <mpolacek@redhat.com>
1326 * MAINTAINERS: Add myself as a write-after-approval maintainer.
1328 2011-04-13 Thiago Jung Bauermann <bauerman@br.ibm.com>
1330 * breakpoint.c (watch_command_1): Remove colon from exp_string.
1332 2011-04-13 Thiago Jung Bauermann <bauerman@br.ibm.com>
1334 * breakpoint.c (save_breakpoints): Verify whether
1335 breakpoint_ops.print_recreate is defined before calling it.
1337 2011-04-11 Gary Benson <gbenson@redhat.com>
1339 Fix failure with --enable-maintainer-mode.
1340 * Makefile.in (aclocal_m4_deps): Updated gnulib dependencies.
1342 2011-04-09 Jan Kratochvil <jan.kratochvil@redhat.com>
1345 * symtab.c (search_symbols): Reorder the KIND description in the
1346 function comment. Remove the unused 4th element of types, types2,
1347 types3 and types4. New gdb_assert on KIND.
1348 (symtab_symbol_info): Remove the unused 4th element of classnames.
1349 New gdb_assert on KIND.
1350 * symtab.h (enum search_domain): New warning in the enum comment.
1351 Assign numbers to the elements VARIABLES_DOMAIN, FUNCTIONS_DOMAIN and
1354 2011-04-09 Jan Kratochvil <jan.kratochvil@redhat.com>
1356 Fix crash of gdb save-index on a STABS file.
1357 * dwarf2read.c (write_psymtabs_to_index): Return also on no
1360 2011-04-09 Jan Kratochvil <jan.kratochvil@redhat.com>
1362 Fix DW_AT_accessibility compatibility with gcc-4.6+.
1363 * dwarf2read.c: Include ctype.h.
1364 (producer_is_gxx_lt_4_6, dwarf2_default_access_attribute): New
1366 (dwarf2_add_field): Fix new_field->accessibility by calling
1367 dwarf2_default_access_attribute. Restructure setting accessibility
1369 (dwarf2_add_member_fn): New variable accessibility. Fix fnp
1370 is_private and is_protected by calling
1371 dwarf2_default_access_attribute.
1373 2011-04-08 Kevin Buettner <kevinb@redhat.com>
1375 * rx-tdep.c (rx_frame_unwind): Add default_frame_unwind_stop_reason
1376 to the initialization.
1378 2011-04-08 Steve Ellcey <sje@cup.hp.com>
1380 * Add default_frame_unwind_stop_reason value to libunwind_frame_unwind
1383 2011-04-07 Pierre Muller <muller@ics.u-strasbg.fr>
1385 Remove support for old Cygwin 1.5 versions.
1386 * remote-fileio.c: Remove macros used to emulate new cygwin_conv_path
1387 function on old Cygwin version.
1388 * windows-nat.c: Remove cygwin version check and always define
1389 __USEWIDE for Cygwin compilation.
1391 2011-04-07 Yao Qi <yao@codesourcery.com>
1393 * arm-linux-tdep.c (arm_linux_copy_svc): Remove parameters INSN
1395 * arm-tdep.c (cleanup_svc): Handle variable instruction size.
1396 (arm_copy_svc): Remove parameters INSN and TO.
1397 (decode_svc_copro): Update caller.
1398 * arm-tdep.h (struct displaced_step_closure): Remove parameters
1399 from function pointer `copy_svc_os'.
1401 2011-04-07 Yao Qi <yao@codesourcery.com>
1403 * arm-tdep.c (cleanup_branch): Set a correct return address in
1404 LR for ARM and Thumb.
1406 2011-04-06 Jan Kratochvil <jan.kratochvil@redhat.com>
1409 * dictionary.c (dict_hash): Use SYMBOL_HASH_NEXT.
1410 * dwarf2read.c (mapped_index_string_hash): Refer to SYMBOL_HASH_NEXT
1411 in the function comment, a new note on values compatibility.
1412 * minsyms.c (msymbol_hash_iw, msymbol_hash): Use SYMBOL_HASH_NEXT.
1413 * symtab.h (SYMBOL_HASH_NEXT): New.
1415 2011-04-06 Thiago Jung Bauermann <bauerman@br.ibm.com>
1417 * ppc-linux-nat.c (check_condition): Add len output parameter.
1418 Set it based on the memory region referenced in the condition
1419 expression. Update all callers.
1421 2011-04-06 Jan Kratochvil <jan.kratochvil@redhat.com>
1423 Fix crash regression on systems featuring .gdb_index.
1424 * objfiles.c (free_objfile): Move the
1425 forget_cached_source_info_for_objfile call earlier. Comment it.
1426 Extend the comment for objfile_free_data.
1428 2011-04-06 Jan Kratochvil <jan.kratochvil@redhat.com>
1430 Fix regression of displaying the debug format.
1431 * buildsym.c (end_symtab): Set symtab's debugformat and producer from
1434 2011-04-04 Tom Tromey <tromey@redhat.com>
1436 * cli/cli-interp.c (struct captured_execute_command_args):
1438 (do_captured_execute_command): Remove.
1439 (safe_execute_command): Use TRY_CATCH.
1440 * cli/cli-script.c (struct wrapped_read_command_file_args):
1442 (wrapped_read_command_file): Remove.
1443 (script_from_file): Use TRY_CATCH.
1444 * exceptions.c (catch_exception): Remove.
1445 * exceptions.h (catch_exception): Remove.
1446 (deprecated_throw_reason): Update comment.
1447 * mi/mi-main.c (captured_mi_execute_command): Change 'data'
1448 argument to 'context'.
1449 (mi_execute_command): Use TRY_CATCH.
1450 * remote.c (struct start_remote_args): Remove.
1451 (remote_start_remote): Update; change arguments.
1452 (remote_open_1): Use TRY_CATCH.
1454 2011-04-04 Tom Tromey <tromey@redhat.com>
1456 * tracepoint.c (scope_info): Update.
1457 * symtab.c (decode_line_spec): Update.
1458 * python/python.c (gdbpy_decode_line): Update.
1459 * linespec.h (decode_line_1): Update.
1460 * linespec.c (decode_line_1): Remove 'not_found_ptr' argument.
1461 (decode_compound, find_method, symtab_from_filename)
1462 (decode_variable): Likewise.
1463 * cli/cli-cmds.c (edit_command): Update.
1464 (list_command): Update.
1465 * breakpoint.c (parse_breakpoint_sals): Remove 'not_found_ptr'
1467 (create_breakpoint): Update.
1468 (until_break_command): Update.
1469 (addr_string_to_sals): Update.
1470 (decode_line_spec_1): Update.
1472 2011-04-04 Tom Tromey <tromey@redhat.com>
1474 * breakpoint.c (struct captured_parse_breakpoint_args): Remove.
1475 (do_captured_parse_breakpoint): Remove.
1476 (create_breakpoint): `e' is now volatile. Remove `parse_args'.
1477 Use TRY_CATCH directly.
1479 2011-04-04 Tom Tromey <tromey@redhat.com>
1481 * symtab.h (free_symtab): Remove.
1482 (forget_cached_source_info_for_objfile): Declare.
1483 * symmisc.c (free_symtab): Remove.
1484 * source.c (forget_cached_source_info_for_objfile): New function.
1485 (forget_cached_source_info): Use it.
1486 * objfiles.c (free_objfile): Simplify check before calling
1487 clear_current_source_symtab_and_line. Call
1488 forget_cached_source_info_for_objfile.
1490 2011-04-04 Tom Tromey <tromey@redhat.com>
1492 * mdebugread.c (psymtab_to_symtab_1): Copy linetable to obstack.
1493 (new_symtab): Don't set `free_code' on symtab.
1494 (new_linetable): Properly handle size==0.
1495 * symtab.h (struct symtab) <free_code, free_func>: Remove.
1496 * symmisc.c (free_symtab): Don't free the linetable. Don't call
1498 * jv-lang.c (struct jv_per_objfile_data): New.
1499 (jv_per_objfile_free): Free the data.
1500 (get_dynamics_objfile): Allocate a jv_per_objfile_data.
1501 (get_java_class_symtab): Set the `dict' field on the
1502 jv_per_objfile_data.
1503 (free_class_block): Remove.
1504 * buildsym.c (end_symtab): Don't set `free_code' or `free_func' on
1507 2011-04-04 Tom Tromey <tromey@redhat.com>
1509 * symfile.c (reread_symbols): Update.
1510 * objfiles.h (struct objfile) <cp_namespace_symtab>: Remove
1512 * objfiles.c (allocate_objfile): Update.
1513 * cp-support.h (cp_check_possible_namespace_symbols): Don't
1515 * cp-namespace.c (lookup_symbol_file): Don't call
1516 lookup_possible_namespace_symbol.
1517 (initialize_namespace_symtab, get_possible_namespace_block)
1518 (free_namespace_block, cp_check_possible_namespace_symbols)
1519 (check_possible_namespace_symbols_loop)
1520 (check_one_possible_namespace_symbol)
1521 (lookup_possible_namespace_symbol): Remove.
1522 (maintenance_cplus_namespace): Replace with notice.
1523 (_initialize_cp_namespace): Deprecate `maint cplus namespace'.
1525 2011-04-04 Tom Tromey <tromey@redhat.com>
1527 * xcoffread.c (read_xcoff_symtab): Make `debugfmt' const.
1528 * symtab.h (struct symtab) <producer, debugformat>: Now const.
1529 * symmisc.c (free_symtab): Don't free debugformat.
1530 * buildsym.h (struct subfile) <producer, debugformat>: Now const.
1531 (record_debugformat, record_producer): Document.
1532 * buildsym.c (end_symtab): Don't save debugformat and producer
1534 (end_symtab): Don't free debugformat and producer fields.
1535 (record_debugformat): Don't call xstrdup.
1536 (record_producer): Likewise.
1538 2011-04-04 Tom Tromey <tromey@redhat.com>
1540 * source.c (find_source_lines): Remove LSEEK_NOT_LINEAR code.
1541 (source_line_charpos, source_charpos_line): Remove.
1543 2011-04-04 Tom Tromey <tromey@redhat.com>
1545 * symtab.h (domain_enum): Split in two...
1546 (enum search_domain): New.
1547 (search_symbols): Update.
1548 * symtab.c (print_symbol_info, symtab_symbol_info): Remove
1549 redundant declarations.
1550 (search_symbols): Change 'kind' argument to search_domain.
1552 (print_symbol_info): Likewise.
1553 (symtab_symbol_info): Likewise.
1554 * symfile.h (struct quick_symbol_functions)
1555 <pre_expand_symtabs_matching>: Change type of 'kind' argument.
1556 <expand_symtabs_matching>: Likewise.
1557 * psymtab.c (pre_expand_symtabs_matching_psymtabs): Update.
1558 (expand_symtabs_matching_via_partial): Update.
1559 * dwarf2read.c (dw2_pre_expand_symtabs_matching): Update.
1560 (dw2_expand_symtabs_for_function): Update.
1561 * block.h: Moved anonymous enum...
1562 * defs.h (enum block_enum): ... here. Now named.
1564 2011-04-03 Joel Brobecker <brobecker@adacore.com>
1566 GDB 7.3 branch created (branch timestamp: 2011-04-01 01:00 UTC)
1567 * version.in: Bump version to 7.3.50.20110403-cvs.
1569 2011-04-03 Joel Brobecker <brobecker@adacore.com>
1571 * NEWS: Create a new section for the next release branch.
1572 Rename the section of the current branch, now that it has
1575 2011-04-01 Ulrich Weigand <ulrich.weigand@linaro.org>
1577 * arm-tdep.c (arm_gdbarch_init): Enfore correct register number
1578 for "fpscr" in target description.
1580 2011-04-01 Jan Kratochvil <jan.kratochvil@redhat.com>
1582 * dwarf2read.c (find_slot_in_mapped_hash): New variable back_to,
1583 initialize it. Delay HASH initialization. Strip the part after open
1584 parenthesis for languages with qualifiers. Call do_cleanups.
1586 2011-04-01 Tom Tromey <tromey@redhat.com>
1588 * utils.c (report_command_stats): Don't print `-' for negative
1591 2011-04-01 Eric Botcazou <ebotcazou@adacore.com>
1593 * ada-lang.c (ada_is_simple_array_type, ada_value_slice_from_ptr)
1594 (ada_value_slice, empty_array, to_fixed_array_type): Deal with
1597 2011-04-01 Joel Brobecker <brobecker@adacore.com>
1599 * breakpoint.h (bpdisp_text): Add declaration.
1600 * breakpoint.c (bpdisp_text): Make non-static.
1601 * ada-lang.c: #include "mi/mi-common.h".
1602 (print_it_exception): Rewrite to improve GDB/MI output.
1604 2011-04-01 Pedro Alves <pedro@codesourcery.com>
1606 * arm-tdep.h (struct address_space): Add forward declaration.
1608 2011-04-01 Ulrich Weigand <ulrich.weigand@linaro.org>
1610 * arm-tdep.h (arm_insert_single_step_breakpoint): Add prototype.
1611 * arm-tdep.c (arm_override_mode): New global.
1612 (arm_pc_is_thumb): Respect arm_override_mode. Remove single-step
1613 execution mode heuristics.
1614 (thumb_get_next_pc_raw): Remove INSERT_BKTP argument; always insert
1615 second single-step breakpoint if needed, using
1616 arm_insert_single_step_breakpoint.
1617 (arm_get_next_pc_raw): Remove INSERT_BKTP argument. Only handle
1618 ARM execution mode, do not call thumb_get_next_pc_raw.
1619 (arm_get_next_pc): Encode execution mode in return value. Call
1620 either arm_get_next_pc_raw or thumb_get_next_pc_raw.
1621 (arm_insert_single_step_breakpoint): New function.
1622 (arm_software_single_step): Call it.
1623 * arm-linux-tdep.c (arm_linux_sigreturn_return_addr): Add IS_THUMB
1624 argument to return execution mode of sigreturn target.
1625 (arm_linux_syscall_next_pc): Use it.
1626 (arm_linux_copy_svc): Update call.
1627 (arm_linux_software_single_step): Call
1628 arm_insert_single_step_breakpoint.
1630 2011-03-31 Jan Kratochvil <jan.kratochvil@redhat.com>
1632 * dwarf2read.c (dwarf2_read_index): Fix .gdb_index version number in
1635 2011-03-31 Tom Tromey <tromey@redhat.com>
1637 * varobj.c (update_dynamic_varobj_children): Properly handle
1638 errors from iterator.
1640 2011-03-31 Jan Kratochvil <jan.kratochvil@redhat.com>
1642 * dwarf2read.c (dwarf2_name): Initialize DEMANGLED. Avoid demangling
1643 struct linkage name twice.
1645 2011-03-31 Tom Tromey <tromey@redhat.com>
1647 * python/py-prettyprint.c (print_stack_unless_memory_error): Add
1648 missing ">" to message.
1650 2011-03-31 Tom Tromey <tromey@redhat.com>
1652 * varobj.c (instantiate_pretty_printer): Remove duplicate
1655 2011-03-31 Ulrich Weigand <ulrich.weigand@linaro.org>
1657 * i386-tdep.c (i386_frame_prev_register): Unwind SP from memory
1658 if neither saved value nor register available (e.g. signal frame).
1660 2011-03-31 Thiago Jung Bauermann <bauerman@br.ibm.com>
1662 * macroexp.c (expand): Avoid uninitialized variable
1665 2011-03-31 Thiago Jung Bauermann <bauerman@br.ibm.com>
1667 * breakpoint.c (break_range_command): Fix typo in comment.
1669 2011-03-31 Thiago Jung Bauermann <bauerman@br.ibm.com>
1670 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
1672 Implement support for PowerPC BookE ranged breakpoints.
1673 * NEWS: Mention support for ranged breakpoints on embedded PowerPC.
1674 * breakpoint.h (struct bp_target_info) <length>: New member
1676 (struct breakpoint_ops) <breakpoint_hit>: Take struct bp_location
1677 instead of struct breakpoint as argument, and also add ASPACE
1678 and BP_ADDR arguments. Update all callers.
1679 (struct breakpoint_ops) <print_one_detail>: New method.
1680 (struct breakpoint) <addr_string_range_end>: New member variable.
1681 * breakpoint.c (breakpoint_location_address_match): Add function
1683 (insert_bp_location): Set bl->target_info.length.
1684 (breakpoint_here_p): Call breakpoint_location_address_match.
1685 (moribund_breakpoint_here_p): Likewise.
1686 (regular_breakpoint_inserted_here_p): Likewise.
1687 (breakpoint_thread_match): Likewise.
1688 (bpstat_stop_status): Likewise.
1689 (bpstat_check_location): Move call to
1690 breakpoint_ops.breakpoint_hit to the top.
1691 (print_one_breakpoint_location): Call
1692 breakpoint_ops.print_one_detail if available.
1693 (breakpoint_address_match_range): New function.
1694 (breakpoint_location_address_match): Likewise.
1695 (breakpoint_locations_match): Compare the length field of the
1697 (hw_breakpoint_used_count): Count resources used by all locations
1698 in a breakpoint, and use breakpoint_ops.resources_needed if
1700 (breakpoint_hit_ranged_breakpoint): New function.
1701 (resources_needed_ranged_breakpoint): Likewise.
1702 (print_it_ranged_breakpoint): Likewise.
1703 (print_one_ranged_breakpoint): Likewise.
1704 (print_one_detail_ranged_breakpoint): Likewise.
1705 (print_mention_ranged_breakpoint): Likewise.
1706 (print_recreate_ranged_breakpoint): Likewise.
1707 (ranged_breakpoint_ops): New structure.
1708 (find_breakpoint_range_end): New function.
1709 (break_range_command): Likewise.
1710 (delete_breakpoint): Free addr_string_range_end.
1711 (update_breakpoint_locations): Add SALS_END argument. Update
1712 all callers. Calculate breakpoint length if a non-zero SALS_END
1713 is given. Call breakpoint_locations_match instead of
1714 breakpoint_address_match.
1715 (reset_breakpoint): Find SaL of the end of the range if B is a
1717 (_initialize_breakpoint): Register break-range command.
1718 * defs.h (print_core_address): Add function prototype.
1719 * ppc-linux-nat.c (ppc_linux_ranged_break_num_registers): New
1721 (ppc_linux_insert_hw_breakpoint): Support ranged breakpoints.
1722 (ppc_linux_remove_hw_breakpoint): Likewise.
1723 (_initialize_ppc_linux_nat): Initialize
1724 to_ranged_break_num_registers.
1725 * target.c (update_current_target): Add comment about
1726 to_ranged_break_num_registers.
1727 (target_ranged_break_num_registers): New function.
1728 * target.h (struct target_ops) <to_ranged_break_num_registers>:
1730 (target_ranged_break_num_registers): Add function prototype.
1731 * ui-out.c (ui_out_field_core_addr): Move address-printing logic to ...
1732 * utils.c (print_core_address): ... here.
1734 2011-03-31 Ulrich Weigand <uweigand@de.ibm.com>
1736 * breakpoint.c (addr_string_to_sals): Avoid uninitialized
1737 variable compiler warning.
1739 2011-03-30 Thiago Jung Bauermann <bauerman@br.ibm.com>
1741 * breakpoint.c (breakpoint_re_set_one): Factor out breakpoint-resetting
1743 (re_set_breakpoint): ... to here ...
1744 (addr_string_to_sals): ... and here.
1746 2011-03-29 Pierre Muller <muller@ics.u-strasbg.fr>
1748 * Makefile.in (SFILES): Add missing C sources.
1749 (HFILES_NO_SRCDIR): Remove gdbserver subdirectory headers.
1750 Add missing headers.
1752 2011-03-29 Mike Frysinger <vapier@gentoo.org>
1754 * .gitignore: New file.
1756 2011-03-29 Mike Frysinger <vapier@gentoo.org>
1758 * NEWS: Mention new cfi device simulation.
1760 2011-03-29 Tom Tromey <tromey@redhat.com>
1762 * dwarf2read.c (fixup_partial_die): Handle linkage name on
1763 otherwise anonymous types.
1764 (dwarf2_name): Likewise.
1765 * valops.c (value_struct_elt_for_reference): Refine artificial
1766 type logic. Call error if j==-1.
1768 2011-03-29 Andreas Tobler <andreast-list@fgznet.ch>
1770 Fix false GCC warning.
1771 * infcall.c (find_function_addr): Initialize funaddr.
1773 2011-03-29 Pierre Muller <muller@ics.u-strasbg.fr>
1775 Fix mingw compilation with --enable-targets=all.
1776 * remote-mips.c (gdb_usleep.h): Include header.
1777 (mips_enter_debug): Use gdb_usleep instead of sleep.
1779 2011-03-28 Jan Kratochvil <jan.kratochvil@redhat.com>
1781 Support resolution of STT_GNU_IFUNC via breakpoints.
1782 * breakpoint.c (print_it_typical): Support bp_gnu_ifunc_resolver and
1783 bp_gnu_ifunc_resolver_return.
1784 (bpstat_what): Rename parameter to bs_head, new variable bs, adjust
1785 the loop. Support bp_gnu_ifunc_resolver and
1786 bp_gnu_ifunc_resolver_return. New comment after the loop. New loop
1787 for bp_gnu_ifunc_resolver and bp_gnu_ifunc_resolver_return
1789 (bptype_string, print_one_breakpoint_location): Support
1790 bp_gnu_ifunc_resolver and bp_gnu_ifunc_resolver_return.
1791 (user_settable_breakpoint): Return true also for
1792 bp_gnu_ifunc_resolver.
1793 (allocate_bp_location): Support bp_gnu_ifunc_resolver and
1794 bp_gnu_ifunc_resolver_return.
1795 (set_breakpoint_location_function): New parameter explicit_loc,
1796 describe it. Call find_pc_partial_function_gnu_ifunc with new
1797 variable IS_GNU_IFUNC and adjust the address for STT_GNU_IFUNC if
1798 EXPLICIT_LOC is not set.
1799 (set_raw_breakpoint): Set EXPLICIT_LOC for
1800 set_breakpoint_location_function.
1801 (clone_momentary_breakpoint): Use true for EXPLICIT_LOC of
1802 set_breakpoint_location_function.
1803 (mention): Support bp_gnu_ifunc_resolver and
1804 bp_gnu_ifunc_resolver_return.
1805 (add_location_to_breakpoint): Set EXPLICIT_LOC for
1806 set_breakpoint_location_function.
1807 (update_breakpoint_locations): Remove static.
1808 (breakpoint_re_set_one): Support bp_gnu_ifunc_resolver and
1809 bp_gnu_ifunc_resolver_return.
1810 * breakpoint.h (enum bptype): New fields bp_gnu_ifunc_resolver and
1811 bp_gnu_ifunc_resolver_return.
1812 (update_breakpoint_locations): New declaration.
1813 * elfread.c: Include gdbthread.h and regcache.h.
1814 (elf_gnu_ifunc_resolver_stop, elf_gnu_ifunc_resolver_return_stop): New
1816 (elf_gnu_ifunc_fns): Install them.
1817 * minsyms.c (stub_gnu_ifunc_resolver_stop)
1818 (stub_gnu_ifunc_resolver_return_stop): New functions.
1819 (stub_gnu_ifunc_fns): Install them.
1820 * symtab.h (struct gnu_ifunc_fns): New fields gnu_ifunc_resolver_stop
1821 and gnu_ifunc_resolver_return_stop.
1822 (gnu_ifunc_resolver_stop, gnu_ifunc_resolver_return_stop): New.
1824 2011-03-28 Jan Kratochvil <jan.kratochvil@redhat.com>
1826 STT_GNU_IFUNC reader implementation.
1827 * elfread.c: Include gdbtypes.h, value.h and infcall.h.
1828 (SYMBOL_GOT_PLT_SUFFIX, elf_rel_plt_read)
1829 (elf_objfile_gnu_ifunc_cache_data, struct elf_gnu_ifunc_cache)
1830 (elf_gnu_ifunc_cache_hash, elf_gnu_ifunc_cache_eq)
1831 (elf_gnu_ifunc_record_cache, elf_gnu_ifunc_resolve_by_cache)
1832 (elf_gnu_ifunc_resolve_by_got, elf_gnu_ifunc_resolve_name)
1833 (elf_gnu_ifunc_resolve_addr): New.
1834 (elf_symfile_read): Call elf_rel_plt_read.
1835 (elf_gnu_ifunc_fns): New.
1836 (_initialize_elfread): Initialize elf_objfile_gnu_ifunc_cache_data.
1837 Install elf_gnu_ifunc_fns.
1838 * infcall.c (find_function_return_type): New function.
1839 (find_function_addr): Resolve TYPE_GNU_IFUNC functions, if possible.
1840 * minsyms.c (stub_gnu_ifunc_resolve_addr)
1841 (stub_gnu_ifunc_resolve_name): New functions.
1842 (stub_gnu_ifunc_fns, gnu_ifunc_fns_p): New variables.
1843 * symtab.h (struct gnu_ifunc_fns, gnu_ifunc_resolve_addr)
1844 (gnu_ifunc_resolve_name, gnu_ifunc_fns_p): New.
1846 2011-03-28 Jan Kratochvil <jan.kratochvil@redhat.com>
1848 Code cleanup for later STT_GNU_IFUNC support.
1849 * infcall.c (find_function_addr): Remove variable code, use explicit
1850 dereferences for it. Move VALUE_TYPE initialization later.
1852 2011-03-28 Jan Kratochvil <jan.kratochvil@redhat.com>
1854 GDB find_pc_partial_function support for STT_GNU_IFUNC.
1855 * blockframe.c (cache_pc_function_is_gnu_ifunc): New variable.
1856 (clear_pc_function_cache): Clear it.
1857 (find_pc_partial_function): Rename to ...
1858 (find_pc_partial_function_gnu_ifunc): ... this function. New
1859 parameter is_gnu_ifunc_p, describe it. Set *IS_GNU_IFUNC_P.
1860 (find_pc_partial_function): New wrapper for this function.
1861 * symtab.h (find_pc_partial_function_gnu_ifunc): New declaration.
1863 2011-03-28 Jan Kratochvil <jan.kratochvil@redhat.com>
1865 GDB internal type support for STT_GNU_IFUNC.
1866 * elfread.c (record_minimal_symbol): Support mst_text_gnu_ifunc.
1867 (elf_symtab_read): Set mst_text_gnu_ifunc for
1868 BSF_GNU_INDIRECT_FUNCTION.
1869 * eval.c (evaluate_subexp_standard): Support TYPE_GNU_IFUNC.
1870 * gdbtypes.c (init_type): Support TYPE_FLAG_GNU_IFUNC,
1871 builtin_func_func, nodebug_text_gnu_ifunc_symbol and
1872 nodebug_got_plt_symbol.
1873 * gdbtypes.h (enum type_flag_value): New entry TYPE_FLAG_GNU_IFUNC.
1874 (TYPE_GNU_IFUNC): New.
1875 (struct main_type): New field flag_gnu_ifunc.
1876 (struct builtin_type): New field builtin_func_func.
1877 (struct objfile_type): New fields nodebug_text_gnu_ifunc_symbol and
1878 nodebug_got_plt_symbol.
1879 * minsyms.c (lookup_minimal_symbol_text): Support mst_text_gnu_ifunc.
1880 (in_gnu_ifunc_stub): New.
1881 (prim_record_minimal_symbol, find_solib_trampoline_target): Support
1883 * parse.c (write_exp_msymbol): New variable ifunc_msym. Detect and
1884 support mst_text_gnu_ifunc. Support mst_slot_got_plt.
1885 * solib-svr4.c (svr4_in_dynsym_resolve_code): Return true also for
1887 * symmisc.c (dump_msymbols): Support mst_text_gnu_ifunc.
1888 * symtab.c (search_symbols): Likewise.
1889 * symtab.h (enum minimal_symbol_type): New fields mst_text_gnu_ifunc
1890 and mst_slot_got_plt.
1891 (in_gnu_ifunc_stub): New declaration.
1893 2011-03-28 Jan Kratochvil <jan.kratochvil@redhat.com>
1895 Support a ring of related breakpoints.
1896 * breakpoint.c (watchpoint_del_at_next_stop): New, move here code from
1897 other functions, add gdb_assert.
1898 (update_watchpoint, watchpoint_check): Add gdb_assert. Use
1899 watchpoint_del_at_next_stop.
1900 (bpstat_check_watchpoint): Use watchpoint_del_at_next_stop.
1901 (bpstat_stop_status): Handle ring in related_breakpoint.
1902 (set_raw_breakpoint_without_location): Initialize ring in
1904 (delete_breakpoint): Handle ring in related_breakpoint, use
1905 watchpoint_del_at_next_stop.
1906 (map_breakpoint_numbers): Handle ring in related_breakpoint.
1908 2011-03-28 Tom Tromey <tromey@redhat.com>
1911 * dwarf2read.c (prepare_one_comp_unit): Don't call set_cu_language
1912 with `language_minimal'.
1914 2011-03-25 Ulrich Weigand <ulrich.weigand@linaro.org>
1916 * arm-tdep.c (arm_elf_make_msymbol_special): Use ARM_SYM_BRANCH_TYPE
1917 instead of checking for STT_ARM_TFUNC symbol type.
1919 2011-03-25 Tom Tromey <tromey@redhat.com>
1921 * linespec.c (symbol_found): Restore line-based result for
1922 non-LOC_LABEL symbols.
1924 2011-03-25 Kai Tietz <ktietz@redhat.com>
1926 * tui/tui-source.c (tui_set_source_content): Use filename_cmp
1927 instead of strcmp for comparison.
1928 (tui_source_is_displayed): Likewise.
1929 * tui/tui-winsource.c (tui_update_breakpoint_info): Likewise.
1931 2011-03-24 Mark Wielaard <mjw@redhat.com>
1933 * dwarf2read.c (lookup_signatured_type): Use DW_FORM_ref_sig8 in
1935 (skip_one_die): Use DW_FORM_ref_sig8, not DW_FORM_sig8.
1936 (find_partial_die_in_comp_unit): Likewise in comment.
1937 (read_attribute_value): Likewise.
1938 (lookup_die_type): Likewise.
1939 (dwarf_form_name): Likewise.
1940 (dump_die_shallow): Likewise.
1941 (follow_die_ref_or_sig): Likewise.
1943 2011-03-24 Tom Tromey <tromey@redhat.com>
1945 PR breakpoints/11816:
1946 * linespec.c (decode_line_1): Parse `function:label' linespecs.
1947 (decode_compound): Update.
1948 (find_function_symbol): New function.
1949 (decode_dollar): Update.
1950 (decode_label): Add 'function_symbol' parameter. Handle
1951 function-relative labels.
1952 (decode_variable): Update.
1953 (symbol_found): Add 'function_symbol' parameter. Use label's PC,
1954 not its line. Set `special_display' and canonical name for
1957 2011-03-24 Tom Tromey <tromey@redhat.com>
1959 * linespec.h (struct linespec_result) <special_display>: New
1961 * breakpoint.h (struct breakpoint) <display_canonical>: New
1963 * breakpoint.c (print_breakpoint_location): Respect
1965 (create_breakpoint_sal): Add 'display_canonical' parameter.
1966 (create_breakpoints_sal): Update.
1967 (create_breakpoint): Update.
1969 2011-03-24 Tom Tromey <tromey@redhat.com>
1971 * symtab.c (decode_line_spec): Update.
1972 * linespec.c (build_canonical_line_spec): Change type of
1974 (decode_line_2, decode_line_1, decode_objc, decode_compound)
1975 (find_method, decode_all_digits, decode_dollar, decode_label)
1976 (symbol_found): Likewise.
1977 (init_linespec_result): New function.
1978 * breakpoint.c (struct captured_parse_breakpoint_args)
1979 <canonical_p>: New field, replaces addr_string_p.
1980 (create_breakpoints_sal): Add 'canonical' parameter, replacing
1982 (parse_breakpoint_sals): Likewise.
1983 (do_captured_parse_breakpoint): Update.
1984 (create_breakpoint): Use struct linespec_result.
1985 (until_break_command): Update.
1986 (breakpoint_re_set_one): Update.
1987 (decode_line_spec_1): Update.
1988 * linespec.h (struct linespec_result): New.
1989 (init_linespec_result): Declare.
1991 2011-03-23 Pedro Alves <pedro@codesourcery.com>
1993 * regcache.c (regcache_raw_read): If the target didn't supply a
1994 given raw register, mark it as unavailable.
1996 2011-03-23 Kai Tietz <ktietz@redhat.com>
1998 * breakpoint.c (clear_command): Use filename_cmp
1999 instead of strcmp for comparison.
2000 * buildsym.c (watch_main_source_file_lossage): Likewise.
2001 (patch_subfile_names): Use IS_DIR_SEPARATOR instead of
2002 checking just for slash.
2003 * dbxread.c (read_dbx_symtab): Use lbasename instead of
2004 strrchr and filename_cmp instead of strcmp for filenames.
2005 (add_old_header_file): Use filename_cmp
2006 instead of strcmp for comparison.
2007 * exec.c (exec_set_section_address): Likewise.
2008 * macrotab.c (macro_lookup_inclusion): Likewise.
2009 (macro_lookup_inclusion): Likewise.
2010 * elfread.c (_initialize_elfread): Likewise.
2011 (elfstab_offset_sections): Likewise.
2012 (elfstab_offset_sections): Use lbasename instead of
2014 * mdebugread.c (parse_partial_symbols): Likewise.
2015 (arse_partial_symbols): Use filename_(n)cmp instead of
2016 str(n)cmp for comparison.
2017 * minsyms.c (lookup_minimal_symbol): Likewise.
2018 * psymtab.c (read_psymtabs_with_filename): Likewise.
2019 * solib.c (solib_read_symbols): Likewise.
2020 (reload_shared_libraries_1): Likewise.
2021 * symmisc.c (maintenance_print_symbols): Likewise.
2022 * symfile.c (separate_debug_file_exists): Likewise.
2023 (reread_symbols): Likewise.
2024 (find_separate_debug_file_by_debuglink): Likewise.
2025 * remote-fileio.c (remote_fileio_func_rename): Likewise.
2026 * source.c (add_path): Likewise.
2027 * symtab.c (filename_seen): Likewise.
2028 (file_matches): Likewise.
2029 (print_symbol_info): Likewise.
2030 (maybe_add_partial_symtab_filename): Likewise.
2031 (make_source_files_completion_list): Likewise.
2032 * xml-syscall.c (init_sysinfo): Likewise.
2033 * windows-nat.c (_initialize_check_for_gdb_ini): Use
2034 IS_DIR_SEPARATOR for checking for trailing path separator.
2036 2011-03-22 Jan Kratochvil <jan.kratochvil@redhat.com>
2038 * dwarf2expr.c (execute_stack_op): Handle DW_OP_GNU_entry_value. New
2039 label abort_expression.
2040 * dwarf2loc.c (dwarf2_evaluate_loc_desc_full): Handle
2041 DWARF_VALUE_OPTIMIZED_OUT.
2043 2011-03-22 Jan Kratochvil <jan.kratochvil@redhat.com>
2046 * c-typeprint.c (c_type_print_args): Change parameter show_artificial
2047 to linkage_name. Invert its value. Update the function comment.
2048 (c_type_print_varspec_suffix): Invert it at the caller.
2049 * dwarf2read.c (dwarf2_compute_name): Invert it at the caller.
2051 2011-03-22 Pedro Alves <pedro@codesourcery.com>
2053 * infcmd.c (post_create_inferior): Ignore NOT_AVAILABLE_ERROR
2054 errors when reading the `stop_pc'.
2055 * printcmd.c (pc_prefix): Use get_frame_pc_if_available instead of
2058 2011-03-22 Phil Muldoon <pmuldoon@redhat.com>
2060 * NEWS: Document gdb.Write stream keyword.
2062 2011-03-22 Jan Kratochvil <jan.kratochvil@redhat.com>
2065 2011-03-21 Jan Kratochvil <jan.kratochvil@redhat.com>
2066 * dwarf2read.c (producer_is_gxx_lt_4_6): New function.
2067 (dwarf2_add_field): Fix new_field->accessibility for
2068 cu->header.version >= 3 while verifying also producer_is_gxx_lt_4_6.
2070 2011-03-22 Phil Muldoon <pmuldoon@redhat.com>
2074 * python/py-function.c (fnpy_call): Treat GdbErrors differently to
2075 other error classes. Do not print stack trace.
2077 2011-03-21 Jan Kratochvil <jan.kratochvil@redhat.com>
2079 * dwarf2read.c (producer_is_gxx_lt_4_6): New function.
2080 (dwarf2_add_field): Fix new_field->accessibility for
2081 cu->header.version >= 3 while verifying also producer_is_gxx_lt_4_6.
2083 2011-03-21 Ulrich Weigand <ulrich.weigand@linaro.org>
2085 * arm-tdep.c (arm_analyze_prologue): Do not abort parsing when
2086 encountering a load via a non-SP register.
2088 2011-03-21 Ulrich Weigand <uweigand@de.ibm.com>
2090 * tramp-frame.c (tramp_frame_prepend_unwinder): Set stop_reason
2091 field in returned unwinder.
2093 2012-03-21 Jan Kratochvil <jan.kratochvil@redhat.com>
2095 * ada-lang.c (replace_operator_with_call): Copy also GDBARCH.
2097 2012-03-21 Joel Brobecker <brobecker@adacore.com>
2099 * ada-lang.c (replace_operator_with_call): Use xzalloc instead
2102 2012-03-18 Pedro Alves <pedro@codesourcery.com>
2104 * frame.c (frame_unwind_register): Throw an error if unwinding the
2106 * get_prev_frame_1 (get_prev_frame_1): Ask the unwinder if there's
2107 an unwind stop reason.
2108 (frame_stop_reason_string): Handle UNWIND_UNAVAILABLE.
2109 * frame.h (enum unwind_stop_reason) <UNWIND_OUTERMOST,
2110 UNWIND_UNAVAILABLE>: New.
2111 * inline-frame.c (inline_frame_unwind): Install
2112 default_frame_unwind_stop_reason.
2113 * frame-unwind.c: Include "exceptions.h".
2114 (frame_unwind_find_by_frame): Swallow NOT_AVAILABLE_ERROR errors.
2115 (default_frame_unwind_stop_reason): New.
2116 * frame-unwind.h (frame_unwind_stop_reason_ftype): New typedef.
2117 (default_frame_unwind_stop_reason): Declare.
2118 (struct frame_unwind) <stop_reason>: New function pointer.
2120 * dummy-frame.c: Install default_frame_unwind_stop_reason.
2121 * dwarf2-frame.c: Include exceptions.h.
2122 (struct dwarf2_frame_cache) <unavailable_retaddr>: New field.
2123 (dwarf2_frame_cache): Swallow NOT_AVAILABLE_ERROR errors when
2124 computing the CFA. If such an error was thrown, set
2125 unavailable_retaddr.
2126 (dwarf2_frame_unwind_stop_reason): New.
2127 (dwarf2_frame_this_id): Don't build a frame id if the CFA was
2129 (dwarf2_frame_unwind): Install dwarf2_frame_unwind_stop_reason.
2130 (dwarf2_signal_frame_unwind): Ditto.
2132 * amd64-tdep.c: Include "exceptions.h".
2133 (struct amd64_frame_cache): New field "base_p".
2134 (amd64_init_frame_cache): Clear it.
2135 (amd64_frame_cache_1): New, factored out from amd64_frame_cache.
2136 Avoid reading registers with functions that throw if the register
2137 is not necessary to compute the frame base.
2138 (amd64_frame_cache): Reimplement wrapping amd64_frame_cache_1, and
2139 swallowing NOT_AVAILABLE_ERROR.
2140 (amd64_frame_unwind_stop_reason): New.
2141 (amd64_frame_this_id): Don't build a frame id if the frame base
2143 (amd64_frame_unwind): Install amd64_frame_unwind_stop_reason.
2144 (amd64_sigtramp_frame_cache): Swallow NOT_AVAILABLE_ERROR, and set
2145 base_p if the frame base was computable.
2146 (amd64_sigtramp_frame_unwind_stop_reason): New.
2147 (amd64_sigtramp_frame_this_id): Don't build a frame id if the
2148 frame base was unavailable.
2149 (amd64_sigtramp_frame_unwind): Install
2150 amd64_sigtramp_frame_unwind_stop_reason.
2151 (amd64_epilogue_frame_cache): Swallow NOT_AVAILABLE_ERROR, and set
2152 base_p if the frame base was computable.
2153 (amd64_epilogue_frame_unwind_stop_reason): New.
2154 (amd64_epilogue_frame_this_id): Don't build a frame id if the
2155 frame base was unavailable.
2156 (amd64_epilogue_frame_unwind): Install
2157 amd64_epilogue_frame_unwind_stop_reason.
2158 * i386-tdep.c: Include "exceptions.h".
2159 (struct i386_frame_cache): New field "base_p".
2160 (i386_init_frame_cache): Clear it.
2161 (i386_frame_cache_1): New, factored out from amd64_frame_cache.
2162 Avoid reading registers with functions that throw if the register
2163 is not necessary to compute the frame base.
2164 (i386_frame_cache): Reimplement wrapping amd64_frame_cache_1, and
2165 swallowing NOT_AVAILABLE_ERROR.
2166 (i386_frame_unwind_stop_reason): New.
2167 (i386_frame_this_id): Don't build a frame id if the frame base was
2169 (i386_frame_prev_register): Handle unavailable SP.
2170 (i386_frame_unwind): Install i386_frame_unwind_stop_reason.
2171 (i386_epilogue_frame_cache): Swallow NOT_AVAILABLE_ERROR, and set
2172 base_p if the frame base was computable.
2173 (i386_epilogue_frame_unwind_stop_reason): New.
2174 (i386_epilogue_frame_this_id): Don't build a frame id if the frame
2175 base was unavailable.
2176 (i386_epilogue_frame_unwind): Install
2177 i386_epilogue_frame_unwind_stop_reason.
2178 (i386_sigtramp_frame_cache): Swallow NOT_AVAILABLE_ERROR, and set
2179 base_p if the frame base was computable.
2180 (i386_sigtramp_frame_unwind_stop_reason): New.
2181 (i386_sigtramp_frame_this_id): Don't build a frame id if the frame
2182 base was unavailable.
2183 (i386_sigtramp_frame_unwind): Install
2184 i386_sigtramp_frame_unwind_stop_reason.
2185 * sentinel-frame.c (sentinel_frame_prev_register): Use the value
2186 type's size, not the register's.
2187 (sentinel_frame_unwind): Install default_frame_unwind_stop_reason.
2189 * alpha-mdebug-tdep.c (alpha_mdebug_frame_unwind): Install
2190 default_frame_unwind_stop_reason.
2191 * alpha-tdep.c (alpha_sigtramp_frame_unwind)
2192 (alpha_heuristic_frame_unwind): Ditto.
2193 * amd64obsd-tdep.c (amd64obsd_trapframe_unwind): Ditto.
2194 * arm-tdep.c (arm_prologue_unwind, arm_stub_unwind): Ditto.
2195 * avr-tdep.c (avr_frame_unwind): Ditto.
2196 * cris-tdep.c (cris_sigtramp_frame_unwind, cris_frame_unwind):
2198 * frv-linux-tdep.c (frv_linux_sigtramp_frame_unwind): Ditto.
2199 * frv-tdep.c (frv_frame_unwind): Ditto.
2200 * h8300-tdep.c (h8300_frame_unwind): Ditto.
2201 * hppa-hpux-tdep.c (hppa_hpux_sigtramp_frame_unwind): Ditto.
2202 * hppa-linux-tdep.c (hppa_linux_sigtramp_frame_unwind): Ditto.
2203 * hppa-tdep.c (hppa_frame_unwind, hppa_fallback_frame_unwind)
2204 (hppa_stub_frame_unwind): Ditto.
2205 * i386obsd-tdep.c (i386obsd_trapframe_unwind): Ditto.
2206 * ia64-tdep.c (ia64_frame_unwind, ia64_sigtramp_frame_unwind)
2207 (ia64_libunwind_frame_unwind)
2208 (ia64_libunwind_sigtramp_frame_unwind): Ditto.
2209 * iq2000-tdep.c (iq2000_frame_unwind): Ditto.
2210 * lm32-tdep.c (lm32_frame_unwind): Ditto.
2211 * m32c-tdep.c (m32c_unwind): Ditto.
2212 * m32r-linux-tdep.c (m32r_linux_sigtramp_frame_unwind): Ditto.
2213 * m32r-tdep.c (m32r_frame_unwind): Ditto.
2214 * m68hc11-tdep.c (m68hc11_frame_unwind): Ditto.
2215 * m68k-tdep.c (m68k_frame_unwind): Ditto.
2216 * m68klinux-tdep.c (m68k_linux_sigtramp_frame_unwind): Ditto.
2217 * m88k-tdep.c (m88k_frame_unwind): Ditto.
2218 * mep-tdep.c (mep_frame_unwind): Ditto.
2219 * microblaze-tdep.c (microblaze_frame_unwind): Ditto.
2220 * mips-tdep.c (mips_insn16_frame_unwind, mips_insn32_frame_unwind)
2221 (mips_stub_frame_unwind): Ditto.
2222 * mn10300-tdep.c (mn10300_frame_unwind): Ditto.
2223 * moxie-tdep.c (moxie_frame_unwind): Ditto.
2224 * mt-tdep.c (mt_frame_unwind): Ditto.
2225 * ppc-linux-tdep.c (ppu2spu_unwind): Ditto.
2226 * ppcobsd-tdep.c (ppcobsd_sigtramp_frame_unwind): Ditto.
2227 * rs6000-tdep.c (rs6000_frame_unwind): Ditto.
2228 * s390-tdep.c (s390_frame_unwind, s390_stub_frame_unwind)
2229 (s390_sigtramp_frame_unwind): Ditto.
2230 * score-tdep.c (score_prologue_unwind): Ditto.
2231 * sh-tdep.c (sh_frame_unwind): Ditto.
2232 * sh64-tdep.c (sh64_frame_unwind): Ditto.
2233 * sparc-sol2-tdep.c (sparc32_sol2_sigtramp_frame_unwind): Ditto.
2234 * sparc-tdep.c (sparc32_frame_unwind): Ditto.
2235 * sparc64-sol2-tdep.c (sparc64_sol2_sigtramp_frame_unwind): Ditto.
2236 * sparc64-tdep.c (sparc64_frame_unwind): Ditto.
2237 * sparc64fbsd-tdep.c (sparc64fbsd_sigtramp_frame_unwind): Ditto.
2238 * sparc64nbsd-tdep.c (sparc64nbsd_sigcontext_frame_unwind): Ditto.
2239 * sparc64obsd-tdep.c (sparc64obsd_frame_unwind)
2240 (sparc64obsd_trapframe_unwind): Ditto.
2241 * sparcnbsd-tdep.c (sparc32nbsd_sigcontext_frame_unwind): Ditto.
2242 * sparcobsd-tdep.c (sparc32obsd_sigtramp_frame_unwind): Ditto.
2243 * spu-tdep.c (spu_frame_unwind, spu2ppu_unwind): Ditto.
2244 * v850-tdep.c (v850_frame_unwind): Ditto.
2245 * vax-tdep.c (vax_frame_unwind): Ditto.
2246 * vaxobsd-tdep.c (vaxobsd_sigtramp_frame_unwind): Ditto.
2247 * xstormy16-tdep.c (frame_unwind xstormy16_frame_unwind): Ditto.
2248 * xtensa-tdep.c (xtensa_unwind): Ditto.
2250 2011-03-18 Pedro Alves <pedro@codesourcery.com>
2252 * tui/tui-hooks.c (tui_selected_frame_level_changed_hook): Assume
2253 there's always a frame. Use get_frame_pc_if_available instead of
2254 get_frame_pc, and if there's no PC available, don't look up a
2257 2011-03-18 Pedro Alves <pedro@codesourcery.com>
2259 * stack.c (print_frame_local_vars, print_frame_arg_vars): Handle
2262 2011-03-18 Pedro Alves <pedro@codesourcery.com>
2264 * tracepoint.c (set_traceframe_context): Handle unavailable PC
2267 2011-03-18 Pedro Alves <pedro@codesourcery.com>
2269 * frame.h (frame_unwind_caller_pc_if_available): Declare.
2270 * frame.c (frame_unwind_caller_pc_if_available): New.
2271 * stack.c (frame_info): Handle unavailable PC.
2273 2011-03-18 Pedro Alves <pedro@codesourcery.com>
2275 * frame.c (frame_unwind_pc): Rename to ...
2276 (frame_unwind_pc_if_available): ... this. New `pc' output
2277 parameter. Change return type to int. Gracefully handle
2278 gdbarch_unwind_pc throwing NOT_AVAILABLE_ERROR. Return 0 if that
2279 happened, or 1 otherwise.
2280 (frame_unwind_pc): Reimplement on top of
2281 frame_unwind_pc_if_available.
2282 (get_frame_func): Rename to ...
2283 (get_frame_func_if_available): New `pc' output parameter. Change
2284 return type to int. Gracefully handle the PC not being available.
2285 (get_frame_func): Reimplement on top of
2286 get_frame_func_if_available.
2287 (select_frame): Handle the PC being unavailable.
2288 (get_prev_frame): Handle the PC being unavailable.
2289 (get_frame_pc_if_available): New.
2290 (get_frame_address_in_block_if_available): New.
2291 (find_frame_sal): Handle the frame PC not being available.
2292 * frame.h (get_frame_pc_if_available): Declare.
2293 (get_frame_address_in_block_if_available): Declare.
2294 (get_frame_func_if_available): Declare.
2295 * stack.c (print_frame_info): Handle the PC being unavailable.
2296 (find_frame_funname): Ditto.
2297 (print_frame): Handle the PC being unavailable.
2298 (get_frame_language): Ditto.
2299 * blockframe.c (get_frame_block): Ditto.
2300 * macroscope.c (default_macro_scope): Ditto.
2301 * tui/tui-stack.c (tui_show_frame_info): Ditto.
2303 2011-03-18 Pedro Alves <pedro@codesourcery.com>
2305 * dwarf2loc.c (dwarf2_evaluate_loc_desc): Catch
2306 NOT_AVAILABLE_ERROR when evaluating the location expression.
2308 2011-03-18 Pedro Alves <pedro@codesourcery.com>
2310 * dwarf2loc.c (read_pieced_value): Handle get_frame_register_bytes
2311 returning that the register piece is unavailable/optimized out.
2312 (write_pieced_value): Handle get_frame_register_bytes returning
2313 that the register piece is unavailable/optimized out when doing a
2314 read-modify write of a bitfield.
2315 * findvar.c (value_from_register): Handle get_frame_register_bytes
2316 returning that the register piece is unavailable/optimized out.
2317 * frame.c (get_frame_register_bytes): New parameters `optimizedp'
2318 and `unavailablep'. Throw error on bad debug info. Use
2319 frame_register instead of frame_register_read, to fill in the new
2321 * frame.h (get_frame_register_bytes): New parameters `optimizedp'
2323 * valops.c: (value_assign): Adjust, and handle
2324 get_frame_register_bytes failing.
2325 * spu-tdep.c: Include exceptions.h.
2326 (spu_software_single_step): Adjust, and handle
2327 get_frame_register_bytes failing.
2328 (spu_get_longjmp_target): Ditto.
2329 * gdbarch.sh (register_to_value): Change to return int. New
2330 parameters `optimizedp' and `unavailablep'.
2331 * gdbarch.h, gdbarch.c: Regenerate.
2332 * i386-tdep.c (i386_register_to_value): Adjust to new
2333 gdbarch_register_to_value interface.
2334 * i387-tdep.c (i387_register_to_value): Ditto.
2335 * i387-tdep.h (i387_register_to_value): Ditto.
2336 * alpha-tdep.c (alpha_register_to_value): Ditto.
2337 * ia64-tdep.c (ia64_register_to_value): Ditto.
2338 * m68k-tdep.c (m68k_register_to_value): Ditto.
2339 * mips-tdep.c (mips_register_to_value): Ditto.
2340 * rs6000-tdep.c (rs6000_register_to_value): Ditto.
2342 2011-03-18 Pedro Alves <pedro@codesourcery.com>
2344 * findvar.c (value_of_register): Mark the value as unavailable, if
2345 the register is unavailable.
2346 * frame.h (frame_register_unwind): New `unavailablep' parameter.
2347 (frame_register): New `unavailablep' parameter.
2348 (frame_register_read): Update comment.
2349 * frame.c (frame_register_unwind): New `unavailablep' parameter.
2350 Set it if the register is unavailable. If the register is
2351 unavailable, clear the output buffer.
2352 (frame_register): New `unavailablep' parameter. Pass it down.
2353 (frame_unwind_register): Adjust.
2354 (put_frame_register): Adjust.
2355 (frame_register_read): Adjust. Also return false if the register
2357 (frame_register_unwind_location): Adjust.
2358 * sentinel-frame.c (sentinel_frame_prev_register): If the register
2359 is unavailable, mark the value accordingly.
2360 * stack.c (frame_info): Handle unavailable registers.
2362 2011-03-18 Pedro Alves <pedro@codesourcery.com>
2364 * mi/mi-main.c (register_changed_p): Handle REG_UNAVAILABLE, and
2365 simplify, using regcache_cooked_read.
2367 2011-03-18 Pedro Alves <pedro@codesourcery.com>
2369 * regcache.h (regcache_raw_read, regcache_raw_read_signed)
2370 (regcache_raw_read_unsigned, regcache_raw_read_signed)
2371 (regcache_raw_read_unsigned, regcache_raw_read_part)
2372 (regcache_cooked_read, regcache_cooked_read_signed)
2373 (regcache_cooked_read_unsigned, regcache_cooked_read_part)
2374 (regcache_cooked_read_ftype): Change return to enum
2376 * regcache.c: Include exceptions.h
2377 (regcache_save): Adjust to handle REG_UNAVAILABLE registers.
2378 (do_cooked_read): Change return to enum register_status. Always
2379 forward to regcache_cooked_read.
2380 (regcache_raw_read): Change return to enum register_status. If
2381 the register is not REG_VALID, memset the buffer. Return the
2383 (regcache_raw_read_signed): Handle non-REG_VALID registers and
2384 return the register's status.
2385 (regcache_raw_read_unsigned): Ditto.
2386 (regcache_cooked_read): Change return to enum register_status.
2387 Assert that with read-only regcaches, the register's status must
2388 be known. If the regcache is read-only, and the register is not
2389 REG_VALID, memset the buffer. Return the register's status.
2390 (regcache_cooked_read_signed): Change return to enum
2391 register_status. Handle non-REG_VALID registers and return the
2393 (regcache_cooked_read_unsigned): Change return to enum
2394 register_status. Handle non-REG_VALID registers and return the
2396 (regcache_xfer_part, regcache_raw_read_part)
2397 (regcache_cooked_read_part): Change return to enum
2398 register_status. Return the register's status.
2399 (regcache_read_pc): Throw NOT_AVAILABLE_ERROR if the register is
2401 (regcache_dump): Handle unavailable cooked registers.
2402 * frame.c (do_frame_register_read): Adjust interface to match
2403 regcache_cooked_read_ftype.
2404 * gdbarch.sh (pseudo_register_read): Change return to enum
2406 * gdbarch.h, gdbarch.c: Regenerate.
2408 * i386-tdep.h (i386_pseudo_register_read): Change return to enum
2410 * i386-tdep.c (i386_pseudo_register_read): Change return to enum
2411 register_status. If reading a raw register indicates the raw
2412 register is not valid, return the raw register's status,
2413 otherwise, return REG_VALID.
2414 * amd64-tdep.c (amd64_pseudo_register_read): Change return to enum
2415 register_status. Handle non-REG_VALID raw registers and return
2416 the register's status.
2417 * arm-tdep.c (arm_neon_quad_read)
2418 (arm_pseudo_read): Change return to enum register_status. Handle
2419 non-REG_VALID raw registers and return the register's status.
2420 * avr-tdep.c (avr_pseudo_register_read): Ditto.
2421 * frv-tdep.c (frv_pseudo_register_read): Ditto.
2422 * h8300-tdep.c (h8300_pseudo_register_read): Ditto.
2423 * hppa-tdep.c (hppa_pseudo_register_read): Ditto.
2424 * m32c-tdep.c (m32c_move_reg_t): Change return to enum
2426 (m32c_raw_read, m32c_raw_write, m32c_banked_read)
2427 (m32c_banked_write, m32c_sb_read, m32c_sb_write, m32c_part_read)
2428 (m32c_part_write, m32c_cat_read, m32c_cat_write)
2429 (m32c_r3r2r1r0_read, m32c_r3r2r1r0_write)
2430 (m32c_pseudo_register_read): Change return to enum
2431 register_status. Adjust.
2432 * m68hc11-tdep.c (m68hc11_pseudo_register_read): Change return to
2433 enum register_status. Return the register's status.
2434 * mep-tdep.c (mep_pseudo_cr32_read): Change return to enum
2435 register_status. Return the register's status.
2436 (mep_pseudo_cr64_read, mep_pseudo_register_read): Ditto.
2437 * mips-tdep.c (mips_pseudo_register_read): Ditto.
2438 * mt-tdep.c (mt_pseudo_register_read): Ditto.
2439 * rs6000-tdep.c (move_ev_register_func): New typedef.
2440 (e500_move_ev_register): Use it. Change return to enum
2441 register_status. Return the register's status.
2442 (do_regcache_raw_read): New function.
2443 (do_regcache_raw_write): New function.
2444 (e500_pseudo_register_read): Change return to enum
2445 register_status. Return the register's status. Use
2446 do_regcache_raw_read.
2447 (e500_pseudo_register_write): Adjust. Use do_regcache_raw_write.
2448 (dfp_pseudo_register_read): Change return to enum register_status.
2449 Return the register's status.
2450 (vsx_pseudo_register_read): Ditto.
2451 (efpr_pseudo_register_read): Ditto.
2452 (rs6000_pseudo_register_read): Ditto.
2453 * s390-tdep.c (s390_pseudo_register_read): Change return to enum
2454 register_status. Return the register's status.
2455 * sh64-tdep.c (pseudo_register_read_portions): New function.
2456 (sh64_pseudo_register_read): Change return to enum
2457 register_status. Use pseudo_register_read_portions. Return the
2459 * ia64-tdep.c (ia64_pseudo_register_read): Change return to enum
2460 register_status. Return the register's status.
2461 * sh-tdep.c (pseudo_register_read_portions): New function.
2462 (sh_pseudo_register_read): Change return to enum register_status.
2463 Use pseudo_register_read_portions. Return the register's status.
2464 * sparc-tdep.c (sparc32_pseudo_register_read): Change return to
2465 enum register_status. Return the register's status.
2466 * sparc64-tdep.c (sparc64_pseudo_register_read): Ditto.
2467 * spu-tdep.c (spu_pseudo_register_read_spu)
2468 (spu_pseudo_register_read): Ditto.
2469 * xtensa-tdep.c (xtensa_register_read_masked)
2470 (xtensa_pseudo_register_read): Ditto.
2471 * bfin-tdep.c (bfin_pseudo_register_read): Ditto.
2473 2011-03-18 Pierre Muller <muller@ics.u-strasbg.fr>
2475 * python/py-value.c (valpy_getitem): Fix formatting of error function
2478 2011-03-18 Pierre Muller <muller@ics.u-strasbg.fr>
2480 ARI fixes: Add missing internationalization markups throughout
2482 * darwin-nat-info.c: Ditto.
2485 * mi/mi-main.c: Ditto.
2487 2011-03-18 Pierre Muller <muller@ics.u-strasbg.fr>
2489 ARI fixes: Add missing internationalization markups throughout
2492 * cp-name-parser.y: Ditto.
2495 * objc-exp.y: Ditto.
2498 2011-03-18 Pierre Muller <muller@ics.u-strasbg.fr>
2500 ARI fixes: Messages should have no trailing new lines.
2501 * darwin-nat.c (mach_check_error): Remove trailing new line from
2502 warning function call message.
2503 * record.c (bfdcore_read): Idem for error call.
2505 2011-03-18 Pierre Muller <muller@ics.u-strasbg.fr>
2507 * common/signals.c (target_signal_from_host): Add _ markup to error
2508 function call message.
2509 (target_signal_to_host): Add _ markup and remove trailing new line
2510 from warning call message.
2511 (target_signal_from_command): Add _ markup to error function call
2514 2011-03-18 Phil Muldoon <pmuldoon@redhat.com>
2518 * python/python.c (gdbpy_write): Accept a stream argument and
2519 operate to the appropriate stream.
2520 (gdbpy_flush): Likewise.
2521 (_initialize_python): Add stream constants.
2522 (finish_python_initialization): Add GdbOutputErrorFile class.
2524 2011-03-18 Kwok Cheung Yeung <kcy@codesourcery.com>
2526 * MAINTAINERS: Add myself as a write-after-approval maintainer.
2528 2011-03-18 Kwok Cheung Yeung <kcy@codesourcery.com>
2530 * amd64-tdep.c (amd64_relocate_instruction): Fix ordering of arguments
2531 to store_signed_integer. Add debug message when relocating CALL
2532 instructions. Fix formatting of debug message.
2533 * i386-tdep.c (i386_relocate_instruction): Ditto.
2535 2011-03-17 Joel Brobecker <brobecker@gnat.com>
2537 * target.h (struct target_ops): Remove to_lookup_symbol field.
2538 (target_lookup_symbol): Delete macro.
2539 * target.c (nosymbol, debug_to_lookup_symbol): Delete.
2540 (update_current_target, setup_target_debug): Remove handling
2541 of to_lookup_symbol target_ops field.
2542 * ada-tasks.c (get_known_tasks_addr): Remove use of
2543 target_lookup_symbol.
2544 * coffread.c (coff_symtab_read): Likewise.
2545 * dbxread.c (read_dbx_symtab): Ditto.
2547 2011-03-17 Joel Brobecker <brobecker@gnat.com>
2550 * configure.ac: Add getthrds declaration check.
2551 * configure, config.in: Regenerate.
2552 * aix-thread.c (getthrds): Declare only if not already declared
2553 in procinfo.h. More declaration out of get_signaled_thread to
2556 2011-03-17 Phil Muldoon <pmuldoon@redhat.com>
2558 * python/py-symtab.c: Populate symtab_object_methods,
2560 (stpy_is_valid): New function.
2561 (salpy_is_valid): Ditto.
2562 * python/py-symbol.c: Declare symbol_object_methods. Populate.
2563 (sympy_is_valid): New function.
2564 * python/py-objfile.c: Declare objfile_object_methods. Populate.
2565 (objfpy_is_valid): New function.
2566 * python/py-inferior.c: Populate inferior_object_methods.
2567 (infpy_is_valid): New function.
2568 * python/py-infthread.c: Populate thread_object_methods.
2569 (thpy_is_valid): New function.
2570 * python/py-block.c: Declare block_object_methods. Populate. Declare
2571 block_iterator_object_methods. Populate.
2572 (blpy_is_valid): New function.
2573 (blpy_iter_is_valid): Ditto.
2575 2011-03-16 Keith Seitz <keiths@redhat.com>
2577 * linespec.c (find_methods): Canonicalize NAME before looking
2579 (name_end): New function.
2580 (keep_name_info): New function.
2581 (decode_line_1): Use keep_name_info.
2582 (decode_compound): Likewise.
2583 * cli/cli-utils.h (remove_trailing_whitespace): New function.
2584 * cli/cli-utils.c (remove_trailing_whitespace): Likewise.
2587 * linespec.c (locate_first_half): Keep overload information, too.
2588 (decode_compound): Use a string to represent break characters
2590 If P points to a break character, do not increment it.
2591 For C++ and Java, keep overload information and relevant keywords.
2592 If we cannot find a symbol, search the minimal symbols.
2595 * linespec.c (decode_compound): Rename SAVED_ARG to
2597 Make a copy of THE_REAL_SAVED_ARG in SAVED_ARG and strip
2599 Pass a valid block to lookup_symbol.
2600 (lookup_prefix_sym): Likewise.
2601 (find_method): Construct search name based on SYM_CLASS instead
2603 * psymtab.c (lookup_partial_symbol): Add language parameter.
2604 (lookup_symbol_aux_psymtabs): Likewise.
2605 Don't assume that the psymtab we found was the right one. Search
2606 for the desired symbol in the symtab to be certain.
2607 (psymtab_search_name): New function.
2608 (lookup_partial_symbol): Use psymtab_search_name.
2609 Add language parameter.
2610 (read_symtabs_for_function): Add language parameter and pass to
2611 lookup_partial_symbol.
2612 (find_symbol_file_from_partial): Likewise.
2614 2011-03-16 Paul Pluzhnikov <ppluzhnikov@google.com>
2617 * dwarf2read.c (noop_record_line): New function.
2618 (dwarf_decode_lines): Ignore line tables for GCd functions.
2620 2011-03-16 Pierre Muller <muller@ics.u-strasbg.fr>
2622 Fix ARI warnings about new lines at the end of messages, which
2623 are unneeded as there is a new line added at the end of the message
2625 * darwin-nat.c (darwin_stop_inferior): Ditto.
2626 * dec-thread.c (dec_thread_get_ada_task_ptid): Ditto.
2627 * dfp.c (decimal_to_number): Ditto.
2628 * exec.c (print_section_info): Ditto.
2629 * i386-darwin-nat.c (darwin_set_sstep): Ditto.
2630 * osdata.c (get_osdata): Ditto.
2631 * record.c (bfdcore_write): Ditto.
2632 * remote-mips.c (mips_readchar): Ditto.
2633 * remote.c (read_ptid): Ditto.
2634 * ser-mingw.c (ser_windows_raw): Ditto.
2635 * tracepoint.c (add_local_symbols): Ditto.
2636 * windows-nat.c (fake_create_process): Ditto.
2638 2011-03-16 Tom Tromey <tromey@redhat.com>
2640 * tracepoint.c (stop_tracing): Don't declare.
2641 * event-top.c (after_char_processing_hook): Add `(void)'.
2643 2011-03-16 Phil Muldoon <pmuldoon@redhat.com>
2645 * NEWS: Add Parameter sub-classing description.
2647 2011-03-16 Kai Tietz <ktietz@redhat.com>
2649 * MAINTAINERS: Update my e-mail address.
2651 2011-03-15 Andreas Tobler <andreast@fgznet.ch>
2653 * MAINTAINERS: Add myself for write after approval privileges.
2655 2011-03-15 Michael Snyder <msnyder@vmware.com>
2657 * frame.c (find_frame_sal): Assert sym is not null.
2659 * dbxread.c (process_one_symbol): Assert 'name' is not null.
2661 * objc-lang.c (selectors_info): Check strchr for null result.
2663 * stabsread.c (define_symbol): Guard against bad stabstring input.
2665 2011-03-15 Pierre Muller <muller@ics.u-strasbg.fr>
2667 Remove trailing spaces and tabulations from pascal language
2672 p-valprint.c: Ditto.
2674 2011-03-15 Jan Kratochvil <jan.kratochvil@redhat.com>
2676 * dwarf2read.c (dwarf2_get_pc_bounds): Require HIGH strictly higher
2677 than LOW. Comment it.
2678 (read_partial_die): Call complaint for inappropriate zero LOWPC or
2679 HIGHPC not strictly higher than LOWPC.
2681 2011-03-15 Pierre Muller <muller@ics.u-strasbg.fr>
2683 Fix formatting of function declarations returning a pointer in
2685 * varobj.c (varobj_add_child): Ditto.
2686 * hppa-tdep.h (hppa_init_objfile_priv_data): Ditto.
2687 * inferior.h (get_displaced_step_closure_by_addr): Ditto.
2689 2011-03-15 Ulrich Weigand <uweigand@de.ibm.com>
2691 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): Add support
2692 for the "generic" vector ABI used with GCC 4.3 and later.
2693 (ppc64_sysv_abi_return_value): Likewise.
2695 2011-03-15 Ulrich Weigand <uweigand@de.ibm.com>
2697 * infcall.c (call_function_by_hand): Function return value is
2698 always a non_lval, even when using struct_return.
2700 2011-03-15 Pedro Alves <pedro@codesourcery.com>
2702 * printcmd.c (ALL_DISPLAYS_SAFE): New.
2703 (map_display_numbers): New.
2704 (do_delete_display): New.
2705 (undisplay_command): Use map_display_numbers.
2706 (do_enable_disable_display): New.
2707 (enable_disable_display_command): New function.
2708 (enable_display): Delete.
2709 (enable_display_command): New.
2710 (disable_display_command): Reimplement.
2711 (_initialize_printcmd): Adjust "enable display" command to use
2712 `enable_display_command' as callback.
2714 2011-03-14 Phil Muldoon <pmuldoon@redhat.com>
2716 * NEWS: Add Python breakpoint 'stop' operation.
2718 2011-03-14 Phil Muldoon <pmuldoon@redhat.com>
2720 * NEWS: Delete duplicate entry. Fix typo.
2722 2011-03-14 Pierre Muller <muller@ics.u-strasbg.fr>
2724 Fix ARI warning about function names in first column.
2725 Put prototype declaration on same line as return type.
2726 * objc-exp.y: Ditto.
2728 * python/py-stopevent.h: Ditto.
2729 For long function names, split parameters to
2730 allow function name on same line as return type.
2731 * solib-pa64.c: Ditto.
2734 For long function declaration, use single line.
2735 * hppa-tdep.h: Ditto.
2736 * inferior.h: Ditto.
2738 2011-03-14 Phil Muldoon <pmuldoon@redhat.com>
2740 * python/python.h: Declare gdbpy_should_stop and
2741 gdbpy_breakpoint_has_py_cond.
2742 * python/python.c: Add python.h to includes. Remove python.h from
2743 HAVE_PYTHON definition
2744 (gdbpy_should_stop): New dummy function.
2745 (gdbpy_breakpoint_has_py_cond): New dummy function.
2746 * python/py-breakpoint.c (bppy_init): Rewrite to allow
2747 sub-classing capabilities.
2748 (gdbpy_should_stop): New function.
2749 (gdbpy_breakpoint_has_py_cond): New function.
2750 (local_setattro): New function.
2751 * breakpoint.c (condition_command): Add check for Python 'stop'
2753 (bpstat_check_breakpoint_conditions): Execute Python 'stop'
2754 operation function as part of stop/continue tests.
2756 2011-03-14 Tom Tromey <tromey@redhat.com>
2759 * dwarf2loc.c (dwarf_expr_dwarf_call): Remove 'return'.
2760 (needs_frame_dwarf_call): Likewise.
2762 2011-03-14 Pierre Muller <muller@ics.u-strasbg.fr>
2764 Fix ARI warning about functions without parameters that do not
2766 * breakpoint.c (all_tracepoints): Replace () by (void).
2767 * f-exp.y (match_string_literal): Ditto.
2769 * m2-exp.y (yylex): Ditto.
2770 * mep-tdep.c (current_me_module): Ditto.
2771 (current_options): Ditto.
2772 (current_cop_data_bus_width): Ditto.
2773 (current_cr_names): Ditto.
2774 (current_cr_is_float): Ditto.
2775 (current_ccr_names): Ditto.
2776 * objc-exp.y (yylex): Ditto.
2777 * p-exp.y (yylex): Ditto.
2778 * remote.c (send_interrupt_sequence): Ditto.
2779 * tracepoint.c (current_trace_status): Ditto.
2780 * python/py-evts.c (gdbpy_initialize_py_events): Ditto.
2781 * python/py-prettyprint.c (push_dummy_python_frame): Ditto.
2783 2011-03-11 Michael Snyder <msnyder@vmware.com>
2785 * cli/cli-decode.h (CMD_LIST_AMBIGUOUS): Define.
2786 * cli/cli-decode.c (lookup_cmd_1): Use CMD_LIST_AMBIGUOUS.
2787 (lookup_cmd): Test for CMD_LIST_AMBIGUOUS.
2788 * completer.c (complete_line_internal): Use CMD_LIST_AMBIGUOUS.
2789 * top.c (set_verbose): Use CMD_LIST_AMBIGUOUS.
2791 * event-loop-c (delete_async_signal_handler): Assert prev_ptr.
2792 (delete_async_event_handler): Ditto.
2794 * python/py-breakpoint.c (bppy_set_condition): Stop memory leak.
2796 * python/py-breakpoint.c (bppy_get_commands): Fix memory leak.
2798 * top.c (set_verbose): Assert showcmd was found.
2800 2011-03-11 Maxim Grigoriev <maxim2405@gmail.com>
2802 * xtensa-tdep.c (warning_once): Correct style issues.
2804 2011-03-11 Yao Qi <yao@codesourcery.com>
2806 * arm-tdep.c (copy_ldr_str_ldrb_strb): Remove redundant statements.
2808 2011-03-11 Andreas Schwab <schwab@redhat.com>
2810 * common/aclocal.m4: Remove.
2812 2011-03-10 Maxim Grigoriev <maxim2405@gmail.com>
2814 * xtensa-tdep.c (windowing_enabled): Remove inline attribute.
2815 (xtensa_write_register, xtensa_read_register): Likewise.
2816 (xtensa_hextochar): Removed.
2817 (xtensa_init_reggroups): Replace xtensa_hextochar () by explicit code.
2819 2011-03-10 Maxim Grigoriev <maxim2405@gmail.com>
2821 * xtensa-tdep.c (xtensa_c0reg_t): Update comments.
2822 (xtensa_call0_frame_cache_t): Update comments. New fields added.
2823 (xtensa_alloc_frame_cache): Add initialization for new fields.
2824 (xtensa_frame_cache): Change the way how call0_frame_cache () is called.
2825 (warning_once): New function.
2826 (xtensa_insn_kind): New item c0opc_and.
2827 (call0_classify_opcode): Add the case for AND instruction.
2828 (call0_track_op): Change arguments. New local variable litbase.
2829 Add the case to handle c0opc_and. Update algorithms for c0opc_mov,
2830 c0opc_l32r, c0opc_s32i to take into account dynamic stack adjustments
2832 Add cases for c0opc_l32e, c0opc_s32e, c0opc_rfwo, c0opc_rfwu.
2833 (call0_analyze_prologue): Update the comments. Change arguments.
2834 Add the variety of updates to handle extended prologues, which now can
2835 conduct dynamic stack adjustments.
2836 (call0_frame_cache): Likewise.
2837 (xtensa_skip_prologue): Update call0_analyze_prologue () function call.
2838 (xtensa_gdbarch_init): Initialize xtensa_session_once_reported.
2840 2011-03-10 Michael Snyder <msnyder@vmware.com>
2842 * tracepoint.c (cmd_qtv): Discard unused value 'packet'.
2843 (cmd_qtframe): Ditto.
2844 (cmd_qtbuffer): Ditto.
2845 (cmd_bigqtbuffer): Ditto.
2847 2011-03-10 Tom Tromey <tromey@redhat.com>
2849 * tracepoint.c (trace_actions_command): Update.
2850 * thread.c (thread_apply_command): Update.
2851 * reverse.c (delete_bookmark_command): Update.
2852 (bookmarks_info): Update.
2853 * printcmd.c (undisplay_command): Update.
2854 * memattr.c (mem_enable_command): Update.
2855 (mem_disable_command): Update.
2856 (mem_delete_command): Update.
2857 * inferior.c (detach_inferior_command): Update.
2858 (kill_inferior_command): Update.
2859 (remove_inferior_command): Update.
2860 * cli/cli-utils.h (struct get_number_or_range_state): New.
2861 (init_number_or_range): Declare.
2862 (get_number_or_range): Update.
2863 * cli/cli-utils.c (init_number_or_range): New function.
2864 (get_number_or_range): Change 'pp' parameter to 'state'. Remove
2866 (number_is_in_list): Update.
2867 * breakpoint.h (get_tracepoint_by_number): Update.
2868 * breakpoint.c (map_breakpoint_numbers): Update for change to
2869 get_number_or_range.
2870 (find_location_by_number): Use get_number, not
2871 get_number_or_range.
2872 (trace_pass_set_count): New function.
2873 (trace_pass_command): Update for change to get_number_or_range.
2875 (get_tracepoint_by_number): Remove 'multi_p' parameter; add
2878 2011-03-10 Phil Muldoon <pmuldoon@redhat.com>
2880 * python/py-param.c (add_setshow_generic): Add set/show callback
2881 parameters. Register Python object context.
2882 (get_show_value): New function.
2883 (get_set_value): New function.
2884 (call_doc_function): New function.
2885 (get_doc_string): Move behind get_show_value/get_set_value.
2887 2011-03-10 Andreas Tobler <andreast-list@fgznet.ch>
2889 * fbsd-nat.c (fbsd_make_corefile_notes): Constify local `fname'.
2891 2011-03-09 Maxim Grigoriev <maxim2405@gmail.com>
2893 * xtensa-tdep.c (xtensa_read_register): Add comment.
2894 (xtensa_write_register): Likewise.
2895 (xtensa_hextochar): Add comment and update to match coding conventions.
2896 (xtensa_frame_cache, xtensa_return_value): Follow coding conventions.
2897 (execute_l32e, execute_s32e, execute_code): Update comments.
2898 (xtensa_exception_handler_t): Update to match coding conventions.
2899 (xtensa_insn_kind): Likewise.
2901 2011-03-09 Michael Snyder <msnyder@vmware.com>
2903 * mi-cmd-disas.c (mi_cmd_disassemble): Fix memory leak.
2905 2011-03-09 Pedro Alves <pedro@codesourcery.com>
2907 * nto-tdep.c (nto_find_and_open_solib): Constify local `base'.
2909 2011-03-09 Tom Tromey <tromey@redhat.com>
2911 * thread.c (restore_selected_frame): Handle frame_level == -1.
2912 (make_cleanup_restore_current_thread): Use
2913 get_selected_frame_if_set.
2914 * frame.h (get_selected_frame_if_set): Declare.
2915 * frame.c (get_selected_frame_if_set): New function.
2917 2011-03-09 Pedro Alves <pedro@codesourcery.com>
2919 * cli/cli-cmds.c (shell_escape): Use lbasename.
2920 * coffread.c (coff_start_symtab): Constify parameter.
2921 (complete_symtab): Constify `name' parameter.
2922 (coff_symtab_read): Constify `filestring' local.
2923 (coff_getfilename): Constify return and `result' local.
2925 * fbsd-nat.c (fbsd_make_corefile_notes): Use lbasename.
2926 * linux-fork.c (info_checkpoints_command): Use lbasename.
2927 * linux-nat.c (linux_nat_make_corefile_notes): Use lbasename.
2928 * minsyms.c (lookup_minimal_symbol): Use lbasename.
2929 * nto-tdep.c (nto_find_and_open_solib): Use lbasename.
2930 * procfs.c (procfs_make_note_section): Use lbasename.
2931 * tui/tui-io.c (printable_part): Constity return and parameter.
2933 (print_filename): Constify parameters, and local `s'.
2934 (tui_rl_display_match_list): Constify local `temp'.
2936 2011-03-09 Jan Kratochvil <jan.kratochvil@redhat.com>
2939 2011-03-08 Jan Kratochvil <jan.kratochvil@redhat.com>
2940 Fix DWARF-3+ DW_AT_accessibility default assumption.
2941 * dwarf2read.c (dwarf2_add_field): Fix new_field->accessibility for
2942 cu->header.version >= 3.
2944 2011-03-09 Yao Qi <yao@codesourcery.com>
2946 * common/Makefile.in: Remove.
2947 * common/configure: Remove.
2948 * common/configure.ac: Remove.
2950 2011-03-09 Yao Qi <yao@codesourcery.com>
2953 2011-02-11 Yao Qi <yao@codesourcery.com>
2955 * common/Makefile.in: Add copyright header.
2957 2011-02-11 Yao Qi <yao@codesourcery.com>
2959 * Makefile.in: Remove signals.o from COMMON_OBS. Link
2961 * configure.ac: Add common to sub dir.
2962 * configure: Regenerate.
2964 2011-03-08 Maxim Grigoriev <maxim2405@gmail.com>
2966 * xtensa-tdep.c (call0_ret): New function.
2967 (xtensa_skip_prologue): Speed up analysis.
2969 2011-03-08 Maxim Grigoriev <maxim2405@gmail.com>
2971 * xtensa-tdep.c (xtensa_register_reggroup_p): Count in all registers
2972 while executing MI command -data-list-changed-registers.
2974 2011-03-08 Maxim Grigoriev <maxim2405@gmail.com>
2976 * xtensa-tdep.c (xtensa_read_register): New function.
2977 (xtensa_write_register): New function.
2978 (xtensa_find_register_by_name): New function.
2979 (xtensa_windowed_frame_cache): Update comments in type description.
2980 (xtensa_frame_cache): Likewise.
2981 (xtensa_window_interrupt_insn): New function.
2982 (xtensa_frame_cache): Add analysis for Xtensa Window Exception frames.
2983 (xtensa_insn_kind): Add new instructions.
2984 (rwx_special_register): New function.
2985 (call0_classify_opcode): Add new instructions to the analysis.
2986 (a0_saved, a7_saved, a11_saved): New variables.
2987 (a0_was_saved, a7_was_saved, a11_was_saved): New variables.
2988 (execute_l32e): New function.
2989 (execute_s32e): New function.
2990 (xtensa_exception_handler_t): New type.
2991 (execute_code): New function.
2992 (xtensa_window_interrupt_frame_cache): New function to conduct frame
2993 analysis for Xtensa Window Exception handlers.
2995 2011-03-08 Maxim Grigoriev <maxim2405@gmail.com>
2997 * xtensa-tdep.c (TX_PS): New.
2998 (windowing_enabled): Update to count for Call0 ABI.
2999 (xtensa_hextochar): New.
3000 (xtensa_init_reggroups): Make algorithm generic.
3001 (xtensa_frame_cache): Use TX_PS on Tiny Xtensa.
3003 2011-03-08 Maxim Grigoriev <maxim2405@gmail.com>
3005 * xtensa-tdep.h (XTENSA_MAX_COPROCESSOR): Update.
3007 2011-03-08 Michael Snyder <msnyder@vmware.com>
3009 * i386-tdep.c (i386_follow_jump): Check return value of
3011 (i386_analyze_struct_return): Ditto.
3012 (i386_skip_probe): Ditto.
3013 (i386_match_insn): Ditto.
3014 (i386_skip_noop): Ditto.
3015 (i386_analyze_frame_setup): Ditto.
3016 (i386_analyze_register_saves): Ditto.
3017 (i386_skip_prologue): Ditto.
3018 (i386_skip_main_prologue): Ditto.
3020 * target.c (read_whatever_is_readable): Fix memory leak.
3022 * i386-tdep.c (i386_process_record): Document fall through.
3024 2011-03-08 Jan Kratochvil <jan.kratochvil@redhat.com>
3026 Fix DWARF-3+ DW_AT_accessibility default assumption.
3027 * dwarf2read.c (dwarf2_add_field): Fix new_field->accessibility for
3028 cu->header.version >= 3.
3030 2011-03-08 Pedro Alves <pedro@codesourcery.com>
3032 * remote.c (remote_check_symbols): Skip if the target has no
3035 2011-03-08 Joel Brobecker <brobecker@adacore.com>
3037 * target.c (read_whatever_is_readable): Reformat comment,
3038 with a minor typo fix. Minor reformatting of the code.
3040 2011-03-08 Yao Qi <yao@codesourcery.com>
3042 * arm-tdep.c: Remove prototype declaration displaced_in_arm_mode.
3043 (displaced_read_reg): Add `dsc' parameter, remove `from' parameter.
3044 Use cached result instead of calling displaced_in_arm_mode again.
3045 (branch_write_pc, alu_write_pc, load_write_pc): Add `dsc' parameter.
3046 (displaced_write_reg, copy_preload, copy_preload_reg): Callers update.
3047 (cleanup_copro_load_store, copy_copro_load_store): Likewise.
3048 (cleanup_branch, copy_bx_blx_reg, copy_alu_imm): Likewise.
3049 (cleanup_alu_reg, copy_alu_reg, cleanup_alu_shifted_reg): Likewise.
3050 (copy_alu_shifted_reg, cleanup_load, cleanup_store): Likewise.
3051 (copy_extra_ld_st, copy_ldr_str_ldrb_strb): Likewise.
3052 (cleanup_block_load_all, cleanup_block_store_pc): Likewise.
3053 (cleanup_block_load_pc, copy_block_xfer): Likewise.
3054 * arm-linux-tdep.c (arm_linux_copy_svc): Callers update.
3055 (arm_catch_kernel_helper_return): Likewise.
3056 * gdb/arm-tdep.h : Update function declarations.
3058 2011-03-07 Michael Snyder <msnyder@vmware.com>
3060 * dwarf2loc.c (indirect_pieced_value): Assert 'piece' not null.
3062 * ser-unix.c (hardwire_get_tty_state): Stop memory leak.
3064 * mi/mi-cmd-env.c (_initialize_mi_cmd_env): Free environment.
3066 * elfread.c (elf_symtab_read): Stop memory leak.
3068 * main.c (captured_main): Fix memory leak.
3070 2011-03-07 Andreas Schwab <schwab@linux-m68k.org>
3072 * ada-lang.c (compare_names): Call is_name_suffix with string1
3075 2011-03-07 Tom Tromey <tromey@redhat.com>
3077 * xcoffread.c (xcoff_sym_fns): Update.
3078 * symfile.h (struct sym_fns) <sym_read_psymbols>: New field.
3079 (enum symfile_add_flags) <SYMFILE_NO_READ>: New constant.
3080 * symfile.c (syms_from_objfile): Handle SYMFILE_NO_READ.
3081 (symbol_file_add_with_addrs_or_offsets): Likewise.
3082 (reread_symbols): Handle OBJF_PSYMTABS_READ.
3083 * somread.c (som_sym_fns): Update.
3084 * psymtab.h (require_partial_symbols): Declare.
3085 * psymtab.c (require_partial_symbols): New function.
3086 (ALL_OBJFILE_PSYMTABS_REQUIRED): New macro.
3087 (ALL_OBJFILE_PSYMTABS): Undef.
3088 (ALL_PSYMTABS): Move from psympriv.h.
3089 (lookup_partial_symtab, find_pc_sect_psymtab)
3090 (lookup_symbol_aux_psymtabs, relocate_psymtabs)
3091 (find_last_source_symtab_from_partial)
3092 (forget_cached_source_info_partial)
3093 (print_psymtab_stats_for_objfile, read_symtabs_for_function)
3094 (expand_partial_symbol_tables, read_psymtabs_with_filename)
3095 (map_symbol_names_psymtab, map_symbol_filenames_psymtab)
3096 (find_symbol_file_from_partial, map_matching_symbols_psymtab)
3097 (expand_symtabs_matching_via_partial, maintenance_info_psymtabs):
3098 Use ALL_OBJFILE_PSYMTABS_REQUIRED.
3099 * psympriv.h (ALL_PSYMTABS): Move to psymtab.c.
3100 * objfiles.h (OBJF_PSYMTABS_READ): New macro.
3101 * objfiles.c (objfile_has_partial_symbols): Handle lazily-read
3103 * mipsread.c (ecoff_sym_fns): Update.
3104 * machoread.c (macho_sym_fns): Update.
3105 * elfread.c (elf_symfile_read): Set up for lazy psymtab reading.
3106 (read_psyms): New function.
3107 (elf_sym_fns, elf_sym_fns_gdb_index): Update.
3108 (elf_sym_fns_lazy_psyms): New global.
3109 * dwarf2read.c (dwarf2_initialize_objfile): Don't call
3110 dwarf2_build_psymtabs.
3111 * dbxread.c (aout_sym_fns): Update.
3112 * coffread.c (coff_sym_fns): Update.
3114 2011-03-07 Tom Tromey <tromey@redhat.com>
3116 * infrun.c (print_exited_reason): Include inferior id and pid in
3119 2011-03-07 Tom Tromey <tromey@redhat.com>
3121 * target.h (struct target_ops) <to_has_execution>: Add ptid_t
3123 (target_has_execution_1): Update.
3124 (target_has_execution_current): Declare.
3125 (target_has_execution): Call target_has_execution_current.
3126 (default_child_has_execution): Update.
3127 * target.c (default_child_has_execution): Add 'the_ptid'
3129 (target_has_execution_1): Likewise.
3130 (target_has_execution_current): New function.
3131 (add_target): Update.
3132 (init_dummy_target): Update.
3133 * remote-m32r-sdi.c (m32r_has_execution): New function.
3134 (init_m32r_ops): Use it.
3135 * record.c (record_core_has_execution): Now static. Add
3136 'the_ptid' parameter.
3137 * inferior.c (have_live_inferiors): Don't save current thread.
3138 Use target_has_execution_1.
3140 2011-03-07 Yao Qi <yao@codesourcery.com>
3142 * Makefile.in (aclocal_m4_deps): Remove gnulib/m4/memcmp.m4.
3144 2011-03-07 Joel Brobecker <brobecker@adacore.com>
3146 * elfread.c (elf_symtab_read): Minor reformatting.
3148 2011-03-07 Joel Brobecker <brobecker@adacore.com>
3150 * objc-lang.c (selectors_info): Minor reformatting.
3152 2011-03-07 Joel Brobecker <brobecker@adacore.com>
3154 * ada-lang.c (compare_names): Add FALLTHROUGH comment.
3156 2011-03-07 Joel Brobecker <brobecker@adacore.com>
3157 Michael Snyder <msnyder@vmware.com>
3159 * ada-valprint.c (ada_val_print_array): Move the declaration of
3160 "byte_order" and "elttype" inside the block where these variables
3161 are actually used. Remove some special handling for the case
3162 where "elttype" and "eltlen" are null. Replace by a comment
3163 and a couple of assertion checks.
3165 2011-03-05 Michael Snyder <msnyder@vmware.com>
3167 * source.c (add_path): Replace semicolon at end of block.
3168 * dwarf2expr.c (execute_stack_op): Ditto.
3170 2011-03-05 Mike Frysinger <vapier@gentoo.org>
3172 * bfin-tdep.c: Include sim-regno.h and gdb/sim-bfin.h.
3173 * configure.tgt (bfin-*-*linux*): Define gdb_sim.
3174 (bfin-*-*): Likewise.
3176 2011-03-05 Michael Snyder <msnyder@vmware.com>
3178 * dwarf2expr.c (execute_stack_op): Delete superfluous semicolon.
3179 * mdebugread.c (parse_symbol): Ditto.
3180 * parse.c (parse_exp_in_context): Ditto.
3181 * source.c (add_path): Ditto.
3182 * utils.c (gnu_debuglink_crc32): Ditto.
3183 * varobj.c (variable_language): Ditto.
3185 * linux-tdep.c (linux_get_siginfo_type): Stop memory leak.
3187 2011-03-04 Michael Snyder <msnyder@vmware.com>
3189 * linux-fork.c (inferior_call_waitptid): Fix copy/paste error.
3191 * symfile.c (simple_overlay_update): Check for null return value
3192 from lookup_minimal_symbol.
3194 * xml-syscall.c (syscall_start_syscall): Assert name is non null.
3196 2011-03-04 Thiago Jung Bauermann <bauerman@br.ibm.com>
3198 * eval.c (parse_and_eval_address_1): Remove function.
3199 * linespec.c (decode_indirect): Call parse_to_comma_and_eval
3200 instead of parse_and_eval_address_1.
3201 * value.h (parse_and_eval_address_1): Remove prototype.
3203 2011-03-04 Michael Snyder <msnyder@vmware.com>
3205 * remote.c (putpkt_binary): Document that case stmt falls through.
3207 2011-03-04 Thiago Jung Bauermann <bauerman@br.ibm.com>
3209 * breakpointc (print_it_typical): Move NULL check from here...
3210 (print_bp_stop_message): ... to here.
3212 2011-03-04 Michael Snyder <msnyder@msnyder-server.eng.vmware.com>
3214 * breakpoint.c (enable_command): Use break instead of continue,
3215 and fill in a missing break.
3216 (disable_command): Ditto.
3218 2011-03-04 Ulrich Weigand <ulrich.weigand@linaro.org>
3220 * inflow.c (terminal_init_inferior_with_pgrp): Copy ttystate.
3221 (terminal_save_ours): Remove misleading comment.
3222 (inflow_inferior_data_cleanup): Free ttystate.
3223 (inflow_inferior_exit): Likewise.
3224 (copy_terminal_info): Copy ttystate.
3226 * serial.c (serial_copy_tty_state): New function.
3227 * serial.h (serial_copy_tty_state): Add prototype.
3228 (struct serial_ops): Add copy_tty_state callback.
3229 * ser-base.c (ser_base_copy_tty_state): New function.
3230 * ser-base.h (ser_base_copy_tty_state): Add prototype.
3231 * ser-go32.c (dos_copy_tty_state): New function.
3232 (dos_ops): Install copy_tty_state callback.
3233 * ser-mingw.c (_initialize_ser_windows): Likewise.
3234 * ser-pipe.c (_initialize_ser_pipe): Likewise.
3235 * ser-unix.c (hardwire_copy_tty_state): New function.
3236 (_initialize_ser_hardwire): Install it.
3238 2011-03-04 Michael Snyder <msnyder@vmware.com>
3240 * breakpoint.c (create_breakpoint): Add missing break statement.
3242 Reverting this patch:
3243 * infcall.c (call_function_by_hand): Add break statements for lint.
3245 Reverting this patch:
3246 * cli/cli-script.c (script_from_file): Add break for lint.
3248 2011-03-04 Michael Snyder <msnyder@vmware.com>
3250 * solib.c (reload_shared_libraries_1): Close memory leak.
3252 2011-03-03 Tom Tromey <tromey@redhat.com>
3255 * dwarf2read.c (process_psymtab_comp_unit): Handle case where
3258 2011-03-03 Michael Snyder <msnyder@vmware.com>
3260 * remote-fileio.c (remote_fileio_func_fstat): Initialize all
3261 fields of struct 'st' to zero.
3263 * tui/tui-winsource.c (tui_update_source_window_as_is): Initialize
3264 sal.pspace before calling set_current_source_symtab_and_line.
3266 2011-03-03 Yao Qi <yao@codesourcery.com>
3268 * Makefile.in (configure-common): Remove. Let Makefile
3269 in dir common to rebuild itself.
3270 (common/Makefile): Likewise.
3272 2011-03-03 Joel Brobecker <brobecker@adacore.com>
3274 * utils.c (parse_escape): Add i18n markup in error message.
3276 2011-03-03 Yao Qi <yao@codesourcery.com>
3278 * gdb/arm-tdep.c (shifted_reg_val): Replace magic number 15 with
3280 (thumb_get_next_pc_raw, arm_get_next_pc_raw): Likewise.
3281 (displaced_write_reg, displaced_read_reg): Likewise.
3282 (copy_ldr_str_ldrb_strb, cleanup_block_load_all): Likewise.
3283 (cleanup_block_load_pc, copy_block_xfer): Likewise.
3284 (cleanup_branch): Replace magic number 14 and 15 with
3285 ARM_LR_REGNUM and ARM_PC_REGNUM respectively.
3287 2011-03-02 Michael Snyder <msnyder@vmware.com>
3289 * maint.c (maintenance_do_deprecate): No need to check for NULL.
3291 * cli/cli-script.c (script_from_file): Add break for lint.
3293 * mdebugread.c (parse_partial_symbols): Fix indent.
3295 * target-descriptions.c (tdesc_gdb_type): No need to call
3296 xstrdup, callee saves a copy.
3298 * printcmd.c (print_scalar_formatted): Use strncpy for safety.
3300 * infcall.c (call_function_by_hand): Add break statements for lint.
3302 * utils.c (parse_escape): Escape the escape char.
3304 * python/py-inferior.c (build_inferior_list): Error out if
3305 PyList_Append fails.
3306 (gdbpy_inferiors): Error out if build_inferior_list fails.
3308 * linux-nat.c (linux_nat_xfer_partial): Preserve errno around
3311 * record.c (record_restore): Move printf to before error return.
3313 2011-03-02 Yao Qi <yao@codesourcery.com>
3315 * arm-tdep.h (struct displaced_step_closure): Add two new fields
3316 is_thumb and insn_size.
3317 * arm-tdep.c (displaced_read_reg): Adjust correct pipeline offset
3318 on both ARM and Thumb mode.
3319 (arm_process_displaced_insn): Set is_thumb and insn_size.
3320 (arm_displaced_init_closure): Handle both 16-bit and 32-bit.
3321 (arm_displaced_step_fixup): Likewise.
3323 2011-03-01 Michael Snyder <msnyder@vmware.com>
3325 * cli/cli-dump.c (dump_bfd_file): Check error return and warn.
3327 * jv-lang.c (evaluate_subexp_java): Conditional can't be true.
3329 * dwarf2read.c (dwarf2_compute_name): NAME cannot be null here.
3331 * cli/cli-dump.c (restore_binary_file): Validate ftell return value.
3333 * ada-lang.c (ada_make_symbol_completion_list): Replace malloc
3336 * ada-lang.c (aggregate_assign_others): Rename inner scope variable
3337 which shadows function parameter.
3339 * tracepoint.c (create_tsv_from_upload): Superfluous call
3340 to xstrdup. Callee already calls xstrdup.
3342 * linespec.c (decode_line_1): Remove unnecessary null check.
3344 * tracepoint.c (scope_info): Fix mem leak, remove underused
3347 * python/py-prettyprint.c (apply_val_pretty_printer): Remove
3348 superfluous null check.
3350 * std-regs.c (value_of_builtin_frame_pc_reg): Frame can't be null.
3351 (value_of_builtin_frame_fp_reg): Ditto.
3353 * event-top.c (display_gdb_prompt): Remove superfluous null check.
3355 * python/py-prettyprint.c (apply_val_pretty_printer): VAL may
3358 * linespec.c (decode_line_1): Check for null before dereference.
3360 * reverse.c (record_restore): Move null-check to before pointer
3363 * python/py-utils.c (gdbpy_obj_to_string): Delete unused variable.
3365 * objc-lang.c (selectors_info): Add explanitory comment.
3366 (classes_info): Ditto.
3368 2011-03-01 Ulrich Weigand <ulrich.weigand@linaro.org>
3370 * arm-linux-tdep.c (ARM_LDR_PC_SP_4): Add define.
3371 (arm_linux_restart_syscall_init): Handle both on-stack and in-kernel
3372 versions of the trampoline. Handle Thumb vs. ARM addresses.
3373 (arm_kernel_linux_restart_syscall_tramp_frame): New global.
3374 (arm_linux_init_abi): Install it.
3375 * arm-tdep.c (arm_psr_thumb_bit): Make global.
3376 * arm-tdep.c (arm_psr_thumb_bit): Add prototype.
3378 2011-02-28 Michael Snyder <msnyder@vmware.com>
3380 * ui-out.c (ui_out_field_core_addr): Make local char buffer
3381 a little bigger, to avoid possibility of an overflow.
3383 * breakpoint.c (breakpoint_adjustment_warning): Make local char
3384 buffers a little bigger, to avoid possibility of an overflow.
3386 * coffread.c (coff_getfilename): Add check to avoid overflow.
3388 * objc-lang.c (selectors_info): Add a small safety margin to
3390 (classes_info): Error out on too long REGEXP.
3392 * infrun.c (handle_inferior_event): Remove unused function call.
3394 * fork-child.c (fork_inferior): Remove ifdef'd code and
3397 * linux-thread-db.c (attach_thread): Discard unused value.
3399 * linux-nat.c (linux_handle_extended_wait): Delete unused variable.
3401 * remote.c (remote_get_noisy_reply): Discard unused value.
3402 (remote_vcont_resume): Ditto.
3403 (remote_stop_ns): Ditto.
3405 * linespec.c (decode_objc): Delete unused variable.
3407 * tui/tui-regs.c (tui_register_format): Delete unused variable.
3409 * dwarf2read.c (add_partial_symbol): Discard unused values.
3410 (read_base_type): Delete unused variable.
3412 * dbxread.c (read_dbx_symtab): Discard unused value.
3414 * eval.c (evaluate_subexp_standard): Delete unused variable,
3415 and discard unused values.
3417 * infcmd.c (_initialize_infcmd): Discard unused values.
3419 * stabsread.c (rs6000_builtin_type): Missing break statement.
3421 * dbxread.c (process_one_symbol): Discard unused value.
3423 * coffread.c (coff_end_symtab): Delete unused variable.
3425 * dwarf2read.c (dw2_get_file_names): Discard unused value.
3426 (dwarf2_add_typedef): Delete unused variable.
3427 (read_namespace): Ditto.
3428 (dwarf_decode_macros): Ditto.
3430 * m2-lang.c (evaluate_subexp_modula2): Discard unused variable.
3432 * opencl-lang.c (evaluate_subexp_opencl): Discard unused value.
3434 * p-valprint.c (pascal_val_print): Discard unused value.
3436 * utils.c (nquery): Call va_end before return;
3440 * proc-service.c (ps_plog): Call va_end before return.
3442 2011-02-28 Tom Tromey <tromey@redhat.com>
3444 * python/python.c (gdbpy_value_cst): New global.
3445 (_initialize_python): Initialize it.
3446 * python/python-internal.h (gdbpy_value_cst): Declare.
3447 * python/py-value.c (convert_value_from_python): Use
3450 2011-02-28 Michael Snyder <msnyder@vmware.com>
3452 * python/py-cmd.c (cmdpy_init): Fix memory leak.
3454 * breakpoint.c (catch_syscall_completer): Free malloced list.
3456 * jv-lang.c (java_primitive_type_from_name): Add missing break.
3458 * opencl-lang.c (lval_func_check_validity): Rename inner variables.
3459 (lval_func_check_synthetic_pointer): Ditto.
3460 (lval_func_free_closure): Fix use-after-free.
3462 2011-02-28 Tom Tromey <tromey@redhat.com>
3464 * psymtab.c (expand_partial_symbol_tables): Use
3465 ALL_OBJFILE_PSYMTABS.
3467 2011-02-28 Jan Kratochvil <jan.kratochvil@redhat.com>
3469 * objc-lang.c (selectors_info): Error on too long REGEXP.
3471 2011-02-28 Michael Snyder <msnyder@vmware.com>
3473 * python/py-param.c (set_parameter_value): Add missing
3476 * linux-record.c (record_linux_system_call): Add missing
3479 2011-02-28 Ulrich Weigand <uweigand@de.ibm.com>
3481 * breakpoint.c (print_one_breakpoint_location): Remove unused
3482 argument PRINT_ADDRESS_BITS. Update callers.
3483 (print_one_breakpoint): Likewise.
3485 2011-02-28 Ulrich Weigand <uweigand@de.ibm.com>
3487 * breakpoint.c (wrap_indent_at_field): New function.
3488 (print_breakpoint_location): Use it instead of WRAP_INDENT argument.
3489 Allocate ui_stream locally instead of using STB argument.
3490 (print_one_breakpoint_location): Update call.
3491 * ui-out.c (ui_out_query_field): New function.
3492 * ui-out.h (ui_out_query_field): Add prototype.
3494 2011-02-28 Joel Brobecker <brobecker@adacore.com>
3496 From Michael Snyder <msnyder@vmware.com>
3497 * ada-exp.y (write_object_renaming): Add FALLTHROUGH comment.
3499 2011-02-27 Michael Snyder <msnyder@vmware.com>
3501 * objc-lang.c (selectors_info): Prevent string overrun.
3503 * tui/tui-stack.c (tui_get_function_from_frame): Fix off by one
3506 * symtab.c (rbreak_command): Move variable 'file_name' to
3509 * d-valprint.c (dynamic_array_type): Avoid shadowing a function
3510 param with a local variable of the same name.
3512 2011-02-27 Michael Snyder <msnyder@vmware.com>
3514 * value.c (value_from_history_ref): New function.
3515 * value.h (value_from_history_ref): Export.
3516 * cli/cli-utils.c (get_number_trailer): Use value_from_history_ref
3517 to parse value history references.
3518 * cli/cli-utils.h (get_number_trailer): Update comment.
3520 2011-02-27 Michael Snyder <msnyder@vmware.com>
3522 * inferior.c (detach_inferior_command): Use get_number_or_range.
3523 (kill_inferior_command): Ditto.
3524 (remove_inferior_command): Ditto.
3525 (initialize_inferiors): Make command names plural.
3526 Update help strings.
3528 2011-02-27 Michael Snyder <msnyder@vmware.com>
3530 * darwin-nat-info.c: Fix comment typo.
3531 * dwarf2expr.h: Ditto.
3532 * fbsd-nat.c: Ditto.
3533 * fbsd-nat.h: Ditto.
3534 * frame-unwind.h: Ditto.
3536 * hppa-hpux-tdep.c: Ditto.
3537 * i386-linux-nat.c: Ditto.
3538 * linux-nat.c: Ditto.
3539 * nbsd-nat.c: Ditto.
3540 * nbsd-nat.h: Ditto.
3541 * ppc-linux-tdep.c: Ditto.
3544 * tui/tui-winsource.c: Ditto.
3546 2011-02-26 Michael Snyder <msnyder@vmware.com>
3548 * breakpoint.c (reattach_breakpoints): Avoid resource leak (ui_file).
3550 * maint.c (maintenance_do_deprecate): Plug a memory leak.
3552 * dwarf2loc.c (insert_bits): Avoid shadowing a function param
3553 with a local variable of the same name.
3555 * i387-tdep.c (i387_supply_fxsave): Avoid shadowing a function
3556 param with a local variable of the same name.
3557 (i387_supply_xsave): Ditto.
3559 * linux-low.c (linux_nat_xfer_osdata): Rename local variable so
3560 that it does not shadow a function parameter.
3562 * i386-nat.c (i386_length_and_rw_bits): Document that case
3563 statement is meant to fall through.
3565 * expprint.c (dump_subexp_body_standard): Document that case
3566 statement is meant to fall through.
3568 * amd64-linux-tdep.c (amd64_linux_syscall_record): Delete
3569 dead if statement. Condition can't be false.
3571 2011-02-25 Michael Snyder <msnyder@vmware.com>
3573 * arm-tdep.c: Fix typos in comments.
3574 * bsd-uthread.c: Ditto.
3575 * completer.c: Ditto.
3577 * cp-namespace.c: Ditto.
3578 * cp-support.c: Ditto.
3579 * cris-tdep.c: Ditto.
3581 * dwarf2read.c: Ditto.
3583 * gdbtypes.h: Ditto.
3584 * inferior.h: Ditto.
3585 * mdebugread.c: Ditto.
3586 * mips-tdep.c: Ditto.
3587 * ppc-linux-nat.c: Ditto.
3588 * ppc-linux-tdep.c: Ditto.
3589 * printcmd.c: Ditto.
3590 * sol-thread.c: Ditto.
3591 * solib-frv.c: Ditto.
3593 * sparc64-tdep.c: Ditto.
3594 * spu-tdep.c: Ditto.
3595 * stabsread.c: Ditto.
3600 * python/py-block.c: Ditto.
3601 * python/py-symbol.c: Ditto.
3602 * python/py-symtab.c: Ditto.
3603 * python/py-value.c: Ditto.
3604 * tui/tui-win.c: Ditto.
3606 2011-02-25 Michael Snyder <msnyder@vmware.com>
3608 * inferior.c (print_inferior): Accept a string instead of an int
3609 for requested_inferiors, and use get_number_or_range to parse it.
3610 (info_inferiors_command): Pass args string to print_inferior.
3611 (initialize_inferiors): Change help string for info inferiors.
3612 * inferior.h (print_inferior): Export prototype change.
3614 2011-02-25 Tom Tromey <tromey@redhat.com>
3616 * common/ax.def (invalid2): Set to 0x31.
3618 2011-02-25 Jan Kratochvil <jan.kratochvil@redhat.com>
3620 * dwarf2loc.c (disassemble_dwarf_expression) <DW_OP_breg[0-9]+>: Use
3622 (disassemble_dwarf_expression) <DW_OP_bregx>: Drop variable offset,
3624 (disassemble_dwarf_expression) <DW_OP_fbreg>: Use L and plongest.
3626 2011-02-24 Michael Snyder <msnyder@vmware.com>
3628 * Makefile.in (clean): Make clean should remove generated files
3629 observer.h and observer.inc.
3631 2011-02-24 Joel Brobecker <brobecker@adacore.com>
3633 Revert the following patch (not approved yet):
3634 2011-02-21 Hui Zhu <teawater@gmail.com>
3635 * Makefile.in (HFILES_NO_SRCDIR): Add printcmd.h.
3636 * ax-gdb.c (gen_printf_expr_callback): New function.
3637 * ax-gdb.h (gen_printf_expr_callback): Forward declare.
3638 * ax-general.c (ax_memcpy): New function.
3639 (ax_print): Handle "printf".
3641 * ax.h (ax_memcpy): Forward declare.
3642 * common/ax.def (invalid2): Removed.
3643 (printf): New entry.
3644 * printcmd.c (printcmd.h): New include.
3645 (string_printf): New function.
3646 (ui_printf): Removed.
3647 (printf_command): Remove static. Call string_printf.
3648 (eval_command): Call string_printf.
3649 * printcmd.h: New file.
3650 * tracepoint.c (validate_actionline,
3651 encode_actions_1): handle printf_command.
3653 2011-02-23 Tom Tromey <tromey@redhat.com>
3655 * ax-general.c (ax_pick): Add missing newline.
3657 2011-02-23 Michael Snyder <msnyder@vmware.com>
3659 * breakpoint.c (breakpoint_1): Change first argument from an int
3660 to a char pointer, so that the function now accepts a list of
3661 breakpoints rather than just one. Use new function
3662 'number_is_in_list' to implement.
3663 (breakpoints_info): Pass char * instead of int to breakpoint_1.
3664 (watchpoints_info): Ditto.
3665 (tracepoints_info): Ditto.
3666 (maintenance_info_breakpoints): Ditto.
3667 (_initialize_breakpoint): Update help strings to reflect the fact
3668 that these functions can now take more than one argument.
3669 * cli/cli-utils.c (number_is_in_list): New function.
3670 * cli/cli-utils.h (number_is_in_list): Export.
3672 2011-02-23 Michael Snyder <msnyder@vmware.com>
3674 * memattr.c (mem_enable_command): Use get_number_or_range.
3675 (mem_disable_command): Ditto.
3676 (mem_delete_command): Ditto.
3677 (_initialize_mem): Tweak usage message to reflect multiple
3680 2011-02-22 Doug Evans <dje@google.com>
3682 Add gdb.lookup_global_symbol python function.
3684 * python/py-symbol.c (gdbpy_lookup_global_symbol): New function.
3685 * python/python-internal.h (gdbpy_lookup_global_symbol): Declare it.
3686 * python/python.c (GdbMethods): Add entry for lookup_global_symbol.
3688 2011-02-22 Tom Tromey <tromey@redhat.com>
3690 * language.c (language_class_name_from_physname): Rename
3691 'curr_language' argument to 'lang'; use in body.
3693 2011-02-22 Michael Snyder <msnyder@vmware.com>
3695 * cli/cli-utils.c (number_is_in_list): Check for zero return.
3697 2011-02-22 Pedro Alves <pedro@codesourcery.com>
3699 * frame-unwind.h: Fix comment to mention the this frame, not the
3702 2011-02-22 Tom Tromey <tromey@redhat.com>
3704 * symfile.c (auto_solib_limit): Remove.
3705 * symfile.h (auto_solib_limit): Remove.
3707 2011-02-22 Joel Brobecker <brobecker@adacore.com>
3709 * Makefile.in (INSTALLED_LIBS): Delete. Update comment.
3711 2011-02-21 Michael Snyder <msnyder@vmware.com>
3713 * gdbthread.h (print_thread_info): Change prototype.
3714 * thread.c (print_thread_info): Accept char* instead of int for
3715 requested_threads argument. Use new function number_is_in_list
3716 to determine which threads to list.
3717 (info_threads_command): Pass char* to print_thread_info.
3718 * cli/cli-utils.c (number_is_in_list): New function.
3719 * cli/cli-utils.h (number_is_in_list): Export.
3720 * mi/mi-main.c (mi_cmd_thread_info): Pass char* to
3722 (print_one_inferior): Ditto.
3723 (mi_cmd_list_thread_groups): Ditto.
3725 2011-02-21 Jan Kratochvil <jan.kratochvil@redhat.com>
3727 * common/Makefile.in (CFLAGS): New.
3728 (COMPILE): Add $(CFLAGS).
3730 2011-02-21 Tom Tromey <tromey@redhat.com>
3732 * breakpoint.c (catch_syscall_command_1): Fix typo.
3734 2011-02-21 Tom Tromey <tromey@redhat.com>
3736 * reverse.c: Include cli-utils.h.
3737 * printcmd.c: Include cli-utils.h.
3738 (string_printf): Use skip_spaces.
3739 * cli/cli-utils.h: New file.
3740 * cli/cli-utils.c: New file.
3741 * cli/cli-dump.h (skip_spaces): Move to cli-utils.h.
3742 * cli/cli-dump.c (skip_spaces): Move to cli-utils.c.
3743 * breakpoint.h (get_number, get_number_or_range): Move to
3745 * breakpoint.c: Include cli-utils.h.
3746 (get_number_trailer, get_number, get_number_or_range)
3747 (ep_skip_leading_whitespace): Move to cli-utils.c.
3748 (create_breakpoint_sal, find_condition_and_thread)
3749 (decode_static_tracepoint_spec, watch_command_1)
3750 (watch_maybe_just_location, ep_parse_optional_if_clause)
3751 (catch_fork_command_1, catch_exec_command_1)
3752 (catch_syscall_command_1): Use skip_spaces, skip_to_space.
3753 * Makefile.in (SUBDIR_CLI_OBS): Add cli-utils.o.
3754 (SUBDIR_CLI_SRCS): Add cli-utils.c.
3755 (HFILES_NO_SRCDIR): Add cli-utils.h.
3756 (cli-utils.o): New target.
3758 2011-02-18 Pierre Muller <muller@ics.u-strasbg.fr>
3760 * remote.c (remote_close): Reset INFERIOR_PTID to NULL_PTID
3761 before calling discard_all_inferiors.
3763 2011-02-21 Ulrich Weigand <uweigand@de.ibm.com>
3765 * opencl-lang.c (STRUCT_OCL_TYPE): Remove.
3766 (struct builtin_opencl_type): Remove.
3767 (builtin_opencl_type): Change return type to "struct type **".
3768 (lookup_opencl_vector_type): Update caller.
3769 (opencl_language_arch_info): Copy primitive type vector from gdbarch.
3770 (build_opencl_types): Install plain array of "struct type *"
3771 instead of "struct builtin_opencl_type".
3773 2011-02-21 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
3774 Ulrich Weigand <uweigand@de.ibm.com>
3776 * arm-linux-nat.c: Include "observer.h" and "gdbthread.h".
3777 (PTRACE_GETHBPREGS, PTRACE_SETHBPREGS): Define.
3778 (struct arm_linux_hwbp_cap): New type.
3779 (arm_linux_get_hwbp_cap): New function.
3780 (arm_linux_get_hw_breakpoint_count): Likewise.
3781 (arm_linux_get_hw_watchpoint_count): Likewise.
3782 (arm_linux_can_use_hw_breakpoint): Likewise.
3783 (arm_hwbp_type): New type.
3784 (arm_hwbp_control_t): Likewise.
3785 (struct arm_linux_hw_breakpoint): Likewise.
3786 (struct arm_linux_thread_points): Likewise.
3787 (arm_threads): New global variable.
3788 (arm_linux_find_breakpoints_by_tid): New function.
3789 (arm_hwbp_control_initialize): Likewise.
3790 (arm_hwbp_control_is_enabled): Likewise.
3791 (arm_hwbp_control_disable): Likewise.
3792 (arm_linux_hw_breakpoint_initialize): Likewise.
3793 (arm_linux_get_hwbp_type): Likewise.
3794 (arm_linux_hw_watchpoint_initialize): Likewise.
3795 (arm_linux_hw_breakpoint_equal): Likewise.
3796 (arm_linux_insert_hw_breakpoint1): Likewise.
3797 (arm_linux_remove_hw_breakpoint1): Likewise.
3798 (arm_linux_insert_hw_breakpoint): Likewise.
3799 (arm_linux_remove_hw_breakpoint): Likewise.
3800 (arm_linux_region_ok_for_hw_watchpoint): Likewise.
3801 (arm_linux_insert_watchpoint): Likewise.
3802 (arm_linux_remove_watchpoint): Likewise.
3803 (arm_linux_stopped_data_address): Likewise.
3804 (arm_linux_stopped_by_watchpoint): Likewise.
3805 (arm_linux_watchpoint_addr_within_range): Likewise.
3806 (arm_linux_new_thread): Likewise.
3807 (arm_linux_thread_exit): Likewise.
3808 (_initialize_arm_linux_nat): Install hardware breakpoint/watchpoint
3809 related target callbacks. Register arm_linux_new_thread and
3810 arm_linux_thread_exit.
3811 * arm-tdep.h (arm_pc_is_thumb): Add prototype.
3812 * arm-tdep.c (arm_pc_is_thumb): Make global.
3813 (arm_gdbarch_init): Call set_gdbarch_have_nonsteppable_watchpoint.
3815 2011-02-21 Ulrich Weigand <uweigand@de.ibm.com>
3817 * breakpoint.c (update_watchpoint): Do not attempt to recreate
3818 per-frame locations while within a function epilogue.
3820 2011-02-21 Pierre Muller <muller@ics.u-strasbg.fr>
3822 * ser-mingw.c (ser_windows_close): Reformat comment to better conform
3823 to GNU coding standards.
3825 2011-02-21 Pierre Muller <muller@ics.u-strasbg.fr>
3827 Allow use of mingw native on Windows 95 OS.
3828 * ser-mingw.c (CancelIo): New macro for dynamically loaded DLL entry.
3829 (ser_windows_close): Only call CancelIo if function exists.
3830 (_initialize_ser_windows): Use LoadLirary/GetProcAddress
3831 to check for existence of CancelIo function in kernel32 DLL.
3833 2011-02-21 Hui Zhu <teawater@gmail.com>
3835 * Makefile.in (HFILES_NO_SRCDIR): Add printcmd.h.
3836 * ax-gdb.c (gen_printf_expr_callback): New function.
3837 * ax-gdb.h (gen_printf_expr_callback): Forward declare.
3838 * ax-general.c (ax_memcpy): New function.
3839 (ax_print): Handle "printf".
3841 * ax.h (ax_memcpy): Forward declare.
3842 * common/ax.def (invalid2): Removed.
3843 (printf): New entry.
3844 * printcmd.c (printcmd.h): New include.
3845 (string_printf): New function.
3846 (ui_printf): Removed.
3847 (printf_command): Remove static. Call string_printf.
3848 (eval_command): Call string_printf.
3849 * printcmd.h: New file.
3850 * tracepoint.c (validate_actionline,
3851 encode_actions_1): handle printf_command.
3853 2011-02-19 Michael Snyder <msnyder@vmware.com>
3855 * reverse.c (delete_one_bookmark): Argument is now bookmark
3856 id rather than pointer to bookmark struct.
3857 (delete_bookmark_command): Use get_number_or_range.
3858 (goto_bookmark_command): Parse with get_number instead of strtoul.
3859 (bookmark_1): New function. Print info for one bookmark.
3860 (bookmarks_info): Use get_number_or_range and bookmark_1.
3862 2011-02-18 Michael Snyder <msnyder@vmware.com>
3864 * thread.c (info_threads_command): Re-implement using
3865 get_number_or_range.
3866 (thread_apply_command): Ditto.
3868 2011-02-18 Tom Tromey <tromey@redhat.com>
3870 * common/ax.def: New file.
3871 * ax.h (enum agent_op): Use ax.def.
3872 * ax-general.c (aop_map): Use ax.def.
3874 2011-02-18 Tom Tromey <tromey@redhat.com>
3876 * ax-general.c (aop_map): Add pick and rot.
3877 * dwarf2loc.c (compile_dwarf_to_ax) <DW_OP_over>: Reimplement.
3878 <DW_OP_rot>: Implement.
3879 * ax.h (enum agent_op) <aop_pick, aop_rot>: New constants.
3881 * ax-general.c (ax_pick): New function.
3883 2011-02-18 Tom Tromey <tromey@redhat.com>
3885 * Makefile.in (HFILES_NO_SRCDIR): Don't mention ada-operator.inc.
3887 2011-02-18 Jan Kratochvil <jan.kratochvil@redhat.com>
3888 Tom Tromey <tromey@redhat.com>
3890 * cp-support.c (make_symbol_overload_list_namespace): Do not call
3891 make_symbol_overload_list_block with NULL BLOCK.
3892 * valarith.c (unop_user_defined_p): Resolve also TYPE_CODE_TYPEDEF.
3894 2011-02-18 Pedro Alves <pedro@codesourcery.com>
3896 * breakpoint.c (get_number_trailer): No longer accept a NULL PP.
3897 * breakpoint.h (get_number_or_range): Declare.
3898 * printcmd.c (ALL_DISPLAYS): Declare.
3899 (delete_display): Reimplement taking a display pointer.
3900 (undisplay_command): Accept a range of displays to delete, using
3901 get_number_or_range.
3903 2011-02-18 Pierre Muller <muller@ics.u-strasbg.fr>
3905 * c-valprint.c (c_val_print): Add embedded_offset to address
3906 for arrays of unspecified length.
3907 * p-valprint.c (pascal_val_print): Likewise.
3909 2011-02-18 Yao Qi <yao@codesourcery.com>
3911 * gdb/arm-tdep.c (arm_displaced_step_copy_insn): Move code to ...
3912 (arm_process_displaced_insn): .. here. Remove parameter INSN.
3913 (thumb_process_displaced_insn): New.
3914 * gdb/arm-linux-tdep.c (arm_linux_displaced_step_copy_insn): Update
3915 call to arm_process_displaced_insn.
3916 * gdb/arm-tdep.h : Update declaration of arm_process_displaced_insn.
3918 2011-02-17 Tom Tromey <tromey@redhat.com>
3920 * dwarf2loc.h (dwarf2_compile_expr_to_ax): Declare.
3921 * dwarf2loc.c (dwarf2_compile_expr_to_ax): Rename from
3922 compile_dwarf_to_ax. No longer static. Call
3923 dwarf2_compile_cfa_to_ax.
3924 (locexpr_tracepoint_var_ref): Update.
3925 (loclist_tracepoint_var_ref): Update.
3926 * dwarf2-frame.h (dwarf2_compile_cfa_to_ax): Declare.
3927 * dwarf2-frame.c (execute_cfa_program): Remove 'this_frame'
3928 argument; add 'gdbarch' and 'pc'.
3929 (dwarf2_compile_cfa_to_ax): New function.
3930 (dwarf2_frame_cache): Update.
3932 2011-02-17 Joel Brobecker <brobecker@adacore.com>
3934 * ada-lang.c (ada_type_of_array): Fix the size of the array
3935 in the case of an unconstrained packed array.
3937 2011-02-17 Yao Qi <yao@codesourcery.com>
3939 * common/Makefile.in: Add more targets for make.
3941 2011-02-16 Tom Tromey <tromey@redhat.com>
3943 * dwarf2loc.c (unimplemented): Fix typo.
3945 2011-02-16 Tom Tromey <tromey@redhat.com>
3947 * dwarf2loc.c (unimplemented): Handle unnamed opcodes.
3948 (compile_dwarf_to_ax) <default>: Use unimplemented.
3949 <DW_OP_deref>: Update.
3950 (disassemble_dwarf_expression): Update.
3951 * dwarf2read.c (dwarf_stack_op_name): Remove 'def' argument.
3952 (decode_locdesc): Update.
3953 * dwarf2expr.h (dwarf_stack_op_name): Update.
3955 2011-02-16 Tom Tromey <tromey@redhat.com>
3957 * ax.h (struct aop_map) <name>: Now const.
3959 2011-02-16 Tom Tromey <tromey@redhat.com>
3961 * ax-gdb.c.c (gen_expr) <UNOP_MEMVAL>: Handle value kinds other
3964 2011-02-16 Yao Qi <yao@codesourcery.com>
3966 * infrun.c (get_displaced_step_closure_by_addr): New.
3967 * inferior.h: Declare it.
3968 * arm-tdep.c: (arm_pc_is_thumb): Call
3969 get_displaced_step_closure_by_addr. Adjust MEMADDR if it
3972 2011-02-16 Pedro Alves <pedro@codesourcery.com>
3973 Jan Kratochvil <jan.kratochvil@redhat.com>
3976 * tracepoint.c (memrange_sortmerge): Fix list A's end calculation.
3978 2011-02-16 Pedro Alves <pedro@codesourcery.com>
3979 Jan Kratochvil <jan.kratochvil@redhat.com>
3981 * value.c (value_contents_copy_raw): Extend describing comment.
3982 Assert that the destination contents we're overwriting are wholly
3984 (value_contents_copy): Extend describing comment.
3986 2011-02-16 Pedro Alves <pedro@codesourcery.com>
3987 Jan Kratochvil <jan.kratochvil@redhat.com>
3989 * value.c (value_available_contents_eq): Remove redundant local
3990 variables. Fix available contents comparision.
3991 * value.h (value_available_contents_eq): Extend describing
3994 2011-02-16 Yao Qi <yao@codesourcery.com>
3996 * thread.c (info_threads_command): Add missing i18n markup and remove
3999 2011-02-15 Paul Pluzhnikov <ppluzhnikov@google.com>
4001 * breakpoint.c (longjmp_names): New variable.
4002 (struct breakpoint_objfile_data): New type.
4003 (breakpoint_objfile_key): New variable.
4004 (msym_not_found): New variable.
4005 (msym_not_found_p): New predicate.
4006 (get_breakpoint_objfile_data): New function.
4007 (create_overlay_event_breakpoint): Check per-objfile cache for
4009 (create_longjmp_master_breakpoint): Likewise.
4010 (create_std_terminate_master_breakpoint): Likewise.
4011 (create_exception_master_breakpoint): Likewise.
4012 (_initialize_breakpoint): Register per-objfile data key.
4014 2011-02-15 Paul Pluzhnikov <ppluzhnikov@google.com>
4016 * breakpoint.c ((create_overlay_event_breakpoint): Const-propagate
4018 (create_longjmp_master_breakpoint): Loop over longjmp names.
4019 (create_std_terminate_master_breakpoint): Const-propagate parameter
4021 (update_breakpoints_after_exec): Adjust.
4022 (breakpoint_re_set): Adjust.
4024 2011-02-15 Michael Snyder <msnyder@vmware.com>
4026 * thread.c (info_threads_command): Process arg as thread id,
4027 or list of thread ids.
4028 (thread_find_command): New command.
4029 (_initialize_thread): Document argument for info threads.
4030 Document 'thread find' command.
4031 * NEWS: Document new command "thread find".
4033 2011-02-15 Jan Kratochvil <jan.kratochvil@redhat.com>
4035 * Makefile.in (ACLOCAL_AMFLAGS): Add `-I ../config'.
4036 * aclocal.m4: Regenerated with aclocal-1.11.1.
4037 * common/configure: Regenerate with autoconf-2.64.
4039 2011-02-15 Ken Werner <ken.werner@de.ibm.com>
4041 * opencl-lang.c (build_opencl_types): Set the size of the built-in
4042 bool data type to a size of one byte.
4044 2011-02-15 Pedro Alves <pedro@codesourcery.com>
4045 Jan Kratochvil <jan.kratochvil@redhat.com>
4047 * target.c (memory_xfer_live_readonly_partial): Document where to
4048 look for interface description.
4050 2011-02-15 Yao Qi <yao@codesourcery.com>
4053 * arm-tdep.c (copy_ldr_str_ldrb_strb): Replace PC with SP in
4054 order to store PC value on stack instead of text section.
4056 2011-02-15 Thiago Jung Bauermann <bauerman@br.ibm.com>
4058 * rs6000-tdep.c (IS_EFP_PSEUDOREG): Use correct constant for
4059 the EFP register set size.
4060 (efpr_pseudo_register_read): Use regcache_raw_read_part to read
4061 data from the VMX register.
4062 (efpr_pseudo_register_write): Use regcache_raw_write_part to read
4063 and write data from/to the VMX register.
4065 2011-02-14 Michael Snyder <msnyder@vmware.com>
4067 * command.h (enum command_class): New class 'no_set_class', for
4068 "show" commands without a corresponding "set" command.
4069 * value.c (_initialize_values): Use 'no_set_class' for "show values".
4070 * copying.c (_initialize_copying): Ditto for "show copying" and
4072 * cli/cli-cmds.c (init_cli_cmds): Ditto for "show commands" and
4074 * cli/cli-setshow.c (cmd_show_list): Skip "show" commands for
4075 which there is no corresponding "set" command (eg. "show copying").
4077 2011-02-14 Pedro Alves <pedro@codesourcery.com>
4078 Jan Kratochvil <jan.kratochvil@redhat.com>
4080 * exec.c (section_table_available_memory): Change `len' parameter
4082 * exec.h (section_table_available_memory): Ditto.
4083 * value.h (read_value_memory): Rename the `offset' parameter to
4086 2011-02-14 Pedro Alves <pedro@codesourcery.com>
4087 Jan Kratochvil <jan.kratochvil@redhat.com>
4089 * memrange.c (compare_mem_ranges): Mention sort order in
4091 (normalize_mem_ranges): Add comment. Fix ra->length calculation.
4092 * tracepoint.c (traceframe_available_memory): Extend comment to
4093 mention what happens to RESULT when the target does not support
4096 2011-02-14 Pedro Alves <pedro@codesourcery.com>
4097 Jan Kratochvil <jan.kratochvil@redhat.com>
4099 * value.c (mark_value_bytes_unavailable): Fix indexing the `bef'
4102 2011-02-14 Pedro Alves <pedro@codesourcery.com>
4104 * value.c (value_bits_valid, value_bits_synthetic_pointer):
4105 No longer handle NULL values.
4107 2011-02-14 Pedro Alves <pedro@codesourcery.com>
4109 * exceptions.h (NOT_AVAILABLE_ERROR): New error.
4110 * value.c: Include "exceptions.h".
4111 (require_available): Throw NOT_AVAILABLE_ERROR instead of a
4113 * cp-abi.c: Include gdb_assert.h.
4114 (baseclass_offset): Add `embedded_offset' and `val' parameters.
4115 Assert the method is implemented. Wrap NOT_AVAILABLE_ERROR
4117 * cp-abi.h (baseclass_offset): Add `embedded_offset' and `val'
4118 parameters. No longer returns -1 on error.
4119 (struct cp_abi_ops) <baseclass_offset>: Add `embedded_offset' and
4121 * cp-valprint.c: Include exceptions.h.
4122 (cp_print_value): Handle NOT_AVAILABLE_ERROR errors when fetching
4123 the baseclass_offset. Handle unavailable base classes. Use
4124 val_print_invalid_address.
4125 * p-valprint.c: Include exceptions.h.
4126 (pascal_object_print_value): Handle NOT_AVAILABLE_ERROR errors
4127 when fetching the baseclass_offset. No longer expect
4128 baseclass_offset returning -1. Handle unavailable base classes.
4129 Use val_print_invalid_address.
4130 * valops.c (dynamic_cast_check_1): Rename `contents' parameter to
4131 `valaddr' parameter, and change its type to gdb_byte pointer. Add
4132 `embedded_offset' and `val' parameters. Adjust.
4133 (dynamic_cast_check_2): Rename `contents' parameter to `valaddr'
4134 parameter, and change its type to gdb_byte pointer. Add
4135 `embedded_offset' and `val' parameters. Adjust. No longer expect
4136 baseclass_offset returning -1.
4137 (value_dynamic_cast): Use value_contents_for_printing rather than
4138 value_contents. Adjust.
4139 (search_struct_field): No longer expect baseclass_offset returning
4141 (search_struct_method): If reading memory from the target is
4142 necessary, wrap it in a new value to pass to baseclass_offset. No
4143 longer expect baseclass_offset returning -1.
4144 (find_method_list): No longer expect baseclass_offset returning
4145 -1. Use value_contents_for_printing rather than value_contents.
4146 * valprint.c (val_print_invalid_address): New function.
4147 * valprint.h (val_print_invalid_address): Declare.
4148 * gdbtypes.c (is_unique_ancestor_worker): New `embedded_offset'
4149 and `val' parameters. No longer expect baseclass_offset returning
4151 * gnu-v2-abi.c: Include "exceptions.h".
4152 (gnuv2_baseclass_offset): Add `embedded_offset' and `val'
4153 parameters. Handle unavailable memory. Recurse through
4154 gnuv2_baseclass_offset directly, rather than through
4155 baseclass_offset. No longer returns -1 on not found, instead
4157 * gnu-v3-abi.c (gnuv3_baseclass_offset): Add `embedded_offset' and
4158 `val' parameters. Adjust.
4160 2011-02-14 Pedro Alves <pedro@codesourcery.com>
4162 * tracepoint.c (memrange_sortmerge): Don't merge ranges that are
4163 almost but not quite adjacent.
4165 2011-02-14 Pedro Alves <pedro@codesourcery.com>
4167 * value.h (value_entirely_available): Declare.
4168 * value.c (value_entirely_available): New function.
4169 * c-valprint.c (c_value_print): Don't try fetching the pointer's
4170 real type if the pointer is unavailable.
4172 2011-02-14 Pedro Alves <pedro@codesourcery.com>
4174 * valops.c (value_repeat): Use read_value_memory instead of
4177 2011-02-14 Pedro Alves <pedro@codesourcery.com>
4179 * value.h (value_contents_copy, value_contents_copy_raw): Declare.
4180 * value.c (value_contents_copy_raw, value_contents_copy): New
4182 (value_primitive_field): Use value_contents_copy_raw instead of
4184 * valops.c (value_fetch_lazy): Use value_contents_copy instead of
4186 (value_array, value_slice): Ditto.
4187 * valarith.c (value_subscripted_rvalue): Use
4188 value_contents_copy_raw instead of memcpy.
4190 2011-02-14 Pedro Alves <pedro@codesourcery.com>
4192 <unavailable> references.
4194 * valops.c (get_value_at): Use value_from_contents_and_address,
4195 avoiding read_memory.
4197 2011-02-14 Pedro Alves <pedro@codesourcery.com>
4199 * c-valprint.c (c_val_print): Print a string with unavailable
4200 contents as an array.
4202 2011-02-14 Pedro Alves <pedro@codesourcery.com>
4204 * value.h (unpack_bits_as_long): Delete declaration.
4205 (unpack_value_bits_as_long): Declare.
4206 (unpack_value_field_as_long): Declare.
4207 (value_field_bitfield): Declare.
4208 * value.c (unpack_bits_as_long): Rename to...
4209 (unpack_value_bits_as_long_1): ... this. Add embedded_offset and
4210 value parameters. Return the extracted result in a new output
4211 parameter. If the value contents are unavailable, return false,
4212 otherwise return true.
4213 (unpack_value_bits_as_long): New.
4214 (unpack_field_as_long): Rename to...
4215 (unpack_value_field_as_long_1): ... this. Add embedded_offset and
4216 Add embedded_offset and value parameters. Return the extracted
4217 result in a new output parameter. If the value contents are
4218 unavailable, return false, otherwise return true.
4219 (unpack_value_field_as_long): New.
4220 (unpack_field_as_long_1): New.
4221 (unpack_field_as_long): Reimplement as wrapper around
4222 unpack_value_field_as_long_1.
4223 (value_field_bitfield): New function.
4224 * valops.c (value_fetch_lazy): When fetching a bitfield, use
4225 unpack_value_bits_as_long. Mark the value as unavailable, if it
4227 * jv-valprint.c (java_print_value_fields): Use
4228 value_field_bitfield.
4229 * p-valprint.c (pascal_object_print_value_fields): Use
4230 value_field_bitfield.
4231 * cp-valprint.c (cp_print_value_fields): Use value_field_bitfield.
4233 2011-02-14 Pedro Alves <pedro@codesourcery.com>
4235 * value.c (get_internalvar_integer): Also return the int value of
4236 TYPE_CODE_INT INTERNALVAR_VALUE values.
4237 (set_internalvar): Don't special case TYPE_CODE_INT.
4239 2011-02-14 Pedro Alves <pedro@codesourcery.com>
4241 * value.c (struct internalvar) <enum internalvar_kind>: Remove
4242 INTERNALVAR_POINTER.
4244 (value_of_internalvar): Remove INTERNALVAR_POINTER handling.
4245 (set_internalvar): Remove special TYPE_CODE_PTR handling.
4246 (preserve_one_internalvar): Remove INTERNALVAR_POINTER handling.
4248 2011-02-14 Pedro Alves <pedro@codesourcery.com>
4250 * value.h (value_available_contents_eq): Declare.
4251 * value.c (find_first_range_overlap): New function.
4252 (value_available_contents_eq): New function.
4253 * valprint.c (val_print_array_elements): Use
4254 value_available_contents_eq.
4255 * ada-valprint.c (val_print_packed_array_elements): Use
4256 value_available_contents_eq.
4257 * jv-valprint.c (java_value_print): Use
4258 value_available_contents_eq.
4260 2011-02-14 Pedro Alves <pedro@codesourcery.com>
4262 * target.c (target_read_live_memory): New function.
4263 (memory_xfer_live_readonly_partial): New.
4264 (memory_xfer_partial): If reading from a traceframe, fallback to
4265 reading unavailable read-only memory from read-only regions of
4267 * tracepoint.c (disconnect_tracing): Adjust.
4268 (set_current_traceframe): New, factored out from
4269 set_traceframe_number.
4270 (set_traceframe_number): Reimplement to only change the traceframe
4271 number on the GDB side.
4272 (do_restore_current_traceframe_cleanup): Adjust.
4273 (make_cleanup_restore_traceframe_number): New.
4274 (cur_traceframe_number): New global.
4275 (tfile_open): Set cur_traceframe_number to no traceframe.
4276 (set_tfile_traceframe): New function.
4277 (tfile_trace_find): If looking up a traceframe using any method
4278 other than by number, make sure the current tfile traceframe
4279 matches gdb's current traceframe. Update the current tfile
4280 traceframe if the lookup succeeded.
4281 (tfile_fetch_registers, tfile_xfer_partial)
4282 (tfile_get_trace_state_variable_value): Make sure the remote
4283 traceframe matches gdb's current traceframe.
4284 * remote.c (remote_traceframe_number): New global.
4285 (remote_open_1): Set it to -1.
4286 (set_remote_traceframe): New function.
4287 (remote_fetch_registers, remote_store_registers)
4288 (remote_xfer_memory, remote_xfer_partial)
4289 (remote_get_trace_state_variable_value): Make sure the remote
4290 traceframe matches gdb's current traceframe.
4291 (remote_trace_find): If looking up a traceframe using any method
4292 other than by number, make sure the current remote traceframe
4293 matches gdb's current traceframe. Update the current remote
4294 traceframe if the lookup succeeded.
4295 * infrun.c (fetch_inferior_event): Adjust.
4296 * tracepoint.h (set_current_traceframe): Declare.
4297 (get_traceframe_number, set_traceframe_number): Add describing
4300 2011-02-14 Pedro Alves <pedro@codesourcery.com>
4302 Mark pieces of values as unavailable if the corresponding memory
4305 * valops.c: Include tracepoint.h.
4306 (value_fetch_lazy): Use read_value_memory.
4307 (read_value_memory): New.
4308 * value.h (read_value_memory): Declare.
4309 * dwarf2loc.c (read_pieced_value): Use read_value_memory.
4310 * exec.c (section_table_available_memory): New function.
4311 * exec.h (section_table_available_memory): Declare.
4313 2011-02-14 Pedro Alves <pedro@codesourcery.com>
4315 * Makefile.in (SFILES): Add memrange.c.
4316 (HFILES_NO_SRCDIR): Add memrange.h.
4317 (COMMON_OBS): Add memrange.o.
4318 * memrange.c: New file.
4319 * memrange.h: New file.
4320 * tracepoint.c: Include memrange.h.
4321 (struct mem_range): Delete.
4322 (mem_range_s): Delete.
4323 (traceframe_available_memory): New function.
4324 * tracepoint.h (traceframe_available_memory): Declare.
4326 2011-02-14 Pedro Alves <pedro@codesourcery.com>
4328 * target.h (struct traceframe_info): Forward declare.
4329 (enum target_object): Add TARGET_OBJECT_TRACEFRAME_INFO.
4330 (struct target_ops) <to_traceframe_info>: New field.
4331 (target_traceframe_info): New.
4332 * target.c (update_current_target): Inherit and default
4334 * remote.c (PACKET_qXfer_traceframe_info): New.
4335 (remote_protocol_features): Register qXfer:traceframe-info:read.
4336 (remote_xfer_partial): Handle TARGET_OBJECT_TRACEFRAME_INFO.
4337 (remote_traceframe_info): New.
4338 (init_remote_ops): Install it.
4339 (_initialize_remote): Install "set/show remote traceframe-info"
4341 * tracepoint.h (parse_traceframe_info): Declare.
4342 * tracepoint.c (struct mem_range): New.
4343 (mem_range_s): New typedef.
4344 (struct traceframe_info): New.
4345 (traceframe_info): New global.
4346 (free_traceframe_info): New function.
4347 (clear_traceframe_info): New function.
4348 (start_tracing, tfind_1, set_traceframe_number): Clear traceframe
4350 (build_traceframe_info): New function.
4351 (tfile_traceframe_info): New function.
4352 (init_tfile_ops): Install tfile_traceframe_info.
4353 (traceframe_info_start_memory, free_result): New functions.
4354 (memory_attributes, traceframe_info_elements): New globals.
4355 (parse_traceframe_info, get_traceframe_info): New functions.
4356 * features/traceframe-info.dtd: New file.
4357 * Makefile.in (XMLFILES): Add traceframe-info.dtd.
4359 2011-02-14 Pedro Alves <pedro@codesourcery.com>
4361 Base support for <unavailable> value contents.
4363 * value.h (value_bytes_available): Declare.
4364 (mark_value_bytes_unavailable): Declare.
4365 * value.c (struct range): New struct.
4366 (range_s): New typedef.
4367 (ranges_overlap): New function.
4368 (range_lessthan): New function.
4369 (ranges_contain_p): New function.
4370 (struct value) <unavailable>: New field.
4371 (value_bytes_available): New function.
4372 (mark_value_bytes_unavailable): New function.
4373 (require_not_optimized_out): Constify parameter.
4374 (require_available): New function.
4375 (value_contents_all, value_contents): Require all bytes be
4377 (value_free): Free `unavailable'.
4378 (value_copy): Copy `unavailable'.
4379 * valprint.h (val_print_unavailable): Declare.
4380 * valprint.c (valprint_check_validity): Rename `offset' parameter
4381 to `embedded_offset'. If printing a scalar, check whether the
4382 value chunk is available.
4383 (val_print_unavailable): New.
4384 (val_print_scalar_formatted): Check whether the value is
4386 * python/py-prettyprint.c (apply_val_pretty_printer): Refuse
4387 pretty-printing unavailable values.
4389 2011-02-13 Jan Kratochvil <jan.kratochvil@redhat.com>
4391 Fix const/volatile qualifiers of C++ types, PR c++/12328.
4392 * c-typeprint.c (c_type_print_args): Update the function comment. New
4393 variable param_type, initialize it. Remove const/volatile qualifiers
4394 for language_cplus and !show_artificial. Use param_type.
4396 2011-02-13 Jan Kratochvil <jan.kratochvil@redhat.com>
4398 * symtab.c (find_pc_sect_line): New variable objfile, initialize it
4399 from S. Iterate S using ALL_OBJFILE_SYMTABS. Verify BV for each S.
4400 * symtab.h (struct symtab) <next>: Comment extension.
4402 2011-02-12 Yao Qi <yao@codesourcery.com>
4404 * Makefile.in (CLEANDIRS): Remove duplicated common dir.
4406 2011-02-11 Yao Qi <yao@codesourcery.com>
4408 * common/Makefile.in: Add copyright header.
4410 2011-02-11 Pedro Alves <pedro@codesourcery.com>
4412 * infrun.c (proceed): Move switching out and in of tfind mode from
4414 (fetch_inferior_event): ... to here.
4416 2011-02-11 Yao Qi <yao@codesourcery.com>
4418 * Makefile.in: Remove signals.o from COMMON_OBS. Link
4420 * configure.ac: Add common to sub dir.
4421 * configure: Regenerate.
4423 2011-02-11 Yao Qi <yao@codesourcery.com>
4427 * common/Makefile.in: New.
4428 * common/configure.ac: New.
4429 * common/aclocal.m4: New.
4430 * common/configure: Generate.
4432 2011-02-10 Pedro Alves <pedro@codesourcery.com>
4434 * vec.h (VEC_block_remove): Place VEC_ASSERT_INFO on the right
4435 side of the parenthesis.
4438 2010-07-13 Jakub Jelinek <jakub@redhat.com>
4439 * vec.h (VEC_block_remove): Fix comment.
4441 2011-02-08 Michael Snyder <msnyder@vmware.com>
4443 * linux-nat.c (linux_nat_filter_event): Fix typo in comment.
4445 2011-02-08 Jan Kratochvil <jan.kratochvil@redhat.com>
4447 * i386-tdep.c (i386_process_record): Rename l suffixes to d suffixes
4448 in comments for pcmpgtd, pcmpeqd, psubd, paddd, pcmpgtd, pcmpeqd,
4451 2011-02-08 Jan Kratochvil <jan.kratochvil@redhat.com>
4454 * i386-tdep.c (i386_process_record) <0x660f3807>: Fix the comment to
4456 (i386_process_record) <lddqu>: Fix the opcode to 0xf20ff0.
4457 (i386_process_record) <0x0f3807>: Fix the comment to phsubsw.
4459 2011-02-08 Ulrich Weigand <uweigand@de.ibm.com>
4461 * dwarf2read.c (read_subroutine_type): Set special calling
4462 convention flag for functions compiled by IBM XL C for OpenCL.
4463 * ppc-sysv-tdep.c: Include "dwarf2.h"
4464 (ppc_sysv_abi_push_dummy_call): Implement IBM OpenCL vector types
4466 (do_ppc_sysv_return_value): Add FUNC_TYPE argument. Implement
4467 IBM OpenCL vector types calling convention.
4468 (ppc_sysv_abi_return_value): Pass through FUNC_TYPE.
4469 (ppc_sysv_abi_broken_return_value): Likewise.
4470 (ppc64_sysv_abi_push_dummy_call): Implement IBM OpenCL vector
4471 types calling convention.
4472 (ppc64_sysv_abi_return_value): Likewise.
4473 * spu-tdep.c: Include "dwarf2.h"
4474 (spu_return_value): Implement IBM OpenCL vector types calling
4477 2011-02-08 Ulrich Weigand <uweigand@de.ibm.com>
4479 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): Implement
4480 correct ABI for AltiVec vector arguments.
4482 2011-02-07 Pedro Alves <pedro@codesourcery.com>
4484 * valprint.c (val_print): Extend comment.
4485 * ada-valprint.c (ada_valprint): Rewrite comment deferring
4486 interface explanation to val_print.
4487 (ada_val_print_array): Adjust comment to current interface.
4488 (print_field_values): Adjust comment to current interface.
4489 * c-valprint.c (c_val_print): Rewrite comment deferring interface
4490 explanation to val_print.
4491 * f-valprint.c (f_val_print): Ditto.
4492 * jv-valprint.c (java_val_print): Ditto.
4493 * m2-valprint.c (m2_val_print): Ditto.
4494 * p-valprint.c (pascal_val_print): Ditto.
4496 2011-02-07 Thiago Jung Bauermann <bauerman@br.ibm.com>
4498 * breakpoint.c (parse_breakpoint_sals): Fix description.
4500 2011-02-04 Sami Wagiaalla <swagiaal@redhat.com>
4501 Oguz Kayral <oguzkayral@gmail.com>
4503 * python/py-inferior.c (python_on_normal_stop): New function.
4504 (python_on_resume): New function.
4505 (python_inferior_exit): New function.
4506 (gdbpy_initialize_inferior): Add normal_stop, target_resumed, and
4507 inferior_exit observers.
4508 * python/py-evtregistry.c: New file.
4509 * python/py-threadevent.c : New file.
4510 * python/py-event.c: New file.
4511 * python/py-evts.c: New file.
4512 * python/py-continueevent.c: New file.
4513 * python/py-bpevent.c: New file.
4514 * python/py-signalevent.c: New file.
4515 * python/py-exetiedevent.c: New file.
4516 * python/py-breakpoint.c (gdbpy_breakpoint_from_bpstats): New function.
4517 Move struct breakpoint_object from here...
4518 * python/python-internal.h: ... to here.
4519 * python/py-event.h: New file.
4520 * python/py-events.h: New file.
4521 * Makefile.in (SUBDIR_PYTHON_OBS): Add py-breakpointstopevent.o,
4522 py-continueevent.o, py-event.o, py-eventregistry.o, py-events.o,
4523 py-exitedevent.o, py-signalstopevent.o, and py-stopevent.o.
4524 (SUBDIR_PYTHON_SRCS): Add py-breakpointstopevent.c,
4525 py-continueevent.c, py-event.c, py-eventregistry.c, py-events.c,
4526 py-exitedevent.c, py-signalstopevent.c, and py-stopevent.c.
4527 Add build rules for all the above.
4529 2011-02-04 Tom Tromey <tromey@redhat.com>
4531 * dwarf2read.c (dwarf2_section_empty_p): New function.
4532 (dwarf2_read_section): Use dwarf2_section_empty_p.
4533 (dwarf2_section_size): New function.
4534 (dwarf2_get_section_info): Unconditionally read section.
4535 (dwarf2_read_index): Use dwarf2_section_empty_p.
4536 (partial_read_comp_unit_head): Use dwarf2_section_size.
4537 (dwarf2_symbol_mark_computed): Likewise.
4539 2011-02-04 David Daney <ddaney@caviumnetworks.com>
4541 * NEWS: Add item for "catch syscall" on mips*-linux* targets.
4543 2011-02-04 David Daney <ddaney@caviumnetworks.com>
4545 * mips-linux-tdep.c: Include xml-syscall.h.
4546 (mips_linux_get_syscall_number): New function.
4547 (mips_linux_init_abi): Add calls to
4548 mips_linux_get_syscall_number() and set_xml_syscall_file_name().
4549 * data-directory/Makefile.in (SYSCALLS_FILES): Add
4550 mips-o32-linux.xml, mips-n32-linux.xml and mips-n64-linux.xml
4551 * syscalls/mips-n32-linux.xml: New file.
4552 * syscalls/mips-n64-linux.xml: New file.
4553 * syscalls/mips-o32-linux.xml: New file.
4555 2011-02-04 Ulrich Weigand <ulrich.weigand@linaro.org>
4557 * dwarf2read.c (dwarf2_ranges_read): Skip empty range entries.
4558 Complain about inverted range entries.
4559 (dwarf2_record_block_ranges): Likewise.
4561 2011-02-04 Thiago Jung Bauermann <bauerman@br.ibm.com>
4564 * breakpoint.c (update_watchpoint): Fix name of the
4565 update_global_location_list function.
4566 (print_one_breakpoint): Fix typo.
4567 (_initialize_breakpoint): Remove extra space in hbreak help
4569 * breakpoint.h (struct bp_location) <length>: Fix field
4572 2011-02-04 Pedro Alves <pedro@codesourcery.com>
4574 * regcache.c (registers_changed_ptid): Don't explictly always
4575 clear `current_regcache'. Only clear current_thread_ptid and
4576 current_thread_arch when PTID matches. Only reinit the frame
4577 cache if PTID matches the current inferior_ptid. Move alloca(0)
4579 (registers_changed): ... here.
4581 2011-02-03 Ulrich Weigand <ulrich.weigand@linaro.org>
4583 * arm-tdep.c (arm_skip_stack_protector): Accept any symbol that
4584 starts with __stack_chk_guard as stack guard symbol.
4586 2011-02-03 Andrew Burgess <aburgess@broadcom.com>
4588 * disasm.c (compare_lines): Handle the end of sequence markers
4589 within the line table to better support disassembling over
4590 compilation unit boundaries.
4592 2011-02-02 Ulrich Weigand <ulrich.weigand@linaro.org>
4594 * arm-tdep.c (skip_prologue_function): Add GDBARCH and IS_THUMB
4595 arguments. Skip in-prologue calls to glibc __aeabi_read_tp
4596 implementation even if no symbols are available.
4597 (thumb_analyze_prologue): Update call to skip_prologue_function.
4598 (arm_analyze_prologue): Likewise.
4600 2011-02-02 Ulrich Weigand <ulrich.weigand@linaro.org>
4602 * arm-tdep.c: Include "observer.h".
4603 (arm_prologue_this_id): Use frame PC if get_frame_func returns 0.
4604 (arm_exidx_data_key): New static variable.
4605 (struct arm_exidx_entry, arm_exidx_entry_s): New data types.
4606 (struct arm_exidx_data): Likewise.
4607 (arm_exidx_data_free): New function.
4608 (arm_compare_exidx_entries): Likewise.
4609 (arm_obj_section_from_vma): Likewise.
4610 (arm_exidx_new_objfile): Likewise.
4611 (arm_find_exidx_entry): Likewise.
4612 (arm_exidx_fill_cache): Likewise.
4613 (arm_exidx_unwind_sniffer): Likewise.
4614 (arm_exidx_unwind): New global variable.
4615 (arm_gdbarch_init): Append unwinder arm_exidx_unwind.
4616 (_initialize_arm_tdep): Attach arm_exidx_new_objfile to new_objfile
4617 observer. Register arm_exidx_data_key as objfile data.
4619 2011-02-02 Ulrich Weigand <ulrich.weigand@linaro.org>
4621 * arm-tdep.c (arm_analyze_load_stack_chk_guard): Avoid build break
4622 due to accessing uninitialized variable. Fix indentation.
4624 2011-02-02 Pedro Alves <pedro@codesourcery.com>
4626 * c-valprint.c (c_value_print): When doing virtual base pointer
4627 adjustment, create a new value with adjusted contents rather than
4628 changing the contents of the value being printed (and getting it
4631 2011-02-02 Pedro Alves <pedro@codesourcery.com>
4633 * xml-support.c (xml_find_attribute): New.
4634 (xinclude_start_include): Use it.
4635 * xml-support.h (xml_find_attribute): Declare.
4636 * memory-map.c (memory_map_start_memory)
4637 (memory_map_start_property): Use xml_find_attribute.
4638 * osdata.c (osdata_start_osdata, osdata_start_column): Use
4640 * remote.c (start_thread): Use xml_find_attribute.
4641 * solib-target.c (library_list_start_segment)
4642 (library_list_start_section, library_list_start_library)
4643 (library_list_start_list): Use xml_find_attribute.
4644 * xml-tdesc.c (tdesc_start_target, tdesc_start_feature)
4645 (tdesc_start_union, tdesc_start_struct, tdesc_start_flags)
4646 (tdesc_start_field): Use xml_find_attribute.
4648 2011-02-02 Ulrich Weigand <uweigand@de.ibm.com>
4650 * opencl-lang.c (STRINGIFY): Rename to OCL_STRING.
4651 (BUILD_OCL_VTYPES): Update.
4653 2011-02-02 Joel Brobecker <brobecker@adacore.com>
4655 * configure.ac: Work around non-GNU sed limitation when computing
4656 python version number.
4657 * configure: Regenerate.
4659 2011-02-01 Jan Kratochvil <jan.kratochvil@redhat.com>
4661 Fix debug printing of TYPE_INSTANCE.
4662 * expprint.c (print_subexp_standard) <TYPE_INSTANCE>: New.
4663 (dump_subexp_body_standard) <TYPE_INSTANCE>: New.
4665 2011-02-01 Jan Kratochvil <jan.kratochvil@redhat.com>
4667 Fix debug printing of BINOP_IN, OP_OBJC_MSGCALL,
4668 OP_F77_UNDETERMINED_ARGLIST, OP_COMPLEX, OP_OBJC_SELECTOR, OP_NAME,
4669 OP_OBJC_NSSTRING, OP_F90_RANGE and OP_DECFLOAT.
4670 * ada-operator.inc: Rename the file to ...
4671 * ada-operator.def: ... here, wrap all the entries by macro OP.
4672 * expprint.c (op_name_standard): Remove all the entries. Include
4673 "std-operator.def" instead.
4674 * expression.h (enum exp_opcode): Include "std-operator.def" and
4675 "ada-operator.def". Move all the entries ...
4676 * std-operator.def: ... here, wrap all the entries by macro OP.
4678 2011-01-31 Paul Pluzhnikov <ppluzhnikov@google.com>
4680 * breakpoint.h (remove_jit_event_breakpoints): New prototype.
4681 * breakpoint.c (remove_jit_event_breakpoints): New function.
4682 * jit.c (jit_descriptor_addr): Delete.
4683 (registering_code): Delete.
4684 (clear_int): Delete.
4685 (jit_inferior_data): New variable.
4686 (struct jit_inferior_data): New type.
4687 (get_jit_inferior_data): New function.
4688 (jit_inferior_data_cleanup): New function.
4689 (jit_read_descriptor): Adjust.
4690 (jit_register_code): Adjust.
4691 (jit_breakpoint_re_set_internal): New function; move code here ...
4692 (jit_inferior_init): ... from here.
4693 (jit_breakpoint_re_set): Adjust.
4694 (jit_reset_inferior_data_and_breakpoints): New function.
4695 (jit_inferior_created_observer): Adjust.
4696 (jit_inferior_exit_hook): Adjust.
4697 (jit_executable_changed_observer): New function.
4698 (jit_event_handler): Adjust.
4699 (_initialize_jit): Adjust.
4701 2011-01-31 Michael Snyder <msnyder@vmware.com>
4703 * m32r-tdep.c (m32r_gdbarch_init): Replace accidentally deleted
4706 2011-01-31 Tom Tromey <tromey@redhat.com>
4709 * python/python.c (execute_gdb_command): Call
4710 prevent_dont_repeat.
4711 * top.c (suppress_dont_repeat): New global.
4712 (dont_repeat): Use it.
4713 (prevent_dont_repeat): New function.
4714 * command.h (prevent_dont_repeat): Declare.
4716 2011-01-31 Tom Tromey <tromey@redhat.com>
4718 * infcmd.c (finish_backward): Use breakpoint_set_silent.
4719 * python/py-breakpoint.c (bppy_set_silent): Use
4720 breakpoint_set_silent.
4721 (bppy_set_thread): Use breakpoint_set_thread.
4722 (bppy_set_task): Use breakpoint_set_task.
4723 * breakpoint.h (breakpoint_set_silent, breakpoint_set_thread)
4724 (breakpoint_set_task): Declare.
4725 (make_breakpoint_silent): Remove.
4726 * breakpoint.c (breakpoint_set_silent): New function.
4727 (breakpoint_set_thread): Likewise.
4728 (breakpoint_set_task): Likewise.
4729 (make_breakpoint_silent): Remove.
4731 2011-01-31 Tom Tromey <tromey@redhat.com>
4733 * breakpoint.h (user_breakpoint_p): Declare.
4734 * breakpoint.c (user_breakpoint_p): New function.
4735 (breakpoint_1): Use it.
4736 (save_breakpoints): Likewise.
4738 2011-01-31 Joel Brobecker <brobecker@adacore.com>
4740 * configure.ac: Add handling of Python distribution on Windows.
4741 * python-config.py: If the LIBS, SYSLIBS, LIBPL and/or LINKFORSHARED
4742 sysconfig variables are not defined, then do not use them.
4743 On Windows, if LIBPL is not defined, then use prefix + '/libs'
4744 instead. On Windows, return all paths using forward-slashes
4745 rather than backslashes.
4747 2011-01-31 Joel Brobecker <brobecker@adacore.com>
4749 * configure.ac: Remove fallback behavior for building
4750 against Python. Remove tweaking of Python include path.
4751 Add PYTHON_CPPFLAGS and PYTHON_LIBS substitution.
4752 (AC_TRY_LIBPYTHON): Adjust program used in linking test.
4753 If link is successful, set PYTHON_CPPFLAGS and PYTHON_LIBS.
4754 Always restore CPPFLAGS and LIBS after linking test.
4755 * configure: Regenerated.
4756 * Makefile.in (INTERNAL_CPPFLAGS): Add @PYTHON_CPPFLAGS@.
4757 (INSTALLED_LIBS, CLIBS): Add @PYTHON_LIBS@.
4758 * python/python-internal.h: Adjust includes of Python .h files.
4760 2011-01-31 Joel Brobecker <brobecker@adacore.com>
4762 * tracepoint.c (traceframe_walk_blocks): Add missing i18n markup
4765 2011-01-31 Joel Brobecker <brobecker@adacore.com>
4767 * inflow.c (gdb_has_a_terminal): Fix typo in interactive_mode
4770 2011-01-31 Yao Qi <yao@codesourcery.com>
4772 * arm-linux-nat.c: Update calls to regcache_register_status
4773 instead of regcache_valid_p.
4774 * aix-thread.c: Likewise.
4775 * i386gnu-nat.c: Likewise.
4777 2011-01-29 Jan Kratochvil <jan.kratochvil@redhat.com>
4780 * valops.c (compare_parameters): Verify TYPE_NFIELDS before
4781 touching TYPE_FIELD_ARTIFICIAL.
4783 2011-01-28 Richard Earnshaw <rearnsha@arm.com>
4785 * MAINTAINERS: Move myself from Responsible Maintainers to Authorized
4788 2011-01-28 Pedro Alves <pedro@codesourcery.com>
4790 * tracepoint.c (tfile_xfer_partial): If there's no traceframe
4791 selected, don't try iterating over the traceframe's blocks.
4792 (tfile_has_stack): If there's no traceframe selected, then there's
4794 (tfile_has_registers): If there's no traceframe selected, then
4795 there's no registers.
4797 2011-01-28 Pedro Alves <pedro@codesourcery.com>
4799 * target.c (memory_xfer_partial): No need to restore shadows if we
4800 haven't read anything.
4802 2011-01-28 Pedro Alves <pedro@codesourcery.com>
4804 * mips-tdep.c (mips_print_register): Use get_frame_register_value
4805 and val_print_scalar_formatted.
4807 2011-01-27 Pedro Alves <pedro@codesourcery.com>
4809 * tracepoint.c (tfile_read): New.
4810 (tfile_open): Use it.
4811 (tfile_get_traceframe_address): Use it.
4812 (tfile_trace_find): Use it.
4813 (walk_blocks_callback_func): New typedef.
4814 (match_blocktype): New function.
4815 (traceframe_walk_blocks): New function.
4816 (traceframe_find_block_type): New function.
4817 (tfile_fetch_registers, tfile_xfer_partial)
4818 (tfile_get_trace_state_variable_value): Use
4819 traceframe_find_block_type and tfile_read.
4821 2011-01-26 Kevin Buettner <kevinb@redhat.com>
4823 * remote-mips.c: Add internationalization mark ups. Remove
4824 trailing \n from already marked up strings.
4826 2011-01-26 Tom Tromey <tromey@redhat.com>
4828 * python/py-prettyprint.c (print_string_repr): Clear
4829 'addressprint' option when calling val_print_string.
4830 (print_children): Handle Val_pretty_default. Clear 'addressprint'
4831 option when calling val_print_string.
4833 2011-01-26 Tom Tromey <tromey@redhat.com>
4835 * python/python.c (gdbpy_solib_name): Use gdb_py_longest and
4837 * python/python-internal.h (GDB_PY_LL_ARG, GDB_PY_LLU_ARG): New
4839 (gdb_py_longest, gdb_py_ulongest): New typedefs.
4840 (gdb_py_long_from_longest, gdb_py_long_from_ulongest)
4841 (gdb_py_long_as_ulongest): New defines.
4842 (gdb_py_object_from_longest, gdb_py_object_from_ulongest)
4843 (gdb_py_int_as_long): Declare.
4844 * python/py-value.c (valpy_lazy_string): Use gdb_py_longest,
4845 GDB_PY_LL_ARG, gdb_py_object_from_longest.
4846 (valpy_long): Add comment.
4847 * python/py-utils.c (get_addr_from_python): Use
4848 gdb_py_long_as_ulongest. Handle overflow properly.
4849 (gdb_py_object_from_longest): New function.
4850 (gdb_py_object_from_ulongest): Likewise.
4851 (gdb_py_int_as_long): Likewise.
4852 * python/py-type.c (typy_array): Use gdb_py_int_as_long.
4853 * python/py-symtab.c (salpy_get_pc): Use
4854 gdb_py_long_from_ulongest.
4855 (salpy_get_line): Use PyInt_FromLong.
4856 * python/py-param.c (set_parameter_value): Use
4858 * python/py-lazy-string.c (stpy_get_address): Use
4859 gdb_py_long_from_ulongest.
4860 * python/py-frame.c (frapy_pc): Use gdb_py_long_from_ulongest.
4861 * python/py-cmd.c (cmdpy_completer): Use gdb_py_int_as_long.
4862 * python/py-breakpoint.c (bppy_set_thread): Use
4864 (bppy_set_task): Likewise.
4865 (bppy_set_ignore_count): Likewise.
4866 (bppy_set_hit_count): Likewise.
4867 * python/py-block.c (blpy_get_start): Use
4868 gdb_py_object_from_ulongest.
4869 (blpy_get_end): Likewise.
4870 (gdbpy_block_for_pc): Use gdb_py_ulongest and GDB_PY_LLU_ARG.
4872 2011-01-25 Mathieu Lacage <mathieu.lacage@inria.fr>
4875 * gdb/objfiles.h (struct objfile) <addr_low>: New field.
4876 * gdb/solib.c (solib_read_symbols): Check for addr_low in
4877 equality test for objfile, initialize addr_low if needed.
4879 2011-01-25 Pedro Alves <pedro@codesourcery.com>
4881 * tui/tui-regs.c (tui_register_format): Remove dead code.
4883 2011-01-25 Pedro Alves <pedro@codesourcery.com>
4885 * printcmd.c (print_formatted): Use val_print_scalar_formatted
4886 instead of print_scalar_formatted.
4887 (print_scalar_formatted): Don't handle 's' format strings here,
4888 and add an assertion that we never see such format here.
4889 * valprint.h (val_print_scalar_formatted): Declare.
4890 * valprint.c (val_print_scalar_formatted): New.
4891 * c-valprint.c (c_val_print): Use val_print_scalar_formatted
4892 instead of print_scalar_formatted.
4893 * jv-valprint.c (java_val_print): Ditto.
4894 * p-valprint.c (pascal_val_print): Ditto.
4895 * ada-valprint.c (ada_val_print_1): Ditto.
4896 * f-valprint.c (f_val_print): Ditto.
4897 * infcmd.c (registers_info): Ditto.
4898 * m2-valprint.c (m2_val_print): Ditto.
4900 2011-01-25 Pedro Alves <pedro@codesourcery.com>
4902 * m2-valprint.c (print_unbounded_array): Pass
4903 value_contents_for_printing rather than value_contents, to
4904 m2_print_array_contents. Also pass in the value.
4906 2011-01-25 Jan Kratochvil <jan.kratochvil@redhat.com>
4908 * dwarf2read.c (dwarf2_read_index, write_psymtabs_to_index)
4909 (save_gdb_index_command): Switch to .gdb_index version 4.
4911 2011-01-25 Pedro Alves <pedro@codesourcery.com>
4913 * mi/mi-main.c (get_register): Use get_frame_register_value rather
4914 than frame_register, and always pass a valid value to val_print.
4916 2011-01-25 Pedro Alves <pedro@codesourcery.com>
4918 Centralize printing "<optimized out>".
4920 * valprint.h (val_print_optimized_out): Declare.
4921 * cp-valprint.c (cp_print_value_fields): Use
4922 val_print_optimized_out.
4923 * jv-valprint.c (java_print_value_fields): Ditto.
4924 * p-valprint.c (pascal_object_print_value_fields): Ditto.
4925 * printcmd.c (print_formatted): Ditto.
4926 * valprint.c (valprint_check_validity): Ditto.
4927 (value_check_printable): Ditto.
4928 (val_print_optimized_out): New.
4930 2011-01-25 Pedro Alves <pedro@codesourcery.com>
4932 * infcmd.c (default_print_registers_info): Allocate values so to
4933 never pass a NULL value to val_print.
4935 2011-01-25 Pedro Alves <pedro@codesourcery.com>
4937 * cp-valprint.c (cp_print_value): Treat the 'skip' local as
4938 boolean. Make sure to always pass a value that matches the
4939 contents buffer to callees. Preserve `address' for following
4941 * value.c (value_contents_for_printing_const): New.
