1 2011-06-06 Pedro Alves <pedro@codesourcery.com>
3 * infcall.c (run_inferior_call): Don't mask async. Instead force
4 a synchronous wait, if the target can async.
6 * target.h (struct target_ops): Delete to_async_mask.
7 (target_async_mask): Delete.
8 * target.c (update_current_target): Delete references to to_async_mask.
9 * linux-nat.c (linux_nat_async_mask_value): Delete.
10 (linux_nat_is_async_p, linux_nat_can_async_p): Remove references
11 to linux_nat_async_mask_value.
12 (linux_nat_async_mask): Delete.
13 (linux_nat_async, linux_nat_close): Remove references to
14 linux_nat_async_mask_value.
15 * record.c (record_async_mask_value): Delete.
16 (record_async): Remove references to record_async_mask_value.
17 (record_async_mask): Delete.
18 (record_can_async_p, record_is_async_p): Remove references to
19 record_async_mask_value.
20 (init_record_ops, init_record_core_ops): Remove references to
22 * remote.c (remote_async_mask_value): Delete.
23 (init_remote_ops): Remove reference to remote_async_mask.
24 (remote_can_async_p, remote_is_async_p): Remove references to
25 remote_async_mask_value.
26 (remote_async): Remove references to remote_async_mask_value.
27 (remote_async_mask): Delete.
29 * infrun.c (fetch_inferior_event): Don't claim registers changed
30 if the current thread is already not executing.
32 2011-06-03 Joel Brobecker <brobecker@adacore.com> (obvious fix)
34 From Stephen Kitt <steve@sk2.org>
35 * breakpoint.c, breakpoint.h, cli/cli-dump.c, dwarf2expr.c,
36 gdbarch.c, gdbarch.sh, remote.c: Various spelling fixes.
38 2011-06-03 Joel Brobecker <brobecker@adacore.com>
40 * dwarf2expr.c (execute_stack_op) [DW_OP_deref]: Handle
41 the case where ADDR_SIZE is different from TYPE_LENGTH (type).
43 2011-06-03 Tom Tromey <tromey@redhat.com>
45 * python/py-inferior.c (python_inferior_exit): Use inferior's exit
47 * python/py-exitedevent.c (create_exited_event_object): Change
48 type of 'exit_code'. Optionally add exit_code attribute.
49 (emit_exited_event): Change type of 'exit_code'.
50 * python/py-event.h (emit_exited_event): Update.
51 * mi/mi-interp.c (mi_inferior_exit): Print exit code.
52 * infrun.c (handle_inferior_event): Set exit code fields on
54 * inferior.h (struct inferior) <has_exit_code, exit_code>: New
56 * inferior.c (exit_inferior_1): Initialize new fields.
58 2011-06-03 Tom Tromey <tromey@redhat.com>
60 * dwarf2expr.c (get_signed_type): New function.
61 (execute_stack_op) <DW_OP_shra>: Always perform a signed shift.
63 2011-06-02 Keith Seitz <keiths@redhat.com>
65 * objc-lang.c (find_methods): Increment objfile_csym earlier.
67 2011-06-02 Pedro Alves <pedro@codesourcery.com>
69 * top.h (simplified_command_loop): Delete declaration.
71 2011-06-01 Mike Frysinger <vapier@gentoo.org>
73 * remote-sim.c (gdbsim_open): Add the strlen of " --sysroot=" and
74 gdb_sysroot to the "len" variable. Append both to "arg_buf".
76 2011-06-01 Yao Qi <yao@codesourcery.com>
78 * objfiles.h (obj_section_addr): Update reference to objfile from
80 (obj_section_endaddr): Likewise.
82 2011-06-01 Daniel Jacobowitz <drow@false.org>
84 * MAINTAINERS: Update my email address and affiliation. Also
85 update Ian Lance Taylor's affiliation. Use UTF-8 for ludo@gnu.org.
87 2010-05-31 Keith Seitz <keiths@redhat.com>
90 * linespec.c (get_search_block): New function.
91 (find_methods): Add FILE_SYMTATB parameter and use it and
92 get_search_block to pass an appropriate block to
93 lookup_symbol_in_namespace.
94 (decode_line_1): Record if *ARGPTR is single-quote enclosed.
95 Check if *ARGPTR starts with a filename first.
96 If it does, call locate_first_half again to locate the next
97 "first half" of the linespec.
98 Pass FILE_SYMTATB to decode_objc and decode_compound.
99 Swallow the trailing single-quote if IS_SQUOTE_ENCLOSED.
100 (locate_first_half): Stop on the first colon seen.
101 (decode_compound): Add FILE_SYMTAB parameter.
102 Pass FILE_SYMTAB to lookup_prefix_sym and find_method.
103 (lookup_prefix_sym): Add FILE_SYMTAB parameter and use
104 get_search_block with lookup_symbol.
105 (find_method): Add FILE_SYMTAB parameter and pass it to
107 (decode_objc): Use get_search_block.
109 2010-05-31 Keith Seitz <keiths@redhat.com>
112 * cp-namespace.c (ANONYMOUS_NAMESPACE_LEN): Remove.
113 (cp_scan_for_anonymous_namespaces): Use CP_ANONYMOUS_NAMESPACE_STR
114 and CP_ANONYMOUS_NAMESPACE_LEN.
115 (cp_is_anonymous): Likewise.
116 * cp-support.h (CP_ANONYMOUS_NAMESPACE_STR): Define.
117 (CP_ANONYMOUS_NAMESPACE_LEN): Define.
118 * dwarf2read.c (namespace_name): Likewise.
119 (fixup_partial_die): Likewise.
120 * linespec.c (decode_compound): If CP_ANONYMOUS_NAMESPACE_STR is
121 seen in the input, keep it.
123 2011-05-30 Pedro Alves <pedro@codesourcery.com>
125 * target.h (enum inferior_event_type): Delete INF_QUIT_REQ.
126 * inf-loop.h (inferior_event_handler_wrapper): Delete.
127 * inf-loop.c (inferior_event_handler_wrapper): Delete.
128 (inferior_event_handler): Don't handle INF_QUIT_REQ.
129 * remote.c (_initialize_remote): Register
130 async_remote_interrupt_twice directly as
131 sigint_remote_twice_token event.
133 2011-05-30 Pedro Alves <pedro@codesourcery.com>
135 * target.h (enum inferior_event_type): Delete INF_ERROR.
136 * inf-loop.c (inferior_event_handler): Don't handle INF_ERROR.
138 2011-05-30 Pedro Alves <pedro@codesourcery.com>
140 * interps.c (interp_set): Don't cancel continuations.
142 2011-05-30 Jan Kratochvil <jan.kratochvil@redhat.com>
144 * linux-nat.c (linux_lwp_is_zombie): Use xsnprintf.
146 2011-05-30 Pedro Alves <pedro@codesourcery.com>
148 * continuations.h (continuation_ftype): Add `err' parameter.
150 (do_all_continuations, do_all_continuations_thread)
151 (do_all_intermediate_continuations)
152 (do_all_intermediate_continuations_thread)
153 (do_all_inferior_continuations): Add `err' parameter.
154 * continuations.c (do_my_continuations_1, do_my_continuations)
155 (do_all_inferior_continuations, do_all_continuations_ptid)
156 (do_all_continuations_thread_callback)
157 (do_all_continuations_thread, do_all_continuations)
158 (do_all_intermediate_continuations_thread_callback)
159 (do_all_intermediate_continuations_thread)
160 (do_all_intermediate_continuations): Add `err' parameter, and pass
161 it down all the way to the continuations proper.
162 * inf-loop.c (inferior_event_handler): If fetching an inferior
163 event throws an error, don't pop the target, and still call the
164 continuations, but with `err' set. Adjust all other continuation
166 * breakpoint.c (until_break_command_continuation): Add `err'
168 * infcmd.c (step_1_continuation): Add `err' parameter. Don't
169 issue another step if `err' is set.
170 (struct until_next_continuation_args): New.
171 (until_next_continuation): Add `err' parameter. Adjust.
172 (until_next_command): Adjust.
173 (struct finish_command_continuation_args): Add `thread' field.
174 (finish_command_continuation): Add `err' parameter. Handle it.
175 (finish_forward): Adjust.
176 (attach_command_continuation): Add `err' parameter. Handle it.
177 * infrun.c (infrun_thread_stop_requested_callback): Adjust to
178 cancel the continuations.
179 * interps.c (interp_set): Adjust to cancel the continuations.
180 * thread.c (clear_thread_inferior_resources): Adjust to cancel the
181 continuations rather than discarding.
182 (free_thread): Don't clear thread inferior resources here.
183 (delete_thread_1): Do it here instead. And do it before removing
184 the thread from the threads list. Tag the thread as exited before
185 clearing thread inferior resources.
187 2011-05-30 Joel Brobecker <brobecker@adacore.com>
189 * infcall.c (call_function_by_hand): Rephrase error message.
191 2011-05-27 Pedro Alves <pedro@codesourcery.com>
193 * defs.h (struct thread_info, struct inferior): Delete forward
195 * breakpoint.h (struct thread_info): New forward declaration.
196 * observer.sh (struct inferior): New forward declaration.
197 * python/python-internal.h (struct inferior): New forward
200 2011-05-27 Pedro Alves <pedro@codesourcery.com>
202 * defs.h (struct continuation, continuation_ftype)
203 (continuation_free_arg_ftype, add_continuation)
204 (do_all_continuations, do_all_continuations_thread)
205 (discard_all_continuations, discard_all_continuations_thread)
206 (add_intermediate_continuation, do_all_intermediate_continuations)
207 (do_all_intermediate_continuations_thread)
208 (discard_all_intermediate_continuations)
209 (discard_all_intermediate_continuations_thread)
210 (add_inferior_continuation, do_all_inferior_continuations)
211 (discard_all_inferior_continuations): Move to ...
212 * continuations.h: ... this new file.
213 * breakpoint.c, continuations.c, event-top.c, inf-loop.c,
214 infcmd.c, inferior.c, infrun.c, interps.c: Include
217 2011-05-27 Jan Kratochvil <jan.kratochvil@redhat.com>
218 Doug Evans <dje@google.com>
220 Fix PR 10970, PR 12702.
221 * linux-nat.c (linux_lwp_is_zombie): New function.
222 (wait_lwp): Initialize status. New variable prev_mask. Block signals.
223 Check for linux_lwp_is_zombie. Use WNOHANG and sigsuspend.
225 2011-05-27 Pedro Alves <pedro@codesourcery.com>
227 * defs.h (continuation_ftype, continuation_free_arg_ftype): New
229 (add_continuation, add_intermediate_continuation)
230 (add_inferior_continuation): Use them.
231 * continuations.c (struct continuation): Use them.
232 (make_continuation_ftype): Delete.
233 (make_continuation, add_inferior_continuation, add_continuation)
234 (add_intermediate_continuation): Use continuation_ftype and
235 continuation_free_arg_ftype. Rename parameters to shorter names.
237 2011-05-27 Pedro Alves <pedro@codesourcery.com>
239 * continuations.c (make_continuation): Make it return void.
240 (do_my_continuations): Rename to ...
241 (do_my_continuations_1): ... this. Remove old_chain parameter and
243 (do_my_continuations): New.
244 (discard_my_continuations): Rename to ...
245 (discard_my_continuations_1): ... this. Remove old_chain
246 parameter and adjust.
247 (discard_my_continuations): New.
248 (add_inferior_continuation): Simplify.
249 (do_all_inferior_continuations): Reimplement on top
251 (discard_all_inferior_continuations): Simplify.
252 (add_continuation): Simplify.
253 (do_all_continuations_ptid): Simplify.
254 (discard_all_continuations_thread_callback): Simplify.
255 (add_intermediate_continuation): Simplify.
256 (discard_all_intermediate_continuations_thread_callback):
259 2011-05-27 Pedro Alves <pedro@codesourcery.com>
261 * utils.c (struct continuation, add_continuation)
262 (add_inferior_continuation)
263 (do_all_inferior_continuations, discard_all_inferior_continuations)
264 (restore_thread_cleanup, do_all_continuations_ptid)
265 (do_all_continuations_thread_callback)
266 (do_all_continuations_thread, do_all_continuations)
267 (discard_all_continuations_thread_callback)
268 (discard_all_continuations_thread, discard_all_continuations)
269 (add_intermediate_continuation)
270 (do_all_intermediate_continuations_thread_callback)
271 (do_all_intermediate_continuations_thread)
272 (do_all_intermediate_continuations)
273 (discard_all_intermediate_continuations_thread_callback)
274 (discard_all_intermediate_continuations_thread)
275 (discard_all_intermediate_continuations): Move to ...
276 * continuations.c: ... this new file, and adjust to no longer
277 implement continuations on top of cleanups.
278 * Makefile.in (SFILES): Add continuations.c.
279 (COMMON_OBS): Add continuations.o.
281 2011-05-26 Pedro Alves <pedro@codesourcery.com>
283 * inferior.h (enum exec_direction_kind): Delete EXEC_ERROR.
284 * infrun.c (show_exec_direction_func): Don't handle EXEC_ERROR.
285 Internal error on invalid values.
286 * reverse.c: Don't handle EXEC_ERROR.
287 * mi/mi-main.c: Don't handle EXEC_ERROR.
289 2011-05-26 Pedro Alves <pedro@codesourcery.com>
291 * record.c: Include event-loop.h, inf-loop.h.
292 (record_beneath_to_async): New global.
293 (tmp_to_async): New global.
294 (record_async_inferior_event_token): New global.
295 (record_open_1): Don't error out if async is enabled.
296 (record_open): Handle to_async. Create an async event source in
298 (record_close): Delete the async event source.
299 (record_resumed): New global.
300 (record_execution_dir): New global.
301 (record_resume, record_core_resume): Set them. Register the
302 target on the event loop.
303 (record_wait): Rename to ...
304 (record_wait_1): ... this. Add more debug output. Handle
305 TARGET_WNOHANG, and the target beneath returning
306 TARGET_WAITKIND_IGNORE.
307 (record_wait): Reimplement on top of record_wait_1.
308 (record_async_mask_value): New global.
309 (record_async, record_async_mask, record_can_async_p)
310 (record_is_async_p, record_execution_direction): New functions.
311 (init_record_ops, init_record_core_ops): Install new methods.
312 * infrun.c (fetch_inferior_event): Temporarily switch the global
313 execution direction to the direction the target was going.
314 (execution_direction): Change type to int.
315 * target.c (default_execution_direction): New function.
316 (update_current_target): Inherit and de_fault
317 to_execution_direction.
318 * target.h (struct target_ops) <to_execution_direction>: New
320 (target_execution_direction): New macro.
321 * inferior.h (execution_direction): Change type to int.
323 2011-05-26 Pedro Alves <pedro@codesourcery.com>
325 * infcall.c (call_function_by_hand): Don't allow calling functions
326 in reverse execution mode.
328 2011-05-26 Pedro Alves <pedro@codesourcery.com>
330 * infcmd.c (finish_command): Allow async finish in reverse.
332 2011-05-26 Yao Qi <yao@codesourcery.com>
334 * gdb_thread_db.h: Delete. Move to ...
335 * common/gdb_thread_db.h: ... here.
337 2011-05-26 Pedro Alves <pedro@codesourcery.com>
339 * infcmd.c (finish_backward): Set a step-resume breakpoint at the
340 function's entry point instead of a manually managed momentary
341 breakpoint, and only ever issue one proceed call.
342 * infrun.c (handle_inferior_event) <BPSTAT_WHAT_STEP_RESUME>: If
343 doing a reverse-finish, switch to stepi mode, to do another step.
344 (insert_step_resume_breakpoint_at_sal): Make public.
345 (normal_stop): No need to save function value return registers if
347 * inferior.h (insert_step_resume_breakpoint_at_sal): Declare.
349 2011-05-26 Pedro Alves <pedro@codesourcery.com>
351 * breakpoint.h (enum bptype) <bp_hp_step_resume>: New.
352 (enum bpstat_what_main_action): Move BPSTAT_WHAT_STEP_RESUME
353 before BPSTAT_WHAT_STOP_SILENT. Add BPSTAT_WHAT_HP_STEP_RESUME
355 * breakpoint.c (update_breakpoints_after_exec): Also delete hp
356 step-resume breakpoints.
357 (print_it_typical): Handle bp_hp_step_resume.
358 (bpstat_what): Ditto.
359 (bptype_string): Ditto.
360 (print_one_breakpoint_location): Ditto.
361 (allocate_bp_location): Ditto.
363 (breakpoint_re_set_one): Ditto.
364 * infrun.c (handle_inferior_event): Adjust. Split
365 BPSTAT_WHAT_STEP_RESUME handling in BPSTAT_WHAT_STEP_RESUME and
366 BPSTAT_WHAT_HP_STEP_RESUME.
367 (insert_step_resume_breakpoint_at_sal): Rename to ...
368 (insert_step_resume_breakpoint_at_sal_1): ... this. Add bptype
369 parameter. Handle it.
370 (insert_step_resume_breakpoint_at_sal): Reimplement on top of
371 insert_step_resume_breakpoint_at_sal_1.
372 (insert_step_resume_breakpoint_at_frame): Rename to ...
373 (insert_hp_step_resume_breakpoint_at_frame): ... this. Adjust to
374 set a high-priority step-resume breakpoint.
375 (insert_step_resume_breakpoint_at_frame): Adjust comment.
376 (insert_step_resume_breakpoint_at_caller): Ditto.
378 2011-05-26 Pedro Alves <pedro@codesourcery.com>
380 * breakpoint.c (iterate_over_related_breakpoints): New.
381 (do_map_delete_breakpoint): New.
382 (delete_command): Pass do_map_delete_breakpoint to
383 map_breakpoint_numbers.
384 (do_disable_breakpoint): New.
385 (do_map_disable_breakpoint): Iterate over the breakpoint's related
387 (do_enable_breakpoint): Rename to ...
388 (enable_breakpoint_disp): ... this.
389 (enable_breakpoint): Adjust.
390 (do_enable_breakpoint): New.
391 (enable_once_breakpoint): Delete.
392 (do_map_enable_breakpoint): New.
393 (do_map_enable_once_breakpoint): New.
394 (enable_once_command, enable_delete_command)
395 (delete_trace_command): Iterate over the breakpoint's related
398 2011-05-26 Pedro Alves <pedro@codesourcery.com>
400 * alpha-tdep.c (alpha_cannot_fetch_register): Don't return true
401 for ALPHA_ZERO_REGNUM.
402 (alpha_supply_int_regs): Explicitly supply zero as the value for
403 ALPHA_ZERO_REGNUM in the register cache.
404 * alpha-nat.c (fetch_osf_core_registers): Ditto.
406 2011-05-26 Yao Qi <yao@codesourcery.com>
408 * gdb/gdb_thread_db.h: Remove HAVE_UINTPTR_T.
410 2011-05-26 Tristan Gingold <gingold@adacore.com>
412 * symfile.h (struct dwarf2_section_names): New type.
413 (struct dwarf2_debug_sections): New type.
414 (dwarf2_has_info): Add parameter.
415 * dwarf2read.c (dwarf2_elf_names): New variable.
416 (INFO_SECTION, ABBREV_SECTION, LINE_SECTION, LOC_SECTION)
417 (MACINFO_SECTION, STR_SECTION, RANGES_SECTION, TYPES_SECTION)
418 (FRAME_SECTION, EH_FRAME_SECTION, GDB_INDEX_SECTION): Remove.
419 (dwarf2_has_info): Add names parameter. Pass names
420 to dwarf2_locate_sections.
421 (section_is_p): Rewrite using the names parameter.
422 (dwarf2_locate_sections): Use section names from the names parameter.
423 * coffread.c (coff_symfile_read): Adjust call to dwarf2_has_info.
424 * elfread.c (read_psyms): Ditto.
425 * machoread.c (macho_symfile_read): Ditto.
427 2011-05-25 Andreas Schwab <schwab@redhat.com>
430 * event-loop.c (handle_file_event): Don't handle POLLHUP as error.
432 2011-05-24 Keith Seitz <keiths@redhat.com>
435 * linespec.c (keep_name_info): Add handling for "volatile" keyword.
436 (decode_compound): Unconditionally call keep_name_info.
438 2011-05-24 Pedro Alves <pedro@codesourcery.com>
440 * breakpoint.c (watchpoint_check): If the watchpoint went out of
441 scope, clear its command list.
442 (map_breakpoint_numbers): Don't walk the related breakpoints list
445 2011-05-24 Tom Tromey <tromey@redhat.com>
447 * MAINTAINERS: Move Jim Blandy to past maintainers.
449 2011-05-24 Tristan Gingold <gingold@adacore.com>
451 * symfile.h (enum dwarf2_section_enum): New type.
452 (dwarf2_get_section_info): New prototype.
453 * dwarf2read.c (dwarf2_get_section_info): Replace parameter
454 section_name by sect. Use a switch to select the info.
455 * dwarf2-frame.c (warf2_get_section_info): Remove prototype.
456 (dwarf2_build_frame_info): Adjust calls to dwarf2_get_section_info.
458 2011-05-24 Pedro Alves <pedro@codesourcery.com>
460 * solib-svr4.c (svr4_solib_create_inferior_hook): Skip setting
461 shared library event breakpoint if there's no execution.
463 2011-05-24 Thiago Jung Bauermann <bauerman@br.ibm.com>
465 * breakpont.c (remove_hw_watchpoints): Remove unused function.
466 * breakpoint.h remove_hw_watchpoints(): Remove prototype.
468 2011-05-23 Tom Tromey <tromey@redhat.com>
470 * c-lang.c (evaluate_subexp_c): Use expect_type if it is not
473 2011-05-23 Doug Evans <dje@google.com>
475 * python/lib/gdb/printing.py (register_pretty_printer): Add missing
476 entry for RuntimeError to doc string.
478 2011-05-23 Jerome Guitton <guitton@adacore.com>
480 * sparc-tdep.c (sparc_skip_stack_check): Recognize a new instruction
481 sequence for probing loops.
483 2011-05-23 Pedro Alves <pedro@codesourcery.com>
485 * infrun.c (user_visible_resume_ptid): Fix typos in describing
488 2011-05-21 Mark Kettenis <kettenis@gnu.org>
490 * sparc-nat.c (sparc_fetch_inferior_registers): Explicitly supply
491 zero as the value for %g0 in the register cache.
492 * sparc-tdep.c (sparc32_supply_gregset): Likewise.
493 * sparc64-tdep.c (sparc64_supply_gregset): Likewise.
495 2011-05-20 Pedro Alves <pedro@codesourcery.com>
497 * infrun.c (proceed): Set previous_inferior_ptid here.
498 (init_wait_for_inferior): Initialize previous_inferior_ptid from
499 inferior_ptid, not null_ptid.
500 (wait_for_inferior): Don't initialize previous_inferior_ptid here.
501 (fetch_inferior_event): Nor here.
503 2011-05-20 Pedro Alves <pedro@codesourcery.com>
505 * inf-loop.c (inferior_event_handler): Only output a message if
508 2011-05-20 Luis Machado <lgustavo@codesourcery.com>
510 * MAINTAINERS: Update my e-mail address.
512 2011-05-20 Pedro Alves <pedro@codesourcery.com>
514 * infrun.c (proceed): Switch the inferior event loop to
515 INF_EXEC_COMPLETE if the target refused to resume from a
518 2011-05-20 Pedro Alves <pedro@codesourcery.com>
520 * infcmd.c: Include "inf-loop.h".
521 (step_once): When stepping into an inline subroutine, pretend the
522 target has run. If the target can async, switch the inferior
523 event loop to INF_EXEC_COMPLETE.
524 * inferior.h (user_visible_resume_ptid): Declare.
525 * infrun.c (user_visible_resume_ptid): New function, factored out
528 * mi/mi-main.c (mi_execute_async_cli_command): Remove assertion
529 that the current thread is running. Merge async and sync
532 2011-05-20 Pedro Alves <pedro@codesourcery.com>
534 * infcmd.c (step_1): Simplify synchronous case.
536 2011-05-20 Pedro Alves <pedro@codesourcery.com>
538 * tracepoint.c: Include exceptions.h.
539 (TFILE_PID): Move higher in file.
540 (tfile_open): Delay pushing the tfile target until we're assured
541 the tfile header is present in the file. Wrap reading the initial
542 newline-terminated lines in TRY_CATCH. Pop the target if the
543 initial setup failed. Add the tfile's thread immediately
544 aftwards, before any non-essential setup. Don't skip
545 post_create_inferior if there are no traceframes present in the
547 (tfile_close): Remove redundant check for null before xfree call.
548 (tfile_thread_alive): New function.
549 (init_tfile_ops): Register it as to_thread_alive callback.
551 2011-05-20 Pedro Alves <pedro@codesourcery.com>
553 * tracepoint.c (tfile_open): Delete #if 0'd code.
555 2011-05-20 Jan Kratochvil <jan.kratochvil@redhat.com>
557 Fix -readnow for -gdwarf-4 unused type units.
558 * dwarf2read.c (struct signatured_type): Remove the field offset.
559 (create_signatured_type_table_from_index): Remove its initialization.
560 (create_debug_types_hash_table): Likewise. Initialize per_cu.offset
561 instead. Add a complaint call.
562 (process_psymtab_comp_unit): Change assignment to gdb_assert.
563 (process_type_comp_unit, lookup_die_type, dump_die_shallow)
564 (lookup_signatured_type_at_offset, read_signatured_type)
565 (write_one_signatured_type): Update the field for per_cu.
567 2011-05-19 Tom Tromey <tromey@redhat.com>
569 * python/py-inferior.c (python_inferior_exit): Use
571 (python_on_resume): Likewise.
573 2011-05-19 Matt Rice <ratmice@gmail.com>
575 * breakpoint.c (bpstat_do_actions_1): Call prevent_dont_repeat.
577 2011-05-19 Hui Zhu <teawater@gmail.com>
579 * tracepoint.c (tfile_trace_find): Return directly when num is -1.
581 2011-05-19 Hui Zhu <teawater@gmail.com>
583 * xcoffread.c (read_xcoff_symtab): Initialize fcn_aux_saved.
585 2011-05-18 Tom Tromey <tromey@redhat.com>
587 * dwarf2read.c (dwarf2_add_field): Constify.
588 * value.c (value_static_field): Constify.
589 * gdbtypes.h (struct main_type) <field.field_location.physname>:
591 * ax-gdb.c (gen_static_field): Constify
593 2011-05-18 Jan Kratochvil <jan.kratochvil@redhat.com>
595 * linux-nat.c (kill_callback): Use SIGKILL first.
597 2011-05-18 Joel Brobecker <brobecker@adacore.com>
599 * ada-lang.c (print_it_exception): Avoid use of sprintf.
601 2011-05-18 Tom Tromey <tromey@redhat.com>
603 * value.c (value_fn_field): Constify.
604 * symtab.c (gdb_mangle_name): Constify.
605 * stabsread.c (update_method_name_from_physname): Make 'physname'
607 * p-typeprint.c (pascal_type_print_method_args): Make arguments
608 const. Use explicit fputc_filtered loop.
609 (pascal_type_print_base): Constify.
610 * p-lang.h (pascal_type_print_method_args): Update.
611 * linespec.c (add_matching_methods): Constify.
612 (add_constructors): Likewise.
613 * jv-typeprint.c (java_type_print_base): Constify.
614 * gdbtypes.h (struct cplus_struct_type)
615 <fn_fieldlist.fn_field.physname>: Now const.
616 * dwarf2read.c (compute_delayed_physnames): Constify.
617 (dwarf2_add_member_fn): Likewise.
618 * c-typeprint.c (c_type_print_base): Constify. Use cleanups.
620 2011-05-18 Pedro Alves <pedro@codesourcery.com>
622 * infrun.c (resume): Mention which is the current thread, and its
623 current PC in debug output.
624 (prepare_to_proceed): Mention the thread switching in debug
627 2011-05-18 Tom Tromey <tromey@redhat.com>
629 * linux-thread-db.c (try_thread_db_load_from_pdir_1): Fix absolute
630 path check. Use xmalloc and cleanups.
631 (try_thread_db_load_from_dir): Use xmalloc and cleanups.
633 2011-05-17 Tom Tromey <tromey@redhat.com>
635 * cp-valprint.c (cp_print_value_fields): Catch errors from
638 2011-05-17 Tom Tromey <tromey@redhat.com>
640 * dwarf2read.c (dwarf2_get_die_type): Call
641 get_die_type_at_offset.
642 * dwarf2expr.c (dwarf_get_base_type): Handle NULL return from
643 get_base_type function.
645 2011-05-17 Tomas Martinec <fyzmat@gmail.com>
647 * infrun.c (handle_inferior_event) <handling deferred step>: Clear
650 2011-05-16 Doug Evans <dje@google.com>
652 * python/py-auto-load.c (source_section_scripts): Mention objfile
655 2011-05-15 Doug Evans <dje@google.com>
657 * linux-thread-db.c (try_thread_db_load_from_pdir_1): New function.
658 (try_thread_db_load_from_pdir): Call it. If unable to find
659 libthread_db in directory of libpthread, see if we're looking at
660 the separate-debug-info copy.
662 * python/py-autoload.c (print_script): Print "Missing" instead of
663 "No" for missing scripts.
664 (info_auto_load_scripts): Tweak "Loaded" column to fit "Missing".
666 2011-05-13 Doug Evans <dje@google.com>
668 * ui-file.c (stdio_file_write_async_safe): Add comment.
670 2011-05-14 Hui Zhu <teawater@gmail.com>
672 * ui-file.c (stdio_file_write_async_safe): Add empty check for build.
674 2011-05-13 Doug Evans <dje@google.com>
676 Support $pdir and $sdir in libthread-db-search-path.
677 * NEWS: Mention $sdir,$pdir.
678 * gdb_thread_db.h (LIBTHREAD_DB_SEARCH_PATH): Add $sdir:$pdir.
679 * linux-thread-db.c (try_thread_db_load_from_pdir): New function.
680 (try_thread_db_load_from_sdir): New function.
681 (try_thread_db_load_from_dir): New function.
682 (thread_db_load_search): Handle $pdir, $sdir. Remove trying of
683 system directories if search of libthread-db-search-path fails,
684 that is now done via $sdir.
685 (has_libpthread): New function.
686 (thread_db_load): Remove search for libthread_db in directory of
687 libpthread, that is now done via $pdir.
689 * NEWS: Mention "info auto-load-scripts".
690 * python/py-auto-load.c (struct auto_load_pspace_info): New member
691 script_not_found_warning_printed.
692 (init_loaded_scripts_info): Renamed from create_loaded_scripts_hash,
693 all callers updated. Initialize script_not_found_warning_printed.
694 (get_auto_load_pspace_data_for_loading): New function.
695 (maybe_add_script): New function.
696 (source_section_scripts): Simplify. Only print one warning regardless
697 of the number of auto-load scripts not found.
698 (clear_section_scripts): Clear script_not_found_warning_printed.
699 (auto_load_objfile_script): Record script in hash table.
700 (count_matching_scripts): New function.
701 (maybe_print_script): Renamed from maybe_print_section_script, all
702 callers updated. Rewrite to use ui_out_*.
703 (info_auto_load_scripts): Renamed from
704 maintenance_print_section_scripts, all callers updated.
705 (gdbpy_initialize_auto_load): "maintenance print section-scripts"
706 renamed as "info auto-load-scripts".
708 2011-05-13 Tom Tromey <tromey@redhat.com>
710 * dwarf2expr.c (read_uleb128): Cast intermediate result.
711 (read_sleb128): Likewise.
713 2011-05-13 Tom Tromey <tromey@redhat.com>
715 * dwarf2loc.c (disassemble_dwarf_expression): Fix instruction
718 2011-05-13 Doug Evans <dje@google.com>
720 * linux-nat.c (debug_linux_nat_async): Delete.
721 Replace all references to use debug_linux_nat instead.
722 (show_debug_linux_nat_async): Delete.
723 (sigchld_handler): Call ui_file_write_async_safe instead of
725 (_initialize_linux_nat): Remove `set debug lin-lwp-async'.
726 * ui-file.c (struct ui_file): New member to_write_async_safe.
727 (null_file_write_async_safe): New function.
728 (ui_file_write_async_safe): New function.
729 (set_ui_file_write_async_safe): New function.
730 (ui_file_new): Initialize to_write_async_safe.
731 (stdio_file_write_async_safe): New function.
732 (struct stdio_file): New member fd.
733 (stdio_file_new): Initialize to_write_async_safe, fd.
734 (stdio_file_read, stdio_file_isatty): New stdio->fd instead of calling
736 * ui-file.h (ui_file_write_async_safe_ftype): New typedef.
737 (set_ui_file_write_async_safe): Declare.
738 (ui_file_write_async_safe): Declare.
740 2011-05-13 Tom Tromey <tromey@redhat.com>
742 * utils.c (do_value_free): New function.
743 (make_cleanup_value_free): Likewise.
744 * dwarf2loc.c (dwarf2_evaluate_loc_desc_full): Handle value
746 (dwarf2_loc_desc_needs_frame): Call
747 make_cleanup_value_free_to_mark.
748 * dwarf2expr.h (struct dwarf_expr_context) <mark>: Remove field.
749 * dwarf2expr.c (free_dwarf_expr_context): Don't call
751 (new_dwarf_expr_context): Don't call value_mark.
752 * dwarf2-frame.c (execute_stack_op): Call
753 make_cleanup_value_free_to_mark.
754 * defs.h (make_cleanup_value_free): Declare.
756 2011-05-13 Thiago Jung Bauermann <bauerman@br.ibm.com>
758 * mi/mi-main.c (mi_cmd_execute): Use cleanup from
759 prepare_execute_command.
760 * top.c (prepare_execute_command): Return cleanup.
761 (execute_command): Use cleanup from prepare_execute_command.
762 * top.h (prepare_execute_command): Change prototype to return
764 * defs.h (struct value): Add opaque declaration.
765 (make_cleanup_value_free_to_mark): Add prototype.
766 * utils.c (do_value_free_to_mark): New function.
767 (make_cleanup_value_free_to_mark): Likewise.
769 2011-05-12 Tom Tromey <tromey@redhat.com>
771 * dwarf2expr.c (execute_stack_op) <DW_OP_shr>: Unconditionally
772 cast left-hand-side to unsigned.
774 2011-05-12 Tom Tromey <tromey@redhat.com>
777 * value.h (value_from_contents): Declare.
778 * value.c (value_from_contents): New function.
779 * dwarf2read.c (dwarf_stack_op_name): Add new values.
780 (dwarf2_get_die_type): New function.
781 * dwarf2loc.c (dwarf_expr_get_base_type): New function.
782 (allocate_piece_closure): Acquire reference to values.
783 (read_pieced_value): Update for value-based expressions.
784 (write_pieced_value): Likewise.
785 (free_pieced_value_closure): Call value_free as needed.
786 (dwarf2_evaluate_loc_desc_full): Set get_base_type field.
787 Update for value-based expressions.
788 * dwarf2loc.h (dwarf2_get_die_type): Declare.
789 * dwarf2expr.h (struct dwarf_stack_value) <value>: Change type.
790 <get_base_type>: New field.
791 (struct dwarf_expr_piece) <v.value>: Change type.
792 <v.regno>: New field.
793 (struct dwarf_expr_context) <mark>: New field.
794 (dwarf_expr_piece, dwarf_expr_fetch): Update.
795 (dwarf_expr_pop, dwarf_expr_push): Remove.
796 (dwarf_expr_push_address): Declare.
797 * dwarf2expr.c (dwarf_arch_cookie): New global.
798 (struct dwarf_gdbarch_types): New.
799 (dwarf_gdbarch_types_init, dwarf_expr_address_type): New
801 (dwarf_expr_push): Change type of 'value' argument. Update. Now
803 (dwarf_expr_push_address): New function.
804 (dwarf_expr_pop): Now static.
805 (dwarf_expr_fetch): Change return type.
806 (dwarf_require_integral): New function.
807 (dwarf_expr_fetch): Simplify.
809 (base_types_equal_p, dwarf_get_base_type, get_unsigned_type): New
811 (execute_stack_op) <sign_ext>: Remove.
812 Use values for DWARF stack.
813 <DW_OP_GNU_const_type, DW_OP_GNU_deref_type,
814 DW_OP_GNU_regval_type, DW_OP_GNU_convert, DW_OP_GNU_reinterpret>:
816 (_initialize_dwarf2expr): New function.
818 (new_dwarf_expr_context): Set new field.
819 (free_dwarf_expr_context): Call value_free_to_mark.
820 * dwarf2-frame.c (no_base_type): New function.
821 (execute_stack_op): Set get_base_type field. Update.
823 2011-05-12 Tom Tromey <tromey@redhat.com>
825 * dwarf2read.c (read_common_block): Fix formatting.
827 2011-05-12 Kwok Cheung Yeung <kcy@codesourcery.com>
829 * breakpoint.c (disable_breakpoint): Disable all locations
830 associated with a tracepoint on target if a trace experiment is
832 (disable_command): Disable a specific tracepoint location on target if
833 a trace experiment is running.
834 (do_enable_breakpoint): Enable all locations associated with a
835 tracepoint on target if a trace experiment is running.
836 (enable_command) Enable a specific tracepoint location on target if a
837 trace experiment is running.
838 * target.c (update_current_target): Add INHERIT and de_fault clauses for
839 to_supports_enable_disable_tracepoint, to_enable_tracepoint and
840 to_disable_tracepoint.
841 * target.h: Add declaration of struct bp_location.
842 (struct target_ops): Add new functions
843 to_supports_enable_disable_tracepoint, to_enable_tracepoint and
844 to_disable_tracepoint to target operations.
845 (target_supports_enable_disable_tracepoint): New macro.
846 (target_enable_tracepoint): New macro.
847 (target_disable_tracepoint): New macro.
848 * remote.c (struct remote_state): Add new field.
849 (remote_enable_disable_tracepoint_feature): New.
850 (remote_protocol_features): Add new entry.
851 (remote_supports_enable_disable_tracepoint): New.
852 (remote_enable_tracepoint): New.
853 (remote_disable_tracepoint): New.
854 (init_remote_ops): Add remote_enable_tracepoint,
855 remote_disable_tracepoint and remote_supports_enable_disable_tracepoint
856 to remote operations.
857 * tracepoint.c (start_tracing): Allow tracing to start without any
858 tracepoints enabled with just a warning if they can be re-enabled
860 * NEWS: Add news item for the new behaviour of the enable and disable
861 GDB commands when applied to tracepoints.
862 Add news items for the new remote packets QTEnable and QTDisable.
864 2011-05-11 Jan Kratochvil <jan.kratochvil@redhat.com>
866 * config.in: Regenerate.
867 * configure: Regenerate.
868 * configure.ac <--with-system-readline> (for readline_echoing_p):
870 * tui/tui-io.c (tui_old_readline_echoing_p): Rename to ...
871 (tui_old_rl_echoing_p): ... here.
872 (tui_setup_io): Rename extern declaration readline_echoing_p to
873 _rl_echoing_p. Adjust assignments for the both renames.
875 2011-05-11 Thiago Jung Bauermann <bauerman@br.ibm.com>
877 * symtab.c (lookup_symtab): Run cleanup before returning.
879 2011-05-11 Tom Tromey <tromey@redhat.com>
881 * dwarf2read.c (handle_data_member_location): New function.
882 (dwarf2_add_field): Use it.
883 (read_common_block): Likewise.
885 2011-05-11 Jan Kratochvil <jan.kratochvil@redhat.com>
887 Make addrs->SECTINDEX always defined.
888 * symfile.c (relative_addr_info_to_section_offsets): Check for
889 SECTINDEX -1, not for zero ADDR.
890 (addrs_section_compar): Remove checking for invalid SECTINDEX.
891 (addr_info_make_relative): Set SECTINDEX to -1 for unmatched entries.
892 * symfile.h (struct section_addr_info) <sectindex>: Update the comment
895 2011-05-10 Doug Evans <dje@google.com>
897 * linux-thread-db.c: Whitespace cleanup.
898 (try_thread_db_load_1): Fix comment.
900 * linux-thread-db.c (set_libthread_db_search_path): New function.
901 (_initialize_thread_db): Add setter for libthread-db-search-path.
903 2011-05-09 Doug Evans <dje@google.com>
905 * NEWS: Mention --with-iconv-bin.
906 * configure.ac: New option --with-iconv-bin.
907 * configure: Regenerate.
908 * config.in: Regenerate.
909 * defs.h (relocate_gdb_directory): Declare.
910 * main.c (relocate_gdb_directory): Renamed from relocate_directory,
911 removed progname parameter, and exported. All callers updated.
912 * charset.c (find_charset_names): Use --with-iconv-bin if specified.
914 * linux-nat.c (lin_lwp_attach_lwp): For !WIPSTOPPED case,
915 adding missing call to restore_child_signals_mask.
917 2011-05-09 Pedro Alves <pedro@codesourcery.com>
919 * inferior.h (wait_for_inferior): Remove `thread_exec_as_sigtrap'
921 * infrun.c (proceed, start_remote): Adjust.
922 (wait_for_inferior): Remove `thread_exec_as_sigtrap' parameter,
923 and adjust to not handle it.
924 * solib-irix.c (irix_solib_create_inferior_hook): Adjust.
925 * solib-osf.c (osf_solib_create_inferior_hook): Adjust.
926 * solib-sunos.c (sunos_solib_create_inferior_hook): Adjust.
927 * solib-svr4.c (svr4_solib_create_inferior_hook): Adjust.
928 * windows-nat.c (do_initial_windows_stuff): Adjust.
929 * infcmd.c (attach_command): Adjust.
930 (notice_new_inferior): Adjust.
932 2011-05-06 Ulrich Weigand <uweigand@de.ibm.com>
934 * ppc-linux-tdep.c (ppu2spu_prev_register): Handle pseudo registers.
935 (ppu2spu_unwind_register): Mark pseudo registers unavailable.
936 * spu-tdep.c (op_selb): Use correct value.
938 2011-05-06 Ulrich Weigand <uweigand@de.ibm.com>
940 * spu-linux-nat.c (spu_symbol_file_add_from_memory): Add NULL
941 "parent" parameter to symbol_file_add_from_bfd call.
943 2011-05-06 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
944 Thiago Jung Bauermann <bauerman@br.ibm.com>
946 Implement support for PowerPC BookE masked watchpoints.
947 * NEWS: Mention masked watchpoint support. Create "Changed commands"
949 * breakpoint.h (struct breakpoint_ops) <works_in_software_mode>: New
950 method. Initialize to NULL in all existing breakpoint_ops instances.
951 (struct breakpoint) <hw_wp_mask>: New field.
952 * breakpoint.c (is_masked_watchpoint): Add prototype.
953 (update_watchpoint): Don't set b->val for masked watchpoints. Call
954 breakpoint's breakpoint_ops.works_in_software_mode if available.
955 (watchpoints_triggered): Handle the case of a hardware masked
957 (watchpoint_check): Likewise.
958 (works_in_software_mode_watchpoint): New function.
959 (insert_masked_watchpoint, remove_masked_watchpoint)
960 (resources_needed_masked_watchpoint)
961 (works_in_software_mode_masked_watchpoint, print_it_masked_watchpoint)
962 (print_one_detail_masked_watchpoint, print_mention_masked_watchpoint)
963 (print_recreate_masked_watchpoint, is_masked_watchpoint): New
965 (masked_watchpoint_breakpoint_ops): New structure.
966 (watch_command_1): Check for the existence of the `mask' parameter.
967 Set b->ops according to the type of hardware watchpoint being created.
968 * ppc-linux-nat.c (ppc_linux_insert_mask_watchpoint)
969 (ppc_linux_remove_mask_watchpoint)
970 (ppc_linux_masked_watch_num_registers): New functions.
971 (_initialize_ppc_linux_nat): Initialize to_insert_mask_watchpoint,
972 to_remove_mask_watchpoint and to_masked_watch_num_registers.
973 * target.c (update_current_target): Mention to_insert_mask_watchpoint,
974 to_remove_mask_watchpoint, and to_masked_watch_num_registers.
975 (target_insert_mask_watchpoint, target_remove_mask_watchpoint)
976 (target_masked_watch_num_registers): New functions.
977 * target.h (struct target_ops) <to_insert_mask_watchpoint>,
978 <to_remove_mask_watchpoint>, <to_masked_watch_num_registers>: New
980 (target_insert_mask_watchpoint, target_remove_mask_watchpoint)
981 (target_masked_watch_num_registers): Add prototypes.
983 2011-05-06 Jan Kratochvil <jan.kratochvil@redhat.com>
986 * dwarf2read.c (struct dwarf2_cu): New field has_loclist.
987 (producer_is_gcc_ge_4_0): New function.
988 (process_full_comp_unit): Set also symtab->locations_valid. Move the
989 symtab->language code.
990 (var_decode_location): Set cu->has_loclist.
991 * symtab.c (skip_prologue_sal): New variables saved_pc, force_skip and
992 skip. Intialize force_skip from locations_valid. Move the prologue
993 skipping code into two passes.
994 * symtab.h (struct symtab): Make the primary field a bitfield. New
995 field locations_valid.
997 2011-05-06 Jan Kratochvil <jan.kratochvil@redhat.com>
999 * c-exp.y (qualified_name): Call destructor_name_p with $1.type.
1000 (classify_inner_name): Call cp_lookup_nested_type with
1002 * cp-namespace.c (cp_lookup_nested_type): New variable
1003 saved_parent_type. Call CHECK_TYPEDEF for parent_type. Call
1004 type_name_no_tag_or_error with saved_parent_type.
1005 * dwarf2read.c (load_partial_dies): Read in any children of
1006 DW_TAG_typedef with complaint in such case.
1007 * gdbtypes.c (type_name_no_tag_or_error): New function.
1008 * gdbtypes.h (type_name_no_tag_or_error): New prototype.
1009 * valops.c (destructor_name_p): New comment for parameter type. Remove
1010 type const. Make dname and cp const. Call type_name_no_tag_or_error.
1011 * value.h (destructor_name_p): Remove type const.
1013 2011-05-06 Jan Kratochvil <jan.kratochvil@redhat.com>
1015 * symtab.c (compare_symbol_name): New function.
1016 (completion_list_add_name, expand_partial_symbol_name): Call it,
1017 remove the variable ncmp.
1018 (default_make_symbol_completion_list_break_on): Reduce SYM_TEXT_LEN,
1021 2011-05-05 Thiago Jung Bauermann <bauerman@br.ibm.com>
1023 Demote to sw watchpoint only in update_watchpoint.
1024 * breakpoint.c (update_watchpoint): Change between software and
1025 hardware watchpoint for all kinds of watchpoints, not just
1026 read/write ones. Determine b->exact value here instead of
1027 in watch_command_1. Error out if there are not enough resources
1028 for a read or access hardware watchpoint.
1029 (watch_command_1): Remove logic of checking whether there are
1030 enough resources available, since update_watchpoint will do that
1031 work now. Don't set b->exact here. Catch exceptions thrown by
1032 update_watchpoint and delete the watchpoint.
1033 (can_use_hardware_watchpoint): Remove exact_watchpoints argument.
1034 Use target_exact_watchpoints instead.
1035 (delete_breakpoint): Notify observers only if deleted watchpoint
1036 has a breakpoint number assigned to it.
1038 2011-05-05 Janis Johnson <janisjo@codesourcery.com>
1040 * MAINTAINERS: Add myself as a write-after-approval maintainer.
1042 2011-05-05 Jerome Guitton <guitton@adacore.com>
1044 * i386-tdep.c (i386_in_stack_tramp_p, i386_stack_tramp_frame_sniffer):
1046 (i386_stack_tramp_frame_unwind): New static global.
1047 (i386_match_pattern): New function, extracted from i386_match_insn.
1048 (i386_match_insn): Use i386_match_pattern.
1049 (i386_match_insn_block): New function.
1050 (i386_tramp_chain_in_reg_insns)
1051 (i386_tramp_chain_on_stack_insns): New static variables.
1052 (i386_gdbarch_init): Add i386_stack_tramp_frame_unwind to list
1055 2011-05-04 Joseph Myers <joseph@codesourcery.com>
1057 * configure.host (xscale*): Don't handle target.
1058 * configure.tgt (thumb*-*-* | strongarm*-*-* | xscale-*-*): Don't
1061 2011-05-04 Yao Qi <yao@codesourcery.com>
1063 * gdb_wait.h: remove WAITTYPE and WCOREDUMP.
1065 2011-05-03 Joel Brobecker <brobecker@adacore.com>
1068 | 2011-03-07 Michael Snyder <msnyder@vmware.com>
1069 | * elfread.c (elf_symtab_read): Stop memory leak.
1071 2011-05-03 Pierre Muller <muller@ics.u-strasbg.fr>
1073 * nto-tdep.c (nto_target): Replace deprecated call to
1074 cygwin_conv_to_posix_path functions by cygwin_conv_path calls.
1076 2011-05-03 Jan Kratochvil <jan.kratochvil@redhat.com>
1078 Fix false GCC warning.
1079 * breakpoint.c (do_enable_breakpoint): Initialize orig_enable_state.
1081 2011-05-03 Thiago Jung Bauermann <bauerman@br.ibm.com>
1083 * breakpoint.c (update_watchpoint): Move code to change
1084 the enable state of breakpoint from here ...
1085 (do_enable_breakpoint): ... to here.
1087 2011-04-26 Andrew Gontarek <andrewg@cray.com>
1089 * valprint.c (val_print_array_elements): Fixed poor performance
1090 of printing very large arrays with repeat_count_threshold set
1091 to unlimited. New comment.
1093 2011-04-29 Tom Tromey <tromey@redhat.com>
1095 * mi/mi-parse.c (mi_parse): Remove incorrect sizeof.
1096 (mi_parse): Likewise.
1097 * breakpoint.c (break_range_command): Use sizeof char*, not
1099 (create_breakpoint): Likewise.
1100 (parse_breakpoint_sals): Likewise.
1102 2011-04-29 Pedro Alves <pedro@codesourcery.com>
1104 * linux-nat.c (linux_child_remove_fork_catchpoint)
1105 (linux_child_remove_vfork_catchpoint)
1106 (linux_child_remove_exec_catchpoint): New functions.
1107 (linux_target_install_ops): Install them.
1109 2011-04-29 Phil Muldoon <pmuldoon@redhat.com>
1113 * varobj.c (install_default_visualizer): Do not install a
1114 visualizer if the varobj is CPLUS_FAKE_CHILD.
1115 (construct_visualizer): Likewise.
1117 2011-04-28 Jan Kratochvil <jan.kratochvil@redhat.com>
1119 * symtab.c (expand_partial_symbol_name): New variable NCMP. Support
1120 case insensitive comparison.
1122 2011-04-28 Ulrich Weigand <ulrich.weigand@linaro.org>
1124 * infrun.c (proceed): Revert previous change.
1125 (resume): Instead, handle the case of signal delivery while stepping
1126 off a breakpoint location here, and only if software single-stepping
1127 is used. Handle nested signals.
1129 2011-04-28 Yao Qi <yao@codesourcery.com>
1131 * arm-tdep.c (copy_unmodified): Rename to ...
1132 (arm_copy_unmodified): .. this. New.
1133 (copy_preload): Move common part to ...
1134 (install_preload): .. this. New.
1135 (arm_copy_preload): New.
1136 (copy_preload_reg): Move common part to ...
1137 (install_preload_reg): ... this. New.
1138 (arm_copy_preload_reg): New.
1139 (copy_b_bl_blx): Move common part to ...
1140 (install_b_bl_blx): .. this. New.
1141 (arm_copy_b_bl_blx): New.
1142 (copy_bx_blx_reg): Move common part to ...
1143 (install_bx_blx_reg): ... this. New.
1144 (arm_copy_bx_blx_reg): New.
1145 (copy_alu_reg): Move common part to ...
1146 (install_alu_reg): ... this. New.
1147 (arm_copy_alu_reg): New.
1148 (copy_alu_shifted_reg): Move common part to ...
1149 (install_alu_shifted_reg): ... this. New.
1150 (copy_ldr_str_ldrb_strb): Move common part to ...
1151 (install_ldr_str_ldrb_strb): ... this. New.
1152 (arm_copy_ldr_str_ldrb_strb): New.
1153 (copy_copro_load_store): Move some common part to ...
1154 (install_copy_copro_load_store): ... this. New.
1155 (arm_copy_copro_load_store): New.
1157 (arm_copy_svc): Renamed from copy_svc.
1158 (copy_undef): Delete.
1159 (arm_copy_undef): Renamed from copy_undef.
1160 (decode_ext_reg_ld_st): Delete.
1161 (arm_decode_ext_reg_ld_st): Renamed from decode_ext_reg_ld_st.
1162 (decode_svc_copro): Delete.
1163 (arm_decode_svc_copro): Renamed from decode_svc_copro.
1164 (copy_copro_load_store, copy_alu_imm): update callers.
1165 (copy_extra_ld_st, copy_block_xfer): Likewise.
1166 (decode_misc_memhint_neon, decode_unconditional): Likewise.
1167 (decode_miscellaneous, decode_dp_misc): Likewise.
1168 (decode_ld_st_word_ubyte, decode_media): Likewise.
1169 (decode_b_bl_ldmstm, decode_ext_reg_ld_st): Likewise.
1170 (decode_svc_copro, decode_misc_memhint_neon): Likewise.
1171 (decode_unconditional, decode_miscellaneous): Likewise.
1172 (decode_media, decode_b_bl_ldmstm): Likewise.
1173 (arm_process_displaced_insn): Likewise..
1174 (decode_misc_memhint_neon): Delete.
1175 (arm_decode_misc_memhint_neon): Renamed from decode_misc_memhint_neon.
1176 (decode_miscellaneous): Delete.
1177 (arm_decode_miscellaneous): Renamed from decode_miscellaneous.
1178 (decode_dp_misc): Delete.
1179 (arm_decode_dp_misc): Renamed from decode_dp_misc.
1180 (decode_ld_st_word_ubyte): Delete.
1181 (arm_decode_ld_st_word_ubyte): Renamed from decode_ld_st_word_ubyte.
1182 (decode_media): Delete.
1183 (arm_decode_media): Renamed from decode_media.
1184 (decode_b_bl_ldmstm): Delete.
1185 (arm_decode_b_bl_ldmstm): Renamed from decode_b_bl_ldmstm.
1186 (decode_ext_reg_ld_st): Delete.
1187 (arm_decode_ext_reg_ld_st): Renamed from decode_ext_reg_ld_st.
1188 (decode_unconditional): Delete.
1189 (arm_decode_unconditional): Renamed from decode_unconditional.
1191 2011-04-27 Jan Kratochvil <jan.kratochvil@redhat.com>
1193 Case insensitive lookups implementation.
1194 * dwarf2read.c: Include ctype.h.
1195 (struct mapped_index): New field version.
1196 (mapped_index_string_hash): New parameter index_version. New comment
1197 for it. Call tolower appropriately.
1198 (find_slot_in_mapped_hash): New variable cmp, initialize it, use it.
1199 Choose the right index version for mapped_index_string_hash.
1200 (dwarf2_read_index): Support also the index version 5. Initialize the
1201 new struct mapped_index field version.
1202 (hash_strtab_entry): Pass INT_MAX for the new parameter, explain why.
1203 (find_slot): Explain the version needs. Pass INT_MAX for the new
1205 (write_psymtabs_to_index): Produce version 5.
1206 * minsyms.c (lookup_minimal_symbol): New variable cmp, initialize it,
1207 use it. New comment for SYMBOL_MATCHES_SEARCH_NAME.
1208 * psymtab.c (lookup_partial_symbol): Find the
1209 SYMBOL_MATCHES_SEARCH_NAME start of the found block of matching
1211 * symtab.c (lookup_symbol_in_language): Remove the case_sensitive_off
1213 (search_symbols): Pass REG_ICASE to regcomp for case_sensitive_off.
1214 (completion_list_add_name): New variable ncmp, initialize it, use it.
1215 * symtab.h (SYMBOL_HASH_NEXT): Always call tolower.
1216 * utils.c (strcmp_iw): Support case_sensitive_off.
1217 (strcmp_iw_ordered): Sort in a way compatible with case_sensitive_off.
1218 New function comment part. New variables saved_string1,
1219 saved_string2 and case_pass. Add a proper second pass.
1221 2011-04-27 Jan Kratochvil <jan.kratochvil@redhat.com>
1223 Replace re_comp/re_exec by regcomp/regexec.
1224 * symtab.c (struct search_symbols_data): New fields preg, preg_p.
1225 (search_symbols_name_matches): Use them, use regexec.
1226 (search_symbols): New variable retval_chain, adjust the use of
1227 old_chain against it. Replace re_comp by regcomp. Use the new struct
1228 search_symbols_data fields, use regexec instead of re_exec.
1230 2011-04-27 Jan Kratochvil <jan.kratochvil@redhat.com>
1232 Format the code for the next patch.
1233 * dwarf2read.c (struct mapped_index): Include delimiting newlines.
1234 * utils.c (strcmp_iw_ordered): Reformat the code for the next patch.
1235 New variables c1 and c2.
1237 2011-04-27 Ulrich Weigand <ulrich.weigand@linaro.org>
1239 * infrun.c (proceed): Do not single-step into signal delivery
1240 when stepping off a breakpoint location.
1241 (insert_step_resume_breakpoint_at_frame): Move prototype earlier.
1242 (insert_step_resume_breakpoint_at_caller): Likewise.
1243 (insert_step_resume_breakpoint_at_sal): Likewise.
1244 (insert_longjmp_resume_breakpoint): Likewise.
1246 2011-04-27 Yao Qi <yao@codesourcery.com>
1248 * common/linux-ptrace.h: Remove include <sys/wait.h>.
1250 2011-04-27 Joel Brobecker <brobecker@adacore.com>
1252 * procfs.c (procfs_pass_signals): Fix advance declaration.
1254 2011-04-27 Ulrich Weigand <ulrich.weigand@linaro.org>
1256 * target.h (struct target_ops): Remove to_notice_signals;
1257 add to_pass_signals.
1258 (target_notice_signals): Remove.
1259 (target_pass_signals): Add prototype.
1260 * target.c (update_current_target): Remove to_notice_signals;
1261 mention to_pass_signals.
1262 (target_pass_signals): New function.
1263 (debug_to_notice_signals): Remove.
1264 (setup_target_debug): Do not install debug_to_notice_signals.
1266 * infrun.c (signal_pass): New global.
1267 (resume): Call target_pass_signals.
1268 (handle_inferior_event): Report all signals while stepping over
1269 non-steppable watchpoint. Reset trap_expected to ensure breakpoints
1270 are re-inserted when stepping over a signal handler.
1271 (signal_cache_update): New function.
1272 (signal_stop_update): Call it.
1273 (signal_print_update): Likewise.
1274 (signal_pass_update): Likewise.
1275 (handle_command): Call signal_cache_update and target_pass_signals
1276 instead of target_notice_signals.
1277 (_initialize_infrun): Initialize signal_pass.
1279 * linux-nat.c (pass_mask): New global.
1280 (linux_nat_pass_signals): New function.
1281 (linux_nat_create_inferior): Report all signals initially.
1282 (linux_nat_attach): Likewise.
1283 (linux_nat_resume): Use pass_mask to decide whether to directly
1284 handle an inferior signal.
1285 (linux_nat_wait_1): Likewise.
1286 (linux_nat_add_target): Install to_pass_signals callback.
1288 * nto-procfs.c (notice_signals): Remove.
1289 (procfs_resume): Do not call notice_signals.
1290 (procfs_notice_signals): Remove.
1291 (procfs_pass_signals): New function.
1292 (init_procfs_ops): Install to_pass_signals callback instead of
1293 to_notice_signals callback.
1294 (_initialize_procfs): Report all signals initially.
1296 * procfs.c (procfs_notice_signals): Remove.
1297 (procfs_pass_signals): New function.
1298 (procfs_target): Install to_pass_signals callback instead of
1299 to_notice_signals callback.
1300 (register_gdb_signals): Remove.
1301 (procfs_debug_inferior): Report all signals initially.
1302 (procfs_init_inferior): Remove redundant register_gdb_signals call.
1304 * remote.c (remote_pass_signals): Add numsigs and pass_signals
1305 parameters; use them instead of calling signal_..._state routines.
1306 (remote_notice_signals): Remove.
1307 (remote_start_remote): Report all signals initially.
1308 (remote_resume): Do not call remote_pass_signals.
1309 (_initialize_remote): Install to_pass_signals callback instead of
1310 to_notice_signals callback.
1312 2011-04-27 Pedro Alves <pedro@codesourcery.com>
1314 * breakpoint.c (user_settable_breakpoint): Delete.
1315 (user_breakpoint_p): Remove check on user_settable_breakpoint.
1316 (delete_command): Check user_breakpoint_p instead of looking at
1317 the breakpoint's type.
1318 (disable_command): Ditto.
1319 (enable_command): Ditto.
1320 (delete_trace_command): Use user_breakpoint_p instead of looking
1321 at the breakpoint number directly. When checking if there are
1322 user visible tracepoints, in order to know whether to ask the user
1323 for confirmation, check whether the breakpoint is actually a
1326 2011-04-27 Vladimir Prus <vladimir@codesourcery.com>
1328 * python/py-breakpoint.c (gdbpy_breakpoint_created): Fix
1331 2011-04-27 Vladimir Prus <vladimir@codesourcery.com>
1333 MI breakpoint notifications.
1335 * annotate.c (breakpoint_changed): Adjust parameter type.
1336 * breakpoint.c (set_breakpoint_condition): Adjust to change
1337 in breakpoint_modified type.
1338 (breakpoint_set_commands): Likewise.
1339 (do_map_commands_command): Likewise.
1340 (bpstat_check_breakpoint_conditions): Notify that breakpoint has
1341 changed after bumping hit count.
1342 (bpstat_stop_status): Likewise.
1343 (print_one_breakpoint_location): Don't wrap in tuple here.
1344 (print_one_breakpoint): Always print individual locations.
1345 For locations, use unnamed tuple.
1346 (disable_breakpoints_in_unloaded_shlib): Notify that breakpoint
1348 (create_catchpoint, create_syscall_event_catchpoint): Call
1349 breakpoint_created obsever.
1350 (mention): Don't call breakpoint_created observer.
1351 (create_breakpoint_sal): Call breakpoint_created observer.
1352 (create_breakpoint, watch_command_1): Likewise.
1353 (create_ada_exception_breakpoint): Likewise.
1354 (delete_breakpoint): Call breakpoint_deleted breakpoint.
1355 (locations_are_equal): New.
1356 (update_breakpoint_locations): If locations were changed, notify.
1357 (set_ignore_count, disable_breakpoint, do_enable_breakpoint):
1358 Call breakpoint_modified observer.
1360 * mi/mi-cmd-break.c (breakpoint_notify): Adjust.
1361 (mi_cmd_break_insert): Don't set observers for modify and delete.
1362 * mi/mi-interp.c (mi_suppress_breakpoint_notifications): New.
1363 (mi_breakpoint_created, mi_breakpoint_deleted)
1364 (mi_breakpoint_modified): New.
1365 (mi_interpreter_init): Hook the above.
1366 * mi/mi-main.c (mi_cmd_execute): Disable breakpoint notifications
1367 while -break-* commands are executing.
1368 * mi/mi-main.h (mi_suppress_breakpoint_notifications): New.
1369 * mi/mi-out.c (struct ui_out_data): New field original_buffer.
1371 (mi_ui_out_impl): Hook in mi_redirect.
1372 (mi_field_skip): True to the name, skip the field, don't output
1373 a field with an empty value.
1375 * python/py-breakpoint.c (gdbpy_breakpoint_created)
1376 (gdbpy_breakpoint_deleted): Adjust.
1377 * tui/tui-hooks.c (tui_event_create_breakpoint)
1378 (tui_event_delete_breakpoint, tui_event_modify_breakpoint): Adjust.
1380 2011-04-26 Aleksandar Ristovski <aristovski@qnx.com>
1382 * nto-procfs.c (procfs_insert_hw_watchpoint): Fix prototype.
1383 (procfs_remove_hw_watchpoint): Likewise.
1385 2011-04-26 Michael Walle <michael@walle.cc>
1387 * remote.c (remote_start_remote): Ack packet after sending the
1390 2011-04-26 Yao Qi <yao@codesourcery.com>
1392 * linux-nat.c: Move common macros to ...
1393 Include linux-ptrace.h.
1394 * common/linux-ptrace.h: ... here. New.
1396 2011-04-25 Jan Kratochvil <jan.kratochvil@redhat.com>
1398 * elfread.c (elf_symfile_read): Protect dwarf2_initialize_objfile by
1399 !objfile_has_partial_symbols. New comment.
1400 * objfiles.c (objfile_has_partial_symbols): Call HAS_SYMBOLS if
1401 SYM_READ_PSYMBOLS is not present. Extend the comment.
1402 * symfile.h (struct sym_fns): Extend the sym_read_psymbols comment.
1404 2011-04-25 Jan Kratochvil <jan.kratochvil@redhat.com>
1406 * defs.h (ENUM_BITFIELD): Remove.
1408 2011-04-24 Jan Kratochvil <jan.kratochvil@redhat.com>
1409 Eli Zaretskii <eliz@gnu.org>
1411 * NEWS: Document the new gdbserver --once option.
1413 2011-04-21 Jie Zhang <jzhang918@gmail.com>
1415 * MAINTAINERS: Update my email address.
1417 2011-04-21 Pierre Muller <muller@ics.u-strasbg.fr>
1419 * gdb_wchar.h (USE_INTERMEDIATE_ENCODING_FUNCTION): New macro.
1420 (INTERMEDIATE_ENCODING): Change value to intermediate_encoding
1421 function call if __STDC_ISO_10646__ macro is defined.
1422 (intermediate_encoding): New prototype.
1423 * charset.c (your_gdb_wchar_t_is_bogus): New extern test variable
1424 to generate compile time error for unsupported gdb_wchar_t size.
1425 (ENDIAN_SUFFIX): New macro.
1426 (intermediate_encoding): New function.
1428 2011-04-20 Jan Kratochvil <jan.kratochvil@redhat.com>
1430 * ada-lang.c (struct add_partial_datum): Update the comment for
1431 expand_partial_symbol_name.
1432 (ada_add_partial_symbol_completions): Rename to ...
1433 (ada_expand_partial_symbol_name): ... here, change return type, update
1434 function comment, call symbol_completion_match instead of
1435 symbol_completion_add.
1436 (ada_make_symbol_completion_list): Use now expand_partial_symbol_names
1437 and ada_expand_partial_symbol_name.
1438 * dwarf2read.c (dw2_expand_symtabs_matching): Support NULL
1440 (dw2_map_symbol_names): Remove.
1441 (dwarf2_gdb_index_functions): Unlist dw2_map_symbol_names.
1442 * psymtab.c (map_symbol_names_psymtab): Remove.
1443 (expand_symtabs_matching_via_partial): Support NULL FILE_MATCHER.
1444 Support KIND == ALL_DOMAIN. Exchange the NAME_MATCHER and KIND check
1446 (psym_functions): Unlist map_symbol_names_psymtab.
1447 (map_partial_symbol_names): Rename to ...
1448 (expand_partial_symbol_names): ... here, change the FUN type, call
1449 expand_symtabs_matching with ALL_DOMAIN and NULL FILE_MATCHER now.
1450 * psymtab.h (map_partial_symbol_names): Rename to ...
1451 (expand_partial_symbol_names): ... here, change the FUN type.
1452 * symfile.h (struct quick_symbol_functions): Update the description of
1453 expand_symtabs_matching. Remove map_symbol_names.
1454 * symtab.c (search_symbols): Add ALL_DOMAIN to the function comment.
1455 (struct add_name_data): Update the comment for
1456 expand_partial_symbol_name.
1457 (add_partial_symbol_name): Rename to ...
1458 (expand_partial_symbol_name): ... here. Replace
1459 completion_list_add_name call by strncmp.
1460 (default_make_symbol_completion_list_break_on): Use now
1461 expand_partial_symbol_names and expand_partial_symbol_name.
1462 * symtab.h (enum search_domain): New element ALL_DOMAIN.
1464 2011-04-20 Tom Tromey <tromey@redhat.com>
1466 * dwarf2read.c (save_gdb_index_command): Replace format
1467 documentation with a pointer to the manual.
1469 2011-04-20 Pedro Alves <pedro@codesourcery.com>
1471 * regcache.c: Include remote.h.
1472 (enum regcache_dump_what) <regcache_dump_remote>: New enum value.
1473 (regcache_dump): Handle regcache_dump_remote.
1474 (maintenance_print_remote_registers): New function.
1475 (_initialize_regcache): Install "maint print remote-registers"
1477 * remote.c (map_regcache_remote_table): New function, factored out
1479 (init_remote_state): ... here.
1480 (remote_register_number_and_offset): New.
1481 * remote.h (remote_register_number_and_offset): Declare.
1483 2011-04-20 Pedro Alves <pedro@codesourcery.com>
1485 * regcache.c (get_thread_arch_regcache): If creating a regcache for
1486 null_ptid, assume and allow a NULL address space, instead of
1487 asking the target for the ptid's address space.
1488 * infrun.c (ptid_is_pid): Remove assertion.
1490 2011-04-19 Tom Tromey <tromey@redhat.com>
1492 * windows-tdep.c (windows_xfer_shared_library):
1493 * windows-nat.c (get_module_name, windows_make_so):
1494 * v850-tdep.c (v850_handle_pushm):
1495 * utils.c (null_cleanup, gdb_realpath):
1496 * ui-out.c (get_next_header):
1497 * tracepoint.c (clear_traceframe_info):
1498 * symtab.c (lookup_symtab):
1499 * serial.h (struct serial_ops):
1500 * mipsread.c (read_alphacoff_dynamic_symtab):
1501 * infcmd.c (print_return_value):
1502 * ia64-linux-tdep.c (ia64_linux_sigcontext_register_address):
1503 * f-exp.y (parse_number):
1504 * exceptions.c (catch_exceptions):
1505 * dummy-frame.c (dummy_frame_this_id):
1506 * defs.h (struct cleanup):
1507 * breakpoint.c (disable_breakpoints_in_unloaded_shlib):
1508 * arm-tdep.c (arm_push_dummy_call):
1509 * amd64-tdep.h (amd64_collect_xsave):
1510 * amd64-tdep.c (amd64_collect_xsave):
1511 * alpha-tdep.c (alpha_heuristic_frame_unwind_cache):
1512 * README (typing): Remove duplicate words.
1513 * cli/cli-decode.c (lookup_cmd_composition): Add comma.
1514 * infrun.c (siginfo_value_read): Fix typo.
1515 * solib-frv.c (frv_fdpic_find_global_pointer): Likewise.
1516 * top.c (source_line_number): Add comma.
1518 2011-04-19 Marc Khouzam <marc.khouzam@ericsson.com>
1520 * thread.c (any_live_thread_of_process): Prioritize threads
1521 that are not executing.
1522 * gdbthread.h (any_live_thread_of_process): Update comment
1523 as per above change.
1525 2011-04-19 Andreas Schwab <schwab@linux-m68k.org>
1527 * xcoffread.c (process_xcoff_symbol): Remove useless cast.
1528 (scan_xcoff_symtab): Likewise.
1530 2011-04-19 Pierre Muller <muller@ics.u-strasbg.fr>
1532 * xcoffread.c (process_xcoff_symbol): ARI fix: Avoid assignment
1535 2011-04-19 Pierre Muller <muller@ics.u-strasbg.fr>
1536 Pedro Alves <pedro@codesourcery.com>
1538 * xstormy16-tdep.c (xstormy16_push_dummy_call): Add local
1539 variables to simplify code and avoid == operator at end of
1540 line as this is against GNU coding standards.
1542 2011-04-19 Pierre Muller <muller@ics.u-strasbg.fr>
1544 * solib-svr4.c (svr4_keep_data_in_core): Rename local variable
1545 lm_name to name_lm to avoid conflict with lm_name function.
1547 2011-04-19 Pierre Muller <muller@ics.u-strasbg.fr>
1549 ARI fixes: Use only lowercase function name for static functions.
1550 * nto-tdep.c (LM_ADDR): Rename to...
1551 (lm_addr): New function name.
1552 (nto_relocate_section_addresses): Adapt to change above.
1553 * solib-sunos.c (LM_ADDR): Rename to...
1554 (lm_addr): New function name.
1555 (LM_NEXT): Rename to...
1556 (lm_next): New function name.
1557 (sunos_current_sos, sunos_relocate_section_addresses): Adapt to
1558 function name changes above.
1559 * solib-svr4.c (LM_ADDR_FROM_LINK_MAP): Rename to...
1560 (lm_addr_from_link_map): New function name.
1561 (HAS_LM_DYNAMIC_FROM_LINK_MAP): Rename to...
1562 (has_lm_dynamic_from_link_map): New function name.
1563 (LM_DYNAMIC_FROM_LINK_MAP): Rename to...
1564 (lm_dynamic_from_link_map): New function name.
1565 (LM_ADDR_CHECK): Rename to...
1566 (lm_addr_check): New function name.
1567 (LM_NEXT): Rename to...
1568 (lm_next): New function name.
1569 (LM_PREV): Rename to...
1570 (lm_prev): New function name.
1571 (LM_NAME): Rename to...
1572 (lm_name): New function name.
1573 (IGNORE_FIRST_LINK_MAP_ENTRY): Rename to...
1574 (ignore_first_link_map_entry): New function name.
1575 (svr4_keep_data_in_core): Adapt to function name changes above.
1576 (svr4_current_sos): Likewise.
1577 (enable_break): Likewise.
1578 (svr4_relocate_section_addresses): Likewise.
1580 2011-04-19 Pierre Muller <muller@ics.u-strasbg.fr>
1583 * xtensa-tdep.c (xtensa_register_type): Use xstrprintf instead of
1584 sprintf. Simplify code and avoid loosing memory.
1585 (xtensa_register_reggroup_p): Extract assignment out of IF clause.
1586 (call0_frame_cache): Remove && operator from end of line.
1588 2011-04-17 Jan Kratochvil <jan.kratochvil@redhat.com>
1590 Fix libraries displacement if they change whether they were prelinked.
1591 * solib-svr4.c (LM_ADDR_CHECK): Set L_ADDR even if the DYNAMIC pointer
1592 does not match. Comment why.
1594 2011-04-17 Jan Kratochvil <jan.kratochvil@redhat.com>
1596 * corelow.c: Include wrapper.h.
1597 (core_open): Call now gdb_target_find_new_threads.
1598 * wrapper.c: Include target.h.
1599 (gdb_target_find_new_threads): New.
1600 * wrapper.h (gdb_target_find_new_threads): New declaration.
1602 2011-04-17 Jan Kratochvil <jan.kratochvil@redhat.com>
1604 * linux-thread-db.c (find_new_threads_callback): Exit on zero TI_TID
1605 even if !TARGET_HAS_EXECUTION.
1607 2011-04-17 Jan Kratochvil <jan.kratochvil@redhat.com>
1609 Fix convert_code_addr_to_desc_addr for ppc64 files after eu-strip.
1610 * elfread.c (elf_symfile_read): New variable synth_abfd, pass it to
1611 bfd_get_synthetic_symtab.
1612 * jit.c (jit_register_code): Pass NULL to the new parameter parent.
1613 * machoread.c (macho_add_oso_symfile): Pass main_objfile to the new
1614 parameter parent, remove the call to add_separate_debug_objfile.
1615 * solib.c (solib_read_symbols): Pass NULL to the new parameter parent.
1616 * symfile-mem.c (symbol_file_add_from_memory): Likewise.
1617 * symfile.c (symbol_file_add_with_addrs_or_offsets): New parameter
1618 parent, new comment for it, call add_separate_debug_objfile for it.
1619 (symbol_file_add_separate): Pass objfile as the parameter parent,
1620 remove the call to add_separate_debug_objfile.
1621 (symbol_file_add_from_bfd): New parameter parent, pass it.
1622 (symbol_file_add): Pass NULL to the new parameter parent.
1623 * symfile.h (symbol_file_add_from_bfd): New parameter parent.
1625 2011-04-17 Jan Kratochvil <jan.kratochvil@redhat.com>
1627 * elfread.c (elf_symtab_read): Do not ignore .L symbols if they are
1630 2011-04-17 Jan Kratochvil <jan.kratochvil@redhat.com>
1632 Fix Python access to inlined frames.
1633 * python/py-frame.c (frapy_read_var): Find BLOCK using get_frame_block.
1634 * python/py-symbol.c (gdbpy_lookup_symbol): Likewise.
1636 2011-04-15 Tom Tromey <tromey@redhat.com>
1638 * dwarf2read.c (add_index_entry): Use VEC_last, not VEC_length.
1640 2011-04-15 Gary Benson <gbenson@redhat.com>
1642 * MAINTAINERS: Add myself to write-after-approval section.
1644 2011-04-14 Mike Frysinger <vapier@gentoo.org>
1646 * remote-sim.c (sim_command_completer): New function.
1647 (_initialize_remote_sim): Set completer to sim_command_completer.
1649 2011-04-13 Thiago Jung Bauermann <bauerman@br.ibm.com>
1651 * breakpoint.c (print_exception_catchpoint): Rename to ...
1652 (print_it_exception_catchpoint): ... this.
1653 (gnu_v3_exception_catchpoint_ops): Update with new name
1654 for print_it_exception_catchpoint.
1656 2011-04-13 Edjunior Machado <emachado@linux.vnet.ibm.com>
1658 * MAINTAINERS: Add myself for write after approval privileges.
1660 2011-04-13 Marek Polacek <mpolacek@redhat.com>
1662 * MAINTAINERS: Add myself as a write-after-approval maintainer.
1664 2011-04-13 Thiago Jung Bauermann <bauerman@br.ibm.com>
1666 * breakpoint.c (watch_command_1): Remove colon from exp_string.
1668 2011-04-13 Thiago Jung Bauermann <bauerman@br.ibm.com>
1670 * breakpoint.c (save_breakpoints): Verify whether
1671 breakpoint_ops.print_recreate is defined before calling it.
1673 2011-04-11 Gary Benson <gbenson@redhat.com>
1675 Fix failure with --enable-maintainer-mode.
1676 * Makefile.in (aclocal_m4_deps): Updated gnulib dependencies.
1678 2011-04-09 Jan Kratochvil <jan.kratochvil@redhat.com>
1681 * symtab.c (search_symbols): Reorder the KIND description in the
1682 function comment. Remove the unused 4th element of types, types2,
1683 types3 and types4. New gdb_assert on KIND.
1684 (symtab_symbol_info): Remove the unused 4th element of classnames.
1685 New gdb_assert on KIND.
1686 * symtab.h (enum search_domain): New warning in the enum comment.
1687 Assign numbers to the elements VARIABLES_DOMAIN, FUNCTIONS_DOMAIN and
1690 2011-04-09 Jan Kratochvil <jan.kratochvil@redhat.com>
1692 Fix crash of gdb save-index on a STABS file.
1693 * dwarf2read.c (write_psymtabs_to_index): Return also on no
1696 2011-04-09 Jan Kratochvil <jan.kratochvil@redhat.com>
1698 Fix DW_AT_accessibility compatibility with gcc-4.6+.
1699 * dwarf2read.c: Include ctype.h.
1700 (producer_is_gxx_lt_4_6, dwarf2_default_access_attribute): New
1702 (dwarf2_add_field): Fix new_field->accessibility by calling
1703 dwarf2_default_access_attribute. Restructure setting accessibility
1705 (dwarf2_add_member_fn): New variable accessibility. Fix fnp
1706 is_private and is_protected by calling
1707 dwarf2_default_access_attribute.
1709 2011-04-08 Kevin Buettner <kevinb@redhat.com>
1711 * rx-tdep.c (rx_frame_unwind): Add default_frame_unwind_stop_reason
1712 to the initialization.
1714 2011-04-08 Steve Ellcey <sje@cup.hp.com>
1716 * Add default_frame_unwind_stop_reason value to libunwind_frame_unwind
1719 2011-04-07 Pierre Muller <muller@ics.u-strasbg.fr>
1721 Remove support for old Cygwin 1.5 versions.
1722 * remote-fileio.c: Remove macros used to emulate new cygwin_conv_path
1723 function on old Cygwin version.
1724 * windows-nat.c: Remove cygwin version check and always define
1725 __USEWIDE for Cygwin compilation.
1727 2011-04-07 Yao Qi <yao@codesourcery.com>
1729 * arm-linux-tdep.c (arm_linux_copy_svc): Remove parameters INSN
1731 * arm-tdep.c (cleanup_svc): Handle variable instruction size.
1732 (arm_copy_svc): Remove parameters INSN and TO.
1733 (decode_svc_copro): Update caller.
1734 * arm-tdep.h (struct displaced_step_closure): Remove parameters
1735 from function pointer `copy_svc_os'.
1737 2011-04-07 Yao Qi <yao@codesourcery.com>
1739 * arm-tdep.c (cleanup_branch): Set a correct return address in
1740 LR for ARM and Thumb.
1742 2011-04-06 Jan Kratochvil <jan.kratochvil@redhat.com>
1745 * dictionary.c (dict_hash): Use SYMBOL_HASH_NEXT.
1746 * dwarf2read.c (mapped_index_string_hash): Refer to SYMBOL_HASH_NEXT
1747 in the function comment, a new note on values compatibility.
1748 * minsyms.c (msymbol_hash_iw, msymbol_hash): Use SYMBOL_HASH_NEXT.
1749 * symtab.h (SYMBOL_HASH_NEXT): New.
1751 2011-04-06 Thiago Jung Bauermann <bauerman@br.ibm.com>
1753 * ppc-linux-nat.c (check_condition): Add len output parameter.
1754 Set it based on the memory region referenced in the condition
1755 expression. Update all callers.
1757 2011-04-06 Jan Kratochvil <jan.kratochvil@redhat.com>
1759 Fix crash regression on systems featuring .gdb_index.
1760 * objfiles.c (free_objfile): Move the
1761 forget_cached_source_info_for_objfile call earlier. Comment it.
1762 Extend the comment for objfile_free_data.
1764 2011-04-06 Jan Kratochvil <jan.kratochvil@redhat.com>
1766 Fix regression of displaying the debug format.
1767 * buildsym.c (end_symtab): Set symtab's debugformat and producer from
1770 2011-04-04 Tom Tromey <tromey@redhat.com>
1772 * cli/cli-interp.c (struct captured_execute_command_args):
1774 (do_captured_execute_command): Remove.
1775 (safe_execute_command): Use TRY_CATCH.
1776 * cli/cli-script.c (struct wrapped_read_command_file_args):
1778 (wrapped_read_command_file): Remove.
1779 (script_from_file): Use TRY_CATCH.
1780 * exceptions.c (catch_exception): Remove.
1781 * exceptions.h (catch_exception): Remove.
1782 (deprecated_throw_reason): Update comment.
1783 * mi/mi-main.c (captured_mi_execute_command): Change 'data'
1784 argument to 'context'.
1785 (mi_execute_command): Use TRY_CATCH.
1786 * remote.c (struct start_remote_args): Remove.
1787 (remote_start_remote): Update; change arguments.
1788 (remote_open_1): Use TRY_CATCH.
1790 2011-04-04 Tom Tromey <tromey@redhat.com>
1792 * tracepoint.c (scope_info): Update.
1793 * symtab.c (decode_line_spec): Update.
1794 * python/python.c (gdbpy_decode_line): Update.
1795 * linespec.h (decode_line_1): Update.
1796 * linespec.c (decode_line_1): Remove 'not_found_ptr' argument.
1797 (decode_compound, find_method, symtab_from_filename)
1798 (decode_variable): Likewise.
1799 * cli/cli-cmds.c (edit_command): Update.
1800 (list_command): Update.
1801 * breakpoint.c (parse_breakpoint_sals): Remove 'not_found_ptr'
1803 (create_breakpoint): Update.
1804 (until_break_command): Update.
1805 (addr_string_to_sals): Update.
1806 (decode_line_spec_1): Update.
1808 2011-04-04 Tom Tromey <tromey@redhat.com>
1810 * breakpoint.c (struct captured_parse_breakpoint_args): Remove.
1811 (do_captured_parse_breakpoint): Remove.
1812 (create_breakpoint): `e' is now volatile. Remove `parse_args'.
1813 Use TRY_CATCH directly.
1815 2011-04-04 Tom Tromey <tromey@redhat.com>
1817 * symtab.h (free_symtab): Remove.
1818 (forget_cached_source_info_for_objfile): Declare.
1819 * symmisc.c (free_symtab): Remove.
1820 * source.c (forget_cached_source_info_for_objfile): New function.
1821 (forget_cached_source_info): Use it.
1822 * objfiles.c (free_objfile): Simplify check before calling
1823 clear_current_source_symtab_and_line. Call
1824 forget_cached_source_info_for_objfile.
1826 2011-04-04 Tom Tromey <tromey@redhat.com>
1828 * mdebugread.c (psymtab_to_symtab_1): Copy linetable to obstack.
1829 (new_symtab): Don't set `free_code' on symtab.
1830 (new_linetable): Properly handle size==0.
1831 * symtab.h (struct symtab) <free_code, free_func>: Remove.
1832 * symmisc.c (free_symtab): Don't free the linetable. Don't call
1834 * jv-lang.c (struct jv_per_objfile_data): New.
1835 (jv_per_objfile_free): Free the data.
1836 (get_dynamics_objfile): Allocate a jv_per_objfile_data.
1837 (get_java_class_symtab): Set the `dict' field on the
1838 jv_per_objfile_data.
1839 (free_class_block): Remove.
1840 * buildsym.c (end_symtab): Don't set `free_code' or `free_func' on
1843 2011-04-04 Tom Tromey <tromey@redhat.com>
1845 * symfile.c (reread_symbols): Update.
1846 * objfiles.h (struct objfile) <cp_namespace_symtab>: Remove
1848 * objfiles.c (allocate_objfile): Update.
1849 * cp-support.h (cp_check_possible_namespace_symbols): Don't
1851 * cp-namespace.c (lookup_symbol_file): Don't call
1852 lookup_possible_namespace_symbol.
1853 (initialize_namespace_symtab, get_possible_namespace_block)
1854 (free_namespace_block, cp_check_possible_namespace_symbols)
1855 (check_possible_namespace_symbols_loop)
1856 (check_one_possible_namespace_symbol)
1857 (lookup_possible_namespace_symbol): Remove.
1858 (maintenance_cplus_namespace): Replace with notice.
1859 (_initialize_cp_namespace): Deprecate `maint cplus namespace'.
1861 2011-04-04 Tom Tromey <tromey@redhat.com>
1863 * xcoffread.c (read_xcoff_symtab): Make `debugfmt' const.
1864 * symtab.h (struct symtab) <producer, debugformat>: Now const.
1865 * symmisc.c (free_symtab): Don't free debugformat.
1866 * buildsym.h (struct subfile) <producer, debugformat>: Now const.
1867 (record_debugformat, record_producer): Document.
1868 * buildsym.c (end_symtab): Don't save debugformat and producer
1870 (end_symtab): Don't free debugformat and producer fields.
1871 (record_debugformat): Don't call xstrdup.
1872 (record_producer): Likewise.
1874 2011-04-04 Tom Tromey <tromey@redhat.com>
1876 * source.c (find_source_lines): Remove LSEEK_NOT_LINEAR code.
1877 (source_line_charpos, source_charpos_line): Remove.
1879 2011-04-04 Tom Tromey <tromey@redhat.com>
1881 * symtab.h (domain_enum): Split in two...
1882 (enum search_domain): New.
1883 (search_symbols): Update.
1884 * symtab.c (print_symbol_info, symtab_symbol_info): Remove
1885 redundant declarations.
1886 (search_symbols): Change 'kind' argument to search_domain.
1888 (print_symbol_info): Likewise.
1889 (symtab_symbol_info): Likewise.
1890 * symfile.h (struct quick_symbol_functions)
1891 <pre_expand_symtabs_matching>: Change type of 'kind' argument.
1892 <expand_symtabs_matching>: Likewise.
1893 * psymtab.c (pre_expand_symtabs_matching_psymtabs): Update.
1894 (expand_symtabs_matching_via_partial): Update.
1895 * dwarf2read.c (dw2_pre_expand_symtabs_matching): Update.
1896 (dw2_expand_symtabs_for_function): Update.
1897 * block.h: Moved anonymous enum...
1898 * defs.h (enum block_enum): ... here. Now named.
1900 2011-04-03 Joel Brobecker <brobecker@adacore.com>
1902 GDB 7.3 branch created (branch timestamp: 2011-04-01 01:00 UTC)
1903 * version.in: Bump version to 7.3.50.20110403-cvs.
1905 2011-04-03 Joel Brobecker <brobecker@adacore.com>
1907 * NEWS: Create a new section for the next release branch.
1908 Rename the section of the current branch, now that it has
1911 2011-04-01 Ulrich Weigand <ulrich.weigand@linaro.org>
1913 * arm-tdep.c (arm_gdbarch_init): Enfore correct register number
1914 for "fpscr" in target description.
1916 2011-04-01 Jan Kratochvil <jan.kratochvil@redhat.com>
1918 * dwarf2read.c (find_slot_in_mapped_hash): New variable back_to,
1919 initialize it. Delay HASH initialization. Strip the part after open
1920 parenthesis for languages with qualifiers. Call do_cleanups.
1922 2011-04-01 Tom Tromey <tromey@redhat.com>
1924 * utils.c (report_command_stats): Don't print `-' for negative
1927 2011-04-01 Eric Botcazou <ebotcazou@adacore.com>
1929 * ada-lang.c (ada_is_simple_array_type, ada_value_slice_from_ptr)
1930 (ada_value_slice, empty_array, to_fixed_array_type): Deal with
1933 2011-04-01 Joel Brobecker <brobecker@adacore.com>
1935 * breakpoint.h (bpdisp_text): Add declaration.
1936 * breakpoint.c (bpdisp_text): Make non-static.
1937 * ada-lang.c: #include "mi/mi-common.h".
1938 (print_it_exception): Rewrite to improve GDB/MI output.
1940 2011-04-01 Pedro Alves <pedro@codesourcery.com>
1942 * arm-tdep.h (struct address_space): Add forward declaration.
1944 2011-04-01 Ulrich Weigand <ulrich.weigand@linaro.org>
1946 * arm-tdep.h (arm_insert_single_step_breakpoint): Add prototype.
1947 * arm-tdep.c (arm_override_mode): New global.
1948 (arm_pc_is_thumb): Respect arm_override_mode. Remove single-step
1949 execution mode heuristics.
1950 (thumb_get_next_pc_raw): Remove INSERT_BKTP argument; always insert
1951 second single-step breakpoint if needed, using
1952 arm_insert_single_step_breakpoint.
1953 (arm_get_next_pc_raw): Remove INSERT_BKTP argument. Only handle
1954 ARM execution mode, do not call thumb_get_next_pc_raw.
1955 (arm_get_next_pc): Encode execution mode in return value. Call
1956 either arm_get_next_pc_raw or thumb_get_next_pc_raw.
1957 (arm_insert_single_step_breakpoint): New function.
1958 (arm_software_single_step): Call it.
1959 * arm-linux-tdep.c (arm_linux_sigreturn_return_addr): Add IS_THUMB
1960 argument to return execution mode of sigreturn target.
1961 (arm_linux_syscall_next_pc): Use it.
1962 (arm_linux_copy_svc): Update call.
1963 (arm_linux_software_single_step): Call
1964 arm_insert_single_step_breakpoint.
1966 2011-03-31 Jan Kratochvil <jan.kratochvil@redhat.com>
1968 * dwarf2read.c (dwarf2_read_index): Fix .gdb_index version number in
1971 2011-03-31 Tom Tromey <tromey@redhat.com>
1973 * varobj.c (update_dynamic_varobj_children): Properly handle
1974 errors from iterator.
1976 2011-03-31 Jan Kratochvil <jan.kratochvil@redhat.com>
1978 * dwarf2read.c (dwarf2_name): Initialize DEMANGLED. Avoid demangling
1979 struct linkage name twice.
1981 2011-03-31 Tom Tromey <tromey@redhat.com>
1983 * python/py-prettyprint.c (print_stack_unless_memory_error): Add
1984 missing ">" to message.
1986 2011-03-31 Tom Tromey <tromey@redhat.com>
1988 * varobj.c (instantiate_pretty_printer): Remove duplicate
1991 2011-03-31 Ulrich Weigand <ulrich.weigand@linaro.org>
1993 * i386-tdep.c (i386_frame_prev_register): Unwind SP from memory
1994 if neither saved value nor register available (e.g. signal frame).
1996 2011-03-31 Thiago Jung Bauermann <bauerman@br.ibm.com>
1998 * macroexp.c (expand): Avoid uninitialized variable
2001 2011-03-31 Thiago Jung Bauermann <bauerman@br.ibm.com>
2003 * breakpoint.c (break_range_command): Fix typo in comment.
2005 2011-03-31 Thiago Jung Bauermann <bauerman@br.ibm.com>
2006 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
2008 Implement support for PowerPC BookE ranged breakpoints.
2009 * NEWS: Mention support for ranged breakpoints on embedded PowerPC.
2010 * breakpoint.h (struct bp_target_info) <length>: New member
2012 (struct breakpoint_ops) <breakpoint_hit>: Take struct bp_location
2013 instead of struct breakpoint as argument, and also add ASPACE
2014 and BP_ADDR arguments. Update all callers.
2015 (struct breakpoint_ops) <print_one_detail>: New method.
2016 (struct breakpoint) <addr_string_range_end>: New member variable.
2017 * breakpoint.c (breakpoint_location_address_match): Add function
2019 (insert_bp_location): Set bl->target_info.length.
2020 (breakpoint_here_p): Call breakpoint_location_address_match.
2021 (moribund_breakpoint_here_p): Likewise.
2022 (regular_breakpoint_inserted_here_p): Likewise.
2023 (breakpoint_thread_match): Likewise.
2024 (bpstat_stop_status): Likewise.
2025 (bpstat_check_location): Move call to
2026 breakpoint_ops.breakpoint_hit to the top.
2027 (print_one_breakpoint_location): Call
2028 breakpoint_ops.print_one_detail if available.
2029 (breakpoint_address_match_range): New function.
2030 (breakpoint_location_address_match): Likewise.
2031 (breakpoint_locations_match): Compare the length field of the
2033 (hw_breakpoint_used_count): Count resources used by all locations
2034 in a breakpoint, and use breakpoint_ops.resources_needed if
2036 (breakpoint_hit_ranged_breakpoint): New function.
2037 (resources_needed_ranged_breakpoint): Likewise.
2038 (print_it_ranged_breakpoint): Likewise.
2039 (print_one_ranged_breakpoint): Likewise.
2040 (print_one_detail_ranged_breakpoint): Likewise.
2041 (print_mention_ranged_breakpoint): Likewise.
2042 (print_recreate_ranged_breakpoint): Likewise.
2043 (ranged_breakpoint_ops): New structure.
2044 (find_breakpoint_range_end): New function.
2045 (break_range_command): Likewise.
2046 (delete_breakpoint): Free addr_string_range_end.
2047 (update_breakpoint_locations): Add SALS_END argument. Update
2048 all callers. Calculate breakpoint length if a non-zero SALS_END
2049 is given. Call breakpoint_locations_match instead of
2050 breakpoint_address_match.
2051 (reset_breakpoint): Find SaL of the end of the range if B is a
2053 (_initialize_breakpoint): Register break-range command.
2054 * defs.h (print_core_address): Add function prototype.
2055 * ppc-linux-nat.c (ppc_linux_ranged_break_num_registers): New
2057 (ppc_linux_insert_hw_breakpoint): Support ranged breakpoints.
2058 (ppc_linux_remove_hw_breakpoint): Likewise.
2059 (_initialize_ppc_linux_nat): Initialize
2060 to_ranged_break_num_registers.
2061 * target.c (update_current_target): Add comment about
2062 to_ranged_break_num_registers.
2063 (target_ranged_break_num_registers): New function.
2064 * target.h (struct target_ops) <to_ranged_break_num_registers>:
2066 (target_ranged_break_num_registers): Add function prototype.
2067 * ui-out.c (ui_out_field_core_addr): Move address-printing logic to ...
2068 * utils.c (print_core_address): ... here.
2070 2011-03-31 Ulrich Weigand <uweigand@de.ibm.com>
2072 * breakpoint.c (addr_string_to_sals): Avoid uninitialized
2073 variable compiler warning.
2075 2011-03-30 Thiago Jung Bauermann <bauerman@br.ibm.com>
2077 * breakpoint.c (breakpoint_re_set_one): Factor out breakpoint-resetting
2079 (re_set_breakpoint): ... to here ...
2080 (addr_string_to_sals): ... and here.
2082 2011-03-29 Pierre Muller <muller@ics.u-strasbg.fr>
2084 * Makefile.in (SFILES): Add missing C sources.
2085 (HFILES_NO_SRCDIR): Remove gdbserver subdirectory headers.
2086 Add missing headers.
2088 2011-03-29 Mike Frysinger <vapier@gentoo.org>
2090 * .gitignore: New file.
2092 2011-03-29 Mike Frysinger <vapier@gentoo.org>
2094 * NEWS: Mention new cfi device simulation.
2096 2011-03-29 Tom Tromey <tromey@redhat.com>
2098 * dwarf2read.c (fixup_partial_die): Handle linkage name on
2099 otherwise anonymous types.
2100 (dwarf2_name): Likewise.
2101 * valops.c (value_struct_elt_for_reference): Refine artificial
2102 type logic. Call error if j==-1.
2104 2011-03-29 Andreas Tobler <andreast-list@fgznet.ch>
2106 Fix false GCC warning.
2107 * infcall.c (find_function_addr): Initialize funaddr.
2109 2011-03-29 Pierre Muller <muller@ics.u-strasbg.fr>
2111 Fix mingw compilation with --enable-targets=all.
2112 * remote-mips.c (gdb_usleep.h): Include header.
2113 (mips_enter_debug): Use gdb_usleep instead of sleep.
2115 2011-03-28 Jan Kratochvil <jan.kratochvil@redhat.com>
2117 Support resolution of STT_GNU_IFUNC via breakpoints.
2118 * breakpoint.c (print_it_typical): Support bp_gnu_ifunc_resolver and
2119 bp_gnu_ifunc_resolver_return.
2120 (bpstat_what): Rename parameter to bs_head, new variable bs, adjust
2121 the loop. Support bp_gnu_ifunc_resolver and
2122 bp_gnu_ifunc_resolver_return. New comment after the loop. New loop
2123 for bp_gnu_ifunc_resolver and bp_gnu_ifunc_resolver_return
2125 (bptype_string, print_one_breakpoint_location): Support
2126 bp_gnu_ifunc_resolver and bp_gnu_ifunc_resolver_return.
2127 (user_settable_breakpoint): Return true also for
2128 bp_gnu_ifunc_resolver.
2129 (allocate_bp_location): Support bp_gnu_ifunc_resolver and
2130 bp_gnu_ifunc_resolver_return.
2131 (set_breakpoint_location_function): New parameter explicit_loc,
2132 describe it. Call find_pc_partial_function_gnu_ifunc with new
2133 variable IS_GNU_IFUNC and adjust the address for STT_GNU_IFUNC if
2134 EXPLICIT_LOC is not set.
2135 (set_raw_breakpoint): Set EXPLICIT_LOC for
2136 set_breakpoint_location_function.
2137 (clone_momentary_breakpoint): Use true for EXPLICIT_LOC of
2138 set_breakpoint_location_function.
2139 (mention): Support bp_gnu_ifunc_resolver and
2140 bp_gnu_ifunc_resolver_return.
2141 (add_location_to_breakpoint): Set EXPLICIT_LOC for
2142 set_breakpoint_location_function.
2143 (update_breakpoint_locations): Remove static.
2144 (breakpoint_re_set_one): Support bp_gnu_ifunc_resolver and
2145 bp_gnu_ifunc_resolver_return.
2146 * breakpoint.h (enum bptype): New fields bp_gnu_ifunc_resolver and
2147 bp_gnu_ifunc_resolver_return.
2148 (update_breakpoint_locations): New declaration.
2149 * elfread.c: Include gdbthread.h and regcache.h.
2150 (elf_gnu_ifunc_resolver_stop, elf_gnu_ifunc_resolver_return_stop): New
2152 (elf_gnu_ifunc_fns): Install them.
2153 * minsyms.c (stub_gnu_ifunc_resolver_stop)
2154 (stub_gnu_ifunc_resolver_return_stop): New functions.
2155 (stub_gnu_ifunc_fns): Install them.
2156 * symtab.h (struct gnu_ifunc_fns): New fields gnu_ifunc_resolver_stop
2157 and gnu_ifunc_resolver_return_stop.
2158 (gnu_ifunc_resolver_stop, gnu_ifunc_resolver_return_stop): New.
2160 2011-03-28 Jan Kratochvil <jan.kratochvil@redhat.com>
2162 STT_GNU_IFUNC reader implementation.
2163 * elfread.c: Include gdbtypes.h, value.h and infcall.h.
2164 (SYMBOL_GOT_PLT_SUFFIX, elf_rel_plt_read)
2165 (elf_objfile_gnu_ifunc_cache_data, struct elf_gnu_ifunc_cache)
2166 (elf_gnu_ifunc_cache_hash, elf_gnu_ifunc_cache_eq)
2167 (elf_gnu_ifunc_record_cache, elf_gnu_ifunc_resolve_by_cache)
2168 (elf_gnu_ifunc_resolve_by_got, elf_gnu_ifunc_resolve_name)
2169 (elf_gnu_ifunc_resolve_addr): New.
2170 (elf_symfile_read): Call elf_rel_plt_read.
2171 (elf_gnu_ifunc_fns): New.
2172 (_initialize_elfread): Initialize elf_objfile_gnu_ifunc_cache_data.
2173 Install elf_gnu_ifunc_fns.
2174 * infcall.c (find_function_return_type): New function.
2175 (find_function_addr): Resolve TYPE_GNU_IFUNC functions, if possible.
2176 * minsyms.c (stub_gnu_ifunc_resolve_addr)
2177 (stub_gnu_ifunc_resolve_name): New functions.
2178 (stub_gnu_ifunc_fns, gnu_ifunc_fns_p): New variables.
2179 * symtab.h (struct gnu_ifunc_fns, gnu_ifunc_resolve_addr)
2180 (gnu_ifunc_resolve_name, gnu_ifunc_fns_p): New.
2182 2011-03-28 Jan Kratochvil <jan.kratochvil@redhat.com>
2184 Code cleanup for later STT_GNU_IFUNC support.
2185 * infcall.c (find_function_addr): Remove variable code, use explicit
2186 dereferences for it. Move VALUE_TYPE initialization later.
2188 2011-03-28 Jan Kratochvil <jan.kratochvil@redhat.com>
2190 GDB find_pc_partial_function support for STT_GNU_IFUNC.
2191 * blockframe.c (cache_pc_function_is_gnu_ifunc): New variable.
2192 (clear_pc_function_cache): Clear it.
2193 (find_pc_partial_function): Rename to ...
2194 (find_pc_partial_function_gnu_ifunc): ... this function. New
2195 parameter is_gnu_ifunc_p, describe it. Set *IS_GNU_IFUNC_P.
2196 (find_pc_partial_function): New wrapper for this function.
2197 * symtab.h (find_pc_partial_function_gnu_ifunc): New declaration.
2199 2011-03-28 Jan Kratochvil <jan.kratochvil@redhat.com>
2201 GDB internal type support for STT_GNU_IFUNC.
2202 * elfread.c (record_minimal_symbol): Support mst_text_gnu_ifunc.
2203 (elf_symtab_read): Set mst_text_gnu_ifunc for
2204 BSF_GNU_INDIRECT_FUNCTION.
2205 * eval.c (evaluate_subexp_standard): Support TYPE_GNU_IFUNC.
2206 * gdbtypes.c (init_type): Support TYPE_FLAG_GNU_IFUNC,
2207 builtin_func_func, nodebug_text_gnu_ifunc_symbol and
2208 nodebug_got_plt_symbol.
2209 * gdbtypes.h (enum type_flag_value): New entry TYPE_FLAG_GNU_IFUNC.
2210 (TYPE_GNU_IFUNC): New.
2211 (struct main_type): New field flag_gnu_ifunc.
2212 (struct builtin_type): New field builtin_func_func.
2213 (struct objfile_type): New fields nodebug_text_gnu_ifunc_symbol and
2214 nodebug_got_plt_symbol.
2215 * minsyms.c (lookup_minimal_symbol_text): Support mst_text_gnu_ifunc.
2216 (in_gnu_ifunc_stub): New.
2217 (prim_record_minimal_symbol, find_solib_trampoline_target): Support
2219 * parse.c (write_exp_msymbol): New variable ifunc_msym. Detect and
2220 support mst_text_gnu_ifunc. Support mst_slot_got_plt.
2221 * solib-svr4.c (svr4_in_dynsym_resolve_code): Return true also for
2223 * symmisc.c (dump_msymbols): Support mst_text_gnu_ifunc.
2224 * symtab.c (search_symbols): Likewise.
2225 * symtab.h (enum minimal_symbol_type): New fields mst_text_gnu_ifunc
2226 and mst_slot_got_plt.
2227 (in_gnu_ifunc_stub): New declaration.
2229 2011-03-28 Jan Kratochvil <jan.kratochvil@redhat.com>
2231 Support a ring of related breakpoints.
2232 * breakpoint.c (watchpoint_del_at_next_stop): New, move here code from
2233 other functions, add gdb_assert.
2234 (update_watchpoint, watchpoint_check): Add gdb_assert. Use
2235 watchpoint_del_at_next_stop.
2236 (bpstat_check_watchpoint): Use watchpoint_del_at_next_stop.
2237 (bpstat_stop_status): Handle ring in related_breakpoint.
2238 (set_raw_breakpoint_without_location): Initialize ring in
2240 (delete_breakpoint): Handle ring in related_breakpoint, use
2241 watchpoint_del_at_next_stop.
2242 (map_breakpoint_numbers): Handle ring in related_breakpoint.
2244 2011-03-28 Tom Tromey <tromey@redhat.com>
2247 * dwarf2read.c (prepare_one_comp_unit): Don't call set_cu_language
2248 with `language_minimal'.
2250 2011-03-25 Ulrich Weigand <ulrich.weigand@linaro.org>
2252 * arm-tdep.c (arm_elf_make_msymbol_special): Use ARM_SYM_BRANCH_TYPE
2253 instead of checking for STT_ARM_TFUNC symbol type.
2255 2011-03-25 Tom Tromey <tromey@redhat.com>
2257 * linespec.c (symbol_found): Restore line-based result for
2258 non-LOC_LABEL symbols.
2260 2011-03-25 Kai Tietz <ktietz@redhat.com>
2262 * tui/tui-source.c (tui_set_source_content): Use filename_cmp
2263 instead of strcmp for comparison.
2264 (tui_source_is_displayed): Likewise.
2265 * tui/tui-winsource.c (tui_update_breakpoint_info): Likewise.
2267 2011-03-24 Mark Wielaard <mjw@redhat.com>
2269 * dwarf2read.c (lookup_signatured_type): Use DW_FORM_ref_sig8 in
2271 (skip_one_die): Use DW_FORM_ref_sig8, not DW_FORM_sig8.
2272 (find_partial_die_in_comp_unit): Likewise in comment.
2273 (read_attribute_value): Likewise.
2274 (lookup_die_type): Likewise.
2275 (dwarf_form_name): Likewise.
2276 (dump_die_shallow): Likewise.
2277 (follow_die_ref_or_sig): Likewise.
2279 2011-03-24 Tom Tromey <tromey@redhat.com>
2281 PR breakpoints/11816:
2282 * linespec.c (decode_line_1): Parse `function:label' linespecs.
2283 (decode_compound): Update.
2284 (find_function_symbol): New function.
2285 (decode_dollar): Update.
2286 (decode_label): Add 'function_symbol' parameter. Handle
2287 function-relative labels.
2288 (decode_variable): Update.
2289 (symbol_found): Add 'function_symbol' parameter. Use label's PC,
2290 not its line. Set `special_display' and canonical name for
2293 2011-03-24 Tom Tromey <tromey@redhat.com>
2295 * linespec.h (struct linespec_result) <special_display>: New
2297 * breakpoint.h (struct breakpoint) <display_canonical>: New
2299 * breakpoint.c (print_breakpoint_location): Respect
2301 (create_breakpoint_sal): Add 'display_canonical' parameter.
2302 (create_breakpoints_sal): Update.
2303 (create_breakpoint): Update.
2305 2011-03-24 Tom Tromey <tromey@redhat.com>
2307 * symtab.c (decode_line_spec): Update.
2308 * linespec.c (build_canonical_line_spec): Change type of
2310 (decode_line_2, decode_line_1, decode_objc, decode_compound)
2311 (find_method, decode_all_digits, decode_dollar, decode_label)
2312 (symbol_found): Likewise.
2313 (init_linespec_result): New function.
2314 * breakpoint.c (struct captured_parse_breakpoint_args)
2315 <canonical_p>: New field, replaces addr_string_p.
2316 (create_breakpoints_sal): Add 'canonical' parameter, replacing
2318 (parse_breakpoint_sals): Likewise.
2319 (do_captured_parse_breakpoint): Update.
2320 (create_breakpoint): Use struct linespec_result.
2321 (until_break_command): Update.
2322 (breakpoint_re_set_one): Update.
2323 (decode_line_spec_1): Update.
2324 * linespec.h (struct linespec_result): New.
2325 (init_linespec_result): Declare.
2327 2011-03-23 Pedro Alves <pedro@codesourcery.com>
2329 * regcache.c (regcache_raw_read): If the target didn't supply a
2330 given raw register, mark it as unavailable.
2332 2011-03-23 Kai Tietz <ktietz@redhat.com>
2334 * breakpoint.c (clear_command): Use filename_cmp
2335 instead of strcmp for comparison.
2336 * buildsym.c (watch_main_source_file_lossage): Likewise.
2337 (patch_subfile_names): Use IS_DIR_SEPARATOR instead of
2338 checking just for slash.
2339 * dbxread.c (read_dbx_symtab): Use lbasename instead of
2340 strrchr and filename_cmp instead of strcmp for filenames.
2341 (add_old_header_file): Use filename_cmp
2342 instead of strcmp for comparison.
2343 * exec.c (exec_set_section_address): Likewise.
2344 * macrotab.c (macro_lookup_inclusion): Likewise.
2345 (macro_lookup_inclusion): Likewise.
2346 * elfread.c (_initialize_elfread): Likewise.
2347 (elfstab_offset_sections): Likewise.
2348 (elfstab_offset_sections): Use lbasename instead of
2350 * mdebugread.c (parse_partial_symbols): Likewise.
2351 (arse_partial_symbols): Use filename_(n)cmp instead of
2352 str(n)cmp for comparison.
2353 * minsyms.c (lookup_minimal_symbol): Likewise.
2354 * psymtab.c (read_psymtabs_with_filename): Likewise.
2355 * solib.c (solib_read_symbols): Likewise.
2356 (reload_shared_libraries_1): Likewise.
2357 * symmisc.c (maintenance_print_symbols): Likewise.
2358 * symfile.c (separate_debug_file_exists): Likewise.
2359 (reread_symbols): Likewise.
2360 (find_separate_debug_file_by_debuglink): Likewise.
2361 * remote-fileio.c (remote_fileio_func_rename): Likewise.
2362 * source.c (add_path): Likewise.
2363 * symtab.c (filename_seen): Likewise.
2364 (file_matches): Likewise.
2365 (print_symbol_info): Likewise.
2366 (maybe_add_partial_symtab_filename): Likewise.
2367 (make_source_files_completion_list): Likewise.
2368 * xml-syscall.c (init_sysinfo): Likewise.
2369 * windows-nat.c (_initialize_check_for_gdb_ini): Use
2370 IS_DIR_SEPARATOR for checking for trailing path separator.
2372 2011-03-22 Jan Kratochvil <jan.kratochvil@redhat.com>
2374 * dwarf2expr.c (execute_stack_op): Handle DW_OP_GNU_entry_value. New
2375 label abort_expression.
2376 * dwarf2loc.c (dwarf2_evaluate_loc_desc_full): Handle
2377 DWARF_VALUE_OPTIMIZED_OUT.
2379 2011-03-22 Jan Kratochvil <jan.kratochvil@redhat.com>
2382 * c-typeprint.c (c_type_print_args): Change parameter show_artificial
2383 to linkage_name. Invert its value. Update the function comment.
2384 (c_type_print_varspec_suffix): Invert it at the caller.
2385 * dwarf2read.c (dwarf2_compute_name): Invert it at the caller.
2387 2011-03-22 Pedro Alves <pedro@codesourcery.com>
2389 * infcmd.c (post_create_inferior): Ignore NOT_AVAILABLE_ERROR
2390 errors when reading the `stop_pc'.
2391 * printcmd.c (pc_prefix): Use get_frame_pc_if_available instead of
2394 2011-03-22 Phil Muldoon <pmuldoon@redhat.com>
2396 * NEWS: Document gdb.Write stream keyword.
2398 2011-03-22 Jan Kratochvil <jan.kratochvil@redhat.com>
2401 2011-03-21 Jan Kratochvil <jan.kratochvil@redhat.com>
2402 * dwarf2read.c (producer_is_gxx_lt_4_6): New function.
2403 (dwarf2_add_field): Fix new_field->accessibility for
2404 cu->header.version >= 3 while verifying also producer_is_gxx_lt_4_6.
2406 2011-03-22 Phil Muldoon <pmuldoon@redhat.com>
2410 * python/py-function.c (fnpy_call): Treat GdbErrors differently to
2411 other error classes. Do not print stack trace.
2413 2011-03-21 Jan Kratochvil <jan.kratochvil@redhat.com>
2415 * dwarf2read.c (producer_is_gxx_lt_4_6): New function.
2416 (dwarf2_add_field): Fix new_field->accessibility for
2417 cu->header.version >= 3 while verifying also producer_is_gxx_lt_4_6.
2419 2011-03-21 Ulrich Weigand <ulrich.weigand@linaro.org>
2421 * arm-tdep.c (arm_analyze_prologue): Do not abort parsing when
2422 encountering a load via a non-SP register.
2424 2011-03-21 Ulrich Weigand <uweigand@de.ibm.com>
2426 * tramp-frame.c (tramp_frame_prepend_unwinder): Set stop_reason
2427 field in returned unwinder.
2429 2012-03-21 Jan Kratochvil <jan.kratochvil@redhat.com>
2431 * ada-lang.c (replace_operator_with_call): Copy also GDBARCH.
2433 2012-03-21 Joel Brobecker <brobecker@adacore.com>
2435 * ada-lang.c (replace_operator_with_call): Use xzalloc instead
2438 2012-03-18 Pedro Alves <pedro@codesourcery.com>
2440 * frame.c (frame_unwind_register): Throw an error if unwinding the
2442 * get_prev_frame_1 (get_prev_frame_1): Ask the unwinder if there's
2443 an unwind stop reason.
2444 (frame_stop_reason_string): Handle UNWIND_UNAVAILABLE.
2445 * frame.h (enum unwind_stop_reason) <UNWIND_OUTERMOST,
2446 UNWIND_UNAVAILABLE>: New.
2447 * inline-frame.c (inline_frame_unwind): Install
2448 default_frame_unwind_stop_reason.
2449 * frame-unwind.c: Include "exceptions.h".
2450 (frame_unwind_find_by_frame): Swallow NOT_AVAILABLE_ERROR errors.
2451 (default_frame_unwind_stop_reason): New.
2452 * frame-unwind.h (frame_unwind_stop_reason_ftype): New typedef.
2453 (default_frame_unwind_stop_reason): Declare.
2454 (struct frame_unwind) <stop_reason>: New function pointer.
2456 * dummy-frame.c: Install default_frame_unwind_stop_reason.
2457 * dwarf2-frame.c: Include exceptions.h.
2458 (struct dwarf2_frame_cache) <unavailable_retaddr>: New field.
2459 (dwarf2_frame_cache): Swallow NOT_AVAILABLE_ERROR errors when
2460 computing the CFA. If such an error was thrown, set
2461 unavailable_retaddr.
2462 (dwarf2_frame_unwind_stop_reason): New.
2463 (dwarf2_frame_this_id): Don't build a frame id if the CFA was
2465 (dwarf2_frame_unwind): Install dwarf2_frame_unwind_stop_reason.
2466 (dwarf2_signal_frame_unwind): Ditto.
2468 * amd64-tdep.c: Include "exceptions.h".
2469 (struct amd64_frame_cache): New field "base_p".
2470 (amd64_init_frame_cache): Clear it.
2471 (amd64_frame_cache_1): New, factored out from amd64_frame_cache.
2472 Avoid reading registers with functions that throw if the register
2473 is not necessary to compute the frame base.
2474 (amd64_frame_cache): Reimplement wrapping amd64_frame_cache_1, and
2475 swallowing NOT_AVAILABLE_ERROR.
2476 (amd64_frame_unwind_stop_reason): New.
2477 (amd64_frame_this_id): Don't build a frame id if the frame base
2479 (amd64_frame_unwind): Install amd64_frame_unwind_stop_reason.
2480 (amd64_sigtramp_frame_cache): Swallow NOT_AVAILABLE_ERROR, and set
2481 base_p if the frame base was computable.
2482 (amd64_sigtramp_frame_unwind_stop_reason): New.
2483 (amd64_sigtramp_frame_this_id): Don't build a frame id if the
2484 frame base was unavailable.
2485 (amd64_sigtramp_frame_unwind): Install
2486 amd64_sigtramp_frame_unwind_stop_reason.
2487 (amd64_epilogue_frame_cache): Swallow NOT_AVAILABLE_ERROR, and set
2488 base_p if the frame base was computable.
2489 (amd64_epilogue_frame_unwind_stop_reason): New.
2490 (amd64_epilogue_frame_this_id): Don't build a frame id if the
2491 frame base was unavailable.
2492 (amd64_epilogue_frame_unwind): Install
2493 amd64_epilogue_frame_unwind_stop_reason.
2494 * i386-tdep.c: Include "exceptions.h".
2495 (struct i386_frame_cache): New field "base_p".
2496 (i386_init_frame_cache): Clear it.
2497 (i386_frame_cache_1): New, factored out from amd64_frame_cache.
2498 Avoid reading registers with functions that throw if the register
2499 is not necessary to compute the frame base.
2500 (i386_frame_cache): Reimplement wrapping amd64_frame_cache_1, and
2501 swallowing NOT_AVAILABLE_ERROR.
2502 (i386_frame_unwind_stop_reason): New.
2503 (i386_frame_this_id): Don't build a frame id if the frame base was
2505 (i386_frame_prev_register): Handle unavailable SP.
2506 (i386_frame_unwind): Install i386_frame_unwind_stop_reason.
2507 (i386_epilogue_frame_cache): Swallow NOT_AVAILABLE_ERROR, and set
2508 base_p if the frame base was computable.
2509 (i386_epilogue_frame_unwind_stop_reason): New.
2510 (i386_epilogue_frame_this_id): Don't build a frame id if the frame
2511 base was unavailable.
2512 (i386_epilogue_frame_unwind): Install
2513 i386_epilogue_frame_unwind_stop_reason.
2514 (i386_sigtramp_frame_cache): Swallow NOT_AVAILABLE_ERROR, and set
2515 base_p if the frame base was computable.
2516 (i386_sigtramp_frame_unwind_stop_reason): New.
2517 (i386_sigtramp_frame_this_id): Don't build a frame id if the frame
2518 base was unavailable.
2519 (i386_sigtramp_frame_unwind): Install
2520 i386_sigtramp_frame_unwind_stop_reason.
2521 * sentinel-frame.c (sentinel_frame_prev_register): Use the value
2522 type's size, not the register's.
2523 (sentinel_frame_unwind): Install default_frame_unwind_stop_reason.
2525 * alpha-mdebug-tdep.c (alpha_mdebug_frame_unwind): Install
2526 default_frame_unwind_stop_reason.
2527 * alpha-tdep.c (alpha_sigtramp_frame_unwind)
2528 (alpha_heuristic_frame_unwind): Ditto.
2529 * amd64obsd-tdep.c (amd64obsd_trapframe_unwind): Ditto.
2530 * arm-tdep.c (arm_prologue_unwind, arm_stub_unwind): Ditto.
2531 * avr-tdep.c (avr_frame_unwind): Ditto.
2532 * cris-tdep.c (cris_sigtramp_frame_unwind, cris_frame_unwind):
2534 * frv-linux-tdep.c (frv_linux_sigtramp_frame_unwind): Ditto.
2535 * frv-tdep.c (frv_frame_unwind): Ditto.
2536 * h8300-tdep.c (h8300_frame_unwind): Ditto.
2537 * hppa-hpux-tdep.c (hppa_hpux_sigtramp_frame_unwind): Ditto.
2538 * hppa-linux-tdep.c (hppa_linux_sigtramp_frame_unwind): Ditto.
2539 * hppa-tdep.c (hppa_frame_unwind, hppa_fallback_frame_unwind)
2540 (hppa_stub_frame_unwind): Ditto.
2541 * i386obsd-tdep.c (i386obsd_trapframe_unwind): Ditto.
2542 * ia64-tdep.c (ia64_frame_unwind, ia64_sigtramp_frame_unwind)
2543 (ia64_libunwind_frame_unwind)
2544 (ia64_libunwind_sigtramp_frame_unwind): Ditto.
2545 * iq2000-tdep.c (iq2000_frame_unwind): Ditto.
2546 * lm32-tdep.c (lm32_frame_unwind): Ditto.
2547 * m32c-tdep.c (m32c_unwind): Ditto.
2548 * m32r-linux-tdep.c (m32r_linux_sigtramp_frame_unwind): Ditto.
2549 * m32r-tdep.c (m32r_frame_unwind): Ditto.
2550 * m68hc11-tdep.c (m68hc11_frame_unwind): Ditto.
2551 * m68k-tdep.c (m68k_frame_unwind): Ditto.
2552 * m68klinux-tdep.c (m68k_linux_sigtramp_frame_unwind): Ditto.
2553 * m88k-tdep.c (m88k_frame_unwind): Ditto.
2554 * mep-tdep.c (mep_frame_unwind): Ditto.
2555 * microblaze-tdep.c (microblaze_frame_unwind): Ditto.
2556 * mips-tdep.c (mips_insn16_frame_unwind, mips_insn32_frame_unwind)
2557 (mips_stub_frame_unwind): Ditto.
2558 * mn10300-tdep.c (mn10300_frame_unwind): Ditto.
2559 * moxie-tdep.c (moxie_frame_unwind): Ditto.
2560 * mt-tdep.c (mt_frame_unwind): Ditto.
2561 * ppc-linux-tdep.c (ppu2spu_unwind): Ditto.
2562 * ppcobsd-tdep.c (ppcobsd_sigtramp_frame_unwind): Ditto.
2563 * rs6000-tdep.c (rs6000_frame_unwind): Ditto.
2564 * s390-tdep.c (s390_frame_unwind, s390_stub_frame_unwind)
2565 (s390_sigtramp_frame_unwind): Ditto.
2566 * score-tdep.c (score_prologue_unwind): Ditto.
2567 * sh-tdep.c (sh_frame_unwind): Ditto.
2568 * sh64-tdep.c (sh64_frame_unwind): Ditto.
2569 * sparc-sol2-tdep.c (sparc32_sol2_sigtramp_frame_unwind): Ditto.
2570 * sparc-tdep.c (sparc32_frame_unwind): Ditto.
2571 * sparc64-sol2-tdep.c (sparc64_sol2_sigtramp_frame_unwind): Ditto.
2572 * sparc64-tdep.c (sparc64_frame_unwind): Ditto.
2573 * sparc64fbsd-tdep.c (sparc64fbsd_sigtramp_frame_unwind): Ditto.
2574 * sparc64nbsd-tdep.c (sparc64nbsd_sigcontext_frame_unwind): Ditto.
2575 * sparc64obsd-tdep.c (sparc64obsd_frame_unwind)
2576 (sparc64obsd_trapframe_unwind): Ditto.
2577 * sparcnbsd-tdep.c (sparc32nbsd_sigcontext_frame_unwind): Ditto.
2578 * sparcobsd-tdep.c (sparc32obsd_sigtramp_frame_unwind): Ditto.
2579 * spu-tdep.c (spu_frame_unwind, spu2ppu_unwind): Ditto.
2580 * v850-tdep.c (v850_frame_unwind): Ditto.
2581 * vax-tdep.c (vax_frame_unwind): Ditto.
2582 * vaxobsd-tdep.c (vaxobsd_sigtramp_frame_unwind): Ditto.
2583 * xstormy16-tdep.c (frame_unwind xstormy16_frame_unwind): Ditto.
2584 * xtensa-tdep.c (xtensa_unwind): Ditto.
2586 2011-03-18 Pedro Alves <pedro@codesourcery.com>
2588 * tui/tui-hooks.c (tui_selected_frame_level_changed_hook): Assume
2589 there's always a frame. Use get_frame_pc_if_available instead of
2590 get_frame_pc, and if there's no PC available, don't look up a
2593 2011-03-18 Pedro Alves <pedro@codesourcery.com>
2595 * stack.c (print_frame_local_vars, print_frame_arg_vars): Handle
2598 2011-03-18 Pedro Alves <pedro@codesourcery.com>
2600 * tracepoint.c (set_traceframe_context): Handle unavailable PC
2603 2011-03-18 Pedro Alves <pedro@codesourcery.com>
2605 * frame.h (frame_unwind_caller_pc_if_available): Declare.
2606 * frame.c (frame_unwind_caller_pc_if_available): New.
2607 * stack.c (frame_info): Handle unavailable PC.
2609 2011-03-18 Pedro Alves <pedro@codesourcery.com>
2611 * frame.c (frame_unwind_pc): Rename to ...
2612 (frame_unwind_pc_if_available): ... this. New `pc' output
2613 parameter. Change return type to int. Gracefully handle
2614 gdbarch_unwind_pc throwing NOT_AVAILABLE_ERROR. Return 0 if that
2615 happened, or 1 otherwise.
2616 (frame_unwind_pc): Reimplement on top of
2617 frame_unwind_pc_if_available.
2618 (get_frame_func): Rename to ...
2619 (get_frame_func_if_available): New `pc' output parameter. Change
2620 return type to int. Gracefully handle the PC not being available.
2621 (get_frame_func): Reimplement on top of
2622 get_frame_func_if_available.
2623 (select_frame): Handle the PC being unavailable.
2624 (get_prev_frame): Handle the PC being unavailable.
2625 (get_frame_pc_if_available): New.
2626 (get_frame_address_in_block_if_available): New.
2627 (find_frame_sal): Handle the frame PC not being available.
2628 * frame.h (get_frame_pc_if_available): Declare.
2629 (get_frame_address_in_block_if_available): Declare.
2630 (get_frame_func_if_available): Declare.
2631 * stack.c (print_frame_info): Handle the PC being unavailable.
2632 (find_frame_funname): Ditto.
2633 (print_frame): Handle the PC being unavailable.
2634 (get_frame_language): Ditto.
2635 * blockframe.c (get_frame_block): Ditto.
2636 * macroscope.c (default_macro_scope): Ditto.
2637 * tui/tui-stack.c (tui_show_frame_info): Ditto.
2639 2011-03-18 Pedro Alves <pedro@codesourcery.com>
2641 * dwarf2loc.c (dwarf2_evaluate_loc_desc): Catch
2642 NOT_AVAILABLE_ERROR when evaluating the location expression.
2644 2011-03-18 Pedro Alves <pedro@codesourcery.com>
2646 * dwarf2loc.c (read_pieced_value): Handle get_frame_register_bytes
2647 returning that the register piece is unavailable/optimized out.
2648 (write_pieced_value): Handle get_frame_register_bytes returning
2649 that the register piece is unavailable/optimized out when doing a
2650 read-modify write of a bitfield.
2651 * findvar.c (value_from_register): Handle get_frame_register_bytes
2652 returning that the register piece is unavailable/optimized out.
2653 * frame.c (get_frame_register_bytes): New parameters `optimizedp'
2654 and `unavailablep'. Throw error on bad debug info. Use
2655 frame_register instead of frame_register_read, to fill in the new
2657 * frame.h (get_frame_register_bytes): New parameters `optimizedp'
2659 * valops.c: (value_assign): Adjust, and handle
2660 get_frame_register_bytes failing.
2661 * spu-tdep.c: Include exceptions.h.
2662 (spu_software_single_step): Adjust, and handle
2663 get_frame_register_bytes failing.
2664 (spu_get_longjmp_target): Ditto.
2665 * gdbarch.sh (register_to_value): Change to return int. New
2666 parameters `optimizedp' and `unavailablep'.
2667 * gdbarch.h, gdbarch.c: Regenerate.
2668 * i386-tdep.c (i386_register_to_value): Adjust to new
2669 gdbarch_register_to_value interface.
2670 * i387-tdep.c (i387_register_to_value): Ditto.
2671 * i387-tdep.h (i387_register_to_value): Ditto.
2672 * alpha-tdep.c (alpha_register_to_value): Ditto.
2673 * ia64-tdep.c (ia64_register_to_value): Ditto.
2674 * m68k-tdep.c (m68k_register_to_value): Ditto.
2675 * mips-tdep.c (mips_register_to_value): Ditto.
2676 * rs6000-tdep.c (rs6000_register_to_value): Ditto.
2678 2011-03-18 Pedro Alves <pedro@codesourcery.com>
2680 * findvar.c (value_of_register): Mark the value as unavailable, if
2681 the register is unavailable.
2682 * frame.h (frame_register_unwind): New `unavailablep' parameter.
2683 (frame_register): New `unavailablep' parameter.
2684 (frame_register_read): Update comment.
2685 * frame.c (frame_register_unwind): New `unavailablep' parameter.
2686 Set it if the register is unavailable. If the register is
2687 unavailable, clear the output buffer.
2688 (frame_register): New `unavailablep' parameter. Pass it down.
2689 (frame_unwind_register): Adjust.
2690 (put_frame_register): Adjust.
2691 (frame_register_read): Adjust. Also return false if the register
2693 (frame_register_unwind_location): Adjust.
2694 * sentinel-frame.c (sentinel_frame_prev_register): If the register
2695 is unavailable, mark the value accordingly.
2696 * stack.c (frame_info): Handle unavailable registers.
2698 2011-03-18 Pedro Alves <pedro@codesourcery.com>
2700 * mi/mi-main.c (register_changed_p): Handle REG_UNAVAILABLE, and
2701 simplify, using regcache_cooked_read.
2703 2011-03-18 Pedro Alves <pedro@codesourcery.com>
2705 * regcache.h (regcache_raw_read, regcache_raw_read_signed)
2706 (regcache_raw_read_unsigned, regcache_raw_read_signed)
2707 (regcache_raw_read_unsigned, regcache_raw_read_part)
2708 (regcache_cooked_read, regcache_cooked_read_signed)
2709 (regcache_cooked_read_unsigned, regcache_cooked_read_part)
2710 (regcache_cooked_read_ftype): Change return to enum
2712 * regcache.c: Include exceptions.h
2713 (regcache_save): Adjust to handle REG_UNAVAILABLE registers.
2714 (do_cooked_read): Change return to enum register_status. Always
2715 forward to regcache_cooked_read.
2716 (regcache_raw_read): Change return to enum register_status. If
2717 the register is not REG_VALID, memset the buffer. Return the
2719 (regcache_raw_read_signed): Handle non-REG_VALID registers and
2720 return the register's status.
2721 (regcache_raw_read_unsigned): Ditto.
2722 (regcache_cooked_read): Change return to enum register_status.
2723 Assert that with read-only regcaches, the register's status must
2724 be known. If the regcache is read-only, and the register is not
2725 REG_VALID, memset the buffer. Return the register's status.
2726 (regcache_cooked_read_signed): Change return to enum
2727 register_status. Handle non-REG_VALID registers and return the
2729 (regcache_cooked_read_unsigned): Change return to enum
2730 register_status. Handle non-REG_VALID registers and return the
2732 (regcache_xfer_part, regcache_raw_read_part)
2733 (regcache_cooked_read_part): Change return to enum
2734 register_status. Return the register's status.
2735 (regcache_read_pc): Throw NOT_AVAILABLE_ERROR if the register is
2737 (regcache_dump): Handle unavailable cooked registers.
2738 * frame.c (do_frame_register_read): Adjust interface to match
2739 regcache_cooked_read_ftype.
2740 * gdbarch.sh (pseudo_register_read): Change return to enum
2742 * gdbarch.h, gdbarch.c: Regenerate.
2744 * i386-tdep.h (i386_pseudo_register_read): Change return to enum
2746 * i386-tdep.c (i386_pseudo_register_read): Change return to enum
2747 register_status. If reading a raw register indicates the raw
2748 register is not valid, return the raw register's status,
2749 otherwise, return REG_VALID.
2750 * amd64-tdep.c (amd64_pseudo_register_read): Change return to enum
2751 register_status. Handle non-REG_VALID raw registers and return
2752 the register's status.
2753 * arm-tdep.c (arm_neon_quad_read)
2754 (arm_pseudo_read): Change return to enum register_status. Handle
2755 non-REG_VALID raw registers and return the register's status.
2756 * avr-tdep.c (avr_pseudo_register_read): Ditto.
2757 * frv-tdep.c (frv_pseudo_register_read): Ditto.
2758 * h8300-tdep.c (h8300_pseudo_register_read): Ditto.
2759 * hppa-tdep.c (hppa_pseudo_register_read): Ditto.
2760 * m32c-tdep.c (m32c_move_reg_t): Change return to enum
2762 (m32c_raw_read, m32c_raw_write, m32c_banked_read)
2763 (m32c_banked_write, m32c_sb_read, m32c_sb_write, m32c_part_read)
2764 (m32c_part_write, m32c_cat_read, m32c_cat_write)
2765 (m32c_r3r2r1r0_read, m32c_r3r2r1r0_write)
2766 (m32c_pseudo_register_read): Change return to enum
2767 register_status. Adjust.
2768 * m68hc11-tdep.c (m68hc11_pseudo_register_read): Change return to
2769 enum register_status. Return the register's status.
2770 * mep-tdep.c (mep_pseudo_cr32_read): Change return to enum
2771 register_status. Return the register's status.
2772 (mep_pseudo_cr64_read, mep_pseudo_register_read): Ditto.
2773 * mips-tdep.c (mips_pseudo_register_read): Ditto.
2774 * mt-tdep.c (mt_pseudo_register_read): Ditto.
2775 * rs6000-tdep.c (move_ev_register_func): New typedef.
2776 (e500_move_ev_register): Use it. Change return to enum
2777 register_status. Return the register's status.
2778 (do_regcache_raw_read): New function.
2779 (do_regcache_raw_write): New function.
2780 (e500_pseudo_register_read): Change return to enum
2781 register_status. Return the register's status. Use
2782 do_regcache_raw_read.
2783 (e500_pseudo_register_write): Adjust. Use do_regcache_raw_write.
2784 (dfp_pseudo_register_read): Change return to enum register_status.
2785 Return the register's status.
2786 (vsx_pseudo_register_read): Ditto.
2787 (efpr_pseudo_register_read): Ditto.
2788 (rs6000_pseudo_register_read): Ditto.
2789 * s390-tdep.c (s390_pseudo_register_read): Change return to enum
2790 register_status. Return the register's status.
2791 * sh64-tdep.c (pseudo_register_read_portions): New function.
2792 (sh64_pseudo_register_read): Change return to enum
2793 register_status. Use pseudo_register_read_portions. Return the
2795 * ia64-tdep.c (ia64_pseudo_register_read): Change return to enum
2796 register_status. Return the register's status.
2797 * sh-tdep.c (pseudo_register_read_portions): New function.
2798 (sh_pseudo_register_read): Change return to enum register_status.
2799 Use pseudo_register_read_portions. Return the register's status.
2800 * sparc-tdep.c (sparc32_pseudo_register_read): Change return to
2801 enum register_status. Return the register's status.
2802 * sparc64-tdep.c (sparc64_pseudo_register_read): Ditto.
2803 * spu-tdep.c (spu_pseudo_register_read_spu)
2804 (spu_pseudo_register_read): Ditto.
2805 * xtensa-tdep.c (xtensa_register_read_masked)
2806 (xtensa_pseudo_register_read): Ditto.
2807 * bfin-tdep.c (bfin_pseudo_register_read): Ditto.
2809 2011-03-18 Pierre Muller <muller@ics.u-strasbg.fr>
2811 * python/py-value.c (valpy_getitem): Fix formatting of error function
2814 2011-03-18 Pierre Muller <muller@ics.u-strasbg.fr>
2816 ARI fixes: Add missing internationalization markups throughout
2818 * darwin-nat-info.c: Ditto.
2821 * mi/mi-main.c: Ditto.
2823 2011-03-18 Pierre Muller <muller@ics.u-strasbg.fr>
2825 ARI fixes: Add missing internationalization markups throughout
2828 * cp-name-parser.y: Ditto.
2831 * objc-exp.y: Ditto.
2834 2011-03-18 Pierre Muller <muller@ics.u-strasbg.fr>
2836 ARI fixes: Messages should have no trailing new lines.
2837 * darwin-nat.c (mach_check_error): Remove trailing new line from
2838 warning function call message.
2839 * record.c (bfdcore_read): Idem for error call.
2841 2011-03-18 Pierre Muller <muller@ics.u-strasbg.fr>
2843 * common/signals.c (target_signal_from_host): Add _ markup to error
2844 function call message.
2845 (target_signal_to_host): Add _ markup and remove trailing new line
2846 from warning call message.
2847 (target_signal_from_command): Add _ markup to error function call
2850 2011-03-18 Phil Muldoon <pmuldoon@redhat.com>
2854 * python/python.c (gdbpy_write): Accept a stream argument and
2855 operate to the appropriate stream.
2856 (gdbpy_flush): Likewise.
2857 (_initialize_python): Add stream constants.
2858 (finish_python_initialization): Add GdbOutputErrorFile class.
2860 2011-03-18 Kwok Cheung Yeung <kcy@codesourcery.com>
2862 * MAINTAINERS: Add myself as a write-after-approval maintainer.
2864 2011-03-18 Kwok Cheung Yeung <kcy@codesourcery.com>
2866 * amd64-tdep.c (amd64_relocate_instruction): Fix ordering of arguments
2867 to store_signed_integer. Add debug message when relocating CALL
2868 instructions. Fix formatting of debug message.
2869 * i386-tdep.c (i386_relocate_instruction): Ditto.
2871 2011-03-17 Joel Brobecker <brobecker@gnat.com>
2873 * target.h (struct target_ops): Remove to_lookup_symbol field.
2874 (target_lookup_symbol): Delete macro.
2875 * target.c (nosymbol, debug_to_lookup_symbol): Delete.
2876 (update_current_target, setup_target_debug): Remove handling
2877 of to_lookup_symbol target_ops field.
2878 * ada-tasks.c (get_known_tasks_addr): Remove use of
2879 target_lookup_symbol.
2880 * coffread.c (coff_symtab_read): Likewise.
2881 * dbxread.c (read_dbx_symtab): Ditto.
2883 2011-03-17 Joel Brobecker <brobecker@gnat.com>
2886 * configure.ac: Add getthrds declaration check.
2887 * configure, config.in: Regenerate.
2888 * aix-thread.c (getthrds): Declare only if not already declared
2889 in procinfo.h. More declaration out of get_signaled_thread to
2892 2011-03-17 Phil Muldoon <pmuldoon@redhat.com>
2894 * python/py-symtab.c: Populate symtab_object_methods,
2896 (stpy_is_valid): New function.
2897 (salpy_is_valid): Ditto.
2898 * python/py-symbol.c: Declare symbol_object_methods. Populate.
2899 (sympy_is_valid): New function.
2900 * python/py-objfile.c: Declare objfile_object_methods. Populate.
2901 (objfpy_is_valid): New function.
2902 * python/py-inferior.c: Populate inferior_object_methods.
2903 (infpy_is_valid): New function.
2904 * python/py-infthread.c: Populate thread_object_methods.
2905 (thpy_is_valid): New function.
2906 * python/py-block.c: Declare block_object_methods. Populate. Declare
2907 block_iterator_object_methods. Populate.
2908 (blpy_is_valid): New function.
2909 (blpy_iter_is_valid): Ditto.
2911 2011-03-16 Keith Seitz <keiths@redhat.com>
2913 * linespec.c (find_methods): Canonicalize NAME before looking
2915 (name_end): New function.
2916 (keep_name_info): New function.
2917 (decode_line_1): Use keep_name_info.
2918 (decode_compound): Likewise.
2919 * cli/cli-utils.h (remove_trailing_whitespace): New function.
2920 * cli/cli-utils.c (remove_trailing_whitespace): Likewise.
2923 * linespec.c (locate_first_half): Keep overload information, too.
2924 (decode_compound): Use a string to represent break characters
2926 If P points to a break character, do not increment it.
2927 For C++ and Java, keep overload information and relevant keywords.
2928 If we cannot find a symbol, search the minimal symbols.
2931 * linespec.c (decode_compound): Rename SAVED_ARG to
2933 Make a copy of THE_REAL_SAVED_ARG in SAVED_ARG and strip
2935 Pass a valid block to lookup_symbol.
2936 (lookup_prefix_sym): Likewise.
2937 (find_method): Construct search name based on SYM_CLASS instead
2939 * psymtab.c (lookup_partial_symbol): Add language parameter.
2940 (lookup_symbol_aux_psymtabs): Likewise.
2941 Don't assume that the psymtab we found was the right one. Search
2942 for the desired symbol in the symtab to be certain.
2943 (psymtab_search_name): New function.
2944 (lookup_partial_symbol): Use psymtab_search_name.
2945 Add language parameter.
2946 (read_symtabs_for_function): Add language parameter and pass to
2947 lookup_partial_symbol.
2948 (find_symbol_file_from_partial): Likewise.
2950 2011-03-16 Paul Pluzhnikov <ppluzhnikov@google.com>
2953 * dwarf2read.c (noop_record_line): New function.
2954 (dwarf_decode_lines): Ignore line tables for GCd functions.
2956 2011-03-16 Pierre Muller <muller@ics.u-strasbg.fr>
2958 Fix ARI warnings about new lines at the end of messages, which
2959 are unneeded as there is a new line added at the end of the message
2961 * darwin-nat.c (darwin_stop_inferior): Ditto.
2962 * dec-thread.c (dec_thread_get_ada_task_ptid): Ditto.
2963 * dfp.c (decimal_to_number): Ditto.
2964 * exec.c (print_section_info): Ditto.
2965 * i386-darwin-nat.c (darwin_set_sstep): Ditto.
2966 * osdata.c (get_osdata): Ditto.
2967 * record.c (bfdcore_write): Ditto.
2968 * remote-mips.c (mips_readchar): Ditto.
2969 * remote.c (read_ptid): Ditto.
2970 * ser-mingw.c (ser_windows_raw): Ditto.
2971 * tracepoint.c (add_local_symbols): Ditto.
2972 * windows-nat.c (fake_create_process): Ditto.
2974 2011-03-16 Tom Tromey <tromey@redhat.com>
2976 * tracepoint.c (stop_tracing): Don't declare.
2977 * event-top.c (after_char_processing_hook): Add `(void)'.
2979 2011-03-16 Phil Muldoon <pmuldoon@redhat.com>
2981 * NEWS: Add Parameter sub-classing description.
2983 2011-03-16 Kai Tietz <ktietz@redhat.com>
2985 * MAINTAINERS: Update my e-mail address.
2987 2011-03-15 Andreas Tobler <andreast@fgznet.ch>
2989 * MAINTAINERS: Add myself for write after approval privileges.
2991 2011-03-15 Michael Snyder <msnyder@vmware.com>
2993 * frame.c (find_frame_sal): Assert sym is not null.
2995 * dbxread.c (process_one_symbol): Assert 'name' is not null.
2997 * objc-lang.c (selectors_info): Check strchr for null result.
2999 * stabsread.c (define_symbol): Guard against bad stabstring input.
3001 2011-03-15 Pierre Muller <muller@ics.u-strasbg.fr>
3003 Remove trailing spaces and tabulations from pascal language
3008 p-valprint.c: Ditto.
3010 2011-03-15 Jan Kratochvil <jan.kratochvil@redhat.com>
3012 * dwarf2read.c (dwarf2_get_pc_bounds): Require HIGH strictly higher
3013 than LOW. Comment it.
3014 (read_partial_die): Call complaint for inappropriate zero LOWPC or
3015 HIGHPC not strictly higher than LOWPC.
3017 2011-03-15 Pierre Muller <muller@ics.u-strasbg.fr>
3019 Fix formatting of function declarations returning a pointer in
3021 * varobj.c (varobj_add_child): Ditto.
3022 * hppa-tdep.h (hppa_init_objfile_priv_data): Ditto.
3023 * inferior.h (get_displaced_step_closure_by_addr): Ditto.
3025 2011-03-15 Ulrich Weigand <uweigand@de.ibm.com>
3027 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): Add support
3028 for the "generic" vector ABI used with GCC 4.3 and later.
3029 (ppc64_sysv_abi_return_value): Likewise.
3031 2011-03-15 Ulrich Weigand <uweigand@de.ibm.com>
3033 * infcall.c (call_function_by_hand): Function return value is
3034 always a non_lval, even when using struct_return.
3036 2011-03-15 Pedro Alves <pedro@codesourcery.com>
3038 * printcmd.c (ALL_DISPLAYS_SAFE): New.
3039 (map_display_numbers): New.
3040 (do_delete_display): New.
3041 (undisplay_command): Use map_display_numbers.
3042 (do_enable_disable_display): New.
3043 (enable_disable_display_command): New function.
3044 (enable_display): Delete.
3045 (enable_display_command): New.
3046 (disable_display_command): Reimplement.
3047 (_initialize_printcmd): Adjust "enable display" command to use
3048 `enable_display_command' as callback.
3050 2011-03-14 Phil Muldoon <pmuldoon@redhat.com>
3052 * NEWS: Add Python breakpoint 'stop' operation.
3054 2011-03-14 Phil Muldoon <pmuldoon@redhat.com>
3056 * NEWS: Delete duplicate entry. Fix typo.
3058 2011-03-14 Pierre Muller <muller@ics.u-strasbg.fr>
3060 Fix ARI warning about function names in first column.
3061 Put prototype declaration on same line as return type.
3062 * objc-exp.y: Ditto.
3064 * python/py-stopevent.h: Ditto.
3065 For long function names, split parameters to
3066 allow function name on same line as return type.
3067 * solib-pa64.c: Ditto.
3070 For long function declaration, use single line.
3071 * hppa-tdep.h: Ditto.
3072 * inferior.h: Ditto.
3074 2011-03-14 Phil Muldoon <pmuldoon@redhat.com>
3076 * python/python.h: Declare gdbpy_should_stop and
3077 gdbpy_breakpoint_has_py_cond.
3078 * python/python.c: Add python.h to includes. Remove python.h from
3079 HAVE_PYTHON definition
3080 (gdbpy_should_stop): New dummy function.
3081 (gdbpy_breakpoint_has_py_cond): New dummy function.
3082 * python/py-breakpoint.c (bppy_init): Rewrite to allow
3083 sub-classing capabilities.
3084 (gdbpy_should_stop): New function.
3085 (gdbpy_breakpoint_has_py_cond): New function.
3086 (local_setattro): New function.
3087 * breakpoint.c (condition_command): Add check for Python 'stop'
3089 (bpstat_check_breakpoint_conditions): Execute Python 'stop'
3090 operation function as part of stop/continue tests.
3092 2011-03-14 Tom Tromey <tromey@redhat.com>
3095 * dwarf2loc.c (dwarf_expr_dwarf_call): Remove 'return'.
3096 (needs_frame_dwarf_call): Likewise.
3098 2011-03-14 Pierre Muller <muller@ics.u-strasbg.fr>
3100 Fix ARI warning about functions without parameters that do not
3102 * breakpoint.c (all_tracepoints): Replace () by (void).
3103 * f-exp.y (match_string_literal): Ditto.
3105 * m2-exp.y (yylex): Ditto.
3106 * mep-tdep.c (current_me_module): Ditto.
3107 (current_options): Ditto.
3108 (current_cop_data_bus_width): Ditto.
3109 (current_cr_names): Ditto.
3110 (current_cr_is_float): Ditto.
3111 (current_ccr_names): Ditto.
3112 * objc-exp.y (yylex): Ditto.
3113 * p-exp.y (yylex): Ditto.
3114 * remote.c (send_interrupt_sequence): Ditto.
3115 * tracepoint.c (current_trace_status): Ditto.
3116 * python/py-evts.c (gdbpy_initialize_py_events): Ditto.
3117 * python/py-prettyprint.c (push_dummy_python_frame): Ditto.
3119 2011-03-11 Michael Snyder <msnyder@vmware.com>
3121 * cli/cli-decode.h (CMD_LIST_AMBIGUOUS): Define.
3122 * cli/cli-decode.c (lookup_cmd_1): Use CMD_LIST_AMBIGUOUS.
3123 (lookup_cmd): Test for CMD_LIST_AMBIGUOUS.
3124 * completer.c (complete_line_internal): Use CMD_LIST_AMBIGUOUS.
3125 * top.c (set_verbose): Use CMD_LIST_AMBIGUOUS.
3127 * event-loop-c (delete_async_signal_handler): Assert prev_ptr.
3128 (delete_async_event_handler): Ditto.
3130 * python/py-breakpoint.c (bppy_set_condition): Stop memory leak.
3132 * python/py-breakpoint.c (bppy_get_commands): Fix memory leak.
3134 * top.c (set_verbose): Assert showcmd was found.
3136 2011-03-11 Maxim Grigoriev <maxim2405@gmail.com>
3138 * xtensa-tdep.c (warning_once): Correct style issues.
3140 2011-03-11 Yao Qi <yao@codesourcery.com>
3142 * arm-tdep.c (copy_ldr_str_ldrb_strb): Remove redundant statements.
3144 2011-03-11 Andreas Schwab <schwab@redhat.com>
3146 * common/aclocal.m4: Remove.
3148 2011-03-10 Maxim Grigoriev <maxim2405@gmail.com>
3150 * xtensa-tdep.c (windowing_enabled): Remove inline attribute.
3151 (xtensa_write_register, xtensa_read_register): Likewise.
3152 (xtensa_hextochar): Removed.
3153 (xtensa_init_reggroups): Replace xtensa_hextochar () by explicit code.
3155 2011-03-10 Maxim Grigoriev <maxim2405@gmail.com>
3157 * xtensa-tdep.c (xtensa_c0reg_t): Update comments.
3158 (xtensa_call0_frame_cache_t): Update comments. New fields added.
3159 (xtensa_alloc_frame_cache): Add initialization for new fields.
3160 (xtensa_frame_cache): Change the way how call0_frame_cache () is called.
3161 (warning_once): New function.
3162 (xtensa_insn_kind): New item c0opc_and.
3163 (call0_classify_opcode): Add the case for AND instruction.
3164 (call0_track_op): Change arguments. New local variable litbase.
3165 Add the case to handle c0opc_and. Update algorithms for c0opc_mov,
3166 c0opc_l32r, c0opc_s32i to take into account dynamic stack adjustments
3168 Add cases for c0opc_l32e, c0opc_s32e, c0opc_rfwo, c0opc_rfwu.
3169 (call0_analyze_prologue): Update the comments. Change arguments.
3170 Add the variety of updates to handle extended prologues, which now can
3171 conduct dynamic stack adjustments.
3172 (call0_frame_cache): Likewise.
3173 (xtensa_skip_prologue): Update call0_analyze_prologue () function call.
3174 (xtensa_gdbarch_init): Initialize xtensa_session_once_reported.
3176 2011-03-10 Michael Snyder <msnyder@vmware.com>
3178 * tracepoint.c (cmd_qtv): Discard unused value 'packet'.
3179 (cmd_qtframe): Ditto.
3180 (cmd_qtbuffer): Ditto.
3181 (cmd_bigqtbuffer): Ditto.
3183 2011-03-10 Tom Tromey <tromey@redhat.com>
3185 * tracepoint.c (trace_actions_command): Update.
3186 * thread.c (thread_apply_command): Update.
3187 * reverse.c (delete_bookmark_command): Update.
3188 (bookmarks_info): Update.
3189 * printcmd.c (undisplay_command): Update.
3190 * memattr.c (mem_enable_command): Update.
3191 (mem_disable_command): Update.
3192 (mem_delete_command): Update.
3193 * inferior.c (detach_inferior_command): Update.
3194 (kill_inferior_command): Update.
3195 (remove_inferior_command): Update.
3196 * cli/cli-utils.h (struct get_number_or_range_state): New.
3197 (init_number_or_range): Declare.
3198 (get_number_or_range): Update.
3199 * cli/cli-utils.c (init_number_or_range): New function.
3200 (get_number_or_range): Change 'pp' parameter to 'state'. Remove
3202 (number_is_in_list): Update.
3203 * breakpoint.h (get_tracepoint_by_number): Update.
3204 * breakpoint.c (map_breakpoint_numbers): Update for change to
3205 get_number_or_range.
3206 (find_location_by_number): Use get_number, not
3207 get_number_or_range.
3208 (trace_pass_set_count): New function.
3209 (trace_pass_command): Update for change to get_number_or_range.
3211 (get_tracepoint_by_number): Remove 'multi_p' parameter; add
3214 2011-03-10 Phil Muldoon <pmuldoon@redhat.com>
3216 * python/py-param.c (add_setshow_generic): Add set/show callback
3217 parameters. Register Python object context.
3218 (get_show_value): New function.
3219 (get_set_value): New function.
3220 (call_doc_function): New function.
3221 (get_doc_string): Move behind get_show_value/get_set_value.
3223 2011-03-10 Andreas Tobler <andreast-list@fgznet.ch>
3225 * fbsd-nat.c (fbsd_make_corefile_notes): Constify local `fname'.
3227 2011-03-09 Maxim Grigoriev <maxim2405@gmail.com>
3229 * xtensa-tdep.c (xtensa_read_register): Add comment.
3230 (xtensa_write_register): Likewise.
3231 (xtensa_hextochar): Add comment and update to match coding conventions.
3232 (xtensa_frame_cache, xtensa_return_value): Follow coding conventions.
3233 (execute_l32e, execute_s32e, execute_code): Update comments.
3234 (xtensa_exception_handler_t): Update to match coding conventions.
3235 (xtensa_insn_kind): Likewise.
3237 2011-03-09 Michael Snyder <msnyder@vmware.com>
3239 * mi-cmd-disas.c (mi_cmd_disassemble): Fix memory leak.
3241 2011-03-09 Pedro Alves <pedro@codesourcery.com>
3243 * nto-tdep.c (nto_find_and_open_solib): Constify local `base'.
3245 2011-03-09 Tom Tromey <tromey@redhat.com>
3247 * thread.c (restore_selected_frame): Handle frame_level == -1.
3248 (make_cleanup_restore_current_thread): Use
3249 get_selected_frame_if_set.
3250 * frame.h (get_selected_frame_if_set): Declare.
3251 * frame.c (get_selected_frame_if_set): New function.
3253 2011-03-09 Pedro Alves <pedro@codesourcery.com>
3255 * cli/cli-cmds.c (shell_escape): Use lbasename.
3256 * coffread.c (coff_start_symtab): Constify parameter.
3257 (complete_symtab): Constify `name' parameter.
3258 (coff_symtab_read): Constify `filestring' local.
3259 (coff_getfilename): Constify return and `result' local.
3261 * fbsd-nat.c (fbsd_make_corefile_notes): Use lbasename.
3262 * linux-fork.c (info_checkpoints_command): Use lbasename.
3263 * linux-nat.c (linux_nat_make_corefile_notes): Use lbasename.
3264 * minsyms.c (lookup_minimal_symbol): Use lbasename.
3265 * nto-tdep.c (nto_find_and_open_solib): Use lbasename.
3266 * procfs.c (procfs_make_note_section): Use lbasename.
3267 * tui/tui-io.c (printable_part): Constity return and parameter.
3269 (print_filename): Constify parameters, and local `s'.
3270 (tui_rl_display_match_list): Constify local `temp'.
3272 2011-03-09 Jan Kratochvil <jan.kratochvil@redhat.com>
3275 2011-03-08 Jan Kratochvil <jan.kratochvil@redhat.com>
3276 Fix DWARF-3+ DW_AT_accessibility default assumption.
3277 * dwarf2read.c (dwarf2_add_field): Fix new_field->accessibility for
3278 cu->header.version >= 3.
3280 2011-03-09 Yao Qi <yao@codesourcery.com>
3282 * common/Makefile.in: Remove.
3283 * common/configure: Remove.
3284 * common/configure.ac: Remove.
3286 2011-03-09 Yao Qi <yao@codesourcery.com>
3289 2011-02-11 Yao Qi <yao@codesourcery.com>
3291 * common/Makefile.in: Add copyright header.
3293 2011-02-11 Yao Qi <yao@codesourcery.com>
3295 * Makefile.in: Remove signals.o from COMMON_OBS. Link
3297 * configure.ac: Add common to sub dir.
3298 * configure: Regenerate.
3300 2011-03-08 Maxim Grigoriev <maxim2405@gmail.com>
3302 * xtensa-tdep.c (call0_ret): New function.
3303 (xtensa_skip_prologue): Speed up analysis.
3305 2011-03-08 Maxim Grigoriev <maxim2405@gmail.com>
3307 * xtensa-tdep.c (xtensa_register_reggroup_p): Count in all registers
3308 while executing MI command -data-list-changed-registers.
3310 2011-03-08 Maxim Grigoriev <maxim2405@gmail.com>
3312 * xtensa-tdep.c (xtensa_read_register): New function.
3313 (xtensa_write_register): New function.
3314 (xtensa_find_register_by_name): New function.
3315 (xtensa_windowed_frame_cache): Update comments in type description.
3316 (xtensa_frame_cache): Likewise.
3317 (xtensa_window_interrupt_insn): New function.
3318 (xtensa_frame_cache): Add analysis for Xtensa Window Exception frames.
3319 (xtensa_insn_kind): Add new instructions.
3320 (rwx_special_register): New function.
3321 (call0_classify_opcode): Add new instructions to the analysis.
3322 (a0_saved, a7_saved, a11_saved): New variables.
3323 (a0_was_saved, a7_was_saved, a11_was_saved): New variables.
3324 (execute_l32e): New function.
3325 (execute_s32e): New function.
3326 (xtensa_exception_handler_t): New type.
3327 (execute_code): New function.
3328 (xtensa_window_interrupt_frame_cache): New function to conduct frame
3329 analysis for Xtensa Window Exception handlers.
3331 2011-03-08 Maxim Grigoriev <maxim2405@gmail.com>
3333 * xtensa-tdep.c (TX_PS): New.
3334 (windowing_enabled): Update to count for Call0 ABI.
3335 (xtensa_hextochar): New.
3336 (xtensa_init_reggroups): Make algorithm generic.
3337 (xtensa_frame_cache): Use TX_PS on Tiny Xtensa.
3339 2011-03-08 Maxim Grigoriev <maxim2405@gmail.com>
3341 * xtensa-tdep.h (XTENSA_MAX_COPROCESSOR): Update.
3343 2011-03-08 Michael Snyder <msnyder@vmware.com>
3345 * i386-tdep.c (i386_follow_jump): Check return value of
3347 (i386_analyze_struct_return): Ditto.
3348 (i386_skip_probe): Ditto.
3349 (i386_match_insn): Ditto.
3350 (i386_skip_noop): Ditto.
3351 (i386_analyze_frame_setup): Ditto.
3352 (i386_analyze_register_saves): Ditto.
3353 (i386_skip_prologue): Ditto.
3354 (i386_skip_main_prologue): Ditto.
3356 * target.c (read_whatever_is_readable): Fix memory leak.
3358 * i386-tdep.c (i386_process_record): Document fall through.
3360 2011-03-08 Jan Kratochvil <jan.kratochvil@redhat.com>
3362 Fix DWARF-3+ DW_AT_accessibility default assumption.
3363 * dwarf2read.c (dwarf2_add_field): Fix new_field->accessibility for
3364 cu->header.version >= 3.
3366 2011-03-08 Pedro Alves <pedro@codesourcery.com>
3368 * remote.c (remote_check_symbols): Skip if the target has no
3371 2011-03-08 Joel Brobecker <brobecker@adacore.com>
3373 * target.c (read_whatever_is_readable): Reformat comment,
3374 with a minor typo fix. Minor reformatting of the code.
3376 2011-03-08 Yao Qi <yao@codesourcery.com>
3378 * arm-tdep.c: Remove prototype declaration displaced_in_arm_mode.
3379 (displaced_read_reg): Add `dsc' parameter, remove `from' parameter.
3380 Use cached result instead of calling displaced_in_arm_mode again.
3381 (branch_write_pc, alu_write_pc, load_write_pc): Add `dsc' parameter.
3382 (displaced_write_reg, copy_preload, copy_preload_reg): Callers update.
3383 (cleanup_copro_load_store, copy_copro_load_store): Likewise.
3384 (cleanup_branch, copy_bx_blx_reg, copy_alu_imm): Likewise.
3385 (cleanup_alu_reg, copy_alu_reg, cleanup_alu_shifted_reg): Likewise.
3386 (copy_alu_shifted_reg, cleanup_load, cleanup_store): Likewise.
3387 (copy_extra_ld_st, copy_ldr_str_ldrb_strb): Likewise.
3388 (cleanup_block_load_all, cleanup_block_store_pc): Likewise.
3389 (cleanup_block_load_pc, copy_block_xfer): Likewise.
3390 * arm-linux-tdep.c (arm_linux_copy_svc): Callers update.
3391 (arm_catch_kernel_helper_return): Likewise.
3392 * gdb/arm-tdep.h : Update function declarations.
3394 2011-03-07 Michael Snyder <msnyder@vmware.com>
3396 * dwarf2loc.c (indirect_pieced_value): Assert 'piece' not null.
3398 * ser-unix.c (hardwire_get_tty_state): Stop memory leak.
3400 * mi/mi-cmd-env.c (_initialize_mi_cmd_env): Free environment.
3402 * elfread.c (elf_symtab_read): Stop memory leak.
3404 * main.c (captured_main): Fix memory leak.
3406 2011-03-07 Andreas Schwab <schwab@linux-m68k.org>
3408 * ada-lang.c (compare_names): Call is_name_suffix with string1
3411 2011-03-07 Tom Tromey <tromey@redhat.com>
3413 * xcoffread.c (xcoff_sym_fns): Update.
3414 * symfile.h (struct sym_fns) <sym_read_psymbols>: New field.
3415 (enum symfile_add_flags) <SYMFILE_NO_READ>: New constant.
3416 * symfile.c (syms_from_objfile): Handle SYMFILE_NO_READ.
3417 (symbol_file_add_with_addrs_or_offsets): Likewise.
3418 (reread_symbols): Handle OBJF_PSYMTABS_READ.
3419 * somread.c (som_sym_fns): Update.
3420 * psymtab.h (require_partial_symbols): Declare.
3421 * psymtab.c (require_partial_symbols): New function.
3422 (ALL_OBJFILE_PSYMTABS_REQUIRED): New macro.
3423 (ALL_OBJFILE_PSYMTABS): Undef.
3424 (ALL_PSYMTABS): Move from psympriv.h.
3425 (lookup_partial_symtab, find_pc_sect_psymtab)
3426 (lookup_symbol_aux_psymtabs, relocate_psymtabs)
3427 (find_last_source_symtab_from_partial)
3428 (forget_cached_source_info_partial)
3429 (print_psymtab_stats_for_objfile, read_symtabs_for_function)
3430 (expand_partial_symbol_tables, read_psymtabs_with_filename)
3431 (map_symbol_names_psymtab, map_symbol_filenames_psymtab)
3432 (find_symbol_file_from_partial, map_matching_symbols_psymtab)
3433 (expand_symtabs_matching_via_partial, maintenance_info_psymtabs):
3434 Use ALL_OBJFILE_PSYMTABS_REQUIRED.
3435 * psympriv.h (ALL_PSYMTABS): Move to psymtab.c.
3436 * objfiles.h (OBJF_PSYMTABS_READ): New macro.
3437 * objfiles.c (objfile_has_partial_symbols): Handle lazily-read
3439 * mipsread.c (ecoff_sym_fns): Update.
3440 * machoread.c (macho_sym_fns): Update.
3441 * elfread.c (elf_symfile_read): Set up for lazy psymtab reading.
3442 (read_psyms): New function.
3443 (elf_sym_fns, elf_sym_fns_gdb_index): Update.
3444 (elf_sym_fns_lazy_psyms): New global.
3445 * dwarf2read.c (dwarf2_initialize_objfile): Don't call
3446 dwarf2_build_psymtabs.
3447 * dbxread.c (aout_sym_fns): Update.
3448 * coffread.c (coff_sym_fns): Update.
3450 2011-03-07 Tom Tromey <tromey@redhat.com>
3452 * infrun.c (print_exited_reason): Include inferior id and pid in
3455 2011-03-07 Tom Tromey <tromey@redhat.com>
3457 * target.h (struct target_ops) <to_has_execution>: Add ptid_t
3459 (target_has_execution_1): Update.
3460 (target_has_execution_current): Declare.
3461 (target_has_execution): Call target_has_execution_current.
3462 (default_child_has_execution): Update.
3463 * target.c (default_child_has_execution): Add 'the_ptid'
3465 (target_has_execution_1): Likewise.
3466 (target_has_execution_current): New function.
3467 (add_target): Update.
3468 (init_dummy_target): Update.
3469 * remote-m32r-sdi.c (m32r_has_execution): New function.
3470 (init_m32r_ops): Use it.
3471 * record.c (record_core_has_execution): Now static. Add
3472 'the_ptid' parameter.
3473 * inferior.c (have_live_inferiors): Don't save current thread.
3474 Use target_has_execution_1.
3476 2011-03-07 Yao Qi <yao@codesourcery.com>
3478 * Makefile.in (aclocal_m4_deps): Remove gnulib/m4/memcmp.m4.
3480 2011-03-07 Joel Brobecker <brobecker@adacore.com>
3482 * elfread.c (elf_symtab_read): Minor reformatting.
3484 2011-03-07 Joel Brobecker <brobecker@adacore.com>
3486 * objc-lang.c (selectors_info): Minor reformatting.
3488 2011-03-07 Joel Brobecker <brobecker@adacore.com>
3490 * ada-lang.c (compare_names): Add FALLTHROUGH comment.
3492 2011-03-07 Joel Brobecker <brobecker@adacore.com>
3493 Michael Snyder <msnyder@vmware.com>
3495 * ada-valprint.c (ada_val_print_array): Move the declaration of
3496 "byte_order" and "elttype" inside the block where these variables
3497 are actually used. Remove some special handling for the case
3498 where "elttype" and "eltlen" are null. Replace by a comment
3499 and a couple of assertion checks.
3501 2011-03-05 Michael Snyder <msnyder@vmware.com>
3503 * source.c (add_path): Replace semicolon at end of block.
3504 * dwarf2expr.c (execute_stack_op): Ditto.
3506 2011-03-05 Mike Frysinger <vapier@gentoo.org>
3508 * bfin-tdep.c: Include sim-regno.h and gdb/sim-bfin.h.
3509 * configure.tgt (bfin-*-*linux*): Define gdb_sim.
3510 (bfin-*-*): Likewise.
3512 2011-03-05 Michael Snyder <msnyder@vmware.com>
3514 * dwarf2expr.c (execute_stack_op): Delete superfluous semicolon.
3515 * mdebugread.c (parse_symbol): Ditto.
3516 * parse.c (parse_exp_in_context): Ditto.
3517 * source.c (add_path): Ditto.
3518 * utils.c (gnu_debuglink_crc32): Ditto.
3519 * varobj.c (variable_language): Ditto.
3521 * linux-tdep.c (linux_get_siginfo_type): Stop memory leak.
3523 2011-03-04 Michael Snyder <msnyder@vmware.com>
3525 * linux-fork.c (inferior_call_waitptid): Fix copy/paste error.
3527 * symfile.c (simple_overlay_update): Check for null return value
3528 from lookup_minimal_symbol.
3530 * xml-syscall.c (syscall_start_syscall): Assert name is non null.
3532 2011-03-04 Thiago Jung Bauermann <bauerman@br.ibm.com>
3534 * eval.c (parse_and_eval_address_1): Remove function.
3535 * linespec.c (decode_indirect): Call parse_to_comma_and_eval
3536 instead of parse_and_eval_address_1.
3537 * value.h (parse_and_eval_address_1): Remove prototype.
3539 2011-03-04 Michael Snyder <msnyder@vmware.com>
3541 * remote.c (putpkt_binary): Document that case stmt falls through.
3543 2011-03-04 Thiago Jung Bauermann <bauerman@br.ibm.com>
3545 * breakpointc (print_it_typical): Move NULL check from here...
3546 (print_bp_stop_message): ... to here.
3548 2011-03-04 Michael Snyder <msnyder@msnyder-server.eng.vmware.com>
3550 * breakpoint.c (enable_command): Use break instead of continue,
3551 and fill in a missing break.
3552 (disable_command): Ditto.
3554 2011-03-04 Ulrich Weigand <ulrich.weigand@linaro.org>
3556 * inflow.c (terminal_init_inferior_with_pgrp): Copy ttystate.
3557 (terminal_save_ours): Remove misleading comment.
3558 (inflow_inferior_data_cleanup): Free ttystate.
3559 (inflow_inferior_exit): Likewise.
3560 (copy_terminal_info): Copy ttystate.
3562 * serial.c (serial_copy_tty_state): New function.
3563 * serial.h (serial_copy_tty_state): Add prototype.
3564 (struct serial_ops): Add copy_tty_state callback.
3565 * ser-base.c (ser_base_copy_tty_state): New function.
3566 * ser-base.h (ser_base_copy_tty_state): Add prototype.
3567 * ser-go32.c (dos_copy_tty_state): New function.
3568 (dos_ops): Install copy_tty_state callback.
3569 * ser-mingw.c (_initialize_ser_windows): Likewise.
3570 * ser-pipe.c (_initialize_ser_pipe): Likewise.
3571 * ser-unix.c (hardwire_copy_tty_state): New function.
3572 (_initialize_ser_hardwire): Install it.
3574 2011-03-04 Michael Snyder <msnyder@vmware.com>
3576 * breakpoint.c (create_breakpoint): Add missing break statement.
3578 Reverting this patch:
3579 * infcall.c (call_function_by_hand): Add break statements for lint.
3581 Reverting this patch:
3582 * cli/cli-script.c (script_from_file): Add break for lint.
3584 2011-03-04 Michael Snyder <msnyder@vmware.com>
3586 * solib.c (reload_shared_libraries_1): Close memory leak.
3588 2011-03-03 Tom Tromey <tromey@redhat.com>
3591 * dwarf2read.c (process_psymtab_comp_unit): Handle case where
3594 2011-03-03 Michael Snyder <msnyder@vmware.com>
3596 * remote-fileio.c (remote_fileio_func_fstat): Initialize all
3597 fields of struct 'st' to zero.
3599 * tui/tui-winsource.c (tui_update_source_window_as_is): Initialize
3600 sal.pspace before calling set_current_source_symtab_and_line.
3602 2011-03-03 Yao Qi <yao@codesourcery.com>
3604 * Makefile.in (configure-common): Remove. Let Makefile
3605 in dir common to rebuild itself.
3606 (common/Makefile): Likewise.
3608 2011-03-03 Joel Brobecker <brobecker@adacore.com>
3610 * utils.c (parse_escape): Add i18n markup in error message.
3612 2011-03-03 Yao Qi <yao@codesourcery.com>
3614 * gdb/arm-tdep.c (shifted_reg_val): Replace magic number 15 with
3616 (thumb_get_next_pc_raw, arm_get_next_pc_raw): Likewise.
3617 (displaced_write_reg, displaced_read_reg): Likewise.
3618 (copy_ldr_str_ldrb_strb, cleanup_block_load_all): Likewise.
3619 (cleanup_block_load_pc, copy_block_xfer): Likewise.
3620 (cleanup_branch): Replace magic number 14 and 15 with
3621 ARM_LR_REGNUM and ARM_PC_REGNUM respectively.
3623 2011-03-02 Michael Snyder <msnyder@vmware.com>
3625 * maint.c (maintenance_do_deprecate): No need to check for NULL.
3627 * cli/cli-script.c (script_from_file): Add break for lint.
3629 * mdebugread.c (parse_partial_symbols): Fix indent.
3631 * target-descriptions.c (tdesc_gdb_type): No need to call
3632 xstrdup, callee saves a copy.
3634 * printcmd.c (print_scalar_formatted): Use strncpy for safety.
3636 * infcall.c (call_function_by_hand): Add break statements for lint.
3638 * utils.c (parse_escape): Escape the escape char.
3640 * python/py-inferior.c (build_inferior_list): Error out if
3641 PyList_Append fails.
3642 (gdbpy_inferiors): Error out if build_inferior_list fails.
3644 * linux-nat.c (linux_nat_xfer_partial): Preserve errno around
3647 * record.c (record_restore): Move printf to before error return.
3649 2011-03-02 Yao Qi <yao@codesourcery.com>
3651 * arm-tdep.h (struct displaced_step_closure): Add two new fields
3652 is_thumb and insn_size.
3653 * arm-tdep.c (displaced_read_reg): Adjust correct pipeline offset
3654 on both ARM and Thumb mode.
3655 (arm_process_displaced_insn): Set is_thumb and insn_size.
3656 (arm_displaced_init_closure): Handle both 16-bit and 32-bit.
3657 (arm_displaced_step_fixup): Likewise.
3659 2011-03-01 Michael Snyder <msnyder@vmware.com>
3661 * cli/cli-dump.c (dump_bfd_file): Check error return and warn.
3663 * jv-lang.c (evaluate_subexp_java): Conditional can't be true.
3665 * dwarf2read.c (dwarf2_compute_name): NAME cannot be null here.
3667 * cli/cli-dump.c (restore_binary_file): Validate ftell return value.
3669 * ada-lang.c (ada_make_symbol_completion_list): Replace malloc
3672 * ada-lang.c (aggregate_assign_others): Rename inner scope variable
3673 which shadows function parameter.
3675 * tracepoint.c (create_tsv_from_upload): Superfluous call
3676 to xstrdup. Callee already calls xstrdup.
3678 * linespec.c (decode_line_1): Remove unnecessary null check.
3680 * tracepoint.c (scope_info): Fix mem leak, remove underused
3683 * python/py-prettyprint.c (apply_val_pretty_printer): Remove
3684 superfluous null check.
3686 * std-regs.c (value_of_builtin_frame_pc_reg): Frame can't be null.
3687 (value_of_builtin_frame_fp_reg): Ditto.
3689 * event-top.c (display_gdb_prompt): Remove superfluous null check.
3691 * python/py-prettyprint.c (apply_val_pretty_printer): VAL may
3694 * linespec.c (decode_line_1): Check for null before dereference.
3696 * reverse.c (record_restore): Move null-check to before pointer
3699 * python/py-utils.c (gdbpy_obj_to_string): Delete unused variable.
3701 * objc-lang.c (selectors_info): Add explanitory comment.
3702 (classes_info): Ditto.
3704 2011-03-01 Ulrich Weigand <ulrich.weigand@linaro.org>
3706 * arm-linux-tdep.c (ARM_LDR_PC_SP_4): Add define.
3707 (arm_linux_restart_syscall_init): Handle both on-stack and in-kernel
3708 versions of the trampoline. Handle Thumb vs. ARM addresses.
3709 (arm_kernel_linux_restart_syscall_tramp_frame): New global.
3710 (arm_linux_init_abi): Install it.
3711 * arm-tdep.c (arm_psr_thumb_bit): Make global.
3712 * arm-tdep.c (arm_psr_thumb_bit): Add prototype.
3714 2011-02-28 Michael Snyder <msnyder@vmware.com>
3716 * ui-out.c (ui_out_field_core_addr): Make local char buffer
3717 a little bigger, to avoid possibility of an overflow.
3719 * breakpoint.c (breakpoint_adjustment_warning): Make local char
3720 buffers a little bigger, to avoid possibility of an overflow.
3722 * coffread.c (coff_getfilename): Add check to avoid overflow.
3724 * objc-lang.c (selectors_info): Add a small safety margin to
3726 (classes_info): Error out on too long REGEXP.
3728 * infrun.c (handle_inferior_event): Remove unused function call.
3730 * fork-child.c (fork_inferior): Remove ifdef'd code and
3733 * linux-thread-db.c (attach_thread): Discard unused value.
3735 * linux-nat.c (linux_handle_extended_wait): Delete unused variable.
3737 * remote.c (remote_get_noisy_reply): Discard unused value.
3738 (remote_vcont_resume): Ditto.
3739 (remote_stop_ns): Ditto.
3741 * linespec.c (decode_objc): Delete unused variable.
3743 * tui/tui-regs.c (tui_register_format): Delete unused variable.
3745 * dwarf2read.c (add_partial_symbol): Discard unused values.
3746 (read_base_type): Delete unused variable.
3748 * dbxread.c (read_dbx_symtab): Discard unused value.
3750 * eval.c (evaluate_subexp_standard): Delete unused variable,
3751 and discard unused values.
3753 * infcmd.c (_initialize_infcmd): Discard unused values.
3755 * stabsread.c (rs6000_builtin_type): Missing break statement.
3757 * dbxread.c (process_one_symbol): Discard unused value.
3759 * coffread.c (coff_end_symtab): Delete unused variable.
3761 * dwarf2read.c (dw2_get_file_names): Discard unused value.
3762 (dwarf2_add_typedef): Delete unused variable.
3763 (read_namespace): Ditto.
3764 (dwarf_decode_macros): Ditto.
3766 * m2-lang.c (evaluate_subexp_modula2): Discard unused variable.
3768 * opencl-lang.c (evaluate_subexp_opencl): Discard unused value.
3770 * p-valprint.c (pascal_val_print): Discard unused value.
3772 * utils.c (nquery): Call va_end before return;
3776 * proc-service.c (ps_plog): Call va_end before return.
3778 2011-02-28 Tom Tromey <tromey@redhat.com>
3780 * python/python.c (gdbpy_value_cst): New global.
3781 (_initialize_python): Initialize it.
3782 * python/python-internal.h (gdbpy_value_cst): Declare.
3783 * python/py-value.c (convert_value_from_python): Use
3786 2011-02-28 Michael Snyder <msnyder@vmware.com>
3788 * python/py-cmd.c (cmdpy_init): Fix memory leak.
3790 * breakpoint.c (catch_syscall_completer): Free malloced list.
3792 * jv-lang.c (java_primitive_type_from_name): Add missing break.
3794 * opencl-lang.c (lval_func_check_validity): Rename inner variables.
3795 (lval_func_check_synthetic_pointer): Ditto.
3796 (lval_func_free_closure): Fix use-after-free.
3798 2011-02-28 Tom Tromey <tromey@redhat.com>
3800 * psymtab.c (expand_partial_symbol_tables): Use
3801 ALL_OBJFILE_PSYMTABS.
3803 2011-02-28 Jan Kratochvil <jan.kratochvil@redhat.com>
3805 * objc-lang.c (selectors_info): Error on too long REGEXP.
3807 2011-02-28 Michael Snyder <msnyder@vmware.com>
3809 * python/py-param.c (set_parameter_value): Add missing
3812 * linux-record.c (record_linux_system_call): Add missing
3815 2011-02-28 Ulrich Weigand <uweigand@de.ibm.com>
3817 * breakpoint.c (print_one_breakpoint_location): Remove unused
3818 argument PRINT_ADDRESS_BITS. Update callers.
3819 (print_one_breakpoint): Likewise.
3821 2011-02-28 Ulrich Weigand <uweigand@de.ibm.com>
3823 * breakpoint.c (wrap_indent_at_field): New function.
3824 (print_breakpoint_location): Use it instead of WRAP_INDENT argument.
3825 Allocate ui_stream locally instead of using STB argument.
3826 (print_one_breakpoint_location): Update call.
3827 * ui-out.c (ui_out_query_field): New function.
3828 * ui-out.h (ui_out_query_field): Add prototype.
3830 2011-02-28 Joel Brobecker <brobecker@adacore.com>
3832 From Michael Snyder <msnyder@vmware.com>
3833 * ada-exp.y (write_object_renaming): Add FALLTHROUGH comment.
3835 2011-02-27 Michael Snyder <msnyder@vmware.com>
3837 * objc-lang.c (selectors_info): Prevent string overrun.
3839 * tui/tui-stack.c (tui_get_function_from_frame): Fix off by one
3842 * symtab.c (rbreak_command): Move variable 'file_name' to
3845 * d-valprint.c (dynamic_array_type): Avoid shadowing a function
3846 param with a local variable of the same name.
3848 2011-02-27 Michael Snyder <msnyder@vmware.com>
3850 * value.c (value_from_history_ref): New function.
3851 * value.h (value_from_history_ref): Export.
3852 * cli/cli-utils.c (get_number_trailer): Use value_from_history_ref
3853 to parse value history references.
3854 * cli/cli-utils.h (get_number_trailer): Update comment.
3856 2011-02-27 Michael Snyder <msnyder@vmware.com>
3858 * inferior.c (detach_inferior_command): Use get_number_or_range.
3859 (kill_inferior_command): Ditto.
3860 (remove_inferior_command): Ditto.
3861 (initialize_inferiors): Make command names plural.
3862 Update help strings.
3864 2011-02-27 Michael Snyder <msnyder@vmware.com>
3866 * darwin-nat-info.c: Fix comment typo.
3867 * dwarf2expr.h: Ditto.
3868 * fbsd-nat.c: Ditto.
3869 * fbsd-nat.h: Ditto.
3870 * frame-unwind.h: Ditto.
3872 * hppa-hpux-tdep.c: Ditto.
3873 * i386-linux-nat.c: Ditto.
3874 * linux-nat.c: Ditto.
3875 * nbsd-nat.c: Ditto.
3876 * nbsd-nat.h: Ditto.
3877 * ppc-linux-tdep.c: Ditto.
3880 * tui/tui-winsource.c: Ditto.
3882 2011-02-26 Michael Snyder <msnyder@vmware.com>
3884 * breakpoint.c (reattach_breakpoints): Avoid resource leak (ui_file).
3886 * maint.c (maintenance_do_deprecate): Plug a memory leak.
3888 * dwarf2loc.c (insert_bits): Avoid shadowing a function param
3889 with a local variable of the same name.
3891 * i387-tdep.c (i387_supply_fxsave): Avoid shadowing a function
3892 param with a local variable of the same name.
3893 (i387_supply_xsave): Ditto.
3895 * linux-low.c (linux_nat_xfer_osdata): Rename local variable so
3896 that it does not shadow a function parameter.
3898 * i386-nat.c (i386_length_and_rw_bits): Document that case
3899 statement is meant to fall through.
3901 * expprint.c (dump_subexp_body_standard): Document that case
3902 statement is meant to fall through.
3904 * amd64-linux-tdep.c (amd64_linux_syscall_record): Delete
3905 dead if statement. Condition can't be false.
3907 2011-02-25 Michael Snyder <msnyder@vmware.com>
3909 * arm-tdep.c: Fix typos in comments.
3910 * bsd-uthread.c: Ditto.
3911 * completer.c: Ditto.
3913 * cp-namespace.c: Ditto.
3914 * cp-support.c: Ditto.
3915 * cris-tdep.c: Ditto.
3917 * dwarf2read.c: Ditto.
3919 * gdbtypes.h: Ditto.
3920 * inferior.h: Ditto.
3921 * mdebugread.c: Ditto.
3922 * mips-tdep.c: Ditto.
3923 * ppc-linux-nat.c: Ditto.
3924 * ppc-linux-tdep.c: Ditto.
3925 * printcmd.c: Ditto.
3926 * sol-thread.c: Ditto.
3927 * solib-frv.c: Ditto.
3929 * sparc64-tdep.c: Ditto.
3930 * spu-tdep.c: Ditto.
3931 * stabsread.c: Ditto.
3936 * python/py-block.c: Ditto.
3937 * python/py-symbol.c: Ditto.
3938 * python/py-symtab.c: Ditto.
3939 * python/py-value.c: Ditto.
3940 * tui/tui-win.c: Ditto.
3942 2011-02-25 Michael Snyder <msnyder@vmware.com>
3944 * inferior.c (print_inferior): Accept a string instead of an int
3945 for requested_inferiors, and use get_number_or_range to parse it.
3946 (info_inferiors_command): Pass args string to print_inferior.
3947 (initialize_inferiors): Change help string for info inferiors.
3948 * inferior.h (print_inferior): Export prototype change.
3950 2011-02-25 Tom Tromey <tromey@redhat.com>
3952 * common/ax.def (invalid2): Set to 0x31.
3954 2011-02-25 Jan Kratochvil <jan.kratochvil@redhat.com>
3956 * dwarf2loc.c (disassemble_dwarf_expression) <DW_OP_breg[0-9]+>: Use
3958 (disassemble_dwarf_expression) <DW_OP_bregx>: Drop variable offset,
3960 (disassemble_dwarf_expression) <DW_OP_fbreg>: Use L and plongest.
3962 2011-02-24 Michael Snyder <msnyder@vmware.com>
3964 * Makefile.in (clean): Make clean should remove generated files
3965 observer.h and observer.inc.
3967 2011-02-24 Joel Brobecker <brobecker@adacore.com>
3969 Revert the following patch (not approved yet):
3970 2011-02-21 Hui Zhu <teawater@gmail.com>
3971 * Makefile.in (HFILES_NO_SRCDIR): Add printcmd.h.
3972 * ax-gdb.c (gen_printf_expr_callback): New function.
3973 * ax-gdb.h (gen_printf_expr_callback): Forward declare.
3974 * ax-general.c (ax_memcpy): New function.
3975 (ax_print): Handle "printf".
3977 * ax.h (ax_memcpy): Forward declare.
3978 * common/ax.def (invalid2): Removed.
3979 (printf): New entry.
3980 * printcmd.c (printcmd.h): New include.
3981 (string_printf): New function.
3982 (ui_printf): Removed.
3983 (printf_command): Remove static. Call string_printf.
3984 (eval_command): Call string_printf.
3985 * printcmd.h: New file.
3986 * tracepoint.c (validate_actionline,
3987 encode_actions_1): handle printf_command.
3989 2011-02-23 Tom Tromey <tromey@redhat.com>
3991 * ax-general.c (ax_pick): Add missing newline.
3993 2011-02-23 Michael Snyder <msnyder@vmware.com>
3995 * breakpoint.c (breakpoint_1): Change first argument from an int
3996 to a char pointer, so that the function now accepts a list of
3997 breakpoints rather than just one. Use new function
3998 'number_is_in_list' to implement.
3999 (breakpoints_info): Pass char * instead of int to breakpoint_1.
4000 (watchpoints_info): Ditto.
4001 (tracepoints_info): Ditto.
4002 (maintenance_info_breakpoints): Ditto.
4003 (_initialize_breakpoint): Update help strings to reflect the fact
4004 that these functions can now take more than one argument.
4005 * cli/cli-utils.c (number_is_in_list): New function.
4006 * cli/cli-utils.h (number_is_in_list): Export.
4008 2011-02-23 Michael Snyder <msnyder@vmware.com>
4010 * memattr.c (mem_enable_command): Use get_number_or_range.
4011 (mem_disable_command): Ditto.
4012 (mem_delete_command): Ditto.
4013 (_initialize_mem): Tweak usage message to reflect multiple
4016 2011-02-22 Doug Evans <dje@google.com>
4018 Add gdb.lookup_global_symbol python function.
4020 * python/py-symbol.c (gdbpy_lookup_global_symbol): New function.
4021 * python/python-internal.h (gdbpy_lookup_global_symbol): Declare it.
4022 * python/python.c (GdbMethods): Add entry for lookup_global_symbol.
4024 2011-02-22 Tom Tromey <tromey@redhat.com>
4026 * language.c (language_class_name_from_physname): Rename
4027 'curr_language' argument to 'lang'; use in body.
4029 2011-02-22 Michael Snyder <msnyder@vmware.com>
4031 * cli/cli-utils.c (number_is_in_list): Check for zero return.
4033 2011-02-22 Pedro Alves <pedro@codesourcery.com>
4035 * frame-unwind.h: Fix comment to mention the this frame, not the
4038 2011-02-22 Tom Tromey <tromey@redhat.com>
4040 * symfile.c (auto_solib_limit): Remove.
4041 * symfile.h (auto_solib_limit): Remove.
4043 2011-02-22 Joel Brobecker <brobecker@adacore.com>
4045 * Makefile.in (INSTALLED_LIBS): Delete. Update comment.
4047 2011-02-21 Michael Snyder <msnyder@vmware.com>
4049 * gdbthread.h (print_thread_info): Change prototype.
4050 * thread.c (print_thread_info): Accept char* instead of int for
4051 requested_threads argument. Use new function number_is_in_list
4052 to determine which threads to list.
4053 (info_threads_command): Pass char* to print_thread_info.
4054 * cli/cli-utils.c (number_is_in_list): New function.
4055 * cli/cli-utils.h (number_is_in_list): Export.
4056 * mi/mi-main.c (mi_cmd_thread_info): Pass char* to
4058 (print_one_inferior): Ditto.
4059 (mi_cmd_list_thread_groups): Ditto.
4061 2011-02-21 Jan Kratochvil <jan.kratochvil@redhat.com>
4063 * common/Makefile.in (CFLAGS): New.
4064 (COMPILE): Add $(CFLAGS).
4066 2011-02-21 Tom Tromey <tromey@redhat.com>
4068 * breakpoint.c (catch_syscall_command_1): Fix typo.
4070 2011-02-21 Tom Tromey <tromey@redhat.com>
4072 * reverse.c: Include cli-utils.h.
4073 * printcmd.c: Include cli-utils.h.
4074 (string_printf): Use skip_spaces.
4075 * cli/cli-utils.h: New file.
4076 * cli/cli-utils.c: New file.
4077 * cli/cli-dump.h (skip_spaces): Move to cli-utils.h.
4078 * cli/cli-dump.c (skip_spaces): Move to cli-utils.c.
4079 * breakpoint.h (get_number, get_number_or_range): Move to
4081 * breakpoint.c: Include cli-utils.h.
4082 (get_number_trailer, get_number, get_number_or_range)
4083 (ep_skip_leading_whitespace): Move to cli-utils.c.
4084 (create_breakpoint_sal, find_condition_and_thread)
4085 (decode_static_tracepoint_spec, watch_command_1)
4086 (watch_maybe_just_location, ep_parse_optional_if_clause)
4087 (catch_fork_command_1, catch_exec_command_1)
4088 (catch_syscall_command_1): Use skip_spaces, skip_to_space.
4089 * Makefile.in (SUBDIR_CLI_OBS): Add cli-utils.o.
4090 (SUBDIR_CLI_SRCS): Add cli-utils.c.
4091 (HFILES_NO_SRCDIR): Add cli-utils.h.
4092 (cli-utils.o): New target.
4094 2011-02-18 Pierre Muller <muller@ics.u-strasbg.fr>
4096 * remote.c (remote_close): Reset INFERIOR_PTID to NULL_PTID
4097 before calling discard_all_inferiors.
4099 2011-02-21 Ulrich Weigand <uweigand@de.ibm.com>
4101 * opencl-lang.c (STRUCT_OCL_TYPE): Remove.
4102 (struct builtin_opencl_type): Remove.
4103 (builtin_opencl_type): Change return type to "struct type **".
4104 (lookup_opencl_vector_type): Update caller.
4105 (opencl_language_arch_info): Copy primitive type vector from gdbarch.
4106 (build_opencl_types): Install plain array of "struct type *"
4107 instead of "struct builtin_opencl_type".
4109 2011-02-21 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
4110 Ulrich Weigand <uweigand@de.ibm.com>
4112 * arm-linux-nat.c: Include "observer.h" and "gdbthread.h".
4113 (PTRACE_GETHBPREGS, PTRACE_SETHBPREGS): Define.
4114 (struct arm_linux_hwbp_cap): New type.
4115 (arm_linux_get_hwbp_cap): New function.
4116 (arm_linux_get_hw_breakpoint_count): Likewise.
4117 (arm_linux_get_hw_watchpoint_count): Likewise.
4118 (arm_linux_can_use_hw_breakpoint): Likewise.
4119 (arm_hwbp_type): New type.
4120 (arm_hwbp_control_t): Likewise.
4121 (struct arm_linux_hw_breakpoint): Likewise.
4122 (struct arm_linux_thread_points): Likewise.
4123 (arm_threads): New global variable.
4124 (arm_linux_find_breakpoints_by_tid): New function.
4125 (arm_hwbp_control_initialize): Likewise.
4126 (arm_hwbp_control_is_enabled): Likewise.
4127 (arm_hwbp_control_disable): Likewise.
4128 (arm_linux_hw_breakpoint_initialize): Likewise.
4129 (arm_linux_get_hwbp_type): Likewise.
4130 (arm_linux_hw_watchpoint_initialize): Likewise.
4131 (arm_linux_hw_breakpoint_equal): Likewise.
4132 (arm_linux_insert_hw_breakpoint1): Likewise.
4133 (arm_linux_remove_hw_breakpoint1): Likewise.
4134 (arm_linux_insert_hw_breakpoint): Likewise.
4135 (arm_linux_remove_hw_breakpoint): Likewise.
4136 (arm_linux_region_ok_for_hw_watchpoint): Likewise.
4137 (arm_linux_insert_watchpoint): Likewise.
4138 (arm_linux_remove_watchpoint): Likewise.
4139 (arm_linux_stopped_data_address): Likewise.
4140 (arm_linux_stopped_by_watchpoint): Likewise.
4141 (arm_linux_watchpoint_addr_within_range): Likewise.
4142 (arm_linux_new_thread): Likewise.
4143 (arm_linux_thread_exit): Likewise.
4144 (_initialize_arm_linux_nat): Install hardware breakpoint/watchpoint
4145 related target callbacks. Register arm_linux_new_thread and
4146 arm_linux_thread_exit.
4147 * arm-tdep.h (arm_pc_is_thumb): Add prototype.
4148 * arm-tdep.c (arm_pc_is_thumb): Make global.
4149 (arm_gdbarch_init): Call set_gdbarch_have_nonsteppable_watchpoint.
4151 2011-02-21 Ulrich Weigand <uweigand@de.ibm.com>
4153 * breakpoint.c (update_watchpoint): Do not attempt to recreate
4154 per-frame locations while within a function epilogue.
4156 2011-02-21 Pierre Muller <muller@ics.u-strasbg.fr>
4158 * ser-mingw.c (ser_windows_close): Reformat comment to better conform
4159 to GNU coding standards.
4161 2011-02-21 Pierre Muller <muller@ics.u-strasbg.fr>
4163 Allow use of mingw native on Windows 95 OS.
4164 * ser-mingw.c (CancelIo): New macro for dynamically loaded DLL entry.
4165 (ser_windows_close): Only call CancelIo if function exists.
4166 (_initialize_ser_windows): Use LoadLirary/GetProcAddress
4167 to check for existence of CancelIo function in kernel32 DLL.
4169 2011-02-21 Hui Zhu <teawater@gmail.com>
4171 * Makefile.in (HFILES_NO_SRCDIR): Add printcmd.h.
4172 * ax-gdb.c (gen_printf_expr_callback): New function.
4173 * ax-gdb.h (gen_printf_expr_callback): Forward declare.
4174 * ax-general.c (ax_memcpy): New function.
4175 (ax_print): Handle "printf".
4177 * ax.h (ax_memcpy): Forward declare.
4178 * common/ax.def (invalid2): Removed.
4179 (printf): New entry.
4180 * printcmd.c (printcmd.h): New include.
4181 (string_printf): New function.
4182 (ui_printf): Removed.
4183 (printf_command): Remove static. Call string_printf.
4184 (eval_command): Call string_printf.
4185 * printcmd.h: New file.
4186 * tracepoint.c (validate_actionline,
4187 encode_actions_1): handle printf_command.
4189 2011-02-19 Michael Snyder <msnyder@vmware.com>
4191 * reverse.c (delete_one_bookmark): Argument is now bookmark
4192 id rather than pointer to bookmark struct.
4193 (delete_bookmark_command): Use get_number_or_range.
4194 (goto_bookmark_command): Parse with get_number instead of strtoul.
4195 (bookmark_1): New function. Print info for one bookmark.
4196 (bookmarks_info): Use get_number_or_range and bookmark_1.
4198 2011-02-18 Michael Snyder <msnyder@vmware.com>
4200 * thread.c (info_threads_command): Re-implement using
4201 get_number_or_range.
4202 (thread_apply_command): Ditto.
4204 2011-02-18 Tom Tromey <tromey@redhat.com>
4206 * common/ax.def: New file.
4207 * ax.h (enum agent_op): Use ax.def.
4208 * ax-general.c (aop_map): Use ax.def.
4210 2011-02-18 Tom Tromey <tromey@redhat.com>
4212 * ax-general.c (aop_map): Add pick and rot.
4213 * dwarf2loc.c (compile_dwarf_to_ax) <DW_OP_over>: Reimplement.
4214 <DW_OP_rot>: Implement.
4215 * ax.h (enum agent_op) <aop_pick, aop_rot>: New constants.
4217 * ax-general.c (ax_pick): New function.
4219 2011-02-18 Tom Tromey <tromey@redhat.com>
4221 * Makefile.in (HFILES_NO_SRCDIR): Don't mention ada-operator.inc.
4223 2011-02-18 Jan Kratochvil <jan.kratochvil@redhat.com>
4224 Tom Tromey <tromey@redhat.com>
4226 * cp-support.c (make_symbol_overload_list_namespace): Do not call
4227 make_symbol_overload_list_block with NULL BLOCK.
4228 * valarith.c (unop_user_defined_p): Resolve also TYPE_CODE_TYPEDEF.
4230 2011-02-18 Pedro Alves <pedro@codesourcery.com>
4232 * breakpoint.c (get_number_trailer): No longer accept a NULL PP.
4233 * breakpoint.h (get_number_or_range): Declare.
4234 * printcmd.c (ALL_DISPLAYS): Declare.
4235 (delete_display): Reimplement taking a display pointer.
4236 (undisplay_command): Accept a range of displays to delete, using
4237 get_number_or_range.
4239 2011-02-18 Pierre Muller <muller@ics.u-strasbg.fr>
4241 * c-valprint.c (c_val_print): Add embedded_offset to address
4242 for arrays of unspecified length.
4243 * p-valprint.c (pascal_val_print): Likewise.
4245 2011-02-18 Yao Qi <yao@codesourcery.com>
4247 * gdb/arm-tdep.c (arm_displaced_step_copy_insn): Move code to ...
4248 (arm_process_displaced_insn): .. here. Remove parameter INSN.
4249 (thumb_process_displaced_insn): New.
4250 * gdb/arm-linux-tdep.c (arm_linux_displaced_step_copy_insn): Update
4251 call to arm_process_displaced_insn.
4252 * gdb/arm-tdep.h : Update declaration of arm_process_displaced_insn.
4254 2011-02-17 Tom Tromey <tromey@redhat.com>
4256 * dwarf2loc.h (dwarf2_compile_expr_to_ax): Declare.
4257 * dwarf2loc.c (dwarf2_compile_expr_to_ax): Rename from
4258 compile_dwarf_to_ax. No longer static. Call
4259 dwarf2_compile_cfa_to_ax.
4260 (locexpr_tracepoint_var_ref): Update.
4261 (loclist_tracepoint_var_ref): Update.
4262 * dwarf2-frame.h (dwarf2_compile_cfa_to_ax): Declare.
4263 * dwarf2-frame.c (execute_cfa_program): Remove 'this_frame'
4264 argument; add 'gdbarch' and 'pc'.
4265 (dwarf2_compile_cfa_to_ax): New function.
4266 (dwarf2_frame_cache): Update.
4268 2011-02-17 Joel Brobecker <brobecker@adacore.com>
4270 * ada-lang.c (ada_type_of_array): Fix the size of the array
4271 in the case of an unconstrained packed array.
4273 2011-02-17 Yao Qi <yao@codesourcery.com>
4275 * common/Makefile.in: Add more targets for make.
4277 2011-02-16 Tom Tromey <tromey@redhat.com>
4279 * dwarf2loc.c (unimplemented): Fix typo.
4281 2011-02-16 Tom Tromey <tromey@redhat.com>
4283 * dwarf2loc.c (unimplemented): Handle unnamed opcodes.
4284 (compile_dwarf_to_ax) <default>: Use unimplemented.
4285 <DW_OP_deref>: Update.
4286 (disassemble_dwarf_expression): Update.
4287 * dwarf2read.c (dwarf_stack_op_name): Remove 'def' argument.
4288 (decode_locdesc): Update.
4289 * dwarf2expr.h (dwarf_stack_op_name): Update.
4291 2011-02-16 Tom Tromey <tromey@redhat.com>
4293 * ax.h (struct aop_map) <name>: Now const.
4295 2011-02-16 Tom Tromey <tromey@redhat.com>
4297 * ax-gdb.c.c (gen_expr) <UNOP_MEMVAL>: Handle value kinds other
4300 2011-02-16 Yao Qi <yao@codesourcery.com>
4302 * infrun.c (get_displaced_step_closure_by_addr): New.
4303 * inferior.h: Declare it.
4304 * arm-tdep.c: (arm_pc_is_thumb): Call
4305 get_displaced_step_closure_by_addr. Adjust MEMADDR if it
4308 2011-02-16 Pedro Alves <pedro@codesourcery.com>
4309 Jan Kratochvil <jan.kratochvil@redhat.com>
4312 * tracepoint.c (memrange_sortmerge): Fix list A's end calculation.
4314 2011-02-16 Pedro Alves <pedro@codesourcery.com>
4315 Jan Kratochvil <jan.kratochvil@redhat.com>
4317 * value.c (value_contents_copy_raw): Extend describing comment.
4318 Assert that the destination contents we're overwriting are wholly
4320 (value_contents_copy): Extend describing comment.
4322 2011-02-16 Pedro Alves <pedro@codesourcery.com>
4323 Jan Kratochvil <jan.kratochvil@redhat.com>
4325 * value.c (value_available_contents_eq): Remove redundant local
4326 variables. Fix available contents comparision.
4327 * value.h (value_available_contents_eq): Extend describing
4330 2011-02-16 Yao Qi <yao@codesourcery.com>
4332 * thread.c (info_threads_command): Add missing i18n markup and remove
4335 2011-02-15 Paul Pluzhnikov <ppluzhnikov@google.com>
4337 * breakpoint.c (longjmp_names): New variable.
4338 (struct breakpoint_objfile_data): New type.
4339 (breakpoint_objfile_key): New variable.
4340 (msym_not_found): New variable.
4341 (msym_not_found_p): New predicate.
4342 (get_breakpoint_objfile_data): New function.
4343 (create_overlay_event_breakpoint): Check per-objfile cache for
4345 (create_longjmp_master_breakpoint): Likewise.
4346 (create_std_terminate_master_breakpoint): Likewise.
4347 (create_exception_master_breakpoint): Likewise.
4348 (_initialize_breakpoint): Register per-objfile data key.
4350 2011-02-15 Paul Pluzhnikov <ppluzhnikov@google.com>
4352 * breakpoint.c ((create_overlay_event_breakpoint): Const-propagate
4354 (create_longjmp_master_breakpoint): Loop over longjmp names.
4355 (create_std_terminate_master_breakpoint): Const-propagate parameter
4357 (update_breakpoints_after_exec): Adjust.
4358 (breakpoint_re_set): Adjust.
4360 2011-02-15 Michael Snyder <msnyder@vmware.com>
4362 * thread.c (info_threads_command): Process arg as thread id,
4363 or list of thread ids.
4364 (thread_find_command): New command.
4365 (_initialize_thread): Document argument for info threads.
4366 Document 'thread find' command.
4367 * NEWS: Document new command "thread find".
4369 2011-02-15 Jan Kratochvil <jan.kratochvil@redhat.com>
4371 * Makefile.in (ACLOCAL_AMFLAGS): Add `-I ../config'.
4372 * aclocal.m4: Regenerated with aclocal-1.11.1.
4373 * common/configure: Regenerate with autoconf-2.64.
4375 2011-02-15 Ken Werner <ken.werner@de.ibm.com>
4377 * opencl-lang.c (build_opencl_types): Set the size of the built-in
4378 bool data type to a size of one byte.
4380 2011-02-15 Pedro Alves <pedro@codesourcery.com>
4381 Jan Kratochvil <jan.kratochvil@redhat.com>
4383 * target.c (memory_xfer_live_readonly_partial): Document where to
4384 look for interface description.
4386 2011-02-15 Yao Qi <yao@codesourcery.com>
4389 * arm-tdep.c (copy_ldr_str_ldrb_strb): Replace PC with SP in
4390 order to store PC value on stack instead of text section.
4392 2011-02-15 Thiago Jung Bauermann <bauerman@br.ibm.com>
4394 * rs6000-tdep.c (IS_EFP_PSEUDOREG): Use correct constant for
4395 the EFP register set size.
4396 (efpr_pseudo_register_read): Use regcache_raw_read_part to read
4397 data from the VMX register.
4398 (efpr_pseudo_register_write): Use regcache_raw_write_part to read
4399 and write data from/to the VMX register.
4401 2011-02-14 Michael Snyder <msnyder@vmware.com>
4403 * command.h (enum command_class): New class 'no_set_class', for
4404 "show" commands without a corresponding "set" command.
4405 * value.c (_initialize_values): Use 'no_set_class' for "show values".
4406 * copying.c (_initialize_copying): Ditto for "show copying" and
4408 * cli/cli-cmds.c (init_cli_cmds): Ditto for "show commands" and
4410 * cli/cli-setshow.c (cmd_show_list): Skip "show" commands for
4411 which there is no corresponding "set" command (eg. "show copying").
4413 2011-02-14 Pedro Alves <pedro@codesourcery.com>
4414 Jan Kratochvil <jan.kratochvil@redhat.com>
4416 * exec.c (section_table_available_memory): Change `len' parameter
4418 * exec.h (section_table_available_memory): Ditto.
4419 * value.h (read_value_memory): Rename the `offset' parameter to
4422 2011-02-14 Pedro Alves <pedro@codesourcery.com>
4423 Jan Kratochvil <jan.kratochvil@redhat.com>
4425 * memrange.c (compare_mem_ranges): Mention sort order in
4427 (normalize_mem_ranges): Add comment. Fix ra->length calculation.
4428 * tracepoint.c (traceframe_available_memory): Extend comment to
4429 mention what happens to RESULT when the target does not support
4432 2011-02-14 Pedro Alves <pedro@codesourcery.com>
4433 Jan Kratochvil <jan.kratochvil@redhat.com>
4435 * value.c (mark_value_bytes_unavailable): Fix indexing the `bef'
4438 2011-02-14 Pedro Alves <pedro@codesourcery.com>
4440 * value.c (value_bits_valid, value_bits_synthetic_pointer):
4441 No longer handle NULL values.
4443 2011-02-14 Pedro Alves <pedro@codesourcery.com>
4445 * exceptions.h (NOT_AVAILABLE_ERROR): New error.
4446 * value.c: Include "exceptions.h".
4447 (require_available): Throw NOT_AVAILABLE_ERROR instead of a
4449 * cp-abi.c: Include gdb_assert.h.
4450 (baseclass_offset): Add `embedded_offset' and `val' parameters.
4451 Assert the method is implemented. Wrap NOT_AVAILABLE_ERROR
4453 * cp-abi.h (baseclass_offset): Add `embedded_offset' and `val'
4454 parameters. No longer returns -1 on error.
4455 (struct cp_abi_ops) <baseclass_offset>: Add `embedded_offset' and
4457 * cp-valprint.c: Include exceptions.h.
4458 (cp_print_value): Handle NOT_AVAILABLE_ERROR errors when fetching
4459 the baseclass_offset. Handle unavailable base classes. Use
4460 val_print_invalid_address.
4461 * p-valprint.c: Include exceptions.h.
4462 (pascal_object_print_value): Handle NOT_AVAILABLE_ERROR errors
4463 when fetching the baseclass_offset. No longer expect
4464 baseclass_offset returning -1. Handle unavailable base classes.
4465 Use val_print_invalid_address.
4466 * valops.c (dynamic_cast_check_1): Rename `contents' parameter to
4467 `valaddr' parameter, and change its type to gdb_byte pointer. Add
4468 `embedded_offset' and `val' parameters. Adjust.
4469 (dynamic_cast_check_2): Rename `contents' parameter to `valaddr'
4470 parameter, and change its type to gdb_byte pointer. Add
4471 `embedded_offset' and `val' parameters. Adjust. No longer expect
4472 baseclass_offset returning -1.
4473 (value_dynamic_cast): Use value_contents_for_printing rather than
4474 value_contents. Adjust.
4475 (search_struct_field): No longer expect baseclass_offset returning
4477 (search_struct_method): If reading memory from the target is
4478 necessary, wrap it in a new value to pass to baseclass_offset. No
4479 longer expect baseclass_offset returning -1.
4480 (find_method_list): No longer expect baseclass_offset returning
4481 -1. Use value_contents_for_printing rather than value_contents.
4482 * valprint.c (val_print_invalid_address): New function.
4483 * valprint.h (val_print_invalid_address): Declare.
4484 * gdbtypes.c (is_unique_ancestor_worker): New `embedded_offset'
4485 and `val' parameters. No longer expect baseclass_offset returning
4487 * gnu-v2-abi.c: Include "exceptions.h".
4488 (gnuv2_baseclass_offset): Add `embedded_offset' and `val'
4489 parameters. Handle unavailable memory. Recurse through
4490 gnuv2_baseclass_offset directly, rather than through
4491 baseclass_offset. No longer returns -1 on not found, instead
4493 * gnu-v3-abi.c (gnuv3_baseclass_offset): Add `embedded_offset' and
4494 `val' parameters. Adjust.
4496 2011-02-14 Pedro Alves <pedro@codesourcery.com>
4498 * tracepoint.c (memrange_sortmerge): Don't merge ranges that are
4499 almost but not quite adjacent.
4501 2011-02-14 Pedro Alves <pedro@codesourcery.com>
4503 * value.h (value_entirely_available): Declare.
4504 * value.c (value_entirely_available): New function.
4505 * c-valprint.c (c_value_print): Don't try fetching the pointer's
4506 real type if the pointer is unavailable.
4508 2011-02-14 Pedro Alves <pedro@codesourcery.com>
4510 * valops.c (value_repeat): Use read_value_memory instead of
4513 2011-02-14 Pedro Alves <pedro@codesourcery.com>
4515 * value.h (value_contents_copy, value_contents_copy_raw): Declare.
4516 * value.c (value_contents_copy_raw, value_contents_copy): New
4518 (value_primitive_field): Use value_contents_copy_raw instead of
4520 * valops.c (value_fetch_lazy): Use value_contents_copy instead of
4522 (value_array, value_slice): Ditto.
4523 * valarith.c (value_subscripted_rvalue): Use
4524 value_contents_copy_raw instead of memcpy.
4526 2011-02-14 Pedro Alves <pedro@codesourcery.com>
4528 <unavailable> references.
4530 * valops.c (get_value_at): Use value_from_contents_and_address,
4531 avoiding read_memory.
4533 2011-02-14 Pedro Alves <pedro@codesourcery.com>
4535 * c-valprint.c (c_val_print): Print a string with unavailable
4536 contents as an array.
4538 2011-02-14 Pedro Alves <pedro@codesourcery.com>
4540 * value.h (unpack_bits_as_long): Delete declaration.
4541 (unpack_value_bits_as_long): Declare.
4542 (unpack_value_field_as_long): Declare.
4543 (value_field_bitfield): Declare.
4544 * value.c (unpack_bits_as_long): Rename to...
4545 (unpack_value_bits_as_long_1): ... this. Add embedded_offset and
4546 value parameters. Return the extracted result in a new output
4547 parameter. If the value contents are unavailable, return false,
4548 otherwise return true.
4549 (unpack_value_bits_as_long): New.
4550 (unpack_field_as_long): Rename to...
4551 (unpack_value_field_as_long_1): ... this. Add embedded_offset and
4552 Add embedded_offset and value parameters. Return the extracted
4553 result in a new output parameter. If the value contents are
4554 unavailable, return false, otherwise return true.
4555 (unpack_value_field_as_long): New.
4556 (unpack_field_as_long_1): New.
4557 (unpack_field_as_long): Reimplement as wrapper around
4558 unpack_value_field_as_long_1.
4559 (value_field_bitfield): New function.
4560 * valops.c (value_fetch_lazy): When fetching a bitfield, use
4561 unpack_value_bits_as_long. Mark the value as unavailable, if it
4563 * jv-valprint.c (java_print_value_fields): Use
4564 value_field_bitfield.
4565 * p-valprint.c (pascal_object_print_value_fields): Use
4566 value_field_bitfield.
4567 * cp-valprint.c (cp_print_value_fields): Use value_field_bitfield.
4569 2011-02-14 Pedro Alves <pedro@codesourcery.com>
4571 * value.c (get_internalvar_integer): Also return the int value of
4572 TYPE_CODE_INT INTERNALVAR_VALUE values.
4573 (set_internalvar): Don't special case TYPE_CODE_INT.
4575 2011-02-14 Pedro Alves <pedro@codesourcery.com>
4577 * value.c (struct internalvar) <enum internalvar_kind>: Remove
4578 INTERNALVAR_POINTER.
4580 (value_of_internalvar): Remove INTERNALVAR_POINTER handling.
4581 (set_internalvar): Remove special TYPE_CODE_PTR handling.
4582 (preserve_one_internalvar): Remove INTERNALVAR_POINTER handling.
4584 2011-02-14 Pedro Alves <pedro@codesourcery.com>
4586 * value.h (value_available_contents_eq): Declare.
4587 * value.c (find_first_range_overlap): New function.
4588 (value_available_contents_eq): New function.
4589 * valprint.c (val_print_array_elements): Use
4590 value_available_contents_eq.
4591 * ada-valprint.c (val_print_packed_array_elements): Use
4592 value_available_contents_eq.
4593 * jv-valprint.c (java_value_print): Use
4594 value_available_contents_eq.
4596 2011-02-14 Pedro Alves <pedro@codesourcery.com>
4598 * target.c (target_read_live_memory): New function.
4599 (memory_xfer_live_readonly_partial): New.
4600 (memory_xfer_partial): If reading from a traceframe, fallback to
4601 reading unavailable read-only memory from read-only regions of
4603 * tracepoint.c (disconnect_tracing): Adjust.
4604 (set_current_traceframe): New, factored out from
4605 set_traceframe_number.
4606 (set_traceframe_number): Reimplement to only change the traceframe
4607 number on the GDB side.
4608 (do_restore_current_traceframe_cleanup): Adjust.
4609 (make_cleanup_restore_traceframe_number): New.
4610 (cur_traceframe_number): New global.
4611 (tfile_open): Set cur_traceframe_number to no traceframe.
4612 (set_tfile_traceframe): New function.
4613 (tfile_trace_find): If looking up a traceframe using any method
4614 other than by number, make sure the current tfile traceframe
4615 matches gdb's current traceframe. Update the current tfile
4616 traceframe if the lookup succeeded.
4617 (tfile_fetch_registers, tfile_xfer_partial)
4618 (tfile_get_trace_state_variable_value): Make sure the remote
4619 traceframe matches gdb's current traceframe.
4620 * remote.c (remote_traceframe_number): New global.
4621 (remote_open_1): Set it to -1.
4622 (set_remote_traceframe): New function.
4623 (remote_fetch_registers, remote_store_registers)
4624 (remote_xfer_memory, remote_xfer_partial)
4625 (remote_get_trace_state_variable_value): Make sure the remote
4626 traceframe matches gdb's current traceframe.
4627 (remote_trace_find): If looking up a traceframe using any method
4628 other than by number, make sure the current remote traceframe
4629 matches gdb's current traceframe. Update the current remote
4630 traceframe if the lookup succeeded.
4631 * infrun.c (fetch_inferior_event): Adjust.
4632 * tracepoint.h (set_current_traceframe): Declare.
4633 (get_traceframe_number, set_traceframe_number): Add describing
4636 2011-02-14 Pedro Alves <pedro@codesourcery.com>
4638 Mark pieces of values as unavailable if the corresponding memory
4641 * valops.c: Include tracepoint.h.
4642 (value_fetch_lazy): Use read_value_memory.
4643 (read_value_memory): New.
4644 * value.h (read_value_memory): Declare.
4645 * dwarf2loc.c (read_pieced_value): Use read_value_memory.
4646 * exec.c (section_table_available_memory): New function.
4647 * exec.h (section_table_available_memory): Declare.
4649 2011-02-14 Pedro Alves <pedro@codesourcery.com>
4651 * Makefile.in (SFILES): Add memrange.c.
4652 (HFILES_NO_SRCDIR): Add memrange.h.
4653 (COMMON_OBS): Add memrange.o.
4654 * memrange.c: New file.
4655 * memrange.h: New file.
4656 * tracepoint.c: Include memrange.h.
4657 (struct mem_range): Delete.
4658 (mem_range_s): Delete.
4659 (traceframe_available_memory): New function.
4660 * tracepoint.h (traceframe_available_memory): Declare.
4662 2011-02-14 Pedro Alves <pedro@codesourcery.com>
4664 * target.h (struct traceframe_info): Forward declare.
4665 (enum target_object): Add TARGET_OBJECT_TRACEFRAME_INFO.
4666 (struct target_ops) <to_traceframe_info>: New field.
4667 (target_traceframe_info): New.
4668 * target.c (update_current_target): Inherit and default
4670 * remote.c (PACKET_qXfer_traceframe_info): New.
4671 (remote_protocol_features): Register qXfer:traceframe-info:read.
4672 (remote_xfer_partial): Handle TARGET_OBJECT_TRACEFRAME_INFO.
4673 (remote_traceframe_info): New.
4674 (init_remote_ops): Install it.
4675 (_initialize_remote): Install "set/show remote traceframe-info"
4677 * tracepoint.h (parse_traceframe_info): Declare.
4678 * tracepoint.c (struct mem_range): New.
4679 (mem_range_s): New typedef.
4680 (struct traceframe_info): New.
4681 (traceframe_info): New global.
4682 (free_traceframe_info): New function.
4683 (clear_traceframe_info): New function.
4684 (start_tracing, tfind_1, set_traceframe_number): Clear traceframe
4686 (build_traceframe_info): New function.
4687 (tfile_traceframe_info): New function.
4688 (init_tfile_ops): Install tfile_traceframe_info.
4689 (traceframe_info_start_memory, free_result): New functions.
4690 (memory_attributes, traceframe_info_elements): New globals.
4691 (parse_traceframe_info, get_traceframe_info): New functions.
4692 * features/traceframe-info.dtd: New file.
4693 * Makefile.in (XMLFILES): Add traceframe-info.dtd.
4695 2011-02-14 Pedro Alves <pedro@codesourcery.com>
4697 Base support for <unavailable> value contents.
4699 * value.h (value_bytes_available): Declare.
4700 (mark_value_bytes_unavailable): Declare.
4701 * value.c (struct range): New struct.
4702 (range_s): New typedef.
4703 (ranges_overlap): New function.
4704 (range_lessthan): New function.
4705 (ranges_contain_p): New function.
4706 (struct value) <unavailable>: New field.
4707 (value_bytes_available): New function.
4708 (mark_value_bytes_unavailable): New function.
4709 (require_not_optimized_out): Constify parameter.
4710 (require_available): New function.
4711 (value_contents_all, value_contents): Require all bytes be
4713 (value_free): Free `unavailable'.
4714 (value_copy): Copy `unavailable'.
4715 * valprint.h (val_print_unavailable): Declare.
4716 * valprint.c (valprint_check_validity): Rename `offset' parameter
4717 to `embedded_offset'. If printing a scalar, check whether the
4718 value chunk is available.
4719 (val_print_unavailable): New.
4720 (val_print_scalar_formatted): Check whether the value is
4722 * python/py-prettyprint.c (apply_val_pretty_printer): Refuse
4723 pretty-printing unavailable values.
4725 2011-02-13 Jan Kratochvil <jan.kratochvil@redhat.com>
4727 Fix const/volatile qualifiers of C++ types, PR c++/12328.
4728 * c-typeprint.c (c_type_print_args): Update the function comment. New
4729 variable param_type, initialize it. Remove const/volatile qualifiers
4730 for language_cplus and !show_artificial. Use param_type.
4732 2011-02-13 Jan Kratochvil <jan.kratochvil@redhat.com>
4734 * symtab.c (find_pc_sect_line): New variable objfile, initialize it
4735 from S. Iterate S using ALL_OBJFILE_SYMTABS. Verify BV for each S.
4736 * symtab.h (struct symtab) <next>: Comment extension.
4738 2011-02-12 Yao Qi <yao@codesourcery.com>
4740 * Makefile.in (CLEANDIRS): Remove duplicated common dir.
4742 2011-02-11 Yao Qi <yao@codesourcery.com>
4744 * common/Makefile.in: Add copyright header.
4746 2011-02-11 Pedro Alves <pedro@codesourcery.com>
4748 * infrun.c (proceed): Move switching out and in of tfind mode from
4750 (fetch_inferior_event): ... to here.
4752 2011-02-11 Yao Qi <yao@codesourcery.com>
4754 * Makefile.in: Remove signals.o from COMMON_OBS. Link
4756 * configure.ac: Add common to sub dir.
4757 * configure: Regenerate.
4759 2011-02-11 Yao Qi <yao@codesourcery.com>
4763 * common/Makefile.in: New.
4764 * common/configure.ac: New.
4765 * common/aclocal.m4: New.
4766 * common/configure: Generate.
4768 2011-02-10 Pedro Alves <pedro@codesourcery.com>
4770 * vec.h (VEC_block_remove): Place VEC_ASSERT_INFO on the right
4771 side of the parenthesis.
4774 2010-07-13 Jakub Jelinek <jakub@redhat.com>
4775 * vec.h (VEC_block_remove): Fix comment.
4777 2011-02-08 Michael Snyder <msnyder@vmware.com>
4779 * linux-nat.c (linux_nat_filter_event): Fix typo in comment.
4781 2011-02-08 Jan Kratochvil <jan.kratochvil@redhat.com>
4783 * i386-tdep.c (i386_process_record): Rename l suffixes to d suffixes
4784 in comments for pcmpgtd, pcmpeqd, psubd, paddd, pcmpgtd, pcmpeqd,
4787 2011-02-08 Jan Kratochvil <jan.kratochvil@redhat.com>
4790 * i386-tdep.c (i386_process_record) <0x660f3807>: Fix the comment to
4792 (i386_process_record) <lddqu>: Fix the opcode to 0xf20ff0.
4793 (i386_process_record) <0x0f3807>: Fix the comment to phsubsw.
4795 2011-02-08 Ulrich Weigand <uweigand@de.ibm.com>
4797 * dwarf2read.c (read_subroutine_type): Set special calling
4798 convention flag for functions compiled by IBM XL C for OpenCL.
4799 * ppc-sysv-tdep.c: Include "dwarf2.h"
4800 (ppc_sysv_abi_push_dummy_call): Implement IBM OpenCL vector types
4802 (do_ppc_sysv_return_value): Add FUNC_TYPE argument. Implement
4803 IBM OpenCL vector types calling convention.
4804 (ppc_sysv_abi_return_value): Pass through FUNC_TYPE.
4805 (ppc_sysv_abi_broken_return_value): Likewise.
4806 (ppc64_sysv_abi_push_dummy_call): Implement IBM OpenCL vector
4807 types calling convention.
4808 (ppc64_sysv_abi_return_value): Likewise.
4809 * spu-tdep.c: Include "dwarf2.h"
4810 (spu_return_value): Implement IBM OpenCL vector types calling
4813 2011-02-08 Ulrich Weigand <uweigand@de.ibm.com>
4815 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): Implement
4816 correct ABI for AltiVec vector arguments.
4818 2011-02-07 Pedro Alves <pedro@codesourcery.com>
4820 * valprint.c (val_print): Extend comment.
4821 * ada-valprint.c (ada_valprint): Rewrite comment deferring
4822 interface explanation to val_print.
4823 (ada_val_print_array): Adjust comment to current interface.
4824 (print_field_values): Adjust comment to current interface.
4825 * c-valprint.c (c_val_print): Rewrite comment deferring interface
4826 explanation to val_print.
4827 * f-valprint.c (f_val_print): Ditto.
4828 * jv-valprint.c (java_val_print): Ditto.
4829 * m2-valprint.c (m2_val_print): Ditto.
4830 * p-valprint.c (pascal_val_print): Ditto.
4832 2011-02-07 Thiago Jung Bauermann <bauerman@br.ibm.com>
4834 * breakpoint.c (parse_breakpoint_sals): Fix description.
4836 2011-02-04 Sami Wagiaalla <swagiaal@redhat.com>
4837 Oguz Kayral <oguzkayral@gmail.com>
4839 * python/py-inferior.c (python_on_normal_stop): New function.
4840 (python_on_resume): New function.
4841 (python_inferior_exit): New function.
4842 (gdbpy_initialize_inferior): Add normal_stop, target_resumed, and
4843 inferior_exit observers.
4844 * python/py-evtregistry.c: New file.
4845 * python/py-threadevent.c : New file.
4846 * python/py-event.c: New file.
4847 * python/py-evts.c: New file.
4848 * python/py-continueevent.c: New file.
4849 * python/py-bpevent.c: New file.
4850 * python/py-signalevent.c: New file.
4851 * python/py-exetiedevent.c: New file.
4852 * python/py-breakpoint.c (gdbpy_breakpoint_from_bpstats): New function.
4853 Move struct breakpoint_object from here...
4854 * python/python-internal.h: ... to here.
4855 * python/py-event.h: New file.
4856 * python/py-events.h: New file.
4857 * Makefile.in (SUBDIR_PYTHON_OBS): Add py-breakpointstopevent.o,
4858 py-continueevent.o, py-event.o, py-eventregistry.o, py-events.o,
4859 py-exitedevent.o, py-signalstopevent.o, and py-stopevent.o.
4860 (SUBDIR_PYTHON_SRCS): Add py-breakpointstopevent.c,
4861 py-continueevent.c, py-event.c, py-eventregistry.c, py-events.c,
4862 py-exitedevent.c, py-signalstopevent.c, and py-stopevent.c.
4863 Add build rules for all the above.
4865 2011-02-04 Tom Tromey <tromey@redhat.com>
4867 * dwarf2read.c (dwarf2_section_empty_p): New function.
4868 (dwarf2_read_section): Use dwarf2_section_empty_p.
4869 (dwarf2_section_size): New function.
4870 (dwarf2_get_section_info): Unconditionally read section.
4871 (dwarf2_read_index): Use dwarf2_section_empty_p.
4872 (partial_read_comp_unit_head): Use dwarf2_section_size.
4873 (dwarf2_symbol_mark_computed): Likewise.
4875 2011-02-04 David Daney <ddaney@caviumnetworks.com>
4877 * NEWS: Add item for "catch syscall" on mips*-linux* targets.
4879 2011-02-04 David Daney <ddaney@caviumnetworks.com>
4881 * mips-linux-tdep.c: Include xml-syscall.h.
4882 (mips_linux_get_syscall_number): New function.
4883 (mips_linux_init_abi): Add calls to
4884 mips_linux_get_syscall_number() and set_xml_syscall_file_name().
4885 * data-directory/Makefile.in (SYSCALLS_FILES): Add
4886 mips-o32-linux.xml, mips-n32-linux.xml and mips-n64-linux.xml
4887 * syscalls/mips-n32-linux.xml: New file.
4888 * syscalls/mips-n64-linux.xml: New file.
4889 * syscalls/mips-o32-linux.xml: New file.
4891 2011-02-04 Ulrich Weigand <ulrich.weigand@linaro.org>
4893 * dwarf2read.c (dwarf2_ranges_read): Skip empty range entries.
4894 Complain about inverted range entries.
4895 (dwarf2_record_block_ranges): Likewise.
4897 2011-02-04 Thiago Jung Bauermann <bauerman@br.ibm.com>
4900 * breakpoint.c (update_watchpoint): Fix name of the
4901 update_global_location_list function.
4902 (print_one_breakpoint): Fix typo.
4903 (_initialize_breakpoint): Remove extra space in hbreak help
4905 * breakpoint.h (struct bp_location) <length>: Fix field
4908 2011-02-04 Pedro Alves <pedro@codesourcery.com>
4910 * regcache.c (registers_changed_ptid): Don't explictly always
4911 clear `current_regcache'. Only clear current_thread_ptid and
4912 current_thread_arch when PTID matches. Only reinit the frame
4913 cache if PTID matches the current inferior_ptid. Move alloca(0)
4915 (registers_changed): ... here.
4917 2011-02-03 Ulrich Weigand <ulrich.weigand@linaro.org>
4919 * arm-tdep.c (arm_skip_stack_protector): Accept any symbol that
4920 starts with __stack_chk_guard as stack guard symbol.
4922 2011-02-03 Andrew Burgess <aburgess@broadcom.com>
4924 * disasm.c (compare_lines): Handle the end of sequence markers
4925 within the line table to better support disassembling over
4926 compilation unit boundaries.
4928 2011-02-02 Ulrich Weigand <ulrich.weigand@linaro.org>
4930 * arm-tdep.c (skip_prologue_function): Add GDBARCH and IS_THUMB
4931 arguments. Skip in-prologue calls to glibc __aeabi_read_tp
4932 implementation even if no symbols are available.
4933 (thumb_analyze_prologue): Update call to skip_prologue_function.
4934 (arm_analyze_prologue): Likewise.
4936 2011-02-02 Ulrich Weigand <ulrich.weigand@linaro.org>
4938 * arm-tdep.c: Include "observer.h".
4939 (arm_prologue_this_id): Use frame PC if get_frame_func returns 0.
4940 (arm_exidx_data_key): New static variable.
4941 (struct arm_exidx_entry, arm_exidx_entry_s): New data types.
4942 (struct arm_exidx_data): Likewise.
4943 (arm_exidx_data_free): New function.
4944 (arm_compare_exidx_entries): Likewise.
4945 (arm_obj_section_from_vma): Likewise.
4946 (arm_exidx_new_objfile): Likewise.
4947 (arm_find_exidx_entry): Likewise.
4948 (arm_exidx_fill_cache): Likewise.
4949 (arm_exidx_unwind_sniffer): Likewise.
4950 (arm_exidx_unwind): New global variable.
4951 (arm_gdbarch_init): Append unwinder arm_exidx_unwind.
4952 (_initialize_arm_tdep): Attach arm_exidx_new_objfile to new_objfile
4953 observer. Register arm_exidx_data_key as objfile data.
4955 2011-02-02 Ulrich Weigand <ulrich.weigand@linaro.org>
4957 * arm-tdep.c (arm_analyze_load_stack_chk_guard): Avoid build break
4958 due to accessing uninitialized variable. Fix indentation.
4960 2011-02-02 Pedro Alves <pedro@codesourcery.com>
4962 * c-valprint.c (c_value_print): When doing virtual base pointer
4963 adjustment, create a new value with adjusted contents rather than
4964 changing the contents of the value being printed (and getting it
4967 2011-02-02 Pedro Alves <pedro@codesourcery.com>
4969 * xml-support.c (xml_find_attribute): New.
4970 (xinclude_start_include): Use it.
4971 * xml-support.h (xml_find_attribute): Declare.
4972 * memory-map.c (memory_map_start_memory)
4973 (memory_map_start_property): Use xml_find_attribute.
4974 * osdata.c (osdata_start_osdata, osdata_start_column): Use
4976 * remote.c (start_thread): Use xml_find_attribute.
4977 * solib-target.c (library_list_start_segment)
4978 (library_list_start_section, library_list_start_library)
4979 (library_list_start_list): Use xml_find_attribute.
4980 * xml-tdesc.c (tdesc_start_target, tdesc_start_feature)
4981 (tdesc_start_union, tdesc_start_struct, tdesc_start_flags)
4982 (tdesc_start_field): Use xml_find_attribute.
4984 2011-02-02 Ulrich Weigand <uweigand@de.ibm.com>
4986 * opencl-lang.c (STRINGIFY): Rename to OCL_STRING.
4987 (BUILD_OCL_VTYPES): Update.
4989 2011-02-02 Joel Brobecker <brobecker@adacore.com>
4991 * configure.ac: Work around non-GNU sed limitation when computing
4992 python version number.
4993 * configure: Regenerate.
4995 2011-02-01 Jan Kratochvil <jan.kratochvil@redhat.com>
4997 Fix debug printing of TYPE_INSTANCE.
4998 * expprint.c (print_subexp_standard) <TYPE_INSTANCE>: New.
4999 (dump_subexp_body_standard) <TYPE_INSTANCE>: New.
5001 2011-02-01 Jan Kratochvil <jan.kratochvil@redhat.com>
5003 Fix debug printing of BINOP_IN, OP_OBJC_MSGCALL,
5004 OP_F77_UNDETERMINED_ARGLIST, OP_COMPLEX, OP_OBJC_SELECTOR, OP_NAME,
5005 OP_OBJC_NSSTRING, OP_F90_RANGE and OP_DECFLOAT.
5006 * ada-operator.inc: Rename the file to ...
5007 * ada-operator.def: ... here, wrap all the entries by macro OP.
5008 * expprint.c (op_name_standard): Remove all the entries. Include
5009 "std-operator.def" instead.
5010 * expression.h (enum exp_opcode): Include "std-operator.def" and
5011 "ada-operator.def". Move all the entries ...
5012 * std-operator.def: ... here, wrap all the entries by macro OP.
5014 2011-01-31 Paul Pluzhnikov <ppluzhnikov@google.com>
5016 * breakpoint.h (remove_jit_event_breakpoints): New prototype.
5017 * breakpoint.c (remove_jit_event_breakpoints): New function.
5018 * jit.c (jit_descriptor_addr): Delete.
5019 (registering_code): Delete.
5020 (clear_int): Delete.
5021 (jit_inferior_data): New variable.
5022 (struct jit_inferior_data): New type.
5023 (get_jit_inferior_data): New function.
5024 (jit_inferior_data_cleanup): New function.
5025 (jit_read_descriptor): Adjust.
5026 (jit_register_code): Adjust.
5027 (jit_breakpoint_re_set_internal): New function; move code here ...
5028 (jit_inferior_init): ... from here.
5029 (jit_breakpoint_re_set): Adjust.
5030 (jit_reset_inferior_data_and_breakpoints): New function.
5031 (jit_inferior_created_observer): Adjust.
5032 (jit_inferior_exit_hook): Adjust.
5033 (jit_executable_changed_observer): New function.
5034 (jit_event_handler): Adjust.
5035 (_initialize_jit): Adjust.
5037 2011-01-31 Michael Snyder <msnyder@vmware.com>
5039 * m32r-tdep.c (m32r_gdbarch_init): Replace accidentally deleted
5042 2011-01-31 Tom Tromey <tromey@redhat.com>
5045 * python/python.c (execute_gdb_command): Call
5046 prevent_dont_repeat.
5047 * top.c (suppress_dont_repeat): New global.
5048 (dont_repeat): Use it.
5049 (prevent_dont_repeat): New function.
5050 * command.h (prevent_dont_repeat): Declare.
5052 2011-01-31 Tom Tromey <tromey@redhat.com>
5054 * infcmd.c (finish_backward): Use breakpoint_set_silent.
5055 * python/py-breakpoint.c (bppy_set_silent): Use
5056 breakpoint_set_silent.
5057 (bppy_set_thread): Use breakpoint_set_thread.
5058 (bppy_set_task): Use breakpoint_set_task.
5059 * breakpoint.h (breakpoint_set_silent, breakpoint_set_thread)
5060 (breakpoint_set_task): Declare.
5061 (make_breakpoint_silent): Remove.
5062 * breakpoint.c (breakpoint_set_silent): New function.
5063 (breakpoint_set_thread): Likewise.
5064 (breakpoint_set_task): Likewise.
5065 (make_breakpoint_silent): Remove.
5067 2011-01-31 Tom Tromey <tromey@redhat.com>
5069 * breakpoint.h (user_breakpoint_p): Declare.
5070 * breakpoint.c (user_breakpoint_p): New function.
5071 (breakpoint_1): Use it.
5072 (save_breakpoints): Likewise.
5074 2011-01-31 Joel Brobecker <brobecker@adacore.com>
5076 * configure.ac: Add handling of Python distribution on Windows.
5077 * python-config.py: If the LIBS, SYSLIBS, LIBPL and/or LINKFORSHARED
5078 sysconfig variables are not defined, then do not use them.
5079 On Windows, if LIBPL is not defined, then use prefix + '/libs'
5080 instead. On Windows, return all paths using forward-slashes
5081 rather than backslashes.
5083 2011-01-31 Joel Brobecker <brobecker@adacore.com>
5085 * configure.ac: Remove fallback behavior for building
5086 against Python. Remove tweaking of Python include path.
5087 Add PYTHON_CPPFLAGS and PYTHON_LIBS substitution.
5088 (AC_TRY_LIBPYTHON): Adjust program used in linking test.
5089 If link is successful, set PYTHON_CPPFLAGS and PYTHON_LIBS.
5090 Always restore CPPFLAGS and LIBS after linking test.
5091 * configure: Regenerated.
5092 * Makefile.in (INTERNAL_CPPFLAGS): Add @PYTHON_CPPFLAGS@.
5093 (INSTALLED_LIBS, CLIBS): Add @PYTHON_LIBS@.
5094 * python/python-internal.h: Adjust includes of Python .h files.
5096 2011-01-31 Joel Brobecker <brobecker@adacore.com>
5098 * tracepoint.c (traceframe_walk_blocks): Add missing i18n markup
5101 2011-01-31 Joel Brobecker <brobecker@adacore.com>
5103 * inflow.c (gdb_has_a_terminal): Fix typo in interactive_mode
5106 2011-01-31 Yao Qi <yao@codesourcery.com>
5108 * arm-linux-nat.c: Update calls to regcache_register_status
5109 instead of regcache_valid_p.
5110 * aix-thread.c: Likewise.
5111 * i386gnu-nat.c: Likewise.
5113 2011-01-29 Jan Kratochvil <jan.kratochvil@redhat.com>
5116 * valops.c (compare_parameters): Verify TYPE_NFIELDS before
5117 touching TYPE_FIELD_ARTIFICIAL.
5119 2011-01-28 Richard Earnshaw <rearnsha@arm.com>
5121 * MAINTAINERS: Move myself from Responsible Maintainers to Authorized
5124 2011-01-28 Pedro Alves <pedro@codesourcery.com>
5126 * tracepoint.c (tfile_xfer_partial): If there's no traceframe
5127 selected, don't try iterating over the traceframe's blocks.
5128 (tfile_has_stack): If there's no traceframe selected, then there's
5130 (tfile_has_registers): If there's no traceframe selected, then
5131 there's no registers.
5133 2011-01-28 Pedro Alves <pedro@codesourcery.com>
5135 * target.c (memory_xfer_partial): No need to restore shadows if we
5136 haven't read anything.
5138 2011-01-28 Pedro Alves <pedro@codesourcery.com>
5140 * mips-tdep.c (mips_print_register): Use get_frame_register_value
5141 and val_print_scalar_formatted.
5143 2011-01-27 Pedro Alves <pedro@codesourcery.com>
5145 * tracepoint.c (tfile_read): New.
5146 (tfile_open): Use it.
5147 (tfile_get_traceframe_address): Use it.
5148 (tfile_trace_find): Use it.
5149 (walk_blocks_callback_func): New typedef.
5150 (match_blocktype): New function.
5151 (traceframe_walk_blocks): New function.
5152 (traceframe_find_block_type): New function.
5153 (tfile_fetch_registers, tfile_xfer_partial)
5154 (tfile_get_trace_state_variable_value): Use
5155 traceframe_find_block_type and tfile_read.
5157 2011-01-26 Kevin Buettner <kevinb@redhat.com>
5159 * remote-mips.c: Add internationalization mark ups. Remove
5160 trailing \n from already marked up strings.
5162 2011-01-26 Tom Tromey <tromey@redhat.com>
5164 * python/py-prettyprint.c (print_string_repr): Clear
5165 'addressprint' option when calling val_print_string.
5166 (print_children): Handle Val_pretty_default. Clear 'addressprint'
5167 option when calling val_print_string.
5169 2011-01-26 Tom Tromey <tromey@redhat.com>
5171 * python/python.c (gdbpy_solib_name): Use gdb_py_longest and
5173 * python/python-internal.h (GDB_PY_LL_ARG, GDB_PY_LLU_ARG): New
5175 (gdb_py_longest, gdb_py_ulongest): New typedefs.
5176 (gdb_py_long_from_longest, gdb_py_long_from_ulongest)
5177 (gdb_py_long_as_ulongest): New defines.
5178 (gdb_py_object_from_longest, gdb_py_object_from_ulongest)
5179 (gdb_py_int_as_long): Declare.
5180 * python/py-value.c (valpy_lazy_string): Use gdb_py_longest,
5181 GDB_PY_LL_ARG, gdb_py_object_from_longest.
5182 (valpy_long): Add comment.
5183 * python/py-utils.c (get_addr_from_python): Use
5184 gdb_py_long_as_ulongest. Handle overflow properly.
5185 (gdb_py_object_from_longest): New function.
5186 (gdb_py_object_from_ulongest): Likewise.
5187 (gdb_py_int_as_long): Likewise.
5188 * python/py-type.c (typy_array): Use gdb_py_int_as_long.
5189 * python/py-symtab.c (salpy_get_pc): Use
5190 gdb_py_long_from_ulongest.
5191 (salpy_get_line): Use PyInt_FromLong.
5192 * python/py-param.c (set_parameter_value): Use
5194 * python/py-lazy-string.c (stpy_get_address): Use
5195 gdb_py_long_from_ulongest.
5196 * python/py-frame.c (frapy_pc): Use gdb_py_long_from_ulongest.
5197 * python/py-cmd.c (cmdpy_completer): Use gdb_py_int_as_long.
5198 * python/py-breakpoint.c (bppy_set_thread): Use
5200 (bppy_set_task): Likewise.
5201 (bppy_set_ignore_count): Likewise.
5202 (bppy_set_hit_count): Likewise.
5203 * python/py-block.c (blpy_get_start): Use
5204 gdb_py_object_from_ulongest.
5205 (blpy_get_end): Likewise.
5206 (gdbpy_block_for_pc): Use gdb_py_ulongest and GDB_PY_LLU_ARG.
5208 2011-01-25 Mathieu Lacage <mathieu.lacage@inria.fr>
5211 * gdb/objfiles.h (struct objfile) <addr_low>: New field.
5212 * gdb/solib.c (solib_read_symbols): Check for addr_low in
5213 equality test for objfile, initialize addr_low if needed.
5215 2011-01-25 Pedro Alves <pedro@codesourcery.com>
5217 * tui/tui-regs.c (tui_register_format): Remove dead code.
5219 2011-01-25 Pedro Alves <pedro@codesourcery.com>
5221 * printcmd.c (print_formatted): Use val_print_scalar_formatted
5222 instead of print_scalar_formatted.
5223 (print_scalar_formatted): Don't handle 's' format strings here,
5224 and add an assertion that we never see such format here.
5225 * valprint.h (val_print_scalar_formatted): Declare.
5226 * valprint.c (val_print_scalar_formatted): New.
5227 * c-valprint.c (c_val_print): Use val_print_scalar_formatted
5228 instead of print_scalar_formatted.
5229 * jv-valprint.c (java_val_print): Ditto.
5230 * p-valprint.c (pascal_val_print): Ditto.
5231 * ada-valprint.c (ada_val_print_1): Ditto.
5232 * f-valprint.c (f_val_print): Ditto.
5233 * infcmd.c (registers_info): Ditto.
5234 * m2-valprint.c (m2_val_print): Ditto.
5236 2011-01-25 Pedro Alves <pedro@codesourcery.com>
5238 * m2-valprint.c (print_unbounded_array): Pass
5239 value_contents_for_printing rather than value_contents, to
5240 m2_print_array_contents. Also pass in the value.
5242 2011-01-25 Jan Kratochvil <jan.kratochvil@redhat.com>
5244 * dwarf2read.c (dwarf2_read_index, write_psymtabs_to_index)
5245 (save_gdb_index_command): Switch to .gdb_index version 4.
5247 2011-01-25 Pedro Alves <pedro@codesourcery.com>
5249 * mi/mi-main.c (get_register): Use get_frame_register_value rather
5250 than frame_register, and always pass a valid value to val_print.
5252 2011-01-25 Pedro Alves <pedro@codesourcery.com>
5254 Centralize printing "<optimized out>".
5256 * valprint.h (val_print_optimized_out): Declare.
5257 * cp-valprint.c (cp_print_value_fields): Use
5258 val_print_optimized_out.
5259 * jv-valprint.c (java_print_value_fields): Ditto.
5260 * p-valprint.c (pascal_object_print_value_fields): Ditto.
5261 * printcmd.c (print_formatted): Ditto.
5262 * valprint.c (valprint_check_validity): Ditto.
5263 (value_check_printable): Ditto.
5264 (val_print_optimized_out): New.
5266 2011-01-25 Pedro Alves <pedro@codesourcery.com>
5268 * infcmd.c (default_print_registers_info): Allocate values so to
5269 never pass a NULL value to val_print.
5271 2011-01-25 Pedro Alves <pedro@codesourcery.com>
5273 * cp-valprint.c (cp_print_value): Treat the 'skip' local as
5274 boolean. Make sure to always pass a value that matches the
5275 contents buffer to callees. Preserve `address' for following
5277 * value.c (value_contents_for_printing_const): New.
5278 (value_address): Constify value argument.
5279 * value.h (value_contents_for_printing_const): Declare.
5280 (value_address): Constify value argument.
5282 2011-01-25 Pedro Alves <pedro@codesourcery.com>
5284 * regcache.c (struct regcache_descr): Rename
5285 sizeof_raw_register_valid_p field to sizeof_raw_register_status,
5286 and sizeof_cooked_register_valid_p to
5287 sizeof_cooked_register_status.
5288 (init_regcache_descr): Adjust.
5289 (struct regcache): Rename register_valid_p field to
5291 (regcache_xmalloc_1, regcache_xfree, regcache_save)
5292 (do_cooked_read): Adjust.
5293 (regcache_valid_p): Rename to ...
5294 (regcache_register_status): ... this. Adjust.
5295 (regcache_invalidate): Adjust.
5296 (regcache_raw_read, regcache_cooked_read, regcache_raw_write):
5298 (regcache_raw_supply): Adjust. If buf i NULL, mark the register
5299 as unavailable, not valid.
5300 (regcache_dump): Adjust.
5301 * regcache.h (enum register_status): New.
5302 (regcache_register_status): Declare.
5303 (regcache_invalidate): Delete declaration.
5304 * corelow.c (get_core_registers): Adjust.
5305 * tracepoint.c (tfile_fetch_registers): Adjust.
5306 * trad-frame.c (REG_VALUE): Rename to ...
5307 (TF_REG_VALUE): ... this.
5308 (REG_UNKNOWN): Rename to ...
5309 (TF_REG_UNKNOWN): ... this.
5310 (trad_frame_set_value, trad_frame_set_unknown): Adjust.
5311 * mi/mi-main.c (register_changed_p): Adjust.
5313 2011-01-25 Pedro Alves <pedro@codesourcery.com>
5315 * regcache.c (struct regcache_descr): Remove outdated comment.
5316 (init_regcache_descr): Remove sizeof_raw_register_valid_p
5318 (regcache_xmalloc): Rename to ...
5319 (regcache_xmalloc_1): ... this. Add `readonly_p' parameter.
5320 Allocate the regcache type accordingly.
5321 (regcache_xmalloc): New as wrapper around regcache_xmalloc_1.
5322 (regcache_xfree): Asser the source is also readonly. Copy sizeof
5323 cooked registers, not raw.
5324 (regcache_dup_no_passthrough): Delete.
5325 (get_thread_arch_regcache): Use regcache_xmalloc_1.
5326 * h8300-tdep.c (h8300_push_dummy_call): Tweak comment to not
5327 mention obsolete write_register_bytes.
5328 * regcache.h (regcache_dup_no_passthrough): Delete declaration.
5330 2011-01-25 Pedro Alves <pedro@codesourcery.com>
5332 Stop remote_read_bytes from handling partial reads itself.
5334 * remote-fileio.c: Include target.h.
5335 (remote_fileio_write_bytes): Delete.
5336 (remote_fileio_func_open, remote_fileio_func_write)
5337 (remote_fileio_func_rename, remote_fileio_func_unlink): Use
5339 (remote_fileio_func_stat): Use target_read_memory and
5340 target_write_memory.
5341 (remote_fileio_func_gettimeofday): Use target_write_memory.
5342 (remote_fileio_func_system): Use target_read_memory.
5343 * remote.c (remote_write_bytes): Make it static.
5344 (remote_read_bytes): Don't handle partial reads here.
5345 * remote.h (remote_read_bytes): Delete declaration.
5347 2011-01-25 Pedro Alves <pedro@codesourcery.com>
5349 Simplify XML parsing a bit.
5351 * xml-support.h (gdb_xml_parse_quick): Declare.
5352 * xml-support.c (gdb_xml_create_parser_and_cleanup_1): Renamed
5353 from gdb_xml_create_parser_and_cleanup, and added `old_chain'
5355 (gdb_xml_create_parser_and_cleanup): Reimplement on top of
5356 gdb_xml_create_parser_and_cleanup_1.
5357 (gdb_xml_parse_quick): New.
5358 * memory-map.c (parse_memory_map): Use gdb_xml_parse_quick.
5359 * osdata.c (osdata_parse): Ditto.
5360 * remote.c (remote_threads_info): Ditto.
5361 * solib-target.c (solib_target_parse_libraries): Ditto.
5362 * xml-syscall.c (syscall_parse_xml): Ditto.
5363 * xml-tdesc.c (tdesc_parse_xml): Ditto.
5365 2011-01-24 Kevin Buettner <kevinb@redhat.com>
5367 * configure.tgt (mips*-*-elf): New; just like mips*-*-*, but
5368 with remote-mips.o added to gdb_target_obs.
5369 * Makefile.in (ALL_TARGET_OBS): Add remote-mips.o.
5371 2011-01-24 Pedro Alves <pedro@codesourcery.com>
5373 * ada-valprint.c (val_print_packed_array_elements): Pass the
5374 correct struct value to val_print.
5375 (ada_val_print_1): Ditto.
5377 2011-01-24 Pedro Alves <pedro@codesourcery.com>
5379 Don't lose embedded_offset in printing routines throughout.
5381 * valprint.h (val_print_array_elements): Change prototype.
5382 * valprint.c (val_print_array_elements): Add `embedded_offset'
5383 parameter, and adjust to pass it down to val_print, while passing
5384 `valaddr' or `address' unmodified. Take embedded_offset into
5385 account when checking repetitions.
5386 * c-valprint.c (c_val_print): Pass embedded_offset to
5387 val_print_array_elements instead of adjusting `valaddr' and
5389 * m2-valprint.c (m2_print_array_contents, m2_val_print): Pass
5390 embedded_offset to val_print_array_elements instead of adjusting
5392 * p-lang.h (pascal_object_print_value_fields): Adjust prototype.
5393 * p-valprint.c (pascal_val_print): Pass embedded_offset to
5394 val_print_array_elements and pascal_object_print_value_fields
5395 instead of adjusting `valaddr'.
5396 (pascal_object_print_value_fields): Add `offset' parameter, and
5398 (pascal_object_print_value): Add `offset' parameter, and adjust to
5400 (pascal_object_print_static_field): Use
5401 value_contents_for_printing/value_embedded_offset, rather than
5403 * ada-valprint.c (val_print_packed_array_elements): Add `offset'
5404 parameter, and adjust to use it. Use
5405 value_contents_for_printing/value_embedded_offset, rather than
5407 (ada_val_print): Rename `valaddr0' parameter to `valaddr'.
5408 (ada_val_print_array): Add `offset' parameter, and adjust to use
5410 (ada_val_print_1): Rename `valaddr0' parameter to `valaddr', and
5411 `embedded_offset' to `offset'. Don't re-adjust `valaddr'.
5412 Instead work with offsets. Use
5413 value_contents_for_printing/value_embedded_offset, rather than
5414 value_contents. Change `defer_val_int' local type to CORE_ADDR,
5415 and use value_from_pointer to extract a target pointer, rather
5416 than value_from_longest.
5417 (print_variant_part): Add `offset' parameter. Replace
5418 `outer_valaddr' parameter by a new `outer_offset' parameter.
5419 Don't re-adjust `valaddr'. Instead pass down adjusted offsets.
5420 (ada_value_print): Use
5421 value_contents_for_printing/value_embedded_offset, rather than
5423 (print_record): Add `offset' parameter, and adjust to pass it
5425 (print_field_values): Add `offset' parameter. Replace
5426 `outer_valaddr' parameter by a new `outer_offset' parameter.
5427 Don't re-adjust `valaddr'. Instead pass down adjusted offsets.
5428 Use value_contents_for_printing/value_embedded_offset, rather than
5430 * d-valprint.c (dynamic_array_type): Use
5431 value_contents_for_printing/value_embedded_offset, rather than
5433 * jv-valprint.c (java_print_value_fields): Add `offset' parameter.
5434 Don't re-adjust `valaddr'. Instead pass down adjusted offsets.
5435 (java_print_value_fields): Take `offset' into account. Don't
5436 re-adjust `valaddr'. Instead pass down adjusted offsets.
5437 (java_val_print): Take `embedded_offset' into account. Pass it to
5438 java_print_value_fields.
5439 * f-valprint.c (f77_print_array_1): Add `embedded_offset'
5440 parameter. Don't re-adjust `valaddr' or `address'. Instead pass
5441 down adjusted offsets.
5442 (f77_print_array): Add `embedded_offset' parameter. Pass it down.
5443 (f_val_print): Take `embedded_offset' into account.
5445 2011-01-21 Joel Brobecker <brobecker@adacore.com>
5447 * inflow.c: Include "gdbcmd.h".
5448 (interactive_mode): New static global, moved here from top.c.
5449 (show_interactive_mode): New function, moved here from top.c.
5450 use gdb_has_a_terminal instead of input_from_terminal_p to
5451 determine the current mode.
5452 (gdb_has_a_terminal): Add handling of the "iteractive-mode"
5454 (_initialize_inflow): Add the "set/show interactive-mode"
5455 commands. Moved here from top.c, after having adjusted slightly
5457 * top.c (interactive_mode, show_interactive_mode): Delete, moved
5459 (input_from_terminal_p): Remove handling of "interactive-mode"
5460 setting, moved to infow.c.
5461 (init_main): Remove creation of the "set/show interactive-mode"
5462 commands, moved to inflow.c.
5464 2011-01-19 Joel Brobecker <brobecker@adacore.com>
5466 * NEWS: Add entry for native ia64-hpux support.
5468 2011-01-19 Tom Tromey <tromey@redhat.com>
5471 * thread.c (free_thread): Free 'name'.
5472 (print_thread_info): Emit thread name. Change CLI output.
5473 (thread_name_command): New function.
5474 (do_captured_thread_select): Emit newline.
5475 (_initialize_thread): Register 'thread name' command.
5476 * target.h (struct target_ops) <to_thread_name>: New field.
5477 (target_thread_name): New macro.
5478 * target.c (update_current_target): Handle to_thread_name.
5479 * python/py-infthread.c (thpy_get_name): New function.
5480 (thpy_set_name): Likewise.
5481 (thread_object_getset): Add "name".
5482 * linux-nat.c (linux_nat_thread_name): New function.
5483 (linux_nat_add_target): Set to_thread_name.
5484 * gdbthread.h (struct thread_info) <name>: New field.
5486 2011-01-18 Joel Brobecker <brobecker@adacore.com>
5488 * ada-valprint.c (ada_print_scalar): Remove unsigned char downcast.
5489 (ada_val_print_1): Likewise.
5491 2011-01-18 Joel Brobecker <brobecker@adacore.com>
5493 * rs6000-tdep.c (rs6000_skip_prologue): Make sure that the prologue
5494 upper limit address is not greater than the function end address
5495 when the upper limit could not be computed using the debugging
5498 2011-01-17 Tom Tromey <tromey@redhat.com>
5500 * cli/cli-cmds.c (apropos_command): Free the compiled regex. Use
5502 * utils.c: Include gdb_regex.h.
5503 (do_regfree_cleanup): New function.
5504 (make_regfree_cleanup): Likewise.
5505 (get_regcomp_error): Likewise.
5506 * gdb_regex.h (make_regfree_cleanup, get_regcomp_error): Declare.
5508 2011-01-17 Tom Tromey <tromey@redhat.com>
5510 * cli/cli-cmds.c (apropos_command): Fix formatting. Don't call
5513 2011-01-17 Pierre Muller <muller@ics.u-strasbg.fr>
5515 * p-exp.y (intvar): New static variable, used to set CURRENT_TYPE
5516 for internal variables.
5517 (last_was_structop): New static variable.
5518 (COMPLETE): New token.
5519 (field_exp): New rule to group all '.' suffix handling.
5520 Add mark_struct_expression calls when approriate to be able
5521 to correctly find fields for completion.
5522 (yylex): Adapt to handle field completion and set INTVAR when
5525 2011-01-14 Yao Qi <yao@codesourcery.com>
5527 * arm-tdep.c (arm_register_reggroup_p): FPS register is in
5528 save_reggroup, restore_reggroup and all_reggroup.
5530 2011-01-14 Joel Brobecker <brobecker@adacore.com>
5532 * ada-valprint. (ada_printchar): Use the correct type length
5533 in call to ada_emit_char.
5534 * c-valprint.c (c_val_print): Remove cast in call to LA_PRINT_CHAR.
5536 2011-01-14 Pierre Muller <muller@ics.u-strasbg.fr>
5538 * solib-som.h (hpux_major_release): Declare variable here.
5539 * solib-som.c: Remove <sys/utsname.h> header.
5540 (DEFAULT_HPUX_MAJOR_RELEASE): New macro.
5541 (hpux_major_release): Make global, change default value to
5542 DEFAULT_HPUX_MAJOR_RELEASE.
5543 (get_hpux_major_release): Simply return HPUX_MAJOR_RELEASE.
5544 * hppa-hpux-nat.c: Add <sys/utsname.h> include.
5545 Add "solib-som.h" header.
5546 (set_hpux_major_release): New function.
5547 (_initialize_hppa_hpux_nat): Call set_hpux_major_release.
5549 2011-01-14 Mike Frysinger <vapier@gentoo.org>
5551 * configure.tgt (*-*-uclinux*): Match more Linux os targets
5553 2011-01-14 Joel Brobecker <brobecker@adacore.com>
5555 * ia64-hpux-nat.c (ia64_hpux_fetch_register): Remove trailing
5556 new-line at end of warning message.
5557 (ia64_hpux_store_register): Remove trailing new-line at end of
5559 * ia64-hpux-tdep.c: Rephrase comment.
5560 * solib-ia64-hpux.c (struct dld_info): Change type of field
5561 dld_flags from "long long" to ULONGEST.
5563 2011-01-14 Pedro Alves <pedro@codesourcery.com>
5565 * target.h (deprecated_child_ops): Delete declaration.
5566 * target.c (deprecated_child_ops): Delete definition.
5568 2011-01-14 Pedro Alves <pedro@codesourcery.com>
5570 * Makefile.in (hpux-thread.o): Delete rule.
5571 * configure.ac: Don't check for HPUX DCE threads support.
5572 * configure, config.in: Regenerate.
5573 * hppa-hpux-nat.c (child_suppress_run): Delete.
5574 (hppa_hpux_child_can_run): Delete.
5575 (_initialize_hppa_hpux_nat): Don't override to_can_run.
5576 * hpux-thread.c: Delete.
5578 2011-01-13 Joel Brobecker <brobecker@adacore.com>
5580 * hpux-thread.c (hpux_pid_to_str): Delete.
5582 2011-01-13 Joel Brobecker <brobecker@adacore.com>
5584 * ada-valprint.c (ada_emit_char): Remove strange code.
5585 Check that c is <= UCHAR_MAX before passing it to isascii.
5586 (char_at): Do not assume that TYPE_LEN is either 1 or 2.
5588 2011-01-13 Joel Brobecker <brobecker@adacore.com>
5590 * top.c (input_from_terminal_p): Restrict the use of interactive_mode
5591 to the case where instream is stdin.
5593 2011-01-13 Joel Brobecker <brobecker@adacore.com>
5595 * ia64-tdep.h (struct regcache): Forward declare.
5596 (struct ia64_infcall_ops): New struct type.
5597 (struct gdbarch_tdep): New fields "find_global_pointer_from_solib"
5599 * ia64-tdep.c (ia64_find_global_pointer_from_dynamic_section):
5600 Renames ia64_find_global_pointer.
5601 (ia64_find_global_pointer, ia64_allocate_new_rse_frame)
5602 (ia64_store_argument_in_slot, ia64_set_function_addr: New function.
5603 (ia64_push_dummy_call): Adjust to use the new tdep ia64_infocall_ops
5605 (ia64_infcall_ops): New static global constant.
5606 (ia64_gdbarch_init): Set tdep->infcall_ops.
5607 * ia64-hpux-nat.c (ia64_hpux_xfer_solib_got): New function.
5608 (ia64_hpux_xfer_partial): Add TARGET_OBJECT_HPUX_SOLIB_GOT handing.
5609 * ia64-hpux-tdep.c: Include "regcache.h", "gdbcore.h" and "inferior.h".
5610 (ia64_hpux_dummy_code): New static global constant.
5611 (ia64_hpux_push_dummy_code, ia64_hpux_allocate_new_rse_frame)
5612 (ia64_hpux_store_argument_in_slot, ia64_hpux_set_function_addr)
5613 (ia64_hpux_dummy_id, ia64_hpux_find_global_pointer_from_solib):
5615 (ia64_hpux_infcall_ops): New static global constant.
5616 (ia64_hpux_init_abi): Install gdbarch and tdep methods needed
5617 for inferior function calls to work properly on ia64-hpux.
5619 2011-01-13 Joel Brobecker <brobecker@adacore.com>
5621 * target.h (enum target_object): Add TARGET_OBJECT_HPUX_UREGS.
5622 * ia64-tdep.h (struct frame_info): forward declaration.
5623 (struct gdbarch_tdep): Add field size_of_register_frame.
5624 * ia64-tdep.c (ia64_access_reg): Use tdep->size_of_register_frame
5625 to determine the size of the register frame.
5626 (ia64_size_of_register_frame): New function.
5627 (ia64_gdbarch_init): Set tdep->size_of_register_frame.
5628 * ia64-hpux-tdep.c: Include "target.h" and "frame.h".
5629 (IA64_HPUX_UREG_REASON): New macro.
5630 (ia64_hpux_stopped_in_syscall, ia64_hpux_size_of_register_frame):
5632 (ia64_hpux_init_abi): Set tdep->size_of_register_frame.
5633 * ia64-hpux-nat.c (ia64_hpux_xfer_uregs): New function.
5634 (ia64_hpux_xfer_partial): Add handling of TARGET_OBJECT_HPUX_UREGS
5637 2011-01-13 Joel Brobecker <brobecker@adacore.com>
5639 Add support for ia64-hpux.
5640 * config/ia64/hpux.mh, ia64-hpux-nat.c, ia64-hpux-tdep.c,
5641 ia64-hpux-tdep.h, solib-ia64-hpux.c, solib-ia64-hpux.h: New files.
5643 * configure.host: Add handling for ia64-hpux hosts. Add associated
5645 * configure.tgt: Add handling for ia64-hpux targets.
5646 * Makefile.in (ALL_64_TARGET_OBS): Add ia64-hpux-tdep.o.
5647 (HFILES_NO_SRCDIR): Add ia64-hpux-tdep.h.
5648 (ALLDEPFILES): Add ia64-hpux-nat.c ia64-hpux-tdep.c.
5650 2011-01-13 Joel Brobecker <brobecker@adacore.com>
5652 [ttrace] Compute thread list immediately after attach.
5653 * inf_ttrace_attach (inf_ttrace_create_threads_after_attach):
5655 (inf_ttrace_attach): Use it.
5657 2011-01-13 Joel Brobecker <brobecker@adacore.com>
5659 * libunwind-frame.c (libunwind_frame_cache): Do not return NULL
5660 if we could not determine the frame's function address. Instead,
5661 use the frame's PC, and then continue.
5663 2011-01-13 Joel Brobecker <brobecker@adacore.com>
5665 * libunwind-frame.c (__LITTLE_ENDIAN, __BIG_ENDIAN): Define if
5666 not already defined.
5668 2011-01-13 Joel Brobecker <brobecker@adacore.com>
5670 * ia64-tdep.c (ia64_struct_type_p): New function.
5671 (ia64_extract_return_value): Handle integral values that are
5672 less than 8 bytes long.
5673 (ia64_push_dummy_call): Likewise.
5675 2011-01-13 Joel Brobecker <brobecker@adacore.com>
5677 * ia64-tdep.c (floatformat_ia64_ext_little): Renames
5678 floatformat_ia64_ext.
5679 (floatformat_ia64_ext_big): New static const.
5680 (floatformats_ia64_ext): Set first entry to &floatformat_ia64_ext_big.
5682 2011-01-12 Tom Tromey <tromey@redhat.com>
5684 * mi/mi-symbol-cmds.c (mi_cmd_symbol_list_lines): Fix error
5686 * mi/mi-main.c (mi_cmd_thread_select): Fix error messages.
5687 (mi_cmd_thread_list_ids): Likewise.
5688 (mi_cmd_data_list_changed_registers): Likewise.
5689 (mi_cmd_data_list_register_values): Likewise.
5690 (mi_cmd_data_write_register_values): Likewise.
5691 (mi_cmd_data_evaluate_expression): Likewise.
5692 (mi_cmd_data_read_memory): Likewise.
5693 (mi_cmd_data_read_memory_bytes): Likewise.
5694 (mi_cmd_data_write_memory): Likewise.
5695 (mi_cmd_enable_timings): Likewise.
5696 * mi/mi-interp.c (mi_cmd_interpreter_exec): Fix error messages.
5697 * mi/mi-cmd-var.c (mi_cmd_var_create): Fix error messages.
5698 (mi_cmd_var_delete): Likewise.
5699 (mi_cmd_var_set_format): Likewise.
5700 (mi_cmd_var_show_format): Likewise.
5701 (mi_cmd_var_info_num_children): Likewise.
5702 (mi_cmd_var_list_children): Likewise.
5703 (mi_cmd_var_info_type): Likewise.
5704 (mi_cmd_var_info_expression): Likewise.
5705 (mi_cmd_var_show_attributes): Likewise.
5706 (mi_cmd_var_assign): Likewise.
5707 (mi_cmd_var_update): Likewise.
5708 (mi_cmd_enable_pretty_printing): Likewise.
5709 (mi_cmd_var_set_update_range): Likewise.
5710 * mi/mi-cmd-target.c (mi_cmd_target_file_get): Fix error
5712 (mi_cmd_target_file_put): Likewise.
5713 (mi_cmd_target_file_delete): Likewise.
5714 * mi/mi-cmd-stack.c (mi_cmd_stack_list_frames): Fix error
5716 (mi_cmd_stack_info_depth): Likewise.
5717 (mi_cmd_stack_list_locals): Likewise.
5718 (mi_cmd_stack_list_args): Likewise.
5719 (mi_cmd_stack_select_frame): Likewise.
5720 (mi_cmd_stack_select_frame): Likewise.
5721 (mi_cmd_stack_info_frame): Likewise.
5722 * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file): Fix error
5724 (mi_cmd_file_list_exec_source_files): Likewise.
5725 * mi/mi-cmd-env.c (mi_cmd_env_pwd): Fix error messages.
5726 (mi_cmd_env_cd): Likewise.
5727 (mi_cmd_env_path): Likewise.
5728 (mi_cmd_env_dir): Likewise.
5729 (mi_cmd_inferior_tty_show): Likewise.
5730 * mi/mi-cmd-disas.c (mi_cmd_disassemble): Fix error messages.
5731 * mi/mi-cmd-break.c (mi_cmd_break_insert): Fix error messages.
5732 (mi_cmd_break_watch): Likewise.
5734 2011-01-12 Thiago Jung Bauermann <bauerman@br.ibm.com>
5736 * ppc-linux-nat.c (booke_cmp_hw_point): Fix whitespace.
5737 (ppc_linux_insert_hw_breakpoint): Likewise.
5738 (ppc_linux_remove_hw_breakpoint): Likewise.
5739 (ppc_linux_insert_watchpoint): Likewise.
5741 2011-01-12 Andrew Burgess <aburgess@broadcom.com>
5742 Jan Kratochvil <jan.kratochvil@redhat.com>
5744 PR fortran/11104 and DWARF unbound arrays detection.
5745 * dwarf2read.c (read_subrange_type): Set zero length on unspecified
5746 upper bound. Set TYPE_HIGH_BOUND_UNDEFINED if not language_ada on
5747 unspecified upper bound.
5748 * eval.c (evaluate_subexp_standard) <multi_f77_subscript>: Remove
5749 variables array_size_array, tmp_type and offset_item. New variable
5750 array. Remove call to f77_get_upperbound. New variables array_type
5751 and index. Call value_subscripted_rvalue for each dimenasion. Remove
5752 the final call to deprecated_set_value_type.
5754 2011-01-12 Jan Kratochvil <jan.kratochvil@redhat.com>
5756 Make value allocations more lazy.
5757 * ada-lang.c (coerce_unspec_val_to_type): Use allocate_value_lazy
5758 instead of allocate_value and set_value_lazy when possible.
5759 * dwarf2loc.c (dwarf2_evaluate_loc_desc_full): Use allocate_value_lazy
5760 instead of allocate_value and set_value_lazy.
5761 * findvar.c (value_of_register_lazy): Likewise.
5762 (read_var_value): Remove V preallocation, call just check_typedef in
5763 advance. Move allocate_value to LOC_CONST, LOC_LABEL,
5764 LOC_CONST_BYTES. Use allocate_value_lazy in LOC_STATIC, LOC_ARG,
5765 LOC_REF_ARG, LOC_LOCAL, LOC_BLOCK. Set ADDR instead of
5766 set_value_address and break in LOC_BLOCK. Use allocate_value_lazy and
5767 remove lval_memory set in LOC_REGPARM_ADDR. Use allocate_value_lazy
5768 in LOC_UNRESOLVED and LOC_OPTIMIZED_OUT. Add setting lval_memory at
5769 the end, remove set_value_lazy there.
5770 * valarith.c (value_subscripted_rvalue): Use allocate_value_lazy
5771 instead of allocate_value and set_value_lazy when possible.
5772 * valops.c (value_fetch_lazy): Do nop for value_optimized_out VAL.
5773 * value.c (allocate_computed_value): Use allocate_value_lazy instead
5774 of allocate_value and set_value_lazy.
5775 (value_from_contents_and_address): Use allocate_value_lazy instead of
5776 allocate_value and set_value_lazy when possible.
5778 2011-01-12 Andrew Burgess <aburgess@broadcom.com>
5780 * disasm.c (dump_insns): Support dumping opcodes for MI.
5781 * mi/mi-cmd-disas.c (mi_cmd_disassemble): Allow mode to control
5782 dumping of instruction opcodes.
5784 2011-01-09 Robert Millan <rmh@gnu.org> (tiny patch)
5786 * configure.tgt: Detect GNU/kFreeBSD and set `gdb_osabi'
5789 2011-01-11 Tom Tromey <tromey@redhat.com>
5791 * thread.c (do_captured_thread_select): Emit newline before
5794 2011-01-11 Michael Snyder <msnyder@vmware.com>
5796 * s390-tdep.c: Comment cleanup, mostly periods and spaces.
5797 * score-tdep.c: Ditto.
5798 * score-tdep.h: Ditto.
5799 * ser-base.c: Ditto.
5800 * ser-go32.c: Ditto.
5803 * ser-mingw.c: Ditto.
5804 * ser-pipe.c: Ditto.
5806 * ser-unix.c: Ditto.
5807 * sh64-tdep.c: Ditto.
5808 * shnbsd-nat.c: Ditto.
5812 * solib-darwin.c: Ditto.
5813 * solib-frv.c: Ditto.
5815 * solib-irix.c: Ditto.
5816 * solib-osf.c: Ditto.
5817 * solib-pa64.c: Ditto.
5818 * solib-som.c: Ditto.
5819 * solib-spu.c: Ditto.
5820 * solib-sunos.c: Ditto.
5821 * solib-svr4.c: Ditto.
5823 * sol-thread.c: Ditto.
5827 * sparc64-linux-tdep.c: Ditto.
5828 * sparc64-tdep.c: Ditto.
5829 * sparc-linux-nat.c: Ditto.
5830 * sparc-linux-tdep.c: Ditto.
5831 * sparc-sol2-nat.c: Ditto.
5832 * sparc-sol2-tdep.c: Ditto.
5833 * sparc-tdep.c: Ditto.
5834 * sparc-tdep.h: Ditto.
5835 * spu-tdep.c: Ditto.
5836 * stabsread.c: Ditto.
5837 * stabsread.h: Ditto.
5845 * target-descriptions.c: Ditto.
5846 * target-descriptions.h: Ditto.
5848 * target-memory.c: Ditto.
5849 * terminal.h: Ditto.
5852 * tracepoint.c: Ditto.
5853 * tracepoint.h: Ditto.
5854 * trad-frame.h: Ditto.
5855 * typeprint.c: Ditto.
5857 2011-01-11 Michael Snyder <msnyder@vmware.com>
5859 * ui-file.c: Comment cleanup, mostly periods and spaces.
5864 * v850-tdep.c: Ditto.
5865 * valarith.c: Ditto.
5867 * valprint.c: Ditto.
5868 * valprint.h: Ditto.
5873 * vax-tdep.c: Ditto.
5877 * windows-nat.c: Ditto.
5878 * windows-tdep.c: Ditto.
5879 * xcoffread.c: Ditto.
5880 * xcoffsolib.c: Ditto.
5881 * xml-support.c: Ditto.
5882 * xstormy16-tdep.c: Ditto.
5883 * xtensa-tdep.c: Ditto.
5884 * xtensa-tdep.h: Ditto.
5886 2011-01-11 Thiago Jung Bauermann <bauerman@br.ibm.com>
5888 * breakpoint.c (resources_needed_watchpoint): Fix indentation.
5889 * gdbtypes.c (is_scalar_type_recursive): Fix formatting.
5891 2011-01-11 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
5892 Thiago Jung Bauermann <bauerman@br.ibm.com>
5894 Implement support for PowerPC BookE ranged watchpoints.
5896 (struct breakpoint_ops) <resources_needed>: New method.
5897 Initialize to NULL in all existing breakpoint_ops instances.
5898 (struct breakpoint) <exact>: New field.
5899 (target_exact_watchpoints): Declare external global.
5900 * breakpoint.c (target_exact_watchpoints): New global flag.
5901 (update_watchpoint): Set b->type to bp_hardware_watchpoint and
5902 b->enable_state to bp_enabled before calling
5903 hw_watchpoint_used_count.
5904 (hw_watchpoint_used_count): Iterate over all bp_locations in a
5905 watchpoint. Call breakpoint's breakpoint_ops.resources_needed
5907 (insert_watchpoint, remove_watchpoint): Use fixed length of 1 byte
5908 if the watchpoint is exact.
5909 (resources_needed_watchpoint): New function.
5910 (watchpoint_breakpoint_ops): Add resources_needed_watchpoint.
5911 (watch_command_1): Set b->exact if the user asked for an exact
5912 watchpoint and one can be set.
5913 (can_use_hardware_watchpoint): Add exact_watchpoints argument.
5914 Pass fixed length of 1 to target_region_ok_for_hw_watchpoint if
5915 the user asks for an exact watchpoint and one can be set. Return
5916 number of needed debug registers to watch the expression.
5917 * gdbtypes.c (is_scalar_type): New function, based on
5918 valprint.c:scalar_type_p.
5919 (is_scalar_type_recursive): New function.
5920 * gdbtypes.h (is_scalar_type_recursive): Declare.
5921 * ppc-linux-nat.c (ppc_linux_region_ok_for_hw_watchpoint): Always
5922 handle regions when ranged watchpoints are available.
5923 (create_watchpoint_request): New function.
5924 (ppc_linux_insert_watchpoint, ppc_linux_remove_watchpoint): Use
5925 create_watchpoint_request.
5926 * rs6000-tdep.c (show_powerpc_exact_watchpoints): New function.
5927 (_initialize_rs6000_tdep): Add `exact-watchpoints' boolean to the
5928 `set powerpc' and `show powerpc' commands.
5929 * target.h (struct target_ops) <to_region_ok_for_hw_watchpoint>:
5930 Mention documentation comment in the target macro.
5931 (target_region_ok_for_hw_watchpoint): Document return value.
5933 2011-01-11 Thiago Jung Bauermann <bauerman@br.ibm.com>
5935 * breakpoint.c (update_watchpoint): Decide on using a software or
5936 hardware watchpoint after the bp_locations are created.
5938 2010-01-11 Thiago Jung Bauermann <bauerman@br.ibm.com>
5940 Convert hardware watchpoints to use breakpoint_ops.
5941 * breakpoint.h (breakpoint_ops) <insert>: Rename to...
5942 <insert_location>: ... this. Return int instead of void.
5943 Accept pointer to struct bp_location instead of pointer to
5944 struct breakpoint. Adapt all implementations.
5945 (breakpoint_ops) <remove>: Rename to...
5946 <remove_location>: ... this. Accept pointer to struct bp_location
5947 instead of pointer to struct breakpoint. Adapt all implementations.
5948 * breakpoint.c (insert_catchpoint): Delete function.
5949 (insert_bp_location): Call the watchpoint or catchpoint's
5950 breakpoint_ops.insert method.
5951 (remove_breakpoint_1): Call the watchpoint or catchpoint's
5952 breakpoint_ops.remove method.
5953 (insert_watchpoint, remove_watchpoint): New functions.
5954 (watchpoint_breakpoint_ops): New structure.
5955 (watch_command_1): Initialize the OPS field.
5956 * inf-child.c (inf_child_insert_fork_catchpoint)
5957 (inf_child_remove_fork_catchpoint, inf_child_insert_vfork_catchpoint)
5958 (inf_child_remove_vfork_catchpoint, inf_child_insert_exec_catchpoint)
5959 (inf_child_remove_exec_catchpoint, inf_child_set_syscall_catchpoint):
5961 (inf_child_target): Remove initialization of to_insert_fork_catchpoint,
5962 to_remove_fork_catchpoint, to_insert_vfork_catchpoint,
5963 to_remove_vfork_catchpoint, to_insert_exec_catchpoint,
5964 to_remove_exec_catchpoint and to_set_syscall_catchpoint.
5965 * target.c (update_current_target): Change default implementation of
5966 to_insert_fork_catchpoint, to_remove_fork_catchpoint,
5967 to_insert_vfork_catchpoint, to_remove_vfork_catchpoint,
5968 to_insert_exec_catchpoint, to_remove_exec_catchpoint and
5969 to_set_syscall_catchpoint to return_one.
5970 (debug_to_insert_fork_catchpoint, debug_to_insert_vfork_catchpoint)
5971 (debug_to_insert_exec_catchpoint): Report return value.
5972 * target.h (to_insert_fork_catchpoint, to_insert_vfork_catchpoint)
5973 (to_insert_exec_catchpoint): Change declaration to return int instead
5976 2011-01-11 Michael Snyder <msnyder@vmware.com>
5978 * arm-tdep.c: Internationalization.
5981 * fork-child.c: Ditto.
5982 * nto-procfs.c: Ditto.
5983 * ppc-sysv-tdep.c: Ditto.
5985 * remote-mips.c: Ditto.
5987 * rs6000-nat.c: Ditto.
5988 * rs6000-tdep.c: Ditto.
5992 * xml-support.c: Ditto.
5993 * mi/mi-cmd-break.c: Ditto.
5994 * mi/mi-cmd-var.c: Ditto.
5995 * mi/mi-interp.c: Ditto.
5996 * mi/mi-main.c: Ditto.
5998 2011-01-11 Andrew Burgess <aburgess@broadcom.com>
6000 * remote-sim.c (gdbsim_store_register): Update API to
6001 sim_store_register to check more error conditions.
6003 2011-01-10 Michael Snyder <msnyder@vmware.com>
6005 * nto-procfs.c: Comment cleanup, mostly periods and spaces.
6006 * nto-tdep.c: Ditto.
6007 * nto-tdep.h: Ditto.
6008 * objc-exp.y: Ditto.
6009 * objc-lang.c: Ditto.
6010 * objfiles.c: Ditto.
6011 * objfiles.h: Ditto.
6012 * observer.c: Ditto.
6013 * opencl-lang.c: Ditto.
6016 * parser-defs.h: Ditto.
6019 * posix-hdep.c: Ditto.
6020 * ppcbug-rom.c: Ditto.
6021 * ppc-linux-nat.c: Ditto.
6022 * ppc-linux-tdep.c: Ditto.
6023 * ppc-linux-tdep.h: Ditto.
6024 * ppcnbsd-tdep.c: Ditto.
6025 * ppcobsd-tdep.c: Ditto.
6026 * ppcobsd-tdep.h: Ditto.
6027 * ppc-sysv-tdep.c: Ditto.
6028 * ppc-tdep.h: Ditto.
6029 * printcmd.c: Ditto.
6030 * proc-abi.c: Ditto.
6031 * proc-flags.c: Ditto.
6033 * proc-utils.h: Ditto.
6034 * progspace.h: Ditto.
6035 * prologue-value.c: Ditto.
6036 * prologue-value.h: Ditto.
6037 * psympriv.h: Ditto.
6039 * p-typeprint.c: Ditto.
6040 * p-valprint.c: Ditto.
6041 * ravenscar-sparc-thread.c: Ditto.
6042 * ravenscar-thread.c: Ditto.
6043 * ravenscar-thread.h: Ditto.
6045 * regcache.c: Ditto.
6046 * regcache.h: Ditto.
6048 * remote-fileio.c: Ditto.
6049 * remote-fileio.h: Ditto.
6051 * remote-m32r-sdi.c: Ditto.
6052 * remote-mips.c: Ditto.
6053 * remote-sim.c: Ditto.
6054 * rs6000-aix-tdep.c: Ditto.
6055 * rs6000-nat.c: Ditto.
6056 * rs6000-tdep.c: Ditto.
6058 2011-01-10 Michael Snyder <msnyder@vmware.com>
6060 * charset.c (validate): Internationalization.
6061 * coffread.c (read_one_sym): Ditto.
6062 * dwarf2read.c (dwarf2_attach_fields_to_type): Ditto.
6063 * h8300-tdep.c (H8300_extract_return_value): Ditto.
6064 * inflow.c (new_tty): Ditto.
6065 * iq2000-tdep.c (iq2000_breakpoint_from_pc): Ditto.
6066 * m32c-tdep.c (m32c_return_value): Ditto.
6067 * mep-tdep.c (mep_store_return_value): Ditto.
6068 * score-tdep.c (score7_fetch_insn): Ditto.
6069 * ser-mingw.c (pipe_windows_open): Ditto.
6070 * sh64-tdep.c (sh64_extract_return_value): Ditto.
6071 * spu-tdep.c (spu_register_type): Ditto.
6072 * tracepoint.c (trace_find_command): Ditto.
6073 * valarith.c (value_pos): Ditto.
6075 2011-01-10 Joel Brobecker <brobecker@adacore.com>
6077 * ada-valprint.c (printstr): Minor comment reformatting.
6079 2011-01-08 Michael Snyder <msnyder@vmware.com>
6081 * m32r-rom.c (m32r_upload_command): Fix up ARI warnings for _
6084 2011-01-08 Michael Snyder <msnyder@vmware.com>
6086 * h8300-tdep.c: Comment cleanup, mostly periods and spaces.
6087 * hppa-hpux-tdep.c: Ditto.
6088 * hppa-linux-nat.c: Ditto.
6089 * hppa-linux-tdep.c: Ditto.
6090 * hppanbsd-tdep.c: Ditto.
6091 * hppa-tdep.c: Ditto.
6092 * hppa-tdep.h: Ditto.
6093 * hpux-thread.c: Ditto.
6094 * i386-cygwin-tdep.c: Ditto.
6095 * i386-darwin-nat.c: Ditto.
6096 * i386gnu-nat.c: Ditto.
6097 * i386-linux-nat.c: Ditto.
6098 * i386-linux-tdep.c: Ditto.
6099 * i386-nat.c: Ditto.
6100 * i386-nat.h: Ditto.
6101 * i386nbsd-tdep.c: Ditto.
6102 * i386-sol2-nat.c: Ditto.
6103 * i386-stub.c: Ditto.
6104 * i386-tdep.c: Ditto.
6105 * i386-tdep.h: Ditto.
6106 * i387-tdep.c: Ditto.
6107 * ia64-linux-nat.c: Ditto.
6108 * ia64-linux-tdep.c: Ditto.
6109 * ia64-tdep.c: Ditto.
6113 * inferior.c: Ditto.
6114 * inferior.h: Ditto.
6120 * iq2000-tdep.c: Ditto.
6121 * irix5-nat.c: Ditto.
6127 * jv-typeprint.c: Ditto.
6128 * jv-valprint.c: Ditto.
6129 * language.c: Ditto.
6130 * language.h: Ditto.
6131 * linespec.c: Ditto.
6132 * linux-fork.c: Ditto.
6133 * linux-nat.c: Ditto.
6134 * linux-thread-db.c: Ditto.
6135 * lm32-tdep.c: Ditto.
6137 2011-01-08 Michael Snyder <msnyder@vmware.com>
6139 * m2-exp.y: Comment cleanup, mostly periods and spaces.
6141 * m2-typeprint.c: Ditto.
6142 * m2-valprint.c: Ditto.
6143 * m32c-tdep.c: Ditto.
6144 * m32r-linux-nat.c: Ditto.
6145 * m32r-rom.c: Ditto.
6146 * m32r-tdep.c: Ditto.
6147 * m32r-tdep.h: Ditto.
6148 * m68hc11-tdep.c: Ditto.
6149 * m58klinux-nat.c: Ditto.
6150 * m68k-tdep.c: Ditto.
6151 * m88k-tdep.c: Ditto.
6152 * m88k-tdep.h: Ditto.
6153 * machoread.c: Ditto.
6154 * macrocmd.c: Ditto.
6155 * macroexp.c: Ditto.
6156 * macrotab.c: Ditto.
6159 * mdebugread.c: Ditto.
6160 * mdebugread.h: Ditto.
6163 * memory-map.h: Ditto.
6164 * mep-tdep.c: Ditto.
6165 * microblaze-rom.c: Ditto.
6166 * microblaze-tdep.c: Ditto.
6168 * mips-irix-tdep.c: Ditto.
6169 * mips-linux-nat.c: Ditto.
6170 * mips-linux-tdep.c: Ditto.
6171 * mips-linux-tdep.h: Ditto.
6172 * mipsnbsd-nat.c: Ditto.
6173 * mipsnbsd-tdep.c: Ditto.
6174 * mipsread.c: Ditto.
6175 * mips-tdep.c: Ditto.
6176 * mips-tdep.h: Ditto.
6177 * mn10300-linux-tdep.c: Ditto.
6178 * mn10300-tdep.c: Ditto.
6179 * mn10300-tdep.h: Ditto.
6182 * moxie-tdep.c: Ditto.
6183 * moxie-tdep.h: Ditto.
6186 2011-01-08 Mike Frysinger <vapier@gentoo.org>
6188 * bfin-tdep.h (BFIN_A0_DOT_W_REGNUM): Fix typo in name.
6190 2011-01-08 Robert Millan <rmh@gnu.org>
6192 * fbsd-nat.c (fbsd_find_memory_regions): Fix typo.
6194 2011-01-07 Michael Snyder <msnyder@vmware.com>
6196 * charset.c (_initialize_charset): Fix typo in string.
6198 2011-01-07 Michael Snyder <msnyder@vmware.com>
6200 * mi/mi-cmd-disas.c (mi_cmd_disassemble): Mark up error message
6202 * tui/tui-layout.c (tui_set_layout_for_display_command):
6203 Split line so that operator goes to beginning of line.
6204 * tui/tui-winsource.c (tui_horizontal_source_scroll): Move
6205 assignment out of if statement.
6207 2011-01-07 Michael Snyder <msnyder@vmware.com>
6209 * ada-lang.c: Comment cleanup, mostly periods and spaces.
6210 * ada-lang.h: Ditto.
6211 * ada-tasks.c: Ditto.
6212 * ada-valprint.c: Ditto.
6213 * aix-threads.c: Ditto.
6214 * alpha-linux-nat.c: Ditto.
6215 * alpha-linux-tdep.c: Ditto.
6216 * alpha-mdebug-tdep.c: Ditto.
6217 * alpha-nat.c: Ditto.
6218 * alpha-osf1-tdep.c: Ditto.
6219 * alpha-tdep.c: Ditto.
6220 * alphabsd-nat.c: Ditto.
6221 * alphabsd-tdep.c: Ditto.
6222 * amd64-darwin-tdep.c: Ditto.
6223 * amd64-linux-nat.c: Ditto.
6224 * amd64-linux-tdep.c: Ditto.
6225 * amd64-sol2-tdep.c: Ditto.
6226 * amd64-tdep.c: Ditto.
6227 * amd64-fbsd-tdep.c: Ditto.
6228 * amd64-nbsd-tdep.c: Ditto.
6229 * amd64-obsd-tdep.c: Ditto.
6230 * amd64-linux-nat.c: Ditto.
6231 * amd64-linux-tdep.c: Ditto.
6232 * arm-tdep.c: Ditto.
6233 * arm-tdep.h: Ditto.
6234 * armnbsd-nat.c: Ditto.
6235 * avr-tdep.c: Ditto.
6236 * bfin-tdep.c: Ditto.
6238 * c-typeprintc: Ditto.
6239 * c-valprint.c: Ditto.
6240 * coff-pe-read.h: Ditto.
6241 * coffreead.c: Ditto.
6242 * cris-tdep.c: Ditto.
6244 * darwin-nat-info.c: Ditto.
6245 * darwin-nat.c: Ditto.
6246 * dbug-rom.c: Ditto.
6250 * dec-thread.c: Ditto.
6252 * demangle.c: Ditto.
6253 * dicos-tdep.c: Ditto.
6254 * dictionary.c: Ditto.
6255 * dictionary.h: Ditto.
6256 * dink32-rom.c: Ditto.
6258 * doublest.c: Ditto.
6260 * dummy-frame.c: Ditto.
6261 * dwarf2-frame.c: Ditto.
6262 * dwarf2expr.c: Ditto.
6263 * dwarf2loc.c: Ditto.
6264 * dwarf2read.c: Ditto.
6268 * event-top.h: Ditto.
6269 * exceptions.c: Ditto.
6270 * exceptions.h: Ditto.
6272 * expprint.c: Ditto.
6273 * expression.h: Ditto.
6277 * f-typeprint.c: Ditto.
6278 * f-valprint.c: Ditto.
6279 * fbsd-nat.c: Ditto.
6281 * fork-child.c: Ditto.
6284 * frv-linux-tdep.c: Ditto.
6285 * frv-tdep.c: Ditto.
6287 * gdb-stabs.h: Ditto.
6288 * gdb_assert.h: Ditto.
6289 * gdb_string.h: Ditto.
6290 * gdb_thread_db.h: Ditto.
6291 * gdb_wait.h: Ditto.
6292 * gdbarch.sh: Ditto.
6294 * gdbthread.h: Ditto.
6295 * gdbtypes.c: Ditto.
6296 * gdbtypes.h: Ditto.
6299 * gnu-v2-abi.c: Ditto.
6300 * gnu-v3-abi.c: Ditto.
6301 * go32-nat.c: Ditto.
6302 * gdbarch.c: Regenerate.
6303 * gdbarch.h: Regenerate.
6305 2011-01-07 Michael Snyder <msnyder@vmware.com>
6307 * ax-gdb.c: Adjust some long output strings.
6308 * breakpoint.c: Ditto.
6313 * linux-nat.c: Ditto.
6314 * solib-pa64.c: Ditto.
6315 * solib-som.c: Ditto.
6317 2011-01-06 Tom Tromey <tromey@redhat.com>
6321 * python/python.c (GdbMethods): Add "newest_frame" method.
6322 * python/python-internal.h (gdbpy_newest_frame): Declare.
6323 * python/py-frame.c (gdbpy_newest_frame): New function.
6325 2010-01-06 Paul Pluzhnikov <ppluzhnikov@google.com>
6327 * jit.h (struct jit_code_entry): use ULONGEST for symfile_size.
6328 * jit.c (jit_debug): New variable.
6329 (show_jit_debug): New function.
6330 (struct target_buffer): Use ULONGEST.
6331 (bfd_open_from_target_memory): Likewise.
6332 (jit_register_code, jit_inferior_init): Add debug output.
6333 (_initialize_jit): Register "debug jit" command.
6335 2011-01-06 Tom Tromey <tromey@redhat.com>
6337 * frame.h (enum frame_type) <INLINE_FRAME>: Fix comment.
6338 * python/py-frame.c (gdbpy_initialize_frames): Add INLINE_FRAME
6341 2011-01-06 Tom Tromey <tromey@redhat.com>
6343 * python/py-frame.c (frapy_block): Use get_frame_block.
6345 2011-01-06 Joel Brobecker <brobecker@adacore.com>
6347 Do not stop on SIGPRIO signals by default
6348 * infrun.c (_initialize_infrun): Unset signal_stop and
6349 signal_print for TARGET_SIGNAL_PRIO.
6351 2011-01-06 Joel Brobecker <brobecker@adacore.com>
6353 * ada-tasks.c: Fix style violation in comment.
6355 2011-01-06 Joel Brobecker <brobecker@adacore.com>
6357 * linespec.c (decode_compound, find_method): Remove trailing \n
6358 at end of error string.
6359 * solib-irix.c (irix_current_sos): Likewise.
6360 * varobj.c (uninstall_variable): Likewise.
6362 2011-01-06 Joel Brobecker <brobecker@adacore.com>
6364 * copyright.py: New script.
6365 * copyright.sh (byhand): Add *.ads, *.adb, *.gpr and *.inc.
6366 Launch emacs without exec'ing. Call copyright.py afterwards.
6368 2011-01-05 Michael Snyder <msnyder@vmware.com>
6370 * addrmap.c: Shorten lines of >= 80 columns.
6371 * arch-utils.c: Ditto.
6372 * arch-utils.h: Ditto.
6374 * ax-general.c: Ditto.
6376 * blockframe.c: Ditto.
6377 * breakpoint.c: Ditto.
6378 * buildsym.c: Ditto.
6380 * c-typeprint.c: Ditto.
6382 * coffread.c: Ditto.
6386 * cp-namespace.c: Ditto.
6387 * cp-support.c: Ditto.
6388 * dbug-rom.c: Ditto.
6393 * dictionary.c: Ditto.
6395 * doublest.c: Ditto.
6396 * dwarf2-frame.c: Ditto.
6397 * dwarf2expr.c: Ditto.
6398 * dwarf2loc.c: Ditto.
6399 * dwarf2read.c: Ditto.
6402 * event-loop.c: Ditto.
6403 * event-loop.h: Ditto.
6404 * exceptions.h: Ditto.
6406 * expprint.c: Ditto.
6407 * expression.h: Ditto.
6409 * f-valprint.c: Ditto.
6411 * frame-base.c: Ditto.
6412 * frame-unwind.c: Ditto.
6413 * frame-unwind.h: Ditto.
6417 * gdb-stabs.h: Ditto.
6418 * gdb_assert.h: Ditto.
6419 * gdb_dirent.h: Ditto.
6420 * gdb_obstack.h: Ditto.
6422 * gdbtypes.c: Ditto.
6423 * gdbtypes.h: Ditto.
6424 * inf-ttrace.c: Ditto.
6429 * inline-frame.h: Ditto.
6430 * language.c: Ditto.
6431 * language.h: Ditto.
6432 * libunwind-frame.c: Ditto.
6433 * libunwind-frame.h: Ditto.
6434 * linespec.c: Ditto.
6435 * linux-nat.c: Ditto.
6436 * linux-nat.h: Ditto.
6437 * linux-thread-db.c: Ditto.
6438 * machoread.c: Ditto.
6439 * macroexp.c: Ditto.
6440 * macrotab.c: Ditto.
6443 * mdebugread.c: Ditto.
6448 * objfiles.c: Ditto.
6449 * objfiles.h: Ditto.
6451 * p-typeprint.c: Ditto.
6452 * p-valprint.c: Ditto.
6454 * printcmd.c: Ditto.
6455 * proc-events.c: Ditto.
6457 * progspace.c: Ditto.
6458 * progspace.h: Ditto.
6459 * psympriv.h: Ditto.
6462 * regcache.c: Ditto.
6463 * regcache.h: Ditto.
6464 * remote-fileio.c: Ditto.
6466 * ser-mingw.c: Ditto.
6468 * ser-unix.c: Ditto.
6471 * solib-frv.c: Ditto.
6472 * solib-irix.c: Ditto.
6473 * solib-osf.c: Ditto.
6474 * solib-pa64.c: Ditto.
6475 * solib-som.c: Ditto.
6476 * solib-sunos.c: Ditto.
6477 * solib-svr4.c: Ditto.
6478 * solib-target.c: Ditto.
6482 * stabsread.c: Ditto.
6483 * stabsread.c: Ditto.
6486 * symfile-mem.c: Ditto.
6492 * target-descriptions.c: Ditto.
6493 * target-memory.c: Ditto.
6496 * terminal.h: Ditto.
6499 * tracepoint.c: Ditto.
6500 * tracepoint.h: Ditto.
6504 * user-regs.c: Ditto.
6505 * user-regs.h: Ditto.
6507 * valarith.c: Ditto.
6509 * valprint.c: Ditto.
6510 * valprint.h: Ditto.
6515 * xcoffread.c: Ditto.
6516 * xcoffsolib.c: Ditto.
6517 * xcoffsolib.h: Ditto.
6518 * xml-syscall.c: Ditto.
6519 * xml-tdesc.c: Ditto.
6521 2011-01-05 Michael Snyder <msnyder@vmware.com>
6523 * cli/cli-cmds.c: Shorten lines of >= 80 columns.
6524 * cli/cli-decode.c: Ditto.
6525 * cli/cli-dump.c: Ditto.
6526 * cli/cli-logging.c: Ditto.
6527 * cli/cli-script.c: Ditto.
6528 * cli/cli-setshow.c: Ditto.
6529 * common/signals.c: Ditto.
6530 * mi/mi-cmd-break.c: Ditto.
6531 * mi/mi-cmd-disas.c: Ditto.
6532 * mi/mi-cmd-stack.c: Ditto.
6533 * mi/mi-cmd-var.c: Ditto.
6534 * mi/mi-cmds.c: Ditto.
6535 * mi/mi-common.h: Ditto.
6536 * mi/mi-console.c: Ditto.
6537 * mi/mi-interp.c: Ditto.
6538 * mi/mi-main.c: Ditto.
6539 * osf-share/cma_attr.c: Ditto.
6540 * osf-share/cma_deb_core.h: Ditto.
6541 * osf-share/cma_debug_client.h: Ditto.
6542 * osf-share/cma_handle.h: Ditto.
6543 * osf-share/cma_mutex.h: Ditto.
6544 * osf-share/cma_stack_int.h: Ditto.
6545 * osf-share/cma_tcb_defs.h: Ditto.
6546 * python/py-auto-load.c: Ditto.
6547 * python/py-breakpoint.c: Ditto.
6548 * python/py-cmd.c: Ditto.
6549 * python/py-frame.c: Ditto.
6550 * python/py-objfile.c: Ditto.
6551 * python/py-param.c: Ditto.
6552 * python/py-progspace.c: Ditto.
6553 * python/py-symbol.c: Ditto.
6554 * python/py-value.c: Ditto.
6555 * python/python-internal.h: Ditto.
6556 * python/python.c: Ditto.
6557 * tui/tui-data.c: Ditto.
6558 * tui/tui-disasm.c: Ditto.
6559 * tui/tui-hooks.c: Ditto.
6560 * tui/tui-io.c: Ditto.
6561 * tui/tui-layout.c: Ditto.
6562 * tui/tui-regs.c: Ditto.
6563 * tui/tui-source.c: Ditto.
6564 * tui/tui-stack.c: Ditto.
6565 * tui/tui-win.c: Ditto.
6566 * tui/tui-windata.c: Ditto.
6567 * tui/tui-winsource.c: Ditto.
6569 2011-01-05 Joel Brobecker <brobecker@adacore.com>
6571 * configure.ac, gdb.1: Copyright year update.
6573 2011-01-03 Jan Kratochvil <jan.kratochvil@redhat.com>
6575 * frame.c (get_prev_frame_1) <UNWIND_INNER_ID>: New variables
6576 this_pc_in_block, morestack_msym and morestack_name. Check for
6577 "__morestack" minimal symbol there.
6579 2011-01-03 Joel Brobecker <brobecker@adacore.com>
6581 * symfile.c (find_sym_fns): Add call to dont_repeat.
6583 2011-01-01 Joel Brobecker <brobecker@adacore.com>
6585 Copyright year update in most files (performed by copyright.sh).
6587 2011-01-01 Joel Brobecker <brobecker@adacore.com>
6589 * top.c (print_gdb_version): Update copyright year in version output.
6591 For older changes see ChangeLog-2010.
6597 version-control: never