1 Fri Jun 27 21:05:45 1997 Michael Snyder (msnyder@cleaver.cygnus.com)
3 * mips-tdep.c (mips_push_arguments): handle alignment of
4 integer and struct args on stack for mips64 big-endian.
6 Fri Jun 27 19:19:12 1997 Michael Snyder (msnyder@cleaver.cygnus.com)
8 * config/mips/tm-mips.h (USE_STRUCT_CONVENTION): MIPS_EABI returns
9 structs in a register wherever possible.
10 * mips-tdep.c (mips_extract_return_value): handle structs.
11 (mips_store_return_value): handle values smaller than MIPS_REGSIZE
12 (including structs, if gdb ever allows it).
15 Fri Jun 20 17:58:34 1997 Fred Fish <fnf@cygnus.com>
17 * sh-tdep.c (sh_skip_prologue): Also recognize fmov insns.
18 (sh_frame_find_saved_regs): Recognize fmov insns and adjust
19 stack push count accordingly.
20 * sh-tdep.c (IS_FMOV, FPSCR_SZ): New defines
23 Thu Jun 19 08:18:48 1997 Mark Alexander <marka@cygnus.com>
25 * utils.c (floatformat_from_doublest): Improve test for infinity.
27 Wed Jun 18 13:47:52 1997 Fred Fish <fnf@cygnus.com>
29 * dwarfread.c (isreg, optimized_out, offreg, basereg): Move
30 global variables into the struct dieinfo structure.
31 (locval): Pass pointer to a dieinfo struct rather than a
32 pointer to the raw location information. Change prototype.
33 Set isreg, optimized_out, offreg and basereg as appropriate.
34 (struct_type): Call locval with dieinfo struct pointer.
36 (new_symbol): Call locval and save location before testing
37 the values of the new dieinfo struct flags, set by locval.
39 Tue Jun 17 13:30:12 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
41 * procfs.c (proc_set_exec_trap, procfs_init_inferior, procfs_wait,
42 unconditionally_kill_inferior): Undo Oct 26 1996 and Apr 26 1997
43 changes to trace PRFS_STOPTERM and handle PR_DEAD.
44 These changes tried to work around a problem with an early DU 4.0
45 release, but they trigger subtle timing dependent kernel bugs
46 in older OSF/1 releases.
48 Tue Jun 17 06:52:47 1997 Fred Fish <fnf@cygnus.com>
50 * dwarfread.c (new_symbol): Use SYMBOL_VALUE_ADDRESS, instead of
51 SYMBOL_VALUE, to set the value of LOC_STATIC symbols.
53 Mon Jun 16 18:38:28 1997 Mark Alexander <marka@cygnus.com>
55 * infrun.c (wait_for_inferior): Mark registers as invalid when
56 stepping over an instruction that triggered a watchpoint.
57 * remote-mips.c: Numerous changes to support hardware breakpoints
58 and watchpoints on LSI MiniRISC and TinyRISC boards.
59 * mips-tdep.c: Move MIPS16-related macros to config/mips/tm-mips.h.
60 (mips_breakpoint_from_pc): Account for different breakpoint
61 instructions used by PMON and IDT monitor.
62 * config/mips/tm-embed.h: Enable hardware breakpoints on embedded
64 * config/mips/tm-mips.h: Define breakpoint instructions for
65 PMON and IDT monitor. Move MIPS16-related macros here from
68 Fri Jun 13 13:44:47 1997 Michael Snyder (msnyder@cleaver.cygnus.com)
70 * config/mips/tm-tx39[l].h, tx39[l].mt: change r3900 target to tx39.
72 Fri Jun 13 14:14:10 1997 Jeffrey A Law (law@cygnus.com)
74 * mn10300-tdep.c (mn10300_analyze_prologue): Fix some comments.
75 Add missing return statements after finding an "add imm{16,32},sp"
77 (mn10300_frame_chain): Add in size of our register save area to find
78 our caller's frame if our caller does not have a frame pointer.
80 Fri Jun 13 12:55:49 1997 Doug Evans <dje@canuck.cygnus.com>
82 * symfile.c (generic_load): Check return code of target_write_memory.
84 Fri Jun 13 10:28:09 1997 Fred Fish <fnf@cygnus.com>
86 * config/i386/nm-linux.h: Enable prototypes that were #ifdef out.
87 * config/tm-sysv4.h (in_plt_section): Add prototype.
89 * maint.c (maintenance_translate_address): Avoid assignment
90 inside if, per GNU coding standards.
91 * symfile.c (simple_read_overlay_table): Avoid assignments inside if,
92 per GNU coding standards.
94 * monitor.c (parse_register_dump): Is really a void function.
96 (monitor_read_memory): Remove unused variable "name".
97 (monitor_read_memory): Remove unused variable "regbuf".
98 (monitor_open): Remove unused variable "i".
99 (get_hex_word): Apparently unused, #if away for now.
102 * i386v4-nat.c (supply_fpregset): Remove unused variable "regi".
103 (fill_fpregset): Remove unused variables "regi", "to", "from" and
106 * remote-e7000.c (ctype.h): Include.
107 (e7000_insert_breakpoint): #if away unused arg used by unused expr.
108 * frame.h (generic_get_saved_register): Add prototype.
109 (enum lval_type): Add partial forward decl.
110 * dsrec.c (make_srec): Remove unused variable "type_code".
111 * remote-sim.c (gdbsim_wait): Handle sim_running and sim_polling
112 cases by just ignoring them.
113 (command.h): Include.
115 * java-exp.y (parse_number): Remove unused variable "unsigned_p".
116 * java-lang.c (gdbcore.h): Include for prototypes.
117 (type_from_class): Remove unused variable "ftype".
118 (type_from_class): Remove unused variable "name_length".
119 (evaluate_subexp_java): Add default case to handle remaining
121 * java-valprint.c (c-lang.h): Include for prototypes.
123 * symfile.c (simple_read_overlay_region_table): #if away
125 (simple_free_overlay_region_table): Ditto.
126 (overlay_is_mapped): Add default case to switch.
127 (simple_read_overlay_region_table): Ditto.
128 (simple_read_overlay_region_table): Add prototype.
130 * symtab.c (fixup_symbol_section): Remove unused msym variable.
131 (fixup_psymbol_section): Ditto.
132 (find_pc_sect_symtab): Make distance a CORE_ADDR.
134 * utils.c: Add comment about t_addr being either unsigned long or
136 (paddr): Change formats to match actual types args are cast to.
141 * defs.h (perror_with_name): Is a NORETURN function.
142 * utils.c (perror_with_name): Is a NORETURN function.
143 (error): Is NORETURN independently of ANSI_PROTOTYPES.
145 * symtab.c (fixup_symbol_section): Remove prototype.
146 * symtab.h: (fixup_symbol_section): Add prototype.
147 * m32r-rom.c (report_transfer_performance): Add prototype.
148 * sparclet-rom.c: Ditto.
151 * c-exp.y (parse_number): Cast args to float* or double* as
152 appropriate for conversion format.
153 * java-exp.y (parse_number): Ditto.
155 * Makefile.in (c-exp.tab.c): Remove #line lines that refer
156 to nonexistant y.tab.c file.
157 (java-exp.tab.c): Ditto.
158 (f-exp.tab.c): Ditto.
159 (m2-exp.tab.c): Ditto.
162 * gdbtk.c (gdbtk_init): Make truth value test explicit.
163 Remove unused static variable "Gdbtk_Library".
166 * sh-tdep.c (symfile.h): Include.
167 (gdb_string.h): Include.
168 (sh_fix_call_dummy): Ifdef away, currently unused.
169 * config/sh/tm-sh.h (pop_frame): Add prototype.
170 * config/sh/tm-sh.h (sh_set_processor_type): Add prototype.
172 Sat Jun 7 02:34:19 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
175 * gdbtk.c (gdb_get_breakpoint_info): Add string for new
176 enumeration del_at_next_stop to bpdisp array.
179 * eval.c (evaluate_subexp_for_sizeof): Handle dereferencing
180 of non-pointer values.
182 * symtab.c (gdb_mangle_name): Improve mangling of nested types,
183 their physical names already include the class name.
185 * valops.c (value_cast): Handle upcast of a class pointer.
187 From Andreas Schwab (schwab@issan.informatik.uni-dortmund.de):
188 * corelow.c (get_core_registers): Make secname big enough.
190 Fri Jun 6 14:43:23 1997 Keith Seitz <keiths@pizza.cygnus.com>
192 * config/sh/tm-sh.h: add define for FPSCR_REGNUM
193 * sh-tdep.c (sh_show_regs): print out all registers for
194 the current processor
196 Fri Jun 6 13:01:55 1997 Andrew Cagney <cagney@b1.cygnus.com>
198 * remote-sim.c (gdbsim_kill): Remove call to depreciated function
201 Thu Jun 5 11:39:03 1997 Ian Lance Taylor <ian@cygnus.com>
203 Fixes for recent correction to PE format:
204 * coffread.c (pe_file): New static variable.
205 (struct find_targ_sec_arg): Change resultp from pointer to int to
206 pointer to pointer to asection.
207 (find_targ_sec): Just store the section in args->resultp, not the
208 section offset value.
209 (cs_to_section): Compute the section offset value from the
211 (cs_section_address): New static function.
212 (coff_symfile_read): Set pe_file.
213 (read_one_sym): When reading a PE file, adjust the symbol value to
214 include the section address if the symbol has an appropriate
217 Tue Jun 3 16:24:46 1997 Michael Snyder (msnyder@cleaver.cygnus.com)
219 * configure.tgt: add mipsr3900-elf target
220 * config/mips/r3900.mt r3900l.mt tm-r3900.h tm-r3900l.h: ditto
223 Tue Jun 3 15:46:51 1997 Tom Tromey <tromey@cygnus.com>
225 * Makefile.in (LIB_RUNTIME_DIR): New variable.
