1 2015-07-27 Simon Marchi <simon.marchi@ericsson.com>
3 * valprint.c (generic_val_print): Factor out function/method
5 (generic_val_print_func): ... this new function.
7 2015-07-27 Simon Marchi <simon.marchi@ericsson.com>
9 * valprint.c (generic_val_print): Factor out flags
11 (generic_val_print_flags): ... this new function.
13 2015-07-27 Simon Marchi <simon.marchi@ericsson.com>
15 * valprint.c (generic_val_print): Factor out enum
17 (generic_val_print_enum): ... this new function.
19 2015-07-27 Simon Marchi <simon.marchi@ericsson.com>
21 * valprint.c (generic_val_print): Factor out reference
23 (generic_val_print_ref): ... this new function.
25 2015-07-27 Simon Marchi <simon.marchi@ericsson.com>
27 * valprint.c (generic_val_print): Factor out memberptr
29 (generic_val_print_memberptr): ... this new function.
31 2015-07-27 Simon Marchi <simon.marchi@ericsson.com>
33 * valprint.c (generic_val_print): Factor out pointer
35 (generic_val_print_ptr): ... this new function.
37 2015-07-27 Simon Marchi <simon.marchi@ericsson.com>
39 * valprint.c (generic_val_print): Factor out array
41 (generic_val_print_array): ... this new function.
43 2015-07-27 Simon Marchi <simon.marchi@ericsson.com>
45 * valprint.c (generic_val_print): Factor out
46 print_unpacked_pointer code to ...
47 (print_unpacked_pointer): ... this new function.
49 2015-07-27 Patrick Palka <patrick@parcs.ath.cx>
51 * event-top.c (handle_sigterm): Don't inspect
52 target_can_async_p. Always set the quit flag and always mark
53 the async signal handler.
55 2015-07-27 Yao Qi <yao.qi@linaro.org>
57 * Makefile.in (REMOTE_EXAMPLES): Remove it.
59 2015-07-25 Kevin Buettner <kevinb@redhat.com>
61 * remote.c (read_ptid): Return null_ptid when no thread id
63 (remote_current_thread): Add log warning for malformed
65 (remote_start_remote): Add log warning when current thread
68 2015-07-24 Pedro Alves <palves@redhat.com>
70 * s390-linux-nat.c (fetch_regs, store_regs, fetch_fpregs)
71 (s390_stopped_by_watchpoint, s390_prepare_to_resume): Pass 0 as
72 forth argument to ptrace PTRACE_PEEKUSR_AREA/PTRACE_POKEUSR_AREA.
74 2015-07-24 Pedro Alves <palves@redhat.com>
77 * linux-nat.c (linux_nat_filter_event): Don't assert that the lwp
78 is resumed, and extend the debug log.
80 2015-07-24 Pedro Alves <palves@redhat.com>
82 * fork-child.c (fork_inferior): Print argv[0] instead of exec_file.
84 2015-07-24 Pedro Alves <palves@redhat.com>
86 * aarch64-linux-nat.c: Include nat/gdb_ptrace.h instead of
88 * alpha-linux-nat.c: Likewise.
89 * amd64-linux-nat.c: Likewise.
90 * arm-linux-nat.c: Likewise.
91 * hppa-linux-nat.c: Likewise.
92 * i386-linux-nat.c: Likewise.
93 * ia64-linux-nat.c: Likewise.
94 * linux-fork.c: Likewise.
95 * linux-nat.c: Likewise.
96 * m32r-linux-nat.c: Likewise.
97 * m68klinux-nat.c: Likewise.
98 * mips-linux-nat.c: Likewise.
99 * nat/linux-btrace.c: Likewise.
100 * nat/linux-ptrace.c: Likewise.
102 * nat/mips-linux-watch.c: Likewise.
103 * nat/x86-linux-dregs.c: Likewise.
104 * ppc-linux-nat.c: Likewise.
105 * s390-linux-nat.c: Likewise.
106 * spu-linux-nat.c: Likewise.
107 * tilegx-linux-nat.c: Likewise.
108 * x86-linux-nat.c: Likewise.
109 * xtensa-linux-nat.c: Likewise.
111 2015-07-24 Pedro Alves <palves@redhat.com>
113 * ptrace.m4 (ptrace tests): Test in C++ mode. Try with 'enum
114 __ptrace_request as first parameter type instead of int.
115 (PTRACE_TYPE_ARG1): Define.
116 * nat/gdb_ptrace.h [!PTRACE_TYPE_ARG5] (ptrace): Define as wrapper
117 that casts first argument to PTRACE_TYPE_ARG1.
118 * config.in: Regenerate.
119 * configure: Regenerate.
121 2015-07-24 Pedro Alves <palves@redhat.com>
123 * gdb_ptrace.h: Move ...
124 * nat/gdb_ptrace.h: ... here.
125 * inf-ptrace.c: Adjust.
127 2015-07-24 Pedro Alves <palves@redhat.com>
129 * acinclude.m4: Include ptrace.m4.
130 * configure.ac: Call GDB_AC_PTRACE and move ptrace checks ...
131 * ptrace.m4: ... to this new file.
133 2015-07-23 Doug Evans <dje@google.com>
135 * dwarf2read.c (dwarf2_per_cu_data): Add comment.
136 (load_cu): Handle dummy CUs.
137 (dw2_do_instantiate_symtab, process_queuef): Ditto.
138 (dwarf2_fetch_die_loc_sect_off, dwarf2_fetch_constant_bytes): Ditto.
140 2015-07-23 Ciro Santilli <ciro.santilli@gmail.com> (tiny patch)
142 * py-linetable.c (ltpy_get_all_source_lines): Adjust function
143 documentation to say that it returns a list rather than
145 (linetable_object_methods): Update the docstring of the
148 2015-07-23 Pierre-Marie de Rodat <derodat@adacore.com>
150 * gdbtypes.c (resolve_dynamic_array): Pass the peeled element
151 type to the recursive call instead of the original (maybe
152 TYPE_CODE_TYPEDEF) type.
154 2015-07-23 Yao Qi <yao.qi@linaro.org>
156 * aarch64-linux-nat.c (aarch64_linux_can_use_hw_breakpoint): If
157 TYPE is watchpoint, return zero if aarch64_num_wp_regs is zero.
158 If TYPE is breakpoint, return zero if arch64_num_bp_regs is zero.
160 2015-07-21 Yao Qi <yao.qi@linaro.org>
162 * aarch64-linux-nat.c (aarch64_linux_get_debug_reg_capacity):
163 Move it to nat/aarch64-linux-hw-point.c.
164 (aarch64_linux_child_post_startup_inferior): Update.
165 * nat/aarch64-linux-hw-point.c (aarch64_linux_get_debug_reg_capacity):
167 * nat/aarch64-linux-hw-point.h (aarch64_linux_get_debug_reg_capacity):
170 2015-07-21 Markus Metzger <markus.t.metzger@intel.com>
172 * common/btrace-common.c (btrace_data_append): Change case label.
174 2015-07-20 Yao Qi <yao.qi@linaro.org>
176 * nat/aarch64-linux-hw-point.c (aarch64_handle_unaligned_watchpoint):
178 * nat/aarch64-linux-hw-point.h: Use ULONGEST rather than
179 "unsigned long long".
181 2015-07-18 Kevin Buettner <kevinb@redhat.com>
183 * dwarf2read.c (dwarf2_locate_sections): Allow has_section_at_zero
184 to be set for SEC_ALLOC sections too.
186 2015-07-17 Yao Qi <yao.qi@linaro.org>
188 * Makefile.in (HFILES_NO_SRCDIR): Add
189 nat/aarch64-linux-hw-point.h.
190 (aarch64-linux-hw-point.o): New rule.
191 * nat/aarch64-linux-hw-point.h: New file.
192 * nat/aarch64-linux-hw-point.c: New file.
193 * aarch64-linux-nat.c: Include nat/aarch64-linux-hw-point.h.
194 (AARCH64_HBP_MAX_NUM): Move to nat/aarch64-linux-hw-point.h.
195 (AARCH64_HWP_MAX_NUM, AARCH64_HBP_ALIGNMENT): Likewise.
196 (AARCH64_HWP_ALIGNMENT): Likewise.
197 (AARCH64_HWP_MAX_LEN_PER_REG): Likewise.
198 (AARCH64_DEBUG_NUM_SLOTS, AARCH64_DEBUG_ARCH): Likewise.
199 (AARCH64_DEBUG_ARCH_V8, DR_MARK_ALL_CHANGED): Likewise.
200 (DR_MARK_N_CHANGED, DR_CLEAR_CHANGED): Likewise.
201 (DR_HAS_CHANGED, DR_N_HAS_CHANGE): Likewise.
202 (aarch64_num_bp_regs, aarch64_num_wp_regs): Likewise.
203 (struct aarch64_debug_reg_state): Likewise.
204 (struct arch_lwp_info): Likewise.
205 (aarch64_linux_set_debug_regs): Likewise.
206 (aarch64_notify_debug_reg_change): Remove static.
207 (aarch64_align_watchpoint): Likewise.
208 (DR_CONTROL_ENABLED, DR_CONTROL_LENGTH): Likewise.
209 (aarch64_watchpoint_length): Likewise.
210 (aarch64_point_encode_ctrl_reg): Likewise
211 (aarch64_point_is_aligned): Likewise.
212 (aarch64_dr_state_insert_one_point): Likewise.
213 (aarch64_dr_state_remove_one_point): Likewise.
214 (aarch64_handle_breakpoint): Likewise.
215 (aarch64_handle_aligned_watchpoint): Likewise.
216 (aarch64_handle_unaligned_watchpoint): Likewise.
217 (aarch64_handle_watchpoint): Likewise.
218 * config/aarch64/linux.mh (NAT_FILE): Add
219 aarch64-linux-hw-point.o.
221 2015-07-17 Yao Qi <yao.qi@linaro.org>
223 * aarch64-linux-nat.c (aarch64_handle_breakpoint): Add argument
224 state and don't call aarch64_get_debug_reg_state. All callers
226 (aarch64_linux_insert_hw_breakpoint): Call
227 aarch64_get_debug_reg_state earlier.
228 (aarch64_linux_remove_hw_breakpoint): Likewise.
229 (aarch64_handle_aligned_watchpoint): Add argument state and
230 don't call aarch64_get_debug_reg_state. All callers update.
231 (aarch64_handle_unaligned_watchpoint): Likewise.
232 (aarch64_handle_watchpoint): Add argument state.
233 (aarch64_linux_insert_watchpoint): Call aarch64_get_debug_reg_state
235 (aarch64_linux_remove_watchpoint): Likewise.
237 2015-07-17 Yao Qi <yao.qi@linaro.org>
239 * aarch64-linux-nat.c (aarch64_show_debug_reg_state): Use
241 (aarch64_handle_unaligned_watchpoint): Likewise.
243 2015-07-17 Yao Qi <yao.qi@linaro.org>
245 * aarch64-linux-nat.c (aarch64_dr_state_insert_one_point): Change
246 argument type's type to 'enum target_hw_bp_type'.
247 (aarch64_dr_state_remove_one_point): Likewise.
248 (aarch64_handle_breakpoint): Likewise.
249 (aarch64_linux_insert_hw_breakpoint): Likewise.
250 (aarch64_linux_remove_hw_breakpoint): Likewise.
251 (aarch64_handle_aligned_watchpoint): Likewise.
253 2015-07-17 Yao Qi <yao.qi@linaro.org>
255 * aarch64-linux-nat.c (aarch64_linux_get_debug_reg_capacity): Call
256 ptid_get_pid instead of get_thread_id.
258 2015-07-17 Yao Qi <yao.qi@linaro.org>
260 * remote.c (get_current_thread): Initialise ptid to null_ptid.
261 (add_current_inferior_and_thread): Don't initialise ptid.
263 2015-07-16 Pierre Langlois <pierre.langlois@arm.com>
265 * aarch64-tdep.c (aarch64_pseudo_read_value): Mark S register as
266 unavailable if invalid.
268 2015-07-15 Jan Kratochvil <jan.kratochvil@redhat.com>
270 Revert the previous 6 commits:
271 Create empty nat/linux-maps.[ch] and common/target-utils.[ch].
272 Move gdb_regex* to common/
273 Prepare linux_find_memory_regions_full & co. for move
274 Move linux_find_memory_regions_full & co.
275 gdbserver build-id attribute generator
276 Validate symbol file using build-id
278 2015-07-15 Aleksandar Ristovski <aristovski@qnx.com
279 Jan Kratochvil <jan.kratochvil@redhat.com>
281 Validate symbol file using build-id.
282 * NEWS (Changes since GDB 7.10): Add 'set validate-build-id'
283 and 'show validate-build-id'. Add build-id attribute.
284 * solib-darwin.c (_initialize_darwin_solib): Assign validate value.
285 * solib-dsbt.c (_initialize_dsbt_solib): Ditto.
286 * solib-frv.c (_initialize_frv_solib): Ditto.
287 * solib-spu.c (set_spu_solib_ops): Ditto.
288 * solib-svr4.c: Include rsp-low.h.
289 (NOTE_GNU_BUILD_ID_NAME): New define.
290 (svr4_validate): New function.
291 (svr4_copy_library_list): Duplicate field build_id.
292 (library_list_start_library): Parse 'build-id' attribute.
293 (svr4_library_attributes): Add 'build-id' attribute.
294 (_initialize_svr4_solib): Assign validate value.
295 * solib-target.c (solib.h): Include.
296 (_initialize_solib_target): Assign validate value.
297 * solib.c (validate_build_id, show_validate_build_id): New.
298 (solib_map_sections): Use ops->validate.
299 (clear_so): Free build_id.
300 (default_solib_validate): New function.
301 (_initialize_solib): Add "validate-build-id".
302 * solib.h (default_solib_validate): New declaration.
303 * solist.h (struct so_list): New fields 'build_idsz' and 'build_id'.
304 (target_so_ops): New field 'validate'.
306 2015-07-15 Aleksandar Ristovski <aristovski@qnx.com
307 Jan Kratochvil <jan.kratochvil@redhat.com>
309 gdbserver build-id attribute generator.
310 * features/library-list-svr4.dtd (library-list-svr4): New
311 'build-id' attribute.
313 2015-07-15 Aleksandar Ristovski <aristovski@qnx.com
314 Jan Kratochvil <jan.kratochvil@redhat.com>
316 Move linux_find_memory_regions_full & co.
317 * linux-tdep.c (nat/linux-maps.h): Include.
318 (gdb_regex.h): Remove the include.
319 (enum filterflags, struct smaps_vmflags, read_mapping, decode_vmflags)
320 (mapping_is_anonymous_p, dump_mapping_p): Moved to nat/linux-maps.c.
321 (linux_find_memory_region_ftype): Moved typedef to nat/linux-maps.h.
322 (linux_find_memory_regions_full): Moved definition to nat/linux-maps.c.
323 * nat/linux-maps.c: Include ctype.h, target/target-utils.h, gdb_regex.h
325 (struct smaps_vmflags, read_mapping, decode_vmflags)
326 (mapping_is_anonymous_p, dump_mapping_p): Move from linux-tdep.c.
327 (linux_find_memory_regions_full): Move from linux-tdep.c.
328 * nat/linux-maps.h (read_mapping): New declaration.
329 (linux_find_memory_region_ftype, enum filterflags): Moved from
331 (linux_find_memory_regions_full): New declaration.
332 * target.c (target/target-utils.h): Include.
333 (read_alloc_pread_ftype): Moved typedef to target/target-utils.h.
334 (read_alloc, read_stralloc_func_ftype, read_stralloc): Moved
335 definitions to target/target-utils.c.
336 * target.h (target_fileio_read_stralloc): Move it to target/target.h.
337 * target/target-utils.c (read_alloc, read_stralloc): Move definitions
339 * target/target-utils.h (read_alloc_pread_ftype): New typedef.
340 (read_alloc): New declaration.
341 (read_stralloc_func_ftype): New typedef.
342 (read_stralloc): New declaration.
343 * target/target.h (target_fileio_read_stralloc): Move it from target.h.
345 2015-07-15 Aleksandar Ristovski <aristovski@qnx.com
346 Jan Kratochvil <jan.kratochvil@redhat.com>
348 Prepare linux_find_memory_regions_full & co. for move.
349 * linux-tdep.c (linux_find_memory_region_ftype): Comment.
350 (linux_find_memory_regions_full): Change signature and prepare
351 for moving to linux-maps.
352 (linux_find_memory_regions_data): Rename field 'obfd' to 'data'.
353 (linux_find_memory_regions_thunk): New.
354 (linux_find_memory_regions_thunk): Use 'data' field instead of 'obfd'.
355 (linux_find_memory_regions_gdb): New.
356 (linux_find_memory_regions): Rename argument 'obfd' to 'func_data'.
357 (linux_make_mappings_corefile_notes): Use
358 linux_find_memory_regions_gdb.
359 * target.c (read_alloc_pread_ftype): New typedef.
360 (target_fileio_read_alloc_1_pread): New function.
361 (read_alloc): Refactor from target_fileio_read_alloc_1.
362 (read_stralloc_func_ftype): New typedef.
363 (target_fileio_read_alloc_1): New implementation. Use read_alloc.
364 (read_stralloc): Refactored from target_fileio_read_stralloc.
365 (target_fileio_read_stralloc): New implementation, use read_stralloc.
367 2015-07-15 Jan Kratochvil <jan.kratochvil@redhat.com>
369 * Makefile.in (HFILES_NO_SRCDIR): Change gdb_regex.h to
371 (COMMON_OBS): Add gdb_regex.o.
373 * common/common.m4 (GDB_AC_COMMON): Add gdb_use_included_regex,
374 --without-included-regex and USE_INCLUDED_REGEX.
375 * common/gdb_regex.c: New file from utils.c functions.
376 * common/gdb_regex.h: Move it here from gdb_regex.h, update include
377 file wrapping define name.
378 * configure: Rebuilt.
379 * configure.ac (gdb_use_included_regex, --without-included-regex)
380 (USE_INCLUDED_REGEX): Move them to common/common.m4.
381 * gdb_regex.h: Move it to common/gdb_regex.h.
382 * utils.c: Remove include gdb_regex.h.
383 (do_regfree_cleanup, make_regfree_cleanup, get_regcomp_error)
384 (compile_rx_or_error): Move them to common/gdb_regex.c.
386 2015-07-15 Aleksandar Ristovski <aristovski@qnx.com
387 Jan Kratochvil <jan.kratochvil@redhat.com>
389 Create empty nat/linux-maps.[ch] and common/target-utils.[ch].
390 * Makefile.in (HFILES_NO_SRCDIR); Add nat/linux-maps.h,
391 common/target-utils.h.
392 (COMMON_OBS): Add target-utils.o.
393 (linux-maps.o, target-utils.o): New.
394 * target/target-utils.c: New file.
395 * target/target-utils.h: New file.
396 * config/i386/linux.mh (NATDEPFILES): Add linux-maps.o.
397 * config/i386/linux64.mh (NATDEPFILES): Ditto.
398 * nat/linux-maps.c: New file.
399 * nat/linux-maps.h: New file.
401 2015-07-15 Markus Metzger <markus.t.metzger@intel.com>
402 Pedro Alves <palves@redhat.com>
404 * nat/linux-btrace.c (perf_event_read): Change the type of DATA_HEAD.
405 (perf_event_read_all): Change the type of SIZE and DATA_HEAD.
406 (perf_event_read_bts): Change the type of SIZE and READ.
407 (linux_enable_bts): Change the type of SIZE, PAGES, DATA_SIZE,
408 and DATA_OFFSET. Move DATA_SIZE declaration. Restrict the buffer size
409 to UINT_MAX. Check for overflows when using DATA_HEAD from the perf
411 (linux_enable_pt): Change the type of PAGES and SIZE. Restrict the
412 buffer size to UINT_MAX.
413 (linux_read_bts): Change the type of BUFFER_SIZE, SIZE, DATA_HEAD, and
415 * nat/linux-btrace.h (struct perf_event_buffer)<size, data_head>
416 <last_head>: Change type.
417 * common/btrace-common.h (struct btrace_dat_pt) <size>: Change type.
418 * common/btrace-common.c (btrace_data_append): Change the type of
420 * btrace.c (parse_xml_raw): Change the type of SIZE. Change oddness
423 2015-07-14 Simon Marchi <simon.marchi@ericsson.com>
425 * gdbtypes.h (CHECK_TYPEDEF): Remove.
426 * aarch64-tdep.c (aarch64_return_in_memory): Replace CHECK_TYPEDEF
428 * ada-lang.c (decode_constrained_packed_array_type): Likewise.
429 (ada_array_length): Likewise.
430 (find_parallel_type_by_descriptive_type): Likewise.
431 (ada_check_typedef): Likewise.
432 * arm-tdep.c (arm_return_in_memory): Likewise.
433 * ax-gdb.c (gen_trace_static_fields): Likewise.
434 (gen_struct_ref_recursive): Likewise.
435 * c-exp.y (exp : SIZEOF '(' type ')' %prec UNARY): Likewise.
436 (variable: block COLONCOLON name): Likewise.
437 (qualified_name: TYPENAME COLONCOLON name): Likewise.
438 * c-lang.c (classify_type): Likewise.
439 * c-typeprint.c (c_print_type): Likewise.
440 (c_print_typedef): Likewise.
441 (c_type_print_base): Likewise.
442 * c-valprint.c (c_val_print): Likewise.
443 * compile/compile-c-types.c (convert_type): Likewise.
444 * compile/compile-object-load.c (get_out_value_type): Likewise.
445 * completer.c (add_struct_fields): Likewise.
446 (expression_completer): Likewise.
447 * cp-namespace.c (cp_find_type_baseclass_by_name): Likewise.
448 (cp_lookup_nested_symbol_1): Likewise.
449 (cp_lookup_nested_symbol): Likewise.
450 * cp-valprint.c (cp_print_value_fields): Likewise.
451 (cp_print_static_field): Likewise.
452 * d-valprint.c (d_val_print): Likewise.
453 * eval.c (evaluate_subexp_standard): Likewise.
454 (evaluate_subexp_for_sizeof): Likewise.
455 * f-exp.y (exp : SIZEOF '(' type ')' %prec UNARY): Likewise.
456 * f-typeprint.c (f_type_print_base): Likewise.
457 * f-valprint.c (f_val_print): Likewise.
458 * gdbtypes.c (get_discrete_bounds): Likewise.
459 (create_array_type_with_stride): Likewise.
460 (type_name_no_tag_or_error): Likewise.
461 (lookup_struct_elt_type): Likewise.
462 (get_unsigned_type_max): Likewise.
463 (internal_type_vptr_fieldno): Likewise.
464 (set_type_vptr_fieldno): Likewise.
465 (internal_type_vptr_basetype): Likewise.
466 (set_type_vptr_basetype): Likewise.
467 (get_vptr_fieldno): Likewise.
468 (is_integral_type): Likewise.
469 (is_scalar_type): Likewise.
470 (is_scalar_type_recursive): Likewise.
471 (distance_to_ancestor): Likewise.
472 (is_unique_ancestor_worker): Likewise.
473 (check_types_equal): Likewise.
474 * gnu-v2-abi.c (gnuv2_value_rtti_type): Likewise.
476 2015-07-14 Iain Buclaw <ibuclaw@gdcproject.org>
478 * dwarf2read.c (find_slot_in_mapped_hash): Extend language support to
479 also test for language_d.
480 (dwarf2_compute_name): Likewise.
481 (read_func_scope): Likewise.
482 (read_structure_type): Likewise.
483 (new_symbol_full): Likewise.
484 (determine_prefix): Likewise.
485 (read_import_statement): Use dot as the separator for language_d.
486 (typename_concat): Likewise, but don't prefix the D main function.
488 2015-07-14 Peter Bergner <bergner@vnet.ibm.com>
490 * nat/linux-namespaces.c (setns): Rename from this ...
491 (do_setns): ... to this. Support calling setns if it exists.
492 (mnsh_handle_setns): Call do_setns.
494 2015-07-13 Yao Qi <yao.qi@linaro.org>
496 * exec.c (exec_file_attach): Add period at the end of error
499 2015-07-13 Andrew Burgess <andrew.burgess@embecosm.com>
501 * tui/tui-win.c (window_name_completer): New function.
502 (focus_completer): Call window_name_completer. All old content
503 moved into window_name_completer.
504 (winheight_completer): New function.
505 (_initialize_tui_win): Rename variable. Add completer to
506 winheight command. Update doc string on winheight.
508 2015-07-12 Sandra Loosemore <sandra@codesourcery.com>
510 * nios2-linux-tdep.c (_initialize_nios2_linux_tdep): Register
511 all nios2 mach variants.
513 2015-07-10 Kevin Buettner <kevinb@redhat.com>
515 * rx-tdep.c (rx_get_opcode_byte): Use target_read_code instead
516 of target_read_memory.
518 2015-07-10 Andrew Burgess <andrew.burgess@embecosm.com>
520 * tui/tui-win.c (tui_set_win_height): Use a cleanup to free the
522 (parse_scrolling_args): Likewise.
524 2015-07-10 Andrew Burgess <andrew.burgess@embecosm.com>
526 * tui/tui-win.c (focus_completer): Don't duplicate the tui window
527 names in this function.
529 2015-07-10 Andrew Burgess <andrew.burgess@embecosm.com>
531 * tui/tui-data.h (SRC_NAME): Convert to lower case.
532 (CMD_NAME): Likewise.
533 (DATA_NAME): Likewise.
534 (DISASSEM_NAME): Likewise.
535 * tui/tui-win.c (tui_set_focus): Window names are now lower case.
536 (tui_set_win_height): Likewise.
537 (parse_scrolling_args): Likewise.
539 2015-07-10 Markus Metzger <markus.t.metzger@intel.com>
541 * record-btrace.c (record_btrace_goto_begin)
542 (record_btrace_goto_end, record_btrace_goto): Move call to
543 print_stack_frame ...
544 (record_btrace_set_replay): ... here. Set stop_pc.
545 * record-full.c (record_full_goto_entry): Set stop_pc.
547 2015-07-09 Pierre Langlois <pierre.langlois@arm.com>
549 * NEWS: Mention support for tracepoints on aarch64-linux.
551 2015-07-09 Pierre Langlois <pierre.langlois@arm.com>
553 * linux-aarch64-low.c (aarch64_supports_tracepoints): New
555 (the_low_target): Install it.
557 2015-07-09 Pierre Langlois <pierre.langlois@arm.com>
559 * gdb.trace/backtrace.exp: Set registers for aarch64 target.
560 * gdb.trace/collection.exp: Likewise.
561 * gdb.trace/mi-trace-frame-collected.exp: Likewise.
562 * gdb.trace/mi-trace-unavailable.exp: Likewise.
563 * gdb.trace/report.exp: Likewise.
564 * gdb.trace/trace-break.exp: Likewise.
565 * gdb.trace/unavailable.exp: Likewise.
566 * gdb.trace/while-dyn.exp: Likewise.
568 2015-07-09 Pierre Langlois <pierre.langlois@arm.com>
570 * aarch64-tdep.c: Add ax.h and ax-gdb.h includes.
571 (aarch64_gen_return_address): New function.
572 (aarch64_gdbarch_init): Hook it.
574 2015-07-09 Pierre Langlois <pierre.langlois@arm.com>
576 * aarch64-tdep.c (aarch64_make_stub_cache): Set available_p and
577 swallow NOT_AVAILABLE_ERROR.
578 (aarch64_stub_this_id): Call frame_id_build_unavailable_stack if
579 available_p is not set.
580 (aarch64_stub_frame_unwind_stop_reason): New function.
581 (aarch64_stub_unwind): Install it.
583 2015-07-09 Pierre Langlois <pierre.langlois@arm.com>
585 * aarch64-tdep.c (aarch64_prologue_cache) <available_p>: New
587 (aarch64_make_prologue_cache_1): New function, factored out from
588 aarch64_make_prologue_cache. Do not allocate cache. Set
590 (aarch64_make_prologue_cache): Reimplement wrapping
591 aarch64_make_prologue_cache_1, and swallowing
593 (aarch64_prologue_frame_unwind_stop_reason): New function.
594 Return UNWIND_UNAVAILABLE if available_p is not set.
595 (aarch64_prologue_unwind): Install it.
596 (aarch64_prologue_this_id): Move prev_pc and prev_sp limit
597 checks into aarch64_prologue_frame_unwind_stop_reason. Call
598 frame_id_build_unavailable_stack if available_p is not set.
600 2015-07-09 Pierre Langlois <pierre.langlois@arm.com>
602 * aarch64-tdep.c (aarch64_prologue_cache) <func, prev_pc>: New
604 (aarch64_scan_prologue): Set prev_pc.
605 (aarch64_make_prologue_cache): Set func.
606 (aarch64_make_stub_cache): Set prev_pc.
607 (aarch64_prologue_this_id): Remove local variables id, pc and
608 func. Read prev_pc and func from cache.
609 (aarch64_stub_this_id): Read prev_pc from cache.
611 2015-07-09 Pierre Langlois <pierre.langlois@arm.com>
613 * aarch64-tdep.c (aarch64_make_stub_cache): Update comment. New
614 argument this_cache. Remove unused local variables reg and
615 unwound_fp. Return early if this_cache is already set. Set
617 (aarch64_stub_this_id): Update call to aarch64_make_stub_cache.
619 2015-07-09 Pierre Langlois <pierre.langlois@arm.com>
621 * aarch64-tdep.c (aarch64_make_prologue_cache): Update comment.
622 New argument this_cache. Return early if this_cache is already
624 (aarch64_prologue_this_id): Update call to
625 aarch64_make_prologue_cache.
626 (aarch64_prologue_prev_register): Likewise.
627 (aarch64_normal_frame_base): Likewise.
629 2015-07-09 Simon Marchi <simon.marchi@ericsson.com>
631 * c-valprint.c (c_val_print): Factor out memberptr printing code
632 from c_val_print to ...
633 (c_val_print_memberptr): ... this new function.
635 2015-07-09 Simon Marchi <simon.marchi@ericsson.com>
637 * c-valprint.c (c_val_print): Factor out int printing code to ...
638 (c_val_print_int): ... this new function.
640 2015-07-09 Simon Marchi <simon.marchi@ericsson.com>
642 * c-valprint.c (c_val_print): Factor out struct and union
644 (c_val_print_struct): ... this new function ...
645 (c_val_print_union): ... and this new function.
647 2015-07-09 Simon Marchi <simon.marchi@ericsson.com>
649 * c-valprint.c (c_val_print): Factor out pointer printing code
651 (c_val_print_ptr): ... this new function.
653 2015-07-09 Simon Marchi <simon.marchi@ericsson.com>
655 * c-valprint.c (c_valprint): Factor our array printing code from
657 (c_val_print_array): ... this new function.
659 2015-07-09 Simon Marchi <simon.marchi@ericsson.com>
661 * c-valprint.c (c_val_print): Factor out pointer printing code
663 (print_unpacked_pointer): ... this new function.
665 2015-07-09 Simon Marchi <simon.marchi@ericsson.com>
667 * c-valprint.c (c_val_print): Remove an assignment to i and move
670 2015-07-09 Yao Qi <yao.qi@linaro.org>
672 * aarch64-linux-nat.c (aarch64_linux_get_debug_reg_capacity): Add
673 argument ptid. Update comments. Caller update.
675 2015-07-09 Markus Metzger <markus.t.metzger@intel.com>
677 * btrace.c (pt_print_packet): Print stop, vmcs, tma, mtc, cyc, and
680 2015-07-09 Markus Metzger <markus.t.metzger@intel.com>
682 * btrace.c (btrace_pt_readmem_callback): Change type of PC argument.
684 2015-07-08 Simon Marchi <simon.marchi@ericsson.com>
686 * progspace.c (delete_program_space): Add missing spaces.
688 2015-07-08 Simon Marchi <simon.marchi@ericsson.com>
690 * inferior.c (delete_inferior_1): Rename to ...
691 (delete_inferior): ..., remove 'silent' parameter, delete
692 program space when unused and remove call to prune_program_spaces.
693 Remove the old, unused, delete_inferior.
694 (delete_inferior_silent): Remove.
695 (prune_inferiors): Change call from delete_inferior_1 to
696 delete_inferior and remove 'silent' parameter. Remove call to
697 prune_program_spaces.
698 (remove_inferior_command): Idem.
699 * inferior.h (delete_inferior_1): Rename to...
700 (delete_inferior): ..., remove 'silent' parameter and remove the
701 original delete_inferior.
702 (delete_inferior_silent): Remove.
703 * mi/mi-main.c (mi_cmd_remove_inferior): Change call from
704 delete_inferior_1 to delete_inferior and remove 'silent'
706 * progspace.c (prune_program_spaces): Remove.
707 (pspace_empty_p): Rename to...
708 (program_space_empty_p): ... and make non-static.
709 (delete_program_space): New.
710 * progspace.h (prune_program_spaces): Remove declaration.
711 (program_space_empty_p): New declaration.
712 (delete_program_space): New declaration.
713 * monitor.c (monitor_close): Replace call to
714 delete_thread_silent and delete_inferior_silent with
715 discard_all_inferiors.
717 2015-07-08 Patrick Palka <patrick@parcs.ath.cx>
719 * defs.h (deprecated_register_changed_hook): Remove prototype.
720 * interps.c (clear_iterpreter_hooks): Remove reference to
721 deprecated_register_changed_hook.
722 * top.c (deprecated_register_changed_hook): Remove prototype.
723 * valops.c (value_assign): Remove reference to
724 deprecated_register_changed_hook.
725 * tui/tui-hooks.c (tui_register_changed): Add parameter "frame".
726 Add comment documenting the function.
727 (tui_register_changed_observer): Define.
728 (tui_install_hooks): Remove reference to
729 deprecated_register_changed_hook. Set
730 tui_register_changed_observer.
731 (tui_remove_hooks): Remove reference to
732 deprecated_register_changed_hook. Unset
733 tui_register_changed_observer.
735 2015-07-08 Jan Kratochvil <jan.kratochvil@redhat.com>
738 * compile/compile-c-types.c (insert_type): Change gdb_assert to error.
740 2015-07-08 Robert O'Callahan <robert@ocallahan.org>
743 * ax-gdb.c (gen_conversion): Extend to 'to' bits, not 'from'.
745 2015-07-08 Markus Metzger <markus.t.metzger@intel.com>
747 * MAINTAINERS (Write After Approval): Add Markus T. Metzger.
749 2015-07-08 Markus Metzger <markus.t.metzger@intel.com>
751 * nat/linux-btrace.c (kernel_supports_bts, kernel_supports_pt):
752 Use safe_strerror() instead of strerror().
754 2015-07-07 Yao Qi <yao.qi@linaro.org>
756 * features/arm-with-m-fpa-layout.xml: Set architecture to arm.
757 * features/arm-with-m-fpa-layout.c: Regenerated.
758 * features/arm-with-m-vfp-d16.xml: Likewise.
759 * features/arm-with-m-vfp-d16.c: Regenerated.
760 * features/arm-with-m.xml: Likewise.
761 * features/arm-with-m.c: Regenerated.
762 * features/arm-with-neon.xml: Likewise.
763 * features/arm-with-neon.c: Regenerated.
764 * features/arm-with-vfpv2.xml: Likewise.
765 * features/arm-with-vfpv2.c: Regenerated.
766 * features/arm-with-vfpv3.xml: Likewise.
767 * features/arm-with-vfpv3.c: Regenerated.
769 2015-07-07 Yao Qi <yao.qi@linaro.org>
771 * aarch32-linux-nat.h (VFP_REGS_SIZE): New macro, moved from
773 * aarch64-linux-nat.c: Include aarch32-linux-nat.h and
775 (fetch_gregs_from_thread): Call aarch32_gp_regcache_supply
777 (store_gregs_to_thread): Call aarch32_gp_regcache_collect
779 (fetch_fpregs_from_thread): Call aarch32_vfp_regcache_supply
781 (store_fpregs_to_thread): Call aarch32_vfp_regcache_collect
783 (tdesc_arm_with_vfpv3, tdesc_arm_with_neon): Declare.
784 (aarch64_linux_read_description): Return the right target
786 * arm-linux-nat.c (VFP_REGS_SIZE): Moved to aarch32-linux-nat.h.
787 * config/aarch64/linux.mh (NATDEPFILES): Add aarch32-linux-nat.o.
788 * configure.tgt (aarch64*-*-linux*): Add arm-tdep.o and
791 2015-07-07 Yao Qi <yao.qi@linaro.org>
793 * aarch32-linux-nat.c: New file.
794 * aarch32-linux-nat.h: New file.
795 * arm-linux-nat.c: Include aarch32-linux-nat.h.
796 (fetch_regs): Move code to aarch32-linux-nat.c. Call
797 aarch32_gp_regcache_supply.
798 (store_regs): Move code to aarch32-linux-nat.c. Call
799 aarch32_gp_regcache_collect.
800 (fetch_vfp_regs): Move code to aarch32-linux-nat.c. Call
801 aarch32_vfp_regcache_supply.
802 (store_vfp_regs): Move code to aarch32-linux-nat.c. Call
803 aarch32_vfp_regcache_collect.
804 * config/arm/linux.mh (NATDEPFILES): Add aarch32-linux-nat.o.
806 2015-07-07 Yao Qi <yao.qi@linaro.org>
808 * arm-linux-nat.c (store_fpregister): Remove.
809 (store_register): Likewise.
810 (fetch_fpregister): Likewise.
811 (fetch_register): Likewise.
812 (arm_linux_store_inferior_registers): Call store_regs and
813 store_fpregs instead.
814 (arm_linux_fetch_inferior_registers): Call fetch_fpregs and
817 2015-07-06 Andrew Burgess <andrew.burgess@embecosm.com>
819 * doc/gdb.texinfo (TUI): Restructure documentation on TUI layout
822 2015-07-06 Joel Brobecker <brobecker@adacore.com>
824 * NEWS: Create a new section for the next release branch.
825 Rename the section of the current branch, now that it has
828 2015-07-06 Joel Brobecker <brobecker@adacore.com>
830 GDB 7.10 branch created (66c4b3e8a628a207bc6aafef6af0c4128195f56e):
831 * version.in: Bump version to 7.10.50.DATE-cvs.
833 2015-07-06 Luis Machado <lgustavo@codesourcery.com>
835 * breakpoint.c (remove_breakpoint_1): Don't handle permanent
836 breakpoints in a special way.
837 (remove_breakpoint): Likewise.
838 (mark_breakpoints_out): Likewise.
840 2015-07-06 Andrew Burgess <andrew.burgess@embecosm.com>
842 * doc/gdb.texinfo (TUI): Add comma after @xref.
844 2015-07-06 Andrew Burgess <andrew.burgess@embecosm.com>
846 * tui/tui-win.c (tui_set_focus): Use structure member 'generic'
847 instead of casting the structure type.
849 2015-07-06 Simon Marchi <simon.marchi@ericsson.com>
851 * valops.c (search_struct_field): Remove OFFSET parameter.
852 (value_cast_structs): Adjust calls to search_struct_field.
853 (value_struct_elt): Same.
854 (find_overload_match): Same.
856 2015-07-06 Simon Marchi <simon.marchi@ericsson.com>
858 * value.c (value_fetch_lazy): Update comment, change return
860 * value.h (value_fetch_lazy): Change return value to void.
862 2015-07-06 Andrew Burgess <andrew.burgess@embecosm.com>
864 * tui/tui-data.c (tui_partial_win_by_name): Window name is const.
865 (tui_win_name): Make parameter and result const.
866 * tui/tui-data.h (tui_win_name): Make parameter and result const.
868 2015-07-06 Patrick Palka <patrick@parcs.ath.cx>
870 * i386-tdep.c (i386_mpx_info_bounds): Don't call error, instead
871 use printf_unfiltered.
872 (set_mpx_cmd): Add missing trailing space to command string
874 (_initialize_i386_tdep): Give the "mpx" prefix command its
877 2015-07-02 Kevin Buettner <kevinb@redhat.com>
879 * rx-tdep.c (RX_USP_REGNUM, RX_BPC_REGNUM): New constants.
880 (enum rx_frame_type): New.
881 (struct rx_prologue): Add new field `frame_type'.
882 (rx_analyze_prologue): Add `frame_type' parameter. Cache this
883 parameter in the prologue struct. Add code for recording
884 locations of PC and PSW for fast interrupt and exception frames.
885 (rx_skip_prologue): Adjust call to rx_analyze_prologue.
886 (rx_analyze_frame_prologue): Add `frame_type' parameter.
887 (rx_frame_type): New function.
888 (rx_frame_base): Fetch frame type and pass it to rx_analyze_prologue.
889 (rx_frame_this_id): Rename parameter `this_prologue_cache' to
891 (rx_frame_prev_register): Rename parameter `this_prologue_cache' to
892 `this_cache'. Add cases for RX_FRAME_TYPE_EXCEPTION and
893 RX_FRAME_TYPE_FAST_INTERRUPT.
894 (normal_frame_p, exception_frame_p, rx_frame_sniffer_common)
895 (rx_frame_sniffer, rx_exception_sniffer): New functions.
896 (rx_frame_unwind): Use rx_frame_sniffer instead of
897 default_frame_sniffer.
898 (rx_frame_unwind): New unwinder.
899 (rx_gdbarch_init): Register new unwinder.
901 2015-07-02 Kevin Buettner <kevinb@redhat.com>
903 * rx-tdep.c (RX_BPSW_REGNUM, RX_FPSW_REGNUM): New constants.
904 (struct gdbarch_tdep): Add fields rx_psw_type and rx_fpsw_type.
905 (rx_register_type): Add cases for RX_PSW_REGNUM, RX_BPSW_REGNUM,
907 (rx_gdbarch_init): Initialize PSW, BPSW, and FPSW flags types.
909 2015-07-02 Jan Kratochvil <jan.kratochvil@redhat.com>
911 Fix GCC false warning.
912 * s390-linux-tdep.c (s390_handle_arg): Initialize VAL.
914 2015-07-02 Yao Qi <yao.qi@linaro.org>
916 * aarch64-linux-nat.c (aarch64_linux_insert_hw_breakpoint): Fix
917 typo in the debugging message.
919 2015-07-02 Markus Metzger <markus.t.metzger@intel.com>
921 * btrace.c: Include gdbcmd.h, cli/cli-utils.h, and ctype.h.
922 (maint_btrace_cmdlist, maint_btrace_set_cmdlist)
923 (maint_btrace_show_cmdlist, maint_btrace_pt_set_cmdlist)
924 (maint_btrace_pt_show_cmdlist, maint_btrace_pt_skip_pad)
925 (btrace_maint_clear): New.
926 (btrace_fetch, btrace_clear): Call btrace_maint_clear.
927 (pt_print_packet, btrace_maint_decode_pt)
928 (btrace_maint_update_pt_packets, btrace_maint_update_packets)
929 (btrace_maint_print_packets, get_uint, get_context_size, no_chunk)
930 (maint_btrace_packet_history_cmd)
931 (maint_btrace_clear_packet_history_cmd, maint_btrace_clear_cmd)
932 (maint_btrace_cmd, maint_btrace_set_cmd, maint_btrace_show_cmd)
933 (maint_btrace_pt_set_cmd, maint_btrace_pt_show_cmd)
934 (maint_info_btrace_cmd, _initialize_btrace): New.
935 * btrace.h (btrace_pt_packet, btrace_pt_packet_s)
936 (btrace_maint_packet_history, btrace_maint_info): New.
937 (btrace_thread_info) <maint>: New.
940 2015-07-02 Markus Metzger <markus.t.metzger@intel.com>
942 * btrace.c (btrace_fetch): Append the new trace data.
943 (btrace_clear): Clear the stored trace data.
944 * btrace.h (btrace_thread_info) <data>: New.
945 * common/btrace-common.h (btrace_data_clear)
946 (btrace_data_append): New.
947 * common/btrace-common.c (btrace_data_clear)
948 (btrace_data_append): New.
950 2015-07-02 Markus Metzger <markus.t.metzger@intel.com>
952 * nat/linux-btrace.c (linux_enable_bts): Check for
954 Check for data_offset and data_size fields. Use them.
956 2015-07-02 Markus Metzger <markus.t.metzger@intel.com>
958 * NEWS: Announce new commands "record btrace pt" and "record pt".
959 Announce new options "set|show record btrace pt buffer-size".
960 * btrace.c: Include "rsp-low.h".
961 Include "inttypes.h".
962 (btrace_add_pc): Add forward declaration.
963 (pt_reclassify_insn, ftrace_add_pt, btrace_pt_readmem_callback)
964 (pt_translate_cpu_vendor, btrace_finalize_ftrace_pt)
965 (btrace_compute_ftrace_pt): New.
966 (btrace_compute_ftrace): Support BTRACE_FORMAT_PT.
967 (check_xml_btrace_version): Update version check.
968 (parse_xml_raw, parse_xml_btrace_pt_config_cpu)
969 (parse_xml_btrace_pt_raw, parse_xml_btrace_pt)
970 (btrace_pt_config_cpu_attributes, btrace_pt_config_children)
971 (btrace_pt_children): New.
972 (btrace_children): Add support for "pt".
973 (parse_xml_btrace_conf_pt, btrace_conf_pt_attributes): New.
974 (btrace_conf_children): Add support for "pt".
975 * btrace.h: Include "intel-pt.h".
976 (btrace_pt_error): New.
977 * common/btrace-common.c (btrace_format_string, btrace_data_fini)
978 (btrace_data_empty): Support BTRACE_FORMAT_PT.
979 * common/btrace-common.h (btrace_format): Add BTRACE_FORMAT_PT.
980 (struct btrace_config_pt): New.
981 (struct btrace_config)<pt>: New.
982 (struct btrace_data_pt_config, struct btrace_data_pt): New.
983 (struct btrace_data)<pt>: New.
984 * features/btrace-conf.dtd (btrace-conf)<pt>: New.
986 * features/btrace.dtd (btrace)<pt>: New.
987 (pt, pt-config, cpu): New.
988 * nat/linux-btrace.c (perf_event_read, perf_event_read_all)
989 (perf_event_pt_event_type, kernel_supports_pt)
990 (linux_supports_pt): New.
991 (linux_supports_btrace): Support BTRACE_FORMAT_PT.
992 (linux_enable_bts): Free tinfo on error.
993 (linux_enable_pt): New.
994 (linux_enable_btrace): Support BTRACE_FORMAT_PT.
995 (linux_disable_pt): New.
996 (linux_disable_btrace): Support BTRACE_FORMAT_PT.
997 (linux_fill_btrace_pt_config, linux_read_pt): New.
998 (linux_read_btrace): Support BTRACE_FORMAT_PT.
999 * nat/linux-btrace.h (struct btrace_tinfo_pt): New.
1000 (struct btrace_target_info)<pt>: New.
1001 * record-btrace.c (set_record_btrace_pt_cmdlist)
1002 (show_record_btrace_pt_cmdlist): New.
1003 (record_btrace_print_pt_conf): New.
1004 (record_btrace_print_conf): Support BTRACE_FORMAT_PT.
1005 (btrace_ui_out_decode_error): Support BTRACE_FORMAT_PT.
1006 (cmd_record_btrace_pt_start): New.
1007 (cmd_record_btrace_start): Support BTRACE_FORMAT_PT.
1008 (cmd_set_record_btrace_pt, cmd_show_record_btrace_pt): New.
1009 (_initialize_record_btrace): Add new commands.
1010 * remote.c (PACKET_Qbtrace_pt, PACKET_Qbtrace_conf_pt_size): New.
1011 (remote_protocol_features): Add "Qbtrace:pt".
1012 Add "Qbtrace-conf:pt:size".
1013 (remote_supports_btrace): Support BTRACE_FORMAT_PT.
1014 (btrace_sync_conf): Support PACKET_Qbtrace_conf_pt_size.
1015 (remote_enable_btrace): Support BTRACE_FORMAT_PT.
1016 (_initialize_remote): Add new commands.
1018 2015-07-02 Markus Metzger <markus.t.metzger@intel.com>
1020 * configure.ac: check for libipt
1021 * configure: Regenerate.
1022 * config.in: Regenerate.
1023 * Makefile.in (LIBIPT): New.
1024 (CLIBS): Add $LIBIPT.
1025 * NEWS: document new configure options
1027 2015-07-02 Jan Kratochvil <jan.kratochvil@redhat.com>
1029 * compile/compile-object-load.c (compile_object_load): Replace debug
1030 message "lookup undefined ELF symbol" by 3 more specific messages.
1032 2015-07-01 Kevin Buettner <kevinb@redhat.com>
1034 * rl78-tdep.c (struct gdbarch_tdep): Add new field, rl78_psw_type.
1035 (rl78_register_type): Add case for RL78_PSW_REGNUM.
1036 (rl78_gdbarch_init): Initialize rl78_psw_type.
1038 2015-07-01 Patrick Palka <patrick@parcs.ath.cx>
1040 * tui/tui-hooks.c (tui_refresh_frame_and_register_information):
1041 Update commentary. Always refresh the registers when frame
1042 information has changed.
1043 * tui/tui-stack.c (tui_show_frame_info): Update commentary.
1044 Change return type to int. Return 1 if frame information has
1045 changed, 0 otherwise.
1046 (tui_before_prompt): Update commentary.
1047 * tui/tui-stack.h (tui_show_frame_info): Change return type to
1050 2015-06-30 Patrick Palka <patrick@parcs.ath.cx>
1053 * frame.c (select_frame): Remove reference to
1054 deprecated_selected_frame_level_changed_hook.
1055 * frame.h (deprecated_selected_frame_level_changed_hook): Remove
1057 * stack.c (deprecated_selected_frame_level_changed_hook):
1059 * tui/tui-hooks.c (tui_selected_frame_level_changed_hook):
1061 (tui_refresh_frame_and_register_information): ... this. Bail
1062 out if there is no stack. Don't update register information
1063 unless registers_too_p is true.
1064 (tui_print_frame_info_listing_hook): Rename to ...
1065 (tui_dummy_print_frame_info_listing_hook): ... this.
1066 (tui_before_prompt): New function.
1067 (tui_normal_stop): New function.
1068 (tui_before_prompt_observer): New observer.
1069 (tui_normal_stop_observer): New observer.
1070 (tui_install_hooks): Set
1071 deprecated_print_frame_info_listing_hook to
1072 tui_dummy_print_frame_info_listing_hook. Register
1073 tui_before_prompt_observer to call tui_before_prompt and
1074 tui_normal_stop_observer to call tui_normal_stop. Remove
1075 reference to deprecated_selected_frame_level_changed_hook.
1076 (tui_remove_hooks): Detach and unset tui_before_prompt_observer
1077 and tui_normal_stop_observer. Remove reference to
1078 deprecated_selected_frame_level_changed_hook.
1080 2015-06-30 Patrick Palka <patrick@parcs.ath.cx>
1083 * tui/tui-stack.c (tui_set_locator_info): Change prototype to
1084 return an int instead of void. Return whether the locator
1086 (tui_show_frame_info): If the locator info has not changed, then
1087 bail out early to avoid refreshing the windows.
1089 2015-06-30 Patrick Palka <patrick@parcs.ath.cx>
1091 * tui/tui-stack.c (tui_set_locator_info): Explicitly pass
1092 LOCATOR_WIN to tui_alloc_content.
1094 2015-06-30 Yao Qi <yao.qi@linaro.org>
1097 * arm-tdep.c (arm_get_next_pc_raw): Break for media
1100 2015-06-29 Kevin Buettner <kevinb@redhat.com>
1102 * rx-tdep.c (RX_PSW_REGNUM): New enum constant.
1103 (rx_dwarf_reg_to_regnum): New function.
1104 (rx_gdbarch_init): Register rx_dwarf_reg_to_regnum. Use dwarf2
1107 2015-06-29 Pedro Alves <palves@redhat.com>
1110 * infcall.c (run_inferior_call): On infcall success, if the thread
1111 was marked stopped before, reset it back to stopped.
1112 * infrun.c (resume): Don't suppress the set_running calls when
1114 (normal_stop): Only discard the finish_thread_state cleanup if the
1117 2015-06-29 Pierre Langlois <pierre.langlois@arm.com>
1119 * MAINTAINERS (Write After Approval): Update my email address.
1121 2015-06-26 Keith Seitz <keiths@redhat.com>
1122 Doug Evans <dje@google.com>
1125 * block.c (block_lookup_symbol): For non-function blocks,
1126 continue to search for a symbol with an exact domain match
1127 Otherwise, return any previously found "best domain" symbol.
1128 (block_lookup_symbol_primary): Likewise.
1130 2015-06-26 Patrick Palka <patrick@parcs.ath.cx>
1132 * NEWS: Mention the new option "history remove-duplicates".
1133 * top.c (history_remove_duplicates): New static variable.
1134 (show_history_remove_duplicates): New static function.
1135 (gdb_add_history): Conditionally remove duplicate history
1137 (init_main): Add "history remove-duplicates" option.
1139 2015-06-26 Patrick Palka <patrick@parcs.ath.cx>
1141 * tui/tui-win.c (focus_completer): New static function.
1142 (_initialize_tui_win): Set the completion function of the
1143 "focus" command to focus_completer.
1145 2015-06-26 Jan Kratochvil <jan.kratochvil@redhat.com>
1147 * linespec.c (minsym_found): Reset sal.PC for COMPUNIT_LOCATIONS_VALID
1149 * symtab.c (find_function_start_sal): Likewise.
1151 2015-06-25 Gary Benson <gbenson@redhat.com>
1153 * solib.c (solib_find_1): Set local variable sysroot to NULL if
1154 it is the empty string after trailing slashes have been stripped.
1156 2015-06-25 Gary Benson <gbenson@redhat.com>
1158 * exec.c (exec_file_locate_attach): Remove gdb_sysroot NULL check.
1159 * infrun.c (follow_exec): Likewise.
1160 * remote.c (remote_filesystem_is_local): Likewise.
1161 * solib.c (solib_find_1): Likewise.
1163 2015-06-24 Keith Seitz <keiths@redhat.com>
1165 * build-id.c (build_id_to_debug_bfd): Add cleanup to free
1166 return value from lrealpath.
1168 2015-06-24 Mike Frysinger <vapier@gentoo.org>
1170 * remote-sim.c (gdbsim_open): Move sysroot update to the top.
1172 2015-06-24 Mike Frysinger <vapier@gentoo.org>
1174 * remote-sim.c: Include gdb_bfd.h.
1175 (gdbsim_open): Declare new local sysroot pointing to gdb_sysroot.
1176 Skip TARGET_SYSROOT_PREFIX in gdb_sysroot when it is active.
1178 2015-06-24 Yao Qi <yao.qi@linaro.org>
1180 * aarch64-linux-tdep.c (aarch64_linux_init_abi): Don't call
1181 set_gdbarch_get_siginfo_type.
1182 * amd64-linux-tdep.c (amd64_linux_init_abi_common): Likewise.
1183 * arm-linux-tdep.c (arm_linux_init_abi): Likewise.
1184 * i386-linux-tdep.c (i386_linux_init_abi): Likewise.
1185 * m68klinux-tdep.c (m68k_linux_init_abi): Likewise.
1186 * ppc-linux-tdep.c (ppc_linux_init_abi): Likewise.
1187 * s390-linux-tdep.c (s390_gdbarch_init): Likewise.
1188 * tilegx-linux-tdep.c (tilegx_linux_init_abi): Likewise.
1189 * linux-tdep.c (linux_get_siginfo_type): Change it to static.
1190 (linux_init_abi): Call set_gdbarch_get_siginfo_type.
1191 * linux-tdep.h (linux_get_siginfo_type): Remove the declaration.
1193 2015-06-24 Gary Benson <gbenson@redhat.com>
1195 * common/buffer.c (stdint.h): Do not include.
1196 * common/print-utils.c (stdint.h): Likewise.
1197 * compile/compile-c-symbols.c (gdb_assert.h): Likewise.
1198 * compile/compile-c-types.c (gdb_assert.h): Likewise.
1199 * ft32-tdep.c (gdb_assert.h): Likewise.
1200 * guile/scm-utils.c (stdint.h): Likewise.
1201 * i386-linux-tdep.c (stdint.h): Likewise.
1202 * i386-tdep.c (stdint.h): Likewise.
1203 * nat/linux-btrace.c (stdint.h): Likewise.
1204 * nat/linux-btrace.h (stdint.h): Likewise.
1205 * nat/linux-ptrace.c (stdint.h): Likewise.
1206 * nat/mips-linux-watch.h (stdint.h): Likewise.
1207 * ppc-linux-nat.c (stdint.h): Likewise.
1208 * python/python-internal.h (stdint.h): Likewise.
1209 * stub-termcap.c (stdlib.h): Likewise.
1210 * target/target.h (stdint.h): Likewise.
1211 * xtensa-linux-nat.c (stdint.h): Likewise.
1213 2015-06-23 Patrick Palka <patrick@parcs.ath.cx>
1215 * top.c (init_history): Look at errno after calling strtol to
1216 properly map large GDBHISTSIZE values to infinity.
1218 2015-06-23 Doug Evans <dje@google.com>
1220 * inferior.h (struct inferior_suspend_state): Delete, unused.
1221 All references deleted.
1223 2015-06-23 Mike Frysinger <vapier@gentoo.org>
1225 * microblaze-tdep.c (microblaze_push_dummy_code): Delete.
1226 (microblaze_push_dummy_call): Likewise.
1227 (microblaze_gdbarch_init): Delete calls to set_gdbarch_push_dummy_code
1228 and set_gdbarch_push_dummy_call.
1230 2015-06-23 Yao Qi <yao.qi@linaro.org>
1232 * amd64-linux-nat.c (amd64_linux_fetch_inferior_registers):
1233 Check whether have_ptrace_getregset is TRIBOOL_TRUE explicitly.
1234 (amd64_linux_store_inferior_registers): Likewise.
1235 * arm-linux-nat.c (fetch_fpregister): Likewise.
1236 (fetch_fpregs, store_fpregister): Likewise.
1237 (store_fpregister, store_fpregs): Likewise.
1238 (fetch_register, fetch_regs): Likewise.
1239 (store_register, store_regs): Likewise.
1240 (fetch_vfp_regs, store_vfp_regs): Likewise.
1241 (arm_linux_read_description): Check have_ptrace_getregset is
1242 TRIBOOL_UNKNOWN. Set have_ptrace_getregset to TRIBOOL_TRUE
1244 * i386-linux-nat.c (fetch_xstateregs): Check
1245 have_ptrace_getregset is not TRIBOOL_TRUE.
1246 (store_xstateregs): Likewise.
1247 * linux-nat.c (have_ptrace_getregset): Change its type to
1249 * linux-nat.h (tribool): New enum.
1250 * x86-linux-nat.c (x86_linux_read_description): Use enum tribool.
1251 Check whether have_ptrace_getregset is TRIBOOL_TRUE.
1253 2015-06-19 Doug Evans <dje@google.com>
1255 * NEWS: Mention Sun's version of stabs is no longer supported.
1256 * elfread.c (free_elfinfo): Delete. All uses updated.
1257 (elfstab_offset_sections): Delete. All uses updated.
1258 * gdb-stabs.h (stab_section_info): Delete. All uses updated.
1259 * psympriv.h (partial_symtab) <section_offsets>: Delete.
1261 * psymtab.c (start_psymtab_common): Delete arg section_offsets.
1262 All callers updated.
1264 2015-06-18 Simon Marchi <simon.marchi@ericsson.com>
1266 * common/rsp-low.c (needs_escaping): New.
1267 (remote_escape_output): Add unit_size parameter. Refactor to
1268 support multi-byte addressable units. Rename parameters.
1269 * common/rsp-low.h (remote_escape_output): Add unit_size
1270 parameter and rename others. Update doc.
1271 * remote.c (align_for_efficient_write): New.
1272 (remote_write_bytes_aux): Add unit_size parameter and use it.
1273 Rename some variables. Update doc.
1274 (remote_xfer_partial): Get unit size and use it.
1275 (remote_read_bytes_1): Add unit_size parameter and use it.
1276 Rename some variables. Update doc.
1277 (remote_write_bytes): Same.
1278 (remote_xfer_live_readonly_partial): Same.
1279 (remote_read_bytes): Same.
1280 (remote_flash_write): Update call to remote_write_bytes_aux.
1281 (remote_write_qxfer): Update call to remote_escape_output.
1282 (remote_search_memory): Same.
1283 (remote_hostio_pwrite): Same.
1285 2015-06-17 Luis Machado <lgustavo@codesourcery.com>
1287 * breakpoint.c (add_location_to_breakpoint): Don't mark permanent
1288 locations as inserted.
1289 Update and expand comment about permanent locations.
1290 (bp_loc_is_permanent): Don't return 0 for bp_call_dummy.
1291 Move comment to add_location_to_breakpoint.
1292 (update_global_location_list): Don't error out if a permanent
1293 breakpoint is not marked inserted.
1294 Don't error out if a non-permanent breakpoint location is inserted on
1295 top of a permanent breakpoint.
1297 2015-06-17 Luis Machado <lgustavo@codesourcery.com>
1299 * breakpoint.c (make_breakpoint_permanent): Remove unused
1301 * breakpoint.h (make_breakpoint_permanent): Remove declaration.
1303 2015-06-17 Patrick Palka <patrick@parcs.ath.cx>
1306 * NEWS: Mention new GDBHISTSIZE behavior.
1307 * top.c (init_history): For null or out-of-range GDBHISTSIZE,
1308 set history size to unlimited. Ignore non-numeric GDBHISTSIZE.
1310 2015-06-17 Patrick Palka <patrick@parcs.ath.cx>
1312 * NEWS: Mention that GDBHISTSIZE is read instead of HISTSIZE.
1313 * top.c (init_history): Read from GDBHISTSIZE instead of
1315 (init_main): Refer to GDBHISTSIZE instead of HISTSIZE.
1317 2015-06-17 Patrick Palka <patrick@parcs.ath.cx>
1319 * top.c (gdb_safe_append_history): Do not call
1320 history_truncate_file if the history is not stifled.
1322 2015-06-17 Andreas Arnez <arnez@linux.vnet.ibm.com>
1324 * syscalls/s390-linux.xml: Add syscalls 344 through 354.
1325 * syscalls/s390x-linux.xml: Likewise.
1327 2015-06-16 Michael Eager <eager@eagercon.com>
1329 * nat/linux-namespaces.c (MSG_CMSG_CLOEXEC): Define if not defined.
1331 2015-06-16 Patrick Palka <patrick@parcs.ath.cx>
1333 * tui/tui-hooks.c (tui_selected_frame_level_changed_hook): Call
1334 target_terminal_ours_for_output() before calling
1335 tui_show_frame_info(), and restore the original terminal
1336 settings afterwards.
1338 2015-06-16 Martin Simmons <martin@lispworks.com> (tiny patch)
1340 * arm-linux-nat.c: Include nat/linux-ptrace.h.
1342 2015-06-15 Simon Marchi <simon.marchi@ericsson.com>
1344 * mi/mi-main.c (mi_cmd_data_read_memory_bytes): Consider addressable
1346 (mi_cmd_data_write_memory_bytes): Same.
1348 2015-06-15 Simon Marchi <simon.marchi@ericsson.com>
1350 * corefile.c (write_memory): Update doc.
1351 * gdbcore.h (write_memory): Same.
1353 2015-06-15 Jan Kratochvil <jan.kratochvil@redhat.com>
1355 * linux-tdep.c (enum filterflags): Make it from anonymous enum.
1356 (dump_mapping_p): Use it for parameter filterflags.
1357 (linux_find_memory_regions_full): Use it for variable filterflags.
1359 2015-06-15 Aleksandar Ristovski <aristovski@qnx.com
1360 Jan Kratochvil <jan.kratochvil@redhat.com>
1362 Merge multiple hex conversions.
1363 * monitor.c: Include rsp-low.h.
1364 (fromhex): Remove definition.
1366 2015-06-15 Aleksandar Ristovski <aristovski@qnx.com
1367 Jan Kratochvil <jan.kratochvil@redhat.com>
1369 Move utility functions to common/.
1370 * cli/cli-utils.c (skip_spaces, skip_spaces_const, skip_to_space_const):
1371 Move defs to common/common-utils.c.
1372 * cli/cli-utils.h (skip_spaces, skip_spaces_const, skip_to_space)
1373 (skip_to_space_const): Move decls to common/common-utils.h.
1374 * common/common-defs.h: Move include of common-types.h before
1376 * common/common-utils.c: Include host-defs.h and ctype.h.
1377 (HIGH_BYTE_POSN, is_digit_in_base, digit_to_int, strtoulst): Move
1379 (skip_spaces, skip_spaces_const, skip_to_space_const): Move from
1381 * common/common-utils.h (strtoulst): Move decl from utils.h.
1382 (skip_spaces, skip_spaces_const, skip_to_space, skip_to_space_const):
1383 Move from cli/cli-utils.h.
1384 * common/host-defs.h: Include limits.h.
1385 (TARGET_CHAR_BIT, HOST_CHAR_BIT): Moved from defs.h.
1386 (skip_spaces, skip_spaces_const): Move decls from cli/cli-utils.h.
1387 * defs.h (TARGET_CHAR_BIT, HOST_CHAR_BIT): Move to
1388 common/common-utils.h.
1389 * utils.c (HIGH_BYTE_POSN, is_digit_in_base, digit_to_int)
1390 (strtoulst): Move to common/common-utils.c.
1391 * utils.h (strtoulst): Moved decl to common/common-utils.h.
1393 2015-06-15 Yao Qi <yao.qi@linaro.org>
1395 * data-directory/Makefile.in (SYSCALLS_FILES): Add aarch64-linux.xml.
1397 2015-06-10 Jon Turney <jon.turney@dronecode.org.uk>
1399 * build-id.c: Don't include elf-bfd.h.
1400 (build_id_bfd_get): Use bfd_build_id.
1401 (build_id_verify): Ditto.
1402 * build-id.h: Ditto.
1403 (find_separate_debug_file_by_buildid): Ditto.
1404 * python/py-objfile.c: Don't include elf-bfd.h.
1405 (objfpy_get_build_id) Use bfd_build_id.
1406 (objfpy_build_id_matches, objfpy_lookup_objfile_by_build_id): Ditto.
1407 * coffread.c: Include build-id.h.
1408 (coff_symfile_read): Try find_separate_debug_file_by_buildid.
1410 2015-06-03 Jon Turney <jon.turney@dronecode.org.uk>
1412 * windows-nat.c (do_windows_fetch_inferior_registers)
1413 (handle_output_debug_string): Replace __COPY_CONTEXT_SIZE
1414 conditional with __CYGWIN__.
1416 2015-06-13 Andrew Burgess <andrew.burgess@embecosm.com>
1418 * completer.c: Add arch-utils.h include.
1419 (enum reg_completer_targets): New enum.
1420 (reg_or_group_completer_1): New function containing old
1421 reg_or_group_completer, add and use new parameter to control what
1422 is completed on. Use get_current_arch rather than architecture of
1423 currently selected frame.
1424 (reg_or_group_completer): Call new reg_or_group_completer_1.
1425 (reggroup_completer): Call new reg_or_group_completer_1.
1426 * completer.h (reggroup_completer): Add declaration.
1427 * tui/tui-regs.c: Add 'completer.h' include.
1428 (tui_reg_next_command): Renamed to...
1429 (tui_reg_next): ...this. Adjust parameters and return rather than
1431 (tui_reg_prev_command): Renamed to...
1432 (tui_reg_prev): ...this. Adjust parameters and return rather than
1434 (tui_reg_float_command): Delete.
1435 (tui_reg_general_command): Delete.
1436 (tui_reg_system_command): Delete.
1437 (tui_reg_command): Rewrite to perform switching of register group.
1439 (tuireglist): Remove.
1440 (tui_reggroup_completer): New function.
1441 (_initialize_tui_regs): Remove 'tui reg' sub-commands, update
1442 creation of 'tui reg' command.
1443 * NEWS: Add comment about 'tui reg' changes.
1445 2015-06-12 Simon Marchi <simon.marchi@ericsson.com>
1447 * target.c (target_read): Consider addressable unit size when
1448 reading from a memory object.
1449 (read_memory_robust): Same.
1450 (read_whatever_is_readable): Same.
1451 (target_write_with_progress): Consider addressable unit size
1452 when writing to a memory object.
1453 * target.h (target_read): Update documentation.
1454 (target_write): Add documentation.
1456 2015-06-12 Simon Marchi <simon.marchi@ericsson.com>
1458 * arch-utils.h (default_addressable_memory_unit_size): New.
1459 * arch-utils.c (default_addressable_memory_unit_size): New.
1460 * gdbarch.sh (addressable_memory_unit_size): New.
1461 * gdbarch.h: Re-generate.
1462 * gdbarch.c: Re-generate.
1464 2015-06-12 Simon Marchi <simon.marchi@ericsson.com>
1466 * target.c (target_read): Rename variables and use
1468 (target_read_with_progress): Same.
1469 (read_memory_robust): Constify parameters and rename
1471 (read_whatever_is_readable): Constify parameters,
1472 rename variables, adjust formatting.
1473 * target.h (read_memory_robust): Constify parameters.
1475 2015-06-12 Ulrich Weigand <uweigand@de.ibm.com>
1477 * ppc-sysv-tdep.c (ppc64_sysv_abi_return_value_base): Handle short
1478 synthetic (non-AltiVec) vector types.
1479 (ppc64_sysv_abi_return_value): Likewise.
1481 2015-06-12 Antoine Tremblay <antoine.tremblay@ericsson.com>
1483 PR breakpoints/16465
1484 * breakpoint.c (create_breakpoint): Save extra_string for
1485 pending breakpoints.
1487 2015-06-10 Walfred Tedeschi <walfred.tedeschi@intel.com>
1489 * i386-tdep.c (i386_mpx_get_bt_entry): Add a cast for mpx_bd_mask
1490 and bt_mask to CORE_ADDR.
1492 2015-06-11 Gary Benson <gbenson@redhat.com>
1494 * nat/linux-namespaces.c (mnsh_send_message): Use pulongest.
1495 (mnsh_recv_message): Likewise.
1497 2015-06-11 Walfred Tedeschi <walfred.tedeschi@intel.com>
1499 * i386-tdep.c (i386_mpx_print_bounds): use of LONGEST instead of
1500 long long int and plongest instead of %ll.
1502 2015-06-11 Gary Benson <gbenson@redhat.com>
1504 * nat/linux-namespaces.c (gdb_wait.h): New include.
1505 (sys/wait.h): Do not include.
1507 2015-06-10 Simon Marchi <simon.marchi@ericsson.com>
1509 * dwarf2read.c (dwarf_record_line): Call dwarf_record_line if
1510 end_sequence is true.
1512 2015-06-10 Jan Kratochvil <jan.kratochvil@redhat.com>
1515 * solib-target.c (library_list_start_list): Use explicit NULL
1518 2015-06-10 Jan Kratochvil <jan.kratochvil@redhat.com>
1520 * solib-target.c (library_list_start_list): Do not dereference
1521 variable version in its initialization. Make the VERSION check handle
1523 (library_list_attributes): Make "version" GDB_XML_AF_OPTIONAL.
1525 2015-06-10 Gary Benson <gbenson@redhat.com>
1527 * NEWS: Announce support for direct access of executable and
1528 shared library files when attaching to inferiors in containers
1529 on GNU/Linux systems.
1531 2015-06-10 Gary Benson <gbenson@redhat.com>
1533 * remote.c (struct remote_state) <fs_pid>: New field.
1534 (new_remote_state): Initialize the above.
1535 (PACKET_vFile_setfs): New enum value.
1536 (remote_hostio_set_filesystem): New function.
1537 (remote_hostio_open): Call the above.
1538 (remote_hostio_unlink): Likewise.
1539 (remote_hostio_readlink): Likewise.
1540 (_initialize_remote): Register new "set/show remote
1541 hostio-setfs-packet" command.
1542 * NEWS: Announce new vFile:setfs packet.
1544 2015-06-10 Gary Benson <gbenson@redhat.com>
1546 * linux-nat.c (nat/linux-namespaces.h): New include.
1547 (fileio.h): Likewise.
1548 (linux_nat_filesystem_is_local): New function.
1549 (linux_nat_fileio_pid_of): Likewise.
1550 (linux_nat_fileio_open): Likewise.
1551 (linux_nat_fileio_readlink): Likewise.
1552 (linux_nat_fileio_unlink): Likewise.
1553 (linux_nat_add_target): Initialize to_filesystem_is_local,
1554 to_fileio_open, to_fileio_readlink and to_fileio_unlink.
1555 (_initialize_linux_nat): New "set/show debug linux-namespaces"
1557 * NEWS: Mention new "set/show debug linux-namespaces" commands.
1559 2015-06-10 Gary Benson <gbenson@redhat.com>
1561 * target.h (struct inferior): New forward declaration.
1562 (struct target_ops) <to_filesystem_is_local>: Update comment.
1563 (struct target_ops) <to_fileio_open>: New argument inf.
1564 Update comment. All implementations updated.
1565 (struct target_ops) <to_fileio_unlink>: Likewise.
1566 (struct target_ops) <to_fileio_readlink>: Likewise.
1567 (target_filesystem_is_local): Update comment.
1568 (target_fileio_open): New argument inf. Update comment.
1569 (target_fileio_unlink): Likewise.
1570 (target_fileio_readlink): Likewise.
1571 (target_fileio_read_alloc): Likewise.
1572 (target_fileio_read_stralloc): Likewise.
1573 * target.c (target_fileio_open): New argument inf.
1574 Pass inf to implementation. Update debug printing.
1575 (target_fileio_unlink): Likewise.
1576 (target_fileio_readlink): Likewise.
1577 (target_fileio_read_alloc_1): New argument inf. Pass inf
1578 to target_fileio_open.
1579 (target_fileio_read_alloc): New argument inf. Pass inf to
1580 target_fileio_read_alloc_1.
1581 (target_fileio_read_stralloc): Likewise.
1582 * gdb_bfd.c (inferior.h): New include.
1583 (gdb_bfd_iovec_fileio_open): Replace unused "open_closure"
1584 argument with new argument "inferior". Pass inferior to
1586 (gdb_bfd_open): Supply inferior argument to
1587 gdb_bfd_iovec_fileio_open.
1588 * linux-tdep.c (linux_info_proc): Supply inf argument to
1589 relevant target_fileio calls.
1590 (linux_find_memory_regions_full): Likewise.
1591 (linux_fill_prpsinfo): Likewise.
1592 * remote.c (remote_filesystem_is_local): Supply inf
1593 argument to remote_hostio_open.
1594 (remote_file_put): Likewise.
1595 (remote_file_get): Likewise.
1596 (remote_file_delete): Supply inf argument to
1597 remote_hostio_unlink.
1599 2015-06-10 Gary Benson <gbenson@redhat.com>
1601 * inf-child.c (inf_child_fileio_open): Replace comment.
1602 (inf_child_fileio_pwrite): Likewise.
1603 (inf_child_fileio_pread): Likewise.
1604 (inf_child_fileio_fstat): Insert blank line before comment.
1605 (inf_child_fileio_close): Replace comment.
1606 (inf_child_fileio_unlink): Likewise.
1607 (inf_child_fileio_readlink): Likewise.
1608 * remote.c (remote_hostio_open): Likewise.
1609 (remote_hostio_pread): Likewise.
1610 (remote_hostio_pwrite): Likewise.
1611 (remote_hostio_close): Likewise.
1612 (remote_hostio_unlink): Likewise.
1613 (remote_hostio_readlink): Likewise.
1614 (remote_hostio_fstat): Likewise.
1615 (remote_filesystem_is_local): Likewise.
1616 * target.c (target_fileio_open): Likewise.
1617 (target_fileio_pwrite): Likewise.
1618 (target_fileio_pread): Likewise.
1619 (target_fileio_fstat): Insert blank line before comment.
1620 (target_fileio_close): Replace comment.
1621 (target_fileio_unlink): Likewise.
1622 (target_fileio_readlink): Likewise.
1623 (target_fileio_read_alloc): Likewise.
1624 (target_fileio_read_stralloc): Likewise.
1626 2015-06-10 Gary Benson <gbenson@redhat.com>
1628 * linux-thread-db.c (nat/linux-namespaces.h): New include.
1629 (check_pid_namespace_match): Use linux_ns_same rather than
1630 linux_proc_pid_get_ns to spot PID namespace mismatches.
1631 * nat/linux-procfs.h (linux_proc_pid_get_ns): Remove.
1632 * nat/linux-procfs.c (linux_proc_pid_get_ns): Likewise.
1634 2015-06-10 Gary Benson <gbenson@redhat.com>
1636 * configure.ac (AC_CHECK_FUNCS): Add setns.
1637 * config.in: Regenerate.
1638 * configure: Likewise.
1639 * nat/linux-namespaces.h: New file.
1640 * nat/linux-namespaces.c: Likewise.
1641 * Makefile.in (HFILES_NO_SRCDIR): Add nat/linux-namespaces.h.
1642 (linux-namespaces.o): New rule.
1643 * config/aarch64/linux.mh (NATDEPFILES): Add linux-namespaces.o.
1644 * config/alpha/alpha-linux.mh (NATDEPFILES): Likewise.
1645 * config/arm/linux.mh (NATDEPFILES): Likewise.
1646 * config/i386/linux.mh (NATDEPFILES): Likewise.
1647 * config/i386/linux64.mh (NATDEPFILES): Likewise.
1648 * config/ia64/linux.mh (NATDEPFILES): Likewise.
1649 * config/m32r/linux.mh (NATDEPFILES): Likewise.
1650 * config/m68k/linux.mh (NATDEPFILES): Likewise.
1651 * config/mips/linux.mh (NATDEPFILES): Likewise.
1652 * config/pa/linux.mh (NATDEPFILES): Likewise.
1653 * config/powerpc/linux.mh (NATDEPFILES): Likewise.
1654 * config/powerpc/ppc64-linux.mh (NATDEPFILES): Likewise.
1655 * config/powerpc/spu-linux.mh (NATDEPFILES): Likewise.
1656 * config/s390/linux.mh (NATDEPFILES): Likewise.
1657 * config/sparc/linux.mh (NATDEPFILES): Likewise.
1658 * config/sparc/linux64.mh (NATDEPFILES): Likewise.
1659 * config/tilegx/linux.mh (NATDEPFILES): Likewise.
1660 * config/xtensa/linux.mh (NATDEPFILES): Likewise.
1662 2015-06-10 Gary Benson <gbenson@redhat.com>
1664 * utils.h (make_cleanup_close): Moved to common/filestuff.h.
1665 * utils.c (do_close_cleanup): Moved to common/filestuff.c.
1666 (make_cleanup_close): Likewise.
1667 * common/filestuff.h (make_cleanup_close): Moved from utils.h.
1668 * common/filestuff.c (do_close_cleanup): Moved from utils.c.
1669 (make_cleanup_close): Likewise.
1671 2015-06-03 Jon Turney <jon.turney@dronecode.org.uk>
1673 * windows-nat.c (thread_rec): Also ignore ERROR_INVALID_HANDLE
1674 from SuspendThread().
1676 2015-06-03 Jon Turney <jon.turney@dronecode.org.uk>
1678 * windows-nat.c (handle_output_debug_string): Trim trailing '\n'
1679 from OutputDebugString.
1681 2015-06-10 Walfred Tedeschi <walfred.tedeschi@intel.com>
1682 Mircea Gherzan <mircea.gherzan@intel.com>
1684 * i386-tdep.c (MPX_BASE_MASK, MPX_BD_MASK, MPX_BT_MASK, MPX_BD_MASK_32,
1685 MPX_BT_MASK_32): New macros.
1686 (i386_mpx_set_bounds): New function that implements
1687 the command "set-mpx-bound".
1688 (i386_mpx_enabled): Helper function to test MPX availability.
1689 (i386_mpx_bd_base): Helper function to calculate the base directory
1691 (i386_mpx_get_bt_entry): Helper function to access a bound
1693 (i386_mpx_print_bounds): Effectively display bound information.
1694 (_initialize_i386_tdep): Add new commands to commands "set mpx" and
1696 (_initialize_i386_tdep):
1697 Add "bound" to the commands "show mpx" and "set mpx" commands.
1698 (mpx_set_cmdlist and mpx_show_cmdlist): List for the new prefixed "set mpx"
1699 and "show mpx" commands.
1700 * NEWS: List new commands for MPX support.
1702 2015-06-09 Gary Benson <gbenson@redhat.com>
1704 * common/fileio.h (fileio_to_host_mode): New declaration.
1705 * common/fileio.c (fileio_to_host_mode): New Function.
1706 * inf-child.c (inf_child_fileio_open): Process mode argument
1707 with fileio_to_host_mode.
1709 2015-06-09 Gary Benson <gbenson@redhat.com>
1711 * common/fileio.c (fileio_mode_pack): Fix preprocessor
1714 2015-06-05 Gary Benson <gbenson@redhat.com>
1716 * gdb_bfd.c (gdb_bfd_open): Move vgdb special case to...
1717 * remote.c (remote_filesystem_is_local): ...here.
1719 2015-06-04 Yao Qi <yao.qi@linaro.org>
1721 * gdbarch.c: Regenerate it.
1723 2015-06-03 Jan Kratochvil <jan.kratochvil@redhat.com>
1725 * arch-utils.c (default_infcall_munmap): New.
1726 * arch-utils.h (default_infcall_munmap): New declaration.
1727 * compile/compile-object-load.c (struct munmap_list, munmap_list_add)
1728 (munmap_list_free, munmap_listp_free_cleanup): New.
1729 (struct setup_sections_data): Add field munmap_list_headp.
1730 (setup_sections): Call munmap_list_add.
1731 (compile_object_load): New variable munmap_list_head, initialize
1732 setup_sections_data.munmap_list_headp, return munmap_list_head.
1733 * compile/compile-object-load.h (struct munmap_list): New declaration.
1734 (struct compile_module): Add field munmap_list_head.
1735 (munmap_list_free): New declaration.
1736 * compile/compile-object-run.c (struct do_module_cleanup): Add field
1738 (do_module_cleanup): Call munmap_list_free.
1739 (compile_object_run): Pass munmap_list_head to do_module_cleanup.
1740 * gdbarch.c: Regenerate.
1741 * gdbarch.h: Regenerate.
1742 * gdbarch.sh (infcall_munmap): New.
1743 * linux-tdep.c (linux_infcall_munmap): New.
1744 (linux_init_abi): Install it.
1746 2015-06-02 Simon Marchi <simon.marchi@ericsson.com>
1749 * inferior.c (detach_inferior): Call exit_inferior_1 with silent = 0.
1751 2015-06-02 Yao Qi <yao.qi@linaro.org>
1753 * i386-linux-nat.c: Include linux-nat.h.
1755 2015-06-01 Andreas Schwab <schwab@linux-m68k.org>
1756 Jan Kratochvil <jan.kratochvil@redhat.com>
1759 * dwarf2-frame-tailcall.c (pretended_chain_levels): Correct
1761 * dwarf2loc.c (chain_candidate): Likewise.
1763 2015-06-01 Yao Qi <yao.qi@linaro.org>
1765 * arm-linux-nat.c (fetch_vfp_regs): Use PTRACE_GETREGSET.
1766 (store_vfp_regs): Use PTRACE_SETREGSET.
1768 2015-06-01 Yao Qi <yao.qi@linaro.org>
1770 * arm-linux-nat.c (fetch_fpregister): Use PTRACE_GETREGSET.
1771 (fetch_fpregs): Likewise.
1772 * arm-linux-nat.c (store_fpregister): Use PTRACE_SETREGSET.
1773 (store_fpregs): Likewise.
1775 2015-06-01 Yao Qi <yao.qi@linaro.org>
1777 * arm-linux-nat.c (fetch_register): Use PTRACE_GETREGSET.
1778 (fetch_regs): Likewise.
1779 (store_regs): Use PTRACE_SETREGSET.
1780 (store_register): Likewise.
1782 2015-06-01 Yao Qi <yao.qi@linaro.org>
1784 * arm-linux-nat.c (arm_linux_read_description): Check whether
1785 kernel supports PTRACE_GETREGSET.
1787 2015-06-01 Yao Qi <yao.qi@linaro.org>
1789 * x86-linux-nat.c (have_ptrace_getregset): Move it to ...
1790 * linux-nat.c: ... here.
1791 * x86-linux-nat.h (have_ptrace_getregset): Move the declaration
1793 * linux-nat.h: ... here.
1795 2015-06-01 Yao Qi <yao.qi@linaro.org>
1797 * amd64-linux-nat.c: Include "nat/linux-ptrace.h".
1798 * i386-linux-nat.c: Likewise.
1799 * nat/linux-ptrace.h (PTRACE_GETREGSET, PTRACE_SETREGSET): Define.
1800 * s390-linux-nat.c: Include "nat/linux-ptrace.h".
1801 (PTRACE_GETREGSET, PTRACE_SETREGSET): Remove.
1802 * x86-linux-nat.c: Include "nat/linux-ptrace.h".
1803 * x86-linux-nat.h (PTRACE_GETREGSET, PTRACE_SETREGSET): Remove.
1805 2015-05-30 Eli Zaretskii <eliz@gnu.org>
1807 * go32-nat.c (go32_xfer_memory): Fix the return value to be
1808 compatible to what read_child and write_child return. This
1809 unbreaks that DJGPP build of GDB which was broken since v7.7.
1811 2015-05-29 Martin Galvan <martin.galvan@tallertechnologies.com>
1813 * MAINTAINERS (Write After Approval): Add Martin Galvan.
1815 2015-05-29 Roland McGrath <mcgrathr@google.com>
1818 * osabi.c (generic_elf_osabi_sniff_abi_tag_sections): Use warning
1819 rather than internal_error for an unrecognized value.
1821 2015-05-29 Max Filippov <jcmvbkbc@gmail.com>
1823 * xtensa-tdep.c (xtensa_pseudo_register_read)
1824 (xtensa_pseudo_register_write): Don't alias last pseudo register
1827 2015-05-28 Don Breazeal <donb@codesourcery.com>
1829 * infrun.c (follow_fork_inferior): Ensure the use of
1830 process-style ptids (pid,0,0) in verbose/debug "Detaching"
1833 2015-05-28 Doug Evans <dje@google.com>
1835 * dwarf2read.c (record_line_ftype): Remove, duplicate.
1837 2015-05-28 Yao Qi <yao.qi@linaro.org>
1839 * arm-linux-nat.c (arm_linux_has_wmmx_registers): Remove.
1840 (arm_linux_fetch_inferior_registers): Use
1841 tdep->have_wmmx_registers instead of arm_linux_has_wmmx_registers.
1842 (arm_linux_store_inferior_registers): Likewise.
1843 (arm_linux_read_description): Don't set
1844 arm_linux_has_wmmx_registers.
1845 * arm-tdep.c (arm_gdbarch_init): Set
1846 tdep->have_wmmx_registers according target descriptions.
1847 * arm-tdep.h (struct gdbarch_tdep) <have_wmmx_registers>: New
1850 2015-05-28 Yao Qi <yao.qi@linaro.org>
1852 * arm-linux-nat.c (arm_linux_vfp_register_count): Remove.
1853 (fetch_vfp_regs): Use vfp_register_count from gdbarch_tdep
1854 instead of arm_linux_vfp_register_count.
1855 (store_vfp_regs): Likewise.
1856 (arm_linux_fetch_inferior_registers): Likewise.
1857 (arm_linux_store_inferior_registers): Likewise.
1858 (arm_linux_read_description): Don't set
1859 arm_linux_vfp_register_count.
1860 * arm-linux-tdep.c (arm_linux_iterate_over_regset_sections):
1862 * arm-tdep.c (arm_gdbarch_init): Add assert on
1864 * arm-tdep.h (struct gdbarch_tdep) <have_vfp_registers>: Rename
1865 field to vfp_register_count. All users updated.
1867 2015-05-28 Kyle Huey <me@kylehuey.com> (tiny patch)
1869 * gdb/arm-tdep.c (arm_gdbarch_init): Perform arm_abi detection on
1870 ELFOSABI_GNU binaries.
1872 2015-05-27 Doug Evans <dje@google.com>
1874 * dwarf2read.c (lnp_state_machine): New typedef.
1875 (lnp_reader_state): New typedef.
1876 (dwarf_record_line_1): Renamed from dwarf_record_line.
1877 All callers updated.
1878 (dwarf_record_line): New function.
1879 (init_lnp_state_machine): New function.
1880 (check_line_address): Replace p_record_line parameter with state.
1881 All callers updated.
1882 (dwarf_decode_lines_1): Call dwarf_record_line, init_lnp_state_machine.
1883 Update to record state in lnp_state_machine.
1885 2015-05-27 Doug Evans <dje@google.com>
1887 * dwarf2read.c (record_line_ftype): New typedef.
1888 (check_line_address): New function.
1889 (dwarf_decode_lines_1): Call it.
1891 2015-05-27 Doug Evans <dje@google.com>
1893 * NEWS: Mention "set debug dwarf-line".
1894 * dwarf2read.c (dwarf_line_debug): New static global.
1895 (add_include_dir): Add debug dwarf-line support.
1896 (add_file_name, dwarf_record_line, dwarf_finish_line): Ditto.
1897 (_initialize_dwarf2_read): New parameter "debug dwarf-line".
1899 2015-05-27 Doug Evans <dje@google.com>
1901 * cp-namespace.c (cp_lookup_nested_symbol): New arg "domain".
1902 All callers updated.
1903 (cp_lookup_nested_symbol_1, find_symbol_in_baseclass): Ditto.
1904 * cp-support.h (cp_lookup_nested_symbol): Update.
1906 2015-05-27 Doug Evans <dje@google.com>
1909 * block.c (block_find_symbol): New function.
1910 (block_find_non_opaque_type): Ditto.
1911 (block_find_non_opaque_type_preferred): Ditto.
1912 * block.h (block_symbol_matcher_ftype): New typedef.
1913 (block_find_symbol): Declare.
1914 (block_find_non_opaque_type): Ditto.
1915 (block_find_non_opaque_type_preferred): Ditto.
1916 * dwarf2read.c (dw2_lookup_symbol): Call block_find_symbol.
1917 * psymtab.c (psym_lookup_symbol): Ditto.
1918 * symtab.c (basic_lookup_transparent_type_1): New function.
1919 (basic_lookup_transparent_type): Call it.
1921 2015-05-27 Yao Qi <yao.qi@linaro.org>
1923 * aarch64-tdep.c (aarch64_record_data_proc_simd_fp): Return
1924 AARCH64_RECORD_UNKNOWN for unknown instruction encoding.
1926 2015-05-27 Yao Qi <yao.qi@linaro.org>
1928 * aarch64-tdep.c (aarch64_record_branch_except_sys): Split lines
1930 (aarch64_record_load_store): Likewise.
1932 2015-05-26 Doug Evans <dje@google.com>
1934 PR c++/18141, c++/18417.
1935 * cp-support.c (cp_lookup_rtti_type): Handle the case of NAME being
1938 2015-05-26 Doug Evans <dje@google.com>
1940 * NEWS: Add entries for command renamings.
1941 * dwarf2read.c (dwarf_read_debug): Renamed from dwarf2_read_debug.
1943 (dwarf_die_debug): Renamed from dwarf2_die_debug. All uses updated.
1944 (dwarf_max_cache_age): Renamed from dwarf2_max_cache_age.
1946 (show_dwarf_max_cache_age): Renamed from show_dwarf2_max_cache_age.
1947 All callers updated. Fix spelling of DWARF in help text.
1948 (set_dwarf_cmdlist): Renamed from set_dwarf2_cmdlist.
1950 (show_dwarf_cmdlist): Renamed from show_dwarf2_cmdlist.
1952 (set_dwarf_cmd): Renamed from set_dwarf2_cmd. All callers updated.
1953 (show_dwarf_cmd): Renamed from show_dwarf2_cmd. All callers updated.
1954 (dwarf_always_disassemble): Renamed from dwarf_always_disassemble.
1956 (show_dwarf_always_disassemble): Renamed from
1957 show_dwarf2_always_disassemble. All callers updated.
1958 (_initialize_dwarf2_read): Rename "set/show dwarf2" prefix to
1959 "set/show dwarf". Rename "set/show dwarf2 max-cache-age" to
1960 "set/show dwarf max-cache-age". Rename
1961 "set/show dwarf2 always-disassemble" to
1962 "set/show dwarf always-disassemble". Rename
1963 "set/show debug dwarf2-read" to "set/show debug dwarf-read". Rename
1964 "set/show debug dwarf2-die" to "set/show debug dwarf-die".
1966 2015-05-26 Doug Evans <dje@google.com>
1969 * python/py-lazy-string.c (stpy_convert_to_value): Use
1970 gdbpy_gdb_memory_error not PyExc_MemoryError.
1971 (gdbpy_create_lazy_string_object): Ditto.
1973 2015-05-26 Andrew Burgess <andrew.burgess@embecosm.com>
1975 * tui/tui-regs.c (tui_reg_next_command): Compare against NULL.
1977 2015-05-26 Andrew Burgess <andrew.burgess@embecosm.com>
1979 * tui/tui-regs.c (tui_reg_prev_command): New function.
1980 (_initialize_tui_regs): Add 'prev' command for 'tui reg'.
1981 * reggroups.c (reggroup_prev): New function.
1982 * reggroups.h (reggroup_prev): Add declaration. Update comment.
1984 2015-05-26 Omair Javaid <omair.javaid@linaro.org>
1985 Yao Qi <yao.qi@linaro.org>
1987 * aarch64-linux-tdep.c: Include linux-record.h and
1989 (struct linux_record_tdep aarch64_linux_record_tdep): Declare.
1990 (aarch64_syscall): New enum.
1991 (aarch64_canonicalize_syscall): New function.
1992 (aarch64_all_but_pc_registers_record): New function.
1993 (aarch64_linux_syscall_record): New function.
1994 (aarch64_linux_init_abi): Install AArch64 process record
1995 handler. Update to handle syscall recording.
1996 * aarch64-tdep.c: Include record.h and record-full.h.
1997 (submask, bit, bits, REG_ALLOC, MEM_ALLOC): New macros.
1998 (struct aarch64_mem_r): Define.
1999 (aarch64_record_result): New enum.
2000 (struct insn_decode_record): Define.
2001 (insn_decode_record): New typedef.
2002 (aarch64_record_data_proc_reg): New function.
2003 (aarch64_record_data_proc_imm): New function.
2004 (aarch64_record_branch_except_sys): New function.
2005 (aarch64_record_load_store): New function.
2006 (aarch64_record_data_proc_simd_fp): New function.
2007 (aarch64_record_asimd_load_store): New function.
2008 (aarch64_record_decode_insn_handler): New function.
2009 (deallocate_reg_mem): New function.
2010 (aarch64_process_record): New function.
2011 * aarch64-tdep.h (struct gdbarch_tdep) <aarch64_syscall_record>:
2013 (aarch64_process_record): New extern declaration.
2014 * configure.tgt: Add linux-record.o to gdb_target_obs.
2015 * linux-record.h (struct linux_record_tdep) <arg7>: New field.
2017 2015-05-26 Omair Javaid <omair.javaid@linaro.org>
2019 * NEWS: Add a note on process record-replay support on aarch64*-linux*
2022 2015-05-26 Martin Galvan <martin.galvan@tallertechnologies.com>
2024 * amd64-tdep.c: Replace in_function_epilogue_p with
2025 stack_frame_destroyed_p throughout.
2026 * arch-utils.c: Ditto.
2027 * arch-utils.h: Ditto.
2028 * arm-tdep.c: Ditto.
2029 * breakpoint.c: Ditto.
2030 * gdbarch.sh: Ditto.
2031 * hppa-tdep.c: Ditto.
2032 * i386-tdep.c: Ditto.
2033 * mips-tdep.c: Ditto.
2034 * nios2-tdep.c: Ditto.
2035 * rs6000-tdep.c: Ditto.
2036 * s390-linux-tdep.c: Ditto.
2037 * score-tdep.c: Ditto.
2039 * sparc-tdep.c: Ditto.
2040 * sparc-tdep.h: Ditto.
2041 * sparc64-tdep.c: Ditto.
2042 * spu-tdep.c: Ditto.
2043 * tic6x-tdep.c: Ditto.
2044 * tilegx-tdep.c: Ditto.
2045 * xstormy16-tdep.c: Ditto.
2046 * gdbarch.c, gdbarch.h: Re-generated.
2048 2015-05-22 Andrew Burgess <andrew.burgess@embecosm.com>
2050 * NEWS: Mention 'tui enable' and 'tui disable'.
2051 * tui/tui.c (tui_enable_command): New function.
2052 (tui_disable_command): New function.
2053 (_initialize_tui): New function.
2055 2015-05-21 Andrew Burgess <andrew.burgess@embecosm.com>
2057 * tui/tui-regs.c (tui_reg_next_command): Use NULL not 0.
2059 2015-05-21 Andrew Burgess <andrew.burgess@embecosm.com>
2061 * tui/tui-layout.c (tui_set_layout_for_display_command): Ensure
2064 2015-05-21 Andrew Burgess <andrew.burgess@embecosm.com>
2066 * tui/tui-layout.c (tui_layout_command): Move call to tui_enable
2068 (tui_set_layout_for_display_command): ...here, before calling
2069 tui_set_layout. Only set the layout if gdb has not already
2070 entered the TUI_FAILURE state.
2072 2015-05-21 Andrew Burgess <andrew.burgess@embecosm.com>
2074 * tui/tui-layout.c (layout_completer): New function.
2075 (_initialize_tui_layout): Set completer on layout command.
2077 2015-05-21 Andrew Burgess <andrew.burgess@embecosm.com>
2079 * tui/tui-layout.c (tui_set_layout): Remove
2080 tui_register_display_type parameter. Remove all checking of this
2081 parameter, and reindent function. Update header comment.
2082 (tui_set_layout_for_display_command): Rename to...
2083 (tui_set_layout_by_name): ...this, and don't check for different
2084 register class types, don't pass a tui_register_display_type to
2085 tui_set_layout. Update header comment.
2086 (layout_names): Remove register set specific names.
2087 * tui/tui-layout.h (tui_set_layout): Remove
2088 tui_register_display_type parameter.
2089 * tui/tui.c (tui_rl_change_windows): Don't pass a
2090 tui_register_display_type to tui_set_layout.
2091 (tui_rl_delete_other_windows): Likewise.
2092 (tui_enable): Likewise.
2093 * tui/tui-data.h (TUI_FLOAT_REGS_NAME): Remove.
2094 (TUI_FLOAT_REGS_NAME_LOWER): Remove.
2095 (TUI_GENERAL_REGS_NAME): Remove.
2096 (TUI_GENERAL_REGS_NAME_LOWER): Remove.
2097 (TUI_SPECIAL_REGS_NAME): Remove.
2098 (TUI_SPECIAL_REGS_NAME_LOWER): Remove.
2099 (TUI_GENERAL_SPECIAL_REGS_NAME): Remove.
2100 (TUI_GENERAL_SPECIAL_REGS_NAME_LOWER): Remove.
2101 (enum tui_register_display_type): Remove.
2102 (struct tui_layout_def): Remove regs_display_type and
2103 float_regs_display_type fields.
2104 (struct tui_data_info): Remove regs_display_type field.
2105 (tui_layout_command): Use new name for
2106 tui_set_layout_for_display_command.
2107 * tui/tui-data.c (layout_def): Don't initialise removed fields.
2108 (tui_clear_win_detail): Don't initialise removed fields of
2110 * tui/tui-regs.c (tui_show_registers): Use new name for
2111 tui_set_layout_for_display_command.
2112 * tui/tui.h (tui_set_layout_for_display_command): Rename
2114 (tui_set_layout_by_name): ...this.
2115 * printcmd.c (display_command): Remove tui related layout call,
2118 2015-05-20 Joel Brobecker <brobecker@adacore.com>
2120 * infrun.c (handle_inferior_event_1): Renames handle_inferior_event.
2121 (handle_inferior_event): New function.
2123 2015-05-20 Joel Brobecker <brobecker@adacore.com>
2125 * ada-lang.c (to_fixed_array_type): Rename local variable
2126 typename into type_name.
2128 2015-05-19 Jan Kratochvil <jan.kratochvil@redhat.com>
2130 Fix ASAN crash for gdb.compile/compile.exp.
2131 * infcall.c (call_function_by_hand_dummy): Use xstrdup for NAME.
2133 2015-05-19 Jan Kratochvil <jan.kratochvil@redhat.com>
2135 * compile/compile-c-symbols.c (convert_symbol_sym, gcc_convert_symbol)
2136 (gcc_symbol_address): Change gdb_stdout to gdb_stdlog.
2137 * compile/compile-object-load.c (setup_sections, compile_object_load):
2139 * compile/compile.c (compile_to_object): Likewise.
2141 2015-05-16 Doug Evans <xdje42@gmail.com>
2143 * NEWS: Mention support for unbuffered Guile memory ports.
2144 * scm-ports.c (ioscm_memory_port): Update comments on end, size.
2145 (ioscm_lseek_address): Improve overflow calculation.
2146 (gdbscm_memory_port_fill_input): Add assert.
2147 (gdbscm_memory_port_write): Handle unbuffered ports.
2148 Handle large writes identical to Guile's fport_write.
2149 (gdbscm_memory_port_seek): Fix seeking past end check.
2150 (gdbscm_memory_port_close): Handle closing unbuffered port.
2151 (ioscm_parse_mode_bits): Recognize "0" for unbuffered ports.
2152 (ioscm_init_memory_port): Handle unbuffered ports.
2153 (ioscm_reinit_memory_port): Ditto.
2154 (ioscm_init_memory_port): Update size calculation.
2155 (gdbscm_open_memory): Support zero sized ports.
2157 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
2159 * compile/compile-object-load.c (get_out_value_type): Fix uninitialized
2160 variable compiler warnings.
2162 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
2164 * compile/compile-object-load.c (get_out_value_type): Fix returned type.
2166 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
2167 Phil Muldoon <pmuldoon@redhat.com>
2169 * NEWS (Changes since GDB 7.9): Add compile print.
2170 * compile/compile-c-support.c (add_code_header, add_code_footer)
2171 (c_compute_program): Add COMPILE_I_PRINT_ADDRESS_SCOPE and
2172 COMPILE_I_PRINT_VALUE_SCOPE.
2173 * compile/compile-internal.h (COMPILE_I_PRINT_OUT_ARG_TYPE)
2174 (COMPILE_I_PRINT_OUT_ARG, COMPILE_I_EXPR_VAL, COMPILE_I_EXPR_PTR_TYPE):
2176 * compile/compile-object-load.c: Include block.h.
2177 (get_out_value_type): New function.
2178 (compile_object_load): Handle COMPILE_I_PRINT_ADDRESS_SCOPE and
2179 COMPILE_I_PRINT_VALUE_SCOPE. Set compile_module's OUT_VALUE_ADDR and
2181 * compile/compile-object-load.h (struct compile_module): Add fields
2182 out_value_addr and out_value_type.
2183 * compile/compile-object-run.c: Include valprint.h and compile.h.
2184 (struct do_module_cleanup): Add fields out_value_addr and
2186 (do_module_cleanup): Handle COMPILE_I_PRINT_ADDRESS_SCOPE and
2187 COMPILE_I_PRINT_VALUE_SCOPE.
2188 (compile_object_run): Propagate out_value_addr and out_value_type.
2189 Pass OUT_VALUE_ADDR.
2190 * compile/compile.c: Include valprint.h.
2191 (compile_print_value, compile_print_command): New functions.
2192 (eval_compile_command): Handle failed COMPILE_I_PRINT_ADDRESS_SCOPE.
2193 (_initialize_compile): Update compile code help text. Install
2194 compile_print_command.
2195 * compile/compile.h (compile_print_value): New prototype.
2196 * defs.h (enum compile_i_scope_types): Add
2197 COMPILE_I_PRINT_ADDRESS_SCOPE and COMPILE_I_PRINT_VALUE_SCOPE.
2199 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
2201 * compile/compile-object-load.c (get_regs_type): Add parameter func_sym.
2202 Rely on its parameter count.
2203 (compile_object_load): Replace lookup_minimal_symbol_text by
2204 lookup_global_symbol_from_objfile. Verify FUNC_SYM. Set it in the
2206 * compile/compile-object-load.h (struct compile_module): Replace
2207 func_addr by func_sym.
2208 * compile/compile-object-run.c: Include block.h.
2209 (compile_object_run): Reset module variable after it is freed. Use
2210 FUNC_SYM instead of FUNC_ADDR. Rely on it.
2212 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
2214 * compile/compile-c-support.c (print_one_macro): Use #ifndef.
2215 (generate_register_struct): Use __gdb_uintptr for TYPE_CODE_PTR.
2216 (c_compute_program): Call generate_register_struct after typedefs.
2217 * compile/compile-loc2c.c (push, pushf_register_address)
2218 (pushf_register): Cast to GCC_UINTPTR.
2219 (do_compile_dwarf_expr_to_c): Use unused attribute. Add space after
2220 type. Use GCC_UINTPTR instead of void *. Remove excessive cast.
2221 (compile_dwarf_expr_to_c): Use GCC_UINTPTR instead of void *.
2222 * compile/compile.c (_initialize_compile): Enable warnings for
2225 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
2227 * cli/cli-script.c (execute_control_command): Update
2228 eval_compile_command caller.
2229 * compile/compile-object-load.c (compile_object_load): Add parameters
2230 scope and scope_data. Set them.
2231 * compile/compile-object-load.h (struct compile_module): Add fields
2232 scope and scope_data.
2233 (compile_object_load): Add parameters scope and scope_data.
2234 * compile/compile-object-run.c (struct do_module_cleanup): Add fields
2235 scope and scope_data.
2236 (compile_object_run): Propagate the fields scope and scope_data.
2237 * compile/compile.c (compile_file_command, compile_code_command):
2238 Update eval_compile_command callers.
2239 (eval_compile_command): Add parameter scope_data. Pass it plus scope.
2240 * compile/compile.h (eval_compile_command): Add parameter scope_data.
2241 * defs.h (struct command_line): Add field scope_data.
2243 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
2245 * printcmd.c (struct format_data): Move it to valprint.h.
2246 (print_command_parse_format, print_value): New functions from ...
2247 (print_command_1): ... here. Call them.
2248 * valprint.h (struct format_data): Move it here from printcmd.c.
2249 (print_command_parse_format, print_value): New declarations.
2251 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
2253 * compile/compile-object-load.c (compile_object_load): Add
2254 COMPILE_DEBUG message.
2256 2015-05-15 Jerome Guitton <guitton@adacore.com>
2258 * ada-lang.c (ada_value_ptr_subscript): Use enum position of
2259 index to get element instead of enum value.
2260 (ada_value_slice_from_ptr, ada_value_slice): Use enum position
2261 of index to compute length, but enum values to compute bounds.
2262 (ada_array_length): Use enum position of index instead of enum value.
2263 (pos_atr): Move position computation to...
2264 (ada_evaluate_subexp): Use enum values to compute bounds.
2265 * gdbtypes.c (discrete_position): ...this new function.
2266 * gdbtypes.h (discrete_position): New function declaration.
2267 * valprint.c (val_print_array_elements): Call discrete_position
2268 to handle array indexed by non-contiguous enumeration types.
2270 2015-05-15 Jerome Guitton <guitton@adacore.com>
2272 * ada-lang.c (find_parallel_type_by_descriptive_type):
2273 Go through typedefs during lookup.
2274 (to_fixed_array_type): Add support for non-bit packed arrays
2275 as variable-length fields.
2277 2015-05-15 Pedro Alves <palves@redhat.com>
2278 Simon Marchi <simon.marchi@ericsson.com>
2280 * event-loop.c (gdb_notifier) <next_file_handler,
2281 next_poll_fds_index>: New fields.
2282 (get_next_file_handler_to_handle_and_advance): New function.
2283 (delete_file_handler): If deleting the next file handler to
2284 handle, advance to the next file handler.
2285 (gdb_wait_for_event): Bail early if no event fired. Poll file
2286 handlers in round-robin fashion.
2288 2015-05-15 Pedro Alves <palves@redhat.com>
2290 * linux-tdep.c (linux_find_memory_regions_full): Rename local
2291 'private' to 'priv'.
2293 2015-05-15 Pedro Alves <palves@redhat.com>
2295 * nat/linux-nat.h: Include "target/waitstatus.h".
2297 2015-05-15 Yuanhui Zhang <asmwarrior@gmail.com>
2299 * python/py-unwind.c (struct reg_info): Move out of ...
2300 (struct cached_frame_info): ... this scope.
2301 (pending_frame_object_type, unwind_info_object_type): Make extern.
2303 2015-05-15 Joel Brobecker <brobecker@adacore.com>
2305 * ada-lang.c (ada_value_primitive_packed_val): Make sure
2306 accumSize is never negative.
2308 2015-05-14 Patrick Palka <patrick@parcs.ath.cx>
2310 * tui/tui-command.c: Remove include of <ctype.h>.
2311 (tui_dispatch_ctrl_char): Remove workaround for xterm terminals.
2313 2015-05-13 Martin Galvan <martin.galvan@tallertechnologies.com>
2315 * dwarf2read.c (die_needs_namespace): Return 1 for
2316 DW_TAG_inlined_subroutine.
2318 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
2320 * regcache.c (regcache_cpy_no_passthrough): New declaration.
2321 (regcache_cpy_no_passthrough): Make it static, add function comment.
2322 * regcache.h (regcache_dup, regcache_cpy): Reduce/update their comment.
2323 (regcache_cpy_no_passthrough): Remove declaration.
2325 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
2327 * gdbthread.h (struct thread_control_state): Update comment for
2329 * infcall.c (run_inferior_call): Update comment about
2331 * infcmd.c (get_return_value): Update comment about stop_registers.
2332 (finish_forward): Update comment about proceed_to_finish.
2333 * infrun.c (stop_registers): Remove.
2334 (clear_proceed_status, normal_stop): Remove stop_registers handling.
2335 * infrun.h (stop_registers): Remove.
2337 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
2339 * infcall.c (struct dummy_frame_context_saver)
2340 (dummy_frame_context_saver_data_free, dummy_frame_context_saver_dtor)
2341 (dummy_frame_context_saver_drop, dummy_frame_context_saver_cleanup)
2342 (dummy_frame_context_saver_get_regs, dummy_frame_context_saver_setup):
2344 (call_function_by_hand_dummy): Move discard_cleanups of
2345 inf_status_cleanup before dummy_frame_push. Call
2346 dummy_frame_context_saver_setup and prepare context_saver_cleanup.
2347 Use dummy_frame_context_saver_get_regs instead of stop_registers.
2348 * infcall.h (struct dummy_frame_context_saver)
2349 (dummy_frame_context_saver_drop, dummy_frame_context_saver_cleanup)
2350 (dummy_frame_context_saver_get_regs, dummy_frame_context_saver_setup):
2352 * infcmd.c: Include infcall.h.
2353 (get_return_value): Add parameter ctx_saver, use it instead of
2355 (print_return_value): Add parameter ctx_saver, pass it.
2356 (struct finish_command_continuation_args): Add field ctx_saver.
2357 (finish_command_continuation): Update print_return_value caller.
2358 (finish_command_continuation_free_arg): Free also ctx_saver.
2359 (finish_forward): Call dummy_frame_context_saver_setup.
2360 * inferior.h (struct dummy_frame_context_saver): New declaration.
2361 (get_return_value): Add parameter ctx_saver.
2362 * python/py-finishbreakpoint.c (bpfinishpy_pre_stop_hook): Update
2363 get_return_value caller.
2365 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
2367 * dummy-frame.c (struct dummy_frame_dtor_list): New.
2368 (struct dummy_frame): Replace dtor and dtor_data by dtor_list.
2369 (remove_dummy_frame): Process dtor_list.
2370 (pop_dummy_frame): Process dtor_list.
2371 (register_dummy_frame_dtor): Maintain dtor_list.
2372 (find_dummy_frame_dtor): Handle dtor_list.
2373 * dummy-frame.h (register_dummy_frame_dtor, find_dummy_frame_dtor):
2376 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
2378 * compile/compile-object-run.c (do_module_cleanup): Add parameter
2380 (compile_object_run): Update do_module_cleanup caller.
2381 * dummy-frame.c: Include infcall.h.
2382 (struct dummy_frame): Update dtor comment.
2383 (remove_dummy_frame): Call dtor.
2384 (pop_dummy_frame): Update dtor caller.
2385 * dummy-frame.h (dummy_frame_dtor_ftype): Add parameter
2388 2015-05-13 Joel Brobecker <brobecker@adacore.com>
2392 2015-05-13 Joel Brobecker <brobecker@adacore.com>
2394 * NEWS: Create "Changes in GDB 7.9.1" section. Move news about
2395 Xmethods now being able to specify a result type to that new
2398 2015-05-13 Patrick Palka <patrick@parcs.ath.cx>
2400 * tui/tui-win.c (tui_async_resize_screen): Clear win_resized
2401 first before resizing the window.
2402 * tui/tui.c (tui_enable): Likewise.
2404 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
2406 * dummy-frame.c (struct dummy_frame): Use proper typedef for dtor.
2407 * dummy-frame.h (dummy_frame_dtor_ftype): Add its comment.
2408 * infcall.c (call_function_by_hand_dummy): Use proper typedef for
2409 dummy_dtor parameter.
2410 * infcall.h: Include dummy-frame.h.
2411 (call_function_by_hand_dummy_dtor_ftype): Remove.
2412 (call_function_by_hand_dummy): Use proper typedef for dummy_dtor
2415 2015-05-13 Patrick Palka <patrick@parcs.ath.cx>
2418 * top.c (history_size_setshow_var): Change type to signed.
2419 Initialize to -2. Update documentation.
2420 (set_readline_history_size): Define.
2421 (set_history_size_command): Use it. Remove logic for handling
2423 (init_history): Use set_readline_history_size(). Test for a
2424 value of -2 instead of 0 when determining whether to set a
2425 default history size.
2426 (init_main): Decode the argument of the "size" command as a
2427 zuinteger_unlimited.
2429 2015-05-12 Doug Evans <dje@google.com>
2431 * dwarf2read.c (struct file_entry): Tweak comments.
2432 (get_debug_line_section): Tweak comments.
2434 2015-05-12 Don Breazeal <donb@codesourcery.com>
2436 * NEWS: Announce fork support in the RSP and support
2437 for fork debugging in extended mode.
2439 2015-05-12 Don Breazeal <donb@codesourcery.com>
2441 * remote.c (remote_insert_fork_catchpoint): New function.
2442 (remote_remove_fork_catchpoint): New function.
2443 (remote_insert_vfork_catchpoint): New function.
2444 (remote_remove_vfork_catchpoint): New function.
2445 (pending_fork_parent_callback): New function.
2446 (remove_new_fork_child): New function.
2447 (remote_update_thread_list): Call remote_notif_get_pending_events
2448 and remove_new_fork_child.
2449 (extended_remote_kill): Kill fork child when killing the
2450 parent before follow_fork completes.
2451 (init_extended_remote_ops): Initialize target vector with
2452 new fork catchpoint functions.
2454 2015-05-12 Don Breazeal <donb@codesourcery.com>
2456 * remote.c (remove_vfork_event_p): New function.
2457 (remote_follow_fork): Add vfork event type to event checking.
2458 (remote_parse_stop_reply): New stop reasons "vfork" and
2459 "vforkdone" for RSP 'T' Stop Reply Packet.
2461 2015-05-12 Don Breazeal <donb@codesourcery.com>
2463 * linux-nat.c (linux_nat_ptrace_options): New function.
2464 (linux_init_ptrace, wait_lwp, linux_nat_filter_event):
2465 Call linux_nat_ptrace_options and use different argument to
2466 linux_enable_event_reporting.
2467 (_initialize_linux_nat): Delete call to
2468 linux_ptrace_set_additional_flags.
2469 * nat/linux-ptrace.c (current_ptrace_options): Rename to
2470 supported_ptrace_options.
2471 (additional_flags): Delete variable.
2472 (linux_check_ptrace_features): Use supported_ptrace_options.
2473 (linux_test_for_tracesysgood, linux_test_for_tracefork):
2474 Likewise, and remove additional_flags check.
2475 (linux_enable_event_reporting): Change 'attached' argument to
2476 'options'. Use supported_ptrace_options.
2477 (ptrace_supports_feature): Change comment. Use
2478 supported_ptrace_options.
2479 (linux_ptrace_set_additional_flags): Delete function.
2480 * nat/linux-ptrace.h (linux_ptrace_set_additional_flags):
2481 Delete function prototype.
2482 * remote.c (remote_fork_event_p): New function.
2483 (remote_detach_pid): New function.
2484 (remote_detach_1): Call remote_detach_pid, don't mourn inferior
2485 if doing detach-on-fork.
2486 (remote_follow_fork): New function.
2487 (remote_parse_stop_reply): Handle new "T" stop reason "fork".
2488 (remote_pid_to_str): Print "process" strings for pid/0/0 ptids.
2489 (init_extended_remote_ops): Initialize to_follow_fork.
2491 2015-05-12 Don Breazeal <donb@codesourcery.com>
2493 * nat/linux-ptrace.c (linux_check_ptrace_features): Change
2494 from static to extern.
2495 * nat/linux-ptrace.h (linux_check_ptrace_features): Declare.
2496 * remote.c (anonymous enum): <PACKET_fork_event_feature,
2497 * PACKET_vfork_event_feature>: New enumeration constants.
2498 (remote_protocol_features): Add table entries for new packets.
2499 (remote_query_supported): Add new feature queries to qSupported
2502 2015-05-12 Gary Benson <gbenson@redhat.com>
2504 * remote.c (remote_add_inferior): Call exec_file_locate_attach
2505 for fake PIDs as well as real ones.
2506 (remote_pid_to_exec_file): Send empty annex if PID is fake.
2508 2015-05-09 Siva Chandra Reddy <sivachandra@google.com>
2510 * NEWS (Python Scripting): Mention the new gdb.Value methods.
2511 * python/py-value.c (valpy_reference_value): New function.
2512 (valpy_const_value): Likewise.
2513 (value_object_methods): Add new methods.
2514 * value.c (make_cv_value): New function.
2515 * value.h (make_cv_value): Declare.
2517 2015-05-08 Yao Qi <yao@codesourcery.com>
2518 Sandra Loosemore <sandra@codesourcery.com>
2520 * dwarf2read.c (setup_type_unit_groups): Do NULL pointer check
2521 to 'lh->include_dirs' before accessing to it.
2522 (psymtab_include_file_name): Likewise.
2523 (dwarf_decode_lines_1): Likewise.
2524 (dwarf_decode_lines): Likewise.
2525 (file_file_name): Likewise.
2527 2015-05-08 Sandra Loosemore <sandra@codesourcery.com>
2529 * nios2-linux-tdep.c (NIOS2_SIGRETURN_TRAMP_ADDR): Define.
2530 (NIOS2_SIGRETURN_REGSAVE_OFFSET): Define.
2531 (nios2_linux_rt_sigreturn_init): Adjust base address of
2534 2015-05-08 Sandra Loosemore <sandra@codesourcery.com>
2536 * nios2-tdep.c (nios2_breakpoint_from_pc): Revert to using
2537 "trap 31" as the breakpoint instruction on all targets.
2539 2015-05-08 Jan Kratochvil <jan.kratochvil@redhat.com>
2541 * infcmd.c (print_return_value): Remove unused declaration.
2543 2015-05-08 Joel Brobecker <brobecker@adacore.com>
2545 * dwarf2read.c (attr_to_dynamic_prop)
2546 <DW_AT_data_member_location>: Use read_type_die isntead of
2549 2015-05-08 Joel Brobecker <brobecker@adacore.com>
2551 * ada-lang.c (ada_convert_actual): Add handling of formals
2552 passed inside an aligner type.
2554 2015-05-08 Joel Brobecker <brobecker@adacore.com>
2556 * copyright.py (NOT_FSF_LIST): Remove sim/erc32 entries.
2558 2015-05-08 Siva Chandra Reddy <sivachandra@google.com>
2561 * python/lib/gdb/command/xmethods.py (print_xm_info): Fix typo.
2562 Print xmethod matcher status.
2564 2015-05-08 Andreas Arnez <arnez@linux.vnet.ibm.com>
2566 * s390-linux-nat.c (fill_gregset): Avoid relying on the PSWA
2567 register in the regcache when treating the PSWM register, and vice
2570 2015-05-07 Gary Benson <gbenson@redhat.com>
2572 * linux-thread-db.c (struct thread_db_info)
2573 <td_ta_map_id2thr_p>: Remove field.
2574 (try_thread_db_load_1): Remove initialization for the above.
2576 2015-05-07 Gary Benson <gbenson@redhat.com>
2578 * linux-thread-db.c (struct thread_db_info)
2579 <td_thr_validate_p>: Remove field.
2580 (try_thread_db_load_1): Remove initialization for the above.
2582 2015-05-06 Jan Kratochvil <jan.kratochvil@redhat.com>
2584 * compile/compile-object-load.c (compile_object_load): Support
2587 2015-05-06 Jan Kratochvil <jan.kratochvil@redhat.com>
2589 * compile/compile.c (compile_to_object): Make the cmd_string parameter
2590 const. Use new variables for the const compatibility.
2591 (eval_compile_command): Make the cmd_string parameter const.
2592 * compile/compile.h (eval_compile_command): Make the cmd_string
2595 2015-05-06 Joel Brobecker <brobecker@adacore.com>
2597 * defs.h (deprecated_init_ui_hook): Delete. Remove associated
2599 * top.c (deprecated_init_ui_hook): Delete.
2600 (gdb_init): Remove handling of deprecated_init_ui_hook.
2601 * interps.c (clear_interpreter_hooks): Remove handling of
2602 deprecated_init_ui_hook.
2603 * main.c (captured_main): Update comment.
2605 2015-05-06 Joel Brobecker <brobecker@adacore.com>
2607 * solib.c (_initialize_solib): Add "info dll" alias creation.
2608 * windows-nat.c (set_windows_aliases): Delete.
2609 (_initialize_windows_nat): Remove deprecated_init_ui_hook
2611 * NEWS: Add news entry about "info dll" now being available
2614 2015-05-05 Joel Brobecker <brobecker@adacore.com>
2616 * ada-lang.c (value_assign_to_component): Reformat and improve
2617 documentation. Remove all trailing spaces.
2619 2015-05-05 Joel Brobecker <brobecker@adacore.com>
2621 * inline-frame.c (inline_frame_sniffer, skip_inline_frames):
2622 Stop counting inlined frames as soon as an out-of-line function
2625 2014-05-05 Pierre-Marie de Rodat <derodat@adacore.com>
2627 * dwarf2read.c (inherit_abstract_dies): Skip
2628 DW_TAG_GNU_call_site dies while inheriting children of an
2629 abstract DIE into a scope.
2630 (read_lexical_block_scope): Inherit abstract DIE's for
2633 2015-05-05 Joel Brobecker <brobecker@adacore.com>
2635 * ada-valprint.c (val_print_packed_array_elements): Delete
2636 variable "len". Add a type-length check when comparing two
2637 consecutive elements of the array. Use the element's actual
2638 length in call to value_contents_eq.
2639 * ada-lang.c (ada_value_primitive_packed_val): Always return
2640 a value whose type has been resolved.
2642 2015-05-05 Joel Brobecker <brobecker@adacore.com>
2644 * ada-lang.c (ada_value_primitive_packed_val): Recompute
2645 BIT_SIZE and LEN if the size of the resolved type is smaller
2646 than BIT_SIZE * HOST_CHAR_BIT.
2648 2015-05-05 Joel Brobecker <brobecker@adacore.com>
2650 * ada-lang.c (ada_value_primitive_packed_val): Use a more
2651 correct address in call to value_at. Adjust call to
2652 value_address accordingly.
2654 2015-05-05 Joel Brobecker <brobecker@adacore.com>
2656 * ada-valprint.c (ada_val_print_1): Resolve TYPE before trying
2659 2015-05-05 Joel Brobecker <brobecker@adacore.com>
2661 * dwarf2loc.h (struct property_addr_info): Add "valaddr" field.
2662 * dwarf2loc.c (dwarf2_evaluate_property): Add handling of
2664 * gdbtypes.h (resolve_dynamic_type): Add "valaddr" parameter.
2665 * gdbtypes.c (resolve_dynamic_struct): Set pinfo.valaddr.
2666 (resolve_dynamic_type_internal): Set pinfo.valaddr.
2667 Add handling of addr_stack->valaddr.
2668 (resolve_dynamic_type): Add "valaddr" parameter.
2669 Set pinfo.valaddr field.
2670 * ada-lang.c (ada_discrete_type_high_bound): Update call to
2671 resolve_dynamic_type.
2672 (ada_discrete_type_low_bound): Likewise.
2673 * findvar.c (default_read_var_value): Likewise.
2674 * value.c (value_from_contents_and_address): Likewise.
2676 2015-05-05 Joel Brobecker <brobecker@adacore.com>
2678 * gdbtypes.c (resolve_dynamic_array): Use
2679 create_array_type_with_stride instead of create_array_type.
2681 2015-04-30 DJ Delorie <dj@redhat.com>
2683 * rl78-tdep.c (rl78_analyze_prologue): Pass RL78_ISA_DEFAULT to
2686 2015-04-29 Doug Evans <dje@google.com>
2689 * NEWS: Document new gdb.XMethodWorker.get_result_type method.
2690 * eval.c (evaluate_subexp_standard) <OP_FUNCALL>: Handle
2691 EVAL_AVOID_SIDE_EFFECTS for xmethods.
2692 * extension-priv.h (struct extension_language_ops)
2693 <get_xmethod_result_type>: New member.
2694 * extension.c (get_xmethod_result_type): New function.
2695 * extension.h (get_xmethod_result_type): Declare.
2696 * python/py-xmethods.c (get_result_type_method_name): New static
2698 (py_get_result_type_method_name): Ditto.
2699 (gdbpy_get_xmethod_result_type): New function.
2700 (gdbpy_initialize_xmethods): Initialize py_get_result_type_method_name.
2701 * python/python-internal.h (gdbpy_get_xmethod_result_type): Declare.
2702 * python/python.c (python_extension_ops): Add
2703 gdbpy_get_xmethod_result_type.
2704 * python/lib/gdb/xmethod.py (XMethodWorker): Add get_result_type.
2705 * valarith.c (value_x_binop): Handle EVAL_AVOID_SIDE_EFFECTS for
2707 (value_x_unop): Ditto.
2708 * value.c (result_type_of_xmethod): New function.
2709 * value.h (result_type_of_xmethod): Declare.
2711 2015-04-29 Gary Benson <gbenson@redhat.com>
2713 * solib.c (solib_find_1): Allow fd argument to be NULL.
2714 (exec_file_find): Update comment.
2715 (solib_find): Likewise.
2716 * exec.c (exec_file_locate_attach): Use NULL as fd
2717 argument to exec_file_find to avoid having to close
2719 * infrun.c (follow_exec): Likewise.
2721 2015-04-28 Doug Evans <dje@google.com>
2724 * python/lib/gdb/printing.py (register_pretty_printer): Handle
2725 name or __name__ attributes. Handle gdb module as first argument.
2727 2015-04-28 Doug Evans <dje@google.com>
2730 * python/py-prettyprint.c (print_children): Verify result of children
2731 iterator. Provide better error message.
2732 * python/python-internal..h (gdbpy_print_python_errors_p): Declare.
2733 * python/python.c (gdbpy_print_python_errors_p): New function.
2735 2015-04-28 Doug Evans <dje@google.com>
2737 * gdbtypes.h (struct cplus_struct_type) <n_baseclasses>: Fix comment.
2739 2015-04-28 Sasha Smundak <asmundak@google.com>
2741 * NEWS: Mention gdb.Type.optimized_out method.
2742 * python/py-type.c (typy_optimized_out): New function.
2744 2015-04-28 John Baldwin <jhb@FreeBSD.org>
2746 * fbsd-nat.c: Include "gdb_wait.h" instead of <sys/wait.h>.
2748 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
2750 * utils.c (init_page_info): Set rl_catch_sigwinch to zero.
2751 (initialize_utils): Move call of init_page_info() to ...
2752 * top.c (gdb_init): ... here.
2754 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
2756 * tui/tui-win.c (tui_sigwinch_handler): Remove now-stale comment.
2757 (tui_sigwinch_handler): Still update our idea of
2758 the terminal's width and height even when TUI is not active.
2760 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
2762 * utils.h (set_screen_width_and_height): Declare.
2763 * utils.c (set_screen_width_and_height): Define.
2764 * tui/tui-win.c (tui_update_gdb_sizes): Use it.
2766 2015-04-28 Gary Benson <gbenson@redhat.com>
2768 * infrun.c (solist.h): New include.
2769 (follow_exec): Use exec_file_find to prefix execd_pathname
2772 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
2774 * tui/tui-source.c (tui_set_source_content): Avoid calling
2775 strcpy() when offset is 0.
2777 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
2780 * tui/tui-data.c (tui_free_window): Don't free the locator
2781 window when passed an SRC_WIN or a DISASSEM_WIN.
2783 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
2785 * tui/tui-data.h (struct tui_win_element): Forward-declare.
2786 (tui_win_content): Move declaration.
2787 (struct tui_gen_win_info): Give 'content' field the
2788 type tui_win_content.
2789 * tui/tui-data.c (init_content_element): Remove redundant and
2791 (tui_add_content_elements): Remove erroneous cast.
2792 * tui/tui-disasm.c (tui_set_disassem_content): Remove redundant
2794 (tui_get_begin_asm_address): Likewise.
2795 * tui/tui-regs.c (tui_show_registers): Likewise.
2796 (tui_show_register_group): Likewise.
2797 (tui_display_registers_from): Likewise.
2798 (tui_check_register_values): Likewise.
2799 * tui/tui-source.c (tui_set_source_content): Likewise.
2800 (tui_set_source_content_nil): Likewise.
2801 (tui_source_is_displayed): Likewise.
2802 * tui/tui-stack.c (tui_show_locator_content): Likewise.
2803 (tui_set_locator_fullname): Likewise.
2804 (tui_set_locator_info): Likewise.
2805 (tui_show_frame_info): Likewise.
2806 * tui/tui-winsource.c (tui_clear_source_content): Likewise.
2807 (tui_show_source_line): Likewise.
2808 (tui_horizontal_source_scroll): Likewise.
2809 (tui_update_breakpoint_info): Likewise.
2810 (tui_set_exec_info_content): Likewise.
2811 (tui_show_exec_info_content): Likewise.
2812 (tui_alloc_source_buffer): Likewise.
2813 (tui_line_is_displayed): Likewise.
2814 (tui_addr_is_displayed): Likewise.
2816 2015-04-27 John Baldwin <jhb@FreeBSD.org>
2818 * fbsd-nat.c: (fbsd_wait) [PL_FLAG_EXEC]: Report TARGET_WAITKIND_EXECD
2819 event if PL_FLAG_EXEC is set.
2820 [PL_FLAG_EXEC] (fbsd_insert_exec_catchpoint): New function.
2821 [PL_FLAG_EXEC] (fbsd_remove_exec_catchpoint): New function.
2822 (fbsd_nat_add_target) [PL_FLAG_EXEC]: Set
2823 "to_insert_exec_catchpoint" to "fbsd_insert_exec_catchpoint".
2824 Set "to_remove_exec_catchpoint" to "fbsd_remove_exec_catchpoint".
2826 2015-04-27 John Baldwin <jhb@FreeBSD.org>
2828 * fbsd-nat.c: [PT_LWPINFO] New variable super_wait.
2829 [TDP_RFPPWAIT] New variable fbsd_pending_children.
2830 [TDP_RFPPWAIT] (fbsd_remember_child): New function.
2831 [TDP_RFPPWAIT] (fbsd_is_child_pending): New function.
2832 [TDP_RFPPWAIT] (fbsd_fetch_kinfo_proc): New function.
2833 [PT_LWPINFO] (fbsd_wait): New function.
2834 [TDP_RFPPWAIT] (fbsd_follow_fork): New function.
2835 [TDP_RFPPWAIT] (fbsd_insert_fork_catchpoint): New function.
2836 [TDP_RFPPWAIT] (fbsd_remove_fork_catchpoint): New function.
2837 [TDP_RFPPWAIT] (fbsd_insert_vfork_catchpoint): New function.
2838 [TDP_RFPPWAIT] (fbsd_remove_vfork_catchpoint): New function.
2839 [TDP_RFPPWAIT] (fbsd_enable_follow_fork): New function.
2840 [TDP_RFPPWAIT] (fbsd_post_startup_inferior): New function.
2841 [TDP_RFPPWAIT] (fbsd_post_attach): New function.
2842 (fbsd_nat_add_target) [PT_LWPINFO] Set "to_wait" to
2844 [TDP_RFPPWAIT] Set "to_follow_fork" to "fbsd_follow_fork".
2845 Set "to_insert_fork_catchpoint" to "fbsd_insert_fork_catchpoint".
2846 Set "to_remove_fork_catchpoint" to "fbsd_remove_fork_catchpoint".
2847 Set "to_insert_vfork_catchpoint" to "fbsd_insert_vfork_catchpoint".
2848 Set "to_remove_vfork_catchpoint" to "fbsd_remove_vfork_catchpoint".
2849 Set "to_post_startup_inferior" to "fbsd_post_startup_inferior".
2850 Set "to_post_attach" to "fbsd_post_attach".
2852 2015-04-27 John Baldwin <jhb@FreeBSD.org>
2854 * fbsd-nat.c (fbsd_pid_to_exec_file): Mark static.
2855 (fbsd_find_memory_regions): Mark static.
2856 (fbsd_nat_add_target): New function.
2857 * fbsd-nat.h: Export fbsd_nat_add_target and remove prototypes for
2858 fbsd_pid_to_exec_file and fbsd_find_memory_regions.
2859 * amd64fbsd-nat.c (_initialize_amd64fbsd_nat): Use fbsd_nat_add_target.
2860 * i386fbsd-nat.c (_initialize_i386fbsd_nat): Likewise.
2861 * ppcfbsd-nat.c (_initialize_ppcfbsd_nat): Likewise.
2862 * sparc64fbsd-nat.c (_initialize_sparc64fbsd_nat): Likewise.
2864 2015-04-27 Gary Benson <gbenson@redhat.com>
2866 * objfiles.c (allocate_objfile): Do not attempt to expand name
2867 if name is a "target:" filename.
2868 * auto-load.c (load_auto_scripts_for_objfile): Do not attempt
2869 to load auto-load scripts for objfiles with "target:" filenames.
2871 2015-04-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
2873 * s390-linux-tdep.c: Include "elf/s390.h" and "elf-bfd.h".
2874 (enum s390_vector_abi_kind): New enum.
2875 (struct gdbarch_tdep)<vector_abi>: New field.
2876 (s390_effective_inner_type): Add parameter min_size. Stop
2877 unwrapping if the inner type is smaller than min_size.
2878 (s390_function_arg_float): Adjust call to
2879 s390_effective_inner_type.
2880 (s390_function_arg_vector): New function.
2881 (s390_function_arg_integer): Adjust comment.
2882 (struct s390_arg_state)<vr>: New field.
2883 (s390_handle_arg): Add parameter 'is_unnamed'. Pass vector
2884 arguments according to vector ABI when appropriate.
2885 (s390_push_dummy_call): Initialize the argument state's field
2886 'vr'. Adjust calls to s390_handle_arg.
2887 (s390_register_return_value): Handle vector return values.
2888 (s390_return_value): Apply the "register" return value convention
2889 to a vector when appropriate.
2890 (s390_gdbarch_init): Initialize tdep->vector_abi.
2891 * NEWS: Announce S390 vector ABI support.
2893 2015-04-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
2895 * s390-linux-tdep.c (s390_return_value_convention): Remove
2896 function. Inline its logic...
2897 (s390_return_value): ...here. Instead, move the handling of the
2898 "register" return value convention...
2899 (s390_register_return_value): ...here. New function.
2901 2015-04-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
2904 (is_float_singleton): Remove function. Move the "singleton" part
2906 (s390_effective_inner_type): ...here. New function.
2907 (is_float_like): Remove function. Inline its logic...
2908 (s390_function_arg_float): ...here.
2909 (is_pointer_like, is_integer_like, is_struct_like): Remove
2910 functions. Inline their logic...
2911 (s390_function_arg_integer): ...here.
2912 (s390_function_arg_pass_by_reference): Remove function.
2913 (extend_simple_arg): Remove function.
2914 (alignment_of): Remove function.
2915 (struct s390_arg_state): New structure.
2916 (s390_handle_arg): New function.
2917 (s390_push_dummy_call): Move parameter placement logic to the new
2918 function s390_handle_arg. Call it for calculating the stack area
2919 sizes first, and again for actually writing the parameters.
2921 2015-04-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
2923 * s390-linux-tdep.c (is_power_of_two): Add comment. Return
2924 false if the argument is zero.
2926 2015-04-27 Pierre-Marie de Rodat <derodat@adacore.com>
2928 * ada-lang.c (template_to_static_fixed_type): Return input type
2929 when it is already fixed. Cache the input type itself when not
2930 creating a static fixed copy. Make it explicit that we never
2931 molestate the input type.
2932 * gdbtypes.c (resolve_dynamic_struct): Reset the
2933 TYPE_TARGET_TYPE field for resolved copies.
2935 2015-04-27 Joel Brobecker <brobecker@adacore.com>
2937 * ada-lang.c (ada_is_tagged_type): Add call to ada_check_typedef.
2938 (ada_lookup_struct_elt_type): Remove calls to ada_check_typedef.
2939 (template_to_static_fixed_type): Call ada_check_typedef only
2942 2015-04-24 Andrew Burgess <andrew.burgess@embecosm.com>
2944 * cli/cli-dump.c (srec_dump_command): Add internationalization
2946 (ihex_dump_command): Likewise.
2947 (tekhex_dump_command): Likewise.
2948 (binary_dump_command): Likewise.
2949 (binary_append_command): Likewise.
2951 2015-04-24 Andrew Burgess <andrew.burgess@embecosm.com>
2953 * cli/cli-dump.c (verilog_cmdlist): New variable.
2954 (dump_verilog_memory): New function.
2955 (dump_verilog_value): New function.
2956 (verilog_dump_command): New function.
2957 (_initialize_cli_dump): Add new commands to support verilog dump
2959 * NEWS: Add entry for "dump verilog".
2961 2015-04-24 Pierre-Marie de Rodat <derodat@adacore.com>
2963 * gdbtypes.c (print_gnat_stuff): Do not recurse on the
2964 descriptive type when there is none.
2966 2015-04-23 Patrick Palka <patrick@parcs.ath.cx>
2968 * tui/tui-win.c (tui_async_resize_screen): Call
2969 rl_resize_terminal().
2971 2015-04-22 Jon Turney <jon.turney@dronecode.org.uk>
2973 * windows-nat.c (handle_output_debug_string): Don't change
2974 current_event.dwThreadId.
2975 (get_windows_debug_event): Use thread_id, rather than relying on
2976 current_event.dwThreadId being changed.
2978 2015-04-22 Jon Turney <jon.turney@dronecode.org.uk>
2980 * windows-nat.c (windows_continue): Report an error if
2981 ContinueDebugEvent() fails.
2983 2015-04-16 Jon Turney <jon.turney@dronecode.org.uk>
2985 * windows-nat.c (windows_resume): Fix misspelling in debug output.
2987 2015-04-16 Jon Turney <jon.turney@dronecode.org.uk>
2989 * windows-nat.c (get_windows_debug_event): Replace retval with
2990 thread_id throughout. Update stale comment.
2992 2015-04-16 Jon Turney <jon.turney@dronecode.org.uk>
2994 * windows-nat.c (get_windows_debug_event): Don't use ternary
2995 conditional operator.
2997 2015-04-21 Pierre Muller <muller@sourceware.org>
3000 p-exp.y (yylex): Reorganize code to return the matched pattern
3001 for a field of this.
3003 2015-04-21 Gary Benson <gbenson@redhat.com>
3005 * common/fileio.h (fileio_to_host_openflags): New declaration.
3006 * common/fileio.c (fcntl.h): New include.
3007 (fileio_to_host_openflags): New function, factored out from...
3008 * inf-child.c (inf_child_fileio_open_flags_to_host): ...here.
3011 2015-04-21 Kevin Buettner <kevinb@redhat.com>
3013 * rl78-tdep.c (RL78_SP_ADDR): Define.
3014 (opc_reg_to_gdb_regnum): New static function.
3015 (rl78_analyze_prologue): Recognize instructions forming slightly
3016 more interesting prologues.
3018 2015-04-20 Pierre-Marie de Rodat <derodat@adacore.com>
3021 2015-04-03 Pierre-Marie de Rodat <derodat@adacore.com>
3022 * gdbtypes.c (is_dynamic_type_internal): Remove special handling of
3023 TYPE_CODE_REF types so that they are not considered as dynamic
3024 depending on the referenced type.
3025 (resolve_dynamic_type_internal): Likewise.
3027 2015-04-20 Pierre-Marie de Rodat <derodat@adacore.com>
3030 2015-04-03 Pierre-Marie de Rodat <derodat@adacore.com>
3031 * gdbtypes.c (is_dynamic_type_internal): Remove the unused
3032 "top_level" parameter.
3033 (resolve_dynamic_type_internal): Remove the unused "top_level"
3034 parameter. Update call to is_dynamic_type_internal.
3035 (is_dynamic_type): Update call to is_dynamic_type_internal.
3036 (resolve_dynamic_range): Update call to
3037 resolve_dynamic_type_internal.
3038 (resolve_dynamic_union): Likewise.
3039 (resolve_dynamic_struct): Likewise.
3040 (resolve_dynamic_type): Likewise.
3042 2015-04-19 Gabriel Krisman Bertazi <gabriel@krisman.be>
3044 * breakpoint.c (update_dprintf_command_list): Remove duplicated
3047 2015-04-20 Thomas Schwinge <thomas@codesourcery.com>
3049 * reply_mig_hack.awk: Robustify parsing.
3051 * reply_mig_hack.awk: Don't bother to declare an intermediate
3052 function pointer variable.
3054 2015-04-17 Doug Evans <dje@google.com>
3056 * solib-svr4.c (svr4_exec_displacement): Rename outer "displacement"
3057 to "exec_displacement" to avoid confusion with inner use of the name.
3059 2015-04-17 Pedro Alves <palves@redhat.com>
3061 * arm-linux-nat.c (arm_linux_can_use_hw_breakpoint): Return zero
3062 if HW point of TYPE isn't supported.
3064 2015-04-17 Yao Qi <yao.qi@linaro.org>
3065 Pedro Alves <palves@redhat.com>
3067 * target.h (target_can_use_hardware_watchpoint): Update comments.
3068 Remove trailing ";".
3070 2015-04-17 Gary Benson <gbenson@redhat.com>
3072 * remote.c (remote_add_inferior): New argument try_open_exec.
3073 If nonzero, attempt to open the inferior's executable file as
3074 the main executable if no main executable is open already.
3075 All callers updated.
3076 * NEWS: Mention that GDB now supports automatic location and
3077 retrieval of executable + files from remote targets.
3079 2015-04-17 Gary Benson <gbenson@redhat.com>
3081 * target.h (TARGET_OBJECT_EXEC_FILE): New enum value.
3082 * remote.c (PACKET_qXfer_exec_file): Likewise.
3083 (remote_protocol_features): Register the
3084 "qXfer:exec-file:read" feature.
3085 (remote_xfer_partial): Handle TARGET_OBJECT_EXEC_FILE.
3086 (remote_pid_to_exec_file): New function.
3087 (init_remote_ops): Initialize to_pid_to_exec_file.
3088 (_initialize_remote): Register new "set/show remote
3089 pid-to-exec-file-packet" command.
3090 * NEWS: Announce new qXfer:exec-file:read packet.
3092 2015-04-17 Gary Benson <gbenson@redhat.com>
3094 * nat/linux-procfs.h (linux_proc_pid_to_exec_file):
3096 * nat/linux-procfs.c (linux_proc_pid_to_exec_file):
3097 New function, factored out from...
3098 * linux-nat.c (linux_child_pid_to_exec_file): ...here.
3100 2015-04-17 Gary Benson <gbenson@redhat.com>
3102 * exec.c (solist.h): New include.
3103 (exec_file_locate_attach): Prefix absolute executable
3104 paths with gdb_sysroot if set.
3105 * NEWS: Mention that executable paths may be prepended
3108 2015-04-17 Gary Benson <gbenson@redhat.com>
3110 * solist.h (exec_file_find): New declaration.
3111 * solib.c (solib_find_1): New function, factored out from...
3112 (solib_find): ...here.
3113 (exec_file_find): New function.
3115 2015-04-17 Gary Benson <gbenson@redhat.com>
3117 * gdbcore.h (exec_file_locate_attach): New declaration.
3118 * exec.c (exec_file_locate_attach): New function, factored
3120 * infcmd.c (attach_command_post_wait): ...here.
3122 2015-04-17 Mike Frysinger <vapier@gentoo.org>
3124 * MAINTAINERS: Add myself for Blackfin/write-after-approval.
3126 2015-04-16 Yao Qi <yao.qi@linaro.org>
3128 * infrun.c (maybe_software_singlestep): Declare.
3129 (displaced_step_fixup): Call maybe_software_singlestep.
3131 2015-04-15 Doug Evans <dje@google.com>
3133 * psymtab.c (psym_expand_symtabs_matching): Add QUIT call.
3135 2015-04-15 Doug Evans <dje@google.com>
3137 * dwarf2read.c (dw2_expand_symtabs_matching): Add some QUIT calls.
3139 2015-04-15 Simon Marchi <simon.marchi@ericsson.com>
3141 * python/lib/gdb/command/unwinders.py: Add parentheses.
3143 2015-04-15 Yao Qi <yao.qi@linaro.org>
3145 * arm-linux-tdep.c (arm_linux_copy_svc): Update debug message.
3147 2015-04-15 Yao Qi <yao.qi@linaro.org>
3149 * arm-linux-tdep.c (arm_linux_copy_svc): Fix indentation.
3151 2015-04-15 Yao Qi <yao.qi@linaro.org>
3153 * arm-linux-tdep.c (arm_linux_cleanup_svc): Use
3154 dsc->insn_size instead of 4.
3156 2015-04-14 Gary Benson <gbenson@redhat.com>
3158 * jit.c (mem_bfd_iovec_stat): Zero supplied buffer.
3159 * minidebug.c (lzma_stat): Likewise.
3160 * solib-spu.c (spu_bfd_iovec_stat): Likewise.
3161 * spu-linux-nat.c (spu_bfd_iovec_stat): Likewise.
3163 2015-04-13 Stan Shebs <stanshebs@google.com>
3165 * MAINTAINERS: Update my email address.
3167 2015-04-13 John Baldwin <jhb@FreeBSD.org>
3169 * amd64-tdep.c (amd64_target_description): New function.
3170 * amd64-tdep.h: Export amd64_target_description and tdesc_amd64.
3171 * amd64bsd-nat.c [PT_GETXSTATE_INFO]: New variable amd64bsd_xsave_len.
3172 (amd64bsd_fetch_inferior_registers) [PT_GETXSTATE_INFO]: Handle
3173 x86 extended save area.
3174 (amd64bsd_store_inferior_registers) [PT_GETXSTATE_INFO]: Likewise.
3175 * amd64bsd-nat.h: Export amd64bsd_xsave_len.
3176 * amd64fbsd-nat.c (amd64fbsd_read_description): New function.
3177 (_initialize_amd64fbsd_nat): Set "to_read_description" to
3178 "amd64fbsd_read_description".
3179 * amd64fbsd-tdep.c (amd64fbsd_core_read_description): New function.
3180 (amd64fbsd_supply_xstateregset): New function.
3181 (amd64fbsd_collect_xstateregset): New function.
3182 Add "amd64fbsd_xstateregset".
3183 (amd64fbsd_iterate_over_regset_sections): New function.
3184 (amd64fbsd_init_abi): Set "xsave_xcr0_offset" to
3185 "I386_FBSD_XSAVE_XCR0_OFFSET".
3186 Add "iterate_over_regset_sections" gdbarch method.
3187 Add "core_read_description" gdbarch method.
3188 * i386-tdep.c (i386_target_description): New function.
3189 * i386-tdep.h: Export i386_target_description and tdesc_i386.
3190 * i386bsd-nat.c [PT_GETXSTATE_INFO]: New variable i386bsd_xsave_len.
3191 (i386bsd_fetch_inferior_registers) [PT_GETXSTATE_INFO]: Handle
3192 x86 extended save area.
3193 (i386bsd_store_inferior_registers) [PT_GETXSTATE_INFO]: Likewise.
3194 * i386bsd-nat.h: Export i386bsd_xsave_len.
3195 * i386fbsd-nat.c (i386fbsd_read_description): New function.
3196 (_initialize_i386fbsd_nat): Set "to_read_description" to
3197 "i386fbsd_read_description".
3198 * i386fbsd-tdep.c (i386fbsd_core_read_xcr0): New function.
3199 (i386fbsd_core_read_description): New function.
3200 (i386fbsd_supply_xstateregset): New function.
3201 (i386fbsd_collect_xstateregset): New function.
3202 Add "i386fbsd_xstateregset".
3203 (i386fbsd_iterate_over_regset_sections): New function.
3204 (i386fbsd4_init_abi): Set "xsave_xcr0_offset" to
3205 "I386_FBSD_XSAVE_XCR0_OFFSET".
3206 Add "iterate_over_regset_sections" gdbarch method.
3207 Add "core_read_description" gdbarch method.
3208 * i386fbsd-tdep.h: New file.
3210 2015-04-11 Jan Kratochvil <jan.kratochvil@redhat.com>
3212 * NEWS (Changes since GDB 7.9): Add removed -xdb.
3213 * breakpoint.c (command_line_is_silent): Remove xdb_commands
3215 (_initialize_breakpoint): Remove xdb_commands for bc, ab, sb, db, ba
3217 * cli/cli-cmds.c (_initialize_cli_cmds): Remove xdb_commands for v and
3219 * cli/cli-decode.c (find_command_name_length): Remove xdb_commands
3221 * defs.h (xdb_commands): Remove declaration.
3222 * f-valprint.c (_initialize_f_valprint): Remove xdb_commands for lc.
3223 * guile/scm-cmd.c (command_classes): Remove xdb from comment.
3224 * infcmd.c (run_no_args_command, go_command): Remove.
3225 (_initialize_infcmd): Remove xdb_commands for S, go, g, R and lr.
3226 * infrun.c (xdb_handle_command): Remove.
3227 (_initialize_infrun): Remove xdb_commands for lz and z.
3228 * main.c (xdb_commands): Remove variable.
3229 (captured_main): Remove "xdb" from long_options.
3230 (print_gdb_help): Remove --xdb from help.
3231 * python/py-cmd.c (gdbpy_initialize_commands): Remove xdb from comment.
3232 * source.c (_initialize_source): Remove xdb_commands for D, ld, / and ?.
3233 * stack.c (backtrace_full_command, args_plus_locals_info)
3234 (current_frame_command): Remove.
3235 (_initialize_stack): Remove xdb_commands for t, T and l.
3236 * symtab.c (_initialize_symtab): Remove xdb_commands for lf and lg.
3237 * thread.c (_initialize_thread): Remove xdb_commands condition.
3238 * tui/tui-layout.c (tui_toggle_layout_command)
3239 (tui_toggle_split_layout_command, tui_handle_xdb_layout): Remove.
3240 (_initialize_tui_layout): Remove xdb_commands for td and ts.
3241 * tui/tui-regs.c (tui_scroll_regs_forward_command)
3242 (tui_scroll_regs_backward_command): Remove.
3243 (_initialize_tui_regs): Remove xdb_commands for fr, gr, sr, +r and -r.
3244 * tui/tui-win.c (tui_xdb_set_win_height_command): Remove.
3245 (_initialize_tui_win): Remove xdb_commands for U and w.
3246 * utils.c (pagination_on_command, pagination_off_command): Remove.
3247 (initialize_utils): Remove xdb_commands for am and sm.
3249 2015-04-10 Pedro Alves <palves@redhat.com>
3251 * infrun.c (displaced_step_fixup): Switch to the event ptid
3252 earlier. If the thread stopped for a watchpoint and the
3253 target/arch has non-continuable watchpoints, cancel the displaced
3255 (resume): Don't start a displaced step if in-line step-over info
3258 2015-04-10 Pedro Alves <palves@redhat.com>
3260 * infrun.c (displaced_step_in_progress): New function.
3261 (do_target_resume): Advise target to report all signals if
3264 2015-04-10 Pedro Alves <palves@redhat.com>
3267 * infrun.c (process_event_stop_test): Don't assume a step-resume
3268 is set if tp->stepped_breakpoint is true.
3270 2015-04-10 Yao Qi <yao.qi@linaro.org>
3272 * arm-tdep.c (install_alu_reg): Update comment.
3273 (thumb_copy_alu_reg): Remove local variable rn. Update
3274 debugging message. Use r2 instead of r1 in the modified
3277 2015-04-10 Pedro Alves <palves@redhat.com>
3280 * amd64-linux-tdep.c (amd64_linux_init_abi_common): Install
3281 linux_displaced_step_location as gdbarch_displaced_step_location
3283 * arm-linux-tdep.c (arm_linux_init_abi): Likewise.
3284 * i386-linux-tdep.c (i386_linux_init_abi): Likewise.
3285 * linux-tdep.c (linux_displaced_step_location): New function,
3286 based on ppc_linux_displaced_step_location.
3287 * linux-tdep.h (linux_displaced_step_location): New declaration.
3288 * ppc-linux-tdep.c (ppc_linux_entry_point_addr): Delete.
3289 (ppc_linux_inferior_created, ppc_linux_displaced_step_location):
3291 (ppc_linux_init_abi): Install linux_displaced_step_location as
3292 gdbarch_displaced_step_location hook, even without Cell/B.E..
3293 (_initialize_ppc_linux_tdep): Don't install
3294 ppc_linux_inferior_created as inferior_created observer.
3295 * s390-linux-tdep.c (s390_gdbarch_init): Install
3296 linux_displaced_step_location as gdbarch_displaced_step_location
3299 2015-04-09 Gary Benson <gbenson@redhat.com>
3301 * common/common-remote-fileio.h: Rename to...
3302 * common/fileio.h: ...this. Update all references.
3303 (remote_fileio_to_fio_error): Rename to...
3304 (host_to_fileio_error): ...this.
3305 (remote_fileio_to_be): Rename to...
3306 (host_to_bigendian): ...this. Update all callers.
3307 (remote_fileio_to_fio_uint): Rename to...
3308 (host_to_fileio_uint): ...this. Update all callers.
3309 (remote_fileio_to_fio_time): Rename to...
3310 (host_to_fileio_time): ...this. Update all callers.
3311 (remote_fileio_to_fio_stat): Rename to...
3312 (host_to_fileio_stat): ...this.
3313 Update all references.
3314 * common/common-remote-fileio.c: Rename to...
3315 * common/fileio.c: ...this. Update all references.
3316 (remote_fileio_to_fio_error): Rename to...
3317 (host_to_fileio_error): ...this. Update all callers.
3318 (remote_fileio_mode_to_target): Rename to...
3319 (fileio_mode_pack): ...this. Update all callers.
3320 (remote_fileio_to_fio_mode): Rename to...
3321 (host_to_fileio_mode): ...this. Update all callers.
3322 (remote_fileio_to_fio_ulong): Rename to...
3323 (host_to_fileio_ulong): ...this. Update all callers.
3324 (remote_fileio_to_fio_stat): Rename to...
3325 (host_to_fileio_stat): ...this. Update all callers.
3327 2015-04-09 Andy Wingo <wingo@igalia.com>
3329 * guile/scm-frame.c (gdbscm_frame_read_register): New function.
3330 (frame_functions): Bind gdbscm_frame_read_register to
3331 frame-read-register.
3332 * guile/lib/gdb.scm (frame-read-register): Export.
3334 2015-04-09 Gary Benson <gbenson@redhat.com>
3336 * common/common-remote-fileio.h (remote_fileio_to_fio_error):
3338 * common/common-remote-fileio.c (remote_fileio_to_fio_error):
3339 New function, factored out the named functions below.
3340 * inf-child.c (gdb/fileio.h): Remove include.
3341 (common-remote-fileio.h): New include.
3342 (inf_child_errno_to_fileio_error): Remove function. Update
3343 all callers to use remote_fileio_to_fio_error.
3344 * remote-fileio.c (remote_fileio_errno_to_target): Likewise.
3346 2015-04-09 Andy Wingo <wingo@igalia.com>
3348 * MAINTAINERS (Write After Approval): Add Andy Wingo.
3350 2015-04-09 H.J. Lu <hongjiu.lu@intel.com>
3352 * acinclude.m4: (GDB_AC_CHECK_BFD): Set ZLIBDIR with $zlibdir.
3353 Replace $zlibdir with $ZLIBDIR in LDFLAGS.
3354 * configure: Regenerated.
3356 2015-04-09 Pedro Alves <palves@redhat.com>
3358 * gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add strtok_r.
3359 * gnulib/Makefile.in (aclocal_m4_deps): Add import/m4/strtok_r.m4.
3360 * gnulib/configure, gnulib/config.in, gnulib/aclocal.m4: Regenerate.
3361 * gnulib/import/Makefile.am: Update.
3362 * gnulib/import/Makefile.in: Update.
3363 * gnulib/import/m4/gnulib-cache.m4: Update.
3364 * gnulib/import/m4/gnulib-comp.m4: Update.
3365 * gnulib/import/m4/strtok_r.m4: New file.
3366 * gnulib/import/strtok_r.c: New file.
3368 2015-04-09 Pedro Alves <palves@redhat.com>
3370 * gnulib/update-gnulib.sh (aclocal version check): Filter out
3371 "called too early to check prototype".
3373 2015-04-08 Sergio Durigan Junior <sergiodj@redhat.com>
3376 * python/py-cmd.c (cmdpy_completer_helper): Adjust function to not
3377 use a caching mechanism. Adjust comments and code to reflect
3378 that. Replace 'sizeof' by 'strlen' when fetching 'wordobj'.
3379 (cmdpy_completer_handle_brkchars): Adjust call to
3380 cmdpy_completer_helper. Call Py_XDECREF for 'resultobj'.
3381 (cmdpy_completer): Likewise.
3383 2015-04-08 Yao Qi <yao.qi@linaro.org>
3385 * spu-tdep.c (spu_gdbarch_init): Don't call
3386 set_gdbarch_cannot_step_breakpoint.
3388 2015-04-07 Sergio Durigan Junior <sergiodj@redhat.com>
3390 * linux-tdep.c (decode_vmflags): Initialize 'saveptr'.
3392 2015-04-07 Pedro Alves <palves@redhat.com>
3394 * gdbthread.h (ALL_NON_EXITED_THREADS_SAFE): Rename to ...
3395 (ALL_THREADS_SAFE): ... this, and don't skip exited threads.
3396 (delete_exited_threads): New declaration.
3397 * infrun.c (follow_exec): Use ALL_THREADS_SAFE.
3398 * linux-nat.c (linux_nat_update_thread_list): New function.
3399 (linux_nat_add_target): Install it.
3400 * remote.c (remote_update_thread_list): Use ALL_THREADS_SAFE.
3401 * thread.c (prune_threads): Use ALL_THREADS_SAFE.
3402 (delete_exited_threads): New function.
3404 2015-04-07 Pedro Alves <pedro@codesourcery.com>
3406 * infrun.c (resume) <displaced stepping debug output>: Get the
3407 leader thread's regcache, not resume_ptid's.
3409 2015-04-06 Doug Evans <xdje42@gmail.com>
3411 * symtab.c (hash_symbol_entry): Hash STRUCT_DOMAIN symbols as
3413 (symbol_cache_lookup): Clarify use of bsc_ptr, slot_ptr parameters.
3414 Include symbol domain in debugging output.
3416 2015-04-06 Pedro Alves <palves@redhat.com>
3417 Bernd Edlinger <bernd.edlinger@hotmail.de>
3419 * configure.ac: Remove the mingw32-specific stub-termcap.o
3420 fallback, and instead fallback to the stub termcap on all hosts.
3421 * configure: Regenerate.
3422 * stub-termcap.c [!__MINGW32__] (PC, BC, UP): Define as weak
3425 2015-04-03 Pierre-Marie de Rodat <derodat@adacore.com>
3427 * gdbtypes.c (is_dynamic_type_internal): Remove the unused
3428 "top_level" parameter.
3429 (resolve_dynamic_type_internal): Remove the unused "top_level"
3430 parameter. Update call to is_dynamic_type_internal.
3431 (is_dynamic_type): Update call to is_dynamic_type_internal.
3432 (resolve_dynamic_range): Update call to
3433 resolve_dynamic_type_internal.
3434 (resolve_dynamic_union): Likewise.
3435 (resolve_dynamic_struct): Likewise.
3436 (resolve_dynamic_type): Likewise.
3438 2015-04-03 Pierre-Marie de Rodat <derodat@adacore.com>
3440 * gdbtypes.c (is_dynamic_type_internal): Remove special handling of
3441 TYPE_CODE_REF types so that they are not considered as dynamic
3442 depending on the referenced type.
3443 (resolve_dynamic_type_internal): Likewise.
3445 2015-04-02 H.J. Lu <hongjiu.lu@intel.com>
3447 * Makefile.in (top_srcdir): New.
3448 * configure: Regenerated.
3450 2015-04-02 Gary Benson <gbenson@redhat.com>
3452 * NEWS: Announce the new default sysroot of "target:".
3454 2015-04-02 Gary Benson <gbenson@redhat.com>
3456 * main.c (captured_main): Set gdb_sysroot to "target:"
3457 if not otherwise set.
3459 2015-04-02 Gary Benson <gbenson@redhat.com>
3461 * exec.c (exec_file_attach): Support "target:" filenames.
3463 2015-04-02 Gary Benson <gbenson@redhat.com>
3465 * solib.c (solib_find): Strip "target:" prefix from sysroot
3466 if accessing local files.
3468 2015-04-02 Gary Benson <gbenson@redhat.com>
3470 * symfile.c (symfile_bfd_open): Reorder to remove duplicated
3471 checks and error messages.
3473 2015-04-02 Gary Benson <gbenson@redhat.com>
3475 * remote.h (REMOTE_SYSROOT_PREFIX): Remove definition.
3476 (remote_filename_p): Remove declaration.
3477 (remote_bfd_open): Likewise.
3478 * remote.c (remote_bfd_iovec_open): Remove function.
3479 (remote_bfd_iovec_close): Likewise.
3480 (remote_bfd_iovec_pread): Likewise.
3481 (remote_bfd_iovec_stat): Likewise.
3482 (remote_filename_p): Likewise.
3483 (remote_bfd_open): Likewise.
3484 * symfile.h (gdb_bfd_open_maybe_remote): Remove declaration.
3485 * symfile.c (separate_debug_file_exists): Use gdb_bfd_open.
3486 (gdb_bfd_open_maybe_remote): Remove function.
3487 (symfile_bfd_open): Replace remote filename check with
3488 target filename check.
3489 (reread_symbols): Use gdb_bfd_open.
3490 * build-id.c (gdbcore.h): New include.
3491 (build_id_to_debug_bfd): Use gdb_bfd_open.
3492 * infcmd.c (attach_command_post_wait): Remove remote filename
3494 * solib.c (solib_find): Replace remote-specific handling with
3495 target-specific handling. Update comments where necessary.
3496 (solib_bfd_open): Replace remote-specific handling with
3497 target-specific handling.
3498 (gdb_sysroot_changed): New function.
3499 (_initialize_solib): Call the above when gdb_sysroot changes.
3500 * windows-tdep.c (gdbcore.h): New include.
3501 (windows_xfer_shared_library): Use gdb_bfd_open.
3503 2015-04-02 Gary Benson <gbenson@redhat.com>
3505 * gdb/gdb_bfd.h (TARGET_SYSROOT_PREFIX): New definition.
3506 (is_target_filename): New declaration.
3507 (gdb_bfd_has_target_filename): Likewise.
3508 (gdb_bfd_open): Update documentation comment.
3509 * gdb_bfd.c (target.h): New include.
3510 (gdb/fileio.h): Likewise.
3511 (is_target_filename): New function.
3512 (gdb_bfd_has_target_filename): Likewise.
3513 (fileio_errno_to_host): Likewise.
3514 (gdb_bfd_iovec_fileio_open): Likewise.
3515 (gdb_bfd_iovec_fileio_pread): Likewise.
3516 (gdb_bfd_iovec_fileio_close): Likewise.
3517 (gdb_bfd_iovec_fileio_fstat): Likewise.
3518 (gdb_bfd_open): Use target fileio to access paths prefixed
3519 with "target:" where necessary.
3521 2015-04-02 Gary Benson <gbenson@redhat.com>
3523 * target.h (struct target_ops) <to_filesystem_is_local>:
3525 (target_filesystem_is_local): New macro.
3526 * target-delegates.c: Regenerate.
3527 * remote.c (remote_filesystem_is_local): New function.
3528 (init_remote_ops): Initialize to_filesystem_is_local.
3530 2015-04-02 Gary Benson <gbenson@redhat.com>
3532 * target.h (struct target_ops) <to_fileio_fstat>: New field.
3533 (target_fileio_fstat): New declaration.
3534 * target.c (target_fileio_fstat): New function.
3535 * inf-child.c (inf_child_fileio_fstat): Likewise.
3536 (inf_child_target): Initialize to_fileio_fstat.
3537 * remote.c (init_remote_ops): Likewise.
3539 2015-04-01 Sasha Smundak <asmundak@google.com>
3541 * Makefile.in (SUBDIR_PYTHON_OBJS): Add py-unwind.o.
3542 (SUBDIR_PYTHON_SRCS): Add py-unwind.c.
3543 (py-unwind.o): New recipe.
3544 * NEWS: mention Python frame unwinding.
3545 * data-directory/Makefile.in (PYTHON_FILE_LIST): Add
3546 gdb/unwinder.py and gdb/command/unwinder.py
3547 * python/lib/gdb/__init__.py (packages): Add frame_unwinders
3549 (execute_unwinders): New function.
3550 * python/lib/gdb/command/unwinders.py: New file.
3551 * python/lib/gdb/unwinder.py: New file.
3552 * python/py-objfile.c (objfile_object): Add frame_unwinders field.
3553 (objfpy_dealloc): Decrement frame_unwinders reference count.
3554 (objfpy_initialize): Create frame_unwinders list.
3555 (objfpy_get_frame_unwinders): New function.
3556 (objfpy_set_frame_unwinders): Ditto.
3557 (objfile_getset): Add frame_unwinders attribute to Objfile.
3558 * python/py-progspace.c (pspace_object): Add frame_unwinders field.
3559 (pspy_dealloc): Decrement frame_unwinders reference count.
3560 (pspy_initialize): Create frame_unwinders list.
3561 (pspy_get_frame_unwinders): New function.
3562 (pspy_set_frame_unwinders): Ditto.
3563 (pspy_getset): Add frame_unwinders attribute to gdb.Progspace.
3564 * python/py-unwind.c: New file.
3565 * python/python-internal.h (pspy_get_name_unwinders): New prototype.
3566 (objpy_get_frame_unwinders): New prototype.
3567 (gdbpy_initialize_unwind): New prototype.
3568 * python/python.c (gdbpy_apply_type_printers): Call
3569 gdbpy_initialize_unwind.
3571 2015-04-01 Pedro Alves <palves@redhat.com>
3573 * infrun.c (resume): Check currently_stepping after clearing
3574 stepped_breakpoint, not before.
3576 2015-04-01 Pedro Alves <palves@redhat.com>
3578 * infrun.c (print_target_wait_results): Print all the ptid
3581 2015-04-01 Pedro Alves <palves@redhat.com>
3583 * infrun.c (keep_going): Also discard cleanups if inserting
3586 2015-04-01 Pedro Alves <palves@redhat.com>
3588 * infrun.c (wait_for_inferior): Install the
3589 finish_thread_state_cleanup cleanup across the whole function, not
3590 just around handle_inferior_event.
3592 2015-04-01 Pedro Alves <palves@redhat.com>
3594 * infrun.c (resume) <step past permanent breakpoint>: Use
3597 2015-04-01 Pedro Alves <palves@redhat.com>
3599 * linux-nat.c (linux_handle_extended_wait): Always call set_running.
3601 2015-04-01 Pierre-Marie de Rodat <derodat@adacore.com>
3603 * MAINTAINERS (Write After Approval): Add "Pierre-Marie de Rodat".
3605 2015-04-01 Pedro Alves <palves@redhat.com>
3607 * linux-thread-db.c (record_thread): Readd the thread to gdb's
3608 list if it was marked exited.
3610 2015-04-01 H.J. Lu <hongjiu.lu@intel.com>
3612 * configure: Regenerated.
3614 2015-03-31 Sergio Durigan Junior <sergiodj@redhat.com>
3615 Jan Kratochvil <jan.kratochvil@redhat.com>
3616 Oleg Nesterov <oleg@redhat.com>
3619 * linux-tdep.c: Include 'gdbcmd.h' and 'gdb_regex.h'.
3620 New enum identifying the various options of the coredump_filter
3622 (struct smaps_vmflags): New struct.
3623 (use_coredump_filter): New variable.
3624 (decode_vmflags): New function.
3625 (mapping_is_anonymous_p): Likewise.
3626 (dump_mapping_p): Likewise.
3627 (linux_find_memory_regions_full): New variables
3628 'coredumpfilter_name', 'coredumpfilterdata', 'pid', 'filterflags'.
3629 Removed variable 'modified'. Read /proc/<PID>/smaps file; improve
3630 parsing of its information. Implement memory mapping filtering
3631 based on its contents.
3632 (show_use_coredump_filter): New function.
3633 (_initialize_linux_tdep): New command 'set use-coredump-filter'.
3634 * NEWS: Mention the possibility of using the
3635 '/proc/PID/coredump_filter' file when generating a corefile.
3636 Mention new command 'set use-coredump-filter'.
3638 2015-03-31 Sergio Durigan Junior <sergiodj@redhat.com>
3640 * solib-svr4.c (solib_svr4_r_ldsomap): Catch possible exception by
3641 read_memory_unsigned_integer.
3643 2015-03-31 H.J. Lu <hongjiu.lu@intel.com>
3645 * Makefile.in (ZLIB): New.
3646 (ZLIBINC): Likewise.
3647 (INTERNAL_CFLAGS_BASE): Add $(ZLIBINC).
3648 (CLIBS): Add $(ZLIB).
3649 * acinclude.m4: (GDB_AC_CHECK_BFD): Add $zlibdir to LDFLAGS.
3651 * gdb_bfd.c: Don't check HAVE_ZLIB_H to include <zlib.h>.
3652 * top.c (print_gdb_configuration): Remove --with-zlib and
3654 * config.in: Regenerated.
3655 * configure: Likewise.
3657 2015-03-31 Antoine Tremblay <antoine.tremblay@ericsson.com>
3659 * NEWS: Mention info os cpus support.
3660 * gdb/nat/linux-osdata.c (linux_xfer_osdata_cpus): New function.
3661 (struct osdata_type): Add cpus entry, reorder the entries in
3664 2015-03-31 Matthias Klose <doko@ubuntu.com>
3666 * compile/compile.c (compile_to_object): Allow triplets with or
3669 2015-03-30 Doug Evans <dje@google.com>
3672 * cp-namespace.c (cp_search_static_and_baseclasses): Always look for
3673 klass in VAR_DOMAIN.
3675 2015-03-30 Gary Benson <gbenson@redhat.com>
3677 * remote.c (remote_mourn_1): Remove function. Update all callers
3678 to use remote_mourn.
3679 (extended_remote_mourn_1): Remove function. Update all callers
3680 to use extended_remote_mourn.
3681 (extended_remote_attach_1): Remove function. Update all callers
3682 to use extended_remote_attach.
3684 2015-03-28 James Bowman <james.bowman@ftdichip.com>
3686 * Makefile.in (ALL_TARGET_OBS): Add ft32-tdep.o.
3687 (HFILES_NO_SRCDIR): Add ft32-tdep.h.
3688 (ALLDEPFILES): Add ft32-tdep.c.
3689 * configure.tgt: Add FT32 entry.
3690 * ft32-tdep.c: New file, FT32 target-dependent code.
3691 * ft32-tdep.h: New file, FT32 target-dependent code.
3693 2015-03-27 Jan Kratochvil <jan.kratochvil@redhat.com>
3696 2015-03-26 Jan Kratochvil <jan.kratochvil@redhat.com>
3698 * printcmd.c (print_command_1): Move expr variable scope.
3700 2015-03-27 Joel Brobecker <brobecker@adacore.com>
3702 * dtrace-probe.c (dtrace_process_dof_probe): Initialize expr to NULL.
3704 2015-03-27 Andrzej Kaczmarek <andrzej.kaczmarek@tieto.com>
3706 * gdb_bfd.c (gdb_bfd_section_index): Fix off-by-one for special
3709 2015-03-26 Joel Brobecker <brobecker@adacore.com>
3711 * dtrace-probe.c (dtrace_process_dof_probe): Contain any
3712 exception raised while parsing the probe arguments.
3713 Force parsing to be done using the C language parser.
3714 * expression.h (parse_expression_with_language): Declare.
3715 * parse.c (parse_expression_with_language): New function.
3717 2015-03-26 Jon Turney <jon.turney@dronecode.org.uk>
3719 * MAINTAINERS (Write After Approval): Add "Jon Turney".
3721 2015-03-26 Andy Wingo <wingo@igalia.com>
3724 * dwarf2read.c (struct partial_die_info): Add has_const_value
3726 (add_partial_symbol): Don't punt on symbols that have const_value
3728 (read_partial_die): Detect DW_AT_const_value.
3730 2015-03-26 Jan Kratochvil <jan.kratochvil@redhat.com>
3733 * printcmd.c (print_command_1): Move expr variable scope.
3735 2015-03-26 Jan Kratochvil <jan.kratochvil@redhat.com>
3738 * printcmd.c (validate_format): Make the parameter cmdname const.
3740 2015-03-26 Don Breazeal <donb@codesourcery.com>
3742 * remote.c (_initialize_remote): Update comment.
3744 2015-03-26 Pedro Alves <palves@redhat.com>
3745 Jon TURNEY <jon.turney@dronecode.org.uk>
3747 * coffread.c (coff_symfile_read): When constructing the name of an
3748 import stub symbol from import symbol for amd64, only skip the
3749 char after _imp_ if the target is underscored (like i386) and the
3750 char is indeed the target's leading char.
3752 2015-03-25 Pedro Alves <palves@redhat.com>
3754 * target.h <to_async>: Replace 'callback' and 'context' parameters
3755 with boolean 'enable' parameter.
3756 (target_async): Replace CALLBACK and CONTEXT parameters with
3757 boolean ENABLE parameter.
3758 * inf-loop.c (inferior_event_handler): Adjust.
3759 * linux-nat.c (linux_nat_attach, linux_nat_resume)
3760 (linux_nat_resume): Adjust.
3761 (async_client_callback, async_client_context): Delete.
3762 (handle_target_event): Call inferior_event_handler directly.
3763 (linux_nat_async): Replace 'callback' and 'context' parameters
3764 with boolean 'enable' parameter. Adjust. Remove references to
3765 async_client_callback and async_client_context.
3766 (linux_nat_close): Adjust.
3767 * record-btrace.c (record_btrace_async): Replace 'callback' and
3768 'context' parameters with boolean 'enable' parameter. Adjust.
3769 (record_btrace_resume): Adjust.
3770 * record-full.c (record_full_async): Replace 'callback' and
3771 'context' parameters with boolean 'enable' parameter. Adjust.
3772 (record_full_resume, record_full_core_resume): Adjust.
3773 * remote.c (struct remote_state) <async_client_callback,
3774 async_client_context>: Delete fields.
3775 (remote_start_remote, extended_remote_attach_1, remote_resume)
3776 (extended_remote_create_inferior): Adjust.
3777 (remote_async_serial_handler): Call inferior_event_handler
3779 (remote_async): Replace 'callback' and 'context' parameters with
3780 boolean 'enable' parameter. Adjust.
3781 * top.c (gdb_readline_wrapper_cleanup, gdb_readline_wrapper):
3783 * target-delegates.c: Regenerate.
3785 2015-03-25 Gary Benson <gbenson@redhat.com>
3786 Pedro Alves <palves@redhat.com>
3788 * target.c (fileio_ft_t): New typedef, define object vector.
3789 (fileio_fhandles): New static variable.
3790 (is_closed_fileio_fh): New macro.
3791 (lowest_closed_fd): New static variable.
3792 (acquire_fileio_fd): New function.
3793 (release_fileio_fd): Likewise.
3794 (fileio_fd_to_fh): New macro.
3795 (target_fileio_open): Wrap the file descriptor on success.
3796 (target_fileio_pwrite): Updated to use wrapped file descriptor.
3797 (target_fileio_pread): Likewise.
3798 (target_fileio_close): Likewise.
3800 2015-03-24 Pedro Alves <palves@redhat.com>
3802 * thread.c (thread_apply_all_command): Take exited threads into
3805 2015-03-24 Pedro Alves <palves@redhat.com>
3807 * infrun.c (resume, proceed): Mention
3808 switch_back_to_stepped_thread, not switch_back_to_stepping.
3810 2015-03-24 Pedro Alves <palves@redhat.com>
3812 * infrun.c (user_visible_resume_ptid): Rewrite going from
3813 most-locked to unlocked instead of the opposite. Move comment ...
3814 * infrun.h (user_visible_resume_ptid): ... here.
3816 2015-03-24 Pedro Alves <palves@redhat.com>
3818 * linux-nat.c (linux_nat_resume): Output debug logs before trying
3819 to resume the event lwp. Use the lwp's ptid instead of the passed
3820 in (maybe wildcard) ptid.
3821 (stop_wait_callback): Tweak debug log output.
3822 (check_stopped_by_breakpoint): Tweak debug log output. Also dump
3824 (linux_nat_filter_event): In debug output, distinguish a
3825 resume_stop SIGSTOP from a delayed SIGSTOP. Output debug logs
3826 before trying to resume the lwp.
3828 2015-03-24 Joel Brobecker <brobecker@adacore.com>
3830 * gdbtypes.h (struct dynamic_prop_list) <prop>: Remove
3831 pointer indirection.
3832 * gdbtypes.c (get_dyn_prop): Adjust, following change above.
3833 (add_dyn_prop, copy_dynamic_prop_list): Likewise.
3835 2015-03-24 Joel Brobecker <brobecker@adacore.com>
3837 * gdbtypes.h (enum dynamic_prop_node_kind) <DYN_PROP_DATA_LOCATION>:
3838 Renames DYN_ATTR_DATA_LOCATION.
3839 (TYPE_DATA_LOCATION): Use DYN_PROP_DATA_LOCATION instead of
3840 DYN_ATTR_DATA_LOCATION.
3841 * dwarf2read.c (set_die_type): Use DYN_PROP_DATA_LOCATION
3842 instead of DYN_ATTR_DATA_LOCATION.
3844 2015-03-24 Pedro Alves <palves@redhat.com>
3846 * breakpoint.c (until_break_command): Adjust call to proceed.
3847 * gdbthread.h (struct thread_control_state) <stepping_command>:
3849 * infcall.c (run_inferior_call): Adjust call to proceed.
3850 * infcmd.c (run_command_1, proceed_thread_callback, continue_1):
3851 Adjust calls to proceed.
3852 (set_step_frame): Set the current thread's step_start_function
3854 (step_once): Adjust calls to proceed.
3855 (jump_command, signal_command, until_next_command)
3856 (finish_backward, finish_forward, proceed_after_attach_callback)
3857 (attach_command_post_wait): Adjust calls to proceed.
3858 * infrun.c (proceed_after_vfork_done): Adjust call to proceed.
3859 (do_target_resume): New function, factored out from ...
3860 (resume): ... here. Remove 'step' parameter. Instead, check
3861 currently_stepping to determine whether the thread should be
3863 (proceed): Remove 'step' parameter and don't set the thread's
3864 step_start_function here. Adjust call to 'resume'.
3865 (handle_inferior_event): Adjust calls to 'resume'.
3866 (switch_back_to_stepped_thread): Use do_target_resume instead of
3868 (keep_going): Adjust calls to 'resume'.
3869 * infrun.h (proceed): Remove 'step' parameter.
3871 * windows-nat.c (do_initial_windows_stuff): Adjust call to
3873 * mi/mi-main.c (proceed_thread): Adjust call to 'proceed'.
3875 2015-03-24 Pedro Alves <palves@redhat.com>
3877 * gdbthread.h (struct thread_control_state) <stepping_command>:
3879 * infcmd.c (step_once): Pass step=1 to clear_proceed_status. Set
3880 the thread's stepping_command field.
3881 * infrun.c (resume): Check the thread's stepping_command flag to
3882 determine which threads should be resumed. Rename 'entry_step'
3884 (clear_proceed_status_thread): Clear 'stepping_command'.
3885 (schedlock_applies): Change parameter type to struct thread_info
3887 (find_thread_needs_step_over): Remove 'step' parameter. Adjust.
3888 (switch_back_to_stepped_thread): Adjust calls to
3889 'schedlock_applies'.
3890 (_initialize_infrun): Adjust "set scheduler-locking step" help.
3892 2015-03-24 Pedro Alves <palves@redhat.com>
3894 * infrun.c (step_start_function): Delete and ...
3895 * gdbthread.h (struct thread_control_state) <step_start_function>:
3896 ... now a field here.
3897 * infrun.c (clear_proceed_status_thread): Clear the thread's
3898 step_start_function.
3899 (proceed, process_event_stop_test, print_stop_event): Adjust.
3901 2015-03-24 Pedro Alves <palves@redhat.com>
3903 * infrun.c (proceed): No longer handle negative step.
3905 2015-03-24 Gary Benson <gbenson@redhat.com>
3907 * nat/x86-linux.h (x86_linux_new_thread): New declaration.
3908 (x86_linux_prepare_to_resume): Likewise.
3909 * x86-linux-nat.c (x86_linux_new_thread):
3910 Moved to nat/x86-linux.c.
3911 (x86_linux_prepare_to_resume): Likewise.
3912 * nat/x86-linux.c (x86_linux_new_thread): New function.
3913 (x86_linux_prepare_to_resume): Likewise.
3915 2015-03-24 Gary Benson <gbenson@redhat.com>
3917 * nat/x86-linux-dregs.h: New file.
3918 * nat/x86-linux-dregs.c: Likewise.
3919 * Makefile.in (HFILES_NO_SRCDIR): Add nat/x86-linux-dregs.h.
3920 (x86-linux-dregs.o): New rule.
3921 * config/i386/linux.mh (NATDEPFILES): Add x86-linux-dregs.o.
3922 * config/i386/linux64.mh (NATDEPFILES): Likewise.
3923 * x86-linux-nat.c: Include nat/x86-linux-dregs.h.
3924 (u_debugreg_offset): Moved to nat/x86-linux-dregs.c.
3925 (x86_linux_dr_get): Likewise.
3926 (x86_linux_dr_set): Likewise.
3927 (x86_linux_dr_get_addr): Likewise.
3928 (x86_linux_dr_get_control): Likewise.
3929 (x86_linux_dr_get_status): Likewise.
3930 (update_debug_registers_callback): Likewise.
3931 (x86_linux_dr_set_control): Likewise.
3932 (x86_linux_dr_set_addr): Likewise.
3933 (x86_linux_update_debug_registers): Likewise.
3935 2015-03-24 Gary Benson <gbenson@redhat.com>
3937 * x86-linux-nat.c (x86_linux_update_debug_registers):
3938 New function, factored out from...
3939 (x86_linux_prepare_to_resume): ...this.
3941 2015-03-24 Gary Benson <gbenson@redhat.com>
3943 * x86-linux-nat.c (x86_linux_dr_get): Update comments.
3944 (x86_linux_dr_set): Likewise.
3945 (x86_linux_dr_get_addr): Likewise.
3946 (x86_linux_dr_get_control): Likewise.
3947 (x86_linux_dr_get_status): Likewise.
3948 (update_debug_registers_callback): Likewise.
3949 (x86_linux_dr_set_control): Likewise.
3950 (x86_linux_dr_set_addr): Likewise.
3951 (x86_linux_prepare_to_resume): Likewise.
3952 (x86_linux_new_thread): Likewise.
3954 2015-03-24 Gary Benson <gbenson@redhat.com>
3956 * x86-linux-nat.c (x86_linux_dr_set_addr): Update assertion.
3957 (x86_linux_new_thread): Rename argument.
3959 2015-03-24 Gary Benson <gbenson@redhat.com>
3961 * nat/x86-linux.h: New file.
3962 * nat/x86-linux.c: Likewise.
3963 * Makefile.in (HFILES_NO_SRCDIR): Add nat/x86-linux.h.
3964 (x86-linux.o): New rule.
3965 * config/i386/linux.mh (NATDEPFILES): Add x86-linux.o.
3966 * config/i386/linux64.mh (NATDEPFILES): Likewise.
3967 * nat/linux-nat.h (struct arch_lwp_info): New forward declaration.
3968 (lwp_set_arch_private_info): New declaration.
3969 (lwp_arch_private_info): Likewise.
3970 * linux-nat.c (lwp_set_arch_private_info): New function.
3971 (lwp_arch_private_info): Likewise.
3972 * x86-linux-nat.c: Include nat/x86-linux.h.
3973 (arch_lwp_info): Removed structure.
3974 (update_debug_registers_callback):
3975 Use lwp_set_debug_registers_changed.
3976 (x86_linux_prepare_to_resume): Use lwp_debug_registers_changed
3977 and lwp_set_debug_registers_changed.
3978 (x86_linux_new_thread): Use lwp_set_debug_registers_changed.
3980 2015-03-24 Gary Benson <gbenson@redhat.com>
3982 * nat/linux-nat.h (ptid_of_lwp): New declaration.
3983 (lwp_is_stopped): Likewise.
3984 (lwp_stop_reason): Likewise.
3985 * linux-nat.c (ptid_of_lwp): New function.
3986 (lwp_is_stopped): Likewise.
3987 (lwp_is_stopped_by_watchpoint): Likewise.
3988 * x86-linux-nat.c (update_debug_registers_callback):
3990 (x86_linux_prepare_to_resume): Use ptid_of_lwp and
3993 2015-03-24 Gary Benson <gbenson@redhat.com>
3995 * linux-nat.h (linux_stop_lwp): Move declaration to...
3996 * nat/linux-nat.h (linux_stop_lwp): New declaration.
3998 2015-03-24 Gary Benson <gbenson@redhat.com>
4000 * linux-nat.h: Include nat/linux-nat.h.
4001 (iterate_over_lwps): Move declaration to nat/linux-nat.h.
4002 * nat/linux-nat.h (struct lwp_info): New forward declaration.
4003 (iterate_over_lwps_ftype): New typedef.
4004 (iterate_over_lwps): New declaration.
4005 * linux-nat.h (iterate_over_lwps): Update comment. Use
4006 iterate_over_lwps_ftype. Update callback return value check.
4008 2015-03-24 Gary Benson <gbenson@redhat.com>
4010 * x86-nat.h (x86_debug_reg_state): Move declaration to...
4011 * nat/x86-dregs.h (x86_debug_reg_state): New declaration.
4013 2015-03-24 Gary Benson <gbenson@redhat.com>
4015 * nat/linux-nat.h (current_lwp_ptid): New declaration.
4016 * linux-nat.c (current_lwp_ptid): New function.
4017 * x86-linux-nat.c: Include nat/linux-nat.h.
4018 (x86_linux_dr_get_addr): Use current_lwp_ptid.
4019 (x86_linux_dr_get_control): Likewise.
4020 (x86_linux_dr_get_status): Likewise.
4021 (x86_linux_dr_set_control): Likewise.
4022 (x86_linux_dr_set_addr): Likewise.
4024 2015-03-24 Antoine Tremblay <antoine.tremblay@ericsson.com>
4026 PR breakpoints/16466
4027 * breakpoint.c (create_breakpoint): Set thread on breakpoint struct.
4029 2015-03-23 Joel Brobecker <brobecker@adacore.com>
4031 * ser-mingw.c (ser_windows_setparity): Fix indentation.
4032 * ser-unix.c (hardwire_setparity): Likewise.
4034 2015-03-23 Yurij Grechishhev <yurij.grechishhev@gmail.com>
4036 * NEWS: Mention set/show serial parity command.
4037 * monitor.c (monitor_open): Call serial_setparity.
4038 * remote.c (remote_open_1): Likewise.
4039 * ser-base.c (ser_base_serparity): New function.
4040 * ser-base.h (ser_base_setparity): Add declaration.
4041 * ser-go32.c (dos_ops): Set "setparity" field.
4042 * ser-mingw.c (ser_windows_raw): Do not set state.fParity and
4044 (ser_windows_setparity): New function.
4045 (hardwire_ops): Add ser_windows_setparity.
4046 (tty_ops): Add NULL for setparity field.
4047 (pipe_ops): Add ser_base_setparity.
4048 (tcp_ops): Likewise.
4049 * ser-pipe.c (pipe_ops): Likewise.
4050 * ser-tcp.c (tcp_ops): Likewise.
4051 * ser-unix.c (hardwire_setparity): Add declaration.
4052 (hardwire_raw): Don't reset PARENB flag.
4053 (hardwire_setparity): New function.
4054 (hardwire_ops): Add hardwire_setparity.
4055 * serial.c (serial_setparity): New function.
4056 (serial_parity): New global.
4057 (parity_none, parity_odd, parity_even, parity_enums, parity):
4059 (set_parity): New function.
4060 (_initialize_serial): Add set/show serial parity commands.
4061 * serial.h (GDBPARITY_NONE): Define.
4062 (GDBPARITY_ODD): Define.
4063 (GDBPARITY_EVEN): Define.
4064 (serial_setparity) Add declaration.
4065 (struct serial_ops): Add setparity field.
4066 * target.h (serial_parity): Add declaration.
4068 2015-03-23 Keith Seitz <keiths@redhat.com>
4070 * linespec.c (linespec_lexer_lex_keyword): Update comment.
4072 2015-03-23 Keith Seitz <keiths@redhat.com>
4074 * breakpoint.c (parse_breakpoint_sals): Use
4075 linespec_lexer_lex_keyword to ascertain if the user specified
4077 * linespec.c [IF_KEYWORD_INDEX]: Define.
4078 (linespec_lexer_lex_keyword): Export.
4079 (struct ls_parser) <keyword_ok>: Remove.
4080 A keyword is only a keyword if not followed by another keyword.
4081 (linespec_lexer_lex_one): Remove keyword_ok handling.
4082 Add comment explaining why the parsing stream is not advanced
4083 when a keyword is seen.
4084 (parse_linespec): Remove parser->keyword_ok.
4085 * linespec.h (linespec_lexer_lex_keyword): Add declaration.
4087 2015-03-23 Keith Seitz <keiths@redhat.com>
4090 * dwarf2read.c (dwarf2_add_member_fn): Issue a complaint
4091 if we find a static method with DW_AT_vtable_elem_location.
4093 2015-03-21 Eli Zaretskii <eliz@gnu.org>
4095 * tui/tui-io.c (tui_expand_tabs): Reinitialize the column counter
4096 before the second loop, to avoid undefined behavior. Reported by
4097 Anton Blanchard <anton@samba.org>.
4099 2015-03-20 Keven Boell <keven.boell@intel.com>
4101 * gdbtypes.c (resolve_dynamic_type_internal): Adapt
4102 data_location usage to linked list.
4103 (resolve_dynamic_type_internal): Adapt data_location to
4105 (get_dyn_prop, add_dyn_prop, copy_dynamic_prop_list): New function.
4106 (copy_type_recursive, copy_type): Add copy of linked list.
4107 * gdbtypes.h (enum dynamic_prop_node_kind): New enum.
4108 (struct dynamic_prop_list): New struct.
4109 * dwarf2read.c (set_die_type): Set data_location data.
4111 2015-03-20 Pedro Alves <palves@redhat.com>
4113 * i386-sol2-tdep.c (i386_sol2_static_transform_name): Move "p" to
4114 inner block and make it const.
4115 * machoread.c (get_archive_prefix_len): Make "lparen" const.
4117 2015-03-20 Pedro Alves <palves@redhat.com>
4119 * breakpoint.c (set_breakpoint_condition): Make argument "exp" const.
4120 * breakpoint.h (set_breakpoint_condition): Update declaration.
4122 2015-03-20 Pedro Alves <palves@redhat.com>
4124 * tui/tui-io.c (tui_expand_tabs): Make "s1" const.
4126 2015-03-20 Pedro Alves <palves@redhat.com>
4128 * xcoffread.c (scan_xcoff_symtab): Make "p" and "q" const.
4130 2015-03-20 Pedro Alves <palves@redhat.com>
4132 * remote-m32r-sdi.c (m32r_open): Make "port_str" const.
4134 2015-03-20 Pedro Alves <palves@redhat.com>
4136 * nto-tdep.c (nto_find_and_open_solib): Make "endian" const.
4137 (nto_init_solib_absolute_prefix): Likewise.
4139 2015-03-20 Pedro Alves <palves@redhat.com>
4141 * sparc-sol2-tdep.c (sparc_sol2_static_transform_name): Make "p" const.
4142 * spu-tdep.c (spu_gdbarch_init): Make "name" const.
4144 2015-03-20 Jan Kratochvil <jan.kratochvil@redhat.com>
4146 * config/djgpp/README: Remove gdb.hp.
4148 2015-03-20 Yao Qi <yao.qi@linaro.org>
4150 * aarch64-tdep.c (aarch64_gdbarch_init): Don't call
4151 set_gdbarch_cannot_step_breakpoint.
4153 2015-03-19 Pedro Alves <palves@redhat.com>
4155 * linux-nat.c (linux_resume_one_lwp): Rename to ...
4156 (linux_resume_one_lwp_throw): ... this. Don't handle ESRCH here,
4157 instead call perror_with_name.
4158 (check_ptrace_stopped_lwp_gone): New function.
4159 (linux_resume_one_lwp): Reimplement as wrapper around
4160 linux_resume_one_lwp_throw that swallows errors if the LWP is
4162 (resume_stopped_resumed_lwps): Try register reads in TRY/CATCH and
4163 swallows errors if the LWP is gone. Use
4164 linux_resume_one_lwp_throw instead of linux_resume_one_lwp.
4166 2015-03-19 Pedro Alves <palves@redhat.com>
4168 * linux-nat.c (status_callback): Return early if the LWP has no
4171 2015-03-19 Pedro Alves <palves@redhat.com>
4173 * linux-nat.c (select_event_lwp_callback): Update comment to no
4174 longer mention SIGTRAP.
4176 2015-03-18 Tristan Gingold <gingold@adacore.com>
4178 * amd64-windows-tdep.c (amd64_windows_find_unwind_info): Move
4179 redirection code to ...
4180 (amd64_windows_frame_decode_insns): ... Here. Fix in prologue
4181 checks. Fix SAVE_NONVOL operations. Add debug code and comments.
4183 2015-03-18 Gary Benson <gbenson@redhat.com>
4185 (remote_protocol_features): Remove the "vFile:fstat" feature.
4186 (remote_hostio_fstat): Probe for "vFile:fstat" support.
4188 2015-03-11 Yao Qi <yao.qi@linaro.org>
4191 * aarch64-linux-tdep.c: Include xml-syscall.h
4192 (aarch64_linux_get_syscall_number): New function.
4193 (aarch64_linux_init_abi): Call
4194 set_gdbarch_get_syscall_number.
4195 * syscalls/aarch64-linux.xml: New file.
4197 2015-03-17 Yurij Grechishhev <yurij.grechishhev@gmail.com>
4199 * ser-base.h (ser_base_setstopbits): Change second argument name
4200 from "rate" to "num".
4202 2015-03-17 Gary Benson <gbenson@redhat.com>
4203 Luke Allardyce <lukeallardyce@gmail.com>
4206 * common/common-remote-fileio.h (sys/stat.h): New include.
4207 (stuct stat): Remove forward declaration.
4209 2015-03-16 John Baldwin <jhb@FreeBSD.org>
4211 * fbsd-tdep.c (fbsd_make_corefile_notes): Fetch all target registers
4212 before writing core register notes.
4214 2015-03-16 Yuanhui Zhang <asmwarrior@gmail.com>
4215 Pedro Alves <palves@redhat.com>
4217 * gdb_curses.h (tgetnum): Mark with EXTERN_C.
4218 * stub-termcap.c (tgetent, tgetnum, tgetflag, tgetstr, tputs)
4219 (tgoto): Wrap with extern "C".
4221 2015-03-16 Pedro Alves <palves@redhat.com>
4222 Yuanhui Zhang <asmwarrior@gmail.com>
4224 * stub-termcap.c (tputs): Change prototype.
4226 2015-03-16 Yuanhui Zhang <asmwarrior@gmail.com>
4227 Pedro Alves <palves@redhat.com>
4229 * windows-nat.c (struct thread_info_struct): Rename to ...
4230 (struct windows_thread_info_struct): ... this.
4231 (thread_info): Rename to ...
4232 (windows_thread_info): ... this.
4235 2015-03-14 Jan Kratochvil <jan.kratochvil@redhat.com>
4236 Pedro Alves <palves@redhat.com>
4238 * NEWS: New Removed targets and native configurations.
4240 2015-03-13 Jan Kratochvil <jan.kratochvil@redhat.com>
4243 * Makefile.in (ALL_64_TARGET_OBS): Remove ia64-hpux-tdep.o.
4244 (ALL_TARGET_OBS): Remove hppa-hpux-tdep.o, solib-som.o and solib-pa64.o.
4245 (HFILES_NO_SRCDIR): Remove solib-som.h, inf-ttrace.h, solib-pa64.h and
4246 ia64-hpux-tdep.h, solib-ia64-hpux.h.
4247 (ALLDEPFILES): Remove hppa-hpux-tdep.c, hppa-hpux-nat.c,
4248 ia64-hpux-nat.c, ia64-hpux-tdep.c, somread.c and solib-som.c.
4249 * config/djgpp/fnchange.lst: Remove hppa-hpux-nat.c and
4251 * config/ia64/hpux.mh: Remove file.
4252 * config/pa/hpux.mh: Remove file.
4253 * configure: Rebuilt.
4254 * configure.ac (dlgetmodinfo, somread.o): Remove.
4255 * configure.host (hppa*-*-hpux*, ia64-*-hpux*): Make them obsolete.
4256 (ia64-*-hpux*): Remove its float format exception.
4257 * configure.tgt (hppa*-*-hpux*, ia64-*-hpux*): Make them obsolete.
4258 * hppa-hpux-nat.c: Remove file.
4259 * hppa-hpux-tdep.c: Remove file.
4260 * hppa-tdep.c (struct hppa_unwind_info, struct hppa_objfile_private):
4261 Move them here from hppa-tdep.h
4262 (hppa_objfile_priv_data, hppa_init_objfile_priv_data): Make it static.
4263 (hppa_frame_prev_register_helper): Remove HPPA_FLAGS_REGNUM exception.
4264 * hppa-tdep.h (struct hppa_unwind_info, struct hppa_objfile_private):
4265 Move them to hppa-tdep.c.
4266 (hppa_objfile_priv_data, hppa_init_objfile_priv_data): Remove
4268 * ia64-hpux-nat.c: Remove file.
4269 * ia64-hpux-tdep.c: Remove file.
4270 * ia64-hpux-tdep.h: Remove file.
4271 * inf-ttrace.c: Remove file.
4272 * inf-ttrace.h: Remove file.
4273 * solib-ia64-hpux.c: Remove file.
4274 * solib-ia64-hpux.h: Remove file.
4275 * solib-pa64.c: Remove file.
4276 * solib-pa64.h: Remove file.
4277 * solib-som.c: Remove file.
4278 * solib-som.h: Remove file.
4279 * somread.c: Remove file.
4281 2015-03-13 John Baldwin <jhb@FreeBSD.org>
4283 * configure.ac: AC_SEARCH_LIBS(kinfo_getvmmap, util).
4284 * config.in: Regenerate.
4285 * configure: Regenerate.
4286 * fbsd-nat.c [!HAVE_KINFO_GETVMMAP] (fbsd_read_mapping): Don't
4288 (fbsd_find_memory_regions): Use kinfo_getvmmap to
4289 enumerate memory regions if present.
4291 2015-03-13 John Baldwin <jhb@FreeBSD.org>
4293 * amd64fbsd-tdep.c (amd64fbsd_sigtramp_p): Style fixes.
4294 * i386fbsd-tdep.c: Fix style in various gdb_static_assert
4296 (i386fbsd_sigtramp_p): Likewise.
4298 2015-03-12 John Baldwin <jhb@FreeBSD.org>
4300 * MAINTAINERS (Write After Approval): Add John Baldwin.
4302 2015-03-12 Gary Benson <gbenson@redhat.com>
4304 * solib.c (_initialize_solib): Make "set/show sysroot" use
4305 add_setshow_optional_filename_cmd so it can be restored to
4306 empty after being set.
4308 2015-03-11 Sergio Durigan Junior <sergiodj@redhat.com>
4310 * Makefile.in (SFILES): New source break-catch-syscall.c.
4311 (COMMON_OBS): New object break-catch-syscall.o.
4312 * break-catch-syscall.c: New file.
4313 * breakpoint.c: Remove inclusion of "xml-syscall.h".
4314 (syscall_catchpoint_p): Move declaration to break-catch-syscall.c
4315 (struct syscall_catchpoint): Likewise.
4316 (dtor_catch_syscall): Likewise.
4317 (catch_syscall_inferior_data): Likewise.
4318 (struct catch_syscall_inferior_data): Likewise.
4319 (get_catch_syscall_inferior_data): Likewise.
4320 (catch_syscall_inferior_data_cleanup): Likewise.
4321 (insert_catch_syscall): Likewise.
4322 (remove_catch_syscall): Likewise.
4323 (breakpoint_hit_catch_syscall): Likewise.
4324 (print_it_catch_syscall): Likewise.
4325 (print_one_catch_syscall): Likewise.
4326 (print_mention_catch_syscall): Likewise.
4327 (print_recreate_catch_syscall): Likewise.
4328 (catch_syscall_breakpoint_ops): Likewise.
4329 (syscall_catchpoint_p): Likewise.
4330 (create_syscall_event_catchpoint): Likewise.
4331 (catch_syscall_split_args): Likewise.
4332 (catch_syscall_command_1): Likewise.
4333 (is_syscall_catchpoint_enabled): Likewise.
4334 (catch_syscall_enabled): Likewise.
4335 (catching_syscall_number): Likewise.
4336 (catch_syscall_completer): Likewise.
4337 (clear_syscall_counts): Likewise.
4338 (initialize_breakpoint_ops): Move initialization of syscall
4339 catchpoints to break-catch-syscall.c.
4340 (_initialize_breakpoint): Move code related to syscall catchpoints
4341 to break-catch-syscall.c.
4343 2015-03-11 Sergio Durigan Junior <sergiodj@redhat.com>
4345 * breakpoint.c (breakpoint_find_if): New function.
4346 * breakpoint.h (breakpoint_find_if): New prototype.
4348 2015-03-11 Gary Benson <gbenson@redhat.com>
4350 * remote-fileio.h (remote_fileio_to_host_stat): New declaration.
4351 * remote-fileio.c (remote_fileio_to_host_uint): New function.
4352 (remote_fileio_to_host_ulong): Likewise.
4353 (remote_fileio_to_host_mode): Likewise.
4354 (remote_fileio_to_host_time): Likewise.
4355 (remote_fileio_to_host_stat): Likewise.
4356 * remote.c (PACKET_vFile_fstat): New enum value.
4357 (remote_protocol_features): Register the "vFile:fstat" feature.
4358 (remote_hostio_fstat): New function.
4359 (remote_bfd_iovec_stat): Use the above.
4360 (_initialize_remote): Register new "set/show remote
4361 hostio-fstat-packet" command.
4362 * symfile.c (separate_debug_file_exists): Update comment.
4363 * NEWS: Announce new vFile:fstat packet.
4365 2015-03-11 Gary Benson <gbenson@redhat.com>
4367 * common/common-remote-fileio.h: New file.
4368 * common/common-remote-fileio.c: Likewise.
4369 * Makefile.in (SFILES): Add common/common-remote-fileio.c.
4370 (HFILES_NO_SRCDIR): Add common/common-remote-fileio.h.
4371 (COMMON_OBS): Add common-remote-fileio.o.
4372 (common-remote-fileio.o): New rule.
4373 * remote-fileio.h (common-remote-fileio.h): New include.
4374 * remote-fileio.c (gdb/fileio.h): Do not include.
4375 (remote_fileio_to_be): Moved to common-remote-fileio.h.
4376 (remote_fileio_to_fio_uint): Likewise.
4377 (remote_fileio_to_fio_time): Likewise.
4378 (remote_fileio_mode_to_target): Moved to common-remote-fileio.c.
4379 (remote_fileio_to_fio_mode): Likewise.
4380 (remote_fileio_to_fio_ulong): Likewise.
4381 (remote_fileio_to_fio_stat): Likewise.
4383 2015-03-11 Andy Wingo <wingo@igalia.com>
4385 * guile/scm-value.c (gdbscm_value_dynamic_type): Fix typo in which
4386 we were checking the cached type, not the cached dynamic type.
4388 2015-03-11 Andy Wingo <wingo@igalia.com>
4390 * guile/scm-cmd.c (cmdscm_destroyer): Don't xfree the name and
4391 other strings, as these are on the GC'd heap, and will be
4392 collected along with the smob.
4394 2015-03-11 Andy Wingo <wingo@igalia.com>
4396 * guile/scm-objfile.c (gdbscm_objfile_progspace): New function.
4397 (objfile_functions): Bind gdbscm_objfile_progspace to
4399 * guile/lib/gdb.scm: Add objfile-progspace to exports.
4401 2015-03-11 Andy Wingo <wingo@igalia.com>
4403 * guile/guile.c (_initialize_guile): Disable automatic
4404 finalization, if Guile offers us that possibility.
4405 * guile/guile.c (call_initialize_gdb_module):
4406 * guile/scm-safe-call.c (gdbscm_with_catch): Arrange to run
4407 finalizers in appropriate places.
4408 * configure.ac (AC_TRY_LIBGUILE): Add a check for
4409 scm_set_automatic_finalization_enabled.
4410 * configure: Regenerated.
4412 2015-03-11 Andreas Arnez <arnez@linux.vnet.ibm.com>
4414 * s390-linux-tdep.c (s390_skip_prologue): Skip the prologue using
4417 2015-03-11 Andreas Arnez <arnez@linux.vnet.ibm.com>
4419 * s390-linux-nat.c (struct arch_lwp_info): New.
4420 (s390_fix_watch_points): Rename to...
4421 (s390_prepare_to_resume): ...this. Skip the PER info update
4422 unless the watch points have changed.
4423 (s390_refresh_per_info, s390_new_thread): New functions.
4424 (s390_insert_watchpoint): Call s390_refresh_per_info instead of
4425 s390_fix_watch_points.
4426 (s390_remove_watchpoint): Likewise.
4427 (_initialize_s390_nat): Reflect renaming of s390_fix_watch_points.
4428 Register s390_prepare_to_resume.
4430 2015-03-09 Pedro Alves <palves@redhat.com>
4433 2015-03-07 Pedro Alves <palves@redhat.com>
4434 * common/gdb_socket.h: New file.
4435 * ser-tcp.c: Include gdb_socket.h. Don't include netinet/in.h nor
4437 (net_open): Use union gdb_sockaddr_u.
4439 2015-03-07 Pedro Alves <palves@redhat.com>
4441 * configure.ac (build_warnings): Move -Wmissing-prototypes
4442 -Wdeclaration-after-statement -Wmissing-parameter-type
4443 -Wold-style-declaration -Wold-style-definition to the C-specific
4445 * configure: Regenerate.
4447 2015-03-07 Pedro Alves <palves@redhat.com>
4449 * common/gdb_socket.h: New file.
4450 * ser-tcp.c: Include gdb_socket.h. Don't include netinet/in.h nor
4452 (net_open): Use union gdb_sockaddr_u.
4454 2015-03-07 Pedro Alves <palves@redhat.com>
4456 * common/common-exceptions.c [!__cplusplus] (enum catcher_state)
4457 (exceptions_state_mc_action_iter)
4458 (exceptions_state_mc_action_iter_1, exceptions_state_mc_catch):
4460 [__cplusplus] (try_scope_depth): New global.
4461 [__cplusplus] (exception_try_scope_entry)
4462 (exception_try_scope_exit, gdb_exception_sliced_copy)
4463 (exception_rethrow): New functions.
4464 (throw_exception): In C++ mode, throw
4465 gdb_exception_RETURN_MASK_QUIT for RETURN_QUIT and
4466 gdb_exception_RETURN_MASK_ERROR for RETURN_ERROR.
4467 (throw_it): In C++ mode, use try_scope_depth.
4468 * common/common-exceptions.h [!__cplusplus]
4469 (exceptions_state_mc_action_iter)
4470 (exceptions_state_mc_action_iter_1, exceptions_state_mc_catch):
4472 [__cplusplus] (exception_try_scope_entry)
4473 (exception_try_scope_exit, exception_rethrow): Declare.
4474 [__cplusplus] (struct exception_try_scope): New struct.
4475 [__cplusplus] (TRY, CATCH, END_CATCH): Reimplement on top of real
4477 (struct gdb_exception_RETURN_MASK_ALL)
4478 (struct gdb_exception_RETURN_MASK_ERROR)
4479 (struct gdb_exception_RETURN_MASK_QUIT): New types.
4481 2015-03-07 Pedro Alves <palves@redhat.com>
4483 * main.c (handle_command_errors): Remove volatile qualifier from
4486 2015-03-07 Pedro Alves <palves@redhat.com>
4488 * breakpoint.c (save_breakpoints): Adjust to avoid code between
4490 * gdbtypes.c (safe_parse_type): Remove empty line.
4491 (types_deeply_equal):
4492 * guile/scm-frame.c (gdbscm_frame_name):
4493 * linux-thread-db.c (find_new_threads_once):
4494 * python/py-breakpoint.c (bppy_get_commands):
4495 * record-btrace.c (record_btrace_insert_breakpoint)
4496 (record_btrace_remove_breakpoint, record_btrace_start_replaying)
4497 (record_btrace_start_replaying): Adjust to avoid code between TRY
4500 2015-03-07 Pedro Alves <palves@redhat.com>
4502 * common/common-exceptions.c (struct catcher) <exception>: No
4503 longer a pointer to volatile exception. Now an exception value.
4504 <mask>: Delete field.
4505 (exceptions_state_mc_init): Remove all parameters. Adjust.
4506 (exceptions_state_mc): No longer pop the catcher here.
4507 (exceptions_state_mc_catch): New function.
4508 (throw_exception): Adjust.
4509 * common/common-exceptions.h (exceptions_state_mc_init): Remove
4511 (exceptions_state_mc_catch): Declare.
4512 (TRY_CATCH): Rename to ...
4513 (TRY): ... this. Remove EXCEPTION and MASK parameters.
4514 (CATCH, END_CATCH): New.
4515 All callers adjusted.
4517 2015-03-07 Tom Tromey <tromey@redhat.com>
4519 * top.c (quit_force): Inline and delete DO_TRY, DO_PRINT_EX.
4521 2015-03-07 Pedro Alves <palves@redhat.com>
4523 * amd64-tdep.c (amd64_frame_cache, amd64_sigtramp_frame_cache)
4524 (amd64_epilogue_frame_cache): Normal exception handling code.
4525 * break-catch-throw.c (check_status_exception_catchpoint)
4526 (re_set_exception_catchpoint): Ditto.
4527 * cli/cli-interp.c (safe_execute_command):
4528 * cli/cli-script.c (script_from_file): Ditto.
4529 * compile/compile-c-symbols.c (generate_c_for_for_one_variable):
4531 * compile/compile-object-run.c (compile_object_run): Ditto.
4532 * cp-abi.c (baseclass_offset): Ditto.
4533 * cp-valprint.c (cp_print_value): Ditto.
4534 * exceptions.c (catch_exceptions_with_msg):
4535 * frame-unwind.c (frame_unwind_try_unwinder): Ditto.
4536 * frame.c (get_frame_address_in_block_if_available): Ditto.
4537 * i386-tdep.c (i386_frame_cache, i386_epilogue_frame_cache)
4538 (i386_sigtramp_frame_cache): Ditto.
4539 * infcmd.c (post_create_inferior): Ditto.
4540 * linespec.c (parse_linespec, find_linespec_symbols):
4541 * p-valprint.c (pascal_object_print_value): Ditto.
4542 * parse.c (parse_expression_for_completion): Ditto.
4543 * python/py-finishbreakpoint.c (bpfinishpy_init): Ditto.
4544 * remote.c (remote_get_noisy_reply): Ditto.
4545 * s390-linux-tdep.c (s390_frame_unwind_cache): Ditto.
4546 * solib-svr4.c (solib_svr4_r_map): Ditto.
4548 2015-03-06 Gary Benson <gbenson@redhat.com>
4550 * common/common-utils.h (startswith): New inline function.
4551 All places where this logic was used updated to use the above.
4553 2015-03-05 Pedro Alves <palves@redhat.com>
4556 * mem-break.c (default_memory_insert_breakpoint): Set shadow_len
4557 after reading the breakpoint's shadow memory.
4559 2015-03-05 Mark Kettenis <kettenis@gnu.org>
4561 * hppabsd-nat.c: Remove file.
4562 * hppaobsd-nat.c: New file.
4563 * Makefile.in (ALLDEPFILES): Remove hppabsd-nat.c. Add
4565 * config/pa/obsd.mh (NATDEPFILES): Replace hppabsd-nat.o with
4568 2015-03-04 Pedro Alves <palves@redhat.com>
4570 * target.h (struct target_ops) <to_decr_pc_after_break>: Delete.
4571 (target_decr_pc_after_break): Delete declaration.
4572 * target.c (default_target_decr_pc_after_break)
4573 (target_decr_pc_after_break): Delete.
4574 * linux-nat.c (check_stopped_by_breakpoint, linux_nat_wait_1): Use
4575 gdbarch_decr_pc_after_break instead of target_decr_pc_after_break.
4576 * linux-thread-db.c (check_event): Likewise.
4577 * infrun.c (adjust_pc_after_break): Likewise.
4578 * darwin-nat.c (cancel_breakpoint): Likewise.
4579 * aix-thread.c (aix_thread_wait): Likewise.
4580 * target-delegates.c: Regenerate.
4582 2015-03-04 Pedro Alves <palves@redhat.com>
4584 * linux-nat.c (save_sigtrap): Check for breakpoints before
4585 checking watchpoints.
4586 (status_callback) [USE_SIGTRAP_SIGINFO]: Don't check whether a
4587 breakpoint is inserted if relying on SIGTRAP's siginfo.si_code.
4588 (check_stopped_by_breakpoint) [USE_SIGTRAP_SIGINFO]: Decide whether
4589 a breakpoint triggered based on the SIGTRAP's siginfo.si_code.
4590 (linux_nat_stopped_by_sw_breakpoint)
4591 (linux_nat_supports_stopped_by_sw_breakpoint)
4592 (linux_nat_stopped_by_hw_breakpoint)
4593 (linux_nat_supports_stopped_by_hw_breakpoint): New functions.
4594 (linux_nat_wait_1): Don't re-increment the PC if relying on
4595 SIGTRAP's siginfo->si_code.
4596 (linux_nat_add_target): Install new target methods.
4597 * linux-thread-db.c (check_event): Don't account for breakpoint PC
4598 offset if the target already adjusted the PC.
4599 * nat/linux-ptrace.h (USE_SIGTRAP_SIGINFO): New.
4600 (GDB_ARCH_TRAP_BRKPT): New.
4601 (TRAP_HWBKPT): Define if not already defined.
4603 2015-03-04 Pedro Alves <palves@redhat.com>
4605 * NEWS: Mention the new "swbreak" and "hwbreak" stop reasons.
4606 * remote.c (struct remote_state) <remote_stopped_by_watchpoint_p>:
4608 <stop_reason>: New field.
4609 (PACKET_swbreak_feature, PACKET_hwbreak_feature): New enum values.
4610 (packet_set_cmd_state): New function.
4611 (remote_protocol_features): Register the "swbreak" and "hwbreak"
4613 (remote_query_supported): If not disabled with the corresponding
4614 "set remote foo-packet" command, report support for the swbreak
4615 and hwbreak features.
4616 (struct stop_reply) <remote_stopped_by_watchpoint_p>: Delete
4618 <stop_reason>: New field.
4619 (remote_parse_stop_reply): Handle "swbreak" and "hwbreak".
4620 (remote_wait_as): Adjust.
4621 (remote_stopped_by_sw_breakpoint)
4622 (remote_supports_stopped_by_sw_breakpoint)
4623 (remote_stopped_by_hw_breakpoint)
4624 (remote_supports_stopped_by_hw_breakpoint): New functions.
4625 (remote_stopped_by_watchpoint): New function.
4626 (init_remote_ops): Install them.
4627 (_initialize_remote): Register new "set/show remote
4628 swbreak-feature-packet" and "set/show remote
4629 swbreak-feature-packet" commands.
4631 2015-03-04 Pedro Alves <palves@redhat.com>
4633 * btrace.h: Include target/waitstatus.h.
4634 (struct btrace_thread_info) <stop_reason>: New field.
4635 * record-btrace.c (record_btrace_step_thread): Use
4636 record_check_stopped_by_breakpoint instead of breakpoint_here_p.
4637 (record_btrace_decr_pc_after_break): Delete.
4638 (record_btrace_stopped_by_sw_breakpoint)
4639 (record_btrace_supports_stopped_by_sw_breakpoint)
4640 (record_btrace_stopped_by_hw_breakpoint)
4641 (record_btrace_supports_stopped_by_hw_breakpoint): New functions.
4642 (init_record_btrace_ops): Install them.
4643 * record-full.c (record_full_hw_watchpoint): Delete and replace
4645 (record_full_stop_reason): ... this throughout.
4646 (record_full_exec_insn): Adjust.
4647 (record_full_wait_1): Adjust. No longer re-increment the PC.
4648 (record_full_wait_1): Adjust. Use
4649 record_check_stopped_by_breakpoint instead of breakpoint_here_p.
4650 (record_full_stopped_by_watchpoint): Adjust.
4651 (record_full_stopped_by_sw_breakpoint)
4652 (record_full_supports_stopped_by_sw_breakpoint)
4653 (record_full_supports_stopped_by_sw_breakpoint)
4654 (record_full_stopped_by_hw_breakpoint)
4655 (record_full_supports_stopped_by_hw_breakpoint): New functions.
4656 (init_record_full_ops, init_record_full_core_ops): Install them.
4657 * record.c (record_check_stopped_by_breakpoint): New function.
4658 * record.h: Include target/waitstatus.h.
4659 (record_check_stopped_by_breakpoint): New declaration.
4661 2015-03-04 Pedro Alves <palves@redhat.com>
4663 enum lwp_stop_reason -> enum target_stop_reason
4664 * linux-nat.c (linux_resume_one_lwp, check_stopped_by_watchpoint)
4665 (linux_nat_stopped_by_watchpoint, status_callback)
4666 (linux_nat_wait_1): Adjust.
4667 * linux-nat.h (enum lwp_stop_reason): Delete.
4668 (struct lwp_info) <stop_reason>: Now an enum target_stop_reason.
4669 * x86-linux-nat.c (x86_linux_prepare_to_resume): Adjust.
4670 * target/waitstatus.h (enum target_stop_reason): New.
4672 2015-03-04 Pedro Alves <palves@redhat.com>
4674 * breakpoint.c (need_moribund_for_location_type): New function.
4675 (bpstat_stop_status): Don't skipping checking moribund locations
4676 of breakpoint types which the target tell caused a stop.
4677 (program_breakpoint_here_p): New function, factored out from ...
4678 (bp_loc_is_permanent): ... this.
4679 (update_global_location_list): Don't create a moribund location if
4680 the target supports reporting stops of the type of the removed
4682 * breakpoint.h (program_breakpoint_here_p): New declaration.
4683 * infrun.c (adjust_pc_after_break): Return early if the target has
4684 already adjusted the PC. Add comments.
4685 (handle_signal_stop): If nothing explains a signal, and the target
4686 tells us the stop was caused by a software breakpoint, check if
4687 there's a breakpoint instruction in the memory. If so, adjust the
4688 PC before presenting the stop to the user. Otherwise, ignore the
4689 trap. If nothing explains a signal, and the target tells us the
4690 stop was caused by a hardware breakpoint, ignore the trap.
4691 * target.h (struct target_ops) <to_stopped_by_sw_breakpoint,
4692 to_supports_stopped_by_sw_breakpoint, to_stopped_by_hw_breakpoint,
4693 to_supports_stopped_by_hw_breakpoint>: New fields.
4694 (target_stopped_by_sw_breakpoint)
4695 (target_supports_stopped_by_sw_breakpoint)
4696 (target_stopped_by_hw_breakpoint)
4697 (target_supports_stopped_by_hw_breakpoint): Define.
4698 * target-delegates.c: Regenerate.
4700 2015-03-04 Pedro Alves <palves@redhat.com>
4702 * infrun.c (follow_fork_inferior): Use the whole of the
4703 inferior_ptid and pending_follow.related_pid ptids instead of
4704 building ptids from the process components. Adjust verbose output
4705 to use target_pid_to_str.
4706 * linux-nat.c (linux_child_follow_fork): Use the whole of the
4707 inferior_ptid and pending_follow.related_pid ptids instead of
4708 building ptids from the process components.
4710 2015-03-04 Mark Kettenis <kettenis@gnu.org>
4712 * inf-ptrace.c [PT_GET_PROCESS_STATE]
4713 (inf_ptrace_insert_fork_catchpoint): New function.
4714 (inf_ptrace_remove_fork_catchpoint): New function.
4715 (inf_ptrace_target) [PT_GET_PROCESS_STATE]: Install them.
4717 2015-03-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
4719 * s390-linux-tdep.c (s390_register_name): Return empty string
4720 instead of NULL for registers that shouldn't be visible.
4722 2015-03-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
4724 * s390-linux-tdep.c (s390_gdbarch_init): Use the correct syscall
4725 XML file for 64-bit targets.
4727 2015-03-03 Simon Marchi <simon.marchi@ericsson.com>
4729 * target.h (find_default_create_inferior): Remove declaration.
4730 (find_default_attach): Likewise.
4732 2015-03-03 Pedro Alves <palves@redhat.com>
4734 * inf-ptrace.c (inf_ptrace_resume): Remove spurious whitespace.
4735 Use ptid_get_pid to get the overall process id when resuming all
4738 2015-03-03 Pedro Alves <palves@redhat.com>
4740 * i386-linux-nat.c (i386_linux_resume): Get the ptrace PID out of
4741 the lwp field of ptid. Pass the full ptid to get_thread_regcache.
4742 * inf-ptrace.c (get_ptrace_pid): New function.
4743 (inf_ptrace_resume): Use it.
4744 * linux-nat.c (linux_resume_one_lwp): Pass the LWP's ptid ummodified
4747 2015-03-03 Markus Metzger <markus.t.metzger@intel.com>
4749 * nat/linux-btrace.c: Include sys/utsname.h.
4750 (linux_determine_kernel_ptr_bits): New.
4751 (linux_enable_bts): Call linux_determine_kernel_ptr_bits.
4752 * x86-linux-nat.c (x86_linux_enable_btrace): Do not overwrite non-zero
4755 2015-03-03 Markus Metzger <markus.t.metzger@intel.com>
4757 * btrace.c (ftrace_update_function): Treat return as tailcall for
4758 "_dl_runtime_resolve".
4760 2015-03-03 Markus Metzger <markus.t.metzger@intel.com>
4762 * btrace.h (btrace_function) <lbegin, lend>: Remove.
4763 * btrace.c (ftrace_debug): Do not print the line range.
4764 (ftrace_skip_file, ftrace_update_lines): Remove.
4765 (ftrace_new_function): Remove lbegin and lend initialization.
4766 (btrace_compute_ftrace_bts): Remove call to ftrace_update_lines.
4767 * record-btrace.c (btrace_compute_src_line_range): New.
4768 (btrace_call_history_src_line): Call btrace_compute_src_line_range.
4770 2015-03-02 Pedro Alves <palves@redhat.com>
4772 * infrun.c (follow_exec): Delete all threads of the process except
4773 the event thread. Extended comments.
4775 2015-03-02 Joel Brobecker <brobecker@adacore.com>
4777 * contrib/ari/gdb_ari.sh: Reinstate checks for "true" and "false".
4779 2015-03-02 Joel Brobecker <brobecker@adacore.com>
4781 * utils.h: Remove <stdbool.h> #include.
4782 (producer_is_gcc): Change return type to "int".
4783 * utils.c (producer_is_gcc): Change return type to int.
4784 Return 1 instead of true, and 0 instead of false.
4785 Adjust function documentation accordingly.
4787 2015-03-02 Andreas Arnez <arnez@linux.vnet.ibm.com>
4789 * s390-linux-nat.c (have_regset_vxrs): New static variable.
4790 (s390_linux_fetch_inferior_registers): Handle vector registers, if
4792 (s390_linux_store_inferior_registers): Likewise.
4793 (s390_get_hwcap): Remove function. Embed its logic...
4794 (s390_read_description): ...here. Yield a target description with
4795 vector registers if applicable.
4796 * s390-linux-tdep.c: Include "features/s390-vx-linux64.c",
4797 "features/s390-tevx-linux64.c", "features/s390x-vx-linux64.c", and
4798 "features/s390x-tevx-linux64.c".
4799 (struct gdbarch_tdep) <v0_full_regnum>: New field.
4800 (s390_dwarf_regmap): Add vector registers. Remove bogus entries
4801 for "GNU/Linux-specific registers".
4802 (s390_dwarf_reg_r0l): New enum value.
4803 (s390_dwarf_reg_to_regnum): Support vector registers.
4804 (s390_adjust_frame_regnum): Adjust pseudo DWARF register numbers
4805 of GPR lower halves.
4806 (regnum_is_vxr_full): New function.
4807 (s390_register_name): New function.
4808 (s390_pseudo_register_name): Handle v0-v15, which are composed of
4809 f0-f15 and v0l-v15l.
4810 (s390_pseudo_register_type): Likewise.
4811 (s390_pseudo_register_read): Likewise.
4812 (s390_pseudo_register_write): Likewise.
4813 (s390_value_from_register): Account for the fact that values are
4814 placed left-justified in vector registers.
4815 (s390_pseudo_register_reggroup_p): Add pseudo registers v0-v15 to
4816 the vector reggroup and omit them from the general reggroup.
4817 (s390_regmap_vxrs_low, s390_regmap_vxrs_high): New register maps.
4818 (s390_vxrs_low_regset, s390_vxrs_high_regset): New regsets.
4819 (s390_iterate_over_regset_sections): Add iterations for the two
4821 (s390_core_read_description): Yield a target description with
4822 vector registers if applicable.
4823 (s390_gdbarch_init): Handle target descriptions with vector
4824 registers. Add "register_name" gdbarch method.
4825 (_initialize_s390_tdep): Call new tdesc initialization functions.
4826 * s390-linux-tdep.h (HWCAP_S390_VX): New macro.
4827 (S390_V0_LOWER_REGNUM, S390_V1_LOWER_REGNUM, S390_V2_LOWER_REGNUM)
4828 (S390_V3_LOWER_REGNUM, S390_V4_LOWER_REGNUM, S390_V5_LOWER_REGNUM)
4829 (S390_V6_LOWER_REGNUM, S390_V7_LOWER_REGNUM, S390_V8_LOWER_REGNUM)
4830 (S390_V9_LOWER_REGNUM, S390_V10_LOWER_REGNUM)
4831 (S390_V11_LOWER_REGNUM, S390_V12_LOWER_REGNUM)
4832 (S390_V13_LOWER_REGNUM, S390_V14_LOWER_REGNUM)
4833 (S390_V15_LOWER_REGNUM, S390_V16_REGNUM, S390_V17_REGNUM)
4834 (S390_V18_REGNUM, S390_V19_REGNUM, S390_V20_REGNUM)
4835 (S390_V21_REGNUM, S390_V22_REGNUM, S390_V23_REGNUM)
4836 (S390_V24_REGNUM, S390_V25_REGNUM, S390_V26_REGNUM)
4837 (S390_V27_REGNUM, S390_V28_REGNUM, S390_V29_REGNUM)
4838 (S390_V30_REGNUM, S390_V31_REGNUM): New macros.
4839 (S390_NUM_REGS): Adjust value.
4840 (s390_vxrs_low_regset, s390_vxrs_high_regset): Declare.
4841 (tdesc_s390_vx_linux64, tdesc_s390_tevx_linux64)
4842 (tdesc_s390x_vx_linux64, tdesc_s390x_tevx_linux64): Likewise.
4843 * NEWS: Announce S/390 vector register support.
4845 2015-03-02 Andreas Arnez <arnez@linux.vnet.ibm.com>
4847 * features/s390-tevx-linux64.xml: New file.
4848 * features/s390-vx-linux64.xml: New file.
4849 * features/s390-vx.xml: New file.
4850 * features/s390x-tevx-linux64.xml: New file.
4851 * features/s390x-vx-linux64.xml: New file.
4852 * features/Makefile (WHICH): Add s390-vx-linux64,
4853 s390x-vx-linux64, s390-tevx-linux64, and s390x-tevx-linux64.
4854 (s390-vx-linux64-expedite, s390-tevx-linux64-expedite)
4855 (s390x-vx-linux64-expedite, s390x-tevx-linux64-expedite): New
4857 * features/s390-tevx-linux64.c: New generated file.
4858 * features/s390-vx-linux64.c: Likewise.
4859 * features/s390x-tevx-linux64.c: Likewise.
4860 * features/s390x-vx-linux64.c: Likewise.
4861 * regformats/s390-tevx-linux64.dat: Likewise.
4862 * regformats/s390-vx-linux64.dat: Likewise.
4863 * regformats/s390x-tevx-linux64.dat: Likewise.
4864 * regformats/s390x-vx-linux64.dat: Likewise.
4866 2015-02-28 Doug Evans <xdje42@gmail.com>
4868 * symtab.h (struct symtab) <next>: Fix comment.
4870 2015-02-27 Simon Marchi <simon.marchi@ericsson.com>
4872 * python/python.c (python_GdbModuleDef): Rename GdbMethods to
4875 2015-02-27 Pedro Alves <palves@redhat.com>
4877 * dtrace-probe.c (dtrace_probe_ops): Make extern.
4879 2015-02-27 Pedro Alves <palves@redhat.com>
4881 * common/common-exceptions.h (exception_none): Declare.
4882 * common/common-exceptions.c (exception_none): Moved from
4884 (exceptions_state_mc_init): Use exception_none.
4885 * exceptions.c (exception_none): Move to
4886 common/common-exceptions.c.
4887 * exceptions.h (exception_none): Move to
4888 common/common-exceptions.h.
4890 2015-02-27 Pedro Alves <palves@redhat.com>
4892 * main.c (catch_command_errors, catch_command_errors_const):
4893 Remove 'mask' argument. Adjust.
4894 (captured_main): Adjust callers.
4896 2015-02-27 Pedro Alves <palves@redhat.com>
4898 * python/python-internal.h: Include "extension-priv.h".
4900 2015-02-27 Pedro Alves <palves@redhat.com>
4902 * breakpoint.h (enum print_stop_action): Move further up in the
4905 2015-02-27 Pedro Alves <palves@redhat.com>
4907 * gdbarch.sh: Include regcache.h.
4908 * gdbarch.h: Regenerate.
4910 2015-02-27 Pedro Alves <palves@redhat.com>
4912 * arm-tdep.c (decode_insn) <arm_handle_insn, thumb_handle_insn>:
4913 Remove duplicate const.
4914 * sparc-sol2-tdep.c (sparc_sol2_static_transform_name): Remove
4917 2015-02-27 Pedro Alves <palves@redhat.com>
4919 * cp-valprint.c (vtbl_ptr_name): Use EXPORTED_CONST.
4920 * guile/guile.c (extension_language_guile): Use EXPORTED_CONST.
4921 * features/feature_to_c.sh: Tag the generated xml_builtin array
4922 with extern const in C++ mode.
4924 2015-02-27 Tom Tromey <tromey@redhat.com>
4926 * minidebug.c (struct lzma_stream): Rename to ...
4927 (struct gdb_lzma_stream): ... this.
4928 (lzma_open, lzma_pread, lzma_close, lzma_stat): Adjust.
4930 2015-02-27 Pedro Alves <palves@redhat.com>
4932 * mi/mi-cmd-stack.c (mi_apply_ext_lang_frame_filter): New
4934 (mi_cmd_stack_list_locals, mi_cmd_stack_list_args)
4935 (mi_cmd_stack_list_variables): Use it.
4937 2015-02-27 Pedro Alves <palves@redhat.com>
4939 * x86-linux-nat.c (u_debugreg_offset): New function.
4940 (x86_linux_dr_get, x86_linux_dr_set): Use it.
4942 2015-02-27 Pedro Alves <palves@redhat.com>
4944 * nat/x86-dregs.h (enum target_hw_bp_type): Remove forward
4946 Include break-common.h.
4948 2015-02-27 Tom Tromey <tromey@redhat.com>
4949 Pedro Alves <palves@redhat.com>
4951 * arm-tdep.c (set_fp_model_sfunc, arm_set_abi): Use 'int' for
4952 local used to iterate over enums.
4953 * completer.c (signal_completer): Likewise.
4954 * i386-tdep.c (i386_stap_parse_special_token): Likewise.
4955 * rs6000-tdep.c (powerpc_set_vector_abi): Likewise.
4956 * tui/tui-data.c (tui_next_win, tui_prev_win): Likewise.
4957 * tui/tui-layout.c (next_layout, prev_layout): Likewise.
4958 * tui/tui-win.c (tui_refresh_all_win, tui_rehighlight_all)
4959 (tui_resize_all, tui_set_focus_command, tui_all_windows_info): Likewise.
4960 * tui-wingeneral.c (tui_refresh_all): Likewise.
4962 2015-02-27 Pedro Alves <palves@redhat.com>
4964 * target.h: Include "infrun.h".
4966 2015-02-27 Pedro Alves <palves@redhat.com>
4968 * gdb_proc_service.h: Wrap with EXTERN_C_PUSH/EXTERN_C_POP.
4970 2015-02-27 Pedro Alves <palves@redhat.com>
4972 * common/agent.h (IPA_SYM_EXPORTED_NAME): New.
4974 * common/common-defs.h (EXTERN_C_PUSH, EXTERN_C_POP): New macros.
4976 2015-02-27 Pedro Alves <palves@redhat.com>
4978 * cli-out.c (_rl_erase_entire_line): Move declaration out of
4979 cli_mld_erase_entire_line, and make it extern "C".
4980 * common/common-defs.h (EXTERN_C): New.
4981 * completer.c (_rl_completion_prefix_display_length)
4982 (_rl_print_completions_horizontally, QSFUNC): Move declarations
4983 out of gdb_display_match_list_1.
4984 (_rl_qsort_string_compare): Move declaration out of
4985 gdb_display_match_list_1, and make it extern "C".
4986 * defs.h (re_comp): Use EXTERN_C.
4987 * maint.c (_mcleanup): Move declaration out of mcleanup_wrapper,
4988 and make it extern "C".
4989 (monstartup): Move declaration out of maintenance_set_profile_cmd,
4990 and make it extern "C".
4991 (main): Move declaration out of maintenance_set_profile_cmd.
4992 * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason_string): Use
4995 2015-02-27 Pedro Alves <palves@redhat.com>
4997 * python/python.c (GdbMethods): Rename to ...
4998 (python_GdbMethods): ... this and make extern.
4999 (GdbModuleDef): Rename to ...
5000 (python_GdbModuleDef): ... this and make extern.
5002 2015-02-27 Pedro Alves <palves@redhat.com>
5004 * record-btrace.c (set_record_btrace_cmdlist)
5005 (show_record_btrace_cmdlist): Remove redefinitions.
5007 2015-02-27 Tom Tromey <tromey@redhat.com>
5008 Pedro Alves <palves@redhat.com>
5010 * dwarf2-frame.c (enum cfa_how_kind, struct
5011 dwarf2_frame_state_reg_info): Move out of struct
5013 * dwarf2read.c (struct tu_stats): Move out of struct
5015 (struct file_entry): Move out of struct line_header.
5016 (struct nextfield, struct nextfnfield, struct fnfieldlist, struct
5017 typedef_field_list): Move out of struct field_info.
5018 * gdbtypes.h (enum dynamic_prop_kind, union dynamic_prop_data):
5019 Move out of struct dynamic_prop.
5020 (union type_owner, union field_location, struct field, struct
5021 range_bounds, union type_specific): Move out of struct main_type.
5022 (struct fn_fieldlist, struct fn_field, struct typedef_field)
5023 (VOFFSET_STATIC): Move out of struct cplus_struct_type.
5024 (struct call_site_target, union call_site_parameter_u, struct
5025 call_site_parameter): Move out of struct call_site.
5026 * m32c-tdep.c (enum m32c_prologue_kind): Move out of struct
5028 (enum srcdest_kind): Move out of struct srcdest.
5029 * main.c (enum cmdarg_kind): Move out of struct cmdarg.
5030 * prologue-value.h (enum prologue_value_kind): Move out of struct
5032 * s390-linux-tdep.c (enum s390_abi_kind): Move out of struct
5034 * stabsread.c (struct nextfield, struct next_fnfieldlist): Move
5035 out of struct field_info.
5036 * symfile.h (struct other_sections): Move out of struct
5038 * symtab.c (struct symbol_cache_slot): Move out struct
5040 * target-descriptions.c (enum tdesc_type_kind): Move out of
5041 typedef struct tdesc_type.
5042 * tui/tui-data.h (enum tui_line_or_address_kind): Move out of
5043 struct tui_line_or_address.
5044 * value.c (enum internalvar_kind, union internalvar_data): Move
5045 out of struct internalvar.
5046 * xtensa-tdep.h (struct ctype_cache): Move out of struct
5049 2015-02-27 Tom Tromey <tromey@redhat.com>
5050 Pedro Alves <palves@redhat.com>
5052 Rename symbols whose names are reserved C++ keywords throughout.
5054 2015-02-27 Pedro Alves <palves@redhat.com>
5056 * Makefile.in (COMPILER): New, get it from autoconf.
5057 (COMPILE.pre, CC_LD): Use COMPILER.
5058 (CXX): Get from autoconf instead.
5059 (CXX_FOR_TARGET): Default to g++ instead of gcc.
5060 * acinclude.m4: Include build-with-cxx.m4.
5061 * build-with-cxx.m4: New file.
5062 * configure.ac: Call AC_PROG_CXX and GDB_AC_BUILD_WITH_CXX.
5063 Disable -Werror by default if building in C++ mode.
5064 (build_warnings): Add -Wno-sign-compare, -Wno-write-strings and
5065 -Wno-narrowing in C++ mode. Only enable -Wpointer-sign in C mode.
5066 Run supported-warning-flags tests with the C++ compiler.
5067 Save/restore CXXFLAGS too.
5068 * configure: Regenerate.
5070 2015-02-27 Pedro Alves <palves@redhat.com>
5072 * libiberty.m4: New file.
5073 * acinclude.m4: Include libiberty.m4.
5074 * configure.ac: Call libiberty_INIT.
5075 * config.in, configure: Regenerate.
5077 2015-02-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
5079 * s390-linux-tdep.c (s390_gcc_target_options): Not just handle
5080 31-bit targets, but 64-bit targets as well.
5081 (s390_gnu_triplet_regexp): New function.
5082 (s390_gdbarch_init): Set the gcc_target_options gdbarch method for
5083 64-bit targets as well. Set the gnu_triplet_regexp gdbarch
5086 2015-02-27 Jon TURNEY <jon.turney@dronecode.org.uk> (tiny patch)
5088 * windows-nat.c (CONTEXT_DEBUGGER): Remove.
5089 (CONTEXT_DEBUGGER_DR): Add CONTEXT_SEGMENTS. Incorporate flags
5090 from CONTEXT_DEBUGGER.
5092 2015-02-26 Doug Evans <dje@google.com>
5094 * gdbtypes.c (internal_type_vptr_fieldno): Add missing call to
5096 (set_type_vptr_fieldno): Ditto.
5097 (internal_type_vptr_basetype, set_type_vptr_basetype): Ditto.
5098 * gnu-v3-abi.c (gnuv3_dynamic_class): Ditto.
5100 2015-02-26 Pedro Alves <palves@redhat.com>
5102 * auto-load.h (file_is_auto_load_safe): Add ATTRIBUTE_PRINTF.
5103 * complaints.c (vcomplaint): Pass argument FMT directly to
5104 printf-like functions instead of complaint->fmt.
5105 * ctf.c (ctf_save_write_metadata): Add ATTRIBUTE_PRINTF.
5106 * darwin-nat.c (inferior_debug): Add ATTRIBUTE_PRINTF.
5107 * compile/compile-loc2c.c (pushf, unary, binary): Add
5109 (do_compile_dwarf_expr_to_c): Pass string literal as format string
5111 (BINARY): Pass string literal as format string to 'binary'.
5112 * compile/compile-object-load.c (link_callbacks_einfo): Add
5114 * guile/guile-internal.h (gdbscm_printf): Add ATTRIBUTE_PRINTF.
5116 2015-02-26 Pedro Alves <palves@redhat.com>
5118 * windows-termcap.c: Rename to ...
5119 * stub-termcap.c: ... this. Adjust header line.
5120 * Makefile.in (SFILES): Refer to stub-termcap.c instead of
5122 * configure: Regenerate.
5123 * configure.ac: Refer to stub-termcap.o instead of
5125 * gdb_curses.h: Mention stub-termcap.c instead of
5128 2015-02-26 Jan Kratochvil <jan.kratochvil@redhat.com>
5130 * compile/compile-c-symbols.c (convert_one_symbol, convert_symbol_bmsym)
5131 (gcc_symbol_address): Call gnu_ifunc_resolve_addr.
5133 2015-02-26 Antoine Tremblay <antoine.tremblay@ericsson.com>
5135 * gdb/infcmd.c (print_return_value): use type_to_string to print type.
5137 2015-02-26 Jan Kratochvil <jan.kratochvil@redhat.com>
5139 * elfread.c (elf_read_minimal_symbols): Use bfd_alloc for
5140 bfd_canonicalize_symtab.
5142 2015-02-25 John Baldwin <jhb@FreeBSD.org>
5144 * amd64fbsd-nat.c: Include sys/user.h.
5145 (_initialize_amd64fbsd_nat): Use the KERN_PROC_SIGTRAMP sysctl
5146 instead of KERN_PS_STRINGS to locate the signal trampoline.
5147 * i386fbsd-nat.c: Include sys/user.h.
5148 (_initialize_i386fbsd_nat): Use the KERN_PROC_SIGTRAMP sysctl
5149 instead of KERN_PS_STRINGS to locate the signal trampoline.
5150 * amd64fbsd-tdep.c (amd64fbsd_sigtramp_code): New.
5151 (amd64fbsd_sigtramp_p): New.
5152 (amd64fbsd_sigtramp_start_addr, amd64fbsd_sigtramp_end_addr): No
5153 longer set default values.
5154 (amd64fbsd_init_abi): Set "sigtramp_p" to "amd64fbsd_sigtramp_p".
5155 * i386fbsd-tdep.c (i386fbsd_sigtramp_start)
5156 (i386fbsd_sigtramp_middle, i386fbsd_sigtramp_end)
5157 (i386fbsd_freebsd4_sigtramp_start)
5158 (i386fbsd_freebsd4_sigtramp_middle)
5159 (i386fbsd_freebsd4_sigtramp_end, i386fbsd_osigtramp_start)
5160 (i386fbsd_osigtramp_middle, i386fbsd_osigtramp_end): New.
5161 (i386fbsd_sigtramp_p): New.
5162 (i386fbsd_sigtramp_start_addr, i386fbsd_sigtramp_end_addr): No
5163 longer set default values.
5164 (i386fbsd_init_abi): Set "sigtramp_p" to "i386fbsd_sigtramp_p".
5166 2015-02-25 John Baldwin <jhb@freebsd.org>
5168 * amd64fbsd-tdep.c (amd64fbsd_sigcontext_addr): Use
5169 get_frame_register instead of frame_unwind_register_unsigned.
5171 2015-02-26 Jan Kratochvil <jan.kratochvil@redhat.com>
5174 * compile/compile-c-support.c (c_compute_program): Change // comment.
5175 * compile/compile-object-load.c (setup_sections): Change // comment.
5177 2015-02-26 Joel Brobecker <brobecker@adacore.com>
5180 * iq2000-tdep.c (iq2000_frame_cache): Delete C++-style comment.
5182 2015-02-23 Pedro Alves <palves@redhat.com>
5184 * remote.c (skip_to_semicolon): New function.
5185 (remote_parse_stop_reply) <T stop reply>: Use it. Don't
5186 special case the stop reasons that look like hex numbers
5187 upfront. Instead handle real register numbers after matching
5188 all the known stop reasons.
5190 2015-02-21 Doug Evans <dje@google.com>
5192 PR c++/17976, symtab/17821
5193 * cp-namespace.c (cp_search_static_and_baseclasses): New parameter
5194 is_in_anonymous. All callers updated.
5195 (find_symbol_in_baseclass): Ditto.
5196 (cp_lookup_nested_symbol_1): Ditto. Don't search all static blocks
5197 for symbols in an anonymous namespace.
5198 * dwarf2read.c (namespace_name): Don't call dwarf2_name, fetch
5199 DW_AT_name directly.
5200 (dwarf2_name): Convert missing namespace name to
5201 CP_ANONYMOUS_NAMESPACE_STR.
5203 2015-02-20 Pedro Alves <palves@redhat.com>
5205 * linux-nat.c (linux_handle_extended_wait): Call
5206 thread_db_notice_clone whenever a new clone LWP is detected.
5207 (linux_stop_and_wait_all_lwps, linux_unstop_all_lwps): New
5209 * linux-nat.h (thread_db_attach_lwp): Delete declaration.
5210 (thread_db_notice_clone, linux_stop_and_wait_all_lwps)
5211 (linux_unstop_all_lwps): Declare.
5212 * linux-thread-db.c (struct thread_get_info_inout): Delete.
5213 (thread_get_info_callback): Delete.
5214 (thread_from_lwp): Use td_thr_get_info and record_thread.
5215 (thread_db_attach_lwp): Delete.
5216 (thread_db_notice_clone): New function.
5217 (try_thread_db_load_1): If /proc is mounted and shows the
5218 process'es task list, walk over all LWPs and call thread_from_lwp
5219 instead of relying on td_ta_thr_iter.
5220 (attach_thread): Don't call check_thread_signals here. Split the
5221 tail part of the function (which adds the thread to the core GDB
5223 (record_thread): ... this function. Call check_thread_signals
5225 (thread_db_wait): Don't call thread_db_find_new_threads_1. Always
5226 call thread_from_lwp.
5227 (thread_db_update_thread_list): Rename to ...
5228 (thread_db_update_thread_list_org): ... this.
5229 (thread_db_update_thread_list): New function.
5230 (thread_db_find_thread_from_tid): Delete.
5231 (thread_db_get_ada_task_ptid): Simplify.
5232 * nat/linux-procfs.c: Include <sys/stat.h>.
5233 (linux_proc_task_list_dir_exists): New function.
5234 * nat/linux-procfs.h (linux_proc_task_list_dir_exists): Declare.
5236 2015-02-20 Pedro Alves <palves@redhat.com>
5238 * linux-nat.c (lin_lwp_attach_lwp): No longer special case the
5239 main LWP. Handle the case of waitpid returning 0 if we're already
5240 attached to the LWP. Don't set the LWP's last_resume_kind to
5241 resume_stop if we already knew about the LWP.
5242 (linux_nat_filter_event): Add debug logs.
5244 2015-02-20 Pedro Alves <palves@redhat.com>
5246 * target.h (forward_target_decr_pc_after_break): Delete
5249 2015-02-20 Pedro Alves <palves@redhat.com>
5252 * linux-thread-db.c (thread_get_info_callback): Return early if
5253 the thread's lwp id is -1.
5255 2015-02-20 Joel Brobecker <brobecker@adacore.com>
5259 2015-02-19 Steve Ellcey <sellcey@imgtec.com>
5261 * dtrace-probe.c (dtrace_process_dof_probe): Initialize arg.expr.
5262 (dtrace_get_probes) Change type of variable 'dof'.
5264 2015-02-19 Antoine Tremblay <antoine.tremblay@ericsson.com>
5266 PR breakpoints/16812
5267 * linux-nat.c (linux_nat_filter_event): Report SIGTRAP,SIGILL,SIGSEGV.
5268 * nat/linux-ptrace.c (linux_wstatus_maybe_breakpoint): Add.
5269 * nat/linux-ptrace.h: Add linux_wstatus_maybe_breakpoint.
5271 2015-02-19 David Taylor <dtaylor@emc.com>
5273 * common/ax.def (setv): Fix consumed entry in setv DEFOP.
5275 2015-02-18 Patrick Palka <patrick@parcs.ath.cx>
5277 * tui/tui-io.c (tui_handle_resize_during_io): Remove this
5279 (tui_putc): Don't call tui_handle_resize_during_io.
5280 (tui_getc): Likewise.
5281 (tui_mld_getc): Likewise.
5282 * tui/tui-win.c: Include event-loop.h and tui/tui-io.h.
5283 (tui_sigwinch_token): New static variable.
5284 (tui_initialize_win): Adjust documentation. Set
5286 (tui_async_resize_screen): New asynchronous callback.
5287 (tui_sigwinch_handler): Adjust documentation. Asynchronously
5288 invoke tui_async_resize_screen.
5290 2015-02-18 Jose E. Marchesi <jose.marchesi@oracle.com>
5292 * configure: Regenerated.
5293 * configure.ac: Use GDB_AC_TRANSFORM.
5294 * Makefile.in (aclocal_m4_deps): Added transform.m4.
5295 * acinclude.m4: sinclude transform.m4.
5296 * transform.m4: New file.
5297 (GDB_AC_TRANSFORM): New macro.
5299 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
5301 * NEWS: Announce the support for DTrace SDT probes.
5303 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
5305 * amd64-linux-tdep.c: Include "parser-defs.h" and "user-regs.h".
5306 (amd64_dtrace_parse_probe_argument): New function.
5307 (amd64_dtrace_probe_is_enabled): Likewise.
5308 (amd64_dtrace_enable_probe): Likewise.
5309 (amd64_dtrace_disable_probe): Likewise.
5310 (amd64_linux_init_abi): Register the
5311 `gdbarch_dtrace_probe_argument', `gdbarch_dtrace_enable_probe',
5312 `gdbarch_dtrace_disable_probe' and
5313 `gdbarch_dtrace_probe_is_enabled' hooks.
5314 (amd64_dtrace_disabled_probe_sequence_1): New constant.
5315 (amd64_dtrace_disabled_probe_sequence_2): Likewise.
5316 (amd64_dtrace_enable_probe_sequence): Likewise.
5317 (amd64_dtrace_disable_probe_sequence): Likewise.
5319 2015-01-17 Jose E. Marchesi <jose.marchesi@oracle.com>
5321 * breakpoint.c (BREAK_ARGS_HELP): Help string updated to mention
5322 the -probe-dtrace new vpossible value for PROBE_MODIFIER.
5323 * configure.ac (CONFIG_OBS): dtrace-probe.o added if BFD can
5325 * Makefile.in (SFILES): dtrace-probe.c added.
5326 * configure: Regenerate.
5327 * dtrace-probe.c: New file.
5328 (SHT_SUNW_dof): New constant.
5329 (dtrace_probe_type): New enum.
5330 (dtrace_probe_arg): New struct.
5331 (dtrace_probe_arg_s): New typedef.
5332 (struct dtrace_probe_enabler): New struct.
5333 (dtrace_probe_enabler_s): New typedef.
5334 (dtrace_probe): New struct.
5335 (dtrace_probe_is_linespec): New function.
5336 (dtrace_dof_sect_type): New enum.
5337 (dtrace_dof_dofh_ident): Likewise.
5338 (dtrace_dof_encoding): Likewise.
5339 (DTRACE_DOF_ENCODE_LSB): Likewise.
5340 (DTRACE_DOF_ENCODE_MSB): Likewise.
5341 (dtrace_dof_hdr): New struct.
5342 (dtrace_dof_sect): Likewise.
5343 (dtrace_dof_provider): Likewise.
5344 (dtrace_dof_probe): Likewise.
5345 (DOF_UINT): New macro.
5346 (DTRACE_DOF_PTR): Likewise.
5347 (DTRACE_DOF_SECT): Likewise.
5348 (dtrace_process_dof_probe): New function.
5349 (dtrace_process_dof): Likewise.
5350 (dtrace_build_arg_exprs): Likewise.
5351 (dtrace_get_arg): Likewise.
5352 (dtrace_get_probes): Likewise.
5353 (dtrace_get_probe_argument_count): Likewise.
5354 (dtrace_can_evaluate_probe_arguments): Likewise.
5355 (dtrace_evaluate_probe_argument): Likewise.
5356 (dtrace_compile_to_ax): Likewise.
5357 (dtrace_probe_destroy): Likewise.
5358 (dtrace_gen_info_probes_table_header): Likewise.
5359 (dtrace_gen_info_probes_table_values): Likewise.
5360 (dtrace_probe_is_enabled): Likewise.
5361 (dtrace_probe_ops): New variable.
5362 (info_probes_dtrace_command): New function.
5363 (_initialize_dtrace_probe): Likewise.
5364 (dtrace_type_name): Likewise.
5366 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
5368 * gdbarch.sh (dtrace_parse_probe_argument): New.
5369 (dtrace_probe_is_enabled): Likewise.
5370 (dtrace_enable_probe): Likewise.
5371 (dtrace_disable_probe): Likewise.
5372 * gdbarch.c: Regenerate.
5373 * gdbarch.h: Regenerate.
5375 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
5377 * stap-probe.c (stap_probe_ops): Add NULLs in the static
5378 stap_probe_ops for `enable_probe' and `disable_probe'.
5379 * probe.c (enable_probes_command): New function.
5380 (disable_probes_command): Likewise.
5381 (_initialize_probe): Define the cli commands `enable probe' and
5383 (parse_probe_linespec): New function.
5384 (info_probes_for_ops): Use parse_probe_linespec.
5385 * probe.h (probe_ops): New hooks `enable_probe' and
5388 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
5390 * probe.c (compute_probe_arg): Moved from stap-probe.c
5391 (compile_probe_arg): Likewise.
5392 (probe_funcs): Likewise.
5393 * stap-probe.c (compute_probe_arg): Moved to probe.c.
5394 (compile_probe_arg): Likewise.
5395 (probe_funcs): Likewise.
5397 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
5399 * probe.c (print_ui_out_not_applicables): New function.
5400 (exists_probe_with_pops): Likewise.
5401 (info_probes_for_ops): Do not include column headers for probe
5402 types for which no probe has been actually found on any object.
5403 Also invoke `print_ui_out_not_applicables' in order to match the
5404 column rows with the header when probes of several types are
5406 Print the "Type" column.
5407 * probe.h (probe_ops): Added a new probe operation `type_name'.
5408 * stap-probe.c (stap_probe_ops): Add `stap_type_name'.
5409 (stap_type_name): New function.
5411 2015-02-17 Patrick Palka <patrick@parcs.ath.cx>
5413 * tui/tui-io.c (tui_getc): Don't call key_is_command_char.
5414 (key_is_command_char): Delete.
5416 2015-02-17 Pedro Alves <palves@redhat.com>
5418 * tui/tui.c (tui_enable): Resize windows before anything
5419 might show a window.
5421 2015-02-17 Max Ostapenko <m.ostapenko@partner.samsung.com>
5424 * aarch64-linux-nat.c: Don't include features/aarch64.c anymore.
5425 (aarch64_linux_read_description): Remove initialize_tdesc_aarch64
5427 * aarch64-tdep.h (tdesc_aarch64): Declare.
5429 2015-02-12 Mark Wielaard <mjw@redhat.com>
5431 * contrib/ari/gdb_ari.sh: Remove checks for "true" and "false".
5433 2015-02-13 Doug Evans <dje@google.com>
5435 * cp-namespace.c (cp_basic_lookup_symbol): Rename parameter
5436 anonymous_namespace to is_in_anonymous for consistency with the rest
5438 (cp_lookup_bare_symbol): Fix typo in comment.
5439 (cp_search_static_and_baseclasses): Ditto.
5440 (search_symbol_list): Use vertical space in comment better.
5441 (reset_directive_searched): Ditto. Fix typo.
5442 (cp_lookup_nested_symbol_1): Clarify contents of NESTED_NAME parameter.
5444 2015-02-13 Yao Qi <yao.qi@arm.com>
5446 * MAINTAINERS: Update my email address.
5448 2015-02-12 Doug Evans <dje@google.com>
5450 * symtab.c (completion_list_add_name): Fix memory leak.
5452 2015-02-12 Doug Evans <dje@google.com>
5454 * completer.c (complete_line): Remove incorrect comment.
5456 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
5458 * python/py-framefilter.c (py_print_single_arg, enumerate_locals)
5459 (py_print_frame): Use RETURN_MASK_ERROR.
5461 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
5463 * python/py-framefilter.c (py_print_frame): Mention RETURN_QUIT in
5464 function comment. Wrap all function that can throw in cleanups.
5465 (gdbpy_apply_frame_filter): Wrap all function that can throw in
5468 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
5470 * python/py-framefilter.c (py_print_frame): Substitute goto error.
5471 Remove the error label.
5473 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
5475 * python/py-framefilter.c (py_print_frame): Put conditional code paths
5476 with goto first, indent the former else codepath left. Put variable
5477 'elided' to a new inner block.
5479 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
5481 * python/py-framefilter.c (py_print_frame): Whitespacing fixes.
5483 2015-02-11 Pedro Alves <palves@redhat.com>
5485 * xcoffread.c (within_function): Delete.
5487 2015-02-11 Tom Tromey <tromey@redhat.com>
5488 Pedro Alves <palves@redhat.com>
5490 * breakpoint.c (base_breakpoint_ops): Delete.
5491 * dwarf2loc.c (dwarf_expr_ctx_funcs): Make extern.
5492 * elfread.c (elf_sym_fns_gdb_index, elf_sym_fns_lazy_psyms): Make extern.
5493 * guile/guile.c (guile_extension_script_ops, guile_extension_ops): Make extern.
5494 * ppcnbsd-tdep.c (ppcnbsd2_sigtramp): Make extern.
5495 * python/py-arch.c (arch_object_type): Make extern.
5496 * python/py-block.c (block_syms_iterator_object_type): Make extern.
5497 * python/py-bpevent.c (breakpoint_event_object_type): Make extern.
5498 * python/py-cmd.c (cmdpy_object_type): Make extern.
5499 * python/py-continueevent.c (continue_event_object_type)
5500 * python/py-event.h (GDBPY_NEW_EVENT_TYPE): Remove 'qual'
5501 parameter. Update all callers.
5502 * python/py-evtregistry.c (eventregistry_object_type): Make extern.
5503 * python/py-exitedevent.c (exited_event_object_type): Make extern.
5504 * python/py-finishbreakpoint.c (finish_breakpoint_object_type): Make extern.
5505 * python/py-function.c (fnpy_object_type): Make extern.
5506 * python/py-inferior.c (inferior_object_type, membuf_object_type): Make extern.
5507 * python/py-infevents.c (call_pre_event_object_type)
5508 (inferior_call_post_event_object_type).
5509 (memory_changed_event_object_type): Make extern.
5510 * python/py-infthread.c (thread_object_type): Make extern.
5511 * python/py-lazy-string.c (lazy_string_object_type): Make extern.
5512 * python/py-linetable.c (linetable_entry_object_type)
5513 (linetable_object_type, ltpy_iterator_object_type): Make extern.
5514 * python/py-newobjfileevent.c (new_objfile_event_object_type)
5515 (clear_objfiles_event_object_type): Make extern.
5516 * python/py-objfile.c (objfile_object_type): Make extern.
5517 * python/py-param.c (parmpy_object_type): Make extern.
5518 * python/py-progspace.c (pspace_object_type): Make extern.
5519 * python/py-signalevent.c (signal_event_object_type): Make extern.
5520 * python/py-symtab.c (symtab_object_type, sal_object_type): Make extern.
5521 * python/py-type.c (type_object_type, field_object_type)
5522 (type_iterator_object_type): Make extern.
5523 * python/python.c (python_extension_script_ops)
5524 (python_extension_ops): Make extern.
5525 * stap-probe.c (stap_probe_ops): Make extern.
5527 2015-02-11 Pedro Alves <pedro@codesourcery.com>
5529 * infrun.c (adjust_pc_after_break): Don't adjust the PC just
5530 because the event thread is not the current thread.
5532 2015-02-11 Doug Evans <xdje42@gmail.com>
5534 * gdbtypes.c (internal_type_self_type): If TYPE_SPECIFIC_FIELD hasn't
5535 been initialized yet, return NULL.
5537 2015-02-11 Doug Evans <dje@google.com>
5539 * symfile.h (new_symfile_objfile): Delete.
5540 * symfile.c (finish_new_objfile): Renamed from new_symfile_objfile.
5541 All callers updated.
5543 2015-02-11 Patrick Palka <patrick@parcs.ath.cx>
5545 * tui/tui-io.c (tui_handle_resize_during_io): Call
5546 tui_update_gdb_sizes() after resizing the screen.
5547 * tui/tui.c (tui_enable): Resize the terminal before
5548 calling tui_update_gdb_sizes().
5550 2015-02-11 Patrick Palka <patrick@parcs.ath.cx>
5552 * tui/tui-io.c (tui_getc): Move cursor to the end of the command
5553 line before printing a newline.
5555 2015-02-11 Mark Wielaard <mjw@redhat.com>
5557 * utils.c (producer_is_gcc): Return true or false.
5559 2015-02-10 Mark Wielaard <mjw@redhat.com>
5561 * utils.h (producer_is_gcc): Change return type to bool. Add major
5563 * utils.c (producer_is_gcc): Likewise.
5564 (producer_is_gcc_ge_4): Adjust producer_is_gcc call.
5565 * dwarf2read.c (check_producer): Likewise.
5567 2015-02-10 Pedro Alves <palves@redhat.com>
5569 * infrun.c (displaced_step_fixup): Switch to the event thread
5570 before calling gdbarch_displaced_step_fixup.
5572 2015-02-10 Antoine Tremblay <antoine.tremblay@ericsson.com>
5574 * MAINTAINERS (Write After Approval): Add Antoine Tremblay.
5576 2015-02-10 Simon Marchi <simon.marchi@ericsson.com>
5578 * ada-varobj.c (ada_name_of_child): Constify parent.
5579 (ada_path_expr_of_child): Same.
5580 (ada_value_of_child): Same.
5581 (ada_type_of_child): Same.
5582 * c-varobj.c (c_is_path_expr_parent): Same.
5583 (c_describe_child): Same.
5584 (c_name_of_child): Same.
5585 (c_value_of_child): Same.
5586 (c_type_of_child): Same.
5587 (cplus_number_of_children): Same.
5588 (cplus_describe_child): Constify var.
5589 (cplus_name_of_child): Constify parent.
5590 (cplus_value_of_child): Same.
5591 (cplus_type_of_child): Same.
5592 * jv-varobj.c (java_name_of_child): Same.
5593 (java_value_of_child): Same.
5594 (java_type_of_child): Same.
5595 * varobj.c (value_of_child): Same.
5596 (varobj_default_is_path_expr_parent): Constify var, parent and return
5598 (varobj_get_path_expr): Constify var, modify path_expr through
5600 (install_new_value): Constify parent.
5601 (value_of_child): Constify parent.
5602 * varobj.h (struct varobj): Constify parent.
5603 (struct lang_varobj_ops): Constify name_of_child, value_of_child and
5605 (varobj_get_path_expr): Constify var.
5606 (varobj_get_path_expr_parent): Constify var and return value.
5608 2015-02-10 Luis Machado <lgustavo@codesourcery.com>
5610 * arm-tdep.c (arm_prologue_unwind_stop_reason): New function.
5611 (arm_prologue_this_id): Move PC and SP limit checks to
5612 arm_prologue_unwind_stop_reason.
5613 (arm_prologue_unwind) <stop_reason> : Set to
5614 arm_prologue_unwind_stop_reason.
5616 2015-02-09 Mark Wielaard <mjw@redhat.com>
5618 * dwarf2read.c (set_cu_language): Recognize DW_LANG_Fortran03 and
5619 DW_LANG_Fortran08 as language_fortran.
5621 2015-02-09 Sergio Durigan Junior <sergiodj@redhat.com>
5624 * gdb/remote.c (remote_parse_stop_reply): Fix wrong comparison
5625 of pointer against char.
5627 2015-02-09 Mark Wielaard <mjw@redhat.com>
5629 * c-typeprint.c (cp_type_print_method_args): Handle '_Atomic'.
5630 (c_type_print_modifier): Likewise.
5631 * dwarf2read.c (read_tag_atomic_type): New function.
5632 (read_type_die_1): Handle DW_TAG_atomic_type.
5633 * gdbtypes.c (make_atomic_type): New function.
5634 (recursive_dump_type): Handle TYPE_ATOMIC.
5635 * gdbtypes.h (enum type_flag_values): Renumber.
5636 (enum type_instance_flag_value): Add TYPE_INSTANCE_FLAG_ATOMIC.
5637 (TYPE_ATOMIC): New macro.
5638 (make_atomic_type): Declare.
5640 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
5642 * btrace.c (ftrace_find_call): Skip gaps.
5643 (ftrace_new_function): Initialize level.
5644 (ftrace_new_call, ftrace_new_tailcall, ftrace_new_return)
5645 (ftrace_new_switch): Update
5647 (ftrace_new_gap): New.
5648 (ftrace_update_function): Create new function after gap.
5649 (btrace_compute_ftrace_bts): Create gap on error.
5650 (btrace_stitch_bts): Update parameters. Clear trace if it
5652 (btrace_stitch_trace): Update parameters. Update callers.
5653 (btrace_clear): Reset the number of gaps.
5654 (btrace_insn_get): Return NULL if the iterator points to a gap.
5655 (btrace_insn_number): Return zero if the iterator points to a gap.
5656 (btrace_insn_end): Allow gaps at the end.
5657 (btrace_insn_next, btrace_insn_prev, btrace_insn_cmp): Handle gaps.
5658 (btrace_find_insn_by_number): Assert that the found iterator does
5660 (btrace_call_next, btrace_call_prev): Assert that the last function
5662 * btrace.h (btrace_bts_error): New.
5663 (btrace_function): Update comment.
5664 (btrace_function) <insn, insn_offset, number>: Update comment.
5665 (btrace_function) <errcode>: New.
5666 (btrace_thread_info) <ngaps>: New.
5667 (btrace_thread_info) <replay>: Update comment.
5668 (btrace_insn_get): Update comment.
5669 * record-btrace.c (btrace_ui_out_decode_error): New.
5670 (record_btrace_info): Print number of gaps.
5671 (btrace_insn_history, btrace_call_history): Call
5672 btrace_ui_out_decode_error for gaps.
5673 (record_btrace_step_thread, record_btrace_start_replaying): Skip gaps.
5675 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
5677 * common/btrace-common.h (btrace_cpu_vendor, btrace_cpu): New.
5678 * nat/linux-btrace.c: (btrace_this_cpu): New.
5679 (cpu_supports_bts): Call btrace_this_cpu.
5680 (intel_supports_bts): Add cpu parameter.
5682 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
5684 * btrace.h (btrace_insn_class): New.
5685 (btrace_insn) <size, iclass>: New.
5686 * btrace.c (ftrace_find_call): Update parameters. Update users.
5687 Use instruction classification.
5688 (ftrace_new_return): Update parameters. Update users.
5689 (ftrace_update_function): Update parameters. Update users. Use
5690 instruction classification.
5691 (ftrace_update_insns): Update parameters. Update users.
5692 (ftrace_classify_insn): New.
5693 (btrace_compute_ftrace_bts): Fill in new btrace_insn fields. Add
5694 TRY_CATCH around call to gdb_insn_length.
5696 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
5698 * btrace.c (btrace_compute_ftrace_bts, btrace_compute_ftrace):
5699 Update parameters. Update users.
5701 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
5703 * btrace.c (parse_xml_btrace_conf_bts): Add size.
5704 (btrace_conf_bts_attributes): New.
5705 (btrace_conf_children): Add attributes.
5706 * common/btrace-common.h (btrace_config_bts): New.
5707 (btrace_config)<bts>: New.
5708 (btrace_config): Update comment.
5709 * nat/linux-btrace.c (linux_enable_btrace, linux_enable_bts):
5711 * features/btrace-conf.dtd: Increment version. Add size
5712 attribute to bts element.
5713 * record-btrace.c (set_record_btrace_bts_cmdlist,
5714 show_record_btrace_bts_cmdlist): New.
5715 (record_btrace_adjust_size, record_btrace_print_bts_conf,
5716 record_btrace_print_conf, cmd_set_record_btrace_bts,
5717 cmd_show_record_btrace_bts): New.
5718 (record_btrace_info): Call record_btrace_print_conf.
5719 (_initialize_record_btrace): Add commands.
5720 * remote.c: Add PACKET_Qbtrace_conf_bts_size enum.
5721 (remote_protocol_features): Add Qbtrace-conf:bts:size packet.
5722 (btrace_sync_conf): Synchronize bts size.
5723 (_initialize_remote): Add Qbtrace-conf:bts:size packet.
5724 * NEWS: Announce new commands and new packets.
5726 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
5728 * Makefile.in (XMLFILES): Add btrace-conf.dtd.
5729 * x86-linux-nat.c (x86_linux_enable_btrace): Update parameters.
5730 (x86_linux_btrace_conf): New.
5731 (x86_linux_create_target): Initialize to_btrace_conf.
5732 * nat/linux-btrace.c (linux_enable_btrace): Update parameters.
5733 Check format. Split into this and ...
5734 (linux_enable_bts): ... this.
5735 (linux_btrace_conf): New.
5736 (perf_event_skip_record): Renamed into ...
5737 (perf_event_skip_bts_record): ... this. Updated users.
5738 (linux_disable_btrace): Split into this and ...
5739 (linux_disable_bts): ... this.
5740 (linux_read_btrace): Check format.
5741 * nat/linux-btrace.h (linux_enable_btrace): Update parameters.
5742 (linux_btrace_conf): New.
5743 (btrace_target_info)<ptid>: Moved.
5744 (btrace_target_info)<conf>: New.
5745 (btrace_target_info): Split into this and ...
5746 (btrace_tinfo_bts): ... this. Updated users.
5747 * btrace.c (btrace_enable): Update parameters.
5748 (btrace_conf, parse_xml_btrace_conf_bts, parse_xml_btrace_conf)
5749 (btrace_conf_children, btrace_conf_attributes)
5750 (btrace_conf_elements): New.
5751 * btrace.h (btrace_enable): Update parameters.
5752 (btrace_conf, parse_xml_btrace_conf): New.
5753 * common/btrace-common.h (btrace_config): New.
5754 * feature/btrace-conf.dtd: New.
5755 * record-btrace.c (record_btrace_conf): New.
5756 (record_btrace_cmdlist): New.
5757 (record_btrace_enable_warn, record_btrace_open): Pass
5758 &record_btrace_conf.
5759 (record_btrace_info): Print recording format.
5760 (cmd_record_btrace_bts_start): New.
5761 (cmd_record_btrace_start): Call cmd_record_btrace_bts_start.
5762 (_initialize_record_btrace): Add "record btrace bts" subcommand.
5763 Add "record bts" alias command.
5764 * remote.c (remote_state)<btrace_config>: New.
5765 (remote_btrace_reset, PACKET_qXfer_btrace_conf): New.
5766 (remote_protocol_features): Add qXfer:btrace-conf:read.
5767 (remote_open_1): Call remote_btrace_reset.
5768 (remote_xfer_partial): Handle TARGET_OBJECT_BTRACE_CONF.
5769 (btrace_target_info)<conf>: New.
5770 (btrace_sync_conf, btrace_read_config): New.
5771 (remote_enable_btrace): Update parameters. Call btrace_sync_conf and
5773 (remote_btrace_conf): New.
5774 (init_remote_ops): Initialize to_btrace_conf.
5775 (_initialize_remote): Add qXfer:btrace-conf packet.
5776 * target.c (target_enable_btrace): Update parameters.
5777 (target_btrace_conf): New.
5778 * target.h (target_enable_btrace): Update parameters.
5779 (target_btrace_conf): New.
5780 (target_object)<TARGET_OBJECT_BTRACE_CONF>: New.
5781 (target_ops)<to_enable_btrace>: Update parameters and comment.
5782 (target_ops)<to_btrace_conf>: New.
5783 * target-delegates: Regenerate.
5784 * target-debug.h (target_debug_print_const_struct_btrace_config_p)
5785 (target_debug_print_const_struct_btrace_target_info_p): New.
5786 * NEWS: Announce new command and new packet.
5788 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
5790 * nat/linux-btrace.h (perf_event_buffer): New.
5791 (btrace_target_info) <buffer, size, data_head>: Replace with ...
5793 * nat/linux-btrace.c (perf_event_header, perf_event_mmap_size)
5794 (perf_event_buffer_size, perf_event_buffer_begin)
5795 (perf_event_buffer_end, linux_btrace_has_changed): Removed.
5797 (perf_event_new_data): New.
5799 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
5801 * btrace.c (btrace_enable): Pass BTRACE_FORMAT_BTS.
5802 * record-btrace.c (record_btrace_open): Remove call to
5803 target_supports_btrace.
5804 * remote.c (remote_supports_btrace): Update parameters.
5805 * target.c (target_supports_btrace): Update parameters.
5806 * target.h (to_supports_btrace, target_supports_btrace): Update
5808 * target-delegates.c: Regenerate.
5809 * target-debug.h (target_debug_print_enum_btrace_format): New.
5810 * nat/linux-btrace.c
5811 (kernel_supports_btrace): Rename into ...
5812 (kernel_supports_bts): ... this. Update users. Update warning text.
5813 (intel_supports_btrace): Rename into ...
5814 (intel_supports_bts): ... this. Update users.
5815 (cpu_supports_btrace): Rename into ...
5816 (cpu_supports_bts): ... this. Update users.
5817 (linux_supports_btrace): Update parameters. Split into this and ...
5818 (linux_supports_bts): ... this.
5819 * nat/linux-btrace.h (linux_supports_btrace): Update parameters.
5821 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
5823 * Makefile.in (SFILES): Add common/btrace-common.c.
5824 (COMMON_OBS): Add common/btrace-common.o.
5825 (btrace-common.o): Add build rules.
5826 * btrace.c (parse_xml_btrace): Update parameters.
5827 (parse_xml_btrace_block): Set format field.
5828 (btrace_add_pc, btrace_fetch): Use struct btrace_data.
5829 (do_btrace_data_cleanup, make_cleanup_btrace_data): New.
5830 (btrace_compute_ftrace): Split into this and...
5831 (btrace_compute_ftrace_bts): ...this.
5832 (btrace_stitch_trace): Split into this and...
5833 (btrace_stitch_bts): ...this.
5834 * btrace.h (parse_xml_btrace): Update parameters.
5835 (make_cleanup_btrace_data): New.
5836 * common/btrace-common.c: New.
5837 * common/btrace-common.h: Include common-defs.h.
5838 (btrace_block_s): Update comment.
5839 (btrace_format): New.
5840 (btrace_format_string): New.
5841 (btrace_data_bts): New.
5843 (btrace_data_init, btrace_data_fini, btrace_data_empty): New.
5844 * remote.c (remote_read_btrace): Update parameters.
5845 * target.c (target_read_btrace): Update parameters.
5846 * target.h (target_read_btrace): Update parameters.
5847 (target_ops)<to_read_btrace>: Update parameters.
5848 * x86-linux-nat.c (x86_linux_read_btrace): Update parameters.
5849 * target-delegates.c: Regenerate.
5850 * target-debug (target_debug_print_struct_btrace_data_p): New.
5851 * nat/linux-btrace.c (linux_read_btrace): Split into this and...
5852 (linux_read_bts): ...this.
5853 * nat/linux-btrace.h (linux_read_btrace): Update parameters.
5855 2015-02-06 Doug Evans <dje@google.com>
5857 * remote-m32r-sdi.c: Include symfile.h.
5859 2015-02-06 Doug Evans <dje@google.com>
5861 * symtab.h (clear_symtab_users, deduce_language_from_filename): Move
5862 * symfile.h (clear_symtab_users, deduce_language_from_filename): ...
5865 2015-02-06 Pedro Alves <palves@redhat.com>
5867 * linux-thread-db.c (find_new_threads_callback): Add debug output.
5869 2015-02-06 Simon Marchi <simon.marchi@ericsson.com>
5872 * breakpoint.c (map_breakpoint_numbers): Check for empty args string.
5873 (enable_count_command): Check args for NULL value.
5875 2015-02-05 Doug Evans <xdje42@gmail.com>
5877 * guile/scm-frame.c: Fix spelling errors in a comment.
5879 2015-02-04 Jan Kratochvil <jan.kratochvil@redhat.com>
5881 * python/python-internal.h (Py_hash_t): Define it for Python <3.2.
5882 * python/py-value.c (valpy_fetch_lazy): Use it. Remove cast to the
5885 2015-02-04 Pedro Alves <palves@redhat.com>
5887 * linux-nat.c (handle_extended_wait): Don't resume LWPs here.
5888 (wait_lwp): Don't call wait_lwp if linux_handle_extended_wait
5890 (resume_stopped_resumed_lwps): Don't check whether the thread is
5891 marked as executing.
5892 (linux_nat_wait_1): Use resume_stopped_resumed_lwps.
5894 2015-02-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
5896 * regset.h (struct regset): Add flags field.
5897 (REGSET_VARIABLE_SIZE): New value for a regset's flags field.
5898 * corelow.c (get_core_register_section): Add warning if the size
5899 exceeds the requested size and the regset does not have the
5900 REGSET_VARIABLE_SIZE flag set.
5901 * alphanbsd-tdep.c (alphanbsd_gregset): Add REGSET_VARIABLE_SIZE
5903 * armbsd-tdep.c (armbsd_gregset): Likewise.
5904 * hppa-hpux-tdep.c (hppa_hpux_regset): Likewise.
5905 * hppaobsd-tdep.c (hppaobsd_gregset): Likewise.
5906 * m68kbsd-tdep.c (m68kbsd_gregset): Likewise.
5907 * mipsnbsd-tdep.c (mipsnbsd_gregset): Likewise.
5909 2015-02-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
5911 * amd64-linux-tdep.c (amd64_linux_iterate_over_regset_sections):
5912 For ".reg-xstate", explicitly specify the requested section size
5913 via X86_XSTATE_SIZE instead of just 0 on input and
5914 X86_XSTATE_MAX_SIZE on output.
5915 * i386-linux-tdep.c (i386_linux_iterate_over_regset_sections):
5918 2015-02-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
5921 * gdbarch.sh (iterate_over_regset_sections_cb): Document this
5922 function type, particularly its SIZE parameter.
5923 * gdbarch.h: Regenerate.
5924 * amd64-tdep.c (amd64_supply_fpregset): In gdb_assert, compare
5925 actual against required size using ">=" instead of "==".
5926 (amd64_collect_fpregset): Likewise.
5927 * i386-tdep.c (i386_supply_gregset): Likewise.
5928 (i386_collect_gregset): Likewise.
5929 (i386_supply_fpregset): Likewise.
5930 (i386_collect_fpregset): Likewise.
5931 * mips-linux-tdep.c (mips_supply_gregset_wrapper): Likewise.
5932 (mips_fill_gregset_wrapper): Likewise.
5933 (mips_supply_fpregset_wrapper): Likewise.
5934 (mips_fill_fpregset_wrapper): Likewise.
5935 (mips64_supply_gregset_wrapper): Likewise.
5936 (mips64_fill_gregset_wrapper): Likewise.
5937 (mips64_supply_fpregset_wrapper): Likewise.
5938 (mips64_fill_fpregset_wrapper): Likewise.
5939 * mn10300-linux-tdep.c (am33_supply_gregset_method): Likewise.
5940 (am33_supply_fpregset_method): Likewise.
5941 (am33_collect_gregset_method): Likewise.
5942 (am33_collect_fpregset_method): Likewise.
5944 2015-02-04 Doug Evans <dje@google.com>
5945 Pedro Alves <palves@redhat.com>
5946 Eli Zaretskii <eliz@gnu.org>
5949 * tui/tui-command.c (tui_refresh_cmd_win): New function.
5950 * tui/tui-command.c (tui_refresh_cmd_win): Declare.
5951 * tui/tui-file.c: #include tui/tui-command.h.
5952 (tui_file_fputs): Refresh command window if stream is not gdb_stdout.
5953 (tui_file_flush): Refresh command window if stream is gdb_stdout.
5954 * tui/tui-io.c (tui_puts): Remove calls to wrefresh, fflush.
5956 2015-02-04 Pedro Alves <palves@redhat.com>
5959 * event-loop.c (gdb_do_one_event): Add default switch case.
5961 2015-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
5963 Filter out inferior gcc option -fpreprocessed.
5964 * compile/compile.c (filter_args): New function.
5967 2015-02-03 Pedro Alves <palves@redhat.com>
5969 * event-loop.c: Don't declare nor define a queue type for
5971 (event_queue): Delete.
5972 (create_event, create_file_event, gdb_event_xfree)
5973 (initialize_event_loop, process_event): Delete.
5974 (gdb_do_one_event): Return as soon as one event is handled.
5975 (handle_file_event): Change prototype. Used the passed in
5976 file_handler pointer and ready_mask instead of looping over all
5978 (gdb_wait_for_event): Update the poll/select timeouts before
5979 blocking. Run event handlers directly instead of queueing events.
5980 Return as soon as one event is handled.
5981 (struct async_event_handler_data): Delete.
5982 (invoke_async_event_handler): Delete.
5983 (check_async_event_handlers): Change return type to int. Run
5984 event handlers directly instead of queueing events. Return as
5985 soon as one event is handled.
5986 (handle_timer_event): Delete.
5987 (update_wait_timeout): New function, factored out from
5989 (poll_timers): Reimplement.
5990 * event-loop.h (initialize_event_loop): Delete declaration.
5991 * top.c (gdb_init): Don't call initialize_event_loop.
5993 2015-02-03 Pedro Alves <palves@redhat.com>
5995 * event-loop.c (clear_async_event_handler): New function.
5996 * event-loop.h (clear_async_event_handler): New declaration.
5997 * record-btrace.c (record_btrace_async): New function.
5998 (init_record_btrace_ops): Install record_btrace_async.
5999 * record-full.c (record_full_async): New function.
6000 (record_full_resume): Don't mark the async event source here.
6001 (init_record_full_ops): Install record_full_async.
6002 (record_full_core_resume): Don't mark the async event source here.
6003 (init_record_full_core_ops): Install record_full_async.
6004 * remote.c (remote_async): Mark and clear the async stop reply
6005 queue event-loop token as appropriate.
6007 2015-02-03 Pedro Alves <palves@redhat.com>
6009 * linux-nat.c (linux_child_follow_fork, linux_nat_wait_1): Use
6010 target_is_async_p instead of target_can_async.
6011 (linux_nat_wait): Use target_is_async_p instead of
6012 target_can_async. Don't enable async here.
6013 * remote.c (interrupt_query, remote_wait, putpkt_binary): Use
6014 target_is_async_p instead of target_can_async.
6016 2015-02-02 Simon Marchi <simon.marchi@ericsson.com>
6018 * varobj.h (lang_varobj_ops): Mention which return values need
6021 2015-02-02 Joel Brobecker <brobecker@adacore.com>
6023 * dwarf2loc.c (dwarf2_evaluate_property): Add i18n marker.
6025 2015-02-02 Joel Brobecker <brobecker@adacore.com>
6028 * ada-lang.c (ada_lookup_symbol_list_worker): Do not re-cache
6029 results found in the cache.
6031 2015-02-02 Joel Brobecker <brobecker@adacore.com>
6034 * ada-lang.c (ada_get_symbol_cache): Set pspace_data->sym_cache
6035 when allocating a new one.
6037 2015-02-01 Tom Tromey <tom@tromey.com>
6039 * MAINTAINERS: Remove myself.
6041 2015-01-31 Doug Evans <xdje42@gmail.com>
6043 * dwarf2read.c (process_structure_scope): Update setting of
6044 TYPE_VPTR_BASETYPE, TYPE_VPTR_FIELDNO.
6045 * gdbtypes.c (internal_type_vptr_fieldno): New function.
6046 (set_type_vptr_fieldno): New function.
6047 (internal_type_vptr_basetype): New function.
6048 (set_type_vptr_basetype): New function.
6049 (get_vptr_fieldno): Update setting of TYPE_VPTR_FIELDNO,
6051 (allocate_cplus_struct_type): Initialize vptr_fieldno.
6052 (recursive_dump_type): Printing of vptr_fieldno, vptr_basetype ...
6053 (print_cplus_stuff): ... moved here.
6054 (copy_type_recursive): Don't copy TYPE_VPTR_BASETYPE.
6055 * gdbtypes.h (struct main_type): Members vptr_fieldno, vptr_basetype
6057 (struct cplus_struct_type): ... here. All uses updated.
6058 (TYPE_VPTR_FIELDNO, TYPE_VPTR_BASETYPE): Rewrite.
6059 (internal_type_vptr_fieldno, set_type_vptr_fieldno): Declare.
6060 (internal_type_vptr_basetype, set_type_vptr_basetype): Declare.
6061 * stabsread.c (read_tilde_fields): Update setting of
6062 TYPE_VPTR_FIELDNO, TYPE_VPTR_BASETYPE.
6064 2015-01-31 Doug Evans <xdje42@gmail.com>
6066 * cp-valprint.c (cp_find_class_member): Rename parameter domain_p
6068 (cp_print_class_member): Rename local domain to self_type.
6069 * dwarf2read.c (quirk_gcc_member_function_pointer): Rename local
6070 domain_type to self_type.
6071 (set_die_type) <need_gnat_info>: Handle
6072 TYPE_CODE_METHODPTR, TYPE_CODE_MEMBERPTR, TYPE_CODE_METHOD.
6073 * gdb-gdb.py (StructMainTypePrettyPrinter): Handle
6074 TYPE_SPECIFIC_SELF_TYPE.
6075 * gdbtypes.c (internal_type_self_type): New function.
6076 (set_type_self_type): New function.
6077 (smash_to_memberptr_type): Rename parameter domain to self_type.
6078 Update setting of TYPE_SELF_TYPE.
6079 (smash_to_methodptr_type): Update setting of TYPE_SELF_TYPE.
6080 (smash_to_method_type): Rename parameter domain to self_type.
6081 Update setting of TYPE_SELF_TYPE.
6082 (check_stub_method): Call smash_to_method_type.
6083 (recursive_dump_type): Handle TYPE_SPECIFIC_SELF_TYPE.
6084 (copy_type_recursive): Ditto.
6085 * gdbtypes.h (enum type_specific_kind): New value
6086 TYPE_SPECIFIC_SELF_TYPE.
6087 (struct main_type) <type_specific>: New member self_type.
6088 (struct cplus_struct_type) <fn_field.type>: Update comment.
6089 (TYPE_SELF_TYPE): Rewrite.
6090 (internal_type_self_type, set_type_self_type): Declare.
6091 * gnu-v3-abi.c (gnuv3_print_method_ptr): Rename local domain to
6093 (gnuv3_method_ptr_to_value): Rename local domain_type to self_type.
6094 * m2-typeprint.c (m2_range): Replace TYPE_SELF_TYPE with
6096 * stabsread.c (read_member_functions): Mark methods with
6097 TYPE_CODE_METHOD, not TYPE_CODE_FUNC. Update setting of
6100 2015-01-31 Doug Evans <xdje42@gmail.com>
6102 * gdbtypes.h (TYPE_SELF_TYPE): Renamed from TYPE_DOMAIN_TYPE.
6105 2015-01-31 Doug Evans <xdje42@gmail.com>
6107 * gnu-v3-abi.c (gnuv3_dynamic_class): Assert only passed structs
6108 or unions. Return zero if union.
6109 (gnuv3_get_vtable): Call check_typedef. Assert only passed structs.
6110 (gnuv3_rtti_type): Pass already-check_typedef'd value to
6112 (compute_vtable_size): Assert only passed structs.
6113 (gnuv3_print_vtable): Don't call gnuv3_get_vtable for non-structs.
6115 2015-01-31 Doug Evans <xdje42@gmail.com>
6117 * gdbtypes.c (copy_type_recursive): Handle all TYPE_SPECIFIC_FIELD
6120 2015-01-31 Gary Benson <gbenson@redhat.com>
6121 Doug Evans <dje@google.com>
6126 * cli/cli-cmds.c (complete_command): Notify user if max-completions
6128 * common/common-exceptions.h (enum errors)
6129 <MAX_COMPLETIONS_REACHED_ERROR>: New value.
6130 * completer.h (get_max_completions_reached_message): New declaration.
6131 (max_completions): Likewise.
6132 (completion_tracker_t): New typedef.
6133 (new_completion_tracker): New declaration.
6134 (make_cleanup_free_completion_tracker): Likewise.
6135 (maybe_add_completion_enum): New enum.
6136 (maybe_add_completion): New declaration.
6137 (throw_max_completions_reached_error): Likewise.
6138 * completer.c (max_completions): New global variable.
6139 (new_completion_tracker): New function.
6140 (free_completion_tracker): Likewise.
6141 (make_cleanup_free_completion_tracker): Likewise.
6142 (maybe_add_completions): Likewise.
6143 (throw_max_completions_reached_error): Likewise.
6144 (complete_line): Remove duplicates and limit result to max_completions
6146 (get_max_completions_reached_message): New function.
6147 (gdb_display_match_list): Handle max_completions.
6148 (_initialize_completer): New declaration and function.
6149 * symtab.c: Include completer.h.
6150 (completion_tracker): New static variable.
6151 (completion_list_add_name): Call maybe_add_completion.
6152 (default_make_symbol_completion_list_break_on_1): Renamed from
6153 default_make_symbol_completion_list_break_on. Maintain
6154 completion_tracker across calls to completion_list_add_name.
6155 (default_make_symbol_completion_list_break_on): New function.
6156 * top.c (init_main): Set rl_completion_display_matches_hook.
6157 * tui/tui-io.c: Include completer.h.
6158 (tui_old_rl_display_matches_hook): New static global.
6159 (tui_rl_display_match_list): Notify user if max-completions reached.
6160 (tui_setup_io): Save/restore rl_completion_display_matches_hook.
6161 * NEWS (New Options): Mention set/show max-completions.
6163 2015-01-31 Gary Benson <gbenson@redhat.com>
6165 * symtab.c (struct add_name_data) <code>: New field.
6167 (add_symtab_completions): New function.
6168 (symtab_expansion_callback): Likewise.
6169 (default_make_symbol_completion_list_break_on): Set datum.code.
6170 Move minimal symbol scan before calling expand_symtabs_matching.
6171 Scan known primary symtabs for externs and statics before calling
6172 expand_symtabs_matching. Pass symtab_expansion_callback as
6173 expansion_notify argument to expand_symtabs_matching. Do not scan
6174 primary symtabs for externs and statics after calling
6175 expand_symtabs_matching.
6177 2015-01-31 Gary Benson <gbenson@redhat.com>
6179 * symfile.h (expand_symtabs_exp_notify_ftype): New typedef.
6180 (struct quick_symbol_functions) <expand_symtabs_matching>:
6181 New argument expansion_notify. All uses updated.
6182 (expand_symtabs_matching): New argument expansion_notify.
6184 * symfile-debug.c (debug_qf_expand_symtabs_matching):
6185 Also print expansion notify.
6186 * symtab.c (expand_symtabs_matching_via_partial): Call
6187 expansion_notify whenever a partial symbol table is expanded.
6188 * dwarf2read.c (dw2_expand_symtabs_matching): Call
6189 expansion_notify whenever a symbol table is instantiated.
6191 2015-01-31 Doug Evans <xdje42@gmail.com>
6193 * cli-out.c: #include completer.h, readline/readline.h.
6194 (cli_mld_crlf, cli_mld_putch, cli_mld_puts): New functions.
6195 (cli_mld_flush, cld_mld_erase_entire_line): Ditto.
6196 (cli_mld_beep, cli_mld_read_key, cli_display_match_list): Ditto.
6197 * cli-out.h (cli_display_match_list): Declare.
6198 * completer.c (MB_INVALIDCH, MB_NULLWCH): New macros.
6199 (ELLIPSIS_LEN): Ditto.
6200 (gdb_get_y_or_n, gdb_display_match_list_pager): New functions.
6201 (gdb_path_isdir, gdb_printable_part, gdb_fnwidth): Ditto.
6202 (gdb_fnprint, gdb_print_filename): Ditto.
6203 (gdb_complete_get_screenwidth, gdb_display_match_list_1): Ditto.
6204 (gdb_display_match_list): Ditto.
6205 * completer.h (mld_crlf_ftype, mld_putch_ftype): New typedefs.
6206 (mld_puts_ftype, mld_flush_ftype, mld_erase_entire_line_ftype): Ditto.
6207 (mld_beep_ftype, mld_read_key_ftype): Ditto.
6208 (match_list_displayer): New struct.
6209 (gdb_display_match_list): Declare.
6210 * top.c (init_main): Set rl_completion_display_matches_hook.
6211 * tui/tui-io.c: #include completer.h.
6212 (printable_part, PUTX, print_filename, get_y_or_n): Delete.
6213 (tui_mld_crlf, tui_mld_putch, tui_mld_puts): New functions.
6214 (tui_mld_flush, tui_mld_erase_entire_line, tui_mld_beep): Ditto.
6215 (tui_mld_getc, tui_mld_read_key): Ditto.
6216 (tui_rl_display_match_list): Rewrite.
6217 (tui_handle_resize_during_io): New arg for_completion. All callers
6220 2015-01-31 Doug Evans <xdje42@gmail.com>
6222 Add symbol lookup cache.
6223 * NEWS: Document new options and commands.
6224 * symtab.c (symbol_cache_key): New static global.
6225 (DEFAULT_SYMBOL_CACHE_SIZE, MAX_SYMBOL_CACHE_SIZE): New macros.
6226 (SYMBOL_LOOKUP_FAILED): New macro.
6227 (symbol_cache_slot_state): New enum.
6228 (block_symbol_cache): New struct.
6229 (symbol_cache): New struct.
6230 (new_symbol_cache_size, symbol_cache_size): New static globals.
6231 (hash_symbol_entry, eq_symbol_entry): New functions.
6232 (symbol_cache_byte_size, resize_symbol_cache): New functions.
6233 (make_symbol_cache, free_symbol_cache): New functions.
6234 (get_symbol_cache, symbol_cache_cleanup): New function.
6235 (set_symbol_cache_size, set_symbol_cache_size_handler): New functions.
6236 (symbol_cache_lookup, symbol_cache_clear_slot): New function.
6237 (symbol_cache_mark_found, symbol_cache_mark_not_found): New functions.
6238 (symbol_cache_flush, symbol_cache_dump): New functions.
6239 (maintenance_print_symbol_cache): New function.
6240 (maintenance_flush_symbol_cache): New function.
6241 (symbol_cache_stats): New function.
6242 (maintenance_print_symbol_cache_statistics): New function.
6243 (symtab_new_objfile_observer): New function.
6244 (symtab_free_objfile_observer): New function.
6245 (lookup_static_symbol, lookup_global_symbol): Use symbol cache.
6246 (_initialize_symtab): Init symbol_cache_key. New parameter
6247 maint symbol-cache-size. New maint commands print symbol-cache,
6248 print symbol-cache-statistics, flush-symbol-cache.
6249 Install new_objfile, free_objfile observers.
6251 2015-01-31 Joel Brobecker <brobecker@adacore.com>
6254 * symfile.c (clear_symtab_users): Move call to breakpoint_re_set
6257 2015-01-31 Doug Evans <xdje42@gmail.com>
6259 * NEWS: Mention inlined scripts in .debug_gdb_scripts section.
6260 * auto-load.c: #include ctype.h.
6261 (struct auto_load_pspace_info): Replace member loaded_scripts with
6262 new members loaded_script_files, loaded_script_texts.
6263 (auto_load_pspace_data_cleanup): Update.
6264 (init_loaded_scripts_info): Update.
6265 (get_auto_load_pspace_data_for_loading): Update.
6266 (maybe_add_script_file): Renamed from maybe_add_script. All callers
6268 (maybe_add_script_text): New function.
6269 (clear_section_scripts): Update.
6270 (source_script_file, execute_script_contents): New functions.
6271 (source_section_scripts): Add support for
6272 SECTION_SCRIPT_ID_PYTHON_TEXT, SECTION_SCRIPT_ID_GUILE_TEXT.
6273 (print_scripts): New function.
6274 (auto_load_info_scripts): Also print inlined scripts.
6275 (maybe_print_unsupported_script_warning): Renamed from
6276 unsupported_script_warning_print. All callers updated.
6277 (maybe_print_script_not_found_warning): Renamed from
6278 script_not_found_warning_print. All callers updated.
6279 * extension-priv.h (struct extension_language_script_ops): New member
6280 objfile_script_executor.
6281 * extension.c (ext_lang_objfile_script_executor): New function.
6282 * extension.h (objfile_script_executor_func): New typedef.
6283 (ext_lang_objfile_script_executor): Declare.
6284 * guile/guile-internal.h (gdbscm_execute_objfile_script): Declare.
6285 * guile/guile.c (guile_extension_script_ops): Update.
6286 * guile/scm-objfile.c (gdbscm_execute_objfile_script): New function.
6287 * python/python.c (python_extension_script_ops): Update.
6288 (gdbpy_execute_objfile_script): New function.
6290 2015-01-31 Eli Zaretskii <eliz@gnu.org>
6292 * tui/tui-io.c (tui_expand_tabs): New function.
6293 (tui_puts, tui_redisplay_readline): Expand TABs into the
6294 appropriate number of spaces.
6295 * tui/tui-regs.c: Include tui-io.h.
6296 (tui_register_format): Call tui_expand_tabs to expand TABs into
6297 the appropriate number of spaces.
6298 * tui/tui-io.h: Add prototype for tui_expand_tabs.
6300 2015-01-30 Doug Evans <dje@google.com>
6302 * NEWS: "info source" command now display producer string if present.
6303 * source.c (source_info): Print producer string if present.
6305 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
6307 * varobj.c (varobj_delete): Fix comment.
6309 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
6311 * varobj.c (create_child): Modify comment.
6313 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
6315 * ada-varobj.c (ada_number_of_children): Constify struct varobj *
6317 (ada_name_of_variable): Same.
6318 (ada_path_expr_of_child): Same.
6319 (ada_value_of_variable): Same.
6320 (ada_value_is_changeable_p): Same.
6321 (ada_value_has_mutated): Same.
6322 * c-varobj.c (varobj_is_anonymous_child): Same.
6323 (c_is_path_expr_parent): Same.
6324 (c_number_of_children): Same.
6325 (c_name_of_variable): Same.
6326 (c_path_expr_of_child): Same.
6328 (c_value_of_variable): Same.
6329 (cplus_number_of_children): Same.
6330 (cplus_name_of_variable): Same.
6331 (cplus_path_expr_of_child): Same.
6332 (cplus_value_of_variable): Same.
6333 * jv-varobj.c (java_number_of_children): Same.
6334 (java_name_of_variable): Same.
6335 (java_path_expr_of_child): Same.
6336 (java_value_of_variable): Same.
6337 * varobj.c (number_of_children): Same.
6338 (name_of_variable): Same.
6340 (varobj_ensure_python_env): Same.
6341 (varobj_get_objname): Same.
6342 (varobj_get_expression): Same.
6343 (varobj_get_display_format): Same.
6344 (varobj_get_display_hint): Same.
6345 (varobj_has_more): Same.
6346 (varobj_get_thread_id): Same.
6347 (varobj_get_frozen): Same.
6348 (dynamic_varobj_has_child_method): Same.
6349 (varobj_get_gdb_type): Same.
6350 (is_path_expr_parent): Same.
6351 (varobj_default_is_path_expr_parent): Same.
6352 (varobj_get_language): Same.
6353 (varobj_get_attributes): Same.
6354 (varobj_is_dynamic_p): Same.
6355 (varobj_get_child_range): Same.
6356 (varobj_value_has_mutated): Same.
6357 (varobj_get_value_type): Same.
6358 (number_of_children): Same.
6359 (name_of_variable): Same.
6360 (check_scope): Same.
6361 (varobj_editable_p): Same.
6362 (varobj_value_is_changeable_p): Same.
6363 (varobj_floating_p): Same.
6364 (varobj_default_value_is_changeable_p): Same.
6366 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
6368 * varobj.c (varobj_get_path_expr): Set var->path_expr.
6369 * c-varobj.c (c_path_expr_of_child): Set local var instead of
6371 (cplus_path_expr_of_child): Same.
6373 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
6375 * mi-cmd-var.c (print_varobj): Free varobj_get_expression
6377 (mi_cmd_var_info_expression): Same.
6378 * varobj.c (varobj_get_expression): Mention in the comment that
6379 the result must by freed by the caller.
6381 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
6383 * mi/mi-cmd-var.c (mi_cmd_var_info_type): Free result of
6385 (varobj_update_one): Same.
6386 * varobj.c (update_type_if_necessary): Free curr_type_str and
6388 (varobj_get_type): Specify in comment that the result needs to be
6389 freed by the caller.
6391 2015-01-29 Doug Evans <dje@google.com>
6394 * dwarf2read.c (dwarf_decode_line_header): Punt if version > 4.
6396 2015-01-25 Mark Wielaard <mjw@redhat.com>
6398 * dwarf2read.c (checkproducer): Call producer_is_gcc.
6399 * utils.c (producer_is_gcc_ge_4): Likewise.
6400 (producer_is_gcc): New function.
6401 * utils.h (producer_is_gcc): New declaration.
6403 2015-01-29 Joel Brobecker <brobecker@adacore.com>
6405 * gdbtypes.h (struct dynamic_prop): New PROP_ADDR_OFFSET enum
6407 * gdbtypes.c (resolve_dynamic_type_internal): Replace "addr"
6408 parameter by "addr_stack" parameter.
6409 (resolve_dynamic_range): Replace "addr" parameter by
6410 "stack_addr" parameter. Update function documentation.
6411 Update code accordingly.
6412 (resolve_dynamic_array, resolve_dynamic_union)
6413 (resolve_dynamic_struct, resolve_dynamic_type_internal): Likewise.
6414 (resolve_dynamic_type): Update code, following the changes made
6415 to resolve_dynamic_type_internal's interface.
6416 * dwarf2loc.h (struct property_addr_info): New.
6417 (dwarf2_evaluate_property): Replace "address" parameter
6418 by "addr_stack" parameter. Adjust function documentation.
6419 (struct dwarf2_offset_baton): New.
6420 (struct dwarf2_property_baton): Update documentation of
6421 field "referenced_type" to be more general. New field
6422 "offset_info" in union data field.
6423 * dwarf2loc.c (dwarf2_evaluate_property): Replace "address"
6424 parameter by "addr_stack" parameter. Adjust code accordingly.
6425 Add support for PROP_ADDR_OFFSET properties.
6426 * dwarf2read.c (attr_to_dynamic_prop): Add support for
6427 DW_AT_data_member_location attributes as well. Use case
6428 statements instead of if/else condition.
6430 2015-01-29 Joel Brobecker <brobecker@adacore.com>
6432 * ada-varobj.c (ada_varobj_get_array_number_of_children):
6433 Return zero if PARENT_VALUE is NULL and parent_type's
6434 range type is dynamic.
6436 2015-01-29 Joel Brobecker <brobecker@adacore.com>
6438 * gdbtypes.c (is_dynamic_type_internal) <TYPE_CODE_RANGE>: Return
6439 nonzero if the type's subtype is dynamic.
6440 (resolve_dynamic_range): Also resolve the range's subtype.
6442 2015-01-29 Alexander Klimov <alserkli@inbox.ru> (tiny patch)
6444 Pushed by Joel Brobecker <brobecker@adacore.com>.
6445 * symfile.c (unmap_overlay_command): Initialize sec to NULL.
6447 2015-01-27 Doug Evans <dje@google.com>
6449 * NEWS: Mention gdb.Objfile.username.
6450 * python/py-objfile.c (objfpy_get_username): New function.
6451 (objfile_getset): Add "username".
6453 2015-01-24 Mark Wielaard <mjw@redhat.com>
6455 * stack.c (return_command): Markup warning message with _.
6457 2015-01-24 Doug Evans <xdje42@gmail.com>
6459 * gdbtypes.h (TYPE_TYPE_SPECIFIC): Delete.
6461 2015-01-24 Jan Kratochvil <jan.kratochvil@redhat.com>
6463 Fix 100x slowdown regression on DWZ files.
6464 * dwarf2read.c (struct dwarf2_per_objfile): Add line_header_hash.
6465 (struct line_header): Add offset and offset_in_dwz.
6466 (dwarf_decode_lines): Add parameter decode_mapping to the declaration.
6467 (free_line_header_voidp): New declaration.
6468 (line_header_hash, line_header_hash_voidp, line_header_eq_voidp): New
6470 (dwarf2_build_include_psymtabs): Update dwarf_decode_lines caller.
6471 (handle_DW_AT_stmt_list): Use line_header_hash.
6472 (free_line_header_voidp): New function.
6473 (dwarf_decode_line_header): Initialize offset and offset_in_dwz.
6474 (dwarf_decode_lines): New parameter decode_mapping, use it.
6475 (dwarf2_free_objfile): Free line_header_hash.
6477 2015-01-23 Simon Marchi <simon.marchi@ericsson.com>
6480 * valops.c (value_rtti_indirect_type): Catch exception thrown by
6483 2015-01-15 Mark Wielaard <mjw@redhat.com>
6485 * dwarf2read.c (read_subroutine_type): Set TYPE_NO_RETURN from
6487 * gdbtypes.h (struct func_type): Add is_noreturn field flag. Make
6488 calling_convention an 8 bit bit field.
6489 (TYPE_NO_RETURN): New macro.
6490 * infcmd.c (finish_command): Query if function does not return
6492 * stack.c (return_command): Likewise.
6494 2015-01-23 Pedro Alves <palves@redhat.com>
6496 * linux-nat.c (linux_is_async_p): New macro.
6497 (linux_nat_is_async_p):
6498 (linux_nat_terminal_inferior): Check whether the target can async
6499 instead of whether it is already async.
6500 (linux_nat_terminal_ours): Don't check whether the target is
6502 (linux_async_pipe): Use linux_is_async_p.
6504 2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
6506 * NEWS (Changes since GDB 7.9): Add 'thread apply all' option
6508 * thread.c (tp_array_compar_ascending, tp_array_compar): New.
6509 (thread_apply_all_command): Parse CMD for tp_array_compar_ascending.
6510 Sort tp_array using tp_array_compar.
6511 (_initialize_thread): Extend thread_apply_all_command help.
6513 2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
6515 * corelow.c (core_open): Call also thread_command.
6516 * gdbthread.h (thread_command): New prototype moved from ...
6517 * thread.c (thread_command): ... here.
6518 (thread_command): Make it global.
6520 2015-01-22 Pedro Alves <palves@redhat.com>
6522 * configure.ac [*mingw32*]: Check $curses_found instead of
6524 * configure: Regenerate.
6525 * windows-termcap.c: Remove HAVE_CURSES_H, HAVE_NCURSES_H and
6526 HAVE_NCURSES_NCURSES_H checks.
6528 2015-01-22 Eli Zaretskii <eliz@gnu.org>
6530 * tui/tui.c (tui_enable) [__MINGW32__]: If the call to 'newterm'
6531 fails with the 1st arg NULL, try again with "unknown". Don't test
6532 the "cup" capability: it isn't supported by the Windows port of
6533 ncurses, but the Windows console driver is still capable of
6536 2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
6538 * compile/compile.c (_initialize_compile): Use -fPIE for compile_args.
6540 2015-01-22 Eli Zaretskii <eliz@gnu.org>
6542 * Makefile.in (HFILES_NO_SRCDIR): Remove ada-varobj.h.
6543 (ALLDEPFILES): Remove irix5-nat.c. These two are part of the
6544 reason that "make TAGS" is broken.
6546 2015-01-22 Chen Gang <gang.chen.5i5j@gmail.com>
6548 * hppa-tdep.c (inst_saves_gr): Fix logical working flow issues
6549 and check additional store instructions.
6551 2015-01-21 Wei-cheng Wang <cole945@gmail.com>
6553 * MAINTAINERS (Write After Approval): Add "Wei-cheng Wang".
6555 2015-01-21 Wei-cheng Wang <cole945@gmail.com>
6557 * ppc-linux-tdep.c (ppc_skip_trampoline_code,
6558 ppc_canonicalize_syscall, ppc_linux_syscall_record,
6559 ppc_linux_record_signal, ppc_init_linux_record_tdep): Add comments.
6560 * ppc64-tdep.c (ppc64_skip_trampoline_code): Likewise.
6561 * rs6000-tdep.c (rs6000_epilogue_frame_cache,
6562 rs6000_epilogue_frame_this_id, rs6000_epilogue_frame_prev_register,
6563 rs6000_epilogue_frame_sniffer, ppc_record_vsr, ppc_process_record_op4,
6564 ppc_process_record_op19, ppc_process_record_op31,
6565 ppc_process_record_op59, ppc_process_record_op60,
6566 ppc_process_record_op63): Likewise.
6568 2015-01-20 Joel Brobecker <brobecker@adacore.com>
6570 * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason_string)
6571 (linux_ptrace_test_ret_to_nx): Use safe_strerror instead of
6574 2015-01-20 Wei-cheng Wang <cole945@gmail.com>
6576 * rs6000-tdep.c (ppc_process_record_op4, ppc_process_record_op19,
6577 ppc_process_record_op31, ppc_process_record_op59,
6578 ppc_process_record_op60, ppc_process_record_op63,
6579 ppc_process_record): Fix -Wformat warning.
6580 * rs6000-tdep.c (rs6000_epilogue_frame_cache, ppc_process_record_op60):
6581 Remove unused variables.
6583 2015-01-20 Chen Gang <gang.chen.5i5j@gmail.com>
6585 * MAINTAINERS (Write After Approval): Add "Chen Gang".
6587 2015-01-19 Eli Zaretskii <eliz@gnu.org>
6589 * configure.ac [*mingw32*]: Only add windows-termcap.o to
6590 CONFIG_OBS if not building with a curses library.
6591 * configure: Regenerate.
6593 * windows-termcap.c: Include defs.h. Make the whole body empty if
6594 either one of HAVE_CURSES_H or HAVE_NCURSES_H or
6595 HAVE_NCURSES_NCURSES_H is defined.
6597 2015-01-19 Joel Brobecker <brobecker@adacore.com>
6599 * rs6000-tdep.c (rs6000_gdbarch_init): Move divide operator
6600 from end of line to start of next line.
6602 2015-01-17 Wei-cheng Wang <cole945@gmail.com>
6604 * ppc-linux-tdep.c (ppc_skip_trampoline_code):
6605 Scan PLT stub backward for reverse debugging.
6606 * ppc64-tdep.c (ppc64_skip_trampoline_code): Likewise.
6608 2015-01-17 Wei-cheng Wang <cole945@gmail.com>
6609 Ulrich Weigand <uweigand@de.ibm.com>
6611 * configure.tgt (powerpc*-*-linux): Add linux-record.o to
6613 (ppc_linux_record_tdep, ppc64_linux_record_tdep): New for linux syscall
6615 (ppc_canonicalize_syscall, ppc_linux_syscall_record,
6616 ppc_linux_record_signal, ppc_init_linux_record_tdep): New functions.
6617 (ppc_linux_init_abi): Set process_record, process_record_signal.
6618 * ppc-tdep.h (struct gdbarch_tdep): Add ppc_syscall_record and
6619 ppc_linux_record_tdep to gdbarch_tdep.
6620 (ppc_process_record): New declaration.
6621 * rs6000-tdep.c (ppc_record_vsr, ppc_process_record_op4,
6622 ppc_process_record_op19, ppc_process_record_op31,
6623 ppc_process_record_op59, ppc_process_record_op60,
6624 ppc_process_record_op63, ppc_process_record): New functions.
6626 2015-01-17 Wei-cheng Wang <cole945@gmail.com>
6628 * rs6000-tdep.c (rs6000_in_function_epilogue_p): Rename to
6629 rs6000_in_function_epilogue_frame_p and add an argument
6631 (rs6000_epilogue_frame_cache, rs6000_epilogue_frame_this_id,
6632 rs6000_epilogue_frame_prev_register, rs6000_epilogue_frame_sniffer):
6634 (rs6000_epilogue_frame_unwind): New.
6635 (rs6000_gdbarch_init): Append epilogue unwinder.
6637 2015-01-16 Sergio Durigan Junior <sergiodj@redhat.com>
6639 * nat/linux-personality.c: Replace "#ifndef
6640 HAVE_DECL_ADDR_NO_RANDOMIZE" by "#if
6641 !HAVE_DECL_ADDR_NO_RANDOMIZE", fixing a regression in RHEL-5
6644 2015-01-16 Eli Zaretskii <eliz@gnu.org>
6646 * tui/tui-win.c (tui_rehighlight_all, tui_set_var_cmd): New
6648 (_initialize_tui_win) <border-kind, border-mode>:
6649 <active-border-mode>: Use tui_set_var_cmd as the "set" function.
6650 (tui_set_tab_width_command): Fix the commentary.
6652 * tui/tui-win.h: Add prototype for tui_rehighlight_all.
6654 * tui/tui-win.c (tui_scroll_left_command, tui_scroll_right_command):
6656 (tui_set_tab_width_command): Delete and recreate the source and
6657 the disassembly windows, to show the effect of the changed tab
6660 * tui/tui-data.h (LINE_PREFIX): Make shorter
6661 (MAX_PID_WIDTH): Enlarge from 14 to 19, to leave enough space for
6662 "Thread NNNNN.XXXX" thread ID notation on Windows.
6664 2015-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
6666 Fix gcc-5 compilation.
6667 * hppa-tdep.c (inst_saves_gr): Fix parentheses typo.
6669 2015-01-15 Sergio Durigan Junior <sergiodj@redhat.com>
6671 * Makefile.in (HFILES_NO_SRCDIR): Add nat/linux-personality.h.
6672 (linux-personality.o): New rule.
6673 * common/common-defs.h: Include <stdint.h>.
6674 * config/aarch64/linux.mh (NATDEPFILES): Include
6675 linux-personality.o.
6676 * config/alpha/alpha-linux.mh (NATDEPFILES): Likewise.
6677 * config/arm/linux.mh (NATDEPFILES): Likewise.
6678 * config/i386/linux64.mh (NATDEPFILES): Likewise.
6679 * config/i386/linux.mh (NATDEPFILES): Likewise.
6680 * config/ia64/linux.mh (NATDEPFILES): Likewise.
6681 * config/m32r/linux.mh (NATDEPFILES): Likewise.
6682 * config/m68k/linux.mh (NATDEPFILES): Likewise.
6683 * config/mips/linux.mh (NATDEPFILES): Likewise.
6684 * config/pa/linux.mh (NATDEPFILES): Likewise.
6685 * config/powerpc/linux.mh (NATDEPFILES): Likewise.
6686 * config/powerpc/ppc64-linux.mh (NATDEPFILES): Likewise.
6687 * config/powerpc/spu-linux.mh (NATDEPFILES): Likewise.
6688 * config/s390/linux.mh (NATDEPFILES): Likewise.
6689 * config/sparc/linux64.mh (NATDEPFILES): Likewise.
6690 * config/sparc/linux.mh (NATDEPFILES): Likewise.
6691 * config/tilegx/linux.mh (NATDEPFILES): Likewise.
6692 * config/xtensa/linux.mh (NATDEPFILES): Likewise.
6693 * defs.h: Remove #include <stdint.h> (moved to
6694 common/common-defs.h).
6695 * linux-nat.c: Include nat/linux-personality.h. Remove #include
6696 <sys/personality.h>; do not define ADDR_NO_RANDOMIZE (moved to
6697 nat/linux-personality.c).
6698 (linux_nat_create_inferior): Remove code to disable address space
6699 randomization (moved to nat/linux-personality.c). Create cleanup
6700 to disable address space randomization.
6701 * nat/linux-personality.c: New file.
6702 * nat/linux-personality.h: Likewise.
6704 2015-01-15 Sergio Durigan Junior <sergiodj@redhat.com>
6706 * Makefile.in (ALLDEPFILES): Including common/mingw-strerror.c and
6707 common/posix-strerror.c.
6708 (posix-strerror.o): New rule.
6709 (mingw-strerror.o): Likewise.
6710 * common/common-utils.h (safe_strerror): Move prototype to here,
6712 * common/common.host: New file.
6713 * common/mingw-strerror.c: Likewise.
6714 * common/posix-strerror.c: Likewise.
6715 * configure: Regenerated.
6716 * configure.ac: Source common/common.host. Add variable
6717 common_host_obs to gdb_host_obs.
6718 * contrib/ari/gdb_ari.sh: Mention gdb/common/mingw-strerror.c and
6719 gdb/common/posix-strerror.c when warning about the use of
6721 * mingw-hdep.c (safe_strerror): Remove definition; move it to
6722 common/mingw-strerror.c.
6723 * posix-hdep.c (safe_strerror): Remove definition; move it to
6724 common/posix-hdep.c.
6725 * utils.h (safe_strerror): Remove prototype; move to
6726 common/common-utils.h.
6728 2015-01-15 Joel Brobecker <brobecker@adacore.com>
6732 2015-01-15 Joel Brobecker <brobecker@adacore.com>
6734 * ada-lang.c (ada_array_bound_from_type): Ignore array's parallel
6735 ___XA type if the array has already been fixed.
6737 2015-01-14 Yao Qi <yao@codesourcery.com>
6739 * Makefile.in (ppc-linux.o): New rule.
6740 * config/powerpc/ppc64-linux.mh (NATDEPFILES): Add ppc-linux.o.
6741 * configure.ac: AC_CHECK_FUNCS(getauxval).
6742 * config.in: Re-generated.
6743 * configure: Re-generated.
6744 * nat/ppc-linux.h [__powerpc64__] (ppc64_64bit_inferior_p):
6746 * nat/ppc-linux.c: New file.
6747 * ppc-linux-nat.c (ppc_linux_target_wordsize) [__powerpc64__]:
6748 Call ppc64_64bit_inferior_p.
6750 2015-01-14 Yao Qi <yao@codesourcery.com>
6752 * ppc-linux-nat.c (PT_ORIG_R3, PT_TRAP): Move to
6754 (PPC_FEATURE_CELL, PPC_FEATURE_BOOKE): Likewise.
6755 (PPC_FEATURE_HAS_DFP): Likewise.
6756 (PTRACE_GETVRREGS, PTRACE_SETVRREGS): Likewise.
6757 (PTRACE_GETVSXREGS, PTRACE_SETVSXREGS): Likewise.
6758 (PTRACE_GETEVRREGS, PTRACE_SETEVRREGS): Likewise.
6759 Include "nat/ppc-linux.h".
6760 * nat/ppc-linux.h: New file.
6761 * Makefile.in (HFILES_NO_SRCDIR): Add nat/ppc-linux.h.
6763 2015-01-14 Pedro Alves <palves@redhat.com>
6766 * breakpoint.c: Include "interps.h".
6767 (bpstat_do_actions_1): Also check whether the interpreter is
6770 2015-01-14 Pedro Alves <palves@redhat.com>
6773 * infrun.c (reinstall_readline_callback_handler_cleanup): Don't
6774 reinstall if the interpreter is sync.
6776 2015-01-13 Doug Evans <dje@google.com>
6778 * objfiles.c (objfile_filename): New function.
6779 * objfiles.h (objfile_filename): Declare it.
6780 (objfile_name): Add function comment.
6781 * python/py-objfile.c (objfpy_lookup_objfile_by_name): Try both the
6782 bfd file name (which may be realpath'd), and the original name.
6784 2015-01-13 Joel Brobecker <brobecker@adacore.com>
6786 * NEWS: Create a new section for the next release branch.
6787 Rename the section of the current branch, now that it has
6790 2015-01-13 Joel Brobecker <brobecker@adacore.com>
6792 GDB 7.9 branch created (92fc2e6978d9a7c8324c7e851dbee59e22ec7a37):
6793 * version.in: Bump version to 7.9.50.DATE-cvs.
6795 2015-01-13 Joel Brobecker <brobecker@adacore.com>
6797 * nat/linux-procfs.c (linux_proc_attach_tgid_threads):
6798 Remove trailing new-line in argument of call to warning.
6800 2015-01-13 Joel Brobecker <brobecker@adacore.com>
6802 * linux-nat.c (attach_proc_task_lwp_callback): Remove trailing
6803 new-line in argument of call to "warning".
6805 2015-01-13 Joel Brobecker <brobecker@adacore.com>
6807 * ada-lang.c (ada_lookup_symbol_nonlocal): If name not found
6808 in static block, then try searching for primitive types.
6810 2015-01-12 Patrick Palka <patrick@parcs.ath.cx>
6812 * top.h (gdb_add_history): Declare.
6813 * top.c (command_count): New variable.
6814 (gdb_add_history): New function.
6815 (gdb_safe_append_history): New static function.
6816 (quit_force): Call it.
6817 (command_line_input): Use gdb_add_history instead of
6819 * event-top.c (command_line_handler): Likewise.
6821 2015-01-12 James Clarke <jrtc27@jrtc27.com> (tiny patch)
6824 * darwin-nat.c: Replace <machine/setjmp.h> #include by
6825 <setjmp.h> #include.
6827 2015-01-11 Doug Evans <xdje42@gmail.com>
6829 * dwarf2read.c (compute_delayed_physnames): Use TYPE_FN_FIELD_PHYSNAME.
6831 2015-01-11 Doug Evans <xdje42@gmail.com>
6834 * NEWS: The "maint demangle" command is renamed as "demangle".
6835 * demangle.c: #include cli/cli-utils.h, language.h.
6836 (demangle_command): New function.
6837 (_initialize_demangle): Add new command "demangle".
6838 * maint.c (maintenance_demangle): Stub out.
6839 (_initialize_maint_cmds): Update help text for "maint demangle",
6840 and mark as deprecated.
6842 2015-01-11 Mark Kettenis <kettenis@gnu.org>
6844 * inf-ptrace.c (inf_ptrace_follow_fork): Adjust now that
6845 inferior_thread is a function.
6847 2015-01-09 Patrick Palka <patrick@parcs.ath.cx>
6849 * Makefile.in (.y.c): Don't munge yacc's #line
6852 2015-01-09 Patrick Palka <patrick@parcs.ath.cx>
6854 * utils.c (defaulted_query): Rewrite to use gdb_readline_wrapper
6855 to prompt for input.
6856 * tui/tui-hooks.c (tui_query_hook): Remove.
6857 (tui_install_hooks): Don't set deprecated_query_hook.
6858 * tui/tui-io.c (tui_redisplay_readline): Fix off-by-one error in
6859 height calculation. Always update the command window's cur_line.
6861 2015-01-09 Pedro Alves <palves@redhat.com>
6863 * breakpoint.c (hardware_breakpoint_inserted_here_p): New
6865 * breakpoint.h (hardware_breakpoint_inserted_here_p): New
6867 * linux-nat.c (linux_nat_status_is_event): Move higher up in file.
6868 (linux_resume_one_lwp): Store the thread's PC. Adjust to clear
6870 (check_stopped_by_watchpoint): New function.
6871 (save_sigtrap): Reimplement.
6872 (linux_nat_stopped_by_watchpoint): Adjust.
6873 (linux_nat_lp_status_is_event): Delete.
6874 (stop_wait_callback): Only call save_sigtrap after storing the
6876 (status_callback): If the thread had been stopped for a breakpoint
6877 that has since been removed, discard the event and resume the LWP.
6878 (count_events_callback, select_event_lwp_callback): Use
6879 lwp_status_pending_p instead of linux_nat_lp_status_is_event.
6880 (cancel_breakpoint): Rename to ...
6881 (check_stopped_by_breakpoint): ... this. Record whether the LWP
6882 stopped for a software breakpoint or hardware breakpoint.
6883 (select_event_lwp): Only give preference to the stepping LWP in
6884 all-stop mode. Adjust comments.
6885 (stop_and_resume_callback): Remove references to new_pending_p.
6886 (linux_nat_filter_event): Likewise. Leave exit events of the
6887 leader thread pending here. Handle signal short circuiting here.
6888 Only call save_sigtrap after storing the pending waitstatus.
6889 (linux_nat_wait_1): Remove 'retry' label. Remove references to
6890 new_pending. Don't handle leaving events the caller is not
6891 interested in pending here, nor handle signal short-circuiting
6892 here. Also give equal priority to all LWPs that have had events
6893 in non-stop mode. If reporting a software breakpoint event,
6894 unadjust the LWP's PC.
6895 * linux-nat.h (enum lwp_stop_reason): New.
6896 (struct lwp_info) <stop_pc>: New field.
6897 (struct lwp_info) <stopped_by_watchpoint>: Delete field.
6898 (struct lwp_info) <stop_reason>: New field.
6899 * x86-linux-nat.c (x86_linux_prepare_to_resume): Adjust.
6901 2015-01-09 Pedro Alves <palves@redhat.com>
6903 * linux-nat.c (linux_handle_extended_wait) <PTRACE_EVENT_EXEC>:
6904 Set the LWP's 'resumed' flag.
6906 2015-01-09 Pedro Alves <palves@redhat.com>
6908 * linux-nat.c (linux_resume_one_lwp): New function.
6909 (resume_lwp): Use lwp_status_pending_p and linux_resume_one_lwp.
6910 (linux_nat_resume): Use lwp_status_pending_p and
6911 linux_resume_one_lwp.
6912 (linux_handle_syscall_trap): Use linux_resume_one_lwp.
6913 (linux_handle_extended_wait): Use linux_resume_one_lwp.
6914 (status_callback, running_callback): Use lwp_status_pending_p.
6915 (lwp_status_pending_p): New function.
6916 (stop_and_resume_callback): Use lwp_status_pending_p.
6917 (linux_nat_filter_event): Use linux_resume_one_lwp.
6918 (linux_nat_wait_1): Always use status_callback to look for an LWP
6919 with a pending status. Use linux_resume_one_lwp.
6920 (resume_stopped_resumed_lwps): Use lwp_status_pending_p and
6921 linux_resume_one_lwp.
6923 2015-01-09 Pedro Alves <palves@redhat.com>
6925 * breakpoint.c (bp_location_inserted_here_p): New function,
6926 factored out from ...
6927 (breakpoint_inserted_here_p): ... here. Use
6928 ALL_BP_LOCATIONS_AT_ADDR.
6929 (software_breakpoint_inserted_here_p): Use
6930 bp_location_inserted_here_p and ALL_BP_LOCATIONS_AT_ADDR.
6932 2014-01-09 Pedro Alves <palves@redhat.com>
6934 Skip enabling event reporting if the kernel supports
6936 * linux-thread-db.c: Include "nat/linux-ptrace.h".
6937 (thread_db_use_events): New function.
6938 (try_thread_db_load_1): Check thread_db_use_events before enabling
6940 (update_thread_state): New function.
6941 (attach_thread): Use it. Check thread_db_use_events before
6942 enabling event reporting.
6943 (thread_db_detach): Check thread_db_use_events before disabling
6945 (find_new_threads_callback): Check thread_db_use_events before
6946 enabling event reporting. Update the thread's state if not using
6947 libthread_db events.
6949 2015-01-09 Pedro Alves <palves@redhat.com>
6951 * linux-nat.c (lin_lwp_attach_lwp): Assert that the lwp id we're
6952 about to wait for is > 0.
6953 * linux-thread-db.c (find_new_threads_callback): Ignore thread if
6954 the kernel thread ID is -1.
6956 2015-01-09 Pedro Alves <palves@redhat.com>
6958 * linux-nat.c (attach_proc_task_lwp_callback): New function.
6959 (linux_nat_attach): Use linux_proc_attach_tgid_threads.
6960 (wait_lwp, linux_nat_filter_event): If not set yet, set the lwp's
6961 ptrace option flags.
6962 * linux-nat.h (struct lwp_info) <must_set_ptrace_flags>: New
6964 * nat/linux-procfs.c: Include <dirent.h>.
6965 (linux_proc_get_int): New parameter "warn". Handle it.
6966 (linux_proc_get_tgid): Adjust.
6967 (linux_proc_get_tracerpid): Rename to ...
6968 (linux_proc_get_tracerpid_nowarn): ... this.
6969 (linux_proc_pid_get_state): New function, factored out from
6970 (linux_proc_pid_has_state): ... this. Add new parameter "warn"
6972 (linux_proc_pid_is_gone): New function.
6973 (linux_proc_pid_is_stopped): Adjust.
6974 (linux_proc_pid_is_zombie_maybe_warn)
6975 (linux_proc_pid_is_zombie_nowarn): New functions.
6976 (linux_proc_pid_is_zombie): Use
6977 linux_proc_pid_is_zombie_maybe_warn.
6978 (linux_proc_attach_tgid_threads): New function.
6979 * nat/linux-procfs.h (linux_proc_get_tgid): Update comment.
6980 (linux_proc_get_tracerpid): Rename to ...
6981 (linux_proc_get_tracerpid_nowarn): ... this, and update comment.
6982 (linux_proc_pid_is_gone): New declaration.
6983 (linux_proc_pid_is_zombie): Update comment.
6984 (linux_proc_pid_is_zombie_nowarn): New declaration.
6985 (linux_proc_attach_lwp_func): New typedef.
6986 (linux_proc_attach_tgid_threads): New declaration.
6987 * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason): Adjust to
6988 use nowarn functions.
6989 (linux_ptrace_attach_fail_reason_string): Move here from
6990 gdbserver/linux-low.c and rename.
6991 (ptrace_supports_feature): If the current ptrace options are not
6992 known yet, check them now, instead of asserting.
6993 * nat/linux-ptrace.h (linux_ptrace_attach_fail_reason_string):
6996 2015-01-09 Pedro Alves <palves@redhat.com>
6998 * linux-thread-db.c (thread_db_find_new_threads_silently)
6999 (try_thread_db_load_1, try_thread_db_load, thread_db_load_search)
7000 (find_new_threads_once): Print debug output on gdb_stdlog.
7002 2015-01-09 Chen Gang <gang.chen.5i5j@gmail.com>
7003 Pedro Alves <palves@redhat.com>
7005 * compile/compile.c: Include "gdb_wait.h".
7006 (do_rmdir): Check return value, and free 'zap'.
7008 2015-01-08 Pedro Alves <palves@redhat.com>
7009 Yao Qi <yao@codesourcery.com>
7011 * dwarf2loc.c (indirect_pieced_value): Don't call
7012 gdb_sign_extend. Call extract_signed_integer instead.
7013 * utils.c (gdb_sign_extend): Remove.
7014 * utils.h (gdb_sign_extend): Remove declaration.
7016 2015-01-07 Pierre Muller <muller@sourceware.org>
7019 * stabsread.c (define_symbol): Set language for C++ special symbols.
7021 2015-01-07 Patrick Palka <patrick@parcs.ath.cx>
7023 * inflow.c (initial_gdb_ttystate): Tweak comment.
7025 2015-01-07 Joel Brobecker <brobecker@adacore.com>
7027 * inflow.c (set_initial_gdb_ttystate): Add empty line after
7028 comment documenting function.
7030 2015-01-07 Patrick Palka <patrick@parcs.ath.cx>
7032 * terminal.h (set_initial_gdb_ttystate): Declare.
7033 * inflow.c (initial_gdb_ttystate): New static variable.
7034 (set_initial_gdb_ttystate): New setter.
7035 (child_terminal_init_with_pgrp): Copy initial_gdb_ttystate
7036 instead of our current terminal state.
7037 * top.c (gdb_init): Call set_initial_gdb_ttystate.
7039 2015-01-07 Joel Brobecker <brobecker@adacore.com>
7041 * guile/scm-type.c (tyscm_array_1): Add comment.
7042 * python/py-type.c (typy_array_1): Add comment.
7044 2015-01-06 Joel Brobecker <brobecker@adacore.com>
7046 * guile/scm-type.c (tyscm_array_1): Do not raise out-of-range
7047 error if N2 is equal to N1 - 1.
7049 2015-01-06 Joel Brobecker <brobecker@adacore.com>
7051 * python/py-type.c (typy_array_1): Do not raise negative-length
7052 exception if N2 is equal to N1 - 1.
7054 2015-01-03 Doug Evans <xdje42@gmail.com>
7056 * c-exp.y: Whitespace cleanup.
7057 (classify_inner_name): Remove extra ;.
7059 2015-01-02 Maciej W. Rozycki <macro@codesourcery.com>
7061 * mips-tdep.c (mips32_scan_prologue): Keep the extracted stack
7064 2015-01-02 Doug Evans <dje@google.com>
7066 * dwarf2read.c (setup_type_unit_groups): Remove outdated comment.
7068 2015-01-02 Doug Evans <dje@google.com>
7070 * symtab.h (struct symbol): Fix typo in comment.
7072 2015-01-01 Joel Brobecker <brobecker@adacore.com>
7074 Update year range in copyright notice of all files.
7076 2015-01-01 Joel Brobecker <brobecker@adacore.com>
7078 * top.c (print_gdb_version): Update copyright year to 2015.
7080 2015-01-01 Joel Brobecker <brobecker@adacore.com>
7082 * config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2014.
7084 For older changes see ChangeLog-2014.
7090 version-control: never