gdb/ChangeLog

   1 2008-02-20  Markus Deuling  <deuling@de.ibm.com>
   2             Mark Kettenis  <kettenis@gnu.org>
   3
   4         * alpha-tdep.c (alpha_heuristic_unwind_cache): Replace saved_regs by
   5         trad_frame_saved_reg.
   6         (trad-frame.h): New include.
   7
   8         (alpha_heuristic_frame_unwind_cache): Use trad_frame_alloc_saved_regs
   9         instead of frame_obstack_zalloc.
  10         (alpha_heuristic_frame_prev_register): Use trad_frame_get_prev_register.
  11
  12         * Makefile.in (alpha-tdep.o): Add dependency to trad_frame_h.
  13
  14 2008-02-20  Markus Deuling  <deuling@de.ibm.com>
  15
  16         * rs6000-tdep.c (gdb_print_insn_powerpc): Get the current endianess
  17         from disassemble_info instead of gdbarch_byte_order.
  18
  19         * mips-tdep.c (gdb_print_insn_mips): Likewise.
  20         * arm-tdep.c (gdb_print_insn_arm): Likewise.
  21
  22 2008-02-20  Markus Deuling  <deuling@de.ibm.com>
  23
  24         * gdbarch.sh (memory_insert_breakpoint, memory_remove_breakpoint): Add
  25         gdbarch as parameter.
  26
  27         * gdbarch.{c,h}: Regenerate.
  28
  29         * ppc-tdep.h (ppc_linux_memory_remove_breakpoint): Add gdbarch as
  30         parameter.
  31         * mem-break.c (default_memory_insert_breakpoint)
  32         (default_memory_remove_breakpoint): Likewise.
  33         * target.h (default_memory_remove_breakpoint)
  34         (default_memory_insert_breakpoint): Likewise.
  35
  36         * ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Add gdbarch as
  37         parameter. Replace current_gdbarch by gdbarch.
  38         * m32r-tdep.c (m32r_memory_insert_breakpoint)
  39         (m32r_memory_remove_breakpoint): Likewise.
  40
  41 2008-02-19  Daniel Jacobowitz  <dan@codesourcery.com>
  42
  43         * MAINTAINERS: Add Vladimir Prus as MI maintainer.
  44
  45 2008-02-19  Joel Brobecker  <brobecker@adacore.com>
  46
  47         * NEWS: Add entry describing Add support improvements.
  48
  49 2008-02-18  Markus Deuling  <deuling@de.ibm.com>
  50
  51         * m68klinux-nat.c (getfpregs_supplies): Replace gdbarch_fp0_regnum by
  52         M68K_FP0_REGNUM.
  53
  54 2008-02-18  Markus Deuling  <deuling@de.ibm.com>
  55
  56         * sentinel-frame.c (sentinel_frame_prev_register): Do not call
  57         register_offset_hack anymore.
  58
  59         * regcache.{c,h} (register_offset_hack): Remove.
  60
  61 2008-02-18  Markus Deuling  <deuling@de.ibm.com>
  62
  63         * hppa-tdep.h (find_global_pointer): Add gdbarch as parameter.
  64
  65         * hppa-hpux-tdep.c (hppa32_hpux_find_global_pointer): Likewise. Replace
  66         current_gdbarch by gdbarch.
  67         (hppa64_hpux_find_global_pointer): Likewise.
  68         * hppa-tdep.c (hppa_find_global_pointer): Likewise.
  69         (hppa32_push_dummy_call, hppa64_push_dummy_call): Update call for
  70         find_global_pointer.
  71
  72         * hppabsd-tdep.c (hppabsd_find_global_pointer): Add gdbarch as
  73         parameter.
  74         * hppa-linux-tdep.c (hppa_linux_find_global_pointer): Likewise.
  75
  76         * hppa-linux-nat.c (hppa_linux_register_addr): Use ARRAY_SIZE instead
  77         of gdbarch_num_regs.
  78
  79         * hppa-hpux-tdep.c (hppa_hpux_sr_for_addr): Add gdbarch as parameter and
  80         replace current_gdbarch by gdbarch.
  81         (hppa_hpux_push_dummy_code): Update call for hppa_hpux_sr_for_addr.
  82
  83 2008-02-18  Markus Deuling  <deuling@de.ibm.com>
  84
  85         * rs6000-nat.c (exec_one_dummy_insn, regmap): Add gdbarch as parameter
  86         and replace current_gdbarch by gdbarch.
  87
  88         (store_register): Update call for exec_one_dummy_insn.
  89         (fetch_register, store_register): Update call of regmap.
  90
  91         * ppcnbsd-nat.c (getregs_supplies, getfpregs_supplies): Add gdbarch as
  92         parameter and replace current_gdbarch by gdbarch.
  93
  94         (ppcnbsd_store_inferior_registers): Use get_regcache_arch to get at
  95         the current architecture. Update call for getregs_supplies and
  96         getfpregs_supplies.
  97         (ppcnbsd_fetch_inferior_registers): Likewise.
  98
  99         * ppcobsd-nat.c (getfpregs_supplies): Add gdbarch as parameter and
 100         replace current_gdbarch by gdbarch.
 101         (ppcobsd_fetch_registers, ppcobsd_store_registers): Use
 102         get_regcache_arch to get at the current architecture. Update call for
 103         getfpregs_supplies.
 104
 105 2008-02-18  Markus Deuling  <deuling@de.ibm.com>
 106
 107         * arch-utils.c (gdbarch_from_bfd): Remove unnecessary {old,new}_gdbarch
 108         variables.
 109
 110 2008-02-15  Markus Deuling  <deuling@de.ibm.com>
 111
 112         * mips-linux-tdep.c (mips_linux_init_abi): Remove internal error.
 113
 114 2008-02-14  Vladimir Prus  <vladimir@codesourcery.com>
 115
 116         * NEWS: Mention pending breakpints in MI.
 117
 118 2008-02-14  Markus Deuling  <deuling@de.ibm.com>
 119
 120         * Makefile.in (ALL_TARGET_OBS): Remove dependency to xtensa-linux-nat.o.
 121
 122 2008-02-13  Markus Deuling  <deuling@de.ibm.com>
 123
 124         Add script to build and test GDB using enable-targets=all.
 125
 126         * gdb_buildall.sh: New file.
 127
 128 2008-02-11  Maxim Grigoriev  <maxim2405@gmail.com>
 129
 130         * NEWS (New native configurations): Xtensa GNU/Linux.
 131         (New targets): Xtensa GNU/Linux.
 132         * Makefile.in (ALL_TARGET_OBS): Add xtensa-linux-nat.o and
 133         xtensa-linux-tdep.o
 134         (ALLDEPFILES): Add xtensa-linux-tdep.c and xtensa-linux-nat.c
 135         (xtensa-linux-nat.o, xtensa-linux-tdep.o): New dependencies.
 136         * configure.tgt (xtensa*-*-linux*): New entry.
 137         * xtensa-config.c (xtensa_tdep): New variable.
 138         (xtensa_config_byte_order, xtensa_config_tdep): Removed.
 139         (rmap): Change format based on new macro XTREG.
 140         (XTENSA_CONFIG_INSTANTIATE): Use new macro defined in xtensa-tdep.h.
 141         * xtensa-linux-nat.c: New.
 142         * xtensa-linux-tdep.c: New.
 143         * xtensa-xtregs.c: New.
 144         * xtensa-tdep.h (xtensa_elf_gregset_t): Update.
 145         (XTENSA_ELF_NGREG, XTREG, XTREG_END, XTENSA_GDBARCH_TDEP_INSTANTIATE)
 146         (XCHAL_NUM_CONTEXTS, XCHAL_HAVE_EXCEPTIONS): New macros.
 147         (xtensa_register_t): New field coprocessor.
 148         (XTENSA_REGISTER_FLAGS_PRIVILEGED): Name spelling corrected.
 149         * xtensa-tdep.c (xtensa_config_tdep, xtensa_config_byte_order): Removed.
 150         (xtensa_pseudo_register_read, xtensa_pseudo_register_write):
 151         Update to handle privileged registers.
 152         (xtensa_supply_gregset) Remove exccause and excvaddr registers.
 153         (xtensa_push_dummy_call): Set windowstart register correctly.
 154         (call0_analyze_prologue): Initialize xtensa_default_isa.
 155         (xtensa_derive_tdep): New.
 156         (xtensa_gdbarch_init): Get rid of xtensa_config_byte_order and
 157         xtensa_config_tdep, use XCHAL_HAVE_BE and xtensa_tdep instead.
 158         Call xtensa_derive_tdep().
 159         * config/xtensa/linux.mh: New.
 160         * regformats/reg-xtensa.dat: New.
 161
 162 2008-02-09  Aleksandar Ristovski  <aristovski@qnx.com>  (tiny change)
 163
 164         * corelow.c (core_open): Use IS_ABSOLUTE_PATH.
 165         (filenames.h): New include.
 166         * Makefile.in (corelow.o): Add dependency for filenames.h.
 167
 168 2008-02-08  Doug Evans  <dje@google.com>
 169
 170         * source.c (find_and_open_source): Always rewrite absolute filenames.
 171
 172 2008-02-07  Doug Evans  <dje@google.com>
 173
 174         * breakpoint.c: #include "hashtab.h".
 175         (ambiguous_names_p): New fn.
 176         (update_breakpoint_locations): When restoring bp enable status, don't
 177         compare function names if any functions have same name.
 178         * Makefile.in (breakpoint.o): Add hashtab.h dependency.
 179
 180 2008-02-07  Joel Brobecker  <brobecker@adacore.com>
 181
 182         * ada-lang.c (symbol_completion_add): Make SV parameter a VEC**
 183         instead of just a VEC*. Update use of SV.
 184         (ada_make_symbol_completion_list): Update symbol_completion_add calls.
 185
 186 2007-02-07  Joel Brobecker  <brobecker@adacore.com>
 187
 188         * NEWS: Put all new commands since gdb-6.7 together.
 189
 190 2007-02-07  Joel Brobecker  <brobecker@adacore.com>
 191
 192         * ada-lang.c: #include "vec.h".
 193         (struct string_vector, new_string_vector, string_vector_append):
 194         Delete.
 195         (char_ptr): New typedef.
 196         (DEF_VEC_P (char_ptr)): New VEC type.
 197         (symbol_completion_add): Update profile to take the new VEC type
 198         instead of the old string_vector structure. Update code accordingly.
 199         (ada_make_symbol_completion_list): Use the new VEC type instead of
 200         the old string_vector structure, and update the code accordingly.
 201         * Makefile.in (ada-lang.o): Add dependency on vec.h.
 202
 203 2008-02-06  Pierre Muller  <muller@ics.u-strasbg.fr>
 204
 205         * p-exp.y: Set current_type in missing places.
 206         (leftdiv_is_integer): New static variable.
 207         Typecast right operand of BINOP_DIV to long_double if both operands
 208         are integers.
 209
 210 2008-02-06  Maciej W. Rozycki  <macro@mips.com>
 211
 212         * remote-mips.c (set_breakpoint): Rename to...
 213         (mips_set_breakpoint): ... this.
 214         (clear_breakpoint): Rename to...
 215         (mips_clear_breakpoint): ... this.
 216         (common_breakpoint): Rename to...
 217         (mips_common_breakpoint): ... this.
 218         (check_lsi_error): Rename to...
 219         (mips_check_lsi_error): ... this.
 220
 221 2007-02-05  Joel Brobecker  <brobecker@adacore.com>
 222
 223         * language.h (struct language_defn): Add new field
 224         la_make_symbol_completion_list.
 225         * symtab.c (default_make_symbol_completion_list): Renames
 226         make_symbol_completion_list.
 227         (make_symbol_completion_list): New function.
 228         * symtab.h (default_make_symbol_completion_list): Add declaration.
 229         * langauge.c (unknown_language): Set la_make_symbol_completion_list.
 230         (auto_language, local_language): Likewise.
 231         * objc-lang.c (objc_language_defn): Likewise.
 232         * scm-lang.c (scm_language_defn): Likewise.
 233         * m2-lang.c (m2_language_defn): Likewise.
 234         * f-lang.c (f_language_defn): Likewise.
 235         * jv-lang.c (java_language_defn): Likewise.
 236         * p-lang.c (pascal_language_defn): Likewise.
 237         * c-lang.c (c_language_defn, cplus_language_defn, asm_language_defn)
 238         (minimal_language_defn): Likewise.
 239         * ada-lang.c (struct string_vector): New structure.
 240         (new_string_vector, string_vector_append, ada_unqualified_name)
 241         (add_angle_brackets, symbol_completion_match, symbol_completion_add)
 242         (ada_make_symbol_completion_list): New functions.
 243         (ada_language_defn): Set la_make_symbol_completion_list.
 244         * ada-lang.h (ada_make_symbol_completion_list): Remove declaration,
 245         this function is static.
 246
 247 2008-02-05  Kevin Buettner  <kevinb@redhat.com>
 248
 249         * mn10300-tdep.c (mn10300_push_dummy_call): Adjust stack pointer
 250         to account for call site optimizations.
 251
 252 2008-02-05  Andrzej Zaborowski  <balrogg@gmail.com>
 253
 254         * tracepoint.c (read_actions): Handle end-of-text indicator
 255         in action list properly.  (Committed by Jim Blandy)
 256
 257 2008-02-05  Jim Blandy  <jimb@red-bean.com>
 258
 259         * ax-gdb.c (gen_expr): Yield ordinary error if asked to trace a
 260         pseudoregister, not an internal error.
 261         Reported by: Andrzej Zaborowski
 262
 263 2008-02-04  Vladimir Prus  <vladimir@codesourcery.com>
 264
 265         * varobj.c (c_value_of_variable): Use xstrdup.
 266
 267 2008-02-04  Vladimir Prus  <vladimir@codesourcery.com>
 268
 269         Update stored rendition of varobj value when format changes.
 270         * varobj.c (varobj_set_display_format): Recomputed
 271         print_value.
 272         (c_value_of_variable): Return print_value.
 273
 274 2008-02-03  Doug Evans  <dje@google.com>
 275
 276         * eval.c (evaluate_subexp_standard): Fix type of result of mixed
 277         integer/float division operations when EVAL_AVOID_SIDE_EFFECTS.
 278         * valops.c (value_one): New function.
 279         * value.h (value_one): Declare.
 280
 281         Fix argument promotion for binary arithmetic ops for C.
 282         * valarith.c (unop_result_type): New fn.
 283         (binop_result_type): New fn.
 284         (value_binop): Move result type computation to binop_result_type.
 285         (value_pos, value_neg, value_complement): Move result type
 286         computation to unop_result_type.
 287
 288         PR 2384
 289         * gdbtypes.c (get_vptr_fieldno): Renamed from fill_in_vptr_fieldno.
 290         Return basetype, fieldno if found.  All callers updated.
 291         Don't cache TYPE_VPTR_FIELDNO, TYPE_VPTR_BASETYPE if from different
 292         objfile.
 293         * gdbtypes.h (get_vptr_fieldno): Renamed from fill_in_vptr_fieldno.
 294         * symfile.h (fill_in_vptr_fieldno): Delete.
 295
 296 2008-02-02  Doug Evans  <dje@google.com>
 297
 298         * valarith.c (value_binop): Handle unsigned BINOP_REM division by zero.
 299
 300         * typeprint.c (*): Whitespace cleanup.
 301
 302 2008-02-02  Mark Kettenis  <kettenis@gnu.org>
 303             Luis Machado  <luisgpm@br.ibm.com>
 304             Thiago Jung Bauermann  <bauerman@br.ibm.com>
 305
 306         * ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call): Pass floats that
 307         don't fit into registerson the stack the way GCC does.
 308
 309 2008-02-01  Joel Brobecker  <brobecker@adacore.com>
 310
 311         * symtab.c (symbol_set_names): Do not add an entry in the demangling
 312         hash table for Ada symbols. Just store the linkage name as is,
 313         and leave the demangled_name as NULL.
 314
 315 2007-02-01  Joel Brobecker  <brobecker@adacore.com>
 316
 317         * dwarf2read.c (add_partial_symbol): Always store all Ada subprograms
 318         in the global scope.
 319         (new_symbol): Likewise.
 320
 321 2008-02-01  Vladimir Prus  <vladimir@codesourcery.com>
 322
 323         * breakpoint.c (break_command_1): Return void.
 324         (break_command_really): Return void.  Rethrow
 325         exceptions instead of returning.
 326         (gdb_breakpoint): Remove the error_message parameter.
 327         Return void.  Rename to set_breakpoint.
 328         * gdb.h (gdb_breakpoint): Rename and move to...
 329         * breakpoint.h (set_breakpoint): ...here.
 330         * mi/mi-cmb-break.c (mi_cmd_break_insert): Restore
 331         event hooks even if exception is thrown.  Adjust to
 332         gdb_breakpoint interface changes.
 333
 334
 335 2008-02-01  Thiago Jung Bauermann  <bauerman@br.ibm.com>
 336
 337         * ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): Write 32-bit
 338         float in both first and second word in the doubleword, to support
 339         old and new ABIs.
 340
 341 2008-02-01  Vladimir Prus  <vladimir@codesourcery.com>
 342
 343         Properly rethrow exception.  This fixes errors
 344         about non-existent functions for -break-insert.
 345         * breakpoint.c (break_command_really): Use throw_exception
 346         for rethrowing.  If rethrowing, don't print the exception.
 347
 348 2008-01-31  Thiago Jung Bauermann  <bauerman@br.ibm.com>
 349
 350         * NEWS: Mention Decimal Floating Point support.
 351
 352 2008-01-31  Joel Brobecker  <brobecker@adacore.com>
 353
 354         * std-regs.c (value_of_builtin_frame_pc_reg): Change the returned
 355         value type to builtin_type_void_func_ptr.
 356
 357 2008-01-31  Andreas Krebbel  <krebbel1@de.ibm.com>
 358
 359         * s390-tdep.c (is_float_singleton, is_float_like,
 360         alignment_of, s390_return_value): Make checks for
 361         TYPE_CODE_FLT to match TYPE_CODE_DECFLOAT as well.
 362
 363 2008-01-31  Luis Machado  <luisgpm@br.ibm.com>
 364             Thiago Jung Bauermann  <bauerman@br.ibm.com>
 365
 366         * infcmd.c (default_print_registers_info): Also print hex
 367         raw contents for TYPE_CODE_DECFLOAT registers.
 368         * ppc-tdep.h (gdbarch_tdep): Add ppc_dl0_regnum member.
 369         * rs6000-tdep.c (IS_DFP_PSEUDOREG): New macro.
 370         (rs6000_register_name): Add support for DFP pseudo-registers.
 371         (rs6000_pseudo_register_type): Likewise.
 372         rs6000_pseudo_register_reggroup_p): Likewise.
 373         (ppc_pseudo_register_read): New function.
 374         (ppc_pseudo_register_write): Likewise.
 375         (rs6000_pseudo_register_read): Likewise.
 376         (rs6000_pseudo_register_write): Likewise.
 377         (e500_pseudo_register_read): Move checks to
 378         rs6000_pseudo_register_read.
 379         (e500_pseudo_register_write): Move checks to
 380         rs6000_pseudo_register_write.
 381         (rs6000_gdbarch_init): Initialize tdep->ppc_dl0_regnum.  Install
 382         rs6000_pseudo_register_read and rs6000_pseudo_register_write
 383         in gdbarch if SPE or DFP is available.  Adjust gdbarch's
 384         num_pseudo_regs to account for DFP pseudo regs.
 385
 386 2008-01-31  Thiago Jung Bauermann  <bauerman@br.ibm.com>
 387
 388         * ppc-tdep.h (struct gdbarch_tdep): Remove ppc_ev31_regnum member.
 389         * rs6000-tdep.c (IS_SPE_PSEUDOREG): New macro.
 390         (spe_register_p, rs6000_register_name, rs6000_pseudo_register_type,
 391         rs6000_pseudo_register_reggroup_p, e500_move_ev_register,
 392         e500_pseudo_register_read, e500_pseudo_register_write): Use
 393         IS_SPE_PSEUDOREG macro.
 394         (rs6000_frame_cache): Remove use of tdep->ppc_ev31_regnum.
 395         (rs6000_gdbarch_init): Remove unnecessary num_sprs local variable.
 396         Remove initialization of tdep->ppc_ev31_regnum.
 397
 398 2008-01-08  Paul Hilfinger  <hilfinger@adacore.com>
 399
 400         * printcmd.c (print_formatted): Handle references as for unformatted
 401         prints.
 402
 403 2008-01-30  Joel Brobecker  <brobecker@adacore.com>
 404
 405         * eval.c (evaluate_subexp_standard): Add handling of user
 406         registers when in EVAL_AVOID_SIDE_EFFECTS mode.
 407
 408 2008-01-30  Pierre Muller  <muller@ics.u-strasbg.fr>
 409
 410         * eval.c (evaluate_subexp_standard): Support
 411         BINOP_INTDIV opcode.
 412
 413 2008-01-30  Paul N. Hilfinger  <hilfinger@adacore.com>
 414
 415         * valarith.c (value_binop): Add floating-point BINOP_MIN and
 416         BINOP_MAX cases.
 417         For BINOP_EXP, use length and signedness of left operand only for
 418         result, as for shifts.
 419         For integral operands to BINOP_EXP, use new integer_pow and
 420         uinteger_pow functions so as to get full range of results.
 421         (integer_pow): New function.
 422         (uinteger_pow): New function.
 423
 424 2008-01-30  Vladimir Prus  <vladimir@codesourcery.com>
 425
 426         Use vector for varobj_list_children interface.
 427         * gdb/varobj.c (varobj_list_children): Return vector
 428         of varobjs.
 429         * gdb/varobj.h (varobj_list_children): Adjust
 430         prototype.
 431         (varobj_p): Declare.  Declare vector thereof.
 432         * mi/mi-cmd-var.c (mi_cmd_var_list_children): Adjust
 433         for varobj_list_children change.
 434         * Makefile.in (varobj_h): Update dependencies.
 435
 436 2008-01-30  Thiago Jung Bauermann  <bauerman@br.ibm.com>
 437
 438         * ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call): Add support for
 439         TYPE_CODE_DECFLOAT arguments.
 440         (ppc64_sysv_abi_push_dummy_call) Likewise.
 441         (get_decimal_float_return_value): New function.
 442         (do_ppc_sysv_return_value): Add support for TYPE_CODE_DECFLOAT return
 443         values by calling get_decimal_float_return_value.
 444         (ppc64_sysv_abi_return_value): Likewise.
 445
 446 2008-01-30  Nick Roberts  <nickrob@snap.net.nz>
 447
 448         * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file):  Add field
 449         for preprocessor macro information.  Formatting changes.
 450
 451 2008-01-29  Daniel Jacobowitz  <dan@codesourcery.com>
 452
 453         * remote.c (struct remote_state): Add cached_wait_status.
 454         (remote_exec_file): New variable.
 455         (PACKET_vAttach, PACKET_vRun): New constants.
 456         (extended_remote_restart): Do not query for status.
 457         (struct start_remote_args): New.
 458         (remote_start_remote): Take it as a second argument.  Check
 459         whether the target is running.  Issue an error for non-running
 460         non-extended targets.  Cache the wait status.  Set inferior_ptid
 461         here.
 462         (remote_open_1): Prompt to disconnect non-running targets.  Make
 463         sure the target is marked running.  Do not set inferior_ptid here.
 464         Update call to remote_start_remote.  Do not call remote_check_symbols
 465         if the target is not running.
 466         (remote_detach_1): Rename from remote_detach.  Take an EXTENDED
 467         argument.  Handle a non-running target.
 468         (remote_detach): Use it.
 469         (extended_remote_detach): New.
 470         (remote_disconnect): Fix typo.  Use remoute_mourn_1.
 471         (extended_remote_attach_1, extended_remote_attach)
 472         (extended_async_remote_attach): New.
 473         (remote_vcont_resume): Remove unused variable.
 474         (remote_wait, remote_async_wait): Use any cached wait status.
 475         (putpkt_binary, getpkt): Clear any cached wait status.
 476         (extended_remoute_mourn_1): New.
 477         (extended_remote_mourn): Use it.
 478         (extended_async_remote_mourn, extended_remote_run): New.
 479         (extended_remote_create_inferior_1): New.
 480         (extended_remote_create_inferior): Use it.
 481         (extended_remote_async_create_inferior): Likewise.
 482         (remote_xfer_partial): Skip for non-executing targets.
 483         (init_extended_remote_ops): Set to_detach and to_attach.
 484         (init_extended_async_remote_ops): Likewise.  Use
 485         extended_async_remote_mourn.
 486         (_initialize_remote): Register vAttach, vRun, and
 487         set remote exec-file.
 488         * NEWS: Mention vAttach, vRun, and gdbserver extended-remote support.
 489
 490 2008-01-29  Daniel Jacobowitz  <dan@codesourcery.com>
 491
 492         * Makefile.in (symfile.o): Update.
 493         * NEWS: Mention exec tracing support.
 494         * inf-ttrace.c (inf_ttrace_wait): Return TARGET_WAITKIND_EXECD for
 495         exec events.
 496         * infcmd.c (kill_if_already_running, detach_command)
 497         (disconnect_command): Replace SOLIB_RESTART with no_shared_libraries.
 498         * infrun.c (MAY_FOLLOW_EXEC, may_follow_exec): Delete.
 499         (follow_exec): Do not check may_follow_exec.  Do not mourn and push
 500         targets.  Apply the sysroot path to the loaded executable.  Use
 501         no_shared_libraries.
 502         * linux-nat.c (linux_child_follow_fork): Print fork following
 503         messages if verbose.
 504         (kill_wait_callback): Kill again before waiting a second time.
 505         * symfile.c (symbol_file_clear): Replace SOLIB_RESTART with
 506         no_shared_libraries.
 507
 508 2008-01-29  Joel Brobecker  <brobecker@adacore.com>
 509
 510         * amd64-tdep.c (amd64_classify): Add handling of TYPE_CODE_CHAR.
 511
 512 2008-01-29  Joel Brobecker  <brobecker@adacore.com>
 513
 514         * nto-tdep.h: Remove #include "defs.h".
 515         * nto-tdep.c: Add #include "defs.h".
 516         * Makefile.in (nto_tdep_h): Update dependencies.
 517         (nto-tdep.o): Likewise.
 518
 519 2008-01-29  Joel Brobecker  <brobecker@adacore.com>
 520
 521         * infrun.c (wait_for_inferior): Add treat_exec_as_sigtrap parameter
 522         and use it.
 523         (proceed, start_remote): Update call to wait_for_inferior.
 524         * inferior.h (wait_for_inferior): Update declaration.
 525         * fork-child.c, infcmd.c, solib-irix.c, solib-osf.c, solib-sunos.c,
 526         solib-svr4.c, win32-nat.c: Update calls to wait_for_inferior.
 527         * inf-ttrace.c (inf_ttrace_wait): Report TTEVT_EXEC events as
 528         TARGET_WAITKIND_EXECD instead of TARGET_WAITKIND_STOPPED.
 529
 530 2008-01-29  Aleksandar Ristovski  <aristovski@qnx.com>
 531
 532         * varobj (adjust_value_for_child_access): Added checking for
 533         returned value from gdb_value_ind.
 534         (c_describe_child): Likewise.
 535         (cplus_describe_child): Fixed a typo.
 536
 537 2008-01-29  Jim Blandy  <jimb@red-bean.com>
 538
 539         * MAINTAINERS: Update my info.
 540
 541 2008-01-29  Vladimir Prus  <vladimir@codesourcery.com>
 542
 543         Use multiple locations for hardware watchpoints.
 544         This eliminates the need to traverse value chain, doing
 545         various checks, in three different places.
 546
 547         * breakpoint.h (struct bp_location): New fields
 548         lengths and watchpoint_type.
 549         (struct breakpoint): Remove the val_chain field.
 550         * breakpoint.c (is_hardware_watchpoint): New.
 551         (free_valchain): Remove.
 552         (update_watchpoint): New.
 553         (insert_bp_location): For hardware watchpoint, just
 554         directly insert it.
 555         (insert_breakpoints): Call update_watchpoint_locations
 556         on all watchpoints.  If we have failed to insert
 557         any location of a hardware watchpoint, remove all inserted
 558         locations.
 559         (remove_breakpoint): For hardware watchpoints, directly
 560         remove location.
 561         (watchpoints_triggered): Iterate over locations.
 562         (bpstat_stop_status): Use only first location of
 563         a resource watchpoint.
 564         (delete_breakpoint): Don't call free_valchain.
 565         (print_one_breakpoint): Don't print all
 566         locations for watchpoints.
 567         (breakpoint_re_set_one): Use update_watchpoint for
 568         watchpoints.
 569
 570 2008-01-29  Vladimir Prus  <vladimir@codesourcery.com>
 571
 572         Don't reset watchpoint block on solib load.
 573
 574         * breakpoint.c (insert_bp_location): For watchpoints,
 575         recompute condition.
 576         (breakpoint_re_set_one): Instead of recomputing value
 577         and condition for watchpoints, just reset value and
 578         let insert_breakpoints/insert_bp_location recompute it.
 579         Don't do anything about disabled watchpoint.
 580
 581 2008-01-29  Pierre Muller  <muller@ics.u-strasbg.fr>
 582
 583         * valarith.c (value_binop): Handle unsigned integer
 584         division by zero.
 585
 586 2008-01-28  Kevin Buettner  <kevinb@redhat.com>
 587
 588         * mn10300-tdep.c (mn10300_analyze_prologue): Check for an
 589         instruction pattern that appears frequently in position
 590         independent code.  Fix bug in code which looks for "fmov" and
 591         backtracks if no "fmov" is found.
 592
 593 2008-01-28  Doug Evans  <dje@google.com>
 594
 595         * dbxread.c (read_dbx_symtab): Fix indentation.
 596         Reformat comments to 80 columns.
 597         Move local var def closer to only use.
 598
 599 2008-01-28  Daniel Jacobowitz  <dan@codesourcery.com>
 600
 601         * fork-child.c (SHELL_FILE): Remove #ifndef.
 602         (fork_inferior): Remove SHELL_COMMAND_CONCAT.
 603
 604 2008-01-25  Pierre Muller  <muller@ics.u-strasbg.fr>
 605
 606         * i386-tdep.c (i386_skip_noop): New function.
 607         (i386_analyze_prologue): Call i386_skip_noop function.
 608
 609 2008-01-24  Michael Snyder  <msnyder@specifix.com>
 610
 611         * procfs.c (procfs_xfer_partial): Comment, cut/paste error.
 612         * win32-nat.c (win32_xfer_partial): Ditto.
 613         * target.c (default_xfer_partial): Minor whitespace adjustment.
 614
 615 2008-01-24  Pedro Alves  <pedro@codesourcery.com>
 616
 617         * arm-tdep.c (arm_addr_bits_remove): In non 26-bit mode, don't
 618         strip bit 1 even if pc doesn't point to thumb code.
 619
 620 2008-01-23  Daniel Jacobowitz  <dan@codesourcery.com>
 621
 622         * remote.c (remote_wait): Handle SIGINT between packets.
 623         (remote_async_wait): Likewise.
 624
 625 2008-01-23  Vladimir Prus  <vladimir@codesourcery.com>
 626             Chris Demetriou  <cgd@google.com>
 627
 628         * thread.c (add_thread_silent): Renamed
 629         from add_thread.
 630         (print_thread_events): New variable definition.
 631         (show_print_thread_events): New function.
 632         (_initialize_thread): Add "set print thread-events" and
 633         "show print thread-events" commands.
 634         (add_thread): Announce new thread.
 635         * gdbthread.h (add_thread_silent): Declare.
 636         (print_thread_events): New variable declaration.
 637         * inf-ttrace.c (inf_ttrace_wait): Don't
 638         inform about new thread, as add_thread is always
 639         called too, and will take care of that.
 640         * infrun.c (handle_inferior_event): Likewise.
 641         * procfs.c (procfs_wait): Likewise.
 642         * remote.c (remote_currthread): Likewise.
 643         * sol-thread.c (sol_thread_wait): Likewise.
 644         * win32-nat.c (get_win32_debug_event): Likewise.
 645         * linux-thread-db.c (attach_thread): Likewise.
 646         Remove the verbose parameter.
 647         (check_event): Make detach_thread be verbose
 648         only if print_thread_events is set.
 649         * linux-nat.c (lin_lwp_attach_lwp): Don't inform
 650         about new thread.  This is called only from
 651         linux-thread-db.c:attach_thread, which will take care.
 652         Remove the verbose parameter.
 653         * linux-nat.h (lin_lwp_attach_lwp): Adjust prototype.
 654
 655 2008-01-23  Nick Roberts  <nickrob@snap.net.nz>
 656
 657         * mi/mi-cmd-var.c (mi_cmd_var_set_format): Add value field to output.
 658
 659 2008-01-22  Vladimir Prus  <vladimir@codesourcery.com>
 660
 661         * breakpoint.c (break_command_really): New parameter
 662         ignore_count.
 663         (break_command_1): Pass 0 as
 664         ignore_count to break_command_really.
 665         (gdb_breakpoint): Pass ignore_count to
 666         break_command_really.
 667
 668 2008-01-21  Kevin Buettner  <kevinb@redhat.com>
 669
 670         * mn10300-linux-tdep.c (am33_linux_sigframe_cache_init): Find
 671         sigcontext struct via pointer.
 672         (struct sigframe comment): Update to show new field `psc'.
 673
 674 2008-01-21  Vladimir Prus  <vladimir@codesourcery.com>
 675
 676         * infrun.c (handle_inferior_event): If
 677         we failed to remove breakpoints, error,
 678         don't try to increment PC by hand.
 679
 680 2008-01-18  Nick Hudson  <nick.hudson@dsl.pipex.com>
 681
 682         Add NetBSD/hppa target and host support.
 683
 684         * hppabsd-tdep.c (hppabsd_supply_gregset): Move to ...
 685         (hppabsd_gregset): Move to ...
 686         (hppabsd_regset_from_core_section): Rename
 687         hppaobsd_regset_from_core_section and move to ...
 688         (hppabsd_find_global_pointer): Update comment.
 689         (hppabsd_init_abi): Make global. Do not register
 690         hppabsd_regset_from_core_section.
 691         (hppabsd_core_osabi_sniffer): Rename hppaobsd_core_osabi_sniffer and
 692         move to ...
 693         (_initialize_hppabsd_tdep): Move to ...
 694         * hppaobsd-tdep.c: ... here. New file.
 695         * hppnbsd-tdep.c: New file.
 696         * hppnbsd-nat.c: New file.
 697         * Makefile.in (ALL_TARGET_OBS): Add hppanbsd-tdep.o and hppaobsd-tdep.o.
 698         (ALLDEPFILES): Add hppabsd-nat.c and hppabsd-tdep.c.
 699         (hppabsd-nat.o, hppabsd-tdep.o): New dependencies.
 700         (hppabsd-tdep.o, hppaobsd-tdep.o): Update dependencies.
 701         * configure.host (hppa*-*-netbsd*): New entry.
 702         * configure.tgt (hppa*-*-netbsd*): New entry.
 703         (hppa*-*-openbsd*): Update.
 704         * NEWS (New native configuration): Mention NetBSD/hppa.
 705         (New targets): Mention NetBSD/hppa.
 706
 707 2008-01-18  Markus Deuling  <deuling@de.ibm.com>
 708
 709         * gdbarch.sh (function_list): Add new property bits_big_endian to
 710         gdbarch structure.
 711         * gdbarch.{c,h}: Regenerate.
 712
 713         * value.c (struct value): Replace BITS_BIG_ENDIAN by
 714         gdbarch_bits_big_endian (comment).
 715         (unpack_field_as_long, modify_field): Likewise.
 716         * value.h: Likewise (comment).
 717         * valops.c (value_slice): Likewise.
 718         * valarith.c (value_subscript, value_bit_index): Likewise.
 719         * gdbtypes.h (field): Likewise (comment).
 720         * eval.c (evaluate_subexp_standard): Likewise.
 721         * dwarf2read.c (dwarf2_add_field): Likewise.
 722         * ada-lang.c (decode_packed_array, ada_value_primitive_packed_val)
 723         (move_bits, ada_value_assign, value_assign_to_component): Likewise.
 724
 725         * defs.h (BITS_BIG_ENDIAN): Remove.
 726
 727 2008-01-18  Markus Deuling  <deuling@de.ibm.com>
 728
 729         * jv-exp.y (yylex): Replace DEPRECATED_STREQN with the appropriate
 730         function calls.
 731         * m2-exp.y (yylex): Likewise.
 732         * objc-exp.y (yylex): Likewise.
 733
 734         * defs.h (DEPRECATED_STREQN): Remove.
 735
 736 2008-01-17  H.J. Lu  <hjl.tools@gmail.com>
 737
 738         * MAINTAINERS: Update my email address.
 739
 740 2008-01-17  Jim Blandy  <jimb@codesourcery.com>
 741
 742         * README: Mention gdbserver/README.
 743
 744 2008-01-17  Pierre Muller  <muller@ics.u-strasbg.fr>
 745
 746         * valarith.c (value_binop): Handle BINOP_INTDIV
 747         for unsigned and signed integers.
 748
 749 2008-01-17  Ulrich Weigand  <uweigand@de.ibm.com>
 750
 751         * s390-tdep.c (s390_gdbarch_init): Set default long double
 752         type to 128-bit IEEE quad.
 753
 754 2008-01-17  Joel Brobecker  <brobecker@adacore.com>
 755
 756         * hpux-thread.c (hpux_thread_resume): Delete commented-out code.
 757
 758 2008-01-16  Mark Kettenis  <kettenis@gnu.org>
 759
 760         * auxv.c (fprint_target_auxv): Add support for AT_SUN_AUXFLAGS.
 761
 762         * dfp.c, dfp.h: Rename decimal_to_double to decimal_to_doublest.
 763         * value.c: All callers changed.
 764
 765 2008-01-16  Markus Deuling  <deuling@de.ibm.com>
 766
 767         * rs6000-nat.c (add_vmap, vmap_ldinfo, vmap_exec): Replace
 768         DEPRECATED_STREQ by its expression.
 769         * coffread.c (coff_locate_sections, coff_symtab_read): Likewise.
 770         * xcoffread.c (read_xcoff_symtab, read_symbol_lineno, find_linenos)
 771         (scan_xcoff_symtab): Likewise.
 772         * hppa-hpux-tdep.c (hppa_hpux_skip_trampoline_code): Likewise.
 773         * f-lang.c (find_common_for_function): Likewise.
 774         * objc-exp.y (parse_number): Likewise.
 775
 776         * defs.h (DEPRECATED_STREQ): Remove.
 777
 778 2008-01-16  Markus Deuling  <deuling@de.ibm.com>
 779
 780         * mn10300-tdep.h (AM33_MODE): Add gdbarch as parameter.
 781         * mn10300-tdep.c (set_reg_offsets, mn10300_analyze_prologue): Use
 782         get_frame_arch to get at the current_architecture. Update AM33_MODE
 783         call.
 784         (mn10300_analyze_prologue): Add gdbarch as parameter. Update caller.
 785         (mn10300_frame_unwind_cache): Use get_frame_arch to get at the current
 786         architecture.
 787         (set_reg_offsets, mn10300_analyze_prologue): Fix indentation.
 788
 789 2008-01-16  Markus Deuling  <deuling@de.ibm.com>
 790
 791         * amd64-nat.h (amd64_native_gregset_supplies_p): Add gdbarch as
 792         parameter.
 793         * amd64-nat.c (amd64_native_gregset_supplies_p): Likewise.
 794
 795         (amd64_native_gregset_reg_offset): Add gdbarch as parameter. Replace
 796         current_gdbarch by gdbarch. Update caller.
 797
 798         * amd64-linux-nat.c (amd64_linux_fetch_inferior_registers)
 799         (amd64_linux_store_inferior_registers): Use get_regcache_arch to get at
 800         the current architecture. Update calls of
 801         amd64_native_gregset_supplies_p.
 802         * amd64bsd-nat.c (amd64bsd_fetch_inferior_registers)
 803         (amd64bsd_store_inferior_registers): Likewise.
 804
 805 2008-01-16  Markus Deuling  <deuling@de.ibm.com>
 806
 807         * ppc-linux-nat.c (ppc_register_u_addr): Add gdbarch as parameter.
 808         Replace current_gdbarch by gdbarch. Update caller.
 809
 810 2008-01-16  Markus Deuling  <deuling@de.ibm.com>
 811
 812         * dbxread.c (repeated_header_complaint, dbx_symfile_init)
 813         (read_dbx_dynamic_symtab, function_outside_compilation_unit_complaint)
 814         (read_dbx_symtab, end_psymtab, dbx_psymtab_to_symtab_1)
 815         (dbx_psymtab_to_symtab, read_ofile_symtab, process_one_symbol)
 816         (stabsect_build_psymtabs): Fix indentation.
 817
 818 2008-01-15  Michael Snyder  <msnyder@specifix.com>
 819
 820         * corelow.c (core_xfer_partial): Comment, cut/paste error.
 821
 822 2008-01-14  Pierre Muller  <muller@ics.u-strasbg.fr>
 823
 824         * win32-nat.c (win32_create_inferior): Restore code calling
 825         CloseHandle on ProcessInformation structure.
 826
 827 2008-01-13  Nick Hudson  <nick.hudson@dsl.pipex.com>
 828
 829         * configure.ac: Check for void * as 3 argument of ptrace.
 830         * configure: regenerate.
 831
 832 2008-01-11  Markus Deuling  <deuling@de.ibm.com>
 833
 834         * alpha-tdep.c (alpha_heuristic_proc_start)
 835         (alpha_sigtramp_register_address): Add gdbarch as parameter. Replace
 836         current_gdbarch by gdbarch.
 837
 838         (alpha_heuristic_frame_unwind_cache): Use get_frame_arch to get at the
 839         current architecture by frame_info. Update alpha_heuristic_proc_start
 840         call.
 841
 842         (alpha_sigtramp_frame_this_id, alpha_sigtramp_frame_prev_register): Use
 843         get_frame_arch to get at the current architecture by frame_info. Update
 844         alpha_sigtramp_register_address call.
 845
 846         * arm-tdep.c (thumb_scan_prologue): Add gdbarch as parameter and replace
 847         current_gdbarch by gdbarch. Update caller.
 848         (convert_to_extended, convert_from_extended): Add endianess parameter
 849         for comparison. Update caller.
 850         (arm_extract_return_value, arm_store_return_value): Use
 851         get_regcache_arch to get at the current architecture.
 852
 853         * cris-tdep.c (cris_register_size): Add gdbarch as parameter. Replace
 854         current_gdbarch by gdbarch. Update caller.
 855         (cris_gdb_func, move_to_preg_op, none_reg_mode_move_from_preg_op): Add
 856         gdbarch as parameter. Update caller. Replace current_gdbarch by gdbarch.
 857
 858         * h8300-tdep.c (E_PSEUDO_CCR_REGNUM, E_PSEUDO_EXR_REGNUM, BINWORD): Add
 859         gdbarch as parameter. Update caller.
 860         (h8300_init_frame_cache): Add gdbarch as parameter. Replace
 861         current_gdbarch by gdbarch. Update caller.
 862
 863         * hppa-tdep.c (skip_prologue_hard_way): Add gdbarch as parameter and
 864         update caller. Replace current_gdbarch by gdbarch.
 865
 866         * m32c-tdep.c (m32c_skip_trampoline_code): Use get_frame_arch to get at
 867         the current architecture. Replace current_gdbarch by gdbarch.
 868         * m68hc11-tdep.c (m68hc11_frame_unwind_cache): Likewise.
 869         (STACK_CORRECTION, USE_PAGE_REGISTER): Replace M6811_TDEP by its
 870         expression. Add gdbarch as parameter and replace current_gdbarch with
 871         it. Update caller.
 872         (M6811_TDEP): Remove.
 873         (m68hc11_frame_prev_register): Use get_frame_arch to get at the current
 874         architecture.
 875         (m68hc11_scan_prologue): Add gdbarch as parameter. Replace
 876         current_gdbarch by gdbarch. Update caller.
 877
 878         * m68k-tdep.c (m68k_analyze_prologue): Add gdbarch as parameter and
 879         update caller.
 880         (m68k_analyze_register_saves): Likewise. Also replace current_gdbarch
 881         by gdbarch.
 882
 883         * rs6000-tdep.c (skip_prologue): Add gdbarch as parameter and update
 884         caller. Relace current_gdbarch by gdbarch.
 885         (altivec_register_p, spe_register_p): Likewise.
 886         * ppc-tdep.h (altivec_register_p, spe_register_p): Add gdbarch as
 887         parameter.
 888         * ppc-linux-nat.c (fetch_register, store_register): Update caller of
 889         altivec_register_p and spe_register_p.
 890
 891         * score-tdep.c (score_fetch_inst): Add gdbarch as parameter. Update
 892         caller. Replace current_gdbarch by gdbarch.
 893         (score_analyze_prologue): use get_frame_arch to get at the current
 894         architecture.
 895
 896         * sparc-tdep.h (sparc_analyze_prologue): Add gdbarch as parameter.
 897         * sparc-tdep.c (sparc_analyze_prologue): Likewise. Replace
 898         current_gdbarch by gdbarch. Update caller.
 899         (sparc_frame_cache): Use get_frame_arch to get at the current
 900         architecture.
 901         * sparce64-tdep.c (sparc64_skip_prologue): Update call of
 902         sparc_analyze_prologue.
 903
 904         * mn10300-tdep.c (mn10300_dwarf2_reg_to_regnum): Add gdbarch as
 905         parameter.
 906
 907 2008-01-11  Markus Deuling  <deuling@de.ibm.com>
 908
 909         * exec.c: #include "arch-utils.h"
 910          (print_section_info): Use gdbarch_from_bfd to get at the
 911         current architecture. Replace current_gdbarch. Fix indention. Replace
 912         deprecated_print_address_numeric by paddress.
 913         * Makefile.in (exec.o) Add dependency to arch-utils.h.
 914
 915         * valprint.c (val_print_string): Replace
 916         deprecated_print_address_numeric.
 917         * tracepoint.c (trace_mention, scope_info): Likewise.
 918         * symmisc.c (dump_msymbols, dump_psymtab, dump_symtab_1, print_symbol)
 919         (print_symbol, print_partial_symbols, maintenance_info_psymtabs)
 920         (maintenance_check_symtabs): Likewise.
 921         * symfile.c (list_overlays_command): Likewise.
 922         * stack.c (frame_info, print_block_frame_labels): Likewise.
 923         * printcmd.c (print_address, print_address_demangle)
 924         (address_info): Likewise.
 925         * corefile.c (memory_error): Likewise.
 926         * infcmd.c (jump_command): Likewise.
 927         * breakpoint.c (insert_bp_location, describe_other_breakpoints)
 928         (mention, delete_breakpoint): Likewise.
 929         * c-valprint.c (print_function_pointer_address, c_val_print): Likewise.
 930         * dwarf2read.c (dump_die): Likewise.
 931         * ada-valprint.c (ada_val_print_1): Likewise.
 932         * f-valprint.c (f_val_print): Likewise.
 933         * linux-fork.c (info_forks_command): Likewise.
 934         * m32r-com.c (m32r_load_section, m32r_load)
 935         (m32r_upload_command): Likewise.
 936
 937         * ui-out.c (ui_out_field_core_addr): Remove unnecessary comment.
 938
 939 2008-01-11  Markus Deuling  <deuling@de.ibm.com>
 940
 941         * gdbarch.sh (skip_prologue): Add gdbarch
 942         as parameter.
 943         * gdbarch.{c,h}: Regenerate.
 944
 945         * alpha-tdep.c (alpha_skip_prologue): Add gdbarch as parameter.
 946         * amd64-tdep.c (amd64_skip_prologue): Likewise.
 947         * avr-tdep.c (avr_skip_prologue): Likewise.
 948         * cris-tdep.c (cris_skip_prologue): Likewise.
 949         * frv-tdep.c (frv_skip_prologue): Likewise.
 950         * h8300-tdep.c (h8300_skip_prologue): Likewise.
 951         * hppa-tdep.c (hppa_skip_prologue): Likewise.
 952         * i386-tdep.c (i386_skip_prologue): Likewise.
 953         * ia64-tdep.c (ia64_skip_prologue): Likewise.
 954         * iq2000-tdep.c (iq2000_skip_prologue): Likewise.
 955         * m32r-tdep.c (m32r_skip_prologue): Likewise.
 956         * m68hc11-tdep.c (m68hc11_skip_prologue): Likewise.
 957         * m68k-tdep.c (m68k_skip_prologue): Likewise.
 958         * m88k-tdep.c (m88k_skip_prologue): Likewise.
 959         * mep-tdep.c (mep_skip_prologue): Likewise.
 960         * mips-tdep.c (mips_skip_prologue): Likewise.
 961         * mn10300-tdep.c (mn10300_skip_prologue): Likewise.
 962         * mt-tdep.c (mt_skip_prologue): Likewise.
 963         * rs6000-tdep.c (rs6000_skip_prologue): Likewise.
 964         * score-tdep.c (score_skip_prologue): Likewise.
 965         * sh64-tdep.c (sh64_skip_prologue): Likewise.
 966         * sh-tdep.c (sh_skip_prologue): Likewise.
 967         * sparc64-tdep.c (sparc64_skip_prologue): Likewise.
 968         * sparc-tdep.c (sparc32_skip_prologue): Likewise.
 969         * spu-tdep.c (spu_skip_prologue): Likewise.
 970         * v850-tdep.c (v850_skip_prologue): Likewise.
 971         * vax-tdep.c (vax_skip_prologue): Likewise.
 972         * xstormy16-tdep.c (xstormy16_skip_prologue): Likewise.
 973         * xtensa-tdep.c (xtensa_skip_prologue): Likewise.
 974
 975         * arm-tdep.c (arm_skip_prologue): Add gdbarch as parameter. Replace
 976         current_gdbarch by gdbarch.
 977         * m32c-tdep.c (m32c_skip_prologue): Likewise.
 978         * s390-tdep.c (s390_skip_prologue): Likewise.
 979
 980 2008-01-10  Doug Evans  <dje@google.com>
 981
 982         * defs.h (struct continuation_arg): Fix typo in comment.
 983         * target.c (target_translate_tls_address): Fix comment spelling error.
 984
 985 2008-01-09  Thiago Jung Bauermann  <bauerman@br.ibm.com>
 986
 987         * doublest.h (DOUBLEST_PRINT_FORMAT): Remove % from string.
 988         (DOUBLEST_SCAN_FORMAT): Likewise.
 989         * dfp.c (decimal_from_floating): Use DOUBLEST_PRINT_FORMAT.
 990         * ada-lex.l (processReal): Prepend "%" to use of DOUBLEST_SCAN_FORMAT.
 991         * c-exp.y (parse_number): Likewise.
 992         * jv-exp.y (parse_number): Likewise.
 993         * objc-exp.y (parse_number): Likewise.
 994         * p-exp.y (parse_number): Likewise.
 995
 996 2008-01-09  Joel Brobecker  <brobecker@adacore.com>
 997
 998         * gdbtypes.c (create_array_type): Add handling of null Ada arrays.
 999         (check_typedef): Likewise.
1000
1001 2008-01-09  Luis Machado  <luisgpm@br.ibm.com>
1002
1003         * printcmd.c (printf_command): Add seen_big_h, seen_big_d and
1004         seen_double_big_d, treat the new H, D, and DD modifiers as length
1005         modifiers.
1006
1007 2008-01-08  Joel Brobecker  <brobecker@adacore.com>
1008
1009         * dwarf2read.c (read_enumeration_type): Add comment.
1010
1011 2008-01-08  Thiago Jung Bauermann  <bauerman@br.ibm.com>
1012
1013         * config.in: Regenerate.
1014
1015 2008-01-08  Joel Brobecker  <brobecker@adacore.com>
1016
1017         * ada-lang.c (ada_convert_actual): Renames convert_actual.
1018         Make non-static.
1019         (ada_convert_actuals): Delete.
1020         * ada-lang.h (ada_convert_actual): Add declaration.
1021         (ada_convert_actuals): Remove declaration.
1022         * infcall.c: #include "ada-lang.h".
1023         (value_arg_coerce): Add new parameter sp.  Update function
1024         documetnation.  Add handling of Ada function call parameters.
1025         * Makefile.in (infcall.o): Update dependencies.
1026
1027 2008-01-08  Paul Hilfinger  <hilfinger@adacore.com>
1028
1029         * ada-lang.c (ensure_lval): Fix value lval kind.
1030         (convert_actual): Add handling for arguments passed by reference.
1031
1032 2008-01-08  Doug Evans  <dje@google.com>
1033
1034         * dbxread.c (read_dbx_symtab): Fix indentation.
1035
1036 2008-01-07  Thiago Jung Bauermann  <bauerman@br.ibm.com>
1037
1038         * Makefile.in (dfp.o): Depend on expression.h, gdbtypes.h and value.h.
1039         (valarith.o): Depend on dfp.h.
1040         (valops.o): Likewise.
1041         * dfp.c: Include expression.h, gdbtypes.h, value.h and dfp.h.
1042         (set_decnumber_context): New function.
1043         (decimal_check_errors): Likewise.
1044         (decimal_from_number): Likewise.
1045         (decimal_to_number): Likewise.
1046         (decimal_from_string): Use set_decnumber_context and
1047         decimal_check_errors.
1048         (decimal_from_integral): New function.
1049         (decimal_from_floating): Likewise.
1050         (decimal_to_double): Likewise.
1051         (promote_decimal): Likewise.
1052         (decimal_binop): Likewise.
1053         (decimal_is_zero): Likewise.
1054         (decimal_compare): Likewise.
1055         (decimal_convert): Likewise.
1056         * dfp.h (decimal_from_integral): New prototype.
1057         (decimal_from_floating): Likewise.
1058         (decimal_to_double): Likewise.
1059         (decimal_binop): Likewise.
1060         (decimal_is_zero): Likewise.
1061         (decimal_compare): Likewise.
1062         (decimal_convert): Likewise.
1063         * eval.c (evaluate_subexp_standard): Remove expect_type argument from
1064         call to value_from_decfloat.
1065         * valarith.c: Include dfp.h.
1066         (value_args_as_decimal): New function.
1067         (value_binop): Add if block to handle TYPE_CODE_DECFLOAT values.
1068         (value_logical_not): Likewise.
1069         (value_equal): Likewise.
1070         (value_less): Likewise.
1071         (value_pos): Likewise.
1072         (value_neg): Formatting fix.
1073         * valops.c: Include dfp.h.
1074         (value_cast): Add if block to handle TYPE_CODE_DECFLOAT values.
1075         * value.c (unpack_long): Add case to handle TYPE_CODE_DECFLOAT.
1076         (unpack_double): Add if block to handle TYPE_CODE_DECFLOAT.
1077         (value_from_decfloat): Remove expect_type argument.
1078         * value.h (value_from_decfloat): Update prototype.
1079
1080 2008-01-07  Vladimir Prus  <vladimir@codesourcery.com>
1081
1082         Ignore change in name of dynamic linker during
1083         execution on Solaris.  This also unbreaks pending breakpoints.
1084
1085         * solist.h (struct target_so_ops): New field same.
1086         * solib-svr4.c (svr4_same): New.
1087         (_initialize_svr4_solib): Register svr4_same.
1088         * solib.c (update_solib_list): Use ops->same, if available.
1089
1090 2008-01-06  Christopher Faylor  <me+cygwin@cgf.cx>
1091
1092         * win32-nat.c (win32_make_so): Use cygwin-style path to avoid warnings
1093         when using MS-DOS paths.
1094
1095 2008-01-05  Pedro Alves  <pedro@codesourcery.com>
1096
1097         * NEWS: Mention --pid and --core command line behaviour changes.
1098
1099 2008-01-05  Pedro Alves  <pedro@codesourcery.com>
1100
1101         * main.c (captured_main): Remove 'count' varible and the
1102         ALIGN_STACK_ON_ENTRY block that used it.  Error out if --core and
1103         --pid options were issued simultaneously.  If an explicit pid
1104         option was passed, don't fallback to core file.  Detect extra
1105         arguments better in the presence of explicit pid or core
1106         arguments.
1107
1108 2008-01-05  Joel Brobecker  <brobecker@adacore.com>
1109
1110         * ada-lang.c (ada_which_variant_applies): Correctly compute
1111         the value of the discriminant when the variant record is packed.
1112
1113 2008-01-04  Joel Brobecker  <brobecker@adacore.com>
1114
1115         * ada-lang.c (is_name_suffix): Handle middle-name numeric suffixes
1116         that are used to differentiate homonyms.
1117
1118 2008-01-04  Jerome Guitton  <guitton@adacore.com>
1119
1120         * ada-lang.c (decode_packed_array_type): Avoid a seg fault
1121         when the type is an anonymous pointer type.
1122         (ada_check_typedef): Avoid a seg fault when the type is null.
1123         * ada-typeprint.c (print_array_type): Add support for pointer
1124         to packed arrays.
1125
1126 2008-01-04  Paul N. Hilfinger  <hilfinger@adacore.com>
1127
1128         * ada-exp.y: Allow '{type} ADDRESS' notation on left of assignment.
1129
1130 2008-01-04  Joel Brobecker  <brobecker@adacore.com>
1131
1132         * ada-lang.c (ada_evaluate_subexp): Evaluate tagged types in
1133         EVAL_NORMAL mode when noside is EVAL_AVOID_SIDE_EFFECTS.
1134
1135 2008-01-04  Joel Brobecker  <brobecker@adacore.com>
1136
1137         * ada-exp.y (chop_separator): New function.
1138         (write_selectors): Rewrite to re-use chop_separator.
1139         (ada_nget_field_index, get_symbol_field_type): New functions.
1140         (write_var_or_type): Add support for "ptype TYPENAME.FIELD"
1141         expressions.
1142
1143 2008-01-03  Thiago Jung Bauermann  <bauerman@br.ibm.com>
1144
1145         * symtab.c (find_pc_sect_line): Use SYMBOL_VALUE_ADDRESS instead
1146         of SYMBOL_VALUE when working with function symbols.
1147
1148 2008-01-03  Joel Brobecker  <brobecker@adacore.com>
1149
1150         * ada-lang.c (resolve_subexp): Add handling of OP_REGISTER
1151         expressions.  These expressions do not need to be rewriten.
1152
1153 2008-01-03  Joel Brobecker  <brobecker@adacore.com>
1154
1155         * dwarf2read.c (read_enumeration_type): Flag type as stub if
1156         the given die is a declaration.
1157
1158 2008-01-03  Joel Brobecker  <brobecker@adacore.com>
1159
1160         * ada-lang.c (ada_array_bound_from_type): Make non-static.
1161         Handle properly the case when the index type is an enumerated type.
1162         Do not return the subtype of the bounds type, just return the
1163         bounds type directly - this is not needed and is more consistent
1164         with what we do for arrays when no XA parallel type exists.
1165
1166 2008-01-03  Joel Brobecker  <brobecker@adacore.com>
1167
1168         * ada-lang.c (static_unwrap_type): Add forward declaration.
1169         (template_to_static_fixed_type): Fields of dynamic types sometimes
1170         also need to be unwrapped. Take this into account.
1171         (ada_to_fixed_type_1): Renamed from ada_to_fixed_type.
1172         (ada_to_fixed_type): New wrapper around ada_to_fixed_type_1.
1173         * ada-typeprint.c (ada_print_type): Get the typename from
1174         the original type, not the base type.
1175
1176 2008-01-03  Jerome Guitton  <guitton@adacore.com>
1177
1178         * ada-lang.c (ada_value_struct_elt, to_fixed_array_type)
1179         (to_fixed_array_type, ada_to_fixed_value_create, unwrap_value):
1180         Update calls to ada_to_fixed_type.
1181         (ada_template_to_fixed_record_type_1): Ditto, but without looking
1182         for the tag.
1183         (ada_to_fixed_type): Add check_tag parameter; do not look for
1184         tag if null.  When looking for a tag, use a fixed record type.
1185         * ada-lang.h (ada_to_fixed_type): Add check_tag parameter.
1186         * ada-valprint.c (printable_val_type, ada_value_print): Update
1187         calls to ada_to_fixed_type.
1188
1189 2008-01-03  Luis Machado  <luisgpm@br.ibm.com>
1190
1191         * doublest.c (convert_floatformat_to_doublest): Call
1192         floatformat_to_doublest instead of floatformat_to_double and use
1193         DOUBLEST variables.
1194         (convert_doublest_to_floatformat): Call floatformat_from_doublest
1195         instead of floatformat_from_double and use DOUBLEST variables.
1196
1197 2008-01-03  Nick Hudson  <nick.hudson@dsl.pipex.com>
1198
1199         * MAINTAINERS (Write After Approval): Add self.
1200
1201 2008-01-03  Joel Brobecker  <brobecker@adacore.com>
1202
1203         * symfile.c (set_initial_language): Make non-static.
1204         * symfile.h (set_initial_language): Add declaration.
1205         * language.c: #include "symfile.h".
1206         (set_language): Call set_initial_language if the frame language
1207         could not be determined.
1208
1209 2008-01-03  Paul N. Hilfinger  <hilfinger@adacore.com>
1210
1211         * eval.c (evaluate_subexp_for_address): Provide frame address to
1212         locate_var_value only if it will be needed.
1213
1214 2008-01-02  Jan Kratochvil  <jan.kratochvil@redhat.com>
1215
1216         * linux-nat.c (linux_child_follow_fork): Call also CHECK_FOR_THREAD_DB.
1217
1218 2008-01-02  Joel Brobecker  <brobecker@adacore.com>
1219
1220         * ada-lang.c (ada_evaluate_subexp): Modify the value returned
1221         when noside is EVAL_AVOID_SIDE_EFFECTS to be an lval_memory.
1222         This is needed to make sure that any other treatment applied
1223         to the resulting value does not fail for spurious reason,
1224         such as trying to take the address of this value.
1225
1226 2008-01-02  Joel Brobecker  <brobecker@adacore.com>
1227
1228         * ada-lang.c (ada_value_equal): Dereference reference types when
1229         comparing arrays.
1230
1231 2008-01-01  Daniel Jacobowitz  <dan@codesourcery.com>
1232
1233         Updated copyright notices for most files.
1234
1235 2008-01-01  Christopher Faylor  <me+gdb@cgf.cx>
1236
1237         * win32-nat.c (psapi_module_handle): Remove static.
1238         (get_module_name): Rename from psapi_get_dll_name.  Revamp slightly to
1239         return first module found if base_address is zero.  Don't initialize
1240         psapi function pointers here.  Convert to cygwin paths when
1241         appropriate.
1242         (win32_pid_to_exec_file): Use Cygwin's /proc interface to determine
1243         executable name.  Use get_module_name when that fails or when
1244         !__CYGWIN__.
1245         (_initialize_psapi): New function.  Initialize psapi stuff before it is
1246         needed or issue a warning if it is not found.  Move psapi_module_handle
1247         here.
1248
1249 2008-01-01  Joel Brobecker  <brobecker@adacore.com>
1250
1251         * ada-lang.c (ada_remove_trailing_digits): New function.
1252         (ada_remove_po_subprogram_suffix): New function.
1253         (ada_decode): Improve. Move the description of the algorithm
1254         directly inside the code, instead of in the function global
1255         description.
1256
1257 2008-01-01  Joel Brobecker  <brobecker@adacore.com>
1258
1259         * ada-valprint.c (ada_val_print_1) [TYPE_CODE_REF]: Ignore deref_ref
1260         and always print the dereferenced value.
1261
1262 2008-01-01  Joel Brobecker  <brobecker@adacore.com>
1263
1264         * ada-lang.c (ada_evaluate_subexp, case BINOP_SUB): Add handling
1265         of the case where the first argument is a reference.
1266         (ada_evaluate_subexp, case BINOP_ADD): Likewise.
1267
1268 2008-01-01  Joel Brobecker  <brobecker@adacore.com>
1269
1270         Implement support for Ada interface types.
1271
1272         * ada-lang.c (ada_is_dispatch_table_ptr_type): New function.
1273         (ada_is_ignored_field): Ignore fields that are a dispatch table
1274         of a tagged type.
1275
1276 2008-01-01  Joel Brobecker  <brobecker@adacore.com>
1277
1278         * top.c (print_gdb_version): Update copyright year.
1279
1280 2008-01-01  Joel Brobecker  <brobecker@adacore.com>
1281
1282         * ChangeLog-2007: New ChangeLog rotation.
1283         * ChangeLog: Reset for 2008.
1284         * config/djgpp/fnchange.lst: Add entries for ChangeLog-2006 and
1285         ChangeLog-2007.
1286
1287 For older changes see ChangeLog-2007.
1288 \f
1289 Local Variables:
1290 mode: change-log
1291 left-margin: 8
1292 fill-column: 74
1293 version-control: never
1294 coding: utf-8
1295 End: