1 Mon Mar 10 12:27:47 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
3 * symtab.h (INIT_SAL): New macro to initialize symtab_and_line,
4 to insure consistant initialization of unused fields to zero.
5 * symtab.c: replace initializations of sals with new macro INIT_SAL.
9 * source.c: add call to INIT_SAL macro.
11 Sat Mar 8 00:16:37 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
13 * sparc-tdep.c (isbranch): Always handle v9 branch instructions,
14 they might get used on 32 bit targets as well.
16 Wed Mar 5 19:34:09 1997 Bob Manson <manson@charmed.cygnus.com>
18 * remote-mips.c (mips_exit_debug): Some IDT boards don't
19 send the full exit string.
21 Wed Mar 5 12:59:27 1997 Jeffrey A Law (law@cygnus.com)
23 * mn10200-tdep.c (mn10200_push_arguments): Handle new calling
25 (mn10200_store_struct_return): Likewise.
27 Tue Mar 4 10:31:02 1997 Mark Alexander <marka@cygnus.com>
29 * mips-tdep.c (mips_fetch_instruction): New function; replace
30 common code throughout with calls to it.
31 (mips_find_saved_regs): Examine MIPS16 entry instruction to determine
32 correct saved addresses of $s0 and $s1.
33 (mips_find_saved_regs, mips16_heuristic_proc_desc): Use MIPS_REGSIZE
34 instead of hardcoded 4.
35 (mips16_skip_prologue): Handle extended instructions correctly.
37 Mon Mar 3 12:29:20 1997 Doug Evans <dje@canuck.cygnus.com>
39 * defs.h (LONGEST): Move #ifndef LONGEST to outside.
40 Try BFD_HOST_64_BIT if ! CC_HAS_LONG_LONG.
42 Thu Feb 27 18:54:11 1997 Mark Alexander <marka@cygnus.com>
44 * mips-tdep.c (IS_MIPS16_ADDR, MAKE_MIPS16_ADDR, UNMAKE_MIPS16_ADDR):
45 New macros for testing, setting, and clearing bit 0 of addresses.
46 Change numerous bits of code where bit 0 was being manipulated
49 Thu Feb 27 14:12:41 1997 Mark Alexander <marka@cygnus.com>
51 * remote-mips.c: Put back the form feeds.
53 Thu Feb 27 12:04:24 1997 Mark Alexander <marka@cygnus.com>
55 * remote-mips.c: Remove form feeds (^L) from source.
56 (mips_initialize): LSI PMON doesn't support 'set regsize' command.
57 (pmon_wait): Don't need to exit and re-enter debug mode on LSI
58 PMON after a continue; it causes target program misbehavior.
59 (mips_fetch_register): Don't fetch unsupported registers; this
60 cuts down on wasted serial traffic.
62 Thu Feb 27 09:38:16 1997 Stu Grossman (grossman@critters.cygnus.com)
64 * configure.in configure (HPUX/OSF thread support): Enable this
65 only when running GCC, since HP's thread header files use ANSI C
66 which is not supported by their default compiler.
68 * configure.host (i[3456]86-*-windows): Disable long long
69 support for WinGDB. Add mswin to configdirs.
70 * configure.in configure: Move calls to configure.host and
71 configure.tgt to the top of configure.in to allow them to set
72 config variables before they are referenced.
74 Tue Feb 25 20:21:52 1997 Stan Shebs <shebs@andros.cygnus.com>
76 * configure.tgt (mips*-*-lnews*): New target.
78 Mon Feb 24 16:35:00 1997 Jeffrey A Law (law@cygnus.com)
80 * mn10200-tdep.c (mn10200_analyze_prologue): Don't fix fi->frame
81 if we're not the innermost frame. Fix minor typos.
83 Sat Feb 22 03:39:50 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
85 * stabsread.c (read_type): Fix handling of template names
86 with template parameters containing `::'.
88 * valops.c (search_struct_field, search_struct_method):
89 Pass correct valaddr parameter to baseclass_offset.
90 Prevent gdb crashes by making sure that the virtual base pointer
91 from an user object still points to accessible memory.
93 Tue Feb 18 13:36:34 1997 Mark Alexander <marka@cygnus.com>
95 * maint.c: Eliminate -Wall warnings by including some header files.
97 Tue Feb 18 13:06:30 1997 Mark Alexander <marka@cygnus.com>
99 * remote-sim.c (init_callbacks): Undo previous change.
101 Tue Feb 18 11:13:00 1997 Dawn Perchik <dawn@cygnus.com>
103 * maint.c: Fix dereference of pointer.
104 * remote-sim.c: Fix reference of structure member "last_error".
105 * debugify.c: Include config.h to get ANSI definitions.
107 Sat Feb 15 17:43:46 1997 Stu Grossman (grossman@critters.cygnus.com)
109 * remote-vx.c (vx_attach): Fix for PR 11356. Remove code added
110 by kung. It made no sense.
112 Fri Feb 14 13:00:07 1997 Ian Lance Taylor <ian@cygnus.com>
114 * main.c (print_gdb_help): Make static to match declaration.
116 Thu Feb 13 18:18:18 1997 Dawn Perchik <dawn@cygnus.com>
118 * remote-e7000.c, ser-e7kpc.c, serial.c: Remove // comments.
120 Wed Feb 12 15:58:00 1997 Dawn Perchik <dawn@cygnus.com>
122 * debugify.c, debugify.h: Make safe for non-ansi compilers.
124 Wed Feb 12 15:30:00 1997 Dawn Perchik <dawn@cygnus.com>
126 * defs.h: Fix prototypes for new cleanup functions.
128 Wed Feb 12 15:08:47 1997 Dawn Perchik <dawn@cygnus.com>
130 * debugify.c, debugify.h: Fix for general gnu use. Remove C++
131 comment, add PARAMS, add license info and fix indentation.
133 Wed Feb 12 14:42:47 1997 Dawn Perchik <dawn@cygnus.com>
135 * debugify.c, debugify.h: New files. Provide common macros
136 for writing debug info to a log file or stdio.
138 Wed Feb 12 02:44:39 1997 Dawn Perchik <dawn@cygnus.com>
140 * c-valprint.c (c_val_print): Fix printing for arrays defined
141 with 0 length. A sticky tag caused this fix from
142 revision 2.32 date: 1996/04/29 23:25:27; author: dawn;
143 state: Exp; lines: +1 -0 branches: 2.32.34;
144 to not make it into devo.
146 Tue Feb 11 22:24:39 1997 Dawn Perchik <dawn@cygnus.com>
148 * defs.h: Fix cntl-C to read from the Windows message queue.
149 Add prototypes for make_final_cleanup (and the other cleanup
151 * remote-e7000.c: Fix sync code to timeout if unable to sync.
152 Change sync code to report status while trying to sync-up
153 with hardware. Add debugging output and document.
154 * ser-e7kpc.c: Swap order of len & offset to match implementation.
155 Add debugging output and document.
156 * serial.c: Add debugging output.
157 * top.c: Add call to do_final_cleanups.
158 Remove conditionals preventing Win32 from getting SIGQUIT.
159 * utils.c: (*_cleanup): Modify cleanup routines to accept a cleanup
160 chain as a parameter. Extract this generic code from the cleanup
161 routines into separate funtions (*_my_cleanup). Keep old
162 functionality by passing "cleanup_chain" to the new funtions.
163 Define the cleanup chain "final_cleanup_chain" to be a cleanup
164 chain which will be executed only when gdb exits. Add functions
165 (*_final_cleanup) to match the original (*_cleanup) functions.
166 (pollquit, quit, notice_quit): Fix to read cntl-C from the
167 Windows message queue.
170 Tue Feb 11 15:36:31 1997 Doug Evans <dje@canuck.cygnus.com>
172 * m32r-rom.c: #include <sys/types.h>.
173 #ifdef out new load support if wingdb.
174 * m32r/tm-m32r.h (TARGET_M32R): Define, for wingdb.
177 Tue Feb 11 12:28:09 1997 Jeffrey A Law (law@cygnus.com)
180 * config/mn10200/tm-mn10200.h (STORE_STRUCT_RETURN): Fix.
181 * mn10200-tdep.c (mn10200_store_struct_return): New function.
183 * config/mn10200/tm-mn10200.h (EXTRACT_RETURN_VALUE): Fix case when
184 extracting a return value from a register pair.
186 * mn10200-tdep.c (mn10200_push_arguments): Stack only needs to
187 be two byte aligned. Round argument sizes up to two byte boundary.
188 Write out args in two byte hunks.
189 (mn10200_push_return_address): Implement.
190 * config/mn10200/tm-mn10200.h (EXTRACT_RETURN_VALUE): Abort for
191 structures > 8 bytes (temporary).
192 (STORE_RETURN_VALUE): Likewise.
193 (CALL_DUMMY): No longer undefine.
194 (USE_STRUCT_CONVENTION): Use for args > 8 bytes.
195 (REG_STRUCT_HAS_ADDR): Define.
198 Fri Feb 07 09:04:37 1997 Gavin Koch <gavin@cygnus.com>
200 * configure.tgt: added r5900.
203 Mon Feb 10 18:35:55 1997 Mark Alexander <marka@cygnus.com>
205 * mips-tdep.c (non_heuristic_proc_desc): New function.
206 (find_proc_desc): Move non-heuristic proc search code into separate
208 (gdb_print_insn_mips): Use non-heuristic method to find procedure
209 descriptor, to avoid prologue examination when disassembling.
210 * remote-mips.c: Add support for new "lsi" target (LSI MiniRISC
211 aka MicroMeteor board).
212 (mips_exit_debug): Prevent protocol reinitialization if an error
213 occurs while exiting debug mode.
215 Mon Feb 10 16:11:57 1997 Jeffrey A Law (law@cygnus.com)
217 * mn10200-tdep.c: Remove lots of debugging printfs, update/improve
218 comments, formatting, etc. Plus other minor fixes for problems
219 I found during my first pass over the mn10200 port.
220 (mn10200_analyze_prologue): New function.
221 (mn10200_frame_chain, mn10200_init_extra_frame_info): Use it.
222 * config/mn10200/tm-mn10200.h: Lots of updates/improvements to
223 comments, formatting, etc. Minor fixes for problems I found during
224 my first pass over the mn10200 port.
225 (TARGET_*_BIT): Define appropriately for ints, long longs, doubles and
227 (REGISTER_VIRTUAL_TYPE): Define as a long.
228 (EXTRACT_RETURN_VALUE): Rework to deal with long ints living
230 (STORE_RETURN_VALUE): Similarly.
232 * blockframe.c (generic_get_saved_regs): Remove unused variable
234 * breakpoint.c (frame_in_dummy): Move struct breakpoint *b decl
235 inside #ifdef CALL_DUMMY.
236 (watch_command_1): Initialize target_resources_ok.
237 * command.c (do_setshow_command): Provide dummy initialization
239 * valops.c (find_function_addr): Move function & prototype inside
241 (value_arg_coerce): Similarly.
242 (value_of_variable): Provide dummy initialization of "frame".
244 Mon Feb 10 13:50:53 1997 Stu Grossman (grossman@critters.cygnus.com)
246 * gdbtk.c (call_wrapper): Clear running_now if an error occurs.
247 This fixes PR 11323, where gdbtk stops responding if an error occurs.
249 Mon Feb 10 07:54:26 1997 Fred Fish <fnf@cygnus.com>
251 * xcoffread.c (RECORD_MINIMAL_SYMBOL): Add NULL asection* parameter
252 to prim_record_minimal_symbol_and_info call that was missed in Jan 3
254 (scan_xcoff_symtab): Ditto.
256 Sun Feb 09 09:23:26 1997 Mark Alexander <marka@cygnus.com>
258 * remote-mips.c (common_breakpoint): Prevent 64-bit addresses
259 from being sent to 32-bit targets by masking off upper bits.
260 * mips-tdep.c (heuristic_proc_start): Mask off upper 32 bits
261 of PC on 32-bit targets.
262 (mips16_heuristic_proc_desc): Recognize 'addiu s1,sp,n' as a
263 frame setup instruction.
264 (mips32_heuristic_proc_desc): Fix warning found by gcc -Wall.
265 (mips16_skip_prologue): Recognize 'addiu s1,sp,n' as a valid
266 prologue instruction. Fix warnings and bugs found by gcc -Wall.
267 * buildsym.c (finish_block): Improve handling of overlapping blocks;
268 fixes problem on MIPS16 printing function arguments.
270 Sat Feb 8 01:14:43 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
272 * dwarf2read.c (dwarf2_linkage_name): New function to get
273 the linkage name of a die from DW_AT_MIPS_linkage_name or
275 (read_func_scope, dwarf2_add_field, dwarf2_add_member_fn,
276 new_symbol): Use it instead of accessing DW_AT_name.
277 (read_partial_die): Use DW_AT_MIPS_linkage name as name of the
278 partial die if present.
279 (dwarf2_add_member_fn): Make a copy of physname on the type obstack.
281 Fri Feb 7 10:06:22 1997 Jeffrey A Law (law@cygnus.com)
283 * blockframe.c (generic_frame_chain_valid): If the new frame
284 is not INNER_THAN the old frame, then it's not valid.
286 Tue Feb 04 09:04:37 1997 Mark Alexander <marka@cygnus.com>
288 * mips-tdep.c (mips16_get_imm): Fix calculation of extended immediate.
289 (mips16_heuristic_proc_desc): Recognize jal(x) instruction.
291 Mon Feb 03 17:57:58 1997 Mark Alexander <marka@cygnus.com>
293 * mips-tdep.c (mips16_decode_reg_save): Distinguish between
294 sd and sw instructions correctly.
295 (heuristic_proc_start): Add support for MIPS16.
296 (mips16_get_imm, mips16_heuristic_proc_desc,
297 mips32_heuristic_proc_desc): New helper functions for
299 (heuristic_proc_desc): Rewrite and reorganize to support MIPS16.
300 (mips_push_arguments): Don't align small arguments in EABI.
301 (mips32_skip_prologue): Attempt to shrink code size a little.
304 Mon Feb 3 11:06:05 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
306 * m32r-stub.c: New -- remote protocol support for M32R cpu.
307 * m32r-rom.c: Several experiments with improved download time.
308 * .Sanitize: Add entry for m32r-stub.c
311 Fri Jan 31 08:26:39 1997 Mark Alexander <marka@cygnus.com>
313 * mips-tdep.c (MIPS16_INSTLEN): Define.
314 (mips_find_saved_regs): Replace hardcoded 2's with MIPS16_INSTLEN.
315 (heuristic_proc_start): Recognize 'entry' pseudo-op as a start
316 of function on MIPS16.
317 (mips32_skip_prologue, mips16_skip_prologue): New helper functions
318 for mips_skip_prologue.
319 (mips_skip_prologue): Recognize both 16- and 32-bit prologues.
321 Wed Jan 29 12:45:54 1997 Michael Meissner <meissner@tiktok.cygnus.com>
323 * config/powerpc/ppc{,le}-sim.mt (SIM): Remove the library
324 ../sim/common/libcommon.a.
326 Tue Jan 28 15:54:13 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
328 * blockframe.c: fix a null pointer ref in generic_get_saved_register
330 Tue Jan 28 15:39:50 1997 Geoffrey Noer <noer@cygnus.com>
332 * mn10200-tdep.c (mn10200_frame_chain): Get basic backtracing
335 Mon Jan 27 14:31:52 1997 Mark Alexander <marka@cygnus.com>
337 First set of changes for mips16:
338 * config/mips/tm-mips.h (MIPS16_BIG_BREAKPOINT,
339 MIPS16_LITTLE_BREAKPOINT, BREAKPOINT_FROM_PC): Define.
340 (ABOUT_TO_RETURN): Call new function mips_about_to_return.
341 (mips_breakpoint_from_pc, mips_about_to_return): Declare.
342 * mem-break.c (memory_breakpoint_from_pc): New function.
343 (memory_insert_breakpoint, memory_remove_breakpoint): Use
344 memory_breakpoint_from_pc to determine breakpoint contents and size.
345 * target.h (memory_breakpoint_from_pc): Declare.
346 * monitor.c (monitor_insert_breakpoint): Use memory_breakpoint_from_pc
347 to determine size of breakpoint instruction.
348 * mips-tdep.c (mips32_decode_reg_save, mips16_decode_reg_save):
349 New helper functions for mips_find_saved_regs.
350 (mips_find_saved_regs): Recognize mips16 prologues.
351 (mips_addr_bits_remove): Strip off upper 32 bits of address
352 when target CPU is 32 bits but CORE_ADDR is 64 bits.
353 (mips_step_skips_delay): No branch delay slot on mips16.
354 (gdb_print_insn_mips): Disassemble mips16 code.
355 (mips_breakpoint_from_pc, mips_about_to_return): New functions.
357 Mon Jan 27 10:34:03 1997 Jeffrey A Law (law@cygnus.com)
359 * tm-mn10200.h (NUM_REGS): Decrease to 12.
360 (REGISTER_NAMES): Elimination registers not found on the mn10200.
361 (PC_REGNUM, MDR_REGNUM, PSW_REGNUM): Corresponding changes.
362 (LIR_REGNUM, LAR_REGNUM): Delete. They don't exist on the mn10200.
364 Sat Jan 25 00:07:59 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
366 * dwarf2read.c: Replace integral tag, name and form fields in
367 internal structure definitions with the corresponding enumeration
368 types from dwarf2.h. Add default cases to switches on enumerations
370 Make quoting of string arguments in complaint messages consistent.
371 Check for NULL returns from DW_STRING.
372 (struct partial_die_info): Add sibling and has_type fields, remove
374 (DW_*): Move access macro definitions near the definition of the
376 (struct field_info): New structure to pass information about fields
377 and member functions between die processing routines.
378 (dwarf2_build_psymtabs_hard): Set cu_header_offset.
379 (scan_partial_symbols): Do not enter DW_TAG_subprogram dies into
380 the partial symbol table if the DW_AT_*_pc attributes are missing.
381 Add file scope base type definitions to the partial symbol table.
382 Skip over child dies if the die has a sibling attribute.
383 (add_partial_symbol): Enter global variables with type attributes
384 and without location descriptors into the partial symbol table.
385 Store value of DW_TAG_variable dies in the partial symbol table.
386 Do not enter global variables into the minimal symbol table.
387 Add base type definitions to the partial symbol table.
388 (psymtab_to_symtab_1): Use dwarf2_get_pc_bounds to determine highpc.
389 (process_die): Move check for DW_AT_low_pc to read_func_scope.
390 Add a typedef symbol for base type definitions to the symbol table.
391 Ignore DW_TAG_inlined_subroutine tags for now.
392 (read_file_scope): Use dwarf2_get_pc_bounds to determine pc bounds.
393 (read_func_scope, read_lexical_block_scope): Use dwarf2_get_pc_bounds
394 to determine pc bounds, ignore dies with invalid bounds.
395 (dwarf2_get_pc_bounds): New routine to extract and validate the
396 DW_AT_*_pc attributes of a die.
397 (dwarf2_add_field, dwarf2_attach_fields_to_type, skip_member_fn_name,
398 dwarf2_add_member_fn, dwarf2_attach_fn_fields_to_type):
399 New functions to handle fields and member functions.
400 (read_structure_scope): Rewritten to use them.
401 (read_array_type): Renamed from dwarf_read_array_type.
402 Default upper array bound to describe an array with unspecified
404 Create array types in backwards order, as dwarf2 puts out the array
405 dimensions from left to right.
406 (read_subroutine_type): Handle DW_TAG_unspecified_parameters,
407 DW_AT_artificial and DW_AT_prototyped.
408 (read_base_type): Make an unsigned type for DW_ATE_boolean.
409 Pass objfile to dwarf_base_type.
410 (read_partial_die): Use read_attribute to read in the attributes.
411 Handle DW_AT_sibling and DW_AT_type.
412 Follow references when determining DW_AT_name and DW_AT_external
413 attributes of the die.
414 Validate DW_AT_*_pc attributes.
415 (read_full_die): Use read_attribute to read in the attributes.
416 (read_attribute): New function to read an attribute described
417 by an abbreviated attribute.
418 (new_symbol): Relocate symbol value for DW_TAG_label with baseaddr.
419 Do not set SYMBOL_VALUE_ADDRESS for DW_TAG_subprogram,
420 SYMBOL_BLOCK_VALUE for the symbol will be set later by finish_block.
421 Change symbol class for global variables with a zero valued location
422 descriptor to LOC_UNRESOLVED.
423 Handle DW_AT_const_value attributes for DW_TAG_variable,
424 DW_TAG_formal_parameter and DW_TAG_enumerator.
425 Build a typedef symbol for DW_TAG_base_type.
426 (dwarf2_const_value): New routine to copy a constant value from an
427 attribute to a symbol.
428 (dwarf_base_type): Use passed in objfile, not current_objfile
429 when calling dwarf2_fundamental_type.
430 (dump_die): Use DW_* accessor macros to access values of attributes.
431 (decode_locdesc): Handle DW_OP_plus_uconst.
433 Wed Jan 22 01:31:16 1997 Geoffrey Noer <noer@cygnus.com>
435 * mn10200-tdep.c: New file.
436 * config/mn10200/tm-mn10200.h: New, REGISTER_SIZE is 24 bits not 32,
437 SP_REGNUM and FP_REGNUM are different, also no lar or lir.
438 * config/mn10200/mn10200.mt: New file.
439 * configure.tgt: add mn10200 entry.
441 Tue Jan 21 18:32:23 1997 Stu Grossman (grossman@lisa.cygnus.com)
443 * configure.in configure: Check if host has libdl if doing
446 Tue Jan 21 17:03:26 1997 Geoffrey Noer <noer@cygnus.com>
448 * mn10300-tdep.c: Wrote/fixed implementations of
449 mn10300_frame_chain, mn10300_init_extra_frame_info,
450 mn10300_frame_saved_pc
451 * config/mn10300/tm-mn10300.h: Redefine INIT_EXTRA_FRAME_INFO
452 and INIT_FRAME_PC macros.
454 Tue Jan 21 17:01:20 1997 Stu Grossman (grossman@lisa.cygnus.com)
456 * configure.in configure: Check if host has libm. Make sure we
457 are using gcc when using the -export-dynamic option. Fixes a
458 problem with building under Solaris/SunPro cc.
460 Mon Jan 20 13:52:13 1997 Mark Alexander <marka@cygnus.com>
462 * config/mips/{embed,embed64,embedl,embedl64}.mt:
463 Link in simulator on MIPS embedded targets.
465 Sat Jan 18 02:31:29 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
467 * blockframe.c (frameless_look_for_prologue): Mark frames
468 with a zero PC as frameless to improve backtraces from core dumps
469 caused by dereferencing a NULL function pointer.
471 Thu Jan 16 14:10:41 1997 Geoffrey Noer <noer@cygnus.com>
473 * config/mn10300/tm-mn10300.h: fix BREAKPOINT definition.
475 Tue Jan 14 16:01:06 1997 Geoffrey Noer <noer@cygnus.com>
477 * mn10300-tdep.c: made a lot more generic, ripping out code
478 from copied target (no more mn10300_scan_prologue,
479 init_extra_frame_info, and mn10300_fix_call_dummy calls)
480 * config/mn10300/tm-mn10300.h: undefine INIT_EXTRA_FRAME_INFO
481 and INIT_FRAME_PC macros
483 Thu Jan 9 11:44:40 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
485 * sparc-tdep.c (sparc_frame_find_saved_regs): Don't use
486 FP_REGISTER_BYTES to compute offsets into the saved frame,
487 since it fails for SPARC targets configured without any
488 FP regs. Instead, use DUMMY_STACK_REG_BUF_SIZE.
490 Mon Jan 6 11:15:14 1997 Stu Grossman (grossman@critters.cygnus.com)
492 * symtab.c (fixup_symbol_section): Handle NULL symbols without
495 Fri Jan 3 12:08:16 1997 Stu Grossman (grossman@critters.cygnus.com)
497 * Makefile.in configure configure.in: Remove ENABLE_CLIBS,
498 ENABLE_OBS, and THREAD_DB_OBS. These are consolidated into LIBS
500 * configure configure.in: Clean up test cases around thread support.
502 * configure.tgt (v850-*-*): Include v850ice.o and v850.lib if
505 * c-valprint.c ch-valprint.c cp-valprint.c eval.c expprint.c
506 printcmd.c valops.c value.h values.c: Add bfd_section arg to
507 value_at and value_at_lazy.
508 * coffread.c dbxread.c elfread.c mdebugread.c minsyms.c symtab.h:
509 Add bfd_section arg to prim_record_minimal_symbol_and_info.
510 * corefile.c gdbcore.h printcmd.c valops.c: Use read_memory_section
511 instead of read_memory. It takes a bfd_section arg.
512 * coffread.c dbxread.c elfread.c gdb-stabs.h objfiles.h: Remove
513 unnecessary cast for assignment of struct dbx_symfile_info.
514 Struct objfile now uses a real pointer instead of PTR for this
516 * dbxread.c (dbx_symfile_init): Stash bfd section pointers for
517 text, data and bss into dbx_symfile_info.
518 * exec.c (xfer_memory): Handle transfers for user-specified
520 * findvar.c (read_var_value locate_var_value): Copy bfd section
521 from the symbol to the value.
522 * gdb-stabs.h: Add section pointers for text, data and bss
524 * maint.c (translate address command): Add test code for overlay
526 * printcmd.c (do_examine do_one_display): Now takes a bfd section
528 * (print_formatted x_command): Record current section along with
529 current address for repeated commands.
530 * sparc-nat.c (fetch_inferior_registers): Change
531 target_xfer_memory to target_{read write}_memory to allow changes
532 to target_xfer_memory interface for section info.
533 * symmisc.c (dump_msymbols print_symbol): Print section
534 assocaited with symbol.
535 * symtab.c (fixup_symbol_section): New routine to
536 add section info to symbols returned by lookup_symbol.
537 * symtab.h (struct general_symbol_info): Add bfd section to
539 * target.c target.h (target_xfer_memory): Add bfd section to
541 * (target_read_memory_section): New routine to read data from a
543 * (target_memory_bfd_section): New global variable to pass bfd
544 section in to targets.
545 * valarith.c (value_add value_addr value_array): Preserve bfd
546 section when computing new value.
547 * value.h (struct value): Add bfd section to values.
548 * values.c (allocate_value value_copy): Initialize/preserve bfd
550 * (unpack_double): Clean up _MSC_VER conditionals to remove
553 * v850ice.c: New module to support communication with NEC's
555 * config/v850/tm-v850.h (REGISTER_NAMES): Replace sp, gp, fp, and
556 ep names with rxx names. sp and fp are renamed via a different
560 Fri Jan 3 14:20:05 1997 Geoffrey Noer <noer@cygnus.com>
562 * mn10300-tdep.c (mn10300_push_arguments): rewrote,
563 also removed code elsewhere that made use of RP_REGNUM.
564 * config/mn10300/tm-mn10300.h: ripped out RP_REGNUM, V0_REGNUM,
565 ARG0_REGNUM, ARGLAST_REGNUM (all not appropriate for mn10300
566 arch.), redefined SAVED_PC_AFTER_CALL, EXTRACT_RETURN_VALUE,
567 EXTRACT_STRUCT_VALUE_ADDRESS, STORE_RETURN_VALUE.
569 For older changes see ChangeLog-96
575 version-control: never