1 2009-09-10 Anthony Green <green@moxielogic.com>
3 * moxie-tdep.c (moxie_analyze_prologue): Recognize new prologue
6 2009-09-10 Michael Snyder <msnyder@vmware.com>
8 * remote.c (PACKET_bc, PACKET_bs): New enums.
9 (remote_protocol_features): Add ReverseStep, ReverseContinue.
10 (remote_resume): Check for reverse capability.
11 (_initialize_remote): Add packet config for "bs" and "bc" packets.
12 * NEWS (new options): Mention set/show for "bs" and "bc" packets.
14 2009-09-10 Joel Brobecker <brobecker@adacore.com>
16 * top.c (interactive_mode): New static variable.
17 (show_interactive_mode): New function.
18 (input_from_terminal_p): If interactive_mode is not auto, then
19 use that rather than checking the stdin settings.
20 (init_main): Add "set/show interactive-mode" command.
21 * NEWS: Add entry for new "set/show interactive-mode" command.
23 2009-09-10 Joel Brobecker <brobecker@adacore.com>
25 * configure.ac: Fix the names of the python source and object files
26 following the renaming done in an earlier change.
27 * configure: Regenerate.
29 2009-09-08 Joel Brobecker <brobecker@adacore.com>
31 Fix a build failure on AIX.
32 * rs6000-nat.c (vmap_exec): Rewrite using target_get_section_table
33 instead of relying on the to_sections/to_section_end target_ops
34 field, since the latter have been removed in a previous patch.
36 2009-09-08 Thiago Jung Bauermann <thiago.bauermann@gmail.com>
38 * Makefile.in (py-cmd.o): Renamed from python-cmd.o. Updated
40 (py-frame.o): Renamed from python-frame.o. Updated references.
41 (py-function.o): Renamed from python-function.o. Updated references.
42 (py-objfile.o): Renamed from python-objfile.o. Updated references.
43 (py-prettyprint.o): Renamed from python-prettyprint.o. Updated
45 (py-type.o): Renamed from python-type.o. Updated references.
46 (py-utils.o): Renamed from python-utils.o. Updated references.
47 (py-value.o): Renamed from python-value.o. Updated references.
48 * py-cmd.c: Renamed from python-cmd.c.
49 * py-frame.c: Renamed from python-frame.c.
50 * py-function.c: Renamed from python-function.c.
51 * py-objfile.c: Renamed from python-objfile.c.
52 * py-prettyprint.c: Renamed from python-prettyprint.c.
53 * py-type.c: Renamed from python-type.c.
54 * py-utils.c: Renamed from python-utils.c.
55 * py-value.c: Renamed from python-value.c.
57 2009-09-08 Joel Brobecker <brobecker@adacore.com>
59 Avoid quadratic behavior when computing the value of a register.
60 * frame.c (frame_stash): New static constant.
61 (frame_stash_add, frame_stash_find, frame_stash_invalidate):
63 (get_frame_id): Minor reformatting. Add the frame to the frame stash.
64 (frame_find_by_id): Search the frame stash first before walking all
65 frames starting from te current_frame.
66 (reinit_frame_stash): Add call to frame_stash_invalidate ();
68 2009-09-08 Joel Brobecker <brobecker@adacore.com>
70 * block.c (contained_in): Return zero for nested functions.
71 * blockframe.c (block_innermost_frame): Delete unreferenced local
74 2009-09-08 Doug Evans <dje@google.com>
76 * target.c (initialize_targets): Fix thinko in stack_cache_enabled_p.
78 2009-09-08 Michael Snyder <msnyder@vmware.com>
80 * amd64-linux-tdep.h (enum amd64_syscall): New enum consts,
81 to replace literal consts used in amd64-linux-tdep.c
82 * linux-record.h (enum gdb_syscall): New enum consts, to replace
83 literal consts used in amd64-linux-tdep.c and linux-record.c.
84 * amd64-linux-tdep.c (amd64_canonicalize_syscall): New function,
85 translate from native amd64 Linux syscall id to internal gdb id.
86 (amd64_linux_syscall_record): Switch statement abstracted out
87 and replaced with a call to amd64_canonicalize_syscall.
88 * linux-record.c (record_linux_system_call): Replace literal
89 consts with enum consts.
90 * i386-linux-tdep.c (i386_canonicalize_syscall): New function,
91 trivially translate from native i386 Linux syscalls to gdb syscalls.
92 (i386_linux_intx80_sysenter_record):
94 2009-09-08 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
96 * gdb/Makefile.in (check//%): Parse 'config.status --version'
97 output to recreate the configuration from the testsuite directory,
98 rather than running 'config.status --recheck' from a different
99 build directory. Let configure do the recursion rather than
102 2009-09-08 Jan Kratochvil <jan.kratochvil@redhat.com>
104 * ia64-tdep.c (ia64_memory_remove_breakpoint): Call do_cleanups
107 2009-09-08 Jan Kratochvil <jan.kratochvil@redhat.com>
109 * ia64-tdep.c (ia64_memory_insert_breakpoint)
110 (ia64_memory_remove_breakpoint): Return immediately if any of memory
111 reads fail. Do not combine the VAL values.
113 2009-09-08 Jan Kratochvil <jan.kratochvil@redhat.com>
115 Fix ia64 shadowing of breakpoints in multiple slots of a single bundle.
116 * ia64-tdep.c (ia64_memory_insert_breakpoint): New call
117 of make_show_memory_breakpoints_cleanup with parameter 0. Move the
118 reading of SHADOW_CONTENTS to this memory state point of code. Update
119 comment for the memory re-read.
121 2009-09-07 Michael Snyder <msnyder@vmware.com>
123 * record.c: Minor comment and white space fix-ups.
125 2009-09-07 Jan Kratochvil <jan.kratochvil@redhat.com>
127 * m68k-tdep.c (m68k_gdbarch_init): Allocate TDEP as cleared.
128 * sparc-tdep.c (sparc32_gdbarch_init): Allocate TDEP as cleared.
129 Remove explicit clearing of TDEP fields.
131 2009-09-06 Hui Zhu <teawater@gmail.com>
133 * i386-tdep.c (i386_record_check_override): Deleted.
134 (i386_record_lea_modrm): Ditto.
135 (i386_process_record): Ditto.
137 2009-09-05 Eli Zaretskii <eliz@gnu.org>
139 * config/djgpp/djconfig.sh: Fix for Autoconf 2.64.
140 * config/djgpp/config.sed: Fix for Autoconf 2.64.
142 2009-09-05 Hui Zhu <teawater@gmail.com>
144 * i386-tdep.c (i386_record_s): Add orig_addr.
145 (i386_record_check_override): New function.
146 (i386_record_lea_modrm): Call i386_record_check_override.
147 (i386_process_record): Ditto.
149 2009-09-03 Nathan Froyd <froydnj@codesourcery.com>
151 * dwarf2loc.c (struct piece_closure): New.
152 (allocate_piece_closure): New function.
153 (read_pieced_value): New function.
154 (write_pieced_value): New function.
155 (copy_pieced_value_closure): New function.
156 (free_pieced_value_closure): New function.
157 (pieced_value_funcs): Define.
158 (dwarf2_evaluate_loc_desc): Return a computed value for a variable
159 described with pieces.
161 2009-09-03 Pierre Muller <muller@ics.u-strasbg.fr>
162 Richard Earnshaw <rearnsha@arm.com>
164 * arm-tdep.c (displaced_write_reg): Replace call to abort by call
167 2009-09-02 Tom Tromey <tromey@redhat.com>
169 * frame.h (frame_unwinder_is): Declare.
170 * frame.c (frame_unwinder_is): New function.
171 * dwarf2loc.c: Include dwarf2-frame.h.
172 (dwarf_expr_frame_cfa): New function.
173 (dwarf2_evaluate_loc_desc): Use it.
174 (needs_frame_frame_cfa): New function.
175 (dwarf2_loc_desc_needs_frame): Use it.
176 * dwarf2expr.h (struct dwarf_expr_context) <get_frame_cfa>: New
178 * dwarf2expr.c (execute_stack_op) <DW_OP_call_frame_cfa>: New
180 * dwarf2-frame.h (dwarf2_frame_cfa): Declare.
181 * dwarf2-frame.c (no_get_frame_cfa): New function.
182 (execute_stack_op): Use it.
183 (dwarf2_frame_cfa): New function.
185 2009-09-02 Hui Zhu <teawater@gmail.com>
187 * record.c (record_resume): Change "signal" to "siggnal".
189 2009-09-01 Hui Zhu <teawater@gmail.com>
191 * record.c (record_resume): Change "siggnal" to "signal".
193 2009-09-01 Hui Zhu <teawater@gmail.com>
195 * record.c (record_resume_siggnal): Deleted.
196 (record_resume): Ditto.
197 (record_wait): Change record_resume_siggnal to
200 2009-08-31 Jacob Potter <jdpotter@google.com>
201 Doug Evans <dje@google.com>
203 Implement TARGET_OBJECT_STACK_MEMORY.
204 * NEWS: Add note on new "set stack-cache" option.
205 * corefile.c (read_stack): New function.
206 * dcache.c (dcache_struct): New member ptid.
207 (dcache_enable_p): Mark as obsolete.
208 (show_dcache_enabled_p): Flag option as deprecated.
209 (dcache_invalidate): Update ptid.
210 (dcache_invalidate_line): New function.
211 (dcache_read_line): No longer check cacheable attribute, stack
212 accesses get cached despite attribute.
213 (dcache_init): Set ptid.
214 (dcache_xfer_memory): Flush cache if from different ptid than before.
215 Update cache after write.
216 (dcache_update): New function.
217 (dcache_info): Report ptid.
218 (_initialize_dcache): Update text for `remotecache' to indicate it
220 * dcache.h (dcache_update): Declare.
221 * dwarf2loc.c (dwarf2_evaluate_loc_desc): Mark values on stack with
223 * frame-unwind.c (frame_unwind_got_memory): Ditto.
224 * gdbcore.h (read_stack): Declare.
225 * memattr.c (mem_enable_command): Call target_dcache_invalidate
226 instead of dcache_invalidate.
227 (mem_disable_command, mem_delete_command): Ditto.
228 * target.c (stack_cache_enabled_p_1): New static global.
229 (stack_cache_enabled_p): New static global.
230 (set_stack_cache_enabled_p): New function.
231 (show_stack_cache_enabled_p): New function.
232 (target_dcache): Make static.
233 (target_dcache_invalidate): New function.
234 (target_load, target_resume): Call target_dcache_invalidate
235 instead of dcache_invalidate.
236 (memory_xfer_partial): New arg object, all callers updated.
237 Check for existing inferior before calling dcache routines.
238 When writing non-TARGET_OBJECT_STACK_MEMORY, notify dcache.
239 (target_xfer_partial): Call memory_xfer_partial for
240 TARGET_OBJECT_STACK_MEMORY.
241 (target_read_stack): New function.
242 (initialize_targets): Install new option `stack-cache'.
243 * target.h: Remove #include of dcache.h.
244 (enum target_object): New value TARGET_OBJECT_STACK_MEMORY.
245 (target_dcache): Delete.
246 (target_dcache_invalidate): Declare.
247 (target_read_stack): Declare.
248 * top.c (prepare_execute_command): New function.
249 (execute_command): Call prepare_execute_command
250 instead of free_all_values.
251 * top.h (prepare_execute_command): Declare.
252 * valops.c (get_value_at): New function.
253 (value_at): Guts moved to get_value_at.
254 (value_at_lazy): Similarly.
255 (value_fetch_lazy): Call read_stack for stack values.
256 * value.c (struct value): New member `stack'.
257 (value_stack, set_value_stack): New functions.
258 * value.h (value_stack, set_value_stack): Declare.
259 * mi/mi-main.c (mi_cmd_execute): Call prepare_execute_command
260 instead of free_all_values.
262 2009-08-29 Hui Zhu <teawater@gmail.com>
264 * i386-tdep.c (i386_process_record): Fix the error of string
265 ops instructions's handler.
267 2009-08-28 Doug Evans <dje@google.com>
269 * top.c (execute_command): Remove redundant comment.
271 2009-08-28 Daniel Jacobowitz <dan@codesourcery.com>
275 * value.c (value_primitive_field): Do not save value_offset for
277 (unpack_bits_as_long): Do not read an entire ULONGEST.
279 2009-08-28 Jan Kratochvil <jan.kratochvil@redhat.com>
281 Support constant DW_AT_data_member_location by GCC PR debug/40659.
283 (dwarf2_add_field <DW_TAG_member> <DW_AT_data_member_location>):
284 Initialize BYTE_OFFSET to 0 by default. Explicitly check if
286 (dwarf2_add_field <DW_TAG_inheritance> <DW_AT_data_member_location>)
287 (read_common_block <DW_AT_data_member_location>): New variable
288 byte_offset. Fix crash on non-DW_BLOCK ATTR values.
290 2009-08-28 Hui Zhu <teawater@gmail.com>
292 * record.c (record_list_release_next): Change the first
293 record_reg to record_end.
295 2009-08-27 Doug Evans <dje@google.com>
297 * value.c (free_all_values): Tweak comment.
299 * NEWS: Add note on "info sharedlibrary".
300 Remove note on "set print symbol-loading".
301 * main.c (captured_main): Pass !batch for from_tty when calling
302 symbol_file_add_main.
303 * objfiles.h (objfile_has_partial_symbols): Declare.
304 (objfile_has_full_symbols): Declare.
305 * objfiles.c (objfile_has_partial_symbols): New function.
306 (have_partial_symbols): Use it.
307 (objfile_has_full_symbols): New function.
308 (have_full_symbols): Use it.
309 * solib.c: Include interps.h.
310 (solib_read_symbols): Back out patch of 2008-07-10.
311 Add test for info_verbose for symbol loading messages for
312 consistency with symfile.c.
313 (info_sharedlibrary_command): Handle optional parameter of regex of
314 libraries to list. Inform user of libraries without debugging info.
315 Rewrite to use ui_out routines to format output.
316 * symfile.c (print_symbol_loading): Delete.
317 (symbol_file_add_with_addrs_or_offsets): Back out patch of 2008-07-10.
318 Print "no debugging symbols found" only if from_tty || info_verbose;
319 and only check file being loaded, not all files.
320 (reread_symbols): Test file being loaded for whether it has symbols,
322 (__initialize_symfile): Delete `set print symbol-loading'.
323 * symfile.h (print_symbol_loading): Delete.
325 2009-08-27 Jan Kratochvil <jan.kratochvil@redhat.com>
327 * varobj.c (varobj_create): Error if the specified frame was not found
330 2009-08-26 Michael Snyder <msnyder@vmware.com>
332 * i386-tdep.c (i386_process_record): Break out of prefix loop
333 if not amd64. Otherwise inc/dec instructions are lost.
335 2009-08-25 Keith Seitz <keiths@redhat.com>
337 * c-exp.y (yylex): Add cxx_only check for tokentab2 and tokentab3
339 (tokentab3): Add cxx_only for DOT_STAR.
341 2009-08-25 Pedro Alves <pedro@codesourcery.com>
343 * inferior.c (print_inferior): Align columns left. Remove header
344 for the the "current" column. Rename column "Id" to "Num".
345 Rename column "PID" to "Description". Print if there's no selected
348 2009-08-25 Jan Kratochvil <jan.kratochvil@redhat.com>
350 Fix ia64 start crash when GDB built with -lmcheck.
351 * ia64-tdep.c (ia64_gdbarch_init): Allocate TDEP as cleared. Remove
352 specific clearing of TDEP SIGCONTEXT_REGISTER_ADDRESS and
355 2009-08-24 Keith Seitz <keiths@redhat.com>
357 * c-exp.y (tokentab3): Add new token, ARROW_STAR. Changed all users.
358 (tokentab2): Add new token, DOT_STAR. Changed all users.
360 2009-08-24 Keith Seitz <keiths@redhat.com>
362 * symtab.c (default_make_symbol_completion_list): Keep
363 ':', too, so that we can limit searches in namespaces
366 2009-08-24 Tom Tromey <tromey@redhat.com>
368 * python/python-value.c (valpy_richcompare): Don't return from
371 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
373 * CONTRIBUTE: Bump documented Autoconf version.
374 * configure.ac: Do not substitute datarootdir, htmldir,
375 pdfdir, docdir. Do not process --with-datarootdir,
376 --with-htmldir, --with-pdfdir, --with-docdir.
377 * configure: Regenerate.
379 * aclocal.m4: Regenerate.
380 * config.in: Likewise.
381 * configure: Likewise.
382 * gnulib/Makefile.in: Likewise.
384 * configure.ac: Use AC_USE_SYSTEM_EXTENSIONS instead of
385 AC_GNU_SOURCE, AC_AIX, AC_ISC_POSIX.
387 2009-08-21 Paul Pluzhnikov <ppluzhnikov@google.com>
389 * objfiles.h (gdb_bfd_ref): New prototype.
390 * objfiles.c (gdb_bfd_ref): New function.
391 (allocate_objfile): Call it.
392 (gdb_bfd_unref): Adjust assertion.
393 * solib.c (solib_map_sections): Add reference.
394 (symbol_add_stub): Don't add reference here.
395 * symfile.c (reread_symbols): Add reference.
397 2009-08-21 Ken Werner <ken@linux.vnet.ibm.com>
398 Doug Evans <dje@google.com>
400 * jit.c (jit_event_handler): Use paddress to print target addresses.
401 Wrap printf string in _().
403 2009-08-21 Doug Evans <dje@google.com>
405 * jit.c (jit_read_descriptor): New arg gdbarch, all callers updated.
406 (jit_read_code_entry, jit_register_code): Ditto.
407 (jit_event_handler): Ditto.
408 (jit_inferior_init): Renamed from previous jit_inferior_created_hook.
409 (jit_inferior_created_hook, jit_breakpoint_re_set): New functions.
410 (jit_inferior_created_observer): Renamed from
411 jit_inferior_created_hook1, all callers updated.
412 * jit.h (jit_breakpoint_re_set): Declare.
413 (jit_event_handler): Update prototype.
414 * breakpoint.c (breakpoint_re_set): Call jit_breakpoint_re_set instead
415 of jit_inferior_created_hook.
417 2009-08-21 Hui Zhu <teawater@gmail.com>
419 * record.c (record_wait): Change the argument of
420 record_beneath_to_wait to options.
422 2009-08-20 Jacob Potter <jdpotter@google.com>
424 Replace dcache with splay tree.
425 Remove partially implemented writeback support.
426 * dcache.c: Include splay-tree.h.
427 (LINE_SIZE_POWER): Change from 5 to 6.
428 (DCACHE_SIZE): Change from 64 to 4096.
429 (ENTRY_INVALID, ENTRY_VALID, ENTRY_DIRTY): Delete.
430 (state_chars): Delete.
431 (struct dcache_block): Clean up; remove state and anydirty fields.
432 (struct dcache_struct): Redefine as a splay tree and linked list.
433 (last_cache): Make static.
434 (dcache_invalidate, dcache_hit): Rewrite for new cache structure.
435 (dcache_read_line, dcache_alloc): Rewrite for new cache structure.
436 (dcache_write_line): Delete.
437 (dcache_writeback): Delete.
438 (dcache_peek_byte): Clean up; remove "invalid" state check.
439 (dcache_poke_byte): Rewrite for new cache structure; clarify comment.
440 (dcache_splay_tree_compare): New function.
441 (dcache_init, dcache_free): Rewrite for new cache structure.
442 (dcache_xfer_memory): Rewrite for new write-through cache structure.
443 (dcache_print_line): New function.
444 (dcache_info): Rewrite for new cache structure.
445 (_initialize_dcache): Update "info dcache" help text.
446 * dcache.h (dcache_xfer_memory): Update declaration.
447 * target.c (memory_xfer_partial): Update calls to dcache_xfer_memory.
449 2009-08-19 Reid Kleckner <reid@kleckner.net>
451 Add interface for JIT code generation.
452 * NEWS: Announce JIT interface.
453 * Makefile.in (SFILES): Add jit.c.
454 (HFILES_NO_SRCDIR): Add jit.h.
455 (COMMON_OBS): Add jit.o.
458 * breakpoint.h (enum bptype): Add bp_jit_event to enum.
460 (update_breakpoints_after_exec): Delete jit breakpoints after exec.
461 (bpstat_what): Update event table for bp_jit_event.
462 (print_it_typical): Added case for bp_jit_event.
463 (print_one_breakpoint_location): Added case for bp_jit_event.
464 (allocate_bp_location): Added case for bp_jit_event.
465 (mention): Added case for bp_jit_event.
466 (delete_command): Added case for bp_jit_event.
467 (breakpoint_re_set_one): Added case for bp_jit_event.
468 (breakpoint_re_set): Added call to jit_inferior_created_hook.
469 (create_jit_event_breakpoint): New.
470 * infrun.c (handle_inferior_event): Add handler for jit event.
471 (follow_exec): Add call to jit_inferior_created_hook.
473 2009-08-19 Ulrich Weigand <uweigand@de.ibm.com>
475 * value.c (enum internalvar_kind): Replace INTERNALVAR_SCALAR by
476 INTERNALVAR_INTEGER and INTERNALVAR_POINTER.
477 (union internalvar_data): Replace "scalar" member by "integer"
479 (value_of_internalvar): Handle INTERNALVAR_INTEGER and
480 INTERNALVAR_POINTER instead of INTERNALVAR_SCALAR.
481 (get_internalvar_integer): Likewise.
482 (set_internalvar): Likewise.
483 (set_internalvar_integer): Likewise.
484 (preserve_one_internalvar): Likewise.
485 (value_from_pointer): Handle typedef'd pointer types.
487 2009-08-18 Tom Tromey <tromey@redhat.com>
489 * utils.c (add_internal_problem_command): Free set_doc and
491 * remote.c (add_packet_config_cmd): Free set_doc and show_doc.
492 * language.c (add_language): Free language_set_doc.
494 2009-08-18 Tom Tromey <tromey@redhat.com>
496 * Makefile.in (ALL_TARGET_OBS): Remove prologue-value.o, solib.o.
498 2009-08-17 Ulrich Weigand <uweigand@de.ibm.com>
500 * symfile.c (reread_symbols): Call objfiles_changed *before*
501 calling clear_symtab_users.
503 2009-08-17 Michael Snyder <msnyder@vmware.com>
505 * amd64-tdep.c: Add a frame unwinder for function epilogues.
506 (amd64_in_function_epilogue_p): New function.
507 (amd64_epilogue_frame_sniffer): New function.
508 (amd64_epilogue_frame_cache): New function.
509 (amd64_epilogue_frame_this_id): New function.
510 (amd64_epilogue_frame_unwind): New struct frame_unwind.
511 (amd64_init_abi): Hook the new unwinder.
513 * amd64-linux-tdep.c (amd64_linux_init_abi): Set gdbarch to use
514 SVR4 method for skip_trampoline_code.
516 2009-08-17 Pedro Alves <pedro@codesourcery.com>>
518 * objfiles.c (objfile_relocate): Relocate the entry point before
519 relocating the section offsets. Flush the section map before
520 resetting breakpoints.
522 2009-08-14 Doug Evans <dje@google.com>
524 * symfile.c (find_separate_debug_file): Remove double free of
527 2009-08-14 Pedro Alves <pedro@codesourcery.com>
529 * top.c (any_thread_of): Delete.
530 (kill_or_detach): Use any_thread_of_process.
531 * top.c (print_inferior_quit_action): New.
532 (quit_confirm): Rewrite to print info about all inferiors.
533 * target.c (dispose_inferior): New.
534 (target_preopen): Use it.
536 2009-08-14 Pedro Alves <pedro@codesourcery.com>
538 * ui-file.h (ui_file_xstrdup): Mention that the length argument
540 * ui-file.c (ui_file_xstrdup): Don't dereference LENGTH if it is
542 * aix-thread.c (aix_thread_extra_thread_info): Pass NULL as length
543 parameter to ui_file_xstrdup.
544 * arm-tdep.c (_initialize_arm_tdep): Ditto.
545 * infrun.c (print_target_wait_results): Ditto.
546 * language.c (add_language): Ditto.
547 * linespec.c (cplusplus_error): Ditto.
548 * remote.c (escape_buffer): Ditto.
549 * typeprint.c (type_to_string): Ditto.
550 * utils.c (error_stream): Ditto.
551 * varobj.c (value_get_print_value): Ditto.
552 * xtensa-tdep.c (xtensa_verify_config): Replace `dummy' local with
553 `length' local. Pass it to ui_file_xstrdup, and avoid an strlen
555 * gdbarch.sh (verify_gdbarch): Ditto.
556 * gdbarch.c: Regenerate.
557 * cli/cli-setshow.c (do_setshow_command): Pass NULL as length
558 parameter to ui_file_xstrdup.
559 * python/python-frame.c (frapy_str): Ditto.
560 * python/python-type.c (typy_str): Use the length local instead of
562 * python/python-value.c (valpy_str): Pass NULL as length parameter
565 2009-08-13 Doug Evans <dje@google.com>
567 * utils.c (gnu_debuglink_crc32): Store crc32_table as unsigned int
568 instead of unsigned long.
570 2009-08-13 Tom Tromey <tromey@redhat.com>
572 * varobj.c (update_dynamic_varobj_children): Don't use
574 * value.h: (preserve_one_value): Declare.
575 (value_prepend_to_list, value_remove_from_list): Remove.
576 * value.c (preserve_one_value): No longer static.
577 (preserve_values): Call preserve_python_values.
578 (value_prepend_to_list): Remove.
579 (value_remove_from_list): Remove.
580 * python/python.h (values_in_python): Don't declare.
581 (preserve_python_values): Declare.
582 * python/python-value.c (values_in_python): Change type. Move
584 (struct value_object): Add struct tag.
585 <next, prev>: New fields.
586 (valpy_dealloc): Update.
587 (note_value): New function.
588 (valpy_new): Use value_incref, note_value.
589 (preserve_python_values): New function.
590 (valpy_positive): Don't use value_copy.
591 (value_to_value_object): Use value_incref, note_value.
592 (convert_value_from_python): Update comment.
594 2009-08-13 Pedro Alves <pedro@codesourcery.com>
596 * remote.c (remote_pid_to_str): If printing a process id and we
597 don't know what the remote pid could be, output "Remote target";
598 otherwise, use normal_pid_to_str.
600 2009-08-13 Tom Tromey <tromey@redhat.com>
602 * language.h (longest_raw_hex_string): Remove unused declaration.
604 2009-08-13 Pedro Alves <pedro@codesourcery.com>
608 * language.c (language, type, range, case_sensitive): Make const.
609 (show_language_command): Don't call deprecated_show_value_hack.
611 (set_language_command): An unrecognized language is now an
612 internal error instead of a user error. Don't call set_lang_str.
613 (show_type_command): Don't call deprecated_show_value_hack.
614 Special case "auto". Use warning.
615 (set_type_command): An unrecognized type is now an internal error
616 instead of a user error. Output type check mismatch with language
617 here. Don't call set_type_str.
618 (show_range_command): Don't call deprecated_show_value_hack.
619 Special case "auto". Use warning.
620 (set_range_command): An unrecognized range check is now an
621 internal error instead of a warning. Output range check mismatch
622 with language here. Don't call set_range_str.
623 (show_case_command): Don't call deprecated_show_value_hack.
624 Special case "auto". Use warning.
625 (set_case_command): Don't call set_case_str. An unrecognized case
626 check is now an internal error instead of a warning. Output range
627 check mismatch with language here. Don't call set_case_str.
628 (set_type_range_case): Don't call set_type_str, set_range_str or
630 (set_lang_str, set_type_str, set_range_str, set_case_str): Delete.
631 (add_language): Install or reinstall the "set language" command
632 here, and make it an enum command. Build the enumeration and the
633 help string from the current list of known languages.
634 (_initialize_language): Don't install "set language" here. Make
635 "set check type", "set check range" and "set case-sensitive" enum
636 commands. Register the "auto" "local" and "unknown" languages in
639 2009-08-13 Pedro Alves <pedro@codesourcery.com>
641 Revert 2009-08-07 changes for PR gdb/8869:
643 * language.c (set_language_command): Strip whitespace.
644 (set_type_command): Likewise.
645 (set_range_command): Likewise.
647 * language.c (language_completer): New function.
648 (range_or_type_completer): New function.
649 (case_completer): New function.
650 (_initialize_language): Set completers.
651 * cli/cli-decode.c (add_setshow_string_cmd): Return the "set"
653 (add_setshow_string_noescape_cmd): Likewise.
654 (add_setshow_integer_cmd): Likewise.
655 (add_setshow_uinteger_cmd): Likewise.
656 (add_setshow_zinteger_cmd): Likewise.
657 (add_setshow_zuinteger_cmd): Likewise.
658 * command.h (add_setshow_string_cmd,
659 add_setshow_string_noescape_cmd, add_setshow_uinteger_cmd,
660 add_setshow_zinteger_cmd, add_setshow_zuinteger_cmd): Update.
662 2009-08-12 Michael Snyder <msnyder@vmware.com>
664 * remote.c (remote_add_inferior): Remove unused local.
665 (remote_add_thread): Ditto.
667 (remote_current_thread): Ditto.
668 (remote_stop_ns): Ditto.
669 (remote_parse_stop_reply): Ditto.
670 (remote_get_pending_stop_replies): Ditto.
671 (remote_wait_ns): Ditto.
672 (remote_wait_as): Ditto.
673 (send_g_packet): Ditto.
674 (remote_fetch_registers): Ditto.
675 (store_register_using_P): Ditto.
676 (remote_store_registers): Ditto.
677 (remote_remove_breakpoint): Ditto.
678 (remote_write_qxfer): Ditto.
679 (remote_read_qxfer): Ditto.
681 2009-08-11 Tom Tromey <tromey@redhat.com>
683 * dwarf2loc.c (dwarf2_evaluate_loc_desc): Make a cleanup.
684 (dwarf2_loc_desc_needs_frame): Likewise.
685 * dwarf2expr.h (make_cleanup_free_dwarf_expr_context): Declare.
686 * dwarf2expr.c (free_dwarf_expr_context_cleanup): New function.
687 (make_cleanup_free_dwarf_expr_context): Likewise.
688 * dwarf2-frame.c (execute_stack_op): Make a cleanup.
690 2009-08-10 Jan Kratochvil <jan.kratochvil@redhat.com>
692 * objfiles.c (gdb_bfd_unref): Use the bfd_usrdata accessor.
693 * solib.c (symbol_add_stub): Likewise.
694 * symfile.c (symfile_bfd_open): Assert BFD_USRDATA is NULL.
696 2009-08-10 Paul Pluzhnikov <ppluzhnikov@google.com>
698 * objfiles.c (qsort_cmp): Remove assert.
699 (preferred_obj_section): New function.
700 (update_section_map): Filter duplicates.
702 2009-08-10 Tristan Gingold <gingold@adacore.com>
704 * solib-darwin.c (find_program_interpreter): Simplify the code by
705 looking up for the load_dylinker command instead of reading the
706 corresponding (but deprecated) section.
707 (darwin_solib_create_inferior_hook): Adjust: do not free the
710 2009-08-10 Tristan Gingold <gingold@adacore.com>
712 * i386-darwin-tdep.c (i386_m128_p): New function.
713 (i386_darwin_arg_type_alignment): Ditto.
714 (i386_darwin_push_dummy_call): Ditto.
715 (i386_darwin_init_abi): Define Darwin specific push_dummy_call.
716 Adjust long_double size. Adjust pc offset in setjump buffer.
718 2009-08-10 Hui Zhu <teawater@gmail.com>
720 Add Linux AMD64 process record support.
722 * amd64-linux-tdep.c (amd64_linux_record_tdep): New variable.
723 This struct has the argument for the function
724 "record_linux_system_call".
725 (amd64_linux_syscall_record): New function. Parse the
726 system call instruction and call function
727 "record_linux_system_call" to record execute log.
728 (i386_linux_init_abi): Initialize "amd64_linux_record_tdep".
729 Set "amd64_linux_syscall_record" to "i386_syscall_record".
731 2009-08-10 Hui Zhu <teawater@gmail.com>
733 Add process record Linux system call 64 bits support.
735 * linux-record.h (linux_record_tdep): Add size_pointer,
736 size_size_t, size_iovec and arg6. Change the values of
737 size_int, size_long and size_ulong to
738 gdbarch_int_bit (gdbarch) / TARGET_CHAR_BIT,
739 gdbarch_long_bit (gdbarch) / TARGET_CHAR_BIT,
740 gdbarch_long_bit (gdbarch) / TARGET_CHAR_BIT.
741 * i386-linux-tdep.c (i386_linux_init_abi): Ditto.
742 (i386_linux_intx80_sysenter_record): Add a check for system
744 * linux-record.c (record_linux_system_call): Make this
745 function support 64 bits.
747 2009-08-10 Hui Zhu <teawater@gmail.com>
749 Add AMD64 process record instruction set support.
751 * i386-tdep.h (gdbarch_tdep): Add record_regmap for registers
752 because the AMD64's registers order in GDB is not same with
754 Add i386_syscall_record to be the syscall function handle
756 (record_i386_regnum): Number for record_regmap.
757 * i386-tdep.c (OT_QUAD): For 64 bits.
758 (i386_record_s): Add rex_x, rex_b, rip_offset and
759 popl_esp_hack for AMD64 instruction set. And regmap for
761 (i386_record_lea_modrm_addr): Support AMD64 instruction set
763 (i386_record_lea_modrm): Ditto.
764 (i386_record_push): New function. Record the execution log
766 (I386_RECORD_ARCH_LIST_ADD_REG): New macro to record the
768 (i386_process_record): Support AMD64 instruction set.
769 * amd64-tdep.c (amd64_record_regmap): For record_regmap.
770 (amd64_init_abi): Set amd64_record_regmap to record_regmap.
772 2009-08-08 Pedro Alves <pedro@codesourcery.com>
774 * bfd-target.c (struct target_bfd_data): New.
775 (target_bfd_xfer_partial): Adjust to get at the section table from
777 (target_bfd_get_section_table): Ditto.
778 (target_bfd_xclose): Ditto. Get the bfd pointer from the
779 target_bfd_data structure, from the section table.
780 (target_bfd_reopen): Store a struct target_bfd_data in the
781 target_ops to_data field, instead of a target_section_table.
783 2009-08-08 Aleksandar Ristovski <aristovski@qnx.com>
784 Hui Zhu <teawater@gmail.com>
786 * record.c (record_store_registers): Remove unused variable.
788 2009-08-07 Tom Tromey <tromey@redhat.com>
790 * language.c (set_language_command): Strip whitespace.
791 (set_type_command): Likewise.
792 (set_range_command): Likewise.
794 2009-08-07 Tom Tromey <tromey@redhat.com>
797 * language.c (language_completer): New function.
798 (range_or_type_completer): New function.
799 (case_completer): New function.
800 (_initialize_language): Set completers.
801 * cli/cli-decode.c (add_setshow_string_cmd): Return the "set"
803 (add_setshow_string_noescape_cmd): Likewise.
804 (add_setshow_integer_cmd): Likewise.
805 (add_setshow_uinteger_cmd): Likewise.
806 (add_setshow_zinteger_cmd): Likewise.
807 (add_setshow_zuinteger_cmd): Likewise.
808 * command.h (add_setshow_string_cmd,
809 add_setshow_string_noescape_cmd, add_setshow_uinteger_cmd,
810 add_setshow_zinteger_cmd, add_setshow_zuinteger_cmd): Update.
812 2009-08-06 Paul Pluzhnikov <ppluzhnikov@google.com>
815 * dwarf2-frame.c (qsort_fde_cmp): Use stable sort.
817 2009-08-06 Paul Pluzhnikov <ppluzhnikov@google.com>
819 * dwarf2-frame.c (struct dwarf2_cie): Remove 'next'.
820 (struct dwarf2_cie_table): New.
821 (struct dwarf2_fde): Remove 'next'.
822 (struct dwarf2_fde_table): New.
823 (struct comp_unit): Remove 'cie'.
824 (bsearch_cie_cmp, bsearch_fde_cmp): New function.
825 (find_cie, dwarf2_frame_find_fde): Use bsearch.
826 (add_cie, add_fde): Use array instead of linked list.
827 (decode_frame_entry, decode_frame_entry_1): New parameters.
828 (qsort_fde_cmp): New function.
829 (dwarf2_build_frame_info): Adjust.
831 2009-08-06 Don Lee <don.lee@sunplusct.com>
833 * score-tdep.c: Support a new Sunplus CT S+core variant, S+core 3.
834 * score-tdep.h: Ditto.
836 * configure.tgt: Test do we have a simulator.
837 * MAINTAINERS: Add myself under target score
839 2009-08-06 Nick Roberts <nickrob@snap.net.nz>
841 * utils.c (defaulted_query): Don't ask for confirmation if server
844 2009-08-05 Tom Tromey <tromey@redhat.com>
846 * spu-tdep.h (SPUADDR_SPU): Cast result to int.
848 2009-08-04 Paul Pluzhnikov <ppluzhnikov@google.com>
850 * objfiles.h (OBJF_KEEPBFD): Delete.
851 (gdb_bfd_unref): New prototype.
852 * objfiles.c (gdb_bfd_unref): New function.
853 (free_objfile): Call gdb_bfd_unref.
854 * solib.c (free_so): Likewise.
855 (symbol_add_stub): Set refcount.
857 2009-08-04 Hui Zhu <teawater@gmail.com>
858 Michael Snyder <msnyder@vmware.com>
860 * record.c (record_mem_entry): New field 'mem_entry_not_accessible'.
861 (record_arch_list_add_mem): Initialize 'mem_entry_not_accessible'.
862 (record_wait): Set 'mem_entry_not_accessible' flag if target
863 memory not readable. Don't try to change target memory if
864 'mem_entry_not_accessible' is set.
866 2009-08-03 Richard Guenther <rguenther@suse.de>
867 Jan Kratochvil <jan.kratochvil@redhat.com>
869 Fix memory corruption on reread of file through a symbolic link.
870 * symfile.c (find_separate_debug_file): Initialize CANON_NAME earlier.
871 Allocate DEBUGFILE with length based on CANON_NAME. Free CANON_NAME on
872 all the return paths.
874 2009-08-03 Jim Ingham <jingham@apple.com>
875 Vladimir Prus <vladimir@codesourcery.com>
877 Implement -break-commands
879 * breakpoint.c (get_breakpoint, breakpoint_set_commands): New.
880 (commands_command): Use breakpoint_set_commands.
881 * breakpoint.h (get_breakpoint, breakpoint_set_commands): Declare.
883 * mi/mi-cmds.h (mi_cmd_break_commands): New.
884 * mi/mi-cmds.c: Register -break-commands.
885 * mi/mi-cmd-break.c (mi_cmd_break_commands, mi_read_next_line)
886 (mi_command_line_array, mi_command_line_array_cnt)
887 (mi_command_line_array_ptr): New.
889 2009-08-03 Jim Ingham <jingham@apple.com>
890 Vladimir Prus <vladimir@codesourcery.com>
892 Refactor reading of commands
894 * defs.h (read_command_lines_1): Declare.
895 * cli/cli-script.c (read_next_line): Only return string,
897 (process_next_line): New, extracted from read_next_line.
898 (recurse_read_control_structure): Take a function pointer to the
900 (get_command_line) Pass the read_next_line as reader function
901 into recurse_read_control_structure.
902 (read_command_lines_1): New, extracted from...
903 (read_command_lines): ...here.
905 2009-07-31 Kazu Hirata <kazu@codesourcery.com>
907 * procfs.c (proc_set_current_signal): Populate mysinfo before
909 (proc_clear_current_signal): Likewise.
910 (proc_set_watchpoint): Populate pwatch before copying it to arg.
912 2009-07-31 Michael Snyder <msnyder@vmware.com>
914 * remote.c (store_register_using_P): Call putpkt and getpkt
915 directly instead of calling remote_send.
916 (store_registers_using_G): Ditto.
917 (fetch_register_using_p): Ditto.
919 * remote.c (store_register_using_P): Make error msg more verbose.
920 (store_registers_using_G): Ditto.
921 (fetch_register_using_p): Ditto.
923 2009-07-31 Ulrich Weigand <uweigand@de.ibm.com>
925 * spu-tdep.c: Include "infcall.h".
926 (spu_address_class_type_flags): New function.
927 (spu_address_class_type_flags_to_name): Likewise.
928 (spu_address_class_name_to_type_flags): Likewise.
929 (spu_pointer_to_address): Handle __ea pointers.
930 (spu_auto_flush_cache_p): New static variable.
931 (spu_objfile_from_frame): New function.
932 (flush_ea_cache, spu_attach_normal_stop): Likewise.
933 (show_spu_auto_flush_cache): Likewise.
934 (spu_gdbarch_init): Install address class handlers.
935 (_initialize_spu_tdep): Attach to normal_stop observer.
936 Install "set spu auto-flush-cache" / "show spu auto-flush-cache"
939 * NEWS: Mention "set/show spu auto-flush-cache" commands.
941 2009-07-31 Ulrich Weigand <uweigand@de.ibm.com>
943 * spu-tdep.c: Include "block.h".
944 (setspucmdlist, showspucmdlist): New static variables.
945 (spu_stop_on_load_p): Likewise.
946 (spu_catch_start): New function.
947 (show_spu_command, set_spu_command): New functions.
948 (show_spu_stop_on_load): Likewise.
949 (_initialize_spu_tdep): Attach spu_catch_start to new_objfile observer.
950 Install "set spu" / "show spu" prefix command handler.
951 Install "set spu stop-on-load" / "show spu stop-on-load" command.
953 * NEWS: Mention "set/show spu stop-on-load" commands.
955 2009-07-31 Ulrich Weigand <uweigand@de.ibm.com>
957 * ppc-linux-tdep.c: Include "solib.h", "solist.h", "exceptions.h",
958 "arch-utils.h", and "spu-tdep.h".
959 (spu_context_objfile, spe_context_lm_addr, spe_context_offset):
960 New static variables.
961 (spe_context_cache_ptid, spe_context_cache_address): Likewise.
962 (ppc_linux_spe_context_lookup): New function.
963 (ppc_linux_spe_context_inferior_created): Likewise.
964 (ppc_linux_spe_context_solib_loaded): Likewise.
965 (ppc_linux_spe_context_solib_unloaded): Likewise.
966 (ppc_linux_spe_context): Likewise.
967 (struct ppu2spu_cache, struct ppu2spu_data): New data types.
968 (ppu2spu_prev_arch, ppu2spu_this_id, ppu2spu_prev_register,
969 ppu2spu_unwind_register, ppu2spu_sniffer,
970 ppu2spu_dealloc_cache): New functions.
971 (ppu2spu_unwind): New static variable.
972 (ppc_linux_init_abi): Install cross-architecture unwinder.
973 (_initialize_ppc_linux_tdep): Attach to observers.
975 * spu-tdep.c (struct spu2ppu_cache): New data type.
976 (spu2ppu_prev_arch, spu2ppu_this_id, spu2ppu_prev_register,
977 spu2ppu_sniffer, spu2ppu_dealloc_cache): New functions.
978 (spu2ppu_unwind): New static variable.
979 (spu_gdbarch_init): Install cross-architecture unwinder.
981 2009-07-31 Ulrich Weigand <uweigand@de.ibm.com>
983 * target.h (enum strata): New value arch_stratum.
984 * target.c (target_require_runnable): Skip arch_stratum targets.
986 * configure.tgt (powerpc-*-linux* | powerpc64-*-linux*): Add
987 solib-spu.o and spu-multiarch.o to gdb_target_obs.
988 * Makefile.in (ALL_TARGET_OBS): Add solib-spu.o and spu-multiarch.o.
989 (ALLDEPFILES): Add solib-spu.c and spu-multiarch.c.
991 * solib-spu.c: New file.
992 * solib-spu.h: New file.
993 * spu-multiarch.c: New file.
995 * spu-tdep.h (SPUADDR, SPUADDR_SPU, SPUADDR_ADDR): New macros.
997 * spu-tdep.c (struct gdbarch_tdep): New member id.
998 (spu_gdbarch_id): New function.
999 (spu_lslr): New function.
1001 (spu_address_to_pointer): New function.
1002 (spu_pointer_to_address): Support SPU ID address encoding. Use
1003 spu_gdbarch_id and spu_lslr.
1004 (spu_integer_to_address): Likewise.
1005 (spu_frame_unwind_cache): Update for encoded addresses.
1006 (spu_unwind_pc, spu_unwind_sp): Likewise.
1007 (spu_read_pc, spu_write_pc): Likewise.
1008 (spu_push_dummy_call): Likewise.
1009 (spu_software_single_step): Likewise.
1010 (spu_get_longjmp_target): Likewise.
1011 (spu_overlay_update_osect): Likewise.
1013 (spu_dis_asm_print_address): New function.
1014 (gdb_print_insn_spu): Likewise.
1016 (spu_gdbarch_init): Store SPU ID in tdep structure.
1017 Install spu_address_to_pointer and gdb_print_insn_spu.
1019 * ppc-linux-tdep.c: Include "observer.h", "auxv.h", "elf/common.h"
1021 (ppc_linux_entry_point_addr): New static variable.
1022 (ppc_linux_inferior_created): New function.
1023 (ppc_linux_displaced_step_location): Likewise.
1024 (ppc_linux_init_abi): Enable Cell/B.E. support if supported
1026 (_initialize_ppc_linux_tdep): Attach to inferior_created observer.
1028 * NEWS: Mention multi-architecture and Cell/B.E. debugging
1031 2009-07-31 Ulrich Weigand <uweigand@de.ibm.com>
1033 * linux-nat.c: Include <sys/vfs.h>.
1034 (SPUFS_MAGIC): Define.
1035 (spu_enumerate_spu_ids): New function.
1036 (linux_proc_xfer_spu): New function.
1037 (linux_xfer_partial): Handle TARGET_OBJECT_SPU.
1039 (iterate_over_spus): New function.
1040 (struct linux_spu_corefile_data): New data type.
1041 (linux_spu_corefile_callback): New function.
1042 (linux_spu_make_corefile_notes): New function.
1043 (linux_nat_make_corefile_notes): Call it.
1045 * corelow.c (struct spuid_list): New data type.
1046 (add_to_spuid_list): New function.
1047 (core_xfer_partial): Handle TARGET_OBJECT_SPU.
1049 2009-07-31 Ulrich Weigand <uweigand@de.ibm.com>
1051 * features/Makefile: Allow sub-platform specific expedite settings.
1052 (WHICH): Add rs6000/powerpc-cell32l and rs6000/powerpc-cell64l.
1053 (rs6000/powerpc-cell32l-expedite): Define.
1054 (rs6000/powerpc-cell64l-expedite): Likewise.
1055 * features/rs6000/powerpc-cell32l.xml: New file.
1056 * features/rs6000/powerpc-cell64l.xml: New file.
1057 * features/rs6000/powerpc-cell32l.c: New generated file.
1058 * features/rs6000/powerpc-cell64l.c: New generated file.
1060 * regformats/rs6000/powerpc-cell32l.dat: New generated file.
1061 * regformats/rs6000/powerpc-cell64l.dat: New generated file.
1063 * config/djgpp/fnchange.lst: Add mappings for new files.
1065 * ppc-linux-tdep.h (tdesc_powerpc_cell32l): Add prototype.
1066 (tdesc_powerpc_cell64l): Likewise.
1067 * ppc-linux-tdep.c: Include "features/rs6000/powerpc-cell32l.c"
1068 and "features/rs6000/powerpc-cell64l.c".
1069 (_initialize_ppc_linux_tdep): Initialize target descriptions.
1070 (ppc_linux_spu_section): New function.
1071 (ppc_linux_core_read_description): Detect Cell/B.E. core files.
1072 * ppc-linux-nat.c (PPC_FEATURE_CELL): Define.
1073 (ppc_linux_read_description): Detect Cell/B.E. architecture.
1075 * rs6000-tdep.c (rs6000_gdbarch_init): Do not trust BFD wordsize
1076 if exec file is not PowerPC architecture.
1078 2009-07-31 Ulrich Weigand <uweigand@de.ibm.com>
1080 * features/gdb-target.dtd (target): Accept optional
1081 <compatible> elements.
1082 (compatible): Define element.
1084 * target-descriptions.h (tdesc_compatible_p): New.
1085 (tdesc_add_compatible): New.
1086 * target-descriptions.c (arch_p): New VEC_P type.
1087 (struct target_desc): New member compatible.
1088 (free_target_description): Handle it.
1089 (maint_print_c_tdesc_cmd): Likewise.
1090 (tdesc_compatible_p): New function.
1091 (tdesc_add_compatible): New function.
1093 * xml-tdesc.c (tdesc_end_compatible): New function.
1094 (target_children): Handle <compatible> element.
1096 * arch-utils.c (choose_architecture_for_target): Accept target
1097 description instead of BFD architecture as input. Query target
1098 description for compatible architectures.
1099 (gdbarch_info_fill): Update call.
1101 * NEWS: Mention <compatible> element of target descriptions.
1103 2009-07-31 Ulrich Weigand <uweigand@de.ibm.com>
1105 * breakpoint.c (remove_breakpoints): If removing one breakpoint
1106 location fails, still continue to remove other locations.
1107 (remove_hw_watchpoints): Likewise.
1108 (detach_breakpoints): Likewise.
1110 2009-07-31 Ulrich Weigand <uweigand@de.ibm.com>
1112 * breakpoint.h (enum enable_state): Add bp_startup_disabled.
1113 (disable_breakpoints_before_startup): Add prototype.
1114 (enable_breakpoints_after_startup): Likewise.
1116 * breakpoint.c (executing_startup): New static variable.
1117 (describe_other_breakpoints): Handle bp_startup_disabled.
1118 (check_duplicates_for): Likewise.
1119 (disable_breakpoints_before_startup): New function.
1120 (enable_breakpoints_after_startup): New function.
1121 (create_breakpoint): Mark new breakpoints as bp_startup_disabled
1122 if executing_startup flag is true.
1123 (break_command_really): Likewise.
1124 (breakpoint_re_set_one): Skip bp_startup_disabled breakpoints.
1126 2009-07-31 Julian Brown <julian@codesourcery.com>
1128 * arm-linux-tdep.c (arch-utils.h, inferior.h, gdbthread.h, symfile.h):
1130 (arm_linux_cleanup_svc, arm_linux_copy_svc): New.
1131 (cleanup_kernel_helper_return, arm_catch_kernel_helper_return): New.
1132 (arm_linux_displaced_step_copy_insn): New.
1133 (arm_linux_init_abi): Initialise displaced stepping callbacks.
1134 * arm-tdep.c (DISPLACED_STEPPING_ARCH_VERSION): New macro.
1136 (displaced_read_reg, displaced_in_arm_mode, branch_write_pc)
1137 (bx_write_pc, load_write_pc, alu_write_pc, displaced_write_reg)
1138 (insn_references_pc, copy_unmodified, cleanup_preload, copy_preload)
1139 (copy_preload_reg, cleanup_copro_load_store, copy_copro_load_store)
1140 (cleanup_branch, copy_b_bl_blx, copy_bx_blx_reg, cleanup_alu_imm)
1141 (copy_alu_imm, cleanup_alu_reg, copy_alu_reg)
1142 (cleanup_alu_shifted_reg, copy_alu_shifted_reg, cleanup_load)
1143 (cleanup_store, copy_extra_ld_st, copy_ldr_str_ldrb_strb)
1144 (cleanup_block_load_all, cleanup_block_store_pc)
1145 (cleanup_block_load_pc, copy_block_xfer, cleanup_svc, copy_svc)
1146 (copy_undef, copy_unpred): New.
1147 (decode_misc_memhint_neon, decode_unconditional)
1148 (decode_miscellaneous, decode_dp_misc, decode_ld_st_word_ubyte)
1149 (decode_media, decode_b_bl_ldmstm, decode_ext_reg_ld_st)
1150 (decode_svc_copro, arm_process_displaced_insn)
1151 (arm_displaced_init_closure, arm_displaced_step_copy_insn)
1152 (arm_displaced_step_fixup): New.
1153 (arm_gdbarch_init): Initialise max insn length field.
1154 * arm-tdep.h (DISPLACED_TEMPS, DISPLACED_MODIFIED_INSNS): New
1156 (displaced_step_closure, pc_write_style): New.
1157 (arm_displaced_init_closure, displaced_read_reg)
1158 (arm_process_displaced_insn, arm_displaced_init_closure)
1159 (displaced_read_reg, displaced_write_reg, arm_displaced_step_copy_insn)
1160 (arm_displaced_step_fixup): Add prototypes.
1162 2009-07-31 Pedro Alves <pedro@codesourcery.com>
1163 Julian Brown <julian@codesourcery.com>
1165 * infrun.c (displaced_step_fixup): If this is a software
1166 single-stepping arch, don't tell the target to single-step.
1167 (maybe_software_singlestep): Return 0 if we're using displaced
1169 (resume): If this is a software single-stepping arch, and
1170 displaced-stepping is enabled, use it for all single-step
1173 2009-07-30 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
1175 * Makefile.in (ACLOCAL, ACLOCAL_AMFLAGS, aclocal_m4_deps)
1176 (AUTOCONF, configure_deps, AUTOHEADER): New variables.
1177 ($(srcdir)/aclocal.m4, $(srcdir)/configure, $(srcdir)/config.in)
1178 (am--refresh): New rules.
1179 (stamp-h, config.status): List config.in and configure including
1181 * aclocal.m4: Regenerate.
1182 * configure: Regenerate.
1184 2009-07-30 Thomas Schwinge <tschwinge@gnu.org>
1186 * gnu-nat.c (add_task_commands) <stopped>: Register the correct
1189 2009-07-30 H.J. Lu <hongjiu.lu@intel.com>
1191 * ia64-tdep.c (ia64_access_reg): Correct paddress.
1193 2009-07-30 Jan Kratochvil <jan.kratochvil@redhat.com>
1195 Replace public function varobj_list by all_root_varobjs iterator.
1196 * mi/mi-cmd-var.c (struct mi_cmd_var_update, mi_cmd_var_update_iter):
1198 (mi_cmd_var_update): Replace the varobj_list call by all_root_varobjs.
1199 Remove the variables rootlist, cr. New variable data.
1200 * varobj.c (rootcount, varobj_list): Remove.
1201 (install_variable, uninstall_variable): Remove the rootcount updates.
1202 (all_root_varobjs): New function.
1203 (varobj_invalidate): Use the all_root_varobjs call. Move the code to...
1204 (varobj_invalidate_iter): ... a new function.
1205 * varobj.h (varobj_list): Remove the prototype.
1206 (all_root_varobjs): New prototype.
1208 2009-07-29 Paul Pluzhnikov <ppluzhnikov@google.com>
1211 * dbxread.c (read_dbx_symtab): Reduce stack use.
1213 2009-07-29 Jan Kratochvil <jan.kratochvil@redhat.com>
1215 Fix gcc-4.5 HEAD warnings.
1216 * cp-name-parser.y (%union <typed_val_int>, %token GLOBAL)
1217 (GLOBAL_CONSTRUCTORS, GLOBAL_DESTRUCTORS, demangler_special <GLOBAL>):
1219 (yylex <"global constructors keyed to ">)
1220 (yylex <"global destructors keyed to ">): Base it on DEMANGLER_SPECIAL.
1221 (cp_comp_to_string): Remove variables str, prefix and buf. Remove the
1222 GLOBAL_DESTRUCTORS and GLOBAL_CONSTRUCTORS handling.
1223 (cp_print): Remove the GLOBAL_DESTRUCTORS and GLOBAL_CONSTRUCTORS
1226 2009-07-28 Daniel Jacobowitz <dan@codesourcery.com>
1228 * NEWS: Mention ARM VFP support.
1229 * target-descriptions.c (tdesc_register_type): Make public.
1230 (tdesc_unnumbered_register): New function.
1231 (tdesc_register_reggroup_p): Allow missing
1232 pseudo_register_reggroup_p.
1233 * target-descriptions.h (tdesc_register_type): Declare.
1234 (tdesc_unnumbered_register): Declare.
1235 * arm-tdep.c (arm_neon_quad_read, arm_neon_quad_write): New functions.
1236 (arm_push_dummy_call): Use arm_neon_quad_write.
1237 (arm_neon_double_type, arm_neon_quad_type): New functions.
1238 (arm_register_type): Handle VFP and NEON registers. Override the
1239 types of double-precision registers for NEON. Disable FPA registers
1240 if they are not present.
1241 (arm_dwarf_reg_to_regnum): Add current VFP and NEON register numbers.
1242 (arm_return_value): Use arm_neon_quad_write and arm_neon_quad_read.
1243 (arm_register_name): Handle VFP single and NEON quad registers.
1244 (arm_pseudo_read, arm_pseudo_write): New functions.
1245 (arm_gdbarch_init): Check for VFP and NEON in the target description.
1246 Assign numbers to double-precision registers. Register VFP and NEON
1247 pseudo registers. Remove a shadowed "i" variable.
1248 * arm-tdep.h (enum gdb_regnum): Add ARM_D0_REGNUM and
1250 (struct gdbarch_tdep): Add have_neon_pseudos, have_neon,
1251 have_vfp_registers, have_vfp_pseudos, neon_double_type,
1254 * features/Makefile: Make expedite settings only architecture
1256 (WHICH): Add new ARM descriptions.
1257 * features/arm-with-neon.xml, features/arm-with-vfpv2.c,
1258 features/arm-with-vfpv3.c, features/arm-vfpv2.xml,
1259 features/arm-vfpv3.xml, features/arm-with-vfpv2.xml,
1260 features/arm-with-vfpv3.xml, features/arm-with-neon.c: New files.
1261 * regformats/arm-with-neon.dat, regformats/arm-with-vfpv2.dat,
1262 regformats/arm-with-vfpv3.dat: Generate.
1264 2009-07-28 Daniel Jacobowitz <dan@codesourcery.com>
1266 * infrun.c (handle_inferior_event): Clear trap_expected after
1267 stepping past a single-step breakpoint.
1269 2009-07-28 Joseph Myers <joseph@codesourcery.com>
1271 * arm-tdep.c (enum arm_vfp_cprc_base_type,
1272 arm_vfp_cprc_unit_length, arm_vfp_cprc_reg_char,
1273 arm_vfp_cprc_sub_candidate, arm_vfp_call_candidate,
1274 arm_vfp_abi_for_function): New.
1275 (arm_push_dummy_call): Handle VFP ABI.
1276 (arm_extract_return_value, arm_store_return_value): Handle
1278 (arm_return_value): Handle VFP ABI.
1279 (arm_gdbarch_init): Default fp_model based on Tag_ABI_VFP_args for
1282 2009-07-28 Daniel Jacobowitz <dan@codesourcery.com>
1284 * arch-utils.c (displaced_step_at_entry_point): Do not call
1285 gdbarch_convert_from_func_ptr_addr.
1286 * cris-tdep.c: Remove outdated comment.
1287 * infcall.c (call_function_by_hand): Do not call
1288 gdbarch_convert_from_func_ptr_addr after entry_point_address.
1289 * objfiles.c (entry_point_address): Call both
1290 gdbarch_convert_from_func_ptr_addr and
1291 gdbarch_addr_bits_remove.
1293 2009-07-28 Aleksandar Ristovski <aristovski@qnx.com>
1295 * nto-tdep.c (nto_thread_state_str): New array.
1296 (nto_extra_thread_info): New function definition.
1297 * nto-tdep.h (gdbthread.h): New include.
1298 (private_thread_info): New struct.
1299 (nto_extra_thread_info): New declaration.
1300 * nto-procfs.c (procfs_thread_alive): Properly check if
1301 thread is still alive.
1302 (update_thread_private_data_name, update_thread_private_data): New
1303 function definition.
1304 (procfs_find_new_threads): Fetch thread private data.
1305 (init_procfs_ops): Register to_extra_thread_info.
1307 2009-07-25 Pedro Alves <pedro@codesourcery.com>
1309 * stack.c (backtrace_command_1): Remove dead check of NULL current
1312 2009-07-23 Keith Seitz <keiths@redhat.com>
1314 * source.c (forward_search_command): Don't fclose the stream,
1315 just run the cleanups.
1316 (reverse_search_command): Likewise.
1318 2009-07-23 Paul Pluzhnikov <ppluzhnikov@google.com>
1320 * symtab.c (search_symbols): Add QUIT.
1322 2009-07-22 Paul Pluzhnikov <ppluzhnikov@google.com>
1324 * symfile.c (symbol_file_add_with_addrs_or_offsets): Call observer.
1326 2009-07-22 Paul Pluzhnikov <ppluzhnikov@google.com>
1328 * objfiles.h (objfiles_changed): New prototype.
1329 * objfiles.c (objfiles_updated_p): Rename to objfiles_changed_p.
1330 (allocate_objfile, free_objfile): Must rebuild section map.
1331 (objfile_relocate): Likewise.
1332 (update_section_map, find_pc_section): Adjust.
1333 (set_objfiles_updated_on_exe_change): Remove.
1334 (set_objfiles_updated_on_solib_activity): Remove.
1335 (_initialize_objfiles): Remove.
1336 (objfiles_changed): New function.
1337 * symfile.c (reread_symbols): Call objfiles_changed.
1339 2009-07-22 Hui Zhu <teawater@gmail.com>
1341 * record.c (record_xfer_partial): Call error When nquery
1344 2009-07-21 Paul Pluzhnikov <ppluzhnikov@google.com>
1346 * objfiles.c (objfiles_updated_p): New variable.
1347 (qsort_cmp, bsearch_cmp, update_section_map): New function.
1348 (find_pc_section): Use bsearch.
1349 (set_objfiles_updated_on_exe_change): New function.
1350 (set_objfiles_updated_on_solib_activity): New function.
1351 (_initialize_objfiles): New function.
1353 2009-07-21 Michael Eager <eager@eagercon.com>
1355 * features/rs6000/powerpc-405.xml: New.
1356 * rs6000-tdep.c: Add include & initialize for
1357 powerpc-405.c, add 405 to variants.
1358 * features/rs6000/powerpc-405.c: Generate.
1360 2009-07-21 Paul Pluzhnikov <ppluzhnikov@google.com>
1362 * utils.c (internal_vproblem): Always print failure message.
1364 2009-07-21 Daniel Jacobowitz <dan@codesourcery.com>
1365 Vladimir Prus <vladimir@codesourcery.com>
1367 * valops.c (value_fetch_lazy): Handle bitfields explicitly.
1368 (value_assign): Remove unnecessary FIXME. Honor the container
1369 type of bitfields if possible.
1370 * value.c (struct value): Add parent field.
1371 (value_parent): New function.
1372 (value_free): Free the parent also.
1373 (value_copy): Copy the parent also.
1374 (value_primitive_field): Do not read the contents of a lazy
1375 value to create a child bitfield value. Set bitpos and offset
1376 according to the container type if possible.
1377 (unpack_bits_as_long): Rename from unpack_field_as_long. Take
1378 field_type, bitpos, and bitsize instead of type and fieldno.
1379 (unpack_field_as_long): Use unpack_bits_as_long.
1380 * value.h (value_parent, unpack_bits_as_long): New prototypes.
1382 2009-07-21 Daniel Jacobowitz <dan@codesourcery.com>
1384 * value.c (struct value): Add reference_count field.
1385 (allocate_value_lazy): Initialize reference_count.
1386 (value_incref): New function.
1387 (value_free): Check the reference count.
1388 * value.h (value_incref): New prototype.
1390 2009-07-20 Marc Khouzam <marc.khouzam@ericsson.com>
1392 * utils.c (defaulted_query): Update comment and remove dead code.
1394 2009-07-20 Doug Evans <dje@google.com>
1396 Add support for "comdat types" from DWARF4.
1397 * dwarf2read.c (dwarf2_per_objfile): New member types,
1399 (TYPES_SECTION): New macro.
1400 (dwarf2_per_cu_data): Change size of length field from 30 bits
1401 to 29 bits. New member from_debug_types.
1402 (signatured_type): New struct.
1403 (struct attribute): New union member signatured_type.
1404 (DW_SIGNATURED_TYPE): New macro.
1405 (dwarf2_attr_no_follow): New function.
1406 (read_type_unit_scope): New function.
1407 (follow_die_ref_or_sig, follow_die_sig): New functions.
1408 (dwarf2_locate_sectoins): Handle .debug_types.
1409 (dwarf2_build_psymtabs): Read .debug_types.
1410 (read_type_comp_unit_head): New function.
1411 (hash_type_signature, eq_type_signature): New functions.
1412 (create_debug_types_hash_table): New function.
1413 (lookup_signatured_type): New function.
1414 (process_psymtab_comp_unit): Handle type units too.
1415 (process_type_comp_unit, build_type_psymtabs): New functions.
1416 (dwarf2_build_psymtabs_hard): Call build_type_psymtabs.
1417 (load_partial_comp_unit): Assert not called for a type unit.
1418 (skip_one_die): Handle DW_FORM_sig8.
1419 (queue_comp_unit): Don't call load_full_comp_unit here, or
1420 update read_in_chain.
1421 (psymtab_to_symtab_1): Call read_signatured_type_at_offset for
1422 type units, or load_full_comp_unit for comp units after
1423 queue_comp_unit returns.
1424 (load_full_comp_unit): Assert not called for type units.
1425 (load_full_comp_unit): Update read_in_chain here.
1426 (process_die): Handle DW_TAG_type_unit.
1427 (read_structure_type): Look for signatured types.
1428 (read_enumeration_type): Ditto.
1429 (init_cu_die_reader): Handle .debug_types.
1430 (read_comp_unit): Assert hash not computed yet.
1431 (read_die_and_children): Expand debugging printf to handle .debug_types.
1432 (read_partial_die): Handle DW_TAG_type_unit:
1433 (find_patial_die): Handle .debug_types.
1434 (read_attribute_value): Handle DW_FORM_sig8.
1435 (die_type): Call follow_die_ref_or_sig instead of follow_die_ref.
1436 (die_containing_type): Ditto.
1437 (dwarf_tag_name): Handle DW_TAG_type_unit.
1438 (dwarf_attr_name): Handle DW_AT_signature.
1439 (dwarf_form_name): Handle DW_FORM_sec_offset, DW_FORM_exprloc,
1440 DW_FORM_flag_present, DW_FORM_sig8.
1441 (dump_die_shallow): Handlel DW_FORM_sig8.
1442 (maybe_queue_comp_unit): Change return type to int from void.
1443 All callers updated.
1444 (follow_die_ref): Handle .debug_types.
1445 (lookup_signatured_type_at_offset): New function.
1446 (read_signatured_type_at_offset): New function.
1447 (read_signatured_type): New function.
1449 2009-07-20 Ulrich Weigand <uweigand@de.ibm.com>
1451 * arch-utils.c (gdbarch_info_fill): Only reference GDB_OSABI_DEFAULT
1452 if the macro is defined.
1454 2009-07-20 Pedro Alves <pedro@codesourcery.com>
1456 * features/gdb-target.dtd (target): Accept an optional 'osabi'
1458 (osabi): Define element.
1459 * features/mips-linux.xml (target): Add an osabi subelement set to
1461 * regformats/regdat.sh (xmlarch, xmlosabi): New variables. Don't
1462 write the architecture into $xmltarget. Store it in $xmlarch.
1463 Handle the 'osabi' type. Handle outputting the osabi element of
1464 the target description.
1465 * regformats/reg-x86-64-linux.dat (osabi): Set to GNU/Linux.
1466 * regformats/reg-i386-linux.dat (osabi): Set to GNU/Linux.
1468 * target-descriptions.h (tdesc_osabi, set_tdesc_osabi): Declare.
1469 * target-descriptions.c (struct target_desc) <osabi>: New field.
1470 (tdesc_osabi): New function.
1471 (set_tdesc_osabi): New function.
1472 * xml-tdesc.c: Include osabi.h.
1473 (tdesc_end_osabi): New.
1474 (target_children): Parse "osabi" elements.
1475 * arch-utils.c (gdbarch_info_fill): Try to get the osabi from the
1476 target description if the user didn't override it or it is not
1477 extractable from the bfd. If that still fails, fallback to the
1478 configured in default.
1479 * osabi.h (osabi_from_tdesc_string): Declare.
1480 * osabi.c (osabi_from_tdesc_string): New.
1481 (gdbarch_lookup_osabi): Return GDB_OSABI_UNKNOWN instead of
1484 * NEWS: Mention that target descriptions can now describe the
1487 2009-07-20 Mike Frysinger <vapier@gentoo.org>
1489 * configure.ac (AC_CHECK_FUNCS): Check for pipe.
1490 * config.in, configure: Regenerate.
1491 * tui/tui-io.c (TUI_USE_PIPE_FOR_READLINE): Define if HAVE_PIPE.
1493 2009-07-20 Pedro Alves <pedro@codesourcery.com>
1495 * gnu-nat.c: Include "inf-child.h".
1496 (gnu_mourn_inferior): Use the passed in target_ops
1497 instead of the gnu_ops global.
1498 (gnu_create_inferior): Inline `attach_to_child', use the passed in
1499 target_ops instead of the gnu_ops global.
1500 (gnu_can_run): Delete.
1501 (gnu_attach): Use the passed in target_ops instead of the gnu_ops
1503 (gnu_detach): Ditto.
1504 (gnu_prepare_to_store, gnu_open): Delete.
1505 (gnu_store_registers, gnu_fetch_registers): Delete declarations.
1507 (init_gnu_ops): Delete.
1509 (_initialize_gnu_nat): Don't call init_gnu_ops or add_target here.
1510 * gnu-nat.h (gnu_target): Declare.
1511 * i386gnu-nat.c (gnu_fetch_registers, gnu_store_registers): Make
1513 (_initialize_i386gnu_nat): New.
1515 2009-07-20 Ulrich Weigand <uweigand@de.ibm.com>
1517 * dwarf2loc.c (find_location_expression): Retrieve beginning and
1518 ending address offsets in location list entries as integers,
1521 2009-07-20 Ulrich Weigand <uweigand@de.ibm.com>
1523 * infrun.c (wait_for_inferior): Invalidate registers and overlay
1524 cache every time before calling target_wait.
1525 (handle_inferior_event): Make static. Always reset waiton_ptid.
1526 Never call registers_changed.
1527 (prepare_to_wait): Do not invaliate registers or overlay cache
1528 (moved to wait_for_inferior). Do not reset waiton_ptid (moved
1529 to handle_inferior_event).
1530 (fetch_inferior_event): Remove check for always-true condition.
1532 2009-07-20 Thomas Schwinge <tschwinge@gnu.org>
1534 * i386gnu-nat.c (gnu_fetch_registers, gnu_store_registers): Adjust to
1535 2009-02-23 target_ops changes.
1537 2009-07-18 Michael Snyder <msnyder@vmware.com>
1539 * infrun.c (handle_inferior_event): Remove an execution_direction
1540 check in the "check for subroutine calls" test, and add some
1541 additional handling for reverse-stepping through shared libraries.
1543 2009-07-18 Anthony Green <green@moxielogic.com>
1545 * moxie-tdep.c (moxie_analyze_prologue): Take gdbarch as last
1546 parameter instead of frame_info.
1547 (moxie_frame_cache): Call moxie_analyze_prologue with different
1550 2009-07-17 Ulrich Weigand <uweigand@de.ibm.com>
1552 * solib.c (solib_bfd_open): Do not call ops->bfd_open.
1553 (solib_map_sections): Call ops->bfd_open instead of solib_bfd_open.
1554 * solib-frv.c (_initialize_frv_solib): Initialize bfd_open member.
1555 * solib-irix.c (_initialize_irix_solib): Likewise.
1556 * solib-null.c (_initialize_null_solib): Likewise.
1557 * solib-osf.c (_initialize_osf_solib): Likewise.
1558 * solib-pa64.c (_initialize_pa64_solib): Likewise.
1559 * solib-som.c (_initialize_som_solib): Likewise.
1560 * solib-sunos.c (_initialize_sunos_solib): Likewise.
1561 * solib-svr4.c (_initialize_svr4_solib): Likewise.
1562 * solib-target.c (_initialize_solib_target): Likewise.
1564 2009-07-17 Ulrich Weigand <uweigand@de.ibm.com>
1566 * mi/mi-cmd-disas.c (mi_cmd_disassemble): Respect mixed_mode flag.
1568 2009-07-16 Doug Evans <dje@google.com>
1570 * linux-thread.db.c (try_thread_db_load_1): Tweak comment.
1572 2007-07-16 Paul Pluzhnikov <ppluzhnikov@google.com>
1574 * linux-thread-db.c (thread_db_find_new_threads_silently):
1576 (try_thread_db_load_1): Call it.
1578 2009-07-15 Doug Evans <dje@google.com>
1580 Code reorg in preparation for adding comdat types support.
1581 * dwarf2read.c (struct die_reader_specs): New struct.
1582 (locate_pdi_sibling): New arg buffer. All callers updated.
1583 (load_partial_dies, read_partial_die): Ditto.
1584 (read_8_bytes): Change return type to ULONGEST.
1585 (read_comp_unit): Delete arg abfd. All callers updated.
1586 (read_die_and_children_1): Delete args abfd, cu. New arg reader.
1587 All callers updated.
1588 (read_die_and_children, read_die_and_siblings): Ditto.
1589 (read_full_die): Ditto. Move closer to callers.
1590 (skip_one_die): New arg buffer. All callers updated.
1591 (load_full_comp_unit): Change return type to void. All callers
1593 (partial_read_comp_unit_head): New args buffer, buffer_size.
1594 All callers updated.
1595 (process_psymtab_comp_unit): New function, split out from
1596 dwarf2_build_psymtabs_hard.
1597 (dwarf2_build_psymtabs_hard): Call it.
1598 (load_partial_comp_unit): Renamed from load_comp_unit.
1599 All callers updated.
1600 (skip_children): New arg buffer. All callers updated.
1601 (init_cu_die_reader): New function.
1602 (is_ref_attr): New function.
1603 (dwarf2_get_ref_die_offset): Call it.
1604 (alloc_one_comp_unit): New function.
1606 2009-07-14 Stan Shebs <stan@codesourcery.com>
1608 * MAINTAINERS (Global Maintainers): Add Doug Evans.
1610 2009-07-14 Stan Shebs <stan@codesourcery.com>
1612 Conditional tracepoints.
1613 * ax-gdb.h (gen_eval_for_expr): Declare.
1614 * ax-gdb.c (gen_expr): Generate bytecodes for BINOP_EQUAL
1615 and other comparisons.
1616 (gen_eval_for_expr): New function.
1617 (agent_eval_command): New maintenance command.
1618 (_initialize_ax_gdb): Define the command.
1619 * remote.c (struct remote_state): New field cond_tracepoints.
1620 (PACKET_ConditionalTracepoints): New packet config type.
1621 (remote_cond_tracepoint_feature): New function.
1622 (remote_protocol_features): Add ConditionalTracepoints.
1623 (remote_supports_cond_tracepoints): New function.
1624 (_initialize_remote): Add ConditionalTracepoints.
1625 * tracepoint.c (download_tracepoint): Add conditional.
1626 * NEWS: Mention conditional tracepoints.
1628 2009-07-14 Ulrich Weigand <uweigand@de.ibm.com>
1630 * objfiles.c (objfile_relocate): Do not relocate the same
1631 BLOCKVECTOR_MAP address map multiple times.
1633 2009-07-14 Ulrich Weigand <uweigand@de.ibm.com>
1635 * remote.c (process_stop_reply): Access expedited target registers
1638 2009-07-13 Jan Kratochvil <jan.kratochvil@redhat.com>
1640 Fix memory access from signed 32bit inferior registers on 64bit GDB.
1641 * linux-nat.c (linux_xfer_partial <TARGET_OBJECT_MEMORY>): New variable
1642 addr_bit. Mask OFFSET by the ADDR_BIT width.
1644 2009-07-13 Anthony Green <green@moxielogic.com>
1646 * moxie-tdep.c (moxie_gdbarch_init): Call
1647 set_gdbarch_process_record.
1648 (moxie_process_record): New.
1649 (moxie_process_readu): New.
1651 2009-07-12 Michael Snyder <msnyder@vmware.com>
1653 * i386-tdep.c: Add a frame unwinder for function epilogues.
1654 (i386_in_function_epilogue_p): New function.
1655 (i386_epilogue_frame_sniffer): New function.
1656 (i386_epilogue_frame_cache): New function.
1657 (i386_epilogue_frame_this_id): New function.
1658 (i386_epilogue_frame_unwind): New struct frame_unwind.
1659 (i386_gdbarch_init): Hook the new unwinder.
1661 2009-07-11 Hui Zhu <teawater@gmail.com>
1663 * cli/cli-cmds.c (disassemble_command): Add a new modifier /r
1664 to "disassemble" command to print the raw instructions in hex as
1665 well as in symbolic form.
1666 (init_cli_cmds): Ditto.
1667 (print_disassembly): Change "mixed" to "flags" to translate
1668 the behavior of disassemble.
1669 (disassemble_current_function): Ditto.
1670 * mi/mi-cmd-disas.c (mi_cmd_disassemble): Ditto.
1671 * stack.c (gdb_disassembly_stub): Ditto.
1672 * disasm.c (do_mixed_source_and_assembly): Ditto.
1673 (do_mixed_source_and_assembly): Ditto.
1674 (do_assembly_only): Ditto.
1675 (gdb_disassembly): Ditto.
1676 (dump_insns): print the raw instructions in hex as well as in
1677 symbolic form if DISASSEMBLY_RAW_INSN and flags is true.
1678 * disasm.h (DISASSEMBLY_SOURCE): Include source code with the
1679 assembly if it and flags is true.
1680 (DISASSEMBLY_RAW_INSN): Include the raw instructions in hex with
1681 the assembly if it and flags is true.
1682 (gdb_disassembly): Update extern.
1683 * NEWS: Document disassemble/r support.
1685 2009-07-10 Tom Tromey <tromey@redhat.com>
1687 * dwarf2-frame.c: Include dwarf2.h, not elf/dwarf2.h.
1688 * dwarf2expr.c: Likewise.
1689 * dwarf2loc.c: Likewise.
1690 * dwarf2read.c: Likewise.
1691 * sh-tdep.c: Likewise.
1692 * xtensa-tdep.c: Likewise.
1694 2009-07-10 Jan Kratochvil <jan.kratochvil@redhat.com>
1697 * mi/mi-cmd-var.c (mi_cmd_var_update): Remove variable nv. Move
1698 variables var, rootlist and cr to their local sub-block. Move the
1699 make_cleanup_ui_out_tuple_begin_end, make_cleanup_ui_out_list_begin_end
1700 and do_cleanups calls to the common base block. Remove the zero NV
1703 2009-07-10 Phil Muldoon <pmuldoon@redhat.com>
1705 * python/python-internal.h (apply_varobj_pretty_printer): Update
1707 (python_string_to_target_python_string): Add definition.
1708 * python/python-utils.c (unicode_to_encoded_python_string)
1709 (unicode_to_target_python_string)
1710 (python_string_to_target_python_string): New Functions.
1711 * python/python-prettyprint.c (pretty_print_one_value): Likewise.
1712 (print_string_repr): Refactor to logic to account for PyObject
1714 (apply_varobj_pretty_printer): Likewise.
1715 * python/python-value.c (valpy_string): Parse length keyword. Use
1716 length keyword in LA_GET_STRING.
1717 * varobj.c (value_get_print_value): Refactor logic to account for
1718 PyObject returned strings.
1719 * c-lang.c (c_get_string): If the length parameter is specified,
1720 use that. Return value in characters. Update comments.
1721 * language.h: Update c_get_string prototype comments.
1723 2009-07-09 Doug Evans <dje@google.com>
1725 * i386-tdep.c (i386_displaced_step_fixup): Fix order of arguments
1726 to read_memory_unsigned_integer.
1728 2009-07-09 Jan Kratochvil <jan.kratochvil@redhat.com>
1730 Report error on inaccessible memory.
1731 * cli/cli-dump.c: Include gdbcore.h.
1732 (dump_memory_to_file): Call read_memory instead of target_read_memory.
1734 2009-07-09 Hui Zhu <teawater@gmail.com>
1736 * solib.c (solib_bfd_open): Output a warning if solib's
1737 architecture is not compatible with inferior's architecture.
1739 2009-07-09 Ulrich Weigand <uweigand@de.ibm.com>
1740 Jan Kratochvil <jan.kratochvil@redhat.com>
1742 * target.h (struct target_ops <to_thread_architecture>): Describe it.
1743 (target_thread_architecture): Refer to to_thread_architecture.
1745 2009-07-08 Pierre Muller <muller@ics.u-strasbg.fr>
1747 * cli/cli-cmds.c (init_cli_cmds): Add "inf" alias for "info" command.
1749 2009-07-07 Ulrich Weigand <uweigand@de.ibm.com>
1751 * tui/tui-stack.c (tui_make_status_line): Display PC as ?? if unknown.
1753 2009-07-07 Pierre Muller <muller@ics.u-strasbg.fr>
1755 * breakpoint.c (set_raw_breakpoint): Remove static modifier.
1757 2009-07-07 Tom Tromey <tromey@redhat.com>
1759 * c-lang.c (convert_octal): Only allow 3 octal digits.
1760 (print_wchar): Prefer 3-digit octal form. Fall back to hex if
1762 * c-exp.y (c_parse_escape): Only allow 3 octal digits.
1764 2009-07-07 Paul Pluzhnikov <ppluzhnikov@google.com>
1766 * python/python-value.c (valpy_getitem): Remove incorrect assert.
1768 2009-07-07 Paul Pluzhnikov <ppluzhnikov@google.com>
1770 * python/python-value.c (valpy_getitem): Don't return from TRY_CATCH.
1772 2009-07-07 Sami Wagiaalla <swagiaal@redhat.com>
1774 * cp-support.h (struct using_direct): Rename members inner and
1775 outer to import_src, and import_dest respectively.
1776 * cp-namespace.c (cp_add_using_directive): Update.
1777 (cp_add_using): Update.
1778 (cp_copy_usings): Update.
1779 (cp_lookup_symbol_namespace): Update.
1780 (cp_scan_for_anonymous_namespaces): Update.
1781 * cp-support.c (make_symbol_overload_list_using): Update.
1782 * cp-support.h (cp_add_using_directive, cp_add_using): Rename
1783 arguments from inner and outer to src and dest respectively.
1784 * cp-namespace.c (cp_add_using_directive): Ditto.
1785 (cp_add_using): Ditto.
1787 2009-07-07 Jan Kratochvil <jan.kratochvil@redhat.com>
1789 * mi/mi-cmd-var.c (mi_cmd_var_update): Replace a while loop by for loop.
1790 * varobj.c (varobj_invalidate): Replace a while loop by for loop.
1792 2009-07-07 Vladimir Prus <vladimir@codesourcery.com>
1794 Fix hang in floating varobjs.
1796 * varobj.c (varobj_invalidate): Advance to next
1797 element when processing floating varobj.
1799 2009-07-07 Vladimir Prus <vladimir@codesourcery.com>
1801 * varobj.c: Remove unnecessary include.
1803 2009-07-07 Tristan Gingold <gingold@adacore.com>
1805 * config/i386/darwin.mh (NATDEPFILES): Remove excServer.o.
1806 Remove excServer.c target. Remove _all target.
1807 * darwin.defs: Removed.
1809 2009-07-06 Aleksandar Ristovski <aristovski@qnx.com>
1811 * configure.tgt (i[34567]86-*-nto*): Add build_gdbserver=yes.
1813 2009-07-06 Jan Kratochvil <jan.kratochvil@redhat.com>
1815 * source.c (find_and_open_source): Remove the `objfile' parameter.
1816 Update the function comment.
1817 (open_source_file, symtab_to_fullname, psymtab_to_fullname): Update the
1818 find_and_open_source callers.
1820 2009-07-05 Pedro Alves <pedro@codesourcery.com>
1822 * coff-pe-read.c (read_pe_exported_syms): Recognize
1823 "pe-arm-wince-little" and "pei-arm-wince-little" bfd targets as PE
1826 2009-07-05 Pedro Alves <pedro@codesourcery.com>
1828 * arm-wince-tdep.c (arm_wince_skip_main_prologue): New.
1829 (arm_wince_init_abi): Register it as gdbarch_skip_main_prologue
1832 2009-06-29 Tristan Gingold <gingold@adacore.com>
1834 * i386-darwin-tdep.c (amd64_darwin_thread_state_reg_offset)
1835 (amd64_darwin_thread_state_num_regs)
1836 (amd64_darwin_sigcontext_addr, x86_darwin_init_abi_64): Moved to
1838 (_initialize_i386_darwin_tdep): Remove 64 bits parts.
1839 (darwin_dwarf_signal_frame_p): Make public.
1840 * amd64-darwin-tdep.c: New file with most chunks from
1842 * i386-darwin-tdep.h: Add a prototype for darwin_dwarf_signal_frame_p.
1843 (amd64_darwin_thread_state_reg_offset)
1844 (amd64_darwin_thread_state_num_regs): Moved to amd64-darwin-tdep.h
1845 * amd64-darwin-tdep.h: New file.
1846 * i386-darwin-nat.c: Only includes amd64-nat.h and amd64-darwin-tdep.h
1847 if BFD64 is defined.
1848 (i386_darwin_fetch_inferior_registers): Add #ifdef BFD64/#endif around
1850 (i386_darwin_store_inferior_registers): Ditto.
1851 (darwin_set_sstep): Ditto.
1852 (darwin_complete_target): Ditto.
1853 (amd64_darwin_sstep_at_sigreturn): Ditto.
1854 * configure.tgt: Create a separate entry for x86_64-*-darwin.
1855 Add 64 bits support for i386-*-darwin if --enable-64-bit-bfd.
1856 * Makefile.in (ALLDEPFILES): Add amd64-darwin-tdep.c, darwin-nat.c,
1857 i386-darwin-tdep.c i386-darwin-nat.c
1858 (ALL_64_TARGET_OBS): Add amd64-darwin-tdep.o
1860 2009-07-02 Pedro Alves <pedro@codesourcery.com>
1862 * linux-fork.c (forks_exist_p): Drop unnecessary extern.
1863 (add_fork, linux_fork_killall, linux_fork_mourn_inferior)
1864 (linux_fork_detach): Ditto.
1865 (delete_fork_command): Rename to ...
1866 (delete_checkpoint_command): ... this.
1867 (detach_fork_command): Rename to ...
1868 (detach_checkpoint_command): ... this.
1869 (info_forks_command): Rename to ...
1870 (info_checkpoints_command): ... this.
1871 (_initialize_linux_fork): Remove stale comments. Adjust.
1873 2009-07-02 Pedro Alves <pedro@codesourcery.com>
1875 * linux-nat.c (linux_child_follow_fork): If we're staying attached
1876 to the child process, enable event reporting on it. Don't handle
1877 checkpoints here. Instead, add the child fork to the lwp thread
1878 and inferior lists without clobbering the previous inferior. Let
1879 the thread_db layer learn about a new child process, even if
1880 following the parent.
1881 (linux_nat_switch_fork): Delete lwps of the current inferior only,
1882 instead of clearing the whole list. Use thread_change_ptid to
1883 give the core the illusion the new checkpoint is still the same
1884 inferior. Clear the register cache.
1885 (linux_handle_extended_wait): Handle checkpoints here.
1886 (linux_multi_process): Turn on.
1887 * linux-fork.c (struct fork_info) <pc>: Remove field.
1888 (init_fork_list): Do not delete the checkpoint from the inferior
1889 list (it is not there).
1890 (fork_load_infrun_state): Don't switch inferior_ptid here. Pass
1891 the new checkpoint's ptid to linux_nat_switch_fork.
1892 (fork_save_infrun_state): Make static. Don't stop the pc field of
1893 fork_info, it's gone.
1894 (linux_fork_mourn_inferior): Don't delete the checkpoint from the
1895 inferior list, it's not there.
1896 (linux_fork_detach): Ditto.
1897 (delete_fork_command): Replace mention of fork/checkpoint by
1899 (detach_fork_command): Likewise. Don't delete the checkpoint from
1901 (info_forks_command): Adjust.
1902 (restore_detach_fork): Delete.
1903 (checkpointing_pid): New.
1904 (linux_fork_checkpointing_p): New.
1905 (save_detach_fork): Delete.
1906 (checkpoint_command): Delete temp_detach_fork. Don't remove
1907 breakpoints, that's a nop. Store the pid of the process we're
1908 checkpointing, and use make_cleanup_restore_integer to restore it.
1909 Don't reinsert breakpoints here.
1910 (process_command, fork_command): Delete.
1911 (restart_command): Update comments to only mention checkpoints,
1913 (_initialize_linux_fork): Delete "fork", "process", "info forks"
1915 * linux-fork.h (fork_save_infrun_state, fork_list): Delete
1917 (linux_fork_checkpointing_p): Declare.
1918 * cli/cli-cmds.c (killlist): New.
1919 * cli/cli-cmds.h (killlist): Declare.
1920 * gdbcmd.h (killlist): Declare.
1921 * inferior.c: Include "gdbthread.h".
1922 (detach_inferior_command, kill_inferior_command)
1923 (inferior_command): New.
1924 (info_inferiors_command): Allow specifying a specific inferior id.
1925 (_initialize_inferiors): Register "inferior", "kill inferior" and
1926 "detach inferior" commands.
1927 * infcmd.c (_initialize_infcmd): Make "kill" a prefix command.
1928 * gdbthread.h (any_thread_of_process): Declare.
1929 * thread.c (any_thread_of_process): New.
1931 * NEWS: Mention multi-inferior debugging. Mention 'info
1932 inferiors', 'inferior', 'detach inferior' and 'kill inferior' as
1934 (Removed commands): New section, mentioning that 'info forks',
1935 'fork', 'process', 'delete fork' and 'detach fork' are now gone.
1937 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
1939 * gdbarch.sh (current_gdbarch): Remove global variable.
1940 (find_arch_by_info): Remove, inline into ...
1941 (gdbarch_find_by_info): ... this. Remove current_gdbarch swapping.
1942 (deprecated_current_gdbarch_select_hack): Rename to ...
1943 (deprecated_target_gdbarch_select_hack): ... this. Do not set
1944 or access current_gdbarch.
1945 * gdbarch.c, gdbarch.h: Regenerate.
1947 * arch-utils.c (gdbarch_update_p): Update call.
1948 (set_gdbarch_from_file): Likewise.
1950 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
1952 * defs.h (extract_signed_integer, extract_unsigned_integer,
1953 extract_long_unsigned_integer, store_signed_integer,
1954 store_unsigned_integer): Add BYTE_ORDER parameter.
1955 * findvar.c (extract_signed_integer, extract_unsigned_integer,
1956 extract_long_unsigned_integer, store_signed_integer,
1957 store_unsigned_integer): Add BYTE_ORDER parameter. Use it
1958 instead of current_gdbarch.
1960 * gdbcore.h (read_memory_integer, safe_read_memory_integer,
1961 read_memory_unsigned_integer, write_memory_signed_integer,
1962 write_memory_unsigned_integer): Add BYTE_ORDER parameter.
1963 * corefile.c (struct captured_read_memory_integer_arguments): Add
1965 (safe_read_memory_integer): Add BYTE_ORDER parameter. Store it into
1966 struct captured_read_memory_integer_arguments.
1967 (do_captured_read_memory_integer): Pass it to read_memory_integer.
1968 (read_memory_integer): Add BYTE_ORDER parameter. Pass it to
1969 extract_signed_integer.
1970 (read_memory_unsigned_integer): Add BYTE_ORDER parameter. Pass it to
1971 extract_unsigned_integer.
1972 (write_memory_signed_integer): Add BYTE_ORDER parameter. Pass it
1973 to store_signed_integer.
1974 (write_memory_unsigned_integer): Add BYTE_ORDER parameter. Pass it
1975 to store_unsigned_integer.
1977 * target.h (get_target_memory_unsigned): Add BYTE_ORDER parameter.
1978 * target.c (get_target_memory_unsigned): Add BYTE_ORDER parameter.
1979 Pass it to extract_unsigned_integer.
1982 Update calls to extract_signed_integer, extract_unsigned_integer,
1983 extract_long_unsigned_integer, store_signed_integer,
1984 store_unsigned_integer, read_memory_integer,
1985 read_memory_unsigned_integer, safe_read_memory_integer,
1986 write_memory_signed_integer, write_memory_unsigned_integer, and
1987 get_target_memory_unsigned to pass byte order:
1988 * ada-lang.c (ada_value_binop): Update.
1989 * ada-valprint.c (char_at): Update.
1990 * alpha-osf1-tdep.c (alpha_osf1_sigcontext_addr): Update.
1991 * alpha-tdep.c (alpha_lds, alpha_sts, alpha_push_dummy_call,
1992 alpha_extract_return_value, alpha_read_insn,
1993 alpha_get_longjmp_target): Update.
1994 * amd64-linux-tdep.c (amd64_linux_sigcontext_addr): Update.
1995 * amd64obsd-tdep.c (amd64obsd_supply_uthread,
1996 amd64obsd_collect_uthread, amd64obsd_trapframe_cache): Update.
1997 * amd64-tdep.c (amd64_push_dummy_call, amd64_analyze_prologue,
1998 amd64_frame_cache, amd64_sigtramp_frame_cache, fixup_riprel,
1999 amd64_displaced_step_fixup): Update.
2000 * arm-linux-tdep.c (arm_linux_sigreturn_init,
2001 arm_linux_rt_sigreturn_init, arm_linux_supply_gregset): Update.
2002 * arm-tdep.c (thumb_analyze_prologue, arm_skip_prologue,
2003 arm_scan_prologue, arm_push_dummy_call, thumb_get_next_pc,
2004 arm_get_next_pc, arm_extract_return_value, arm_store_return_value,
2005 arm_return_value): Update.
2006 * arm-wince-tdep.c (arm_pe_skip_trampoline_code): Update.
2007 * auxv.c (default_auxv_parse): Update.
2008 * avr-tdep.c (avr_address_to_pointer, avr_pointer_to_address,
2009 avr_scan_prologue, avr_extract_return_value,
2010 avr_frame_prev_register, avr_push_dummy_call): Update.
2011 * bsd-uthread.c (bsd_uthread_check_magic, bsd_uthread_lookup_offset,
2012 bsd_uthread_wait, bsd_uthread_thread_alive,
2013 bsd_uthread_extra_thread_info): Update.
2014 * c-lang.c (c_printstr, print_wchar): Update.
2015 * cp-valprint.c (cp_print_class_member): Update.
2016 * cris-tdep.c (cris_sigcontext_addr, cris_sigtramp_frame_unwind_cache,
2017 cris_push_dummy_call, cris_scan_prologue, cris_store_return_value,
2018 cris_extract_return_value, find_step_target, dip_prefix,
2019 sixteen_bit_offset_branch_op, none_reg_mode_jump_op,
2020 move_mem_to_reg_movem_op, get_data_from_address): Update.
2021 * dwarf2expr.c (dwarf2_read_address, execute_stack_op): Update.
2022 * dwarf2-frame.c (execute_cfa_program): Update.
2023 * dwarf2loc.c (find_location_expression): Update.
2024 * dwarf2read.c (dwarf2_const_value): Update.
2025 * expprint.c (print_subexp_standard): Update.
2026 * findvar.c (unsigned_pointer_to_address, signed_pointer_to_address,
2027 unsigned_address_to_pointer, address_to_signed_pointer,
2028 read_var_value): Update.
2029 * frame.c (frame_unwind_register_signed,
2030 frame_unwind_register_unsigned, get_frame_memory_signed,
2031 get_frame_memory_unsigned): Update.
2032 * frame-unwind.c (frame_unwind_got_constant): Update.
2033 * frv-linux-tdep.c (frv_linux_pc_in_sigtramp,
2034 frv_linux_sigcontext_reg_addr, frv_linux_sigtramp_frame_cache):
2036 * frv-tdep.c (frv_analyze_prologue, frv_skip_main_prologue,
2037 frv_extract_return_value, find_func_descr,
2038 frv_convert_from_func_ptr_addr, frv_push_dummy_call): Update.
2039 * f-valprint.c (f_val_print): Update.
2040 * gnu-v3-abi.c (gnuv3_decode_method_ptr, gnuv3_make_method_ptr):
2042 * h8300-tdep.c (h8300_is_argument_spill, h8300_analyze_prologue,
2043 h8300_push_dummy_call, h8300_extract_return_value,
2044 h8300h_extract_return_value, h8300_store_return_value,
2045 h8300h_store_return_value): Update.
2046 * hppabsd-tdep.c (hppabsd_find_global_pointer): Update.
2047 * hppa-hpux-nat.c (hppa_hpux_fetch_register, hppa_hpux_store_register):
2049 * hppa-hpux-tdep.c (hppa32_hpux_in_solib_call_trampoline,
2050 hppa64_hpux_in_solib_call_trampoline,
2051 hppa_hpux_in_solib_return_trampoline, hppa_hpux_skip_trampoline_code,
2052 hppa_hpux_sigtramp_frame_unwind_cache,
2053 hppa_hpux_sigtramp_unwind_sniffer, hppa32_hpux_find_global_pointer,
2054 hppa64_hpux_find_global_pointer, hppa_hpux_search_pattern,
2055 hppa32_hpux_search_dummy_call_sequence,
2056 hppa64_hpux_search_dummy_call_sequence, hppa_hpux_supply_save_state,
2057 hppa_hpux_unwind_adjust_stub): Update.
2058 * hppa-linux-tdep.c (insns_match_pattern,
2059 hppa_linux_find_global_pointer): Update.
2060 * hppa-tdep.c (hppa_in_function_epilogue_p, hppa32_push_dummy_call,
2061 hppa64_convert_code_addr_to_fptr, hppa64_push_dummy_call,
2062 skip_prologue_hard_way, hppa_frame_cache, hppa_fallback_frame_cache,
2063 hppa_pseudo_register_read, hppa_frame_prev_register_helper,
2064 hppa_match_insns): Update.
2065 * hpux-thread.c (hpux_thread_fetch_registers): Update.
2066 * i386-tdep.c (i386bsd_sigcontext_addr): Update.
2067 * i386-cygwin-tdep.c (core_process_module_section): Update.
2068 * i386-darwin-nat.c (i386_darwin_sstep_at_sigreturn,
2069 amd64_darwin_sstep_at_sigreturn): Update.
2070 * i386-darwin-tdep.c (i386_darwin_sigcontext_addr,
2071 amd64_darwin_sigcontext_addr): Likewise.
2072 * i386-linux-nat.c (i386_linux_sigcontext_addr): Update.
2073 * i386nbsd-tdep.c (i386nbsd_sigtramp_cache_init): Update.
2074 * i386-nto-tdep.c (i386nto_sigcontext_addr): Update.
2075 * i386obsd-nat.c (i386obsd_supply_pcb): Update.
2076 * i386obsd-tdep.c (i386obsd_supply_uthread, i386obsd_collect_uthread,
2077 i386obsd_trapframe_cache): Update.
2078 * i386-tdep.c (i386_displaced_step_fixup, i386_follow_jump,
2079 i386_analyze_frame_setup, i386_analyze_prologue,
2080 i386_skip_main_prologue, i386_frame_cache, i386_sigtramp_frame_cache,
2081 i386_get_longjmp_target, i386_push_dummy_call,
2082 i386_pe_skip_trampoline_code, i386_svr4_sigcontext_addr,
2083 i386_fetch_pointer_argument): Update.
2084 * i387-tdep.c (i387_supply_fsave): Update.
2085 * ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Update.
2086 * ia64-tdep.c (ia64_pseudo_register_read, ia64_pseudo_register_write,
2087 examine_prologue, ia64_frame_cache, ia64_frame_prev_register,
2088 ia64_sigtramp_frame_cache, ia64_sigtramp_frame_prev_register,
2089 ia64_access_reg, ia64_access_rse_reg, ia64_libunwind_frame_this_id,
2090 ia64_libunwind_frame_prev_register,
2091 ia64_libunwind_sigtramp_frame_this_id,
2092 ia64_libunwind_sigtramp_frame_prev_register, ia64_find_global_pointer,
2093 find_extant_func_descr, find_func_descr,
2094 ia64_convert_from_func_ptr_addr, ia64_push_dummy_call, ia64_dummy_id,
2095 ia64_unwind_pc): Update.
2096 * iq2000-tdep.c (iq2000_pointer_to_address, iq2000_address_to_pointer,
2097 iq2000_scan_prologue, iq2000_extract_return_value,
2098 iq2000_push_dummy_call): Update.
2099 * irix5nat.c (fill_gregset): Update.
2100 * jv-lang.c (evaluate_subexp_java): Update.
2101 * jv-valprint.c (java_value_print): Update.
2102 * lm32-tdep.c (lm32_analyze_prologue, lm32_push_dummy_call,
2103 lm32_extract_return_value, lm32_store_return_value): Update.
2104 * m32c-tdep.c (m32c_push_dummy_call, m32c_return_value,
2105 m32c_skip_trampoline_code, m32c_m16c_address_to_pointer,
2106 m32c_m16c_pointer_to_address): Update.
2107 * m32r-tdep.c (m32r_store_return_value, decode_prologue,
2108 m32r_skip_prologue, m32r_push_dummy_call, m32r_extract_return_value):
2110 * m68hc11-tdep.c (m68hc11_pseudo_register_read,
2111 m68hc11_pseudo_register_write, m68hc11_analyze_instruction,
2112 m68hc11_push_dummy_call): Update.
2113 * m68linux-tdep.c (m68k_linux_pc_in_sigtramp,
2114 m68k_linux_get_sigtramp_info, m68k_linux_sigtramp_frame_cache):
2116 * m68k-tdep.c (m68k_push_dummy_call, m68k_analyze_frame_setup,
2117 m68k_analyze_register_saves, m68k_analyze_prologue, m68k_frame_cache,
2118 m68k_get_longjmp_target): Update.
2119 * m88k-tdep.c (m88k_fetch_instruction): Update.
2120 * mep-tdep.c (mep_pseudo_cr32_read, mep_pseudo_csr_write,
2121 mep_pseudo_cr32_write, mep_get_insn, mep_push_dummy_call): Update.
2122 * mi/mi-main.c (mi_cmd_data_write_memory): Update.
2123 * mips-linux-tdep.c (mips_linux_get_longjmp_target, supply_32bit_reg,
2124 mips64_linux_get_longjmp_target, mips64_fill_gregset,
2125 mips64_fill_fpregset, mips_linux_in_dynsym_stub): Update.
2126 * mipsnbdsd-tdep.c (mipsnbsd_get_longjmp_target): Update.
2127 * mips-tdep.c (mips_fetch_instruction, fetch_mips_16,
2128 mips_eabi_push_dummy_call, mips_n32n64_push_dummy_call,
2129 mips_o32_push_dummy_call, mips_o64_push_dummy_call,
2130 mips_single_step_through_delay, mips_skip_pic_trampoline_code,
2131 mips_integer_to_address): Update.
2132 * mn10300-tdep.c (mn10300_analyze_prologue, mn10300_push_dummy_call):
2134 * monitor.c (monitor_supply_register, monitor_write_memory,
2135 monitor_read_memory_single): Update.
2136 * moxie-tdep.c (moxie_store_return_value, moxie_extract_return_value,
2137 moxie_analyze_prologue): Update.
2138 * mt-tdep.c (mt_return_value, mt_skip_prologue, mt_select_coprocessor,
2139 mt_pseudo_register_read, mt_pseudo_register_write, mt_registers_info,
2140 mt_push_dummy_call): Update.
2141 * objc-lang.c (read_objc_method, read_objc_methlist_nmethods,
2142 read_objc_methlist_method, read_objc_object, read_objc_super,
2143 read_objc_class, find_implementation_from_class): Update.
2144 * ppc64-linux-tdep.c (ppc64_desc_entry_point,
2145 ppc64_linux_convert_from_func_ptr_addr, ppc_linux_sigtramp_cache):
2147 * ppcobsd-tdep.c (ppcobsd_sigtramp_frame_sniffer,
2148 ppcobsd_sigtramp_frame_cache): Update.
2149 * ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call,
2150 do_ppc_sysv_return_value, ppc64_sysv_abi_push_dummy_call,
2151 ppc64_sysv_abi_return_value): Update.
2152 * ppc-linux-nat.c (ppc_linux_auxv_parse): Update.
2153 * procfs.c (procfs_auxv_parse): Update.
2154 * p-valprint.c (pascal_val_print): Update.
2155 * regcache.c (regcache_raw_read_signed, regcache_raw_read_unsigned,
2156 regcache_raw_write_signed, regcache_raw_write_unsigned,
2157 regcache_cooked_read_signed, regcache_cooked_read_unsigned,
2158 regcache_cooked_write_signed, regcache_cooked_write_unsigned): Update.
2159 * remote-m32r-sdi.c (m32r_fetch_register): Update.
2160 * remote-mips.c (mips_wait, mips_fetch_registers, mips_xfer_memory):
2162 * rs6000-aix-tdep.c (rs6000_push_dummy_call, rs6000_return_value,
2163 rs6000_convert_from_func_ptr_addr, branch_dest,
2164 rs6000_software_single_step): Update.
2165 * rs6000-tdep.c (rs6000_in_function_epilogue_p,
2166 ppc_displaced_step_fixup, ppc_deal_with_atomic_sequence,
2167 bl_to_blrl_insn_p, rs6000_fetch_instruction, skip_prologue,
2168 rs6000_skip_main_prologue, rs6000_skip_trampoline_code,
2169 rs6000_frame_cache): Update.
2170 * s390-tdep.c (s390_pseudo_register_read, s390_pseudo_register_write,
2171 s390x_pseudo_register_read, s390x_pseudo_register_write, s390_load,
2172 s390_backchain_frame_unwind_cache, s390_sigtramp_frame_unwind_cache,
2173 extend_simple_arg, s390_push_dummy_call, s390_return_value): Update.
2174 * scm-exp.c (scm_lreadr): Update.
2175 * scm-lang.c (scm_get_field, scm_unpack): Update.
2176 * scm-valprint.c (scm_val_print): Update.
2177 * score-tdep.c (score_breakpoint_from_pc, score_push_dummy_call,
2178 score_fetch_inst): Update.
2179 * sh64-tdep.c (look_for_args_moves, sh64_skip_prologue_hard_way,
2180 sh64_analyze_prologue, sh64_push_dummy_call, sh64_extract_return_value,
2181 sh64_pseudo_register_read, sh64_pseudo_register_write,
2182 sh64_frame_prev_register): Update:
2183 * sh-tdep.c (sh_analyze_prologue, sh_push_dummy_call_fpu,
2184 sh_push_dummy_call_nofpu, sh_extract_return_value_nofpu,
2185 sh_store_return_value_nofpu, sh_in_function_epilogue_p): Update.
2186 * solib-darwin.c (darwin_load_image_infos): Update.
2187 * solib-frv.c (fetch_loadmap, lm_base, frv_current_sos, enable_break2,
2188 find_canonical_descriptor_in_load_object): Update.
2189 * solib-irix.c (extract_mips_address, fetch_lm_info, irix_current_sos,
2190 irix_open_symbol_file_object): Update.
2191 * solib-som.c (som_solib_create_inferior_hook, link_map_start,
2192 som_current_sos, som_open_symbol_file_object): Update.
2193 * solib-sunos.c (SOLIB_EXTRACT_ADDRESS, LM_ADDR, LM_NEXT, LM_NAME):
2195 * solib-svr4.c (read_program_header, scan_dyntag_auxv,
2196 solib_svr4_r_ldsomap): Update.
2197 * sparc64-linux-tdep.c (sparc64_linux_step_trap): Update.
2198 * sparc64obsd-tdep.c (sparc64obsd_supply_uthread,
2199 sparc64obsd_collect_uthread): Update.
2200 * sparc64-tdep.c (sparc64_pseudo_register_read,
2201 sparc64_pseudo_register_write, sparc64_supply_gregset,
2202 sparc64_collect_gregset): Update.
2203 * sparc-linux-tdep.c (sparc32_linux_step_trap): Update.
2204 * sparcobsd-tdep.c (sparc32obsd_supply_uthread,
2205 sparc32obsd_collect_uthread): Update.
2206 * sparc-tdep.c (sparc_fetch_wcookie, sparc32_push_dummy_code,
2207 sparc32_store_arguments, sparc32_return_value, sparc_supply_rwindow,
2208 sparc_collect_rwindow): Update.
2209 * spu-linux-nat.c (parse_spufs_run): Update.
2210 * spu-tdep.c (spu_pseudo_register_read_spu,
2211 spu_pseudo_register_write_spu, spu_pointer_to_address,
2212 spu_analyze_prologue, spu_in_function_epilogue_p,
2213 spu_frame_unwind_cache, spu_push_dummy_call, spu_software_single_step,
2214 spu_get_longjmp_target, spu_get_overlay_table, spu_overlay_update_osect,
2215 info_spu_signal_command, info_spu_mailbox_list, info_spu_dma_cmdlist,
2216 info_spu_dma_command, info_spu_proxydma_command): Update.
2217 * stack.c (print_frame_nameless_args, frame_info): Update.
2218 * symfile.c (read_target_long_array, simple_read_overlay_table,
2219 simple_read_overlay_region_table): Update.
2220 * target.c (debug_print_register): Update.
2221 * tramp-frame.c (tramp_frame_start): Update.
2222 * v850-tdep.c (v850_analyze_prologue, v850_push_dummy_call,
2223 v850_extract_return_value, v850_store_return_value,
2224 * valarith.c (value_binop, value_bit_index): Update.
2225 * valops.c (value_cast): Update.
2226 * valprint.c (val_print_type_code_int, val_print_string,
2227 read_string): Update.
2228 * value.c (unpack_long, unpack_double, unpack_field_as_long,
2229 modify_field, pack_long): Update.
2230 * vax-tdep.c (vax_store_arguments, vax_push_dummy_call,
2231 vax_skip_prologue): Update.
2232 * xstormy16-tdep.c (xstormy16_push_dummy_call,
2233 xstormy16_analyze_prologue, xstormy16_in_function_epilogue_p,
2234 xstormy16_resolve_jmp_table_entry, xstormy16_find_jmp_table_entry,
2235 xstormy16_pointer_to_address, xstormy16_address_to_pointer): Update.
2236 * xtensa-tdep.c (extract_call_winsize, xtensa_pseudo_register_read,
2237 xtensa_pseudo_register_write, xtensa_frame_cache,
2238 xtensa_push_dummy_call, call0_track_op, call0_frame_cache): Update.
2241 * dfp.h (decimal_to_string, decimal_from_string, decimal_from_integral,
2242 decimal_from_floating, decimal_to_doublest, decimal_is_zero): Add
2243 BYTE_ORDER parameter.
2244 (decimal_binop): Add BYTE_ORDER_X, BYTE_ORDER_Y, and BYTE_ORDER_RESULT
2246 (decimal_compare): Add BYTE_ORDER_X and BYTE_ORDER_Y parameters.
2247 (decimal_convert): Add BYTE_ORDER_FROM and BYTE_ORDER_TO parameters.
2248 * dfp.c (match_endianness): Add BYTE_ORDER parameter. Use it
2249 instead of current_gdbarch.
2250 (decimal_to_string, decimal_from_integral, decimal_from_floating,
2251 decimal_to_doublest, decimal_is_zero): Add BYTE_ORDER parameter.
2252 Pass it to match_endianness.
2253 (decimal_binop): Add BYTE_ORDER_X, BYTE_ORDER_Y, and BYTE_ORDER_RESULT
2254 parameters. Pass them to match_endianness.
2255 (decimal_compare): Add BYTE_ORDER_X and BYTE_ORDER_Y parameters.
2256 Pass them to match_endianness.
2257 (decimal_convert): Add BYTE_ORDER_FROM and BYTE_ORDER_TO parameters.
2258 Pass them to match_endianness.
2259 * valarith.c (value_args_as_decimal): Add BYTE_ORDER_X and
2260 BYTE_ORDER_Y output parameters.
2261 (value_binop): Update call to value_args_as_decimal.
2263 Update calls to decimal_to_string, decimal_from_string,
2264 decimal_from_integral, decimal_from_floating, decimal_to_doublest,
2265 decimal_is_zero, decimal_binop, decimal_compare and decimal_convert
2266 to pass/receive byte order:
2267 * c-exp.y (parse_number): Update.
2268 * printcmd.c (printf_command): Update.
2269 * valarith.c (value_args_as_decimal, value_binop, value_logical_not,
2270 value_equal, value_less): Update.
2271 * valops.c (value_cast, value_one): Update.
2272 * valprint.c (print_decimal_floating): Update.
2273 * value.c (unpack_long, unpack_double): Update.
2274 * python/python-value.c (valpy_nonzero): Update.
2277 * ada-valprint.c (char_at): Add BYTE_ORDER parameter.
2278 (printstr): Update calls to char_at.
2279 (ada_val_print_array): Likewise.
2280 * valprint.c (read_string): Add BYTE_ORDER parameter.
2281 (val_print_string): Update call to read_string.
2282 * c-lang.c (c_get_string): Likewise.
2283 * charset.h (target_wide_charset): Add BYTE_ORDER parameter.
2284 * charset.c (target_wide_charset): Add BYTE_ORDER parameter.
2285 Use it instead of current_gdbarch.
2286 * printcmd.c (printf_command): Update calls to target_wide_charset.
2287 * c-lang.c (charset_for_string_type): Add BYTE_ORDER parameter.
2288 Pass to target_wide_charset. Use it instead of current_gdbarch.
2289 (classify_type): Add BYTE_ORDER parameter. Pass to
2290 charset_for_string_type. Allow NULL encoding pointer.
2291 (print_wchar): Add BYTE_ORDER parameter.
2292 (c_emit_char): Update calls to classify_type and print_wchar.
2293 (c_printchar, c_printstr): Likewise.
2296 * gdbarch.sh (in_solib_return_trampoline): Convert to type "m".
2297 * gdbarch.c, gdbarch.h: Regenerate.
2298 * arch-utils.h (generic_in_solib_return_trampoline): Add GDBARCH
2300 * arch-utils.c (generic_in_solib_return_trampoline): Likewise.
2301 * hppa-hpux-tdep.c (hppa_hpux_in_solib_return_trampoline): Likewise.
2302 * rs6000-tdep.c (rs6000_in_solib_return_trampoline): Likewise.
2303 (rs6000_skip_trampoline_code): Update call.
2305 * alpha-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to
2306 dynamic_sigtramp_offset and pc_in_sigtramp callbacks.
2307 (alpha_read_insn): Add GDBARCH parameter.
2308 * alpha-tdep.c (alpha_lds, alpha_sts): Add GDBARCH parameter.
2309 (alpha_register_to_value): Pass architecture to alpha_sts.
2310 (alpha_extract_return_value): Likewise.
2311 (alpha_value_to_register): Pass architecture to alpha_lds.
2312 (alpha_store_return_value): Likewise.
2313 (alpha_read_insn): Add GDBARCH parameter.
2314 (alpha_skip_prologue): Pass architecture to alpha_read_insn.
2315 (alpha_heuristic_proc_start): Likewise.
2316 (alpha_heuristic_frame_unwind_cache): Likewise.
2317 (alpha_next_pc): Likewise.
2318 (alpha_sigtramp_frame_this_id): Pass architecture to
2319 tdep->dynamic_sigtramp_offset callback.
2320 (alpha_sigtramp_frame_sniffer): Pass architecture to
2321 tdep->pc_in_sigtramp callback.
2322 * alphafbsd-tdep.c (alphafbsd_pc_in_sigtramp): Add GDBARCH parameter.
2323 (alphafbsd_sigtramp_offset): Likewise.
2324 * alpha-linux-tdep.c (alpha_linux_sigtramp_offset_1): Add GDBARCH
2325 parameter. Pass to alpha_read_insn.
2326 (alpha_linux_sigtramp_offset): Add GDBARCH parameter. Pass to
2327 alpha_linux_sigtramp_offset_1.
2328 (alpha_linux_pc_in_sigtramp): Add GDBARCH parameter. Pass to
2329 alpha_linux_sigtramp_offset.
2330 (alpha_linux_sigcontext_addr): Pass architecture to alpha_read_insn
2331 and alpha_linux_sigtramp_offset.
2332 * alphanbsd-tdep.c (alphanbsd_sigtramp_offset): Add GDBARCH parameter.
2333 (alphanbsd_pc_in_sigtramp): Add GDBARCH parameter. Pass to
2334 alphanbsd_sigtramp_offset.
2335 * alphaobsd-tdep.c (alphaobsd_sigtramp_offset): Add GDBARCH parameter.
2336 (alphaobsd_pc_in_sigtramp): Add GDBARCH parameter. Pass to
2338 (alphaobsd_sigcontext_addr): Pass architecture to
2339 alphaobsd_sigtramp_offset.
2340 * alpha-osf1-tdep.c (alpha_osf1_pc_in_sigtramp): Add GDBARCH
2343 * amd64-tdep.c (amd64_analyze_prologue): Add GDBARCH parameter.
2344 (amd64_skip_prologue): Pass architecture to amd64_analyze_prologue.
2345 (amd64_frame_cache): Likewise.
2347 * arm-tdep.c (SWAP_SHORT, SWAP_INT): Remove.
2348 (thumb_analyze_prologue, arm_skip_prologue, arm_scan_prologue,
2349 thumb_get_next_pc, arm_get_next_pc): Do not use SWAP_ macros.
2350 * arm-wince-tdep.c: Include "frame.h".
2352 * avr-tdep.c (EXTRACT_INSN): Remove.
2353 (avr_scan_prologue): Add GDBARCH argument, inline EXTRACT_INSN.
2354 (avr_skip_prologue): Pass architecture to avr_scan_prologue.
2355 (avr_frame_unwind_cache): Likewise.
2357 * cris-tdep.c (struct instruction_environment): Add BYTE_ORDER member.
2358 (find_step_target): Initialize it.
2359 (get_data_from_address): Add BYTE_ORDER parameter.
2360 (bdap_prefix): Pass byte order to get_data_from_address.
2361 (handle_prefix_assign_mode_for_aritm_op): Likewise.
2362 (three_operand_add_sub_cmp_and_or_op): Likewise.
2363 (handle_inc_and_index_mode_for_aritm_op): Likewise.
2365 * frv-linux-tdep.c (frv_linux_pc_in_sigtramp): Add GDBARCH parameter.
2366 (frv_linux_sigcontext_reg_addr): Pass architecture to
2367 frv_linux_pc_in_sigtramp.
2368 (frv_linux_sigtramp_frame_sniffer): Likewise.
2370 * h8300-tdep.c (h8300_is_argument_spill): Add GDBARCH parameter.
2371 (h8300_analyze_prologue): Add GDBARCH parameter. Pass to
2372 h8300_is_argument_spill.
2373 (h8300_frame_cache, h8300_skip_prologue): Pass architecture
2374 to h8300_analyze_prologue.
2376 * hppa-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to
2377 in_solib_call_trampoline callback.
2378 (hppa_in_solib_call_trampoline): Add GDBARCH parameter.
2379 * hppa-tdep.c (hppa64_convert_code_addr_to_fptr): Add GDBARCH
2381 (hppa64_push_dummy_call): Pass architecture to
2382 hppa64_convert_code_addr_to_fptr.
2383 (hppa_match_insns): Add GDBARCH parameter.
2384 (hppa_match_insns_relaxed): Add GDBARCH parameter. Pass to
2386 (hppa_skip_trampoline_code): Pass architecture to hppa_match_insns.
2387 (hppa_in_solib_call_trampoline): Add GDBARCH parameter. Pass to
2388 hppa_match_insns_relaxed.
2389 (hppa_stub_unwind_sniffer): Pass architecture to
2390 tdep->in_solib_call_trampoline callback.
2391 * hppa-hpux-tdep.c (hppa_hpux_search_pattern): Add GDBARCH parameter.
2392 (hppa32_hpux_search_dummy_call_sequence): Pass architecture to
2393 hppa_hpux_search_pattern.
2394 * hppa-linux-tdep.c (insns_match_pattern): Add GDBARCH parameter.
2395 (hppa_linux_sigtramp_find_sigcontext): Add GDBARCH parameter.
2396 Pass to insns_match_pattern.
2397 (hppa_linux_sigtramp_frame_unwind_cache): Pass architecture to
2398 hppa_linux_sigtramp_find_sigcontext.
2399 (hppa_linux_sigtramp_frame_sniffer): Likewise.
2400 (hppa32_hpux_in_solib_call_trampoline): Add GDBARCH parameter.
2401 (hppa64_hpux_in_solib_call_trampoline): Likewise.
2403 * i386-tdep.c (i386_follow_jump): Add GDBARCH parameter.
2404 (i386_analyze_frame_setup): Add GDBARCH parameter.
2405 (i386_analyze_prologue): Add GDBARCH parameter. Pass to
2406 i386_follow_jump and i386_analyze_frame_setup.
2407 (i386_skip_prologue): Pass architecture to i386_analyze_prologue
2408 and i386_follow_jump.
2409 (i386_frame_cache): Pass architecture to i386_analyze_prologue.
2410 (i386_pe_skip_trampoline_code): Add FRAME parameter.
2411 * i386-tdep.h (i386_pe_skip_trampoline_code): Add FRAME parameter.
2412 * i386-cygwin-tdep.c (i386_cygwin_skip_trampoline_code): Pass
2413 frame to i386_pe_skip_trampoline_code.
2415 * ia64-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter
2416 to sigcontext_register_address callback.
2417 * ia64-tdep.c (ia64_find_global_pointer): Add GDBARCH parameter.
2418 (ia64_find_unwind_table): Pass architecture to
2419 ia64_find_global_pointer.
2420 (find_extant_func_descr): Add GDBARCH parameter.
2421 (find_func_descr): Pass architecture to find_extant_func_descr
2422 and ia64_find_global_pointer.
2423 (ia64_sigtramp_frame_init_saved_regs): Pass architecture to
2424 tdep->sigcontext_register_address callback.
2425 * ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Add
2428 * iq2000-tdep.c (iq2000_scan_prologue): Add GDBARCH parameter.
2429 (iq2000_frame_cache): Pass architecture to iq2000_scan_prologue.
2431 * lm32-tdep.c (lm32_analyze_prologue): Add GDBARCH parameter.
2432 (lm32_skip_prologue, lm32_frame_cache): Pass architecture to
2433 lm32_analyze_prologue.
2435 * m32r-tdep.c (decode_prologue): Add GDBARCH parameter.
2436 (m32r_skip_prologue): Pass architecture to decode_prologue.
2438 * m68hc11-tdep.c (m68hc11_analyze_instruction): Add GDBARCH parameter.
2439 (m68hc11_scan_prologue): Pass architecture to
2440 m68hc11_analyze_instruction.
2442 * m68k-tdep.c (m68k_analyze_frame_setup): Add GDBARCH parameter.
2443 (m68k_analyze_prologue): Pass architecture to
2444 m68k_analyze_frame_setup.
2446 * m88k-tdep.c (m88k_fetch_instruction): Add BYTE_ORDER parameter.
2447 (m88k_analyze_prologue): Add GDBARCH parameter. Pass byte order
2448 to m88k_fetch_instruction.
2449 (m88k_skip_prologue): Pass architecture to m88k_analyze_prologue.
2450 (m88k_frame_cache): Likewise.
2452 * mep-tdep.c (mep_get_insn): Add GDBARCH parameter.
2453 (mep_analyze_prologue): Pass architecture to mep_get_insn.
2455 * mips-tdep.c (mips_fetch_instruction): Add GDBARCH parameter.
2456 (mips32_next_pc): Pass architecture to mips_fetch_instruction.
2457 (deal_with_atomic_sequence): Likewise.
2458 (unpack_mips16): Add GDBARCH parameter, pass to mips_fetch_instruction.
2459 (mips16_scan_prologue): Likewise.
2460 (mips32_scan_prologue): Likewise.
2461 (mips16_in_function_epilogue_p): Likewise.
2462 (mips32_in_function_epilogue_p): Likewise.
2463 (mips_about_to_return): Likewise.
2464 (mips_insn16_frame_cache): Pass architecture to mips16_scan_prologue.
2465 (mips_insn32_frame_cache): Pass architecture to mips32_scan_prologue.
2466 (mips_skip_prologue): Pass architecture to mips16_scan_prologue
2467 and mips32_scan_prologue.
2468 (mips_in_function_epilogue_p): Pass architecture to
2469 mips16_in_function_epilogue_p and
2470 mips32_in_function_epilogue_p.
2471 (heuristic_proc_start): Pass architecture to mips_fetch_instruction
2472 and mips_about_to_return.
2473 (mips_skip_mips16_trampoline_code): Pass architecture to
2474 mips_fetch_instruction.
2475 (fetch_mips_16): Add GDBARCH parameter.
2476 (mips16_next_pc): Pass architecture to fetch_mips_16.
2477 (extended_mips16_next_pc): Pass architecture to unpack_mips16 and
2480 * objc-lang.c (read_objc_method, read_objc_methlist_nmethods,
2481 read_objc_methlist_method, read_objc_object, read_objc_super,
2482 read_objc_class): Add GDBARCH parameter.
2483 (find_implementation_from_class): Add GDBARCH parameter, pass
2484 to read_objc_class, read_objc_methlist_nmethods, and
2485 read_objc_methlist_method.
2486 (find_implementation): Add GDBARCH parameter, pass to
2487 read_objc_object and find_implementation_from_class.
2488 (resolve_msgsend, resolve_msgsend_stret): Pass architecture
2489 to find_implementation.
2490 (resolve_msgsend_super, resolve_msgsend_super_stret): Pass
2491 architecture to read_objc_super and find_implementation_from_class.
2493 * ppc64-linux-tdep.c (ppc64_desc_entry_point): Add GDBARCH parameter.
2494 (ppc64_standard_linkage1_target, ppc64_standard_linkage2_target,
2495 ppc64_standard_linkage3_target): Pass architecture to
2496 ppc64_desc_entry_point.
2497 * rs6000-tdep.c (bl_to_blrl_insn_p): Add BYTE_ORDER parameter.
2498 (skip_prologue): Pass byte order to bl_to_blrl_insn_p.
2499 (rs6000_fetch_instruction): Add GDBARCH parameter.
2500 (rs6000_skip_stack_check): Add GDBARCH parameter, pass to
2501 rs6000_fetch_instruction.
2502 (skip_prologue): Pass architecture to rs6000_fetch_instruction.
2504 * remote-mips.c (mips_store_word): Return old_contents as host
2505 integer value instead of target bytes.
2507 * s390-tdep.c (struct s390_prologue_data): Add BYTE_ORDER member.
2508 (s390_analyze_prologue): Initialize it.
2509 (extend_simple_arg): Add GDBARCH parameter.
2510 (s390_push_dummy_call): Pass architecture to extend_simple_arg.
2512 * scm-lang.c (scm_get_field): Add BYTE_ORDER parameter.
2513 * scm-lang.h (scm_get_field): Add BYTE_ORDER parameter.
2514 (SCM_CAR, SCM_CDR): Pass SCM_BYTE_ORDER to scm_get_field.
2515 * scm-valprint.c (scm_scmval_print): Likewise.
2516 (scm_scmlist_print, scm_ipruk, scm_scmval_print): Define
2519 * sh64-tdep.c (look_for_args_moves): Add GDBARCH parameter.
2520 (sh64_skip_prologue_hard_way): Add GDBARCH parameter, pass to
2521 look_for_args_moves.
2522 (sh64_skip_prologue): Pass architecture to
2523 sh64_skip_prologue_hard_way.
2524 * sh-tdep.c (sh_analyze_prologue): Add GDBARCH parameter.
2525 (sh_skip_prologue): Pass architecture to sh_analyze_prologue.
2526 (sh_frame_cache): Likewise.
2528 * solib-irix.c (extract_mips_address): Add GDBARCH parameter.
2529 (fetch_lm_info, irix_current_sos, irix_open_symbol_file_object):
2530 Pass architecture to extract_mips_address.
2532 * sparc-tdep.h (sparc_fetch_wcookie): Add GDBARCH parameter.
2533 * sparc-tdep.c (sparc_fetch_wcookie): Add GDBARCH parameter.
2534 (sparc_supply_rwindow, sparc_collect_rwindow): Pass architecture
2535 to sparc_fetch_wcookie.
2536 (sparc32_frame_prev_register): Likewise.
2537 * sparc64-tdep.c (sparc64_frame_prev_register): Likewise.
2538 * sparc32nbsd-tdep.c (sparc32nbsd_sigcontext_saved_regs): Likewise.
2539 * sparc64nbsd-tdep.c (sparc64nbsd_sigcontext_saved_regs): Likewise.
2541 * spu-tdep.c (spu_analyze_prologue): Add GDBARCH parameter.
2542 (spu_skip_prologue): Pass architecture to spu_analyze_prologue.
2543 (spu_virtual_frame_pointer): Likewise.
2544 (spu_frame_unwind_cache): Likewise.
2545 (info_spu_mailbox_list): Add BYTE_ORER parameter.
2546 (info_spu_mailbox_command): Pass byte order to info_spu_mailbox_list.
2547 (info_spu_dma_cmdlist): Add BYTE_ORER parameter.
2548 (info_spu_dma_command, info_spu_proxydma_command): Pass byte order
2549 to info_spu_dma_cmdlist.
2551 * symfile.c (read_target_long_array): Add GDBARCH parameter.
2552 (simple_read_overlay_table, simple_read_overlay_region_table,
2553 simple_overlay_update_1): Pass architecture to read_target_long_array.
2555 * v850-tdep.c (v850_analyze_prologue): Add GDBARCH parameter.
2556 (v850_frame_cache): Pass architecture to v850_analyze_prologue.
2558 * xstormy16-tdep.c (xstormy16_analyze_prologue): Add GDBARCH
2560 (xstormy16_skip_prologue, xstormy16_frame_cache): Pass architecture
2561 to xstormy16_analyze_prologue.
2562 (xstormy16_resolve_jmp_table_entry): Add GDBARCH parameter.
2563 (xstormy16_find_jmp_table_entry): Likewise.
2564 (xstormy16_skip_trampoline_code): Pass architecture to
2565 xstormy16_resolve_jmp_table_entry.
2566 (xstormy16_pointer_to_address): Likewise.
2567 (xstormy16_address_to_pointer): Pass architecture to
2568 xstormy16_find_jmp_table_entry.
2570 * xtensa-tdep.c (call0_track_op): Add GDBARCH parameter.
2571 (call0_analyze_prologue): Add GDBARCH parameter, pass to
2573 (call0_frame_cache): Pass architecture to call0_analyze_prologue.
2574 (xtensa_skip_prologue): Likewise.
2576 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
2578 * defs.h (strlen_paddr, paddr, paddr_nz): Remove.
2579 (paddress): Add GDBARCH parameter.
2580 * utils.c (strlen_paddr, paddr, paddr_nz): Remove.
2581 (paddress): Add GDBARCH parameter, use it instead of current_gdbarch.
2582 * ui-out.h (ui_out_field_core_addr): Add GDBARCH parameter.
2583 * ui-out.c (ui_out_field_core_addr): Add GDBARCH parameter,
2584 use it instead of current_gdbarch.
2586 Update calls to ui_out_field_core_addr to pass architecture:
2587 * ada-lang.c (print_one_exception): Update.
2588 * breakpoint.c (print_one_breakpoint_location,
2589 print_one_exception_catchpoint): Update.
2590 * disasm.c (dump_insns): Update.
2591 * darwin-nat-info.c (darwin_debug_regions_recurse): Update.
2592 * mi/mi-main.c (mi_cmd_data_read_memory): Update.
2593 * mi/mi-symbol-cmds.c: Include "objfiles.h".
2594 (mi_cmd_symbol_list_lines): Update.
2595 * stack.c (print_frame_info, print_frame): Update.
2597 Update callers of paddress to pass architecture:
2598 * ada-tasks.c (info_task): Update.
2599 * ada-valprint.c (ada_val_print_1): Update.
2600 * annotate.c (annotate_source, annotate_frame_begin): Update.
2601 * breakpoint.c (insert_bp_location, describe_other_breakpoints,
2603 * cli/cli-cmds.c (edit_command, list_command, print_disassembly):
2605 * corefile.c (memory_error): Update.
2606 * c-valprint.c (print_function_pointer_address, c_val_print): Update.
2607 * disasm.c (dis_asm_print_address): Update.
2608 * exec.c (print_section_info): Update.
2609 * f-valprint.c (f_val_print): Update.
2610 * infcmd.c: Include "arch-utils.h".
2611 (jump_command, program_info): Update.
2612 * linux-fork.c: Include "arch-utils.h".
2613 (info_forks_command): Update.
2614 * m2-valprint.c (print_function_pointer_address,
2615 print_unpacked_pointer, print_variable_at_address,
2616 m2_val_print): Update.
2617 * m32r-rom.c (m32r_load_section, m32r_load, m32r_upload_command):
2619 * printcmd.c (print_address, print_address_demangle, address_info):
2621 * p-valprint.c (pascal_val_print): Update.
2622 * source.c: Include "arch-utils.h".
2623 (line_info): Update.
2624 * stack.c (frame_info, print_block_frame_labels): Update.
2625 * symfile.c (add_symbol_file_command, list_overlays_command): Update.
2626 * symmisc.c (dump_msymbols, dump_psymtab, dump_symtab_1,
2627 print_symbol, print_partial_symbols, maintenance_info_psymtabs,
2628 maintenance_check_symtabs): Update.
2629 * symtab.c (find_pc_sect_symtab): Update.
2630 * target.c (deprecated_debug_xfer_memory): Update.
2631 * tracepoint.c (scope_info): Update.
2632 * tui/tui-stack.c (tui_make_status_line): Update.
2633 * valprint.c (val_print_string): Update.
2635 Update callers of paddr_nz to use paddress instead (keeping
2636 user-visible output identical):
2637 * alpha-tdep.c (alpha_heuristic_proc_start): Update.
2638 * amd64-tdep.c (fixup_riprel, amd64_displaced_step_copy_insn,
2639 amd64_displaced_step_fixup): Update.
2640 * arch-utils.c (simple_displaced_step_copy_insn): Update.
2641 * auxv.c (fprint_target_auxv): Update.
2642 * breakpoint.c (insert_single_step_breakpoint): Update.
2643 * buildsym.c (finish_block): Update.
2644 * cli/cli-dump.c (restore_section_callback): Update.
2645 * fbsd-nat.c (fbsd_find_memory_regions): Update.
2646 * frame.c (frame_unwind_register_value): Update.
2647 * gcore.c (gcore_create_callback): Update.
2648 * hppa-tdep.c (hppa_frame_cache, hppa_skip_trampoline_code): Update.
2649 * i386-tdep.c (i386_displaced_step_fixup, i386_record_modrm,
2650 i386_record_lea_modrm_addr, i386_record_lea_modrm,
2651 i386_process_record): Update.
2652 * ia64-tdep.c (ia64_frame_this_id, ia64_sigtramp_frame_this_id,
2653 ia64_libunwind_frame_this_id, ia64_libunwind_sigtramp_frame_this_id,
2654 ia64_dummy_id, ia64_access_reg, ia64_access_rse_reg): Update.
2655 * infrun.c (displaced_step_prepare, displaced_step_fixup,
2656 handle_inferior_event, insert_step_resume_breakpoint_at_sal,
2657 insert_longjmp_resume_breakpoint): Update.
2658 * linux-nat.c (linux_nat_find_memory_regions): Update.
2659 * linux-record.c (record_linux_system_call): Update.
2660 * mips-tdep.c (heuristic_proc_start, mips_eabi_push_dummy_call,
2661 mips_n32n64_push_dummy_call, mips_o32_push_dummy_call,
2662 mips_o64_push_dummy_call): Update.
2663 * monitor.c (monitor_error, monitor_remove_breakpoint): Update.
2664 * record.c (record_arch_list_add_mem, record_wait,
2665 record_xfer_partial): Update.
2666 * remote-mips.c (mips_fetch_word, mips_check_lsi_error,
2667 mips_common_breakpoint): Update.
2668 * remote-sim.c (gdbsim_xfer_inferior_memory): Update.
2669 * rs6000-tdep.c (ppc_displaced_step_fixup): Update.
2670 * solib-som.c (som_current_sos): Update.
2671 * symfile.c (load_progress, generic_load): Update.
2672 * symfile-mem.c (add_vsyscall_page): Update.
2673 * valops.c (value_fetch_lazy): Update.
2674 * windows-tdep.c (windows_xfer_shared_library): Update.
2676 Update callers of paddr_nz to use paddress instead (changing
2677 user-visible output to make it more correct):
2678 * dwarf2loc.c (locexpr_describe_location): Update.
2679 * ia64-tdep.c (ia64_memory_insert_breakpoint,
2680 ia64_memory_remove_breakpoint): Update.
2681 * jv-valprint.c (java_value_print): Update.
2682 * m32c-tdep.c (m32c_m16c_address_to_pointer): Update.
2683 * monitor.c (monitor_read_memory): Update.
2685 Update callers of paddr to use paddress instead (changing
2686 user-visible output to make it more correct):
2687 * arm-tdep.c (arm_push_dummy_call): Update.
2688 * breakpoint.c (insert_bp_location, create_thread_event_breakpoint,
2689 create_breakpoint): Update.
2690 * darwin-nat-info.c (darwin_debug_regions): Update.
2691 * dcache.c (dcache_info): Update.
2692 * dsrec.c (load_srec, make_srec): Update.
2693 * dwarf2-frame.c (dwarf2_restore_rule, execute_cfa_program,
2694 dwarf2_frame_cache): Update.
2695 * gcore.c (gcore_copy_callback): Update.
2696 * gnu-nat.c (gnu_xfer_memory): Update.
2697 * mips-linux-nat.c (mips_show_dr): Update.
2698 * monitor.c (monitor_write_memory, monitor_insert_breakpoint,
2699 monitor_remove_breakpoint): Update.
2700 * remote.c (compare_sections_command): Update.
2701 * remote-m32r-sdi.c (m32r_xfer_memory, m32r_insert_breakpoint,
2702 m32r_remove_breakpoint, m32r_insert_watchpoint,
2703 m32r_remove_watchpoint): Update.
2704 * sol-thread.c (info_cb): Update.
2705 * symfile.c (load_progress): Update.
2707 Update callers of paddress or paddr_nz to use hex_string instead
2708 (changes output of internal/error/debug messages only):
2709 * dwarf2read.c (dump_die_shallow): Update.
2710 * frame.c (fprint_field, fprint_frame, frame_pc_unwind,
2711 get_frame_func, create_new_frame): Update.
2712 * hppa-tdep.c (find_unwind_entry, unwind_command): Update.
2713 * ia64-tdep.c (get_kernel_table, ia64_find_proc_info_x,
2714 ia64_get_dyn_info_list): Update.
2715 * maint.c (maintenance_translate_address): Update.
2716 * mi/mi-cmd-var.c (mi_cmd_var_create): Update.
2717 * target.c (target_flash_erase): Update.
2719 Update callers of paddr/paddr_nz to use phex/phex_nz instead,
2720 using an appropriate address size. Remove use of strlen_paddr.
2721 * exec.c (exec_files_info): Update.
2722 * i386-nat.c (i386_show_dr): Update.
2723 * remote.c (remote_flash_erase): Update.
2724 * m32r-rom.c (m32r_load_section): Update.
2725 * monitor.c (monitor_vsprintf, monitor_store_register): Update.
2726 * remote.c (remote_check_symbols, remote_search_memory): Update.
2727 * remote-mips.c (mips_request, mips_common_breakpoint): Update.
2728 * scm-valprint.c (scm_ipruk, scm_scmval_print): Update.
2729 * sh64-tdep.c (sh64_show_media_regs, sh64_show_compact_regs): Update.
2730 * sh-tdep.c (sh_generic_show_regs, sh3_show_regs, sh2e_show_regs,
2731 sh2a_show_regs, sh2a_nofpu_show_regs, sh3e_show_regs,
2732 sh3_dsp_show_regs, sh4_show_regs, sh4_nofpu_show_regs,
2733 sh_dsp_show_regs): Update.
2734 * xcoffsolib.c (sharedlibrary_command): Update.
2737 * maint.c (maint_print_section_info): Add ADDR_SIZE parameter.
2738 Use hex_string_custom instead of paddr.
2739 (print_bfd_section_info): Pass address size.
2740 (print_objfile_section_info): Likewise.
2742 * annotate.h (annotate_source): Add GDBARCH parameter.
2743 (annotate_frame_begin): Likewise.
2744 * annotate.c (annotate_source): Add GDBARCH parameter.
2745 (annotate_frame_begin): Likewise.
2746 * source.c (identify_source_line): Update call to annotate_source.
2747 * stack.c (print_frame_info, print_frame): Update call to
2748 annotate_frame_begin.
2750 * breakpoint.c (describe_other_breakpoints): Add GDBARCH parameter.
2751 (create_breakpoint, create_ada_exception_breakpoint): Update call.
2753 * stack.c (print_block_frame_labels): Add GDBARCH parameter.
2754 (print_frame_label_vars): Update call.
2756 * symmisc.c (print_partial_symbols): Add GDBARCH parameter.
2757 (dump_psymtab): Update call to print_partial_symbols.
2758 (struct print_symbol_args): Add GDBARCH member.
2759 (dump_symtab_1): Set print_symbol_args architecture member.
2760 (print_symbol): Use it.
2762 * windows-tdep.h (windows_xfer_shared_library): Add GDBARCH
2764 * windows-tdep.c (windows_xfer_shared_library): Likewise.
2765 * i386-cygwin-tdep.c (struct cpms_data): Add GDBARCH member.
2766 (core_process_module_section): Pass architecture from cpms_data to
2767 windows_xfer_shared_library.
2768 (windows_core_xfer_shared_libraries): Initialize cmps_data
2769 architecture member.
2770 * windows-nat.c (windows_xfer_shared_libraries): Pass architecture
2771 to windows_xfer_shared_library.
2773 * defs.h (print_address): Add GDBARCH parameter.
2774 * printcmd.c (print_address): Add GDBARCH parameter.
2775 (print_scalar_formatted, do_examine): Update call.
2776 * findcmd.c (find_command): Update call.
2777 * tracepoint.c: Include "arch-utils.h".
2778 (trace_find_line_command): Update call.
2779 * tui/tui-disasm.c (tui_disassemble): Update call.
2781 * value.h (print_address_demangle): Add GDBARCH parameter.
2782 * printcmd.c (print_address_demangle): Add GDBARCH parameter.
2783 * c-valprint.c (print_function_pointer_address, c_val_print):
2785 * f-valprint.c (f_val_print): Update call.
2786 * gnu-v3-abi.c (gnuv3_print_method_ptr): Update call.
2787 * jv-valprint.c (java_val_print): Update call.
2788 * m2-valprint.c (print_function_pointer_address, m2_val_print):
2790 * p-valprint.c (pascal_val_print): Update call.
2792 * disasm.c (gdb_disassemble_info): Install architecture into
2793 di.application_data field.
2795 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
2797 * disasm.h (gdb_disassembly): Add GDBARCH parameter.
2798 (gdb_print_insn): Likewise.
2799 * disasm.c (dump_insns): Add GDBARCH parameter. Use it instead
2801 (do_mixed_source_and_assembly): Add GDBARCH parameter. Pass to
2803 (do_assembly_only): Likewise.
2804 (gdb_disassembly): Add GDBARCH parameter. Use it instead of
2805 current_gdbarch. Pass to subroutines.
2806 (gdb_print_insn): Add GDBARCH parameter. Use it instead of
2809 * stack.c (struct gdb_disassembly_stub_args): Add GDBARCH member.
2810 (gdb_disassembly_stub): Pass architecture to gdb_disassembly.
2811 (do_gdb_disassembly): Add GDBARCH argument. Store into args.
2812 (print_frame_info): Pass architecture to do_gdb_disassembly.
2814 * printcmd.c (print_formatted): Pass architecture to gdb_print_insn.
2816 * mi/mi-cmd-disas.c: Include "arch-utils.h"
2817 (mi_cmd_disassemble): Pass architecture to gdb_disassembly.
2819 * cli/cli-cmds.c: Include "arch-utils.h".
2820 (print_disassembly): Add GDBARCH parameter. Pass to gdb_disassembly
2821 and tui_show_assembly.
2822 (disassemble_current_function): Pass architecture to
2823 tui_get_low_disassembly_address and print_disassembly.
2824 (disassemble_command): Pass architecture to
2825 tui_get_low_disassembly_address and print_disassembly.
2827 * tui/tui.c (tui_show_assembly): Add GDBARCH parameter. Pass to
2828 tui_update_source_windows_with_addr.
2830 * tui/tui-data.h (struct tui_locator_element): Add GDBARCH member.
2831 (struct tui_source_info): Likewise.
2832 * tui/tui-data.c (tui_clear_win_detail): Clear source_info.gdbarch.
2834 * tui/tui-disasm.c (tui_disassemble): Add GDBARCH parameter.
2835 Pass to gdb_print_insn.
2836 (tui_find_disassembly_address): Add GDBARCH parameter. Pass to
2838 (tui_set_disassem_content): Add GDBARCH parameter. Install into
2839 source_info.gdbarch. Pass to tui_disassemble.
2840 (tui_show_disassem): Add GDBARCH parameter. Pass to
2841 tui_update_source_window.
2842 (tui_show_disassem_and_update_source): Add GDBARCH parameter. Pass to
2843 tui_show_disassem and tui_update_source_window.
2845 (tui_get_begin_asm_address): Return locator architecture in addition
2846 to locator PC value.
2848 (tui_get_low_disassembly_address): Add GDBARCH parameter. Pass to
2849 tui_get_low_disassembly_address.
2851 (tui_vertical_disassem_scroll): Pass architecture to subroutines.
2853 * tui/tui-disasm.h (tui_set_disassem_content): Add GDBARCH parameter.
2854 (tui_show_disassem): Likewise.
2855 (tui_show_disassem_and_update_source): Likewise.
2856 (tui_get_begin_asm_address): Return architecture and PC value.
2858 * tui/tui.h (tui_get_low_disassembly_address): Add GDBARCH parameter.
2859 (tui_show_assembly): Add GDBARCH parameter.
2861 * tui/tui-layout.c (extract_display_start_addr): Return current window
2862 architecture in addition to current PC value.
2864 (tui_set_layout): Update calls to tui_get_low_disassembly_address and
2865 extract_display_start_addr. Pass architecture to
2866 tui_update_source_windows_with_addr.
2868 * tui/tui-source.c: Include "objfiles.h".
2869 (tui_set_source_content): Initialize window architecture.
2870 (tui_show_symtab_source): Add GDBARCH parameter. Pass to
2871 tui_update_source_window_as_is
2873 * tui/tui-source.h (tui_show_symtab_source): Add GDBARCH parameter.
2875 * tui/tui-stack.c (tui_set_locator_info): Add GDBARCH parameter.
2876 Install locator architecture.
2877 (tui_set_locator_filename): Update call.
2878 (tui_show_frame_info): Pass architecture to tui_set_locator_info
2881 * tui/tui-win.c (make_visible_with_new_height): Pass architecture
2882 to tui_update_source_window.
2884 * tui/tui-winsource.c: Include "objfiles.h".
2885 (tui_display_main): Update call to tui_get_begin_asm_address.
2886 Pass architecture to tui_update_source_windows_with_addr.
2887 (tui_update_source_window): Add GDBARCH parameter. Pass to
2888 tui_update_source_window_as_is.
2889 (tui_update_source_window_as_is): Add GDBARCH parameter.
2890 Pass to tui_set_disassem_content.
2891 (tui_update_source_windows_with_addr): Add GDBARCH parameter.
2892 Pass to subroutines.
2893 (tui_update_source_windows_with_line): Pass objfile architecture
2895 (tui_horizontal_source_scroll): Pass architecture to
2896 tui_update_source_window_as_is.
2898 * tui/tui-winsource.h (tui_update_source_window): Add GDBARCH
2900 (tui_update_source_window_as_is): Likewise.
2901 (tui_update_source_windows_with_addr): Likewise.
2903 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
2905 * breakpoint.h (struct breakpoint): New member GDBARCH.
2906 * breakpoint.c: Include "arch-utils.h".
2907 (set_raw_breakpoint_without_location): Add GDBARCH parameter.
2908 Use it to set breakpoint architecture.
2909 (set_raw_breakpoint): Add GDBARCH parameter.
2910 (create_internal_breakpoint): Likewise.
2911 (create_catchpoint): Likewise.
2912 (create_fork_vfork_event_catchpoint): Likewise.
2913 (create_breakpoint): Likewise.
2914 (create_breakpoints): Likewise.
2915 (break_command_really): Likewise.
2916 (create_ada_exception_breakpoint): Likewise.
2917 Update local callers to pass architecture:
2918 (create_internal_breakpoint): Update.
2919 (create_overlay_event_breakpoint): Update.
2920 (create_longjmp_master_breakpoint): Update.
2921 (create_thread_event_breakpoint): Update.
2922 (create_solib_event_breakpoint): Update.
2923 (create_catchpoint): Update.
2924 (create_fork_vfork_event_catchpoint): Update.
2925 (set_momentary_breakpoint): Update.
2926 (clone_momentary_breakpoint): Update.
2927 (create_breakpoint): Update.
2928 (create_breakpoints): Update.
2929 (break_command_really): Update.
2930 (break_command_1): Update.
2931 (set_breakpoint): Update.
2932 (watch_command_1): Update.
2933 (catch_fork_command_1): Update.
2934 (catch_exec_commnd_1): Update.
2935 (handle_gnu_v3_exceptions): Update.
2936 (create_ada_exception_breakpoint): Update.
2937 (catch_ada_exception_command): Update.
2938 (catch_assert_command): Update.
2939 (trace_command): Update.
2941 * breakpoint.h (struct bp_location): New member GDBARCH.
2942 * breakpoint.c (get_sal_arch): New function.
2943 (set_raw_breakpoint): Set location architecture.
2944 (add_location_to_breakpoint): Likewise.
2945 (clone_momentary_breakpoint): Likewise.
2946 (watch_command_1): Likewise.
2947 (update_watchpoint): Likewise.
2948 (bp_loc_is_permanent): Use location architecture instead of
2950 (adjust_breakpoint_address): Add GDBARCH parameter; use it
2951 instead of current_gdbarch.
2952 Update callers of adjust_breakpoint_address to pass
2953 breakpoint location architecture:
2954 (set_raw_breakpoint): Update.
2955 (watch_command_1): Update.
2957 * tracepoint.c: (collect_symbol): Add GDBARCH parameter, use instead
2959 (add_local_symbols): Add GDBARCH parameter. Pass to collect_symbol.
2960 (encode_actions): Pass tracepoint architecture to add_local_symbols
2961 (encode_actions): Use tracepoint architecture instead of
2962 current_gdbarch. Pass it to add_local_symbols and collect_symbol.
2964 * breakpoint.h (struct breakpoint_ops): Replace last_addr parameter
2965 of print_one callback with last_loc.
2966 * breakpoint.c (print_one_breakpoint_location): Replace last_addr
2967 parameter with last_loc.
2968 (print_one_breakpoint): Likewise.
2969 (do_captured_breakpoint_query): Update call.
2970 (breakpoint_1): Pass last_loc instead of last_addr to
2971 print_one_breakpoint. Pass last location architecture instead of
2972 current_gdbarch to set_next_address.
2973 Update all implementations of the print_one callback:
2974 * breakpoint.c (print_one_catch_fork): Update.
2975 (print_one_catch_vfork): Update.
2976 (print_one_catch_exec): Update.
2977 (print_one_exception_catchpoint): Update.
2978 * ada-lang.c (print_one_exception): Update.
2979 (print_one_catch_exception): Update.
2980 (print_one_catch_exception_unhandled): Update.
2981 (print_one_catch_assert): Update.
2983 * breakpoint.c (print_one_breakpoint_location): Add PRINT_ADDRESS_BITS
2984 parameter. Use it instead of gdbarch_addr_bit (current_gdbarch).
2985 (print_one_breakpoint): Add PRINT_ADDRESS_BITS parameter and pass it
2986 to print_one_breakpoint_location.
2987 (breakpoint_address_bits): New function.
2988 (do_captured_breakpoint_query): Compute number of address bits to print
2989 and pass it to print_one_breakpoint.
2990 (breakpoint_1): Likewise. Use it instead of current_gdbarch.
2992 * breakpoint.h (create_thread_event_breakpoint): Add GDBARCH.
2993 * breakpoint.c (create_thread_event_breakpoint): Likewise.
2994 Update callers to create_thread_event_breakpoint:
2995 * aix-thread.c (pd_enable): Update.
2996 * linux-thread-db.c (enable_thread_event): Update.
2998 * breakpoint.h (create_solib_event_breakpoint): Add GDBARCH.
2999 * breakpoint.c (create_solib_event_breakpoint): Likewise.
3000 Update callers to create_solib_event_breakpoint:
3001 * solib-frv.c (enable_break, enable_break2): Update.
3002 * solib-pa64.c (pa64_solib_create_inferior_hook): Update.
3003 * solib-som.c (som_solib_create_inferior_hook): Update.
3004 * solib-darwin.c (darwin_solib_create_inferior_hook): Update.
3005 * solib-svr4.c (enable_break): Update.
3007 * breakpoint.h (insert_single_step_breakpoint): Add GDBARCH.
3008 * breakpoint.c (insert_single_step_breakpoint): Likewise.
3009 Update callers to insert_single_step_breakpoint:
3010 * alpha-tdep.c (alpha_software_single_step): Update.
3011 * arm-linux-tdep.c (arm_linux_software_single_step): Update.
3012 * arm-tdep.c (arm_software_single_step): Update.
3013 * cris-tdep.c (cris_software_single_step): Update.
3014 * rs6000-aix-tdep.c (rs6000_software_single_step): Update.
3015 * rs6000-tdep.c (ppc_deal_with_atomic_sequence): Update.
3016 * sparc-tdep.c (sparc_software_single_step): Update.
3017 * spu-tdep.c (spu_software_single_step): Update.
3018 * mips-tdep.c (deal_with_atomic_sequence): Add GDBARCH parameter.
3019 Pass it to insert_single_step_breakpoint.
3020 (mips_software_single_step): Pass architecture to
3021 deal_with_atomic_sequence and insert_single_step_breakpoint.
3023 * breakpoint.h (deprecated_insert_raw_breakpoint): Add GDBARCH.
3024 (deprecated_remove_raw_breakpoint): Likewise.
3025 * breakpoint.c (deprecated_insert_raw_breakpoint): Add GDBARCH.
3026 (deprecated_remove_raw_breakpoint): Likewise.
3027 Update callers to deprecated_insert_raw_breakpoint and
3028 deprecated_remove_raw_breakpoint:
3029 * breakpoint.c (single_step_gdbarch): New static variable.
3030 (insert_single_step_breakpoint): Pass GDBARCH parameter to
3031 deprecated_insert_raw_breakpoint. Store it in single_step_gdbarch.
3032 (remove_single_step_breakpoints): Pass architecture stored in
3033 single_step_gdbarch to deprecated_remove_raw_breakpoint.
3034 * rs6000-nat.c (exec_one_dummy_insn): Update.
3035 * solib-irix.c (enable_break, disable_break): Update.
3036 * procfs.c (procfs_mourn_inferior): Update.
3037 (remove_dbx_link_breakpoint): Update.
3039 * breakpoint.h (set_breakpoint): Add GDBARCH parameter.
3040 (set_momentary_breakpoint, set_momentary_breakpoint_at_pc): Likewise.
3041 * breakpoint.c (set_breakpoint): Add GDBARCH parameter.
3042 (set_momentary_breakpoint, set_momentary_breakpoint_at_pc): Likewise.
3043 Update callers to set_breakpoint, set_momentary_breakpoint and
3044 set_momentary_breakpoint_at_pc:
3045 * breakpoint.c (set_momentary_breakpoint_at_pc): Update.
3046 (until_break_command): Update.
3047 * infcall.c (call_function_by_hand): Update.
3048 * infcmd.c (finish_backward, finish_forward): Update.
3049 * infrun.c (insert_step_resume_breakpoint_at_sal): Add GDBARCH
3050 parameter. Pass it to set_momentary_breakpoint.
3051 (insert_longjmp_resume_breakpoint): Add GDBARCH parameter.
3052 Pass it to set_momentary_breakpoint_at_pc.
3053 (handle_inferior_event): Update.
3054 (insert_step_resume_breakpoint_at_frame): Update.
3055 (insert_step_resume_breakpoint_at_caller): Update..
3056 * mi/mi-cmd-break.c: Include "arch-utils.h".
3057 (mi_cmd_break_insert): Update.
3059 * target.h (struct target_ops): Add GDBARCH parameter to
3060 to_insert_breakpoint, to_remove_breakpoint, to_insert_hw_breakpoint,
3061 and to_remove_hw_breakpoint members.
3062 (target_insert_breakpoint, target_remove_breakpoint,
3063 target_insert_hw_breakpoint, target_remove_hw_breakpoint): Add GDBARCH
3064 parameter, pass to target routine.
3065 (memory_remove_breakpoint, memory_insert_breakpoint): Add GDBARCH
3067 * target.c (debug_to_insert_breakpoint, debug_to_remove_breakpoint,
3068 debug_to_insert_hw_breakpoint, debug_to_remove_hw_breakpoint): Add
3069 GDBARCH parameter, pass to target routine.
3070 (update_current_target): Update function signature.
3071 * breakpoint.c (insert_bp_location, remove_breakpoint,
3072 deprecated_insert_raw_breakpoint, deprecated_remove_raw_breakpoint):
3073 Pass architecture to target_ routines.
3074 Update all implementations of the target breakpoint routines to take
3075 GDBARCH parameter and use it instead of GDBARCH as appropriate:
3076 * corelow.c (ignore): Update.
3077 * exec.c (ignore): Update.
3078 * mem-break.c (memory_insert_breakpoint): Update.
3079 (memory_remove_breakpoint): Update.
3080 * monitor.c (monitor_insert_breakpoint): Update.
3081 (monitor_remove_breakpoint): Update.
3082 * record.c (record_insert_breakpoint): Update.
3083 (record_beneath_to_insert_breakpoint): Update.
3084 (record_remove_breakpoint): Update.
3085 (record_beneath_to_remove_breakpoint): Update.
3086 * remote.c (remote_insert_breakpoint): Update.
3087 (remote_remove_breakpoint): Update.
3088 (remote_insert_hw_breakpoint): Update.
3089 (remote_remove_hw_breakpoint): Update.
3090 * remote-m32r-sdi.c (m32r_insert_breakpoint): Update.
3091 (m32r_remove_breakpoint): Update.
3092 * remote-mips.c (mips_insert_breakpoint): Update.
3093 (mips_remove_breakpoint): Update.
3094 * i386-nat.c (i386_insert_hw_breakpoint): Update.
3095 (i386_remove_hw_breakpoint): Update.
3096 * nto-procfs.c (procfs_insert_breakpoint): Update.
3097 (procfs_remove_breakpoint): Update.
3098 (procfs_insert_hw_breakpoint): Update.
3099 (procfs_remove_hw_breakpoint): Update.
3101 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
3103 * frame.h (frame_unwind_arch): New.
3104 (frame_unwind_caller_arch): Likewise.
3105 * frame-unwind.h (frame_prev_arch_ftype): New type.
3106 (struct frame_unwind): New member prev_arch.
3107 * frame.c (struct frame_info): New member prev_arch.
3108 (frame_unwind_arch): New function.
3109 (frame_unwind_caller_arch): Likewise..
3110 (get_frame_arch): Reimplement in terms of frame_unwind_arch.
3111 * sentinel-frame.c (sentinel_frame_prev_arch): New function.
3112 (sentinel_frame_unwinder): Install it.
3114 * frame.c (frame_pc_unwind): Use frame_unwind_arch instead
3116 (frame_unwind_register_value): Likewise.
3117 (frame_unwind_register_signed): Likewise.
3118 (frame_unwind_register_unsigned): Likewise.
3119 * frame-unwind.c (frame_unwind_got_optimized): Likewise.
3120 (frame_unwind_got_register): Likewise.
3121 (frame_unwind_got_constant): Likewise.
3122 (frame_unwind_got_bytes): Likewise.
3123 (frame_unwind_got_address): Likewise.
3125 * frame.h (enum frame_type): New value ARCH_FRAME.
3126 * frame.c (fprint_frame_type): Handle ARCH_FRAME.
3127 * stack.c (print_frame_info): Likewise.
3129 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
3131 * target.h (struct target_ops): New member to_thread_architecture.
3132 (target_thread_architecture): New macro.
3133 * target.c (update_current_target): Inherit to_thread_architecture.
3134 (default_thread_architecture): New function.
3135 (debug_to_thread_architecture): New function.
3136 (setup_target_debug): Handle to_thread_architecture.
3138 * regcache.h (get_thread_arch_regcache): New.
3139 * regcache.c (struct regcache_list): New data type.
3140 (current_regcache): Hold regcache list instead of single regcache.
3141 (current_thread_ptid, current_thread_arch): New static variables.
3142 (get_thread_arch_regcache): New function.
3143 (get_thread_regcache): Use it. Call target_thread_architecture.
3144 (regcache_thread_ptid_changed): Update to current_regcache changes.
3145 (registers_changed): Likewise. Reset current_thread_arch and
3146 current_thread_ptid.
3148 * remote.c (remote_wait): Access target registers in target_gdbarch.
3149 * linux-nat.c (linux_nat_do_thread_registers): Likewise.
3150 * proc-service.c (ps_lgetregs, ps_lsetregs): Likewise.
3151 (ps_lgetfpregs, ps_lsetfpregs): Likewise.
3152 * sol-thread.c (ps_lgetregs, ps_lsetregs): Likewise.
3153 (ps_lgetfpregs, ps_lsetfpregs): Likewise.
3154 * solib-svr4.c (enable_break): Likewise.
3155 (svr4_relocate_main_executable): Likewise.
3157 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
3159 * python/python-internal.h (struct language_defn): Declare.
3160 (python_gdbarch, python_language): Likewise.
3161 (ensure_python_env): Add prototype.
3162 (make_cleanup_py_restore_gil): Remove prototype.
3164 * python/python.c: Include "arch-utils.h", "value.h" and "language.h".
3165 (python_gdbarch, python_language): New global variables.
3166 (struct python_env): New data type.
3167 (ensure_python_env, restore_python_env): New functions.
3168 (eval_python_from_control_command): Call ensure_python_env to
3169 install current architecture and language.
3170 (python_command, gdbpy_new_objfile): Likewise.
3171 * python/python-cmd.c: Include "arch-utils.h" and "language.h".
3172 (cmdpy_destroyer, cmdpy_function, cmdpy_completer): Call
3174 * python/python-type.c (clean_up_objfile_types): Likewise.
3175 * python/python-objfile.c: Include "language.h".
3176 (clean_up_objfile): Call ensure_python_env.
3177 * python/python-prettyprint.c (apply_val_pretty_printer): Likewise.
3178 (apply_varobj_pretty_printer): Do not call PyGILState_Ensure.
3179 * varobj.c (varobj_ensure_python_env): New helper function.
3180 (varobj_get_display_hint, update_dynamic_varobj_children,
3181 install_default_visualizer, varobj_set_visualizer, free_variable,
3182 value_get_print_value): Call it.
3183 (value_get_print_value): Add varobj argument instead of pretty
3184 printer argument. Update all callers.
3186 * python/python-utils.c (py_gil_restore, make_cleanup_py_restore_gil):
3189 * value.h (internal_function_fn): Add GDBARCH and LANGUAGE argument.
3190 (call_internal_function): Likewise.
3191 * value.c (call_internal_function): Likewise. Pass to handler.
3192 * eval.c (evaluate_subexp_standard): Update call.
3193 * python/python-function.c: Include "language.h".
3194 (fnpy_call): Add GDBARCH and LANGAUAGE arguments and call
3195 make_cleanup_python_env.
3197 * python/python-value.c (builtin_type_pyint, builtin_type_pyfloat,
3198 builtin_type_pylong, builtin_type_pybool, builtin_type_pychar,
3199 valpy_str): Use python_gdbarch and python_language instead of
3200 current_gdbarch and current_language.
3201 * python/python-type.c (typy_lookup_typename): Likewise.
3203 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
3205 * arch-utils.c (selected_byte_order): Return target_byte_order_user.
3206 (show_endian): Use target_byte_order_user if specified; otherwise
3207 use get_current_arch () instead of current_gdbarch.
3208 (show_architecture): Use set_architecture_string if specified;
3209 otherwise use get_current_arch () instead of current_gdbarch.
3210 (get_current_arch): New function.
3211 * arch-utils.h (get_current_arch): Add prototype.
3213 * osabi.c (show_osabi): Use get_current_arch () instead of
3216 * findcmd.c: Include "arch-utils.h".
3217 (parse_find_args): Add BIG_P argument. Use it instead of byte order
3219 (find_command): Use get_current_arch () instead of current_gdbarch.
3220 Pass byte order to parse_find_args.
3222 * maint.c: Include "arch-utils.h".
3223 (maintenance_print_architecture): Use get_current_arch () instead
3226 * reggroups.c: Include "arch-utils.h".
3227 (maintenance_print_reggroups): Use get_current_arch () instead
3230 * symfile.c: Include "arch-utils.h".
3231 (overlay_load_command): Use get_current_arch () instead of
3234 * value.c: Include "arch-utils.h".
3235 (show_convenience): Use get_current_arch () instead of
3238 * tui/tui-regs.c: Include "arch-utils.h".
3239 (tui_reg_next_command): Use get_current_arch () instead of
3242 * mi/mi-main.c: Include "arch-utils.h".
3243 (mi_cmd_data_read_memory): Use get_current_arch () instead of
3246 * parse.c: Include "arch-utils.h".
3247 (parse_exp_in_context): Use get_current_arch () instead of
3250 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
3252 * gdbtypes.c (make_pointer_type, make_reference_type,
3253 smash_to_memberptr_type, lookup_array_range_type, check_stub_method):
3254 Use type architecture instead of current_gdbarch.
3256 * gdbtypes.h (address_space_name_to_int, address_space_int_to_name):
3257 Add GDBARCH paramter.
3258 * gdbtypes.c (address_space_name_to_int, address_space_int_to_name):
3259 Add GDBARCH parameter. Use it instead of current_gdbarch.
3260 * c-typeprint.c (c_type_print_modifier): Update call.
3261 * parse.c (push_type_address_space): Likewise.
3263 * findvar.c (extract_typed_address, store_typed_address): Use type
3264 architecture instead of current_gdbarch.
3266 * value.c (value_as_address, unpack_field_as_long): Use type architecture
3267 instead of current_gdbarch.
3269 * doublest.c (floatformat_from_length): Add GDBARCH argument. Use it
3270 instead of current_gdbarch.
3271 (floatformat_from_type): Pass type architecture.
3273 * infcall.c (find_function_addr): Use type architecture instead
3276 * valarith.c (value_bitstring_subscript, value_x_binop, value_neg,
3277 value_bit_index): Use type architecture instead of current_gdbarch.
3278 * valops.c (value_cast, value_slice): Likewise.
3280 * value.h (modify_field): Add TYPE argument.
3281 * value.c (modify_field): Add TYPE argument. Use type architecture
3282 instead of current_gdbarch.
3283 (set_internalvar_component): Likewise.
3284 * eval.c (evaluate_struct_tuple): Update call.
3285 * valops.c (value_assign): Likewise.
3286 * ada-lang.c (modify_general_field): Likewise. Add TYPE argument.
3287 (make_array_descriptor): Update calls.
3288 (move_bits): Add BITS_BIG_ENDIAN_P argument. Use it instead of
3290 (ada_value_assign, value_assign_to_component): Update calls.
3291 (decode_packed_array, ada_value_primitive_packed_val, ada_value_assign,
3292 value_assign_to_component): Use type arch instead of current_gdbarch.
3294 * printcmd.c (float_type_from_length): Remove GDBARCH argument,
3295 use type architecture instead.
3296 (print_scalar_formatted, printf_command): Update calls. Use type
3297 architecture instead of current_gdbarch.
3298 * valprint.c (val_print_type_code_int): Use type architecture
3299 instead of current_gdbarch.
3300 * varobj.c (value_get_print_value): Likewise.
3301 * python/python-prettyprint.c (print_string_repr): Add GDBARCH
3302 argument. Use it instead of current_gdbarch.
3303 (apply_val_pretty_printer): Update call.
3305 * ada-valprint.c (ada_val_print_1): Use type architecture instead
3307 * c-valprint.c (print_function_pointer_address): Add GDBARCH argument.
3308 Use it instead of current_gdbarch.
3309 (c_val_print): Update calls passing type architecture.
3310 * f-valprint.c (f_val_print): Use type architecture instead of
3312 * jv-valprint (java_value_print): Likewise.
3313 * m2-valprint.c (print_function_pointer_address): Add GDBARCH argument.
3314 Use it instead of current_gdbarch.
3315 (print_unpacked_pointer): Update calls passing type architecture.
3316 * scm-valprint.c (scm_scmval_print): Use type architecture instead of
3319 * gnu-v3-abi.c (get_class_arch): Remove.
3320 (gnuv3_rtti_type): Use get_type_arch instead of get_class_arch. Remove
3321 special-case check for Java classes.
3322 (gnuv3_virtual_fn_field, gnuv3_baseclass_offset, gnuv3_print_method_ptr,
3323 gnuv3_method_ptr_size, gnuv3_make_method_ptr, gnuv3_method_ptr_to_value):
3324 Use get_type_arch instead of get_class_arch.
3326 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
3328 * gdbtypes.h (TYPE_OBJFILE_OWNED, TYPE_OWNER): New macros.
3329 (TYPE_OBJFILE, TYPE_ALLOC, TYPE_ZALLOC): Reimplement.
3330 (alloc_type_arch): Add prototype.
3331 (alloc_type_copy): Likewise.
3332 (get_type_arch): Likewise.
3333 (arch_type): Likewise.
3334 (arch_integer_type): Likewise.
3335 (arch_character_type): Likewise.
3336 (arch_boolean_type): Likewise.
3337 (init_float_type): Remove, replace by ...
3338 (arch_float_type): ... this.
3339 (init_complex_type): Remove, replace by ...
3340 (arch_complex_type): ... this.
3341 (init_flags_type): Remove, replace by ...
3342 (arch_flags_type): ... this.
3343 (init_composite_type): Remove, replace by ...
3344 (arch_composite_type): ... this.
3346 * gdbtypes.c (alloc_type): No longer support NULL objfile.
3347 (init_type): Likewise.
3348 (alloc_type_arch): New function.
3349 (alloc_type_copy): New function.
3350 (get_type_arch): New function.
3352 (smash_type): Preserve type ownership information.
3353 (make_pointer_type, make_reference_type, make_function_type,
3354 smash_to_memberptr_type, smash_to_method_type): No longer
3355 preserve OBJFILE across smash_type calls.
3356 (make_pointer_type, make_reference_type, make_function_type,
3357 lookup_memberptr_type, lookup_methodptr_type, allocate_stub_method,
3358 create_range_type, create_array_type, create_set_type, copy_type):
3359 Use alloc_type_copy when allocating types.
3360 (check_typedef): Use alloc_type_arch.
3361 (copy_type_recursive): Likewise. Preserve type ownership data
3363 (recursive_dump_type): Dump type ownership data.
3364 (alloc_type_instance): Update type ownership check.
3365 (copy_type, copy_type_recursive): Likewise.
3367 (arch_type): New function.
3368 (arch_integer_type): Likewise.
3369 (arch_character_type): Likewise.
3370 (arch_boolean_type): Likewise.
3371 (init_float_type): Remove, replace by ...
3372 (arch_float_type): ... this.
3373 (init_complex_type): Remove, replace by ...
3374 (arch_complex_type): ... this.
3375 (init_flags_type): Remove, replace by ...
3376 (arch_flags_type): ... this.
3377 (append_flags_type_flag): Move down.
3378 (init_composite_type): Remove, replace by ...
3379 (arch_composite_type): ... this.
3380 (append_composite_type_field_aligned,
3381 append_composite_type_field): Move down.
3383 * gdbarch.c (gdbtypes_post_init): Allocate all types
3384 using per-architecture routines.
3385 * ada-lang.c (ada_language_arch_info): Likewise.
3386 * f-lang.c (build_fortran_types): Likewise.
3387 * jv-lang.c (build_java_types): Likewise.
3388 * m2-lang.c (build_m2_types): Likewise.
3389 * scm-lang.c (build_scm_types): Likewise.
3391 * ada-lang.c (ada_type_of_array): Use alloc_type_copy.
3392 (packed_array_type): Likewise.
3393 (ada_template_to_fixed_record_type_1): Likewise.
3394 (template_to_static_fixed_type): Likewise.
3395 (to_record_with_fixed_variant_part): Likewise.
3396 (to_fixed_variant_branch_type): Likewise.
3397 (to_fixed_array_type): Likewise.
3398 (to_fixed_range_type): Likewise.
3399 (empty_record): Use type instead of objfile argument.
3400 Use alloc_type_copy.
3401 (to_fixed_variant_branch_type): Update call to empty_record.
3402 * jv-lang.c (type_from_class): Use alloc_type_arch.
3404 * arm-tdep.c (arm_ext_type): Allocate per-architecture type.
3405 * i386-tdep.c (i386_eflags_type, i386_mxcsr_type, i387_ext_type,
3406 i386_mmx_type, i386_sse_type): Likewise.
3407 * ia64-tdep.c (ia64_ext_type): Likewise.
3408 * m32c-tdep.c (make_types): Likewise.
3409 * m68k-tdep.c (m68k_ps_type, m68881_ext_type): Likewise.
3410 * rs6000-tdep.c (rs6000_builtin_type_vec64,
3411 rs6000_builtin_type_vec128): Likewise.
3412 * sparc-tdep.c (sparc_psr_type, sparc_fsr_type): Likewise.
3413 * sparc64-tdep.c (sparc64_pstate_type, sparc64_fsr_type,
3414 sparc64_fprs_type): Likewise.
3415 * spu-tdep.c (spu_builtin_type_vec128): Likewise.
3416 * xtensa-tdep.c (xtensa_register_type): Likewise.
3417 * linux-tdep.c (linux_get_siginfo_type): Likewise.
3418 * target-descriptions.c (tdesc_gdb_type): Likewise.
3419 * gnu-v3-abi.c (build_gdb_vtable_type): Likewise.
3421 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
3423 * i386-tdep.h (struct gdbarch_tdep): Add i386_eflags_type and
3424 i386_mxcsr_type members.
3425 (i386_eflags_type): Make into function.
3426 (i386_mxcsr_type): Likewise.
3427 * i386-tdep.c (i386_eflags_type): Make into function.
3428 (i386_mxcsr_type): Likewise.
3429 (i386_register_type): Update uses.
3430 (i386_init_types): Remove.
3431 (_initialize_i386_tdep): Do not call it.
3432 * amd64-tdep.c (amd64_register_type): Update uses.
3434 * m68k-tdep.h (struct gdbarch_tdep): Add m68k_ps_type member.
3435 * m68k-tdep.c (m68k_ps_type): Make into function.
3436 (m68k_register_type): Update use.
3437 (m68k_init_types): Remove.
3438 (_initialize_m68k_tdep): Do not call it.
3440 * sparc-tdep.h (struct gdbarch_tdep): Add sparc_psr_type,
3441 sparc_fsr_type, sparc64_pstate_type, sparc64_fsr_type, and
3442 sparc64_fprs_type members.
3443 * sparc-tdep.c (sparc_psr_type): Make into function.
3444 (sparc_fsr_type): Likewise.
3445 (sparc32_register_type): Update uses.
3446 (sparc_init_types): Remove.
3447 (_initialize_sparc_tdep): Do not call it.
3448 * sparc64-tdep.c (sparc64_pstate_type): Make into function.
3449 (sparc64_fsr_type): Likewise.
3450 (sparc64_fprs_type): Likewise.
3451 (sparc64_register_type): Update uses.
3452 (sparc64_init_types): Remove.
3453 (_initialize_sparc64_tdep): Likewise.
3455 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
3457 * gdbtypes.h (builtin_type_ieee_single, builtin_type_ieee_double,
3458 builtin_type_i387_ext, builtin_type_m68881_ext, builtin_type_arm_ext,
3459 builtin_type_ia64_spill, builtin_type_ia64_quad): Remove.
3460 (init_float_type, init_complex_type): Add prototypes.
3461 * gdbtypes.c (builtin_type_ieee_single, builtin_type_ieee_double,
3462 builtin_type_i387_ext, builtin_type_m68881_ext, builtin_type_arm_ext,
3463 builtin_type_ia64_spill, builtin_type_ia64_quad): Remove.
3464 (_initialize_gdbtypes): Do not initialize them.
3465 (build_flt): Rename to ...
3466 (init_float_type): ... this. Make global.
3467 (build_complex): Rename to ...
3468 (init_complex_type): ... this. Make global. Remove BIT argument.
3469 (gdbtypes_post_init): Update calls.
3471 * ada-lang.c (ada_language_arch_info): Use init_float_type.
3472 * jv-lang.c (build_java_types): Likewise.
3473 * m2-lang.c (build_m2_types): Likewise.
3474 * f-lang.c (build_fortran_types): Use init_float_type and
3477 * target-descriptions.c (tdesc_gdb_type): Call init_float_type instead
3478 of using builtin_type_ieee_single, builtin_type_ieee_double, or
3479 builtin_type_arm_ext.
3481 * ia64-tdep.h (struct gdbarch_tdep): Add ia64_ext_type member.
3482 * ia64-tdep.c (builtin_type_ia64_ext): Remove.
3483 (_initialize_ia64_tdep): Do not initialize it.
3484 (floatformat_valid, floatformat_ia64_ext, floatformats_ia64_ext):
3486 (ia64_ext_type): New function.
3487 (ia64_register_reggroup_p, ia64_convert_register_p,
3488 ia64_register_to_value, ia64_value_to_register,
3489 ia64_extract_return_value, ia64_store_return_value): Use ia64_ext_type
3490 instead of builtin_type_ia64_ext.
3492 * i386-tdep.h (struct gdbarch_tdep): Add i387_ext_type member.
3493 (i387_ext_type): Add prototype.
3494 * i386-tdep.c (i387_ext_type): New function.
3495 (i386_extract_return_value, i386_store_return_value,
3496 i386_register_type): Use it instead of builtin_type_i387_ext.
3497 * amd64-tdep.c (amd64_register_type): Likewise.
3498 * i387-tdep.c (print_i387_value, i387_register_to_value,
3499 i387_value_to_register): Likewise.
3500 (print_i387_value, print_i387_ext): Add GDBARCH argument.
3501 (print_i387_ext, i387_print_float_info): Pass to subroutines.
3503 * m68k-tdep.h (struct gdbarch_tdep): Add m68881_ext_type member.
3504 * m68k-tdep.c (m68881_ext_type): New function.
3505 (m68k_register_type, m68k_convert_register_p): Use it instead
3506 of builtin_type_m68881_ext.
3508 * arm-tdep.h (struct gdbarch_tdep): Add arm_ext_type member.
3509 * arm-tdep.c (arm_ext_type): New function.
3510 (arm_register_type): Use it instead of builtin_type_arm_ext.
3512 * alpha-tdep.c (alpha_register_type): Use builtin types
3513 instead of builtin_type_ieee_double.
3515 * mips-tdep.c (mips_float_register_type, mips_double_register_type):
3517 (mips_register_type): Use builtin types instead of
3518 builtin_type_ieee_single and builtin_type_ieee_double.
3519 (mips_print_fp_register): Use builtin types instead of
3520 mips_float_register_type and mips_double_register_type.
3522 * hppa-tdep.c (hppa32_register_type, hppa64_register_type):
3523 Use builtin types instead of builtin_type_ieee_single and
3524 builtin_type_ieee_double.
3526 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
3528 * gdbtypes.h (builtin_type_int0, builtin_type_int8, builtin_type_uint8,
3529 builtin_type_int16, builtin_type_uint16, builtin_type_int32,
3530 builtin_type_uint32, builtin_type_int64, builtin_type_uint64,
3531 builtin_type_int128, builtin_type_uint128): Remove.
3532 (struct builtin_type): New members builtin_int0, builtin_int8,
3533 builtin_uint8, builtin_int16, builtin_uint16, builtin_int32,
3534 builtin_uint32, builtin_int64, builtin_uint64, builtin_int128,
3535 and builtin_uint128.
3536 * gdbtypes.c (builtin_type_int0, builtin_type_int8, builtin_type_uint8,
3537 builtin_type_int16, builtin_type_uint16, builtin_type_int32,
3538 builtin_type_uint32, builtin_type_int64, builtin_type_uint64,
3539 builtin_type_int128, builtin_type_uint128): Remove.
3540 (_initialize_gdbtypes): Do not initialize them.
3541 (gdbtypes_post_init): Initialize fixed-size integer types.
3543 * dwarf2expr.c (unsigned_address_type, signed_address_type): Add
3544 GDBARCH argument. Return platform-specific type.
3545 (dwarf2_read_address, execute_stack_op): Update calls.
3547 * target-descriptions.c (tdesc_gdb_type): Use platform-specific types
3548 instead of global builtin_int_... variables.
3549 * mi/mi-main.c (mi_cmd_data_read_memory): Likewise.
3550 * printcmd.c (do_examine): Likewise.
3551 * jv-exp.y (parse_number): Likewise.
3553 * alpha-tdep.c (alpha_register_type, alpha_push_dummy_call,
3554 alpha_store_return_value): Likewise.
3555 * amd64-linux-tdep.c (amd64_linux_register_type): Likewise.
3556 * amd64-tdep.c (amd64_register_type): Likewise.
3557 * arm-tdep.c (arm_register_type): Likewise.
3558 * avr-tdep.c (avr_register_type): Likewise.
3559 * cris-tdep.c (cris_register_type, crisv32_register_type): Likewise.
3560 * frv-tdep.c (frv_register_type): Likewise.
3561 * h8300-tdep.c h8300_register_type): Likewise.
3562 * hppa-tdep.c (hppa64_push_dummy_call, hppa32_register_type,
3563 hppa64_register_type): Likewise.
3564 * i386-tdep.c (i386_mmx_type, i386_sse_type): Likewise.
3565 * iq2000-tdep.c (iq2000_register_type): Likewise.
3566 * lm32-tdep.c (lm32_register_type, lm32_push_dummy_call): Likewise.
3567 * m32r-tdep.c (m32r_register_type): Likewise.
3568 * m68hc11-tdep.c (m68hc11_register_type, m68hc11_pseudo_register_read,
3569 m68hc11_pseudo_register_write): Likewise.
3570 * m68k-tdep.c (m68k_register_type): Likewise.
3571 * m88k-tdep.c (m88k_register_type, m88k_store_arguments): Likewise.
3572 * mep-tdep.c (mep_register_type): Likewise.
3573 * mips-tdep.c (mips_register_type, mips_pseudo_register_type,
3574 mips_print_fp_register): Likewise.
3575 * moxie-tdep.c (moxie_register_type): Likewise.
3576 * mt-tdep.c (mt_copro_register_type, mt_register_type): Likewise.
3577 * rs6000-tdep.c (rs6000_builtin_type_vec64,
3578 rs6000_builtin_type_vec128): Likewise.
3579 * score-tdep.c (score_register_type): Likewise.
3580 * sparc-tdep.c (sparc32_register_type, sparc32_store_arguments):
3582 * sparc64-tdep.c (sparc64_register_type, sparc64_store_arguments):
3584 * spu-tdep.c (spu_builtin_type_vec128, spu_register_type): Likewise.
3585 * v850-tdep.c (v850_register_type): Likewise.
3586 * xstormy16-tdep.c (xstormy16_register_type): Likewise.
3587 * xtensa-tdep.c (xtensa_register_type): Likewise.
3589 * mt-tdep.c (struct gdbarch_tdep): New data structure.
3590 (mt_gdbarch_init): Alloc TDEP structures.
3591 (mt_register_type): Cache coprocessor type in TDEP instead of
3592 static global variable.
3594 * xtensa-tdep.h (struct gdbarch_tdep): Add type_entries member.
3595 * xtensa-tdep.c (type_entries): Remove.
3596 (xtensa_register_type): Cache fixed-size types in TDEP instead
3597 of in global variable.
3599 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
3601 * gdbtypes.h (builtin_type_true_char): Remove.
3602 (builtin_type_true_unsigned_char): Likewise.
3603 (struct builtin_type): Add builtin_true_char and
3604 builtin_true_unsigned_char members.
3605 * gdbtypes.c (builtin_type_true_char): Remove.
3606 (builtin_type_true_unsigned_char): Likewise.
3607 (_initialize_gdbtypes): Do not initialize them.
3608 (gdbtypes_post_init): Initialize builtin_true_char and
3609 builtin_true_unsigned_char members of builtin_type.
3611 * printcmd.c (print_scalar_formatted): Use builtin_type
3612 members instead of builtin_type_true_char and
3613 builtin_type_true_unsigned_char.
3614 * ada-valprint.c (ada_val_print_1): Likewise.
3616 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
3618 * gdbtypes.h (builtin_type_void): Remove.
3619 * gdbtypes.c (builtin_type_void): Remove.
3620 (_initialize_gdbtypes): Do not initialize it.
3622 (safe_parse_type): Add GDBARCH argument. Use it to construct
3624 (check_stub_method): Update call.
3626 * infcall.c (call_function_by_hand): Use platform-specific type
3627 instead of builtin_type_void.
3628 * valops.c (value_cast): Use input void type instead of
3631 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
3633 * ada-lang.c (assign_component): Use platform-specific integer type
3634 instead of builtin_type_int32 type.
3635 (ada_evaluate_subexp) [OP_ATR_SIZE]: Likewise.
3637 * ax-gdb.c (gen_expr) [UNOP_NEG]: Use platform-specific integer type
3638 instead of builtin_type_int8 type.
3639 * valarith.c (value_x_unop): Likewise.
3640 * python/python-value.c (valpy_absolute): Avoid reference to
3641 builtin_type_int8 type.
3643 * eval.c (evaluate_subexp_standard): Use platform-specific integer
3644 type instead of builtin_type_int8 as EVAL_SKIP return value type.
3645 * ada-lang.c (ada_evaluate_subexp): Likewise.
3646 * jv-lang.c (evaluate_subexp_java): Likewise.
3647 * m2-lang.c (evaluate_subexp_modula2): Likewise.
3648 * scm-lang.c (evaluate_exp): Likewise.
3650 * value.h (value_bitstring): Add INDEX_TYPE argument.
3651 * valops.c (value_bitstring): Add INDEX_TYPE argument, use it instead
3652 of builtin_type_int32 as base range type.
3653 * eval.c (evaluate_subexp_standard): Update value_bitstring call.
3655 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
3657 * gdbtypes.c (lookup_array_range_type): Add prototype.
3658 (lookup_string_range_type): Likewise.
3659 * gdbtypes.c (lookup_array_range_type): New function.
3660 (lookup_string_range_type): Likewise.
3662 * ax-gdb.c (gen_repeat): Use lookup_array_range_type.
3663 * parse.c (follow_types): Likewise.
3664 * jv-lang.c (java_array_type): Likewise.
3665 * gnu-v3-abi.c (build_gdb_vtable_type): Likewise.
3666 * mt-tdep.c (mt_register_type): Likewise.
3667 * sh-tdep.c (sh_sh4_build_float_register_type): Likewise.
3668 * sh64-tdep.c (sh64_build_float_register_type): Likewise.
3669 * value.c (allocate_repeat_value): Likewise.
3670 * valops.c (value_array, value_cstring): Likewise.
3671 * valops.c (value_string): Use lookup_string_range_type.
3673 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
3675 * m2-typeprint.c (m2_print_bounds, m2_is_long_set_of_type): Remove
3676 redundant check for NULL TYPE_TARGET_TYPE.
3677 * m2-valprint.c (m2_print_long_set): Likewise.
3678 * p-valprint.c (pascal_type_print_base): Likewise.
3680 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
3682 * printcmd.c (next_gdbarch): New static variable.
3683 (set_next_address, do_examine, x_command): Set it.
3684 (decode_format): Use 'a' size to indicate width of an address.
3685 (do_examine): Add GDBARCH argument. Handle 'a' size.
3686 (x_command): Pass architecture to do_examine.
3687 Error if called without argument the first time.
3688 (do_one_display): Pass architecture to do_examine.
3690 (examine_i_type, examine_b_type, examine_h_type, examine_w_type,
3691 examine_g_type): Remove.
3692 (_initialize_printcmd): Do not initialize them.
3693 (do_examine): Use builin_type_int... instead of examine_..._type.
3695 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
3697 * gdbtypes.h (struct builtin_type): Add internal_fn member.
3698 * gdbtypes.c (gdbtypes_post_init): Initialize it.
3699 * value.c (internal_fn_type): Remove.
3700 (_initialize_values): Do not initialize it.
3702 * value.c (struct internalvar): Add enum internalvar_kind type and
3703 kind member. Restructure union internalvar_data type. Remove type,
3704 canonical, and make_value members.
3705 (init_if_undefined_command): Update for data structure changes.
3706 (create_internalvar): Likewise.
3707 (create_internalvar_type_lazy): Likewise.
3708 (get_internalvar_integer): Likewise.
3709 (get_internalvar_function): Likewise.
3710 (set_internalvar_component): Likewise.
3711 (set_internalvar): Likewise.
3712 (set_internalvar_integer): Likewise.
3713 (set_internalvar_function): Likewise.
3714 (clear_internalvar): Likewise.
3715 (add_internal_function): Likewise.
3716 (preserve_one_internalvar): New function.
3717 (preserve_values): Call it.
3719 * value.h (value_of_internalvar): Add GDBARCH parameter.
3720 (internalvar_make_value): Likewise.
3721 * value.c (value_of_internalvar): Add GDBARCH parameter. Pass it to
3722 make_value callback. Use it to generate per-architecture result value
3723 types for internal variables with no pre-defined type. Update for data
3725 (show_convenience): Pass architecture to value_of_internalvar.
3726 * eval.c (evaluate_subexp_standard): Likewise.
3727 * infrun.c (siginfo_make_value): Add GDBARCH parameter. Use it
3728 instead of current frame architecture. Return per-architecture type.
3730 * value.h (set_internalvar_string): Add prototype.
3731 * value.c (set_internalvar_string): New function.
3732 * tracepoint.c (set_traceframe_context): Use it.
3734 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
3736 * jv-lang.h (java_int_type, java_byte_type, java_short_type,
3737 java_long_type, java_boolean_type, java_char_type, java_float_type,
3738 java_double_type, java_void_type): Remove.
3739 (struct builtin_java_type): New data type.
3740 (builtin_java_type): Add prototype.
3741 (java_primitive_type): Add GDBARCH argument.
3742 (java_primitive_type_from_name): Likewise.
3743 (type_from_class): Likewise.
3745 * jv-lang.c (java_int_type, java_byte_type, java_short_type,
3746 java_long_type, java_boolean_type, java_char_type, java_float_type,
3747 java_double_type, java_void_type): Remove.
3749 (build_java_types, builtin_java_type): New functions.
3750 (java_type_data): New static variable.
3751 (_initialize_java_language): Initialize it. No longer initialize
3753 (java_language_arch_info): Use per-architecture types.
3755 (java_primitive_type): Add GDBARCH argument. Return per-architecture
3756 type instead of refering to global variable.
3757 (java_primitive_type_from_name): Add GDBARCH argument.
3758 (java_primitive_type_name): New function.
3759 (java_demangled_signature_length): Use it instead of
3760 java_primitive_type_from_name.
3761 (java_demangled_signature_copy): Likewise.
3763 (type_from_class): Add GDBARCH argument. Pass to java_link_class_type,
3764 java_primitive_type, and recursive type_from_class call.
3765 (java_link_class_type): Add GDBARCH argument. Pass to type_from_class
3766 calls. Use per-architecture types instead of global types.
3768 * jv-exp.y (parse_java_type): New define.
3769 Use per-architecture types instead of global types througout.
3771 * jv-valprint.c (java_value_print): Pass architecture to
3772 type_from_class and java_primitive_type_from_name. Use per-
3773 architecture types instead of global types.
3775 2009-07-01 Doug Evans <dje@google.com>
3777 * NEWS: Mention biarch amd64-linux gdbserver and hardware watchpoint
3778 support for i386-linux, amd64-linux, and i386-win32 builds of
3781 2009-07-01 Nick Roberts <nickrob@snap.net.nz>
3783 * Makefile.in (HFILES_NO_SRCDIR): Remove entries for deleted files.
3785 2009-06-30 Jan Kratochvil <jan.kratochvil@redhat.com>
3787 * Makefile.in (TARGET_FLAGS_TO_PASS): Include also FORCE_PARALLEL.
3788 (check//%): Construct FORCE_PARALLEL for the sub-make. Extend the
3791 2009-06-30 Paul Pluzhnikov <ppluzhnikov@google.com>
3794 * dwarf2-frame.c (dwarf2_frame_state): Move cfa_offset, cfa_reg,
3795 cfa_how and cfa_exp into regs and adjust users.
3797 2009-06-30 Daniel Jacobowitz <dan@codesourcery.com>
3799 * dwarf2read.c (inherit_abstract_dies): Work around GCC PR 40573.
3801 2009-06-30 Vladimir Prus <vladimir@codesourcery.com>
3803 * mi/mi-cmd-stack.c (parse_print_values): New.
3804 (mi_cmd_stack_list_locals, mi_cmd_stack_list_args): Use the above.
3806 2009-06-30 Vladimir Prus <vladimir@codesourcery.com>
3808 * varobj.c (varobj_get_type): Use type_to_string.
3810 2009-06-29 Pedro Alves <pedro@codesourcery.com>
3812 * infrun.c (handle_inferior_event): Context switch to the new
3813 thread when resuming for a new_thread_event.
3815 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
3817 * ada-lang.h (ada_convert_actual): Add GDBARCH argument.
3818 * ada-lang.c (convert_actual): Remove stale prototype.
3819 (ensure_lval, make_array_descriptor, ada_convert_actual):
3820 Add GDBARCH argument and pass through to subroutine calls.
3821 (ensure_lval): Use GDBARCH instead of current_gdbarch.
3822 * infcall.c (value_arg_coerce): Update ada_convert_actual call.
3824 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
3826 * ada-lang.c (resolve): Use per-architecture void type instead
3827 of platform-independent one.
3828 (ada_evaluate_subexp) [STRUCTOP_STRUCT]: Likewise.
3829 (ada_resolve_function): Reimplement fallback logic to avoid
3830 explicit reference to builtin_type_void.
3832 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
3834 * ada-valprint.c (ada_print_scalar): Accept NULL type argument
3835 to indicate scalar should be printed as default integer.
3836 (print_optional_low_bound): Pass NULL to ada_print_scalar to
3837 indicate default integer output.
3838 * ada-typeprint.c (print_range, print_range_bound): Likewise.
3839 (print_choices): Likewise. Thus, accept NULL as val_type.
3840 * ada-lang.c (ada_variant_discrim_type): Return NULL when failed
3841 to look up controlling discriminant name.
3843 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
3845 * ada-lang.c (to_fixed_range_type): Add ORIG_TYPE argument.
3846 Fall back to orig_type as index type if symbol lookup fails.
3847 Allocate result types from ORIG_TYPE's objfile.
3848 (ada_array_bound_from_type, to_fixed_array_type,
3849 ada_evaluate_subexp): Pass original index type to
3850 to_fixed_range_type. Do not pass objfile.
3852 * ada-typeprint.c (print_range_type_named): Add ORIG_TYPE argument.
3853 Fall back to orig_type as index type if symbol lookup fails.
3854 (print_array_type, ada_print_type): Pass original index type
3855 to print_range_type_named.
3857 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
3859 * ada-lang.c (ada_index_type): Update comment.
3861 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
3863 * ada-lang.c (ada_index_type): Make static. Add NAME argument.
3864 Throw error on invalid input arguments. Return NULL if unable
3865 to determine index type.
3867 (ada_array_bound_from_type): Remove TYPEP argument.
3868 (ada_array_bound): Make static. Return LONGEST instead of value.
3869 Update for ada_array_bound_from_type change.
3870 (ada_array_length): Return LONGEST instead of value.
3871 Update for ada_array_bound_from_type change.
3872 (make_array_descriptor): Update for ada_array_bound change.
3874 (ada_evaluate_subexp) [OP_ATR_RANGE, OP_ATR_FIRST, OP_ATR_LAST,
3875 OP_ATR_LENGTH]: Update for ada_array_bound_from_type,
3876 ada_array_bound, ada_array_length, ada_index_type changes.
3877 Always use ada_index_type to compute result type; fall back
3878 to architecture-specific integer type if ada_index_type fails.
3880 * ada-lang.h (ada_index_type): Remove prototype.
3881 (ada_array_bound): Likewise.
3883 2009-06-29 Pedro Alves <pedro@codesourcery.com>
3885 * dbxread.c (read_dbx_symtab): Clear has_line_numbers when ending
3888 2009-06-29 Tom Tromey <tromey@redhat.com>
3890 * README: Mention parallel check.
3892 2009-06-29 Sami Wagiaalla <swagiaal@redhat.com>
3894 * dwarf2read.c (read_import_statement): Properly set import location
3896 * cp-support.h (cp_add_using, cp_add_using_directive): Now take char*
3897 inner, char* outer arguments. Updated callers.
3899 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
3901 * value.h (value_subscript, value_subscripted_rvalue,
3902 value_bitstring_subscript, value_ptradd): Use LONGEST instead
3903 of value as type of the index argument.
3904 (value_ptrsub): Remove.
3905 * valarith.c (value_subscript, value_subscripted_rvalue,
3906 value_bitstring_subscript, value_ptradd): Use LONGEST instead
3907 of value as type of the index argument.
3908 (value_ptrsub): Remove.
3910 * wrapper.h (gdb_value_subscript): Use LONGEST instead of
3911 value as type of the index argument.
3912 * wrapper.c (gdb_value_subscript): Likewise.
3914 Update calls to gdb_value_subscript, value_subscript,
3915 value_subscripted_rvalue, value_bitstring_subscript and
3916 value_ptradd to use LONGEST instead of value as index
3917 argument type. Use value_ptradd instead of value_ptrsub.
3918 * ada-lang.c (ada_value_subscript, ada_value_ptr_subscript,
3919 ada_tag_name_2): Update.
3920 * ada-tasks.c (read_atcb): Update.
3921 * eval.c (evaluate_subexp_standard): Update.
3922 * valarith.c (value_subscript): Update.
3923 * gnu-v2-abi.c (gnuv2_virtual_fn_field): Update.
3924 * gnu-v3-abi.c (gnuv3_get_virtual_fn, gnuv3_baseclass_offset,
3925 gnuv3_method_ptr_to_value): Update.
3926 * jv-lang.c (evaluate_subexp_java): Update.
3927 * m2-lang.c (evaluate_subexp_modula2): Update.
3928 * python/python-value.c (valpy_getitem, valpy_binop): Update.
3929 * wrapper.c (gdb_value_subscript): Update.
3930 * varobj.c (c_describe_child): Update.
3932 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
3934 * gdbtypes.h (make_function_type): Remove OBJFILE parameter.
3935 * gdbtypes.c (make_function_type): Remove OBJFILE parameter.
3936 (lookup_function_type): Update call.
3937 * stabsread.c (read_type): Likewise.
3938 * dwarf2read.c (read_subroutine_type): Use lookup_function_type
3939 instead of make_function_type.
3940 * jv-lang.c (type_from_class): Likewise. Do not allocate types
3941 on the fake "dynamics" obstack.
3943 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
3945 * gdbtypes.h (struct builtin_type): Remove builtin_core_addr,
3946 nodebug_text_symbol, nodebug_data_symbol, nodebug_unknown_symbol,
3947 and nodebug_tls_symbol members.
3948 (struct objfile_type): New data structure.
3949 (objfile_type): Add prototype.
3950 * gdbtypes.c (gdbtypes_post_init): Remove initialization code
3951 for types no longer in struct builtin_type.
3952 (objfile_type_data): New static variable.
3953 (_initialize_gdbtypes): Initialize it.
3954 (objfile_type): New function.
3956 * gdbtypes.h (builtin_type_error): Remove.
3957 * gdbtypes.c (build_complex): Do not use builtin_type_error.
3958 * symtab.c (builtin_type_error): Remove.
3959 (_initialize_symtab): Remove initialization.
3961 * stabsread.c (dbx_lookup_type, define_symbol, error_type,
3962 rs6000_builtin_type, read_range_type): Use per-objfile types
3963 instead of global or per-architecture builtin types.
3964 * coffread.c (decode_type): Likewise.
3965 * dwarf2read.c (read_array_type, read_tag_string_type,
3966 new_symbol, die_type): Likewise.
3967 * mdebugread.c (parse_symbol, basic_type, upgrade_type,
3968 parse_procedure, psymtab_to_symtab_1): Likewise.
3969 * xcoffread.c (process_xcoff_symbol): Likewise.
3970 * parse.c (write_exp_msymbol): Likewise.
3972 * stabsread.c (rs6000_builtin_type_data): New static variable.
3973 (_initialize_stabsread): Initialize it.
3974 (rs6000_builtin_type): Add OBJFILE argument. Allocate builtin
3975 types per-objfile instead of globally.
3977 * stabsread.c (dbx_lookup_type): Add OBJFILE argument. Use it
3978 instead of current_objfile; pass it to rs6000_builtin_type.
3979 (dbx_alloc_type, read_type, read_range_type): Update calls.
3980 (cleanup_undefined_types_noname): Add OBJFILE argument and
3981 pass it to dbx_lookup_type.
3982 (cleanup_undefined_types): Add OBJFILE argument and pass it
3983 to cleanup_undefined_types_noname.
3984 * stabsread.h (cleanup_undefined_types): Add OBJFILE argument.
3985 * buildsym.c (end_symtab): Update call.
3987 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
3989 * darwin-nat-info.c (darwin_debug_regions_recurse): Use
3990 target_gdbarch instead of current_gdbarch.
3992 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
3994 * Makefile.in (ALL_64_TARGET_OBS): Add amd64-windows-tdep.o.
3995 (ALL_TARGET_OBS): Add moxie-tdep.o, i386-darwin-tdep.o, and
3998 * configure.tgt: Add comment.
4000 2009-06-28 Paul Pluzhnikov <ppluzhnikov@google.com>
4002 * mi/mi-cmds.c (mi_cmds): Remove unimplemented entries.
4004 2009-06-27 Daniel Jacobowitz <dan@codesourcery.com>
4005 Jan Kratochvil <jan.kratochvil@redhat.com>
4007 * NEWS: Document inlined function support.
4008 * Makefile.in (SFILES): Add inline-frame.c.
4009 (COMMON_OBS): Add inline-frame.o.
4010 * block.c (contained_in): Rewrite to use lexical nesting.
4011 (block_linkage_function): Skip inlined function blocks.
4012 (block_inlined_p): New.
4013 * block.h (struct block): Update comment.
4014 (block_inlined_p): New prototype.
4015 * blockframe.c (get_frame_block): Handle inlined functions.
4016 (get_frame_function): Do not use block_linkage_function.
4017 (block_innermost_frame): Use get_frame_block and contained_in.
4018 * breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache.
4019 Skip over inlined functions. Simplify epilogue check.
4020 (bpstat_check_breakpoint_conditions): Use get_stack_frame_id.
4022 (set_momentary_breakpoint): Only accept non-inlined frames.
4023 (watch_command_1): Use frame_unwind_caller_pc and
4024 frame_unwind_caller_id instead of get_prev_frame.
4025 (until_break_command): Likewise. Use get_stack_frame_id.
4026 * buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions.
4027 * dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function.
4028 * dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine.
4029 (read_func_scope, new_symbol): Likewise. Handle arguments specially
4030 for inlined functions without call site information.
4031 (inherit_abstract_dies): Allow tag mismatch for inlined subroutines.
4032 (die_specification): Treat DW_AT_abstract_origin as a specification.
4033 (read_type_die): Handle DW_TAG_inlined_subroutine.
4034 * frame-unwind.c (frame_unwind_init): Add inline_frame_unwind.
4035 * frame.c (fprint_frame_id): Print inline depth.
4036 (fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME.
4037 (skip_inlined_frames, get_stack_frame_id): New.
4038 (frame_unwind_caller_id): Use skip_inlined_frames.
4039 (frame_id_inlined_p): New.
4040 (frame_id_eq): Make the logic match the comments. Add inline_depth
4042 (frame_id_inner): Handle inlined functions.
4043 (frame_unwind_pc): New function, copied from frame_unwind_caller_pc.
4044 (frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc.
4045 (get_prev_frame_1): Check for inline frames. Split out frame
4046 allocation to get_prev_frame_raw.
4047 (get_prev_frame_raw): New function.
4048 (get_prev_frame): Handle inline frames.
4049 (get_frame_pc): Use frame_unwind_pc.
4050 (get_frame_address_in_block): Skip inlined frames on both sides.
4051 (pc_notcurrent): Delete.
4052 (find_frame_sal): Rewrite to handle inline call sites. Use
4053 get_frame_address_in_block.
4054 (deprecated_update_frame_pc_hack): Make static.
4055 * frame.h: Update comments.
4056 (struct frame_id): Add inline_depth.
4057 (enum frame_type): Add INLINE_FRAME.
4058 (frame_id_inlined_p, get_stack_frame_id): New prototypes.
4059 * gdbthread.h (struct thread_info): Add step_stack_frame_id field.
4060 * infcmd.c (set_step_frame): New function.
4061 (step_once): Use set_step_frame. Handle inlined functions.
4062 (until_next_command): Use set_step_frame.
4063 (finish_backward), finish_forward): Use get_stack_frame_id.
4064 (finish_command): Support inlined functions.
4065 * inferior.h (set_step_info): New prototype.
4066 * infrun.c (RESUME_ALL): Use minus_one_ptid.
4067 (clear_proceed_status): Clear step_stack_frame_id.
4068 (init_wait_for_inferior): Call clear_inline_frame_state.
4069 (init_execution_control_state): Make static.
4070 (set_step_info): New function.
4071 (init_thread_stepping_state): Do not set the symtab or line here.
4072 (stepped_in_from): New function.
4073 (handle_inferior_event): Handle inlined functions. Use set_step_info.
4074 (insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id.
4075 (struct inferior_status): Add step_stack_frame_id.
4076 (save_inferior_status, restore_inferior_status): Save and restore
4077 step_stack_frame_id.
4078 * inline-frame.c, inline-frame.h: New files.
4079 * minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC.
4080 * regcache.c (regcache_write_pc): Call reinit_frame_cache.
4081 * s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME.
4082 * stack.c (frame_show_address): New.
4083 (print_frame_info, print_frame): Use it.
4084 (find_frame_funname): Use get_frame_function. Handle inlined blocks.
4085 (frame_info): Mark inlined functions.
4086 (backtrace_command_1): Use get_current_user_frame.
4087 (print_frame_local_vars, print_frame_label_vars): Update comments.
4088 (return_command): Refuse inlined functions.
4089 * symtab.c (lookup_symbol_aux_local): Stop at inlined function
4091 (find_function_start_sal): Avoid inlined functions.
4092 (completion_list_add_fields): New function.
4093 (default_make_symbol_completion_list): Use it. Use block_static_block
4094 and block_global_block. Check for inlined functions.
4095 (skip_prologue_using_sal): Avoid line number comparison across
4097 * symtab.h (struct symbol): Add is_inlined.
4098 (SYMBOL_INLINED): New.
4099 * target.c (target_resume): Call clear_inline_frame_state.
4100 * valops.c (value_of_variable): Check block_inlined_p.
4102 2009-06-27 Daniel Jacobowitz <dan@codesourcery.com>
4104 * frame.c (frame_unwind_id): Renamed to ...
4105 (frame_unwind_caller_id): ... this. All callers updated.
4106 (frame_pc_unwind): Renamed to ...
4107 (frame_unwind_caller_pc): ... this. All callers updated.
4108 * frame.h: Document frame_unwind_caller_WHAT functions.
4109 (frame_unwind_id): Renamed to ...
4110 (frame_unwind_caller_id): ... this.
4111 (frame_pc_unwind): Renamed to ...
4112 (frame_unwind_caller_pc): ... this.
4113 * hppa-tdep.c (hppa_find_unwind_entry_in_block): Correct comment.
4114 * stack.c (parse_frame_specification_1): Do not rely on
4117 2009-06-27 Michael Snyder <msnyder@vmware.com>
4119 * infrun.c (handle_inferior_event): Improve handling of
4120 reverse-stepping into and over shared library functions.
4122 2009-06-25 Karen Osmond <karen.osmond@gmail.com>
4124 * linespec.c (find_method): Add new not_found_ptr parameter to
4125 bring in line with symtab_from_filename, decode_variable.
4126 (decode_compound): Likewise. Also propagate not_found_ptr to
4128 (decode_line_1): Propagate not_found_ptr to decode_compound.
4129 (cplusplus_error): Now throws NOT_FOUND_ERROR.
4131 2009-06-25 Karen Osmond <karen.osmond@gmail.com>
4133 * MAINTAINERS (Write After Approval): Add self.
4135 2009-06-23 Ulrich Weigand <uweigand@de.ibm.com>
4137 * valops.c (value_one): Reimplement broken decimal-float case.
4139 2009-06-23 Ulrich Weigand <uweigand@de.ibm.com>
4141 * eval.c (evaluate_subexp_standard): Use expression architecture
4142 instead of current_gdbarch.
4144 * infrun.c (handle_inferior_event): Avoid unncessary reference
4145 to current_gdbarch and get_current_frame ().
4147 2009-06-23 Ulrich Weigand <uweigand@de.ibm.com>
4149 * breakpoint.h (set_longjmp_breakpoint): Add THREAD argument.
4150 (enum bptype): Add bp_longjmp_master.
4152 * breakpoint.c (create_longjmp_master_breakpoint): New function.
4153 (update_breakpoints_after_exec): Handle bp_longjmp_master
4154 breakpoints. Call create_longjmp_master_breakpoint.
4155 (print_it_typical, bpstat_stop_status, bpstat_what,
4156 print_one_breakpoint_location, allocate_bp_location, mention,
4157 delete_command, breakpoint_re_set_one): Handle bp_longjmp_master.
4158 (breakpoint_re_set): Call create_longjmp_master_breakpoint.
4159 (create_longjmp_breakpoint): Delete.
4160 (set_longjmp_breakpoint): Add THREAD argument. Reimplement
4161 to install momentary clones of bp_longjmp_master breakpoints.
4163 * infcmd.c (step_1): Pass thread to set_longjmp_breakpoint.
4165 2009-06-23 Cary Coutant <ccoutant@google.com>
4167 * dwarf2read.c (dwarf_decode_lines): Ignore rows where is_stmt is 0.
4168 Set basic_block to 0 after a special opcode.
4170 2009-06-23 Jan Kratochvil <jan.kratochvil@redhat.com>
4172 Fix a regression by the mmap patch from 2009-06-16.
4173 * symfile.c (reread_symbols): Move sym_finish and clear_objfile_data
4174 calls before deleting the OBJFILE obstack. Extend the comment.
4176 2009-06-23 Ulrich Weigand <uweigand@de.ibm.com>
4178 * jv-lang.h (JAVA_OBJECT_SIZE): Remove.
4179 (get_java_object_header_size): Add GDBARCH parameter.
4180 * jv-lang.c (get_java_object_header_size): Add GDBARCH parameter.
4181 Use it instead of current_gdbarch.
4182 (evaluate_subexp_java): Replace JAVA_OBJECT_SIZE with call to
4183 get_java_object_header_size.
4184 * jv-valprint.c (java_value_print): Likewise.
4186 2009-06-23 Sami Wagiaalla <swagiaal@redhat.com>
4188 * dwarf2read.c (process_die): Handle import statements
4189 (DW_TAG_imported_declaration, case DW_TAG_imported_module)
4190 (read_import_statement): New.
4191 (read_func_scope): Update using_directives to point to current context
4192 (read_lexical_block_scope): Ditto.
4193 * cp-support.h: Added prototype for cp_add_using.
4194 * cp-namespace.c: Removed local context_stack.
4195 (cp_initialize_namespace): Deleted.
4196 (cp_finalize_namespace): Deleted.
4197 (cp_add_using_directive): Use using_directives instead of using_list.
4198 (cp_add_using): No longer static.
4199 * buildsym.h: Created global using_direct variable.
4200 Created using_direct variable in context_stack.
4201 * buildsym.c (finish_block): Set using directives for the block under
4203 (start_symtab): Removed call to cp_initialize_namespace().
4204 (end_symtab): Removed call to cp_finalize_namespace().
4205 (push_context): Save and reset using_directives.
4206 * block.c (block_using): Return using directives for given
4207 block instead of static block.
4209 2009-06-23 Ulrich Weigand <uweigand@de.ibm.com>
4211 * target-descriptions.h (struct type): Do not declare.
4212 (struct tdesc_type): Declare.
4213 (tdesc_named_type): Change return type to struct tdesc_type *.
4214 (tdesc_record_type): Remove.
4215 (tdesc_create_vector): Add prototype.
4216 (tdesc_create_union): Likewise.
4217 (tdesc_add_field): Likewise.
4219 * target-descriptions.c (struct tdesc_reg): Replace gdb_type
4220 member by tdesc_type member.
4221 (struct tdesc_type_field, tdesc_type_field): Add type and vector def.
4222 (struct tdesc_type, tdesc_type_p): Likewise.
4223 (struct tdesc_arch_reg, tdesc_arch_reg): Likewise.
4224 (struct tdesc_feature): Change type of "types" to VEC(tdesc_type_p).
4225 (struct tdesc_arch_data): Replace registers member by arch_regs.
4227 (tdesc_predefined_types): Change to array of pre-defined
4228 struct tdesc_type structures. Add "code_ptr" and "data_ptr".
4229 (tdesc_named_type): Return struct tdesc_type * instead of GDB type.
4230 (tdesc_gdb_type): New function.
4232 (target_find_description): Update for data structure changes.
4233 (tdesc_data_cleanup): Likewise.
4234 (tdesc_numbered_register): Likewise.
4235 (tdesc_use_registers): Likewise.
4236 (tdesc_create_reg): Likewise.
4238 (tdesc_find_arch_register): New function.
4239 (tdesc_find_register): Use it.
4240 (tdesc_register_type): Use tdesc_gdb_type to generate GDB type from
4241 tdesc_type on demand; cache generated types in tdesc_arch_reg.
4243 (tdesc_free_type): New function.
4244 (tdesc_free_feature): Call it.
4246 (tdesc_create_vector): New function.
4247 (tdesc_create_union): Likewise.
4248 (tdesc_add_field): Likewise.
4249 (tdesc_record_type): Remove.
4251 (tdesc_type_id): Remove.
4252 (maint_print_c_tdesc_cmd): Update for data structure changes. Update
4253 generated code to create tdesc_type structures instead of GDB types.
4255 * xml-tdesc.c: Do not include "gdbtypes.h".
4256 (struct tdesc_parsing_data): Change type of current_union to
4257 struct tdesc_type *.
4258 (tdesc_start_reg): Do not special-case "code_ptr" or "data_ptr".
4259 (tdesc_start_union): Call tdesc_create_union.
4260 (tdesc_start_field): Call tdesc_add_field.
4261 (tdesc_start_vector): Call tdesc_create_vector.
4262 (tdesc_end_union): Remove.
4263 (feature_children): Remove reference to tdesc_end_union.
4265 * features/arm-with-iwmmxt.c: Regenerate.
4266 * features/mips-linux.c: Regenerate.
4267 * features/mips64-linux.c: Regenerate.
4268 * features/rs6000/powerpc-32.c: Regenerate.
4269 * features/rs6000/powerpc-32l.c: Regenerate.
4270 * features/rs6000/powerpc-403.c: Regenerate.
4271 * features/rs6000/powerpc-403gc.c: Regenerate.
4272 * features/rs6000/powerpc-505.c: Regenerate.
4273 * features/rs6000/powerpc-601.c: Regenerate.
4274 * features/rs6000/powerpc-602.c: Regenerate.
4275 * features/rs6000/powerpc-603.c: Regenerate.
4276 * features/rs6000/powerpc-604.c: Regenerate.
4277 * features/rs6000/powerpc-64.c: Regenerate.
4278 * features/rs6000/powerpc-64l.c: Regenerate.
4279 * features/rs6000/powerpc-7400.c: Regenerate.
4280 * features/rs6000/powerpc-750.c: Regenerate.
4281 * features/rs6000/powerpc-860.c: Regenerate.
4282 * features/rs6000/powerpc-altivec32.c: Regenerate.
4283 * features/rs6000/powerpc-altivec32l.c: Regenerate.
4284 * features/rs6000/powerpc-altivec64.c: Regenerate.
4285 * features/rs6000/powerpc-altivec64l.c: Regenerate.
4286 * features/rs6000/powerpc-e500.c: Regenerate.
4287 * features/rs6000/powerpc-e500l.c: Regenerate.
4288 * features/rs6000/powerpc-isa205-32l.c: Regenerate.
4289 * features/rs6000/powerpc-isa205-64l.c: Regenerate.
4290 * features/rs6000/powerpc-isa205-altivec32l.c: Regenerate.
4291 * features/rs6000/powerpc-isa205-altivec64l.c: Regenerate.
4292 * features/rs6000/powerpc-isa205-vsx32l.c: Regenerate.
4293 * features/rs6000/powerpc-isa205-vsx64l.c: Regenerate.
4294 * features/rs6000/powerpc-vsx32.c: Regenerate.
4295 * features/rs6000/powerpc-vsx32l.c: Regenerate.
4296 * features/rs6000/powerpc-vsx64.c: Regenerate.
4297 * features/rs6000/powerpc-vsx64l.c: Regenerate.
4298 * features/rs6000/rs6000.c: Regenerate.
4300 2009-06-23 Joel Brobecker <brobecker@adacore.com>
4302 * ada-lang.c (decode_packed_array): If the value is a pointer to
4303 an array, then use value_ind to dereference it, not ada_value_ind.
4304 (ada_template_to_fixed_record_type_1): Handle the case where a
4305 dynamic field is an aligner type.
4306 (to_fixed_array_type): Add handling for packed array types.
4307 (ada_get_base_type): Do not follow the XVS type if the type is
4309 (ada_evaluate_subexp): Split a few statements up for clarity
4311 <OP_FUNCALL>: Add handling of the case of a packed array that
4312 has already been fixed.
4314 2009-06-23 Joel Brobecker <brobecker@adacore.com>
4316 * ada-lang.c (evaluate_subexp): Delete. Use the version from eval.c.
4317 (evaluate_subexp_type): Reimplement using evaluate_subexp.
4318 * value.h (evaluate_subexp): Add declaration.
4319 * eval.c (evaluate_subexp): Make non-static.
4320 * objc-lang.c (print_object_command): Use evaluate_subexp.
4322 2009-06-23 Paul Pluzhnikov <ppluzhnikov@google.com>
4324 Revert 2009-05-14 breakpoint commit (no longer needed).
4325 * breakpoint.h (breakpoint_re_set_objfile): Remove
4326 * breakpoint.c (breakpoint_re_set_objfile): Likewise
4327 (create_overlay_event_breakpoint): Remove objfile parameter,
4328 iterate over all objfiles.
4329 * objfiles.c (objfile_relocate): Update.
4330 * symfile.c (new_symfile_objfile): Likewise.
4332 2009-06-23 Tom Tromey <tromey@redhat.com>
4335 * c-lang.c (classify_type): Iterate over typedefs.
4336 * c-valprint.c (textual_element_type): Iterate over typedefs.
4338 2009-06-22 Tristan Gingold <gingold@adacore.com>
4340 * darwin-nat.c (darwin_xfer_partial): Use host_address_to_string
4343 2009-06-22 Jan Kratochvil <jan.kratochvil@redhat.com>
4346 * buildsym.c (block_compar): New function.
4347 (end_symtab): Replace the bubble sort by a qsort based code.
4349 2009-06-22 Sami Wagiaalla <swagiaal@redhat.com>
4351 * MAINTAINERS (Write After Approval): Add self.
4353 2009-06-22 Ulrich Weigand <uweigand@de.ibm.com>
4355 * spu-tdep.c (spu_get_longjmp_target): New function.
4356 (spu_gdbarch_init): Install it.
4358 2009-06-22 H.J. Lu <hongjiu.lu@intel.com>
4361 * remote.c (getpkt_or_notif_sane_1): Initialize val to -1.
4363 2009-06-21 Michael Snyder <msnyder@vmware.com>
4365 * inferior.h: Update ancient comment.
4367 2009-06-20 Aleksandar Ristovski <aristovski@qnx.com>
4368 Pedro Alves <pedro@codesourcery.com>
4370 * solib-svr4.c (IGNORE_FIRST_LINK_MAP_ENTRY): Avoid dereferencing
4372 (scan_dyntag): Skip if input bfd isn't elf flavoured.
4373 (locate_base): Call elf_locate_base even without an exec_bfd.
4375 2009-06-19 Samuel Bronson <naesten@gmail.com>
4378 * cli/cli-decode.c (apropos_cmd): Skip traversing abbreviations
4379 for prefix commands to avoid duplicates in the output.
4381 2009-06-19 Samuel Bronson <naesten@gmail.com>
4384 * cli/cli-decode.c (apropos_cmd): Fix avoidance of double
4387 2009-06-19 Jerome Guitton <guitton@adacore.com>
4389 * breakpoint.c (expand_line_sal_maybe): When explicit_line,
4390 skip prologue on each sals.
4391 (skip_prologue_sal): Return explicit_line and explicit_pc
4394 2009-06-19 Tristan Gingold <gingold@adacore.com>
4396 * darwin-nat.c (_initialize_darwin_inferior): Remove commented-out
4399 2009-06-19 Tristan Gingold <gingold@adacore.com>
4400 * machoread.c (macho_symtab_read): Adjust for bfd changes.
4401 * darwin-nat.h (struct darwin_exception_msg): New type to describe
4403 (struct private_thread_info): New type to describe the state of the
4405 (DEF_VEC_I thread_t): Removed, replaced by ...
4406 (DEF_VEC_O darwin_thread_t): ... this new type.
4407 (struct darwin_inferior): Renamed to ...
4408 (struct private_inferior): ... this type. Fields added.
4409 (darwin_not_port): Moved into the private inferior structure.
4410 * darwin-nat.c: Add includes, improve comments.
4411 Rewrite to handle multiple threads and processes.
4412 (darwin_resume_to): New function and protype.
4413 (darwin_resume, darwin_wait_to, darwin_wait): Ditto.
4414 (darwin_kill_inferior): Add ops argument.
4415 (darwin_pid_to_str): New function.
4416 (darwin_thread_alive): Ditto.
4417 (darwin_inf, darwin_not_port): Removed.
4418 (darwin_inf_fake_stop): New variable.
4419 (msgin, msgout, msg_state, exc_msg): Removed.
4420 (mach_check_error): Use warning instead of error.
4421 (darwin_ptrace): Adjust debug level.
4422 (cmp_thread_t): Fix names (typo).
4423 (darwin_check_new_threads): Argument is now an inferior,
4424 adjust for new structures, add no change check, ignore dead ports,
4425 handle first thread case.
4426 (find_inferior_task_it): New function.
4427 (find_inferior_notify_it): Ditto.
4428 (darwin_find_inferior_by_task): Ditto.
4429 (darwin_find_inferior_by_notify): Ditto.
4430 (darwin_find_thread): Ditto.
4431 (darwin_suspend_inferior): Ditto.
4432 (darwin_resume_inferior): Ditto.
4433 (catch_exception_raise_state): Removed.
4434 (catch_exception_raise_state_identity): Removed.
4435 (darwin_suspend_inferior_it): New function.
4436 (darwin_resume_inferior_it): Ditto.
4437 (darwin_dump_message): New function, extracted from darwin_wait.
4438 (darwin_decode_exception_message): New function.
4439 (darwin_encode_reply): New function.
4440 (catch_exception_raise): Removed.
4441 (darwin_send_reply): New function, extracted from darwin_resume.
4442 (darwin_resume_thread): New function, extracted from darwin_resume.
4443 (struct resume_inferior_threads_param): New type.
4444 (darwin_resume_inferior_threads_it): New function.
4445 (darwin_resume_inferior_threads): New function.
4446 (darwin_suspend_inferior_threads): New function.
4447 (darwin_resume): Mostly rewritten to handle multiple threads and
4449 (darwin_decode_message): New function extracted from darwin_wait.
4450 (cancel_breakpoint): New function.
4451 (darwin_wait): Mostly rewritten. Handle multiple threads.
4452 (darwin_mourn_inferior): Adjust for per process structures.
4453 (darwin_reply_to_all_pending_messages): New function.
4454 (darwin_stop_inferior): Adjust for per inferior structures.
4455 (darwin_attach_pid): Ditto.
4456 (darwin_init_thread_list): Ditto.
4457 (darwin_attach): Ditto.
4458 (darwin_detach): Ditto.
4459 (darwin_files_info): Now empty.
4460 (darwin_pid_to_str): Adjust returns string to match one expected by
4462 (darwin_read_write_inferior): Rename err variable to match other uses.
4463 Adjust debug message. Handle submaps.
4464 (darwin_xfer_memory): Adjust for per inferior structures.
4465 (set_enable_mach_exceptions): Ditto.
4466 (darwin_pid_to_exec_file): New function.
4467 (darwin_get_ada_task_ptid): Ditto.
4468 (darwin_supports_multi_process): Ditto.
4469 (_initialize_darwin_inferior): Remove useless assertion, adjust for
4470 per inferior structures. Add new target operations.
4472 2009-06-18 Hui Zhu <teawater@gmail.com>
4473 Michael Snyder <msnyder@vmware.com>
4475 * infrun.c (handle_inferior_event): Improve reverse stepping
4476 through function epilogue.
4478 * infrun.c (handle_inferior_event): Reverse-next through
4481 2009-06-18 Paul Pluzhnikov <ppluzhnikov@google.com>
4483 * dwarf2-frame.c (struct comp_unit): Use bfd_size_type for
4486 2009-06-17 Tom Tromey <tromey@redhat.com>
4488 * dwarf2read.c (zlib_decompress_section): Use a cleanup.
4490 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
4492 * gdbarch.sh (pointer_to_address): Change to type 'm'.
4493 (address_to_pointer): Likewise.
4494 * gdbarch.c, gdbarch.h: Regenerate.
4496 * inferior.h (unsigned_pointer_to_address): Add GDBARCH argument.
4497 (signed_pointer_to_address): Likewise.
4498 (unsigned_address_to_pointer, address_to_signed_pointer): Likewise.
4499 * findvar.c (unsigned_pointer_to_address): Likewise.
4500 (signed_pointer_to_address): Likewise.
4501 (unsigned_address_to_pointer, address_to_signed_pointer): Likewise.
4503 * avr-tdep.c (avr_address_to_pointer): Likewise.
4504 (avr_pointer_to_address): Likewise.
4505 * iq2000-tdep.c (iq2000_pointer_to_address): Likewise.
4506 (iq2000_address_to_pointer): Likewise.
4507 * m32c-tdep.c (m32c_m16c_address_to_pointer): Likewise.
4508 (m32c_m16c_pointer_to_address): Likewise.
4509 * spu-tdep.c (spu_pointer_to_address): Likewise.
4510 * xstormy16-tdep.c (xstormy16_pointer_to_address): Likewise.
4511 (xstormy16_address_to_pointer): Likewise.
4513 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
4515 * printcmd.c (print_scalar_formatted): Always truncate
4516 unsigned data types.
4518 * cli-dump.c (struct callback_data): Change type of load_offset
4520 (restore_binary_file): Update type casts.
4521 (restore_command): Parse load_offset as address, not long.
4523 * utils.c (string_to_core_addr): Do not sign-extend value.
4524 * varobj.c (find_frame_addr_in_frame_chain): Truncate frame_base
4525 before comparing against requested frame address.
4527 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
4529 * gdbarch.sh (gcore_bfd_target): New gdbarch callback.
4530 * gdbarch.h, gdbarch.c: Regenerate.
4532 * gcore.c (default_gcore_target): Make return value const.
4533 Call gdbarch_gcore_bfd_target if present.
4534 (default_gcore_arch, default_gcore_mach): Use target_gdbarch.
4536 * corelow.c (core_read_description): Call gdbarch_core_read_description
4537 on core_gdbarch instead of current_gdbarch.
4539 * ppc-linux-tdep.c (ppc_linux_init_abi): Install gcore_bfd_target.
4541 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
4543 * gdbtypes.c (create_string_type): Receive character type as argument.
4544 * gdbtypes.h (create_string_type): Add character type argument.
4545 * dwarf2read.c (read_tag_string_type): Pass character type to
4548 * value.h (value_string): Add character type argument.
4549 * valops.c (value_string): Add character type argument. Pass it to
4550 create_string_type. Do not allocate space in inferior.
4551 * valarith.c (value_concat): Pass character type to value_string.
4553 * value.h (value_typed_string): Rename to ...
4554 (value_cstring): ... this.
4555 * valops.c (value_typed_string): Rename to ...
4556 (value_cstring): ... this.
4557 * c-lang.c (evaluate_subexp_c): Update.
4559 * python/python-value.c (builtin_type_pychar): New define.
4560 (convert_value_from_python): Call value_cstring instead
4561 of value_from_string.
4562 * value.c (value_from_string): Remove.
4563 * value.h (value_from_string): Remove.
4565 * eval.c (evaluate_subexp_standard): Pass character type to
4566 value_string. Pass expression architecture to value_nsstring
4567 and lookup_child_selector.
4568 * objc-lang.h (lookup_objc_class): Add GDBARCH parameter.
4569 (lookup_child_selector): Likewise.
4570 (value_nsstring): Likewise.
4571 * objc-lang.c (lookup_objc_class): Add GDBARCH parameter.
4572 Pass character type to value_string..
4573 (lookup_child_selector): Likewise.
4574 (value_nsstring): Add GDBARCH parameter, use it instead of
4575 objfile architecture. Pass architecture to lookup_objc_class
4576 and lookup_child_selector. Pass character type to value_string.
4577 (end_msglist): Pass architecture to lookup_objc_class.
4578 * objc-exp.y: Pass architecture to lookup_objc_class.
4580 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
4582 * gdbtypes.h (struct language_defn): Add forward declaration.
4583 (lookup_typename): Add LANGUAGE and GDBARCH parameters.
4584 (lookup_unsigned_typename): Likewise.
4585 (lookup_signed_typename): Likewise.
4586 * gdbtypes.c (lookup_typename): Add LANGUAGE and GDBARCH parameters.
4587 Use them instead of current_language and current_gdbarch.
4588 (lookup_unsigned_typename): Add LANGUAGE and GDBARCH parameters.
4589 Pass them to lookup_typename.
4590 (lookup_signed_typename): Likewise.
4592 * c-exp.y: Pass parse_language and parse_gdbarch to
4593 lookup_unsigned_typename and lookup_signed_typename.
4594 * objc-exp.y: Likewise.
4595 * m2-exp.y: Pass parse_language and parse_gdbarch to lookup_typename.
4597 * c-lang.c (evaluate_subexp_c): Pass expression language and
4598 gdbarch to lookup_typename.
4599 * printcmd.c (printf_command): Pass current language and
4600 gdbarch to lookup_typename.
4601 * python/python-type.c (typy_lookup_typename): Likewise.
4602 Include "language.h".
4604 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
4606 * sparc64-nat.c (sparc64_gregset_supplies_p): Add GDBARCH parameter.
4607 Use it instead of current_gdbarch. Pass architecture to
4608 sparc32_gregset_supplies_p.
4609 (sparc64_fpregset_supplies_p): Add GDBARCH parameter. Use it instead
4610 of current_gdbarch. Pass architecture to sparc32_fpregset_supplies_p.
4611 * sparc64nbsd-nat.c (sparc64nbsd_gregset_supplies_p,
4612 sparc64nbsd_fpregset_supplies_p): Likewise.
4613 * sparc-nat.c (sparc_gregset_supplies_p, sparc_fpregset_supplies_p):
4614 Add GDBARCH parameter.
4615 (sparc32_gregset_supplies_p, sparc32_fpregset_supplies_p): Likewise.
4616 (sparc_fetch_inferior_registers): Pass regcache architecture to
4617 sparc_gregset_supplies_p and sparc_fpregset_supplies_p.
4618 (sparc_store_inferior_registers): Likewise.
4619 * sparc-nat.h (sparc_gregset_supplies_p, sparc_fpregset_supplies_p:
4620 Add GDBARCH parameter.
4621 (sparc32_gregset_supplies_p, sparc32_fpregset_supplies_p): Likewise.
4623 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
4625 * ada-tasks.c (read_known_tasks_array): Use target_gdbarch instead
4627 * aix-thread.c (pd_enable): Likewise.
4628 * amd64-linux-nat.c (ps_get_thread_area): Likewise.
4629 * bsd-uthread.c (bsd_uthread_activate): Likewise.
4630 * linux-nat.c (linux_nat_info_proc_cmd): Likewise.
4631 * linux-thread-db.c (enable_thread_event): Likewise.
4632 * monitor.c (monitor_write_memory, monitor_read_memory): Likewise.
4633 * nto-procfs.c (procfs_open): Likewise.
4634 * procfs.c (invalidate_cache, procfs_insert_watchpoint,
4635 info_proc_mappings, info_mappings_callback): Likewise.
4636 * record.c (record_open): Likewise.
4637 * rs6000-nat.c (ARCH64): Likewise.
4638 * solib-darwin.c (darwin_solib_create_inferior_hook): Likewise.
4639 (darwin_bfd_open): Likewise.
4640 * memattr.c (mem_info_command): Likewise.
4642 * windows-nat.c (win32_resume): Use current regcache architecture
4643 instead of current_gdbarch.
4645 * dbug-rom.c (dbug_regname): Remove check against number of
4646 registers in current_gdbarch.
4647 * solib-pa64.c (read_dynamic_info): Remove unused variable.
4649 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
4651 * dummy-frame.c (deprecated_pc_in_call_dummy): Add GDBARCH parameter,
4652 use it instead of current_gdbarch.
4653 * frame.h (deprecated_pc_in_call_dummy): Add GDBARCH parameter.
4654 * arm-tdep.c (arm_skip_prologue): Pass architecture to
4655 deprecated_pc_in_call_dummy.
4657 * symtab.c (skip_prologue_using_sal): Add GDBARCH parameter.
4658 Use it instead of current_gdbarch.
4659 * symtab.h (skip_prologue_using_sal): Add GDBARCH parameter.
4660 * breakpoint.c (expand_line_sal_maybe): Pass architecture to
4661 skip_prologue_using_sal.
4662 * arm-tdep.c (skip_prologue_using_sal): Likewise.
4663 * lm32-tdep.c (lm32_skip_prologue): Likewise.
4664 * m32-tdep.c (m32c_skip_prologue): Likewise.
4665 * mips-tdep.c (mips_skip_prologue): Likewise.
4666 * moxie-tdep.c (moxie_skip_prologue): Likewise.
4667 * mt-tdep.c (mt_frame_unwind_cache): Likewise.
4668 * rs6000-tdep.c (rs6000_skip_prologue): Likewise.
4669 * frv-tdep.c (frv_analyze_prologue): Add GDBARCH parameter, pass
4670 it to skip_prologue_using_sal. Update call sites ...
4671 (frv_skip_prologue, frv_frame_unwind_cache): ... here.
4673 * mn10300-tdep.c (struct mn10300_prologue): Add GDBARCH member.
4674 (check_for_saved): Use it instead of current_gdbarch.
4675 (mn10300_analyze_prologue): Set it.
4677 * value.c (using_struct_return): Add GDBARCH parameter. Use it
4678 instead of current_gdbarch.
4679 * value.h (using_struct_return): Add GDBARCH parameter.
4680 * eval.c (evaluate_subexp_standard): Pass architecture to
4681 using_struct_return.
4682 * infcall.c (call_function_by_hand): Likewise.
4683 * stack.c (return_command): Likewise.
4684 * sparc-tdep.c (sparc32_push_dummy_code): Likewise.
4686 * symtab.c (in_prologue): Add GDBARCH parameter. Use it instead of
4688 * symtab.h (in_prologue): Add GDBARCH parameter.
4689 * infrun.c (handle_inferior_event): Pass architecture to in_prologue.
4691 * eval.c (evaluate_subexp_standard): Use expression architecture
4692 instead of current_gdbarch.
4694 * c-lang.c (evaluate_subexp_c): Use expression architecture and
4695 language instead of current_gdbarch and current_language.
4697 * printcmd.c (do_one_display): Use expression architecture instead
4700 * infcmd.c (print_return_value): Use architecture of stop_regcache
4701 instead of current_gdbarch.
4702 (print_vector_info, print_float_info): Remove GDBARCH argument,
4703 use frame architecture instead.
4704 (vector_info, float_info): Update calls.
4706 * objc-lang.c (objc_skip_trampoline): Use frame architecture
4707 instead of current_gdbarch.
4709 * parse.c (write_dollar_variable): Use parse architecture instead
4712 * source.c (line_info): Use objfile architecture instead of
4715 * symtab.c (find_function_start_sal): Use gdbarch instead of
4717 (print_msymbol_info): Use objfile architecture instead of
4720 * valops.c (value_assign): Use frame architecture instead of
4723 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
4725 * buildsym.c (record_line): Remove call to gdbarch_addr_bits_remove.
4727 * coffread.c (coff_symtab_read): Call gdbarch_addr_bits_remove before
4728 calling record_line.
4729 (enter_linenos): Likewise.
4730 * dbxread.c (process_one_symbol): Likewise.
4731 * dwarf2read.c (dwarf_decode_lines): Likewise.
4732 * mdebugread.c (psymtab_to_symtab_1): Likewise.
4733 * xcoffread.c (enter_line_range): Likewise.
4735 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
4737 * ax-gdb.c (gen_bitfield_ref): Add EXP argument, use expression
4738 architecture instead of current_gdbarch.
4739 (gen_struct_ref): Add EXP argument, pass to get_bitfield_ref.
4740 (gen_expr): Pass expression to get_struct_ref.
4742 * symtab.h (struct symbol_ops): Add GDBARCH parameter to
4743 tracepoint_var_ref callback.
4744 * ax-gdb.c (gen_var_ref): Pass architecture to tracepoint_var_ref
4745 symbol operation callback.
4746 * dwarf2loc.c (dwarf2_tracepoint_var_ref): Add GDBARCH parameter.
4747 Use it instead of current_gdbarch.
4748 (locexpr_tracepoint_var_ref): Add GDBARCH parameter. Pass it to
4749 dwarf2_tracepoint_var_ref.
4750 (loclist_tracepoint_var_ref): Likewise.
4752 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
4754 * prologue-value.c (make_pv_area): Add ADDR_BIT argument.
4755 Use it instead of address bits of current_gdbarch.
4756 * prologue-value.c (make_pv_area): Add ADDR_BIT argument.
4757 * arm-tdep.c (thumb_analyze_prologue): Pass address bits to
4759 (arm_scan_prologue): Likewise.
4760 * m32c-tdep.c (m32c_analyze_prologue): Likewise.
4761 * mep-tdep.c (mep_analyze_prologue): Likewise.
4762 * mn10300-tdep.c (mn10300_analyze_prologue): Likewise.
4763 * s390-tdep.c (s390_analyze_prologue): Likewise.
4765 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
4767 * mi/mi-main.c (mi_cmd_data_list_register_names): Use selected
4768 frame architecture instead of current_gdbarch.
4769 (mi_cmd_data_list_changed_registers): Likewise.
4770 (mi_cmd_data_list_register_values): Likewise. Pass selected
4771 frame to get_register.
4772 (get_register): Add FRAME argument, use it as frame to retrieve
4773 registers from (instead of selected frame). Use frame architecture
4774 instead of current_gdbarch.
4775 (mi_cmd_data_write_register_values): Use current regcache
4776 architecture instead of current_gdbarch.
4778 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
4780 * tui/tui-regs.c (tui_show_register_group): Remove GDBARCH parameter;
4781 use frame architecture instead. Replace current_gdbarch uses.
4782 (tui_show_registers): Update call.
4783 (tui_get_register): Remove GDBARCH parameter; use frame architecture
4785 (tui_show_register_group): Update call.
4786 (tui_check_register_values): Likewise.
4787 (tui_register_format): Remove GDBARCH parameter; use frame
4788 architecture instead. Replace current_gdbarch uses.
4789 (tui_get_register): Update call.
4791 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
4793 * gdbarch.sh (construct_inferior_arguments): Remove.
4794 * gdbarch.c, gdbarch.h: Regenerate.
4795 * infcmd.c (get_inferior_args): Call construct_inferior_arguments
4796 directly instead of gdbarch_construct_inferior_arguments.
4797 (construct_inferior_arguments): Remove GDBARCH argument.
4798 * inferior.h (construct_inferior_arguments): Likewise.
4800 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
4802 * symfile.c (section_is_mapped): Use objfile architecture instead
4804 (TARGET_LONG_BYTES): Remove.
4805 (read_target_long_array): Add SIZE argument. Use it instead of
4807 (simple_read_overlay_table): Retrieve long size from objfile
4808 architecture; pass it to read_target_long_array.
4809 (simple_read_overlay_region_table): Likewise.
4810 (simple_overlay_update_1): Likewise.
4812 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
4814 * infrun.c (cleanup_displaced_step_closure): Remove.
4815 (displaced_step_clear_cleanup): Move to before displaced_step_prepare.
4816 (displaced_step_prepare): Use displaced_step_clear_cleanup instead
4817 of cleanup_displaced_step_closure.
4818 (handle_inferior_event, keep_going): Use thread architecture instead
4821 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
4823 * infrun.c (handle_inferior_event): Use current frame architecture
4824 or thread architecture instead of current_gdbarch. Pass to
4825 handle_step_into_function and handle_step_into_function_backward.
4826 (handle_step_into_function): Add GDBARCH parameter. Use it instead
4828 (handle_step_into_function_backward): Likewise.
4829 (insert_step_resume_breakpoint_at_frame): Use frame architecture
4830 instead of current_gdbarch.
4831 (insert_step_resume_breakpoint_at_caller): Likewise.
4833 2009-06-17 Pierre Muller <muller@ics.u-strasbg.fr>
4834 Pedro Alves <pedro@codesourcery.com>
4836 * infcmd.c (post_create_inferior): Call breakpoint_re_set after target
4837 is pushed for watchpoint promotion to hardware watchpoint.
4839 2009-06-16 Paul Pluzhnikov <ppluzhnikov@google.com>
4841 * dwarf2read.c (dwarf_info_section, dwarf_abbrev_section)
4842 (dwarf_line_section, dwarf_pubnames_section, dwarf_aranges_section)
4843 (dwarf_loc_section, dwarf_macinfo_section, dwarf_str_section)
4844 (dwarf_ranges_section, dwarf_frame_section)
4845 (dwarf_eh_frame_section): Removed.
4846 (dwarf2_resize_section): Likewise.
4847 (dwarf2_read_section): Now static, use bfd_mmap() if possible.
4848 (dwarf2_get_section_info): New function.
4849 (munmap_section_buffer): Likewise.
4850 (dwarf2_per_objfile_cleanup): Likewise.
4851 (section_is_p): Signature change.
4852 * dwarf2-frame.c (dwarf2_build_frame_info): Use
4853 dwarf2_get_section_info instead of dwarf2_read_section.
4855 2009-06-16 Paul Pluzhnikov <ppluzhnikov@google.com>
4857 * solib.c (symbol_add_stub): New FLAGS parameter.
4858 (solib_read_symbols): FROM_TTY -> FLAGS, call symbol_add_stub
4860 (solib_add): Defer breakpoint_re_set until after all solibs.
4861 * bsd-uthread.c (bsd_uthread_solib_loaded): Adjust.
4862 * rs6000-nat.c (objfile_symbol_add): Adjust.
4863 * symfile.c (syms_from_objfile): Merge parameters into ADD_FLAGS.
4864 (new_symfile_objfile): Likewise.
4865 (symbol_file_add_with_addrs_or_offsets): Likewise.
4866 (symbol_file_add_from_bfd): Likewise.
4867 (symbol_file_add): Likewise.
4868 * symfile.h (enum symfile_add_flags): New. Adjust prototypes.
4869 * symfile-mem.c (symbol_file_add_from_memory): Adjust.
4870 * windows-nat.c (safe_symbol_file_add_stub): Adjust.
4871 * machoread.c (macho_oso_symfile, macho_symfile_read): Adjust.
4873 2009-06-16 Keith Seitz <keiths@redhat.com>
4875 * linespec.c (collect_methods): Delete.
4876 (add_matching_methods): Reove destructor special case.
4877 (find_method): Call find_methods directly instead of
4879 * valops.c (value_struct_elt): Remove destructor
4881 (check_field): Likewise.
4882 (value_struct_elt_for_reference): Likewise.
4883 (destructor_name_p): Remove misleading comment about dtors
4884 being "special cases".
4885 * gdbtypes.h (get_destructor_fn_field): Remove. No longer needed.
4886 * gdbtypes.c (get_destructor_fn_field): Likewise.
4888 2009-06-16 Pedro Alves <pedro@codesourcery.com>
4890 * mi/mi-main.c (mi_cmd_data_read_memory): Dispatch
4891 TARGET_OJECT_MEMORY reads to the topmost target, not to the
4892 flattened current_target.
4894 2009-06-16 Tristan Gingold <gingold@adacore.com>
4896 * avr-tdep.c (struct gdbarch_tdep): Replace the unused field with
4898 (avr_register_name): Add const to register_names.
4899 (avr_scan_arg_moves): Move inside avr_scan_prologue.
4900 (avr_scan_prologue): Add pc_end argument.
4901 Only read prologue bytes that can be read.
4902 Limit the scan to the known prologue length.
4903 Makes pattern variables static and const.
4905 (avr_skip_prologue): Pass func_end argument to avr_scan_prologue.
4907 (avr_breakpoint_from_pc): Constify avr_break_insn.
4908 (avr_extract_return_value): Fix function comment.
4909 (avr_frame_unwind_cache): Fix GNU style violations.
4910 Pass current_pc argument to avr_scan_prologue to stop prologue
4911 analysis to the current pc. This fixes the bug with the 'next'
4913 Correctly set the SP register of the previous frame (use call_length).
4914 (avr_frame_prev_register): Fix indentation.
4915 Correctly read PC from the stack on avr6 architectures.
4916 (avr_push_dummy_call): Fix indentation.
4917 (avr_gdbarch_init): Set call_length according to the architecture.
4919 2009-06-15 Phil Muldoon <pmuldoon@redhat.com>
4921 * infcall.c (show_unwind_on_terminating_exception_p): New
4923 (call_function_by_hand): Create breakpoint and clean-up call for
4924 std::terminate.breakpoint. Add unwind_on_terminating_exception_p
4925 gate. Pop frame on breakpoint hit.
4926 (_initialize_infcall): Add add_setshow_boolean_cmd for
4927 unwind-on-terminating-exception.
4929 2009-06-12 Kevin Buettner <kevinb@redhat.com>
4931 * dwarf2read.c (dwarf2_psymtab_to_symtab): Propagate
4932 `has_section_at_zero' flag from stripped objfile to separate,
4933 debug info only, objfile.
4935 2009-06-12 Pedro Alves <pedro@codesourcery.com>
4937 * exec.h (section_table_xfer_memory_partial): Improve description,
4938 mention SECTION_NAME.
4939 * exec.c (section_table_xfer_memory_partial): Remove stale
4942 2009-06-11 Aleksandar Ristovski <aristovski@qnx.com>
4944 * nto-tdep.h (nto_generic_supply_gpregset)
4945 (nto_generic_supply_fpregset, nto_generic_supply_altregset): Remove.
4946 * nto-tdep.c (nto_generic_supply_gpregset)
4947 (nto_generic_supply_fpregset, nto_generic_supply_altregset): Remove.
4949 2009-06-11 Aleksandar Ristovski <aristovski@qnx.com>
4951 * i386-nto-tdep.c (I386_NTO_SIGCONTEXT_OFFSET): Remove define.
4952 (i386nto_sigcontext_addr): Change the way context address is calculated.
4953 (i386nto_init_abi): Remove usage of deprecated sc_reg_offset and
4954 sc_sp_offset and set sc_reg_offset and sc_num_regs.
4956 2009-06-11 Aleksandar Ristovski <aristovski@qnx.com>
4958 * i386-nto-tdep.c (i386_nto_target): Remove definition.
4959 (init_i386nto_ops): Use macros to set fields to global
4960 current_nto_target directly.
4961 (i386nto_init_abi): Remove unused nto_set_target call.
4962 * nto-tdep.h (nto_set_target): Remove unused declaration.
4963 * nto-tdep.c (nto_set_target): Remove unused function.
4965 2009-06-11 Pedro Alves <pedro@codesourcery.com>
4967 * breakpoint.c (break_command_really): Rename local variable
4968 breakpoint_chain to bkpt_chain.
4970 2009-06-11 Aleksandar Ristovski <aristovski@qnx.com>
4972 Add support for XMM registers.
4973 * i386-nto-tdep.c (i386nto_regset_id): Add case for SSE register set.
4974 (i386nto_register_area): Correctly calculate offsets and sizes for
4975 all supported registers.
4977 2009-06-11 Tom Tromey <tromey@redhat.com>
4979 * eval.c (evaluate_subexp_standard) <OP_OBJC_MSGCALL>: Remove
4980 'static' from local variable definitions.
4982 2009-06-11 Pedro Alves <pedro@codesourcery.com>
4984 * symtab.c (append_expanded_sal): Remove unused local variables.
4986 2009-06-11 Pedro Alves <pedro@codesourcery.com>
4988 * infrun.c (sched_multi): New global.
4989 (resume): If sched_multi is set, resume only threads of the
4991 (prepare_to_proceed): Don't switch over to wait_ptid if we're
4992 resuming a different inferior, and sched_multi is off.
4993 (show_schedule_multiple): New.
4994 (_initialize_infrun): Register new "set schedule-multiple" command.
4995 * inferior.h (sched_multi): Declare.
4996 * NEWS: Mention new "schedule-multiple" setting.
4998 2009-06-11 Pedro Alves <pedro@codesourcery.com>
5000 * varobj.c (varobj_create): Properly restore the selected frame.
5002 2009-06-05 Tom Tromey <tromey@redhat.com>
5004 * inferior.c (print_inferior): Make a table, not a list. Emit
5007 2009-06-10 Jonas Maebe <jonas.maebe@elis.ugent.be>
5009 * darwin-nat.c (darwin_stop_inferior): Pass 0 as options to
5010 darwin_wait (blocking wait).
5011 (darwin_kill_inferior): Likewise.
5013 2009-06-10 Pedro Alves <pedro@codesourcery.com>
5015 * infrun.c (handle_inferior_event): Update comment around trying
5016 to revert back to a stepping thread that has exited.
5018 2009-06-10 Cary Coutant <ccoutant@google.com>
5020 * dwarf2read.c (dwarf_decode_lines): Recognize and ignore
5021 DW_LNE_set_discriminator.
5023 2009-06-10 Pierre Muller <muller@ics.u-strasbg.fr>
5025 * breakpoint.c: ARI fixes.
5026 (create_overlay_event_breakpoint): Avoid assignment inside if statement.
5027 (print_one_breakpoint_location): Likewise.
5028 (create_longjmp_breakpoint): Likewise.
5029 (tracepoint_save_command): Likewise
5030 (bpstat_find_step_resume_breakpoint): No operator at end of line.
5031 (bpstat_stop_status): Likewise.
5032 (describe_other_breakpoints): Likewise.
5033 (hw_watchpoint_used_count): Likewise.
5034 (expand_line_sal_maybe): Likewise.
5035 (break_command_really): Likewise.
5036 (delete_command): Likewise.
5037 (do_enable_breakpoint): Likewise.
5038 (delete_trace_command): Likewise.
5039 (catch_exception_command_1): Likewise and remove extra parentheses.
5041 2009-06-08 Pierre Muller <muller@ics.u-strasbg.fr>
5043 * breakpoint.c (_initialize_breakpoint): Remove "bu" command alias of
5044 "ubreak" command that does not exist.
5046 2009-06-08 Pierre Muller <muller@ics.u-strasbg.fr>
5048 * cli/cli-decode.c (add_alias_cmd): Correct assertion.
5050 2009-06-07 Pedro Alves <pedro@codesourcery.com>
5052 * hppa-tdep.c (_initialize_hppa_tdep): Add declaration.
5054 2009-06-07 Pedro Alves <pedro@codesourcery.com>
5057 * proc-utils.h (procfs_first_available): Don't declare here.
5058 * sol-thread.c: Include procfs.h instead of sys/procfs.h and
5060 * procfs.c: Include procfs.h.
5061 (procfs_target): Make it public. Don't register
5062 procfs_can_use_hw_breakpoint here.
5063 (proc_set_watchpoint): Check for PCWATCH or PIOCSWATCH being
5064 defined instead of TARGET_HAS_HARDWARE_WATCHPOINTS.
5065 (procfs_can_use_hw_breakpoint): Remove check of
5066 TARGET_HAS_HARDWARE_WATCHPOINTS.
5067 (procfs_use_watchpoints): Register procfs_can_use_hw_breakpoint
5069 (_initialize_procfs): Don't add the procfs target here.
5071 * i386-sol2-nat.c: Include target.h and procfs.h.
5072 (_initialize_amd64_sol2_nat): Install the procfs target here,
5073 customized with watchpoints support.
5074 * irix5-nat.c: Include target.h.
5075 (_initialize_core_irix5): Rename to ...
5076 (_initialize_irix5_nat): ... this. Install the procfs target
5077 here, customized with watchpoints support.
5078 * alpha-nat.c: Include procfs.h.
5079 (_initialize_core_alpha): Rename to...
5080 (_initialize_alpha_nat): ... this. Install the procfs target
5081 here, customized with watchpoints support.
5082 * sparc-sol2-nat.c: Include target.h and procfs.h.
5083 (_initialize_sparc_sol2_nat): New.
5085 * config/i386/nm-i386sol2.h (TARGET_HAS_HARDWARE_WATCHPOINTS): Delete.
5086 * config/sparc/nm-sol2.h (TARGET_HAS_HARDWARE_WATCHPOINTS): Delete.
5087 * config/mips/irix5.mh (NAT_FILE): Delete.
5088 * config/mips/irix6.mh (NAT_FILE): Delete.
5089 * config/mips/nm-irix5.h: Delete.
5091 20009-06-07 Pedro Alves <pedro@codesourcery.com>
5093 * auxv.c (procfs_xfer_auxv): Change type of the `object' argument
5094 to enum target_object. Cleanup comments.
5095 * auxv.h: Include "target.h". Cleanup comments to not mention
5096 NATIVE_XFER_AUXV anymore.
5098 2009-06-07 Pedro Alves <pedro@codesourcery.com>
5100 * inferior.h (procfs_first_available): Move declaration to...
5101 * proc-utils.h: ... here.
5102 * sol-thread.c: Include procfs.h and proc-utils.h.
5104 2009-06-07 Pedro Alves <pedro@codesourcery.com>
5106 * inferior.h (proc_iterate_over_mappings): Delete declaration.
5107 * nto-tdep.h (proc_iterate_over_mappings): Delete declaration.
5108 * procfs.c (proc_iterate_over_mappings): Delete.
5110 2009-06-07 Pedro Alves <pedro@codesourcery.com>
5112 * target.h (struct target_ops): Make to_has_all_memory,
5113 to_has_memory, to_has_stack, to_has_registers and to_has_execution
5114 methods instead of variables.
5115 (target_has_all_memory_1, target_has_memory_1, target_has_stack_1)
5116 (target_has_registers_1, target_has_execution_1): Declare
5118 (target_has_all_memory): Rewrite to call target_has_all_memory_1.
5119 (target_has_memory): Rewrite to call target_has_memory_1.
5120 (target_has_stack): Rewrite to call target_has_all_stack_1.
5121 (target_has_registers): Rewrite to call target_has_registers_1.
5122 (target_has_execution): Rewrite to call target_has_execution_1.
5123 (default_child_has_all_memory, default_child_has_memory)
5124 (default_child_has_stack, default_child_has_registers)
5125 (default_child_has_execution): Declare.
5126 (target_mark_running, target_mark_exited): Delete declarations.
5127 * target.c (default_child_has_all_memory,
5128 default_child_has_memory, default_child_has_stack,
5129 default_child_has_registers, default_child_has_execution): New.
5130 (target_has_all_memory_1, target_has_memory_1, target_has_stack_1,
5131 target_has_registers_1, target_has_execution_1): New.
5132 (add_target): Default the to_has_all_memory, to_has_all_memory,
5133 to_has_memory, to_has_stack, to_has_registers and to_has_execution
5134 callbacks to return 0.
5135 (update_current_target): Do not inherit to_has_all_memory,
5136 to_has_memory, to_has_stack, to_has_registers or to_has_execution.
5137 (target_mark_running, target_mark_exited): Delete.
5138 (memory_xfer_partial): Adjust.
5139 (target_read_memory, target_write_memory, target_search_memory):
5140 Dispatch to the the top-most target, not the flattened
5142 (target_info): Adjust.
5143 (init_dummy_target): Install return_zero as callback for
5144 to_has_all_memory, to_has_memory, to_has_stack, to_has_registers,
5146 (set_maintenance_target_async_permitted): Use have_live_inferiors
5147 instead of target_has_execution.
5148 * target-memory.c (target_write_memory_blocks): Dispatch memory
5149 writes to the the top-most target, not the flattened
5152 * breakpoint.c (insert_breakpoints): Don't check for
5153 target_has_execution here.
5154 (update_global_location_list): Check if there are live inferiors
5155 to debug instead of target_has_execution.
5156 * infcmd.c (kill_command, detach_command): Check if there are
5157 inferiors instead of target_has_execution.
5158 * inferior.h (have_live_inferiors): Declare.
5159 * inferior.c (have_live_inferiors): New.
5160 * infrun.c (normal_stop): Don't check for target_has_execution to
5161 finish the thread states.
5162 * thread.c (is_thread_state, is_stopped, is_exited, is_running)
5163 (any_running, is_executing): Remove checks for
5164 target_has_execution.
5165 * top.c (kill_or_detach): Don't try to kill core inferiors.
5166 (quit_target): Don't check for target_has_execution.
5168 * corelow.c (core_has_memory, core_has_stack, core_has_registers):
5170 (init_core_ops): Install core_has_memory, core_has_stack and
5172 * exec.c (exec_has_memory): New.
5173 (init_exec_ops): Install exec_has_memory.
5174 * remote.c (remote_add_inferior): Don't call target_mark_running.
5175 (remote_start_remote): Don't call target_mark_exited or call
5176 target_mark_running.
5177 (remote_open_1): Use have_inferiors instead of
5178 target_has_execution. Don't use target_mark_exited.
5179 (init_remote_ops): Install deafult_child_has_all_memory,
5180 default_child_has_memory, default_child_has_stack,
5181 default_child_has_registers, default_child_has_execution.
5182 * bsd-kvm.c (bsd_kvm_return_one): New.
5183 (bsd_kvm_add_target): Register bsd_kvm_return_one as
5184 to_has_memory, to_has_stack and to_has_registers callbacks.
5185 * remote-m32r-sdi.c (m32r_return_one): New.
5186 (init_m32r_ops): Register it.
5187 * inf-child.c (inf_child_target): Adjust to register
5188 default_child_has_all_memory, default_child_has_memory,
5189 default_child_has_stack, default_child_has_registers,
5190 default_child_has_execution callbacks.
5191 * gnu-nat.c (init_gnu_ops): Likewise.
5192 * go32-nat.c (init_go32_ops): Likewise.
5193 * hpux-thread.c (init_hpux_thread_ops): Likewise.
5194 * monitor.c (init_base_monitor_ops): Likewise.
5195 * nto-procfs.c (init_procfs_ops): Likewise.
5196 * remote-mips.c (_initialize_remote_mips): Likewise.
5197 * windows-nat.c (init_windows_ops): Likewise.
5198 * remote-sim.c (gdbsim_create_inferior): Don't use
5199 target_mark_running or target_mark_exited.
5200 (gdbsim_mourn_inferior): Don't call target_mark_exited.
5201 (init_gdbsim_ops): Adjust to register
5202 default_child_has_all_memory, default_child_has_memory,
5203 default_child_has_stack, default_child_has_registers,
5204 default_child_has_execution callbacks.
5206 * linux-nat.c (linux_nat_xfer_partial): If reading memory, and
5207 there's no inferior selected, defer to a lower stratum.
5209 2009-06-05 Tom Tromey <tromey@redhat.com>
5211 * varobj.c (update_dynamic_varobj_children): Wrap error text in
5213 (install_visualizer): Likewise.
5214 (varobj_set_visualizer): Likewise.
5216 2009-06-05 Marc Khouzam <marc.khouzam@ericsson.com>
5218 * mi/mi-main.c (mi_cmd_exec_continue)
5219 (mi_cmd_exec_interrupt): Adjust parsing of thread group
5220 ids to current reality, where they don't have any 'p' prefix.
5222 2009-06-05 Aleksandar Ristovski <aristovski@qnx.com>
5224 * corelow.c (core_open): Check for core_gdbarch before calling
5225 gdbarch_target_signal_from_host.
5227 2009-06-05 Tom Tromey <tromey@redhat.com>
5229 * c-exp.y (parse_number): Don't use K&R definition.
5231 (yyerror): Likewise.
5233 2009-06-04 Jan Kratochvil <jan.kratochvil@redhat.com>
5235 * varobj.c (varobj_update): Fix out of scope varobjs to not to change.
5237 2009-06-04 Ulrich Weigand <uweigand@de.ibm.com>
5239 * symtab.h: Rename SYMBOL_OPS to SYMBOL_COMPUTED_OPS.
5240 * ax-gdb.c (gen_var_ref): Likewise.
5241 * findvar.c (read_var_value, symbol_read_needs_frame): Likewise.
5242 * printcmd.c (address_info): Likewise.
5243 * dwarf2loc.c (dwarf_expr_frame_base): Likewise.
5244 * dwarf2read.c (dwarf2_symbol_mark_computed): Likewise.
5245 * symtab.h: Rename struct symbol_ops to struct symbol_computed_ops.
5246 * dwarf2loc.h: Likewise.
5247 * dwarf2loc.c (dwarf2_locexpr_funcs, dwarf2_loclist_funcs): Likewise.
5249 * symtab.h: (struct symbol_register_ops): New struct definition.
5250 (struct symbol): Make "ops" member a union of symbol_computed_ops and
5251 symbol_register_ops callback pointers.
5252 (SYMBOL_REGISTER_OPS): New macro.
5253 * tracepoint.c: Include "objfiles.h".
5254 (scope_info, collect_symbol): Use SYMBOL_REGISTER_OPS register_number
5255 callback to retrieve register numbers.
5256 * ax-gdb.c (gen_var_ref): Likewise.
5257 * findvar.c (read_var_value): Likewise.
5258 * printcmd.c (address_info): Likewise.
5260 * coffread.c (coff_reg_to_regnum): New function.
5261 (coff_register_funcs): New static variable.
5262 (process_coff_symbol): Do not call gdbarch_sdb_reg_to_regnum.
5263 Install SYMBOL_REGISTER_OPS callbacks.
5264 * mdebugread.c (mdebug_reg_to_regnum): New function.
5265 (mdebug_register_funcs): New static variable.
5266 (parse_symbol): Do not call gdbarch_ecoff_reg_to_regnum.
5267 Install SYMBOL_REGISTER_OPS callbacks.
5268 * stabsread.c (stab_reg_to_regnum): New function.
5269 (stab_register_funcs): New static variable.
5270 (define_symbol): Do not call gdbarch_stab_reg_to_regnum.
5271 Install SYMBOL_REGISTER_OPS callbacks.
5273 2009-06-03 Doug Evans <dje@google.com>
5275 * symfile.c (reread_symbols): Reset psymtabs_addrmap to NULL
5276 after discarding its contents.
5278 2009-06-03 Pedro Alves <pedro@codesourcery.com>
5280 * target.c: Include "exec.h".
5281 (update_current_target): Don't inherit to_sections or
5283 (target_get_section_table): New.
5284 (target_section_by_addr): Fetch the section table from the passed
5286 (memory_xfer_partial): Handle unmapped overlay sections before
5287 anything else. Get the overlay mapped address here. Adjust to
5288 use section_table_xfer_memory_partial.
5289 (get_target_memory): Request a TARGET_OBJECT_RAW_MEMORY object
5290 instead of TARGET_OBJECT_MEMORY.
5291 (target_resize_to_sections): Delete.
5292 (remove_target_sections): Adjust to remove target sections from
5293 `current_target_sections', and use resize_section_table.
5294 * target.h (struct target_ops) <to_sections, to_sections_end>:
5296 <to_get_section_table>: New method.
5297 (xfer_memory, print_section_info): Delete declarations.
5298 (struct target_section_table): New type.
5299 (target_get_section_table): Declare.
5300 (target_resize_to_sections): Delete declaration.
5301 (remove_target_sections): Delete declaration.
5302 * bfd-target.c (target_bfd_xfer_partial): Get the section table
5304 (target_bfd_get_section_table): New.
5305 (target_bfd_xclose): Adjust.
5306 (target_bfd_reopen): Store the section table in the to_data field.
5307 * corelow.c (core_data): New.
5308 (core_close): Adjust to release core_data and its sections.
5309 (core_open): Allocate core_data, and build its target sections
5311 (deprecated_core_resize_section_table): New.
5312 (core_files_info): Pass core_data to print_section_info.
5313 (core_xfer_partial): Adjust to use
5314 section_table_xfer_memory_partial for TARGET_OBJECT_MEMORY xfers.
5315 (init_core_ops): Do not install a deprecated_xfer_memory callback
5317 * solib.c (update_solib_list): Add the shared library sections
5318 to the current target sections table.
5319 * exec.c (current_target_sections_1): New global.
5320 (current_target_sections): New global.
5321 (exec_close_1): New function, refactored from exec_close. Remove
5322 the exec_bfd's sections from the current target sections table.
5323 Adjust to not use to_sections.
5324 (exec_close): Remove all target sections. Call exec_close_1.
5325 (exec_file_clear): Use exec_close_1 instead of unpushing the
5327 (exec_file_attach): Likewise. Adjust to not use to_sections. Add
5328 exec_bfd's sections to the current target sections table. Don't
5329 push the exec_ops target here.
5330 (resize_section_table): New.
5331 (add_target_sections): New.
5332 (remove_target_sections): Moved here.
5333 (section_table_xfer_memory): Adjust to implement the xfer_partial
5334 interface, and rename to...
5335 (section_table_xfer_memory_partial): ... this, replacing the
5336 current function of that same name.
5337 (exec_get_section_table): New.
5338 (exec_xfer_partial): New.
5339 (xfer_memory): Delete.
5340 (print_section_info): Replace the target_ops parameter by a
5341 target_section_table parameter.
5342 (exec_files_info, set_section_command, exec_set_section_address):
5343 Adjust to use the current sections table.
5344 (init_exec_ops): Do not register a deprecated_xfer_memory
5345 callback. Register to_xfer_partial and to_get_section_table
5347 * infrun.c (handle_inferior_event): Update comments around
5349 * rs6000-nat.c (xcoff_relocate_core): Adjust to use
5350 deprecated_core_resize_section_table.
5351 * exec.h (resize_section_table): Declare.
5352 (section_table_xfer_memory_partial): Add const char * argument.
5353 (remove_target_sections): Declare here.
5354 (add_target_sections): Declare.
5355 (print_section_info): Declare here.
5356 * gdbcore.h (deprecated_core_resize_section_table): Declare.
5358 2009-06-03 Ulrich Weigand <uweigand@de.ibm.com>
5360 * value.h (struct internalvar): Remove.
5361 (get_internalvar_integer): Add prototype.
5362 (set_internalvar_integer): Add prototype.
5363 (clear_internalvar): Add prototype.
5365 * value.c (struct internalvar): Move here. Add type member. Remove
5366 endian member. Add union_internalvar member instead of value member.
5367 (init_if_undefined_command): Use intvar->type.
5368 (create_internalvar): Do not initialize value/endian, but type.
5369 (create_internalvar_type_lazy): Call create_internalvar.
5370 (value_of_internalvar): Handle host-side internalvar contents.
5371 (set_internalvar_component): Likewise.
5372 (set_internalvar): Likewise.
5373 (get_internalvar_integer): New function.
5374 (clear_internalvar): Likewise.
5375 (set_internalvar_integer): Likewise.
5376 (preserve_values): Handle host-side internalvar contents.
5378 * breakpoint.c (set_breakpoint_count, set_tracepoint_count): Call
5379 set_internalvar_integer instead of set_internalvar.
5380 * findcmd.c (find_command): Likewise.
5381 * infrun.c (handle_inferior_event): Likewise.
5382 * source.c (forward_search_command, reverse_search_command): Likewise.
5383 * tracepoint.c (set_traceframe_num, set_tracepoint_num,
5384 set_traceframe_context): Likewise.
5386 * printcmd.c (x_command): Call clear_internalvar instead of
5388 * tracepoint.c (set_traceframe_context): Likewise.
5390 * breakpoint.c (get_number_trailer): Call get_internalvar_integer
5391 instead of value_of_internalvar.
5392 * linespec.c (decode_dollar): Likewise.
5394 * expprint.c (dump_subexp_body_standard): Use internalvar_name
5395 instead of accessing internalvar private elements.
5396 * valops.c (value_assign): Copy from original source instead of
5397 accessing internalvar private elements.
5399 2009-06-03 Ulrich Weigand <uweigand@de.ibm.com>
5401 * scm-lang.c (builtin_type_scm): Remove.
5402 (scm_lookup_name): Add GDBARCH parameter. Use it instead of
5403 objfile architecture. Use per-architecture builtin_scm_type instead
5404 of builtin_type_scm.
5405 (evaluate_exp): Pass expression architecture to scm_lookup_name.
5407 (scm_get_field): Add SIZE parameter. Use it instead of
5408 TYPE_LENGTH (builtin_type_scm).
5410 (build_scm_types): New function.
5411 (scm_type_data): New variable.
5412 (builtin_scm_type): New function.
5413 (_initialize_scheme_language): Do not initialize builtin_type_scm.
5414 Register build_scm_types as post-init function for scm_type_data.
5416 * scm-exp.c (scm_lreadr): Use per-architecture builtin_scm_type
5417 instead of builtin_type_scm.
5419 * scm-lang.h (SCM_CAR, SCM_CDR): Pass SCM_SIZE to scm_get_field.
5420 (scm_get_field): Add SIZE paramter.
5421 (scm_scmval_print): Remove prototype.
5422 (builtin_type_scm): Remove.
5423 (struct builtin_scm_type): Add structure definition.
5424 (builtin_scm_type): Add prototype.
5426 * scm-valprint.c (scm_inferior_print): Add TYPE parameter. Use it
5427 instead of builtin_core_addr type; do not use objfile architecture.
5428 (scm_scmlist_print): Add TYPE parameter. Use it to define SCM_SIZE.
5429 Pass type to scm_scmval_print.
5430 (scm_ipruk): Add TYPE parameter. Use it to define SCM_SIZE.
5431 (scm_scmval_print): Make static. Add TYPE parameter. Use it to
5432 define SCM_SIZE. Pass type to scm_ipruk and scm_scmlist_print.
5433 (scm_val_print): Pass type to scm_inferior_print and scm_scmval_print.
5435 2009-06-03 Ulrich Weigand <uweigand@de.ibm.com>
5437 * mdebugread.c (mdebug_type_void, mdebug_type_char, mdebug_type_short,
5438 mdebug_type_int, mdebug_type_int_32, mdebug_type_int_64,
5439 mdebug_type_long_32, mdebug_type_long_64, mdebug_type_long_long_64,
5440 mdebug_type_unsigned_char, mdebug_type_unsigned_short,
5441 mdebug_type_unsigned_int_32, mdebug_type_unsigned_int_64,
5442 mdebug_type_unsigned_long_32, mdebug_type_unsigned_long_64,
5443 mdebug_type_unsigned_long_long_64, mdebug_type_adr_32,
5444 mdebug_type_adr_64, mdebug_type_float, mdebug_type_double,
5445 mdebug_type_complex, mdebug_type_double_complex,
5446 mdebug_type_fixed_dec, mdebug_type_float_dec, mdebug_type_string):
5449 (basic_type_data): New global variable.
5450 (basic_type): New function.
5451 (parse_type): Remove static basic type map map_bt. Call basic_type
5452 to get basic types instead of using mdebug_type_ variables.
5454 (parse_symbol): Use builtin types instead of mdebug_type_ variables.
5455 (upgrade_type): Likewise.
5456 (parse_procedure): Likewise.
5457 (psymtab_to_symtab_1): Likewise.
5459 (_initialize_mdebugread): Do not initialize mdebug_type_ variables.
5460 Initialize basic_type_data.
5462 2009-06-03 Ulrich Weigand <uweigand@de.ibm.com>
5464 * dfp.h (decimal_binop): Convert LEN_RESULT to input parameter.
5465 * dfp.c (promote_decimal): Remove.
5466 (decimal_binop): Convert LEN_RESULT to input parameter.
5467 Remove call to decimal_binop.
5468 (decimal_compare): Remove call to decimal_binop.
5470 * valarith.c (value_binop): Pass desired result type length
5473 2009-06-01 Tristan Gingold <gingold@adacore.com>
5475 * configure.tgt (avr): Set gdb_sim to use the simulator.
5477 2009-05-29 Doug Evans <dje@google.com>
5479 * infrun.c (prepare_to_proceed): Document. Assert !non_stop.
5480 If scheduler-locking is enabled, we're not going to be singlestepping
5481 any other previously stopped thread.
5483 2009-05-29 Pedro Alves <pedro@codesourcery.com>
5485 * mi/mi-interp.c (mi_on_resume): Initialize `count' to 0.
5487 2009-05-29 Eli Zaretskii <eliz@gnu.org>
5489 * i386-tdep.c (i386_go32_init_abi): Use SVR4 register numbering
5490 for stabs and COFF debug info.
5492 2009-05-28 Pedro Alves <pedro@codesourcery.com>
5494 * infrun.c (handle_inferior_event): When thread hoping, switch
5495 inferior_ptid to the event thread before removing breakpoints from
5496 the target. If not stopping, also try to revert back to a thread
5497 that was doing a "next". Check if that thread still exists before
5499 (currently_stepping_thread): Delete and merge with ...
5500 (currently_stepping): ... this.
5501 (currently_stepping_callback): Rename to ...
5502 (currently_stepping_or_nexting_callback): ... this, and also
5503 return true if the thread was stepping over a call (has a
5504 step-resume breakpoint).
5506 2009-05-28 Tom Tromey <tromey@redhat.com>
5508 * python/python.c (gdbpy_parameter): Rename. Fix error message.
5509 (GdbMethods): Change "get_parameter" to "parameter".
5511 2009-05-28 Pierre Muller <muller@ics.u-strasbg.fr>
5512 Paul Pluzhnikov <ppluzhnikov@google.com>
5514 * configure.ac (!have_libpython): Add python-prettyprint source
5516 * configure: Regenerate.
5517 * python/python-prettyprint.c: Move "#ifdef HAVE_PYTHON" before
5520 2009-05-27 Vladimir Prus <vladimir@codesourcery.com>
5521 Tom Tromey <tromey@redhat.com>
5522 Thiago Jung Bauermann <bauerman@br.ibm.com>
5524 * mi/mi-main.c (mi_cmd_list_features): List "python" feature.
5525 * varobj.h (varobj_set_visualizer): Declare.
5526 (varobj_get_display_hint): Likewise.
5527 (varobj_update_result_t) <children_changed, value_installed>: New
5529 * mi/mi-cmds.c (mi_cmds): Add var-set-visualizer.
5530 * mi/mi-cmds.h (mi_cmd_var_set_visualizer,
5531 mi_cmd_var_set_child_range): Declare.
5532 * mi/mi-cmd-var.c (mi_cmd_var_set_visualizer): New function.
5533 (mi_cmd_var_list_children): Emit display hint.
5534 (varobj_update_one): Emit display hint. Handle dynamic children.
5535 * python/python.c (GdbMethods): Add "default_visualizer".
5536 * python/python-internal.h (apply_varobj_pretty_printer,
5537 gdbpy_get_varobj_pretty_printer, gdbpy_get_display_hint):
5539 (gdbpy_default_visualizer): Likewise.
5540 * varobj.c: Include python.h, python-internal.h.
5541 (PyObject): New typedef.
5542 (struct varobj) <children_requested, pretty_printer>: New fields.
5543 (varobj_create): Call install_default_visualizer.
5544 (instantiate_pretty_printer): New function.
5545 (varobj_set_display_format): Update.
5546 (varobj_get_display_hint): New function.
5547 (update_dynamic_varobj_children): New function.
5548 (varobj_get_num_children): Handle dynamic children.
5549 (varobj_list_children): Likewise.
5550 (install_new_value): Likewise.
5551 (varobj_add_child): New function.
5552 (install_visualizer): Likewise.
5553 (install_default_visualizer): Likewise.
5554 (varobj_set_visualizer): Likewise.
5555 (varobj_update): Handle dynamic children.
5556 (create_child): Use create_child_with_value.
5557 (create_child_with_value): New function.
5558 (value_get_print_value): Call pretty printer. Add value_formatter
5560 (c_value_of_variable): Update.
5561 (varobj_invalidate): Always free all_rootvarobj.
5562 * python/python-prettyprint.c (apply_varobj_pretty_printer): New
5564 (gdbpy_get_varobj_pretty_printer): Likewise.
5565 (gdbpy_default_visualizer): Likewise.
5567 2009-05-27 Tom Tromey <tromey@redhat.com>
5568 Thiago Jung Bauermann <bauerman@br.ibm.com>
5569 Phil Muldoon <pmuldoon@redhat.com>
5570 Paul Pluzhnikov <ppluzhnikov@google.com>
5571 Vladimir Prus <vladimir@codesourcery.com>
5573 * python/python-value.c (value_object_to_value): New function.
5574 * python/python-internal.h: Include frameobject.h.
5575 (gdbpy_children_cst, gdbpy_to_string_cst, gdbpy_display_hint_cst):
5577 (value_object_to_value): Declare.
5578 * printcmd.c (struct format_data) <raw>: New field.
5579 (last_format): Default to 0.
5580 (decode_format): Initialize val.raw. Handle /r flag.
5581 (print_command_1): Initialize fmt.raw and opts.raw.
5582 (output_command): Likewise.
5583 (x_command): Fix initialization of fmt.format. Initialize
5585 (display_command): Initialize fmt.raw.
5586 (do_one_display): Set opts.raw.
5587 * python/python.c (gdbpy_to_string_cst, gdbpy_children_cst,
5588 gdbpy_display_hint_cst): New globals.
5589 (_initialize_python): Initialize them. Set gdb.pretty_printers.
5590 * cp-valprint.c: Include python.h.
5591 (cp_print_value): Call apply_val_pretty_printer.
5592 * python/python.h (apply_val_pretty_printer): Declare.
5593 * stack.c (print_this_frame_argument_p): Remove.
5594 (print_frame_args): Compute summary flag. Don't use
5595 print_this_frame_argument_p.
5596 * valprint.c: Include python.h.
5597 (user_print_options): Initialize new fields.
5598 (scalar_type_p): New function.
5599 (val_print): Handle 'raw' and 'summary' modes. Call
5600 apply_val_pretty_printer.
5601 (value_print): Handle 'raw' mode.
5602 * valprint.h (struct value_print_options) <raw, summary>: New
5604 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-prettyprint.o
5605 (SUBDIR_PYTHON_SRCS): Add python-prettyprint.c.
5606 (python-prettyprint.o): New target.
5607 * python/python-prettyprint.c: New file.
5609 2009-05-27 Tom Tromey <tromey@redhat.com>
5610 Paul Pluzhnikov <ppluzhnikov@google.com>
5612 * mi/mi-main.c (mi_cmd_data_evaluate_expression): Use
5614 * cli/cli-dump.c (dump_value_to_file): Use value_address.
5615 * valprint.c (common_val_print): Likewise.
5616 * v850-tdep.c (v850_push_dummy_call): Use value_address.
5617 * tracepoint.c (encode_actions): Use value_address.
5618 * printcmd.c (print_formatted): Use value_address.
5619 (x_command): Likewise.
5620 * p-valprint.c (pascal_object_print_static_field): Use
5622 * mn10300-tdep.c (mn10300_push_dummy_call): Use value_address.
5623 * mips-tdep.c (mips_eabi_push_dummy_call): Use value_address.
5624 * m32r-tdep.c (m32r_push_dummy_call): Use value_address.
5625 * jv-valprint.c (java_value_print): Use value_address.
5626 * infcall.c (find_function_addr): Use value_address.
5627 * gnu-v3-abi.c (gnuv3_rtti_type): Use value_address.
5628 * gnu-v2-abi.c (gnuv2_value_rtti_type): Use value_address.
5629 * frv-tdep.c (frv_push_dummy_call): Use value_address.
5630 * frame.c (frame_register_unwind): Use value_address.
5631 (frame_unwind_register_value): Likewise.
5632 * darwin-nat-info.c (info_mach_region_command): Use
5634 * cp-valprint.c (cp_print_static_field): Use value_address.
5635 * c-valprint.c (c_value_print): Use value_address.
5636 * breakpoint.c (update_watchpoint): Use value_address.
5637 (can_use_hardware_watchpoint): Likewise.
5638 * ada-valprint.c (ada_val_print_1): Use value_address.
5639 (ada_value_print): Likewise.
5640 * ada-tasks.c (read_fat_string_value): Use value_address.
5641 * jv-lang.c (java_link_class_type): Use set_value_address.
5642 (java_link_class_type): Likewise.
5643 (get_java_utf8_name): Use value_address.
5644 (type_from_class): Likewise.
5645 (java_link_class_type): Likewise.
5646 * findvar.c (value_of_register): Use set_value_address.
5647 (read_var_value): Likewise.
5648 (read_var_value): Likewise.
5649 * eval.c (evaluate_subexp_standard): Use set_value_address.
5650 (evaluate_subexp_standard): Use value_address.
5651 * dwarf2loc.c (dwarf2_evaluate_loc_desc): Use set_value_address.
5652 * ada-lang.c (coerce_unspec_val_to_type): Use set_value_address.
5653 (ada_value_primitive_packed_val): Likewise.
5654 (ensure_lval): Likewise.
5655 (thin_data_pntr): Use value_address.
5656 (desc_bounds): Likewise.
5657 (ada_value_primitive_packed_val): Likewise.
5658 (value_assign_to_component): Likewise.
5659 (ensure_lval): Likewise.
5660 (make_array_descriptor): Likewise.
5661 (ada_to_fixed_value): Likewise.
5662 (unwrap_value): Likewise.
5663 * value.c (deprecated_value_address_hack): Remove.
5664 (value_address): New function.
5665 (value_raw_address): Likewise.
5666 (set_value_address): Likewise.
5667 (value_fn_field): Use set_value_address.
5668 (value_from_contents_and_address): Likewise.
5669 (value_fn_field): Likewise.
5670 (allocate_value_lazy): Don't use VALUE_ADDRESS.
5671 (value_as_address): Use value_address.
5672 (value_static_field): Likewise.
5673 * valops.c (search_struct_field): Use set_value_address.
5674 (value_at): Likewise.
5675 (value_at_lazy): Likewise.
5676 (value_repeat): Likewise.
5677 (value_cast_structs): Use value_address.
5678 (value_cast): Likewise.
5679 (value_fetch_lazy): Likewise.
5680 (value_assign): Likewise.
5681 (value_repeat): Likewise.
5682 (address_of_variable): Likewise.
5683 (value_coerce_array): Likewise.
5684 (value_coerce_function): Likewise.
5685 (value_addr): Likewise.
5686 (search_struct_field): Likewise.
5687 (search_struct_method): Likewise.
5688 (find_method_list): Likewise.
5689 (value_struct_elt_for_reference): Likewise.
5690 (value_full_object): Likewise.
5691 * jv-valprint.c (java_value_print): Use set_value_address.
5692 * value.h (deprecated_value_address_hack): Remove.
5693 (VALUE_ADDRESS): Remove.
5694 (value_address): Declare.
5695 (value_raw_address): Declare.
5696 (set_value_address): Declare.
5698 2009-05-27 Tom Tromey <tromey@redhat.com>
5699 Thiago Jung Bauermann <bauerman@br.ibm.com>
5700 Phil Muldoon <pmuldoon@redhat.com>
5701 Paul Pluzhnikov <ppluzhnikov@google.com>
5703 * python/python.c (_initialize_python): Call
5704 gdbpy_initialize_types.
5705 (GdbMethods): Add "lookup_type".
5706 * python/python-value.c (value_object) <type>: New field.
5707 (valpy_dealloc): Decref type.
5708 (valpy_new): Initialize type.
5709 (valpy_get_type): New function.
5710 (value_to_value_object): Initialize type.
5711 (valpy_cast): New function.
5712 (value_object_getset): Add "type".
5713 (value_object_methods): Add "cast".
5714 * python/python-internal.h (type_to_type_object): Declare.
5715 (type_object_to_type): Likewise.
5716 (gdbpy_initialize_types): Likewise.
5717 (gdbpy_lookup_type): Declare.
5718 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-type.o.
5719 (SUBDIR_PYTHON_SRCS): Add python-type.c.
5720 (python-type.o): New target.
5721 * python/python-type.c: New file.
5723 2009-05-27 Tom Tromey <tromey@redhat.com>
5724 Thiago Jung Bauermann <bauerman@br.ibm.com>
5725 Phil Muldoon <pmuldoon@redhat.com>
5727 * python/python.c: Include objfiles.h, observer.h.
5728 (gdbpy_auto_load): New global.
5729 (gdbpy_current_objfile): Likewise.
5730 (GDBPY_AUTO_FILENAME): New define.
5731 (gdbpy_new_objfile): New function.
5732 (gdbpy_get_current_objfile): Likewise.
5733 (gdbpy_objfiles): Likewise.
5734 (_initialize_python): Add "maint set auto-load". Call
5735 gdbpy_initialize_objfile. Attach objfile observer.
5736 (GdbMethods): New methods current_objfile, objfiles.
5737 * python/python-objfile.c: New file.
5738 * python/python-internal.h (objfile_to_objfile_object): Declare.
5739 (objfpy_get_printers): Likewise.
5740 (gdbpy_initialize_objfile): Likewise.
5741 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-objfile.o.
5742 (SUBDIR_PYTHON_SRCS): Add python-objfile.c.
5743 (python-objfile.o): New target.
5745 2009-05-27 Pedro Alves <pedro@codesourcery.com>
5747 * infrun.c (follow_exec): Clear the stop_requested flag.
5748 * linux-nat.c (linux_handle_extended_wait) <PTRACE_EVENT_EXEC>:
5751 2009-05-27 Aleksandar Ristovski <aristovski@qnx.com>
5753 * nto-procfs.c (get_regset): Pass correct pointer.
5755 2009-05-26 Doug Evans <dje@google.com>
5757 * dwarf2read.c (follow_die_ref): Add comment.
5758 (dwarf2_mark_helper): Tweak comment.
5759 (dwarf2_mark): Move description to its proper place.
5761 2009-05-25 Pierre Muller <muller@ics.u-strasbg.fr>
5763 * procfs.c (procfs_wait): Add options parameter.
5765 2009-05-24 Doug Evans <dje@google.com>
5767 Global renaming of find_thread_pid to find_thread_ptid.
5768 * gdbthread.h (find_thread_ptid): Renamed from find_thread_pid.
5769 * thread.c (find_thread_ptid): Renamed from find_thread_pid.
5770 All callers updated.
5772 * infrun.c (follow_fork): Initialize new step_* locals
5773 to avoid "may be used uninitialized" warnings.
5775 2009-05-24 Pedro Alves <pedro@codesourcery.com>
5777 * inflow.c (copy_terminal_info): Deep copy `run_terminal'.
5779 2009-05-24 Pedro Alves <pedro@codesourcery.com>
5781 * gdbthread.h (struct thread_info): New `pending_follow' field.
5782 * thread.c (new_thread): New function.
5783 (add_thread_silent): Use it.
5784 * breakpoint.c (internal_breakpoint_number): New global, moved
5786 (create_internal_breakpoint): ... this.
5787 (clone_momentary_breakpoint): New.
5788 * breakpoint.h (clone_momentary_breakpoint): Declare.
5789 * infrun.c (nullify_last_target_wait_ptid): Move declaration
5791 (pending_follow): Delete.
5792 (follow_fork): Handle pending follow fork event here. Moved the
5793 preserving of thread stepping state here.
5794 (resume): Don't handle pending follow fork events here. Only
5795 install the inferior's terminal modes if we're about to resume it.
5796 (proceed): Handle possible pending follow fork events here.
5797 (init_wait_for_inferior): No need to clear pending_follow anymore,
5799 (handle_inferior_event): Adjust to per-thread `pending_follow'.
5800 Call `follow_fork' to handle following the fork. If the
5801 follow-fork is cancelled, stop stepping.
5802 * linux-nat.c (linux_child_follow_fork): Adjust to per-thread
5803 `pending_follow' events. Remove code that handled preserving the
5804 thread stepping state.
5805 * inf-ptrace.c (inf_ptrace_follow_fork): Ditto.
5806 * inf-ttrace.c (inf_ttrace_follow_fork): Ditto.
5808 2009-05-24 Pierre Muller <muller@ics.u-strasbg.fr>
5810 * symfile.c (add_shared_symbol_files_command): Remove
5811 prototype and function.
5812 (_initialize _symfile): Move "add-shared-symbol-files"
5813 command and "assf" alias.
5814 * windows-nat.c (_initialize_windows_nat): to here.
5815 Change "add-shared-symbol-files" to alias.
5817 * config/i386/cygwin.mh: Remove NAT_FILE.
5818 * config/i386/mingw.mh: Remove NAT_FILE.
5819 * config/i386/mingw64.mh: Remove NAT_FILE.
5820 * config/i386/nm-cygwin.h: Remove file.
5821 * config/i386/nm-cygwin64.h: Remove file.
5823 2009-05-24 Hui Zhu <teawater@gmail.com>
5825 * i386-linux-tdep.c (I386_LINUX_RECORD_SIZE_*,
5826 I386_LINUX_RECORD_IOCTL_*,
5827 I386_LINUX_RECORD_FCNTL_*) Removed.
5828 (i386_linux_init_abi): Change size of record from macros to
5831 2009-05-24 Hui Zhu <teawater@gmail.com>
5833 * i386-linux-tdep.c (i386_linux_init_abi): Remove size_char.
5834 * linux-record.c (record_linux_system_call): Ditto.
5835 * linux-record.h (linux_record_tdep): Ditto.
5837 2009-05-23 Jan Kratochvil <jan.kratochvil@redhat.com>
5839 Replace the savestring calls by xstrdup calls where possible.
5840 * breakpoint.c (condition_command, set_raw_breakpoint)
5841 (create_catchpoint, update_breakpoint_locations): Replace the
5842 savestring calls by xstrdup calls where possible.
5843 * buildsym.c (start_subfile, patch_subfile_names, record_debugformat)
5844 (record_producer): Likewise.
5845 * coffread.c (coff_start_symtab, complete_symtab): Likewise.
5846 * corefile.c (set_gnutarget): Likewise.
5847 * dbxread.c (add_new_header_file): Likewise.
5848 * demangle.c (set_demangling_command, set_demangling_style): Likewise.
5849 * event-top.c (push_prompt, pop_prompt, command_line_handler)
5850 (set_async_prompt): Likewise.
5851 * infcmd.c (set_inferior_io_terminal, attach_command_post_wait):
5853 * language.c (set_language_command, _initialize_language): Likewise.
5854 * linespec.c (decode_line_2): Likewise.
5855 * rs6000-nat.c (add_vmap): Likewise.
5856 * top.c (set_prompt, init_history, init_main): Likewise.
5857 * tracepoint.c (stringify_collection_list): Likewise.
5858 * varobj.c (varobj_create): Remove variable expr_len. Replace the
5859 savestring calls by xstrdup calls where possible.
5860 (value_of_root, c_name_of_variable, c_describe_child): Replace the
5861 savestring calls by xstrdup calls where possible.
5862 * xcoffread.c (complete_symtab): Likewise.
5863 * cli/cli-script.c (build_command_line, define_command): Likewise.
5864 * cli/cli-setshow.c (do_setshow_command): Likewise.
5866 2009-05-23 Jan Kratochvil <jan.kratochvil@redhat.com>
5868 Remove already unreachable code.
5869 * varobj.c (varobj_get_handle): Fix comment when error is called.
5870 All callers updated.
5872 2009-05-23 Eli Zaretskii <eliz@gnu.org>
5874 * README (`configure' options): Document GDB-specific options to
5877 * symtab.c (skip_prologue_using_lineinfo): New function.
5878 (find_function_start_sal): Use it to get to the first line of
5879 function's body that has an entry in the lineinfo table.
5881 * symmisc.c (dump_symtab): Switch the current language to
5882 the language of the symtab we are dumping only if the symtab's
5883 language is neither language_auto nor language_unknown.
5885 * coffread.c (coff_symtab_read): Set language_minimal as the
5886 language for the "_globals_" pseudo-file.
5887 (process_coff_symbol): Set the symbol's language to the language
5890 2009-05-22 Pedro Alves <pedro@codesourcery.com>
5892 * target.h (struct section_table): Rename to ...
5893 (struct target_section): ... this.
5894 * exec.c: Adjust all references.
5895 * exec.h: Adjust all references.
5896 * nto-tdep.c: Adjust all references.
5897 * nto-tdep.h: Adjust all references.
5898 * ppc-linux-tdep.c: Adjust all references.
5899 * rs6000-nat.c: Adjust all references.
5900 * s390-tdep.c: Adjust all references.
5901 * solib-darwin.c: Adjust all references.
5902 * solib-frv.c: Adjust all references.
5903 * solib-irix.c: Adjust all references.
5904 * solib-null.c: Adjust all references.
5905 * solib-osf.c: Adjust all references.
5906 * solib-pa64.c: Adjust all references.
5907 * solib-som.c: Adjust all references.
5908 * solib-sunos.c: Adjust all references.
5909 * solib-svr4.c: Adjust all references.
5910 * solib-target.c: Adjust all references.
5911 * solib.c: Adjust all references.
5912 * solist.h: Adjust all references.
5913 * symfile.c: Adjust all references.
5914 * symfile.h: Adjust all references.
5915 * target.c: Adjust all references.
5917 2009-05-22 Hui Zhu <teawater@gmail.com>
5919 Add sys_fcntl argument interfaces to linux_record_tdep.
5921 * linux-record.h (linux_record_tdep): Add fcntl_F_GETLK,
5922 fcntl_F_GETLK64, fcntl_F_SETLK64 and fcntl_F_SETLKW64 to be
5924 * i386-linux-tdep.c (I386_LINUX_RECORD_FCNTL_F_GETLK,
5925 I386_LINUX_RECORD_FCNTL_F_GETLK64,
5926 I386_LINUX_RECORD_FCNTL_F_SETLK64,
5927 I386_LINUX_RECORD_FCNTL_F_SETLKW64): New macros. The values
5928 of I386 Linux sys_fcntl arguments.
5929 (i386_linux_init_abi): Set macros values to linux_record_tdep.
5930 * linux-record.c (record_linux_system_call): Change to use
5931 the interface in linux_record_tdep in sys_fcntl and
5934 * linux-record.c (record_linux_system_call): Fix the process
5935 record build error about type in CYGWIN.
5937 2009-05-22 Pedro Alves <pedro@codesourcery.com>
5939 * inflow.c (kill_command): Delete left over static declaration.
5941 2009-05-22 Pedro Alves <pedro@codesourcery.com>
5943 * bfd-target.c: Don't include gdb_assert.h or gdb_string.h.
5945 (struct section_closure): Delete.
5946 (add_to_section_table): Delete.
5947 (build_target_sections_from_bfd): Delete.
5948 (target_bfd_xfer_partial): Use section_table_xfer_memory_partial.
5949 (target_bfd_reopen): Use build_section_table.
5950 * exec.c (xfer_memory): Move most code except for overlay
5951 debugging support from here...
5952 (section_table_xfer_memory): ... to this new function.
5953 (section_table_xfer_memory_partial): New.
5954 * exec.h (section_table_xfer_memory_partial): Declare.
5955 * bfd-target.h (build_target_sections_from_bfd): Delete
5958 2009-05-22 Pedro Alves <pedro@codesourcery.com>
5960 * remote.c (compare_sections_command): Don't declare exec_bfd.
5961 * tracepoint.c: Include "gdbcore.h".
5962 (remote_set_transparent_ranges): Don't declare exec_bfd.
5964 2009-05-21 Pedro Alves <pedro@codesourcery.com>
5966 * aix-thread.c (init_aix_thread_ops): Whitespace.
5968 2009-05-21 Pedro Alves <pedro@codesourcery.com>
5970 * dec-thread.c (dec_thread_wait): Add options parameter. Use it
5971 to call the to_wait method in the target beneath.
5972 * remote-m32r-sdi.c (m32r_wait): Add options parameter.
5974 2009-05-21 Joel Brobecker <brobecker@adacore.com>
5976 * aix-thread.c (aix_thread_wait): Add options parameter. Use it
5977 to call the to_wait method in the target_beneath.
5979 2009-05-21 Pedro Alves <pedro@codesourcery.com>
5981 * linux-nat.c (linux_nat_terminal_inferior)
5982 (linux_nat_terminal_ours): Don't check sync_execution.
5983 * remote.c (remote_terminal_inferior, remote_terminal_ours):
5984 Don't check sync_execution. Update comments.
5985 * target.c (target_terminal_inferior): New.
5986 * target.h (target_terminal_inferior): Delete macro, and declare
5988 * event-top.c (async_disable_stdin): Make idempotent. Don't give
5989 the target the terminal here.
5990 * inflow.c (terminal_ours_1): Don't return early without setting
5993 2009-05-21 Pedro Alves <pedro@codesourcery.com>
5995 * target.h (TARGET_WNOHANG): New.
5996 * target.c (target_wait): Add `options' argument. Adjust.
5997 (struct target_ops) <to_wait>: Add `options' argument.
5998 (target_wait): Add `options' argument.
5999 * infrun.c (wait_for_inferior): Pass 0 as options to
6000 target_wait (blocking wait).
6001 (fetch_inferior_event): Pass TARGET_WNOHANG as options to
6003 * fork-child.c (startup_inferior): Pass 0 as options to
6004 target_wait (blocking wait).
6005 * linux-nat.c (linux_nat_create_inferior): Remove async masking.
6006 (linux_nat_wait_1): Add `target_options' argument. Use it instead
6007 of checking on target_can_async_p.
6008 (linux_nat_wait): Add `target_options' argument. Adjust.
6009 * remote.c (remote_wait_ns): Add `options' argument. Adjust to
6010 check on TARGET_WNOWAIT instead of checking on remote_is_async_p.
6011 (remote_wait_as): Add `options' argument. Adjust to check on
6012 TARGET_WNOWAIT instead of checking on remote_is_async_p. If doing
6013 a blocking wait, keep waiting until an interesting event comes
6015 (remote_wait): Add `options' argument. Don't loop here if the
6016 target is in async mode, and a blocking wait has been requested.
6018 * top.c (deprecated_target_wait_hook): Add `options' argument.
6019 * linux-thread-db.c (thread_db_wait): Add `options' argument, and
6020 pass it down to the layer beneath.
6021 * inf-ptrace.c (inf_ptrace_wait): Add `options' argument.
6022 * record.c (record_beneath_to_wait): Add `options' argument.
6023 (record_wait): Add `options' argument, and pass it down to the
6025 * bsd-uthread.c (bsd_uthread_wait): Add `options' argument.
6026 * darwin-nat.c (darwin_wait): Likewise.
6027 * defs.h (deprecated_target_wait_hook): Likewise.
6028 * gnu-nat.c (gnu_wait): Add `options' argument.
6029 * go32-nat.c (go32_wait): Likewise.
6030 * hpux-thread.c (hpux_thread_wait): Add `options' argument, and
6031 pass it down to the layer beneath.
6032 * inf-ttrace.c (inf_ttrace_wait): Add `options' argument.
6033 * monitor.c (monitor_wait): Likewise.
6034 * nto-procfs.c (procfs_wait): Likewise.
6035 * remote-mips.c (mips_wait): Add `options' argument.
6036 * remote-sim.c (gdbsim_wait): Likewise.
6037 * rs6000-nat.c (rs6000_wait): Add `options' argument.
6038 * sol-thread.c (sol_thread_wait): Add `options' argument, and pass
6039 it down to the layer beneath.
6040 * spu-linux-nat.c (spu_child_wait): Add `options' argument.
6041 * windows-nat.c (windows_wait): Likewise.
6042 * tui/tui-hooks.c (tui_target_wait_hook): Likewise. Adjust.
6044 2009-05-21 Pedro Alves <pedro@codesourcery.com>
6046 * mi/mi-interp.c (mi_on_resume): Account for whole process
6049 2009-05-21 Jan Kratochvil <jan.kratochvil@redhat.com>
6051 * m2-exp.y (MAX_FUNC): Fix trailing UNOP_MAX.
6053 2009-05-21 Jan Kratochvil <jan.kratochvil@redhat.com>
6055 * dwarf2read.c (set_cu_language): Recognize also DW_LANG_C99.
6057 2009-05-21 Jan Kratochvil <jan.kratochvil@redhat.com>
6059 Fix parsing DW_AT_const_value using DW_FORM_string.
6060 * dwarf2read.c (dwarf2_const_value <DW_FORM_string>): New.
6062 2009-05-20 Joel Brobecker <brobecker@adacore.com>
6064 * aix-thread.c (giter_count): Do not count the main thread.
6065 (giter_accum): Do not include the main thread.
6067 2009-05-19 Jan Kratochvil <jan.kratochvil@redhat.com>
6069 Remove the PROT parameter from openp.
6070 * source.c (openp): Remove the parameter PROT. Assertion check MODE.
6071 defs.h (openp): Update the prototype.
6072 Update all the openp callers.
6074 2009-05-19 Pedro Alves <pedro@codesourcery.com>
6076 * inflow.c (kill_command): Moved to infcmd.c.
6077 (_initialize_inflow): Don't add the "kill" command or clear
6079 * infcmd.c (kill_command): Moved here from inflow.c.
6080 (_initialize_infcmd): Add the "kill" command here.
6082 2009-05-19 Pedro Alves <pedro@codesourcery.com>
6084 * fork-child.c: Don't include frame.h. Include terminal.h.
6085 (fork_inferior): Call new_tty_postfork after forking adn adding
6086 the child to the inferior list.
6087 * inferior.h (new_tty_prefork, gdb_has_a_terminal): Don't declare
6089 * inflow.c (struct terminal_info): Remove const qualifier from
6090 `run_terminal' field.
6091 (inferior_thisrun_terminal): Tweak comment.
6092 (inflow_inferior_exit): Release the `run_terminal' field.
6093 (copy_terminal_info): New function.
6094 (new_tty_postfork): New function.
6095 * terminal.h (new_tty_prefork, new_tty, new_tty_postfork,
6096 (copy_terminal_info, gdb_has_a_terminal, gdb_setpgid): Declare.
6097 * inf-ptrace.c: Include terminal.h.
6098 (inf_ptrace_follow_fork): Copy the parent's terminal info to the
6100 * linux-nat.c: Include terminal.h.
6101 (linux_child_follow_fork): Copy the parent's terminal info to the
6103 * inf-ttrace.c: Include terminal.h.
6104 (inf_ttrace_follow_fork): Copy the parent's terminal info to the
6107 2009-05-19 Pedro Alves <pedro@codesourcery.com>
6109 * breakpoint.c (insert_breakpoints, breakpoint_init_inferior)
6110 (update_global_location_list): Use gdbarch_has_global_breakpoints
6111 instead of gdbarch_has_global_solist and
6112 target_supports_multi_process.
6113 * dicos-tdep.c (dicos_init_abi): Set
6114 gdbarch_has_global_breakpoints.
6115 * gdbarch.sh (has_global_solist): Update comment.
6116 (has_global_breakpoints): New.
6117 * remote.c (remote_start_remote): Use
6118 gdbarch_has_global_breakpoints instead of
6119 gdbarch_has_global_solist.
6120 * target.c (target_detach): Use gdbarch_has_global_breakpoints
6121 instead of gdbarch_has_global_solist.
6122 * infcmd.c (attach_command): Use gdbarch_has_global_solist instead
6123 of target_supports_multi_process.
6125 2009-05-18 Paul Pluzhnikov <ppluzhnikov@google.com>
6127 * objc-lang.c (find_methods): Plug a small memory leak.
6129 2009-05-18 Pedro Alves <pedro@codesourcery.com>
6131 * solib-svr4.c: Include observer.h.
6132 (debug_base, debug_loader_offset_p, debug_loader_offset)
6133 (debug_loader_name, main_lm_addr): Move these globals...
6134 (struct svr4_info): ... into this new structure.
6135 (svr4_info_p): New typedef.
6136 (svr4_info): New global.
6137 (get_svr4_info, remove_svr4_info, solib_svr4_inferior_exit): New
6139 (locate_base, solib_svr4_r_map, solib_svr4_r_brk)
6140 (solib_svr4_r_ldsomap): Add svr4_info argument. Adjust to
6142 (open_symbol_file_object): Adjust to per-inferior svr4.
6143 (svr4_default_sos, svr4_current_sos, svr4_fetch_objfile_link_map):
6145 (enable_break): Add svr4_info argument. Adjust to per-inferior
6147 (enable_break, svr4_solib_create_inferior_hook, svr4_clear_solib):
6148 Adjust to per-inferior svr4.
6149 (_initialize_svr4_solib): Install the solib_svr4_inferior_exit
6152 2009-05-18 Pedro Alves <pedro@codesourcery.com>
6154 * linux-nat.h (linux_proc_get_tgid): Declare.
6155 * linux-nat.c (linux_proc_get_tgid): New.
6156 * linux-thread-db.c (struct thread_db_info): New field
6157 `need_stale_parent_threads_check'.
6158 (add_thread_db_info): Set it.
6159 (find_new_threads_callback): Ignore stale fork parent threads.
6160 (thread_db_resume): New.
6161 (init_thread_db_ops): Install thread_db_resume.
6163 2009-05-18 Pedro Alves <pedro@codesourcery.com>
6165 * fork-child.c (fork_inferior): Only reset the thread list if this
6166 is the first inferior.
6167 (startup_inferior): If the target support multi-process, tell it
6168 to resume only the new process.
6169 * linux-nat.c (num_lwps): Delete global.
6170 (purge_lwp_list): New function.
6171 (num_lwps): New function.
6172 (add_lwp, delete_lwp): Adjust.
6174 (iterate_over_lwps): Add filter argument. Handle it.
6175 (linux_nat_attach): Remove FIXME note.
6176 (linux_nat_detach): Adjust to iterate over threads of the inferior
6177 we're detaching from. Adjust to num_lwps being a function. Don't
6178 assume the head of the lwp list is the main thread of the process
6179 we're detaching from. Don't destroy the LWP list.
6180 (resume_callback): Add debug output.
6181 (linux_nat_resume): Handle resuming a single inferior. Allow a
6182 wildcard resume in non-stop mode.
6183 (linux_handle_extended_wait): Don't assume inferior_ptid is the
6184 correct inferior of the parent LWP.
6185 (status_callback): Also check lp->waitstatus.
6186 (select_event_lwp): Add new filter parameter. Handle it.
6187 (linux_nat_filter_event): Adjust to num_lwps being a function.
6188 (linux_nat_wait_1): When adding the first lwp of the inferior, use
6189 an is_lwp check instead of checking for the number of lwps.
6190 (linux_nat_wait_1): Handle waiting for a specific tgid. Handle
6191 pending process exit statuses.
6192 (linux_nat_mourn_inferior): Don't destroy all the LWP info.
6193 Instead delete LWPs of the inferior that we're mourning. Don't
6194 unregister from the event loop here.
6195 (linux_nat_pid_to_str): Use `num_lwps'.
6196 (linux_nat_make_corefile_notes): Adjust to walk over lwps of a
6198 (linux_nat_is_async_p): Check if async was masked out.
6199 (linux_multi_process): New global.
6200 (linux_nat_supports_multi_process): New.
6201 (linux_nat_stop_lwp): Remove LWP filtering. It is done by the
6203 (linux_nat_stop): Adjust to make iterate_over_lwps itself do the
6205 (linux_nat_close): New.
6206 (linux_nat_add_target): Register linux_nat_close and
6207 linux_nat_supports_multi_process.
6208 * linux-nat.h (iterate_over_lwps): Add filter argument.
6209 * linux-thread-db.c (thread_db_handle): Delete.
6210 (proc_handle, thread_agent, td_init_p, td_ta_new_p)
6211 (td_ta_map_id2thr_p, td_ta_map_lwp2thr_p, td_ta_thr_iter_p)
6212 (td_ta_event_addr_p, td_ta_set_event_p, td_ta_event_getmsg_p)
6213 (td_thr_validate_p, td_thr_get_info_p, td_thr_event_enable_p)
6214 (td_thr_tls_get_addr_p, td_create_bp_addr, td_death_bp_addr): No
6215 longer globals, moved to...
6216 (struct thread_db_info): ... this new structure.
6217 (thread_db_list): New.
6218 (add_thread_db_info, get_thread_db_info, delete_thread_db_info):
6220 (have_threads_callback): Filter out threads of all inferiors but
6221 the one specified by the ARGS argument.
6222 (have_threads): Add ptid argument specifying the inferior we're
6223 interested in. Handle it.
6224 (struct thread_get_info_inout): New.
6225 (thread_get_info_callback, thread_from_lwp): Adjust to use it.
6226 (thread_db_attach_lwp): Check that inferior of the passed in
6227 thread is using thread-db. Adjust.
6228 (enable_thread_event): Remove thread_agent parameter. Instead,
6229 get it from the per-inferior thread-db info.
6230 (dladdr_to_soname): Move higher up.
6231 (enable_thread_event_reporting): Adjust to use per-inferior
6233 (try_thread_db_load_1): Replace `handle' parameter by a
6234 thread_db_info parameter. Adjust to use per-inferior thread-db
6236 (try_thread_db_load): Adjust to use per-inferior thread-db info.
6237 (thread_db_load, disable_thread_event_reporting): Ditto.
6238 (check_for_thread_db): Remove conditional reporting of which
6239 libthread_db is in use.
6240 (thread_db_new_objfile): Add comment about inferior_ptid.
6241 (attach_thread): Adjust to use per-inferior thread-db info.
6242 (thread_db_detach): Adjust to use per-inferior thread-db info.
6243 Remove thread event breakpoints of the current inferior. Only
6244 unpush the thread-db target if there are no more processes using
6246 (check_event): Adjust to use per-inferior thread-db info.
6247 (thread_db_wait): Adjust to use per-inferior thread-db info. Only
6248 unpush the thread-db target if there are no more processes using
6250 (thread_db_mourn_inferior): Adjust to use per-inferior thread-db
6251 info. Mark breakpoints of the current inferior out before
6252 deleting them. Only unpush the thread-db target if there are no
6253 more processes using it.
6254 (find_new_threads_callback): Adjust to use per-inferior thread_db
6256 (thread_db_find_new_threads_1): Add new ptid argument. Adjust to
6257 use per-inferior thread-db info.
6258 (thread_db_find_new_threads): Adjust to use per-inferior thread-db
6260 (thread_db_get_thread_local_address): Adjust.
6261 (thread_db_get_ada_task_ptid): Adjust.
6262 * inf-ptrace.c (inf_ptrace_mourn_inferior): Only unpush the target
6263 if there no more processes left to debug.
6264 * thread.c (set_running, set_executing): Handle resuming all
6265 threads of a single inferior.
6266 * mi/mi-interp.c (mi_output_running_pid): New.
6267 (mi_inferior_count): New.
6268 (mi_on_resume): For backwards compatibility, if resuming all
6269 threads of an inferior, and there is only one inferior, output
6272 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
6274 * ada-lang.c (ada_find_any_type): Move check for primitive types ...
6275 (to_fixed_range_type): ... to here.
6277 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
6279 * ada-lang.c (desc_data_type): Remove, replace by ...
6280 (desc_data_target_type): ... this.
6281 (thin_data_pntr): Use desc_data_target_type instead of desc_data_type.
6282 (ada_is_array_descriptor_type): Likewise.
6283 (ada_type_of_array): Likewise.
6284 (ada_coerce_to_simple_array_type): Likewise.
6285 (ada_array_element_type): Likewise.
6287 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
6289 * ada-valprint.c (ada_val_print_1): Use val_print_string to print
6290 result of ada_vax_float_print_function inferior call.
6292 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
6294 * ada-lang.c (ada_coerce_to_simple_array_type): Reimplement to
6295 avoid creating a dummy value.
6297 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
6299 * p-valprint.c (pascal_val_print): Use extract_typed_address
6300 to extract reference value.
6302 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
6304 * doublest.c (NAN): Remove unused define.
6305 (extract_floating_by_length, deprecated_extract_floating): Remove.
6306 (store_floating_by_length, deprecated_store_floating): Remove.
6307 (extract_typed_floating): Do not call extract_floating_by_length.
6308 (store_typed_floating): Do not call store_floating_by_length.
6309 (convert_typed_floating): Remove redundant assertions.
6310 * doublest.h (deprecated_extract_floating): Remove.
6311 (deprecated_store_floating): Remove.
6312 * sh64-tdep.c (sh64_register_convert_to_raw): Call
6313 extract_typed_floating instead of deprecated_extract_floating.
6315 2009-05-18 Jon Beniston <jon@beniston.com>
6317 * MAINTAINERS: Add lm32 target.
6318 * Makefile.in: Add lm32 dependencies.
6319 * NEWS: Indicate lm32 is a new target.
6320 * configure.tgt: Add lm32 targets.
6321 * lm32-tdep.c: New file.
6323 2009-05-18 Pedro Alves <pedro@codesourcery.com>
6325 * corelow.c (core_open): Flush the register cache before doing
6326 anything with registers.
6328 2009-05-18 Pedro Alves <pedro@codesourcery.com>
6330 * inflow.h (our_process_group): Remove declaration.
6331 (inferior_process_group): Delete global variable declaration.
6332 (inferior_process_group): New function declaration.
6333 * inflow.c: Include observer.h.
6334 (inferior_ttystate, our_ttystate, tflags_inferior, tflags_ours):
6336 (struct terminal_info): New struct.
6337 (our_terminal_info): New global.
6338 (inferior_process_group): New function.
6339 (inferior_thisrun_terminal): Extend description comment.
6340 (gdb_has_a_terminal): Adjust to write to our_terminal_info fields
6342 (terminal_init_inferior_with_pgrp): Adjust to per-inferior
6344 (terminal_inferior): Ditto.
6345 (terminal_ours_1): Ditto.
6346 (inflow_new_inferior, inflow_inferior_exit): New functions.
6347 (child_terminal_info): Adjust to per-inferior terminal settings.
6348 (osig_set): New global.
6349 (set_sigint_trap): Adjust to per-inferior terminal settings. Set
6350 or clear `osig_set' accordingly.
6351 (clear_sigint_trap): Check `osig_set' to decide wheater to restore
6352 SIGINT handler, instead of checking the current inferior (which
6354 (_initialize_inflow): Attach inflow_new_inferior and
6355 inflow_inferior_exit to the "new_inferior" and "inferior_exit"
6356 notifications, respectively.
6357 * inferior.h (struct terminal_info): Forward declare.
6358 (struct inferior): Add `terminal_info' field.
6359 * inferior.c (delete_inferior_1): Notify the inferior_exit
6360 observers before removing the inferior from the lists and deleting
6362 * inf-ptrace.c (inf_ptrace_stop): `inferior_process_group' is now
6363 a function instead of a variable. Adjust.
6364 * procfs.c (procfs_stop): Ditto.
6366 2009-05-17 Pedro Alves <pedro@codesourcery.com>
6368 * infrun.c (handle_inferior_event): When handling a
6369 TARGET_WAITKIND_FORKED, detach breakpoints from the fork child
6371 * linux-nat.c (linux_child_follow_fork): Only detach breakpoints
6372 from the child if vforking.
6373 * inf-ptrace.c (inf_ptrace_follow_fork): No need to detach
6374 breakpoints from the child here.
6376 2009-05-17 Pedro Alves <pedro@codesourcery.com>
6378 * infrun.c (pending_follow): Remove execd_pathname member.
6379 (resume): No longer handle TARGET_WAITKIND_EXECD pending follow.
6380 (handle_inferior_event): When handling a TARGET_WAITKIND_EXECD
6381 event, don't copy `execd_pathname' to pending_follow, use the
6382 event copy instead. Release `execd_pathname' once done with
6385 * infrun.c (pending_follow): Remove mention of exec events.
6387 2009-05-17 Hui Zhu <teawater@gmail.com>
6389 * i386-tdep.c (i386_process_record): Make it extern.
6390 (i386_gdbarch_init): Don't call set_gdbarch_process_record
6392 * i386-tdep.h (i386_process_record): Declare.
6393 * i386-linux-tdep.c (i386_linux_init_abi): Call
6394 set_gdbarch_process_record.
6396 2009-05-17 Vladimir Prus <vladimir@codesourcery.com>
6398 Always report varobj as changed when in_scope attribute changes.
6400 * varobj.c (install_new_value): If non-NULL-ness of value
6403 2009-05-15 Paul Pluzhnikov <ppluzhnikov@google.com>
6405 * NEWS: Mention set/show libthread-db-search-path.
6406 * gdb_thread_db.h (LIBTHREAD_DB_SEARCH_PATH): New define.
6407 (LIBTHREAD_DB_SO): Moved from linux-thread-db.c
6408 * linux-thread-db.c (libthread_db_search_path): New setting.
6409 (thread_db_handle): New variable (replaces using_thread_db).
6410 (try_thread_db_load_1): New function.
6411 (try_thread_db_load, thread_db_load_search): Likewise.
6412 (dladdr_to_soname): Likewise.
6413 (thread_db_load): Iterate over possibly multiple libthread_db's.
6414 (check_for_thread_db): Attempt to load new libthread_db.
6415 (thread_db_detach, thread_db_wait): Unload libthread_db.
6416 (thread_db_mourn_inferior): Likewise.
6417 (_initialize_thread_db): Add new libthread-db-search-path option.
6418 Defer loading of libthread_db to check_for_thread_db.
6419 * solib.c (libpthread_name_p): New function.
6420 (libpthread_solib_p): Call it.
6421 * solib.h (libpthread_name_p): New prototype.
6423 2009-05-15 Pierre Muller <muller@ics.u-strasbg.fr>
6425 * MAINTAINERS: Update my email address.
6427 2009-05-14 Paul Pluzhnikov <ppluzhnikov@google.com>
6429 * breakpoint.h: Add breakpoint_re_set_objfile prototype.
6430 * breakpoint.c (create_overlay_event_breakpoint): Renamed
6431 from create_overlay_event_breakpoint_1, old
6432 create_overlay_event_breakpoint deleted.
6433 (breakpoint_re_set_objfile): Don't rescan all objfiles
6435 (breakpoint_re_set): New function.
6436 * symfile.c (new_symfile_objfile): Call breakpoint_re_set_objfile
6437 instead of breakpoint_re_set.
6438 * objfiles.c (objfile_relocate): Likewise.
6440 2009-05-14 Joel Brobecker <brobecker@adacore.com>
6442 * gdbarch.sh: Add comment documenting the target_gdbarch global.
6443 gdbarch.h does NOT need to be regenerated as the corresponding
6444 change has already been made in a previous commit.
6446 2009-05-14 Pierre Muller <muller@ics.u-strasbg.fr>
6448 Remove all i386 debug register low level macros in config nm files.
6449 (I386_DR_LOW_SET_ADDR, I386_DR_LOW_RESET_ADDR): Remove.
6450 (I386_DR_LOW_GET_STATUS, I386_DR_LOW_SET_CONTROL): Remove.
6451 (I386_USE_GENERIC_WATCHPOIINTS): Remove.
6453 * i386-nat.h: New file (adapted from config/i386/nm-i386.h).
6454 (struct i386_dr_low_type): New type.
6455 (i386_dr_low): New global variable.
6456 * i386-nat.c (TARGET_HAS_DR_LEN_8): Update macro.
6457 (i386_insert_aligned_watchpoint): Replace i386 dr low macros by
6458 i386_dr_low struct variable fields.
6459 (i386_remove_aligned_watchpoint): Likewise.
6460 (i386_stopped_data_address): Likewise.
6461 (i386_stopped_by_hwbp): Likewise.
6462 (show_debug_regs_command_added): New static variable.
6463 (add_show_debug_regs_command): New static function.
6464 (i386_use_watchpoints): Call add_show_debug_regs_command if not done.
6465 (i386_set_debug_register_length): New function.
6466 (_initialize_i386_nat): Delete.
6468 * amd64-linux-nat.c: Include "i386-nat.h".
6469 (amd64_linux_dr_set_control): Change to static.
6470 (amd64_linux_dr_get_status): Change to static.
6471 (amd64_linux_dr_set_addr,amd64_linux_dr_reset_addr): Likewise.
6472 (_initialize_amd64_linux_nat): Set i386_dr_low variable fields.
6474 * go32-nat.c: Include "i386-nat.h".
6475 (go32_set_addr): Change to static.
6476 (go32_set_dr7): Change to static. Change arg type to unisgned long.
6477 (go32_get_dr6): Change to static. Change return type to unisnged long.
6478 (init_go32_ops): Set i386_dr_low variable fields.
6479 * i386-linux-nat.c: Include "i386-nat.h".
6480 (i386_linux_dr_set_control, i386_linux_dr_get_status): Change to static.
6481 (i386_linux_dr_set_addr, i386_linux_dr_reset_addr): Idem.
6482 (_initialize_i386_linux_nat): Set i386_dr_low variable fields.
6483 * i386bsd-nat.h: Declare functions used for
6484 i386_dr_low fields in i386fbsd-nat.c.
6485 * i386fbsd-nat.c: Include "i386-nat.h".
6486 (_initialize_i386fbsd_nat): Set i386_dr_low variable fields.
6487 * windows-nat.c: Include "i386-nat.h".
6488 (cygwin_set_dr, cygwin_get_dr6, cygwin_set_dr7): Add prototypes.
6490 (cygwin_get_dr6): Change return type to unisnged long.
6491 (cygwin_set_dr7): Change arg type to unisgned long.
6492 (init_windows_ops): Set i386_dr_low function fields.
6494 * amd64-windows-nat.c (_initialize_amd64_windows_nat): Call
6495 i386_set_debug_register_length.
6496 * i386-windows-nat.c (_initialize_i386_windows_nat): Likewise.
6498 * config/i386/nm-cygwin.h: Remove all I386_* macros.
6499 * config/i386/nm-cygwin64.h: Likewise.
6500 * config/i386/nm-fbsd.h: Likewise.
6501 * config/i386/nm-linux.h: Likewise.
6502 * config/i386/nm-i386.h: Remove completely.
6503 * config/i386/nm-go32.h: Remove completely.
6504 * config/i386/nm-linux64.h: Remove completely.
6505 * config/i386/go32.mh (NAT_FILE): Remove entry.
6506 * config/i386/linux64.h (NAT_FILE): Change to config/nm-linux.h.
6508 2009-05-14 Jon Beniston <jon@beniston.com>
6510 * MAINTAINERS: Add Jon Beniston to write after approval list.
6512 2009-05-13 Paul Pluzhnikov <ppluzhnikov@google.com>
6514 * objc-lang.c (objc_objfile_data): New variable.
6515 (find_methods): Skip objfiles without Obj-C methods.
6516 (_initialize_objc_lang): New function.
6518 2009-05-13 Joel Brobecker <brobecker@adacore.com>
6520 * c-lang.c (print_wchar): Remove unnecessary cast.
6522 2009-05-12 Jim Blandy <jimb@red-bean.com>
6524 * MAINTAINERS: Remove self as m32c target maintainer.
6526 2009-05-12 Pedro Alves <pedro@codesourcery.com>
6528 * cli/cli-decode.c (deprecated_add_set_cmd): Delete.
6529 * command.h (deprecated_add_set_cmd): Delete declaration.
6530 * gnu-nat.c (_initialize_gnu_nat): Replace 'maint gnu-debug' with
6531 'set debug gnu-nat' and 'show debug gnu-nat'.
6532 * i386-nat.c (_initialize_i386_nat): Replace 'maint
6533 show-debug-registers' with 'maint set show-debug-registers' and
6534 'maint show show-debug-registers'.
6535 * mips-linux-nat.c (_initialize_mips_linux_nat): Replace 'maint
6536 show-debug-registers' with 'maint set show-debug-registers' and
6537 'maint show show-debug-registers'.
6539 2009-05-12 Joel Brobecker <brobecker@adacore.com>
6541 * c-lang.c (print_wchar): Convert w into a gdb_wchar_t before
6542 pushing it on the output obstack.
6544 2009-05-11 Joel Brobecker <brobecker@adacore.com>
6546 Fix internal error on breaking at a multi-locations caller source line.
6547 * breakpoint.c (parse_breakpoint_sals): Set EXPLICIT_PC for the `break'
6548 command with no parameters.
6550 2009-05-11 Pedro Alves <pedro@codesourcery.com>
6552 * linux-nat.c (enum sigchld_state): Delete.
6553 (linux_nat_async_events_state): Delete.
6554 (struct waitpid_result): Delete.
6555 (waitpid_queue): Delete.
6556 (queued_waitpid_1): Delete.
6557 (async_file_flush): New.
6558 (queued_waitpid, push_waitpid): Delete.
6559 (async_file_mark): New.
6560 (drain_queued_events): Delete.
6561 (my_waitpid): Remove locally queued events handling.
6562 (linux_test_for_tracefork): Upjust.
6563 (linux_child_follow_fork): Ditto.
6564 (sync_sigchld_action): Delete.
6565 (blocked_mask): Reinstate.
6566 (async_sigchld_action): Rename to...
6567 (sigchld_action): ... this.
6568 (block_child_signals): New.
6569 (restore_child_signals_mask): New.
6570 (lin_lwp_attach_lwp): Adjust.
6571 (linux_nat_create_inferior): Ditto.
6572 (linux_nat_attach): Also use lp->status in async mode.
6573 (get_pending_status): Don't use queued_waitpid.
6574 (linux_nat_detach): Don't drain locally queued events.
6575 (linux_nat_resume): Allow pending wait statuses stored lp->status
6576 in async mode. If returning early due to a pending event,
6577 re-register the event source.
6578 (stop_wait_callback): Allow pending wait statuses stored
6579 lp->status in async mode.
6580 (pipe_to_local_event_queue, local_event_queue_to_pipe): Delete.
6581 (linux_nat_wait): Rename to ...
6582 (linux_nat_wait_1): ... this. Allow pending wait statuses stored
6583 lp->status in async mode. Always add WNOHANG to the waitpid
6584 options in async mode.
6585 (linux_nat_wait): New.
6586 (kill_callback): Don't drain locally queued events.
6587 (sigchld_handler): Rewrite.
6588 (linux_nat_is_async_p, linux_nat_can_async_p): Fix comments to
6589 refer to "set target-async".
6590 (linux_nat_async_mask): If in non-stop, and re-enabling async
6591 mode, re-register the target event source in the event loop.
6592 (linux_nat_event_pipe_pop, linux_nat_event_pipe_push)
6593 (get_pending_events, async_sigchld_handler)
6594 (linux_nat_async_events): Delete.
6595 (handle_target_event): New.
6596 (linux_nat_async_file_handler): Delete.
6597 (linux_async_pipe): New.
6598 (linux_nat_async): Only re-register in the event loop if not
6599 registered yet. Always notify the event-loop once if enabling the
6601 (linux_nat_stop_lwp): Rewrite to handle pending events stored in
6602 lp->status, not in the locally queued event list.
6603 (linux_nat_stop): Don't mask out async event handling.
6604 (linux_nat_setup_async): Delete.
6605 (_initialize_linux_nat): Adjust.
6606 (lin_thread_get_thread_signals): blocked_mask is global again.
6609 2009-05-11 Pierre Muller <muller@ics.u-strasbg.fr>
6611 Unify target macros.
6613 * target.h (STOPPED_BY_WATCHPOINT): Delete, replaced by ...
6614 (target_stoppped_by_watchpoint): New macro.
6615 (HAVE_STEPPABLE_WATCHPOINT): Delete, replaced by ...
6616 (target_have_steppable_watchpoint): New macro.
6617 (HAVE_CONTINUABLE_WATCHPOINT): Delete, replace by ...
6618 (target_have_continuable_watchpoint): New macro.
6619 (TARGET_CAN_USE_HARDWARE_WATCHPOINT):Delete, replaced by ...
6620 (target_can_use_hardware_watchpoint): New macro.
6621 (TARGET_REGION_OK_FOR_HW_WATCHPOINT):Delete, replaced by ...
6622 (target_region_ok_for_hw_watchpoint): New macro.
6624 * breakpoint.c (update_watchpoint): Use new macros.
6625 (bpstat_alloc): Likewise.
6626 (create_breakpoint): Likewise.
6627 (watch_command_1): Likewise.
6628 (can_use_hardware_watchpoint): Likewise.
6629 (do_enable_breakpoint): Likewise.
6630 * infrun.c (handle_inferior_event): Adapt to new macros.
6631 * mips-tdep.c (mips_gdbarch_init): Update comments.
6632 * procfs.c (procfs_set_watchpoint): Update comment.
6633 (procfs_insert_watchpoint): Adapt to new macros.
6634 * remote-m32r-sdi.c (m32r_stop):
6635 * remote-mips.c (mips_remove_breakpoint):
6636 * target.c (debug_to_region_ok_for_hw_watchpoint): Update to new macros.
6637 (debug_to_stopped_by_watchpoint): Likewise.
6640 2009-05-10 Pierre Muller <muller@ics.u-strasbg.fr>
6642 * src/gdb/target.h: Remove all tests for already defined
6643 macros. All macros defined here should not be set in config
6646 2009-05-08 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
6648 * ppc-linux-nat.c (have_ptrace_getsetregs): New variable.
6649 (have_ptrace_getsetfpregs): Likewise.
6650 fetch_all_gp_regs): New function.
6651 (fetch_gp_regs): New function.
6652 (fetch_all_fp_regs): Likewise.
6653 (fetch_fp_regs): New function.
6654 (fetch_ppc_registers): Using the new methods to fetch general-
6655 purpose and floating-pointer registers.
6656 (store_all_gp_regs): New function.
6657 (store_gp_regs): Likewise.
6658 (store_all_fp_regs): New function.
6659 (store_fp_regs): Likewise.
6660 (store_ppc_registers): Using the new methods to store general-
6661 purpose and floating-pointer registers.
6663 2009-05-08 Doug Evans <dje@google.com>
6665 * linux-nat.c (linux_xfer_siginfo): Delete unused locals lp, n.
6667 2009-05-07 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
6669 * MAINTAINERS (Write After Approval): Add self.
6671 2009-05-07 Joel Brobecker <brobecker@adacore.com>
6673 * gdbarch.h (target_gdbarch): Add comment documenting this global.
6675 2009-05-06 Joel Brobecker <brobecker@adacore.com>
6677 * acinclude.m4 (AM_ICONV): Prefer in-tree libiconv if present over
6679 * configure: Regenerate.
6681 2009-05-06 Joel Brobecker <brobecker@adacore.com>
6683 * utils.c: Add include of gdb_usleep.h.
6684 (defaulted_query): Detect false EOF conditions that happen
6685 on terminals opened with the O_NONBLOCK flag when there is
6688 2009-05-06 Pedro Alves <pedro@codesourcery.com>
6690 * inferior.c (add_inferior): Move observer_notify_new_inferior
6692 (add_inferior_silent): ... here.
6694 2009-05-06 Pierre Muller <muller@ics.u-strasbg.fr>
6695 Pedro Alves <pedro@codesourcery.com>
6697 * procfs.c (procfs_insert_watchpoint, procfs_remove_watchpoint)
6698 (procfs_region_ok_for_hw_watchpoint, procfs_use_watchpoints): New
6700 (procfs_stopped_by_watchpoint): Made static, ptid argument
6702 (_initialize_procfs): Register new watchpoint related target
6704 * config/i386/nm-i386sol2.h (TARGET_CAN_USE_HARDWARE_WATCHPOINT)
6705 (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT, STOPPED_BY_WATCHPOINT)
6706 (HAVE_CONTINUABLE_WATCHPOINT): Delete.
6707 (target_insert_watchpoint, target_remove_watchpoint): Delete.
6708 (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete
6710 * config/mips/nm-irix5.h (STOPPED_BY_WATCHPOINT)
6711 (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT): Delete.
6712 (target_insert_watchpoint, target_remove_watchpoint): Delete.
6713 (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete
6715 * config/sparc/nm-sol2.h (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT)
6716 (HAVE_CONTINUABLE_WATCHPOINT, STOPPED_BY_WATCHPOINT): Delete.
6717 (target_insert_watchpoint, target_remove_watchpoint): Delete.
6718 (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete
6721 2009-05-06 Hui Zhu <teawater@gmail.com>
6723 * i386-tdep.c (i386_process_record): Change bzero to memset.
6725 2009-05-06 Hui Zhu <teawater@gmail.com>
6727 * NEWS: Add item for process record and replay.
6729 2009-05-05 Maxim Grigoriev <maxim2405@gmail.com>
6731 * xtensa-tdep.c (xtensa_frame_cache): Use pc instead of cache->pc.
6733 2009-05-05 Ulrich Weigand <uweigand@de.ibm.com>
6735 * inferior.h (read_pc, write_pc): Remove.
6736 * regcache.c (read_pc, write_pc): Remove.
6738 * infrun.c (displaced_step_fixup): Use regcache_read_pc instead
6740 (handle_inferior_event): Use regcache_read_pc instead of read_pc
6741 when determining value of stop_pc. Replace subsequent uses of
6742 read_pc by inspecting already-retrieved stop_pc value.
6743 (keep_going): Use regcache_read_pc instead of read_pc.
6745 * breakpoint.c (watchpoint_check): Use current frame architecture
6746 and PC instead of current_gdbarch and read_pc ().
6747 * tracepoint.c (set_traceframe_context): Replace PC argument
6748 with FRAME argument.
6749 (trace_start_command, finish_tfind_command): Update calls.
6750 (finish_tfind_command): Compare frame IDs to identify transitions
6752 (trace_find_pc_command): Use regcache_read_pc instead of read_pc.
6753 * rs6000-nat.c (exec_one_dummy_insn): Pass in regcache instead
6754 of gdbarch. Use regcache_read_pc and regcache_write_pc instead
6755 of read_pc and write_pc.
6756 (store_register): Make regcache argument non-const. Update call
6757 to exec_one_dummy_insn.
6759 * thread.c (switch_to_thread): Use regcache_read_pc instead of read_pc.
6760 * infcmd.c (post_create_inferior): Likewise.
6761 * solib-darwin.c (darwin_solib_create_inferior_hook): Likewise.
6762 * solib-pa64.c (pa64_solib_create_inferior_hook): Likewise.
6763 * solib-sunos.c (sunos_solib_create_inferior_hook): Likewise.
6764 * solib-svr4.c (enable_break, svr4_relocate_main_executable): Likewise.
6765 * linux-fork.c (fork_load_infrun_state): Likewise.
6766 * hppa-hpux-tdep.c (hppa_hpux_push_dummy_code): Likewise.
6767 * record.c (record_wait): Likewise.
6768 * procfs.c (procfs_wait): Likewise.
6769 * remote-mips.c (common_open, mips_wait): Likewise.
6770 * remote-m32r-sdi.c (m32r_resume): Likewise.
6772 * symfile.c (generic_load): Use regcache_write_pc instead of write_pc.
6773 * monitor.c (monitor_create_inferior, monitor_load): Likewise.
6774 * m32r-rom.c (m32r_load, m32r_upload_command): Likewise.
6775 * remote-m32r-sdi.c (m32r_create_inferior, m32r_load): Likewise.
6776 * remote-mips.c (mips_create_inferior, mips_load): Likewise.
6778 * solib-darwin.c: Include "regcache.h".
6779 * solib-pa64.c: Include "regcache.h".
6780 * solib-svr4.c: Include "regcache.h.".
6782 * symfile.c: Do not mention read_pc or write_pc in comments.
6783 * dink32-rom.c: Likewise.
6784 * m32r-rom.c: Likewise.
6785 * mips-tdep.c: Likewise.
6787 2009-05-05 Ulrich Weigand <uweigand@de.ibm.com>
6789 * fork-child.c (startup_inferior): Move setting stop_pc ...
6790 * infcmd.c (post_create_inferior): ... to here.
6792 2009-05-04 Michael Snyder <msnyder@vmware.com>
6794 * NEWS: Add item for reverse debugging commands.
6796 2009-05-04 Pedro Alves <pedro@codesourcery.com>
6798 * go32-nat.c (go32_stop): Delete.
6799 (go32_kill_inferior): Rewrite to only call go32_mourn_inferior.
6800 (go32_create_inferior): Don't call go32_stop or
6802 (go32_mourn_inferior): Inline go32_stop and go32_kill_inferior
6804 (init_go32_ops): Don't register go32_stop.
6806 2009-05-02 Eli Zaretskii <eliz@gnu.org>
6808 * dbxread.c (read_dbx_symtab): Avoid compiler warnings for
6811 * infcall.c (find_function_addr): Avoid compiler warnings for
6814 2009-05-01 Jan Kratochvil <jan.kratochvil@redhat.com>
6816 * dictionary.c (dict_hashed_vector, dict_hashed_expandable_vector)
6817 (dict_linear_vector, dict_linear_expandable_vector): Fix a comment typo.
6819 2009-05-01 Doug Evans <dje@google.com>
6821 * linux-thread-db.c (thread_db_pid_to_str): Delete unused assignment
6824 2009-05-01 Eli Zaretskii <eliz@gnu.org>
6826 * record.c (_initialize_record): Reformat and clarify doc strings
6827 for stop-at-limit and insn-number-max.
6829 * go32-nat.c: Add comments about dirty secrets of DJGPP debugging.
6831 2009-05-01 Jan Kratochvil <jan.kratochvil@redhat.com>
6833 Make specifiable the make_function_type type memory ownership.
6834 * gdbtypes.c (make_function_type): New parameter `objfile', use it
6835 explicitely instead of TYPE-initialized removed local variable
6836 `objfile'. Describe `objfile' it in the function comment.
6837 (lookup_function_type): Update make_function_type callers.
6838 * gdbtypes.h (make_function_type): Update the prototype.
6839 * jv-lang.c (java_link_class_type): Update make_function_type callers.
6840 * dwarf2read.c (read_subroutine_type): Likewise.
6841 * stabsread.c (read_type): Likewise.
6843 2009-05-01 Eli Zaretskii <eliz@gnu.org>
6845 * go32-nat.c (go32_pid_to_str): Call normal_pid_to_str instead of
6846 printing a bogus "Thread <main>".
6847 (go32_thread_alive): Don't return 1 for null_ptid.
6849 * i386-tdep.c (i386_go32_init_abi): Override the number of
6850 registers due to non-support of SSE.
6852 2009-04-30 Anthony Green <green@moxielogic.com>
6854 * configure.tgt: Link the moxie simulator in with gdb.
6856 2009-04-30 Paul Pluzhnikov <ppluzhnikov@google.com>
6858 * elfread.c (elf_symtab_read): Don't assume .data and .rodata
6861 2009-04-30 Hui Zhu <teawater@gmail.com>
6862 Michael Snyder <msnyder@vmware.com>
6864 I386 Linux process record and replay support.
6866 * i386-linux-tdep.c (i386_linux_record_tdep): New variable.
6867 This struct has the argument for the function
6868 "record_linux_system_call".
6869 (i386_linux_intx80_sysenter_record): New function. Parse the
6870 system call instruction and call function
6871 "record_linux_system_call" to record execute log.
6872 (i386_linux_init_abi): Initialize "i386_linux_record_tdep".
6873 Set "i386_linux_intx80_sysenter_record" to
6874 "i386_intx80_record" and "i386_sysenter_record".
6876 2009-04-30 Hui Zhu <teawater@gmail.com>
6877 Michael Snyder <msnyder@vmware.com>
6879 I386 architecture process record and replay support.
6881 * i386-tdep.c (PREFIX_REPZ, PREFIX_REPNZ, PREFIX_LOCK,
6882 PREFIX_DATA, PREFIX_ADDR): New macros. Help decode the i386
6884 (aflag, dflag, override, modrm, mod, reg, rm, ot,
6885 i386_record_pc): New variables. Ditto.
6886 (i386_record_modrm, i386_record_lea_modrm_addr,
6887 i386_record_lea_modrm): New functions. Ditto.
6888 (i386_process_record): New function. Parse the instruction in
6889 address "addr" and record the values of registers and memory
6890 that will be changed by this instruction.
6891 (i386_gdbarch_init): Set "i386_process_record" to GDBARCH
6892 "process_record" interface.
6893 * i386-tdep.h (gdbarch_tdep): New function pointers
6894 "i386_intx80_record" and "i386_sysenter_record" that point to
6895 the function that can record "intx80" and "sysenter" execute
6898 2009-04-30 Hui Zhu <teawater@gmail.com>
6899 Michael Snyder <msnyder@vmware.com>
6901 * infrun.c (use_displaced_stepping): Return false if process
6902 record and replay target is used.
6903 (proceed): Call function "record_not_record_set" if pocess
6904 record and replay target is used.
6906 2009-04-30 Hui Zhu <teawater@gmail.com>
6907 Michael Snyder <msnyder@vmware.com>
6909 Linux process record and replay support.
6911 * Makefile.in (ALLDEPFILES): Add linux-record.c.
6912 (ALL_TARGET_OBS): Add linux-record.o.
6913 * configure.tgt (x86_64-*-linux*): Add linux-record.o.
6914 (i[34567]86-*-linux*): Add linux-record.o.
6915 * linux-record.c, linux-record.h: New file.
6917 2009-04-30 Hui Zhu <teawater@gmail.com>
6918 Michael Snyder <msnyder@vmware.com>
6920 Process record and replay target.
6922 * Makefile.in (SFILES): Add record.c.
6923 (COMMON_OBS): Add record.o.
6924 * record.c, record.h: New file.
6926 2009-04-30 Hui Zhu <teawater@gmail.com>
6927 Michael Snyder <msnyder@vmware.com>
6929 * target.h (strata): New stratum "record_stratum".
6931 2009-04-30 Hui Zhu <teawater@gmail.com>
6932 Michael Snyder <msnyder@vmware.com>
6934 GDBARCH interface for process record and replay.
6936 * gdbarch.sh (process_record): This interface point to the
6937 function that records the inferior execute log.
6939 2009-04-29 Doug Evans <dje@google.com>
6941 * i386-nat.c (child_post_startup_inferior): Delete, unused.
6943 2009-04-29 Pedro Alves <pedro@codesourcery.com>
6945 * breakpoint.c (print_exception_catchpoint): Access `b' directly
6946 instead of `b->loc->owner'.
6947 (print_mention_exception_catchpoint): Ditto.
6949 2009-04-29 Jan Kratochvil <jan.kratochvil@redhat.com>
6951 * macrocmd.c (info_macro_command): Print -Dname=value if LINE is zero.
6953 2009-04-27 Tom Tromey <tromey@redhat.com>
6955 * c-exp.y (yylex): Handle '[' and ']' like '(' and ')'.
6957 2009-04-27 Jerome Guitton <guitton@adacore.com>
6959 * symtab.c (append_exact_match_to_sals): New function, extracted
6960 from expand_line_sal.
6961 (expand_line_sal): Use append_exact_match_to_sals to append exact
6962 matches. If none found, append all best items.
6964 2009-04-27 Jerome Guitton <guitton@adacore.com>
6966 * main.c (captured_main): Move gdbinit lookups after gdb_init.
6968 2009-04-27 Jan Kratochvil <jan.kratochvil@redhat.com>
6971 * dwarf2read.c (unsigned_int_compar, inherit_abstract_dies): New.
6972 (read_func_scope): Call inherit_abstract_dies.
6974 2009-04-25 Eli Zaretskii <eliz@gnu.org>
6976 * Makefile.in (ALLDEPFILES): Remove duplicate entries for
6977 sparc-sol2-nat.c and sparc-sol2-tdep.c.
6979 * stack.c (_initialize_stack) <disassemble-next-line>: Doc fix.
6981 2009-04-24 Pierre Muller <muller@ics.u-strasbg.fr>
6983 ARI change: Use "/* ARI: rule */" pattern.
6984 * utils.c: Update ARI patterns.
6985 * gdb_dirent.h: Likewise.
6987 2009-04-23 Anthony Green <green@moxielogic.com>
6989 * MAINTAINERS: Add moxie target.
6990 * configure.tgt: Add moxie-*-elf target.
6991 * moxie-tdep.c: New file.
6992 * moxie-tdep.h: New file.
6994 2009-04-23 Joel Brobecker <brobecker@adacore.com>
6996 * ada-lang.c: Remove an extra empty line. No code change.
6998 2009-04-23 Jan Kratochvil <jan.kratochvil@redhat.com>
7000 Fix double free on error inserting the breakpoint instruction.
7001 * breakpoint.c (create_breakpoints): Move the
7002 update_global_location_list call to ...
7003 (break_command_really): ... here together with the second local call
7004 both unified after all the cleanups.
7006 2009-04-23 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
7007 Tom Tromey <tromey@redhat.com>
7009 * configure, config.in: Regenerate.
7010 * configure.ac: Support for relocatable GDB datadir. Use
7011 GDB_AC_WITH_DIR. Always define TARGET_SYSTEM_ROOT_RELOCATABLE.
7012 * acinclude.m4 (GDB_AC_WITH_DIR): New defun.
7013 * top.c (init_main): Add "set data-directory".
7014 * defs.h (gdb_datadir): Declare.
7015 * main.c (gdb_datadir): New global.
7016 (captured_main): Initialize gdb_datadir. Use relocate_directory.
7017 (relocate_path): New function.
7018 (relocate_directory): Likewise.
7019 (get_init_files): Use relocate_path.
7020 (README): Mention --with-gdb-datadir.
7022 2009-04-23 Joel Brobecker <brobecker@adacore.com>
7024 * ada-tasks (task_command_1): Call target_find_new_threads.
7026 2009-04-23 Joel Brobecker <brobecker@adacore.com>
7028 * stack.c (do_gdb_disassembly): Print the exception message if an
7029 error was thrown while trying to perform the disassembly.
7031 2009-04-22 Jan Kratochvil <jan.kratochvil@redhat.com>
7033 * varobj.c (free_variable): Replace free_current_contents by xfree.
7035 2009-04-22 Kazu Hirata <kazu@codesourcery.com>
7037 * arm-linux-nat.c (fetch_register, store_register): Use
7038 ARM_CPSR_GREGNUM instead of ARM_CPSR_REGNUM.
7039 * arm-linux-tdep.c (arm_linux_supply_gregset,
7040 arm_linux_collect_gregset): Likewise.
7041 * arm-linux-tdep.h (ARM_CPSR_GREGNUM): New.
7042 * arm-tdep.h (ARM_CPSR_REGNUM): Remove.
7044 2009-04-22 Hui Zhu <teawater@gmail.com>
7046 * stack.c (_initialize_stack): Set the default of
7047 disassemble-next-line to off.
7049 2009-04-21 Tom Tromey <tromey@redhat.com>
7051 * acinclude.m4: Use AS_HELP_STRING, not AC_HELP_STRING.
7052 * configure.ac: Use AS_HELP_STRING, not AC_HELP_STRING.
7054 2009-04-21 Andreas Schwab <schwab@linux-m68k.org>
7056 * configure.ac: Add quotes to not lose brackets in help text.
7057 * configure: Rebuild.
7059 2009-04-21 Andreas Schwab <schwab@linux-m68k.org>
7061 * configure.ac: Don't postprocess Makefile in config.status.
7062 Substitute GDB_NM_FILE. Don't substitute nm_h.
7063 * Makefile.in (GDB_NM_FILE): Substitute.
7064 (TAGS): Use $(GDB_NM_FILE) instead of $(NAT_FILE).
7065 * configure: Regenerate.
7066 * gnulib/Makefile.in: Regenerate.
7068 2009-04-21 Joseph Myers <joseph@codesourcery.com>
7070 * configure.ac (--with-datarootdir, --with-docdir, --with-pdfdir,
7071 --with-htmldir): New.
7072 * configure: Regenerate.
7074 2009-04-21 Tom Tromey <tromey@redhat.com>
7076 * configure: Rebuild.
7077 * configure.ac: Use lower case for start of help strings. Clean
7078 up --with-sysroot help.
7080 2009-04-21 Tom Tromey <tromey@redhat.com>
7082 * configure: Rebuild.
7083 * acinclude.m4 (AM_ICONV): Use AC_HELP_STRING.
7084 * configure.ac: Use AC_HELP_STRING. Use upper case for variables
7087 2009-04-21 Pierre Muller <muller@ics.u-strasbg.fr>
7089 ARI fix: remove "%p".
7090 * ia64-tdep.c (ia64_frame_this_id): Use host_address_to_string function.
7091 (ia64_sigtramp_frame_this_id): Ditto.
7092 (ia64_libunwind_frame_this_id): Ditto.
7093 (ia64_libunwind_sigtramp_frame_this_id): Ditto.
7094 * symmisc.c (maintenance_info_psymtabs): Ditto.
7096 2009-04-21 Joseph Myers <joseph@codesourcery.com>
7098 * configure.ac (--with-relocated-sources): New.
7099 * configure, config.in: Regenerate.
7100 * source.c (add_substitute_path_rule): Remove static.
7101 * source.h (add_substitute_path_rule): Declare.
7102 * main.c: Include "source.h".
7103 (captured_main): Add substitution rule if RELOC_SRCDIR.
7105 2009-04-21 Pierre Muller <muller@ics.u-strasbg.fr>
7107 * gnu-nat.h (proc_debug): Add missing continuation line in macro.
7109 2009-04-20 David Daney <ddaney@caviumnetworks.com>
7111 * NEWS: Mention MIPS/Linux hardware watchpoint support.
7113 2009-04-20 David Daney <ddaney@caviumnetworks.com>
7115 * mips-linux-nat.c (command.h, gdbcmd.h, gdb_assert.h): New #includes.
7116 (maint_show_dr, super_close): New variables.
7117 (super_fetch_registers, super_store_registers): Make static.
7118 (PTRACE_GET_WATCH_REGS, PTRACE_SET_WATCH_REGS, W_BIT, R_BIT, I_BIT)
7119 (W_MASK, R_MASK, I_MASK, IRW_MASK, MAX_DEBUG_REGISTER): Define.
7120 (pt_watch_style): Define new enum.
7121 (mips32_watch_regs, mips64_watch_regs, pt_watch_regs, mips_watchpoint):
7123 (watch_readback_valid, watch_readback, current_watches, watch_mirror):
7125 (get_irw_mask, get_reg_mask, get_num_valid, get_watchlo)
7126 (set_watchlo, get_watchhi, set_watchhi, mips_show_dr)
7127 (mips_linux_read_watch_registers, mips_linux_can_use_hw_breakpoint)
7128 (mips_linux_stopped_by_watchpoint, mips_linux_stopped_data_address)
7129 (type_to_irw, fill_mask, try_one_watch)
7130 (mips_linux_region_ok_for_hw_watchpoint, write_watchpoint_regs)
7131 (mips_linux_new_thread, populate_regs_from_watches)
7132 (mips_linux_insert_watchpoint, mips_linux_remove_watchpoint)
7133 (mips_linux_close): New functions.
7134 (_initialize_mips_linux_nat): Register watchpoint functions with
7135 the target_ops. Add show-debug-regs maintenance command.
7137 2009-04-20 David Daney <ddaney@caviumnetworks.com>
7139 * infrun.c (handle_inferior_event): Move gegisters_changed call down.
7141 2009-04-19 Pedro Alves <pedro@codesourcery.com>
7143 * NEWS: Mention gdbserver support for x86 Windows CE.
7145 2009-04-19 Eli Zaretskii <eliz@gnu.org>
7147 * config/djgpp/fnchange.lst: Fix typos.
7149 Set default host and target charsets in the DJGPP port.
7151 * config/djgpp/config.sed (am_cv_langinfo_codeset)
7152 (bash_cv_langinfo_codeset, ac_cv_header_nl_types_h): Set to "yes"
7153 in all configure scripts that define ac_cv_env_CPP_value.
7155 * go32-nat.c (dos_codepage, nl_langinfo): New functions.
7158 * config/djgpp/nl_types.h: New file.
7160 * config/djgpp/langinfo.h: New file.
7162 * config/i386/go32.mh (MH_CFLAGS): Add $(srcdir)/config/djgpp.
7164 2009-04-18 Carlos O'Donell <carlos@codesourcery.com>
7166 * Makefile.in (MAKEHTML): Set to makeinfo --html.
7167 (MAKEHTMLFLAGS): Set to empty.
7169 2009-04-18 Eli Zaretskii <eliz@gnu.org>
7171 * NEWS: Mention all new set/show commands added since GDB 6.8 was
7174 * go32-nat.c (go32_sysinfo): Check if the call to
7175 __dpmi_get_capabilities fills the buffer with information, and
7176 don't use the buffer if not.
7178 2009-04-17 Tom Tromey <tromey@redhat.com>
7180 * charset.c (_initialize_charset): Add special case for "646".
7182 2009-04-17 Carlos O'Donell <carlos@codesourcery.com>
7184 * configure.ac: AC_SUBST datarootdir, docdir, htmldir, pdfdir.
7185 * configure: Regenerate.
7186 * Makefile.in: Set datarootdir, docdir, htmldir, and pdfdir from
7187 configure substitutions.
7188 (FLAGS_TO_PASS): Add datarootdir, docdir, and htmldir.
7190 2009-04-17 Pierre Muller <muller@ics.u-strasbg.fr>
7192 ARI fix: Do not use %p, replace by call to host_address_to_string
7194 * darwin-nat.c (darwin_xfer_partial): Apply change.
7195 * gnu-nat.c (inf_continue, gnu_xfer_memory): Ditto.
7196 * gnu-nat.h (proc_debug): Ditto.
7197 * symmisc.c (maintenance_info_symtabs): Ditto.
7198 (maintenance_info_psymtabs): Ditto.
7199 * windows-nat.c (handle_load_dll): Ditto.
7200 (handle_unload_dll, info_w32_command, handle_exception): Ditto.
7201 * xtensa-tdep.c (xtensa_unwind_pc): Ditto.
7203 2009-04-17 Joseph Myers <joseph@codesourcery.com>
7205 * configure.tgt (i[34567]86-*-linux*): Use 64-bit configuration if
7206 --enable-64-bit-bfd.
7207 (sparc-*-linux*): Likewise.
7209 2009-04-17 Eli Zaretskii <eliz@gnu.org>
7211 * go32-nat.c (go32_sysinfo): Update list of Windows versions of
7214 2009-04-16 Pedro Alves <pedro@codesourcery.com>
7216 * remote.c (remote_query_attached): Fix pasto in packet_ok result
7219 2009-04-16 Joel Brobecker <brobecker@adacore.com>
7221 * procfs.c (solib_mappings_callback, find_memory_regions_callback):
7222 Revert the previous change. Might not be correct, actually.
7224 2009-04-16 Joel Brobecker <brobecker@adacore.com>
7226 * ada-lang.h (ada_adjust_exception_stop, ada_print_exception_stop)
7227 (ada_get_current_task, ada_print_exception_breakpoint_nontask)
7228 (ada_print_exception_breakpoint_task, ada_reset_thread_registers):
7229 Remove declaration. These are non-existent functions.
7231 2009-04-16 Joel Brobecker <brobecker@adacore.com>
7233 * procfs.c (solib_mappings_callback, find_memory_regions_callback):
7234 Fix a compilation warning on mips-irix due to casting from
7235 a pointer of different size.
7237 2009-04-16 Joel Brobecker <brobecker@adacore.com>
7239 * ada-lang.c (symtab_for_sym): Delete.
7240 (user_select_syms): Use sym->symtab instead of calling symtab_for_sym.
7242 2009-04-16 Joel Brobecker <brobecker@adacore.com>
7244 * ada-lang.c (extract_string): Delete.
7245 (ada_main_name): Reimplement using target_read_string instead of
7248 2009-04-16 Andreas Schwab <schwab@linux-m68k.org>
7250 * m68klinux-nat.c: Remove obsolete comment.
7251 (fetch_register, store_register): Don't call
7252 gdbarch_cannot_fetch_register or gdbarch_cannot_store_register,
7253 which are always nops here.
7255 2009-04-14 Tom Tromey <tromey@redhat.com>
7257 * c-lang.c (c_emit_char): Use INTERMEDIATE_ENCODING.
7258 (c_printstr): Likewise.
7259 * charset.c: Include gdb_wait.h.
7260 (make_wchar_iterator): Use INTERMEDIATE_ENCODING.
7261 (find_charset_names): Use pexecute. Handle libiconv's output.
7263 (_initialize_charset): Use xstrdup.
7264 * gdb_wchar.h: Check HAVE_BTOWC. Split PHONY_ICONV and wchar
7266 (INTERMEDIATE_ENCODING): New define.
7267 * configure, config.in: Rebuild.
7268 * configure.ac: Check for btowc.
7270 2009-04-15 Tom Tromey <tromey@redhat.com>
7272 * c-lang.c (evaluate_subexp_c): Correctly handle EVAL_SKIP.
7274 2009-04-15 Eli Zaretskii <eliz@gnu.org>
7276 * utils.c (parse_escape): Initialize target_char to pacify GCC.
7278 2009-04-14 Jan Kratochvil <jan.kratochvil@redhat.com>
7280 * c-lang.c (c_get_string): Fix xfree crash on a failed string read.
7282 2009-04-14 Pierre Muller <muller@ics.u-strasbg.fr>
7284 ARI fix: sprintf rule.
7285 * ada-exp.y (convert_char_literal): Replace sprintf by xsnprintf.
7286 * ada-lang.c (add_angle_brackets): Use xstrprintf.
7287 (ada_decode): Replace sprintf by xsnprintf.
7288 (find_old_style_renaming_symbol): Ditto.
7289 (ada_to_fixed_type_1, ada_enum_name): Ditto.
7292 2009-04-14 Joel Brobecker <brobecker@adacore.com>
7294 * target.c (target_mourn_inferior): Call bfd_cache_close_all
7295 after having executed the target mourn_inferior routine.
7297 2009-04-14 Eli Zaretskii <eliz@gnu.org>
7299 * config/djgpp/djconfig.sh (DEPDIR): Define to "_deps", if
7302 2009-04-13 David Daney <ddaney@caviumnetworks.com>
7304 * infrun.c (maybe_software_singlestep): New function.
7305 (resume): Call maybe_software_singlestep.
7306 (handle_inferior_event): Same.
7308 2009-04-13 Tom Tromey <tromey@redhat.com>
7310 * python/python-frame.c (frapy_richcompare): Return
7311 Py_NotImplemented, not an error. Handle Py_NE as well.
7313 2009-04-13 Eli Zaretskii <eliz@gnu.org>
7315 * charset.c (EILSEQ): Define if not defined by system headers.
7317 2009-04-11 Eli Zaretskii <eliz@gnu.org>
7319 * config/djgpp/config.sed: Tweak ac_config_files in intl/configure
7320 to be consistent with renaming config.intl.in into config_intl.in.
7322 * go32-nat.c (go32_attach, go32_detach): Fix prototypes to be
7323 consistent with the change from 2008-11-09.
7325 2009-04-10 Jan Kratochvil <jan.kratochvil@redhat.com>
7327 * gdbtypes.c: Remove excessive parentheses at the return keywords.
7328 * varobj.c (varobj_invalidate): Fix indentation.
7329 * varobj.c (varobj_invalidate): Fix formatting text width.
7331 2009-04-08 Vladimir Prus <vladimir@codesourcery.com>
7333 Implement -exec-jump.
7335 * mi/mi-cmds.h (mi_cmd_exec_jump): Declare.
7336 * mi/mi-main.c (mi_cmd_exec_jump): New.
7337 * mi/mi-cmds.c (mi_cmds): Register exec-jump.
7339 2009-04-07 Doug Evans <dje@google.com>
7341 * symfile.c (symbol_file_clear): Fix indentation.
7343 2009-04-06 Mark Kettenis <kettenis@gnu.org>
7345 * sparc64nbsd-nat.c (sparc64nbsd_supply_pcb): Fix comment.
7347 2009-04-03 Ulrich Weigand <uweigand@de.ibm.com>
7349 * ppc-linux-nat.c (ppc_linux_target_wordsize): New function.
7350 (ppc_linux_auxv_parse): New function.
7351 (ppc_linux_read_description): Use ppc_linux_target_wordsize.
7352 (_initialize_ppc_linux_nat): Install ppc_linux_auxv_parse.
7354 2009-04-03 Ulrich Weigand <uweigand@de.ibm.com>
7356 * spu-linux-nat.c (spu_bfd_open): Set filename of in-memory
7357 BFD to contents of SPU name note.
7358 (spu_symbol_file_add_from_memory): Call symbol_file_add_from_bfd
7359 with "from_tty" argument 1 instead of 0.
7361 2009-04-02 Jan Kratochvil <jan.kratochvil@redhat.com>
7364 (new_symbol <DW_TAG_variable> <!DW_AT_location> <DW_AT_external>):
7365 Create the symbol in local scope.
7366 * symtab.h (cu->list_in_scope <LOC_UNRESOLVED>): New comment part.
7368 2009-04-02 Keith Seitz <keiths@redhat.com>
7370 * stabsread.c (read_member_functions): GCC may emit an extra space
7371 at the end of the names "__base_ctor" and "__base_dtor"; so ignore
7372 whitespace when looking for these functions.
7374 2009-04-01 Joel Brobecker <brobecker@adacore.com>
7376 Change the default value for "set print frame-arguments" to scalars.
7378 * stack.c (print_frame_arguments): Set initial value to "scalars".
7380 2009-04-01 Aleksandar Ristovski <aristovski@qnx.com>
7382 * mips-tdep.c (mips_numeric_register_alieses): New definition.
7383 (mips_gdbarch_init): Add user registers from
7384 mips_numeric_register_aliases.
7386 2009-04-01 Joel Brobecker <brobecker@adacore.com>
7388 * linux-nat.c (linux_nat_filter_event): Minor comment reformatting.
7390 2009-04-01 Joel Brobecker <brobecker@adacore.com>
7392 * linux-nat.c (linux_nat_filter_events): Do not delete the lwp if
7393 this is the last one.
7395 2009-04-01 Pedro Alves <pedro@codesourcery.com>
7397 * remote.c (append_resumption): New.
7398 (remote_vcont_resume): Use it.
7400 2009-04-01 Joel Brobecker <brobecker@adacore.com>
7402 * windows-nat.c (+windows_get_ada_task_ptid): New function.
7403 (init_windows_ops): Set windows_ops.to_get_ada_task_ptid.
7405 2009-03-31 Daniel Jacobowitz <dan@codesourcery.com>
7406 Keith Seitz <keiths@redhat.com>
7407 Jan Kratochvil <jan.kratochvil@redhat.com>
7410 * Makefile.in (dbxread.o): Update.
7411 * dbxread.c (read_dbx_symtab): Use cp_canonicalize_string.
7412 * dwarf2read.c (GDB_FORM_cached_string): New.
7413 (read_partial_die): Use dwarf2_canonicalize_name.
7414 (dwarf2_linkage_name): Use dwarf2_name.
7415 (dwarf2_canonicalize_name): New.
7416 (dwarf2_name): Use dwarf2_canonicalize_name.
7417 (dwarf_form_name, dump_die): Handle GDB_FORM_cached_string.
7418 * stabsread.c (define_symbol, read_type): Use cp_canonicalize_string.
7419 * symtab.c (lookup_symbol_in_language): Canonicalize input before
7421 * cp-name-parser.y: operator() requires two parameters,
7422 according to libiberty.
7423 * minsyms.c (lookup_minimal_symbol): Canonicalize input
7427 2009-03-31 Joel Brobecker <brobecker@adacore.com>
7429 Provide support for (Ada) task-specific breakpoints.
7431 * ada-lang.h (ada_get_task_number): Add declaration.
7432 (breakpoint_ada_task_match): Delete declaration.
7433 * ada-tasks.c (ada_get_task_number): Make non-static.
7434 * breakpoint.h (struct breakpoint): Add field "task".
7435 * breakpoint.c (print_one_breakpoint_location): Add handling of
7436 task-specific breakpoints.
7437 (create_breakpoint, create_breakpoints, find_condition_and_thread):
7438 New parameter "task".
7439 (break_command_really): Update calls to find_condition_and_thread
7440 and create_breakpoints.
7441 (breakpoint_re_set_one): Update call to find_condition_and_thread.
7444 2009-03-31 Joel Brobecker <brobecker@adacore.com>
7446 * ada-tasks.c (short_task_info): Eliminate the "Running" task state.
7448 2009-03-31 Pedro Alves <pedro@codesourcery.com>
7450 * remote.c (remote_notice_new_inferior): Use ptid_is_pid. Check
7451 if the thread's ptid without a thread id field is in the list
7452 before calling thread_change_ptid.
7453 (extended_remote_attach_1): In non-stop mode, do not rely on
7454 querying the current thread, instead, query the thread list, and
7455 select the first thread of the process.
7456 * gdbthread.h (first_thread_of_process): Declare.
7457 * thread.c (first_thread_of_process): Define.
7459 2009-03-30 Stan Shebs <stan@codesourcery.com>
7461 Make tracepoints into a type of breakpoint.
7462 * breakpoint.h (enum bptype): Add bp_tracepoint.
7463 (struct breakpoint): Add fields step_count, pass_count, actions.
7464 (get_tracepoint, get_tracepoint_by_number): Declare.
7465 (all_tracepoints): Declare.
7466 * breakpoint.c: Include tracepoint.h, readline.h.
7467 (ALL_TRACEPOINTS): Move here from tracepoint.c.
7468 (tracepoint_count): Ditto.
7469 (should_be_inserted): GDB does not insert tracepoints itself.
7470 (print_it_typical): Add tracepoint case.
7471 (bpstat_what): Ditto.
7472 (print_one_breakpoint_location): Ditto, and add printing for
7473 pass count, step count, and action list.
7474 (user_settable_breakpoint): Add tracepoint case.
7475 (allocate_bp_location): Ditto.
7476 (set_breakpoint_location_function): Ditto.
7477 (disable_breakpoints_in_shlibs): Ditto.
7479 (break_command_really): Add argument traceflag, use to choose
7480 basic breakpoint type.
7481 (break_command_1): Pass extra argument.
7482 (set_breakpoint, handle_gnu_v3_exceptions): Ditto.
7483 (breakpoint_re_set_one): Add tracepoint case.
7484 (disable_command, enable_command): Ditto.
7485 (set_tracepoint_count): Move here from tracepoint.c.
7486 (trace_command): Move here from tracepoint.c and use
7487 break_command_really.
7488 (tracepoints_info): Move here from tracepoint.c and call
7490 (enable_trace_command): Move here from tracepoint.c and call
7492 (disable_trace_command): Move here from tracepoint.c and call
7494 (delete_trace_command): Move here from tracepoint.c and call
7496 (trace_pass_command): Move here from tracepoint.c.
7497 (get_tracepoint_by_number): Ditto.
7498 (tracepoint_save_command): Ditto.
7499 (get_tracepoint): New function.
7500 (all_tracepoints): New function.
7501 (_initialize_breakpoint): Move tracepoint init from tracepoint.c,
7502 deprecate "enable trace" and "disable trace" commands.
7503 * tracepoint.h (struct tracepoint): Remove.
7504 (tracepoint_chain): Remove decl.
7505 (deprecated_create_tracepoint_hook): Remove decl.
7506 (deprecated_delete_tracepoint_hook): Remove decl.
7507 (deprecated_modify_tracepoint_hook): Remove decl.
7508 (ALL_TRACEPOINTS, ALL_TRACEPOINTS_SAFE): Remove.
7509 (free_actions): Update signature.
7510 (validate_actionline): Update signature.
7511 (end_actions_pseudocommand): Declare.
7512 (while_stepping_pseudocommand): Declare.
7513 * tracepoint.c: Include breakpoint.h.
7514 (tracepoint_chain, tracepoint_count): Remove.
7515 (free_actions, make_cleanup_free_actions): Update signature.
7516 (trace_command, set_raw_tracepoint): Remove.
7517 (trace_mention): Remove.
7518 (tracepoints_info): Remove.
7519 (tracepoint_operation, map_args_over_tracepoints): Remove.
7520 (get_tracepoint_by_number): Remove.
7521 (enable_trace_command, disable_trace_command): Remove.
7522 (delete_trace_command, trace_pass_command): Remove.
7523 (trace_actions_command, read_actions): Update signature.
7524 (validate_actionline): Update signature, use bp loc.
7525 (encode_actions): Ditto.
7526 (download_tracepoint): New function, body of trace_start_command.
7527 (trace_start_command): Call it, use all_tracepoints.
7528 (tracepoint_save_command): Remove.
7529 (tracepoint_dump_command): Use get_tracepoint.
7530 (end_actions_pseudocommand): Make globally visible.
7531 (while_stepping_pseudocommand): Ditto.
7532 (_initialize_tracepoint): Move command definitions to breakpoint.c.
7534 2009-03-30 Thiago Jung Bauermann <bauerman@br.ibm.com>
7536 Expose frames to Python.
7537 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-frame.o.
7538 (SUBDIR_PYTHON_SRCS): Add python-frame.c.
7539 (python-frame.o): New target.
7540 * python/python-frame.c: New file.
7541 * python/python-internal.h (gdbpy_frames, gdbpy_newest_frame,
7542 gdbpy_frame_stop_reason_string, gdbpy_selected_frame,
7543 gdbpy_initialize_frames): New prototypes.
7544 * python/python.c (_initialize_python): Call gdbpy_initialize_frames.
7545 (GdbMethods): Add `selected_frame' and `frame_stop_reason_string'
7547 * stack.c (find_frame_funname): New function, factored out of
7549 (print_frame): Call find_frame_funname.
7550 * stack.h (find_frame_funname): Add prototype.
7552 2009-03-29 Thiago Jung Bauermann <bauerman@br.ibm.com>
7554 Remove unused value_object attribute `owned_by_gdb'.
7555 * python/python-value.c (value_object): Remove owned_by_gdb
7557 (valpy_dealloc): Remove reference to self->owned_by_gdb.
7558 (valpy_new): Likewise.
7559 (value_to_value_object): Likewise.
7561 2009-03-29 Thiago Jung Bauermann <bauerman@br.ibm.com>
7563 Change gdb.Value.address from a method to an attribute.
7564 * python/python-value.c (value_object): Add `address' element.
7565 (valpy_dealloc): Decrement reference to self->address if set.
7566 (valpy_new): Initialize val_obj->address.
7567 (valpy_address): Rename to ...
7568 (valpy_get_address): ... this. Change signature from method to
7569 attribute. Update self->address if not set.
7570 (value_to_value_object): Initialize val_obj->address.
7571 (value_object_getset): Add `address' element.
7572 (value_object_methods): Remove `address' element.
7574 2009-03-29 Andreas Schwab <schwab@linux-m68k.org>
7576 * observer.sh: Set LANG/LC_ALL to C, not c.
7578 2009-03-28 Kevin Buettner <kevinb@redhat.com>
7580 * mn10300-tdep.c (mn10300_gdbarch_init): For mn10300, by default,
7583 2009-03-28 Pedro Alves <pedro@codesourcery.com>
7585 * remote.c (remote_stop_ns): If multi-process extensions are off,
7586 and GDB is requesting the whole process to stop, sent "vCont;t",
7589 2009-03-28 Pedro Alves <pedro@codesourcery.com>
7591 * inf-loop.c (inferior_event_handler): Avoid calling is_running on
7594 2009-03-27 Eli Zaretskii <eliz@gnu.org>
7596 * config/djgpp/fnchange.lst: Update to fix ARI-reported problems.
7598 2009-03-26 Doug Evans <dje@google.com>
7600 * thread.c (do_restore_current_thread_cleanup): Redo test for
7601 whether to restore old->inferior_ptid.
7603 2009-03-26 Tom Tromey <tromey@redhat.com>
7605 * breakpoint.c (resolve_sal_pc): Preserve original line number
7606 when skipping prologue.
7608 2009-03-26 Doug Evans <dje@google.com>
7610 * thread.c (inferior_thread) Remove "extern" in definition.
7612 2009-03-26 Thiago Jung Bauermann <bauerman@br.ibm.com>
7614 Add gdb.Value.is_optimized_out attribute.
7615 * python/python-value.c (valpy_get_is_optimized_out): New
7617 (value_object_getset): New variable.
7618 (value_object_type): Initialize tp_getset element.
7620 2009-03-26 Joel Brobecker <brobecker@adacore.com>
7622 Recognize missing DW_AT_location as <value optimized out>.
7624 (new_symbol <DW_TAG_variable> <!DW_AT_location> <!DW_AT_external>):
7625 Call add_symbol_to_list.
7627 2009-03-25 Tom Tromey <tromey@redhat.com>
7629 * gdbtypes.h (CHECK_TYPEDEF): Don't yield a value.
7630 * stack.c (print_this_frame_argument_p): Use check_typedef.
7632 2009-03-25 Tom Tromey <tromey@redhat.com>
7634 * configure: Rebuild.
7635 * acinclude.m4 (AM_ICONV): Set am_cv_use_build_libiconv.
7636 Rearrange flags setting. Add comments.
7638 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
7640 * config/i386/nm-i386.h: Remove code within
7641 I386_WATCHPOINTS_IN_TARGET_VECTOR conditional.
7642 * config/i386/nm-cygwin.h: Remove I386_WATCHPOINTS_IN_TARGET_VECTOR
7644 * config/i386/nm-cygwin64.h: Ditto.
7645 * config/i386/nm-fbsd.h: Ditto.
7646 * config/i386/nm-go32.h: Ditto.
7647 * config/i386/nm-linux.h: Ditto.
7648 * config/i386/nm-linux64.h: Ditto.
7650 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
7652 ARI fix: "xasprintf" rule.
7653 * printcmd.c (sym_info): Replace xasprintf by xstrprintf.
7655 2009-03-25 Pedro Alves <pedro@codesourcery.com>
7657 * remote.c (remote_start_remote): In non-stop mode, call
7658 init_wait_for_inferior before adding threads and inferiors.
7660 2009-03-25 Joel Brobecker <brobecker@adacore.com>
7662 * breakpoint.c (breakpoint_thread_match): Split a large condition
7663 into several smaller conditions. No behavior change.
7665 2009-03-25 Pedro Alves <pedro@codesourcery.com>
7667 * infrun.c (infrun_thread_thread_exit): New.
7668 (_initialize_infrun): Attach it to the thread_exit observer.
7669 * thread.c (delete_thread_1): Always call the observer, passing it
7671 * mi/mi-interp.c (mi_thread_exit): Add "silent" parameter. If
7672 SILENT, return immediately.
7674 2009-03-25 Pedro Alves <pedro@codesourcery.com>
7676 * infrun.c (normal_stop): Use has_stack_frames instead of
7678 * mi/mi-main.c (mi_execute_command): Avoid calling inferior_thread
7679 when there is no thread selected.
7680 (mi_cmd_execute): Don't special case commands that can run without
7681 a valid selected thread.
7682 * top.c (execute_command): Don't special case commands that can
7683 run without a valid selected thread. Use has_stack_frames.
7684 * infcmd.c (ensure_valid_thread): New.
7685 (continue_1, step_1, jump_command, signal_command): Use it.
7686 (detach_command): Error out if there's no selected thread/inferior.
7687 * thread.c (print_thread_info): Allow having no thread selected.
7688 (switch_to_thread): Don't read the PC if there is no current thread.
7689 (do_restore_current_thread_cleanup): Don't record the current
7690 frame if there is no current thread.
7691 (make_cleanup_restore_current_thread): Don't read frame info if
7692 there is no selected thread.
7693 (_initialize_thread): Don't mark commands as
7694 "no_selected_thread_ok".
7695 * frame.c (get_current_frame): Error out if there is no valid
7697 (has_stack_frames): Return false if there is no valid
7699 * cli/cli-cmds.c (init_cli_cmds): Don't mark commands as
7700 "no_selected_thread_ok".
7701 * cli/cli-decode.c (set_cmd_no_selected_thread_ok)
7702 (get_cmd_no_selected_thread_ok): Delete.
7703 * cli/cli-decode.h (CMD_NO_SELECTED_THREAD_OK): Delete.
7704 (set_cmd_no_selected_thread_ok, get_cmd_no_selected_thread_ok):
7706 * stack.c (get_selected_block): Use has_stack_frames.
7708 2009-03-25 Thiago Jung Bauermann <bauerman@br.ibm.com>
7710 Fix size of FPSCR in Power 7 processors.
7711 * ppc-linux-nat.c (PPC_FEATURE_ARCH_2_05): Remove #define.
7712 (PPC_FEATURE_HAS_DFP): New #define.
7713 (ppc_linux_read_description): Check for DFP feature instead of
7714 ISA 2.05 to decide on size of the FPSCR.
7716 2009-03-25 Kevin Buettner <kevinb@redhat.com>
7718 * mn10300-tdep.c (trad-frame.h): Don't include.
7719 (prologue-value.h): Include.
7720 (mn10300_frame_unwind_cache, set_reg_offsets): Delete.
7721 (struct mn10300_prologue): Define.
7722 (push_reg, translate_rreg, check_for_saved): New functions.
7723 (mn10300_analyze_prologue): Rewrite, using prologue-value
7724 machinery. Handle more instructions than before. Permit
7725 instructions to occur in any order.
7726 (mn10300_skip_prologue): Find the extents of the function
7727 in question; mn10300_analyze_prologue no longer does this.
7728 (mn10300_analyze_frame_prologue): New function.
7729 (mn10300_frame_base): New function.
7730 (mn10300_frame_this_id): Rewrite, no longer using trad-frame
7732 (mn10300_frame_prev_register): Likewise.
7733 (mn10300_frame_base_address, mn10300_frame_base struct): Delete.
7734 (mn10300_unwind_pc, mn10300_unwind_sp): Rename `next_frame' to
7736 (mn10300_frame_unwind_init): Don't call frame_base_set_default().
7738 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
7740 Fix completer problem for filename completion on the first try.
7742 * gdb/completer.h (gdb_completion_word_break_characters): New function.
7743 * gdb/completer.c: Include gdb_assert.h.
7744 (complete_line_internal_reason): New enum.
7745 (complete_line_internal): Change last argument type to
7746 complete_line_internal_reason.
7747 Modify function to handle the different complete_line_internal_reason
7749 (complete_line): Adapt to change in complete_line_internal.
7750 (command_completer): Ditto.
7751 (gdb_completion_word_break_characters): Implement new function.
7752 * top.c (init_main): Set rl_completion_word_break_hook to
7753 gdb_completion_word_break_characters.
7756 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
7758 ARI fix: "strlen d_name" rule.
7759 * linux-nat.c (linux_nat_xfer_osdata): Use NAMELEN macro.
7762 2009-03-24 Tom Tromey <tromey@redhat.com>
7763 Pedro Alves <pedro@codesourcery.com>
7765 * configure, config.in: Rebuild.
7766 * configure.ac: Check for libiconvlist.
7767 * charset.c: Check HAVE_LIBICONVLIST.
7768 * acinclude.m4 (AM_ICONV): Don't subst LIBICONV, LIBICONV_INCLUDE,
7769 LIBICONV_LIBDIR. Update CPPFLAGS and LIBS.
7770 * Makefile.in (LIBICONV, LIBICONV_INCLUDE, LIBICONV_LIBDIR):
7772 (INTERNAL_CFLAGS_BASE): Update.
7773 (INTERNAL_LDFLAGS): Update.
7776 2009-03-24 Jan Kratochvil <jan.kratochvil@redhat.com>
7778 * configure.ac: Initialize the variable $PREFER_CURSES.
7779 * configure: Regenerated.
7781 2009-03-24 Jan Kratochvil <jan.kratochvil@redhat.com>
7783 * configure.ac: Enable $PREFER_CURSES even with default $ENABLE_TUI.
7784 * configure: Regenerated.
7786 2009-03-24 Pierre Muller <muller@ics.u-strasbg.fr>
7788 ARI fix: "strerror" rule.
7789 * darwin-nat.c (darwin_ptrace): Use safe_strerror.
7790 (darwin_stop_inferior, darwin_attach, darwin_detach): Ditto.
7792 2009-03-23 Joel Brobecker <brobecker@adacore.com>
7794 * ada-exp.y (get_symbol_field_type): Make sure to resolve typedefs
7795 before looking up the fields inside our struct type.
7797 2009-03-23 Joel Brobecker <brobecker@adacore.com>
7799 * ada-lang.c (resolve_subexp) [UNOP_QUAL]: Resolve typedefs before
7800 trying to resolve the type qualification.
7802 2009-03-23 Joel Brobecker <brobecker@adacore.com>
7804 * ada-lang.c (ada_evaluate_subexp) [UNOP_IN_RANGE]: make sure
7805 we try to apply the attribute on the real type, rather than
7806 its associated typedef.
7808 2009-03-23 Joel Brobecker <brobecker@adacore.com>
7810 * ada-lang.c (ada_evaluate_subexp) [OP_ATR_MODULUS]: Use check_typdef
7811 to make sure we try to get the modulus of the actual type, not the
7814 2009-03-23 Joel Brobecker <brobecker@adacore.com>
7816 * ada-lang.c (ada_evaluate_subexp): [OP_ATR_FIRST, OP_ATR_LAST]
7817 [OP_ATR_LENGTH]: When using the attribute on a type, make sure
7818 to get the real type, not the associated typedef.
7820 2009-03-23 Joel Brobecker <brobecker@adacore.com>
7822 * ada-lang.c (ada_get_field_index): Add handling of the case
7823 when TYPE is a typedef of a struct.
7825 2009-03-23 Joel Brobecker <brobecker@adacore.com>
7827 Add gdb_usleep as a portable version of usleep based on gdb_select.
7828 * gdb_usleep.h, gdb_usleep.c: New files.
7829 * Makefile.in (SFILES): Add gdb_usleep.c.
7830 (HFILES_NO_SRCDIR): Add gdb_usleep.h.
7831 (COMMON_OBS): Add gdb_usleep.o.
7832 * ser-unix.c (hardwire_send_break): Replace call to gdb_select
7833 by call to gdb_usleep.
7835 2009-03-23 Joel Brobecker <brobecker@adacore.com>
7837 * buildsym.c (end_symtab): If we ignore the subfiles, then
7838 unlink the associated symtabs if they were already allocated.
7840 2009-03-23 Jerome Guitton <guitton@adacore.com>
7842 Provide a way to force building of GDB with libcurses.
7843 * configure.ac: Add --with-curses.
7844 * configure: Regenerated.
7846 2009-03-23 Tom Tromey <tromey@redhat.com>
7848 * dwarf2expr.c (execute_stack_op) <DW_OP_GNU_uninit>: Fix typo in
7851 2009-03-23 Paul Pluzhnikov <ppluzhnikov@google.com>
7853 * breakpoint.c (disable_breakpoints_in_unloaded_shlib): Use
7854 solib_contains_address_p instead of searching.
7856 2009-03-23 Tom Tromey <tromey@redhat.com>
7858 * charset.c (ICONV_CONST) <PHONY_ICONV>: Define.
7859 (iconv): Make 'inbuf' argument const.
7860 (convert_between_encodings): Use ICONV_CONST.
7861 (wchar_iterate): Likewise.
7863 2009-03-22 Christopher Faylor <me+cygwin@cgf.cx>
7865 * windows-nat.c (AdjustTokenPrivileges): Implement macro wraparound for
7866 dynamically loaded function.
7867 (LookupPrivilegeValueA): Ditto.
7868 (OpenProcessToken): Ditto.
7869 (AdjustTokenPrivileges): Rename and define placeholder for address of
7870 dynamically loaded function.
7871 (LookupPrivilegeValueA): Ditto.
7872 (OpenProcessToken): Ditto.
7873 (set_process_privilege): Remove check for loaded functions.
7874 (bad_OpenProcessToken): Define.
7875 (_initialize_loadable): Load token functions from advapi here, setting
7876 OpenProcessToken function to a dummy static function which always return
7877 error if OS doesn't support this functionality.
7879 2009-03-22 Nicolas Roche <roche@adacore.com>
7880 Christopher Faylor <me+cygwin@cgf.cx>
7882 * win32-nat.c (ctrl_c_handler): New function.
7883 (win32_wait): Register ctrl_c_handler as Ctrl-C handler if the inferior
7884 is run in a separate console.
7886 2009-03-22 Christopher Faylor <me+cygwin@cgf.cx>
7888 * windows-nat.c (DebugActiveProcessStop): Implement macro wraparound
7889 for dynamically loaded function.
7890 (DebugBreakProcess): Ditto.
7891 (DebugSetProcessKillOnExit): Ditto.
7892 (EnumProcessModules): Ditto.
7893 (GetModuleFileNameExA): Ditto.
7894 (GetModuleInformation): Ditto.
7895 (DebugActiveProcessStop): Rename and define placeholder for address of
7896 dynamically loaded function.
7897 (DebugBreakProcess): Ditto.
7898 (DebugSetProcessKillOnExit): Ditto.
7899 (EnumProcessModules): Ditto.
7900 (GetModuleFileNameExA): Ditto.
7901 (GetModuleInformation): Ditto.
7902 (psapi_loaded): Delete.
7903 (get_module_name): Don't check psapi_loaded, just rely on the fact that
7904 dynamically loaded functions will return failure if they weren't
7906 (has_detach_ability): Delete.
7907 (windows_attach): Remove call to has_detach_ability (). Just rely on
7908 functions being callable.
7909 (bad_DebugActiveProcessStop): Define.
7910 (bad_DebugBreakProcess): Ditto.
7911 (bad_DebugSetProcessKillOnExit): Ditto.
7912 (bad_EnumProcessModules): Ditto.
7913 (bad_GetModuleFileNameExA): Ditto.
7914 (bad_GetModuleInformation): Ditto.
7915 (_initialize_loadable): Rename from _initialize_psapi. Initialize all
7916 dynamic storage here, setting nonexistent functions to dummy static
7917 functions which always return error.
7919 2009-03-22 Pedro Alves <pedro@codesourcery.com>
7921 * mi/mi-interp.c (mi_interpreter_init): Attach mi_about_to_proceed
7922 to the about_to_proceed observer notification.
7923 (mi_about_to_proceed): New.
7924 (mi_on_resume): Only output ^running and the prompt here if the
7925 target was proceeded.
7926 * breakpoint.c (breakpoint_proceeded): New static.
7927 (breakpoint_about_to_proceed): New.
7928 (_initialize_breakpoints): Attach breakpoint_about_to_proceed to
7929 the about_to_proceed observer notification.
7930 * inferior.h (breakpoint_proceeded): Delete declaration.
7931 * infrun.c (clear_proceed_status): Don't set breakpoint_proceeded.
7932 Notify the about_to_proceed observers.
7933 (struct inferior_status): Delete breakpoint_proceeded member.
7934 (save_inferior_status): Don't save it.
7935 (restore_inferior_status): Don't restore it.
7936 * mi-main.h (mi_proceeded): Declare.
7937 * mi/mi-main.c (mi_cmd_execute): Clear mi_proceeded before running
7940 2009-03-22 Pedro Alves <pedro@codesourcery.com>
7942 * gdbthread.h (struct thread_info): Add in_infcall member.
7943 * infcall.c (run_inferior_call): Save, set and restore in_infcall.
7944 Remove reverences to suppress_resume_observer. Refresh
7945 `call_thread' after returning from `proceed'.
7946 * infcmd.c (suppress_resume_observer): Delete.
7947 * inferior.h (suppress_resume_observer): Delete declaration.
7948 * mi/mi-interp.c (mi_on_resume): Suppress output while calling an
7950 * thread.c (set_running): Remove references to
7951 suppress_resume_observer.
7952 * infrun.c (struct inferior_status): Add in_infcall member.
7953 (save_inferior_status): Save it.
7954 (restore_inferior_status): Restore it.
7956 2009-03-22 Pedro Alves <pedro@codesourcery.com>
7958 * infcall.c (run_inferior_call): Remove references to
7959 suppress_stop_observer.
7960 * infcmd.c (suppress_stop_observer): Delete.
7961 (finish_command_continuation): Remove NOTE. Don't clear
7962 suppress_stop_observer anymore.
7963 (finish_command_continuation_free_arg): Likewise.
7964 (finish_forward): Remove references to suppress_stop_observer.
7965 Call normal_stop observer if we haven't already.
7966 * inferior.h (suppress_stop_observer): Delete.
7967 * infrun.c (normal_stop): When deciding to suppress the
7968 normal_stop observer, check for proceed_to_finish instead of
7969 suppress_stop_observer.
7971 2009-03-22 Pedro Alves <pedro@codesourcery.com>
7973 * symfile.c (symfile_relocate_debug_section): Remove check for
7976 2009-03-21 Jan Kratochvil <jan.kratochvil@redhat.com>
7977 Jim Blandy <jimb@red-bean.com>
7978 Thiago Jung Bauermann <bauerman@br.ibm.com>
7979 Tom Tromey <tromey@redhat.com>
7981 Miscellaneous fixes to the Python code.
7982 * python/python-cmd.c (cmdpy_init): Accept keyword
7984 * python/python-value.c (valpy_string): Accept keyword
7986 (valpy_binop): Use `break' to exit from the TRY_CATCH block.
7987 Do not call value_to_value_object on NULL RES_VAL.
7988 (value_object_methods): Change `string' entry to also accept
7990 (convert_value_from_python): Return a copy of the value if obj is
7992 (value_object_methods): Mark the `string' method as accepting
7993 keywords, and show method "prototype" in the doc string.
7994 * python/python.c (get_parameter): Don't return inside a
7997 2009-03-20 Tom Tromey <tromey@redhat.com>
7999 Add support for convenience functions in Python.
8000 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-function.o.
8001 (SUBDIR_PYTHON_SRCS): Add python-function.c.
8002 (python-function.o): New target.
8003 * eval.c: Include "python/python.h" and <ctype.h>.
8004 (evaluate_subexp_standard): Handle values of type
8005 TYPE_CODE_INTERNAL_FUNCTION.
8006 * gdbtypes.h (type_code): Add TYPE_CODE_INTERNAL_FUNCTION.
8007 * parse.c (write_exp_string): Remove duplicate word in comment.
8008 * python/python-function.c: New file.
8009 * python/python-internal.h (gdbpy_initialize_functions): Add
8011 * python/python.c (_initialize_python): Call
8012 gdbpy_initialize_functions.
8013 * valprint.c (value_check_printable): Handle values of type
8014 TYPE_CODE_INTERNAL_FUNCTION.
8015 * value.c: Include "cli/cli-decode.h".
8016 (internal_function): New struct.
8017 (functionlist, internal_fn_type): New static variables.
8018 (lookup_only_internalvar,
8019 lookup_internalvar): Add const qualifier to name argument.
8020 (create_internalvar): Likewise. Initialize new field.
8021 (set_internal_var): Fix typo in comment. Don't allow assignment
8022 to canonical variable.
8023 (value_create_internal_function, value_internal_function_name,
8024 call_internal_function, function_command, function_destroyer,
8025 add_internal_function): New functions.
8026 (_initialize_values): Create `function' placeholder command.
8027 Initialize internal_fn_type.
8028 * value.h (lookup_only_internalvar, create_internalvar,
8029 lookup_internalvar): Add const qualifier to name argument.
8030 (internal_function_fn, add_internal_function, call_internal_function,
8031 value_internal_function_name): Add prototypes.
8032 (struct internalvar) <canonical>: New field.
8034 2009-03-20 Tom Tromey <tromey@redhat.com>
8036 * c-lang.c (evaluate_subexp_c): Call check_typedef.
8038 2009-03-20 Tom Tromey <tromey@redhat.com>
8039 Julian Brown <julian@codesourcery.com>
8041 PR i18n/7220, PR i18n/7821, PR exp/8815, PR exp/9103,
8042 PR i18n/9401, PR exp/9613:
8044 * value.h (value_typed_string): Declare.
8045 (val_print_string): Update.
8046 * valprint.h (print_char_chars): Update.
8047 * valprint.c (print_char_chars): Add type argument. Update.
8048 (val_print_string): Likewise.
8049 * valops.c (value_typed_string): New function.
8050 * utils.c (host_char_to_target): New function.
8051 (parse_escape): Use host_char_to_target, host_hex_value. Update.
8053 (no_control_char_error): Remove.
8054 * typeprint.c (print_type_scalar): Update.
8055 * scm-valprint.c (scm_scmval_print): Update.
8056 * scm-lang.h (scm_printchar, scm_printstr): Update.
8057 * scm-lang.c (scm_printchar): Add type argument.
8058 (scm_printstr): Likewise.
8059 * printcmd.c (print_formatted): Update.
8060 (print_scalar_formatted): Update.
8061 (printf_command) <wide_string_arg, wide_char_arg>: New constants.
8062 Handle '%lc' and '%ls'.
8063 * parser-defs.h (struct typed_stoken): New type.
8064 (struct stoken_vector): Likewise.
8065 (write_exp_string_vector): Declare.
8066 * parse.c (write_exp_string_vector): New function.
8067 * p-valprint.c (pascal_val_print): Update.
8068 * p-lang.h (is_pascal_string_type, pascal_printchar,
8069 pascal_printstr): Update.
8070 * p-lang.c (is_pascal_string_type): Remove 'char_size' argument.
8071 Add 'char_type' argument.
8072 (pascal_emit_char): Add type argument.
8073 (pascal_printchar): Likewise.
8074 (pascal_printstr): Likewise.
8075 * objc-lang.c (objc_emit_char): Add type argument.
8076 (objc_printchar): Likewise.
8077 (objc_printstr): Likewise.
8078 * macroexp.c (get_character_constant): Handle unicode characters.
8080 (get_string_literal): Handle unicode strings. Use
8082 * m2-valprint.c (print_unpacked_pointer): Update.
8083 (m2_print_array_contents): Update.
8084 (m2_val_print): Update.
8085 * m2-lang.c (m2_emit_char): Add type argument.
8086 (m2_printchar): Likewise.
8087 (m2_printstr): Likewise.
8088 * language.h (struct language_defn) <la_printchar>: Add type
8090 <la_printstr, la_emitchar>: Likewise.
8091 (LA_PRINT_CHAR): Likewise.
8092 (LA_PRINT_STRING): Likewise.
8093 (LA_EMIT_CHAR): Likewise.
8094 * language.c (unk_lang_emit_char): Add type argument.
8095 (unk_lang_printchar): Likewise.
8096 (unk_lang_printstr): Likewise.
8097 * jv-valprint.c (java_val_print): Update.
8098 * jv-lang.c (java_emit_char): Add type argument.
8099 * f-valprint.c (f_val_print): Update.
8100 * f-lang.c (f_emit_char): Add type argument.
8101 (f_printchar): Likewise.
8102 (f_printstr): Likewise.
8103 * expprint.c (print_subexp_standard): Update.
8104 * charset.h (target_wide_charset): Declare.
8105 (c_target_char_has_backslash_escape, c_parse_backslash,
8106 host_char_print_literally, host_char_to_target,
8107 target_char_to_host, target_char_to_control_char): Remove.
8108 (enum transliterations): New type.
8109 (convert_between_encodings): Declare.
8110 (HOST_ESCAPE_CHAR): New define.
8111 (host_letter_to_control_character, host_hex_value): Declare.
8112 (enum wchar_iterate_result): New enum.
8113 (struct wchar_iterator): Declare.
8114 (make_wchar_iterator, make_cleanup_wchar_iterator, wchar_iterator,
8115 wchar_push_back): Declare.
8116 * charset-list.h: New file.
8117 * c-valprint.c (textual_name): New function.
8118 (textual_element_type): Handle wide character types.
8119 (c_val_print): Pass original type to textual_element_type. Handle
8120 wide character types.
8121 (c_value_print): Use textual_element_type. Pass original type of
8123 * c-lang.h (enum c_string_type): New type.
8124 (c_printchar, c_printstr): Update.
8125 * c-lang.c (classify_type): New function.
8126 (print_wchar): Likewise.
8127 (c_emit_char): Add type argument. Handle wide characters.
8128 (c_printchar): Likewise.
8129 (c_printstr): Add type argument. Handle wide and multibyte
8131 (convert_ucn): New function.
8132 (emit_numeric_character): Likewise.
8133 (convert_octal): Likewise.
8134 (convert_hex): Likewise.
8135 (ADVANCE): New macro.
8136 (convert_escape): New function.
8137 (parse_one_string): Likewise.
8138 (evaluate_subexp_c): Likewise.
8139 (exp_descriptor_c): New global.
8140 (c_language_defn): Use exp_descriptor_c.
8141 (cplus_language_defn): Likewise.
8142 (asm_language_defn): Likewise.
8143 (minimal_language_defn): Likewise.
8144 (charset_for_string_type): New function.
8145 * c-exp.y (%union): Add 'svec' and 'tsval'.
8147 (exp): Add CHAR production.
8148 (string_exp): Rewrite.
8149 (exp) <string_exp>: Rewrite.
8150 (tempbuf): Now global.
8151 (tempbuf_init): New global.
8152 (parse_string_or_char): New function.
8153 (yylex) <tempbuf>: Now global.
8154 <tokptr, tempbufindex, tempbufsize, token_string, class_prefix>:
8156 Handle 'u', 'U', and 'L' prefixes. Call parse_string_or_char.
8157 (c_parse_escape): New function.
8158 * auxv.c (fprint_target_auxv): Update.
8159 * ada-valprint.c (ada_emit_char): Add type argument.
8160 (ada_printchar): Likewise.
8161 (ada_print_scalar): Update.
8162 (printstr): Add type argument. Update calls to ada_emit_char.
8163 (ada_printstr): Add type argument.
8164 (ada_val_print_array): Update.
8165 (ada_val_print_1): Likewise.
8166 * ada-lang.c (emit_char): Add type argument.
8167 * ada-lang.h (ada_emit_char, ada_printchar, ada_printstr): Add
8169 * gdb_locale.h: Include langinfo.h.
8170 * charset.c (_initialize_charset): Set default host charset from
8171 the locale. Don't register charsets. Add target-wide-charset
8172 commands. Call find_charset_names.
8173 (struct charset, struct translation): Remove.
8174 (GDB_DEFAULT_HOST_CHARSET): Remove.
8175 (GDB_DEFAULT_TARGET_WIDE_CHARSET): New define.
8176 (target_wide_charset_name): New global.
8177 (show_host_charset_name): Handle "auto".
8178 (show_target_wide_charset_name): New function.
8179 (host_charset_enum, target_charset_enum): Remove.
8180 (charset_enum): New global.
8181 (all_charsets, register_charset, lookup_charset, all_translations,
8182 register_translation, lookup_translation): Remove.
8183 (simple_charset, ascii_print_literally, ascii_to_control): Remove.
8184 (iso_8859_print_literally, iso_8859_to_control,
8185 iso_8859_family_charset): Remove.
8186 (ebcdic_print_literally, ebcdic_to_control,
8187 ebcdic_family_charset): Remove.
8188 (struct cached_iconv, check_iconv_cache, cached_iconv_convert,
8189 register_iconv_charsets): Remove.
8190 (target_wide_charset_be_name, target_wide_charset_le_name): New
8192 (identity_either_char_to_other): Remove.
8193 (set_be_le_names, validate): New functions.
8194 (backslashable, backslashed, represented): Remove.
8195 (default_c_target_char_has_backslash_escape): Remove.
8196 (default_c_parse_backslash, iconv_convert): Remove.
8197 (ascii_to_iso_8859_1_table, ascii_to_ebcdic_us_table,
8198 ascii_to_ibm1047_table, iso_8859_1_to_ascii_table,
8199 iso_8859_1_to_ebcdic_us_table, iso_8859_1_to_ibm1047_table,
8200 ebcdic_us_to_ascii_table, ebcdic_us_to_iso_8859_1_table,
8201 ebcdic_us_to_ibm1047_table, ibm1047_to_ascii_table,
8202 ibm1047_to_iso_8859_1_table, ibm1047_to_ebcdic_us_table): Remove.
8203 (table_convert_char, table_translation, simple_table_translation):
8205 (current_host_charset, current_target_charset,
8206 c_target_char_has_backslash_escape_func,
8207 c_target_char_has_backslash_escape_baton): Remove.
8208 (c_parse_backslash_func, c_parse_backslash_baton): Remove.
8209 (host_char_to_target_func, host_char_to_target_baton): Remove.
8210 (target_char_to_host_func, target_char_to_host_baton): Remove.
8211 (cached_iconv_host_to_target, cached_iconv_target_to_host):
8213 (lookup_charset_or_error, check_valid_host_charset): Remove.
8214 (set_host_and_target_charsets): Remove.
8215 (set_host_charset, set_target_charset): Remove.
8216 (set_host_charset_sfunc, set_target_charset_sfunc): Rewrite.
8217 (set_target_wide_charset_sfunc): New function.
8218 (show_charset): Print target wide character set.
8219 (host_charset, target_charset): Rewrite.
8220 (target_wide_charset): New function.
8221 (c_target_char_has_backslash_escape): Remove.
8222 (c_parse_backslash): Remove.
8223 (host_letter_to_control_character): New function.
8224 (host_char_print_literally): Remove.
8225 (host_hex_value): New function.
8226 (target_char_to_control_char): Remove.
8227 (cleanup_iconv): New function.
8228 (convert_between_encodings): New function.
8229 (target_char_to_host): Remove.
8230 (struct wchar_iterator): Define.
8231 (make_wchar_iterator, make_cleanup_wchar_iterator, wchar_iterator,
8232 wchar_push_back): New functions.
8233 (do_cleanup_iterator): New function.
8234 (char_ptr): New typedef.
8235 (charsets): New global.
8236 (add_one, find_charset_names): New functions.
8237 (default_charset_names): New global.
8238 (auto_host_charset_name): Likewise.
8239 * aclocal.m4, config.in, configure: Rebuild.
8240 * configure.ac: Call AM_LANGINFO_CODESET.
8241 (GDB_DEFAULT_HOST_CHARSET): Default to UTF-8.
8242 (AM_ICONV): Invoke earlier.
8243 * acinclude.m4: Include codeset.m4. Subst LIBICONV_INCLUDE and
8244 LIBICONV_LIBDIR. Check for libiconv in build tree.
8245 * Makefile.in (LIBICONV_LIBDIR, LIBICONV_INCLUDE): New macros.
8246 (INTERNAL_CFLAGS_BASE): Add LIBICONV_INCLUDE.
8247 (INTERNAL_LDFLAGS): Add LIBICONV_LIBDIR.
8248 * gdb_obstack.h (obstack_grow_wstr): New define.
8249 * gdb_wchar.h: New file.
8250 * defs.h: Include it.
8252 2009-03-20 Tom Tromey <tromey@redhat.com>
8253 Jan Kratochvil <jan.kratochvil@redhat.com>
8255 * dwarf2read.c (process_die): Handle DW_TAG_typedef.
8256 * eval.c (evaluate_subexp_standard) <OP_TYPE>: Strip a single
8258 * ada-lang.c (decode_packed_array_type): Call CHECK_TYPEDEF on the
8260 * ada-typeprint.c (print_array_type): Do the NULL check
8263 2009-03-19 Tom Tromey <tromey@redhat.com>
8265 * utils.c (do_obstack_free): New function.
8266 (make_cleanup_obstack_free): Likewise.
8267 * defs.h (make_cleanup_obstack_free): Declare.
8269 2009-03-18 Doug Evans <dje@google.com>
8271 * linux-nat.c (linux_nat_find_memory_regions): Result of PIDGET is an
8272 int, not a long long.
8273 (linux_nat_info_proc_cmd): Store pid in long instead of long long.
8275 * expprint.c (dump_raw_expression): Print note if non-NULL.
8277 * printcmd.c (display_uses_solib_p): Redo loop, scan element list
8280 2009-03-18 Nathan Sidwell <nathan@codesourcery.com>
8282 * Makefile.in: Update license to GPLv3.
8283 * ada-exp.y: Update license to GPLv3.
8284 * ada-lex.l: Update license to GPLv3.
8285 * c-exp.y: Update license to GPLv3.
8286 * cp-name-parser.y: Update license to GPLv3.
8287 * darwin-nat-info.c: Update license to GPLv3.
8288 * f-exp.y: Update license to GPLv3.
8289 * gdb_thread_db.h: Update license to GPLv3.
8290 * hppanbsd-nat.c: Update license to GPLv3.
8291 * hppanbsd-tdep.c: Update license to GPLv3.
8292 * hppaobsd-tdep.c: Update license to GPLv3.
8293 * jv-exp.y: Update license to GPLv3.
8294 * m2-exp.y: Update license to GPLv3.
8295 * objc-exp.y: Update license to GPLv3.
8296 * p-exp.y: Update license to GPLv3.
8297 * reply_mig_hack.awk: Update license to GPLv3.
8298 * reverse.c: Update license to GPLv3.
8299 * xtensa-xtregs.c: Update license to GPLv3.
8301 2009-03-18 Pedro Alves <pedro@codesourcery.com>
8303 * remote.c (remote_close): Don't call generic_mourn_inferior.
8304 (remote_mourn_1): Call generic_mourn_inferior after closing the
8307 2009-03-18 Pedro Alves <pedro@codesourcery.com>
8309 * remote.c (remote_start_remote): Add missing call to
8310 init_wait_for_inferior in non-stop mode.
8312 2009-03-18 Pedro Alves <pedro@codesourcery.com>
8314 * breakpoint.c (bpstat_should_step): Only consider software
8315 watchpoints that have a location.
8317 2009-03-17 Joel Brobecker <brobecker@adacore.com>
8319 Add a target_ops parameter to the to_kill method in struct target_ops.
8321 * target.h (struct target_ops): Add a "target_ops *" parameter to
8323 (target_kill): Remove macro. Add declaration.
8324 * target.c (debug_to_kill): Delete, no longer necessary.
8325 (target_kill): New function.
8326 (update_current_target): Stop inheriting the to_kill method.
8327 Do not de_fault it to no_process either.
8328 (setup_target_debug): Do not set current_target.to_kill.
8329 * gnu-nat.c, go32-nat.c, hpux-thread.c, inf-ptrace.c, inf-ttrace.c,
8330 linux-nat.c, monitor.c, nto-procfs.c, procfs.c, remote-m32r-sdi.c,
8331 remote-mips.c, remote-sim.c, remote.c, windows-nat.c: Update
8334 2009-03-17 Doug Evans <dje@google.com>
8336 * amd64-linux-nat.c (si_timerid,si_overrun): Provide definition for
8337 glibc 2.3.2 and earlier.
8339 2009-03-17 Joel Brobecker <brobecker@adacore.com>
8341 * frame.c (get_prev_frame_1): Do not perform the inner_frame
8342 sanity check if this_frame is not NORMAL.
8343 (frame_id_inner): Update the description of this function.
8345 2009-03-17 Hui Zhu <teawater@gmail.com>
8347 * stack.c: Change the introduce of "disassemble-next-line".
8349 2009-03-17 Pedro Alves <pedro@codesourcery.com>
8351 * mi/mi-main.h (mi_print_timing_maybe): Add strict prototype,
8354 2009-03-17 Hui Zhu <teawater@gmail.com>
8356 * stack.c: Include valprint.h.
8357 (disassemble_next_line): New enum.
8358 (show_disassemble_next_line): New function. Show the current
8359 value of disassemble-next-line.
8360 (gdb_disassembly_stub_args): New struct for argument passing
8361 between function do_gdb_disassembly and function
8362 gdb_disassembly_stub.
8363 (gdb_disassembly_stub): New function. Helper for
8365 (do_gdb_disassembly): New function. Use TRY_CATCH to catch
8366 the exception from the gdb_disassembly because it will be
8367 broken by filter sometime.
8368 (print_frame_info): If disassemble-next-line is set to auto
8369 or on and doesn't have the line debug messages for $pc,
8370 output the next instruction.
8371 If disassemble-next-line is set to on and there is line debug
8372 messages, output assembly codes for next line.
8373 (_initialize_stack): Make the "set disassemble-next-line"
8374 command an auto-boolean command. Change its class to
8375 class_stack. Place it in the top level set list. Extend help
8376 to describe the auto mode.
8378 2009-03-17 Pedro Alves <pedro@codesourcery.com>
8380 * infrun.c (normal_stop): Don't overwrite old_chain.
8382 2009-03-16 Joel Brobecker <brobecker@adacore.com>
8384 * remote-mips.c (mips_load): Replace call to regcache_set_valid_p,
8385 which is undefined, by call to regcache_invalidate, which should
8386 do what the original author wanted to do.
8388 2009-03-16 Joel Brobecker <brobecker@adacore.com>
8390 * remote-mips.c (mips_mourn_inferior): Add missing ops parameter.
8391 (mips_create_inferior): Likewise.
8393 2009-03-16 Joel Brobecker <brobecker@adacore.com>
8395 * go32-nat.c (go32_create_inferior): Add missing ops parameter.
8397 2009-03-16 Joel Brobecker <brobecker@adacore.com>
8399 * darwin-nat.c (darwin_resume): Fix a compiler warning when
8400 building on x86_64-darwin.
8402 2009-03-16 Tristan Gingold <gingold@adacore.com>
8404 * configure.tgt: Add handling for x86_64-darwin.
8406 2009-03-16 Jan Kratochvil <jan.kratochvil@redhat.com>
8408 * auxv.c (fprint_target_auxv): New TAG for AT_RANDOM.
8410 2009-03-15 Joel Brobecker <brobecker@adacore.com>
8412 * aix-thread.c (aix_thread_thread_alive, aix_thread_pid_to_str):
8413 Use the ops parameter to get to the target beneath, rather than
8414 using the current_target global. Using the current_target global
8415 was an unintended accident.
8417 2009-03-15 Joel Brobecker <brobecker@adacore.com>
8419 Fix an error happening while loading symbols from a core file
8422 * rs6000-nat.c (xcoff_relocate_symtab): Use target_has_execution
8423 to detect whether we're debugging a core file or not.
8425 2009-03-15 Joel Brobecker <brobecker@adacore.com>
8427 Modernize the aix-thread later by getting rid of the base_target
8428 global. This brings back to life the AIX port which was otherwise
8429 crashing all the time.
8431 * aix-thread.c (base_target): Delete.
8432 (pd_enable): Do not set base_target.
8433 (aix_thread_attach): Use find_target_beneath instead of base_target.
8434 (aix_thread_detach, aix_thread_resume, aix_thread_wait)
8435 (aix_thread_fetch_registers, aix_thread_store_registers),
8436 (aix_thread_xfer_partial, aix_thread_mourn_inferior)
8437 (aix_thread_thread_alive, aix_thread_pid_to_str): Likewise.
8438 (aix_thread_kill): Delete. Does not seem necessary.
8439 (init_aix_thread_ops): Do not set aix_thread_ops.to_kill.
8441 2009-03-15 Jan Kratochvil <jan.kratochvil@redhat.com>
8443 * stack.c (return_command <retval_exp>): New variables retval_expr
8444 and old_chain. Inline parse_and_eval to initialize retval_expr. Check
8445 RETVAL_EXPR for UNOP_CAST and set RETURN_TYPE to the RETURN_VALUE type
8446 if RETURN_TYPE is NULL.
8448 2009-03-14 Pedro Alves <pedro@codesourcery.com>
8450 * remote.c (PACKET_qAttached): New.
8451 (remote_query_attached): New.
8452 (remote_add_inferior): Add new `attached' argument. Handle it.
8453 (remote_notice_new_inferior, remote_start_remote): Adjust to pass
8454 -1 to remote_add_inferior in new parameter.
8455 (extended_remote_attach_1): Adjust to pass 1 to
8456 remote_add_inferior in the new parameter.
8457 (extended_remote_create_inferior_1): Adjust to pass 0 to
8458 remote_add_inferior in the new parameter.
8459 (_initialize_remote): Add "set/show remote query-attached-packet"
8462 2009-03-13 Tom Tromey <tromey@redhat.com>
8464 * symtab.c (lookup_symbol_in_language): Use a cleanup.
8466 2009-03-13 Doug Evans <dje@google.com>
8468 * exceptions.h: Clean up some comments on catch_exceptions usage.
8469 * exceptions.c: Ditto. Plus mark catch_errors as superseded by
8472 2009-02-17 Joel Brobecker <brobecker@adacore.com>
8474 The following patch helps getting rid of a warning inside solib-som.c.
8476 * source.c (source_full_path_of): Constify parameter filename.
8477 * defs.h (source_full_path_of): Update declaration accordingly.
8479 2009-03-12 Joel Brobecker <brobecker@adacore.com>
8481 * ada-lang.c (ada_evaluate_subexp): Merge case BINOP_REM and
8482 BINOP_MOD cases with the handling of case BINOP_DIV and BINOP_MUL.
8483 Remove useless op value checks when EVAL_AVOID_SIDE_EFFECTS.
8485 2009-03-12 Joel Brobecker <brobecker@adacore.com>
8487 * ada-lang.c (ada_evaluate_subexp) <BINOP_DIV>: make sure to
8488 promote the operands when noside is EVAL_AVOID_SIDE_EFFECTS.
8490 2009-03-12 Joel Brobecker <brobecker@adacore.com>
8492 * ada-tasks.c (ada_task_is_alive): Move up and make static.
8493 * ada-lang.h (ada_task_is_alive): Remove declaration.
8495 2009-03-12 Jerome Guitton <guitton@adacore.com>
8497 * ada-lang.c (ada_delta): Change the type of numerators and
8498 denominators to DOUBLEST, as they may not fit into a long.
8499 (scaling_factor): Ditto.
8501 2009-03-12 Jerome Guitton <guitton@adacore.com>
8503 * language.c (lang_bool_type): Set lai->bool_type_symbol to NULL.
8505 2009-03-12 Joel Brobecker <brobecker@adacore.com>
8507 * ada-lang.c (ada_evaluate_subexp) [OP_VAR_VALUE]: For tagged
8508 types, if we are unable to determine the actual symbol type
8509 from its tag, then use the static approximation instead.
8511 2009-03-12 Joel Brobecker <brobecker@adacore.com>
8513 Fix crash printing packed record with packed array.
8515 * ada-lang.c (ada_modulus_from_name): New function.
8516 (ada_modulus): In the case where the type length is bigger than
8517 the size of the type used to hold the bounds, try determining
8518 the modulus from the type name.
8519 (ada_value_primitive_packed_val): Fix bug in the computation of
8520 ntarg causing an out-of-buffer invalid access.
8522 2009-03-12 Joel Brobecker <brobecker@adacore.com>
8524 Fix segfault when printing short_integer'last.
8526 * ada-lang.c (ada_find_any_type): Search in the primitive types
8527 if a symbol could not be found.
8529 2009-03-12 Joel Brobecker <brobecker@adacore.com>
8531 * ada-tasks.c (task_states,long_task_states): Add new states
8532 Activating and Acceptor_Delay_Sleep. Update the description
8533 of state Acceptor_Sleep.
8535 2009-03-12 Jonas Maebe <jonas.maebe@elis.ugent.be> (obvious change)
8537 Fix a build failure on Darwin following some changes in
8538 the profile of some target_ops methods.
8540 * darwin-nat.c (darwin_kill_inferior): Add target_ops parameter
8542 (darwin_stop_inferior, darwin_detach): Likewise.
8544 2009-03-12 Vladimir Prus <vladimir@codesourcery.com>
8546 Include token in ^running notification for CLI commands.
8548 * mi/mi-main.c (mi_execute_command): Set current_token here.
8549 (mi_cmd_execute): Do not set current_token here.
8551 2009-03-12 Vladimir Prus <vladimir@codesourcery.com>
8555 * mi/mi-main.c (mi_print_timing_maybe): New.
8556 (captured_mi_execute_command): Simplify. Output timings to
8558 (mi_execute_async_cli_command): Do not print timings.
8559 * mi/mi-main.h (mi_print_timing_maybe): Declare.
8560 * mi/mi-interp.c (mi_on_normal_stop): Call mi_print_timing_maybe.
8562 2009-03-12 Jerome Guitton <guitton@adacore.com>
8564 * xcoffread.c (process_linenos): Check if the line in the
8565 include table refers to the main source file and, if so,
8566 add them to the main subfile.
8568 2009-03-12 Joel Brobecker <brobecker@adacore.com>
8570 Fix a build failure on AIX introduced after a change in the profile
8571 of some of the "methods" in the target_ops structure.
8572 * aix-thread.c: Add missing target_ops parameter throughout.
8574 Implement Ada task switching on AIX.
8575 * aix-thread.c (aix_thread_get_ada_task_ptid): New function.
8576 (init_aix_thread_ops): Set aix_thread_ops.to_get_ada_task_ptid.
8578 2009-03-11 Daniel Jacobowitz <dan@codesourcery.com>
8580 * breakpoint.c (bpstat_check_breakpoint_conditions): Use
8581 value_mark and value_free_to_mark.
8582 * objfiles.c (free_objfile): Call objfile_free_data before
8585 2009-03-10 Hui Zhu <teawater@gmail.com>
8587 * disasm.c (gdb_disassembly): Remove unused argument
8589 * disasm.h (gdb_disassembly): Ditto.
8590 * cli/cli-cmds.c (print_disassembly): Ditto.
8591 * mi/mi-cmd-disas.c (mi_cmd_disassemble): Ditto.
8593 2009-03-09 Paul Pluzhnikov <ppluzhnikov@google.com>
8595 * solib.c (solib_contains_address_p): New function.
8596 (solib_name_from_address): Use it.
8597 * printcmd.c (display_uses_solib_p): Use it.
8598 * solib.h (solib_contains_address_p): Declare it.
8600 2009-03-09 Jan Kratochvil <jan.kratochvil@redhat.com>
8602 * varobj.c (free_variable): Call value_free.
8604 2009-03-09 Jan Kratochvil <jan.kratochvil@redhat.com>
8607 * dwarf2read.c (dwarf_decode_macros): New variable `at_commandline'.
8608 Move the variable `macinfo_type' out of the loop. Create a new
8609 processing pass before the current one to pre-create `current_file'.
8610 New complaint on misplaced zero/non-zero definitions/includes.
8611 Skip first DW_MACINFO_start_file with `at_commandline' set.
8613 2008-03-09 Vladimir Prus <vladimir@codesourcery.com>
8615 * solib.c (reload_shared_libraries): Give
8616 inferior a chance to reset solib breakpoint.
8619 2009-03-08 Christopher Faylor <me+cygwin@cgf.cx>
8621 * windows-nat.c (dr): Redefine to use largest possible integer which
8623 (cygwin_set_dr): Avoid coercion.
8625 2009-03-08 Oswald Buddenhagen <oswald.buddenhagen@trolltech.de>
8627 * windows-nat.c (windows_create_inferior): Implement --tty handling on
8630 2009-03-06 Paul Pluzhnikov <ppluzhnikov@google.com>
8632 Rename solib_address to solib_name_from_address.
8633 * breakpoint.c (insert_bp_location, disable_breakpoints_in_shlibs)
8634 (disable_breakpoints_in_unloaded_shlib): Update.
8635 * printcmd.c (display_uses_solib_p): Likewise.
8636 * stack.c (print_frame): Likewise.
8640 2009-03-05 Paul Pluzhnikov <ppluzhnikov@google.com>
8642 * printcmd.c (do_one_display): Reparse exp_string.
8643 (display_uses_solib_p): New function.
8644 (clear_dangling_display_expressions): New function.
8645 (_initialize_printcmd): Add observer.
8646 * solib.c (no_shared_libraries): Swap order of calls to
8647 clear_solib and objfile_purge_solibs.
8649 2009-03-05 Joel Brobecker <brobecker@adacore.com>
8651 Implement the target-specific part of Ada tasking support
8654 * dec-thread.c (dec_thread_get_ada_task_ptid): New function.
8655 (init_dec_thread_ops): Set the to_get_ada_task_ptid method.
8657 2009-03-05 Joel Brobecker <brobecker@adacore.com>
8659 Get rid of the global "base_target" and use "find_target_beneath"
8660 to find the underlying target.
8661 * dec-thread.c (base_target): Delete.
8662 (enable_dec_thread): Remove assignement to base_target.
8663 (dec_thread_detach, dec_thread_wait, dec_thread_wait)
8664 (dec_thread_fetch_registers, dec_thread_store_registers)
8665 (dec_thread_mourn_inferior, dec_thread_pid_to_str):
8666 Update the function profile if necessary.
8667 Use find_target_beneath to call the same method but from
8668 the underlying target, removing the need for "base_target".
8670 * dec-thread.c (dec_thread_get_regsets, dec_thread_set_regsets):
8671 Fix a copy/paste error in a few debug traces...
8673 * solib-osf.c (init_so): Use a simpler method for computing
8674 the size of lm_info structure. This also gets rid of warning
8675 emitted by the compiler.
8677 2009-03-05 Pedro Alves <pedro@codesourcery.com>
8679 * breakpoint.c (check_duplicates_for): Skip permanent breakpoints
8680 duplicates of permanent breakpoints.
8682 2009-03-04 Pedro Alves <pedro@codesourcery.com>
8684 * inferior.h (notice_new_inferior): Declare.
8685 * infcmd.c (notice_new_inferior): New.
8686 * remote.c (remote_add_inferior, remote_add_thread): New.
8687 (notice_new_inferiors): Rename to...
8688 (remote_notice_new_inferior): ... this. Add RUNNING argument.
8689 Use remote_add_thread instead of add_thread, passing it the
8690 RUNNING argument. Add an inferior with remote_add_inferior. If
8691 we just learned about an inferior, call notice_new_inferior.
8692 (record_currthread): Adjust.
8693 (remote_threads_info): Adjust to use remote_notice_new_inferior.
8694 (remote_start_remote, extended_remote_attach_1): Use
8695 remote_add_inferior.
8696 (process_stop_reply): Adjust. Call remote_notice_new_inferior
8697 after handling expedited registers and watchpoint state.
8698 (extended_remote_create_inferior_1): Use remote_add_inferior.
8700 2009-03-04 Aleksandar Ristovski <aristovski@qnx.com>
8702 * infcmd.c (registers_info): Remove register number case.
8704 2009-03-03 Pedro Alves <pedro@codesourcery.com>
8706 * top.c (quit_target): Check for target_has_execution before
8707 killing or detaching from inferiors.
8709 2009-03-02 Joel Brobecker <brobecker@adacore.com>
8711 Remove some unused routines.
8713 * ada-lang.c (is_suppressed_name, ada_suppress_symbol_printing):
8715 * ada-lang.c (ada_task_list_iterator_ftype)
8716 (iterate_over_live_ada_tasks): Delete.
8717 * ada-tasks.c (ada_get_environment_task, iterate_over_live_ada_tasks):
8720 2009-03-01 Doug Evans <dje@google.com>
8722 * symtab.c: Remove trailing whitespace throughout the file.
8723 (expand_line_sal): Fix some typos and whitespace.
8725 * Makefile.in (clean): rm -f $(DEPDIR)/*.
8727 * Makefile.in (GDB_CFLAGS): Add -I$(srcdir)/common.
8728 (init.c): signals/ -> common/.
8729 (signals.o): Update.
8730 * target.h (target_signal_to_string,target_signal_to_string)
8731 (target_signal_from_name,target_signal_to_host_p)
8732 (target_signal_from_host,target_signal_to_host): Move to ...
8733 * common/gdb_signals.h: ... here. New file.
8734 * common/signals.c: Moved here from signals/signals.c.
8735 #include gdb_signals.h, remove #include of target.h in gdb case.
8736 (target_signal_from_command,default_target_signal_to_host)
8737 (default_target_signal_from_host): Move inside #ifndef GDBSERVER.
8739 Include thread ID in target_wait debugging output.
8740 * infrun.c (print_target_wait_results): New function.
8741 (wait_for_inferior,fetch_inferior_event): Call it.
8743 2009-02-27 Pedro Alves <pedro@codesourcery.com>
8745 * gdb_proc_service.h (struct ps_prochandle): Replace pid_t field
8746 with a ptid_t field.
8747 * linux-thread-db.c (thread_get_info_callback): Build the ptid
8748 using the pid stored in proc_handle.ptid.
8749 (thread_from_lwp, thread_db_attach_lwp, enable_thread_event)
8750 (check_for_thread_db, thread_db_detach, check_event)
8751 (thread_db_mourn_inferior, find_new_threads_callback)
8752 (thread_db_find_new_threads_1): Adjust.
8753 * proc-service.c (ps_xfer_memory, ps_lgetregs, ps_lsetregs)
8754 (ps_lgetfpregs, ps_lsetfpregs, ps_getpid): Adjust.
8756 2009-02-27 Phil Muldoon <pmuldoon@redhat.com>
8758 * valprint.c (read_string): Rework clean-up logic. Use
8759 free_current_contents to clean-up buffer.
8761 2009-02-27 Andreas Schwab <schwab@linux-m68k.org>
8763 * MAINTAINERS: Update e-mail address.
8765 2009-02-26 Phil Muldoon <pmuldoon@redhat.com>
8767 * python/python-utils.c (python_string_to_unicode): Always return
8769 (python_string_to_target_string): Decrement transient python
8771 (python_string_to_host_string): Likewise.
8773 2007-02-26 Pedro Alves <pedro@codesourcery.com>
8775 * mips-linux-nat.c (mips64_linux_fetch_registers): Pass `ops' to
8776 call to super_fetch_registers.
8777 (mips64_linux_store_registers): Pass `ops' to call to
8778 super_store_registers.
8780 2009-02-25 Doug Evans <dje@google.com>
8782 * breakpoint.c (insert_bp_location): Add \n to overlay breakpoint
8785 * breakpoint.c (disable_breakpoints_in_shlibs): Delete local
8786 disabled_shlib_breaks, unused.
8788 * printcmd.c (build_address_symbolic): Fix comment.
8790 2009-02-25 Hui Zhu <teawater@gmail.com>
8792 * cli/cli-script.c (define_command): Add _() to query.
8793 * gnu-nat.c (inf_validate_task_sc): Ditto.
8794 * infcmd.c (kill_if_already_running): Ditto.
8795 (jump_command): Ditto.
8796 (attach_command): Ditto.
8797 * inflow.c (kill_command): Ditto.
8798 * infrun.c (handle_command): Ditto.
8799 * maint.c (maintenance_dump_me): Ditto.
8800 * memattr.c (mem_delete_command): Ditto.
8801 * monitor.c (monitor_interrupt_query): Ditto.
8802 * nto-procfs.c (interrupt_query): Ditto.
8803 * printcmd.c (undisplay_command): Ditto.
8804 * remote-mips.c (mips_kill): Ditto.
8805 * remote.c (interrupt_query): Ditto.
8806 * solib-irix.c (irix_open_symbol_file_object): Ditto.
8807 * solib-osf.c (osf_open_symbol_file_object): Ditto.
8808 * solib-pa64.c (pa64_open_symbol_file_object): Ditto.
8809 * solib-som.c (som_open_symbol_file_object): Ditto.
8810 * solib-svr4.c (open_symbol_file_object): Ditto.
8811 * symfile.c (symbol_file_add_with_addrs_or_offsets): Ditto.
8812 * target.c (kill_or_be_killed): Ditto.
8813 * tracepoint.c (delete_trace_command): Ditto.
8814 * top.c (quit_confirm): Add _() to s that will be used
8817 2009-02-24 Pierre Muller <muller@ics.u-strasbg.fr>
8819 Fix windows-nat.c compilation failure.
8821 * windows-nat.c (windows_thread_alive): Fix forward declaration.
8822 (get_windows_debug_event): Add ops parameter to call to windows_resume.
8824 2009-02-23 Pedro Alves <pedro@codesourcery.com>
8826 * remote-sim.c (gdbsim_resume): Add target_ops* argument.
8828 2009-02-23 Jay Krell <jay.krell@cornell.edu> (tiny change)
8830 * symtab.c (find_line_symtab): Initialize exact to avoid
8833 2009-02-23 Pedro Alves <pedro@codesourcery.com>
8835 * i386-linux-nat.c (i386_linux_fetch_inferior_registers): Pass
8836 `ops' to recursive call.
8838 2009-02-23 Pedro Alves <pedro@codesourcery.com>
8840 * corelow.c (get_core_registers): Adjust.
8841 (core_file_thread_alive): Rename to...
8842 (core_thread_alive): ... this.
8843 (core_pid_to_str): Try gdbarch_core_pid_to_str first.
8844 (init_core_ops): Adjust.
8845 (coreops_suppress_target): Delete.
8846 (_initialize_corelow): Unconditionally add core_ops.
8847 * procfs.c: Include "inf-child.h".
8848 (procfs_ops): Delete.
8849 (init_procfs_ops): Delete. Reimplement as...
8850 (procfs_target): ... this, inheriting from inf-child.
8851 (procfs_attach, procfs_detach, procfs_fetch_registers): Adjust.
8852 (procfs_prepare_to_store): Delete.
8853 (procfs_store_registers, procfs_resume): Adjust.
8854 (procfs_open): Delete.
8855 (procfs_suppress_run): Delete.
8856 (procfs_can_run): Delete.
8857 (procfs_mourn_inferior): Adjust.
8858 (procfs_init_inferior): Add target_ops parameter. Adjust.
8859 (procfs_create_inferior): Don't pass procfs_init_inferior to
8860 fork_inferior. Instead call it after fork_inferior returns.
8861 (procfs_find_new_threads): Adjust.
8862 (_initialize_procfs): Adjust to use procfs_target instead of
8864 * sol-thread.c (orig_core_ops, sol_core_ops): Delete.
8865 (lwp_to_thread): Use target_thread_alive.
8866 (sol_thread_open): Delete.
8867 (sol_thread_attach): Delete.
8868 (sol_thread_detach, sol_thread_resume, sol_thread_wait)
8869 (sol_thread_fetch_registers, sol_thread_store_registers): Adjust
8870 to use find_target_beneath.
8871 (sol_thread_prepare_to_store, sol_thread_xfer_memory): Delete.
8872 (sol_thread_xfer_partial): Adjust to use find_target_beneath.
8873 (sol_thread_files_info, sol_thread_kill_inferior): Delete.
8874 (check_for_thread_db): New.
8875 (sol_thread_notice_signals, sol_thread_create_inferior): Delete.
8876 (sol_thread_new_objfile): Call check_for_thread_db.
8877 (sol_thread_mourn_inferior): Adjust to use find_target_beneath.
8878 (sol_thread_can_run): Delete.
8879 (sol_thread_alive): Adjust to use find_target_beneath.
8880 (sol_thread_stop): Delete.
8881 (rw_common): Use target_write_memory or target_read_memory.
8882 (ps_lgetregs, ps_lgetfpregs): Use target_fetch_registers.
8883 (ps_lsetregs, ps_lsetfpregs): Use target_store_registers.
8884 (solaris_pid_to_str): Remove check for libthread_db initialization
8886 (sol_find_new_threads): Remove check for libthread_db
8887 initialization failing, or for an invalid inferior_ptid. Adjust
8888 to use find_target_beneath.
8889 (sol_core_open, sol_core_close, sol_core_detach,
8890 sol_core_files_info, sol_find_memory_regions,
8891 sol_make_note_section, ignore): Delete.
8892 (init_sol_thread_ops): Make it a thread_stratum target. Remove
8893 unneeded callback settings.
8894 (init_sol_core_ops): Delete.
8895 (_initialize_sol_thread): No longer call init_sol_core_ops, set
8896 procfs_suppress_run, or hack with core_ops.
8898 * target.h (struct target_ops): Add a target_ops * parameter to
8899 to_resume, to_fetch_registers, to_store_registers, to_thread_alive
8900 and to_find_new_threads.
8901 (target_fetch_registers, target_store_registers)
8902 (target_thread_alive, target_find_new_threads): Redeclare as
8905 * target.c (update_current_target): Do not inherit or de_fault
8906 to_resume, to_fetch_registers, to_store_registers,
8907 to_thread_alive, to_find_new_threads.
8908 (target_resume): Adjust.
8909 (target_thread_alive, target_find_new_threads): New.
8910 (debug_to_resume, debug_to_fetch_registers): Delete.
8911 (target_fetch_registers): New.
8912 (debug_to_store_registers): Delete.
8913 (target_store_registers): New.
8914 (debug_to_thread_alive, debug_to_find_new_threads): Delete.
8915 (setup_target_debug): Adjust.
8917 * gdbcore.h (core_ops): Delete declaration.
8919 * inf-ptrace.c, linux-nat.c, remote.c, amd64-linux-nat.c,
8920 inf-child.c, linux-thread-db.c, bsd-uthread.c, inf-ttrace.c,
8921 i386-sol2-tdep.c, darwin-nat.c, gnu-nat.c, go32-nat.c,
8922 hpux-thread.c, i386-linux-nat.c, i386fbsd-nat.c, monitor.c,
8923 nto-procfs.c, remote-m32r-sdi.c, remote-mips.c, windows-nat.c,
8924 alphabsd-nat.c, amd64bsd-nat.c, arm-linux-nat.c, armnbsd-nat.c,
8925 bsd-kvm.c, hppa-hpux-nat.c, hppa-linux-nat.c, hppabsd-nat.c,
8926 hppanbsd-nat.c, i386-darwin-nat.c, i386bsd-nat.c,
8927 ia64-linux-nat.c, m32r-linux-nat.c, m68kbsd-nat.c,
8928 m68klinux-nat.c, m88kbsd-nat.c, mips-linux-nat.c,
8929 mips64obsd-nat.c, mipsnbsd-nat.c, ppc-linux-nat.c, ppcnbsd-nat.c,
8930 ppcobsd-nat.c, remote-sim.c, rs6000-nat.c, s390-nat.c,
8931 shnbsd-nat.c, sparc-nat.c, sparc-nat.h, spu-linux-nat.c,
8932 vaxbsd-nat.c, xtensa-linux-nat.c: Adjust to target_ops changes.
8934 * gdbarch.sh (core_pid_to_str): New gdbarch callback.
8935 * gdbarch.h, gdbarch.c: Regenerate.
8937 * sol2-tdep.c: Include "inferior.h".
8938 (sol2_core_pid_to_str): New.
8939 * sol2-tdep.h (sol2_core_pid_to_str): Declare.
8941 * amd64-sol2-tdep.c (amd64_sol2_init_abi): Set it.
8942 * sparc-sol2-tdep.c (sparc32_sol2_init_abi): Set it.
8943 * sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Set it.
8944 * i386-sol2-tdep.c (i386_sol2_init_abi): Set it.
8946 2009-02-22 Doug Evans <dje@google.com>
8948 * exec.c (exec_file_attach): Fix comment.
8950 2009-02-22 Pedro Alves <pedro@codesourcery.com>
8952 Silence a few -Wmissing-prototypes warnings.
8955 * alpha-linux-tdep.c (alpha_linux_regset_from_core_section): Make
8957 * alpha-osf1-tdep.c (_initialize_alpha_osf1_tdep): Declare.
8958 * amd64fbsd-tdep.c (amd64fbsd_init_abi): Make it static.
8959 * amd64nbsd-tdep.c (_initialize_amd64nbsd_ndep): Rename to ...
8960 (_initialize_amd64nbsd_tdep): ... this.
8961 * arm-linux-tdep.c (arm_linux_software_single_step): Make it static.
8962 (_initialize_arm_linux_tdep): Declare.
8963 * armbsd-tdep.c (armbsd_fpreg_offset): Make it static.
8964 * armnbsd-tdep.c (_initialize_arm_netbsd_tdep): Declare.
8965 * armobsd-tdep.c (_initialize_armobsd_tdep): Declare.
8966 * avr-tdep.c (avr_return_value): Make it static.
8967 (avr_frame_unwind_cache): Ditto.
8968 * bsd-uthread.c (bsd_uthread_inferior_created): Ditto.
8969 (bsd_uthread_solib_loaded): Ditto.
8970 (bsd_uthread_solib_unloaded): Ditto.
8971 (bsd_uthread_target): Ditto.
8972 (_initialize_bsd_uthread): Declare.
8973 * cris-tdep.c (crisv32_single_step_through_delay): Make it static.
8974 (cris_frame_unwind_cache): Ditto.
8975 * frv-tdep.c (frv_return_value): Ditto.
8976 * h8300-tdep.c (h8300_use_struct_convention): Ditto.
8977 (h8300h_use_struct_convention): Ditto.
8978 * hppa-tdep.c (hppa_sign_extend, hppa_low_hppa_sign_extend):
8980 * hppa-tdep.h (hppa_low_sign_extend, hppa_sign_extend): Delete
8982 * hppabsd-tdep.c: Include hppabsd-tdep.h.
8983 (hppabsd_find_global_pointer): Make it static.
8984 * hppabsd-tdep.h: New.
8985 * hppanbsd-tdep.c: Include hppabsd-tdep.h.
8986 (hppabsd_init_abi): Remove declaration.
8987 (_initialize_hppabsd_tdep): Remove declaration.
8988 (_initialize_hppanbsd_tdep): Declare.
8989 * hppaobsd-tdep.c: Include hppabsd-tdep.h.
8990 (hppabsd_init_abi): Delete declaration.
8991 (hppaobsd_init_abi): Make it static.
8992 * i386-nto-tdep.c (_initialize_i386nto_tdep): Declare.
8993 * i386nbsd-tdep.c (_initialize_i386nbsd_tdep): Declare.
8994 * ia64-linux-tdep.c (_initialize_ia64_linux_tdep): Declare.
8995 * ia64-tdep.c (ia64_register_reggroup_p): Make it static.
8996 * iq2000-tdep.c (_initialize_iq2000_tdep): Declare.
8997 * m32c-tdep.c (m32c_register_reggroup_p): Make it static.
8998 (m32c_analyze_prologue, m32c_virtual_frame_pointer): Ditto.
8999 (_initialize_m32c_tdep): Declare.
9000 * m32r-rom.c (_initialize_m32r_rom): Declare.
9001 * m32r-tdep.c (m32r_skip_prologue): Make it static.
9002 (m32r_return_value): Ditto.
9003 * m68hc11-tdep.c (m68hc11_frame_unwind_cache): Make it static.
9004 (m68hc11_return_value): Ditto.
9005 * m68klinux-tdep.c (_initialize_m68k_linux_tdep): Declare.
9006 * m88k-tdep.c (m88k_frame_cache): Make it static.
9007 * mep-tdep.c (mep_gdb_print_insn): Ditto.
9008 (mep_return_value): Ditto.
9009 (_initialize_mep_tdep): Declare.
9010 * mips-irix-tdep.c (_initialize_mips_irix_tdep): Declare.
9011 * mips-linux-tdep.c (supply_64bit_reg): Make it static.
9012 (mips_linux_syscall_next_pc): Ditto.
9013 (_initialize_mips_linux_tdep): Declare.
9014 * mips-tdep.c (mips_single_step_through_delay): Make it static.
9015 * mipsnbsd-tdep.c (_initialize_mipsnbsd_tdep): Declare.
9016 * mn10300-linux-tdep.c (_initialize_mn10300_linux_tdep): Declare.
9017 * mn10300-tdep.c (_initialize_mn10300_tdep): Declare.
9018 * mt-tdep.c (_initialize_mt_tdep): Declare.
9019 * nbsd-tdep.c: Include nbsd-tdep.h.
9020 * nto-tdep.c (find_load_phdr): Make it static.
9021 (_initialize_nto_tdep): Declare.
9022 * ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Make it
9024 (_initialize_ppc_linux_tdep): Declare.
9025 * remote-m32r-sdi.c (m32r_can_use_hw_watchpoint)
9026 (m32r_insert_watchpoint, m32r_remove_watchpoint)
9027 (m32r_stopped_data_address, m32r_stopped_by_watchpoint): Make
9029 * rs6000-aix-tdep.c (_initialize_rs6000_aix_tdep): Declare.
9030 * rs6000-nat.c: Include xcoffread.h.
9031 (find_toc_address): Don't extern declare get_toc_offset. Adjust
9032 to call xcoff_get_to_offset.
9033 * rs6000-tdep.c (ppc_vsx_support_p, ppc_displaced_step_fixup)
9034 (rs6000_skip_main_prologue, rs6000_in_solib_return_trampoline)
9035 (rs6000_skip_trampoline_code): Make static.
9036 * s390-tdep.c (s390_regset_from_core_section): Ditto.
9037 * sh-tdep.c (sh_register_reggroup_p): Ditto.
9038 * shnbsd-tdep.c (shnbsd_regset_from_core_section): Ditto.
9039 (_initialize_shnbsd_tdep): Declare.
9040 * solib-frv.c (displacement_from_map): Make static.
9041 (_initialize_frv_solib): Declare.
9042 * solib-irix.c (fetch_lm_info): Make static.
9043 (_initialize_irix_solib): Declare.
9044 * solib-som.c: Include solib-som.h.
9045 (som_solib_select): Line break.
9046 * sparc-tdep.c (sparc_regset_from_core_section): Make static.
9047 * sparcnbsd-tdep.c (_initialize_sparnbsd_tdep): Rename to ...
9048 (_initialize_sparcnbsd_tdep): ... this.
9049 * spu-tdep.c (spu_software_single_step): Make it static.
9050 (_initialize_spu_tdep): Declare.
9051 * vax-tdep.c (vax_frame_cache): Make it static.
9052 * xcoffread.c: Include xcoffread.h.
9053 (get_toc_offset): Rename to ...
9054 (xcoff_get_toc_offset): ... this.
9055 (_initialize_xcoffread): Declare.
9057 * xtensa-linux-tdep.c (_initialize_xtensa_linux_tdep): Declare.
9058 * xtensa-tdep.c (xtensa_skip_prologue, xtensa_derive_tdep): Make
9060 (_initialize_xtensa_tdep): Declare.
9062 2008-02-21 Pedro Alves <pedro@codesorcery.com>
9064 Silence a few -Wmissing-prototypes warnings.
9067 * amd64-nat.c: Include "amd64-nat.h".
9068 * fork-child.c (_initialize_fork_child): Ditto.
9069 * gcore.c (_initialize_gcore): Ditto.
9070 * inf-ptrace.c: Include "inf-ptrace.h".
9071 (inf_ptrace_store_registers): Make it static.
9072 * linux-nat.c (linux_nat_terminal_ours): Make it static.
9073 (_initialize_linux_nat): Declare before definition.
9074 * linux-tdep.c: Include "linux-tdep.h".
9075 * linux-thread-db.c (_initialize_thread_db): Declare before
9077 * proc-service.c (_initialize_proc_service): Ditto.
9078 * remote.c (remote_send_printf): Make it static.
9079 * solib.c: Include "solib.h".
9080 * symfile-mem.c (_initialize_symfile_mem): Declare before
9082 * ada-lang.c (ada_la_decode, ada_match_name)
9083 (ada_suppress_symbol_printing, ada_is_array_type)
9084 (ada_value_ptr_subscript, ada_array_length)
9085 (ada_to_static_fixed_value): Make them static.
9086 (_initialize_ada_language): Declare before definition.
9087 * ada-tasks.c (ada_get_task_number, ada_get_environment_task)
9088 (ada_task_list_changed, ada_new_objfile_observer): Make them
9090 (_initialize_tasks): Declare before definition.
9091 * addrmap.c (_initialize_addrmap): Declare before definition.
9092 * auxv.c (default_auxv_parse): Make it static.
9093 * bfd-target.c (target_bfd_xfer_partial, target_bfd_xclose): Make
9095 * breakpoint.c (remove_sal): Add line break.
9096 (expand_line_sal_maybe): Make it static.
9097 * cp-name-parser.y: Include "cp-support.h".
9098 * cp-valprint.c (cp_find_class_member): Make it static.
9099 * eval.c (value_f90_subarray): Ditto.
9100 * exceptions.c (print_any_exception): Ditto.
9101 * findcmd.c (_initialize_mem_search): Declare before definition.
9102 * frame.c (frame_observer_target_changed): Make it static.
9103 * gnu-v3-abi.c (gnuv3_find_method_in): Make it static.
9104 * inf-child.c: Include "inf-child.h".
9105 * inferior.h (valid_inferior_id): Rename to ...
9106 (valid_gdb_inferior_id): ... this.
9107 * infrun.c (infrun_thread_stop_requested, siginfo_make_value):
9109 * jv-lang.c (java_language_arch_info): Make it static.
9110 * m2-typeprint.c (m2_get_discrete_bounds): Ditto.
9111 * osdata.c (info_osdata_command): Make it static.
9112 * regcache.c (regcache_observer_target_changed): Make it static.
9113 * reverse.c (_initialize_reverse): Declare before definition.
9114 * stabsread.c (cleanup_undefined_types_noname)
9115 (cleanup_undefined_types_1): Make them static.
9116 * symfile.c (place_section): Make it static.
9117 * symtab.c (find_pc_sect_psymtab_closer): Make it static.
9118 * target-descriptions.c (_initialize_target_descriptions): Declare
9120 * target.c (default_get_ada_task_ptid, find_default_can_async_p)
9121 (find_default_is_async_p, find_default_supports_non_stop): Make
9123 (target_supports_non_stop): Add prototype.
9124 (dummy_pid_to_str): Make it static.
9125 * utils.c (_initialize_utils): Declare before definition.
9126 * ada-exp.y (_initialize_ada_exp): Declare before definition.
9127 * solib-svr4.c (HAS_LM_DYNAMIC_FROM_LINK_MAP): Add a prototype.
9128 * target.h (struct target_ops): Add a prototype to the
9129 to_can_execute_reverse callback.
9130 * macroscope.c (_initialize_macroscope): Declare before definition.
9131 * cp-namespace.c (_initialize_cp_namespace): Declare before definition.
9132 * python/python.c (_initialize_python): Declare before definition.
9133 * tui/tui-command.c: Include "tui/tui-command.h".
9134 * tui/tui-data.c (init_content_element, init_win_info): Make them
9136 * tui/tui-disasm.c: Include "tui/tui-disasm.h".
9137 * tui/tui-interp.c (_initialize_tui_interp): Declare before
9139 * tui/tui-layout.c: Include "tui/tui-layout.h".
9140 (_initialize_tui_layout): Declare before definition.
9141 * tui/tui-regs.c: Include "tui/tui-regs.h".
9142 (tui_display_reg_element_at_line): Make it static.
9143 (_initialize_tui_regs): Declare before definition.
9144 * tui/tui-stack.c (_initialize_tui_stack): Declare before
9146 * tui/tui-win.c: Include "tui/tui-win.h".
9147 (_initialize_tui_win): Declare before definition.
9148 (tui_sigwinch_handler): Make it static. Wrap in ifdef SIGWINCH.
9149 * tui/tui-win.h (tui_sigwinch_handler): Delete declaration.
9150 (tui_get_cmd_list): Add a prototype.
9151 * tui/tui-windata.c: Include tui-windata.h.
9152 * tui/tui-wingeneral.c (box_win): Make it static.
9153 * cli/cli-logging.c (show_logging_command): Make it static.
9154 (_initialize_cli_logging): Declare before definition.
9155 * mi/mi-common.c (_initialize_gdb_mi_common): Declare before
9158 2009-02-20 Pierre Muller <muller@ics.u-strasbg.fr>
9160 Extend use of i386_use_watchpoints to all i386 native files
9161 using hardware watchpoints.
9162 * go32-nat.c (init_go32_ops): Call i386_use_watchpoints.
9163 * i386fbsd-nat.c (_initialize_i386fbsd_nat): Ditto.
9164 * windows-nat.c (init_windows_ops): Ditto.
9165 * config/i386/nm-cygwin.h: Define I386_WATCHPOINTS_IN_TARGET_VECTOR.
9166 * config/i386/nm-cygwin64.h: Ditto.
9167 * config/i386/nm-fbsd.h: Ditto.
9168 * config/i386/nm-go32.h: Ditto.
9170 2009-02-19 Joel Brobecker <brobecker@adacore.com>
9172 * ada-typeprint.c (ada_typedef_print): Remove. Unused.
9174 2009-02-18 Vladimir Prus <vladimir@codesourcery.com>
9176 * mi/mi-interp.c (mi_solib_loaded, mi_solib_unloaded): New.
9177 (mi_interpreter_init): Register the above.
9178 * solib.c (clear_solib): Notify solib unload.
9179 * breakpoint.c (disable_breakpoints_in_unloaded_shlib): Do not
9180 disable breakpoints on a.out targets.
9182 2009-02-17 Vladimir Prus <vladimir@codesourcery.com>
9184 * observer.c (observer_test_first_notification_function)
9185 (observer_test_second_notification_function)
9186 (observer_test_third_notification_function): Adjust prototype.
9188 2009-02-17 Pedro Alves <pedro@codesourcery.com>
9190 * Makefile.in (ALL_64_TARGET_OBS): Add amd64-dicos-tdep.o.
9191 (ALL_TARGET_OBS): Add dicos-tdep.o.
9192 (ALLDEPFILES): Add amd64-dicos-tdep.c and dicos-tdep.c.
9193 * configure.tgt (i[34567]86-*-dicos*): Add dicos-tdep.o to
9195 (x86_64-*-dicos*): Add dicos-tdep.o and amd64-dicos-tdep.o to
9197 * dicos-tdep.h, dicos-tdep.c: New.
9198 * amd64-dicos-tdep.c: New.
9199 * i386-dicos-tdep.c: Don't include solib.h, solib-target.h or
9200 inferior.h. Include dicos-tdep.h.
9201 (i386_dicos_init_abi): Call dicos_init_abi.
9202 (i386_dicos_bfd_has_symbol_p): Delete.
9203 (i386_dicos_osabi_sniffer): Use dicos_load_module_p.
9205 * NEWS: Mention x86-64 DICOS target support.
9207 2009-02-16 Doug Evans <dje@google.com>
9209 * amd64-tdep.c (amd64_skip_prefixes): Renamed from skip_prefixes.
9210 All callers updated.
9211 (amd64_get_insn_details): Handle more 3-byte opcode insns.
9212 (amd64_breakpoint_p): Delete.
9213 (amd64_displaced_step_fixup): When fixing up after stepping an int3,
9214 don't back up pc to the start of the int3.
9215 * i386-tdep.c: #include opcode/i386.h.
9216 (i386_skip_prefixes): New function.
9217 (i386_absolute_jmp_p): Constify argument.
9218 (i386_absolute_call_p,i386_ret_p,i386_call_p,i386_syscall_p): Ditto.
9219 (i386_breakpoint_p): Delete.
9220 (i386_displaced_step_fixup): Handle unnecessary or redundant prefixes.
9221 When fixing up after stepping an int3, don't back up pc to the start
9224 2009-02-16 Pedro Alves <pedro@codesourcery.com>
9226 * corelow.c (core_close): Don't hardcode the core's pid.
9227 (core_open): Find core threads before calling
9228 post_create_inferior.
9229 (add_to_thread_list, get_core_register_section): Take into account
9230 systems where the regset section names encode the pid of the
9233 * gdbarch.sh (core_reg_section_encodes_pid): New gdbarch setting.
9234 * gdbarch.h, gdbarch.c: Regenerate.
9236 * amd64-sol2-tdep.c (amd64_sol2_init_abi): Set it.
9237 * i386-sol2-tdep.c (i386_sol2_init_abi): Set it.
9238 * sparc-sol2-tdep.c (sparc32_sol2_init_abi): Set it.
9239 * sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Set it.
9241 2009-02-14 Vladimir Prus <vladimir@codesourcery.com>
9243 Include frame information for *stopped due to CLI commands.
9245 * ada-tasks.c (ada_normal_stop_observer): Adjust prototype.
9246 * infcmd.c (finish_command_continuation): Pass '1' for
9247 'print_frame' parameter to the observer.
9248 * infrun.c (normal_stop): Don't print mi-specific information
9249 here. Pass 'stop_print_frame' to the 'print_frame' parameter
9251 * mi/mi-interp.c (mi_on_normal_stop): Adjust prototype.
9252 If we need to print frame, and current uiout is not the MI one,
9255 2009-02-13 Pierre Muller <muller@ics.u-strasbg.fr>
9257 * xtensa-tdep.c (call0_analyze_prologue): Delete BSZ macro.
9258 Replace BSZ macro uses by XTENSA_ISA_BSZ macro.
9260 2009-02-12 Jan Kratochvil <jan.kratochvil@redhat.com>
9263 * dwarf2read.c (process_die <DW_TAG_module>, read_module)
9264 (scan_partial_symbols <DW_TAG_module>, add_partial_module): New.
9266 2009-02-11 Pierre Muller <muller@ics.u-strasbg.fr>
9268 * dwarf2read.c (read_base_type): Set code to TYPE_CODE_CHAR
9269 for DW_ATE_signed_char and DW_ATE_unsigned_char
9270 for pascal language.
9272 2009-02-11 Jim Meyering <meyering@redhat.com>
9273 Jan Kratochvil <jan.kratochvil@redhat.com>
9275 Avoid NULL dereference.
9276 * stack.c (return_command): Guard use of SYMBOL_TYPE (thisfun).
9277 New variable func_type.
9279 2009-02-11 Pedro Alves <pedro@codesourcery.com>
9281 * gdbarch.c: Regenerate.
9283 2009-02-10 Pierre Muller <muller@ics.u-strasbg.fr>
9285 * p-lang.c (is_pascal_string_type): Fix comment.
9286 Determine exact size of char elements for GPC
9288 (pascal_printstr): Handle char width of 2 or 4.
9289 * p-valprint.c (pascal_val_print): Handle char
9292 2009-02-07 Daniel Jacobowitz <dan@codesourcery.com>
9294 * dwarf2read.c (dwarf2_build_psymtabs_hard): Move lowpc and highpc
9295 inside the loop. Only call addrmap_set_empty if the compilation unit
9296 had DW_AT_high_pc and DW_AT_low_pc. Update call to
9297 scan_partial_symbols.
9298 (scan_partial_symbols): Take NEED_PC argument and pass it along with
9300 (add_partial_namespace): Take NEED_PC argument and pass it through.
9301 (add_partial_subprogram): Take NEED_PC argument. Update the addrmap
9304 2009-02-07 Pedro Alves <pedro@codesourcery.com>
9306 * NEWS: Mention inspecting extra signal information, $_siginfo,
9307 and the qXfer:siginfo:read and qXfer:siginfo:write packets.
9309 2009-02-07 Pedro Alves <pedro@codesourcery.com>
9311 * linux-nat.c (PTRACE_SETSIGINFO): Define if PTRACE_GETSIGINFO
9314 2009-02-06 Pedro Alves <pedro@codesourcery.com>
9316 * amd64-linux-nat.c (compat_int_t, compat_uptr_t, compat_time_t)
9317 (compat_timer_t, compat_clock_t, struct compat_timeval)
9318 (compat_sigval_t, compat_siginfo_t): New types.
9319 (cpt_si_pid, cpt_si_uid, cpt_si_timerid, cpt_si_overrun)
9320 (cpt_si_status, cpt_si_utime, cpt_si_stime, cpt_si_ptr)
9321 (cpt_si_addr, cpt_si_band, cpt_si_fd): New defines.
9322 (compat_siginfo_from_siginfo, siginfo_from_compat_siginfo)
9323 (amd64_linux_siginfo_fixup): New.
9324 * linux-nat.c (linux_nat_siginfo_fixup): New.
9325 (siginfo_fixup): New.
9326 (linux_xfer_siginfo): Use siginfo_fixup to convert between the
9327 siginfo layout expected by ptrace and the siginfo layout of the
9329 (linux_nat_set_siginfo_fixup): New.
9330 * linux-nat.h (linux_nat_set_siginfo_fixup): Declare.
9332 2009-02-06 Pedro Alves <pedro@codesourcery.com>
9334 * target.h (enum target_object): Add new TARGET_OBJECT_SIGNAL_INFO.
9335 * infrun.c (siginfo_value_read, siginfo_value_write): New.
9336 (siginfo_value_funcs): New.
9337 (siginfo_make_value): New.
9338 (_initialize_infrun): Create the $_siginfo convenience variable.
9339 * gdbtypes.h (append_composite_type_field_aligned): Declare.
9340 * gdbtypes.c (append_composite_type_field): Rename to...
9341 (append_composite_type_field_aligned): ... this. Add ALIGNMENT
9342 argument. Handle it.
9343 (append_composite_type_field): Rewrite on top of
9344 append_composite_type_field_aligned.
9345 * value.h (internalvar_make_value): New typedef.
9346 (struct internalvar) <make_value>: New field.
9347 (create_internalvar_type_lazy): Declare.
9348 * value.c (create_internalvar): Clear make_value.
9349 (create_internalvar_type_lazy): New.
9350 (value_of_internalvar): If make_value is set use it.
9351 (preserve_values): Skip internal variables that don't have a
9353 * gdbarch.sh (get_siginfo_type): New.
9354 * gdbarch.h, gdbarch.c: Regenerate.
9356 * linux-tdep.h, linux-tdep.c: New.
9357 * amd64-linux-tdep.c: Include "linux-tdep.h".
9358 (amd64_linux_init_abi): Register linux_get_siginfo_type and
9359 linux_get_siginfo_mapper.
9360 * i386-linux-tdep.c: Include "linux-tdep.h".
9361 (i386_linux_init_abi): Register linux_get_siginfo_type and
9362 linux_get_siginfo_mapper.
9363 * arm-linux-tdep.c: Include "linux-tdep.h".
9364 (i386_linux_init_abi): Register linux_get_siginfo_type and
9365 linux_get_siginfo_mapper.
9367 * linux-nat.c (linux_xfer_siginfo): New.
9368 (linux_nat_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO.
9369 * remote.c (PACKET_qXfer_siginfo_read)
9370 (PACKET_qXfer_siginfo_write): New.
9371 (feature remote_protocol_features): Add "qXfer:siginfo:read" and
9372 "qXfer:siginfo:write" features.
9373 (remote_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO.
9374 (_initialize_remote): Add "set/show remote read-siginfo-object"
9375 and "set/show remote write-siginfo-object" commands.
9377 * Makefile.in (ALL_TARGET_OBS): Add linux-tdep.o.
9378 (HFILES_NO_SRCDIR): Add linux-tdep.h.
9379 (ALLDEPFILES): Add linux-tdep.c.
9381 * configure.tgt (arm*-*-linux* | arm*-*-uclinux*)
9382 (i[34567]86-*-linux*, x86_64-*-linux*): Add linux-tdep.o to
9385 2009-02-06 Jim Blandy <jimb@codesourcery.com>
9386 Daniel Jacobowitz <dan@codesourcery.com>
9387 Vladimir Prus <vladimir@codesourcery.com>
9388 Pedro Alves <pedro@codesourcery.com>
9390 * defs.h (enum lval_type): New value: lval_computed.
9391 * value.h (struct lval_funcs): New type.
9392 (allocate_computed_value, value_computed_funcs)
9393 (value_computed_closure): New declarations.
9394 * value.c (struct value): Add a structure to the location union
9395 for computed lvalues, containing 'funcs' and 'closure' members.
9396 (allocate_computed_value, value_computed_funcs)
9397 (value_computed_closure): New functions.
9398 (value_free): For computed lvalues, call the closure's
9399 'free_closure' function before freeing the value itself.
9400 (value_copy): If we're copying an lval_computed value, call the
9401 closure's 'copy_closure' function.
9402 (set_value_component_location): If the original value is a
9403 computed lvalue, then call the closure's 'copy_closure' function.
9404 (value_of_internalvar): If an internal variable's value is a
9405 computed lvalue, make retrieving its value produce an equivalent
9407 * valops.c (value_fetch_lazy): Unlazy computed lvalues by calling
9408 their read function.
9409 (value_assign): Assign to computed lvalues by calling their write
9412 2009-02-06 Pedro Alves <pedro@codesourcery.com>
9414 * linux-nat.c (linux_nat_wait): Adjust.
9415 (linux_nat_pid_to_str): Adjust. Remove call to thread_db_init.
9416 * linux-nat.h (thread_db_init): Delete declaration.
9417 * linux-thread-db.c (target_beneath): Delete.
9418 (thread_db_init): Delete.
9419 (thread_db_detach): Use find_target_beneath.
9420 (thread_db_wait): Adjust interface. Use find_target_beneath.
9421 (thread_db_mourn_inferior): Use find_target_beneath.
9422 (thread_db_can_async_p, thread_db_is_async_p, thread_db_async)
9423 (thread_db_async_mask): Delete.
9424 (thread_db_pid_to_str): Adjust interface. Use
9425 find_target_beneath.
9426 (thread_db_get_thread_local_address): Adjust interface. Use
9427 find_target_beneath.
9428 (init_thread_db_ops): Delete references to delete functions.
9429 * target.c (update_current_target): Don't inherit or default
9430 to_wait. Don't inherit to_pid_to_str and
9431 to_get_thread_local_address.
9432 (target_translate_tls_address): Look for a pushed target that
9433 implements to_get_thread_local_address, and use it instead of
9434 checking for target_get_thread_local_address_p.
9435 (target_wait, target_pid_to_str): Reimplement as functions.
9436 (dummy_pid_to_str): New.
9437 (init_dummy_target): Register it.
9438 (debug_to_wait): Delete.
9439 * target.h (struct target_ops): Make to_wait, to_pid_to_str and
9440 to_get_thread_local_address accept a pointer to struct target_ops.
9441 (target_wait): Delete macro, and declare as function.
9442 (target_pid_to_str): Likewise.
9443 (target_get_thread_local_address)
9444 (target_get_thread_local_address_p): Delete.
9445 (noprocess): Add NORETURN and ATTR_NORETURN tags.
9446 * inf-ptrace.c (inf_ptrace_wait): Adjust.
9447 (inf_ptrace_pid_to_str): New.
9448 (inf_ptrace_target): Use inf_ptrace_pid_to_str.
9449 * aix-thread.c (aix_thread_wait, aix_thread_pid_to_str): Adjust.
9450 * bsd-kvm.c (bsd_kvm_pid_to_str): Adjust.
9451 * bsd-uthread.c (bsd_uthread_wait, bsd_uthread_pid_to_str):
9453 * corelow.c (core_pid_to_str): Adjust.
9454 * darwin-nat.c (darwin_wait, darwin_pid_to_str): Adjust.
9455 * dec-thread.c (dec_thread_wait, dec_thread_pid_to_str): Adjust.
9456 * gnu-nat.c (gnu_wait, gnu_pid_to_str): Adjust.
9457 * go32-nat.c (go32_wait, go32_pid_to_str): Adjust.
9458 * hpux-thread.c (hpux_thread_wait): Adjust.
9459 * inf-ttrace.c (inf_ttrace_wait, inf_ttrace_pid_to_str): Adjust.
9460 * monitor.c (monitor_wait, monitor_pid_to_str): Adjust.
9461 * nto-procfs.c (procfs_wait, procfs_pid_to_str): Adjust.
9462 * procfs.c (procfs_pid_to_str): Adjust.
9463 * remote-m32r-sdi.c (m32r_wait, m32r_pid_to_str): Adjust.
9464 * remote-mips.c (mips_wait): Adjust.
9465 * remote-sim.c (gdbsim_wait, gdbsim_pid_to_str): Adjust.
9466 * remote.c (remote_wait, remote_pid_to_str)
9467 (remote_get_thread_local_address): Adjust.
9468 * rs6000-nat.c (rs6000_wait): Adjust.
9469 * sol-thread.c (procfs_pid_to_str): Adjust declaration.
9470 (sol_thread_wait, solaris_pid_to_str): Adjust.
9471 * spu-linux-nat.c (spu_child_wait): Adjust.
9472 * windows-nat.c (windows_wait, windows_pid_to_str): Adjust.
9474 2009-02-06 Tom Tromey <tromey@redhat.com>
9476 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-cmd.o.
9477 (SUBDIR_PYTHON_SRCS): Add python-cmd.c.
9478 (python-cmd.o): New target.
9479 * cli/cli-decode.c (set_cmd_completer): Add self parameter to
9480 completer prototype.
9481 (add_cmd): Initialize destroyer member of cmd_list_element. Use
9482 make_symbol_completion_list_fn as completer.
9483 (delete_cmd): Call destroyer if one is set.
9484 * cli/cli-decode.h (cmd_list_element): Add cmd parameter to
9485 completer member. Add destroyer member.
9486 (set_cmd_completer): Add self parameter to
9487 completer prototype.
9488 * command.h (set_cmd_completer): Add cmd parameter to
9489 completer prototype.
9490 * completer.c (noop_completer, filename_completer,
9491 location_completer, expression_completer, command_completer): Adapt
9492 to new completer prototype.
9493 (complete_line_internal): Pass new parameter to completer function.
9494 * completer.h (noop_completer, filename_completer,
9495 location_completer, expression_completer, command_completer): Adapt
9496 prototypes to new completer prototype.
9497 * interps.c (interpreter_completer): Adapt to new completer
9499 * python/python-cmd.c: New file.
9500 * python/python-internal.h (gdbpy_initialize_commands): Add
9502 (gdbpy_doc_cst): Add forward declaration.
9503 * python/python.c (gdbpy_doc_cst): Declare.
9504 (_initialize_python): Call gdbpy_initialize_commands. Initialize
9506 * symtab.c (make_symbol_completion_list_fn): New function.
9507 * symtab.h (make_symbol_completion_list_fn): Add prototype.
9509 2009-02-06 Pedro Alves <pedro@codesourcery.com>
9511 * target.c (target_get_osdata): Check for equal or higher than
9512 process_stratum, not dummy_stratum.
9514 2009-02-06 Pedro Alves <pedro@codesourcery.com>
9516 * remote.c (extended_remote_can_run): Delete.
9517 (init_remote_ops): Don't register it.
9518 * target.c (target_get_osdata): Don't check for target_can_run.
9519 Instead any target that has already been pushed, otherwise
9520 fallback to the default run target.
9522 2009-02-06 Pedro Alves <pedro@codesourcery.com>
9524 * target.c (target_create_inferior, target_detach)
9525 (target_mourn_inferior, target_attach, target_close): Do target
9527 (debug_to_attach, debug_to_detach, debug_to_create_inferior)
9528 (debug_to_mourn_inferior, debug_to_close): Delete.
9529 (setup_target_debug): Adjust.
9531 2009-02-05 Pedro Alves <pedro@codesourcery.com>
9533 * target.h (target_stopped_data_address_p): Delete declaration,
9534 and don't define as macro.
9535 * target.c (target_stopped_data_address_p): Delete.
9537 2009-02-05 Thiago Jung Bauermann <bauerman@br.ibm.com>
9538 Tom Tromey <tromey@redhat.com>
9540 * python/python-utils.c (target_string_to_unicode): New function.
9541 * python/python-internal.h (target_string_to_unicode): New prototype.
9542 * python/python-value.c (valpy_string): New function.
9543 (value_object_methods): Add `string' entry.
9545 2009-02-05 Pedro Alves <pedro@codesourcery.com>
9547 * target.h (target_tid_to_str): Delete.
9548 * thread.c (print_thread_info, thread_apply_all_command)
9549 (thread_apply_command, thread_command, do_captured_thread_select):
9550 Use target_pid_to_str instead of target_tid_to_str.
9551 * linux-fork.c (delete_fork_command): Likewise.
9553 2009-02-05 Pedro Alves <pedro@codesourcery.com>
9555 * frame.c (has_stack_frames): Make public.
9556 (get_prev_frame): Don't allow a NULL this_frame anymore.
9557 * frame.h (has_stack_frames): Declare.
9558 * varobj.c (find_frame_addr_in_frame_chain): Don't ever pass NULL
9559 to get_prev_frame, instead start at get_current_frame.
9560 (varobj_create): Check has_stack_frames before getting any frame;
9561 eliminate one usage of deprecated_safe_get_selected_frame.
9563 2009-02-05 Tom Tromey <tromey@redhat.com>
9564 Thiago Jung Bauermann <bauerman@br.ibm.com>
9566 * python/python.c (GdbMethods): Move to bottom of file.
9567 (get_parameter, execute_gdb_command, gdbpy_write,
9568 gdbpy_flush): Remove forward declarations.
9569 (eval_python_from_control_command): Fix error checking of function
9570 PyRun_SimpleString. Fix error string.
9571 (python_command): Likewise.
9572 (execute_gdb_command): Added from_tty argument.
9574 2009-02-05 Thiago Jung Bauermann <bauerman@br.ibm.com>
9576 * language.h (language_dfn): Add la_get_string member.
9577 (LA_GET_STRING): New macro.
9578 (default_get_string): New prototype.
9579 * language.c (default_get_string): New function.
9580 (unknown_language_defn, auto_language_defn, local_language_defn): Use
9581 default_get_string for la_get_string.
9582 * c-lang.c (c_get_string): New function.
9583 (c_language_defn, cplus_language_defn, asm_language_defn): Use
9584 c_get_string for la_get_string.
9585 (minimal_language_defn): Likewise
9586 * ada-lang.c (ada_language_defn): Likewise.
9587 * f-lang.c (f_language_defn): Use default_get_string for
9589 * jv-lang.c (java_language_defn): Likewise.
9590 * m2-lang.c (m2_language_defn): Likewise.
9591 * objc-lang.c (objc_language_defn): Likewise.
9592 * p-lang.c (p_language_defn): Likewise.
9593 * scm-lang.c (scm_language_defn): Likewise.
9594 * typeprint.c (type_to_string): New function.
9595 * value.h (type_to_string): New prototype.
9596 * valprint.c (val_print_string): Factor out code for reading string
9597 from the inferior into its own function. Put 2 spaces after period
9599 (read_string): New function.
9600 * valprint.h (read_string): New prototype.
9602 2009-01-07 Pierre Muller <muller@ics.u-strasbg.fr>
9603 Tom Tromey <tromey@redhat.com>
9605 PR breakpoints/8079:
9606 * breakpoint.c (print_one_breakpoint): Use exp_string field
9607 to display expression of watchpoints.
9608 (mention): Likewise.
9609 (watch_command_1): Remove trailing whitespace from expression.
9610 * printcmd.c (struct display) <exp_string>: New field.
9611 (display_command): Set exp_string.
9612 (free_display): Free exp_string.
9613 (clear_displays): Use free_display.
9614 (do_one_display): Print exp_string.
9615 (display_info): Likewise.
9617 2009-02-04 Tom Tromey <tromey@redhat.com>
9618 Thiago Jung Bauermann <bauerman@br.ibm.com>
9619 Phil Muldoon <pmuldoon@redhat.com>
9621 * python/python-internal.h (gdbpy_get_value_from_history): Rename
9622 prototype to gdbpy_history.
9623 (gdbpy_is_string): Declare.
9624 (python_string_to_host_string): Declare.
9625 * python/python-utils.c (gdbpy_is_string): New function.
9626 (unicode_to_encoded_string): New function.
9627 (unicode_to_target_string): Use it.
9628 (python_string_to_host_string): New function.
9629 * python/python-value.c (valpy_address): New function.
9630 (convert_value_from_python): Use gdbpy_is_string. Change to throw
9631 Python exception instead of a GDB exception on error. Properly check
9633 (valpy_getitem): Convert field name to host string. Handle array
9634 accesses. Adapt to new behaviour of convert_value_from_python.
9635 (valpy_new): Adapt to new behaviour of convert_value_from_python.
9636 (enum valpy_opcode) <VALPY_LSH, VALPY_RSH, VALPY_BITAND,
9637 VALPY_BITXOR, VALPY_BITOR>: New constants.
9638 (valpy_binop): Update. Adapt to new behaviour of
9639 convert_value_from_python.
9640 (valpy_invert): New function.
9641 (valpy_lsh): Likewise.
9642 (valpy_rsh): Likewise.
9643 (valpy_and): Likewise.
9644 (valpy_or): Likewise.
9645 (valpy_xor): Likewise.
9646 (valpy_richcompare): Call convert_value_from_python instead of doing
9648 (is_intlike, valpy_int, valpy_long, valpy_float): New functions.
9649 (gdbpy_get_value_from_history): Rename
9650 function to gdbpy_history.
9651 (gdbpy_initialize_values): Don't set tp_new.
9652 (value_object_type): Add valpy_new.
9653 (value_object_methods): Add `address' entry.
9654 (value_object_as_number): Update for new methods.
9655 * python/python.c (GdbMethods): Rename entry from
9656 `get_value_from_history' to `history'.
9658 2009-02-04 Jerome Guitton <guitton@adacore.com>
9660 * ada-lang.c (ada_template_to_fixed_record_type_1): Check size
9661 of type to guard against a crash.
9663 2009-02-04 Jerome Guitton <guitton@adacore.com>
9665 * value.c (value_from_contents_and_address): Always return
9666 a lval_memory value, even if address is null.
9668 2009-02-04 Tristan Gingold <gingold@adacore.com>
9670 * i386-darwin-tdep.c (i386_darwin_sigcontext_addr): New function.
9671 (amd64_darwin_sigcontext_addr): Ditto.
9672 (darwin_dwarf_signal_frame_p): Ditto.
9673 (i386_darwin_init_abi): Handle signal frames, use the const for
9675 (x86_darwin_init_abi_64): Ditto.
9677 2009-02-04 Tristan Gingold <gingold@adacore.com>
9679 * i386-tdep.c (i386_sigtramp_p): Make it public.
9680 * i386-tdep.h (i386_sigtramp_p): Declare.
9682 2009-02-04 Tristan Gingold <gingold@adacore.com>
9684 * machoread.c (macho_symfile_read): Read minsymtab also from
9686 (macho_symfile_read): Try to read dwarf2 frame info from main
9687 object file, but not from OSO files.
9688 (macho_symfile_offsets): Update section names for latest BFD
9690 * i386-darwin-tdep.c (i386_darwin_init_abi): Call set_solib_ops.
9691 (x86_darwin_init_abi_64): Ditto.
9692 * solib-darwin.c: New file.
9693 * solib-darwin.h: New file.
9694 * configure.tgt: Add solib.o solib-darwin.o for Darwin.
9696 2009-02-04 Tristan Gingold <gingold@adacore.com>
9698 * solist.h (struct target_so_ops): Comment fallback behavior for
9701 2009-02-03 Tom Tromey <tromey@redhat.com>
9703 * completer.c (add_struct_fields): Check type_name against NULL
9706 2009-02-03 Joel Brobecker <brobecker@adacore.com>
9708 * MAINTAINERS: Update Elena's email address.
9710 2009-02-02 Joel Brobecker <brobecker@adacore.com>
9712 * breakpoint (update_watchpoint): Minor comment adjustment.
9714 2009-02-02 Tom Tromey <tromey@redhat.com>
9717 * completer.c (count_struct_fields): Count method names.
9718 (add_struct_fields): Add matching method names.
9720 2009-02-02 Doug Evans <dje@google.com>
9722 * configure.ac (gdbkt): Check both no_tcl/no_tk first, before
9723 doing any further tcl/tk configury. Don't configure gdbtk if
9724 tcl or tk check fails.
9725 * aclocal.m4: Regenerate.
9726 * configure: Regenerate.
9728 2009-02-02 Tom Tromey <tromey@redhat.com>
9731 * valops.c (find_overload_match): Follow typedefs before taking
9732 address of object argument.
9734 2009-02-01 Doug Evans <dje@google.com>
9736 * target.h (target_waitstatus_to_string): Declare.
9737 * target.c (target_waitstatus_to_string): New function. Copied from
9738 debug_to_wait. Add missing entries for TARGET_WAITKIND_SYSCALL_ENTRY,
9739 TARGET_WAITKIND_SYSCALL_RETURN, TARGET_WAITKIND_IGNORE,
9740 TARGET_WAITKIND_NO_HISTORY.
9741 (debug_to_wait): Call it.
9742 * infrun.c (wait_for_inferior): If debug_infrun, print result of
9744 (fetch_inferior_event): Ditto.
9746 2009-01-30 Tom Tromey <tromey@redhat.com>
9748 * Makefile.in (HFILES_NO_SRCDIR): Remove i386-cygwin-tdep.h.
9750 2009-01-30 Vladimir Prus <vladimir@codesourcery.com>
9753 * thread.c (do_captured_list_thread_ids): Report the current
9756 2009-01-30 Vladimir Prus <vladimir@codesourcery.com>
9758 * breakpoint.c (create_breakpoint, create_breakpoints)
9759 (break_command_really, set_breakpoint): New parameter enabled.
9760 (create_breakpoint, break_command_really): Make breakpoint
9761 disabled if so requested.
9762 * breakpoint.h (set_breakpoint): New parameter enabled.
9763 * mi/mi-cmd-break.c (mi_cmd_break_insert): Handle the -d option.
9765 2009-01-28 Doug Evans <dje@google.com>
9767 * amd64-tdep.h (amd64_displaced_step_copy_insn): Declare.
9768 (amd64_displaced_step_fixup): Declare.
9769 * amd64-tdep.c: #include opcode/i386.h, dis-asm.h.
9770 (amd64_arch_regmap): Move out of amd64_analyze_stack_align
9771 and make static global.
9772 (amd64_arch_regmap_len): New static global.
9773 (amd64_arch_reg_to_regnum): New function.
9774 (struct amd64_insn): New struct.
9775 (struct displaced_step_closure): New struct.
9776 (onebyte_has_modrm,twobyte_has_modrm): New static globals.
9777 (rex_prefix_p,skip_prefixes)
9778 (amd64_insn_length_fprintf,amd64_insn_length_init_dis)
9779 (amd64_insn_length,amd64_get_unused_input_int_reg)
9780 (amd64_get_insn_details,fixup_riprel,fixup_displaced_copy)
9781 (amd64_displaced_step_copy_insn)
9782 (amd64_absolute_jmp_p,amd64_absolute_call_p,amd64_ret_p)
9783 (amd64_call_p,amd64_breakpoint_p,amd64_syscall_p)
9784 (amd64_displaced_step_fixup): New functions.
9785 * amd64-linux-tdep.c: #include arch-utils.h.
9786 (amd64_linux_init_abi): Install displaced stepping support.
9788 2009-01-28 Daniel Jacobowitz <dan@codesourcery.com>
9789 Jerome Guitton <guitton@adacore.com>
9791 * configure, config.in: Regenerated.
9792 * configure.ac: Add --with-system-gdbinit.
9793 * main.c (get_init_files): New.
9794 (captured_main): Use get_init_files. Load system gdbinit before
9796 (print_gdb_help): Print location of init files.
9798 2009-01-28 Pedro Alves <pedro@codesourcery.com>
9800 * corefile.c (generic_search): Delete disabled code.
9801 * gdbcore.h (generic_search): Delete declaration.
9803 2009-01-26 Pedro Alves <pedro@codesourcery.com>
9805 * linux-nat.c (linux_child_follow_fork): Copy attach_flag from the
9806 parent to the child.
9807 * inf-ttrace.c (inf_ttrace_follow_fork): Likewise.
9808 * inf-ptrace.c (inf_ptrace_follow_fork): Likewise. Use
9809 remove_breakpoints to remove breakpoints from the parent.
9811 2009-01-26 Pedro Alves <pedro@codesourcery.com>
9813 PR backtrace/9458, PR backtrace/8864:
9814 * frame.c (create_new_frame): Update the frame's cached PC before
9815 finding its unwinder. Use frame_id_build to build the new frame's
9817 * stack.c (parse_frame_specification_1): Correct setting ``addrs''
9818 array values from the ``args'' array values.
9820 2009-01-26 Pedro Alves <pedro@codesourcery.com>
9822 * gdbtypes.c (alloc_type, alloc_type_instance, create_range_type)
9823 (create_array_type, create_set_type, init_flags_type)
9824 (copy_type_recursive): Replace pairs of calls to XALLOC and memset
9825 with a call to XZALLOC or XCALLOC, and pairs of calls to
9826 obstack_alloc and memset with a call to OBSTACK_ZALLOC.
9828 2009-01-26 Pedro Alves <pedro@codesourcery.com>
9830 Add "maint set|show internal-error|internal-warning quit|corefile
9831 ask|yes|no" commands.
9834 * utils.c (internal_problem_ask, internal_problem_yes)
9835 (internal_problem_no, internal_problem_modes): New.
9836 (struct internal_problem): Remove FIXME. Make should_quit and
9837 should_dump_core types to char *.
9838 (internal_vproblem, internal_error_problem)
9839 (internal_warning_problem): Adjust.
9840 (set_internal_problem_cmd, show_internal_problem_cmd): New dummy
9842 (add_internal_problem_command): New.
9843 (_initialize_utils): New.
9845 2009-01-25 Pedro Alves <pedro@codesourcery.com>
9847 * infcmd.c (program_info): Use paddress instead of casting stop_pc
9850 2009-01-24 Pedro Alves <pedro@codesourcery.com>
9852 * infrun.c (normal_stop): Don't call
9853 deprecated_update_frame_pc_hack.
9854 * frame.c (deprecated_update_frame_pc_hack)
9855 (deprecated_update_frame_base_hack): Delete, and ...
9856 (create_new_frame): ... inline here.
9857 * frame.h (deprecated_update_frame_pc_hack)
9858 (deprecated_update_frame_base_hack): Delete declarations.
9860 2009-01-23 Pedro Alves <pedro@codesourcery.com>
9862 * cli/cli-decode.c (add_setshow_zuinteger_cmd): New.
9863 * cli/cli-setshow.c (do_setshow_command): Handle it.
9864 * command.h (enum var_types): Add var_zuinteger.
9865 (add_setshow_zuinteger_cmd): Declare.
9867 * valprint.c (_initialize_valprint): Change the set input-radix
9868 and set output-radix commands to zuinteger type.
9870 2009-01-23 Pedro Alves <pedro@codesourcery.com>
9873 * infrun.c (normal_stop): Tag threads as stopped, and run the
9874 hook-stop before printing the stack frame.
9876 2009-01-22 Pedro Alves <pedro@codesourcery.com>
9879 * gnu-v3-abi.c (gnuv3_baseclass_offset): Call check_typedef on
9882 2009-01-20 Kazu Hirata <kazu@codesourcery.com>
9884 * gdb/procfs.c (info_mappings_callback): Cast map->pr_size to
9887 2009-01-20 Daniel Jacobowitz <dan@codesourcery.com>
9890 * infcmd.c (signal_command): Do not specify a resume PC.
9892 2009-01-19 Doug Evans <dje@google.com>
9894 * dummy-frame.c (dummy_frame): Replace regcache member with
9896 (dummy_frame_push): Replace caller_regcache arg with caller_state.
9897 All callers updated.
9898 (remove_dummy_frame,pop_dummy_frame,lookup_dummy_frame): New fns.
9899 (dummy_frame_pop): Rewrite. Verify requested frame is in the
9900 dummy frame stack. Restore program state.
9901 (cleanup_dummy_frames): Rewrite.
9902 (dummy_frame_sniffer): Update. Make static.
9903 * dummy-frame.h (regcache,frame_info): Delete forward decls.
9904 (inferior_thread_state): New forward decl.
9905 (dummy_frame_push): Update prototype.
9906 * frame.c (frame_pop): dummy_frame_pop now does all the work for
9908 * infcall.c (breakpoint_auto_delete_contents): Delete.
9909 (get_function_name,run_inferior_call): New fns.
9910 (call_function_by_hand): Simplify by moving some code to
9911 get_function_name, run_inferior_call. Inferior function call wrapped
9912 in TRY_CATCH so there's less need for cleanups and all exits from
9913 proceed are handled similarily. Detect program exit.
9914 Detect program stopping in a different thread.
9915 Make error messages more consistent.
9916 * inferior.h (inferior_thread_state): Declare (opaque type).
9917 (save_inferior_thread_state,restore_inferior_thread_state,
9918 make_cleanup_restore_inferior_thread_state,
9919 discard_inferior_thread_state, get_inferior_thread_state_regcache):
9921 (save_inferior_status): Update prototype.
9922 * infrun.c: (normal_stop): When stopped for the completion of an
9923 inferior function call, verify the expected stack frame kind.
9924 (inferior_thread_state): New struct.
9925 (save_inferior_thread_state,restore_inferior_thread_state,
9926 do_restore_inferior_thread_state_cleanup,
9927 make_cleanup_restore_inferior_thread_state,
9928 discard_inferior_thread_state,
9929 get_inferior_thread_state_regcache): New functions.
9930 (inferior_status): Move stop_signal, stop_pc, registers to
9931 inferior_thread_state. Remove restore_stack_info.
9932 (save_inferior_status): Remove arg restore_stack_info.
9933 All callers updated. Remove saving of state now saved by
9934 save_inferior_thread_state.
9935 (restore_inferior_status): Remove restoration of state now done by
9936 restore_inferior_thread_state.
9937 (discard_inferior_status): Remove freeing of registers, now done by
9938 discard_inferior_thread_state.
9940 2009-01-18 Pedro Alves <pedro@codesourcery.com>
9942 * tui/tui-disasm.c (tui_vertical_disassem_scroll): Scroll one line
9943 at a time, times NUM_TO_SCROLL.
9944 * tui/tui-winsource.c (tui_horizontal_source_scroll): Don't try to
9945 fetch the selected frame if there is no stack.
9947 2009-01-18 Pedro Alves <pedro@codesourcery.com>
9950 * gdbthread.h (finish_thread_state, finish_thread_state_cleanup):
9952 * thread.c (finish_thread_state, finish_thread_state_cleanup): New.
9953 * infrun.c (wait_for_inferior, fetch_inferior_event): If an error
9954 is thrown while handling an event, finish the thread state.
9955 (normal_stop): Use finish_thread_state cleanup.
9956 * infcmd.c (run_command_1): If an error is thrown while starting
9957 the inferior, finish the thread state.
9959 2009-01-18 Pedro Alves <pedro@codesourcery.com>
9961 * tui/tui-winsource.c (tui_update_breakpoint_info): In asm layout,
9962 skip breakpoints without a location (pending breakpoints).
9964 2009-01-18 Pedro Alves <pedro@codesourcery.com>
9967 * hppa-hpux-tdep.c (hppa_hpux_write_pc): Remove 'return'.
9969 2009-01-18 Nick Roberts <nickrob@snap.net.nz>
9971 * thread.c (thread_command): Move call to annotate_thread_changed
9973 (do_captured_thread_select): ... here, to avoid printing an
9974 annotation if the thread change generates an exception.
9976 2009-01-16 Joel Brobecker <brobecker@adacore.com>
9978 * NEWS: Document x86_64/MinGW as a new native configuration.
9980 2009-01-16 Joel Brobecker <brobecker@adacore.com>
9982 * NEWS: Move the documentation of "info os processes" to
9983 the appropriate section (documenting the new commands).
9985 2009-01-15 Doug Evans <dje@google.com>
9987 * target.h (target_signal_to_string): Make return type const char *.
9988 (target_signal_to_name): Ditto.
9989 (target_signal_from_name): Make arg const char *.
9990 * infrun.c (sig_print_info): Update.
9991 * signals/signals.c (signals): Make array and struct members const.
9992 (target_signal_to_string): Make return type const char *.
9993 (target_signal_to_name): Ditto.
9994 (target_signal_from_name): Make arg const char *.
9996 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
9997 Tristan Gingold <gingold@adacore.com>
9999 * solist.h (struct target_so_ops): New member bfd_open.
10000 (solib_find): Add prototype.
10001 (solib_bfd_fopen): Add prototype.
10002 * solib.c (solib_find, solib_bfd_fopen): New functions, extracted
10003 from solib_bfd_open.
10004 (solib_bfd_open): Use ops->bfd_open override if present. Call
10005 solib_find and solib_bfd_open otherwise.
10007 * objfiles.h (OBJF_KEEPBFD): New define.
10008 * objfiles.c (free_objfile): Do not close BFD if OBJF_KEEPBFD
10009 objfile flag is set.
10010 * solib.c (symbol_add_stub): Do not allocate second BFD for
10011 shared library; use OBJF_KEEPBFD flag on solib objfile.
10013 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
10015 * frame.c (get_frame_arch): Abort if called with NULL this_frame.
10017 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
10019 * value.h (address_of_variable): Add prototype.
10020 (locate_var_value): Remove prototype.
10022 * findvar.c (read_var_value): Do not attempt to default frame
10024 (locate_var_value): Remove function.
10025 * valops.c (value_of_variable): Retrieve selected frame for
10026 symbols that require a frame when called with NULL block.
10027 * valops.c (address_of_variable): New function.
10029 * eval.c (evaluate_subexp_for_address): Call address_of_variable
10030 instead of calling locate_var_value.
10031 (evaluate_subexp_with_coercion): Likewise.
10033 2009-01-14 Daniel Jacobowitz <dan@codesourcery.com>
10035 * NEWS: Document "define" for prefixed commands.
10036 * cli/cli-cmds.c (show_user): Update calls to show_user_1. Call
10037 show_user_1 for prefix commands.
10038 * cli/cli-decode.c (help_cmd_list): Recurse for "help user-defined".
10039 * cli/cli-script.c (validate_comname): Rewrite to handle prefix
10040 commands. Return the containing command list.
10041 (define_command, document_command): Update to handle prefix commands.
10042 (show_user_1): Add prefix and name arguments. Handle prefix
10044 * cli/cli-script.h (show_user_1): Update prototype.
10046 2009-01-14 Kai Tietz <kai.tietz@onevision.com>
10048 * ser-mingw.c (console_select_thread): Add return to make
10050 (pipe_select_thread): Likewise.
10051 (file_select_thread): Likewise.
10053 2009-01-14 Pedro Alves <pedro@codesourcery.com>
10055 * mi/mi-main.c (mi_cmd_execute): Clean up parenthesis mess from
10058 2009-01-14 Pedro Alves <pedro@codesourcery.com>
10060 * remote.c (extended_remote_mourn_1): Invalidate our notion of
10061 current general thread.
10063 2009-01-14 Pedro Alves <pedro@codesourcery.com>
10065 * mi/mi-main.c (mi_cmd_execute): Also allow -list-thread-groups
10066 without a live selected thread.
10068 2009-01-14 Joel Brobecker <brobecker@adacore.com>
10070 Update the copyright notice of some of the files I missed
10071 in the previous copyright update.
10073 2009-01-14 Joel Brobecker <brobecker@adacore.com>
10075 * windows-nat.c (handle_unload_dll): Use %p to print the DLL
10076 base address instead of casting it to DWORD.
10078 2009-01-13 Ulrich Weigand <uweigand@de.ibm.com>
10080 * dwarf2loc.c (dwarf2_evaluate_loc_desc): Do not call get_frame_arch
10081 for NULL frame pointers.
10083 2009-01-13 Mark Kettenis <kettenis@gnu.org>
10085 * utils.c (host_address_to_string): Reimplement in a way that
10086 avoids the cast of the address to long.
10088 2009-01-13 Joel Brobecker <brobecker@adacore.com>
10090 * mdebugread.c (parse_symbol): Save the symbol private data
10091 using SYMBOL_VALUE_BYTES instead of SYMBOL_VALUE.
10092 (psymtab_to_symtab_1): Likewise.
10093 (parse_procedure): Declare variable "e" only in the scope
10094 where it is used. Extract the symbol private data using
10095 SYMBOL_VALUE_BYTES.
10097 2009-01-13 Jim Blandy <jimb@codesourcery.com>
10099 Abstract out common code for copying value locations.
10101 * value.h (set_value_component_location): New declaration.
10102 * value.c (set_value_component_location): New function.
10103 (value_primitive_field): Use it.
10104 * valarith.c (value_subscript, value_subscripted_rvalue): Same.
10105 * valops.c (search_struct_field, value_slice): Same.
10106 * ada-lang.c (coerce_unspec_val_to_type)
10107 (ada_value_primitive_packed_val): Same.
10109 2009-01-13 Joel Brobecker <brobecker@adacore.com>
10111 * MAINTAINERS (GLOBAL MAINTAINERS): Add Tom Tromey.
10113 2009-01-12 Christopher Faylor <me+cygwin@cgf.cx>
10115 * amd64-windows-nat.c Rename gdb-specific win32_* to windows_*
10117 * i386-cygwin-tdep.c: Ditto.
10118 * i386-windows-nat.c: Ditto.
10119 * windows-nat.h: Ditto.
10120 * windows-tdep.c: Ditto.
10121 * windows-tdep.h: Ditto.
10122 * windows-nat.c: Ditto.
10123 (cygwin_load_start): Redefine as CORE_ADDR.
10124 (cygwin_load_end): Ditto.
10125 (windows_make_so): Coerce result of address arithmetic to uintptr_t
10126 before coercing to CORE_ADDR to avoid a compiler warning.
10127 (handle_exception): Define addr as CORE_ADDR and coerce
10128 ExceptionAddress to uintptr_t before assigining to avoid a compiler
10130 * config/djgpp/fnchange.lst: Add mappings for recently renamed windows
10133 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
10135 Fix linking with --enable-targets=all:
10136 * Makefile.in (ALL_TARGET_OBS): Add windows-tdep.o.
10137 (HFILES_NO_SRCDIR): Add windows-tdep.h.
10138 (ALLDEPFILES): Add windows-tdep.c.
10140 2009-01-11 Chris Faylor <me.gdb@cgf.cx>
10142 * win32-nat.h: Delete.
10143 * windows-nat.h: Rename from win32-nat.h.
10144 * win32-nat.c: Delete.
10145 * windows-nat.c: Rename from win32-nat.c.
10146 * win32-termcap.c: Delete.
10147 * windows-termcap.c: Rename from win32-termcap.c.
10148 * amd64-windows-nat.c: Handle rename from win32-nat.h -> windows-nat.h.
10149 * configure.ac: Handle rename from win32-termcap.c ->
10151 * configure: Regenerate.
10152 * gdb_curses.h: Change comment to reflect rename from win32-termcap.c
10153 -> windows-termcap.c.
10154 * i386-cygwin-tdep.c: Handle rename from win32-tdep.h ->
10156 * i386-windows-nat.c: Refect rename from win32-nat.h -> windows-nat.h.
10157 * windows-nat.c: Ditto. Also reflect rename from from win32-tdep.h ->
10159 (win32_make_so): Handle cygwin compiler warning due to change of
10160 load_addr from DWORD to LPVOID.
10161 (handle_load_dll): Use %p in format string to properly print address
10162 and avoid a compiler warning.
10163 (DEBUG_EXCEPTION_SIMPLE): Ditto.
10164 (handle_exception): Ditto.
10165 * windows-tdep.c: Handle rename from win32-tdep.h -> windows-tdep.h.
10166 * config/i386/cygwin.mh: Handle rename from win32-nat.o ->
10168 * config/i386/mingw.mh: Ditto.
10169 * config/i386/mingw64.mh: Ditto.
10171 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
10173 * f-typeprint.c (f_type_print_varspec_suffix): Convert the autovariable
10174 arrayprint_recurse_level to a parameter. Update all the callers. New
10175 comment at autovariables.
10177 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
10179 * gdbtypes.c (make_qualified_type, replace_type): Reformat to the GNU
10182 2009-01-11 Joel Brobecker <brobecker@adacore.com>
10184 * target.c (target_xfer_partial): Use host_address_to_string to
10185 print the address of readbuf and writebuf. Cast the address of
10186 elements inside the myaddr buffer into intptr_t.
10187 (deprecated_debug_xfer_memory): Use paddress to print memaddr.
10188 Cast the address of elements inside the myaddr buffer into
10191 2009-01-11 Joel Brobecker <brobecker@adacore.com>
10193 * amd64-windows-nat.c, amd64-windows-tdep.c: New files.
10194 * config/i386/mingw64.mh, config/i386/nm-cygwin64.h: New files.
10195 * configure.host, configure.tgt: Add handling for x86_64/windows.
10196 * config/djgpp/fnchange.lst: Add entries for amd64-windows-nat.c
10197 and amd64-windows-tdep.c.
10199 2009-01-11 Joel Brobecker <brobecker@adacore.com>
10201 * win32-tdep.h, win32-tdep.c: New files.
10202 * i386-cygwin-tdep.h: Delete.
10203 * i386-cygwin-tdep.c: Include win32-tdep.h instead of
10204 i386-cygwin-tdep.h.
10205 (win32_xfer_shared_library): Delete. Moved to win32-tdep.c.
10206 * win32-nat.c: Likewise.
10207 * configure.tgt: Add win32-tdep.o to the list of target object
10208 files for i386-cygwin and i386-mingw targets.
10210 2009-01-11 Joel Brobecker <brobecker@adacore.com>
10212 * win32-nat.h: New file.
10213 * win32-nat.c (mappings): Initialize to NULL.
10214 (win32_set_context_register_offsets): New function.
10215 * i386-windows-nat.c: New file.
10216 (mappings): Moved here from win32-nat.c.
10217 (_initialize_i386_windows_nat): New function.
10218 * config/i386/mingw.mh (NATDEPFILES): Add i386-windows-nat.o.
10219 * config/i386/cygwin.mh (NATDEPFILES): Likewise.
10221 2009-01-09 Andreas Schwab <schwab@suse.de>
10223 * Makefile.in (init.c): Set LANG/LC_ALL to C, not c.
10225 2009-01-09 Daniel Jacobowitz <dan@codesourcery.com>
10227 * gdbtypes.c (append_composite_type_field): Correct the location of
10230 2009-01-09 Pedro Alves <pedro@codesourcery.com>
10232 * defs.h (deprecated_error_hook): Delete declaration.
10233 * interps.c (clear_interpreter_hooks): Adjust.
10234 * remote-sim.c (gdb_os_error): Don't try to call
10235 deprecated_error_hook. No need to call exit anymore.
10236 * top.c (deprecated_error_hook): Delete.
10238 2009-01-09 Joel Brobecker <brobecker@adacore.com>
10240 * arch-utils.c (gdbarch_update_p): Use host_address_to_string
10241 to print the address of the gdbarch pointer.
10243 2009-01-09 Joel Brobecker <brobecker@adacore.com>
10245 * gdbarch.sh: Fix all the compilation errors on amd64-windows
10246 due to casting a pointer to a long when printing a function
10247 address. Instead, use host_address_to_string to convert our
10248 address to a string.
10249 * gdbarch.c: Regenerate.
10251 2009-01-09 Joel Brobecker <brobecker@adacore.com>
10253 * event-top.c (async_disconnect, async_stop_sig): use "raise"
10254 instead of "kill" to raise a signal.
10256 2009-01-09 Joel Brobecker <brobecker@adacore.com>
10258 * win32-nat.c (get_module_name): Change the type of parameter
10259 "base_address" to LPVOID. Remove unnecessary cast.
10260 (struct lm_info): Change type of load_addr to LPVOID.
10261 (win32_make_so): Change the type of parameter "load_addr"
10262 to LPVOID. Remove some unnecessary casts.
10263 (handle_unload_dll): Change the type of "lpBaseOfDll" to LPVOID.
10264 (win32_xfer_shared_libraries): Add missing cast.
10266 2009-01-09 Joel Brobecker <brobecker@adacore.com>
10268 * win32-nat.c (has_detach_ability, set_process_privilege):
10269 Cast the result of GetProcAddress to (void *) to avoid
10270 a compilation warning.
10272 2009-01-09 Joel Brobecker <brobecker@adacore.com>
10274 * win32-nat.c (CONTEXT_EXTENDED_REGISTERS): Define to 0 if not
10277 2009-01-09 Joel Brobecker <brobecker@adacore.com>
10279 * win32-nat.c (get_image_name, win32_xfer_memory): Fix type
10280 definition of local variable "done".
10281 (info_w32_command, handle_exception): Remove unnecessary cast.
10283 2009-01-09 Joel Brobecker <brobecker@adacore.com>
10285 * win32-nat.c (kernel32_DebugSetProcessKillOnExit): Renames
10286 DebugSetProcessKillOnExit. Update all uses in this file.
10287 (kernel32_DebugActiveProcessStop): Renames DebugActiveProcessStop.
10288 Update all uses in this file.
10290 2009-01-09 Joel Brobecker <brobecker@adacore.com>
10292 * win32-nat.c (do_initial_win32_stuff): Add new ops parameter,
10293 and use it when pushing the target.
10294 (win32_attach, win32_create_inferior): Update call to
10295 do_initial_win32_stuff.
10296 (win32_detach, win32_mourn_inferior): Use our ops parameter
10297 instead of the global win32_ops to unpush the target.
10299 2009-01-09 Joel Brobecker <brobecker@adacore.com>
10301 * ser-mingw.c (ser_windows_open): Use proper type when casting
10302 in call to _open_osfhandle.
10304 2009-01-09 Kai Tietz <kai.tietz@onevision.com>
10306 * coff-pe-read.c (read_pe_exported_syms): Fix typo.
10308 2009-01-09 Joel Brobecker <brobecker@adacore.com>
10310 * CONTRIBUTE: Minor reformatting.
10312 2009-01-08 Kai Tietz <kai.tietz@onevision.com>
10314 * MAINTAINERS: Add myself to Write After Approval.
10315 * coff-pe-read.c (read_pe_exported_syms): Enable read of PE+
10318 2009-01-08 Nathan Froyd <froydnj@codesourcery.com>
10320 * remote-sim.c (gdb_os_error): Mark as a noreturn function.
10321 Call exit to make it obvious to GCC.
10323 2009-01-08 Tom Tromey <tromey@redhat.com>
10325 PR breakpoints/9350:
10326 * varobj.c (varobj_invalidate): Unconditionally free
10328 * symfile.c (syms_from_objfile): Free local_addr when returning
10330 * exec.c (exec_file_attach): Do cleanups before returning.
10331 (exec_file_command): Likewise.
10332 * corefile.c (reopen_exec_file): Do cleanups before returning.
10333 * breakpoint.c (insert_breakpoint_locations): Do cleanups before
10335 (do_vec_free): New function.
10336 (update_global_location_list): Make a cleanup for old_locations.
10337 Do cleanups before returning. Remove unused variable 'e'.
10338 (find_condition_and_thread): Free result of parsing the
10340 (print_it_typical): Do cleanups before returning.
10341 (breakpoint_re_set_one): Always free sals.sals.
10343 2009-01-08 Joel Brobecker <brobecker@adacore.com>
10344 Emi Suzuki <emi-suzuki@tjsys.co.jp>
10346 * breakpoint.c (do_enable_breakpoint): Use update_watchpoint for
10349 2009-01-07 Doug Evans <dje@google.com>
10351 * top.c (gdb_prompt_string): Delete, unused.
10353 2009-01-07 Pedro Alves <pedro@codesourcery.com>
10355 Delete ONE_PROCESS_WRITETEXT leftovers.
10357 * breakpoint.c (insert_bp_location): Delete process_warning
10359 (insert_breakpoint_locations): Adjust.
10360 (reattach_breakpoints): Adjust.
10361 * infrun.c (normal_stop): Drop "It might be running in another
10364 2009-01-07 Stan Shebs <stan@codesourcery.com>
10366 * config/pa/linux.mh (XDEPFILES): Remove.
10368 2009-01-07 Doug Evans <dje@google.com>
10370 * cli/cli-cmds.c (set_debug): Fix cut-n-paste error.
10372 2009-01-07 Jan Kratochvil <jan.kratochvil@redhat.com>
10374 * f-typeprint.c (f_type_print_base <TYPE_CODE_STRUCT>): Fix output
10375 spacing, a regression from 2008-04-22.
10377 2009-01-07 Joel Brobecker <brobecker@adacore.com>
10379 * utils.c (gdb_print_host_address): Adjust implementation to
10380 reuse host_address_to_string. Move comment explaining the conversion
10381 from host address to string from here...
10382 (host_address_to_string): ... to there.
10384 2009-01-07 Emi Suzuki <emi-suzuki@tjsys.co.jp>
10386 * MAINTAINERS: Add myself for write after approval privileges.
10388 2009-01-06 Tom Tromey <tromey@redhat.com>
10390 * value.c (set_internalvar): Use value_free, not xfree.
10392 2009-01-06 Jim Blandy <jimb@red-bean.com>
10394 Check return values of functions declared with warn_unused_result
10395 attribute in GLIBC 2.8.
10396 * cli/cli-cmds.c (pwd_command): Check return value from getcwd.
10397 * inflow.c (check_syscall): New function.
10398 (new_tty): Use check_syscall to check return values from open and dup.
10399 * linux-nat.c (linux_nat_info_proc_cmd): Check return value from fgets.
10400 * main.c (captured_main): Call cwd after setting up gdb_stderr;
10401 check for errors from getcwd.
10402 * mi/mi-cmd-env.c (mi_cmd_env_pwd): Check return value from getcwd.
10403 * ui-file.c (stdio_file_write): Ignore return value from fwrite.
10404 (stdio_file_fputs): Same.
10405 * utils.c (internal_vproblem): abort if last-ditch error message
10408 * top.c (gdb_init): Don't set the current directory here; that's
10409 already been done in captured_main.
10411 2009-01-06 Sandra Loosemore <sandra@codesourcery.com>
10413 * ser-tcp.c: Adjust includes.
10414 (tcp_set_cmdlist, tcp_show_cmdlist): Declare.
10415 (tcp_auto_retry, tcp_retry_limit): Declare.
10416 (TIMEOUT): Remove, in favor of tcp_retry_limit.
10417 (POLL_INTERVAL): Increase to 5, in favor of backoff logic.
10418 (wait_for_connect): New function.
10419 (net_open): Use it. Add auto-retry logic.
10420 (set_tcp_cmd, show_tcp_cmd): New functions.
10421 (_initialize_ser_tcp): Initialize new "set/show tcp auto-retry"
10422 and "set/show tcp connect-timeout" commands.
10423 * NEWS: Document new commands.
10425 2009-01-05 Tom Tromey <tromey@redhat.com>
10427 * python/python-internal.h (Py_ssize_t): Define as int.
10429 2009-01-05 Jim Blandy <jimb@red-bean.com>
10431 * MAINTAINERS: Fix my e-mail address as steering committee member.
10433 2009-01-03 Joel Brobecker <brobecker@adacore.com>
10435 Updated copyright notices for most files.
10437 2009-01-03 Joel Brobecker <brobecker@adacore.com>
10439 * top.c (print_gdb_version): Update copyright year.
10441 2009-01-03 Joel Brobecker <brobecker@adacore.com>
10443 * config/djgpp/fnchange.lst: Add entry for ChangeLog-2008.
10445 2009-01-01 Pedro Alves <pedro@codesourcery.com>
10447 PR breakpoints/9681:
10448 * exceptions.h (enum errors): New error type, MEMORY_ERROR.
10449 * corefile.c (memory_error): Rewrite to throw a MEMORY_ERROR.
10450 * breakpoint.c (fetch_watchpoint_value): Ignore MEMORY_ERRORs, but
10451 retrow all other exceptions.
10453 For older changes see ChangeLog-2008.
10459 version-control: never