1 2011-03-04 Michael Snyder <msnyder@vmware.com>
4 * infcall.c (call_function_by_hand): Add break statements for lint.
7 * cli/cli-script.c (script_from_file): Add break for lint.
9 2011-03-04 Michael Snyder <msnyder@vmware.com>
11 * solib.c (reload_shared_libraries_1): Close memory leak.
13 2011-03-03 Tom Tromey <tromey@redhat.com>
16 * dwarf2read.c (process_psymtab_comp_unit): Handle case where
19 2011-03-03 Michael Snyder <msnyder@vmware.com>
21 * remote-fileio.c (remote_fileio_func_fstat): Initialize all
22 fields of struct 'st' to zero.
24 * tui/tui-winsource.c (tui_update_source_window_as_is): Initialize
25 sal.pspace before calling set_current_source_symtab_and_line.
27 2011-03-03 Yao Qi <yao@codesourcery.com>
29 * Makefile.in (configure-common): Remove. Let Makefile
30 in dir common to rebuild itself.
31 (common/Makefile): Likewise.
33 2011-03-03 Joel Brobecker <brobecker@adacore.com>
35 * utils.c (parse_escape): Add i18n markup in error message.
37 2011-03-03 Yao Qi <yao@codesourcery.com>
39 * gdb/arm-tdep.c (shifted_reg_val): Replace magic number 15 with
41 (thumb_get_next_pc_raw, arm_get_next_pc_raw): Likewise.
42 (displaced_write_reg, displaced_read_reg): Likewise.
43 (copy_ldr_str_ldrb_strb, cleanup_block_load_all): Likewise.
44 (cleanup_block_load_pc, copy_block_xfer): Likewise.
45 (cleanup_branch): Replace magic number 14 and 15 with
46 ARM_LR_REGNUM and ARM_PC_REGNUM respectively.
48 2011-03-02 Michael Snyder <msnyder@vmware.com>
50 * maint.c (maintenance_do_deprecate): No need to check for NULL.
52 * cli/cli-script.c (script_from_file): Add break for lint.
54 * mdebugread.c (parse_partial_symbols): Fix indent.
56 * gdbserver/linux-arm-low.c (arm_arch_setup): Replace malloc
59 * target-descriptions.c (tdesc_gdb_type): No need to call
60 xstrdup, callee saves a copy.
62 * printcmd.c (print_scalar_formatted): Use strncpy for safety.
64 * infcall.c (call_function_by_hand): Add break statements for lint.
66 * utils.c (parse_escape): Escape the escape char.
68 * python/py-inferior.c (build_inferior_list): Error out if
70 (gdbpy_inferiors): Error out if build_inferior_list fails.
72 * linux-nat.c (linux_nat_xfer_partial): Preserve errno around
75 * record.c (record_restore): Move printf to before error return.
77 2011-03-02 Yao Qi <yao@codesourcery.com>
79 * arm-tdep.h (struct displaced_step_closure): Add two new fields
80 is_thumb and insn_size.
81 * arm-tdep.c (displaced_read_reg): Adjust correct pipeline offset
82 on both ARM and Thumb mode.
83 (arm_process_displaced_insn): Set is_thumb and insn_size.
84 (arm_displaced_init_closure): Handle both 16-bit and 32-bit.
85 (arm_displaced_step_fixup): Likewise.
87 2011-03-01 Michael Snyder <msnyder@vmware.com>
89 * cli/cli-dump.c (dump_bfd_file): Check error return and warn.
91 * jv-lang.c (evaluate_subexp_java): Conditional can't be true.
93 * dwarf2read.c (dwarf2_compute_name): NAME cannot be null here.
95 * cli/cli-dump.c (restore_binary_file): Validate ftell return value.
97 * ada-lang.c (ada_make_symbol_completion_list): Replace malloc
100 * ada-lang.c (aggregate_assign_others): Rename inner scope variable
101 which shadows function parameter.
103 * tracepoint.c (create_tsv_from_upload): Superfluous call
104 to xstrdup. Callee already calls xstrdup.
106 * linespec.c (decode_line_1): Remove unnecessary null check.
108 * tracepoint.c (scope_info): Fix mem leak, remove underused
111 * python/py-prettyprint.c (apply_val_pretty_printer): Remove
112 superfluous null check.
114 * std-regs.c (value_of_builtin_frame_pc_reg): Frame can't be null.
115 (value_of_builtin_frame_fp_reg): Ditto.
117 * event-top.c (display_gdb_prompt): Remove superfluous null check.
119 * python/py-prettyprint.c (apply_val_pretty_printer): VAL may
122 * linespec.c (decode_line_1): Check for null before dereference.
124 * reverse.c (record_restore): Move null-check to before pointer
127 * python/py-utils.c (gdbpy_obj_to_string): Delete unused variable.
129 * objc-lang.c (selectors_info): Add explanitory comment.
130 (classes_info): Ditto.
132 2011-03-01 Ulrich Weigand <ulrich.weigand@linaro.org>
134 * arm-linux-tdep.c (ARM_LDR_PC_SP_4): Add define.
135 (arm_linux_restart_syscall_init): Handle both on-stack and in-kernel
136 versions of the trampoline. Handle Thumb vs. ARM addresses.
137 (arm_kernel_linux_restart_syscall_tramp_frame): New global.
138 (arm_linux_init_abi): Install it.
139 * arm-tdep.c (arm_psr_thumb_bit): Make global.
140 * arm-tdep.c (arm_psr_thumb_bit): Add prototype.
142 2011-02-28 Michael Snyder <msnyder@vmware.com>
144 * ui-out.c (ui_out_field_core_addr): Make local char buffer
145 a little bigger, to avoid possibility of an overflow.
147 * breakpoint.c (breakpoint_adjustment_warning): Make local char
148 buffers a little bigger, to avoid possibility of an overflow.
150 * coffread.c (coff_getfilename): Add check to avoid overflow.
152 * objc-lang.c (selectors_info): Add a small safety margin to
154 (classes_info): Error out on too long REGEXP.
156 * infrun.c (handle_inferior_event): Remove unused function call.
158 * fork-child.c (fork_inferior): Remove ifdef'd code and
161 * linux-thread-db.c (attach_thread): Discard unused value.
163 * linux-nat.c (linux_handle_extended_wait): Delete unused variable.
165 * remote.c (remote_get_noisy_reply): Discard unused value.
166 (remote_vcont_resume): Ditto.
167 (remote_stop_ns): Ditto.
169 * linespec.c (decode_objc): Delete unused variable.
171 * tui/tui-regs.c (tui_register_format): Delete unused variable.
173 * dwarf2read.c (add_partial_symbol): Discard unused values.
174 (read_base_type): Delete unused variable.
176 * dbxread.c (read_dbx_symtab): Discard unused value.
178 * eval.c (evaluate_subexp_standard): Delete unused variable,
179 and discard unused values.
181 * infcmd.c (_initialize_infcmd): Discard unused values.
183 * stabsread.c (rs6000_builtin_type): Missing break statement.
185 * dbxread.c (process_one_symbol): Discard unused value.
187 * coffread.c (coff_end_symtab): Delete unused variable.
189 * dwarf2read.c (dw2_get_file_names): Discard unused value.
190 (dwarf2_add_typedef): Delete unused variable.
191 (read_namespace): Ditto.
192 (dwarf_decode_macros): Ditto.
194 * m2-lang.c (evaluate_subexp_modula2): Discard unused variable.
196 * opencl-lang.c (evaluate_subexp_opencl): Discard unused value.
198 * p-valprint.c (pascal_val_print): Discard unused value.
200 * utils.c (nquery): Call va_end before return;
204 * proc-service.c (ps_plog): Call va_end before return.
206 2011-02-28 Tom Tromey <tromey@redhat.com>
208 * python/python.c (gdbpy_value_cst): New global.
209 (_initialize_python): Initialize it.
210 * python/python-internal.h (gdbpy_value_cst): Declare.
211 * python/py-value.c (convert_value_from_python): Use
214 2011-02-28 Michael Snyder <msnyder@vmware.com>
216 * python/py-cmd.c (cmdpy_init): Fix memory leak.
218 * breakpoint.c (catch_syscall_completer): Free malloced list.
220 * jv-lang.c (java_primitive_type_from_name): Add missing break.
222 * opencl-lang.c (lval_func_check_validity): Rename inner variables.
223 (lval_func_check_synthetic_pointer): Ditto.
224 (lval_func_free_closure): Fix use-after-free.
226 2011-02-28 Tom Tromey <tromey@redhat.com>
228 * psymtab.c (expand_partial_symbol_tables): Use
229 ALL_OBJFILE_PSYMTABS.
231 2011-02-28 Jan Kratochvil <jan.kratochvil@redhat.com>
233 * objc-lang.c (selectors_info): Error on too long REGEXP.
235 2011-02-28 Michael Snyder <msnyder@vmware.com>
237 * python/py-param.c (set_parameter_value): Add missing
240 * linux-record.c (record_linux_system_call): Add missing
243 2011-02-28 Ulrich Weigand <uweigand@de.ibm.com>
245 * breakpoint.c (print_one_breakpoint_location): Remove unused
246 argument PRINT_ADDRESS_BITS. Update callers.
247 (print_one_breakpoint): Likewise.
249 2011-02-28 Ulrich Weigand <uweigand@de.ibm.com>
251 * breakpoint.c (wrap_indent_at_field): New function.
252 (print_breakpoint_location): Use it instead of WRAP_INDENT argument.
253 Allocate ui_stream locally instead of using STB argument.
254 (print_one_breakpoint_location): Update call.
255 * ui-out.c (ui_out_query_field): New function.
256 * ui-out.h (ui_out_query_field): Add prototype.
258 2011-02-28 Joel Brobecker <brobecker@adacore.com>
260 From Michael Snyder <msnyder@vmware.com>
261 * ada-exp.y (write_object_renaming): Add FALLTHROUGH comment.
263 2011-02-27 Michael Snyder <msnyder@vmware.com>
265 * objc-lang.c (selectors_info): Prevent string overrun.
267 * tui/tui-stack.c (tui_get_function_from_frame): Fix off by one
270 * symtab.c (rbreak_command): Move variable 'file_name' to
273 * d-valprint.c (dynamic_array_type): Avoid shadowing a function
274 param with a local variable of the same name.
276 2011-02-27 Michael Snyder <msnyder@vmware.com>
278 * value.c (value_from_history_ref): New function.
279 * value.h (value_from_history_ref): Export.
280 * cli/cli-utils.c (get_number_trailer): Use value_from_history_ref
281 to parse value history references.
282 * cli/cli-utils.h (get_number_trailer): Update comment.
284 2011-02-27 Michael Snyder <msnyder@vmware.com>
286 * inferior.c (detach_inferior_command): Use get_number_or_range.
287 (kill_inferior_command): Ditto.
288 (remove_inferior_command): Ditto.
289 (initialize_inferiors): Make command names plural.
292 2011-02-27 Michael Snyder <msnyder@vmware.com>
294 * darwin-nat-info.c: Fix comment typo.
295 * dwarf2expr.h: Ditto.
298 * frame-unwind.h: Ditto.
300 * hppa-hpux-tdep.c: Ditto.
301 * i386-linux-nat.c: Ditto.
302 * linux-nat.c: Ditto.
305 * ppc-linux-tdep.c: Ditto.
308 * tui/tui-winsource.c: Ditto.
310 2011-02-26 Michael Snyder <msnyder@vmware.com>
312 * breakpoint.c (reattach_breakpoints): Avoid resource leak (ui_file).
314 * maint.c (maintenance_do_deprecate): Plug a memory leak.
316 * dwarf2loc.c (insert_bits): Avoid shadowing a function param
317 with a local variable of the same name.
319 * i387-tdep.c (i387_supply_fxsave): Avoid shadowing a function
320 param with a local variable of the same name.
321 (i387_supply_xsave): Ditto.
323 * linux-low.c (linux_nat_xfer_osdata): Rename local variable so
324 that it does not shadow a function parameter.
326 * i386-nat.c (i386_length_and_rw_bits): Document that case
327 statement is meant to fall through.
329 * expprint.c (dump_subexp_body_standard): Document that case
330 statement is meant to fall through.
332 * amd64-linux-tdep.c (amd64_linux_syscall_record): Delete
333 dead if statement. Condition can't be false.
335 2011-02-25 Michael Snyder <msnyder@vmware.com>
337 * arm-tdep.c: Fix typos in comments.
338 * bsd-uthread.c: Ditto.
339 * completer.c: Ditto.
341 * cp-namespace.c: Ditto.
342 * cp-support.c: Ditto.
343 * cris-tdep.c: Ditto.
345 * dwarf2read.c: Ditto.
349 * mdebugread.c: Ditto.
350 * mips-tdep.c: Ditto.
351 * ppc-linux-nat.c: Ditto.
352 * ppc-linux-tdep.c: Ditto.
354 * sol-thread.c: Ditto.
355 * solib-frv.c: Ditto.
357 * sparc64-tdep.c: Ditto.
359 * stabsread.c: Ditto.
364 * python/py-block.c: Ditto.
365 * python/py-symbol.c: Ditto.
366 * python/py-symtab.c: Ditto.
367 * python/py-value.c: Ditto.
368 * tui/tui-win.c: Ditto.
370 2011-02-25 Michael Snyder <msnyder@vmware.com>
372 * inferior.c (print_inferior): Accept a string instead of an int
373 for requested_inferiors, and use get_number_or_range to parse it.
374 (info_inferiors_command): Pass args string to print_inferior.
375 (initialize_inferiors): Change help string for info inferiors.
376 * inferior.h (print_inferior): Export prototype change.
378 2011-02-25 Tom Tromey <tromey@redhat.com>
380 * common/ax.def (invalid2): Set to 0x31.
382 2011-02-25 Jan Kratochvil <jan.kratochvil@redhat.com>
384 * dwarf2loc.c (disassemble_dwarf_expression) <DW_OP_breg[0-9]+>: Use
386 (disassemble_dwarf_expression) <DW_OP_bregx>: Drop variable offset,
388 (disassemble_dwarf_expression) <DW_OP_fbreg>: Use L and plongest.
390 2011-02-24 Michael Snyder <msnyder@vmware.com>
392 * Makefile.in (clean): Make clean should remove generated files
393 observer.h and observer.inc.
395 2011-02-24 Joel Brobecker <brobecker@adacore.com>
397 Revert the following patch (not approved yet):
398 2011-02-21 Hui Zhu <teawater@gmail.com>
399 * Makefile.in (HFILES_NO_SRCDIR): Add printcmd.h.
400 * ax-gdb.c (gen_printf_expr_callback): New function.
401 * ax-gdb.h (gen_printf_expr_callback): Forward declare.
402 * ax-general.c (ax_memcpy): New function.
403 (ax_print): Handle "printf".
405 * ax.h (ax_memcpy): Forward declare.
406 * common/ax.def (invalid2): Removed.
408 * printcmd.c (printcmd.h): New include.
409 (string_printf): New function.
410 (ui_printf): Removed.
411 (printf_command): Remove static. Call string_printf.
412 (eval_command): Call string_printf.
413 * printcmd.h: New file.
414 * tracepoint.c (validate_actionline,
415 encode_actions_1): handle printf_command.
417 2011-02-23 Tom Tromey <tromey@redhat.com>
419 * ax-general.c (ax_pick): Add missing newline.
421 2011-02-23 Michael Snyder <msnyder@vmware.com>
423 * breakpoint.c (breakpoint_1): Change first argument from an int
424 to a char pointer, so that the function now accepts a list of
425 breakpoints rather than just one. Use new function
426 'number_is_in_list' to implement.
427 (breakpoints_info): Pass char * instead of int to breakpoint_1.
428 (watchpoints_info): Ditto.
429 (tracepoints_info): Ditto.
430 (maintenance_info_breakpoints): Ditto.
431 (_initialize_breakpoint): Update help strings to reflect the fact
432 that these functions can now take more than one argument.
433 * cli/cli-utils.c (number_is_in_list): New function.
434 * cli/cli-utils.h (number_is_in_list): Export.
436 2011-02-23 Michael Snyder <msnyder@vmware.com>
438 * memattr.c (mem_enable_command): Use get_number_or_range.
439 (mem_disable_command): Ditto.
440 (mem_delete_command): Ditto.
441 (_initialize_mem): Tweak usage message to reflect multiple
444 2011-02-22 Doug Evans <dje@google.com>
446 Add gdb.lookup_global_symbol python function.
448 * python/py-symbol.c (gdbpy_lookup_global_symbol): New function.
449 * python/python-internal.h (gdbpy_lookup_global_symbol): Declare it.
450 * python/python.c (GdbMethods): Add entry for lookup_global_symbol.
452 2011-02-22 Tom Tromey <tromey@redhat.com>
454 * language.c (language_class_name_from_physname): Rename
455 'curr_language' argument to 'lang'; use in body.
457 2011-02-22 Michael Snyder <msnyder@vmware.com>
459 * cli/cli-utils.c (number_is_in_list): Check for zero return.
461 2011-02-22 Pedro Alves <pedro@codesourcery.com>
463 * frame-unwind.h: Fix comment to mention the this frame, not the
466 2011-02-22 Tom Tromey <tromey@redhat.com>
468 * symfile.c (auto_solib_limit): Remove.
469 * symfile.h (auto_solib_limit): Remove.
471 2011-02-22 Joel Brobecker <brobecker@adacore.com>
473 * Makefile.in (INSTALLED_LIBS): Delete. Update comment.
475 2011-02-21 Michael Snyder <msnyder@vmware.com>
477 * gdbthread.h (print_thread_info): Change prototype.
478 * thread.c (print_thread_info): Accept char* instead of int for
479 requested_threads argument. Use new function number_is_in_list
480 to determine which threads to list.
481 (info_threads_command): Pass char* to print_thread_info.
482 * cli/cli-utils.c (number_is_in_list): New function.
483 * cli/cli-utils.h (number_is_in_list): Export.
484 * mi/mi-main.c (mi_cmd_thread_info): Pass char* to
486 (print_one_inferior): Ditto.
487 (mi_cmd_list_thread_groups): Ditto.
489 2011-02-21 Jan Kratochvil <jan.kratochvil@redhat.com>
491 * common/Makefile.in (CFLAGS): New.
492 (COMPILE): Add $(CFLAGS).
494 2011-02-21 Tom Tromey <tromey@redhat.com>
496 * breakpoint.c (catch_syscall_command_1): Fix typo.
498 2011-02-21 Tom Tromey <tromey@redhat.com>
500 * reverse.c: Include cli-utils.h.
501 * printcmd.c: Include cli-utils.h.
502 (string_printf): Use skip_spaces.
503 * cli/cli-utils.h: New file.
504 * cli/cli-utils.c: New file.
505 * cli/cli-dump.h (skip_spaces): Move to cli-utils.h.
506 * cli/cli-dump.c (skip_spaces): Move to cli-utils.c.
507 * breakpoint.h (get_number, get_number_or_range): Move to
509 * breakpoint.c: Include cli-utils.h.
510 (get_number_trailer, get_number, get_number_or_range)
511 (ep_skip_leading_whitespace): Move to cli-utils.c.
512 (create_breakpoint_sal, find_condition_and_thread)
513 (decode_static_tracepoint_spec, watch_command_1)
514 (watch_maybe_just_location, ep_parse_optional_if_clause)
515 (catch_fork_command_1, catch_exec_command_1)
516 (catch_syscall_command_1): Use skip_spaces, skip_to_space.
517 * Makefile.in (SUBDIR_CLI_OBS): Add cli-utils.o.
518 (SUBDIR_CLI_SRCS): Add cli-utils.c.
519 (HFILES_NO_SRCDIR): Add cli-utils.h.
520 (cli-utils.o): New target.
522 2011-02-18 Pierre Muller <muller@ics.u-strasbg.fr>
524 * remote.c (remote_close): Reset INFERIOR_PTID to NULL_PTID
525 before calling discard_all_inferiors.
527 2011-02-21 Ulrich Weigand <uweigand@de.ibm.com>
529 * opencl-lang.c (STRUCT_OCL_TYPE): Remove.
530 (struct builtin_opencl_type): Remove.
531 (builtin_opencl_type): Change return type to "struct type **".
532 (lookup_opencl_vector_type): Update caller.
533 (opencl_language_arch_info): Copy primitive type vector from gdbarch.
534 (build_opencl_types): Install plain array of "struct type *"
535 instead of "struct builtin_opencl_type".
537 2011-02-21 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
538 Ulrich Weigand <uweigand@de.ibm.com>
540 * arm-linux-nat.c: Include "observer.h" and "gdbthread.h".
541 (PTRACE_GETHBPREGS, PTRACE_SETHBPREGS): Define.
542 (struct arm_linux_hwbp_cap): New type.
543 (arm_linux_get_hwbp_cap): New function.
544 (arm_linux_get_hw_breakpoint_count): Likewise.
545 (arm_linux_get_hw_watchpoint_count): Likewise.
546 (arm_linux_can_use_hw_breakpoint): Likewise.
547 (arm_hwbp_type): New type.
548 (arm_hwbp_control_t): Likewise.
549 (struct arm_linux_hw_breakpoint): Likewise.
550 (struct arm_linux_thread_points): Likewise.
551 (arm_threads): New global variable.
552 (arm_linux_find_breakpoints_by_tid): New function.
553 (arm_hwbp_control_initialize): Likewise.
554 (arm_hwbp_control_is_enabled): Likewise.
555 (arm_hwbp_control_disable): Likewise.
556 (arm_linux_hw_breakpoint_initialize): Likewise.
557 (arm_linux_get_hwbp_type): Likewise.
558 (arm_linux_hw_watchpoint_initialize): Likewise.
559 (arm_linux_hw_breakpoint_equal): Likewise.
560 (arm_linux_insert_hw_breakpoint1): Likewise.
561 (arm_linux_remove_hw_breakpoint1): Likewise.
562 (arm_linux_insert_hw_breakpoint): Likewise.
563 (arm_linux_remove_hw_breakpoint): Likewise.
564 (arm_linux_region_ok_for_hw_watchpoint): Likewise.
565 (arm_linux_insert_watchpoint): Likewise.
566 (arm_linux_remove_watchpoint): Likewise.
567 (arm_linux_stopped_data_address): Likewise.
568 (arm_linux_stopped_by_watchpoint): Likewise.
569 (arm_linux_watchpoint_addr_within_range): Likewise.
570 (arm_linux_new_thread): Likewise.
571 (arm_linux_thread_exit): Likewise.
572 (_initialize_arm_linux_nat): Install hardware breakpoint/watchpoint
573 related target callbacks. Register arm_linux_new_thread and
574 arm_linux_thread_exit.
575 * arm-tdep.h (arm_pc_is_thumb): Add prototype.
576 * arm-tdep.c (arm_pc_is_thumb): Make global.
577 (arm_gdbarch_init): Call set_gdbarch_have_nonsteppable_watchpoint.
579 2011-02-21 Ulrich Weigand <uweigand@de.ibm.com>
581 * breakpoint.c (update_watchpoint): Do not attempt to recreate
582 per-frame locations while within a function epilogue.
584 2011-02-21 Pierre Muller <muller@ics.u-strasbg.fr>
586 * ser-mingw.c (ser_windows_close): Reformat comment to better conform
587 to GNU coding standards.
589 2011-02-21 Pierre Muller <muller@ics.u-strasbg.fr>
591 Allow use of mingw native on Windows 95 OS.
592 * ser-mingw.c (CancelIo): New macro for dynamically loaded DLL entry.
593 (ser_windows_close): Only call CancelIo if function exists.
594 (_initialize_ser_windows): Use LoadLirary/GetProcAddress
595 to check for existence of CancelIo function in kernel32 DLL.
597 2011-02-21 Hui Zhu <teawater@gmail.com>
599 * Makefile.in (HFILES_NO_SRCDIR): Add printcmd.h.
600 * ax-gdb.c (gen_printf_expr_callback): New function.
601 * ax-gdb.h (gen_printf_expr_callback): Forward declare.
602 * ax-general.c (ax_memcpy): New function.
603 (ax_print): Handle "printf".
605 * ax.h (ax_memcpy): Forward declare.
606 * common/ax.def (invalid2): Removed.
608 * printcmd.c (printcmd.h): New include.
609 (string_printf): New function.
610 (ui_printf): Removed.
611 (printf_command): Remove static. Call string_printf.
612 (eval_command): Call string_printf.
613 * printcmd.h: New file.
614 * tracepoint.c (validate_actionline,
615 encode_actions_1): handle printf_command.
617 2011-02-19 Michael Snyder <msnyder@vmware.com>
619 * reverse.c (delete_one_bookmark): Argument is now bookmark
620 id rather than pointer to bookmark struct.
621 (delete_bookmark_command): Use get_number_or_range.
622 (goto_bookmark_command): Parse with get_number instead of strtoul.
623 (bookmark_1): New function. Print info for one bookmark.
624 (bookmarks_info): Use get_number_or_range and bookmark_1.
626 2011-02-18 Michael Snyder <msnyder@vmware.com>
628 * thread.c (info_threads_command): Re-implement using
630 (thread_apply_command): Ditto.
632 2011-02-18 Tom Tromey <tromey@redhat.com>
634 * common/ax.def: New file.
635 * ax.h (enum agent_op): Use ax.def.
636 * ax-general.c (aop_map): Use ax.def.
638 2011-02-18 Tom Tromey <tromey@redhat.com>
640 * ax-general.c (aop_map): Add pick and rot.
641 * dwarf2loc.c (compile_dwarf_to_ax) <DW_OP_over>: Reimplement.
642 <DW_OP_rot>: Implement.
643 * ax.h (enum agent_op) <aop_pick, aop_rot>: New constants.
645 * ax-general.c (ax_pick): New function.
647 2011-02-18 Tom Tromey <tromey@redhat.com>
649 * Makefile.in (HFILES_NO_SRCDIR): Don't mention ada-operator.inc.
651 2011-02-18 Jan Kratochvil <jan.kratochvil@redhat.com>
652 Tom Tromey <tromey@redhat.com>
654 * cp-support.c (make_symbol_overload_list_namespace): Do not call
655 make_symbol_overload_list_block with NULL BLOCK.
656 * valarith.c (unop_user_defined_p): Resolve also TYPE_CODE_TYPEDEF.
658 2011-02-18 Pedro Alves <pedro@codesourcery.com>
660 * breakpoint.c (get_number_trailer): No longer accept a NULL PP.
661 * breakpoint.h (get_number_or_range): Declare.
662 * printcmd.c (ALL_DISPLAYS): Declare.
663 (delete_display): Reimplement taking a display pointer.
664 (undisplay_command): Accept a range of displays to delete, using
667 2011-02-18 Pierre Muller <muller@ics.u-strasbg.fr>
669 * c-valprint.c (c_val_print): Add embedded_offset to address
670 for arrays of unspecified length.
671 * p-valprint.c (pascal_val_print): Likewise.
673 2011-02-18 Yao Qi <yao@codesourcery.com>
675 * gdb/arm-tdep.c (arm_displaced_step_copy_insn): Move code to ...
676 (arm_process_displaced_insn): .. here. Remove parameter INSN.
677 (thumb_process_displaced_insn): New.
678 * gdb/arm-linux-tdep.c (arm_linux_displaced_step_copy_insn): Update
679 call to arm_process_displaced_insn.
680 * gdb/arm-tdep.h : Update declaration of arm_process_displaced_insn.
682 2011-02-17 Tom Tromey <tromey@redhat.com>
684 * dwarf2loc.h (dwarf2_compile_expr_to_ax): Declare.
685 * dwarf2loc.c (dwarf2_compile_expr_to_ax): Rename from
686 compile_dwarf_to_ax. No longer static. Call
687 dwarf2_compile_cfa_to_ax.
688 (locexpr_tracepoint_var_ref): Update.
689 (loclist_tracepoint_var_ref): Update.
690 * dwarf2-frame.h (dwarf2_compile_cfa_to_ax): Declare.
691 * dwarf2-frame.c (execute_cfa_program): Remove 'this_frame'
692 argument; add 'gdbarch' and 'pc'.
693 (dwarf2_compile_cfa_to_ax): New function.
694 (dwarf2_frame_cache): Update.
696 2011-02-17 Joel Brobecker <brobecker@adacore.com>
698 * ada-lang.c (ada_type_of_array): Fix the size of the array
699 in the case of an unconstrained packed array.
701 2011-02-17 Yao Qi <yao@codesourcery.com>
703 * common/Makefile.in: Add more targets for make.
705 2011-02-16 Tom Tromey <tromey@redhat.com>
707 * dwarf2loc.c (unimplemented): Fix typo.
709 2011-02-16 Tom Tromey <tromey@redhat.com>
711 * dwarf2loc.c (unimplemented): Handle unnamed opcodes.
712 (compile_dwarf_to_ax) <default>: Use unimplemented.
713 <DW_OP_deref>: Update.
714 (disassemble_dwarf_expression): Update.
715 * dwarf2read.c (dwarf_stack_op_name): Remove 'def' argument.
716 (decode_locdesc): Update.
717 * dwarf2expr.h (dwarf_stack_op_name): Update.
719 2011-02-16 Tom Tromey <tromey@redhat.com>
721 * ax.h (struct aop_map) <name>: Now const.
723 2011-02-16 Tom Tromey <tromey@redhat.com>
725 * ax-gdb.c.c (gen_expr) <UNOP_MEMVAL>: Handle value kinds other
728 2011-02-16 Yao Qi <yao@codesourcery.com>
730 * infrun.c (get_displaced_step_closure_by_addr): New.
731 * inferior.h: Declare it.
732 * arm-tdep.c: (arm_pc_is_thumb): Call
733 get_displaced_step_closure_by_addr. Adjust MEMADDR if it
736 2011-02-16 Pedro Alves <pedro@codesourcery.com>
737 Jan Kratochvil <jan.kratochvil@redhat.com>
740 * tracepoint.c (memrange_sortmerge): Fix list A's end calculation.
742 2011-02-16 Pedro Alves <pedro@codesourcery.com>
743 Jan Kratochvil <jan.kratochvil@redhat.com>
745 * value.c (value_contents_copy_raw): Extend describing comment.
746 Assert that the destination contents we're overwriting are wholly
748 (value_contents_copy): Extend describing comment.
750 2011-02-16 Pedro Alves <pedro@codesourcery.com>
751 Jan Kratochvil <jan.kratochvil@redhat.com>
753 * value.c (value_available_contents_eq): Remove redundant local
754 variables. Fix available contents comparision.
755 * value.h (value_available_contents_eq): Extend describing
758 2011-02-16 Yao Qi <yao@codesourcery.com>
760 * thread.c (info_threads_command): Add missing i18n markup and remove
763 2011-02-15 Paul Pluzhnikov <ppluzhnikov@google.com>
765 * breakpoint.c (longjmp_names): New variable.
766 (struct breakpoint_objfile_data): New type.
767 (breakpoint_objfile_key): New variable.
768 (msym_not_found): New variable.
769 (msym_not_found_p): New predicate.
770 (get_breakpoint_objfile_data): New function.
771 (create_overlay_event_breakpoint): Check per-objfile cache for
773 (create_longjmp_master_breakpoint): Likewise.
774 (create_std_terminate_master_breakpoint): Likewise.
775 (create_exception_master_breakpoint): Likewise.
776 (_initialize_breakpoint): Register per-objfile data key.
778 2011-02-15 Paul Pluzhnikov <ppluzhnikov@google.com>
780 * breakpoint.c ((create_overlay_event_breakpoint): Const-propagate
782 (create_longjmp_master_breakpoint): Loop over longjmp names.
783 (create_std_terminate_master_breakpoint): Const-propagate parameter
785 (update_breakpoints_after_exec): Adjust.
786 (breakpoint_re_set): Adjust.
788 2011-02-15 Michael Snyder <msnyder@vmware.com>
790 * thread.c (info_threads_command): Process arg as thread id,
791 or list of thread ids.
792 (thread_find_command): New command.
793 (_initialize_thread): Document argument for info threads.
794 Document 'thread find' command.
795 * NEWS: Document new command "thread find".
797 2011-02-15 Jan Kratochvil <jan.kratochvil@redhat.com>
799 * Makefile.in (ACLOCAL_AMFLAGS): Add `-I ../config'.
800 * aclocal.m4: Regenerated with aclocal-1.11.1.
801 * common/configure: Regenerate with autoconf-2.64.
803 2011-02-15 Ken Werner <ken.werner@de.ibm.com>
805 * opencl-lang.c (build_opencl_types): Set the size of the built-in
806 bool data type to a size of one byte.
808 2011-02-15 Pedro Alves <pedro@codesourcery.com>
809 Jan Kratochvil <jan.kratochvil@redhat.com>
811 * target.c (memory_xfer_live_readonly_partial): Document where to
812 look for interface description.
814 2011-02-15 Yao Qi <yao@codesourcery.com>
817 * arm-tdep.c (copy_ldr_str_ldrb_strb): Replace PC with SP in
818 order to store PC value on stack instead of text section.
820 2011-02-15 Thiago Jung Bauermann <bauerman@br.ibm.com>
822 * rs6000-tdep.c (IS_EFP_PSEUDOREG): Use correct constant for
823 the EFP register set size.
824 (efpr_pseudo_register_read): Use regcache_raw_read_part to read
825 data from the VMX register.
826 (efpr_pseudo_register_write): Use regcache_raw_write_part to read
827 and write data from/to the VMX register.
829 2011-02-14 Michael Snyder <msnyder@vmware.com>
831 * command.h (enum command_class): New class 'no_set_class', for
832 "show" commands without a corresponding "set" command.
833 * value.c (_initialize_values): Use 'no_set_class' for "show values".
834 * copying.c (_initialize_copying): Ditto for "show copying" and
836 * cli/cli-cmds.c (init_cli_cmds): Ditto for "show commands" and
838 * cli/cli-setshow.c (cmd_show_list): Skip "show" commands for
839 which there is no corresponding "set" command (eg. "show copying").
841 2011-02-14 Pedro Alves <pedro@codesourcery.com>
842 Jan Kratochvil <jan.kratochvil@redhat.com>
844 * exec.c (section_table_available_memory): Change `len' parameter
846 * exec.h (section_table_available_memory): Ditto.
847 * value.h (read_value_memory): Rename the `offset' parameter to
850 2011-02-14 Pedro Alves <pedro@codesourcery.com>
851 Jan Kratochvil <jan.kratochvil@redhat.com>
853 * memrange.c (compare_mem_ranges): Mention sort order in
855 (normalize_mem_ranges): Add comment. Fix ra->length calculation.
856 * tracepoint.c (traceframe_available_memory): Extend comment to
857 mention what happens to RESULT when the target does not support
860 2011-02-14 Pedro Alves <pedro@codesourcery.com>
861 Jan Kratochvil <jan.kratochvil@redhat.com>
863 * value.c (mark_value_bytes_unavailable): Fix indexing the `bef'
866 2011-02-14 Pedro Alves <pedro@codesourcery.com>
868 * value.c (value_bits_valid, value_bits_synthetic_pointer):
869 No longer handle NULL values.
871 2011-02-14 Pedro Alves <pedro@codesourcery.com>
873 * exceptions.h (NOT_AVAILABLE_ERROR): New error.
874 * value.c: Include "exceptions.h".
875 (require_available): Throw NOT_AVAILABLE_ERROR instead of a
877 * cp-abi.c: Include gdb_assert.h.
878 (baseclass_offset): Add `embedded_offset' and `val' parameters.
879 Assert the method is implemented. Wrap NOT_AVAILABLE_ERROR
881 * cp-abi.h (baseclass_offset): Add `embedded_offset' and `val'
882 parameters. No longer returns -1 on error.
883 (struct cp_abi_ops) <baseclass_offset>: Add `embedded_offset' and
885 * cp-valprint.c: Include exceptions.h.
886 (cp_print_value): Handle NOT_AVAILABLE_ERROR errors when fetching
887 the baseclass_offset. Handle unavailable base classes. Use
888 val_print_invalid_address.
889 * p-valprint.c: Include exceptions.h.
890 (pascal_object_print_value): Handle NOT_AVAILABLE_ERROR errors
891 when fetching the baseclass_offset. No longer expect
892 baseclass_offset returning -1. Handle unavailable base classes.
893 Use val_print_invalid_address.
894 * valops.c (dynamic_cast_check_1): Rename `contents' parameter to
895 `valaddr' parameter, and change its type to gdb_byte pointer. Add
896 `embedded_offset' and `val' parameters. Adjust.
897 (dynamic_cast_check_2): Rename `contents' parameter to `valaddr'
898 parameter, and change its type to gdb_byte pointer. Add
899 `embedded_offset' and `val' parameters. Adjust. No longer expect
900 baseclass_offset returning -1.
901 (value_dynamic_cast): Use value_contents_for_printing rather than
902 value_contents. Adjust.
903 (search_struct_field): No longer expect baseclass_offset returning
905 (search_struct_method): If reading memory from the target is
906 necessary, wrap it in a new value to pass to baseclass_offset. No
907 longer expect baseclass_offset returning -1.
908 (find_method_list): No longer expect baseclass_offset returning
909 -1. Use value_contents_for_printing rather than value_contents.
910 * valprint.c (val_print_invalid_address): New function.
911 * valprint.h (val_print_invalid_address): Declare.
912 * gdbtypes.c (is_unique_ancestor_worker): New `embedded_offset'
913 and `val' parameters. No longer expect baseclass_offset returning
915 * gnu-v2-abi.c: Include "exceptions.h".
916 (gnuv2_baseclass_offset): Add `embedded_offset' and `val'
917 parameters. Handle unavailable memory. Recurse through
918 gnuv2_baseclass_offset directly, rather than through
919 baseclass_offset. No longer returns -1 on not found, instead
921 * gnu-v3-abi.c (gnuv3_baseclass_offset): Add `embedded_offset' and
922 `val' parameters. Adjust.
924 2011-02-14 Pedro Alves <pedro@codesourcery.com>
926 * tracepoint.c (memrange_sortmerge): Don't merge ranges that are
927 almost but not quite adjacent.
929 2011-02-14 Pedro Alves <pedro@codesourcery.com>
931 * value.h (value_entirely_available): Declare.
932 * value.c (value_entirely_available): New function.
933 * c-valprint.c (c_value_print): Don't try fetching the pointer's
934 real type if the pointer is unavailable.
936 2011-02-14 Pedro Alves <pedro@codesourcery.com>
938 * valops.c (value_repeat): Use read_value_memory instead of
941 2011-02-14 Pedro Alves <pedro@codesourcery.com>
943 * value.h (value_contents_copy, value_contents_copy_raw): Declare.
944 * value.c (value_contents_copy_raw, value_contents_copy): New
946 (value_primitive_field): Use value_contents_copy_raw instead of
948 * valops.c (value_fetch_lazy): Use value_contents_copy instead of
950 (value_array, value_slice): Ditto.
951 * valarith.c (value_subscripted_rvalue): Use
952 value_contents_copy_raw instead of memcpy.
954 2011-02-14 Pedro Alves <pedro@codesourcery.com>
956 <unavailable> references.
958 * valops.c (get_value_at): Use value_from_contents_and_address,
959 avoiding read_memory.
961 2011-02-14 Pedro Alves <pedro@codesourcery.com>
963 * c-valprint.c (c_val_print): Print a string with unavailable
964 contents as an array.
966 2011-02-14 Pedro Alves <pedro@codesourcery.com>
968 * value.h (unpack_bits_as_long): Delete declaration.
969 (unpack_value_bits_as_long): Declare.
970 (unpack_value_field_as_long): Declare.
971 (value_field_bitfield): Declare.
972 * value.c (unpack_bits_as_long): Rename to...
973 (unpack_value_bits_as_long_1): ... this. Add embedded_offset and
974 value parameters. Return the extracted result in a new output
975 parameter. If the value contents are unavailable, return false,
976 otherwise return true.
977 (unpack_value_bits_as_long): New.
978 (unpack_field_as_long): Rename to...
979 (unpack_value_field_as_long_1): ... this. Add embedded_offset and
980 Add embedded_offset and value parameters. Return the extracted
981 result in a new output parameter. If the value contents are
982 unavailable, return false, otherwise return true.
983 (unpack_value_field_as_long): New.
984 (unpack_field_as_long_1): New.
985 (unpack_field_as_long): Reimplement as wrapper around
986 unpack_value_field_as_long_1.
987 (value_field_bitfield): New function.
988 * valops.c (value_fetch_lazy): When fetching a bitfield, use
989 unpack_value_bits_as_long. Mark the value as unavailable, if it
991 * jv-valprint.c (java_print_value_fields): Use
992 value_field_bitfield.
993 * p-valprint.c (pascal_object_print_value_fields): Use
994 value_field_bitfield.
995 * cp-valprint.c (cp_print_value_fields): Use value_field_bitfield.
997 2011-02-14 Pedro Alves <pedro@codesourcery.com>
999 * value.c (get_internalvar_integer): Also return the int value of
1000 TYPE_CODE_INT INTERNALVAR_VALUE values.
1001 (set_internalvar): Don't special case TYPE_CODE_INT.
1003 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1005 * value.c (struct internalvar) <enum internalvar_kind>: Remove
1006 INTERNALVAR_POINTER.
1008 (value_of_internalvar): Remove INTERNALVAR_POINTER handling.
1009 (set_internalvar): Remove special TYPE_CODE_PTR handling.
1010 (preserve_one_internalvar): Remove INTERNALVAR_POINTER handling.
1012 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1014 * value.h (value_available_contents_eq): Declare.
1015 * value.c (find_first_range_overlap): New function.
1016 (value_available_contents_eq): New function.
1017 * valprint.c (val_print_array_elements): Use
1018 value_available_contents_eq.
1019 * ada-valprint.c (val_print_packed_array_elements): Use
1020 value_available_contents_eq.
1021 * jv-valprint.c (java_value_print): Use
1022 value_available_contents_eq.
1024 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1026 * target.c (target_read_live_memory): New function.
1027 (memory_xfer_live_readonly_partial): New.
1028 (memory_xfer_partial): If reading from a traceframe, fallback to
1029 reading unavailable read-only memory from read-only regions of
1031 * tracepoint.c (disconnect_tracing): Adjust.
1032 (set_current_traceframe): New, factored out from
1033 set_traceframe_number.
1034 (set_traceframe_number): Reimplement to only change the traceframe
1035 number on the GDB side.
1036 (do_restore_current_traceframe_cleanup): Adjust.
1037 (make_cleanup_restore_traceframe_number): New.
1038 (cur_traceframe_number): New global.
1039 (tfile_open): Set cur_traceframe_number to no traceframe.
1040 (set_tfile_traceframe): New function.
1041 (tfile_trace_find): If looking up a traceframe using any method
1042 other than by number, make sure the current tfile traceframe
1043 matches gdb's current traceframe. Update the current tfile
1044 traceframe if the lookup succeeded.
1045 (tfile_fetch_registers, tfile_xfer_partial)
1046 (tfile_get_trace_state_variable_value): Make sure the remote
1047 traceframe matches gdb's current traceframe.
1048 * remote.c (remote_traceframe_number): New global.
1049 (remote_open_1): Set it to -1.
1050 (set_remote_traceframe): New function.
1051 (remote_fetch_registers, remote_store_registers)
1052 (remote_xfer_memory, remote_xfer_partial)
1053 (remote_get_trace_state_variable_value): Make sure the remote
1054 traceframe matches gdb's current traceframe.
1055 (remote_trace_find): If looking up a traceframe using any method
1056 other than by number, make sure the current remote traceframe
1057 matches gdb's current traceframe. Update the current remote
1058 traceframe if the lookup succeeded.
1059 * infrun.c (fetch_inferior_event): Adjust.
1060 * tracepoint.h (set_current_traceframe): Declare.
1061 (get_traceframe_number, set_traceframe_number): Add describing
1064 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1066 Mark pieces of values as unavailable if the corresponding memory
1069 * valops.c: Include tracepoint.h.
1070 (value_fetch_lazy): Use read_value_memory.
1071 (read_value_memory): New.
1072 * value.h (read_value_memory): Declare.
1073 * dwarf2loc.c (read_pieced_value): Use read_value_memory.
1074 * exec.c (section_table_available_memory): New function.
1075 * exec.h (section_table_available_memory): Declare.
1077 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1079 * Makefile.in (SFILES): Add memrange.c.
1080 (HFILES_NO_SRCDIR): Add memrange.h.
1081 (COMMON_OBS): Add memrange.o.
1082 * memrange.c: New file.
1083 * memrange.h: New file.
1084 * tracepoint.c: Include memrange.h.
1085 (struct mem_range): Delete.
1086 (mem_range_s): Delete.
1087 (traceframe_available_memory): New function.
1088 * tracepoint.h (traceframe_available_memory): Declare.
1090 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1092 * target.h (struct traceframe_info): Forward declare.
1093 (enum target_object): Add TARGET_OBJECT_TRACEFRAME_INFO.
1094 (struct target_ops) <to_traceframe_info>: New field.
1095 (target_traceframe_info): New.
1096 * target.c (update_current_target): Inherit and default
1098 * remote.c (PACKET_qXfer_traceframe_info): New.
1099 (remote_protocol_features): Register qXfer:traceframe-info:read.
1100 (remote_xfer_partial): Handle TARGET_OBJECT_TRACEFRAME_INFO.
1101 (remote_traceframe_info): New.
1102 (init_remote_ops): Install it.
1103 (_initialize_remote): Install "set/show remote traceframe-info"
1105 * tracepoint.h (parse_traceframe_info): Declare.
1106 * tracepoint.c (struct mem_range): New.
1107 (mem_range_s): New typedef.
1108 (struct traceframe_info): New.
1109 (traceframe_info): New global.
1110 (free_traceframe_info): New function.
1111 (clear_traceframe_info): New function.
1112 (start_tracing, tfind_1, set_traceframe_number): Clear traceframe
1114 (build_traceframe_info): New function.
1115 (tfile_traceframe_info): New function.
1116 (init_tfile_ops): Install tfile_traceframe_info.
1117 (traceframe_info_start_memory, free_result): New functions.
1118 (memory_attributes, traceframe_info_elements): New globals.
1119 (parse_traceframe_info, get_traceframe_info): New functions.
1120 * features/traceframe-info.dtd: New file.
1121 * Makefile.in (XMLFILES): Add traceframe-info.dtd.
1123 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1125 Base support for <unavailable> value contents.
1127 * value.h (value_bytes_available): Declare.
1128 (mark_value_bytes_unavailable): Declare.
1129 * value.c (struct range): New struct.
1130 (range_s): New typedef.
1131 (ranges_overlap): New function.
1132 (range_lessthan): New function.
1133 (ranges_contain_p): New function.
1134 (struct value) <unavailable>: New field.
1135 (value_bytes_available): New function.
1136 (mark_value_bytes_unavailable): New function.
1137 (require_not_optimized_out): Constify parameter.
1138 (require_available): New function.
1139 (value_contents_all, value_contents): Require all bytes be
1141 (value_free): Free `unavailable'.
1142 (value_copy): Copy `unavailable'.
1143 * valprint.h (val_print_unavailable): Declare.
1144 * valprint.c (valprint_check_validity): Rename `offset' parameter
1145 to `embedded_offset'. If printing a scalar, check whether the
1146 value chunk is available.
1147 (val_print_unavailable): New.
1148 (val_print_scalar_formatted): Check whether the value is
1150 * python/py-prettyprint.c (apply_val_pretty_printer): Refuse
1151 pretty-printing unavailable values.
1153 2011-02-13 Jan Kratochvil <jan.kratochvil@redhat.com>
1155 Fix const/volatile qualifiers of C++ types, PR c++/12328.
1156 * c-typeprint.c (c_type_print_args): Update the function comment. New
1157 variable param_type, initialize it. Remove const/volatile qualifiers
1158 for language_cplus and !show_artificial. Use param_type.
1160 2011-02-13 Jan Kratochvil <jan.kratochvil@redhat.com>
1162 * symtab.c (find_pc_sect_line): New variable objfile, initialize it
1163 from S. Iterate S using ALL_OBJFILE_SYMTABS. Verify BV for each S.
1164 * symtab.h (struct symtab) <next>: Comment extension.
1166 2011-02-12 Yao Qi <yao@codesourcery.com>
1168 * Makefile.in (CLEANDIRS): Remove duplicated common dir.
1170 2011-02-11 Yao Qi <yao@codesourcery.com>
1172 * common/Makefile.in: Add copyright header.
1174 2011-02-11 Pedro Alves <pedro@codesourcery.com>
1176 * infrun.c (proceed): Move switching out and in of tfind mode from
1178 (fetch_inferior_event): ... to here.
1180 2011-02-11 Yao Qi <yao@codesourcery.com>
1182 * Makefile.in: Remove signals.o from COMMON_OBS. Link
1184 * configure.ac: Add common to sub dir.
1185 * configure: Regenerate.
1187 2011-02-11 Yao Qi <yao@codesourcery.com>
1191 * common/Makefile.in: New.
1192 * common/configure.ac: New.
1193 * common/aclocal.m4: New.
1194 * common/configure: Generate.
1196 2011-02-10 Pedro Alves <pedro@codesourcery.com>
1198 * vec.h (VEC_block_remove): Place VEC_ASSERT_INFO on the right
1199 side of the parenthesis.
1202 2010-07-13 Jakub Jelinek <jakub@redhat.com>
1203 * vec.h (VEC_block_remove): Fix comment.
1205 2011-02-08 Michael Snyder <msnyder@vmware.com>
1207 * linux-nat.c (linux_nat_filter_event): Fix typo in comment.
1209 2011-02-08 Jan Kratochvil <jan.kratochvil@redhat.com>
1211 * i386-tdep.c (i386_process_record): Rename l suffixes to d suffixes
1212 in comments for pcmpgtd, pcmpeqd, psubd, paddd, pcmpgtd, pcmpeqd,
1215 2011-02-08 Jan Kratochvil <jan.kratochvil@redhat.com>
1218 * i386-tdep.c (i386_process_record) <0x660f3807>: Fix the comment to
1220 (i386_process_record) <lddqu>: Fix the opcode to 0xf20ff0.
1221 (i386_process_record) <0x0f3807>: Fix the comment to phsubsw.
1223 2011-02-08 Ulrich Weigand <uweigand@de.ibm.com>
1225 * dwarf2read.c (read_subroutine_type): Set special calling
1226 convention flag for functions compiled by IBM XL C for OpenCL.
1227 * ppc-sysv-tdep.c: Include "dwarf2.h"
1228 (ppc_sysv_abi_push_dummy_call): Implement IBM OpenCL vector types
1230 (do_ppc_sysv_return_value): Add FUNC_TYPE argument. Implement
1231 IBM OpenCL vector types calling convention.
1232 (ppc_sysv_abi_return_value): Pass through FUNC_TYPE.
1233 (ppc_sysv_abi_broken_return_value): Likewise.
1234 (ppc64_sysv_abi_push_dummy_call): Implement IBM OpenCL vector
1235 types calling convention.
1236 (ppc64_sysv_abi_return_value): Likewise.
1237 * spu-tdep.c: Include "dwarf2.h"
1238 (spu_return_value): Implement IBM OpenCL vector types calling
1241 2011-02-08 Ulrich Weigand <uweigand@de.ibm.com>
1243 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): Implement
1244 correct ABI for AltiVec vector arguments.
1246 2011-02-07 Pedro Alves <pedro@codesourcery.com>
1248 * valprint.c (val_print): Extend comment.
1249 * ada-valprint.c (ada_valprint): Rewrite comment deferring
1250 interface explanation to val_print.
1251 (ada_val_print_array): Adjust comment to current interface.
1252 (print_field_values): Adjust comment to current interface.
1253 * c-valprint.c (c_val_print): Rewrite comment deferring interface
1254 explanation to val_print.
1255 * f-valprint.c (f_val_print): Ditto.
1256 * jv-valprint.c (java_val_print): Ditto.
1257 * m2-valprint.c (m2_val_print): Ditto.
1258 * p-valprint.c (pascal_val_print): Ditto.
1260 2011-02-07 Thiago Jung Bauermann <bauerman@br.ibm.com>
1262 * breakpoint.c (parse_breakpoint_sals): Fix description.
1264 2011-02-04 Sami Wagiaalla <swagiaal@redhat.com>
1265 Oguz Kayral <oguzkayral@gmail.com>
1267 * python/py-inferior.c (python_on_normal_stop): New function.
1268 (python_on_resume): New function.
1269 (python_inferior_exit): New function.
1270 (gdbpy_initialize_inferior): Add normal_stop, target_resumed, and
1271 inferior_exit observers.
1272 * python/py-evtregistry.c: New file.
1273 * python/py-threadevent.c : New file.
1274 * python/py-event.c: New file.
1275 * python/py-evts.c: New file.
1276 * python/py-continueevent.c: New file.
1277 * python/py-bpevent.c: New file.
1278 * python/py-signalevent.c: New file.
1279 * python/py-exetiedevent.c: New file.
1280 * python/py-breakpoint.c (gdbpy_breakpoint_from_bpstats): New function.
1281 Move struct breakpoint_object from here...
1282 * python/python-internal.h: ... to here.
1283 * python/py-event.h: New file.
1284 * python/py-events.h: New file.
1285 * Makefile.in (SUBDIR_PYTHON_OBS): Add py-breakpointstopevent.o,
1286 py-continueevent.o, py-event.o, py-eventregistry.o, py-events.o,
1287 py-exitedevent.o, py-signalstopevent.o, and py-stopevent.o.
1288 (SUBDIR_PYTHON_SRCS): Add py-breakpointstopevent.c,
1289 py-continueevent.c, py-event.c, py-eventregistry.c, py-events.c,
1290 py-exitedevent.c, py-signalstopevent.c, and py-stopevent.c.
1291 Add build rules for all the above.
1293 2011-02-04 Tom Tromey <tromey@redhat.com>
1295 * dwarf2read.c (dwarf2_section_empty_p): New function.
1296 (dwarf2_read_section): Use dwarf2_section_empty_p.
1297 (dwarf2_section_size): New function.
1298 (dwarf2_get_section_info): Unconditionally read section.
1299 (dwarf2_read_index): Use dwarf2_section_empty_p.
1300 (partial_read_comp_unit_head): Use dwarf2_section_size.
1301 (dwarf2_symbol_mark_computed): Likewise.
1303 2011-02-04 David Daney <ddaney@caviumnetworks.com>
1305 * NEWS: Add item for "catch syscall" on mips*-linux* targets.
1307 2011-02-04 David Daney <ddaney@caviumnetworks.com>
1309 * mips-linux-tdep.c: Include xml-syscall.h.
1310 (mips_linux_get_syscall_number): New function.
1311 (mips_linux_init_abi): Add calls to
1312 mips_linux_get_syscall_number() and set_xml_syscall_file_name().
1313 * data-directory/Makefile.in (SYSCALLS_FILES): Add
1314 mips-o32-linux.xml, mips-n32-linux.xml and mips-n64-linux.xml
1315 * syscalls/mips-n32-linux.xml: New file.
1316 * syscalls/mips-n64-linux.xml: New file.
1317 * syscalls/mips-o32-linux.xml: New file.
1319 2011-02-04 Ulrich Weigand <ulrich.weigand@linaro.org>
1321 * dwarf2read.c (dwarf2_ranges_read): Skip empty range entries.
1322 Complain about inverted range entries.
1323 (dwarf2_record_block_ranges): Likewise.
1325 2011-02-04 Thiago Jung Bauermann <bauerman@br.ibm.com>
1328 * breakpoint.c (update_watchpoint): Fix name of the
1329 update_global_location_list function.
1330 (print_one_breakpoint): Fix typo.
1331 (_initialize_breakpoint): Remove extra space in hbreak help
1333 * breakpoint.h (struct bp_location) <length>: Fix field
1336 2011-02-04 Pedro Alves <pedro@codesourcery.com>
1338 * regcache.c (registers_changed_ptid): Don't explictly always
1339 clear `current_regcache'. Only clear current_thread_ptid and
1340 current_thread_arch when PTID matches. Only reinit the frame
1341 cache if PTID matches the current inferior_ptid. Move alloca(0)
1343 (registers_changed): ... here.
1345 2011-02-03 Ulrich Weigand <ulrich.weigand@linaro.org>
1347 * arm-tdep.c (arm_skip_stack_protector): Accept any symbol that
1348 starts with __stack_chk_guard as stack guard symbol.
1350 2011-02-03 Andrew Burgess <aburgess@broadcom.com>
1352 * disasm.c (compare_lines): Handle the end of sequence markers
1353 within the line table to better support disassembling over
1354 compilation unit boundaries.
1356 2011-02-02 Ulrich Weigand <ulrich.weigand@linaro.org>
1358 * arm-tdep.c (skip_prologue_function): Add GDBARCH and IS_THUMB
1359 arguments. Skip in-prologue calls to glibc __aeabi_read_tp
1360 implementation even if no symbols are available.
1361 (thumb_analyze_prologue): Update call to skip_prologue_function.
1362 (arm_analyze_prologue): Likewise.
1364 2011-02-02 Ulrich Weigand <ulrich.weigand@linaro.org>
1366 * arm-tdep.c: Include "observer.h".
1367 (arm_prologue_this_id): Use frame PC if get_frame_func returns 0.
1368 (arm_exidx_data_key): New static variable.
1369 (struct arm_exidx_entry, arm_exidx_entry_s): New data types.
1370 (struct arm_exidx_data): Likewise.
1371 (arm_exidx_data_free): New function.
1372 (arm_compare_exidx_entries): Likewise.
1373 (arm_obj_section_from_vma): Likewise.
1374 (arm_exidx_new_objfile): Likewise.
1375 (arm_find_exidx_entry): Likewise.
1376 (arm_exidx_fill_cache): Likewise.
1377 (arm_exidx_unwind_sniffer): Likewise.
1378 (arm_exidx_unwind): New global variable.
1379 (arm_gdbarch_init): Append unwinder arm_exidx_unwind.
1380 (_initialize_arm_tdep): Attach arm_exidx_new_objfile to new_objfile
1381 observer. Register arm_exidx_data_key as objfile data.
1383 2011-02-02 Ulrich Weigand <ulrich.weigand@linaro.org>
1385 * arm-tdep.c (arm_analyze_load_stack_chk_guard): Avoid build break
1386 due to accessing uninitialized variable. Fix indentation.
1388 2011-02-02 Pedro Alves <pedro@codesourcery.com>
1390 * c-valprint.c (c_value_print): When doing virtual base pointer
1391 adjustment, create a new value with adjusted contents rather than
1392 changing the contents of the value being printed (and getting it
1395 2011-02-02 Pedro Alves <pedro@codesourcery.com>
1397 * xml-support.c (xml_find_attribute): New.
1398 (xinclude_start_include): Use it.
1399 * xml-support.h (xml_find_attribute): Declare.
1400 * memory-map.c (memory_map_start_memory)
1401 (memory_map_start_property): Use xml_find_attribute.
1402 * osdata.c (osdata_start_osdata, osdata_start_column): Use
1404 * remote.c (start_thread): Use xml_find_attribute.
1405 * solib-target.c (library_list_start_segment)
1406 (library_list_start_section, library_list_start_library)
1407 (library_list_start_list): Use xml_find_attribute.
1408 * xml-tdesc.c (tdesc_start_target, tdesc_start_feature)
1409 (tdesc_start_union, tdesc_start_struct, tdesc_start_flags)
1410 (tdesc_start_field): Use xml_find_attribute.
1412 2011-02-02 Ulrich Weigand <uweigand@de.ibm.com>
1414 * opencl-lang.c (STRINGIFY): Rename to OCL_STRING.
1415 (BUILD_OCL_VTYPES): Update.
1417 2011-02-02 Joel Brobecker <brobecker@adacore.com>
1419 * configure.ac: Work around non-GNU sed limitation when computing
1420 python version number.
1421 * configure: Regenerate.
1423 2011-02-01 Jan Kratochvil <jan.kratochvil@redhat.com>
1425 Fix debug printing of TYPE_INSTANCE.
1426 * expprint.c (print_subexp_standard) <TYPE_INSTANCE>: New.
1427 (dump_subexp_body_standard) <TYPE_INSTANCE>: New.
1429 2011-02-01 Jan Kratochvil <jan.kratochvil@redhat.com>
1431 Fix debug printing of BINOP_IN, OP_OBJC_MSGCALL,
1432 OP_F77_UNDETERMINED_ARGLIST, OP_COMPLEX, OP_OBJC_SELECTOR, OP_NAME,
1433 OP_OBJC_NSSTRING, OP_F90_RANGE and OP_DECFLOAT.
1434 * ada-operator.inc: Rename the file to ...
1435 * ada-operator.def: ... here, wrap all the entries by macro OP.
1436 * expprint.c (op_name_standard): Remove all the entries. Include
1437 "std-operator.def" instead.
1438 * expression.h (enum exp_opcode): Include "std-operator.def" and
1439 "ada-operator.def". Move all the entries ...
1440 * std-operator.def: ... here, wrap all the entries by macro OP.
1442 2011-01-31 Paul Pluzhnikov <ppluzhnikov@google.com>
1444 * breakpoint.h (remove_jit_event_breakpoints): New prototype.
1445 * breakpoint.c (remove_jit_event_breakpoints): New function.
1446 * jit.c (jit_descriptor_addr): Delete.
1447 (registering_code): Delete.
1448 (clear_int): Delete.
1449 (jit_inferior_data): New variable.
1450 (struct jit_inferior_data): New type.
1451 (get_jit_inferior_data): New function.
1452 (jit_inferior_data_cleanup): New function.
1453 (jit_read_descriptor): Adjust.
1454 (jit_register_code): Adjust.
1455 (jit_breakpoint_re_set_internal): New function; move code here ...
1456 (jit_inferior_init): ... from here.
1457 (jit_breakpoint_re_set): Adjust.
1458 (jit_reset_inferior_data_and_breakpoints): New function.
1459 (jit_inferior_created_observer): Adjust.
1460 (jit_inferior_exit_hook): Adjust.
1461 (jit_executable_changed_observer): New function.
1462 (jit_event_handler): Adjust.
1463 (_initialize_jit): Adjust.
1465 2011-01-31 Michael Snyder <msnyder@vmware.com>
1467 * m32r-tdep.c (m32r_gdbarch_init): Replace accidentally deleted
1470 2011-01-31 Tom Tromey <tromey@redhat.com>
1473 * python/python.c (execute_gdb_command): Call
1474 prevent_dont_repeat.
1475 * top.c (suppress_dont_repeat): New global.
1476 (dont_repeat): Use it.
1477 (prevent_dont_repeat): New function.
1478 * command.h (prevent_dont_repeat): Declare.
1480 2011-01-31 Tom Tromey <tromey@redhat.com>
1482 * infcmd.c (finish_backward): Use breakpoint_set_silent.
1483 * python/py-breakpoint.c (bppy_set_silent): Use
1484 breakpoint_set_silent.
1485 (bppy_set_thread): Use breakpoint_set_thread.
1486 (bppy_set_task): Use breakpoint_set_task.
1487 * breakpoint.h (breakpoint_set_silent, breakpoint_set_thread)
1488 (breakpoint_set_task): Declare.
1489 (make_breakpoint_silent): Remove.
1490 * breakpoint.c (breakpoint_set_silent): New function.
1491 (breakpoint_set_thread): Likewise.
1492 (breakpoint_set_task): Likewise.
1493 (make_breakpoint_silent): Remove.
1495 2011-01-31 Tom Tromey <tromey@redhat.com>
1497 * breakpoint.h (user_breakpoint_p): Declare.
1498 * breakpoint.c (user_breakpoint_p): New function.
1499 (breakpoint_1): Use it.
1500 (save_breakpoints): Likewise.
1502 2011-01-31 Joel Brobecker <brobecker@adacore.com>
1504 * configure.ac: Add handling of Python distribution on Windows.
1505 * python-config.py: If the LIBS, SYSLIBS, LIBPL and/or LINKFORSHARED
1506 sysconfig variables are not defined, then do not use them.
1507 On Windows, if LIBPL is not defined, then use prefix + '/libs'
1508 instead. On Windows, return all paths using forward-slashes
1509 rather than backslashes.
1511 2011-01-31 Joel Brobecker <brobecker@adacore.com>
1513 * configure.ac: Remove fallback behavior for building
1514 against Python. Remove tweaking of Python include path.
1515 Add PYTHON_CPPFLAGS and PYTHON_LIBS substitution.
1516 (AC_TRY_LIBPYTHON): Adjust program used in linking test.
1517 If link is successful, set PYTHON_CPPFLAGS and PYTHON_LIBS.
1518 Always restore CPPFLAGS and LIBS after linking test.
1519 * configure: Regenerated.
1520 * Makefile.in (INTERNAL_CPPFLAGS): Add @PYTHON_CPPFLAGS@.
1521 (INSTALLED_LIBS, CLIBS): Add @PYTHON_LIBS@.
1522 * python/python-internal.h: Adjust includes of Python .h files.
1524 2011-01-31 Joel Brobecker <brobecker@adacore.com>
1526 * tracepoint.c (traceframe_walk_blocks): Add missing i18n markup
1529 2011-01-31 Joel Brobecker <brobecker@adacore.com>
1531 * inflow.c (gdb_has_a_terminal): Fix typo in interactive_mode
1534 2011-01-31 Yao Qi <yao@codesourcery.com>
1536 * arm-linux-nat.c: Update calls to regcache_register_status
1537 instead of regcache_valid_p.
1538 * aix-thread.c: Likewise.
1539 * i386gnu-nat.c: Likewise.
1541 2011-01-29 Jan Kratochvil <jan.kratochvil@redhat.com>
1544 * valops.c (compare_parameters): Verify TYPE_NFIELDS before
1545 touching TYPE_FIELD_ARTIFICIAL.
1547 2011-01-28 Richard Earnshaw <rearnsha@arm.com>
1549 * MAINTAINERS: Move myself from Responsible Maintainers to Authorized
1552 2011-01-28 Pedro Alves <pedro@codesourcery.com>
1554 * tracepoint.c (tfile_xfer_partial): If there's no traceframe
1555 selected, don't try iterating over the traceframe's blocks.
1556 (tfile_has_stack): If there's no traceframe selected, then there's
1558 (tfile_has_registers): If there's no traceframe selected, then
1559 there's no registers.
1561 2011-01-28 Pedro Alves <pedro@codesourcery.com>
1563 * target.c (memory_xfer_partial): No need to restore shadows if we
1564 haven't read anything.
1566 2011-01-28 Pedro Alves <pedro@codesourcery.com>
1568 * mips-tdep.c (mips_print_register): Use get_frame_register_value
1569 and val_print_scalar_formatted.
1571 2011-01-27 Pedro Alves <pedro@codesourcery.com>
1573 * tracepoint.c (tfile_read): New.
1574 (tfile_open): Use it.
1575 (tfile_get_traceframe_address): Use it.
1576 (tfile_trace_find): Use it.
1577 (walk_blocks_callback_func): New typedef.
1578 (match_blocktype): New function.
1579 (traceframe_walk_blocks): New function.
1580 (traceframe_find_block_type): New function.
1581 (tfile_fetch_registers, tfile_xfer_partial)
1582 (tfile_get_trace_state_variable_value): Use
1583 traceframe_find_block_type and tfile_read.
1585 2011-01-26 Kevin Buettner <kevinb@redhat.com>
1587 * remote-mips.c: Add internationalization mark ups. Remove
1588 trailing \n from already marked up strings.
1590 2011-01-26 Tom Tromey <tromey@redhat.com>
1592 * python/py-prettyprint.c (print_string_repr): Clear
1593 'addressprint' option when calling val_print_string.
1594 (print_children): Handle Val_pretty_default. Clear 'addressprint'
1595 option when calling val_print_string.
1597 2011-01-26 Tom Tromey <tromey@redhat.com>
1599 * python/python.c (gdbpy_solib_name): Use gdb_py_longest and
1601 * python/python-internal.h (GDB_PY_LL_ARG, GDB_PY_LLU_ARG): New
1603 (gdb_py_longest, gdb_py_ulongest): New typedefs.
1604 (gdb_py_long_from_longest, gdb_py_long_from_ulongest)
1605 (gdb_py_long_as_ulongest): New defines.
1606 (gdb_py_object_from_longest, gdb_py_object_from_ulongest)
1607 (gdb_py_int_as_long): Declare.
1608 * python/py-value.c (valpy_lazy_string): Use gdb_py_longest,
1609 GDB_PY_LL_ARG, gdb_py_object_from_longest.
1610 (valpy_long): Add comment.
1611 * python/py-utils.c (get_addr_from_python): Use
1612 gdb_py_long_as_ulongest. Handle overflow properly.
1613 (gdb_py_object_from_longest): New function.
1614 (gdb_py_object_from_ulongest): Likewise.
1615 (gdb_py_int_as_long): Likewise.
1616 * python/py-type.c (typy_array): Use gdb_py_int_as_long.
1617 * python/py-symtab.c (salpy_get_pc): Use
1618 gdb_py_long_from_ulongest.
1619 (salpy_get_line): Use PyInt_FromLong.
1620 * python/py-param.c (set_parameter_value): Use
1622 * python/py-lazy-string.c (stpy_get_address): Use
1623 gdb_py_long_from_ulongest.
1624 * python/py-frame.c (frapy_pc): Use gdb_py_long_from_ulongest.
1625 * python/py-cmd.c (cmdpy_completer): Use gdb_py_int_as_long.
1626 * python/py-breakpoint.c (bppy_set_thread): Use
1628 (bppy_set_task): Likewise.
1629 (bppy_set_ignore_count): Likewise.
1630 (bppy_set_hit_count): Likewise.
1631 * python/py-block.c (blpy_get_start): Use
1632 gdb_py_object_from_ulongest.
1633 (blpy_get_end): Likewise.
1634 (gdbpy_block_for_pc): Use gdb_py_ulongest and GDB_PY_LLU_ARG.
1636 2011-01-25 Mathieu Lacage <mathieu.lacage@inria.fr>
1639 * gdb/objfiles.h (struct objfile) <addr_low>: New field.
1640 * gdb/solib.c (solib_read_symbols): Check for addr_low in
1641 equality test for objfile, initialize addr_low if needed.
1643 2011-01-25 Pedro Alves <pedro@codesourcery.com>
1645 * tui/tui-regs.c (tui_register_format): Remove dead code.
1647 2011-01-25 Pedro Alves <pedro@codesourcery.com>
1649 * printcmd.c (print_formatted): Use val_print_scalar_formatted
1650 instead of print_scalar_formatted.
1651 (print_scalar_formatted): Don't handle 's' format strings here,
1652 and add an assertion that we never see such format here.
1653 * valprint.h (val_print_scalar_formatted): Declare.
1654 * valprint.c (val_print_scalar_formatted): New.
1655 * c-valprint.c (c_val_print): Use val_print_scalar_formatted
1656 instead of print_scalar_formatted.
1657 * jv-valprint.c (java_val_print): Ditto.
1658 * p-valprint.c (pascal_val_print): Ditto.
1659 * ada-valprint.c (ada_val_print_1): Ditto.
1660 * f-valprint.c (f_val_print): Ditto.
1661 * infcmd.c (registers_info): Ditto.
1662 * m2-valprint.c (m2_val_print): Ditto.
1664 2011-01-25 Pedro Alves <pedro@codesourcery.com>
1666 * m2-valprint.c (print_unbounded_array): Pass
1667 value_contents_for_printing rather than value_contents, to
1668 m2_print_array_contents. Also pass in the value.
1670 2011-01-25 Jan Kratochvil <jan.kratochvil@redhat.com>
1672 * dwarf2read.c (dwarf2_read_index, write_psymtabs_to_index)
1673 (save_gdb_index_command): Switch to .gdb_index version 4.
1675 2011-01-25 Pedro Alves <pedro@codesourcery.com>
1677 * mi/mi-main.c (get_register): Use get_frame_register_value rather
1678 than frame_register, and always pass a valid value to val_print.
1680 2011-01-25 Pedro Alves <pedro@codesourcery.com>
1682 Centralize printing "<optimized out>".
1684 * valprint.h (val_print_optimized_out): Declare.
1685 * cp-valprint.c (cp_print_value_fields): Use
1686 val_print_optimized_out.
1687 * jv-valprint.c (java_print_value_fields): Ditto.
1688 * p-valprint.c (pascal_object_print_value_fields): Ditto.
1689 * printcmd.c (print_formatted): Ditto.
1690 * valprint.c (valprint_check_validity): Ditto.
1691 (value_check_printable): Ditto.
1692 (val_print_optimized_out): New.
1694 2011-01-25 Pedro Alves <pedro@codesourcery.com>
1696 * infcmd.c (default_print_registers_info): Allocate values so to
1697 never pass a NULL value to val_print.
1699 2011-01-25 Pedro Alves <pedro@codesourcery.com>
1701 * cp-valprint.c (cp_print_value): Treat the 'skip' local as
1702 boolean. Make sure to always pass a value that matches the
1703 contents buffer to callees. Preserve `address' for following
1705 * value.c (value_contents_for_printing_const): New.
1706 (value_address): Constify value argument.
1707 * value.h (value_contents_for_printing_const): Declare.
1708 (value_address): Constify value argument.
1710 2011-01-25 Pedro Alves <pedro@codesourcery.com>
1712 * regcache.c (struct regcache_descr): Rename
1713 sizeof_raw_register_valid_p field to sizeof_raw_register_status,
1714 and sizeof_cooked_register_valid_p to
1715 sizeof_cooked_register_status.
1716 (init_regcache_descr): Adjust.
1717 (struct regcache): Rename register_valid_p field to
1719 (regcache_xmalloc_1, regcache_xfree, regcache_save)
1720 (do_cooked_read): Adjust.
1721 (regcache_valid_p): Rename to ...
1722 (regcache_register_status): ... this. Adjust.
1723 (regcache_invalidate): Adjust.
1724 (regcache_raw_read, regcache_cooked_read, regcache_raw_write):
1726 (regcache_raw_supply): Adjust. If buf i NULL, mark the register
1727 as unavailable, not valid.
1728 (regcache_dump): Adjust.
1729 * regcache.h (enum register_status): New.
1730 (regcache_register_status): Declare.
1731 (regcache_invalidate): Delete declaration.
1732 * corelow.c (get_core_registers): Adjust.
1733 * tracepoint.c (tfile_fetch_registers): Adjust.
1734 * trad-frame.c (REG_VALUE): Rename to ...
1735 (TF_REG_VALUE): ... this.
1736 (REG_UNKNOWN): Rename to ...
1737 (TF_REG_UNKNOWN): ... this.
1738 (trad_frame_set_value, trad_frame_set_unknown): Adjust.
1739 * mi/mi-main.c (register_changed_p): Adjust.
1741 2011-01-25 Pedro Alves <pedro@codesourcery.com>
1743 * regcache.c (struct regcache_descr): Remove outdated comment.
1744 (init_regcache_descr): Remove sizeof_raw_register_valid_p
1746 (regcache_xmalloc): Rename to ...
1747 (regcache_xmalloc_1): ... this. Add `readonly_p' parameter.
1748 Allocate the regcache type accordingly.
1749 (regcache_xmalloc): New as wrapper around regcache_xmalloc_1.
1750 (regcache_xfree): Asser the source is also readonly. Copy sizeof
1751 cooked registers, not raw.
1752 (regcache_dup_no_passthrough): Delete.
1753 (get_thread_arch_regcache): Use regcache_xmalloc_1.
1754 * h8300-tdep.c (h8300_push_dummy_call): Tweak comment to not
1755 mention obsolete write_register_bytes.
1756 * regcache.h (regcache_dup_no_passthrough): Delete declaration.
1758 2011-01-25 Pedro Alves <pedro@codesourcery.com>
1760 Stop remote_read_bytes from handling partial reads itself.
1762 * remote-fileio.c: Include target.h.
1763 (remote_fileio_write_bytes): Delete.
1764 (remote_fileio_func_open, remote_fileio_func_write)
1765 (remote_fileio_func_rename, remote_fileio_func_unlink): Use
1767 (remote_fileio_func_stat): Use target_read_memory and
1768 target_write_memory.
1769 (remote_fileio_func_gettimeofday): Use target_write_memory.
1770 (remote_fileio_func_system): Use target_read_memory.
1771 * remote.c (remote_write_bytes): Make it static.
1772 (remote_read_bytes): Don't handle partial reads here.
1773 * remote.h (remote_read_bytes): Delete declaration.
1775 2011-01-25 Pedro Alves <pedro@codesourcery.com>
1777 Simplify XML parsing a bit.
1779 * xml-support.h (gdb_xml_parse_quick): Declare.
1780 * xml-support.c (gdb_xml_create_parser_and_cleanup_1): Renamed
1781 from gdb_xml_create_parser_and_cleanup, and added `old_chain'
1783 (gdb_xml_create_parser_and_cleanup): Reimplement on top of
1784 gdb_xml_create_parser_and_cleanup_1.
1785 (gdb_xml_parse_quick): New.
1786 * memory-map.c (parse_memory_map): Use gdb_xml_parse_quick.
1787 * osdata.c (osdata_parse): Ditto.
1788 * remote.c (remote_threads_info): Ditto.
1789 * solib-target.c (solib_target_parse_libraries): Ditto.
1790 * xml-syscall.c (syscall_parse_xml): Ditto.
1791 * xml-tdesc.c (tdesc_parse_xml): Ditto.
1793 2011-01-24 Kevin Buettner <kevinb@redhat.com>
1795 * configure.tgt (mips*-*-elf): New; just like mips*-*-*, but
1796 with remote-mips.o added to gdb_target_obs.
1797 * Makefile.in (ALL_TARGET_OBS): Add remote-mips.o.
1799 2011-01-24 Pedro Alves <pedro@codesourcery.com>
1801 * ada-valprint.c (val_print_packed_array_elements): Pass the
1802 correct struct value to val_print.
1803 (ada_val_print_1): Ditto.
1805 2011-01-24 Pedro Alves <pedro@codesourcery.com>
1807 Don't lose embedded_offset in printing routines throughout.
1809 * valprint.h (val_print_array_elements): Change prototype.
1810 * valprint.c (val_print_array_elements): Add `embedded_offset'
1811 parameter, and adjust to pass it down to val_print, while passing
1812 `valaddr' or `address' unmodified. Take embedded_offset into
1813 account when checking repetitions.
1814 * c-valprint.c (c_val_print): Pass embedded_offset to
1815 val_print_array_elements instead of adjusting `valaddr' and
1817 * m2-valprint.c (m2_print_array_contents, m2_val_print): Pass
1818 embedded_offset to val_print_array_elements instead of adjusting
1820 * p-lang.h (pascal_object_print_value_fields): Adjust prototype.
1821 * p-valprint.c (pascal_val_print): Pass embedded_offset to
1822 val_print_array_elements and pascal_object_print_value_fields
1823 instead of adjusting `valaddr'.
1824 (pascal_object_print_value_fields): Add `offset' parameter, and
1826 (pascal_object_print_value): Add `offset' parameter, and adjust to
1828 (pascal_object_print_static_field): Use
1829 value_contents_for_printing/value_embedded_offset, rather than
1831 * ada-valprint.c (val_print_packed_array_elements): Add `offset'
1832 parameter, and adjust to use it. Use
1833 value_contents_for_printing/value_embedded_offset, rather than
1835 (ada_val_print): Rename `valaddr0' parameter to `valaddr'.
1836 (ada_val_print_array): Add `offset' parameter, and adjust to use
1838 (ada_val_print_1): Rename `valaddr0' parameter to `valaddr', and
1839 `embedded_offset' to `offset'. Don't re-adjust `valaddr'.
1840 Instead work with offsets. Use
1841 value_contents_for_printing/value_embedded_offset, rather than
1842 value_contents. Change `defer_val_int' local type to CORE_ADDR,
1843 and use value_from_pointer to extract a target pointer, rather
1844 than value_from_longest.
1845 (print_variant_part): Add `offset' parameter. Replace
1846 `outer_valaddr' parameter by a new `outer_offset' parameter.
1847 Don't re-adjust `valaddr'. Instead pass down adjusted offsets.
1848 (ada_value_print): Use
1849 value_contents_for_printing/value_embedded_offset, rather than
1851 (print_record): Add `offset' parameter, and adjust to pass it
1853 (print_field_values): Add `offset' parameter. Replace
1854 `outer_valaddr' parameter by a new `outer_offset' parameter.
1855 Don't re-adjust `valaddr'. Instead pass down adjusted offsets.
1856 Use value_contents_for_printing/value_embedded_offset, rather than
1858 * d-valprint.c (dynamic_array_type): Use
1859 value_contents_for_printing/value_embedded_offset, rather than
1861 * jv-valprint.c (java_print_value_fields): Add `offset' parameter.
1862 Don't re-adjust `valaddr'. Instead pass down adjusted offsets.
1863 (java_print_value_fields): Take `offset' into account. Don't
1864 re-adjust `valaddr'. Instead pass down adjusted offsets.
1865 (java_val_print): Take `embedded_offset' into account. Pass it to
1866 java_print_value_fields.
1867 * f-valprint.c (f77_print_array_1): Add `embedded_offset'
1868 parameter. Don't re-adjust `valaddr' or `address'. Instead pass
1869 down adjusted offsets.
1870 (f77_print_array): Add `embedded_offset' parameter. Pass it down.
1871 (f_val_print): Take `embedded_offset' into account.
1873 2011-01-21 Joel Brobecker <brobecker@adacore.com>
1875 * inflow.c: Include "gdbcmd.h".
1876 (interactive_mode): New static global, moved here from top.c.
1877 (show_interactive_mode): New function, moved here from top.c.
1878 use gdb_has_a_terminal instead of input_from_terminal_p to
1879 determine the current mode.
1880 (gdb_has_a_terminal): Add handling of the "iteractive-mode"
1882 (_initialize_inflow): Add the "set/show interactive-mode"
1883 commands. Moved here from top.c, after having adjusted slightly
1885 * top.c (interactive_mode, show_interactive_mode): Delete, moved
1887 (input_from_terminal_p): Remove handling of "interactive-mode"
1888 setting, moved to infow.c.
1889 (init_main): Remove creation of the "set/show interactive-mode"
1890 commands, moved to inflow.c.
1892 2011-01-19 Joel Brobecker <brobecker@adacore.com>
1894 * NEWS: Add entry for native ia64-hpux support.
1896 2011-01-19 Tom Tromey <tromey@redhat.com>
1899 * thread.c (free_thread): Free 'name'.
1900 (print_thread_info): Emit thread name. Change CLI output.
1901 (thread_name_command): New function.
1902 (do_captured_thread_select): Emit newline.
1903 (_initialize_thread): Register 'thread name' command.
1904 * target.h (struct target_ops) <to_thread_name>: New field.
1905 (target_thread_name): New macro.
1906 * target.c (update_current_target): Handle to_thread_name.
1907 * python/py-infthread.c (thpy_get_name): New function.
1908 (thpy_set_name): Likewise.
1909 (thread_object_getset): Add "name".
1910 * linux-nat.c (linux_nat_thread_name): New function.
1911 (linux_nat_add_target): Set to_thread_name.
1912 * gdbthread.h (struct thread_info) <name>: New field.
1914 2011-01-18 Joel Brobecker <brobecker@adacore.com>
1916 * ada-valprint.c (ada_print_scalar): Remove unsigned char downcast.
1917 (ada_val_print_1): Likewise.
1919 2011-01-18 Joel Brobecker <brobecker@adacore.com>
1921 * rs6000-tdep.c (rs6000_skip_prologue): Make sure that the prologue
1922 upper limit address is not greater than the function end address
1923 when the upper limit could not be computed using the debugging
1926 2011-01-17 Tom Tromey <tromey@redhat.com>
1928 * cli/cli-cmds.c (apropos_command): Free the compiled regex. Use
1930 * utils.c: Include gdb_regex.h.
1931 (do_regfree_cleanup): New function.
1932 (make_regfree_cleanup): Likewise.
1933 (get_regcomp_error): Likewise.
1934 * gdb_regex.h (make_regfree_cleanup, get_regcomp_error): Declare.
1936 2011-01-17 Tom Tromey <tromey@redhat.com>
1938 * cli/cli-cmds.c (apropos_command): Fix formatting. Don't call
1941 2011-01-17 Pierre Muller <muller@ics.u-strasbg.fr>
1943 * p-exp.y (intvar): New static variable, used to set CURRENT_TYPE
1944 for internal variables.
1945 (last_was_structop): New static variable.
1946 (COMPLETE): New token.
1947 (field_exp): New rule to group all '.' suffix handling.
1948 Add mark_struct_expression calls when approriate to be able
1949 to correctly find fields for completion.
1950 (yylex): Adapt to handle field completion and set INTVAR when
1953 2011-01-14 Yao Qi <yao@codesourcery.com>
1955 * arm-tdep.c (arm_register_reggroup_p): FPS register is in
1956 save_reggroup, restore_reggroup and all_reggroup.
1958 2011-01-14 Joel Brobecker <brobecker@adacore.com>
1960 * ada-valprint. (ada_printchar): Use the correct type length
1961 in call to ada_emit_char.
1962 * c-valprint.c (c_val_print): Remove cast in call to LA_PRINT_CHAR.
1964 2011-01-14 Pierre Muller <muller@ics.u-strasbg.fr>
1966 * solib-som.h (hpux_major_release): Declare variable here.
1967 * solib-som.c: Remove <sys/utsname.h> header.
1968 (DEFAULT_HPUX_MAJOR_RELEASE): New macro.
1969 (hpux_major_release): Make global, change default value to
1970 DEFAULT_HPUX_MAJOR_RELEASE.
1971 (get_hpux_major_release): Simply return HPUX_MAJOR_RELEASE.
1972 * hppa-hpux-nat.c: Add <sys/utsname.h> include.
1973 Add "solib-som.h" header.
1974 (set_hpux_major_release): New function.
1975 (_initialize_hppa_hpux_nat): Call set_hpux_major_release.
1977 2011-01-14 Mike Frysinger <vapier@gentoo.org>
1979 * configure.tgt (*-*-uclinux*): Match more Linux os targets
1981 2011-01-14 Joel Brobecker <brobecker@adacore.com>
1983 * ia64-hpux-nat.c (ia64_hpux_fetch_register): Remove trailing
1984 new-line at end of warning message.
1985 (ia64_hpux_store_register): Remove trailing new-line at end of
1987 * ia64-hpux-tdep.c: Rephrase comment.
1988 * solib-ia64-hpux.c (struct dld_info): Change type of field
1989 dld_flags from "long long" to ULONGEST.
1991 2011-01-14 Pedro Alves <pedro@codesourcery.com>
1993 * target.h (deprecated_child_ops): Delete declaration.
1994 * target.c (deprecated_child_ops): Delete definition.
1996 2011-01-14 Pedro Alves <pedro@codesourcery.com>
1998 * Makefile.in (hpux-thread.o): Delete rule.
1999 * configure.ac: Don't check for HPUX DCE threads support.
2000 * configure, config.in: Regenerate.
2001 * hppa-hpux-nat.c (child_suppress_run): Delete.
2002 (hppa_hpux_child_can_run): Delete.
2003 (_initialize_hppa_hpux_nat): Don't override to_can_run.
2004 * hpux-thread.c: Delete.
2006 2011-01-13 Joel Brobecker <brobecker@adacore.com>
2008 * hpux-thread.c (hpux_pid_to_str): Delete.
2010 2011-01-13 Joel Brobecker <brobecker@adacore.com>
2012 * ada-valprint.c (ada_emit_char): Remove strange code.
2013 Check that c is <= UCHAR_MAX before passing it to isascii.
2014 (char_at): Do not assume that TYPE_LEN is either 1 or 2.
2016 2011-01-13 Joel Brobecker <brobecker@adacore.com>
2018 * top.c (input_from_terminal_p): Restrict the use of interactive_mode
2019 to the case where instream is stdin.
2021 2011-01-13 Joel Brobecker <brobecker@adacore.com>
2023 * ia64-tdep.h (struct regcache): Forward declare.
2024 (struct ia64_infcall_ops): New struct type.
2025 (struct gdbarch_tdep): New fields "find_global_pointer_from_solib"
2027 * ia64-tdep.c (ia64_find_global_pointer_from_dynamic_section):
2028 Renames ia64_find_global_pointer.
2029 (ia64_find_global_pointer, ia64_allocate_new_rse_frame)
2030 (ia64_store_argument_in_slot, ia64_set_function_addr: New function.
2031 (ia64_push_dummy_call): Adjust to use the new tdep ia64_infocall_ops
2033 (ia64_infcall_ops): New static global constant.
2034 (ia64_gdbarch_init): Set tdep->infcall_ops.
2035 * ia64-hpux-nat.c (ia64_hpux_xfer_solib_got): New function.
2036 (ia64_hpux_xfer_partial): Add TARGET_OBJECT_HPUX_SOLIB_GOT handing.
2037 * ia64-hpux-tdep.c: Include "regcache.h", "gdbcore.h" and "inferior.h".
2038 (ia64_hpux_dummy_code): New static global constant.
2039 (ia64_hpux_push_dummy_code, ia64_hpux_allocate_new_rse_frame)
2040 (ia64_hpux_store_argument_in_slot, ia64_hpux_set_function_addr)
2041 (ia64_hpux_dummy_id, ia64_hpux_find_global_pointer_from_solib):
2043 (ia64_hpux_infcall_ops): New static global constant.
2044 (ia64_hpux_init_abi): Install gdbarch and tdep methods needed
2045 for inferior function calls to work properly on ia64-hpux.
2047 2011-01-13 Joel Brobecker <brobecker@adacore.com>
2049 * target.h (enum target_object): Add TARGET_OBJECT_HPUX_UREGS.
2050 * ia64-tdep.h (struct frame_info): forward declaration.
2051 (struct gdbarch_tdep): Add field size_of_register_frame.
2052 * ia64-tdep.c (ia64_access_reg): Use tdep->size_of_register_frame
2053 to determine the size of the register frame.
2054 (ia64_size_of_register_frame): New function.
2055 (ia64_gdbarch_init): Set tdep->size_of_register_frame.
2056 * ia64-hpux-tdep.c: Include "target.h" and "frame.h".
2057 (IA64_HPUX_UREG_REASON): New macro.
2058 (ia64_hpux_stopped_in_syscall, ia64_hpux_size_of_register_frame):
2060 (ia64_hpux_init_abi): Set tdep->size_of_register_frame.
2061 * ia64-hpux-nat.c (ia64_hpux_xfer_uregs): New function.
2062 (ia64_hpux_xfer_partial): Add handling of TARGET_OBJECT_HPUX_UREGS
2065 2011-01-13 Joel Brobecker <brobecker@adacore.com>
2067 Add support for ia64-hpux.
2068 * config/ia64/hpux.mh, ia64-hpux-nat.c, ia64-hpux-tdep.c,
2069 ia64-hpux-tdep.h, solib-ia64-hpux.c, solib-ia64-hpux.h: New files.
2071 * configure.host: Add handling for ia64-hpux hosts. Add associated
2073 * configure.tgt: Add handling for ia64-hpux targets.
2074 * Makefile.in (ALL_64_TARGET_OBS): Add ia64-hpux-tdep.o.
2075 (HFILES_NO_SRCDIR): Add ia64-hpux-tdep.h.
2076 (ALLDEPFILES): Add ia64-hpux-nat.c ia64-hpux-tdep.c.
2078 2011-01-13 Joel Brobecker <brobecker@adacore.com>
2080 [ttrace] Compute thread list immediately after attach.
2081 * inf_ttrace_attach (inf_ttrace_create_threads_after_attach):
2083 (inf_ttrace_attach): Use it.
2085 2011-01-13 Joel Brobecker <brobecker@adacore.com>
2087 * libunwind-frame.c (libunwind_frame_cache): Do not return NULL
2088 if we could not determine the frame's function address. Instead,
2089 use the frame's PC, and then continue.
2091 2011-01-13 Joel Brobecker <brobecker@adacore.com>
2093 * libunwind-frame.c (__LITTLE_ENDIAN, __BIG_ENDIAN): Define if
2094 not already defined.
2096 2011-01-13 Joel Brobecker <brobecker@adacore.com>
2098 * ia64-tdep.c (ia64_struct_type_p): New function.
2099 (ia64_extract_return_value): Handle integral values that are
2100 less than 8 bytes long.
2101 (ia64_push_dummy_call): Likewise.
2103 2011-01-13 Joel Brobecker <brobecker@adacore.com>
2105 * ia64-tdep.c (floatformat_ia64_ext_little): Renames
2106 floatformat_ia64_ext.
2107 (floatformat_ia64_ext_big): New static const.
2108 (floatformats_ia64_ext): Set first entry to &floatformat_ia64_ext_big.
2110 2011-01-12 Tom Tromey <tromey@redhat.com>
2112 * mi/mi-symbol-cmds.c (mi_cmd_symbol_list_lines): Fix error
2114 * mi/mi-main.c (mi_cmd_thread_select): Fix error messages.
2115 (mi_cmd_thread_list_ids): Likewise.
2116 (mi_cmd_data_list_changed_registers): Likewise.
2117 (mi_cmd_data_list_register_values): Likewise.
2118 (mi_cmd_data_write_register_values): Likewise.
2119 (mi_cmd_data_evaluate_expression): Likewise.
2120 (mi_cmd_data_read_memory): Likewise.
2121 (mi_cmd_data_read_memory_bytes): Likewise.
2122 (mi_cmd_data_write_memory): Likewise.
2123 (mi_cmd_enable_timings): Likewise.
2124 * mi/mi-interp.c (mi_cmd_interpreter_exec): Fix error messages.
2125 * mi/mi-cmd-var.c (mi_cmd_var_create): Fix error messages.
2126 (mi_cmd_var_delete): Likewise.
2127 (mi_cmd_var_set_format): Likewise.
2128 (mi_cmd_var_show_format): Likewise.
2129 (mi_cmd_var_info_num_children): Likewise.
2130 (mi_cmd_var_list_children): Likewise.
2131 (mi_cmd_var_info_type): Likewise.
2132 (mi_cmd_var_info_expression): Likewise.
2133 (mi_cmd_var_show_attributes): Likewise.
2134 (mi_cmd_var_assign): Likewise.
2135 (mi_cmd_var_update): Likewise.
2136 (mi_cmd_enable_pretty_printing): Likewise.
2137 (mi_cmd_var_set_update_range): Likewise.
2138 * mi/mi-cmd-target.c (mi_cmd_target_file_get): Fix error
2140 (mi_cmd_target_file_put): Likewise.
2141 (mi_cmd_target_file_delete): Likewise.
2142 * mi/mi-cmd-stack.c (mi_cmd_stack_list_frames): Fix error
2144 (mi_cmd_stack_info_depth): Likewise.
2145 (mi_cmd_stack_list_locals): Likewise.
2146 (mi_cmd_stack_list_args): Likewise.
2147 (mi_cmd_stack_select_frame): Likewise.
2148 (mi_cmd_stack_select_frame): Likewise.
2149 (mi_cmd_stack_info_frame): Likewise.
2150 * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file): Fix error
2152 (mi_cmd_file_list_exec_source_files): Likewise.
2153 * mi/mi-cmd-env.c (mi_cmd_env_pwd): Fix error messages.
2154 (mi_cmd_env_cd): Likewise.
2155 (mi_cmd_env_path): Likewise.
2156 (mi_cmd_env_dir): Likewise.
2157 (mi_cmd_inferior_tty_show): Likewise.
2158 * mi/mi-cmd-disas.c (mi_cmd_disassemble): Fix error messages.
2159 * mi/mi-cmd-break.c (mi_cmd_break_insert): Fix error messages.
2160 (mi_cmd_break_watch): Likewise.
2162 2011-01-12 Thiago Jung Bauermann <bauerman@br.ibm.com>
2164 * ppc-linux-nat.c (booke_cmp_hw_point): Fix whitespace.
2165 (ppc_linux_insert_hw_breakpoint): Likewise.
2166 (ppc_linux_remove_hw_breakpoint): Likewise.
2167 (ppc_linux_insert_watchpoint): Likewise.
2169 2011-01-12 Andrew Burgess <aburgess@broadcom.com>
2170 Jan Kratochvil <jan.kratochvil@redhat.com>
2172 PR fortran/11104 and DWARF unbound arrays detection.
2173 * dwarf2read.c (read_subrange_type): Set zero length on unspecified
2174 upper bound. Set TYPE_HIGH_BOUND_UNDEFINED if not language_ada on
2175 unspecified upper bound.
2176 * eval.c (evaluate_subexp_standard) <multi_f77_subscript>: Remove
2177 variables array_size_array, tmp_type and offset_item. New variable
2178 array. Remove call to f77_get_upperbound. New variables array_type
2179 and index. Call value_subscripted_rvalue for each dimenasion. Remove
2180 the final call to deprecated_set_value_type.
2182 2011-01-12 Jan Kratochvil <jan.kratochvil@redhat.com>
2184 Make value allocations more lazy.
2185 * ada-lang.c (coerce_unspec_val_to_type): Use allocate_value_lazy
2186 instead of allocate_value and set_value_lazy when possible.
2187 * dwarf2loc.c (dwarf2_evaluate_loc_desc_full): Use allocate_value_lazy
2188 instead of allocate_value and set_value_lazy.
2189 * findvar.c (value_of_register_lazy): Likewise.
2190 (read_var_value): Remove V preallocation, call just check_typedef in
2191 advance. Move allocate_value to LOC_CONST, LOC_LABEL,
2192 LOC_CONST_BYTES. Use allocate_value_lazy in LOC_STATIC, LOC_ARG,
2193 LOC_REF_ARG, LOC_LOCAL, LOC_BLOCK. Set ADDR instead of
2194 set_value_address and break in LOC_BLOCK. Use allocate_value_lazy and
2195 remove lval_memory set in LOC_REGPARM_ADDR. Use allocate_value_lazy
2196 in LOC_UNRESOLVED and LOC_OPTIMIZED_OUT. Add setting lval_memory at
2197 the end, remove set_value_lazy there.
2198 * valarith.c (value_subscripted_rvalue): Use allocate_value_lazy
2199 instead of allocate_value and set_value_lazy when possible.
2200 * valops.c (value_fetch_lazy): Do nop for value_optimized_out VAL.
2201 * value.c (allocate_computed_value): Use allocate_value_lazy instead
2202 of allocate_value and set_value_lazy.
2203 (value_from_contents_and_address): Use allocate_value_lazy instead of
2204 allocate_value and set_value_lazy when possible.
2206 2011-01-12 Andrew Burgess <aburgess@broadcom.com>
2208 * disasm.c (dump_insns): Support dumping opcodes for MI.
2209 * mi/mi-cmd-disas.c (mi_cmd_disassemble): Allow mode to control
2210 dumping of instruction opcodes.
2212 2011-01-09 Robert Millan <rmh@gnu.org> (tiny patch)
2214 * configure.tgt: Detect GNU/kFreeBSD and set `gdb_osabi'
2217 2011-01-11 Tom Tromey <tromey@redhat.com>
2219 * thread.c (do_captured_thread_select): Emit newline before
2222 2011-01-11 Michael Snyder <msnyder@vmware.com>
2224 * s390-tdep.c: Comment cleanup, mostly periods and spaces.
2225 * score-tdep.c: Ditto.
2226 * score-tdep.h: Ditto.
2227 * ser-base.c: Ditto.
2228 * ser-go32.c: Ditto.
2231 * ser-mingw.c: Ditto.
2232 * ser-pipe.c: Ditto.
2234 * ser-unix.c: Ditto.
2235 * sh64-tdep.c: Ditto.
2236 * shnbsd-nat.c: Ditto.
2240 * solib-darwin.c: Ditto.
2241 * solib-frv.c: Ditto.
2243 * solib-irix.c: Ditto.
2244 * solib-osf.c: Ditto.
2245 * solib-pa64.c: Ditto.
2246 * solib-som.c: Ditto.
2247 * solib-spu.c: Ditto.
2248 * solib-sunos.c: Ditto.
2249 * solib-svr4.c: Ditto.
2251 * sol-thread.c: Ditto.
2255 * sparc64-linux-tdep.c: Ditto.
2256 * sparc64-tdep.c: Ditto.
2257 * sparc-linux-nat.c: Ditto.
2258 * sparc-linux-tdep.c: Ditto.
2259 * sparc-sol2-nat.c: Ditto.
2260 * sparc-sol2-tdep.c: Ditto.
2261 * sparc-tdep.c: Ditto.
2262 * sparc-tdep.h: Ditto.
2263 * spu-tdep.c: Ditto.
2264 * stabsread.c: Ditto.
2265 * stabsread.h: Ditto.
2273 * target-descriptions.c: Ditto.
2274 * target-descriptions.h: Ditto.
2276 * target-memory.c: Ditto.
2277 * terminal.h: Ditto.
2280 * tracepoint.c: Ditto.
2281 * tracepoint.h: Ditto.
2282 * trad-frame.h: Ditto.
2283 * typeprint.c: Ditto.
2285 2011-01-11 Michael Snyder <msnyder@vmware.com>
2287 * ui-file.c: Comment cleanup, mostly periods and spaces.
2292 * v850-tdep.c: Ditto.
2293 * valarith.c: Ditto.
2295 * valprint.c: Ditto.
2296 * valprint.h: Ditto.
2301 * vax-tdep.c: Ditto.
2305 * windows-nat.c: Ditto.
2306 * windows-tdep.c: Ditto.
2307 * xcoffread.c: Ditto.
2308 * xcoffsolib.c: Ditto.
2309 * xml-support.c: Ditto.
2310 * xstormy16-tdep.c: Ditto.
2311 * xtensa-tdep.c: Ditto.
2312 * xtensa-tdep.h: Ditto.
2314 2011-01-11 Thiago Jung Bauermann <bauerman@br.ibm.com>
2316 * breakpoint.c (resources_needed_watchpoint): Fix indentation.
2317 * gdbtypes.c (is_scalar_type_recursive): Fix formatting.
2319 2011-01-11 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
2320 Thiago Jung Bauermann <bauerman@br.ibm.com>
2322 Implement support for PowerPC BookE ranged watchpoints.
2324 (struct breakpoint_ops) <resources_needed>: New method.
2325 Initialize to NULL in all existing breakpoint_ops instances.
2326 (struct breakpoint) <exact>: New field.
2327 (target_exact_watchpoints): Declare external global.
2328 * breakpoint.c (target_exact_watchpoints): New global flag.
2329 (update_watchpoint): Set b->type to bp_hardware_watchpoint and
2330 b->enable_state to bp_enabled before calling
2331 hw_watchpoint_used_count.
2332 (hw_watchpoint_used_count): Iterate over all bp_locations in a
2333 watchpoint. Call breakpoint's breakpoint_ops.resources_needed
2335 (insert_watchpoint, remove_watchpoint): Use fixed length of 1 byte
2336 if the watchpoint is exact.
2337 (resources_needed_watchpoint): New function.
2338 (watchpoint_breakpoint_ops): Add resources_needed_watchpoint.
2339 (watch_command_1): Set b->exact if the user asked for an exact
2340 watchpoint and one can be set.
2341 (can_use_hardware_watchpoint): Add exact_watchpoints argument.
2342 Pass fixed length of 1 to target_region_ok_for_hw_watchpoint if
2343 the user asks for an exact watchpoint and one can be set. Return
2344 number of needed debug registers to watch the expression.
2345 * gdbtypes.c (is_scalar_type): New function, based on
2346 valprint.c:scalar_type_p.
2347 (is_scalar_type_recursive): New function.
2348 * gdbtypes.h (is_scalar_type_recursive): Declare.
2349 * ppc-linux-nat.c (ppc_linux_region_ok_for_hw_watchpoint): Always
2350 handle regions when ranged watchpoints are available.
2351 (create_watchpoint_request): New function.
2352 (ppc_linux_insert_watchpoint, ppc_linux_remove_watchpoint): Use
2353 create_watchpoint_request.
2354 * rs6000-tdep.c (show_powerpc_exact_watchpoints): New function.
2355 (_initialize_rs6000_tdep): Add `exact-watchpoints' boolean to the
2356 `set powerpc' and `show powerpc' commands.
2357 * target.h (struct target_ops) <to_region_ok_for_hw_watchpoint>:
2358 Mention documentation comment in the target macro.
2359 (target_region_ok_for_hw_watchpoint): Document return value.
2361 2011-01-11 Thiago Jung Bauermann <bauerman@br.ibm.com>
2363 * breakpoint.c (update_watchpoint): Decide on using a software or
2364 hardware watchpoint after the bp_locations are created.
2366 2010-01-11 Thiago Jung Bauermann <bauerman@br.ibm.com>
2368 Convert hardware watchpoints to use breakpoint_ops.
2369 * breakpoint.h (breakpoint_ops) <insert>: Rename to...
2370 <insert_location>: ... this. Return int instead of void.
2371 Accept pointer to struct bp_location instead of pointer to
2372 struct breakpoint. Adapt all implementations.
2373 (breakpoint_ops) <remove>: Rename to...
2374 <remove_location>: ... this. Accept pointer to struct bp_location
2375 instead of pointer to struct breakpoint. Adapt all implementations.
2376 * breakpoint.c (insert_catchpoint): Delete function.
2377 (insert_bp_location): Call the watchpoint or catchpoint's
2378 breakpoint_ops.insert method.
2379 (remove_breakpoint_1): Call the watchpoint or catchpoint's
2380 breakpoint_ops.remove method.
2381 (insert_watchpoint, remove_watchpoint): New functions.
2382 (watchpoint_breakpoint_ops): New structure.
2383 (watch_command_1): Initialize the OPS field.
2384 * inf-child.c (inf_child_insert_fork_catchpoint)
2385 (inf_child_remove_fork_catchpoint, inf_child_insert_vfork_catchpoint)
2386 (inf_child_remove_vfork_catchpoint, inf_child_insert_exec_catchpoint)
2387 (inf_child_remove_exec_catchpoint, inf_child_set_syscall_catchpoint):
2389 (inf_child_target): Remove initialization of to_insert_fork_catchpoint,
2390 to_remove_fork_catchpoint, to_insert_vfork_catchpoint,
2391 to_remove_vfork_catchpoint, to_insert_exec_catchpoint,
2392 to_remove_exec_catchpoint and to_set_syscall_catchpoint.
2393 * target.c (update_current_target): Change default implementation of
2394 to_insert_fork_catchpoint, to_remove_fork_catchpoint,
2395 to_insert_vfork_catchpoint, to_remove_vfork_catchpoint,
2396 to_insert_exec_catchpoint, to_remove_exec_catchpoint and
2397 to_set_syscall_catchpoint to return_one.
2398 (debug_to_insert_fork_catchpoint, debug_to_insert_vfork_catchpoint)
2399 (debug_to_insert_exec_catchpoint): Report return value.
2400 * target.h (to_insert_fork_catchpoint, to_insert_vfork_catchpoint)
2401 (to_insert_exec_catchpoint): Change declaration to return int instead
2404 2011-01-11 Michael Snyder <msnyder@vmware.com>
2406 * arm-tdep.c: Internationalization.
2409 * fork-child.c: Ditto.
2410 * nto-procfs.c: Ditto.
2411 * ppc-sysv-tdep.c: Ditto.
2413 * remote-mips.c: Ditto.
2415 * rs6000-nat.c: Ditto.
2416 * rs6000-tdep.c: Ditto.
2420 * xml-support.c: Ditto.
2421 * mi/mi-cmd-break.c: Ditto.
2422 * mi/mi-cmd-var.c: Ditto.
2423 * mi/mi-interp.c: Ditto.
2424 * mi/mi-main.c: Ditto.
2426 2011-01-11 Andrew Burgess <aburgess@broadcom.com>
2428 * remote-sim.c (gdbsim_store_register): Update API to
2429 sim_store_register to check more error conditions.
2431 2011-01-10 Michael Snyder <msnyder@vmware.com>
2433 * nto-procfs.c: Comment cleanup, mostly periods and spaces.
2434 * nto-tdep.c: Ditto.
2435 * nto-tdep.h: Ditto.
2436 * objc-exp.y: Ditto.
2437 * objc-lang.c: Ditto.
2438 * objfiles.c: Ditto.
2439 * objfiles.h: Ditto.
2440 * observer.c: Ditto.
2441 * opencl-lang.c: Ditto.
2444 * parser-defs.h: Ditto.
2447 * posix-hdep.c: Ditto.
2448 * ppcbug-rom.c: Ditto.
2449 * ppc-linux-nat.c: Ditto.
2450 * ppc-linux-tdep.c: Ditto.
2451 * ppc-linux-tdep.h: Ditto.
2452 * ppcnbsd-tdep.c: Ditto.
2453 * ppcobsd-tdep.c: Ditto.
2454 * ppcobsd-tdep.h: Ditto.
2455 * ppc-sysv-tdep.c: Ditto.
2456 * ppc-tdep.h: Ditto.
2457 * printcmd.c: Ditto.
2458 * proc-abi.c: Ditto.
2459 * proc-flags.c: Ditto.
2461 * proc-utils.h: Ditto.
2462 * progspace.h: Ditto.
2463 * prologue-value.c: Ditto.
2464 * prologue-value.h: Ditto.
2465 * psympriv.h: Ditto.
2467 * p-typeprint.c: Ditto.
2468 * p-valprint.c: Ditto.
2469 * ravenscar-sparc-thread.c: Ditto.
2470 * ravenscar-thread.c: Ditto.
2471 * ravenscar-thread.h: Ditto.
2473 * regcache.c: Ditto.
2474 * regcache.h: Ditto.
2476 * remote-fileio.c: Ditto.
2477 * remote-fileio.h: Ditto.
2479 * remote-m32r-sdi.c: Ditto.
2480 * remote-mips.c: Ditto.
2481 * remote-sim.c: Ditto.
2482 * rs6000-aix-tdep.c: Ditto.
2483 * rs6000-nat.c: Ditto.
2484 * rs6000-tdep.c: Ditto.
2486 2011-01-10 Michael Snyder <msnyder@vmware.com>
2488 * charset.c (validate): Internationalization.
2489 * coffread.c (read_one_sym): Ditto.
2490 * dwarf2read.c (dwarf2_attach_fields_to_type): Ditto.
2491 * h8300-tdep.c (H8300_extract_return_value): Ditto.
2492 * inflow.c (new_tty): Ditto.
2493 * iq2000-tdep.c (iq2000_breakpoint_from_pc): Ditto.
2494 * m32c-tdep.c (m32c_return_value): Ditto.
2495 * mep-tdep.c (mep_store_return_value): Ditto.
2496 * score-tdep.c (score7_fetch_insn): Ditto.
2497 * ser-mingw.c (pipe_windows_open): Ditto.
2498 * sh64-tdep.c (sh64_extract_return_value): Ditto.
2499 * spu-tdep.c (spu_register_type): Ditto.
2500 * tracepoint.c (trace_find_command): Ditto.
2501 * valarith.c (value_pos): Ditto.
2503 2011-01-10 Joel Brobecker <brobecker@adacore.com>
2505 * ada-valprint.c (printstr): Minor comment reformatting.
2507 2011-01-08 Michael Snyder <msnyder@vmware.com>
2509 * m32r-rom.c (m32r_upload_command): Fix up ARI warnings for _
2512 2011-01-08 Michael Snyder <msnyder@vmware.com>
2514 * h8300-tdep.c: Comment cleanup, mostly periods and spaces.
2515 * hppa-hpux-tdep.c: Ditto.
2516 * hppa-linux-nat.c: Ditto.
2517 * hppa-linux-tdep.c: Ditto.
2518 * hppanbsd-tdep.c: Ditto.
2519 * hppa-tdep.c: Ditto.
2520 * hppa-tdep.h: Ditto.
2521 * hpux-thread.c: Ditto.
2522 * i386-cygwin-tdep.c: Ditto.
2523 * i386-darwin-nat.c: Ditto.
2524 * i386gnu-nat.c: Ditto.
2525 * i386-linux-nat.c: Ditto.
2526 * i386-linux-tdep.c: Ditto.
2527 * i386-nat.c: Ditto.
2528 * i386-nat.h: Ditto.
2529 * i386nbsd-tdep.c: Ditto.
2530 * i386-sol2-nat.c: Ditto.
2531 * i386-stub.c: Ditto.
2532 * i386-tdep.c: Ditto.
2533 * i386-tdep.h: Ditto.
2534 * i387-tdep.c: Ditto.
2535 * ia64-linux-nat.c: Ditto.
2536 * ia64-linux-tdep.c: Ditto.
2537 * ia64-tdep.c: Ditto.
2541 * inferior.c: Ditto.
2542 * inferior.h: Ditto.
2548 * iq2000-tdep.c: Ditto.
2549 * irix5-nat.c: Ditto.
2555 * jv-typeprint.c: Ditto.
2556 * jv-valprint.c: Ditto.
2557 * language.c: Ditto.
2558 * language.h: Ditto.
2559 * linespec.c: Ditto.
2560 * linux-fork.c: Ditto.
2561 * linux-nat.c: Ditto.
2562 * linux-thread-db.c: Ditto.
2563 * lm32-tdep.c: Ditto.
2565 2011-01-08 Michael Snyder <msnyder@vmware.com>
2567 * m2-exp.y: Comment cleanup, mostly periods and spaces.
2569 * m2-typeprint.c: Ditto.
2570 * m2-valprint.c: Ditto.
2571 * m32c-tdep.c: Ditto.
2572 * m32r-linux-nat.c: Ditto.
2573 * m32r-rom.c: Ditto.
2574 * m32r-tdep.c: Ditto.
2575 * m32r-tdep.h: Ditto.
2576 * m68hc11-tdep.c: Ditto.
2577 * m58klinux-nat.c: Ditto.
2578 * m68k-tdep.c: Ditto.
2579 * m88k-tdep.c: Ditto.
2580 * m88k-tdep.h: Ditto.
2581 * machoread.c: Ditto.
2582 * macrocmd.c: Ditto.
2583 * macroexp.c: Ditto.
2584 * macrotab.c: Ditto.
2587 * mdebugread.c: Ditto.
2588 * mdebugread.h: Ditto.
2591 * memory-map.h: Ditto.
2592 * mep-tdep.c: Ditto.
2593 * microblaze-rom.c: Ditto.
2594 * microblaze-tdep.c: Ditto.
2596 * mips-irix-tdep.c: Ditto.
2597 * mips-linux-nat.c: Ditto.
2598 * mips-linux-tdep.c: Ditto.
2599 * mips-linux-tdep.h: Ditto.
2600 * mipsnbsd-nat.c: Ditto.
2601 * mipsnbsd-tdep.c: Ditto.
2602 * mipsread.c: Ditto.
2603 * mips-tdep.c: Ditto.
2604 * mips-tdep.h: Ditto.
2605 * mn10300-linux-tdep.c: Ditto.
2606 * mn10300-tdep.c: Ditto.
2607 * mn10300-tdep.h: Ditto.
2610 * moxie-tdep.c: Ditto.
2611 * moxie-tdep.h: Ditto.
2614 2011-01-08 Mike Frysinger <vapier@gentoo.org>
2616 * bfin-tdep.h (BFIN_A0_DOT_W_REGNUM): Fix typo in name.
2618 2011-01-08 Robert Millan <rmh@gnu.org>
2620 * fbsd-nat.c (fbsd_find_memory_regions): Fix typo.
2622 2011-01-07 Michael Snyder <msnyder@vmware.com>
2624 * charset.c (_initialize_charset): Fix typo in string.
2626 2011-01-07 Michael Snyder <msnyder@vmware.com>
2628 * mi/mi-cmd-disas.c (mi_cmd_disassemble): Mark up error message
2630 * tui/tui-layout.c (tui_set_layout_for_display_command):
2631 Split line so that operator goes to beginning of line.
2632 * tui/tui-winsource.c (tui_horizontal_source_scroll): Move
2633 assignment out of if statement.
2635 2011-01-07 Michael Snyder <msnyder@vmware.com>
2637 * ada-lang.c: Comment cleanup, mostly periods and spaces.
2638 * ada-lang.h: Ditto.
2639 * ada-tasks.c: Ditto.
2640 * ada-valprint.c: Ditto.
2641 * aix-threads.c: Ditto.
2642 * alpha-linux-nat.c: Ditto.
2643 * alpha-linux-tdep.c: Ditto.
2644 * alpha-mdebug-tdep.c: Ditto.
2645 * alpha-nat.c: Ditto.
2646 * alpha-osf1-tdep.c: Ditto.
2647 * alpha-tdep.c: Ditto.
2648 * alphabsd-nat.c: Ditto.
2649 * alphabsd-tdep.c: Ditto.
2650 * amd64-darwin-tdep.c: Ditto.
2651 * amd64-linux-nat.c: Ditto.
2652 * amd64-linux-tdep.c: Ditto.
2653 * amd64-sol2-tdep.c: Ditto.
2654 * amd64-tdep.c: Ditto.
2655 * amd64-fbsd-tdep.c: Ditto.
2656 * amd64-nbsd-tdep.c: Ditto.
2657 * amd64-obsd-tdep.c: Ditto.
2658 * amd64-linux-nat.c: Ditto.
2659 * amd64-linux-tdep.c: Ditto.
2660 * arm-tdep.c: Ditto.
2661 * arm-tdep.h: Ditto.
2662 * armnbsd-nat.c: Ditto.
2663 * avr-tdep.c: Ditto.
2664 * bfin-tdep.c: Ditto.
2666 * c-typeprintc: Ditto.
2667 * c-valprint.c: Ditto.
2668 * coff-pe-read.h: Ditto.
2669 * coffreead.c: Ditto.
2670 * cris-tdep.c: Ditto.
2672 * darwin-nat-info.c: Ditto.
2673 * darwin-nat.c: Ditto.
2674 * dbug-rom.c: Ditto.
2678 * dec-thread.c: Ditto.
2680 * demangle.c: Ditto.
2681 * dicos-tdep.c: Ditto.
2682 * dictionary.c: Ditto.
2683 * dictionary.h: Ditto.
2684 * dink32-rom.c: Ditto.
2686 * doublest.c: Ditto.
2688 * dummy-frame.c: Ditto.
2689 * dwarf2-frame.c: Ditto.
2690 * dwarf2expr.c: Ditto.
2691 * dwarf2loc.c: Ditto.
2692 * dwarf2read.c: Ditto.
2696 * event-top.h: Ditto.
2697 * exceptions.c: Ditto.
2698 * exceptions.h: Ditto.
2700 * expprint.c: Ditto.
2701 * expression.h: Ditto.
2705 * f-typeprint.c: Ditto.
2706 * f-valprint.c: Ditto.
2707 * fbsd-nat.c: Ditto.
2709 * fork-child.c: Ditto.
2712 * frv-linux-tdep.c: Ditto.
2713 * frv-tdep.c: Ditto.
2715 * gdb-stabs.h: Ditto.
2716 * gdb_assert.h: Ditto.
2717 * gdb_string.h: Ditto.
2718 * gdb_thread_db.h: Ditto.
2719 * gdb_wait.h: Ditto.
2720 * gdbarch.sh: Ditto.
2722 * gdbthread.h: Ditto.
2723 * gdbtypes.c: Ditto.
2724 * gdbtypes.h: Ditto.
2727 * gnu-v2-abi.c: Ditto.
2728 * gnu-v3-abi.c: Ditto.
2729 * go32-nat.c: Ditto.
2730 * gdbarch.c: Regenerate.
2731 * gdbarch.h: Regenerate.
2733 2011-01-07 Michael Snyder <msnyder@vmware.com>
2735 * ax-gdb.c: Adjust some long output strings.
2736 * breakpoint.c: Ditto.
2741 * linux-nat.c: Ditto.
2742 * solib-pa64.c: Ditto.
2743 * solib-som.c: Ditto.
2745 2011-01-06 Tom Tromey <tromey@redhat.com>
2749 * python/python.c (GdbMethods): Add "newest_frame" method.
2750 * python/python-internal.h (gdbpy_newest_frame): Declare.
2751 * python/py-frame.c (gdbpy_newest_frame): New function.
2753 2010-01-06 Paul Pluzhnikov <ppluzhnikov@google.com>
2755 * jit.h (struct jit_code_entry): use ULONGEST for symfile_size.
2756 * jit.c (jit_debug): New variable.
2757 (show_jit_debug): New function.
2758 (struct target_buffer): Use ULONGEST.
2759 (bfd_open_from_target_memory): Likewise.
2760 (jit_register_code, jit_inferior_init): Add debug output.
2761 (_initialize_jit): Register "debug jit" command.
2763 2011-01-06 Tom Tromey <tromey@redhat.com>
2765 * frame.h (enum frame_type) <INLINE_FRAME>: Fix comment.
2766 * python/py-frame.c (gdbpy_initialize_frames): Add INLINE_FRAME
2769 2011-01-06 Tom Tromey <tromey@redhat.com>
2771 * python/py-frame.c (frapy_block): Use get_frame_block.
2773 2011-01-06 Joel Brobecker <brobecker@adacore.com>
2775 Do not stop on SIGPRIO signals by default
2776 * infrun.c (_initialize_infrun): Unset signal_stop and
2777 signal_print for TARGET_SIGNAL_PRIO.
2779 2011-01-06 Joel Brobecker <brobecker@adacore.com>
2781 * ada-tasks.c: Fix style violation in comment.
2783 2011-01-06 Joel Brobecker <brobecker@adacore.com>
2785 * linespec.c (decode_compound, find_method): Remove trailing \n
2786 at end of error string.
2787 * solib-irix.c (irix_current_sos): Likewise.
2788 * varobj.c (uninstall_variable): Likewise.
2790 2011-01-06 Joel Brobecker <brobecker@adacore.com>
2792 * copyright.py: New script.
2793 * copyright.sh (byhand): Add *.ads, *.adb, *.gpr and *.inc.
2794 Launch emacs without exec'ing. Call copyright.py afterwards.
2796 2011-01-05 Michael Snyder <msnyder@vmware.com>
2798 * addrmap.c: Shorten lines of >= 80 columns.
2799 * arch-utils.c: Ditto.
2800 * arch-utils.h: Ditto.
2802 * ax-general.c: Ditto.
2804 * blockframe.c: Ditto.
2805 * breakpoint.c: Ditto.
2806 * buildsym.c: Ditto.
2808 * c-typeprint.c: Ditto.
2810 * coffread.c: Ditto.
2814 * cp-namespace.c: Ditto.
2815 * cp-support.c: Ditto.
2816 * dbug-rom.c: Ditto.
2821 * dictionary.c: Ditto.
2823 * doublest.c: Ditto.
2824 * dwarf2-frame.c: Ditto.
2825 * dwarf2expr.c: Ditto.
2826 * dwarf2loc.c: Ditto.
2827 * dwarf2read.c: Ditto.
2830 * event-loop.c: Ditto.
2831 * event-loop.h: Ditto.
2832 * exceptions.h: Ditto.
2834 * expprint.c: Ditto.
2835 * expression.h: Ditto.
2837 * f-valprint.c: Ditto.
2839 * frame-base.c: Ditto.
2840 * frame-unwind.c: Ditto.
2841 * frame-unwind.h: Ditto.
2845 * gdb-stabs.h: Ditto.
2846 * gdb_assert.h: Ditto.
2847 * gdb_dirent.h: Ditto.
2848 * gdb_obstack.h: Ditto.
2850 * gdbtypes.c: Ditto.
2851 * gdbtypes.h: Ditto.
2852 * inf-ttrace.c: Ditto.
2857 * inline-frame.h: Ditto.
2858 * language.c: Ditto.
2859 * language.h: Ditto.
2860 * libunwind-frame.c: Ditto.
2861 * libunwind-frame.h: Ditto.
2862 * linespec.c: Ditto.
2863 * linux-nat.c: Ditto.
2864 * linux-nat.h: Ditto.
2865 * linux-thread-db.c: Ditto.
2866 * machoread.c: Ditto.
2867 * macroexp.c: Ditto.
2868 * macrotab.c: Ditto.
2871 * mdebugread.c: Ditto.
2876 * objfiles.c: Ditto.
2877 * objfiles.h: Ditto.
2879 * p-typeprint.c: Ditto.
2880 * p-valprint.c: Ditto.
2882 * printcmd.c: Ditto.
2883 * proc-events.c: Ditto.
2885 * progspace.c: Ditto.
2886 * progspace.h: Ditto.
2887 * psympriv.h: Ditto.
2890 * regcache.c: Ditto.
2891 * regcache.h: Ditto.
2892 * remote-fileio.c: Ditto.
2894 * ser-mingw.c: Ditto.
2896 * ser-unix.c: Ditto.
2899 * solib-frv.c: Ditto.
2900 * solib-irix.c: Ditto.
2901 * solib-osf.c: Ditto.
2902 * solib-pa64.c: Ditto.
2903 * solib-som.c: Ditto.
2904 * solib-sunos.c: Ditto.
2905 * solib-svr4.c: Ditto.
2906 * solib-target.c: Ditto.
2910 * stabsread.c: Ditto.
2911 * stabsread.c: Ditto.
2914 * symfile-mem.c: Ditto.
2920 * target-descriptions.c: Ditto.
2921 * target-memory.c: Ditto.
2924 * terminal.h: Ditto.
2927 * tracepoint.c: Ditto.
2928 * tracepoint.h: Ditto.
2932 * user-regs.c: Ditto.
2933 * user-regs.h: Ditto.
2935 * valarith.c: Ditto.
2937 * valprint.c: Ditto.
2938 * valprint.h: Ditto.
2943 * xcoffread.c: Ditto.
2944 * xcoffsolib.c: Ditto.
2945 * xcoffsolib.h: Ditto.
2946 * xml-syscall.c: Ditto.
2947 * xml-tdesc.c: Ditto.
2949 2011-01-05 Michael Snyder <msnyder@vmware.com>
2951 * cli/cli-cmds.c: Shorten lines of >= 80 columns.
2952 * cli/cli-decode.c: Ditto.
2953 * cli/cli-dump.c: Ditto.
2954 * cli/cli-logging.c: Ditto.
2955 * cli/cli-script.c: Ditto.
2956 * cli/cli-setshow.c: Ditto.
2957 * common/signals.c: Ditto.
2958 * mi/mi-cmd-break.c: Ditto.
2959 * mi/mi-cmd-disas.c: Ditto.
2960 * mi/mi-cmd-stack.c: Ditto.
2961 * mi/mi-cmd-var.c: Ditto.
2962 * mi/mi-cmds.c: Ditto.
2963 * mi/mi-common.h: Ditto.
2964 * mi/mi-console.c: Ditto.
2965 * mi/mi-interp.c: Ditto.
2966 * mi/mi-main.c: Ditto.
2967 * osf-share/cma_attr.c: Ditto.
2968 * osf-share/cma_deb_core.h: Ditto.
2969 * osf-share/cma_debug_client.h: Ditto.
2970 * osf-share/cma_handle.h: Ditto.
2971 * osf-share/cma_mutex.h: Ditto.
2972 * osf-share/cma_stack_int.h: Ditto.
2973 * osf-share/cma_tcb_defs.h: Ditto.
2974 * python/py-auto-load.c: Ditto.
2975 * python/py-breakpoint.c: Ditto.
2976 * python/py-cmd.c: Ditto.
2977 * python/py-frame.c: Ditto.
2978 * python/py-objfile.c: Ditto.
2979 * python/py-param.c: Ditto.
2980 * python/py-progspace.c: Ditto.
2981 * python/py-symbol.c: Ditto.
2982 * python/py-value.c: Ditto.
2983 * python/python-internal.h: Ditto.
2984 * python/python.c: Ditto.
2985 * tui/tui-data.c: Ditto.
2986 * tui/tui-disasm.c: Ditto.
2987 * tui/tui-hooks.c: Ditto.
2988 * tui/tui-io.c: Ditto.
2989 * tui/tui-layout.c: Ditto.
2990 * tui/tui-regs.c: Ditto.
2991 * tui/tui-source.c: Ditto.
2992 * tui/tui-stack.c: Ditto.
2993 * tui/tui-win.c: Ditto.
2994 * tui/tui-windata.c: Ditto.
2995 * tui/tui-winsource.c: Ditto.
2997 2011-01-05 Joel Brobecker <brobecker@adacore.com>
2999 * configure.ac, gdb.1: Copyright year update.
3001 2011-01-03 Jan Kratochvil <jan.kratochvil@redhat.com>
3003 * frame.c (get_prev_frame_1) <UNWIND_INNER_ID>: New variables
3004 this_pc_in_block, morestack_msym and morestack_name. Check for
3005 "__morestack" minimal symbol there.
3007 2011-01-03 Joel Brobecker <brobecker@adacore.com>
3009 * symfile.c (find_sym_fns): Add call to dont_repeat.
3011 2011-01-01 Joel Brobecker <brobecker@adacore.com>
3013 Copyright year update in most files (performed by copyright.sh).
3015 2011-01-01 Joel Brobecker <brobecker@adacore.com>
3017 * top.c (print_gdb_version): Update copyright year in version output.
3019 For older changes see ChangeLog-2010.
3025 version-control: never