[deliverable/binutils-gdb.git] / gdb / ChangeLog

2016-09-18  Pedro Alves  <palves@redhat.com>

        * s390-linux-nat.c: Include <algorithm>.

2016-09-18  Pedro Alves  <palves@redhat.com>

        * breakpoint.c (hardware_watchpoint_inserted_in_range): Explicitly
        specify the std:min/std::max specialization.
        * exec.c (section_table_read_available_memory): Likewise.
        * remote.c (remote_read_qxfer): Likewise.
        * target.c (simple_verify_memory): Likewise.

2016-09-16  Simon Marchi  <simark@simark.ca>

        * infrun.c (restore_current_uiout_cleanup): Move to ui-out.c.
        (print_stop_event): Use make_cleanup_restore_current_uiout.
        * python/python.c (execute_gdb_command): Likewise.
        * ui-out.c (restore_current_uiout_cleanup): Move from infrun.c.
        (make_cleanup_restore_current_uiout): New function definition.
        * ui-out.h (make_cleanup_restore_current_uiout): New function
        declaration.
        * utils.c (do_restore_ui_out): Remove.
        (make_cleanup_restore_ui_out): Remove.
        * utils.h (make_cleanup_restore_ui_out): Remove.

2016-09-16  Pedro Alves  <palves@redhat.com>

        * defs.h (min, max): Delete.
        * aarch64-tdep.c: Include <algorithm> and use std::min and
        std::max throughout.
        * aarch64-tdep.c: Likewise.
        * alpha-tdep.c: Likewise.
        * amd64-tdep.c: Likewise.
        * amd64-windows-tdep.c: Likewise.
        * arm-tdep.c: Likewise.
        * avr-tdep.c: Likewise.
        * breakpoint.c: Likewise.
        * btrace.c: Likewise.
        * ctf.c: Likewise.
        * disasm.c: Likewise.
        * doublest.c: Likewise.
        * dwarf2loc.c: Likewise.
        * dwarf2read.c: Likewise.
        * environ.c: Likewise.
        * exec.c: Likewise.
        * f-exp.y: Likewise.
        * findcmd.c: Likewise.
        * ft32-tdep.c: Likewise.
        * gcore.c: Likewise.
        * hppa-tdep.c: Likewise.
        * i386-darwin-tdep.c: Likewise.
        * i386-tdep.c: Likewise.
        * linux-thread-db.c: Likewise.
        * lm32-tdep.c: Likewise.
        * m32r-tdep.c: Likewise.
        * m88k-tdep.c: Likewise.
        * memrange.c: Likewise.
        * minidebug.c: Likewise.
        * mips-tdep.c: Likewise.
        * moxie-tdep.c: Likewise.
        * nds32-tdep.c: Likewise.
        * nios2-tdep.c: Likewise.
        * nto-procfs.c: Likewise.
        * parse.c: Likewise.
        * ppc-sysv-tdep.c: Likewise.
        * probe.c: Likewise.
        * record-btrace.c: Likewise.
        * remote.c: Likewise.
        * rs6000-tdep.c: Likewise.
        * rx-tdep.c: Likewise.
        * s390-linux-nat.c: Likewise.
        * s390-linux-tdep.c: Likewise.
        * ser-tcp.c: Likewise.
        * sh-tdep.c: Likewise.
        * sh64-tdep.c: Likewise.
        * source.c: Likewise.
        * sparc-tdep.c: Likewise.
        * symfile.c: Likewise.
        * target-memory.c: Likewise.
        * target.c: Likewise.
        * tic6x-tdep.c: Likewise.
        * tilegx-tdep.c: Likewise.
        * tracefile-tfile.c: Likewise.
        * tracepoint.c: Likewise.
        * valprint.c: Likewise.
        * value.c: Likewise.
        * xtensa-tdep.c: Likewise.
        * cli/cli-cmds.c: Likewise.
        * compile/compile-object-load.c: Likewise.

2016-09-16  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * s390-linux-nat.c (PER_BIT, PER_EVENT_BRANCH, PER_EVENT_IFETCH)
        (PER_EVENT_STORE, PER_EVENT_NULLIFICATION)
        (PER_CONTROL_BRANCH_ADDRESS, PER_CONTROL_SUSPENSION)
        (PER_CONTROL_ALTERATION): New macros.
        (struct s390_debug_reg_state) <break_areas>: New member.
        (s390_forget_process): Free break_areas as well.
        (s390_linux_new_fork): Copy break_areas as well.
        (s390_prepare_to_resume): Install hardware breakpoints.
        (s390_can_use_hw_breakpoint): Indicate support for hardware
        breakpoints.
        (s390_insert_hw_breakpoint, s390_remove_hw_breakpoint): New
        linux_nat target methods.
        (_initialize_s390_nat): Register them.

2016-09-16  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * nat/linux-nat.h (lwp_is_stepping): New declaration.
        * linux-nat.c (lwp_is_stepping): New function.

2016-09-16  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * s390-linux-nat.c (gdbcmd.h): New include.
        (s390_show_debug_regs): New function.
        (s390_stopped_by_watchpoint): Call it, if show_debug_regs is set.
        (s390_prepare_to_resume): Likewise.
        (_initialize_s390_nat): Register the command "maint set
        show-debug-regs".

2016-09-16  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * s390-linux-nat.c (watch_areas): Remove variable.  Replace by a
        member of...
        (struct s390_debug_reg_state): ...this.  New struct.
        (struct s390_process_info): New struct.
        (s390_process_list): New variable.
        (s390_find_process_pid, s390_add_process, s390_process_info_get)
        (s390_get_debug_reg_state): New functions.
        (s390_stopped_by_watchpoint): Now access the watch_areas VEC via
        s390_get_debug_reg_state.
        (s390_prepare_to_resume): Likewise.
        (s390_insert_watchpoint): Likewise.
        (s390_remove_watchpoint): Likewise.
        (s390_forget_process, s390_linux_new_fork): New linux_nat target
        methods.
        (_initialize_s390_nat): Register them.

2016-09-16  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * s390-linux-nat.c (s390_watch_area): New typedef.  Define a VEC.
        (watch_base): Remove variable.
        (watch_areas): New variable.
        (s390_stopped_by_watchpoint): Transform operations on the
        watch_base list to equivalent operations on the watch_areas VEC.
        (s390_prepare_to_resume): Likewise.
        (s390_insert_watchpoint): Likewise.
        (s390_remove_watchpoint): Likewise.

2016-09-16  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * s390-linux-nat.c (s390_prepare_to_resume): Use advertised lwp
        functions instead of accessing lwp_info structure members.
        (s390_mark_per_info_changed): New function.
        (s390_new_thread): Use it.
        (s390_refresh_per_info_cb): New function.
        (s390_refresh_per_info): Remove parameter.  Refresh all lwps of
        the current process.
        (s390_insert_watchpoint): Adjust call to s390_refresh_per_info.
        (s390_remove_watchpoint): Likewise.

2016-09-09  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * elfread.c (auxv.h): New include.
        (elf_gnu_ifunc_resolve_addr): Pass HWCAP to ifunc resolver.

2016-09-08  Tom Tromey  <tom@tromey.com>

        * remote.c (remote_notif_stop_ack, remote_wait_as)
        (show_remote_cmd): Remove unneeded casts.

2016-09-06  Pedro Alves  <palves@redhat.com>

        * top.c (wait_sync_command_done): Don't assume current_ui doesn't
        change across events.  Restore the current UI before returning.
        (gdb_readline_wrapper): Restore the current UI before returning.

2016-09-06  Pedro Alves  <palves@redhat.com>

        * event-top.c (restore_ui_cleanup): Now static.
        (make_cleanup_restore_current_ui): New function.
        (switch_thru_all_uis_init): Use it.
        * infcall.c (call_thread_fsm_should_stop): Use it.
        * infrun.c (fetch_inferior_event): Use it.
        * top.c (new_ui_command): Use it.
        * top.h (restore_ui_cleanup): Delete declaration.
        (make_cleanup_restore_current_ui): New declaration.

2016-09-05  Ulrich Weigand  <uweigand@de.ibm.com>

        * i386-tdep.c (i386_floatformat_for_type): New function.
        (i386_gdbarch_init): Install it.
        * ppc-linux-tdep.c (ppc_floatformat_for_type): New function.
        (ppc_linux_init_abi): Install it.

2016-09-05  Ulrich Weigand  <uweigand@de.ibm.com>

        * gdbarch.sh (floatformat_for_type): New gdbarch callback.
        * gdbarch.h, gdbarch.c: Re-generate.
        * arch-utils.h (default_floatformat_for_type): New prototype.
        * arch-utils.c (default_floatformat_for_type): New function.

        * doublest.c (floatformat_from_length): Remove.
        (floatformat_from_type): Assume TYPE_FLOATFORMAT is non-NULL.
        * gdbtypes.c (verify_floatformat): Require non-NULL format.

        * dwarf2read.c (dwarf2_init_float_type): New function.
        (read_base_type): Use it.
        * stabsread.c (dbx_init_float_type): New function.
        (read_sun_floating_type): Use it.
        (read_range_type): Likewise.

2016-09-05  Ulrich Weigand  <uweigand@de.ibm.com>

        * ada-lang.c (ada_language_arch_info): Use gdbarch-provided
        platform ABI floating-point formats for built-in types.
        * d-lang.c (build_d_types): Likewise.
        * f-lang.c (build_fortran_types): Likewise.
        * m2-lang.c (build_m2_types): Likewise.
        * mdebugread.c (basic_type): Likewise.

        * go-lang.c (build_go_types): Use IEEE floating-point formats
        for language built-in types as mandanted by the language.
        * jv-lang.c (build_java_types): Likewise.
        * rust-lang.c (rust_language_arch_info): Likewise.
        * stabsread.c (rs6000_builtin_type): Likewise.

2016-09-05  Ulrich Weigand  <uweigand@de.ibm.com>

        * gdbtypes.c (init_type): Remove "char" special case.
        (arch_integer_type): Likewise.
        (gdbtypes_post_init): Set TYPE_NOSIGN for "char" type.
        (objfile_type): Likewise.
        * mdebugread.c (basic_type): Likewise.
        * stabsread.c (rs6000_builtin_type): Likewise.

2016-09-05  Ulrich Weigand  <uweigand@de.ibm.com>

        * gdbtypes.h (enum type_flag_value): Remove.
        Remove references to TYPE_FLAG_... in comments throughout.
        * gdbtypes.c (recursive_dump_type): Do not print TYPE_FLAG_... 
        flags, print the corresponding TYPE_... access macro names.
        Remove references to TYPE_FLAG_... in comments throughout.
        * infcall.c: Remove references to TYPE_FLAG_... in comments.
        * valprint.c: Likewise.
        * gdb-gdb.py (class TypeFlag): No longer consider TYPE_FLAG_...
        values, only TYPE_INSTANCE_FLAG_... values.
        (class TypeFlagsPrinter): Likewise.

2016-09-05  Ulrich Weigand  <uweigand@de.ibm.com>

        * gdbtypes.h (init_type): Remove FLAGS argument.  Move OBJFILE
        argument to first position.
        (init_integer_type): New prototype.
        (init_character_type): Likewise.
        (init_boolean_type): Likewise.
        (init_float_type): Likewise.
        (init_decfloat_type): Likewise.
        (init_complex_type): Likewise.
        (init_pointer_type): Likewise.
        * gdbtypes.c (verify_floatflormat): New function.
        (init_type): Remove FLAGS argument and processing.  Move OBJFILE
        argument to first position.
        (init_integer_type): New function.
        (init_character_type): Likewise.
        (init_boolean_type): Likewise.
        (init_float_type): Likewise.
        (init_decfloat_type): Likewise.
        (init_complex_type): Likewise.
        (init_pointer_type): Likewise.
        (arch_float_type): Use verify_floatflormat.
        (objfile_type): Use init_..._type helpers instead of calling
        init_type directly.
        * dwarf2read.c (fixup_go_packaging): Update to changed init_type
        prototype.
        (read_namespace_type): Likewise.
        (read_module_type): Likewise.
        (read_typedef): Likewise.
        (read_unspecified_type): Likewise.
        (build_error_marker_type): Likewise.
        (read_base_type): Use init_..._type helpers.
        * mdebugread.c (basic_type): Use init_..._type helpers.
        (parse_type): Update to changed init_type prototype.
        (cross_ref): Likewise.
        * stabsread.c (rs6000_builtin_type): Use init_..._type helpers.
        (read_sun_builtin_type): Likewise.
        (read_sun_floating_type): Likewise.
        (read_range_type): Likewise.  Also update to changed init_type
        prototype.

2016-09-05  Ulrich Weigand  <uweigand@de.ibm.com>

        * gdbtypes.h (arch_decfloat_type): New prototype.
        (arch_pointer_type): Likewise.
        * gdbtypes.c (arch_decfloat_type): New function.
        (arch_pointer_type): Likewise.
        (gdbtypes_post_init): Use arch_decfloat_type.
        * avr-tdep.c (avr_gdbarch_init): Use arch_pointer_type.
        * ft32-tdep.c (ft32_gdbarch_init): Likewise.
        * m32c-tdep.c (make_types): Likewise.
        * rl78-tdep.c (rl78_gdbarch_init): Likewise.

2016-09-05  Ulrich Weigand  <uweigand@de.ibm.com>

        * gdbtypes.c (set_type_code): New function.
        (init_type, arch_type): Use it.

2016-09-05  Ulrich Weigand  <uweigand@de.ibm.com>

        * ada-lang.c (ada_language_arch_info): Use gdbarch_long_double_bit
        instead of gdbarch_double_bit for "long_long_float".

2016-09-05  Pedro Alves  <palves@redhat.com>

        * NEWS: Mention that a C++ compiler is now required.
        * Makefile.in (COMPILER, COMPILER_CFLAGS): Remove.
        (COMPILE.pre, CC_LD): Use CXX directly.
        (INTERNAL_CFLAGS_BASE): Use CXXFLAGS directly.
        * acinclude.m4: Don't include build-with-cxx.m4.
        * build-with-cxx.m4: Delete file.
        * configure.ac: Remove GDB_AC_BUILD_WITH_CXX call.
        * warning.m4: Assume $enable_build_with_cxx is yes.
        * configure: Regenerate.

2016-09-05  Pedro Alves  <palves@redhat.com>

        PR backtrace/19927
        * frame.c (get_frame_id): Compute the frame id if not computed
        yet.
        (unwind_to_current_frame): Delete.
        (get_current_frame): Use get_prev_frame_always_1 to get the
        current frame and assert that that always succeeds.
        (get_prev_frame_if_no_cycle): Skip cycle detection if returning
        the current frame.

2016-09-02  Tom Tromey  <tom@tromey.com>

        PR gdb/11616:
        * dwarf2read.c (decode_locdesc): Handle DW_OP_form_tls_address.
        * dwarf2loc.c (dwarf2_compile_expr_to_ax): Handle
        DW_OP_form_tls_address.
        (locexpr_describe_location_piece): Likewise.
        * dwarf2expr.h (struct dwarf_expr_context_funcs): Update comment.
        * dwarf2expr.c (execute_stack_op): Handle DW_OP_form_tls_address.
        (ctx_no_get_tls_address): Mention DW_OP_form_tls_address.
        * compile/compile-loc2c.c (struct insn_info): Update comment.
        (compute_stack_depth_worker): Handle DW_OP_form_tls_address.

2016-09-01  Sergio Durigan Junior  <sergiodj@redhat.com>

        * target.c (target_wait): Mention that the function's prototype
        can be found at target/target.h.
        * target.h (target_wait): Move prototype from here...
        * target/target.h (target_wait): ... to here.

2016-09-01  Sergio Durigan Junior  <sergiodj@redhat.com>

        * fork-child.c (startup_inferior): Replace calls to target_resume
        by target_continue{,_no_signal}, depending on the case.
        * linux-nat.c (cleanup_target_stop): Call
        target_continue_no_signal instead of target_resume.
        * procfs.c (procfs_wait): Likewise.
        * target.c (target_continue): New function.
        * target/target.h (target_continue): New prototype.

2016-08-31  Yao Qi  <yao.qi@linaro.org>

        * record-full.c (record_full_insert_breakpoint): Fix typo.

2016-08-30  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * thread.c (tp_array_compar): Insert missing parentheses.

2016-08-25  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * xtensa-tdep.h (XTENSA_GDBARCH_TDEP_INSTANTIATE): Replace
        designated initializer list by plain initializer list, for C++
        compliance.

2016-08-25  Adhemerval Zanella  <adhemerval.zanella@linaro.org>

        * aarch64-linux-nat.c (ps_get_thread_area): Remove const from
        struct ps_prochandle.
        * amd64-linux-nat.c (ps_get_thread_area): Likewise.
        * arm-linux-nat.c (ps_get_thread_area): Likewise.
        * gdb_proc_service.h (ps_get_thread_area): Likewise.
        * i386-linux-nat.c (ps_get_thread_area): Likewise.
        * m68klinux-nat.c (ps_get_thread_area): Likewise.
        * mips-linux-nat.c (ps_get_thread_area): Likewise.
        * nat/aarch64-linux.c (aarch64_ps_get_thread_area): Likewise.
        * nat/aarch64-linux.h (aarch64_ps_get_thread_area): Likewise.
        * xtensa-linux-nat.c (ps_get_thread_area): Likewise.

2016-08-24  Simon Marchi  <simon.marchi@ericsson.com>

        * infcmd.c (set_inferior_io_terminal): Set inferior terminal to
        NULL if terminal_name is an empty string.
        (_initialize_infcmd): Make the argument of "set inferior-tty"
        optional, mention it in the help doc.

2016-08-24  Carl Love  <cel@us.ibm.com>

        * rs6000-tdep.c (rs6000_gdbarch_init): Remove call
        set_gdbarch_deprecated_fp_regnum() architecture
        initialization function.

2016-08-23  Simon Marchi  <simon.marchi@ericsson.com>

        * stack.c (parse_frame_specification): Fix typo in comment.

2016-08-23  Pedro Alves  <palves@redhat.com>

        PR gdb/20494
        * inflow.c (our_terminal_info, initial_gdb_ttystate): Update
        comments.
        (enum gdb_has_a_terminal_flag_enum, gdb_has_a_terminal_flag):
        Delete.
        (set_initial_gdb_ttystate): Record our_terminal_info here too,
        instead of ...
        (gdb_has_a_terminal): ... here.  Reimplement in terms of
        initial_gdb_ttystate.  Make static.
        * terminal.h (gdb_has_a_terminal): Delete declaration.
        (set_initial_gdb_ttystate): Add comment.
        * top.c (show_interactive_mode): Use input_interactive_p instead
        of gdb_has_a_terminal.

2016-08-22  Pedro Alves  <palves@redhat.com>

        PR gdb/20505
        * linux-tdep.c (linux_vsyscall_range_raw): For core inferiors,
        find the vDSO's start address with AT_SYSINFO_EHDR too, and
        determine the vDSO's size by finding the PT_LOAD segment that
        matches AT_SYSINFO_EHDR.

2016-08-19  Yao Qi  <yao.qi@linaro.org>

        * aarch64-tdep.c (aarch64_analyze_prologue): Handle register
        based STP instruction.

2016-08-19  Yao Qi  <yao.qi@linaro.org>

        * completer.c (linespec_location_completer): Make file_to_match
        null-terminated.

2016-08-19  Pedro Alves  <palves@redhat.com>

        * amd64-tdep.c (amd64_relocate_instruction) <callq>: Handle return
        addresses over 0x7fffffff.

2016-08-18  Carl Love  <cel@us.ibm.com>

        * MAINTANERS Write After Approval): Add "Carl Love".

2016-08-18  Edjunior Barbosa Machado  <emachado@linux.vnet.ibm.com>

        * rs6000-tdep.c (ppc_process_record_op31): Handle HTM instructions.

2016-08-17  Simon Marchi  <simon.marchi@ericsson.com>

        * inferior.c (remove_inferior_command): Fix error message.

2016-08-17  Simon Marchi  <simon.marchi@ericsson.com>

        * inferior.c (exit_inferior_1): Remove comment.

2016-08-15  Matthew Wahab  <matthew.wahab@arm.com>

        PR gdb/20457
        * gdb_proc_service.h: Add an include of gregset.h
        [!HAVE_PROC_SERVICE_H]: Remove the include of gregset.h.

2016-08-15  Yao Qi  <yao.qi@linaro.org>

        * location.c (explicit_location_lex_one): Compare the return
        value of strncmp with zero.  Don't check (*inp)[9].  Increment
        *inp by 8.

2016-08-11  Pedro Alves  <palves@redhat.com>

        PR gdb/20413
        * nat/linux-ptrace.c: Include <sys/procfs.h> instead of
        "gregset.h".

2016-08-10  Pedro Alves  <palves@redhat.com>

        PR gdb/19187
        * record-full.c (record_full_remove_breakpoint): Don't remove the
        breakpoint from the record_full_breakpoints VEC if we're detaching
        the breakpoint from a fork child.

2016-08-10  Pedro Alves  <palves@redhat.com>

        PR gdb/19187
        * break-catch-sig.c (signal_catchpoint_remove_location): Adjust
        interface.
        * break-catch-syscall.c (remove_catch_syscall):
        * breakpoint.c (enum remove_bp_reason): Moved to breakpoint.h.
        (remove_breakpoint_1): Pass 'reason' down.
        (remove_catch_fork, remove_catch_vfork, remove_catch_solib)
        (remove_catch_exec, remove_watchpoint, remove_masked_watchpoint)
        (base_breakpoint_remove_location, bkpt_remove_location)
        (bkpt_probe_remove_location, bkpt_probe_remove_location): Adjust
        interface.
        * breakpoint.h (enum remove_bp_reason): Moved here from
        breakpoint.c.
        (struct breakpoint_ops) <remove_location>: Add 'reason' parameter.
        * corelow.c (core_remove_breakpoint): New function.
        (init_core_ops): Install it as to_remove_breakpoint method.
        * exec.c (exec_remove_breakpoint): New function.
        (init_exec_ops): Install it as to_remove_breakpoint method.
        * mem-break.c (memory_remove_breakpoint): Adjust interface.
        * record-btrace.c (record_btrace_remove_breakpoint): Adjust
        interface.
        * record-full.c (record_full_remove_breakpoint)
        (record_full_core_remove_breakpoint): Adjust interface.
        * remote.c (remote_remove_breakpoint): Adjust interface.
        * target-debug.h (target_debug_print_enum_remove_bp_reason): New
        macro.
        * target-delegates.c: Regenerate.
        * target.c (target_remove_breakpoint): Add 'reason' parameter.
        * target.h (struct target_ops) <to_remove_breakpoint>: Add
        'reason' parameter.
        (target_remove_breakpoint, memory_remove_breakpoint): Add 'reason'
        parameter.

2016-08-10  Pedro Alves  <palves@redhat.com>

        PR gdb/19187
        * breakpoint.c (insertion_state_t): Delete.
        (enum remove_bp_reason): New.
        (detach_breakpoints, remove_breakpoint_1, remove_breakpoint):
        Adjust to use enum remove_bp_reason instead of insertion_state_t.

2016-08-10  Pedro Alves  <palves@redhat.com>

        PR gdb/19187
        * breakpoint.c (remove_breakpoint): Remove 'is' parameter and
        always pass mark_uninserted to remove_breakpoint_1.
        (insert_breakpoint_locations, remove_breakpoints)
        (remove_breakpoints_pid, update_global_location_list): Update
        callers.

2016-08-10  Руслан Ижбулатов  <lrn1986@gmail.com>
            Pedro Alves  <palves@redhat.com>

        * windows-nat.c (MS_VC_EXCEPTION): New define.
        (handle_exception_result): New enum.
        (windows_delete_thread): Free the thread's name.
        (handle_exception): Handle MS_VC_EXCEPTION.
        (get_windows_debug_event): Handle HANDLE_EXCEPTION_IGNORED.
        (windows_thread_name): New function.
        (windows_target): Install it as to_thread_name method.
        * NEWS: Mention the thread naming support on MS-Windows.

2016-08-10  Pedro Alves  <palves@redhat.com>

        * common/signals-state-save-restore.c
        (save_original_signals_state, restore_original_signals_state):
        Wrap perror_with_name arguments with '()'.

2016-08-09  Pedro Alves  <palves@redhat.com>

        PR gdb/20418
        * event-top.c (ui_register_input_event_handler)
        (ui_unregister_input_event_handler): New functions.
        (async_enable_stdin): Register input in the event loop.
        (async_disable_stdin): Unregister input from the event loop.
        (gdb_setup_readline): Register input in the event loop.
        * infrun.c (check_curr_ui_sync_execution_done): Register input in
        the event loop.
        * target.c (target_terminal_inferior): Don't unregister input from
        the event loop.
        (target_terminal_ours): Don't register input in the event loop.
        * target.h (target_terminal_inferior)
        (target_terminal_ours_for_output, target_terminal_ours): Update
        comments.
        * top.h (ui_register_input_event_handler)
        (ui_unregister_input_event_handler): New declarations.
        * utils.c (ui_unregister_input_event_handler_cleanup)
        (prepare_to_handle_input): New functions.
        (defaulted_query, prompt_for_continue): Use
        prepare_to_handle_input.

2016-08-09  Pedro Alves  <palves@redhat.com>

        PR mi/20431
        * mi/mi-main.c (mi_execute_command): Enable input and set prompt
        state to PROMPT_NEEDED.

2016-08-09  Pedro Alves  <palves@redhat.com>

        PR gdb/18653
        * Makefile.in (SFILES): Add
        common/signals-state-save-restore.c.
        (HFILES_NO_SRCDIR): Add common/signals-state-save-restore.h.
        (COMMON_OBS): Add signals-state-save-restore.o.
        (signals-state-save-restore.o): New rule.
        * configure: Regenerate.
        * fork-child.c: Include "signals-state-save-restore.h".
        (fork_inferior): Call restore_original_signals_state.
        * main.c: Include "signals-state-save-restore.h".
        (captured_main): Call save_original_signals_state.
        * common/common.m4: Add sigaction to AC_CHECK_FUNCS checks.
        * common/signals-state-save-restore.c: New file.
        * common/signals-state-save-restore.h: New file.

2016-08-09  Pedro Alves  <palves@redhat.com>

        * value.c (unpack_value_bitfield): Skip unpacking if the parent
        has no contents buffer to begin with.

2016-08-08  Pedro Alves  <palves@redhat.com>

        * features/i386/amd64-avx-mpx-linux.c: Regenerate.
        * features/i386/amd64-avx-mpx.c: Regenerate.
        * features/i386/i386-avx-mpx-linux.c: Regenerate.
        * features/i386/i386-avx-mpx.c: Regenerate.

2016-08-05  Simon Marchi  <simon.marchi@ericsson.com>

        * event-top.h (cli_command_loop): Remove.

2016-08-05  Pedro Alves  <palves@redhat.com>

        PR remote/20398
        * remote-fileio.c (remote_fileio_quit_handler): Check the quit
        flag before calling quit.

2016-08-05  Pedro Alves  <palves@redhat.com>

        * NEWS: Mention that GDB and GDBserver build with a C++ compiler
        by default.

2016-08-05  Pedro Alves  <palves@redhat.com>

        * build-with-cxx.m4: Change help string to be in terms of
        --disable-build-with-cxx.
        * configure: Regenerate.

2016-08-04  Yao Qi  <yao.qi@linaro.org>

        * aarch64-linux-nat.c (tdesc_arm_with_vfpv3): Remove the
        declaration.
        (aarch64_linux_read_description): Remove code on getting
        auxv and select target description on it.  Select target
        description by the result of NT_ARM_VFP ptrace request.

2016-08-03  Tom Tromey  <tom@tromey.com>

        PR python/18565:
        * python/py-frame.c (frapy_function): Use find_frame_funname.

2016-08-03  Tom Tromey  <tom@tromey.com>

        * stack.c (find_frame_funname): Avoid any possible leak in case
        cp_remove_params can throw.

2016-08-03  Tom Tromey  <tom@tromey.com>

        * NEWS: Mention new Python breakpoint events.

2016-08-02  Tom Tromey  <tom@tromey.com>

        * MAINTAINERS (Core): Add self as Rust maintainer.

2016-08-01  Joel Brobecker  <brobecker@adacore.com>

        * NEWS: Create a new section for the next release branch.
        Rename the section of the current branch, now that it has
        been cut.

2016-08-01  Joel Brobecker  <brobecker@adacore.com>

        GDB 7.12 branch created (41bfcd638a4e0e48b96ce4de2845372dea481322):
        * version.in: Bump version to 7.12.50.DATE-git.

2016-07-27  Alan Modra  <amodra@gmail.com>

        * amd64-darwin-tdep.c: Don't include libbfd.h.
        * i386-darwin-tdep.c: Likewise.
        * rs6000-nat.c: Likewise.
        * rs6000-tdep.c: Likewise.

2016-07-26  Tom Tromey  <tom@tromey.com>

        * symtab.c (register_symbol_computed_impl): Update.
        PR python/20190:
        * value.h (symbol_read_needs): Declare.
        (symbol_read_needs_frame): Add comment.
        * symtab.h (struct symbol_computed_ops) <read_variable>: Update
        comment.
        <get_symbol_read_needs>: Rename.  Change return type.
        * findvar.c (symbol_read_needs): New function.
        (symbol_read_needs_frame): Rewrite.
        (default_read_var_value): Use symbol_read_needs.
        * dwarf2loc.c (struct symbol_needs_baton): Rename.
        <needs>: Renamed from needs_frame.  Changed type.
        (needs_frame_read_addr_from_reg, symbol_needs_get_reg_value)
        (symbol_needs_read_mem, symbol_needs_frame_base)
        (symbol_needs_frame_cfa, symbol_needs_tls_address)
        (symbol_needs_dwarf_call): Rename.
        (needs_dwarf_reg_entry_value): Update.
        (symbol_needs_ctx_funcs, dwarf2_loc_desc_get_symbol_read_needs):
        Rename and update.
        (locexpr_get_symbol_read_needs, loclist_symbol_needs): Likewise.
        (dwarf2_locexpr_funcs, dwarf2_loclist_funcs): Update.
        * defs.h (enum symbol_needs_kind): New.

2016-07-26  Pedro Alves  <palves@redhat.com>

        * nat/linux-ptrace.c: Include "gregset.h".
        (linux_ptrace_test_ret_to_nx): Use PTRACE_GETREGS instead of
        PTRACE_PEEKUSER.

2016-07-26  Pedro Alves  <palves@redhat.com>

        * amd64-linux-nat.c (amd64_linux_siginfo_fixup): Rename 'native'
        parameter to 'ptrace'.
        * nat/amd64-linux-siginfo.c (GDB_SI_SIZE): New define.
        (nat_uptr_t): New an unsigned long.
        (nat_clock_t): Remove attribute __aligned__.
        (struct nat_timeval): Delete.
        (nat_siginfo_t): Remove attribute __aligned__.
        (ptrace_siginfo_t): Define.
        (compat_siginfo_from_siginfo, siginfo_from_compat_siginfo)
        (compat_x32_siginfo_from_siginfo)
        (siginfo_from_compat_x32_siginfo): Make 'from' parameter const.
        Convert through a ptrace_siginfo_t instead of a nat_siginfo_t.
        Remove casts.
        (amd64_linux_siginfo_fixup_common): Rename 'native' parameter to
        'ptrace'.  Remove static assertions.
        (top level): New static assertions.

2016-07-25  Simon Marchi  <simon.marchi@ericsson.com>

        * top.h (make_delete_ui_cleanup): New declaration.
        * top.c (delete_ui_cleanup): New function.
        (make_delete_ui_cleanup): New function.
        (new_ui_command): Create restore_ui cleanup earlier, create a
        delete_ui cleanup and discard it on success.

2016-07-25  Pedro Alves  <palves@redhat.com>
            Jan Kratochvil  <jan.kratochvil@redhat.com>

        * nat/linux-procfs.c (parse_proc_status_state): Handle lowercase
        't'.

2016-07-25  Pedro Alves  <palves@redhat.com>

        * nat/linux-procfs.c (enum proc_state): New enum.
        (parse_proc_status_state): New function.
        (linux_proc_pid_get_state): Replace output string buffer parameter
        with an output proc_state parameter.  Use parse_proc_status_state.
        (linux_proc_pid_is_gone): Adjust to use proc_state values.
        (linux_proc_pid_has_state): Change type of 'state' parameter; now
        an enum proc_state.  Adjust to linux_proc_pid_get_state interface
        change.
        (linux_proc_pid_is_stopped)
        (linux_proc_pid_is_trace_stopped_nowarn)
        (linux_proc_pid_is_zombie_maybe_warn): Adjust to
        linux_proc_pid_get_state interface change.

2016-07-25  Tim Wiederhake  <tim.wiederhake@intel.com>

        * MAINTAINERS (Write After Approval): Add Tim Wiederhake

2016-07-25  Tim Wiederhake  <tim.wiederhake@intel.com>

        * NEWS: Resume btrace on reconnect.
        * record-btrace.c: Added record-btrace.h include.
        (record_btrace_open): Split into this and ...
        (record_btrace_push_target): ... this.
        (record_btrace_disconnect): New function.
        (init_record_btrace_ops): Use record_btrace_disconnect.
        * record-btrace.h: New file.
        * remote.c: Added record-btrace.h include.
        (remote_start_remote): Check recording status.
        (remote_btrace_maybe_reopen): New function.

2016-07-23  Gabriel Krisman Bertazi  <gabriel@krisman.be>

        * xml-syscall.c (get_syscalls_by_group): New.
        (get_syscall_group_names): New.
        (struct syscall_group_desc): New structure to store group data.
        (struct syscalls_info): Include field to store the group list.
        (sysinfo_free_syscall_group_desc): New.
        (free_syscalls_info): Free group list.
        (syscall_group_create_syscall_group_desc): New.
        (syscall_group_add_syscall): New.
        (syscall_create_syscall_desc): Add syscall to its groups.
        (syscall_start_syscall): Load group attribute.
        (syscall_group_get_group_by_name): New.
        (xml_list_syscalls_by_group): New.
        (xml_list_of_groups): New.
        * xml-syscall.h (get_syscalls_by_group): Export function
        to retrieve a list of syscalls filtered by the group name.
        (get_syscall_group_names): Export function to retrieve the list
        of syscall groups.
        * break-catch-syscall.c (catch_syscall_split_args): Verify if
        argument is a syscall group and expand it to a list of syscalls
        when creating catchpoints.
        (catch_syscall_completer): Add word completion for system call
        groups.
        * configure.ac: Include dependency for xsltproc when building
        in maintainer-mode.
        * break-catch-syscall.c (_initialize_breakpoint): Update catch
        syscall command documentation.
        * NEWS: Include section about catching groups of syscalls.
        * configure: Regenerate.
        * data-directory/Makefile.in: Generate syscall xml when building
        in maintainer mode.
        * syscalls/gdb-syscalls.dtd: Include group attribute to the
        syscall element.
        * syscalls/apply-defaults.xsl: New.
        * syscalls/linux-defaults.xml.in: New.
        * syscalls/aarch64-linux.xml: Rename to aarch64-linux.xml.in.
        * syscalls/amd64-linux.xml: Rename to amd64-linux.xml.in.
        * syscalls/arm-linux.xml: Rename to arm-linux.xml.in.
        * syscalls/bfin-linux.xml: Rename to bfin-linux.xml.in.
        * syscalls/i386-linux.xml: Rename to i386-linux.xml.in.
        * syscalls/mips-n32-linux.xml: Rename to mips-n32-linux.xml.in.
        * syscalls/mips-n64-linux.xml: Rename to mips-n64-linux.xml.in.
        * syscalls/mips-o32-linux.xml: Rename to mips-o32-linux.xml.in.
        * syscalls/ppc-linux.xml: Rename to ppc-linux.xml.in.
        * syscalls/ppc64-linux.xml: Rename to ppc64-linux.xml.in.
        * syscalls/s390-linux.xml: Rename to s390-linux.xml.in.
        * syscalls/s390x-linux.xml: Rename to s390x-linux.xml.in.
        * syscalls/sparc-linux.xml: Rename to sparc-linux.xml.in.
        * syscalls/sparc64-linux.xml: Rename to sparc64-linux.xml.in.
        * syscalls/aarch64-linux.xml: Regenerate.
        * syscalls/amd64-linux.xml: Regenerate.
        * syscalls/arm-linux.xml: Regenerate.
        * syscalls/i386-linux.xml: Regenerate.
        * syscalls/mips-n32-linux.xml: Regenerate.
        * syscalls/mips-n64-linux.xml: Regenerate.
        * syscalls/mips-o32-linux.xml: Regenerate.
        * syscalls/ppc-linux.xml: Regenerate.
        * syscalls/ppc64-linux.xml: Regenerate.
        * syscalls/s390-linux.xml: Regenerate.
        * syscalls/s390x-linux.xml: Regenerate.
        * syscalls/sparc-linux.xml: Regenerate.
        * syscalls/sparc64-linux.xml: Regenerate.

2016-07-23  Andrew Pinski  <apinski@cavium.com>

        * nat/aarch64-linux-hw-point.c
        (aarch64_linux_get_debug_reg_capacity): Handle
        ARMv8.1 and ARMv8.2 debug versions.
        * nat/aarch64-linux-hw-point.h
        (AARCH64_DEBUG_ARCH_V8_1): New define.
        (AARCH64_DEBUG_ARCH_V8_2): New define.

2016-06-30  Руслан Ижбулатов  <lrn1986@gmail.com>

        PR gdb/14529
        * windows-nat.c (signal_event_command): New command 'signal-event'
        for W32 JIT debug support.
        * NEWS: Add an entry about the new 'signal-event' command.

2016-07-22  Tom Tromey  <tom@tromey.com>

        PR rust/20162:
        * dwarf2read.c (scan_partial_symbols) <DW_TAG_structure_type>:
        Call scan_partial_symbols for children when reading a Rust CU.
        (dwarf2_physname): Ignore invalid DW_AT_linkage_name generated by
        rustc.
        (process_structure_scope) <DW_TAG_subprogram>: Call
        read_func_scope for Rust.

2016-07-22  Yao Qi  <yao.qi@linaro.org>

        * ctf.c (ctf_traceframe_info): Call bt_ctf_get_uint64 rather than
        bt_ctf_get_int64.

2016-07-21  Tom Tromey  <tom@tromey.com>

        * rust-lang.c (rust_tuple_struct_type_p): Return false for empty
        structs.
        * rust-exp.y (struct_expr_list): Allow empty elements.

2016-07-21  Tom Tromey  <tom@tromey.com>

        * configure: Rebuild.
        * warning.m4 (AM_GDB_WARNINGS) <build_warnings>: Add
        -Wunused-but-set-parameter, -Wunused-but-set-variable.

2016-07-21  Pedro Alves  <palves@redhat.com>

        * go32-nat.c (go32_create_inferior): Add cast.
        * ser-go32.c (dos_noop): Delete.
        (dos_flush_output, dos_setparity, dos_drain_output): New
        functions.
        (dos_write): Add cast.
        (dos_ops): Use dos_flush_output, dos_setparity and
        dos_drain_output.
        * top.c (do_chdir_cleanup): Add cast.

2016-07-21  Pedro Alves  <palves@redhat.com>

        * windows-nat.c (handle_exception): Remove "th".

2016-07-21  Pedro Alves  <palves@redhat.com>

        * varobj.c (varobj_value_get_print_value): Move "gdbarch" to block
        scope that uses it.

2016-07-20  John Baldwin  <jhb@FreeBSD.org>

        * fbsd-nat.c (fbsd_enable_proc_events): Enable "PTRACE_VFORK"
        events.
        (fbsd_pending_vfork_done): Only define if "PTRACE_VFORK" is not
        defined.
        (fbsd_add_vfork_done): Likewise.
        (fbsd_is_vfork_done_pending): Likewise.
        (fbsd_next_vfork_done): Likewise.
        (fbsd_resume): Only ignore pending vfork done events if
        "PTRACE_VFORK" is not defined.
        (fbsd_wait): Only look for pending vfork done events if
        "PTRACE_VFORK" is not defined.
        [PTRACE_VFORK]: Handle "PL_FLAG_VFORKED" and "PL_FLAG_VFORK_DONE"
        events.
        (fbsd_follow_fork): Only fake a vfork done event if "PTRACE_VFORK"
        is not defined.

2016-07-20  John Baldwin  <jhb@FreeBSD.org>

        * fbsd-nat.c (fbsd_wait): Use "fbsd_enable_proc_events" on
        new child processes.

2016-07-20  John Baldwin  <jhb@FreeBSD.org>

        * fbsd-nat.c (fbsd_enable_lwp_events): Remove function.
        (fbsd_enable_proc_events): New function.
        (fbsd_enable_follow_fork): Remove function.
        (fbsd_post_startup_inferior): Use "fbsd_enable_proc_events".
        (fbsd_post_attach): Likewise.

2016-07-15  John Baldwin  <jhb@FreeBSD.org>

        * common/signals.c (gdb_signal_from_host): Handle SIGLIBRT.
        (do_gdb_signal_to_host): Likewise.
        * infrun.c (_initialize_infrun): Pass GDB_SIGNAL_LIBRT through to
        programs.
        * proc-events.c (signal_table): Add entry for SIGLIBRT.

2016-07-14  Tom Tromey  <tom@tromey.com>

        * python/py-breakpoint.c (gdbpy_breakpoint_deleted): Add missing
        newline.

2016-07-14  Tom Tromey  <tom@tromey.com>

        * mips-tdep.c (micromips_scan_prologue): Remove "frame_addr".
        (mips_o32_push_dummy_call): Remove "stack_used_p".
        * aarch64-tdep.c (aarch64_record_data_proc_imm): Remove
        "insn_bit28".
        * rust-lang.c (rust_print_type): Remove "len".
        * rust-exp.y (super_name): Remove "current_len".
        * python/py-framefilter.c (py_print_type): Remove "type".
        * mdebugread.c (parse_partial_symbols): Remove
        "past_first_source_file".
        <N_SO>: Remove "valu", "first_so_symnum", "prev_textlow_not_set".
        * m2-valprint.c (m2_print_unbounded_array): Remove
        "content_type".
        (m2_val_print): Remove "i".
        * linespec.c (unexpected_linespec_error): Remove "cleanup".
        * f-valprint.c (f_val_print): Remove "i".
        * elfread.c (elf_symtab_read): Remove "offset".
        * dwarf2-frame.c (dwarf2_fetch_cfa_info): Remove "addr_size".
        * jit.c (jit_dealloc_cache): Remove "i" and "frame_arch".

2016-07-14  Tom Tromey  <tom@tromey.com>

        * arch-utils.c (default_skip_permanent_breakpoint): Remove
        "bp_insn".
        * disasm.c (do_assembly_only): Remove "num_displayed".
        * dwarf2read.c (read_abbrev_offset): Remove "length".
        (dwarf_decode_macro_bytes) <DW_MACINFO_vendor_ext>: Remove
        "constant".
        * m32c-tdep.c (make_regs): Remove "r2hl", "r3hl", and "intbhl".
        * microblaze-tdep.c (microblaze_frame_cache): Remove "func".
        * tracefile.c (trace_save): Remove "status".

2016-07-14  Tom Tromey  <tom@tromey.com>

        * symfile.c (simple_overlay_update_1): Remove initialization
        of "size", and commented-out code.
        (simple_overlay_update): Likewise.

2016-07-14  Tom Tromey  <tom@tromey.com>

        * tui/tui-winsource.c (tui_show_source_line): Use getcurx.
        * tui/tui-io.c (tui_puts): Use getcurx.
        (tui_redisplay_readline): Likewise.

2016-07-14  Tom Tromey  <tom@tromey.com>

        * inflow.c (child_terminal_ours_1): Use ATTRIBUTE_UNUSED.

2016-07-14  Tom Tromey  <tom@tromey.com>

        * corefile.c (reopen_exec_file): Only examine st.st_mtime if stat
        succeeded.

2016-07-13  Tom Tromey  <tom@tromey.com>

        PR python/15620, PR python/18620:
        * python/py-evts.c (gdbpy_initialize_py_events): Call
        add_new_registry for new events.
        * python/py-events.h (events_object) <breakpoint_created,
        breakpoint_deleted, breakpoint_modified>: New fields.
        * python/py-breakpoint.c (gdbpy_breakpoint_created): Emit the
        breakpoint changed event.
        (gdbpy_breakpoint_deleted): Emit the breakpoint deleted event.
        (gdbpy_breakpoint_modified): New function.
        (gdbpy_initialize_breakpoints): Attach to the breakpoint modified
        observer.

2016-07-13  Tom Tromey  <tom@tromey.com>

        PR python/17698:
        * NEWS: Update.
        * python/py-breakpoint.c (bppy_get_pending): New function.
        (breakpoint_object_getset): Add entry for "pending".
        * breakpoint.h (pending_breakpoint_p): Declare.
        * breakpoint.c (pending_breakpoint_p): New function.

2016-07-13  Tom Tromey  <tom@tromey.com>

        * python/py-breakpoint.c (bppy_get_visibility)
        (gdbpy_breakpoint_created): Use user_breakpoint_p.

2016-07-13  Tom Tromey  <tom@tromey.com>

        PR cli/18053:
        * jit.c (jit_reader_load_command): Use tilde_expand.
        (_initialize_jit): Fix help for jit-reader-unload.  Set completer
        for new commands.

2016-07-12  Tom Tromey  <tom@tromey.com>

        PR python/19293:
        * python/lib/gdb/command/unwinders.py (do_enable_unwinder): Call
        gdb.invalidate_cached_frames.
        * python/lib/gdb/unwinder.py (register_unwinder): Call
        gdb.invalidate_cached_frames.
        * python/python.c (gdbpy_invalidate_cached_frames): New function.
        (python_GdbMethods): Add entry for invalidate_cached_frames.

2016-07-07  Walfred Tedeschi  <walfred.tedeschi@intel.com>

        * cp-namespace.c (cp_lookup_bare_symbol): Initialize 
        lang_this.symbol.

2016-07-07  Walfred Tedeschi  <walfred.tedeschi@intel.com>

        * cp-namespace.c (cp_lookup_bare_symbol): Use language passed as
        parameter to look for the symbol "this".


2016-07-06  John Baldwin  <jhb@FreeBSD.org>

        * h8300-tdep.c (h8300_print_register): Remove extraneous parentheses.

2016-07-06  John Baldwin  <jhb@FreeBSD.org>

        * ada-lang.c (ada_unpack_from_contents): Use unsigned constants with
        left shifts.

2016-07-06  John Baldwin  <jhb@FreeBSD.org>

        * sh64-tdep.c (sh64_analyze_prologue): Set "uses_fp" when setting
        the MEDIA_FP_REGNUM register.

2016-07-06  John Baldwin  <jhb@FreeBSD.org>

        * score-tdep.c (score7_malloc_and_get_memblock): Remove check for
        negative size.

2016-07-06  John Baldwin  <jhb@FreeBSD.org>

        * fbsd-nat.c (fbsd_is_vfork_done_pending): Fix return type.

2016-07-06  Yao Qi  <yao.qi@linaro.org>

        * arm-tdep.c (arm_vfp_cprc_sub_candidate): Don't call
        arm_vfp_cprc_sub_candidate for static field.

2016-07-06  Manish Goregaokar  <manish@mozilla.com>

        * rust-lang.c (rust_subscript): Allow subscripting pointers

2016-07-05  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * configure: Regenerate.
        * configure.ac (HAVE_LIBBABELTRACE): Fix pos variable dereference.

2016-07-01  Don Breazeal  <donb@codesourcery.com>

        * remote.c (remote_get_memory_xfer_limit): New function.
        * target-delegates.c: Regenerate.
        * target.c (memory_xfer_partial): Call
        target_ops.to_get_memory_xfer_limit.
        * target.h (struct target_ops) <to_get_memory_xfer_limit>: New
        member.

2016-07-01  John Baldwin  <jhb@FreeBSD.org>

        * fbsd-nat.c (struct fbsd_fork_child_info): Rename to ...
        (struct fbsd_fork_info): ... this.
        (struct fbsd_fork_info) <child>: Rename to ...
        (struct fbsd_fork_info) <ptid>: ... this.
        (fbsd_pending_children): Update type.
        (fbsd_remember_child): Update type and field name.
        (fbsd_is_child_pending): Likewise.
        (fbsd_pending_vfork_done): New variable.
        (fbsd_is_vfork_done_pending): New function.
        (fbsd_next_vfork_done): New function.
        (fbsd_resume): Don't resume processes with a pending vfork done
        event.
        (fbsd_wait): Report pending vfork done events.
        (fbsd_follow_fork): Delay and record a pending vfork done event
        for a vfork parent when detaching the child.

2016-07-01  John Baldwin  <jhb@FreeBSD.org>

        * fbsd-nat.c (super_resume): Move earlier next to "super_wait".
        (resume_one_thread_cb): Move below fork following helper code.
        (resume_all_threads_cb): Likewise.
        (fbsd_resume): Likewise.

2016-07-01  John Baldwin  <jhb@FreeBSD.org>

        * fbsd-nat.c (fbsd_follow_fork): Only detach child if
        "detach_fork" is true.

2016-07-01  John Baldwin  <jhb@FreeBSD.org>

        * x86bsd-nat.c: Include 'gdbthread.h'.
        (x86bsd_dr_set): Set debug registers on all threads belonging to
        the current inferior.

2016-07-01  John Baldwin  <jhb@FreeBSD.org>

        * Makefile.in [HFILES_NO_SRCDIR]: Replace 'amd64bsd-nat.h' with
        'x86bsd-nat.h'.
        * amd64bsd-nat.c: Include 'x86bsd-nat.h' instead of
        'amd64bsd-nat.h'.
        (amd64bsd_xsave_len): Rename and move to x86bsd-nat.c.
        (amd64bsd_fetch_inferior_registers): Replace 'amd64bsd_xsave_len'
        with 'x86bsd_xsave_len'.
        (amd64bsd_store_inferior_registers): Likewise.
        (amd64bsd_target): Inherit from x86bsd_target.
        (amd64bsd_dr_get): Rename and move to x86bsd-nat.c.
        (amd64bsd_dr_set): Likewise.
        (amd64bsd_dr_set_control): Likewise.
        (amd64bsd_dr_set_addr): Likewise.
        (amd64bsd_dr_get_addr): Likewise.
        (amd64bsd_dr_get_status): Likewise.
        (amd64bsd_dr_get_control): Likewise.
        * amd64fbsd-nat.c: Include 'x86bsd-nat.h' instead of
        'amd64bsd-nat.h'.
        (super_mourn_inferior): Move to x86bsd-nat.c.
        (amd64fbsd_mourn_inferior): Rename and move to x86bsd-nat.c.
        (amd64fbsd_read_description): Replace 'amd64bsd_xsave_len' with
        'x86bsd_xsave_len'.
        (_initialize_amd64fbsd_nat): Remove x86 watchpoint setup and
        mourn_inferior' target op.
        * config/i386/fbsd.mh (NATDEPFILES): Add x86bsd-nat.o.
        * config/i386/fbsd64.mh: Likewise.
        * config/i386/nbsd64.mh: Likewise.
        * config/i386/nbsdelf.mh: Likewise.
        * config/i386/obsd.mh: Likewise.
        * config/i386/obsd64.mh: Likewise.
        * i386bsd-nat.c: Include 'x86bsd-nat.h'.
        (i386bsd_xsave_len): Rename and move to x86bsd-nat.c.
        (i386bsd_fetch_inferior_registers): Replace 'i386bsd_xsave_len'
        with 'x86bsd_xsave_len'.
        (i386bsd_store_inferior_registers): Likewise.
        (i386bsd_target): Inherit from x86bsd_target.
        (i386bsd_dr_get): Rename and move to x86bsd-nat.c.
        (i386bsd_dr_set): Likewise.
        (i386bsd_dr_set_control): Likewise.
        (i386bsd_dr_set_addr): Likewise.
        (i386bsd_dr_get_addr): Likewise.
        (i386bsd_dr_get_status): Likewise.
        (i386bsd_dr_get_control): Likewise.
        * i386bsd-nat.h (i386bsd_xsave_len): Remove.
        (i386bsd_dr_set_control): Remove.
        (i386bsd_dr_set_addr): Remove.
        (i386bsd_dr_get_addr): Remove.
        (i386bsd_dr_get_status): Remove.
        (i386bsd_dr_get_control): Remove.
        * i386fbsd-nat.c: Include 'x86bsd-nat.h'.
        (i386fbsd_read_description): Replace 'i386bsd_xsave_len' with
        'x86bsd_xsave_len'.
        (_initialize_i386fbsd_nat): Remove x86 watchpoint setup and
        mourn_inferior' target op.
        * x86bsd-nat.c: New file.
        * x86bsd-nat.h: New file.

2016-07-01  Pedro Alves  <palves@redhat.com>
            Tom Tromey  <tom@tromey.com>

        * jit.c (jit_reader_load_command): Call reinit_frame_cache and
        jit_inferior_created_hook.
        (jit_reader_unload_command): Call reinit_frame_cache and
        jit_inferior_exit_hook.
        * jit.c (struct jit_unwind_private) <registers>: Delete field.
        <regcache>: New field.
        (jit_unwind_reg_set_impl): Set the register's value in the
        regcache.  Free the passed-in gdb_reg_value.
        (jit_dealloc_cache): Adjust to free the regcache.
        (jit_frame_sniffer): Allocate a regcache instead of an array of
        gdb_reg_value pointers.
        (jit_frame_this_id): Adjust.
        (jit_frame_prev_register): Read raw registers off of the regcache
        instead of from the gdb_reg_value pointer array.  Use
        gdbarch_pseudo_register_read_value to read pseudo registers.
        * regcache.c (regcache_raw_set_cached_value): New function,
        factored out from ...
        (regcache_raw_write): ... here.
        * regcache.h (regcache_raw_set_cached_value): Declare.

2016-07-01  Pedro Alves  <palves@redhat.com>
            Antoine Tremblay  <antoine.tremblay@ericsson.com>

        * inf-ptrace.c (inf_ptrace_detach_success): New function, factored
        out from ...
        (inf_ptrace_detach): ... here.
        * inf-ptrace.h (inf_ptrace_detach_success): New declaration.
        * linux-nat.c (get_pending_status): Rename to ...
        (get_detach_signal): ... this, and return a host signal instead of
        filling in a wait status.
        (detach_one_lwp): New function, factored out from detach_callback
        and adjusted to handle detaching from a zombie thread.
        (detach_callback): Skip the leader thread.
        (linux_nat_detach): No longer defer to inf_ptrace_detach to detach
        the leader thread, nor build a signal string to pass down.
        Instead, use target_announce_detach, detach_one_lwp and
        inf_ptrace_detach_success.

2016-07-01  Pedro Alves  <palves@redhat.com>

        * breakpoint.c (breakpoint_init_inferior): Discard watchpoint
        locations.
        * infcmd.c (detach_command): Call breakpoint_init_inferior.

2016-07-01  Pedro Alves  <palves@redhat.com>

        * darwin-nat.c (darwin_detach): Use target_announce_detach.
        * inf-ptrace.c (inf_ptrace_detach): Likewise.
        * nto-procfs.c (procfs_detach): Likewise.
        * remote.c (remote_detach_1): Likewise.
        * target.c (target_announce_detach): New function.
        * target.h (target_announce_detach): New declaration.

2016-06-29  Tom Tromey  <tom@tromey.com>

        PR python/20129:
        * python/lib/gdb/command/frame_filters.py (_do_enable_frame_filter)
        (SetFrameFilterPriority._set_filter_priority): Use "frame_filter",
        not "name".

2016-06-29  Tom Tromey  <tom@tromey.com>

        PR gdb/17210:
        * target.c (free_memory_read_result_vector): Take a pointer to the
        VEC as an argument.
        (read_memory_robust): Install a cleanup for "result".
        * mi/mi-main.c (mi_cmd_data_read_memory_bytes): Update.

2016-06-29  Manish Goregaokar  <manish@mozilla.com>

        * rust-lang.c (rust_get_disr_info): Initialize saveptr to NULL.

2016-06-29  Manish Goregaokar  <manish@mozilla.com>

        * rust-lang.c (rust_get_disr_info): Use strtok_r instead of strsep.

2016-06-28  Yao Qi  <yao.qi@linaro.org>

        * aarch64-tdep.c (aarch64_displaced_step_b): Use int64_t for
        variable new_offset.

2016-06-27  Manish Goregaokar  <manish@mozilla.com>

        * rust-lang.c (rust_print_type, rust_decorations): Print unit
        types as "()".
        (rust_print_type): Omit return type for functions returning unit.

2016-06-25  Pierre-Marie de Rodat  <derodat@adacore.com>

        * python/py-breakpoint.c (bppy_init): Clear bppy_pending_object
        when there is an error during the breakpoint creation.

2016-06-25  Tom Tromey  <tom@tromey.com>

        * rust-lang.c (rust_get_disr_info, rust_print_type): Fix
        formatting.

2016-06-25  Manish Goregaokar  <manish@mozilla.com>

        PR gdb/20239
        * rust-lang.c (rust_get_disr_info): Correctly interpret
        NonZero-optimized enums of arbitrary depth.
        (rust_print_type): Correctly print NonZero-optimized
        enums.

2016-06-24  David Taylor  <dtaylor@emc.com>

        PR gdb/17520 Structure offset wrong when 1/4 GB or greater.
        * c-lang.h: Change all parameters, variables, and struct or union
        members used as struct or union fie3ld offsets from int to
        LONGEST.
        * c-valprint.c: Likewise.
        * cp-abi.c: Likewise.
        * cp-abi.h: Likewise.
        * cp-valprint.c: Likewise.
        * d-valprint.c: Likewise.
        * dwarf2loc.c: Likewise.
        * eval.c: Likewise.
        * extension-priv.h: Likewise.
        * extension.c: Likewise.
        * extension.h: Likewise.
        * findvar.c: Likewise.
        * gdbtypes.h: Likewise.
        * gnu-v2-abi.c: Likewise.
        * gnu-v3-abi.c: Likewise.
        * go-valprint.c: Likewise.
        * guile/guile-internal.h: Likewise.
        * guile/scm-pretty-print.c: Likewise.
        * jv-valprint.c Likewise.
        * opencl-lang.c: Likewise.
        * p-lang.h: Likewise.
        * python/py-prettyprint.c: Likewise.
        * python/python-internal.h: Likewise.
        * spu-tdep.c: Likewise.
        * typeprint.c: Likewise.
        * valarith.c: Likewise.
        * valops.c: Likewise.
        * valprint.c: Likewise.
        * valprint.h: Likewise.
        * value.c: Likewise.
        * value.h: Likewise.
        * p-valprint.c: Likewise.
        * c-typeprint.c (c_type_print_base): When printing offset, use
        plongest, not %d.
        * gdbtypes.c (recursive_dump_type): Ditto.

2016-06-24  David Taylor  <david.taylor@emc.com>

        * MAINTAINERS (Write After Approval): Add David Taylor.

2016-06-24  John Baldwin  <jhb@FreeBSD.org>

        * configure.ac: Check for support for system call LWP fields on
        FreeBSD.
        * config.in, configure: Rebuild.
        * data-directory/Makefile.in (SYSCALLS_FILES): Add freebsd.xml.
        * fbsd-nat.c (fbsd_wait) [HAVE_STRUCT_PTRACE_LWPINFO_PL_SYSCALL_CODE]:
        Report system call events.
        [HAVE_STRUCT_PTRACE_LWPINFO_PL_SYSCALL_CODE]
        (fbsd_set_syscall_catchpoint): New function.
        (fbsd_nat_add_target) [HAVE_STRUCT_PTRACE_LWPINFO_PL_SYSCALL_CODE]:
        Set "to_set_syscall_catchpoint" to "fbsd_set_syscall_catchpoint".
        * fbsd-tdep.c: Include xml-syscall.h
        (fbsd_get_syscall_number): New function.
        (fbsd_init_abi): Set XML system call file name.
        Add "get_syscall_number" gdbarch method.
        * syscalls/freebsd.xml: New file.

2016-06-24  John Baldwin  <jhb@FreeBSD.org>

        * fbsd-tdep.c: Include "auxv.h".
        (fbsd_print_auxv_entry): New function.
        (fbsd_init_abi): Install gdbarch "print_auxv_entry" method.

2016-06-24  John Baldwin  <jhb@FreeBSD.org>

        * auxv.c (fprint_auxv_entry): New function.
        (default_print_auxv_entry): New function.
        (fprint_target_auxv): Use gdbarch_print_auxv_entry.
        * auxv.h (enum auxv_format): New enum.
        (fprint_auxv_entry): Declare.
        (default_print_auxv_entry): Declare.
        * gdbarch.sh (print_auxv_entry): New.
        * gdbarch.c, gdbarch.h: Re-generated.

2016-06-24  John Baldwin  <jhb@FreeBSD.org>

        * fbsd-nat.c [KERN_PROC_AUXV] New variable super_xfer_partial.
        (fbsd_xfer_partial): New function.
        (fbsd_nat_add_target) [KERN_PROC_AUXV] Set "to_xfer_partial" to
        "fbsd_xfer_partial".

2016-06-23  Tom Tromey  <tom@tromey.com>

        * symtab.c (symbol_find_demangled_name): Loop over languages and
        use language_sniff_from_mangled_name.
        * rust-lang.c (rust_sniff_from_mangled_name): New function.
        (rust_language_defn): Update.
        * p-lang.c (pascal_language_defn): Update.
        * opencl-lang.c (opencl_language_defn): Update.
        * objc-lang.c (objc_sniff_from_mangled_name): New function.
        (objc_language_defn): Update.
        * m2-lang.c (m2_language_defn): Update.
        * language.h (struct language_defn) <la_sniff_from_mangled_name>: New
        field.
        (language_sniff_from_mangled_name): Declare.
        * language.c (language_sniff_from_mangled_name): New function.
        (unknown_language_defn, auto_language_defn, local_language_defn):
        Update.
        * jv-lang.c (java_sniff_from_mangled_name): New function.
        (java_language_defn): Use it.
        * go-lang.c (go_sniff_from_mangled_name): New function.
        (go_language_defn): Use it.
        * f-lang.c (f_language_defn): Update.
        * defs.h (enum language): Reorder.
        * d-lang.c (d_sniff_from_mangled_name): New function.
        (d_language_defn): Use it.
        * cp-support.h (gdb_sniff_from_mangled_name): Declare.
        * cp-support.c (gdb_sniff_from_mangled_name): New function.
        * c-lang.c (c_language_defn, cplus_language_defn)
        (asm_language_defn, minimal_language_defn): Update.
        * ada-lang.c (ada_sniff_from_mangled_name): New function.
        (ada_language_defn): Use it.

2016-06-23  Tom Tromey  <tom@tromey.com>

        * ada-lang.c (ada_extensions): New array.
        (ada_language_defn): Use it.
        * c-lang.c (c_extensions): New array.
        (c_language_defn): Use it.
        (cplus_extensions): New array.
        (cplus_language_defn): Use it.
        (asm_extensions): New array.
        (asm_language_defn): Use it.
        (minimal_language_defn): Update.
        * d-lang.c (d_extensions): New array.
        (d_language_defn): Use it.
        * f-lang.c (f_extensions): New array.
        (f_language_defn): Use it.
        * go-lang.c (go_language_defn): Update.
        * jv-lang.c (java_extensions): New array.
        (java_language_defn): Use it.
        * language.c (add_language): Call add_filename_language.
        (unknown_language_defn, auto_language_defn, local_language_defn):
        Update.
        * language.h (struct language_defn) <la_filename_extensions>: New
        field.
        * m2-lang.c (m2_language_defn): Update.
        * objc-lang.c (objc_extensions): New array.
        (objc_language_defn): Use it.
        * opencl-lang.c (opencl_language_defn): Update.
        * p-lang.c (p_extensions): New array.
        (pascal_language_defn): Use it.
        * rust-lang.c (rust_extensions): New array.
        (rust_language_defn): Use it.
        * symfile.c (add_filename_language): No longer static.  Make "ext"
        const.
        (init_filename_language_table): Remove.
        (_initialize_symfile): Update.
        * symfile.h (add_filename_language): Declare.

2016-06-23  Tom Tromey  <tom@tromey.com>

        * symfile.c (filename_language_table): Now a VEC.
        (fl_table_size, fl_table_next): Remove.
        (add_filename_language): Use VEC_safe_push.
        (set_ext_lang_command, info_ext_lang_command)
        (deduce_language_from_filename): Use VEC_iterate.
        (init_filename_language_table): Use VEC_empty.

2016-06-23  Tom Tromey  <tom@tromey.com>

        * python/python.c (gdbpy_parameter): Now static.
        * python/python-internal.h (gdbpy_parameter): Don't declare.

2016-06-23  Tom Tromey  <tom@tromey.com>

        PR gdb/16483:
        * python/lib/gdb/command/frame_filters.py
        (InfoFrameFilter.list_frame_filters): Rename to print_list.  Print
        nothing if no filters found.  Return value indicating whether
        filters were printed.
        (InfoFrameFilter.print_list): Remove.
        (InfoFrameFilter.invoke): Print message if no frame filters
        found.

2016-06-21  Walfred Tedeschi  <walfred.tedeschi@intel.com>

        * f-valprint.c (f_val_print): Add field names for printing
        derived types fields.

2016-06-21  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * s390-linux-tdep.c (s390_iterate_over_regset_sections): Fix typo
        in name of last-break regset.

2016-06-21  Pedro Alves  <palves@redhat.com>

        * fork-child.c (fork_inferior): Switch the child to the main UI
        right after vfork.  Save/restore the current UI in the parent.
        Flush outputs of the main UI instead of the current UI.

2016-06-21  Pedro Alves  <palves@redhat.com>

        * breakpoint.c (watchpoint_check): Send watchpoint-deleted output
        to all UIs.

2016-06-21  Pedro Alves  <palves@redhat.com>

        * NEWS: Mention support for running interpreters on separate
        UIs and the new new-ui command.

2016-06-21  Pedro Alves  <palves@redhat.com>

        * interps.c (set_top_level_interpreter): New function, factored
        out from captured_main.
        (interpreter_completer): Make extern.
        * interps.h (set_top_level_interpreter, interpreter_completer):
        New declarations.
        (captured_main): Use set_top_level_interpreter.
        * top.c [!O_NOCTTY] (O_NOCTTY): Define as 0.
        (open_terminal_stream, new_ui_command): New functions.
        (init_main): Install the "new-ui" command.

2016-06-21  Pedro Alves  <palves@redhat.com>

        * cli/cli-script.c (read_next_line): Adjust to per-UI stdin.
        (read_command_lines): Use input_interactive_p instead of
        input_from_terminal_p.
        * defs.h (struct ui): Forward declare.
        (input_from_terminal_p): Rename to ...
        (input_interactive_p): ... this.
        * event-top.c (stdin_event_handler): Pass 0 as from_tty argument
        to quit_command.
        (command_handler): Adjust to per-UI stdin.
        (handle_line_of_input): Adjust to per-UI stdin and use
        input_interactive_p instead of ISATTY and input_from_terminal_p.
        (gdb_readline_no_editing_callback): Adjust to per-UI stdin.
        (command_line_handler): Always pass true as "from_tty" parameter
        of handle_line_of_input and execute_command.
        (async_sigterm_handler): Pass 0 as from_tty argument to
        quit_command.
        * inflow.c (interactive_mode, show_interactive_mode): Moved to ...
        (gdb_has_a_terminal): Don't check interactive_mode here.
        (_initialize_inflow): Don't install "set interactive-mode" here.
        * main.c (captured_command_loop): Adjust to per-UI stdin.
        * mi/mi-interp.c (mi_execute_command_wrapper): Adjust to per-UI
        stdin.
        * top.c (new_ui): Save the stdin stream and whether it's a tty.
        (dont_repeat): Adjust to per-UI stdin.
        (command_line_input): Adjust to per-UI stdin and to use
        input_interactive_p.
        (quit_force): Write history if any UI supports interactive input.
        (interactive_mode, show_interactive_mode): Move here, from
        inflow.c.
        (input_from_terminal_p): Rename to ...
        (input_interactive_p): ... this, and check the "interactive_mode"
        global instead of calling gdb_has_a_terminal.
        (_initialize_top): Install "set interactive-mode" here.
        * top.h (struct ui) <stdin_stream, input_interactive_p>: New
        fields.
        * utils.c (quit): Pass 0 as from_tty argument to quit_force.
        (defaulted_query): Adjust to per-UI stdin and to use
        input_interactive_p.

2016-06-21  Pedro Alves  <palves@redhat.com>

        * event-top.c (stdin_event_handler): Don't quit gdb if it was a
        secondary UI's input stream that closed.  Instead, just delete the
        UI.

2016-06-21  Pedro Alves  <palves@redhat.com>

        * event-top.c (main_ui_): Delete.
        (main_ui, current_ui, ui_list): No longer initialize here.
        * main.c (captured_main): UI initialization code factored out to
        new new_ui function.
        (gdb_main): Wrap captured_main with TRY/CATCH instead of
        catch_errors.
        * top.c (highest_ui_num): New global.
        (new_ui): New function.
        * top.h (struct ui) <num>: New field.
        (new_ui): New declaration.

2016-06-21  Pedro Alves  <palves@redhat.com>

        * cli/cli-interp.c (cli_on_normal_stop): Bail out early if there's
        nothing to print.  Use should_print_stop_to_console.
        * tui/tui-interp.c (tui_on_normal_stop): Likewise.

2016-06-21  Pedro Alves  <palves@redhat.com>

        * breakpoint.c (new_until_break_fsm): Add 'cmd_interp' parameter.
        (until_break_fsm_should_stop, until_break_fsm_clean_up): Add
        thread parameter.
        (until_break_command): Pass command interpreter to thread fsm
        ctor.
        * cli/cli-interp.c (should_print_stop_to_console): Adjust.
        * gdbthread.h (struct thread_control_state) <command_interp>:
        Delete field.
        * infcall.c (new_call_thread_fsm): Add 'cmd_interp' parameter.
        Pass it down.
        (call_thread_fsm_should_stop): Add thread parameter.
        (call_function_by_hand_dummy): Pass command interpreter to thread
        fsm ctor.  Pass thread pointer to fsm clean up method.
        * infcmd.c: Include interps.h.
        (struct step_command_fsm) <thread>: Delete field.
        (new_step_command_fsm): Add 'cmd_interp' parameter.  Pass it down.
        (step_command_fsm_prepare): Remove references to fsm's thread
        field.
        (step_1): Pass command interpreter to thread
        fsm ctor.  Pass thread pointer to fsm clean up method.
        (step_command_fsm_should_stop, step_command_fsm_clean_up): Add
        thread parameter and use it.
        (new_until_next_fsm): Add 'cmd_interp' parameter.  Pass it down.
        (until_next_fsm_should_stop, until_next_fsm_clean_up): Add thread
        parameter and use it.
        (until_next_command): Pass command interpreter to thread fsm ctor.
        (struct finish_command_fsm) <thread>: Delete field.
        (finish_command_fsm_ops): Add NULL slot for should_notify_stop.
        (new_finish_command_fsm): Add 'cmd_interp' parameter and pass it
        down.  Remove thread parameter and adjust.
        (finish_command_fsm_should_stop, finish_command_fsm_clean_up): Add
        thread parameter and use it.
        (finish_command): Pass command interpreter to thread fsm ctor.
        Don't pass thread.
        * infrun.c (follow_fork): Move thread fsm to child fork instead of
        command interpreter, only.
        (clear_proceed_status_thread): Remove reference to command_interp.
        (proceed): Don't record the thread's command interpreter.
        (clean_up_just_stopped_threads_fsms): Pass thread to fsm clean_up
        method.
        (fetch_inferior_event): Pass thread to fsm should_stop method.
        * thread-fsm.c (thread_fsm_ctor): Add 'cmd_interp' parameter.
        Store it.
        (thread_fsm_clean_up, thread_fsm_should_stop): Add thread
        parameter and pass it down.
        * thread-fsm.h (struct thread_fsm) <command_interp>: New field.
        (struct thread_fsm_ops) <clean_up, should_stop>: Add thread
        parameter.
        (thread_fsm_ctor): Add 'cmd_interp' parameter.
        (thread_fsm_clean_up, thread_fsm_should_stop): Add thread
        parameter.
        * thread.c (thread_cancel_execution_command): Pass thread to
        thread fsm clean_up method.

2016-06-21  Pedro Alves  <palves@redhat.com>

        * cli/cli-interp.c: Include gdbthread.h and thread-fsm.h.
        (should_print_stop_to_console): New function, factored out from
        mi_on_normal_stop_1.
        * cli/cli-interp.h (should_print_stop_to_console): Declare.
        * mi/mi-interp.c (mi_on_normal_stop_1): Use
        should_print_stop_to_console.  Pass it the current UI's console
        interpreter.
        * mi/mi-main.c (captured_mi_execute_command): Use the
        INTERP_CONSOLE symbol rather than explicit "console".

2016-06-21  Pedro Alves  <palves@redhat.com>

        * infcmd.c (prepare_execution_command): Use
        all_uis_on_sync_execution_starting.
        * infrun.c (all_uis_on_sync_execution_starting): New function.
        * infrun.h (all_uis_on_sync_execution_starting): Declare.

2016-06-21  Pedro Alves  <palves@redhat.com>

        * annotate.c: Include top.h.
        (async_background_execution_p): Delete.
        (print_value_flags): Check the UI's prompt state rather then
        async_background_execution_p.
        * event-loop.c (start_event_loop): Set the prompt state to
        PROMPT_NEEDED.
        * event-top.c (display_gdb_prompt, async_enable_stdin)
        (async_disable_stdin): Check the current UI's prompt state instead
        of the sync_execution global.
        (command_line_handler): Set the prompt state to PROMPT_NEEDED
        before running a command, and display the prompt if still needed
        afterwards.
        * infcall.c (struct call_thread_fsm) <waiting_ui>: New field.
        (new_call_thread_fsm): New parameter 'waiting_ui'.  Store it.
        (call_thread_fsm_should_stop): Set the prompt state to
        PROMPT_NEEDED.
        (run_inferior_call): Adjust to temporarily set the prompt state to
        PROMPT_BLOCKED instead of using the sync_execution global.
        (call_function_by_hand_dummy): Pass the current UI to
        new_call_thread_fsm.
        * infcmd.c: Include top.h.
        (continue_1): Check the current UI's prompt state instead of the
        sync_execution global.
        (continue_command): Validate global execution state before calling
        prepare_execution_command.
        (step_1): Call all_uis_check_sync_execution_done.
        (attach_post_wait): Don't call async_enable_stdin here.  Remove
        reference to sync_execution.
        * infrun.c (sync_execution): Delete global.
        (follow_fork_inferior)
        (reinstall_readline_callback_handler_cleanup): Check the current
        UI's prompt state instead of the sync_execution global.
        (check_curr_ui_sync_execution_done)
        (all_uis_check_sync_execution_done): New functions.
        (fetch_inferior_event): Call all_uis_check_sync_execution_done
        instead of trying to determine whether the global sync execution
        changed.
        (handle_no_resumed): Check the prompt state of all UIs.
        (normal_stop): Emit the no unwait-for even to all PROMPT_BLOCKED
        UIs.  Emit the "Switching to" notification to all UIs.  Enable
        stdin in all UIs.
        * infrun.h (sync_execution): Delete.
        (all_uis_check_sync_execution_done): Declare.
        * main.c (captured_command_loop): Don't call
        interp_pre_command_loop if the prompt is blocked.
        (catch_command_errors, catch_command_errors_const): Adjust.
        (captured_main): Set the initial prompt state to PROMPT_NEEDED.
        * mi/mi-interp.c (display_mi_prompt): Set the prompt state to
        PROMPTED.
        (mi_interpreter_resume): Don't clear sync_execution.  Remove hack
        comment.
        (mi_execute_command_input_handler): Set the prompt state to
        PROMPT_NEEDED before executing the command, and only display the
        prompt if the prompt state is PROMPT_NEEDED afterwards.
        (mi_on_resume_1): Adjust to check the prompt state.
        * target.c (target_terminal_inferior): Adjust to check the prompt
        state.
        * top.c (wait_sync_command_done, maybe_wait_sync_command_done)
        (execute_command): Check the current UI's prompt state instead of
        sync_execution.
        * top.h (enum prompt_state): New.
        (struct ui) <prompt_state>: New field.
        (ALL_UIS): New macro.

2016-06-21  Pedro Alves  <palves@redhat.com>

        * top.c (gdb_secondary_prompt_depth): Delete.
        (gdb_in_secondary_prompt_p): Add ui parameter.  Use it.
        (gdb_readline_wrapper_cleanup, gdb_readline_wrapper): Adjust to
        per-UI gdb_secondary_prompt_depth.
        * top.h (struct ui) <secondary_prompt_depth>: New field.

2016-06-21  Pedro Alves  <palves@redhat.com>

        * cli/cli-interp.c (cli_interpreter_pre_command_loop): New
        function.
        (cli_interp_procs): Install it instead of cli_command_loop.
        * cli/cli-interp.h (cli_interpreter_pre_command_loop): Declare.
        * event-top.c (cli_command_loop): Delete.
        * interps.c (interp_new): Remove reference to command_loop_proc.
        (current_interp_command_loop): Delete.
        (interp_pre_command_loop): New function.
        (interp_command_loop_ftype): Delete.
        * interps.h (interp_pre_command_loop_ftype): New typedef.
        (struct interp_procs) <command_loop_proc>: Delele field.
        <pre_command_loop_proc>: New field.
        (current_interp_command_loop): Delete declaration.
        (interp_pre_command_loop): New declaration.
        * main.c (captured_command_loop): Call interp_pre_command_loop
        instead of current_interp_command_loop and start an event loop.
        * mi/mi-interp.c (mi_command_loop): Delete.
        (mi_interpreter_pre_command_loop): New.
        (mi_interp_procs): Update.
        * tui/tui-interp.c (tui_interp_procs): Install
        cli_interpreter_pre_command_loop instead of cli_command_loop.

2016-06-21  Pedro Alves  <palves@redhat.com>

        * interps.c (current_interpreter): New function.
        * interps.h (current_interpreter): New declaration.
        * mi/mi-cmds.h (raw_stdout): Delete declaration.
        * mi/mi-common.h (struct mi_interp) <raw_stdout,
        saved_raw_stdout>: New field.
        * mi/mi-interp.c (display_mi_prompt): New parameter 'mi'.  Adjust
        to per-UI raw_stdout.
        (mi_interpreter_init): Adjust to per-UI raw_stdout.
        (mi_on_sync_execution_done, mi_execute_command_input_handler)
        (mi_command_loop): Pass MI instance to display_mi_prompt.
        (mi_on_normal_stop_1, mi_output_running_pid, mi_on_resume_1)
        (mi_on_resume): Adjust to per-UI raw_stdout.
        (saved_raw_stdout): Delete.
        (mi_set_logging): Adjust to per-UI raw_stdout and
        saved_raw_stdout.
        * mi/mi-main.c (raw_stdout): Delete.
        (mi_cmd_gdb_exit, captured_mi_execute_command)
        (mi_print_exception, mi_load_progress): Adjust to per-UI
        raw_stdout.
        (print_diff_now, mi_print_timing_maybe): New ui_file parameter.
        Pass it along.
        (print_diff): New ui_file parameter.  Send output there instead of
        raw_stdout.
        * mi/mi-main.h (struct ui_file): Forward declare.
        (mi_print_timing_maybe): Add ui_file parameter.

2016-06-21  Pedro Alves  <palves@redhat.com>

        * mi/mi-interp.c (display_mi_prompt): New function.

2016-06-21  Pedro Alves  <palves@redhat.com>

        * target.c (target_terminal_inferior): Bail out after
        unregistering input_fd if not on the main UI.
        (target_terminal_ours): Bail out after registering input_fd if not
        on the main UI.
        (target_terminal_ours_for_output): Bail out if not on the main UI.

2016-06-21  Pedro Alves  <palves@redhat.com>

        * event-top.c (restore_ui_cleanup): Make extern.
        * infrun.c (fetch_inferior_event): Always switch to the main UI.
        * top.h (restore_ui_cleanup): Declare.

2016-06-21  Pedro Alves  <palves@redhat.com>

        PR mi/20034
        * cli/cli-interp.c: Include cli-interp.h and event-top.h.
        (cli_interpreter_resume): Pass 1 to gdb_setup_readline.  Set the
        UI's input_handler here.
        (cli_interpreter_supports_command_editing): New function.
        (cli_interp_procs): Install it.
        * cli/cli-interp.h: New file.
        * event-top.c (async_command_editing_p): Rename to ...
        (set_editing_cmd_var): ... this.
        (change_line_handler): Add parameter 'editing', and use it.  Bail
        early if the interpreter doesn't support editing.  Don't touch
        readline state if editing is off.
        (gdb_rl_callback_handler_remove, gdb_rl_callback_handler_install)
        (gdb_rl_callback_handler_reinstall): Assert the current UI is the
        main UI.
        (display_gdb_prompt): Don't call gdb_rl_callback_handler_remove if
        not using readline.  Check whether the current UI is using command
        editing instead of checking the async_command_editing_p global.
        (set_async_editing_command): Delete.
        (gdb_setup_readline): Add 'editing' parameter.  Only allow editing
        on the main UI.  Don't touch readline state if editing is off.
        (gdb_disable_readline): Don't touch readline state if editing is
        off.
        * event-top.h (gdb_setup_readline): Add 'int' parameter.
        (set_async_editing_command): Delete declaration.
        (change_line_handler, command_line_handler): Declare.
        (async_command_editing_p): Rename to ...
        (set_editing_cmd_var): ... this.
        * infrun.c (reinstall_readline_callback_handler_cleanup): Check
        whether the current UI has editing enabled rather than checking
        the async_command_editing_p global.
        * interps.c (interp_supports_command_editing): New function.
        * interps.h (interp_supports_command_editing_ftype): New typedef.
        (struct interp_procs) <supports_command_editing_proc>: New field.
        (interp_supports_command_editing): Declare.
        * mi/mi-interp.c (mi_interpreter_resume): Pass 0 to
        gdb_setup_readline.  Don't clear the async_command_editing_p
        global.  Update comments.
        * top.c (gdb_readline_wrapper_line, gdb_readline_wrapper): Check
        whether the current UI has editing enabled rather than checking
        the async_command_editing_p global.  Don't touch readline state if
        editing is off.
        (undo_terminal_modifications_before_exit): Switch to the main UI.
        Unconditionally call gdb_disable_readline.
        (set_editing): New function.
        (show_async_command_editing_p): Rename to ...
        (show_editing): ... this.  Show the state of the current UI.
        (_initialize_top): Adjust.
        * top.h (struct ui) <command_editing>: New field.
        * tui/tui-interp.c: Include cli/cli-interp.h.
        (tui_resume): Pass 1 to gdb_setup_readline.  Set the UI's
        input_handler.
        (tui_interp_procs): Install
        cli_interpreter_supports_command_editing.
        * tui/tui-io.c (tui_getc): Check whether the current UI has
        editing enabled rather than checking the async_command_editing_p
        global.

2016-06-21  Pedro Alves  <palves@redhat.com>

        * top.c: Call gen_ret_current_ui_field_ptr for current_uiout.
        * top.h (struct ui) <m_current_uiout>: New field.
        * ui-out.c (current_uiout): Delete.
        * ui-out.h (current_uiout): Delete.
        (current_ui_current_uiout_ptr): New declaration.
        (current_uiout): Reimplement as wrapper around
        current_ui_current_uiout_ptr.

2016-06-21  Pedro Alves  <palves@redhat.com>

        * ui-out.c (default_ui_out_impl): Delete.
        (def_uiout): Delete.
        (current_uiout): Set to NULL.
        (default_table_begin, default_table_body, default_table_end)
        (default_table_header, default_begin, default_end)
        (default_field_int, default_field_skip, default_field_string)
        (default_field_fmt, default_spaces, default_text, default_message)
        (default_wrap_hint, default_flush, default_data_destroy): Delete.

2016-06-21  Pedro Alves  <palves@redhat.com>

        * event-top.c (gdb_setup_readline): Pass the UI's outstream and
        errstream to stdout_fileopen and stderr_fileopen.
        * exceptions.c: Include top.h.
        (print_flush): Open the current UI's outstream file descriptor,
        instead of hardcoding file descriptor 1.
        * main.c (captured_main): Save the main UI's out and error
        streams.  Adjust stderr_fileopen call.
        * top.h (struct ui) <outstream, errstream>: New fields.
        * ui-file.c (stderr_fileopen): Add stream parameter.  Use it
        instead of stderr.
        * ui-file.h (stderr_fileopen): Add stream parameter and update
        comment.

2016-06-21  Pedro Alves  <palves@redhat.com>

        * event-top.c (input_fd): Delete.
        (stdin_event_handler): Switch to the UI whose input descriptor got
        the event.  Adjust to per-UI input_fd.
        (gdb_setup_readline): Don't set the input_fd global.  Adjust to
        per-UI input_fd.
        (gdb_disable_readline): Adjust to per-UI input_fd.
        * event-top.h (input_fd): Delete declaration.
        * linux-nat.c (linux_nat_terminal_inferior): Don't remove input_fd
        from the event-loop here.
        (linux_nat_terminal_ours): Don't register input_fd in the
        event-loop here.
        * main.c (captured_main): Adjust to per-UI input_fd.
        * remote.c (remote_terminal_inferior): Don't remove input_fd from
        the event-loop here.
        (remote_terminal_ours): Don't register input_fd in the event-loop
        here.
        * target.c: Include top.h and event-top.h.
        (target_terminal_inferior): Remove input_fd from the event-loop
        here.
        (target_terminal_ours): Register input_fd in the event-loop.
        * top.h (struct ui) <input_fd>: New field.

2016-06-21  Pedro Alves  <palves@redhat.com>

        * cli/cli-script.c (execute_user_command, read_next_line)
        (read_next_line): Adjust to per-UI instream.
        * event-top.c (stdin_event_handler, command_handler)
        (handle_line_of_input, command_line_handler)
        (gdb_readline_no_editing_callback, async_sigterm_handler)
        (gdb_setup_readline): Likewise.
        * inflow.c: Include top.h.
        (gdb_has_a_terminal, child_terminal_init_with_pgrp)
        (gdb_save_tty_state, child_terminal_inferior)
        (child_terminal_ours_1, copy_terminal_info): Use the main UI.
        (initialize_stdin_serial): Adjust to per-UI instream.
        * main.c (captured_command_loop, captured_main): Adjust to per-UI
        instream.
        * mi/mi-interp.c (mi_execute_command_wrapper): Likewise.
        * python/python.c (python_interactive_command): Likewise.
        * terminal.h (struct ui): Forward declare.
        (initialize_stdin_serial): Add struct ui parameter.
        * top.c (instream): Delete.
        (do_restore_instream_cleanup, read_command_file, dont_repeat)
        (gdb_readline_no_editing, command_line_input)
        (input_from_terminal_p, gdb_init): Adjust to per-UI instream.
        * top.h (struct ui) <instream>: New field.
        (instream): Delete declaration.
        (quit): Adjust to per-UI instream.

2016-06-21  Pedro Alves  <palves@redhat.com>

        * event-loop.c: Include top.h.
        (invoke_async_signal_handlers): Switch to the main UI.
        * event-top.c (main_ui_): Update comment.
        (main_ui): New global.
        * top.h (main_ui): Declare.

2016-06-21  Pedro Alves  <palves@redhat.com>

        * cli/cli-interp.c (cli_interp): Delete.
        (as_cli_interp): New function.
        (cli_on_normal_stop, cli_on_signal_received)
        (cli_on_end_stepping_range, cli_on_signal_exited, cli_on_exited)
        (cli_on_no_history): Send output to all CLI UIs.
        (cli_on_sync_execution_done, cli_on_command_error): Skip output if
        the top level interpreter is not a CLI.
        (cli_interpreter_init): Don't set cli_interp or install observers
        here.
        (_initialize_cli_interp): Install observers here.
        * event-top.c (main_ui_, ui_list): New globals.
        (current_ui): Point to main_ui_.
        (restore_ui_cleanup, switch_thru_all_uis_init)
        (switch_thru_all_uis_cond, switch_thru_all_uis_next): New
        functions.
        * mi/mi-interp.c (as_mi_interp): New function.
        (mi_interpreter_init): Don't install observers here.
        (mi_on_sync_execution_done): Skip output if the top level
        interpreter is not a MI.
        (mi_new_thread, mi_thread_exit, mi_record_changed)
        (mi_inferior_added, mi_inferior_appeared, mi_inferior_exit)
        (mi_inferior_removed): Send output to all MI UIs.
        (find_mi_interpreter, mi_interp_data): Delete.
        (find_mi_interp): New function.
        (mi_on_signal_received, mi_on_end_stepping_range)
        (mi_on_signal_exited, mi_on_exited, mi_on_no_history): Send output
        to all MI UIs.
        (mi_on_normal_stop): Rename to ...
        (mi_on_normal_stop_1): ... this.
        (mi_on_normal_stop): Reimplement, sending output to all MI UIs.
        (mi_traceframe_changed, mi_tsv_created, mi_tsv_deleted)
        (mi_tsv_modified, mi_breakpoint_created, mi_breakpoint_deleted)
        (mi_breakpoint_modified, mi_output_running_pid): Send output to
        all MI UIs.
        (mi_on_resume): Rename to ...
        (mi_on_resume_1): ... this.  Don't handle infcalls here.
        (mi_on_resume): Reimplement, sending output to all MI UIs.
        (mi_solib_loaded, mi_solib_unloaded, mi_command_param_changed)
        (mi_memory_changed): Send output to all MI UIs.
        (report_initial_inferior): Install observers here.
        * top.h (struct ui) <next>: New field.
        (ui_list): Declare.
        (struct switch_thru_all_uis): New.
        (switch_thru_all_uis_init, switch_thru_all_uis_cond)
        (switch_thru_all_uis_next): Declare.
        (SWITCH_THRU_ALL_UIS): New macro.
        * tui/tui-interp.c (tui_interp): Delete global.
        (as_tui_interp): New function.
        (tui_on_normal_stop, tui_on_signal_received)
        (tui_on_end_stepping_range, tui_on_signal_exited, tui_on_exited)
        (tui_on_no_history): Send output to all TUI UIs.
        (tui_on_sync_execution_done, tui_on_command_error): Skip output if
        the top level interpreter is not a TUI.
        (tui_init): Don't set tui_interp or install observers here.
        (_initialize_tui_interp): Install observers here.

2016-06-21  Pedro Alves  <palves@redhat.com>

        * cli/cli-interp.c (cli_uiout): Delete, moved into ...
        (struct cli_interp): ... this new structure.
        (cli_on_normal_stop, cli_on_signal_received)
        (cli_on_end_stepping_range, cli_on_signal_exited, cli_on_exited)
        (cli_on_no_history): Use interp_ui_out.
        (cli_interpreter_init): If top level, set the cli_interp global.
        (cli_interpreter_init): Return the interp's data instead of NULL.
        (cli_interpreter_resume, cli_interpreter_exec, cli_ui_out): Adjust
        to cli_uiout being in the interpreter's data.
        (cli_interp_procs): New, factored out from _initialize_cli_interp.
        (cli_interp_factory): New function.
        (_initialize_cli_interp): Call interp_factory_register.
        * interps.c (get_interp_info): New, factored out from ...
        (get_current_interp_info): ... this.
        (interp_new): Add parameter 'data'.  Store it.
        (struct interp_factory): New function.
        (interp_factory_p): New typedef.  Define a VEC_P.
        (interpreter_factories): New global.
        (interp_factory_register): New function.
        (interp_add): Add 'ui' parameter.  Use get_interp_info and
        interp_lookup_existing.
        (interp_lookup): Rename to ...
        (interp_lookup_existing): ... this.  Add 'ui' parameter.  Don't
        check for NULL or empty name here.
        (interp_lookup): Add 'ui' parameter and reimplement.
        (interp_set_temp, interpreter_exec_cmd): Adjust.
        (interpreter_completer): Complete on registered interpreter
        factories instead of interpreters.
        * interps.h (interp_factory_func): New typedef.
        (interp_factory_register): Declare.
        (interp_new, interp_add): Adjust.
        (interp_lookup): Declare.
        * main.c (captured_main): Adjust.
        * mi/mi-interp.c (mi_cmd_interpreter_exec): Adjust.
        (mi_interp_procs): New, factored out from
        _initialize_mi_interp.
        (mi_interp_factory): New function.
        * python/python.c (execute_gdb_command): Adjust.
        * tui/tui-interp.c (tui_init): If top level, set the tui_interp
        global.
        (tui_interp_procs): New.
        (tui_interp_factory): New function.
        (_initialize_tui_interp): Call interp_factory_register.

2016-06-21  Pedro Alves  <palves@redhat.com>

        * breakpoint.c (bpstat_do_actions_1): Access the current UI's
        async field instead of the interpreter_async global.
        * cli/cli-script.c (execute_user_command, while_command)
        (if_command, script_from_file): Likewise.
        * compile/compile.c: Include top.h instead of interps.h.
        (compile_file_command, compile_code_command)
        (compile_print_command): Access the current UI's async field
        instead of the interpreter_async global.
        * guile/guile.c: Include top.h instead of interps.h.
        (guile_repl_command, guile_command, gdbscm_execute_gdb_command):
        Access the current UI's async field instead of the
        interpreter_async global.
        * guile/scm-ports.c: Include top.h instead of interps.h.
        (ioscm_with_output_to_port_worker): Access the current UI's async
        field instead of the interpreter_async global.
        * inf-loop.c (inferior_event_handler): Likewise.
        * infcall.c (run_inferior_call): Likewise.
        * infrun.c (reinstall_readline_callback_handler_cleanup)
        (fetch_inferior_event): Likewise.
        * interps.c (interpreter_async): Delete.
        (struct ui_interp_info): New.
        (get_current_interp_info): New function.
        (interp_list, current_interpreter, top_level_interpreter_ptr):
        Delete.
        (interp_add, interp_set, interp_lookup, interp_ui_out)
        (current_interp_set_logging, interp_set_temp)
        (current_interp_named_p): Adjust to per-UI interpreters.
        (command_interpreter): Delete.
        (command_interp, current_interp_command_loop, interp_quiet_p)
        (interp_exec, interpreter_exec_cmd, interpreter_completer)
        (top_level_interpreter, top_level_interpreter_data): Adjust to
        per-UI interpreters.
        * interps.h (interpreter_async): Delete.
        * main.c (captured_command_loop): Access the current UI's async
        field instead of the interpreter_async global.
        * python/python.c (python_interactive_command, python_command)
        (execute_gdb_command): Likewise.
        * top.c (maybe_wait_sync_command_done, execute_command_to_string):
        Access the current UI's async field instead of the
        interpreter_async global.
        * top.h (struct tl_interp_info): Forward declare.
        (struct ui) <interp_info, async>: New fields.

2016-06-21  Pedro Alves  <palves@redhat.com>

        * main.c (gdb_stdout, gdb_stderr, gdb_stdlog, gdb_stdin): Delete
        globals.
        (gen_ret_current_ui_field_ptr): New macro.  Use it to generate
        wrappers for gdb_stdout, gdb_stderr, gdb_stdlog and gdb_stdin.
        * top.h (struct ui) <m_gdb_stdout, m_gdb_stdin, m_gdb_stderr,
        m_gdb_stdlog>: New fields.
        (current_ui_gdb_stdout_ptr, current_ui_gdb_stdin_ptr)
        (current_ui_gdb_stderr_ptr, current_ui_gdb_stdlog_ptr): Declare.
        (gdb_stdout, gdb_stdin, gdb_stderr, gdb_stdlog): Reimplement as
        macros.

2016-06-21  Pedro Alves  <palves@redhat.com>

        * event-top.c: Update readline-related comments.
        (input_handler, call_readline): Delete globals.
        (gdb_rl_callback_handler): Call the current UI's input_handler
        method.
        (change_line_handler): Adjust to set current UI's properties
        instead of globals.
        (current_ui_, current_ui): New globals.
        (get_command_line_buffer): Rewrite to refer to the current UI.
        (stdin_event_handler): Adjust to call the call_readline method of
        the current UI.
        (gdb_readline_no_editing_callback): Adjust to call the current UI's
        input_handler method.
        (gdb_setup_readline): Adjust to set current UI's properties
        instead of globals.
        * event-top.h (call_readline, input_handler): Delete declarations.
        * mi/mi-interp.c (mi_interpreter_resume): Adjust to set current
        UI's properties instead of globals.
        * top.c (gdb_readline_wrapper_cleanup): Adjust to set current UI's
        properties instead of globals.
        (gdb_readline_wrapper): Adjust to call and set current UI's
        methods instead of globals.
        * top.h: Include buffer.h and event-loop.h.
        (struct ui): New struct.
        (current_ui): New declaration.

2016-06-21  Pedro Alves  <palves@redhat.com>

        * ada-lang.c (ada_exception_name_addr_1): Add comment.
        (print_it_exception): Select the current frame.

2016-06-17  Yan-Ting Lin  <currygt52@gmail.com>

        * Makefile.in (ALL_TARGET_OBS): Add nds32-tdep.o.
        (HFILES_NO_SRCDIR): Add nds32-tdep.h.
        (ALLDEPFILES): Add nds32-tdep.c.
        * NEWS: Mention new NDS32 port.
        * configure.tgt: Add NDS32.
        * nds32-tdep.c: New file.
        * nds32-tdep.h: New file.
        * features/Makefile (XMLTOC): Add nds32.xml.
        * features/nds32-core.xml: New file.
        * features/nds32-fpu.xml: New file.
        * features/nds32-system.xml: New file.
        * features/nds32.c: New file (generated).
        * features/nds32.xml: New file.

2016-06-14  John Baldwin  <jhb@FreeBSD.org>

        * v850-tdep.c (v850_use_struct_convention): Trim type length checks.

2016-06-14  John Baldwin  <jhb@FreeBSD.org>

        * tui/tui-stack.c (tui_show_frame_info): Fix type mismatch.

2016-06-14  John Baldwin  <jhb@FreeBSD.org>

        * rs6000-tdep.c (ppc_process_record_op31): Initialize ra.

2016-06-13  Nick Clifton  <nickc@redhat.com>

        * gdbtypes.c (replace_type): Fix assertion.

2016-06-10  Tom Tromey  <tom@tromey.com>

        * gdbtypes.c (arch_type, arch_integer_type, arch_character_type)
        (arch_boolean_type, arch_float_type, arch_complex_type)
        (arch_flags_type, append_flags_type_field)
        (append_flags_type_flag, arch_composite_type)
        (append_composite_type_field_raw)
        (append_composite_type_field_aligned)
        (append_composite_type_field): Make "name" parameter const.
        * gdbtypes.h (arch_type, arch_integer_type, arch_character_type)
        (arch_boolean_type, arch_float_type, arch_complex_type)
        (append_composite_type_field, append_composite_type_field_aligned)
        (append_composite_type_field_raw, arch_flags_type)
        (append_flags_type_field, append_flags_type_flag): Constify.

2016-06-10  Tom Tromey  <tom@tromey.com>

        PR rust/20110:
        * rust-exp.y (lex_number): Don't truncate large numbers to i32.

2016-06-10  Tom Tromey  <tom@tromey.com>

        * Makefile.in (COMMON_OBS): Remove rust-exp.o.
        (YYFILES): Add rust-exp.c.
        (YYOBJ): Add rust-exp.o.
        (local-maintainer-clean): Remove rust-exp.c.

2016-06-09  Toshihito Kikuchi  <k.toshihito@yahoo.de>

        * NEWS: Mention that GDB now supports a negative repeat count in
        the 'x' command.
        * printcmd.c (decode_format): Allow '-' in the parameter
        "string_ptr" to accept a negative repeat count.
        (find_instruction_backward): New function.
        (read_memory_backward): New function.
        (integer_is_zero): New function.
        (find_string_backward): New function.
        (do_examine): Use new functions to examine memory backward.
        (_initialize_printcmd): Mention that 'x' command supports a negative
        repeat count.

2016-06-09  Toshihito Kikuchi  <k.toshihito@yahoo.de>

        * MAINTAINERS (Write After Approval): Add Toshihito Kikuchi.

2016-06-09  Tom Tromey  <tom@tromey.com>

        PR python/19819:
        * python/py-xmethods.c (invoke_method_name)
        (py_get_result_type_method_name, py_invoke_method_name): Remove.
        (gdbpy_initialize_xmethods): Don't initialize
        py_invoke_method_name, py_get_result_type_method_name.

2016-06-07  Simon Marchi  <simon.marchi@ericsson.com>

        * mi/mi-interp.c (mi_record_changed): Add missing braces.

2016-06-07  Bernhard Heckel  <bernhard.heckel@intel.com>

        * findvar.c (follow_static_link): Check for valid pointer.

2016-06-06  Simon Marchi  <simon.marchi@ericsson.com>

        * NEWS: Mention the new fields in =record-started.
        * common/btrace-common.h (btrace_format_short_string): New function
        declaration.
        * common/btrace-common.c (btrace_format_short_string): New
        function.
        * mi/mi-interp.c (mi_record_changed): Output method and format
        fields in the =record-started record.
        * record-btrace.c (record_btrace_open): Adapt record_changed
        notification.
        * record-full.c (record_full_open): Likewise.
        * record.c (cmd_record_stop): Likewise.

2016-06-02  Jon Turney  <jon.turney@dronecode.org.uk>

        * windows-nat.c (handle_output_debug_string): Return type of
        gdb_signal_from_host() is gdb_signal, not an int.
        (windows_get_exec_module_filename): Add pointer casts for C++.

2016-06-02  Tom Tromey  <tom@tromey.com>

        PR python/18984:
        * python/python.c (gdbpy_solib_name): Use GDB_PY_LLU_ARG.

2016-06-01  Pedro Alves  <palves@redhat.com>

        * remote-fileio.c (remote_fio_ctrl_c_flag, remote_fio_sa)
        (remote_fio_osa)
        (remote_fio_ofunc, remote_fileio_sig_init, remote_fileio_sig_set)
        (remote_fileio_sig_exit, remote_fileio_ctrl_c_signal_handler):
        Delete.
        (remote_fileio_o_quit_handler): New global.
        (remote_fileio_quit_handler): New function.
        (remote_fileio_reply): Check the quit flag instead of the custom
        'remote_fio_ctrl_c_flag' flag.  Restore the quit handler instead
        of changing the SIGINT handler.
        (do_remote_fileio_request): Override the quit handler instead of
        changing the SIGINT handler.

2016-06-01  Nick Clifton  <nickc@redhat.com>

        * common/common-utils.c (xmalloc_failed): New function.  Provided
        so that the version in libiberty is not linked in.

2016-06-01  Markus Metzger  <markus.t.metzger@intel.com>

        * infcmd.c (skip_finish_frames): New.
        (finish_command): Call skip_finish_frames.

2016-06-01  Yao Qi  <yao.qi@linaro.org>

        PR remote/19998
        * remote-fileio.c (remote_fileio_ctrl_c_signal_handler): Call
        quit_serial_event_set.

2016-06-01  Joel Brobecker  <brobecker@adacore.com>

        GDB 7.11.1 released.

2016-05-31  Martin Galvan  <martin.galvan@tallertechnologies.com>

        PR c++/19893
        * dwarf2loc.c (coerce_pieced_ref, indirect_synthetic_pointer,
        fetch_const_value_from_synthetic_pointer): New functions.
        (indirect_pieced_value): Move lower half to indirect_synthetic_pointer.
        (pieced_value_funcs): Implement coerce_ref.
        * valops.c (value_addr): Call coerce_ref for synthetic references.
        * valprint.c (valprint_check_validity): Return true for synthetic
        references.  Also, don't show "<synthetic pointer>" if they reference
        addressable values.
        (generic_val_print_ref): Handle synthetic references.  Also move some
        code to print_ref_address.
        (print_ref_address, get_value_addr_contents): New functions.

2016-05-30  Jan Kratochvil  <jan.kratochvil@redhat.com>

        PR c++/15231
        * dwarf2read.c (enum pc_bounds_kind): Add PC_BOUNDS_INVALID.
        (process_psymtab_comp_unit_reader, read_func_scope): Adjust callers.
        (read_lexical_block_scope): Import DIEs from bare DW_TAG_lexical_block.
        (read_call_site_scope): Adjust callers.
        (dwarf2_get_pc_bounds): Implement pc_bounds_invalid.
        (dwarf2_get_subprogram_pc_bounds, get_scope_pc_bounds): Adjust callers.

2016-05-30  Jan Kratochvil  <jan.kratochvil@redhat.com>

        Code cleanup: dwarf2_get_pc_bounds: -1/0/+1 -> enum
        * dwarf2read.c (enum pc_bounds_kind) New.
        (dwarf2_get_pc_bounds): Use it in the declaration.
        (process_psymtab_comp_unit_reader): Adjust caller.  Rename has_pc_info
        to cu_bounds_kind.
        (read_func_scope, read_lexical_block_scope, read_call_site_scope):
        Adjust callers.
        (dwarf2_get_pc_bounds): Use enum pc_bounds_kind in the definition.
        (dwarf2_get_subprogram_pc_bounds, get_scope_pc_bounds): Adjust callers.

2016-05-29  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * NEWS (QCatchSyscalls): Remove the parameter.  Include ...
        (QCatchSyscalls:1 in qSupported) ... this separate entry which got
        deleted.

2016-05-29  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * NEWS (N stop reply): Remove empty line.

2016-05-28  Alan Modra  <amodra@gmail.com>

        * compile/compile-object-load.c (link_callbacks_multiple_definition,
        link_callbacks_warning, link_callbacks_undefined_symbol,
        link_callbacks_undefined_symbol, link_callbacks_reloc_overflow,
        link_callbacks_reloc_dangerous,
        link_callbacks_unattached_reloc): Return void.

2016-05-27  Andrew Burgess  <andrew.burgess@embecosm.com>

        * opencl-lang.c (evaluate_subexp_opencl): If
        EVAL_AVOID_SIDE_EFFECTS mode, forward the VALUE_LVAL attribute to
        the returned value in the STRUCTOP_STRUCT case.

2016-05-27  Andrew Burgess  <andrew.burgess@embecosm.com>

        * eval.c (evaluate_subexp_standard): If EVAL_AVOID_SIDE_EFFECTS
        mode, forward the VALUE_LVAL attribute to the returned value in
        the STRUCTOP_PTR case.

2016-05-25  Tom Tromey  <tom@tromey.com>

        * python/py-value.c (value_object_as_number): Use correct spelling
        of HAVE_LIBPYTHON2_4.

2016-05-25  Bernhard Heckel  <bernhard.heckel@intel.com>

        * f-typeprint.c (f_type_print_base): Replace 0 by show.

2016-05-25  Bernhard Heckel  <bernhard.heckel@intel.com>

        * f-typeprint.c (f_type_print_base): Decrease show by one.

2016-05-25  Bernhard Heckel  <bernhard.heckel@intel.com>

        * f-typeprint.c (f_type_print_base): Don't print fields when show < 0.

2016-05-25  Bernhard Heckel  <bernhard.heckel@intel.com>

        * f-typeprint.c (f_type_print_base): Take print level into account.

2016-05-24  Tom Tromey  <tom@tromey.com>

        PR python/17386:
        * python/py-value.c (value_object_as_number): Add
        nb_inplace_floor_divide, nb_inplace_true_divide, nb_index.

2016-05-24  Tom Tromey  <tom@tromey.com>

        * python/py-value.c (value_object_as_number): Add
        nb_inplace_divide for Python 2.

2016-05-23  Tom Tromey  <tom@tromey.com>

        PR python/17981:
        * python/py-breakpoint.c (gdbpy_breakpoints): Return a new tuple
        when there are no breakpoints.

2016-05-24  Pedro Alves  <palves@redhat.com>

        PR gdb/19828
        * linux-nat.c (attach_proc_task_lwp_callback): Mark the lwp
        resumed, and add the thread to GDB's thread list.

2016-05-24  Pedro Alves  <palves@redhat.com>

        PR gdb/19828
        * linux-nat.c (get_pending_status): If the thread reported the
        event to the core and it's pending, use the pending status signal
        number.

2016-05-24  Pedro Alves  <palves@redhat.com>

        PR gdb/19828
        * linux-nat.c (lwp_lwpid_htab): New htab.
        (lwp_info_hash, lwp_lwpid_htab_eq, lwp_lwpid_htab_create)
        (lwp_lwpid_htab_add_lwp): New functions.
        (lwp_list): Tweak comment.
        (lwp_list_add, lwp_list_remove, lwp_lwpid_htab_remove_pid): New
        functions.
        (purge_lwp_list): Rewrite, using htab_traverse_noresize.
        (add_initial_lwp): Add lwp to htab too.  Use lwp_list_add.
        (delete_lwp): Use lwp_list_remove.  Remove htab too.
        (find_lwp_pid): Search in htab.
        (_initialize_linux_nat): Call lwp_lwpid_htab_create.
        * linux-nat.h (struct lwp_info) <prev>: New field.

2016-05-24  Pedro Alves  <palves@redhat.com>

        PR gdb/19828
        * linux-nat.c (lwp_lwpid_htab): New htab.
        (lwp_info_hash, lwp_lwpid_htab_eq, lwp_lwpid_htab_create)
        (lwp_lwpid_htab_add_lwp): New functions.
        (lwp_list): Tweak comment.
        (lwp_list_add, lwp_list_remove, lwp_lwpid_htab_remove_pid): New
        functions.
        (purge_lwp_list): Rewrite, using htab_traverse_noresize.
        (add_initial_lwp): Add lwp to htab too.  Use lwp_list_add.
        (delete_lwp): Use lwp_list_remove.  Remove htab too.
        (find_lwp_pid): Search in htab.
        (_initialize_linux_nat): Call lwp_lwpid_htab_create.
        * linux-nat.h (struct lwp_info) <prev>: New field.

2016-05-24  Pedro Alves  <palves@redhat.com>

        PR gdb/19828
        * linux-nat.c (linux_resume_one_lwp_throw): Clear the LWP's core
        field.
        (linux_nat_update_thread_list): Don't fetch the core if already
        known.

2016-05-24  Pedro Alves  <palves@redhat.com>

        PR gdb/19828
        * linux-tdep.c (find_mapping_size): Delete.
        (linux_vsyscall_range_raw): Rewrite reading from
        /proc/PID/task/PID/maps directly instead of using
        gdbarch_find_memory_regions.

2016-05-24  Pedro Alves  <palves@redhat.com>

        PR gdb/19828
        * linux-nat.c (report_thread_events): New global.
        (linux_handle_extended_wait): Report
        TARGET_WAITKIND_THREAD_CREATED if thread event reporting is
        enabled.
        (wait_lwp, linux_nat_filter_event): Report all thread exits if
        thread event reporting is enabled.  Remove comment.
        (filter_exit_event): New function.
        (linux_nat_wait_1): Use it.
        (linux_nat_thread_events): New function.
        (linux_nat_add_target): Install it as target_thread_events method.

2016-05-24  Yan-Ting Lin  <currygt52@gmail.com>

        * MAINTAINERS (Write After Approval): Add "Yan-Ting Lin".

2016-05-23  Yao Qi  <yao.qi@arm.com>

        * arch-utils.c (default_code_of_frame_writable): New function.
        * arch-utils.h (default_code_of_frame_writable): Declare.
        * arm-tdep.c (arm_code_of_frame_writable): New function.
        (arm_gdbarch_init): Install gdbarch method
        code_of_frame_writable if the target is M-profile.
        * frame.c (skip_unwritable_frames): New function.
        * frame.h (skip_unwritable_frames): Declare.
        * gdbarch.sh (code_of_frame_writable): New.
        * gdbarch.c, gdbarch.h: Re-generated.
        * infcmd.c (finish_command): Call skip_unwritable_frames.

2016-05-23  Tom Tromey  <tom@tromey.com>

        PR python/19438, PR python/18393:
        * python/py-objfile.c (objfpy_initialize): Initialize self->dict.
        * python/py-progspace.c (pspy_initialize): Initialize self->dict.

2016-05-23  Gary Benson  <gbenson@redhat.com>

        * nat/gdb_thread_db.h (td_thr_validate_ftype): Remove typedef.
        * linux-thread-db.c (struct thread_db_info) <td_thr_validate_p>:
        Remove field.
        (try_thread_db_load_1): Remove td_thr_validate initialization.

2016-05-23  Jon Boden  <jon@ubuntubsd.org>  (tiny change)

        * configure.ac: Search for libutil-freebsd as alternative to libutil.
        * configure: Re-generated.

2016-05-19  Andreas Schwab  <schwab@suse.de>

        * ia64-libunwind-tdep.c (libunwind_descr): Add cast from void *.
        (libunwind_frame_set_descr): Likewise.
        (libunwind_frame_cache): Likewise.
        (libunwind_frame_dealloc_cache): Likewise.
        (libunwind_frame_sniffer): Likewise.
        (libunwind_search_unwind_table): Likewise.
        (libunwind_sigtramp_frame_sniffer): Likewise.
        (libunwind_get_reg_special): Likewise.
        (libunwind_load): Likewise.
        * ia64-linux-nat.c (ia64_linux_fetch_register): Likewise.
        (ia64_linux_store_register): Likewise.
        (ia64_linux_xfer_partial): Likewise.
        * ia64-tdep.c (ia64_access_reg): Likewise.
        (ia64_access_fpreg): Likewise.
        (ia64_access_rse_reg): Likewise.
        (ia64_access_rse_fpreg): Likewise.

2016-05-18  Tom Tromey  <tom@tromey.com>

        * rust-lang.c (rust_subscript): Initialize "high".

2016-05-17  Simon Marchi  <simon.marchi@ericsson.com>

        PR gdb/20045
        * mi/mi-main.c (mi_on_resume): Call target_can_async_p instead
        of target_is_async_p.

2016-05-17  Simon Marchi  <simon.marchi@ericsson.com>

        PR gdb/18077
        * mi/mi-main.c (run_one_inferior): Use run target to determine
        whether to run async or not.
        (mi_cmd_exec_run): Likewise.

2016-05-17  Tom Tromey  <tom@tromey.com>

        * std-operator.def (OP_RANGE): Rename from OP_F90_RANGE.
        * rust-lang.c: Don't include f-lang.h.
        (rust_range, rust_compute_range, rust_subscript)
        (rust_evaluate_subexp): Update.
        * rust-exp.y: Don't include f-lang.h.
        (ast_range, convert_ast_to_expression): Update.
        * parse.c (operator_length_standard): Update.
        * f-lang.h (enum f90_range_type): Move to expression.h.
        * f-exp.y: Use OP_RANGE.
        * expression.h (enum range_type): New enum; renamed from
        f90_range_type.
        * expprint.c: Don't include f-lang.h.
        (print_subexp_standard, dump_subexp_body_standard): Use OP_RANGE.
        * eval.c (value_f90_subarray, evaluate_subexp_standard): Update.

2016-05-17  Tom Tromey  <tom@tromey.com>

        * NEWS: Add Rust item.

2016-05-17  Tom Tromey  <tom@tromey.com>
            Manish Goregaokar <manishsmail@gmail.com>

        * symtab.c (symbol_find_demangled_name): Handle Rust.
        * symfile.c (init_filename_language_table): Treat ".rs" as Rust.
        * std-operator.def (STRUCTOP_ANONYMOUS, OP_RUST_ARRAY): New
        constants.
        * rust-lang.h: New file.
        * rust-lang.c: New file.
        * rust-exp.y: New file.
        * dwarf2read.c (read_file_scope): Add Rust producer sniffing.
        (dwarf2_compute_name, read_func_scope, read_structure_type)
        (read_base_type, read_subrange_type, set_cu_language)
        (new_symbol_full, determine_prefix): Handle Rust.
        * defs.h (enum language) <language_rust>: New constant.
        * Makefile.in (SFILES): Add rust-exp.y, rust-lang.c.
        (COMMON_OBS): Add rust-exp.o, rust-lang.o.

2016-05-17  Tom Tromey  <tom@tromey.com>

        * valprint.h (struct generic_val_print_array) <array_start,
        array_end>: New fields.
        * valprint.c (generic_val_print_array): Add "decorations"
        parameter.  Use "array_start", "array_end".
        (generic_val_print) <TYPE_CODE_ARRAY>: Update.
        * p-valprint.c (p_decorations): Update.
        * m2-valprint.c (m2_decorations): Update.
        * f-valprint.c (f_decorations): Update.
        * c-valprint.c (c_decorations): Update.

2016-05-17  Tom Tromey  <tom@tromey.com>

        * NEWS: Add "maint selftest" entry.
        * selftest.h: New file.
        * selftest.c: New file.
        * maint.c: Include selftest.h.
        (maintenance_selftest): New function.
        (_initialize_maint_cmds): Add "maint selftest" command.
        * configure.ac (GDB_SELF_TEST): Maybe define.
        * config.in, configure: Rebuild.
        * Makefile.in (SFILES): Add selftest.c.
        (COMMON_OBS): Add selftest.o.

2016-05-17  Tom Tromey  <tom@tromey.com>

        * expprint.c: Include f-lang.h.
        (print_subexp_standard, dump_subexp_body_standard): Handle
        OP_F90_RANGE.

2016-05-17  Tom Tromey  <tom@tromey.com>

        * Makefile.in (init.c): Search .y files for initialization
        functions.

2016-05-12  Doug Evans  <dje@google.com>

        PR symtab/19999
        * dwarf2loc.c (dwarf2_find_location_expression): For DWO files still
        add base_offset.

2016-05-10  Trevor Saunders  <tbsaunde+binutils@tbsaunde.org>

        * iq2000-tdep.c (iq2000_scan_prologue): Remove if that shouldn't guard
        anything.
        * linespec.c (add_sal_to_sals): Restore call to symtab_to_fullname.

2016-05-10  Thomas Preud'homme  <thomas.preudhomme@arm.com>

        * arm-tdep.c (arm_elf_make_msymbol_special): Use
        ARM_GET_SYM_BRANCH_TYPE to get branch type of a symbol.

2016-05-07  Trevor Saunders  <tbsaunde+binutils@tbsaunde.org>

        * aarch64-linux-tdep.c (aarch64_linux_sigframe_init): Remove unused
        variables.
        * aarch64-tdep.c (aarch64_skip_prologue): Likewise.
        (aarch64_scan_prologue): Likewise.
        (aarch64_prologue_prev_register): Likewise.
        (aarch64_dwarf2_prev_register): Likewise.
        (pass_in_v): Likewise.
        (aarch64_push_dummy_call): Likewise.
        (aarch64_breakpoint_from_pc): Likewise.
        (aarch64_return_in_memory): Likewise.
        (aarch64_return_value): Likewise.
        (aarch64_displaced_step_b_cond): Likewise.
        (aarch64_displaced_step_cb): Likewise.
        (aarch64_displaced_step_tb): Likewise.
        (aarch64_gdbarch_init): Likewise.
        (aarch64_process_record): Likewise.
        * alpha-mdebug-tdep.c (alpha_mdebug_init_abi): Likewise.
        * alpha-tdep.c (_initialize_alpha_tdep): Likewise.
        * amd64-dicos-tdep.c (amd64_dicos_init_abi): Likewise.
        * amd64-linux-tdep.c (amd64_dtrace_parse_probe_argument): Likewise.
        * amd64-tdep.c (fixup_riprel): Likewise.
        * amd64-windows-tdep.c (amd64_windows_frame_decode_epilogue): Likewise.
        (amd64_windows_frame_decode_insns): Likewise.
        (amd64_windows_frame_cache): Likewise.
        (amd64_windows_frame_prev_register): Likewise.
        (amd64_windows_frame_this_id): Likewise.
        (amd64_windows_init_abi): Likewise.
        * arm-linux-tdep.c (arm_linux_get_syscall_number): Likewise.
        (arm_linux_get_next_pcs_syscall_next_pc): Likewise.
        * arm-symbian-tdep.c (arm_symbian_init_abi): Likewise.
        * arm-tdep.c (arm_make_epilogue_frame_cache): Likewise.
        (arm_epilogue_frame_prev_register): Likewise.
        (arm_record_vdata_transfer_insn): Likewise.
        (arm_record_exreg_ld_st_insn): Likewise.
        * auto-load.c (execute_script_contents): Likewise.
        (print_scripts): Likewise.
        * avr-tdep.c (avr_frame_prev_register): Likewise.
        (avr_push_dummy_call): Likewise.
        * bfin-linux-tdep.c (bfin_linux_sigframe_init): Likewise.
        * bfin-tdep.c (bfin_gdbarch_init): Likewise.
        * blockframe.c (find_pc_partial_function_gnu_ifunc): Likewise.
        * break-catch-throw.c (fetch_probe_arguments): Likewise.
        * breakpoint.c (breakpoint_xfer_memory): Likewise.
        (breakpoint_init_inferior): Likewise.
        (breakpoint_inserted_here_p): Likewise.
        (software_breakpoint_inserted_here_p): Likewise.
        (hardware_breakpoint_inserted_here_p): Likewise.
        (bpstat_what): Likewise.
        (break_range_command): Likewise.
        (save_breakpoints): Likewise.
        * coffread.c (coff_symfile_read): Likewise.
        * cris-tdep.c (cris_push_dummy_call): Likewise.
        (cris_scan_prologue): Likewise.
        (cris_register_size): Likewise.
        (_initialize_cris_tdep): Likewise.
        * d-exp.y: Likewise.
        * dbxread.c (dbx_read_symtab): Likewise.
        (process_one_symbol): Likewise.
        (coffstab_build_psymtabs): Likewise.
        (elfstab_build_psymtabs): Likewise.
        * dicos-tdep.c (dicos_init_abi): Likewise.
        * disasm.c (do_mixed_source_and_assembly): Likewise.
        (gdb_disassembly): Likewise.
        * dtrace-probe.c (dtrace_process_dof): Likewise.
        * dwarf2read.c (error_check_comp_unit_head): Likewise.
        (build_type_psymtabs_1): Likewise.
        (skip_one_die): Likewise.
        (process_imported_unit_die): Likewise.
        (dwarf2_physname): Likewise.
        (read_file_scope): Likewise.
        (setup_type_unit_groups): Likewise.
        (create_dwo_cu_reader): Likewise.
        (create_dwo_cu): Likewise.
        (create_dwo_unit_in_dwp_v1): Likewise.
        (create_dwo_unit_in_dwp_v2): Likewise.
        (lookup_dwo_unit_in_dwp): Likewise.
        (free_dwo_file): Likewise.
        (check_producer): Likewise.
        (dwarf2_add_typedef): Likewise.
        (dwarf2_add_member_fn): Likewise.
        (read_unsigned_leb128): Likewise.
        (read_signed_leb128): Likewise.
        (dwarf2_const_value): Likewise.
        (follow_die_sig_1): Likewise.
        (dwarf_decode_macro_bytes): Likewise.
        * extension.c (restore_active_ext_lang): Likewise.
        * frv-linux-tdep.c (frv_linux_sigtramp_frame_cache): Likewise.
        * ft32-tdep.c (ft32_analyze_prologue): Likewise.
        * gdbtypes.c (lookup_typename): Likewise.
        (resolve_dynamic_range): Likewise.
        (check_typedef): Likewise.
        * h8300-tdep.c (h8300_is_argument_spill): Likewise.
        (h8300_gdbarch_init): Likewise.
        * hppa-tdep.c (hppa32_push_dummy_call): Likewise.
        (hppa_frame_this_id): Likewise.
        (_initialize_hppa_tdep): Likewise.
        * hppanbsd-tdep.c (hppanbsd_sigtramp_cache_init): Likewise.
        * hppaobsd-tdep.c (hppaobsd_supply_fpregset): Likewise.
        * i386-dicos-tdep.c (i386_dicos_init_abi): Likewise.
        * i386-tdep.c (i386_bnd_type): Likewise.
        (i386_gdbarch_init): Likewise.
        (i386_mpx_bd_base): Likewise.
        * i386nbsd-tdep.c (i386nbsd_sigtramp_cache_init): Likewise.
        * i386obsd-tdep.c (i386obsd_elf_init_abi): Likewise.
        * ia64-tdep.c (examine_prologue): Likewise.
        (ia64_frame_cache): Likewise.
        (ia64_push_dummy_call): Likewise.
        * infcmd.c (finish_command_fsm_async_reply_reason): Likewise.
        (default_print_one_register_info): Likewise.
        * infrun.c (infrun_thread_ptid_changed): Likewise.
        (thread_still_needs_step_over): Likewise.
        (stop_all_threads): Likewise.
        (restart_threads): Likewise.
        (keep_going_stepped_thread): Likewise.
        * iq2000-tdep.c (iq2000_scan_prologue): Likewise.
        * language.c (language_init_primitive_type_symbols): Likewise.
        * linespec.c (add_sal_to_sals): Likewise.
        * linux-nat.c (status_callback): Likewise.
        (kill_unfollowed_fork_children): Likewise.
        (linux_nat_kill): Likewise.
        * linux-tdep.c (linux_fill_prpsinfo): Likewise.
        * linux-thread-db.c (thread_db_notice_clone): Likewise.
        (record_thread): Likewise.
        * location.c (string_to_event_location_basic): Likewise.
        * m32c-tdep.c (m32c_prev_register): Likewise.
        * m32r-linux-tdep.c (m32r_linux_init_abi): Likewise.
        * m32r-tdep.c (decode_prologue): Likewise.
        * m68klinux-tdep.c (m68k_linux_sigtramp_frame_cache): Likewise.
        * machoread.c (macho_symtab_read): Likewise.
        (macho_symfile_read): Likewise.
        (macho_symfile_offsets): Likewise.
        * maint.c (set_per_command_cmd): Likewise.
        * mi/mi-cmd-stack.c (mi_cmd_stack_list_locals): Likewise.
        (mi_cmd_stack_list_variables): Likewise.
        * mi/mi-main.c (mi_cmd_exec_run): Likewise.
        (output_register): Likewise.
        (mi_cmd_execute): Likewise.
        (mi_cmd_trace_define_variable): Likewise.
        (print_variable_or_computed): Likewise.
        * minsyms.c (prim_record_minimal_symbol_full): Likewise.
        * mn10300-tdep.c (mn10300_frame_prev_register): Likewise.
        * msp430-tdep.c (msp430_pseudo_register_write): Likewise.
        * mt-tdep.c (mt_registers_info): Likewise.
        * nios2-tdep.c (nios2_analyze_prologue): Likewise.
        (nios2_push_dummy_call): Likewise.
        (nios2_frame_unwind_cache): Likewise.
        (nios2_stub_frame_cache): Likewise.
        (nios2_stub_frame_sniffer): Likewise.
        (nios2_gdbarch_init): Likewise.
        * ppc-ravenscar-thread.c: Likewise.
        * ppcfbsd-tdep.c (ppcfbsd_sigtramp_frame_cache): Likewise.
        * python/py-evts.c (add_new_registry): Likewise.
        * python/py-finishbreakpoint.c (bpfinishpy_init): Likewise.
        (bpfinishpy_detect_out_scope_cb): Likewise.
        * python/py-framefilter.c (py_print_value): Likewise.
        * python/py-inferior.c (infpy_write_memory): Likewise.
        * python/py-infevents.c (create_inferior_call_event_object): Likewise.
        * python/py-infthread.c (thpy_get_ptid): Likewise.
        * python/py-linetable.c (ltpy_get_pcs_for_line): Likewise.
        (ltpy_get_all_source_lines): Likewise.
        (ltpy_is_valid): Likewise.
        (ltpy_iternext): Likewise.
        * python/py-symtab.c (symtab_and_line_to_sal_object): Likewise.
        * python/py-unwind.c (pyuw_object_attribute_to_pointer): Likewise.
        (unwind_infopy_str): Likewise.
        * python/py-varobj.c (py_varobj_get_iterator): Likewise.
        * ravenscar-thread.c (ravenscar_inferior_created): Likewise.
        * rs6000-aix-tdep.c (rs6000_push_dummy_call): Likewise.
        * rs6000-lynx178-tdep.c (rs6000_lynx178_push_dummy_call): Likewise.
        * rs6000-tdep.c (ppc_deal_with_atomic_sequence): Likewise.
        * s390-linux-tdep.c (s390_supply_tdb_regset): Likewise.
        (s390_frame_prev_register): Likewise.
        (s390_dwarf2_frame_init_reg): Likewise.
        (s390_record_vr): Likewise.
        (s390_process_record): Likewise.
        * score-tdep.c (score_push_dummy_call): Likewise.
        (score3_analyze_prologue): Likewise.
        * sh-tdep.c (sh_extract_return_value_nofpu): Likewise.
        * sh64-tdep.c (sh64_analyze_prologue): Likewise.
        (sh64_push_dummy_call): Likewise.
        (sh64_extract_return_value): Likewise.
        (sh64_do_fp_register): Likewise.
        * solib-aix.c (solib_aix_get_section_offsets): Likewise.
        * solib-darwin.c (darwin_read_exec_load_addr_from_dyld): Likewise.
        (darwin_solib_read_all_image_info_addr): Likewise.
        * solib-dsbt.c (enable_break): Likewise.
        * solib-frv.c (enable_break2): Likewise.
        (frv_fdpic_find_canonical_descriptor): Likewise.
        * solib-svr4.c (svr4_handle_solib_event): Likewise.
        * sparc-tdep.c (sparc_skip_stack_check): Likewise.
        * sparc64-linux-tdep.c (sparc64_linux_get_longjmp_target): Likewise.
        * sparcobsd-tdep.c (sparc32obsd_init_abi): Likewise.
        * spu-tdep.c (info_spu_dma_cmdlist): Likewise.
        * stack.c (read_frame_local): Likewise.
        * symfile.c (symbol_file_add_separate): Likewise.
        (remove_symbol_file_command): Likewise.
        * symmisc.c (maintenance_print_one_line_table): Likewise.
        * symtab.c (symbol_cache_flush): Likewise.
        (basic_lookup_transparent_type): Likewise.
        (sort_search_symbols_remove_dups): Likewise.
        * target.c (target_memory_map): Likewise.
        (target_detach): Likewise.
        (target_resume): Likewise.
        (acquire_fileio_fd): Likewise.
        (target_store_registers): Likewise.
        * thread.c (print_thread_info_1): Likewise.
        * tic6x-tdep.c (tic6x_analyze_prologue): Likewise.
        * tilegx-linux-tdep.c (tilegx_linux_sigframe_init): Likewise.
        * tilegx-tdep.c (tilegx_push_dummy_call): Likewise.
        (tilegx_analyze_prologue): Likewise.
        (tilegx_stack_frame_destroyed_p): Likewise.
        (tilegx_frame_cache): Likewise.
        * tracefile.c (trace_save): Likewise.
        * tracepoint.c (encode_actions_and_make_cleanup): Likewise.
        (start_tracing): Likewise.
        (print_one_static_tracepoint_marker): Likewise.
        * tui/tui.c (tui_enable): Likewise.
        * valops.c (value_struct_elt_bitpos): Likewise.
        (find_overload_match): Likewise.
        (find_oload_champ): Likewise.
        * value.c (value_contents_copy_raw): Likewise.
        * windows-tdep.c (windows_get_tlb_type): Likewise.
        * x86-linux-nat.c (x86_linux_enable_btrace): Likewise.
        * xcoffread.c (record_minimal_symbol): Likewise.
        (scan_xcoff_symtab): Likewise.
        * xtensa-tdep.c (execute_code): Likewise.
        (xtensa_gdbarch_init): Likewise.
        (_initialize_xtensa_tdep): Likewise.

2016-05-04  Ulrich Weigand  <uweigand@de.ibm.com>

        * spu-linux-nat.c (spu_bfd_iovec_pread): Add pointer cast for C++.
        (spu_bfd_open): Likewise.

2016-05-04  Yao Qi  <yao.qi@linaro.org>

        PR gdb/19947
        * corefile.c (read_memory): Rename it to ...
        (read_memory_object): ... it.  Add parameter object.
        (read_memory): Call read_memory_object.
        (read_stack): Likewise.
        (read_code): Likewise.

2016-05-03  Yunlian Jiang <yunlian@google.com>
            Doug Evans  <dje@google.com>

        PR symtab/19914
        * dwarf2read.c (open_and_init_dwp_file): Look at backlink if objfile
        is separate debug file.

2016-05-03  Don Breazeal <donb@codesourcery.com>

        * serial.h (gdb_pipe): Fix argument names in comment.

2016-05-03  Pedro Alves <palves@redhat.com>

        PR python/20037
        * python/python.c (_initialize_python) [IS_PY3K]: xstrdup/xfree
        oldloc.

2016-05-03  Pedro Alves <palves@redhat.com>

        * python/python.c (_initialize_python) [IS_PY3K]: Remove dead
        code.

2016-05-03  Pedro Alves  <palves@redhat.com>

        * configure.ac (PYTHON_LIBS): Sed away "-Xlinker -export-dynamic".
        * configure: Regenerate.

2016-05-03  Pedro Alves  <palves@redhat.com>

        * configure.ac (checking for the dynamic export flag): Add
        $PYTHON_CPPFLAGS to CPPFLAGS.
        * configure: Regenerate.

2016-05-03  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

        * symfile.c (find_pc_overlay): Add braces to avoid -Wparentheses
        warning.
        (find_pc_mapped_section): Likewise.
        (list_overlays_command): Likewise.

2016-05-02  Eli Zaretskii  <eliz@gnu.org>

        * windows-nat.c (_initialize_check_for_gdb_ini): Fix off-by-one
        error in allocation of space for "$HOME/.gdbinit" string.  This
        caused GDB to abort on startup whenever a '~/gdb.ini' file was
        actually found, because xsnprintf would hit an assertion
        violation.

2016-04-28  Simon Marchi  <simon.marchi@ericsson.com>

        * cli/cli-decode.c (help_cmd_list): Do not list commands that
        are deprecated.

2016-04-27  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * remote.c (remote_start_remote): Detect PACKET_vFile_setfs.support.

2016-04-27  Martin Galvan  <martin.galvan@tallertechnologies.com>

        * c-valprint.c (c_value_print): Always convert val back to reference
        type if we converted it to a pointer type.

2016-04-27  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * configure.ac: Enhance configure check for babeltrace to reject
        non-C++-enabled versions.
        * configure: Regenerate.

2016-04-26  Sanimir Agovic  <sanimir.agovic@intel.com>
            Keven Boell  <keven.boell@intel.com>
            Bernhard Heckel  <bernhard.heckel@intel.com>

        * f-valprint.c (f77_create_arrayprint_offset_tbl): Remove
        function.
        (F77_DIM_SIZE, F77_DIM_OFFSET): Remove macro.
        (f77_print_array_1): Use value_subscript to subscript a
        value array.
        (f77_print_array): Remove call to f77_create_arrayprint_offset_tbl.
        (f_val_print): Use value_field to construct a field value.

2016-04-26  Bernhard Heckel  <bernhard.heckel@intel.com>

        * valarith.c (value_address): Resolve dynamic types.

2016-04-26  Bernhard Heckel  <bernhard.heckel@intel.com>
            Keven Boell  <kevel.boell@intel.com>

        * NEWS: Add new supported features for fortran.
        * gdbtypes.c (remove_dyn_prop): New.
        (resolve_dynamic_struct): Keep type length for fortran structs.
        * gdbtypes.h: Forward declaration of new function.
        * value.c (value_address): Return dynamic resolved location of a value.
        (set_value_component_location): Adjust the value address
        for single value prints.
        (value_primitive_field): Support value types with a dynamic location.
        (set_internalvar): Remove dynamic location property of
        internal variables.

2016-04-25  Pedro Alves  <palves@redhat.com>
            Yao Qi  <yao.qi@linaro.org>

        * mem-break.c (set_raw_breakpoint_at): Create a raw breakpoint
        object.  Insert it if it is not inserted yet.  Increase the
        refcount and link it into the proc's raw breakpoint list.

2016-04-25  Yao Qi  <yao.qi@linaro.org>

        * breakpoint.c (should_be_inserted): Return 0 if the location's
        owner is not single step breakpoint or single step breakpoint's
        thread isn't the thread which is stepping past a breakpoint.
        * gdbarch.sh (software_single_step): Update comments.
        * gdbarch.h: Regenerated.
        * infrun.c (struct step_over_info) <thread>: New field.
        (set_step_over_info): New argument 'thread'.  Callers updated.
        (clear_step_over_info): Set field thread to -1.
        (thread_is_stepping_over_breakpoint): New function.
        * infrun.h (thread_is_stepping_over_breakpoint): Declaration.

2016-04-22  Edjunior Barbosa Machado  <emachado@linux.vnet.ibm.com>

        * ppc-linux-nat.c (ppc_linux_read_description): Use PPC_FEATURE_HAS_VSX
        and PPC_FEATURE_HAS_ALTIVEC to check if such features are available.

2016-04-22  Yao Qi  <yao.qi@linaro.org>

        * valops.c (read_value_memory): New local variable 'stack'.
        Set it to either TARGET_OBJECT_STACK_MEMORY or
        TARGET_OBJECT_MEMORY.

2016-04-22  Pedro Alves  <palves@redhat.com>

        * ada-exp.y: Remove all yy symbol remappings.
        (GDB_YY_REMAP_PREFIX): Define.
        Include "yy-remap.h".
        * ada-lang.c (ada_language_defn): Adjust.
        * ada-lang.h (ada_error): Rename to ...
        (ada_yyerror): ... this.
        * c-exp.y: Remove all yy symbol remappings.
        (GDB_YY_REMAP_PREFIX): Define.
        Include "yy-remap.h".
        * c-lang.c (c_language_defn, cplus_language_defn)
        (asm_language_defn, minimal_language_defn): Adjust.
        * c-lang.h (c_error): Rename to ...
        (c_yyerror): ... this.
        * d-exp.y: Remove all yy symbol remappings.
        (GDB_YY_REMAP_PREFIX): Define.
        Include "yy-remap.h".
        * d-lang.c (d_language_defn): Adjust.
        * d-lang.h (d_error): Rename to ...
        (d_yyerror): ... this.
        * f-exp.y: Remove all yy symbol remappings.
        (GDB_YY_REMAP_PREFIX): Define.
        Include "yy-remap.h".
        * f-lang.c (f_language_defn): Adjust.
        * f-lang.h (f_error): Rename to ...
        (f_yyerror): ... this.
        * go-exp.y: Remove all yy symbol remappings.
        (GDB_YY_REMAP_PREFIX): Define.
        Include "yy-remap.h".
        * go-lang.c (go_language_defn): Adjust.
        * go-lang.h (go_error): Rename to ...
        (go_yyerror): ... this.
        * jv-exp.y: Remove all yy symbol remappings.
        (GDB_YY_REMAP_PREFIX): Define.
        Include "yy-remap.h".
        * jv-lang.c (java_language_defn): Adjust.
        * jv-lang.h (java_error): Rename to ...
        (java_yyerror): ... this.
        * m2-exp.y: Remove all yy symbol remappings.
        (GDB_YY_REMAP_PREFIX): Define.
        Include "yy-remap.h".
        * m2-lang.c (m2_language_defn): Adjust.
        * m2-lang.h (m2_error): Rename to ...
        (m2_yyerror): ... this.
        * objc-exp.y: Remove all yy symbol remappings.
        (GDB_YY_REMAP_PREFIX): Define.
        Include "yy-remap.h".
        * objc-lang.c (objc_language_defn): Adjust.
        * opencl-lang.c (opencl_language_defn): Adjust.
        * p-exp.y: Remove all yy symbol remappings.
        (GDB_YY_REMAP_PREFIX): Define.
        Include "yy-remap.h".
        * p-lang.c (pascal_language_defn): Adjust.
        * p-lang.h (pascal_error): Rename to ...
        (pascal_yyerror): ... this.
        * yy-remap.h: New file.

2016-04-22  Pedro Alves  <palves@redhat.com>

        * common/common-exceptions.h (GDB_XCPT_TRY): Remove mention of
        the foreign frames issue.
        [__cplusplus] (GDB_XCPT): Define as GDB_XCPT_TRY.

2016-04-22  Pedro Alves  <palves@redhat.com>

        * common/common-exceptions.c (enum catcher_state, struct catcher)
        (current_catcher): Define in C++ mode too.
        (exceptions_state_mc_catch): Call throw_exception_sjlj instead of
        throw_exception.
        (throw_exception_sjlj, throw_exception_cxx): New functions,
        factored out from throw_exception.
        (throw_exception): Reimplement.
        * common/common-exceptions.h (exceptions_state_mc_init)
        (exceptions_state_mc_action_iter)
        (exceptions_state_mc_action_iter_1, exceptions_state_mc_catch):
        Declare in C++ mode too.
        (TRY): Rename to ...
        (TRY_SJLJ): ... this.
        (CATCH): Rename to ...
        (CATCH_SJLJ): ... this.
        (END_CATCH): Rename to ...
        (END_CATCH_SJLJ): ... this.
        [GDB_XCPT == GDB_XCPT_SJMP] (TRY, CATCH, END_CATCH): Map to SJLJ
        equivalents.
        (throw_exception): Update comments.
        (throw_exception_sjlj): Declare.
        * event-top.c (gdb_rl_callback_read_char_wrapper): Extend intro
        comment.  Wrap body in TRY_SJLJ/CATCH_SJLJ and rethrow any
        intercepted exception.
        (gdb_rl_callback_handler): New function.
        (gdb_rl_callback_handler_install): Always install
        gdb_rl_callback_handler as readline callback.

2016-04-22  Pedro Alves  <palves@redhat.com>

        * event-top.c (rl_callback_read_char_wrapper): Rename to ...
        (gdb_rl_callback_read_char_wrapper): ... this.
        (change_line_handler, gdb_setup_readline): Adjust.

2016-04-22  Yao Qi  <yao.qi@linaro.org>

        * aarch32-linux-nat.c (aarch32_gp_regcache_supply): Clear CPSR
        bits 20 to 23.

2016-04-22  Joel Brobecker  <brobecker@adacore.com>

        * MAINTAINER: Remove myself as AIX Maintainer.

2016-04-22  Maciej W. Rozycki  <macro@imgtec.com>

        * mips-tdep.c (mips_gdbarch_init): For GDB_OSABI_LINUX set
        `num_regs' to 90 rather than 79.  Where a target description is
        present adjust the setting appropriately.

2016-04-21  Pedro Alves  <palves@redhat.com>

        * common/common-exceptions.h (GDB_XCPT_TRY): Add comment.
        (GDB_XCPT): Always define as GDB_XCPT_SJMP.

2016-04-21  Pedro Alves  <palves@redhat.com>

        * aix-thread.c (pdc_read_data, pdc_write_data): Add cast.
        (aix_thread_resume): Use PTRACE_TYPE_ARG5.
        * rs6000-nat.c (rs6000_ptrace64): Use PTRACE_TYPE_ARG5.
        (rs6000_ptrace_ldinfo): Change type of 'ldi' local to void
        pointer, and cast return to gdb_byte pointer.

2016-04-21  Pedro Alves  <palves@redhat.com>

        * s390-linux-nat.c (fetch_regset, store_regset, check_regset): Use
        void * instead of gdb_byte *.

2016-04-21  Pedro Alves  <palves@redhat.com>

        * dwarf2read.c (try_open_dwop_file, open_dwo_file)
        (file_file_name, file_full_name): Add char * cast to sentinel in
        concat/reconcat calls.
        * event-top.c (top_level_prompt): Likewise.
        * guile/guile.c (initialize_scheme_side): Likewise.
        * linux-tdep.c (linux_fill_prpsinfo): Likewise.
        * macrotab.c (macro_source_fullname): Likewise.
        * main.c (get_init_files, captured_main): Likewise.
        * psymtab.c (psymtab_to_fullname): Likewise.
        * python/python.c (_initialize_python)
        (gdbpy_finish_initialization): Likewise.
        * source.c (symtab_to_fullname): Likewise.

2016-04-20  Pedro Alves  <palves@redhat.com>

        * build-with-cxx.m4 (GDB_AC_BUILD_WITH_CXX): Default to yes.
        * configure: Renegerate.

2016-04-20  Pedro Alves  <palves@redhat.com>

        * darwin-nat.c (darwin_decode_message): Use gdb_signal_from_host.

2016-04-20  Pedro Alves  <palves@redhat.com>

        * aarch64-tdep.c (aarch64_record_load_store): Change type of
        'reg_rm_val' local to ULONGEST.

2016-04-20  Pedro Alves  <palves@redhat.com>

        * darwin-nat.c (darwin_resume_thread): Add uintptr_t cast.

2016-04-20  Doug Evans  <xdje42@gmail.com>

        * symmisc.c (dump_symtab_1): Print owning compunit for identical
        blockvectors.

2016-04-20  Yao Qi  <yao.qi@linaro.org>

        * aarch32-linux-nat.c: Include "arch/arm-linux.h".

2016-04-20  Yao Qi  <yao.qi@linaro.org>

        * arm-linux-tdep.h (ARM_CPSR_GREGNUM): Move it to ...
        * arch/arm-linux.h: ... here.

2016-04-19  John Baldwin  <jhb@FreeBSD.org>

        * amd64bsd-nat.c (amd64bsd_fetch_inferior_registers): Change xstateregs
        to void *.
        (amd64bsd_store_inferior_registers): Likewise.
        * fbsd-nat.c (resume_one_thread_cb): Explicitly cast data to ptid_t *.
        (resume_all_threads_cb): Likewise.
        * i386bsd-nat.c (i386bsd_supply_gregset): Cast gregs to char *.
        (i386bsd_collect_gregset): Likewise.
        (i386bsd_fetch_inferior_registers): Change xstateregs to void *.
        (i386bsd_store_inferior_registers): Likewise.

2016-04-19  John Baldwin  <jhb@FreeBSD.org>

        * main.c (setup_alternate_signal_stack): Cast to char *.

2016-04-19  Doug Evans  <xdje42@gmail.com>

        * symmisc.c (dump_symtab_1, dump_symtab): Delete arg objfile.
        All callers updated.

2016-04-19  Doug Evans  <xdje42@gmail.com>

        PR gdb/17911
        * source.c (is_regular_file): New arg errno_ptr.
        All callers updated.

2016-04-19  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * linux-record.c (record_linux_system_call): Merge handling for
        readlink/recv/read and pipe/pipe2.

2016-04-14  Walfred Tedeschi  <walfred.tedeschi@intel.com>

        * features/i386/amd64-mpx-linux.xml: Remove AVX feature.
        * features/i386/amd64-mpx.xml: Remove AVX feature.
        * features/i386/i386-mpx-linux.xml: Remove AVX feature.
        * features/i386/i386-mpx.xml: Remove AVX feature.
        * features/i386/amd64-mpx-linux.c: Regenerate.
        * features/i386/amd64-mpx.c: Regenerate.
        * features/i386/i386-mpx-linux.c: Regenerate.
        * features/i386/i386-mpx.c: Regenerate.
        * regformats/i386/amd64-mpx-linux.dat: Regenerate.
        * regformats/i386/amd64-mpx.dat: Regenerate.
        * regformats/i386/i386-mpx-linux.dat: Regenerate.
        * regformats/i386/i386-mpx.dat: Regenerate.

2016-04-16  Walfred Tedeschi  <walfred.tedeschi@intel.com>

        * amd64-linux-tdep.c (features/i386/amd64-avx-mpx-linux.c):
        New include.
        (amd64_linux_core_read_description): Add case for
         X86_XSTATE_AVX_MPX_MASK.
        (_initialize_amd64_linux_tdep): Call initialize_tdesc_amd64_avx_mpx_linux.
        * amd64-linux-tdep.h (tdesc_amd64_avx_mpx_linux): New definition.
        * amd64-tdep.c (features/i386/amd64-avx-mpx.c): New include.
        (amd64_target_description): Add case for  X86_XSTATE_AVX_MPX_MASK.
        (_initialize_amd64_tdep): Call initialize_tdesc_amd64_avx_mpx.
        * common/x86-xstate.h (X86_XSTATE_MPX_MASK): Remove AVX bits.
        (X86_XSTATE_AVX_MPX_MASK): New case.
        * features/Makefile (i386/i386-avx-mpx, i386/i386-avx-mpx-linux)
        (i386/amd64-avx-mpx, i386/amd64-avx-mpx-linux): New rules.
        (i386/i386-avx-mpx-expedite, i386/i386-avx-mpx-linux-expedite)
        (i386/amd64-avx-mpx-expedite, i386/amd64-avx-mpx-linux-expedite):
        New expedites.
        * i386-linux-tdep.c (features/i386/i386-avx-mpx-linux.c): New
        include.
        (i386_linux_core_read_description): Add case
        X86_XSTATE_AVX_MPX_MASK.
        (_initialize_i386_linux_tdep): Call
        initialize_tdesc_i386_avx_mpx_linux.
        * i386-linux-tdep.h (tdesc_i386_avx_mpx_linux): New include.
        * i386-tdep.c (features/i386/i386-avx-mpx.c): New include.
        (i386_target_description): Add case for X86_XSTATE_AVX_MPX_MASK.
        * x86-linux-nat.c (x86_linux_read_description): Add case for
        X86_XSTATE_AVX_MPX_MASK.
        * features/i386/amd64-avx-mpx-linux.xml: New file.
        * features/i386/i386-avx-mpx-linux.xml: New file.
        * features/i386/i386-avx-mpx.xml: New file.
        * features/i386/amd64-avx-mpx.xml: New file.
        * features/i386/amd64-avx-mpx-linux.c: Generated.
        * features/i386/amd64-avx-mpx.c: Generated.
        * features/i386/i386-avx-mpx-linux.c: Generated.
        * features/i386/i386-avx-mpx.c: Generated.
        * regformats/i386/amd64-avx-mpx-linux.dat: Generated.
        * regformats/i386/amd64-avx-mpx.dat: Generated.
        * regformats/i386/i386-avx-mpx-linux.dat: Generated.
        * regformats/i386/i386-avx-mpx.dat: Generated.

2016-04-18  Pedro Alves  <palves@redhat.com>

        * ptrace.m4 (GDB_AC_PTRACE): Don't run tests in C++ mode.
        * configure: Regenerate.

2016-04-18  Martin Galvan  <martin.galvan@tallertechnologies.com>

        * valops.c (value_addr): For C++ references, set the copied value's
        enclosing_type as well.

2016-04-18  Yao Qi  <yao.qi@linaro.org>

        Revert:
        2016-04-15  Yao Qi  <yao.qi@linaro.org>

        * arm-tdep.c (thumb_stack_frame_destroyed_p): Return zero if
        PC is far from the end of function.

2016-04-16  Pedro Alves  <palves@redhat.com>

        * ada-exp.y (yydefred): Define as ada_yydefred.

2016-04-15  Pedro Alves  <palves@redhat.com>

        * ada-lang.c (ada_lookup_struct_elt_type): Constify 'type_str' and
        'name_str' locals.

2016-04-15  Pedro Alves  <palves@redhat.com>

        * btrace.c (pt_btrace_insn_flags): Change return type to
        btrace_insn_flags.  Use btrace_insn_flags for local.

2016-04-15  Pedro Alves  <palves@redhat.com>

        * nat/linux-ptrace.h [__mips__] (GDB_ARCH_IS_TRAP_BRKPT): Also
        accept TRAP_BRKPT.
         [__mips__] (GDB_ARCH_IS_TRAP_HWBKPT): Also accept TRAP_HWBKPT.

2016-04-15  Yao Qi  <yao.qi@linaro.org>

        * arm-tdep.c (thumb_stack_frame_destroyed_p): Return zero if
        PC is far from the end of function.

2016-04-14  Pedro Alves  <palves@redhat.com>

        * cli/cli-cmds.c (alias_usage_error): New function.
        (alias_command): Use it.
        * ctf.c (ctf_save_metadata_header): Inline metadata_fmt local in
        ctf_save_write_metadata call.

2016-04-14  Pedro Alves  <palves@redhat.com>

        * ada-typeprint.c (print_fixed_point_type): Don't pass float as
        argument to function expecting LONGEST.
        * value.c (unpack_long): Add casts to LONGEST.

2016-04-13  Luis Machado  <lgustavo@codesourcery.com>

        * exec.c (exec_file_locate_attach): Guard a couple functions
        that can throw errors.
        (exception_print_same): New helper function.

2016-04-13  Pedro Alves  <palves@redhat.com>

        PR remote/19840
        * remote.c (struct remote_state) <last_resume_exec_dir>: New
        field.
        (new_remote_state): Default last_resume_exec_dir to EXEC_FORWARD.
        (remote_open_1): Reset last_resume_exec_dir to EXEC_FORWARD.
        (remote_resume): Store the last execution direction.
        (remote_execution_direction): New function.
        (init_remote_ops): Install it as to_execution_direction target_ops
        method.

2016-04-12  Pedro Alves  <palves@redhat.com>

        * common/common-exceptions.h (GDB_XCPT_TRY): Update comment.
        [__cplusplus] (GDB_XCPT): Define as GDB_XCPT_TRY.

2016-04-12  Pedro Alves  <palves@redhat.com>

        * common/common-exceptions.c (struct catcher) <buf>: Now a
        'jmp_buf' instead of SIGJMP_BUF.
        (exceptions_state_mc_init): Change return type to 'jmp_buf'.
        (throw_exception): Use longjmp instead of SIGLONGJMP.
        * common/common-exceptions.h: Include <setjmp.h> instead of
        "gdb_setjmp.h".
        (exceptions_state_mc_init): Change return type to 'jmp_buf'.
        [GDB_XCPT == GDB_XCPT_SJMP] (TRY): Use setjmp instead of
        SIGSETJMP.
        * cp-support.c: Include "gdb_setjmp.h".

2016-04-12  Pedro Alves  <palves@redhat.com>

        * common/common-exceptions.c (exception_rethrow): Remove
        prepare_to_throw_exception call.
        * common/common-exceptions.h (prepare_to_throw_exception): Delete
        declaration.
        * exceptions.c (prepare_to_throw_exception): Delete.

2016-04-12  Pedro Alves  <palves@redhat.com>

        * target.c (target_check_pending_interrupt): Delete.
        * target.h (struct target_ops) <to_check_pending_interrupt>:
        Remove method.
        (target_check_pending_interrupt): Remove declaration.
        * target-delegates.c: Regenerate.

2016-04-12  Pedro Alves  <palves@redhat.com>

        * defs.h: Update comments on SIGINT handling.
        (immediate_quit): Delete declaration.
        * event-loop.c (call_async_signal_handler): Delete.
        * event-loop.h (call_async_signal_handler): Delete declaration.
        (mark_async_signal_handler): Update comments.
        (gdb_call_async_signal_handler): Delete declaration.
        * event-top.c (handle_sigint): Call mark_async_signal_handler
        instead of gdb_call_async_signal_handler.
        * exceptions.c (prepare_to_throw_exception): Remove reference to
        immediate_quit.
        (exception_fprintf): Remove comments about immediate_quit.
        * mingw-hdep.c (sigint_event, sigint_handler): Delete.
        (gdb_select): Don't wait on sigint_event.
        (gdb_call_async_signal_handler): Delete.
        (_initialize_mingw_hdep): Delete.
        * posix-hdep.c (gdb_call_async_signal_handler): Delete.
        * utils.c (immediate_quit): Delete.

2016-04-12  Pedro Alves  <palves@redhat.com>

        * defs.h (quit_handler_ftype, quit_handler)
        (make_cleanup_override_quit_handler, default_quit_handler): New.
        (QUIT): Adjust comments.
        * event-top.c (default_quit_handler): New function.
        (quit_handler): New global.
        (struct quit_handler_cleanup_data): New.
        (restore_quit_handler, restore_quit_handler_dtor)
        (make_cleanup_override_quit_handler): New.
        (async_request_quit): Call QUIT.
        * remote.c (struct remote_state) <got_ctrlc_during_io>: New field.
        (async_sigint_remote_twice_token, async_sigint_remote_token):
        Delete.
        (remote_close): Update comments.
        (remote_start_remote): Don't set immediate_quit.  Set starting_up
        earlier.
        (remote_serial_quit_handler, remote_unpush_and_throw): New
        functions.
        (remote_open_1): Clear got_ctrlc_during_io.  Set
        remote_async_terminal_ours_p unconditionally.
        (async_initialize_sigint_signal_handler)
        (async_handle_remote_sigint, async_handle_remote_sigint_twice)
        (remote_check_pending_interrupt, async_remote_interrupt)
        (async_remote_interrupt_twice)
        (async_cleanup_sigint_signal_handler, ofunc)
        (sync_remote_interrupt, sync_remote_interrupt_twice): Delete.
        (remote_terminal_inferior, remote_terminal_ours): Remove async
        checks.
        (remote_wait_as): Don't install a SIGINT handler in sync mode.
        (readchar, remote_serial_write): Override the quit handler with
        remote_serial_quit_handler.
        (getpkt_or_notif_sane_1): Don't call QUIT.
        (initialize_remote_ops): Don't install
        remote_check_pending_interrupt.
        (_initialize_remote): Don't create async_sigint_remote_token and
        async_sigint_remote_twice_token.
        * ser-base.c (ser_base_wait_for): Call QUIT and use
        interruptible_select.
        (ser_base_write): Call QUIT.
        * ser-go32.c (dos_readchar, dos_write): Call QUIT.
        * ser-unix.c (wait_for): Don't use VTIME.  Always take the
        gdb_select path, but call QUIT and interruptible_select.
        * utils.c (maybe_quit): Call the current quit handler.  Don't call
        target_check_pending_interrupt.
        (defaulted_query, prompt_for_continue): Override the quit handler
        with the default quit handler.

2016-04-12  Pedro Alves  <palves@redhat.com>

        * tui/tui-hooks.c (tui_target_has_run): Delete.
        (tui_about_to_proceed): Delete.
        (tui_about_to_proceed_observer): Delete.
        (tui_install_hooks, tui_remove_hooks): Don't install/remove an
        about_to_proceed observer.

2016-04-12  Pedro Alves  <palves@redhat.com>

        * mi/mi-interp.c (mi_new_thread): Put
        target_terminal_ours_for_output in effect while outputting.
        (mi_thread_exit): Use target_terminal_ours_for_output instead of
        target_terminal_ours.
        (mi_record_changed, mi_inferior_added, mi_inferior_appeared)
        (mi_inferior_exit, mi_inferior_removed, mi_traceframe_changed)
        (mi_tsv_created, mi_tsv_deleted, mi_tsv_modified)
        (mi_breakpoint_created, mi_breakpoint_deleted)
        (mi_breakpoint_modified, mi_solib_loaded, mi_solib_unloaded)
        (mi_command_param_changed, mi_memory_changed)
        (report_initial_inferior): Use target_terminal_ours_for_output
        instead of target_terminal_ours.  Restore terminal settings.
        * mi/mi-main.c (mi_execute_command): Use
        target_terminal_ours_for_output instead of target_terminal_ours.
        Restore terminal settings.

2016-04-12  Pedro Alves  <palves@redhat.com>

        PR gdb/19828
        * gnu-nat.c (inf_validate_task_sc): Don't call
        target_terminal_ours / target_terminal_inferior around query.
        * i386-tdep.c (i386_record_lea_modrm, i386_process_record): Don't
        call target_terminal_ours / target_terminal_inferior around
        yquery.
        * linux-record.c (record_linux_system_call): Don't call
        target_terminal_ours / target_terminal_inferior around yquery.
        * nto-procfs.c (interrupt_query): Don't call target_terminal_ours
        / target_terminal_inferior around query.
        * record-full.c (record_full_check_insn_num): Remove
        'set_terminal' parameter.  Don't call target_terminal_ours /
        target_terminal_inferior around query.
        (record_full_message, record_full_registers_change)
        (record_full_xfer_partial): Adjust.
        * remote.c (interrupt_query): Don't call target_terminal_ours /
        target_terminal_inferior around query.
        * utils.c (defaulted_query): Install cleanup to restore target
        terminal.  Put target_terminal_ours_for_output in effect while
        defaulted producing, and target_terminal_ours in in effect while
        handling input.
        (prompt_for_continue): Install cleanup to restore target terminal.
        Put target_terminal_ours in in effect while handling input.

2016-04-12  Pedro Alves  <palves@redhat.com>

        * utils.c (defaulted_query, prompt_for_continue): Free temporary
        strings with cleanups, instead of xfree.

2016-04-12  Pedro Alves  <palves@redhat.com>

        * utils.c (vwarning, internal_vproblem): Use
        make_cleanup_restore_target_terminal and
        target_terminal_ours_for_output.

2016-04-12  Pedro Alves  <palves@redhat.com>

        * infcmd.c (post_create_inferior, prepare_one_step): Use
        target_terminal_ours_for_output instead of target_terminal_ours.

2016-04-12  Pedro Alves  <palves@redhat.com>

        * exceptions.c (print_flush): Use target_terminal_ours_for_output
        instead of target_terminal_ours, and restore target terminal with
        a cleanup.

2016-04-12  Pedro Alves  <palves@redhat.com>

        * cp-support.c (gdb_demangle): Use target_terminal_ours_for_output
        instead of target_terminal_ours, and restore target terminal with
        a cleanup.

2016-04-12  Pedro Alves  <palves@redhat.com>

        * ada-lang.c (type_as_string, type_as_string_and_cleanup): New
        functions.
        (ada_lookup_struct_elt_type): Use type_as_string_and_cleanup.

2016-04-12  Pedro Alves  <palves@redhat.com>

        * ser-base.c (fd_event): Retry read_prim on EINTR.
        (do_ser_base_readchar): Retry read_prim on EINTR.
        (ser_base_write): Retry write_prim on EINTR.
        * ser-unix.c (ser_unix_read_prim): Don't retry on EINTR here.
        (ser_unix_write_prim): Remove comment.

2016-04-12  Pedro Alves  <palves@redhat.com>

        * remote.c (remote_pass_ctrlc): New function.
        (init_remote_ops): Install it.
        * target.c (target_terminal_inferior): Pass pending Ctrl-C to the
        target.
        (target_pass_ctrlc, default_target_pass_ctrlc): New functions.
        * target.h (struct target_ops) <to_pass_ctrlc>: New method.
        (target_pass_ctrlc, default_target_pass_ctrlc): New declarations.
        * target-delegates.c: Regenerate.

2016-04-12  Pedro Alves  <palves@redhat.com>

        * infcmd.c (interrupt_target_1): Call target_stop is in non-stop
        mode.
        * linux-nat.c (linux_nat_interrupt): Delete.
        (linux_nat_add_target): Don't install linux_nat_interrupt.
        * remote.c (remote_interrupt_ns): Change return type to void.
        Throw error if interrupting the target is not supported.
        (remote_interrupt): Don't call the remote_stop_ns/remote_stop_as.

2016-04-12  Pedro Alves  <palves@redhat.com>

        * defs.h (clear_quit_flag): Remove declaration.
        * extension-priv.h (struct extension_language_ops)
        <clear_quit_flag>: Remove field and update comments.
        * extension.c (clear_quit_flag): Delete.
        * guile/guile.c (guile_extension_ops): Adjust.
        * python/python.c (python_extension_ops): Adjust.
        (gdbpy_clear_quit_flag): Delete.

2016-04-12  Pedro Alves  <palves@redhat.com>

        * main.c (captured_main): Don't clear the quit flag.

2016-04-12  Pedro Alves  <palves@redhat.com>

        * exceptions.c (prepare_to_throw_exception): Don't clear the quit
        flag.

2016-04-12  Pedro Alves  <palves@redhat.com>

        * event-top.c (command_handler): Don't call clear_quit_flag.

2016-04-12  Pedro Alves  <palves@redhat.com>

        * remote-sim.c (gdb_os_poll_quit): Don't call clear_quit_flag.
        * remote.c (remote_wait_as): Don't call clear_quit_flag.

2016-04-12  Pedro Alves  <palves@redhat.com>

        * python/python.c: Include "ser-event.h".
        (gdbpy_event_fds): Delete.
        (gdbpy_serial_event): New.
        (gdbpy_run_events): Change prototype.  Use serial_event_clear
        instead of serial_readchar.
        (gdbpy_post_event): Use serial_event_set instead of serial_write.
        (gdbpy_initialize_events): Use make_serial_event instead of
        serial_pipe.

2016-04-12  Pedro Alves  <palves@redhat.com>

        * defs.h: Extend QUIT-related comments to mention
        interruptible_select.
        (quit_serial_event_set, quit_serial_event_clear): Declare.
        * event-top.c: Include "ser-event.h" and "gdb_select.h".
        (quit_serial_event): New global.
        (async_init_signals): Make quit_serial_event.
        (quit_serial_event_set, quit_serial_event_clear)
        (quit_serial_event_fd, interruptible_select): New functions.
        * extension.c (set_quit_flag): Set the quit serial event.
        (check_quit_flag): Clear the quit serial event.
        * gdb_select.h (interruptible_select): New declaration.
        * guile/scm-ports.c (ioscm_input_waiting): Use
        interruptible_select instead of gdb_select.
        * top.c (gdb_readline_no_editing): Likewise.
        * ui-file.c (stdio_file_read): Likewise.

2016-04-12  Pedro Alves  <palves@redhat.com>

        * event-loop.c: Include "ser-event.h".
        (async_signal_handlers_serial_event): New global.
        (async_signals_handler, initialize_async_signal_handlers): New
        functions.
        (mark_async_signal_handler): Set
        async_signal_handlers_serial_event.
        (invoke_async_signal_handlers): Clear
        async_signal_handlers_serial_event.
        * event-top.c (async_init_signals): Call
        initialize_async_signal_handlers.

2016-04-12  Pedro Alves  <palves@redhat.com>

        * Makefile.in (SFILES): Add ser-event.c.
        (HFILES_NO_SRCDIR): Add ser-event.h.
        (COMMON_OBS): Add ser-event.o.
        * ser-event.c, ser-event.h: New files.
        * serial.c (new_serial): New function, factored out from
        (serial_fdopen_ops): ... this.
        (serial_open_ops_1): New function, factored out from
        (serial_open): ... this.
        (serial_open_ops): New function.
        * serial.h (struct serial): Forware declare.
        (serial_open_ops): New declaration.

2016-04-12  Pedro Alves  <palves@redhat.com>

        * serial.c (serial_open, serial_fdopen_ops, do_serial_close):
        Remove references to name.
        * serial.h (struct serial) <name>: Delete.

2016-04-12  Pedro Alves  <palves@redhat.com>

        * remote-fileio.c (sigint_fileio_token, remote_fio_no_longjmp):
        Delete.
        (async_remote_fileio_interrupt): Delete.
        (remote_fileio_ctrl_c_signal_handler): Don't call the async signal
        handler.  Instead just always set the ctrl_c flag.
        (remote_fileio_reply): Clear remote_fio_ctrl_c_flag before
        re-enabling the SIGINT handler.
        (remote_fileio_func_open, remote_fileio_func_close)
        (remote_fileio_func_read, remote_fileio_func_write)
        (remote_fileio_func_lseek, remote_fileio_func_rename)
        (remote_fileio_func_unlink, remote_fileio_func_stat)
        (remote_fileio_func_fstat, remote_fileio_func_gettimeofday)
        (remote_fileio_func_isatty, remote_fileio_func_system)
        (remote_fileio_request): Remove references to
        remote_fio_no_longjmp.
        (initialize_remote_fileio): Don't create an async signal handler.

2016-04-12  Pedro Alves  <palves@redhat.com>

        * event-top.c (stdin_event_handler): Call QUIT;
        (prompt_for_continue): Don't run with immediate_quit set.

2016-04-12  Pedro Alves  <palves@redhat.com>

        * tui/tui-io.c (tui_redisplay_readline): Check
        gdb_in_secondary_prompt_p instead of immediate_quit.
        * tui/tui.c: Include top.h.
        (tui_rl_startup_hook): Check gdb_in_secondary_prompt_p instead of
        immediate_quit.

2016-04-12  Pedro Alves  <palves@redhat.com>

        * top.c (read_command_file): Inline command_loop here.
        (command_loop): Delete.

2016-04-12  Pedro Alves  <palves@redhat.com>

        * top.c: Include "gdb_select.h".
        (gdb_readline_no_editing): Wait for input with gdb_select instead
        of blocking in fgetc.
        (command_line_input): Don't set immediate_quit.

2016-04-08  Martin Galvan  <martin.galvan@tallertechnologies.com>

        * value.c (value_next): Make pass-by-reference parameters const-correct.
        (value_parent): Likewise.
        (value_enclosing_type): Likewise.
        (value_lazy): Likewise.
        (value_stack): Likewise.
        (value_embedded_offset): Likewise.
        (value_pointed_to_offset): Likewise.
        (value_raw_address): Likewise.
        (deprecated_value_modifiable): Likewise.
        (value_free_to_mark): Likewise.
        (value_release_to_mark): Likewise.
        (internalvar_name): Likewise.
        (readjust_indirect_value_type): Likewise.
        (value_initialized): Likewise.
        * value.h (value_next): Likewise.
        (value_parent): Likewise.
        (value_enclosing_type): Likewise.
        (value_lazy): Likewise.
        (value_stack): Likewise.
        (value_embedded_offset): Likewise.
        (value_pointed_to_offset): Likewise.
        (value_raw_address): Likewise.
        (deprecated_value_modifiable): Likewise.
        (value_free_to_mark): Likewise.
        (value_release_to_mark): Likewise.
        (internalvar_name): Likewise.
        (readjust_indirect_value_type): Likewise.
        (value_initialized): Likewise.

2016-04-07  Yao Qi  <yao.qi@linaro.org>

        * record-full.c (record_full_insert_breakpoint): Return
        early if entry on the address is found in
        record_full_breakpoints.

2016-04-07  Yao Qi  <yao.qi@linaro.org>

        * record-full.c (record_full_insert_breakpoint): Set
        bp_tgt->reqstd_address and bp_tgt->placed_size.

2016-04-06  Don Breazeal  <donb@codesourcery.com>

        * value.c (value_actual_type): Don't try to get rtti type
        of the value if it has been optimized out.
        (value_optimized_out): If a memory access error occurs,
        just check vaue->optimized_out.

2016-04-06  Jan Kratochvil  <jan.kratochvil@redhat.com>

        Revert the previous commit adding unknown_v_replies_ok.

2016-04-06  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * remote.c (struct remote_state): New field unknown_v_replies_ok.
        (packet_config_support): Read it.
        (remote_start_remote): Set it.

2016-04-06  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * remote.c: Revert check-in by a mistake in the previous commit.

2016-04-06  Jan Kratochvil  <jan.kratochvil@redhat.com>
            Pedro Alves  <palves@redhat.com>

        * exec.c (exec_file_locate_attach): Print warning for unsupported
        target_pid_to_exec_file.
        * symfile-mem.c (add_vsyscall_page): Remove the "file" command
        message part.

2016-04-04  Simon Marchi  <simon.marchi@ericsson.com>

        * cli/cli-decode.c (help_cmd_list): Fix function doc and remove
        trailing spaces.

2016-04-01  Artemiy Volkov  <artemiyv@acm.org>

        PR gdb/19820
        * eval.c (evaluate_subexp_standard): Allow TYPE_CODE_ENUM to be
        the type of BINOP_REPEAT's second operand.

2016-03-31  Yichao Yu  <yyc1992@gmail.com>

        PR gdb/19858
        * jit.c (jit_breakpoint_re_set_internal): Return 0 if we already
        got the breakpoint at the right address.
        (jit_inferior_created): New function.
        (_initialize_jit): Install jit_inferior_created as
        inferior_created observer.

2016-03-31  Marcin Kościelnicki  <koriakin@0x04.net>

        * NEWS: Mention support for tracepoints on powerpc*-linux.

2016-03-31  Catalin Udma  <catalin.udma@freescale.com>

        PR python/19743
        * python/python.c (execute_gdb_command): Use console uiout
        when executing gdb command.
        * utils.c (restore_ui_out_closure): New structure.
        (do_restore_ui_out): New function.
        (make_cleanup_restore_ui_out): Likewise.
        * utils.h (make_cleanup_restore_ui_out): Declare.

2016-03-31  Pedro Alves  <palves@redhat.com>

        * NEWS: Mention that support for "target m32rsdi", "target mips",
        "target pmon", "target ddb", "target rockhopper", and "target lsi"
        was removed.
        * Makefile.in (ALL_TARGET_OBS): Remove remote-m32r-sdi.o and
        remote-mips.o.
        (ALLDEPFILES): Remove remote-m32r-sdi.c and remote-mips.c.
        * configure.tgt: Remove all references to remote-m32r-sdi.o and
        remote-mips.o.
        * mips-tdep.c (deprecated_mips_set_processor_regs_hack): Delete
        function.
        * mips-tdep.h (deprecated_mips_set_processor_regs_hack): Delete
        declaration.
        * remote-m32r-sdi.c, remote-mips.c: Delete files.
        * symfile.c (generic_load, generic_load): Remove comments.

2016-03-30  Yao Qi  <yao.qi@linaro.org>

        * arm-tdep.c (arm_epilogue_frame_this_id): Check 'func' against
        0 rather than NULL.

2016-03-30  Yao Qi  <yao.qi@linaro.org>

        * arm-tdep.c: (arm_make_epilogue_frame_cache): New function.
        (arm_epilogue_frame_this_id): New function.
        (arm_epilogue_frame_prev_register): New function.
        (arm_epilogue_frame_sniffer): New function.
        (arm_epilogue_frame_unwind): New.
        (arm_gdbarch_init): Append unwinder arm_epilogue_frame_unwind.

2016-03-30  Yao Qi  <yao.qi@linaro.org>

        * arm-tdep.c (arm_stack_frame_destroyed_p): Rename it ...
        (arm_stack_frame_destroyed_p_1): ... here.  Don't call
        arm_pc_is_thumb.
        (arm_stack_frame_destroyed_p): Call
        thumb_stack_frame_destroyed_p and
        arm_stack_frame_destroyed_p_1.

2016-03-30  Doug Evans  <dje@google.com>

        * python/py-utils.c (host_string_to_python_string): New function.
        * python/python-internal.h (host_string_to_python_string): Declare it.
        * python/py-*.c (*): Update all calls to
        PyString_Decode (str, strlen (str), host_charset (), NULL);
        to use host_string_to_python_string instead.

2016-03-30  Marcin Kościelnicki  <koriakin@0x04.net>

        * remote.c (remote_check_symbols): Allocate own buffer for reply.

2016-03-29  Max Filippov  <jcmvbkbc@gmail.com>

        * xtensa-tdep.c (xtensa_frame_cache): Change op1 type to LONGEST.
        Use safe_read_memory_integer instead of read_memory_integer.

2016-03-29  Marcin Kościelnicki  <koriakin@0x04.net>

        * NEWS: Mention support for tracepoints on s390*-linux.

2016-03-29  Don Breazeal  <donb@codesourcery.com>

        * gdb/value.c (value_actual_type): Fix formatting issue.

2016-03-23  Yao Qi  <yao.qi@linaro.org>

        * gdbarch.sh (software_single_step): Remove comments.
        * gdbarch.h: Regenerated.

2016-03-21  Yao Qi  <yao.qi@linaro.org>

        * arm-tdep.c (arm_record_media): New.
        (arm_record_ld_st_reg_offset): Call arm_record_media.

2016-03-21  Yao Qi  <yao.qi@linaro.org>

        * arm-linux-tdep.c (arm_canonicalize_syscall): Canonicalize
        more syscalls.

2016-03-18  Yao Qi  <yao.qi@linaro.org>

        * sparc-tdep.c (sparc_software_single_step): Make it static.
        * sparc-tdep.h (sparc_software_single_step): Remove declaration.

2016-03-18  Yao Qi  <yao.qi@linaro.org>

        * spu-tdep.c (spu_software_single_step): Throw error when
        target_read_memory fails.

2016-03-17  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * linux-thread-db.c (check_pid_namespace_match): Extend the message.

2016-03-17  Pedro Alves  <palves@redhat.com>
            Don Breazeal  <donb@codesourcery.com>

        PR remote/19496
        * infcmd.c (notice_new_inferior): Use the 'leave_running' argument
        instead of checking the 'non_stop' global.
        * remote.c (remote_add_thread): New parameter 'executing'.  Use it
        to set the new thread's executing state.
        (remote_notice_new_inferior): Rename parameter 'running' to
        'executing'.  Always set the thread state to THREAD_RUNNING in
        non-stop mode, and to THREAD_STOPPED in all-stop mode.  Pass
        EXECUTING to remote_add_thread and notice_new_inferior.
        (remote_update_thread_list): Update to pass executing state, not
        running state.

2016-03-17  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * syscalls/s390-linux.xml: Add NUMA syscalls and new syscalls up
        to 374.
        * syscalls/s390x-linux.xml: Likewise.

2016-03-17  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * linux-record.c (record_mem_at_reg): New helper function.
        (record_linux_system_call): Exploit new helper function where
        applicable.

2016-03-17  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * linux-record.c: Fix whitespace issues; tabify, remove trailing
        spaces.

2016-03-17  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * linux-record.c (record_linux_system_call): Add missing return
        statements to handling of pipe and pipe2 syscalls.

2016-03-16  Doug Evans  <dje@google.com>

        * xml-tdesc.c (tdesc_start_enum): Fix c++ build.

2016-03-16  Yao Qi  <yao.qi@linaro.org>

        * arm-linux-tdep.c (arm_linux_init_abi): Fix
        arm_linux_record_tdep.arg1, arm_linux_record_tdep.arg2 and
        arm_linux_record_tdep.arg3.  Set arm_linux_record_tdep.arg4,
        arm_linux_record_tdep.arg5, arm_linux_record_tdep.arg6, and
        arm_linux_record_tdep.arg7.

2016-03-15  Keith Seitz  <keiths@redhat.com>

        PR breakpoints/18303
        * cp-namespace.c (cp_lookup_bare_symbol): Change assertion to
        look for "::" instead of simply ":".
        (cp_search_static_and_baseclasses): Return null_block_symbol for
        malformed input.
        Remove assertions.
        * cp-support.c (cp_find_first_component_aux): Do not return
        a prefix length for ':' unless the next character is also ':'.

2016-03-15  Doug Evans  <dje@google.com>

        * features/aarch64-core.xml (cpsr_flags): New flags type.
        (cpsr): Use it.
        * features/aarch64.c: Regenerate.

2016-03-15  Doug Evans  <dje@google.com>

        * features/i386/32bit-core.xml (i386_eflags): Remove "end" spec.
        * features/i386/32bit-sse.xml (i386_eflags): Ditto.
        * features/i386/64bit-core.xml (i386_eflags): Ditto.
        * features/i386/64bit-sse.xml (i386_eflags): Ditto.
        * features/i386/x32-core.xml (i386_eflags): Ditto.

2016-03-15  Doug Evans  <dje@google.com>
            Wei-cheng Wang  <cole945@gmail.com>

        Extend flags to support multibit and enum bitfields.
        * NEWS: Document new features.
        * c-typeprint.c (c_type_print_varspec_prefix): Handle TYPE_CODE_FLAGS.
        (c_type_print_varspec_suffix, c_type_print_base): Ditto.
        * gdbtypes.c (arch_flags_type): Don't assume all fields are one bit.
        (append_flags_type_field): New function.
        (append_flags_type_flag): Call it.
        * gdbtypes.h (append_flags_type_field): Declare.
        * target-descriptions.c (struct tdesc_type_flag): Delete.
        (enum tdesc_type_kind) <TDESC_TYPE_BOOL>: New enum value.
        (enum tdesc_type_kind) <TDESC_TYPE_ENUM>: Ditto.
        (struct tdesc_type) <u.f>: Delete.
        (tdesc_predefined_types): Add "bool".
        (tdesc_predefined_type): New function.
        (tdesc_gdb_type): Handle TDESC_TYPE_BOOL, TDESC_TYPE_ENUM.
        Update TDESC_TYPE_FLAGS support.
        (tdesc_free_type): Handle TDESC_TYPE_ENUM.  Update TDESC_TYPE_FLAGS.
        (tdesc_create_flags): Update.
        (tdesc_create_enum): New function.
        (tdesc_add_field): Initialize start,end to -1.
        (tdesc_add_typed_bitfield): New function.
        (tdesc_add_bitfield): Call it.
        (tdesc_add_flag): Allow TDESC_TYPE_STRUCT.  Update.
        (tdesc_add_enum_value): New function.
        (maint_print_c_tdesc_cmd): Fold TDESC_TYPE_FLAGS support into
        TDESC_TYPE_STRUCT.  Handle TDESC_TYPE_ENUM.
        * target-descriptions.h (tdesc_create_enum): Declare.
        (tdesc_add_typed_bitfield, tdesc_add_enum_value): Declare.
        * valprint.c (generic_val_print_enum_1): New function.
        (generic_val_print_enum): Call it.
        (val_print_type_code_flags): Make static.  Handle multibit bitfields
        and enum bitfields.
        * valprint.h (val_print_type_code_flags): Delete.
        * xml-tdesc.c (struct tdesc_parsing_data) <current_type_is_flags>:
        Delete.  All uses removed.
        (tdesc_start_enum): New function.
        (tdesc_start_field): Handle multibit and enum bitfields.
        (tdesc_start_enum_value): New function.
        (enum_value_attributes, enum_children, enum_attributes): New static
        globals.
        (feature_children): Add "enum".
        * features/gdb-target.dtd (enum, evalue): New elements.

2016-03-15  Doug Evans  <dje@google.com>

        * target-descriptions.c (struct tdesc_type) <u.u.size>: Change type
        from LONGEST to int.
        (struct tdesc_type) <u.f.size>: Ditto.
        (tdesc_set_struct_size): Change type of "size" arg from LONGEST
        to int.  Add assertion size > 0.
        (tdesc_create_flags): Ditto.
        * target-descriptions.h (tdesc_set_struct_size): Update.
        (tdesc_create_flags): Update.
        * xml-tdesc.c (MAX_FIELD_SIZE, MAX_FIELD_BITSIZE): New macros.
        (MAX_VECTOR_SIZE): New macro.
        (tdesc_start_struct): Catch conversion errors from LONGEST to int.
        (tdesc_start_flags, tdesc_start_field, tdesc_start_vector): Ditto.

2016-03-15  Doug Evans  <dje@google.com>

        * target-descriptions.c (maint_print_c_tdesc_cmd): Use "type" for
        TYPE_CODE_FLAGS instead of "field_type", for consistency.
        * features/i386/amd64-avx-linux.c: Regenerate.
        * features/i386/amd64-avx.c: Regenerate.
        * features/i386/amd64-avx512-linux.c: Regenerate.
        * features/i386/amd64-avx512.c: Regenerate.
        * features/i386/amd64-linux.c: Regenerate.
        * features/i386/amd64-mpx-linux.c: Regenerate.
        * features/i386/amd64-mpx.c: Regenerate.
        * features/i386/amd64.c: Regenerate.
        * features/i386/i386-avx-linux.c: Regenerate.
        * features/i386/i386-avx.c: Regenerate.
        * features/i386/i386-avx512-linux.c: Regenerate.
        * features/i386/i386-avx512.c: Regenerate.
        * features/i386/i386-linux.c: Regenerate.
        * features/i386/i386-mmx-linux.c: Regenerate.
        * features/i386/i386-mmx.c: Regenerate.
        * features/i386/i386-mpx-linux.c: Regenerate.
        * features/i386/i386-mpx.c: Regenerate.
        * features/i386/i386.c: Regenerate.
        * features/i386/x32-avx-linux.c: Regenerate.
        * features/i386/x32-avx.c: Regenerate.
        * features/i386/x32-avx512-linux.c: Regenerate.
        * features/i386/x32-avx512.c: Regenerate.
        * features/i386/x32-linux.c: Regenerate.
        * features/i386/x32.c: Regenerate.

2016-03-15  Pedro Alves  <palves@redhat.com>

        PR gdb/19676
        * linux-thread-db.c (try_thread_db_load_1): Leave
        info->td_ta_thr_iter_p NULL iff debugging a live process and we
        have /proc access.
        (find_new_threads_once): Assert that we have a non-NULL
        info->td_ta_thr_iter_p instead of checking whether the target has
        execution.

2016-03-15  Pedro Alves  <palves@redhat.com>

        PR gdb/19676
        * infrun.c (displaced_step_prepare): Also disable displaced
        stepping on NOT_SUPPORTED_ERROR.
        * linux-tdep.c (linux_displaced_step_location): If reading auxv
        fails, throw NOT_SUPPORTED_ERROR instead of generic error.

2016-03-13  Marcin Kościelnicki  <koriakin@0x04.net>

        * s390-linux-tdep.c (s390_gen_return_address): New function.
        (s390_gdbarch_init): Fill gen_return_address hook.

2016-03-11  Andrew Burgess  <andrew.burgess@embecosm.com>

        * symmisc.c (maintenance_info_line_tables): New function.
        (maintenance_print_one_line_table): New function.
        (_initialize_symmisc): Register 'maint info line-table' command.
        * NEWS: Mention new command.

2016-03-11  Marcin Kościelnicki  <koriakin@0x04.net>

        * s390-linux-tdep.c (s390_ax_pseudo_register_collect): New function.
        (s390_ax_pseudo_register_push_stack): New function.
        (s390_gdbarch_init): Fill ax_pseudo_register_collect and
        ax_pseudo_register_push_stack hooks.

2016-03-10  Simon Marchi  <simon.marchi@polymtl.ca>

        * data-directory/Makefile.in (PYTHON_FILE_LIST): Install
        gdb/function/as_string.py.
        * python/lib/gdb/function/as_string.py: New file.
        * NEWS: Mention the new $_as_string function.

2016-03-09  Jose E. Marchesi  <jose.marchesi@oracle.com>

        * target.h: Fix doc string of target_can_use_hardware_watchpoint.

2016-03-09  Pedro Alves  <palves@redhat.com>

        * event-top.c (more_to_come): Delete.
        (struct readline_input_state): Delete.
        (readline_input_state): Delete.
        (get_command_line_buffer): New function.
        (command_handler): Update comments.  Don't handle NULL commands
        here.  Do not execute commented lines.
        (command_line_append_input_line): New function.
        (handle_line_of_input): New function, partly based on
        command_line_handler and command_line_input.
        (command_line_handler): Rewrite.
        * event-top.h (command_handler): New declaration.
        (command_loop): Defer command execution to command_handler.
        (command_line_input): Update comments.  Simplify, using struct
        buffer and handle_line_of_input.
        * top.h (struct buffer): New forward declaration.
        (handle_line_of_input): New declaration.

2016-03-09  Pedro Alves  <palves@redhat.com>

        * event-top.c (command_line_handler): Use xfree + xstrdup instead
        of xrealloc + strcpy.
        * main.c (captured_main): Use xstrdup instead of xmalloc plus
        manual clear.
        * top.c (saved_command_line): Rewrite comment.
        (saved_command_line_size): Delete.
        (command_line_input): Use xfree + xstrdup instead of xrealloc +
        strcpy.
        * top.h (saved_command_line_size): Delete declaration.

2016-03-09  Pedro Alves  <palves@redhat.com>

        * event-top.c: Include buffer.h.
        (gdb_readline_no_editing_callback): Use struct buffer instead
        of xrealloc.

2016-03-09  Pedro Alves  <palves@redhat.com>

        * common/buffer.h (buffer_grow_char): New function.
        * top.c: Include buffer.h.
        (gdb_readline_no_editing): Rename 'prompt_arg' parameter to
        'prompt'.  Use struct buffer instead of xrealloc.

2016-03-09  Pedro Alves  <palves@redhat.com>

        * defs.h (gdb_readline): Delete declaration.
        * top.c (gdb_readline): Rename to ...
        (gdb_readline_no_editing): ... this, and make static.

2016-03-09  Pedro Alves  <palves@redhat.com>

        * utils.c (prompt_for_continue): Update comments.

2016-03-09  Pedro Alves  <palves@redhat.com>

        * event-top.c (async_annotation_suffix): Delete.
        (top_level_prompt, command_line_handler): Don't use
        'async_annotation_suffix' and simplify.
        * event-top.h (async_annotation_suffix): Delete declaration.
        (init_main): Remove reference to 'async_annotation_suffix'.

2016-03-09  Pedro Alves  <palves@redhat.com>

        * event-top.c (gdb_readline2): Rename to ...
        (gdb_readline_no_editing_callback): ... this.
        (change_line_handler, stdin_event_handler)
        (gdb_setup_readline): Adjust.
        * event-top.h (gdb_readline2): Rename to ...
        (gdb_readline_no_editing_callback): ... this, and move closer to
        other readline-related declarations.
        * mi/mi-interp.c (mi_interpreter_resume): Adjust.

2016-03-09  Pedro Alves  <palves@redhat.com>

        * top.c (window_hook): Delete.
        (command_loop): Remove references to window_hook.

2016-03-09  Marcin Kościelnicki  <koriakin@0x04.net>

        * corefile.c (safe_read_memory_unsigned_integer): New function.
        * gdbcore.h (safe_read_memory_unsigned_integer): New prototype.
        * rs6000-tdep.c (rs6000_frame_cache): Read backchain as unsigned.

2016-03-09  Marcin Kościelnicki  <koriakin@0x04.net>

        * rs6000-tdep.c: Add "ax.h" and "ax-gdb.h" includes.
        (rs6000_gen_return_address): New function.
        (rs6000_gdbarch_init): Wire in the above.

2016-03-09  Marcin Kościelnicki  <koriakin@0x04.net>

        * rs6000-tdep.c (rs6000_ax_pseudo_register_collect): New function.
        (rs6000_gdbarch_init): Wire in the above.

2016-03-09  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * s390-linux-tdep.c (s390_analyze_prologue): Ignore BRC and BRCL
        instructions that do nothing or are conditional traps.

2016-03-09  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * s390-linux-tdep.c (s390_prologue_frame_unwind_cache): Store
        frame func's PC in info->func before any other failure can occur.
        (s390_frame_this_id): Use frame_id_build_unavailable_stack if
        info->func has been filled out.

2016-03-09  Pedro Alves  <palves@redhat.com>

        * osabi.c (gdb_osabi_names): Avoid spaces in osabi names.

2016-03-09  Pedro Alves  <palves@redhat.com>

        * frv-tdep.c (frv_gdbarch_init): Handle bfd_mach_fr300.

2016-03-09  Pedro Alves  <palves@redhat.com>

        * cris-tdep.c (cris_gdbarch_init): Return 0 if the info's byte
        order is BFD_ENDIAN_BIG or if the cris version is unsupported.

2016-03-09  Pedro Alves  <palves@redhat.com>

        * doublest.c: Extend comments.
        (floatformat_to_doublest, floatformat_from_doublest): Copy the
        floatformat's total size, not the host type's size.

2016-03-09  Pedro Alves  <palves@redhat.com>

        * doublest.c (floatformat_totalsize_bytes): New function.
        (floatformat_from_type): Assert that the type's length is at least
        as long as the floatformat's totalsize.
        * doublest.h (floatformat_totalsize_bytes): New declaration.
        * gdbtypes.c (arch_float_type): Assert that the type's length is
        at least as long as the floatformat's totalsize.

2016-03-09  Pedro Alves  <palves@redhat.com>

        * hppa-linux-tdep.c (hppa_linux_init_abi): Set the long double
        format to floatformats_ieee_double.

2016-03-07  Pedro Alves  <palves@redhat.com>

        * mips-tdep.c (mips_gdbarch_init): Check whether info.abfd is NULL
        before calling bfd_get_flavour.

2016-03-05  Pitchumani Sivanupandi  <pitchumani.s@atmel.com>

        * avr-tdep.c (AVR_LAST_ARG_REGNUM): Define.
        (avr_push_dummy_call): Correct last needed argument register.
        Write MSB of argument into register and subsequent bytes into
        other registers in decreasing order.

2016-03-04  Yao Qi  <yao.qi@linaro.org>

        * arm-tdep.c (arm_record_vdata_transfer_insn): Simplify the
        condition check.  Record the right D register number.

2016-03-04  Yao Qi  <yao.qi@linaro.org>

        * arm-tdep.c (arm_record_extension_space): Remove code
        printing "Process record does not support".
        (arm_record_data_proc_misc_ld_str): Likewise.
        (decode_insn): Call arm_record_extension_space if condition
        is 0xf.  Call arm_record_unsupported_insn if ret isn't
        ARM_RECORD_SUCCESS.  Use 'ret' instead of 'insn_id' to hold
        the value of thumb2_record_decode_insn_handler.

2016-03-04  Simon Marchi  <simon.marchi@ericsson.com>

        * features/feature_to_c.sh: Print the help when passing no
        argument.

2016-03-02  Bernhard Heckel  <bernhard.heckel@intel.com>

        * MAINTAINERS (Write After Approval): Add Bernhard Heckel.

2016-03-02  Bernhard Heckel  <bernhard.heckel@intel.com>

        * dwarf2read.c (new_symbol_full): Fix detection of gfortran compilers.

2016-03-01  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * s390-linux-tdep.c (s390_backchain_frame_unwind_cache): Avoid
        exception when attempting to access the inferior's backchain.

2016-02-29  Yao Qi  <yao.qi@linaro.org>

        * aarch64-linux-tdep.c (aarch64_canonicalize_syscall): Support
        eventfd2, eventfd2, dup3, inotify_init1, fallocate and pipe2.
        Return gdb_sys_epoll_create1 instead of gdb_sys_epoll_create
        for aarch64_sys_epoll_create1.

2016-02-29  Yao Qi  <yao.qi@linaro.org>

        * linux-record.h (enum gdb_syscall) <gdb_sys_fallocate>: New.
        <gdb_sys_eventfd2, gdb_sys_epoll_create1, gdb_sys_dup3>: New.
        <gdb_sys_pipe2, gdb_sys_inotify_init1>: New.
        * linux-record.c (record_linux_system_call): Handle them.

2016-02-28  Iain Buclaw  <ibuclaw@gdcproject.org>

        * d-namespace.c (d_lookup_symbol_imports): Avoid recursive lookups from
        cyclic imports.

2016-02-26  Keith Seitz  <keiths@redhat.com>

        * rs6000-tdep.c (rs6000_frame_cache): Explicitly cast return result
        to avoid invalid conversion from void *.

2016-02-26  Yao Qi  <yao.qi@linaro.org>

        * arm-tdep.c (arm_record_exreg_ld_st_insn): Set 'single_reg'
        per bit 8.  Check bit 20 instead of bit 4 for VMOV
        instruction.  Record D registers for instructions changing
        S registers.  Change of the order of length and address
        in record_buf_mem array.

2016-02-26  Yao Qi  <yao.qi@linaro.org>

        * arm-tdep.c (thumb_record_ld_st_reg_offset): Fix the register
        number of Rd.

2016-02-25  Doug Evans  <dje@google.com>

        * remote-m32r-sdi.c (recv_char_data): Initialize val to avoid
        compiler warning.
        (recv_long_data): Ditto.

2016-02-25  Simon Marchi  <simon.marchi@ericsson.com>

        * i386-linux-tdep.c (i386_linux_handle_segmentation_fault):
        Initialize variables.

2016-02-25  Antoine Tremblay  <antoine.tremblay@ericsson.com>

        * ax-general.c (ax_reg): Call gdbarch_remote_register_number.
        (ax_reg_mask): Likewise.

2016-02-24  Pedro Alves  <palves@redhat.com>

        * linux-nat.c (save_sigtrap) Delete.
        (stop_wait_callback): Call save_stop_reason instead of
        save_sigtrap.
        (check_stopped_by_breakpoint): Rename to ...
        (save_stop_reason): ... this.  Bits of save_sigtrap folded here.
        Use GDB_ARCH_IS_TRAP_HWBKPT and handle ambiguous
        GDB_ARCH_IS_TRAP_BRKPT / GDB_ARCH_IS_TRAP_HWBKPT.  Factor out
        common code between the USE_SIGTRAP_SIGINFO and
        !USE_SIGTRAP_SIGINFO blocks.
        (linux_nat_filter_event): Call save_stop_reason instead of
        save_sigtrap.
        * nat/linux-ptrace.h: Check for both SI_KERNEL and TRAP_BRKPT
        si_code for MIPS.
        * nat/linux-ptrace.h: Fix "TRAP_HWBPT" typo in x86 table.  Add
        comments on MIPS behavior.
        (GDB_ARCH_IS_TRAP_HWBKPT): Define for all archs.

2016-02-24  Marcin Kościelnicki  <koriakin@0x04.net>

        * rs6000-tdep.c (rs6000_frame_cache): Initialize frame and pc to 0
        to avoid spurious warnings.

2016-02-24  Gary Benson  <gbenson@redhat.com>

        * exec.c (exec_file_locate_attach): Do not attempt to
        locate main executable locally if not found in sysroot.

2016-02-24  Joel Brobecker  <brobecker@adacore.com>

        GDB 7.11 released.

2016-02-24  Wei-cheng Wang  <cole945@gmail.com>

        * rs6000-tdep.c (rs6000_frame_cache, rs6000_frame_this_id): Handle
        unavailable PC/SP to build unavailable frame.

2016-02-23  Doug Evans  <dje@google.com>

        Extend "skip" command to support -file, -gfile, -function, -rfunction.
        * NEWS: Document new features.
        * skip.c: #include "fnmatch.h", "gdb_regex.h".
        (skiplist_entry) <file>: Renamed from filename.
        <function>: Renamed from function_name.
        <file_is_glob, function_is_regexp>: New members.
        <compiled_function_regexp, compiled_function_regexp_is_valid>:
        New members.
        (make_skip_entry): New function.
        (free_skiplist_entry, free_skiplist_entry_cleanup): New functions.
        (make_free_skiplist_entry_cleanup): New function.
        (skip_file_command): Update.
        (skip_function, skip_function_command): Update.
        (compile_skip_regexp): New functions.
        (skip_command): Add support for new options.
        (skip_info): Update.
        (skip_file_p, skip_gfile_p): New functions.
        (skip_function_p, skip_rfunction_p): New functions.
        (function_name_is_marked_for_skip): Update and simplify.
        (_initialize_step_skip): Update.
        * symtab.c: #include "fnmatch.h".
        (compare_glob_filenames_for_search): New function.
        * symtab.h (compare_glob_filenames_for_search): Declare.
        * utils.c (count_path_elements): New function.
        (strip_leading_path_elements): New function.
        * utils.h (count_path_elements): Declare.
        (strip_leading_path_elements): Declare.

2016-02-23  Simon Marchi  <simon.marchi@ericsson.com>

        * arm-tdep.c (arm_decode_svc_copro): Remove "to" parameter.
        (thumb_process_displaced_insn): Likewise.
        (arm_process_displaced_insn): Adjust calls.

2016-02-23  Yao Qi  <yao.qi@linaro.org>

        * aarch64-linux-tdep.c (enum aarch64_syscall) <aarch64_sys_mknod>:
        Remove.
        <aarch64_sys_mkdir, aarch64_sys_unlink, aarch64_sys_symlink>: Remove.
        <aarch64_sys_link, aarch64_sys_rename, aarch64_sys_faccess>: Remove.
        <aarch64_sys_mknodat, aarch64_sys_mkdirat>: New.
        <aarch64_sys_unlinkat, aarch64_sys_symlinkat>: New.
        <aarch64_sys_linkat, aarch64_sys_renameat>: New.
        <aarch64_sys_faccessat>: New.
        <aarch64_sys_open, aarch64_sys_readlink, aarch64_sys_fstatat>: Remove.
        <aarch64_sys_openat, aarch64_sys_readlinkat>: New.
        <aarch64_sys_newfstatat>: New.
        (UNSUPPORTED_SYSCALL_MAP): New macro.
        (aarch64_canonicalize_syscall): Add missing syscalls.

2016-02-22  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * gdb-gdb.py (class TypeFlagsPrinter): Use parentheses for print.

2016-02-22  Yao Qi  <yao.qi@linaro.org>

        * arm-tdep.c: Fix code format issues.

2016-02-21  Iain Buclaw  <ibuclaw@gdcproject.org>

        * d-namespace.c (d_lookup_symbol_imports): Remove argument
        'search_parents'.  All callers updated.

2016-02-18  Marcin Kościelnicki  <koriakin@0x04.net>

        * s390-linux-tdep.c (s390_guess_tracepoint_registers): New function.
        (s390_gdbarch_init): Fill guess_tracepoint_registers hook.

2016-02-18  Walfred Tedeschi  <walfred.tedeschi@intel.com>

        * NEWS: Add entry for bound violation.
        * amd64-linux-tdep.c (amd64_linux_init_abi_common):
        Add handler for segmentation fault.
        * gdbarch.sh (handle_segmentation_fault): New.
        * gdbarch.c: Regenerate.
        * gdbarch.h: Regenerate.
        * i386-linux-tdep.c (i386_linux_handle_segmentation_fault): New.
        (SIG_CODE_BONDARY_FAULT): New define.
        (i386_linux_init_abi): Use i386_mpx_bound_violation_handler.
        * i386-linux-tdep.h (i386_linux_handle_segmentation_fault) New.
        * i386-tdep.c (i386_mpx_enabled): Add as external.
        * i386-tdep.c (i386_mpx_enabled): Add as external.
        * infrun.c (handle_segmentation_fault): New function.
        (print_signal_received_reason): Use handle_segmentation_fault.

2016-02-18  Marcin Kościelnicki  <koriakin@0x04.net>

        * arch-utils.c (default_guess_tracepoint_registers): New function.
        * arch-utils.h (default_guess_tracepoint_registers): New prototype.
        * gdbarch.c: Regenerate.
        * gdbarch.h: Regenerate.
        * gdbarch.sh: Add guess_tracepoint_registers hook.
        * tracefile.c (tracefile_fetch_registers): Use the new gdbarch hook.

2016-02-17  Gary Benson  <gbenson@redhat.com>

        * exec.c (exec_file_locate_attach): Add missing cleanup.

2016-02-16  Don Breazeal  <donb@codesourcery.com>

        PR remote/19496
        * remote.c (remove_new_fork_children): Check for pending
        fork status in thread_info.suspend.

2016-02-16  Yao Qi  <yao.qi@linaro.org>

        * arm-linux-tdep.c (arm_linux_software_single_step): Assign
        'old_chain' later.

2016-02-16  Yao Qi  <yao.qi@linaro.org>

        * arch/arm-get-next-pcs.h (struct arm_get_next_pcs_ops)
        <syscall_next_pc>: Remove argument PC.  Callers updated.
        * arm-linux-tdep.c (arm_linux_get_next_pcs_syscall_next_pc):
        Remove argument PC.  Get pc from regcache_read_pc.
        * arm-tdep.c (arm_get_next_pcs_syscall_next_pc): Remove
        argument PC.

2016-02-15  Yao Qi  <yao.qi@linaro.org>

        * aarch64-tdep.c (aarch64_analyze_prologue): Remove "0x".

2016-02-12  Yao Qi  <yao.qi@linaro.org>

        * arch/arm-linux.c (arm_linux_get_next_pcs_fixup): Calculate
        nextpc according to instruction.

2016-02-12  Yao Qi  <yao.qi@linaro.org>

        * arch/arm-get-next-pcs.c (arm_get_next_pcs): Call
        self->ops->fixup if it isn't NULL.
        * arch/arm-get-next-pcs.h: Include gdb_vecs.h.
        (struct arm_get_next_pcs_ops) <fixup>: New field.
        * arch/arm-linux.c: Include common-regcache.h and
        arch/arm-get-next-pcs.h.
        (arm_linux_get_next_pcs_fixup): New function.
        * arch/arm-linux.h (arm_linux_get_next_pcs_fixup): Declare.
        * arm-linux-tdep.c (arm_linux_get_next_pcs_ops): Initialize
        it with arm_linux_get_next_pcs_fixup.
        (arm_linux_software_single_step): Move code to
        arm_linux_get_next_pcs_fixup.
        * arm-tdep.c (arm_get_next_pcs_ops): Initialize it.

2016-02-12  Marcin Kościelnicki  <koriakin@0x04.net>

        * xml-tdesc.c (target_fetch_description_xml) [!HAVE_LIBEXPAT]: Warn
        and return NULL.

2016-02-12  Markus Metzger  <markus.t.metzger@intel.com>

        * frame.h (skip_tailcall_frames): Update comment.
        * frame.c (skip_artificial_frames, skip_tailcall_frames): Return NULL
        if only artificial frames are found.  Update comment.
        (frame_unwind_caller_id): Handle NULL return.
        (frame_unwind_caller_pc, frame_unwind_caller_arch): Assert that
        skip_artificial_frames does not return NULL.
        (frame_pop): Add an error if only tailcall frames are found.
        * infcmd.c (finish_command): Move skip_tailcall_frames call into
        forward-execution case.  Add an error if only tailcall frames are
        found.

2016-02-12  Markus Metzger  <markus.t.metzger@intel.com>

        * stack.c (frame_info): Check frame_unwind_caller_id.

2016-02-12  Markus Metzger  <markus.t.metzger@intel.com>

        * frame.h (skip_tailcall_frames): New.
        * frame.c (skip_tailcall_frames): New.
        (frame_pop): Call skip_tailcall_frames.
        * infcmd.c (finish_command): Call skip_tailcall_frames.

2016-02-11  Pedro Alves  <palves@redhat.com>

        * Makefile.in (check-parallel): New rule.

2016-02-11  Simon Marchi  <simon.marchi@ericsson.com>

        * arm-tdep.c (arm_skip_prologue): Remove unused variables.
        (arm_analyze_prologue): Likewise.
        (arm_scan_prologue): Likewise.
        (arm_m_exception_prev_register): Likewise.
        (arm_copy_block_xfer): Likewise.
        (thumb2_copy_block_xfer): Likewise.
        (arm_decode_miscellaneous): Likewise.
        (arm_decode_ld_st_word_ubyte): Likewise.
        (arm_decode_svc_copro): Likewise.
        (thumb2_decode_svc_copro): Likewise.
        (thumb_copy_16bit_ldr_literal): Likewise.
        (thumb_copy_pop_pc_16bit): Likewise.
        (decode_thumb_32bit_ld_mem_hints): Likewise.
        (arm_show_force_mode): Likewise.
        (_initialize_arm_tdep): Likewise.
        (arm_record_strx): Likewise.
        (arm_record_extension_space): Likewise.
        (arm_record_data_proc_misc_ld_str): Likewise.
        (arm_record_exreg_ld_st_insn): Likewise.
        (arm_record_vfp_data_proc_insn): Likewise.
        (arm_record_coproc_data_proc): Likewise.
        (thumb_record_misc): Likewise.
        (thumb_record_ldm_stm_swi): Likewise.
        (thumb2_record_ld_st_dual_ex_tbb): Likewise.
        (thumb2_record_ld_mem_hints): Likewise.
        (thumb2_record_lmul_lmla_div): Likewise.
        (thumb2_record_asimd_struct_ld_st): Likewise.
        (arm_process_record): Likewise.

2016-02-11  Simon Marchi  <simon.marchi@ericsson.com>

        * arm-tdep.c (arm_displaced_step_copy_insn): Remove.
        (ARM displaced stepping support): Remove reference to
        arm_displaced_step_copy_insn in comment.
        * arm-tdep.h (arm_displaced_step_copy_insn): Remove.
        * arm-linux-tdep.c (arm_linux_displaced_step_copy_insn): Remove
        reference to arm_displaced_step_copy_insn in comment.

2016-02-11  Simon Marchi  <simon.marchi@ericsson.com>

        * arm-tdep.c (thumb_copy_unmodified_16bit): Change type of insn.
        (thumb_copy_b): Likewise.
        (arm_decode_b_bl_ldmstm): Likewise.
        (thumb_copy_16bit_ldr_literal): Likewise.
        (thumb_copy_pop_pc_16bit): Likewise.

2016-02-11  Antoine Tremblay  <antoine.tremblay@ericsson.com>

        * tracepoint.c (encode_actions_1): Use target_gdbarch () rather
        than loc->gdbarch.

2016-02-10  Marcin Kościelnicki  <koriakin@0x04.net>

        * tracefile-tfile.c (trace_tdesc): New static variable.
        (tfile_open): Clear trace_tdesc, call target_find_description.
        (tfile_interp_line): Recognize tdesc lines.
        (tfile_close): Clear trace_tdesc.
        (tfile_xfer_partial_features): New function.
        (tfile_xfer_partial): Call tfile_xfer_partial_features.
        (tfile_append_tdesc_line): New function.

2016-02-10  Marcin Kościelnicki  <koriakin@0x04.net>

        * ctf.c (ctf_write_tdesc): New function.
        (ctf_write_ops): Wire in ctf_write_tdesc.
        * tracefile-tfile.c (tfile_write_tdesc): New function.
        (tfile_write_ops): Wire in tfile_write_tdesc.
        * tracefile.c (trace_save): Call write_tdesc method.
        * tracefile.h (struct trace_file_write_ops): Add write_tdesc method.
        * xml-tdesc.c (target_fetch_description_xml): New function.
        * xml-tdesc.h: Add target_fetch_description_xml prototype.

2016-02-10  Simon Marchi  <simon.marchi@ericsson.com>

        * arm-tdep.c (arm_copy_extra_ld_st): Fix "unpriveleged" typo.
        (arm_decode_dp_misc): Likewise.

2016-02-10  Marcin Kościelnicki  <koriakin@0x04.net>

        * amd64-tdep.c (amd64_ax_pseudo_register_collect): New function.
        (amd64_init_abi): Fill ax_pseudo_register_collect hook.
        * gdb/i386-tdep.c (i386_pseudo_register_read_into_value): Remove
        misleading comment.
        (i386_pseudo_register_write): Ditto.
        (i386_ax_pseudo_register_collect): New function.
        (i386_gdbarch_init): Fill ax_pseudo_register_collect hook.
        * i386-tdep.h: Add i386_ax_pseudo_register_collect prototype.

2016-02-10  Marcin Kościelnicki  <koriakin@0x04.net>

        * tracefile-tfile.c (tfile_fetch_registers): Use g packet order
        instead of gdb order.

2016-02-10  Marcin Kościelnicki  <koriakin@0x04.net>

        * tracefile-tfile.c (tfile_fetch_registers): Fix off-by-one in bounds
        check.

2016-02-10  Joel Brobecker  <brobecker@adacore.com>

        * NEWS: Create a new section for the next release branch.
        Rename the section of the current branch, now that it has
        been cut.

2016-02-10  Joel Brobecker  <brobecker@adacore.com>

        GDB 7.11 branch created (9ef9e6a6a0dd8f948708cb67c9afcfd0be40cb0a):
        * version.in: Bump version to 7.11.50.DATE-git.

2016-02-09  Keith Seitz  <keiths@redhat.com>

        PR breakpoints/19546
        * breakpoint.c (breakpoint_event_location_empty_p): New function.
        (update_breakpoints_after_exec, bkpt_re_set): Use this new function
        instead of event_location_empty_p.

2016-02-09  Keith Seitz  <keiths@redhat.com>

        * mi/mi-cmd-break.c (mi_cmd_break_insert_1): Use
        string_to_event_location_basic instead of string_to_event_location.

2016-02-09  Keith Seitz  <keiths@redhat.com>

        * guile/scm-breakpoint.c (gdbscm_register_breakpoint_x): Skip
        leading whitespace and use string_to_event_location_basic instead
        of new_linespec_location.

2016-02-09  Keith Seitz  <keiths@redhat.com>

        PR python/19506
        * python/py-breakpoint.c (bppy_init): Use
        string_to_event_location_basic instead of new_linespec_location.

2016-02-09  Keith Seitz  <keiths@redhat.com>

        * location.c (string_to_explicit_location): Note that "-p" is
        reserved for probe locations and return NULL for any input
        that starts with that.
        (string_to_event_location): Move "legacy" linespec code to ...
        (string_to_event_location_basic): ... here.
        * location.h (string_to_event_location): Update comment.
        (string_to_event_location_basic): New function.

2016-02-09  Simon Marchi  <simon.marchi@ericsson.com>

        * configure.ac: Use AC_CONFIG_FILES instead of passing arguments
        to AC_OUTPUT.  Remove "exit 0" at the end.
        * configure: Regenerate.

2016-02-09  Pedro Alves  <palves@redhat.com>

        PR breakpoints/19548
        * breakpoint.c (create_overlay_event_breakpoint): Don't update
        global location list here.
        (create_longjmp_master_breakpoint)
        (create_std_terminate_master_breakpoint)
        (create_exception_master_breakpoint, create_jit_event_breakpoint)
        (update_breakpoint_locations):
        (breakpoint_re_set): Update global location list after all
        breakpoints are re-set.

2016-02-08  Simon Marchi  <simon.marchi@ericsson.com>

        * remote.c (remote_register_number_and_offset): Remove unused
        variable(s).
        (remote_thread_always_alive): Likewise.
        (remote_update_thread_list): Likewise.
        (process_initial_stop_replies): Likewise.
        (remote_start_remote): Likewise.
        (remote_check_symbols): Likewise.
        (discard_pending_stop_replies): Likewise.
        (process_stop_reply): Likewise.
        (putpkt_binary): Likewise.
        (getpkt): Likewise.
        (remote_add_target_side_condition): Likewise.
        (remote_insert_breakpoint): Likewise.
        (remote_supports_stopped_by_sw_breakpoint): Likewise.
        (remote_supports_stopped_by_hw_breakpoint): Likewise.
        (remote_xfer_partial): Likewise.
        (remote_read_btrace): Likewise.
        (remote_async_serial_handler): Likewise.
        (remote_thread_events): Likewise.
        (_initialize_remote): Likewise.

2016-02-07  Simon Marchi  <simon.marchi@polymtl.ca>

        * varobj.h (varobj_delete): Remove dellist parameter, update and
        move documentation here.
        * varobj.c (struct cpstack, cppush, cppop): Remove.
        (delete_variable): Remove resultp (first) parameter.
        (delete_variable_1): Likewise.
        (varobj_delete): Remove dellist parameter and unused code.
        (update_dynamic_varobj_children): Adjust varobj_delete call.
        (update_type_if_necessary): Likewise.
        (varobj_set_visualizer): Likewise.
        (varobj_update): Likewise.
        (value_of_root): Likewise.
        (varobj_invalidate_iter): Likewise.
        * mi/mi-cmd-var.c (mi_cmd_var_delete): Likewise.

2016-02-04  Yao Qi  <yao.qi@linaro.org>

        * remote.c (remote_wait_as): Set rs->waiting_for_stop_reply to
        0 before handling 'F' and set it back afterwards.

2016-02-02  Simon Marchi  <simon.marchi@ericsson.com>

        * ui-out.c (MAX_UI_OUT_LEVELS): Remove.

2016-02-02  Walfred Tedeschi  <walfred.tedeschi@intel.com>

        * amd64-linux-siginfo.c (nat_siginfo_t, nat_sigval_t, nat_timeval):
        New types.
        (compat_siginfo): New bound fields added.
        (compat_x32_siginfo): New field added.
        (cpt_si_addr_lsb): New define.
        (compat_siginfo_from_siginfo): Use nat_siginfo.
        (siginfo_from_compat_siginfo): Use nat_siginfo.
        (compat_x32_siginfo_from_siginfo): Likewise.
        (siginfo_from_compat_x32_siginfo): Likewise.

2016-02-02  Walfred Tedeschi  <walfred.tedeschi@intel.com>

        * linux-tdep.c (linux_get_siginfo_type): Add the _addr_bnd
        structure to the siginfo if extra_fields contains
        LINUX_SIGINFO_FIELD_ADDR_BND.

2016-02-02  Walfred Tedeschi  <walfred.tedeschi@intel.com>

        * linux-tdep.h (linux_get_siginfo_type_with_fields): Make extern.
        * linux-tdep.c (linux_get_siginfo_type_with_fields): Make extern.
        * i386-linux-tdep.h (x86_linux_get_siginfo_type): New
        function.
        * amd64-linux-tdep.c (amd64_linux_init_abi_common): Add
        x86_linux_get_siginfo_type for the amd64 abi.
        * i386-linux-tdep.c (x86_linux_get_siginfo_type): New
        function.
        (i386_linux_init_abi): Add new function at the i386 ABI
        initialization.

2016-02-02  Walfred Tedeschi  <walfred.tedeschi@intel.com>

        * linux-tdep.h (linux_siginfo_extra_field_values): New enum values.
        (linux_siginfo_extra_fields): New enum type.
        * linux-tdep.c (linux_get_siginfo_type_with_fields): New function.
        (linux_get_siginfo_type): Use new function.

2016-02-02  Walfred Tedeschi  <walfred.tedeschi@intel.com>

        * nat/amd64-linux-siginfo.c: New file.
        * nat/amd64-linux-siginfo.h: New file.
        * Makefile.in (HFILES_NO_SRCDIR): Add nat/amd64-linux-siginfo.h.
        (amd64-linux-siginfo.o): New rule.
        * config/i386/linux64.mh (NATDEPFILES): Add amd64-linux-siginfo.o.
        * amd64-linux-nat.c (nat/amd64-linux-siginfo.h): New include.
        (compat_siginfo_from_siginfo, siginfo_from_compat_siginfo)
        (compat_x32_siginfo_from_siginfo, siginfo_from_compat_x32_siginfo)
        (compat_timeval, compat_sigval, compat_x32_clock, cpt_si_pid)
        (cpt_si_uid, cpt_si_timerid, cpt_si_overrun, cpt_si_status)
        (cpt_si_utime, cpt_si_stime, cpt_si_ptr, cpt_si_addr, cpt_si_band)
        (cpt_si_fd, si_timerid, si_overrun): Move to nat/amd64-linux-siginfo.c.

2016-02-01  Andrew Burgess  <andrew.burgess@embecosm.com>

        * value.c (max_value_size): New variable.
        (MIN_VALUE_FOR_MAX_VALUE_SIZE): New define.
        (set_max_value_size): New function.
        (show_max_value_size): New function.
        (check_type_length_before_alloc): New function.
        (allocate_value_contents): Call check_type_length_before_alloc.
        (set_value_enclosing_type): Likewise.
        (_initialize_values): Add set/show handler for max-value-size.
        * NEWS: Mention new set/show command.

2016-01-31  Simon Marchi  <simon.marchi@polymtl.ca>

        * varobj.h (struct varobj): Fix typos in comments.
        (struct lang_varobj_ops): Likewise.
        * varobj.c (VAROBJ_TABLE_SIZE): Likewise.
        (varobj_create): Move misplaced comment.

2016-01-29  Simon Marchi  <simon.marchi@ericsson.com>

        * aarch64-tdep.c (aarch64_record_asimd_load_store): Add braces
        to for include additional lines.
        * xcoffread.c (scan_xcoff_symtab): Remove unnecessary braces.

2016-01-28  Simon Marchi  <simon.marchi@ericsson.com>

        * gnulib/import/Makefile.am: Regenerate.
        * gnulib/import/Makefile.in: Regenerate.
        * gnulib/import/m4/gnulib-cache.m4: Regenerate.
        * gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add rawmemchr.

2016-01-28  Simon Marchi  <simon.marchi@ericsson.com>

        * remote.c (skip_to_semicolon): Remove.
        (remote_parse_stop_reply): Use strchrnul instead of
        skip_to_semicolon.
        * gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add
        strchrnul.
        * gnulib/aclocal.m4: Regenerate.
        * gnulib/config.in: Regenerate.
        * gnulib/configure: Regenerate.
        * gnulib/import/Makefile.am: Regenerate.
        * gnulib/import/Makefile.in: Regenerate.
        * gnulib/import/m4/gnulib-cache.m4: Regenerate.
        * gnulib/import/m4/gnulib-comp.m4: Regenerate.
        * gnulib/import/m4/rawmemchr.m4: New file.
        * gnulib/import/m4/strchrnul.m4: New file.
        * gnulib/import/rawmemchr.c: New file.
        * gnulib/import/rawmemchr.valgrind: New file.
        * gnulib/import/strchrnul.c: New file.
        * gnulib/import/strchrnul.valgrind: New file.

2016-01-28  Yao Qi  <yao.qi@linaro.org>

        * breakpoint.c (build_target_command_list): Don't call continue
        if aexpr is NULL.
        (build_target_condition_list): Likewise.

2016-01-27  Kevin Buettner  <kevinb@redhat.com>

        * rx-tdep.c (rx_push_dummy_call): Treat scalars larger than 8
        bytes as aggregates.

2016-01-27  Joel Brobecker  <brobecker@adacore.com>

        * MAINTAINERS (Responsible Maintainers): Add Keith Seitz as
        Linespec Maintainers.

2016-01-26  Simon Marchi  <simon.marchi@ericsson.com>

        * common/common-utils.c (skip_spaces): Fix comment.
        (skip_to_space_const): Likewise.

2016-01-25  Yao Qi  <yao.qi@linaro.org>

        * arch/arm-get-next-pcs.c (thumb_deal_with_atomic_sequence_raw):
        Remove argument pc.  Get pc by regcache_read_pc.  Callers updated.
        (arm_deal_with_atomic_sequence_raw): Likewise.
        (thumb_get_next_pcs_raw): Likewise.
        (arm_get_next_pcs_raw): Likewise.
        (arm_get_next_pcs): Remove argument pc.  Callers updated.
        * arch/arm-get-next-pcs.h (arm_get_next_pcs): Update declaration.

2016-01-25  Mark Wielaard  <mjw@redhat.com>

        * ada-lang.c (ada_evaluate_subexp): Add proper else block.
        * c-typeprint.c (c_type_print_base): Fix misleading indentation of
        if statement.
        * inflow.c (child_terminal_ours_1): Fix misleading indentation of
        statement block by introducing an else.
        * linux-record.c (record_linux_sockaddr): Fix misleading indentation
        of return statements.
        (record_linux_msghdr): Likewise.

2016-01-25  Pedro Alves  <palves@redhat.com>

        PR threads/19461
        * infrun.c (handle_inferior_event_1) <fork/vfork>: Update
        parent/child running states.

2016-01-25  Pedro Alves  <palves@redhat.com>

        PR gdb/19494
        * linux-nat.c (kill_one_lwp): New, factored out from ...
        (kill_callback): ... this.
        (kill_wait_callback): New, factored out from ...
        (kill_wait_one_lwp): ... this.
        (kill_unfollowed_fork_children): New function.
        (linux_nat_kill): Use it.

2016-01-22  John Baldwin  <jhb@FreeBSD.org>

        * fbsd-nat.c (fbsd_pid_to_str): Adjust string format.

2016-01-22  Yao Qi  <yao.qi@linaro.org>

        * arm-linux-nat.c (fetch_fpregs): Call perror_with_name
        instead of warning.
        (store_fpregs, fetch_regs, store_regs): Likewise.
        (fetch_wmmx_regs, store_wmmx_regs): Likewise.
        (fetch_vfp_regs, store_vfp_regs): Likewise.

2016-01-21  Doug Evans  <dje@google.com>

        * breakpoint.c (init_breakpoint_sal): Add comment.

2016-01-21  Marcin Kościelnicki  <koriakin@0x04.net>

        * ax-gdb.c (gen_traced_pop): Use gen_fetch for string collection.

2016-01-21  Andrew Burgess  <andrew.burgess@embecosm.com>

        * disasm.c (maybe_add_dis_line_entry): Rename to...
        (add_dis_line_entry): ...this, and update header comment.
        (do_mixed_source_and_assembly): Now use add_dis_line_entry.

2016-01-21  Pedro Alves  <palves@redhat.com>

        * Makefile.in (COMPILER_CFLAGS): New.
        (CXXFLAGS): Get it from configure.
        (INTERNAL_CFLAGS_BASE, INTERNAL_LDFLAGS): Use COMPILER_CFLAGS
        instead of CFLAGS.
        * build-with-cxx.m4 (GDB_AC_BUILD_WITH_CXX): Set and AC_SUBST
        COMPILER_CFLAGS.
        * configure: Regenerate.

2016-01-21  Joel Brobecker  <brobecker@adacore.com>

        * location.h (new_address_location): Add new parameters
        "addr_string" and "addr_string_len".
        (get_address_string_location): Add declaration.
        * location.c (new_address_location): Add new parameters
        "addr_string" and "addr_string_len".  If not NULL, store
        a copy of the addr_string in the new location as well.
        (get_address_string_location): New function.
        (string_to_event_location): Update call to new_address_location.
        * linespec.c (event_location_to_sals) <ADDRESS_LOCATION>:
        Save the event location in the parser's state before
        passing it to convert_address_location_to_sals.
        * breakpoint.c (create_thread_event_breakpoint): Update call
        to new_address_location.
        (init_breakpoint_sal): Get the event location's string, if any,
        and use it to update call to new_address_location.
        * python/py-finishbreakpoint.c (bpfinishpy_init):
        Update call to new_address_location.
        * spu-tdep.c (spu_catch_start): Likewise.

        * config/djgpp/fnchange.lst: Add entries for
        gdb/testsuite/gdb.base/break-fun-addr1.c and
        gdb/testsuite/gdb.base/break-fun-addr2.c.

2016-01-21  Yao Qi  <yao.qi@linaro.org>

        * arm-linux-tdep.c (arm_linux_sigreturn_next_pc): Add parameter
        is_thumb and set it according to CPSR saved on the stack.
        (arm_linux_get_next_pcs_syscall_next_pc): Pass is_thumb to
        arm_linux_sigreturn_next_pc.

2016-01-20  Simon Marchi  <simon.marchi@polymtl.ca>

        * python/lib/gdb/printing.py (FlagEnumerationPrinter.__call__):
        Fix enumerators sort key function.

2016-01-20  Joel Brobecker  <brobecker@adacore.com>

        * printcmd.c (print_scalar_formatted): Move binary operator from
        end of line to beginning of next line.  Adjust formatting
        accordingly.

2016-01-19  John Baldwin  <jhb@FreeBSD.org>

        * fbsd-nat.c (fbsd_pid_to_exec_file): Use new "buflen" instead of
        "len" with sysctl.

2016-01-19  John Baldwin  <jhb@FreeBSD.org>

        * fbsd-tdep.c (find_stop_signal): Remove.
        (struct fbsd_collect_regset_section_cb) <lwp>: New field.
        <stop_signal>: New field.
        <abort_iteration>: New field.
        (fbsd_collect_regset_section_cb): Use new fields.
        (fbsd_collect_thread_registers): New function.
        (struct fbsd_corefile_thread_data): New structure.
        (fbsd_corefile_thread): New function.
        (fbsd_make_corefile_notes): Use new function to dump notes for each
        non-exited thread in a process.

2016-01-19  John Baldwin  <jhb@FreeBSD.org>

        * configure.ac: Check for support for LWP names on FreeBSD.
        * fbsd-nat.c [PT_LWPINFO] New variable debug_fbsd_lwp.
        [TDP_RFPPWAIT || HAVE_STRUCT_PTRACE_LWPINFO_PL_TDNAME]
        (fbsd_fetch_kinfo_proc): Move function earlier.
        [PT_LWPINFO] (fbsd_thread_alive): New function.
        [PT_LWPINFO] (fbsd_pid_to_str): New function.
        [HAVE_STRUCT_PTRACE_LWPINFO_PL_TDNAME] (fbsd_thread_name): New function.
        [PT_LWP_EVENTS] (fbsd_enable_lwp_events): New function.
        [PT_LWPINFO] (fbsd_add_threads): New function.
        [PT_LWPINFO] (fbsd_update_thread_list): New function.
        [PT_LWPINFO] New variable super_resume.
        [PT_LWPINFO] (resume_one_thread_cb): New function.
        [PT_LWPINFO] (resume_all_threads_cb): New function.
        [PT_LWPINFO] (fbsd_resume): New function.
        (fbsd_remember_child): Save full ptid instead of plain pid.
        (fbsd_is_child_pending): Return ptid of saved child process.
        (fbsd_wait): Include lwp in returned ptid and switch to LWP ptid on
        first stop.
        [PT_LWP_EVENTS] Handle LWP events.
        [TDP_RFPPWAIT] Include LWP in child ptid.
        (fbsd_post_startup_inferior) [PT_LWP_EVENTS]: Enable LWP events.
        (fbsd_post_attach) [PT_LWP_EVENTS]: Enable LWP events.
        Add threads for existing processes.
        (fbsd_nat_add_target) [PT_LWPINFO]: Set "to_thread_alive" to
        "fbsd_thread_alive".
        Set "to_pid_to_str" to "fbsd_pid_to_str".
        [HAVE_STRUCT_PTRACE_LWPINFO_PL_TDNAME]: Set "to_thread_name" to
        "fbsd_thread_name".
        [PT_LWPINFO]: Set "to_update_thread_list" to "fbsd_update_thread_list".
        Set "to_has_thread_control" to "tc_schedlock".
        Set "to_resume" to "fbsd_resume".
        (_initialize_fbsd_nat): New function.
        * configure: Regenerate.
        * config.in: Regenerate.

2016-01-19  John Baldwin  <jhb@FreeBSD.org>

        * amd64bsd-nat.c (amd64bsd_fetch_inferior_registers): Use
        get_ptrace_pid.
        (amd64bsd_store_inferior_registers): Use get_ptrace_pid.
        (amd64bsd_dr_get): Use get_ptrace_pid.
        (amd64bsd_dr_set): Use get_ptrace_pid.
        * i386bsd-nat.c (i386bsd_fetch_inferior_registers): Use get_ptrace_pid.
        (i386bsd_store_inferior_registers): Use get_ptrace_pid.
        (i386bsd_dr_get): Use get_ptrace_pid.
        (i386bsd_dr_set): Use get_ptrace_pid.
        * inf-ptrace.c (get_ptrace_pid): Export.
        * inf-ptrace.h (get_ptrace_pid): Declare.
        * ppcfbsd-nat.c (ppcfbsd_fetch_inferior_registers): Use lwp id.
        (ppcfbsd_store_inferior_registers): Use lwp id.

2016-01-19  John Baldwin  <jhb@FreeBSD.org>

        * fbsd_tdep.c (fbsd_core_pid_to_str): New function.
        (fbsd_core_thread_name): New function.
        (fbsd_init_abi): Add "core_pid_to_str" gdbarch method.
        Add "core_thread_name" gdbarch method.

2016-01-19  John Baldwin  <jhb@FreeBSD.org>

        * corelow.c (core_thread_name): New function.
        (init_core_ops): Use "core_thread_name" for the "to_thread_name"
        target op.
        * gdbarch.sh (core_thread_name): New gdbarch callback.
        * gdbarch.h: Re-generate.
        * gdbarch.c: Re-generate.

2016-01-19  Simon Marchi  <simon.marchi@polymtl.ca>

        * python/lib/gdb/printing.py (_EnumInstance.to_string): Explicitly
        convert gdb.Value to integer type using int().

2016-01-19  John Baldwin  <jhb@FreeBSD.org>

        * configure.ac: Include <sys/types.h when checking for "r_fs" in
        "struct reg".
        * configure: Regenerate.

2016-01-19  Pedro Alves  <palves@redhat.com>

        * ax-gdb.c (agent_command_1): Adjust call to decode_line_full.
        * break-catch-throw.c (re_set_exception_catchpoint): Pass the
        current program space down to linespec decoding and breakpoint
        location updating.
        * breakpoint.c (parse_breakpoint_sals): Adjust calls to
        decode_line_full.
        (until_break_command): Adjust calls to decode_line_1.
        (base_breakpoint_decode_location, bkpt_decode_location): Add
        'search_pspace' parameter.  Pass it along.
        (bkpt_probe_create_sals_from_location): Adjust calls to
        parse_probes.
        (tracepoint_decode_location, tracepoint_probe_decode_location)
        (strace_marker_decode_location): Add 'search_pspace' parameter.
        Pass it along.
        (all_locations_are_pending): Rewrite to take a breakpoint and
        program space as arguments instead.
        (hoist_existing_locations): New function.
        (update_breakpoint_locations): Add 'filter_pspace' parameter.  Use
        hoist_existing_locations instead of always removing all locations,
        and adjust to all_locations_are_pending change.
        (location_to_sals): Add 'search_pspace' parameter.  Pass it along.
        Don't disable the breakpoint if there are other locations in
        another program space.
        (breakpoint_re_set_default): Adjust to pass down the current
        program space as filter program space.
        (decode_location_default): Add 'search_pspace' parameter and pass
        it along.
        (prepare_re_set_context): Don't switch program space here.
        (breakpoint_re_set): Use save_current_space_and_thread instead of
        save_current_program_space.
        * breakpoint.h (struct breakpoint_ops) <decode_location>: Add
        'search_pspace' parameter.
        (update_breakpoint_locations): Add 'filter_pspace' parameter.
        * cli/cli-cmds.c (edit_command, list_command): Adjust calls to
        decode_line_1.
        * elfread.c (elf_gnu_ifunc_resolver_return_stop): Pass the current
        program space as filter program space.
        * linespec.c (struct linespec_state) <search_pspace>: New field.
        (create_sals_line_offset, convert_explicit_location_to_sals)
        (parse_linespec): Pass the search program space down.
        (linespec_state_constructor): Add 'search_pspace' parameter.
        Store it.
        (linespec_parser_new): Add 'search_pspace' parameter and pass it
        along.
        (linespec_lex_to_end): Adjust.
        (decode_line_full, decode_line_1): Add 'search_pspace' parameter
        and pass it along.
        (decode_line_with_last_displayed): Adjust.
        (collect_symtabs_from_filename, symtabs_from_filename): New
        'search_pspace' parameter.  Use it.
        (find_function_symbols): Pass the search program space down.
        * linespec.h (decode_line_1, decode_line_full): Add
        'search_pspace' parameter.
        * probe.c (parse_probes_in_pspace): New function, factored out
        from ...
        (parse_probes): ... this.  Add 'search_pspace' parameter and use
        it.
        * probe.h (parse_probes): Add pspace' parameter.
        * python/python.c (gdbpy_decode_line): Adjust.
        * tracepoint.c (scope_info): Adjust.

2016-01-18  Maciej W. Rozycki  <macro@imgtec.com>

        * mips-tdep.c (mips_insn_size): Remove 48-bit microMIPS
        instruction support.
        (micromips_next_pc): Likewise.
        (micromips_scan_prologue): Likewise.
        (micromips_deal_with_atomic_sequence): Likewise.
        (micromips_stack_frame_destroyed_p): Likewise.
        (mips_breakpoint_from_pc): Likewise.

2016-01-18  Maciej W. Rozycki  <macro@imgtec.com>

        * mips-tdep.c (micromips_insn_at_pc_has_delay_slot): Pass
        unshifted 16-bit microMIPS instruction word to `mips_insn_size'.

2016-01-18  Pedro Alves  <palves@redhat.com>

        * NEWS: Mention that GDB now displays the ID and name of the
        thread that hit a breakpoint or received a signal.
        * break-catch-sig.c (signal_catchpoint_print_it): Use
        maybe_print_thread_hit_breakpoint.
        * break-catch-syscall.c (print_it_catch_syscall): Likewise.
        * break-catch-throw.c (print_it_exception_catchpoint): Likewise.
        * breakpoint.c (maybe_print_thread_hit_breakpoint): New function.
        (print_it_catch_fork, print_it_catch_vfork, print_it_catch_solib)
        (print_it_catch_exec, print_it_ranged_breakpoint)
        (print_it_watchpoint, print_it_masked_watchpoint, bkpt_print_it):
        Use maybe_print_thread_hit_breakpoint.
        * breakpoint.h (maybe_print_thread_hit_breakpoint): Declare.
        * gdbthread.h (show_thread_that_caused_stop): Declare.
        * infrun.c (print_signal_received_reason): Print which thread
        received signal.
        * thread.c (show_thread_that_caused_stop): New function.

2016-01-18  Gary Benson  <gbenson@redhat.com>

        * nat/linux-namespaces.c (do_fork): New function.
        (linux_mntns_get_helper): Use the above.

2016-01-17  Jonas Hahnfeld <Hahnfeld@itc.rwth-aachen.de>  (tiny change)

        Pushed by Joel Brobecker  <brobecker@adacore.com>.
        PR gdb/19208
        * dwarf2read.c (read_partial_die): Do not call set_objfile_main_name
        if the function has no name.

2016-01-15  Sandra Loosemore  <sandra@codesourcery.com>

        * charset.c [PHONY_ICONV] (GDB_DEFAULT_HOST_CHARSET):
        Conditionalize for Windows host.
        (GDB_DEFAULT_TARGET_CHARSET): Match GDB_DEFAULT_HOST_CHARSET.
        (GDB_DEFAULT_TARGET_WIDE_CHARSET): Use UTF-32.
        (phony_iconv_open): Handle both UTF-32 endiannesses.
        (phony_iconv): Likewise.  Check for output overflow and clean up
        out-of-input cases.  Correct adjustment to input buffer pointer.
        (set_be_le_names) [PHONY_ICONV]: Use hard-wired names to match
        phony_iconv_open.

2016-01-15  Pedro Alves  <palves@redhat.com>

        * NEWS: Mention star wildcard ranges.
        * cli/cli-utils.c (get_number_or_range): Check state->in_range first.
        (number_range_setup_range): New function.
        * cli/cli-utils.h (number_range_setup_range): New declaration.
        * thread.c (thread_apply_command): Support star TID ranges.
        * tid-parse.c (tid_range_parser_finished)
        (tid_range_parser_string, tid_range_parser_skip)
        (get_tid_or_range, get_tid_or_range): Handle
        TID_RANGE_STATE_STAR_RANGE.
        (tid_range_parser_star_range): New function.
        * tid-parse.h (enum tid_range_state) <TID_RANGE_STATE_STAR_RANGE>:
        New value.
        (tid_range_parser_star_range): New declaration.

2016-01-15  Pedro Alves  <palves@redhat.com>

        * thread.c (thread_apply_command): Use the tid range parser to
        advance past the thread ID list.
        * tid-parse.c (get_positive_number_trailer): New function.
        (parse_thread_id): Use it.
        (get_tid_or_range): Use it.  Return 0 instead of throwing invalid
        thread ID error.
        (get_tid_or_range): Detect negative values.  Return 0 instead of
        throwing invalid thread ID error.

2016-01-14  Yao Qi  <yao.qi@linaro.org>

        * arm-linux-tdep.c (arm_linux_get_next_pcs_syscall_next_pc):
        Declare.
        (arm_linux_get_next_pcs_ops): Install
        arm_linux_get_next_pcs_syscall_next_pc.
        (arm_linux_syscall_next_pc): Change to ...
        (arm_linux_get_next_pcs_syscall_next_pc): ... it.
        (arm_linux_init_abi): Don't set tdep->syscall_next_pc.
        * arm-tdep.c (arm_get_next_pcs_syscall_next_pc): Declare.
        (arm_get_next_pcs_syscall_next_pc): Make it static.  Don't
        call tdep->syscall_next_pc.
        * arm-tdep.h (struct gdbarch_tdep) <syscall_next_pc>: Remove.
        (arm_get_next_pcs_syscall_next_pc): Remove.

2016-01-14  Yao Qi  <yao.qi@linaro.org>

        * remote.c (remote_set_syscall_catchpoint): Cast to char *.
        * thread.c (do_captured_thread_select): Cast to const char *.

2016-01-14  Yao Qi  <yao.qi@linaro.org>

        * arch/arm-get-next-pcs.c (arm_get_next_pcs_ctor): Change
        argument arm_thumb2_breakpoint to has_thumb2_breakpoint.
        (thumb_get_next_pcs_raw): Check has_thumb2_breakpoint
        instead.
        * arch/arm-get-next-pcs.h (struct arm_get_next_pcs)
        <arm_thumb2_breakpoint>: Remove.
        <has_thumb2_breakpoint>: New field.
        (arm_get_next_pcs_ctor): Update declaration.
        * arm-linux-tdep.c (arm_linux_software_single_step): Pass
        1 to arm_get_next_pcs_ctor.
        * arm-tdep.c (arm_software_single_step): Pass 0 to
        arm_get_next_pcs_ctor.

2016-01-13  Ulrich Weigand  <uweigand@de.ibm.com>

        * MAINTAINERS: Add Andreas Arnez as s390 target maintainer.

2016-01-13  Yao Qi  <yao.qi@linaro.org>

        * arch/arm-get-next-pcs.c (arm_get_next_pcs_raw): Use
        byte_order_for_code to read instruction.

2016-01-13  Pedro Alves  <palves@redhat.com>

        * NEWS: Mention $_gthread.
        * gdbthread.h (struct thread_info) <global_num>: Mention
        $_gthread.
        * thread.c (thread_num_make_value_helper): New function.
        (thread_id_make_value): Delete.
        (thread_id_per_inf_num_make_value, global_thread_id_make_value):
        New.
        (thread_funcs): Adjust.
        (gthread_funcs): New.
        (_initialize_thread): Register $_gthread variable.

2016-01-13  Pedro Alves  <palves@redhat.com>

        * NEWS: Mention "info threads -gid".
        * gdbthread.h (struct thread_info) <global_num>: Mention "info
        threads -gid".
        * thread.c (info_threads_command): Handle "-gid".
        (_initialize_thread): Adjust "info threads" help string to mention
        -gid.

2016-01-13  Pedro Alves  <palves@redhat.com>

        * NEWS: Mention InferiorThread.global_num.
        * python/py-infthread.c (thpy_get_global_num): New function.
        (thread_object_getset): Register "global_num".

2016-01-13  Pedro Alves  <palves@redhat.com>

        * NEWS: Mention that thread IDs are now per inferior and global
        thread IDs.
        * Makefile.in (SFILES): Add tid-parse.c.
        (COMMON_OBS): Add tid-parse.o.
        (HFILES_NO_SRCDIR): Add tid-parse.h.
        * ada-tasks.c: Adjust to use ptid_to_global_thread_id.
        * breakpoint.c (insert_breakpoint_locations)
        (remove_threaded_breakpoints, bpstat_check_breakpoint_conditions)
        (print_one_breakpoint_location, set_longjmp_breakpoint)
        (check_longjmp_breakpoint_for_call_dummy)
        (set_momentary_breakpoint): Adjust to use global IDs.
        (find_condition_and_thread, watch_command_1): Use parse_thread_id.
        (until_break_command, longjmp_bkpt_dtor)
        (breakpoint_re_set_thread, insert_single_step_breakpoint): Adjust
        to use global IDs.
        * dummy-frame.c (pop_dummy_frame_bpt): Adjust to use
        ptid_to_global_thread_id.
        * elfread.c (elf_gnu_ifunc_resolver_stop): Likewise.
        * gdbthread.h (struct thread_info): Rename field 'num' to
        'global_num.  Add new fields 'per_inf_num' and 'inf'.
        (thread_id_to_pid): Rename thread_id_to_pid to
        global_thread_id_to_ptid.
        (pid_to_thread_id): Rename to ...
        (ptid_to_global_thread_id): ... this.
        (valid_thread_id): Rename to ...
        (valid_global_thread_id): ... this.
        (find_thread_id): Rename to ...
        (find_thread_global_id): ... this.
        (ALL_THREADS, ALL_THREADS_BY_INFERIOR): Declare.
        (print_thread_info): Add comment.
        * tid-parse.h: New file.
        * tid-parse.c: New file.
        * infcmd.c (step_command_fsm_prepare)
        (step_command_fsm_should_stop): Adjust to use the global thread
        ID.
        (until_next_command, until_next_command)
        (finish_command_fsm_should_stop): Adjust to use the global thread
        ID.
        (attach_post_wait): Adjust to check the inferior number too.
        * inferior.h (struct inferior) <highest_thread_num>: New field.
        * infrun.c (handle_signal_stop)
        (insert_exception_resume_breakpoint)
        (insert_exception_resume_from_probe): Adjust to use the global
        thread ID.
        * record-btrace.c (record_btrace_open): Use global thread IDs.
        * remote.c (process_initial_stop_replies): Also consider the
        inferior number.
        * target.c (target_pre_inferior): Clear the inferior's highest
        thread num.
        * thread.c (clear_thread_inferior_resources): Adjust to use the
        global thread ID.
        (new_thread): New inferior parameter.  Adjust to use it.  Set both
        the thread's global ID and the thread's per-inferior ID.
        (add_thread_silent): Adjust.
        (find_thread_global_id): New.
        (find_thread_id): Make static.  Adjust to rename.
        (valid_thread_id): Rename to ...
        (valid_global_thread_id): ... this.
        (pid_to_thread_id): Rename to ...
        (ptid_to_global_thread_id): ... this.
        (thread_id_to_pid): Rename to ...
        (global_thread_id_to_ptid): ... this.  Adjust.
        (first_thread_of_process): Adjust.
        (do_captured_list_thread_ids): Adjust to use global thread IDs.
        (should_print_thread): New function.
        (print_thread_info): Rename to ...
        (print_thread_info_1): ... this, and add new show_global_ids
        parameter.  Handle it.  Iterate over inferiors.
        (print_thread_info): Reimplement as wrapper around
        print_thread_info_1.
        (show_inferior_qualified_tids): New function.
        (print_thread_id): Use it.
        (tp_array_compar): Compare inferior numbers too.
        (thread_apply_command): Use tid_range_parser.
        (do_captured_thread_select): Use parse_thread_id.
        (thread_id_make_value): Adjust.
        (_initialize_thread): Adjust "info threads" help string.
        * varobj.c (struct varobj_root): Update comment.
        (varobj_create): Adjust to use global thread IDs.
        (value_of_root_1): Adjust to use global_thread_id_to_ptid.
        * windows-tdep.c (display_tib): No longer accept an argument.
        * cli/cli-utils.c (get_number_trailer): Make extern.
        * cli/cli-utils.h (get_number_trailer): Declare.
        (get_number_const): Adjust documentation.
        * mi/mi-cmd-var.c (mi_cmd_var_update_iter): Adjust to use global
        thread IDs.
        * mi/mi-interp.c (mi_new_thread, mi_thread_exit)
        (mi_on_normal_stop, mi_output_running_pid, mi_on_resume):
        * mi/mi-main.c (mi_execute_command, mi_cmd_execute): Likewise.
        * guile/scm-breakpoint.c (gdbscm_set_breakpoint_thread_x):
        Likewise.
        * python/py-breakpoint.c (bppy_set_thread): Likewise.
        * python/py-finishbreakpoint.c (bpfinishpy_init): Likewise.
        * python/py-infthread.c (thpy_get_num): Add comment and return the
        per-inferior thread ID.
        (thread_object_getset): Update comment of "num".

2016-01-13  Pedro Alves  <palves@redhat.com>

        * breakpoint.c (remove_threaded_breakpoints)
        (print_one_breakpoint_location): Use print_thread_id.
        * btrace.c (btrace_enable, btrace_disable, btrace_teardown)
        (btrace_fetch, btrace_clear): Use print_thread_id.
        * common/print-utils.c (CELLSIZE): Delete.
        (get_cell): Rename to ...
        (get_print_cell): ... this and made extern.  Adjust call callers.
        Adjust to use PRINT_CELL_SIZE.
        * common/print-utils.h (get_print_cell): Declare.
        (PRINT_CELL_SIZE): New.
        * gdbthread.h (print_thread_id): Declare.
        * infcmd.c (signal_command): Use print_thread_id.
        * inferior.c (print_inferior): Use print_thread_id.
        * infrun.c (handle_signal_stop)
        (insert_exception_resume_breakpoint)
        (insert_exception_resume_from_probe)
        (print_signal_received_reason): Use print_thread_id.
        * record-btrace.c (record_btrace_info)
        (record_btrace_resume_thread, record_btrace_cancel_resume)
        (record_btrace_step_thread, record_btrace_wait): Use
        print_thread_id.
        * thread.c (thread_apply_all_command): Use print_thread_id.
        (print_thread_id): New function.
        (thread_apply_command): Use print_thread_id.
        (thread_command, thread_find_command, do_captured_thread_select):
        Use print_thread_id.

2016-01-13  Pedro Alves  <palves@redhat.com>

        * NEWS: Mention InferiorThread.inferior.
        * python/py-infthread.c (thpy_get_inferior): New.
        (thread_object_getset): Register "inferior".

2016-01-13  Pedro Alves  <palves@redhat.com>

        * NEWS: Mention $_inferior.
        * inferior.c (inferior_id_make_value): New.
        (inferior_funcs): New.
        (_initialize_inferior): Create $_inferior variable.

2016-01-13  Pedro Alves  <palves@redhat.com>

        PR breakpoints/19388
        * frame.c (get_current_frame): Use validate_registers_access.
        * gdbthread.h (validate_registers_access): Declare.
        * infrun.c (validate_siginfo_access): Delete.
        (siginfo_value_read, siginfo_value_write): Use
        validate_registers_access.
        * thread.c (validate_registers_access): New function.

2016-01-12  Josh Stone  <jistone@redhat.com>
            Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * NEWS (Changes since GDB 7.10): Mention QCatchSyscalls and the
        syscall_entry and syscall_return stop reasons.  Mention GDB
        support for remote catch syscall.
        * remote.c (PACKET_QCatchSyscalls): New enum.
        (remote_set_syscall_catchpoint): New function.
        (remote_protocol_features): New element for QCatchSyscalls.
        (remote_parse_stop_reply): Parse syscall_entry/return stops.
        (init_remote_ops): Install remote_set_syscall_catchpoint.
        (_initialize_remote): Config QCatchSyscalls.
        * linux-nat.h (struct lwp_info) <syscall_state>: Comment typo.

2016-01-12  Yao Qi  <yao.qi@linaro.org>

        * nat/linux-ptrace.c (linux_child_function): Cast child_stack
        to gdb_byte * and pass to linux_fork_to_function.

2016-01-12  Yao Qi  <yao.qi@linaro.org>

        * nat/linux-ptrace.c (linux_fork_to_function): Change type
        of argument 'function'.
        (linux_grandchild_function): Change return type to 'int'.
        Change child_stack's type to 'void *'.
        (linux_child_function): Likewise.

2016-01-12  Pedro Alves  <palves@redhat.com>

        Remove use of the registered trademark symbol throughout.

2016-01-12  Thomas Schwinge  <thomas@codesourcery.com>

        * reply_mig_hack.awk: Rewrite one regular expression.

2016-01-11  Mike Frysinger  <vapier@gentoo.org>

        * acinclude.m4: Include new warning.m4 file.
        * configure: Regenerated.
        * configure.ac: Move all warning logic ...
        * warning.m4: ... here.

2016-01-08  Yao Qi  <yao.qi@linaro.org>

        * extension.c: Include target.h.
        (set_active_ext_lang): Only call install_gdb_sigint_handler,
        check_quit_flag, and set_quit_flag if target_terminal_is_ours
        returns false.
        (restore_active_ext_lang): Likewise.
        * target.c (target_terminal_is_ours): New function.
        * target.h (target_terminal_is_ours): Declare.

2016-01-07  Maciej W. Rozycki  <macro@imgtec.com>

        * mips-tdep.c (mips_breakpoint_from_pc): Rename local `status'
        to `err' in the little-endian leg.

2016-01-06  Yao Qi  <yao.qi@linaro.org>

        * arch/arm-get-next-pcs.c (arm_get_next_pcs): Move it to some
        lines below.
        (thumb_get_next_pcs_raw): Make it static.
        (arm_get_next_pcs_raw): Likewise.
        * arch/arm-get-next-pcs.h (thumb_get_next_pcs_raw): Remove the
        declaration.
        (arm_get_next_pcs_raw): Likewise.

2016-01-05  Mike Frysinger  <vapier@gentoo.org>

        * version.in: Change cvs to git.

2016-01-05  Mike Frysinger  <vapier@gentoo.org>

        * configure.tgt (score-*-*): Delete gdb_sim assignment.

2016-01-05  Pedro Alves  <palves@redhat.com>

        PR sim/13418
        * configure.ac: Define WITH_PPC_SIM when linking in the sim and
        the target is powerpc*.
        * rs6000-tdep.c (init_sim_regno_table): Check WITH_PPC_SIM instead
        of WITH_SIM.
        * configure: Regenerate.
        * config.in: Regenerate.

2016-01-04  Markus Metzger  <markus.t.metzger@intel.com>

        * btrace.c (btrace_pt_readmem_callback): Do not return in TRY/CATCH.

2016-01-02  Mike Frysinger  <vapier@gentoo.org>

        * configure.tgt (powerpc*-*-*): Delete test call and
        always assign gdb_sim.

2016-01-01  Joel Brobecker  <brobecker@adacore.com>

        Update year range in copyright notice of all files.

2016-01-01  Joel Brobecker  <brobecker@adacore.com>

        * top.c (print_gdb_version): Change copyright year in version
        message.

2016-01-01  Joel Brobecker  <brobecker@adacore.com>

        * config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2015.

For older changes see ChangeLog-2015.
\f
Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
coding: utf-8
End: