gdb/ChangeLog

   1 Wed Feb  9 01:14:54 2000  Andrew Cagney  <cagney@amy.cygnus.com>
   2
   3         * config/d10v/tm-d10v.h (NO_EXTRA_ALIGNMENT_NEEDED): Define.
   4         * config/d10v/tm-d10v.h (STACK_ALIGN): Define.
   5         (d10v_stack_align): Declare.
   6         * d10v-tdep.c (d10v_stack_align): Define.
   7
   8 1999-08-23  J.T. Conklin  <jtc@redback.com>
   9
  10         * top.c (remote_timeout): Change default to 2.  Add comment
  11         explaining history of changes to the default value.
  12         * remote.c (_initialize_remote): Remove code that adds set/
  13         show remotetimeout, as that's also done in top.c
  14
  15 1999-10-18  J.T. Conklin  <jtc@redback.com>
  16
  17         * m32r-stub.c, sparcl-stub.c, sparclet-stub.c (handle_exception):
  18         Return E01 instead of P01 when 'P' command fails.
  19
  20 2000-02-05  J.T. Conklin  <jtc@redback.com>
  21
  22         * remote.c (putpkt_binary): Handle NAK from target stub.
  23
  24 2000-02-08  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
  25
  26         * configure.in: Remove the addition of sol-thread.c to the
  27         CONFIG_INITS list. This caused problems with init.c, because
  28         sol-thread.c would be grepped twice for _initialize_* functions.
  29         * configure: Ditto.
  30         * Makefile.in: Add FIXME for init.c.
  31
  32 2000-02-07  Jim Kingdon  <kingdon@redhat.com>
  33
  34         Clean up compiler warnings:
  35         * bcache.h, bcache.c, c-valprint.c, coffread.c, stabsread.c,
  36         stack.c, valprint.c: Change variables to unsigned.
  37         * bcache.c: Rearrange to avoid warnings about variables not being set.
  38         * c-lang.c, ch-lang.c, f-lang.c, m2-lang.c: Include valprint.h
  39         rather than declaring print_max and repeat_count_threashold
  40         ourselves (incorrectly).
  41         * valprint.h: Do declare repeat_count_threashold.
  42         * ch-exp.c: Use default case for internal error.
  43         * findvar.c: Don't omit argument type.
  44         * symtab.c: Remove unused variable.
  45
  46 2000-02-04  Nick Clifton  <nickc@cygnus.com>
  47
  48         * config/arm/tm-arm.h (LOWEST_PC): Define.
  49
  50 2000-02-04  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
  51
  52         * infrun.c (resume): Make just one call to target_resume(), instead
  53         of four: set up correct parameters in all the cases ahead of time,
  54         and do call at the end.
  55
  56 2000-02-04  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
  57
  58         * config/powerpc/tm-ppc-eabi.h: Define
  59         SOFUN_ADDRESS_MAYBE_MISSING.
  60
  61 2000-02-04  Fernando Nasser  <fnasser@totem.to.cygnus.com>
  62
  63         * arm-tdep.c (arm_pc_is_thumb_dummy): Account for large dummy
  64         frames (revisited).
  65
  66 Fri Feb  4 22:42:36 2000  Andrew Cagney  <cagney@b1.cygnus.com>
  67
  68         * Makefile.in (INIT_FILES): Append CONFIG_INITS
  69         * configure.in (CONFIG_INIT): Initialize.
  70         (links): Link srcdir/gdbtk/library to gdbtcl2.
  71         * gdbtcl2: Moved to gdbtk/library.
  72         ChangeLog-gdbtk, gdbtk-cmds.c, gdbtk-hooks.c, gdbtk-variable.c,
  73         gdbtk-varobj.c, gdbtk-wrapper.c, gdbtk-wrapper.h, gdbtk.c,
  74         gdbtk.h: Moved to gdbtk/generic.
  75
  76 2000-02-03  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
  77
  78         * printcmd.c (build_address_symbolic): New function. Returns all
  79         the parts that are necessary to print an address in a symbolic
  80         form.
  81         (print_address_symbolic): Split into a printing part and an
  82         information building part, build_address_symbolic().
  83
  84         * defs.h (build_address_symbolic): Export.
  85
  86 2000-02-03  Jim Blandy  <jimb@redhat.com>
  87
  88         * dwarf2read.c (decode_locdesc): Add support for the DW_OP_bregx
  89         opcode.
  90
  91 2000-02-02  Fernando Nasser  <fnasser@totem.to.cygnus.com>
  92
  93         * arm-tdep.c (arm_push_arguments): Fix passing of floating point
  94         arguments on dummy frames.
  95
  96 2000-02-02  Fernando Nasser  <fnasser@totem.to.cygnus.com>
  97
  98         * arm-tdep.c (arm_pc_is_thumb_dummy): Account for large dummy frames.
  99         (arm_pop_frame): Account fr dummy frames (as opposed to real ones).
 100
 101 2000-02-01  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
 102
 103         * remote.c (getpkt_sane): New function. It is the old getpkt(),
 104         which now returns a timeout indication.
 105         (getpkt): New function. Wrapper for getpkt_sane(), so that return
 106         value can still be ignored.
 107
 108 Tue Feb  1 18:47:31 2000  Andrew Cagney  <cagney@b1.cygnus.com>
 109
 110         * top.c (print_gdb_version): Print ``UI_OUT'' when configured with
 111         UI_OUT.
 112
 113 Tue Feb  1 00:17:12 2000  Andrew Cagney  <cagney@b1.cygnus.com>
 114
 115         * ui-file.c, ui-file.h: Rename gdb-file.h, gdb-file.c.  Rename
 116         ``struct gdb_file'' to ``struct ui_file''.  Delete typedef
 117         GDB_FILE.
 118
 119         * Makefile.in: Update.
 120
 121         * ax-gdb.c, ax-general.c, ax.h, buildsym.c, c-lang.c, c-lang.h,
 122         c-typeprint.c, c-valprint.c, ch-lang.c, ch-lang.h, ch-typeprint.c,
 123         ch-valprint.c, command.c, command.h, convex-tdep.c, corefile.c,
 124         cp-valprint.c, d10v-tdep.c, d30v-tdep.c, defs.h, expprint.c,
 125         expression.h, f-lang.c, f-lang.h, f-typeprint.c, f-valprint.c,
 126         frame.h, gdb-events.sh, gdb-file.c, gdb-file.h, gdbcmd.h,
 127         gdbtypes.h, hppa-tdep.c, jv-lang.c, jv-lang.h, jv-typeprint.c,
 128         jv-valprint.c, language.c, language.h, m2-lang.c, m2-lang.h,
 129         m2-typeprint.c, m2-valprint.c, m3-nat.c, main.c, monitor.c,
 130         printcmd.c, pyr-tdep.c, remote-mips.c, remote-sim.c, remote-udi.c,
 131         remote.c, scm-lang.c, scm-lang.h, scm-valprint.c, ser-e7kpc.c,
 132         ser-go32.c, ser-mac.c, ser-ocd.c, ser-unix.c, ser-unix.h,
 133         serial.c, serial.h, stack.c, symfile.c, symmisc.c, tahoe-tdep.c,
 134         target.c, target.h, top.c, top.h, typeprint.c, typeprint.h,
 135         utils.c, v850ice.c, valprint.c, valprint.h, value.h,
 136         config/pa/tm-hppa.h: Update.
 137         * cli-out.c, cli-out.h, ui-out.c, ui-out.h, varobj.c: Update.
 138
 139 2000-01-31  Jason Molenda  (jsm@bugshack.cygnus.com)
 140
 141         * config/alpha/alpha-osf2.mh, config/alpha/alpha-osf3.mh,
 142         config/i386/i386dgux.mh, config/i386/i386sol2.mh,
 143         config/i386/i386v4.mh, config/i386/i386v42mp.mh,
 144         config/i386/ncr3000.mh, config/m68k/m68kv4.mh,
 145         config/m88k/delta88v4.mh, config/mips/irix4.mh,
 146         config/mips/irix5.mh, config/mips/mipsv4.mh,
 147         config/powerpc/solaris.mh (NATDEPFILES): Change references to
 148         proc_api.o, proc_events.o, proc_flags.o, and proc_why.o to
 149         proc-api.o, proc-events.o, proc-flags.o, and proc-why.o.
 150
 151 Mon Jan 31 17:14:52 2000  Andrew Cagney  <cagney@b1.cygnus.com>
 152
 153         * top.c (fputs_unfiltered_hook): Moved to tui/tui-file.c.
 154
 155         * main.c (captured_main): Only use the legacy tui_file code when
 156         linking in older code such as the TUI.
 157
 158         * gdb-file.h, gdb-file.c: New files.
 159         * utils.c, defs.h (struct gdb_file, gdb_file_new, gdb_file_delete,
 160         null_file_isatty, null_file_rewind, null_file_put,
 161         null_file_flush, null_file_write, null_file_fputs,
 162         null_file_delete, gdb_file_data, gdb_flush, gdb_file_isatty,
 163         gdb_file_rewind, gdb_file_put, gdb_file_write, fputs_unfiltered,
 164         set_gdb_file_flush, set_gdb_file_isatty, set_gdb_file_rewind,
 165         set_gdb_file_put, set_gdb_file_write, set_gdb_file_fputs,
 166         set_gdb_file_data, struct accumulated_gdb_file,
 167         do_gdb_file_xstrdup, gdb_file_xstrdup, struct mem_file):
 168         mem_file_new, mem_file_delete, mem_fileopen, mem_file_rewind,
 169         mem_file_put, mem_file_write, struct stdio_file): stdio_file_new,
 170         stdio_file_delete, stdio_file_flush, stdio_file_write,
 171         stdio_file_fputs, stdio_file_isatty, stdio_fileopen, gdb_fopen):
 172         Moved to gdb-file.h and gdb-file.c.
 173         * utils.c (enum streamtype, struct tui_stream, tui_file_new,
 174         tui_file_delete, tui_fileopen, tui_sfileopen, tui_file_isatty,
 175         tui_file_rewind, tui_file_put, tui_file_fputs,
 176         tui_file_get_strbuf, tui_file_adjust_strbuf, tui_file_flush,
 177         fputs_unfiltered_hook):
 178         Moved to tui/tui-file.c and tui/tui-file.h.
 179
 180         * Makefile.in (COMMON_OBS): Add gdb-file.o, tui-file.o.
 181         (tui-file.o, gdb-file.o): Add dependencies.
 182         (corefile.o, main.o, utils.o, simmisc.o): Update dependencies.
 183         * main.c: #include tui/tui-file.h.
 184
 185 2000-01-28  Fred Fish  <fnf@cygnus.com>
 186
 187         * findvar.c (value_from_register): Special case handling of D10V
 188         pointer values fetched from registers.
 189
 190 2000-01-28  Fernando Nasser  <fnasser@totem.to.cygnus.com>
 191
 192         * arm-tdep.c (thumb_skip_prologue, thumb_scan_prologue): Add
 193         support for new style thumb prologues.
 194
 195 2000-01-28  Nick Clifton  <nickc@redhat.com>
 196
 197         * arm-tdep.c: Remove extraneous dash at start of strings
 198         introduced in previous delta.
 199
 200 2000-01-27  Nick Clifton  <nickc@redhat.com>
 201
 202         * arm-tdep.c: Replace uses of arm_toggle_renames() with
 203         parse_arm_disassembler_option().
 204
 205 2000-01-27  Jim Blandy  <jimb@cygnus.com>
 206
 207         * symtab.c (decode_line_1): Don't let commas that are within
 208         quotes or parenthesis terminate the line spec.  Don't use pp when
 209         removing the final double quote of a double-quoted string.  Don't
 210         forget to skip the opening double quote.  I have no clue whether
 211         this change is correct; probably we've just moved this function
 212         from one buggy place to another buggy place, and never came within
 213         an outhouse whiff of correctness.
 214         (find_toplevel_char): New function.
 215
 216 2000-01-27  Fernando Nasser  <fnasser@totem.to.cygnus.com>
 217
 218         * arm-tdep.c (arm_push_arguments): Set the thumb mode bit when
 219         passing the pointer to a thumb function as an argument.
 220
 221 2000-01-27  Fernando Nasser  <fnasser@totem.to.cygnus.com>
 222
 223         * remote-rdi.c (arm_rdi_mourn_inferior): Make sure breakpoints
 224         are reinserted for another run.
 225
 226 2000-01-27  Fernando Nasser  <fnasser@totem.to.cygnus.com>
 227
 228         * cli-out.c (cli_filed_string): Test for NULL string.
 229
 230 2000-01-27  Fernando Nasser  <fnasser@totem.to.cygnus.com>
 231
 232         * infcmd.c (run_stack_dummy): Account for a random signal stopping
 233         the inferior as well as breakpoints being hit while performing an
 234         inferior function call.
 235         * valops.c (hand_function_call): Ditto.
 236
 237 2000-01-27  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
 238
 239         From  Mark Kettenis  <kettenis@gnu.org>
 240
 241         * config/i386/tm-i386gnu.h (THREAD_STATE_FLAVOR): Define to
 242         i386_REGS_SEGS_STATE.
 243         (HAVE_I387_REGS): Define.
 244         (FLOAT_INFO): Remove.
 245         * i386gnu-nat.c: Almost completely rewritten to use new i386
 246         register layout and `float info' implementation.
 247         * gnu-nat.c (inf_update_procs, proc_get_state, proc_string):
 248         Move prototypes from here.
 249         * gnu-nat.h: To here.
 250
 251 2000-01-24  Kevin Buettner  <kevinb@redhat.com>
 252
 253         * utils.c (get_field, put_field): Fix buffer underruns and
 254         overruns.  Also, handle case where total_len is not evenly
 255         divisible by 8.
 256         (getfield): Make sure zeroing of unwanted bits occurs even
 257         when bit field to extract does not straddle two or more
 258         bytes.
 259
 260 2000-01-23   Christopher Faylor  <cgf@cygnus.com>
 261
 262         * defs.h: Add gdb_thread_select declaration.
 263
 264 2000-01-23  Kevin Buettner  <kevinb@redhat.com>
 265
 266         * linux-thread.c (_initialize_linuxthreads): Make sure that
 267         linuxthreads_block_mask does not block SIGCHLD.
 268
 269 2000-01-20  Fernando Nasser  <fnasser@totem.to.cygnus.com>
 270
 271         * rdi-share/devsw.c (openLogFile): On cygwin, set the log mode to
 272         text so that new lines work properly.
 273
 274 2000-01-18  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
 275
 276         * proc-utils.h: New file. Export functions from proc-*.c.
 277
 278         * proc_api.c: Rename to:
 279         * proc-api.c: New file. Add include of proc-utils.h.
 280
 281         * proc_events.c: Rename to:
 282         * proc-events.c: New file.
 283
 284         * proc_flags.c: Rename to:
 285         * proc-flags.c: New file.
 286
 287         * proc_why.c: Rename to:
 288         * proc-why.c: New file. Add include of proc-utils.h.
 289
 290         * procfs.c: Add includes of gdbthread.h, sys/wait.h, signal.h,
 291         ctype.h, proc-utils.h.
 292         (find_procinfo_or_die): Add braces to avoid ambiguous else clause.
 293         (open_procinfo_files): Conditionalize local variable tmp, to avoid
 294         compiler warnings.
 295         (proc_iterate_over_mappings): Conditionalize local vars mapfd and
 296         pathname.
 297         (procfs_wait): Adjust format in some printf_filetered calls to
 298         avoid compiler warnings.
 299         (make_signal_thread_runnable): Ifdef 0. The calls to this function
 300         are also ifdef'd 0 .
 301         (procfs_resume): Add parentheses around '&&' operation.
 302         (procfs_set_exec_trap): Remove unused variable.
 303         (info_proc_cmd): Add braces to avoid ambiguous else clause.
 304
 305         * Makefile.in (procfs.o, proc-api.o, proc-events.o, proc-flags.o,
 306         proc-why.o): Update dependencies.
 307
 308         * config/sparc/sun4sol2.mh (NATDEPFILES): Change proc_*.o files to
 309         proc-*.o.
 310
 311 2000-01-17  Jason Molenda  (jsm@bugshack.cygnus.com)
 312
 313         * configure.in (NEW_PROC_API): Fix Unixware-matching regexp.
 314         Fix from Robert Lipe <robertl@sco.com>.
 315         * configure: Regenerated.
 316
 317 2000-01-17  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
 318
 319         * stack.c (print_frame_info_base): Break up into the frame info
 320         (location) printing part and the rest (source line printing).
 321         (print_frame): New function. Take care of printing the location
 322         information.
 323         Update copyright.
 324
 325         * infrun.c (normal_stop): Use enum values rather than integers for the
 326         source_flag to be passed to show_and_print_stack_frame().
 327         Update copyright.
 328
 329         * frame.h (print_what): New enum for 'source' argument to
 330         print_frame_info_base(). Use this instead of obscure numbers.
 331         Update copyright.
 332
 333 Sun Jan 16 17:58:00 2000  David Taylor  <taylor@texas.cygnus.com>
 334
 335         * event-top.c (stdin_event_handler): call quit_command rather than
 336         exit -- run cleanups, give target code a chance to say goodbye to
 337         the target.  Fixes bug where the inferior processes were left
 338         around on Solaris (and probably elsewhere) by the testsuite.
 339
 340 2000-01-14  Mark Salter  <msalter@cygnus.com>
 341
 342         * v850-tdep.c (v850_target_architecture_hook): Setup correct
 343         machine id for disassembly.
 344
 345 2000-01-13  Jim Blandy  <jimb@cygnus.com>
 346
 347         * i386-linux-nat.c (fill_gregset): Pass the correct arguments to
 348         convert_to_regset, when regno indicates a specific register.
 349
 350 Thu Jan 13 23:34:17 EST 2000  Nicholas Duffek <nsd@cygnus.com>
 351
 352         * uw-thread.c: Document libthread.so debugging interface.  Minor
 353         comment and formatting tweaks.
 354         (DEBUG): #define as 0 instead of 1.
 355         (CALL_BASE): Include function name in error msg.
 356         (libthread_stub): Adjust inferior_pid after thread exit.
 357         (uw_thread_create_inferior): Deactivate uw_thread_ops before
 358         asking procfs_ops to create inferior.
 359         (libthread_init): Don't return nonlocally on error.
 360
 361 2000-01-12  Fernando Nasser  <fnasser@totem.to.cygnus.com>
 362
 363         * rdi-share/ardi.c (negotiate_params): Fix initialization of static
 364         variable.
 365
 366 2000-01-12  Fernando Nasser  <fnasser@totem.to.cygnus.com>
 367
 368         * remote-rdi.c (arm_rdi_open): Call arm-rdi-close() to make sure
 369         both sides are on the same state.
 370
 371 2000-01-12  Fernando Nasser  <fnasser@totem.to.cygnus.com>
 372
 373         * rdi-share/serdrv.c (find_baud_rate): Fix entries for 57600 and
 374         115200 (minor syntax mistake).
 375
 376 2000-01-12  Jim Blandy  <jimb@cygnus.com>
 377
 378         * config/sparc/tm-sun4sol2.h (MERGEPID): Provide a definition for
 379         this here, to go along with the definitions of PIDGET and TIDGET.
 380
 381 2000-01-12  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
 382
 383         * thread.c (do_captured_thread_select): New function. Switch
 384         current thread, safely from within catch_errors().
 385         (gdb_thread_select): New function. Switch threads safely.
 386         (thread_command): Use gdb_thread_select().
 387         Include ui-out.h.
 388         (do_captured_list_thread_ids): New function.
 389         (gdb_list_thread_ids): New function.
 390
 391         * defs.h (gdb_thread_select, gdb_list_thread_ids): Export.
 392
 393 2000-01-11  Christopher Faylor <cgf@cygnus.com>
 394
 395         * configure.in: Avoid linking -limagehlp unless it's a native build.
 396         * configure: Regenerate.
 397         * thread.cc (add_thread): Clear private data pointer here or suffer
 398         strange behavior when it is checked for NULL later.
 399
 400 2000-01-09  Christopher Faylor  <cgf@cygnus.com>
 401
 402         * win32nat.c (handle_exceptions): Handle various arithmetic exceptions.
 403         * configure.in: Add an additional library to cygwin link.
 404         * configure: Regenerate.
 405
 406         Patch from Egor Duda <deo@logos-m.ru>:
 407         * coffread.c (coff_symfile_read): Reinstate ability to recognize "pe"
 408         type.
 409
 410 2000-01-07  Michael Snyder  <msnyder@cleaver.cygnus.com>
 411
 412         * uw-thread.c: New file to support UnixWare user-mode threads:
 413         contributed by Nickolas Duffek  <nsd@cygnus.com>.
 414         * target.h (struct target_ops): New vector, to_extra_thread_info,
 415         allows back-ends to give extra details in info thread display.
 416         (target_extra_thread_info): define new macro.
 417         (target_find_new_threads): simplify macro.  Cleanup comments.
 418         * target.c (to_extra_thread_info): default and inherit new vector.
 419         (cleanup_target): eliminate PARAMS, break up long lines,
 420         provide default definition for to_extra_thread_info, and
 421         to_find_new_threads.  Default to_thread_alive and to_query
 422         to return_zero, not target_ignore (they each return int not void).
 423         (debug_to_find_new_threads): new debug entry.
 424         (setup_target_debug): add debug_to_find_new_threads.
 425         * gdbthread.h: export struct thread_info, find_thread_pid, and
 426         iterate_over_threads.  Add comments.  Eliminate PARAMS.  Update
 427         copyright.  Add new private data pointer for use by target back-ends.
 428         * thread.c (struct thread_info): move definition to gdbthread.h.
 429         (find_thread_pid): new exported function for thread lookup.
 430         (iterate_over_threads): new exported function for applying
 431         arbitrary operations to threads.  Update copyright to 2000.
 432         (info_threads_command): use new target_extra_thread_info vector
 433         to display extra information about each thread (if implemented).
 434         * config/i386/tm-i386v42mp.h: remove obsolete #defines for procfs.
 435         Add defines for PIDGET, etc.
 436         * config/i386/tm-i386sol2.h: ditto.
 437         * config/sparc/tm-sun4sol2.h: ditto.
 438         * config/i386/i386v42mp.mh: add uw-thread.o to NATDEPFILES.
 439         * testsuite/gdb.threads/pthreads.exp: Try to link with -lthread
 440         if -lpthread and -lpthreads fail.
 441
 442         * procfs.c: (PIDGET, TIDGET, MERGEPID): change default to no-op.
 443         (proc_flags): combine flags that UnixWare splits into two locations.
 444         (proc_modify_flag): add support for PR_KLC (kill on last close).
 445         (proc_[un]set_kill_on_last_close): new functions.
 446
 447 2000-01-07  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
 448
 449         * infrun.c (normal_stop): Print out thread id when we stop.
 450
 451 2000-01-06  Fernando Nasser  <fnasser@totem.to.cygnus.com>
 452
 453         * remote.c (remote_open_1): Fix message so it does not imply a
 454         specific syntax for serial ports, as it is OS dependent.
 455         (remote_async_open_1): Ibid.
 456         (init_remote_ops): Ibid.
 457
 458 2000-01-06  Fernando Nasser  <fnasser@totem.to.cygnus.com>
 459
 460         * rdi-share/serdrv.c (SerialOpen): Use speed from "-b" argument or
 461         "set remotebaud" command (if set) when no speed is specified on
 462         the "target rdi" command.
 463
 464 2000-01-06  Fernando Nasser  <fnasser@totem.to.cygnus.com>
 465
 466         * rdi-share/serdrv.c (find_baud_rate): Add entries for 57600 and
 467         115200.
 468         (baud_options[]): Ibid.
 469
 470 2000-01-06  Fernando Nasser  <fnasser@totem.to.cygnus.com>
 471
 472         * rdi-share/unixcomm.c: Fix SERIAL_PREFIX so it matches the prefix
 473         used by each operating system.
 474
 475 2000-01-06  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
 476
 477         * breakpoint.c (until_break_command): Add an argument for the
 478         continuation, the beginning of the cleanups set up by this
 479         command.
 480         (until_break_command_continuation): Do cleanups until the one
 481         passed in as argument instead of doing all of them.
 482
 483         * infcmd.c (finish_command_continuation): Expect a new argument,
 484         which indicates up to where to do cleanups. Update calls to
 485         do_exec_cleanups to use this marker, instead of ALL_CLEANUPS.
 486         (finish_command): Add another argument for the continuation: the
 487         starting cleanup for this command.
 488
 489 2000-01-05  Fernando Nasser  <fnasser@totem.to.cygnus.com>
 490
 491         From Grant Edwards <grante@visi.com> (original patch from Thomas
 492         Zenker ):
 493         * rdi-share/ardi.c: Allow interruption of interruptible
 494         targets with a <CNTL-C>.
 495
 496 2000-01-04  Fernando Nasser  <fnasser@totem.to.cygnus.com>
 497
 498         * rdi-share/etherdrv.c (fetch_ports): Send extra words on request
 499         to control port to accommodate some versions of Angel.
 500
 501 2000-01-04  Fernando Nasser  <fnasser@totem.to.cygnus.com>
 502
 503         * rdi-share/devsw.c (dumpPacket): Fix source of channel information.
 504         Add interpretation for C Support Library packets.
 505
 506 2000-01-04  Fernando Nasser  <fnasser@totem.to.cygnus.com>
 507
 508         * rdi-share/devsw.c (DevSW_Close): Remove const from argument that
 509         is now being modified.
 510         * rdi-share/devsw.h: Adjust declaration of the above funtion.
 511
 512 For older changes see ChangeLog-99
 513 \f
 514 Local Variables:
 515 mode: change-log
 516 left-margin: 8
 517 fill-column: 74
 518 version-control: never
 519 End: