1 2009-06-28 Paul Pluzhnikov <ppluzhnikov@google.com>
3 * mi/mi-cmds.c (mi_cmds): Remove unimplemented entries.
5 2009-06-27 Daniel Jacobowitz <dan@codesourcery.com>
6 Jan Kratochvil <jan.kratochvil@redhat.com>
8 * NEWS: Document inlined function support.
9 * Makefile.in (SFILES): Add inline-frame.c.
10 (COMMON_OBS): Add inline-frame.o.
11 * block.c (contained_in): Rewrite to use lexical nesting.
12 (block_linkage_function): Skip inlined function blocks.
13 (block_inlined_p): New.
14 * block.h (struct block): Update comment.
15 (block_inlined_p): New prototype.
16 * blockframe.c (get_frame_block): Handle inlined functions.
17 (get_frame_function): Do not use block_linkage_function.
18 (block_innermost_frame): Use get_frame_block and contained_in.
19 * breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache.
20 Skip over inlined functions. Simplify epilogue check.
21 (bpstat_check_breakpoint_conditions): Use get_stack_frame_id.
23 (set_momentary_breakpoint): Only accept non-inlined frames.
24 (watch_command_1): Use frame_unwind_caller_pc and
25 frame_unwind_caller_id instead of get_prev_frame.
26 (until_break_command): Likewise. Use get_stack_frame_id.
27 * buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions.
28 * dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function.
29 * dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine.
30 (read_func_scope, new_symbol): Likewise. Handle arguments specially
31 for inlined functions without call site information.
32 (inherit_abstract_dies): Allow tag mismatch for inlined subroutines.
33 (die_specification): Treat DW_AT_abstract_origin as a specification.
34 (read_type_die): Handle DW_TAG_inlined_subroutine.
35 * frame-unwind.c (frame_unwind_init): Add inline_frame_unwind.
36 * frame.c (fprint_frame_id): Print inline depth.
37 (fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME.
38 (skip_inlined_frames, get_stack_frame_id): New.
39 (frame_unwind_caller_id): Use skip_inlined_frames.
40 (frame_id_inlined_p): New.
41 (frame_id_eq): Make the logic match the comments. Add inline_depth
43 (frame_id_inner): Handle inlined functions.
44 (frame_unwind_pc): New function, copied from frame_unwind_caller_pc.
45 (frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc.
46 (get_prev_frame_1): Check for inline frames. Split out frame
47 allocation to get_prev_frame_raw.
48 (get_prev_frame_raw): New function.
49 (get_prev_frame): Handle inline frames.
50 (get_frame_pc): Use frame_unwind_pc.
51 (get_frame_address_in_block): Skip inlined frames on both sides.
52 (pc_notcurrent): Delete.
53 (find_frame_sal): Rewrite to handle inline call sites. Use
54 get_frame_address_in_block.
55 (deprecated_update_frame_pc_hack): Make static.
56 * frame.h: Update comments.
57 (struct frame_id): Add inline_depth.
58 (enum frame_type): Add INLINE_FRAME.
59 (frame_id_inlined_p, get_stack_frame_id): New prototypes.
60 * gdbthread.h (struct thread_info): Add step_stack_frame_id field.
61 * infcmd.c (set_step_frame): New function.
62 (step_once): Use set_step_frame. Handle inlined functions.
63 (until_next_command): Use set_step_frame.
64 (finish_backward), finish_forward): Use get_stack_frame_id.
65 (finish_command): Support inlined functions.
66 * inferior.h (set_step_info): New prototype.
67 * infrun.c (RESUME_ALL): Use minus_one_ptid.
68 (clear_proceed_status): Clear step_stack_frame_id.
69 (init_wait_for_inferior): Call clear_inline_frame_state.
70 (init_execution_control_state): Make static.
71 (set_step_info): New function.
72 (init_thread_stepping_state): Do not set the symtab or line here.
73 (stepped_in_from): New function.
74 (handle_inferior_event): Handle inlined functions. Use set_step_info.
75 (insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id.
76 (struct inferior_status): Add step_stack_frame_id.
77 (save_inferior_status, restore_inferior_status): Save and restore
79 * inline-frame.c, inline-frame.h: New files.
80 * minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC.
81 * regcache.c (regcache_write_pc): Call reinit_frame_cache.
82 * s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME.
83 * stack.c (frame_show_address): New.
84 (print_frame_info, print_frame): Use it.
85 (find_frame_funname): Use get_frame_function. Handle inlined blocks.
86 (frame_info): Mark inlined functions.
87 (backtrace_command_1): Use get_current_user_frame.
88 (print_frame_local_vars, print_frame_label_vars): Update comments.
89 (return_command): Refuse inlined functions.
90 * symtab.c (lookup_symbol_aux_local): Stop at inlined function
92 (find_function_start_sal): Avoid inlined functions.
93 (completion_list_add_fields): New function.
94 (default_make_symbol_completion_list): Use it. Use block_static_block
95 and block_global_block. Check for inlined functions.
96 (skip_prologue_using_sal): Avoid line number comparison across
98 * symtab.h (struct symbol): Add is_inlined.
99 (SYMBOL_INLINED): New.
100 * target.c (target_resume): Call clear_inline_frame_state.
101 * valops.c (value_of_variable): Check block_inlined_p.
103 2009-06-27 Daniel Jacobowitz <dan@codesourcery.com>
105 * frame.c (frame_unwind_id): Renamed to ...
106 (frame_unwind_caller_id): ... this. All callers updated.
107 (frame_pc_unwind): Renamed to ...
108 (frame_unwind_caller_pc): ... this. All callers updated.
109 * frame.h: Document frame_unwind_caller_WHAT functions.
110 (frame_unwind_id): Renamed to ...
111 (frame_unwind_caller_id): ... this.
112 (frame_pc_unwind): Renamed to ...
113 (frame_unwind_caller_pc): ... this.
114 * hppa-tdep.c (hppa_find_unwind_entry_in_block): Correct comment.
115 * stack.c (parse_frame_specification_1): Do not rely on
118 2009-06-27 Michael Snyder <msnyder@vmware.com>
120 * infrun.c (handle_inferior_event): Improve handling of
121 reverse-stepping into and over shared library functions.
123 2009-06-25 Karen Osmond <karen.osmond@gmail.com>
125 * linespec.c (find_method): Add new not_found_ptr parameter to
126 bring in line with symtab_from_filename, decode_variable.
127 (decode_compound): Likewise. Also propagate not_found_ptr to
129 (decode_line_1): Propagate not_found_ptr to decode_compound.
130 (cplusplus_error): Now throws NOT_FOUND_ERROR.
132 2009-06-25 Karen Osmond <karen.osmond@gmail.com>
134 * MAINTAINERS (Write After Approval): Add self.
136 2009-06-23 Ulrich Weigand <uweigand@de.ibm.com>
138 * valops.c (value_one): Reimplement broken decimal-float case.
140 2009-06-23 Ulrich Weigand <uweigand@de.ibm.com>
142 * eval.c (evaluate_subexp_standard): Use expression architecture
143 instead of current_gdbarch.
145 * infrun.c (handle_inferior_event): Avoid unncessary reference
146 to current_gdbarch and get_current_frame ().
148 2009-06-23 Ulrich Weigand <uweigand@de.ibm.com>
150 * breakpoint.h (set_longjmp_breakpoint): Add THREAD argument.
151 (enum bptype): Add bp_longjmp_master.
153 * breakpoint.c (create_longjmp_master_breakpoint): New function.
154 (update_breakpoints_after_exec): Handle bp_longjmp_master
155 breakpoints. Call create_longjmp_master_breakpoint.
156 (print_it_typical, bpstat_stop_status, bpstat_what,
157 print_one_breakpoint_location, allocate_bp_location, mention,
158 delete_command, breakpoint_re_set_one): Handle bp_longjmp_master.
159 (breakpoint_re_set): Call create_longjmp_master_breakpoint.
160 (create_longjmp_breakpoint): Delete.
161 (set_longjmp_breakpoint): Add THREAD argument. Reimplement
162 to install momentary clones of bp_longjmp_master breakpoints.
164 * infcmd.c (step_1): Pass thread to set_longjmp_breakpoint.
166 2009-06-23 Cary Coutant <ccoutant@google.com>
168 * dwarf2read.c (dwarf_decode_lines): Ignore rows where is_stmt is 0.
169 Set basic_block to 0 after a special opcode.
171 2009-06-23 Jan Kratochvil <jan.kratochvil@redhat.com>
173 Fix a regression by the mmap patch from 2009-06-16.
174 * symfile.c (reread_symbols): Move sym_finish and clear_objfile_data
175 calls before deleting the OBJFILE obstack. Extend the comment.
177 2009-06-23 Ulrich Weigand <uweigand@de.ibm.com>
179 * jv-lang.h (JAVA_OBJECT_SIZE): Remove.
180 (get_java_object_header_size): Add GDBARCH parameter.
181 * jv-lang.c (get_java_object_header_size): Add GDBARCH parameter.
182 Use it instead of current_gdbarch.
183 (evaluate_subexp_java): Replace JAVA_OBJECT_SIZE with call to
184 get_java_object_header_size.
185 * jv-valprint.c (java_value_print): Likewise.
187 2009-06-23 Sami Wagiaalla <swagiaal@redhat.com>
189 * dwarf2read.c (process_die): Handle import statements
190 (DW_TAG_imported_declaration, case DW_TAG_imported_module)
191 (read_import_statement): New.
192 (read_func_scope): Update using_directives to point to current context
193 (read_lexical_block_scope): Ditto.
194 * cp-support.h: Added prototype for cp_add_using.
195 * cp-namespace.c: Removed local context_stack.
196 (cp_initialize_namespace): Deleted.
197 (cp_finalize_namespace): Deleted.
198 (cp_add_using_directive): Use using_directives instead of using_list.
199 (cp_add_using): No longer static.
200 * buildsym.h: Created global using_direct variable.
201 Created using_direct variable in context_stack.
202 * buildsym.c (finish_block): Set using directives for the block under
204 (start_symtab): Removed call to cp_initialize_namespace().
205 (end_symtab): Removed call to cp_finalize_namespace().
206 (push_context): Save and reset using_directives.
207 * block.c (block_using): Return using directives for given
208 block instead of static block.
210 2009-06-23 Ulrich Weigand <uweigand@de.ibm.com>
212 * target-descriptions.h (struct type): Do not declare.
213 (struct tdesc_type): Declare.
214 (tdesc_named_type): Change return type to struct tdesc_type *.
215 (tdesc_record_type): Remove.
216 (tdesc_create_vector): Add prototype.
217 (tdesc_create_union): Likewise.
218 (tdesc_add_field): Likewise.
220 * target-descriptions.c (struct tdesc_reg): Replace gdb_type
221 member by tdesc_type member.
222 (struct tdesc_type_field, tdesc_type_field): Add type and vector def.
223 (struct tdesc_type, tdesc_type_p): Likewise.
224 (struct tdesc_arch_reg, tdesc_arch_reg): Likewise.
225 (struct tdesc_feature): Change type of "types" to VEC(tdesc_type_p).
226 (struct tdesc_arch_data): Replace registers member by arch_regs.
228 (tdesc_predefined_types): Change to array of pre-defined
229 struct tdesc_type structures. Add "code_ptr" and "data_ptr".
230 (tdesc_named_type): Return struct tdesc_type * instead of GDB type.
231 (tdesc_gdb_type): New function.
233 (target_find_description): Update for data structure changes.
234 (tdesc_data_cleanup): Likewise.
235 (tdesc_numbered_register): Likewise.
236 (tdesc_use_registers): Likewise.
237 (tdesc_create_reg): Likewise.
239 (tdesc_find_arch_register): New function.
240 (tdesc_find_register): Use it.
241 (tdesc_register_type): Use tdesc_gdb_type to generate GDB type from
242 tdesc_type on demand; cache generated types in tdesc_arch_reg.
244 (tdesc_free_type): New function.
245 (tdesc_free_feature): Call it.
247 (tdesc_create_vector): New function.
248 (tdesc_create_union): Likewise.
249 (tdesc_add_field): Likewise.
250 (tdesc_record_type): Remove.
252 (tdesc_type_id): Remove.
253 (maint_print_c_tdesc_cmd): Update for data structure changes. Update
254 generated code to create tdesc_type structures instead of GDB types.
256 * xml-tdesc.c: Do not include "gdbtypes.h".
257 (struct tdesc_parsing_data): Change type of current_union to
259 (tdesc_start_reg): Do not special-case "code_ptr" or "data_ptr".
260 (tdesc_start_union): Call tdesc_create_union.
261 (tdesc_start_field): Call tdesc_add_field.
262 (tdesc_start_vector): Call tdesc_create_vector.
263 (tdesc_end_union): Remove.
264 (feature_children): Remove reference to tdesc_end_union.
266 * features/arm-with-iwmmxt.c: Regenerate.
267 * features/mips-linux.c: Regenerate.
268 * features/mips64-linux.c: Regenerate.
269 * features/rs6000/powerpc-32.c: Regenerate.
270 * features/rs6000/powerpc-32l.c: Regenerate.
271 * features/rs6000/powerpc-403.c: Regenerate.
272 * features/rs6000/powerpc-403gc.c: Regenerate.
273 * features/rs6000/powerpc-505.c: Regenerate.
274 * features/rs6000/powerpc-601.c: Regenerate.
275 * features/rs6000/powerpc-602.c: Regenerate.
276 * features/rs6000/powerpc-603.c: Regenerate.
277 * features/rs6000/powerpc-604.c: Regenerate.
278 * features/rs6000/powerpc-64.c: Regenerate.
279 * features/rs6000/powerpc-64l.c: Regenerate.
280 * features/rs6000/powerpc-7400.c: Regenerate.
281 * features/rs6000/powerpc-750.c: Regenerate.
282 * features/rs6000/powerpc-860.c: Regenerate.
283 * features/rs6000/powerpc-altivec32.c: Regenerate.
284 * features/rs6000/powerpc-altivec32l.c: Regenerate.
285 * features/rs6000/powerpc-altivec64.c: Regenerate.
286 * features/rs6000/powerpc-altivec64l.c: Regenerate.
287 * features/rs6000/powerpc-e500.c: Regenerate.
288 * features/rs6000/powerpc-e500l.c: Regenerate.
289 * features/rs6000/powerpc-isa205-32l.c: Regenerate.
290 * features/rs6000/powerpc-isa205-64l.c: Regenerate.
291 * features/rs6000/powerpc-isa205-altivec32l.c: Regenerate.
292 * features/rs6000/powerpc-isa205-altivec64l.c: Regenerate.
293 * features/rs6000/powerpc-isa205-vsx32l.c: Regenerate.
294 * features/rs6000/powerpc-isa205-vsx64l.c: Regenerate.
295 * features/rs6000/powerpc-vsx32.c: Regenerate.
296 * features/rs6000/powerpc-vsx32l.c: Regenerate.
297 * features/rs6000/powerpc-vsx64.c: Regenerate.
298 * features/rs6000/powerpc-vsx64l.c: Regenerate.
299 * features/rs6000/rs6000.c: Regenerate.
301 2009-06-23 Joel Brobecker <brobecker@adacore.com>
303 * ada-lang.c (decode_packed_array): If the value is a pointer to
304 an array, then use value_ind to dereference it, not ada_value_ind.
305 (ada_template_to_fixed_record_type_1): Handle the case where a
306 dynamic field is an aligner type.
307 (to_fixed_array_type): Add handling for packed array types.
308 (ada_get_base_type): Do not follow the XVS type if the type is
310 (ada_evaluate_subexp): Split a few statements up for clarity
312 <OP_FUNCALL>: Add handling of the case of a packed array that
313 has already been fixed.
315 2009-06-23 Joel Brobecker <brobecker@adacore.com>
317 * ada-lang.c (evaluate_subexp): Delete. Use the version from eval.c.
318 (evaluate_subexp_type): Reimplement using evaluate_subexp.
319 * value.h (evaluate_subexp): Add declaration.
320 * eval.c (evaluate_subexp): Make non-static.
321 * objc-lang.c (print_object_command): Use evaluate_subexp.
323 2009-06-23 Paul Pluzhnikov <ppluzhnikov@google.com>
325 Revert 2009-05-14 breakpoint commit (no longer needed).
326 * breakpoint.h (breakpoint_re_set_objfile): Remove
327 * breakpoint.c (breakpoint_re_set_objfile): Likewise
328 (create_overlay_event_breakpoint): Remove objfile parameter,
329 iterate over all objfiles.
330 * objfiles.c (objfile_relocate): Update.
331 * symfile.c (new_symfile_objfile): Likewise.
333 2009-06-23 Tom Tromey <tromey@redhat.com>
336 * c-lang.c (classify_type): Iterate over typedefs.
337 * c-valprint.c (textual_element_type): Iterate over typedefs.
339 2009-06-22 Tristan Gingold <gingold@adacore.com>
341 * darwin-nat.c (darwin_xfer_partial): Use host_address_to_string
344 2009-06-22 Jan Kratochvil <jan.kratochvil@redhat.com>
347 * buildsym.c (block_compar): New function.
348 (end_symtab): Replace the bubble sort by a qsort based code.
350 2009-06-22 Sami Wagiaalla <swagiaal@redhat.com>
352 * MAINTAINERS (Write After Approval): Add self.
354 2009-06-22 Ulrich Weigand <uweigand@de.ibm.com>
356 * spu-tdep.c (spu_get_longjmp_target): New function.
357 (spu_gdbarch_init): Install it.
359 2009-06-22 H.J. Lu <hongjiu.lu@intel.com>
362 * remote.c (getpkt_or_notif_sane_1): Initialize val to -1.
364 2009-06-21 Michael Snyder <msnyder@vmware.com>
366 * inferior.h: Update ancient comment.
368 2009-06-20 Aleksandar Ristovski <aristovski@qnx.com>
369 Pedro Alves <pedro@codesourcery.com>
371 * solib-svr4.c (IGNORE_FIRST_LINK_MAP_ENTRY): Avoid dereferencing
373 (scan_dyntag): Skip if input bfd isn't elf flavoured.
374 (locate_base): Call elf_locate_base even without an exec_bfd.
376 2009-06-19 Samuel Bronson <naesten@gmail.com>
379 * cli/cli-decode.c (apropos_cmd): Skip traversing abbreviations
380 for prefix commands to avoid duplicates in the output.
382 2009-06-19 Samuel Bronson <naesten@gmail.com>
385 * cli/cli-decode.c (apropos_cmd): Fix avoidance of double
388 2009-06-19 Jerome Guitton <guitton@adacore.com>
390 * breakpoint.c (expand_line_sal_maybe): When explicit_line,
391 skip prologue on each sals.
392 (skip_prologue_sal): Return explicit_line and explicit_pc
395 2009-06-19 Tristan Gingold <gingold@adacore.com>
397 * darwin-nat.c (_initialize_darwin_inferior): Remove commented-out
400 2009-06-19 Tristan Gingold <gingold@adacore.com>
401 * machoread.c (macho_symtab_read): Adjust for bfd changes.
402 * darwin-nat.h (struct darwin_exception_msg): New type to describe
404 (struct private_thread_info): New type to describe the state of the
406 (DEF_VEC_I thread_t): Removed, replaced by ...
407 (DEF_VEC_O darwin_thread_t): ... this new type.
408 (struct darwin_inferior): Renamed to ...
409 (struct private_inferior): ... this type. Fields added.
410 (darwin_not_port): Moved into the private inferior structure.
411 * darwin-nat.c: Add includes, improve comments.
412 Rewrite to handle multiple threads and processes.
413 (darwin_resume_to): New function and protype.
414 (darwin_resume, darwin_wait_to, darwin_wait): Ditto.
415 (darwin_kill_inferior): Add ops argument.
416 (darwin_pid_to_str): New function.
417 (darwin_thread_alive): Ditto.
418 (darwin_inf, darwin_not_port): Removed.
419 (darwin_inf_fake_stop): New variable.
420 (msgin, msgout, msg_state, exc_msg): Removed.
421 (mach_check_error): Use warning instead of error.
422 (darwin_ptrace): Adjust debug level.
423 (cmp_thread_t): Fix names (typo).
424 (darwin_check_new_threads): Argument is now an inferior,
425 adjust for new structures, add no change check, ignore dead ports,
426 handle first thread case.
427 (find_inferior_task_it): New function.
428 (find_inferior_notify_it): Ditto.
429 (darwin_find_inferior_by_task): Ditto.
430 (darwin_find_inferior_by_notify): Ditto.
431 (darwin_find_thread): Ditto.
432 (darwin_suspend_inferior): Ditto.
433 (darwin_resume_inferior): Ditto.
434 (catch_exception_raise_state): Removed.
435 (catch_exception_raise_state_identity): Removed.
436 (darwin_suspend_inferior_it): New function.
437 (darwin_resume_inferior_it): Ditto.
438 (darwin_dump_message): New function, extracted from darwin_wait.
439 (darwin_decode_exception_message): New function.
440 (darwin_encode_reply): New function.
441 (catch_exception_raise): Removed.
442 (darwin_send_reply): New function, extracted from darwin_resume.
443 (darwin_resume_thread): New function, extracted from darwin_resume.
444 (struct resume_inferior_threads_param): New type.
445 (darwin_resume_inferior_threads_it): New function.
446 (darwin_resume_inferior_threads): New function.
447 (darwin_suspend_inferior_threads): New function.
448 (darwin_resume): Mostly rewritten to handle multiple threads and
450 (darwin_decode_message): New function extracted from darwin_wait.
451 (cancel_breakpoint): New function.
452 (darwin_wait): Mostly rewritten. Handle multiple threads.
453 (darwin_mourn_inferior): Adjust for per process structures.
454 (darwin_reply_to_all_pending_messages): New function.
455 (darwin_stop_inferior): Adjust for per inferior structures.
456 (darwin_attach_pid): Ditto.
457 (darwin_init_thread_list): Ditto.
458 (darwin_attach): Ditto.
459 (darwin_detach): Ditto.
460 (darwin_files_info): Now empty.
461 (darwin_pid_to_str): Adjust returns string to match one expected by
463 (darwin_read_write_inferior): Rename err variable to match other uses.
464 Adjust debug message. Handle submaps.
465 (darwin_xfer_memory): Adjust for per inferior structures.
466 (set_enable_mach_exceptions): Ditto.
467 (darwin_pid_to_exec_file): New function.
468 (darwin_get_ada_task_ptid): Ditto.
469 (darwin_supports_multi_process): Ditto.
470 (_initialize_darwin_inferior): Remove useless assertion, adjust for
471 per inferior structures. Add new target operations.
473 2009-06-18 Hui Zhu <teawater@gmail.com>
474 Michael Snyder <msnyder@vmware.com>
476 * infrun.c (handle_inferior_event): Improve reverse stepping
477 through function epilogue.
479 * infrun.c (handle_inferior_event): Reverse-next through
482 2009-06-18 Paul Pluzhnikov <ppluzhnikov@google.com>
484 * dwarf2-frame.c (struct comp_unit): Use bfd_size_type for
487 2009-06-17 Tom Tromey <tromey@redhat.com>
489 * dwarf2read.c (zlib_decompress_section): Use a cleanup.
491 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
493 * gdbarch.sh (pointer_to_address): Change to type 'm'.
494 (address_to_pointer): Likewise.
495 * gdbarch.c, gdbarch.h: Regenerate.
497 * inferior.h (unsigned_pointer_to_address): Add GDBARCH argument.
498 (signed_pointer_to_address): Likewise.
499 (unsigned_address_to_pointer, address_to_signed_pointer): Likewise.
500 * findvar.c (unsigned_pointer_to_address): Likewise.
501 (signed_pointer_to_address): Likewise.
502 (unsigned_address_to_pointer, address_to_signed_pointer): Likewise.
504 * avr-tdep.c (avr_address_to_pointer): Likewise.
505 (avr_pointer_to_address): Likewise.
506 * iq2000-tdep.c (iq2000_pointer_to_address): Likewise.
507 (iq2000_address_to_pointer): Likewise.
508 * m32c-tdep.c (m32c_m16c_address_to_pointer): Likewise.
509 (m32c_m16c_pointer_to_address): Likewise.
510 * spu-tdep.c (spu_pointer_to_address): Likewise.
511 * xstormy16-tdep.c (xstormy16_pointer_to_address): Likewise.
512 (xstormy16_address_to_pointer): Likewise.
514 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
516 * printcmd.c (print_scalar_formatted): Always truncate
519 * cli-dump.c (struct callback_data): Change type of load_offset
521 (restore_binary_file): Update type casts.
522 (restore_command): Parse load_offset as address, not long.
524 * utils.c (string_to_core_addr): Do not sign-extend value.
525 * varobj.c (find_frame_addr_in_frame_chain): Truncate frame_base
526 before comparing against requested frame address.
528 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
530 * gdbarch.sh (gcore_bfd_target): New gdbarch callback.
531 * gdbarch.h, gdbarch.c: Regenerate.
533 * gcore.c (default_gcore_target): Make return value const.
534 Call gdbarch_gcore_bfd_target if present.
535 (default_gcore_arch, default_gcore_mach): Use target_gdbarch.
537 * corelow.c (core_read_description): Call gdbarch_core_read_description
538 on core_gdbarch instead of current_gdbarch.
540 * ppc-linux-tdep.c (ppc_linux_init_abi): Install gcore_bfd_target.
542 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
544 * gdbtypes.c (create_string_type): Receive character type as argument.
545 * gdbtypes.h (create_string_type): Add character type argument.
546 * dwarf2read.c (read_tag_string_type): Pass character type to
549 * value.h (value_string): Add character type argument.
550 * valops.c (value_string): Add character type argument. Pass it to
551 create_string_type. Do not allocate space in inferior.
552 * valarith.c (value_concat): Pass character type to value_string.
554 * value.h (value_typed_string): Rename to ...
555 (value_cstring): ... this.
556 * valops.c (value_typed_string): Rename to ...
557 (value_cstring): ... this.
558 * c-lang.c (evaluate_subexp_c): Update.
560 * python/python-value.c (builtin_type_pychar): New define.
561 (convert_value_from_python): Call value_cstring instead
562 of value_from_string.
563 * value.c (value_from_string): Remove.
564 * value.h (value_from_string): Remove.
566 * eval.c (evaluate_subexp_standard): Pass character type to
567 value_string. Pass expression architecture to value_nsstring
568 and lookup_child_selector.
569 * objc-lang.h (lookup_objc_class): Add GDBARCH parameter.
570 (lookup_child_selector): Likewise.
571 (value_nsstring): Likewise.
572 * objc-lang.c (lookup_objc_class): Add GDBARCH parameter.
573 Pass character type to value_string..
574 (lookup_child_selector): Likewise.
575 (value_nsstring): Add GDBARCH parameter, use it instead of
576 objfile architecture. Pass architecture to lookup_objc_class
577 and lookup_child_selector. Pass character type to value_string.
578 (end_msglist): Pass architecture to lookup_objc_class.
579 * objc-exp.y: Pass architecture to lookup_objc_class.
581 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
583 * gdbtypes.h (struct language_defn): Add forward declaration.
584 (lookup_typename): Add LANGUAGE and GDBARCH parameters.
585 (lookup_unsigned_typename): Likewise.
586 (lookup_signed_typename): Likewise.
587 * gdbtypes.c (lookup_typename): Add LANGUAGE and GDBARCH parameters.
588 Use them instead of current_language and current_gdbarch.
589 (lookup_unsigned_typename): Add LANGUAGE and GDBARCH parameters.
590 Pass them to lookup_typename.
591 (lookup_signed_typename): Likewise.
593 * c-exp.y: Pass parse_language and parse_gdbarch to
594 lookup_unsigned_typename and lookup_signed_typename.
595 * objc-exp.y: Likewise.
596 * m2-exp.y: Pass parse_language and parse_gdbarch to lookup_typename.
598 * c-lang.c (evaluate_subexp_c): Pass expression language and
599 gdbarch to lookup_typename.
600 * printcmd.c (printf_command): Pass current language and
601 gdbarch to lookup_typename.
602 * python/python-type.c (typy_lookup_typename): Likewise.
603 Include "language.h".
605 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
607 * sparc64-nat.c (sparc64_gregset_supplies_p): Add GDBARCH parameter.
608 Use it instead of current_gdbarch. Pass architecture to
609 sparc32_gregset_supplies_p.
610 (sparc64_fpregset_supplies_p): Add GDBARCH parameter. Use it instead
611 of current_gdbarch. Pass architecture to sparc32_fpregset_supplies_p.
612 * sparc64nbsd-nat.c (sparc64nbsd_gregset_supplies_p,
613 sparc64nbsd_fpregset_supplies_p): Likewise.
614 * sparc-nat.c (sparc_gregset_supplies_p, sparc_fpregset_supplies_p):
615 Add GDBARCH parameter.
616 (sparc32_gregset_supplies_p, sparc32_fpregset_supplies_p): Likewise.
617 (sparc_fetch_inferior_registers): Pass regcache architecture to
618 sparc_gregset_supplies_p and sparc_fpregset_supplies_p.
619 (sparc_store_inferior_registers): Likewise.
620 * sparc-nat.h (sparc_gregset_supplies_p, sparc_fpregset_supplies_p:
621 Add GDBARCH parameter.
622 (sparc32_gregset_supplies_p, sparc32_fpregset_supplies_p): Likewise.
624 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
626 * ada-tasks.c (read_known_tasks_array): Use target_gdbarch instead
628 * aix-thread.c (pd_enable): Likewise.
629 * amd64-linux-nat.c (ps_get_thread_area): Likewise.
630 * bsd-uthread.c (bsd_uthread_activate): Likewise.
631 * linux-nat.c (linux_nat_info_proc_cmd): Likewise.
632 * linux-thread-db.c (enable_thread_event): Likewise.
633 * monitor.c (monitor_write_memory, monitor_read_memory): Likewise.
634 * nto-procfs.c (procfs_open): Likewise.
635 * procfs.c (invalidate_cache, procfs_insert_watchpoint,
636 info_proc_mappings, info_mappings_callback): Likewise.
637 * record.c (record_open): Likewise.
638 * rs6000-nat.c (ARCH64): Likewise.
639 * solib-darwin.c (darwin_solib_create_inferior_hook): Likewise.
640 (darwin_bfd_open): Likewise.
641 * memattr.c (mem_info_command): Likewise.
643 * windows-nat.c (win32_resume): Use current regcache architecture
644 instead of current_gdbarch.
646 * dbug-rom.c (dbug_regname): Remove check against number of
647 registers in current_gdbarch.
648 * solib-pa64.c (read_dynamic_info): Remove unused variable.
650 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
652 * dummy-frame.c (deprecated_pc_in_call_dummy): Add GDBARCH parameter,
653 use it instead of current_gdbarch.
654 * frame.h (deprecated_pc_in_call_dummy): Add GDBARCH parameter.
655 * arm-tdep.c (arm_skip_prologue): Pass architecture to
656 deprecated_pc_in_call_dummy.
658 * symtab.c (skip_prologue_using_sal): Add GDBARCH parameter.
659 Use it instead of current_gdbarch.
660 * symtab.h (skip_prologue_using_sal): Add GDBARCH parameter.
661 * breakpoint.c (expand_line_sal_maybe): Pass architecture to
662 skip_prologue_using_sal.
663 * arm-tdep.c (skip_prologue_using_sal): Likewise.
664 * lm32-tdep.c (lm32_skip_prologue): Likewise.
665 * m32-tdep.c (m32c_skip_prologue): Likewise.
666 * mips-tdep.c (mips_skip_prologue): Likewise.
667 * moxie-tdep.c (moxie_skip_prologue): Likewise.
668 * mt-tdep.c (mt_frame_unwind_cache): Likewise.
669 * rs6000-tdep.c (rs6000_skip_prologue): Likewise.
670 * frv-tdep.c (frv_analyze_prologue): Add GDBARCH parameter, pass
671 it to skip_prologue_using_sal. Update call sites ...
672 (frv_skip_prologue, frv_frame_unwind_cache): ... here.
674 * mn10300-tdep.c (struct mn10300_prologue): Add GDBARCH member.
675 (check_for_saved): Use it instead of current_gdbarch.
676 (mn10300_analyze_prologue): Set it.
678 * value.c (using_struct_return): Add GDBARCH parameter. Use it
679 instead of current_gdbarch.
680 * value.h (using_struct_return): Add GDBARCH parameter.
681 * eval.c (evaluate_subexp_standard): Pass architecture to
683 * infcall.c (call_function_by_hand): Likewise.
684 * stack.c (return_command): Likewise.
685 * sparc-tdep.c (sparc32_push_dummy_code): Likewise.
687 * symtab.c (in_prologue): Add GDBARCH parameter. Use it instead of
689 * symtab.h (in_prologue): Add GDBARCH parameter.
690 * infrun.c (handle_inferior_event): Pass architecture to in_prologue.
692 * eval.c (evaluate_subexp_standard): Use expression architecture
693 instead of current_gdbarch.
695 * c-lang.c (evaluate_subexp_c): Use expression architecture and
696 language instead of current_gdbarch and current_language.
698 * printcmd.c (do_one_display): Use expression architecture instead
701 * infcmd.c (print_return_value): Use architecture of stop_regcache
702 instead of current_gdbarch.
703 (print_vector_info, print_float_info): Remove GDBARCH argument,
704 use frame architecture instead.
705 (vector_info, float_info): Update calls.
707 * objc-lang.c (objc_skip_trampoline): Use frame architecture
708 instead of current_gdbarch.
710 * parse.c (write_dollar_variable): Use parse architecture instead
713 * source.c (line_info): Use objfile architecture instead of
716 * symtab.c (find_function_start_sal): Use gdbarch instead of
718 (print_msymbol_info): Use objfile architecture instead of
721 * valops.c (value_assign): Use frame architecture instead of
724 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
726 * buildsym.c (record_line): Remove call to gdbarch_addr_bits_remove.
728 * coffread.c (coff_symtab_read): Call gdbarch_addr_bits_remove before
730 (enter_linenos): Likewise.
731 * dbxread.c (process_one_symbol): Likewise.
732 * dwarf2read.c (dwarf_decode_lines): Likewise.
733 * mdebugread.c (psymtab_to_symtab_1): Likewise.
734 * xcoffread.c (enter_line_range): Likewise.
736 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
738 * ax-gdb.c (gen_bitfield_ref): Add EXP argument, use expression
739 architecture instead of current_gdbarch.
740 (gen_struct_ref): Add EXP argument, pass to get_bitfield_ref.
741 (gen_expr): Pass expression to get_struct_ref.
743 * symtab.h (struct symbol_ops): Add GDBARCH parameter to
744 tracepoint_var_ref callback.
745 * ax-gdb.c (gen_var_ref): Pass architecture to tracepoint_var_ref
746 symbol operation callback.
747 * dwarf2loc.c (dwarf2_tracepoint_var_ref): Add GDBARCH parameter.
748 Use it instead of current_gdbarch.
749 (locexpr_tracepoint_var_ref): Add GDBARCH parameter. Pass it to
750 dwarf2_tracepoint_var_ref.
751 (loclist_tracepoint_var_ref): Likewise.
753 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
755 * prologue-value.c (make_pv_area): Add ADDR_BIT argument.
756 Use it instead of address bits of current_gdbarch.
757 * prologue-value.c (make_pv_area): Add ADDR_BIT argument.
758 * arm-tdep.c (thumb_analyze_prologue): Pass address bits to
760 (arm_scan_prologue): Likewise.
761 * m32c-tdep.c (m32c_analyze_prologue): Likewise.
762 * mep-tdep.c (mep_analyze_prologue): Likewise.
763 * mn10300-tdep.c (mn10300_analyze_prologue): Likewise.
764 * s390-tdep.c (s390_analyze_prologue): Likewise.
766 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
768 * mi/mi-main.c (mi_cmd_data_list_register_names): Use selected
769 frame architecture instead of current_gdbarch.
770 (mi_cmd_data_list_changed_registers): Likewise.
771 (mi_cmd_data_list_register_values): Likewise. Pass selected
772 frame to get_register.
773 (get_register): Add FRAME argument, use it as frame to retrieve
774 registers from (instead of selected frame). Use frame architecture
775 instead of current_gdbarch.
776 (mi_cmd_data_write_register_values): Use current regcache
777 architecture instead of current_gdbarch.
779 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
781 * tui/tui-regs.c (tui_show_register_group): Remove GDBARCH parameter;
782 use frame architecture instead. Replace current_gdbarch uses.
783 (tui_show_registers): Update call.
784 (tui_get_register): Remove GDBARCH parameter; use frame architecture
786 (tui_show_register_group): Update call.
787 (tui_check_register_values): Likewise.
788 (tui_register_format): Remove GDBARCH parameter; use frame
789 architecture instead. Replace current_gdbarch uses.
790 (tui_get_register): Update call.
792 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
794 * gdbarch.sh (construct_inferior_arguments): Remove.
795 * gdbarch.c, gdbarch.h: Regenerate.
796 * infcmd.c (get_inferior_args): Call construct_inferior_arguments
797 directly instead of gdbarch_construct_inferior_arguments.
798 (construct_inferior_arguments): Remove GDBARCH argument.
799 * inferior.h (construct_inferior_arguments): Likewise.
801 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
803 * symfile.c (section_is_mapped): Use objfile architecture instead
805 (TARGET_LONG_BYTES): Remove.
806 (read_target_long_array): Add SIZE argument. Use it instead of
808 (simple_read_overlay_table): Retrieve long size from objfile
809 architecture; pass it to read_target_long_array.
810 (simple_read_overlay_region_table): Likewise.
811 (simple_overlay_update_1): Likewise.
813 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
815 * infrun.c (cleanup_displaced_step_closure): Remove.
816 (displaced_step_clear_cleanup): Move to before displaced_step_prepare.
817 (displaced_step_prepare): Use displaced_step_clear_cleanup instead
818 of cleanup_displaced_step_closure.
819 (handle_inferior_event, keep_going): Use thread architecture instead
822 2009-06-17 Ulrich Weigand <uweigand@de.ibm.com>
824 * infrun.c (handle_inferior_event): Use current frame architecture
825 or thread architecture instead of current_gdbarch. Pass to
826 handle_step_into_function and handle_step_into_function_backward.
827 (handle_step_into_function): Add GDBARCH parameter. Use it instead
829 (handle_step_into_function_backward): Likewise.
830 (insert_step_resume_breakpoint_at_frame): Use frame architecture
831 instead of current_gdbarch.
832 (insert_step_resume_breakpoint_at_caller): Likewise.
834 2009-06-17 Pierre Muller <muller@ics.u-strasbg.fr>
835 Pedro Alves <pedro@codesourcery.com>
837 * infcmd.c (post_create_inferior): Call breakpoint_re_set after target
838 is pushed for watchpoint promotion to hardware watchpoint.
840 2009-06-16 Paul Pluzhnikov <ppluzhnikov@google.com>
842 * dwarf2read.c (dwarf_info_section, dwarf_abbrev_section)
843 (dwarf_line_section, dwarf_pubnames_section, dwarf_aranges_section)
844 (dwarf_loc_section, dwarf_macinfo_section, dwarf_str_section)
845 (dwarf_ranges_section, dwarf_frame_section)
846 (dwarf_eh_frame_section): Removed.
847 (dwarf2_resize_section): Likewise.
848 (dwarf2_read_section): Now static, use bfd_mmap() if possible.
849 (dwarf2_get_section_info): New function.
850 (munmap_section_buffer): Likewise.
851 (dwarf2_per_objfile_cleanup): Likewise.
852 (section_is_p): Signature change.
853 * dwarf2-frame.c (dwarf2_build_frame_info): Use
854 dwarf2_get_section_info instead of dwarf2_read_section.
856 2009-06-16 Paul Pluzhnikov <ppluzhnikov@google.com>
858 * solib.c (symbol_add_stub): New FLAGS parameter.
859 (solib_read_symbols): FROM_TTY -> FLAGS, call symbol_add_stub
861 (solib_add): Defer breakpoint_re_set until after all solibs.
862 * bsd-uthread.c (bsd_uthread_solib_loaded): Adjust.
863 * rs6000-nat.c (objfile_symbol_add): Adjust.
864 * symfile.c (syms_from_objfile): Merge parameters into ADD_FLAGS.
865 (new_symfile_objfile): Likewise.
866 (symbol_file_add_with_addrs_or_offsets): Likewise.
867 (symbol_file_add_from_bfd): Likewise.
868 (symbol_file_add): Likewise.
869 * symfile.h (enum symfile_add_flags): New. Adjust prototypes.
870 * symfile-mem.c (symbol_file_add_from_memory): Adjust.
871 * windows-nat.c (safe_symbol_file_add_stub): Adjust.
872 * machoread.c (macho_oso_symfile, macho_symfile_read): Adjust.
874 2009-06-16 Keith Seitz <keiths@redhat.com>
876 * linespec.c (collect_methods): Delete.
877 (add_matching_methods): Reove destructor special case.
878 (find_method): Call find_methods directly instead of
880 * valops.c (value_struct_elt): Remove destructor
882 (check_field): Likewise.
883 (value_struct_elt_for_reference): Likewise.
884 (destructor_name_p): Remove misleading comment about dtors
885 being "special cases".
886 * gdbtypes.h (get_destructor_fn_field): Remove. No longer needed.
887 * gdbtypes.c (get_destructor_fn_field): Likewise.
889 2009-06-16 Pedro Alves <pedro@codesourcery.com>
891 * mi/mi-main.c (mi_cmd_data_read_memory): Dispatch
892 TARGET_OJECT_MEMORY reads to the topmost target, not to the
893 flattened current_target.
895 2009-06-16 Tristan Gingold <gingold@adacore.com>
897 * avr-tdep.c (struct gdbarch_tdep): Replace the unused field with
899 (avr_register_name): Add const to register_names.
900 (avr_scan_arg_moves): Move inside avr_scan_prologue.
901 (avr_scan_prologue): Add pc_end argument.
902 Only read prologue bytes that can be read.
903 Limit the scan to the known prologue length.
904 Makes pattern variables static and const.
906 (avr_skip_prologue): Pass func_end argument to avr_scan_prologue.
908 (avr_breakpoint_from_pc): Constify avr_break_insn.
909 (avr_extract_return_value): Fix function comment.
910 (avr_frame_unwind_cache): Fix GNU style violations.
911 Pass current_pc argument to avr_scan_prologue to stop prologue
912 analysis to the current pc. This fixes the bug with the 'next'
914 Correctly set the SP register of the previous frame (use call_length).
915 (avr_frame_prev_register): Fix indentation.
916 Correctly read PC from the stack on avr6 architectures.
917 (avr_push_dummy_call): Fix indentation.
918 (avr_gdbarch_init): Set call_length according to the architecture.
920 2009-06-15 Phil Muldoon <pmuldoon@redhat.com>
922 * infcall.c (show_unwind_on_terminating_exception_p): New
924 (call_function_by_hand): Create breakpoint and clean-up call for
925 std::terminate.breakpoint. Add unwind_on_terminating_exception_p
926 gate. Pop frame on breakpoint hit.
927 (_initialize_infcall): Add add_setshow_boolean_cmd for
928 unwind-on-terminating-exception.
930 2009-06-12 Kevin Buettner <kevinb@redhat.com>
932 * dwarf2read.c (dwarf2_psymtab_to_symtab): Propagate
933 `has_section_at_zero' flag from stripped objfile to separate,
934 debug info only, objfile.
936 2009-06-12 Pedro Alves <pedro@codesourcery.com>
938 * exec.h (section_table_xfer_memory_partial): Improve description,
939 mention SECTION_NAME.
940 * exec.c (section_table_xfer_memory_partial): Remove stale
943 2009-06-11 Aleksandar Ristovski <aristovski@qnx.com>
945 * nto-tdep.h (nto_generic_supply_gpregset)
946 (nto_generic_supply_fpregset, nto_generic_supply_altregset): Remove.
947 * nto-tdep.c (nto_generic_supply_gpregset)
948 (nto_generic_supply_fpregset, nto_generic_supply_altregset): Remove.
950 2009-06-11 Aleksandar Ristovski <aristovski@qnx.com>
952 * i386-nto-tdep.c (I386_NTO_SIGCONTEXT_OFFSET): Remove define.
953 (i386nto_sigcontext_addr): Change the way context address is calculated.
954 (i386nto_init_abi): Remove usage of deprecated sc_reg_offset and
955 sc_sp_offset and set sc_reg_offset and sc_num_regs.
957 2009-06-11 Aleksandar Ristovski <aristovski@qnx.com>
959 * i386-nto-tdep.c (i386_nto_target): Remove definition.
960 (init_i386nto_ops): Use macros to set fields to global
961 current_nto_target directly.
962 (i386nto_init_abi): Remove unused nto_set_target call.
963 * nto-tdep.h (nto_set_target): Remove unused declaration.
964 * nto-tdep.c (nto_set_target): Remove unused function.
966 2009-06-11 Pedro Alves <pedro@codesourcery.com>
968 * breakpoint.c (break_command_really): Rename local variable
969 breakpoint_chain to bkpt_chain.
971 2009-06-11 Aleksandar Ristovski <aristovski@qnx.com>
973 Add support for XMM registers.
974 * i386-nto-tdep.c (i386nto_regset_id): Add case for SSE register set.
975 (i386nto_register_area): Correctly calculate offsets and sizes for
976 all supported registers.
978 2009-06-11 Tom Tromey <tromey@redhat.com>
980 * eval.c (evaluate_subexp_standard) <OP_OBJC_MSGCALL>: Remove
981 'static' from local variable definitions.
983 2009-06-11 Pedro Alves <pedro@codesourcery.com>
985 * symtab.c (append_expanded_sal): Remove unused local variables.
987 2009-06-11 Pedro Alves <pedro@codesourcery.com>
989 * infrun.c (sched_multi): New global.
990 (resume): If sched_multi is set, resume only threads of the
992 (prepare_to_proceed): Don't switch over to wait_ptid if we're
993 resuming a different inferior, and sched_multi is off.
994 (show_schedule_multiple): New.
995 (_initialize_infrun): Register new "set schedule-multiple" command.
996 * inferior.h (sched_multi): Declare.
997 * NEWS: Mention new "schedule-multiple" setting.
999 2009-06-11 Pedro Alves <pedro@codesourcery.com>
1001 * varobj.c (varobj_create): Properly restore the selected frame.
1003 2009-06-05 Tom Tromey <tromey@redhat.com>
1005 * inferior.c (print_inferior): Make a table, not a list. Emit
1008 2009-06-10 Jonas Maebe <jonas.maebe@elis.ugent.be>
1010 * darwin-nat.c (darwin_stop_inferior): Pass 0 as options to
1011 darwin_wait (blocking wait).
1012 (darwin_kill_inferior): Likewise.
1014 2009-06-10 Pedro Alves <pedro@codesourcery.com>
1016 * infrun.c (handle_inferior_event): Update comment around trying
1017 to revert back to a stepping thread that has exited.
1019 2009-06-10 Cary Coutant <ccoutant@google.com>
1021 * dwarf2read.c (dwarf_decode_lines): Recognize and ignore
1022 DW_LNE_set_discriminator.
1024 2009-06-10 Pierre Muller <muller@ics.u-strasbg.fr>
1026 * breakpoint.c: ARI fixes.
1027 (create_overlay_event_breakpoint): Avoid assignment inside if statement.
1028 (print_one_breakpoint_location): Likewise.
1029 (create_longjmp_breakpoint): Likewise.
1030 (tracepoint_save_command): Likewise
1031 (bpstat_find_step_resume_breakpoint): No operator at end of line.
1032 (bpstat_stop_status): Likewise.
1033 (describe_other_breakpoints): Likewise.
1034 (hw_watchpoint_used_count): Likewise.
1035 (expand_line_sal_maybe): Likewise.
1036 (break_command_really): Likewise.
1037 (delete_command): Likewise.
1038 (do_enable_breakpoint): Likewise.
1039 (delete_trace_command): Likewise.
1040 (catch_exception_command_1): Likewise and remove extra parentheses.
1042 2009-06-08 Pierre Muller <muller@ics.u-strasbg.fr>
1044 * breakpoint.c (_initialize_breakpoint): Remove "bu" command alias of
1045 "ubreak" command that does not exist.
1047 2009-06-08 Pierre Muller <muller@ics.u-strasbg.fr>
1049 * cli/cli-decode.c (add_alias_cmd): Correct assertion.
1051 2009-06-07 Pedro Alves <pedro@codesourcery.com>
1053 * hppa-tdep.c (_initialize_hppa_tdep): Add declaration.
1055 2009-06-07 Pedro Alves <pedro@codesourcery.com>
1058 * proc-utils.h (procfs_first_available): Don't declare here.
1059 * sol-thread.c: Include procfs.h instead of sys/procfs.h and
1061 * procfs.c: Include procfs.h.
1062 (procfs_target): Make it public. Don't register
1063 procfs_can_use_hw_breakpoint here.
1064 (proc_set_watchpoint): Check for PCWATCH or PIOCSWATCH being
1065 defined instead of TARGET_HAS_HARDWARE_WATCHPOINTS.
1066 (procfs_can_use_hw_breakpoint): Remove check of
1067 TARGET_HAS_HARDWARE_WATCHPOINTS.
1068 (procfs_use_watchpoints): Register procfs_can_use_hw_breakpoint
1070 (_initialize_procfs): Don't add the procfs target here.
1072 * i386-sol2-nat.c: Include target.h and procfs.h.
1073 (_initialize_amd64_sol2_nat): Install the procfs target here,
1074 customized with watchpoints support.
1075 * irix5-nat.c: Include target.h.
1076 (_initialize_core_irix5): Rename to ...
1077 (_initialize_irix5_nat): ... this. Install the procfs target
1078 here, customized with watchpoints support.
1079 * alpha-nat.c: Include procfs.h.
1080 (_initialize_core_alpha): Rename to...
1081 (_initialize_alpha_nat): ... this. Install the procfs target
1082 here, customized with watchpoints support.
1083 * sparc-sol2-nat.c: Include target.h and procfs.h.
1084 (_initialize_sparc_sol2_nat): New.
1086 * config/i386/nm-i386sol2.h (TARGET_HAS_HARDWARE_WATCHPOINTS): Delete.
1087 * config/sparc/nm-sol2.h (TARGET_HAS_HARDWARE_WATCHPOINTS): Delete.
1088 * config/mips/irix5.mh (NAT_FILE): Delete.
1089 * config/mips/irix6.mh (NAT_FILE): Delete.
1090 * config/mips/nm-irix5.h: Delete.
1092 20009-06-07 Pedro Alves <pedro@codesourcery.com>
1094 * auxv.c (procfs_xfer_auxv): Change type of the `object' argument
1095 to enum target_object. Cleanup comments.
1096 * auxv.h: Include "target.h". Cleanup comments to not mention
1097 NATIVE_XFER_AUXV anymore.
1099 2009-06-07 Pedro Alves <pedro@codesourcery.com>
1101 * inferior.h (procfs_first_available): Move declaration to...
1102 * proc-utils.h: ... here.
1103 * sol-thread.c: Include procfs.h and proc-utils.h.
1105 2009-06-07 Pedro Alves <pedro@codesourcery.com>
1107 * inferior.h (proc_iterate_over_mappings): Delete declaration.
1108 * nto-tdep.h (proc_iterate_over_mappings): Delete declaration.
1109 * procfs.c (proc_iterate_over_mappings): Delete.
1111 2009-06-07 Pedro Alves <pedro@codesourcery.com>
1113 * target.h (struct target_ops): Make to_has_all_memory,
1114 to_has_memory, to_has_stack, to_has_registers and to_has_execution
1115 methods instead of variables.
1116 (target_has_all_memory_1, target_has_memory_1, target_has_stack_1)
1117 (target_has_registers_1, target_has_execution_1): Declare
1119 (target_has_all_memory): Rewrite to call target_has_all_memory_1.
1120 (target_has_memory): Rewrite to call target_has_memory_1.
1121 (target_has_stack): Rewrite to call target_has_all_stack_1.
1122 (target_has_registers): Rewrite to call target_has_registers_1.
1123 (target_has_execution): Rewrite to call target_has_execution_1.
1124 (default_child_has_all_memory, default_child_has_memory)
1125 (default_child_has_stack, default_child_has_registers)
1126 (default_child_has_execution): Declare.
1127 (target_mark_running, target_mark_exited): Delete declarations.
1128 * target.c (default_child_has_all_memory,
1129 default_child_has_memory, default_child_has_stack,
1130 default_child_has_registers, default_child_has_execution): New.
1131 (target_has_all_memory_1, target_has_memory_1, target_has_stack_1,
1132 target_has_registers_1, target_has_execution_1): New.
1133 (add_target): Default the to_has_all_memory, to_has_all_memory,
1134 to_has_memory, to_has_stack, to_has_registers and to_has_execution
1135 callbacks to return 0.
1136 (update_current_target): Do not inherit to_has_all_memory,
1137 to_has_memory, to_has_stack, to_has_registers or to_has_execution.
1138 (target_mark_running, target_mark_exited): Delete.
1139 (memory_xfer_partial): Adjust.
1140 (target_read_memory, target_write_memory, target_search_memory):
1141 Dispatch to the the top-most target, not the flattened
1143 (target_info): Adjust.
1144 (init_dummy_target): Install return_zero as callback for
1145 to_has_all_memory, to_has_memory, to_has_stack, to_has_registers,
1147 (set_maintenance_target_async_permitted): Use have_live_inferiors
1148 instead of target_has_execution.
1149 * target-memory.c (target_write_memory_blocks): Dispatch memory
1150 writes to the the top-most target, not the flattened
1153 * breakpoint.c (insert_breakpoints): Don't check for
1154 target_has_execution here.
1155 (update_global_location_list): Check if there are live inferiors
1156 to debug instead of target_has_execution.
1157 * infcmd.c (kill_command, detach_command): Check if there are
1158 inferiors instead of target_has_execution.
1159 * inferior.h (have_live_inferiors): Declare.
1160 * inferior.c (have_live_inferiors): New.
1161 * infrun.c (normal_stop): Don't check for target_has_execution to
1162 finish the thread states.
1163 * thread.c (is_thread_state, is_stopped, is_exited, is_running)
1164 (any_running, is_executing): Remove checks for
1165 target_has_execution.
1166 * top.c (kill_or_detach): Don't try to kill core inferiors.
1167 (quit_target): Don't check for target_has_execution.
1169 * corelow.c (core_has_memory, core_has_stack, core_has_registers):
1171 (init_core_ops): Install core_has_memory, core_has_stack and
1173 * exec.c (exec_has_memory): New.
1174 (init_exec_ops): Install exec_has_memory.
1175 * remote.c (remote_add_inferior): Don't call target_mark_running.
1176 (remote_start_remote): Don't call target_mark_exited or call
1177 target_mark_running.
1178 (remote_open_1): Use have_inferiors instead of
1179 target_has_execution. Don't use target_mark_exited.
1180 (init_remote_ops): Install deafult_child_has_all_memory,
1181 default_child_has_memory, default_child_has_stack,
1182 default_child_has_registers, default_child_has_execution.
1183 * bsd-kvm.c (bsd_kvm_return_one): New.
1184 (bsd_kvm_add_target): Register bsd_kvm_return_one as
1185 to_has_memory, to_has_stack and to_has_registers callbacks.
1186 * remote-m32r-sdi.c (m32r_return_one): New.
1187 (init_m32r_ops): Register it.
1188 * inf-child.c (inf_child_target): Adjust to register
1189 default_child_has_all_memory, default_child_has_memory,
1190 default_child_has_stack, default_child_has_registers,
1191 default_child_has_execution callbacks.
1192 * gnu-nat.c (init_gnu_ops): Likewise.
1193 * go32-nat.c (init_go32_ops): Likewise.
1194 * hpux-thread.c (init_hpux_thread_ops): Likewise.
1195 * monitor.c (init_base_monitor_ops): Likewise.
1196 * nto-procfs.c (init_procfs_ops): Likewise.
1197 * remote-mips.c (_initialize_remote_mips): Likewise.
1198 * windows-nat.c (init_windows_ops): Likewise.
1199 * remote-sim.c (gdbsim_create_inferior): Don't use
1200 target_mark_running or target_mark_exited.
1201 (gdbsim_mourn_inferior): Don't call target_mark_exited.
1202 (init_gdbsim_ops): Adjust to register
1203 default_child_has_all_memory, default_child_has_memory,
1204 default_child_has_stack, default_child_has_registers,
1205 default_child_has_execution callbacks.
1207 * linux-nat.c (linux_nat_xfer_partial): If reading memory, and
1208 there's no inferior selected, defer to a lower stratum.
1210 2009-06-05 Tom Tromey <tromey@redhat.com>
1212 * varobj.c (update_dynamic_varobj_children): Wrap error text in
1214 (install_visualizer): Likewise.
1215 (varobj_set_visualizer): Likewise.
1217 2009-06-05 Marc Khouzam <marc.khouzam@ericsson.com>
1219 * mi/mi-main.c (mi_cmd_exec_continue)
1220 (mi_cmd_exec_interrupt): Adjust parsing of thread group
1221 ids to current reality, where they don't have any 'p' prefix.
1223 2009-06-05 Aleksandar Ristovski <aristovski@qnx.com>
1225 * corelow.c (core_open): Check for core_gdbarch before calling
1226 gdbarch_target_signal_from_host.
1228 2009-06-05 Tom Tromey <tromey@redhat.com>
1230 * c-exp.y (parse_number): Don't use K&R definition.
1232 (yyerror): Likewise.
1234 2009-06-04 Jan Kratochvil <jan.kratochvil@redhat.com>
1236 * varobj.c (varobj_update): Fix out of scope varobjs to not to change.
1238 2009-06-04 Ulrich Weigand <uweigand@de.ibm.com>
1240 * symtab.h: Rename SYMBOL_OPS to SYMBOL_COMPUTED_OPS.
1241 * ax-gdb.c (gen_var_ref): Likewise.
1242 * findvar.c (read_var_value, symbol_read_needs_frame): Likewise.
1243 * printcmd.c (address_info): Likewise.
1244 * dwarf2loc.c (dwarf_expr_frame_base): Likewise.
1245 * dwarf2read.c (dwarf2_symbol_mark_computed): Likewise.
1246 * symtab.h: Rename struct symbol_ops to struct symbol_computed_ops.
1247 * dwarf2loc.h: Likewise.
1248 * dwarf2loc.c (dwarf2_locexpr_funcs, dwarf2_loclist_funcs): Likewise.
1250 * symtab.h: (struct symbol_register_ops): New struct definition.
1251 (struct symbol): Make "ops" member a union of symbol_computed_ops and
1252 symbol_register_ops callback pointers.
1253 (SYMBOL_REGISTER_OPS): New macro.
1254 * tracepoint.c: Include "objfiles.h".
1255 (scope_info, collect_symbol): Use SYMBOL_REGISTER_OPS register_number
1256 callback to retrieve register numbers.
1257 * ax-gdb.c (gen_var_ref): Likewise.
1258 * findvar.c (read_var_value): Likewise.
1259 * printcmd.c (address_info): Likewise.
1261 * coffread.c (coff_reg_to_regnum): New function.
1262 (coff_register_funcs): New static variable.
1263 (process_coff_symbol): Do not call gdbarch_sdb_reg_to_regnum.
1264 Install SYMBOL_REGISTER_OPS callbacks.
1265 * mdebugread.c (mdebug_reg_to_regnum): New function.
1266 (mdebug_register_funcs): New static variable.
1267 (parse_symbol): Do not call gdbarch_ecoff_reg_to_regnum.
1268 Install SYMBOL_REGISTER_OPS callbacks.
1269 * stabsread.c (stab_reg_to_regnum): New function.
1270 (stab_register_funcs): New static variable.
1271 (define_symbol): Do not call gdbarch_stab_reg_to_regnum.
1272 Install SYMBOL_REGISTER_OPS callbacks.
1274 2009-06-03 Doug Evans <dje@google.com>
1276 * symfile.c (reread_symbols): Reset psymtabs_addrmap to NULL
1277 after discarding its contents.
1279 2009-06-03 Pedro Alves <pedro@codesourcery.com>
1281 * target.c: Include "exec.h".
1282 (update_current_target): Don't inherit to_sections or
1284 (target_get_section_table): New.
1285 (target_section_by_addr): Fetch the section table from the passed
1287 (memory_xfer_partial): Handle unmapped overlay sections before
1288 anything else. Get the overlay mapped address here. Adjust to
1289 use section_table_xfer_memory_partial.
1290 (get_target_memory): Request a TARGET_OBJECT_RAW_MEMORY object
1291 instead of TARGET_OBJECT_MEMORY.
1292 (target_resize_to_sections): Delete.
1293 (remove_target_sections): Adjust to remove target sections from
1294 `current_target_sections', and use resize_section_table.
1295 * target.h (struct target_ops) <to_sections, to_sections_end>:
1297 <to_get_section_table>: New method.
1298 (xfer_memory, print_section_info): Delete declarations.
1299 (struct target_section_table): New type.
1300 (target_get_section_table): Declare.
1301 (target_resize_to_sections): Delete declaration.
1302 (remove_target_sections): Delete declaration.
1303 * bfd-target.c (target_bfd_xfer_partial): Get the section table
1305 (target_bfd_get_section_table): New.
1306 (target_bfd_xclose): Adjust.
1307 (target_bfd_reopen): Store the section table in the to_data field.
1308 * corelow.c (core_data): New.
1309 (core_close): Adjust to release core_data and its sections.
1310 (core_open): Allocate core_data, and build its target sections
1312 (deprecated_core_resize_section_table): New.
1313 (core_files_info): Pass core_data to print_section_info.
1314 (core_xfer_partial): Adjust to use
1315 section_table_xfer_memory_partial for TARGET_OBJECT_MEMORY xfers.
1316 (init_core_ops): Do not install a deprecated_xfer_memory callback
1318 * solib.c (update_solib_list): Add the shared library sections
1319 to the current target sections table.
1320 * exec.c (current_target_sections_1): New global.
1321 (current_target_sections): New global.
1322 (exec_close_1): New function, refactored from exec_close. Remove
1323 the exec_bfd's sections from the current target sections table.
1324 Adjust to not use to_sections.
1325 (exec_close): Remove all target sections. Call exec_close_1.
1326 (exec_file_clear): Use exec_close_1 instead of unpushing the
1328 (exec_file_attach): Likewise. Adjust to not use to_sections. Add
1329 exec_bfd's sections to the current target sections table. Don't
1330 push the exec_ops target here.
1331 (resize_section_table): New.
1332 (add_target_sections): New.
1333 (remove_target_sections): Moved here.
1334 (section_table_xfer_memory): Adjust to implement the xfer_partial
1335 interface, and rename to...
1336 (section_table_xfer_memory_partial): ... this, replacing the
1337 current function of that same name.
1338 (exec_get_section_table): New.
1339 (exec_xfer_partial): New.
1340 (xfer_memory): Delete.
1341 (print_section_info): Replace the target_ops parameter by a
1342 target_section_table parameter.
1343 (exec_files_info, set_section_command, exec_set_section_address):
1344 Adjust to use the current sections table.
1345 (init_exec_ops): Do not register a deprecated_xfer_memory
1346 callback. Register to_xfer_partial and to_get_section_table
1348 * infrun.c (handle_inferior_event): Update comments around
1350 * rs6000-nat.c (xcoff_relocate_core): Adjust to use
1351 deprecated_core_resize_section_table.
1352 * exec.h (resize_section_table): Declare.
1353 (section_table_xfer_memory_partial): Add const char * argument.
1354 (remove_target_sections): Declare here.
1355 (add_target_sections): Declare.
1356 (print_section_info): Declare here.
1357 * gdbcore.h (deprecated_core_resize_section_table): Declare.
1359 2009-06-03 Ulrich Weigand <uweigand@de.ibm.com>
1361 * value.h (struct internalvar): Remove.
1362 (get_internalvar_integer): Add prototype.
1363 (set_internalvar_integer): Add prototype.
1364 (clear_internalvar): Add prototype.
1366 * value.c (struct internalvar): Move here. Add type member. Remove
1367 endian member. Add union_internalvar member instead of value member.
1368 (init_if_undefined_command): Use intvar->type.
1369 (create_internalvar): Do not initialize value/endian, but type.
1370 (create_internalvar_type_lazy): Call create_internalvar.
1371 (value_of_internalvar): Handle host-side internalvar contents.
1372 (set_internalvar_component): Likewise.
1373 (set_internalvar): Likewise.
1374 (get_internalvar_integer): New function.
1375 (clear_internalvar): Likewise.
1376 (set_internalvar_integer): Likewise.
1377 (preserve_values): Handle host-side internalvar contents.
1379 * breakpoint.c (set_breakpoint_count, set_tracepoint_count): Call
1380 set_internalvar_integer instead of set_internalvar.
1381 * findcmd.c (find_command): Likewise.
1382 * infrun.c (handle_inferior_event): Likewise.
1383 * source.c (forward_search_command, reverse_search_command): Likewise.
1384 * tracepoint.c (set_traceframe_num, set_tracepoint_num,
1385 set_traceframe_context): Likewise.
1387 * printcmd.c (x_command): Call clear_internalvar instead of
1389 * tracepoint.c (set_traceframe_context): Likewise.
1391 * breakpoint.c (get_number_trailer): Call get_internalvar_integer
1392 instead of value_of_internalvar.
1393 * linespec.c (decode_dollar): Likewise.
1395 * expprint.c (dump_subexp_body_standard): Use internalvar_name
1396 instead of accessing internalvar private elements.
1397 * valops.c (value_assign): Copy from original source instead of
1398 accessing internalvar private elements.
1400 2009-06-03 Ulrich Weigand <uweigand@de.ibm.com>
1402 * scm-lang.c (builtin_type_scm): Remove.
1403 (scm_lookup_name): Add GDBARCH parameter. Use it instead of
1404 objfile architecture. Use per-architecture builtin_scm_type instead
1405 of builtin_type_scm.
1406 (evaluate_exp): Pass expression architecture to scm_lookup_name.
1408 (scm_get_field): Add SIZE parameter. Use it instead of
1409 TYPE_LENGTH (builtin_type_scm).
1411 (build_scm_types): New function.
1412 (scm_type_data): New variable.
1413 (builtin_scm_type): New function.
1414 (_initialize_scheme_language): Do not initialize builtin_type_scm.
1415 Register build_scm_types as post-init function for scm_type_data.
1417 * scm-exp.c (scm_lreadr): Use per-architecture builtin_scm_type
1418 instead of builtin_type_scm.
1420 * scm-lang.h (SCM_CAR, SCM_CDR): Pass SCM_SIZE to scm_get_field.
1421 (scm_get_field): Add SIZE paramter.
1422 (scm_scmval_print): Remove prototype.
1423 (builtin_type_scm): Remove.
1424 (struct builtin_scm_type): Add structure definition.
1425 (builtin_scm_type): Add prototype.
1427 * scm-valprint.c (scm_inferior_print): Add TYPE parameter. Use it
1428 instead of builtin_core_addr type; do not use objfile architecture.
1429 (scm_scmlist_print): Add TYPE parameter. Use it to define SCM_SIZE.
1430 Pass type to scm_scmval_print.
1431 (scm_ipruk): Add TYPE parameter. Use it to define SCM_SIZE.
1432 (scm_scmval_print): Make static. Add TYPE parameter. Use it to
1433 define SCM_SIZE. Pass type to scm_ipruk and scm_scmlist_print.
1434 (scm_val_print): Pass type to scm_inferior_print and scm_scmval_print.
1436 2009-06-03 Ulrich Weigand <uweigand@de.ibm.com>
1438 * mdebugread.c (mdebug_type_void, mdebug_type_char, mdebug_type_short,
1439 mdebug_type_int, mdebug_type_int_32, mdebug_type_int_64,
1440 mdebug_type_long_32, mdebug_type_long_64, mdebug_type_long_long_64,
1441 mdebug_type_unsigned_char, mdebug_type_unsigned_short,
1442 mdebug_type_unsigned_int_32, mdebug_type_unsigned_int_64,
1443 mdebug_type_unsigned_long_32, mdebug_type_unsigned_long_64,
1444 mdebug_type_unsigned_long_long_64, mdebug_type_adr_32,
1445 mdebug_type_adr_64, mdebug_type_float, mdebug_type_double,
1446 mdebug_type_complex, mdebug_type_double_complex,
1447 mdebug_type_fixed_dec, mdebug_type_float_dec, mdebug_type_string):
1450 (basic_type_data): New global variable.
1451 (basic_type): New function.
1452 (parse_type): Remove static basic type map map_bt. Call basic_type
1453 to get basic types instead of using mdebug_type_ variables.
1455 (parse_symbol): Use builtin types instead of mdebug_type_ variables.
1456 (upgrade_type): Likewise.
1457 (parse_procedure): Likewise.
1458 (psymtab_to_symtab_1): Likewise.
1460 (_initialize_mdebugread): Do not initialize mdebug_type_ variables.
1461 Initialize basic_type_data.
1463 2009-06-03 Ulrich Weigand <uweigand@de.ibm.com>
1465 * dfp.h (decimal_binop): Convert LEN_RESULT to input parameter.
1466 * dfp.c (promote_decimal): Remove.
1467 (decimal_binop): Convert LEN_RESULT to input parameter.
1468 Remove call to decimal_binop.
1469 (decimal_compare): Remove call to decimal_binop.
1471 * valarith.c (value_binop): Pass desired result type length
1474 2009-06-01 Tristan Gingold <gingold@adacore.com>
1476 * configure.tgt (avr): Set gdb_sim to use the simulator.
1478 2009-05-29 Doug Evans <dje@google.com>
1480 * infrun.c (prepare_to_proceed): Document. Assert !non_stop.
1481 If scheduler-locking is enabled, we're not going to be singlestepping
1482 any other previously stopped thread.
1484 2009-05-29 Pedro Alves <pedro@codesourcery.com>
1486 * mi/mi-interp.c (mi_on_resume): Initialize `count' to 0.
1488 2009-05-29 Eli Zaretskii <eliz@gnu.org>
1490 * i386-tdep.c (i386_go32_init_abi): Use SVR4 register numbering
1491 for stabs and COFF debug info.
1493 2009-05-28 Pedro Alves <pedro@codesourcery.com>
1495 * infrun.c (handle_inferior_event): When thread hoping, switch
1496 inferior_ptid to the event thread before removing breakpoints from
1497 the target. If not stopping, also try to revert back to a thread
1498 that was doing a "next". Check if that thread still exists before
1500 (currently_stepping_thread): Delete and merge with ...
1501 (currently_stepping): ... this.
1502 (currently_stepping_callback): Rename to ...
1503 (currently_stepping_or_nexting_callback): ... this, and also
1504 return true if the thread was stepping over a call (has a
1505 step-resume breakpoint).
1507 2009-05-28 Tom Tromey <tromey@redhat.com>
1509 * python/python.c (gdbpy_parameter): Rename. Fix error message.
1510 (GdbMethods): Change "get_parameter" to "parameter".
1512 2009-05-28 Pierre Muller <muller@ics.u-strasbg.fr>
1513 Paul Pluzhnikov <ppluzhnikov@google.com>
1515 * configure.ac (!have_libpython): Add python-prettyprint source
1517 * configure: Regenerate.
1518 * python/python-prettyprint.c: Move "#ifdef HAVE_PYTHON" before
1521 2009-05-27 Vladimir Prus <vladimir@codesourcery.com>
1522 Tom Tromey <tromey@redhat.com>
1523 Thiago Jung Bauermann <bauerman@br.ibm.com>
1525 * mi/mi-main.c (mi_cmd_list_features): List "python" feature.
1526 * varobj.h (varobj_set_visualizer): Declare.
1527 (varobj_get_display_hint): Likewise.
1528 (varobj_update_result_t) <children_changed, value_installed>: New
1530 * mi/mi-cmds.c (mi_cmds): Add var-set-visualizer.
1531 * mi/mi-cmds.h (mi_cmd_var_set_visualizer,
1532 mi_cmd_var_set_child_range): Declare.
1533 * mi/mi-cmd-var.c (mi_cmd_var_set_visualizer): New function.
1534 (mi_cmd_var_list_children): Emit display hint.
1535 (varobj_update_one): Emit display hint. Handle dynamic children.
1536 * python/python.c (GdbMethods): Add "default_visualizer".
1537 * python/python-internal.h (apply_varobj_pretty_printer,
1538 gdbpy_get_varobj_pretty_printer, gdbpy_get_display_hint):
1540 (gdbpy_default_visualizer): Likewise.
1541 * varobj.c: Include python.h, python-internal.h.
1542 (PyObject): New typedef.
1543 (struct varobj) <children_requested, pretty_printer>: New fields.
1544 (varobj_create): Call install_default_visualizer.
1545 (instantiate_pretty_printer): New function.
1546 (varobj_set_display_format): Update.
1547 (varobj_get_display_hint): New function.
1548 (update_dynamic_varobj_children): New function.
1549 (varobj_get_num_children): Handle dynamic children.
1550 (varobj_list_children): Likewise.
1551 (install_new_value): Likewise.
1552 (varobj_add_child): New function.
1553 (install_visualizer): Likewise.
1554 (install_default_visualizer): Likewise.
1555 (varobj_set_visualizer): Likewise.
1556 (varobj_update): Handle dynamic children.
1557 (create_child): Use create_child_with_value.
1558 (create_child_with_value): New function.
1559 (value_get_print_value): Call pretty printer. Add value_formatter
1561 (c_value_of_variable): Update.
1562 (varobj_invalidate): Always free all_rootvarobj.
1563 * python/python-prettyprint.c (apply_varobj_pretty_printer): New
1565 (gdbpy_get_varobj_pretty_printer): Likewise.
1566 (gdbpy_default_visualizer): Likewise.
1568 2009-05-27 Tom Tromey <tromey@redhat.com>
1569 Thiago Jung Bauermann <bauerman@br.ibm.com>
1570 Phil Muldoon <pmuldoon@redhat.com>
1571 Paul Pluzhnikov <ppluzhnikov@google.com>
1572 Vladimir Prus <vladimir@codesourcery.com>
1574 * python/python-value.c (value_object_to_value): New function.
1575 * python/python-internal.h: Include frameobject.h.
1576 (gdbpy_children_cst, gdbpy_to_string_cst, gdbpy_display_hint_cst):
1578 (value_object_to_value): Declare.
1579 * printcmd.c (struct format_data) <raw>: New field.
1580 (last_format): Default to 0.
1581 (decode_format): Initialize val.raw. Handle /r flag.
1582 (print_command_1): Initialize fmt.raw and opts.raw.
1583 (output_command): Likewise.
1584 (x_command): Fix initialization of fmt.format. Initialize
1586 (display_command): Initialize fmt.raw.
1587 (do_one_display): Set opts.raw.
1588 * python/python.c (gdbpy_to_string_cst, gdbpy_children_cst,
1589 gdbpy_display_hint_cst): New globals.
1590 (_initialize_python): Initialize them. Set gdb.pretty_printers.
1591 * cp-valprint.c: Include python.h.
1592 (cp_print_value): Call apply_val_pretty_printer.
1593 * python/python.h (apply_val_pretty_printer): Declare.
1594 * stack.c (print_this_frame_argument_p): Remove.
1595 (print_frame_args): Compute summary flag. Don't use
1596 print_this_frame_argument_p.
1597 * valprint.c: Include python.h.
1598 (user_print_options): Initialize new fields.
1599 (scalar_type_p): New function.
1600 (val_print): Handle 'raw' and 'summary' modes. Call
1601 apply_val_pretty_printer.
1602 (value_print): Handle 'raw' mode.
1603 * valprint.h (struct value_print_options) <raw, summary>: New
1605 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-prettyprint.o
1606 (SUBDIR_PYTHON_SRCS): Add python-prettyprint.c.
1607 (python-prettyprint.o): New target.
1608 * python/python-prettyprint.c: New file.
1610 2009-05-27 Tom Tromey <tromey@redhat.com>
1611 Paul Pluzhnikov <ppluzhnikov@google.com>
1613 * mi/mi-main.c (mi_cmd_data_evaluate_expression): Use
1615 * cli/cli-dump.c (dump_value_to_file): Use value_address.
1616 * valprint.c (common_val_print): Likewise.
1617 * v850-tdep.c (v850_push_dummy_call): Use value_address.
1618 * tracepoint.c (encode_actions): Use value_address.
1619 * printcmd.c (print_formatted): Use value_address.
1620 (x_command): Likewise.
1621 * p-valprint.c (pascal_object_print_static_field): Use
1623 * mn10300-tdep.c (mn10300_push_dummy_call): Use value_address.
1624 * mips-tdep.c (mips_eabi_push_dummy_call): Use value_address.
1625 * m32r-tdep.c (m32r_push_dummy_call): Use value_address.
1626 * jv-valprint.c (java_value_print): Use value_address.
1627 * infcall.c (find_function_addr): Use value_address.
1628 * gnu-v3-abi.c (gnuv3_rtti_type): Use value_address.
1629 * gnu-v2-abi.c (gnuv2_value_rtti_type): Use value_address.
1630 * frv-tdep.c (frv_push_dummy_call): Use value_address.
1631 * frame.c (frame_register_unwind): Use value_address.
1632 (frame_unwind_register_value): Likewise.
1633 * darwin-nat-info.c (info_mach_region_command): Use
1635 * cp-valprint.c (cp_print_static_field): Use value_address.
1636 * c-valprint.c (c_value_print): Use value_address.
1637 * breakpoint.c (update_watchpoint): Use value_address.
1638 (can_use_hardware_watchpoint): Likewise.
1639 * ada-valprint.c (ada_val_print_1): Use value_address.
1640 (ada_value_print): Likewise.
1641 * ada-tasks.c (read_fat_string_value): Use value_address.
1642 * jv-lang.c (java_link_class_type): Use set_value_address.
1643 (java_link_class_type): Likewise.
1644 (get_java_utf8_name): Use value_address.
1645 (type_from_class): Likewise.
1646 (java_link_class_type): Likewise.
1647 * findvar.c (value_of_register): Use set_value_address.
1648 (read_var_value): Likewise.
1649 (read_var_value): Likewise.
1650 * eval.c (evaluate_subexp_standard): Use set_value_address.
1651 (evaluate_subexp_standard): Use value_address.
1652 * dwarf2loc.c (dwarf2_evaluate_loc_desc): Use set_value_address.
1653 * ada-lang.c (coerce_unspec_val_to_type): Use set_value_address.
1654 (ada_value_primitive_packed_val): Likewise.
1655 (ensure_lval): Likewise.
1656 (thin_data_pntr): Use value_address.
1657 (desc_bounds): Likewise.
1658 (ada_value_primitive_packed_val): Likewise.
1659 (value_assign_to_component): Likewise.
1660 (ensure_lval): Likewise.
1661 (make_array_descriptor): Likewise.
1662 (ada_to_fixed_value): Likewise.
1663 (unwrap_value): Likewise.
1664 * value.c (deprecated_value_address_hack): Remove.
1665 (value_address): New function.
1666 (value_raw_address): Likewise.
1667 (set_value_address): Likewise.
1668 (value_fn_field): Use set_value_address.
1669 (value_from_contents_and_address): Likewise.
1670 (value_fn_field): Likewise.
1671 (allocate_value_lazy): Don't use VALUE_ADDRESS.
1672 (value_as_address): Use value_address.
1673 (value_static_field): Likewise.
1674 * valops.c (search_struct_field): Use set_value_address.
1675 (value_at): Likewise.
1676 (value_at_lazy): Likewise.
1677 (value_repeat): Likewise.
1678 (value_cast_structs): Use value_address.
1679 (value_cast): Likewise.
1680 (value_fetch_lazy): Likewise.
1681 (value_assign): Likewise.
1682 (value_repeat): Likewise.
1683 (address_of_variable): Likewise.
1684 (value_coerce_array): Likewise.
1685 (value_coerce_function): Likewise.
1686 (value_addr): Likewise.
1687 (search_struct_field): Likewise.
1688 (search_struct_method): Likewise.
1689 (find_method_list): Likewise.
1690 (value_struct_elt_for_reference): Likewise.
1691 (value_full_object): Likewise.
1692 * jv-valprint.c (java_value_print): Use set_value_address.
1693 * value.h (deprecated_value_address_hack): Remove.
1694 (VALUE_ADDRESS): Remove.
1695 (value_address): Declare.
1696 (value_raw_address): Declare.
1697 (set_value_address): Declare.
1699 2009-05-27 Tom Tromey <tromey@redhat.com>
1700 Thiago Jung Bauermann <bauerman@br.ibm.com>
1701 Phil Muldoon <pmuldoon@redhat.com>
1702 Paul Pluzhnikov <ppluzhnikov@google.com>
1704 * python/python.c (_initialize_python): Call
1705 gdbpy_initialize_types.
1706 (GdbMethods): Add "lookup_type".
1707 * python/python-value.c (value_object) <type>: New field.
1708 (valpy_dealloc): Decref type.
1709 (valpy_new): Initialize type.
1710 (valpy_get_type): New function.
1711 (value_to_value_object): Initialize type.
1712 (valpy_cast): New function.
1713 (value_object_getset): Add "type".
1714 (value_object_methods): Add "cast".
1715 * python/python-internal.h (type_to_type_object): Declare.
1716 (type_object_to_type): Likewise.
1717 (gdbpy_initialize_types): Likewise.
1718 (gdbpy_lookup_type): Declare.
1719 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-type.o.
1720 (SUBDIR_PYTHON_SRCS): Add python-type.c.
1721 (python-type.o): New target.
1722 * python/python-type.c: New file.
1724 2009-05-27 Tom Tromey <tromey@redhat.com>
1725 Thiago Jung Bauermann <bauerman@br.ibm.com>
1726 Phil Muldoon <pmuldoon@redhat.com>
1728 * python/python.c: Include objfiles.h, observer.h.
1729 (gdbpy_auto_load): New global.
1730 (gdbpy_current_objfile): Likewise.
1731 (GDBPY_AUTO_FILENAME): New define.
1732 (gdbpy_new_objfile): New function.
1733 (gdbpy_get_current_objfile): Likewise.
1734 (gdbpy_objfiles): Likewise.
1735 (_initialize_python): Add "maint set auto-load". Call
1736 gdbpy_initialize_objfile. Attach objfile observer.
1737 (GdbMethods): New methods current_objfile, objfiles.
1738 * python/python-objfile.c: New file.
1739 * python/python-internal.h (objfile_to_objfile_object): Declare.
1740 (objfpy_get_printers): Likewise.
1741 (gdbpy_initialize_objfile): Likewise.
1742 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-objfile.o.
1743 (SUBDIR_PYTHON_SRCS): Add python-objfile.c.
1744 (python-objfile.o): New target.
1746 2009-05-27 Pedro Alves <pedro@codesourcery.com>
1748 * infrun.c (follow_exec): Clear the stop_requested flag.
1749 * linux-nat.c (linux_handle_extended_wait) <PTRACE_EVENT_EXEC>:
1752 2009-05-27 Aleksandar Ristovski <aristovski@qnx.com>
1754 * nto-procfs.c (get_regset): Pass correct pointer.
1756 2009-05-26 Doug Evans <dje@google.com>
1758 * dwarf2read.c (follow_die_ref): Add comment.
1759 (dwarf2_mark_helper): Tweak comment.
1760 (dwarf2_mark): Move description to its proper place.
1762 2009-05-25 Pierre Muller <muller@ics.u-strasbg.fr>
1764 * procfs.c (procfs_wait): Add options parameter.
1766 2009-05-24 Doug Evans <dje@google.com>
1768 Global renaming of find_thread_pid to find_thread_ptid.
1769 * gdbthread.h (find_thread_ptid): Renamed from find_thread_pid.
1770 * thread.c (find_thread_ptid): Renamed from find_thread_pid.
1771 All callers updated.
1773 * infrun.c (follow_fork): Initialize new step_* locals
1774 to avoid "may be used uninitialized" warnings.
1776 2009-05-24 Pedro Alves <pedro@codesourcery.com>
1778 * inflow.c (copy_terminal_info): Deep copy `run_terminal'.
1780 2009-05-24 Pedro Alves <pedro@codesourcery.com>
1782 * gdbthread.h (struct thread_info): New `pending_follow' field.
1783 * thread.c (new_thread): New function.
1784 (add_thread_silent): Use it.
1785 * breakpoint.c (internal_breakpoint_number): New global, moved
1787 (create_internal_breakpoint): ... this.
1788 (clone_momentary_breakpoint): New.
1789 * breakpoint.h (clone_momentary_breakpoint): Declare.
1790 * infrun.c (nullify_last_target_wait_ptid): Move declaration
1792 (pending_follow): Delete.
1793 (follow_fork): Handle pending follow fork event here. Moved the
1794 preserving of thread stepping state here.
1795 (resume): Don't handle pending follow fork events here. Only
1796 install the inferior's terminal modes if we're about to resume it.
1797 (proceed): Handle possible pending follow fork events here.
1798 (init_wait_for_inferior): No need to clear pending_follow anymore,
1800 (handle_inferior_event): Adjust to per-thread `pending_follow'.
1801 Call `follow_fork' to handle following the fork. If the
1802 follow-fork is cancelled, stop stepping.
1803 * linux-nat.c (linux_child_follow_fork): Adjust to per-thread
1804 `pending_follow' events. Remove code that handled preserving the
1805 thread stepping state.
1806 * inf-ptrace.c (inf_ptrace_follow_fork): Ditto.
1807 * inf-ttrace.c (inf_ttrace_follow_fork): Ditto.
1809 2009-05-24 Pierre Muller <muller@ics.u-strasbg.fr>
1811 * symfile.c (add_shared_symbol_files_command): Remove
1812 prototype and function.
1813 (_initialize _symfile): Move "add-shared-symbol-files"
1814 command and "assf" alias.
1815 * windows-nat.c (_initialize_windows_nat): to here.
1816 Change "add-shared-symbol-files" to alias.
1818 * config/i386/cygwin.mh: Remove NAT_FILE.
1819 * config/i386/mingw.mh: Remove NAT_FILE.
1820 * config/i386/mingw64.mh: Remove NAT_FILE.
1821 * config/i386/nm-cygwin.h: Remove file.
1822 * config/i386/nm-cygwin64.h: Remove file.
1824 2009-05-24 Hui Zhu <teawater@gmail.com>
1826 * i386-linux-tdep.c (I386_LINUX_RECORD_SIZE_*,
1827 I386_LINUX_RECORD_IOCTL_*,
1828 I386_LINUX_RECORD_FCNTL_*) Removed.
1829 (i386_linux_init_abi): Change size of record from macros to
1832 2009-05-24 Hui Zhu <teawater@gmail.com>
1834 * i386-linux-tdep.c (i386_linux_init_abi): Remove size_char.
1835 * linux-record.c (record_linux_system_call): Ditto.
1836 * linux-record.h (linux_record_tdep): Ditto.
1838 2009-05-23 Jan Kratochvil <jan.kratochvil@redhat.com>
1840 Replace the savestring calls by xstrdup calls where possible.
1841 * breakpoint.c (condition_command, set_raw_breakpoint)
1842 (create_catchpoint, update_breakpoint_locations): Replace the
1843 savestring calls by xstrdup calls where possible.
1844 * buildsym.c (start_subfile, patch_subfile_names, record_debugformat)
1845 (record_producer): Likewise.
1846 * coffread.c (coff_start_symtab, complete_symtab): Likewise.
1847 * corefile.c (set_gnutarget): Likewise.
1848 * dbxread.c (add_new_header_file): Likewise.
1849 * demangle.c (set_demangling_command, set_demangling_style): Likewise.
1850 * event-top.c (push_prompt, pop_prompt, command_line_handler)
1851 (set_async_prompt): Likewise.
1852 * infcmd.c (set_inferior_io_terminal, attach_command_post_wait):
1854 * language.c (set_language_command, _initialize_language): Likewise.
1855 * linespec.c (decode_line_2): Likewise.
1856 * rs6000-nat.c (add_vmap): Likewise.
1857 * top.c (set_prompt, init_history, init_main): Likewise.
1858 * tracepoint.c (stringify_collection_list): Likewise.
1859 * varobj.c (varobj_create): Remove variable expr_len. Replace the
1860 savestring calls by xstrdup calls where possible.
1861 (value_of_root, c_name_of_variable, c_describe_child): Replace the
1862 savestring calls by xstrdup calls where possible.
1863 * xcoffread.c (complete_symtab): Likewise.
1864 * cli/cli-script.c (build_command_line, define_command): Likewise.
1865 * cli/cli-setshow.c (do_setshow_command): Likewise.
1867 2009-05-23 Jan Kratochvil <jan.kratochvil@redhat.com>
1869 Remove already unreachable code.
1870 * varobj.c (varobj_get_handle): Fix comment when error is called.
1871 All callers updated.
1873 2009-05-23 Eli Zaretskii <eliz@gnu.org>
1875 * README (`configure' options): Document GDB-specific options to
1878 * symtab.c (skip_prologue_using_lineinfo): New function.
1879 (find_function_start_sal): Use it to get to the first line of
1880 function's body that has an entry in the lineinfo table.
1882 * symmisc.c (dump_symtab): Switch the current language to
1883 the language of the symtab we are dumping only if the symtab's
1884 language is neither language_auto nor language_unknown.
1886 * coffread.c (coff_symtab_read): Set language_minimal as the
1887 language for the "_globals_" pseudo-file.
1888 (process_coff_symbol): Set the symbol's language to the language
1891 2009-05-22 Pedro Alves <pedro@codesourcery.com>
1893 * target.h (struct section_table): Rename to ...
1894 (struct target_section): ... this.
1895 * exec.c: Adjust all references.
1896 * exec.h: Adjust all references.
1897 * nto-tdep.c: Adjust all references.
1898 * nto-tdep.h: Adjust all references.
1899 * ppc-linux-tdep.c: Adjust all references.
1900 * rs6000-nat.c: Adjust all references.
1901 * s390-tdep.c: Adjust all references.
1902 * solib-darwin.c: Adjust all references.
1903 * solib-frv.c: Adjust all references.
1904 * solib-irix.c: Adjust all references.
1905 * solib-null.c: Adjust all references.
1906 * solib-osf.c: Adjust all references.
1907 * solib-pa64.c: Adjust all references.
1908 * solib-som.c: Adjust all references.
1909 * solib-sunos.c: Adjust all references.
1910 * solib-svr4.c: Adjust all references.
1911 * solib-target.c: Adjust all references.
1912 * solib.c: Adjust all references.
1913 * solist.h: Adjust all references.
1914 * symfile.c: Adjust all references.
1915 * symfile.h: Adjust all references.
1916 * target.c: Adjust all references.
1918 2009-05-22 Hui Zhu <teawater@gmail.com>
1920 Add sys_fcntl argument interfaces to linux_record_tdep.
1922 * linux-record.h (linux_record_tdep): Add fcntl_F_GETLK,
1923 fcntl_F_GETLK64, fcntl_F_SETLK64 and fcntl_F_SETLKW64 to be
1925 * i386-linux-tdep.c (I386_LINUX_RECORD_FCNTL_F_GETLK,
1926 I386_LINUX_RECORD_FCNTL_F_GETLK64,
1927 I386_LINUX_RECORD_FCNTL_F_SETLK64,
1928 I386_LINUX_RECORD_FCNTL_F_SETLKW64): New macros. The values
1929 of I386 Linux sys_fcntl arguments.
1930 (i386_linux_init_abi): Set macros values to linux_record_tdep.
1931 * linux-record.c (record_linux_system_call): Change to use
1932 the interface in linux_record_tdep in sys_fcntl and
1935 * linux-record.c (record_linux_system_call): Fix the process
1936 record build error about type in CYGWIN.
1938 2009-05-22 Pedro Alves <pedro@codesourcery.com>
1940 * inflow.c (kill_command): Delete left over static declaration.
1942 2009-05-22 Pedro Alves <pedro@codesourcery.com>
1944 * bfd-target.c: Don't include gdb_assert.h or gdb_string.h.
1946 (struct section_closure): Delete.
1947 (add_to_section_table): Delete.
1948 (build_target_sections_from_bfd): Delete.
1949 (target_bfd_xfer_partial): Use section_table_xfer_memory_partial.
1950 (target_bfd_reopen): Use build_section_table.
1951 * exec.c (xfer_memory): Move most code except for overlay
1952 debugging support from here...
1953 (section_table_xfer_memory): ... to this new function.
1954 (section_table_xfer_memory_partial): New.
1955 * exec.h (section_table_xfer_memory_partial): Declare.
1956 * bfd-target.h (build_target_sections_from_bfd): Delete
1959 2009-05-22 Pedro Alves <pedro@codesourcery.com>
1961 * remote.c (compare_sections_command): Don't declare exec_bfd.
1962 * tracepoint.c: Include "gdbcore.h".
1963 (remote_set_transparent_ranges): Don't declare exec_bfd.
1965 2009-05-21 Pedro Alves <pedro@codesourcery.com>
1967 * aix-thread.c (init_aix_thread_ops): Whitespace.
1969 2009-05-21 Pedro Alves <pedro@codesourcery.com>
1971 * dec-thread.c (dec_thread_wait): Add options parameter. Use it
1972 to call the to_wait method in the target beneath.
1973 * remote-m32r-sdi.c (m32r_wait): Add options parameter.
1975 2009-05-21 Joel Brobecker <brobecker@adacore.com>
1977 * aix-thread.c (aix_thread_wait): Add options parameter. Use it
1978 to call the to_wait method in the target_beneath.
1980 2009-05-21 Pedro Alves <pedro@codesourcery.com>
1982 * linux-nat.c (linux_nat_terminal_inferior)
1983 (linux_nat_terminal_ours): Don't check sync_execution.
1984 * remote.c (remote_terminal_inferior, remote_terminal_ours):
1985 Don't check sync_execution. Update comments.
1986 * target.c (target_terminal_inferior): New.
1987 * target.h (target_terminal_inferior): Delete macro, and declare
1989 * event-top.c (async_disable_stdin): Make idempotent. Don't give
1990 the target the terminal here.
1991 * inflow.c (terminal_ours_1): Don't return early without setting
1994 2009-05-21 Pedro Alves <pedro@codesourcery.com>
1996 * target.h (TARGET_WNOHANG): New.
1997 * target.c (target_wait): Add `options' argument. Adjust.
1998 (struct target_ops) <to_wait>: Add `options' argument.
1999 (target_wait): Add `options' argument.
2000 * infrun.c (wait_for_inferior): Pass 0 as options to
2001 target_wait (blocking wait).
2002 (fetch_inferior_event): Pass TARGET_WNOHANG as options to
2004 * fork-child.c (startup_inferior): Pass 0 as options to
2005 target_wait (blocking wait).
2006 * linux-nat.c (linux_nat_create_inferior): Remove async masking.
2007 (linux_nat_wait_1): Add `target_options' argument. Use it instead
2008 of checking on target_can_async_p.
2009 (linux_nat_wait): Add `target_options' argument. Adjust.
2010 * remote.c (remote_wait_ns): Add `options' argument. Adjust to
2011 check on TARGET_WNOWAIT instead of checking on remote_is_async_p.
2012 (remote_wait_as): Add `options' argument. Adjust to check on
2013 TARGET_WNOWAIT instead of checking on remote_is_async_p. If doing
2014 a blocking wait, keep waiting until an interesting event comes
2016 (remote_wait): Add `options' argument. Don't loop here if the
2017 target is in async mode, and a blocking wait has been requested.
2019 * top.c (deprecated_target_wait_hook): Add `options' argument.
2020 * linux-thread-db.c (thread_db_wait): Add `options' argument, and
2021 pass it down to the layer beneath.
2022 * inf-ptrace.c (inf_ptrace_wait): Add `options' argument.
2023 * record.c (record_beneath_to_wait): Add `options' argument.
2024 (record_wait): Add `options' argument, and pass it down to the
2026 * bsd-uthread.c (bsd_uthread_wait): Add `options' argument.
2027 * darwin-nat.c (darwin_wait): Likewise.
2028 * defs.h (deprecated_target_wait_hook): Likewise.
2029 * gnu-nat.c (gnu_wait): Add `options' argument.
2030 * go32-nat.c (go32_wait): Likewise.
2031 * hpux-thread.c (hpux_thread_wait): Add `options' argument, and
2032 pass it down to the layer beneath.
2033 * inf-ttrace.c (inf_ttrace_wait): Add `options' argument.
2034 * monitor.c (monitor_wait): Likewise.
2035 * nto-procfs.c (procfs_wait): Likewise.
2036 * remote-mips.c (mips_wait): Add `options' argument.
2037 * remote-sim.c (gdbsim_wait): Likewise.
2038 * rs6000-nat.c (rs6000_wait): Add `options' argument.
2039 * sol-thread.c (sol_thread_wait): Add `options' argument, and pass
2040 it down to the layer beneath.
2041 * spu-linux-nat.c (spu_child_wait): Add `options' argument.
2042 * windows-nat.c (windows_wait): Likewise.
2043 * tui/tui-hooks.c (tui_target_wait_hook): Likewise. Adjust.
2045 2009-05-21 Pedro Alves <pedro@codesourcery.com>
2047 * mi/mi-interp.c (mi_on_resume): Account for whole process
2050 2009-05-21 Jan Kratochvil <jan.kratochvil@redhat.com>
2052 * m2-exp.y (MAX_FUNC): Fix trailing UNOP_MAX.
2054 2009-05-21 Jan Kratochvil <jan.kratochvil@redhat.com>
2056 * dwarf2read.c (set_cu_language): Recognize also DW_LANG_C99.
2058 2009-05-21 Jan Kratochvil <jan.kratochvil@redhat.com>
2060 Fix parsing DW_AT_const_value using DW_FORM_string.
2061 * dwarf2read.c (dwarf2_const_value <DW_FORM_string>): New.
2063 2009-05-20 Joel Brobecker <brobecker@adacore.com>
2065 * aix-thread.c (giter_count): Do not count the main thread.
2066 (giter_accum): Do not include the main thread.
2068 2009-05-19 Jan Kratochvil <jan.kratochvil@redhat.com>
2070 Remove the PROT parameter from openp.
2071 * source.c (openp): Remove the parameter PROT. Assertion check MODE.
2072 defs.h (openp): Update the prototype.
2073 Update all the openp callers.
2075 2009-05-19 Pedro Alves <pedro@codesourcery.com>
2077 * inflow.c (kill_command): Moved to infcmd.c.
2078 (_initialize_inflow): Don't add the "kill" command or clear
2080 * infcmd.c (kill_command): Moved here from inflow.c.
2081 (_initialize_infcmd): Add the "kill" command here.
2083 2009-05-19 Pedro Alves <pedro@codesourcery.com>
2085 * fork-child.c: Don't include frame.h. Include terminal.h.
2086 (fork_inferior): Call new_tty_postfork after forking adn adding
2087 the child to the inferior list.
2088 * inferior.h (new_tty_prefork, gdb_has_a_terminal): Don't declare
2090 * inflow.c (struct terminal_info): Remove const qualifier from
2091 `run_terminal' field.
2092 (inferior_thisrun_terminal): Tweak comment.
2093 (inflow_inferior_exit): Release the `run_terminal' field.
2094 (copy_terminal_info): New function.
2095 (new_tty_postfork): New function.
2096 * terminal.h (new_tty_prefork, new_tty, new_tty_postfork,
2097 (copy_terminal_info, gdb_has_a_terminal, gdb_setpgid): Declare.
2098 * inf-ptrace.c: Include terminal.h.
2099 (inf_ptrace_follow_fork): Copy the parent's terminal info to the
2101 * linux-nat.c: Include terminal.h.
2102 (linux_child_follow_fork): Copy the parent's terminal info to the
2104 * inf-ttrace.c: Include terminal.h.
2105 (inf_ttrace_follow_fork): Copy the parent's terminal info to the
2108 2009-05-19 Pedro Alves <pedro@codesourcery.com>
2110 * breakpoint.c (insert_breakpoints, breakpoint_init_inferior)
2111 (update_global_location_list): Use gdbarch_has_global_breakpoints
2112 instead of gdbarch_has_global_solist and
2113 target_supports_multi_process.
2114 * dicos-tdep.c (dicos_init_abi): Set
2115 gdbarch_has_global_breakpoints.
2116 * gdbarch.sh (has_global_solist): Update comment.
2117 (has_global_breakpoints): New.
2118 * remote.c (remote_start_remote): Use
2119 gdbarch_has_global_breakpoints instead of
2120 gdbarch_has_global_solist.
2121 * target.c (target_detach): Use gdbarch_has_global_breakpoints
2122 instead of gdbarch_has_global_solist.
2123 * infcmd.c (attach_command): Use gdbarch_has_global_solist instead
2124 of target_supports_multi_process.
2126 2009-05-18 Paul Pluzhnikov <ppluzhnikov@google.com>
2128 * objc-lang.c (find_methods): Plug a small memory leak.
2130 2009-05-18 Pedro Alves <pedro@codesourcery.com>
2132 * solib-svr4.c: Include observer.h.
2133 (debug_base, debug_loader_offset_p, debug_loader_offset)
2134 (debug_loader_name, main_lm_addr): Move these globals...
2135 (struct svr4_info): ... into this new structure.
2136 (svr4_info_p): New typedef.
2137 (svr4_info): New global.
2138 (get_svr4_info, remove_svr4_info, solib_svr4_inferior_exit): New
2140 (locate_base, solib_svr4_r_map, solib_svr4_r_brk)
2141 (solib_svr4_r_ldsomap): Add svr4_info argument. Adjust to
2143 (open_symbol_file_object): Adjust to per-inferior svr4.
2144 (svr4_default_sos, svr4_current_sos, svr4_fetch_objfile_link_map):
2146 (enable_break): Add svr4_info argument. Adjust to per-inferior
2148 (enable_break, svr4_solib_create_inferior_hook, svr4_clear_solib):
2149 Adjust to per-inferior svr4.
2150 (_initialize_svr4_solib): Install the solib_svr4_inferior_exit
2153 2009-05-18 Pedro Alves <pedro@codesourcery.com>
2155 * linux-nat.h (linux_proc_get_tgid): Declare.
2156 * linux-nat.c (linux_proc_get_tgid): New.
2157 * linux-thread-db.c (struct thread_db_info): New field
2158 `need_stale_parent_threads_check'.
2159 (add_thread_db_info): Set it.
2160 (find_new_threads_callback): Ignore stale fork parent threads.
2161 (thread_db_resume): New.
2162 (init_thread_db_ops): Install thread_db_resume.
2164 2009-05-18 Pedro Alves <pedro@codesourcery.com>
2166 * fork-child.c (fork_inferior): Only reset the thread list if this
2167 is the first inferior.
2168 (startup_inferior): If the target support multi-process, tell it
2169 to resume only the new process.
2170 * linux-nat.c (num_lwps): Delete global.
2171 (purge_lwp_list): New function.
2172 (num_lwps): New function.
2173 (add_lwp, delete_lwp): Adjust.
2175 (iterate_over_lwps): Add filter argument. Handle it.
2176 (linux_nat_attach): Remove FIXME note.
2177 (linux_nat_detach): Adjust to iterate over threads of the inferior
2178 we're detaching from. Adjust to num_lwps being a function. Don't
2179 assume the head of the lwp list is the main thread of the process
2180 we're detaching from. Don't destroy the LWP list.
2181 (resume_callback): Add debug output.
2182 (linux_nat_resume): Handle resuming a single inferior. Allow a
2183 wildcard resume in non-stop mode.
2184 (linux_handle_extended_wait): Don't assume inferior_ptid is the
2185 correct inferior of the parent LWP.
2186 (status_callback): Also check lp->waitstatus.
2187 (select_event_lwp): Add new filter parameter. Handle it.
2188 (linux_nat_filter_event): Adjust to num_lwps being a function.
2189 (linux_nat_wait_1): When adding the first lwp of the inferior, use
2190 an is_lwp check instead of checking for the number of lwps.
2191 (linux_nat_wait_1): Handle waiting for a specific tgid. Handle
2192 pending process exit statuses.
2193 (linux_nat_mourn_inferior): Don't destroy all the LWP info.
2194 Instead delete LWPs of the inferior that we're mourning. Don't
2195 unregister from the event loop here.
2196 (linux_nat_pid_to_str): Use `num_lwps'.
2197 (linux_nat_make_corefile_notes): Adjust to walk over lwps of a
2199 (linux_nat_is_async_p): Check if async was masked out.
2200 (linux_multi_process): New global.
2201 (linux_nat_supports_multi_process): New.
2202 (linux_nat_stop_lwp): Remove LWP filtering. It is done by the
2204 (linux_nat_stop): Adjust to make iterate_over_lwps itself do the
2206 (linux_nat_close): New.
2207 (linux_nat_add_target): Register linux_nat_close and
2208 linux_nat_supports_multi_process.
2209 * linux-nat.h (iterate_over_lwps): Add filter argument.
2210 * linux-thread-db.c (thread_db_handle): Delete.
2211 (proc_handle, thread_agent, td_init_p, td_ta_new_p)
2212 (td_ta_map_id2thr_p, td_ta_map_lwp2thr_p, td_ta_thr_iter_p)
2213 (td_ta_event_addr_p, td_ta_set_event_p, td_ta_event_getmsg_p)
2214 (td_thr_validate_p, td_thr_get_info_p, td_thr_event_enable_p)
2215 (td_thr_tls_get_addr_p, td_create_bp_addr, td_death_bp_addr): No
2216 longer globals, moved to...
2217 (struct thread_db_info): ... this new structure.
2218 (thread_db_list): New.
2219 (add_thread_db_info, get_thread_db_info, delete_thread_db_info):
2221 (have_threads_callback): Filter out threads of all inferiors but
2222 the one specified by the ARGS argument.
2223 (have_threads): Add ptid argument specifying the inferior we're
2224 interested in. Handle it.
2225 (struct thread_get_info_inout): New.
2226 (thread_get_info_callback, thread_from_lwp): Adjust to use it.
2227 (thread_db_attach_lwp): Check that inferior of the passed in
2228 thread is using thread-db. Adjust.
2229 (enable_thread_event): Remove thread_agent parameter. Instead,
2230 get it from the per-inferior thread-db info.
2231 (dladdr_to_soname): Move higher up.
2232 (enable_thread_event_reporting): Adjust to use per-inferior
2234 (try_thread_db_load_1): Replace `handle' parameter by a
2235 thread_db_info parameter. Adjust to use per-inferior thread-db
2237 (try_thread_db_load): Adjust to use per-inferior thread-db info.
2238 (thread_db_load, disable_thread_event_reporting): Ditto.
2239 (check_for_thread_db): Remove conditional reporting of which
2240 libthread_db is in use.
2241 (thread_db_new_objfile): Add comment about inferior_ptid.
2242 (attach_thread): Adjust to use per-inferior thread-db info.
2243 (thread_db_detach): Adjust to use per-inferior thread-db info.
2244 Remove thread event breakpoints of the current inferior. Only
2245 unpush the thread-db target if there are no more processes using
2247 (check_event): Adjust to use per-inferior thread-db info.
2248 (thread_db_wait): Adjust to use per-inferior thread-db info. Only
2249 unpush the thread-db target if there are no more processes using
2251 (thread_db_mourn_inferior): Adjust to use per-inferior thread-db
2252 info. Mark breakpoints of the current inferior out before
2253 deleting them. Only unpush the thread-db target if there are no
2254 more processes using it.
2255 (find_new_threads_callback): Adjust to use per-inferior thread_db
2257 (thread_db_find_new_threads_1): Add new ptid argument. Adjust to
2258 use per-inferior thread-db info.
2259 (thread_db_find_new_threads): Adjust to use per-inferior thread-db
2261 (thread_db_get_thread_local_address): Adjust.
2262 (thread_db_get_ada_task_ptid): Adjust.
2263 * inf-ptrace.c (inf_ptrace_mourn_inferior): Only unpush the target
2264 if there no more processes left to debug.
2265 * thread.c (set_running, set_executing): Handle resuming all
2266 threads of a single inferior.
2267 * mi/mi-interp.c (mi_output_running_pid): New.
2268 (mi_inferior_count): New.
2269 (mi_on_resume): For backwards compatibility, if resuming all
2270 threads of an inferior, and there is only one inferior, output
2273 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
2275 * ada-lang.c (ada_find_any_type): Move check for primitive types ...
2276 (to_fixed_range_type): ... to here.
2278 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
2280 * ada-lang.c (desc_data_type): Remove, replace by ...
2281 (desc_data_target_type): ... this.
2282 (thin_data_pntr): Use desc_data_target_type instead of desc_data_type.
2283 (ada_is_array_descriptor_type): Likewise.
2284 (ada_type_of_array): Likewise.
2285 (ada_coerce_to_simple_array_type): Likewise.
2286 (ada_array_element_type): Likewise.
2288 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
2290 * ada-valprint.c (ada_val_print_1): Use val_print_string to print
2291 result of ada_vax_float_print_function inferior call.
2293 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
2295 * ada-lang.c (ada_coerce_to_simple_array_type): Reimplement to
2296 avoid creating a dummy value.
2298 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
2300 * p-valprint.c (pascal_val_print): Use extract_typed_address
2301 to extract reference value.
2303 2009-05-18 Ulrich Weigand <uweigand@de.ibm.com>
2305 * doublest.c (NAN): Remove unused define.
2306 (extract_floating_by_length, deprecated_extract_floating): Remove.
2307 (store_floating_by_length, deprecated_store_floating): Remove.
2308 (extract_typed_floating): Do not call extract_floating_by_length.
2309 (store_typed_floating): Do not call store_floating_by_length.
2310 (convert_typed_floating): Remove redundant assertions.
2311 * doublest.h (deprecated_extract_floating): Remove.
2312 (deprecated_store_floating): Remove.
2313 * sh64-tdep.c (sh64_register_convert_to_raw): Call
2314 extract_typed_floating instead of deprecated_extract_floating.
2316 2009-05-18 Jon Beniston <jon@beniston.com>
2318 * MAINTAINERS: Add lm32 target.
2319 * Makefile.in: Add lm32 dependencies.
2320 * NEWS: Indicate lm32 is a new target.
2321 * configure.tgt: Add lm32 targets.
2322 * lm32-tdep.c: New file.
2324 2009-05-18 Pedro Alves <pedro@codesourcery.com>
2326 * corelow.c (core_open): Flush the register cache before doing
2327 anything with registers.
2329 2009-05-18 Pedro Alves <pedro@codesourcery.com>
2331 * inflow.h (our_process_group): Remove declaration.
2332 (inferior_process_group): Delete global variable declaration.
2333 (inferior_process_group): New function declaration.
2334 * inflow.c: Include observer.h.
2335 (inferior_ttystate, our_ttystate, tflags_inferior, tflags_ours):
2337 (struct terminal_info): New struct.
2338 (our_terminal_info): New global.
2339 (inferior_process_group): New function.
2340 (inferior_thisrun_terminal): Extend description comment.
2341 (gdb_has_a_terminal): Adjust to write to our_terminal_info fields
2343 (terminal_init_inferior_with_pgrp): Adjust to per-inferior
2345 (terminal_inferior): Ditto.
2346 (terminal_ours_1): Ditto.
2347 (inflow_new_inferior, inflow_inferior_exit): New functions.
2348 (child_terminal_info): Adjust to per-inferior terminal settings.
2349 (osig_set): New global.
2350 (set_sigint_trap): Adjust to per-inferior terminal settings. Set
2351 or clear `osig_set' accordingly.
2352 (clear_sigint_trap): Check `osig_set' to decide wheater to restore
2353 SIGINT handler, instead of checking the current inferior (which
2355 (_initialize_inflow): Attach inflow_new_inferior and
2356 inflow_inferior_exit to the "new_inferior" and "inferior_exit"
2357 notifications, respectively.
2358 * inferior.h (struct terminal_info): Forward declare.
2359 (struct inferior): Add `terminal_info' field.
2360 * inferior.c (delete_inferior_1): Notify the inferior_exit
2361 observers before removing the inferior from the lists and deleting
2363 * inf-ptrace.c (inf_ptrace_stop): `inferior_process_group' is now
2364 a function instead of a variable. Adjust.
2365 * procfs.c (procfs_stop): Ditto.
2367 2009-05-17 Pedro Alves <pedro@codesourcery.com>
2369 * infrun.c (handle_inferior_event): When handling a
2370 TARGET_WAITKIND_FORKED, detach breakpoints from the fork child
2372 * linux-nat.c (linux_child_follow_fork): Only detach breakpoints
2373 from the child if vforking.
2374 * inf-ptrace.c (inf_ptrace_follow_fork): No need to detach
2375 breakpoints from the child here.
2377 2009-05-17 Pedro Alves <pedro@codesourcery.com>
2379 * infrun.c (pending_follow): Remove execd_pathname member.
2380 (resume): No longer handle TARGET_WAITKIND_EXECD pending follow.
2381 (handle_inferior_event): When handling a TARGET_WAITKIND_EXECD
2382 event, don't copy `execd_pathname' to pending_follow, use the
2383 event copy instead. Release `execd_pathname' once done with
2386 * infrun.c (pending_follow): Remove mention of exec events.
2388 2009-05-17 Hui Zhu <teawater@gmail.com>
2390 * i386-tdep.c (i386_process_record): Make it extern.
2391 (i386_gdbarch_init): Don't call set_gdbarch_process_record
2393 * i386-tdep.h (i386_process_record): Declare.
2394 * i386-linux-tdep.c (i386_linux_init_abi): Call
2395 set_gdbarch_process_record.
2397 2009-05-17 Vladimir Prus <vladimir@codesourcery.com>
2399 Always report varobj as changed when in_scope attribute changes.
2401 * varobj.c (install_new_value): If non-NULL-ness of value
2404 2009-05-15 Paul Pluzhnikov <ppluzhnikov@google.com>
2406 * NEWS: Mention set/show libthread-db-search-path.
2407 * gdb_thread_db.h (LIBTHREAD_DB_SEARCH_PATH): New define.
2408 (LIBTHREAD_DB_SO): Moved from linux-thread-db.c
2409 * linux-thread-db.c (libthread_db_search_path): New setting.
2410 (thread_db_handle): New variable (replaces using_thread_db).
2411 (try_thread_db_load_1): New function.
2412 (try_thread_db_load, thread_db_load_search): Likewise.
2413 (dladdr_to_soname): Likewise.
2414 (thread_db_load): Iterate over possibly multiple libthread_db's.
2415 (check_for_thread_db): Attempt to load new libthread_db.
2416 (thread_db_detach, thread_db_wait): Unload libthread_db.
2417 (thread_db_mourn_inferior): Likewise.
2418 (_initialize_thread_db): Add new libthread-db-search-path option.
2419 Defer loading of libthread_db to check_for_thread_db.
2420 * solib.c (libpthread_name_p): New function.
2421 (libpthread_solib_p): Call it.
2422 * solib.h (libpthread_name_p): New prototype.
2424 2009-05-15 Pierre Muller <muller@ics.u-strasbg.fr>
2426 * MAINTAINERS: Update my email address.
2428 2009-05-14 Paul Pluzhnikov <ppluzhnikov@google.com>
2430 * breakpoint.h: Add breakpoint_re_set_objfile prototype.
2431 * breakpoint.c (create_overlay_event_breakpoint): Renamed
2432 from create_overlay_event_breakpoint_1, old
2433 create_overlay_event_breakpoint deleted.
2434 (breakpoint_re_set_objfile): Don't rescan all objfiles
2436 (breakpoint_re_set): New function.
2437 * symfile.c (new_symfile_objfile): Call breakpoint_re_set_objfile
2438 instead of breakpoint_re_set.
2439 * objfiles.c (objfile_relocate): Likewise.
2441 2009-05-14 Joel Brobecker <brobecker@adacore.com>
2443 * gdbarch.sh: Add comment documenting the target_gdbarch global.
2444 gdbarch.h does NOT need to be regenerated as the corresponding
2445 change has already been made in a previous commit.
2447 2009-05-14 Pierre Muller <muller@ics.u-strasbg.fr>
2449 Remove all i386 debug register low level macros in config nm files.
2450 (I386_DR_LOW_SET_ADDR, I386_DR_LOW_RESET_ADDR): Remove.
2451 (I386_DR_LOW_GET_STATUS, I386_DR_LOW_SET_CONTROL): Remove.
2452 (I386_USE_GENERIC_WATCHPOIINTS): Remove.
2454 * i386-nat.h: New file (adapted from config/i386/nm-i386.h).
2455 (struct i386_dr_low_type): New type.
2456 (i386_dr_low): New global variable.
2457 * i386-nat.c (TARGET_HAS_DR_LEN_8): Update macro.
2458 (i386_insert_aligned_watchpoint): Replace i386 dr low macros by
2459 i386_dr_low struct variable fields.
2460 (i386_remove_aligned_watchpoint): Likewise.
2461 (i386_stopped_data_address): Likewise.
2462 (i386_stopped_by_hwbp): Likewise.
2463 (show_debug_regs_command_added): New static variable.
2464 (add_show_debug_regs_command): New static function.
2465 (i386_use_watchpoints): Call add_show_debug_regs_command if not done.
2466 (i386_set_debug_register_length): New function.
2467 (_initialize_i386_nat): Delete.
2469 * amd64-linux-nat.c: Include "i386-nat.h".
2470 (amd64_linux_dr_set_control): Change to static.
2471 (amd64_linux_dr_get_status): Change to static.
2472 (amd64_linux_dr_set_addr,amd64_linux_dr_reset_addr): Likewise.
2473 (_initialize_amd64_linux_nat): Set i386_dr_low variable fields.
2475 * go32-nat.c: Include "i386-nat.h".
2476 (go32_set_addr): Change to static.
2477 (go32_set_dr7): Change to static. Change arg type to unisgned long.
2478 (go32_get_dr6): Change to static. Change return type to unisnged long.
2479 (init_go32_ops): Set i386_dr_low variable fields.
2480 * i386-linux-nat.c: Include "i386-nat.h".
2481 (i386_linux_dr_set_control, i386_linux_dr_get_status): Change to static.
2482 (i386_linux_dr_set_addr, i386_linux_dr_reset_addr): Idem.
2483 (_initialize_i386_linux_nat): Set i386_dr_low variable fields.
2484 * i386bsd-nat.h: Declare functions used for
2485 i386_dr_low fields in i386fbsd-nat.c.
2486 * i386fbsd-nat.c: Include "i386-nat.h".
2487 (_initialize_i386fbsd_nat): Set i386_dr_low variable fields.
2488 * windows-nat.c: Include "i386-nat.h".
2489 (cygwin_set_dr, cygwin_get_dr6, cygwin_set_dr7): Add prototypes.
2491 (cygwin_get_dr6): Change return type to unisnged long.
2492 (cygwin_set_dr7): Change arg type to unisgned long.
2493 (init_windows_ops): Set i386_dr_low function fields.
2495 * amd64-windows-nat.c (_initialize_amd64_windows_nat): Call
2496 i386_set_debug_register_length.
2497 * i386-windows-nat.c (_initialize_i386_windows_nat): Likewise.
2499 * config/i386/nm-cygwin.h: Remove all I386_* macros.
2500 * config/i386/nm-cygwin64.h: Likewise.
2501 * config/i386/nm-fbsd.h: Likewise.
2502 * config/i386/nm-linux.h: Likewise.
2503 * config/i386/nm-i386.h: Remove completely.
2504 * config/i386/nm-go32.h: Remove completely.
2505 * config/i386/nm-linux64.h: Remove completely.
2506 * config/i386/go32.mh (NAT_FILE): Remove entry.
2507 * config/i386/linux64.h (NAT_FILE): Change to config/nm-linux.h.
2509 2009-05-14 Jon Beniston <jon@beniston.com>
2511 * MAINTAINERS: Add Jon Beniston to write after approval list.
2513 2009-05-13 Paul Pluzhnikov <ppluzhnikov@google.com>
2515 * objc-lang.c (objc_objfile_data): New variable.
2516 (find_methods): Skip objfiles without Obj-C methods.
2517 (_initialize_objc_lang): New function.
2519 2009-05-13 Joel Brobecker <brobecker@adacore.com>
2521 * c-lang.c (print_wchar): Remove unnecessary cast.
2523 2009-05-12 Jim Blandy <jimb@red-bean.com>
2525 * MAINTAINERS: Remove self as m32c target maintainer.
2527 2009-05-12 Pedro Alves <pedro@codesourcery.com>
2529 * cli/cli-decode.c (deprecated_add_set_cmd): Delete.
2530 * command.h (deprecated_add_set_cmd): Delete declaration.
2531 * gnu-nat.c (_initialize_gnu_nat): Replace 'maint gnu-debug' with
2532 'set debug gnu-nat' and 'show debug gnu-nat'.
2533 * i386-nat.c (_initialize_i386_nat): Replace 'maint
2534 show-debug-registers' with 'maint set show-debug-registers' and
2535 'maint show show-debug-registers'.
2536 * mips-linux-nat.c (_initialize_mips_linux_nat): Replace 'maint
2537 show-debug-registers' with 'maint set show-debug-registers' and
2538 'maint show show-debug-registers'.
2540 2009-05-12 Joel Brobecker <brobecker@adacore.com>
2542 * c-lang.c (print_wchar): Convert w into a gdb_wchar_t before
2543 pushing it on the output obstack.
2545 2009-05-11 Joel Brobecker <brobecker@adacore.com>
2547 Fix internal error on breaking at a multi-locations caller source line.
2548 * breakpoint.c (parse_breakpoint_sals): Set EXPLICIT_PC for the `break'
2549 command with no parameters.
2551 2009-05-11 Pedro Alves <pedro@codesourcery.com>
2553 * linux-nat.c (enum sigchld_state): Delete.
2554 (linux_nat_async_events_state): Delete.
2555 (struct waitpid_result): Delete.
2556 (waitpid_queue): Delete.
2557 (queued_waitpid_1): Delete.
2558 (async_file_flush): New.
2559 (queued_waitpid, push_waitpid): Delete.
2560 (async_file_mark): New.
2561 (drain_queued_events): Delete.
2562 (my_waitpid): Remove locally queued events handling.
2563 (linux_test_for_tracefork): Upjust.
2564 (linux_child_follow_fork): Ditto.
2565 (sync_sigchld_action): Delete.
2566 (blocked_mask): Reinstate.
2567 (async_sigchld_action): Rename to...
2568 (sigchld_action): ... this.
2569 (block_child_signals): New.
2570 (restore_child_signals_mask): New.
2571 (lin_lwp_attach_lwp): Adjust.
2572 (linux_nat_create_inferior): Ditto.
2573 (linux_nat_attach): Also use lp->status in async mode.
2574 (get_pending_status): Don't use queued_waitpid.
2575 (linux_nat_detach): Don't drain locally queued events.
2576 (linux_nat_resume): Allow pending wait statuses stored lp->status
2577 in async mode. If returning early due to a pending event,
2578 re-register the event source.
2579 (stop_wait_callback): Allow pending wait statuses stored
2580 lp->status in async mode.
2581 (pipe_to_local_event_queue, local_event_queue_to_pipe): Delete.
2582 (linux_nat_wait): Rename to ...
2583 (linux_nat_wait_1): ... this. Allow pending wait statuses stored
2584 lp->status in async mode. Always add WNOHANG to the waitpid
2585 options in async mode.
2586 (linux_nat_wait): New.
2587 (kill_callback): Don't drain locally queued events.
2588 (sigchld_handler): Rewrite.
2589 (linux_nat_is_async_p, linux_nat_can_async_p): Fix comments to
2590 refer to "set target-async".
2591 (linux_nat_async_mask): If in non-stop, and re-enabling async
2592 mode, re-register the target event source in the event loop.
2593 (linux_nat_event_pipe_pop, linux_nat_event_pipe_push)
2594 (get_pending_events, async_sigchld_handler)
2595 (linux_nat_async_events): Delete.
2596 (handle_target_event): New.
2597 (linux_nat_async_file_handler): Delete.
2598 (linux_async_pipe): New.
2599 (linux_nat_async): Only re-register in the event loop if not
2600 registered yet. Always notify the event-loop once if enabling the
2602 (linux_nat_stop_lwp): Rewrite to handle pending events stored in
2603 lp->status, not in the locally queued event list.
2604 (linux_nat_stop): Don't mask out async event handling.
2605 (linux_nat_setup_async): Delete.
2606 (_initialize_linux_nat): Adjust.
2607 (lin_thread_get_thread_signals): blocked_mask is global again.
2610 2009-05-11 Pierre Muller <muller@ics.u-strasbg.fr>
2612 Unify target macros.
2614 * target.h (STOPPED_BY_WATCHPOINT): Delete, replaced by ...
2615 (target_stoppped_by_watchpoint): New macro.
2616 (HAVE_STEPPABLE_WATCHPOINT): Delete, replaced by ...
2617 (target_have_steppable_watchpoint): New macro.
2618 (HAVE_CONTINUABLE_WATCHPOINT): Delete, replace by ...
2619 (target_have_continuable_watchpoint): New macro.
2620 (TARGET_CAN_USE_HARDWARE_WATCHPOINT):Delete, replaced by ...
2621 (target_can_use_hardware_watchpoint): New macro.
2622 (TARGET_REGION_OK_FOR_HW_WATCHPOINT):Delete, replaced by ...
2623 (target_region_ok_for_hw_watchpoint): New macro.
2625 * breakpoint.c (update_watchpoint): Use new macros.
2626 (bpstat_alloc): Likewise.
2627 (create_breakpoint): Likewise.
2628 (watch_command_1): Likewise.
2629 (can_use_hardware_watchpoint): Likewise.
2630 (do_enable_breakpoint): Likewise.
2631 * infrun.c (handle_inferior_event): Adapt to new macros.
2632 * mips-tdep.c (mips_gdbarch_init): Update comments.
2633 * procfs.c (procfs_set_watchpoint): Update comment.
2634 (procfs_insert_watchpoint): Adapt to new macros.
2635 * remote-m32r-sdi.c (m32r_stop):
2636 * remote-mips.c (mips_remove_breakpoint):
2637 * target.c (debug_to_region_ok_for_hw_watchpoint): Update to new macros.
2638 (debug_to_stopped_by_watchpoint): Likewise.
2641 2009-05-10 Pierre Muller <muller@ics.u-strasbg.fr>
2643 * src/gdb/target.h: Remove all tests for already defined
2644 macros. All macros defined here should not be set in config
2647 2009-05-08 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
2649 * ppc-linux-nat.c (have_ptrace_getsetregs): New variable.
2650 (have_ptrace_getsetfpregs): Likewise.
2651 fetch_all_gp_regs): New function.
2652 (fetch_gp_regs): New function.
2653 (fetch_all_fp_regs): Likewise.
2654 (fetch_fp_regs): New function.
2655 (fetch_ppc_registers): Using the new methods to fetch general-
2656 purpose and floating-pointer registers.
2657 (store_all_gp_regs): New function.
2658 (store_gp_regs): Likewise.
2659 (store_all_fp_regs): New function.
2660 (store_fp_regs): Likewise.
2661 (store_ppc_registers): Using the new methods to store general-
2662 purpose and floating-pointer registers.
2664 2009-05-08 Doug Evans <dje@google.com>
2666 * linux-nat.c (linux_xfer_siginfo): Delete unused locals lp, n.
2668 2009-05-07 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
2670 * MAINTAINERS (Write After Approval): Add self.
2672 2009-05-07 Joel Brobecker <brobecker@adacore.com>
2674 * gdbarch.h (target_gdbarch): Add comment documenting this global.
2676 2009-05-06 Joel Brobecker <brobecker@adacore.com>
2678 * acinclude.m4 (AM_ICONV): Prefer in-tree libiconv if present over
2680 * configure: Regenerate.
2682 2009-05-06 Joel Brobecker <brobecker@adacore.com>
2684 * utils.c: Add include of gdb_usleep.h.
2685 (defaulted_query): Detect false EOF conditions that happen
2686 on terminals opened with the O_NONBLOCK flag when there is
2689 2009-05-06 Pedro Alves <pedro@codesourcery.com>
2691 * inferior.c (add_inferior): Move observer_notify_new_inferior
2693 (add_inferior_silent): ... here.
2695 2009-05-06 Pierre Muller <muller@ics.u-strasbg.fr>
2696 Pedro Alves <pedro@codesourcery.com>
2698 * procfs.c (procfs_insert_watchpoint, procfs_remove_watchpoint)
2699 (procfs_region_ok_for_hw_watchpoint, procfs_use_watchpoints): New
2701 (procfs_stopped_by_watchpoint): Made static, ptid argument
2703 (_initialize_procfs): Register new watchpoint related target
2705 * config/i386/nm-i386sol2.h (TARGET_CAN_USE_HARDWARE_WATCHPOINT)
2706 (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT, STOPPED_BY_WATCHPOINT)
2707 (HAVE_CONTINUABLE_WATCHPOINT): Delete.
2708 (target_insert_watchpoint, target_remove_watchpoint): Delete.
2709 (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete
2711 * config/mips/nm-irix5.h (STOPPED_BY_WATCHPOINT)
2712 (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT): Delete.
2713 (target_insert_watchpoint, target_remove_watchpoint): Delete.
2714 (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete
2716 * config/sparc/nm-sol2.h (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT)
2717 (HAVE_CONTINUABLE_WATCHPOINT, STOPPED_BY_WATCHPOINT): Delete.
2718 (target_insert_watchpoint, target_remove_watchpoint): Delete.
2719 (procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete
2722 2009-05-06 Hui Zhu <teawater@gmail.com>
2724 * i386-tdep.c (i386_process_record): Change bzero to memset.
2726 2009-05-06 Hui Zhu <teawater@gmail.com>
2728 * NEWS: Add item for process record and replay.
2730 2009-05-05 Maxim Grigoriev <maxim2405@gmail.com>
2732 * xtensa-tdep.c (xtensa_frame_cache): Use pc instead of cache->pc.
2734 2009-05-05 Ulrich Weigand <uweigand@de.ibm.com>
2736 * inferior.h (read_pc, write_pc): Remove.
2737 * regcache.c (read_pc, write_pc): Remove.
2739 * infrun.c (displaced_step_fixup): Use regcache_read_pc instead
2741 (handle_inferior_event): Use regcache_read_pc instead of read_pc
2742 when determining value of stop_pc. Replace subsequent uses of
2743 read_pc by inspecting already-retrieved stop_pc value.
2744 (keep_going): Use regcache_read_pc instead of read_pc.
2746 * breakpoint.c (watchpoint_check): Use current frame architecture
2747 and PC instead of current_gdbarch and read_pc ().
2748 * tracepoint.c (set_traceframe_context): Replace PC argument
2749 with FRAME argument.
2750 (trace_start_command, finish_tfind_command): Update calls.
2751 (finish_tfind_command): Compare frame IDs to identify transitions
2753 (trace_find_pc_command): Use regcache_read_pc instead of read_pc.
2754 * rs6000-nat.c (exec_one_dummy_insn): Pass in regcache instead
2755 of gdbarch. Use regcache_read_pc and regcache_write_pc instead
2756 of read_pc and write_pc.
2757 (store_register): Make regcache argument non-const. Update call
2758 to exec_one_dummy_insn.
2760 * thread.c (switch_to_thread): Use regcache_read_pc instead of read_pc.
2761 * infcmd.c (post_create_inferior): Likewise.
2762 * solib-darwin.c (darwin_solib_create_inferior_hook): Likewise.
2763 * solib-pa64.c (pa64_solib_create_inferior_hook): Likewise.
2764 * solib-sunos.c (sunos_solib_create_inferior_hook): Likewise.
2765 * solib-svr4.c (enable_break, svr4_relocate_main_executable): Likewise.
2766 * linux-fork.c (fork_load_infrun_state): Likewise.
2767 * hppa-hpux-tdep.c (hppa_hpux_push_dummy_code): Likewise.
2768 * record.c (record_wait): Likewise.
2769 * procfs.c (procfs_wait): Likewise.
2770 * remote-mips.c (common_open, mips_wait): Likewise.
2771 * remote-m32r-sdi.c (m32r_resume): Likewise.
2773 * symfile.c (generic_load): Use regcache_write_pc instead of write_pc.
2774 * monitor.c (monitor_create_inferior, monitor_load): Likewise.
2775 * m32r-rom.c (m32r_load, m32r_upload_command): Likewise.
2776 * remote-m32r-sdi.c (m32r_create_inferior, m32r_load): Likewise.
2777 * remote-mips.c (mips_create_inferior, mips_load): Likewise.
2779 * solib-darwin.c: Include "regcache.h".
2780 * solib-pa64.c: Include "regcache.h".
2781 * solib-svr4.c: Include "regcache.h.".
2783 * symfile.c: Do not mention read_pc or write_pc in comments.
2784 * dink32-rom.c: Likewise.
2785 * m32r-rom.c: Likewise.
2786 * mips-tdep.c: Likewise.
2788 2009-05-05 Ulrich Weigand <uweigand@de.ibm.com>
2790 * fork-child.c (startup_inferior): Move setting stop_pc ...
2791 * infcmd.c (post_create_inferior): ... to here.
2793 2009-05-04 Michael Snyder <msnyder@vmware.com>
2795 * NEWS: Add item for reverse debugging commands.
2797 2009-05-04 Pedro Alves <pedro@codesourcery.com>
2799 * go32-nat.c (go32_stop): Delete.
2800 (go32_kill_inferior): Rewrite to only call go32_mourn_inferior.
2801 (go32_create_inferior): Don't call go32_stop or
2803 (go32_mourn_inferior): Inline go32_stop and go32_kill_inferior
2805 (init_go32_ops): Don't register go32_stop.
2807 2009-05-02 Eli Zaretskii <eliz@gnu.org>
2809 * dbxread.c (read_dbx_symtab): Avoid compiler warnings for
2812 * infcall.c (find_function_addr): Avoid compiler warnings for
2815 2009-05-01 Jan Kratochvil <jan.kratochvil@redhat.com>
2817 * dictionary.c (dict_hashed_vector, dict_hashed_expandable_vector)
2818 (dict_linear_vector, dict_linear_expandable_vector): Fix a comment typo.
2820 2009-05-01 Doug Evans <dje@google.com>
2822 * linux-thread-db.c (thread_db_pid_to_str): Delete unused assignment
2825 2009-05-01 Eli Zaretskii <eliz@gnu.org>
2827 * record.c (_initialize_record): Reformat and clarify doc strings
2828 for stop-at-limit and insn-number-max.
2830 * go32-nat.c: Add comments about dirty secrets of DJGPP debugging.
2832 2009-05-01 Jan Kratochvil <jan.kratochvil@redhat.com>
2834 Make specifiable the make_function_type type memory ownership.
2835 * gdbtypes.c (make_function_type): New parameter `objfile', use it
2836 explicitely instead of TYPE-initialized removed local variable
2837 `objfile'. Describe `objfile' it in the function comment.
2838 (lookup_function_type): Update make_function_type callers.
2839 * gdbtypes.h (make_function_type): Update the prototype.
2840 * jv-lang.c (java_link_class_type): Update make_function_type callers.
2841 * dwarf2read.c (read_subroutine_type): Likewise.
2842 * stabsread.c (read_type): Likewise.
2844 2009-05-01 Eli Zaretskii <eliz@gnu.org>
2846 * go32-nat.c (go32_pid_to_str): Call normal_pid_to_str instead of
2847 printing a bogus "Thread <main>".
2848 (go32_thread_alive): Don't return 1 for null_ptid.
2850 * i386-tdep.c (i386_go32_init_abi): Override the number of
2851 registers due to non-support of SSE.
2853 2009-04-30 Anthony Green <green@moxielogic.com>
2855 * configure.tgt: Link the moxie simulator in with gdb.
2857 2009-04-30 Paul Pluzhnikov <ppluzhnikov@google.com>
2859 * elfread.c (elf_symtab_read): Don't assume .data and .rodata
2862 2009-04-30 Hui Zhu <teawater@gmail.com>
2863 Michael Snyder <msnyder@vmware.com>
2865 I386 Linux process record and replay support.
2867 * i386-linux-tdep.c (i386_linux_record_tdep): New variable.
2868 This struct has the argument for the function
2869 "record_linux_system_call".
2870 (i386_linux_intx80_sysenter_record): New function. Parse the
2871 system call instruction and call function
2872 "record_linux_system_call" to record execute log.
2873 (i386_linux_init_abi): Initialize "i386_linux_record_tdep".
2874 Set "i386_linux_intx80_sysenter_record" to
2875 "i386_intx80_record" and "i386_sysenter_record".
2877 2009-04-30 Hui Zhu <teawater@gmail.com>
2878 Michael Snyder <msnyder@vmware.com>
2880 I386 architecture process record and replay support.
2882 * i386-tdep.c (PREFIX_REPZ, PREFIX_REPNZ, PREFIX_LOCK,
2883 PREFIX_DATA, PREFIX_ADDR): New macros. Help decode the i386
2885 (aflag, dflag, override, modrm, mod, reg, rm, ot,
2886 i386_record_pc): New variables. Ditto.
2887 (i386_record_modrm, i386_record_lea_modrm_addr,
2888 i386_record_lea_modrm): New functions. Ditto.
2889 (i386_process_record): New function. Parse the instruction in
2890 address "addr" and record the values of registers and memory
2891 that will be changed by this instruction.
2892 (i386_gdbarch_init): Set "i386_process_record" to GDBARCH
2893 "process_record" interface.
2894 * i386-tdep.h (gdbarch_tdep): New function pointers
2895 "i386_intx80_record" and "i386_sysenter_record" that point to
2896 the function that can record "intx80" and "sysenter" execute
2899 2009-04-30 Hui Zhu <teawater@gmail.com>
2900 Michael Snyder <msnyder@vmware.com>
2902 * infrun.c (use_displaced_stepping): Return false if process
2903 record and replay target is used.
2904 (proceed): Call function "record_not_record_set" if pocess
2905 record and replay target is used.
2907 2009-04-30 Hui Zhu <teawater@gmail.com>
2908 Michael Snyder <msnyder@vmware.com>
2910 Linux process record and replay support.
2912 * Makefile.in (ALLDEPFILES): Add linux-record.c.
2913 (ALL_TARGET_OBS): Add linux-record.o.
2914 * configure.tgt (x86_64-*-linux*): Add linux-record.o.
2915 (i[34567]86-*-linux*): Add linux-record.o.
2916 * linux-record.c, linux-record.h: New file.
2918 2009-04-30 Hui Zhu <teawater@gmail.com>
2919 Michael Snyder <msnyder@vmware.com>
2921 Process record and replay target.
2923 * Makefile.in (SFILES): Add record.c.
2924 (COMMON_OBS): Add record.o.
2925 * record.c, record.h: New file.
2927 2009-04-30 Hui Zhu <teawater@gmail.com>
2928 Michael Snyder <msnyder@vmware.com>
2930 * target.h (strata): New stratum "record_stratum".
2932 2009-04-30 Hui Zhu <teawater@gmail.com>
2933 Michael Snyder <msnyder@vmware.com>
2935 GDBARCH interface for process record and replay.
2937 * gdbarch.sh (process_record): This interface point to the
2938 function that records the inferior execute log.
2940 2009-04-29 Doug Evans <dje@google.com>
2942 * i386-nat.c (child_post_startup_inferior): Delete, unused.
2944 2009-04-29 Pedro Alves <pedro@codesourcery.com>
2946 * breakpoint.c (print_exception_catchpoint): Access `b' directly
2947 instead of `b->loc->owner'.
2948 (print_mention_exception_catchpoint): Ditto.
2950 2009-04-29 Jan Kratochvil <jan.kratochvil@redhat.com>
2952 * macrocmd.c (info_macro_command): Print -Dname=value if LINE is zero.
2954 2009-04-27 Tom Tromey <tromey@redhat.com>
2956 * c-exp.y (yylex): Handle '[' and ']' like '(' and ')'.
2958 2009-04-27 Jerome Guitton <guitton@adacore.com>
2960 * symtab.c (append_exact_match_to_sals): New function, extracted
2961 from expand_line_sal.
2962 (expand_line_sal): Use append_exact_match_to_sals to append exact
2963 matches. If none found, append all best items.
2965 2009-04-27 Jerome Guitton <guitton@adacore.com>
2967 * main.c (captured_main): Move gdbinit lookups after gdb_init.
2969 2009-04-27 Jan Kratochvil <jan.kratochvil@redhat.com>
2972 * dwarf2read.c (unsigned_int_compar, inherit_abstract_dies): New.
2973 (read_func_scope): Call inherit_abstract_dies.
2975 2009-04-25 Eli Zaretskii <eliz@gnu.org>
2977 * Makefile.in (ALLDEPFILES): Remove duplicate entries for
2978 sparc-sol2-nat.c and sparc-sol2-tdep.c.
2980 * stack.c (_initialize_stack) <disassemble-next-line>: Doc fix.
2982 2009-04-24 Pierre Muller <muller@ics.u-strasbg.fr>
2984 ARI change: Use "/* ARI: rule */" pattern.
2985 * utils.c: Update ARI patterns.
2986 * gdb_dirent.h: Likewise.
2988 2009-04-23 Anthony Green <green@moxielogic.com>
2990 * MAINTAINERS: Add moxie target.
2991 * configure.tgt: Add moxie-*-elf target.
2992 * moxie-tdep.c: New file.
2993 * moxie-tdep.h: New file.
2995 2009-04-23 Joel Brobecker <brobecker@adacore.com>
2997 * ada-lang.c: Remove an extra empty line. No code change.
2999 2009-04-23 Jan Kratochvil <jan.kratochvil@redhat.com>
3001 Fix double free on error inserting the breakpoint instruction.
3002 * breakpoint.c (create_breakpoints): Move the
3003 update_global_location_list call to ...
3004 (break_command_really): ... here together with the second local call
3005 both unified after all the cleanups.
3007 2009-04-23 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
3008 Tom Tromey <tromey@redhat.com>
3010 * configure, config.in: Regenerate.
3011 * configure.ac: Support for relocatable GDB datadir. Use
3012 GDB_AC_WITH_DIR. Always define TARGET_SYSTEM_ROOT_RELOCATABLE.
3013 * acinclude.m4 (GDB_AC_WITH_DIR): New defun.
3014 * top.c (init_main): Add "set data-directory".
3015 * defs.h (gdb_datadir): Declare.
3016 * main.c (gdb_datadir): New global.
3017 (captured_main): Initialize gdb_datadir. Use relocate_directory.
3018 (relocate_path): New function.
3019 (relocate_directory): Likewise.
3020 (get_init_files): Use relocate_path.
3021 (README): Mention --with-gdb-datadir.
3023 2009-04-23 Joel Brobecker <brobecker@adacore.com>
3025 * ada-tasks (task_command_1): Call target_find_new_threads.
3027 2009-04-23 Joel Brobecker <brobecker@adacore.com>
3029 * stack.c (do_gdb_disassembly): Print the exception message if an
3030 error was thrown while trying to perform the disassembly.
3032 2009-04-22 Jan Kratochvil <jan.kratochvil@redhat.com>
3034 * varobj.c (free_variable): Replace free_current_contents by xfree.
3036 2009-04-22 Kazu Hirata <kazu@codesourcery.com>
3038 * arm-linux-nat.c (fetch_register, store_register): Use
3039 ARM_CPSR_GREGNUM instead of ARM_CPSR_REGNUM.
3040 * arm-linux-tdep.c (arm_linux_supply_gregset,
3041 arm_linux_collect_gregset): Likewise.
3042 * arm-linux-tdep.h (ARM_CPSR_GREGNUM): New.
3043 * arm-tdep.h (ARM_CPSR_REGNUM): Remove.
3045 2009-04-22 Hui Zhu <teawater@gmail.com>
3047 * stack.c (_initialize_stack): Set the default of
3048 disassemble-next-line to off.
3050 2009-04-21 Tom Tromey <tromey@redhat.com>
3052 * acinclude.m4: Use AS_HELP_STRING, not AC_HELP_STRING.
3053 * configure.ac: Use AS_HELP_STRING, not AC_HELP_STRING.
3055 2009-04-21 Andreas Schwab <schwab@linux-m68k.org>
3057 * configure.ac: Add quotes to not lose brackets in help text.
3058 * configure: Rebuild.
3060 2009-04-21 Andreas Schwab <schwab@linux-m68k.org>
3062 * configure.ac: Don't postprocess Makefile in config.status.
3063 Substitute GDB_NM_FILE. Don't substitute nm_h.
3064 * Makefile.in (GDB_NM_FILE): Substitute.
3065 (TAGS): Use $(GDB_NM_FILE) instead of $(NAT_FILE).
3066 * configure: Regenerate.
3067 * gnulib/Makefile.in: Regenerate.
3069 2009-04-21 Joseph Myers <joseph@codesourcery.com>
3071 * configure.ac (--with-datarootdir, --with-docdir, --with-pdfdir,
3072 --with-htmldir): New.
3073 * configure: Regenerate.
3075 2009-04-21 Tom Tromey <tromey@redhat.com>
3077 * configure: Rebuild.
3078 * configure.ac: Use lower case for start of help strings. Clean
3079 up --with-sysroot help.
3081 2009-04-21 Tom Tromey <tromey@redhat.com>
3083 * configure: Rebuild.
3084 * acinclude.m4 (AM_ICONV): Use AC_HELP_STRING.
3085 * configure.ac: Use AC_HELP_STRING. Use upper case for variables
3088 2009-04-21 Pierre Muller <muller@ics.u-strasbg.fr>
3090 ARI fix: remove "%p".
3091 * ia64-tdep.c (ia64_frame_this_id): Use host_address_to_string function.
3092 (ia64_sigtramp_frame_this_id): Ditto.
3093 (ia64_libunwind_frame_this_id): Ditto.
3094 (ia64_libunwind_sigtramp_frame_this_id): Ditto.
3095 * symmisc.c (maintenance_info_psymtabs): Ditto.
3097 2009-04-21 Joseph Myers <joseph@codesourcery.com>
3099 * configure.ac (--with-relocated-sources): New.
3100 * configure, config.in: Regenerate.
3101 * source.c (add_substitute_path_rule): Remove static.
3102 * source.h (add_substitute_path_rule): Declare.
3103 * main.c: Include "source.h".
3104 (captured_main): Add substitution rule if RELOC_SRCDIR.
3106 2009-04-21 Pierre Muller <muller@ics.u-strasbg.fr>
3108 * gnu-nat.h (proc_debug): Add missing continuation line in macro.
3110 2009-04-20 David Daney <ddaney@caviumnetworks.com>
3112 * NEWS: Mention MIPS/Linux hardware watchpoint support.
3114 2009-04-20 David Daney <ddaney@caviumnetworks.com>
3116 * mips-linux-nat.c (command.h, gdbcmd.h, gdb_assert.h): New #includes.
3117 (maint_show_dr, super_close): New variables.
3118 (super_fetch_registers, super_store_registers): Make static.
3119 (PTRACE_GET_WATCH_REGS, PTRACE_SET_WATCH_REGS, W_BIT, R_BIT, I_BIT)
3120 (W_MASK, R_MASK, I_MASK, IRW_MASK, MAX_DEBUG_REGISTER): Define.
3121 (pt_watch_style): Define new enum.
3122 (mips32_watch_regs, mips64_watch_regs, pt_watch_regs, mips_watchpoint):
3124 (watch_readback_valid, watch_readback, current_watches, watch_mirror):
3126 (get_irw_mask, get_reg_mask, get_num_valid, get_watchlo)
3127 (set_watchlo, get_watchhi, set_watchhi, mips_show_dr)
3128 (mips_linux_read_watch_registers, mips_linux_can_use_hw_breakpoint)
3129 (mips_linux_stopped_by_watchpoint, mips_linux_stopped_data_address)
3130 (type_to_irw, fill_mask, try_one_watch)
3131 (mips_linux_region_ok_for_hw_watchpoint, write_watchpoint_regs)
3132 (mips_linux_new_thread, populate_regs_from_watches)
3133 (mips_linux_insert_watchpoint, mips_linux_remove_watchpoint)
3134 (mips_linux_close): New functions.
3135 (_initialize_mips_linux_nat): Register watchpoint functions with
3136 the target_ops. Add show-debug-regs maintenance command.
3138 2009-04-20 David Daney <ddaney@caviumnetworks.com>
3140 * infrun.c (handle_inferior_event): Move gegisters_changed call down.
3142 2009-04-19 Pedro Alves <pedro@codesourcery.com>
3144 * NEWS: Mention gdbserver support for x86 Windows CE.
3146 2009-04-19 Eli Zaretskii <eliz@gnu.org>
3148 * config/djgpp/fnchange.lst: Fix typos.
3150 Set default host and target charsets in the DJGPP port.
3152 * config/djgpp/config.sed (am_cv_langinfo_codeset)
3153 (bash_cv_langinfo_codeset, ac_cv_header_nl_types_h): Set to "yes"
3154 in all configure scripts that define ac_cv_env_CPP_value.
3156 * go32-nat.c (dos_codepage, nl_langinfo): New functions.
3159 * config/djgpp/nl_types.h: New file.
3161 * config/djgpp/langinfo.h: New file.
3163 * config/i386/go32.mh (MH_CFLAGS): Add $(srcdir)/config/djgpp.
3165 2009-04-18 Carlos O'Donell <carlos@codesourcery.com>
3167 * Makefile.in (MAKEHTML): Set to makeinfo --html.
3168 (MAKEHTMLFLAGS): Set to empty.
3170 2009-04-18 Eli Zaretskii <eliz@gnu.org>
3172 * NEWS: Mention all new set/show commands added since GDB 6.8 was
3175 * go32-nat.c (go32_sysinfo): Check if the call to
3176 __dpmi_get_capabilities fills the buffer with information, and
3177 don't use the buffer if not.
3179 2009-04-17 Tom Tromey <tromey@redhat.com>
3181 * charset.c (_initialize_charset): Add special case for "646".
3183 2009-04-17 Carlos O'Donell <carlos@codesourcery.com>
3185 * configure.ac: AC_SUBST datarootdir, docdir, htmldir, pdfdir.
3186 * configure: Regenerate.
3187 * Makefile.in: Set datarootdir, docdir, htmldir, and pdfdir from
3188 configure substitutions.
3189 (FLAGS_TO_PASS): Add datarootdir, docdir, and htmldir.
3191 2009-04-17 Pierre Muller <muller@ics.u-strasbg.fr>
3193 ARI fix: Do not use %p, replace by call to host_address_to_string
3195 * darwin-nat.c (darwin_xfer_partial): Apply change.
3196 * gnu-nat.c (inf_continue, gnu_xfer_memory): Ditto.
3197 * gnu-nat.h (proc_debug): Ditto.
3198 * symmisc.c (maintenance_info_symtabs): Ditto.
3199 (maintenance_info_psymtabs): Ditto.
3200 * windows-nat.c (handle_load_dll): Ditto.
3201 (handle_unload_dll, info_w32_command, handle_exception): Ditto.
3202 * xtensa-tdep.c (xtensa_unwind_pc): Ditto.
3204 2009-04-17 Joseph Myers <joseph@codesourcery.com>
3206 * configure.tgt (i[34567]86-*-linux*): Use 64-bit configuration if
3207 --enable-64-bit-bfd.
3208 (sparc-*-linux*): Likewise.
3210 2009-04-17 Eli Zaretskii <eliz@gnu.org>
3212 * go32-nat.c (go32_sysinfo): Update list of Windows versions of
3215 2009-04-16 Pedro Alves <pedro@codesourcery.com>
3217 * remote.c (remote_query_attached): Fix pasto in packet_ok result
3220 2009-04-16 Joel Brobecker <brobecker@adacore.com>
3222 * procfs.c (solib_mappings_callback, find_memory_regions_callback):
3223 Revert the previous change. Might not be correct, actually.
3225 2009-04-16 Joel Brobecker <brobecker@adacore.com>
3227 * ada-lang.h (ada_adjust_exception_stop, ada_print_exception_stop)
3228 (ada_get_current_task, ada_print_exception_breakpoint_nontask)
3229 (ada_print_exception_breakpoint_task, ada_reset_thread_registers):
3230 Remove declaration. These are non-existent functions.
3232 2009-04-16 Joel Brobecker <brobecker@adacore.com>
3234 * procfs.c (solib_mappings_callback, find_memory_regions_callback):
3235 Fix a compilation warning on mips-irix due to casting from
3236 a pointer of different size.
3238 2009-04-16 Joel Brobecker <brobecker@adacore.com>
3240 * ada-lang.c (symtab_for_sym): Delete.
3241 (user_select_syms): Use sym->symtab instead of calling symtab_for_sym.
3243 2009-04-16 Joel Brobecker <brobecker@adacore.com>
3245 * ada-lang.c (extract_string): Delete.
3246 (ada_main_name): Reimplement using target_read_string instead of
3249 2009-04-16 Andreas Schwab <schwab@linux-m68k.org>
3251 * m68klinux-nat.c: Remove obsolete comment.
3252 (fetch_register, store_register): Don't call
3253 gdbarch_cannot_fetch_register or gdbarch_cannot_store_register,
3254 which are always nops here.
3256 2009-04-14 Tom Tromey <tromey@redhat.com>
3258 * c-lang.c (c_emit_char): Use INTERMEDIATE_ENCODING.
3259 (c_printstr): Likewise.
3260 * charset.c: Include gdb_wait.h.
3261 (make_wchar_iterator): Use INTERMEDIATE_ENCODING.
3262 (find_charset_names): Use pexecute. Handle libiconv's output.
3264 (_initialize_charset): Use xstrdup.
3265 * gdb_wchar.h: Check HAVE_BTOWC. Split PHONY_ICONV and wchar
3267 (INTERMEDIATE_ENCODING): New define.
3268 * configure, config.in: Rebuild.
3269 * configure.ac: Check for btowc.
3271 2009-04-15 Tom Tromey <tromey@redhat.com>
3273 * c-lang.c (evaluate_subexp_c): Correctly handle EVAL_SKIP.
3275 2009-04-15 Eli Zaretskii <eliz@gnu.org>
3277 * utils.c (parse_escape): Initialize target_char to pacify GCC.
3279 2009-04-14 Jan Kratochvil <jan.kratochvil@redhat.com>
3281 * c-lang.c (c_get_string): Fix xfree crash on a failed string read.
3283 2009-04-14 Pierre Muller <muller@ics.u-strasbg.fr>
3285 ARI fix: sprintf rule.
3286 * ada-exp.y (convert_char_literal): Replace sprintf by xsnprintf.
3287 * ada-lang.c (add_angle_brackets): Use xstrprintf.
3288 (ada_decode): Replace sprintf by xsnprintf.
3289 (find_old_style_renaming_symbol): Ditto.
3290 (ada_to_fixed_type_1, ada_enum_name): Ditto.
3293 2009-04-14 Joel Brobecker <brobecker@adacore.com>
3295 * target.c (target_mourn_inferior): Call bfd_cache_close_all
3296 after having executed the target mourn_inferior routine.
3298 2009-04-14 Eli Zaretskii <eliz@gnu.org>
3300 * config/djgpp/djconfig.sh (DEPDIR): Define to "_deps", if
3303 2009-04-13 David Daney <ddaney@caviumnetworks.com>
3305 * infrun.c (maybe_software_singlestep): New function.
3306 (resume): Call maybe_software_singlestep.
3307 (handle_inferior_event): Same.
3309 2009-04-13 Tom Tromey <tromey@redhat.com>
3311 * python/python-frame.c (frapy_richcompare): Return
3312 Py_NotImplemented, not an error. Handle Py_NE as well.
3314 2009-04-13 Eli Zaretskii <eliz@gnu.org>
3316 * charset.c (EILSEQ): Define if not defined by system headers.
3318 2009-04-11 Eli Zaretskii <eliz@gnu.org>
3320 * config/djgpp/config.sed: Tweak ac_config_files in intl/configure
3321 to be consistent with renaming config.intl.in into config_intl.in.
3323 * go32-nat.c (go32_attach, go32_detach): Fix prototypes to be
3324 consistent with the change from 2008-11-09.
3326 2009-04-10 Jan Kratochvil <jan.kratochvil@redhat.com>
3328 * gdbtypes.c: Remove excessive parentheses at the return keywords.
3329 * varobj.c (varobj_invalidate): Fix indentation.
3330 * varobj.c (varobj_invalidate): Fix formatting text width.
3332 2009-04-08 Vladimir Prus <vladimir@codesourcery.com>
3334 Implement -exec-jump.
3336 * mi/mi-cmds.h (mi_cmd_exec_jump): Declare.
3337 * mi/mi-main.c (mi_cmd_exec_jump): New.
3338 * mi/mi-cmds.c (mi_cmds): Register exec-jump.
3340 2009-04-07 Doug Evans <dje@google.com>
3342 * symfile.c (symbol_file_clear): Fix indentation.
3344 2009-04-06 Mark Kettenis <kettenis@gnu.org>
3346 * sparc64nbsd-nat.c (sparc64nbsd_supply_pcb): Fix comment.
3348 2009-04-03 Ulrich Weigand <uweigand@de.ibm.com>
3350 * ppc-linux-nat.c (ppc_linux_target_wordsize): New function.
3351 (ppc_linux_auxv_parse): New function.
3352 (ppc_linux_read_description): Use ppc_linux_target_wordsize.
3353 (_initialize_ppc_linux_nat): Install ppc_linux_auxv_parse.
3355 2009-04-03 Ulrich Weigand <uweigand@de.ibm.com>
3357 * spu-linux-nat.c (spu_bfd_open): Set filename of in-memory
3358 BFD to contents of SPU name note.
3359 (spu_symbol_file_add_from_memory): Call symbol_file_add_from_bfd
3360 with "from_tty" argument 1 instead of 0.
3362 2009-04-02 Jan Kratochvil <jan.kratochvil@redhat.com>
3365 (new_symbol <DW_TAG_variable> <!DW_AT_location> <DW_AT_external>):
3366 Create the symbol in local scope.
3367 * symtab.h (cu->list_in_scope <LOC_UNRESOLVED>): New comment part.
3369 2009-04-02 Keith Seitz <keiths@redhat.com>
3371 * stabsread.c (read_member_functions): GCC may emit an extra space
3372 at the end of the names "__base_ctor" and "__base_dtor"; so ignore
3373 whitespace when looking for these functions.
3375 2009-04-01 Joel Brobecker <brobecker@adacore.com>
3377 Change the default value for "set print frame-arguments" to scalars.
3379 * stack.c (print_frame_arguments): Set initial value to "scalars".
3381 2009-04-01 Aleksandar Ristovski <aristovski@qnx.com>
3383 * mips-tdep.c (mips_numeric_register_alieses): New definition.
3384 (mips_gdbarch_init): Add user registers from
3385 mips_numeric_register_aliases.
3387 2009-04-01 Joel Brobecker <brobecker@adacore.com>
3389 * linux-nat.c (linux_nat_filter_event): Minor comment reformatting.
3391 2009-04-01 Joel Brobecker <brobecker@adacore.com>
3393 * linux-nat.c (linux_nat_filter_events): Do not delete the lwp if
3394 this is the last one.
3396 2009-04-01 Pedro Alves <pedro@codesourcery.com>
3398 * remote.c (append_resumption): New.
3399 (remote_vcont_resume): Use it.
3401 2009-04-01 Joel Brobecker <brobecker@adacore.com>
3403 * windows-nat.c (+windows_get_ada_task_ptid): New function.
3404 (init_windows_ops): Set windows_ops.to_get_ada_task_ptid.
3406 2009-03-31 Daniel Jacobowitz <dan@codesourcery.com>
3407 Keith Seitz <keiths@redhat.com>
3408 Jan Kratochvil <jan.kratochvil@redhat.com>
3411 * Makefile.in (dbxread.o): Update.
3412 * dbxread.c (read_dbx_symtab): Use cp_canonicalize_string.
3413 * dwarf2read.c (GDB_FORM_cached_string): New.
3414 (read_partial_die): Use dwarf2_canonicalize_name.
3415 (dwarf2_linkage_name): Use dwarf2_name.
3416 (dwarf2_canonicalize_name): New.
3417 (dwarf2_name): Use dwarf2_canonicalize_name.
3418 (dwarf_form_name, dump_die): Handle GDB_FORM_cached_string.
3419 * stabsread.c (define_symbol, read_type): Use cp_canonicalize_string.
3420 * symtab.c (lookup_symbol_in_language): Canonicalize input before
3422 * cp-name-parser.y: operator() requires two parameters,
3423 according to libiberty.
3424 * minsyms.c (lookup_minimal_symbol): Canonicalize input
3428 2009-03-31 Joel Brobecker <brobecker@adacore.com>
3430 Provide support for (Ada) task-specific breakpoints.
3432 * ada-lang.h (ada_get_task_number): Add declaration.
3433 (breakpoint_ada_task_match): Delete declaration.
3434 * ada-tasks.c (ada_get_task_number): Make non-static.
3435 * breakpoint.h (struct breakpoint): Add field "task".
3436 * breakpoint.c (print_one_breakpoint_location): Add handling of
3437 task-specific breakpoints.
3438 (create_breakpoint, create_breakpoints, find_condition_and_thread):
3439 New parameter "task".
3440 (break_command_really): Update calls to find_condition_and_thread
3441 and create_breakpoints.
3442 (breakpoint_re_set_one): Update call to find_condition_and_thread.
3445 2009-03-31 Joel Brobecker <brobecker@adacore.com>
3447 * ada-tasks.c (short_task_info): Eliminate the "Running" task state.
3449 2009-03-31 Pedro Alves <pedro@codesourcery.com>
3451 * remote.c (remote_notice_new_inferior): Use ptid_is_pid. Check
3452 if the thread's ptid without a thread id field is in the list
3453 before calling thread_change_ptid.
3454 (extended_remote_attach_1): In non-stop mode, do not rely on
3455 querying the current thread, instead, query the thread list, and
3456 select the first thread of the process.
3457 * gdbthread.h (first_thread_of_process): Declare.
3458 * thread.c (first_thread_of_process): Define.
3460 2009-03-30 Stan Shebs <stan@codesourcery.com>
3462 Make tracepoints into a type of breakpoint.
3463 * breakpoint.h (enum bptype): Add bp_tracepoint.
3464 (struct breakpoint): Add fields step_count, pass_count, actions.
3465 (get_tracepoint, get_tracepoint_by_number): Declare.
3466 (all_tracepoints): Declare.
3467 * breakpoint.c: Include tracepoint.h, readline.h.
3468 (ALL_TRACEPOINTS): Move here from tracepoint.c.
3469 (tracepoint_count): Ditto.
3470 (should_be_inserted): GDB does not insert tracepoints itself.
3471 (print_it_typical): Add tracepoint case.
3472 (bpstat_what): Ditto.
3473 (print_one_breakpoint_location): Ditto, and add printing for
3474 pass count, step count, and action list.
3475 (user_settable_breakpoint): Add tracepoint case.
3476 (allocate_bp_location): Ditto.
3477 (set_breakpoint_location_function): Ditto.
3478 (disable_breakpoints_in_shlibs): Ditto.
3480 (break_command_really): Add argument traceflag, use to choose
3481 basic breakpoint type.
3482 (break_command_1): Pass extra argument.
3483 (set_breakpoint, handle_gnu_v3_exceptions): Ditto.
3484 (breakpoint_re_set_one): Add tracepoint case.
3485 (disable_command, enable_command): Ditto.
3486 (set_tracepoint_count): Move here from tracepoint.c.
3487 (trace_command): Move here from tracepoint.c and use
3488 break_command_really.
3489 (tracepoints_info): Move here from tracepoint.c and call
3491 (enable_trace_command): Move here from tracepoint.c and call
3493 (disable_trace_command): Move here from tracepoint.c and call
3495 (delete_trace_command): Move here from tracepoint.c and call
3497 (trace_pass_command): Move here from tracepoint.c.
3498 (get_tracepoint_by_number): Ditto.
3499 (tracepoint_save_command): Ditto.
3500 (get_tracepoint): New function.
3501 (all_tracepoints): New function.
3502 (_initialize_breakpoint): Move tracepoint init from tracepoint.c,
3503 deprecate "enable trace" and "disable trace" commands.
3504 * tracepoint.h (struct tracepoint): Remove.
3505 (tracepoint_chain): Remove decl.
3506 (deprecated_create_tracepoint_hook): Remove decl.
3507 (deprecated_delete_tracepoint_hook): Remove decl.
3508 (deprecated_modify_tracepoint_hook): Remove decl.
3509 (ALL_TRACEPOINTS, ALL_TRACEPOINTS_SAFE): Remove.
3510 (free_actions): Update signature.
3511 (validate_actionline): Update signature.
3512 (end_actions_pseudocommand): Declare.
3513 (while_stepping_pseudocommand): Declare.
3514 * tracepoint.c: Include breakpoint.h.
3515 (tracepoint_chain, tracepoint_count): Remove.
3516 (free_actions, make_cleanup_free_actions): Update signature.
3517 (trace_command, set_raw_tracepoint): Remove.
3518 (trace_mention): Remove.
3519 (tracepoints_info): Remove.
3520 (tracepoint_operation, map_args_over_tracepoints): Remove.
3521 (get_tracepoint_by_number): Remove.
3522 (enable_trace_command, disable_trace_command): Remove.
3523 (delete_trace_command, trace_pass_command): Remove.
3524 (trace_actions_command, read_actions): Update signature.
3525 (validate_actionline): Update signature, use bp loc.
3526 (encode_actions): Ditto.
3527 (download_tracepoint): New function, body of trace_start_command.
3528 (trace_start_command): Call it, use all_tracepoints.
3529 (tracepoint_save_command): Remove.
3530 (tracepoint_dump_command): Use get_tracepoint.
3531 (end_actions_pseudocommand): Make globally visible.
3532 (while_stepping_pseudocommand): Ditto.
3533 (_initialize_tracepoint): Move command definitions to breakpoint.c.
3535 2009-03-30 Thiago Jung Bauermann <bauerman@br.ibm.com>
3537 Expose frames to Python.
3538 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-frame.o.
3539 (SUBDIR_PYTHON_SRCS): Add python-frame.c.
3540 (python-frame.o): New target.
3541 * python/python-frame.c: New file.
3542 * python/python-internal.h (gdbpy_frames, gdbpy_newest_frame,
3543 gdbpy_frame_stop_reason_string, gdbpy_selected_frame,
3544 gdbpy_initialize_frames): New prototypes.
3545 * python/python.c (_initialize_python): Call gdbpy_initialize_frames.
3546 (GdbMethods): Add `selected_frame' and `frame_stop_reason_string'
3548 * stack.c (find_frame_funname): New function, factored out of
3550 (print_frame): Call find_frame_funname.
3551 * stack.h (find_frame_funname): Add prototype.
3553 2009-03-29 Thiago Jung Bauermann <bauerman@br.ibm.com>
3555 Remove unused value_object attribute `owned_by_gdb'.
3556 * python/python-value.c (value_object): Remove owned_by_gdb
3558 (valpy_dealloc): Remove reference to self->owned_by_gdb.
3559 (valpy_new): Likewise.
3560 (value_to_value_object): Likewise.
3562 2009-03-29 Thiago Jung Bauermann <bauerman@br.ibm.com>
3564 Change gdb.Value.address from a method to an attribute.
3565 * python/python-value.c (value_object): Add `address' element.
3566 (valpy_dealloc): Decrement reference to self->address if set.
3567 (valpy_new): Initialize val_obj->address.
3568 (valpy_address): Rename to ...
3569 (valpy_get_address): ... this. Change signature from method to
3570 attribute. Update self->address if not set.
3571 (value_to_value_object): Initialize val_obj->address.
3572 (value_object_getset): Add `address' element.
3573 (value_object_methods): Remove `address' element.
3575 2009-03-29 Andreas Schwab <schwab@linux-m68k.org>
3577 * observer.sh: Set LANG/LC_ALL to C, not c.
3579 2009-03-28 Kevin Buettner <kevinb@redhat.com>
3581 * mn10300-tdep.c (mn10300_gdbarch_init): For mn10300, by default,
3584 2009-03-28 Pedro Alves <pedro@codesourcery.com>
3586 * remote.c (remote_stop_ns): If multi-process extensions are off,
3587 and GDB is requesting the whole process to stop, sent "vCont;t",
3590 2009-03-28 Pedro Alves <pedro@codesourcery.com>
3592 * inf-loop.c (inferior_event_handler): Avoid calling is_running on
3595 2009-03-27 Eli Zaretskii <eliz@gnu.org>
3597 * config/djgpp/fnchange.lst: Update to fix ARI-reported problems.
3599 2009-03-26 Doug Evans <dje@google.com>
3601 * thread.c (do_restore_current_thread_cleanup): Redo test for
3602 whether to restore old->inferior_ptid.
3604 2009-03-26 Tom Tromey <tromey@redhat.com>
3606 * breakpoint.c (resolve_sal_pc): Preserve original line number
3607 when skipping prologue.
3609 2009-03-26 Doug Evans <dje@google.com>
3611 * thread.c (inferior_thread) Remove "extern" in definition.
3613 2009-03-26 Thiago Jung Bauermann <bauerman@br.ibm.com>
3615 Add gdb.Value.is_optimized_out attribute.
3616 * python/python-value.c (valpy_get_is_optimized_out): New
3618 (value_object_getset): New variable.
3619 (value_object_type): Initialize tp_getset element.
3621 2009-03-26 Joel Brobecker <brobecker@adacore.com>
3623 Recognize missing DW_AT_location as <value optimized out>.
3625 (new_symbol <DW_TAG_variable> <!DW_AT_location> <!DW_AT_external>):
3626 Call add_symbol_to_list.
3628 2009-03-25 Tom Tromey <tromey@redhat.com>
3630 * gdbtypes.h (CHECK_TYPEDEF): Don't yield a value.
3631 * stack.c (print_this_frame_argument_p): Use check_typedef.
3633 2009-03-25 Tom Tromey <tromey@redhat.com>
3635 * configure: Rebuild.
3636 * acinclude.m4 (AM_ICONV): Set am_cv_use_build_libiconv.
3637 Rearrange flags setting. Add comments.
3639 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
3641 * config/i386/nm-i386.h: Remove code within
3642 I386_WATCHPOINTS_IN_TARGET_VECTOR conditional.
3643 * config/i386/nm-cygwin.h: Remove I386_WATCHPOINTS_IN_TARGET_VECTOR
3645 * config/i386/nm-cygwin64.h: Ditto.
3646 * config/i386/nm-fbsd.h: Ditto.
3647 * config/i386/nm-go32.h: Ditto.
3648 * config/i386/nm-linux.h: Ditto.
3649 * config/i386/nm-linux64.h: Ditto.
3651 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
3653 ARI fix: "xasprintf" rule.
3654 * printcmd.c (sym_info): Replace xasprintf by xstrprintf.
3656 2009-03-25 Pedro Alves <pedro@codesourcery.com>
3658 * remote.c (remote_start_remote): In non-stop mode, call
3659 init_wait_for_inferior before adding threads and inferiors.
3661 2009-03-25 Joel Brobecker <brobecker@adacore.com>
3663 * breakpoint.c (breakpoint_thread_match): Split a large condition
3664 into several smaller conditions. No behavior change.
3666 2009-03-25 Pedro Alves <pedro@codesourcery.com>
3668 * infrun.c (infrun_thread_thread_exit): New.
3669 (_initialize_infrun): Attach it to the thread_exit observer.
3670 * thread.c (delete_thread_1): Always call the observer, passing it
3672 * mi/mi-interp.c (mi_thread_exit): Add "silent" parameter. If
3673 SILENT, return immediately.
3675 2009-03-25 Pedro Alves <pedro@codesourcery.com>
3677 * infrun.c (normal_stop): Use has_stack_frames instead of
3679 * mi/mi-main.c (mi_execute_command): Avoid calling inferior_thread
3680 when there is no thread selected.
3681 (mi_cmd_execute): Don't special case commands that can run without
3682 a valid selected thread.
3683 * top.c (execute_command): Don't special case commands that can
3684 run without a valid selected thread. Use has_stack_frames.
3685 * infcmd.c (ensure_valid_thread): New.
3686 (continue_1, step_1, jump_command, signal_command): Use it.
3687 (detach_command): Error out if there's no selected thread/inferior.
3688 * thread.c (print_thread_info): Allow having no thread selected.
3689 (switch_to_thread): Don't read the PC if there is no current thread.
3690 (do_restore_current_thread_cleanup): Don't record the current
3691 frame if there is no current thread.
3692 (make_cleanup_restore_current_thread): Don't read frame info if
3693 there is no selected thread.
3694 (_initialize_thread): Don't mark commands as
3695 "no_selected_thread_ok".
3696 * frame.c (get_current_frame): Error out if there is no valid
3698 (has_stack_frames): Return false if there is no valid
3700 * cli/cli-cmds.c (init_cli_cmds): Don't mark commands as
3701 "no_selected_thread_ok".
3702 * cli/cli-decode.c (set_cmd_no_selected_thread_ok)
3703 (get_cmd_no_selected_thread_ok): Delete.
3704 * cli/cli-decode.h (CMD_NO_SELECTED_THREAD_OK): Delete.
3705 (set_cmd_no_selected_thread_ok, get_cmd_no_selected_thread_ok):
3707 * stack.c (get_selected_block): Use has_stack_frames.
3709 2009-03-25 Thiago Jung Bauermann <bauerman@br.ibm.com>
3711 Fix size of FPSCR in Power 7 processors.
3712 * ppc-linux-nat.c (PPC_FEATURE_ARCH_2_05): Remove #define.
3713 (PPC_FEATURE_HAS_DFP): New #define.
3714 (ppc_linux_read_description): Check for DFP feature instead of
3715 ISA 2.05 to decide on size of the FPSCR.
3717 2009-03-25 Kevin Buettner <kevinb@redhat.com>
3719 * mn10300-tdep.c (trad-frame.h): Don't include.
3720 (prologue-value.h): Include.
3721 (mn10300_frame_unwind_cache, set_reg_offsets): Delete.
3722 (struct mn10300_prologue): Define.
3723 (push_reg, translate_rreg, check_for_saved): New functions.
3724 (mn10300_analyze_prologue): Rewrite, using prologue-value
3725 machinery. Handle more instructions than before. Permit
3726 instructions to occur in any order.
3727 (mn10300_skip_prologue): Find the extents of the function
3728 in question; mn10300_analyze_prologue no longer does this.
3729 (mn10300_analyze_frame_prologue): New function.
3730 (mn10300_frame_base): New function.
3731 (mn10300_frame_this_id): Rewrite, no longer using trad-frame
3733 (mn10300_frame_prev_register): Likewise.
3734 (mn10300_frame_base_address, mn10300_frame_base struct): Delete.
3735 (mn10300_unwind_pc, mn10300_unwind_sp): Rename `next_frame' to
3737 (mn10300_frame_unwind_init): Don't call frame_base_set_default().
3739 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
3741 Fix completer problem for filename completion on the first try.
3743 * gdb/completer.h (gdb_completion_word_break_characters): New function.
3744 * gdb/completer.c: Include gdb_assert.h.
3745 (complete_line_internal_reason): New enum.
3746 (complete_line_internal): Change last argument type to
3747 complete_line_internal_reason.
3748 Modify function to handle the different complete_line_internal_reason
3750 (complete_line): Adapt to change in complete_line_internal.
3751 (command_completer): Ditto.
3752 (gdb_completion_word_break_characters): Implement new function.
3753 * top.c (init_main): Set rl_completion_word_break_hook to
3754 gdb_completion_word_break_characters.
3757 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
3759 ARI fix: "strlen d_name" rule.
3760 * linux-nat.c (linux_nat_xfer_osdata): Use NAMELEN macro.
3763 2009-03-24 Tom Tromey <tromey@redhat.com>
3764 Pedro Alves <pedro@codesourcery.com>
3766 * configure, config.in: Rebuild.
3767 * configure.ac: Check for libiconvlist.
3768 * charset.c: Check HAVE_LIBICONVLIST.
3769 * acinclude.m4 (AM_ICONV): Don't subst LIBICONV, LIBICONV_INCLUDE,
3770 LIBICONV_LIBDIR. Update CPPFLAGS and LIBS.
3771 * Makefile.in (LIBICONV, LIBICONV_INCLUDE, LIBICONV_LIBDIR):
3773 (INTERNAL_CFLAGS_BASE): Update.
3774 (INTERNAL_LDFLAGS): Update.
3777 2009-03-24 Jan Kratochvil <jan.kratochvil@redhat.com>
3779 * configure.ac: Initialize the variable $PREFER_CURSES.
3780 * configure: Regenerated.
3782 2009-03-24 Jan Kratochvil <jan.kratochvil@redhat.com>
3784 * configure.ac: Enable $PREFER_CURSES even with default $ENABLE_TUI.
3785 * configure: Regenerated.
3787 2009-03-24 Pierre Muller <muller@ics.u-strasbg.fr>
3789 ARI fix: "strerror" rule.
3790 * darwin-nat.c (darwin_ptrace): Use safe_strerror.
3791 (darwin_stop_inferior, darwin_attach, darwin_detach): Ditto.
3793 2009-03-23 Joel Brobecker <brobecker@adacore.com>
3795 * ada-exp.y (get_symbol_field_type): Make sure to resolve typedefs
3796 before looking up the fields inside our struct type.
3798 2009-03-23 Joel Brobecker <brobecker@adacore.com>
3800 * ada-lang.c (resolve_subexp) [UNOP_QUAL]: Resolve typedefs before
3801 trying to resolve the type qualification.
3803 2009-03-23 Joel Brobecker <brobecker@adacore.com>
3805 * ada-lang.c (ada_evaluate_subexp) [UNOP_IN_RANGE]: make sure
3806 we try to apply the attribute on the real type, rather than
3807 its associated typedef.
3809 2009-03-23 Joel Brobecker <brobecker@adacore.com>
3811 * ada-lang.c (ada_evaluate_subexp) [OP_ATR_MODULUS]: Use check_typdef
3812 to make sure we try to get the modulus of the actual type, not the
3815 2009-03-23 Joel Brobecker <brobecker@adacore.com>
3817 * ada-lang.c (ada_evaluate_subexp): [OP_ATR_FIRST, OP_ATR_LAST]
3818 [OP_ATR_LENGTH]: When using the attribute on a type, make sure
3819 to get the real type, not the associated typedef.
3821 2009-03-23 Joel Brobecker <brobecker@adacore.com>
3823 * ada-lang.c (ada_get_field_index): Add handling of the case
3824 when TYPE is a typedef of a struct.
3826 2009-03-23 Joel Brobecker <brobecker@adacore.com>
3828 Add gdb_usleep as a portable version of usleep based on gdb_select.
3829 * gdb_usleep.h, gdb_usleep.c: New files.
3830 * Makefile.in (SFILES): Add gdb_usleep.c.
3831 (HFILES_NO_SRCDIR): Add gdb_usleep.h.
3832 (COMMON_OBS): Add gdb_usleep.o.
3833 * ser-unix.c (hardwire_send_break): Replace call to gdb_select
3834 by call to gdb_usleep.
3836 2009-03-23 Joel Brobecker <brobecker@adacore.com>
3838 * buildsym.c (end_symtab): If we ignore the subfiles, then
3839 unlink the associated symtabs if they were already allocated.
3841 2009-03-23 Jerome Guitton <guitton@adacore.com>
3843 Provide a way to force building of GDB with libcurses.
3844 * configure.ac: Add --with-curses.
3845 * configure: Regenerated.
3847 2009-03-23 Tom Tromey <tromey@redhat.com>
3849 * dwarf2expr.c (execute_stack_op) <DW_OP_GNU_uninit>: Fix typo in
3852 2009-03-23 Paul Pluzhnikov <ppluzhnikov@google.com>
3854 * breakpoint.c (disable_breakpoints_in_unloaded_shlib): Use
3855 solib_contains_address_p instead of searching.
3857 2009-03-23 Tom Tromey <tromey@redhat.com>
3859 * charset.c (ICONV_CONST) <PHONY_ICONV>: Define.
3860 (iconv): Make 'inbuf' argument const.
3861 (convert_between_encodings): Use ICONV_CONST.
3862 (wchar_iterate): Likewise.
3864 2009-03-22 Christopher Faylor <me+cygwin@cgf.cx>
3866 * windows-nat.c (AdjustTokenPrivileges): Implement macro wraparound for
3867 dynamically loaded function.
3868 (LookupPrivilegeValueA): Ditto.
3869 (OpenProcessToken): Ditto.
3870 (AdjustTokenPrivileges): Rename and define placeholder for address of
3871 dynamically loaded function.
3872 (LookupPrivilegeValueA): Ditto.
3873 (OpenProcessToken): Ditto.
3874 (set_process_privilege): Remove check for loaded functions.
3875 (bad_OpenProcessToken): Define.
3876 (_initialize_loadable): Load token functions from advapi here, setting
3877 OpenProcessToken function to a dummy static function which always return
3878 error if OS doesn't support this functionality.
3880 2009-03-22 Nicolas Roche <roche@adacore.com>
3881 Christopher Faylor <me+cygwin@cgf.cx>
3883 * win32-nat.c (ctrl_c_handler): New function.
3884 (win32_wait): Register ctrl_c_handler as Ctrl-C handler if the inferior
3885 is run in a separate console.
3887 2009-03-22 Christopher Faylor <me+cygwin@cgf.cx>
3889 * windows-nat.c (DebugActiveProcessStop): Implement macro wraparound
3890 for dynamically loaded function.
3891 (DebugBreakProcess): Ditto.
3892 (DebugSetProcessKillOnExit): Ditto.
3893 (EnumProcessModules): Ditto.
3894 (GetModuleFileNameExA): Ditto.
3895 (GetModuleInformation): Ditto.
3896 (DebugActiveProcessStop): Rename and define placeholder for address of
3897 dynamically loaded function.
3898 (DebugBreakProcess): Ditto.
3899 (DebugSetProcessKillOnExit): Ditto.
3900 (EnumProcessModules): Ditto.
3901 (GetModuleFileNameExA): Ditto.
3902 (GetModuleInformation): Ditto.
3903 (psapi_loaded): Delete.
3904 (get_module_name): Don't check psapi_loaded, just rely on the fact that
3905 dynamically loaded functions will return failure if they weren't
3907 (has_detach_ability): Delete.
3908 (windows_attach): Remove call to has_detach_ability (). Just rely on
3909 functions being callable.
3910 (bad_DebugActiveProcessStop): Define.
3911 (bad_DebugBreakProcess): Ditto.
3912 (bad_DebugSetProcessKillOnExit): Ditto.
3913 (bad_EnumProcessModules): Ditto.
3914 (bad_GetModuleFileNameExA): Ditto.
3915 (bad_GetModuleInformation): Ditto.
3916 (_initialize_loadable): Rename from _initialize_psapi. Initialize all
3917 dynamic storage here, setting nonexistent functions to dummy static
3918 functions which always return error.
3920 2009-03-22 Pedro Alves <pedro@codesourcery.com>
3922 * mi/mi-interp.c (mi_interpreter_init): Attach mi_about_to_proceed
3923 to the about_to_proceed observer notification.
3924 (mi_about_to_proceed): New.
3925 (mi_on_resume): Only output ^running and the prompt here if the
3926 target was proceeded.
3927 * breakpoint.c (breakpoint_proceeded): New static.
3928 (breakpoint_about_to_proceed): New.
3929 (_initialize_breakpoints): Attach breakpoint_about_to_proceed to
3930 the about_to_proceed observer notification.
3931 * inferior.h (breakpoint_proceeded): Delete declaration.
3932 * infrun.c (clear_proceed_status): Don't set breakpoint_proceeded.
3933 Notify the about_to_proceed observers.
3934 (struct inferior_status): Delete breakpoint_proceeded member.
3935 (save_inferior_status): Don't save it.
3936 (restore_inferior_status): Don't restore it.
3937 * mi-main.h (mi_proceeded): Declare.
3938 * mi/mi-main.c (mi_cmd_execute): Clear mi_proceeded before running
3941 2009-03-22 Pedro Alves <pedro@codesourcery.com>
3943 * gdbthread.h (struct thread_info): Add in_infcall member.
3944 * infcall.c (run_inferior_call): Save, set and restore in_infcall.
3945 Remove reverences to suppress_resume_observer. Refresh
3946 `call_thread' after returning from `proceed'.
3947 * infcmd.c (suppress_resume_observer): Delete.
3948 * inferior.h (suppress_resume_observer): Delete declaration.
3949 * mi/mi-interp.c (mi_on_resume): Suppress output while calling an
3951 * thread.c (set_running): Remove references to
3952 suppress_resume_observer.
3953 * infrun.c (struct inferior_status): Add in_infcall member.
3954 (save_inferior_status): Save it.
3955 (restore_inferior_status): Restore it.
3957 2009-03-22 Pedro Alves <pedro@codesourcery.com>
3959 * infcall.c (run_inferior_call): Remove references to
3960 suppress_stop_observer.
3961 * infcmd.c (suppress_stop_observer): Delete.
3962 (finish_command_continuation): Remove NOTE. Don't clear
3963 suppress_stop_observer anymore.
3964 (finish_command_continuation_free_arg): Likewise.
3965 (finish_forward): Remove references to suppress_stop_observer.
3966 Call normal_stop observer if we haven't already.
3967 * inferior.h (suppress_stop_observer): Delete.
3968 * infrun.c (normal_stop): When deciding to suppress the
3969 normal_stop observer, check for proceed_to_finish instead of
3970 suppress_stop_observer.
3972 2009-03-22 Pedro Alves <pedro@codesourcery.com>
3974 * symfile.c (symfile_relocate_debug_section): Remove check for
3977 2009-03-21 Jan Kratochvil <jan.kratochvil@redhat.com>
3978 Jim Blandy <jimb@red-bean.com>
3979 Thiago Jung Bauermann <bauerman@br.ibm.com>
3980 Tom Tromey <tromey@redhat.com>
3982 Miscellaneous fixes to the Python code.
3983 * python/python-cmd.c (cmdpy_init): Accept keyword
3985 * python/python-value.c (valpy_string): Accept keyword
3987 (valpy_binop): Use `break' to exit from the TRY_CATCH block.
3988 Do not call value_to_value_object on NULL RES_VAL.
3989 (value_object_methods): Change `string' entry to also accept
3991 (convert_value_from_python): Return a copy of the value if obj is
3993 (value_object_methods): Mark the `string' method as accepting
3994 keywords, and show method "prototype" in the doc string.
3995 * python/python.c (get_parameter): Don't return inside a
3998 2009-03-20 Tom Tromey <tromey@redhat.com>
4000 Add support for convenience functions in Python.
4001 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-function.o.
4002 (SUBDIR_PYTHON_SRCS): Add python-function.c.
4003 (python-function.o): New target.
4004 * eval.c: Include "python/python.h" and <ctype.h>.
4005 (evaluate_subexp_standard): Handle values of type
4006 TYPE_CODE_INTERNAL_FUNCTION.
4007 * gdbtypes.h (type_code): Add TYPE_CODE_INTERNAL_FUNCTION.
4008 * parse.c (write_exp_string): Remove duplicate word in comment.
4009 * python/python-function.c: New file.
4010 * python/python-internal.h (gdbpy_initialize_functions): Add
4012 * python/python.c (_initialize_python): Call
4013 gdbpy_initialize_functions.
4014 * valprint.c (value_check_printable): Handle values of type
4015 TYPE_CODE_INTERNAL_FUNCTION.
4016 * value.c: Include "cli/cli-decode.h".
4017 (internal_function): New struct.
4018 (functionlist, internal_fn_type): New static variables.
4019 (lookup_only_internalvar,
4020 lookup_internalvar): Add const qualifier to name argument.
4021 (create_internalvar): Likewise. Initialize new field.
4022 (set_internal_var): Fix typo in comment. Don't allow assignment
4023 to canonical variable.
4024 (value_create_internal_function, value_internal_function_name,
4025 call_internal_function, function_command, function_destroyer,
4026 add_internal_function): New functions.
4027 (_initialize_values): Create `function' placeholder command.
4028 Initialize internal_fn_type.
4029 * value.h (lookup_only_internalvar, create_internalvar,
4030 lookup_internalvar): Add const qualifier to name argument.
4031 (internal_function_fn, add_internal_function, call_internal_function,
4032 value_internal_function_name): Add prototypes.
4033 (struct internalvar) <canonical>: New field.
4035 2009-03-20 Tom Tromey <tromey@redhat.com>
4037 * c-lang.c (evaluate_subexp_c): Call check_typedef.
4039 2009-03-20 Tom Tromey <tromey@redhat.com>
4040 Julian Brown <julian@codesourcery.com>
4042 PR i18n/7220, PR i18n/7821, PR exp/8815, PR exp/9103,
4043 PR i18n/9401, PR exp/9613:
4045 * value.h (value_typed_string): Declare.
4046 (val_print_string): Update.
4047 * valprint.h (print_char_chars): Update.
4048 * valprint.c (print_char_chars): Add type argument. Update.
4049 (val_print_string): Likewise.
4050 * valops.c (value_typed_string): New function.
4051 * utils.c (host_char_to_target): New function.
4052 (parse_escape): Use host_char_to_target, host_hex_value. Update.
4054 (no_control_char_error): Remove.
4055 * typeprint.c (print_type_scalar): Update.
4056 * scm-valprint.c (scm_scmval_print): Update.
4057 * scm-lang.h (scm_printchar, scm_printstr): Update.
4058 * scm-lang.c (scm_printchar): Add type argument.
4059 (scm_printstr): Likewise.
4060 * printcmd.c (print_formatted): Update.
4061 (print_scalar_formatted): Update.
4062 (printf_command) <wide_string_arg, wide_char_arg>: New constants.
4063 Handle '%lc' and '%ls'.
4064 * parser-defs.h (struct typed_stoken): New type.
4065 (struct stoken_vector): Likewise.
4066 (write_exp_string_vector): Declare.
4067 * parse.c (write_exp_string_vector): New function.
4068 * p-valprint.c (pascal_val_print): Update.
4069 * p-lang.h (is_pascal_string_type, pascal_printchar,
4070 pascal_printstr): Update.
4071 * p-lang.c (is_pascal_string_type): Remove 'char_size' argument.
4072 Add 'char_type' argument.
4073 (pascal_emit_char): Add type argument.
4074 (pascal_printchar): Likewise.
4075 (pascal_printstr): Likewise.
4076 * objc-lang.c (objc_emit_char): Add type argument.
4077 (objc_printchar): Likewise.
4078 (objc_printstr): Likewise.
4079 * macroexp.c (get_character_constant): Handle unicode characters.
4081 (get_string_literal): Handle unicode strings. Use
4083 * m2-valprint.c (print_unpacked_pointer): Update.
4084 (m2_print_array_contents): Update.
4085 (m2_val_print): Update.
4086 * m2-lang.c (m2_emit_char): Add type argument.
4087 (m2_printchar): Likewise.
4088 (m2_printstr): Likewise.
4089 * language.h (struct language_defn) <la_printchar>: Add type
4091 <la_printstr, la_emitchar>: Likewise.
4092 (LA_PRINT_CHAR): Likewise.
4093 (LA_PRINT_STRING): Likewise.
4094 (LA_EMIT_CHAR): Likewise.
4095 * language.c (unk_lang_emit_char): Add type argument.
4096 (unk_lang_printchar): Likewise.
4097 (unk_lang_printstr): Likewise.
4098 * jv-valprint.c (java_val_print): Update.
4099 * jv-lang.c (java_emit_char): Add type argument.
4100 * f-valprint.c (f_val_print): Update.
4101 * f-lang.c (f_emit_char): Add type argument.
4102 (f_printchar): Likewise.
4103 (f_printstr): Likewise.
4104 * expprint.c (print_subexp_standard): Update.
4105 * charset.h (target_wide_charset): Declare.
4106 (c_target_char_has_backslash_escape, c_parse_backslash,
4107 host_char_print_literally, host_char_to_target,
4108 target_char_to_host, target_char_to_control_char): Remove.
4109 (enum transliterations): New type.
4110 (convert_between_encodings): Declare.
4111 (HOST_ESCAPE_CHAR): New define.
4112 (host_letter_to_control_character, host_hex_value): Declare.
4113 (enum wchar_iterate_result): New enum.
4114 (struct wchar_iterator): Declare.
4115 (make_wchar_iterator, make_cleanup_wchar_iterator, wchar_iterator,
4116 wchar_push_back): Declare.
4117 * charset-list.h: New file.
4118 * c-valprint.c (textual_name): New function.
4119 (textual_element_type): Handle wide character types.
4120 (c_val_print): Pass original type to textual_element_type. Handle
4121 wide character types.
4122 (c_value_print): Use textual_element_type. Pass original type of
4124 * c-lang.h (enum c_string_type): New type.
4125 (c_printchar, c_printstr): Update.
4126 * c-lang.c (classify_type): New function.
4127 (print_wchar): Likewise.
4128 (c_emit_char): Add type argument. Handle wide characters.
4129 (c_printchar): Likewise.
4130 (c_printstr): Add type argument. Handle wide and multibyte
4132 (convert_ucn): New function.
4133 (emit_numeric_character): Likewise.
4134 (convert_octal): Likewise.
4135 (convert_hex): Likewise.
4136 (ADVANCE): New macro.
4137 (convert_escape): New function.
4138 (parse_one_string): Likewise.
4139 (evaluate_subexp_c): Likewise.
4140 (exp_descriptor_c): New global.
4141 (c_language_defn): Use exp_descriptor_c.
4142 (cplus_language_defn): Likewise.
4143 (asm_language_defn): Likewise.
4144 (minimal_language_defn): Likewise.
4145 (charset_for_string_type): New function.
4146 * c-exp.y (%union): Add 'svec' and 'tsval'.
4148 (exp): Add CHAR production.
4149 (string_exp): Rewrite.
4150 (exp) <string_exp>: Rewrite.
4151 (tempbuf): Now global.
4152 (tempbuf_init): New global.
4153 (parse_string_or_char): New function.
4154 (yylex) <tempbuf>: Now global.
4155 <tokptr, tempbufindex, tempbufsize, token_string, class_prefix>:
4157 Handle 'u', 'U', and 'L' prefixes. Call parse_string_or_char.
4158 (c_parse_escape): New function.
4159 * auxv.c (fprint_target_auxv): Update.
4160 * ada-valprint.c (ada_emit_char): Add type argument.
4161 (ada_printchar): Likewise.
4162 (ada_print_scalar): Update.
4163 (printstr): Add type argument. Update calls to ada_emit_char.
4164 (ada_printstr): Add type argument.
4165 (ada_val_print_array): Update.
4166 (ada_val_print_1): Likewise.
4167 * ada-lang.c (emit_char): Add type argument.
4168 * ada-lang.h (ada_emit_char, ada_printchar, ada_printstr): Add
4170 * gdb_locale.h: Include langinfo.h.
4171 * charset.c (_initialize_charset): Set default host charset from
4172 the locale. Don't register charsets. Add target-wide-charset
4173 commands. Call find_charset_names.
4174 (struct charset, struct translation): Remove.
4175 (GDB_DEFAULT_HOST_CHARSET): Remove.
4176 (GDB_DEFAULT_TARGET_WIDE_CHARSET): New define.
4177 (target_wide_charset_name): New global.
4178 (show_host_charset_name): Handle "auto".
4179 (show_target_wide_charset_name): New function.
4180 (host_charset_enum, target_charset_enum): Remove.
4181 (charset_enum): New global.
4182 (all_charsets, register_charset, lookup_charset, all_translations,
4183 register_translation, lookup_translation): Remove.
4184 (simple_charset, ascii_print_literally, ascii_to_control): Remove.
4185 (iso_8859_print_literally, iso_8859_to_control,
4186 iso_8859_family_charset): Remove.
4187 (ebcdic_print_literally, ebcdic_to_control,
4188 ebcdic_family_charset): Remove.
4189 (struct cached_iconv, check_iconv_cache, cached_iconv_convert,
4190 register_iconv_charsets): Remove.
4191 (target_wide_charset_be_name, target_wide_charset_le_name): New
4193 (identity_either_char_to_other): Remove.
4194 (set_be_le_names, validate): New functions.
4195 (backslashable, backslashed, represented): Remove.
4196 (default_c_target_char_has_backslash_escape): Remove.
4197 (default_c_parse_backslash, iconv_convert): Remove.
4198 (ascii_to_iso_8859_1_table, ascii_to_ebcdic_us_table,
4199 ascii_to_ibm1047_table, iso_8859_1_to_ascii_table,
4200 iso_8859_1_to_ebcdic_us_table, iso_8859_1_to_ibm1047_table,
4201 ebcdic_us_to_ascii_table, ebcdic_us_to_iso_8859_1_table,
4202 ebcdic_us_to_ibm1047_table, ibm1047_to_ascii_table,
4203 ibm1047_to_iso_8859_1_table, ibm1047_to_ebcdic_us_table): Remove.
4204 (table_convert_char, table_translation, simple_table_translation):
4206 (current_host_charset, current_target_charset,
4207 c_target_char_has_backslash_escape_func,
4208 c_target_char_has_backslash_escape_baton): Remove.
4209 (c_parse_backslash_func, c_parse_backslash_baton): Remove.
4210 (host_char_to_target_func, host_char_to_target_baton): Remove.
4211 (target_char_to_host_func, target_char_to_host_baton): Remove.
4212 (cached_iconv_host_to_target, cached_iconv_target_to_host):
4214 (lookup_charset_or_error, check_valid_host_charset): Remove.
4215 (set_host_and_target_charsets): Remove.
4216 (set_host_charset, set_target_charset): Remove.
4217 (set_host_charset_sfunc, set_target_charset_sfunc): Rewrite.
4218 (set_target_wide_charset_sfunc): New function.
4219 (show_charset): Print target wide character set.
4220 (host_charset, target_charset): Rewrite.
4221 (target_wide_charset): New function.
4222 (c_target_char_has_backslash_escape): Remove.
4223 (c_parse_backslash): Remove.
4224 (host_letter_to_control_character): New function.
4225 (host_char_print_literally): Remove.
4226 (host_hex_value): New function.
4227 (target_char_to_control_char): Remove.
4228 (cleanup_iconv): New function.
4229 (convert_between_encodings): New function.
4230 (target_char_to_host): Remove.
4231 (struct wchar_iterator): Define.
4232 (make_wchar_iterator, make_cleanup_wchar_iterator, wchar_iterator,
4233 wchar_push_back): New functions.
4234 (do_cleanup_iterator): New function.
4235 (char_ptr): New typedef.
4236 (charsets): New global.
4237 (add_one, find_charset_names): New functions.
4238 (default_charset_names): New global.
4239 (auto_host_charset_name): Likewise.
4240 * aclocal.m4, config.in, configure: Rebuild.
4241 * configure.ac: Call AM_LANGINFO_CODESET.
4242 (GDB_DEFAULT_HOST_CHARSET): Default to UTF-8.
4243 (AM_ICONV): Invoke earlier.
4244 * acinclude.m4: Include codeset.m4. Subst LIBICONV_INCLUDE and
4245 LIBICONV_LIBDIR. Check for libiconv in build tree.
4246 * Makefile.in (LIBICONV_LIBDIR, LIBICONV_INCLUDE): New macros.
4247 (INTERNAL_CFLAGS_BASE): Add LIBICONV_INCLUDE.
4248 (INTERNAL_LDFLAGS): Add LIBICONV_LIBDIR.
4249 * gdb_obstack.h (obstack_grow_wstr): New define.
4250 * gdb_wchar.h: New file.
4251 * defs.h: Include it.
4253 2009-03-20 Tom Tromey <tromey@redhat.com>
4254 Jan Kratochvil <jan.kratochvil@redhat.com>
4256 * dwarf2read.c (process_die): Handle DW_TAG_typedef.
4257 * eval.c (evaluate_subexp_standard) <OP_TYPE>: Strip a single
4259 * ada-lang.c (decode_packed_array_type): Call CHECK_TYPEDEF on the
4261 * ada-typeprint.c (print_array_type): Do the NULL check
4264 2009-03-19 Tom Tromey <tromey@redhat.com>
4266 * utils.c (do_obstack_free): New function.
4267 (make_cleanup_obstack_free): Likewise.
4268 * defs.h (make_cleanup_obstack_free): Declare.
4270 2009-03-18 Doug Evans <dje@google.com>
4272 * linux-nat.c (linux_nat_find_memory_regions): Result of PIDGET is an
4273 int, not a long long.
4274 (linux_nat_info_proc_cmd): Store pid in long instead of long long.
4276 * expprint.c (dump_raw_expression): Print note if non-NULL.
4278 * printcmd.c (display_uses_solib_p): Redo loop, scan element list
4281 2009-03-18 Nathan Sidwell <nathan@codesourcery.com>
4283 * Makefile.in: Update license to GPLv3.
4284 * ada-exp.y: Update license to GPLv3.
4285 * ada-lex.l: Update license to GPLv3.
4286 * c-exp.y: Update license to GPLv3.
4287 * cp-name-parser.y: Update license to GPLv3.
4288 * darwin-nat-info.c: Update license to GPLv3.
4289 * f-exp.y: Update license to GPLv3.
4290 * gdb_thread_db.h: Update license to GPLv3.
4291 * hppanbsd-nat.c: Update license to GPLv3.
4292 * hppanbsd-tdep.c: Update license to GPLv3.
4293 * hppaobsd-tdep.c: Update license to GPLv3.
4294 * jv-exp.y: Update license to GPLv3.
4295 * m2-exp.y: Update license to GPLv3.
4296 * objc-exp.y: Update license to GPLv3.
4297 * p-exp.y: Update license to GPLv3.
4298 * reply_mig_hack.awk: Update license to GPLv3.
4299 * reverse.c: Update license to GPLv3.
4300 * xtensa-xtregs.c: Update license to GPLv3.
4302 2009-03-18 Pedro Alves <pedro@codesourcery.com>
4304 * remote.c (remote_close): Don't call generic_mourn_inferior.
4305 (remote_mourn_1): Call generic_mourn_inferior after closing the
4308 2009-03-18 Pedro Alves <pedro@codesourcery.com>
4310 * remote.c (remote_start_remote): Add missing call to
4311 init_wait_for_inferior in non-stop mode.
4313 2009-03-18 Pedro Alves <pedro@codesourcery.com>
4315 * breakpoint.c (bpstat_should_step): Only consider software
4316 watchpoints that have a location.
4318 2009-03-17 Joel Brobecker <brobecker@adacore.com>
4320 Add a target_ops parameter to the to_kill method in struct target_ops.
4322 * target.h (struct target_ops): Add a "target_ops *" parameter to
4324 (target_kill): Remove macro. Add declaration.
4325 * target.c (debug_to_kill): Delete, no longer necessary.
4326 (target_kill): New function.
4327 (update_current_target): Stop inheriting the to_kill method.
4328 Do not de_fault it to no_process either.
4329 (setup_target_debug): Do not set current_target.to_kill.
4330 * gnu-nat.c, go32-nat.c, hpux-thread.c, inf-ptrace.c, inf-ttrace.c,
4331 linux-nat.c, monitor.c, nto-procfs.c, procfs.c, remote-m32r-sdi.c,
4332 remote-mips.c, remote-sim.c, remote.c, windows-nat.c: Update
4335 2009-03-17 Doug Evans <dje@google.com>
4337 * amd64-linux-nat.c (si_timerid,si_overrun): Provide definition for
4338 glibc 2.3.2 and earlier.
4340 2009-03-17 Joel Brobecker <brobecker@adacore.com>
4342 * frame.c (get_prev_frame_1): Do not perform the inner_frame
4343 sanity check if this_frame is not NORMAL.
4344 (frame_id_inner): Update the description of this function.
4346 2009-03-17 Hui Zhu <teawater@gmail.com>
4348 * stack.c: Change the introduce of "disassemble-next-line".
4350 2009-03-17 Pedro Alves <pedro@codesourcery.com>
4352 * mi/mi-main.h (mi_print_timing_maybe): Add strict prototype,
4355 2009-03-17 Hui Zhu <teawater@gmail.com>
4357 * stack.c: Include valprint.h.
4358 (disassemble_next_line): New enum.
4359 (show_disassemble_next_line): New function. Show the current
4360 value of disassemble-next-line.
4361 (gdb_disassembly_stub_args): New struct for argument passing
4362 between function do_gdb_disassembly and function
4363 gdb_disassembly_stub.
4364 (gdb_disassembly_stub): New function. Helper for
4366 (do_gdb_disassembly): New function. Use TRY_CATCH to catch
4367 the exception from the gdb_disassembly because it will be
4368 broken by filter sometime.
4369 (print_frame_info): If disassemble-next-line is set to auto
4370 or on and doesn't have the line debug messages for $pc,
4371 output the next instruction.
4372 If disassemble-next-line is set to on and there is line debug
4373 messages, output assembly codes for next line.
4374 (_initialize_stack): Make the "set disassemble-next-line"
4375 command an auto-boolean command. Change its class to
4376 class_stack. Place it in the top level set list. Extend help
4377 to describe the auto mode.
4379 2009-03-17 Pedro Alves <pedro@codesourcery.com>
4381 * infrun.c (normal_stop): Don't overwrite old_chain.
4383 2009-03-16 Joel Brobecker <brobecker@adacore.com>
4385 * remote-mips.c (mips_load): Replace call to regcache_set_valid_p,
4386 which is undefined, by call to regcache_invalidate, which should
4387 do what the original author wanted to do.
4389 2009-03-16 Joel Brobecker <brobecker@adacore.com>
4391 * remote-mips.c (mips_mourn_inferior): Add missing ops parameter.
4392 (mips_create_inferior): Likewise.
4394 2009-03-16 Joel Brobecker <brobecker@adacore.com>
4396 * go32-nat.c (go32_create_inferior): Add missing ops parameter.
4398 2009-03-16 Joel Brobecker <brobecker@adacore.com>
4400 * darwin-nat.c (darwin_resume): Fix a compiler warning when
4401 building on x86_64-darwin.
4403 2009-03-16 Tristan Gingold <gingold@adacore.com>
4405 * configure.tgt: Add handling for x86_64-darwin.
4407 2009-03-16 Jan Kratochvil <jan.kratochvil@redhat.com>
4409 * auxv.c (fprint_target_auxv): New TAG for AT_RANDOM.
4411 2009-03-15 Joel Brobecker <brobecker@adacore.com>
4413 * aix-thread.c (aix_thread_thread_alive, aix_thread_pid_to_str):
4414 Use the ops parameter to get to the target beneath, rather than
4415 using the current_target global. Using the current_target global
4416 was an unintended accident.
4418 2009-03-15 Joel Brobecker <brobecker@adacore.com>
4420 Fix an error happening while loading symbols from a core file
4423 * rs6000-nat.c (xcoff_relocate_symtab): Use target_has_execution
4424 to detect whether we're debugging a core file or not.
4426 2009-03-15 Joel Brobecker <brobecker@adacore.com>
4428 Modernize the aix-thread later by getting rid of the base_target
4429 global. This brings back to life the AIX port which was otherwise
4430 crashing all the time.
4432 * aix-thread.c (base_target): Delete.
4433 (pd_enable): Do not set base_target.
4434 (aix_thread_attach): Use find_target_beneath instead of base_target.
4435 (aix_thread_detach, aix_thread_resume, aix_thread_wait)
4436 (aix_thread_fetch_registers, aix_thread_store_registers),
4437 (aix_thread_xfer_partial, aix_thread_mourn_inferior)
4438 (aix_thread_thread_alive, aix_thread_pid_to_str): Likewise.
4439 (aix_thread_kill): Delete. Does not seem necessary.
4440 (init_aix_thread_ops): Do not set aix_thread_ops.to_kill.
4442 2009-03-15 Jan Kratochvil <jan.kratochvil@redhat.com>
4444 * stack.c (return_command <retval_exp>): New variables retval_expr
4445 and old_chain. Inline parse_and_eval to initialize retval_expr. Check
4446 RETVAL_EXPR for UNOP_CAST and set RETURN_TYPE to the RETURN_VALUE type
4447 if RETURN_TYPE is NULL.
4449 2009-03-14 Pedro Alves <pedro@codesourcery.com>
4451 * remote.c (PACKET_qAttached): New.
4452 (remote_query_attached): New.
4453 (remote_add_inferior): Add new `attached' argument. Handle it.
4454 (remote_notice_new_inferior, remote_start_remote): Adjust to pass
4455 -1 to remote_add_inferior in new parameter.
4456 (extended_remote_attach_1): Adjust to pass 1 to
4457 remote_add_inferior in the new parameter.
4458 (extended_remote_create_inferior_1): Adjust to pass 0 to
4459 remote_add_inferior in the new parameter.
4460 (_initialize_remote): Add "set/show remote query-attached-packet"
4463 2009-03-13 Tom Tromey <tromey@redhat.com>
4465 * symtab.c (lookup_symbol_in_language): Use a cleanup.
4467 2009-03-13 Doug Evans <dje@google.com>
4469 * exceptions.h: Clean up some comments on catch_exceptions usage.
4470 * exceptions.c: Ditto. Plus mark catch_errors as superseded by
4473 2009-02-17 Joel Brobecker <brobecker@adacore.com>
4475 The following patch helps getting rid of a warning inside solib-som.c.
4477 * source.c (source_full_path_of): Constify parameter filename.
4478 * defs.h (source_full_path_of): Update declaration accordingly.
4480 2009-03-12 Joel Brobecker <brobecker@adacore.com>
4482 * ada-lang.c (ada_evaluate_subexp): Merge case BINOP_REM and
4483 BINOP_MOD cases with the handling of case BINOP_DIV and BINOP_MUL.
4484 Remove useless op value checks when EVAL_AVOID_SIDE_EFFECTS.
4486 2009-03-12 Joel Brobecker <brobecker@adacore.com>
4488 * ada-lang.c (ada_evaluate_subexp) <BINOP_DIV>: make sure to
4489 promote the operands when noside is EVAL_AVOID_SIDE_EFFECTS.
4491 2009-03-12 Joel Brobecker <brobecker@adacore.com>
4493 * ada-tasks.c (ada_task_is_alive): Move up and make static.
4494 * ada-lang.h (ada_task_is_alive): Remove declaration.
4496 2009-03-12 Jerome Guitton <guitton@adacore.com>
4498 * ada-lang.c (ada_delta): Change the type of numerators and
4499 denominators to DOUBLEST, as they may not fit into a long.
4500 (scaling_factor): Ditto.
4502 2009-03-12 Jerome Guitton <guitton@adacore.com>
4504 * language.c (lang_bool_type): Set lai->bool_type_symbol to NULL.
4506 2009-03-12 Joel Brobecker <brobecker@adacore.com>
4508 * ada-lang.c (ada_evaluate_subexp) [OP_VAR_VALUE]: For tagged
4509 types, if we are unable to determine the actual symbol type
4510 from its tag, then use the static approximation instead.
4512 2009-03-12 Joel Brobecker <brobecker@adacore.com>
4514 Fix crash printing packed record with packed array.
4516 * ada-lang.c (ada_modulus_from_name): New function.
4517 (ada_modulus): In the case where the type length is bigger than
4518 the size of the type used to hold the bounds, try determining
4519 the modulus from the type name.
4520 (ada_value_primitive_packed_val): Fix bug in the computation of
4521 ntarg causing an out-of-buffer invalid access.
4523 2009-03-12 Joel Brobecker <brobecker@adacore.com>
4525 Fix segfault when printing short_integer'last.
4527 * ada-lang.c (ada_find_any_type): Search in the primitive types
4528 if a symbol could not be found.
4530 2009-03-12 Joel Brobecker <brobecker@adacore.com>
4532 * ada-tasks.c (task_states,long_task_states): Add new states
4533 Activating and Acceptor_Delay_Sleep. Update the description
4534 of state Acceptor_Sleep.
4536 2009-03-12 Jonas Maebe <jonas.maebe@elis.ugent.be> (obvious change)
4538 Fix a build failure on Darwin following some changes in
4539 the profile of some target_ops methods.
4541 * darwin-nat.c (darwin_kill_inferior): Add target_ops parameter
4543 (darwin_stop_inferior, darwin_detach): Likewise.
4545 2009-03-12 Vladimir Prus <vladimir@codesourcery.com>
4547 Include token in ^running notification for CLI commands.
4549 * mi/mi-main.c (mi_execute_command): Set current_token here.
4550 (mi_cmd_execute): Do not set current_token here.
4552 2009-03-12 Vladimir Prus <vladimir@codesourcery.com>
4556 * mi/mi-main.c (mi_print_timing_maybe): New.
4557 (captured_mi_execute_command): Simplify. Output timings to
4559 (mi_execute_async_cli_command): Do not print timings.
4560 * mi/mi-main.h (mi_print_timing_maybe): Declare.
4561 * mi/mi-interp.c (mi_on_normal_stop): Call mi_print_timing_maybe.
4563 2009-03-12 Jerome Guitton <guitton@adacore.com>
4565 * xcoffread.c (process_linenos): Check if the line in the
4566 include table refers to the main source file and, if so,
4567 add them to the main subfile.
4569 2009-03-12 Joel Brobecker <brobecker@adacore.com>
4571 Fix a build failure on AIX introduced after a change in the profile
4572 of some of the "methods" in the target_ops structure.
4573 * aix-thread.c: Add missing target_ops parameter throughout.
4575 Implement Ada task switching on AIX.
4576 * aix-thread.c (aix_thread_get_ada_task_ptid): New function.
4577 (init_aix_thread_ops): Set aix_thread_ops.to_get_ada_task_ptid.
4579 2009-03-11 Daniel Jacobowitz <dan@codesourcery.com>
4581 * breakpoint.c (bpstat_check_breakpoint_conditions): Use
4582 value_mark and value_free_to_mark.
4583 * objfiles.c (free_objfile): Call objfile_free_data before
4586 2009-03-10 Hui Zhu <teawater@gmail.com>
4588 * disasm.c (gdb_disassembly): Remove unused argument
4590 * disasm.h (gdb_disassembly): Ditto.
4591 * cli/cli-cmds.c (print_disassembly): Ditto.
4592 * mi/mi-cmd-disas.c (mi_cmd_disassemble): Ditto.
4594 2009-03-09 Paul Pluzhnikov <ppluzhnikov@google.com>
4596 * solib.c (solib_contains_address_p): New function.
4597 (solib_name_from_address): Use it.
4598 * printcmd.c (display_uses_solib_p): Use it.
4599 * solib.h (solib_contains_address_p): Declare it.
4601 2009-03-09 Jan Kratochvil <jan.kratochvil@redhat.com>
4603 * varobj.c (free_variable): Call value_free.
4605 2009-03-09 Jan Kratochvil <jan.kratochvil@redhat.com>
4608 * dwarf2read.c (dwarf_decode_macros): New variable `at_commandline'.
4609 Move the variable `macinfo_type' out of the loop. Create a new
4610 processing pass before the current one to pre-create `current_file'.
4611 New complaint on misplaced zero/non-zero definitions/includes.
4612 Skip first DW_MACINFO_start_file with `at_commandline' set.
4614 2008-03-09 Vladimir Prus <vladimir@codesourcery.com>
4616 * solib.c (reload_shared_libraries): Give
4617 inferior a chance to reset solib breakpoint.
4620 2009-03-08 Christopher Faylor <me+cygwin@cgf.cx>
4622 * windows-nat.c (dr): Redefine to use largest possible integer which
4624 (cygwin_set_dr): Avoid coercion.
4626 2009-03-08 Oswald Buddenhagen <oswald.buddenhagen@trolltech.de>
4628 * windows-nat.c (windows_create_inferior): Implement --tty handling on
4631 2009-03-06 Paul Pluzhnikov <ppluzhnikov@google.com>
4633 Rename solib_address to solib_name_from_address.
4634 * breakpoint.c (insert_bp_location, disable_breakpoints_in_shlibs)
4635 (disable_breakpoints_in_unloaded_shlib): Update.
4636 * printcmd.c (display_uses_solib_p): Likewise.
4637 * stack.c (print_frame): Likewise.
4641 2009-03-05 Paul Pluzhnikov <ppluzhnikov@google.com>
4643 * printcmd.c (do_one_display): Reparse exp_string.
4644 (display_uses_solib_p): New function.
4645 (clear_dangling_display_expressions): New function.
4646 (_initialize_printcmd): Add observer.
4647 * solib.c (no_shared_libraries): Swap order of calls to
4648 clear_solib and objfile_purge_solibs.
4650 2009-03-05 Joel Brobecker <brobecker@adacore.com>
4652 Implement the target-specific part of Ada tasking support
4655 * dec-thread.c (dec_thread_get_ada_task_ptid): New function.
4656 (init_dec_thread_ops): Set the to_get_ada_task_ptid method.
4658 2009-03-05 Joel Brobecker <brobecker@adacore.com>
4660 Get rid of the global "base_target" and use "find_target_beneath"
4661 to find the underlying target.
4662 * dec-thread.c (base_target): Delete.
4663 (enable_dec_thread): Remove assignement to base_target.
4664 (dec_thread_detach, dec_thread_wait, dec_thread_wait)
4665 (dec_thread_fetch_registers, dec_thread_store_registers)
4666 (dec_thread_mourn_inferior, dec_thread_pid_to_str):
4667 Update the function profile if necessary.
4668 Use find_target_beneath to call the same method but from
4669 the underlying target, removing the need for "base_target".
4671 * dec-thread.c (dec_thread_get_regsets, dec_thread_set_regsets):
4672 Fix a copy/paste error in a few debug traces...
4674 * solib-osf.c (init_so): Use a simpler method for computing
4675 the size of lm_info structure. This also gets rid of warning
4676 emitted by the compiler.
4678 2009-03-05 Pedro Alves <pedro@codesourcery.com>
4680 * breakpoint.c (check_duplicates_for): Skip permanent breakpoints
4681 duplicates of permanent breakpoints.
4683 2009-03-04 Pedro Alves <pedro@codesourcery.com>
4685 * inferior.h (notice_new_inferior): Declare.
4686 * infcmd.c (notice_new_inferior): New.
4687 * remote.c (remote_add_inferior, remote_add_thread): New.
4688 (notice_new_inferiors): Rename to...
4689 (remote_notice_new_inferior): ... this. Add RUNNING argument.
4690 Use remote_add_thread instead of add_thread, passing it the
4691 RUNNING argument. Add an inferior with remote_add_inferior. If
4692 we just learned about an inferior, call notice_new_inferior.
4693 (record_currthread): Adjust.
4694 (remote_threads_info): Adjust to use remote_notice_new_inferior.
4695 (remote_start_remote, extended_remote_attach_1): Use
4696 remote_add_inferior.
4697 (process_stop_reply): Adjust. Call remote_notice_new_inferior
4698 after handling expedited registers and watchpoint state.
4699 (extended_remote_create_inferior_1): Use remote_add_inferior.
4701 2009-03-04 Aleksandar Ristovski <aristovski@qnx.com>
4703 * infcmd.c (registers_info): Remove register number case.
4705 2009-03-03 Pedro Alves <pedro@codesourcery.com>
4707 * top.c (quit_target): Check for target_has_execution before
4708 killing or detaching from inferiors.
4710 2009-03-02 Joel Brobecker <brobecker@adacore.com>
4712 Remove some unused routines.
4714 * ada-lang.c (is_suppressed_name, ada_suppress_symbol_printing):
4716 * ada-lang.c (ada_task_list_iterator_ftype)
4717 (iterate_over_live_ada_tasks): Delete.
4718 * ada-tasks.c (ada_get_environment_task, iterate_over_live_ada_tasks):
4721 2009-03-01 Doug Evans <dje@google.com>
4723 * symtab.c: Remove trailing whitespace throughout the file.
4724 (expand_line_sal): Fix some typos and whitespace.
4726 * Makefile.in (clean): rm -f $(DEPDIR)/*.
4728 * Makefile.in (GDB_CFLAGS): Add -I$(srcdir)/common.
4729 (init.c): signals/ -> common/.
4730 (signals.o): Update.
4731 * target.h (target_signal_to_string,target_signal_to_string)
4732 (target_signal_from_name,target_signal_to_host_p)
4733 (target_signal_from_host,target_signal_to_host): Move to ...
4734 * common/gdb_signals.h: ... here. New file.
4735 * common/signals.c: Moved here from signals/signals.c.
4736 #include gdb_signals.h, remove #include of target.h in gdb case.
4737 (target_signal_from_command,default_target_signal_to_host)
4738 (default_target_signal_from_host): Move inside #ifndef GDBSERVER.
4740 Include thread ID in target_wait debugging output.
4741 * infrun.c (print_target_wait_results): New function.
4742 (wait_for_inferior,fetch_inferior_event): Call it.
4744 2009-02-27 Pedro Alves <pedro@codesourcery.com>
4746 * gdb_proc_service.h (struct ps_prochandle): Replace pid_t field
4747 with a ptid_t field.
4748 * linux-thread-db.c (thread_get_info_callback): Build the ptid
4749 using the pid stored in proc_handle.ptid.
4750 (thread_from_lwp, thread_db_attach_lwp, enable_thread_event)
4751 (check_for_thread_db, thread_db_detach, check_event)
4752 (thread_db_mourn_inferior, find_new_threads_callback)
4753 (thread_db_find_new_threads_1): Adjust.
4754 * proc-service.c (ps_xfer_memory, ps_lgetregs, ps_lsetregs)
4755 (ps_lgetfpregs, ps_lsetfpregs, ps_getpid): Adjust.
4757 2009-02-27 Phil Muldoon <pmuldoon@redhat.com>
4759 * valprint.c (read_string): Rework clean-up logic. Use
4760 free_current_contents to clean-up buffer.
4762 2009-02-27 Andreas Schwab <schwab@linux-m68k.org>
4764 * MAINTAINERS: Update e-mail address.
4766 2009-02-26 Phil Muldoon <pmuldoon@redhat.com>
4768 * python/python-utils.c (python_string_to_unicode): Always return
4770 (python_string_to_target_string): Decrement transient python
4772 (python_string_to_host_string): Likewise.
4774 2007-02-26 Pedro Alves <pedro@codesourcery.com>
4776 * mips-linux-nat.c (mips64_linux_fetch_registers): Pass `ops' to
4777 call to super_fetch_registers.
4778 (mips64_linux_store_registers): Pass `ops' to call to
4779 super_store_registers.
4781 2009-02-25 Doug Evans <dje@google.com>
4783 * breakpoint.c (insert_bp_location): Add \n to overlay breakpoint
4786 * breakpoint.c (disable_breakpoints_in_shlibs): Delete local
4787 disabled_shlib_breaks, unused.
4789 * printcmd.c (build_address_symbolic): Fix comment.
4791 2009-02-25 Hui Zhu <teawater@gmail.com>
4793 * cli/cli-script.c (define_command): Add _() to query.
4794 * gnu-nat.c (inf_validate_task_sc): Ditto.
4795 * infcmd.c (kill_if_already_running): Ditto.
4796 (jump_command): Ditto.
4797 (attach_command): Ditto.
4798 * inflow.c (kill_command): Ditto.
4799 * infrun.c (handle_command): Ditto.
4800 * maint.c (maintenance_dump_me): Ditto.
4801 * memattr.c (mem_delete_command): Ditto.
4802 * monitor.c (monitor_interrupt_query): Ditto.
4803 * nto-procfs.c (interrupt_query): Ditto.
4804 * printcmd.c (undisplay_command): Ditto.
4805 * remote-mips.c (mips_kill): Ditto.
4806 * remote.c (interrupt_query): Ditto.
4807 * solib-irix.c (irix_open_symbol_file_object): Ditto.
4808 * solib-osf.c (osf_open_symbol_file_object): Ditto.
4809 * solib-pa64.c (pa64_open_symbol_file_object): Ditto.
4810 * solib-som.c (som_open_symbol_file_object): Ditto.
4811 * solib-svr4.c (open_symbol_file_object): Ditto.
4812 * symfile.c (symbol_file_add_with_addrs_or_offsets): Ditto.
4813 * target.c (kill_or_be_killed): Ditto.
4814 * tracepoint.c (delete_trace_command): Ditto.
4815 * top.c (quit_confirm): Add _() to s that will be used
4818 2009-02-24 Pierre Muller <muller@ics.u-strasbg.fr>
4820 Fix windows-nat.c compilation failure.
4822 * windows-nat.c (windows_thread_alive): Fix forward declaration.
4823 (get_windows_debug_event): Add ops parameter to call to windows_resume.
4825 2009-02-23 Pedro Alves <pedro@codesourcery.com>
4827 * remote-sim.c (gdbsim_resume): Add target_ops* argument.
4829 2009-02-23 Jay Krell <jay.krell@cornell.edu> (tiny change)
4831 * symtab.c (find_line_symtab): Initialize exact to avoid
4834 2009-02-23 Pedro Alves <pedro@codesourcery.com>
4836 * i386-linux-nat.c (i386_linux_fetch_inferior_registers): Pass
4837 `ops' to recursive call.
4839 2009-02-23 Pedro Alves <pedro@codesourcery.com>
4841 * corelow.c (get_core_registers): Adjust.
4842 (core_file_thread_alive): Rename to...
4843 (core_thread_alive): ... this.
4844 (core_pid_to_str): Try gdbarch_core_pid_to_str first.
4845 (init_core_ops): Adjust.
4846 (coreops_suppress_target): Delete.
4847 (_initialize_corelow): Unconditionally add core_ops.
4848 * procfs.c: Include "inf-child.h".
4849 (procfs_ops): Delete.
4850 (init_procfs_ops): Delete. Reimplement as...
4851 (procfs_target): ... this, inheriting from inf-child.
4852 (procfs_attach, procfs_detach, procfs_fetch_registers): Adjust.
4853 (procfs_prepare_to_store): Delete.
4854 (procfs_store_registers, procfs_resume): Adjust.
4855 (procfs_open): Delete.
4856 (procfs_suppress_run): Delete.
4857 (procfs_can_run): Delete.
4858 (procfs_mourn_inferior): Adjust.
4859 (procfs_init_inferior): Add target_ops parameter. Adjust.
4860 (procfs_create_inferior): Don't pass procfs_init_inferior to
4861 fork_inferior. Instead call it after fork_inferior returns.
4862 (procfs_find_new_threads): Adjust.
4863 (_initialize_procfs): Adjust to use procfs_target instead of
4865 * sol-thread.c (orig_core_ops, sol_core_ops): Delete.
4866 (lwp_to_thread): Use target_thread_alive.
4867 (sol_thread_open): Delete.
4868 (sol_thread_attach): Delete.
4869 (sol_thread_detach, sol_thread_resume, sol_thread_wait)
4870 (sol_thread_fetch_registers, sol_thread_store_registers): Adjust
4871 to use find_target_beneath.
4872 (sol_thread_prepare_to_store, sol_thread_xfer_memory): Delete.
4873 (sol_thread_xfer_partial): Adjust to use find_target_beneath.
4874 (sol_thread_files_info, sol_thread_kill_inferior): Delete.
4875 (check_for_thread_db): New.
4876 (sol_thread_notice_signals, sol_thread_create_inferior): Delete.
4877 (sol_thread_new_objfile): Call check_for_thread_db.
4878 (sol_thread_mourn_inferior): Adjust to use find_target_beneath.
4879 (sol_thread_can_run): Delete.
4880 (sol_thread_alive): Adjust to use find_target_beneath.
4881 (sol_thread_stop): Delete.
4882 (rw_common): Use target_write_memory or target_read_memory.
4883 (ps_lgetregs, ps_lgetfpregs): Use target_fetch_registers.
4884 (ps_lsetregs, ps_lsetfpregs): Use target_store_registers.
4885 (solaris_pid_to_str): Remove check for libthread_db initialization
4887 (sol_find_new_threads): Remove check for libthread_db
4888 initialization failing, or for an invalid inferior_ptid. Adjust
4889 to use find_target_beneath.
4890 (sol_core_open, sol_core_close, sol_core_detach,
4891 sol_core_files_info, sol_find_memory_regions,
4892 sol_make_note_section, ignore): Delete.
4893 (init_sol_thread_ops): Make it a thread_stratum target. Remove
4894 unneeded callback settings.
4895 (init_sol_core_ops): Delete.
4896 (_initialize_sol_thread): No longer call init_sol_core_ops, set
4897 procfs_suppress_run, or hack with core_ops.
4899 * target.h (struct target_ops): Add a target_ops * parameter to
4900 to_resume, to_fetch_registers, to_store_registers, to_thread_alive
4901 and to_find_new_threads.
4902 (target_fetch_registers, target_store_registers)
4903 (target_thread_alive, target_find_new_threads): Redeclare as
4906 * target.c (update_current_target): Do not inherit or de_fault
4907 to_resume, to_fetch_registers, to_store_registers,
4908 to_thread_alive, to_find_new_threads.
4909 (target_resume): Adjust.
4910 (target_thread_alive, target_find_new_threads): New.
4911 (debug_to_resume, debug_to_fetch_registers): Delete.
4912 (target_fetch_registers): New.
4913 (debug_to_store_registers): Delete.
4914 (target_store_registers): New.
4915 (debug_to_thread_alive, debug_to_find_new_threads): Delete.
4916 (setup_target_debug): Adjust.
4918 * gdbcore.h (core_ops): Delete declaration.
4920 * inf-ptrace.c, linux-nat.c, remote.c, amd64-linux-nat.c,
4921 inf-child.c, linux-thread-db.c, bsd-uthread.c, inf-ttrace.c,
4922 i386-sol2-tdep.c, darwin-nat.c, gnu-nat.c, go32-nat.c,
4923 hpux-thread.c, i386-linux-nat.c, i386fbsd-nat.c, monitor.c,
4924 nto-procfs.c, remote-m32r-sdi.c, remote-mips.c, windows-nat.c,
4925 alphabsd-nat.c, amd64bsd-nat.c, arm-linux-nat.c, armnbsd-nat.c,
4926 bsd-kvm.c, hppa-hpux-nat.c, hppa-linux-nat.c, hppabsd-nat.c,
4927 hppanbsd-nat.c, i386-darwin-nat.c, i386bsd-nat.c,
4928 ia64-linux-nat.c, m32r-linux-nat.c, m68kbsd-nat.c,
4929 m68klinux-nat.c, m88kbsd-nat.c, mips-linux-nat.c,
4930 mips64obsd-nat.c, mipsnbsd-nat.c, ppc-linux-nat.c, ppcnbsd-nat.c,
4931 ppcobsd-nat.c, remote-sim.c, rs6000-nat.c, s390-nat.c,
4932 shnbsd-nat.c, sparc-nat.c, sparc-nat.h, spu-linux-nat.c,
4933 vaxbsd-nat.c, xtensa-linux-nat.c: Adjust to target_ops changes.
4935 * gdbarch.sh (core_pid_to_str): New gdbarch callback.
4936 * gdbarch.h, gdbarch.c: Regenerate.
4938 * sol2-tdep.c: Include "inferior.h".
4939 (sol2_core_pid_to_str): New.
4940 * sol2-tdep.h (sol2_core_pid_to_str): Declare.
4942 * amd64-sol2-tdep.c (amd64_sol2_init_abi): Set it.
4943 * sparc-sol2-tdep.c (sparc32_sol2_init_abi): Set it.
4944 * sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Set it.
4945 * i386-sol2-tdep.c (i386_sol2_init_abi): Set it.
4947 2009-02-22 Doug Evans <dje@google.com>
4949 * exec.c (exec_file_attach): Fix comment.
4951 2009-02-22 Pedro Alves <pedro@codesourcery.com>
4953 Silence a few -Wmissing-prototypes warnings.
4956 * alpha-linux-tdep.c (alpha_linux_regset_from_core_section): Make
4958 * alpha-osf1-tdep.c (_initialize_alpha_osf1_tdep): Declare.
4959 * amd64fbsd-tdep.c (amd64fbsd_init_abi): Make it static.
4960 * amd64nbsd-tdep.c (_initialize_amd64nbsd_ndep): Rename to ...
4961 (_initialize_amd64nbsd_tdep): ... this.
4962 * arm-linux-tdep.c (arm_linux_software_single_step): Make it static.
4963 (_initialize_arm_linux_tdep): Declare.
4964 * armbsd-tdep.c (armbsd_fpreg_offset): Make it static.
4965 * armnbsd-tdep.c (_initialize_arm_netbsd_tdep): Declare.
4966 * armobsd-tdep.c (_initialize_armobsd_tdep): Declare.
4967 * avr-tdep.c (avr_return_value): Make it static.
4968 (avr_frame_unwind_cache): Ditto.
4969 * bsd-uthread.c (bsd_uthread_inferior_created): Ditto.
4970 (bsd_uthread_solib_loaded): Ditto.
4971 (bsd_uthread_solib_unloaded): Ditto.
4972 (bsd_uthread_target): Ditto.
4973 (_initialize_bsd_uthread): Declare.
4974 * cris-tdep.c (crisv32_single_step_through_delay): Make it static.
4975 (cris_frame_unwind_cache): Ditto.
4976 * frv-tdep.c (frv_return_value): Ditto.
4977 * h8300-tdep.c (h8300_use_struct_convention): Ditto.
4978 (h8300h_use_struct_convention): Ditto.
4979 * hppa-tdep.c (hppa_sign_extend, hppa_low_hppa_sign_extend):
4981 * hppa-tdep.h (hppa_low_sign_extend, hppa_sign_extend): Delete
4983 * hppabsd-tdep.c: Include hppabsd-tdep.h.
4984 (hppabsd_find_global_pointer): Make it static.
4985 * hppabsd-tdep.h: New.
4986 * hppanbsd-tdep.c: Include hppabsd-tdep.h.
4987 (hppabsd_init_abi): Remove declaration.
4988 (_initialize_hppabsd_tdep): Remove declaration.
4989 (_initialize_hppanbsd_tdep): Declare.
4990 * hppaobsd-tdep.c: Include hppabsd-tdep.h.
4991 (hppabsd_init_abi): Delete declaration.
4992 (hppaobsd_init_abi): Make it static.
4993 * i386-nto-tdep.c (_initialize_i386nto_tdep): Declare.
4994 * i386nbsd-tdep.c (_initialize_i386nbsd_tdep): Declare.
4995 * ia64-linux-tdep.c (_initialize_ia64_linux_tdep): Declare.
4996 * ia64-tdep.c (ia64_register_reggroup_p): Make it static.
4997 * iq2000-tdep.c (_initialize_iq2000_tdep): Declare.
4998 * m32c-tdep.c (m32c_register_reggroup_p): Make it static.
4999 (m32c_analyze_prologue, m32c_virtual_frame_pointer): Ditto.
5000 (_initialize_m32c_tdep): Declare.
5001 * m32r-rom.c (_initialize_m32r_rom): Declare.
5002 * m32r-tdep.c (m32r_skip_prologue): Make it static.
5003 (m32r_return_value): Ditto.
5004 * m68hc11-tdep.c (m68hc11_frame_unwind_cache): Make it static.
5005 (m68hc11_return_value): Ditto.
5006 * m68klinux-tdep.c (_initialize_m68k_linux_tdep): Declare.
5007 * m88k-tdep.c (m88k_frame_cache): Make it static.
5008 * mep-tdep.c (mep_gdb_print_insn): Ditto.
5009 (mep_return_value): Ditto.
5010 (_initialize_mep_tdep): Declare.
5011 * mips-irix-tdep.c (_initialize_mips_irix_tdep): Declare.
5012 * mips-linux-tdep.c (supply_64bit_reg): Make it static.
5013 (mips_linux_syscall_next_pc): Ditto.
5014 (_initialize_mips_linux_tdep): Declare.
5015 * mips-tdep.c (mips_single_step_through_delay): Make it static.
5016 * mipsnbsd-tdep.c (_initialize_mipsnbsd_tdep): Declare.
5017 * mn10300-linux-tdep.c (_initialize_mn10300_linux_tdep): Declare.
5018 * mn10300-tdep.c (_initialize_mn10300_tdep): Declare.
5019 * mt-tdep.c (_initialize_mt_tdep): Declare.
5020 * nbsd-tdep.c: Include nbsd-tdep.h.
5021 * nto-tdep.c (find_load_phdr): Make it static.
5022 (_initialize_nto_tdep): Declare.
5023 * ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Make it
5025 (_initialize_ppc_linux_tdep): Declare.
5026 * remote-m32r-sdi.c (m32r_can_use_hw_watchpoint)
5027 (m32r_insert_watchpoint, m32r_remove_watchpoint)
5028 (m32r_stopped_data_address, m32r_stopped_by_watchpoint): Make
5030 * rs6000-aix-tdep.c (_initialize_rs6000_aix_tdep): Declare.
5031 * rs6000-nat.c: Include xcoffread.h.
5032 (find_toc_address): Don't extern declare get_toc_offset. Adjust
5033 to call xcoff_get_to_offset.
5034 * rs6000-tdep.c (ppc_vsx_support_p, ppc_displaced_step_fixup)
5035 (rs6000_skip_main_prologue, rs6000_in_solib_return_trampoline)
5036 (rs6000_skip_trampoline_code): Make static.
5037 * s390-tdep.c (s390_regset_from_core_section): Ditto.
5038 * sh-tdep.c (sh_register_reggroup_p): Ditto.
5039 * shnbsd-tdep.c (shnbsd_regset_from_core_section): Ditto.
5040 (_initialize_shnbsd_tdep): Declare.
5041 * solib-frv.c (displacement_from_map): Make static.
5042 (_initialize_frv_solib): Declare.
5043 * solib-irix.c (fetch_lm_info): Make static.
5044 (_initialize_irix_solib): Declare.
5045 * solib-som.c: Include solib-som.h.
5046 (som_solib_select): Line break.
5047 * sparc-tdep.c (sparc_regset_from_core_section): Make static.
5048 * sparcnbsd-tdep.c (_initialize_sparnbsd_tdep): Rename to ...
5049 (_initialize_sparcnbsd_tdep): ... this.
5050 * spu-tdep.c (spu_software_single_step): Make it static.
5051 (_initialize_spu_tdep): Declare.
5052 * vax-tdep.c (vax_frame_cache): Make it static.
5053 * xcoffread.c: Include xcoffread.h.
5054 (get_toc_offset): Rename to ...
5055 (xcoff_get_toc_offset): ... this.
5056 (_initialize_xcoffread): Declare.
5058 * xtensa-linux-tdep.c (_initialize_xtensa_linux_tdep): Declare.
5059 * xtensa-tdep.c (xtensa_skip_prologue, xtensa_derive_tdep): Make
5061 (_initialize_xtensa_tdep): Declare.
5063 2008-02-21 Pedro Alves <pedro@codesorcery.com>
5065 Silence a few -Wmissing-prototypes warnings.
5068 * amd64-nat.c: Include "amd64-nat.h".
5069 * fork-child.c (_initialize_fork_child): Ditto.
5070 * gcore.c (_initialize_gcore): Ditto.
5071 * inf-ptrace.c: Include "inf-ptrace.h".
5072 (inf_ptrace_store_registers): Make it static.
5073 * linux-nat.c (linux_nat_terminal_ours): Make it static.
5074 (_initialize_linux_nat): Declare before definition.
5075 * linux-tdep.c: Include "linux-tdep.h".
5076 * linux-thread-db.c (_initialize_thread_db): Declare before
5078 * proc-service.c (_initialize_proc_service): Ditto.
5079 * remote.c (remote_send_printf): Make it static.
5080 * solib.c: Include "solib.h".
5081 * symfile-mem.c (_initialize_symfile_mem): Declare before
5083 * ada-lang.c (ada_la_decode, ada_match_name)
5084 (ada_suppress_symbol_printing, ada_is_array_type)
5085 (ada_value_ptr_subscript, ada_array_length)
5086 (ada_to_static_fixed_value): Make them static.
5087 (_initialize_ada_language): Declare before definition.
5088 * ada-tasks.c (ada_get_task_number, ada_get_environment_task)
5089 (ada_task_list_changed, ada_new_objfile_observer): Make them
5091 (_initialize_tasks): Declare before definition.
5092 * addrmap.c (_initialize_addrmap): Declare before definition.
5093 * auxv.c (default_auxv_parse): Make it static.
5094 * bfd-target.c (target_bfd_xfer_partial, target_bfd_xclose): Make
5096 * breakpoint.c (remove_sal): Add line break.
5097 (expand_line_sal_maybe): Make it static.
5098 * cp-name-parser.y: Include "cp-support.h".
5099 * cp-valprint.c (cp_find_class_member): Make it static.
5100 * eval.c (value_f90_subarray): Ditto.
5101 * exceptions.c (print_any_exception): Ditto.
5102 * findcmd.c (_initialize_mem_search): Declare before definition.
5103 * frame.c (frame_observer_target_changed): Make it static.
5104 * gnu-v3-abi.c (gnuv3_find_method_in): Make it static.
5105 * inf-child.c: Include "inf-child.h".
5106 * inferior.h (valid_inferior_id): Rename to ...
5107 (valid_gdb_inferior_id): ... this.
5108 * infrun.c (infrun_thread_stop_requested, siginfo_make_value):
5110 * jv-lang.c (java_language_arch_info): Make it static.
5111 * m2-typeprint.c (m2_get_discrete_bounds): Ditto.
5112 * osdata.c (info_osdata_command): Make it static.
5113 * regcache.c (regcache_observer_target_changed): Make it static.
5114 * reverse.c (_initialize_reverse): Declare before definition.
5115 * stabsread.c (cleanup_undefined_types_noname)
5116 (cleanup_undefined_types_1): Make them static.
5117 * symfile.c (place_section): Make it static.
5118 * symtab.c (find_pc_sect_psymtab_closer): Make it static.
5119 * target-descriptions.c (_initialize_target_descriptions): Declare
5121 * target.c (default_get_ada_task_ptid, find_default_can_async_p)
5122 (find_default_is_async_p, find_default_supports_non_stop): Make
5124 (target_supports_non_stop): Add prototype.
5125 (dummy_pid_to_str): Make it static.
5126 * utils.c (_initialize_utils): Declare before definition.
5127 * ada-exp.y (_initialize_ada_exp): Declare before definition.
5128 * solib-svr4.c (HAS_LM_DYNAMIC_FROM_LINK_MAP): Add a prototype.
5129 * target.h (struct target_ops): Add a prototype to the
5130 to_can_execute_reverse callback.
5131 * macroscope.c (_initialize_macroscope): Declare before definition.
5132 * cp-namespace.c (_initialize_cp_namespace): Declare before definition.
5133 * python/python.c (_initialize_python): Declare before definition.
5134 * tui/tui-command.c: Include "tui/tui-command.h".
5135 * tui/tui-data.c (init_content_element, init_win_info): Make them
5137 * tui/tui-disasm.c: Include "tui/tui-disasm.h".
5138 * tui/tui-interp.c (_initialize_tui_interp): Declare before
5140 * tui/tui-layout.c: Include "tui/tui-layout.h".
5141 (_initialize_tui_layout): Declare before definition.
5142 * tui/tui-regs.c: Include "tui/tui-regs.h".
5143 (tui_display_reg_element_at_line): Make it static.
5144 (_initialize_tui_regs): Declare before definition.
5145 * tui/tui-stack.c (_initialize_tui_stack): Declare before
5147 * tui/tui-win.c: Include "tui/tui-win.h".
5148 (_initialize_tui_win): Declare before definition.
5149 (tui_sigwinch_handler): Make it static. Wrap in ifdef SIGWINCH.
5150 * tui/tui-win.h (tui_sigwinch_handler): Delete declaration.
5151 (tui_get_cmd_list): Add a prototype.
5152 * tui/tui-windata.c: Include tui-windata.h.
5153 * tui/tui-wingeneral.c (box_win): Make it static.
5154 * cli/cli-logging.c (show_logging_command): Make it static.
5155 (_initialize_cli_logging): Declare before definition.
5156 * mi/mi-common.c (_initialize_gdb_mi_common): Declare before
5159 2009-02-20 Pierre Muller <muller@ics.u-strasbg.fr>
5161 Extend use of i386_use_watchpoints to all i386 native files
5162 using hardware watchpoints.
5163 * go32-nat.c (init_go32_ops): Call i386_use_watchpoints.
5164 * i386fbsd-nat.c (_initialize_i386fbsd_nat): Ditto.
5165 * windows-nat.c (init_windows_ops): Ditto.
5166 * config/i386/nm-cygwin.h: Define I386_WATCHPOINTS_IN_TARGET_VECTOR.
5167 * config/i386/nm-cygwin64.h: Ditto.
5168 * config/i386/nm-fbsd.h: Ditto.
5169 * config/i386/nm-go32.h: Ditto.
5171 2009-02-19 Joel Brobecker <brobecker@adacore.com>
5173 * ada-typeprint.c (ada_typedef_print): Remove. Unused.
5175 2009-02-18 Vladimir Prus <vladimir@codesourcery.com>
5177 * mi/mi-interp.c (mi_solib_loaded, mi_solib_unloaded): New.
5178 (mi_interpreter_init): Register the above.
5179 * solib.c (clear_solib): Notify solib unload.
5180 * breakpoint.c (disable_breakpoints_in_unloaded_shlib): Do not
5181 disable breakpoints on a.out targets.
5183 2009-02-17 Vladimir Prus <vladimir@codesourcery.com>
5185 * observer.c (observer_test_first_notification_function)
5186 (observer_test_second_notification_function)
5187 (observer_test_third_notification_function): Adjust prototype.
5189 2009-02-17 Pedro Alves <pedro@codesourcery.com>
5191 * Makefile.in (ALL_64_TARGET_OBS): Add amd64-dicos-tdep.o.
5192 (ALL_TARGET_OBS): Add dicos-tdep.o.
5193 (ALLDEPFILES): Add amd64-dicos-tdep.c and dicos-tdep.c.
5194 * configure.tgt (i[34567]86-*-dicos*): Add dicos-tdep.o to
5196 (x86_64-*-dicos*): Add dicos-tdep.o and amd64-dicos-tdep.o to
5198 * dicos-tdep.h, dicos-tdep.c: New.
5199 * amd64-dicos-tdep.c: New.
5200 * i386-dicos-tdep.c: Don't include solib.h, solib-target.h or
5201 inferior.h. Include dicos-tdep.h.
5202 (i386_dicos_init_abi): Call dicos_init_abi.
5203 (i386_dicos_bfd_has_symbol_p): Delete.
5204 (i386_dicos_osabi_sniffer): Use dicos_load_module_p.
5206 * NEWS: Mention x86-64 DICOS target support.
5208 2009-02-16 Doug Evans <dje@google.com>
5210 * amd64-tdep.c (amd64_skip_prefixes): Renamed from skip_prefixes.
5211 All callers updated.
5212 (amd64_get_insn_details): Handle more 3-byte opcode insns.
5213 (amd64_breakpoint_p): Delete.
5214 (amd64_displaced_step_fixup): When fixing up after stepping an int3,
5215 don't back up pc to the start of the int3.
5216 * i386-tdep.c: #include opcode/i386.h.
5217 (i386_skip_prefixes): New function.
5218 (i386_absolute_jmp_p): Constify argument.
5219 (i386_absolute_call_p,i386_ret_p,i386_call_p,i386_syscall_p): Ditto.
5220 (i386_breakpoint_p): Delete.
5221 (i386_displaced_step_fixup): Handle unnecessary or redundant prefixes.
5222 When fixing up after stepping an int3, don't back up pc to the start
5225 2009-02-16 Pedro Alves <pedro@codesourcery.com>
5227 * corelow.c (core_close): Don't hardcode the core's pid.
5228 (core_open): Find core threads before calling
5229 post_create_inferior.
5230 (add_to_thread_list, get_core_register_section): Take into account
5231 systems where the regset section names encode the pid of the
5234 * gdbarch.sh (core_reg_section_encodes_pid): New gdbarch setting.
5235 * gdbarch.h, gdbarch.c: Regenerate.
5237 * amd64-sol2-tdep.c (amd64_sol2_init_abi): Set it.
5238 * i386-sol2-tdep.c (i386_sol2_init_abi): Set it.
5239 * sparc-sol2-tdep.c (sparc32_sol2_init_abi): Set it.
5240 * sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Set it.
5242 2009-02-14 Vladimir Prus <vladimir@codesourcery.com>
5244 Include frame information for *stopped due to CLI commands.
5246 * ada-tasks.c (ada_normal_stop_observer): Adjust prototype.
5247 * infcmd.c (finish_command_continuation): Pass '1' for
5248 'print_frame' parameter to the observer.
5249 * infrun.c (normal_stop): Don't print mi-specific information
5250 here. Pass 'stop_print_frame' to the 'print_frame' parameter
5252 * mi/mi-interp.c (mi_on_normal_stop): Adjust prototype.
5253 If we need to print frame, and current uiout is not the MI one,
5256 2009-02-13 Pierre Muller <muller@ics.u-strasbg.fr>
5258 * xtensa-tdep.c (call0_analyze_prologue): Delete BSZ macro.
5259 Replace BSZ macro uses by XTENSA_ISA_BSZ macro.
5261 2009-02-12 Jan Kratochvil <jan.kratochvil@redhat.com>
5264 * dwarf2read.c (process_die <DW_TAG_module>, read_module)
5265 (scan_partial_symbols <DW_TAG_module>, add_partial_module): New.
5267 2009-02-11 Pierre Muller <muller@ics.u-strasbg.fr>
5269 * dwarf2read.c (read_base_type): Set code to TYPE_CODE_CHAR
5270 for DW_ATE_signed_char and DW_ATE_unsigned_char
5271 for pascal language.
5273 2009-02-11 Jim Meyering <meyering@redhat.com>
5274 Jan Kratochvil <jan.kratochvil@redhat.com>
5276 Avoid NULL dereference.
5277 * stack.c (return_command): Guard use of SYMBOL_TYPE (thisfun).
5278 New variable func_type.
5280 2009-02-11 Pedro Alves <pedro@codesourcery.com>
5282 * gdbarch.c: Regenerate.
5284 2009-02-10 Pierre Muller <muller@ics.u-strasbg.fr>
5286 * p-lang.c (is_pascal_string_type): Fix comment.
5287 Determine exact size of char elements for GPC
5289 (pascal_printstr): Handle char width of 2 or 4.
5290 * p-valprint.c (pascal_val_print): Handle char
5293 2009-02-07 Daniel Jacobowitz <dan@codesourcery.com>
5295 * dwarf2read.c (dwarf2_build_psymtabs_hard): Move lowpc and highpc
5296 inside the loop. Only call addrmap_set_empty if the compilation unit
5297 had DW_AT_high_pc and DW_AT_low_pc. Update call to
5298 scan_partial_symbols.
5299 (scan_partial_symbols): Take NEED_PC argument and pass it along with
5301 (add_partial_namespace): Take NEED_PC argument and pass it through.
5302 (add_partial_subprogram): Take NEED_PC argument. Update the addrmap
5305 2009-02-07 Pedro Alves <pedro@codesourcery.com>
5307 * NEWS: Mention inspecting extra signal information, $_siginfo,
5308 and the qXfer:siginfo:read and qXfer:siginfo:write packets.
5310 2009-02-07 Pedro Alves <pedro@codesourcery.com>
5312 * linux-nat.c (PTRACE_SETSIGINFO): Define if PTRACE_GETSIGINFO
5315 2009-02-06 Pedro Alves <pedro@codesourcery.com>
5317 * amd64-linux-nat.c (compat_int_t, compat_uptr_t, compat_time_t)
5318 (compat_timer_t, compat_clock_t, struct compat_timeval)
5319 (compat_sigval_t, compat_siginfo_t): New types.
5320 (cpt_si_pid, cpt_si_uid, cpt_si_timerid, cpt_si_overrun)
5321 (cpt_si_status, cpt_si_utime, cpt_si_stime, cpt_si_ptr)
5322 (cpt_si_addr, cpt_si_band, cpt_si_fd): New defines.
5323 (compat_siginfo_from_siginfo, siginfo_from_compat_siginfo)
5324 (amd64_linux_siginfo_fixup): New.
5325 * linux-nat.c (linux_nat_siginfo_fixup): New.
5326 (siginfo_fixup): New.
5327 (linux_xfer_siginfo): Use siginfo_fixup to convert between the
5328 siginfo layout expected by ptrace and the siginfo layout of the
5330 (linux_nat_set_siginfo_fixup): New.
5331 * linux-nat.h (linux_nat_set_siginfo_fixup): Declare.
5333 2009-02-06 Pedro Alves <pedro@codesourcery.com>
5335 * target.h (enum target_object): Add new TARGET_OBJECT_SIGNAL_INFO.
5336 * infrun.c (siginfo_value_read, siginfo_value_write): New.
5337 (siginfo_value_funcs): New.
5338 (siginfo_make_value): New.
5339 (_initialize_infrun): Create the $_siginfo convenience variable.
5340 * gdbtypes.h (append_composite_type_field_aligned): Declare.
5341 * gdbtypes.c (append_composite_type_field): Rename to...
5342 (append_composite_type_field_aligned): ... this. Add ALIGNMENT
5343 argument. Handle it.
5344 (append_composite_type_field): Rewrite on top of
5345 append_composite_type_field_aligned.
5346 * value.h (internalvar_make_value): New typedef.
5347 (struct internalvar) <make_value>: New field.
5348 (create_internalvar_type_lazy): Declare.
5349 * value.c (create_internalvar): Clear make_value.
5350 (create_internalvar_type_lazy): New.
5351 (value_of_internalvar): If make_value is set use it.
5352 (preserve_values): Skip internal variables that don't have a
5354 * gdbarch.sh (get_siginfo_type): New.
5355 * gdbarch.h, gdbarch.c: Regenerate.
5357 * linux-tdep.h, linux-tdep.c: New.
5358 * amd64-linux-tdep.c: Include "linux-tdep.h".
5359 (amd64_linux_init_abi): Register linux_get_siginfo_type and
5360 linux_get_siginfo_mapper.
5361 * i386-linux-tdep.c: Include "linux-tdep.h".
5362 (i386_linux_init_abi): Register linux_get_siginfo_type and
5363 linux_get_siginfo_mapper.
5364 * arm-linux-tdep.c: Include "linux-tdep.h".
5365 (i386_linux_init_abi): Register linux_get_siginfo_type and
5366 linux_get_siginfo_mapper.
5368 * linux-nat.c (linux_xfer_siginfo): New.
5369 (linux_nat_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO.
5370 * remote.c (PACKET_qXfer_siginfo_read)
5371 (PACKET_qXfer_siginfo_write): New.
5372 (feature remote_protocol_features): Add "qXfer:siginfo:read" and
5373 "qXfer:siginfo:write" features.
5374 (remote_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO.
5375 (_initialize_remote): Add "set/show remote read-siginfo-object"
5376 and "set/show remote write-siginfo-object" commands.
5378 * Makefile.in (ALL_TARGET_OBS): Add linux-tdep.o.
5379 (HFILES_NO_SRCDIR): Add linux-tdep.h.
5380 (ALLDEPFILES): Add linux-tdep.c.
5382 * configure.tgt (arm*-*-linux* | arm*-*-uclinux*)
5383 (i[34567]86-*-linux*, x86_64-*-linux*): Add linux-tdep.o to
5386 2009-02-06 Jim Blandy <jimb@codesourcery.com>
5387 Daniel Jacobowitz <dan@codesourcery.com>
5388 Vladimir Prus <vladimir@codesourcery.com>
5389 Pedro Alves <pedro@codesourcery.com>
5391 * defs.h (enum lval_type): New value: lval_computed.
5392 * value.h (struct lval_funcs): New type.
5393 (allocate_computed_value, value_computed_funcs)
5394 (value_computed_closure): New declarations.
5395 * value.c (struct value): Add a structure to the location union
5396 for computed lvalues, containing 'funcs' and 'closure' members.
5397 (allocate_computed_value, value_computed_funcs)
5398 (value_computed_closure): New functions.
5399 (value_free): For computed lvalues, call the closure's
5400 'free_closure' function before freeing the value itself.
5401 (value_copy): If we're copying an lval_computed value, call the
5402 closure's 'copy_closure' function.
5403 (set_value_component_location): If the original value is a
5404 computed lvalue, then call the closure's 'copy_closure' function.
5405 (value_of_internalvar): If an internal variable's value is a
5406 computed lvalue, make retrieving its value produce an equivalent
5408 * valops.c (value_fetch_lazy): Unlazy computed lvalues by calling
5409 their read function.
5410 (value_assign): Assign to computed lvalues by calling their write
5413 2009-02-06 Pedro Alves <pedro@codesourcery.com>
5415 * linux-nat.c (linux_nat_wait): Adjust.
5416 (linux_nat_pid_to_str): Adjust. Remove call to thread_db_init.
5417 * linux-nat.h (thread_db_init): Delete declaration.
5418 * linux-thread-db.c (target_beneath): Delete.
5419 (thread_db_init): Delete.
5420 (thread_db_detach): Use find_target_beneath.
5421 (thread_db_wait): Adjust interface. Use find_target_beneath.
5422 (thread_db_mourn_inferior): Use find_target_beneath.
5423 (thread_db_can_async_p, thread_db_is_async_p, thread_db_async)
5424 (thread_db_async_mask): Delete.
5425 (thread_db_pid_to_str): Adjust interface. Use
5426 find_target_beneath.
5427 (thread_db_get_thread_local_address): Adjust interface. Use
5428 find_target_beneath.
5429 (init_thread_db_ops): Delete references to delete functions.
5430 * target.c (update_current_target): Don't inherit or default
5431 to_wait. Don't inherit to_pid_to_str and
5432 to_get_thread_local_address.
5433 (target_translate_tls_address): Look for a pushed target that
5434 implements to_get_thread_local_address, and use it instead of
5435 checking for target_get_thread_local_address_p.
5436 (target_wait, target_pid_to_str): Reimplement as functions.
5437 (dummy_pid_to_str): New.
5438 (init_dummy_target): Register it.
5439 (debug_to_wait): Delete.
5440 * target.h (struct target_ops): Make to_wait, to_pid_to_str and
5441 to_get_thread_local_address accept a pointer to struct target_ops.
5442 (target_wait): Delete macro, and declare as function.
5443 (target_pid_to_str): Likewise.
5444 (target_get_thread_local_address)
5445 (target_get_thread_local_address_p): Delete.
5446 (noprocess): Add NORETURN and ATTR_NORETURN tags.
5447 * inf-ptrace.c (inf_ptrace_wait): Adjust.
5448 (inf_ptrace_pid_to_str): New.
5449 (inf_ptrace_target): Use inf_ptrace_pid_to_str.
5450 * aix-thread.c (aix_thread_wait, aix_thread_pid_to_str): Adjust.
5451 * bsd-kvm.c (bsd_kvm_pid_to_str): Adjust.
5452 * bsd-uthread.c (bsd_uthread_wait, bsd_uthread_pid_to_str):
5454 * corelow.c (core_pid_to_str): Adjust.
5455 * darwin-nat.c (darwin_wait, darwin_pid_to_str): Adjust.
5456 * dec-thread.c (dec_thread_wait, dec_thread_pid_to_str): Adjust.
5457 * gnu-nat.c (gnu_wait, gnu_pid_to_str): Adjust.
5458 * go32-nat.c (go32_wait, go32_pid_to_str): Adjust.
5459 * hpux-thread.c (hpux_thread_wait): Adjust.
5460 * inf-ttrace.c (inf_ttrace_wait, inf_ttrace_pid_to_str): Adjust.
5461 * monitor.c (monitor_wait, monitor_pid_to_str): Adjust.
5462 * nto-procfs.c (procfs_wait, procfs_pid_to_str): Adjust.
5463 * procfs.c (procfs_pid_to_str): Adjust.
5464 * remote-m32r-sdi.c (m32r_wait, m32r_pid_to_str): Adjust.
5465 * remote-mips.c (mips_wait): Adjust.
5466 * remote-sim.c (gdbsim_wait, gdbsim_pid_to_str): Adjust.
5467 * remote.c (remote_wait, remote_pid_to_str)
5468 (remote_get_thread_local_address): Adjust.
5469 * rs6000-nat.c (rs6000_wait): Adjust.
5470 * sol-thread.c (procfs_pid_to_str): Adjust declaration.
5471 (sol_thread_wait, solaris_pid_to_str): Adjust.
5472 * spu-linux-nat.c (spu_child_wait): Adjust.
5473 * windows-nat.c (windows_wait, windows_pid_to_str): Adjust.
5475 2009-02-06 Tom Tromey <tromey@redhat.com>
5477 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-cmd.o.
5478 (SUBDIR_PYTHON_SRCS): Add python-cmd.c.
5479 (python-cmd.o): New target.
5480 * cli/cli-decode.c (set_cmd_completer): Add self parameter to
5481 completer prototype.
5482 (add_cmd): Initialize destroyer member of cmd_list_element. Use
5483 make_symbol_completion_list_fn as completer.
5484 (delete_cmd): Call destroyer if one is set.
5485 * cli/cli-decode.h (cmd_list_element): Add cmd parameter to
5486 completer member. Add destroyer member.
5487 (set_cmd_completer): Add self parameter to
5488 completer prototype.
5489 * command.h (set_cmd_completer): Add cmd parameter to
5490 completer prototype.
5491 * completer.c (noop_completer, filename_completer,
5492 location_completer, expression_completer, command_completer): Adapt
5493 to new completer prototype.
5494 (complete_line_internal): Pass new parameter to completer function.
5495 * completer.h (noop_completer, filename_completer,
5496 location_completer, expression_completer, command_completer): Adapt
5497 prototypes to new completer prototype.
5498 * interps.c (interpreter_completer): Adapt to new completer
5500 * python/python-cmd.c: New file.
5501 * python/python-internal.h (gdbpy_initialize_commands): Add
5503 (gdbpy_doc_cst): Add forward declaration.
5504 * python/python.c (gdbpy_doc_cst): Declare.
5505 (_initialize_python): Call gdbpy_initialize_commands. Initialize
5507 * symtab.c (make_symbol_completion_list_fn): New function.
5508 * symtab.h (make_symbol_completion_list_fn): Add prototype.
5510 2009-02-06 Pedro Alves <pedro@codesourcery.com>
5512 * target.c (target_get_osdata): Check for equal or higher than
5513 process_stratum, not dummy_stratum.
5515 2009-02-06 Pedro Alves <pedro@codesourcery.com>
5517 * remote.c (extended_remote_can_run): Delete.
5518 (init_remote_ops): Don't register it.
5519 * target.c (target_get_osdata): Don't check for target_can_run.
5520 Instead any target that has already been pushed, otherwise
5521 fallback to the default run target.
5523 2009-02-06 Pedro Alves <pedro@codesourcery.com>
5525 * target.c (target_create_inferior, target_detach)
5526 (target_mourn_inferior, target_attach, target_close): Do target
5528 (debug_to_attach, debug_to_detach, debug_to_create_inferior)
5529 (debug_to_mourn_inferior, debug_to_close): Delete.
5530 (setup_target_debug): Adjust.
5532 2009-02-05 Pedro Alves <pedro@codesourcery.com>
5534 * target.h (target_stopped_data_address_p): Delete declaration,
5535 and don't define as macro.
5536 * target.c (target_stopped_data_address_p): Delete.
5538 2009-02-05 Thiago Jung Bauermann <bauerman@br.ibm.com>
5539 Tom Tromey <tromey@redhat.com>
5541 * python/python-utils.c (target_string_to_unicode): New function.
5542 * python/python-internal.h (target_string_to_unicode): New prototype.
5543 * python/python-value.c (valpy_string): New function.
5544 (value_object_methods): Add `string' entry.
5546 2009-02-05 Pedro Alves <pedro@codesourcery.com>
5548 * target.h (target_tid_to_str): Delete.
5549 * thread.c (print_thread_info, thread_apply_all_command)
5550 (thread_apply_command, thread_command, do_captured_thread_select):
5551 Use target_pid_to_str instead of target_tid_to_str.
5552 * linux-fork.c (delete_fork_command): Likewise.
5554 2009-02-05 Pedro Alves <pedro@codesourcery.com>
5556 * frame.c (has_stack_frames): Make public.
5557 (get_prev_frame): Don't allow a NULL this_frame anymore.
5558 * frame.h (has_stack_frames): Declare.
5559 * varobj.c (find_frame_addr_in_frame_chain): Don't ever pass NULL
5560 to get_prev_frame, instead start at get_current_frame.
5561 (varobj_create): Check has_stack_frames before getting any frame;
5562 eliminate one usage of deprecated_safe_get_selected_frame.
5564 2009-02-05 Tom Tromey <tromey@redhat.com>
5565 Thiago Jung Bauermann <bauerman@br.ibm.com>
5567 * python/python.c (GdbMethods): Move to bottom of file.
5568 (get_parameter, execute_gdb_command, gdbpy_write,
5569 gdbpy_flush): Remove forward declarations.
5570 (eval_python_from_control_command): Fix error checking of function
5571 PyRun_SimpleString. Fix error string.
5572 (python_command): Likewise.
5573 (execute_gdb_command): Added from_tty argument.
5575 2009-02-05 Thiago Jung Bauermann <bauerman@br.ibm.com>
5577 * language.h (language_dfn): Add la_get_string member.
5578 (LA_GET_STRING): New macro.
5579 (default_get_string): New prototype.
5580 * language.c (default_get_string): New function.
5581 (unknown_language_defn, auto_language_defn, local_language_defn): Use
5582 default_get_string for la_get_string.
5583 * c-lang.c (c_get_string): New function.
5584 (c_language_defn, cplus_language_defn, asm_language_defn): Use
5585 c_get_string for la_get_string.
5586 (minimal_language_defn): Likewise
5587 * ada-lang.c (ada_language_defn): Likewise.
5588 * f-lang.c (f_language_defn): Use default_get_string for
5590 * jv-lang.c (java_language_defn): Likewise.
5591 * m2-lang.c (m2_language_defn): Likewise.
5592 * objc-lang.c (objc_language_defn): Likewise.
5593 * p-lang.c (p_language_defn): Likewise.
5594 * scm-lang.c (scm_language_defn): Likewise.
5595 * typeprint.c (type_to_string): New function.
5596 * value.h (type_to_string): New prototype.
5597 * valprint.c (val_print_string): Factor out code for reading string
5598 from the inferior into its own function. Put 2 spaces after period
5600 (read_string): New function.
5601 * valprint.h (read_string): New prototype.
5603 2009-01-07 Pierre Muller <muller@ics.u-strasbg.fr>
5604 Tom Tromey <tromey@redhat.com>
5606 PR breakpoints/8079:
5607 * breakpoint.c (print_one_breakpoint): Use exp_string field
5608 to display expression of watchpoints.
5609 (mention): Likewise.
5610 (watch_command_1): Remove trailing whitespace from expression.
5611 * printcmd.c (struct display) <exp_string>: New field.
5612 (display_command): Set exp_string.
5613 (free_display): Free exp_string.
5614 (clear_displays): Use free_display.
5615 (do_one_display): Print exp_string.
5616 (display_info): Likewise.
5618 2009-02-04 Tom Tromey <tromey@redhat.com>
5619 Thiago Jung Bauermann <bauerman@br.ibm.com>
5620 Phil Muldoon <pmuldoon@redhat.com>
5622 * python/python-internal.h (gdbpy_get_value_from_history): Rename
5623 prototype to gdbpy_history.
5624 (gdbpy_is_string): Declare.
5625 (python_string_to_host_string): Declare.
5626 * python/python-utils.c (gdbpy_is_string): New function.
5627 (unicode_to_encoded_string): New function.
5628 (unicode_to_target_string): Use it.
5629 (python_string_to_host_string): New function.
5630 * python/python-value.c (valpy_address): New function.
5631 (convert_value_from_python): Use gdbpy_is_string. Change to throw
5632 Python exception instead of a GDB exception on error. Properly check
5634 (valpy_getitem): Convert field name to host string. Handle array
5635 accesses. Adapt to new behaviour of convert_value_from_python.
5636 (valpy_new): Adapt to new behaviour of convert_value_from_python.
5637 (enum valpy_opcode) <VALPY_LSH, VALPY_RSH, VALPY_BITAND,
5638 VALPY_BITXOR, VALPY_BITOR>: New constants.
5639 (valpy_binop): Update. Adapt to new behaviour of
5640 convert_value_from_python.
5641 (valpy_invert): New function.
5642 (valpy_lsh): Likewise.
5643 (valpy_rsh): Likewise.
5644 (valpy_and): Likewise.
5645 (valpy_or): Likewise.
5646 (valpy_xor): Likewise.
5647 (valpy_richcompare): Call convert_value_from_python instead of doing
5649 (is_intlike, valpy_int, valpy_long, valpy_float): New functions.
5650 (gdbpy_get_value_from_history): Rename
5651 function to gdbpy_history.
5652 (gdbpy_initialize_values): Don't set tp_new.
5653 (value_object_type): Add valpy_new.
5654 (value_object_methods): Add `address' entry.
5655 (value_object_as_number): Update for new methods.
5656 * python/python.c (GdbMethods): Rename entry from
5657 `get_value_from_history' to `history'.
5659 2009-02-04 Jerome Guitton <guitton@adacore.com>
5661 * ada-lang.c (ada_template_to_fixed_record_type_1): Check size
5662 of type to guard against a crash.
5664 2009-02-04 Jerome Guitton <guitton@adacore.com>
5666 * value.c (value_from_contents_and_address): Always return
5667 a lval_memory value, even if address is null.
5669 2009-02-04 Tristan Gingold <gingold@adacore.com>
5671 * i386-darwin-tdep.c (i386_darwin_sigcontext_addr): New function.
5672 (amd64_darwin_sigcontext_addr): Ditto.
5673 (darwin_dwarf_signal_frame_p): Ditto.
5674 (i386_darwin_init_abi): Handle signal frames, use the const for
5676 (x86_darwin_init_abi_64): Ditto.
5678 2009-02-04 Tristan Gingold <gingold@adacore.com>
5680 * i386-tdep.c (i386_sigtramp_p): Make it public.
5681 * i386-tdep.h (i386_sigtramp_p): Declare.
5683 2009-02-04 Tristan Gingold <gingold@adacore.com>
5685 * machoread.c (macho_symfile_read): Read minsymtab also from
5687 (macho_symfile_read): Try to read dwarf2 frame info from main
5688 object file, but not from OSO files.
5689 (macho_symfile_offsets): Update section names for latest BFD
5691 * i386-darwin-tdep.c (i386_darwin_init_abi): Call set_solib_ops.
5692 (x86_darwin_init_abi_64): Ditto.
5693 * solib-darwin.c: New file.
5694 * solib-darwin.h: New file.
5695 * configure.tgt: Add solib.o solib-darwin.o for Darwin.
5697 2009-02-04 Tristan Gingold <gingold@adacore.com>
5699 * solist.h (struct target_so_ops): Comment fallback behavior for
5702 2009-02-03 Tom Tromey <tromey@redhat.com>
5704 * completer.c (add_struct_fields): Check type_name against NULL
5707 2009-02-03 Joel Brobecker <brobecker@adacore.com>
5709 * MAINTAINERS: Update Elena's email address.
5711 2009-02-02 Joel Brobecker <brobecker@adacore.com>
5713 * breakpoint (update_watchpoint): Minor comment adjustment.
5715 2009-02-02 Tom Tromey <tromey@redhat.com>
5718 * completer.c (count_struct_fields): Count method names.
5719 (add_struct_fields): Add matching method names.
5721 2009-02-02 Doug Evans <dje@google.com>
5723 * configure.ac (gdbkt): Check both no_tcl/no_tk first, before
5724 doing any further tcl/tk configury. Don't configure gdbtk if
5725 tcl or tk check fails.
5726 * aclocal.m4: Regenerate.
5727 * configure: Regenerate.
5729 2009-02-02 Tom Tromey <tromey@redhat.com>
5732 * valops.c (find_overload_match): Follow typedefs before taking
5733 address of object argument.
5735 2009-02-01 Doug Evans <dje@google.com>
5737 * target.h (target_waitstatus_to_string): Declare.
5738 * target.c (target_waitstatus_to_string): New function. Copied from
5739 debug_to_wait. Add missing entries for TARGET_WAITKIND_SYSCALL_ENTRY,
5740 TARGET_WAITKIND_SYSCALL_RETURN, TARGET_WAITKIND_IGNORE,
5741 TARGET_WAITKIND_NO_HISTORY.
5742 (debug_to_wait): Call it.
5743 * infrun.c (wait_for_inferior): If debug_infrun, print result of
5745 (fetch_inferior_event): Ditto.
5747 2009-01-30 Tom Tromey <tromey@redhat.com>
5749 * Makefile.in (HFILES_NO_SRCDIR): Remove i386-cygwin-tdep.h.
5751 2009-01-30 Vladimir Prus <vladimir@codesourcery.com>
5754 * thread.c (do_captured_list_thread_ids): Report the current
5757 2009-01-30 Vladimir Prus <vladimir@codesourcery.com>
5759 * breakpoint.c (create_breakpoint, create_breakpoints)
5760 (break_command_really, set_breakpoint): New parameter enabled.
5761 (create_breakpoint, break_command_really): Make breakpoint
5762 disabled if so requested.
5763 * breakpoint.h (set_breakpoint): New parameter enabled.
5764 * mi/mi-cmd-break.c (mi_cmd_break_insert): Handle the -d option.
5766 2009-01-28 Doug Evans <dje@google.com>
5768 * amd64-tdep.h (amd64_displaced_step_copy_insn): Declare.
5769 (amd64_displaced_step_fixup): Declare.
5770 * amd64-tdep.c: #include opcode/i386.h, dis-asm.h.
5771 (amd64_arch_regmap): Move out of amd64_analyze_stack_align
5772 and make static global.
5773 (amd64_arch_regmap_len): New static global.
5774 (amd64_arch_reg_to_regnum): New function.
5775 (struct amd64_insn): New struct.
5776 (struct displaced_step_closure): New struct.
5777 (onebyte_has_modrm,twobyte_has_modrm): New static globals.
5778 (rex_prefix_p,skip_prefixes)
5779 (amd64_insn_length_fprintf,amd64_insn_length_init_dis)
5780 (amd64_insn_length,amd64_get_unused_input_int_reg)
5781 (amd64_get_insn_details,fixup_riprel,fixup_displaced_copy)
5782 (amd64_displaced_step_copy_insn)
5783 (amd64_absolute_jmp_p,amd64_absolute_call_p,amd64_ret_p)
5784 (amd64_call_p,amd64_breakpoint_p,amd64_syscall_p)
5785 (amd64_displaced_step_fixup): New functions.
5786 * amd64-linux-tdep.c: #include arch-utils.h.
5787 (amd64_linux_init_abi): Install displaced stepping support.
5789 2009-01-28 Daniel Jacobowitz <dan@codesourcery.com>
5790 Jerome Guitton <guitton@adacore.com>
5792 * configure, config.in: Regenerated.
5793 * configure.ac: Add --with-system-gdbinit.
5794 * main.c (get_init_files): New.
5795 (captured_main): Use get_init_files. Load system gdbinit before
5797 (print_gdb_help): Print location of init files.
5799 2009-01-28 Pedro Alves <pedro@codesourcery.com>
5801 * corefile.c (generic_search): Delete disabled code.
5802 * gdbcore.h (generic_search): Delete declaration.
5804 2009-01-26 Pedro Alves <pedro@codesourcery.com>
5806 * linux-nat.c (linux_child_follow_fork): Copy attach_flag from the
5807 parent to the child.
5808 * inf-ttrace.c (inf_ttrace_follow_fork): Likewise.
5809 * inf-ptrace.c (inf_ptrace_follow_fork): Likewise. Use
5810 remove_breakpoints to remove breakpoints from the parent.
5812 2009-01-26 Pedro Alves <pedro@codesourcery.com>
5814 PR backtrace/9458, PR backtrace/8864:
5815 * frame.c (create_new_frame): Update the frame's cached PC before
5816 finding its unwinder. Use frame_id_build to build the new frame's
5818 * stack.c (parse_frame_specification_1): Correct setting ``addrs''
5819 array values from the ``args'' array values.
5821 2009-01-26 Pedro Alves <pedro@codesourcery.com>
5823 * gdbtypes.c (alloc_type, alloc_type_instance, create_range_type)
5824 (create_array_type, create_set_type, init_flags_type)
5825 (copy_type_recursive): Replace pairs of calls to XALLOC and memset
5826 with a call to XZALLOC or XCALLOC, and pairs of calls to
5827 obstack_alloc and memset with a call to OBSTACK_ZALLOC.
5829 2009-01-26 Pedro Alves <pedro@codesourcery.com>
5831 Add "maint set|show internal-error|internal-warning quit|corefile
5832 ask|yes|no" commands.
5835 * utils.c (internal_problem_ask, internal_problem_yes)
5836 (internal_problem_no, internal_problem_modes): New.
5837 (struct internal_problem): Remove FIXME. Make should_quit and
5838 should_dump_core types to char *.
5839 (internal_vproblem, internal_error_problem)
5840 (internal_warning_problem): Adjust.
5841 (set_internal_problem_cmd, show_internal_problem_cmd): New dummy
5843 (add_internal_problem_command): New.
5844 (_initialize_utils): New.
5846 2009-01-25 Pedro Alves <pedro@codesourcery.com>
5848 * infcmd.c (program_info): Use paddress instead of casting stop_pc
5851 2009-01-24 Pedro Alves <pedro@codesourcery.com>
5853 * infrun.c (normal_stop): Don't call
5854 deprecated_update_frame_pc_hack.
5855 * frame.c (deprecated_update_frame_pc_hack)
5856 (deprecated_update_frame_base_hack): Delete, and ...
5857 (create_new_frame): ... inline here.
5858 * frame.h (deprecated_update_frame_pc_hack)
5859 (deprecated_update_frame_base_hack): Delete declarations.
5861 2009-01-23 Pedro Alves <pedro@codesourcery.com>
5863 * cli/cli-decode.c (add_setshow_zuinteger_cmd): New.
5864 * cli/cli-setshow.c (do_setshow_command): Handle it.
5865 * command.h (enum var_types): Add var_zuinteger.
5866 (add_setshow_zuinteger_cmd): Declare.
5868 * valprint.c (_initialize_valprint): Change the set input-radix
5869 and set output-radix commands to zuinteger type.
5871 2009-01-23 Pedro Alves <pedro@codesourcery.com>
5874 * infrun.c (normal_stop): Tag threads as stopped, and run the
5875 hook-stop before printing the stack frame.
5877 2009-01-22 Pedro Alves <pedro@codesourcery.com>
5880 * gnu-v3-abi.c (gnuv3_baseclass_offset): Call check_typedef on
5883 2009-01-20 Kazu Hirata <kazu@codesourcery.com>
5885 * gdb/procfs.c (info_mappings_callback): Cast map->pr_size to
5888 2009-01-20 Daniel Jacobowitz <dan@codesourcery.com>
5891 * infcmd.c (signal_command): Do not specify a resume PC.
5893 2009-01-19 Doug Evans <dje@google.com>
5895 * dummy-frame.c (dummy_frame): Replace regcache member with
5897 (dummy_frame_push): Replace caller_regcache arg with caller_state.
5898 All callers updated.
5899 (remove_dummy_frame,pop_dummy_frame,lookup_dummy_frame): New fns.
5900 (dummy_frame_pop): Rewrite. Verify requested frame is in the
5901 dummy frame stack. Restore program state.
5902 (cleanup_dummy_frames): Rewrite.
5903 (dummy_frame_sniffer): Update. Make static.
5904 * dummy-frame.h (regcache,frame_info): Delete forward decls.
5905 (inferior_thread_state): New forward decl.
5906 (dummy_frame_push): Update prototype.
5907 * frame.c (frame_pop): dummy_frame_pop now does all the work for
5909 * infcall.c (breakpoint_auto_delete_contents): Delete.
5910 (get_function_name,run_inferior_call): New fns.
5911 (call_function_by_hand): Simplify by moving some code to
5912 get_function_name, run_inferior_call. Inferior function call wrapped
5913 in TRY_CATCH so there's less need for cleanups and all exits from
5914 proceed are handled similarily. Detect program exit.
5915 Detect program stopping in a different thread.
5916 Make error messages more consistent.
5917 * inferior.h (inferior_thread_state): Declare (opaque type).
5918 (save_inferior_thread_state,restore_inferior_thread_state,
5919 make_cleanup_restore_inferior_thread_state,
5920 discard_inferior_thread_state, get_inferior_thread_state_regcache):
5922 (save_inferior_status): Update prototype.
5923 * infrun.c: (normal_stop): When stopped for the completion of an
5924 inferior function call, verify the expected stack frame kind.
5925 (inferior_thread_state): New struct.
5926 (save_inferior_thread_state,restore_inferior_thread_state,
5927 do_restore_inferior_thread_state_cleanup,
5928 make_cleanup_restore_inferior_thread_state,
5929 discard_inferior_thread_state,
5930 get_inferior_thread_state_regcache): New functions.
5931 (inferior_status): Move stop_signal, stop_pc, registers to
5932 inferior_thread_state. Remove restore_stack_info.
5933 (save_inferior_status): Remove arg restore_stack_info.
5934 All callers updated. Remove saving of state now saved by
5935 save_inferior_thread_state.
5936 (restore_inferior_status): Remove restoration of state now done by
5937 restore_inferior_thread_state.
5938 (discard_inferior_status): Remove freeing of registers, now done by
5939 discard_inferior_thread_state.
5941 2009-01-18 Pedro Alves <pedro@codesourcery.com>
5943 * tui/tui-disasm.c (tui_vertical_disassem_scroll): Scroll one line
5944 at a time, times NUM_TO_SCROLL.
5945 * tui/tui-winsource.c (tui_horizontal_source_scroll): Don't try to
5946 fetch the selected frame if there is no stack.
5948 2009-01-18 Pedro Alves <pedro@codesourcery.com>
5951 * gdbthread.h (finish_thread_state, finish_thread_state_cleanup):
5953 * thread.c (finish_thread_state, finish_thread_state_cleanup): New.
5954 * infrun.c (wait_for_inferior, fetch_inferior_event): If an error
5955 is thrown while handling an event, finish the thread state.
5956 (normal_stop): Use finish_thread_state cleanup.
5957 * infcmd.c (run_command_1): If an error is thrown while starting
5958 the inferior, finish the thread state.
5960 2009-01-18 Pedro Alves <pedro@codesourcery.com>
5962 * tui/tui-winsource.c (tui_update_breakpoint_info): In asm layout,
5963 skip breakpoints without a location (pending breakpoints).
5965 2009-01-18 Pedro Alves <pedro@codesourcery.com>
5968 * hppa-hpux-tdep.c (hppa_hpux_write_pc): Remove 'return'.
5970 2009-01-18 Nick Roberts <nickrob@snap.net.nz>
5972 * thread.c (thread_command): Move call to annotate_thread_changed
5974 (do_captured_thread_select): ... here, to avoid printing an
5975 annotation if the thread change generates an exception.
5977 2009-01-16 Joel Brobecker <brobecker@adacore.com>
5979 * NEWS: Document x86_64/MinGW as a new native configuration.
5981 2009-01-16 Joel Brobecker <brobecker@adacore.com>
5983 * NEWS: Move the documentation of "info os processes" to
5984 the appropriate section (documenting the new commands).
5986 2009-01-15 Doug Evans <dje@google.com>
5988 * target.h (target_signal_to_string): Make return type const char *.
5989 (target_signal_to_name): Ditto.
5990 (target_signal_from_name): Make arg const char *.
5991 * infrun.c (sig_print_info): Update.
5992 * signals/signals.c (signals): Make array and struct members const.
5993 (target_signal_to_string): Make return type const char *.
5994 (target_signal_to_name): Ditto.
5995 (target_signal_from_name): Make arg const char *.
5997 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
5998 Tristan Gingold <gingold@adacore.com>
6000 * solist.h (struct target_so_ops): New member bfd_open.
6001 (solib_find): Add prototype.
6002 (solib_bfd_fopen): Add prototype.
6003 * solib.c (solib_find, solib_bfd_fopen): New functions, extracted
6004 from solib_bfd_open.
6005 (solib_bfd_open): Use ops->bfd_open override if present. Call
6006 solib_find and solib_bfd_open otherwise.
6008 * objfiles.h (OBJF_KEEPBFD): New define.
6009 * objfiles.c (free_objfile): Do not close BFD if OBJF_KEEPBFD
6010 objfile flag is set.
6011 * solib.c (symbol_add_stub): Do not allocate second BFD for
6012 shared library; use OBJF_KEEPBFD flag on solib objfile.
6014 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
6016 * frame.c (get_frame_arch): Abort if called with NULL this_frame.
6018 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
6020 * value.h (address_of_variable): Add prototype.
6021 (locate_var_value): Remove prototype.
6023 * findvar.c (read_var_value): Do not attempt to default frame
6025 (locate_var_value): Remove function.
6026 * valops.c (value_of_variable): Retrieve selected frame for
6027 symbols that require a frame when called with NULL block.
6028 * valops.c (address_of_variable): New function.
6030 * eval.c (evaluate_subexp_for_address): Call address_of_variable
6031 instead of calling locate_var_value.
6032 (evaluate_subexp_with_coercion): Likewise.
6034 2009-01-14 Daniel Jacobowitz <dan@codesourcery.com>
6036 * NEWS: Document "define" for prefixed commands.
6037 * cli/cli-cmds.c (show_user): Update calls to show_user_1. Call
6038 show_user_1 for prefix commands.
6039 * cli/cli-decode.c (help_cmd_list): Recurse for "help user-defined".
6040 * cli/cli-script.c (validate_comname): Rewrite to handle prefix
6041 commands. Return the containing command list.
6042 (define_command, document_command): Update to handle prefix commands.
6043 (show_user_1): Add prefix and name arguments. Handle prefix
6045 * cli/cli-script.h (show_user_1): Update prototype.
6047 2009-01-14 Kai Tietz <kai.tietz@onevision.com>
6049 * ser-mingw.c (console_select_thread): Add return to make
6051 (pipe_select_thread): Likewise.
6052 (file_select_thread): Likewise.
6054 2009-01-14 Pedro Alves <pedro@codesourcery.com>
6056 * mi/mi-main.c (mi_cmd_execute): Clean up parenthesis mess from
6059 2009-01-14 Pedro Alves <pedro@codesourcery.com>
6061 * remote.c (extended_remote_mourn_1): Invalidate our notion of
6062 current general thread.
6064 2009-01-14 Pedro Alves <pedro@codesourcery.com>
6066 * mi/mi-main.c (mi_cmd_execute): Also allow -list-thread-groups
6067 without a live selected thread.
6069 2009-01-14 Joel Brobecker <brobecker@adacore.com>
6071 Update the copyright notice of some of the files I missed
6072 in the previous copyright update.
6074 2009-01-14 Joel Brobecker <brobecker@adacore.com>
6076 * windows-nat.c (handle_unload_dll): Use %p to print the DLL
6077 base address instead of casting it to DWORD.
6079 2009-01-13 Ulrich Weigand <uweigand@de.ibm.com>
6081 * dwarf2loc.c (dwarf2_evaluate_loc_desc): Do not call get_frame_arch
6082 for NULL frame pointers.
6084 2009-01-13 Mark Kettenis <kettenis@gnu.org>
6086 * utils.c (host_address_to_string): Reimplement in a way that
6087 avoids the cast of the address to long.
6089 2009-01-13 Joel Brobecker <brobecker@adacore.com>
6091 * mdebugread.c (parse_symbol): Save the symbol private data
6092 using SYMBOL_VALUE_BYTES instead of SYMBOL_VALUE.
6093 (psymtab_to_symtab_1): Likewise.
6094 (parse_procedure): Declare variable "e" only in the scope
6095 where it is used. Extract the symbol private data using
6098 2009-01-13 Jim Blandy <jimb@codesourcery.com>
6100 Abstract out common code for copying value locations.
6102 * value.h (set_value_component_location): New declaration.
6103 * value.c (set_value_component_location): New function.
6104 (value_primitive_field): Use it.
6105 * valarith.c (value_subscript, value_subscripted_rvalue): Same.
6106 * valops.c (search_struct_field, value_slice): Same.
6107 * ada-lang.c (coerce_unspec_val_to_type)
6108 (ada_value_primitive_packed_val): Same.
6110 2009-01-13 Joel Brobecker <brobecker@adacore.com>
6112 * MAINTAINERS (GLOBAL MAINTAINERS): Add Tom Tromey.
6114 2009-01-12 Christopher Faylor <me+cygwin@cgf.cx>
6116 * amd64-windows-nat.c Rename gdb-specific win32_* to windows_*
6118 * i386-cygwin-tdep.c: Ditto.
6119 * i386-windows-nat.c: Ditto.
6120 * windows-nat.h: Ditto.
6121 * windows-tdep.c: Ditto.
6122 * windows-tdep.h: Ditto.
6123 * windows-nat.c: Ditto.
6124 (cygwin_load_start): Redefine as CORE_ADDR.
6125 (cygwin_load_end): Ditto.
6126 (windows_make_so): Coerce result of address arithmetic to uintptr_t
6127 before coercing to CORE_ADDR to avoid a compiler warning.
6128 (handle_exception): Define addr as CORE_ADDR and coerce
6129 ExceptionAddress to uintptr_t before assigining to avoid a compiler
6131 * config/djgpp/fnchange.lst: Add mappings for recently renamed windows
6134 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
6136 Fix linking with --enable-targets=all:
6137 * Makefile.in (ALL_TARGET_OBS): Add windows-tdep.o.
6138 (HFILES_NO_SRCDIR): Add windows-tdep.h.
6139 (ALLDEPFILES): Add windows-tdep.c.
6141 2009-01-11 Chris Faylor <me.gdb@cgf.cx>
6143 * win32-nat.h: Delete.
6144 * windows-nat.h: Rename from win32-nat.h.
6145 * win32-nat.c: Delete.
6146 * windows-nat.c: Rename from win32-nat.c.
6147 * win32-termcap.c: Delete.
6148 * windows-termcap.c: Rename from win32-termcap.c.
6149 * amd64-windows-nat.c: Handle rename from win32-nat.h -> windows-nat.h.
6150 * configure.ac: Handle rename from win32-termcap.c ->
6152 * configure: Regenerate.
6153 * gdb_curses.h: Change comment to reflect rename from win32-termcap.c
6154 -> windows-termcap.c.
6155 * i386-cygwin-tdep.c: Handle rename from win32-tdep.h ->
6157 * i386-windows-nat.c: Refect rename from win32-nat.h -> windows-nat.h.
6158 * windows-nat.c: Ditto. Also reflect rename from from win32-tdep.h ->
6160 (win32_make_so): Handle cygwin compiler warning due to change of
6161 load_addr from DWORD to LPVOID.
6162 (handle_load_dll): Use %p in format string to properly print address
6163 and avoid a compiler warning.
6164 (DEBUG_EXCEPTION_SIMPLE): Ditto.
6165 (handle_exception): Ditto.
6166 * windows-tdep.c: Handle rename from win32-tdep.h -> windows-tdep.h.
6167 * config/i386/cygwin.mh: Handle rename from win32-nat.o ->
6169 * config/i386/mingw.mh: Ditto.
6170 * config/i386/mingw64.mh: Ditto.
6172 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
6174 * f-typeprint.c (f_type_print_varspec_suffix): Convert the autovariable
6175 arrayprint_recurse_level to a parameter. Update all the callers. New
6176 comment at autovariables.
6178 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
6180 * gdbtypes.c (make_qualified_type, replace_type): Reformat to the GNU
6183 2009-01-11 Joel Brobecker <brobecker@adacore.com>
6185 * target.c (target_xfer_partial): Use host_address_to_string to
6186 print the address of readbuf and writebuf. Cast the address of
6187 elements inside the myaddr buffer into intptr_t.
6188 (deprecated_debug_xfer_memory): Use paddress to print memaddr.
6189 Cast the address of elements inside the myaddr buffer into
6192 2009-01-11 Joel Brobecker <brobecker@adacore.com>
6194 * amd64-windows-nat.c, amd64-windows-tdep.c: New files.
6195 * config/i386/mingw64.mh, config/i386/nm-cygwin64.h: New files.
6196 * configure.host, configure.tgt: Add handling for x86_64/windows.
6197 * config/djgpp/fnchange.lst: Add entries for amd64-windows-nat.c
6198 and amd64-windows-tdep.c.
6200 2009-01-11 Joel Brobecker <brobecker@adacore.com>
6202 * win32-tdep.h, win32-tdep.c: New files.
6203 * i386-cygwin-tdep.h: Delete.
6204 * i386-cygwin-tdep.c: Include win32-tdep.h instead of
6206 (win32_xfer_shared_library): Delete. Moved to win32-tdep.c.
6207 * win32-nat.c: Likewise.
6208 * configure.tgt: Add win32-tdep.o to the list of target object
6209 files for i386-cygwin and i386-mingw targets.
6211 2009-01-11 Joel Brobecker <brobecker@adacore.com>
6213 * win32-nat.h: New file.
6214 * win32-nat.c (mappings): Initialize to NULL.
6215 (win32_set_context_register_offsets): New function.
6216 * i386-windows-nat.c: New file.
6217 (mappings): Moved here from win32-nat.c.
6218 (_initialize_i386_windows_nat): New function.
6219 * config/i386/mingw.mh (NATDEPFILES): Add i386-windows-nat.o.
6220 * config/i386/cygwin.mh (NATDEPFILES): Likewise.
6222 2009-01-09 Andreas Schwab <schwab@suse.de>
6224 * Makefile.in (init.c): Set LANG/LC_ALL to C, not c.
6226 2009-01-09 Daniel Jacobowitz <dan@codesourcery.com>
6228 * gdbtypes.c (append_composite_type_field): Correct the location of
6231 2009-01-09 Pedro Alves <pedro@codesourcery.com>
6233 * defs.h (deprecated_error_hook): Delete declaration.
6234 * interps.c (clear_interpreter_hooks): Adjust.
6235 * remote-sim.c (gdb_os_error): Don't try to call
6236 deprecated_error_hook. No need to call exit anymore.
6237 * top.c (deprecated_error_hook): Delete.
6239 2009-01-09 Joel Brobecker <brobecker@adacore.com>
6241 * arch-utils.c (gdbarch_update_p): Use host_address_to_string
6242 to print the address of the gdbarch pointer.
6244 2009-01-09 Joel Brobecker <brobecker@adacore.com>
6246 * gdbarch.sh: Fix all the compilation errors on amd64-windows
6247 due to casting a pointer to a long when printing a function
6248 address. Instead, use host_address_to_string to convert our
6249 address to a string.
6250 * gdbarch.c: Regenerate.
6252 2009-01-09 Joel Brobecker <brobecker@adacore.com>
6254 * event-top.c (async_disconnect, async_stop_sig): use "raise"
6255 instead of "kill" to raise a signal.
6257 2009-01-09 Joel Brobecker <brobecker@adacore.com>
6259 * win32-nat.c (get_module_name): Change the type of parameter
6260 "base_address" to LPVOID. Remove unnecessary cast.
6261 (struct lm_info): Change type of load_addr to LPVOID.
6262 (win32_make_so): Change the type of parameter "load_addr"
6263 to LPVOID. Remove some unnecessary casts.
6264 (handle_unload_dll): Change the type of "lpBaseOfDll" to LPVOID.
6265 (win32_xfer_shared_libraries): Add missing cast.
6267 2009-01-09 Joel Brobecker <brobecker@adacore.com>
6269 * win32-nat.c (has_detach_ability, set_process_privilege):
6270 Cast the result of GetProcAddress to (void *) to avoid
6271 a compilation warning.
6273 2009-01-09 Joel Brobecker <brobecker@adacore.com>
6275 * win32-nat.c (CONTEXT_EXTENDED_REGISTERS): Define to 0 if not
6278 2009-01-09 Joel Brobecker <brobecker@adacore.com>
6280 * win32-nat.c (get_image_name, win32_xfer_memory): Fix type
6281 definition of local variable "done".
6282 (info_w32_command, handle_exception): Remove unnecessary cast.
6284 2009-01-09 Joel Brobecker <brobecker@adacore.com>
6286 * win32-nat.c (kernel32_DebugSetProcessKillOnExit): Renames
6287 DebugSetProcessKillOnExit. Update all uses in this file.
6288 (kernel32_DebugActiveProcessStop): Renames DebugActiveProcessStop.
6289 Update all uses in this file.
6291 2009-01-09 Joel Brobecker <brobecker@adacore.com>
6293 * win32-nat.c (do_initial_win32_stuff): Add new ops parameter,
6294 and use it when pushing the target.
6295 (win32_attach, win32_create_inferior): Update call to
6296 do_initial_win32_stuff.
6297 (win32_detach, win32_mourn_inferior): Use our ops parameter
6298 instead of the global win32_ops to unpush the target.
6300 2009-01-09 Joel Brobecker <brobecker@adacore.com>
6302 * ser-mingw.c (ser_windows_open): Use proper type when casting
6303 in call to _open_osfhandle.
6305 2009-01-09 Kai Tietz <kai.tietz@onevision.com>
6307 * coff-pe-read.c (read_pe_exported_syms): Fix typo.
6309 2009-01-09 Joel Brobecker <brobecker@adacore.com>
6311 * CONTRIBUTE: Minor reformatting.
6313 2009-01-08 Kai Tietz <kai.tietz@onevision.com>
6315 * MAINTAINERS: Add myself to Write After Approval.
6316 * coff-pe-read.c (read_pe_exported_syms): Enable read of PE+
6319 2009-01-08 Nathan Froyd <froydnj@codesourcery.com>
6321 * remote-sim.c (gdb_os_error): Mark as a noreturn function.
6322 Call exit to make it obvious to GCC.
6324 2009-01-08 Tom Tromey <tromey@redhat.com>
6326 PR breakpoints/9350:
6327 * varobj.c (varobj_invalidate): Unconditionally free
6329 * symfile.c (syms_from_objfile): Free local_addr when returning
6331 * exec.c (exec_file_attach): Do cleanups before returning.
6332 (exec_file_command): Likewise.
6333 * corefile.c (reopen_exec_file): Do cleanups before returning.
6334 * breakpoint.c (insert_breakpoint_locations): Do cleanups before
6336 (do_vec_free): New function.
6337 (update_global_location_list): Make a cleanup for old_locations.
6338 Do cleanups before returning. Remove unused variable 'e'.
6339 (find_condition_and_thread): Free result of parsing the
6341 (print_it_typical): Do cleanups before returning.
6342 (breakpoint_re_set_one): Always free sals.sals.
6344 2009-01-08 Joel Brobecker <brobecker@adacore.com>
6345 Emi Suzuki <emi-suzuki@tjsys.co.jp>
6347 * breakpoint.c (do_enable_breakpoint): Use update_watchpoint for
6350 2009-01-07 Doug Evans <dje@google.com>
6352 * top.c (gdb_prompt_string): Delete, unused.
6354 2009-01-07 Pedro Alves <pedro@codesourcery.com>
6356 Delete ONE_PROCESS_WRITETEXT leftovers.
6358 * breakpoint.c (insert_bp_location): Delete process_warning
6360 (insert_breakpoint_locations): Adjust.
6361 (reattach_breakpoints): Adjust.
6362 * infrun.c (normal_stop): Drop "It might be running in another
6365 2009-01-07 Stan Shebs <stan@codesourcery.com>
6367 * config/pa/linux.mh (XDEPFILES): Remove.
6369 2009-01-07 Doug Evans <dje@google.com>
6371 * cli/cli-cmds.c (set_debug): Fix cut-n-paste error.
6373 2009-01-07 Jan Kratochvil <jan.kratochvil@redhat.com>
6375 * f-typeprint.c (f_type_print_base <TYPE_CODE_STRUCT>): Fix output
6376 spacing, a regression from 2008-04-22.
6378 2009-01-07 Joel Brobecker <brobecker@adacore.com>
6380 * utils.c (gdb_print_host_address): Adjust implementation to
6381 reuse host_address_to_string. Move comment explaining the conversion
6382 from host address to string from here...
6383 (host_address_to_string): ... to there.
6385 2009-01-07 Emi Suzuki <emi-suzuki@tjsys.co.jp>
6387 * MAINTAINERS: Add myself for write after approval privileges.
6389 2009-01-06 Tom Tromey <tromey@redhat.com>
6391 * value.c (set_internalvar): Use value_free, not xfree.
6393 2009-01-06 Jim Blandy <jimb@red-bean.com>
6395 Check return values of functions declared with warn_unused_result
6396 attribute in GLIBC 2.8.
6397 * cli/cli-cmds.c (pwd_command): Check return value from getcwd.
6398 * inflow.c (check_syscall): New function.
6399 (new_tty): Use check_syscall to check return values from open and dup.
6400 * linux-nat.c (linux_nat_info_proc_cmd): Check return value from fgets.
6401 * main.c (captured_main): Call cwd after setting up gdb_stderr;
6402 check for errors from getcwd.
6403 * mi/mi-cmd-env.c (mi_cmd_env_pwd): Check return value from getcwd.
6404 * ui-file.c (stdio_file_write): Ignore return value from fwrite.
6405 (stdio_file_fputs): Same.
6406 * utils.c (internal_vproblem): abort if last-ditch error message
6409 * top.c (gdb_init): Don't set the current directory here; that's
6410 already been done in captured_main.
6412 2009-01-06 Sandra Loosemore <sandra@codesourcery.com>
6414 * ser-tcp.c: Adjust includes.
6415 (tcp_set_cmdlist, tcp_show_cmdlist): Declare.
6416 (tcp_auto_retry, tcp_retry_limit): Declare.
6417 (TIMEOUT): Remove, in favor of tcp_retry_limit.
6418 (POLL_INTERVAL): Increase to 5, in favor of backoff logic.
6419 (wait_for_connect): New function.
6420 (net_open): Use it. Add auto-retry logic.
6421 (set_tcp_cmd, show_tcp_cmd): New functions.
6422 (_initialize_ser_tcp): Initialize new "set/show tcp auto-retry"
6423 and "set/show tcp connect-timeout" commands.
6424 * NEWS: Document new commands.
6426 2009-01-05 Tom Tromey <tromey@redhat.com>
6428 * python/python-internal.h (Py_ssize_t): Define as int.
6430 2009-01-05 Jim Blandy <jimb@red-bean.com>
6432 * MAINTAINERS: Fix my e-mail address as steering committee member.
6434 2009-01-03 Joel Brobecker <brobecker@adacore.com>
6436 Updated copyright notices for most files.
6438 2009-01-03 Joel Brobecker <brobecker@adacore.com>
6440 * top.c (print_gdb_version): Update copyright year.
6442 2009-01-03 Joel Brobecker <brobecker@adacore.com>
6444 * config/djgpp/fnchange.lst: Add entry for ChangeLog-2008.
6446 2009-01-01 Pedro Alves <pedro@codesourcery.com>
6448 PR breakpoints/9681:
6449 * exceptions.h (enum errors): New error type, MEMORY_ERROR.
6450 * corefile.c (memory_error): Rewrite to throw a MEMORY_ERROR.
6451 * breakpoint.c (fetch_watchpoint_value): Ignore MEMORY_ERRORs, but
6452 retrow all other exceptions.
6454 For older changes see ChangeLog-2008.
6460 version-control: never