1 Fri Jul 24 14:41:19 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
3 * tracepoint.c (encode_actions): Treat register names and simple
4 variable names as special cases and don't convert them to byte-
5 codes: these things can be collected far more efficiently
6 without invoking the bytecode interpreter.
8 Fri Jul 24 13:32:46 1998 Mark Alexander <marka@cygnus.com>
10 * config/i386/tm-i386.h (STORE_STRUCT_RETURN): Make it
11 work on hosts of any endianness.
12 * config/i386/tm-i386v.h: Ditto.
14 Fri Jul 24 07:41:12 1998 Mark Alexander <marka@cygnus.com>
16 * mn10300-tdep.c (set_movm_offsets): New helper function
17 for mn10300_analyze_prologue.
18 (mn10300_analyze_prologue): Simplify by factoring out common code.
19 Fix bugs in setting frame address for optimized code.
20 Use read_memory_nobpt instead of target_read_memory.
22 Thu Jul 23 17:01:17 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
24 * tracepoint.c (collect_symbol): handle LOC_ARG case.
26 Thu Jul 23 15:07:40 1998 Dawn Perchik <dawn@cygnus.com>
28 * sparc-tdep.c (sparc_init_extra_frame_info): Recognize when we're
29 in a function prologue before the SAVE instruction.
30 (sparc_frame_saved_pc): Ditto.
31 * config/sparc/tm-sparc.h (EXTRA_FRAME_INFO): Add in_prologue flag.
33 Thu Jul 23 14:58:09 1998 Dawn Perchik <dawn@cygnus.com>
35 * i386-tdep.c (i386_get_frame_setup): Recognize function
36 prologues in code compiled with -fcheck-stack.
38 Thu Jul 23 14:49:27 1998 Dawn Perchik <dawn@cygnus.com>
40 * remote-mips.c (remote_mips_insert_hw_breakpoint,
41 remote_mips_remove_hw_breakpoint): New functions for hardware
42 breakpoints on LSI targets.
43 * config/mips/tm-embed.h (target_remove_hw_breakpoint,
44 target_insert_hw_breakpoint): Define to call
45 remote_mips_insert_hw_breakpoint and remote_mips_remove_hw_breakpoint,
49 Thu Jul 23 13:00:28 1998 Ian Carmichael <iancarm@cygnus.com>
51 * txvu-tdep.c: (VU0_MEM0_WINDOW_START, VU1_MEM0_WINDOW_START)
52 Changed to use addresses in kseg1 range.
55 1998-07-21 Fernando Nasser <fnasser@totem.to.cygnus.com>
57 * source.c (print_source_lines): Print "No such file or directory"
59 (directory_command): same as above; resets if user issues dir.
61 Sun Jul 19 02:11:45 1998 Martin M. Hunt <hunt@cygnus.com>
63 * symtab.c (decode_line_2): Instead of printing a prompt
64 and calling command_line_input() without a prompt, just
65 call it with the proper args. This makes the GUI work too.
67 Fri Jul 17 9:26:50 1998 Ron Unrau <runrau@cygnus.com>
69 * blockframe.c (find_pc_sect_partial_function): allow for the possi-
70 bility of multiple symbols at the same address when finding high.
71 * breakpoint.c (resolve_sal_pc): if the function based section lookup
72 fails, try getting the section from the minimal symbol table.
73 * parse.c (write_exp_msymbol): use symbol_overlayed_address to get
74 the LMA of a minimal symbol if unmapped.
75 * symtab.c (find_line_symtab): change interface to return symtab
76 containing the best linetable found.
77 (decode_line_1): use find_line_symtab to set val.symtab. This should
78 improve support for source files with multiple symtabs.
80 * tm-txvu.h: include tm-mips64.h instead of starting from scratch.
83 Wed Jul 15 11:51:33 1998 Keith Seitz <keiths@cygnus.com>
85 * main.c (main): Fix violations of GNU coding standard.
87 * breakpoint.c: Export delete_command.
89 * infcmd.c: Export continue_command, stepi_command, and nexti_command.
91 * Makefile.in: Add target for v850ice.o.
93 * configure.tgt: Add cygwin32 dependencies for v850 ice.
95 Wed Jul 15 10:58:29 1998 Nick Clifton <nickc@cygnus.com>
97 * tracepoint.c (set_raw_tracepoint): Cope with symbols that do not
98 have an associated directory.
100 Mon Jul 13 15:21:04 1998 Mark Alexander <marka@cygnus.com>
102 * utils.c (puts_debug): Display non-printable characters in hex
105 Thu Jul 9 16:16:47 1998 Jeffrey A Law (law@cygnus.com)
107 * mn10300-tdep.c (mn10300_generic_register_names): New variable.
108 (set_machine_hook): New function. Copy the appropriate register
109 names into reg_names.
110 (_initialize_mn10300_tdep): Set up to call set_machine_hook.
111 * tm-mn10300 (NUM_REGS): Bump to 32.
112 (REGISTER_NAMES): Updated accordingly.
115 * mn10300-tdep.c (am33_register_names): New variable.
116 (mn10300_analyze_prologue): Handle regs saved by am33 prologues.
117 * tm-mn10300.h (E0_REGNUM): Define.
120 Tue Jul 7 7:40:13 1998 Ron Unrau <runrau@cygnus.com>
122 * symtab.c (find_pc_sect_psymbol): allow case where textlow is 0
124 Thu Jul 2 15:57:58 1998 Frank Ch. Eigler <fche@cygnus.com>
126 * breakpoint.c (resolve_sal_pc): Accept absence of innermost
127 Lexical block for breakpoint resolution.
129 Thu Jul 2 10:22:00 1998 Dawn Perchik <dawn@cygnus.com>
131 * mdebugread.c (parse_partial_symbols): Go ahead and read the .mdebug
132 section, but just don't add a 2nd minimal symbol if this is an .mdebug
133 section in an ELF file.
135 1998-07-01 Jim Blandy <jimb@zwingli.cygnus.com>
137 * Makefile.in (ax-general.o): Depend on $(defs_h) too.
138 (ax_h): Bother to define this.
140 Mon Jun 29 19:01:18 1998 Jim Wilson <wilson@cygnus.com>
142 * gnu-regex.c (re_comp): Add cast to char * before gettext calls.
144 Sun Jun 28 11:35:48 1998 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
146 Improve support for SunPro F77.
147 * dbxread.c (end_psymtab, process_one_symbol): Handle minimal
148 symbols with trailing underscore names.
149 * minsyms.c (find_stab_function_addr): Ditto.
150 * dbxread.c (process_one_symbol): Ignore N_ALIAS for now.
151 * partial-stab.h (case N_ALIAS): Ditto.
152 * stabsread.c (read_sun_builtin_type): Handle boolean types.
154 Fri Jun 26 14:03:01 1998 Keith Seitz <keiths@cygnus.com>
156 * symtab.h (enum namespace): Add new namespaces FUNCTIONS_NAMESPACE,
157 TYPES_NAMESPACE, METHODS_NAMESPACE, and VARIABLES_NAMESPACE used by
159 Add prototype for search_symbols and free_search_symbols.
161 * symtab.c (list_symbols): Rewrite to use new search_symbols.
162 (file_matches): New helper function for search_symbols.
163 (free_search_symbols): New function which frees data returned from
165 (print_symbol_info): New helper function which prints info about a
166 matched symbol to stdout. Extracted from old list_symbols.
167 (print_msymbol_info): New helper function which prints info about
168 a matched msymbol to stdout. Extracted from old list_symbols.
169 (symtab_symbol_info): Extracted from old list_symbols.
170 (variables_info): Use symtab_symbol_info.
171 (functions_info): Use symtab_symbol_info.
172 (types_info): Use symtab_symbol_info.
173 (rbreak_command): Rewrite to use new search_symbols.
175 Thu Jun 25 22:38:32 1998 Frank Ch. Eigler <fche@cygnus.com>
177 * mips-tdep.c (mips_push_arguments): Use 128-bit stack frame
178 alignment for inferior calls.
181 Wed Jun 24 23:17:12 1998 Mark Alexander <marka@cygnus.com>
183 * mn10200-tdep.c (mn10200_analyze_prologue): Fix calculation
184 of jsr target address.
186 Tue Jun 23 19:37:46 1998 Mark Alexander <marka@cygnus.com>
188 * config/mn10200/tm-mn10200.h (SAVED_PC_AFTER_CALL): Don't
189 zero upper byte of address.
191 Tue Jun 23 17:32:26 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
193 * rs6000-tdep.c (pop_dummy_frame): use memcpy.
194 (push_arguments): use memset.
195 (various other places): fix up indentation and long lines.
197 Tue Jun 23 11:58:35 1998 Jason Molenda (crash@bugshack.cygnus.com)
199 * configure.in: s/lXext/-lXext/ for Jillian's change.
201 Tue Jun 23 11:14:04 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
203 * source.c (find_source_lines): fix indentation.
205 * config/mips/tm-irix5.h: Modify to work better on irix 6, by
206 making FP registers 8 bytes instead of 4.
207 REGISTER_BYTES: redefine. REGISTER_BYTE(): redefine.
208 REGISTER_VIRTUAL_TYPE: redefine. MIPS_LAST_ARG_REGNUM: redefine.
209 * irix5-nat.c (fetch_core_registers): read 8 bytes per FP register.
210 * mips-tdep.c (FP_REGISTER_DOUBLE): new macro to distinguish
211 targets with 8-byte FP registers (don't use TARGET_MIPS64).
212 (STACK_ARGSIZE): new macro, how much space is taken up on the
213 stack for each function argument (don't use TARGET_MIPS64).
214 (mips_push_arguments): modify logic to work better on Irix 6
217 Tue Jun 23 12:29:53 1998 Jillian Ye <jillian@cygnus.com>
219 * configure.in: Add -lXext to mips_extra_libs
220 * configure: Regenerated.
222 Sun Jun 21 09:31:12 1998 Ron Unrau (runrau@cygnus.com)
224 * symtab.c (find_line_pc): assumed that a PC of 0 is illegal.
225 Changed to pass PC as arg and return 1 if valid (0 otherwise).
226 symtab.h: change prototype to match
227 symtab.c (find_line_pc_range): use new interface
228 breakpoint.c (resolve_sal_pc): ditto
229 gdbtk.c (gdb_set_bp): ditto
231 Wed Jun 17 15:50:00 1998 Ron Unrau (runrau@cygnus.com)
233 * parse.c (target_map_name_to_register): Check target specific
234 aliases *first* so that it can over-ride architectural names
236 Wed Jun 17 17:13:38 1998 Said Ziouani (saidz@park-street.cygnus.com)
238 * remote-sds.c (sds_start_remote): Fix printf call.
240 Tue Jun 16 16:32:08 1998 Mark Alexander <marka@cygnus.com>
242 * mn10200-tdep.c (mn10200_analyze_prologue): Fix null pointer
243 crash when in "start".
245 Tue Jun 16 14:38:40 1998 Ron Unrau (runrau@cygnus.com)
247 * dbxread.c: reset function_start_offset after a finishing N_FUN
249 * remote-sim.c: allow TARGET_REDEFINE_DEFAULT_OPS to override
250 target vectors as needed.
252 Sun Jun 14 08:46:25 1998 Ron Unrau (runrau@cygnus.com)
254 * partial-stab.h: 'F' and 'f' type N_FUN psymbols should pass
255 CUR_SYMBOL_VALUE as CORE_ADDR instead of long
256 * buildsym.[ch]: export pending_blocks list
258 Sat Jun 13 13:02:32 1998 Dawn Perchik (dawn@cygnus.com)
260 * remote.c : Fix remote help string to match that of help.exp.
262 Fri Jun 12 14:22:55 1998 Jason Molenda (crash@bugshack.cygnus.com)
264 * configure.in (LIBS): Add -lw to the list of libraries if needed.
266 Thu Jun 11 15:05:10 1998 Jason Molenda (crash@bugshack.cygnus.com)
269 * configure.in: Don't see if we need to replace btowc().
270 * Makefile.in: Don't include LIBOBJS.
271 * configure: Regenerated.
272 * gnu-regex.c (regex_compile): Only support i18n [:foo:] if
275 Wed Jun 10 15:39:14 1998 Stu Grossman <grossman@babylon-5.cygnus.com>
277 * c-exp.y: Fix problems with parsing "'foo.bar'::func". Some languages
278 allow symbols with dots.
280 * gdbtypes.c (check_stub_method): Cosmetic. Use more descriptive
281 names for parameters.
284 * jv-exp.y: Parser now accepts primitive types.
285 * (parse_number): Use correct ifdef for scanf long double support.
286 * jv-lang.c (java_array_type): Initial cut at array support.
289 * language.c language.h (set_language): Now returns previous language.
291 * symtab.c (find_methods): Make static. Cosmetic changes, including
292 indentation, and adding descriptive comments. Move local variable defs
293 into the block they are used in.
294 * Don't call check_stub_method any more. Use gdb_mangle_name to
295 generate the full method name. find_method doesn't need all the other
296 goobldegook that check_stub_method does.
297 * (gdb_mangle_name): Use more descriptive names for parameters. Fix
300 * (lookup_partial_symbol lookup_block_symbol): Check for java to
301 ensure we can find mangled names.
303 * (decode_line_1): Move local variable defs into the block they are
304 used in. (Improves code readability.)
306 Wed Jun 10 18:04:35 1998 Frank Ch. Eigler <fche@cygnus.com>
308 * gdbtypes.c (get_discrete_bounds): Assign unsigned type flag for
310 (create_set_type): Ditto for all-positive set values.
311 * values.c (unpack_field_as_long): Check for typedef in struct
314 Wed Jun 10 14:06:05 1998 Jason Molenda (crash@bugshack.cygnus.com)
316 * configure.in: Add some tests for gnu-regex.c's benefit.
317 See if btowc() function is provided in C library.
318 * configure, config.in: Regenerated.
319 * Makefile.in (CLIBS, CDEPS): Add @LIBOBJS@ to build btowc.c
323 * gnu-regex.c: Reorder wchar.h and wctype.h includes for Solaris'
325 Drop namespace preserving defines for now.
327 Wed Jun 10 11:53:42 1998 Jason Molenda (crash@bugshack.cygnus.com)
329 * gnu-regex.c: Include "gnu-regex.h", not "regex.h".
331 Wed Jun 10 11:34:07 1998 Jason Molenda (crash@bugshack.cygnus.com)
333 * gnu-regex.c, gnu-regex.h: Change LGPL license to GPL license
334 to stay consistent with the rest of GDB.
336 Wed Jun 10 11:27:39 1998 Jason Molenda (crash@bugshack.cygnus.com)
338 * gnu-regex.c, gnu-regex.h: Update to current FSF (glibc) versions.
340 Wed Jun 10 10:58:18 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
342 * printcmd.c (disassemble_command): move overlay mapping code
343 "up" into find_pc_partial_function.
344 * blockframe.c (find_pc_partial_function): adjust start address
345 and end address for overlays (mapped vs. unmapped addresses),
346 so that all callers of this function may benefit.
347 * m32r-tdep.c (m32r_skip_prologue): adjust indentation.
349 Mon Jun 8 16:08:10 1998 Ron Unrau <runrau@cygnus.com>
351 * objfiles.c (add_to_objfile_sections): All targets to define
352 TARGET_KEEP_SECTION to permit them to retain bfd sections that
353 GDB would otherwise have discarded.
355 Fri Jun 5 13:56:19 1998 Doug Evans <devans@canuck.cygnus.com>
357 * dbxread.c (read_dbx_symtab): Don't lower texthigh for last psymtab.
359 Thu Jun 4 18:35:04 1998 Stan Shebs <shebs@andros.cygnus.com>
361 * remote.c (init_extended_remote_ops): Make extended_remote_ops
362 by copying from remote_ops, move it and init_remote_ops to
363 usual place at end of file, remove "void" from arg lists.
365 Thu Jun 4 17:51:06 1998 Mark Alexander <marka@cygnus.com>
367 * sparc-tdep.c (sparc_fix_call_dummy): Byte-swap the call dummy
368 on bi-endian machines.
369 (sparc_extract_return_value): Handle values smaller than int on
370 machines with little-endian data.
371 (sparc_target_architecture_hook): Set bi_endian flag.
373 Thu Jun 4 12:14:48 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
375 * printcmd.c (disassemble_command): Fix off-by-one error for
376 disassembling functions in unmapped overlay sections.
378 Thu Jun 4 10:15:03 1998 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
382 - Jim Blandy <jimb@zwingli.cygnus.com>
383 (print_packet, remote_packet_command): New functions.
384 (_initialize_remote): Register the remote-packet command.
385 - David Taylor <taylor@texas.cygnus.com>
386 (_initialize_remote): remote-compare is now
388 - Elena Zannoni <ezannoni@kwikemart.cygnus.com>
389 (remote_compare_command): added warning, issued in case
392 Thu Jun 4 08:25:38 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
394 * remote.c (remote_compare_command): New function, new command.
395 Compare object file binary image with corresponding memory on
396 remote target. Report differences.
398 Tue Jun 2 19:05:04 1998 Mark Alexander <marka@cygnus.com>
400 * sparc-tdep.c (sparc_target_architecture_hook): Set target
401 byte order only when it's selectable.
403 Tue Jun 2 02:01:56 1998 Mark Alexander <marka@cygnus.com>
405 * sparc-tdep.c (sparc_target_architecture_hook): New function to
406 set endianness based on machine type.
407 (_initialize_sparc_tdep): Initialize target_architecture_hook.
408 (sparc_print_register_hook): Print PSR and FPSR in fancy format
410 * config/sparc/tm-sparc.h (PRINT_REGISTER_HOOK): Redefine to
411 call sparc_print_register_hook instead of using inline code.
412 * config/sparc/tm-sp64.h (PRINT_REGISTER_HOOK): Remove.
414 Thu May 28 17:19:14 1998 Keith Seitz <keiths@cygnus.com>
416 * main.c (main): Check for NULL from getenv on CYGWIN32.
418 Thu May 28 09:41:44 1998 Nick Clifton <nickc@cygnus.com>
420 * monitor.c (monitor_vsprintf): Handle %%. Patch courtesy of
421 Felix Lee (flee@cygnus.com)
423 Thu May 28 00:27:35 1998 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
425 * mips-tdep.c (mips_push_dummy_frame): Fix calculation of
426 PROC_REG_OFFSET and PROC_FREG_OFFSET.
428 Mon Apr 27 14:37:49 1998 Andrew Cagney <cagney@b1.cygnus.com>
430 * config/v850/tm-v850.h (REGISTER_BYTE): FP_REGNUM and
431 FP_RAW_REGNUM use the same register location.
433 * v850-tdep.c (v850_scan_prologue): Use FP_RAW_REGNUM instead of
435 (v850_frame_chain): Ditto.
437 * config/v850/tm-v850.h (REGISTER_NAMES): Add "fp".
440 (FP_RAW_REGNUM): Define.
442 Wed May 27 14:22:31 1998 Keith Seitz <keiths@cygnus.com>
444 * main.c (main): Convert the path returned from getenv to a posix
445 path on cygwin32 hosts.
447 Mon May 25 13:31:27 1998 Keith Seitz <keiths@cygnus.com>
449 * remote.c (remote_open_1): If an error occurs starting the remote,
450 pop the target AND return.
452 Sat May 23 02:23:09 1998 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
454 * dwarf2read.c (read_subroutine_type): Set TYPE_FLAG_PROTOTYPED
456 * valops.c (value_arg_coerce): Add new argument to indicate whether
457 the function has a prototype, handle integer and float promotions
459 (call_function_by_hand): Always call value_arg_coerce, pass down
460 prototype information.
462 Fri May 22 10:56:36 1998 John Metzler <jmetzler@cygnus.com>
464 * remote.c (_initialize_remote): Typo extended__remote
466 Thu May 21 13:14:25 1998 John Metzler <jmetzler@cygnus.com>
468 * gnu-nat.c (init_gnu_ops): Initialization of target ops by assignment.
469 (_initialize_gnu_nat): Call new init
470 * mac-nat.c (init_child_ops): Ditto.
471 (_initialize_mac_nat): Ditto.
472 * monitor.c (init_base_monitor_ops): Ditto.
473 (_initialize_remote_monitors): Ditto.
474 * ppc-bdm.c (init_bdm_ppc_ops): Ditto.
475 (_initialize_bdm_ppc): Ditto.
476 * remote-adapt.c (init_adapt_ops): Ditto.
477 (_initialize_remote_adapt): Ditto.
478 * remote-array.c (init_array_ops): Ditto.
479 (_initialize_array): Ditto.
480 * remote-bug (init_bug_ops): Ditto.
481 (_initialize_remote_bug): Ditto.
482 * remote-e7000.c (init_e7000_ops): Ditto.
483 (_initialize_remote_e7000): Ditto.
484 * remote-eb.c (init_eb_ops): Ditto.
485 (_initialize_remote_eb): Ditto.
486 * remote-es.c (init_es1800_ops): Ditto.
487 (init_es1800_child_ops): Ditto.
488 (_initialize_es1800): Ditto.
489 * remote-hms.c (init_hms_ops): Ditto.
490 (_initialize_remote_hms): Ditto.
491 * remote-mm.c (init_mm_ops): Ditto.
492 (_initialize_remote_mm): Ditto.
493 * remote-nindy.c (init_nindy_ops): Ditto.
494 (_initialize_nindy): Ditto.
495 * remote_nrom.c (init_nrom_ops): Ditto.
496 (_initialize_remote_nrom): Ditto.
497 * remote-os9k (init_rombug_ops): Ditto.
498 (_initialize_remote_os9k): Ditto.
499 * remote-rdi.c (init_rdi_ops): Ditto.
500 (_initialize_remote_rdi): Ditto.
501 * remote-rdp.c (init_remote_rdp_ops): Ditto.
502 (_initialize_remote_rdp): Ditto.
503 * remote-sds.c (init_sds_ops): Ditto.
504 (_initialize_remote_sds): Ditto.
505 * remote-sim.c (init_gdbsim_ops): Ditto.
506 (_initialize_remote_sim): Ditto.
507 * remote-st.c (init_st2000_ops): Ditto.
508 (_initialize_remote_st2000): Ditto.
509 * remote-udi.c (init_udi_ops): Ditto.
510 (_initialize_remote_udi): Ditto.
511 * remote-vx.c (init_vx_ops): Ditto.
512 (init_vx_run_ops): Ditto.
513 (_initialize_vx): Ditto.
514 * remote.c (init_remote_ops): Ditto.
515 (init_extended_remote_ops): Ditto.
516 (_initialize_remote): Ditto.
517 * sparcl-tdep.c (init_sparclite_ops): Ditto.
518 (_initialize_sparcl_tdep): Ditto.
519 * v850ice.c (init_850ice_ops): Ditto.
520 (_initialize_v850ice): Ditto.
521 * win32-nat.c: (init_child_ops): Ditto.
522 (_initialize_inftarg): Ditto.
524 1998-05-21 Jim Blandy <jimb@zwingli.cygnus.com>
526 * ax-gdb.c (const_var_ref): Don't handle function names. I don't
527 want to implement all the "usual unary conversion" rules for
529 (gen_usual_unary): Turn "function" values into "pointer to
530 function" values, in accordance with ANSI.
531 (gen_deref): Don't do the usual unary conversions here. Let the
532 caller do it. Note that dereferencing a function pointer yields
533 a function designator, which we call an rvalue, not an lvalue.
534 (gen_address_of): Handle functions specially.
535 (gen_struct_ref): Perform the usual unary conversions before
537 (gen_expr): In case for the prefix '*' operator, call
538 gen_usual_unary manually.
540 Wed May 20 15:29:41 1998 Gavin Koch <gavin@cygnus.com>
542 * mips/tm-tx39.h (MIPS_DEFAULT_FPU_TYPE): Defined as MIPS_FPU_NONE.
543 * mips/tm-tx39l.h: Same.
545 Wed May 20 10:12:11 1998 John Metzler <jmetzler@cygnus.com>
547 * m32r-tdep.c: (decode_prologue): Handle frames compiled with -Os.
548 Split out as separate function called by skip prologue and scan
549 prologue. new formula handles optimization in which the prologue
550 is interleaved with the body of the function. Also recognizes new
551 variations of prologue encoding. Use of frame pointer is
552 essential to debugging, -fno-omit-frame-pointer
553 (m32r_skip_prologue): Call decode prologue, ignore line info
554 (m32r_scan_prologue): Call decode prologue, ignore line info.
556 Tue May 19 17:23:54 1998 John Metzler <jmetzler@cygnus.com>
558 * w89k-rom.c (_initialize_w89k): Call new init function
559 (init_w89k_cmds): Convert to dynamic initialization of monitor_ops
560 data structure for forward compatability with additions to the
562 * dbug-rom.c (_initialize_dbug_rom): ditto
563 (init_dbug_cmds): ditto
564 * m32r-rom.c (_initialize_m32r_rom): ditto
565 (init_m32r_cmds): ditto
567 Tue May 19 14:54:11 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
569 * tracepoint.c (memrange_cmp): use const void * args to avoid
570 ANSI compiler warnings.
572 1998-05-19 Jim Blandy <jimb@zwingli.cygnus.com>
574 * ax-gdb.c (gen_fetch, gen_var_ref, gen_deref, find_field,
575 gen_bitfield_ref, gen_expr): Call error, not abort.
576 * ax-general.c (read_const, generic_ext, ax_trace_quick,
577 ax_label, ax_const_d, ax_reg, ax_print): Same.
579 * tracepoint.c: Remove the $(...) syntax for memranges.
580 (validate_actionline, encode_actions, trace_dump_command): Remove
581 clauses for the $(...) syntax.
582 (parse_and_eval_memrange): Function deleted.
583 (_initialize_tracepoint): Update function description.
585 * gdbtk.c (struct wrapped_call_objs): Change the `func' member to
586 be a Tcl_ObjCmdProc, not an Tcl_CmdProc, since it accepts a vector
587 of objects as arguments. Change the object vector to be const,
588 since that's what all the users of this structure seem to expect.
589 (call_obj_wrapper): Cast clientData properly before storing it in
590 the wrapped_args structure.
592 * ax-gdb.c (_initialize_ax_gdb): Make the "agent" command a
593 subcommand of "maintenance", as it should have been from the
594 beginning. #include "gdbcmd.h", to get the declaration for
596 * Makefile.in: Document that dependency.
598 Tue May 19 12:00:58 1998 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
600 * tracepoint.c (get_tracepoint_by_number): new function, to access
601 traceframe_number for use of the GUI.
603 * tracepoint.h: added prototype for get_traceframe_number.
605 Mon May 18 13:34:27 1998 Keith Seitz <keiths@cygnus.com>
607 * dbxread.c (process_one_symbol): If block addresses are relative to
608 function start addresses, reset function_start_address whenever a new
611 Mon May 18 13:04:27 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
613 * tracepoint.c (get_tracepoint_by_number): make sure to advance
614 arg pointer even if we fail to parse a useful number. Otherwise,
615 since this function is called in a loop, it may loop forever!
616 Also change strtol call to allow arbitrary radix.
617 (map_args_over_tracepoints (and other places)): add QUIT; call
618 to loop, to allow breakout using control-C. Not all loops were
619 analyzed to make sure they could terminate cleanly, but even
620 terminating with a messed-up tracepoint list would be better
621 than not terminating at all!
622 (tdump_command): check to see if we're connected to a trace-
623 capable target (currently only "remote") before doing anything
626 Sat May 16 22:21:48 1998 Frank Ch. Eigler <fche@cygnus.com>
628 * config/d30v/tm-d30v.h (INIT_FRAME_PC_FIRST): Fill in PC into
629 frame struct before extracting saved register offsets.
631 Fri May 15 22:47:45 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
633 * tracepoint.c (encode_actions): fix typo in printf format string.
635 1998-05-15 Jim Blandy <jimb@zwingli.cygnus.com>
637 Implement a few more tracing operators: ^ | & ~ !
638 * ax-gdb.c (gen_integral_promotions, gen_logical_not,
639 gen_complement): New functions.
640 (gen_binop): New argument MAY_CARRY, indicating whether we need to
641 correct the upper bits of the value after performing the
642 operation. Callers changed.
643 (gen_expr): Handle BINOP_BITWISE_AND, BINOP_BITWISE_IOR, and
644 BINOP_BITWISE_XOR here as well, by calling gen_binop. Handle
645 UNOP_LOGICAL_NOT, UNOP_COMPLEMENT.
647 * ax-gdb.c (gen_conversion): Reworked to avoid some unnecessary
650 * ax-gdb.c (gen_usual_arithmetic): Renamed from gen_usual_binary,
651 to match the ANSI C standard better. Callers changed.
653 * ax-gdb.c (gen_traced_pop): Add prototyped declaration.
655 Fri May 15 18:18:38 1998 David Taylor <taylor@texas.cygnus.com>
657 * tracepoint.c (stringify_collections_list): return a collection
658 of strings rather than a single string.
659 (free_actions_list): new function.
660 (encode_actions): process collection of strings returned by
661 stringify_collections_list.
663 1998-05-15 Jim Blandy <jimb@zwingli.cygnus.com>
665 * ax-gdb.c (gen_traced_pop): New function.
666 (gen_expr): Call it for comma operator.
667 (gen_trace_for_expr): Call it, instead of writing it out.
669 Add facilities for sending arbitrary packets to the remote agent.
670 There are a bunch of improvements to make (make it generic; handle
671 'O' replies properly), but I just want to get this onto the branch.
672 * remote.c (print_packet, remote_packet_command): New functions.
673 (_initialize_remote): Register the remote-packet command.
675 Thu May 14 17:52:31 1998 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
677 * tracepoint.c: move actionline_type definition to tracepoint.h.
678 (validate_actionline): make non static.
680 * tracepoint.h: move actioline_type definition from tracepoint.c.
681 (validate_actionline) moved prototype from tracepoint.c.
683 Thu May 14 11:49:18 1998 David Taylor <taylor@texas.cygnus.com>
685 * tracepoint.c (validate_actionline): add additional error
686 checking, remove some dead code.
687 (encode_actions): additional cleanups.
688 (trace_find_command): remove some dead code.
689 (trace_find_pc_command): ditto.
690 (trace_find_tracepoint_command): ditto.
691 (trace_find_line_command): ditto.
692 (trace_find_range_command): ditto.
693 (trace_find_outside_command): ditto.
695 Thu May 14 5:51:00 1998 Ron Unrau <runrau@cygnus.com>
697 * symtab.c (decode_line_1): set section for "break *<addr>"
699 Wed May 13 20:58:02 1998 Mark Alexander <marka@cygnus.com>
701 * corefile.c (reopen_exec_file): Reopen the exec file if
704 Wed May 13 15:22:02 1998 Mark Alexander <marka@cygnus.com>
706 * sparc-tdep.c (fetch_instruction): New function.
707 (single_step, sparc_init_extra_frame_info, examine_prologue):
708 Use fetch_instruction instead of read_memory_integer
709 to ensure that instructions are always read as big-endian.
711 Wed May 13 14:42:21 1998 Ian Lance Taylor <ian@cygnus.com>
713 * configure.in: Add AC_FUNC_ALLOCA.
714 * defs.h: Check HAVE_ALLOCA_H rather than sparc. Add _AIX pragma
716 * configure: Rebuild.
718 * Makefile.in (jv-lang.o, jv-typeprint.o, jv-valprint.o): New
722 Wed May 13 11:19:08 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
724 * tracepoint.c (trace_command): Remove old diagnostic code that was
725 preventing tracepoints from being defined with a full-path filename.
727 Tue May 12 13:17:35 1998 Frank Ch. Eigler <fche@cygnus.com>
729 * stabsread.c (read_one_struct_field): Check for typedef in type
730 tree before clearing bitfield information.
732 1998-05-11 Jim Blandy <jimb@zwingli.cygnus.com>
734 * ax-gdb.c (gen_binop): New function, based on gen_mul, to replace
735 gen_mul and gen_div, and handle `%' op as well. Correctly tests
737 (gen_expr): Factor out common code in binary arithmetic operators.
739 (gen_mul, gen_div): Removed.
741 Thu May 7 14:49:38 1998 Bob Manson <manson@charmed.cygnus.com>
743 * config/sparc/tm-sp64.h (CALL_DUMMY): Store and retrieve
744 %o0-%o5 as 64-bit values; compensate for stack bias.
745 (USE_STRUCT_CONVENTION): We only pass pointers to structs
746 if they're larger than 32 bytes.
747 (REG_STRUCT_HAS_ADDR): Ditto.
749 * sparc-tdep.c (sparc_init_extra_frame_info): Use read_sp()
750 instead of read_register. If the target is a sparc64 and the frame
751 pointer is odd, compensate for the stack bias.
752 (get_saved_register): Use read_sp().
753 (DUMMY_STACK_REG_BUF_SIZE): Use FP_REGISTER_BYTES.
754 (sparc_push_dummy_frame): Use read_sp()/write_sp(). On sparc64,
755 save the PC, NPC, CCR, FSR, FPRS, Y and ASI registers.
756 (sparc_frame_find_saved_regs): Use read_sp(). Read the PC, NPC,
757 CCR, FSR, FPRS, Y and ASI registers from the frame, if it's a
759 (sparc_pop_frame): Use write_sp(). If the target is a sparc64 and
760 the FP is odd, compensate for stack bias.
761 (sparc_store_return_value): Right-justify the return value before
763 (sparc_fix_call_dummy): Don't NOP out part of the call dummy on
765 (sparc64_read_sp, sparc64_read_fp, sparc64_write_sp,
766 sparc64_write_fp, sp64_push_arguments,
767 sparc64_extract_return_value): New functions to support the
770 * dwarfread.c (handle_producer): Set processing_gcc_compilation to
771 the right version number.
773 * dwarf2read.c (read_file_scope): Assume we're processing
776 Wed May 6 16:34:03 1998 Jeffrey A Law (law@cygnus.com)
778 * somsolib.c: Include gdb_stat.h.
780 Mon May 4 18:34:01 1998 David Taylor <taylor@texas.cygnus.com>
782 * ax-gdb.c (gen_mul): new function; (gen_div): new function;
783 (gen_expr): add support for * and / operators, call gen_mul and
784 gen_div as appropriate.
786 Mon May 4 16:24:22 1998 Mark Alexander <marka@cygnus.com>
788 * defs.h (make_run_cleanup): Declare.
789 * solib.c (find_solib): Pass correct number of arguments to
792 Mon May 4 07:08:25 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
794 * tracepoint.c (trace_actions_command): actions command must set
795 step_count to zero (in case previous actions have set it but the
798 Sat May 2 09:35:07 1998 Stu Grossman <grossman@babylon-5.cygnus.com>
800 * ocd.h: Add new flags, function codes, and processor types to support
801 new Wiggler capabilities.
802 * (ocd_write_bytes_size): New function to allow atomic writes of
803 memory in sizes larger than a byte.
805 * ser-unix.c (baudtab): Add 57600, 115200, 230400, and 460800 baud.
807 Fri May 1 19:51:32 1998 Frank Ch. Eigler <fche@cygnus.com>
809 * stabsread.c (read_one_struct_field): Do not override supplied
810 bitfield size for a range type value.
812 * gdbtypes.c (create_range_type): For a range with positive
813 lower limit, declare range type as unsigned.
815 Fri May 1 10:58:34 1998 John Metzler <jmetzler@cygnus.com>
817 * monitor.c: Turn off debug
819 Fri May 1 09:29:56 1998 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
821 * breakpoint.c (delete_command): Skip internal breakpoints when
822 all breakpoints are requested.
824 * stabsread.c (define_symbol): Record parameter types from Sunpro
825 function stabs in the TYPE_FIELDS of the function type.
827 Thu Apr 30 15:59:54 1998 Jason Molenda (crash@bugshack.cygnus.com)
829 * Makefile.in (config-check-targets, config-check-hosts): Removed.
831 1998-04-30 Paul Eggert <eggert@twinsun.com>
833 * Makefile.in (maintainer-clean):
834 Don't get ahead of yourself and delete Makefile
835 before running `make'.
836 (local-maintainer-clean, do-maintainer-clean): New rules.
838 Wed Apr 29 14:02:59 1998 David Taylor <taylor@texas.cygnus.com>
840 * ax-gdb.c (gen_add): when adding a pointer and an int, use
841 the size of the pointer, not the int (typo) to decide how
842 to extend the result.
844 Wed Apr 29 10:20:40 1998 John Metzler <jmetzler@cygnus.com>
845 start-sanitize-vr4111
847 * nec4102rom.c: New file implements ROM monitor adapter for
848 nec-vr4102 board. This board hosts the vr4111 chip. This file
849 required extensions to the monitor_ops structure, hooks for wait
850 filter, new flags. This version does not support more than one
851 breakpoint and resuming after a breakpoint in 16 bit mode is
852 completely disfunctional.
855 * monitor.h: Defined additional hooks for dmpregs, configure_hooks
856 and wait_filter. These additions require that all ROM monitor
857 interfaces be recoded to initialize monitor ops using assignments
858 rather than static structure initialization. Added new bits to
859 flags MO_EXACT_DUMPADDR, MO_HAS_BLOCKWRITES.
861 * monitor.c (RDEBUG): Conditional tracing throughout the file.
862 (fromhex): Now recognized upper cse hex digits
863 (monitor_printf_noecho):
864 (monitor_readchar): Tracing interferes with input timing.
865 (monitor_open): Register different memory write functions with
866 dcache_init if MO_HAS_BLOCKWRITES.
867 (flush_monior_dcache): Added as an additional utilty.
868 (monitor-resume): Call continue hook if one has been supplied.
869 (monitor_wait_filter): New function Factored out of monitor wait
870 and used if alternate wait-filter has not been provided.
871 (monitor_wait): call alternate wait filter if provided. Call
872 monitor_dump_regs, a new function factored out from inline code.
873 (monitor_dump_block): A new function used as a utility when
874 monitors must dump several blocks of registers using different
876 (monitor_dump_regs): Call alternate function if provided. Uses new
878 (monitor_write_memory): Engage previouly added hook
880 (monitor_write_even_block): new function supports writing long
881 blocks of 4byte words.
882 (longlongendswap): new internal function
883 (monitor_write_memory_longlongs): new function writes large blocks
884 using command to enter a long long.
885 (monitor_write-memory_block): new Function figures out which block
887 (monitor_read_memory): Can now handle dump formats in which the bytes
888 preceeding the requested data is not printed.
890 Tue Apr 28 19:41:33 1998 Tom Tromey <tromey@cygnus.com>
892 * Makefile.in (GDBTKLIBS): New macro.
893 (INSTALLED_LIBS): Include GDBTKLIBS.
895 * configure: Rebuilt.
896 * configure.in: Put Tcl/Tk libs into GDBTKLIBS, not LIBS.
897 (GDBTKLIBS): AC_SUBST.
899 * tracepoint.c (memrange_cmp): Another typo fix; `memrbnge' ->
902 * tracepoint.c (memrange_cmp): Fixed typo in function intro.
904 Tue Apr 28 17:41:20 1998 Philippe De Muyter <phdm@macqel.be>
906 * symfile.c (overlay_auto_command): Add forgotten parameter definitions.
907 (overlay_manual_command, overlay_off_command): Likewise.
908 (overlay_load_command): Likewise.
909 * tracepoint.c (memrange_cmp): Parameters have type void *, not
912 Tue Apr 28 11:08:25 1998 John Metzler <jmetzler@cygnus.com>
914 * rom68k-rom.c (_initialize_rom68k): Fix unresolved init_rom_68kcmds.
916 Mon Apr 27 14:32:21 1998 Mark Alexander <marka@cygnus.com>
918 * config/sparc/tm-sparc.h (CALL_DUMMY): Shorten it drastically,
919 make it work on the simulator.
920 (FIX_CALL_DUMMY): Convert to function call instead of inline code.
921 (sparc_fix_call_dummy): Declare.
922 * sparc-tdep.c (sparc_fix_call_dummy): New function, taken from
923 old FIX_CALL_DUMMY macro, with additional fixes for simulator.
924 (sparc_push_dummy_frame): Set registers differently on simulator
925 to prevent corrupted register window save areas.
927 Mon Apr 27 13:46:40 1998 John Metzler <jmetzler@cygnus.com>
929 * rom68k-rom.c (_initialize_rom68k, init_rom68k_cmds):
930 Convert all static initializations of monitor ops structures to
931 executable initializations in order that additions to the data
932 structure definition can me made without repeating this editing
934 * abug-rom.c (_initialize_abug_rom, init_abug-cmds): Ditto.
935 * cpu32bug-rom.c (_initialize_cpu32bug_rom, init_cpu32bug_cmds): Ditto.
936 * mon960-rom.c (initialize_mon960, init_mon960_cmds): Ditto.
937 * op50-rom.c (initialize_op50n, init_op50n_cmds): Ditto.
938 * ppcbug-rom.c (_initialize_ppcbug_rom, init_ppc_cmds): Ditto.
939 * sh3-rom.c (_initialize_sh3_rom, init_sh3_cmds): Ditto.
940 * sparclet-rom.c (_initialize_sparclet, init_sparclet_cmds): Ditto.
941 * remote-est.c (_initialize_est, init_est_cmds): Ditto.
942 * remote-hms.c ( _initialize_remote_hms, init_hms_cmds): Ditto.
944 Mon Apr 27 10:43:04 1998 Jason Molenda (crash@bugshack.cygnus.com)
946 * gdb_string.h (strdup): Don't specify arguments in prototype.
948 Sun Apr 26 07:57:21 1998 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
950 * rs6000-nat.c (vmap_ldinfo): Issue warning instead of error if
951 fstat on ldinfo_fd fails. Use objfile->obfd instead of vp->bfd
952 to check for reference to the same file.
954 * target.c (target_read_string): Handle string transfers at the
955 end of a memory section gracefully.
957 Fri Apr 24 17:18:56 1998 Geoffrey Noer <noer@cygnus.com>
959 * Makefile.in: enable EXEEXT setting
961 Fri Apr 24 11:53:49 1998 David Taylor <taylor@texas.cygnus.com>
963 * tracepoint.c (add_local_symbols): change type of type from
964 char to int so that type shows up as 'A' or 'L' not 0.
967 Fri Apr 24 11:25:07 1998 Jeffrey A Law (law@cygnus.com)
969 * mips-tdep.c (mips32_decode_reg_save): Handle 128bit wide
970 GPR loads/stores generated on the r5900.
971 (mips_find_saved_regs, mips32_skip_prologue): Likewise.
972 * mips/tm-r5900.h (R5900_128BIT_GPR_HACK): Define.
973 * mips/tm-txvu.h (R5900_128BIT_GPR_HACK): Likewise.
976 Thu Apr 23 16:37:20 1998 Jason Molenda (crash@bugshack.cygnus.com)
978 * README: Minor changes for 4.17 release.
981 Thu Apr 23 15:44:39 1998 Per Bothner <bothner@cygnus.com>
983 * symfile.c (deduce_language_from_filename): .class implies java.
986 Thu Apr 23 12:52:21 1998 Philippe De Muyter <phdm@macqel.be>
988 * configure.in (strerror): Check if function must be declared.
989 * acconfig.h (NEED_DECLARATION_STRERROR): New define slot.
990 * gdb_string.h (strerror): Function declaration issued if
991 NEED_DECLARATION_STRERROR.
992 * configure, config.in : Files regenerated.
994 Thu Apr 23 12:27:43 1998 Philippe De Muyter <phdm@macqel.be>
996 * symfile.c (simple_overlay_update_1): Do not prefix array address
998 * bcache.h (BCACHE_DATA_ALIGNMENT): Ditto.
999 * tracepoint.c (encode_actions): Ditto.
1000 * language.c, complaints.c, utils.c (varargs.h): Do not include that
1001 file here, it is already included indirectly by defs.h.
1002 * dbxread.c (dbx_symfile_init, process_one_symbol): Cast xmalloc return
1003 value to the appropriate pointer type.
1004 * utils.c (floatformat_from_doublest): Ditto.
1005 * tracepoint.c (read_actions, _initialize_tracepoint): Ditto.
1006 (add_memrange): Likewise with xrealloc return value.
1007 * stabsread.c (ref_add): Ditto.
1008 * coffread.c (coff_symfile_init): Likewise for xmmalloc return value.
1009 * elfread.c (elf_symfile_read): Ditto.
1010 * os9kread.c (os9k_symfile_init): Ditto.
1012 Thu Apr 23 00:32:08 1998 Tom Tromey <tromey@cygnus.com>
1014 * config.in: Rebuilt.
1015 * acconfig.h (ENABLE_NLS, HAVE_CATGETS, HAVE_STPCPY, HAVE_GETTEXT,
1016 HAVE_LC_MESSAGES): Define.
1018 Wed Apr 22 15:38:56 1998 Tom Tromey <tromey@cygnus.com>
1020 * configure: Rebuilt.
1021 * configure.in: Call CY_GNU_GETTEXT.
1022 * Makefile.in (top_builddir): New macro.
1023 (INTL): Define to @INTLLIBS@.
1024 (INTL_DEPS): New macro.
1025 (CDEPS): Reference INTL_DEPS, not INTL.
1028 Wed Apr 22 13:40:16 1998 Doug Evans <devans@canuck.cygnus.com>
1030 * txvu-tdep.c (txvu_print_insn): Fix thinko.
1033 Wed Apr 22 12:58:23 1998 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1035 Handle missing shared libraries during the examination of a core
1037 * solib.c (find_solib): Use catch_errors around call to
1038 solib_map_sections. Use warning instead of error if reading of
1039 the shared library name fails.
1040 (solib_map_sections): Change return and argument types to make
1041 it callable from catch_errors.
1042 (symbol_add_stub): Avoid GDB core dump if solib->abfd is NULL.
1043 * irix5-nat.c, osfsolib.c (xfer_link_map_member, solib_map_sections,
1044 symbol_add_stub): Ditto.
1046 Wed Apr 22 14:34:49 1998 Michael Meissner <meissner@cygnus.com>
1048 * Makefile.in (INTL*): Add support to link in the intl library,
1049 and to add -I options to its source and object directories.
1050 (INTERNAL_CFLAGS): Ditto.
1051 (C{LIBS,DEPS}): Ditto.
1054 Wed Tue 21 17:29:48 1998 Jim Lemke <jlemke@cygnus.com>
1055 * configure.in: Add configure option --with-sim-funit.
1058 Tue Apr 21 11:20:54 1998 Frank Ch. Eigler <fche@cygnus.com>
1060 * mips-tdep.c (gdb_print_insn_mips): Disassemble MIPS instructions
1061 with subtarget-specific `mach', rather than fixed default.
1062 * config/mips/tm-mips.h (TM_PRINT_INSN_MACH): New macro, default
1064 start-sanitize-r5900
1065 * config/mips/tm-r5900.h (TM_PRINT_INSN_MACH): Override.
1068 * config/mips/tm-txvu.h (TM_PRINT_INSN_MACH): Override.
1071 Mon Apr 20 15:35:03 1998 Philippe De Muyter <phdm@macqel.be>
1073 * coffread.c (decode_base_type): Treat a long field with size greater
1074 than TARGET_LONG_BIT as long long.
1075 * values.c (value_from_longest): Print code value in error message.
1077 Mon Apr 20 15:32:21 1998 Mark Kettenis <kettenis@phys.uva.nl>
1079 * gdb/gdb_string.h (strdup): Declare only if not defined as a
1082 Mon Apr 20 14:18:45 1998 J. Kean Johnston <jkj@sco.com>
1084 * procfs.c: Added replacement macros for LWP stuff. Fixed support
1085 for UnixWare / SVR4.2MP targets and any targets which use
1086 multi-file /proc entries. Fixed support for hardware watchpoints.
1087 * solib.c: SCO needs some of the same code as SunOS. Change
1088 preprocessor conditionals.
1090 * config/i386/i386sco5.mt: New file.
1091 * config/i386/tm-i386sco5.h: New file.
1092 * config/i386/i386sco5.mh (NATDEPFILES): add i386v-nat.o.
1093 * config/i386/nm-i386v42mp.h
1094 (TARGET_HAS_HARDWARE_WATCHPOINTS): define.
1095 Add other macros for hardware assisted watchpoints.
1096 * config/i386/nm-i386sco5.h: Correct attributions.
1097 (TARGET_HAS_HARDWARE_WATCHPOINTS): define.
1098 * config/i386/nm-linux.h (target_remote_watchpoint): Pass
1099 'type' through to i386_insert_watchpoint.
1101 Mon Apr 20 14:12:30 1998 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1103 * infrun.c (wait_for_inferior): Don't add signalled processes
1105 * procfs.c (wait_fd): Note if LWP has exited.
1106 (procfs_wait): use GETPID to get process ID.
1108 Sat Apr 18 15:21:04 1998 Stan Cox <scox@cygnus.com>
1110 * configure.tgt: Added sparc86x support.
1112 Thu Apr 16 13:13:24 1998 Jason Molenda (crash@bugshack.cygnus.com)
1114 * rdi-share/etherdrv.c (EthernetWrite): Use strerror to get
1115 error string if in an ANSI C-ish environment.
1117 Wed Apr 15 18:59:48 1998 Mark Alexander <marka@cygnus.com>
1119 * sparc-tdep.c (SPARC_HAS_FPU): Define.
1120 (sparc_extract_return_value): New function, required to handle
1121 machines without floating point.
1122 (sparc_store_return_value): Ditto.
1123 * config/sparc/tm-sparc.h (EXTRACT_RETURN_VALUE): Call
1124 sparc_extract_return_value instead of using inline code.
1125 (sparc_extract_return_value): Declare.
1126 (STORE_RETURN_VALUE): Call sparc_store_return_value instead
1127 of using inline code.
1128 (sparc_store_return_value): Declare.
1130 Wed Apr 15 12:19:42 1998 Martin M. Hunt <hunt@cygnus.com>
1132 * solib.c (enable_break): Only call warning once
1133 instead of three times.
1135 Tue Apr 14 16:52:59 1998 Mark Alexander <marka@cygnus.com>
1137 * sparc-tdep.c (sparc_extract_struct_value_address): Make it
1138 work correctly on little-endian hosts.
1139 (sparc_push_arguments): New function.
1140 (gdb_print_insn_sparc): New function.
1141 (_initialize_sparc_tdep): Make gdb_print_insn_sparc the default
1142 disassembler, so that SPARClite-specific instructions will
1144 * sparcl-tdep.c (readchar): Print debugging information.
1145 (debug_serial_write): New function, a replacement for SERIAL_WRITE
1146 that prints debugging information.
1147 * config/sparc/tm-sparc.h (PUSH_ARGUMENTS): Define.
1148 (sparc_push_arguments): Declare.
1150 Tue Apr 14 15:43:49 1998 John Metzler <jmetzler@cygnus.com>
1152 * gdbcfgxref (xref_menu): Call new regex and wild card searches
1153 Now you can type in a specific triple like mips64-vr4300-elf or
1154 somthing like mips*.h
1155 (triple_search) wildcardsearch): The new functions
1157 start-sanitize-vr4320
1158 * configure.tgt: Switch over to use tm-4320.h. Since I switched to
1159 MIPS EABI the fixes are no longer backward compatible with 4300.
1160 * tm-vr4320.h: Added
1164 Mon Apr 13 16:28:07 1998 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
1166 * utils.c: (warning) added call to warning_hook
1168 * source.c: (find_source_lines) modified to call warning in case
1169 of source vs. executable time stamp mismatch. Simplified object
1170 file check. Initialized mtime to 0.
1172 * defs.h: added warning_hook prototype
1174 * top.c: added warning_hook prototype.
1176 Mon Apr 13 09:54:08 1998 Keith Seitz <keiths@andros.cygnus.com>
1178 * config/sparc/tm-sun4os4.h (IS_STATIC_TRANSFORM_NAME): Add missing
1181 Fri Apr 10 22:36:28 1998 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1183 Update support for x86 Solaris 2.
1184 * config/i386/tm-i386sol2.h, nm-i386sol2.h: New configuration
1185 files for x86 Solaris 2.
1186 * config/i386/i386sol2.mt, i386sol2.mh: Use them.
1187 * config/sparc/tm-sun4sol2.h (PROCFS_GET_CARRY): New macro, extract
1188 carry flag from a given regset.
1189 (IS_STATIC_TRANSFORM_NAME): New macro, check if a symbol name
1190 is a SunPro transformed name.
1191 * i386-tdep.c (sunpro_static_transform_name): New function to
1192 extract the source name from a SunPro transformed name.
1193 * inferior.h (procfs_first_available, procfs_get_pid_fd):
1195 * infrun.c (wait_for_inferior): Handle breakpoint hit in
1196 signal handler without intervening stop in sigtramp.
1197 * procfs.c (procfs_lwp_creation_handler): Use PROCFS_GET_CARRY
1198 instead of direct access to the status register.
1199 (procfs_get_pid_fd): New function, returns procfs fd for a given pid.
1200 * sol-thread.c (ps_lgetLDT): New function, returns LDT for a given
1202 (sol_find_new_threads): Handle failed libthread_db initialization
1204 * stabsread.c (define_symbol): Use IS_STATIC_TRANSFORM_NAME
1205 to check for a SunPro transformed symbol name.
1207 Fri Apr 10 10:35:35 1998 John Metzler <jmetzler@cygnus.com>
1209 * utils.c (fmthex): A formatting function for hexdumps
1211 * mips-tdep.c (unpack_mips16): Fixed instruction decoding, lots of
1212 bit pattern interpretations. mips_fetch_instruction does not work
1213 for 16 bit instructions. Some confusion remains about sign
1214 extension in backward branches.
1215 (mips32_relative_offset): Sign extension
1216 (mips32_next_pc): Major debugging, bit pattern interpretation
1217 (print_unpack): debugging printf
1218 (fetch_mips_16): new funtion, key on PC low bit, not symbol table
1219 (mips16_next_16): Initial major debugging of this function. Lots
1220 of bit pattern mistakes.
1221 (mips_next_pc): key on low bit of PC, not symbol table.
1222 * symfile.c(generic_load) : Added a download verification which
1223 reads back the loade code. Download chunk size is now a defined
1224 macro. Fixed a bug in which downloading slips into loading one
1225 byte at a time. Lower level functions in monitor.c can load long
1226 sequences of bytes and make use of these fixups. Referencing
1227 bfd-start_address directly was incorrectly getting zero for start.
1229 Thu Apr 9 19:20:32 1998 Ian Lance Taylor <ian@cygnus.com>
1231 * mips-tdep.c (do_fp_register_row): Use alloca rather than arrays
1234 Wed Apr 8 19:21:42 1998 Jason Molenda (crash@bugshack.cygnus.com)
1236 * top.c (print_gdb_version): Print 1998 now.
1238 Wed Apr 8 16:57:22 1998 Philippe De Muyter <phdm@macqel.be>
1240 * source.c: Remove obsolete decl of strstr().
1242 Wed Apr 8 16:47:33 1998 Jason Molenda (crash@bugshack.cygnus.com)
1244 * solib.c (solib_create_inferior_hook): Remove Ulrich Drepper's
1245 patch of March 23 1998.
1246 * breakpoint.c (breakpoint_re_set_one): Remove Ulrich Drepper's
1247 patch of March 23 1998.
1249 Sat Apr 4 10:05:00 1998 Dawn Perchik <dawn@cygnus.com>
1251 * mdebugread.c (parse_partial_symbols): If this is an .mdebug
1252 section in an ELF file, override a symbol's ECOFF section with its
1253 ELF section. Also, fix stabs continuation where a stabs string
1254 continues for more than one continuation.
1256 Mon Apr 6 09:17:48 1998 Andrew Cagney <cagney@b1.cygnus.com>
1258 * mips-tdep.c (mips_push_arguments): Specify dimention of valbuf
1259 using MAX_REGISTER_RAW_SIZE.
1261 Sat Apr 4 10:05:00 1998 Dawn Perchik <dawn@cygnus.com>
1263 * infrun.c: Fix prototype of signals_info to match static funtion.
1265 Thu Apr 2 12:47:41 1998 Frank Ch. Eigler <fche@cygnus.com>
1267 * sol-thread.c (sol_thread_store_registers): Save & restore new
1268 value of single updated register to prevent accidental clobbering.
1270 Wed Apr 1 22:01:09 1998 Mark Alexander <marka@cygnus.com>
1272 * config/sparc/tm-sparclite.h (TARGET_BYTE_ORDER_SELECTABLE): Define.
1273 * config/sparc/sparclite.mt: Link in the erc32 simulator.
1275 Wed Apr 1 16:30:49 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
1277 * ns32k-tdep.c (flip_bytes, ns32k_localcount,
1278 ns32k_get_enter_addr, sign_extend): Restore functions mysteriously
1281 * ns32knbsd-nat.c: New (?) file to support fetching and storing
1282 registers on NetBSD hosts.
1284 * nbsd.mh (NATDEPFILES): put ns32knbsd-nat.o instead of
1287 * ns32km3-nat.c (reg_offset): Get order of floating point
1288 registers correct. Add extra 32382 register offsets.
1289 (REG_ADDRESS): define to point at correct part of thread
1290 state. Use calls to "warning" instead of "message".
1292 * tm-nbsd.h, tm-ns32km3.h (REGISTER_NAMES, NUM_REGS,
1293 REGISTER_BYTES, REGISTER_BYTE): redefine allowing for 32382
1296 Wed Apr 1 13:43:07 1998 Philippe De Muyter <phdm@macqel.be>
1298 * NEWS: m68k-motorola-sysv host support added.
1299 * coffread.c (coff_start_symtab): Accept the filename as an argument,
1300 set it here. Callers updated.
1302 Wed Apr 1 23:13:23 1998 Andrew Cagney <cagney@b1.cygnus.com>
1304 * config/mips/tm-mips.h (REGISTER_VIRTUAL_TYPE): Handle 32 bit SR,
1305 FSR and FIR registers.
1306 (REGISTER_VIRTUAL_SIZE): Compute using REGISTER_VIRTUAL_TYPE.
1307 (REGISTER_RAW_SIZE): Define using REGISTER_VIRTUAL_SIZE.
1309 * config/mips/tm-mips64.h: Ditto.
1311 Tue Mar 31 21:30:39 1998 Nick Clifton <nickc@cygnus.com>
1313 * arm-tdep.c (gdb_print_insn_arm): Attach a fake Thumb symbol
1314 vector to the info structure when disassembling thumb
1317 * coffread.c (coff_symtab_read, read_one_sym,
1318 process_coff_symbol): Support Thumb symbol types.
1320 * dbxread.c (process_one_symbol): Call SMASH_TEXT_ADDRESS (if it
1321 is defined) for function symbols.
1323 Mon Feb 16 14:05:54 1998 Andrew Cagney <cagney@b1.cygnus.com>
1325 * d10v-tdep.c (d10v_extract_return_value): Wierd. GCC wants to
1326 return odd sized register quantities with only half of the first
1329 * config/d10v/tm-d10v.h (USE_STRUCT_CONVENTION): Use stack when
1332 Tue Mar 31 16:39:28 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
1334 * tracepoint.c (get_tracepoint_by_number): change warning to note.
1335 (delete_trace_command): suppress y/n query if no tracepoints, or
1336 if not from_tty. (trace_pass_command): reject junk at end of args.
1337 (read_actions): an action list consisting only of "end" is discarded.
1338 (validate_actionline (for collect command)): an argument beginning
1339 with a dollar_sign but not recognized as a special argument is
1340 parsed like any other expression -- if it isn't a register name,
1341 it's rejected. Also reject an empty argument to while-stepping.
1342 (trace_find_command): reject a negative frame number argument.
1343 (_initialize_tracepoint): set $traceframe initially to -1.
1345 Mon Mar 30 16:42:12 1998 Jason Molenda (crash@bugshack.cygnus.com)
1347 * rdi-share/Makefile.am, rdi-share/aclocal.m4,
1348 rdi-share/configure: New files.
1349 * rdi-share/configure.in: Rewritten to be an autoconf input file.
1350 * rdi-share/Makefile.in, rdi-share/configure: Generated by
1352 * rdi-share/dbg_hif.h, etherdrv.c, hostchan.c: Use autoconf tests
1353 to check environment.
1355 Sun Mar 29 15:17:16 1998 Keith Seitz <keiths@onions.cygnus.com>
1357 * tracepoint.c (trace_start_command): Set trace_running_p.
1358 (trace_stop_command): Clear trace_running_p.
1360 Sat Mar 28 15:19:48 1998 Stan Shebs <shebs@andros.cygnus.com>
1362 * NEWS: Update for 4.17 release.
1364 Fri Mar 27 10:15:50 1998 David Taylor <taylor@tito.cygnus.com>
1366 * tracepoint.c (parse_and_eval_memrange): Fix memory leaks.
1367 (encode_actions): Use the new gen_trace_for_expr function
1368 instead of expr_to_address_and_size; collect registers when
1369 using expressions. (clear_collection_list): Fix memory leak.
1371 1998-03-26 Jim Blandy <jimb@zwingli.cygnus.com>
1373 * ax-gdb.h (gen_trace_for_expr): Add prototype.
1375 Thu Mar 26 17:24:23 1998 David Taylor <taylor@texas.cygnus.com>
1377 * tracepoint.c (validate_actionline): Fix memory leak.
1378 (encode_actions): Fix memory leak.
1380 Thu Mar 26 16:16:55 1998 David Taylor <taylor@tito.cygnus.com>
1382 * tracepoint.c (trace_mention): New function.
1383 (trace_command): Call it.
1385 1998-03-26 Jim Blandy <jimb@zwingli.cygnus.com>
1387 * ax-general.c (ax_reqs): New function.
1388 * ax.h (enum agent_flaws, struct agent_reqs): New types.
1389 (agent_reqs): New extern prototype. Well, actually, this was
1390 there before, due to a premature checkin.
1391 (struct aop_map): Add new `data_size' member.
1392 * ax-general.c (aop_map): Supply its value.
1393 * ax-gdb.c (agent_command): Call ax_reqs, for testing.
1395 * ax-general.c (ax_print): If we encounter an invalid or
1396 incomplete opcode, don't abort; just print an error message.
1398 * ax-gdb.c: Generate trace bytecodes, as appropriate.
1399 (trace_kludge): New variable.
1400 (gen_fetch, gen_bitfield_ref): Emit trace bytecodes, if asked
1402 (expr_to_agent): Ask for no trace bytecodes.
1403 (gen_trace_for_expr): New function.
1404 (agent_command): Call it, and display the result appropriately ---
1405 no struct axs_value, so no type or kind information.
1407 * ax-gdb.c: Use TARGET_CHAR_BIT throughout, not HOST_CHAR_BIT.
1409 Thu Mar 26 22:29:28 1998 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
1411 * tracepoint.c (trace_status_command): Recognize a boolean return
1412 value from the stub to indicate whether trace experiment is
1413 running. Export this value as a global state variable.
1414 (trace_running_p) for use by the GUI. (from Michael Snyder)
1415 (trace_pass_command) added call to modify_tracepoint_hook.
1417 * tracepoint.h export trace_running_p.
1419 Thu Mar 26 13:08:01 1998 David Taylor <taylor@texas.cygnus.com>
1421 * tracepoint.c (validate_actionline): do not error out if
1422 exp->elts[0].opcode is not on short line -- let
1423 expr_to_address_and_size handle it.
1425 1998-03-26 Jim Blandy <jimb@zwingli.cygnus.com>
1427 * tracepoint.c: Include "ax.h", not "agentexpr.h".
1429 * tracepoint.c (encode_actions): Call expr_to_address_and_size,
1430 not simply expr_to_agent.
1432 * ax-general.c: Comment out code in progress, so everyone else can
1435 * gdbtypes.c: Doc fix.
1437 * ax.h, ax-gdb.h, ax-general.c, ax-gdb.c: New files.
1438 * Makefile.in (REMOTE_OBJS): Add ax-general.o and ax-gdb.o.
1439 (SFILES): Add ax-general.c, ax-gdb.c.
1440 (ax_h): New variable.
1441 (ax-general.o, ax-gdb.o): New rules.
1444 Wed Mar 25 11:45:19 1998 Frank Ch. Eigler <fche@cygnus.com>
1446 * configure.in (sim-gpu2): Added target type checking to make
1447 --with-sim-gpu2 option only valid for sky target.
1448 * configure: Regenerated.
1451 Tue Mar 24 16:22:40 1998 Stu Grossman <grossman@bhuna.cygnus.co.uk>
1453 * Makefile.in: Derive SHELL from configure.
1454 * config/d10v/d10v.mt config/m32r/m32r.mt
1455 config/mn10200/mn10200.mt config/mn10300/mn10300.mt
1456 config/d30v/d30v.mt : Remove -lm from SIM. This prevents
1457 dependency checking of -lm (under NT native builds). (It is
1458 automatically added by configure if it exists.)
1459 * doc/configure mswin/configure nlm/configure
1460 testsuite/gdb.base/configure testsuite/gdb.c++/configure
1461 testsuite/gdb.chill/configure testsuite/gdb.disasm/configure
1462 testsuite/gdb.stabs/configure testsuite/gdb.threads/configure:
1463 Regenerate with autoconf 2.12.1 to fix shell issues for NT native
1466 Mon Mar 23 18:10:57 1998 Ulrich Drepper (drepper@cygnus.com)
1468 * solib.c (solib_create_inferior_hook): Rewrite previous
1469 change to check the type of file via BFD.
1471 Mon Mar 23 13:52:28 1998 Ulrich Drepper (drepper@cygnus.com)
1473 * breakpoint.c (breakpoint_re_set_one): Treat bp_shlib_events
1474 like bp_breakpoints.
1475 * solib.c (solib_create_inferior_hook): Relocate section addresses
1476 if the alleged start address doesn't agree with the PC.
1479 Mon Mar 23 13:07:22 1998 Frank Ch. Eigler <fche@cygnus.com>
1481 * configure.in (sim-gpu2): Added --with-sim-gpu2 as configure
1482 option, to allow gdb+sim linking with sky GPU2 library.
1483 * configure: Regenerated.
1486 Sat Mar 21 19:34:49 1998 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
1488 merged changes from Foundry (list follows by file/author):
1490 - Tom Tromey <tromey@cygnus.com>
1491 * Makefile.in (gdbres.o): New target.
1492 (WINDRES): New define.
1493 * configure: Rebuilt.
1494 * configure.in (WINDRES): Define.
1495 (CONFIG_OBS): Include gdbres.o on Windows.
1496 * gdbtool.ico: New file.
1500 - Keith Seitz <keiths@onions.cygnus.com>
1501 (wait_for): Don't reset the timeout_remaining for CYGWIN32,
1502 since we now effectively poll the serial port.
1503 Don't reset the current_timeout, either, since this member is used
1504 by hardwire_readchar to track the timeout and call the ui_loop_hook.
1505 (hardwire_readchar): Poll the serial port for Cygwin32. We timeout
1506 every second, update the UI, and loop around doing this until we
1507 have hit the real timeout or we get data or an error. This will
1508 allow the UI to stay active while gdb is "blocked" talking to the
1510 - Martin M. Hunt <hunt@cygnus.com>
1511 (wait_for): Do reset current_timeout because it is only used to
1512 keep track of what the current timeout for the scb is.
1515 - Martin M. Hunt <hunt@cygnus.com>
1516 (quit_confirm): Change exit message again
1518 (pc_changed_hook): Add prototype.
1519 - Tom Tromey <tromey@cygnus.com>
1520 (quit_confirm): Added missing `else'.
1521 (quit_confirm): Special-case message if init_ui_hook is
1525 - Martin M. Hunt <hunt@cygnus.com>
1526 (find_pc_sect_line): If no symbol information
1527 is found, return correct pc anyway.
1528 (find_methods): Comment out an apparently
1529 bogus error message because it messes up Foundry.
1532 - Martin M. Hunt <hunt@cygnus.com>
1533 (_initialize_serial): Add a description of
1534 "set remotelogbase".
1537 - Martin M. Hunt <hunt@cygnus.com>
1538 (write_register_gen): Add call to
1539 pc_changed_hook if the PC is being changed.
1542 - Martin M. Hunt <hunt@cygnus.com>
1543 (pc_changed_hook): Define.
1546 - Martin M. Hunt <hunt@cygnus.com>
1547 (do_setshow_command): If no arguments are supplied,
1548 don't dump core, instead print out an error message.
1551 - Martin M. Hunt <hunt@cygnus.com>
1552 Make set_raw_breakpoint, set_breakpoint_count,
1553 and breakpoint_count non-static so they are accessible from
1555 (enable_breakpoint): Enable breakpoint
1556 with same disposition instead of changing all breakpoints
1560 - Keith Seitz <keiths@onions.cygnus.com>
1561 Add declarations for annotation hooks.
1564 - Keith Seitz <keiths@onions.cygnus.com>
1565 Add hooks: annotate_starting_hook, annotate_stopped_hook,
1566 annotate_signalled_hook, annotate_exited_hook.
1567 (annotate_starting): If hook exists, call it instead.
1568 (annotate_stopped): If hook exists, call it instead.
1569 (annotate_exited): If hook exists, call it instead.
1570 (annotate_signalled): If hook exists, call it instead.
1572 Fri Mar 20 14:45:36 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
1574 * gdbserver/Makefile.in: add dependency on XM_CLIBS.
1575 * gdbserver/low-sim.c (registers) force into alignment.
1576 (create_inferior): Fix typo on new_argv; add abfd arg to
1577 sim_open, sim_create_inferior. Add reg_size arg to
1578 sim_fetch_register, sim_store_register. Make simulator
1579 take a single-step to get into a known running state.
1580 * gdbserver/gdbreplay.c: include fcntl.h for def'n of F_SETFL.
1581 * gdbserver/server.c: Add remote_debug variable to control
1583 * gdbserver/server.h: Add prototypes for enable/disable_async_io.
1584 * gdbserver/remote-utils.c: add verbose debugging output controlled
1585 by "remote_debug" variable. Add call to "disable_async_io()"
1586 to avoid being killed by async SIGIO signals.
1587 * config/m32r/m32r.mt: define GDBSERVER_(LIBS and DEPFILES),
1588 so that gdbserver can be built with the m32r simulator.
1590 Fri Mar 20 09:04:06 1998 Andrew Cagney <cagney@b1.cygnus.com>
1592 start-sanitize-r5900
1593 * config/mips/tm-r5900.h (REGISTER_VIRTUAL_SIZE): Redefine as
1594 expression from REGISTER_VIRTUAL_TYPE.
1595 (REGISTER_RAW_SIZE): Ditto.
1596 (REGISTER_VIRTUAL_TYPE): Redefine, use explicit size for 32 bit
1600 * gdbtypes.h (builtin_type_{,u}int{8,16,32,64}): New gdb builtin
1602 start-sanitize-r5900
1603 (builtin_type_{,u}int128): Ditto.
1606 * gdbtypes.c (_initialize_gdbtypes): Initialize new types.
1608 * mips-tdep.c (do_gp_register_row): Pad register value when GP
1609 register is smaller than MIPS_REGSIZE.
1611 * findvar.c (value_of_register): When raw and virtual register
1612 values identical, check that sizes are consistent.
1614 Thu Mar 19 11:32:15 1998 Michael Snyder (msnyder@cleaver.cygnus.com)
1616 * minsyms.c (compare_minimal_symbols): If addresses are identical,
1617 then compare on names. Sorted list should have symbols with
1618 identical addresses AND names adjacent, so dups can be discarded.
1620 Wed Mar 18 12:50:17 1998 Jeff Law (law@cygnus.com)
1622 * stabsread.c (define_symbol): Don't look for ',' as a LRS
1625 Wed Mar 18 10:34:51 1998 Nick Clifton <nickc@cygnus.com>
1627 * rdi-share/etherdrv.c: Set sys_errlist[] as char * not const char *.
1629 Fri Mar 13 15:43:53 1998 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1631 * config/mips/xm-mips.h (CC_HAS_LONG_LONG): Undefine for Ultrix
1632 when compiling with native cc, the compiler has broken long long
1635 Fri Mar 13 15:37:02 1998 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1637 * config/m68k/xm-sun3os4.h: Remove malloc declarations, they
1638 are handled via autoconf now.
1639 * remote.c (remote_ops, extended_remote_ops): Replace static
1640 forward declaration by moving the static definition to the top of
1641 the file, for old K&R compilers.
1642 * tracepoint.c (collect_symbol, trace_start_command):
1643 Replace ANSI string concatenation with K&R compatible simple string.
1645 1998-03-11 Fred Fish <fnf@ninemoons.com>
1647 * source.c (select_source_symtab): Don't reach error if we have
1648 a current_source_symtab from reading in partial symbol table.
1650 start-sanitize-vr4320
1651 Tue Mar 10 16:15:13 1998 Gavin Koch <gavin@cygnus.com>
1653 * configure.tgt (mips64*vr4320*el-*-elf*) : Removed spurious case.
1656 Fri Mar 6 13:10:27 1998 Fred Fish <fnf@cygnus.com>
1658 * utils.c (quit): Call SERIAL_DRAIN_OUTPUT rather than
1659 SERIAL_FLUSH_OUTPUT.
1660 * serial.h (struct serial_ops): Add drain_output, pointer to
1661 function that waits for output to drain.
1662 (SERIAL_DRAIN_OUTPUT): Macro to wait for output to drain.
1663 * ser-unix.c (hardwire_drain_output): New function and prototype.
1665 * ser-unix.c (hardwire_ops): Add entry for drain_output function.
1666 * ser-tcp.c (tcp_ops): Ditto.
1667 * ser-ocd.c (ocd_ops): Ditto.
1668 * ser-mac.c (mac_ops): Ditto.
1669 * ser-go32.c (dos_ops): Ditto.
1670 * ser-e7kpc.c (e7000pc_ops): Ditto.
1672 Thu Mar 5 16:07:41 1998 Michael Snyder (msnyder@cleaver.cygnus.com)
1674 * sparcl-tdep.c: fix #endif comments
1676 Thu Mar 5 15:10:35 1998 Jason Molenda (crash@bugshack.cygnus.com)
1678 * Makefile.in (BISON): Configure substitutes in @YACC@, not @BISON@.
1680 Thu Mar 5 14:42:41 1998 Keith Seitz <keiths@onions.cygnus.com>
1682 * ocd.c (ocd_open): If we fail ocd_start_remote, make sure we
1683 error () so that we abort out of bdm_ppc_open.
1685 Wed Mar 4 16:53:52 1998 Martin M. Hunt <hunt@cygnus.com>
1687 * serial.c (_initialize_serial): Add a description of
1688 "set remotelogbase".
1690 * command.c (do_setshow_command): If no arguments are supplied,
1691 don't dump core, instead print out an error message.
1693 Wed Mar 4 16:50:18 1998 Jason Molenda (crash@bugshack.cygnus.com)
1695 * gdbtk.c (gdb_listfiles): Fix thinko in last change.
1697 Wed Mar 4 15:34:49 1998 Jason Molenda (crash@bugshack.cygnus.com)
1699 * gdbtk.c (gdb_listfiles): Allocate space for 'files' dynamically.
1701 Wed Mar 4 01:39:08 1998 Ron Unrau <runrau@cygnus.com>
1703 * elfread.c (elf_symtab_read): merge SYMBOL_IS_SPECIAL into
1704 MAKE_MSYMBOL_SPECIAL
1705 * config/mips/tm-mips.h: ditto
1707 Tue Mar 3 17:19:08 1998 John Metzler <jmetzler@cygnus.com>
1709 start-sanitize-vr4111
1710 * config/mips/tm-vr4xxx.h: implements vr4111 as separate from 4300
1711 * config/mips/vr4xxx.tm: implements vr4111 as separate from 4300
1712 * configure.tgt: Recognise mips64vr4111-*-elf as vr4xxx
1714 * dwarfread.c (read_tag_pointer_type): Pointer sizes now come from
1715 TARGET_PTR_BIT rather from sizeof(char *) on host.
1717 Tue Mar 3 14:37:02 1998 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1719 * alpha-nat.c (fetch_osf_core_registers): Renamed from
1720 fetch_aout_core_registers.
1721 (alpha_osf_core_fns): Renamed from alpha_aout_core_fns, change
1722 flavour to bfd_target_unknown_flavour for OSF core files.
1724 start-sanitize-vr4320
1725 Tue Mar 3 11:12:39 1998 Gavin Koch <gavin@cygnus.com>
1727 * configure.tgt (mips64*vr4320*el-*-elf*,mips64*vr4320*-*-elf*) :
1731 Mon Mar 2 17:44:13 1998 Michael Snyder (msnyder@cleaver.cygnus.com)
1733 * breakpoint.c (_initialize_breakpoint): Make "en" an alias
1734 for "enable" (so that it doesn't conflict with "end").
1736 Mon Mar 2 17:04:25 1998 Jason Molenda (crash@bugshack.cygnus.com)
1738 * Makefile (VERSION): Bump to 4.17.1.
1740 Mon Mar 2 16:59:15 1998 Jason Molenda (crash@bugshack.cygnus.com)
1742 * rdi-share/etherdrv.c (sys_errlist): Add correct decl for Linux.
1744 Mon Mar 2 16:51:44 1998 Jason Molenda (crash@bugshack.cygnus.com)
1746 * Makefile.in (YYFILES): Remove in maintainer-clean, not distclean.
1748 Mon Mar 2 16:47:11 1998 Philippe De Muyter <phdm@macqel.be>
1750 * Makefile.in (distclean): Add `rm $(YYFILES)'.
1752 Mon Mar 2 16:45:48 1998 Philippe De Muyter <phdm@macqel.be>
1754 * coffread.c (coff_read_enum_type): Set TYPE_FLAG_UNSIGNED if enum
1757 Sun Mar 2 15:16:13 1998 Richard Henderson <rth@cygnus.com>
1759 * configure.host, configure.tgt: Add sparc-linux.
1760 * sparc-nat.c: Include <asm/reg.h> not <machine/reg.h> for Linux.
1761 * config/sparc/*linux*: New files.
1763 Mon Mar 2 12:12:41 1998 Anthony Thompson (athompso@cambridge.arm.com)
1765 * arm-tdep.c (gdb_print_insn_arm): Call print_insn_big_arm
1766 if we're big endian; else call print_insn_little_arm.
1768 Mon Feb 24 11:24:57 1998 Richard Henderson <rth@cygnus.com>
1770 * Makefile.in (BISON): Don't even pretend to use yacc.
1771 (c-exp.tab.o): Use bison -o to use a unique intermediate file.
1772 (f-exp.tab.o, m2-exp.tab.o): Likewise.
1774 (jv-exp.tab.o): Likewise.
1777 Tue Feb 24 03:32:59 1998 Andrew Cagney <cagney@b1.cygnus.com>
1779 * remote-sim.c (gdbsim_fetch_register): Don't abort when the
1780 register size is wrong.
1782 start-sanitize-r5900
1783 Tue Feb 24 02:53:41 1998 And<rew Cagney <cagney@b1.cygnus.com>
1785 * config/mips/tm-r5900.h (REGISTER_VIRTUAL_SIZE,
1786 REGISTE_RAW_SIZE): Re-define.
1789 Thu Feb 19 16:49:48 1998 John Metzler <jmetzler@cygnus.com>
1791 * target.c (debug_to_fetch_registers,debug_to_store_registers,
1792 debug-to_insert_breakpoint,debug_to_remove_breakpoint): tracing
1793 64 bit targets crashed long long printfs.
1795 Tue Feb 17 16:36:22 1998 Michael Snyder (msnyder@cleaver.cygnus.com)
1797 * symfile.c (read_target_int_array): rename read_target_long_array
1798 and force the sizeof an ovly_table element to sizeof(long),
1799 instead of sizeof(int).
1801 Tue Feb 17 18:05:05 1998 Frank Ch. Eigler <fche@cygnus.com>
1803 * remote-mips.c (mips_request): Use unsigned long during parsing
1804 returned value from monitor, to prevent accidental sign extension.
1806 Tue Feb 17 14:28:33 1998 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
1808 * acconfig.h: FORCE_MMCHECK changed to MMCHECK_FORCE.
1809 * configure.in: Ditto.
1810 * configure: Regenerated.
1812 Tue Feb 17 14:07:34 1998 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
1814 * gdbtypes.c (check_typedef): Do not try to resolve the length of
1815 a type which has TYPE_FLAG_TARGET_STUB set, if the target type has
1816 set TYPE_FLAG_TARGET_STUB as well.
1818 Tue Feb 17 14:32:18 1998 Andrew Cagney <cagney@b1.cygnus.com>
1820 * remote-sim.c (gdbsim_fetch_register, gdbsim_store_register):
1821 Pass register size to sim_{fetch,store}_register. Check nr of
1822 register bytes transfered is correct.
1824 Mon Feb 16 14:05:54 1998 Andrew Cagney <cagney@b1.cygnus.com>
1826 * remote-d10v.c (remote_d10v_open): Call push_remote_target
1827 instead of open_remote_target.
1829 * remote.c (remote_xfer_memory): Use REMOTE_TRANSLATE_XFER_ADDRESS
1830 to translate addr/size when defined.
1831 (open_remote_target): Delete.
1833 * target.h (open_remote_target): Delete.
1835 * config/d10v/tm-d10v.h (REMOTE_TRANSLATE_XFER_ADDRESS): Define.
1837 Mon Feb 16 14:05:54 1998 Andrew Cagney <cagney@b1.cygnus.com>
1839 * config/d10v/tm-d10v.h (USE_STRUCT_CONVENTION): Define. True when
1842 Mon Feb 16 14:05:54 1998 Andrew Cagney <cagney@b1.cygnus.com>
1844 * config/d10v/tm-d10v.h (USE_STRUCT_CONVENTION): Define. True when
1847 Sun Feb 15 16:10:50 1998 Ron Unrau <runrau@cygnus.com>
1849 * parse.c (write_dollar_variable): call new function
1850 target_map_name_to_register to allow targets to define their own
1851 register name aliases.
1852 * infcmd.c (registers_info): use target_map_name_to_register so that
1853 "print $reg" and "info reg $reg" use the same register name aliases.
1855 Fri Feb 13 16:40:30 1998 Stan Shebs <shebs@andros.cygnus.com>
1857 * config/i386/i386mk.mt (OBJFORMATS): Delete, no longer used.
1858 * config/i386/xm-i386mk.h: Fix an include.
1859 * config/pyr/tm-pyr.h (PC_INNER_THAN): Remove, never used.
1861 Thu Feb 12 16:12:07 1998 Frank Ch. Eigler <fche@cygnus.com>
1863 * remote-mips.c (mips_enter_debug): Sleep before sending CR to
1865 (mips_exit_debug): Accept any whitespace / verbiage before monitor
1868 Thu Feb 12 18:25:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
1870 * d10v-tdep.c (show_regs): Avoid use of %llx when printing 8 byte
1873 Thu Feb 12 17:10:22 1998 Andrew Cagney <cagney@b1.cygnus.com>
1875 * valops.c (value_at): For d10v, make read pointers with
1876 read_target_unsigned_integer, keep addresses unsigned.
1877 (value_fetch_lazy): Ditto.
1879 Thu Feb 12 12:14:02 1998 Andrew Cagney <cagney@b1.cygnus.com>
1881 * remote-d10v.c: New file. Layer the d10v GDB->remote memory map
1882 on top of the remote serial memory transfer functions.
1884 * config/d10v/d10v.mt (TDEPFILES): Add remote-d10v.o
1886 * Makefile.in (remote-d10v.o): Add dependencies.
1888 * remote.c (remote_open_1): Add arg extended_p, engage extended
1889 protocol when extended_p.
1890 (remote_open, extended_remote_open): Pass !extended_p /
1891 extended_p to remote_open_1.
1893 * remote.c (open_remote_target), target.h: New function.
1895 Wed Feb 11 08:41:15 1998 Andrew Cagney <cagney@b1.cygnus.com>
1897 * config/i386/fbsd.mh (XDEPFILES): Add ser-tcp.o.
1899 Tue Feb 10 17:50:37 1998 Keith Seitz <keiths@onions.cygnus.com>
1901 * tracepoint.c (tracepoint_operation): Call the modify_tracepoint_hook
1903 Remove static declaration of free_actions.
1905 * tracepoint.h: Add declaration of free_actions.
1907 Tue Feb 10 12:17:13 1998 Fred Fish <fnf@cygnus.com>
1909 * symtab.c (decode_line_1): Revert change that mistakenly
1910 removed assignment of sals[0].pc field.
1912 Mon Feb 10 12:37:47 1998 Philippe De Muyter <phdm@macqel.be>
1914 * m68k/tm-delta68.h (EXTRACT_RETURN_VALUE): Type argument for
1915 `REGISTER_CONVERT_TO_VIRTUAL is `TYPE', not
1916 `REGISTER_VIRTUAL_TYPE (FP0_REGNUM)';
1917 (STORE_RETURN_VALUE): Ditto, and offset for `write_register_bytes'
1918 is `REGISTER_BYTE (FP0_REGNUM)', not `FP0_REGNUM'.
1919 (FRAME_NUM_ARGS): New macro.
1920 * m68k/tm-news.h (EXTRACT_RETURN_VALUE, STORE_RETURN_VALUE): Ditto.
1921 * delta68-nat.c (clear_insn_cache): New function, forgotten in previous
1924 Mon Feb 9 11:10:06 1998 Andrew Cagney <cagney@b1.cygnus.com>
1926 * d10v-tdep.c: Replace references to IMEM_ADDR and DMEM_ADDR with
1927 D10V_MAKE_[DI]ADDR and D10V_CONVERT_[ID]ADDR_TO_RAW macros.
1929 * config/d10v/tm-d10v.h (IMEM_START): Move to 0x01......
1930 (DMEM_START): Move to 0x00......
1931 (STACK_START): Move to 0x00..7ffe.
1932 (D10V_MAKE_IADDR, D10V_MAKE_DADDR): Translate unconditionally.
1934 * d10v-tdep.c (d10v_xlate_addr): Delete function.
1936 Mon Feb 9 15:10:21 1998 Fred Fish <fnf@cygnus.com>
1938 * symtab.c (fixup_psymbol_section): Move forward declaration to
1939 top of file with other such decls. Make it a static function.
1940 * symtab.h: Minor formatting tweaks.
1942 Mon Feb 9 13:14:12 1998 Stan Shebs <shebs@andros.cygnus.com>
1944 * config/a29k-udi.mt, config/i960/vxworks960.mt (REMOTE_OBS):
1945 Remove redefinition.
1946 * config/i960/tm-i960.h (BREAKPOINT): Define.
1948 Mon Feb 9 15:35:38 1998 Ian Lance Taylor <ian@cygnus.com>
1950 * Makefile.in (init.c): Ignore errors when making init.c. Seems
1951 necessary to work around bug in Solaris make.
1953 Sun Feb 6 02:44:28 1997 Philippe De Muyter <phdm@macqel.be>
1955 * m68k/tm-delta68.h (CPLUS_MARKER): Macro deleted.
1956 (EXTRACT_STRUCT_VALUE_ADDRESS): Macro defined.
1957 (EXTRACT_RETURN_VALUE, STORE_RETURN_VALUE): Macros modified
1958 because floating-point values return via %fp0.
1959 (CLEAR_INSN_CACHE): New macro.
1960 * m68k/tm-m68k.h (REGISTER_CONVERT_TO_VIRTUAL): Macro fixed
1962 (REGISTER_CONVERT_TO_RAW): Ditto.
1963 * infptrace.c (child_xfer_memory): If CLEAR_INSN_CACHE is defined,
1964 call it after having written in child process's memory.
1965 * inflow.c (PROCESS_GROUP_TYPE): Macro defined if HAVE_TERMIO.
1966 (gdb_has_a_terminal, terminal_ours_1): Functions fixed for HAVE_TERMIO.
1968 Fri Feb 6 16:17:30 1998 Jeffrey A Law (law@cygnus.com)
1970 * config/mips/tm-mips64.h (TARGET_LONG_BIT): Allow final target to
1972 (TARGET_LONG_LONG_BIT): Likewise.
1973 (TARGET_PTR_BIT): Likewise.
1974 start-sanitize-r5900
1975 * config/mips/tm-r5900.h (TARGET_PTR_BIT): Define to 32 bits.
1979 Fri Feb 6 14:33:34 1998 Doug Evans <devans@canuck.cygnus.com>
1981 * configure.tgt (mips64r5900*-sky-elf*): Replaces txvu-elf.
1982 * config/mips/txvu.mt (SIM): txvu -> mips.
1985 Fri Feb 6 17:42:22 1998 Andrew Cagney <cagney@b1.cygnus.com>
1987 * config/d10v/tm-d10v.h (D10V_CONVERT_IADDR_TO_RAW,
1988 D10V_CONVERT_DADDR_TO_RAW): Define.
1990 * d10v-tdep.c (d10v_push_arguments): Re-write. Pass arguments in
1991 registers, regardless of their size, when they fit.
1993 Thu Feb 5 13:16:36 1998 Andrew Cagney <cagney@b1.cygnus.com>
1995 * d10v-tdep.c (d10v_extract_return_value): For function pointers
1996 translate address to IMAP area.
1998 * config/d10v/tm-d10v.h (EXTRA_FRAME_INFO): Delete dummy from
2000 (POP_FRAME): Point at generic_pop_current_frame.
2002 * d10v-tdep.c (d10v_pop_frame): Delete code handling dummy frames,
2004 (d10v_push_return_address): New function.
2005 (d10v_pop_dummy_frame): Delete.
2006 (d10v_fix_call_dummy): Delete.
2007 (d10v_call_dummy_address): Delete.
2009 * d10v-tdep.c (d10v_init_extra_frame_info): Clear dummy and
2012 * d10v-tdep.c (d10v_push_arguments): Keep stack word aligned.
2014 * config/d10v/tm-d10v.h (EXTRACT_STRUCT_VALUE_ADDRESS): Extract
2015 address of structure from first ARG1_REGNUM.
2017 * d10v-tdep.c (d10v_push_arguments): Force 4 byte args into
2018 even-odd register pair. Store 1 and 2 byte args in registers.
2020 * valops.c (value_fetch_lazy): Ensure that a D10V function pointer
2021 is fetched in the correct byte order.
2022 (value_at): Ditto. Also ensure data pointers are mapped to data
2025 * config/d10v/tm-d10v.h (D10V_DADDR_P, D10V_IADDR_P):
2027 * d10v-tdep.c: Replace 2 with REGISTER_RAW_SIZE.
2028 (d10v_pop_frame): Replace R13 with LR_REGNUM.
2029 (d10v_push_arguments): Replace R2 with ARG1_REGNUM.
2030 (d10v_push_arguments): Replace 6 with ARGN_REGNUM.
2031 (d10v_extract_return_value): Access return value with RET1_REGNUM.
2033 * config/d10v/tm-d10v.h (ARG1_REGNUM, ARGN_REGNUM, RET1_REGNUM):
2035 (STORE_RETURN_VALUE): Specify return register using RET1_REGNUM.
2036 (STORE_STRUCT_RETURN): Specify ARG1_REGNUM as the struct ptr
2039 Thu Feb 5 13:16:36 1998 Andrew Cagney <cagney@b1.cygnus.com>
2041 * blockframe.c (generic_pop_dummy_frame): Flush the frame, no
2044 * blockframe.c (generic_pop_current_frame), frames.h: New
2047 Thu Feb 5 17:18:16 1998 Andrew Cagney <cagney@b1.cygnus.com>
2049 * remote-sim.c (gdbsim_create_inferior): clear_proceed_status
2050 before /re/starting the simulator.
2052 Thu Feb 5 15:55:31 1998 C. M. Heard (heard@vvnet.com)
2054 * top.c (do_nothing): Remove signal handler after signal is caught.
2056 Thu Feb 5 11:57:06 1998 Michael Snyder (msnyder@cleaver.cygnus.com)
2058 * tracepoint.c (tracepoint_operation): call free_actions instead
2059 of free. (free_actions): eliminate some memory leaks for actions.
2060 (validate_actionline): pass string arg by reference, so we can
2061 change the pointer. Change all memrange collection arguments to
2062 canonical form (literal address and size), to enforce early
2063 evaluation. Accept UNOP_MEMVAL (assembly variables) for
2064 trace collection. (parse_and_eval_memrange): accept expressions
2065 for the address and size fields of a memrange (and evaluate
2066 them immediately). (several places): use -1 instead of zero
2067 to distinguish an absolute memrange from a register-relative one.
2068 (encode_actions): add handling for UNOP_MEMVAL (assembly variable).
2070 Wed Feb 4 17:40:21 1998 Jason Molenda (crash@bugshack.cygnus.com)
2072 * Makefile.in (SFILES): add tracepoint.c.
2073 (LINTFILES): add @CONFIG_SRCS@.
2075 * configure.in (CONFIG_SRCS): Mirror use of CONFIG_OBS.
2076 * configure: Regenerated.
2078 Tue Feb 3 16:12:32 1998 Gordon W. Ross (gwr@mc.com)
2080 * infptrace.c (child_resume): Don't try to step if
2081 NO_SINGLE_STEP is defined.
2083 Mon Feb 2 19:06:13 1998 Jason Molenda (crash@bugshack.cygnus.com)
2085 * Makefile.in (VERSION): Bump to 4.16.2.
2087 Mon Feb 2 17:18:25 1998 Richard Henderson <rth@cygnus.com>
2089 * alpha-nat.c (fetch_aout_core_registers): Rename from
2090 fetch_core_registers.
2091 (fetch_elf_core_registers): New function.
2092 (supply_gregset): Use ALPHA_REGSET_BASE.
2093 (supply_fpregset): Likewise.
2094 (fill_fpregset): Likewise.
2095 (alpha_aout_core_fns): Rename from alpha_core_fns.
2096 (alpha_elf_core_fns): New.
2097 * config/alpha/alpha-linux.mh (NATDEPFILES): solib.o not osfsolib.o.
2099 * config/alpha/nm-linux.h (SVR4_SHARED_LIBS): Define if ELF.
2100 (TARGET_ELF64): Likewise.
2101 (ALPHA_REGSET_BASE): New.
2102 * config/alpha/nm-osf.h (ALPHA_REGSET_BASE): New.
2103 * config/alpha/tm-alphalinux.h: Include tm-sysv4.h.
2105 * solib.c (elf_locate_base): Add TARGET_ELF64 support.
2106 (info_sharedlibary_command): Likewise.
2108 * configure.host: Match alpha*.
2109 * configure.tgt: Likewise.
2111 Fri Jan 30 15:11:38 1998 David Taylor <taylor@texas.cygnus.com>
2113 Changes by <Peter.Schauer@Regent.E-Technik.TU-Muenchen.DE>
2114 * infrun.c (IN_SOLIB_DYNSYM_RESOLVE_CODE): new macro for detecting
2115 whether we are in the dynamic symbol resolution code
2116 (wait_for_inferior): invoke it.
2117 * solib.c (in_svr4_dynsym_resolve_code): new function
2118 (enable_break): record start and end of the dynamic linker
2119 text and plt sections for use in in_svr4_dynsym_resolve_code.
2120 * solib.h (IN_SOLIB_DYNSYM_RESOLVE_CODE): add svr4 definition;
2121 (in_svr4_dynsym_resolve_code): declare it.
2122 * config/nm-gnu.h (solib.h): move inclusion to after definition
2123 of SVR4_SHARED_LIBS.
2124 * config/nm-sysv4.h (solib.h): ditto.
2125 * config/i386/nm-i386sco5.h (solib.h): ditto.
2126 * config/i386/nm-linux.h (solib.h): ditto.
2127 * config/mips/nm-irix5.h (IN_SOLIB_DYNSYM_RESOLVE_CODE): undefine.
2129 Thu Jan 29 19:39:31 1998 Stan Shebs <shebs@andros.cygnus.com>
2131 * coffread.c (coff_symtab_read) [SEM]: Remove code, macro can
2133 * dbxread.c (process_one_symbol) [BLOCK_ADDRESS_ABSOLUTE]:
2134 Remove, no longer needed.
2135 * hppa-tdep.c (N_SET_MAGIC): Remove, no longer used.
2136 * config/pa/xm-hppab.h (SEEK_SET, SEEK_CUR, SEEK_END): Ditto.
2137 * config/mips/tm-mipsm3.h (NUMERIC_REG_NAMES): Ditto.
2138 * config/mips/mipsm3.mt (TDEPFILES): Remove mipsread.o.
2140 Wed Jan 28 14:46:52 1998 Stan Shebs <shebs@andros.cygnus.com>
2142 Suggested by Chris Walter <walter@budoe.bu.edu>:
2143 * dwarfread.c (set_cu_language): Recognize Fortran.
2144 * dwarf2read.c (set_cu_language): Ditto.
2145 (read_array_type): Fix language test.
2147 Wed Jan 28 12:51:08 1998 Michael Snyder (msnyder@cleaver.cygnus.com)
2149 * blockframe.c (generic_frame_chain_valid): A frame pointer may
2150 be valid if it is equal to the frame pointer of its caller (ie.
2151 not necessarily strictly INNER_THAN). Allows frameless functions.
2153 Wed Jan 28 11:23:25 1998 Mark Alexander <marka@cygnus.com>
2155 * monitor.c (monitor_vsprintf): New function to handle
2156 printing of large addresses using %A format specifier.
2157 (monitor_printf_noecho, monitor_printf): Use monitor_vsprintf
2158 instead of vsprintf.
2159 * dve3900-rom.c (_initialize_r3900_rom): Use %A instead of %Lx
2162 Tue Jan 27 16:14:23 1998 Jason Molenda (crash@bugshack.cygnus.com)
2164 * configure.in (CONFIG_LDFLAGS): Only add -export-dynamic
2167 Mon Jan 26 19:07:46 1998 Jason Molenda (crash@bugshack.cygnus.com)
2169 * config/alpha/tm-alphalinux.h (alpha_linux_sigtramp_offset):
2170 Add closing parenthesis. From HJ Lu.
2172 Mon Jan 26 17:54:45 1998 Mark Alexander <marka@cygnus.com>
2174 * dve3900-rom.c: Improve performance by using memory commands
2175 that print less fluff. Minor cosmetic changes.
2176 Eliminate compiler warnings.
2178 Sat Jan 24 23:44:43 1998 Martin M. Hunt <hunt@cygnus.com>
2180 * breakpoint.c (enable_breakpoint): Preserve breakpoint
2181 disposition when enabling a breakpoint.
2183 * symtab.c (find_pc_sect_line): If no symbol information
2184 is found, return correct pc anyway.
2186 Fri Jan 23 17:26:22 1998 Stan Shebs <shebs@andros.cygnus.com>
2188 * configure.host (i[3456]86-*-osf1mk*, mips-*-mach3*,
2189 ns32k-*-mach3*): Fix file names.
2190 (i[3456]86-*-os9k, m88*-*-mach3*, w65-*-*): Remove config
2191 recognition, no source files for these.
2192 * configure.tgt (powerpc-*-aix4*): Remove config, now identical
2194 * config/powerpc/{aix4.mh,aix4.mt,tm-ppc-aix4.h}: Remove files,
2197 Fri Jan 23 16:49:41 1998 Mark Alexander <marka@cygnus.com>
2199 * monitor.c (monitor_write, monitor_readchar): New functions.
2200 * monitor.h (monitor_write, monitor_readchar): Declare.
2201 * dve3900-rom.c: Add support for fast loading on ethernet connections.
2203 Fri Jan 23 07:47:06 1998 Fred Fish <fnf@cygnus.com>
2205 * config/d10v/tm-d10v.h (CALL_DUMMY): Define as "{ 0 }".
2206 (TARGET_READ_FP): Define to d10v_read_fp rather than d10v_read_sp.
2207 (TARGET_WRITE_FP): Define to d10v_write_fp rather than d10v_write_sp.
2208 (d10v_write_fp, d10v_read_fp): Add prototypes.
2209 * symtab.c (decode_line_1): Remove assignment of sals[0].pc field.
2210 * symfile.c (simple_overlay_update, simple_overlay_update_1):
2211 Ignore the size of overlay sections. This check is redundant anyway.
2212 * printcmd.c (print_frame_args): Ditto.
2213 * valops.c (value_fetch_lazy): Ditto.
2214 * values.c (unpack_long): Ditto.
2215 * d10v-tdep.c (d10v_frame_chain, d10v_frame_find_saved_regs,
2216 d10v_init_extra_frame_info): Fix some minor bugs so the finish command
2218 (show_regs): Change num1 and num2 types from "long long" to "LONGEST".
2219 (d10v_read_fp, d10v_write_fp): New functions.
2220 (d10v_push_arguments): Remove unneeded assigns to "val" and "contents".
2221 (d10v_push_arguments): Fix for pointers and structs.
2222 (d10v_extract_return_value): Fix for pointers and chars.
2224 Tue Jan 20 18:53:18 1998 Stan Shebs <shebs@andros.cygnus.com>
2226 * configure.tgt (i386-*-mach*, m88*-*-mach3*): Remove config
2227 recognition, no source files for these (note that the i386 Mach
2228 config is for pre-Mach 3).
2229 (mips*-*-mach3*, ns32k-*-mach3*): Fix file names.
2230 * config/mips/mipsel64.mt: Remove, never referenced.
2232 Mon Jan 19 14:01:28 1998 Stan Shebs <shebs@andros.cygnus.com>
2234 * top.c (print_gdb_version): Restore to original message.
2236 Mon Jan 19 13:34:40 1998 Ian Lance Taylor <ian@cygnus.com>
2238 From cgf@bbc.com (Chris Faylor):
2239 * win32-nat.c (child_mourn_inferior): Call ContinueDebugEvent to
2241 (child_kill_inferior): Respond to all debug events as the child is
2244 * Makefile.in (all): Change gdb dependency to gdb$(EXEEXT).
2245 (uninstall): Add $(EXEEXT) to file name to remove.
2246 (gdb$(EXEEXT)): Rename target from plain gdb.
2247 (gdb1$(EXEEXT)): Rename target from plain gdb1.
2248 (clean, mostlyclean): Add $(EXEEXT) to binary names to remove.
2250 1998-01-16 Felix Lee <flee@cygnus.com>
2252 * top.c (print_gdb_version): delete stutter.
2254 Thu Jan 15 12:29:13 1998 Nick Clifton <nickc@cygnus.com>
2256 * remote-rdi.c (arm_rdi_open): Patch from Tony.Thompson@arm.com
2257 to prevent spurous error messages on non-ICE targets.
2259 Wed Jan 14 19:27:02 1998 Stan Shebs <shebs@andros.cygnus.com>
2261 * config/mips/{r3900.mt,r3900l.mt,tm-r3900.h,tm-r3900l.h}:
2262 Remove, no longer used.
2264 Wed Jan 14 18:11:26 1998 Michael Meissner <meissner@cygnus.com>
2266 Patch from Jim Wilson.
2267 * d30v-tdep.c (d30v_frame_find_saved_regs_offsets): Properly
2268 declare void function before use.
2270 * config/d30v/tm-d30v.h (CALL_DUMMY): Initialize as { 0 }, not {}.
2272 Tue Jan 13 16:38:48 1998 Fred Fish <fnf@cygnus.com>
2274 * configure.in (--with-mmalloc): Add new configure arg to use the
2275 mmalloc package. Default is to not use it.
2276 (START_INFERIOR_TRAPS_EXPECTED): Define to the integer 2, not
2278 * acconfig.h (USE_MMALLOC, FORCE_MMCHECK): Add #undef.
2279 * configure: Regenerated.
2280 * config.in: Regenerated.
2281 * Makefile.in (MMALLOC_DIR, MMALLOC_SRC): Remove.
2282 (MMALLOC): Set using configure.
2283 (MMALLOC_CFLAGS): Set using configure.
2285 * config/i386/tm-linux.h (sys_quotactl): Define to 1 rather
2286 than just defining it.
2287 * mpw-make.sed: Undefine USE_MMALLOC rather than defining NO_MMALLOC.
2288 * utils.c (NO_MMALLOC): Use USE_MMALLOC instead.
2289 * objfiles.c: ditto.
2292 * config/sparc/sun4os4.mh (MMALLOC_CFLAGS): Remove.
2293 * config/m68k/sun3os4.mh (MMALLOC_CFLAGS): Remove.
2294 * config/i386/cygwin32.mh (MMALLOC_CFLAGS): Remove.
2295 * config/alpha/alpha-osf3.mh (MMALLOC_CFLAGS): Remove.
2296 * config/alpha/alpha-osf2.mh (MMALLOC_CFLAGS): Remove.
2297 * gdbserver/Makefile.in (MMALLOC_*): Remove.
2298 * config/rs6000/rs6000.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
2299 * config/rs6000/aix4.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
2300 * config/powerpc/aix4.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
2301 * config/powerpc/aix.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
2302 * config/ns32k/ns32km3.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
2303 * config/mips/mipsm3.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
2304 * config/mips/decstation.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
2305 * config/m88k/cxux.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
2306 * config/i386/xm-windows.h (NO_MMALLOC, NO_MMCHECK): Remove.
2307 * config/i386/i386mk.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
2308 * config/i386/i386m3.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
2309 * config/i386/i386gnu.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
2310 * config/alpha/alpha-osf1.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
2311 * config/alpha/alpha-linux.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
2313 Mon Jan 12 11:46:51 1998 Michael Snyder (msnyder@cleaver.cygnus.com)
2315 * config/m68k/tm-m68k.h (REGISTER_VIRTUAL_TYPE): make A0 thru A7
2316 default to void pointer type (so that their default radix is hex).
2318 * symtab.c: move rbreak_command from no_class to class_breakpoint
2319 so it will be listed under "help breakpoints".
2321 Sat Jan 10 14:58:04 1998 Stan Shebs <shebs@andros.cygnus.com>
2323 * rdi-share/hostchan.c: Remove gettimeofday declaration.
2325 Thu Jan 8 11:03:59 1998 Nick Clifton <nickc@cygnus.com>
2327 * remote-rdp.c: Applied patches submitted by Tony.Thompson@arm.com
2328 to implement the Angel remote debugging interface.
2330 * Makefile.in: Add build rules for remote-rdi.c and
2331 rdi-share/libangsd.a.
2333 * configure.tgt: Updated from source on branch.
2334 * config/arm/tm-arm.h: Updated from source on branch.
2335 * arm-tdep.c: Updated from source on branch.
2337 * rdi-share: New directory, RDI library contributed by ARM.
2339 Mon Jan 5 20:21:59 1998 Mark Alexander <marka@cygnus.com>
2341 * monitor.h (MO_PRINT_PROGRAM_OUTPUT): Define.
2342 * monitor.c (monitor_wait): Echo program output.
2343 * dve3900-rom.c (_initialize_r3900_rom): Remove MO_HANDLE_NL flag,
2344 add MO_PRINT_PROGRAM_OUTPUT flag.
2346 Mon Jan 5 18:21:11 1998 David Taylor <taylor@texas.cygnus.com>
2348 * top.h (HAVE_SIGSETJMP): define SIGJMP_BUF, SIGSETJMP, and
2349 SIGLONGJMP appropriately based on whether HAVE_SIGSETJMP is
2351 * top.c (return_to_top_level, catch_errors): use the new macros
2352 * main.c (SET_TOP_LEVEL): ditto.
2353 * config/xm-sysv4.h (HAVE_SIGSETJMP): Define.
2355 Fri Jan 2 18:48:58 1998 Mark Alexander <marka@cygnus.com>
2357 * configure.in: Double up brackets in shell case pattern.
2359 Fri Jan 2 17:06:05 1998 Michael Snyder (msnyder@cleaver.cygnus.com)
2361 * tracepoint.c (finish_tfind_command): improved algorithm for
2362 deciding when we've "stepped" into a new stack frame.
2363 (map_args_over_tracepoints): loop over tracepoint list "safely",
2364 since list elements may be deleted during loop.
2365 (read_actions): add actions to history list.
2367 For older changes see ChangeLog-97
2373 version-control: never
projects / deliverable / binutils-gdb.git / blob