228 Tue May 27 10:34:11 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
230 * dbxread.c: Check malloc's return for null, prevent segv.
232 Fri May 23 14:45:02 1997 Bob Manson <manson@charmed.cygnus.com>
234 * infcmd.c (jump_command): Don't try to dereference sfn if it's
237 Fri May 23 13:51:57 1997 Andrew Cagney <cagney@b1.cygnus.com>
239 * top.c (init_cmd_lists): Always initialize endianlist.
240 (init_main): Always define endian commands.
241 (set_endian_big): Issue warning if endian not selectable.
242 (set_endian_little): Ditto.
243 (set_endian_auto): Ditto.
245 Thu May 22 11:53:21 1997 Andrew Cagney <cagney@b1.cygnus.com>
247 * remote-sim.c (simulator_command): Restrict access to the
248 simulator to periods when the simulator is open.
250 Wed May 21 16:03:25 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
252 * procfs.c (init_procinfo): new function, abstracts some code
253 shared by create_procinfo and do_attach;
254 (procfs_set_inferior_syscall_traps): new function, abstracts
255 some code needed by procfs_init_inferior, do_attach, and
256 procfs_lwp_creation_handler; (procfs_first_available): new
257 function, find any LWP that's runnable; (procfs_thread_alive):
258 replace stub function with real implementation;
259 (procfs_lwp_creation_handler): fix bug starting new child
260 threads; (info_proc): bug fixes and enhancements for the
261 "INFO PROCESSES" command; (close_procinfo_file): call new
262 function "delete_thread" to cleanup GDB's thread database;
263 (proc_init_failed): add new argument "kill", to control whether
264 process is killed (so this function can be shared by
265 create_procinfo and do_attach); (procfs_exit_handler): handle
266 exit from an attached process, and cleanup procinfo handles
267 when the process exits; (procfs_resume, procfs_wait): cleanup
268 after a thread when it exits; (do_attach, do_detach): handle
269 attached processes with multiple threads; plus some general
270 improvements in the diagnostic output.
271 * sol-thread.c (sol_thread_alive): replace stub with real
272 implementation; (thread_to_lwp, lwp_to_thread): enhance to
273 handle threads that may have exited; (sol_thread_attach): add
274 startup setup stuff; (sol_thread_detach): add unpush_target
275 call; (sol_thread_mourn_inferior): add unpush_target call;
276 (sol_thread_wait, sol_thread_resume): enhance to deal with
277 thread exit cleanly; (sol_thread_new_objfile,
278 sol_thread_pid_to_str): detect unsuccessful startup and
279 don't crash; plus some general cleanup.
280 * thread.c (delete_thread): new function, allows targets to
281 notify gdb when a thread is no longer valid.
282 * infrun.c (wait_for_inferior): don't try to detect a new
283 thread on receiving a TARGET_EXITED event.
285 Tue May 20 09:32:02 1997 Andrew Cagney <cagney@b1.cygnus.com>
287 * remote-sim.c (gdbsim_open): Pass callback struct.
288 (init_callbacks): Remove call to sim_set_callbacks.
290 Thu May 15 07:56:50 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
292 * config/rs6000/tm-rs6000.h (SIG_FRAME_LR_OFFSET): Define.
293 * rs6000-tdep.c (frameless_function_invocation): Mark frames
294 with a zero PC as frameless to improve backtraces from core dumps
295 caused by dereferencing a NULL function pointer.
296 (frameless_function_invocation, frame_saved_pc, rs6000_frame_chain):
297 Handle frameless functions interrupted by a signal.
299 * sparc-tdep.c (sparc_init_extra_frame_info, sparc_frame_saved_pc):
300 Handle frameless functions interrupted by a signal.
302 Wed May 14 08:58:55 1997 Jeffrey A Law (law@cygnus.com)
304 * mn10200-tdep.c (mn10200_analyze_prologue): Update prologue comments
305 to reflect current reality. Gross attempt at handling out of
308 * mn10200-tdep.c (mn10200_skip_prologue): Don't look at the debug
309 symbols to find the end of the prologue.
310 * mn10300-tdep.c (mn10300_skip_prologue): Likewise.
313 Wed May 14 12:04:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
315 * config/tic80/tm-tic80.h (NUM_REGS): 38 not 37.
319 Mon May 12 11:35:04 1997 Mark Alexander <marka@cygnus.com>
321 * tic80-tdep.c, config/tic80/tm-tic80.h: First cut at getting
322 basic C80 features working.
325 Thu May 8 08:42:47 1997 Andrew Cagney <cagney@b1.cygnus.com>
327 * configure.in (AC_TYPE_SIGNAL): Add
328 * configure: Re-generate.
329 * remote-sim.c: Signal returns RETSIGTYPE.
332 Wed May 7 19:10:19 1997 Andrew Cagney <cagney@b1.cygnus.com>
334 * gdbtk.c (wrapped_call): New function - make actual call to tk
336 (call_wrapper): Rewrite to use top.c:catch_errors.
338 * gdbtk.c (gdb_stop): If No target_stop set quit flag and hope for
342 Wed May 7 20:05:07 1997 Andrew Cagney <cagney@b1.cygnus.com>
344 * target.h (target_stop): Drop argument so it can be tested for
347 Sat May 3 20:51:48 1997 Mark Alexander <marka@cygnus.com>
349 * utils.c (floatformat_from_doublest): Handle infinity properly.
351 Thu May 1 11:44:46 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
353 * Finalize merge from Hurd folk.
354 Mon Oct 30 16:41:04 1995 Miles Bader <miles@gnu.ai.mit.edu>
355 * thread.c (thread_apply_command, thread_apply_all_command,
356 thread_command): Make sure TP is alive.
357 (thread_alive): New function.
358 Tue Nov 14 14:31:03 1995 Miles Bader <miles@gnu.ai.mit.edu>
359 * infrun.c (sig_print_info): Deal better with long signal names.
360 Wed Nov 22 15:23:35 1995 Miles Bader <miles@gnu.ai.mit.edu>
361 * thread.c (thread_id_to_pid): New function.
362 Fri Dec 1 13:25:25 1995 Miles Bader <miles@gnu.ai.mit.edu>
363 * gnu-nat.c: (set_thread_cmd_list, show_thread_cmd_list,
364 set_thread_default_cmd_list, show_thread_default_cmd_list):
365 New variables. (set_thread_cmd, show_thread_cmd,
366 set_thread_default_cmd, show_thread_default_cmd): New functions.
367 Fri Apr 18 15:20:16 1997 Miles Bader <miles@gnu.ai.mit.edu>
368 * gnu-nat.c (inf_startup): remove TASK parameter.
369 (inf_set_task): replace with new function (inf_set_pid).
370 * gdbthread.h: Add extern decl for thread_cmd_list.
372 Thu May 1 02:28:21 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
374 * printcmd.c (disassemble_command): Adjust low function bound
375 by FUNCTION_START_OFFSET.
378 Wed Apr 30 15:23:02 1997 Andrew Cagney <cagney@b1.cygnus.com>
380 * config/tic80/tm-tic80.h (BREAKPOINT): Set it to trap 73.
383 Mon Apr 28 21:25:32 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
385 * Makefile.in: Add rule for gnu-nat.o and i386gnu-nat.o (Gnu Hurd)
386 * config/i386/i386gnu.mh: remove rules for [i386]gnu-nat.o, now
387 in Makefile.in (as for other targets); add NATDEPFILE corelow.o to
388 satisfy symbol dependancy in solib.c (core_ops).
389 * target.[ch] conditionalize Mach-specific signals so that they
390 won't show up in non-Mach gdb's!
391 * thread.c: change name of static function "thread_switch" to
392 "switch_to_thread", to avoid conflict with Mach global symbol;
393 move thread_cmd_list to global scope so targets can add their
395 * infrun.c: sig_print_info: allow for long signal names.
396 * gnu-nat.[ch]: tidying up comments.
397 * gnu-nat.c: remove calls to prune_threads and renumber_threads;
398 gnu_wait must not return -1 when inferior exits;
399 attach_to_child will modify inferior_pid in a way that allows
400 fork_inferior to remain unchanged; remove extra arg from
401 startup_inferior; move Mach thread commands here from thread.c.
403 Mon Apr 28 18:21:20 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
405 * symtab.c: decode_line_1, replace the assignment to
406 values.sals[0].pc which I accidentally left out on 4/3/97.
408 Mon Apr 28 17:27:40 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
410 * c-exp.y, java-exp.y: make parse_number reject "123DEADBEEF".
412 * top.c: change "to enable to enable" to "to enable" in a couple
415 Mon Apr 28 09:01:59 1997 Mark Alexander <marka@cygnus.com>
417 * breakpoint.c (remove_breakpoint): Pass correct type to
418 target_remove_watchpoint.
419 * target.h: Improve comment for target_{remove,insert}_breakpoint.
421 Sat Apr 26 03:38:02 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
423 * alpha-tdep.c (heuristic_proc_desc): Increase search limit
424 for return address register, handle `ret' instruction.
426 * corelow.c (get_core_registers): Initialize cf.
428 * procfs.c: Minor changes to make pre-ANSI compilers happy.
429 (procfs_notice_signals): Copy traced signal set back to
431 (unconditionally_kill_inferior): If PR_DEAD is defined,
432 rerun inferior after killing it.
434 Fri Apr 25 00:10:18 1997 Jeffrey A Law (law@cygnus.com)
436 * config/mn10300/tm-mn10300.h (EXTRACT_STRUCT_VALUE_ADDRESS): The
437 structure value address is found in $a0 now.
438 * config/mn10200/tm-mn10200.h (EXTRACT_STRUCT_VALUE_ADDRESS): Likewise.
440 Thu Apr 24 13:31:10 1997 Jeffrey A Law (law@cygnus.com)
442 * config/mn10300/tm-mn10300.h (STORE_RETURN_VALUE): Pointers are
444 (EXTRACT_RETURN_VALUE): Likewise.
446 * mn10300-tdep.c (mn10300_analyze_prologue): Check for a return
447 insn at "pc", not "fi->pc".
450 Thu Apr 24 16:11:47 1997 Andrew Cagney <cagney@b1.cygnus.com>
452 * config/tic80/tm-tic80.h (NUM_REGS): Four 64bit accumulators.
453 (REGISTER_BYTE, REGISTER_RAW_SIZE, REGISTER_SIZE,
454 MAX_REGISTER_RAW_SIZE, REGISTER_VIRTUAL_TYPE): Adjust.
455 (NPC_REGNUM): Tic80 has a delay slot.
456 (R0_REGNUM, Rn_REGNUM, An_REGNUM): For sim, provide base/bound for
460 Wed Apr 23 11:18:45 1997 Jeffrey A Law (law@cygnus.com)
462 * config/mn10200/tm-mn10200.h (STORE_RETURN_VALUE): Pointers are
464 (EXTRACT_RETURN_VALUE): Likewise.
466 Tue Apr 22 11:58:15 1997 Fred Fish <fnf@cygnus.com>
468 * config/arm/tm-arm.h (TARGET_DOUBLE_FORMAT): Define to use
469 floatformat_ieee_double_littlebyte_bigword for little endian
471 * utils.c (floatformat_to_doublest): Create local preswapped
472 copy of input for floatformat_littlebyte_bigword formats.
473 (get_field, put_field): Treat floatformat_littlebyte_bigword
474 the same as floatformat_little.
475 (floatformat_from_doublest): Postswap output words for
476 the floatformat_littlebyte_bigwords format.
479 Mon Apr 21 22:44:47 1997 Andrew Cagney <cagney@b1.cygnus.com>
481 * config/tic80/tic80.mt (SIM): Link in simulator.
484 Tue Apr 22 09:02:10 1997 Stu Grossman (grossman@critters.cygnus.com)
486 * config/alpha/alpha-osf3.mh config/i386/{i386gnu linux}.mh
487 config/mips/{embed embed64 embedl embedl64 vr4300 vr4300el vr5000
488 vr5000el}.mt config/powerpc/{aix aix4}.mh config/rs6000/{aix
489 aix4}.mh config/sh/sh.mt config/sparc/sp64sim.mt:
493 Remove -lm. That's now handled by configure.
495 * Makefile.in (maintainer-clean): Add distclean to dependencies.
496 Remove duplicate rm's of files.
499 Mon Apr 21 14:00:08 1997 Doug Evans <dje@canuck.cygnus.com>
501 * gdbtk.c (gdb_disassemble): Store endian-ness in `di'.
504 Mon Apr 21 09:49:25 1997 Stu Grossman (grossman@critters.cygnus.com)
506 * remote-pa.c: Remove. It's broken and no longer necessary.
508 Sat Apr 19 11:56:10 1997 Per Bothner <bothner@deneb.cygnus.com>
510 * java-exp.y: Combine TRUE and FALSE into BOOLEAN_LITERAL.
511 (Avoids name clash with broken AIX header files.)
513 Sat Apr 19 01:49:37 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
515 * serial.c (serial_log_command): Fix fputs_unfiltered calls.
517 * config/powerpc/tm-ppc-aix4.h, config/rs6000/tm-rs6000-aix4.h
518 (DONT_RELOCATE_SYMFILE_OBJFILE): Removed.
519 * xcoffsolib.h (struct vmap): Add new members tvma, toffs and dvma,
521 * exec.c (bfdsec_to_vmap): Initialize new vmap members, initialize
522 tstart and dstart with section VMA.
523 * rs6000-nat.c (vmap_symtab): Relocate relative to the VMA in the
525 (vmap_ldinfo, xcoff_relocate_core): Adjust tstart by section offset
526 of the text section, remove DONT_RELOCATE_SYMFILE_OBJFILE hack.
527 (vmap_exec): Relocate relative to the VMA in the object file,
528 relocate .bss section as well.
529 (xcoff_relocate_core): No longer adjust section addresses by VMA.
530 * rs6000-tdep.c (find_toc_address): Change type of tocbase
532 * xcoffread.c (secnum_to_bfd_section): New routine to get
533 BFD section from CS section number.
534 (scan_xcoff_symtab): Make toc_offset section relative.
536 * symtab.c (total_number_of_methods): Avoid core dump if
537 baseclass type is still undefined.
539 Fri Apr 18 17:25:10 1997 Stu Grossman (grossman@critters.cygnus.com)
541 * Makefile.in (SUBDIRS): Add mswin so that make cleanup cleans up
543 * defs.h utils.c (error warning): Make message be const.
544 * main.c (fputs_unfiltered): Only send gdb_stdout and gdb_stderr
545 to hook. Otherwise send it to fputs.
546 * monitor.c monitor.h (monitor_get_dev_name): New function. Does
548 * remote-e7000.c: Remove debugify stuff. Change printf, fprintf
549 to _filtered forms to make output appear in GUIs. Replace all
550 uses of SERIAL_READCHAR with readchar, which has better error
552 * (e7000_parse_device): Add prototype.
553 (readchar): Improve doc. Handle random serial errors.
554 (expect): Disable notice_quit code. It's busted. Remove
555 serial error handling (it's now handled in readchar). Remove
556 remote_debug echoing. That's handled in readchar as well.
557 (e7000_parse_device): Remove serial_flag arg. It's not
559 (e7000_open): Split into two pieces. Second part is
560 e7000_start_remote, and is error protected. Now, when we connect
561 to the target, we setup the initial frame and registers so that
562 the user gets an immediate indication of where the target is.
563 (gch): Remove debug output. That's handled by readchar.
564 (e7000_read_inferior_memory): Handle errors better.
565 (_initialize_remote_e7000): Get rid of `<xxx>' things from
566 command names. They show up when doing completion and confuse
568 * ser-e7kpc.c: Get rid of the DLL's since we can access the device
569 directly from Win32s and Win95. Get rid of debugify crud.
570 * serial.c: Remove debugify cruft.
571 * (serial_logchar serial_log_command serial_write serial_readchar
572 serial_send_break serial_close): Merge common functionality into
573 serial_logchar. Clean up rest of routines.
574 * sparclet-rom.c: Disembowel. Leave only download routine.
575 Download routine now switches to remote target automatically.
576 * top.c (disconnect): Only define if SIGHUP is defined. Cleans
577 up MSVC/Win32 problem.
578 * utils.c (gdb_flush): Don't call hook unless it's for gdb_stdout
580 * config/sh/tm-sh.h: Define TARGET_SH for WinGDB.
581 * config/sparc/tm-sparclet.h: Remove override for prompt.
583 Fri Apr 18 13:38:19 1997 Doug Evans <dje@canuck.cygnus.com>
585 * remote-sim.c (gdbsim_open): Only pass -E to sim_open if
586 TARGET_BYTE ORDER_SELECTABLE.
588 Fri Apr 18 16:52:41 1997 Andrew Cagney <cagney@b1.cygnus.com>
590 * remote-sim.c (init_callbacks): Initialize poll_quit and magic
591 fields of gdb_callback.
592 (gdbsim_stop): Add gdbsim_stop to list of supported client
594 (gdbsim_wait, gdbsim_resume): Move call to sim_resume into
595 sim_wait where gdb is in a position to handle a long running
597 (gdbsim_cntrl_c): New function. Wrap the sim_resume call in a
599 (gdb_os_poll_quit): New function. Check for a quit pending on the
603 Wed Apr 16 12:33:06 1997 Andrew Cagney <cagney@b1.cygnus.com>
605 * Makefile.in (install-only): Make list of gdbtcl files to install
606 explicit - was picking up files such as ChangeLog etc.
607 (install-only): Don't blindly create the directory.
610 Thu Apr 17 14:30:04 1997 Per Bothner <bothner@deneb.cygnus.com>
612 * defs.h (enum language): Add language_java.
613 * java-exp.y, java-lang.c, java-lang.h, java-valprint.c: New files.
614 * Makefile.in: Update for new files.
615 * objfiles.c (allocate_objfile): Allow NULL bfd argument.
616 * symfile.c (deduce_language_from_filename): Recognize .java.
618 Thu Apr 17 02:20:23 1997 Doug Evans <dje@canuck.cygnus.com>
620 * m32r-stub.c (stash_registers): Rewrite.
621 (restore_registers): Renamed to restore_and_return.
622 (cleanup_stash): New function.
623 (process_exception): New function.
624 (_catchException*): Rewrite.
626 * remote-sim.c (gdbsim_load): Update call to sim_load.
627 (gdbsim_create_inferior): No longer pass start_address to
629 (gdbsim_open): Pass endian indicator as arg.
631 Tue Apr 15 15:31:09 1997 Stan Shebs <shebs@andros.cygnus.com>
633 * remote.c (get_offsets): Don't use scanf for interpreting
634 response to qOffsets.
636 Tue Apr 15 14:51:04 1997 Ian Lance Taylor <ian@cygnus.com>
638 * gdbserver/Makefile.in (INSTALL_XFORM): Remove.
639 (INSTALL_XFORM1): Remove.
640 (install-only): Use $(program_transform_name) directly, rather
641 than using $(INSTALL_XFORM) and $(INSTALL_XFORM1).
642 (uninstall): Transform name.
644 Mon Apr 14 17:06:27 1997 Mark Alexander <marka@cygnus.com>
646 * remote-mips.c (mips_load): Ensure that PC gets updated
647 after a load on LSI target.
649 Mon Apr 14 15:54:51 1997 Geoffrey Noer <noer@pizza.cygnus.com>
651 * procfs.c (notice_signals): fix typo
653 Mon Apr 14 16:25:10 1997 Ian Lance Taylor <ian@cygnus.com>
655 * gdbserver/Makefile.in (INSTALL): Change install.sh to
658 Mon Apr 14 11:55:27 1997 Geoffrey Noer <noer@pizza.cygnus.com>
660 * config/i386/cygwin32.mh: remove -lkernel32 from XM_CLIBS
661 since gcc automatically includes it
663 Thu Apr 10 13:20:53 1997 Geoffrey Noer <noer@cygnus.com>
665 * procfs.c: Substantial (but incomplete) changes to support
666 sysv4.2mp procfs as implemented in UnixWare 2.1. The procinfo
667 struct now has substructs like struct flt_ctl instead of
668 just a fltset_t and has a ctl_fd, status_fd, as_fd, and
669 map_fd instead of a single fd. Non-sysv4.2mp procfs models
670 still have the structs and multiple fds, but don't use the
671 entire struct and the four fds all point to the same thing.
672 We use PROCFS_USE_READ_WRITE to decide whether to talk to
673 procfs with reads/writes or use ioctl instead. We use
674 HAVE_MULTIPLE_PROC_FDS to determine whether procfs really has
675 multiple fds or not. PROC_NAME_FMT is split out into
676 CTL_PROC_NAME_FMT, AS_PROC_NAME_FMT, MAP_PROC_NAME_FMT,
677 STATUS_PROC_NAME_FMT.
679 (procfs_notice_signals): now a necessary wrapper around
680 (notice_signals): which are the new guts for noticing signals
681 (open_proc_file): gets a new flag arg used in sysv4.2mp to
682 determine whether or not to attempt to open the ctl_fd.
683 (procfs_read_status): new local function, reads procfs status
684 (procfs_write_pcwstop): new local function, writes a PCWSTOP
685 (procfs_write_pckill): new local function, writes a PCKILL
686 (unconditionally_kill_inferior): remove signo since we now
687 just call procfs_write_pckill().
688 (procfs_xfer_memory): call lseek with SEEK_SET rather than 0
689 (proc_iterate_over_mappings): the whole function is ifdefed
690 on UNIXWARE to keep things readable.
692 Expanded the syscall_table to include new potential sysv4.2mp
693 members. Note that all ifdefs of UNIXWARE should be eliminated
694 if possible or renamed to describe what's being selected for a
695 bit better. Sysv4.2mp and IRIX both have SYS_sproc so the
696 IRIX specific code now also checks it's not UNIXWARE.
698 * config/i386/tm-i386v42mp.h: also define HAVE_PSTATUS_T,
699 HAVE_NO_PRRUN_T, PROCFS_USE_READ_WRITE, and UNIXWARE
700 * config/mips/nm-irix4.h: set CTL_PROC_NAME_FMT et al to
701 "/debug/%d" as PROC_NAME_FMT used to be
703 Wed Apr 9 11:36:14 1997 Jeffrey A Law (law@cygnus.com)
705 * mn10300-tdep.c: Almost completely rewritten based on mn10200
707 * config/mn10300/tm-mn10300.h: Likewise.
709 Tue Apr 8 10:45:24 1997 Stu Grossman (grossman@critters.cygnus.com)
711 * config/pa/{hppabsd.mt hppahpux.mt hppaosf.mt}: Remove
712 remote-pa.o from TDEPFILES. Nobody uses it, and besides, it's a
713 lousy out-of-date clone of remote.c.
715 Fri Apr 4 08:21:21 1997 Stu Grossman (grossman@critters.cygnus.com)
717 * remote.c: Fix problems realized while showering.
718 * (hexnumlen): Add prototype. Use max, not min.
719 * (remote_write_bytes remote_read_bytes): Fix max packet size
720 calculations to properly account for packet overhead. Also handle
721 (probably rare) case where remote_register_buf_size isn't set.
723 * remote.c: Fix doc for `C' and `S' commands to indicate full
725 * (remote_ops extended_remote_ops remote_desc remote_write_size):
727 * (remote_fetch_registers remote_write_bytes remote_read_bytes):
728 Record size of response to fetch registers command, use this to
729 limit size of memory read and write commands.
730 * (push_remote_target): New function to make it possible to have
731 another target switch to the remote target.
732 * target.h: Add prototype for push_remote_target.
733 * sh-tdep.c (sh_frame_find_saved_regs): Fix sign extension bugs
734 for hosts which default to unsigned chars (such as SGI's).
735 * (_initialize_sh_tdep): Don't set remote_write_size. It's now
736 handled automatically in remote.c.
738 Thu Apr 3 15:10:30 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
740 * blockframe.c: blockvector_for_pc_sect(), block_for_pc_sect(),
741 find_pc_sect_function(), find_pc_sect_partial_function(): new
742 functions for debugging overlays; pc without section is ambiguous.
743 * breakpoint.[ch]: add section pointer to breakpoint struct;
744 add section argument to check_duplicates(); check section as well
745 as pc in [breakpoint_here_p(), breakpoint_inserted_here_p(),
746 breakpoint_thread_match(), bpstat_stop_status()];
747 add section argument to describe_other_breakpoints();
748 use INIT_SAL() macro to zero-out new sal structures;
749 make resolve_sal_pc() fix up the sal's section as well as its pc;
750 match on section + pc in clear_command() and delete_breakpoint();
751 account for overlay sections in insert_breakpoints(),
752 remove_breakpoint() and breakpoint_re_set_one();
753 all this to support overlays where a PC is not unique.
754 * exec.c: change xfer_memory() to handle overlay sections.
755 * findvar.c: change read_var_value() to handle overlay sections.
756 * frame.h: declaration for block_for_pc_sect() [blockframe.c].
757 * infcmd.c: jump_command() warns against jumping into an overlay
758 that's not in memory. Also use INIT_SAL() to initialize sals.
759 * infrun.c: wait_for_inferior() sets a flag to invalidate cached
760 overlay state information; Also use INIT_SAL() to init sals.
761 * m32r-rom.c: modify load routines to use LMA instead of VMA.
762 * m32r-stub.c: mask exit value down to 8 bits; screen out any
763 memory read/writes in the range 600000 to a00000, and ff680000
764 to ff800000 (hangs because nothing is mapped there); fix strcpy().
765 * maint.c: maintenance command "translate-address" supports overlays.
766 * minsyms.c: lookup_minimal_symbol_by_pc_sect() supports overlays.
767 * objfiles.[ch]: add ovly_mapped field to the obj_section struct;
768 this constitutes gdb's internal overlay mapping table. Add macro
769 ALL_OBJSECTIONS() to loop thru the obj_structs and look at overlays.
770 Add function find_pc_sect_section().
771 * printcmd.c: modify print_address_symbolic() with overlay smarts;
772 modify address_info() with overlay smarts; add function sym_info()
773 to support the INFO SYMBOL command (translate address to symbol(s));
774 modify disassemble_command() to work on unmapped overlays.
775 * source.c: use INIT_SAL() to initialize sals.
776 * symfile.[ch]: change generic_load() to use section's LMA address
777 instead of VMA address, for overlay sections.
778 Add numerous functions for finding a PC's section / overlay,
779 translating between VMA and LMA address ranges, determining if an
780 overlay section is mapped, etc. Add several user commands for
781 overlay debugging. Add support for a "generic" form of automatically
782 reading overlay mapping info from the inferior (based on the default
783 (simple) overlay manager which Cygnus provides as an example).
784 * symtab.[ch]: add functions find_pc_sect_symtab(),
785 find_pc_sect_psymtab(), find_pc_sect_psymbol(), find_pc_sect_line()
786 for lookup; modify lookup_symbol and decode_line_1() to use them;
787 modify find_function_start_sal() to account for overlay sections;
788 add macro INIT_SAL() for initializing struct symtab_and_line.
789 * target.c: fix a comment in the declaration of target_ops.
791 Thu Apr 3 10:31:12 1997 Mark Alexander <marka@cygnus.com>
793 * mips-tdep.c (mips_in_call_stub, mips_in_return_stub,
794 mips_skip_stub, mips_ignore_helper): New functions for dealing
795 with MIPS16 call/return thunks.
796 (mips_init_frame_pc_first): New function to implement
797 INIT_FRAME_PC_FIRST macro; includes code from old macro plus
798 new code to skip over MIPS16 thunks.
799 (mips_frame_chain): Skip over MIPS16 thunks.
800 * config/mips/tm-mips.h (mips_in_call_stub, mips_in_return_stub,
801 mips_skip_stub, mips_ignore_helper): Declare.
802 (IN_SOLIB_CALL_TRAMPOLINE, IN_SOLIB_RETURN_TRAMPOLINE,
803 SKIP_TRAMPOLINE_CODE, IGNORE_HELPER_CALL): New macros that invoke
805 (INIT_FRAME_PC_FIRST): Change to invoke mips_init_frame_pc.
806 (mips_init_frame_pc): Declare.
807 * infrun.c (wait_for_inferior): Use new IGNORE_HELPER_CALL macro
808 to decide if certain library function calls should be ignored.
810 Wed Apr 2 14:16:51 1997 Doug Evans <dje@canuck.cygnus.com>
812 * remote-sim.c (gdbsim_open): Check return code from sim_open.
813 Update call to sim_open (new arg SIM_OPEN_DEBUG).
816 Tue Apr 1 15:04:21 1997 Jason Molenda (crash@godzilla.cygnus.co.jp)
818 * configure.in (gdbtcl): Create soft-link for gdbtcl/ directory instead
822 Mon Mar 31 14:55:53 1997 Ian Lance Taylor <ian@cygnus.com>
824 * gdbinit.in: New file.
826 * configure.in: Generate .gdbinit from gdbinit.in.
827 * configure: Rebuild.
