1 2015-03-24 Joel Brobecker <brobecker@adacore.com>
3 * gdbtypes.h (enum dynamic_prop_node_kind) <DYN_PROP_DATA_LOCATION>:
4 Renames DYN_ATTR_DATA_LOCATION.
5 (TYPE_DATA_LOCATION): Use DYN_PROP_DATA_LOCATION instead of
6 DYN_ATTR_DATA_LOCATION.
7 * dwarf2read.c (set_die_type): Use DYN_PROP_DATA_LOCATION
8 instead of DYN_ATTR_DATA_LOCATION.
10 2015-03-24 Pedro Alves <palves@redhat.com>
12 * breakpoint.c (until_break_command): Adjust call to proceed.
13 * gdbthread.h (struct thread_control_state) <stepping_command>:
15 * infcall.c (run_inferior_call): Adjust call to proceed.
16 * infcmd.c (run_command_1, proceed_thread_callback, continue_1):
17 Adjust calls to proceed.
18 (set_step_frame): Set the current thread's step_start_function
20 (step_once): Adjust calls to proceed.
21 (jump_command, signal_command, until_next_command)
22 (finish_backward, finish_forward, proceed_after_attach_callback)
23 (attach_command_post_wait): Adjust calls to proceed.
24 * infrun.c (proceed_after_vfork_done): Adjust call to proceed.
25 (do_target_resume): New function, factored out from ...
26 (resume): ... here. Remove 'step' parameter. Instead, check
27 currently_stepping to determine whether the thread should be
29 (proceed): Remove 'step' parameter and don't set the thread's
30 step_start_function here. Adjust call to 'resume'.
31 (handle_inferior_event): Adjust calls to 'resume'.
32 (switch_back_to_stepped_thread): Use do_target_resume instead of
34 (keep_going): Adjust calls to 'resume'.
35 * infrun.h (proceed): Remove 'step' parameter.
37 * windows-nat.c (do_initial_windows_stuff): Adjust call to
39 * mi/mi-main.c (proceed_thread): Adjust call to 'proceed'.
41 2015-03-24 Pedro Alves <palves@redhat.com>
43 * gdbthread.h (struct thread_control_state) <stepping_command>:
45 * infcmd.c (step_once): Pass step=1 to clear_proceed_status. Set
46 the thread's stepping_command field.
47 * infrun.c (resume): Check the thread's stepping_command flag to
48 determine which threads should be resumed. Rename 'entry_step'
50 (clear_proceed_status_thread): Clear 'stepping_command'.
51 (schedlock_applies): Change parameter type to struct thread_info
53 (find_thread_needs_step_over): Remove 'step' parameter. Adjust.
54 (switch_back_to_stepped_thread): Adjust calls to
56 (_initialize_infrun): Adjust "set scheduler-locking step" help.
58 2015-03-24 Pedro Alves <palves@redhat.com>
60 * infrun.c (step_start_function): Delete and ...
61 * gdbthread.h (struct thread_control_state) <step_start_function>:
63 * infrun.c (clear_proceed_status_thread): Clear the thread's
65 (proceed, process_event_stop_test, print_stop_event): Adjust.
67 2015-03-24 Pedro Alves <palves@redhat.com>
69 * infrun.c (proceed): No longer handle negative step.
71 2015-03-24 Gary Benson <gbenson@redhat.com>
73 * nat/x86-linux.h (x86_linux_new_thread): New declaration.
74 (x86_linux_prepare_to_resume): Likewise.
75 * x86-linux-nat.c (x86_linux_new_thread):
76 Moved to nat/x86-linux.c.
77 (x86_linux_prepare_to_resume): Likewise.
78 * nat/x86-linux.c (x86_linux_new_thread): New function.
79 (x86_linux_prepare_to_resume): Likewise.
81 2015-03-24 Gary Benson <gbenson@redhat.com>
83 * nat/x86-linux-dregs.h: New file.
84 * nat/x86-linux-dregs.c: Likewise.
85 * Makefile.in (HFILES_NO_SRCDIR): Add nat/x86-linux-dregs.h.
86 (x86-linux-dregs.o): New rule.
87 * config/i386/linux.mh (NATDEPFILES): Add x86-linux-dregs.o.
88 * config/i386/linux64.mh (NATDEPFILES): Likewise.
89 * x86-linux-nat.c: Include nat/x86-linux-dregs.h.
90 (u_debugreg_offset): Moved to nat/x86-linux-dregs.c.
91 (x86_linux_dr_get): Likewise.
92 (x86_linux_dr_set): Likewise.
93 (x86_linux_dr_get_addr): Likewise.
94 (x86_linux_dr_get_control): Likewise.
95 (x86_linux_dr_get_status): Likewise.
96 (update_debug_registers_callback): Likewise.
97 (x86_linux_dr_set_control): Likewise.
98 (x86_linux_dr_set_addr): Likewise.
99 (x86_linux_update_debug_registers): Likewise.
101 2015-03-24 Gary Benson <gbenson@redhat.com>
103 * x86-linux-nat.c (x86_linux_update_debug_registers):
104 New function, factored out from...
105 (x86_linux_prepare_to_resume): ...this.
107 2015-03-24 Gary Benson <gbenson@redhat.com>
109 * x86-linux-nat.c (x86_linux_dr_get): Update comments.
110 (x86_linux_dr_set): Likewise.
111 (x86_linux_dr_get_addr): Likewise.
112 (x86_linux_dr_get_control): Likewise.
113 (x86_linux_dr_get_status): Likewise.
114 (update_debug_registers_callback): Likewise.
115 (x86_linux_dr_set_control): Likewise.
116 (x86_linux_dr_set_addr): Likewise.
117 (x86_linux_prepare_to_resume): Likewise.
118 (x86_linux_new_thread): Likewise.
120 2015-03-24 Gary Benson <gbenson@redhat.com>
122 * x86-linux-nat.c (x86_linux_dr_set_addr): Update assertion.
123 (x86_linux_new_thread): Rename argument.
125 2015-03-24 Gary Benson <gbenson@redhat.com>
127 * nat/x86-linux.h: New file.
128 * nat/x86-linux.c: Likewise.
129 * Makefile.in (HFILES_NO_SRCDIR): Add nat/x86-linux.h.
130 (x86-linux.o): New rule.
131 * config/i386/linux.mh (NATDEPFILES): Add x86-linux.o.
132 * config/i386/linux64.mh (NATDEPFILES): Likewise.
133 * nat/linux-nat.h (struct arch_lwp_info): New forward declaration.
134 (lwp_set_arch_private_info): New declaration.
135 (lwp_arch_private_info): Likewise.
136 * linux-nat.c (lwp_set_arch_private_info): New function.
137 (lwp_arch_private_info): Likewise.
138 * x86-linux-nat.c: Include nat/x86-linux.h.
139 (arch_lwp_info): Removed structure.
140 (update_debug_registers_callback):
141 Use lwp_set_debug_registers_changed.
142 (x86_linux_prepare_to_resume): Use lwp_debug_registers_changed
143 and lwp_set_debug_registers_changed.
144 (x86_linux_new_thread): Use lwp_set_debug_registers_changed.
146 2015-03-24 Gary Benson <gbenson@redhat.com>
148 * nat/linux-nat.h (ptid_of_lwp): New declaration.
149 (lwp_is_stopped): Likewise.
150 (lwp_stop_reason): Likewise.
151 * linux-nat.c (ptid_of_lwp): New function.
152 (lwp_is_stopped): Likewise.
153 (lwp_is_stopped_by_watchpoint): Likewise.
154 * x86-linux-nat.c (update_debug_registers_callback):
156 (x86_linux_prepare_to_resume): Use ptid_of_lwp and
159 2015-03-24 Gary Benson <gbenson@redhat.com>
161 * linux-nat.h (linux_stop_lwp): Move declaration to...
162 * nat/linux-nat.h (linux_stop_lwp): New declaration.
164 2015-03-24 Gary Benson <gbenson@redhat.com>
166 * linux-nat.h: Include nat/linux-nat.h.
167 (iterate_over_lwps): Move declaration to nat/linux-nat.h.
168 * nat/linux-nat.h (struct lwp_info): New forward declaration.
169 (iterate_over_lwps_ftype): New typedef.
170 (iterate_over_lwps): New declaration.
171 * linux-nat.h (iterate_over_lwps): Update comment. Use
172 iterate_over_lwps_ftype. Update callback return value check.
174 2015-03-24 Gary Benson <gbenson@redhat.com>
176 * x86-nat.h (x86_debug_reg_state): Move declaration to...
177 * nat/x86-dregs.h (x86_debug_reg_state): New declaration.
179 2015-03-24 Gary Benson <gbenson@redhat.com>
181 * nat/linux-nat.h (current_lwp_ptid): New declaration.
182 * linux-nat.c (current_lwp_ptid): New function.
183 * x86-linux-nat.c: Include nat/linux-nat.h.
184 (x86_linux_dr_get_addr): Use current_lwp_ptid.
185 (x86_linux_dr_get_control): Likewise.
186 (x86_linux_dr_get_status): Likewise.
187 (x86_linux_dr_set_control): Likewise.
188 (x86_linux_dr_set_addr): Likewise.
190 2015-03-24 Antoine Tremblay <antoine.tremblay@ericsson.com>
193 * breakpoint.c (create_breakpoint): Set thread on breakpoint struct.
195 2015-03-23 Joel Brobecker <brobecker@adacore.com>
197 * ser-mingw.c (ser_windows_setparity): Fix indentation.
198 * ser-unix.c (hardwire_setparity): Likewise.
200 2015-03-23 Yurij Grechishhev <yurij.grechishhev@gmail.com>
202 * NEWS: Mention set/show serial parity command.
203 * monitor.c (monitor_open): Call serial_setparity.
204 * remote.c (remote_open_1): Likewise.
205 * ser-base.c (ser_base_serparity): New function.
206 * ser-base.h (ser_base_setparity): Add declaration.
207 * ser-go32.c (dos_ops): Set "setparity" field.
208 * ser-mingw.c (ser_windows_raw): Do not set state.fParity and
210 (ser_windows_setparity): New function.
211 (hardwire_ops): Add ser_windows_setparity.
212 (tty_ops): Add NULL for setparity field.
213 (pipe_ops): Add ser_base_setparity.
215 * ser-pipe.c (pipe_ops): Likewise.
216 * ser-tcp.c (tcp_ops): Likewise.
217 * ser-unix.c (hardwire_setparity): Add declaration.
218 (hardwire_raw): Don't reset PARENB flag.
219 (hardwire_setparity): New function.
220 (hardwire_ops): Add hardwire_setparity.
221 * serial.c (serial_setparity): New function.
222 (serial_parity): New global.
223 (parity_none, parity_odd, parity_even, parity_enums, parity):
225 (set_parity): New function.
226 (_initialize_serial): Add set/show serial parity commands.
227 * serial.h (GDBPARITY_NONE): Define.
228 (GDBPARITY_ODD): Define.
229 (GDBPARITY_EVEN): Define.
230 (serial_setparity) Add declaration.
231 (struct serial_ops): Add setparity field.
232 * target.h (serial_parity): Add declaration.
234 2015-03-23 Keith Seitz <keiths@redhat.com>
236 * linespec.c (linespec_lexer_lex_keyword): Update comment.
238 2015-03-23 Keith Seitz <keiths@redhat.com>
240 * breakpoint.c (parse_breakpoint_sals): Use
241 linespec_lexer_lex_keyword to ascertain if the user specified
243 * linespec.c [IF_KEYWORD_INDEX]: Define.
244 (linespec_lexer_lex_keyword): Export.
245 (struct ls_parser) <keyword_ok>: Remove.
246 A keyword is only a keyword if not followed by another keyword.
247 (linespec_lexer_lex_one): Remove keyword_ok handling.
248 Add comment explaining why the parsing stream is not advanced
249 when a keyword is seen.
250 (parse_linespec): Remove parser->keyword_ok.
251 * linespec.h (linespec_lexer_lex_keyword): Add declaration.
253 2015-03-23 Keith Seitz <keiths@redhat.com>
256 * dwarf2read.c (dwarf2_add_member_fn): Issue a complaint
257 if we find a static method with DW_AT_vtable_elem_location.
259 2015-03-21 Eli Zaretskii <eliz@gnu.org>
261 * tui/tui-io.c (tui_expand_tabs): Reinitialize the column counter
262 before the second loop, to avoid undefined behavior. Reported by
263 Anton Blanchard <anton@samba.org>.
265 2015-03-20 Keven Boell <keven.boell@intel.com>
267 * gdbtypes.c (resolve_dynamic_type_internal): Adapt
268 data_location usage to linked list.
269 (resolve_dynamic_type_internal): Adapt data_location to
271 (get_dyn_prop, add_dyn_prop, copy_dynamic_prop_list): New function.
272 (copy_type_recursive, copy_type): Add copy of linked list.
273 * gdbtypes.h (enum dynamic_prop_node_kind): New enum.
274 (struct dynamic_prop_list): New struct.
275 * dwarf2read.c (set_die_type): Set data_location data.
277 2015-03-20 Pedro Alves <palves@redhat.com>
279 * i386-sol2-tdep.c (i386_sol2_static_transform_name): Move "p" to
280 inner block and make it const.
281 * machoread.c (get_archive_prefix_len): Make "lparen" const.
283 2015-03-20 Pedro Alves <palves@redhat.com>
285 * breakpoint.c (set_breakpoint_condition): Make argument "exp" const.
286 * breakpoint.h (set_breakpoint_condition): Update declaration.
288 2015-03-20 Pedro Alves <palves@redhat.com>
290 * tui/tui-io.c (tui_expand_tabs): Make "s1" const.
292 2015-03-20 Pedro Alves <palves@redhat.com>
294 * xcoffread.c (scan_xcoff_symtab): Make "p" and "q" const.
296 2015-03-20 Pedro Alves <palves@redhat.com>
298 * remote-m32r-sdi.c (m32r_open): Make "port_str" const.
300 2015-03-20 Pedro Alves <palves@redhat.com>
302 * nto-tdep.c (nto_find_and_open_solib): Make "endian" const.
303 (nto_init_solib_absolute_prefix): Likewise.
305 2015-03-20 Pedro Alves <palves@redhat.com>
307 * sparc-sol2-tdep.c (sparc_sol2_static_transform_name): Make "p" const.
308 * spu-tdep.c (spu_gdbarch_init): Make "name" const.
310 2015-03-20 Jan Kratochvil <jan.kratochvil@redhat.com>
312 * config/djgpp/README: Remove gdb.hp.
314 2015-03-20 Yao Qi <yao.qi@linaro.org>
316 * aarch64-tdep.c (aarch64_gdbarch_init): Don't call
317 set_gdbarch_cannot_step_breakpoint.
319 2015-03-19 Pedro Alves <palves@redhat.com>
321 * linux-nat.c (linux_resume_one_lwp): Rename to ...
322 (linux_resume_one_lwp_throw): ... this. Don't handle ESRCH here,
323 instead call perror_with_name.
324 (check_ptrace_stopped_lwp_gone): New function.
325 (linux_resume_one_lwp): Reimplement as wrapper around
326 linux_resume_one_lwp_throw that swallows errors if the LWP is
328 (resume_stopped_resumed_lwps): Try register reads in TRY/CATCH and
329 swallows errors if the LWP is gone. Use
330 linux_resume_one_lwp_throw instead of linux_resume_one_lwp.
332 2015-03-19 Pedro Alves <palves@redhat.com>
334 * linux-nat.c (status_callback): Return early if the LWP has no
337 2015-03-19 Pedro Alves <palves@redhat.com>
339 * linux-nat.c (select_event_lwp_callback): Update comment to no
340 longer mention SIGTRAP.
342 2015-03-18 Tristan Gingold <gingold@adacore.com>
344 * amd64-windows-tdep.c (amd64_windows_find_unwind_info): Move
345 redirection code to ...
346 (amd64_windows_frame_decode_insns): ... Here. Fix in prologue
347 checks. Fix SAVE_NONVOL operations. Add debug code and comments.
349 2015-03-18 Gary Benson <gbenson@redhat.com>
351 (remote_protocol_features): Remove the "vFile:fstat" feature.
352 (remote_hostio_fstat): Probe for "vFile:fstat" support.
354 2015-03-11 Yao Qi <yao.qi@linaro.org>
357 * aarch64-linux-tdep.c: Include xml-syscall.h
358 (aarch64_linux_get_syscall_number): New function.
359 (aarch64_linux_init_abi): Call
360 set_gdbarch_get_syscall_number.
361 * syscalls/aarch64-linux.xml: New file.
363 2015-03-17 Yurij Grechishhev <yurij.grechishhev@gmail.com>
365 * ser-base.h (ser_base_setstopbits): Change second argument name
366 from "rate" to "num".
368 2015-03-17 Gary Benson <gbenson@redhat.com>
369 Luke Allardyce <lukeallardyce@gmail.com>
372 * common/common-remote-fileio.h (sys/stat.h): New include.
373 (stuct stat): Remove forward declaration.
375 2015-03-16 John Baldwin <jhb@FreeBSD.org>
377 * fbsd-tdep.c (fbsd_make_corefile_notes): Fetch all target registers
378 before writing core register notes.
380 2015-03-16 Yuanhui Zhang <asmwarrior@gmail.com>
381 Pedro Alves <palves@redhat.com>
383 * gdb_curses.h (tgetnum): Mark with EXTERN_C.
384 * stub-termcap.c (tgetent, tgetnum, tgetflag, tgetstr, tputs)
385 (tgoto): Wrap with extern "C".
387 2015-03-16 Pedro Alves <palves@redhat.com>
388 Yuanhui Zhang <asmwarrior@gmail.com>
390 * stub-termcap.c (tputs): Change prototype.
392 2015-03-16 Yuanhui Zhang <asmwarrior@gmail.com>
393 Pedro Alves <palves@redhat.com>
395 * windows-nat.c (struct thread_info_struct): Rename to ...
396 (struct windows_thread_info_struct): ... this.
397 (thread_info): Rename to ...
398 (windows_thread_info): ... this.
401 2015-03-14 Jan Kratochvil <jan.kratochvil@redhat.com>
402 Pedro Alves <palves@redhat.com>
404 * NEWS: New Removed targets and native configurations.
406 2015-03-13 Jan Kratochvil <jan.kratochvil@redhat.com>
409 * Makefile.in (ALL_64_TARGET_OBS): Remove ia64-hpux-tdep.o.
410 (ALL_TARGET_OBS): Remove hppa-hpux-tdep.o, solib-som.o and solib-pa64.o.
411 (HFILES_NO_SRCDIR): Remove solib-som.h, inf-ttrace.h, solib-pa64.h and
412 ia64-hpux-tdep.h, solib-ia64-hpux.h.
413 (ALLDEPFILES): Remove hppa-hpux-tdep.c, hppa-hpux-nat.c,
414 ia64-hpux-nat.c, ia64-hpux-tdep.c, somread.c and solib-som.c.
415 * config/djgpp/fnchange.lst: Remove hppa-hpux-nat.c and
417 * config/ia64/hpux.mh: Remove file.
418 * config/pa/hpux.mh: Remove file.
419 * configure: Rebuilt.
420 * configure.ac (dlgetmodinfo, somread.o): Remove.
421 * configure.host (hppa*-*-hpux*, ia64-*-hpux*): Make them obsolete.
422 (ia64-*-hpux*): Remove its float format exception.
423 * configure.tgt (hppa*-*-hpux*, ia64-*-hpux*): Make them obsolete.
424 * hppa-hpux-nat.c: Remove file.
425 * hppa-hpux-tdep.c: Remove file.
426 * hppa-tdep.c (struct hppa_unwind_info, struct hppa_objfile_private):
427 Move them here from hppa-tdep.h
428 (hppa_objfile_priv_data, hppa_init_objfile_priv_data): Make it static.
429 (hppa_frame_prev_register_helper): Remove HPPA_FLAGS_REGNUM exception.
430 * hppa-tdep.h (struct hppa_unwind_info, struct hppa_objfile_private):
431 Move them to hppa-tdep.c.
432 (hppa_objfile_priv_data, hppa_init_objfile_priv_data): Remove
434 * ia64-hpux-nat.c: Remove file.
435 * ia64-hpux-tdep.c: Remove file.
436 * ia64-hpux-tdep.h: Remove file.
437 * inf-ttrace.c: Remove file.
438 * inf-ttrace.h: Remove file.
439 * solib-ia64-hpux.c: Remove file.
440 * solib-ia64-hpux.h: Remove file.
441 * solib-pa64.c: Remove file.
442 * solib-pa64.h: Remove file.
443 * solib-som.c: Remove file.
444 * solib-som.h: Remove file.
445 * somread.c: Remove file.
447 2015-03-13 John Baldwin <jhb@FreeBSD.org>
449 * configure.ac: AC_SEARCH_LIBS(kinfo_getvmmap, util).
450 * config.in: Regenerate.
451 * configure: Regenerate.
452 * fbsd-nat.c [!HAVE_KINFO_GETVMMAP] (fbsd_read_mapping): Don't
454 (fbsd_find_memory_regions): Use kinfo_getvmmap to
455 enumerate memory regions if present.
457 2015-03-13 John Baldwin <jhb@FreeBSD.org>
459 * amd64fbsd-tdep.c (amd64fbsd_sigtramp_p): Style fixes.
460 * i386fbsd-tdep.c: Fix style in various gdb_static_assert
462 (i386fbsd_sigtramp_p): Likewise.
464 2015-03-12 John Baldwin <jhb@FreeBSD.org>
466 * MAINTAINERS (Write After Approval): Add John Baldwin.
468 2015-03-12 Gary Benson <gbenson@redhat.com>
470 * solib.c (_initialize_solib): Make "set/show sysroot" use
471 add_setshow_optional_filename_cmd so it can be restored to
472 empty after being set.
474 2015-03-11 Sergio Durigan Junior <sergiodj@redhat.com>
476 * Makefile.in (SFILES): New source break-catch-syscall.c.
477 (COMMON_OBS): New object break-catch-syscall.o.
478 * break-catch-syscall.c: New file.
479 * breakpoint.c: Remove inclusion of "xml-syscall.h".
480 (syscall_catchpoint_p): Move declaration to break-catch-syscall.c
481 (struct syscall_catchpoint): Likewise.
482 (dtor_catch_syscall): Likewise.
483 (catch_syscall_inferior_data): Likewise.
484 (struct catch_syscall_inferior_data): Likewise.
485 (get_catch_syscall_inferior_data): Likewise.
486 (catch_syscall_inferior_data_cleanup): Likewise.
487 (insert_catch_syscall): Likewise.
488 (remove_catch_syscall): Likewise.
489 (breakpoint_hit_catch_syscall): Likewise.
490 (print_it_catch_syscall): Likewise.
491 (print_one_catch_syscall): Likewise.
492 (print_mention_catch_syscall): Likewise.
493 (print_recreate_catch_syscall): Likewise.
494 (catch_syscall_breakpoint_ops): Likewise.
495 (syscall_catchpoint_p): Likewise.
496 (create_syscall_event_catchpoint): Likewise.
497 (catch_syscall_split_args): Likewise.
498 (catch_syscall_command_1): Likewise.
499 (is_syscall_catchpoint_enabled): Likewise.
500 (catch_syscall_enabled): Likewise.
501 (catching_syscall_number): Likewise.
502 (catch_syscall_completer): Likewise.
503 (clear_syscall_counts): Likewise.
504 (initialize_breakpoint_ops): Move initialization of syscall
505 catchpoints to break-catch-syscall.c.
506 (_initialize_breakpoint): Move code related to syscall catchpoints
507 to break-catch-syscall.c.
509 2015-03-11 Sergio Durigan Junior <sergiodj@redhat.com>
511 * breakpoint.c (breakpoint_find_if): New function.
512 * breakpoint.h (breakpoint_find_if): New prototype.
514 2015-03-11 Gary Benson <gbenson@redhat.com>
516 * remote-fileio.h (remote_fileio_to_host_stat): New declaration.
517 * remote-fileio.c (remote_fileio_to_host_uint): New function.
518 (remote_fileio_to_host_ulong): Likewise.
519 (remote_fileio_to_host_mode): Likewise.
520 (remote_fileio_to_host_time): Likewise.
521 (remote_fileio_to_host_stat): Likewise.
522 * remote.c (PACKET_vFile_fstat): New enum value.
523 (remote_protocol_features): Register the "vFile:fstat" feature.
524 (remote_hostio_fstat): New function.
525 (remote_bfd_iovec_stat): Use the above.
526 (_initialize_remote): Register new "set/show remote
527 hostio-fstat-packet" command.
528 * symfile.c (separate_debug_file_exists): Update comment.
529 * NEWS: Announce new vFile:fstat packet.
531 2015-03-11 Gary Benson <gbenson@redhat.com>
533 * common/common-remote-fileio.h: New file.
534 * common/common-remote-fileio.c: Likewise.
535 * Makefile.in (SFILES): Add common/common-remote-fileio.c.
536 (HFILES_NO_SRCDIR): Add common/common-remote-fileio.h.
537 (COMMON_OBS): Add common-remote-fileio.o.
538 (common-remote-fileio.o): New rule.
539 * remote-fileio.h (common-remote-fileio.h): New include.
540 * remote-fileio.c (gdb/fileio.h): Do not include.
541 (remote_fileio_to_be): Moved to common-remote-fileio.h.
542 (remote_fileio_to_fio_uint): Likewise.
543 (remote_fileio_to_fio_time): Likewise.
544 (remote_fileio_mode_to_target): Moved to common-remote-fileio.c.
545 (remote_fileio_to_fio_mode): Likewise.
546 (remote_fileio_to_fio_ulong): Likewise.
547 (remote_fileio_to_fio_stat): Likewise.
549 2015-03-11 Andy Wingo <wingo@igalia.com>
551 * guile/scm-value.c (gdbscm_value_dynamic_type): Fix typo in which
552 we were checking the cached type, not the cached dynamic type.
554 2015-03-11 Andy Wingo <wingo@igalia.com>
556 * guile/scm-cmd.c (cmdscm_destroyer): Don't xfree the name and
557 other strings, as these are on the GC'd heap, and will be
558 collected along with the smob.
560 2015-03-11 Andy Wingo <wingo@igalia.com>
562 * guile/scm-objfile.c (gdbscm_objfile_progspace): New function.
563 (objfile_functions): Bind gdbscm_objfile_progspace to
565 * guile/lib/gdb.scm: Add objfile-progspace to exports.
567 2015-03-11 Andy Wingo <wingo@igalia.com>
569 * guile/guile.c (_initialize_guile): Disable automatic
570 finalization, if Guile offers us that possibility.
571 * guile/guile.c (call_initialize_gdb_module):
572 * guile/scm-safe-call.c (gdbscm_with_catch): Arrange to run
573 finalizers in appropriate places.
574 * configure.ac (AC_TRY_LIBGUILE): Add a check for
575 scm_set_automatic_finalization_enabled.
576 * configure: Regenerated.
578 2015-03-11 Andreas Arnez <arnez@linux.vnet.ibm.com>
580 * s390-linux-tdep.c (s390_skip_prologue): Skip the prologue using
583 2015-03-11 Andreas Arnez <arnez@linux.vnet.ibm.com>
585 * s390-linux-nat.c (struct arch_lwp_info): New.
586 (s390_fix_watch_points): Rename to...
587 (s390_prepare_to_resume): ...this. Skip the PER info update
588 unless the watch points have changed.
589 (s390_refresh_per_info, s390_new_thread): New functions.
590 (s390_insert_watchpoint): Call s390_refresh_per_info instead of
591 s390_fix_watch_points.
592 (s390_remove_watchpoint): Likewise.
593 (_initialize_s390_nat): Reflect renaming of s390_fix_watch_points.
594 Register s390_prepare_to_resume.
596 2015-03-09 Pedro Alves <palves@redhat.com>
599 2015-03-07 Pedro Alves <palves@redhat.com>
600 * common/gdb_socket.h: New file.
601 * ser-tcp.c: Include gdb_socket.h. Don't include netinet/in.h nor
603 (net_open): Use union gdb_sockaddr_u.
605 2015-03-07 Pedro Alves <palves@redhat.com>
607 * configure.ac (build_warnings): Move -Wmissing-prototypes
608 -Wdeclaration-after-statement -Wmissing-parameter-type
609 -Wold-style-declaration -Wold-style-definition to the C-specific
611 * configure: Regenerate.
613 2015-03-07 Pedro Alves <palves@redhat.com>
615 * common/gdb_socket.h: New file.
616 * ser-tcp.c: Include gdb_socket.h. Don't include netinet/in.h nor
618 (net_open): Use union gdb_sockaddr_u.
620 2015-03-07 Pedro Alves <palves@redhat.com>
622 * common/common-exceptions.c [!__cplusplus] (enum catcher_state)
623 (exceptions_state_mc_action_iter)
624 (exceptions_state_mc_action_iter_1, exceptions_state_mc_catch):
626 [__cplusplus] (try_scope_depth): New global.
627 [__cplusplus] (exception_try_scope_entry)
628 (exception_try_scope_exit, gdb_exception_sliced_copy)
629 (exception_rethrow): New functions.
630 (throw_exception): In C++ mode, throw
631 gdb_exception_RETURN_MASK_QUIT for RETURN_QUIT and
632 gdb_exception_RETURN_MASK_ERROR for RETURN_ERROR.
633 (throw_it): In C++ mode, use try_scope_depth.
634 * common/common-exceptions.h [!__cplusplus]
635 (exceptions_state_mc_action_iter)
636 (exceptions_state_mc_action_iter_1, exceptions_state_mc_catch):
638 [__cplusplus] (exception_try_scope_entry)
639 (exception_try_scope_exit, exception_rethrow): Declare.
640 [__cplusplus] (struct exception_try_scope): New struct.
641 [__cplusplus] (TRY, CATCH, END_CATCH): Reimplement on top of real
643 (struct gdb_exception_RETURN_MASK_ALL)
644 (struct gdb_exception_RETURN_MASK_ERROR)
645 (struct gdb_exception_RETURN_MASK_QUIT): New types.
647 2015-03-07 Pedro Alves <palves@redhat.com>
649 * main.c (handle_command_errors): Remove volatile qualifier from
652 2015-03-07 Pedro Alves <palves@redhat.com>
654 * breakpoint.c (save_breakpoints): Adjust to avoid code between
656 * gdbtypes.c (safe_parse_type): Remove empty line.
657 (types_deeply_equal):
658 * guile/scm-frame.c (gdbscm_frame_name):
659 * linux-thread-db.c (find_new_threads_once):
660 * python/py-breakpoint.c (bppy_get_commands):
661 * record-btrace.c (record_btrace_insert_breakpoint)
662 (record_btrace_remove_breakpoint, record_btrace_start_replaying)
663 (record_btrace_start_replaying): Adjust to avoid code between TRY
666 2015-03-07 Pedro Alves <palves@redhat.com>
668 * common/common-exceptions.c (struct catcher) <exception>: No
669 longer a pointer to volatile exception. Now an exception value.
670 <mask>: Delete field.
671 (exceptions_state_mc_init): Remove all parameters. Adjust.
672 (exceptions_state_mc): No longer pop the catcher here.
673 (exceptions_state_mc_catch): New function.
674 (throw_exception): Adjust.
675 * common/common-exceptions.h (exceptions_state_mc_init): Remove
677 (exceptions_state_mc_catch): Declare.
678 (TRY_CATCH): Rename to ...
679 (TRY): ... this. Remove EXCEPTION and MASK parameters.
680 (CATCH, END_CATCH): New.
681 All callers adjusted.
683 2015-03-07 Tom Tromey <tromey@redhat.com>
685 * top.c (quit_force): Inline and delete DO_TRY, DO_PRINT_EX.
687 2015-03-07 Pedro Alves <palves@redhat.com>
689 * amd64-tdep.c (amd64_frame_cache, amd64_sigtramp_frame_cache)
690 (amd64_epilogue_frame_cache): Normal exception handling code.
691 * break-catch-throw.c (check_status_exception_catchpoint)
692 (re_set_exception_catchpoint): Ditto.
693 * cli/cli-interp.c (safe_execute_command):
694 * cli/cli-script.c (script_from_file): Ditto.
695 * compile/compile-c-symbols.c (generate_c_for_for_one_variable):
697 * compile/compile-object-run.c (compile_object_run): Ditto.
698 * cp-abi.c (baseclass_offset): Ditto.
699 * cp-valprint.c (cp_print_value): Ditto.
700 * exceptions.c (catch_exceptions_with_msg):
701 * frame-unwind.c (frame_unwind_try_unwinder): Ditto.
702 * frame.c (get_frame_address_in_block_if_available): Ditto.
703 * i386-tdep.c (i386_frame_cache, i386_epilogue_frame_cache)
704 (i386_sigtramp_frame_cache): Ditto.
705 * infcmd.c (post_create_inferior): Ditto.
706 * linespec.c (parse_linespec, find_linespec_symbols):
707 * p-valprint.c (pascal_object_print_value): Ditto.
708 * parse.c (parse_expression_for_completion): Ditto.
709 * python/py-finishbreakpoint.c (bpfinishpy_init): Ditto.
710 * remote.c (remote_get_noisy_reply): Ditto.
711 * s390-linux-tdep.c (s390_frame_unwind_cache): Ditto.
712 * solib-svr4.c (solib_svr4_r_map): Ditto.
714 2015-03-06 Gary Benson <gbenson@redhat.com>
716 * common/common-utils.h (startswith): New inline function.
717 All places where this logic was used updated to use the above.
719 2015-03-05 Pedro Alves <palves@redhat.com>
722 * mem-break.c (default_memory_insert_breakpoint): Set shadow_len
723 after reading the breakpoint's shadow memory.
725 2015-03-05 Mark Kettenis <kettenis@gnu.org>
727 * hppabsd-nat.c: Remove file.
728 * hppaobsd-nat.c: New file.
729 * Makefile.in (ALLDEPFILES): Remove hppabsd-nat.c. Add
731 * config/pa/obsd.mh (NATDEPFILES): Replace hppabsd-nat.o with
734 2015-03-04 Pedro Alves <palves@redhat.com>
736 * target.h (struct target_ops) <to_decr_pc_after_break>: Delete.
737 (target_decr_pc_after_break): Delete declaration.
738 * target.c (default_target_decr_pc_after_break)
739 (target_decr_pc_after_break): Delete.
740 * linux-nat.c (check_stopped_by_breakpoint, linux_nat_wait_1): Use
741 gdbarch_decr_pc_after_break instead of target_decr_pc_after_break.
742 * linux-thread-db.c (check_event): Likewise.
743 * infrun.c (adjust_pc_after_break): Likewise.
744 * darwin-nat.c (cancel_breakpoint): Likewise.
745 * aix-thread.c (aix_thread_wait): Likewise.
746 * target-delegates.c: Regenerate.
748 2015-03-04 Pedro Alves <palves@redhat.com>
750 * linux-nat.c (save_sigtrap): Check for breakpoints before
751 checking watchpoints.
752 (status_callback) [USE_SIGTRAP_SIGINFO]: Don't check whether a
753 breakpoint is inserted if relying on SIGTRAP's siginfo.si_code.
754 (check_stopped_by_breakpoint) [USE_SIGTRAP_SIGINFO]: Decide whether
755 a breakpoint triggered based on the SIGTRAP's siginfo.si_code.
756 (linux_nat_stopped_by_sw_breakpoint)
757 (linux_nat_supports_stopped_by_sw_breakpoint)
758 (linux_nat_stopped_by_hw_breakpoint)
759 (linux_nat_supports_stopped_by_hw_breakpoint): New functions.
760 (linux_nat_wait_1): Don't re-increment the PC if relying on
761 SIGTRAP's siginfo->si_code.
762 (linux_nat_add_target): Install new target methods.
763 * linux-thread-db.c (check_event): Don't account for breakpoint PC
764 offset if the target already adjusted the PC.
765 * nat/linux-ptrace.h (USE_SIGTRAP_SIGINFO): New.
766 (GDB_ARCH_TRAP_BRKPT): New.
767 (TRAP_HWBKPT): Define if not already defined.
769 2015-03-04 Pedro Alves <palves@redhat.com>
771 * NEWS: Mention the new "swbreak" and "hwbreak" stop reasons.
772 * remote.c (struct remote_state) <remote_stopped_by_watchpoint_p>:
774 <stop_reason>: New field.
775 (PACKET_swbreak_feature, PACKET_hwbreak_feature): New enum values.
776 (packet_set_cmd_state): New function.
777 (remote_protocol_features): Register the "swbreak" and "hwbreak"
779 (remote_query_supported): If not disabled with the corresponding
780 "set remote foo-packet" command, report support for the swbreak
781 and hwbreak features.
782 (struct stop_reply) <remote_stopped_by_watchpoint_p>: Delete
784 <stop_reason>: New field.
785 (remote_parse_stop_reply): Handle "swbreak" and "hwbreak".
786 (remote_wait_as): Adjust.
787 (remote_stopped_by_sw_breakpoint)
788 (remote_supports_stopped_by_sw_breakpoint)
789 (remote_stopped_by_hw_breakpoint)
790 (remote_supports_stopped_by_hw_breakpoint): New functions.
791 (remote_stopped_by_watchpoint): New function.
792 (init_remote_ops): Install them.
793 (_initialize_remote): Register new "set/show remote
794 swbreak-feature-packet" and "set/show remote
795 swbreak-feature-packet" commands.
797 2015-03-04 Pedro Alves <palves@redhat.com>
799 * btrace.h: Include target/waitstatus.h.
800 (struct btrace_thread_info) <stop_reason>: New field.
801 * record-btrace.c (record_btrace_step_thread): Use
802 record_check_stopped_by_breakpoint instead of breakpoint_here_p.
803 (record_btrace_decr_pc_after_break): Delete.
804 (record_btrace_stopped_by_sw_breakpoint)
805 (record_btrace_supports_stopped_by_sw_breakpoint)
806 (record_btrace_stopped_by_hw_breakpoint)
807 (record_btrace_supports_stopped_by_hw_breakpoint): New functions.
808 (init_record_btrace_ops): Install them.
809 * record-full.c (record_full_hw_watchpoint): Delete and replace
811 (record_full_stop_reason): ... this throughout.
812 (record_full_exec_insn): Adjust.
813 (record_full_wait_1): Adjust. No longer re-increment the PC.
814 (record_full_wait_1): Adjust. Use
815 record_check_stopped_by_breakpoint instead of breakpoint_here_p.
816 (record_full_stopped_by_watchpoint): Adjust.
