1 2009-07-07 Tristan Gingold <gingold@adacore.com>
3 * config/i386/darwin.mh (NATDEPFILES): Remove excServer.o.
4 Remove excServer.c target. Remove _all target.
5 * darwin.defs: Removed.
7 2009-07-06 Aleksandar Ristovski <aristovski@qnx.com>
9 * configure.tgt (i[34567]86-*-nto*): Add build_gdbserver=yes.
11 2009-07-06 Jan Kratochvil <jan.kratochvil@redhat.com>
13 * source.c (find_and_open_source): Remove the `objfile' parameter.
14 Update the function comment.
15 (open_source_file, symtab_to_fullname, psymtab_to_fullname): Update the
16 find_and_open_source callers.
18 2009-07-05 Pedro Alves <pedro@codesourcery.com>
20 * coff-pe-read.c (read_pe_exported_syms): Recognize
21 "pe-arm-wince-little" and "pei-arm-wince-little" bfd targets as PE
24 2009-07-05 Pedro Alves <pedro@codesourcery.com>
26 * arm-wince-tdep.c (arm_wince_skip_main_prologue): New.
27 (arm_wince_init_abi): Register it as gdbarch_skip_main_prologue
30 2009-06-29 Tristan Gingold <gingold@adacore.com>
32 * i386-darwin-tdep.c (amd64_darwin_thread_state_reg_offset)
33 (amd64_darwin_thread_state_num_regs)
34 (amd64_darwin_sigcontext_addr, x86_darwin_init_abi_64): Moved to
36 (_initialize_i386_darwin_tdep): Remove 64 bits parts.
37 (darwin_dwarf_signal_frame_p): Make public.
38 * amd64-darwin-tdep.c: New file with most chunks from
40 * i386-darwin-tdep.h: Add a prototype for darwin_dwarf_signal_frame_p.
41 (amd64_darwin_thread_state_reg_offset)
42 (amd64_darwin_thread_state_num_regs): Moved to amd64-darwin-tdep.h
43 * amd64-darwin-tdep.h: New file.
44 * i386-darwin-nat.c: Only includes amd64-nat.h and amd64-darwin-tdep.h
46 (i386_darwin_fetch_inferior_registers): Add #ifdef BFD64/#endif around
48 (i386_darwin_store_inferior_registers): Ditto.
49 (darwin_set_sstep): Ditto.
50 (darwin_complete_target): Ditto.
51 (amd64_darwin_sstep_at_sigreturn): Ditto.
52 * configure.tgt: Create a separate entry for x86_64-*-darwin.
53 Add 64 bits support for i386-*-darwin if --enable-64-bit-bfd.
54 * Makefile.in (ALLDEPFILES): Add amd64-darwin-tdep.c, darwin-nat.c,
55 i386-darwin-tdep.c i386-darwin-nat.c
56 (ALL_64_TARGET_OBS): Add amd64-darwin-tdep.o
58 2009-07-02 Pedro Alves <pedro@codesourcery.com>
60 * linux-fork.c (forks_exist_p): Drop unnecessary extern.
61 (add_fork, linux_fork_killall, linux_fork_mourn_inferior)
62 (linux_fork_detach): Ditto.
63 (delete_fork_command): Rename to ...
64 (delete_checkpoint_command): ... this.
65 (detach_fork_command): Rename to ...
66 (detach_checkpoint_command): ... this.
67 (info_forks_command): Rename to ...
68 (info_checkpoints_command): ... this.
69 (_initialize_linux_fork): Remove stale comments. Adjust.
71 2009-07-02 Pedro Alves <pedro@codesourcery.com>
73 * linux-nat.c (linux_child_follow_fork): If we're staying attached
74 to the child process, enable event reporting on it. Don't handle
75 checkpoints here. Instead, add the child fork to the lwp thread
76 and inferior lists without clobbering the previous inferior. Let
77 the thread_db layer learn about a new child process, even if
79 (linux_nat_switch_fork): Delete lwps of the current inferior only,
80 instead of clearing the whole list. Use thread_change_ptid to
81 give the core the illusion the new checkpoint is still the same
82 inferior. Clear the register cache.
83 (linux_handle_extended_wait): Handle checkpoints here.
84 (linux_multi_process): Turn on.
85 * linux-fork.c (struct fork_info) <pc>: Remove field.
86 (init_fork_list): Do not delete the checkpoint from the inferior
87 list (it is not there).
88 (fork_load_infrun_state): Don't switch inferior_ptid here. Pass
89 the new checkpoint's ptid to linux_nat_switch_fork.
90 (fork_save_infrun_state): Make static. Don't stop the pc field of
92 (linux_fork_mourn_inferior): Don't delete the checkpoint from the
93 inferior list, it's not there.
94 (linux_fork_detach): Ditto.
95 (delete_fork_command): Replace mention of fork/checkpoint by
97 (detach_fork_command): Likewise. Don't delete the checkpoint from
99 (info_forks_command): Adjust.
100 (restore_detach_fork): Delete.
101 (checkpointing_pid): New.
102 (linux_fork_checkpointing_p): New.
103 (save_detach_fork): Delete.
104 (checkpoint_command): Delete temp_detach_fork. Don't remove
105 breakpoints, that's a nop. Store the pid of the process we're
106 checkpointing, and use make_cleanup_restore_integer to restore it.
107 Don't reinsert breakpoints here.
108 (process_command, fork_command): Delete.
109 (restart_command): Update comments to only mention checkpoints,
111 (_initialize_linux_fork): Delete "fork", "process", "info forks"
113 * linux-fork.h (fork_save_infrun_state, fork_list): Delete
115 (linux_fork_checkpointing_p): Declare.
116 * cli/cli-cmds.c (killlist): New.
117 * cli/cli-cmds.h (killlist): Declare.
118 * gdbcmd.h (killlist): Declare.
119 * inferior.c: Include "gdbthread.h".
120 (detach_inferior_command, kill_inferior_command)
121 (inferior_command): New.
122 (info_inferiors_command): Allow specifying a specific inferior id.
123 (_initialize_inferiors): Register "inferior", "kill inferior" and
124 "detach inferior" commands.
125 * infcmd.c (_initialize_infcmd): Make "kill" a prefix command.
126 * gdbthread.h (any_thread_of_process): Declare.
127 * thread.c (any_thread_of_process): New.
129 * NEWS: Mention multi-inferior debugging. Mention 'info
130 inferiors', 'inferior', 'detach inferior' and 'kill inferior' as
132 (Removed commands): New section, mentioning that 'info forks',
133 'fork', 'process', 'delete fork' and 'detach fork' are now gone.
135 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
137 * gdbarch.sh (current_gdbarch): Remove global variable.
138 (find_arch_by_info): Remove, inline into ...
139 (gdbarch_find_by_info): ... this. Remove current_gdbarch swapping.
140 (deprecated_current_gdbarch_select_hack): Rename to ...
141 (deprecated_target_gdbarch_select_hack): ... this. Do not set
142 or access current_gdbarch.
143 * gdbarch.c, gdbarch.h: Regenerate.
145 * arch-utils.c (gdbarch_update_p): Update call.
146 (set_gdbarch_from_file): Likewise.
148 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
150 * defs.h (extract_signed_integer, extract_unsigned_integer,
151 extract_long_unsigned_integer, store_signed_integer,
152 store_unsigned_integer): Add BYTE_ORDER parameter.
153 * findvar.c (extract_signed_integer, extract_unsigned_integer,
154 extract_long_unsigned_integer, store_signed_integer,
155 store_unsigned_integer): Add BYTE_ORDER parameter. Use it
156 instead of current_gdbarch.
158 * gdbcore.h (read_memory_integer, safe_read_memory_integer,
159 read_memory_unsigned_integer, write_memory_signed_integer,
160 write_memory_unsigned_integer): Add BYTE_ORDER parameter.
161 * corefile.c (struct captured_read_memory_integer_arguments): Add
163 (safe_read_memory_integer): Add BYTE_ORDER parameter. Store it into
164 struct captured_read_memory_integer_arguments.
165 (do_captured_read_memory_integer): Pass it to read_memory_integer.
166 (read_memory_integer): Add BYTE_ORDER parameter. Pass it to
167 extract_signed_integer.
168 (read_memory_unsigned_integer): Add BYTE_ORDER parameter. Pass it to
169 extract_unsigned_integer.
170 (write_memory_signed_integer): Add BYTE_ORDER parameter. Pass it
171 to store_signed_integer.
172 (write_memory_unsigned_integer): Add BYTE_ORDER parameter. Pass it
173 to store_unsigned_integer.
175 * target.h (get_target_memory_unsigned): Add BYTE_ORDER parameter.
176 * target.c (get_target_memory_unsigned): Add BYTE_ORDER parameter.
177 Pass it to extract_unsigned_integer.
180 Update calls to extract_signed_integer, extract_unsigned_integer,
181 extract_long_unsigned_integer, store_signed_integer,
182 store_unsigned_integer, read_memory_integer,
183 read_memory_unsigned_integer, safe_read_memory_integer,
184 write_memory_signed_integer, write_memory_unsigned_integer, and
185 get_target_memory_unsigned to pass byte order:
186 * ada-lang.c (ada_value_binop): Update.
187 * ada-valprint.c (char_at): Update.
188 * alpha-osf1-tdep.c (alpha_osf1_sigcontext_addr): Update.
189 * alpha-tdep.c (alpha_lds, alpha_sts, alpha_push_dummy_call,
190 alpha_extract_return_value, alpha_read_insn,
191 alpha_get_longjmp_target): Update.
192 * amd64-linux-tdep.c (amd64_linux_sigcontext_addr): Update.
193 * amd64obsd-tdep.c (amd64obsd_supply_uthread,
194 amd64obsd_collect_uthread, amd64obsd_trapframe_cache): Update.
195 * amd64-tdep.c (amd64_push_dummy_call, amd64_analyze_prologue,
196 amd64_frame_cache, amd64_sigtramp_frame_cache, fixup_riprel,
197 amd64_displaced_step_fixup): Update.
198 * arm-linux-tdep.c (arm_linux_sigreturn_init,
199 arm_linux_rt_sigreturn_init, arm_linux_supply_gregset): Update.
200 * arm-tdep.c (thumb_analyze_prologue, arm_skip_prologue,
201 arm_scan_prologue, arm_push_dummy_call, thumb_get_next_pc,
202 arm_get_next_pc, arm_extract_return_value, arm_store_return_value,
203 arm_return_value): Update.
204 * arm-wince-tdep.c (arm_pe_skip_trampoline_code): Update.
205 * auxv.c (default_auxv_parse): Update.
206 * avr-tdep.c (avr_address_to_pointer, avr_pointer_to_address,
207 avr_scan_prologue, avr_extract_return_value,
208 avr_frame_prev_register, avr_push_dummy_call): Update.
209 * bsd-uthread.c (bsd_uthread_check_magic, bsd_uthread_lookup_offset,
210 bsd_uthread_wait, bsd_uthread_thread_alive,
211 bsd_uthread_extra_thread_info): Update.
212 * c-lang.c (c_printstr, print_wchar): Update.
213 * cp-valprint.c (cp_print_class_member): Update.
214 * cris-tdep.c (cris_sigcontext_addr, cris_sigtramp_frame_unwind_cache,
215 cris_push_dummy_call, cris_scan_prologue, cris_store_return_value,
216 cris_extract_return_value, find_step_target, dip_prefix,
217 sixteen_bit_offset_branch_op, none_reg_mode_jump_op,
218 move_mem_to_reg_movem_op, get_data_from_address): Update.
219 * dwarf2expr.c (dwarf2_read_address, execute_stack_op): Update.
220 * dwarf2-frame.c (execute_cfa_program): Update.
221 * dwarf2loc.c (find_location_expression): Update.
222 * dwarf2read.c (dwarf2_const_value): Update.
223 * expprint.c (print_subexp_standard): Update.
224 * findvar.c (unsigned_pointer_to_address, signed_pointer_to_address,
225 unsigned_address_to_pointer, address_to_signed_pointer,
226 read_var_value): Update.
227 * frame.c (frame_unwind_register_signed,
228 frame_unwind_register_unsigned, get_frame_memory_signed,
229 get_frame_memory_unsigned): Update.
230 * frame-unwind.c (frame_unwind_got_constant): Update.
231 * frv-linux-tdep.c (frv_linux_pc_in_sigtramp,
232 frv_linux_sigcontext_reg_addr, frv_linux_sigtramp_frame_cache):
234 * frv-tdep.c (frv_analyze_prologue, frv_skip_main_prologue,
235 frv_extract_return_value, find_func_descr,
236 frv_convert_from_func_ptr_addr, frv_push_dummy_call): Update.
237 * f-valprint.c (f_val_print): Update.
238 * gnu-v3-abi.c (gnuv3_decode_method_ptr, gnuv3_make_method_ptr):
240 * h8300-tdep.c (h8300_is_argument_spill, h8300_analyze_prologue,
241 h8300_push_dummy_call, h8300_extract_return_value,
242 h8300h_extract_return_value, h8300_store_return_value,
243 h8300h_store_return_value): Update.
244 * hppabsd-tdep.c (hppabsd_find_global_pointer): Update.
245 * hppa-hpux-nat.c (hppa_hpux_fetch_register, hppa_hpux_store_register):
247 * hppa-hpux-tdep.c (hppa32_hpux_in_solib_call_trampoline,
248 hppa64_hpux_in_solib_call_trampoline,
249 hppa_hpux_in_solib_return_trampoline, hppa_hpux_skip_trampoline_code,
250 hppa_hpux_sigtramp_frame_unwind_cache,
251 hppa_hpux_sigtramp_unwind_sniffer, hppa32_hpux_find_global_pointer,
252 hppa64_hpux_find_global_pointer, hppa_hpux_search_pattern,
253 hppa32_hpux_search_dummy_call_sequence,
254 hppa64_hpux_search_dummy_call_sequence, hppa_hpux_supply_save_state,
255 hppa_hpux_unwind_adjust_stub): Update.
256 * hppa-linux-tdep.c (insns_match_pattern,
257 hppa_linux_find_global_pointer): Update.
258 * hppa-tdep.c (hppa_in_function_epilogue_p, hppa32_push_dummy_call,
259 hppa64_convert_code_addr_to_fptr, hppa64_push_dummy_call,
260 skip_prologue_hard_way, hppa_frame_cache, hppa_fallback_frame_cache,
261 hppa_pseudo_register_read, hppa_frame_prev_register_helper,
262 hppa_match_insns): Update.
263 * hpux-thread.c (hpux_thread_fetch_registers): Update.
264 * i386-tdep.c (i386bsd_sigcontext_addr): Update.
265 * i386-cygwin-tdep.c (core_process_module_section): Update.
266 * i386-darwin-nat.c (i386_darwin_sstep_at_sigreturn,
267 amd64_darwin_sstep_at_sigreturn): Update.
268 * i386-darwin-tdep.c (i386_darwin_sigcontext_addr,
269 amd64_darwin_sigcontext_addr): Likewise.
270 * i386-linux-nat.c (i386_linux_sigcontext_addr): Update.
271 * i386nbsd-tdep.c (i386nbsd_sigtramp_cache_init): Update.
272 * i386-nto-tdep.c (i386nto_sigcontext_addr): Update.
273 * i386obsd-nat.c (i386obsd_supply_pcb): Update.
274 * i386obsd-tdep.c (i386obsd_supply_uthread, i386obsd_collect_uthread,
275 i386obsd_trapframe_cache): Update.
276 * i386-tdep.c (i386_displaced_step_fixup, i386_follow_jump,
277 i386_analyze_frame_setup, i386_analyze_prologue,
278 i386_skip_main_prologue, i386_frame_cache, i386_sigtramp_frame_cache,
279 i386_get_longjmp_target, i386_push_dummy_call,
280 i386_pe_skip_trampoline_code, i386_svr4_sigcontext_addr,
281 i386_fetch_pointer_argument): Update.
282 * i387-tdep.c (i387_supply_fsave): Update.
283 * ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Update.
284 * ia64-tdep.c (ia64_pseudo_register_read, ia64_pseudo_register_write,
285 examine_prologue, ia64_frame_cache, ia64_frame_prev_register,
286 ia64_sigtramp_frame_cache, ia64_sigtramp_frame_prev_register,
287 ia64_access_reg, ia64_access_rse_reg, ia64_libunwind_frame_this_id,
288 ia64_libunwind_frame_prev_register,
289 ia64_libunwind_sigtramp_frame_this_id,
290 ia64_libunwind_sigtramp_frame_prev_register, ia64_find_global_pointer,
291 find_extant_func_descr, find_func_descr,
292 ia64_convert_from_func_ptr_addr, ia64_push_dummy_call, ia64_dummy_id,
293 ia64_unwind_pc): Update.
294 * iq2000-tdep.c (iq2000_pointer_to_address, iq2000_address_to_pointer,
295 iq2000_scan_prologue, iq2000_extract_return_value,
296 iq2000_push_dummy_call): Update.
297 * irix5nat.c (fill_gregset): Update.
298 * jv-lang.c (evaluate_subexp_java): Update.
299 * jv-valprint.c (java_value_print): Update.
300 * lm32-tdep.c (lm32_analyze_prologue, lm32_push_dummy_call,
301 lm32_extract_return_value, lm32_store_return_value): Update.
302 * m32c-tdep.c (m32c_push_dummy_call, m32c_return_value,
303 m32c_skip_trampoline_code, m32c_m16c_address_to_pointer,
304 m32c_m16c_pointer_to_address): Update.
305 * m32r-tdep.c (m32r_store_return_value, decode_prologue,
306 m32r_skip_prologue, m32r_push_dummy_call, m32r_extract_return_value):
308 * m68hc11-tdep.c (m68hc11_pseudo_register_read,
309 m68hc11_pseudo_register_write, m68hc11_analyze_instruction,
310 m68hc11_push_dummy_call): Update.
311 * m68linux-tdep.c (m68k_linux_pc_in_sigtramp,
312 m68k_linux_get_sigtramp_info, m68k_linux_sigtramp_frame_cache):
314 * m68k-tdep.c (m68k_push_dummy_call, m68k_analyze_frame_setup,
315 m68k_analyze_register_saves, m68k_analyze_prologue, m68k_frame_cache,
316 m68k_get_longjmp_target): Update.
317 * m88k-tdep.c (m88k_fetch_instruction): Update.
318 * mep-tdep.c (mep_pseudo_cr32_read, mep_pseudo_csr_write,
319 mep_pseudo_cr32_write, mep_get_insn, mep_push_dummy_call): Update.
320 * mi/mi-main.c (mi_cmd_data_write_memory): Update.
321 * mips-linux-tdep.c (mips_linux_get_longjmp_target, supply_32bit_reg,
322 mips64_linux_get_longjmp_target, mips64_fill_gregset,
323 mips64_fill_fpregset, mips_linux_in_dynsym_stub): Update.
324 * mipsnbdsd-tdep.c (mipsnbsd_get_longjmp_target): Update.
325 * mips-tdep.c (mips_fetch_instruction, fetch_mips_16,
326 mips_eabi_push_dummy_call, mips_n32n64_push_dummy_call,
327 mips_o32_push_dummy_call, mips_o64_push_dummy_call,
328 mips_single_step_through_delay, mips_skip_pic_trampoline_code,
329 mips_integer_to_address): Update.
330 * mn10300-tdep.c (mn10300_analyze_prologue, mn10300_push_dummy_call):
332 * monitor.c (monitor_supply_register, monitor_write_memory,
333 monitor_read_memory_single): Update.
334 * moxie-tdep.c (moxie_store_return_value, moxie_extract_return_value,
335 moxie_analyze_prologue): Update.
336 * mt-tdep.c (mt_return_value, mt_skip_prologue, mt_select_coprocessor,
337 mt_pseudo_register_read, mt_pseudo_register_write, mt_registers_info,
338 mt_push_dummy_call): Update.
339 * objc-lang.c (read_objc_method, read_objc_methlist_nmethods,
340 read_objc_methlist_method, read_objc_object, read_objc_super,
341 read_objc_class, find_implementation_from_class): Update.
342 * ppc64-linux-tdep.c (ppc64_desc_entry_point,
343 ppc64_linux_convert_from_func_ptr_addr, ppc_linux_sigtramp_cache):
345 * ppcobsd-tdep.c (ppcobsd_sigtramp_frame_sniffer,
346 ppcobsd_sigtramp_frame_cache): Update.
347 * ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call,
348 do_ppc_sysv_return_value, ppc64_sysv_abi_push_dummy_call,
349 ppc64_sysv_abi_return_value): Update.
350 * ppc-linux-nat.c (ppc_linux_auxv_parse): Update.
351 * procfs.c (procfs_auxv_parse): Update.
352 * p-valprint.c (pascal_val_print): Update.
353 * regcache.c (regcache_raw_read_signed, regcache_raw_read_unsigned,
354 regcache_raw_write_signed, regcache_raw_write_unsigned,
355 regcache_cooked_read_signed, regcache_cooked_read_unsigned,
356 regcache_cooked_write_signed, regcache_cooked_write_unsigned): Update.
357 * remote-m32r-sdi.c (m32r_fetch_register): Update.
358 * remote-mips.c (mips_wait, mips_fetch_registers, mips_xfer_memory):
360 * rs6000-aix-tdep.c (rs6000_push_dummy_call, rs6000_return_value,
361 rs6000_convert_from_func_ptr_addr, branch_dest,
362 rs6000_software_single_step): Update.
363 * rs6000-tdep.c (rs6000_in_function_epilogue_p,
364 ppc_displaced_step_fixup, ppc_deal_with_atomic_sequence,
365 bl_to_blrl_insn_p, rs6000_fetch_instruction, skip_prologue,
366 rs6000_skip_main_prologue, rs6000_skip_trampoline_code,
367 rs6000_frame_cache): Update.
368 * s390-tdep.c (s390_pseudo_register_read, s390_pseudo_register_write,
369 s390x_pseudo_register_read, s390x_pseudo_register_write, s390_load,
370 s390_backchain_frame_unwind_cache, s390_sigtramp_frame_unwind_cache,
371 extend_simple_arg, s390_push_dummy_call, s390_return_value): Update.
372 * scm-exp.c (scm_lreadr): Update.
373 * scm-lang.c (scm_get_field, scm_unpack): Update.
374 * scm-valprint.c (scm_val_print): Update.
375 * score-tdep.c (score_breakpoint_from_pc, score_push_dummy_call,
376 score_fetch_inst): Update.
377 * sh64-tdep.c (look_for_args_moves, sh64_skip_prologue_hard_way,
378 sh64_analyze_prologue, sh64_push_dummy_call, sh64_extract_return_value,
379 sh64_pseudo_register_read, sh64_pseudo_register_write,
380 sh64_frame_prev_register): Update:
381 * sh-tdep.c (sh_analyze_prologue, sh_push_dummy_call_fpu,
382 sh_push_dummy_call_nofpu, sh_extract_return_value_nofpu,
383 sh_store_return_value_nofpu, sh_in_function_epilogue_p): Update.
384 * solib-darwin.c (darwin_load_image_infos): Update.
385 * solib-frv.c (fetch_loadmap, lm_base, frv_current_sos, enable_break2,
386 find_canonical_descriptor_in_load_object): Update.
387 * solib-irix.c (extract_mips_address, fetch_lm_info, irix_current_sos,
388 irix_open_symbol_file_object): Update.
389 * solib-som.c (som_solib_create_inferior_hook, link_map_start,
390 som_current_sos, som_open_symbol_file_object): Update.
391 * solib-sunos.c (SOLIB_EXTRACT_ADDRESS, LM_ADDR, LM_NEXT, LM_NAME):
393 * solib-svr4.c (read_program_header, scan_dyntag_auxv,
394 solib_svr4_r_ldsomap): Update.
395 * sparc64-linux-tdep.c (sparc64_linux_step_trap): Update.
396 * sparc64obsd-tdep.c (sparc64obsd_supply_uthread,
397 sparc64obsd_collect_uthread): Update.
398 * sparc64-tdep.c (sparc64_pseudo_register_read,
399 sparc64_pseudo_register_write, sparc64_supply_gregset,
400 sparc64_collect_gregset): Update.
401 * sparc-linux-tdep.c (sparc32_linux_step_trap): Update.
402 * sparcobsd-tdep.c (sparc32obsd_supply_uthread,
403 sparc32obsd_collect_uthread): Update.
404 * sparc-tdep.c (sparc_fetch_wcookie, sparc32_push_dummy_code,
405 sparc32_store_arguments, sparc32_return_value, sparc_supply_rwindow,
406 sparc_collect_rwindow): Update.
407 * spu-linux-nat.c (parse_spufs_run): Update.
408 * spu-tdep.c (spu_pseudo_register_read_spu,
409 spu_pseudo_register_write_spu, spu_pointer_to_address,
410 spu_analyze_prologue, spu_in_function_epilogue_p,
411 spu_frame_unwind_cache, spu_push_dummy_call, spu_software_single_step,
412 spu_get_longjmp_target, spu_get_overlay_table, spu_overlay_update_osect,
413 info_spu_signal_command, info_spu_mailbox_list, info_spu_dma_cmdlist,
414 info_spu_dma_command, info_spu_proxydma_command): Update.
415 * stack.c (print_frame_nameless_args, frame_info): Update.
416 * symfile.c (read_target_long_array, simple_read_overlay_table,
417 simple_read_overlay_region_table): Update.
418 * target.c (debug_print_register): Update.
419 * tramp-frame.c (tramp_frame_start): Update.
420 * v850-tdep.c (v850_analyze_prologue, v850_push_dummy_call,
421 v850_extract_return_value, v850_store_return_value,
422 * valarith.c (value_binop, value_bit_index): Update.
423 * valops.c (value_cast): Update.
424 * valprint.c (val_print_type_code_int, val_print_string,
425 read_string): Update.
426 * value.c (unpack_long, unpack_double, unpack_field_as_long,
427 modify_field, pack_long): Update.
428 * vax-tdep.c (vax_store_arguments, vax_push_dummy_call,
429 vax_skip_prologue): Update.
430 * xstormy16-tdep.c (xstormy16_push_dummy_call,
431 xstormy16_analyze_prologue, xstormy16_in_function_epilogue_p,
432 xstormy16_resolve_jmp_table_entry, xstormy16_find_jmp_table_entry,
433 xstormy16_pointer_to_address, xstormy16_address_to_pointer): Update.
434 * xtensa-tdep.c (extract_call_winsize, xtensa_pseudo_register_read,
435 xtensa_pseudo_register_write, xtensa_frame_cache,
436 xtensa_push_dummy_call, call0_track_op, call0_frame_cache): Update.
439 * dfp.h (decimal_to_string, decimal_from_string, decimal_from_integral,
440 decimal_from_floating, decimal_to_doublest, decimal_is_zero): Add
441 BYTE_ORDER parameter.
442 (decimal_binop): Add BYTE_ORDER_X, BYTE_ORDER_Y, and BYTE_ORDER_RESULT
444 (decimal_compare): Add BYTE_ORDER_X and BYTE_ORDER_Y parameters.
445 (decimal_convert): Add BYTE_ORDER_FROM and BYTE_ORDER_TO parameters.
446 * dfp.c (match_endianness): Add BYTE_ORDER parameter. Use it
447 instead of current_gdbarch.
448 (decimal_to_string, decimal_from_integral, decimal_from_floating,
449 decimal_to_doublest, decimal_is_zero): Add BYTE_ORDER parameter.
450 Pass it to match_endianness.
451 (decimal_binop): Add BYTE_ORDER_X, BYTE_ORDER_Y, and BYTE_ORDER_RESULT
452 parameters. Pass them to match_endianness.
453 (decimal_compare): Add BYTE_ORDER_X and BYTE_ORDER_Y parameters.
454 Pass them to match_endianness.
455 (decimal_convert): Add BYTE_ORDER_FROM and BYTE_ORDER_TO parameters.
456 Pass them to match_endianness.
457 * valarith.c (value_args_as_decimal): Add BYTE_ORDER_X and
458 BYTE_ORDER_Y output parameters.
459 (value_binop): Update call to value_args_as_decimal.
461 Update calls to decimal_to_string, decimal_from_string,
462 decimal_from_integral, decimal_from_floating, decimal_to_doublest,
463 decimal_is_zero, decimal_binop, decimal_compare and decimal_convert
464 to pass/receive byte order:
465 * c-exp.y (parse_number): Update.
466 * printcmd.c (printf_command): Update.
467 * valarith.c (value_args_as_decimal, value_binop, value_logical_not,
468 value_equal, value_less): Update.
469 * valops.c (value_cast, value_one): Update.
470 * valprint.c (print_decimal_floating): Update.
471 * value.c (unpack_long, unpack_double): Update.
472 * python/python-value.c (valpy_nonzero): Update.
475 * ada-valprint.c (char_at): Add BYTE_ORDER parameter.
476 (printstr): Update calls to char_at.
477 (ada_val_print_array): Likewise.
478 * valprint.c (read_string): Add BYTE_ORDER parameter.
479 (val_print_string): Update call to read_string.
480 * c-lang.c (c_get_string): Likewise.
481 * charset.h (target_wide_charset): Add BYTE_ORDER parameter.
482 * charset.c (target_wide_charset): Add BYTE_ORDER parameter.
483 Use it instead of current_gdbarch.
484 * printcmd.c (printf_command): Update calls to target_wide_charset.
485 * c-lang.c (charset_for_string_type): Add BYTE_ORDER parameter.
486 Pass to target_wide_charset. Use it instead of current_gdbarch.
487 (classify_type): Add BYTE_ORDER parameter. Pass to
488 charset_for_string_type. Allow NULL encoding pointer.
489 (print_wchar): Add BYTE_ORDER parameter.
490 (c_emit_char): Update calls to classify_type and print_wchar.
491 (c_printchar, c_printstr): Likewise.
494 * gdbarch.sh (in_solib_return_trampoline): Convert to type "m".
495 * gdbarch.c, gdbarch.h: Regenerate.
496 * arch-utils.h (generic_in_solib_return_trampoline): Add GDBARCH
498 * arch-utils.c (generic_in_solib_return_trampoline): Likewise.
499 * hppa-hpux-tdep.c (hppa_hpux_in_solib_return_trampoline): Likewise.
500 * rs6000-tdep.c (rs6000_in_solib_return_trampoline): Likewise.
501 (rs6000_skip_trampoline_code): Update call.
503 * alpha-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to
504 dynamic_sigtramp_offset and pc_in_sigtramp callbacks.
505 (alpha_read_insn): Add GDBARCH parameter.
506 * alpha-tdep.c (alpha_lds, alpha_sts): Add GDBARCH parameter.
507 (alpha_register_to_value): Pass architecture to alpha_sts.
508 (alpha_extract_return_value): Likewise.
509 (alpha_value_to_register): Pass architecture to alpha_lds.
510 (alpha_store_return_value): Likewise.
511 (alpha_read_insn): Add GDBARCH parameter.
512 (alpha_skip_prologue): Pass architecture to alpha_read_insn.
513 (alpha_heuristic_proc_start): Likewise.
514 (alpha_heuristic_frame_unwind_cache): Likewise.
515 (alpha_next_pc): Likewise.
516 (alpha_sigtramp_frame_this_id): Pass architecture to
517 tdep->dynamic_sigtramp_offset callback.
518 (alpha_sigtramp_frame_sniffer): Pass architecture to
519 tdep->pc_in_sigtramp callback.
520 * alphafbsd-tdep.c (alphafbsd_pc_in_sigtramp): Add GDBARCH parameter.
521 (alphafbsd_sigtramp_offset): Likewise.
522 * alpha-linux-tdep.c (alpha_linux_sigtramp_offset_1): Add GDBARCH
523 parameter. Pass to alpha_read_insn.
524 (alpha_linux_sigtramp_offset): Add GDBARCH parameter. Pass to
525 alpha_linux_sigtramp_offset_1.
526 (alpha_linux_pc_in_sigtramp): Add GDBARCH parameter. Pass to
527 alpha_linux_sigtramp_offset.
528 (alpha_linux_sigcontext_addr): Pass architecture to alpha_read_insn
529 and alpha_linux_sigtramp_offset.
530 * alphanbsd-tdep.c (alphanbsd_sigtramp_offset): Add GDBARCH parameter.
531 (alphanbsd_pc_in_sigtramp): Add GDBARCH parameter. Pass to
532 alphanbsd_sigtramp_offset.
533 * alphaobsd-tdep.c (alphaobsd_sigtramp_offset): Add GDBARCH parameter.
534 (alphaobsd_pc_in_sigtramp): Add GDBARCH parameter. Pass to
536 (alphaobsd_sigcontext_addr): Pass architecture to
537 alphaobsd_sigtramp_offset.
538 * alpha-osf1-tdep.c (alpha_osf1_pc_in_sigtramp): Add GDBARCH
541 * amd64-tdep.c (amd64_analyze_prologue): Add GDBARCH parameter.
542 (amd64_skip_prologue): Pass architecture to amd64_analyze_prologue.
543 (amd64_frame_cache): Likewise.
545 * arm-tdep.c (SWAP_SHORT, SWAP_INT): Remove.
546 (thumb_analyze_prologue, arm_skip_prologue, arm_scan_prologue,
547 thumb_get_next_pc, arm_get_next_pc): Do not use SWAP_ macros.
548 * arm-wince-tdep.c: Include "frame.h".
550 * avr-tdep.c (EXTRACT_INSN): Remove.
551 (avr_scan_prologue): Add GDBARCH argument, inline EXTRACT_INSN.
552 (avr_skip_prologue): Pass architecture to avr_scan_prologue.
553 (avr_frame_unwind_cache): Likewise.
555 * cris-tdep.c (struct instruction_environment): Add BYTE_ORDER member.
556 (find_step_target): Initialize it.
557 (get_data_from_address): Add BYTE_ORDER parameter.
558 (bdap_prefix): Pass byte order to get_data_from_address.
559 (handle_prefix_assign_mode_for_aritm_op): Likewise.
560 (three_operand_add_sub_cmp_and_or_op): Likewise.
561 (handle_inc_and_index_mode_for_aritm_op): Likewise.
563 * frv-linux-tdep.c (frv_linux_pc_in_sigtramp): Add GDBARCH parameter.
564 (frv_linux_sigcontext_reg_addr): Pass architecture to
565 frv_linux_pc_in_sigtramp.
566 (frv_linux_sigtramp_frame_sniffer): Likewise.
568 * h8300-tdep.c (h8300_is_argument_spill): Add GDBARCH parameter.
569 (h8300_analyze_prologue): Add GDBARCH parameter. Pass to
570 h8300_is_argument_spill.
571 (h8300_frame_cache, h8300_skip_prologue): Pass architecture
572 to h8300_analyze_prologue.
574 * hppa-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to
575 in_solib_call_trampoline callback.
576 (hppa_in_solib_call_trampoline): Add GDBARCH parameter.
577 * hppa-tdep.c (hppa64_convert_code_addr_to_fptr): Add GDBARCH
579 (hppa64_push_dummy_call): Pass architecture to
580 hppa64_convert_code_addr_to_fptr.
581 (hppa_match_insns): Add GDBARCH parameter.
582 (hppa_match_insns_relaxed): Add GDBARCH parameter. Pass to
584 (hppa_skip_trampoline_code): Pass architecture to hppa_match_insns.
585 (hppa_in_solib_call_trampoline): Add GDBARCH parameter. Pass to
586 hppa_match_insns_relaxed.
587 (hppa_stub_unwind_sniffer): Pass architecture to
588 tdep->in_solib_call_trampoline callback.
589 * hppa-hpux-tdep.c (hppa_hpux_search_pattern): Add GDBARCH parameter.
590 (hppa32_hpux_search_dummy_call_sequence): Pass architecture to
591 hppa_hpux_search_pattern.
592 * hppa-linux-tdep.c (insns_match_pattern): Add GDBARCH parameter.
593 (hppa_linux_sigtramp_find_sigcontext): Add GDBARCH parameter.
594 Pass to insns_match_pattern.
595 (hppa_linux_sigtramp_frame_unwind_cache): Pass architecture to
596 hppa_linux_sigtramp_find_sigcontext.
597 (hppa_linux_sigtramp_frame_sniffer): Likewise.
598 (hppa32_hpux_in_solib_call_trampoline): Add GDBARCH parameter.
599 (hppa64_hpux_in_solib_call_trampoline): Likewise.
601 * i386-tdep.c (i386_follow_jump): Add GDBARCH parameter.
602 (i386_analyze_frame_setup): Add GDBARCH parameter.
603 (i386_analyze_prologue): Add GDBARCH parameter. Pass to
604 i386_follow_jump and i386_analyze_frame_setup.
605 (i386_skip_prologue): Pass architecture to i386_analyze_prologue
606 and i386_follow_jump.
607 (i386_frame_cache): Pass architecture to i386_analyze_prologue.
608 (i386_pe_skip_trampoline_code): Add FRAME parameter.
609 * i386-tdep.h (i386_pe_skip_trampoline_code): Add FRAME parameter.
610 * i386-cygwin-tdep.c (i386_cygwin_skip_trampoline_code): Pass
611 frame to i386_pe_skip_trampoline_code.
613 * ia64-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter
614 to sigcontext_register_address callback.
615 * ia64-tdep.c (ia64_find_global_pointer): Add GDBARCH parameter.
616 (ia64_find_unwind_table): Pass architecture to
617 ia64_find_global_pointer.
618 (find_extant_func_descr): Add GDBARCH parameter.
619 (find_func_descr): Pass architecture to find_extant_func_descr
620 and ia64_find_global_pointer.
621 (ia64_sigtramp_frame_init_saved_regs): Pass architecture to
622 tdep->sigcontext_register_address callback.
623 * ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Add
626 * iq2000-tdep.c (iq2000_scan_prologue): Add GDBARCH parameter.
627 (iq2000_frame_cache): Pass architecture to iq2000_scan_prologue.
629 * lm32-tdep.c (lm32_analyze_prologue): Add GDBARCH parameter.
630 (lm32_skip_prologue, lm32_frame_cache): Pass architecture to
631 lm32_analyze_prologue.
633 * m32r-tdep.c (decode_prologue): Add GDBARCH parameter.
634 (m32r_skip_prologue): Pass architecture to decode_prologue.
636 * m68hc11-tdep.c (m68hc11_analyze_instruction): Add GDBARCH parameter.
637 (m68hc11_scan_prologue): Pass architecture to
638 m68hc11_analyze_instruction.
640 * m68k-tdep.c (m68k_analyze_frame_setup): Add GDBARCH parameter.
641 (m68k_analyze_prologue): Pass architecture to
642 m68k_analyze_frame_setup.
644 * m88k-tdep.c (m88k_fetch_instruction): Add BYTE_ORDER parameter.
645 (m88k_analyze_prologue): Add GDBARCH parameter. Pass byte order
646 to m88k_fetch_instruction.
647 (m88k_skip_prologue): Pass architecture to m88k_analyze_prologue.
648 (m88k_frame_cache): Likewise.
650 * mep-tdep.c (mep_get_insn): Add GDBARCH parameter.
651 (mep_analyze_prologue): Pass architecture to mep_get_insn.
653 * mips-tdep.c (mips_fetch_instruction): Add GDBARCH parameter.
654 (mips32_next_pc): Pass architecture to mips_fetch_instruction.
655 (deal_with_atomic_sequence): Likewise.
656 (unpack_mips16): Add GDBARCH parameter, pass to mips_fetch_instruction.
657 (mips16_scan_prologue): Likewise.
658 (mips32_scan_prologue): Likewise.
659 (mips16_in_function_epilogue_p): Likewise.
660 (mips32_in_function_epilogue_p): Likewise.
661 (mips_about_to_return): Likewise.
662 (mips_insn16_frame_cache): Pass architecture to mips16_scan_prologue.
663 (mips_insn32_frame_cache): Pass architecture to mips32_scan_prologue.
664 (mips_skip_prologue): Pass architecture to mips16_scan_prologue
665 and mips32_scan_prologue.
666 (mips_in_function_epilogue_p): Pass architecture to
667 mips16_in_function_epilogue_p and
668 mips32_in_function_epilogue_p.
669 (heuristic_proc_start): Pass architecture to mips_fetch_instruction
670 and mips_about_to_return.
671 (mips_skip_mips16_trampoline_code): Pass architecture to
672 mips_fetch_instruction.
673 (fetch_mips_16): Add GDBARCH parameter.
674 (mips16_next_pc): Pass architecture to fetch_mips_16.
675 (extended_mips16_next_pc): Pass architecture to unpack_mips16 and
678 * objc-lang.c (read_objc_method, read_objc_methlist_nmethods,
679 read_objc_methlist_method, read_objc_object, read_objc_super,
680 read_objc_class): Add GDBARCH parameter.
681 (find_implementation_from_class): Add GDBARCH parameter, pass
682 to read_objc_class, read_objc_methlist_nmethods, and
683 read_objc_methlist_method.
684 (find_implementation): Add GDBARCH parameter, pass to
685 read_objc_object and find_implementation_from_class.
686 (resolve_msgsend, resolve_msgsend_stret): Pass architecture
687 to find_implementation.
688 (resolve_msgsend_super, resolve_msgsend_super_stret): Pass
689 architecture to read_objc_super and find_implementation_from_class.
691 * ppc64-linux-tdep.c (ppc64_desc_entry_point): Add GDBARCH parameter.
692 (ppc64_standard_linkage1_target, ppc64_standard_linkage2_target,
693 ppc64_standard_linkage3_target): Pass architecture to
694 ppc64_desc_entry_point.
695 * rs6000-tdep.c (bl_to_blrl_insn_p): Add BYTE_ORDER parameter.
696 (skip_prologue): Pass byte order to bl_to_blrl_insn_p.
697 (rs6000_fetch_instruction): Add GDBARCH parameter.
698 (rs6000_skip_stack_check): Add GDBARCH parameter, pass to
699 rs6000_fetch_instruction.
700 (skip_prologue): Pass architecture to rs6000_fetch_instruction.
702 * remote-mips.c (mips_store_word): Return old_contents as host
703 integer value instead of target bytes.
705 * s390-tdep.c (struct s390_prologue_data): Add BYTE_ORDER member.
706 (s390_analyze_prologue): Initialize it.
707 (extend_simple_arg): Add GDBARCH parameter.
708 (s390_push_dummy_call): Pass architecture to extend_simple_arg.
710 * scm-lang.c (scm_get_field): Add BYTE_ORDER parameter.
711 * scm-lang.h (scm_get_field): Add BYTE_ORDER parameter.
712 (SCM_CAR, SCM_CDR): Pass SCM_BYTE_ORDER to scm_get_field.
713 * scm-valprint.c (scm_scmval_print): Likewise.
714 (scm_scmlist_print, scm_ipruk, scm_scmval_print): Define
717 * sh64-tdep.c (look_for_args_moves): Add GDBARCH parameter.
718 (sh64_skip_prologue_hard_way): Add GDBARCH parameter, pass to
720 (sh64_skip_prologue): Pass architecture to
721 sh64_skip_prologue_hard_way.
722 * sh-tdep.c (sh_analyze_prologue): Add GDBARCH parameter.
723 (sh_skip_prologue): Pass architecture to sh_analyze_prologue.
724 (sh_frame_cache): Likewise.
726 * solib-irix.c (extract_mips_address): Add GDBARCH parameter.
727 (fetch_lm_info, irix_current_sos, irix_open_symbol_file_object):
728 Pass architecture to extract_mips_address.
730 * sparc-tdep.h (sparc_fetch_wcookie): Add GDBARCH parameter.
731 * sparc-tdep.c (sparc_fetch_wcookie): Add GDBARCH parameter.
732 (sparc_supply_rwindow, sparc_collect_rwindow): Pass architecture
733 to sparc_fetch_wcookie.
734 (sparc32_frame_prev_register): Likewise.
735 * sparc64-tdep.c (sparc64_frame_prev_register): Likewise.
736 * sparc32nbsd-tdep.c (sparc32nbsd_sigcontext_saved_regs): Likewise.
737 * sparc64nbsd-tdep.c (sparc64nbsd_sigcontext_saved_regs): Likewise.
739 * spu-tdep.c (spu_analyze_prologue): Add GDBARCH parameter.
740 (spu_skip_prologue): Pass architecture to spu_analyze_prologue.
741 (spu_virtual_frame_pointer): Likewise.
742 (spu_frame_unwind_cache): Likewise.
743 (info_spu_mailbox_list): Add BYTE_ORER parameter.
744 (info_spu_mailbox_command): Pass byte order to info_spu_mailbox_list.
745 (info_spu_dma_cmdlist): Add BYTE_ORER parameter.
746 (info_spu_dma_command, info_spu_proxydma_command): Pass byte order
747 to info_spu_dma_cmdlist.
749 * symfile.c (read_target_long_array): Add GDBARCH parameter.
750 (simple_read_overlay_table, simple_read_overlay_region_table,
751 simple_overlay_update_1): Pass architecture to read_target_long_array.
753 * v850-tdep.c (v850_analyze_prologue): Add GDBARCH parameter.
754 (v850_frame_cache): Pass architecture to v850_analyze_prologue.
756 * xstormy16-tdep.c (xstormy16_analyze_prologue): Add GDBARCH
758 (xstormy16_skip_prologue, xstormy16_frame_cache): Pass architecture
759 to xstormy16_analyze_prologue.
760 (xstormy16_resolve_jmp_table_entry): Add GDBARCH parameter.
761 (xstormy16_find_jmp_table_entry): Likewise.
762 (xstormy16_skip_trampoline_code): Pass architecture to
763 xstormy16_resolve_jmp_table_entry.
764 (xstormy16_pointer_to_address): Likewise.
765 (xstormy16_address_to_pointer): Pass architecture to
766 xstormy16_find_jmp_table_entry.
768 * xtensa-tdep.c (call0_track_op): Add GDBARCH parameter.
769 (call0_analyze_prologue): Add GDBARCH parameter, pass to
771 (call0_frame_cache): Pass architecture to call0_analyze_prologue.
772 (xtensa_skip_prologue): Likewise.
774 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
776 * defs.h (strlen_paddr, paddr, paddr_nz): Remove.
777 (paddress): Add GDBARCH parameter.
778 * utils.c (strlen_paddr, paddr, paddr_nz): Remove.
779 (paddress): Add GDBARCH parameter, use it instead of current_gdbarch.
780 * ui-out.h (ui_out_field_core_addr): Add GDBARCH parameter.
781 * ui-out.c (ui_out_field_core_addr): Add GDBARCH parameter,
782 use it instead of current_gdbarch.
784 Update calls to ui_out_field_core_addr to pass architecture:
785 * ada-lang.c (print_one_exception): Update.
786 * breakpoint.c (print_one_breakpoint_location,
787 print_one_exception_catchpoint): Update.
788 * disasm.c (dump_insns): Update.
789 * darwin-nat-info.c (darwin_debug_regions_recurse): Update.
790 * mi/mi-main.c (mi_cmd_data_read_memory): Update.
791 * mi/mi-symbol-cmds.c: Include "objfiles.h".
792 (mi_cmd_symbol_list_lines): Update.
793 * stack.c (print_frame_info, print_frame): Update.
795 Update callers of paddress to pass architecture:
796 * ada-tasks.c (info_task): Update.
797 * ada-valprint.c (ada_val_print_1): Update.
798 * annotate.c (annotate_source, annotate_frame_begin): Update.
799 * breakpoint.c (insert_bp_location, describe_other_breakpoints,
801 * cli/cli-cmds.c (edit_command, list_command, print_disassembly):
803 * corefile.c (memory_error): Update.
804 * c-valprint.c (print_function_pointer_address, c_val_print): Update.
805 * disasm.c (dis_asm_print_address): Update.
806 * exec.c (print_section_info): Update.
807 * f-valprint.c (f_val_print): Update.
808 * infcmd.c: Include "arch-utils.h".
809 (jump_command, program_info): Update.
810 * linux-fork.c: Include "arch-utils.h".
811 (info_forks_command): Update.
812 * m2-valprint.c (print_function_pointer_address,
813 print_unpacked_pointer, print_variable_at_address,
814 m2_val_print): Update.
815 * m32r-rom.c (m32r_load_section, m32r_load, m32r_upload_command):
817 * printcmd.c (print_address, print_address_demangle, address_info):
819 * p-valprint.c (pascal_val_print): Update.
820 * source.c: Include "arch-utils.h".
822 * stack.c (frame_info, print_block_frame_labels): Update.
823 * symfile.c (add_symbol_file_command, list_overlays_command): Update.
824 * symmisc.c (dump_msymbols, dump_psymtab, dump_symtab_1,
825 print_symbol, print_partial_symbols, maintenance_info_psymtabs,
826 maintenance_check_symtabs): Update.
827 * symtab.c (find_pc_sect_symtab): Update.
828 * target.c (deprecated_debug_xfer_memory): Update.
829 * tracepoint.c (scope_info): Update.
830 * tui/tui-stack.c (tui_make_status_line): Update.
831 * valprint.c (val_print_string): Update.
833 Update callers of paddr_nz to use paddress instead (keeping
834 user-visible output identical):
835 * alpha-tdep.c (alpha_heuristic_proc_start): Update.
836 * amd64-tdep.c (fixup_riprel, amd64_displaced_step_copy_insn,
837 amd64_displaced_step_fixup): Update.
838 * arch-utils.c (simple_displaced_step_copy_insn): Update.
839 * auxv.c (fprint_target_auxv): Update.
840 * breakpoint.c (insert_single_step_breakpoint): Update.
841 * buildsym.c (finish_block): Update.
842 * cli/cli-dump.c (restore_section_callback): Update.
843 * fbsd-nat.c (fbsd_find_memory_regions): Update.
844 * frame.c (frame_unwind_register_value): Update.
845 * gcore.c (gcore_create_callback): Update.
846 * hppa-tdep.c (hppa_frame_cache, hppa_skip_trampoline_code): Update.
847 * i386-tdep.c (i386_displaced_step_fixup, i386_record_modrm,
848 i386_record_lea_modrm_addr, i386_record_lea_modrm,
849 i386_process_record): Update.
850 * ia64-tdep.c (ia64_frame_this_id, ia64_sigtramp_frame_this_id,
851 ia64_libunwind_frame_this_id, ia64_libunwind_sigtramp_frame_this_id,
852 ia64_dummy_id, ia64_access_reg, ia64_access_rse_reg): Update.
853 * infrun.c (displaced_step_prepare, displaced_step_fixup,
854 handle_inferior_event, insert_step_resume_breakpoint_at_sal,
855 insert_longjmp_resume_breakpoint): Update.
856 * linux-nat.c (linux_nat_find_memory_regions): Update.
857 * linux-record.c (record_linux_system_call): Update.
858 * mips-tdep.c (heuristic_proc_start, mips_eabi_push_dummy_call,
859 mips_n32n64_push_dummy_call, mips_o32_push_dummy_call,
860 mips_o64_push_dummy_call): Update.
861 * monitor.c (monitor_error, monitor_remove_breakpoint): Update.
862 * record.c (record_arch_list_add_mem, record_wait,
863 record_xfer_partial): Update.
864 * remote-mips.c (mips_fetch_word, mips_check_lsi_error,
865 mips_common_breakpoint): Update.
866 * remote-sim.c (gdbsim_xfer_inferior_memory): Update.
867 * rs6000-tdep.c (ppc_displaced_step_fixup): Update.
868 * solib-som.c (som_current_sos): Update.
869 * symfile.c (load_progress, generic_load): Update.
870 * symfile-mem.c (add_vsyscall_page): Update.
871 * valops.c (value_fetch_lazy): Update.
872 * windows-tdep.c (windows_xfer_shared_library): Update.
874 Update callers of paddr_nz to use paddress instead (changing
875 user-visible output to make it more correct):
876 * dwarf2loc.c (locexpr_describe_location): Update.
877 * ia64-tdep.c (ia64_memory_insert_breakpoint,
878 ia64_memory_remove_breakpoint): Update.
879 * jv-valprint.c (java_value_print): Update.
880 * m32c-tdep.c (m32c_m16c_address_to_pointer): Update.
881 * monitor.c (monitor_read_memory): Update.
883 Update callers of paddr to use paddress instead (changing
884 user-visible output to make it more correct):
885 * arm-tdep.c (arm_push_dummy_call): Update.
886 * breakpoint.c (insert_bp_location, create_thread_event_breakpoint,
887 create_breakpoint): Update.
888 * darwin-nat-info.c (darwin_debug_regions): Update.
889 * dcache.c (dcache_info): Update.
890 * dsrec.c (load_srec, make_srec): Update.
891 * dwarf2-frame.c (dwarf2_restore_rule, execute_cfa_program,
892 dwarf2_frame_cache): Update.
893 * gcore.c (gcore_copy_callback): Update.
894 * gnu-nat.c (gnu_xfer_memory): Update.
895 * mips-linux-nat.c (mips_show_dr): Update.
896 * monitor.c (monitor_write_memory, monitor_insert_breakpoint,
897 monitor_remove_breakpoint): Update.
898 * remote.c (compare_sections_command): Update.
899 * remote-m32r-sdi.c (m32r_xfer_memory, m32r_insert_breakpoint,
900 m32r_remove_breakpoint, m32r_insert_watchpoint,
901 m32r_remove_watchpoint): Update.
902 * sol-thread.c (info_cb): Update.
903 * symfile.c (load_progress): Update.
905 Update callers of paddress or paddr_nz to use hex_string instead
906 (changes output of internal/error/debug messages only):
907 * dwarf2read.c (dump_die_shallow): Update.
908 * frame.c (fprint_field, fprint_frame, frame_pc_unwind,
909 get_frame_func, create_new_frame): Update.
910 * hppa-tdep.c (find_unwind_entry, unwind_command): Update.
911 * ia64-tdep.c (get_kernel_table, ia64_find_proc_info_x,
912 ia64_get_dyn_info_list): Update.
913 * maint.c (maintenance_translate_address): Update.
914 * mi/mi-cmd-var.c (mi_cmd_var_create): Update.
915 * target.c (target_flash_erase): Update.
917 Update callers of paddr/paddr_nz to use phex/phex_nz instead,
918 using an appropriate address size. Remove use of strlen_paddr.
919 * exec.c (exec_files_info): Update.
920 * i386-nat.c (i386_show_dr): Update.
921 * remote.c (remote_flash_erase): Update.
922 * m32r-rom.c (m32r_load_section): Update.
923 * monitor.c (monitor_vsprintf, monitor_store_register): Update.
924 * remote.c (remote_check_symbols, remote_search_memory): Update.
925 * remote-mips.c (mips_request, mips_common_breakpoint): Update.
926 * scm-valprint.c (scm_ipruk, scm_scmval_print): Update.
927 * sh64-tdep.c (sh64_show_media_regs, sh64_show_compact_regs): Update.
928 * sh-tdep.c (sh_generic_show_regs, sh3_show_regs, sh2e_show_regs,
929 sh2a_show_regs, sh2a_nofpu_show_regs, sh3e_show_regs,
930 sh3_dsp_show_regs, sh4_show_regs, sh4_nofpu_show_regs,
931 sh_dsp_show_regs): Update.
932 * xcoffsolib.c (sharedlibrary_command): Update.
935 * maint.c (maint_print_section_info): Add ADDR_SIZE parameter.
936 Use hex_string_custom instead of paddr.
937 (print_bfd_section_info): Pass address size.
938 (print_objfile_section_info): Likewise.
940 * annotate.h (annotate_source): Add GDBARCH parameter.
941 (annotate_frame_begin): Likewise.
942 * annotate.c (annotate_source): Add GDBARCH parameter.
943 (annotate_frame_begin): Likewise.
944 * source.c (identify_source_line): Update call to annotate_source.
945 * stack.c (print_frame_info, print_frame): Update call to
946 annotate_frame_begin.
948 * breakpoint.c (describe_other_breakpoints): Add GDBARCH parameter.
949 (create_breakpoint, create_ada_exception_breakpoint): Update call.
951 * stack.c (print_block_frame_labels): Add GDBARCH parameter.
952 (print_frame_label_vars): Update call.
954 * symmisc.c (print_partial_symbols): Add GDBARCH parameter.
955 (dump_psymtab): Update call to print_partial_symbols.
956 (struct print_symbol_args): Add GDBARCH member.
957 (dump_symtab_1): Set print_symbol_args architecture member.
958 (print_symbol): Use it.
960 * windows-tdep.h (windows_xfer_shared_library): Add GDBARCH
962 * windows-tdep.c (windows_xfer_shared_library): Likewise.
963 * i386-cygwin-tdep.c (struct cpms_data): Add GDBARCH member.
964 (core_process_module_section): Pass architecture from cpms_data to
965 windows_xfer_shared_library.
966 (windows_core_xfer_shared_libraries): Initialize cmps_data
968 * windows-nat.c (windows_xfer_shared_libraries): Pass architecture
969 to windows_xfer_shared_library.
971 * defs.h (print_address): Add GDBARCH parameter.
972 * printcmd.c (print_address): Add GDBARCH parameter.
973 (print_scalar_formatted, do_examine): Update call.
974 * findcmd.c (find_command): Update call.
975 * tracepoint.c: Include "arch-utils.h".
976 (trace_find_line_command): Update call.
977 * tui/tui-disasm.c (tui_disassemble): Update call.
979 * value.h (print_address_demangle): Add GDBARCH parameter.
980 * printcmd.c (print_address_demangle): Add GDBARCH parameter.
981 * c-valprint.c (print_function_pointer_address, c_val_print):
983 * f-valprint.c (f_val_print): Update call.
984 * gnu-v3-abi.c (gnuv3_print_method_ptr): Update call.
985 * jv-valprint.c (java_val_print): Update call.
986 * m2-valprint.c (print_function_pointer_address, m2_val_print):
988 * p-valprint.c (pascal_val_print): Update call.
990 * disasm.c (gdb_disassemble_info): Install architecture into
991 di.application_data field.
993 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
995 * disasm.h (gdb_disassembly): Add GDBARCH parameter.
996 (gdb_print_insn): Likewise.
997 * disasm.c (dump_insns): Add GDBARCH parameter. Use it instead
999 (do_mixed_source_and_assembly): Add GDBARCH parameter. Pass to
1001 (do_assembly_only): Likewise.
1002 (gdb_disassembly): Add GDBARCH parameter. Use it instead of
1003 current_gdbarch. Pass to subroutines.
1004 (gdb_print_insn): Add GDBARCH parameter. Use it instead of
1007 * stack.c (struct gdb_disassembly_stub_args): Add GDBARCH member.
1008 (gdb_disassembly_stub): Pass architecture to gdb_disassembly.
1009 (do_gdb_disassembly): Add GDBARCH argument. Store into args.
1010 (print_frame_info): Pass architecture to do_gdb_disassembly.
1012 * printcmd.c (print_formatted): Pass architecture to gdb_print_insn.
1014 * mi/mi-cmd-disas.c: Include "arch-utils.h"
1015 (mi_cmd_disassemble): Pass architecture to gdb_disassembly.
1017 * cli/cli-cmds.c: Include "arch-utils.h".
1018 (print_disassembly): Add GDBARCH parameter. Pass to gdb_disassembly
1019 and tui_show_assembly.
1020 (disassemble_current_function): Pass architecture to
1021 tui_get_low_disassembly_address and print_disassembly.
1022 (disassemble_command): Pass architecture to
1023 tui_get_low_disassembly_address and print_disassembly.
1025 * tui/tui.c (tui_show_assembly): Add GDBARCH parameter. Pass to
1026 tui_update_source_windows_with_addr.
1028 * tui/tui-data.h (struct tui_locator_element): Add GDBARCH member.
1029 (struct tui_source_info): Likewise.
1030 * tui/tui-data.c (tui_clear_win_detail): Clear source_info.gdbarch.
1032 * tui/tui-disasm.c (tui_disassemble): Add GDBARCH parameter.
1033 Pass to gdb_print_insn.
1034 (tui_find_disassembly_address): Add GDBARCH parameter. Pass to
1036 (tui_set_disassem_content): Add GDBARCH parameter. Install into
1037 source_info.gdbarch. Pass to tui_disassemble.
1038 (tui_show_disassem): Add GDBARCH parameter. Pass to
1039 tui_update_source_window.
1040 (tui_show_disassem_and_update_source): Add GDBARCH parameter. Pass to
1041 tui_show_disassem and tui_update_source_window.
1043 (tui_get_begin_asm_address): Return locator architecture in addition
1044 to locator PC value.
1046 (tui_get_low_disassembly_address): Add GDBARCH parameter. Pass to
1047 tui_get_low_disassembly_address.
1049 (tui_vertical_disassem_scroll): Pass architecture to subroutines.
1051 * tui/tui-disasm.h (tui_set_disassem_content): Add GDBARCH parameter.
1052 (tui_show_disassem): Likewise.
1053 (tui_show_disassem_and_update_source): Likewise.
1054 (tui_get_begin_asm_address): Return architecture and PC value.
1056 * tui/tui.h (tui_get_low_disassembly_address): Add GDBARCH parameter.
1057 (tui_show_assembly): Add GDBARCH parameter.
1059 * tui/tui-layout.c (extract_display_start_addr): Return current window
1060 architecture in addition to current PC value.
1062 (tui_set_layout): Update calls to tui_get_low_disassembly_address and
1063 extract_display_start_addr. Pass architecture to
1064 tui_update_source_windows_with_addr.
1066 * tui/tui-source.c: Include "objfiles.h".
1067 (tui_set_source_content): Initialize window architecture.
1068 (tui_show_symtab_source): Add GDBARCH parameter. Pass to
1069 tui_update_source_window_as_is
1071 * tui/tui-source.h (tui_show_symtab_source): Add GDBARCH parameter.
1073 * tui/tui-stack.c (tui_set_locator_info): Add GDBARCH parameter.
1074 Install locator architecture.
1075 (tui_set_locator_filename): Update call.
1076 (tui_show_frame_info): Pass architecture to tui_set_locator_info
1079 * tui/tui-win.c (make_visible_with_new_height): Pass architecture
1080 to tui_update_source_window.
1082 * tui/tui-winsource.c: Include "objfiles.h".
1083 (tui_display_main): Update call to tui_get_begin_asm_address.
1084 Pass architecture to tui_update_source_windows_with_addr.
1085 (tui_update_source_window): Add GDBARCH parameter. Pass to
1086 tui_update_source_window_as_is.
1087 (tui_update_source_window_as_is): Add GDBARCH parameter.
1088 Pass to tui_set_disassem_content.
1089 (tui_update_source_windows_with_addr): Add GDBARCH parameter.
1090 Pass to subroutines.
1091 (tui_update_source_windows_with_line): Pass objfile architecture
1093 (tui_horizontal_source_scroll): Pass architecture to
1094 tui_update_source_window_as_is.
1096 * tui/tui-winsource.h (tui_update_source_window): Add GDBARCH
1098 (tui_update_source_window_as_is): Likewise.
1099 (tui_update_source_windows_with_addr): Likewise.
1101 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
1103 * breakpoint.h (struct breakpoint): New member GDBARCH.
1104 * breakpoint.c: Include "arch-utils.h".
1105 (set_raw_breakpoint_without_location): Add GDBARCH parameter.
1106 Use it to set breakpoint architecture.
1107 (set_raw_breakpoint): Add GDBARCH parameter.
1108 (create_internal_breakpoint): Likewise.
1109 (create_catchpoint): Likewise.
1110 (create_fork_vfork_event_catchpoint): Likewise.
1111 (create_breakpoint): Likewise.
1112 (create_breakpoints): Likewise.
1113 (break_command_really): Likewise.
1114 (create_ada_exception_breakpoint): Likewise.
1115 Update local callers to pass architecture:
1116 (create_internal_breakpoint): Update.
1117 (create_overlay_event_breakpoint): Update.
1118 (create_longjmp_master_breakpoint): Update.
1119 (create_thread_event_breakpoint): Update.
1120 (create_solib_event_breakpoint): Update.
1121 (create_catchpoint): Update.
1122 (create_fork_vfork_event_catchpoint): Update.
1123 (set_momentary_breakpoint): Update.
1124 (clone_momentary_breakpoint): Update.
1125 (create_breakpoint): Update.
1126 (create_breakpoints): Update.
1127 (break_command_really): Update.
1128 (break_command_1): Update.
1129 (set_breakpoint): Update.
1130 (watch_command_1): Update.
1131 (catch_fork_command_1): Update.
1132 (catch_exec_commnd_1): Update.
1133 (handle_gnu_v3_exceptions): Update.
1134 (create_ada_exception_breakpoint): Update.
1135 (catch_ada_exception_command): Update.
1136 (catch_assert_command): Update.
1137 (trace_command): Update.
1139 * breakpoint.h (struct bp_location): New member GDBARCH.
1140 * breakpoint.c (get_sal_arch): New function.
1141 (set_raw_breakpoint): Set location architecture.
1142 (add_location_to_breakpoint): Likewise.
1143 (clone_momentary_breakpoint): Likewise.
1144 (watch_command_1): Likewise.
1145 (update_watchpoint): Likewise.
1146 (bp_loc_is_permanent): Use location architecture instead of
1148 (adjust_breakpoint_address): Add GDBARCH parameter; use it
1149 instead of current_gdbarch.
1150 Update callers of adjust_breakpoint_address to pass
1151 breakpoint location architecture:
1152 (set_raw_breakpoint): Update.
1153 (watch_command_1): Update.
1155 * tracepoint.c: (collect_symbol): Add GDBARCH parameter, use instead
1157 (add_local_symbols): Add GDBARCH parameter. Pass to collect_symbol.
1158 (encode_actions): Pass tracepoint architecture to add_local_symbols
1159 (encode_actions): Use tracepoint architecture instead of
1160 current_gdbarch. Pass it to add_local_symbols and collect_symbol.
1162 * breakpoint.h (struct breakpoint_ops): Replace last_addr parameter
1163 of print_one callback with last_loc.
1164 * breakpoint.c (print_one_breakpoint_location): Replace last_addr
1165 parameter with last_loc.
1166 (print_one_breakpoint): Likewise.
1167 (do_captured_breakpoint_query): Update call.
1168 (breakpoint_1): Pass last_loc instead of last_addr to
1169 print_one_breakpoint. Pass last location architecture instead of
1170 current_gdbarch to set_next_address.
1171 Update all implementations of the print_one callback:
1172 * breakpoint.c (print_one_catch_fork): Update.
1173 (print_one_catch_vfork): Update.
1174 (print_one_catch_exec): Update.
1175 (print_one_exception_catchpoint): Update.
1176 * ada-lang.c (print_one_exception): Update.
1177 (print_one_catch_exception): Update.
1178 (print_one_catch_exception_unhandled): Update.
1179 (print_one_catch_assert): Update.
1181 * breakpoint.c (print_one_breakpoint_location): Add PRINT_ADDRESS_BITS
1182 parameter. Use it instead of gdbarch_addr_bit (current_gdbarch).
1183 (print_one_breakpoint): Add PRINT_ADDRESS_BITS parameter and pass it
1184 to print_one_breakpoint_location.
1185 (breakpoint_address_bits): New function.
1186 (do_captured_breakpoint_query): Compute number of address bits to print
1187 and pass it to print_one_breakpoint.
1188 (breakpoint_1): Likewise. Use it instead of current_gdbarch.
1190 * breakpoint.h (create_thread_event_breakpoint): Add GDBARCH.
1191 * breakpoint.c (create_thread_event_breakpoint): Likewise.
1192 Update callers to create_thread_event_breakpoint:
1193 * aix-thread.c (pd_enable): Update.
1194 * linux-thread-db.c (enable_thread_event): Update.
1196 * breakpoint.h (create_solib_event_breakpoint): Add GDBARCH.
1197 * breakpoint.c (create_solib_event_breakpoint): Likewise.
1198 Update callers to create_solib_event_breakpoint:
1199 * solib-frv.c (enable_break, enable_break2): Update.
1200 * solib-pa64.c (pa64_solib_create_inferior_hook): Update.
1201 * solib-som.c (som_solib_create_inferior_hook): Update.
1202 * solib-darwin.c (darwin_solib_create_inferior_hook): Update.
1203 * solib-svr4.c (enable_break): Update.
1205 * breakpoint.h (insert_single_step_breakpoint): Add GDBARCH.
1206 * breakpoint.c (insert_single_step_breakpoint): Likewise.
1207 Update callers to insert_single_step_breakpoint:
1208 * alpha-tdep.c (alpha_software_single_step): Update.
1209 * arm-linux-tdep.c (arm_linux_software_single_step): Update.
1210 * arm-tdep.c (arm_software_single_step): Update.
1211 * cris-tdep.c (cris_software_single_step): Update.
1212 * rs6000-aix-tdep.c (rs6000_software_single_step): Update.
1213 * rs6000-tdep.c (ppc_deal_with_atomic_sequence): Update.
1214 * sparc-tdep.c (sparc_software_single_step): Update.
1215 * spu-tdep.c (spu_software_single_step): Update.
1216 * mips-tdep.c (deal_with_atomic_sequence): Add GDBARCH parameter.
1217 Pass it to insert_single_step_breakpoint.
1218 (mips_software_single_step): Pass architecture to
1219 deal_with_atomic_sequence and insert_single_step_breakpoint.
1221 * breakpoint.h (deprecated_insert_raw_breakpoint): Add GDBARCH.
1222 (deprecated_remove_raw_breakpoint): Likewise.
1223 * breakpoint.c (deprecated_insert_raw_breakpoint): Add GDBARCH.
1224 (deprecated_remove_raw_breakpoint): Likewise.
1225 Update callers to deprecated_insert_raw_breakpoint and
1226 deprecated_remove_raw_breakpoint:
1227 * breakpoint.c (single_step_gdbarch): New static variable.
1228 (insert_single_step_breakpoint): Pass GDBARCH parameter to
1229 deprecated_insert_raw_breakpoint. Store it in single_step_gdbarch.
1230 (remove_single_step_breakpoints): Pass architecture stored in
1231 single_step_gdbarch to deprecated_remove_raw_breakpoint.
1232 * rs6000-nat.c (exec_one_dummy_insn): Update.
1233 * solib-irix.c (enable_break, disable_break): Update.
1234 * procfs.c (procfs_mourn_inferior): Update.
1235 (remove_dbx_link_breakpoint): Update.
1237 * breakpoint.h (set_breakpoint): Add GDBARCH parameter.
1238 (set_momentary_breakpoint, set_momentary_breakpoint_at_pc): Likewise.
1239 * breakpoint.c (set_breakpoint): Add GDBARCH parameter.
1240 (set_momentary_breakpoint, set_momentary_breakpoint_at_pc): Likewise.
1241 Update callers to set_breakpoint, set_momentary_breakpoint and
1242 set_momentary_breakpoint_at_pc:
1243 * breakpoint.c (set_momentary_breakpoint_at_pc): Update.
1244 (until_break_command): Update.
1245 * infcall.c (call_function_by_hand): Update.
1246 * infcmd.c (finish_backward, finish_forward): Update.
1247 * infrun.c (insert_step_resume_breakpoint_at_sal): Add GDBARCH
1248 parameter. Pass it to set_momentary_breakpoint.
1249 (insert_longjmp_resume_breakpoint): Add GDBARCH parameter.
1250 Pass it to set_momentary_breakpoint_at_pc.
1251 (handle_inferior_event): Update.
1252 (insert_step_resume_breakpoint_at_frame): Update.
1253 (insert_step_resume_breakpoint_at_caller): Update..
1254 * mi/mi-cmd-break.c: Include "arch-utils.h".
1255 (mi_cmd_break_insert): Update.
1257 * target.h (struct target_ops): Add GDBARCH parameter to
1258 to_insert_breakpoint, to_remove_breakpoint, to_insert_hw_breakpoint,
1259 and to_remove_hw_breakpoint members.
1260 (target_insert_breakpoint, target_remove_breakpoint,
1261 target_insert_hw_breakpoint, target_remove_hw_breakpoint): Add GDBARCH
1262 parameter, pass to target routine.
1263 (memory_remove_breakpoint, memory_insert_breakpoint): Add GDBARCH
1265 * target.c (debug_to_insert_breakpoint, debug_to_remove_breakpoint,
1266 debug_to_insert_hw_breakpoint, debug_to_remove_hw_breakpoint): Add
1267 GDBARCH parameter, pass to target routine.
1268 (update_current_target): Update function signature.
1269 * breakpoint.c (insert_bp_location, remove_breakpoint,
1270 deprecated_insert_raw_breakpoint, deprecated_remove_raw_breakpoint):
1271 Pass architecture to target_ routines.
1272 Update all implementations of the target breakpoint routines to take
1273 GDBARCH parameter and use it instead of GDBARCH as appropriate:
1274 * corelow.c (ignore): Update.
1275 * exec.c (ignore): Update.
1276 * mem-break.c (memory_insert_breakpoint): Update.
1277 (memory_remove_breakpoint): Update.
1278 * monitor.c (monitor_insert_breakpoint): Update.
1279 (monitor_remove_breakpoint): Update.
1280 * record.c (record_insert_breakpoint): Update.
1281 (record_beneath_to_insert_breakpoint): Update.
1282 (record_remove_breakpoint): Update.
1283 (record_beneath_to_remove_breakpoint): Update.
1284 * remote.c (remote_insert_breakpoint): Update.
1285 (remote_remove_breakpoint): Update.
1286 (remote_insert_hw_breakpoint): Update.
1287 (remote_remove_hw_breakpoint): Update.
1288 * remote-m32r-sdi.c (m32r_insert_breakpoint): Update.
1289 (m32r_remove_breakpoint): Update.
1290 * remote-mips.c (mips_insert_breakpoint): Update.
1291 (mips_remove_breakpoint): Update.
1292 * i386-nat.c (i386_insert_hw_breakpoint): Update.
1293 (i386_remove_hw_breakpoint): Update.
1294 * nto-procfs.c (procfs_insert_breakpoint): Update.
1295 (procfs_remove_breakpoint): Update.
1296 (procfs_insert_hw_breakpoint): Update.
1297 (procfs_remove_hw_breakpoint): Update.
1299 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
1301 * frame.h (frame_unwind_arch): New.
1302 (frame_unwind_caller_arch): Likewise.
1303 * frame-unwind.h (frame_prev_arch_ftype): New type.
1304 (struct frame_unwind): New member prev_arch.
1305 * frame.c (struct frame_info): New member prev_arch.
1306 (frame_unwind_arch): New function.
1307 (frame_unwind_caller_arch): Likewise..
1308 (get_frame_arch): Reimplement in terms of frame_unwind_arch.
1309 * sentinel-frame.c (sentinel_frame_prev_arch): New function.
1310 (sentinel_frame_unwinder): Install it.
1312 * frame.c (frame_pc_unwind): Use frame_unwind_arch instead
1314 (frame_unwind_register_value): Likewise.
1315 (frame_unwind_register_signed): Likewise.
1316 (frame_unwind_register_unsigned): Likewise.
1317 * frame-unwind.c (frame_unwind_got_optimized): Likewise.
1318 (frame_unwind_got_register): Likewise.
1319 (frame_unwind_got_constant): Likewise.
1320 (frame_unwind_got_bytes): Likewise.
1321 (frame_unwind_got_address): Likewise.
1323 * frame.h (enum frame_type): New value ARCH_FRAME.
1324 * frame.c (fprint_frame_type): Handle ARCH_FRAME.
1325 * stack.c (print_frame_info): Likewise.
1327 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
1329 * target.h (struct target_ops): New member to_thread_architecture.
1330 (target_thread_architecture): New macro.
1331 * target.c (update_current_target): Inherit to_thread_architecture.
1332 (default_thread_architecture): New function.
1333 (debug_to_thread_architecture): New function.
1334 (setup_target_debug): Handle to_thread_architecture.
1336 * regcache.h (get_thread_arch_regcache): New.
1337 * regcache.c (struct regcache_list): New data type.
1338 (current_regcache): Hold regcache list instead of single regcache.
1339 (current_thread_ptid, current_thread_arch): New static variables.
1340 (get_thread_arch_regcache): New function.
1341 (get_thread_regcache): Use it. Call target_thread_architecture.
1342 (regcache_thread_ptid_changed): Update to current_regcache changes.
1343 (registers_changed): Likewise. Reset current_thread_arch and
1344 current_thread_ptid.
1346 * remote.c (remote_wait): Access target registers in target_gdbarch.
1347 * linux-nat.c (linux_nat_do_thread_registers): Likewise.
1348 * proc-service.c (ps_lgetregs, ps_lsetregs): Likewise.
1349 (ps_lgetfpregs, ps_lsetfpregs): Likewise.
1350 * sol-thread.c (ps_lgetregs, ps_lsetregs): Likewise.
1351 (ps_lgetfpregs, ps_lsetfpregs): Likewise.
1352 * solib-svr4.c (enable_break): Likewise.
1353 (svr4_relocate_main_executable): Likewise.
1355 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
1357 * python/python-internal.h (struct language_defn): Declare.
1358 (python_gdbarch, python_language): Likewise.
1359 (ensure_python_env): Add prototype.
1360 (make_cleanup_py_restore_gil): Remove prototype.
1362 * python/python.c: Include "arch-utils.h", "value.h" and "language.h".
1363 (python_gdbarch, python_language): New global variables.
1364 (struct python_env): New data type.
1365 (ensure_python_env, restore_python_env): New functions.
1366 (eval_python_from_control_command): Call ensure_python_env to
1367 install current architecture and language.
1368 (python_command, gdbpy_new_objfile): Likewise.
1369 * python/python-cmd.c: Include "arch-utils.h" and "language.h".
1370 (cmdpy_destroyer, cmdpy_function, cmdpy_completer): Call
1372 * python/python-type.c (clean_up_objfile_types): Likewise.
1373 * python/python-objfile.c: Include "language.h".
1374 (clean_up_objfile): Call ensure_python_env.
1375 * python/python-prettyprint.c (apply_val_pretty_printer): Likewise.
1376 (apply_varobj_pretty_printer): Do not call PyGILState_Ensure.
1377 * varobj.c (varobj_ensure_python_env): New helper function.
1378 (varobj_get_display_hint, update_dynamic_varobj_children,
1379 install_default_visualizer, varobj_set_visualizer, free_variable,
1380 value_get_print_value): Call it.
1381 (value_get_print_value): Add varobj argument instead of pretty
1382 printer argument. Update all callers.
1384 * python/python-utils.c (py_gil_restore, make_cleanup_py_restore_gil):
1387 * value.h (internal_function_fn): Add GDBARCH and LANGUAGE argument.
1388 (call_internal_function): Likewise.
1389 * value.c (call_internal_function): Likewise. Pass to handler.
1390 * eval.c (evaluate_subexp_standard): Update call.
1391 * python/python-function.c: Include "language.h".
1392 (fnpy_call): Add GDBARCH and LANGAUAGE arguments and call
1393 make_cleanup_python_env.
1395 * python/python-value.c (builtin_type_pyint, builtin_type_pyfloat,
1396 builtin_type_pylong, builtin_type_pybool, builtin_type_pychar,
1397 valpy_str): Use python_gdbarch and python_language instead of
1398 current_gdbarch and current_language.
1399 * python/python-type.c (typy_lookup_typename): Likewise.
1401 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
1403 * arch-utils.c (selected_byte_order): Return target_byte_order_user.
1404 (show_endian): Use target_byte_order_user if specified; otherwise
1405 use get_current_arch () instead of current_gdbarch.
1406 (show_architecture): Use set_architecture_string if specified;
1407 otherwise use get_current_arch () instead of current_gdbarch.
1408 (get_current_arch): New function.
1409 * arch-utils.h (get_current_arch): Add prototype.
1411 * osabi.c (show_osabi): Use get_current_arch () instead of
1414 * findcmd.c: Include "arch-utils.h".
1415 (parse_find_args): Add BIG_P argument. Use it instead of byte order
1417 (find_command): Use get_current_arch () instead of current_gdbarch.
1418 Pass byte order to parse_find_args.
1420 * maint.c: Include "arch-utils.h".
1421 (maintenance_print_architecture): Use get_current_arch () instead
1424 * reggroups.c: Include "arch-utils.h".
1425 (maintenance_print_reggroups): Use get_current_arch () instead
1428 * symfile.c: Include "arch-utils.h".
1429 (overlay_load_command): Use get_current_arch () instead of
1432 * value.c: Include "arch-utils.h".
1433 (show_convenience): Use get_current_arch () instead of
1436 * tui/tui-regs.c: Include "arch-utils.h".
1437 (tui_reg_next_command): Use get_current_arch () instead of
1440 * mi/mi-main.c: Include "arch-utils.h".
1441 (mi_cmd_data_read_memory): Use get_current_arch () instead of
1444 * parse.c: Include "arch-utils.h".
1445 (parse_exp_in_context): Use get_current_arch () instead of
1448 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
1450 * gdbtypes.c (make_pointer_type, make_reference_type,
1451 smash_to_memberptr_type, lookup_array_range_type, check_stub_method):
1452 Use type architecture instead of current_gdbarch.
1454 * gdbtypes.h (address_space_name_to_int, address_space_int_to_name):
1455 Add GDBARCH paramter.
1456 * gdbtypes.c (address_space_name_to_int, address_space_int_to_name):
1457 Add GDBARCH parameter. Use it instead of current_gdbarch.
1458 * c-typeprint.c (c_type_print_modifier): Update call.
1459 * parse.c (push_type_address_space): Likewise.
1461 * findvar.c (extract_typed_address, store_typed_address): Use type
1462 architecture instead of current_gdbarch.
1464 * value.c (value_as_address, unpack_field_as_long): Use type architecture
1465 instead of current_gdbarch.
1467 * doublest.c (floatformat_from_length): Add GDBARCH argument. Use it
1468 instead of current_gdbarch.
1469 (floatformat_from_type): Pass type architecture.
1471 * infcall.c (find_function_addr): Use type architecture instead
1474 * valarith.c (value_bitstring_subscript, value_x_binop, value_neg,
1475 value_bit_index): Use type architecture instead of current_gdbarch.
1476 * valops.c (value_cast, value_slice): Likewise.
1478 * value.h (modify_field): Add TYPE argument.
1479 * value.c (modify_field): Add TYPE argument. Use type architecture
1480 instead of current_gdbarch.
1481 (set_internalvar_component): Likewise.
1482 * eval.c (evaluate_struct_tuple): Update call.
1483 * valops.c (value_assign): Likewise.
1484 * ada-lang.c (modify_general_field): Likewise. Add TYPE argument.
1485 (make_array_descriptor): Update calls.
1486 (move_bits): Add BITS_BIG_ENDIAN_P argument. Use it instead of
1488 (ada_value_assign, value_assign_to_component): Update calls.
1489 (decode_packed_array, ada_value_primitive_packed_val, ada_value_assign,
1490 value_assign_to_component): Use type arch instead of current_gdbarch.
1492 * printcmd.c (float_type_from_length): Remove GDBARCH argument,
1493 use type architecture instead.
1494 (print_scalar_formatted, printf_command): Update calls. Use type
1495 architecture instead of current_gdbarch.
1496 * valprint.c (val_print_type_code_int): Use type architecture
1497 instead of current_gdbarch.
1498 * varobj.c (value_get_print_value): Likewise.
1499 * python/python-prettyprint.c (print_string_repr): Add GDBARCH
1500 argument. Use it instead of current_gdbarch.
1501 (apply_val_pretty_printer): Update call.
1503 * ada-valprint.c (ada_val_print_1): Use type architecture instead
1505 * c-valprint.c (print_function_pointer_address): Add GDBARCH argument.
1506 Use it instead of current_gdbarch.
1507 (c_val_print): Update calls passing type architecture.
1508 * f-valprint.c (f_val_print): Use type architecture instead of
1510 * jv-valprint (java_value_print): Likewise.
1511 * m2-valprint.c (print_function_pointer_address): Add GDBARCH argument.
1512 Use it instead of current_gdbarch.
1513 (print_unpacked_pointer): Update calls passing type architecture.
1514 * scm-valprint.c (scm_scmval_print): Use type architecture instead of
1517 * gnu-v3-abi.c (get_class_arch): Remove.
1518 (gnuv3_rtti_type): Use get_type_arch instead of get_class_arch. Remove
1519 special-case check for Java classes.
1520 (gnuv3_virtual_fn_field, gnuv3_baseclass_offset, gnuv3_print_method_ptr,
1521 gnuv3_method_ptr_size, gnuv3_make_method_ptr, gnuv3_method_ptr_to_value):
1522 Use get_type_arch instead of get_class_arch.
1524 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
1526 * gdbtypes.h (TYPE_OBJFILE_OWNED, TYPE_OWNER): New macros.
1527 (TYPE_OBJFILE, TYPE_ALLOC, TYPE_ZALLOC): Reimplement.
1528 (alloc_type_arch): Add prototype.
1529 (alloc_type_copy): Likewise.
1530 (get_type_arch): Likewise.
1531 (arch_type): Likewise.
1532 (arch_integer_type): Likewise.
1533 (arch_character_type): Likewise.
1534 (arch_boolean_type): Likewise.
1535 (init_float_type): Remove, replace by ...
1536 (arch_float_type): ... this.
1537 (init_complex_type): Remove, replace by ...
1538 (arch_complex_type): ... this.
1539 (init_flags_type): Remove, replace by ...
1540 (arch_flags_type): ... this.
1541 (init_composite_type): Remove, replace by ...
1542 (arch_composite_type): ... this.
1544 * gdbtypes.c (alloc_type): No longer support NULL objfile.
1545 (init_type): Likewise.
1546 (alloc_type_arch): New function.
1547 (alloc_type_copy): New function.
1548 (get_type_arch): New function.
1550 (smash_type): Preserve type ownership information.
1551 (make_pointer_type, make_reference_type, make_function_type,
1552 smash_to_memberptr_type, smash_to_method_type): No longer
1553 preserve OBJFILE across smash_type calls.
1554 (make_pointer_type, make_reference_type, make_function_type,
1555 lookup_memberptr_type, lookup_methodptr_type, allocate_stub_method,
1556 create_range_type, create_array_type, create_set_type, copy_type):
1557 Use alloc_type_copy when allocating types.
1558 (check_typedef): Use alloc_type_arch.
1559 (copy_type_recursive): Likewise. Preserve type ownership data
1561 (recursive_dump_type): Dump type ownership data.
1562 (alloc_type_instance): Update type ownership check.
1563 (copy_type, copy_type_recursive): Likewise.
1565 (arch_type): New function.
1566 (arch_integer_type): Likewise.
1567 (arch_character_type): Likewise.
1568 (arch_boolean_type): Likewise.
1569 (init_float_type): Remove, replace by ...
1570 (arch_float_type): ... this.
1571 (init_complex_type): Remove, replace by ...
1572 (arch_complex_type): ... this.
1573 (init_flags_type): Remove, replace by ...
1574 (arch_flags_type): ... this.
1575 (append_flags_type_flag): Move down.
1576 (init_composite_type): Remove, replace by ...
1577 (arch_composite_type): ... this.
1578 (append_composite_type_field_aligned,
1579 append_composite_type_field): Move down.
1581 * gdbarch.c (gdbtypes_post_init): Allocate all types
1582 using per-architecture routines.
1583 * ada-lang.c (ada_language_arch_info): Likewise.
1584 * f-lang.c (build_fortran_types): Likewise.
1585 * jv-lang.c (build_java_types): Likewise.
1586 * m2-lang.c (build_m2_types): Likewise.
1587 * scm-lang.c (build_scm_types): Likewise.
1589 * ada-lang.c (ada_type_of_array): Use alloc_type_copy.
1590 (packed_array_type): Likewise.
1591 (ada_template_to_fixed_record_type_1): Likewise.
1592 (template_to_static_fixed_type): Likewise.
1593 (to_record_with_fixed_variant_part): Likewise.
1594 (to_fixed_variant_branch_type): Likewise.
1595 (to_fixed_array_type): Likewise.
1596 (to_fixed_range_type): Likewise.
1597 (empty_record): Use type instead of objfile argument.
1598 Use alloc_type_copy.
1599 (to_fixed_variant_branch_type): Update call to empty_record.
1600 * jv-lang.c (type_from_class): Use alloc_type_arch.
1602 * arm-tdep.c (arm_ext_type): Allocate per-architecture type.
1603 * i386-tdep.c (i386_eflags_type, i386_mxcsr_type, i387_ext_type,
1604 i386_mmx_type, i386_sse_type): Likewise.
1605 * ia64-tdep.c (ia64_ext_type): Likewise.
1606 * m32c-tdep.c (make_types): Likewise.
1607 * m68k-tdep.c (m68k_ps_type, m68881_ext_type): Likewise.
1608 * rs6000-tdep.c (rs6000_builtin_type_vec64,
1609 rs6000_builtin_type_vec128): Likewise.
1610 * sparc-tdep.c (sparc_psr_type, sparc_fsr_type): Likewise.
1611 * sparc64-tdep.c (sparc64_pstate_type, sparc64_fsr_type,
1612 sparc64_fprs_type): Likewise.
1613 * spu-tdep.c (spu_builtin_type_vec128): Likewise.
1614 * xtensa-tdep.c (xtensa_register_type): Likewise.
1615 * linux-tdep.c (linux_get_siginfo_type): Likewise.
1616 * target-descriptions.c (tdesc_gdb_type): Likewise.
1617 * gnu-v3-abi.c (build_gdb_vtable_type): Likewise.
1619 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
1621 * i386-tdep.h (struct gdbarch_tdep): Add i386_eflags_type and
1622 i386_mxcsr_type members.
1623 (i386_eflags_type): Make into function.
1624 (i386_mxcsr_type): Likewise.
1625 * i386-tdep.c (i386_eflags_type): Make into function.
1626 (i386_mxcsr_type): Likewise.
1627 (i386_register_type): Update uses.
1628 (i386_init_types): Remove.
1629 (_initialize_i386_tdep): Do not call it.
1630 * amd64-tdep.c (amd64_register_type): Update uses.
1632 * m68k-tdep.h (struct gdbarch_tdep): Add m68k_ps_type member.
1633 * m68k-tdep.c (m68k_ps_type): Make into function.
1634 (m68k_register_type): Update use.
1635 (m68k_init_types): Remove.
1636 (_initialize_m68k_tdep): Do not call it.
1638 * sparc-tdep.h (struct gdbarch_tdep): Add sparc_psr_type,
1639 sparc_fsr_type, sparc64_pstate_type, sparc64_fsr_type, and
1640 sparc64_fprs_type members.
1641 * sparc-tdep.c (sparc_psr_type): Make into function.
1642 (sparc_fsr_type): Likewise.
1643 (sparc32_register_type): Update uses.
1644 (sparc_init_types): Remove.
1645 (_initialize_sparc_tdep): Do not call it.
1646 * sparc64-tdep.c (sparc64_pstate_type): Make into function.
1647 (sparc64_fsr_type): Likewise.
1648 (sparc64_fprs_type): Likewise.
1649 (sparc64_register_type): Update uses.
1650 (sparc64_init_types): Remove.
1651 (_initialize_sparc64_tdep): Likewise.
1653 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
1655 * gdbtypes.h (builtin_type_ieee_single, builtin_type_ieee_double,
1656 builtin_type_i387_ext, builtin_type_m68881_ext, builtin_type_arm_ext,
1657 builtin_type_ia64_spill, builtin_type_ia64_quad): Remove.
1658 (init_float_type, init_complex_type): Add prototypes.
1659 * gdbtypes.c (builtin_type_ieee_single, builtin_type_ieee_double,
1660 builtin_type_i387_ext, builtin_type_m68881_ext, builtin_type_arm_ext,
1661 builtin_type_ia64_spill, builtin_type_ia64_quad): Remove.
1662 (_initialize_gdbtypes): Do not initialize them.
1663 (build_flt): Rename to ...
1664 (init_float_type): ... this. Make global.
1665 (build_complex): Rename to ...
1666 (init_complex_type): ... this. Make global. Remove BIT argument.
1667 (gdbtypes_post_init): Update calls.
1669 * ada-lang.c (ada_language_arch_info): Use init_float_type.
1670 * jv-lang.c (build_java_types): Likewise.
1671 * m2-lang.c (build_m2_types): Likewise.
1672 * f-lang.c (build_fortran_types): Use init_float_type and
1675 * target-descriptions.c (tdesc_gdb_type): Call init_float_type instead
1676 of using builtin_type_ieee_single, builtin_type_ieee_double, or
1677 builtin_type_arm_ext.
1679 * ia64-tdep.h (struct gdbarch_tdep): Add ia64_ext_type member.
1680 * ia64-tdep.c (builtin_type_ia64_ext): Remove.
1681 (_initialize_ia64_tdep): Do not initialize it.
1682 (floatformat_valid, floatformat_ia64_ext, floatformats_ia64_ext):
1684 (ia64_ext_type): New function.
1685 (ia64_register_reggroup_p, ia64_convert_register_p,
1686 ia64_register_to_value, ia64_value_to_register,
1687 ia64_extract_return_value, ia64_store_return_value): Use ia64_ext_type
1688 instead of builtin_type_ia64_ext.
1690 * i386-tdep.h (struct gdbarch_tdep): Add i387_ext_type member.
1691 (i387_ext_type): Add prototype.
1692 * i386-tdep.c (i387_ext_type): New function.
1693 (i386_extract_return_value, i386_store_return_value,
1694 i386_register_type): Use it instead of builtin_type_i387_ext.
1695 * amd64-tdep.c (amd64_register_type): Likewise.
1696 * i387-tdep.c (print_i387_value, i387_register_to_value,
1697 i387_value_to_register): Likewise.
1698 (print_i387_value, print_i387_ext): Add GDBARCH argument.
1699 (print_i387_ext, i387_print_float_info): Pass to subroutines.
1701 * m68k-tdep.h (struct gdbarch_tdep): Add m68881_ext_type member.
1702 * m68k-tdep.c (m68881_ext_type): New function.
1703 (m68k_register_type, m68k_convert_register_p): Use it instead
1704 of builtin_type_m68881_ext.
1706 * arm-tdep.h (struct gdbarch_tdep): Add arm_ext_type member.
1707 * arm-tdep.c (arm_ext_type): New function.
1708 (arm_register_type): Use it instead of builtin_type_arm_ext.
1710 * alpha-tdep.c (alpha_register_type): Use builtin types
1711 instead of builtin_type_ieee_double.
1713 * mips-tdep.c (mips_float_register_type, mips_double_register_type):
1715 (mips_register_type): Use builtin types instead of
1716 builtin_type_ieee_single and builtin_type_ieee_double.
1717 (mips_print_fp_register): Use builtin types instead of
1718 mips_float_register_type and mips_double_register_type.
1720 * hppa-tdep.c (hppa32_register_type, hppa64_register_type):
1721 Use builtin types instead of builtin_type_ieee_single and
1722 builtin_type_ieee_double.
1724 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
1726 * gdbtypes.h (builtin_type_int0, builtin_type_int8, builtin_type_uint8,
1727 builtin_type_int16, builtin_type_uint16, builtin_type_int32,
1728 builtin_type_uint32, builtin_type_int64, builtin_type_uint64,
1729 builtin_type_int128, builtin_type_uint128): Remove.
1730 (struct builtin_type): New members builtin_int0, builtin_int8,
1731 builtin_uint8, builtin_int16, builtin_uint16, builtin_int32,
1732 builtin_uint32, builtin_int64, builtin_uint64, builtin_int128,
1733 and builtin_uint128.
1734 * gdbtypes.c (builtin_type_int0, builtin_type_int8, builtin_type_uint8,
1735 builtin_type_int16, builtin_type_uint16, builtin_type_int32,
1736 builtin_type_uint32, builtin_type_int64, builtin_type_uint64,
1737 builtin_type_int128, builtin_type_uint128): Remove.
1738 (_initialize_gdbtypes): Do not initialize them.
1739 (gdbtypes_post_init): Initialize fixed-size integer types.
1741 * dwarf2expr.c (unsigned_address_type, signed_address_type): Add
1742 GDBARCH argument. Return platform-specific type.
1743 (dwarf2_read_address, execute_stack_op): Update calls.
1745 * target-descriptions.c (tdesc_gdb_type): Use platform-specific types
1746 instead of global builtin_int_... variables.
1747 * mi/mi-main.c (mi_cmd_data_read_memory): Likewise.
1748 * printcmd.c (do_examine): Likewise.
1749 * jv-exp.y (parse_number): Likewise.
1751 * alpha-tdep.c (alpha_register_type, alpha_push_dummy_call,
1752 alpha_store_return_value): Likewise.
1753 * amd64-linux-tdep.c (amd64_linux_register_type): Likewise.
1754 * amd64-tdep.c (amd64_register_type): Likewise.
1755 * arm-tdep.c (arm_register_type): Likewise.
1756 * avr-tdep.c (avr_register_type): Likewise.
1757 * cris-tdep.c (cris_register_type, crisv32_register_type): Likewise.
1758 * frv-tdep.c (frv_register_type): Likewise.
1759 * h8300-tdep.c h8300_register_type): Likewise.
1760 * hppa-tdep.c (hppa64_push_dummy_call, hppa32_register_type,
1761 hppa64_register_type): Likewise.
1762 * i386-tdep.c (i386_mmx_type, i386_sse_type): Likewise.
1763 * iq2000-tdep.c (iq2000_register_type): Likewise.
1764 * lm32-tdep.c (lm32_register_type, lm32_push_dummy_call): Likewise.
1765 * m32r-tdep.c (m32r_register_type): Likewise.
1766 * m68hc11-tdep.c (m68hc11_register_type, m68hc11_pseudo_register_read,
1767 m68hc11_pseudo_register_write): Likewise.
1768 * m68k-tdep.c (m68k_register_type): Likewise.
1769 * m88k-tdep.c (m88k_register_type, m88k_store_arguments): Likewise.
1770 * mep-tdep.c (mep_register_type): Likewise.
1771 * mips-tdep.c (mips_register_type, mips_pseudo_register_type,
1772 mips_print_fp_register): Likewise.
1773 * moxie-tdep.c (moxie_register_type): Likewise.
1774 * mt-tdep.c (mt_copro_register_type, mt_register_type): Likewise.
1775 * rs6000-tdep.c (rs6000_builtin_type_vec64,
1776 rs6000_builtin_type_vec128): Likewise.
1777 * score-tdep.c (score_register_type): Likewise.
1778 * sparc-tdep.c (sparc32_register_type, sparc32_store_arguments):
1780 * sparc64-tdep.c (sparc64_register_type, sparc64_store_arguments):
1782 * spu-tdep.c (spu_builtin_type_vec128, spu_register_type): Likewise.
1783 * v850-tdep.c (v850_register_type): Likewise.
1784 * xstormy16-tdep.c (xstormy16_register_type): Likewise.
1785 * xtensa-tdep.c (xtensa_register_type): Likewise.
1787 * mt-tdep.c (struct gdbarch_tdep): New data structure.
1788 (mt_gdbarch_init): Alloc TDEP structures.
1789 (mt_register_type): Cache coprocessor type in TDEP instead of
1790 static global variable.
1792 * xtensa-tdep.h (struct gdbarch_tdep): Add type_entries member.
1793 * xtensa-tdep.c (type_entries): Remove.
1794 (xtensa_register_type): Cache fixed-size types in TDEP instead
1795 of in global variable.
1797 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
1799 * gdbtypes.h (builtin_type_true_char): Remove.
1800 (builtin_type_true_unsigned_char): Likewise.
1801 (struct builtin_type): Add builtin_true_char and
1802 builtin_true_unsigned_char members.
1803 * gdbtypes.c (builtin_type_true_char): Remove.
1804 (builtin_type_true_unsigned_char): Likewise.
1805 (_initialize_gdbtypes): Do not initialize them.
1806 (gdbtypes_post_init): Initialize builtin_true_char and
1807 builtin_true_unsigned_char members of builtin_type.
1809 * printcmd.c (print_scalar_formatted): Use builtin_type
1810 members instead of builtin_type_true_char and
1811 builtin_type_true_unsigned_char.
1812 * ada-valprint.c (ada_val_print_1): Likewise.
1814 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
1816 * gdbtypes.h (builtin_type_void): Remove.
1817 * gdbtypes.c (builtin_type_void): Remove.
1818 (_initialize_gdbtypes): Do not initialize it.
1820 (safe_parse_type): Add GDBARCH argument. Use it to construct
1822 (check_stub_method): Update call.
1824 * infcall.c (call_function_by_hand): Use platform-specific type
1825 instead of builtin_type_void.
1826 * valops.c (value_cast): Use input void type instead of
1829 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
1831 * ada-lang.c (assign_component): Use platform-specific integer type
1832 instead of builtin_type_int32 type.
1833 (ada_evaluate_subexp) [OP_ATR_SIZE]: Likewise.
1835 * ax-gdb.c (gen_expr) [UNOP_NEG]: Use platform-specific integer type
1836 instead of builtin_type_int8 type.
1837 * valarith.c (value_x_unop): Likewise.
1838 * python/python-value.c (valpy_absolute): Avoid reference to
1839 builtin_type_int8 type.
1841 * eval.c (evaluate_subexp_standard): Use platform-specific integer
1842 type instead of builtin_type_int8 as EVAL_SKIP return value type.
1843 * ada-lang.c (ada_evaluate_subexp): Likewise.
1844 * jv-lang.c (evaluate_subexp_java): Likewise.
1845 * m2-lang.c (evaluate_subexp_modula2): Likewise.
1846 * scm-lang.c (evaluate_exp): Likewise.
1848 * value.h (value_bitstring): Add INDEX_TYPE argument.
1849 * valops.c (value_bitstring): Add INDEX_TYPE argument, use it instead
1850 of builtin_type_int32 as base range type.
1851 * eval.c (evaluate_subexp_standard): Update value_bitstring call.
1853 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
1855 * gdbtypes.c (lookup_array_range_type): Add prototype.
1856 (lookup_string_range_type): Likewise.
1857 * gdbtypes.c (lookup_array_range_type): New function.
1858 (lookup_string_range_type): Likewise.
1860 * ax-gdb.c (gen_repeat): Use lookup_array_range_type.
1861 * parse.c (follow_types): Likewise.
1862 * jv-lang.c (java_array_type): Likewise.
1863 * gnu-v3-abi.c (build_gdb_vtable_type): Likewise.
1864 * mt-tdep.c (mt_register_type): Likewise.
1865 * sh-tdep.c (sh_sh4_build_float_register_type): Likewise.
1866 * sh64-tdep.c (sh64_build_float_register_type): Likewise.
1867 * value.c (allocate_repeat_value): Likewise.
1868 * valops.c (value_array, value_cstring): Likewise.
1869 * valops.c (value_string): Use lookup_string_range_type.
1871 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
1873 * m2-typeprint.c (m2_print_bounds, m2_is_long_set_of_type): Remove
1874 redundant check for NULL TYPE_TARGET_TYPE.
1875 * m2-valprint.c (m2_print_long_set): Likewise.
1876 * p-valprint.c (pascal_type_print_base): Likewise.
1878 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
1880 * printcmd.c (next_gdbarch): New static variable.
1881 (set_next_address, do_examine, x_command): Set it.
1882 (decode_format): Use 'a' size to indicate width of an address.
1883 (do_examine): Add GDBARCH argument. Handle 'a' size.
1884 (x_command): Pass architecture to do_examine.
1885 Error if called without argument the first time.
1886 (do_one_display): Pass architecture to do_examine.
1888 (examine_i_type, examine_b_type, examine_h_type, examine_w_type,
1889 examine_g_type): Remove.
1890 (_initialize_printcmd): Do not initialize them.
1891 (do_examine): Use builin_type_int... instead of examine_..._type.
1893 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
1895 * gdbtypes.h (struct builtin_type): Add internal_fn member.
1896 * gdbtypes.c (gdbtypes_post_init): Initialize it.
1897 * value.c (internal_fn_type): Remove.
1898 (_initialize_values): Do not initialize it.
1900 * value.c (struct internalvar): Add enum internalvar_kind type and
1901 kind member. Restructure union internalvar_data type. Remove type,
1902 canonical, and make_value members.
1903 (init_if_undefined_command): Update for data structure changes.
1904 (create_internalvar): Likewise.
1905 (create_internalvar_type_lazy): Likewise.
1906 (get_internalvar_integer): Likewise.
1907 (get_internalvar_function): Likewise.
1908 (set_internalvar_component): Likewise.
1909 (set_internalvar): Likewise.
1910 (set_internalvar_integer): Likewise.
1911 (set_internalvar_function): Likewise.
1912 (clear_internalvar): Likewise.
1913 (add_internal_function): Likewise.
1914 (preserve_one_internalvar): New function.
1915 (preserve_values): Call it.
1917 * value.h (value_of_internalvar): Add GDBARCH parameter.
1918 (internalvar_make_value): Likewise.
1919 * value.c (value_of_internalvar): Add GDBARCH parameter. Pass it to
1920 make_value callback. Use it to generate per-architecture result value
1921 types for internal variables with no pre-defined type. Update for data
1923 (show_convenience): Pass architecture to value_of_internalvar.
1924 * eval.c (evaluate_subexp_standard): Likewise.
1925 * infrun.c (siginfo_make_value): Add GDBARCH parameter. Use it
1926 instead of current frame architecture. Return per-architecture type.
1928 * value.h (set_internalvar_string): Add prototype.
1929 * value.c (set_internalvar_string): New function.
1930 * tracepoint.c (set_traceframe_context): Use it.
1932 2009-07-02 Ulrich Weigand <uweigand@de.ibm.com>
1934 * jv-lang.h (java_int_type, java_byte_type, java_short_type,
1935 java_long_type, java_boolean_type, java_char_type, java_float_type,
1936 java_double_type, java_void_type): Remove.
1937 (struct builtin_java_type): New data type.
1938 (builtin_java_type): Add prototype.
1939 (java_primitive_type): Add GDBARCH argument.
1940 (java_primitive_type_from_name): Likewise.
1941 (type_from_class): Likewise.
1943 * jv-lang.c (java_int_type, java_byte_type, java_short_type,
1944 java_long_type, java_boolean_type, java_char_type, java_float_type,
1945 java_double_type, java_void_type): Remove.
1947 (build_java_types, builtin_java_type): New functions.
1948 (java_type_data): New static variable.
1949 (_initialize_java_language): Initialize it. No longer initialize
1951 (java_language_arch_info): Use per-architecture types.
1953 (java_primitive_type): Add GDBARCH argument. Return per-architecture
1954 type instead of refering to global variable.
1955 (java_primitive_type_from_name): Add GDBARCH argument.
1956 (java_primitive_type_name): New function.
1957 (java_demangled_signature_length): Use it instead of
1958 java_primitive_type_from_name.
1959 (java_demangled_signature_copy): Likewise.
1961 (type_from_class): Add GDBARCH argument. Pass to java_link_class_type,
1962 java_primitive_type, and recursive type_from_class call.
1963 (java_link_class_type): Add GDBARCH argument. Pass to type_from_class
1964 calls. Use per-architecture types instead of global types.
1966 * jv-exp.y (parse_java_type): New define.
1967 Use per-architecture types instead of global types througout.
1969 * jv-valprint.c (java_value_print): Pass architecture to
1970 type_from_class and java_primitive_type_from_name. Use per-
1971 architecture types instead of global types.
1973 2009-07-01 Doug Evans <dje@google.com>
1975 * NEWS: Mention biarch amd64-linux gdbserver and hardware watchpoint
1976 support for i386-linux, amd64-linux, and i386-win32 builds of
1979 2009-07-01 Nick Roberts <nickrob@snap.net.nz>
1981 * Makefile.in (HFILES_NO_SRCDIR): Remove entries for deleted files.
1983 2009-06-30 Jan Kratochvil <jan.kratochvil@redhat.com>
1985 * Makefile.in (TARGET_FLAGS_TO_PASS): Include also FORCE_PARALLEL.
1986 (check//%): Construct FORCE_PARALLEL for the sub-make. Extend the
1989 2009-06-30 Paul Pluzhnikov <ppluzhnikov@google.com>
1992 * dwarf2-frame.c (dwarf2_frame_state): Move cfa_offset, cfa_reg,
1993 cfa_how and cfa_exp into regs and adjust users.
1995 2009-06-30 Daniel Jacobowitz <dan@codesourcery.com>
1997 * dwarf2read.c (inherit_abstract_dies): Work around GCC PR 40573.
1999 2009-06-30 Vladimir Prus <vladimir@codesourcery.com>
2001 * mi/mi-cmd-stack.c (parse_print_values): New.
2002 (mi_cmd_stack_list_locals, mi_cmd_stack_list_args): Use the above.
2004 2009-06-30 Vladimir Prus <vladimir@codesourcery.com>
2006 * varobj.c (varobj_get_type): Use type_to_string.
2008 2009-06-29 Pedro Alves <pedro@codesourcery.com>
2010 * infrun.c (handle_inferior_event): Context switch to the new
2011 thread when resuming for a new_thread_event.
2013 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
2015 * ada-lang.h (ada_convert_actual): Add GDBARCH argument.
2016 * ada-lang.c (convert_actual): Remove stale prototype.
2017 (ensure_lval, make_array_descriptor, ada_convert_actual):
2018 Add GDBARCH argument and pass through to subroutine calls.
2019 (ensure_lval): Use GDBARCH instead of current_gdbarch.
2020 * infcall.c (value_arg_coerce): Update ada_convert_actual call.
2022 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
2024 * ada-lang.c (resolve): Use per-architecture void type instead
2025 of platform-independent one.
2026 (ada_evaluate_subexp) [STRUCTOP_STRUCT]: Likewise.
2027 (ada_resolve_function): Reimplement fallback logic to avoid
2028 explicit reference to builtin_type_void.
2030 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
2032 * ada-valprint.c (ada_print_scalar): Accept NULL type argument
2033 to indicate scalar should be printed as default integer.
2034 (print_optional_low_bound): Pass NULL to ada_print_scalar to
2035 indicate default integer output.
2036 * ada-typeprint.c (print_range, print_range_bound): Likewise.
2037 (print_choices): Likewise. Thus, accept NULL as val_type.
2038 * ada-lang.c (ada_variant_discrim_type): Return NULL when failed
2039 to look up controlling discriminant name.
2041 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
2043 * ada-lang.c (to_fixed_range_type): Add ORIG_TYPE argument.
2044 Fall back to orig_type as index type if symbol lookup fails.
2045 Allocate result types from ORIG_TYPE's objfile.
2046 (ada_array_bound_from_type, to_fixed_array_type,
2047 ada_evaluate_subexp): Pass original index type to
2048 to_fixed_range_type. Do not pass objfile.
2050 * ada-typeprint.c (print_range_type_named): Add ORIG_TYPE argument.
2051 Fall back to orig_type as index type if symbol lookup fails.
2052 (print_array_type, ada_print_type): Pass original index type
2053 to print_range_type_named.
2055 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
2057 * ada-lang.c (ada_index_type): Update comment.
2059 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
2061 * ada-lang.c (ada_index_type): Make static. Add NAME argument.
2062 Throw error on invalid input arguments. Return NULL if unable
2063 to determine index type.
2065 (ada_array_bound_from_type): Remove TYPEP argument.
2066 (ada_array_bound): Make static. Return LONGEST instead of value.
2067 Update for ada_array_bound_from_type change.
2068 (ada_array_length): Return LONGEST instead of value.
2069 Update for ada_array_bound_from_type change.
2070 (make_array_descriptor): Update for ada_array_bound change.
2072 (ada_evaluate_subexp) [OP_ATR_RANGE, OP_ATR_FIRST, OP_ATR_LAST,
2073 OP_ATR_LENGTH]: Update for ada_array_bound_from_type,
2074 ada_array_bound, ada_array_length, ada_index_type changes.
2075 Always use ada_index_type to compute result type; fall back
2076 to architecture-specific integer type if ada_index_type fails.
2078 * ada-lang.h (ada_index_type): Remove prototype.
2079 (ada_array_bound): Likewise.
2081 2009-06-29 Pedro Alves <pedro@codesourcery.com>
2083 * dbxread.c (read_dbx_symtab): Clear has_line_numbers when ending
2086 2009-06-29 Tom Tromey <tromey@redhat.com>
2088 * README: Mention parallel check.
2090 2009-06-29 Sami Wagiaalla <swagiaal@redhat.com>
2092 * dwarf2read.c (read_import_statement): Properly set import location
2094 * cp-support.h (cp_add_using, cp_add_using_directive): Now take char*
2095 inner, char* outer arguments. Updated callers.
2097 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
2099 * value.h (value_subscript, value_subscripted_rvalue,
2100 value_bitstring_subscript, value_ptradd): Use LONGEST instead
2101 of value as type of the index argument.
2102 (value_ptrsub): Remove.
2103 * valarith.c (value_subscript, value_subscripted_rvalue,
2104 value_bitstring_subscript, value_ptradd): Use LONGEST instead
2105 of value as type of the index argument.
2106 (value_ptrsub): Remove.
2108 * wrapper.h (gdb_value_subscript): Use LONGEST instead of
2109 value as type of the index argument.
2110 * wrapper.c (gdb_value_subscript): Likewise.
2112 Update calls to gdb_value_subscript, value_subscript,
2113 value_subscripted_rvalue, value_bitstring_subscript and
2114 value_ptradd to use LONGEST instead of value as index
2115 argument type. Use value_ptradd instead of value_ptrsub.
2116 * ada-lang.c (ada_value_subscript, ada_value_ptr_subscript,
2117 ada_tag_name_2): Update.
2118 * ada-tasks.c (read_atcb): Update.
2119 * eval.c (evaluate_subexp_standard): Update.
2120 * valarith.c (value_subscript): Update.
2121 * gnu-v2-abi.c (gnuv2_virtual_fn_field): Update.
2122 * gnu-v3-abi.c (gnuv3_get_virtual_fn, gnuv3_baseclass_offset,
2123 gnuv3_method_ptr_to_value): Update.
2124 * jv-lang.c (evaluate_subexp_java): Update.
2125 * m2-lang.c (evaluate_subexp_modula2): Update.
2126 * python/python-value.c (valpy_getitem, valpy_binop): Update.
2127 * wrapper.c (gdb_value_subscript): Update.
2128 * varobj.c (c_describe_child): Update.
2130 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
2132 * gdbtypes.h (make_function_type): Remove OBJFILE parameter.
2133 * gdbtypes.c (make_function_type): Remove OBJFILE parameter.
2134 (lookup_function_type): Update call.
2135 * stabsread.c (read_type): Likewise.
2136 * dwarf2read.c (read_subroutine_type): Use lookup_function_type
2137 instead of make_function_type.
2138 * jv-lang.c (type_from_class): Likewise. Do not allocate types
2139 on the fake "dynamics" obstack.
2141 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
2143 * gdbtypes.h (struct builtin_type): Remove builtin_core_addr,
2144 nodebug_text_symbol, nodebug_data_symbol, nodebug_unknown_symbol,
2145 and nodebug_tls_symbol members.
2146 (struct objfile_type): New data structure.
2147 (objfile_type): Add prototype.
2148 * gdbtypes.c (gdbtypes_post_init): Remove initialization code
2149 for types no longer in struct builtin_type.
2150 (objfile_type_data): New static variable.
2151 (_initialize_gdbtypes): Initialize it.
2152 (objfile_type): New function.
2154 * gdbtypes.h (builtin_type_error): Remove.
2155 * gdbtypes.c (build_complex): Do not use builtin_type_error.
2156 * symtab.c (builtin_type_error): Remove.
2157 (_initialize_symtab): Remove initialization.
2159 * stabsread.c (dbx_lookup_type, define_symbol, error_type,
2160 rs6000_builtin_type, read_range_type): Use per-objfile types
2161 instead of global or per-architecture builtin types.
2162 * coffread.c (decode_type): Likewise.
2163 * dwarf2read.c (read_array_type, read_tag_string_type,
2164 new_symbol, die_type): Likewise.
2165 * mdebugread.c (parse_symbol, basic_type, upgrade_type,
2166 parse_procedure, psymtab_to_symtab_1): Likewise.
2167 * xcoffread.c (process_xcoff_symbol): Likewise.
2168 * parse.c (write_exp_msymbol): Likewise.
2170 * stabsread.c (rs6000_builtin_type_data): New static variable.
2171 (_initialize_stabsread): Initialize it.
2172 (rs6000_builtin_type): Add OBJFILE argument. Allocate builtin
2173 types per-objfile instead of globally.
2175 * stabsread.c (dbx_lookup_type): Add OBJFILE argument. Use it
2176 instead of current_objfile; pass it to rs6000_builtin_type.
2177 (dbx_alloc_type, read_type, read_range_type): Update calls.
2178 (cleanup_undefined_types_noname): Add OBJFILE argument and
2179 pass it to dbx_lookup_type.
2180 (cleanup_undefined_types): Add OBJFILE argument and pass it
2181 to cleanup_undefined_types_noname.
2182 * stabsread.h (cleanup_undefined_types): Add OBJFILE argument.
2183 * buildsym.c (end_symtab): Update call.
2185 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
2187 * darwin-nat-info.c (darwin_debug_regions_recurse): Use
2188 target_gdbarch instead of current_gdbarch.
2190 2009-06-29 Ulrich Weigand <uweigand@de.ibm.com>
2192 * Makefile.in (ALL_64_TARGET_OBS): Add amd64-windows-tdep.o.
2193 (ALL_TARGET_OBS): Add moxie-tdep.o, i386-darwin-tdep.o, and
2196 * configure.tgt: Add comment.
2198 2009-06-28 Paul Pluzhnikov <ppluzhnikov@google.com>
2200 * mi/mi-cmds.c (mi_cmds): Remove unimplemented entries.
2202 2009-06-27 Daniel Jacobowitz <dan@codesourcery.com>
2203 Jan Kratochvil <jan.kratochvil@redhat.com>
2205 * NEWS: Document inlined function support.
2206 * Makefile.in (SFILES): Add inline-frame.c.
2207 (COMMON_OBS): Add inline-frame.o.
2208 * block.c (contained_in): Rewrite to use lexical nesting.
2209 (block_linkage_function): Skip inlined function blocks.
2210 (block_inlined_p): New.
2211 * block.h (struct block): Update comment.
2212 (block_inlined_p): New prototype.
2213 * blockframe.c (get_frame_block): Handle inlined functions.
2214 (get_frame_function): Do not use block_linkage_function.
2215 (block_innermost_frame): Use get_frame_block and contained_in.
2216 * breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache.
2217 Skip over inlined functions. Simplify epilogue check.
2218 (bpstat_check_breakpoint_conditions): Use get_stack_frame_id.
2220 (set_momentary_breakpoint): Only accept non-inlined frames.
2221 (watch_command_1): Use frame_unwind_caller_pc and
2222 frame_unwind_caller_id instead of get_prev_frame.
2223 (until_break_command): Likewise. Use get_stack_frame_id.
2224 * buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions.
2225 * dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function.
2226 * dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine.
2227 (read_func_scope, new_symbol): Likewise. Handle arguments specially
2228 for inlined functions without call site information.
2229 (inherit_abstract_dies): Allow tag mismatch for inlined subroutines.
2230 (die_specification): Treat DW_AT_abstract_origin as a specification.
2231 (read_type_die): Handle DW_TAG_inlined_subroutine.
2232 * frame-unwind.c (frame_unwind_init): Add inline_frame_unwind.
2233 * frame.c (fprint_frame_id): Print inline depth.
2234 (fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME.
2235 (skip_inlined_frames, get_stack_frame_id): New.
2236 (frame_unwind_caller_id): Use skip_inlined_frames.
2237 (frame_id_inlined_p): New.
2238 (frame_id_eq): Make the logic match the comments. Add inline_depth
2240 (frame_id_inner): Handle inlined functions.
2241 (frame_unwind_pc): New function, copied from frame_unwind_caller_pc.
2242 (frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc.
2243 (get_prev_frame_1): Check for inline frames. Split out frame
2244 allocation to get_prev_frame_raw.
2245 (get_prev_frame_raw): New function.
2246 (get_prev_frame): Handle inline frames.
2247 (get_frame_pc): Use frame_unwind_pc.
2248 (get_frame_address_in_block): Skip inlined frames on both sides.
2249 (pc_notcurrent): Delete.
2250 (find_frame_sal): Rewrite to handle inline call sites. Use
2251 get_frame_address_in_block.
2252 (deprecated_update_frame_pc_hack): Make static.
2253 * frame.h: Update comments.
2254 (struct frame_id): Add inline_depth.
2255 (enum frame_type): Add INLINE_FRAME.
2256 (frame_id_inlined_p, get_stack_frame_id): New prototypes.
2257 * gdbthread.h (struct thread_info): Add step_stack_frame_id field.
2258 * infcmd.c (set_step_frame): New function.
2259 (step_once): Use set_step_frame. Handle inlined functions.
2260 (until_next_command): Use set_step_frame.
2261 (finish_backward), finish_forward): Use get_stack_frame_id.
2262 (finish_command): Support inlined functions.
2263 * inferior.h (set_step_info): New prototype.
2264 * infrun.c (RESUME_ALL): Use minus_one_ptid.
2265 (clear_proceed_status): Clear step_stack_frame_id.
2266 (init_wait_for_inferior): Call clear_inline_frame_state.
2267 (init_execution_control_state): Make static.
2268 (set_step_info): New function.
2269 (init_thread_stepping_state): Do not set the symtab or line here.
2270 (stepped_in_from): New function.
2271 (handle_inferior_event): Handle inlined functions. Use set_step_info.
2272 (insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id.
2273 (struct inferior_status): Add step_stack_frame_id.
2274 (save_inferior_status, restore_inferior_status): Save and restore
2275 step_stack_frame_id.
2276 * inline-frame.c, inline-frame.h: New files.
2277 * minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC.
2278 * regcache.c (regcache_write_pc): Call reinit_frame_cache.
2279 * s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME.
2280 * stack.c (frame_show_address): New.
2281 (print_frame_info, print_frame): Use it.
2282 (find_frame_funname): Use get_frame_function. Handle inlined blocks.
2283 (frame_info): Mark inlined functions.
2284 (backtrace_command_1): Use get_current_user_frame.
2285 (print_frame_local_vars, print_frame_label_vars): Update comments.
2286 (return_command): Refuse inlined functions.
2287 * symtab.c (lookup_symbol_aux_local): Stop at inlined function
2289 (find_function_start_sal): Avoid inlined functions.
2290 (completion_list_add_fields): New function.
2291 (default_make_symbol_completion_list): Use it. Use block_static_block
2292 and block_global_block. Check for inlined functions.
2293 (skip_prologue_using_sal): Avoid line number comparison across
2295 * symtab.h (struct symbol): Add is_inlined.
2296 (SYMBOL_INLINED): New.
2297 * target.c (target_resume): Call clear_inline_frame_state.
2298 * valops.c (value_of_variable): Check block_inlined_p.
2300 2009-06-27 Daniel Jacobowitz <dan@codesourcery.com>
2302 * frame.c (frame_unwind_id): Renamed to ...
2303 (frame_unwind_caller_id): ... this. All callers updated.
2304 (frame_pc_unwind): Renamed to ...
2305 (frame_unwind_caller_pc): ... this. All callers updated.
2306 * frame.h: Document frame_unwind_caller_WHAT functions.
2307 (frame_unwind_id): Renamed to ...
2308 (frame_unwind_caller_id): ... this.
2309 (frame_pc_unwind): Renamed to ...
2310 (frame_unwind_caller_pc): ... this.
2311 * hppa-tdep.c (hppa_find_unwind_entry_in_block): Correct comment.
2312 * stack.c (parse_frame_specification_1): Do not rely on
2315 2009-06-27 Michael Snyder <msnyder@vmware.com>
2317 * infrun.c (handle_inferior_event): Improve handling of
2318 reverse-stepping into and over shared library functions.
2320 2009-06-25 Karen Osmond <karen.osmond@gmail.com>
2322 * linespec.c (find_method): Add new not_found_ptr parameter to
2323 bring in line with symtab_from_filename, decode_variable.
2324 (decode_compound): Likewise. Also propagate not_found_ptr to
2326 (decode_line_1): Propagate not_found_ptr to decode_compound.
2327 (cplusplus_error): Now throws NOT_FOUND_ERROR.
2329 2009-06-25 Karen Osmond <karen.osmond@gmail.com>
2331 * MAINTAINERS (Write After Approval): Add self.
2333 2009-06-23 Ulrich Weigand <uweigand@de.ibm.com>
2335 * valops.c (value_one): Reimplement broken decimal-float case.
2337 2009-06-23 Ulrich Weigand <uweigand@de.ibm.com>
2339 * eval.c (evaluate_subexp_standard): Use expression architecture
2340 instead of current_gdbarch.
2342 * infrun.c (handle_inferior_event): Avoid unncessary reference
2343 to current_gdbarch and get_current_frame ().
2345 2009-06-23 Ulrich Weigand <uweigand@de.ibm.com>
2347 * breakpoint.h (set_longjmp_breakpoint): Add THREAD argument.
2348 (enum bptype): Add bp_longjmp_master.
2350 * breakpoint.c (create_longjmp_master_breakpoint): New function.
2351 (update_breakpoints_after_exec): Handle bp_longjmp_master
2352 breakpoints. Call create_longjmp_master_breakpoint.
2353 (print_it_typical, bpstat_stop_status, bpstat_what,
2354 print_one_breakpoint_location, allocate_bp_location, mention,
2355 delete_command, breakpoint_re_set_one): Handle bp_longjmp_master.
2356 (breakpoint_re_set): Call create_longjmp_master_breakpoint.
2357 (create_longjmp_breakpoint): Delete.
2358 (set_longjmp_breakpoint): Add THREAD argument. Reimplement
2359 to install momentary clones of bp_longjmp_master breakpoints.
2361 * infcmd.c (step_1): Pass thread to set_longjmp_breakpoint.
2363 2009-06-23 Cary Coutant <ccoutant@google.com>
2365 * dwarf2read.c (dwarf_decode_lines): Ignore rows where is_stmt is 0.
2366 Set basic_block to 0 after a special opcode.
2368 2009-06-23 Jan Kratochvil <jan.kratochvil@redhat.com>
2370 Fix a regression by the mmap patch from 2009-06-16.
2371 * symfile.c (reread_symbols): Move sym_finish and clear_objfile_data
2372 calls before deleting the OBJFILE obstack. Extend the comment.
2374 2009-06-23 Ulrich Weigand <uweigand@de.ibm.com>
2376 * jv-lang.h (JAVA_OBJECT_SIZE): Remove.
2377 (get_java_object_header_size): Add GDBARCH parameter.
2378 * jv-lang.c (get_java_object_header_size): Add GDBARCH parameter.
2379 Use it instead of current_gdbarch.
2380 (evaluate_subexp_java): Replace JAVA_OBJECT_SIZE with call to
2381 get_java_object_header_size.
2382 * jv-valprint.c (java_value_print): Likewise.
2384 2009-06-23 Sami Wagiaalla <swagiaal@redhat.com>
2386 * dwarf2read.c (process_die): Handle import statements
2387 (DW_TAG_imported_declaration, case DW_TAG_imported_module)
2388 (read_import_statement): New.
2389 (read_func_scope): Update using_directives to point to current context
2390 (read_lexical_block_scope): Ditto.
2391 * cp-support.h: Added prototype for cp_add_using.
2392 * cp-namespace.c: Removed local context_stack.
2393 (cp_initialize_namespace): Deleted.
2394 (cp_finalize_namespace): Deleted.
2395 (cp_add_using_directive): Use using_directives instead of using_list.
2396 (cp_add_using): No longer static.
2397 * buildsym.h: Created global using_direct variable.
2398 Created using_direct variable in context_stack.
2399 * buildsym.c (finish_block): Set using directives for the block under
2401 (start_symtab): Removed call to cp_initialize_namespace().
2402 (end_symtab): Removed call to cp_finalize_namespace().
2403 (push_context): Save and reset using_directives.
2404 * block.c (block_using): Return using directives for given
2405 block instead of static block.
2407 2009-06-23 Ulrich Weigand <uweigand@de.ibm.com>
2409 * target-descriptions.h (struct type): Do not declare.
2410 (struct tdesc_type): Declare.
2411 (tdesc_named_type): Change return type to struct tdesc_type *.
2412 (tdesc_record_type): Remove.
2413 (tdesc_create_vector): Add prototype.
2414 (tdesc_create_union): Likewise.
2415 (tdesc_add_field): Likewise.
2417 * target-descriptions.c (struct tdesc_reg): Replace gdb_type
2418 member by tdesc_type member.
2419 (struct tdesc_type_field, tdesc_type_field): Add type and vector def.
2420 (struct tdesc_type, tdesc_type_p): Likewise.
2421 (struct tdesc_arch_reg, tdesc_arch_reg): Likewise.
2422 (struct tdesc_feature): Change type of "types" to VEC(tdesc_type_p).
2423 (struct tdesc_arch_data): Replace registers member by arch_regs.
2425 (tdesc_predefined_types): Change to array of pre-defined
2426 struct tdesc_type structures. Add "code_ptr" and "data_ptr".
2427 (tdesc_named_type): Return struct tdesc_type * instead of GDB type.
2428 (tdesc_gdb_type): New function.
2430 (target_find_description): Update for data structure changes.
2431 (tdesc_data_cleanup): Likewise.
2432 (tdesc_numbered_register): Likewise.
2433 (tdesc_use_registers): Likewise.
2434 (tdesc_create_reg): Likewise.
2436 (tdesc_find_arch_register): New function.
2437 (tdesc_find_register): Use it.
2438 (tdesc_register_type): Use tdesc_gdb_type to generate GDB type from
2439 tdesc_type on demand; cache generated types in tdesc_arch_reg.
2441 (tdesc_free_type): New function.
2442 (tdesc_free_feature): Call it.
2444 (tdesc_create_vector): New function.
2445 (tdesc_create_union): Likewise.
2446 (tdesc_add_field): Likewise.
2447 (tdesc_record_type): Remove.
2449 (tdesc_type_id): Remove.
2450 (maint_print_c_tdesc_cmd): Update for data structure changes. Update
2451 generated code to create tdesc_type structures instead of GDB types.
2453 * xml-tdesc.c: Do not include "gdbtypes.h".
2454 (struct tdesc_parsing_data): Change type of current_union to
2455 struct tdesc_type *.
2456 (tdesc_start_reg): Do not special-case "code_ptr" or "data_ptr".
2457 (tdesc_start_union): Call tdesc_create_union.
2458 (tdesc_start_field): Call tdesc_add_field.
2459 (tdesc_start_vector): Call tdesc_create_vector.
2460 (tdesc_end_union): Remove.
2461 (feature_children): Remove reference to tdesc_end_union.
2463 * features/arm-with-iwmmxt.c: Regenerate.
2464 * features/mips-linux.c: Regenerate.
2465 * features/mips64-linux.c: Regenerate.
2466 * features/rs6000/powerpc-32.c: Regenerate.
2467 * features/rs6000/powerpc-32l.c: Regenerate.
2468 * features/rs6000/powerpc-403.c: Regenerate.
2469 * features/rs6000/powerpc-403gc.c: Regenerate.
2470 * features/rs6000/powerpc-505.c: Regenerate.
2471 * features/rs6000/powerpc-601.c: Regenerate.
2472 * features/rs6000/powerpc-602.c: Regenerate.
2473 * features/rs6000/powerpc-603.c: Regenerate.
2474 * features/rs6000/powerpc-604.c: Regenerate.
2475 * features/rs6000/powerpc-64.c: Regenerate.
2476 * features/rs6000/powerpc-64l.c: Regenerate.
2477 * features/rs6000/powerpc-7400.c: Regenerate.
2478 * features/rs6000/powerpc-750.c: Regenerate.
2479 * features/rs6000/powerpc-860.c: Regenerate.
2480 * features/rs6000/powerpc-altivec32.c: Regenerate.
2481 * features/rs6000/powerpc-altivec32l.c: Regenerate.
2482 * features/rs6000/powerpc-altivec64.c: Regenerate.
2483 * features/rs6000/powerpc-altivec64l.c: Regenerate.
2484 * features/rs6000/powerpc-e500.c: Regenerate.
2485 * features/rs6000/powerpc-e500l.c: Regenerate.
2486 * features/rs6000/powerpc-isa205-32l.c: Regenerate.
2487 * features/rs6000/powerpc-isa205-64l.c: Regenerate.
2488 * features/rs6000/powerpc-isa205-altivec32l.c: Regenerate.
2489 * features/rs6000/powerpc-isa205-altivec64l.c: Regenerate.
2490 * features/rs6000/powerpc-isa205-vsx32l.c: Regenerate.
2491 * features/rs6000/powerpc-isa205-vsx64l.c: Regenerate.
2492 * features/rs6000/powerpc-vsx32.c: Regenerate.
2493 * features/rs6000/powerpc-vsx32l.c: Regenerate.
2494 * features/rs6000/powerpc-vsx64.c: Regenerate.
2495 * features/rs6000/powerpc-vsx64l.c: Regenerate.
2496 * features/rs6000/rs6000.c: Regenerate.
2498 2009-06-23 Joel Brobecker <brobecker@adacore.com>
2500 * ada-lang.c (decode_packed_array): If the value is a pointer to
2501 an array, then use value_ind to dereference it, not ada_value_ind.
2502 (ada_template_to_fixed_record_type_1): Handle the case where a
2503 dynamic field is an aligner type.
2504 (to_fixed_array_type): Add handling for packed array types.
2505 (ada_get_base_type): Do not follow the XVS type if the type is
2507 (ada_evaluate_subexp): Split a few statements up for clarity
2509 <OP_FUNCALL>: Add handling of the case of a packed array that
2510 has already been fixed.
2512 2009-06-23 Joel Brobecker <brobecker@adacore.com>
2514 * ada-lang.c (evaluate_subexp): Delete. Use the version from eval.c.
2515 (evaluate_subexp_type): Reimplement using evaluate_subexp.
2516 * value.h (evaluate_subexp): Add declaration.
2517 * eval.c (evaluate_subexp): Make non-static.
2518 * objc-lang.c (print_object_command): Use evaluate_subexp.
2520 2009-06-23 Paul Pluzhnikov <ppluzhnikov@google.com>
2522 Revert 2009-05-14 breakpoint commit (no longer needed).
2523 * breakpoint.h (breakpoint_re_set_objfile): Remove
2524 * breakpoint.c (breakpoint_re_set_objfile): Likewise
2525 (create_overlay_event_breakpoint): Remove objfile parameter,
2526 iterate over all objfiles.
2527 * objfiles.c (objfile_relocate): Update.
2528 * symfile.c (new_symfile_objfile): Likewise.
2530 2009-06-23 Tom Tromey <tromey@redhat.com>
2533 * c-lang.c (classify_type): Iterate over typedefs.
2534 * c-valprint.c (textual_element_type): Iterate over typedefs.
2536 2009-06-22 Tristan Gingold <gingold@adacore.com>
2538 * darwin-nat.c (darwin_xfer_partial): Use host_address_to_string
2541 2009-06-22 Jan Kratochvil <jan.kratochvil@redhat.com>
2544 * buildsym.c (block_compar): New function.
2545 (end_symtab): Replace the bubble sort by a qsort based code.
2547 2009-06-22 Sami Wagiaalla <swagiaal@redhat.com>
2549 * MAINTAINERS (Write After Approval): Add self.
2551 2009-06-22 Ulrich Weigand <uweigand@de.ibm.com>
2553 * spu-tdep.c (spu_get_longjmp_target): New function.
2554 (spu_gdbarch_init): Install it.
2556 2009-06-22 H.J. Lu <hongjiu.lu@intel.com>
2559 * remote.c (getpkt_or_notif_sane_1): Initialize val to -1.
2561 2009-06-21 Michael Snyder <msnyder@vmware.com>
2563 * inferior.h: Update ancient comment.
2565 2009-06-20 Aleksandar Ristovski <aristovski@qnx.com>
2566 Pedro Alves <pedro@codesourcery.com>
2568 * solib-svr4.c (IGNORE_FIRST_LINK_MAP_ENTRY): Avoid dereferencing
2570 (scan_dyntag): Skip if input bfd isn't elf flavoured.
2571 (locate_base): Call elf_locate_base even without an exec_bfd.
2573 2009-06-19 Samuel Bronson <naesten@gmail.com>
2576 * cli/cli-decode.c (apropos_cmd): Skip traversing abbreviations
2577 for prefix commands to avoid duplicates in the output.
2579 2009-06-19 Samuel Bronson <naesten@gmail.com>
2582 * cli/cli-decode.c (apropos_cmd): Fix avoidance of double
2585 2009-06-19 Jerome Guitton <guitton@adacore.com>
2587 * breakpoint.c (expand_line_sal_maybe): When explicit_line,
2588 skip prologue on each sals.
2589 (skip_prologue_sal): Return explicit_line and explicit_pc
2592 2009-06-19 Tristan Gingold <gingold@adacore.com>
2594 * darwin-nat.c (_initialize_darwin_inferior): Remove commented-out
2597 2009-06-19 Tristan Gingold <gingold@adacore.com>
2598 * machoread.c (macho_symtab_read): Adjust for bfd changes.
2599 * darwin-nat.h (struct darwin_exception_msg): New type to describe
2601 (struct private_thread_info): New type to describe the state of the
2603 (DEF_VEC_I thread_t): Removed, replaced by ...
2604 (DEF_VEC_O darwin_thread_t): ... this new type.
2605 (struct darwin_inferior): Renamed to ...
2606 (struct private_inferior): ... this type. Fields added.
2607 (darwin_not_port): Moved into the private inferior structure.
2608 * darwin-nat.c: Add includes, improve comments.
2609 Rewrite to handle multiple threads and processes.
2610 (darwin_resume_to): New function and protype.
2611 (darwin_resume, darwin_wait_to, darwin_wait): Ditto.
2612 (darwin_kill_inferior): Add ops argument.
2613 (darwin_pid_to_str): New function.
2614 (darwin_thread_alive): Ditto.
2615 (darwin_inf, darwin_not_port): Removed.
2616 (darwin_inf_fake_stop): New variable.
2617 (msgin, msgout, msg_state, exc_msg): Removed.
2618 (mach_check_error): Use warning instead of error.
2619 (darwin_ptrace): Adjust debug level.
2620 (cmp_thread_t): Fix names (typo).
2621 (darwin_check_new_threads): Argument is now an inferior,
2622 adjust for new structures, add no change check, ignore dead ports,
2623 handle first thread case.
2624 (find_inferior_task_it): New function.
2625 (find_inferior_notify_it): Ditto.
2626 (darwin_find_inferior_by_task): Ditto.
2627 (darwin_find_inferior_by_notify): Ditto.
2628 (darwin_find_thread): Ditto.
2629 (darwin_suspend_inferior): Ditto.
2630 (darwin_resume_inferior): Ditto.
2631 (catch_exception_raise_state): Removed.
2632 (catch_exception_raise_state_identity): Removed.
2633 (darwin_suspend_inferior_it): New function.
2634 (darwin_resume_inferior_it): Ditto.
2635 (darwin_dump_message): New function, extracted from darwin_wait.
2636 (darwin_decode_exception_message): New function.
2637 (darwin_encode_reply): New function.
2638 (catch_exception_raise): Removed.
2639 (darwin_send_reply): New function, extracted from darwin_resume.
2640 (darwin_resume_thread): New function, extracted from darwin_resume.
2641 (struct resume_inferior_threads_param): New type.
2642 (darwin_resume_inferior_threads_it): New function.
2643 (darwin_resume_inferior_threads): New function.
2644 (darwin_suspend_inferior_threads): New function.
2645 (darwin_resume): Mostly rewritten to handle multiple threads and
2647 (darwin_decode_message): New function extracted from darwin_wait.
2648 (cancel_breakpoint): New function.
2649 (darwin_wait): Mostly rewritten. Handle multiple threads.
2650 (darwin_mourn_inferior): Adjust for per process structures.
2651 (darwin_reply_to_all_pending_messages): New function.
2652 (darwin_stop_inferior): Adjust for per inferior structures.
2653 (darwin_attach_pid): Ditto.
2654 (darwin_init_thread_list): Ditto.
2655 (darwin_attach): Ditto.
2656 (darwin_detach): Ditto.
2657 (darwin_files_info): Now empty.
2658 (darwin_pid_to_str): Adjust returns string to match one expected by
2660 (darwin_read_write_inferior): Rename err variable to match other uses.
2661 Adjust debug message. Handle submaps.
2662 (darwin_xfer_memory): Adjust for per inferior structures.
2663 (set_enable_mach_exceptions): Ditto.
2664 (darwin_pid_to_exec_file): New function.
2665 (darwin_get_ada_task_ptid): Ditto.
2666 (darwin_supports_multi_process): Ditto.
2667 (_initialize_darwin_inferior): Remove useless assertion, adjust for
2668 per inferior structures. Add new target operations.
2670 2009-06-18 Hui Zhu <teawater@gmail.com>
2671 Michael Snyder <msnyder@vmware.com>
2673 * infrun.c (handle_inferior_event): Improve reverse stepping
2674 through function epilogue.
2676 * infrun.c (handle_inferior_event): Reverse-next through
2679 2009-06-18 Paul Pluzhnikov <ppluzhnikov@google.com>
2681 * dwarf2-frame.c (struct comp_unit): Use bfd_size_type for
2684 2009-06-17 Tom Tromey <tromey@redhat.com>
2686 * dwarf2read.c (zlib_decompress_section): Use a cleanup.
2688 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
2690 * gdbarch.sh (pointer_to_address): Change to type 'm'.
2691 (address_to_pointer): Likewise.
2692 * gdbarch.c, gdbarch.h: Regenerate.
2694 * inferior.h (unsigned_pointer_to_address): Add GDBARCH argument.
2695 (signed_pointer_to_address): Likewise.
2696 (unsigned_address_to_pointer, address_to_signed_pointer): Likewise.
2697 * findvar.c (unsigned_pointer_to_address): Likewise.
2698 (signed_pointer_to_address): Likewise.
2699 (unsigned_address_to_pointer, address_to_signed_pointer): Likewise.
2701 * avr-tdep.c (avr_address_to_pointer): Likewise.
2702 (avr_pointer_to_address): Likewise.
2703 * iq2000-tdep.c (iq2000_pointer_to_address): Likewise.
2704 (iq2000_address_to_pointer): Likewise.
2705 * m32c-tdep.c (m32c_m16c_address_to_pointer): Likewise.
2706 (m32c_m16c_pointer_to_address): Likewise.
2707 * spu-tdep.c (spu_pointer_to_address): Likewise.
2708 * xstormy16-tdep.c (xstormy16_pointer_to_address): Likewise.
2709 (xstormy16_address_to_pointer): Likewise.
2711 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
2713 * printcmd.c (print_scalar_formatted): Always truncate
2714 unsigned data types.
2716 * cli-dump.c (struct callback_data): Change type of load_offset
2718 (restore_binary_file): Update type casts.
2719 (restore_command): Parse load_offset as address, not long.
2721 * utils.c (string_to_core_addr): Do not sign-extend value.
2722 * varobj.c (find_frame_addr_in_frame_chain): Truncate frame_base
2723 before comparing against requested frame address.
2725 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
2727 * gdbarch.sh (gcore_bfd_target): New gdbarch callback.
2728 * gdbarch.h, gdbarch.c: Regenerate.
2730 * gcore.c (default_gcore_target): Make return value const.
2731 Call gdbarch_gcore_bfd_target if present.
2732 (default_gcore_arch, default_gcore_mach): Use target_gdbarch.
2734 * corelow.c (core_read_description): Call gdbarch_core_read_description
2735 on core_gdbarch instead of current_gdbarch.
2737 * ppc-linux-tdep.c (ppc_linux_init_abi): Install gcore_bfd_target.
2739 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
2741 * gdbtypes.c (create_string_type): Receive character type as argument.
2742 * gdbtypes.h (create_string_type): Add character type argument.
2743 * dwarf2read.c (read_tag_string_type): Pass character type to
2746 * value.h (value_string): Add character type argument.
2747 * valops.c (value_string): Add character type argument. Pass it to
2748 create_string_type. Do not allocate space in inferior.
2749 * valarith.c (value_concat): Pass character type to value_string.
2751 * value.h (value_typed_string): Rename to ...
2752 (value_cstring): ... this.
2753 * valops.c (value_typed_string): Rename to ...
2754 (value_cstring): ... this.
2755 * c-lang.c (evaluate_subexp_c): Update.
2757 * python/python-value.c (builtin_type_pychar): New define.
2758 (convert_value_from_python): Call value_cstring instead
2759 of value_from_string.
2760 * value.c (value_from_string): Remove.
2761 * value.h (value_from_string): Remove.
2763 * eval.c (evaluate_subexp_standard): Pass character type to
2764 value_string. Pass expression architecture to value_nsstring
2765 and lookup_child_selector.
2766 * objc-lang.h (lookup_objc_class): Add GDBARCH parameter.
2767 (lookup_child_selector): Likewise.
2768 (value_nsstring): Likewise.
2769 * objc-lang.c (lookup_objc_class): Add GDBARCH parameter.
2770 Pass character type to value_string..
2771 (lookup_child_selector): Likewise.
2772 (value_nsstring): Add GDBARCH parameter, use it instead of
2773 objfile architecture. Pass architecture to lookup_objc_class
2774 and lookup_child_selector. Pass character type to value_string.
2775 (end_msglist): Pass architecture to lookup_objc_class.
2776 * objc-exp.y: Pass architecture to lookup_objc_class.
2778 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
2780 * gdbtypes.h (struct language_defn): Add forward declaration.
2781 (lookup_typename): Add LANGUAGE and GDBARCH parameters.
2782 (lookup_unsigned_typename): Likewise.
2783 (lookup_signed_typename): Likewise.
2784 * gdbtypes.c (lookup_typename): Add LANGUAGE and GDBARCH parameters.
2785 Use them instead of current_language and current_gdbarch.
2786 (lookup_unsigned_typename): Add LANGUAGE and GDBARCH parameters.
2787 Pass them to lookup_typename.
2788 (lookup_signed_typename): Likewise.
2790 * c-exp.y: Pass parse_language and parse_gdbarch to
2791 lookup_unsigned_typename and lookup_signed_typename.
2792 * objc-exp.y: Likewise.
2793 * m2-exp.y: Pass parse_language and parse_gdbarch to lookup_typename.
2795 * c-lang.c (evaluate_subexp_c): Pass expression language and
2796 gdbarch to lookup_typename.
2797 * printcmd.c (printf_command): Pass current language and
2798 gdbarch to lookup_typename.
2799 * python/python-type.c (typy_lookup_typename): Likewise.
2800 Include "language.h".
2802 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
2804 * sparc64-nat.c (sparc64_gregset_supplies_p): Add GDBARCH parameter.
2805 Use it instead of current_gdbarch. Pass architecture to
2806 sparc32_gregset_supplies_p.
2807 (sparc64_fpregset_supplies_p): Add GDBARCH parameter. Use it instead
2808 of current_gdbarch. Pass architecture to sparc32_fpregset_supplies_p.
2809 * sparc64nbsd-nat.c (sparc64nbsd_gregset_supplies_p,
2810 sparc64nbsd_fpregset_supplies_p): Likewise.
2811 * sparc-nat.c (sparc_gregset_supplies_p, sparc_fpregset_supplies_p):
2812 Add GDBARCH parameter.
2813 (sparc32_gregset_supplies_p, sparc32_fpregset_supplies_p): Likewise.
2814 (sparc_fetch_inferior_registers): Pass regcache architecture to
2815 sparc_gregset_supplies_p and sparc_fpregset_supplies_p.
2816 (sparc_store_inferior_registers): Likewise.
2817 * sparc-nat.h (sparc_gregset_supplies_p, sparc_fpregset_supplies_p:
2818 Add GDBARCH parameter.
2819 (sparc32_gregset_supplies_p, sparc32_fpregset_supplies_p): Likewise.
2821 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
2823 * ada-tasks.c (read_known_tasks_array): Use target_gdbarch instead
2825 * aix-thread.c (pd_enable): Likewise.
2826 * amd64-linux-nat.c (ps_get_thread_area): Likewise.
2827 * bsd-uthread.c (bsd_uthread_activate): Likewise.
2828 * linux-nat.c (linux_nat_info_proc_cmd): Likewise.
2829 * linux-thread-db.c (enable_thread_event): Likewise.
2830 * monitor.c (monitor_write_memory, monitor_read_memory): Likewise.
2831 * nto-procfs.c (procfs_open): Likewise.
2832 * procfs.c (invalidate_cache, procfs_insert_watchpoint,
2833 info_proc_mappings, info_mappings_callback): Likewise.
2834 * record.c (record_open): Likewise.
2835 * rs6000-nat.c (ARCH64): Likewise.
2836 * solib-darwin.c (darwin_solib_create_inferior_hook): Likewise.
2837 (darwin_bfd_open): Likewise.
2838 * memattr.c (mem_info_command): Likewise.
2840 * windows-nat.c (win32_resume): Use current regcache architecture
2841 instead of current_gdbarch.
2843 * dbug-rom.c (dbug_regname): Remove check against number of
2844 registers in current_gdbarch.
2845 * solib-pa64.c (read_dynamic_info): Remove unused variable.
2847 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
2849 * dummy-frame.c (deprecated_pc_in_call_dummy): Add GDBARCH parameter,
2850 use it instead of current_gdbarch.
2851 * frame.h (deprecated_pc_in_call_dummy): Add GDBARCH parameter.
2852 * arm-tdep.c (arm_skip_prologue): Pass architecture to
2853 deprecated_pc_in_call_dummy.
2855 * symtab.c (skip_prologue_using_sal): Add GDBARCH parameter.
2856 Use it instead of current_gdbarch.
2857 * symtab.h (skip_prologue_using_sal): Add GDBARCH parameter.
2858 * breakpoint.c (expand_line_sal_maybe): Pass architecture to
2859 skip_prologue_using_sal.
2860 * arm-tdep.c (skip_prologue_using_sal): Likewise.
2861 * lm32-tdep.c (lm32_skip_prologue): Likewise.
2862 * m32-tdep.c (m32c_skip_prologue): Likewise.
2863 * mips-tdep.c (mips_skip_prologue): Likewise.
2864 * moxie-tdep.c (moxie_skip_prologue): Likewise.
2865 * mt-tdep.c (mt_frame_unwind_cache): Likewise.
2866 * rs6000-tdep.c (rs6000_skip_prologue): Likewise.
2867 * frv-tdep.c (frv_analyze_prologue): Add GDBARCH parameter, pass
2868 it to skip_prologue_using_sal. Update call sites ...
2869 (frv_skip_prologue, frv_frame_unwind_cache): ... here.
2871 * mn10300-tdep.c (struct mn10300_prologue): Add GDBARCH member.
2872 (check_for_saved): Use it instead of current_gdbarch.
2873 (mn10300_analyze_prologue): Set it.
2875 * value.c (using_struct_return): Add GDBARCH parameter. Use it
2876 instead of current_gdbarch.
2877 * value.h (using_struct_return): Add GDBARCH parameter.
2878 * eval.c (evaluate_subexp_standard): Pass architecture to
2879 using_struct_return.
2880 * infcall.c (call_function_by_hand): Likewise.
2881 * stack.c (return_command): Likewise.
2882 * sparc-tdep.c (sparc32_push_dummy_code): Likewise.
2884 * symtab.c (in_prologue): Add GDBARCH parameter. Use it instead of
2886 * symtab.h (in_prologue): Add GDBARCH parameter.
2887 * infrun.c (handle_inferior_event): Pass architecture to in_prologue.
2889 * eval.c (evaluate_subexp_standard): Use expression architecture
2890 instead of current_gdbarch.
2892 * c-lang.c (evaluate_subexp_c): Use expression architecture and
2893 language instead of current_gdbarch and current_language.
2895 * printcmd.c (do_one_display): Use expression architecture instead
2898 * infcmd.c (print_return_value): Use architecture of stop_regcache
2899 instead of current_gdbarch.
2900 (print_vector_info, print_float_info): Remove GDBARCH argument,
2901 use frame architecture instead.
2902 (vector_info, float_info): Update calls.
2904 * objc-lang.c (objc_skip_trampoline): Use frame architecture
2905 instead of current_gdbarch.
2907 * parse.c (write_dollar_variable): Use parse architecture instead
2910 * source.c (line_info): Use objfile architecture instead of
2913 * symtab.c (find_function_start_sal): Use gdbarch instead of
2915 (print_msymbol_info): Use objfile architecture instead of
2918 * valops.c (value_assign): Use frame architecture instead of
2921 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
2923 * buildsym.c (record_line): Remove call to gdbarch_addr_bits_remove.
2925 * coffread.c (coff_symtab_read): Call gdbarch_addr_bits_remove before
2926 calling record_line.
2927 (enter_linenos): Likewise.
2928 * dbxread.c (process_one_symbol): Likewise.
2929 * dwarf2read.c (dwarf_decode_lines): Likewise.
2930 * mdebugread.c (psymtab_to_symtab_1): Likewise.
2931 * xcoffread.c (enter_line_range): Likewise.
2933 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
2935 * ax-gdb.c (gen_bitfield_ref): Add EXP argument, use expression
2936 architecture instead of current_gdbarch.
2937 (gen_struct_ref): Add EXP argument, pass to get_bitfield_ref.
2938 (gen_expr): Pass expression to get_struct_ref.
2940 * symtab.h (struct symbol_ops): Add GDBARCH parameter to
2941 tracepoint_var_ref callback.
2942 * ax-gdb.c (gen_var_ref): Pass architecture to tracepoint_var_ref
2943 symbol operation callback.
2944 * dwarf2loc.c (dwarf2_tracepoint_var_ref): Add GDBARCH parameter.
2945 Use it instead of current_gdbarch.
2946 (locexpr_tracepoint_var_ref): Add GDBARCH parameter. Pass it to
2947 dwarf2_tracepoint_var_ref.
2948 (loclist_tracepoint_var_ref): Likewise.
2950 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
2952 * prologue-value.c (make_pv_area): Add ADDR_BIT argument.
2953 Use it instead of address bits of current_gdbarch.
2954 * prologue-value.c (make_pv_area): Add ADDR_BIT argument.
2955 * arm-tdep.c (thumb_analyze_prologue): Pass address bits to
2957 (arm_scan_prologue): Likewise.
2958 * m32c-tdep.c (m32c_analyze_prologue): Likewise.
2959 * mep-tdep.c (mep_analyze_prologue): Likewise.
2960 * mn10300-tdep.c (mn10300_analyze_prologue): Likewise.
2961 * s390-tdep.c (s390_analyze_prologue): Likewise.
2963 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
2965 * mi/mi-main.c (mi_cmd_data_list_register_names): Use selected
2966 frame architecture instead of current_gdbarch.
2967 (mi_cmd_data_list_changed_registers): Likewise.
2968 (mi_cmd_data_list_register_values): Likewise. Pass selected
2969 frame to get_register.
2970 (get_register): Add FRAME argument, use it as frame to retrieve
2971 registers from (instead of selected frame). Use frame architecture
2972 instead of current_gdbarch.
2973 (mi_cmd_data_write_register_values): Use current regcache
2974 architecture instead of current_gdbarch.
2976 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
2978 * tui/tui-regs.c (tui_show_register_group): Remove GDBARCH parameter;
2979 use frame architecture instead. Replace current_gdbarch uses.
2980 (tui_show_registers): Update call.
2981 (tui_get_register): Remove GDBARCH parameter; use frame architecture
2983 (tui_show_register_group): Update call.
2984 (tui_check_register_values): Likewise.
2985 (tui_register_format): Remove GDBARCH parameter; use frame
2986 architecture instead. Replace current_gdbarch uses.
2987 (tui_get_register): Update call.
2989 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
2991 * gdbarch.sh (construct_inferior_arguments): Remove.
2992 * gdbarch.c, gdbarch.h: Regenerate.
2993 * infcmd.c (get_inferior_args): Call construct_inferior_arguments
2994 directly instead of gdbarch_construct_inferior_arguments.
2995 (construct_inferior_arguments): Remove GDBARCH argument.
2996 * inferior.h (construct_inferior_arguments): Likewise.
2998 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
3000 * symfile.c (section_is_mapped): Use objfile architecture instead
3002 (TARGET_LONG_BYTES): Remove.
3003 (read_target_long_array): Add SIZE argument. Use it instead of
3005 (simple_read_overlay_table): Retrieve long size from objfile
3006 architecture; pass it to read_target_long_array.
3007 (simple_read_overlay_region_table): Likewise.
3008 (simple_overlay_update_1): Likewise.
3010 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
3012 * infrun.c (cleanup_displaced_step_closure): Remove.
3013 (displaced_step_clear_cleanup): Move to before displaced_step_prepare.
3014 (displaced_step_prepare): Use displaced_step_clear_cleanup instead
3015 of cleanup_displaced_step_closure.
3016 (handle_inferior_event, keep_going): Use thread architecture instead
3019 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
3021 * infrun.c (handle_inferior_event): Use current frame architecture
3022 or thread architecture instead of current_gdbarch. Pass to
3023 handle_step_into_function and handle_step_into_function_backward.
3024 (handle_step_into_function): Add GDBARCH parameter. Use it instead
3026 (handle_step_into_function_backward): Likewise.
3027 (insert_step_resume_breakpoint_at_frame): Use frame architecture
3028 instead of current_gdbarch.
3029 (insert_step_resume_breakpoint_at_caller): Likewise.
3031 2009-06-17 Pierre Muller <muller@ics.u-strasbg.fr>
3032 Pedro Alves <pedro@codesourcery.com>
3034 * infcmd.c (post_create_inferior): Call breakpoint_re_set after target
3035 is pushed for watchpoint promotion to hardware watchpoint.
3037 2009-06-16 Paul Pluzhnikov <ppluzhnikov@google.com>
3039 * dwarf2read.c (dwarf_info_section, dwarf_abbrev_section)
3040 (dwarf_line_section, dwarf_pubnames_section, dwarf_aranges_section)
3041 (dwarf_loc_section, dwarf_macinfo_section, dwarf_str_section)
3042 (dwarf_ranges_section, dwarf_frame_section)
3043 (dwarf_eh_frame_section): Removed.
3044 (dwarf2_resize_section): Likewise.
3045 (dwarf2_read_section): Now static, use bfd_mmap() if possible.
3046 (dwarf2_get_section_info): New function.
3047 (munmap_section_buffer): Likewise.
3048 (dwarf2_per_objfile_cleanup): Likewise.
3049 (section_is_p): Signature change.
3050 * dwarf2-frame.c (dwarf2_build_frame_info): Use
3051 dwarf2_get_section_info instead of dwarf2_read_section.
3053 2009-06-16 Paul Pluzhnikov <ppluzhnikov@google.com>
3055 * solib.c (symbol_add_stub): New FLAGS parameter.
3056 (solib_read_symbols): FROM_TTY -> FLAGS, call symbol_add_stub
3058 (solib_add): Defer breakpoint_re_set until after all solibs.
3059 * bsd-uthread.c (bsd_uthread_solib_loaded): Adjust.
3060 * rs6000-nat.c (objfile_symbol_add): Adjust.
3061 * symfile.c (syms_from_objfile): Merge parameters into ADD_FLAGS.
3062 (new_symfile_objfile): Likewise.
3063 (symbol_file_add_with_addrs_or_offsets): Likewise.
3064 (symbol_file_add_from_bfd): Likewise.
3065 (symbol_file_add): Likewise.
3066 * symfile.h (enum symfile_add_flags): New. Adjust prototypes.
3067 * symfile-mem.c (symbol_file_add_from_memory): Adjust.
3068 * windows-nat.c (safe_symbol_file_add_stub): Adjust.
3069 * machoread.c (macho_oso_symfile, macho_symfile_read): Adjust.
3071 2009-06-16 Keith Seitz <keiths@redhat.com>
3073 * linespec.c (collect_methods): Delete.
3074 (add_matching_methods): Reove destructor special case.
3075 (find_method): Call find_methods directly instead of
3077 * valops.c (value_struct_elt): Remove destructor
3079 (check_field): Likewise.
3080 (value_struct_elt_for_reference): Likewise.
3081 (destructor_name_p): Remove misleading comment about dtors
3082 being "special cases".
3083 * gdbtypes.h (get_destructor_fn_field): Remove. No longer needed.
3084 * gdbtypes.c (get_destructor_fn_field): Likewise.
3086 2009-06-16 Pedro Alves <pedro@codesourcery.com>
3088 * mi/mi-main.c (mi_cmd_data_read_memory): Dispatch
3089 TARGET_OJECT_MEMORY reads to the topmost target, not to the
3090 flattened current_target.
3092 2009-06-16 Tristan Gingold <gingold@adacore.com>
3094 * avr-tdep.c (struct gdbarch_tdep): Replace the unused field with
3096 (avr_register_name): Add const to register_names.
3097 (avr_scan_arg_moves): Move inside avr_scan_prologue.
3098 (avr_scan_prologue): Add pc_end argument.
3099 Only read prologue bytes that can be read.
3100 Limit the scan to the known prologue length.
3101 Makes pattern variables static and const.
3103 (avr_skip_prologue): Pass func_end argument to avr_scan_prologue.
3105 (avr_breakpoint_from_pc): Constify avr_break_insn.
3106 (avr_extract_return_value): Fix function comment.
3107 (avr_frame_unwind_cache): Fix GNU style violations.
3108 Pass current_pc argument to avr_scan_prologue to stop prologue
3109 analysis to the current pc. This fixes the bug with the 'next'
3111 Correctly set the SP register of the previous frame (use call_length).
3112 (avr_frame_prev_register): Fix indentation.
3113 Correctly read PC from the stack on avr6 architectures.
3114 (avr_push_dummy_call): Fix indentation.
3115 (avr_gdbarch_init): Set call_length according to the architecture.
3117 2009-06-15 Phil Muldoon <pmuldoon@redhat.com>
3119 * infcall.c (show_unwind_on_terminating_exception_p): New
3121 (call_function_by_hand): Create breakpoint and clean-up call for
3122 std::terminate.breakpoint. Add unwind_on_terminating_exception_p
3123 gate. Pop frame on breakpoint hit.
3124 (_initialize_infcall): Add add_setshow_boolean_cmd for
3125 unwind-on-terminating-exception.
3127 2009-06-12 Kevin Buettner <kevinb@redhat.com>
3129 * dwarf2read.c (dwarf2_psymtab_to_symtab): Propagate
3130 `has_section_at_zero' flag from stripped objfile to separate,
3131 debug info only, objfile.
3133 2009-06-12 Pedro Alves <pedro@codesourcery.com>
3135 * exec.h (section_table_xfer_memory_partial): Improve description,
3136 mention SECTION_NAME.
3137 * exec.c (section_table_xfer_memory_partial): Remove stale
3140 2009-06-11 Aleksandar Ristovski <aristovski@qnx.com>
3142 * nto-tdep.h (nto_generic_supply_gpregset)
3143 (nto_generic_supply_fpregset, nto_generic_supply_altregset): Remove.
3144 * nto-tdep.c (nto_generic_supply_gpregset)
3145 (nto_generic_supply_fpregset, nto_generic_supply_altregset): Remove.
3147 2009-06-11 Aleksandar Ristovski <aristovski@qnx.com>
3149 * i386-nto-tdep.c (I386_NTO_SIGCONTEXT_OFFSET): Remove define.
3150 (i386nto_sigcontext_addr): Change the way context address is calculated.
3151 (i386nto_init_abi): Remove usage of deprecated sc_reg_offset and
3152 sc_sp_offset and set sc_reg_offset and sc_num_regs.
3154 2009-06-11 Aleksandar Ristovski <aristovski@qnx.com>
3156 * i386-nto-tdep.c (i386_nto_target): Remove definition.
3157 (init_i386nto_ops): Use macros to set fields to global
3158 current_nto_target directly.
3159 (i386nto_init_abi): Remove unused nto_set_target call.
3160 * nto-tdep.h (nto_set_target): Remove unused declaration.
3161 * nto-tdep.c (nto_set_target): Remove unused function.
3163 2009-06-11 Pedro Alves <pedro@codesourcery.com>
3165 * breakpoint.c (break_command_really): Rename local variable
3166 breakpoint_chain to bkpt_chain.
3168 2009-06-11 Aleksandar Ristovski <aristovski@qnx.com>
3170 Add support for XMM registers.
3171 * i386-nto-tdep.c (i386nto_regset_id): Add case for SSE register set.
3172 (i386nto_register_area): Correctly calculate offsets and sizes for
3173 all supported registers.
3175 2009-06-11 Tom Tromey <tromey@redhat.com>
3177 * eval.c (evaluate_subexp_standard) <OP_OBJC_MSGCALL>: Remove
3178 'static' from local variable definitions.
3180 2009-06-11 Pedro Alves <pedro@codesourcery.com>
3182 * symtab.c (append_expanded_sal): Remove unused local variables.
3184 2009-06-11 Pedro Alves <pedro@codesourcery.com>
3186 * infrun.c (sched_multi): New global.
3187 (resume): If sched_multi is set, resume only threads of the
3189 (prepare_to_proceed): Don't switch over to wait_ptid if we're
3190 resuming a different inferior, and sched_multi is off.
3191 (show_schedule_multiple): New.
3192 (_initialize_infrun): Register new "set schedule-multiple" command.
3193 * inferior.h (sched_multi): Declare.
3194 * NEWS: Mention new "schedule-multiple" setting.
3196 2009-06-11 Pedro Alves <pedro@codesourcery.com>
3198 * varobj.c (varobj_create): Properly restore the selected frame.
3200 2009-06-05 Tom Tromey <tromey@redhat.com>
3202 * inferior.c (print_inferior): Make a table, not a list. Emit
3205 2009-06-10 Jonas Maebe <jonas.maebe@elis.ugent.be>
3207 * darwin-nat.c (darwin_stop_inferior): Pass 0 as options to
3208 darwin_wait (blocking wait).
3209 (darwin_kill_inferior): Likewise.
3211 2009-06-10 Pedro Alves <pedro@codesourcery.com>
3213 * infrun.c (handle_inferior_event): Update comment around trying
3214 to revert back to a stepping thread that has exited.
3216 2009-06-10 Cary Coutant <ccoutant@google.com>
3218 * dwarf2read.c (dwarf_decode_lines): Recognize and ignore
3219 DW_LNE_set_discriminator.
3221 2009-06-10 Pierre Muller <muller@ics.u-strasbg.fr>
3223 * breakpoint.c: ARI fixes.
3224 (create_overlay_event_breakpoint): Avoid assignment inside if statement.
3225 (print_one_breakpoint_location): Likewise.
3226 (create_longjmp_breakpoint): Likewise.
3227 (tracepoint_save_command): Likewise
3228 (bpstat_find_step_resume_breakpoint): No operator at end of line.
3229 (bpstat_stop_status): Likewise.
3230 (describe_other_breakpoints): Likewise.
3231 (hw_watchpoint_used_count): Likewise.
3232 (expand_line_sal_maybe): Likewise.
3233 (break_command_really): Likewise.
3234 (delete_command): Likewise.
3235 (do_enable_breakpoint): Likewise.
3236 (delete_trace_command): Likewise.
3237 (catch_exception_command_1): Likewise and remove extra parentheses.
3239 2009-06-08 Pierre Muller <muller@ics.u-strasbg.fr>
3241 * breakpoint.c (_initialize_breakpoint): Remove "bu" command alias of
3242 "ubreak" command that does not exist.
3244 2009-06-08 Pierre Muller <muller@ics.u-strasbg.fr>
3246 * cli/cli-decode.c (add_alias_cmd): Correct assertion.
3248 2009-06-07 Pedro Alves <pedro@codesourcery.com>
3250 * hppa-tdep.c (_initialize_hppa_tdep): Add declaration.
3252 2009-06-07 Pedro Alves <pedro@codesourcery.com>
3255 * proc-utils.h (procfs_first_available): Don't declare here.
3256 * sol-thread.c: Include procfs.h instead of sys/procfs.h and
3258 * procfs.c: Include procfs.h.
3259 (procfs_target): Make it public. Don't register
3260 procfs_can_use_hw_breakpoint here.
3261 (proc_set_watchpoint): Check for PCWATCH or PIOCSWATCH being
3262 defined instead of TARGET_HAS_HARDWARE_WATCHPOINTS.
3263 (procfs_can_use_hw_breakpoint): Remove check of
3264 TARGET_HAS_HARDWARE_WATCHPOINTS.
3265 (procfs_use_watchpoints): Register procfs_can_use_hw_breakpoint
3267 (_initialize_procfs): Don't add the procfs target here.
3269 * i386-sol2-nat.c: Include target.h and procfs.h.
3270 (_initialize_amd64_sol2_nat): Install the procfs target here,
3271 customized with watchpoints support.
3272 * irix5-nat.c: Include target.h.
3273 (_initialize_core_irix5): Rename to ...
3274 (_initialize_irix5_nat): ... this. Install the procfs target
3275 here, customized with watchpoints support.
3276 * alpha-nat.c: Include procfs.h.
3277 (_initialize_core_alpha): Rename to...
3278 (_initialize_alpha_nat): ... this. Install the procfs target
3279 here, customized with watchpoints support.
3280 * sparc-sol2-nat.c: Include target.h and procfs.h.
3281 (_initialize_sparc_sol2_nat): New.
3283 * config/i386/nm-i386sol2.h (TARGET_HAS_HARDWARE_WATCHPOINTS): Delete.
3284 * config/sparc/nm-sol2.h (TARGET_HAS_HARDWARE_WATCHPOINTS): Delete.
3285 * config/mips/irix5.mh (NAT_FILE): Delete.
3286 * config/mips/irix6.mh (NAT_FILE): Delete.
3287 * config/mips/nm-irix5.h: Delete.
3289 20009-06-07 Pedro Alves <pedro@codesourcery.com>
3291 * auxv.c (procfs_xfer_auxv): Change type of the `object' argument
3292 to enum target_object. Cleanup comments.
3293 * auxv.h: Include "target.h". Cleanup comments to not mention
3294 NATIVE_XFER_AUXV anymore.
3296 2009-06-07 Pedro Alves <pedro@codesourcery.com>
3298 * inferior.h (procfs_first_available): Move declaration to...
3299 * proc-utils.h: ... here.
3300 * sol-thread.c: Include procfs.h and proc-utils.h.
3302 2009-06-07 Pedro Alves <pedro@codesourcery.com>
3304 * inferior.h (proc_iterate_over_mappings): Delete declaration.
3305 * nto-tdep.h (proc_iterate_over_mappings): Delete declaration.
3306 * procfs.c (proc_iterate_over_mappings): Delete.
3308 2009-06-07 Pedro Alves <pedro@codesourcery.com>
3310 * target.h (struct target_ops): Make to_has_all_memory,
3311 to_has_memory, to_has_stack, to_has_registers and to_has_execution
3312 methods instead of variables.
3313 (target_has_all_memory_1, target_has_memory_1, target_has_stack_1)
3314 (target_has_registers_1, target_has_execution_1): Declare
3316 (target_has_all_memory): Rewrite to call target_has_all_memory_1.
3317 (target_has_memory): Rewrite to call target_has_memory_1.
3318 (target_has_stack): Rewrite to call target_has_all_stack_1.
3319 (target_has_registers): Rewrite to call target_has_registers_1.
3320 (target_has_execution): Rewrite to call target_has_execution_1.
3321 (default_child_has_all_memory, default_child_has_memory)
3322 (default_child_has_stack, default_child_has_registers)
3323 (default_child_has_execution): Declare.
3324 (target_mark_running, target_mark_exited): Delete declarations.
3325 * target.c (default_child_has_all_memory,
3326 default_child_has_memory, default_child_has_stack,
3327 default_child_has_registers, default_child_has_execution): New.
3328 (target_has_all_memory_1, target_has_memory_1, target_has_stack_1,
3329 target_has_registers_1, target_has_execution_1): New.
3330 (add_target): Default the to_has_all_memory, to_has_all_memory,
3331 to_has_memory, to_has_stack, to_has_registers and to_has_execution
3332 callbacks to return 0.
3333 (update_current_target): Do not inherit to_has_all_memory,
3334 to_has_memory, to_has_stack, to_has_registers or to_has_execution.
3335 (target_mark_running, target_mark_exited): Delete.
3336 (memory_xfer_partial): Adjust.
3337 (target_read_memory, target_write_memory, target_search_memory):
3338 Dispatch to the the top-most target, not the flattened
3340 (target_info): Adjust.
3341 (init_dummy_target): Install return_zero as callback for
3342 to_has_all_memory, to_has_memory, to_has_stack, to_has_registers,
3344 (set_maintenance_target_async_permitted): Use have_live_inferiors
3345 instead of target_has_execution.
3346 * target-memory.c (target_write_memory_blocks): Dispatch memory
3347 writes to the the top-most target, not the flattened
3350 * breakpoint.c (insert_breakpoints): Don't check for
3351 target_has_execution here.
3352 (update_global_location_list): Check if there are live inferiors
3353 to debug instead of target_has_execution.
3354 * infcmd.c (kill_command, detach_command): Check if there are
3355 inferiors instead of target_has_execution.
3356 * inferior.h (have_live_inferiors): Declare.
3357 * inferior.c (have_live_inferiors): New.
3358 * infrun.c (normal_stop): Don't check for target_has_execution to
3359 finish the thread states.
3360 * thread.c (is_thread_state, is_stopped, is_exited, is_running)
3361 (any_running, is_executing): Remove checks for
3362 target_has_execution.
3363 * top.c (kill_or_detach): Don't try to kill core inferiors.
3364 (quit_target): Don't check for target_has_execution.
3366 * corelow.c (core_has_memory, core_has_stack, core_has_registers):
3368 (init_core_ops): Install core_has_memory, core_has_stack and
3370 * exec.c (exec_has_memory): New.
3371 (init_exec_ops): Install exec_has_memory.
3372 * remote.c (remote_add_inferior): Don't call target_mark_running.
3373 (remote_start_remote): Don't call target_mark_exited or call
3374 target_mark_running.
3375 (remote_open_1): Use have_inferiors instead of
3376 target_has_execution. Don't use target_mark_exited.
3377 (init_remote_ops): Install deafult_child_has_all_memory,
3378 default_child_has_memory, default_child_has_stack,
3379 default_child_has_registers, default_child_has_execution.
3380 * bsd-kvm.c (bsd_kvm_return_one): New.
3381 (bsd_kvm_add_target): Register bsd_kvm_return_one as
3382 to_has_memory, to_has_stack and to_has_registers callbacks.
3383 * remote-m32r-sdi.c (m32r_return_one): New.
3384 (init_m32r_ops): Register it.
3385 * inf-child.c (inf_child_target): Adjust to register
3386 default_child_has_all_memory, default_child_has_memory,
3387 default_child_has_stack, default_child_has_registers,
3388 default_child_has_execution callbacks.
3389 * gnu-nat.c (init_gnu_ops): Likewise.
3390 * go32-nat.c (init_go32_ops): Likewise.
3391 * hpux-thread.c (init_hpux_thread_ops): Likewise.
3392 * monitor.c (init_base_monitor_ops): Likewise.
3393 * nto-procfs.c (init_procfs_ops): Likewise.
3394 * remote-mips.c (_initialize_remote_mips): Likewise.
3395 * windows-nat.c (init_windows_ops): Likewise.
3396 * remote-sim.c (gdbsim_create_inferior): Don't use
3397 target_mark_running or target_mark_exited.
3398 (gdbsim_mourn_inferior): Don't call target_mark_exited.
3399 (init_gdbsim_ops): Adjust to register
3400 default_child_has_all_memory, default_child_has_memory,
3401 default_child_has_stack, default_child_has_registers,
3402 default_child_has_execution callbacks.
3404 * linux-nat.c (linux_nat_xfer_partial): If reading memory, and
3405 there's no inferior selected, defer to a lower stratum.
3407 2009-06-05 Tom Tromey <tromey@redhat.com>
3409 * varobj.c (update_dynamic_varobj_children): Wrap error text in
3411 (install_visualizer): Likewise.
3412 (varobj_set_visualizer): Likewise.
3414 2009-06-05 Marc Khouzam <marc.khouzam@ericsson.com>
3416 * mi/mi-main.c (mi_cmd_exec_continue)
3417 (mi_cmd_exec_interrupt): Adjust parsing of thread group
3418 ids to current reality, where they don't have any 'p' prefix.
3420 2009-06-05 Aleksandar Ristovski <aristovski@qnx.com>
3422 * corelow.c (core_open): Check for core_gdbarch before calling
3423 gdbarch_target_signal_from_host.
3425 2009-06-05 Tom Tromey <tromey@redhat.com>
3427 * c-exp.y (parse_number): Don't use K&R definition.
3429 (yyerror): Likewise.
3431 2009-06-04 Jan Kratochvil <jan.kratochvil@redhat.com>
3433 * varobj.c (varobj_update): Fix out of scope varobjs to not to change.
3435 2009-06-04 Ulrich Weigand <uweigand@de.ibm.com>
3437 * symtab.h: Rename SYMBOL_OPS to SYMBOL_COMPUTED_OPS.
3438 * ax-gdb.c (gen_var_ref): Likewise.
3439 * findvar.c (read_var_value, symbol_read_needs_frame): Likewise.
3440 * printcmd.c (address_info): Likewise.
3441 * dwarf2loc.c (dwarf_expr_frame_base): Likewise.
3442 * dwarf2read.c (dwarf2_symbol_mark_computed): Likewise.
3443 * symtab.h: Rename struct symbol_ops to struct symbol_computed_ops.
3444 * dwarf2loc.h: Likewise.
3445 * dwarf2loc.c (dwarf2_locexpr_funcs, dwarf2_loclist_funcs): Likewise.
3447 * symtab.h: (struct symbol_register_ops): New struct definition.
3448 (struct symbol): Make "ops" member a union of symbol_computed_ops and
3449 symbol_register_ops callback pointers.
3450 (SYMBOL_REGISTER_OPS): New macro.
3451 * tracepoint.c: Include "objfiles.h".
3452 (scope_info, collect_symbol): Use SYMBOL_REGISTER_OPS register_number
3453 callback to retrieve register numbers.
3454 * ax-gdb.c (gen_var_ref): Likewise.
3455 * findvar.c (read_var_value): Likewise.
3456 * printcmd.c (address_info): Likewise.
3458 * coffread.c (coff_reg_to_regnum): New function.
3459 (coff_register_funcs): New static variable.
3460 (process_coff_symbol): Do not call gdbarch_sdb_reg_to_regnum.
3461 Install SYMBOL_REGISTER_OPS callbacks.
3462 * mdebugread.c (mdebug_reg_to_regnum): New function.
3463 (mdebug_register_funcs): New static variable.
3464 (parse_symbol): Do not call gdbarch_ecoff_reg_to_regnum.
3465 Install SYMBOL_REGISTER_OPS callbacks.
3466 * stabsread.c (stab_reg_to_regnum): New function.
3467 (stab_register_funcs): New static variable.
3468 (define_symbol): Do not call gdbarch_stab_reg_to_regnum.
3469 Install SYMBOL_REGISTER_OPS callbacks.
3471 2009-06-03 Doug Evans <dje@google.com>
3473 * symfile.c (reread_symbols): Reset psymtabs_addrmap to NULL
3474 after discarding its contents.
3476 2009-06-03 Pedro Alves <pedro@codesourcery.com>
3478 * target.c: Include "exec.h".
3479 (update_current_target): Don't inherit to_sections or
3481 (target_get_section_table): New.
3482 (target_section_by_addr): Fetch the section table from the passed
3484 (memory_xfer_partial): Handle unmapped overlay sections before
3485 anything else. Get the overlay mapped address here. Adjust to
3486 use section_table_xfer_memory_partial.
3487 (get_target_memory): Request a TARGET_OBJECT_RAW_MEMORY object
3488 instead of TARGET_OBJECT_MEMORY.
3489 (target_resize_to_sections): Delete.
3490 (remove_target_sections): Adjust to remove target sections from
3491 `current_target_sections', and use resize_section_table.
3492 * target.h (struct target_ops) <to_sections, to_sections_end>:
3494 <to_get_section_table>: New method.
3495 (xfer_memory, print_section_info): Delete declarations.
3496 (struct target_section_table): New type.
3497 (target_get_section_table): Declare.
3498 (target_resize_to_sections): Delete declaration.
3499 (remove_target_sections): Delete declaration.
3500 * bfd-target.c (target_bfd_xfer_partial): Get the section table
3502 (target_bfd_get_section_table): New.
3503 (target_bfd_xclose): Adjust.
3504 (target_bfd_reopen): Store the section table in the to_data field.
3505 * corelow.c (core_data): New.
3506 (core_close): Adjust to release core_data and its sections.
3507 (core_open): Allocate core_data, and build its target sections
3509 (deprecated_core_resize_section_table): New.
3510 (core_files_info): Pass core_data to print_section_info.
3511 (core_xfer_partial): Adjust to use
3512 section_table_xfer_memory_partial for TARGET_OBJECT_MEMORY xfers.
3513 (init_core_ops): Do not install a deprecated_xfer_memory callback
3515 * solib.c (update_solib_list): Add the shared library sections
3516 to the current target sections table.
3517 * exec.c (current_target_sections_1): New global.
3518 (current_target_sections): New global.
3519 (exec_close_1): New function, refactored from exec_close. Remove
3520 the exec_bfd's sections from the current target sections table.
3521 Adjust to not use to_sections.
3522 (exec_close): Remove all target sections. Call exec_close_1.
3523 (exec_file_clear): Use exec_close_1 instead of unpushing the
3525 (exec_file_attach): Likewise. Adjust to not use to_sections. Add
3526 exec_bfd's sections to the current target sections table. Don't
3527 push the exec_ops target here.
3528 (resize_section_table): New.
3529 (add_target_sections): New.
3530 (remove_target_sections): Moved here.
3531 (section_table_xfer_memory): Adjust to implement the xfer_partial
3532 interface, and rename to...
3533 (section_table_xfer_memory_partial): ... this, replacing the
3534 current function of that same name.
3535 (exec_get_section_table): New.
3536 (exec_xfer_partial): New.
3537 (xfer_memory): Delete.
3538 (print_section_info): Replace the target_ops parameter by a
3539 target_section_table parameter.
3540 (exec_files_info, set_section_command, exec_set_section_address):
3541 Adjust to use the current sections table.
3542 (init_exec_ops): Do not register a deprecated_xfer_memory
3543 callback. Register to_xfer_partial and to_get_section_table
3545 * infrun.c (handle_inferior_event): Update comments around
3547 * rs6000-nat.c (xcoff_relocate_core): Adjust to use
3548 deprecated_core_resize_section_table.
3549 * exec.h (resize_section_table): Declare.
3550 (section_table_xfer_memory_partial): Add const char * argument.
3551 (remove_target_sections): Declare here.
3552 (add_target_sections): Declare.
3553 (print_section_info): Declare here.
3554 * gdbcore.h (deprecated_core_resize_section_table): Declare.
3556 2009-06-03 Ulrich Weigand <uweigand@de.ibm.com>
3558 * value.h (struct internalvar): Remove.
3559 (get_internalvar_integer): Add prototype.
3560 (set_internalvar_integer): Add prototype.
3561 (clear_internalvar): Add prototype.
3563 * value.c (struct internalvar): Move here. Add type member. Remove
3564 endian member. Add union_internalvar member instead of value member.
3565 (init_if_undefined_command): Use intvar->type.
3566 (create_internalvar): Do not initialize value/endian, but type.
3567 (create_internalvar_type_lazy): Call create_internalvar.
3568 (value_of_internalvar): Handle host-side internalvar contents.
3569 (set_internalvar_component): Likewise.
3570 (set_internalvar): Likewise.
3571 (get_internalvar_integer): New function.
3572 (clear_internalvar): Likewise.
3573 (set_internalvar_integer): Likewise.
3574 (preserve_values): Handle host-side internalvar contents.
3576 * breakpoint.c (set_breakpoint_count, set_tracepoint_count): Call
3577 set_internalvar_integer instead of set_internalvar.
3578 * findcmd.c (find_command): Likewise.
3579 * infrun.c (handle_inferior_event): Likewise.
3580 * source.c (forward_search_command, reverse_search_command): Likewise.
3581 * tracepoint.c (set_traceframe_num, set_tracepoint_num,
3582 set_traceframe_context): Likewise.
3584 * printcmd.c (x_command): Call clear_internalvar instead of
3586 * tracepoint.c (set_traceframe_context): Likewise.
3588 * breakpoint.c (get_number_trailer): Call get_internalvar_integer
3589 instead of value_of_internalvar.
3590 * linespec.c (decode_dollar): Likewise.
3592 * expprint.c (dump_subexp_body_standard): Use internalvar_name
3593 instead of accessing internalvar private elements.
3594 * valops.c (value_assign): Copy from original source instead of
3595 accessing internalvar private elements.
3597 2009-06-03 Ulrich Weigand <uweigand@de.ibm.com>
3599 * scm-lang.c (builtin_type_scm): Remove.
3600 (scm_lookup_name): Add GDBARCH parameter. Use it instead of
3601 objfile architecture. Use per-architecture builtin_scm_type instead
3602 of builtin_type_scm.
3603 (evaluate_exp): Pass expression architecture to scm_lookup_name.
3605 (scm_get_field): Add SIZE parameter. Use it instead of
3606 TYPE_LENGTH (builtin_type_scm).
3608 (build_scm_types): New function.
3609 (scm_type_data): New variable.
3610 (builtin_scm_type): New function.
3611 (_initialize_scheme_language): Do not initialize builtin_type_scm.
3612 Register build_scm_types as post-init function for scm_type_data.
3614 * scm-exp.c (scm_lreadr): Use per-architecture builtin_scm_type
3615 instead of builtin_type_scm.
3617 * scm-lang.h (SCM_CAR, SCM_CDR): Pass SCM_SIZE to scm_get_field.
3618 (scm_get_field): Add SIZE paramter.
3619 (scm_scmval_print): Remove prototype.
3620 (builtin_type_scm): Remove.
3621 (struct builtin_scm_type): Add structure definition.
3622 (builtin_scm_type): Add prototype.
3624 * scm-valprint.c (scm_inferior_print): Add TYPE parameter. Use it
3625 instead of builtin_core_addr type; do not use objfile architecture.
3626 (scm_scmlist_print): Add TYPE parameter. Use it to define SCM_SIZE.
3627 Pass type to scm_scmval_print.
3628 (scm_ipruk): Add TYPE parameter. Use it to define SCM_SIZE.
3629 (scm_scmval_print): Make static. Add TYPE parameter. Use it to
3630 define SCM_SIZE. Pass type to scm_ipruk and scm_scmlist_print.
3631 (scm_val_print): Pass type to scm_inferior_print and scm_scmval_print.
3633 2009-06-03 Ulrich Weigand <uweigand@de.ibm.com>
3635 * mdebugread.c (mdebug_type_void, mdebug_type_char, mdebug_type_short,
3636 mdebug_type_int, mdebug_type_int_32, mdebug_type_int_64,
3637 mdebug_type_long_32, mdebug_type_long_64, mdebug_type_long_long_64,
3638 mdebug_type_unsigned_char, mdebug_type_unsigned_short,
3639 mdebug_type_unsigned_int_32, mdebug_type_unsigned_int_64,
3640 mdebug_type_unsigned_long_32, mdebug_type_unsigned_long_64,
3641 mdebug_type_unsigned_long_long_64, mdebug_type_adr_32,
3642 mdebug_type_adr_64, mdebug_type_float, mdebug_type_double,
3643 mdebug_type_complex, mdebug_type_double_complex,
3644 mdebug_type_fixed_dec, mdebug_type_float_dec, mdebug_type_string):
3647 (basic_type_data): New global variable.
3648 (basic_type): New function.
3649 (parse_type): Remove static basic type map map_bt. Call basic_type
3650 to get basic types instead of using mdebug_type_ variables.
3652 (parse_symbol): Use builtin types instead of mdebug_type_ variables.
3653 (upgrade_type): Likewise.
3654 (parse_procedure): Likewise.
3655 (psymtab_to_symtab_1): Likewise.
3657 (_initialize_mdebugread): Do not initialize mdebug_type_ variables.
3658 Initialize basic_type_data.
3660 2009-06-03 Ulrich Weigand <uweigand@de.ibm.com>
3662 * dfp.h (decimal_binop): Convert LEN_RESULT to input parameter.
3663 * dfp.c (promote_decimal): Remove.
3664 (decimal_binop): Convert LEN_RESULT to input parameter.
3665 Remove call to decimal_binop.
3666 (decimal_compare): Remove call to decimal_binop.
3668 * valarith.c (value_binop): Pass desired result type length
3671 2009-06-01 Tristan Gingold <gingold@adacore.com>
3673 * configure.tgt (avr): Set gdb_sim to use the simulator.
3675 2009-05-29 Doug Evans <dje@google.com>
3677 * infrun.c (prepare_to_proceed): Document. Assert !non_stop.
3678 If scheduler-locking is enabled, we're not going to be singlestepping
3679 any other previously stopped thread.
3681 2009-05-29 Pedro Alves <pedro@codesourcery.com>
3683 * mi/mi-interp.c (mi_on_resume): Initialize `count' to 0.
3685 2009-05-29 Eli Zaretskii <eliz@gnu.org>
3687 * i386-tdep.c (i386_go32_init_abi): Use SVR4 register numbering
3688 for stabs and COFF debug info.
3690 2009-05-28 Pedro Alves <pedro@codesourcery.com>
3692 * infrun.c (handle_inferior_event): When thread hoping, switch
3693 inferior_ptid to the event thread before removing breakpoints from
3694 the target. If not stopping, also try to revert back to a thread
3695 that was doing a "next". Check if that thread still exists before
3697 (currently_stepping_thread): Delete and merge with ...
3698 (currently_stepping): ... this.
3699 (currently_stepping_callback): Rename to ...
3700 (currently_stepping_or_nexting_callback): ... this, and also
3701 return true if the thread was stepping over a call (has a
3702 step-resume breakpoint).
3704 2009-05-28 Tom Tromey <tromey@redhat.com>
3706 * python/python.c (gdbpy_parameter): Rename. Fix error message.
3707 (GdbMethods): Change "get_parameter" to "parameter".
3709 2009-05-28 Pierre Muller <muller@ics.u-strasbg.fr>
3710 Paul Pluzhnikov <ppluzhnikov@google.com>
3712 * configure.ac (!have_libpython): Add python-prettyprint source
3714 * configure: Regenerate.
3715 * python/python-prettyprint.c: Move "#ifdef HAVE_PYTHON" before
3718 2009-05-27 Vladimir Prus <vladimir@codesourcery.com>
3719 Tom Tromey <tromey@redhat.com>
3720 Thiago Jung Bauermann <bauerman@br.ibm.com>
3722 * mi/mi-main.c (mi_cmd_list_features): List "python" feature.
3723 * varobj.h (varobj_set_visualizer): Declare.
3724 (varobj_get_display_hint): Likewise.
3725 (varobj_update_result_t) <children_changed, value_installed>: New
3727 * mi/mi-cmds.c (mi_cmds): Add var-set-visualizer.
3728 * mi/mi-cmds.h (mi_cmd_var_set_visualizer,
3729 mi_cmd_var_set_child_range): Declare.
3730 * mi/mi-cmd-var.c (mi_cmd_var_set_visualizer): New function.
3731 (mi_cmd_var_list_children): Emit display hint.
3732 (varobj_update_one): Emit display hint. Handle dynamic children.
3733 * python/python.c (GdbMethods): Add "default_visualizer".
3734 * python/python-internal.h (apply_varobj_pretty_printer,
3735 gdbpy_get_varobj_pretty_printer, gdbpy_get_display_hint):
3737 (gdbpy_default_visualizer): Likewise.
3738 * varobj.c: Include python.h, python-internal.h.
3739 (PyObject): New typedef.
3740 (struct varobj) <children_requested, pretty_printer>: New fields.
3741 (varobj_create): Call install_default_visualizer.
3742 (instantiate_pretty_printer): New function.
3743 (varobj_set_display_format): Update.
3744 (varobj_get_display_hint): New function.
3745 (update_dynamic_varobj_children): New function.
3746 (varobj_get_num_children): Handle dynamic children.
3747 (varobj_list_children): Likewise.
3748 (install_new_value): Likewise.
3749 (varobj_add_child): New function.
3750 (install_visualizer): Likewise.
3751 (install_default_visualizer): Likewise.
3752 (varobj_set_visualizer): Likewise.
3753 (varobj_update): Handle dynamic children.
3754 (create_child): Use create_child_with_value.
3755 (create_child_with_value): New function.
3756 (value_get_print_value): Call pretty printer. Add value_formatter
3758 (c_value_of_variable): Update.
3759 (varobj_invalidate): Always free all_rootvarobj.
3760 * python/python-prettyprint.c (apply_varobj_pretty_printer): New
3762 (gdbpy_get_varobj_pretty_printer): Likewise.
3763 (gdbpy_default_visualizer): Likewise.
3765 2009-05-27 Tom Tromey <tromey@redhat.com>
3766 Thiago Jung Bauermann <bauerman@br.ibm.com>
3767 Phil Muldoon <pmuldoon@redhat.com>
3768 Paul Pluzhnikov <ppluzhnikov@google.com>
3769 Vladimir Prus <vladimir@codesourcery.com>
3771 * python/python-value.c (value_object_to_value): New function.
3772 * python/python-internal.h: Include frameobject.h.
3773 (gdbpy_children_cst, gdbpy_to_string_cst, gdbpy_display_hint_cst):
3775 (value_object_to_value): Declare.
3776 * printcmd.c (struct format_data) <raw>: New field.
3777 (last_format): Default to 0.
3778 (decode_format): Initialize val.raw. Handle /r flag.
3779 (print_command_1): Initialize fmt.raw and opts.raw.
3780 (output_command): Likewise.
3781 (x_command): Fix initialization of fmt.format. Initialize
3783 (display_command): Initialize fmt.raw.
3784 (do_one_display): Set opts.raw.
3785 * python/python.c (gdbpy_to_string_cst, gdbpy_children_cst,
3786 gdbpy_display_hint_cst): New globals.
3787 (_initialize_python): Initialize them. Set gdb.pretty_printers.
3788 * cp-valprint.c: Include python.h.
3789 (cp_print_value): Call apply_val_pretty_printer.
3790 * python/python.h (apply_val_pretty_printer): Declare.
3791 * stack.c (print_this_frame_argument_p): Remove.
3792 (print_frame_args): Compute summary flag. Don't use
3793 print_this_frame_argument_p.
3794 * valprint.c: Include python.h.
3795 (user_print_options): Initialize new fields.
3796 (scalar_type_p): New function.
3797 (val_print): Handle 'raw' and 'summary' modes. Call
3798 apply_val_pretty_printer.
3799 (value_print): Handle 'raw' mode.
3800 * valprint.h (struct value_print_options) <raw, summary>: New
3802 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-prettyprint.o
3803 (SUBDIR_PYTHON_SRCS): Add python-prettyprint.c.
3804 (python-prettyprint.o): New target.
3805 * python/python-prettyprint.c: New file.
3807 2009-05-27 Tom Tromey <tromey@redhat.com>
3808 Paul Pluzhnikov <ppluzhnikov@google.com>
3810 * mi/mi-main.c (mi_cmd_data_evaluate_expression): Use
3812 * cli/cli-dump.c (dump_value_to_file): Use value_address.
3813 * valprint.c (common_val_print): Likewise.
3814 * v850-tdep.c (v850_push_dummy_call): Use value_address.
3815 * tracepoint.c (encode_actions): Use value_address.
3816 * printcmd.c (print_formatted): Use value_address.
3817 (x_command): Likewise.
3818 * p-valprint.c (pascal_object_print_static_field): Use
3820 * mn10300-tdep.c (mn10300_push_dummy_call): Use value_address.
3821 * mips-tdep.c (mips_eabi_push_dummy_call): Use value_address.
3822 * m32r-tdep.c (m32r_push_dummy_call): Use value_address.
3823 * jv-valprint.c (java_value_print): Use value_address.
3824 * infcall.c (find_function_addr): Use value_address.
3825 * gnu-v3-abi.c (gnuv3_rtti_type): Use value_address.
3826 * gnu-v2-abi.c (gnuv2_value_rtti_type): Use value_address.
3827 * frv-tdep.c (frv_push_dummy_call): Use value_address.
3828 * frame.c (frame_register_unwind): Use value_address.
3829 (frame_unwind_register_value): Likewise.
3830 * darwin-nat-info.c (info_mach_region_command): Use
3832 * cp-valprint.c (cp_print_static_field): Use value_address.
3833 * c-valprint.c (c_value_print): Use value_address.
3834 * breakpoint.c (update_watchpoint): Use value_address.
3835 (can_use_hardware_watchpoint): Likewise.
3836 * ada-valprint.c (ada_val_print_1): Use value_address.
3837 (ada_value_print): Likewise.
3838 * ada-tasks.c (read_fat_string_value): Use value_address.
3839 * jv-lang.c (java_link_class_type): Use set_value_address.
3840 (java_link_class_type): Likewise.
3841 (get_java_utf8_name): Use value_address.
3842 (type_from_class): Likewise.
3843 (java_link_class_type): Likewise.
3844 * findvar.c (value_of_register): Use set_value_address.
3845 (read_var_value): Likewise.
3846 (read_var_value): Likewise.
3847 * eval.c (evaluate_subexp_standard): Use set_value_address.
3848 (evaluate_subexp_standard): Use value_address.
3849 * dwarf2loc.c (dwarf2_evaluate_loc_desc): Use set_value_address.
3850 * ada-lang.c (coerce_unspec_val_to_type): Use set_value_address.
3851 (ada_value_primitive_packed_val): Likewise.
3852 (ensure_lval): Likewise.
3853 (thin_data_pntr): Use value_address.
3854 (desc_bounds): Likewise.
3855 (ada_value_primitive_packed_val): Likewise.
3856 (value_assign_to_component): Likewise.
3857 (ensure_lval): Likewise.
3858 (make_array_descriptor): Likewise.
3859 (ada_to_fixed_value): Likewise.
3860 (unwrap_value): Likewise.
3861 * value.c (deprecated_value_address_hack): Remove.
3862 (value_address): New function.
3863 (value_raw_address): Likewise.
3864 (set_value_address): Likewise.
3865 (value_fn_field): Use set_value_address.
3866 (value_from_contents_and_address): Likewise.
3867 (value_fn_field): Likewise.
3868 (allocate_value_lazy): Don't use VALUE_ADDRESS.
3869 (value_as_address): Use value_address.
3870 (value_static_field): Likewise.
3871 * valops.c (search_struct_field): Use set_value_address.
3872 (value_at): Likewise.
3873 (value_at_lazy): Likewise.
3874 (value_repeat): Likewise.
3875 (value_cast_structs): Use value_address.
3876 (value_cast): Likewise.
3877 (value_fetch_lazy): Likewise.
3878 (value_assign): Likewise.
3879 (value_repeat): Likewise.
3880 (address_of_variable): Likewise.
3881 (value_coerce_array): Likewise.
3882 (value_coerce_function): Likewise.
3883 (value_addr): Likewise.
3884 (search_struct_field): Likewise.
3885 (search_struct_method): Likewise.
3886 (find_method_list): Likewise.
3887 (value_struct_elt_for_reference): Likewise.
3888 (value_full_object): Likewise.
3889 * jv-valprint.c (java_value_print): Use set_value_address.
3890 * value.h (deprecated_value_address_hack): Remove.
3891 (VALUE_ADDRESS): Remove.
3892 (value_address): Declare.
3893 (value_raw_address): Declare.
3894 (set_value_address): Declare.
3896 2009-05-27 Tom Tromey <tromey@redhat.com>
3897 Thiago Jung Bauermann <bauerman@br.ibm.com>
3898 Phil Muldoon <pmuldoon@redhat.com>
3899 Paul Pluzhnikov <ppluzhnikov@google.com>
3901 * python/python.c (_initialize_python): Call
3902 gdbpy_initialize_types.
3903 (GdbMethods): Add "lookup_type".
3904 * python/python-value.c (value_object) <type>: New field.
3905 (valpy_dealloc): Decref type.
3906 (valpy_new): Initialize type.
3907 (valpy_get_type): New function.
3908 (value_to_value_object): Initialize type.
3909 (valpy_cast): New function.
3910 (value_object_getset): Add "type".
3911 (value_object_methods): Add "cast".
3912 * python/python-internal.h (type_to_type_object): Declare.
3913 (type_object_to_type): Likewise.
3914 (gdbpy_initialize_types): Likewise.
3915 (gdbpy_lookup_type): Declare.
3916 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-type.o.
3917 (SUBDIR_PYTHON_SRCS): Add python-type.c.
3918 (python-type.o): New target.
3919 * python/python-type.c: New file.
3921 2009-05-27 Tom Tromey <tromey@redhat.com>
3922 Thiago Jung Bauermann <bauerman@br.ibm.com>
3923 Phil Muldoon <pmuldoon@redhat.com>
3925 * python/python.c: Include objfiles.h, observer.h.
3926 (gdbpy_auto_load): New global.
3927 (gdbpy_current_objfile): Likewise.
3928 (GDBPY_AUTO_FILENAME): New define.
3929 (gdbpy_new_objfile): New function.
3930 (gdbpy_get_current_objfile): Likewise.
3931 (gdbpy_objfiles): Likewise.
3932 (_initialize_python): Add "maint set auto-load". Call
3933 gdbpy_initialize_objfile. Attach objfile observer.
3934 (GdbMethods): New methods current_objfile, objfiles.
3935 * python/python-objfile.c: New file.
3936 * python/python-internal.h (objfile_to_objfile_object): Declare.
3937 (objfpy_get_printers): Likewise.
3938 (gdbpy_initialize_objfile): Likewise.
3939 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-objfile.o.
3940 (SUBDIR_PYTHON_SRCS): Add python-objfile.c.
3941 (python-objfile.o): New target.
3943 2009-05-27 Pedro Alves <pedro@codesourcery.com>
3945 * infrun.c (follow_exec): Clear the stop_requested flag.
3946 * linux-nat.c (linux_handle_extended_wait) <PTRACE_EVENT_EXEC>:
3949 2009-05-27 Aleksandar Ristovski <aristovski@qnx.com>
3951 * nto-procfs.c (get_regset): Pass correct pointer.
3953 2009-05-26 Doug Evans <dje@google.com>
3955 * dwarf2read.c (follow_die_ref): Add comment.
3956 (dwarf2_mark_helper): Tweak comment.
3957 (dwarf2_mark): Move description to its proper place.
3959 2009-05-25 Pierre Muller <muller@ics.u-strasbg.fr>
3961 * procfs.c (procfs_wait): Add options parameter.
3963 2009-05-24 Doug Evans <dje@google.com>
3965 Global renaming of find_thread_pid to find_thread_ptid.
3966 * gdbthread.h (find_thread_ptid): Renamed from find_thread_pid.
3967 * thread.c (find_thread_ptid): Renamed from find_thread_pid.
3968 All callers updated.
3970 * infrun.c (follow_fork): Initialize new step_* locals
3971 to avoid "may be used uninitialized" warnings.
3973 2009-05-24 Pedro Alves <pedro@codesourcery.com>
3975 * inflow.c (copy_terminal_info): Deep copy `run_terminal'.
3977 2009-05-24 Pedro Alves <pedro@codesourcery.com>
3979 * gdbthread.h (struct thread_info): New `pending_follow' field.
3980 * thread.c (new_thread): New function.
3981 (add_thread_silent): Use it.
3982 * breakpoint.c (internal_breakpoint_number): New global, moved
3984 (create_internal_breakpoint): ... this.
3985 (clone_momentary_breakpoint): New.
3986 * breakpoint.h (clone_momentary_breakpoint): Declare.
3987 * infrun.c (nullify_last_target_wait_ptid): Move declaration
3989 (pending_follow): Delete.
3990 (follow_fork): Handle pending follow fork event here. Moved the
3991 preserving of thread stepping state here.
3992 (resume): Don't handle pending follow fork events here. Only
3993 install the inferior's terminal modes if we're about to resume it.
3994 (proceed): Handle possible pending follow fork events here.
3995 (init_wait_for_inferior): No need to clear pending_follow anymore,
3997 (handle_inferior_event): Adjust to per-thread `pending_follow'.
3998 Call `follow_fork' to handle following the fork. If the
3999 follow-fork is cancelled, stop stepping.
4000 * linux-nat.c (linux_child_follow_fork): Adjust to per-thread
4001 `pending_follow' events. Remove code that handled preserving the
4002 thread stepping state.
4003 * inf-ptrace.c (inf_ptrace_follow_fork): Ditto.
4004 * inf-ttrace.c (inf_ttrace_follow_fork): Ditto.
4006 2009-05-24 Pierre Muller <muller@ics.u-strasbg.fr>
4008 * symfile.c (add_shared_symbol_files_command): Remove
4009 prototype and function.
4010 (_initialize _symfile): Move "add-shared-symbol-files"
4011 command and "assf" alias.
4012 * windows-nat.c (_initialize_windows_nat): to here.
4013 Change "add-shared-symbol-files" to alias.
4015 * config/i386/cygwin.mh: Remove NAT_FILE.
4016 * config/i386/mingw.mh: Remove NAT_FILE.
4017 * config/i386/mingw64.mh: Remove NAT_FILE.
4018 * config/i386/nm-cygwin.h: Remove file.
4019 * config/i386/nm-cygwin64.h: Remove file.
4021 2009-05-24 Hui Zhu <teawater@gmail.com>
4023 * i386-linux-tdep.c (I386_LINUX_RECORD_SIZE_*,
4024 I386_LINUX_RECORD_IOCTL_*,
4025 I386_LINUX_RECORD_FCNTL_*) Removed.
4026 (i386_linux_init_abi): Change size of record from macros to
4029 2009-05-24 Hui Zhu <teawater@gmail.com>
4031 * i386-linux-tdep.c (i386_linux_init_abi): Remove size_char.
4032 * linux-record.c (record_linux_system_call): Ditto.
4033 * linux-record.h (linux_record_tdep): Ditto.
4035 2009-05-23 Jan Kratochvil <jan.kratochvil@redhat.com>
4037 Replace the savestring calls by xstrdup calls where possible.
4038 * breakpoint.c (condition_command, set_raw_breakpoint)
4039 (create_catchpoint, update_breakpoint_locations): Replace the
4040 savestring calls by xstrdup calls where possible.
4041 * buildsym.c (start_subfile, patch_subfile_names, record_debugformat)
4042 (record_producer): Likewise.
4043 * coffread.c (coff_start_symtab, complete_symtab): Likewise.
4044 * corefile.c (set_gnutarget): Likewise.
4045 * dbxread.c (add_new_header_file): Likewise.
4046 * demangle.c (set_demangling_command, set_demangling_style): Likewise.
4047 * event-top.c (push_prompt, pop_prompt, command_line_handler)
4048 (set_async_prompt): Likewise.
4049 * infcmd.c (set_inferior_io_terminal, attach_command_post_wait):
4051 * language.c (set_language_command, _initialize_language): Likewise.
4052 * linespec.c (decode_line_2): Likewise.
4053 * rs6000-nat.c (add_vmap): Likewise.
4054 * top.c (set_prompt, init_history, init_main): Likewise.
4055 * tracepoint.c (stringify_collection_list): Likewise.
4056 * varobj.c (varobj_create): Remove variable expr_len. Replace the
4057 savestring calls by xstrdup calls where possible.
4058 (value_of_root, c_name_of_variable, c_describe_child): Replace the
4059 savestring calls by xstrdup calls where possible.
4060 * xcoffread.c (complete_symtab): Likewise.
4061 * cli/cli-script.c (build_command_line, define_command): Likewise.
4062 * cli/cli-setshow.c (do_setshow_command): Likewise.
4064 2009-05-23 Jan Kratochvil <jan.kratochvil@redhat.com>
4066 Remove already unreachable code.
4067 * varobj.c (varobj_get_handle): Fix comment when error is called.
4068 All callers updated.
4070 2009-05-23 Eli Zaretskii <eliz@gnu.org>
4072 * README (`configure' options): Document GDB-specific options to
4075 * symtab.c (skip_prologue_using_lineinfo): New function.
4076 (find_function_start_sal): Use it to get to the first line of
4077 function's body that has an entry in the lineinfo table.
4079 * symmisc.c (dump_symtab): Switch the current language to
4080 the language of the symtab we are dumping only if the symtab's
4081 language is neither language_auto nor language_unknown.
4083 * coffread.c (coff_symtab_read): Set language_minimal as the
4084 language for the "_globals_" pseudo-file.
4085 (process_coff_symbol): Set the symbol's language to the language
4088 2009-05-22 Pedro Alves <pedro@codesourcery.com>
4090 * target.h (struct section_table): Rename to ...
4091 (struct target_section): ... this.
4092 * exec.c: Adjust all references.
4093 * exec.h: Adjust all references.
4094 * nto-tdep.c: Adjust all references.
4095 * nto-tdep.h: Adjust all references.
4096 * ppc-linux-tdep.c: Adjust all references.
4097 * rs6000-nat.c: Adjust all references.
4098 * s390-tdep.c: Adjust all references.
4099 * solib-darwin.c: Adjust all references.
4100 * solib-frv.c: Adjust all references.
4101 * solib-irix.c: Adjust all references.
4102 * solib-null.c: Adjust all references.
4103 * solib-osf.c: Adjust all references.
4104 * solib-pa64.c: Adjust all references.
4105 * solib-som.c: Adjust all references.
4106 * solib-sunos.c: Adjust all references.
4107 * solib-svr4.c: Adjust all references.
4108 * solib-target.c: Adjust all references.
4109 * solib.c: Adjust all references.
4110 * solist.h: Adjust all references.
4111 * symfile.c: Adjust all references.
4112 * symfile.h: Adjust all references.
4113 * target.c: Adjust all references.
4115 2009-05-22 Hui Zhu <teawater@gmail.com>
4117 Add sys_fcntl argument interfaces to linux_record_tdep.
4119 * linux-record.h (linux_record_tdep): Add fcntl_F_GETLK,
4120 fcntl_F_GETLK64, fcntl_F_SETLK64 and fcntl_F_SETLKW64 to be
4122 * i386-linux-tdep.c (I386_LINUX_RECORD_FCNTL_F_GETLK,
4123 I386_LINUX_RECORD_FCNTL_F_GETLK64,
4124 I386_LINUX_RECORD_FCNTL_F_SETLK64,
4125 I386_LINUX_RECORD_FCNTL_F_SETLKW64): New macros. The values
4126 of I386 Linux sys_fcntl arguments.
4127 (i386_linux_init_abi): Set macros values to linux_record_tdep.
4128 * linux-record.c (record_linux_system_call): Change to use
4129 the interface in linux_record_tdep in sys_fcntl and
4132 * linux-record.c (record_linux_system_call): Fix the process
4133 record build error about type in CYGWIN.
4135 2009-05-22 Pedro Alves <pedro@codesourcery.com>
4137 * inflow.c (kill_command): Delete left over static declaration.
4139 2009-05-22 Pedro Alves <pedro@codesourcery.com>
4141 * bfd-target.c: Don't include gdb_assert.h or gdb_string.h.
4143 (struct section_closure): Delete.
4144 (add_to_section_table): Delete.
4145 (build_target_sections_from_bfd): Delete.
4146 (target_bfd_xfer_partial): Use section_table_xfer_memory_partial.
4147 (target_bfd_reopen): Use build_section_table.
4148 * exec.c (xfer_memory): Move most code except for overlay
4149 debugging support from here...
4150 (section_table_xfer_memory): ... to this new function.
4151 (section_table_xfer_memory_partial): New.
4152 * exec.h (section_table_xfer_memory_partial): Declare.
4153 * bfd-target.h (build_target_sections_from_bfd): Delete
4156 2009-05-22 Pedro Alves <pedro@codesourcery.com>
4158 * remote.c (compare_sections_command): Don't declare exec_bfd.
4159 * tracepoint.c: Include "gdbcore.h".
4160 (remote_set_transparent_ranges): Don't declare exec_bfd.
4162 2009-05-21 Pedro Alves <pedro@codesourcery.com>
4164 * aix-thread.c (init_aix_thread_ops): Whitespace.
4166 2009-05-21 Pedro Alves <pedro@codesourcery.com>
4168 * dec-thread.c (dec_thread_wait): Add options parameter. Use it
4169 to call the to_wait method in the target beneath.
4170 * remote-m32r-sdi.c (m32r_wait): Add options parameter.
4172 2009-05-21 Joel Brobecker <brobecker@adacore.com>
4174 * aix-thread.c (aix_thread_wait): Add options parameter. Use it
4175 to call the to_wait method in the target_beneath.
4177 2009-05-21 Pedro Alves <pedro@codesourcery.com>
4179 * linux-nat.c (linux_nat_terminal_inferior)
4180 (linux_nat_terminal_ours): Don't check sync_execution.
4181 * remote.c (remote_terminal_inferior, remote_terminal_ours):
4182 Don't check sync_execution. Update comments.
4183 * target.c (target_terminal_inferior): New.
4184 * target.h (target_terminal_inferior): Delete macro, and declare
4186 * event-top.c (async_disable_stdin): Make idempotent. Don't give
4187 the target the terminal here.
4188 * inflow.c (terminal_ours_1): Don't return early without setting
4191 2009-05-21 Pedro Alves <pedro@codesourcery.com>
4193 * target.h (TARGET_WNOHANG): New.
4194 * target.c (target_wait): Add `options' argument. Adjust.
4195 (struct target_ops) <to_wait>: Add `options' argument.
4196 (target_wait): Add `options' argument.
4197 * infrun.c (wait_for_inferior): Pass 0 as options to
4198 target_wait (blocking wait).
4199 (fetch_inferior_event): Pass TARGET_WNOHANG as options to
4201 * fork-child.c (startup_inferior): Pass 0 as options to
4202 target_wait (blocking wait).
4203 * linux-nat.c (linux_nat_create_inferior): Remove async masking.
4204 (linux_nat_wait_1): Add `target_options' argument. Use it instead
4205 of checking on target_can_async_p.
4206 (linux_nat_wait): Add `target_options' argument. Adjust.
4207 * remote.c (remote_wait_ns): Add `options' argument. Adjust to
4208 check on TARGET_WNOWAIT instead of checking on remote_is_async_p.
4209 (remote_wait_as): Add `options' argument. Adjust to check on
4210 TARGET_WNOWAIT instead of checking on remote_is_async_p. If doing
4211 a blocking wait, keep waiting until an interesting event comes
4213 (remote_wait): Add `options' argument. Don't loop here if the
4214 target is in async mode, and a blocking wait has been requested.
4216 * top.c (deprecated_target_wait_hook): Add `options' argument.
4217 * linux-thread-db.c (thread_db_wait): Add `options' argument, and
4218 pass it down to the layer beneath.
4219 * inf-ptrace.c (inf_ptrace_wait): Add `options' argument.
4220 * record.c (record_beneath_to_wait): Add `options' argument.
4221 (record_wait): Add `options' argument, and pass it down to the
4223 * bsd-uthread.c (bsd_uthread_wait): Add `options' argument.
4224 * darwin-nat.c (darwin_wait): Likewise.
4225 * defs.h (deprecated_target_wait_hook): Likewise.
4226 * gnu-nat.c (gnu_wait): Add `options' argument.
4227 * go32-nat.c (go32_wait): Likewise.
4228 * hpux-thread.c (hpux_thread_wait): Add `options' argument, and
4229 pass it down to the layer beneath.
4230 * inf-ttrace.c (inf_ttrace_wait): Add `options' argument.
4231 * monitor.c (monitor_wait): Likewise.
4232 * nto-procfs.c (procfs_wait): Likewise.
4233 * remote-mips.c (mips_wait): Add `options' argument.
4234 * remote-sim.c (gdbsim_wait): Likewise.
4235 * rs6000-nat.c (rs6000_wait): Add `options' argument.
4236 * sol-thread.c (sol_thread_wait): Add `options' argument, and pass
4237 it down to the layer beneath.
4238 * spu-linux-nat.c (spu_child_wait): Add `options' argument.
4239 * windows-nat.c (windows_wait): Likewise.
4240 * tui/tui-hooks.c (tui_target_wait_hook): Likewise. Adjust.
4242 2009-05-21 Pedro Alves <pedro@codesourcery.com>
4244 * mi/mi-interp.c (mi_on_resume): Account for whole process
4247 2009-05-21 Jan Kratochvil <jan.kratochvil@redhat.com>
4249 * m2-exp.y (MAX_FUNC): Fix trailing UNOP_MAX.
4251 2009-05-21 Jan Kratochvil <jan.kratochvil@redhat.com>
4253 * dwarf2read.c (set_cu_language): Recognize also DW_LANG_C99.
4255 2009-05-21 Jan Kratochvil <jan.kratochvil@redhat.com>
4257 Fix parsing DW_AT_const_value using DW_FORM_string.
4258 * dwarf2read.c (dwarf2_const_value <DW_FORM_string>): New.
4260 2009-05-20 Joel Brobecker <brobecker@adacore.com>
4262 * aix-thread.c (giter_count): Do not count the main thread.
4263 (giter_accum): Do not include the main thread.
4265 2009-05-19 Jan Kratochvil <jan.kratochvil@redhat.com>
4267 Remove the PROT parameter from openp.
4268 * source.c (openp): Remove the parameter PROT. Assertion check MODE.
4269 defs.h (openp): Update the prototype.
4270 Update all the openp callers.
4272 2009-05-19 Pedro Alves <pedro@codesourcery.com>
4274 * inflow.c (kill_command): Moved to infcmd.c.
4275 (_initialize_inflow): Don't add the "kill" command or clear
4277 * infcmd.c (kill_command): Moved here from inflow.c.
4278 (_initialize_infcmd): Add the "kill" command here.
4280 2009-05-19 Pedro Alves <pedro@codesourcery.com>
4282 * fork-child.c: Don't include frame.h. Include terminal.h.
4283 (fork_inferior): Call new_tty_postfork after forking adn adding
4284 the child to the inferior list.
4285 * inferior.h (new_tty_prefork, gdb_has_a_terminal): Don't declare
4287 * inflow.c (struct terminal_info): Remove const qualifier from
4288 `run_terminal' field.
4289 (inferior_thisrun_terminal): Tweak comment.
4290 (inflow_inferior_exit): Release the `run_terminal' field.
4291 (copy_terminal_info): New function.
4292 (new_tty_postfork): New function.
4293 * terminal.h (new_tty_prefork, new_tty, new_tty_postfork,
4294 (copy_terminal_info, gdb_has_a_terminal, gdb_setpgid): Declare.
4295 * inf-ptrace.c: Include terminal.h.
4296 (inf_ptrace_follow_fork): Copy the parent's terminal info to the
4298 * linux-nat.c: Include terminal.h.
4299 (linux_child_follow_fork): Copy the parent's terminal info to the
4301 * inf-ttrace.c: Include terminal.h.
4302 (inf_ttrace_follow_fork): Copy the parent's terminal info to the
4305 2009-05-19 Pedro Alves <pedro@codesourcery.com>
4307 * breakpoint.c (insert_breakpoints, breakpoint_init_inferior)
4308 (update_global_location_list): Use gdbarch_has_global_breakpoints
4309 instead of gdbarch_has_global_solist and
4310 target_supports_multi_process.
4311 * dicos-tdep.c (dicos_init_abi): Set
4312 gdbarch_has_global_breakpoints.
4313 * gdbarch.sh (has_global_solist): Update comment.
4314 (has_global_breakpoints): New.
4315 * remote.c (remote_start_remote): Use
4316 gdbarch_has_global_breakpoints instead of
4317 gdbarch_has_global_solist.
4318 * target.c (target_detach): Use gdbarch_has_global_breakpoints
4319 instead of gdbarch_has_global_solist.
4320 * infcmd.c (attach_command): Use gdbarch_has_global_solist instead
4321 of target_supports_multi_process.
4323 2009-05-18 Paul Pluzhnikov <ppluzhnikov@google.com>
4325 * objc-lang.c (find_methods): Plug a small memory leak.
4327 2009-05-18 Pedro Alves <pedro@codesourcery.com>
4329 * solib-svr4.c: Include observer.h.
4330 (debug_base, debug_loader_offset_p, debug_loader_offset)
4331 (debug_loader_name, main_lm_addr): Move these globals...
4332 (struct svr4_info): ... into this new structure.
4333 (svr4_info_p): New typedef.
4334 (svr4_info): New global.
4335 (get_svr4_info, remove_svr4_info, solib_svr4_inferior_exit): New
4337 (locate_base, solib_svr4_r_map, solib_svr4_r_brk)
4338 (solib_svr4_r_ldsomap): Add svr4_info argument. Adjust to
4340 (open_symbol_file_object): Adjust to per-inferior svr4.
4341 (svr4_default_sos, svr4_current_sos, svr4_fetch_objfile_link_map):
4343 (enable_break): Add svr4_info argument. Adjust to per-inferior
4345 (enable_break, svr4_solib_create_inferior_hook, svr4_clear_solib):
4346 Adjust to per-inferior svr4.
4347 (_initialize_svr4_solib): Install the solib_svr4_inferior_exit
4350 2009-05-18 Pedro Alves <pedro@codesourcery.com>
4352 * linux-nat.h (linux_proc_get_tgid): Declare.
4353 * linux-nat.c (linux_proc_get_tgid): New.
4354 * linux-thread-db.c (struct thread_db_info): New field
4355 `need_stale_parent_threads_check'.
4356 (add_thread_db_info): Set it.
4357 (find_new_threads_callback): Ignore stale fork parent threads.
4358 (thread_db_resume): New.
4359 (init_thread_db_ops): Install thread_db_resume.
4361 2009-05-18 Pedro Alves <pedro@codesourcery.com>
4363 * fork-child.c (fork_inferior): Only reset the thread list if this
4364 is the first inferior.
4365 (startup_inferior): If the target support multi-process, tell it
4366 to resume only the new process.
4367 * linux-nat.c (num_lwps): Delete global.
4368 (purge_lwp_list): New function.
4369 (num_lwps): New function.
4370 (add_lwp, delete_lwp): Adjust.
4372 (iterate_over_lwps): Add filter argument. Handle it.
4373 (linux_nat_attach): Remove FIXME note.
4374 (linux_nat_detach): Adjust to iterate over threads of the inferior
4375 we're detaching from. Adjust to num_lwps being a function. Don't
4376 assume the head of the lwp list is the main thread of the process
4377 we're detaching from. Don't destroy the LWP list.
4378 (resume_callback): Add debug output.
4379 (linux_nat_resume): Handle resuming a single inferior. Allow a
4380 wildcard resume in non-stop mode.
4381 (linux_handle_extended_wait): Don't assume inferior_ptid is the
4382 correct inferior of the parent LWP.
4383 (status_callback): Also check lp->waitstatus.
4384 (select_event_lwp): Add new filter parameter. Handle it.
4385 (linux_nat_filter_event): Adjust to num_lwps being a function.
4386 (linux_nat_wait_1): When adding the first lwp of the inferior, use
4387 an is_lwp check instead of checking for the number of lwps.
4388 (linux_nat_wait_1): Handle waiting for a specific tgid. Handle
4389 pending process exit statuses.
4390 (linux_nat_mourn_inferior): Don't destroy all the LWP info.
4391 Instead delete LWPs of the inferior that we're mourning. Don't
4392 unregister from the event loop here.
4393 (linux_nat_pid_to_str): Use `num_lwps'.
4394 (linux_nat_make_corefile_notes): Adjust to walk over lwps of a
4396 (linux_nat_is_async_p): Check if async was masked out.
4397 (linux_multi_process): New global.
4398 (linux_nat_supports_multi_process): New.
4399 (linux_nat_stop_lwp): Remove LWP filtering. It is done by the
4401 (linux_nat_stop): Adjust to make iterate_over_lwps itself do the
4403 (linux_nat_close): New.
4404 (linux_nat_add_target): Register linux_nat_close and
4405 linux_nat_supports_multi_process.
4406 * linux-nat.h (iterate_over_lwps): Add filter argument.
4407 * linux-thread-db.c (thread_db_handle): Delete.
4408 (proc_handle, thread_agent, td_init_p, td_ta_new_p)
4409 (td_ta_map_id2thr_p, td_ta_map_lwp2thr_p, td_ta_thr_iter_p)
4410 (td_ta_event_addr_p, td_ta_set_event_p, td_ta_event_getmsg_p)
4411 (td_thr_validate_p, td_thr_get_info_p, td_thr_event_enable_p)
4412 (td_thr_tls_get_addr_p, td_create_bp_addr, td_death_bp_addr): No
4413 longer globals, moved to...
4414 (struct thread_db_info): ... this new structure.
4415 (thread_db_list): New.
4416 (add_thread_db_info, get_thread_db_info, delete_thread_db_info):
4418 (have_threads_callback): Filter out threads of all inferiors but
4419 the one specified by the ARGS argument.
4420 (have_threads): Add ptid argument specifying the inferior we're
4421 interested in. Handle it.
4422 (struct thread_get_info_inout): New.
4423 (thread_get_info_callback, thread_from_lwp): Adjust to use it.
4424 (thread_db_attach_lwp): Check that inferior of the passed in
4425 thread is using thread-db. Adjust.
4426 (enable_thread_event): Remove thread_agent parameter. Instead,
4427 get it from the per-inferior thread-db info.
4428 (dladdr_to_soname): Move higher up.
4429 (enable_thread_event_reporting): Adjust to use per-inferior
4431 (try_thread_db_load_1): Replace `handle' parameter by a
4432 thread_db_info parameter. Adjust to use per-inferior thread-db
4434 (try_thread_db_load): Adjust to use per-inferior thread-db info.
4435 (thread_db_load, disable_thread_event_reporting): Ditto.
4436 (check_for_thread_db): Remove conditional reporting of which
4437 libthread_db is in use.
4438 (thread_db_new_objfile): Add comment about inferior_ptid.
4439 (attach_thread): Adjust to use per-inferior thread-db info.
4440 (thread_db_detach): Adjust to use per-inferior thread-db info.
4441 Remove thread event breakpoints of the current inferior. Only
4442 unpush the thread-db target if there are no more processes using
4444 (check_event): Adjust to use per-inferior thread-db info.
4445 (thread_db_wait): Adjust to use per-inferior thread-db info. Only
4446 unpush the thread-db target if there are no more processes using
4448 (thread_db_mourn_inferior): Adjust to use per-inferior thread-db
4449 info. Mark breakpoints of the current inferior out before
4450 deleting them. Only unpush the thread-db target if there are no
4451 more processes using it.
4452 (find_new_threads_callback): Adjust to use per-inferior thread_db
4454 (thread_db_find_new_threads_1): Add new ptid argument. Adjust to
4455 use per-inferior thread-db info.
4456 (thread_db_find_new_threads): Adjust to use per-inferior thread-db
4458 (thread_db_get_thread_local_address): Adjust.
4459 (thread_db_get_ada_task_ptid): Adjust.
4460 * inf-ptrace.c (inf_ptrace_mourn_inferior): Only unpush the target
4461 if there no more processes left to debug.
4462 * thread.c (set_running, set_executing): Handle resuming all
4463 threads of a single inferior.
4464 * mi/mi-interp.c (mi_output_running_pid): New.
4465 (mi_inferior_count): New.
4466 (mi_on_resume): For backwards compatibility, if resuming all
4467 threads of an inferior, and there is only one inferior, output
4470 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
4472 * ada-lang.c (ada_find_any_type): Move check for primitive types ...
4473 (to_fixed_range_type): ... to here.
4475 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
4477 * ada-lang.c (desc_data_type): Remove, replace by ...
4478 (desc_data_target_type): ... this.
4479 (thin_data_pntr): Use desc_data_target_type instead of desc_data_type.
4480 (ada_is_array_descriptor_type): Likewise.
4481 (ada_type_of_array): Likewise.
4482 (ada_coerce_to_simple_array_type): Likewise.
4483 (ada_array_element_type): Likewise.
4485 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
4487 * ada-valprint.c (ada_val_print_1): Use val_print_string to print
4488 result of ada_vax_float_print_function inferior call.
4490 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
4492 * ada-lang.c (ada_coerce_to_simple_array_type): Reimplement to
4493 avoid creating a dummy value.
4495 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
4497 * p-valprint.c (pascal_val_print): Use extract_typed_address
4498 to extract reference value.
4500 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
4502 * doublest.c (NAN): Remove unused define.
4503 (extract_floating_by_length, deprecated_extract_floating): Remove.
4504 (store_floating_by_length, deprecated_store_floating): Remove.
4505 (extract_typed_floating): Do not call extract_floating_by_length.
4506 (store_typed_floating): Do not call store_floating_by_length.
4507 (convert_typed_floating): Remove redundant assertions.
4508 * doublest.h (deprecated_extract_floating): Remove.
4509 (deprecated_store_floating): Remove.
4510 * sh64-tdep.c (sh64_register_convert_to_raw): Call
4511 extract_typed_floating instead of deprecated_extract_floating.
4513 2009-05-18 Jon Beniston <jon@beniston.com>
4515 * MAINTAINERS: Add lm32 target.
4516 * Makefile.in: Add lm32 dependencies.
4517 * NEWS: Indicate lm32 is a new target.
4518 * configure.tgt: Add lm32 targets.
4519 * lm32-tdep.c: New file.
4521 2009-05-18 Pedro Alves <pedro@codesourcery.com>
4523 * corelow.c (core_open): Flush the register cache before doing
4524 anything with registers.
4526 2009-05-18 Pedro Alves <pedro@codesourcery.com>
4528 * inflow.h (our_process_group): Remove declaration.
4529 (inferior_process_group): Delete global variable declaration.
4530 (inferior_process_group): New function declaration.
4531 * inflow.c: Include observer.h.
4532 (inferior_ttystate, our_ttystate, tflags_inferior, tflags_ours):
4534 (struct terminal_info): New struct.
4535 (our_terminal_info): New global.
4536 (inferior_process_group): New function.
4537 (inferior_thisrun_terminal): Extend description comment.
4538 (gdb_has_a_terminal): Adjust to write to our_terminal_info fields
4540 (terminal_init_inferior_with_pgrp): Adjust to per-inferior
4542 (terminal_inferior): Ditto.
4543 (terminal_ours_1): Ditto.
4544 (inflow_new_inferior, inflow_inferior_exit): New functions.
4545 (child_terminal_info): Adjust to per-inferior terminal settings.
4546 (osig_set): New global.
4547 (set_sigint_trap): Adjust to per-inferior terminal settings. Set
4548 or clear `osig_set' accordingly.
4549 (clear_sigint_trap): Check `osig_set' to decide wheater to restore
4550 SIGINT handler, instead of checking the current inferior (which
4552 (_initialize_inflow): Attach inflow_new_inferior and
4553 inflow_inferior_exit to the "new_inferior" and "inferior_exit"
4554 notifications, respectively.
4555 * inferior.h (struct terminal_info): Forward declare.
4556 (struct inferior): Add `terminal_info' field.
4557 * inferior.c (delete_inferior_1): Notify the inferior_exit
4558 observers before removing the inferior from the lists and deleting
4560 * inf-ptrace.c (inf_ptrace_stop): `inferior_process_group' is now
4561 a function instead of a variable. Adjust.
4562 * procfs.c (procfs_stop): Ditto.
4564 2009-05-17 Pedro Alves <pedro@codesourcery.com>
4566 * infrun.c (handle_inferior_event): When handling a
4567 TARGET_WAITKIND_FORKED, detach breakpoints from the fork child
4569 * linux-nat.c (linux_child_follow_fork): Only detach breakpoints
4570 from the child if vforking.
4571 * inf-ptrace.c (inf_ptrace_follow_fork): No need to detach
4572 breakpoints from the child here.
4574 2009-05-17 Pedro Alves <pedro@codesourcery.com>
4576 * infrun.c (pending_follow): Remove execd_pathname member.
4577 (resume): No longer handle TARGET_WAITKIND_EXECD pending follow.
4578 (handle_inferior_event): When handling a TARGET_WAITKIND_EXECD
4579 event, don't copy `execd_pathname' to pending_follow, use the
4580 event copy instead. Release `execd_pathname' once done with
4583 * infrun.c (pending_follow): Remove mention of exec events.
4585 2009-05-17 Hui Zhu <teawater@gmail.com>
4587 * i386-tdep.c (i386_process_record): Make it extern.
4588 (i386_gdbarch_init): Don't call set_gdbarch_process_record
4590 * i386-tdep.h (i386_process_record): Declare.
4591 * i386-linux-tdep.c (i386_linux_init_abi): Call
4592 set_gdbarch_process_record.
4594 2009-05-17 Vladimir Prus <vladimir@codesourcery.com>
4596 Always report varobj as changed when in_scope attribute changes.
4598 * varobj.c (install_new_value): If non-NULL-ness of value
4601 2009-05-15 Paul Pluzhnikov <ppluzhnikov@google.com>
4603 * NEWS: Mention set/show libthread-db-search-path.
4604 * gdb_thread_db.h (LIBTHREAD_DB_SEARCH_PATH): New define.
4605 (LIBTHREAD_DB_SO): Moved from linux-thread-db.c
4606 * linux-thread-db.c (libthread_db_search_path): New setting.
4607 (thread_db_handle): New variable (replaces using_thread_db).
4608 (try_thread_db_load_1): New function.
4609 (try_thread_db_load, thread_db_load_search): Likewise.
4610 (dladdr_to_soname): Likewise.
4611 (thread_db_load): Iterate over possibly multiple libthread_db's.
4612 (check_for_thread_db): Attempt to load new libthread_db.
4613 (thread_db_detach, thread_db_wait): Unload libthread_db.
4614 (thread_db_mourn_inferior): Likewise.
4615 (_initialize_thread_db): Add new libthread-db-search-path option.
4616 Defer loading of libthread_db to check_for_thread_db.
4617 * solib.c (libpthread_name_p): New function.
4618 (libpthread_solib_p): Call it.
4619 * solib.h (libpthread_name_p): New prototype.
4621 2009-05-15 Pierre Muller <muller@ics.u-strasbg.fr>
4623 * MAINTAINERS: Update my email address.
4625 2009-05-14 Paul Pluzhnikov <ppluzhnikov@google.com>
4627 * breakpoint.h: Add breakpoint_re_set_objfile prototype.
4628 * breakpoint.c (create_overlay_event_breakpoint): Renamed
4629 from create_overlay_event_breakpoint_1, old
4630 create_overlay_event_breakpoint deleted.
4631 (breakpoint_re_set_objfile): Don't rescan all objfiles
4633 (breakpoint_re_set): New function.
4634 * symfile.c (new_symfile_objfile): Call breakpoint_re_set_objfile
4635 instead of breakpoint_re_set.
4636 * objfiles.c (objfile_relocate): Likewise.
4638 2009-05-14 Joel Brobecker <brobecker@adacore.com>
4640 * gdbarch.sh: Add comment documenting the target_gdbarch global.
4641 gdbarch.h does NOT need to be regenerated as the corresponding
4642 change has already been made in a previous commit.
4644 2009-05-14 Pierre Muller <muller@ics.u-strasbg.fr>
4646 Remove all i386 debug register low level macros in config nm files.
4647 (I386_DR_LOW_SET_ADDR, I386_DR_LOW_RESET_ADDR): Remove.
4648 (I386_DR_LOW_GET_STATUS, I386_DR_LOW_SET_CONTROL): Remove.
4649 (I386_USE_GENERIC_WATCHPOIINTS): Remove.
4651 * i386-nat.h: New file (adapted from config/i386/nm-i386.h).
4652 (struct i386_dr_low_type): New type.
4653 (i386_dr_low): New global variable.
4654 * i386-nat.c (TARGET_HAS_DR_LEN_8): Update macro.
4655 (i386_insert_aligned_watchpoint): Replace i386 dr low macros by
4656 i386_dr_low struct variable fields.
4657 (i386_remove_aligned_watchpoint): Likewise.
4658 (i386_stopped_data_address): Likewise.
4659 (i386_stopped_by_hwbp): Likewise.
4660 (show_debug_regs_command_added): New static variable.
4661 (add_show_debug_regs_command): New static function.
4662 (i386_use_watchpoints): Call add_show_debug_regs_command if not done.
4663 (i386_set_debug_register_length): New function.
4664 (_initialize_i386_nat): Delete.
4666 * amd64-linux-nat.c: Include "i386-nat.h".
4667 (amd64_linux_dr_set_control): Change to static.
4668 (amd64_linux_dr_get_status): Change to static.
4669 (amd64_linux_dr_set_addr,amd64_linux_dr_reset_addr): Likewise.
4670 (_initialize_amd64_linux_nat): Set i386_dr_low variable fields.
4672 * go32-nat.c: Include "i386-nat.h".
4673 (go32_set_addr): Change to static.
4674 (go32_set_dr7): Change to static. Change arg type to unisgned long.
4675 (go32_get_dr6): Change to static. Change return type to unisnged long.
4676 (init_go32_ops): Set i386_dr_low variable fields.
4677 * i386-linux-nat.c: Include "i386-nat.h".
4678 (i386_linux_dr_set_control, i386_linux_dr_get_status): Change to static.
4679 (i386_linux_dr_set_addr, i386_linux_dr_reset_addr): Idem.
4680 (_initialize_i386_linux_nat): Set i386_dr_low variable fields.
4681 * i386bsd-nat.h: Declare functions used for
4682 i386_dr_low fields in i386fbsd-nat.c.
4683 * i386fbsd-nat.c: Include "i386-nat.h".
4684 (_initialize_i386fbsd_nat): Set i386_dr_low variable fields.
4685 * windows-nat.c: Include "i386-nat.h".
4686 (cygwin_set_dr, cygwin_get_dr6, cygwin_set_dr7): Add prototypes.
4688 (cygwin_get_dr6): Change return type to unisnged long.
4689 (cygwin_set_dr7): Change arg type to unisgned long.
4690 (init_windows_ops): Set i386_dr_low function fields.
4692 * amd64-windows-nat.c (_initialize_amd64_windows_nat): Call
4693 i386_set_debug_register_length.
4694 * i386-windows-nat.c (_initialize_i386_windows_nat): Likewise.
4696 * config/i386/nm-cygwin.h: Remove all I386_* macros.
4697 * config/i386/nm-cygwin64.h: Likewise.
4698 * config/i386/nm-fbsd.h: Likewise.
4699 * config/i386/nm-linux.h: Likewise.
4700 * config/i386/nm-i386.h: Remove completely.
4701 * config/i386/nm-go32.h: Remove completely.
4702 * config/i386/nm-linux64.h: Remove completely.
4703 * config/i386/go32.mh (NAT_FILE): Remove entry.
4704 * config/i386/linux64.h (NAT_FILE): Change to config/nm-linux.h.
4706 2009-05-14 Jon Beniston <jon@beniston.com>
4708 * MAINTAINERS: Add Jon Beniston to write after approval list.
4710 2009-05-13 Paul Pluzhnikov <ppluzhnikov@google.com>
4712 * objc-lang.c (objc_objfile_data): New variable.
4713 (find_methods): Skip objfiles without Obj-C methods.
4714 (_initialize_objc_lang): New function.
4716 2009-05-13 Joel Brobecker <brobecker@adacore.com>
4718 * c-lang.c (print_wchar): Remove unnecessary cast.
4720 2009-05-12 Jim Blandy <jimb@red-bean.com>
4722 * MAINTAINERS: Remove self as m32c target maintainer.
4724 2009-05-12 Pedro Alves <pedro@codesourcery.com>
4726 * cli/cli-decode.c (deprecated_add_set_cmd): Delete.
4727 * command.h (deprecated_add_set_cmd): Delete declaration.
4728 * gnu-nat.c (_initialize_gnu_nat): Replace 'maint gnu-debug' with
4729 'set debug gnu-nat' and 'show debug gnu-nat'.
4730 * i386-nat.c (_initialize_i386_nat): Replace 'maint
4731 show-debug-registers' with 'maint set show-debug-registers' and
4732 'maint show show-debug-registers'.
4733 * mips-linux-nat.c (_initialize_mips_linux_nat): Replace 'maint
4734 show-debug-registers' with 'maint set show-debug-registers' and
4735 'maint show show-debug-registers'.
4737 2009-05-12 Joel Brobecker <brobecker@adacore.com>
4739 * c-lang.c (print_wchar): Convert w into a gdb_wchar_t before
4740 pushing it on the output obstack.
4742 2009-05-11 Joel Brobecker <brobecker@adacore.com>
4744 Fix internal error on breaking at a multi-locations caller source line.
4745 * breakpoint.c (parse_breakpoint_sals): Set EXPLICIT_PC for the `break'
4746 command with no parameters.
4748 2009-05-11 Pedro Alves <pedro@codesourcery.com>
4750 * linux-nat.c (enum sigchld_state): Delete.
4751 (linux_nat_async_events_state): Delete.
4752 (struct waitpid_result): Delete.
4753 (waitpid_queue): Delete.
4754 (queued_waitpid_1): Delete.
4755 (async_file_flush): New.
4756 (queued_waitpid, push_waitpid): Delete.
4757 (async_file_mark): New.
4758 (drain_queued_events): Delete.
4759 (my_waitpid): Remove locally queued events handling.
4760 (linux_test_for_tracefork): Upjust.
4761 (linux_child_follow_fork): Ditto.
4762 (sync_sigchld_action): Delete.
4763 (blocked_mask): Reinstate.
4764 (async_sigchld_action): Rename to...
4765 (sigchld_action): ... this.
4766 (block_child_signals): New.
4767 (restore_child_signals_mask): New.
4768 (lin_lwp_attach_lwp): Adjust.
4769 (linux_nat_create_inferior): Ditto.
4770 (linux_nat_attach): Also use lp->status in async mode.
4771 (get_pending_status): Don't use queued_waitpid.
4772 (linux_nat_detach): Don't drain locally queued events.
4773 (linux_nat_resume): Allow pending wait statuses stored lp->status
4774 in async mode. If returning early due to a pending event,
4775 re-register the event source.
4776 (stop_wait_callback): Allow pending wait statuses stored
4777 lp->status in async mode.
4778 (pipe_to_local_event_queue, local_event_queue_to_pipe): Delete.
4779 (linux_nat_wait): Rename to ...
4780 (linux_nat_wait_1): ... this. Allow pending wait statuses stored
4781 lp->status in async mode. Always add WNOHANG to the waitpid
4782 options in async mode.
4783 (linux_nat_wait): New.
4784 (kill_callback): Don't drain locally queued events.
4785 (sigchld_handler): Rewrite.
4786 (linux_nat_is_async_p, linux_nat_can_async_p): Fix comments to
4787 refer to "set target-async".
4788 (linux_nat_async_mask): If in non-stop, and re-enabling async
4789 mode, re-register the target event source in the event loop.
4790 (linux_nat_event_pipe_pop, linux_nat_event_pipe_push)
4791 (get_pending_events, async_sigchld_handler)
4792 (linux_nat_async_events): Delete.
4793 (handle_target_event): New.
4794 (linux_nat_async_file_handler): Delete.
4795 (linux_async_pipe): New.
4796 (linux_nat_async): Only re-register in the event loop if not
4797 registered yet. Always notify the event-loop once if enabling the
4799 (linux_nat_stop_lwp): Rewrite to handle pending events stored in
4800 lp->status, not in the locally queued event list.
4801 (linux_nat_stop): Don't mask out async event handling.
4802 (linux_nat_setup_async): Delete.
4803 (_initialize_linux_nat): Adjust.
4804 (lin_thread_get_thread_signals): blocked_mask is global again.
4807 2009-05-11 Pierre Muller <muller@ics.u-strasbg.fr>
4809 Unify target macros.
4811 * target.h (STOPPED_BY_WATCHPOINT): Delete, replaced by ...
4812 (target_stoppped_by_watchpoint): New macro.
4813 (HAVE_STEPPABLE_WATCHPOINT): Delete, replaced by ...
4814 (target_have_steppable_watchpoint): New macro.
4815 (HAVE_CONTINUABLE_WATCHPOINT): Delete, replace by ...
4816 (target_have_continuable_watchpoint): New macro.
4817 (TARGET_CAN_USE_HARDWARE_WATCHPOINT):Delete, replaced by ...
4818 (target_can_use_hardware_watchpoint): New macro.
4819 (TARGET_REGION_OK_FOR_HW_WATCHPOINT):Delete, replaced by ...
4820 (target_region_ok_for_hw_watchpoint): New macro.
4822 * breakpoint.c (update_watchpoint): Use new macros.
4823 (bpstat_alloc): Likewise.
4824 (create_breakpoint): Likewise.
4825 (watch_command_1): Likewise.
4826 (can_use_hardware_watchpoint): Likewise.
4827 (do_enable_breakpoint): Likewise.
4828 * infrun.c (handle_inferior_event): Adapt to new macros.
4829 * mips-tdep.c (mips_gdbarch_init): Update comments.
4830 * procfs.c (procfs_set_watchpoint): Update comment.
4831 (procfs_insert_watchpoint): Adapt to new macros.
4832 * remote-m32r-sdi.c (m32r_stop):
4833 * remote-mips.c (mips_remove_breakpoint):
4834 * target.c (debug_to_region_ok_for_hw_watchpoint): Update to new macros.
4835 (debug_to_stopped_by_watchpoint): Likewise.
4838 2009-05-10 Pierre Muller <muller@ics.u-strasbg.fr>
4840 * src/gdb/target.h: Remove all tests for already defined
4841 macros. All macros defined here should not be set in config
4844 2009-05-08 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
4846 * ppc-linux-nat.c (have_ptrace_getsetregs): New variable.
4847 (have_ptrace_getsetfpregs): Likewise.
4848 fetch_all_gp_regs): New function.
4849 (fetch_gp_regs): New function.
4850 (fetch_all_fp_regs): Likewise.
4851 (fetch_fp_regs): New function.
4852 (fetch_ppc_registers): Using the new methods to fetch general-
4853 purpose and floating-pointer registers.
4854 (store_all_gp_regs): New function.
4855 (store_gp_regs): Likewise.
4856 (store_all_fp_regs): New function.
4857 (store_fp_regs): Likewise.
4858 (store_ppc_registers): Using the new methods to store general-
4859 purpose and floating-pointer registers.
4861 2009-05-08 Doug Evans <dje@google.com>
4863 * linux-nat.c (linux_xfer_siginfo): Delete unused locals lp, n.
4865 2009-05-07 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
4867 * MAINTAINERS (Write After Approval): Add self.
4869 2009-05-07 Joel Brobecker <brobecker@adacore.com>
4871 * gdbarch.h (target_gdbarch): Add comment documenting this global.
4873 2009-05-06 Joel Brobecker <brobecker@adacore.com>
4875 * acinclude.m4 (AM_ICONV): Prefer in-tree libiconv if present over
4877 * configure: Regenerate.
4879 2009-05-06 Joel Brobecker <brobecker@adacore.com>
4881 * utils.c: Add include of gdb_usleep.h.
4882 (defaulted_query): Detect false EOF conditions that happen
4883 on terminals opened with the O_NONBLOCK flag when there is
4886 2009-05-06 Pedro Alves <pedro@codesourcery.com>
4888 * inferior.c (add_inferior): Move observer_notify_new_inferior
4890 (add_inferior_silent): ... here.
4892 2009-05-06 Pierre Muller <muller@ics.u-strasbg.fr>
4893 Pedro Alves <pedro@codesourcery.com>
4895 * procfs.c (procfs_insert_watchpoint, procfs_remove_watchpoint)
4896 (procfs_region_ok_for_hw_watchpoint, procfs_use_watchpoints): New
4898 (procfs_stopped_by_watchpoint): Made static, ptid argument
4900 (_initialize_procfs): Register new watchpoint related target
4902 * config/i386/nm-i386sol2.h (TARGET_CAN_USE_HARDWARE_WATCHPOINT)
4903 (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT, STOPPED_BY_WATCHPOINT)
4904 (HAVE_CONTINUABLE_WATCHPOINT): Delete.
4905 (target_insert_watchpoint, target_remove_watchpoint): Delete.
4906 (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete
4908 * config/mips/nm-irix5.h (STOPPED_BY_WATCHPOINT)
4909 (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT): Delete.
4910 (target_insert_watchpoint, target_remove_watchpoint): Delete.
4911 (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete
4913 * config/sparc/nm-sol2.h (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT)
4914 (HAVE_CONTINUABLE_WATCHPOINT, STOPPED_BY_WATCHPOINT): Delete.
4915 (target_insert_watchpoint, target_remove_watchpoint): Delete.
4916 (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete
4919 2009-05-06 Hui Zhu <teawater@gmail.com>
4921 * i386-tdep.c (i386_process_record): Change bzero to memset.
4923 2009-05-06 Hui Zhu <teawater@gmail.com>
4925 * NEWS: Add item for process record and replay.
4927 2009-05-05 Maxim Grigoriev <maxim2405@gmail.com>
4929 * xtensa-tdep.c (xtensa_frame_cache): Use pc instead of cache->pc.
4931 2009-05-05 Ulrich Weigand <uweigand@de.ibm.com>
4933 * inferior.h (read_pc, write_pc): Remove.
4934 * regcache.c (read_pc, write_pc): Remove.
4936 * infrun.c (displaced_step_fixup): Use regcache_read_pc instead
4938 (handle_inferior_event): Use regcache_read_pc instead of read_pc
4939 when determining value of stop_pc. Replace subsequent uses of
4940 read_pc by inspecting already-retrieved stop_pc value.
4941 (keep_going): Use regcache_read_pc instead of read_pc.
4943 * breakpoint.c (watchpoint_check): Use current frame architecture
4944 and PC instead of current_gdbarch and read_pc ().
4945 * tracepoint.c (set_traceframe_context): Replace PC argument
4946 with FRAME argument.
4947 (trace_start_command, finish_tfind_command): Update calls.
4948 (finish_tfind_command): Compare frame IDs to identify transitions
4950 (trace_find_pc_command): Use regcache_read_pc instead of read_pc.
4951 * rs6000-nat.c (exec_one_dummy_insn): Pass in regcache instead
4952 of gdbarch. Use regcache_read_pc and regcache_write_pc instead
4953 of read_pc and write_pc.
4954 (store_register): Make regcache argument non-const. Update call
4955 to exec_one_dummy_insn.
4957 * thread.c (switch_to_thread): Use regcache_read_pc instead of read_pc.
4958 * infcmd.c (post_create_inferior): Likewise.
4959 * solib-darwin.c (darwin_solib_create_inferior_hook): Likewise.
4960 * solib-pa64.c (pa64_solib_create_inferior_hook): Likewise.
4961 * solib-sunos.c (sunos_solib_create_inferior_hook): Likewise.
4962 * solib-svr4.c (enable_break, svr4_relocate_main_executable): Likewise.
4963 * linux-fork.c (fork_load_infrun_state): Likewise.
4964 * hppa-hpux-tdep.c (hppa_hpux_push_dummy_code): Likewise.
4965 * record.c (record_wait): Likewise.
4966 * procfs.c (procfs_wait): Likewise.
4967 * remote-mips.c (common_open, mips_wait): Likewise.
4968 * remote-m32r-sdi.c (m32r_resume): Likewise.
4970 * symfile.c (generic_load): Use regcache_write_pc instead of write_pc.
4971 * monitor.c (monitor_create_inferior, monitor_load): Likewise.
4972 * m32r-rom.c (m32r_load, m32r_upload_command): Likewise.
4973 * remote-m32r-sdi.c (m32r_create_inferior, m32r_load): Likewise.
4974 * remote-mips.c (mips_create_inferior, mips_load): Likewise.
4976 * solib-darwin.c: Include "regcache.h".
4977 * solib-pa64.c: Include "regcache.h".
4978 * solib-svr4.c: Include "regcache.h.".
4980 * symfile.c: Do not mention read_pc or write_pc in comments.
4981 * dink32-rom.c: Likewise.
4982 * m32r-rom.c: Likewise.
4983 * mips-tdep.c: Likewise.
4985 2009-05-05 Ulrich Weigand <uweigand@de.ibm.com>
4987 * fork-child.c (startup_inferior): Move setting stop_pc ...
4988 * infcmd.c (post_create_inferior): ... to here.
4990 2009-05-04 Michael Snyder <msnyder@vmware.com>
4992 * NEWS: Add item for reverse debugging commands.
4994 2009-05-04 Pedro Alves <pedro@codesourcery.com>
4996 * go32-nat.c (go32_stop): Delete.
4997 (go32_kill_inferior): Rewrite to only call go32_mourn_inferior.
4998 (go32_create_inferior): Don't call go32_stop or
5000 (go32_mourn_inferior): Inline go32_stop and go32_kill_inferior
5002 (init_go32_ops): Don't register go32_stop.
5004 2009-05-02 Eli Zaretskii <eliz@gnu.org>
5006 * dbxread.c (read_dbx_symtab): Avoid compiler warnings for
5009 * infcall.c (find_function_addr): Avoid compiler warnings for
5012 2009-05-01 Jan Kratochvil <jan.kratochvil@redhat.com>
5014 * dictionary.c (dict_hashed_vector, dict_hashed_expandable_vector)
5015 (dict_linear_vector, dict_linear_expandable_vector): Fix a comment typo.
5017 2009-05-01 Doug Evans <dje@google.com>
5019 * linux-thread-db.c (thread_db_pid_to_str): Delete unused assignment
5022 2009-05-01 Eli Zaretskii <eliz@gnu.org>
5024 * record.c (_initialize_record): Reformat and clarify doc strings
5025 for stop-at-limit and insn-number-max.
5027 * go32-nat.c: Add comments about dirty secrets of DJGPP debugging.
5029 2009-05-01 Jan Kratochvil <jan.kratochvil@redhat.com>
5031 Make specifiable the make_function_type type memory ownership.
5032 * gdbtypes.c (make_function_type): New parameter `objfile', use it
5033 explicitely instead of TYPE-initialized removed local variable
5034 `objfile'. Describe `objfile' it in the function comment.
5035 (lookup_function_type): Update make_function_type callers.
5036 * gdbtypes.h (make_function_type): Update the prototype.
5037 * jv-lang.c (java_link_class_type): Update make_function_type callers.
5038 * dwarf2read.c (read_subroutine_type): Likewise.
5039 * stabsread.c (read_type): Likewise.
5041 2009-05-01 Eli Zaretskii <eliz@gnu.org>
5043 * go32-nat.c (go32_pid_to_str): Call normal_pid_to_str instead of
5044 printing a bogus "Thread <main>".
5045 (go32_thread_alive): Don't return 1 for null_ptid.
5047 * i386-tdep.c (i386_go32_init_abi): Override the number of
5048 registers due to non-support of SSE.
5050 2009-04-30 Anthony Green <green@moxielogic.com>
5052 * configure.tgt: Link the moxie simulator in with gdb.
5054 2009-04-30 Paul Pluzhnikov <ppluzhnikov@google.com>
5056 * elfread.c (elf_symtab_read): Don't assume .data and .rodata
5059 2009-04-30 Hui Zhu <teawater@gmail.com>
5060 Michael Snyder <msnyder@vmware.com>
5062 I386 Linux process record and replay support.
5064 * i386-linux-tdep.c (i386_linux_record_tdep): New variable.
5065 This struct has the argument for the function
5066 "record_linux_system_call".
5067 (i386_linux_intx80_sysenter_record): New function. Parse the
5068 system call instruction and call function
5069 "record_linux_system_call" to record execute log.
5070 (i386_linux_init_abi): Initialize "i386_linux_record_tdep".
5071 Set "i386_linux_intx80_sysenter_record" to
5072 "i386_intx80_record" and "i386_sysenter_record".
5074 2009-04-30 Hui Zhu <teawater@gmail.com>
5075 Michael Snyder <msnyder@vmware.com>
5077 I386 architecture process record and replay support.
5079 * i386-tdep.c (PREFIX_REPZ, PREFIX_REPNZ, PREFIX_LOCK,
5080 PREFIX_DATA, PREFIX_ADDR): New macros. Help decode the i386
5082 (aflag, dflag, override, modrm, mod, reg, rm, ot,
5083 i386_record_pc): New variables. Ditto.
5084 (i386_record_modrm, i386_record_lea_modrm_addr,
5085 i386_record_lea_modrm): New functions. Ditto.
5086 (i386_process_record): New function. Parse the instruction in
5087 address "addr" and record the values of registers and memory
5088 that will be changed by this instruction.
5089 (i386_gdbarch_init): Set "i386_process_record" to GDBARCH
5090 "process_record" interface.
5091 * i386-tdep.h (gdbarch_tdep): New function pointers
5092 "i386_intx80_record" and "i386_sysenter_record" that point to
5093 the function that can record "intx80" and "sysenter" execute
5096 2009-04-30 Hui Zhu <teawater@gmail.com>
5097 Michael Snyder <msnyder@vmware.com>
5099 * infrun.c (use_displaced_stepping): Return false if process
5100 record and replay target is used.
5101 (proceed): Call function "record_not_record_set" if pocess
5102 record and replay target is used.
5104 2009-04-30 Hui Zhu <teawater@gmail.com>
5105 Michael Snyder <msnyder@vmware.com>
5107 Linux process record and replay support.
5109 * Makefile.in (ALLDEPFILES): Add linux-record.c.
5110 (ALL_TARGET_OBS): Add linux-record.o.
5111 * configure.tgt (x86_64-*-linux*): Add linux-record.o.
5112 (i[34567]86-*-linux*): Add linux-record.o.
5113 * linux-record.c, linux-record.h: New file.
5115 2009-04-30 Hui Zhu <teawater@gmail.com>
5116 Michael Snyder <msnyder@vmware.com>
5118 Process record and replay target.
5120 * Makefile.in (SFILES): Add record.c.
5121 (COMMON_OBS): Add record.o.
5122 * record.c, record.h: New file.
5124 2009-04-30 Hui Zhu <teawater@gmail.com>
5125 Michael Snyder <msnyder@vmware.com>
5127 * target.h (strata): New stratum "record_stratum".
5129 2009-04-30 Hui Zhu <teawater@gmail.com>
5130 Michael Snyder <msnyder@vmware.com>
5132 GDBARCH interface for process record and replay.
5134 * gdbarch.sh (process_record): This interface point to the
5135 function that records the inferior execute log.
5137 2009-04-29 Doug Evans <dje@google.com>
5139 * i386-nat.c (child_post_startup_inferior): Delete, unused.
5141 2009-04-29 Pedro Alves <pedro@codesourcery.com>
5143 * breakpoint.c (print_exception_catchpoint): Access `b' directly
5144 instead of `b->loc->owner'.
5145 (print_mention_exception_catchpoint): Ditto.
5147 2009-04-29 Jan Kratochvil <jan.kratochvil@redhat.com>
5149 * macrocmd.c (info_macro_command): Print -Dname=value if LINE is zero.
5151 2009-04-27 Tom Tromey <tromey@redhat.com>
5153 * c-exp.y (yylex): Handle '[' and ']' like '(' and ')'.
5155 2009-04-27 Jerome Guitton <guitton@adacore.com>
5157 * symtab.c (append_exact_match_to_sals): New function, extracted
5158 from expand_line_sal.
5159 (expand_line_sal): Use append_exact_match_to_sals to append exact
5160 matches. If none found, append all best items.
5162 2009-04-27 Jerome Guitton <guitton@adacore.com>
5164 * main.c (captured_main): Move gdbinit lookups after gdb_init.
5166 2009-04-27 Jan Kratochvil <jan.kratochvil@redhat.com>
5169 * dwarf2read.c (unsigned_int_compar, inherit_abstract_dies): New.
5170 (read_func_scope): Call inherit_abstract_dies.
5172 2009-04-25 Eli Zaretskii <eliz@gnu.org>
5174 * Makefile.in (ALLDEPFILES): Remove duplicate entries for
5175 sparc-sol2-nat.c and sparc-sol2-tdep.c.
5177 * stack.c (_initialize_stack) <disassemble-next-line>: Doc fix.
5179 2009-04-24 Pierre Muller <muller@ics.u-strasbg.fr>
5181 ARI change: Use "/* ARI: rule */" pattern.
5182 * utils.c: Update ARI patterns.
5183 * gdb_dirent.h: Likewise.
5185 2009-04-23 Anthony Green <green@moxielogic.com>
5187 * MAINTAINERS: Add moxie target.
5188 * configure.tgt: Add moxie-*-elf target.
5189 * moxie-tdep.c: New file.
5190 * moxie-tdep.h: New file.
5192 2009-04-23 Joel Brobecker <brobecker@adacore.com>
5194 * ada-lang.c: Remove an extra empty line. No code change.
5196 2009-04-23 Jan Kratochvil <jan.kratochvil@redhat.com>
5198 Fix double free on error inserting the breakpoint instruction.
5199 * breakpoint.c (create_breakpoints): Move the
5200 update_global_location_list call to ...
5201 (break_command_really): ... here together with the second local call
5202 both unified after all the cleanups.
5204 2009-04-23 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
5205 Tom Tromey <tromey@redhat.com>
5207 * configure, config.in: Regenerate.
5208 * configure.ac: Support for relocatable GDB datadir. Use
5209 GDB_AC_WITH_DIR. Always define TARGET_SYSTEM_ROOT_RELOCATABLE.
5210 * acinclude.m4 (GDB_AC_WITH_DIR): New defun.
5211 * top.c (init_main): Add "set data-directory".
5212 * defs.h (gdb_datadir): Declare.
5213 * main.c (gdb_datadir): New global.
5214 (captured_main): Initialize gdb_datadir. Use relocate_directory.
5215 (relocate_path): New function.
5216 (relocate_directory): Likewise.
5217 (get_init_files): Use relocate_path.
5218 (README): Mention --with-gdb-datadir.
5220 2009-04-23 Joel Brobecker <brobecker@adacore.com>
5222 * ada-tasks (task_command_1): Call target_find_new_threads.
5224 2009-04-23 Joel Brobecker <brobecker@adacore.com>
5226 * stack.c (do_gdb_disassembly): Print the exception message if an
5227 error was thrown while trying to perform the disassembly.
5229 2009-04-22 Jan Kratochvil <jan.kratochvil@redhat.com>
5231 * varobj.c (free_variable): Replace free_current_contents by xfree.
5233 2009-04-22 Kazu Hirata <kazu@codesourcery.com>
5235 * arm-linux-nat.c (fetch_register, store_register): Use
5236 ARM_CPSR_GREGNUM instead of ARM_CPSR_REGNUM.
5237 * arm-linux-tdep.c (arm_linux_supply_gregset,
5238 arm_linux_collect_gregset): Likewise.
5239 * arm-linux-tdep.h (ARM_CPSR_GREGNUM): New.
5240 * arm-tdep.h (ARM_CPSR_REGNUM): Remove.
5242 2009-04-22 Hui Zhu <teawater@gmail.com>
5244 * stack.c (_initialize_stack): Set the default of
5245 disassemble-next-line to off.
5247 2009-04-21 Tom Tromey <tromey@redhat.com>
5249 * acinclude.m4: Use AS_HELP_STRING, not AC_HELP_STRING.
5250 * configure.ac: Use AS_HELP_STRING, not AC_HELP_STRING.
5252 2009-04-21 Andreas Schwab <schwab@linux-m68k.org>
5254 * configure.ac: Add quotes to not lose brackets in help text.
5255 * configure: Rebuild.
5257 2009-04-21 Andreas Schwab <schwab@linux-m68k.org>
5259 * configure.ac: Don't postprocess Makefile in config.status.
5260 Substitute GDB_NM_FILE. Don't substitute nm_h.
5261 * Makefile.in (GDB_NM_FILE): Substitute.
5262 (TAGS): Use $(GDB_NM_FILE) instead of $(NAT_FILE).
5263 * configure: Regenerate.
5264 * gnulib/Makefile.in: Regenerate.
5266 2009-04-21 Joseph Myers <joseph@codesourcery.com>
5268 * configure.ac (--with-datarootdir, --with-docdir, --with-pdfdir,
5269 --with-htmldir): New.
5270 * configure: Regenerate.
5272 2009-04-21 Tom Tromey <tromey@redhat.com>
5274 * configure: Rebuild.
5275 * configure.ac: Use lower case for start of help strings. Clean
5276 up --with-sysroot help.
5278 2009-04-21 Tom Tromey <tromey@redhat.com>
5280 * configure: Rebuild.
5281 * acinclude.m4 (AM_ICONV): Use AC_HELP_STRING.
5282 * configure.ac: Use AC_HELP_STRING. Use upper case for variables
5285 2009-04-21 Pierre Muller <muller@ics.u-strasbg.fr>
5287 ARI fix: remove "%p".
5288 * ia64-tdep.c (ia64_frame_this_id): Use host_address_to_string function.
5289 (ia64_sigtramp_frame_this_id): Ditto.
5290 (ia64_libunwind_frame_this_id): Ditto.
5291 (ia64_libunwind_sigtramp_frame_this_id): Ditto.
5292 * symmisc.c (maintenance_info_psymtabs): Ditto.
5294 2009-04-21 Joseph Myers <joseph@codesourcery.com>
5296 * configure.ac (--with-relocated-sources): New.
5297 * configure, config.in: Regenerate.
5298 * source.c (add_substitute_path_rule): Remove static.
5299 * source.h (add_substitute_path_rule): Declare.
5300 * main.c: Include "source.h".
5301 (captured_main): Add substitution rule if RELOC_SRCDIR.
5303 2009-04-21 Pierre Muller <muller@ics.u-strasbg.fr>
5305 * gnu-nat.h (proc_debug): Add missing continuation line in macro.
5307 2009-04-20 David Daney <ddaney@caviumnetworks.com>
5309 * NEWS: Mention MIPS/Linux hardware watchpoint support.
5311 2009-04-20 David Daney <ddaney@caviumnetworks.com>
5313 * mips-linux-nat.c (command.h, gdbcmd.h, gdb_assert.h): New #includes.
5314 (maint_show_dr, super_close): New variables.
5315 (super_fetch_registers, super_store_registers): Make static.
5316 (PTRACE_GET_WATCH_REGS, PTRACE_SET_WATCH_REGS, W_BIT, R_BIT, I_BIT)
5317 (W_MASK, R_MASK, I_MASK, IRW_MASK, MAX_DEBUG_REGISTER): Define.
5318 (pt_watch_style): Define new enum.
5319 (mips32_watch_regs, mips64_watch_regs, pt_watch_regs, mips_watchpoint):
5321 (watch_readback_valid, watch_readback, current_watches, watch_mirror):
5323 (get_irw_mask, get_reg_mask, get_num_valid, get_watchlo)
5324 (set_watchlo, get_watchhi, set_watchhi, mips_show_dr)
5325 (mips_linux_read_watch_registers, mips_linux_can_use_hw_breakpoint)
5326 (mips_linux_stopped_by_watchpoint, mips_linux_stopped_data_address)
5327 (type_to_irw, fill_mask, try_one_watch)
5328 (mips_linux_region_ok_for_hw_watchpoint, write_watchpoint_regs)
5329 (mips_linux_new_thread, populate_regs_from_watches)
5330 (mips_linux_insert_watchpoint, mips_linux_remove_watchpoint)
5331 (mips_linux_close): New functions.
5332 (_initialize_mips_linux_nat): Register watchpoint functions with
5333 the target_ops. Add show-debug-regs maintenance command.
5335 2009-04-20 David Daney <ddaney@caviumnetworks.com>
5337 * infrun.c (handle_inferior_event): Move gegisters_changed call down.
5339 2009-04-19 Pedro Alves <pedro@codesourcery.com>
5341 * NEWS: Mention gdbserver support for x86 Windows CE.
5343 2009-04-19 Eli Zaretskii <eliz@gnu.org>
5345 * config/djgpp/fnchange.lst: Fix typos.
5347 Set default host and target charsets in the DJGPP port.
5349 * config/djgpp/config.sed (am_cv_langinfo_codeset)
5350 (bash_cv_langinfo_codeset, ac_cv_header_nl_types_h): Set to "yes"
5351 in all configure scripts that define ac_cv_env_CPP_value.
5353 * go32-nat.c (dos_codepage, nl_langinfo): New functions.
5356 * config/djgpp/nl_types.h: New file.
5358 * config/djgpp/langinfo.h: New file.
5360 * config/i386/go32.mh (MH_CFLAGS): Add $(srcdir)/config/djgpp.
5362 2009-04-18 Carlos O'Donell <carlos@codesourcery.com>
5364 * Makefile.in (MAKEHTML): Set to makeinfo --html.
5365 (MAKEHTMLFLAGS): Set to empty.
5367 2009-04-18 Eli Zaretskii <eliz@gnu.org>
5369 * NEWS: Mention all new set/show commands added since GDB 6.8 was
5372 * go32-nat.c (go32_sysinfo): Check if the call to
5373 __dpmi_get_capabilities fills the buffer with information, and
5374 don't use the buffer if not.
5376 2009-04-17 Tom Tromey <tromey@redhat.com>
5378 * charset.c (_initialize_charset): Add special case for "646".
5380 2009-04-17 Carlos O'Donell <carlos@codesourcery.com>
5382 * configure.ac: AC_SUBST datarootdir, docdir, htmldir, pdfdir.
5383 * configure: Regenerate.
5384 * Makefile.in: Set datarootdir, docdir, htmldir, and pdfdir from
5385 configure substitutions.
5386 (FLAGS_TO_PASS): Add datarootdir, docdir, and htmldir.
5388 2009-04-17 Pierre Muller <muller@ics.u-strasbg.fr>
5390 ARI fix: Do not use %p, replace by call to host_address_to_string
5392 * darwin-nat.c (darwin_xfer_partial): Apply change.
5393 * gnu-nat.c (inf_continue, gnu_xfer_memory): Ditto.
5394 * gnu-nat.h (proc_debug): Ditto.
5395 * symmisc.c (maintenance_info_symtabs): Ditto.
5396 (maintenance_info_psymtabs): Ditto.
5397 * windows-nat.c (handle_load_dll): Ditto.
5398 (handle_unload_dll, info_w32_command, handle_exception): Ditto.
5399 * xtensa-tdep.c (xtensa_unwind_pc): Ditto.
5401 2009-04-17 Joseph Myers <joseph@codesourcery.com>
5403 * configure.tgt (i[34567]86-*-linux*): Use 64-bit configuration if
5404 --enable-64-bit-bfd.
5405 (sparc-*-linux*): Likewise.
5407 2009-04-17 Eli Zaretskii <eliz@gnu.org>
5409 * go32-nat.c (go32_sysinfo): Update list of Windows versions of
5412 2009-04-16 Pedro Alves <pedro@codesourcery.com>
5414 * remote.c (remote_query_attached): Fix pasto in packet_ok result
5417 2009-04-16 Joel Brobecker <brobecker@adacore.com>
5419 * procfs.c (solib_mappings_callback, find_memory_regions_callback):
5420 Revert the previous change. Might not be correct, actually.
5422 2009-04-16 Joel Brobecker <brobecker@adacore.com>
5424 * ada-lang.h (ada_adjust_exception_stop, ada_print_exception_stop)
5425 (ada_get_current_task, ada_print_exception_breakpoint_nontask)
5426 (ada_print_exception_breakpoint_task, ada_reset_thread_registers):
5427 Remove declaration. These are non-existent functions.
5429 2009-04-16 Joel Brobecker <brobecker@adacore.com>
5431 * procfs.c (solib_mappings_callback, find_memory_regions_callback):
5432 Fix a compilation warning on mips-irix due to casting from
5433 a pointer of different size.
5435 2009-04-16 Joel Brobecker <brobecker@adacore.com>
5437 * ada-lang.c (symtab_for_sym): Delete.
5438 (user_select_syms): Use sym->symtab instead of calling symtab_for_sym.
5440 2009-04-16 Joel Brobecker <brobecker@adacore.com>
5442 * ada-lang.c (extract_string): Delete.
5443 (ada_main_name): Reimplement using target_read_string instead of
5446 2009-04-16 Andreas Schwab <schwab@linux-m68k.org>
5448 * m68klinux-nat.c: Remove obsolete comment.
5449 (fetch_register, store_register): Don't call
5450 gdbarch_cannot_fetch_register or gdbarch_cannot_store_register,
5451 which are always nops here.
5453 2009-04-14 Tom Tromey <tromey@redhat.com>
5455 * c-lang.c (c_emit_char): Use INTERMEDIATE_ENCODING.
5456 (c_printstr): Likewise.
5457 * charset.c: Include gdb_wait.h.
5458 (make_wchar_iterator): Use INTERMEDIATE_ENCODING.
5459 (find_charset_names): Use pexecute. Handle libiconv's output.
5461 (_initialize_charset): Use xstrdup.
5462 * gdb_wchar.h: Check HAVE_BTOWC. Split PHONY_ICONV and wchar
5464 (INTERMEDIATE_ENCODING): New define.
5465 * configure, config.in: Rebuild.
5466 * configure.ac: Check for btowc.
5468 2009-04-15 Tom Tromey <tromey@redhat.com>
5470 * c-lang.c (evaluate_subexp_c): Correctly handle EVAL_SKIP.
5472 2009-04-15 Eli Zaretskii <eliz@gnu.org>
5474 * utils.c (parse_escape): Initialize target_char to pacify GCC.
5476 2009-04-14 Jan Kratochvil <jan.kratochvil@redhat.com>
5478 * c-lang.c (c_get_string): Fix xfree crash on a failed string read.
5480 2009-04-14 Pierre Muller <muller@ics.u-strasbg.fr>
5482 ARI fix: sprintf rule.
5483 * ada-exp.y (convert_char_literal): Replace sprintf by xsnprintf.
5484 * ada-lang.c (add_angle_brackets): Use xstrprintf.
5485 (ada_decode): Replace sprintf by xsnprintf.
5486 (find_old_style_renaming_symbol): Ditto.
5487 (ada_to_fixed_type_1, ada_enum_name): Ditto.
5490 2009-04-14 Joel Brobecker <brobecker@adacore.com>
5492 * target.c (target_mourn_inferior): Call bfd_cache_close_all
5493 after having executed the target mourn_inferior routine.
5495 2009-04-14 Eli Zaretskii <eliz@gnu.org>
5497 * config/djgpp/djconfig.sh (DEPDIR): Define to "_deps", if
5500 2009-04-13 David Daney <ddaney@caviumnetworks.com>
5502 * infrun.c (maybe_software_singlestep): New function.
5503 (resume): Call maybe_software_singlestep.
5504 (handle_inferior_event): Same.
5506 2009-04-13 Tom Tromey <tromey@redhat.com>
5508 * python/python-frame.c (frapy_richcompare): Return
5509 Py_NotImplemented, not an error. Handle Py_NE as well.
5511 2009-04-13 Eli Zaretskii <eliz@gnu.org>
5513 * charset.c (EILSEQ): Define if not defined by system headers.
5515 2009-04-11 Eli Zaretskii <eliz@gnu.org>
5517 * config/djgpp/config.sed: Tweak ac_config_files in intl/configure
5518 to be consistent with renaming config.intl.in into config_intl.in.
5520 * go32-nat.c (go32_attach, go32_detach): Fix prototypes to be
5521 consistent with the change from 2008-11-09.
5523 2009-04-10 Jan Kratochvil <jan.kratochvil@redhat.com>
5525 * gdbtypes.c: Remove excessive parentheses at the return keywords.
5526 * varobj.c (varobj_invalidate): Fix indentation.
5527 * varobj.c (varobj_invalidate): Fix formatting text width.
5529 2009-04-08 Vladimir Prus <vladimir@codesourcery.com>
5531 Implement -exec-jump.
5533 * mi/mi-cmds.h (mi_cmd_exec_jump): Declare.
5534 * mi/mi-main.c (mi_cmd_exec_jump): New.
5535 * mi/mi-cmds.c (mi_cmds): Register exec-jump.
5537 2009-04-07 Doug Evans <dje@google.com>
5539 * symfile.c (symbol_file_clear): Fix indentation.
5541 2009-04-06 Mark Kettenis <kettenis@gnu.org>
5543 * sparc64nbsd-nat.c (sparc64nbsd_supply_pcb): Fix comment.
5545 2009-04-03 Ulrich Weigand <uweigand@de.ibm.com>
5547 * ppc-linux-nat.c (ppc_linux_target_wordsize): New function.
5548 (ppc_linux_auxv_parse): New function.
5549 (ppc_linux_read_description): Use ppc_linux_target_wordsize.
5550 (_initialize_ppc_linux_nat): Install ppc_linux_auxv_parse.
5552 2009-04-03 Ulrich Weigand <uweigand@de.ibm.com>
5554 * spu-linux-nat.c (spu_bfd_open): Set filename of in-memory
5555 BFD to contents of SPU name note.
5556 (spu_symbol_file_add_from_memory): Call symbol_file_add_from_bfd
5557 with "from_tty" argument 1 instead of 0.
5559 2009-04-02 Jan Kratochvil <jan.kratochvil@redhat.com>
5562 (new_symbol <DW_TAG_variable> <!DW_AT_location> <DW_AT_external>):
5563 Create the symbol in local scope.
5564 * symtab.h (cu->list_in_scope <LOC_UNRESOLVED>): New comment part.
5566 2009-04-02 Keith Seitz <keiths@redhat.com>
5568 * stabsread.c (read_member_functions): GCC may emit an extra space
5569 at the end of the names "__base_ctor" and "__base_dtor"; so ignore
5570 whitespace when looking for these functions.
5572 2009-04-01 Joel Brobecker <brobecker@adacore.com>
5574 Change the default value for "set print frame-arguments" to scalars.
5576 * stack.c (print_frame_arguments): Set initial value to "scalars".
5578 2009-04-01 Aleksandar Ristovski <aristovski@qnx.com>
5580 * mips-tdep.c (mips_numeric_register_alieses): New definition.
5581 (mips_gdbarch_init): Add user registers from
5582 mips_numeric_register_aliases.
5584 2009-04-01 Joel Brobecker <brobecker@adacore.com>
5586 * linux-nat.c (linux_nat_filter_event): Minor comment reformatting.
5588 2009-04-01 Joel Brobecker <brobecker@adacore.com>
5590 * linux-nat.c (linux_nat_filter_events): Do not delete the lwp if
5591 this is the last one.
5593 2009-04-01 Pedro Alves <pedro@codesourcery.com>
5595 * remote.c (append_resumption): New.
5596 (remote_vcont_resume): Use it.
5598 2009-04-01 Joel Brobecker <brobecker@adacore.com>
5600 * windows-nat.c (+windows_get_ada_task_ptid): New function.
5601 (init_windows_ops): Set windows_ops.to_get_ada_task_ptid.
5603 2009-03-31 Daniel Jacobowitz <dan@codesourcery.com>
5604 Keith Seitz <keiths@redhat.com>
5605 Jan Kratochvil <jan.kratochvil@redhat.com>
5608 * Makefile.in (dbxread.o): Update.
5609 * dbxread.c (read_dbx_symtab): Use cp_canonicalize_string.
5610 * dwarf2read.c (GDB_FORM_cached_string): New.
5611 (read_partial_die): Use dwarf2_canonicalize_name.
5612 (dwarf2_linkage_name): Use dwarf2_name.
5613 (dwarf2_canonicalize_name): New.
5614 (dwarf2_name): Use dwarf2_canonicalize_name.
5615 (dwarf_form_name, dump_die): Handle GDB_FORM_cached_string.
5616 * stabsread.c (define_symbol, read_type): Use cp_canonicalize_string.
5617 * symtab.c (lookup_symbol_in_language): Canonicalize input before
5619 * cp-name-parser.y: operator() requires two parameters,
5620 according to libiberty.
5621 * minsyms.c (lookup_minimal_symbol): Canonicalize input
5625 2009-03-31 Joel Brobecker <brobecker@adacore.com>
5627 Provide support for (Ada) task-specific breakpoints.
5629 * ada-lang.h (ada_get_task_number): Add declaration.
5630 (breakpoint_ada_task_match): Delete declaration.
5631 * ada-tasks.c (ada_get_task_number): Make non-static.
5632 * breakpoint.h (struct breakpoint): Add field "task".
5633 * breakpoint.c (print_one_breakpoint_location): Add handling of
5634 task-specific breakpoints.
5635 (create_breakpoint, create_breakpoints, find_condition_and_thread):
5636 New parameter "task".
5637 (break_command_really): Update calls to find_condition_and_thread
5638 and create_breakpoints.
5639 (breakpoint_re_set_one): Update call to find_condition_and_thread.
5642 2009-03-31 Joel Brobecker <brobecker@adacore.com>
5644 * ada-tasks.c (short_task_info): Eliminate the "Running" task state.
5646 2009-03-31 Pedro Alves <pedro@codesourcery.com>
5648 * remote.c (remote_notice_new_inferior): Use ptid_is_pid. Check
5649 if the thread's ptid without a thread id field is in the list
5650 before calling thread_change_ptid.
5651 (extended_remote_attach_1): In non-stop mode, do not rely on
5652 querying the current thread, instead, query the thread list, and
5653 select the first thread of the process.
5654 * gdbthread.h (first_thread_of_process): Declare.
5655 * thread.c (first_thread_of_process): Define.
5657 2009-03-30 Stan Shebs <stan@codesourcery.com>
5659 Make tracepoints into a type of breakpoint.
5660 * breakpoint.h (enum bptype): Add bp_tracepoint.
5661 (struct breakpoint): Add fields step_count, pass_count, actions.
5662 (get_tracepoint, get_tracepoint_by_number): Declare.
5663 (all_tracepoints): Declare.
5664 * breakpoint.c: Include tracepoint.h, readline.h.
5665 (ALL_TRACEPOINTS): Move here from tracepoint.c.
5666 (tracepoint_count): Ditto.
5667 (should_be_inserted): GDB does not insert tracepoints itself.
5668 (print_it_typical): Add tracepoint case.
5669 (bpstat_what): Ditto.
5670 (print_one_breakpoint_location): Ditto, and add printing for
5671 pass count, step count, and action list.
5672 (user_settable_breakpoint): Add tracepoint case.
5673 (allocate_bp_location): Ditto.
5674 (set_breakpoint_location_function): Ditto.
5675 (disable_breakpoints_in_shlibs): Ditto.
5677 (break_command_really): Add argument traceflag, use to choose
5678 basic breakpoint type.
5679 (break_command_1): Pass extra argument.
5680 (set_breakpoint, handle_gnu_v3_exceptions): Ditto.
5681 (breakpoint_re_set_one): Add tracepoint case.
5682 (disable_command, enable_command): Ditto.
5683 (set_tracepoint_count): Move here from tracepoint.c.
5684 (trace_command): Move here from tracepoint.c and use
5685 break_command_really.
5686 (tracepoints_info): Move here from tracepoint.c and call
5688 (enable_trace_command): Move here from tracepoint.c and call
5690 (disable_trace_command): Move here from tracepoint.c and call
5692 (delete_trace_command): Move here from tracepoint.c and call
5694 (trace_pass_command): Move here from tracepoint.c.
5695 (get_tracepoint_by_number): Ditto.
5696 (tracepoint_save_command): Ditto.
5697 (get_tracepoint): New function.
5698 (all_tracepoints): New function.
5699 (_initialize_breakpoint): Move tracepoint init from tracepoint.c,
5700 deprecate "enable trace" and "disable trace" commands.
5701 * tracepoint.h (struct tracepoint): Remove.
5702 (tracepoint_chain): Remove decl.
5703 (deprecated_create_tracepoint_hook): Remove decl.
5704 (deprecated_delete_tracepoint_hook): Remove decl.
5705 (deprecated_modify_tracepoint_hook): Remove decl.
5706 (ALL_TRACEPOINTS, ALL_TRACEPOINTS_SAFE): Remove.
5707 (free_actions): Update signature.
5708 (validate_actionline): Update signature.
5709 (end_actions_pseudocommand): Declare.
5710 (while_stepping_pseudocommand): Declare.
5711 * tracepoint.c: Include breakpoint.h.
5712 (tracepoint_chain, tracepoint_count): Remove.
5713 (free_actions, make_cleanup_free_actions): Update signature.
5714 (trace_command, set_raw_tracepoint): Remove.
5715 (trace_mention): Remove.
5716 (tracepoints_info): Remove.
5717 (tracepoint_operation, map_args_over_tracepoints): Remove.
5718 (get_tracepoint_by_number): Remove.
5719 (enable_trace_command, disable_trace_command): Remove.
5720 (delete_trace_command, trace_pass_command): Remove.
5721 (trace_actions_command, read_actions): Update signature.
5722 (validate_actionline): Update signature, use bp loc.
5723 (encode_actions): Ditto.
5724 (download_tracepoint): New function, body of trace_start_command.
5725 (trace_start_command): Call it, use all_tracepoints.
5726 (tracepoint_save_command): Remove.
5727 (tracepoint_dump_command): Use get_tracepoint.
5728 (end_actions_pseudocommand): Make globally visible.
5729 (while_stepping_pseudocommand): Ditto.
5730 (_initialize_tracepoint): Move command definitions to breakpoint.c.
5732 2009-03-30 Thiago Jung Bauermann <bauerman@br.ibm.com>
5734 Expose frames to Python.
5735 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-frame.o.
5736 (SUBDIR_PYTHON_SRCS): Add python-frame.c.
5737 (python-frame.o): New target.
5738 * python/python-frame.c: New file.
5739 * python/python-internal.h (gdbpy_frames, gdbpy_newest_frame,
5740 gdbpy_frame_stop_reason_string, gdbpy_selected_frame,
5741 gdbpy_initialize_frames): New prototypes.
5742 * python/python.c (_initialize_python): Call gdbpy_initialize_frames.
5743 (GdbMethods): Add `selected_frame' and `frame_stop_reason_string'
5745 * stack.c (find_frame_funname): New function, factored out of
5747 (print_frame): Call find_frame_funname.
5748 * stack.h (find_frame_funname): Add prototype.
5750 2009-03-29 Thiago Jung Bauermann <bauerman@br.ibm.com>
5752 Remove unused value_object attribute `owned_by_gdb'.
5753 * python/python-value.c (value_object): Remove owned_by_gdb
5755 (valpy_dealloc): Remove reference to self->owned_by_gdb.
5756 (valpy_new): Likewise.
5757 (value_to_value_object): Likewise.
5759 2009-03-29 Thiago Jung Bauermann <bauerman@br.ibm.com>
5761 Change gdb.Value.address from a method to an attribute.
5762 * python/python-value.c (value_object): Add `address' element.
5763 (valpy_dealloc): Decrement reference to self->address if set.
5764 (valpy_new): Initialize val_obj->address.
5765 (valpy_address): Rename to ...
5766 (valpy_get_address): ... this. Change signature from method to
5767 attribute. Update self->address if not set.
5768 (value_to_value_object): Initialize val_obj->address.
5769 (value_object_getset): Add `address' element.
5770 (value_object_methods): Remove `address' element.
5772 2009-03-29 Andreas Schwab <schwab@linux-m68k.org>
5774 * observer.sh: Set LANG/LC_ALL to C, not c.
5776 2009-03-28 Kevin Buettner <kevinb@redhat.com>
5778 * mn10300-tdep.c (mn10300_gdbarch_init): For mn10300, by default,
5781 2009-03-28 Pedro Alves <pedro@codesourcery.com>
5783 * remote.c (remote_stop_ns): If multi-process extensions are off,
5784 and GDB is requesting the whole process to stop, sent "vCont;t",
5787 2009-03-28 Pedro Alves <pedro@codesourcery.com>
5789 * inf-loop.c (inferior_event_handler): Avoid calling is_running on
5792 2009-03-27 Eli Zaretskii <eliz@gnu.org>
5794 * config/djgpp/fnchange.lst: Update to fix ARI-reported problems.
5796 2009-03-26 Doug Evans <dje@google.com>
5798 * thread.c (do_restore_current_thread_cleanup): Redo test for
5799 whether to restore old->inferior_ptid.
5801 2009-03-26 Tom Tromey <tromey@redhat.com>
5803 * breakpoint.c (resolve_sal_pc): Preserve original line number
5804 when skipping prologue.
5806 2009-03-26 Doug Evans <dje@google.com>
5808 * thread.c (inferior_thread) Remove "extern" in definition.
5810 2009-03-26 Thiago Jung Bauermann <bauerman@br.ibm.com>
5812 Add gdb.Value.is_optimized_out attribute.
5813 * python/python-value.c (valpy_get_is_optimized_out): New
5815 (value_object_getset): New variable.
5816 (value_object_type): Initialize tp_getset element.
5818 2009-03-26 Joel Brobecker <brobecker@adacore.com>
5820 Recognize missing DW_AT_location as <value optimized out>.
5822 (new_symbol <DW_TAG_variable> <!DW_AT_location> <!DW_AT_external>):
5823 Call add_symbol_to_list.
5825 2009-03-25 Tom Tromey <tromey@redhat.com>
5827 * gdbtypes.h (CHECK_TYPEDEF): Don't yield a value.
5828 * stack.c (print_this_frame_argument_p): Use check_typedef.
5830 2009-03-25 Tom Tromey <tromey@redhat.com>
5832 * configure: Rebuild.
5833 * acinclude.m4 (AM_ICONV): Set am_cv_use_build_libiconv.
5834 Rearrange flags setting. Add comments.
5836 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
5838 * config/i386/nm-i386.h: Remove code within
5839 I386_WATCHPOINTS_IN_TARGET_VECTOR conditional.
5840 * config/i386/nm-cygwin.h: Remove I386_WATCHPOINTS_IN_TARGET_VECTOR
5842 * config/i386/nm-cygwin64.h: Ditto.
5843 * config/i386/nm-fbsd.h: Ditto.
5844 * config/i386/nm-go32.h: Ditto.
5845 * config/i386/nm-linux.h: Ditto.
5846 * config/i386/nm-linux64.h: Ditto.
5848 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
5850 ARI fix: "xasprintf" rule.
5851 * printcmd.c (sym_info): Replace xasprintf by xstrprintf.
5853 2009-03-25 Pedro Alves <pedro@codesourcery.com>
5855 * remote.c (remote_start_remote): In non-stop mode, call
5856 init_wait_for_inferior before adding threads and inferiors.
5858 2009-03-25 Joel Brobecker <brobecker@adacore.com>
5860 * breakpoint.c (breakpoint_thread_match): Split a large condition
5861 into several smaller conditions. No behavior change.
5863 2009-03-25 Pedro Alves <pedro@codesourcery.com>
5865 * infrun.c (infrun_thread_thread_exit): New.
5866 (_initialize_infrun): Attach it to the thread_exit observer.
5867 * thread.c (delete_thread_1): Always call the observer, passing it
5869 * mi/mi-interp.c (mi_thread_exit): Add "silent" parameter. If
5870 SILENT, return immediately.
5872 2009-03-25 Pedro Alves <pedro@codesourcery.com>
5874 * infrun.c (normal_stop): Use has_stack_frames instead of
5876 * mi/mi-main.c (mi_execute_command): Avoid calling inferior_thread
5877 when there is no thread selected.
5878 (mi_cmd_execute): Don't special case commands that can run without
5879 a valid selected thread.
5880 * top.c (execute_command): Don't special case commands that can
5881 run without a valid selected thread. Use has_stack_frames.
5882 * infcmd.c (ensure_valid_thread): New.
5883 (continue_1, step_1, jump_command, signal_command): Use it.
5884 (detach_command): Error out if there's no selected thread/inferior.
5885 * thread.c (print_thread_info): Allow having no thread selected.
5886 (switch_to_thread): Don't read the PC if there is no current thread.
5887 (do_restore_current_thread_cleanup): Don't record the current
5888 frame if there is no current thread.
5889 (make_cleanup_restore_current_thread): Don't read frame info if
5890 there is no selected thread.
5891 (_initialize_thread): Don't mark commands as
5892 "no_selected_thread_ok".
5893 * frame.c (get_current_frame): Error out if there is no valid
5895 (has_stack_frames): Return false if there is no valid
5897 * cli/cli-cmds.c (init_cli_cmds): Don't mark commands as
5898 "no_selected_thread_ok".
5899 * cli/cli-decode.c (set_cmd_no_selected_thread_ok)
5900 (get_cmd_no_selected_thread_ok): Delete.
5901 * cli/cli-decode.h (CMD_NO_SELECTED_THREAD_OK): Delete.
5902 (set_cmd_no_selected_thread_ok, get_cmd_no_selected_thread_ok):
5904 * stack.c (get_selected_block): Use has_stack_frames.
5906 2009-03-25 Thiago Jung Bauermann <bauerman@br.ibm.com>
5908 Fix size of FPSCR in Power 7 processors.
5909 * ppc-linux-nat.c (PPC_FEATURE_ARCH_2_05): Remove #define.
5910 (PPC_FEATURE_HAS_DFP): New #define.
5911 (ppc_linux_read_description): Check for DFP feature instead of
5912 ISA 2.05 to decide on size of the FPSCR.
5914 2009-03-25 Kevin Buettner <kevinb@redhat.com>
5916 * mn10300-tdep.c (trad-frame.h): Don't include.
5917 (prologue-value.h): Include.
5918 (mn10300_frame_unwind_cache, set_reg_offsets): Delete.
5919 (struct mn10300_prologue): Define.
5920 (push_reg, translate_rreg, check_for_saved): New functions.
5921 (mn10300_analyze_prologue): Rewrite, using prologue-value
5922 machinery. Handle more instructions than before. Permit
5923 instructions to occur in any order.
5924 (mn10300_skip_prologue): Find the extents of the function
5925 in question; mn10300_analyze_prologue no longer does this.
5926 (mn10300_analyze_frame_prologue): New function.
5927 (mn10300_frame_base): New function.
5928 (mn10300_frame_this_id): Rewrite, no longer using trad-frame
5930 (mn10300_frame_prev_register): Likewise.
5931 (mn10300_frame_base_address, mn10300_frame_base struct): Delete.
5932 (mn10300_unwind_pc, mn10300_unwind_sp): Rename `next_frame' to
5934 (mn10300_frame_unwind_init): Don't call frame_base_set_default().
5936 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
5938 Fix completer problem for filename completion on the first try.
5940 * gdb/completer.h (gdb_completion_word_break_characters): New function.
5941 * gdb/completer.c: Include gdb_assert.h.
5942 (complete_line_internal_reason): New enum.
5943 (complete_line_internal): Change last argument type to
5944 complete_line_internal_reason.
5945 Modify function to handle the different complete_line_internal_reason
5947 (complete_line): Adapt to change in complete_line_internal.
5948 (command_completer): Ditto.
5949 (gdb_completion_word_break_characters): Implement new function.
5950 * top.c (init_main): Set rl_completion_word_break_hook to
5951 gdb_completion_word_break_characters.
5954 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
5956 ARI fix: "strlen d_name" rule.
5957 * linux-nat.c (linux_nat_xfer_osdata): Use NAMELEN macro.
5960 2009-03-24 Tom Tromey <tromey@redhat.com>
5961 Pedro Alves <pedro@codesourcery.com>
5963 * configure, config.in: Rebuild.
5964 * configure.ac: Check for libiconvlist.
5965 * charset.c: Check HAVE_LIBICONVLIST.
5966 * acinclude.m4 (AM_ICONV): Don't subst LIBICONV, LIBICONV_INCLUDE,
5967 LIBICONV_LIBDIR. Update CPPFLAGS and LIBS.
5968 * Makefile.in (LIBICONV, LIBICONV_INCLUDE, LIBICONV_LIBDIR):
5970 (INTERNAL_CFLAGS_BASE): Update.
5971 (INTERNAL_LDFLAGS): Update.
5974 2009-03-24 Jan Kratochvil <jan.kratochvil@redhat.com>
5976 * configure.ac: Initialize the variable $PREFER_CURSES.
5977 * configure: Regenerated.
5979 2009-03-24 Jan Kratochvil <jan.kratochvil@redhat.com>
5981 * configure.ac: Enable $PREFER_CURSES even with default $ENABLE_TUI.
5982 * configure: Regenerated.
5984 2009-03-24 Pierre Muller <muller@ics.u-strasbg.fr>
5986 ARI fix: "strerror" rule.
5987 * darwin-nat.c (darwin_ptrace): Use safe_strerror.
5988 (darwin_stop_inferior, darwin_attach, darwin_detach): Ditto.
5990 2009-03-23 Joel Brobecker <brobecker@adacore.com>
5992 * ada-exp.y (get_symbol_field_type): Make sure to resolve typedefs
5993 before looking up the fields inside our struct type.
5995 2009-03-23 Joel Brobecker <brobecker@adacore.com>
5997 * ada-lang.c (resolve_subexp) [UNOP_QUAL]: Resolve typedefs before
5998 trying to resolve the type qualification.
6000 2009-03-23 Joel Brobecker <brobecker@adacore.com>
6002 * ada-lang.c (ada_evaluate_subexp) [UNOP_IN_RANGE]: make sure
6003 we try to apply the attribute on the real type, rather than
6004 its associated typedef.
6006 2009-03-23 Joel Brobecker <brobecker@adacore.com>
6008 * ada-lang.c (ada_evaluate_subexp) [OP_ATR_MODULUS]: Use check_typdef
6009 to make sure we try to get the modulus of the actual type, not the
6012 2009-03-23 Joel Brobecker <brobecker@adacore.com>
6014 * ada-lang.c (ada_evaluate_subexp): [OP_ATR_FIRST, OP_ATR_LAST]
6015 [OP_ATR_LENGTH]: When using the attribute on a type, make sure
6016 to get the real type, not the associated typedef.
6018 2009-03-23 Joel Brobecker <brobecker@adacore.com>
6020 * ada-lang.c (ada_get_field_index): Add handling of the case
6021 when TYPE is a typedef of a struct.
6023 2009-03-23 Joel Brobecker <brobecker@adacore.com>
6025 Add gdb_usleep as a portable version of usleep based on gdb_select.
6026 * gdb_usleep.h, gdb_usleep.c: New files.
6027 * Makefile.in (SFILES): Add gdb_usleep.c.
6028 (HFILES_NO_SRCDIR): Add gdb_usleep.h.
6029 (COMMON_OBS): Add gdb_usleep.o.
6030 * ser-unix.c (hardwire_send_break): Replace call to gdb_select
6031 by call to gdb_usleep.
6033 2009-03-23 Joel Brobecker <brobecker@adacore.com>
6035 * buildsym.c (end_symtab): If we ignore the subfiles, then
6036 unlink the associated symtabs if they were already allocated.
6038 2009-03-23 Jerome Guitton <guitton@adacore.com>
6040 Provide a way to force building of GDB with libcurses.
6041 * configure.ac: Add --with-curses.
6042 * configure: Regenerated.
6044 2009-03-23 Tom Tromey <tromey@redhat.com>
6046 * dwarf2expr.c (execute_stack_op) <DW_OP_GNU_uninit>: Fix typo in
6049 2009-03-23 Paul Pluzhnikov <ppluzhnikov@google.com>
6051 * breakpoint.c (disable_breakpoints_in_unloaded_shlib): Use
6052 solib_contains_address_p instead of searching.
6054 2009-03-23 Tom Tromey <tromey@redhat.com>
6056 * charset.c (ICONV_CONST) <PHONY_ICONV>: Define.
6057 (iconv): Make 'inbuf' argument const.
6058 (convert_between_encodings): Use ICONV_CONST.
6059 (wchar_iterate): Likewise.
6061 2009-03-22 Christopher Faylor <me+cygwin@cgf.cx>
6063 * windows-nat.c (AdjustTokenPrivileges): Implement macro wraparound for
6064 dynamically loaded function.
6065 (LookupPrivilegeValueA): Ditto.
6066 (OpenProcessToken): Ditto.
6067 (AdjustTokenPrivileges): Rename and define placeholder for address of
6068 dynamically loaded function.
6069 (LookupPrivilegeValueA): Ditto.
6070 (OpenProcessToken): Ditto.
6071 (set_process_privilege): Remove check for loaded functions.
6072 (bad_OpenProcessToken): Define.
6073 (_initialize_loadable): Load token functions from advapi here, setting
6074 OpenProcessToken function to a dummy static function which always return
6075 error if OS doesn't support this functionality.
6077 2009-03-22 Nicolas Roche <roche@adacore.com>
6078 Christopher Faylor <me+cygwin@cgf.cx>
6080 * win32-nat.c (ctrl_c_handler): New function.
6081 (win32_wait): Register ctrl_c_handler as Ctrl-C handler if the inferior
6082 is run in a separate console.
6084 2009-03-22 Christopher Faylor <me+cygwin@cgf.cx>
6086 * windows-nat.c (DebugActiveProcessStop): Implement macro wraparound
6087 for dynamically loaded function.
6088 (DebugBreakProcess): Ditto.
6089 (DebugSetProcessKillOnExit): Ditto.
6090 (EnumProcessModules): Ditto.
6091 (GetModuleFileNameExA): Ditto.
6092 (GetModuleInformation): Ditto.
6093 (DebugActiveProcessStop): Rename and define placeholder for address of
6094 dynamically loaded function.
6095 (DebugBreakProcess): Ditto.
6096 (DebugSetProcessKillOnExit): Ditto.
6097 (EnumProcessModules): Ditto.
6098 (GetModuleFileNameExA): Ditto.
6099 (GetModuleInformation): Ditto.
6100 (psapi_loaded): Delete.
6101 (get_module_name): Don't check psapi_loaded, just rely on the fact that
6102 dynamically loaded functions will return failure if they weren't
6104 (has_detach_ability): Delete.
6105 (windows_attach): Remove call to has_detach_ability (). Just rely on
6106 functions being callable.
6107 (bad_DebugActiveProcessStop): Define.
6108 (bad_DebugBreakProcess): Ditto.
6109 (bad_DebugSetProcessKillOnExit): Ditto.
6110 (bad_EnumProcessModules): Ditto.
6111 (bad_GetModuleFileNameExA): Ditto.
6112 (bad_GetModuleInformation): Ditto.
6113 (_initialize_loadable): Rename from _initialize_psapi. Initialize all
6114 dynamic storage here, setting nonexistent functions to dummy static
6115 functions which always return error.
6117 2009-03-22 Pedro Alves <pedro@codesourcery.com>
6119 * mi/mi-interp.c (mi_interpreter_init): Attach mi_about_to_proceed
6120 to the about_to_proceed observer notification.
6121 (mi_about_to_proceed): New.
6122 (mi_on_resume): Only output ^running and the prompt here if the
6123 target was proceeded.
6124 * breakpoint.c (breakpoint_proceeded): New static.
6125 (breakpoint_about_to_proceed): New.
6126 (_initialize_breakpoints): Attach breakpoint_about_to_proceed to
6127 the about_to_proceed observer notification.
6128 * inferior.h (breakpoint_proceeded): Delete declaration.
6129 * infrun.c (clear_proceed_status): Don't set breakpoint_proceeded.
6130 Notify the about_to_proceed observers.
6131 (struct inferior_status): Delete breakpoint_proceeded member.
6132 (save_inferior_status): Don't save it.
6133 (restore_inferior_status): Don't restore it.
6134 * mi-main.h (mi_proceeded): Declare.
6135 * mi/mi-main.c (mi_cmd_execute): Clear mi_proceeded before running
6138 2009-03-22 Pedro Alves <pedro@codesourcery.com>
6140 * gdbthread.h (struct thread_info): Add in_infcall member.
6141 * infcall.c (run_inferior_call): Save, set and restore in_infcall.
6142 Remove reverences to suppress_resume_observer. Refresh
6143 `call_thread' after returning from `proceed'.
6144 * infcmd.c (suppress_resume_observer): Delete.
6145 * inferior.h (suppress_resume_observer): Delete declaration.
6146 * mi/mi-interp.c (mi_on_resume): Suppress output while calling an
6148 * thread.c (set_running): Remove references to
6149 suppress_resume_observer.
6150 * infrun.c (struct inferior_status): Add in_infcall member.
6151 (save_inferior_status): Save it.
6152 (restore_inferior_status): Restore it.
6154 2009-03-22 Pedro Alves <pedro@codesourcery.com>
6156 * infcall.c (run_inferior_call): Remove references to
6157 suppress_stop_observer.
6158 * infcmd.c (suppress_stop_observer): Delete.
6159 (finish_command_continuation): Remove NOTE. Don't clear
6160 suppress_stop_observer anymore.
6161 (finish_command_continuation_free_arg): Likewise.
6162 (finish_forward): Remove references to suppress_stop_observer.
6163 Call normal_stop observer if we haven't already.
6164 * inferior.h (suppress_stop_observer): Delete.
6165 * infrun.c (normal_stop): When deciding to suppress the
6166 normal_stop observer, check for proceed_to_finish instead of
6167 suppress_stop_observer.
6169 2009-03-22 Pedro Alves <pedro@codesourcery.com>
6171 * symfile.c (symfile_relocate_debug_section): Remove check for
6174 2009-03-21 Jan Kratochvil <jan.kratochvil@redhat.com>
6175 Jim Blandy <jimb@red-bean.com>
6176 Thiago Jung Bauermann <bauerman@br.ibm.com>
6177 Tom Tromey <tromey@redhat.com>
6179 Miscellaneous fixes to the Python code.
6180 * python/python-cmd.c (cmdpy_init): Accept keyword
6182 * python/python-value.c (valpy_string): Accept keyword
6184 (valpy_binop): Use `break' to exit from the TRY_CATCH block.
6185 Do not call value_to_value_object on NULL RES_VAL.
6186 (value_object_methods): Change `string' entry to also accept
6188 (convert_value_from_python): Return a copy of the value if obj is
6190 (value_object_methods): Mark the `string' method as accepting
6191 keywords, and show method "prototype" in the doc string.
6192 * python/python.c (get_parameter): Don't return inside a
6195 2009-03-20 Tom Tromey <tromey@redhat.com>
6197 Add support for convenience functions in Python.
6198 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-function.o.
6199 (SUBDIR_PYTHON_SRCS): Add python-function.c.
6200 (python-function.o): New target.
6201 * eval.c: Include "python/python.h" and <ctype.h>.
6202 (evaluate_subexp_standard): Handle values of type
6203 TYPE_CODE_INTERNAL_FUNCTION.
6204 * gdbtypes.h (type_code): Add TYPE_CODE_INTERNAL_FUNCTION.
6205 * parse.c (write_exp_string): Remove duplicate word in comment.
6206 * python/python-function.c: New file.
6207 * python/python-internal.h (gdbpy_initialize_functions): Add
6209 * python/python.c (_initialize_python): Call
6210 gdbpy_initialize_functions.
6211 * valprint.c (value_check_printable): Handle values of type
6212 TYPE_CODE_INTERNAL_FUNCTION.
6213 * value.c: Include "cli/cli-decode.h".
6214 (internal_function): New struct.
6215 (functionlist, internal_fn_type): New static variables.
6216 (lookup_only_internalvar,
6217 lookup_internalvar): Add const qualifier to name argument.
6218 (create_internalvar): Likewise. Initialize new field.
6219 (set_internal_var): Fix typo in comment. Don't allow assignment
6220 to canonical variable.
6221 (value_create_internal_function, value_internal_function_name,
6222 call_internal_function, function_command, function_destroyer,
6223 add_internal_function): New functions.
6224 (_initialize_values): Create `function' placeholder command.
6225 Initialize internal_fn_type.
6226 * value.h (lookup_only_internalvar, create_internalvar,
6227 lookup_internalvar): Add const qualifier to name argument.
6228 (internal_function_fn, add_internal_function, call_internal_function,
6229 value_internal_function_name): Add prototypes.
6230 (struct internalvar) <canonical>: New field.
6232 2009-03-20 Tom Tromey <tromey@redhat.com>
6234 * c-lang.c (evaluate_subexp_c): Call check_typedef.
6236 2009-03-20 Tom Tromey <tromey@redhat.com>
6237 Julian Brown <julian@codesourcery.com>
6239 PR i18n/7220, PR i18n/7821, PR exp/8815, PR exp/9103,
6240 PR i18n/9401, PR exp/9613:
6242 * value.h (value_typed_string): Declare.
6243 (val_print_string): Update.
6244 * valprint.h (print_char_chars): Update.
6245 * valprint.c (print_char_chars): Add type argument. Update.
6246 (val_print_string): Likewise.
6247 * valops.c (value_typed_string): New function.
6248 * utils.c (host_char_to_target): New function.
6249 (parse_escape): Use host_char_to_target, host_hex_value. Update.
6251 (no_control_char_error): Remove.
6252 * typeprint.c (print_type_scalar): Update.
6253 * scm-valprint.c (scm_scmval_print): Update.
6254 * scm-lang.h (scm_printchar, scm_printstr): Update.
6255 * scm-lang.c (scm_printchar): Add type argument.
6256 (scm_printstr): Likewise.
6257 * printcmd.c (print_formatted): Update.
6258 (print_scalar_formatted): Update.
6259 (printf_command) <wide_string_arg, wide_char_arg>: New constants.
6260 Handle '%lc' and '%ls'.
6261 * parser-defs.h (struct typed_stoken): New type.
6262 (struct stoken_vector): Likewise.
6263 (write_exp_string_vector): Declare.
6264 * parse.c (write_exp_string_vector): New function.
6265 * p-valprint.c (pascal_val_print): Update.
6266 * p-lang.h (is_pascal_string_type, pascal_printchar,
6267 pascal_printstr): Update.
6268 * p-lang.c (is_pascal_string_type): Remove 'char_size' argument.
6269 Add 'char_type' argument.
6270 (pascal_emit_char): Add type argument.
6271 (pascal_printchar): Likewise.
6272 (pascal_printstr): Likewise.
6273 * objc-lang.c (objc_emit_char): Add type argument.
6274 (objc_printchar): Likewise.
6275 (objc_printstr): Likewise.
6276 * macroexp.c (get_character_constant): Handle unicode characters.
6278 (get_string_literal): Handle unicode strings. Use
6280 * m2-valprint.c (print_unpacked_pointer): Update.
6281 (m2_print_array_contents): Update.
6282 (m2_val_print): Update.
6283 * m2-lang.c (m2_emit_char): Add type argument.
6284 (m2_printchar): Likewise.
6285 (m2_printstr): Likewise.
6286 * language.h (struct language_defn) <la_printchar>: Add type
6288 <la_printstr, la_emitchar>: Likewise.
6289 (LA_PRINT_CHAR): Likewise.
6290 (LA_PRINT_STRING): Likewise.
6291 (LA_EMIT_CHAR): Likewise.
6292 * language.c (unk_lang_emit_char): Add type argument.
6293 (unk_lang_printchar): Likewise.
6294 (unk_lang_printstr): Likewise.
6295 * jv-valprint.c (java_val_print): Update.
6296 * jv-lang.c (java_emit_char): Add type argument.
6297 * f-valprint.c (f_val_print): Update.
6298 * f-lang.c (f_emit_char): Add type argument.
6299 (f_printchar): Likewise.
6300 (f_printstr): Likewise.
6301 * expprint.c (print_subexp_standard): Update.
6302 * charset.h (target_wide_charset): Declare.
6303 (c_target_char_has_backslash_escape, c_parse_backslash,
6304 host_char_print_literally, host_char_to_target,
6305 target_char_to_host, target_char_to_control_char): Remove.
6306 (enum transliterations): New type.
6307 (convert_between_encodings): Declare.
6308 (HOST_ESCAPE_CHAR): New define.
6309 (host_letter_to_control_character, host_hex_value): Declare.
6310 (enum wchar_iterate_result): New enum.
6311 (struct wchar_iterator): Declare.
6312 (make_wchar_iterator, make_cleanup_wchar_iterator, wchar_iterator,
6313 wchar_push_back): Declare.
6314 * charset-list.h: New file.
6315 * c-valprint.c (textual_name): New function.
6316 (textual_element_type): Handle wide character types.
6317 (c_val_print): Pass original type to textual_element_type. Handle
6318 wide character types.
6319 (c_value_print): Use textual_element_type. Pass original type of
6321 * c-lang.h (enum c_string_type): New type.
6322 (c_printchar, c_printstr): Update.
6323 * c-lang.c (classify_type): New function.
6324 (print_wchar): Likewise.
6325 (c_emit_char): Add type argument. Handle wide characters.
6326 (c_printchar): Likewise.
6327 (c_printstr): Add type argument. Handle wide and multibyte
6329 (convert_ucn): New function.
6330 (emit_numeric_character): Likewise.
6331 (convert_octal): Likewise.
6332 (convert_hex): Likewise.
6333 (ADVANCE): New macro.
6334 (convert_escape): New function.
6335 (parse_one_string): Likewise.
6336 (evaluate_subexp_c): Likewise.
6337 (exp_descriptor_c): New global.
6338 (c_language_defn): Use exp_descriptor_c.
6339 (cplus_language_defn): Likewise.
6340 (asm_language_defn): Likewise.
6341 (minimal_language_defn): Likewise.
6342 (charset_for_string_type): New function.
6343 * c-exp.y (%union): Add 'svec' and 'tsval'.
6345 (exp): Add CHAR production.
6346 (string_exp): Rewrite.
6347 (exp) <string_exp>: Rewrite.
6348 (tempbuf): Now global.
6349 (tempbuf_init): New global.
6350 (parse_string_or_char): New function.
6351 (yylex) <tempbuf>: Now global.
6352 <tokptr, tempbufindex, tempbufsize, token_string, class_prefix>:
6354 Handle 'u', 'U', and 'L' prefixes. Call parse_string_or_char.
6355 (c_parse_escape): New function.
6356 * auxv.c (fprint_target_auxv): Update.
6357 * ada-valprint.c (ada_emit_char): Add type argument.
6358 (ada_printchar): Likewise.
6359 (ada_print_scalar): Update.
6360 (printstr): Add type argument. Update calls to ada_emit_char.
6361 (ada_printstr): Add type argument.
6362 (ada_val_print_array): Update.
6363 (ada_val_print_1): Likewise.
6364 * ada-lang.c (emit_char): Add type argument.
6365 * ada-lang.h (ada_emit_char, ada_printchar, ada_printstr): Add
6367 * gdb_locale.h: Include langinfo.h.
6368 * charset.c (_initialize_charset): Set default host charset from
6369 the locale. Don't register charsets. Add target-wide-charset
6370 commands. Call find_charset_names.
6371 (struct charset, struct translation): Remove.
6372 (GDB_DEFAULT_HOST_CHARSET): Remove.
6373 (GDB_DEFAULT_TARGET_WIDE_CHARSET): New define.
6374 (target_wide_charset_name): New global.
6375 (show_host_charset_name): Handle "auto".
6376 (show_target_wide_charset_name): New function.
6377 (host_charset_enum, target_charset_enum): Remove.
6378 (charset_enum): New global.
6379 (all_charsets, register_charset, lookup_charset, all_translations,
6380 register_translation, lookup_translation): Remove.
6381 (simple_charset, ascii_print_literally, ascii_to_control): Remove.
6382 (iso_8859_print_literally, iso_8859_to_control,
6383 iso_8859_family_charset): Remove.
6384 (ebcdic_print_literally, ebcdic_to_control,
6385 ebcdic_family_charset): Remove.
6386 (struct cached_iconv, check_iconv_cache, cached_iconv_convert,
6387 register_iconv_charsets): Remove.
6388 (target_wide_charset_be_name, target_wide_charset_le_name): New
6390 (identity_either_char_to_other): Remove.
6391 (set_be_le_names, validate): New functions.
6392 (backslashable, backslashed, represented): Remove.
6393 (default_c_target_char_has_backslash_escape): Remove.
6394 (default_c_parse_backslash, iconv_convert): Remove.
6395 (ascii_to_iso_8859_1_table, ascii_to_ebcdic_us_table,
6396 ascii_to_ibm1047_table, iso_8859_1_to_ascii_table,
6397 iso_8859_1_to_ebcdic_us_table, iso_8859_1_to_ibm1047_table,
6398 ebcdic_us_to_ascii_table, ebcdic_us_to_iso_8859_1_table,
6399 ebcdic_us_to_ibm1047_table, ibm1047_to_ascii_table,
6400 ibm1047_to_iso_8859_1_table, ibm1047_to_ebcdic_us_table): Remove.
6401 (table_convert_char, table_translation, simple_table_translation):
6403 (current_host_charset, current_target_charset,
6404 c_target_char_has_backslash_escape_func,
6405 c_target_char_has_backslash_escape_baton): Remove.
6406 (c_parse_backslash_func, c_parse_backslash_baton): Remove.
6407 (host_char_to_target_func, host_char_to_target_baton): Remove.
6408 (target_char_to_host_func, target_char_to_host_baton): Remove.
6409 (cached_iconv_host_to_target, cached_iconv_target_to_host):
6411 (lookup_charset_or_error, check_valid_host_charset): Remove.
6412 (set_host_and_target_charsets): Remove.
6413 (set_host_charset, set_target_charset): Remove.
6414 (set_host_charset_sfunc, set_target_charset_sfunc): Rewrite.
6415 (set_target_wide_charset_sfunc): New function.
6416 (show_charset): Print target wide character set.
6417 (host_charset, target_charset): Rewrite.
6418 (target_wide_charset): New function.
6419 (c_target_char_has_backslash_escape): Remove.
6420 (c_parse_backslash): Remove.
6421 (host_letter_to_control_character): New function.
6422 (host_char_print_literally): Remove.
6423 (host_hex_value): New function.
6424 (target_char_to_control_char): Remove.
6425 (cleanup_iconv): New function.
6426 (convert_between_encodings): New function.
6427 (target_char_to_host): Remove.
6428 (struct wchar_iterator): Define.
6429 (make_wchar_iterator, make_cleanup_wchar_iterator, wchar_iterator,
6430 wchar_push_back): New functions.
6431 (do_cleanup_iterator): New function.
6432 (char_ptr): New typedef.
6433 (charsets): New global.
6434 (add_one, find_charset_names): New functions.
6435 (default_charset_names): New global.
6436 (auto_host_charset_name): Likewise.
6437 * aclocal.m4, config.in, configure: Rebuild.
6438 * configure.ac: Call AM_LANGINFO_CODESET.
6439 (GDB_DEFAULT_HOST_CHARSET): Default to UTF-8.
6440 (AM_ICONV): Invoke earlier.
6441 * acinclude.m4: Include codeset.m4. Subst LIBICONV_INCLUDE and
6442 LIBICONV_LIBDIR. Check for libiconv in build tree.
6443 * Makefile.in (LIBICONV_LIBDIR, LIBICONV_INCLUDE): New macros.
6444 (INTERNAL_CFLAGS_BASE): Add LIBICONV_INCLUDE.
6445 (INTERNAL_LDFLAGS): Add LIBICONV_LIBDIR.
6446 * gdb_obstack.h (obstack_grow_wstr): New define.
6447 * gdb_wchar.h: New file.
6448 * defs.h: Include it.
6450 2009-03-20 Tom Tromey <tromey@redhat.com>
6451 Jan Kratochvil <jan.kratochvil@redhat.com>
6453 * dwarf2read.c (process_die): Handle DW_TAG_typedef.
6454 * eval.c (evaluate_subexp_standard) <OP_TYPE>: Strip a single
6456 * ada-lang.c (decode_packed_array_type): Call CHECK_TYPEDEF on the
6458 * ada-typeprint.c (print_array_type): Do the NULL check
6461 2009-03-19 Tom Tromey <tromey@redhat.com>
6463 * utils.c (do_obstack_free): New function.
6464 (make_cleanup_obstack_free): Likewise.
6465 * defs.h (make_cleanup_obstack_free): Declare.
6467 2009-03-18 Doug Evans <dje@google.com>
6469 * linux-nat.c (linux_nat_find_memory_regions): Result of PIDGET is an
6470 int, not a long long.
6471 (linux_nat_info_proc_cmd): Store pid in long instead of long long.
6473 * expprint.c (dump_raw_expression): Print note if non-NULL.
6475 * printcmd.c (display_uses_solib_p): Redo loop, scan element list
6478 2009-03-18 Nathan Sidwell <nathan@codesourcery.com>
6480 * Makefile.in: Update license to GPLv3.
6481 * ada-exp.y: Update license to GPLv3.
6482 * ada-lex.l: Update license to GPLv3.
6483 * c-exp.y: Update license to GPLv3.
6484 * cp-name-parser.y: Update license to GPLv3.
6485 * darwin-nat-info.c: Update license to GPLv3.
6486 * f-exp.y: Update license to GPLv3.
6487 * gdb_thread_db.h: Update license to GPLv3.
6488 * hppanbsd-nat.c: Update license to GPLv3.
6489 * hppanbsd-tdep.c: Update license to GPLv3.
6490 * hppaobsd-tdep.c: Update license to GPLv3.
6491 * jv-exp.y: Update license to GPLv3.
6492 * m2-exp.y: Update license to GPLv3.
6493 * objc-exp.y: Update license to GPLv3.
6494 * p-exp.y: Update license to GPLv3.
6495 * reply_mig_hack.awk: Update license to GPLv3.
6496 * reverse.c: Update license to GPLv3.
6497 * xtensa-xtregs.c: Update license to GPLv3.
6499 2009-03-18 Pedro Alves <pedro@codesourcery.com>
6501 * remote.c (remote_close): Don't call generic_mourn_inferior.
6502 (remote_mourn_1): Call generic_mourn_inferior after closing the
6505 2009-03-18 Pedro Alves <pedro@codesourcery.com>
6507 * remote.c (remote_start_remote): Add missing call to
6508 init_wait_for_inferior in non-stop mode.
6510 2009-03-18 Pedro Alves <pedro@codesourcery.com>
6512 * breakpoint.c (bpstat_should_step): Only consider software
6513 watchpoints that have a location.
6515 2009-03-17 Joel Brobecker <brobecker@adacore.com>
6517 Add a target_ops parameter to the to_kill method in struct target_ops.
6519 * target.h (struct target_ops): Add a "target_ops *" parameter to
6521 (target_kill): Remove macro. Add declaration.
6522 * target.c (debug_to_kill): Delete, no longer necessary.
6523 (target_kill): New function.
6524 (update_current_target): Stop inheriting the to_kill method.
6525 Do not de_fault it to no_process either.
6526 (setup_target_debug): Do not set current_target.to_kill.
6527 * gnu-nat.c, go32-nat.c, hpux-thread.c, inf-ptrace.c, inf-ttrace.c,
6528 linux-nat.c, monitor.c, nto-procfs.c, procfs.c, remote-m32r-sdi.c,
6529 remote-mips.c, remote-sim.c, remote.c, windows-nat.c: Update
6532 2009-03-17 Doug Evans <dje@google.com>
6534 * amd64-linux-nat.c (si_timerid,si_overrun): Provide definition for
6535 glibc 2.3.2 and earlier.
6537 2009-03-17 Joel Brobecker <brobecker@adacore.com>
6539 * frame.c (get_prev_frame_1): Do not perform the inner_frame
6540 sanity check if this_frame is not NORMAL.
6541 (frame_id_inner): Update the description of this function.
6543 2009-03-17 Hui Zhu <teawater@gmail.com>
6545 * stack.c: Change the introduce of "disassemble-next-line".
6547 2009-03-17 Pedro Alves <pedro@codesourcery.com>
6549 * mi/mi-main.h (mi_print_timing_maybe): Add strict prototype,
6552 2009-03-17 Hui Zhu <teawater@gmail.com>
6554 * stack.c: Include valprint.h.
6555 (disassemble_next_line): New enum.
6556 (show_disassemble_next_line): New function. Show the current
6557 value of disassemble-next-line.
6558 (gdb_disassembly_stub_args): New struct for argument passing
6559 between function do_gdb_disassembly and function
6560 gdb_disassembly_stub.
6561 (gdb_disassembly_stub): New function. Helper for
6563 (do_gdb_disassembly): New function. Use TRY_CATCH to catch
6564 the exception from the gdb_disassembly because it will be
6565 broken by filter sometime.
6566 (print_frame_info): If disassemble-next-line is set to auto
6567 or on and doesn't have the line debug messages for $pc,
6568 output the next instruction.
6569 If disassemble-next-line is set to on and there is line debug
6570 messages, output assembly codes for next line.
6571 (_initialize_stack): Make the "set disassemble-next-line"
6572 command an auto-boolean command. Change its class to
6573 class_stack. Place it in the top level set list. Extend help
6574 to describe the auto mode.
6576 2009-03-17 Pedro Alves <pedro@codesourcery.com>
6578 * infrun.c (normal_stop): Don't overwrite old_chain.
6580 2009-03-16 Joel Brobecker <brobecker@adacore.com>
6582 * remote-mips.c (mips_load): Replace call to regcache_set_valid_p,
6583 which is undefined, by call to regcache_invalidate, which should
6584 do what the original author wanted to do.
6586 2009-03-16 Joel Brobecker <brobecker@adacore.com>
6588 * remote-mips.c (mips_mourn_inferior): Add missing ops parameter.
6589 (mips_create_inferior): Likewise.
6591 2009-03-16 Joel Brobecker <brobecker@adacore.com>
6593 * go32-nat.c (go32_create_inferior): Add missing ops parameter.
6595 2009-03-16 Joel Brobecker <brobecker@adacore.com>
6597 * darwin-nat.c (darwin_resume): Fix a compiler warning when
6598 building on x86_64-darwin.
6600 2009-03-16 Tristan Gingold <gingold@adacore.com>
6602 * configure.tgt: Add handling for x86_64-darwin.
6604 2009-03-16 Jan Kratochvil <jan.kratochvil@redhat.com>
6606 * auxv.c (fprint_target_auxv): New TAG for AT_RANDOM.
6608 2009-03-15 Joel Brobecker <brobecker@adacore.com>
6610 * aix-thread.c (aix_thread_thread_alive, aix_thread_pid_to_str):
6611 Use the ops parameter to get to the target beneath, rather than
6612 using the current_target global. Using the current_target global
6613 was an unintended accident.
6615 2009-03-15 Joel Brobecker <brobecker@adacore.com>
6617 Fix an error happening while loading symbols from a core file
6620 * rs6000-nat.c (xcoff_relocate_symtab): Use target_has_execution
6621 to detect whether we're debugging a core file or not.
6623 2009-03-15 Joel Brobecker <brobecker@adacore.com>
6625 Modernize the aix-thread later by getting rid of the base_target
6626 global. This brings back to life the AIX port which was otherwise
6627 crashing all the time.
6629 * aix-thread.c (base_target): Delete.
6630 (pd_enable): Do not set base_target.
6631 (aix_thread_attach): Use find_target_beneath instead of base_target.
6632 (aix_thread_detach, aix_thread_resume, aix_thread_wait)
6633 (aix_thread_fetch_registers, aix_thread_store_registers),
6634 (aix_thread_xfer_partial, aix_thread_mourn_inferior)
6635 (aix_thread_thread_alive, aix_thread_pid_to_str): Likewise.
6636 (aix_thread_kill): Delete. Does not seem necessary.
6637 (init_aix_thread_ops): Do not set aix_thread_ops.to_kill.
6639 2009-03-15 Jan Kratochvil <jan.kratochvil@redhat.com>
6641 * stack.c (return_command <retval_exp>): New variables retval_expr
6642 and old_chain. Inline parse_and_eval to initialize retval_expr. Check
6643 RETVAL_EXPR for UNOP_CAST and set RETURN_TYPE to the RETURN_VALUE type
6644 if RETURN_TYPE is NULL.
6646 2009-03-14 Pedro Alves <pedro@codesourcery.com>
6648 * remote.c (PACKET_qAttached): New.
6649 (remote_query_attached): New.
6650 (remote_add_inferior): Add new `attached' argument. Handle it.
6651 (remote_notice_new_inferior, remote_start_remote): Adjust to pass
6652 -1 to remote_add_inferior in new parameter.
6653 (extended_remote_attach_1): Adjust to pass 1 to
6654 remote_add_inferior in the new parameter.
6655 (extended_remote_create_inferior_1): Adjust to pass 0 to
6656 remote_add_inferior in the new parameter.
6657 (_initialize_remote): Add "set/show remote query-attached-packet"
6660 2009-03-13 Tom Tromey <tromey@redhat.com>
6662 * symtab.c (lookup_symbol_in_language): Use a cleanup.
6664 2009-03-13 Doug Evans <dje@google.com>
6666 * exceptions.h: Clean up some comments on catch_exceptions usage.
6667 * exceptions.c: Ditto. Plus mark catch_errors as superseded by
6670 2009-02-17 Joel Brobecker <brobecker@adacore.com>
6672 The following patch helps getting rid of a warning inside solib-som.c.
6674 * source.c (source_full_path_of): Constify parameter filename.
6675 * defs.h (source_full_path_of): Update declaration accordingly.
6677 2009-03-12 Joel Brobecker <brobecker@adacore.com>
6679 * ada-lang.c (ada_evaluate_subexp): Merge case BINOP_REM and
6680 BINOP_MOD cases with the handling of case BINOP_DIV and BINOP_MUL.
6681 Remove useless op value checks when EVAL_AVOID_SIDE_EFFECTS.
6683 2009-03-12 Joel Brobecker <brobecker@adacore.com>
6685 * ada-lang.c (ada_evaluate_subexp) <BINOP_DIV>: make sure to
6686 promote the operands when noside is EVAL_AVOID_SIDE_EFFECTS.
6688 2009-03-12 Joel Brobecker <brobecker@adacore.com>
6690 * ada-tasks.c (ada_task_is_alive): Move up and make static.
6691 * ada-lang.h (ada_task_is_alive): Remove declaration.
6693 2009-03-12 Jerome Guitton <guitton@adacore.com>
6695 * ada-lang.c (ada_delta): Change the type of numerators and
6696 denominators to DOUBLEST, as they may not fit into a long.
6697 (scaling_factor): Ditto.
6699 2009-03-12 Jerome Guitton <guitton@adacore.com>
6701 * language.c (lang_bool_type): Set lai->bool_type_symbol to NULL.
6703 2009-03-12 Joel Brobecker <brobecker@adacore.com>
6705 * ada-lang.c (ada_evaluate_subexp) [OP_VAR_VALUE]: For tagged
6706 types, if we are unable to determine the actual symbol type
6707 from its tag, then use the static approximation instead.
6709 2009-03-12 Joel Brobecker <brobecker@adacore.com>
6711 Fix crash printing packed record with packed array.
6713 * ada-lang.c (ada_modulus_from_name): New function.
6714 (ada_modulus): In the case where the type length is bigger than
6715 the size of the type used to hold the bounds, try determining
6716 the modulus from the type name.
6717 (ada_value_primitive_packed_val): Fix bug in the computation of
6718 ntarg causing an out-of-buffer invalid access.
6720 2009-03-12 Joel Brobecker <brobecker@adacore.com>
6722 Fix segfault when printing short_integer'last.
6724 * ada-lang.c (ada_find_any_type): Search in the primitive types
6725 if a symbol could not be found.
6727 2009-03-12 Joel Brobecker <brobecker@adacore.com>
6729 * ada-tasks.c (task_states,long_task_states): Add new states
6730 Activating and Acceptor_Delay_Sleep. Update the description
6731 of state Acceptor_Sleep.
6733 2009-03-12 Jonas Maebe <jonas.maebe@elis.ugent.be> (obvious change)
6735 Fix a build failure on Darwin following some changes in
6736 the profile of some target_ops methods.
6738 * darwin-nat.c (darwin_kill_inferior): Add target_ops parameter
6740 (darwin_stop_inferior, darwin_detach): Likewise.
6742 2009-03-12 Vladimir Prus <vladimir@codesourcery.com>
6744 Include token in ^running notification for CLI commands.
6746 * mi/mi-main.c (mi_execute_command): Set current_token here.
6747 (mi_cmd_execute): Do not set current_token here.
6749 2009-03-12 Vladimir Prus <vladimir@codesourcery.com>
6753 * mi/mi-main.c (mi_print_timing_maybe): New.
6754 (captured_mi_execute_command): Simplify. Output timings to
6756 (mi_execute_async_cli_command): Do not print timings.
6757 * mi/mi-main.h (mi_print_timing_maybe): Declare.
6758 * mi/mi-interp.c (mi_on_normal_stop): Call mi_print_timing_maybe.
6760 2009-03-12 Jerome Guitton <guitton@adacore.com>
6762 * xcoffread.c (process_linenos): Check if the line in the
6763 include table refers to the main source file and, if so,
6764 add them to the main subfile.
6766 2009-03-12 Joel Brobecker <brobecker@adacore.com>
6768 Fix a build failure on AIX introduced after a change in the profile
6769 of some of the "methods" in the target_ops structure.
6770 * aix-thread.c: Add missing target_ops parameter throughout.
6772 Implement Ada task switching on AIX.
6773 * aix-thread.c (aix_thread_get_ada_task_ptid): New function.
6774 (init_aix_thread_ops): Set aix_thread_ops.to_get_ada_task_ptid.
6776 2009-03-11 Daniel Jacobowitz <dan@codesourcery.com>
6778 * breakpoint.c (bpstat_check_breakpoint_conditions): Use
6779 value_mark and value_free_to_mark.
6780 * objfiles.c (free_objfile): Call objfile_free_data before
6783 2009-03-10 Hui Zhu <teawater@gmail.com>
6785 * disasm.c (gdb_disassembly): Remove unused argument
6787 * disasm.h (gdb_disassembly): Ditto.
6788 * cli/cli-cmds.c (print_disassembly): Ditto.
6789 * mi/mi-cmd-disas.c (mi_cmd_disassemble): Ditto.
6791 2009-03-09 Paul Pluzhnikov <ppluzhnikov@google.com>
6793 * solib.c (solib_contains_address_p): New function.
6794 (solib_name_from_address): Use it.
6795 * printcmd.c (display_uses_solib_p): Use it.
6796 * solib.h (solib_contains_address_p): Declare it.
6798 2009-03-09 Jan Kratochvil <jan.kratochvil@redhat.com>
6800 * varobj.c (free_variable): Call value_free.
6802 2009-03-09 Jan Kratochvil <jan.kratochvil@redhat.com>
6805 * dwarf2read.c (dwarf_decode_macros): New variable `at_commandline'.
6806 Move the variable `macinfo_type' out of the loop. Create a new
6807 processing pass before the current one to pre-create `current_file'.
6808 New complaint on misplaced zero/non-zero definitions/includes.
6809 Skip first DW_MACINFO_start_file with `at_commandline' set.
6811 2008-03-09 Vladimir Prus <vladimir@codesourcery.com>
6813 * solib.c (reload_shared_libraries): Give
6814 inferior a chance to reset solib breakpoint.
6817 2009-03-08 Christopher Faylor <me+cygwin@cgf.cx>
6819 * windows-nat.c (dr): Redefine to use largest possible integer which
6821 (cygwin_set_dr): Avoid coercion.
6823 2009-03-08 Oswald Buddenhagen <oswald.buddenhagen@trolltech.de>
6825 * windows-nat.c (windows_create_inferior): Implement --tty handling on
6828 2009-03-06 Paul Pluzhnikov <ppluzhnikov@google.com>
6830 Rename solib_address to solib_name_from_address.
6831 * breakpoint.c (insert_bp_location, disable_breakpoints_in_shlibs)
6832 (disable_breakpoints_in_unloaded_shlib): Update.
6833 * printcmd.c (display_uses_solib_p): Likewise.
6834 * stack.c (print_frame): Likewise.
6838 2009-03-05 Paul Pluzhnikov <ppluzhnikov@google.com>
6840 * printcmd.c (do_one_display): Reparse exp_string.
6841 (display_uses_solib_p): New function.
6842 (clear_dangling_display_expressions): New function.
6843 (_initialize_printcmd): Add observer.
6844 * solib.c (no_shared_libraries): Swap order of calls to
6845 clear_solib and objfile_purge_solibs.
6847 2009-03-05 Joel Brobecker <brobecker@adacore.com>
6849 Implement the target-specific part of Ada tasking support
6852 * dec-thread.c (dec_thread_get_ada_task_ptid): New function.
6853 (init_dec_thread_ops): Set the to_get_ada_task_ptid method.
6855 2009-03-05 Joel Brobecker <brobecker@adacore.com>
6857 Get rid of the global "base_target" and use "find_target_beneath"
6858 to find the underlying target.
6859 * dec-thread.c (base_target): Delete.
6860 (enable_dec_thread): Remove assignement to base_target.
6861 (dec_thread_detach, dec_thread_wait, dec_thread_wait)
6862 (dec_thread_fetch_registers, dec_thread_store_registers)
6863 (dec_thread_mourn_inferior, dec_thread_pid_to_str):
6864 Update the function profile if necessary.
6865 Use find_target_beneath to call the same method but from
6866 the underlying target, removing the need for "base_target".
6868 * dec-thread.c (dec_thread_get_regsets, dec_thread_set_regsets):
6869 Fix a copy/paste error in a few debug traces...
6871 * solib-osf.c (init_so): Use a simpler method for computing
6872 the size of lm_info structure. This also gets rid of warning
6873 emitted by the compiler.
6875 2009-03-05 Pedro Alves <pedro@codesourcery.com>
6877 * breakpoint.c (check_duplicates_for): Skip permanent breakpoints
6878 duplicates of permanent breakpoints.
6880 2009-03-04 Pedro Alves <pedro@codesourcery.com>
6882 * inferior.h (notice_new_inferior): Declare.
6883 * infcmd.c (notice_new_inferior): New.
6884 * remote.c (remote_add_inferior, remote_add_thread): New.
6885 (notice_new_inferiors): Rename to...
6886 (remote_notice_new_inferior): ... this. Add RUNNING argument.
6887 Use remote_add_thread instead of add_thread, passing it the
6888 RUNNING argument. Add an inferior with remote_add_inferior. If
6889 we just learned about an inferior, call notice_new_inferior.
6890 (record_currthread): Adjust.
6891 (remote_threads_info): Adjust to use remote_notice_new_inferior.
6892 (remote_start_remote, extended_remote_attach_1): Use
6893 remote_add_inferior.
6894 (process_stop_reply): Adjust. Call remote_notice_new_inferior
6895 after handling expedited registers and watchpoint state.
6896 (extended_remote_create_inferior_1): Use remote_add_inferior.
6898 2009-03-04 Aleksandar Ristovski <aristovski@qnx.com>
6900 * infcmd.c (registers_info): Remove register number case.
6902 2009-03-03 Pedro Alves <pedro@codesourcery.com>
6904 * top.c (quit_target): Check for target_has_execution before
6905 killing or detaching from inferiors.
6907 2009-03-02 Joel Brobecker <brobecker@adacore.com>
6909 Remove some unused routines.
6911 * ada-lang.c (is_suppressed_name, ada_suppress_symbol_printing):
6913 * ada-lang.c (ada_task_list_iterator_ftype)
6914 (iterate_over_live_ada_tasks): Delete.
6915 * ada-tasks.c (ada_get_environment_task, iterate_over_live_ada_tasks):
6918 2009-03-01 Doug Evans <dje@google.com>
6920 * symtab.c: Remove trailing whitespace throughout the file.
6921 (expand_line_sal): Fix some typos and whitespace.
6923 * Makefile.in (clean): rm -f $(DEPDIR)/*.
6925 * Makefile.in (GDB_CFLAGS): Add -I$(srcdir)/common.
6926 (init.c): signals/ -> common/.
6927 (signals.o): Update.
6928 * target.h (target_signal_to_string,target_signal_to_string)
6929 (target_signal_from_name,target_signal_to_host_p)
6930 (target_signal_from_host,target_signal_to_host): Move to ...
6931 * common/gdb_signals.h: ... here. New file.
6932 * common/signals.c: Moved here from signals/signals.c.
6933 #include gdb_signals.h, remove #include of target.h in gdb case.
6934 (target_signal_from_command,default_target_signal_to_host)
6935 (default_target_signal_from_host): Move inside #ifndef GDBSERVER.
6937 Include thread ID in target_wait debugging output.
6938 * infrun.c (print_target_wait_results): New function.
6939 (wait_for_inferior,fetch_inferior_event): Call it.
6941 2009-02-27 Pedro Alves <pedro@codesourcery.com>
6943 * gdb_proc_service.h (struct ps_prochandle): Replace pid_t field
6944 with a ptid_t field.
6945 * linux-thread-db.c (thread_get_info_callback): Build the ptid
6946 using the pid stored in proc_handle.ptid.
6947 (thread_from_lwp, thread_db_attach_lwp, enable_thread_event)
6948 (check_for_thread_db, thread_db_detach, check_event)
6949 (thread_db_mourn_inferior, find_new_threads_callback)
6950 (thread_db_find_new_threads_1): Adjust.
6951 * proc-service.c (ps_xfer_memory, ps_lgetregs, ps_lsetregs)
6952 (ps_lgetfpregs, ps_lsetfpregs, ps_getpid): Adjust.
6954 2009-02-27 Phil Muldoon <pmuldoon@redhat.com>
6956 * valprint.c (read_string): Rework clean-up logic. Use
6957 free_current_contents to clean-up buffer.
6959 2009-02-27 Andreas Schwab <schwab@linux-m68k.org>
6961 * MAINTAINERS: Update e-mail address.
6963 2009-02-26 Phil Muldoon <pmuldoon@redhat.com>
6965 * python/python-utils.c (python_string_to_unicode): Always return
6967 (python_string_to_target_string): Decrement transient python
6969 (python_string_to_host_string): Likewise.
6971 2007-02-26 Pedro Alves <pedro@codesourcery.com>
6973 * mips-linux-nat.c (mips64_linux_fetch_registers): Pass `ops' to
6974 call to super_fetch_registers.
6975 (mips64_linux_store_registers): Pass `ops' to call to
6976 super_store_registers.
6978 2009-02-25 Doug Evans <dje@google.com>
6980 * breakpoint.c (insert_bp_location): Add \n to overlay breakpoint
6983 * breakpoint.c (disable_breakpoints_in_shlibs): Delete local
6984 disabled_shlib_breaks, unused.
6986 * printcmd.c (build_address_symbolic): Fix comment.
6988 2009-02-25 Hui Zhu <teawater@gmail.com>
6990 * cli/cli-script.c (define_command): Add _() to query.
6991 * gnu-nat.c (inf_validate_task_sc): Ditto.
6992 * infcmd.c (kill_if_already_running): Ditto.
6993 (jump_command): Ditto.
6994 (attach_command): Ditto.
6995 * inflow.c (kill_command): Ditto.
6996 * infrun.c (handle_command): Ditto.
6997 * maint.c (maintenance_dump_me): Ditto.
6998 * memattr.c (mem_delete_command): Ditto.
6999 * monitor.c (monitor_interrupt_query): Ditto.
7000 * nto-procfs.c (interrupt_query): Ditto.
7001 * printcmd.c (undisplay_command): Ditto.
7002 * remote-mips.c (mips_kill): Ditto.
7003 * remote.c (interrupt_query): Ditto.
7004 * solib-irix.c (irix_open_symbol_file_object): Ditto.
7005 * solib-osf.c (osf_open_symbol_file_object): Ditto.
7006 * solib-pa64.c (pa64_open_symbol_file_object): Ditto.
7007 * solib-som.c (som_open_symbol_file_object): Ditto.
7008 * solib-svr4.c (open_symbol_file_object): Ditto.
7009 * symfile.c (symbol_file_add_with_addrs_or_offsets): Ditto.
7010 * target.c (kill_or_be_killed): Ditto.
7011 * tracepoint.c (delete_trace_command): Ditto.
7012 * top.c (quit_confirm): Add _() to s that will be used
7015 2009-02-24 Pierre Muller <muller@ics.u-strasbg.fr>
7017 Fix windows-nat.c compilation failure.
7019 * windows-nat.c (windows_thread_alive): Fix forward declaration.
7020 (get_windows_debug_event): Add ops parameter to call to windows_resume.
7022 2009-02-23 Pedro Alves <pedro@codesourcery.com>
7024 * remote-sim.c (gdbsim_resume): Add target_ops* argument.
7026 2009-02-23 Jay Krell <jay.krell@cornell.edu> (tiny change)
7028 * symtab.c (find_line_symtab): Initialize exact to avoid
7031 2009-02-23 Pedro Alves <pedro@codesourcery.com>
7033 * i386-linux-nat.c (i386_linux_fetch_inferior_registers): Pass
7034 `ops' to recursive call.
7036 2009-02-23 Pedro Alves <pedro@codesourcery.com>
7038 * corelow.c (get_core_registers): Adjust.
7039 (core_file_thread_alive): Rename to...
7040 (core_thread_alive): ... this.
7041 (core_pid_to_str): Try gdbarch_core_pid_to_str first.
7042 (init_core_ops): Adjust.
7043 (coreops_suppress_target): Delete.
7044 (_initialize_corelow): Unconditionally add core_ops.
7045 * procfs.c: Include "inf-child.h".
7046 (procfs_ops): Delete.
7047 (init_procfs_ops): Delete. Reimplement as...
7048 (procfs_target): ... this, inheriting from inf-child.
7049 (procfs_attach, procfs_detach, procfs_fetch_registers): Adjust.
7050 (procfs_prepare_to_store): Delete.
7051 (procfs_store_registers, procfs_resume): Adjust.
7052 (procfs_open): Delete.
7053 (procfs_suppress_run): Delete.
7054 (procfs_can_run): Delete.
7055 (procfs_mourn_inferior): Adjust.
7056 (procfs_init_inferior): Add target_ops parameter. Adjust.
7057 (procfs_create_inferior): Don't pass procfs_init_inferior to
7058 fork_inferior. Instead call it after fork_inferior returns.
7059 (procfs_find_new_threads): Adjust.
7060 (_initialize_procfs): Adjust to use procfs_target instead of
7062 * sol-thread.c (orig_core_ops, sol_core_ops): Delete.
7063 (lwp_to_thread): Use target_thread_alive.
7064 (sol_thread_open): Delete.
7065 (sol_thread_attach): Delete.
7066 (sol_thread_detach, sol_thread_resume, sol_thread_wait)
7067 (sol_thread_fetch_registers, sol_thread_store_registers): Adjust
7068 to use find_target_beneath.
7069 (sol_thread_prepare_to_store, sol_thread_xfer_memory): Delete.
7070 (sol_thread_xfer_partial): Adjust to use find_target_beneath.
7071 (sol_thread_files_info, sol_thread_kill_inferior): Delete.
7072 (check_for_thread_db): New.
7073 (sol_thread_notice_signals, sol_thread_create_inferior): Delete.
7074 (sol_thread_new_objfile): Call check_for_thread_db.
7075 (sol_thread_mourn_inferior): Adjust to use find_target_beneath.
7076 (sol_thread_can_run): Delete.
7077 (sol_thread_alive): Adjust to use find_target_beneath.
7078 (sol_thread_stop): Delete.
7079 (rw_common): Use target_write_memory or target_read_memory.
7080 (ps_lgetregs, ps_lgetfpregs): Use target_fetch_registers.
7081 (ps_lsetregs, ps_lsetfpregs): Use target_store_registers.
7082 (solaris_pid_to_str): Remove check for libthread_db initialization
7084 (sol_find_new_threads): Remove check for libthread_db
7085 initialization failing, or for an invalid inferior_ptid. Adjust
7086 to use find_target_beneath.
7087 (sol_core_open, sol_core_close, sol_core_detach,
7088 sol_core_files_info, sol_find_memory_regions,
7089 sol_make_note_section, ignore): Delete.
7090 (init_sol_thread_ops): Make it a thread_stratum target. Remove
7091 unneeded callback settings.
7092 (init_sol_core_ops): Delete.
7093 (_initialize_sol_thread): No longer call init_sol_core_ops, set
7094 procfs_suppress_run, or hack with core_ops.
7096 * target.h (struct target_ops): Add a target_ops * parameter to
7097 to_resume, to_fetch_registers, to_store_registers, to_thread_alive
7098 and to_find_new_threads.
7099 (target_fetch_registers, target_store_registers)
7100 (target_thread_alive, target_find_new_threads): Redeclare as
7103 * target.c (update_current_target): Do not inherit or de_fault
7104 to_resume, to_fetch_registers, to_store_registers,
7105 to_thread_alive, to_find_new_threads.
7106 (target_resume): Adjust.
7107 (target_thread_alive, target_find_new_threads): New.
7108 (debug_to_resume, debug_to_fetch_registers): Delete.
7109 (target_fetch_registers): New.
7110 (debug_to_store_registers): Delete.
7111 (target_store_registers): New.
7112 (debug_to_thread_alive, debug_to_find_new_threads): Delete.
7113 (setup_target_debug): Adjust.
7115 * gdbcore.h (core_ops): Delete declaration.
7117 * inf-ptrace.c, linux-nat.c, remote.c, amd64-linux-nat.c,
7118 inf-child.c, linux-thread-db.c, bsd-uthread.c, inf-ttrace.c,
7119 i386-sol2-tdep.c, darwin-nat.c, gnu-nat.c, go32-nat.c,
7120 hpux-thread.c, i386-linux-nat.c, i386fbsd-nat.c, monitor.c,
7121 nto-procfs.c, remote-m32r-sdi.c, remote-mips.c, windows-nat.c,
7122 alphabsd-nat.c, amd64bsd-nat.c, arm-linux-nat.c, armnbsd-nat.c,
7123 bsd-kvm.c, hppa-hpux-nat.c, hppa-linux-nat.c, hppabsd-nat.c,
7124 hppanbsd-nat.c, i386-darwin-nat.c, i386bsd-nat.c,
7125 ia64-linux-nat.c, m32r-linux-nat.c, m68kbsd-nat.c,
7126 m68klinux-nat.c, m88kbsd-nat.c, mips-linux-nat.c,
7127 mips64obsd-nat.c, mipsnbsd-nat.c, ppc-linux-nat.c, ppcnbsd-nat.c,
7128 ppcobsd-nat.c, remote-sim.c, rs6000-nat.c, s390-nat.c,
7129 shnbsd-nat.c, sparc-nat.c, sparc-nat.h, spu-linux-nat.c,
7130 vaxbsd-nat.c, xtensa-linux-nat.c: Adjust to target_ops changes.
7132 * gdbarch.sh (core_pid_to_str): New gdbarch callback.
7133 * gdbarch.h, gdbarch.c: Regenerate.
7135 * sol2-tdep.c: Include "inferior.h".
7136 (sol2_core_pid_to_str): New.
7137 * sol2-tdep.h (sol2_core_pid_to_str): Declare.
7139 * amd64-sol2-tdep.c (amd64_sol2_init_abi): Set it.
7140 * sparc-sol2-tdep.c (sparc32_sol2_init_abi): Set it.
7141 * sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Set it.
7142 * i386-sol2-tdep.c (i386_sol2_init_abi): Set it.
7144 2009-02-22 Doug Evans <dje@google.com>
7146 * exec.c (exec_file_attach): Fix comment.
7148 2009-02-22 Pedro Alves <pedro@codesourcery.com>
7150 Silence a few -Wmissing-prototypes warnings.
7153 * alpha-linux-tdep.c (alpha_linux_regset_from_core_section): Make
7155 * alpha-osf1-tdep.c (_initialize_alpha_osf1_tdep): Declare.
7156 * amd64fbsd-tdep.c (amd64fbsd_init_abi): Make it static.
7157 * amd64nbsd-tdep.c (_initialize_amd64nbsd_ndep): Rename to ...
7158 (_initialize_amd64nbsd_tdep): ... this.
7159 * arm-linux-tdep.c (arm_linux_software_single_step): Make it static.
7160 (_initialize_arm_linux_tdep): Declare.
7161 * armbsd-tdep.c (armbsd_fpreg_offset): Make it static.
7162 * armnbsd-tdep.c (_initialize_arm_netbsd_tdep): Declare.
7163 * armobsd-tdep.c (_initialize_armobsd_tdep): Declare.
7164 * avr-tdep.c (avr_return_value): Make it static.
7165 (avr_frame_unwind_cache): Ditto.
7166 * bsd-uthread.c (bsd_uthread_inferior_created): Ditto.
7167 (bsd_uthread_solib_loaded): Ditto.
7168 (bsd_uthread_solib_unloaded): Ditto.
7169 (bsd_uthread_target): Ditto.
7170 (_initialize_bsd_uthread): Declare.
7171 * cris-tdep.c (crisv32_single_step_through_delay): Make it static.
7172 (cris_frame_unwind_cache): Ditto.
7173 * frv-tdep.c (frv_return_value): Ditto.
7174 * h8300-tdep.c (h8300_use_struct_convention): Ditto.
7175 (h8300h_use_struct_convention): Ditto.
7176 * hppa-tdep.c (hppa_sign_extend, hppa_low_hppa_sign_extend):
7178 * hppa-tdep.h (hppa_low_sign_extend, hppa_sign_extend): Delete
7180 * hppabsd-tdep.c: Include hppabsd-tdep.h.
7181 (hppabsd_find_global_pointer): Make it static.
7182 * hppabsd-tdep.h: New.
7183 * hppanbsd-tdep.c: Include hppabsd-tdep.h.
7184 (hppabsd_init_abi): Remove declaration.
7185 (_initialize_hppabsd_tdep): Remove declaration.
7186 (_initialize_hppanbsd_tdep): Declare.
7187 * hppaobsd-tdep.c: Include hppabsd-tdep.h.
7188 (hppabsd_init_abi): Delete declaration.
7189 (hppaobsd_init_abi): Make it static.
7190 * i386-nto-tdep.c (_initialize_i386nto_tdep): Declare.
7191 * i386nbsd-tdep.c (_initialize_i386nbsd_tdep): Declare.
7192 * ia64-linux-tdep.c (_initialize_ia64_linux_tdep): Declare.
7193 * ia64-tdep.c (ia64_register_reggroup_p): Make it static.
7194 * iq2000-tdep.c (_initialize_iq2000_tdep): Declare.
7195 * m32c-tdep.c (m32c_register_reggroup_p): Make it static.
7196 (m32c_analyze_prologue, m32c_virtual_frame_pointer): Ditto.
7197 (_initialize_m32c_tdep): Declare.
7198 * m32r-rom.c (_initialize_m32r_rom): Declare.
7199 * m32r-tdep.c (m32r_skip_prologue): Make it static.
7200 (m32r_return_value): Ditto.
7201 * m68hc11-tdep.c (m68hc11_frame_unwind_cache): Make it static.
7202 (m68hc11_return_value): Ditto.
7203 * m68klinux-tdep.c (_initialize_m68k_linux_tdep): Declare.
7204 * m88k-tdep.c (m88k_frame_cache): Make it static.
7205 * mep-tdep.c (mep_gdb_print_insn): Ditto.
7206 (mep_return_value): Ditto.
7207 (_initialize_mep_tdep): Declare.
7208 * mips-irix-tdep.c (_initialize_mips_irix_tdep): Declare.
7209 * mips-linux-tdep.c (supply_64bit_reg): Make it static.
7210 (mips_linux_syscall_next_pc): Ditto.
7211 (_initialize_mips_linux_tdep): Declare.
7212 * mips-tdep.c (mips_single_step_through_delay): Make it static.
7213 * mipsnbsd-tdep.c (_initialize_mipsnbsd_tdep): Declare.
7214 * mn10300-linux-tdep.c (_initialize_mn10300_linux_tdep): Declare.
7215 * mn10300-tdep.c (_initialize_mn10300_tdep): Declare.
7216 * mt-tdep.c (_initialize_mt_tdep): Declare.
7217 * nbsd-tdep.c: Include nbsd-tdep.h.
7218 * nto-tdep.c (find_load_phdr): Make it static.
7219 (_initialize_nto_tdep): Declare.
7220 * ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Make it
7222 (_initialize_ppc_linux_tdep): Declare.
7223 * remote-m32r-sdi.c (m32r_can_use_hw_watchpoint)
7224 (m32r_insert_watchpoint, m32r_remove_watchpoint)
7225 (m32r_stopped_data_address, m32r_stopped_by_watchpoint): Make
7227 * rs6000-aix-tdep.c (_initialize_rs6000_aix_tdep): Declare.
7228 * rs6000-nat.c: Include xcoffread.h.
7229 (find_toc_address): Don't extern declare get_toc_offset. Adjust
7230 to call xcoff_get_to_offset.
7231 * rs6000-tdep.c (ppc_vsx_support_p, ppc_displaced_step_fixup)
7232 (rs6000_skip_main_prologue, rs6000_in_solib_return_trampoline)
7233 (rs6000_skip_trampoline_code): Make static.
7234 * s390-tdep.c (s390_regset_from_core_section): Ditto.
7235 * sh-tdep.c (sh_register_reggroup_p): Ditto.
7236 * shnbsd-tdep.c (shnbsd_regset_from_core_section): Ditto.
7237 (_initialize_shnbsd_tdep): Declare.
7238 * solib-frv.c (displacement_from_map): Make static.
7239 (_initialize_frv_solib): Declare.
7240 * solib-irix.c (fetch_lm_info): Make static.
7241 (_initialize_irix_solib): Declare.
7242 * solib-som.c: Include solib-som.h.
7243 (som_solib_select): Line break.
7244 * sparc-tdep.c (sparc_regset_from_core_section): Make static.
7245 * sparcnbsd-tdep.c (_initialize_sparnbsd_tdep): Rename to ...
7246 (_initialize_sparcnbsd_tdep): ... this.
7247 * spu-tdep.c (spu_software_single_step): Make it static.
7248 (_initialize_spu_tdep): Declare.
7249 * vax-tdep.c (vax_frame_cache): Make it static.
7250 * xcoffread.c: Include xcoffread.h.
7251 (get_toc_offset): Rename to ...
7252 (xcoff_get_toc_offset): ... this.
7253 (_initialize_xcoffread): Declare.
7255 * xtensa-linux-tdep.c (_initialize_xtensa_linux_tdep): Declare.
7256 * xtensa-tdep.c (xtensa_skip_prologue, xtensa_derive_tdep): Make
7258 (_initialize_xtensa_tdep): Declare.
7260 2008-02-21 Pedro Alves <pedro@codesorcery.com>
7262 Silence a few -Wmissing-prototypes warnings.
7265 * amd64-nat.c: Include "amd64-nat.h".
7266 * fork-child.c (_initialize_fork_child): Ditto.
7267 * gcore.c (_initialize_gcore): Ditto.
7268 * inf-ptrace.c: Include "inf-ptrace.h".
7269 (inf_ptrace_store_registers): Make it static.
7270 * linux-nat.c (linux_nat_terminal_ours): Make it static.
7271 (_initialize_linux_nat): Declare before definition.
7272 * linux-tdep.c: Include "linux-tdep.h".
7273 * linux-thread-db.c (_initialize_thread_db): Declare before
7275 * proc-service.c (_initialize_proc_service): Ditto.
7276 * remote.c (remote_send_printf): Make it static.
7277 * solib.c: Include "solib.h".
7278 * symfile-mem.c (_initialize_symfile_mem): Declare before
7280 * ada-lang.c (ada_la_decode, ada_match_name)
7281 (ada_suppress_symbol_printing, ada_is_array_type)
7282 (ada_value_ptr_subscript, ada_array_length)
7283 (ada_to_static_fixed_value): Make them static.
7284 (_initialize_ada_language): Declare before definition.
7285 * ada-tasks.c (ada_get_task_number, ada_get_environment_task)
7286 (ada_task_list_changed, ada_new_objfile_observer): Make them
7288 (_initialize_tasks): Declare before definition.
7289 * addrmap.c (_initialize_addrmap): Declare before definition.
7290 * auxv.c (default_auxv_parse): Make it static.
7291 * bfd-target.c (target_bfd_xfer_partial, target_bfd_xclose): Make
7293 * breakpoint.c (remove_sal): Add line break.
7294 (expand_line_sal_maybe): Make it static.
7295 * cp-name-parser.y: Include "cp-support.h".
7296 * cp-valprint.c (cp_find_class_member): Make it static.
7297 * eval.c (value_f90_subarray): Ditto.
7298 * exceptions.c (print_any_exception): Ditto.
7299 * findcmd.c (_initialize_mem_search): Declare before definition.
7300 * frame.c (frame_observer_target_changed): Make it static.
7301 * gnu-v3-abi.c (gnuv3_find_method_in): Make it static.
7302 * inf-child.c: Include "inf-child.h".
7303 * inferior.h (valid_inferior_id): Rename to ...
7304 (valid_gdb_inferior_id): ... this.
7305 * infrun.c (infrun_thread_stop_requested, siginfo_make_value):
7307 * jv-lang.c (java_language_arch_info): Make it static.
7308 * m2-typeprint.c (m2_get_discrete_bounds): Ditto.
7309 * osdata.c (info_osdata_command): Make it static.
7310 * regcache.c (regcache_observer_target_changed): Make it static.
7311 * reverse.c (_initialize_reverse): Declare before definition.
7312 * stabsread.c (cleanup_undefined_types_noname)
7313 (cleanup_undefined_types_1): Make them static.
7314 * symfile.c (place_section): Make it static.
7315 * symtab.c (find_pc_sect_psymtab_closer): Make it static.
7316 * target-descriptions.c (_initialize_target_descriptions): Declare
7318 * target.c (default_get_ada_task_ptid, find_default_can_async_p)
7319 (find_default_is_async_p, find_default_supports_non_stop): Make
7321 (target_supports_non_stop): Add prototype.
7322 (dummy_pid_to_str): Make it static.
7323 * utils.c (_initialize_utils): Declare before definition.
7324 * ada-exp.y (_initialize_ada_exp): Declare before definition.
7325 * solib-svr4.c (HAS_LM_DYNAMIC_FROM_LINK_MAP): Add a prototype.
7326 * target.h (struct target_ops): Add a prototype to the
7327 to_can_execute_reverse callback.
7328 * macroscope.c (_initialize_macroscope): Declare before definition.
7329 * cp-namespace.c (_initialize_cp_namespace): Declare before definition.
7330 * python/python.c (_initialize_python): Declare before definition.
7331 * tui/tui-command.c: Include "tui/tui-command.h".
7332 * tui/tui-data.c (init_content_element, init_win_info): Make them
7334 * tui/tui-disasm.c: Include "tui/tui-disasm.h".
7335 * tui/tui-interp.c (_initialize_tui_interp): Declare before
7337 * tui/tui-layout.c: Include "tui/tui-layout.h".
7338 (_initialize_tui_layout): Declare before definition.
7339 * tui/tui-regs.c: Include "tui/tui-regs.h".
7340 (tui_display_reg_element_at_line): Make it static.
7341 (_initialize_tui_regs): Declare before definition.
7342 * tui/tui-stack.c (_initialize_tui_stack): Declare before
7344 * tui/tui-win.c: Include "tui/tui-win.h".
7345 (_initialize_tui_win): Declare before definition.
7346 (tui_sigwinch_handler): Make it static. Wrap in ifdef SIGWINCH.
7347 * tui/tui-win.h (tui_sigwinch_handler): Delete declaration.
7348 (tui_get_cmd_list): Add a prototype.
7349 * tui/tui-windata.c: Include tui-windata.h.
7350 * tui/tui-wingeneral.c (box_win): Make it static.
7351 * cli/cli-logging.c (show_logging_command): Make it static.
7352 (_initialize_cli_logging): Declare before definition.
7353 * mi/mi-common.c (_initialize_gdb_mi_common): Declare before
7356 2009-02-20 Pierre Muller <muller@ics.u-strasbg.fr>
7358 Extend use of i386_use_watchpoints to all i386 native files
7359 using hardware watchpoints.
7360 * go32-nat.c (init_go32_ops): Call i386_use_watchpoints.
7361 * i386fbsd-nat.c (_initialize_i386fbsd_nat): Ditto.
7362 * windows-nat.c (init_windows_ops): Ditto.
7363 * config/i386/nm-cygwin.h: Define I386_WATCHPOINTS_IN_TARGET_VECTOR.
7364 * config/i386/nm-cygwin64.h: Ditto.
7365 * config/i386/nm-fbsd.h: Ditto.
7366 * config/i386/nm-go32.h: Ditto.
7368 2009-02-19 Joel Brobecker <brobecker@adacore.com>
7370 * ada-typeprint.c (ada_typedef_print): Remove. Unused.
7372 2009-02-18 Vladimir Prus <vladimir@codesourcery.com>
7374 * mi/mi-interp.c (mi_solib_loaded, mi_solib_unloaded): New.
7375 (mi_interpreter_init): Register the above.
7376 * solib.c (clear_solib): Notify solib unload.
7377 * breakpoint.c (disable_breakpoints_in_unloaded_shlib): Do not
7378 disable breakpoints on a.out targets.
7380 2009-02-17 Vladimir Prus <vladimir@codesourcery.com>
7382 * observer.c (observer_test_first_notification_function)
7383 (observer_test_second_notification_function)
7384 (observer_test_third_notification_function): Adjust prototype.
7386 2009-02-17 Pedro Alves <pedro@codesourcery.com>
7388 * Makefile.in (ALL_64_TARGET_OBS): Add amd64-dicos-tdep.o.
7389 (ALL_TARGET_OBS): Add dicos-tdep.o.
7390 (ALLDEPFILES): Add amd64-dicos-tdep.c and dicos-tdep.c.
7391 * configure.tgt (i[34567]86-*-dicos*): Add dicos-tdep.o to
7393 (x86_64-*-dicos*): Add dicos-tdep.o and amd64-dicos-tdep.o to
7395 * dicos-tdep.h, dicos-tdep.c: New.
7396 * amd64-dicos-tdep.c: New.
7397 * i386-dicos-tdep.c: Don't include solib.h, solib-target.h or
7398 inferior.h. Include dicos-tdep.h.
7399 (i386_dicos_init_abi): Call dicos_init_abi.
7400 (i386_dicos_bfd_has_symbol_p): Delete.
7401 (i386_dicos_osabi_sniffer): Use dicos_load_module_p.
7403 * NEWS: Mention x86-64 DICOS target support.
7405 2009-02-16 Doug Evans <dje@google.com>
7407 * amd64-tdep.c (amd64_skip_prefixes): Renamed from skip_prefixes.
7408 All callers updated.
7409 (amd64_get_insn_details): Handle more 3-byte opcode insns.
7410 (amd64_breakpoint_p): Delete.
7411 (amd64_displaced_step_fixup): When fixing up after stepping an int3,
7412 don't back up pc to the start of the int3.
7413 * i386-tdep.c: #include opcode/i386.h.
7414 (i386_skip_prefixes): New function.
7415 (i386_absolute_jmp_p): Constify argument.
7416 (i386_absolute_call_p,i386_ret_p,i386_call_p,i386_syscall_p): Ditto.
7417 (i386_breakpoint_p): Delete.
7418 (i386_displaced_step_fixup): Handle unnecessary or redundant prefixes.
7419 When fixing up after stepping an int3, don't back up pc to the start
7422 2009-02-16 Pedro Alves <pedro@codesourcery.com>
7424 * corelow.c (core_close): Don't hardcode the core's pid.
7425 (core_open): Find core threads before calling
7426 post_create_inferior.
7427 (add_to_thread_list, get_core_register_section): Take into account
7428 systems where the regset section names encode the pid of the
7431 * gdbarch.sh (core_reg_section_encodes_pid): New gdbarch setting.
7432 * gdbarch.h, gdbarch.c: Regenerate.
7434 * amd64-sol2-tdep.c (amd64_sol2_init_abi): Set it.
7435 * i386-sol2-tdep.c (i386_sol2_init_abi): Set it.
7436 * sparc-sol2-tdep.c (sparc32_sol2_init_abi): Set it.
7437 * sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Set it.
7439 2009-02-14 Vladimir Prus <vladimir@codesourcery.com>
7441 Include frame information for *stopped due to CLI commands.
7443 * ada-tasks.c (ada_normal_stop_observer): Adjust prototype.
7444 * infcmd.c (finish_command_continuation): Pass '1' for
7445 'print_frame' parameter to the observer.
7446 * infrun.c (normal_stop): Don't print mi-specific information
7447 here. Pass 'stop_print_frame' to the 'print_frame' parameter
7449 * mi/mi-interp.c (mi_on_normal_stop): Adjust prototype.
7450 If we need to print frame, and current uiout is not the MI one,
7453 2009-02-13 Pierre Muller <muller@ics.u-strasbg.fr>
7455 * xtensa-tdep.c (call0_analyze_prologue): Delete BSZ macro.
7456 Replace BSZ macro uses by XTENSA_ISA_BSZ macro.
7458 2009-02-12 Jan Kratochvil <jan.kratochvil@redhat.com>
7461 * dwarf2read.c (process_die <DW_TAG_module>, read_module)
7462 (scan_partial_symbols <DW_TAG_module>, add_partial_module): New.
7464 2009-02-11 Pierre Muller <muller@ics.u-strasbg.fr>
7466 * dwarf2read.c (read_base_type): Set code to TYPE_CODE_CHAR
7467 for DW_ATE_signed_char and DW_ATE_unsigned_char
7468 for pascal language.
7470 2009-02-11 Jim Meyering <meyering@redhat.com>
7471 Jan Kratochvil <jan.kratochvil@redhat.com>
7473 Avoid NULL dereference.
7474 * stack.c (return_command): Guard use of SYMBOL_TYPE (thisfun).
7475 New variable func_type.
7477 2009-02-11 Pedro Alves <pedro@codesourcery.com>
7479 * gdbarch.c: Regenerate.
7481 2009-02-10 Pierre Muller <muller@ics.u-strasbg.fr>
7483 * p-lang.c (is_pascal_string_type): Fix comment.
7484 Determine exact size of char elements for GPC
7486 (pascal_printstr): Handle char width of 2 or 4.
7487 * p-valprint.c (pascal_val_print): Handle char
7490 2009-02-07 Daniel Jacobowitz <dan@codesourcery.com>
7492 * dwarf2read.c (dwarf2_build_psymtabs_hard): Move lowpc and highpc
7493 inside the loop. Only call addrmap_set_empty if the compilation unit
7494 had DW_AT_high_pc and DW_AT_low_pc. Update call to
7495 scan_partial_symbols.
7496 (scan_partial_symbols): Take NEED_PC argument and pass it along with
7498 (add_partial_namespace): Take NEED_PC argument and pass it through.
7499 (add_partial_subprogram): Take NEED_PC argument. Update the addrmap
7502 2009-02-07 Pedro Alves <pedro@codesourcery.com>
7504 * NEWS: Mention inspecting extra signal information, $_siginfo,
7505 and the qXfer:siginfo:read and qXfer:siginfo:write packets.
7507 2009-02-07 Pedro Alves <pedro@codesourcery.com>
7509 * linux-nat.c (PTRACE_SETSIGINFO): Define if PTRACE_GETSIGINFO
7512 2009-02-06 Pedro Alves <pedro@codesourcery.com>
7514 * amd64-linux-nat.c (compat_int_t, compat_uptr_t, compat_time_t)
7515 (compat_timer_t, compat_clock_t, struct compat_timeval)
7516 (compat_sigval_t, compat_siginfo_t): New types.
7517 (cpt_si_pid, cpt_si_uid, cpt_si_timerid, cpt_si_overrun)
7518 (cpt_si_status, cpt_si_utime, cpt_si_stime, cpt_si_ptr)
7519 (cpt_si_addr, cpt_si_band, cpt_si_fd): New defines.
7520 (compat_siginfo_from_siginfo, siginfo_from_compat_siginfo)
7521 (amd64_linux_siginfo_fixup): New.
7522 * linux-nat.c (linux_nat_siginfo_fixup): New.
7523 (siginfo_fixup): New.
7524 (linux_xfer_siginfo): Use siginfo_fixup to convert between the
7525 siginfo layout expected by ptrace and the siginfo layout of the
7527 (linux_nat_set_siginfo_fixup): New.
7528 * linux-nat.h (linux_nat_set_siginfo_fixup): Declare.
7530 2009-02-06 Pedro Alves <pedro@codesourcery.com>
7532 * target.h (enum target_object): Add new TARGET_OBJECT_SIGNAL_INFO.
7533 * infrun.c (siginfo_value_read, siginfo_value_write): New.
7534 (siginfo_value_funcs): New.
7535 (siginfo_make_value): New.
7536 (_initialize_infrun): Create the $_siginfo convenience variable.
7537 * gdbtypes.h (append_composite_type_field_aligned): Declare.
7538 * gdbtypes.c (append_composite_type_field): Rename to...
7539 (append_composite_type_field_aligned): ... this. Add ALIGNMENT
7540 argument. Handle it.
7541 (append_composite_type_field): Rewrite on top of
7542 append_composite_type_field_aligned.
7543 * value.h (internalvar_make_value): New typedef.
7544 (struct internalvar) <make_value>: New field.
7545 (create_internalvar_type_lazy): Declare.
7546 * value.c (create_internalvar): Clear make_value.
7547 (create_internalvar_type_lazy): New.
7548 (value_of_internalvar): If make_value is set use it.
7549 (preserve_values): Skip internal variables that don't have a
7551 * gdbarch.sh (get_siginfo_type): New.
7552 * gdbarch.h, gdbarch.c: Regenerate.
7554 * linux-tdep.h, linux-tdep.c: New.
7555 * amd64-linux-tdep.c: Include "linux-tdep.h".
7556 (amd64_linux_init_abi): Register linux_get_siginfo_type and
7557 linux_get_siginfo_mapper.
7558 * i386-linux-tdep.c: Include "linux-tdep.h".
7559 (i386_linux_init_abi): Register linux_get_siginfo_type and
7560 linux_get_siginfo_mapper.
7561 * arm-linux-tdep.c: Include "linux-tdep.h".
7562 (i386_linux_init_abi): Register linux_get_siginfo_type and
7563 linux_get_siginfo_mapper.
7565 * linux-nat.c (linux_xfer_siginfo): New.
7566 (linux_nat_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO.
7567 * remote.c (PACKET_qXfer_siginfo_read)
7568 (PACKET_qXfer_siginfo_write): New.
7569 (feature remote_protocol_features): Add "qXfer:siginfo:read" and
7570 "qXfer:siginfo:write" features.
7571 (remote_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO.
7572 (_initialize_remote): Add "set/show remote read-siginfo-object"
7573 and "set/show remote write-siginfo-object" commands.
7575 * Makefile.in (ALL_TARGET_OBS): Add linux-tdep.o.
7576 (HFILES_NO_SRCDIR): Add linux-tdep.h.
7577 (ALLDEPFILES): Add linux-tdep.c.
7579 * configure.tgt (arm*-*-linux* | arm*-*-uclinux*)
7580 (i[34567]86-*-linux*, x86_64-*-linux*): Add linux-tdep.o to
7583 2009-02-06 Jim Blandy <jimb@codesourcery.com>
7584 Daniel Jacobowitz <dan@codesourcery.com>
7585 Vladimir Prus <vladimir@codesourcery.com>
7586 Pedro Alves <pedro@codesourcery.com>
7588 * defs.h (enum lval_type): New value: lval_computed.
7589 * value.h (struct lval_funcs): New type.
7590 (allocate_computed_value, value_computed_funcs)
7591 (value_computed_closure): New declarations.
7592 * value.c (struct value): Add a structure to the location union
7593 for computed lvalues, containing 'funcs' and 'closure' members.
7594 (allocate_computed_value, value_computed_funcs)
7595 (value_computed_closure): New functions.
7596 (value_free): For computed lvalues, call the closure's
7597 'free_closure' function before freeing the value itself.
7598 (value_copy): If we're copying an lval_computed value, call the
7599 closure's 'copy_closure' function.
7600 (set_value_component_location): If the original value is a
7601 computed lvalue, then call the closure's 'copy_closure' function.
7602 (value_of_internalvar): If an internal variable's value is a
7603 computed lvalue, make retrieving its value produce an equivalent
7605 * valops.c (value_fetch_lazy): Unlazy computed lvalues by calling
7606 their read function.
7607 (value_assign): Assign to computed lvalues by calling their write
7610 2009-02-06 Pedro Alves <pedro@codesourcery.com>
7612 * linux-nat.c (linux_nat_wait): Adjust.
7613 (linux_nat_pid_to_str): Adjust. Remove call to thread_db_init.
7614 * linux-nat.h (thread_db_init): Delete declaration.
7615 * linux-thread-db.c (target_beneath): Delete.
7616 (thread_db_init): Delete.
7617 (thread_db_detach): Use find_target_beneath.
7618 (thread_db_wait): Adjust interface. Use find_target_beneath.
7619 (thread_db_mourn_inferior): Use find_target_beneath.
7620 (thread_db_can_async_p, thread_db_is_async_p, thread_db_async)
7621 (thread_db_async_mask): Delete.
7622 (thread_db_pid_to_str): Adjust interface. Use
7623 find_target_beneath.
7624 (thread_db_get_thread_local_address): Adjust interface. Use
7625 find_target_beneath.
7626 (init_thread_db_ops): Delete references to delete functions.
7627 * target.c (update_current_target): Don't inherit or default
7628 to_wait. Don't inherit to_pid_to_str and
7629 to_get_thread_local_address.
7630 (target_translate_tls_address): Look for a pushed target that
7631 implements to_get_thread_local_address, and use it instead of
7632 checking for target_get_thread_local_address_p.
7633 (target_wait, target_pid_to_str): Reimplement as functions.
7634 (dummy_pid_to_str): New.
7635 (init_dummy_target): Register it.
7636 (debug_to_wait): Delete.
7637 * target.h (struct target_ops): Make to_wait, to_pid_to_str and
7638 to_get_thread_local_address accept a pointer to struct target_ops.
7639 (target_wait): Delete macro, and declare as function.
7640 (target_pid_to_str): Likewise.
7641 (target_get_thread_local_address)
7642 (target_get_thread_local_address_p): Delete.
7643 (noprocess): Add NORETURN and ATTR_NORETURN tags.
7644 * inf-ptrace.c (inf_ptrace_wait): Adjust.
7645 (inf_ptrace_pid_to_str): New.
7646 (inf_ptrace_target): Use inf_ptrace_pid_to_str.
7647 * aix-thread.c (aix_thread_wait, aix_thread_pid_to_str): Adjust.
7648 * bsd-kvm.c (bsd_kvm_pid_to_str): Adjust.
7649 * bsd-uthread.c (bsd_uthread_wait, bsd_uthread_pid_to_str):
7651 * corelow.c (core_pid_to_str): Adjust.
7652 * darwin-nat.c (darwin_wait, darwin_pid_to_str): Adjust.
7653 * dec-thread.c (dec_thread_wait, dec_thread_pid_to_str): Adjust.
7654 * gnu-nat.c (gnu_wait, gnu_pid_to_str): Adjust.
7655 * go32-nat.c (go32_wait, go32_pid_to_str): Adjust.
7656 * hpux-thread.c (hpux_thread_wait): Adjust.
7657 * inf-ttrace.c (inf_ttrace_wait, inf_ttrace_pid_to_str): Adjust.
7658 * monitor.c (monitor_wait, monitor_pid_to_str): Adjust.
7659 * nto-procfs.c (procfs_wait, procfs_pid_to_str): Adjust.
7660 * procfs.c (procfs_pid_to_str): Adjust.
7661 * remote-m32r-sdi.c (m32r_wait, m32r_pid_to_str): Adjust.
7662 * remote-mips.c (mips_wait): Adjust.
7663 * remote-sim.c (gdbsim_wait, gdbsim_pid_to_str): Adjust.
7664 * remote.c (remote_wait, remote_pid_to_str)
7665 (remote_get_thread_local_address): Adjust.
7666 * rs6000-nat.c (rs6000_wait): Adjust.
7667 * sol-thread.c (procfs_pid_to_str): Adjust declaration.
7668 (sol_thread_wait, solaris_pid_to_str): Adjust.
7669 * spu-linux-nat.c (spu_child_wait): Adjust.
7670 * windows-nat.c (windows_wait, windows_pid_to_str): Adjust.
7672 2009-02-06 Tom Tromey <tromey@redhat.com>
7674 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-cmd.o.
7675 (SUBDIR_PYTHON_SRCS): Add python-cmd.c.
7676 (python-cmd.o): New target.
7677 * cli/cli-decode.c (set_cmd_completer): Add self parameter to
7678 completer prototype.
7679 (add_cmd): Initialize destroyer member of cmd_list_element. Use
7680 make_symbol_completion_list_fn as completer.
7681 (delete_cmd): Call destroyer if one is set.
7682 * cli/cli-decode.h (cmd_list_element): Add cmd parameter to
7683 completer member. Add destroyer member.
7684 (set_cmd_completer): Add self parameter to
7685 completer prototype.
7686 * command.h (set_cmd_completer): Add cmd parameter to
7687 completer prototype.
7688 * completer.c (noop_completer, filename_completer,
7689 location_completer, expression_completer, command_completer): Adapt
7690 to new completer prototype.
7691 (complete_line_internal): Pass new parameter to completer function.
7692 * completer.h (noop_completer, filename_completer,
7693 location_completer, expression_completer, command_completer): Adapt
7694 prototypes to new completer prototype.
7695 * interps.c (interpreter_completer): Adapt to new completer
7697 * python/python-cmd.c: New file.
7698 * python/python-internal.h (gdbpy_initialize_commands): Add
7700 (gdbpy_doc_cst): Add forward declaration.
7701 * python/python.c (gdbpy_doc_cst): Declare.
7702 (_initialize_python): Call gdbpy_initialize_commands. Initialize
7704 * symtab.c (make_symbol_completion_list_fn): New function.
7705 * symtab.h (make_symbol_completion_list_fn): Add prototype.
7707 2009-02-06 Pedro Alves <pedro@codesourcery.com>
7709 * target.c (target_get_osdata): Check for equal or higher than
7710 process_stratum, not dummy_stratum.
7712 2009-02-06 Pedro Alves <pedro@codesourcery.com>
7714 * remote.c (extended_remote_can_run): Delete.
7715 (init_remote_ops): Don't register it.
7716 * target.c (target_get_osdata): Don't check for target_can_run.
7717 Instead any target that has already been pushed, otherwise
7718 fallback to the default run target.
7720 2009-02-06 Pedro Alves <pedro@codesourcery.com>
7722 * target.c (target_create_inferior, target_detach)
7723 (target_mourn_inferior, target_attach, target_close): Do target
7725 (debug_to_attach, debug_to_detach, debug_to_create_inferior)
7726 (debug_to_mourn_inferior, debug_to_close): Delete.
7727 (setup_target_debug): Adjust.
7729 2009-02-05 Pedro Alves <pedro@codesourcery.com>
7731 * target.h (target_stopped_data_address_p): Delete declaration,
7732 and don't define as macro.
7733 * target.c (target_stopped_data_address_p): Delete.
7735 2009-02-05 Thiago Jung Bauermann <bauerman@br.ibm.com>
7736 Tom Tromey <tromey@redhat.com>
7738 * python/python-utils.c (target_string_to_unicode): New function.
7739 * python/python-internal.h (target_string_to_unicode): New prototype.
7740 * python/python-value.c (valpy_string): New function.
7741 (value_object_methods): Add `string' entry.
7743 2009-02-05 Pedro Alves <pedro@codesourcery.com>
7745 * target.h (target_tid_to_str): Delete.
7746 * thread.c (print_thread_info, thread_apply_all_command)
7747 (thread_apply_command, thread_command, do_captured_thread_select):
7748 Use target_pid_to_str instead of target_tid_to_str.
7749 * linux-fork.c (delete_fork_command): Likewise.
7751 2009-02-05 Pedro Alves <pedro@codesourcery.com>
7753 * frame.c (has_stack_frames): Make public.
7754 (get_prev_frame): Don't allow a NULL this_frame anymore.
7755 * frame.h (has_stack_frames): Declare.
7756 * varobj.c (find_frame_addr_in_frame_chain): Don't ever pass NULL
7757 to get_prev_frame, instead start at get_current_frame.
7758 (varobj_create): Check has_stack_frames before getting any frame;
7759 eliminate one usage of deprecated_safe_get_selected_frame.
7761 2009-02-05 Tom Tromey <tromey@redhat.com>
7762 Thiago Jung Bauermann <bauerman@br.ibm.com>
7764 * python/python.c (GdbMethods): Move to bottom of file.
7765 (get_parameter, execute_gdb_command, gdbpy_write,
7766 gdbpy_flush): Remove forward declarations.
7767 (eval_python_from_control_command): Fix error checking of function
7768 PyRun_SimpleString. Fix error string.
7769 (python_command): Likewise.
7770 (execute_gdb_command): Added from_tty argument.
7772 2009-02-05 Thiago Jung Bauermann <bauerman@br.ibm.com>
7774 * language.h (language_dfn): Add la_get_string member.
7775 (LA_GET_STRING): New macro.
7776 (default_get_string): New prototype.
7777 * language.c (default_get_string): New function.
7778 (unknown_language_defn, auto_language_defn, local_language_defn): Use
7779 default_get_string for la_get_string.
7780 * c-lang.c (c_get_string): New function.
7781 (c_language_defn, cplus_language_defn, asm_language_defn): Use
7782 c_get_string for la_get_string.
7783 (minimal_language_defn): Likewise
7784 * ada-lang.c (ada_language_defn): Likewise.
7785 * f-lang.c (f_language_defn): Use default_get_string for
7787 * jv-lang.c (java_language_defn): Likewise.
7788 * m2-lang.c (m2_language_defn): Likewise.
7789 * objc-lang.c (objc_language_defn): Likewise.
7790 * p-lang.c (p_language_defn): Likewise.
7791 * scm-lang.c (scm_language_defn): Likewise.
7792 * typeprint.c (type_to_string): New function.
7793 * value.h (type_to_string): New prototype.
7794 * valprint.c (val_print_string): Factor out code for reading string
7795 from the inferior into its own function. Put 2 spaces after period
7797 (read_string): New function.
7798 * valprint.h (read_string): New prototype.
7800 2009-01-07 Pierre Muller <muller@ics.u-strasbg.fr>
7801 Tom Tromey <tromey@redhat.com>
7803 PR breakpoints/8079:
7804 * breakpoint.c (print_one_breakpoint): Use exp_string field
7805 to display expression of watchpoints.
7806 (mention): Likewise.
7807 (watch_command_1): Remove trailing whitespace from expression.
7808 * printcmd.c (struct display) <exp_string>: New field.
7809 (display_command): Set exp_string.
7810 (free_display): Free exp_string.
7811 (clear_displays): Use free_display.
7812 (do_one_display): Print exp_string.
7813 (display_info): Likewise.
7815 2009-02-04 Tom Tromey <tromey@redhat.com>
7816 Thiago Jung Bauermann <bauerman@br.ibm.com>
7817 Phil Muldoon <pmuldoon@redhat.com>
7819 * python/python-internal.h (gdbpy_get_value_from_history): Rename
7820 prototype to gdbpy_history.
7821 (gdbpy_is_string): Declare.
7822 (python_string_to_host_string): Declare.
7823 * python/python-utils.c (gdbpy_is_string): New function.
7824 (unicode_to_encoded_string): New function.
7825 (unicode_to_target_string): Use it.
7826 (python_string_to_host_string): New function.
7827 * python/python-value.c (valpy_address): New function.
7828 (convert_value_from_python): Use gdbpy_is_string. Change to throw
7829 Python exception instead of a GDB exception on error. Properly check
7831 (valpy_getitem): Convert field name to host string. Handle array
7832 accesses. Adapt to new behaviour of convert_value_from_python.
7833 (valpy_new): Adapt to new behaviour of convert_value_from_python.
7834 (enum valpy_opcode) <VALPY_LSH, VALPY_RSH, VALPY_BITAND,
7835 VALPY_BITXOR, VALPY_BITOR>: New constants.
7836 (valpy_binop): Update. Adapt to new behaviour of
7837 convert_value_from_python.
7838 (valpy_invert): New function.
7839 (valpy_lsh): Likewise.
7840 (valpy_rsh): Likewise.
7841 (valpy_and): Likewise.
7842 (valpy_or): Likewise.
7843 (valpy_xor): Likewise.
7844 (valpy_richcompare): Call convert_value_from_python instead of doing
7846 (is_intlike, valpy_int, valpy_long, valpy_float): New functions.
7847 (gdbpy_get_value_from_history): Rename
7848 function to gdbpy_history.
7849 (gdbpy_initialize_values): Don't set tp_new.
7850 (value_object_type): Add valpy_new.
7851 (value_object_methods): Add `address' entry.
7852 (value_object_as_number): Update for new methods.
7853 * python/python.c (GdbMethods): Rename entry from
7854 `get_value_from_history' to `history'.
7856 2009-02-04 Jerome Guitton <guitton@adacore.com>
7858 * ada-lang.c (ada_template_to_fixed_record_type_1): Check size
7859 of type to guard against a crash.
7861 2009-02-04 Jerome Guitton <guitton@adacore.com>
7863 * value.c (value_from_contents_and_address): Always return
7864 a lval_memory value, even if address is null.
7866 2009-02-04 Tristan Gingold <gingold@adacore.com>
7868 * i386-darwin-tdep.c (i386_darwin_sigcontext_addr): New function.
7869 (amd64_darwin_sigcontext_addr): Ditto.
7870 (darwin_dwarf_signal_frame_p): Ditto.
7871 (i386_darwin_init_abi): Handle signal frames, use the const for
7873 (x86_darwin_init_abi_64): Ditto.
7875 2009-02-04 Tristan Gingold <gingold@adacore.com>
7877 * i386-tdep.c (i386_sigtramp_p): Make it public.
7878 * i386-tdep.h (i386_sigtramp_p): Declare.
7880 2009-02-04 Tristan Gingold <gingold@adacore.com>
7882 * machoread.c (macho_symfile_read): Read minsymtab also from
7884 (macho_symfile_read): Try to read dwarf2 frame info from main
7885 object file, but not from OSO files.
7886 (macho_symfile_offsets): Update section names for latest BFD
7888 * i386-darwin-tdep.c (i386_darwin_init_abi): Call set_solib_ops.
7889 (x86_darwin_init_abi_64): Ditto.
7890 * solib-darwin.c: New file.
7891 * solib-darwin.h: New file.
7892 * configure.tgt: Add solib.o solib-darwin.o for Darwin.
7894 2009-02-04 Tristan Gingold <gingold@adacore.com>
7896 * solist.h (struct target_so_ops): Comment fallback behavior for
7899 2009-02-03 Tom Tromey <tromey@redhat.com>
7901 * completer.c (add_struct_fields): Check type_name against NULL
7904 2009-02-03 Joel Brobecker <brobecker@adacore.com>
7906 * MAINTAINERS: Update Elena's email address.
7908 2009-02-02 Joel Brobecker <brobecker@adacore.com>
7910 * breakpoint (update_watchpoint): Minor comment adjustment.
7912 2009-02-02 Tom Tromey <tromey@redhat.com>
7915 * completer.c (count_struct_fields): Count method names.
7916 (add_struct_fields): Add matching method names.
7918 2009-02-02 Doug Evans <dje@google.com>
7920 * configure.ac (gdbkt): Check both no_tcl/no_tk first, before
7921 doing any further tcl/tk configury. Don't configure gdbtk if
7922 tcl or tk check fails.
7923 * aclocal.m4: Regenerate.
7924 * configure: Regenerate.
7926 2009-02-02 Tom Tromey <tromey@redhat.com>
7929 * valops.c (find_overload_match): Follow typedefs before taking
7930 address of object argument.
7932 2009-02-01 Doug Evans <dje@google.com>
7934 * target.h (target_waitstatus_to_string): Declare.
7935 * target.c (target_waitstatus_to_string): New function. Copied from
7936 debug_to_wait. Add missing entries for TARGET_WAITKIND_SYSCALL_ENTRY,
7937 TARGET_WAITKIND_SYSCALL_RETURN, TARGET_WAITKIND_IGNORE,
7938 TARGET_WAITKIND_NO_HISTORY.
7939 (debug_to_wait): Call it.
7940 * infrun.c (wait_for_inferior): If debug_infrun, print result of
7942 (fetch_inferior_event): Ditto.
7944 2009-01-30 Tom Tromey <tromey@redhat.com>
7946 * Makefile.in (HFILES_NO_SRCDIR): Remove i386-cygwin-tdep.h.
7948 2009-01-30 Vladimir Prus <vladimir@codesourcery.com>
7951 * thread.c (do_captured_list_thread_ids): Report the current
7954 2009-01-30 Vladimir Prus <vladimir@codesourcery.com>
7956 * breakpoint.c (create_breakpoint, create_breakpoints)
7957 (break_command_really, set_breakpoint): New parameter enabled.
7958 (create_breakpoint, break_command_really): Make breakpoint
7959 disabled if so requested.
7960 * breakpoint.h (set_breakpoint): New parameter enabled.
7961 * mi/mi-cmd-break.c (mi_cmd_break_insert): Handle the -d option.
7963 2009-01-28 Doug Evans <dje@google.com>
7965 * amd64-tdep.h (amd64_displaced_step_copy_insn): Declare.
7966 (amd64_displaced_step_fixup): Declare.
7967 * amd64-tdep.c: #include opcode/i386.h, dis-asm.h.
7968 (amd64_arch_regmap): Move out of amd64_analyze_stack_align
7969 and make static global.
7970 (amd64_arch_regmap_len): New static global.
7971 (amd64_arch_reg_to_regnum): New function.
7972 (struct amd64_insn): New struct.
7973 (struct displaced_step_closure): New struct.
7974 (onebyte_has_modrm,twobyte_has_modrm): New static globals.
7975 (rex_prefix_p,skip_prefixes)
7976 (amd64_insn_length_fprintf,amd64_insn_length_init_dis)
7977 (amd64_insn_length,amd64_get_unused_input_int_reg)
7978 (amd64_get_insn_details,fixup_riprel,fixup_displaced_copy)
7979 (amd64_displaced_step_copy_insn)
7980 (amd64_absolute_jmp_p,amd64_absolute_call_p,amd64_ret_p)
7981 (amd64_call_p,amd64_breakpoint_p,amd64_syscall_p)
7982 (amd64_displaced_step_fixup): New functions.
7983 * amd64-linux-tdep.c: #include arch-utils.h.
7984 (amd64_linux_init_abi): Install displaced stepping support.
7986 2009-01-28 Daniel Jacobowitz <dan@codesourcery.com>
7987 Jerome Guitton <guitton@adacore.com>
7989 * configure, config.in: Regenerated.
7990 * configure.ac: Add --with-system-gdbinit.
7991 * main.c (get_init_files): New.
7992 (captured_main): Use get_init_files. Load system gdbinit before
7994 (print_gdb_help): Print location of init files.
7996 2009-01-28 Pedro Alves <pedro@codesourcery.com>
7998 * corefile.c (generic_search): Delete disabled code.
7999 * gdbcore.h (generic_search): Delete declaration.
8001 2009-01-26 Pedro Alves <pedro@codesourcery.com>
8003 * linux-nat.c (linux_child_follow_fork): Copy attach_flag from the
8004 parent to the child.
8005 * inf-ttrace.c (inf_ttrace_follow_fork): Likewise.
8006 * inf-ptrace.c (inf_ptrace_follow_fork): Likewise. Use
8007 remove_breakpoints to remove breakpoints from the parent.
8009 2009-01-26 Pedro Alves <pedro@codesourcery.com>
8011 PR backtrace/9458, PR backtrace/8864:
8012 * frame.c (create_new_frame): Update the frame's cached PC before
8013 finding its unwinder. Use frame_id_build to build the new frame's
8015 * stack.c (parse_frame_specification_1): Correct setting ``addrs''
8016 array values from the ``args'' array values.
8018 2009-01-26 Pedro Alves <pedro@codesourcery.com>
8020 * gdbtypes.c (alloc_type, alloc_type_instance, create_range_type)
8021 (create_array_type, create_set_type, init_flags_type)
8022 (copy_type_recursive): Replace pairs of calls to XALLOC and memset
8023 with a call to XZALLOC or XCALLOC, and pairs of calls to
8024 obstack_alloc and memset with a call to OBSTACK_ZALLOC.
8026 2009-01-26 Pedro Alves <pedro@codesourcery.com>
8028 Add "maint set|show internal-error|internal-warning quit|corefile
8029 ask|yes|no" commands.
8032 * utils.c (internal_problem_ask, internal_problem_yes)
8033 (internal_problem_no, internal_problem_modes): New.
8034 (struct internal_problem): Remove FIXME. Make should_quit and
8035 should_dump_core types to char *.
8036 (internal_vproblem, internal_error_problem)
8037 (internal_warning_problem): Adjust.
8038 (set_internal_problem_cmd, show_internal_problem_cmd): New dummy
8040 (add_internal_problem_command): New.
8041 (_initialize_utils): New.
8043 2009-01-25 Pedro Alves <pedro@codesourcery.com>
8045 * infcmd.c (program_info): Use paddress instead of casting stop_pc
8048 2009-01-24 Pedro Alves <pedro@codesourcery.com>
8050 * infrun.c (normal_stop): Don't call
8051 deprecated_update_frame_pc_hack.
8052 * frame.c (deprecated_update_frame_pc_hack)
8053 (deprecated_update_frame_base_hack): Delete, and ...
8054 (create_new_frame): ... inline here.
8055 * frame.h (deprecated_update_frame_pc_hack)
8056 (deprecated_update_frame_base_hack): Delete declarations.
8058 2009-01-23 Pedro Alves <pedro@codesourcery.com>
8060 * cli/cli-decode.c (add_setshow_zuinteger_cmd): New.
8061 * cli/cli-setshow.c (do_setshow_command): Handle it.
8062 * command.h (enum var_types): Add var_zuinteger.
8063 (add_setshow_zuinteger_cmd): Declare.
8065 * valprint.c (_initialize_valprint): Change the set input-radix
8066 and set output-radix commands to zuinteger type.
8068 2009-01-23 Pedro Alves <pedro@codesourcery.com>
8071 * infrun.c (normal_stop): Tag threads as stopped, and run the
8072 hook-stop before printing the stack frame.
8074 2009-01-22 Pedro Alves <pedro@codesourcery.com>
8077 * gnu-v3-abi.c (gnuv3_baseclass_offset): Call check_typedef on
8080 2009-01-20 Kazu Hirata <kazu@codesourcery.com>
8082 * gdb/procfs.c (info_mappings_callback): Cast map->pr_size to
8085 2009-01-20 Daniel Jacobowitz <dan@codesourcery.com>
8088 * infcmd.c (signal_command): Do not specify a resume PC.
8090 2009-01-19 Doug Evans <dje@google.com>
8092 * dummy-frame.c (dummy_frame): Replace regcache member with
8094 (dummy_frame_push): Replace caller_regcache arg with caller_state.
8095 All callers updated.
8096 (remove_dummy_frame,pop_dummy_frame,lookup_dummy_frame): New fns.
8097 (dummy_frame_pop): Rewrite. Verify requested frame is in the
8098 dummy frame stack. Restore program state.
8099 (cleanup_dummy_frames): Rewrite.
8100 (dummy_frame_sniffer): Update. Make static.
8101 * dummy-frame.h (regcache,frame_info): Delete forward decls.
8102 (inferior_thread_state): New forward decl.
8103 (dummy_frame_push): Update prototype.
8104 * frame.c (frame_pop): dummy_frame_pop now does all the work for
8106 * infcall.c (breakpoint_auto_delete_contents): Delete.
8107 (get_function_name,run_inferior_call): New fns.
8108 (call_function_by_hand): Simplify by moving some code to
8109 get_function_name, run_inferior_call. Inferior function call wrapped
8110 in TRY_CATCH so there's less need for cleanups and all exits from
8111 proceed are handled similarily. Detect program exit.
8112 Detect program stopping in a different thread.
8113 Make error messages more consistent.
8114 * inferior.h (inferior_thread_state): Declare (opaque type).
8115 (save_inferior_thread_state,restore_inferior_thread_state,
8116 make_cleanup_restore_inferior_thread_state,
8117 discard_inferior_thread_state, get_inferior_thread_state_regcache):
8119 (save_inferior_status): Update prototype.
8120 * infrun.c: (normal_stop): When stopped for the completion of an
8121 inferior function call, verify the expected stack frame kind.
8122 (inferior_thread_state): New struct.
8123 (save_inferior_thread_state,restore_inferior_thread_state,
8124 do_restore_inferior_thread_state_cleanup,
8125 make_cleanup_restore_inferior_thread_state,
8126 discard_inferior_thread_state,
8127 get_inferior_thread_state_regcache): New functions.
8128 (inferior_status): Move stop_signal, stop_pc, registers to
8129 inferior_thread_state. Remove restore_stack_info.
8130 (save_inferior_status): Remove arg restore_stack_info.
8131 All callers updated. Remove saving of state now saved by
8132 save_inferior_thread_state.
8133 (restore_inferior_status): Remove restoration of state now done by
8134 restore_inferior_thread_state.
8135 (discard_inferior_status): Remove freeing of registers, now done by
8136 discard_inferior_thread_state.
8138 2009-01-18 Pedro Alves <pedro@codesourcery.com>
8140 * tui/tui-disasm.c (tui_vertical_disassem_scroll): Scroll one line
8141 at a time, times NUM_TO_SCROLL.
8142 * tui/tui-winsource.c (tui_horizontal_source_scroll): Don't try to
8143 fetch the selected frame if there is no stack.
8145 2009-01-18 Pedro Alves <pedro@codesourcery.com>
8148 * gdbthread.h (finish_thread_state, finish_thread_state_cleanup):
8150 * thread.c (finish_thread_state, finish_thread_state_cleanup): New.
8151 * infrun.c (wait_for_inferior, fetch_inferior_event): If an error
8152 is thrown while handling an event, finish the thread state.
8153 (normal_stop): Use finish_thread_state cleanup.
8154 * infcmd.c (run_command_1): If an error is thrown while starting
8155 the inferior, finish the thread state.
8157 2009-01-18 Pedro Alves <pedro@codesourcery.com>
8159 * tui/tui-winsource.c (tui_update_breakpoint_info): In asm layout,
8160 skip breakpoints without a location (pending breakpoints).
8162 2009-01-18 Pedro Alves <pedro@codesourcery.com>
8165 * hppa-hpux-tdep.c (hppa_hpux_write_pc): Remove 'return'.
8167 2009-01-18 Nick Roberts <nickrob@snap.net.nz>
8169 * thread.c (thread_command): Move call to annotate_thread_changed
8171 (do_captured_thread_select): ... here, to avoid printing an
8172 annotation if the thread change generates an exception.
8174 2009-01-16 Joel Brobecker <brobecker@adacore.com>
8176 * NEWS: Document x86_64/MinGW as a new native configuration.
8178 2009-01-16 Joel Brobecker <brobecker@adacore.com>
8180 * NEWS: Move the documentation of "info os processes" to
8181 the appropriate section (documenting the new commands).
8183 2009-01-15 Doug Evans <dje@google.com>
8185 * target.h (target_signal_to_string): Make return type const char *.
8186 (target_signal_to_name): Ditto.
8187 (target_signal_from_name): Make arg const char *.
8188 * infrun.c (sig_print_info): Update.
8189 * signals/signals.c (signals): Make array and struct members const.
8190 (target_signal_to_string): Make return type const char *.
8191 (target_signal_to_name): Ditto.
8192 (target_signal_from_name): Make arg const char *.
8194 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
8195 Tristan Gingold <gingold@adacore.com>
8197 * solist.h (struct target_so_ops): New member bfd_open.
8198 (solib_find): Add prototype.
8199 (solib_bfd_fopen): Add prototype.
8200 * solib.c (solib_find, solib_bfd_fopen): New functions, extracted
8201 from solib_bfd_open.
8202 (solib_bfd_open): Use ops->bfd_open override if present. Call
8203 solib_find and solib_bfd_open otherwise.
8205 * objfiles.h (OBJF_KEEPBFD): New define.
8206 * objfiles.c (free_objfile): Do not close BFD if OBJF_KEEPBFD
8207 objfile flag is set.
8208 * solib.c (symbol_add_stub): Do not allocate second BFD for
8209 shared library; use OBJF_KEEPBFD flag on solib objfile.
8211 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
8213 * frame.c (get_frame_arch): Abort if called with NULL this_frame.
8215 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
8217 * value.h (address_of_variable): Add prototype.
8218 (locate_var_value): Remove prototype.
8220 * findvar.c (read_var_value): Do not attempt to default frame
8222 (locate_var_value): Remove function.
8223 * valops.c (value_of_variable): Retrieve selected frame for
8224 symbols that require a frame when called with NULL block.
8225 * valops.c (address_of_variable): New function.
8227 * eval.c (evaluate_subexp_for_address): Call address_of_variable
8228 instead of calling locate_var_value.
8229 (evaluate_subexp_with_coercion): Likewise.
8231 2009-01-14 Daniel Jacobowitz <dan@codesourcery.com>
8233 * NEWS: Document "define" for prefixed commands.
8234 * cli/cli-cmds.c (show_user): Update calls to show_user_1. Call
8235 show_user_1 for prefix commands.
8236 * cli/cli-decode.c (help_cmd_list): Recurse for "help user-defined".
8237 * cli/cli-script.c (validate_comname): Rewrite to handle prefix
8238 commands. Return the containing command list.
8239 (define_command, document_command): Update to handle prefix commands.
8240 (show_user_1): Add prefix and name arguments. Handle prefix
8242 * cli/cli-script.h (show_user_1): Update prototype.
8244 2009-01-14 Kai Tietz <kai.tietz@onevision.com>
8246 * ser-mingw.c (console_select_thread): Add return to make
8248 (pipe_select_thread): Likewise.
8249 (file_select_thread): Likewise.
8251 2009-01-14 Pedro Alves <pedro@codesourcery.com>
8253 * mi/mi-main.c (mi_cmd_execute): Clean up parenthesis mess from
8256 2009-01-14 Pedro Alves <pedro@codesourcery.com>
8258 * remote.c (extended_remote_mourn_1): Invalidate our notion of
8259 current general thread.
8261 2009-01-14 Pedro Alves <pedro@codesourcery.com>
8263 * mi/mi-main.c (mi_cmd_execute): Also allow -list-thread-groups
8264 without a live selected thread.
8266 2009-01-14 Joel Brobecker <brobecker@adacore.com>
8268 Update the copyright notice of some of the files I missed
8269 in the previous copyright update.
8271 2009-01-14 Joel Brobecker <brobecker@adacore.com>
8273 * windows-nat.c (handle_unload_dll): Use %p to print the DLL
8274 base address instead of casting it to DWORD.
8276 2009-01-13 Ulrich Weigand <uweigand@de.ibm.com>
8278 * dwarf2loc.c (dwarf2_evaluate_loc_desc): Do not call get_frame_arch
8279 for NULL frame pointers.
8281 2009-01-13 Mark Kettenis <kettenis@gnu.org>
8283 * utils.c (host_address_to_string): Reimplement in a way that
8284 avoids the cast of the address to long.
8286 2009-01-13 Joel Brobecker <brobecker@adacore.com>
8288 * mdebugread.c (parse_symbol): Save the symbol private data
8289 using SYMBOL_VALUE_BYTES instead of SYMBOL_VALUE.
8290 (psymtab_to_symtab_1): Likewise.
8291 (parse_procedure): Declare variable "e" only in the scope
8292 where it is used. Extract the symbol private data using
8295 2009-01-13 Jim Blandy <jimb@codesourcery.com>
8297 Abstract out common code for copying value locations.
8299 * value.h (set_value_component_location): New declaration.
8300 * value.c (set_value_component_location): New function.
8301 (value_primitive_field): Use it.
8302 * valarith.c (value_subscript, value_subscripted_rvalue): Same.
8303 * valops.c (search_struct_field, value_slice): Same.
8304 * ada-lang.c (coerce_unspec_val_to_type)
8305 (ada_value_primitive_packed_val): Same.
8307 2009-01-13 Joel Brobecker <brobecker@adacore.com>
8309 * MAINTAINERS (GLOBAL MAINTAINERS): Add Tom Tromey.
8311 2009-01-12 Christopher Faylor <me+cygwin@cgf.cx>
8313 * amd64-windows-nat.c Rename gdb-specific win32_* to windows_*
8315 * i386-cygwin-tdep.c: Ditto.
8316 * i386-windows-nat.c: Ditto.
8317 * windows-nat.h: Ditto.
8318 * windows-tdep.c: Ditto.
8319 * windows-tdep.h: Ditto.
8320 * windows-nat.c: Ditto.
8321 (cygwin_load_start): Redefine as CORE_ADDR.
8322 (cygwin_load_end): Ditto.
8323 (windows_make_so): Coerce result of address arithmetic to uintptr_t
8324 before coercing to CORE_ADDR to avoid a compiler warning.
8325 (handle_exception): Define addr as CORE_ADDR and coerce
8326 ExceptionAddress to uintptr_t before assigining to avoid a compiler
8328 * config/djgpp/fnchange.lst: Add mappings for recently renamed windows
8331 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
8333 Fix linking with --enable-targets=all:
8334 * Makefile.in (ALL_TARGET_OBS): Add windows-tdep.o.
8335 (HFILES_NO_SRCDIR): Add windows-tdep.h.
8336 (ALLDEPFILES): Add windows-tdep.c.
8338 2009-01-11 Chris Faylor <me.gdb@cgf.cx>
8340 * win32-nat.h: Delete.
8341 * windows-nat.h: Rename from win32-nat.h.
8342 * win32-nat.c: Delete.
8343 * windows-nat.c: Rename from win32-nat.c.
8344 * win32-termcap.c: Delete.
8345 * windows-termcap.c: Rename from win32-termcap.c.
8346 * amd64-windows-nat.c: Handle rename from win32-nat.h -> windows-nat.h.
8347 * configure.ac: Handle rename from win32-termcap.c ->
8349 * configure: Regenerate.
8350 * gdb_curses.h: Change comment to reflect rename from win32-termcap.c
8351 -> windows-termcap.c.
8352 * i386-cygwin-tdep.c: Handle rename from win32-tdep.h ->
8354 * i386-windows-nat.c: Refect rename from win32-nat.h -> windows-nat.h.
8355 * windows-nat.c: Ditto. Also reflect rename from from win32-tdep.h ->
8357 (win32_make_so): Handle cygwin compiler warning due to change of
8358 load_addr from DWORD to LPVOID.
8359 (handle_load_dll): Use %p in format string to properly print address
8360 and avoid a compiler warning.
8361 (DEBUG_EXCEPTION_SIMPLE): Ditto.
8362 (handle_exception): Ditto.
8363 * windows-tdep.c: Handle rename from win32-tdep.h -> windows-tdep.h.
8364 * config/i386/cygwin.mh: Handle rename from win32-nat.o ->
8366 * config/i386/mingw.mh: Ditto.
8367 * config/i386/mingw64.mh: Ditto.
8369 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
8371 * f-typeprint.c (f_type_print_varspec_suffix): Convert the autovariable
8372 arrayprint_recurse_level to a parameter. Update all the callers. New
8373 comment at autovariables.
8375 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
8377 * gdbtypes.c (make_qualified_type, replace_type): Reformat to the GNU
8380 2009-01-11 Joel Brobecker <brobecker@adacore.com>
8382 * target.c (target_xfer_partial): Use host_address_to_string to
8383 print the address of readbuf and writebuf. Cast the address of
8384 elements inside the myaddr buffer into intptr_t.
8385 (deprecated_debug_xfer_memory): Use paddress to print memaddr.
8386 Cast the address of elements inside the myaddr buffer into
8389 2009-01-11 Joel Brobecker <brobecker@adacore.com>
8391 * amd64-windows-nat.c, amd64-windows-tdep.c: New files.
8392 * config/i386/mingw64.mh, config/i386/nm-cygwin64.h: New files.
8393 * configure.host, configure.tgt: Add handling for x86_64/windows.
8394 * config/djgpp/fnchange.lst: Add entries for amd64-windows-nat.c
8395 and amd64-windows-tdep.c.
8397 2009-01-11 Joel Brobecker <brobecker@adacore.com>
8399 * win32-tdep.h, win32-tdep.c: New files.
8400 * i386-cygwin-tdep.h: Delete.
8401 * i386-cygwin-tdep.c: Include win32-tdep.h instead of
8403 (win32_xfer_shared_library): Delete. Moved to win32-tdep.c.
8404 * win32-nat.c: Likewise.
8405 * configure.tgt: Add win32-tdep.o to the list of target object
8406 files for i386-cygwin and i386-mingw targets.
8408 2009-01-11 Joel Brobecker <brobecker@adacore.com>
8410 * win32-nat.h: New file.
8411 * win32-nat.c (mappings): Initialize to NULL.
8412 (win32_set_context_register_offsets): New function.
8413 * i386-windows-nat.c: New file.
8414 (mappings): Moved here from win32-nat.c.
8415 (_initialize_i386_windows_nat): New function.
8416 * config/i386/mingw.mh (NATDEPFILES): Add i386-windows-nat.o.
8417 * config/i386/cygwin.mh (NATDEPFILES): Likewise.
8419 2009-01-09 Andreas Schwab <schwab@suse.de>
8421 * Makefile.in (init.c): Set LANG/LC_ALL to C, not c.
8423 2009-01-09 Daniel Jacobowitz <dan@codesourcery.com>
8425 * gdbtypes.c (append_composite_type_field): Correct the location of
8428 2009-01-09 Pedro Alves <pedro@codesourcery.com>
8430 * defs.h (deprecated_error_hook): Delete declaration.
8431 * interps.c (clear_interpreter_hooks): Adjust.
8432 * remote-sim.c (gdb_os_error): Don't try to call
8433 deprecated_error_hook. No need to call exit anymore.
8434 * top.c (deprecated_error_hook): Delete.
8436 2009-01-09 Joel Brobecker <brobecker@adacore.com>
8438 * arch-utils.c (gdbarch_update_p): Use host_address_to_string
8439 to print the address of the gdbarch pointer.
8441 2009-01-09 Joel Brobecker <brobecker@adacore.com>
8443 * gdbarch.sh: Fix all the compilation errors on amd64-windows
8444 due to casting a pointer to a long when printing a function
8445 address. Instead, use host_address_to_string to convert our
8446 address to a string.
8447 * gdbarch.c: Regenerate.
8449 2009-01-09 Joel Brobecker <brobecker@adacore.com>
8451 * event-top.c (async_disconnect, async_stop_sig): use "raise"
8452 instead of "kill" to raise a signal.
8454 2009-01-09 Joel Brobecker <brobecker@adacore.com>
8456 * win32-nat.c (get_module_name): Change the type of parameter
8457 "base_address" to LPVOID. Remove unnecessary cast.
8458 (struct lm_info): Change type of load_addr to LPVOID.
8459 (win32_make_so): Change the type of parameter "load_addr"
8460 to LPVOID. Remove some unnecessary casts.
8461 (handle_unload_dll): Change the type of "lpBaseOfDll" to LPVOID.
8462 (win32_xfer_shared_libraries): Add missing cast.
8464 2009-01-09 Joel Brobecker <brobecker@adacore.com>
8466 * win32-nat.c (has_detach_ability, set_process_privilege):
8467 Cast the result of GetProcAddress to (void *) to avoid
8468 a compilation warning.
8470 2009-01-09 Joel Brobecker <brobecker@adacore.com>
8472 * win32-nat.c (CONTEXT_EXTENDED_REGISTERS): Define to 0 if not
8475 2009-01-09 Joel Brobecker <brobecker@adacore.com>
8477 * win32-nat.c (get_image_name, win32_xfer_memory): Fix type
8478 definition of local variable "done".
8479 (info_w32_command, handle_exception): Remove unnecessary cast.
8481 2009-01-09 Joel Brobecker <brobecker@adacore.com>
8483 * win32-nat.c (kernel32_DebugSetProcessKillOnExit): Renames
8484 DebugSetProcessKillOnExit. Update all uses in this file.
8485 (kernel32_DebugActiveProcessStop): Renames DebugActiveProcessStop.
8486 Update all uses in this file.
8488 2009-01-09 Joel Brobecker <brobecker@adacore.com>
8490 * win32-nat.c (do_initial_win32_stuff): Add new ops parameter,
8491 and use it when pushing the target.
8492 (win32_attach, win32_create_inferior): Update call to
8493 do_initial_win32_stuff.
8494 (win32_detach, win32_mourn_inferior): Use our ops parameter
8495 instead of the global win32_ops to unpush the target.
8497 2009-01-09 Joel Brobecker <brobecker@adacore.com>
8499 * ser-mingw.c (ser_windows_open): Use proper type when casting
8500 in call to _open_osfhandle.
8502 2009-01-09 Kai Tietz <kai.tietz@onevision.com>
8504 * coff-pe-read.c (read_pe_exported_syms): Fix typo.
8506 2009-01-09 Joel Brobecker <brobecker@adacore.com>
8508 * CONTRIBUTE: Minor reformatting.
8510 2009-01-08 Kai Tietz <kai.tietz@onevision.com>
8512 * MAINTAINERS: Add myself to Write After Approval.
8513 * coff-pe-read.c (read_pe_exported_syms): Enable read of PE+
8516 2009-01-08 Nathan Froyd <froydnj@codesourcery.com>
8518 * remote-sim.c (gdb_os_error): Mark as a noreturn function.
8519 Call exit to make it obvious to GCC.
8521 2009-01-08 Tom Tromey <tromey@redhat.com>
8523 PR breakpoints/9350:
8524 * varobj.c (varobj_invalidate): Unconditionally free
8526 * symfile.c (syms_from_objfile): Free local_addr when returning
8528 * exec.c (exec_file_attach): Do cleanups before returning.
8529 (exec_file_command): Likewise.
8530 * corefile.c (reopen_exec_file): Do cleanups before returning.
8531 * breakpoint.c (insert_breakpoint_locations): Do cleanups before
8533 (do_vec_free): New function.
8534 (update_global_location_list): Make a cleanup for old_locations.
8535 Do cleanups before returning. Remove unused variable 'e'.
8536 (find_condition_and_thread): Free result of parsing the
8538 (print_it_typical): Do cleanups before returning.
8539 (breakpoint_re_set_one): Always free sals.sals.
8541 2009-01-08 Joel Brobecker <brobecker@adacore.com>
8542 Emi Suzuki <emi-suzuki@tjsys.co.jp>
8544 * breakpoint.c (do_enable_breakpoint): Use update_watchpoint for
8547 2009-01-07 Doug Evans <dje@google.com>
8549 * top.c (gdb_prompt_string): Delete, unused.
8551 2009-01-07 Pedro Alves <pedro@codesourcery.com>
8553 Delete ONE_PROCESS_WRITETEXT leftovers.
8555 * breakpoint.c (insert_bp_location): Delete process_warning
8557 (insert_breakpoint_locations): Adjust.
8558 (reattach_breakpoints): Adjust.
8559 * infrun.c (normal_stop): Drop "It might be running in another
8562 2009-01-07 Stan Shebs <stan@codesourcery.com>
8564 * config/pa/linux.mh (XDEPFILES): Remove.
8566 2009-01-07 Doug Evans <dje@google.com>
8568 * cli/cli-cmds.c (set_debug): Fix cut-n-paste error.
8570 2009-01-07 Jan Kratochvil <jan.kratochvil@redhat.com>
8572 * f-typeprint.c (f_type_print_base <TYPE_CODE_STRUCT>): Fix output
8573 spacing, a regression from 2008-04-22.
8575 2009-01-07 Joel Brobecker <brobecker@adacore.com>
8577 * utils.c (gdb_print_host_address): Adjust implementation to
8578 reuse host_address_to_string. Move comment explaining the conversion
8579 from host address to string from here...
8580 (host_address_to_string): ... to there.
8582 2009-01-07 Emi Suzuki <emi-suzuki@tjsys.co.jp>
8584 * MAINTAINERS: Add myself for write after approval privileges.
8586 2009-01-06 Tom Tromey <tromey@redhat.com>
8588 * value.c (set_internalvar): Use value_free, not xfree.
8590 2009-01-06 Jim Blandy <jimb@red-bean.com>
8592 Check return values of functions declared with warn_unused_result
8593 attribute in GLIBC 2.8.
8594 * cli/cli-cmds.c (pwd_command): Check return value from getcwd.
8595 * inflow.c (check_syscall): New function.
8596 (new_tty): Use check_syscall to check return values from open and dup.
8597 * linux-nat.c (linux_nat_info_proc_cmd): Check return value from fgets.
8598 * main.c (captured_main): Call cwd after setting up gdb_stderr;
8599 check for errors from getcwd.
8600 * mi/mi-cmd-env.c (mi_cmd_env_pwd): Check return value from getcwd.
8601 * ui-file.c (stdio_file_write): Ignore return value from fwrite.
8602 (stdio_file_fputs): Same.
8603 * utils.c (internal_vproblem): abort if last-ditch error message
8606 * top.c (gdb_init): Don't set the current directory here; that's
8607 already been done in captured_main.
8609 2009-01-06 Sandra Loosemore <sandra@codesourcery.com>
8611 * ser-tcp.c: Adjust includes.
8612 (tcp_set_cmdlist, tcp_show_cmdlist): Declare.
8613 (tcp_auto_retry, tcp_retry_limit): Declare.
8614 (TIMEOUT): Remove, in favor of tcp_retry_limit.
8615 (POLL_INTERVAL): Increase to 5, in favor of backoff logic.
8616 (wait_for_connect): New function.
8617 (net_open): Use it. Add auto-retry logic.
8618 (set_tcp_cmd, show_tcp_cmd): New functions.
8619 (_initialize_ser_tcp): Initialize new "set/show tcp auto-retry"
8620 and "set/show tcp connect-timeout" commands.
8621 * NEWS: Document new commands.
8623 2009-01-05 Tom Tromey <tromey@redhat.com>
8625 * python/python-internal.h (Py_ssize_t): Define as int.
8627 2009-01-05 Jim Blandy <jimb@red-bean.com>
8629 * MAINTAINERS: Fix my e-mail address as steering committee member.
8631 2009-01-03 Joel Brobecker <brobecker@adacore.com>
8633 Updated copyright notices for most files.
8635 2009-01-03 Joel Brobecker <brobecker@adacore.com>
8637 * top.c (print_gdb_version): Update copyright year.
8639 2009-01-03 Joel Brobecker <brobecker@adacore.com>
8641 * config/djgpp/fnchange.lst: Add entry for ChangeLog-2008.
8643 2009-01-01 Pedro Alves <pedro@codesourcery.com>
8645 PR breakpoints/9681:
8646 * exceptions.h (enum errors): New error type, MEMORY_ERROR.
8647 * corefile.c (memory_error): Rewrite to throw a MEMORY_ERROR.
8648 * breakpoint.c (fetch_watchpoint_value): Ignore MEMORY_ERRORs, but
8649 retrow all other exceptions.
8651 For older changes see ChangeLog-2008.
8657 version-control: never
projects / deliverable / binutils-gdb.git / blob