1 2014-02-17 Kevin Buettner <kevinb@redhat.com>
3 * rl78-tdep.c (rl78_g10_register_name): New function.
4 (rl78_return_value): Add g10 support.
5 (rl78_gdbarch_init): Register rl78_g10_register_name for the
8 2014-02-17 Doug Evans <xdje42@gmail.com>
10 * Makefile.in (SUBDIR_GUILE_OBS): Resort alphabetically.
11 (SUBDIR_GUILE_SRCS): Ditto.
14 2014-02-17 Yao Qi <yao@codesourcery.com>
16 * gnu-nat.c (ILL_RPC): Declare defined function.
18 2014-02-17 Yao Qi <yao@codesourcery.com>
20 * gnu-nat.c (gnu_read_inferior): Change 'copy_count' type to
21 mach_msg_type_number_t.
22 (gnu_write_inferior): Likewise.
24 2014-02-17 Yao Qi <yao@codesourcery.com>
26 * gnu-nat.c (proc_get_exception_port): Use 'lu' insetad of 'd'
28 (proc_steal_exc_port, make_proc, inf_set_pid): Likewise.
29 (inf_validate_procs, inf_signal): Likewise.
30 (S_exception_raise_request): Likewise.
31 (do_mach_notify_dead_name): Likewise.
32 (steal_exc_port): Likewise.
33 (gnu_read_inferior): Change 'copy_count''s type to
34 mach_msg_type_number_t.
35 (gnu_write_inferior): Likewise. Use 'lx' instead of 'x' in
38 2014-02-16 Thomas Schwinge <thomas@codesourcery.com>
40 * gnu-nat.c (struct inf): Change pending_execs member to a 1-bit
41 flag. Adjust all users; in particular...
42 (gnu_wait): ..., don't decrement its value in here...
43 (gnu_create_inferior): ..., and instead set the flag in here,
44 around the startup_inferior call, and call that one with
45 START_INFERIOR_TRAPS_EXPECTED.
47 * gnu-nat.c (ill_rpc): Remove function; replaced with this...
48 (ILL_RPC): ... new macro.
49 (do_mach_notify_no_senders, do_mach_notify_port_deleted)
50 (do_mach_notify_msg_accepted, do_mach_notify_port_destroyed)
51 (do_mach_notify_send_once, S_proc_setmsgport_reply)
52 (S_proc_getmsgport_reply, S_msg_sig_post_reply): Generate stub
53 functions with ILL_RPC macro.
54 (S_proc_pid2task_reply, S_proc_task2pid_reply)
55 (S_proc_task2proc_reply, S_proc_proc2task_reply)
56 (S_proc_pid2proc_reply, S_proc_getprocinfo_reply)
57 (S_proc_getprocargs_reply, S_proc_getprocenv_reply)
58 (S_proc_getloginid_reply, S_proc_getloginpids_reply)
59 (S_proc_getlogin_reply, S_proc_getsid_reply)
60 (S_proc_getsessionpgids_reply, S_proc_getsessionpids_reply)
61 (S_proc_getsidport_reply, S_proc_getpgrp_reply)
62 (S_proc_getpgrppids_reply, S_proc_get_tty_reply)
63 (S_proc_getnports_reply, S_proc_is_important_reply)
64 (S_proc_get_code_reply): New stub functions, generated with
67 * reply_mig_hack.awk: In phase 5, keep going if we have not yet
68 collected the type check structures.
70 * reply_mig_hack.awk: Don't expect to see the auto keyword.
72 2014-02-14 Doug Evans <dje@google.com>
74 * target.c (target_write_partial): Fix result type.
76 2014-02-14 Jose E. Marchesi <jose.marchesi@oracle.com>
78 * sparc64-linux-nat.c (_initialize_sparc64_linux_nat): Register
79 the proper offsets to access fpregset_t.
81 2014-02-13 Sanimir Agovic <sanimir.agovic@intel.com>
83 * cris-tdep.c (cris_supply_gregset): Remove zerobuf.
84 (_initialize_cris_tdep): Remove cris_set_cmdlist, cris_show_cmdlist.
85 * h8300-tdep.c (setmachinelist): Remove global.
86 * hppa-tdep.c (hppa_sigtramp): Remove global.
87 * mipsnbsd-tdep.c (sigtramp_retcode_mipsel, sigtramp_retcode_mipseb
88 RETCODE_NWORDS, RETCODE_SIZE): Wrap code with #if 0.
89 * ravenscar-thread.c (update_target_observer): Remove global.
90 * rs6000-tdep.c (rs6000_gdbarch_init): Remove segment_regs.
92 2014-02-12 Tom Tromey <tromey@redhat.com>
94 * common/rsp-low.c: Update comments.
95 * common/rsp-low.h: Update comments.
97 2014-02-12 Tom Tromey <tromey@redhat.com>
99 * common/rsp-low.c (convert_ascii_to_int): Remove.
100 * common/rsp-low.h (convert_ascii_to_int): Don't declare.
102 2014-02-12 Tom Tromey <tromey@redhat.com>
104 * common/rsp-low.h (unhexify): Don't declare.
105 * common/rsp-low.c (unhexify): Remove.
107 2014-02-12 Tom Tromey <tromey@redhat.com>
109 * common/rsp-low.h (convert_int_to_ascii): Don't declare.
110 * common/rsp-low.c (convert_int_to_ascii): Remove.
112 2014-02-12 Tom Tromey <tromey@redhat.com>
114 * common/rsp-low.h (hexify): Don't declare.
115 * common/rsp-low.c (hexify): Remove.
117 2014-02-12 Tom Tromey <tromey@redhat.com>
119 * common/rsp-low.c (hexify): Never take strlen of argument.
121 2014-02-12 Tom Tromey <tromey@redhat.com>
123 * common/rsp-low.c (bin2hex): Never take strlen of argument.
124 * remote.c (extended_remote_run, remote_rcmd)
125 (remote_download_trace_state_variable, remote_save_trace_data)
126 (remote_set_trace_notes): Update.
127 * tracepoint.c (encode_source_string, tfile_write_status)
128 (tfile_write_uploaded_tsv): Update.
130 2014-02-12 Tom Tromey <tromey@redhat.com>
132 * tracepoint.c: Include rsp-low.h.
133 * remote.h (hex2bin, bin2hex, unpack_varlen_hex): Don't declare.
134 * remote.c: Include rsp-low.h.
135 (hexchars, ishex, unpack_varlen_hex, pack_nibble, pack_hex_byte)
136 (fromhex, hex2bin, tohex, bin2hex, remote_escape_output)
137 (remote_unescape_input): Move to common/rsp-low.c.
138 * common/rsp-low.h: New file.
139 * common/rsp-low.c: New file.
140 * Makefile.in (SFILES): Add common/rsp-low.c.
141 (HFILES_NO_SRCDIR): Add common/rsp-low.h.
142 (COMMON_OBS): Add rsp-low.o.
143 (rsp-low.o): New target.
145 2014-02-12 Tom Tromey <tromey@redhat.com>
147 * utils.h: Include print-utils.h.
148 (host_address_to_string, plongest, pulongest, phex, phex_nz)
149 (int_string, core_addr_to_string, core_addr_to_string_nz)
150 (hex_string, hex_string_custom): Don't declare.
151 * utils.c (NUMCELLS, CELLSIZE, get_cell, decimal2str, pulongest)
152 (plongest, thirty_two, phex, phex_nz, octal2str, hex_string)
153 (hex_string_custom, int_string, core_addr_to_string)
154 (core_addr_to_string_nz, host_address_to_string): Move to
155 common/print-utils.c.
156 * common/print-utils.h: New file.
157 * common/print-utils.c: New file
158 * Makefile.in (SFILES): Add common/print-utils.c.
159 (HFILES_NO_SRCDIR): Add common/print-utils.h.
160 (COMMON_OBS): Add print-utils.o.
161 (print-utils.o): New target.
163 2014-02-12 Tom Tromey <tromey@redhat.com>
165 * nios2-tdep.c (nios2_stub_frame_base_address): Remove.
167 2014-02-12 Mark Kettenis <kettenis@gnu.org>
169 * sparc64obsd-tdep.c (sparc64obsd_init_abi): Call obsd_init_abi.
171 2014-02-12 Mark Kettenis <kettenis@gnu.org>
173 * inf-ptrace.c (inf_ptrace_xfer_partial): Return TARGET_XFER_EOF
174 if a PT_IO ptrace request returns sucessfully but indicates that 0
175 bytes were transferred.
177 2014-02-12 Pedro Alves <palves@redhat.com>
178 Kevin Buettner <kevinb@redhat.com>
180 * gnu-v3-abi.c (build_gdb_vtable_type): Return a type marked with
181 TYPE_INSTANCE_FLAG_CODE_SPACE.
183 2014-02-12 Pedro Alves <palves@redhat.com>
185 * h8300-tdep.c (pseudo_from_raw_register)
186 (raw_from_pseudo_register): New functions.
187 (h8300_pseudo_register_read, h8300_pseudo_register_write): Use
190 2014-02-12 Pedro Alves <palves@redhat.com>
192 * h8300-tdep.c (h8300_register_sim_regno): New function.
193 (h8300_gdbarch_init): Install h8300_register_sim_regno as
194 gdbarch_register_sim_regno hook.
196 2014-02-12 Sanimir Agovic <sanimir.agovic@intel.com>
198 * nios2-tdep.c (nios2_stub_frame_base): Remove global.
200 2014-02-12 Sanimir Agovic <sanimir.agovic@intel.com>
202 * tic6x-tdep.c (tic6x_gdbarch_init): Call frame_base_set_default.
204 2014-02-12 Mark Kettenis <kettenis@gnu.org>
206 * obsd-tdep.h (obsd_init_abi): New prototype.
207 * obsd-tdep.c: Define enum with OpenBSD signal numbers.
208 (obsd_gdb_signal_from_target, obsd_gdb_signal_to_target)
209 (obsd_init_abi): New functions.
210 * i386obsd-tdep.c: Include "obsd-tdep.h".
211 (i386obsd_init_abi): Call obsd_init_abi.
212 * amd64obsd-tdep.c: Include "obsd-tdep.h".
213 (amd64obsd_init_abi): Call obsd_init_abi.
214 * configure.tgt (i[34567]86-*-openbsd*, x86_64-*-openbsd*): Add
215 obsd-tdep.c to gdb_target_obs.
217 2014-02-11 Jose E. Marchesi <jose.marchesi@oracle.com>
219 * sparc64-tdep.c (sparc64_store_arguments): Do not align complex
220 double float arguments to 16-byte in the argument slots.
222 2014-02-11 Doug Evans <xdje42@gmail.com>
224 * configure.ac: Don't crash if pkg-config is not found and guile
225 wasn't explicitly requested. Use AC_MSG_ERROR instead of AC_ERROR
227 * configure: Regenerate.
229 2014-02-11 Yao Qi <yao@codesourcery.com>
231 * aix-thread.c (aix_thread_xfer_partial): Update comments.
232 * auxv.c (procfs_xfer_auxv, memory_xfer_auxv): Likewise.
233 * bsd-uthread.c (bsd_uthread_xfer_partial): Likewise.
234 * gnu-nat.c (gnu_xfer_memory): Likewise.
235 * inf-ptrace.c (inf_ptrace_xfer_partial): Likewise.
236 * rs6000-nat.c (rs6000_xfer_partial): Likewise.
237 * sparc-nat.c (sparc_xfer_wcookie): Likewise.
238 * spu-linux-nat.c (spu_proc_xfer_spu): Likewise.
240 2014-02-11 Yao Qi <yao@codesourcery.com>
242 * target.h (enum target_xfer_error): Rename to ...
243 (enum target_xfer_status): ... it. New. All users updated.
244 (enum target_xfer_status) <TARGET_XFER_OK>, <TARGET_XFER_EOF>:
246 (TARGET_XFER_STATUS_ERROR_P): New macro.
247 (target_xfer_error_to_string): Remove declaration.
248 (target_xfer_status_to_string): Declare.
249 (target_xfer_partial_ftype): Adjust it.
250 (struct target_ops) <to_xfer_partial>: Return
251 target_xfer_status. Add argument xfered_len. Update
253 * target.c (target_xfer_error_to_string): Rename to ...
254 (target_xfer_status_to_string): ... it. New. All callers
256 (target_read_live_memory): Likewise. Call target_xfer_partial
257 instead of target_read.
258 (memory_xfer_live_readonly_partial): Return
259 target_xfer_status. Add argument xfered_len.
260 (raw_memory_xfer_partial): Likewise.
261 (memory_xfer_partial_1): Likewise.
262 (memory_xfer_partial): Likewise.
263 (target_xfer_partial): Likewise. Check *XFERED_LEN is set
264 properly. Update debug message.
265 (default_xfer_partial, current_xfer_partial): Likewise.
266 (target_write_partial): Likewise.
267 (target_read_partial): Likewise. All callers updated.
268 (read_whatever_is_readable): Likewise.
269 (target_write_with_progress): Likewise.
270 (target_read_alloc_1): Likewise.
272 * aix-thread.c (aix_thread_xfer_partial): Likewise.
273 * auxv.c (procfs_xfer_auxv): Likewise.
274 (ld_so_xfer_auxv, memory_xfer_auxv): Likewise.
275 * bfd-target.c (target_bfd_xfer_partial): Likewise.
276 * bsd-kvm.c (bsd_kvm_xfer_partial): Likewise.
277 * bsd-uthread.c (bsd_uthread_xfer_partia): Likewise.
278 * corefile.c (read_memory): Adjust.
279 * corelow.c (core_xfer_partial): Likewise.
280 * ctf.c (ctf_xfer_partial): Likewise.
281 * darwin-nat.c (darwin_read_dyld_info): Likewise. All callers
283 (darwin_xfer_partial): Likewise.
284 * exec.c (section_table_xfer_memory_partial): Likewise. All
286 (exec_xfer_partial): Likewise.
287 * exec.h (section_table_xfer_memory_partial): Update
289 * gnu-nat.c (gnu_xfer_memory): Likewise. Assert 'res' is not
291 (gnu_xfer_partial): Likewise.
292 * ia64-hpux-nat.c (ia64_hpux_xfer_memory_no_bs): Likewise.
293 (ia64_hpux_xfer_memory, ia64_hpux_xfer_uregs): Likewise.
294 (ia64_hpux_xfer_solib_got): Likewise.
295 * inf-ptrace.c (inf_ptrace_xfer_partial): Likewise. Change
296 type of 'partial_len' to ULONGEST.