817 (record_full_stopped_by_sw_breakpoint)
818 (record_full_supports_stopped_by_sw_breakpoint)
819 (record_full_supports_stopped_by_sw_breakpoint)
820 (record_full_stopped_by_hw_breakpoint)
821 (record_full_supports_stopped_by_hw_breakpoint): New functions.
822 (init_record_full_ops, init_record_full_core_ops): Install them.
823 * record.c (record_check_stopped_by_breakpoint): New function.
824 * record.h: Include target/waitstatus.h.
825 (record_check_stopped_by_breakpoint): New declaration.
827 2015-03-04 Pedro Alves <palves@redhat.com>
829 enum lwp_stop_reason -> enum target_stop_reason
830 * linux-nat.c (linux_resume_one_lwp, check_stopped_by_watchpoint)
831 (linux_nat_stopped_by_watchpoint, status_callback)
832 (linux_nat_wait_1): Adjust.
833 * linux-nat.h (enum lwp_stop_reason): Delete.
834 (struct lwp_info) <stop_reason>: Now an enum target_stop_reason.
835 * x86-linux-nat.c (x86_linux_prepare_to_resume): Adjust.
836 * target/waitstatus.h (enum target_stop_reason): New.
838 2015-03-04 Pedro Alves <palves@redhat.com>
840 * breakpoint.c (need_moribund_for_location_type): New function.
841 (bpstat_stop_status): Don't skipping checking moribund locations
842 of breakpoint types which the target tell caused a stop.
843 (program_breakpoint_here_p): New function, factored out from ...
844 (bp_loc_is_permanent): ... this.
845 (update_global_location_list): Don't create a moribund location if
846 the target supports reporting stops of the type of the removed
848 * breakpoint.h (program_breakpoint_here_p): New declaration.
849 * infrun.c (adjust_pc_after_break): Return early if the target has
850 already adjusted the PC. Add comments.
851 (handle_signal_stop): If nothing explains a signal, and the target
852 tells us the stop was caused by a software breakpoint, check if
853 there's a breakpoint instruction in the memory. If so, adjust the
854 PC before presenting the stop to the user. Otherwise, ignore the
855 trap. If nothing explains a signal, and the target tells us the
856 stop was caused by a hardware breakpoint, ignore the trap.
857 * target.h (struct target_ops) <to_stopped_by_sw_breakpoint,
858 to_supports_stopped_by_sw_breakpoint, to_stopped_by_hw_breakpoint,
859 to_supports_stopped_by_hw_breakpoint>: New fields.
860 (target_stopped_by_sw_breakpoint)
861 (target_supports_stopped_by_sw_breakpoint)
862 (target_stopped_by_hw_breakpoint)
863 (target_supports_stopped_by_hw_breakpoint): Define.
864 * target-delegates.c: Regenerate.
866 2015-03-04 Pedro Alves <palves@redhat.com>
868 * infrun.c (follow_fork_inferior): Use the whole of the
869 inferior_ptid and pending_follow.related_pid ptids instead of
870 building ptids from the process components. Adjust verbose output
871 to use target_pid_to_str.
872 * linux-nat.c (linux_child_follow_fork): Use the whole of the
873 inferior_ptid and pending_follow.related_pid ptids instead of
874 building ptids from the process components.
876 2015-03-04 Mark Kettenis <kettenis@gnu.org>
878 * inf-ptrace.c [PT_GET_PROCESS_STATE]
879 (inf_ptrace_insert_fork_catchpoint): New function.
880 (inf_ptrace_remove_fork_catchpoint): New function.
881 (inf_ptrace_target) [PT_GET_PROCESS_STATE]: Install them.
883 2015-03-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
885 * s390-linux-tdep.c (s390_register_name): Return empty string
886 instead of NULL for registers that shouldn't be visible.
888 2015-03-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
890 * s390-linux-tdep.c (s390_gdbarch_init): Use the correct syscall
891 XML file for 64-bit targets.
893 2015-03-03 Simon Marchi <simon.marchi@ericsson.com>
895 * target.h (find_default_create_inferior): Remove declaration.
896 (find_default_attach): Likewise.
898 2015-03-03 Pedro Alves <palves@redhat.com>
900 * inf-ptrace.c (inf_ptrace_resume): Remove spurious whitespace.
901 Use ptid_get_pid to get the overall process id when resuming all
904 2015-03-03 Pedro Alves <palves@redhat.com>
906 * i386-linux-nat.c (i386_linux_resume): Get the ptrace PID out of
907 the lwp field of ptid. Pass the full ptid to get_thread_regcache.
908 * inf-ptrace.c (get_ptrace_pid): New function.
909 (inf_ptrace_resume): Use it.
910 * linux-nat.c (linux_resume_one_lwp): Pass the LWP's ptid ummodified
913 2015-03-03 Markus Metzger <markus.t.metzger@intel.com>
915 * nat/linux-btrace.c: Include sys/utsname.h.
916 (linux_determine_kernel_ptr_bits): New.
917 (linux_enable_bts): Call linux_determine_kernel_ptr_bits.
918 * x86-linux-nat.c (x86_linux_enable_btrace): Do not overwrite non-zero
921 2015-03-03 Markus Metzger <markus.t.metzger@intel.com>
923 * btrace.c (ftrace_update_function): Treat return as tailcall for
924 "_dl_runtime_resolve".
926 2015-03-03 Markus Metzger <markus.t.metzger@intel.com>
928 * btrace.h (btrace_function) <lbegin, lend>: Remove.
929 * btrace.c (ftrace_debug): Do not print the line range.
930 (ftrace_skip_file, ftrace_update_lines): Remove.
931 (ftrace_new_function): Remove lbegin and lend initialization.
932 (btrace_compute_ftrace_bts): Remove call to ftrace_update_lines.
933 * record-btrace.c (btrace_compute_src_line_range): New.
934 (btrace_call_history_src_line): Call btrace_compute_src_line_range.
936 2015-03-02 Pedro Alves <palves@redhat.com>
938 * infrun.c (follow_exec): Delete all threads of the process except
939 the event thread. Extended comments.
941 2015-03-02 Joel Brobecker <brobecker@adacore.com>
943 * contrib/ari/gdb_ari.sh: Reinstate checks for "true" and "false".
945 2015-03-02 Joel Brobecker <brobecker@adacore.com>
947 * utils.h: Remove <stdbool.h> #include.
948 (producer_is_gcc): Change return type to "int".
949 * utils.c (producer_is_gcc): Change return type to int.
950 Return 1 instead of true, and 0 instead of false.
951 Adjust function documentation accordingly.
953 2015-03-02 Andreas Arnez <arnez@linux.vnet.ibm.com>
955 * s390-linux-nat.c (have_regset_vxrs): New static variable.
956 (s390_linux_fetch_inferior_registers): Handle vector registers, if
958 (s390_linux_store_inferior_registers): Likewise.
959 (s390_get_hwcap): Remove function. Embed its logic...
960 (s390_read_description): ...here. Yield a target description with
961 vector registers if applicable.
962 * s390-linux-tdep.c: Include "features/s390-vx-linux64.c",
963 "features/s390-tevx-linux64.c", "features/s390x-vx-linux64.c", and
964 "features/s390x-tevx-linux64.c".
965 (struct gdbarch_tdep) <v0_full_regnum>: New field.
966 (s390_dwarf_regmap): Add vector registers. Remove bogus entries
967 for "GNU/Linux-specific registers".
968 (s390_dwarf_reg_r0l): New enum value.
969 (s390_dwarf_reg_to_regnum): Support vector registers.
970 (s390_adjust_frame_regnum): Adjust pseudo DWARF register numbers
972 (regnum_is_vxr_full): New function.
973 (s390_register_name): New function.
974 (s390_pseudo_register_name): Handle v0-v15, which are composed of
976 (s390_pseudo_register_type): Likewise.
977 (s390_pseudo_register_read): Likewise.
978 (s390_pseudo_register_write): Likewise.
979 (s390_value_from_register): Account for the fact that values are
980 placed left-justified in vector registers.
981 (s390_pseudo_register_reggroup_p): Add pseudo registers v0-v15 to
982 the vector reggroup and omit them from the general reggroup.
983 (s390_regmap_vxrs_low, s390_regmap_vxrs_high): New register maps.
984 (s390_vxrs_low_regset, s390_vxrs_high_regset): New regsets.
985 (s390_iterate_over_regset_sections): Add iterations for the two
987 (s390_core_read_description): Yield a target description with
988 vector registers if applicable.
989 (s390_gdbarch_init): Handle target descriptions with vector
990 registers. Add "register_name" gdbarch method.
991 (_initialize_s390_tdep): Call new tdesc initialization functions.
992 * s390-linux-tdep.h (HWCAP_S390_VX): New macro.
993 (S390_V0_LOWER_REGNUM, S390_V1_LOWER_REGNUM, S390_V2_LOWER_REGNUM)
994 (S390_V3_LOWER_REGNUM, S390_V4_LOWER_REGNUM, S390_V5_LOWER_REGNUM)
995 (S390_V6_LOWER_REGNUM, S390_V7_LOWER_REGNUM, S390_V8_LOWER_REGNUM)
996 (S390_V9_LOWER_REGNUM, S390_V10_LOWER_REGNUM)
997 (S390_V11_LOWER_REGNUM, S390_V12_LOWER_REGNUM)
998 (S390_V13_LOWER_REGNUM, S390_V14_LOWER_REGNUM)
999 (S390_V15_LOWER_REGNUM, S390_V16_REGNUM, S390_V17_REGNUM)
1000 (S390_V18_REGNUM, S390_V19_REGNUM, S390_V20_REGNUM)
1001 (S390_V21_REGNUM, S390_V22_REGNUM, S390_V23_REGNUM)
1002 (S390_V24_REGNUM, S390_V25_REGNUM, S390_V26_REGNUM)
1003 (S390_V27_REGNUM, S390_V28_REGNUM, S390_V29_REGNUM)
1004 (S390_V30_REGNUM, S390_V31_REGNUM): New macros.
1005 (S390_NUM_REGS): Adjust value.
1006 (s390_vxrs_low_regset, s390_vxrs_high_regset): Declare.
1007 (tdesc_s390_vx_linux64, tdesc_s390_tevx_linux64)
1008 (tdesc_s390x_vx_linux64, tdesc_s390x_tevx_linux64): Likewise.
1009 * NEWS: Announce S/390 vector register support.
1011 2015-03-02 Andreas Arnez <arnez@linux.vnet.ibm.com>
1013 * features/s390-tevx-linux64.xml: New file.
1014 * features/s390-vx-linux64.xml: New file.
1015 * features/s390-vx.xml: New file.
1016 * features/s390x-tevx-linux64.xml: New file.
1017 * features/s390x-vx-linux64.xml: New file.
1018 * features/Makefile (WHICH): Add s390-vx-linux64,
1019 s390x-vx-linux64, s390-tevx-linux64, and s390x-tevx-linux64.
1020 (s390-vx-linux64-expedite, s390-tevx-linux64-expedite)
1021 (s390x-vx-linux64-expedite, s390x-tevx-linux64-expedite): New
1023 * features/s390-tevx-linux64.c: New generated file.
1024 * features/s390-vx-linux64.c: Likewise.
1025 * features/s390x-tevx-linux64.c: Likewise.
1026 * features/s390x-vx-linux64.c: Likewise.
1027 * regformats/s390-tevx-linux64.dat: Likewise.
1028 * regformats/s390-vx-linux64.dat: Likewise.
1029 * regformats/s390x-tevx-linux64.dat: Likewise.
1030 * regformats/s390x-vx-linux64.dat: Likewise.
1032 2015-02-28 Doug Evans <xdje42@gmail.com>
1034 * symtab.h (struct symtab) <next>: Fix comment.
1036 2015-02-27 Simon Marchi <simon.marchi@ericsson.com>
1038 * python/python.c (python_GdbModuleDef): Rename GdbMethods to
1041 2015-02-27 Pedro Alves <palves@redhat.com>
1043 * dtrace-probe.c (dtrace_probe_ops): Make extern.
1045 2015-02-27 Pedro Alves <palves@redhat.com>
1047 * common/common-exceptions.h (exception_none): Declare.
1048 * common/common-exceptions.c (exception_none): Moved from
1050 (exceptions_state_mc_init): Use exception_none.
1051 * exceptions.c (exception_none): Move to
1052 common/common-exceptions.c.
1053 * exceptions.h (exception_none): Move to
1054 common/common-exceptions.h.
1056 2015-02-27 Pedro Alves <palves@redhat.com>
1058 * main.c (catch_command_errors, catch_command_errors_const):
1059 Remove 'mask' argument. Adjust.
1060 (captured_main): Adjust callers.
1062 2015-02-27 Pedro Alves <palves@redhat.com>
1064 * python/python-internal.h: Include "extension-priv.h".
1066 2015-02-27 Pedro Alves <palves@redhat.com>
1068 * breakpoint.h (enum print_stop_action): Move further up in the
1071 2015-02-27 Pedro Alves <palves@redhat.com>
1073 * gdbarch.sh: Include regcache.h.
1074 * gdbarch.h: Regenerate.
1076 2015-02-27 Pedro Alves <palves@redhat.com>
1078 * arm-tdep.c (decode_insn) <arm_handle_insn, thumb_handle_insn>:
1079 Remove duplicate const.
1080 * sparc-sol2-tdep.c (sparc_sol2_static_transform_name): Remove
1083 2015-02-27 Pedro Alves <palves@redhat.com>
1085 * cp-valprint.c (vtbl_ptr_name): Use EXPORTED_CONST.
1086 * guile/guile.c (extension_language_guile): Use EXPORTED_CONST.
1087 * features/feature_to_c.sh: Tag the generated xml_builtin array
1088 with extern const in C++ mode.
1090 2015-02-27 Tom Tromey <tromey@redhat.com>
1092 * minidebug.c (struct lzma_stream): Rename to ...
1093 (struct gdb_lzma_stream): ... this.
1094 (lzma_open, lzma_pread, lzma_close, lzma_stat): Adjust.
1096 2015-02-27 Pedro Alves <palves@redhat.com>
1098 * mi/mi-cmd-stack.c (mi_apply_ext_lang_frame_filter): New
1100 (mi_cmd_stack_list_locals, mi_cmd_stack_list_args)
1101 (mi_cmd_stack_list_variables): Use it.
1103 2015-02-27 Pedro Alves <palves@redhat.com>
1105 * x86-linux-nat.c (u_debugreg_offset): New function.
1106 (x86_linux_dr_get, x86_linux_dr_set): Use it.
1108 2015-02-27 Pedro Alves <palves@redhat.com>
1110 * nat/x86-dregs.h (enum target_hw_bp_type): Remove forward
1112 Include break-common.h.
1114 2015-02-27 Tom Tromey <tromey@redhat.com>
1115 Pedro Alves <palves@redhat.com>
1117 * arm-tdep.c (set_fp_model_sfunc, arm_set_abi): Use 'int' for
1118 local used to iterate over enums.
1119 * completer.c (signal_completer): Likewise.
1120 * i386-tdep.c (i386_stap_parse_special_token): Likewise.
1121 * rs6000-tdep.c (powerpc_set_vector_abi): Likewise.
1122 * tui/tui-data.c (tui_next_win, tui_prev_win): Likewise.
1123 * tui/tui-layout.c (next_layout, prev_layout): Likewise.
1124 * tui/tui-win.c (tui_refresh_all_win, tui_rehighlight_all)
1125 (tui_resize_all, tui_set_focus_command, tui_all_windows_info): Likewise.
1126 * tui-wingeneral.c (tui_refresh_all): Likewise.
1128 2015-02-27 Pedro Alves <palves@redhat.com>
1130 * target.h: Include "infrun.h".
1132 2015-02-27 Pedro Alves <palves@redhat.com>
1134 * gdb_proc_service.h: Wrap with EXTERN_C_PUSH/EXTERN_C_POP.
1136 2015-02-27 Pedro Alves <palves@redhat.com>
1138 * common/agent.h (IPA_SYM_EXPORTED_NAME): New.
1140 * common/common-defs.h (EXTERN_C_PUSH, EXTERN_C_POP): New macros.
1142 2015-02-27 Pedro Alves <palves@redhat.com>
1144 * cli-out.c (_rl_erase_entire_line): Move declaration out of
1145 cli_mld_erase_entire_line, and make it extern "C".
1146 * common/common-defs.h (EXTERN_C): New.
1147 * completer.c (_rl_completion_prefix_display_length)
1148 (_rl_print_completions_horizontally, QSFUNC): Move declarations
1149 out of gdb_display_match_list_1.
1150 (_rl_qsort_string_compare): Move declaration out of
1151 gdb_display_match_list_1, and make it extern "C".
1152 * defs.h (re_comp): Use EXTERN_C.
1153 * maint.c (_mcleanup): Move declaration out of mcleanup_wrapper,
1154 and make it extern "C".
1155 (monstartup): Move declaration out of maintenance_set_profile_cmd,
1156 and make it extern "C".
1157 (main): Move declaration out of maintenance_set_profile_cmd.
1158 * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason_string): Use
1161 2015-02-27 Pedro Alves <palves@redhat.com>
1163 * python/python.c (GdbMethods): Rename to ...
1164 (python_GdbMethods): ... this and make extern.
1165 (GdbModuleDef): Rename to ...
1166 (python_GdbModuleDef): ... this and make extern.
1168 2015-02-27 Pedro Alves <palves@redhat.com>
1170 * record-btrace.c (set_record_btrace_cmdlist)
1171 (show_record_btrace_cmdlist): Remove redefinitions.
1173 2015-02-27 Tom Tromey <tromey@redhat.com>
1174 Pedro Alves <palves@redhat.com>
1176 * dwarf2-frame.c (enum cfa_how_kind, struct
1177 dwarf2_frame_state_reg_info): Move out of struct
1179 * dwarf2read.c (struct tu_stats): Move out of struct
1181 (struct file_entry): Move out of struct line_header.
1182 (struct nextfield, struct nextfnfield, struct fnfieldlist, struct
1183 typedef_field_list): Move out of struct field_info.
1184 * gdbtypes.h (enum dynamic_prop_kind, union dynamic_prop_data):
1185 Move out of struct dynamic_prop.
1186 (union type_owner, union field_location, struct field, struct
1187 range_bounds, union type_specific): Move out of struct main_type.
1188 (struct fn_fieldlist, struct fn_field, struct typedef_field)
1189 (VOFFSET_STATIC): Move out of struct cplus_struct_type.
1190 (struct call_site_target, union call_site_parameter_u, struct
1191 call_site_parameter): Move out of struct call_site.
1192 * m32c-tdep.c (enum m32c_prologue_kind): Move out of struct
1194 (enum srcdest_kind): Move out of struct srcdest.
1195 * main.c (enum cmdarg_kind): Move out of struct cmdarg.
1196 * prologue-value.h (enum prologue_value_kind): Move out of struct
1198 * s390-linux-tdep.c (enum s390_abi_kind): Move out of struct
1200 * stabsread.c (struct nextfield, struct next_fnfieldlist): Move
1201 out of struct field_info.
1202 * symfile.h (struct other_sections): Move out of struct
1204 * symtab.c (struct symbol_cache_slot): Move out struct
1206 * target-descriptions.c (enum tdesc_type_kind): Move out of
1207 typedef struct tdesc_type.
1208 * tui/tui-data.h (enum tui_line_or_address_kind): Move out of
1209 struct tui_line_or_address.
1210 * value.c (enum internalvar_kind, union internalvar_data): Move
1211 out of struct internalvar.
1212 * xtensa-tdep.h (struct ctype_cache): Move out of struct
1215 2015-02-27 Tom Tromey <tromey@redhat.com>
1216 Pedro Alves <palves@redhat.com>
1218 Rename symbols whose names are reserved C++ keywords throughout.
1220 2015-02-27 Pedro Alves <palves@redhat.com>
1222 * Makefile.in (COMPILER): New, get it from autoconf.
1223 (COMPILE.pre, CC_LD): Use COMPILER.
1224 (CXX): Get from autoconf instead.
1225 (CXX_FOR_TARGET): Default to g++ instead of gcc.
1226 * acinclude.m4: Include build-with-cxx.m4.
1227 * build-with-cxx.m4: New file.
1228 * configure.ac: Call AC_PROG_CXX and GDB_AC_BUILD_WITH_CXX.
1229 Disable -Werror by default if building in C++ mode.
1230 (build_warnings): Add -Wno-sign-compare, -Wno-write-strings and
1231 -Wno-narrowing in C++ mode. Only enable -Wpointer-sign in C mode.
1232 Run supported-warning-flags tests with the C++ compiler.
1233 Save/restore CXXFLAGS too.
1234 * configure: Regenerate.
1236 2015-02-27 Pedro Alves <palves@redhat.com>
1238 * libiberty.m4: New file.
1239 * acinclude.m4: Include libiberty.m4.
1240 * configure.ac: Call libiberty_INIT.
1241 * config.in, configure: Regenerate.
1243 2015-02-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
1245 * s390-linux-tdep.c (s390_gcc_target_options): Not just handle
1246 31-bit targets, but 64-bit targets as well.
1247 (s390_gnu_triplet_regexp): New function.
1248 (s390_gdbarch_init): Set the gcc_target_options gdbarch method for
1249 64-bit targets as well. Set the gnu_triplet_regexp gdbarch
1252 2015-02-27 Jon TURNEY <jon.turney@dronecode.org.uk> (tiny patch)
1254 * windows-nat.c (CONTEXT_DEBUGGER): Remove.
1255 (CONTEXT_DEBUGGER_DR): Add CONTEXT_SEGMENTS. Incorporate flags
1256 from CONTEXT_DEBUGGER.
1258 2015-02-26 Doug Evans <dje@google.com>
1260 * gdbtypes.c (internal_type_vptr_fieldno): Add missing call to
1262 (set_type_vptr_fieldno): Ditto.
1263 (internal_type_vptr_basetype, set_type_vptr_basetype): Ditto.
1264 * gnu-v3-abi.c (gnuv3_dynamic_class): Ditto.
1266 2015-02-26 Pedro Alves <palves@redhat.com>
1268 * auto-load.h (file_is_auto_load_safe): Add ATTRIBUTE_PRINTF.
1269 * complaints.c (vcomplaint): Pass argument FMT directly to
1270 printf-like functions instead of complaint->fmt.
1271 * ctf.c (ctf_save_write_metadata): Add ATTRIBUTE_PRINTF.
1272 * darwin-nat.c (inferior_debug): Add ATTRIBUTE_PRINTF.
1273 * compile/compile-loc2c.c (pushf, unary, binary): Add
1275 (do_compile_dwarf_expr_to_c): Pass string literal as format string
1277 (BINARY): Pass string literal as format string to 'binary'.
1278 * compile/compile-object-load.c (link_callbacks_einfo): Add
1280 * guile/guile-internal.h (gdbscm_printf): Add ATTRIBUTE_PRINTF.
1282 2015-02-26 Pedro Alves <palves@redhat.com>
1284 * windows-termcap.c: Rename to ...
1285 * stub-termcap.c: ... this. Adjust header line.
1286 * Makefile.in (SFILES): Refer to stub-termcap.c instead of
1288 * configure: Regenerate.
1289 * configure.ac: Refer to stub-termcap.o instead of
1291 * gdb_curses.h: Mention stub-termcap.c instead of
1294 2015-02-26 Jan Kratochvil <jan.kratochvil@redhat.com>
1296 * compile/compile-c-symbols.c (convert_one_symbol, convert_symbol_bmsym)
1297 (gcc_symbol_address): Call gnu_ifunc_resolve_addr.
1299 2015-02-26 Antoine Tremblay <antoine.tremblay@ericsson.com>
1301 * gdb/infcmd.c (print_return_value): use type_to_string to print type.
1303 2015-02-26 Jan Kratochvil <jan.kratochvil@redhat.com>
1305 * elfread.c (elf_read_minimal_symbols): Use bfd_alloc for
1306 bfd_canonicalize_symtab.
1308 2015-02-25 John Baldwin <jhb@FreeBSD.org>
1310 * amd64fbsd-nat.c: Include sys/user.h.
1311 (_initialize_amd64fbsd_nat): Use the KERN_PROC_SIGTRAMP sysctl
1312 instead of KERN_PS_STRINGS to locate the signal trampoline.
1313 * i386fbsd-nat.c: Include sys/user.h.
1314 (_initialize_i386fbsd_nat): Use the KERN_PROC_SIGTRAMP sysctl
1315 instead of KERN_PS_STRINGS to locate the signal trampoline.
1316 * amd64fbsd-tdep.c (amd64fbsd_sigtramp_code): New.
1317 (amd64fbsd_sigtramp_p): New.
1318 (amd64fbsd_sigtramp_start_addr, amd64fbsd_sigtramp_end_addr): No
1319 longer set default values.
1320 (amd64fbsd_init_abi): Set "sigtramp_p" to "amd64fbsd_sigtramp_p".
1321 * i386fbsd-tdep.c (i386fbsd_sigtramp_start)
1322 (i386fbsd_sigtramp_middle, i386fbsd_sigtramp_end)
1323 (i386fbsd_freebsd4_sigtramp_start)
1324 (i386fbsd_freebsd4_sigtramp_middle)
1325 (i386fbsd_freebsd4_sigtramp_end, i386fbsd_osigtramp_start)
1326 (i386fbsd_osigtramp_middle, i386fbsd_osigtramp_end): New.
1327 (i386fbsd_sigtramp_p): New.
1328 (i386fbsd_sigtramp_start_addr, i386fbsd_sigtramp_end_addr): No
1329 longer set default values.
1330 (i386fbsd_init_abi): Set "sigtramp_p" to "i386fbsd_sigtramp_p".
1332 2015-02-25 John Baldwin <jhb@freebsd.org>
1334 * amd64fbsd-tdep.c (amd64fbsd_sigcontext_addr): Use
1335 get_frame_register instead of frame_unwind_register_unsigned.
1337 2015-02-26 Jan Kratochvil <jan.kratochvil@redhat.com>
1340 * compile/compile-c-support.c (c_compute_program): Change // comment.
1341 * compile/compile-object-load.c (setup_sections): Change // comment.
1343 2015-02-26 Joel Brobecker <brobecker@adacore.com>
1346 * iq2000-tdep.c (iq2000_frame_cache): Delete C++-style comment.
1348 2015-02-23 Pedro Alves <palves@redhat.com>
1350 * remote.c (skip_to_semicolon): New function.
1351 (remote_parse_stop_reply) <T stop reply>: Use it. Don't
1352 special case the stop reasons that look like hex numbers
1353 upfront. Instead handle real register numbers after matching
1354 all the known stop reasons.
1356 2015-02-21 Doug Evans <dje@google.com>
1358 PR c++/17976, symtab/17821
1359 * cp-namespace.c (cp_search_static_and_baseclasses): New parameter
1360 is_in_anonymous. All callers updated.
1361 (find_symbol_in_baseclass): Ditto.
1362 (cp_lookup_nested_symbol_1): Ditto. Don't search all static blocks
1363 for symbols in an anonymous namespace.
1364 * dwarf2read.c (namespace_name): Don't call dwarf2_name, fetch
1365 DW_AT_name directly.
1366 (dwarf2_name): Convert missing namespace name to
1367 CP_ANONYMOUS_NAMESPACE_STR.
1369 2015-02-20 Pedro Alves <palves@redhat.com>
1371 * linux-nat.c (linux_handle_extended_wait): Call
1372 thread_db_notice_clone whenever a new clone LWP is detected.
1373 (linux_stop_and_wait_all_lwps, linux_unstop_all_lwps): New
1375 * linux-nat.h (thread_db_attach_lwp): Delete declaration.
1376 (thread_db_notice_clone, linux_stop_and_wait_all_lwps)
1377 (linux_unstop_all_lwps): Declare.
1378 * linux-thread-db.c (struct thread_get_info_inout): Delete.
1379 (thread_get_info_callback): Delete.
1380 (thread_from_lwp): Use td_thr_get_info and record_thread.
1381 (thread_db_attach_lwp): Delete.
1382 (thread_db_notice_clone): New function.
1383 (try_thread_db_load_1): If /proc is mounted and shows the
1384 process'es task list, walk over all LWPs and call thread_from_lwp
1385 instead of relying on td_ta_thr_iter.
1386 (attach_thread): Don't call check_thread_signals here. Split the
1387 tail part of the function (which adds the thread to the core GDB
1389 (record_thread): ... this function. Call check_thread_signals
1391 (thread_db_wait): Don't call thread_db_find_new_threads_1. Always
1392 call thread_from_lwp.
1393 (thread_db_update_thread_list): Rename to ...
1394 (thread_db_update_thread_list_org): ... this.
1395 (thread_db_update_thread_list): New function.
1396 (thread_db_find_thread_from_tid): Delete.
1397 (thread_db_get_ada_task_ptid): Simplify.
1398 * nat/linux-procfs.c: Include <sys/stat.h>.
1399 (linux_proc_task_list_dir_exists): New function.
1400 * nat/linux-procfs.h (linux_proc_task_list_dir_exists): Declare.
1402 2015-02-20 Pedro Alves <palves@redhat.com>
1404 * linux-nat.c (lin_lwp_attach_lwp): No longer special case the
1405 main LWP. Handle the case of waitpid returning 0 if we're already
1406 attached to the LWP. Don't set the LWP's last_resume_kind to
1407 resume_stop if we already knew about the LWP.
1408 (linux_nat_filter_event): Add debug logs.
1410 2015-02-20 Pedro Alves <palves@redhat.com>
1412 * target.h (forward_target_decr_pc_after_break): Delete
1415 2015-02-20 Pedro Alves <palves@redhat.com>
1418 * linux-thread-db.c (thread_get_info_callback): Return early if
1419 the thread's lwp id is -1.
1421 2015-02-20 Joel Brobecker <brobecker@adacore.com>
1425 2015-02-19 Steve Ellcey <sellcey@imgtec.com>
1427 * dtrace-probe.c (dtrace_process_dof_probe): Initialize arg.expr.
1428 (dtrace_get_probes) Change type of variable 'dof'.
1430 2015-02-19 Antoine Tremblay <antoine.tremblay@ericsson.com>
1432 PR breakpoints/16812
1433 * linux-nat.c (linux_nat_filter_event): Report SIGTRAP,SIGILL,SIGSEGV.
1434 * nat/linux-ptrace.c (linux_wstatus_maybe_breakpoint): Add.
1435 * nat/linux-ptrace.h: Add linux_wstatus_maybe_breakpoint.
1437 2015-02-19 David Taylor <dtaylor@emc.com>
1439 * common/ax.def (setv): Fix consumed entry in setv DEFOP.
1441 2015-02-18 Patrick Palka <patrick@parcs.ath.cx>
1443 * tui/tui-io.c (tui_handle_resize_during_io): Remove this
1445 (tui_putc): Don't call tui_handle_resize_during_io.
1446 (tui_getc): Likewise.
1447 (tui_mld_getc): Likewise.
1448 * tui/tui-win.c: Include event-loop.h and tui/tui-io.h.
1449 (tui_sigwinch_token): New static variable.
1450 (tui_initialize_win): Adjust documentation. Set
1452 (tui_async_resize_screen): New asynchronous callback.
1453 (tui_sigwinch_handler): Adjust documentation. Asynchronously
1454 invoke tui_async_resize_screen.
1456 2015-02-18 Jose E. Marchesi <jose.marchesi@oracle.com>
1458 * configure: Regenerated.
1459 * configure.ac: Use GDB_AC_TRANSFORM.
1460 * Makefile.in (aclocal_m4_deps): Added transform.m4.
1461 * acinclude.m4: sinclude transform.m4.
1462 * transform.m4: New file.
1463 (GDB_AC_TRANSFORM): New macro.
1465 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
1467 * NEWS: Announce the support for DTrace SDT probes.
1469 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
1471 * amd64-linux-tdep.c: Include "parser-defs.h" and "user-regs.h".
1472 (amd64_dtrace_parse_probe_argument): New function.
1473 (amd64_dtrace_probe_is_enabled): Likewise.
1474 (amd64_dtrace_enable_probe): Likewise.
1475 (amd64_dtrace_disable_probe): Likewise.
1476 (amd64_linux_init_abi): Register the
1477 `gdbarch_dtrace_probe_argument', `gdbarch_dtrace_enable_probe',
1478 `gdbarch_dtrace_disable_probe' and
1479 `gdbarch_dtrace_probe_is_enabled' hooks.
1480 (amd64_dtrace_disabled_probe_sequence_1): New constant.
1481 (amd64_dtrace_disabled_probe_sequence_2): Likewise.
1482 (amd64_dtrace_enable_probe_sequence): Likewise.
1483 (amd64_dtrace_disable_probe_sequence): Likewise.
1485 2015-01-17 Jose E. Marchesi <jose.marchesi@oracle.com>
1487 * breakpoint.c (BREAK_ARGS_HELP): Help string updated to mention
1488 the -probe-dtrace new vpossible value for PROBE_MODIFIER.
1489 * configure.ac (CONFIG_OBS): dtrace-probe.o added if BFD can
1491 * Makefile.in (SFILES): dtrace-probe.c added.
1492 * configure: Regenerate.
1493 * dtrace-probe.c: New file.
1494 (SHT_SUNW_dof): New constant.
1495 (dtrace_probe_type): New enum.
1496 (dtrace_probe_arg): New struct.
1497 (dtrace_probe_arg_s): New typedef.
1498 (struct dtrace_probe_enabler): New struct.
1499 (dtrace_probe_enabler_s): New typedef.
1500 (dtrace_probe): New struct.
1501 (dtrace_probe_is_linespec): New function.
1502 (dtrace_dof_sect_type): New enum.
1503 (dtrace_dof_dofh_ident): Likewise.
1504 (dtrace_dof_encoding): Likewise.
1505 (DTRACE_DOF_ENCODE_LSB): Likewise.
1506 (DTRACE_DOF_ENCODE_MSB): Likewise.
1507 (dtrace_dof_hdr): New struct.
1508 (dtrace_dof_sect): Likewise.
1509 (dtrace_dof_provider): Likewise.
1510 (dtrace_dof_probe): Likewise.
1511 (DOF_UINT): New macro.
1512 (DTRACE_DOF_PTR): Likewise.
1513 (DTRACE_DOF_SECT): Likewise.
1514 (dtrace_process_dof_probe): New function.
1515 (dtrace_process_dof): Likewise.
1516 (dtrace_build_arg_exprs): Likewise.
1517 (dtrace_get_arg): Likewise.
1518 (dtrace_get_probes): Likewise.
1519 (dtrace_get_probe_argument_count): Likewise.
1520 (dtrace_can_evaluate_probe_arguments): Likewise.
1521 (dtrace_evaluate_probe_argument): Likewise.
1522 (dtrace_compile_to_ax): Likewise.
1523 (dtrace_probe_destroy): Likewise.
1524 (dtrace_gen_info_probes_table_header): Likewise.
1525 (dtrace_gen_info_probes_table_values): Likewise.
1526 (dtrace_probe_is_enabled): Likewise.
1527 (dtrace_probe_ops): New variable.
1528 (info_probes_dtrace_command): New function.
1529 (_initialize_dtrace_probe): Likewise.
1530 (dtrace_type_name): Likewise.
1532 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
1534 * gdbarch.sh (dtrace_parse_probe_argument): New.
1535 (dtrace_probe_is_enabled): Likewise.
1536 (dtrace_enable_probe): Likewise.
1537 (dtrace_disable_probe): Likewise.
1538 * gdbarch.c: Regenerate.
1539 * gdbarch.h: Regenerate.
1541 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
1543 * stap-probe.c (stap_probe_ops): Add NULLs in the static
1544 stap_probe_ops for `enable_probe' and `disable_probe'.
1545 * probe.c (enable_probes_command): New function.
1546 (disable_probes_command): Likewise.
1547 (_initialize_probe): Define the cli commands `enable probe' and
1549 (parse_probe_linespec): New function.
1550 (info_probes_for_ops): Use parse_probe_linespec.
1551 * probe.h (probe_ops): New hooks `enable_probe' and
1554 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
1556 * probe.c (compute_probe_arg): Moved from stap-probe.c
1557 (compile_probe_arg): Likewise.
1558 (probe_funcs): Likewise.
1559 * stap-probe.c (compute_probe_arg): Moved to probe.c.
1560 (compile_probe_arg): Likewise.
1561 (probe_funcs): Likewise.
1563 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
1565 * probe.c (print_ui_out_not_applicables): New function.
1566 (exists_probe_with_pops): Likewise.
1567 (info_probes_for_ops): Do not include column headers for probe
1568 types for which no probe has been actually found on any object.
1569 Also invoke `print_ui_out_not_applicables' in order to match the
1570 column rows with the header when probes of several types are
1572 Print the "Type" column.
1573 * probe.h (probe_ops): Added a new probe operation `type_name'.
1574 * stap-probe.c (stap_probe_ops): Add `stap_type_name'.
1575 (stap_type_name): New function.
1577 2015-02-17 Patrick Palka <patrick@parcs.ath.cx>
1579 * tui/tui-io.c (tui_getc): Don't call key_is_command_char.
1580 (key_is_command_char): Delete.
1582 2015-02-17 Pedro Alves <palves@redhat.com>
1584 * tui/tui.c (tui_enable): Resize windows before anything
1585 might show a window.
1587 2015-02-17 Max Ostapenko <m.ostapenko@partner.samsung.com>
1590 * aarch64-linux-nat.c: Don't include features/aarch64.c anymore.
1591 (aarch64_linux_read_description): Remove initialize_tdesc_aarch64
1593 * aarch64-tdep.h (tdesc_aarch64): Declare.
1595 2015-02-12 Mark Wielaard <mjw@redhat.com>
1597 * contrib/ari/gdb_ari.sh: Remove checks for "true" and "false".
1599 2015-02-13 Doug Evans <dje@google.com>
1601 * cp-namespace.c (cp_basic_lookup_symbol): Rename parameter
1602 anonymous_namespace to is_in_anonymous for consistency with the rest
1604 (cp_lookup_bare_symbol): Fix typo in comment.
1605 (cp_search_static_and_baseclasses): Ditto.
1606 (search_symbol_list): Use vertical space in comment better.
1607 (reset_directive_searched): Ditto. Fix typo.
1608 (cp_lookup_nested_symbol_1): Clarify contents of NESTED_NAME parameter.
1610 2015-02-13 Yao Qi <yao.qi@arm.com>
1612 * MAINTAINERS: Update my email address.
1614 2015-02-12 Doug Evans <dje@google.com>
1616 * symtab.c (completion_list_add_name): Fix memory leak.
1618 2015-02-12 Doug Evans <dje@google.com>
1620 * completer.c (complete_line): Remove incorrect comment.
1622 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
1624 * python/py-framefilter.c (py_print_single_arg, enumerate_locals)
1625 (py_print_frame): Use RETURN_MASK_ERROR.
1627 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
1629 * python/py-framefilter.c (py_print_frame): Mention RETURN_QUIT in
1630 function comment. Wrap all function that can throw in cleanups.
1631 (gdbpy_apply_frame_filter): Wrap all function that can throw in
1634 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
1636 * python/py-framefilter.c (py_print_frame): Substitute goto error.
1637 Remove the error label.
1639 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
1641 * python/py-framefilter.c (py_print_frame): Put conditional code paths
1642 with goto first, indent the former else codepath left. Put variable
1643 'elided' to a new inner block.
1645 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
1647 * python/py-framefilter.c (py_print_frame): Whitespacing fixes.
1649 2015-02-11 Pedro Alves <palves@redhat.com>
1651 * xcoffread.c (within_function): Delete.
1653 2015-02-11 Tom Tromey <tromey@redhat.com>
1654 Pedro Alves <palves@redhat.com>
1656 * breakpoint.c (base_breakpoint_ops): Delete.
1657 * dwarf2loc.c (dwarf_expr_ctx_funcs): Make extern.
1658 * elfread.c (elf_sym_fns_gdb_index, elf_sym_fns_lazy_psyms): Make extern.
1659 * guile/guile.c (guile_extension_script_ops, guile_extension_ops): Make extern.
1660 * ppcnbsd-tdep.c (ppcnbsd2_sigtramp): Make extern.
1661 * python/py-arch.c (arch_object_type): Make extern.
1662 * python/py-block.c (block_syms_iterator_object_type): Make extern.
1663 * python/py-bpevent.c (breakpoint_event_object_type): Make extern.
1664 * python/py-cmd.c (cmdpy_object_type): Make extern.
1665 * python/py-continueevent.c (continue_event_object_type)
1666 * python/py-event.h (GDBPY_NEW_EVENT_TYPE): Remove 'qual'
1667 parameter. Update all callers.
1668 * python/py-evtregistry.c (eventregistry_object_type): Make extern.
1669 * python/py-exitedevent.c (exited_event_object_type): Make extern.
1670 * python/py-finishbreakpoint.c (finish_breakpoint_object_type): Make extern.
1671 * python/py-function.c (fnpy_object_type): Make extern.
1672 * python/py-inferior.c (inferior_object_type, membuf_object_type): Make extern.
1673 * python/py-infevents.c (call_pre_event_object_type)
1674 (inferior_call_post_event_object_type).
1675 (memory_changed_event_object_type): Make extern.
1676 * python/py-infthread.c (thread_object_type): Make extern.
1677 * python/py-lazy-string.c (lazy_string_object_type): Make extern.
1678 * python/py-linetable.c (linetable_entry_object_type)
1679 (linetable_object_type, ltpy_iterator_object_type): Make extern.
1680 * python/py-newobjfileevent.c (new_objfile_event_object_type)
1681 (clear_objfiles_event_object_type): Make extern.
1682 * python/py-objfile.c (objfile_object_type): Make extern.
1683 * python/py-param.c (parmpy_object_type): Make extern.
1684 * python/py-progspace.c (pspace_object_type): Make extern.
1685 * python/py-signalevent.c (signal_event_object_type): Make extern.
1686 * python/py-symtab.c (symtab_object_type, sal_object_type): Make extern.
1687 * python/py-type.c (type_object_type, field_object_type)
1688 (type_iterator_object_type): Make extern.
1689 * python/python.c (python_extension_script_ops)
1690 (python_extension_ops): Make extern.
1691 * stap-probe.c (stap_probe_ops): Make extern.
1693 2015-02-11 Pedro Alves <pedro@codesourcery.com>
1695 * infrun.c (adjust_pc_after_break): Don't adjust the PC just
1696 because the event thread is not the current thread.
1698 2015-02-11 Doug Evans <xdje42@gmail.com>
1700 * gdbtypes.c (internal_type_self_type): If TYPE_SPECIFIC_FIELD hasn't
1701 been initialized yet, return NULL.
1703 2015-02-11 Doug Evans <dje@google.com>
1705 * symfile.h (new_symfile_objfile): Delete.
1706 * symfile.c (finish_new_objfile): Renamed from new_symfile_objfile.
1707 All callers updated.
1709 2015-02-11 Patrick Palka <patrick@parcs.ath.cx>
1711 * tui/tui-io.c (tui_handle_resize_during_io): Call
1712 tui_update_gdb_sizes() after resizing the screen.
1713 * tui/tui.c (tui_enable): Resize the terminal before
1714 calling tui_update_gdb_sizes().
1716 2015-02-11 Patrick Palka <patrick@parcs.ath.cx>
1718 * tui/tui-io.c (tui_getc): Move cursor to the end of the command
1719 line before printing a newline.
1721 2015-02-11 Mark Wielaard <mjw@redhat.com>
1723 * utils.c (producer_is_gcc): Return true or false.
1725 2015-02-10 Mark Wielaard <mjw@redhat.com>
1727 * utils.h (producer_is_gcc): Change return type to bool. Add major
1729 * utils.c (producer_is_gcc): Likewise.
1730 (producer_is_gcc_ge_4): Adjust producer_is_gcc call.
1731 * dwarf2read.c (check_producer): Likewise.
1733 2015-02-10 Pedro Alves <palves@redhat.com>
1735 * infrun.c (displaced_step_fixup): Switch to the event thread
1736 before calling gdbarch_displaced_step_fixup.
1738 2015-02-10 Antoine Tremblay <antoine.tremblay@ericsson.com>
1740 * MAINTAINERS (Write After Approval): Add Antoine Tremblay.
1742 2015-02-10 Simon Marchi <simon.marchi@ericsson.com>
1744 * ada-varobj.c (ada_name_of_child): Constify parent.
1745 (ada_path_expr_of_child): Same.
1746 (ada_value_of_child): Same.
1747 (ada_type_of_child): Same.
1748 * c-varobj.c (c_is_path_expr_parent): Same.
1749 (c_describe_child): Same.
1750 (c_name_of_child): Same.
1751 (c_value_of_child): Same.
1752 (c_type_of_child): Same.
1753 (cplus_number_of_children): Same.
1754 (cplus_describe_child): Constify var.
1755 (cplus_name_of_child): Constify parent.
1756 (cplus_value_of_child): Same.
1757 (cplus_type_of_child): Same.
1758 * jv-varobj.c (java_name_of_child): Same.
1759 (java_value_of_child): Same.
1760 (java_type_of_child): Same.
1761 * varobj.c (value_of_child): Same.
1762 (varobj_default_is_path_expr_parent): Constify var, parent and return
1764 (varobj_get_path_expr): Constify var, modify path_expr through
1766 (install_new_value): Constify parent.
1767 (value_of_child): Constify parent.
1768 * varobj.h (struct varobj): Constify parent.
1769 (struct lang_varobj_ops): Constify name_of_child, value_of_child and
1771 (varobj_get_path_expr): Constify var.
1772 (varobj_get_path_expr_parent): Constify var and return value.
1774 2015-02-10 Luis Machado <lgustavo@codesourcery.com>
1776 * arm-tdep.c (arm_prologue_unwind_stop_reason): New function.
1777 (arm_prologue_this_id): Move PC and SP limit checks to
1778 arm_prologue_unwind_stop_reason.
1779 (arm_prologue_unwind) <stop_reason> : Set to
1780 arm_prologue_unwind_stop_reason.
1782 2015-02-09 Mark Wielaard <mjw@redhat.com>
1784 * dwarf2read.c (set_cu_language): Recognize DW_LANG_Fortran03 and
1785 DW_LANG_Fortran08 as language_fortran.
1787 2015-02-09 Sergio Durigan Junior <sergiodj@redhat.com>
1790 * gdb/remote.c (remote_parse_stop_reply): Fix wrong comparison
1791 of pointer against char.
1793 2015-02-09 Mark Wielaard <mjw@redhat.com>
1795 * c-typeprint.c (cp_type_print_method_args): Handle '_Atomic'.
1796 (c_type_print_modifier): Likewise.
1797 * dwarf2read.c (read_tag_atomic_type): New function.
1798 (read_type_die_1): Handle DW_TAG_atomic_type.
1799 * gdbtypes.c (make_atomic_type): New function.
1800 (recursive_dump_type): Handle TYPE_ATOMIC.
1801 * gdbtypes.h (enum type_flag_values): Renumber.
1802 (enum type_instance_flag_value): Add TYPE_INSTANCE_FLAG_ATOMIC.
1803 (TYPE_ATOMIC): New macro.
1804 (make_atomic_type): Declare.
1806 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
1808 * btrace.c (ftrace_find_call): Skip gaps.
1809 (ftrace_new_function): Initialize level.
1810 (ftrace_new_call, ftrace_new_tailcall, ftrace_new_return)
1811 (ftrace_new_switch): Update
1813 (ftrace_new_gap): New.
1814 (ftrace_update_function): Create new function after gap.
1815 (btrace_compute_ftrace_bts): Create gap on error.
1816 (btrace_stitch_bts): Update parameters. Clear trace if it
1818 (btrace_stitch_trace): Update parameters. Update callers.
1819 (btrace_clear): Reset the number of gaps.
1820 (btrace_insn_get): Return NULL if the iterator points to a gap.
1821 (btrace_insn_number): Return zero if the iterator points to a gap.
1822 (btrace_insn_end): Allow gaps at the end.
1823 (btrace_insn_next, btrace_insn_prev, btrace_insn_cmp): Handle gaps.
1824 (btrace_find_insn_by_number): Assert that the found iterator does
1826 (btrace_call_next, btrace_call_prev): Assert that the last function
1828 * btrace.h (btrace_bts_error): New.
1829 (btrace_function): Update comment.
1830 (btrace_function) <insn, insn_offset, number>: Update comment.
1831 (btrace_function) <errcode>: New.
1832 (btrace_thread_info) <ngaps>: New.
1833 (btrace_thread_info) <replay>: Update comment.
1834 (btrace_insn_get): Update comment.
1835 * record-btrace.c (btrace_ui_out_decode_error): New.
1836 (record_btrace_info): Print number of gaps.
1837 (btrace_insn_history, btrace_call_history): Call
1838 btrace_ui_out_decode_error for gaps.
1839 (record_btrace_step_thread, record_btrace_start_replaying): Skip gaps.
1841 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
1843 * common/btrace-common.h (btrace_cpu_vendor, btrace_cpu): New.
1844 * nat/linux-btrace.c: (btrace_this_cpu): New.
1845 (cpu_supports_bts): Call btrace_this_cpu.
1846 (intel_supports_bts): Add cpu parameter.
1848 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
1850 * btrace.h (btrace_insn_class): New.
1851 (btrace_insn) <size, iclass>: New.
1852 * btrace.c (ftrace_find_call): Update parameters. Update users.
1853 Use instruction classification.
1854 (ftrace_new_return): Update parameters. Update users.
1855 (ftrace_update_function): Update parameters. Update users. Use
1856 instruction classification.
1857 (ftrace_update_insns): Update parameters. Update users.
1858 (ftrace_classify_insn): New.
1859 (btrace_compute_ftrace_bts): Fill in new btrace_insn fields. Add
1860 TRY_CATCH around call to gdb_insn_length.
1862 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
1864 * btrace.c (btrace_compute_ftrace_bts, btrace_compute_ftrace):
1865 Update parameters. Update users.
1867 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
1869 * btrace.c (parse_xml_btrace_conf_bts): Add size.
1870 (btrace_conf_bts_attributes): New.
1871 (btrace_conf_children): Add attributes.
1872 * common/btrace-common.h (btrace_config_bts): New.
1873 (btrace_config)<bts>: New.
1874 (btrace_config): Update comment.
1875 * nat/linux-btrace.c (linux_enable_btrace, linux_enable_bts):
1877 * features/btrace-conf.dtd: Increment version. Add size
1878 attribute to bts element.
1879 * record-btrace.c (set_record_btrace_bts_cmdlist,
1880 show_record_btrace_bts_cmdlist): New.
1881 (record_btrace_adjust_size, record_btrace_print_bts_conf,
1882 record_btrace_print_conf, cmd_set_record_btrace_bts,
1883 cmd_show_record_btrace_bts): New.
1884 (record_btrace_info): Call record_btrace_print_conf.
1885 (_initialize_record_btrace): Add commands.
1886 * remote.c: Add PACKET_Qbtrace_conf_bts_size enum.
1887 (remote_protocol_features): Add Qbtrace-conf:bts:size packet.
1888 (btrace_sync_conf): Synchronize bts size.
1889 (_initialize_remote): Add Qbtrace-conf:bts:size packet.
1890 * NEWS: Announce new commands and new packets.
1892 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
1894 * Makefile.in (XMLFILES): Add btrace-conf.dtd.
1895 * x86-linux-nat.c (x86_linux_enable_btrace): Update parameters.
1896 (x86_linux_btrace_conf): New.
1897 (x86_linux_create_target): Initialize to_btrace_conf.
1898 * nat/linux-btrace.c (linux_enable_btrace): Update parameters.
1899 Check format. Split into this and ...
1900 (linux_enable_bts): ... this.
1901 (linux_btrace_conf): New.
1902 (perf_event_skip_record): Renamed into ...
1903 (perf_event_skip_bts_record): ... this. Updated users.
1904 (linux_disable_btrace): Split into this and ...
1905 (linux_disable_bts): ... this.
1906 (linux_read_btrace): Check format.
1907 * nat/linux-btrace.h (linux_enable_btrace): Update parameters.
1908 (linux_btrace_conf): New.
1909 (btrace_target_info)<ptid>: Moved.
1910 (btrace_target_info)<conf>: New.
1911 (btrace_target_info): Split into this and ...
1912 (btrace_tinfo_bts): ... this. Updated users.
1913 * btrace.c (btrace_enable): Update parameters.
1914 (btrace_conf, parse_xml_btrace_conf_bts, parse_xml_btrace_conf)
1915 (btrace_conf_children, btrace_conf_attributes)
1916 (btrace_conf_elements): New.
1917 * btrace.h (btrace_enable): Update parameters.
1918 (btrace_conf, parse_xml_btrace_conf): New.
1919 * common/btrace-common.h (btrace_config): New.
1920 * feature/btrace-conf.dtd: New.
1921 * record-btrace.c (record_btrace_conf): New.
1922 (record_btrace_cmdlist): New.
1923 (record_btrace_enable_warn, record_btrace_open): Pass
1924 &record_btrace_conf.
1925 (record_btrace_info): Print recording format.
1926 (cmd_record_btrace_bts_start): New.
1927 (cmd_record_btrace_start): Call cmd_record_btrace_bts_start.
1928 (_initialize_record_btrace): Add "record btrace bts" subcommand.
1929 Add "record bts" alias command.
1930 * remote.c (remote_state)<btrace_config>: New.
1931 (remote_btrace_reset, PACKET_qXfer_btrace_conf): New.
1932 (remote_protocol_features): Add qXfer:btrace-conf:read.
1933 (remote_open_1): Call remote_btrace_reset.
1934 (remote_xfer_partial): Handle TARGET_OBJECT_BTRACE_CONF.
1935 (btrace_target_info)<conf>: New.
1936 (btrace_sync_conf, btrace_read_config): New.
1937 (remote_enable_btrace): Update parameters. Call btrace_sync_conf and
1939 (remote_btrace_conf): New.
1940 (init_remote_ops): Initialize to_btrace_conf.
1941 (_initialize_remote): Add qXfer:btrace-conf packet.
1942 * target.c (target_enable_btrace): Update parameters.
1943 (target_btrace_conf): New.
1944 * target.h (target_enable_btrace): Update parameters.
1945 (target_btrace_conf): New.
1946 (target_object)<TARGET_OBJECT_BTRACE_CONF>: New.
1947 (target_ops)<to_enable_btrace>: Update parameters and comment.
1948 (target_ops)<to_btrace_conf>: New.
1949 * target-delegates: Regenerate.
1950 * target-debug.h (target_debug_print_const_struct_btrace_config_p)
1951 (target_debug_print_const_struct_btrace_target_info_p): New.
1952 * NEWS: Announce new command and new packet.
1954 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
1956 * nat/linux-btrace.h (perf_event_buffer): New.
1957 (btrace_target_info) <buffer, size, data_head>: Replace with ...
1959 * nat/linux-btrace.c (perf_event_header, perf_event_mmap_size)
1960 (perf_event_buffer_size, perf_event_buffer_begin)
1961 (perf_event_buffer_end, linux_btrace_has_changed): Removed.
1963 (perf_event_new_data): New.
1965 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
1967 * btrace.c (btrace_enable): Pass BTRACE_FORMAT_BTS.
1968 * record-btrace.c (record_btrace_open): Remove call to
1969 target_supports_btrace.
1970 * remote.c (remote_supports_btrace): Update parameters.
1971 * target.c (target_supports_btrace): Update parameters.
1972 * target.h (to_supports_btrace, target_supports_btrace): Update
1974 * target-delegates.c: Regenerate.
1975 * target-debug.h (target_debug_print_enum_btrace_format): New.
1976 * nat/linux-btrace.c
1977 (kernel_supports_btrace): Rename into ...
1978 (kernel_supports_bts): ... this. Update users. Update warning text.
1979 (intel_supports_btrace): Rename into ...
1980 (intel_supports_bts): ... this. Update users.
1981 (cpu_supports_btrace): Rename into ...
1982 (cpu_supports_bts): ... this. Update users.
1983 (linux_supports_btrace): Update parameters. Split into this and ...
1984 (linux_supports_bts): ... this.
1985 * nat/linux-btrace.h (linux_supports_btrace): Update parameters.
1987 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
1989 * Makefile.in (SFILES): Add common/btrace-common.c.
1990 (COMMON_OBS): Add common/btrace-common.o.
1991 (btrace-common.o): Add build rules.
1992 * btrace.c (parse_xml_btrace): Update parameters.
1993 (parse_xml_btrace_block): Set format field.
1994 (btrace_add_pc, btrace_fetch): Use struct btrace_data.
1995 (do_btrace_data_cleanup, make_cleanup_btrace_data): New.
1996 (btrace_compute_ftrace): Split into this and...
1997 (btrace_compute_ftrace_bts): ...this.
1998 (btrace_stitch_trace): Split into this and...
1999 (btrace_stitch_bts): ...this.
2000 * btrace.h (parse_xml_btrace): Update parameters.
2001 (make_cleanup_btrace_data): New.
2002 * common/btrace-common.c: New.
2003 * common/btrace-common.h: Include common-defs.h.
2004 (btrace_block_s): Update comment.
2005 (btrace_format): New.
2006 (btrace_format_string): New.
2007 (btrace_data_bts): New.
2009 (btrace_data_init, btrace_data_fini, btrace_data_empty): New.
2010 * remote.c (remote_read_btrace): Update parameters.
2011 * target.c (target_read_btrace): Update parameters.
2012 * target.h (target_read_btrace): Update parameters.
2013 (target_ops)<to_read_btrace>: Update parameters.
2014 * x86-linux-nat.c (x86_linux_read_btrace): Update parameters.
2015 * target-delegates.c: Regenerate.
2016 * target-debug (target_debug_print_struct_btrace_data_p): New.
2017 * nat/linux-btrace.c (linux_read_btrace): Split into this and...
2018 (linux_read_bts): ...this.
2019 * nat/linux-btrace.h (linux_read_btrace): Update parameters.
2021 2015-02-06 Doug Evans <dje@google.com>
2023 * remote-m32r-sdi.c: Include symfile.h.
2025 2015-02-06 Doug Evans <dje@google.com>
2027 * symtab.h (clear_symtab_users, deduce_language_from_filename): Move
2028 * symfile.h (clear_symtab_users, deduce_language_from_filename): ...
2031 2015-02-06 Pedro Alves <palves@redhat.com>
2033 * linux-thread-db.c (find_new_threads_callback): Add debug output.
2035 2015-02-06 Simon Marchi <simon.marchi@ericsson.com>
2038 * breakpoint.c (map_breakpoint_numbers): Check for empty args string.
2039 (enable_count_command): Check args for NULL value.
2041 2015-02-05 Doug Evans <xdje42@gmail.com>
2043 * guile/scm-frame.c: Fix spelling errors in a comment.
2045 2015-02-04 Jan Kratochvil <jan.kratochvil@redhat.com>
2047 * python/python-internal.h (Py_hash_t): Define it for Python <3.2.
2048 * python/py-value.c (valpy_fetch_lazy): Use it. Remove cast to the
2051 2015-02-04 Pedro Alves <palves@redhat.com>
2053 * linux-nat.c (handle_extended_wait): Don't resume LWPs here.
2054 (wait_lwp): Don't call wait_lwp if linux_handle_extended_wait
2056 (resume_stopped_resumed_lwps): Don't check whether the thread is
2057 marked as executing.
2058 (linux_nat_wait_1): Use resume_stopped_resumed_lwps.
2060 2015-02-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
2062 * regset.h (struct regset): Add flags field.
2063 (REGSET_VARIABLE_SIZE): New value for a regset's flags field.
2064 * corelow.c (get_core_register_section): Add warning if the size
2065 exceeds the requested size and the regset does not have the
2066 REGSET_VARIABLE_SIZE flag set.
2067 * alphanbsd-tdep.c (alphanbsd_gregset): Add REGSET_VARIABLE_SIZE
2069 * armbsd-tdep.c (armbsd_gregset): Likewise.
2070 * hppa-hpux-tdep.c (hppa_hpux_regset): Likewise.
2071 * hppaobsd-tdep.c (hppaobsd_gregset): Likewise.
2072 * m68kbsd-tdep.c (m68kbsd_gregset): Likewise.
2073 * mipsnbsd-tdep.c (mipsnbsd_gregset): Likewise.
2075 2015-02-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
2077 * amd64-linux-tdep.c (amd64_linux_iterate_over_regset_sections):
2078 For ".reg-xstate", explicitly specify the requested section size
2079 via X86_XSTATE_SIZE instead of just 0 on input and
2080 X86_XSTATE_MAX_SIZE on output.
2081 * i386-linux-tdep.c (i386_linux_iterate_over_regset_sections):
2084 2015-02-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
2087 * gdbarch.sh (iterate_over_regset_sections_cb): Document this
2088 function type, particularly its SIZE parameter.
2089 * gdbarch.h: Regenerate.
2090 * amd64-tdep.c (amd64_supply_fpregset): In gdb_assert, compare
2091 actual against required size using ">=" instead of "==".
2092 (amd64_collect_fpregset): Likewise.
2093 * i386-tdep.c (i386_supply_gregset): Likewise.
2094 (i386_collect_gregset): Likewise.
2095 (i386_supply_fpregset): Likewise.
2096 (i386_collect_fpregset): Likewise.
2097 * mips-linux-tdep.c (mips_supply_gregset_wrapper): Likewise.
2098 (mips_fill_gregset_wrapper): Likewise.
2099 (mips_supply_fpregset_wrapper): Likewise.
2100 (mips_fill_fpregset_wrapper): Likewise.
2101 (mips64_supply_gregset_wrapper): Likewise.
2102 (mips64_fill_gregset_wrapper): Likewise.
2103 (mips64_supply_fpregset_wrapper): Likewise.
2104 (mips64_fill_fpregset_wrapper): Likewise.
2105 * mn10300-linux-tdep.c (am33_supply_gregset_method): Likewise.
2106 (am33_supply_fpregset_method): Likewise.
2107 (am33_collect_gregset_method): Likewise.
2108 (am33_collect_fpregset_method): Likewise.
2110 2015-02-04 Doug Evans <dje@google.com>
2111 Pedro Alves <palves@redhat.com>
2112 Eli Zaretskii <eliz@gnu.org>
2115 * tui/tui-command.c (tui_refresh_cmd_win): New function.
2116 * tui/tui-command.c (tui_refresh_cmd_win): Declare.
2117 * tui/tui-file.c: #include tui/tui-command.h.
2118 (tui_file_fputs): Refresh command window if stream is not gdb_stdout.
2119 (tui_file_flush): Refresh command window if stream is gdb_stdout.
2120 * tui/tui-io.c (tui_puts): Remove calls to wrefresh, fflush.
2122 2015-02-04 Pedro Alves <palves@redhat.com>
2125 * event-loop.c (gdb_do_one_event): Add default switch case.
2127 2015-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
2129 Filter out inferior gcc option -fpreprocessed.
2130 * compile/compile.c (filter_args): New function.
2133 2015-02-03 Pedro Alves <palves@redhat.com>
2135 * event-loop.c: Don't declare nor define a queue type for
2137 (event_queue): Delete.
2138 (create_event, create_file_event, gdb_event_xfree)
2139 (initialize_event_loop, process_event): Delete.
2140 (gdb_do_one_event): Return as soon as one event is handled.
2141 (handle_file_event): Change prototype. Used the passed in
2142 file_handler pointer and ready_mask instead of looping over all
2144 (gdb_wait_for_event): Update the poll/select timeouts before
2145 blocking. Run event handlers directly instead of queueing events.
2146 Return as soon as one event is handled.
2147 (struct async_event_handler_data): Delete.
2148 (invoke_async_event_handler): Delete.
2149 (check_async_event_handlers): Change return type to int. Run
2150 event handlers directly instead of queueing events. Return as
2151 soon as one event is handled.
2152 (handle_timer_event): Delete.
2153 (update_wait_timeout): New function, factored out from
2155 (poll_timers): Reimplement.
2156 * event-loop.h (initialize_event_loop): Delete declaration.
2157 * top.c (gdb_init): Don't call initialize_event_loop.
2159 2015-02-03 Pedro Alves <palves@redhat.com>
2161 * event-loop.c (clear_async_event_handler): New function.
2162 * event-loop.h (clear_async_event_handler): New declaration.
2163 * record-btrace.c (record_btrace_async): New function.
2164 (init_record_btrace_ops): Install record_btrace_async.
2165 * record-full.c (record_full_async): New function.
2166 (record_full_resume): Don't mark the async event source here.
2167 (init_record_full_ops): Install record_full_async.
2168 (record_full_core_resume): Don't mark the async event source here.
2169 (init_record_full_core_ops): Install record_full_async.
2170 * remote.c (remote_async): Mark and clear the async stop reply
2171 queue event-loop token as appropriate.
2173 2015-02-03 Pedro Alves <palves@redhat.com>
2175 * linux-nat.c (linux_child_follow_fork, linux_nat_wait_1): Use
2176 target_is_async_p instead of target_can_async.
2177 (linux_nat_wait): Use target_is_async_p instead of
2178 target_can_async. Don't enable async here.
2179 * remote.c (interrupt_query, remote_wait, putpkt_binary): Use
2180 target_is_async_p instead of target_can_async.
2182 2015-02-02 Simon Marchi <simon.marchi@ericsson.com>
2184 * varobj.h (lang_varobj_ops): Mention which return values need
2187 2015-02-02 Joel Brobecker <brobecker@adacore.com>
2189 * dwarf2loc.c (dwarf2_evaluate_property): Add i18n marker.
2191 2015-02-02 Joel Brobecker <brobecker@adacore.com>
2194 * ada-lang.c (ada_lookup_symbol_list_worker): Do not re-cache
2195 results found in the cache.
2197 2015-02-02 Joel Brobecker <brobecker@adacore.com>
2200 * ada-lang.c (ada_get_symbol_cache): Set pspace_data->sym_cache
2201 when allocating a new one.
2203 2015-02-01 Tom Tromey <tom@tromey.com>
2205 * MAINTAINERS: Remove myself.
2207 2015-01-31 Doug Evans <xdje42@gmail.com>
2209 * dwarf2read.c (process_structure_scope): Update setting of
2210 TYPE_VPTR_BASETYPE, TYPE_VPTR_FIELDNO.
2211 * gdbtypes.c (internal_type_vptr_fieldno): New function.
2212 (set_type_vptr_fieldno): New function.
2213 (internal_type_vptr_basetype): New function.
2214 (set_type_vptr_basetype): New function.
2215 (get_vptr_fieldno): Update setting of TYPE_VPTR_FIELDNO,
2217 (allocate_cplus_struct_type): Initialize vptr_fieldno.
2218 (recursive_dump_type): Printing of vptr_fieldno, vptr_basetype ...
2219 (print_cplus_stuff): ... moved here.
2220 (copy_type_recursive): Don't copy TYPE_VPTR_BASETYPE.
2221 * gdbtypes.h (struct main_type): Members vptr_fieldno, vptr_basetype
2223 (struct cplus_struct_type): ... here. All uses updated.
2224 (TYPE_VPTR_FIELDNO, TYPE_VPTR_BASETYPE): Rewrite.
2225 (internal_type_vptr_fieldno, set_type_vptr_fieldno): Declare.
2226 (internal_type_vptr_basetype, set_type_vptr_basetype): Declare.
2227 * stabsread.c (read_tilde_fields): Update setting of
2228 TYPE_VPTR_FIELDNO, TYPE_VPTR_BASETYPE.
2230 2015-01-31 Doug Evans <xdje42@gmail.com>
2232 * cp-valprint.c (cp_find_class_member): Rename parameter domain_p
2234 (cp_print_class_member): Rename local domain to self_type.
2235 * dwarf2read.c (quirk_gcc_member_function_pointer): Rename local
2236 domain_type to self_type.
2237 (set_die_type) <need_gnat_info>: Handle
2238 TYPE_CODE_METHODPTR, TYPE_CODE_MEMBERPTR, TYPE_CODE_METHOD.
2239 * gdb-gdb.py (StructMainTypePrettyPrinter): Handle
2240 TYPE_SPECIFIC_SELF_TYPE.
2241 * gdbtypes.c (internal_type_self_type): New function.
2242 (set_type_self_type): New function.
2243 (smash_to_memberptr_type): Rename parameter domain to self_type.
2244 Update setting of TYPE_SELF_TYPE.
2245 (smash_to_methodptr_type): Update setting of TYPE_SELF_TYPE.
2246 (smash_to_method_type): Rename parameter domain to self_type.
2247 Update setting of TYPE_SELF_TYPE.
2248 (check_stub_method): Call smash_to_method_type.
2249 (recursive_dump_type): Handle TYPE_SPECIFIC_SELF_TYPE.
2250 (copy_type_recursive): Ditto.
2251 * gdbtypes.h (enum type_specific_kind): New value
2252 TYPE_SPECIFIC_SELF_TYPE.
2253 (struct main_type) <type_specific>: New member self_type.
2254 (struct cplus_struct_type) <fn_field.type>: Update comment.
2255 (TYPE_SELF_TYPE): Rewrite.
2256 (internal_type_self_type, set_type_self_type): Declare.
2257 * gnu-v3-abi.c (gnuv3_print_method_ptr): Rename local domain to
2259 (gnuv3_method_ptr_to_value): Rename local domain_type to self_type.
2260 * m2-typeprint.c (m2_range): Replace TYPE_SELF_TYPE with
2262 * stabsread.c (read_member_functions): Mark methods with
2263 TYPE_CODE_METHOD, not TYPE_CODE_FUNC. Update setting of
2266 2015-01-31 Doug Evans <xdje42@gmail.com>
2268 * gdbtypes.h (TYPE_SELF_TYPE): Renamed from TYPE_DOMAIN_TYPE.
2271 2015-01-31 Doug Evans <xdje42@gmail.com>
2273 * gnu-v3-abi.c (gnuv3_dynamic_class): Assert only passed structs
2274 or unions. Return zero if union.
2275 (gnuv3_get_vtable): Call check_typedef. Assert only passed structs.
2276 (gnuv3_rtti_type): Pass already-check_typedef'd value to
2278 (compute_vtable_size): Assert only passed structs.
2279 (gnuv3_print_vtable): Don't call gnuv3_get_vtable for non-structs.
2281 2015-01-31 Doug Evans <xdje42@gmail.com>
2283 * gdbtypes.c (copy_type_recursive): Handle all TYPE_SPECIFIC_FIELD
2286 2015-01-31 Gary Benson <gbenson@redhat.com>
2287 Doug Evans <dje@google.com>
2292 * cli/cli-cmds.c (complete_command): Notify user if max-completions
2294 * common/common-exceptions.h (enum errors)
2295 <MAX_COMPLETIONS_REACHED_ERROR>: New value.
2296 * completer.h (get_max_completions_reached_message): New declaration.
2297 (max_completions): Likewise.
2298 (completion_tracker_t): New typedef.
2299 (new_completion_tracker): New declaration.
2300 (make_cleanup_free_completion_tracker): Likewise.
2301 (maybe_add_completion_enum): New enum.
2302 (maybe_add_completion): New declaration.
2303 (throw_max_completions_reached_error): Likewise.
2304 * completer.c (max_completions): New global variable.
2305 (new_completion_tracker): New function.
2306 (free_completion_tracker): Likewise.
2307 (make_cleanup_free_completion_tracker): Likewise.
2308 (maybe_add_completions): Likewise.
2309 (throw_max_completions_reached_error): Likewise.
2310 (complete_line): Remove duplicates and limit result to max_completions
2312 (get_max_completions_reached_message): New function.
2313 (gdb_display_match_list): Handle max_completions.
2314 (_initialize_completer): New declaration and function.
2315 * symtab.c: Include completer.h.
2316 (completion_tracker): New static variable.
2317 (completion_list_add_name): Call maybe_add_completion.
2318 (default_make_symbol_completion_list_break_on_1): Renamed from
2319 default_make_symbol_completion_list_break_on. Maintain
2320 completion_tracker across calls to completion_list_add_name.
2321 (default_make_symbol_completion_list_break_on): New function.
2322 * top.c (init_main): Set rl_completion_display_matches_hook.
2323 * tui/tui-io.c: Include completer.h.
2324 (tui_old_rl_display_matches_hook): New static global.
2325 (tui_rl_display_match_list): Notify user if max-completions reached.
2326 (tui_setup_io): Save/restore rl_completion_display_matches_hook.
2327 * NEWS (New Options): Mention set/show max-completions.
2329 2015-01-31 Gary Benson <gbenson@redhat.com>
2331 * symtab.c (struct add_name_data) <code>: New field.
2333 (add_symtab_completions): New function.
2334 (symtab_expansion_callback): Likewise.
2335 (default_make_symbol_completion_list_break_on): Set datum.code.
2336 Move minimal symbol scan before calling expand_symtabs_matching.
2337 Scan known primary symtabs for externs and statics before calling
2338 expand_symtabs_matching. Pass symtab_expansion_callback as
2339 expansion_notify argument to expand_symtabs_matching. Do not scan
2340 primary symtabs for externs and statics after calling
2341 expand_symtabs_matching.
2343 2015-01-31 Gary Benson <gbenson@redhat.com>
2345 * symfile.h (expand_symtabs_exp_notify_ftype): New typedef.
2346 (struct quick_symbol_functions) <expand_symtabs_matching>:
2347 New argument expansion_notify. All uses updated.
2348 (expand_symtabs_matching): New argument expansion_notify.
2350 * symfile-debug.c (debug_qf_expand_symtabs_matching):
2351 Also print expansion notify.
2352 * symtab.c (expand_symtabs_matching_via_partial): Call
2353 expansion_notify whenever a partial symbol table is expanded.
2354 * dwarf2read.c (dw2_expand_symtabs_matching): Call
2355 expansion_notify whenever a symbol table is instantiated.
2357 2015-01-31 Doug Evans <xdje42@gmail.com>
2359 * cli-out.c: #include completer.h, readline/readline.h.
2360 (cli_mld_crlf, cli_mld_putch, cli_mld_puts): New functions.
2361 (cli_mld_flush, cld_mld_erase_entire_line): Ditto.
2362 (cli_mld_beep, cli_mld_read_key, cli_display_match_list): Ditto.
2363 * cli-out.h (cli_display_match_list): Declare.
2364 * completer.c (MB_INVALIDCH, MB_NULLWCH): New macros.
2365 (ELLIPSIS_LEN): Ditto.
2366 (gdb_get_y_or_n, gdb_display_match_list_pager): New functions.
2367 (gdb_path_isdir, gdb_printable_part, gdb_fnwidth): Ditto.
2368 (gdb_fnprint, gdb_print_filename): Ditto.
2369 (gdb_complete_get_screenwidth, gdb_display_match_list_1): Ditto.
2370 (gdb_display_match_list): Ditto.
2371 * completer.h (mld_crlf_ftype, mld_putch_ftype): New typedefs.
2372 (mld_puts_ftype, mld_flush_ftype, mld_erase_entire_line_ftype): Ditto.
2373 (mld_beep_ftype, mld_read_key_ftype): Ditto.
2374 (match_list_displayer): New struct.
2375 (gdb_display_match_list): Declare.
2376 * top.c (init_main): Set rl_completion_display_matches_hook.
2377 * tui/tui-io.c: #include completer.h.
2378 (printable_part, PUTX, print_filename, get_y_or_n): Delete.
2379 (tui_mld_crlf, tui_mld_putch, tui_mld_puts): New functions.
2380 (tui_mld_flush, tui_mld_erase_entire_line, tui_mld_beep): Ditto.
2381 (tui_mld_getc, tui_mld_read_key): Ditto.
2382 (tui_rl_display_match_list): Rewrite.
2383 (tui_handle_resize_during_io): New arg for_completion. All callers
2386 2015-01-31 Doug Evans <xdje42@gmail.com>
2388 Add symbol lookup cache.
2389 * NEWS: Document new options and commands.
2390 * symtab.c (symbol_cache_key): New static global.
2391 (DEFAULT_SYMBOL_CACHE_SIZE, MAX_SYMBOL_CACHE_SIZE): New macros.
2392 (SYMBOL_LOOKUP_FAILED): New macro.
2393 (symbol_cache_slot_state): New enum.
2394 (block_symbol_cache): New struct.
2395 (symbol_cache): New struct.
2396 (new_symbol_cache_size, symbol_cache_size): New static globals.
2397 (hash_symbol_entry, eq_symbol_entry): New functions.
2398 (symbol_cache_byte_size, resize_symbol_cache): New functions.
2399 (make_symbol_cache, free_symbol_cache): New functions.
2400 (get_symbol_cache, symbol_cache_cleanup): New function.
2401 (set_symbol_cache_size, set_symbol_cache_size_handler): New functions.
2402 (symbol_cache_lookup, symbol_cache_clear_slot): New function.
2403 (symbol_cache_mark_found, symbol_cache_mark_not_found): New functions.
2404 (symbol_cache_flush, symbol_cache_dump): New functions.
2405 (maintenance_print_symbol_cache): New function.
2406 (maintenance_flush_symbol_cache): New function.
2407 (symbol_cache_stats): New function.
2408 (maintenance_print_symbol_cache_statistics): New function.
2409 (symtab_new_objfile_observer): New function.
2410 (symtab_free_objfile_observer): New function.
2411 (lookup_static_symbol, lookup_global_symbol): Use symbol cache.
2412 (_initialize_symtab): Init symbol_cache_key. New parameter
2413 maint symbol-cache-size. New maint commands print symbol-cache,
2414 print symbol-cache-statistics, flush-symbol-cache.
2415 Install new_objfile, free_objfile observers.
2417 2015-01-31 Joel Brobecker <brobecker@adacore.com>
2420 * symfile.c (clear_symtab_users): Move call to breakpoint_re_set
2423 2015-01-31 Doug Evans <xdje42@gmail.com>
2425 * NEWS: Mention inlined scripts in .debug_gdb_scripts section.
2426 * auto-load.c: #include ctype.h.
2427 (struct auto_load_pspace_info): Replace member loaded_scripts with
2428 new members loaded_script_files, loaded_script_texts.
2429 (auto_load_pspace_data_cleanup): Update.
2430 (init_loaded_scripts_info): Update.
2431 (get_auto_load_pspace_data_for_loading): Update.
2432 (maybe_add_script_file): Renamed from maybe_add_script. All callers
2434 (maybe_add_script_text): New function.
2435 (clear_section_scripts): Update.
2436 (source_script_file, execute_script_contents): New functions.
2437 (source_section_scripts): Add support for
2438 SECTION_SCRIPT_ID_PYTHON_TEXT, SECTION_SCRIPT_ID_GUILE_TEXT.
2439 (print_scripts): New function.
2440 (auto_load_info_scripts): Also print inlined scripts.
2441 (maybe_print_unsupported_script_warning): Renamed from
2442 unsupported_script_warning_print. All callers updated.
2443 (maybe_print_script_not_found_warning): Renamed from
2444 script_not_found_warning_print. All callers updated.
2445 * extension-priv.h (struct extension_language_script_ops): New member
2446 objfile_script_executor.
2447 * extension.c (ext_lang_objfile_script_executor): New function.
2448 * extension.h (objfile_script_executor_func): New typedef.
2449 (ext_lang_objfile_script_executor): Declare.
2450 * guile/guile-internal.h (gdbscm_execute_objfile_script): Declare.
2451 * guile/guile.c (guile_extension_script_ops): Update.
2452 * guile/scm-objfile.c (gdbscm_execute_objfile_script): New function.
2453 * python/python.c (python_extension_script_ops): Update.
2454 (gdbpy_execute_objfile_script): New function.
2456 2015-01-31 Eli Zaretskii <eliz@gnu.org>
2458 * tui/tui-io.c (tui_expand_tabs): New function.
2459 (tui_puts, tui_redisplay_readline): Expand TABs into the
2460 appropriate number of spaces.
2461 * tui/tui-regs.c: Include tui-io.h.
2462 (tui_register_format): Call tui_expand_tabs to expand TABs into
2463 the appropriate number of spaces.
2464 * tui/tui-io.h: Add prototype for tui_expand_tabs.
2466 2015-01-30 Doug Evans <dje@google.com>
2468 * NEWS: "info source" command now display producer string if present.
2469 * source.c (source_info): Print producer string if present.
2471 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
2473 * varobj.c (varobj_delete): Fix comment.
2475 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
2477 * varobj.c (create_child): Modify comment.
2479 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
2481 * ada-varobj.c (ada_number_of_children): Constify struct varobj *
2483 (ada_name_of_variable): Same.
2484 (ada_path_expr_of_child): Same.
2485 (ada_value_of_variable): Same.
2486 (ada_value_is_changeable_p): Same.
2487 (ada_value_has_mutated): Same.
2488 * c-varobj.c (varobj_is_anonymous_child): Same.
2489 (c_is_path_expr_parent): Same.
2490 (c_number_of_children): Same.
2491 (c_name_of_variable): Same.
2492 (c_path_expr_of_child): Same.
2494 (c_value_of_variable): Same.
2495 (cplus_number_of_children): Same.
2496 (cplus_name_of_variable): Same.
2497 (cplus_path_expr_of_child): Same.
2498 (cplus_value_of_variable): Same.
2499 * jv-varobj.c (java_number_of_children): Same.
2500 (java_name_of_variable): Same.
2501 (java_path_expr_of_child): Same.
2502 (java_value_of_variable): Same.
2503 * varobj.c (number_of_children): Same.
2504 (name_of_variable): Same.
2506 (varobj_ensure_python_env): Same.
2507 (varobj_get_objname): Same.
2508 (varobj_get_expression): Same.
2509 (varobj_get_display_format): Same.
2510 (varobj_get_display_hint): Same.
2511 (varobj_has_more): Same.
2512 (varobj_get_thread_id): Same.
2513 (varobj_get_frozen): Same.
2514 (dynamic_varobj_has_child_method): Same.
2515 (varobj_get_gdb_type): Same.
2516 (is_path_expr_parent): Same.
2517 (varobj_default_is_path_expr_parent): Same.
2518 (varobj_get_language): Same.
2519 (varobj_get_attributes): Same.
2520 (varobj_is_dynamic_p): Same.
2521 (varobj_get_child_range): Same.
2522 (varobj_value_has_mutated): Same.
2523 (varobj_get_value_type): Same.
2524 (number_of_children): Same.
2525 (name_of_variable): Same.
2526 (check_scope): Same.
2527 (varobj_editable_p): Same.
2528 (varobj_value_is_changeable_p): Same.
2529 (varobj_floating_p): Same.
2530 (varobj_default_value_is_changeable_p): Same.
2532 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
2534 * varobj.c (varobj_get_path_expr): Set var->path_expr.
2535 * c-varobj.c (c_path_expr_of_child): Set local var instead of
2537 (cplus_path_expr_of_child): Same.
2539 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
2541 * mi-cmd-var.c (print_varobj): Free varobj_get_expression
2543 (mi_cmd_var_info_expression): Same.
2544 * varobj.c (varobj_get_expression): Mention in the comment that
2545 the result must by freed by the caller.
2547 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
2549 * mi/mi-cmd-var.c (mi_cmd_var_info_type): Free result of
2551 (varobj_update_one): Same.
2552 * varobj.c (update_type_if_necessary): Free curr_type_str and
2554 (varobj_get_type): Specify in comment that the result needs to be
2555 freed by the caller.
2557 2015-01-29 Doug Evans <dje@google.com>
2560 * dwarf2read.c (dwarf_decode_line_header): Punt if version > 4.
2562 2015-01-25 Mark Wielaard <mjw@redhat.com>
2564 * dwarf2read.c (checkproducer): Call producer_is_gcc.
2565 * utils.c (producer_is_gcc_ge_4): Likewise.
2566 (producer_is_gcc): New function.
2567 * utils.h (producer_is_gcc): New declaration.
2569 2015-01-29 Joel Brobecker <brobecker@adacore.com>
2571 * gdbtypes.h (struct dynamic_prop): New PROP_ADDR_OFFSET enum
2573 * gdbtypes.c (resolve_dynamic_type_internal): Replace "addr"
2574 parameter by "addr_stack" parameter.
2575 (resolve_dynamic_range): Replace "addr" parameter by
2576 "stack_addr" parameter. Update function documentation.
2577 Update code accordingly.
2578 (resolve_dynamic_array, resolve_dynamic_union)
2579 (resolve_dynamic_struct, resolve_dynamic_type_internal): Likewise.
2580 (resolve_dynamic_type): Update code, following the changes made
2581 to resolve_dynamic_type_internal's interface.
2582 * dwarf2loc.h (struct property_addr_info): New.
2583 (dwarf2_evaluate_property): Replace "address" parameter
2584 by "addr_stack" parameter. Adjust function documentation.
2585 (struct dwarf2_offset_baton): New.
2586 (struct dwarf2_property_baton): Update documentation of
2587 field "referenced_type" to be more general. New field
2588 "offset_info" in union data field.
2589 * dwarf2loc.c (dwarf2_evaluate_property): Replace "address"
2590 parameter by "addr_stack" parameter. Adjust code accordingly.
2591 Add support for PROP_ADDR_OFFSET properties.
2592 * dwarf2read.c (attr_to_dynamic_prop): Add support for
2593 DW_AT_data_member_location attributes as well. Use case
2594 statements instead of if/else condition.
2596 2015-01-29 Joel Brobecker <brobecker@adacore.com>
2598 * ada-varobj.c (ada_varobj_get_array_number_of_children):
2599 Return zero if PARENT_VALUE is NULL and parent_type's
2600 range type is dynamic.
2602 2015-01-29 Joel Brobecker <brobecker@adacore.com>
2604 * gdbtypes.c (is_dynamic_type_internal) <TYPE_CODE_RANGE>: Return
2605 nonzero if the type's subtype is dynamic.
2606 (resolve_dynamic_range): Also resolve the range's subtype.
2608 2015-01-29 Alexander Klimov <alserkli@inbox.ru> (tiny patch)
2610 Pushed by Joel Brobecker <brobecker@adacore.com>.
2611 * symfile.c (unmap_overlay_command): Initialize sec to NULL.
2613 2015-01-27 Doug Evans <dje@google.com>
2615 * NEWS: Mention gdb.Objfile.username.
2616 * python/py-objfile.c (objfpy_get_username): New function.
2617 (objfile_getset): Add "username".
2619 2015-01-24 Mark Wielaard <mjw@redhat.com>
2621 * stack.c (return_command): Markup warning message with _.
2623 2015-01-24 Doug Evans <xdje42@gmail.com>
2625 * gdbtypes.h (TYPE_TYPE_SPECIFIC): Delete.
2627 2015-01-24 Jan Kratochvil <jan.kratochvil@redhat.com>
2629 Fix 100x slowdown regression on DWZ files.
2630 * dwarf2read.c (struct dwarf2_per_objfile): Add line_header_hash.
2631 (struct line_header): Add offset and offset_in_dwz.
2632 (dwarf_decode_lines): Add parameter decode_mapping to the declaration.
2633 (free_line_header_voidp): New declaration.
2634 (line_header_hash, line_header_hash_voidp, line_header_eq_voidp): New
2636 (dwarf2_build_include_psymtabs): Update dwarf_decode_lines caller.
2637 (handle_DW_AT_stmt_list): Use line_header_hash.
2638 (free_line_header_voidp): New function.
2639 (dwarf_decode_line_header): Initialize offset and offset_in_dwz.
2640 (dwarf_decode_lines): New parameter decode_mapping, use it.
2641 (dwarf2_free_objfile): Free line_header_hash.
2643 2015-01-23 Simon Marchi <simon.marchi@ericsson.com>
2646 * valops.c (value_rtti_indirect_type): Catch exception thrown by
2649 2015-01-15 Mark Wielaard <mjw@redhat.com>
2651 * dwarf2read.c (read_subroutine_type): Set TYPE_NO_RETURN from
2653 * gdbtypes.h (struct func_type): Add is_noreturn field flag. Make
2654 calling_convention an 8 bit bit field.
2655 (TYPE_NO_RETURN): New macro.
2656 * infcmd.c (finish_command): Query if function does not return
2658 * stack.c (return_command): Likewise.
2660 2015-01-23 Pedro Alves <palves@redhat.com>
2662 * linux-nat.c (linux_is_async_p): New macro.
2663 (linux_nat_is_async_p):
2664 (linux_nat_terminal_inferior): Check whether the target can async
2665 instead of whether it is already async.
2666 (linux_nat_terminal_ours): Don't check whether the target is
2668 (linux_async_pipe): Use linux_is_async_p.
2670 2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
2672 * NEWS (Changes since GDB 7.9): Add 'thread apply all' option
2674 * thread.c (tp_array_compar_ascending, tp_array_compar): New.
2675 (thread_apply_all_command): Parse CMD for tp_array_compar_ascending.
2676 Sort tp_array using tp_array_compar.
2677 (_initialize_thread): Extend thread_apply_all_command help.
2679 2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
2681 * corelow.c (core_open): Call also thread_command.
2682 * gdbthread.h (thread_command): New prototype moved from ...
2683 * thread.c (thread_command): ... here.
2684 (thread_command): Make it global.
2686 2015-01-22 Pedro Alves <palves@redhat.com>
2688 * configure.ac [*mingw32*]: Check $curses_found instead of
2690 * configure: Regenerate.
2691 * windows-termcap.c: Remove HAVE_CURSES_H, HAVE_NCURSES_H and
2692 HAVE_NCURSES_NCURSES_H checks.
2694 2015-01-22 Eli Zaretskii <eliz@gnu.org>
2696 * tui/tui.c (tui_enable) [__MINGW32__]: If the call to 'newterm'
2697 fails with the 1st arg NULL, try again with "unknown". Don't test
2698 the "cup" capability: it isn't supported by the Windows port of
2699 ncurses, but the Windows console driver is still capable of
2702 2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
2704 * compile/compile.c (_initialize_compile): Use -fPIE for compile_args.
2706 2015-01-22 Eli Zaretskii <eliz@gnu.org>
2708 * Makefile.in (HFILES_NO_SRCDIR): Remove ada-varobj.h.
2709 (ALLDEPFILES): Remove irix5-nat.c. These two are part of the
2710 reason that "make TAGS" is broken.
2712 2015-01-22 Chen Gang <gang.chen.5i5j@gmail.com>
2714 * hppa-tdep.c (inst_saves_gr): Fix logical working flow issues
2715 and check additional store instructions.
2717 2015-01-21 Wei-cheng Wang <cole945@gmail.com>
2719 * MAINTAINERS (Write After Approval): Add "Wei-cheng Wang".
2721 2015-01-21 Wei-cheng Wang <cole945@gmail.com>
2723 * ppc-linux-tdep.c (ppc_skip_trampoline_code,
2724 ppc_canonicalize_syscall, ppc_linux_syscall_record,
2725 ppc_linux_record_signal, ppc_init_linux_record_tdep): Add comments.
2726 * ppc64-tdep.c (ppc64_skip_trampoline_code): Likewise.
2727 * rs6000-tdep.c (rs6000_epilogue_frame_cache,
2728 rs6000_epilogue_frame_this_id, rs6000_epilogue_frame_prev_register,
2729 rs6000_epilogue_frame_sniffer, ppc_record_vsr, ppc_process_record_op4,
2730 ppc_process_record_op19, ppc_process_record_op31,
2731 ppc_process_record_op59, ppc_process_record_op60,
2732 ppc_process_record_op63): Likewise.
2734 2015-01-20 Joel Brobecker <brobecker@adacore.com>
2736 * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason_string)
2737 (linux_ptrace_test_ret_to_nx): Use safe_strerror instead of
2740 2015-01-20 Wei-cheng Wang <cole945@gmail.com>
2742 * rs6000-tdep.c (ppc_process_record_op4, ppc_process_record_op19,
2743 ppc_process_record_op31, ppc_process_record_op59,
2744 ppc_process_record_op60, ppc_process_record_op63,
2745 ppc_process_record): Fix -Wformat warning.
2746 * rs6000-tdep.c (rs6000_epilogue_frame_cache, ppc_process_record_op60):
2747 Remove unused variables.
2749 2015-01-20 Chen Gang <gang.chen.5i5j@gmail.com>
2751 * MAINTAINERS (Write After Approval): Add "Chen Gang".
2753 2015-01-19 Eli Zaretskii <eliz@gnu.org>
2755 * configure.ac [*mingw32*]: Only add windows-termcap.o to
2756 CONFIG_OBS if not building with a curses library.
2757 * configure: Regenerate.
2759 * windows-termcap.c: Include defs.h. Make the whole body empty if
2760 either one of HAVE_CURSES_H or HAVE_NCURSES_H or
2761 HAVE_NCURSES_NCURSES_H is defined.
2763 2015-01-19 Joel Brobecker <brobecker@adacore.com>
2765 * rs6000-tdep.c (rs6000_gdbarch_init): Move divide operator
2766 from end of line to start of next line.
2768 2015-01-17 Wei-cheng Wang <cole945@gmail.com>
2770 * ppc-linux-tdep.c (ppc_skip_trampoline_code):
2771 Scan PLT stub backward for reverse debugging.
2772 * ppc64-tdep.c (ppc64_skip_trampoline_code): Likewise.
2774 2015-01-17 Wei-cheng Wang <cole945@gmail.com>
2775 Ulrich Weigand <uweigand@de.ibm.com>
2777 * configure.tgt (powerpc*-*-linux): Add linux-record.o to
2779 (ppc_linux_record_tdep, ppc64_linux_record_tdep): New for linux syscall
2781 (ppc_canonicalize_syscall, ppc_linux_syscall_record,
2782 ppc_linux_record_signal, ppc_init_linux_record_tdep): New functions.
2783 (ppc_linux_init_abi): Set process_record, process_record_signal.
2784 * ppc-tdep.h (struct gdbarch_tdep): Add ppc_syscall_record and
2785 ppc_linux_record_tdep to gdbarch_tdep.
2786 (ppc_process_record): New declaration.
2787 * rs6000-tdep.c (ppc_record_vsr, ppc_process_record_op4,
2788 ppc_process_record_op19, ppc_process_record_op31,
2789 ppc_process_record_op59, ppc_process_record_op60,
2790 ppc_process_record_op63, ppc_process_record): New functions.
2792 2015-01-17 Wei-cheng Wang <cole945@gmail.com>
2794 * rs6000-tdep.c (rs6000_in_function_epilogue_p): Rename to
2795 rs6000_in_function_epilogue_frame_p and add an argument
2797 (rs6000_epilogue_frame_cache, rs6000_epilogue_frame_this_id,
2798 rs6000_epilogue_frame_prev_register, rs6000_epilogue_frame_sniffer):
2800 (rs6000_epilogue_frame_unwind): New.
2801 (rs6000_gdbarch_init): Append epilogue unwinder.
2803 2015-01-16 Sergio Durigan Junior <sergiodj@redhat.com>
2805 * nat/linux-personality.c: Replace "#ifndef
2806 HAVE_DECL_ADDR_NO_RANDOMIZE" by "#if
2807 !HAVE_DECL_ADDR_NO_RANDOMIZE", fixing a regression in RHEL-5
2810 2015-01-16 Eli Zaretskii <eliz@gnu.org>
2812 * tui/tui-win.c (tui_rehighlight_all, tui_set_var_cmd): New
2814 (_initialize_tui_win) <border-kind, border-mode>:
2815 <active-border-mode>: Use tui_set_var_cmd as the "set" function.
2816 (tui_set_tab_width_command): Fix the commentary.
2818 * tui/tui-win.h: Add prototype for tui_rehighlight_all.
2820 * tui/tui-win.c (tui_scroll_left_command, tui_scroll_right_command):
2822 (tui_set_tab_width_command): Delete and recreate the source and
2823 the disassembly windows, to show the effect of the changed tab
2826 * tui/tui-data.h (LINE_PREFIX): Make shorter
2827 (MAX_PID_WIDTH): Enlarge from 14 to 19, to leave enough space for
2828 "Thread NNNNN.XXXX" thread ID notation on Windows.
2830 2015-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
2832 Fix gcc-5 compilation.
2833 * hppa-tdep.c (inst_saves_gr): Fix parentheses typo.
2835 2015-01-15 Sergio Durigan Junior <sergiodj@redhat.com>
2837 * Makefile.in (HFILES_NO_SRCDIR): Add nat/linux-personality.h.
2838 (linux-personality.o): New rule.
2839 * common/common-defs.h: Include <stdint.h>.
2840 * config/aarch64/linux.mh (NATDEPFILES): Include
2841 linux-personality.o.
2842 * config/alpha/alpha-linux.mh (NATDEPFILES): Likewise.
2843 * config/arm/linux.mh (NATDEPFILES): Likewise.
2844 * config/i386/linux64.mh (NATDEPFILES): Likewise.
2845 * config/i386/linux.mh (NATDEPFILES): Likewise.
2846 * config/ia64/linux.mh (NATDEPFILES): Likewise.
2847 * config/m32r/linux.mh (NATDEPFILES): Likewise.
2848 * config/m68k/linux.mh (NATDEPFILES): Likewise.
2849 * config/mips/linux.mh (NATDEPFILES): Likewise.
2850 * config/pa/linux.mh (NATDEPFILES): Likewise.
2851 * config/powerpc/linux.mh (NATDEPFILES): Likewise.
2852 * config/powerpc/ppc64-linux.mh (NATDEPFILES): Likewise.
2853 * config/powerpc/spu-linux.mh (NATDEPFILES): Likewise.
2854 * config/s390/linux.mh (NATDEPFILES): Likewise.
2855 * config/sparc/linux64.mh (NATDEPFILES): Likewise.
2856 * config/sparc/linux.mh (NATDEPFILES): Likewise.
2857 * config/tilegx/linux.mh (NATDEPFILES): Likewise.
2858 * config/xtensa/linux.mh (NATDEPFILES): Likewise.
2859 * defs.h: Remove #include <stdint.h> (moved to
2860 common/common-defs.h).
2861 * linux-nat.c: Include nat/linux-personality.h. Remove #include
2862 <sys/personality.h>; do not define ADDR_NO_RANDOMIZE (moved to
2863 nat/linux-personality.c).
2864 (linux_nat_create_inferior): Remove code to disable address space
2865 randomization (moved to nat/linux-personality.c). Create cleanup
2866 to disable address space randomization.
2867 * nat/linux-personality.c: New file.
2868 * nat/linux-personality.h: Likewise.
2870 2015-01-15 Sergio Durigan Junior <sergiodj@redhat.com>
2872 * Makefile.in (ALLDEPFILES): Including common/mingw-strerror.c and
2873 common/posix-strerror.c.
2874 (posix-strerror.o): New rule.
2875 (mingw-strerror.o): Likewise.
2876 * common/common-utils.h (safe_strerror): Move prototype to here,
2878 * common/common.host: New file.
2879 * common/mingw-strerror.c: Likewise.
2880 * common/posix-strerror.c: Likewise.
2881 * configure: Regenerated.
2882 * configure.ac: Source common/common.host. Add variable
2883 common_host_obs to gdb_host_obs.
2884 * contrib/ari/gdb_ari.sh: Mention gdb/common/mingw-strerror.c and
2885 gdb/common/posix-strerror.c when warning about the use of
2887 * mingw-hdep.c (safe_strerror): Remove definition; move it to
2888 common/mingw-strerror.c.
2889 * posix-hdep.c (safe_strerror): Remove definition; move it to
2890 common/posix-hdep.c.
2891 * utils.h (safe_strerror): Remove prototype; move to
2892 common/common-utils.h.
2894 2015-01-15 Joel Brobecker <brobecker@adacore.com>
2898 2015-01-15 Joel Brobecker <brobecker@adacore.com>
2900 * ada-lang.c (ada_array_bound_from_type): Ignore array's parallel
2901 ___XA type if the array has already been fixed.
2903 2015-01-14 Yao Qi <yao@codesourcery.com>
2905 * Makefile.in (ppc-linux.o): New rule.
2906 * config/powerpc/ppc64-linux.mh (NATDEPFILES): Add ppc-linux.o.
2907 * configure.ac: AC_CHECK_FUNCS(getauxval).
2908 * config.in: Re-generated.
2909 * configure: Re-generated.
2910 * nat/ppc-linux.h [__powerpc64__] (ppc64_64bit_inferior_p):
2912 * nat/ppc-linux.c: New file.
2913 * ppc-linux-nat.c (ppc_linux_target_wordsize) [__powerpc64__]:
2914 Call ppc64_64bit_inferior_p.
2916 2015-01-14 Yao Qi <yao@codesourcery.com>
2918 * ppc-linux-nat.c (PT_ORIG_R3, PT_TRAP): Move to
2920 (PPC_FEATURE_CELL, PPC_FEATURE_BOOKE): Likewise.
2921 (PPC_FEATURE_HAS_DFP): Likewise.
2922 (PTRACE_GETVRREGS, PTRACE_SETVRREGS): Likewise.
2923 (PTRACE_GETVSXREGS, PTRACE_SETVSXREGS): Likewise.
2924 (PTRACE_GETEVRREGS, PTRACE_SETEVRREGS): Likewise.
2925 Include "nat/ppc-linux.h".
2926 * nat/ppc-linux.h: New file.
2927 * Makefile.in (HFILES_NO_SRCDIR): Add nat/ppc-linux.h.
2929 2015-01-14 Pedro Alves <palves@redhat.com>
2932 * breakpoint.c: Include "interps.h".
2933 (bpstat_do_actions_1): Also check whether the interpreter is
2936 2015-01-14 Pedro Alves <palves@redhat.com>
2939 * infrun.c (reinstall_readline_callback_handler_cleanup): Don't
2940 reinstall if the interpreter is sync.
2942 2015-01-13 Doug Evans <dje@google.com>
2944 * objfiles.c (objfile_filename): New function.
2945 * objfiles.h (objfile_filename): Declare it.
2946 (objfile_name): Add function comment.
2947 * python/py-objfile.c (objfpy_lookup_objfile_by_name): Try both the
2948 bfd file name (which may be realpath'd), and the original name.
2950 2015-01-13 Joel Brobecker <brobecker@adacore.com>
2952 * NEWS: Create a new section for the next release branch.
2953 Rename the section of the current branch, now that it has
2956 2015-01-13 Joel Brobecker <brobecker@adacore.com>
2958 GDB 7.9 branch created (92fc2e6978d9a7c8324c7e851dbee59e22ec7a37):
2959 * version.in: Bump version to 7.9.50.DATE-cvs.
2961 2015-01-13 Joel Brobecker <brobecker@adacore.com>
2963 * nat/linux-procfs.c (linux_proc_attach_tgid_threads):
2964 Remove trailing new-line in argument of call to warning.
2966 2015-01-13 Joel Brobecker <brobecker@adacore.com>
2968 * linux-nat.c (attach_proc_task_lwp_callback): Remove trailing
2969 new-line in argument of call to "warning".
2971 2015-01-13 Joel Brobecker <brobecker@adacore.com>
2973 * ada-lang.c (ada_lookup_symbol_nonlocal): If name not found
2974 in static block, then try searching for primitive types.
2976 2015-01-12 Patrick Palka <patrick@parcs.ath.cx>
2978 * top.h (gdb_add_history): Declare.
2979 * top.c (command_count): New variable.
2980 (gdb_add_history): New function.
2981 (gdb_safe_append_history): New static function.
2982 (quit_force): Call it.
2983 (command_line_input): Use gdb_add_history instead of
2985 * event-top.c (command_line_handler): Likewise.
2987 2015-01-12 James Clarke <jrtc27@jrtc27.com> (tiny patch)
2990 * darwin-nat.c: Replace <machine/setjmp.h> #include by
2991 <setjmp.h> #include.
2993 2015-01-11 Doug Evans <xdje42@gmail.com>
2995 * dwarf2read.c (compute_delayed_physnames): Use TYPE_FN_FIELD_PHYSNAME.
2997 2015-01-11 Doug Evans <xdje42@gmail.com>
3000 * NEWS: The "maint demangle" command is renamed as "demangle".
3001 * demangle.c: #include cli/cli-utils.h, language.h.
3002 (demangle_command): New function.
3003 (_initialize_demangle): Add new command "demangle".
3004 * maint.c (maintenance_demangle): Stub out.
3005 (_initialize_maint_cmds): Update help text for "maint demangle",
3006 and mark as deprecated.
3008 2015-01-11 Mark Kettenis <kettenis@gnu.org>
3010 * inf-ptrace.c (inf_ptrace_follow_fork): Adjust now that
3011 inferior_thread is a function.
3013 2015-01-09 Patrick Palka <patrick@parcs.ath.cx>
3015 * Makefile.in (.y.c): Don't munge yacc's #line
3018 2015-01-09 Patrick Palka <patrick@parcs.ath.cx>
3020 * utils.c (defaulted_query): Rewrite to use gdb_readline_wrapper
3021 to prompt for input.
3022 * tui/tui-hooks.c (tui_query_hook): Remove.
3023 (tui_install_hooks): Don't set deprecated_query_hook.
3024 * tui/tui-io.c (tui_redisplay_readline): Fix off-by-one error in
3025 height calculation. Always update the command window's cur_line.
3027 2015-01-09 Pedro Alves <palves@redhat.com>
3029 * breakpoint.c (hardware_breakpoint_inserted_here_p): New
3031 * breakpoint.h (hardware_breakpoint_inserted_here_p): New
3033 * linux-nat.c (linux_nat_status_is_event): Move higher up in file.
3034 (linux_resume_one_lwp): Store the thread's PC. Adjust to clear
3036 (check_stopped_by_watchpoint): New function.
3037 (save_sigtrap): Reimplement.
3038 (linux_nat_stopped_by_watchpoint): Adjust.
3039 (linux_nat_lp_status_is_event): Delete.
3040 (stop_wait_callback): Only call save_sigtrap after storing the
3042 (status_callback): If the thread had been stopped for a breakpoint
3043 that has since been removed, discard the event and resume the LWP.
3044 (count_events_callback, select_event_lwp_callback): Use
3045 lwp_status_pending_p instead of linux_nat_lp_status_is_event.
3046 (cancel_breakpoint): Rename to ...
3047 (check_stopped_by_breakpoint): ... this. Record whether the LWP
3048 stopped for a software breakpoint or hardware breakpoint.
3049 (select_event_lwp): Only give preference to the stepping LWP in
3050 all-stop mode. Adjust comments.
3051 (stop_and_resume_callback): Remove references to new_pending_p.
3052 (linux_nat_filter_event): Likewise. Leave exit events of the
3053 leader thread pending here. Handle signal short circuiting here.
3054 Only call save_sigtrap after storing the pending waitstatus.
3055 (linux_nat_wait_1): Remove 'retry' label. Remove references to
3056 new_pending. Don't handle leaving events the caller is not
3057 interested in pending here, nor handle signal short-circuiting
3058 here. Also give equal priority to all LWPs that have had events
3059 in non-stop mode. If reporting a software breakpoint event,
3060 unadjust the LWP's PC.
3061 * linux-nat.h (enum lwp_stop_reason): New.
3062 (struct lwp_info) <stop_pc>: New field.
3063 (struct lwp_info) <stopped_by_watchpoint>: Delete field.
3064 (struct lwp_info) <stop_reason>: New field.
3065 * x86-linux-nat.c (x86_linux_prepare_to_resume): Adjust.
3067 2015-01-09 Pedro Alves <palves@redhat.com>
3069 * linux-nat.c (linux_handle_extended_wait) <PTRACE_EVENT_EXEC>:
3070 Set the LWP's 'resumed' flag.
3072 2015-01-09 Pedro Alves <palves@redhat.com>
3074 * linux-nat.c (linux_resume_one_lwp): New function.
3075 (resume_lwp): Use lwp_status_pending_p and linux_resume_one_lwp.
3076 (linux_nat_resume): Use lwp_status_pending_p and
3077 linux_resume_one_lwp.
3078 (linux_handle_syscall_trap): Use linux_resume_one_lwp.
3079 (linux_handle_extended_wait): Use linux_resume_one_lwp.
3080 (status_callback, running_callback): Use lwp_status_pending_p.
3081 (lwp_status_pending_p): New function.
3082 (stop_and_resume_callback): Use lwp_status_pending_p.
3083 (linux_nat_filter_event): Use linux_resume_one_lwp.
3084 (linux_nat_wait_1): Always use status_callback to look for an LWP
3085 with a pending status. Use linux_resume_one_lwp.
3086 (resume_stopped_resumed_lwps): Use lwp_status_pending_p and
3087 linux_resume_one_lwp.
3089 2015-01-09 Pedro Alves <palves@redhat.com>
3091 * breakpoint.c (bp_location_inserted_here_p): New function,
3092 factored out from ...
3093 (breakpoint_inserted_here_p): ... here. Use
3094 ALL_BP_LOCATIONS_AT_ADDR.
3095 (software_breakpoint_inserted_here_p): Use
3096 bp_location_inserted_here_p and ALL_BP_LOCATIONS_AT_ADDR.
3098 2014-01-09 Pedro Alves <palves@redhat.com>
3100 Skip enabling event reporting if the kernel supports
3102 * linux-thread-db.c: Include "nat/linux-ptrace.h".
3103 (thread_db_use_events): New function.
3104 (try_thread_db_load_1): Check thread_db_use_events before enabling
3106 (update_thread_state): New function.
3107 (attach_thread): Use it. Check thread_db_use_events before
3108 enabling event reporting.
3109 (thread_db_detach): Check thread_db_use_events before disabling
3111 (find_new_threads_callback): Check thread_db_use_events before
3112 enabling event reporting. Update the thread's state if not using
3113 libthread_db events.
3115 2015-01-09 Pedro Alves <palves@redhat.com>
3117 * linux-nat.c (lin_lwp_attach_lwp): Assert that the lwp id we're
3118 about to wait for is > 0.
3119 * linux-thread-db.c (find_new_threads_callback): Ignore thread if
3120 the kernel thread ID is -1.
3122 2015-01-09 Pedro Alves <palves@redhat.com>
3124 * linux-nat.c (attach_proc_task_lwp_callback): New function.
3125 (linux_nat_attach): Use linux_proc_attach_tgid_threads.
3126 (wait_lwp, linux_nat_filter_event): If not set yet, set the lwp's
3127 ptrace option flags.
3128 * linux-nat.h (struct lwp_info) <must_set_ptrace_flags>: New
3130 * nat/linux-procfs.c: Include <dirent.h>.
3131 (linux_proc_get_int): New parameter "warn". Handle it.
3132 (linux_proc_get_tgid): Adjust.
3133 (linux_proc_get_tracerpid): Rename to ...
3134 (linux_proc_get_tracerpid_nowarn): ... this.
3135 (linux_proc_pid_get_state): New function, factored out from
3136 (linux_proc_pid_has_state): ... this. Add new parameter "warn"
3138 (linux_proc_pid_is_gone): New function.
3139 (linux_proc_pid_is_stopped): Adjust.
3140 (linux_proc_pid_is_zombie_maybe_warn)
3141 (linux_proc_pid_is_zombie_nowarn): New functions.
3142 (linux_proc_pid_is_zombie): Use
3143 linux_proc_pid_is_zombie_maybe_warn.
3144 (linux_proc_attach_tgid_threads): New function.
3145 * nat/linux-procfs.h (linux_proc_get_tgid): Update comment.
3146 (linux_proc_get_tracerpid): Rename to ...
3147 (linux_proc_get_tracerpid_nowarn): ... this, and update comment.
3148 (linux_proc_pid_is_gone): New declaration.
3149 (linux_proc_pid_is_zombie): Update comment.
3150 (linux_proc_pid_is_zombie_nowarn): New declaration.
3151 (linux_proc_attach_lwp_func): New typedef.
3152 (linux_proc_attach_tgid_threads): New declaration.
3153 * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason): Adjust to
3154 use nowarn functions.
3155 (linux_ptrace_attach_fail_reason_string): Move here from
3156 gdbserver/linux-low.c and rename.
3157 (ptrace_supports_feature): If the current ptrace options are not
3158 known yet, check them now, instead of asserting.
3159 * nat/linux-ptrace.h (linux_ptrace_attach_fail_reason_string):
3162 2015-01-09 Pedro Alves <palves@redhat.com>
3164 * linux-thread-db.c (thread_db_find_new_threads_silently)
3165 (try_thread_db_load_1, try_thread_db_load, thread_db_load_search)
3166 (find_new_threads_once): Print debug output on gdb_stdlog.
3168 2015-01-09 Chen Gang <gang.chen.5i5j@gmail.com>
3169 Pedro Alves <palves@redhat.com>
3171 * compile/compile.c: Include "gdb_wait.h".
3172 (do_rmdir): Check return value, and free 'zap'.
3174 2015-01-08 Pedro Alves <palves@redhat.com>
3175 Yao Qi <yao@codesourcery.com>
3177 * dwarf2loc.c (indirect_pieced_value): Don't call
3178 gdb_sign_extend. Call extract_signed_integer instead.
3179 * utils.c (gdb_sign_extend): Remove.
3180 * utils.h (gdb_sign_extend): Remove declaration.
3182 2015-01-07 Pierre Muller <muller@sourceware.org>
3185 * stabsread.c (define_symbol): Set language for C++ special symbols.
3187 2015-01-07 Patrick Palka <patrick@parcs.ath.cx>
3189 * inflow.c (initial_gdb_ttystate): Tweak comment.
3191 2015-01-07 Joel Brobecker <brobecker@adacore.com>
3193 * inflow.c (set_initial_gdb_ttystate): Add empty line after
3194 comment documenting function.
3196 2015-01-07 Patrick Palka <patrick@parcs.ath.cx>
3198 * terminal.h (set_initial_gdb_ttystate): Declare.
3199 * inflow.c (initial_gdb_ttystate): New static variable.
3200 (set_initial_gdb_ttystate): New setter.
3201 (child_terminal_init_with_pgrp): Copy initial_gdb_ttystate
3202 instead of our current terminal state.
3203 * top.c (gdb_init): Call set_initial_gdb_ttystate.
3205 2015-01-07 Joel Brobecker <brobecker@adacore.com>
3207 * guile/scm-type.c (tyscm_array_1): Add comment.
3208 * python/py-type.c (typy_array_1): Add comment.
3210 2015-01-06 Joel Brobecker <brobecker@adacore.com>
3212 * guile/scm-type.c (tyscm_array_1): Do not raise out-of-range
3213 error if N2 is equal to N1 - 1.
3215 2015-01-06 Joel Brobecker <brobecker@adacore.com>
3217 * python/py-type.c (typy_array_1): Do not raise negative-length
3218 exception if N2 is equal to N1 - 1.
3220 2015-01-03 Doug Evans <xdje42@gmail.com>
3222 * c-exp.y: Whitespace cleanup.
3223 (classify_inner_name): Remove extra ;.
3225 2015-01-02 Maciej W. Rozycki <macro@codesourcery.com>
3227 * mips-tdep.c (mips32_scan_prologue): Keep the extracted stack
3230 2015-01-02 Doug Evans <dje@google.com>
3232 * dwarf2read.c (setup_type_unit_groups): Remove outdated comment.
3234 2015-01-02 Doug Evans <dje@google.com>
3236 * symtab.h (struct symbol): Fix typo in comment.
3238 2015-01-01 Joel Brobecker <brobecker@adacore.com>
3240 Update year range in copyright notice of all files.
3242 2015-01-01 Joel Brobecker <brobecker@adacore.com>
3244 * top.c (print_gdb_version): Update copyright year to 2015.
3246 2015-01-01 Joel Brobecker <brobecker@adacore.com>
3248 * config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2014.
3250 For older changes see ChangeLog-2014.
3256 version-control: never