4942 (value_address): Constify value argument.
4943 * value.h (value_contents_for_printing_const): Declare.
4944 (value_address): Constify value argument.
4946 2011-01-25 Pedro Alves <pedro@codesourcery.com>
4948 * regcache.c (struct regcache_descr): Rename
4949 sizeof_raw_register_valid_p field to sizeof_raw_register_status,
4950 and sizeof_cooked_register_valid_p to
4951 sizeof_cooked_register_status.
4952 (init_regcache_descr): Adjust.
4953 (struct regcache): Rename register_valid_p field to
4955 (regcache_xmalloc_1, regcache_xfree, regcache_save)
4956 (do_cooked_read): Adjust.
4957 (regcache_valid_p): Rename to ...
4958 (regcache_register_status): ... this. Adjust.
4959 (regcache_invalidate): Adjust.
4960 (regcache_raw_read, regcache_cooked_read, regcache_raw_write):
4962 (regcache_raw_supply): Adjust. If buf i NULL, mark the register
4963 as unavailable, not valid.
4964 (regcache_dump): Adjust.
4965 * regcache.h (enum register_status): New.
4966 (regcache_register_status): Declare.
4967 (regcache_invalidate): Delete declaration.
4968 * corelow.c (get_core_registers): Adjust.
4969 * tracepoint.c (tfile_fetch_registers): Adjust.
4970 * trad-frame.c (REG_VALUE): Rename to ...
4971 (TF_REG_VALUE): ... this.
4972 (REG_UNKNOWN): Rename to ...
4973 (TF_REG_UNKNOWN): ... this.
4974 (trad_frame_set_value, trad_frame_set_unknown): Adjust.
4975 * mi/mi-main.c (register_changed_p): Adjust.
4977 2011-01-25 Pedro Alves <pedro@codesourcery.com>
4979 * regcache.c (struct regcache_descr): Remove outdated comment.
4980 (init_regcache_descr): Remove sizeof_raw_register_valid_p
4982 (regcache_xmalloc): Rename to ...
4983 (regcache_xmalloc_1): ... this. Add `readonly_p' parameter.
4984 Allocate the regcache type accordingly.
4985 (regcache_xmalloc): New as wrapper around regcache_xmalloc_1.
4986 (regcache_xfree): Asser the source is also readonly. Copy sizeof
4987 cooked registers, not raw.
4988 (regcache_dup_no_passthrough): Delete.
4989 (get_thread_arch_regcache): Use regcache_xmalloc_1.
4990 * h8300-tdep.c (h8300_push_dummy_call): Tweak comment to not
4991 mention obsolete write_register_bytes.
4992 * regcache.h (regcache_dup_no_passthrough): Delete declaration.
4994 2011-01-25 Pedro Alves <pedro@codesourcery.com>
4996 Stop remote_read_bytes from handling partial reads itself.
4998 * remote-fileio.c: Include target.h.
4999 (remote_fileio_write_bytes): Delete.
5000 (remote_fileio_func_open, remote_fileio_func_write)
5001 (remote_fileio_func_rename, remote_fileio_func_unlink): Use
5003 (remote_fileio_func_stat): Use target_read_memory and
5004 target_write_memory.
5005 (remote_fileio_func_gettimeofday): Use target_write_memory.
5006 (remote_fileio_func_system): Use target_read_memory.
5007 * remote.c (remote_write_bytes): Make it static.
5008 (remote_read_bytes): Don't handle partial reads here.
5009 * remote.h (remote_read_bytes): Delete declaration.
5011 2011-01-25 Pedro Alves <pedro@codesourcery.com>
5013 Simplify XML parsing a bit.
5015 * xml-support.h (gdb_xml_parse_quick): Declare.
5016 * xml-support.c (gdb_xml_create_parser_and_cleanup_1): Renamed
5017 from gdb_xml_create_parser_and_cleanup, and added `old_chain'
5019 (gdb_xml_create_parser_and_cleanup): Reimplement on top of
5020 gdb_xml_create_parser_and_cleanup_1.
5021 (gdb_xml_parse_quick): New.
5022 * memory-map.c (parse_memory_map): Use gdb_xml_parse_quick.
5023 * osdata.c (osdata_parse): Ditto.
5024 * remote.c (remote_threads_info): Ditto.
5025 * solib-target.c (solib_target_parse_libraries): Ditto.
5026 * xml-syscall.c (syscall_parse_xml): Ditto.
5027 * xml-tdesc.c (tdesc_parse_xml): Ditto.
5029 2011-01-24 Kevin Buettner <kevinb@redhat.com>
5031 * configure.tgt (mips*-*-elf): New; just like mips*-*-*, but
5032 with remote-mips.o added to gdb_target_obs.
5033 * Makefile.in (ALL_TARGET_OBS): Add remote-mips.o.
5035 2011-01-24 Pedro Alves <pedro@codesourcery.com>
5037 * ada-valprint.c (val_print_packed_array_elements): Pass the
5038 correct struct value to val_print.
5039 (ada_val_print_1): Ditto.
5041 2011-01-24 Pedro Alves <pedro@codesourcery.com>
5043 Don't lose embedded_offset in printing routines throughout.
5045 * valprint.h (val_print_array_elements): Change prototype.
5046 * valprint.c (val_print_array_elements): Add `embedded_offset'
5047 parameter, and adjust to pass it down to val_print, while passing
5048 `valaddr' or `address' unmodified. Take embedded_offset into
5049 account when checking repetitions.
5050 * c-valprint.c (c_val_print): Pass embedded_offset to
5051 val_print_array_elements instead of adjusting `valaddr' and
5053 * m2-valprint.c (m2_print_array_contents, m2_val_print): Pass
5054 embedded_offset to val_print_array_elements instead of adjusting
5056 * p-lang.h (pascal_object_print_value_fields): Adjust prototype.
5057 * p-valprint.c (pascal_val_print): Pass embedded_offset to
5058 val_print_array_elements and pascal_object_print_value_fields
5059 instead of adjusting `valaddr'.
5060 (pascal_object_print_value_fields): Add `offset' parameter, and
5062 (pascal_object_print_value): Add `offset' parameter, and adjust to
5064 (pascal_object_print_static_field): Use
5065 value_contents_for_printing/value_embedded_offset, rather than
5067 * ada-valprint.c (val_print_packed_array_elements): Add `offset'
5068 parameter, and adjust to use it. Use
5069 value_contents_for_printing/value_embedded_offset, rather than
5071 (ada_val_print): Rename `valaddr0' parameter to `valaddr'.
5072 (ada_val_print_array): Add `offset' parameter, and adjust to use
5074 (ada_val_print_1): Rename `valaddr0' parameter to `valaddr', and
5075 `embedded_offset' to `offset'. Don't re-adjust `valaddr'.
5076 Instead work with offsets. Use
5077 value_contents_for_printing/value_embedded_offset, rather than
5078 value_contents. Change `defer_val_int' local type to CORE_ADDR,
5079 and use value_from_pointer to extract a target pointer, rather
5080 than value_from_longest.
5081 (print_variant_part): Add `offset' parameter. Replace
5082 `outer_valaddr' parameter by a new `outer_offset' parameter.
5083 Don't re-adjust `valaddr'. Instead pass down adjusted offsets.
5084 (ada_value_print): Use
5085 value_contents_for_printing/value_embedded_offset, rather than
5087 (print_record): Add `offset' parameter, and adjust to pass it
5089 (print_field_values): Add `offset' parameter. Replace
5090 `outer_valaddr' parameter by a new `outer_offset' parameter.
5091 Don't re-adjust `valaddr'. Instead pass down adjusted offsets.
5092 Use value_contents_for_printing/value_embedded_offset, rather than
5094 * d-valprint.c (dynamic_array_type): Use
5095 value_contents_for_printing/value_embedded_offset, rather than
5097 * jv-valprint.c (java_print_value_fields): Add `offset' parameter.
5098 Don't re-adjust `valaddr'. Instead pass down adjusted offsets.
5099 (java_print_value_fields): Take `offset' into account. Don't
5100 re-adjust `valaddr'. Instead pass down adjusted offsets.
5101 (java_val_print): Take `embedded_offset' into account. Pass it to
5102 java_print_value_fields.
5103 * f-valprint.c (f77_print_array_1): Add `embedded_offset'
5104 parameter. Don't re-adjust `valaddr' or `address'. Instead pass
5105 down adjusted offsets.
5106 (f77_print_array): Add `embedded_offset' parameter. Pass it down.
5107 (f_val_print): Take `embedded_offset' into account.
5109 2011-01-21 Joel Brobecker <brobecker@adacore.com>
5111 * inflow.c: Include "gdbcmd.h".
5112 (interactive_mode): New static global, moved here from top.c.
5113 (show_interactive_mode): New function, moved here from top.c.
5114 use gdb_has_a_terminal instead of input_from_terminal_p to
5115 determine the current mode.
5116 (gdb_has_a_terminal): Add handling of the "iteractive-mode"
5118 (_initialize_inflow): Add the "set/show interactive-mode"
5119 commands. Moved here from top.c, after having adjusted slightly
5121 * top.c (interactive_mode, show_interactive_mode): Delete, moved
5123 (input_from_terminal_p): Remove handling of "interactive-mode"
5124 setting, moved to infow.c.
5125 (init_main): Remove creation of the "set/show interactive-mode"
5126 commands, moved to inflow.c.
5128 2011-01-19 Joel Brobecker <brobecker@adacore.com>
5130 * NEWS: Add entry for native ia64-hpux support.
5132 2011-01-19 Tom Tromey <tromey@redhat.com>
5135 * thread.c (free_thread): Free 'name'.
5136 (print_thread_info): Emit thread name. Change CLI output.
5137 (thread_name_command): New function.
5138 (do_captured_thread_select): Emit newline.
5139 (_initialize_thread): Register 'thread name' command.
5140 * target.h (struct target_ops) <to_thread_name>: New field.
5141 (target_thread_name): New macro.
5142 * target.c (update_current_target): Handle to_thread_name.
5143 * python/py-infthread.c (thpy_get_name): New function.
5144 (thpy_set_name): Likewise.
5145 (thread_object_getset): Add "name".
5146 * linux-nat.c (linux_nat_thread_name): New function.
5147 (linux_nat_add_target): Set to_thread_name.
5148 * gdbthread.h (struct thread_info) <name>: New field.
5150 2011-01-18 Joel Brobecker <brobecker@adacore.com>
5152 * ada-valprint.c (ada_print_scalar): Remove unsigned char downcast.
5153 (ada_val_print_1): Likewise.
5155 2011-01-18 Joel Brobecker <brobecker@adacore.com>
5157 * rs6000-tdep.c (rs6000_skip_prologue): Make sure that the prologue
5158 upper limit address is not greater than the function end address
5159 when the upper limit could not be computed using the debugging
5162 2011-01-17 Tom Tromey <tromey@redhat.com>
5164 * cli/cli-cmds.c (apropos_command): Free the compiled regex. Use
5166 * utils.c: Include gdb_regex.h.
5167 (do_regfree_cleanup): New function.
5168 (make_regfree_cleanup): Likewise.
5169 (get_regcomp_error): Likewise.
5170 * gdb_regex.h (make_regfree_cleanup, get_regcomp_error): Declare.
5172 2011-01-17 Tom Tromey <tromey@redhat.com>
5174 * cli/cli-cmds.c (apropos_command): Fix formatting. Don't call
5177 2011-01-17 Pierre Muller <muller@ics.u-strasbg.fr>
5179 * p-exp.y (intvar): New static variable, used to set CURRENT_TYPE
5180 for internal variables.
5181 (last_was_structop): New static variable.
5182 (COMPLETE): New token.
5183 (field_exp): New rule to group all '.' suffix handling.
5184 Add mark_struct_expression calls when approriate to be able
5185 to correctly find fields for completion.
5186 (yylex): Adapt to handle field completion and set INTVAR when
5189 2011-01-14 Yao Qi <yao@codesourcery.com>
5191 * arm-tdep.c (arm_register_reggroup_p): FPS register is in
5192 save_reggroup, restore_reggroup and all_reggroup.
5194 2011-01-14 Joel Brobecker <brobecker@adacore.com>
5196 * ada-valprint. (ada_printchar): Use the correct type length
5197 in call to ada_emit_char.
5198 * c-valprint.c (c_val_print): Remove cast in call to LA_PRINT_CHAR.
5200 2011-01-14 Pierre Muller <muller@ics.u-strasbg.fr>
5202 * solib-som.h (hpux_major_release): Declare variable here.
5203 * solib-som.c: Remove <sys/utsname.h> header.
5204 (DEFAULT_HPUX_MAJOR_RELEASE): New macro.
5205 (hpux_major_release): Make global, change default value to
5206 DEFAULT_HPUX_MAJOR_RELEASE.
5207 (get_hpux_major_release): Simply return HPUX_MAJOR_RELEASE.
5208 * hppa-hpux-nat.c: Add <sys/utsname.h> include.
5209 Add "solib-som.h" header.
5210 (set_hpux_major_release): New function.
5211 (_initialize_hppa_hpux_nat): Call set_hpux_major_release.
5213 2011-01-14 Mike Frysinger <vapier@gentoo.org>
5215 * configure.tgt (*-*-uclinux*): Match more Linux os targets
5217 2011-01-14 Joel Brobecker <brobecker@adacore.com>
5219 * ia64-hpux-nat.c (ia64_hpux_fetch_register): Remove trailing
5220 new-line at end of warning message.
5221 (ia64_hpux_store_register): Remove trailing new-line at end of
5223 * ia64-hpux-tdep.c: Rephrase comment.
5224 * solib-ia64-hpux.c (struct dld_info): Change type of field
5225 dld_flags from "long long" to ULONGEST.
5227 2011-01-14 Pedro Alves <pedro@codesourcery.com>
5229 * target.h (deprecated_child_ops): Delete declaration.
5230 * target.c (deprecated_child_ops): Delete definition.
5232 2011-01-14 Pedro Alves <pedro@codesourcery.com>
5234 * Makefile.in (hpux-thread.o): Delete rule.
5235 * configure.ac: Don't check for HPUX DCE threads support.
5236 * configure, config.in: Regenerate.
5237 * hppa-hpux-nat.c (child_suppress_run): Delete.
5238 (hppa_hpux_child_can_run): Delete.
5239 (_initialize_hppa_hpux_nat): Don't override to_can_run.
5240 * hpux-thread.c: Delete.
5242 2011-01-13 Joel Brobecker <brobecker@adacore.com>
5244 * hpux-thread.c (hpux_pid_to_str): Delete.
5246 2011-01-13 Joel Brobecker <brobecker@adacore.com>
5248 * ada-valprint.c (ada_emit_char): Remove strange code.
5249 Check that c is <= UCHAR_MAX before passing it to isascii.
5250 (char_at): Do not assume that TYPE_LEN is either 1 or 2.
5252 2011-01-13 Joel Brobecker <brobecker@adacore.com>
5254 * top.c (input_from_terminal_p): Restrict the use of interactive_mode
5255 to the case where instream is stdin.
5257 2011-01-13 Joel Brobecker <brobecker@adacore.com>
5259 * ia64-tdep.h (struct regcache): Forward declare.
5260 (struct ia64_infcall_ops): New struct type.
5261 (struct gdbarch_tdep): New fields "find_global_pointer_from_solib"
5263 * ia64-tdep.c (ia64_find_global_pointer_from_dynamic_section):
5264 Renames ia64_find_global_pointer.
5265 (ia64_find_global_pointer, ia64_allocate_new_rse_frame)
5266 (ia64_store_argument_in_slot, ia64_set_function_addr: New function.
5267 (ia64_push_dummy_call): Adjust to use the new tdep ia64_infocall_ops
5269 (ia64_infcall_ops): New static global constant.
5270 (ia64_gdbarch_init): Set tdep->infcall_ops.
5271 * ia64-hpux-nat.c (ia64_hpux_xfer_solib_got): New function.
5272 (ia64_hpux_xfer_partial): Add TARGET_OBJECT_HPUX_SOLIB_GOT handing.
5273 * ia64-hpux-tdep.c: Include "regcache.h", "gdbcore.h" and "inferior.h".
5274 (ia64_hpux_dummy_code): New static global constant.
5275 (ia64_hpux_push_dummy_code, ia64_hpux_allocate_new_rse_frame)
5276 (ia64_hpux_store_argument_in_slot, ia64_hpux_set_function_addr)
5277 (ia64_hpux_dummy_id, ia64_hpux_find_global_pointer_from_solib):
5279 (ia64_hpux_infcall_ops): New static global constant.
5280 (ia64_hpux_init_abi): Install gdbarch and tdep methods needed
5281 for inferior function calls to work properly on ia64-hpux.
5283 2011-01-13 Joel Brobecker <brobecker@adacore.com>
5285 * target.h (enum target_object): Add TARGET_OBJECT_HPUX_UREGS.
5286 * ia64-tdep.h (struct frame_info): forward declaration.
5287 (struct gdbarch_tdep): Add field size_of_register_frame.
5288 * ia64-tdep.c (ia64_access_reg): Use tdep->size_of_register_frame
5289 to determine the size of the register frame.
5290 (ia64_size_of_register_frame): New function.
5291 (ia64_gdbarch_init): Set tdep->size_of_register_frame.
5292 * ia64-hpux-tdep.c: Include "target.h" and "frame.h".
5293 (IA64_HPUX_UREG_REASON): New macro.
5294 (ia64_hpux_stopped_in_syscall, ia64_hpux_size_of_register_frame):
5296 (ia64_hpux_init_abi): Set tdep->size_of_register_frame.
5297 * ia64-hpux-nat.c (ia64_hpux_xfer_uregs): New function.
5298 (ia64_hpux_xfer_partial): Add handling of TARGET_OBJECT_HPUX_UREGS
5301 2011-01-13 Joel Brobecker <brobecker@adacore.com>
5303 Add support for ia64-hpux.
5304 * config/ia64/hpux.mh, ia64-hpux-nat.c, ia64-hpux-tdep.c,
5305 ia64-hpux-tdep.h, solib-ia64-hpux.c, solib-ia64-hpux.h: New files.
5307 * configure.host: Add handling for ia64-hpux hosts. Add associated
5309 * configure.tgt: Add handling for ia64-hpux targets.
5310 * Makefile.in (ALL_64_TARGET_OBS): Add ia64-hpux-tdep.o.
5311 (HFILES_NO_SRCDIR): Add ia64-hpux-tdep.h.
5312 (ALLDEPFILES): Add ia64-hpux-nat.c ia64-hpux-tdep.c.
5314 2011-01-13 Joel Brobecker <brobecker@adacore.com>
5316 [ttrace] Compute thread list immediately after attach.
5317 * inf_ttrace_attach (inf_ttrace_create_threads_after_attach):
5319 (inf_ttrace_attach): Use it.
5321 2011-01-13 Joel Brobecker <brobecker@adacore.com>
5323 * libunwind-frame.c (libunwind_frame_cache): Do not return NULL
5324 if we could not determine the frame's function address. Instead,
5325 use the frame's PC, and then continue.
5327 2011-01-13 Joel Brobecker <brobecker@adacore.com>
5329 * libunwind-frame.c (__LITTLE_ENDIAN, __BIG_ENDIAN): Define if
5330 not already defined.
5332 2011-01-13 Joel Brobecker <brobecker@adacore.com>
5334 * ia64-tdep.c (ia64_struct_type_p): New function.
5335 (ia64_extract_return_value): Handle integral values that are
5336 less than 8 bytes long.
5337 (ia64_push_dummy_call): Likewise.
5339 2011-01-13 Joel Brobecker <brobecker@adacore.com>
5341 * ia64-tdep.c (floatformat_ia64_ext_little): Renames
5342 floatformat_ia64_ext.
5343 (floatformat_ia64_ext_big): New static const.
5344 (floatformats_ia64_ext): Set first entry to &floatformat_ia64_ext_big.
5346 2011-01-12 Tom Tromey <tromey@redhat.com>
5348 * mi/mi-symbol-cmds.c (mi_cmd_symbol_list_lines): Fix error
5350 * mi/mi-main.c (mi_cmd_thread_select): Fix error messages.
5351 (mi_cmd_thread_list_ids): Likewise.
5352 (mi_cmd_data_list_changed_registers): Likewise.
5353 (mi_cmd_data_list_register_values): Likewise.
5354 (mi_cmd_data_write_register_values): Likewise.
5355 (mi_cmd_data_evaluate_expression): Likewise.
5356 (mi_cmd_data_read_memory): Likewise.
5357 (mi_cmd_data_read_memory_bytes): Likewise.
5358 (mi_cmd_data_write_memory): Likewise.
5359 (mi_cmd_enable_timings): Likewise.
5360 * mi/mi-interp.c (mi_cmd_interpreter_exec): Fix error messages.
5361 * mi/mi-cmd-var.c (mi_cmd_var_create): Fix error messages.
5362 (mi_cmd_var_delete): Likewise.
5363 (mi_cmd_var_set_format): Likewise.
5364 (mi_cmd_var_show_format): Likewise.
5365 (mi_cmd_var_info_num_children): Likewise.
5366 (mi_cmd_var_list_children): Likewise.
5367 (mi_cmd_var_info_type): Likewise.
5368 (mi_cmd_var_info_expression): Likewise.
5369 (mi_cmd_var_show_attributes): Likewise.
5370 (mi_cmd_var_assign): Likewise.
5371 (mi_cmd_var_update): Likewise.
5372 (mi_cmd_enable_pretty_printing): Likewise.
5373 (mi_cmd_var_set_update_range): Likewise.
5374 * mi/mi-cmd-target.c (mi_cmd_target_file_get): Fix error
5376 (mi_cmd_target_file_put): Likewise.
5377 (mi_cmd_target_file_delete): Likewise.
5378 * mi/mi-cmd-stack.c (mi_cmd_stack_list_frames): Fix error
5380 (mi_cmd_stack_info_depth): Likewise.
5381 (mi_cmd_stack_list_locals): Likewise.
5382 (mi_cmd_stack_list_args): Likewise.
5383 (mi_cmd_stack_select_frame): Likewise.
5384 (mi_cmd_stack_select_frame): Likewise.
5385 (mi_cmd_stack_info_frame): Likewise.
5386 * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file): Fix error
5388 (mi_cmd_file_list_exec_source_files): Likewise.
5389 * mi/mi-cmd-env.c (mi_cmd_env_pwd): Fix error messages.
5390 (mi_cmd_env_cd): Likewise.
5391 (mi_cmd_env_path): Likewise.
5392 (mi_cmd_env_dir): Likewise.
5393 (mi_cmd_inferior_tty_show): Likewise.
5394 * mi/mi-cmd-disas.c (mi_cmd_disassemble): Fix error messages.
5395 * mi/mi-cmd-break.c (mi_cmd_break_insert): Fix error messages.
5396 (mi_cmd_break_watch): Likewise.
5398 2011-01-12 Thiago Jung Bauermann <bauerman@br.ibm.com>
5400 * ppc-linux-nat.c (booke_cmp_hw_point): Fix whitespace.
5401 (ppc_linux_insert_hw_breakpoint): Likewise.
5402 (ppc_linux_remove_hw_breakpoint): Likewise.
5403 (ppc_linux_insert_watchpoint): Likewise.
5405 2011-01-12 Andrew Burgess <aburgess@broadcom.com>
5406 Jan Kratochvil <jan.kratochvil@redhat.com>
5408 PR fortran/11104 and DWARF unbound arrays detection.
5409 * dwarf2read.c (read_subrange_type): Set zero length on unspecified
5410 upper bound. Set TYPE_HIGH_BOUND_UNDEFINED if not language_ada on
5411 unspecified upper bound.
5412 * eval.c (evaluate_subexp_standard) <multi_f77_subscript>: Remove
5413 variables array_size_array, tmp_type and offset_item. New variable
5414 array. Remove call to f77_get_upperbound. New variables array_type
5415 and index. Call value_subscripted_rvalue for each dimenasion. Remove
5416 the final call to deprecated_set_value_type.
5418 2011-01-12 Jan Kratochvil <jan.kratochvil@redhat.com>
5420 Make value allocations more lazy.
5421 * ada-lang.c (coerce_unspec_val_to_type): Use allocate_value_lazy
5422 instead of allocate_value and set_value_lazy when possible.
5423 * dwarf2loc.c (dwarf2_evaluate_loc_desc_full): Use allocate_value_lazy
5424 instead of allocate_value and set_value_lazy.
5425 * findvar.c (value_of_register_lazy): Likewise.
5426 (read_var_value): Remove V preallocation, call just check_typedef in
5427 advance. Move allocate_value to LOC_CONST, LOC_LABEL,
5428 LOC_CONST_BYTES. Use allocate_value_lazy in LOC_STATIC, LOC_ARG,
5429 LOC_REF_ARG, LOC_LOCAL, LOC_BLOCK. Set ADDR instead of
5430 set_value_address and break in LOC_BLOCK. Use allocate_value_lazy and
5431 remove lval_memory set in LOC_REGPARM_ADDR. Use allocate_value_lazy
5432 in LOC_UNRESOLVED and LOC_OPTIMIZED_OUT. Add setting lval_memory at
5433 the end, remove set_value_lazy there.
5434 * valarith.c (value_subscripted_rvalue): Use allocate_value_lazy
5435 instead of allocate_value and set_value_lazy when possible.
5436 * valops.c (value_fetch_lazy): Do nop for value_optimized_out VAL.
5437 * value.c (allocate_computed_value): Use allocate_value_lazy instead
5438 of allocate_value and set_value_lazy.
5439 (value_from_contents_and_address): Use allocate_value_lazy instead of
5440 allocate_value and set_value_lazy when possible.
5442 2011-01-12 Andrew Burgess <aburgess@broadcom.com>
5444 * disasm.c (dump_insns): Support dumping opcodes for MI.
5445 * mi/mi-cmd-disas.c (mi_cmd_disassemble): Allow mode to control
5446 dumping of instruction opcodes.
5448 2011-01-09 Robert Millan <rmh@gnu.org> (tiny patch)
5450 * configure.tgt: Detect GNU/kFreeBSD and set `gdb_osabi'
5453 2011-01-11 Tom Tromey <tromey@redhat.com>
5455 * thread.c (do_captured_thread_select): Emit newline before
5458 2011-01-11 Michael Snyder <msnyder@vmware.com>
5460 * s390-tdep.c: Comment cleanup, mostly periods and spaces.
5461 * score-tdep.c: Ditto.
5462 * score-tdep.h: Ditto.
5463 * ser-base.c: Ditto.
5464 * ser-go32.c: Ditto.
5467 * ser-mingw.c: Ditto.
5468 * ser-pipe.c: Ditto.
5470 * ser-unix.c: Ditto.
5471 * sh64-tdep.c: Ditto.
5472 * shnbsd-nat.c: Ditto.
5476 * solib-darwin.c: Ditto.
5477 * solib-frv.c: Ditto.
5479 * solib-irix.c: Ditto.
5480 * solib-osf.c: Ditto.
5481 * solib-pa64.c: Ditto.
5482 * solib-som.c: Ditto.
5483 * solib-spu.c: Ditto.
5484 * solib-sunos.c: Ditto.
5485 * solib-svr4.c: Ditto.
5487 * sol-thread.c: Ditto.
5491 * sparc64-linux-tdep.c: Ditto.
5492 * sparc64-tdep.c: Ditto.
5493 * sparc-linux-nat.c: Ditto.
5494 * sparc-linux-tdep.c: Ditto.
5495 * sparc-sol2-nat.c: Ditto.
5496 * sparc-sol2-tdep.c: Ditto.
5497 * sparc-tdep.c: Ditto.
5498 * sparc-tdep.h: Ditto.
5499 * spu-tdep.c: Ditto.
5500 * stabsread.c: Ditto.
5501 * stabsread.h: Ditto.
5509 * target-descriptions.c: Ditto.
5510 * target-descriptions.h: Ditto.
5512 * target-memory.c: Ditto.
5513 * terminal.h: Ditto.
5516 * tracepoint.c: Ditto.
5517 * tracepoint.h: Ditto.
5518 * trad-frame.h: Ditto.
5519 * typeprint.c: Ditto.
5521 2011-01-11 Michael Snyder <msnyder@vmware.com>
5523 * ui-file.c: Comment cleanup, mostly periods and spaces.
5528 * v850-tdep.c: Ditto.
5529 * valarith.c: Ditto.
5531 * valprint.c: Ditto.
5532 * valprint.h: Ditto.
5537 * vax-tdep.c: Ditto.
5541 * windows-nat.c: Ditto.
5542 * windows-tdep.c: Ditto.
5543 * xcoffread.c: Ditto.
5544 * xcoffsolib.c: Ditto.
5545 * xml-support.c: Ditto.
5546 * xstormy16-tdep.c: Ditto.
5547 * xtensa-tdep.c: Ditto.
5548 * xtensa-tdep.h: Ditto.
5550 2011-01-11 Thiago Jung Bauermann <bauerman@br.ibm.com>
5552 * breakpoint.c (resources_needed_watchpoint): Fix indentation.
5553 * gdbtypes.c (is_scalar_type_recursive): Fix formatting.
5555 2011-01-11 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
5556 Thiago Jung Bauermann <bauerman@br.ibm.com>
5558 Implement support for PowerPC BookE ranged watchpoints.
5560 (struct breakpoint_ops) <resources_needed>: New method.
5561 Initialize to NULL in all existing breakpoint_ops instances.
5562 (struct breakpoint) <exact>: New field.
5563 (target_exact_watchpoints): Declare external global.
5564 * breakpoint.c (target_exact_watchpoints): New global flag.
5565 (update_watchpoint): Set b->type to bp_hardware_watchpoint and
5566 b->enable_state to bp_enabled before calling
5567 hw_watchpoint_used_count.
5568 (hw_watchpoint_used_count): Iterate over all bp_locations in a
5569 watchpoint. Call breakpoint's breakpoint_ops.resources_needed
5571 (insert_watchpoint, remove_watchpoint): Use fixed length of 1 byte
5572 if the watchpoint is exact.
5573 (resources_needed_watchpoint): New function.
5574 (watchpoint_breakpoint_ops): Add resources_needed_watchpoint.
5575 (watch_command_1): Set b->exact if the user asked for an exact
5576 watchpoint and one can be set.
5577 (can_use_hardware_watchpoint): Add exact_watchpoints argument.
5578 Pass fixed length of 1 to target_region_ok_for_hw_watchpoint if
5579 the user asks for an exact watchpoint and one can be set. Return
5580 number of needed debug registers to watch the expression.
5581 * gdbtypes.c (is_scalar_type): New function, based on
5582 valprint.c:scalar_type_p.
5583 (is_scalar_type_recursive): New function.
5584 * gdbtypes.h (is_scalar_type_recursive): Declare.
5585 * ppc-linux-nat.c (ppc_linux_region_ok_for_hw_watchpoint): Always
5586 handle regions when ranged watchpoints are available.
5587 (create_watchpoint_request): New function.
5588 (ppc_linux_insert_watchpoint, ppc_linux_remove_watchpoint): Use
5589 create_watchpoint_request.
5590 * rs6000-tdep.c (show_powerpc_exact_watchpoints): New function.
5591 (_initialize_rs6000_tdep): Add `exact-watchpoints' boolean to the
5592 `set powerpc' and `show powerpc' commands.
5593 * target.h (struct target_ops) <to_region_ok_for_hw_watchpoint>:
5594 Mention documentation comment in the target macro.
5595 (target_region_ok_for_hw_watchpoint): Document return value.
5597 2011-01-11 Thiago Jung Bauermann <bauerman@br.ibm.com>
5599 * breakpoint.c (update_watchpoint): Decide on using a software or
5600 hardware watchpoint after the bp_locations are created.
5602 2010-01-11 Thiago Jung Bauermann <bauerman@br.ibm.com>
5604 Convert hardware watchpoints to use breakpoint_ops.
5605 * breakpoint.h (breakpoint_ops) <insert>: Rename to...
5606 <insert_location>: ... this. Return int instead of void.
5607 Accept pointer to struct bp_location instead of pointer to
5608 struct breakpoint. Adapt all implementations.
5609 (breakpoint_ops) <remove>: Rename to...
5610 <remove_location>: ... this. Accept pointer to struct bp_location
5611 instead of pointer to struct breakpoint. Adapt all implementations.
5612 * breakpoint.c (insert_catchpoint): Delete function.
5613 (insert_bp_location): Call the watchpoint or catchpoint's
5614 breakpoint_ops.insert method.
5615 (remove_breakpoint_1): Call the watchpoint or catchpoint's
5616 breakpoint_ops.remove method.
5617 (insert_watchpoint, remove_watchpoint): New functions.
5618 (watchpoint_breakpoint_ops): New structure.
5619 (watch_command_1): Initialize the OPS field.
5620 * inf-child.c (inf_child_insert_fork_catchpoint)
5621 (inf_child_remove_fork_catchpoint, inf_child_insert_vfork_catchpoint)
5622 (inf_child_remove_vfork_catchpoint, inf_child_insert_exec_catchpoint)
5623 (inf_child_remove_exec_catchpoint, inf_child_set_syscall_catchpoint):
5625 (inf_child_target): Remove initialization of to_insert_fork_catchpoint,
5626 to_remove_fork_catchpoint, to_insert_vfork_catchpoint,
5627 to_remove_vfork_catchpoint, to_insert_exec_catchpoint,
5628 to_remove_exec_catchpoint and to_set_syscall_catchpoint.
5629 * target.c (update_current_target): Change default implementation of
5630 to_insert_fork_catchpoint, to_remove_fork_catchpoint,
5631 to_insert_vfork_catchpoint, to_remove_vfork_catchpoint,
5632 to_insert_exec_catchpoint, to_remove_exec_catchpoint and
5633 to_set_syscall_catchpoint to return_one.
5634 (debug_to_insert_fork_catchpoint, debug_to_insert_vfork_catchpoint)
5635 (debug_to_insert_exec_catchpoint): Report return value.
5636 * target.h (to_insert_fork_catchpoint, to_insert_vfork_catchpoint)
5637 (to_insert_exec_catchpoint): Change declaration to return int instead
5640 2011-01-11 Michael Snyder <msnyder@vmware.com>
5642 * arm-tdep.c: Internationalization.
5645 * fork-child.c: Ditto.
5646 * nto-procfs.c: Ditto.
5647 * ppc-sysv-tdep.c: Ditto.
5649 * remote-mips.c: Ditto.
5651 * rs6000-nat.c: Ditto.
5652 * rs6000-tdep.c: Ditto.
5656 * xml-support.c: Ditto.
5657 * mi/mi-cmd-break.c: Ditto.
5658 * mi/mi-cmd-var.c: Ditto.
5659 * mi/mi-interp.c: Ditto.
5660 * mi/mi-main.c: Ditto.
5662 2011-01-11 Andrew Burgess <aburgess@broadcom.com>
5664 * remote-sim.c (gdbsim_store_register): Update API to
5665 sim_store_register to check more error conditions.
5667 2011-01-10 Michael Snyder <msnyder@vmware.com>
5669 * nto-procfs.c: Comment cleanup, mostly periods and spaces.
5670 * nto-tdep.c: Ditto.
5671 * nto-tdep.h: Ditto.
5672 * objc-exp.y: Ditto.
5673 * objc-lang.c: Ditto.
5674 * objfiles.c: Ditto.
5675 * objfiles.h: Ditto.
5676 * observer.c: Ditto.
5677 * opencl-lang.c: Ditto.
5680 * parser-defs.h: Ditto.
5683 * posix-hdep.c: Ditto.
5684 * ppcbug-rom.c: Ditto.
5685 * ppc-linux-nat.c: Ditto.
5686 * ppc-linux-tdep.c: Ditto.
5687 * ppc-linux-tdep.h: Ditto.
5688 * ppcnbsd-tdep.c: Ditto.
5689 * ppcobsd-tdep.c: Ditto.
5690 * ppcobsd-tdep.h: Ditto.
5691 * ppc-sysv-tdep.c: Ditto.
5692 * ppc-tdep.h: Ditto.
5693 * printcmd.c: Ditto.
5694 * proc-abi.c: Ditto.
5695 * proc-flags.c: Ditto.
5697 * proc-utils.h: Ditto.
5698 * progspace.h: Ditto.
5699 * prologue-value.c: Ditto.
5700 * prologue-value.h: Ditto.
5701 * psympriv.h: Ditto.
5703 * p-typeprint.c: Ditto.
5704 * p-valprint.c: Ditto.
5705 * ravenscar-sparc-thread.c: Ditto.
5706 * ravenscar-thread.c: Ditto.
5707 * ravenscar-thread.h: Ditto.
5709 * regcache.c: Ditto.
5710 * regcache.h: Ditto.
5712 * remote-fileio.c: Ditto.
5713 * remote-fileio.h: Ditto.
5715 * remote-m32r-sdi.c: Ditto.
5716 * remote-mips.c: Ditto.
5717 * remote-sim.c: Ditto.
5718 * rs6000-aix-tdep.c: Ditto.
5719 * rs6000-nat.c: Ditto.
5720 * rs6000-tdep.c: Ditto.
5722 2011-01-10 Michael Snyder <msnyder@vmware.com>
5724 * charset.c (validate): Internationalization.
5725 * coffread.c (read_one_sym): Ditto.
5726 * dwarf2read.c (dwarf2_attach_fields_to_type): Ditto.
5727 * h8300-tdep.c (H8300_extract_return_value): Ditto.
5728 * inflow.c (new_tty): Ditto.
5729 * iq2000-tdep.c (iq2000_breakpoint_from_pc): Ditto.
5730 * m32c-tdep.c (m32c_return_value): Ditto.
5731 * mep-tdep.c (mep_store_return_value): Ditto.
5732 * score-tdep.c (score7_fetch_insn): Ditto.
5733 * ser-mingw.c (pipe_windows_open): Ditto.
5734 * sh64-tdep.c (sh64_extract_return_value): Ditto.
5735 * spu-tdep.c (spu_register_type): Ditto.
5736 * tracepoint.c (trace_find_command): Ditto.
5737 * valarith.c (value_pos): Ditto.
5739 2011-01-10 Joel Brobecker <brobecker@adacore.com>
5741 * ada-valprint.c (printstr): Minor comment reformatting.
5743 2011-01-08 Michael Snyder <msnyder@vmware.com>
5745 * m32r-rom.c (m32r_upload_command): Fix up ARI warnings for _
5748 2011-01-08 Michael Snyder <msnyder@vmware.com>
5750 * h8300-tdep.c: Comment cleanup, mostly periods and spaces.
5751 * hppa-hpux-tdep.c: Ditto.
5752 * hppa-linux-nat.c: Ditto.
5753 * hppa-linux-tdep.c: Ditto.
5754 * hppanbsd-tdep.c: Ditto.
5755 * hppa-tdep.c: Ditto.
5756 * hppa-tdep.h: Ditto.
5757 * hpux-thread.c: Ditto.
5758 * i386-cygwin-tdep.c: Ditto.
5759 * i386-darwin-nat.c: Ditto.
5760 * i386gnu-nat.c: Ditto.
5761 * i386-linux-nat.c: Ditto.
5762 * i386-linux-tdep.c: Ditto.
5763 * i386-nat.c: Ditto.
5764 * i386-nat.h: Ditto.
5765 * i386nbsd-tdep.c: Ditto.
5766 * i386-sol2-nat.c: Ditto.
5767 * i386-stub.c: Ditto.
5768 * i386-tdep.c: Ditto.
5769 * i386-tdep.h: Ditto.
5770 * i387-tdep.c: Ditto.
5771 * ia64-linux-nat.c: Ditto.
5772 * ia64-linux-tdep.c: Ditto.
5773 * ia64-tdep.c: Ditto.
5777 * inferior.c: Ditto.
5778 * inferior.h: Ditto.
5784 * iq2000-tdep.c: Ditto.
5785 * irix5-nat.c: Ditto.
5791 * jv-typeprint.c: Ditto.
5792 * jv-valprint.c: Ditto.
5793 * language.c: Ditto.
5794 * language.h: Ditto.
5795 * linespec.c: Ditto.
5796 * linux-fork.c: Ditto.
5797 * linux-nat.c: Ditto.
5798 * linux-thread-db.c: Ditto.
5799 * lm32-tdep.c: Ditto.
5801 2011-01-08 Michael Snyder <msnyder@vmware.com>
5803 * m2-exp.y: Comment cleanup, mostly periods and spaces.
5805 * m2-typeprint.c: Ditto.
5806 * m2-valprint.c: Ditto.
5807 * m32c-tdep.c: Ditto.
5808 * m32r-linux-nat.c: Ditto.
5809 * m32r-rom.c: Ditto.
5810 * m32r-tdep.c: Ditto.
5811 * m32r-tdep.h: Ditto.
5812 * m68hc11-tdep.c: Ditto.
5813 * m58klinux-nat.c: Ditto.
5814 * m68k-tdep.c: Ditto.
5815 * m88k-tdep.c: Ditto.
5816 * m88k-tdep.h: Ditto.
5817 * machoread.c: Ditto.
5818 * macrocmd.c: Ditto.
5819 * macroexp.c: Ditto.
5820 * macrotab.c: Ditto.
5823 * mdebugread.c: Ditto.
5824 * mdebugread.h: Ditto.
5827 * memory-map.h: Ditto.
5828 * mep-tdep.c: Ditto.
5829 * microblaze-rom.c: Ditto.
5830 * microblaze-tdep.c: Ditto.
5832 * mips-irix-tdep.c: Ditto.
5833 * mips-linux-nat.c: Ditto.
5834 * mips-linux-tdep.c: Ditto.
5835 * mips-linux-tdep.h: Ditto.
5836 * mipsnbsd-nat.c: Ditto.
5837 * mipsnbsd-tdep.c: Ditto.
5838 * mipsread.c: Ditto.
5839 * mips-tdep.c: Ditto.
5840 * mips-tdep.h: Ditto.
5841 * mn10300-linux-tdep.c: Ditto.
5842 * mn10300-tdep.c: Ditto.
5843 * mn10300-tdep.h: Ditto.
5846 * moxie-tdep.c: Ditto.
5847 * moxie-tdep.h: Ditto.
5850 2011-01-08 Mike Frysinger <vapier@gentoo.org>
5852 * bfin-tdep.h (BFIN_A0_DOT_W_REGNUM): Fix typo in name.
5854 2011-01-08 Robert Millan <rmh@gnu.org>
5856 * fbsd-nat.c (fbsd_find_memory_regions): Fix typo.
5858 2011-01-07 Michael Snyder <msnyder@vmware.com>
5860 * charset.c (_initialize_charset): Fix typo in string.
5862 2011-01-07 Michael Snyder <msnyder@vmware.com>
5864 * mi/mi-cmd-disas.c (mi_cmd_disassemble): Mark up error message
5866 * tui/tui-layout.c (tui_set_layout_for_display_command):
5867 Split line so that operator goes to beginning of line.
5868 * tui/tui-winsource.c (tui_horizontal_source_scroll): Move
5869 assignment out of if statement.
5871 2011-01-07 Michael Snyder <msnyder@vmware.com>
5873 * ada-lang.c: Comment cleanup, mostly periods and spaces.
5874 * ada-lang.h: Ditto.
5875 * ada-tasks.c: Ditto.
5876 * ada-valprint.c: Ditto.
5877 * aix-threads.c: Ditto.
5878 * alpha-linux-nat.c: Ditto.
5879 * alpha-linux-tdep.c: Ditto.
5880 * alpha-mdebug-tdep.c: Ditto.
5881 * alpha-nat.c: Ditto.
5882 * alpha-osf1-tdep.c: Ditto.
5883 * alpha-tdep.c: Ditto.
5884 * alphabsd-nat.c: Ditto.
5885 * alphabsd-tdep.c: Ditto.
5886 * amd64-darwin-tdep.c: Ditto.
5887 * amd64-linux-nat.c: Ditto.
5888 * amd64-linux-tdep.c: Ditto.
5889 * amd64-sol2-tdep.c: Ditto.
5890 * amd64-tdep.c: Ditto.
5891 * amd64-fbsd-tdep.c: Ditto.
5892 * amd64-nbsd-tdep.c: Ditto.
5893 * amd64-obsd-tdep.c: Ditto.
5894 * amd64-linux-nat.c: Ditto.
5895 * amd64-linux-tdep.c: Ditto.
5896 * arm-tdep.c: Ditto.
5897 * arm-tdep.h: Ditto.
5898 * armnbsd-nat.c: Ditto.
5899 * avr-tdep.c: Ditto.
5900 * bfin-tdep.c: Ditto.
5902 * c-typeprintc: Ditto.
5903 * c-valprint.c: Ditto.
5904 * coff-pe-read.h: Ditto.
5905 * coffreead.c: Ditto.
5906 * cris-tdep.c: Ditto.
5908 * darwin-nat-info.c: Ditto.
5909 * darwin-nat.c: Ditto.
5910 * dbug-rom.c: Ditto.
5914 * dec-thread.c: Ditto.
5916 * demangle.c: Ditto.
5917 * dicos-tdep.c: Ditto.
5918 * dictionary.c: Ditto.
5919 * dictionary.h: Ditto.
5920 * dink32-rom.c: Ditto.
5922 * doublest.c: Ditto.
5924 * dummy-frame.c: Ditto.
5925 * dwarf2-frame.c: Ditto.
5926 * dwarf2expr.c: Ditto.
5927 * dwarf2loc.c: Ditto.
5928 * dwarf2read.c: Ditto.
5932 * event-top.h: Ditto.
5933 * exceptions.c: Ditto.
5934 * exceptions.h: Ditto.
5936 * expprint.c: Ditto.
5937 * expression.h: Ditto.
5941 * f-typeprint.c: Ditto.
5942 * f-valprint.c: Ditto.
5943 * fbsd-nat.c: Ditto.
5945 * fork-child.c: Ditto.
5948 * frv-linux-tdep.c: Ditto.
5949 * frv-tdep.c: Ditto.
5951 * gdb-stabs.h: Ditto.
5952 * gdb_assert.h: Ditto.
5953 * gdb_string.h: Ditto.
5954 * gdb_thread_db.h: Ditto.
5955 * gdb_wait.h: Ditto.
5956 * gdbarch.sh: Ditto.
5958 * gdbthread.h: Ditto.
5959 * gdbtypes.c: Ditto.
5960 * gdbtypes.h: Ditto.
5963 * gnu-v2-abi.c: Ditto.
5964 * gnu-v3-abi.c: Ditto.
5965 * go32-nat.c: Ditto.
5966 * gdbarch.c: Regenerate.
5967 * gdbarch.h: Regenerate.
5969 2011-01-07 Michael Snyder <msnyder@vmware.com>
5971 * ax-gdb.c: Adjust some long output strings.
5972 * breakpoint.c: Ditto.
5977 * linux-nat.c: Ditto.
5978 * solib-pa64.c: Ditto.
5979 * solib-som.c: Ditto.
5981 2011-01-06 Tom Tromey <tromey@redhat.com>
5985 * python/python.c (GdbMethods): Add "newest_frame" method.
5986 * python/python-internal.h (gdbpy_newest_frame): Declare.
5987 * python/py-frame.c (gdbpy_newest_frame): New function.
5989 2010-01-06 Paul Pluzhnikov <ppluzhnikov@google.com>
5991 * jit.h (struct jit_code_entry): use ULONGEST for symfile_size.
5992 * jit.c (jit_debug): New variable.
5993 (show_jit_debug): New function.
5994 (struct target_buffer): Use ULONGEST.
5995 (bfd_open_from_target_memory): Likewise.
5996 (jit_register_code, jit_inferior_init): Add debug output.
5997 (_initialize_jit): Register "debug jit" command.
5999 2011-01-06 Tom Tromey <tromey@redhat.com>
6001 * frame.h (enum frame_type) <INLINE_FRAME>: Fix comment.
6002 * python/py-frame.c (gdbpy_initialize_frames): Add INLINE_FRAME
6005 2011-01-06 Tom Tromey <tromey@redhat.com>
6007 * python/py-frame.c (frapy_block): Use get_frame_block.
6009 2011-01-06 Joel Brobecker <brobecker@adacore.com>
6011 Do not stop on SIGPRIO signals by default
6012 * infrun.c (_initialize_infrun): Unset signal_stop and
6013 signal_print for TARGET_SIGNAL_PRIO.
6015 2011-01-06 Joel Brobecker <brobecker@adacore.com>
6017 * ada-tasks.c: Fix style violation in comment.
6019 2011-01-06 Joel Brobecker <brobecker@adacore.com>
6021 * linespec.c (decode_compound, find_method): Remove trailing \n
6022 at end of error string.
6023 * solib-irix.c (irix_current_sos): Likewise.
6024 * varobj.c (uninstall_variable): Likewise.
6026 2011-01-06 Joel Brobecker <brobecker@adacore.com>
6028 * copyright.py: New script.
6029 * copyright.sh (byhand): Add *.ads, *.adb, *.gpr and *.inc.
6030 Launch emacs without exec'ing. Call copyright.py afterwards.
6032 2011-01-05 Michael Snyder <msnyder@vmware.com>
6034 * addrmap.c: Shorten lines of >= 80 columns.
6035 * arch-utils.c: Ditto.
6036 * arch-utils.h: Ditto.
6038 * ax-general.c: Ditto.
6040 * blockframe.c: Ditto.
6041 * breakpoint.c: Ditto.
6042 * buildsym.c: Ditto.
6044 * c-typeprint.c: Ditto.
6046 * coffread.c: Ditto.
6050 * cp-namespace.c: Ditto.
6051 * cp-support.c: Ditto.
6052 * dbug-rom.c: Ditto.
6057 * dictionary.c: Ditto.
6059 * doublest.c: Ditto.
6060 * dwarf2-frame.c: Ditto.
6061 * dwarf2expr.c: Ditto.
6062 * dwarf2loc.c: Ditto.
6063 * dwarf2read.c: Ditto.
6066 * event-loop.c: Ditto.
6067 * event-loop.h: Ditto.
6068 * exceptions.h: Ditto.
6070 * expprint.c: Ditto.
6071 * expression.h: Ditto.
6073 * f-valprint.c: Ditto.
6075 * frame-base.c: Ditto.
6076 * frame-unwind.c: Ditto.
6077 * frame-unwind.h: Ditto.
6081 * gdb-stabs.h: Ditto.
6082 * gdb_assert.h: Ditto.
6083 * gdb_dirent.h: Ditto.
6084 * gdb_obstack.h: Ditto.
6086 * gdbtypes.c: Ditto.
6087 * gdbtypes.h: Ditto.
6088 * inf-ttrace.c: Ditto.
6093 * inline-frame.h: Ditto.
6094 * language.c: Ditto.
6095 * language.h: Ditto.
6096 * libunwind-frame.c: Ditto.
6097 * libunwind-frame.h: Ditto.
6098 * linespec.c: Ditto.
6099 * linux-nat.c: Ditto.
6100 * linux-nat.h: Ditto.
6101 * linux-thread-db.c: Ditto.
6102 * machoread.c: Ditto.
6103 * macroexp.c: Ditto.
6104 * macrotab.c: Ditto.
6107 * mdebugread.c: Ditto.
6112 * objfiles.c: Ditto.
6113 * objfiles.h: Ditto.
6115 * p-typeprint.c: Ditto.
6116 * p-valprint.c: Ditto.
6118 * printcmd.c: Ditto.
6119 * proc-events.c: Ditto.
6121 * progspace.c: Ditto.
6122 * progspace.h: Ditto.
6123 * psympriv.h: Ditto.
6126 * regcache.c: Ditto.
6127 * regcache.h: Ditto.
6128 * remote-fileio.c: Ditto.
6130 * ser-mingw.c: Ditto.
6132 * ser-unix.c: Ditto.
6135 * solib-frv.c: Ditto.
6136 * solib-irix.c: Ditto.
6137 * solib-osf.c: Ditto.
6138 * solib-pa64.c: Ditto.
6139 * solib-som.c: Ditto.
6140 * solib-sunos.c: Ditto.
6141 * solib-svr4.c: Ditto.
6142 * solib-target.c: Ditto.
6146 * stabsread.c: Ditto.
6147 * stabsread.c: Ditto.
6150 * symfile-mem.c: Ditto.
6156 * target-descriptions.c: Ditto.
6157 * target-memory.c: Ditto.
6160 * terminal.h: Ditto.
6163 * tracepoint.c: Ditto.
6164 * tracepoint.h: Ditto.
6168 * user-regs.c: Ditto.
6169 * user-regs.h: Ditto.
6171 * valarith.c: Ditto.
6173 * valprint.c: Ditto.
6174 * valprint.h: Ditto.
6179 * xcoffread.c: Ditto.
6180 * xcoffsolib.c: Ditto.
6181 * xcoffsolib.h: Ditto.
6182 * xml-syscall.c: Ditto.
6183 * xml-tdesc.c: Ditto.
6185 2011-01-05 Michael Snyder <msnyder@vmware.com>
6187 * cli/cli-cmds.c: Shorten lines of >= 80 columns.
6188 * cli/cli-decode.c: Ditto.
6189 * cli/cli-dump.c: Ditto.
6190 * cli/cli-logging.c: Ditto.
6191 * cli/cli-script.c: Ditto.
6192 * cli/cli-setshow.c: Ditto.
6193 * common/signals.c: Ditto.
6194 * mi/mi-cmd-break.c: Ditto.
6195 * mi/mi-cmd-disas.c: Ditto.
6196 * mi/mi-cmd-stack.c: Ditto.
6197 * mi/mi-cmd-var.c: Ditto.
6198 * mi/mi-cmds.c: Ditto.
6199 * mi/mi-common.h: Ditto.
6200 * mi/mi-console.c: Ditto.
6201 * mi/mi-interp.c: Ditto.
6202 * mi/mi-main.c: Ditto.
6203 * osf-share/cma_attr.c: Ditto.
6204 * osf-share/cma_deb_core.h: Ditto.
6205 * osf-share/cma_debug_client.h: Ditto.
6206 * osf-share/cma_handle.h: Ditto.
6207 * osf-share/cma_mutex.h: Ditto.
6208 * osf-share/cma_stack_int.h: Ditto.
6209 * osf-share/cma_tcb_defs.h: Ditto.
6210 * python/py-auto-load.c: Ditto.
6211 * python/py-breakpoint.c: Ditto.
6212 * python/py-cmd.c: Ditto.
6213 * python/py-frame.c: Ditto.
6214 * python/py-objfile.c: Ditto.
6215 * python/py-param.c: Ditto.
6216 * python/py-progspace.c: Ditto.
6217 * python/py-symbol.c: Ditto.
6218 * python/py-value.c: Ditto.
6219 * python/python-internal.h: Ditto.
6220 * python/python.c: Ditto.
6221 * tui/tui-data.c: Ditto.
6222 * tui/tui-disasm.c: Ditto.
6223 * tui/tui-hooks.c: Ditto.
6224 * tui/tui-io.c: Ditto.
6225 * tui/tui-layout.c: Ditto.
6226 * tui/tui-regs.c: Ditto.
6227 * tui/tui-source.c: Ditto.
6228 * tui/tui-stack.c: Ditto.
6229 * tui/tui-win.c: Ditto.
6230 * tui/tui-windata.c: Ditto.
6231 * tui/tui-winsource.c: Ditto.
6233 2011-01-05 Joel Brobecker <brobecker@adacore.com>
6235 * configure.ac, gdb.1: Copyright year update.
6237 2011-01-03 Jan Kratochvil <jan.kratochvil@redhat.com>
6239 * frame.c (get_prev_frame_1) <UNWIND_INNER_ID>: New variables
6240 this_pc_in_block, morestack_msym and morestack_name. Check for
6241 "__morestack" minimal symbol there.
6243 2011-01-03 Joel Brobecker <brobecker@adacore.com>
6245 * symfile.c (find_sym_fns): Add call to dont_repeat.
6247 2011-01-01 Joel Brobecker <brobecker@adacore.com>
6249 Copyright year update in most files (performed by copyright.sh).
6251 2011-01-01 Joel Brobecker <brobecker@adacore.com>
6253 * top.c (print_gdb_version): Update copyright year in version output.
6255 For older changes see ChangeLog-2010.
6261 version-control: never