297 * inf-ttrace.c (inf_ttrace_xfer_partial): Likewise.
298 * linux-nat.c (linux_xfer_siginfo ): Likewise.
299 (linux_nat_xfer_partial): Likewise.
300 (linux_proc_xfer_partial, linux_xfer_partial): Likewise.
301 (linux_proc_xfer_spu, linux_nat_xfer_osdata): Likewise.
302 * monitor.c (monitor_xfer_memory): Likewise.
303 (monitor_xfer_partial): Likewise.
304 * procfs.c (procfs_xfer_partial): Likewise.
305 * record-btrace.c (record_btrace_xfer_partial): Likewise.
306 * record-full.c (record_full_xfer_partial): Likewise.
307 (record_full_core_xfer_partial): Likewise.
308 * remote-sim.c (gdbsim_xfer_memory): Likewise.
309 (gdbsim_xfer_partial): Likewise.
310 * remote.c (remote_write_bytes_aux): Likewise. All callers
312 (remote_write_bytes, remote_read_bytes): Likewise. All
314 (remote_flash_erase): Likewise. All callers updated.
315 (remote_write_qxfer): Likewise. All callers updated.
316 (remote_read_qxfer): Likewise. All callers updated.
317 (remote_xfer_partial): Likewise.
318 * rs6000-nat.c (rs6000_xfer_partial): Likewise.
319 (rs6000_xfer_shared_libraries): Likewise.
320 * sol-thread.c (sol_thread_xfer_partial): Likewise.
321 (sol_thread_xfer_partial): Likewise.
322 * sparc-nat.c (sparc_xfer_wcookie): Likewise.
323 (sparc_xfer_partial): Likewise.
324 * spu-linux-nat.c (spu_proc_xfer_spu): Likewise. All callers
326 (spu_xfer_partial): Likewise.
327 * spu-multiarch.c (spu_xfer_partial): Likewise.
328 * tracepoint.c (tfile_xfer_partial): Likewise.
329 * windows-nat.c (windows_xfer_memory): Likewise.
330 (windows_xfer_shared_libraries): Likewise.
331 (windows_xfer_partial): Likewise.
332 * valprint.c: Replace 'target_xfer_error' with
333 'target_xfer_status' in comments.
335 2014-02-11 Simon Marchi <simon.marchi@ericsson.com> (tiny patch)
337 Checked in by Joel Brobecker <brobecker@adacore.com>.
338 * mi/mi-main.c (mi_cmd_data_write_memory_bytes): Fix comment.
340 2014-02-11 Joel Brobecker <brobecker@adacore.com>
342 * symfile-debug.c (debug_qf_expand_symtabs_matching): Reformat
345 2014-02-10 Will Newton <will.newton@linaro.org>
347 * elfread.c (elf_rel_plt_read): Look for a .got section if
348 looking up .got.plt fails.
349 (elf_gnu_ifunc_resolve_by_got): Call gdbarch_addr_bits_remove
350 on address passed to elf_gnu_ifunc_record_cache.
351 (elf_gnu_ifunc_resolve_addr): Likewise.
352 (elf_gnu_ifunc_resolver_return_stop): Likewise.
354 2014-02-10 Jose E. Marchesi <jose.marchesi@oracle.com>
356 * sparc-tdep.c (sparc_in_function_epilogue_p): New function.
357 (X_RETTURN): New macro.
358 * sparc-tdep.h: sparc_in_function_epilogue_p prototype.
360 * sparc64-tdep.c (sparc64_init_abi): Hook
361 sparc_in_function_epilogue_p.
363 2014-02-10 Gary Benson <gbenson@redhat.com>
365 * symfile-debug.c (debug_qf_expand_symtabs_matching):
366 Rename name_matcher to symbol_matcher.
368 2014-02-10 Gary Benson <gbenson@redhat.com>
370 * symfile-debug.c (debug_qf_expand_symtabs_matching):
371 Use expand_symtabs_file_matcher_ftype and
372 expand_symtabs_symbol_matcher_ftype.
374 2014-02-10 Joel Brobecker <brobecker@adacore.com>
376 * ada-lang.c (struct cache_entry, HASH_SIZE): Move definition up.
377 (struct ada_symbol_cache): New.
378 (ada_free_symbol_cache): Forward declare.
379 (struct ada_pspace_data): New.
380 (ada_pspace_data_handle): New static global.
381 (get_ada_pspace_data, ada_pspace_data_cleanup)
382 (ada_init_symbol_cache, ada_free_symbol_cache): New functions.
383 (cache_space, cache): Delete, now folded inside struct
385 (ada_get_symbol_cache): New function.
386 (ada_clear_symbol_cache, find_entry, cache_symbol): Adjust
388 (_initialize_ada_language): Remove initialization of cache_space.
389 Move call to observer_attach_inferior_exit up, grouping it
390 with the other observer registrations inside this function.
391 Rename command to be more general. Add call to
392 register_program_space_data_with_cleanup.
394 2014-02-10 Joel Brobecker <brobecker@adacore.com>
396 * ada-tasks.c (ada_tasks_new_objfile_observer): Renames
397 ada_new_objfile_observer.
398 (ada_tasks_normal_stop_observer): Renames ada_normal_stop_observer.
399 (_initialize_tasks): Update uses of ada_new_objfile_observer
400 and ada_tasks_normal_stop_observer.
402 2014-02-10 Joel Brobecker <brobecker@adacore.com>
404 * ada-lang.c (ada_evaluate_subexp): Set the type of the value
405 returned by the 'Length attribute to integer.
407 2014-02-10 Joel Brobecker <brobecker@adacore.com>
409 * ada-lang.c (_initialize_ada_language): Initialize
412 2014-02-10 Joel Brobecker <brobecker@adacore.com>
414 * ada-lang.c (HASH_SIZE): New macro.
415 (struct cache_entry): New type.
416 (cache_space, cache): New static globals.
417 (ada_clear_symbol_cache, find_entry): New functions.
418 (lookup_cached_symbol, cache_symbol): Implement.
419 (ada_new_objfile_observer, ada_free_objfile_observer): New.
420 (_initialize_ada_language): Attach ada_new_objfile_observer
421 and ada_free_objfile_observer.
423 2014-02-10 Joel Brobecker <brobecker@adacore.com>
425 * ada-lang.c (ada_add_block_symbols, add_defn_to_vec)
426 (lookup_cached_symbol, ada_add_local_symbols): Add "const" to
427 struct block * parameter.
428 (ada_lookup_symbol_list_worker): Constify local variable "block".
429 Remove cast which is no longer necessary.
431 2014-02-10 Doug Evans <xdje42@gmail.com>
433 Add Guile as an extension language.
434 * NEWS: Mention Guile scripting.
435 * Makefile.in (SUBDIR_GUILE_OBS): New variable.
436 (SUBDIR_GUILE_SRCS, SUBDIR_GUILE_DEPS): New variables
437 (SUBDIR_GUILE_LDFLAGS, SUBDIR_GUILE_CFLAGS): New variables.
438 (INTERNAL_CPPFLAGS): Add GUILE_CPPFLAGS.
439 (CLIBS): Add GUILE_LIBS.
440 (install-guile): New rule.
442 (scm-arch.o, scm-auto-load.o, scm-block.o): New rules.
443 (scm-breakpoint.o, scm-disasm.o, scm-exception.o): New rules.
444 (scm-frame.o, scm-iterator.o, scm-lazy-string.o): New rules.
445 (scm-math.o, scm-objfile.o, scm-ports.o): New rules.
446 (scm-pretty-print.o, scm-safe-call.o, scm-gsmob.o): New rules.
447 (scm-string.o, scm-symbol.o, scm-symtab.o): New rules.
448 (scm-type.o, scm-utils.o, scm-value.o): New rules.
449 * configure.ac: New option --with-guile.
450 * configure: Regenerate.
451 * config.in: Regenerate.
452 * auto-load.c: Remove #include "python/python.h". Add #include
453 "gdb/section-scripts.h".
454 (source_section_scripts): Handle Guile scripts.
455 (_initialize_auto_load): Add name of Guile objfile script to
456 scripts-directory help text.
457 * breakpoint.c (condition_command): Tweak comment to include Scheme.
458 * breakpoint.h (gdbscm_breakpoint_object): Add forward decl.
459 (struct breakpoint): New member scm_bp_object.
460 * defs.h (enum command_control_type): New value guile_control.
461 * cli/cli-cmds.c: Remove #include "python/python.h". Add #include
463 (show_user): Update comment.
464 (_initialize_cli_cmds): Update help text for "show user". Update help
465 text for max-user-call-depth.
466 * cli/cli-script.c: Remove #include "python/python.h". Add #include
468 (multi_line_command_p): Add guile_control.
469 (print_command_lines): Handle guile_control.
470 (execute_control_command, recurse_read_control_structure): Ditto.
471 (process_next_line): Recognize "guile" commands.
472 * disasm.c (gdb_disassemble_info): Make non-static.
473 * disasm.h: #include "dis-asm.h".
474 (struct gdbarch): Add forward decl.
475 (gdb_disassemble_info): Declare.
476 * extension.c: #include "guile/guile.h".
477 (extension_languages): Add guile.
478 (get_ext_lang_defn): Handle EXT_LANG_GDB.
479 * extension.h (enum extension_language): New value EXT_LANG_GUILE.
480 * gdbtypes.c (get_unsigned_type_max): New function.
481 (get_signed_type_minmax): New function.
482 * gdbtypes.h (get_unsigned_type_max): Declare.
483 (get_signed_type_minmax): Declare.
484 * guile/README: New file.
485 * guile/guile-internal.h: New file.
486 * guile/guile.c: New file.
487 * guile/guile.h: New file.
488 * guile/scm-arch.c: New file.
489 * guile/scm-auto-load.c: New file.
490 * guile/scm-block.c: New file.
491 * guile/scm-breakpoint.c: New file.
492 * guile/scm-disasm.c: New file.
493 * guile/scm-exception.c: New file.
494 * guile/scm-frame.c: New file.
495 * guile/scm-gsmob.c: New file.
496 * guile/scm-iterator.c: New file.
497 * guile/scm-lazy-string.c: New file.
498 * guile/scm-math.c: New file.
499 * guile/scm-objfile.c: New file.
500 * guile/scm-ports.c: New file.
501 * guile/scm-pretty-print.c: New file.
502 * guile/scm-safe-call.c: New file.
503 * guile/scm-string.c: New file.
504 * guile/scm-symbol.c: New file.
505 * guile/scm-symtab.c: New file.
506 * guile/scm-type.c: New file.
507 * guile/scm-utils.c: New file.
508 * guile/scm-value.c: New file.
509 * guile/lib/gdb.scm: New file.
510 * guile/lib/gdb/boot.scm: New file.
511 * guile/lib/gdb/experimental.scm: New file.
512 * guile/lib/gdb/init.scm: New file.
513 * guile/lib/gdb/iterator.scm: New file.
514 * guile/lib/gdb/printing.scm: New file.
515 * guile/lib/gdb/types.scm: New file.
516 * data-directory/Makefile.in (GUILE_SRCDIR): New variable.
517 (VPATH): Add $(GUILE_SRCDIR).
518 (GUILE_DIR): New variable.
519 (GUILE_INSTALL_DIR, GUILE_FILES): New variables.
520 (all): Add stamp-guile dependency.
521 (stamp-guile): New rule.
522 (clean-guile, install-guile, uninstall-guile): New rules.
523 (install-only): Add install-guile dependency.
524 (uninstall): Add uninstall-guile dependency.
525 (clean): Add clean-guile dependency.
527 2014-02-09 Doug Evans <xdje42@gmail.com>
529 Revert this patch (which I approved, mea culpa).
531 2014-02-08 Mark Kettenis <kettenis@gnu.org>
533 * Makefile.in (all-lib): Remove.
534 ($(LIBGNU) $(GNULIB_H)): Replace with gits of remove all-lib target.
536 2014-02-09 Jan Kratochvil <jan.kratochvil@redhat.com>
538 Fix Python stack corruption.
539 * python/py-linetable.c (ltpy_get_pcs_for_line, ltpy_has_line): Use
542 2014-02-08 Mark Kettenis <kettenis@gnu.org>
544 * Makefile.in (all-lib): Remove.
545 ($(LIBGNU) $(GNULIB_H)): Replace with gits of remove all-lib target.
547 2014-02-07 Doug Evans <dje@google.com>
549 * extension-priv.h (extension_language_script_ops): Add comment.
550 (extension_language_ops): Add comment.
551 (active_ext_lang_state): Fix typo in comment.
553 2014-02-07 Pedro Alves <palves@redhat.com>
555 * infrun.c (handle_signal_stop) <signal arrives while stepping
556 over a breakpoint>: Switch back to the stepping thread.
558 2014-02-07 Yao Qi <yao@codesourcery.com>
560 * target.c (target_xfer_partial): Return zero if LEN is zero.
562 2014-02-07 Yao Qi <yao@codesourcery.com>
564 * auxv.c (procfs_xfer_auxv): Replace -1 with TARGET_XFER_E_IO.
565 (ld_so_xfer_auxv): Likewise.
566 * bfd-target.c (target_bfd_xfer_partial): Likewise.
567 * bsd-kvm.c (bsd_kvm_xfer_partial): Likewise.
568 * corelow.c (core_xfer_partial): Likewise.
569 * ctf.c (ctf_xfer_partial): Likewise.
570 * darwin-nat.c (darwin_read_dyld_info): Likewise.
571 (darwin_xfer_partial): Likewise.
572 * exec.c (exec_xfer_partial): Likewise.
573 * gnu-nat.c (gnu_xfer_partial): Likewise.
574 * ia64-hpux-nat.c (ia64_hpux_xfer_uregs): Likewise.
575 * inf-ptrace.c (inf_ptrace_xfer_partial): Likewise.
576 * inf-ttrace.c (inf_ttrace_xfer_partial): Likewise.
577 * linux-nat.c (linux_xfer_siginfo): Likewise.
578 (linux_proc_xfer_spu): Likewise.
579 * procfs.c (procfs_xfer_partial): Likewise.
580 * record-full.c (record_full_xfer_partial): Likewise.
581 (record_full_core_xfer_partial): Likewise.
582 * remote-sim.c (gdbsim_xfer_partial): Likewise.
583 * remote.c (remote_write_qxfer): Likewise.
584 (remote_write_qxfer, remote_read_qxfer): Likewise.
585 (remote_xfer_partial): Likewise.
586 * rs6000-nat.c (rs6000_xfer_partial): Likewise.
587 (rs6000_xfer_shared_libraries): Likewise.
588 * sparc-nat.c (sparc_xfer_wcookie): Likewise.
589 * spu-linux-nat.c (spu_proc_xfer_spu): Likewise.
590 (spu_xfer_partial): Likewise.
591 * target.c (memory_xfer_partial_1): Likewise.
592 * tracepoint.c (tfile_xfer_partial): Likewise.
593 * windows-nat.c (windows_xfer_shared_libraries): Likewise.
594 (windows_xfer_partial): Likewise.
596 2014-02-07 Yao Qi <yao@codesourcery.com>
598 * gdbarch.sh (core_xfer_shared_libraries): Returns ULONGEST. Add
600 (core_xfer_shared_libraries_aix): Likewise.
601 * gdbarch.c, gdbarch.h: Regenerated.
602 * i386-cygwin-tdep.c (windows_core_xfer_shared_libraries): Return
603 ULONGEST. Change 'len_avail' type to ULONGEST.
604 * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise.
605 * rs6000-aix-tdep.h (rs6000_aix_ld_info_to_xml): Update
607 (rs6000_aix_core_xfer_shared_libraries_aix): Return ULONGEST.
609 2014-02-07 Yao Qi <yao@codesourcery.com>
611 * corefile.c (memory_error): Get 'exception' from ERR and pass
612 'exception' to throw_error.
614 2014-02-06 Doug Evans <xdje42@gmail.com>
616 * configure.ac (libpython checking): Remove all but python.o from
617 CONFIG_OBS. Remove all but python.c from CONFIG_SRCS.
618 * configure: Regenerate.
620 * Makefile.in (SFILES): Add extension.c.
621 (HFILES_NO_SRCDIR): Add extension.h, extension-priv.h
622 (COMMON_OBS): Add extension.o.
623 * extension.h: New file.
624 * extension-priv.h: New file.
625 * extension.c: New file.
627 * python/python-internal.h: #include "extension.h".
628 (gdbpy_auto_load_enabled): Declare.
629 (gdbpy_apply_val_pretty_printer): Declare.
630 (gdbpy_apply_frame_filter): Declare.
631 (gdbpy_preserve_values): Declare.
632 (gdbpy_breakpoint_cond_says_stop): Declare.
633 (gdbpy_breakpoint_has_cond): Declare.
634 (void source_python_script_for_objfile): Delete.
635 * python/python.c: #include "extension-priv.h".
636 Delete inclusion of "observer.h".
637 (extension_language_python): Moved here and renamed from
638 script_language_python in py-auto-load.c.
639 Redefined to be of type extension_language_defn.
640 (python_extension_script_ops): New global.
641 (python_extension_ops): New global.
642 (struct python_env): New member previous_active.
643 (restore_python_env): Call restore_active_ext_lang.
644 (ensure_python_env): Call set_active_ext_lang.
645 (gdbpy_clear_quit_flag): Renamed from clear_quit_flag, made static.
647 (gdbpy_set_quit_flag): Renamed from set_quit_flag, made static.
649 (gdbpy_check_quit_flag): Renamed from check_quit_flag, made static.
651 (gdbpy_eval_from_control_command): Renamed from
652 eval_python_from_control_command, made static. New arg extlang.
653 (gdbpy_source_script) Renamed from source_python_script, made static.
655 (gdbpy_before_prompt_hook): Renamed from before_prompt_hook. Change
656 result to int. New arg extlang.
657 (gdbpy_source_objfile_script): Renamed from
658 source_python_script_for_objfile, made static. New arg extlang.
659 (gdbpy_start_type_printers): Renamed from start_type_printers, made
660 static. New args extlang, extlang_printers. Change result type to
662 (gdbpy_apply_type_printers): Renamed from apply_type_printers, made
663 static. New arg extlang. Rename arg printers to extlang_printers
664 and change type to ext_lang_type_printers *.
665 (gdbpy_free_type_printers): Renamed from free_type_printers, made
666 static. Replace argument arg with extlang, extlang_printers.
667 (!HAVE_PYTHON, eval_python_from_control_command): Delete.
668 (!HAVE_PYTHON, source_python_script): Delete.
669 (!HAVE_PYTHON, gdbpy_should_stop): Delete.
670 (!HAVE_PYTHON, gdbpy_breakpoint_has_py_cond): Delete.
671 (!HAVE_PYTHON, start_type_printers): Delete.
672 (!HAVE_PYTHON, apply_type_printers): Delete.
673 (!HAVE_PYTHON, free_type_printers): Delete.
674 (_initialize_python): Delete call to observer_attach_before_prompt.
675 (finalize_python): Set/restore active extension language.
676 (gdbpy_finish_initialization) Renamed from
677 finish_python_initialization, made static. New arg extlang.
678 (gdbpy_initialized): New function.
679 * python/python.h: #include "extension.h". Delete #include
680 "value.h", "mi/mi-cmds.h".
681 (extension_language_python): Declare.
682 (GDBPY_AUTO_FILE_NAME): Delete.
683 (enum py_bt_status): Moved to extension.h and renamed to
685 (enum frame_filter_flags): Moved to extension.h.
686 (enum py_frame_args): Moved to extension.h and renamed to
688 (finish_python_initialization): Delete.
689 (eval_python_from_control_command): Delete.
690 (source_python_script): Delete.
691 (apply_val_pretty_printer): Delete.
692 (apply_frame_filter): Delete.
693 (preserve_python_values): Delete.
694 (gdbpy_script_language_defn): Delete.
695 (gdbpy_should_stop, gdbpy_breakpoint_has_py_cond): Delete.
696 (start_type_printers, apply_type_printers, free_type_printers): Delete.
698 * auto-load.c: #include "extension.h".
699 (GDB_AUTO_FILE_NAME): Delete.
700 (auto_load_gdb_scripts_enabled): Make public. New arg extlang.
701 (script_language_gdb): Delete, moved to extension.c and renamed to
702 extension_language_gdb.
703 (source_gdb_script_for_objfile): Delete.
704 (auto_load_pspace_info): New member unsupported_script_warning_printed.
705 (loaded_script): Change type of language member to
706 struct extension_language_defn *.
707 (init_loaded_scripts_info): Initialize
708 unsupported_script_warning_printed.
709 (maybe_add_script): Make static. Change type of language arg to
710 struct extension_language_defn *.
711 (clear_section_scripts): Reset unsupported_script_warning_printed.
712 (auto_load_objfile_script_1): Rewrite to use extension language API.
713 (auto_load_objfile_script): Make public. Remove support-compiled-in
714 and auto-load-enabled checks, moved to auto_load_scripts_for_objfile.
715 (source_section_scripts): Rewrite to use extension language API.
716 (load_auto_scripts_for_objfile): Rewrite to use
717 auto_load_scripts_for_objfile.
718 (collect_matching_scripts_data): Change type of language member to
719 struct extension_language_defn *.
720 (auto_load_info_scripts): Change type of language arg to
721 struct extension_language_defn *.
722 (unsupported_script_warning_print): New function.
723 (script_not_found_warning_print): Make static.
724 (_initialize_auto_load): Rewrite construction of scripts-directory
726 * auto-load.h (struct objfile): Add forward decl.
727 (struct script_language): Delete.
728 (struct auto_load_pspace_info): Add forward decl.
729 (struct extension_language_defn): Add forward decl.
730 (maybe_add_script): Delete.
731 (auto_load_objfile_script): Declare.
732 (script_not_found_warning_print): Delete.
733 (auto_load_info_scripts): Update prototype.
734 (auto_load_gdb_scripts_enabled): Declare.
735 * python/py-auto-load.c (gdbpy_auto_load_enabled): Renamed from
736 auto_load_python_scripts_enabled and made public.
737 (script_language_python): Delete, moved to python.c.
738 (gdbpy_script_language_defn): Delete.
739 (info_auto_load_python_scripts): Update to use
740 extension_language_python.
742 * breakpoint.c (condition_command): Replace call to
743 gdbpy_breakpoint_has_py_cond with call to get_breakpoint_cond_ext_lang.
744 (bpstat_check_breakpoint_conditions): Replace call to gdbpy_should_stop
745 with call to breakpoint_ext_lang_cond_says_stop.
746 * python/py-breakpoint.c (gdbpy_breakpoint_cond_says_stop): Renamed
747 from gdbpy_should_stop. Change result type to enum scr_bp_stop.
748 New arg slang. Return SCR_BP_STOP_UNSET if py_bp_object is NULL.
749 (gdbpy_breakpoint_has_cond): Renamed from gdbpy_breakpoint_has_py_cond.
751 (local_setattro): Print name of extension language with existing
754 * valprint.c (val_print, value_print): Update to call
755 apply_ext_lang_val_pretty_printer.
756 * cp-valprint.c (cp_print_value): Update call to
757 apply_ext_lang_val_pretty_printer.
758 * python/py-prettyprint.c: Remove #ifdef HAVE_PYTHON.
759 (gdbpy_apply_val_pretty_printer): Renamed from
760 apply_val_pretty_printer. New arg extlang.
761 (!HAVE_PYTHON, apply_val_pretty_printer): Delete.
763 * cli/cli-cmds.c (source_script_from_stream): Rewrite to use
764 extension language API.
765 * cli/cli-script.c (execute_control_command): Update to call
766 eval_ext_lang_from_control_command.
768 * mi/mi-cmd-stack.c (mi_cmd_stack_list_frames): Update to use
769 enum ext_lang_bt_status values. Update call to
770 apply_ext_lang_frame_filter.
771 (mi_cmd_stack_list_locals): Ditto.
772 (mi_cmd_stack_list_args): Ditto.
773 (mi_cmd_stack_list_variables): Ditto.
774 * mi/mi-main.c: Delete #include "python/python-internal.h".
775 Add #include "extension.h".
776 (mi_cmd_list_features): Replace reference to python internal variable
777 gdb_python_initialized with call to ext_lang_initialized_p.
779 * stack.c (backtrace_command_1): Update to use enum ext_lang_bt_status.
780 Update to use enum ext_lang_frame_args. Update to call
781 apply_ext_lang_frame_filter.
782 * python/py-framefilter.c (extract_sym): Update to use enum
784 (extract_value, py_print_type, py_print_value): Ditto.
785 (py_print_single_arg, enumerate_args, enumerate_locals): Ditto.
786 (py_mi_print_variables, py_print_locals, py_print_args): Ditto.
787 (py_print_frame): Ditto.
788 (gdbpy_apply_frame_filter): Renamed from apply_frame_filter.
789 New arg extlang. Update to use enum ext_lang_bt_status.
791 * top.c (gdb_init): Delete #ifdef HAVE_PYTHON call to
792 finish_python_initialization. Replace with call to
793 finish_ext_lang_initialization.
795 * typeprint.c (do_free_global_table): Update to call
796 free_ext_lang_type_printers.
797 (create_global_typedef_table): Update to call
798 start_ext_lang_type_printers.
799 (find_global_typedef): Update to call apply_ext_lang_type_printers.
800 * typeprint.h (struct ext_lang_type_printers): Add forward decl.
801 (type_print_options): Change type of global_printers from "void *"
802 to "struct ext_lang_type_printers *".
804 * value.c (preserve_values): Update to call preserve_ext_lang_values.
805 * python/py-value.c: Remove #ifdef HAVE_PYTHON.
806 (gdbpy_preserve_values): Renamed from preserve_python_values.
808 (!HAVE_PYTHON, preserve_python_values): Delete.
810 * utils.c (quit_flag): Delete, moved to extension.c.
811 (clear_quit_flag, set_quit_flag, check_quit_flag): Delete, moved to
814 * eval.c: Delete #include "python/python.h".
815 * main.c: Delete #include "python/python.h".
817 * defs.h: Update comment.
819 2014-02-06 Joel Brobecker <brobecker@adacore.com>
823 2014-02-05 Mark Kettenis <kettenis@gnu.org>
825 * c-exp.y (YYPRINT, c_print_token): Only define if YYBISON is
828 2014-02-05 Yao Qi <yao@codesourcery.com>
830 * remote.c (remote_pass_signals): Remove local 'buf' and use
832 (remote_program_signals): Likewise.
834 2014-02-05 Yao Qi <yao@codesourcery.com>
836 * ctf.c: Include "inferior.h" and "gdbthread.h".
837 (CTF_PID): A new macro.
838 (ctf_open): Call inferior_appeared and add_thread_silent.
839 (ctf_close): Call exit_inferior_silent and set inferior_ptid.
840 (ctf_thread_alive): New function.
841 (init_ctf_ops): Install ctf_thread_alive to to_thread_alive.
843 2014-02-05 Yao Qi <yao@codesourcery.com>
847 2013-05-24 Yao Qi <yao@codesourcery.com>
849 * tracepoint.c (TFILE_PID): Remove.
850 (tfile_open): Don't add thread and inferior.
851 (tfile_close): Don't set 'inferior_ptid'. Don't call
852 exit_inferior_silent.
853 (tfile_thread_alive): Remove.
854 (init_tfile_ops): Don't set field 'to_thread_alive' of
857 2014-02-04 Christian Eggers <ceggers@gmx.de> (tiny change)
859 * remote.c (remote_start_remote): Call remote_check_symbols even
860 if only symbol-file (not file) has been given.
862 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
864 * gdbarch.sh (skip_entrypoint): New callback.
865 * gdbarch.c, gdbarch.h: Regenerate.
866 * symtab.c (skip_prologue_sal): Call gdbarch_skip_entrypoint.
867 * infrun.c (fill_in_stop_func): Likewise.
868 * ppc-linux-tdep.c: Include "elf/ppc64.h".
869 (ppc_elfv2_elf_make_msymbol_special): New function.
870 (ppc_elfv2_skip_entrypoint): Likewise.
871 (ppc_linux_init_abi): Install them for ELFv2.
873 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
875 * ppc-sysv-tdep.c (ppc64_aggregate_candidate): New routine.
876 (ppc64_elfv2_abi_homogeneous_aggregate): Likewise.
877 (ppc64_sysv_abi_push_param): Handle ELFv2 homogeneous structs.
878 (ppc64_sysv_abi_return_value): Likewise. Also, handle small
879 structures returned in GPRs.
881 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
883 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): Use correct
884 offset to the stack parameter list for the ELFv2 ABI.
886 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
888 * ppc-linux-tdep.c (ppc_linux_init_abi): Only call
889 set_gdbarch_convert_from_func_ptr_addr and
890 set_gdbarch_elf_make_msymbol_special for ELFv1.
891 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_param): Only handle
892 function descriptors on ELFv1.
893 (ppc64_sysv_abi_push_dummy_call): Likewise. On ELFv2,
894 set up r12 at function entry.
896 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
898 * ppc-tdep.h (enum powerpc_elf_abi): New data type.
899 (struct gdbarch_tdep): New member elf_abi.
901 * rs6000-tdep.c: Include "elf/ppc64.h".
902 (rs6000_gdbarch_init): Detect ELF ABI version.
904 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
906 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_freg): Use correct order
907 within a register pair holding a DFP 128-bit value on little-endian.
908 (ppc64_sysv_abi_return_value_base): Likewise.
909 * rs6000-tdep.c (dfp_pseudo_register_read): Likewise.
910 (dfp_pseudo_register_write): Likewise.
912 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
914 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_freg): Use correct
915 offset on little-endian when passing _Decimal32.
916 (ppc64_sysv_abi_return_value_base): Likewise for return values.
918 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
920 * rs6000-tdep.c (efpr_pseudo_register_read): Use correct offset
921 of the overlapped FP register within the VSX register on little-
923 (efpr_pseudo_register_write): Likewise.
925 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
927 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_val): Use correct
928 offset on little-endian when passing small structures.
930 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
932 * ppc-sysv-tdep.c (get_decimal_float_return_value): Update comment.
933 (struct ppc64_sysv_argpos): New data structure.
934 (ppc64_sysv_abi_push_float): Remove.
935 (ppc64_sysv_abi_push_val): New function.
936 (ppc64_sysv_abi_push_integer): Likewise.
937 (ppc64_sysv_abi_push_freg): Likewise.
938 (ppc64_sysv_abi_push_vreg): Likewise.
939 (ppc64_sysv_abi_push_param): Likewise.
940 (ppc64_sysv_abi_push_dummy_call): Refactor to use those new routines.
941 (ppc64_sysv_abi_return_value_base): New function.
942 (ppc64_sysv_abi_return_value): Refactor to use it.
944 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
946 * NEWS: Document new target powerpc64le-*-linux*.
948 2014-02-04 Mark Kettenis <kettenis@gnu.org>
950 * sparc64obsd-tdep.c (sparc64obsd_gregset): New variable.
951 (sparc64obsd_supply_gregset): Handle registers sets used in ELF
953 (sparc64obsd_init_abi): Adjust minimum size of the general purpose
954 register set used in ELF core dumps. Add floating-point register set.
956 2014-02-03 Kevin Buettner <kevinb@redhat.com>
958 * mn10300-tdep.c (mn10300_dwarf2_reg_to_regnum): Rewrite
959 dwarf2_to_gdb[] table using symbolic constants. Adjust
960 penultimate entry from number representing the PC register
961 to symbolic constant representing the MDR register. Add
962 constant for the PC register to the end of the table.
964 2014-02-03 Mark Kettenis <kettenis@gnu.org>
966 * bsd-kvm.c: Include <sys/param.h>
968 2014-02-03 Mark Kettenis <kettenis@gnu.org>
970 * sparc64nbsd-nat.c (sparc64nbsd_supply_fpregset): Fix prototype.
972 2014-01-31 Joel Brobecker <brobecker@adacore.com>
974 * ada-lang.h (clear_ada_sym_cache): Delete.
976 2014-01-30 Ulrich Weigand <uweigand@de.ibm.com>
978 * auxv.c (fprint_target_auxv): Handle AT_HWCAP2.
980 2014-01-29 Jose E. Marchesi <jose.marchesi@oracle.com>
982 * sparc64-linux-tdep.c (sparc64_linux_step_trap): Get PC from
983 the sigreturn register save area only if the syscall is
986 2014-01-29 Joel Brobecker <brobecker@adacore.com>
988 * valops.c (value_slice): Minor reformatting.
990 2014-01-28 Ulrich Weigand <uweigand@de.ibm.com>
992 * ppc64-tdep.c (ppc64_standard_linkage7): Fix typo.
994 2014-01-28 Joel Brobecker <brobecker@adacore.com>
996 * ada-lang.c (maint_set_ada_cmdlist, maint_show_ada_cmdlist):
998 (maint_set_ada_cmd, maint_show_ada_cmd): New functions.
999 (ada_ignore_descriptive_types_p): New static global.
1000 (find_parallel_type_by_descriptive_type): Return immediately
1001 if ada_ignore_descriptive_types_p is set.
1002 (_initialize_ada_language): Register new commands "maintenance
1003 set ada", "maintenance show ada", "maintenance set ada
1004 ignore-descriptive-types" and "maintenance show ada
1005 ignore-descriptive-types".
1006 * NEWS: Add entry for new "maint ada set/show
1007 ignore-descriptive-types" commands.
1009 2014-01-27 Markus Metzger <markus.t.metzger@intel.com>
1011 * record-btrace.c (record_btrace_close): Call btrace_teardown
1014 2014-01-27 Joel Brobecker <brobecker@adacore.com>
1016 * ada-lang.c: Remove "#ifdef UI_OUT" condition for including
1019 2014-01-27 Joel Brobecker <brobecker@adacore.com>
1021 * ada-typeprint (type_is_full_subrange_of_target_type):
1023 (print_range): Add parameter bounds_prefered_p. If not set,
1024 try printing range types using the name of their base type.
1025 (print_range_type): Add parameter bounds_prefered_p.
1026 Use it in call to print_range.
1027 (print_array_type, ada_print_type): Update calls to print_range
1028 and print_range_type.
1030 2014-01-27 Joel Brobecker <brobecker@adacore.com>
1032 * ada-typeprint.c (print_array_type, print_choices, print_range)
1033 (print_range_bound, print_dynamic_range_bound, print_range_type):
1036 2014-01-27 Joel Brobecker <brobecker@adacore.com>
1038 * ada-typeprint.c (print_range): Add missing empty line
1039 after local declaration.
1041 2014-01-27 Joel Brobecker <brobecker@adacore.com>
1043 * ada-valprint.c (print_optional_low_bound): Get index_type's
1044 target type for as long as it is a TYPE_CODE_RANGE.
1046 2014-01-27 Joel Brobecker <brobecker@adacore.com>
1048 * procfs.c (procfs_make_note_section): Remove assertion and
1051 2014-01-24 Yao Qi <yao@codesourcery.com>
1053 * remote.c (remote_read_bytes): Change type of len to ULONGEST.
1054 * corelow.c (get_core_siginfo): Likewise.
1056 2014-01-24 Yao Qi <yao@codesourcery.com>
1058 * remote.c (remote_write_bytes_aux): Change type of 'len' to
1059 ULONGEST. Don't check 'len' is negative.
1060 (remote_write_bytes): Change type of 'len' to ULONGEST.
1062 2014-01-23 Tom Tromey <tromey@redhat.com>
1065 * python/lib/gdb/FrameDecorator.py: (FrameVars.fetch_frame_args):
1066 Handle exception from frame.block.
1067 (FrameVars.fetch_frame_locals): Likewise.
1069 2014-01-23 Tom Tromey <tromey@redhat.com>
1072 * python/py-framefilter.c (py_print_frame): Don't call Py_DECREF
1073 on a NULL pointer. Move "goto error" to correct place.
1075 2014-01-23 Tom Tromey <tromey@redhat.com>
1078 * python/py-framefilter.c (apply_frame_filter): Call
1079 ensure_python_env after computing gdbarch.
1081 2014-01-23 Yao Qi <yao@codesourcery.com>
1083 * target.c (raw_memory_xfer_partial): Change argument type
1084 from void * to gdb_byte *.
1085 (memory_xfer_partial_1, memory_xfer_partial): Likewise.
1087 2014-01-22 Doug Evans <dje@google.com>
1089 New gdbserver option --debug-format=timestamp.
1092 2014-01-22 Andreas Arnez <arnez@vnet.linux.ibm.com>
1094 * syscalls/s390x-linux.xml: New file.
1095 * syscalls/s390-linux.xml: New file.
1096 * s390-linux-tdep.c (XML_SYSCALL_FILENAME_S390): New macro.
1097 (XML_SYSCALL_FILENAME_S390X): Likewise.
1098 (op_svc): New enum value for SVC opcode.
1099 (s390_sigtramp_frame_sniffer): Replace literal by 'op_svc'.
1100 (s390_linux_get_syscall_number): New function.
1101 (s390_gdbarch_init): Register '*get_syscall_number' and the
1102 syscall xml file name.
1103 * data-directory/Makefile.in (SYSCALLS_FILES): Add
1104 "s390-linux.xml" and "s390x-linux.xml".
1105 * NEWS: Announce new feature.
1107 2014-01-22 Baruch Siach <baruch@tkos.co.il>
1109 * xtensa-tdep.h (xtensa_elf_greg_t): Change type to uint32_t.
1111 2014-01-22 Pedro Alves <palves@redhat.com>
1113 * xtensa-config.c: Include defs.h.
1115 2014-01-22 Joel Brobecker <brobecker@adacore.com>
1117 * common/common-utils.h: Add "ARI:" comment beside __func__
1120 2014-01-22 Joel Brobecker <brobecker@adacore.com>
1122 * common/common-utils.h (FUNCTION_NAME): Expand the macro's
1123 documentation a bit.
1125 2014-01-21 Roland McGrath <mcgrathr@google.com>
1127 * configure.ac: Call AM_PROG_INSTALL_STRIP.
1128 * configure: Regenerate.
1129 * aclocal.m4: Regenerate.
1130 * Makefile.in (install_sh, INSTALL_STRIP_PROGRAM, STRIP):
1131 New substituted variables.
1132 (install-strip): New target.
1133 (INSTALL_SCRIPT): New substituted variable.
1134 (FLAGS_TO_PASS): Add it.
1135 (install-only): Use $(INSTALL_SCRIPT) rather than
1136 $(INSTALL_PROGRAM) for gcore.
1138 2014-01-20 Tom Tromey <tromey@redhat.com>
1140 * cli/cli-decode.h (struct cmd_list_element): Move all bitfields
1143 2014-01-20 Tom Tromey <tromey@redhat.com>
1145 * cli/cli-decode.c (add_cmd, deprecate_cmd, add_alias_cmd)
1146 (add_setshow_cmd_full, delete_cmd, lookup_cmd_1)
1147 (deprecated_cmd_warning, complete_on_cmdlist): Update.
1148 * cli/cli-decode.h (CMD_DEPRECATED, DEPRECATED_WARN_USER)
1149 (MALLOCED_REPLACEMENT, DOC_ALLOCATED): Remove.
1150 (struct cmd_list_element) <flags>: Remove.
1151 <cmd_deprecated, deprecated_warn_user, malloced_replacement,
1152 doc_allocated>: New fields.
1153 <hook_in, allow_unknown, abbrev_flag, type, var_type>: Now
1155 * maint.c (maintenance_do_deprecate): Update.
1156 * top.c (execute_command): Update.
1158 2014-01-20 Baruch Siach <baruch@tkos.co.il>
1160 * xtensa-linux-nat.c: Include asm/ptrace.h.
1162 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
1164 * Makefile.in (SFILES): Add d-support.c.
1165 (COMMON_OBS): Add d-support.o.
1166 * d-lang.h (d_parse_symbol): Add comment, now defined in
1168 * d-lang.c (parse_call_convention)
1169 (parse_attributes, parse_function_types)
1170 (parse_function_args, parse_type, parse_identifier)
1171 (call_convention_p, d_parse_symbol): Move functions to ...
1172 * d-support.c: ... New file.
1174 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
1176 * d-lang.h (d_parse_symbol): Add declaration.
1177 * d-lang.c (extract_identifiers)
1178 (extract_type_info): Remove functions.
1179 (parse_call_convention, parse_attributes)
1180 (parse_function_types, parse_function_args)
1181 (parse_type, parse_identifier, call_convention_p)
1182 (d_parse_symbol): New functions.
1183 (d_demangle): Use d_parse_symbol to demangle D symbols.
1185 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
1187 * d-lang.h (struct builtin_d_type): New data type.
1188 (builtin_d_type): Add declaration.
1189 * d-lang.c (d_language_arch_info, build_d_types)
1190 (builtin_d_type): New functions.
1191 (enum d_primitive_types): New data type.
1192 (d_language_defn): Change c_language_arch_info to
1193 d_language_arch_info.
1194 (d_type_data): New static variable.
1195 (_initialize_d_language): Initialize d_type_data.
1197 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
1199 * d-lang.h (d_main_name): Add declaration.
1200 * d-lang.c (d_main_name): New function.
1201 * symtab.c (find_main_name): Add call to d_main_name.
1203 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
1205 * d-lang.c (d_language_defn): Change macro_expansion_c to
1208 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
1210 * MAINTAINERS: Add myself as a write-after-approval maintainer.
1212 2014-01-17 Sergio Durigan Junior <sergiodj@redhat.com>
1214 * breakpoint.c (insert_bp_location): Add "volatile" keyword to "struct
1215 gdb_exception" declaration.
1216 * remote.c (getpkt_or_notif_sane): Likewise.
1218 2014-01-17 Doug Evans <dje@google.com>
1220 * common/gdb_vecs.c (delim_string_to_char_ptr_vec_append): New
1221 function, contents of dirnames_to_char_ptr_vec_append moved here.
1222 (delim_string_to_char_ptr_vec): New function.
1223 (dirnames_to_char_ptr_vec_append): Rewrite.
1224 * common/gdb_vecs.h (delim_string_to_char_ptr_vec): Declare.
1226 2014-01-17 Doug Evans <dje@google.com>
1228 * common/common-utils.h (FUNCTION_NAME): Renamed from ASSERT_FUNCTION,
1230 * common/gdb_assert.h (ASSERT_FUNCTION): ... from here.
1231 #include "common-utils.h".
1232 (gdb_assert, gdb_assert_fail, gdb_assert_not_reached): Update.
1233 * common/vec.h (VEC_ASSERT_PASS): Update.
1234 * darwin-nat.h: Replace #include of gdb_assert.h with common-utils.h.
1235 (MACH_CHECK_ERROR): Update.
1237 2014-01-17 Simon Marchi <simon.marchi@ericsson.com>
1239 * gdbarch.sh (gdbarch_address_class_name_to_type_flags): Add
1241 * gdbarch.h: Regenerate.
1243 2014-01-16 Tom Tromey <tromey@redhat.com>
1245 * value.c (struct value) <regnum>: Move earlier.
1247 2014-01-16 Tom Tromey <tromey@redhat.com>
1249 * remote.c (extended_remote_create_inferior): Rename from
1250 extended_remote_create_inferior_1. Add "ops" argument. Remove
1253 2014-01-16 Pedro Alves <palves@redhat.com>
1255 * s390-linux-tdep.c (s390_frame_unwind_cache): Swallow
1256 NOT_AVAILABLE_ERROR errors while parsing the prologue or reading
1259 2014-01-16 Doug Evans <dje@google.com>
1261 * dwarf2read.c (open_and_init_dwp_file): Fix typo in comment.
1263 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1265 * btrace.h (btrace_thread_flag): New.
1266 (struct btrace_thread_info) <flags>: New.
1267 * record-btrace.c (record_btrace_resume_thread)
1268 (record_btrace_find_thread_to_move, btrace_step_no_history)
1269 (btrace_step_stopped, record_btrace_start_replaying)
1270 (record_btrace_step_thread, record_btrace_decr_pc_after_break)
1271 (record_btrace_find_resume_thread): New.
1272 (record_btrace_resume, record_btrace_wait): Extend.
1273 (record_btrace_can_execute_reverse): New.
1274 (record_btrace_open): Fail in non-stop mode.
1275 (record_btrace_set_replay): Split into this, ...
1276 (record_btrace_stop_replaying): ... this, ...
1277 (record_btrace_clear_histories): ... and this.
1278 (init_record_btrace_ops): Init to_can_execute_reverse.
1279 * NEWS: Announce it.
1281 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1283 * target.h (struct target_ops) <to_decr_pc_after_break>: New.
1284 (forward_target_decr_pc_after_break)
1285 (target_decr_pc_after_break): New.
1286 * target.c (forward_target_decr_pc_after_break)
1287 (target_decr_pc_after_break): New.
1288 * aix-thread.c (aix_thread_wait): Call target_decr_pc_after_break
1289 instead of gdbarch_decr_pc_after_break.
1290 * darwin-nat.c (cancel_breakpoint): Call target_decr_pc_after_break
1291 instead of gdbarch_decr_pc_after_break.
1292 * infrun.c (adjust_pc_after_break): Call target_decr_pc_after_break
1293 instead of gdbarch_decr_pc_after_break.
1294 * linux-nat.c (cancel_breakpoint): Call target_decr_pc_after_break
1295 instead of gdbarch_decr_pc_after_break.
1296 * linux-thread-db.c (check_event): Call target_decr_pc_after_break
1297 instead of gdbarch_decr_pc_after_break.
1298 * record-full.c (record_full_wait_1): Call target_decr_pc_after_break
1299 instead of gdbarch_decr_pc_after_break.
1301 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1303 * btrace.c: Include regcache.h.
1304 (btrace_add_pc): New.
1305 (btrace_enable): Call btrace_add_pc.
1306 (btrace_is_empty): New.
1307 * btrace.h (btrace_is_empty): New.
1308 * record-btrace.c (require_btrace, record_btrace_info): Call
1311 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1313 * common/linux-btrace.c (perf_event_read_bts, linux_read_btrace):
1314 Support delta reads.
1315 (linux_disable_btrace): Change return type.
1316 * common/linux-btrace.h (linux_read_btrace): Change parameters
1317 and return type to allow error reporting. Update users.
1318 (linux_disable_btrace): Change return type. Update users.
1319 * common/btrace-common.h (btrace_read_type) <BTRACE_READ_DELTA>:
1321 (btrace_error): New.
1322 (btrace_block) <begin>: Comment on BEGIN == 0.
1323 * btrace.c (btrace_compute_ftrace): Start from the end of
1325 (btrace_stitch_trace, btrace_clear_history): New.
1326 (btrace_fetch): Read delta trace, return if replaying.
1327 (btrace_clear): Move clear history code to btrace_clear_history.
1328 (parse_xml_btrace): Throw an error if parsing failed.
1329 * target.h (struct target_ops) <to_read_btrace>: Change parameters
1330 and return type to allow error reporting.
1331 (target_read_btrace): Change parameters and return type to allow
1333 * target.c (target_read_btrace): Update.
1334 * remote.c (remote_read_btrace): Support delta reads. Pass
1336 * NEWS: Announce it.
1338 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1340 * record.h (record_btrace_frame_unwind)
1341 (record_btrace_tailcall_frame_unwind): New declarations.
1342 * dwarf2-frame: Include record.h
1343 (dwarf2_frame_cfa): Throw an error for btrace frames.
1344 * record-btrace.c: Include hashtab.h.
1345 (btrace_get_bfun_name): New.
1346 (btrace_call_history): Call btrace_get_bfun_name.
1347 (struct btrace_frame_cache): New.
1349 (bfcache_hash, bfcache_eq, bfcache_new): New.
1350 (btrace_get_frame_function): New.
1351 (record_btrace_frame_unwind_stop_reason): Allow unwinding.
1352 (record_btrace_frame_this_id): Compute own id.
1353 (record_btrace_frame_prev_register): Provide PC, throw_error
1354 for all other registers.
1355 (record_btrace_frame_sniffer): Detect btrace frames.
1356 (record_btrace_tailcall_frame_sniffer): New.
1357 (record_btrace_frame_dealloc_cache): New.
1358 (record_btrace_frame_unwind): Add new functions.
1359 (record_btrace_tailcall_frame_unwind): New.
1360 (_initialize_record_btrace): Allocate cache.
1361 * btrace.c (btrace_clear): Call reinit_frame_cache.
1362 * NEWS: Announce it.
1364 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1366 * record-btrace.c (record_btrace_set_replay)
1367 (record_btrace_goto_begin, record_btrace_goto_end)
1368 (record_btrace_goto): New.
1369 (init_record_btrace_ops): Initialize them.
1370 * NEWS: Announce it.
1372 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1374 * record-btrace.c (record_btrace_find_new_threads)
1375 (record_btrace_thread_alive): New.
1376 (init_record_btrace_ops): Initialize to_find_new_threads and
1379 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1381 * record-btrace.c (record_btrace_resume): New.
1382 (record_btrace_wait): New.
1383 (init_record_btrace_ops): Initialize to_wait and to_resume.
1385 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1387 * record-btrace.c (record_btrace_xfer_partial)
1388 (record_btrace_insert_breakpoint, record_btrace_remove_breakpoint)
1389 (record_btrace_allow_memory_access): New.
1390 (init_record_btrace_ops): Initialize new methods.
1391 * target.c (raw_memory_xfer_partial): Bail out if target reports
1392 that this memory is not available.
1394 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1396 * target.h (target_ops) <to_insert_breakpoint>
1397 <to_remove_breakpoint>: Add target_ops parameter.
1398 (forward_target_insert_breakpoint): New.
1399 (forward_target_remove_breakpoint): New.
1400 (memory_remove_breakpoint, memory_insert_breakpoint):
1401 Add target_ops parameter.
1402 * target.c (target_insert_breakpoint): Split into this and ...
1403 (forward_target_insert_breakpoint): ... this.
1404 (target_remove_breakpoint): Split into this and ...
1405 (forward_target_remove_breakpoint): ... this.
1406 (debug_to_insert_breakpoint): Add target_ops parameter.
1407 Call forward_target_insert_breakpoint.
1408 (debug_to_remove_breakpoint): Add target_ops parameter.
1409 Call forward_target_remove_breakpoint.
1410 (update_current_target): Do not inherit or default to_insert_breakpoint
1411 and to_remove_breakpoint.
1412 * corelow.c (ignore): Add target_ops parameter.
1413 * exec.c (ignore): Add target_ops parameter.
1414 * mem-break.c (memory_insert_breakpoint, memory_remove_breakpoint):
1415 Add target_ops parameter.
1416 * monitor.c (monitor_insert_breakpoint, monitor_remove_breakpoint):
1417 Add target_ops parameter.
1418 * nto-procfs.c (procfs_insert_breakpoint, procfs_remove_breakpoint):
1419 Add target_ops parameter.
1420 * record-full.c (record_full_beneath_to_insert_breakpoint)
1421 (record_full_beneath_to_remove_breakpoint, tmp_to_insert_breakpoint)
1422 (tmp_to_remove_breakpoint, record_full_insert_breakpoint)
1423 (record_full_remove_breakpoint, record_full_core_insert_breakpoint)
1424 (record_full_core_remove_breakpoint): Add target_ops parameter.
1426 (record_full_beneath_to_insert_breakpoint_ops)
1427 (record_full_beneath_to_remove_breakpoint_ops)
1428 (tmp_to_insert_breakpoint_ops, tmp_to_remove_breakpoint_ops): New.
1429 (record_full_open): Initialize tmp_to_insert_breakpoint_ops,
1430 tmp_to_remove_breakpoint_ops,
1431 record_full_beneath_to_insert_breakpoint_ops, and
1432 record_full_beneath_to_remove_breakpoint_ops.
1433 * remote-m32r-sdi.c (m32r_insert_breakpoint)
1434 (m32r_remove_breakpoint): Add target_ops parameter.
1435 * remote-mips.c (mips_insert_breakpoint, mips_remove_breakpoint):
1436 Add target_ops parameter.
1437 * remote.c (remote_insert_breakpoint, remote_remove_breakpoint):
1438 Add target_ops parameter.
1440 2014-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
1441 Markus Metzger <markus.t.metzger@intel.com>
1443 * record-btrace.c: Include frame-unwind.h.
1444 (record_btrace_frame_unwind_stop_reason)
1445 (record_btrace_frame_this_id, record_btrace_frame_prev_register)
1446 (record_btrace_frame_sniffer, record_btrace_frame_unwind):
1448 (init_record_btrace_ops): Install it.
1450 2014-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
1452 * frame.c (get_frame_unwind_stop_reason): Unconditionally call
1455 2014-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
1457 * dwarf2-frame.c (dwarf2_frame_cfa): Move UNWIND_UNAVAILABLE check
1460 2014-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
1462 * frame-unwind.c: Include target.h.
1463 (frame_unwind_try_unwinder): New function with code from ...
1464 (frame_unwind_find_by_frame): ... here. New variable
1465 unwinder_from_target, call also target_get_unwinder)
1466 (target_get_tailcall_unwinder, and frame_unwind_try_unwinder for it.
1467 * target.c (target_get_unwinder, target_get_tailcall_unwinder): New.
1468 * target.h (struct target_ops): New fields to_get_unwinder and
1469 to_get_tailcall_unwinder.
1470 (target_get_unwinder, target_get_tailcall_unwinder): New declarations.
1472 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1474 * record-btrace.c (record_btrace_fetch_registers)
1475 (record_btrace_store_registers)
1476 (record_btrace_to_prepare_to_store): New.
1477 (init_record_btrace_ops): Add the above.
1479 2014-01-16 Tom Tromey <tromey@redhat.com>
1481 * windows-nat.c (windows_prepare_to_store): Add 'self' argument.
1482 * target.h (struct target_ops) <to_prepare_to_store>: Add
1484 (target_prepare_to_store): Add argument.
1485 * target.c (debug_to_prepare_to_store): Add argument.
1486 (update_current_target): Update.
1487 * remote.c (remote_prepare_to_store): Add 'self' argument.
1488 * remote-sim.c (gdbsim_prepare_to_store): Add 'self' argument.
1489 * remote-mips.c (mips_prepare_to_store): Add 'self' argument.
1490 * remote-m32r-sdi.c (m32r_prepare_to_store): Add 'self' argument.
1491 * record-full.c (record_full_core_prepare_to_store): Add 'self'
1493 * ravenscar-thread.c (ravenscar_prepare_to_store): Add argument.
1494 * nto-procfs.c (procfs_prepare_to_store): Add 'self' argument.
1495 * monitor.c (monitor_prepare_to_store): Add 'self' argument.
1496 * inf-child.c (inf_child_prepare_to_store): Add 'self' argument.
1497 * go32-nat.c (go32_prepare_to_store): Add 'self' argument.
1499 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1501 * btrace.h (replay) <replay>: New.
1502 (btrace_is_replaying): New.
1503 * btrace.c (btrace_clear): Free replay iterator.
1504 (btrace_is_replaying): New.
1505 * record-btrace.c (record_btrace_is_replaying): New.
1506 (record_btrace_info): Print insn number if replaying.
1507 (record_btrace_insn_history): Start at replay position.
1508 (record_btrace_call_history): Start at replay position.
1509 (init_record_btrace_ops): Init to_record_is_replaying.
1511 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1513 * record-btrace.c (record_btrace_insn_history_range): Include
1515 (record_btrace_insn_history_from): Adjust range.
1516 (record_btrace_call_history_range): Include
1518 (record_btrace_call_history_from): Adjust range.
1519 * NEWS: Announce changes.
1521 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1523 * record.h (enum record_print_flag)
1524 <record_print_indent_calls>: New.
1525 * record.c (get_call_history_modifiers): Recognize /c modifier.
1526 (_initialize_record): Document /c modifier.
1527 * record-btrace.c (btrace_call_history): Add btinfo parameter.
1528 Reorder fields. Optionally indent the function name. Update
1530 * NEWS: Announce changes.
1532 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1534 * common/linux-btrace.c (linux_enable_btrace): Enlarge buffer.
1536 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1538 * btrace.c (ftrace_new_function): Start counting at one.
1539 * record-btrace.c (record_btrace_info): Adjust number of calls
1541 * NEWS: Announce it.
1543 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1545 * record-btrace.c (btrace_call_history_insn_range): Print
1546 insn range as [begin, end].
1548 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1550 * btrace.h (struct btrace_func_link): New.
1551 (enum btrace_function_flag): New.
1552 (struct btrace_inst): Rename to ...
1553 (struct btrace_insn): ...this. Update all users.
1554 (struct btrace_func) <ibegin, iend>: Remove.
1555 (struct btrace_func_link): New.
1556 (struct btrace_func): Rename to ...
1557 (struct btrace_function): ...this. Update all users.
1558 (struct btrace_function) <segment, flow, up, insn, insn_offset)
1559 (number, level, flags>: New.
1560 (struct btrace_insn_iterator): Rename to ...
1561 (struct btrace_insn_history): ...this.
1563 (struct btrace_insn_iterator, btrace_call_iterator): New.
1564 (struct btrace_target_info) <btrace, itrace, ftrace>: Remove.
1565 (struct btrace_target_info) <begin, end, level>
1566 <insn_history, call_history>: New.
1567 (btrace_insn_get, btrace_insn_number, btrace_insn_begin)
1568 (btrace_insn_end, btrace_insn_prev, btrace_insn_next)
1569 (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get)
1570 (btrace_call_number, btrace_call_begin, btrace_call_end)
1571 (btrace_call_prev, btrace_call_next, btrace_call_cmp)
1572 (btrace_find_function_by_number, btrace_set_insn_history)
1573 (btrace_set_call_history): New.
1574 * btrace.c (btrace_init_insn_iterator)
1575 (btrace_init_func_iterator, compute_itrace): Remove.
1576 (ftrace_print_function_name, ftrace_print_filename)
1577 (ftrace_skip_file): Change
1579 (ftrace_init_func): Remove.
1580 (ftrace_debug): Use new btrace_function fields.
1581 (ftrace_function_switched): Also consider gaining and
1582 losing symbol information).
1583 (ftrace_print_insn_addr, ftrace_new_call, ftrace_new_return)
1584 (ftrace_new_switch, ftrace_find_caller, ftrace_new_function)
1585 (ftrace_update_caller, ftrace_fixup_caller, ftrace_new_tailcall):
1587 (ftrace_new_function): Move. Remove debug print.
1588 (ftrace_update_lines, ftrace_update_insns): New.
1589 (ftrace_update_function): Check for call, ret, and jump.
1590 (compute_ftrace): Renamed to ...
1591 (btrace_compute_ftrace): ...this. Rewritten to compute call
1593 (btrace_fetch, btrace_clear): Updated.
1594 (btrace_insn_get, btrace_insn_number, btrace_insn_begin)
1595 (btrace_insn_end, btrace_insn_prev, btrace_insn_next)
1596 (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get)
1597 (btrace_call_number, btrace_call_begin, btrace_call_end)
1598 (btrace_call_prev, btrace_call_next, btrace_call_cmp)
1599 (btrace_find_function_by_number, btrace_set_insn_history)
1600 (btrace_set_call_history): New.
1601 * record-btrace.c (require_btrace): Use new btrace thread
1603 (record_btrace_info, btrace_insn_history)
1604 (record_btrace_insn_history, record_btrace_insn_history_range):
1605 Use new btrace thread info fields and new iterator.
1606 (btrace_func_history_src_line): Rename to ...
1607 (btrace_call_history_src_line): ...this. Use new btrace
1609 (btrace_func_history): Rename to ...
1610 (btrace_call_history): ...this. Use new btrace thread info
1611 fields and new iterator.
1612 (record_btrace_call_history, record_btrace_call_history_range):
1613 Use new btrace thread info fields and new iterator.
1615 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1617 * frame.h (frame_id_build_unavailable_stack_special): New.
1618 * frame.c (frame_id_build_unavailable_stack_special): New.
1620 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1622 * amd64-tdep.c (amd64_classify_insn_at, amd64_insn_is_call)
1623 (amd64_insn_is_ret, amd64_insn_is_jump, amd64_jmp_p): New.
1624 (amd64_init_abi): Add insn_is_call, insn_is_ret, and insn_is_jump
1626 * i386-tdep.c (i386_insn_is_call, i386_insn_is_ret)
1627 (i386_insn_is_jump, i386_jmp_p): New.
1628 (i386_gdbarch_init): Add insn_is_call, insn_is_ret, and
1629 insn_is_jump to gdbarch.
1630 * gdbarch.sh (insn_is_call, insn_is_ret, insn_is_jump): New.
1631 * gdbarch.h: Regenerated.
1632 * gdbarch.c: Regenerated.
1633 * arch-utils.h (default_insn_is_call, default_insn_is_ret)
1634 (default_insn_is_jump): New.
1635 * arch-utils.c (default_insn_is_call, default_insn_is_ret)
1636 (default_insn_is_jump): New.
1638 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1640 * common/btrace-common.h (btrace_read_type) <btrace_read_all>:
1642 (btrace_read_type) <BTRACE_READ_ALL>: ... this. Update users.
1643 (btrace_read_type) <btrace_read_new>: Change to ...
1644 (btrace_read_type) <BTRACE_READ_NEW>: ... this. Update users.
1646 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1648 * common/linux-btrace.c (linux_read_btrace): Free trace from
1651 2014-01-15 Doug Evans <dje@google.com>
1653 * dwarf2read.c (open_and_init_dwp_file): Use pulongest to print
1656 2014-01-15 Tom Tromey <tromey@redhat.com>
1658 * dbxread.c (process_one_symbol): Use set_objfile_main_name.
1659 * dwarf2read.c (read_partial_die): Use set_objfile_main_name.
1660 * objfiles.c (get_objfile_bfd_data): Initialize language_of_main.
1661 (set_objfile_main_name): New function.
1662 * objfiles.h (struct objfile_per_bfd_storage) <name_of_main,
1663 language_of_main>: New fields.
1664 (set_objfile_main_name): Declare.
1665 * symtab.c (find_main_name): Loop over objfiles to find the main
1667 (set_main_name): Now static.
1668 (get_main_info): Add comment.
1669 * symtab.h (set_main_name): Don't declare.
1671 2014-01-15 Tom Tromey <tromey@redhat.com>
1673 * symtab.c (main_progspace_key): New global.
1674 (struct main_info): New.
1675 (name_of_main, language_of_main): Remove.
1676 (get_main_info, main_info_cleanup): New function.
1677 (set_main_name, main_name, main_language): Use get_main_info.
1678 (_initialize_symtab): Initialize main_progspace_key.
1680 2014-01-15 Tom Tromey <tromey@redhat.com>
1682 * dbxread.c (process_one_symbol): Update.
1683 * dwarf2read.c (read_partial_die): Update.
1684 * symfile.c (set_initial_language): Call main_language.
1685 * symtab.c (language_of_main): Now static.
1686 (set_main_name): Add 'lang' parameter.
1687 (find_main_name): Update.
1688 (main_language): New function.
1689 (symtab_observer_executable_changed): Update.
1690 * symtab.h (set_main_name): Update.
1691 (language_of_main): Remove.
1692 (main_language): Declare.
1694 2014-01-15 Tom Tromey <tromey@redhat.com>
1696 * symfile.c (init_entry_point_info): Use new "initialized" field.
1698 * objfiles.h (struct entry_point) <initialized>: New field.
1699 (struct objfile_per_bfd_storage) <ei>: New field, moved from...
1700 (struct objfile) <ei>: ...here. Remove.
1701 * objfiles.c (entry_point_address_query): Update.
1703 2014-01-15 Tom Tromey <tromey@redhat.com>
1705 * objfiles.c (entry_point_address_query): Relocate entry point
1707 (objfile_relocate1): Do not relocate entry point address.
1708 * objfiles.h (struct entry_info) <entry_point>: Update comment.
1709 <the_bfd_section_index>: New field.
1710 * symfile.c (init_entry_point_info): Find the entry point's
1713 2014-01-15 Tom Tromey <tromey@redhat.com>
1715 * solib-frv.c (enable_break): Use entry_point_address_query.
1717 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
1719 * NEWS: Add note on improved process record-replay on
1720 arm*-linux* targets.
1722 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
1724 * arm-tdep.c (enum arm_record_result): New enum.
1725 (arm_record_unsupported_insn): New function.
1726 (arm_record_coproc_data_proc): Removed.
1727 (thumb2_record_ld_st_multiple): New function.
1728 (thumb2_record_ld_st_dual_ex_tbb): New function.
1729 (thumb2_record_data_proc_sreg_mimm): New function.
1730 (thumb2_record_ps_dest_generic): New function.
1731 (thumb2_record_branch_misc_cntrl): New function.
1732 (thumb2_record_str_single_data): New function.
1733 (thumb2_record_ld_mem_hints): New function.
1734 (thumb2_record_ld_word): New function.
1735 (thumb2_record_lmul_lmla_div): New function.
1736 (thumb2_record_decode_insn_handler): New function.
1737 (decode_insn): Add thumb32 instruction handlers.
1739 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
1741 * arm-linux-tdep.c: Include "record-full.h" and "linux-record.h".
1742 (struct arm_linux_record_tdep): Declare.
1743 (arm_canonicalize_syscall): New function.
1744 (arm_all_but_pc_registers_record): New function.
1745 (arm_linux_syscall_record): New function.
1746 (arm_linux_init_abi): Add syscall recording constructs.
1747 * arm-tdep.c (thumb_record_ldm_stm_swi): Update thumb syscall
1748 decoding. (arm_record_coproc_data_proc): Update arm syscall
1750 * arm-tdep.h (struct gdbarch_tdep) <arm_swi_record>: Remove.
1751 <arm_syscall_record>: New field.
1752 * configure.tgt (arm*-*-linux*): Add linux-record.o to
1755 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
1757 * arm-tdep.c (thumb_record_misc): Update to use sp as base
1758 register for push instruction recording.
1760 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
1762 * arm-tdep.c (thumb_record_misc): Update to correct logical
1763 error while recording ldm, ldmia and pop instructions.
1765 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
1767 * arm-tdep.c (struct arm_mem_r) <addr>: Change type to uint32_t.
1769 2014-01-15 Pedro Alves <palves@redhat.com>
1771 * go32-nat.c (go32_open, go32_close, go32_attach, go32_detach)
1772 (go32_resume, go32_fetch_registers, store_register)
1773 (go32_store_registers, go32_prepare_to_store)
1774 (go32_xfer_memory, go32_files_info, go32_kill_inferior)
1775 (go32_create_inferior, go32_can_run, go32_terminal_init)
1776 (go32_terminal_inferior, go32_terminal_ours): Delete forward
1779 2014-01-15 Tom Tromey <tromey@redhat.com>
1781 * target.h (async_callback_ftype): New typedef.
1782 (struct target_ops) <to_async>: Use it.
1784 2014-01-15 Joel Brobecker <brobecker@adacore.com>
1786 * python/py-value.c (get_field_type): Remove unnecessary curly
1787 braces for single-statement if block.
1789 2014-01-15 Joel Brobecker <brobecker@adacore.com>
1791 * python/py-type.c (convert_field): Add missing empty line
1794 2014-01-14 Doug Evans <dje@google.com>
1796 * symfile.h (expand_symtabs_matching): Renamed from
1797 expand_partial_symbol_names. Update prototype.
1798 (map_symbol_filenames): Renamed from map_partial_symbol_filenames.
1799 * symfile.c (expand_symtabs_matching): Renamed from
1800 expand_partial_symbol_names. New args file_matcher, kind.
1801 Rename arg fun to symbol_matcher.
1802 (map_symbol_filenames): Renamed from map_partial_symbol_filenames.
1803 * ada-lang.c (ada_complete_symbol_matcher): Renamed from
1804 ada_expand_partial_symbol_name.
1805 (ada_make_symbol_completion_list): Update to call
1806 expand_symtabs_matching.
1807 (ada_add_global_exceptions): Call expand_symtabs_matching.
1808 * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_files): Update to
1809 call map_symbol_filenames.
1810 * symtab.c (sources_info): Update to call map_symbol_filenames.
1811 (search_symbols): Call expand_symtabs_matching.
1812 (symbol_completion_matcher): Renamed from expand_partial_symbol_name.
1813 (default_make_symbol_completion_list_break_on): Update to call
1814 expand_symtabs_matching.
1815 (make_source_files_completion_list): Update to call
1816 map_symbol_filenames.
1818 2014-01-14 Doug Evans <dje@google.com>
1820 * symfile.h (expand_symtabs_file_matcher_ftype): New typedef.
1821 (expand_symtabs_symbol_matcher_ftype): New typedef.
1822 (quick_symbol_functions.expand_symtabs_matching): Update to use.
1823 expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
1824 * symfile.c (expand_partial_symbol_names): Update to use
1825 expand_symtabs_symbol_matcher_ftype.
1826 * dwarf2read.c (dw2_expand_symtabs_matching): Update to use
1827 expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
1828 Arg name_matcher renamed to symbol_matcher.
1829 * psymtab.c (recursively_search_psymtabs): Update to use
1830 expand_symtabs_symbol_matcher_ftype. Arg name_matcher renamed to
1832 (expand_symtabs_matching_via_partial): Update to use
1833 expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
1834 Arg name_matcher renamed to symbol_matcher.
1836 2014-01-14 Doug Evans <dje@google.com>
1838 * psymtab.c (expand_partial_symbol_names): Delete, moved to symfile.c.
1839 (map_partial_symbol_filenames): Ditto.
1840 * psymtab.h (expand_partial_symbol_names): Delete, moved to symfile.h.
1841 (map_partial_symbol_filenames): Ditto.
1842 * symfile.c (expand_partial_symbol_names): Moved here from psymtab.c.
1843 (map_partial_symbol_filenames): Ditto.
1844 * symfile.h (expand_partial_symbol_names): Moved here from psymtab.h.
1845 (map_partial_symbol_filenames): Ditto.
1846 * symtab.c: Delete #include "psymtab.h".
1848 2014-01-14 Pedro Alves <palves@redhat.com>
1849 Tom Tromey <tromey@redhat.com>
1851 * infrun.c (use_displaced_stepping): Use find_record_target
1852 instead of RECORD_IS_USED.
1853 (adjust_pc_after_break): Use record_full_is_used instead of
1855 * record-btrace.c (record_btrace_open): Call record_preopen
1856 instead of checking RECORD_IS_USED.
1857 * record-full.c (record_full_shortname)
1858 (record_full_core_shortname): New globals.
1859 (record_full_is_used): New function.
1860 (find_full_open): Call record_preopen instead of checking
1862 (init_record_full_ops): Set the target's shortname to
1863 record_full_shortname.
1864 (init_record_full_core_ops): Set the target's shortname to
1865 record_full_core_shortname.
1866 * record-full.h (record_full_is_used): Declare.
1867 * record.c (find_record_target): Make extern.
1868 (record_preopen): New function.
1869 * record.h (RECORD_IS_USED): Delete macro.
1870 (find_record_target, record_preopen): Declare functions.
1872 2014-01-14 Yao Qi <yao@codesourcery.com>
1874 * gdbarch.sh (core_xfer_shared_libraries): Change its argument
1875 'len''s type to ULONGEST.
1876 (core_xfer_shared_libraries_aix): Likewise.
1877 * gdbarch.c, gdbarch.h: Regenerated.
1878 * i386-cygwin-tdep.c (windows_core_xfer_shared_libraries):
1879 Change type of 'len' to ULONGEST.
1880 * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise.
1881 (rs6000_aix_core_xfer_shared_libraries_aix): Likewise.
1883 2014-01-14 Yao Qi <yao@codesourcery.com>
1885 * common/linux-osdata.c (linux_xfer_osdata_processes): Change
1886 type of 'len' to ULONGEST.
1887 (linux_xfer_osdata_processgroups): Likewise.
1888 (linux_xfer_osdata_threads): Likewise.
1889 (linux_xfer_osdata_fds): Likewise.
1890 (linux_xfer_osdata_isockets): Likewise.
1891 (linux_xfer_osdata_shm): Likewise.
1892 (linux_xfer_osdata_sem): Likewise.
1893 (linux_xfer_osdata_msg): Likewise.
1894 (linux_common_xfer_osdata): Likewise.
1895 (struct osdata_type) <getter>: Likewise.
1896 * common/linux-osdata.h (linux_common_xfer_osdata): Update
1899 2014-01-14 Yao Qi <yao@codesourcery.com>
1901 * target.h (target_xfer_partial_ftype): Update.
1902 (struct target_ops) <to_xfer_partial>: Change 'len' type to
1904 * aix-thread.c (aix_thread_xfer_partial): Change type of
1905 argument 'len' to ULONGEST.
1906 * auxv.c (procfs_xfer_auxv): Likewise.
1907 (ld_so_xfer_auxv): Likewise.
1908 (memory_xfer_auxv): Likewise.
1909 * bfd-target.c (target_bfd_xfer_partial): Likewise.
1910 * bsd-kvm.c (bsd_kvm_xfer_partial): Likewise.
1911 * bsd-uthread.c (bsd_uthread_xfer_partial): Likewise.
1912 * corelow.c (core_xfer_partial): Likewise.
1913 * ctf.c (ctf_xfer_partial): Likewise.
1914 * darwin-nat.c (darwin_read_write_inferior): Likewise. Use
1916 (darwin_read_dyld_info): Likewise.
1917 (darwin_xfer_partial): Likewise.
1918 * exec.c (section_table_xfer_memory_partial): Likewise.
1919 (exec_xfer_partial): Likewise.
1920 * exec.h (section_table_xfer_memory_partial): Update
1922 * gnu-nat.c (gnu_xfer_memory): Likewise. Call pulongest
1923 instead of plongest.
1924 (gnu_xfer_partial): Likewise.
1925 * ia64-hpux-nat.c (ia64_hpux_xfer_memory): Likewise.
1926 (ia64_hpux_xfer_solib_got): Likewise.
1927 (ia64_hpux_xfer_partial): Likewise.
1928 * ia64-linux-nat.c (ia64_linux_xfer_partial):
1929 * inf-ptrace.c (inf_ptrace_xfer_partial):
1930 * inf-ttrace.c (inf_ttrace_xfer_partial):
1931 * linux-nat.c (linux_xfer_siginfo): Likewise.
1932 (linux_nat_xfer_partial): Likewise.
1933 (spu_enumerate_spu_ids, linux_proc_xfer_spu): Likewise.
1934 (linux_nat_xfer_osdata, linux_xfer_partial): Likewise.
1935 * monitor.c (monitor_xfer_memory): Likewise.
1936 (monitor_xfer_partial): Likewise.
1937 * procfs.c (procfs_xfer_partial): Likewise.
1938 * record-full.c (record_full_xfer_partial): Likewise.
1939 (record_full_core_xfer_partial): Likewise.
1940 * remote-sim.c (gdbsim_xfer_memory): Likewise. Call pulongest
1941 instead of plongest.
1942 (gdbsim_xfer_partial): Likewise.
1943 * remote.c (remote_xfer_partial): Likewise.
1944 * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise.
1945 * rs6000-aix-tdep.h (rs6000_aix_ld_info_to_xml): Update
1947 * rs6000-nat.c (rs6000_xfer_partial): Likewise.
1948 (rs6000_xfer_shared_libraries): Likewise.
1949 * sol-thread.c (sol_thread_xfer_partial): Likewise.
1950 * sparc-nat.c (sparc_xfer_wcookie): Likewise.
1951 (sparc_xfer_partial): Likewise.
1952 * spu-linux-nat.c (spu_proc_xfer_spu): Likewise.
1953 (spu_xfer_partial): Likewise.
1954 * spu-multiarch.c (spu_xfer_partial): Likewise.
1955 * target.c (target_read_live_memory): Likewise.
1956 (memory_xfer_live_readonly_partial): Likewise.
1957 (memory_xfer_partial, memory_xfer_partial_1): Likewise.
1958 (target_xfer_partial, default_xfer_partial): Likewise.
1959 (current_xfer_partial): Likewise.
1960 * tracepoint.c (tfile_xfer_partial): Likewise.
1961 * windows-nat.c (windows_xfer_memory): Likewise. Call
1962 pulongest instead of plongest.
1963 (windows_xfer_partial): Likewise.
1964 (windows_xfer_shared_libraries): Likewise.
1966 2014-01-14 Yao Qi <yao@codesourcery.com>
1968 * rs6000-nat.c (rs6000_xfer_shared_libraries): Use
1969 target_xfer_partial_ftype.
1971 2014-01-13 Siva Chandra Reddy <sivachandra@google.com>
1975 * valops.c (value_struct_elt_bitpos): New function
1976 * py-type.c (convert_field): Set 'name' attribute of a gdb.Field
1977 object to 'None' if the field name is an empty string ("").
1978 * python/py-value.c (valpy_getitem): Use 'bitpos' and 'type'
1979 attribute to look for a field when 'name' is 'None'.
1980 (get_field_type): New function
1982 2014-01-13 Doug Evans <dje@google.com>
1985 * dwarf2read.c (dwarf2_get_dwz_file): Call gdb_bfd_record_inclusion.
1986 (try_open_dwop_file): Ditto.
1987 * gdb_bfd.c: #include "vec.h".
1988 (bfdp): New typedef.
1989 (struct gdb_bfd_data): New member included_bfds.
1990 (gdb_bfd_unref): Unref all included bfds.
1991 (gdb_bfd_record_inclusion): New function.
1992 * gdb_bfd.h (gdb_bfd_record_inclusion): Declare.
1994 2014-01-13 Tom Tromey <tromey@redhat.com>
1996 * gdbcore.h (deprecated_core_resize_section_table): Remove.
1998 2014-01-13 Tom Tromey <tromey@redhat.com>
2000 * defs.h (use_windows): Remove.
2001 * gdb.c (main): Update.
2002 * main.c (captured_main, gdb_main): Update.
2003 * main.h (struct captured_main_args) <use_windows>: Remove.
2004 * top.c (use_windows): Remove.
2006 2014-01-13 Tom Tromey <tromey@redhat.com>
2008 * defs.h (deprecated_flush_hook): Remove.
2010 2014-01-13 Jan Kratochvil <jan.kratochvil@redhat.com>
2013 * linux-thread-db.c (try_thread_db_load): Add parameter
2014 check_auto_load_safe. Move here the file_is_auto_load_safe call.
2015 (try_thread_db_load_from_pdir_1): Move it there from here.
2016 (try_thread_db_load_from_sdir): Update caller.
2017 (try_thread_db_load_from_dir): Move it there from here.
2019 2014-01-13 Patrick Palka <patrick@parcs.ath.cx>
2021 * regformats/regdat.sh: Always rewrite the register file.
2023 2014-01-13 Pedro Alves <palves@redhat.com>
2025 * Makefile.in (CHECK_HEADERS): New variable.
2026 (check-headers:): New rule.
2028 2014-01-13 Tom Tromey <tromey@redhat.com>
2030 * cli/cli-setshow.c (do_set_command): Update.
2031 * defs.h (deprecated_set_hook): Remove.
2032 * top.c (deprecated_set_hook): Remove.
2034 2014-01-13 Pedro Alves <palves@redhat.com>
2036 * tracepoint.c (tfile_fetch_registers): Don't infer the PC from
2037 the tracepoint if the PC is a pseudo-register.
2039 2014-01-13 Tom Tromey <tromey@redhat.com>
2041 * defs.h (XCALLOC): Remove.
2042 * bcache.c (bcache_xmalloc): Use XCNEW, not XCALLOC.
2043 (print_bcache_statistics): Use XCNEWVEC, not XCALLOC.
2044 * dwarf2loc.c (allocate_piece_closure): Likewise.
2045 * elfread.c (elf_symfile_segments): Likewise.
2046 (elf_symfile_segments): Likewise.
2047 * gdbtypes.c (copy_type_recursive): Likewise.
2048 * i386-tdep.c (i386_gdbarch_init): Use XCNEW, not XCALLOC.
2049 * jit.c (jit_frame_sniffer): Use XCNEWVEC, not XCALLOC.
2050 * minsyms.c (prim_record_minimal_symbol_full): Use XCNEW, not
2052 * mt-tdep.c (mt_gdbarch_init): Likewise.
2053 * opencl-lang.c (allocate_lval_closure): Use XCNEWVEC, not
2055 * psymtab.c (psymbol_compare): Use XCNEW, not XCALLOC.
2056 * regcache.c (regcache_xmalloc_1): Use XCNEWVEC, not XCALLOC.
2057 * registry.c (registry_alloc_data): Likewise.
2058 * rs6000-tdep.c (rs6000_gdbarch_init): Use XCNEW, not XCALLOC.
2059 * s390-linux-tdep.c (s390_gdbarch_init): Likewise.
2060 * serial.c (serial_fdopen_ops): Likewise.
2061 * solib-aix.c (solib_aix_get_section_offsets): Use XCNEWVEC, not
2063 * spu-tdep.c (spu_gdbarch_init): Use XCNEW, not XCALLOC.
2064 * symfile.c (default_symfile_segments): Use XCNEW and XCNEWVEC,
2067 2014-01-13 Tom Tromey <tromey@redhat.com>
2069 * defs.h (XMALLOC): Remove.
2070 * avr-tdep.c (avr_gdbarch_init): Use XNEW, not XMALLOC.
2071 * bfin-tdep.c (bfin_gdbarch_init): Likewise.
2072 * cli-out.c (struct ui_out *): Likewise.
2073 * cli/cli-dump.c (add_dump_command): Likewise.
2074 (add_dump_command): Likewise.
2075 * complaints.c (get_complaints): Likewise.
2076 (find_complaint): Likewise.
2077 * dwarf2-frame.c (execute_cfa_program): Likewise.
2078 * dwarf2read.c (abbrev_table_read_table): Likewise.
2079 * gdbarch.sh: Likewise.
2080 * gdbarch.c: Rebuild.
2081 * inf-ttrace.c (inf_ttrace_add_page): Likewise.
2082 * interps.c (interp_new): Likewise.
2083 * lm32-tdep.c (lm32_gdbarch_init): Likewise.
2084 * m32r-tdep.c (m32r_gdbarch_init): Likewise.
2085 * mi/mi-console.c (mi_console_file_new): Likewise.
2086 * mi/mi-interp.c (mi_interpreter_init): Likewise.
2087 * mi/mi-out.c (mi_out_new): Likewise.
2088 * mi/mi-parse.c (mi_parse): Likewise.
2089 * microblaze-tdep.c (microblaze_gdbarch_init): Likewise.
2090 * moxie-tdep.c (moxie_gdbarch_init): Likewise.
2091 * observer.c (xalloc_observer_list_node): Likewise.
2092 * regcache.c (regcache_xmalloc_1): Likewise.
2093 * reggroups.c (reggroup_new): Likewise.
2094 (_initialize_reggroup): Likewise.
2095 * registry.c (register_data_with_cleanup): Likewise.
2096 * remote.c (remote_notif_stop_alloc_reply): Likewise.
2097 * ser-base.c (serial_ttystate): Likewise.
2098 * ser-mingw.c (make_pipe_state): Likewise.
2099 * ser-pipe.c (pipe_open): Likewise.
2100 * serial.c (serial_open): Likewise.
2101 * sh64-tdep.c (sh64_gdbarch_init): Likewise.
2102 * tui/tui-data.c (tui_alloc_generic_win_info): Likewise.
2103 (tui_alloc_win_info): Likewise.
2104 (tui_add_content_elements): Likewise.
2105 * tui/tui-file.c (tui_file_new): Likewise.
2106 * tui/tui-out.c (tui_out_new): Likewise.
2107 * ui-file.c (mem_file_new): Likewise.
2108 * ui-out.c (push_level): Likewise.
2109 (make_cleanup_ui_out_end): Likewise.
2110 (append_header_to_list): Likewise.
2111 (ui_out_new): Likewise.
2112 * user-regs.c (user_reg_add_builtin): Likewise.
2114 2014-01-13 Tom Tromey <tromey@redhat.com>
2116 * defs.h (XZALLOC): Remove.
2117 * ada-lang.c (get_ada_inferior_data): Use XCNEW, not XZALLOC.
2118 * ada-tasks.c (get_ada_tasks_pspace_data): Likewise.
2119 (get_ada_tasks_inferior_data): Likewise.
2120 * auto-load.c (get_auto_load_pspace_data): Likewise.
2121 * auxv.c (get_auxv_inferior_data): Likewise.
2122 * bfd-target.c (target_bfd_reopen): Likewise.
2123 * breakpoint.c (get_catch_syscall_inferior_data): Likewise.
2124 (deprecated_insert_raw_breakpoint): Likewise.
2125 * bsd-uthread.c (bsd_uthread_pid_to_str): Likewise.
2126 * corelow.c (core_open): Likewise.
2127 * darwin-nat.c (darwin_check_new_threads): Likewise.
2128 (darwin_attach_pid): Likewise.
2129 * dummy-frame.c (dummy_frame_push): Likewise.
2130 * dwarf2-frame.c (dwarf2_frame_cache): Likewise.
2131 * dwarf2loc.c (allocate_piece_closure): Likewise.
2132 * elfread.c (elf_symfile_segments): Likewise.
2133 * eval.c (ptrmath_type_p): Likewise.
2134 * exceptions.c (EXCEPTIONS_SIGJMP_BUF): Likewise.
2135 * gdbtypes.c (alloc_type_arch): Likewise.
2136 (alloc_type_instance): Likewise.
2137 * hppa-tdep.c (hppa_gdbarch_init): Likewise.
2138 * inf-child.c (inf_child_can_use_agent): Likewise.
2139 * inflow.c (get_inflow_inferior_data): Likewise.
2140 * infrun.c (save_infcall_suspend_state): Likewise.
2141 * jit.c (jit_reader_load): Likewise.
2142 (get_jit_objfile_data): Likewise.
2143 (get_jit_program_space_data): Likewise.
2144 (jit_object_open_impl): Likewise.
2145 (jit_symtab_open_impl): Likewise.
2146 (jit_block_open_impl): Likewise.
2147 (jit_frame_sniffer): Likewise.
2148 * linux-fork.c (add_fork): Likewise.
2149 * maint.c (make_command_stats_cleanup): Likewise.
2150 * objfiles.c (get_objfile_pspace_data): Likewise.
2151 * opencl-lang.c (struct lval_closure): Likewise.
2152 * osdata.c (osdata_start_osdata): Likewise.
2153 * progspace.c (new_address_space): Likewise.
2154 (add_program_space): Likewise.
2155 * remote-sim.c (get_sim_inferior_data): Likewise.
2156 * sh-tdep.c (sh_gdbarch_init): Likewise.
2157 * skip.c (Ignore): Likewise.
2158 (skip_delete_command): Likewise.
2159 * solib-aix.c (get_solib_aix_inferior_data): Likewise.
2160 (library_list_start_library): Likewise.
2161 (solib_aix_current_sos): Likewise.
2162 * solib-darwin.c (get_darwin_info): Likewise.
2163 (darwin_current_sos): Likewise.
2164 * solib-dsbt.c (get_dsbt_info): Likewise.
2165 * solib-ia64-hpux.c (new_so_list): Likewise.
2166 (ia64_hpux_get_solib_linkage_addr): Likewise.
2167 * solib-spu.c (append_ocl_sos): Likewise.
2168 (spu_current_sos): Likewise.
2169 * solib-svr4.c (get_svr4_info): Likewise.
2170 (svr4_keep_data_in_core): Likewise.
2171 (library_list_start_library): Likewise.
2172 (svr4_default_sos): Likewise.
2173 (svr4_read_so_list): Likewise.
2174 * solib-target.c (library_list_start_library): Likewise.
2175 (solib_target_current_sos): Likewise.
2176 * sparc-tdep.c (sparc32_gdbarch_init): Likewise.
2177 * symfile-debug.c (install_symfile_debug_logging): Likewise.
2178 * symfile.c (default_symfile_segments): Likewise.
2179 * target-descriptions.c (tdesc_data_init): Likewise.
2180 (tdesc_create_reg): Likewise.
2181 (struct tdesc_type *): Likewise.
2182 (tdesc_create_vector): Likewise.
2183 (tdesc_set_struct_size): Likewise.
2184 (struct tdesc_type *): Likewise.
2185 (tdesc_free_feature): Likewise.
2186 (tdesc_create_feature): Likewise.
2187 * windows-nat.c (windows_add_thread): Likewise.
2188 (windows_make_so): Likewise.
2189 * xml-support.c (gdb_xml_body_text): Likewise.
2190 (gdb_xml_create_parser_and_cleanup): Likewise.
2191 (xml_process_xincludes): Likewise.
2192 * xml-syscall.c (allocate_syscalls_info): Likewise.
2193 (syscall_create_syscall_desc): Likewise.
2195 2014-01-12 Sergio Durigan Junior <sergiodj@redhat.com>
2197 * i386-tdep.c (i386_stap_parse_special_token_triplet): New
2198 function, with code from i386_stap_parse_special_token.
2199 (i386_stap_parse_special_token_three_arg_disp): Likewise.
2200 (i386_stap_parse_special_token): Move code to the two functions
2203 2014-01-09 Pedro Alves <palves@redhat.com>
2204 Hui Zhu <hui@codesourcery.com>
2207 * breakpoint.c (insert_bp_location): Rename hw_bp_err_string to
2208 bp_err_string. Don't mark the location shlib_disabled if the
2209 error thrown wasn't a generic or memory error. Catch errors
2210 thrown while inserting breakpoints in overlayed code. Output
2211 error message of software breakpoints.
2212 * remote.c (remote_insert_breakpoint): If this breakpoint has
2213 target-side commands but this stub doesn't support Z0 packets,
2214 throw NOT_SUPPORTED_ERROR error.
2215 * exceptions.h (enum errors) <NOT_SUPPORTED_ERROR>: New error.
2216 * target.h (target_insert_breakpoint): Extend comment.
2217 (target_insert_hw_breakpoint): Add comment.
2219 2014-01-08 Pedro Alves <palves@redhat.com>
2221 * remote.c (remote_add_thread): Add threads silently if starting
2223 (remote_notice_new_inferior): If in all-stop, and starting up,
2224 don't call notice_new_inferior.
2225 (get_current_thread): New function, factored out from ...
2226 (add_current_inferior_and_thread): ... this. Adjust.
2227 (remote_start_remote) <all-stop>: Fetch the thread list. If we
2228 found any thread, then select the remote's current thread as GDB's
2231 2014-01-08 Joel Brobecker <brobecker@adacore.com>
2233 * NEWS: Create a new section for the next release branch.
2234 Rename the section of the current branch, now that it has
2237 2014-01-08 Joel Brobecker <brobecker@adacore.com>
2239 GDB 7.7 branch created (79301218fa0f074c5656db0ec8972a5ddcf91fb5):
2240 * version.in: Bump version to 7.7.50.DATE-cvs.
2242 2014-01-08 Yao Qi <yao@codesourcery.com>
2244 * spu-linux-nat.c (spu_symbol_file_add_from_memory): Change
2245 type of 'id' to gdb_byte. Cast 'id' to 'const char *'.
2246 (spu_xfer_partial): Cast 'buf' to 'const char *'.
2248 2014-01-08 Yao Qi <yao@codesourcery.com>
2250 * spu-linux-nat.c (spu_symbol_file_add_from_memory): Pass
2251 return value of bfd_get_filename to symbol_file_add_from_bfd.
2253 2014-01-08 Pierre Muller <muller@sourceware.org>
2256 * coff-pe-read.c (struct read_pe_section_data): Add index field.
2257 (add_pe_exported_sym): Use SECTION_DATA->INDEX for call
2258 to prim_record_mininal_symbol_and_info.
2259 (add_pe_forwarded_sym): Use known section number of forwarded symbol
2260 in call to prim_record_minimal_symbol_and_info.
2261 (read_pe_exported_syms): Set index field of section_data.
2263 2014-01-07 Andrew Pinski <apinski@cavium.com>
2265 * features/aarch64-core.xml (cpsr): Change to be 64bit.
2266 * features/aarch64.c: Regenerate.
2268 2014-01-07 Andreas Schwab <schwab@linux-m68k.org>
2270 * target.c (return_null): Define.
2271 (update_current_target): Use it instead of return_zero for
2272 functions that return a pointer.
2274 2014-01-07 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
2276 * source.c (add_path): Fix check for duplicated paths in the previously
2279 2014-01-07 Honggyu Kim <hong.gyu.kim@lge.com>
2281 * ada-lang.c: Remove duplicated include statements.
2282 * alphabsd-nat.c: Ditto.
2283 * amd64-darwin-tdep.c: Ditto.
2284 * amd64fbsd-nat.c: Ditto.
2285 * auto-load.c: Ditto.
2287 * breakpoint.c: Ditto.
2289 * fork-child.c: Ditto.
2290 * gdb_usleep.c: Ditto.
2291 * i386-darwin-tdep.c: Ditto.
2292 * i386fbsd-nat.c: Ditto.
2294 * inferior.c: Ditto.
2296 * linux-nat.c: Ditto.
2297 * linux-tdep.c: Ditto.
2298 * m68kbsd-nat.c: Ditto.
2299 * m68klinux-nat.c: Ditto.
2300 * microblaze-tdep.c: Ditto.
2301 * mips-linux-tdep.c: Ditto.
2302 * mn10300-tdep.c: Ditto.
2303 * nto-tdep.c: Ditto.
2304 * opencl-lang.c: Ditto.
2306 * printcmd.c: Ditto.
2307 * regcache.c: Ditto.
2308 * remote-m32r-sdi.c: Ditto.
2312 * tilegx-linux-nat.c: Ditto.
2313 * tilegx-tdep.c: Ditto.
2314 * tracepoint.c: Ditto.
2316 * vaxbsd-nat.c: Ditto.
2317 * windows-nat.c: Ditto.
2318 * xtensa-tdep.c: Ditto.
2320 2014-01-07 Yao Qi <yao@codesourcery.com>
2322 * spu-linux-nat.c (_initialize_spu_nat): Declare.
2324 2014-01-07 Yao Qi <yao@codesourcery.com>
2325 Joel Brobecker <brobecker@adacore.com>
2327 * aix-thread.c (pdc_read_regs): Cast parameter to uintptr_t.
2328 (pdc_write_regs): Likewise.
2329 (fetch_regs_kernel_thread): Likewise.
2330 (store_regs_kernel_thread): Likewise.
2332 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2334 * ada-varobj.c (ada_varobj_adjust_for_child_access): Convert
2335 tagged type objects to their actual type.
2337 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2339 * ada-valprint.c (print_field_values): Add "language" parameter.
2340 Update calls to print_field_values and print_variant_part.
2341 Pass new parameter "language" in call to val_print instead
2342 of "current_language". Replace call to ada_val_print by call
2344 (print_variant_part): Add "language" parameter.
2345 (ada_val_print_struct_union): Update call to print_field_values.
2347 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2349 * ada-valprint.c (ui_memcpy): Delete.
2350 (ada_print_floating): Update documentation. Add empty line
2351 between between function documentation and implementation.
2352 Delete variable "buffer". Use ui_file_xstrdup in place of
2353 ui_file_put. Minor adjustments following this change.
2355 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2357 * ada-valprint.c (ada_val_print_string): New function,
2358 extracted from ada_val_print_array.
2359 (ada_val_print_array): Replace extracted code by call
2360 to ada_val_print_string followed by a return. Move
2361 "else" branch to the function's top block.
2363 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2365 * ada-valprint.c (ada_val_print_array): Move implementation
2366 down. Rename parameter "offset" and "val" into "offset_aligned"
2367 and "original_value" respectively. Add parameter "offset".
2369 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2371 * ada-valprint.c (ada_val_print_ref): Rewrite by mostly
2372 re-organizing the code. Change the "???" message printed
2373 when target type is a TYPE_CODE_UNDEF into
2374 "<ref to undefined type>".
2376 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2378 * ada-valprint.c (print_record): Delete, implementation inlined...
2379 (ada_val_print_struct_union): ... here. Remove call to
2380 ada_check_typedef in inlined implementation.
2382 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2384 * ada-valprint.c (ada_val_print_gnat_array): New function,
2385 extracted from ada_val_print_1;
2386 (ada_val_print_ptr, ada_val_print_num, ada_val_print_enum)
2387 (ada_val_print_flt, ada_val_print_struct_union)
2388 (ada_val_print_ref): Likewise.
2389 (ada_val_print_1): Delete variables i and elttype.
2390 Replace extracted-out code by call to corresponding
2393 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2395 * ada-valprint.c (ada_val_print_1): Remove call to gdb_flush.
2397 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2399 * ada-valprint.c (ada_val_print_1): Replace calls to
2400 ada_val_print_1 by calls to val_print.
2402 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2404 * ada-valprint.c (ada_val_print_1): Add parameter "language".
2405 Update calls to self accordingly. Replace calls to c_val_print
2406 by calls to val_print.
2408 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2410 * ada-valprint.c (print_record): Delete declaration.
2411 (adjust_type_signedness, ada_val_print_1): Likewise.
2412 (ada_val_print): Move function implementation down.
2413 (print_variant_part, print_field_values, print_record):
2414 Move function implementation up.
2416 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2418 * python/py-type.c (typy_get_name): New function.
2419 (type_object_getset): Add entry for attribute "name".
2420 * NEWS: Add entry mentioning this new attribute.
2422 2014-01-07 Yao Qi <yao@codesourcery.com>
2424 * gnu-nat.c (set_exceptions_cmd): Remove an empty body 'if'
2427 2014-01-07 Yao Qi <yao@codesourcery.com>
2429 * gnu-nat.c (info_port_rights): Add qualifier const to
2432 2014-01-07 Yao Qi <yao@codesourcery.com>
2434 * gnu-nat.c (trace_me): Use 'void' for empty argument list.
2436 2014-01-07 Yao Qi <yao@codesourcery.com>
2438 * gnu-nat.c (make_inf) Update declaration.
2439 (make_inf): Make it static.
2440 (inf_set_traced): Likewise.
2441 (inf_port_to_thread, inf_task_died_status): Likewise.
2443 2014-01-07 Yao Qi <yao@codesourcery.com>
2445 * gnu-nat.c (inf_tid_to_proc): Remove declaration.
2447 2014-01-07 Yao Qi <yao@codesourcery.com>
2449 * gnu-nat.c (_initialize_gnu_nat): Declare.
2451 2014-01-07 Yao Qi <yao@codesourcery.com>
2453 * gdbarch.sh (byte_order, byte_order_for_code): Change type to
2455 (struct gdbarch_info) <byte_order>: Change type to
2457 <byte_order_for_code>: Likewise.
2458 * gdbarch.c, gdbarch.h: Regenerated.
2460 2014-01-06 Sasha Smundak <asmundak@google.com>
2462 * jit.c: (jit_reader_load_command): Fix JIT reader path creation.
2464 2014-01-06 Tom Tromey <tromey@redhat.com>
2466 * doublest.c (convert_doublest_to_floatformat): Use const, not
2468 * somread.c (som_symtab_read): Likewise.
2470 2014-01-07 Hui Zhu <hui@codesourcery.com>
2472 * gdb_bfd.c (gdb_bfd_stash_filename): Removed.
2473 (gdb_bfd_open): Removed gdb_bfd_stash_filename.
2474 (gdb_bfd_fopen): Ditto.
2475 (gdb_bfd_openr): Ditto.
2476 (gdb_bfd_openw): Ditto.
2477 (gdb_bfd_openr_iovec): Ditto.
2478 (gdb_bfd_fdopenr): Ditto.
2479 * gdb_bfd.h (gdb_bfd_stash_filename): Removed.
2480 * solib-aix.c (solib_aix_bfd_open): Alloc object_bfd->filename
2482 * solib-darwin.c (darwin_bfd_open): Alloc res->filename
2484 * symfile-mem.c (symbol_file_add_from_memory): Removed
2485 gdb_bfd_stash_filename.
2487 2014-01-03 Doug Evans <dje@google.com>
2489 * nat/linux-waitpid.c (linux_debug): Remove extraneous \n from
2492 2014-01-01 Joel Brobecker <brobecker@adacore.com>
2494 Update year range in copyright notice of all files.
2496 2014-01-01 Joel Brobecker <brobecker@adacore.com>
2498 * top.c (print_gdb_version): Set copyright year to 2014.
2500 2014-01-01 Joel Brobecker <brobecker@adacore.com>
2502 * config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2013.
2504 For older changes see ChangeLog-2013.
2510 version-control: never