830 Sun Mar 30 12:28:24 1997 Fred Fish <fnf@cygnus.com>
832 * config/tic80/tic80.mt: Disable using the simulator
836 Sat Mar 29 13:57:20 1997 Fred Fish <fnf@cygnus.com>
838 * COPYING: Install new version of file from FSF.
839 * copying.c (show_copying_command): Update FSF address.
841 Fri Mar 28 18:33:41 1997 Ian Lance Taylor <ian@cygnus.com>
843 * Makefile.in (distclean): Remove .gdbinit.
846 Fri Mar 28 15:37:30 1997 Fred Fish <fnf@cygnus.com>
848 * config/tic80/tm-tic80.h (NAMES_HAVE_UNDERSCORE): Define.
851 Fri Mar 28 15:38:04 1997 Mike Meissner <meissner@cygnus.com>
853 * remote-sim.c (gdb_os_{,e}vprintf_filtered): Change stdarg type
854 to va_list from void *, since va_list might not be a pointer
858 Fri Mar 28 17:04:02 1997 Jason Molenda (crash@godzilla.cygnus.co.jp)
860 * Makefile.in (gdbtk.o): look for GDBTK_LIBRARY in $(datadir) by
861 default, not $(srcdir).
864 Thu Mar 27 14:21:46 1997 Mark Alexander <marka@cygnus.com>
866 * remote-mips.c: Clean up comment and extraneous semicolon
867 for mips_monitor_prompt variable.
869 Thu Mar 27 12:46:58 1997 Mark Alexander <marka@cygnus.com>
871 * remote-mips.c: Add `set monitor-prompt' command.
873 Wed Mar 26 06:47:44 1997 Mark Alexander <marka@cygnus.com>
875 Fix from Peter Schauer:
876 * mdebugread.c (parse_procedure): Set address of procedure to
877 block start; this fixes problems with shared libraries introduced
880 Mon Mar 24 19:43:16 1997 Geoffrey Noer <noer@cygnus.com>
882 * symtab.c (find_pc_symtab): change to support the case
883 where the objfile is reordered and contains both coff and
884 stabs debugging info (continue on if a psymtab isn't found).
886 Sun Mar 23 16:19:20 1997 Mark Alexander <marka@cygnus.com>
888 Fixes from Peter Schauer:
889 * config/mips/tm-mips.h (REGISTER_CONVERT_TO_TYPE,
890 REGISTER_CONVERT_FROM_TYPE): Swap words if target, not host,
891 is big-endian and if registers are 32 bits.
892 * mips-tdep.c (mips_print_register, mips_extract_return_value,
893 mips_store_return_value): Fix floating-point word-order problems on
894 little-endian targets introduced by changes of Mar 21.
896 Sun Mar 23 15:43:27 1997 Stan Shebs <shebs@andros.cygnus.com>
898 * remote.c (target_resume_hook, target_wait_loop_hook): New
900 (remote_resume, remote_wait): Use them.
901 * d10v-tdep.c: Set the above hooks.
902 (tracesource): New GDB variable, controls source display in
904 (display_trace): Find and display source line if requested.
905 (trace_info): Mention empty trace buffer if appropriate.
906 (tdisassemble_command): Robustify argument handling.
908 * configure.host: Remove extra bogus Linux case.
910 Sat Mar 22 16:41:35 1997 Fred Fish <fnf@cygnus.com>
912 * remote-sim.c (simulator_command): Add comment about dealing with
915 * Makefile.in (tic80-tdep.o): Add target.
916 * configure.tgt: Add tic80 case.
917 * tic80-tdep.c: New file.
918 * config/tic80/{tic80.mt, tm-tic80.h}: New files.
921 Sat Mar 22 02:48:11 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
923 * c-exp.y (yylex): Handle nested template parameter lists.
924 * symtab.c (decode_line_2): Fix test for valid choice number.
926 Fri Mar 21 19:10:05 1997 Mark Alexander <marka@cygnus.com>
928 * mips-tdep.c (mips_push_arguments): On non-EABI architectures,
929 copy first two floating point arguments to general registers, so that
930 MIPS16 functions will receive the arguments correctly.
931 (mips_print_register): Print double registers correctly on
933 (mips_extract_return_value): Return double values correctly
934 on little-endian hosts.
936 * mdebugread.c (parse_procedure): Adjust address of procedure relative
937 to address in file descriptor record; this accounts for constant
938 strings that may precede functions in the text section. Remove
939 now-useless lowest_pdr_addr from argument list and all calls.
941 Fri Mar 21 15:36:25 1997 Michael Meissner <meissner@cygnus.com>
943 * configure.tgt (powerpc*-{eabi,linux,sysv,elf}*): Determine
944 whether the simulator will be built by whether the Makefile in the
945 simulator directory was built.
947 * configure.in (--enable-sim-powerpc): Delete switch.
948 * configure: Regenerate.
950 Thu Mar 20 20:52:04 1997 Jeffrey A Law (law@cygnus.com)
952 * mn10200-tdep.c (mn10200_analyze_prologue): Look for save of "a1"
955 * remote-sim.c (gdb_os_vprintf_filtered): Fix to work with non-ANSI
957 (gdb_os_evprintf_filtered): Similarly.
959 Wed Mar 19 16:13:22 1997 Geoffrey Noer <noer@pizza.cygnus.com>
961 New UnixWare 2.1 configuration
962 * config/i386/i386v42mp.mt: new
963 * config/i386/i386v42mp.mh: new
964 * config/i386/tm-i386v42mp.h: new
965 * config/i386/nm-i386v42mp.h: new
966 * configure.tgt: added new entries
967 * configure.host: added new entries
970 Wed Mar 19 15:16:17 1997 Martin M. Hunt <hunt@onions.cygnus.com>
972 * Makefile.in: Install gdbtcl dir instead of gdbtk.tcl.
974 * gdbtk.c: Added some ifdefs for Windows. Changed GDBTK_FILENAME
975 to GDBTK_LIBRARY, which is now a path to search.
976 (gdb_path_conv): New function. Convert Cygwin32 pathname to
979 * {aclocal.m4,configure.in}: Changes for Windows builds.
981 * configure: Rebuilt.
984 Mon Mar 17 17:52:00 1997 J.T. Conklin <jtc@cygnus.com>
986 * dsrec.c (load_srec): Print leading zeroes when printing section
989 Mon Mar 17 15:00:16 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
991 * remote-sim.h: Delete - moved to ../include/remote-sim.h.
993 * Makefile.in (remote_utils_h): Update path to remote-sim.h.
995 Fri Mar 7 20:55:28 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
997 * remote-sim.c (flush_stdout, write_stderr, flush_stderr,
998 vprintf_filtered, evprintf_filtered): Callbacks that accept
1001 Sat Mar 15 00:50:46 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1003 * breakpoint.c (insert_breakpoints, watchpoint_check,
1004 bpstat_stop_status): Do not disable watchpoints going out of scope.
1005 (insert_breakpoints): Make sure that the current frame is valid
1006 before calling find_frame_addr_in_frame_chain.
1008 * top.c (setup_user_args): Handle quotes and backslashes.
1009 (print_gdb_version): Update copyright year.
1011 Fri Mar 14 15:44:03 1997 Ian Lance Taylor <ian@cygnus.com>
1013 * Makefile.in (elfread.o): Depend upon elf-bfd.h and elf/mips.h.
1015 start-sanitize-gdbtk
1016 Fri Mar 14 10:01:29 1997 Tom Tromey <tromey@cygnus.com>
1018 * configure: Regenerated.
1019 * configure.in (LIBS): Re-reverse order of TCL_LIBS and TK_LIBS.
1022 Thu Mar 13 22:51:00 1997 Dawn Perchik <dawn@cygnus.com>
1024 * utils.c (pollquit, notice_quit): If _WIN32, limit test for
1026 (initialize_utils): If _WIN32, don't call ScreenRows and ScreenCols
1027 except under wingdb. (Contributed by Martin Hunt).
1029 Thu Mar 13 12:40:49 1997 Tom Tromey <tromey@cygnus.com>
1031 * configure: Regenerated.
1032 * configure.in: Run AC_CONFIG_AUX_DIR before AC_CANONICAL_SYSTEM.
1034 Thu Mar 13 11:00:22 1997 Doug Evans <dje@canuck.cygnus.com>
1036 * remote-sim.h (sim_state, SIM_DESC): New types.
1037 (sim_open): Return a `descriptor' as result.
1038 (*): New argument of descriptor result from sim_open.
1039 * remote-sim.c (gdbsim_desc): Renamed from gdbsim_open_p.
1040 (gdbsim_open): Record result of sim_open in gdbsim_desc.
1041 Pass argv list to sim_open, argv[0] = pseudo program name.
1042 (*): Pass gdbsim_desc to sim_foo fns.
1044 Wed Mar 12 14:40:06 1997 Tom Tromey <tromey@cygnus.com>
1046 * config.in: Regenerated.
1048 * acconfig.h (START_INFERIOR_TRAPS_EXPECTED, sys_quotactl,
1049 HAVE_HPUX_THREAD_SUPPORT): Define.
1051 start-sanitize-gdbtk
1052 Wed Mar 12 14:29:52 1997 Tom Tromey <tromey@cygnus.com>
1054 * gdbtk.c (x_event): Use Tcl_DoOneEvent, TCL_DONT_WAIT,
1057 * configure: Regenerated.
1058 * configure.in (ENABLE_GDBTK): Put TCL_LIBS after TK_LIBS in
1062 Tue Mar 11 07:25:27 1997 Mark Alexander <marka@cygnus.com>
1064 First cut at supporting simulators in gdbserver:
1066 * configure, configure.in: Allow gdbserver to be configured
1067 for cross-target environments.
1068 * gdbserver/Makefile.in: Add simulator support.
1069 * gdbserver/configure.in: Eliminate assumption that host == target.
1070 Simplify using gdb/configure.tgt and gdb/configure.host.
1071 Fix other minor configuration errors.
1072 * gdbserver/low-sparc.c: Fix compile error.
1073 * gdbserver/remote-utils.c: Eliminate assumption that registers
1074 and addresses are four bytes. Fix minor compile errors and warnings.
1075 * gdbserver/server.c: Rewrite numerous instances of identical code
1076 for starting inferior processes to call new function start_inferior.
1077 Eliminate assumption that registers and addresses are four bytes.
1078 * gdbserver/server.h: Add missing prototypes to eliminate compiler
1080 * gdbserver/low-sim.c: New file to mate gdbserver with simulators.
1081 * config/mips/vr5000.mt: Add Vr5000 simulator support to gdbserver.
1082 * config/i386/linux.mh: Eliminate gdbserver support as a first step
1083 in moving such support from host to target makefile fragments.
1084 * config/i386/linux.mt: Move gdbserver support here from linux.mh.
1086 Mon Mar 10 12:27:47 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
1088 * symtab.h (INIT_SAL): New macro to initialize symtab_and_line,
1089 to insure consistant initialization of unused fields to zero.
1090 * symtab.c: replace initializations of sals with new macro INIT_SAL.
1091 * breakpoint.c: ditto.
1094 * source.c: add call to INIT_SAL macro.
1096 Sat Mar 8 00:16:37 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1098 * sparc-tdep.c (isbranch): Always handle v9 branch instructions,
1099 they might get used on 32 bit targets as well.
1101 Wed Mar 5 19:34:09 1997 Bob Manson <manson@charmed.cygnus.com>
1103 * remote-mips.c (mips_exit_debug): Some IDT boards don't
1104 send the full exit string.
1106 Wed Mar 5 12:59:27 1997 Jeffrey A Law (law@cygnus.com)
1108 * mn10200-tdep.c (mn10200_push_arguments): Handle new calling
1110 (mn10200_store_struct_return): Likewise.
1112 Tue Mar 4 10:31:02 1997 Mark Alexander <marka@cygnus.com>
1114 * mips-tdep.c (mips_fetch_instruction): New function; replace
1115 common code throughout with calls to it.
1116 (mips_find_saved_regs): Examine MIPS16 entry instruction to determine
1117 correct saved addresses of $s0 and $s1.
1118 (mips_find_saved_regs, mips16_heuristic_proc_desc): Use MIPS_REGSIZE
1119 instead of hardcoded 4.
1120 (mips16_skip_prologue): Handle extended instructions correctly.
1122 Mon Mar 3 12:29:20 1997 Doug Evans <dje@canuck.cygnus.com>
1124 * defs.h (LONGEST): Move #ifndef LONGEST to outside.
1125 Try BFD_HOST_64_BIT if ! CC_HAS_LONG_LONG.
1127 Thu Feb 27 18:54:11 1997 Mark Alexander <marka@cygnus.com>
1129 * mips-tdep.c (IS_MIPS16_ADDR, MAKE_MIPS16_ADDR, UNMAKE_MIPS16_ADDR):
1130 New macros for testing, setting, and clearing bit 0 of addresses.
1131 Change numerous bits of code where bit 0 was being manipulated
1132 to use these macros.
1134 Thu Feb 27 14:12:41 1997 Mark Alexander <marka@cygnus.com>
1136 * remote-mips.c: Put back the form feeds.
1138 Thu Feb 27 12:04:24 1997 Mark Alexander <marka@cygnus.com>
1140 * remote-mips.c: Remove form feeds (^L) from source.
1141 (mips_initialize): LSI PMON doesn't support 'set regsize' command.
1142 (pmon_wait): Don't need to exit and re-enter debug mode on LSI
1143 PMON after a continue; it causes target program misbehavior.
1144 (mips_fetch_register): Don't fetch unsupported registers; this
1145 cuts down on wasted serial traffic.
1147 Thu Feb 27 09:38:16 1997 Stu Grossman (grossman@critters.cygnus.com)
1149 * configure.in configure (HPUX/OSF thread support): Enable this
1150 only when running GCC, since HP's thread header files use ANSI C
1151 which is not supported by their default compiler.
1153 * configure.host (i[3456]86-*-windows): Disable long long
1154 support for WinGDB. Add mswin to configdirs.
1155 * configure.in configure: Move calls to configure.host and
1156 configure.tgt to the top of configure.in to allow them to set
1157 config variables before they are referenced.
1159 Tue Feb 25 20:21:52 1997 Stan Shebs <shebs@andros.cygnus.com>
1161 * configure.tgt (mips*-*-lnews*): New target.
1163 Mon Feb 24 16:35:00 1997 Jeffrey A Law (law@cygnus.com)
1165 * mn10200-tdep.c (mn10200_analyze_prologue): Don't fix fi->frame
1166 if we're not the innermost frame. Fix minor typos.
1168 Sat Feb 22 03:39:50 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1170 * stabsread.c (read_type): Fix handling of template names
1171 with template parameters containing `::'.
1173 * valops.c (search_struct_field, search_struct_method):
1174 Pass correct valaddr parameter to baseclass_offset.
1175 Prevent gdb crashes by making sure that the virtual base pointer
1176 from an user object still points to accessible memory.
1178 Tue Feb 18 13:36:34 1997 Mark Alexander <marka@cygnus.com>
1180 * maint.c: Eliminate -Wall warnings by including some header files.
1182 Tue Feb 18 13:06:30 1997 Mark Alexander <marka@cygnus.com>
1184 * remote-sim.c (init_callbacks): Undo previous change.
1186 Tue Feb 18 11:13:00 1997 Dawn Perchik <dawn@cygnus.com>
1188 * maint.c: Fix dereference of pointer.
1189 * remote-sim.c: Fix reference of structure member "last_error".
1190 * debugify.c: Include config.h to get ANSI definitions.
1192 Sat Feb 15 17:43:46 1997 Stu Grossman (grossman@critters.cygnus.com)
1194 * remote-vx.c (vx_attach): Remove code added by kung. It made no
1197 Fri Feb 14 13:00:07 1997 Ian Lance Taylor <ian@cygnus.com>
1199 * main.c (print_gdb_help): Make static to match declaration.
1201 Thu Feb 13 18:18:18 1997 Dawn Perchik <dawn@cygnus.com>
1203 * remote-e7000.c, ser-e7kpc.c, serial.c: Remove // comments.
1205 Wed Feb 12 15:58:00 1997 Dawn Perchik <dawn@cygnus.com>
1207 * debugify.c, debugify.h: Make safe for non-ansi compilers.
1209 Wed Feb 12 15:30:00 1997 Dawn Perchik <dawn@cygnus.com>
1211 * defs.h: Fix prototypes for new cleanup functions.
1213 Wed Feb 12 15:08:47 1997 Dawn Perchik <dawn@cygnus.com>
1215 * debugify.c, debugify.h: Fix for general gnu use. Remove C++
1216 comment, add PARAMS, add license info and fix indentation.
1218 Wed Feb 12 14:42:47 1997 Dawn Perchik <dawn@cygnus.com>
1220 * debugify.c, debugify.h: New files. Provide common macros
1221 for writing debug info to a log file or stdio.
1223 Wed Feb 12 02:44:39 1997 Dawn Perchik <dawn@cygnus.com>
1225 * c-valprint.c (c_val_print): Fix printing for arrays defined
1228 Tue Feb 11 22:24:39 1997 Dawn Perchik <dawn@cygnus.com>
1230 * defs.h: Fix cntl-C to read from the Windows message queue.
1231 Add prototypes for make_final_cleanup (and the other cleanup
1233 * remote-e7000.c: Fix sync code to timeout if unable to sync.
1234 Change sync code to report status while trying to sync-up
1235 with hardware. Add debugging output and document.
1236 * ser-e7kpc.c: Swap order of len & offset to match implementation.
1237 Add debugging output and document.
1238 * serial.c: Add debugging output.
1239 * top.c: Add call to do_final_cleanups.
1240 Remove conditionals preventing Win32 from getting SIGQUIT.
1241 * utils.c: (*_cleanup): Modify cleanup routines to accept a cleanup
1242 chain as a parameter. Extract this generic code from the cleanup
1243 routines into separate funtions (*_my_cleanup). Keep old
1244 functionality by passing "cleanup_chain" to the new funtions.
1245 Define the cleanup chain "final_cleanup_chain" to be a cleanup
1246 chain which will be executed only when gdb exits. Add functions
1247 (*_final_cleanup) to match the original (*_cleanup) functions.
1248 (pollquit, quit, notice_quit): Fix to read cntl-C from the
1249 Windows message queue.
1251 Tue Feb 11 15:36:31 1997 Doug Evans <dje@canuck.cygnus.com>
1253 * m32r-rom.c: #include <sys/types.h>.
1254 #ifdef out new load support if wingdb.
1255 * m32r/tm-m32r.h (TARGET_M32R): Define, for wingdb.
1257 Tue Feb 11 12:28:09 1997 Jeffrey A Law (law@cygnus.com)
1260 * config/mn10200/tm-mn10200.h (STORE_STRUCT_RETURN): Fix.
1261 * mn10200-tdep.c (mn10200_store_struct_return): New function.
1263 * config/mn10200/tm-mn10200.h (EXTRACT_RETURN_VALUE): Fix case when
1264 extracting a return value from a register pair.
1266 * mn10200-tdep.c (mn10200_push_arguments): Stack only needs to
1267 be two byte aligned. Round argument sizes up to two byte boundary.
1268 Write out args in two byte hunks.
1269 (mn10200_push_return_address): Implement.
1270 * config/mn10200/tm-mn10200.h (EXTRACT_RETURN_VALUE): Abort for
1271 structures > 8 bytes (temporary).
1272 (STORE_RETURN_VALUE): Likewise.
1273 (CALL_DUMMY): No longer undefine.
1274 (USE_STRUCT_CONVENTION): Use for args > 8 bytes.
1275 (REG_STRUCT_HAS_ADDR): Define.
1277 start-sanitize-r5900
1278 Fri Feb 07 09:04:37 1997 Gavin Koch <gavin@cygnus.com>
1280 * configure.tgt: added r5900.
1283 Mon Feb 10 18:35:55 1997 Mark Alexander <marka@cygnus.com>
1285 * mips-tdep.c (non_heuristic_proc_desc): New function.
1286 (find_proc_desc): Move non-heuristic proc search code into separate
1288 (gdb_print_insn_mips): Use non-heuristic method to find procedure
1289 descriptor, to avoid prologue examination when disassembling.
1290 * remote-mips.c: Add support for new "lsi" target (LSI MiniRISC
1291 aka MicroMeteor board).
1292 (mips_exit_debug): Prevent protocol reinitialization if an error
1293 occurs while exiting debug mode.
1295 Mon Feb 10 16:11:57 1997 Jeffrey A Law (law@cygnus.com)
1297 * mn10200-tdep.c: Remove lots of debugging printfs, update/improve
1298 comments, formatting, etc. Plus other minor fixes for problems
1299 I found during my first pass over the mn10200 port.
1300 (mn10200_analyze_prologue): New function.
1301 (mn10200_frame_chain, mn10200_init_extra_frame_info): Use it.
1302 * config/mn10200/tm-mn10200.h: Lots of updates/improvements to
1303 comments, formatting, etc. Minor fixes for problems I found during
1304 my first pass over the mn10200 port.
1305 (TARGET_*_BIT): Define appropriately for ints, long longs, doubles and
1307 (REGISTER_VIRTUAL_TYPE): Define as a long.
1308 (EXTRACT_RETURN_VALUE): Rework to deal with long ints living
1310 (STORE_RETURN_VALUE): Similarly.
1312 * blockframe.c (generic_get_saved_regs): Remove unused variable
1314 * breakpoint.c (frame_in_dummy): Move struct breakpoint *b decl
1315 inside #ifdef CALL_DUMMY.
1316 (watch_command_1): Initialize target_resources_ok.
1317 * command.c (do_setshow_command): Provide dummy initialization
1319 * valops.c (find_function_addr): Move function & prototype inside
1321 (value_arg_coerce): Similarly.
1322 (value_of_variable): Provide dummy initialization of "frame".
1324 start-sanitize-gdbtk
1325 Mon Feb 10 13:50:53 1997 Stu Grossman (grossman@critters.cygnus.com)
1327 * gdbtk.c (call_wrapper): Clear running_now if an error occurs.
1330 Mon Feb 10 07:54:26 1997 Fred Fish <fnf@cygnus.com>
1332 * xcoffread.c (RECORD_MINIMAL_SYMBOL): Add NULL asection* parameter
1333 to prim_record_minimal_symbol_and_info call that was missed in Jan 3
1335 (scan_xcoff_symtab): Ditto.
1337 Sun Feb 09 09:23:26 1997 Mark Alexander <marka@cygnus.com>
1339 * remote-mips.c (common_breakpoint): Prevent 64-bit addresses
1340 from being sent to 32-bit targets by masking off upper bits.
1341 * mips-tdep.c (heuristic_proc_start): Mask off upper 32 bits
1342 of PC on 32-bit targets.
1343 (mips16_heuristic_proc_desc): Recognize 'addiu s1,sp,n' as a
1344 frame setup instruction.
1345 (mips32_heuristic_proc_desc): Fix warning found by gcc -Wall.
1346 (mips16_skip_prologue): Recognize 'addiu s1,sp,n' as a valid
1347 prologue instruction. Fix warnings and bugs found by gcc -Wall.
1348 * buildsym.c (finish_block): Improve handling of overlapping blocks;
1349 fixes problem on MIPS16 printing function arguments.
1351 Sat Feb 8 01:14:43 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1353 * dwarf2read.c (dwarf2_linkage_name): New function to get
1354 the linkage name of a die from DW_AT_MIPS_linkage_name or
1356 (read_func_scope, dwarf2_add_field, dwarf2_add_member_fn,
1357 new_symbol): Use it instead of accessing DW_AT_name.
1358 (read_partial_die): Use DW_AT_MIPS_linkage name as name of the
1359 partial die if present.
1360 (dwarf2_add_member_fn): Make a copy of physname on the type obstack.
1362 Fri Feb 7 10:06:22 1997 Jeffrey A Law (law@cygnus.com)
1364 * blockframe.c (generic_frame_chain_valid): If the new frame
1365 is not INNER_THAN the old frame, then it's not valid.
1367 Tue Feb 04 09:04:37 1997 Mark Alexander <marka@cygnus.com>
1369 * mips-tdep.c (mips16_get_imm): Fix calculation of extended immediate.
1370 (mips16_heuristic_proc_desc): Recognize jal(x) instruction.
1372 Mon Feb 03 17:57:58 1997 Mark Alexander <marka@cygnus.com>
1374 * mips-tdep.c (mips16_decode_reg_save): Distinguish between
1375 sd and sw instructions correctly.
1376 (heuristic_proc_start): Add support for MIPS16.
1377 (mips16_get_imm, mips16_heuristic_proc_desc,
1378 mips32_heuristic_proc_desc): New helper functions for
1379 heuristic_proc_desc.
1380 (heuristic_proc_desc): Rewrite and reorganize to support MIPS16.
1381 (mips_push_arguments): Don't align small arguments in EABI.
1382 (mips32_skip_prologue): Attempt to shrink code size a little.
1384 Mon Feb 3 11:06:05 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
1386 * m32r-stub.c: New -- remote protocol support for M32R cpu.
1387 * m32r-rom.c: Several experiments with improved download time.
1389 Fri Jan 31 08:26:39 1997 Mark Alexander <marka@cygnus.com>
1391 * mips-tdep.c (MIPS16_INSTLEN): Define.
1392 (mips_find_saved_regs): Replace hardcoded 2's with MIPS16_INSTLEN.
1393 (heuristic_proc_start): Recognize 'entry' pseudo-op as a start
1394 of function on MIPS16.
1395 (mips32_skip_prologue, mips16_skip_prologue): New helper functions
1396 for mips_skip_prologue.
1397 (mips_skip_prologue): Recognize both 16- and 32-bit prologues.
1399 Wed Jan 29 12:45:54 1997 Michael Meissner <meissner@tiktok.cygnus.com>
1401 * config/powerpc/ppc{,le}-sim.mt (SIM): Remove the library
1402 ../sim/common/libcommon.a.
1404 Tue Jan 28 15:54:13 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
1406 * blockframe.c: fix a null pointer ref in generic_get_saved_register
1408 Tue Jan 28 15:39:50 1997 Geoffrey Noer <noer@cygnus.com>
1410 * mn10200-tdep.c (mn10200_frame_chain): Get basic backtracing
1413 Mon Jan 27 14:31:52 1997 Mark Alexander <marka@cygnus.com>
1415 First set of changes for mips16:
1416 * config/mips/tm-mips.h (MIPS16_BIG_BREAKPOINT,
1417 MIPS16_LITTLE_BREAKPOINT, BREAKPOINT_FROM_PC): Define.
1418 (ABOUT_TO_RETURN): Call new function mips_about_to_return.
1419 (mips_breakpoint_from_pc, mips_about_to_return): Declare.
1420 * mem-break.c (memory_breakpoint_from_pc): New function.
1421 (memory_insert_breakpoint, memory_remove_breakpoint): Use
1422 memory_breakpoint_from_pc to determine breakpoint contents and size.
1423 * target.h (memory_breakpoint_from_pc): Declare.
1424 * monitor.c (monitor_insert_breakpoint): Use memory_breakpoint_from_pc
1425 to determine size of breakpoint instruction.
1426 * mips-tdep.c (mips32_decode_reg_save, mips16_decode_reg_save):
1427 New helper functions for mips_find_saved_regs.
1428 (mips_find_saved_regs): Recognize mips16 prologues.
1429 (mips_addr_bits_remove): Strip off upper 32 bits of address
1430 when target CPU is 32 bits but CORE_ADDR is 64 bits.
1431 (mips_step_skips_delay): No branch delay slot on mips16.
1432 (gdb_print_insn_mips): Disassemble mips16 code.
1433 (mips_breakpoint_from_pc, mips_about_to_return): New functions.
1435 Mon Jan 27 10:34:03 1997 Jeffrey A Law (law@cygnus.com)
1437 * tm-mn10200.h (NUM_REGS): Decrease to 12.
1438 (REGISTER_NAMES): Elimination registers not found on the mn10200.
1439 (PC_REGNUM, MDR_REGNUM, PSW_REGNUM): Corresponding changes.
1440 (LIR_REGNUM, LAR_REGNUM): Delete. They don't exist on the mn10200.
1442 Sat Jan 25 00:07:59 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1444 * dwarf2read.c: Replace integral tag, name and form fields in
1445 internal structure definitions with the corresponding enumeration
1446 types from dwarf2.h. Add default cases to switches on enumerations
1448 Make quoting of string arguments in complaint messages consistent.
1449 Check for NULL returns from DW_STRING.
1450 (struct partial_die_info): Add sibling and has_type fields, remove
1452 (DW_*): Move access macro definitions near the definition of the
1453 attribute structure.
1454 (struct field_info): New structure to pass information about fields
1455 and member functions between die processing routines.
1456 (dwarf2_build_psymtabs_hard): Set cu_header_offset.
1457 (scan_partial_symbols): Do not enter DW_TAG_subprogram dies into
1458 the partial symbol table if the DW_AT_*_pc attributes are missing.
1459 Add file scope base type definitions to the partial symbol table.
1460 Skip over child dies if the die has a sibling attribute.
1461 (add_partial_symbol): Enter global variables with type attributes
1462 and without location descriptors into the partial symbol table.
1463 Store value of DW_TAG_variable dies in the partial symbol table.
1464 Do not enter global variables into the minimal symbol table.
1465 Add base type definitions to the partial symbol table.
1466 (psymtab_to_symtab_1): Use dwarf2_get_pc_bounds to determine highpc.
1467 (process_die): Move check for DW_AT_low_pc to read_func_scope.
1468 Add a typedef symbol for base type definitions to the symbol table.
1469 Ignore DW_TAG_inlined_subroutine tags for now.
1470 (read_file_scope): Use dwarf2_get_pc_bounds to determine pc bounds.
1471 (read_func_scope, read_lexical_block_scope): Use dwarf2_get_pc_bounds
1472 to determine pc bounds, ignore dies with invalid bounds.
1473 (dwarf2_get_pc_bounds): New routine to extract and validate the
1474 DW_AT_*_pc attributes of a die.
1475 (dwarf2_add_field, dwarf2_attach_fields_to_type, skip_member_fn_name,
1476 dwarf2_add_member_fn, dwarf2_attach_fn_fields_to_type):
1477 New functions to handle fields and member functions.
1478 (read_structure_scope): Rewritten to use them.
1479 (read_array_type): Renamed from dwarf_read_array_type.
1480 Default upper array bound to describe an array with unspecified
1482 Create array types in backwards order, as dwarf2 puts out the array
1483 dimensions from left to right.
1484 (read_subroutine_type): Handle DW_TAG_unspecified_parameters,
1485 DW_AT_artificial and DW_AT_prototyped.
1486 (read_base_type): Make an unsigned type for DW_ATE_boolean.
1487 Pass objfile to dwarf_base_type.
1488 (read_partial_die): Use read_attribute to read in the attributes.
1489 Handle DW_AT_sibling and DW_AT_type.
1490 Follow references when determining DW_AT_name and DW_AT_external
1491 attributes of the die.
1492 Validate DW_AT_*_pc attributes.
1493 (read_full_die): Use read_attribute to read in the attributes.
1494 (read_attribute): New function to read an attribute described
1495 by an abbreviated attribute.
1496 (new_symbol): Relocate symbol value for DW_TAG_label with baseaddr.
1497 Do not set SYMBOL_VALUE_ADDRESS for DW_TAG_subprogram,
1498 SYMBOL_BLOCK_VALUE for the symbol will be set later by finish_block.
1499 Change symbol class for global variables with a zero valued location
1500 descriptor to LOC_UNRESOLVED.
1501 Handle DW_AT_const_value attributes for DW_TAG_variable,
1502 DW_TAG_formal_parameter and DW_TAG_enumerator.
1503 Build a typedef symbol for DW_TAG_base_type.
1504 (dwarf2_const_value): New routine to copy a constant value from an
1505 attribute to a symbol.
1506 (dwarf_base_type): Use passed in objfile, not current_objfile
1507 when calling dwarf2_fundamental_type.
1508 (dump_die): Use DW_* accessor macros to access values of attributes.
1509 (decode_locdesc): Handle DW_OP_plus_uconst.
1511 Wed Jan 22 01:31:16 1997 Geoffrey Noer <noer@cygnus.com>
1513 * mn10200-tdep.c: New file.
1514 * config/mn10200/tm-mn10200.h: New, REGISTER_SIZE is 24 bits not 32,
1515 SP_REGNUM and FP_REGNUM are different, also no lar or lir.
1516 * config/mn10200/mn10200.mt: New file.
1517 * configure.tgt: add mn10200 entry.
1519 Tue Jan 21 18:32:23 1997 Stu Grossman (grossman@lisa.cygnus.com)
1521 * configure.in configure: Check if host has libdl if doing
1524 Tue Jan 21 17:03:26 1997 Geoffrey Noer <noer@cygnus.com>
1526 * mn10300-tdep.c: Wrote/fixed implementations of
1527 mn10300_frame_chain, mn10300_init_extra_frame_info,
1528 mn10300_frame_saved_pc
1529 * config/mn10300/tm-mn10300.h: Redefine INIT_EXTRA_FRAME_INFO
1530 and INIT_FRAME_PC macros.
1532 Tue Jan 21 17:01:20 1997 Stu Grossman (grossman@lisa.cygnus.com)
1534 * configure.in configure: Check if host has libm. Make sure we
1535 are using gcc when using the -export-dynamic option. Fixes a
1536 problem with building under Solaris/SunPro cc.
1538 Mon Jan 20 13:52:13 1997 Mark Alexander <marka@cygnus.com>
1540 * config/mips/{embed,embed64,embedl,embedl64}.mt:
1541 Link in simulator on MIPS embedded targets.
1543 Sat Jan 18 02:31:29 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1545 * blockframe.c (frameless_look_for_prologue): Mark frames
1546 with a zero PC as frameless to improve backtraces from core dumps
1547 caused by dereferencing a NULL function pointer.
1549 Thu Jan 16 14:10:41 1997 Geoffrey Noer <noer@cygnus.com>
1551 * config/mn10300/tm-mn10300.h: fix BREAKPOINT definition.
1553 Tue Jan 14 16:01:06 1997 Geoffrey Noer <noer@cygnus.com>
1555 * mn10300-tdep.c: made a lot more generic, ripping out code
1556 from copied target (no more mn10300_scan_prologue,
1557 init_extra_frame_info, and mn10300_fix_call_dummy calls)
1558 * config/mn10300/tm-mn10300.h: undefine INIT_EXTRA_FRAME_INFO
1559 and INIT_FRAME_PC macros
1561 Thu Jan 9 11:44:40 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
1563 * sparc-tdep.c (sparc_frame_find_saved_regs): Don't use
1564 FP_REGISTER_BYTES to compute offsets into the saved frame,
1565 since it fails for SPARC targets configured without any
1566 FP regs. Instead, use DUMMY_STACK_REG_BUF_SIZE.
1568 Mon Jan 6 11:15:14 1997 Stu Grossman (grossman@critters.cygnus.com)
1570 * symtab.c (fixup_symbol_section): Handle NULL symbols without
1573 Fri Jan 3 12:08:16 1997 Stu Grossman (grossman@critters.cygnus.com)
1575 * Makefile.in configure configure.in: Remove ENABLE_CLIBS,
1576 ENABLE_OBS, and THREAD_DB_OBS. These are consolidated into LIBS
1578 * configure configure.in: Clean up test cases around thread support.
1580 * configure.tgt (v850-*-*): Include v850ice.o and v850.lib if
1583 * c-valprint.c ch-valprint.c cp-valprint.c eval.c expprint.c
1584 printcmd.c valops.c value.h values.c: Add bfd_section arg to
1585 value_at and value_at_lazy.
1586 * coffread.c dbxread.c elfread.c mdebugread.c minsyms.c symtab.h:
1587 Add bfd_section arg to prim_record_minimal_symbol_and_info.
1588 * corefile.c gdbcore.h printcmd.c valops.c: Use read_memory_section
1589 instead of read_memory. It takes a bfd_section arg.
1590 * coffread.c dbxread.c elfread.c gdb-stabs.h objfiles.h: Remove
1591 unnecessary cast for assignment of struct dbx_symfile_info.
1592 Struct objfile now uses a real pointer instead of PTR for this
1594 * dbxread.c (dbx_symfile_init): Stash bfd section pointers for
1595 text, data and bss into dbx_symfile_info.
1596 * exec.c (xfer_memory): Handle transfers for user-specified
1598 * findvar.c (read_var_value locate_var_value): Copy bfd section
1599 from the symbol to the value.
1600 * gdb-stabs.h: Add section pointers for text, data and bss
1602 * maint.c (translate address command): Add test code for overlay
1603 address translation.
1604 * printcmd.c (do_examine do_one_display): Now takes a bfd section
1606 * (print_formatted x_command): Record current section along with
1607 current address for repeated commands.
1608 * sparc-nat.c (fetch_inferior_registers): Change
1609 target_xfer_memory to target_{read write}_memory to allow changes
1610 to target_xfer_memory interface for section info.
1611 * symmisc.c (dump_msymbols print_symbol): Print section
1612 assocaited with symbol.
1613 * symtab.c (fixup_symbol_section): New routine to
1614 add section info to symbols returned by lookup_symbol.
1615 * symtab.h (struct general_symbol_info): Add bfd section to
1617 * target.c target.h (target_xfer_memory): Add bfd section to
1619 * (target_read_memory_section): New routine to read data from a
1621 * (target_memory_bfd_section): New global variable to pass bfd
1622 section in to targets.
1623 * valarith.c (value_add value_addr value_array): Preserve bfd
1624 section when computing new value.
1625 * value.h (struct value): Add bfd section to values.
1626 * values.c (allocate_value value_copy): Initialize/preserve bfd
1628 * (unpack_double): Clean up _MSC_VER conditionals to remove
1631 * v850ice.c: New module to support communication with NEC's
1633 * config/v850/tm-v850.h (REGISTER_NAMES): Replace sp, gp, fp, and
1634 ep names with rxx names. sp and fp are renamed via a different
1638 Fri Jan 3 14:20:05 1997 Geoffrey Noer <noer@cygnus.com>
1640 * mn10300-tdep.c (mn10300_push_arguments): rewrote,
1641 also removed code elsewhere that made use of RP_REGNUM.
1642 * config/mn10300/tm-mn10300.h: ripped out RP_REGNUM, V0_REGNUM,
1643 ARG0_REGNUM, ARGLAST_REGNUM (all not appropriate for mn10300
1644 arch.), redefined SAVED_PC_AFTER_CALL, EXTRACT_RETURN_VALUE,
1645 EXTRACT_STRUCT_VALUE_ADDRESS, STORE_RETURN_VALUE.
1647 For older changes see ChangeLog-96
1653 version-control: never