1 2015-05-20 Joel Brobecker <brobecker@adacore.com>
3 * infrun.c (handle_inferior_event_1): Renames handle_inferior_event.
4 (handle_inferior_event): New function.
6 2015-05-20 Joel Brobecker <brobecker@adacore.com>
8 * ada-lang.c (to_fixed_array_type): Rename local variable
9 typename into type_name.
11 2015-05-19 Jan Kratochvil <jan.kratochvil@redhat.com>
13 Fix ASAN crash for gdb.compile/compile.exp.
14 * infcall.c (call_function_by_hand_dummy): Use xstrdup for NAME.
16 2015-05-19 Jan Kratochvil <jan.kratochvil@redhat.com>
18 * compile/compile-c-symbols.c (convert_symbol_sym, gcc_convert_symbol)
19 (gcc_symbol_address): Change gdb_stdout to gdb_stdlog.
20 * compile/compile-object-load.c (setup_sections, compile_object_load):
22 * compile/compile.c (compile_to_object): Likewise.
24 2015-05-16 Doug Evans <xdje42@gmail.com>
26 * NEWS: Mention support for unbuffered Guile memory ports.
27 * scm-ports.c (ioscm_memory_port): Update comments on end, size.
28 (ioscm_lseek_address): Improve overflow calculation.
29 (gdbscm_memory_port_fill_input): Add assert.
30 (gdbscm_memory_port_write): Handle unbuffered ports.
31 Handle large writes identical to Guile's fport_write.
32 (gdbscm_memory_port_seek): Fix seeking past end check.
33 (gdbscm_memory_port_close): Handle closing unbuffered port.
34 (ioscm_parse_mode_bits): Recognize "0" for unbuffered ports.
35 (ioscm_init_memory_port): Handle unbuffered ports.
36 (ioscm_reinit_memory_port): Ditto.
37 (ioscm_init_memory_port): Update size calculation.
38 (gdbscm_open_memory): Support zero sized ports.
40 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
42 * compile/compile-object-load.c (get_out_value_type): Fix uninitialized
43 variable compiler warnings.
45 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
47 * compile/compile-object-load.c (get_out_value_type): Fix returned type.
49 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
50 Phil Muldoon <pmuldoon@redhat.com>
52 * NEWS (Changes since GDB 7.9): Add compile print.
53 * compile/compile-c-support.c (add_code_header, add_code_footer)
54 (c_compute_program): Add COMPILE_I_PRINT_ADDRESS_SCOPE and
55 COMPILE_I_PRINT_VALUE_SCOPE.
56 * compile/compile-internal.h (COMPILE_I_PRINT_OUT_ARG_TYPE)
57 (COMPILE_I_PRINT_OUT_ARG, COMPILE_I_EXPR_VAL, COMPILE_I_EXPR_PTR_TYPE):
59 * compile/compile-object-load.c: Include block.h.
60 (get_out_value_type): New function.
61 (compile_object_load): Handle COMPILE_I_PRINT_ADDRESS_SCOPE and
62 COMPILE_I_PRINT_VALUE_SCOPE. Set compile_module's OUT_VALUE_ADDR and
64 * compile/compile-object-load.h (struct compile_module): Add fields
65 out_value_addr and out_value_type.
66 * compile/compile-object-run.c: Include valprint.h and compile.h.
67 (struct do_module_cleanup): Add fields out_value_addr and
69 (do_module_cleanup): Handle COMPILE_I_PRINT_ADDRESS_SCOPE and
70 COMPILE_I_PRINT_VALUE_SCOPE.
71 (compile_object_run): Propagate out_value_addr and out_value_type.
73 * compile/compile.c: Include valprint.h.
74 (compile_print_value, compile_print_command): New functions.
75 (eval_compile_command): Handle failed COMPILE_I_PRINT_ADDRESS_SCOPE.
76 (_initialize_compile): Update compile code help text. Install
77 compile_print_command.
78 * compile/compile.h (compile_print_value): New prototype.
79 * defs.h (enum compile_i_scope_types): Add
80 COMPILE_I_PRINT_ADDRESS_SCOPE and COMPILE_I_PRINT_VALUE_SCOPE.
82 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
84 * compile/compile-object-load.c (get_regs_type): Add parameter func_sym.
85 Rely on its parameter count.
86 (compile_object_load): Replace lookup_minimal_symbol_text by
87 lookup_global_symbol_from_objfile. Verify FUNC_SYM. Set it in the
89 * compile/compile-object-load.h (struct compile_module): Replace
90 func_addr by func_sym.
91 * compile/compile-object-run.c: Include block.h.
92 (compile_object_run): Reset module variable after it is freed. Use
93 FUNC_SYM instead of FUNC_ADDR. Rely on it.
95 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
97 * compile/compile-c-support.c (print_one_macro): Use #ifndef.
98 (generate_register_struct): Use __gdb_uintptr for TYPE_CODE_PTR.
99 (c_compute_program): Call generate_register_struct after typedefs.
100 * compile/compile-loc2c.c (push, pushf_register_address)
101 (pushf_register): Cast to GCC_UINTPTR.
102 (do_compile_dwarf_expr_to_c): Use unused attribute. Add space after
103 type. Use GCC_UINTPTR instead of void *. Remove excessive cast.
104 (compile_dwarf_expr_to_c): Use GCC_UINTPTR instead of void *.
105 * compile/compile.c (_initialize_compile): Enable warnings for
108 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
110 * cli/cli-script.c (execute_control_command): Update
111 eval_compile_command caller.
112 * compile/compile-object-load.c (compile_object_load): Add parameters
113 scope and scope_data. Set them.
114 * compile/compile-object-load.h (struct compile_module): Add fields
115 scope and scope_data.
116 (compile_object_load): Add parameters scope and scope_data.
117 * compile/compile-object-run.c (struct do_module_cleanup): Add fields
118 scope and scope_data.
119 (compile_object_run): Propagate the fields scope and scope_data.
120 * compile/compile.c (compile_file_command, compile_code_command):
121 Update eval_compile_command callers.
122 (eval_compile_command): Add parameter scope_data. Pass it plus scope.
123 * compile/compile.h (eval_compile_command): Add parameter scope_data.
124 * defs.h (struct command_line): Add field scope_data.
126 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
128 * printcmd.c (struct format_data): Move it to valprint.h.
129 (print_command_parse_format, print_value): New functions from ...
130 (print_command_1): ... here. Call them.
131 * valprint.h (struct format_data): Move it here from printcmd.c.
132 (print_command_parse_format, print_value): New declarations.
134 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
136 * compile/compile-object-load.c (compile_object_load): Add
137 COMPILE_DEBUG message.
139 2015-05-15 Jerome Guitton <guitton@adacore.com>
141 * ada-lang.c (ada_value_ptr_subscript): Use enum position of
142 index to get element instead of enum value.
143 (ada_value_slice_from_ptr, ada_value_slice): Use enum position
144 of index to compute length, but enum values to compute bounds.
145 (ada_array_length): Use enum position of index instead of enum value.
146 (pos_atr): Move position computation to...
147 (ada_evaluate_subexp): Use enum values to compute bounds.
148 * gdbtypes.c (discrete_position): ...this new function.
149 * gdbtypes.h (discrete_position): New function declaration.
150 * valprint.c (val_print_array_elements): Call discrete_position
151 to handle array indexed by non-contiguous enumeration types.
153 2015-05-15 Jerome Guitton <guitton@adacore.com>
155 * ada-lang.c (find_parallel_type_by_descriptive_type):
156 Go through typedefs during lookup.
157 (to_fixed_array_type): Add support for non-bit packed arrays
158 as variable-length fields.
160 2015-05-15 Pedro Alves <palves@redhat.com>
161 Simon Marchi <simon.marchi@ericsson.com>
163 * event-loop.c (gdb_notifier) <next_file_handler,
164 next_poll_fds_index>: New fields.
165 (get_next_file_handler_to_handle_and_advance): New function.
166 (delete_file_handler): If deleting the next file handler to
167 handle, advance to the next file handler.
168 (gdb_wait_for_event): Bail early if no event fired. Poll file
169 handlers in round-robin fashion.
171 2015-05-15 Pedro Alves <palves@redhat.com>
173 * linux-tdep.c (linux_find_memory_regions_full): Rename local
176 2015-05-15 Pedro Alves <palves@redhat.com>
178 * nat/linux-nat.h: Include "target/waitstatus.h".
180 2015-05-15 Yuanhui Zhang <asmwarrior@gmail.com>
182 * python/py-unwind.c (struct reg_info): Move out of ...
183 (struct cached_frame_info): ... this scope.
184 (pending_frame_object_type, unwind_info_object_type): Make extern.
186 2015-05-15 Joel Brobecker <brobecker@adacore.com>
188 * ada-lang.c (ada_value_primitive_packed_val): Make sure
189 accumSize is never negative.
191 2015-05-14 Patrick Palka <patrick@parcs.ath.cx>
193 * tui/tui-command.c: Remove include of <ctype.h>.
194 (tui_dispatch_ctrl_char): Remove workaround for xterm terminals.
196 2015-05-13 Martin Galvan <martin.galvan@tallertechnologies.com>
198 * dwarf2read.c (die_needs_namespace): Return 1 for
199 DW_TAG_inlined_subroutine.
201 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
203 * regcache.c (regcache_cpy_no_passthrough): New declaration.
204 (regcache_cpy_no_passthrough): Make it static, add function comment.
205 * regcache.h (regcache_dup, regcache_cpy): Reduce/update their comment.
206 (regcache_cpy_no_passthrough): Remove declaration.
208 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
210 * gdbthread.h (struct thread_control_state): Update comment for
212 * infcall.c (run_inferior_call): Update comment about
214 * infcmd.c (get_return_value): Update comment about stop_registers.
215 (finish_forward): Update comment about proceed_to_finish.
216 * infrun.c (stop_registers): Remove.
217 (clear_proceed_status, normal_stop): Remove stop_registers handling.
218 * infrun.h (stop_registers): Remove.
220 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
222 * infcall.c (struct dummy_frame_context_saver)
223 (dummy_frame_context_saver_data_free, dummy_frame_context_saver_dtor)
224 (dummy_frame_context_saver_drop, dummy_frame_context_saver_cleanup)
225 (dummy_frame_context_saver_get_regs, dummy_frame_context_saver_setup):
227 (call_function_by_hand_dummy): Move discard_cleanups of
228 inf_status_cleanup before dummy_frame_push. Call
229 dummy_frame_context_saver_setup and prepare context_saver_cleanup.
230 Use dummy_frame_context_saver_get_regs instead of stop_registers.
231 * infcall.h (struct dummy_frame_context_saver)
232 (dummy_frame_context_saver_drop, dummy_frame_context_saver_cleanup)
233 (dummy_frame_context_saver_get_regs, dummy_frame_context_saver_setup):
235 * infcmd.c: Include infcall.h.
236 (get_return_value): Add parameter ctx_saver, use it instead of
238 (print_return_value): Add parameter ctx_saver, pass it.
239 (struct finish_command_continuation_args): Add field ctx_saver.
240 (finish_command_continuation): Update print_return_value caller.
241 (finish_command_continuation_free_arg): Free also ctx_saver.
242 (finish_forward): Call dummy_frame_context_saver_setup.
243 * inferior.h (struct dummy_frame_context_saver): New declaration.
244 (get_return_value): Add parameter ctx_saver.
245 * python/py-finishbreakpoint.c (bpfinishpy_pre_stop_hook): Update
246 get_return_value caller.
248 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
250 * dummy-frame.c (struct dummy_frame_dtor_list): New.
251 (struct dummy_frame): Replace dtor and dtor_data by dtor_list.
252 (remove_dummy_frame): Process dtor_list.
253 (pop_dummy_frame): Process dtor_list.
254 (register_dummy_frame_dtor): Maintain dtor_list.
255 (find_dummy_frame_dtor): Handle dtor_list.
256 * dummy-frame.h (register_dummy_frame_dtor, find_dummy_frame_dtor):
259 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
261 * compile/compile-object-run.c (do_module_cleanup): Add parameter
263 (compile_object_run): Update do_module_cleanup caller.
264 * dummy-frame.c: Include infcall.h.
265 (struct dummy_frame): Update dtor comment.
266 (remove_dummy_frame): Call dtor.
267 (pop_dummy_frame): Update dtor caller.
268 * dummy-frame.h (dummy_frame_dtor_ftype): Add parameter
271 2015-05-13 Joel Brobecker <brobecker@adacore.com>
275 2015-05-13 Joel Brobecker <brobecker@adacore.com>
277 * NEWS: Create "Changes in GDB 7.9.1" section. Move news about
278 Xmethods now being able to specify a result type to that new
281 2015-05-13 Patrick Palka <patrick@parcs.ath.cx>
283 * tui/tui-win.c (tui_async_resize_screen): Clear win_resized
284 first before resizing the window.
285 * tui/tui.c (tui_enable): Likewise.
287 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
289 * dummy-frame.c (struct dummy_frame): Use proper typedef for dtor.
290 * dummy-frame.h (dummy_frame_dtor_ftype): Add its comment.
291 * infcall.c (call_function_by_hand_dummy): Use proper typedef for
292 dummy_dtor parameter.
293 * infcall.h: Include dummy-frame.h.
294 (call_function_by_hand_dummy_dtor_ftype): Remove.
295 (call_function_by_hand_dummy): Use proper typedef for dummy_dtor
298 2015-05-13 Patrick Palka <patrick@parcs.ath.cx>
301 * top.c (history_size_setshow_var): Change type to signed.
302 Initialize to -2. Update documentation.
303 (set_readline_history_size): Define.
304 (set_history_size_command): Use it. Remove logic for handling
306 (init_history): Use set_readline_history_size(). Test for a
307 value of -2 instead of 0 when determining whether to set a
308 default history size.
309 (init_main): Decode the argument of the "size" command as a
312 2015-05-12 Doug Evans <dje@google.com>
314 * dwarf2read.c (struct file_entry): Tweak comments.
315 (get_debug_line_section): Tweak comments.
317 2015-05-12 Don Breazeal <donb@codesourcery.com>
319 * NEWS: Announce fork support in the RSP and support
320 for fork debugging in extended mode.
322 2015-05-12 Don Breazeal <donb@codesourcery.com>
324 * remote.c (remote_insert_fork_catchpoint): New function.
325 (remote_remove_fork_catchpoint): New function.
326 (remote_insert_vfork_catchpoint): New function.
327 (remote_remove_vfork_catchpoint): New function.
328 (pending_fork_parent_callback): New function.
329 (remove_new_fork_child): New function.
330 (remote_update_thread_list): Call remote_notif_get_pending_events
331 and remove_new_fork_child.
332 (extended_remote_kill): Kill fork child when killing the
333 parent before follow_fork completes.
334 (init_extended_remote_ops): Initialize target vector with
335 new fork catchpoint functions.
337 2015-05-12 Don Breazeal <donb@codesourcery.com>
339 * remote.c (remove_vfork_event_p): New function.
340 (remote_follow_fork): Add vfork event type to event checking.
341 (remote_parse_stop_reply): New stop reasons "vfork" and
342 "vforkdone" for RSP 'T' Stop Reply Packet.
344 2015-05-12 Don Breazeal <donb@codesourcery.com>
346 * linux-nat.c (linux_nat_ptrace_options): New function.
347 (linux_init_ptrace, wait_lwp, linux_nat_filter_event):
348 Call linux_nat_ptrace_options and use different argument to
349 linux_enable_event_reporting.
350 (_initialize_linux_nat): Delete call to
351 linux_ptrace_set_additional_flags.
352 * nat/linux-ptrace.c (current_ptrace_options): Rename to
353 supported_ptrace_options.
354 (additional_flags): Delete variable.
355 (linux_check_ptrace_features): Use supported_ptrace_options.
356 (linux_test_for_tracesysgood, linux_test_for_tracefork):
357 Likewise, and remove additional_flags check.
358 (linux_enable_event_reporting): Change 'attached' argument to
359 'options'. Use supported_ptrace_options.
360 (ptrace_supports_feature): Change comment. Use
361 supported_ptrace_options.
362 (linux_ptrace_set_additional_flags): Delete function.
363 * nat/linux-ptrace.h (linux_ptrace_set_additional_flags):
364 Delete function prototype.
365 * remote.c (remote_fork_event_p): New function.
366 (remote_detach_pid): New function.
367 (remote_detach_1): Call remote_detach_pid, don't mourn inferior
368 if doing detach-on-fork.
369 (remote_follow_fork): New function.
370 (remote_parse_stop_reply): Handle new "T" stop reason "fork".
371 (remote_pid_to_str): Print "process" strings for pid/0/0 ptids.
372 (init_extended_remote_ops): Initialize to_follow_fork.
374 2015-05-12 Don Breazeal <donb@codesourcery.com>
376 * nat/linux-ptrace.c (linux_check_ptrace_features): Change
377 from static to extern.
378 * nat/linux-ptrace.h (linux_check_ptrace_features): Declare.
379 * remote.c (anonymous enum): <PACKET_fork_event_feature,
380 * PACKET_vfork_event_feature>: New enumeration constants.
381 (remote_protocol_features): Add table entries for new packets.
382 (remote_query_supported): Add new feature queries to qSupported
385 2015-05-12 Gary Benson <gbenson@redhat.com>
387 * remote.c (remote_add_inferior): Call exec_file_locate_attach
388 for fake PIDs as well as real ones.
389 (remote_pid_to_exec_file): Send empty annex if PID is fake.
391 2015-05-09 Siva Chandra Reddy <sivachandra@google.com>
393 * NEWS (Python Scripting): Mention the new gdb.Value methods.
394 * python/py-value.c (valpy_reference_value): New function.
395 (valpy_const_value): Likewise.
396 (value_object_methods): Add new methods.
397 * value.c (make_cv_value): New function.
398 * value.h (make_cv_value): Declare.
400 2015-05-08 Yao Qi <yao@codesourcery.com>
401 Sandra Loosemore <sandra@codesourcery.com>
403 * dwarf2read.c (setup_type_unit_groups): Do NULL pointer check
404 to 'lh->include_dirs' before accessing to it.
405 (psymtab_include_file_name): Likewise.
406 (dwarf_decode_lines_1): Likewise.
407 (dwarf_decode_lines): Likewise.
408 (file_file_name): Likewise.
410 2015-05-08 Sandra Loosemore <sandra@codesourcery.com>
412 * nios2-linux-tdep.c (NIOS2_SIGRETURN_TRAMP_ADDR): Define.
413 (NIOS2_SIGRETURN_REGSAVE_OFFSET): Define.
414 (nios2_linux_rt_sigreturn_init): Adjust base address of
417 2015-05-08 Sandra Loosemore <sandra@codesourcery.com>
419 * nios2-tdep.c (nios2_breakpoint_from_pc): Revert to using
420 "trap 31" as the breakpoint instruction on all targets.
422 2015-05-08 Jan Kratochvil <jan.kratochvil@redhat.com>
424 * infcmd.c (print_return_value): Remove unused declaration.
426 2015-05-08 Joel Brobecker <brobecker@adacore.com>
428 * dwarf2read.c (attr_to_dynamic_prop)
429 <DW_AT_data_member_location>: Use read_type_die isntead of
432 2015-05-08 Joel Brobecker <brobecker@adacore.com>
434 * ada-lang.c (ada_convert_actual): Add handling of formals
435 passed inside an aligner type.
437 2015-05-08 Joel Brobecker <brobecker@adacore.com>
439 * copyright.py (NOT_FSF_LIST): Remove sim/erc32 entries.
441 2015-05-08 Siva Chandra Reddy <sivachandra@google.com>
444 * python/lib/gdb/command/xmethods.py (print_xm_info): Fix typo.
445 Print xmethod matcher status.
447 2015-05-08 Andreas Arnez <arnez@linux.vnet.ibm.com>
449 * s390-linux-nat.c (fill_gregset): Avoid relying on the PSWA
450 register in the regcache when treating the PSWM register, and vice
453 2015-05-07 Gary Benson <gbenson@redhat.com>
455 * linux-thread-db.c (struct thread_db_info)
456 <td_ta_map_id2thr_p>: Remove field.
457 (try_thread_db_load_1): Remove initialization for the above.
459 2015-05-07 Gary Benson <gbenson@redhat.com>
461 * linux-thread-db.c (struct thread_db_info)
462 <td_thr_validate_p>: Remove field.
463 (try_thread_db_load_1): Remove initialization for the above.
465 2015-05-06 Jan Kratochvil <jan.kratochvil@redhat.com>
467 * compile/compile-object-load.c (compile_object_load): Support
470 2015-05-06 Jan Kratochvil <jan.kratochvil@redhat.com>
472 * compile/compile.c (compile_to_object): Make the cmd_string parameter
473 const. Use new variables for the const compatibility.
474 (eval_compile_command): Make the cmd_string parameter const.
475 * compile/compile.h (eval_compile_command): Make the cmd_string
478 2015-05-06 Joel Brobecker <brobecker@adacore.com>
480 * defs.h (deprecated_init_ui_hook): Delete. Remove associated
482 * top.c (deprecated_init_ui_hook): Delete.
483 (gdb_init): Remove handling of deprecated_init_ui_hook.
484 * interps.c (clear_interpreter_hooks): Remove handling of
485 deprecated_init_ui_hook.
486 * main.c (captured_main): Update comment.
488 2015-05-06 Joel Brobecker <brobecker@adacore.com>
490 * solib.c (_initialize_solib): Add "info dll" alias creation.
491 * windows-nat.c (set_windows_aliases): Delete.
492 (_initialize_windows_nat): Remove deprecated_init_ui_hook
494 * NEWS: Add news entry about "info dll" now being available
497 2015-05-05 Joel Brobecker <brobecker@adacore.com>
499 * ada-lang.c (value_assign_to_component): Reformat and improve
500 documentation. Remove all trailing spaces.
502 2015-05-05 Joel Brobecker <brobecker@adacore.com>
504 * inline-frame.c (inline_frame_sniffer, skip_inline_frames):
505 Stop counting inlined frames as soon as an out-of-line function
508 2014-05-05 Pierre-Marie de Rodat <derodat@adacore.com>
510 * dwarf2read.c (inherit_abstract_dies): Skip
511 DW_TAG_GNU_call_site dies while inheriting children of an
512 abstract DIE into a scope.
513 (read_lexical_block_scope): Inherit abstract DIE's for
516 2015-05-05 Joel Brobecker <brobecker@adacore.com>
518 * ada-valprint.c (val_print_packed_array_elements): Delete
519 variable "len". Add a type-length check when comparing two
520 consecutive elements of the array. Use the element's actual
521 length in call to value_contents_eq.
522 * ada-lang.c (ada_value_primitive_packed_val): Always return
523 a value whose type has been resolved.
525 2015-05-05 Joel Brobecker <brobecker@adacore.com>
527 * ada-lang.c (ada_value_primitive_packed_val): Recompute
528 BIT_SIZE and LEN if the size of the resolved type is smaller
529 than BIT_SIZE * HOST_CHAR_BIT.
531 2015-05-05 Joel Brobecker <brobecker@adacore.com>
533 * ada-lang.c (ada_value_primitive_packed_val): Use a more
534 correct address in call to value_at. Adjust call to
535 value_address accordingly.
537 2015-05-05 Joel Brobecker <brobecker@adacore.com>
539 * ada-valprint.c (ada_val_print_1): Resolve TYPE before trying
542 2015-05-05 Joel Brobecker <brobecker@adacore.com>
544 * dwarf2loc.h (struct property_addr_info): Add "valaddr" field.
545 * dwarf2loc.c (dwarf2_evaluate_property): Add handling of
547 * gdbtypes.h (resolve_dynamic_type): Add "valaddr" parameter.
548 * gdbtypes.c (resolve_dynamic_struct): Set pinfo.valaddr.
549 (resolve_dynamic_type_internal): Set pinfo.valaddr.
550 Add handling of addr_stack->valaddr.
551 (resolve_dynamic_type): Add "valaddr" parameter.
552 Set pinfo.valaddr field.
553 * ada-lang.c (ada_discrete_type_high_bound): Update call to
554 resolve_dynamic_type.
555 (ada_discrete_type_low_bound): Likewise.
556 * findvar.c (default_read_var_value): Likewise.
557 * value.c (value_from_contents_and_address): Likewise.
559 2015-05-05 Joel Brobecker <brobecker@adacore.com>
561 * gdbtypes.c (resolve_dynamic_array): Use
562 create_array_type_with_stride instead of create_array_type.
564 2015-04-30 DJ Delorie <dj@redhat.com>
566 * rl78-tdep.c (rl78_analyze_prologue): Pass RL78_ISA_DEFAULT to
569 2015-04-29 Doug Evans <dje@google.com>
572 * NEWS: Document new gdb.XMethodWorker.get_result_type method.
573 * eval.c (evaluate_subexp_standard) <OP_FUNCALL>: Handle
574 EVAL_AVOID_SIDE_EFFECTS for xmethods.
575 * extension-priv.h (struct extension_language_ops)
576 <get_xmethod_result_type>: New member.
577 * extension.c (get_xmethod_result_type): New function.
578 * extension.h (get_xmethod_result_type): Declare.
579 * python/py-xmethods.c (get_result_type_method_name): New static
581 (py_get_result_type_method_name): Ditto.
582 (gdbpy_get_xmethod_result_type): New function.
583 (gdbpy_initialize_xmethods): Initialize py_get_result_type_method_name.
584 * python/python-internal.h (gdbpy_get_xmethod_result_type): Declare.
585 * python/python.c (python_extension_ops): Add
586 gdbpy_get_xmethod_result_type.
587 * python/lib/gdb/xmethod.py (XMethodWorker): Add get_result_type.
588 * valarith.c (value_x_binop): Handle EVAL_AVOID_SIDE_EFFECTS for
590 (value_x_unop): Ditto.
591 * value.c (result_type_of_xmethod): New function.
592 * value.h (result_type_of_xmethod): Declare.
594 2015-04-29 Gary Benson <gbenson@redhat.com>
596 * solib.c (solib_find_1): Allow fd argument to be NULL.
597 (exec_file_find): Update comment.
598 (solib_find): Likewise.
599 * exec.c (exec_file_locate_attach): Use NULL as fd
600 argument to exec_file_find to avoid having to close
602 * infrun.c (follow_exec): Likewise.
604 2015-04-28 Doug Evans <dje@google.com>
607 * python/lib/gdb/printing.py (register_pretty_printer): Handle
608 name or __name__ attributes. Handle gdb module as first argument.
610 2015-04-28 Doug Evans <dje@google.com>
613 * python/py-prettyprint.c (print_children): Verify result of children
614 iterator. Provide better error message.
615 * python/python-internal..h (gdbpy_print_python_errors_p): Declare.
616 * python/python.c (gdbpy_print_python_errors_p): New function.
618 2015-04-28 Doug Evans <dje@google.com>
620 * gdbtypes.h (struct cplus_struct_type) <n_baseclasses>: Fix comment.
622 2015-04-28 Sasha Smundak <asmundak@google.com>
624 * NEWS: Mention gdb.Type.optimized_out method.
625 * python/py-type.c (typy_optimized_out): New function.
627 2015-04-28 John Baldwin <jhb@FreeBSD.org>
629 * fbsd-nat.c: Include "gdb_wait.h" instead of <sys/wait.h>.
631 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
633 * utils.c (init_page_info): Set rl_catch_sigwinch to zero.
634 (initialize_utils): Move call of init_page_info() to ...
635 * top.c (gdb_init): ... here.
637 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
639 * tui/tui-win.c (tui_sigwinch_handler): Remove now-stale comment.
640 (tui_sigwinch_handler): Still update our idea of
641 the terminal's width and height even when TUI is not active.
643 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
645 * utils.h (set_screen_width_and_height): Declare.
646 * utils.c (set_screen_width_and_height): Define.
647 * tui/tui-win.c (tui_update_gdb_sizes): Use it.
649 2015-04-28 Gary Benson <gbenson@redhat.com>
651 * infrun.c (solist.h): New include.
652 (follow_exec): Use exec_file_find to prefix execd_pathname
655 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
657 * tui/tui-source.c (tui_set_source_content): Avoid calling
658 strcpy() when offset is 0.
660 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
663 * tui/tui-data.c (tui_free_window): Don't free the locator
664 window when passed an SRC_WIN or a DISASSEM_WIN.
666 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
668 * tui/tui-data.h (struct tui_win_element): Forward-declare.
669 (tui_win_content): Move declaration.
670 (struct tui_gen_win_info): Give 'content' field the
671 type tui_win_content.
672 * tui/tui-data.c (init_content_element): Remove redundant and
674 (tui_add_content_elements): Remove erroneous cast.
675 * tui/tui-disasm.c (tui_set_disassem_content): Remove redundant
677 (tui_get_begin_asm_address): Likewise.
678 * tui/tui-regs.c (tui_show_registers): Likewise.
679 (tui_show_register_group): Likewise.
680 (tui_display_registers_from): Likewise.
681 (tui_check_register_values): Likewise.
682 * tui/tui-source.c (tui_set_source_content): Likewise.
683 (tui_set_source_content_nil): Likewise.
684 (tui_source_is_displayed): Likewise.
685 * tui/tui-stack.c (tui_show_locator_content): Likewise.
686 (tui_set_locator_fullname): Likewise.
687 (tui_set_locator_info): Likewise.
688 (tui_show_frame_info): Likewise.
689 * tui/tui-winsource.c (tui_clear_source_content): Likewise.
690 (tui_show_source_line): Likewise.
691 (tui_horizontal_source_scroll): Likewise.
692 (tui_update_breakpoint_info): Likewise.
693 (tui_set_exec_info_content): Likewise.
694 (tui_show_exec_info_content): Likewise.
695 (tui_alloc_source_buffer): Likewise.
696 (tui_line_is_displayed): Likewise.
697 (tui_addr_is_displayed): Likewise.
699 2015-04-27 John Baldwin <jhb@FreeBSD.org>
701 * fbsd-nat.c: (fbsd_wait) [PL_FLAG_EXEC]: Report TARGET_WAITKIND_EXECD
702 event if PL_FLAG_EXEC is set.
703 [PL_FLAG_EXEC] (fbsd_insert_exec_catchpoint): New function.
704 [PL_FLAG_EXEC] (fbsd_remove_exec_catchpoint): New function.
705 (fbsd_nat_add_target) [PL_FLAG_EXEC]: Set
706 "to_insert_exec_catchpoint" to "fbsd_insert_exec_catchpoint".
707 Set "to_remove_exec_catchpoint" to "fbsd_remove_exec_catchpoint".
709 2015-04-27 John Baldwin <jhb@FreeBSD.org>
711 * fbsd-nat.c: [PT_LWPINFO] New variable super_wait.
712 [TDP_RFPPWAIT] New variable fbsd_pending_children.
713 [TDP_RFPPWAIT] (fbsd_remember_child): New function.
714 [TDP_RFPPWAIT] (fbsd_is_child_pending): New function.
715 [TDP_RFPPWAIT] (fbsd_fetch_kinfo_proc): New function.
716 [PT_LWPINFO] (fbsd_wait): New function.
717 [TDP_RFPPWAIT] (fbsd_follow_fork): New function.
718 [TDP_RFPPWAIT] (fbsd_insert_fork_catchpoint): New function.
719 [TDP_RFPPWAIT] (fbsd_remove_fork_catchpoint): New function.
720 [TDP_RFPPWAIT] (fbsd_insert_vfork_catchpoint): New function.
721 [TDP_RFPPWAIT] (fbsd_remove_vfork_catchpoint): New function.
722 [TDP_RFPPWAIT] (fbsd_enable_follow_fork): New function.
723 [TDP_RFPPWAIT] (fbsd_post_startup_inferior): New function.
724 [TDP_RFPPWAIT] (fbsd_post_attach): New function.
725 (fbsd_nat_add_target) [PT_LWPINFO] Set "to_wait" to
727 [TDP_RFPPWAIT] Set "to_follow_fork" to "fbsd_follow_fork".
728 Set "to_insert_fork_catchpoint" to "fbsd_insert_fork_catchpoint".
729 Set "to_remove_fork_catchpoint" to "fbsd_remove_fork_catchpoint".
730 Set "to_insert_vfork_catchpoint" to "fbsd_insert_vfork_catchpoint".
731 Set "to_remove_vfork_catchpoint" to "fbsd_remove_vfork_catchpoint".
732 Set "to_post_startup_inferior" to "fbsd_post_startup_inferior".
733 Set "to_post_attach" to "fbsd_post_attach".
735 2015-04-27 John Baldwin <jhb@FreeBSD.org>
737 * fbsd-nat.c (fbsd_pid_to_exec_file): Mark static.
738 (fbsd_find_memory_regions): Mark static.
739 (fbsd_nat_add_target): New function.
740 * fbsd-nat.h: Export fbsd_nat_add_target and remove prototypes for
741 fbsd_pid_to_exec_file and fbsd_find_memory_regions.
742 * amd64fbsd-nat.c (_initialize_amd64fbsd_nat): Use fbsd_nat_add_target.
743 * i386fbsd-nat.c (_initialize_i386fbsd_nat): Likewise.
744 * ppcfbsd-nat.c (_initialize_ppcfbsd_nat): Likewise.
745 * sparc64fbsd-nat.c (_initialize_sparc64fbsd_nat): Likewise.
747 2015-04-27 Gary Benson <gbenson@redhat.com>
749 * objfiles.c (allocate_objfile): Do not attempt to expand name
750 if name is a "target:" filename.
751 * auto-load.c (load_auto_scripts_for_objfile): Do not attempt
752 to load auto-load scripts for objfiles with "target:" filenames.
754 2015-04-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
756 * s390-linux-tdep.c: Include "elf/s390.h" and "elf-bfd.h".
757 (enum s390_vector_abi_kind): New enum.
758 (struct gdbarch_tdep)<vector_abi>: New field.
759 (s390_effective_inner_type): Add parameter min_size. Stop
760 unwrapping if the inner type is smaller than min_size.
761 (s390_function_arg_float): Adjust call to
762 s390_effective_inner_type.
763 (s390_function_arg_vector): New function.
764 (s390_function_arg_integer): Adjust comment.
765 (struct s390_arg_state)<vr>: New field.
766 (s390_handle_arg): Add parameter 'is_unnamed'. Pass vector
767 arguments according to vector ABI when appropriate.
768 (s390_push_dummy_call): Initialize the argument state's field
769 'vr'. Adjust calls to s390_handle_arg.
770 (s390_register_return_value): Handle vector return values.
771 (s390_return_value): Apply the "register" return value convention
772 to a vector when appropriate.
773 (s390_gdbarch_init): Initialize tdep->vector_abi.
774 * NEWS: Announce S390 vector ABI support.
776 2015-04-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
778 * s390-linux-tdep.c (s390_return_value_convention): Remove
779 function. Inline its logic...
780 (s390_return_value): ...here. Instead, move the handling of the
781 "register" return value convention...
782 (s390_register_return_value): ...here. New function.
784 2015-04-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
787 (is_float_singleton): Remove function. Move the "singleton" part
789 (s390_effective_inner_type): ...here. New function.
790 (is_float_like): Remove function. Inline its logic...
791 (s390_function_arg_float): ...here.
792 (is_pointer_like, is_integer_like, is_struct_like): Remove
793 functions. Inline their logic...
794 (s390_function_arg_integer): ...here.
795 (s390_function_arg_pass_by_reference): Remove function.
796 (extend_simple_arg): Remove function.
797 (alignment_of): Remove function.
798 (struct s390_arg_state): New structure.
799 (s390_handle_arg): New function.
800 (s390_push_dummy_call): Move parameter placement logic to the new
801 function s390_handle_arg. Call it for calculating the stack area
802 sizes first, and again for actually writing the parameters.
804 2015-04-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
806 * s390-linux-tdep.c (is_power_of_two): Add comment. Return
807 false if the argument is zero.
809 2015-04-27 Pierre-Marie de Rodat <derodat@adacore.com>
811 * ada-lang.c (template_to_static_fixed_type): Return input type
812 when it is already fixed. Cache the input type itself when not
813 creating a static fixed copy. Make it explicit that we never
814 molestate the input type.
815 * gdbtypes.c (resolve_dynamic_struct): Reset the
816 TYPE_TARGET_TYPE field for resolved copies.
818 2015-04-27 Joel Brobecker <brobecker@adacore.com>
820 * ada-lang.c (ada_is_tagged_type): Add call to ada_check_typedef.
821 (ada_lookup_struct_elt_type): Remove calls to ada_check_typedef.
822 (template_to_static_fixed_type): Call ada_check_typedef only
825 2015-04-24 Andrew Burgess <andrew.burgess@embecosm.com>
827 * cli/cli-dump.c (srec_dump_command): Add internationalization
829 (ihex_dump_command): Likewise.
830 (tekhex_dump_command): Likewise.
831 (binary_dump_command): Likewise.
832 (binary_append_command): Likewise.
834 2015-04-24 Andrew Burgess <andrew.burgess@embecosm.com>
836 * cli/cli-dump.c (verilog_cmdlist): New variable.
837 (dump_verilog_memory): New function.
838 (dump_verilog_value): New function.
839 (verilog_dump_command): New function.
840 (_initialize_cli_dump): Add new commands to support verilog dump
842 * NEWS: Add entry for "dump verilog".
844 2015-04-24 Pierre-Marie de Rodat <derodat@adacore.com>
846 * gdbtypes.c (print_gnat_stuff): Do not recurse on the
847 descriptive type when there is none.
849 2015-04-23 Patrick Palka <patrick@parcs.ath.cx>
851 * tui/tui-win.c (tui_async_resize_screen): Call
852 rl_resize_terminal().
854 2015-04-22 Jon Turney <jon.turney@dronecode.org.uk>
856 * windows-nat.c (handle_output_debug_string): Don't change
857 current_event.dwThreadId.
858 (get_windows_debug_event): Use thread_id, rather than relying on
859 current_event.dwThreadId being changed.
861 2015-04-22 Jon Turney <jon.turney@dronecode.org.uk>
863 * windows-nat.c (windows_continue): Report an error if
864 ContinueDebugEvent() fails.
866 2015-04-16 Jon Turney <jon.turney@dronecode.org.uk>
868 * windows-nat.c (windows_resume): Fix misspelling in debug output.
870 2015-04-16 Jon Turney <jon.turney@dronecode.org.uk>
872 * windows-nat.c (get_windows_debug_event): Replace retval with
873 thread_id throughout. Update stale comment.
875 2015-04-16 Jon Turney <jon.turney@dronecode.org.uk>
877 * windows-nat.c (get_windows_debug_event): Don't use ternary
878 conditional operator.
880 2015-04-21 Pierre Muller <muller@sourceware.org>
883 p-exp.y (yylex): Reorganize code to return the matched pattern
886 2015-04-21 Gary Benson <gbenson@redhat.com>
888 * common/fileio.h (fileio_to_host_openflags): New declaration.
889 * common/fileio.c (fcntl.h): New include.
890 (fileio_to_host_openflags): New function, factored out from...
891 * inf-child.c (inf_child_fileio_open_flags_to_host): ...here.
894 2015-04-21 Kevin Buettner <kevinb@redhat.com>
896 * rl78-tdep.c (RL78_SP_ADDR): Define.
897 (opc_reg_to_gdb_regnum): New static function.
898 (rl78_analyze_prologue): Recognize instructions forming slightly
899 more interesting prologues.
901 2015-04-20 Pierre-Marie de Rodat <derodat@adacore.com>
904 2015-04-03 Pierre-Marie de Rodat <derodat@adacore.com>
905 * gdbtypes.c (is_dynamic_type_internal): Remove special handling of
906 TYPE_CODE_REF types so that they are not considered as dynamic
907 depending on the referenced type.
908 (resolve_dynamic_type_internal): Likewise.
910 2015-04-20 Pierre-Marie de Rodat <derodat@adacore.com>
913 2015-04-03 Pierre-Marie de Rodat <derodat@adacore.com>
914 * gdbtypes.c (is_dynamic_type_internal): Remove the unused
915 "top_level" parameter.
916 (resolve_dynamic_type_internal): Remove the unused "top_level"
917 parameter. Update call to is_dynamic_type_internal.
918 (is_dynamic_type): Update call to is_dynamic_type_internal.
919 (resolve_dynamic_range): Update call to
920 resolve_dynamic_type_internal.
921 (resolve_dynamic_union): Likewise.
922 (resolve_dynamic_struct): Likewise.
923 (resolve_dynamic_type): Likewise.
925 2015-04-19 Gabriel Krisman Bertazi <gabriel@krisman.be>
927 * breakpoint.c (update_dprintf_command_list): Remove duplicated
930 2015-04-20 Thomas Schwinge <thomas@codesourcery.com>
932 * reply_mig_hack.awk: Robustify parsing.
934 * reply_mig_hack.awk: Don't bother to declare an intermediate
935 function pointer variable.
937 2015-04-17 Doug Evans <dje@google.com>
939 * solib-svr4.c (svr4_exec_displacement): Rename outer "displacement"
940 to "exec_displacement" to avoid confusion with inner use of the name.
942 2015-04-17 Pedro Alves <palves@redhat.com>
944 * arm-linux-nat.c (arm_linux_can_use_hw_breakpoint): Return zero
945 if HW point of TYPE isn't supported.
947 2015-04-17 Yao Qi <yao.qi@linaro.org>
948 Pedro Alves <palves@redhat.com>
950 * target.h (target_can_use_hardware_watchpoint): Update comments.
953 2015-04-17 Gary Benson <gbenson@redhat.com>
955 * remote.c (remote_add_inferior): New argument try_open_exec.
956 If nonzero, attempt to open the inferior's executable file as
957 the main executable if no main executable is open already.
959 * NEWS: Mention that GDB now supports automatic location and
960 retrieval of executable + files from remote targets.
962 2015-04-17 Gary Benson <gbenson@redhat.com>
964 * target.h (TARGET_OBJECT_EXEC_FILE): New enum value.
965 * remote.c (PACKET_qXfer_exec_file): Likewise.
966 (remote_protocol_features): Register the
967 "qXfer:exec-file:read" feature.
968 (remote_xfer_partial): Handle TARGET_OBJECT_EXEC_FILE.
969 (remote_pid_to_exec_file): New function.
970 (init_remote_ops): Initialize to_pid_to_exec_file.
971 (_initialize_remote): Register new "set/show remote
972 pid-to-exec-file-packet" command.
973 * NEWS: Announce new qXfer:exec-file:read packet.
975 2015-04-17 Gary Benson <gbenson@redhat.com>
977 * nat/linux-procfs.h (linux_proc_pid_to_exec_file):
979 * nat/linux-procfs.c (linux_proc_pid_to_exec_file):
980 New function, factored out from...
981 * linux-nat.c (linux_child_pid_to_exec_file): ...here.
983 2015-04-17 Gary Benson <gbenson@redhat.com>
985 * exec.c (solist.h): New include.
986 (exec_file_locate_attach): Prefix absolute executable
987 paths with gdb_sysroot if set.
988 * NEWS: Mention that executable paths may be prepended
991 2015-04-17 Gary Benson <gbenson@redhat.com>
993 * solist.h (exec_file_find): New declaration.
994 * solib.c (solib_find_1): New function, factored out from...
995 (solib_find): ...here.
996 (exec_file_find): New function.
998 2015-04-17 Gary Benson <gbenson@redhat.com>
1000 * gdbcore.h (exec_file_locate_attach): New declaration.
1001 * exec.c (exec_file_locate_attach): New function, factored
1003 * infcmd.c (attach_command_post_wait): ...here.
1005 2015-04-17 Mike Frysinger <vapier@gentoo.org>
1007 * MAINTAINERS: Add myself for Blackfin/write-after-approval.
1009 2015-04-16 Yao Qi <yao.qi@linaro.org>
1011 * infrun.c (maybe_software_singlestep): Declare.
1012 (displaced_step_fixup): Call maybe_software_singlestep.
1014 2015-04-15 Doug Evans <dje@google.com>
1016 * psymtab.c (psym_expand_symtabs_matching): Add QUIT call.
1018 2015-04-15 Doug Evans <dje@google.com>
1020 * dwarf2read.c (dw2_expand_symtabs_matching): Add some QUIT calls.
1022 2015-04-15 Simon Marchi <simon.marchi@ericsson.com>
1024 * python/lib/gdb/command/unwinders.py: Add parentheses.
1026 2015-04-15 Yao Qi <yao.qi@linaro.org>
1028 * arm-linux-tdep.c (arm_linux_copy_svc): Update debug message.
1030 2015-04-15 Yao Qi <yao.qi@linaro.org>
1032 * arm-linux-tdep.c (arm_linux_copy_svc): Fix indentation.
1034 2015-04-15 Yao Qi <yao.qi@linaro.org>
1036 * arm-linux-tdep.c (arm_linux_cleanup_svc): Use
1037 dsc->insn_size instead of 4.
1039 2015-04-14 Gary Benson <gbenson@redhat.com>
1041 * jit.c (mem_bfd_iovec_stat): Zero supplied buffer.
1042 * minidebug.c (lzma_stat): Likewise.
1043 * solib-spu.c (spu_bfd_iovec_stat): Likewise.
1044 * spu-linux-nat.c (spu_bfd_iovec_stat): Likewise.
1046 2015-04-13 Stan Shebs <stanshebs@google.com>
1048 * MAINTAINERS: Update my email address.
1050 2015-04-13 John Baldwin <jhb@FreeBSD.org>
1052 * amd64-tdep.c (amd64_target_description): New function.
1053 * amd64-tdep.h: Export amd64_target_description and tdesc_amd64.
1054 * amd64bsd-nat.c [PT_GETXSTATE_INFO]: New variable amd64bsd_xsave_len.
1055 (amd64bsd_fetch_inferior_registers) [PT_GETXSTATE_INFO]: Handle
1056 x86 extended save area.
1057 (amd64bsd_store_inferior_registers) [PT_GETXSTATE_INFO]: Likewise.
1058 * amd64bsd-nat.h: Export amd64bsd_xsave_len.
1059 * amd64fbsd-nat.c (amd64fbsd_read_description): New function.
1060 (_initialize_amd64fbsd_nat): Set "to_read_description" to
1061 "amd64fbsd_read_description".
1062 * amd64fbsd-tdep.c (amd64fbsd_core_read_description): New function.
1063 (amd64fbsd_supply_xstateregset): New function.
1064 (amd64fbsd_collect_xstateregset): New function.
1065 Add "amd64fbsd_xstateregset".
1066 (amd64fbsd_iterate_over_regset_sections): New function.
1067 (amd64fbsd_init_abi): Set "xsave_xcr0_offset" to
1068 "I386_FBSD_XSAVE_XCR0_OFFSET".
1069 Add "iterate_over_regset_sections" gdbarch method.
1070 Add "core_read_description" gdbarch method.
1071 * i386-tdep.c (i386_target_description): New function.
1072 * i386-tdep.h: Export i386_target_description and tdesc_i386.
1073 * i386bsd-nat.c [PT_GETXSTATE_INFO]: New variable i386bsd_xsave_len.
1074 (i386bsd_fetch_inferior_registers) [PT_GETXSTATE_INFO]: Handle
1075 x86 extended save area.
1076 (i386bsd_store_inferior_registers) [PT_GETXSTATE_INFO]: Likewise.
1077 * i386bsd-nat.h: Export i386bsd_xsave_len.
1078 * i386fbsd-nat.c (i386fbsd_read_description): New function.
1079 (_initialize_i386fbsd_nat): Set "to_read_description" to
1080 "i386fbsd_read_description".
1081 * i386fbsd-tdep.c (i386fbsd_core_read_xcr0): New function.
1082 (i386fbsd_core_read_description): New function.
1083 (i386fbsd_supply_xstateregset): New function.
1084 (i386fbsd_collect_xstateregset): New function.
1085 Add "i386fbsd_xstateregset".
1086 (i386fbsd_iterate_over_regset_sections): New function.
1087 (i386fbsd4_init_abi): Set "xsave_xcr0_offset" to
1088 "I386_FBSD_XSAVE_XCR0_OFFSET".
1089 Add "iterate_over_regset_sections" gdbarch method.
1090 Add "core_read_description" gdbarch method.
1091 * i386fbsd-tdep.h: New file.
1093 2015-04-11 Jan Kratochvil <jan.kratochvil@redhat.com>
1095 * NEWS (Changes since GDB 7.9): Add removed -xdb.
1096 * breakpoint.c (command_line_is_silent): Remove xdb_commands
1098 (_initialize_breakpoint): Remove xdb_commands for bc, ab, sb, db, ba
1100 * cli/cli-cmds.c (_initialize_cli_cmds): Remove xdb_commands for v and
1102 * cli/cli-decode.c (find_command_name_length): Remove xdb_commands
1104 * defs.h (xdb_commands): Remove declaration.
1105 * f-valprint.c (_initialize_f_valprint): Remove xdb_commands for lc.
1106 * guile/scm-cmd.c (command_classes): Remove xdb from comment.
1107 * infcmd.c (run_no_args_command, go_command): Remove.
1108 (_initialize_infcmd): Remove xdb_commands for S, go, g, R and lr.
1109 * infrun.c (xdb_handle_command): Remove.
1110 (_initialize_infrun): Remove xdb_commands for lz and z.
1111 * main.c (xdb_commands): Remove variable.
1112 (captured_main): Remove "xdb" from long_options.
1113 (print_gdb_help): Remove --xdb from help.
1114 * python/py-cmd.c (gdbpy_initialize_commands): Remove xdb from comment.
1115 * source.c (_initialize_source): Remove xdb_commands for D, ld, / and ?.
1116 * stack.c (backtrace_full_command, args_plus_locals_info)
1117 (current_frame_command): Remove.
1118 (_initialize_stack): Remove xdb_commands for t, T and l.
1119 * symtab.c (_initialize_symtab): Remove xdb_commands for lf and lg.
1120 * thread.c (_initialize_thread): Remove xdb_commands condition.
1121 * tui/tui-layout.c (tui_toggle_layout_command)
1122 (tui_toggle_split_layout_command, tui_handle_xdb_layout): Remove.
1123 (_initialize_tui_layout): Remove xdb_commands for td and ts.
1124 * tui/tui-regs.c (tui_scroll_regs_forward_command)
1125 (tui_scroll_regs_backward_command): Remove.
1126 (_initialize_tui_regs): Remove xdb_commands for fr, gr, sr, +r and -r.
1127 * tui/tui-win.c (tui_xdb_set_win_height_command): Remove.
1128 (_initialize_tui_win): Remove xdb_commands for U and w.
1129 * utils.c (pagination_on_command, pagination_off_command): Remove.
1130 (initialize_utils): Remove xdb_commands for am and sm.
1132 2015-04-10 Pedro Alves <palves@redhat.com>
1134 * infrun.c (displaced_step_fixup): Switch to the event ptid
1135 earlier. If the thread stopped for a watchpoint and the
1136 target/arch has non-continuable watchpoints, cancel the displaced
1138 (resume): Don't start a displaced step if in-line step-over info
1141 2015-04-10 Pedro Alves <palves@redhat.com>
1143 * infrun.c (displaced_step_in_progress): New function.
1144 (do_target_resume): Advise target to report all signals if
1147 2015-04-10 Pedro Alves <palves@redhat.com>
1150 * infrun.c (process_event_stop_test): Don't assume a step-resume
1151 is set if tp->stepped_breakpoint is true.
1153 2015-04-10 Yao Qi <yao.qi@linaro.org>
1155 * arm-tdep.c (install_alu_reg): Update comment.
1156 (thumb_copy_alu_reg): Remove local variable rn. Update
1157 debugging message. Use r2 instead of r1 in the modified
1160 2015-04-10 Pedro Alves <palves@redhat.com>
1163 * amd64-linux-tdep.c (amd64_linux_init_abi_common): Install
1164 linux_displaced_step_location as gdbarch_displaced_step_location
1166 * arm-linux-tdep.c (arm_linux_init_abi): Likewise.
1167 * i386-linux-tdep.c (i386_linux_init_abi): Likewise.
1168 * linux-tdep.c (linux_displaced_step_location): New function,
1169 based on ppc_linux_displaced_step_location.
1170 * linux-tdep.h (linux_displaced_step_location): New declaration.
1171 * ppc-linux-tdep.c (ppc_linux_entry_point_addr): Delete.
1172 (ppc_linux_inferior_created, ppc_linux_displaced_step_location):
1174 (ppc_linux_init_abi): Install linux_displaced_step_location as
1175 gdbarch_displaced_step_location hook, even without Cell/B.E..
1176 (_initialize_ppc_linux_tdep): Don't install
1177 ppc_linux_inferior_created as inferior_created observer.
1178 * s390-linux-tdep.c (s390_gdbarch_init): Install
1179 linux_displaced_step_location as gdbarch_displaced_step_location
1182 2015-04-09 Gary Benson <gbenson@redhat.com>
1184 * common/common-remote-fileio.h: Rename to...
1185 * common/fileio.h: ...this. Update all references.
1186 (remote_fileio_to_fio_error): Rename to...
1187 (host_to_fileio_error): ...this.
1188 (remote_fileio_to_be): Rename to...
1189 (host_to_bigendian): ...this. Update all callers.
1190 (remote_fileio_to_fio_uint): Rename to...
1191 (host_to_fileio_uint): ...this. Update all callers.
1192 (remote_fileio_to_fio_time): Rename to...
1193 (host_to_fileio_time): ...this. Update all callers.
1194 (remote_fileio_to_fio_stat): Rename to...
1195 (host_to_fileio_stat): ...this.
1196 Update all references.
1197 * common/common-remote-fileio.c: Rename to...
1198 * common/fileio.c: ...this. Update all references.
1199 (remote_fileio_to_fio_error): Rename to...
1200 (host_to_fileio_error): ...this. Update all callers.
1201 (remote_fileio_mode_to_target): Rename to...
1202 (fileio_mode_pack): ...this. Update all callers.
1203 (remote_fileio_to_fio_mode): Rename to...
1204 (host_to_fileio_mode): ...this. Update all callers.
1205 (remote_fileio_to_fio_ulong): Rename to...
1206 (host_to_fileio_ulong): ...this. Update all callers.
1207 (remote_fileio_to_fio_stat): Rename to...
1208 (host_to_fileio_stat): ...this. Update all callers.
1210 2015-04-09 Andy Wingo <wingo@igalia.com>
1212 * guile/scm-frame.c (gdbscm_frame_read_register): New function.
1213 (frame_functions): Bind gdbscm_frame_read_register to
1214 frame-read-register.
1215 * guile/lib/gdb.scm (frame-read-register): Export.
1217 2015-04-09 Gary Benson <gbenson@redhat.com>
1219 * common/common-remote-fileio.h (remote_fileio_to_fio_error):
1221 * common/common-remote-fileio.c (remote_fileio_to_fio_error):
1222 New function, factored out the named functions below.
1223 * inf-child.c (gdb/fileio.h): Remove include.
1224 (common-remote-fileio.h): New include.
1225 (inf_child_errno_to_fileio_error): Remove function. Update
1226 all callers to use remote_fileio_to_fio_error.
1227 * remote-fileio.c (remote_fileio_errno_to_target): Likewise.
1229 2015-04-09 Andy Wingo <wingo@igalia.com>
1231 * MAINTAINERS (Write After Approval): Add Andy Wingo.
1233 2015-04-09 H.J. Lu <hongjiu.lu@intel.com>
1235 * acinclude.m4: (GDB_AC_CHECK_BFD): Set ZLIBDIR with $zlibdir.
1236 Replace $zlibdir with $ZLIBDIR in LDFLAGS.
1237 * configure: Regenerated.
1239 2015-04-09 Pedro Alves <palves@redhat.com>
1241 * gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add strtok_r.
1242 * gnulib/Makefile.in (aclocal_m4_deps): Add import/m4/strtok_r.m4.
1243 * gnulib/configure, gnulib/config.in, gnulib/aclocal.m4: Regenerate.
1244 * gnulib/import/Makefile.am: Update.
1245 * gnulib/import/Makefile.in: Update.
1246 * gnulib/import/m4/gnulib-cache.m4: Update.
1247 * gnulib/import/m4/gnulib-comp.m4: Update.
1248 * gnulib/import/m4/strtok_r.m4: New file.
1249 * gnulib/import/strtok_r.c: New file.
1251 2015-04-09 Pedro Alves <palves@redhat.com>
1253 * gnulib/update-gnulib.sh (aclocal version check): Filter out
1254 "called too early to check prototype".
1256 2015-04-08 Sergio Durigan Junior <sergiodj@redhat.com>
1259 * python/py-cmd.c (cmdpy_completer_helper): Adjust function to not
1260 use a caching mechanism. Adjust comments and code to reflect
1261 that. Replace 'sizeof' by 'strlen' when fetching 'wordobj'.
1262 (cmdpy_completer_handle_brkchars): Adjust call to
1263 cmdpy_completer_helper. Call Py_XDECREF for 'resultobj'.
1264 (cmdpy_completer): Likewise.
1266 2015-04-08 Yao Qi <yao.qi@linaro.org>
1268 * spu-tdep.c (spu_gdbarch_init): Don't call
1269 set_gdbarch_cannot_step_breakpoint.
1271 2015-04-07 Sergio Durigan Junior <sergiodj@redhat.com>
1273 * linux-tdep.c (decode_vmflags): Initialize 'saveptr'.
1275 2015-04-07 Pedro Alves <palves@redhat.com>
1277 * gdbthread.h (ALL_NON_EXITED_THREADS_SAFE): Rename to ...
1278 (ALL_THREADS_SAFE): ... this, and don't skip exited threads.
1279 (delete_exited_threads): New declaration.
1280 * infrun.c (follow_exec): Use ALL_THREADS_SAFE.
1281 * linux-nat.c (linux_nat_update_thread_list): New function.
1282 (linux_nat_add_target): Install it.
1283 * remote.c (remote_update_thread_list): Use ALL_THREADS_SAFE.
1284 * thread.c (prune_threads): Use ALL_THREADS_SAFE.
1285 (delete_exited_threads): New function.
1287 2015-04-07 Pedro Alves <pedro@codesourcery.com>
1289 * infrun.c (resume) <displaced stepping debug output>: Get the
1290 leader thread's regcache, not resume_ptid's.
1292 2015-04-06 Doug Evans <xdje42@gmail.com>
1294 * symtab.c (hash_symbol_entry): Hash STRUCT_DOMAIN symbols as
1296 (symbol_cache_lookup): Clarify use of bsc_ptr, slot_ptr parameters.
1297 Include symbol domain in debugging output.
1299 2015-04-06 Pedro Alves <palves@redhat.com>
1300 Bernd Edlinger <bernd.edlinger@hotmail.de>
1302 * configure.ac: Remove the mingw32-specific stub-termcap.o
1303 fallback, and instead fallback to the stub termcap on all hosts.
1304 * configure: Regenerate.
1305 * stub-termcap.c [!__MINGW32__] (PC, BC, UP): Define as weak
1308 2015-04-03 Pierre-Marie de Rodat <derodat@adacore.com>
1310 * gdbtypes.c (is_dynamic_type_internal): Remove the unused
1311 "top_level" parameter.
1312 (resolve_dynamic_type_internal): Remove the unused "top_level"
1313 parameter. Update call to is_dynamic_type_internal.
1314 (is_dynamic_type): Update call to is_dynamic_type_internal.
1315 (resolve_dynamic_range): Update call to
1316 resolve_dynamic_type_internal.
1317 (resolve_dynamic_union): Likewise.
1318 (resolve_dynamic_struct): Likewise.
1319 (resolve_dynamic_type): Likewise.
1321 2015-04-03 Pierre-Marie de Rodat <derodat@adacore.com>
1323 * gdbtypes.c (is_dynamic_type_internal): Remove special handling of
1324 TYPE_CODE_REF types so that they are not considered as dynamic
1325 depending on the referenced type.
1326 (resolve_dynamic_type_internal): Likewise.
1328 2015-04-02 H.J. Lu <hongjiu.lu@intel.com>
1330 * Makefile.in (top_srcdir): New.
1331 * configure: Regenerated.
1333 2015-04-02 Gary Benson <gbenson@redhat.com>
1335 * NEWS: Announce the new default sysroot of "target:".
1337 2015-04-02 Gary Benson <gbenson@redhat.com>
1339 * main.c (captured_main): Set gdb_sysroot to "target:"
1340 if not otherwise set.
1342 2015-04-02 Gary Benson <gbenson@redhat.com>
1344 * exec.c (exec_file_attach): Support "target:" filenames.
1346 2015-04-02 Gary Benson <gbenson@redhat.com>
1348 * solib.c (solib_find): Strip "target:" prefix from sysroot
1349 if accessing local files.
1351 2015-04-02 Gary Benson <gbenson@redhat.com>
1353 * symfile.c (symfile_bfd_open): Reorder to remove duplicated
1354 checks and error messages.
1356 2015-04-02 Gary Benson <gbenson@redhat.com>
1358 * remote.h (REMOTE_SYSROOT_PREFIX): Remove definition.
1359 (remote_filename_p): Remove declaration.
1360 (remote_bfd_open): Likewise.
1361 * remote.c (remote_bfd_iovec_open): Remove function.
1362 (remote_bfd_iovec_close): Likewise.
1363 (remote_bfd_iovec_pread): Likewise.
1364 (remote_bfd_iovec_stat): Likewise.
1365 (remote_filename_p): Likewise.
1366 (remote_bfd_open): Likewise.
1367 * symfile.h (gdb_bfd_open_maybe_remote): Remove declaration.
1368 * symfile.c (separate_debug_file_exists): Use gdb_bfd_open.
1369 (gdb_bfd_open_maybe_remote): Remove function.
1370 (symfile_bfd_open): Replace remote filename check with
1371 target filename check.
1372 (reread_symbols): Use gdb_bfd_open.
1373 * build-id.c (gdbcore.h): New include.
1374 (build_id_to_debug_bfd): Use gdb_bfd_open.
1375 * infcmd.c (attach_command_post_wait): Remove remote filename
1377 * solib.c (solib_find): Replace remote-specific handling with
1378 target-specific handling. Update comments where necessary.
1379 (solib_bfd_open): Replace remote-specific handling with
1380 target-specific handling.
1381 (gdb_sysroot_changed): New function.
1382 (_initialize_solib): Call the above when gdb_sysroot changes.
1383 * windows-tdep.c (gdbcore.h): New include.
1384 (windows_xfer_shared_library): Use gdb_bfd_open.
1386 2015-04-02 Gary Benson <gbenson@redhat.com>
1388 * gdb/gdb_bfd.h (TARGET_SYSROOT_PREFIX): New definition.
1389 (is_target_filename): New declaration.
1390 (gdb_bfd_has_target_filename): Likewise.
1391 (gdb_bfd_open): Update documentation comment.
1392 * gdb_bfd.c (target.h): New include.
1393 (gdb/fileio.h): Likewise.
1394 (is_target_filename): New function.
1395 (gdb_bfd_has_target_filename): Likewise.
1396 (fileio_errno_to_host): Likewise.
1397 (gdb_bfd_iovec_fileio_open): Likewise.
1398 (gdb_bfd_iovec_fileio_pread): Likewise.
1399 (gdb_bfd_iovec_fileio_close): Likewise.
1400 (gdb_bfd_iovec_fileio_fstat): Likewise.
1401 (gdb_bfd_open): Use target fileio to access paths prefixed
1402 with "target:" where necessary.
1404 2015-04-02 Gary Benson <gbenson@redhat.com>
1406 * target.h (struct target_ops) <to_filesystem_is_local>:
1408 (target_filesystem_is_local): New macro.
1409 * target-delegates.c: Regenerate.
1410 * remote.c (remote_filesystem_is_local): New function.
1411 (init_remote_ops): Initialize to_filesystem_is_local.
1413 2015-04-02 Gary Benson <gbenson@redhat.com>
1415 * target.h (struct target_ops) <to_fileio_fstat>: New field.
1416 (target_fileio_fstat): New declaration.
1417 * target.c (target_fileio_fstat): New function.
1418 * inf-child.c (inf_child_fileio_fstat): Likewise.
1419 (inf_child_target): Initialize to_fileio_fstat.
1420 * remote.c (init_remote_ops): Likewise.
1422 2015-04-01 Sasha Smundak <asmundak@google.com>
1424 * Makefile.in (SUBDIR_PYTHON_OBJS): Add py-unwind.o.
1425 (SUBDIR_PYTHON_SRCS): Add py-unwind.c.
1426 (py-unwind.o): New recipe.
1427 * NEWS: mention Python frame unwinding.
1428 * data-directory/Makefile.in (PYTHON_FILE_LIST): Add
1429 gdb/unwinder.py and gdb/command/unwinder.py
1430 * python/lib/gdb/__init__.py (packages): Add frame_unwinders
1432 (execute_unwinders): New function.
1433 * python/lib/gdb/command/unwinders.py: New file.
1434 * python/lib/gdb/unwinder.py: New file.
1435 * python/py-objfile.c (objfile_object): Add frame_unwinders field.
1436 (objfpy_dealloc): Decrement frame_unwinders reference count.
1437 (objfpy_initialize): Create frame_unwinders list.
1438 (objfpy_get_frame_unwinders): New function.
1439 (objfpy_set_frame_unwinders): Ditto.
1440 (objfile_getset): Add frame_unwinders attribute to Objfile.
1441 * python/py-progspace.c (pspace_object): Add frame_unwinders field.
1442 (pspy_dealloc): Decrement frame_unwinders reference count.
1443 (pspy_initialize): Create frame_unwinders list.
1444 (pspy_get_frame_unwinders): New function.
1445 (pspy_set_frame_unwinders): Ditto.
1446 (pspy_getset): Add frame_unwinders attribute to gdb.Progspace.
1447 * python/py-unwind.c: New file.
1448 * python/python-internal.h (pspy_get_name_unwinders): New prototype.
1449 (objpy_get_frame_unwinders): New prototype.
1450 (gdbpy_initialize_unwind): New prototype.
1451 * python/python.c (gdbpy_apply_type_printers): Call
1452 gdbpy_initialize_unwind.
1454 2015-04-01 Pedro Alves <palves@redhat.com>
1456 * infrun.c (resume): Check currently_stepping after clearing
1457 stepped_breakpoint, not before.
1459 2015-04-01 Pedro Alves <palves@redhat.com>
1461 * infrun.c (print_target_wait_results): Print all the ptid
1464 2015-04-01 Pedro Alves <palves@redhat.com>
1466 * infrun.c (keep_going): Also discard cleanups if inserting
1469 2015-04-01 Pedro Alves <palves@redhat.com>
1471 * infrun.c (wait_for_inferior): Install the
1472 finish_thread_state_cleanup cleanup across the whole function, not
1473 just around handle_inferior_event.
1475 2015-04-01 Pedro Alves <palves@redhat.com>
1477 * infrun.c (resume) <step past permanent breakpoint>: Use
1480 2015-04-01 Pedro Alves <palves@redhat.com>
1482 * linux-nat.c (linux_handle_extended_wait): Always call set_running.
1484 2015-04-01 Pierre-Marie de Rodat <derodat@adacore.com>
1486 * MAINTAINERS (Write After Approval): Add "Pierre-Marie de Rodat".
1488 2015-04-01 Pedro Alves <palves@redhat.com>
1490 * linux-thread-db.c (record_thread): Readd the thread to gdb's
1491 list if it was marked exited.
1493 2015-04-01 H.J. Lu <hongjiu.lu@intel.com>
1495 * configure: Regenerated.
1497 2015-03-31 Sergio Durigan Junior <sergiodj@redhat.com>
1498 Jan Kratochvil <jan.kratochvil@redhat.com>
1499 Oleg Nesterov <oleg@redhat.com>
1502 * linux-tdep.c: Include 'gdbcmd.h' and 'gdb_regex.h'.
1503 New enum identifying the various options of the coredump_filter
1505 (struct smaps_vmflags): New struct.
1506 (use_coredump_filter): New variable.
1507 (decode_vmflags): New function.
1508 (mapping_is_anonymous_p): Likewise.
1509 (dump_mapping_p): Likewise.
1510 (linux_find_memory_regions_full): New variables
1511 'coredumpfilter_name', 'coredumpfilterdata', 'pid', 'filterflags'.
1512 Removed variable 'modified'. Read /proc/<PID>/smaps file; improve
1513 parsing of its information. Implement memory mapping filtering
1514 based on its contents.
1515 (show_use_coredump_filter): New function.
1516 (_initialize_linux_tdep): New command 'set use-coredump-filter'.
1517 * NEWS: Mention the possibility of using the
1518 '/proc/PID/coredump_filter' file when generating a corefile.
1519 Mention new command 'set use-coredump-filter'.
1521 2015-03-31 Sergio Durigan Junior <sergiodj@redhat.com>
1523 * solib-svr4.c (solib_svr4_r_ldsomap): Catch possible exception by
1524 read_memory_unsigned_integer.
1526 2015-03-31 H.J. Lu <hongjiu.lu@intel.com>
1528 * Makefile.in (ZLIB): New.
1529 (ZLIBINC): Likewise.
1530 (INTERNAL_CFLAGS_BASE): Add $(ZLIBINC).
1531 (CLIBS): Add $(ZLIB).
1532 * acinclude.m4: (GDB_AC_CHECK_BFD): Add $zlibdir to LDFLAGS.
1534 * gdb_bfd.c: Don't check HAVE_ZLIB_H to include <zlib.h>.
1535 * top.c (print_gdb_configuration): Remove --with-zlib and
1537 * config.in: Regenerated.
1538 * configure: Likewise.
1540 2015-03-31 Antoine Tremblay <antoine.tremblay@ericsson.com>
1542 * NEWS: Mention info os cpus support.
1543 * gdb/nat/linux-osdata.c (linux_xfer_osdata_cpus): New function.
1544 (struct osdata_type): Add cpus entry, reorder the entries in
1547 2015-03-31 Matthias Klose <doko@ubuntu.com>
1549 * compile/compile.c (compile_to_object): Allow triplets with or
1552 2015-03-30 Doug Evans <dje@google.com>
1555 * cp-namespace.c (cp_search_static_and_baseclasses): Always look for
1556 klass in VAR_DOMAIN.
1558 2015-03-30 Gary Benson <gbenson@redhat.com>
1560 * remote.c (remote_mourn_1): Remove function. Update all callers
1561 to use remote_mourn.
1562 (extended_remote_mourn_1): Remove function. Update all callers
1563 to use extended_remote_mourn.
1564 (extended_remote_attach_1): Remove function. Update all callers
1565 to use extended_remote_attach.
1567 2015-03-28 James Bowman <james.bowman@ftdichip.com>
1569 * Makefile.in (ALL_TARGET_OBS): Add ft32-tdep.o.
1570 (HFILES_NO_SRCDIR): Add ft32-tdep.h.
1571 (ALLDEPFILES): Add ft32-tdep.c.
1572 * configure.tgt: Add FT32 entry.
1573 * ft32-tdep.c: New file, FT32 target-dependent code.
1574 * ft32-tdep.h: New file, FT32 target-dependent code.
1576 2015-03-27 Jan Kratochvil <jan.kratochvil@redhat.com>
1579 2015-03-26 Jan Kratochvil <jan.kratochvil@redhat.com>
1581 * printcmd.c (print_command_1): Move expr variable scope.
1583 2015-03-27 Joel Brobecker <brobecker@adacore.com>
1585 * dtrace-probe.c (dtrace_process_dof_probe): Initialize expr to NULL.
1587 2015-03-27 Andrzej Kaczmarek <andrzej.kaczmarek@tieto.com>
1589 * gdb_bfd.c (gdb_bfd_section_index): Fix off-by-one for special
1592 2015-03-26 Joel Brobecker <brobecker@adacore.com>
1594 * dtrace-probe.c (dtrace_process_dof_probe): Contain any
1595 exception raised while parsing the probe arguments.
1596 Force parsing to be done using the C language parser.
1597 * expression.h (parse_expression_with_language): Declare.
1598 * parse.c (parse_expression_with_language): New function.
1600 2015-03-26 Jon Turney <jon.turney@dronecode.org.uk>
1602 * MAINTAINERS (Write After Approval): Add "Jon Turney".
1604 2015-03-26 Andy Wingo <wingo@igalia.com>
1607 * dwarf2read.c (struct partial_die_info): Add has_const_value
1609 (add_partial_symbol): Don't punt on symbols that have const_value
1611 (read_partial_die): Detect DW_AT_const_value.
1613 2015-03-26 Jan Kratochvil <jan.kratochvil@redhat.com>
1616 * printcmd.c (print_command_1): Move expr variable scope.
1618 2015-03-26 Jan Kratochvil <jan.kratochvil@redhat.com>
1621 * printcmd.c (validate_format): Make the parameter cmdname const.
1623 2015-03-26 Don Breazeal <donb@codesourcery.com>
1625 * remote.c (_initialize_remote): Update comment.
1627 2015-03-26 Pedro Alves <palves@redhat.com>
1628 Jon TURNEY <jon.turney@dronecode.org.uk>
1630 * coffread.c (coff_symfile_read): When constructing the name of an
1631 import stub symbol from import symbol for amd64, only skip the
1632 char after _imp_ if the target is underscored (like i386) and the
1633 char is indeed the target's leading char.
1635 2015-03-25 Pedro Alves <palves@redhat.com>
1637 * target.h <to_async>: Replace 'callback' and 'context' parameters
1638 with boolean 'enable' parameter.
1639 (target_async): Replace CALLBACK and CONTEXT parameters with
1640 boolean ENABLE parameter.
1641 * inf-loop.c (inferior_event_handler): Adjust.
1642 * linux-nat.c (linux_nat_attach, linux_nat_resume)
1643 (linux_nat_resume): Adjust.
1644 (async_client_callback, async_client_context): Delete.
1645 (handle_target_event): Call inferior_event_handler directly.
1646 (linux_nat_async): Replace 'callback' and 'context' parameters
1647 with boolean 'enable' parameter. Adjust. Remove references to
1648 async_client_callback and async_client_context.
1649 (linux_nat_close): Adjust.
1650 * record-btrace.c (record_btrace_async): Replace 'callback' and
1651 'context' parameters with boolean 'enable' parameter. Adjust.
1652 (record_btrace_resume): Adjust.
1653 * record-full.c (record_full_async): Replace 'callback' and
1654 'context' parameters with boolean 'enable' parameter. Adjust.
1655 (record_full_resume, record_full_core_resume): Adjust.
1656 * remote.c (struct remote_state) <async_client_callback,
1657 async_client_context>: Delete fields.
1658 (remote_start_remote, extended_remote_attach_1, remote_resume)
1659 (extended_remote_create_inferior): Adjust.
1660 (remote_async_serial_handler): Call inferior_event_handler
1662 (remote_async): Replace 'callback' and 'context' parameters with
1663 boolean 'enable' parameter. Adjust.
1664 * top.c (gdb_readline_wrapper_cleanup, gdb_readline_wrapper):
1666 * target-delegates.c: Regenerate.
1668 2015-03-25 Gary Benson <gbenson@redhat.com>
1669 Pedro Alves <palves@redhat.com>
1671 * target.c (fileio_ft_t): New typedef, define object vector.
1672 (fileio_fhandles): New static variable.
1673 (is_closed_fileio_fh): New macro.
1674 (lowest_closed_fd): New static variable.
1675 (acquire_fileio_fd): New function.
1676 (release_fileio_fd): Likewise.
1677 (fileio_fd_to_fh): New macro.
1678 (target_fileio_open): Wrap the file descriptor on success.
1679 (target_fileio_pwrite): Updated to use wrapped file descriptor.
1680 (target_fileio_pread): Likewise.
1681 (target_fileio_close): Likewise.
1683 2015-03-24 Pedro Alves <palves@redhat.com>
1685 * thread.c (thread_apply_all_command): Take exited threads into
1688 2015-03-24 Pedro Alves <palves@redhat.com>
1690 * infrun.c (resume, proceed): Mention
1691 switch_back_to_stepped_thread, not switch_back_to_stepping.
1693 2015-03-24 Pedro Alves <palves@redhat.com>
1695 * infrun.c (user_visible_resume_ptid): Rewrite going from
1696 most-locked to unlocked instead of the opposite. Move comment ...
1697 * infrun.h (user_visible_resume_ptid): ... here.
1699 2015-03-24 Pedro Alves <palves@redhat.com>
1701 * linux-nat.c (linux_nat_resume): Output debug logs before trying
1702 to resume the event lwp. Use the lwp's ptid instead of the passed
1703 in (maybe wildcard) ptid.
1704 (stop_wait_callback): Tweak debug log output.
1705 (check_stopped_by_breakpoint): Tweak debug log output. Also dump
1707 (linux_nat_filter_event): In debug output, distinguish a
1708 resume_stop SIGSTOP from a delayed SIGSTOP. Output debug logs
1709 before trying to resume the lwp.
1711 2015-03-24 Joel Brobecker <brobecker@adacore.com>
1713 * gdbtypes.h (struct dynamic_prop_list) <prop>: Remove
1714 pointer indirection.
1715 * gdbtypes.c (get_dyn_prop): Adjust, following change above.
1716 (add_dyn_prop, copy_dynamic_prop_list): Likewise.
1718 2015-03-24 Joel Brobecker <brobecker@adacore.com>
1720 * gdbtypes.h (enum dynamic_prop_node_kind) <DYN_PROP_DATA_LOCATION>:
1721 Renames DYN_ATTR_DATA_LOCATION.
1722 (TYPE_DATA_LOCATION): Use DYN_PROP_DATA_LOCATION instead of
1723 DYN_ATTR_DATA_LOCATION.
1724 * dwarf2read.c (set_die_type): Use DYN_PROP_DATA_LOCATION
1725 instead of DYN_ATTR_DATA_LOCATION.
1727 2015-03-24 Pedro Alves <palves@redhat.com>
1729 * breakpoint.c (until_break_command): Adjust call to proceed.
1730 * gdbthread.h (struct thread_control_state) <stepping_command>:
1732 * infcall.c (run_inferior_call): Adjust call to proceed.
1733 * infcmd.c (run_command_1, proceed_thread_callback, continue_1):
1734 Adjust calls to proceed.
1735 (set_step_frame): Set the current thread's step_start_function
1737 (step_once): Adjust calls to proceed.
1738 (jump_command, signal_command, until_next_command)
1739 (finish_backward, finish_forward, proceed_after_attach_callback)
1740 (attach_command_post_wait): Adjust calls to proceed.
1741 * infrun.c (proceed_after_vfork_done): Adjust call to proceed.
1742 (do_target_resume): New function, factored out from ...
1743 (resume): ... here. Remove 'step' parameter. Instead, check
1744 currently_stepping to determine whether the thread should be
1746 (proceed): Remove 'step' parameter and don't set the thread's
1747 step_start_function here. Adjust call to 'resume'.
1748 (handle_inferior_event): Adjust calls to 'resume'.
1749 (switch_back_to_stepped_thread): Use do_target_resume instead of
1751 (keep_going): Adjust calls to 'resume'.
1752 * infrun.h (proceed): Remove 'step' parameter.
1754 * windows-nat.c (do_initial_windows_stuff): Adjust call to
1756 * mi/mi-main.c (proceed_thread): Adjust call to 'proceed'.
1758 2015-03-24 Pedro Alves <palves@redhat.com>
1760 * gdbthread.h (struct thread_control_state) <stepping_command>:
1762 * infcmd.c (step_once): Pass step=1 to clear_proceed_status. Set
1763 the thread's stepping_command field.
1764 * infrun.c (resume): Check the thread's stepping_command flag to
1765 determine which threads should be resumed. Rename 'entry_step'
1767 (clear_proceed_status_thread): Clear 'stepping_command'.
1768 (schedlock_applies): Change parameter type to struct thread_info
1770 (find_thread_needs_step_over): Remove 'step' parameter. Adjust.
1771 (switch_back_to_stepped_thread): Adjust calls to
1772 'schedlock_applies'.
1773 (_initialize_infrun): Adjust "set scheduler-locking step" help.
1775 2015-03-24 Pedro Alves <palves@redhat.com>
1777 * infrun.c (step_start_function): Delete and ...
1778 * gdbthread.h (struct thread_control_state) <step_start_function>:
1779 ... now a field here.
1780 * infrun.c (clear_proceed_status_thread): Clear the thread's
1781 step_start_function.
1782 (proceed, process_event_stop_test, print_stop_event): Adjust.
1784 2015-03-24 Pedro Alves <palves@redhat.com>
1786 * infrun.c (proceed): No longer handle negative step.
1788 2015-03-24 Gary Benson <gbenson@redhat.com>
1790 * nat/x86-linux.h (x86_linux_new_thread): New declaration.
1791 (x86_linux_prepare_to_resume): Likewise.
1792 * x86-linux-nat.c (x86_linux_new_thread):
1793 Moved to nat/x86-linux.c.
1794 (x86_linux_prepare_to_resume): Likewise.
1795 * nat/x86-linux.c (x86_linux_new_thread): New function.
1796 (x86_linux_prepare_to_resume): Likewise.
1798 2015-03-24 Gary Benson <gbenson@redhat.com>
1800 * nat/x86-linux-dregs.h: New file.
1801 * nat/x86-linux-dregs.c: Likewise.
1802 * Makefile.in (HFILES_NO_SRCDIR): Add nat/x86-linux-dregs.h.
1803 (x86-linux-dregs.o): New rule.
1804 * config/i386/linux.mh (NATDEPFILES): Add x86-linux-dregs.o.
1805 * config/i386/linux64.mh (NATDEPFILES): Likewise.
1806 * x86-linux-nat.c: Include nat/x86-linux-dregs.h.
1807 (u_debugreg_offset): Moved to nat/x86-linux-dregs.c.
1808 (x86_linux_dr_get): Likewise.
1809 (x86_linux_dr_set): Likewise.
1810 (x86_linux_dr_get_addr): Likewise.
1811 (x86_linux_dr_get_control): Likewise.
1812 (x86_linux_dr_get_status): Likewise.
1813 (update_debug_registers_callback): Likewise.
1814 (x86_linux_dr_set_control): Likewise.
1815 (x86_linux_dr_set_addr): Likewise.
1816 (x86_linux_update_debug_registers): Likewise.
1818 2015-03-24 Gary Benson <gbenson@redhat.com>
1820 * x86-linux-nat.c (x86_linux_update_debug_registers):
1821 New function, factored out from...
1822 (x86_linux_prepare_to_resume): ...this.
1824 2015-03-24 Gary Benson <gbenson@redhat.com>
1826 * x86-linux-nat.c (x86_linux_dr_get): Update comments.
1827 (x86_linux_dr_set): Likewise.
1828 (x86_linux_dr_get_addr): Likewise.
1829 (x86_linux_dr_get_control): Likewise.
1830 (x86_linux_dr_get_status): Likewise.
1831 (update_debug_registers_callback): Likewise.
1832 (x86_linux_dr_set_control): Likewise.
1833 (x86_linux_dr_set_addr): Likewise.
1834 (x86_linux_prepare_to_resume): Likewise.
1835 (x86_linux_new_thread): Likewise.
1837 2015-03-24 Gary Benson <gbenson@redhat.com>
1839 * x86-linux-nat.c (x86_linux_dr_set_addr): Update assertion.
1840 (x86_linux_new_thread): Rename argument.
1842 2015-03-24 Gary Benson <gbenson@redhat.com>
1844 * nat/x86-linux.h: New file.
1845 * nat/x86-linux.c: Likewise.
1846 * Makefile.in (HFILES_NO_SRCDIR): Add nat/x86-linux.h.
1847 (x86-linux.o): New rule.
1848 * config/i386/linux.mh (NATDEPFILES): Add x86-linux.o.
1849 * config/i386/linux64.mh (NATDEPFILES): Likewise.
1850 * nat/linux-nat.h (struct arch_lwp_info): New forward declaration.
1851 (lwp_set_arch_private_info): New declaration.
1852 (lwp_arch_private_info): Likewise.
1853 * linux-nat.c (lwp_set_arch_private_info): New function.
1854 (lwp_arch_private_info): Likewise.
1855 * x86-linux-nat.c: Include nat/x86-linux.h.
1856 (arch_lwp_info): Removed structure.
1857 (update_debug_registers_callback):
1858 Use lwp_set_debug_registers_changed.
1859 (x86_linux_prepare_to_resume): Use lwp_debug_registers_changed
1860 and lwp_set_debug_registers_changed.
1861 (x86_linux_new_thread): Use lwp_set_debug_registers_changed.
1863 2015-03-24 Gary Benson <gbenson@redhat.com>
1865 * nat/linux-nat.h (ptid_of_lwp): New declaration.
1866 (lwp_is_stopped): Likewise.
1867 (lwp_stop_reason): Likewise.
1868 * linux-nat.c (ptid_of_lwp): New function.
1869 (lwp_is_stopped): Likewise.
1870 (lwp_is_stopped_by_watchpoint): Likewise.
1871 * x86-linux-nat.c (update_debug_registers_callback):
1873 (x86_linux_prepare_to_resume): Use ptid_of_lwp and
1876 2015-03-24 Gary Benson <gbenson@redhat.com>
1878 * linux-nat.h (linux_stop_lwp): Move declaration to...
1879 * nat/linux-nat.h (linux_stop_lwp): New declaration.
1881 2015-03-24 Gary Benson <gbenson@redhat.com>
1883 * linux-nat.h: Include nat/linux-nat.h.
1884 (iterate_over_lwps): Move declaration to nat/linux-nat.h.
1885 * nat/linux-nat.h (struct lwp_info): New forward declaration.
1886 (iterate_over_lwps_ftype): New typedef.
1887 (iterate_over_lwps): New declaration.
1888 * linux-nat.h (iterate_over_lwps): Update comment. Use
1889 iterate_over_lwps_ftype. Update callback return value check.
1891 2015-03-24 Gary Benson <gbenson@redhat.com>
1893 * x86-nat.h (x86_debug_reg_state): Move declaration to...
1894 * nat/x86-dregs.h (x86_debug_reg_state): New declaration.
1896 2015-03-24 Gary Benson <gbenson@redhat.com>
1898 * nat/linux-nat.h (current_lwp_ptid): New declaration.
1899 * linux-nat.c (current_lwp_ptid): New function.
1900 * x86-linux-nat.c: Include nat/linux-nat.h.
1901 (x86_linux_dr_get_addr): Use current_lwp_ptid.
1902 (x86_linux_dr_get_control): Likewise.
1903 (x86_linux_dr_get_status): Likewise.
1904 (x86_linux_dr_set_control): Likewise.
1905 (x86_linux_dr_set_addr): Likewise.
1907 2015-03-24 Antoine Tremblay <antoine.tremblay@ericsson.com>
1909 PR breakpoints/16466
1910 * breakpoint.c (create_breakpoint): Set thread on breakpoint struct.
1912 2015-03-23 Joel Brobecker <brobecker@adacore.com>
1914 * ser-mingw.c (ser_windows_setparity): Fix indentation.
1915 * ser-unix.c (hardwire_setparity): Likewise.
1917 2015-03-23 Yurij Grechishhev <yurij.grechishhev@gmail.com>
1919 * NEWS: Mention set/show serial parity command.
1920 * monitor.c (monitor_open): Call serial_setparity.
1921 * remote.c (remote_open_1): Likewise.
1922 * ser-base.c (ser_base_serparity): New function.
1923 * ser-base.h (ser_base_setparity): Add declaration.
1924 * ser-go32.c (dos_ops): Set "setparity" field.
1925 * ser-mingw.c (ser_windows_raw): Do not set state.fParity and
1927 (ser_windows_setparity): New function.
1928 (hardwire_ops): Add ser_windows_setparity.
1929 (tty_ops): Add NULL for setparity field.
1930 (pipe_ops): Add ser_base_setparity.
1931 (tcp_ops): Likewise.
1932 * ser-pipe.c (pipe_ops): Likewise.
1933 * ser-tcp.c (tcp_ops): Likewise.
1934 * ser-unix.c (hardwire_setparity): Add declaration.
1935 (hardwire_raw): Don't reset PARENB flag.
1936 (hardwire_setparity): New function.
1937 (hardwire_ops): Add hardwire_setparity.
1938 * serial.c (serial_setparity): New function.
1939 (serial_parity): New global.
1940 (parity_none, parity_odd, parity_even, parity_enums, parity):
1942 (set_parity): New function.
1943 (_initialize_serial): Add set/show serial parity commands.
1944 * serial.h (GDBPARITY_NONE): Define.
1945 (GDBPARITY_ODD): Define.
1946 (GDBPARITY_EVEN): Define.
1947 (serial_setparity) Add declaration.
1948 (struct serial_ops): Add setparity field.
1949 * target.h (serial_parity): Add declaration.
1951 2015-03-23 Keith Seitz <keiths@redhat.com>
1953 * linespec.c (linespec_lexer_lex_keyword): Update comment.
1955 2015-03-23 Keith Seitz <keiths@redhat.com>
1957 * breakpoint.c (parse_breakpoint_sals): Use
1958 linespec_lexer_lex_keyword to ascertain if the user specified
1960 * linespec.c [IF_KEYWORD_INDEX]: Define.
1961 (linespec_lexer_lex_keyword): Export.
1962 (struct ls_parser) <keyword_ok>: Remove.
1963 A keyword is only a keyword if not followed by another keyword.
1964 (linespec_lexer_lex_one): Remove keyword_ok handling.
1965 Add comment explaining why the parsing stream is not advanced
1966 when a keyword is seen.
1967 (parse_linespec): Remove parser->keyword_ok.
1968 * linespec.h (linespec_lexer_lex_keyword): Add declaration.
1970 2015-03-23 Keith Seitz <keiths@redhat.com>
1973 * dwarf2read.c (dwarf2_add_member_fn): Issue a complaint
1974 if we find a static method with DW_AT_vtable_elem_location.
1976 2015-03-21 Eli Zaretskii <eliz@gnu.org>
1978 * tui/tui-io.c (tui_expand_tabs): Reinitialize the column counter
1979 before the second loop, to avoid undefined behavior. Reported by
1980 Anton Blanchard <anton@samba.org>.
1982 2015-03-20 Keven Boell <keven.boell@intel.com>
1984 * gdbtypes.c (resolve_dynamic_type_internal): Adapt
1985 data_location usage to linked list.
1986 (resolve_dynamic_type_internal): Adapt data_location to
1988 (get_dyn_prop, add_dyn_prop, copy_dynamic_prop_list): New function.
1989 (copy_type_recursive, copy_type): Add copy of linked list.
1990 * gdbtypes.h (enum dynamic_prop_node_kind): New enum.
1991 (struct dynamic_prop_list): New struct.
1992 * dwarf2read.c (set_die_type): Set data_location data.
1994 2015-03-20 Pedro Alves <palves@redhat.com>
1996 * i386-sol2-tdep.c (i386_sol2_static_transform_name): Move "p" to
1997 inner block and make it const.
1998 * machoread.c (get_archive_prefix_len): Make "lparen" const.
2000 2015-03-20 Pedro Alves <palves@redhat.com>
2002 * breakpoint.c (set_breakpoint_condition): Make argument "exp" const.
2003 * breakpoint.h (set_breakpoint_condition): Update declaration.
2005 2015-03-20 Pedro Alves <palves@redhat.com>
2007 * tui/tui-io.c (tui_expand_tabs): Make "s1" const.
2009 2015-03-20 Pedro Alves <palves@redhat.com>
2011 * xcoffread.c (scan_xcoff_symtab): Make "p" and "q" const.
2013 2015-03-20 Pedro Alves <palves@redhat.com>
2015 * remote-m32r-sdi.c (m32r_open): Make "port_str" const.
2017 2015-03-20 Pedro Alves <palves@redhat.com>
2019 * nto-tdep.c (nto_find_and_open_solib): Make "endian" const.
2020 (nto_init_solib_absolute_prefix): Likewise.
2022 2015-03-20 Pedro Alves <palves@redhat.com>
2024 * sparc-sol2-tdep.c (sparc_sol2_static_transform_name): Make "p" const.
2025 * spu-tdep.c (spu_gdbarch_init): Make "name" const.
2027 2015-03-20 Jan Kratochvil <jan.kratochvil@redhat.com>
2029 * config/djgpp/README: Remove gdb.hp.
2031 2015-03-20 Yao Qi <yao.qi@linaro.org>
2033 * aarch64-tdep.c (aarch64_gdbarch_init): Don't call
2034 set_gdbarch_cannot_step_breakpoint.
2036 2015-03-19 Pedro Alves <palves@redhat.com>
2038 * linux-nat.c (linux_resume_one_lwp): Rename to ...
2039 (linux_resume_one_lwp_throw): ... this. Don't handle ESRCH here,
2040 instead call perror_with_name.
2041 (check_ptrace_stopped_lwp_gone): New function.
2042 (linux_resume_one_lwp): Reimplement as wrapper around
2043 linux_resume_one_lwp_throw that swallows errors if the LWP is
2045 (resume_stopped_resumed_lwps): Try register reads in TRY/CATCH and
2046 swallows errors if the LWP is gone. Use
2047 linux_resume_one_lwp_throw instead of linux_resume_one_lwp.
2049 2015-03-19 Pedro Alves <palves@redhat.com>
2051 * linux-nat.c (status_callback): Return early if the LWP has no
2054 2015-03-19 Pedro Alves <palves@redhat.com>
2056 * linux-nat.c (select_event_lwp_callback): Update comment to no
2057 longer mention SIGTRAP.
2059 2015-03-18 Tristan Gingold <gingold@adacore.com>
2061 * amd64-windows-tdep.c (amd64_windows_find_unwind_info): Move
2062 redirection code to ...
2063 (amd64_windows_frame_decode_insns): ... Here. Fix in prologue
2064 checks. Fix SAVE_NONVOL operations. Add debug code and comments.
2066 2015-03-18 Gary Benson <gbenson@redhat.com>
2068 (remote_protocol_features): Remove the "vFile:fstat" feature.
2069 (remote_hostio_fstat): Probe for "vFile:fstat" support.
2071 2015-03-11 Yao Qi <yao.qi@linaro.org>
2074 * aarch64-linux-tdep.c: Include xml-syscall.h
2075 (aarch64_linux_get_syscall_number): New function.
2076 (aarch64_linux_init_abi): Call
2077 set_gdbarch_get_syscall_number.
2078 * syscalls/aarch64-linux.xml: New file.
2080 2015-03-17 Yurij Grechishhev <yurij.grechishhev@gmail.com>
2082 * ser-base.h (ser_base_setstopbits): Change second argument name
2083 from "rate" to "num".
2085 2015-03-17 Gary Benson <gbenson@redhat.com>
2086 Luke Allardyce <lukeallardyce@gmail.com>
2089 * common/common-remote-fileio.h (sys/stat.h): New include.
2090 (stuct stat): Remove forward declaration.
2092 2015-03-16 John Baldwin <jhb@FreeBSD.org>
2094 * fbsd-tdep.c (fbsd_make_corefile_notes): Fetch all target registers
2095 before writing core register notes.
2097 2015-03-16 Yuanhui Zhang <asmwarrior@gmail.com>
2098 Pedro Alves <palves@redhat.com>
2100 * gdb_curses.h (tgetnum): Mark with EXTERN_C.
2101 * stub-termcap.c (tgetent, tgetnum, tgetflag, tgetstr, tputs)
2102 (tgoto): Wrap with extern "C".
2104 2015-03-16 Pedro Alves <palves@redhat.com>
2105 Yuanhui Zhang <asmwarrior@gmail.com>
2107 * stub-termcap.c (tputs): Change prototype.
2109 2015-03-16 Yuanhui Zhang <asmwarrior@gmail.com>
2110 Pedro Alves <palves@redhat.com>
2112 * windows-nat.c (struct thread_info_struct): Rename to ...
2113 (struct windows_thread_info_struct): ... this.
2114 (thread_info): Rename to ...
2115 (windows_thread_info): ... this.
2118 2015-03-14 Jan Kratochvil <jan.kratochvil@redhat.com>
2119 Pedro Alves <palves@redhat.com>
2121 * NEWS: New Removed targets and native configurations.
2123 2015-03-13 Jan Kratochvil <jan.kratochvil@redhat.com>
2126 * Makefile.in (ALL_64_TARGET_OBS): Remove ia64-hpux-tdep.o.
2127 (ALL_TARGET_OBS): Remove hppa-hpux-tdep.o, solib-som.o and solib-pa64.o.
2128 (HFILES_NO_SRCDIR): Remove solib-som.h, inf-ttrace.h, solib-pa64.h and
2129 ia64-hpux-tdep.h, solib-ia64-hpux.h.
2130 (ALLDEPFILES): Remove hppa-hpux-tdep.c, hppa-hpux-nat.c,
2131 ia64-hpux-nat.c, ia64-hpux-tdep.c, somread.c and solib-som.c.
2132 * config/djgpp/fnchange.lst: Remove hppa-hpux-nat.c and
2134 * config/ia64/hpux.mh: Remove file.
2135 * config/pa/hpux.mh: Remove file.
2136 * configure: Rebuilt.
2137 * configure.ac (dlgetmodinfo, somread.o): Remove.
2138 * configure.host (hppa*-*-hpux*, ia64-*-hpux*): Make them obsolete.
2139 (ia64-*-hpux*): Remove its float format exception.
2140 * configure.tgt (hppa*-*-hpux*, ia64-*-hpux*): Make them obsolete.
2141 * hppa-hpux-nat.c: Remove file.
2142 * hppa-hpux-tdep.c: Remove file.
2143 * hppa-tdep.c (struct hppa_unwind_info, struct hppa_objfile_private):
2144 Move them here from hppa-tdep.h
2145 (hppa_objfile_priv_data, hppa_init_objfile_priv_data): Make it static.
2146 (hppa_frame_prev_register_helper): Remove HPPA_FLAGS_REGNUM exception.
2147 * hppa-tdep.h (struct hppa_unwind_info, struct hppa_objfile_private):
2148 Move them to hppa-tdep.c.
2149 (hppa_objfile_priv_data, hppa_init_objfile_priv_data): Remove
2151 * ia64-hpux-nat.c: Remove file.
2152 * ia64-hpux-tdep.c: Remove file.
2153 * ia64-hpux-tdep.h: Remove file.
2154 * inf-ttrace.c: Remove file.
2155 * inf-ttrace.h: Remove file.
2156 * solib-ia64-hpux.c: Remove file.
2157 * solib-ia64-hpux.h: Remove file.
2158 * solib-pa64.c: Remove file.
2159 * solib-pa64.h: Remove file.
2160 * solib-som.c: Remove file.
2161 * solib-som.h: Remove file.
2162 * somread.c: Remove file.
2164 2015-03-13 John Baldwin <jhb@FreeBSD.org>
2166 * configure.ac: AC_SEARCH_LIBS(kinfo_getvmmap, util).
2167 * config.in: Regenerate.
2168 * configure: Regenerate.
2169 * fbsd-nat.c [!HAVE_KINFO_GETVMMAP] (fbsd_read_mapping): Don't
2171 (fbsd_find_memory_regions): Use kinfo_getvmmap to
2172 enumerate memory regions if present.
2174 2015-03-13 John Baldwin <jhb@FreeBSD.org>
2176 * amd64fbsd-tdep.c (amd64fbsd_sigtramp_p): Style fixes.
2177 * i386fbsd-tdep.c: Fix style in various gdb_static_assert
2179 (i386fbsd_sigtramp_p): Likewise.
2181 2015-03-12 John Baldwin <jhb@FreeBSD.org>
2183 * MAINTAINERS (Write After Approval): Add John Baldwin.
2185 2015-03-12 Gary Benson <gbenson@redhat.com>
2187 * solib.c (_initialize_solib): Make "set/show sysroot" use
2188 add_setshow_optional_filename_cmd so it can be restored to
2189 empty after being set.
2191 2015-03-11 Sergio Durigan Junior <sergiodj@redhat.com>
2193 * Makefile.in (SFILES): New source break-catch-syscall.c.
2194 (COMMON_OBS): New object break-catch-syscall.o.
2195 * break-catch-syscall.c: New file.
2196 * breakpoint.c: Remove inclusion of "xml-syscall.h".
2197 (syscall_catchpoint_p): Move declaration to break-catch-syscall.c
2198 (struct syscall_catchpoint): Likewise.
2199 (dtor_catch_syscall): Likewise.
2200 (catch_syscall_inferior_data): Likewise.
2201 (struct catch_syscall_inferior_data): Likewise.
2202 (get_catch_syscall_inferior_data): Likewise.
2203 (catch_syscall_inferior_data_cleanup): Likewise.
2204 (insert_catch_syscall): Likewise.
2205 (remove_catch_syscall): Likewise.
2206 (breakpoint_hit_catch_syscall): Likewise.
2207 (print_it_catch_syscall): Likewise.
2208 (print_one_catch_syscall): Likewise.
2209 (print_mention_catch_syscall): Likewise.
2210 (print_recreate_catch_syscall): Likewise.
2211 (catch_syscall_breakpoint_ops): Likewise.
2212 (syscall_catchpoint_p): Likewise.
2213 (create_syscall_event_catchpoint): Likewise.
2214 (catch_syscall_split_args): Likewise.
2215 (catch_syscall_command_1): Likewise.
2216 (is_syscall_catchpoint_enabled): Likewise.
2217 (catch_syscall_enabled): Likewise.
2218 (catching_syscall_number): Likewise.
2219 (catch_syscall_completer): Likewise.
2220 (clear_syscall_counts): Likewise.
2221 (initialize_breakpoint_ops): Move initialization of syscall
2222 catchpoints to break-catch-syscall.c.
2223 (_initialize_breakpoint): Move code related to syscall catchpoints
2224 to break-catch-syscall.c.
2226 2015-03-11 Sergio Durigan Junior <sergiodj@redhat.com>
2228 * breakpoint.c (breakpoint_find_if): New function.
2229 * breakpoint.h (breakpoint_find_if): New prototype.
2231 2015-03-11 Gary Benson <gbenson@redhat.com>
2233 * remote-fileio.h (remote_fileio_to_host_stat): New declaration.
2234 * remote-fileio.c (remote_fileio_to_host_uint): New function.
2235 (remote_fileio_to_host_ulong): Likewise.
2236 (remote_fileio_to_host_mode): Likewise.
2237 (remote_fileio_to_host_time): Likewise.
2238 (remote_fileio_to_host_stat): Likewise.
2239 * remote.c (PACKET_vFile_fstat): New enum value.
2240 (remote_protocol_features): Register the "vFile:fstat" feature.
2241 (remote_hostio_fstat): New function.
2242 (remote_bfd_iovec_stat): Use the above.
2243 (_initialize_remote): Register new "set/show remote
2244 hostio-fstat-packet" command.
2245 * symfile.c (separate_debug_file_exists): Update comment.
2246 * NEWS: Announce new vFile:fstat packet.
2248 2015-03-11 Gary Benson <gbenson@redhat.com>
2250 * common/common-remote-fileio.h: New file.
2251 * common/common-remote-fileio.c: Likewise.
2252 * Makefile.in (SFILES): Add common/common-remote-fileio.c.
2253 (HFILES_NO_SRCDIR): Add common/common-remote-fileio.h.
2254 (COMMON_OBS): Add common-remote-fileio.o.
2255 (common-remote-fileio.o): New rule.
2256 * remote-fileio.h (common-remote-fileio.h): New include.
2257 * remote-fileio.c (gdb/fileio.h): Do not include.
2258 (remote_fileio_to_be): Moved to common-remote-fileio.h.
2259 (remote_fileio_to_fio_uint): Likewise.
2260 (remote_fileio_to_fio_time): Likewise.
2261 (remote_fileio_mode_to_target): Moved to common-remote-fileio.c.
2262 (remote_fileio_to_fio_mode): Likewise.
2263 (remote_fileio_to_fio_ulong): Likewise.
2264 (remote_fileio_to_fio_stat): Likewise.
2266 2015-03-11 Andy Wingo <wingo@igalia.com>
2268 * guile/scm-value.c (gdbscm_value_dynamic_type): Fix typo in which
2269 we were checking the cached type, not the cached dynamic type.
2271 2015-03-11 Andy Wingo <wingo@igalia.com>
2273 * guile/scm-cmd.c (cmdscm_destroyer): Don't xfree the name and
2274 other strings, as these are on the GC'd heap, and will be
2275 collected along with the smob.
2277 2015-03-11 Andy Wingo <wingo@igalia.com>
2279 * guile/scm-objfile.c (gdbscm_objfile_progspace): New function.
2280 (objfile_functions): Bind gdbscm_objfile_progspace to
2282 * guile/lib/gdb.scm: Add objfile-progspace to exports.
2284 2015-03-11 Andy Wingo <wingo@igalia.com>
2286 * guile/guile.c (_initialize_guile): Disable automatic
2287 finalization, if Guile offers us that possibility.
2288 * guile/guile.c (call_initialize_gdb_module):
2289 * guile/scm-safe-call.c (gdbscm_with_catch): Arrange to run
2290 finalizers in appropriate places.
2291 * configure.ac (AC_TRY_LIBGUILE): Add a check for
2292 scm_set_automatic_finalization_enabled.
2293 * configure: Regenerated.
2295 2015-03-11 Andreas Arnez <arnez@linux.vnet.ibm.com>
2297 * s390-linux-tdep.c (s390_skip_prologue): Skip the prologue using
2300 2015-03-11 Andreas Arnez <arnez@linux.vnet.ibm.com>
2302 * s390-linux-nat.c (struct arch_lwp_info): New.
2303 (s390_fix_watch_points): Rename to...
2304 (s390_prepare_to_resume): ...this. Skip the PER info update
2305 unless the watch points have changed.
2306 (s390_refresh_per_info, s390_new_thread): New functions.
2307 (s390_insert_watchpoint): Call s390_refresh_per_info instead of
2308 s390_fix_watch_points.
2309 (s390_remove_watchpoint): Likewise.
2310 (_initialize_s390_nat): Reflect renaming of s390_fix_watch_points.
2311 Register s390_prepare_to_resume.
2313 2015-03-09 Pedro Alves <palves@redhat.com>
2316 2015-03-07 Pedro Alves <palves@redhat.com>
2317 * common/gdb_socket.h: New file.
2318 * ser-tcp.c: Include gdb_socket.h. Don't include netinet/in.h nor
2320 (net_open): Use union gdb_sockaddr_u.
2322 2015-03-07 Pedro Alves <palves@redhat.com>
2324 * configure.ac (build_warnings): Move -Wmissing-prototypes
2325 -Wdeclaration-after-statement -Wmissing-parameter-type
2326 -Wold-style-declaration -Wold-style-definition to the C-specific
2328 * configure: Regenerate.
2330 2015-03-07 Pedro Alves <palves@redhat.com>
2332 * common/gdb_socket.h: New file.
2333 * ser-tcp.c: Include gdb_socket.h. Don't include netinet/in.h nor
2335 (net_open): Use union gdb_sockaddr_u.
2337 2015-03-07 Pedro Alves <palves@redhat.com>
2339 * common/common-exceptions.c [!__cplusplus] (enum catcher_state)
2340 (exceptions_state_mc_action_iter)
2341 (exceptions_state_mc_action_iter_1, exceptions_state_mc_catch):
2343 [__cplusplus] (try_scope_depth): New global.
2344 [__cplusplus] (exception_try_scope_entry)
2345 (exception_try_scope_exit, gdb_exception_sliced_copy)
2346 (exception_rethrow): New functions.
2347 (throw_exception): In C++ mode, throw
2348 gdb_exception_RETURN_MASK_QUIT for RETURN_QUIT and
2349 gdb_exception_RETURN_MASK_ERROR for RETURN_ERROR.
2350 (throw_it): In C++ mode, use try_scope_depth.
2351 * common/common-exceptions.h [!__cplusplus]
2352 (exceptions_state_mc_action_iter)
2353 (exceptions_state_mc_action_iter_1, exceptions_state_mc_catch):
2355 [__cplusplus] (exception_try_scope_entry)
2356 (exception_try_scope_exit, exception_rethrow): Declare.
2357 [__cplusplus] (struct exception_try_scope): New struct.
2358 [__cplusplus] (TRY, CATCH, END_CATCH): Reimplement on top of real
2360 (struct gdb_exception_RETURN_MASK_ALL)
2361 (struct gdb_exception_RETURN_MASK_ERROR)
2362 (struct gdb_exception_RETURN_MASK_QUIT): New types.
2364 2015-03-07 Pedro Alves <palves@redhat.com>
2366 * main.c (handle_command_errors): Remove volatile qualifier from
2369 2015-03-07 Pedro Alves <palves@redhat.com>
2371 * breakpoint.c (save_breakpoints): Adjust to avoid code between
2373 * gdbtypes.c (safe_parse_type): Remove empty line.
2374 (types_deeply_equal):
2375 * guile/scm-frame.c (gdbscm_frame_name):
2376 * linux-thread-db.c (find_new_threads_once):
2377 * python/py-breakpoint.c (bppy_get_commands):
2378 * record-btrace.c (record_btrace_insert_breakpoint)
2379 (record_btrace_remove_breakpoint, record_btrace_start_replaying)
2380 (record_btrace_start_replaying): Adjust to avoid code between TRY
2383 2015-03-07 Pedro Alves <palves@redhat.com>
2385 * common/common-exceptions.c (struct catcher) <exception>: No
2386 longer a pointer to volatile exception. Now an exception value.
2387 <mask>: Delete field.
2388 (exceptions_state_mc_init): Remove all parameters. Adjust.
2389 (exceptions_state_mc): No longer pop the catcher here.
2390 (exceptions_state_mc_catch): New function.
2391 (throw_exception): Adjust.
2392 * common/common-exceptions.h (exceptions_state_mc_init): Remove
2394 (exceptions_state_mc_catch): Declare.
2395 (TRY_CATCH): Rename to ...
2396 (TRY): ... this. Remove EXCEPTION and MASK parameters.
2397 (CATCH, END_CATCH): New.
2398 All callers adjusted.
2400 2015-03-07 Tom Tromey <tromey@redhat.com>
2402 * top.c (quit_force): Inline and delete DO_TRY, DO_PRINT_EX.
2404 2015-03-07 Pedro Alves <palves@redhat.com>
2406 * amd64-tdep.c (amd64_frame_cache, amd64_sigtramp_frame_cache)
2407 (amd64_epilogue_frame_cache): Normal exception handling code.
2408 * break-catch-throw.c (check_status_exception_catchpoint)
2409 (re_set_exception_catchpoint): Ditto.
2410 * cli/cli-interp.c (safe_execute_command):
2411 * cli/cli-script.c (script_from_file): Ditto.
2412 * compile/compile-c-symbols.c (generate_c_for_for_one_variable):
2414 * compile/compile-object-run.c (compile_object_run): Ditto.
2415 * cp-abi.c (baseclass_offset): Ditto.
2416 * cp-valprint.c (cp_print_value): Ditto.
2417 * exceptions.c (catch_exceptions_with_msg):
2418 * frame-unwind.c (frame_unwind_try_unwinder): Ditto.
2419 * frame.c (get_frame_address_in_block_if_available): Ditto.
2420 * i386-tdep.c (i386_frame_cache, i386_epilogue_frame_cache)
2421 (i386_sigtramp_frame_cache): Ditto.
2422 * infcmd.c (post_create_inferior): Ditto.
2423 * linespec.c (parse_linespec, find_linespec_symbols):
2424 * p-valprint.c (pascal_object_print_value): Ditto.
2425 * parse.c (parse_expression_for_completion): Ditto.
2426 * python/py-finishbreakpoint.c (bpfinishpy_init): Ditto.
2427 * remote.c (remote_get_noisy_reply): Ditto.
2428 * s390-linux-tdep.c (s390_frame_unwind_cache): Ditto.
2429 * solib-svr4.c (solib_svr4_r_map): Ditto.
2431 2015-03-06 Gary Benson <gbenson@redhat.com>
2433 * common/common-utils.h (startswith): New inline function.
2434 All places where this logic was used updated to use the above.
2436 2015-03-05 Pedro Alves <palves@redhat.com>
2439 * mem-break.c (default_memory_insert_breakpoint): Set shadow_len
2440 after reading the breakpoint's shadow memory.
2442 2015-03-05 Mark Kettenis <kettenis@gnu.org>
2444 * hppabsd-nat.c: Remove file.
2445 * hppaobsd-nat.c: New file.
2446 * Makefile.in (ALLDEPFILES): Remove hppabsd-nat.c. Add
2448 * config/pa/obsd.mh (NATDEPFILES): Replace hppabsd-nat.o with
2451 2015-03-04 Pedro Alves <palves@redhat.com>
2453 * target.h (struct target_ops) <to_decr_pc_after_break>: Delete.
2454 (target_decr_pc_after_break): Delete declaration.
2455 * target.c (default_target_decr_pc_after_break)
2456 (target_decr_pc_after_break): Delete.
2457 * linux-nat.c (check_stopped_by_breakpoint, linux_nat_wait_1): Use
2458 gdbarch_decr_pc_after_break instead of target_decr_pc_after_break.
2459 * linux-thread-db.c (check_event): Likewise.
2460 * infrun.c (adjust_pc_after_break): Likewise.
2461 * darwin-nat.c (cancel_breakpoint): Likewise.
2462 * aix-thread.c (aix_thread_wait): Likewise.
2463 * target-delegates.c: Regenerate.
2465 2015-03-04 Pedro Alves <palves@redhat.com>
2467 * linux-nat.c (save_sigtrap): Check for breakpoints before
2468 checking watchpoints.
2469 (status_callback) [USE_SIGTRAP_SIGINFO]: Don't check whether a
2470 breakpoint is inserted if relying on SIGTRAP's siginfo.si_code.
2471 (check_stopped_by_breakpoint) [USE_SIGTRAP_SIGINFO]: Decide whether
2472 a breakpoint triggered based on the SIGTRAP's siginfo.si_code.
2473 (linux_nat_stopped_by_sw_breakpoint)
2474 (linux_nat_supports_stopped_by_sw_breakpoint)
2475 (linux_nat_stopped_by_hw_breakpoint)
2476 (linux_nat_supports_stopped_by_hw_breakpoint): New functions.
2477 (linux_nat_wait_1): Don't re-increment the PC if relying on
2478 SIGTRAP's siginfo->si_code.
2479 (linux_nat_add_target): Install new target methods.
2480 * linux-thread-db.c (check_event): Don't account for breakpoint PC
2481 offset if the target already adjusted the PC.
2482 * nat/linux-ptrace.h (USE_SIGTRAP_SIGINFO): New.
2483 (GDB_ARCH_TRAP_BRKPT): New.
2484 (TRAP_HWBKPT): Define if not already defined.
2486 2015-03-04 Pedro Alves <palves@redhat.com>
2488 * NEWS: Mention the new "swbreak" and "hwbreak" stop reasons.
2489 * remote.c (struct remote_state) <remote_stopped_by_watchpoint_p>:
2491 <stop_reason>: New field.
2492 (PACKET_swbreak_feature, PACKET_hwbreak_feature): New enum values.
2493 (packet_set_cmd_state): New function.
2494 (remote_protocol_features): Register the "swbreak" and "hwbreak"
2496 (remote_query_supported): If not disabled with the corresponding
2497 "set remote foo-packet" command, report support for the swbreak
2498 and hwbreak features.
2499 (struct stop_reply) <remote_stopped_by_watchpoint_p>: Delete
2501 <stop_reason>: New field.
2502 (remote_parse_stop_reply): Handle "swbreak" and "hwbreak".
2503 (remote_wait_as): Adjust.
2504 (remote_stopped_by_sw_breakpoint)
2505 (remote_supports_stopped_by_sw_breakpoint)
2506 (remote_stopped_by_hw_breakpoint)
2507 (remote_supports_stopped_by_hw_breakpoint): New functions.
2508 (remote_stopped_by_watchpoint): New function.
2509 (init_remote_ops): Install them.
2510 (_initialize_remote): Register new "set/show remote
2511 swbreak-feature-packet" and "set/show remote
2512 swbreak-feature-packet" commands.
2514 2015-03-04 Pedro Alves <palves@redhat.com>
2516 * btrace.h: Include target/waitstatus.h.
2517 (struct btrace_thread_info) <stop_reason>: New field.
2518 * record-btrace.c (record_btrace_step_thread): Use
2519 record_check_stopped_by_breakpoint instead of breakpoint_here_p.
2520 (record_btrace_decr_pc_after_break): Delete.
2521 (record_btrace_stopped_by_sw_breakpoint)
2522 (record_btrace_supports_stopped_by_sw_breakpoint)
2523 (record_btrace_stopped_by_hw_breakpoint)
2524 (record_btrace_supports_stopped_by_hw_breakpoint): New functions.
2525 (init_record_btrace_ops): Install them.
2526 * record-full.c (record_full_hw_watchpoint): Delete and replace
2528 (record_full_stop_reason): ... this throughout.
2529 (record_full_exec_insn): Adjust.
2530 (record_full_wait_1): Adjust. No longer re-increment the PC.
2531 (record_full_wait_1): Adjust. Use
2532 record_check_stopped_by_breakpoint instead of breakpoint_here_p.
2533 (record_full_stopped_by_watchpoint): Adjust.
2534 (record_full_stopped_by_sw_breakpoint)
2535 (record_full_supports_stopped_by_sw_breakpoint)
2536 (record_full_supports_stopped_by_sw_breakpoint)
2537 (record_full_stopped_by_hw_breakpoint)
2538 (record_full_supports_stopped_by_hw_breakpoint): New functions.
2539 (init_record_full_ops, init_record_full_core_ops): Install them.
2540 * record.c (record_check_stopped_by_breakpoint): New function.
2541 * record.h: Include target/waitstatus.h.
2542 (record_check_stopped_by_breakpoint): New declaration.
2544 2015-03-04 Pedro Alves <palves@redhat.com>
2546 enum lwp_stop_reason -> enum target_stop_reason
2547 * linux-nat.c (linux_resume_one_lwp, check_stopped_by_watchpoint)
2548 (linux_nat_stopped_by_watchpoint, status_callback)
2549 (linux_nat_wait_1): Adjust.
2550 * linux-nat.h (enum lwp_stop_reason): Delete.
2551 (struct lwp_info) <stop_reason>: Now an enum target_stop_reason.
2552 * x86-linux-nat.c (x86_linux_prepare_to_resume): Adjust.
2553 * target/waitstatus.h (enum target_stop_reason): New.
2555 2015-03-04 Pedro Alves <palves@redhat.com>
2557 * breakpoint.c (need_moribund_for_location_type): New function.
2558 (bpstat_stop_status): Don't skipping checking moribund locations
2559 of breakpoint types which the target tell caused a stop.
2560 (program_breakpoint_here_p): New function, factored out from ...
2561 (bp_loc_is_permanent): ... this.
2562 (update_global_location_list): Don't create a moribund location if
2563 the target supports reporting stops of the type of the removed
2565 * breakpoint.h (program_breakpoint_here_p): New declaration.
2566 * infrun.c (adjust_pc_after_break): Return early if the target has
2567 already adjusted the PC. Add comments.
2568 (handle_signal_stop): If nothing explains a signal, and the target
2569 tells us the stop was caused by a software breakpoint, check if
2570 there's a breakpoint instruction in the memory. If so, adjust the
2571 PC before presenting the stop to the user. Otherwise, ignore the
2572 trap. If nothing explains a signal, and the target tells us the
2573 stop was caused by a hardware breakpoint, ignore the trap.
2574 * target.h (struct target_ops) <to_stopped_by_sw_breakpoint,
2575 to_supports_stopped_by_sw_breakpoint, to_stopped_by_hw_breakpoint,
2576 to_supports_stopped_by_hw_breakpoint>: New fields.
2577 (target_stopped_by_sw_breakpoint)
2578 (target_supports_stopped_by_sw_breakpoint)
2579 (target_stopped_by_hw_breakpoint)
2580 (target_supports_stopped_by_hw_breakpoint): Define.
2581 * target-delegates.c: Regenerate.
2583 2015-03-04 Pedro Alves <palves@redhat.com>
2585 * infrun.c (follow_fork_inferior): Use the whole of the
2586 inferior_ptid and pending_follow.related_pid ptids instead of
2587 building ptids from the process components. Adjust verbose output
2588 to use target_pid_to_str.
2589 * linux-nat.c (linux_child_follow_fork): Use the whole of the
2590 inferior_ptid and pending_follow.related_pid ptids instead of
2591 building ptids from the process components.
2593 2015-03-04 Mark Kettenis <kettenis@gnu.org>
2595 * inf-ptrace.c [PT_GET_PROCESS_STATE]
2596 (inf_ptrace_insert_fork_catchpoint): New function.
2597 (inf_ptrace_remove_fork_catchpoint): New function.
2598 (inf_ptrace_target) [PT_GET_PROCESS_STATE]: Install them.
2600 2015-03-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
2602 * s390-linux-tdep.c (s390_register_name): Return empty string
2603 instead of NULL for registers that shouldn't be visible.
2605 2015-03-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
2607 * s390-linux-tdep.c (s390_gdbarch_init): Use the correct syscall
2608 XML file for 64-bit targets.
2610 2015-03-03 Simon Marchi <simon.marchi@ericsson.com>
2612 * target.h (find_default_create_inferior): Remove declaration.
2613 (find_default_attach): Likewise.
2615 2015-03-03 Pedro Alves <palves@redhat.com>
2617 * inf-ptrace.c (inf_ptrace_resume): Remove spurious whitespace.
2618 Use ptid_get_pid to get the overall process id when resuming all
2621 2015-03-03 Pedro Alves <palves@redhat.com>
2623 * i386-linux-nat.c (i386_linux_resume): Get the ptrace PID out of
2624 the lwp field of ptid. Pass the full ptid to get_thread_regcache.
2625 * inf-ptrace.c (get_ptrace_pid): New function.
2626 (inf_ptrace_resume): Use it.
2627 * linux-nat.c (linux_resume_one_lwp): Pass the LWP's ptid ummodified
2630 2015-03-03 Markus Metzger <markus.t.metzger@intel.com>
2632 * nat/linux-btrace.c: Include sys/utsname.h.
2633 (linux_determine_kernel_ptr_bits): New.
2634 (linux_enable_bts): Call linux_determine_kernel_ptr_bits.
2635 * x86-linux-nat.c (x86_linux_enable_btrace): Do not overwrite non-zero
2638 2015-03-03 Markus Metzger <markus.t.metzger@intel.com>
2640 * btrace.c (ftrace_update_function): Treat return as tailcall for
2641 "_dl_runtime_resolve".
2643 2015-03-03 Markus Metzger <markus.t.metzger@intel.com>
2645 * btrace.h (btrace_function) <lbegin, lend>: Remove.
2646 * btrace.c (ftrace_debug): Do not print the line range.
2647 (ftrace_skip_file, ftrace_update_lines): Remove.
2648 (ftrace_new_function): Remove lbegin and lend initialization.
2649 (btrace_compute_ftrace_bts): Remove call to ftrace_update_lines.
2650 * record-btrace.c (btrace_compute_src_line_range): New.
2651 (btrace_call_history_src_line): Call btrace_compute_src_line_range.
2653 2015-03-02 Pedro Alves <palves@redhat.com>
2655 * infrun.c (follow_exec): Delete all threads of the process except
2656 the event thread. Extended comments.
2658 2015-03-02 Joel Brobecker <brobecker@adacore.com>
2660 * contrib/ari/gdb_ari.sh: Reinstate checks for "true" and "false".
2662 2015-03-02 Joel Brobecker <brobecker@adacore.com>
2664 * utils.h: Remove <stdbool.h> #include.
2665 (producer_is_gcc): Change return type to "int".
2666 * utils.c (producer_is_gcc): Change return type to int.
2667 Return 1 instead of true, and 0 instead of false.
2668 Adjust function documentation accordingly.
2670 2015-03-02 Andreas Arnez <arnez@linux.vnet.ibm.com>
2672 * s390-linux-nat.c (have_regset_vxrs): New static variable.
2673 (s390_linux_fetch_inferior_registers): Handle vector registers, if
2675 (s390_linux_store_inferior_registers): Likewise.
2676 (s390_get_hwcap): Remove function. Embed its logic...
2677 (s390_read_description): ...here. Yield a target description with
2678 vector registers if applicable.
2679 * s390-linux-tdep.c: Include "features/s390-vx-linux64.c",
2680 "features/s390-tevx-linux64.c", "features/s390x-vx-linux64.c", and
2681 "features/s390x-tevx-linux64.c".
2682 (struct gdbarch_tdep) <v0_full_regnum>: New field.
2683 (s390_dwarf_regmap): Add vector registers. Remove bogus entries
2684 for "GNU/Linux-specific registers".
2685 (s390_dwarf_reg_r0l): New enum value.
2686 (s390_dwarf_reg_to_regnum): Support vector registers.
2687 (s390_adjust_frame_regnum): Adjust pseudo DWARF register numbers
2688 of GPR lower halves.
2689 (regnum_is_vxr_full): New function.
2690 (s390_register_name): New function.
2691 (s390_pseudo_register_name): Handle v0-v15, which are composed of
2692 f0-f15 and v0l-v15l.
2693 (s390_pseudo_register_type): Likewise.
2694 (s390_pseudo_register_read): Likewise.
2695 (s390_pseudo_register_write): Likewise.
2696 (s390_value_from_register): Account for the fact that values are
2697 placed left-justified in vector registers.
2698 (s390_pseudo_register_reggroup_p): Add pseudo registers v0-v15 to
2699 the vector reggroup and omit them from the general reggroup.
2700 (s390_regmap_vxrs_low, s390_regmap_vxrs_high): New register maps.
2701 (s390_vxrs_low_regset, s390_vxrs_high_regset): New regsets.
2702 (s390_iterate_over_regset_sections): Add iterations for the two
2704 (s390_core_read_description): Yield a target description with
2705 vector registers if applicable.
2706 (s390_gdbarch_init): Handle target descriptions with vector
2707 registers. Add "register_name" gdbarch method.
2708 (_initialize_s390_tdep): Call new tdesc initialization functions.
2709 * s390-linux-tdep.h (HWCAP_S390_VX): New macro.
2710 (S390_V0_LOWER_REGNUM, S390_V1_LOWER_REGNUM, S390_V2_LOWER_REGNUM)
2711 (S390_V3_LOWER_REGNUM, S390_V4_LOWER_REGNUM, S390_V5_LOWER_REGNUM)
2712 (S390_V6_LOWER_REGNUM, S390_V7_LOWER_REGNUM, S390_V8_LOWER_REGNUM)
2713 (S390_V9_LOWER_REGNUM, S390_V10_LOWER_REGNUM)
2714 (S390_V11_LOWER_REGNUM, S390_V12_LOWER_REGNUM)
2715 (S390_V13_LOWER_REGNUM, S390_V14_LOWER_REGNUM)
2716 (S390_V15_LOWER_REGNUM, S390_V16_REGNUM, S390_V17_REGNUM)
2717 (S390_V18_REGNUM, S390_V19_REGNUM, S390_V20_REGNUM)
2718 (S390_V21_REGNUM, S390_V22_REGNUM, S390_V23_REGNUM)
2719 (S390_V24_REGNUM, S390_V25_REGNUM, S390_V26_REGNUM)
2720 (S390_V27_REGNUM, S390_V28_REGNUM, S390_V29_REGNUM)
2721 (S390_V30_REGNUM, S390_V31_REGNUM): New macros.
2722 (S390_NUM_REGS): Adjust value.
2723 (s390_vxrs_low_regset, s390_vxrs_high_regset): Declare.
2724 (tdesc_s390_vx_linux64, tdesc_s390_tevx_linux64)
2725 (tdesc_s390x_vx_linux64, tdesc_s390x_tevx_linux64): Likewise.
2726 * NEWS: Announce S/390 vector register support.
2728 2015-03-02 Andreas Arnez <arnez@linux.vnet.ibm.com>
2730 * features/s390-tevx-linux64.xml: New file.
2731 * features/s390-vx-linux64.xml: New file.
2732 * features/s390-vx.xml: New file.
2733 * features/s390x-tevx-linux64.xml: New file.
2734 * features/s390x-vx-linux64.xml: New file.
2735 * features/Makefile (WHICH): Add s390-vx-linux64,
2736 s390x-vx-linux64, s390-tevx-linux64, and s390x-tevx-linux64.
2737 (s390-vx-linux64-expedite, s390-tevx-linux64-expedite)
2738 (s390x-vx-linux64-expedite, s390x-tevx-linux64-expedite): New
2740 * features/s390-tevx-linux64.c: New generated file.
2741 * features/s390-vx-linux64.c: Likewise.
2742 * features/s390x-tevx-linux64.c: Likewise.
2743 * features/s390x-vx-linux64.c: Likewise.
2744 * regformats/s390-tevx-linux64.dat: Likewise.
2745 * regformats/s390-vx-linux64.dat: Likewise.
2746 * regformats/s390x-tevx-linux64.dat: Likewise.
2747 * regformats/s390x-vx-linux64.dat: Likewise.
2749 2015-02-28 Doug Evans <xdje42@gmail.com>
2751 * symtab.h (struct symtab) <next>: Fix comment.
2753 2015-02-27 Simon Marchi <simon.marchi@ericsson.com>
2755 * python/python.c (python_GdbModuleDef): Rename GdbMethods to
2758 2015-02-27 Pedro Alves <palves@redhat.com>
2760 * dtrace-probe.c (dtrace_probe_ops): Make extern.
2762 2015-02-27 Pedro Alves <palves@redhat.com>
2764 * common/common-exceptions.h (exception_none): Declare.
2765 * common/common-exceptions.c (exception_none): Moved from
2767 (exceptions_state_mc_init): Use exception_none.
2768 * exceptions.c (exception_none): Move to
2769 common/common-exceptions.c.
2770 * exceptions.h (exception_none): Move to
2771 common/common-exceptions.h.
2773 2015-02-27 Pedro Alves <palves@redhat.com>
2775 * main.c (catch_command_errors, catch_command_errors_const):
2776 Remove 'mask' argument. Adjust.
2777 (captured_main): Adjust callers.
2779 2015-02-27 Pedro Alves <palves@redhat.com>
2781 * python/python-internal.h: Include "extension-priv.h".
2783 2015-02-27 Pedro Alves <palves@redhat.com>
2785 * breakpoint.h (enum print_stop_action): Move further up in the
2788 2015-02-27 Pedro Alves <palves@redhat.com>
2790 * gdbarch.sh: Include regcache.h.
2791 * gdbarch.h: Regenerate.
2793 2015-02-27 Pedro Alves <palves@redhat.com>
2795 * arm-tdep.c (decode_insn) <arm_handle_insn, thumb_handle_insn>:
2796 Remove duplicate const.
2797 * sparc-sol2-tdep.c (sparc_sol2_static_transform_name): Remove
2800 2015-02-27 Pedro Alves <palves@redhat.com>
2802 * cp-valprint.c (vtbl_ptr_name): Use EXPORTED_CONST.
2803 * guile/guile.c (extension_language_guile): Use EXPORTED_CONST.
2804 * features/feature_to_c.sh: Tag the generated xml_builtin array
2805 with extern const in C++ mode.
2807 2015-02-27 Tom Tromey <tromey@redhat.com>
2809 * minidebug.c (struct lzma_stream): Rename to ...
2810 (struct gdb_lzma_stream): ... this.
2811 (lzma_open, lzma_pread, lzma_close, lzma_stat): Adjust.
2813 2015-02-27 Pedro Alves <palves@redhat.com>
2815 * mi/mi-cmd-stack.c (mi_apply_ext_lang_frame_filter): New
2817 (mi_cmd_stack_list_locals, mi_cmd_stack_list_args)
2818 (mi_cmd_stack_list_variables): Use it.
2820 2015-02-27 Pedro Alves <palves@redhat.com>
2822 * x86-linux-nat.c (u_debugreg_offset): New function.
2823 (x86_linux_dr_get, x86_linux_dr_set): Use it.
2825 2015-02-27 Pedro Alves <palves@redhat.com>
2827 * nat/x86-dregs.h (enum target_hw_bp_type): Remove forward
2829 Include break-common.h.
2831 2015-02-27 Tom Tromey <tromey@redhat.com>
2832 Pedro Alves <palves@redhat.com>
2834 * arm-tdep.c (set_fp_model_sfunc, arm_set_abi): Use 'int' for
2835 local used to iterate over enums.
2836 * completer.c (signal_completer): Likewise.
2837 * i386-tdep.c (i386_stap_parse_special_token): Likewise.
2838 * rs6000-tdep.c (powerpc_set_vector_abi): Likewise.
2839 * tui/tui-data.c (tui_next_win, tui_prev_win): Likewise.
2840 * tui/tui-layout.c (next_layout, prev_layout): Likewise.
2841 * tui/tui-win.c (tui_refresh_all_win, tui_rehighlight_all)
2842 (tui_resize_all, tui_set_focus_command, tui_all_windows_info): Likewise.
2843 * tui-wingeneral.c (tui_refresh_all): Likewise.
2845 2015-02-27 Pedro Alves <palves@redhat.com>
2847 * target.h: Include "infrun.h".
2849 2015-02-27 Pedro Alves <palves@redhat.com>
2851 * gdb_proc_service.h: Wrap with EXTERN_C_PUSH/EXTERN_C_POP.
2853 2015-02-27 Pedro Alves <palves@redhat.com>
2855 * common/agent.h (IPA_SYM_EXPORTED_NAME): New.
2857 * common/common-defs.h (EXTERN_C_PUSH, EXTERN_C_POP): New macros.
2859 2015-02-27 Pedro Alves <palves@redhat.com>
2861 * cli-out.c (_rl_erase_entire_line): Move declaration out of
2862 cli_mld_erase_entire_line, and make it extern "C".
2863 * common/common-defs.h (EXTERN_C): New.
2864 * completer.c (_rl_completion_prefix_display_length)
2865 (_rl_print_completions_horizontally, QSFUNC): Move declarations
2866 out of gdb_display_match_list_1.
2867 (_rl_qsort_string_compare): Move declaration out of
2868 gdb_display_match_list_1, and make it extern "C".
2869 * defs.h (re_comp): Use EXTERN_C.
2870 * maint.c (_mcleanup): Move declaration out of mcleanup_wrapper,
2871 and make it extern "C".
2872 (monstartup): Move declaration out of maintenance_set_profile_cmd,
2873 and make it extern "C".
2874 (main): Move declaration out of maintenance_set_profile_cmd.
2875 * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason_string): Use
2878 2015-02-27 Pedro Alves <palves@redhat.com>
2880 * python/python.c (GdbMethods): Rename to ...
2881 (python_GdbMethods): ... this and make extern.
2882 (GdbModuleDef): Rename to ...
2883 (python_GdbModuleDef): ... this and make extern.
2885 2015-02-27 Pedro Alves <palves@redhat.com>
2887 * record-btrace.c (set_record_btrace_cmdlist)
2888 (show_record_btrace_cmdlist): Remove redefinitions.
2890 2015-02-27 Tom Tromey <tromey@redhat.com>
2891 Pedro Alves <palves@redhat.com>
2893 * dwarf2-frame.c (enum cfa_how_kind, struct
2894 dwarf2_frame_state_reg_info): Move out of struct
2896 * dwarf2read.c (struct tu_stats): Move out of struct
2898 (struct file_entry): Move out of struct line_header.
2899 (struct nextfield, struct nextfnfield, struct fnfieldlist, struct
2900 typedef_field_list): Move out of struct field_info.
2901 * gdbtypes.h (enum dynamic_prop_kind, union dynamic_prop_data):
2902 Move out of struct dynamic_prop.
2903 (union type_owner, union field_location, struct field, struct
2904 range_bounds, union type_specific): Move out of struct main_type.
2905 (struct fn_fieldlist, struct fn_field, struct typedef_field)
2906 (VOFFSET_STATIC): Move out of struct cplus_struct_type.
2907 (struct call_site_target, union call_site_parameter_u, struct
2908 call_site_parameter): Move out of struct call_site.
2909 * m32c-tdep.c (enum m32c_prologue_kind): Move out of struct
2911 (enum srcdest_kind): Move out of struct srcdest.
2912 * main.c (enum cmdarg_kind): Move out of struct cmdarg.
2913 * prologue-value.h (enum prologue_value_kind): Move out of struct
2915 * s390-linux-tdep.c (enum s390_abi_kind): Move out of struct
2917 * stabsread.c (struct nextfield, struct next_fnfieldlist): Move
2918 out of struct field_info.
2919 * symfile.h (struct other_sections): Move out of struct
2921 * symtab.c (struct symbol_cache_slot): Move out struct
2923 * target-descriptions.c (enum tdesc_type_kind): Move out of
2924 typedef struct tdesc_type.
2925 * tui/tui-data.h (enum tui_line_or_address_kind): Move out of
2926 struct tui_line_or_address.
2927 * value.c (enum internalvar_kind, union internalvar_data): Move
2928 out of struct internalvar.
2929 * xtensa-tdep.h (struct ctype_cache): Move out of struct
2932 2015-02-27 Tom Tromey <tromey@redhat.com>
2933 Pedro Alves <palves@redhat.com>
2935 Rename symbols whose names are reserved C++ keywords throughout.
2937 2015-02-27 Pedro Alves <palves@redhat.com>
2939 * Makefile.in (COMPILER): New, get it from autoconf.
2940 (COMPILE.pre, CC_LD): Use COMPILER.
2941 (CXX): Get from autoconf instead.
2942 (CXX_FOR_TARGET): Default to g++ instead of gcc.
2943 * acinclude.m4: Include build-with-cxx.m4.
2944 * build-with-cxx.m4: New file.
2945 * configure.ac: Call AC_PROG_CXX and GDB_AC_BUILD_WITH_CXX.
2946 Disable -Werror by default if building in C++ mode.
2947 (build_warnings): Add -Wno-sign-compare, -Wno-write-strings and
2948 -Wno-narrowing in C++ mode. Only enable -Wpointer-sign in C mode.
2949 Run supported-warning-flags tests with the C++ compiler.
2950 Save/restore CXXFLAGS too.
2951 * configure: Regenerate.
2953 2015-02-27 Pedro Alves <palves@redhat.com>
2955 * libiberty.m4: New file.
2956 * acinclude.m4: Include libiberty.m4.
2957 * configure.ac: Call libiberty_INIT.
2958 * config.in, configure: Regenerate.
2960 2015-02-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
2962 * s390-linux-tdep.c (s390_gcc_target_options): Not just handle
2963 31-bit targets, but 64-bit targets as well.
2964 (s390_gnu_triplet_regexp): New function.
2965 (s390_gdbarch_init): Set the gcc_target_options gdbarch method for
2966 64-bit targets as well. Set the gnu_triplet_regexp gdbarch
2969 2015-02-27 Jon TURNEY <jon.turney@dronecode.org.uk> (tiny patch)
2971 * windows-nat.c (CONTEXT_DEBUGGER): Remove.
2972 (CONTEXT_DEBUGGER_DR): Add CONTEXT_SEGMENTS. Incorporate flags
2973 from CONTEXT_DEBUGGER.
2975 2015-02-26 Doug Evans <dje@google.com>
2977 * gdbtypes.c (internal_type_vptr_fieldno): Add missing call to
2979 (set_type_vptr_fieldno): Ditto.
2980 (internal_type_vptr_basetype, set_type_vptr_basetype): Ditto.
2981 * gnu-v3-abi.c (gnuv3_dynamic_class): Ditto.
2983 2015-02-26 Pedro Alves <palves@redhat.com>
2985 * auto-load.h (file_is_auto_load_safe): Add ATTRIBUTE_PRINTF.
2986 * complaints.c (vcomplaint): Pass argument FMT directly to
2987 printf-like functions instead of complaint->fmt.
2988 * ctf.c (ctf_save_write_metadata): Add ATTRIBUTE_PRINTF.
2989 * darwin-nat.c (inferior_debug): Add ATTRIBUTE_PRINTF.
2990 * compile/compile-loc2c.c (pushf, unary, binary): Add
2992 (do_compile_dwarf_expr_to_c): Pass string literal as format string
2994 (BINARY): Pass string literal as format string to 'binary'.
2995 * compile/compile-object-load.c (link_callbacks_einfo): Add
2997 * guile/guile-internal.h (gdbscm_printf): Add ATTRIBUTE_PRINTF.
2999 2015-02-26 Pedro Alves <palves@redhat.com>
3001 * windows-termcap.c: Rename to ...
3002 * stub-termcap.c: ... this. Adjust header line.
3003 * Makefile.in (SFILES): Refer to stub-termcap.c instead of
3005 * configure: Regenerate.
3006 * configure.ac: Refer to stub-termcap.o instead of
3008 * gdb_curses.h: Mention stub-termcap.c instead of
3011 2015-02-26 Jan Kratochvil <jan.kratochvil@redhat.com>
3013 * compile/compile-c-symbols.c (convert_one_symbol, convert_symbol_bmsym)
3014 (gcc_symbol_address): Call gnu_ifunc_resolve_addr.
3016 2015-02-26 Antoine Tremblay <antoine.tremblay@ericsson.com>
3018 * gdb/infcmd.c (print_return_value): use type_to_string to print type.
3020 2015-02-26 Jan Kratochvil <jan.kratochvil@redhat.com>
3022 * elfread.c (elf_read_minimal_symbols): Use bfd_alloc for
3023 bfd_canonicalize_symtab.
3025 2015-02-25 John Baldwin <jhb@FreeBSD.org>
3027 * amd64fbsd-nat.c: Include sys/user.h.
3028 (_initialize_amd64fbsd_nat): Use the KERN_PROC_SIGTRAMP sysctl
3029 instead of KERN_PS_STRINGS to locate the signal trampoline.
3030 * i386fbsd-nat.c: Include sys/user.h.
3031 (_initialize_i386fbsd_nat): Use the KERN_PROC_SIGTRAMP sysctl
3032 instead of KERN_PS_STRINGS to locate the signal trampoline.
3033 * amd64fbsd-tdep.c (amd64fbsd_sigtramp_code): New.
3034 (amd64fbsd_sigtramp_p): New.
3035 (amd64fbsd_sigtramp_start_addr, amd64fbsd_sigtramp_end_addr): No
3036 longer set default values.
3037 (amd64fbsd_init_abi): Set "sigtramp_p" to "amd64fbsd_sigtramp_p".
3038 * i386fbsd-tdep.c (i386fbsd_sigtramp_start)
3039 (i386fbsd_sigtramp_middle, i386fbsd_sigtramp_end)
3040 (i386fbsd_freebsd4_sigtramp_start)
3041 (i386fbsd_freebsd4_sigtramp_middle)
3042 (i386fbsd_freebsd4_sigtramp_end, i386fbsd_osigtramp_start)
3043 (i386fbsd_osigtramp_middle, i386fbsd_osigtramp_end): New.
3044 (i386fbsd_sigtramp_p): New.
3045 (i386fbsd_sigtramp_start_addr, i386fbsd_sigtramp_end_addr): No
3046 longer set default values.
3047 (i386fbsd_init_abi): Set "sigtramp_p" to "i386fbsd_sigtramp_p".
3049 2015-02-25 John Baldwin <jhb@freebsd.org>
3051 * amd64fbsd-tdep.c (amd64fbsd_sigcontext_addr): Use
3052 get_frame_register instead of frame_unwind_register_unsigned.
3054 2015-02-26 Jan Kratochvil <jan.kratochvil@redhat.com>
3057 * compile/compile-c-support.c (c_compute_program): Change // comment.
3058 * compile/compile-object-load.c (setup_sections): Change // comment.
3060 2015-02-26 Joel Brobecker <brobecker@adacore.com>
3063 * iq2000-tdep.c (iq2000_frame_cache): Delete C++-style comment.
3065 2015-02-23 Pedro Alves <palves@redhat.com>
3067 * remote.c (skip_to_semicolon): New function.
3068 (remote_parse_stop_reply) <T stop reply>: Use it. Don't
3069 special case the stop reasons that look like hex numbers
3070 upfront. Instead handle real register numbers after matching
3071 all the known stop reasons.
3073 2015-02-21 Doug Evans <dje@google.com>
3075 PR c++/17976, symtab/17821
3076 * cp-namespace.c (cp_search_static_and_baseclasses): New parameter
3077 is_in_anonymous. All callers updated.
3078 (find_symbol_in_baseclass): Ditto.
3079 (cp_lookup_nested_symbol_1): Ditto. Don't search all static blocks
3080 for symbols in an anonymous namespace.
3081 * dwarf2read.c (namespace_name): Don't call dwarf2_name, fetch
3082 DW_AT_name directly.
3083 (dwarf2_name): Convert missing namespace name to
3084 CP_ANONYMOUS_NAMESPACE_STR.
3086 2015-02-20 Pedro Alves <palves@redhat.com>
3088 * linux-nat.c (linux_handle_extended_wait): Call
3089 thread_db_notice_clone whenever a new clone LWP is detected.
3090 (linux_stop_and_wait_all_lwps, linux_unstop_all_lwps): New
3092 * linux-nat.h (thread_db_attach_lwp): Delete declaration.
3093 (thread_db_notice_clone, linux_stop_and_wait_all_lwps)
3094 (linux_unstop_all_lwps): Declare.
3095 * linux-thread-db.c (struct thread_get_info_inout): Delete.
3096 (thread_get_info_callback): Delete.
3097 (thread_from_lwp): Use td_thr_get_info and record_thread.
3098 (thread_db_attach_lwp): Delete.
3099 (thread_db_notice_clone): New function.
3100 (try_thread_db_load_1): If /proc is mounted and shows the
3101 process'es task list, walk over all LWPs and call thread_from_lwp
3102 instead of relying on td_ta_thr_iter.
3103 (attach_thread): Don't call check_thread_signals here. Split the
3104 tail part of the function (which adds the thread to the core GDB
3106 (record_thread): ... this function. Call check_thread_signals
3108 (thread_db_wait): Don't call thread_db_find_new_threads_1. Always
3109 call thread_from_lwp.
3110 (thread_db_update_thread_list): Rename to ...
3111 (thread_db_update_thread_list_org): ... this.
3112 (thread_db_update_thread_list): New function.
3113 (thread_db_find_thread_from_tid): Delete.
3114 (thread_db_get_ada_task_ptid): Simplify.
3115 * nat/linux-procfs.c: Include <sys/stat.h>.
3116 (linux_proc_task_list_dir_exists): New function.
3117 * nat/linux-procfs.h (linux_proc_task_list_dir_exists): Declare.
3119 2015-02-20 Pedro Alves <palves@redhat.com>
3121 * linux-nat.c (lin_lwp_attach_lwp): No longer special case the
3122 main LWP. Handle the case of waitpid returning 0 if we're already
3123 attached to the LWP. Don't set the LWP's last_resume_kind to
3124 resume_stop if we already knew about the LWP.
3125 (linux_nat_filter_event): Add debug logs.
3127 2015-02-20 Pedro Alves <palves@redhat.com>
3129 * target.h (forward_target_decr_pc_after_break): Delete
3132 2015-02-20 Pedro Alves <palves@redhat.com>
3135 * linux-thread-db.c (thread_get_info_callback): Return early if
3136 the thread's lwp id is -1.
3138 2015-02-20 Joel Brobecker <brobecker@adacore.com>
3142 2015-02-19 Steve Ellcey <sellcey@imgtec.com>
3144 * dtrace-probe.c (dtrace_process_dof_probe): Initialize arg.expr.
3145 (dtrace_get_probes) Change type of variable 'dof'.
3147 2015-02-19 Antoine Tremblay <antoine.tremblay@ericsson.com>
3149 PR breakpoints/16812
3150 * linux-nat.c (linux_nat_filter_event): Report SIGTRAP,SIGILL,SIGSEGV.
3151 * nat/linux-ptrace.c (linux_wstatus_maybe_breakpoint): Add.
3152 * nat/linux-ptrace.h: Add linux_wstatus_maybe_breakpoint.
3154 2015-02-19 David Taylor <dtaylor@emc.com>
3156 * common/ax.def (setv): Fix consumed entry in setv DEFOP.
3158 2015-02-18 Patrick Palka <patrick@parcs.ath.cx>
3160 * tui/tui-io.c (tui_handle_resize_during_io): Remove this
3162 (tui_putc): Don't call tui_handle_resize_during_io.
3163 (tui_getc): Likewise.
3164 (tui_mld_getc): Likewise.
3165 * tui/tui-win.c: Include event-loop.h and tui/tui-io.h.
3166 (tui_sigwinch_token): New static variable.
3167 (tui_initialize_win): Adjust documentation. Set
3169 (tui_async_resize_screen): New asynchronous callback.
3170 (tui_sigwinch_handler): Adjust documentation. Asynchronously
3171 invoke tui_async_resize_screen.
3173 2015-02-18 Jose E. Marchesi <jose.marchesi@oracle.com>
3175 * configure: Regenerated.
3176 * configure.ac: Use GDB_AC_TRANSFORM.
3177 * Makefile.in (aclocal_m4_deps): Added transform.m4.
3178 * acinclude.m4: sinclude transform.m4.
3179 * transform.m4: New file.
3180 (GDB_AC_TRANSFORM): New macro.
3182 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
3184 * NEWS: Announce the support for DTrace SDT probes.
3186 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
3188 * amd64-linux-tdep.c: Include "parser-defs.h" and "user-regs.h".
3189 (amd64_dtrace_parse_probe_argument): New function.
3190 (amd64_dtrace_probe_is_enabled): Likewise.
3191 (amd64_dtrace_enable_probe): Likewise.
3192 (amd64_dtrace_disable_probe): Likewise.
3193 (amd64_linux_init_abi): Register the
3194 `gdbarch_dtrace_probe_argument', `gdbarch_dtrace_enable_probe',
3195 `gdbarch_dtrace_disable_probe' and
3196 `gdbarch_dtrace_probe_is_enabled' hooks.
3197 (amd64_dtrace_disabled_probe_sequence_1): New constant.
3198 (amd64_dtrace_disabled_probe_sequence_2): Likewise.
3199 (amd64_dtrace_enable_probe_sequence): Likewise.
3200 (amd64_dtrace_disable_probe_sequence): Likewise.
3202 2015-01-17 Jose E. Marchesi <jose.marchesi@oracle.com>
3204 * breakpoint.c (BREAK_ARGS_HELP): Help string updated to mention
3205 the -probe-dtrace new vpossible value for PROBE_MODIFIER.
3206 * configure.ac (CONFIG_OBS): dtrace-probe.o added if BFD can
3208 * Makefile.in (SFILES): dtrace-probe.c added.
3209 * configure: Regenerate.
3210 * dtrace-probe.c: New file.
3211 (SHT_SUNW_dof): New constant.
3212 (dtrace_probe_type): New enum.
3213 (dtrace_probe_arg): New struct.
3214 (dtrace_probe_arg_s): New typedef.
3215 (struct dtrace_probe_enabler): New struct.
3216 (dtrace_probe_enabler_s): New typedef.
3217 (dtrace_probe): New struct.
3218 (dtrace_probe_is_linespec): New function.
3219 (dtrace_dof_sect_type): New enum.
3220 (dtrace_dof_dofh_ident): Likewise.
3221 (dtrace_dof_encoding): Likewise.
3222 (DTRACE_DOF_ENCODE_LSB): Likewise.
3223 (DTRACE_DOF_ENCODE_MSB): Likewise.
3224 (dtrace_dof_hdr): New struct.
3225 (dtrace_dof_sect): Likewise.
3226 (dtrace_dof_provider): Likewise.
3227 (dtrace_dof_probe): Likewise.
3228 (DOF_UINT): New macro.
3229 (DTRACE_DOF_PTR): Likewise.
3230 (DTRACE_DOF_SECT): Likewise.
3231 (dtrace_process_dof_probe): New function.
3232 (dtrace_process_dof): Likewise.
3233 (dtrace_build_arg_exprs): Likewise.
3234 (dtrace_get_arg): Likewise.
3235 (dtrace_get_probes): Likewise.
3236 (dtrace_get_probe_argument_count): Likewise.
3237 (dtrace_can_evaluate_probe_arguments): Likewise.
3238 (dtrace_evaluate_probe_argument): Likewise.
3239 (dtrace_compile_to_ax): Likewise.
3240 (dtrace_probe_destroy): Likewise.
3241 (dtrace_gen_info_probes_table_header): Likewise.
3242 (dtrace_gen_info_probes_table_values): Likewise.
3243 (dtrace_probe_is_enabled): Likewise.
3244 (dtrace_probe_ops): New variable.
3245 (info_probes_dtrace_command): New function.
3246 (_initialize_dtrace_probe): Likewise.
3247 (dtrace_type_name): Likewise.
3249 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
3251 * gdbarch.sh (dtrace_parse_probe_argument): New.
3252 (dtrace_probe_is_enabled): Likewise.
3253 (dtrace_enable_probe): Likewise.
3254 (dtrace_disable_probe): Likewise.
3255 * gdbarch.c: Regenerate.
3256 * gdbarch.h: Regenerate.
3258 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
3260 * stap-probe.c (stap_probe_ops): Add NULLs in the static
3261 stap_probe_ops for `enable_probe' and `disable_probe'.
3262 * probe.c (enable_probes_command): New function.
3263 (disable_probes_command): Likewise.
3264 (_initialize_probe): Define the cli commands `enable probe' and
3266 (parse_probe_linespec): New function.
3267 (info_probes_for_ops): Use parse_probe_linespec.
3268 * probe.h (probe_ops): New hooks `enable_probe' and
3271 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
3273 * probe.c (compute_probe_arg): Moved from stap-probe.c
3274 (compile_probe_arg): Likewise.
3275 (probe_funcs): Likewise.
3276 * stap-probe.c (compute_probe_arg): Moved to probe.c.
3277 (compile_probe_arg): Likewise.
3278 (probe_funcs): Likewise.
3280 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
3282 * probe.c (print_ui_out_not_applicables): New function.
3283 (exists_probe_with_pops): Likewise.
3284 (info_probes_for_ops): Do not include column headers for probe
3285 types for which no probe has been actually found on any object.
3286 Also invoke `print_ui_out_not_applicables' in order to match the
3287 column rows with the header when probes of several types are
3289 Print the "Type" column.
3290 * probe.h (probe_ops): Added a new probe operation `type_name'.
3291 * stap-probe.c (stap_probe_ops): Add `stap_type_name'.
3292 (stap_type_name): New function.
3294 2015-02-17 Patrick Palka <patrick@parcs.ath.cx>
3296 * tui/tui-io.c (tui_getc): Don't call key_is_command_char.
3297 (key_is_command_char): Delete.
3299 2015-02-17 Pedro Alves <palves@redhat.com>
3301 * tui/tui.c (tui_enable): Resize windows before anything
3302 might show a window.
3304 2015-02-17 Max Ostapenko <m.ostapenko@partner.samsung.com>
3307 * aarch64-linux-nat.c: Don't include features/aarch64.c anymore.
3308 (aarch64_linux_read_description): Remove initialize_tdesc_aarch64
3310 * aarch64-tdep.h (tdesc_aarch64): Declare.
3312 2015-02-12 Mark Wielaard <mjw@redhat.com>
3314 * contrib/ari/gdb_ari.sh: Remove checks for "true" and "false".
3316 2015-02-13 Doug Evans <dje@google.com>
3318 * cp-namespace.c (cp_basic_lookup_symbol): Rename parameter
3319 anonymous_namespace to is_in_anonymous for consistency with the rest
3321 (cp_lookup_bare_symbol): Fix typo in comment.
3322 (cp_search_static_and_baseclasses): Ditto.
3323 (search_symbol_list): Use vertical space in comment better.
3324 (reset_directive_searched): Ditto. Fix typo.
3325 (cp_lookup_nested_symbol_1): Clarify contents of NESTED_NAME parameter.
3327 2015-02-13 Yao Qi <yao.qi@arm.com>
3329 * MAINTAINERS: Update my email address.
3331 2015-02-12 Doug Evans <dje@google.com>
3333 * symtab.c (completion_list_add_name): Fix memory leak.
3335 2015-02-12 Doug Evans <dje@google.com>
3337 * completer.c (complete_line): Remove incorrect comment.
3339 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
3341 * python/py-framefilter.c (py_print_single_arg, enumerate_locals)
3342 (py_print_frame): Use RETURN_MASK_ERROR.
3344 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
3346 * python/py-framefilter.c (py_print_frame): Mention RETURN_QUIT in
3347 function comment. Wrap all function that can throw in cleanups.
3348 (gdbpy_apply_frame_filter): Wrap all function that can throw in
3351 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
3353 * python/py-framefilter.c (py_print_frame): Substitute goto error.
3354 Remove the error label.
3356 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
3358 * python/py-framefilter.c (py_print_frame): Put conditional code paths
3359 with goto first, indent the former else codepath left. Put variable
3360 'elided' to a new inner block.
3362 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
3364 * python/py-framefilter.c (py_print_frame): Whitespacing fixes.
3366 2015-02-11 Pedro Alves <palves@redhat.com>
3368 * xcoffread.c (within_function): Delete.
3370 2015-02-11 Tom Tromey <tromey@redhat.com>
3371 Pedro Alves <palves@redhat.com>
3373 * breakpoint.c (base_breakpoint_ops): Delete.
3374 * dwarf2loc.c (dwarf_expr_ctx_funcs): Make extern.
3375 * elfread.c (elf_sym_fns_gdb_index, elf_sym_fns_lazy_psyms): Make extern.
3376 * guile/guile.c (guile_extension_script_ops, guile_extension_ops): Make extern.
3377 * ppcnbsd-tdep.c (ppcnbsd2_sigtramp): Make extern.
3378 * python/py-arch.c (arch_object_type): Make extern.
3379 * python/py-block.c (block_syms_iterator_object_type): Make extern.
3380 * python/py-bpevent.c (breakpoint_event_object_type): Make extern.
3381 * python/py-cmd.c (cmdpy_object_type): Make extern.
3382 * python/py-continueevent.c (continue_event_object_type)
3383 * python/py-event.h (GDBPY_NEW_EVENT_TYPE): Remove 'qual'
3384 parameter. Update all callers.
3385 * python/py-evtregistry.c (eventregistry_object_type): Make extern.
3386 * python/py-exitedevent.c (exited_event_object_type): Make extern.
3387 * python/py-finishbreakpoint.c (finish_breakpoint_object_type): Make extern.
3388 * python/py-function.c (fnpy_object_type): Make extern.
3389 * python/py-inferior.c (inferior_object_type, membuf_object_type): Make extern.
3390 * python/py-infevents.c (call_pre_event_object_type)
3391 (inferior_call_post_event_object_type).
3392 (memory_changed_event_object_type): Make extern.
3393 * python/py-infthread.c (thread_object_type): Make extern.
3394 * python/py-lazy-string.c (lazy_string_object_type): Make extern.
3395 * python/py-linetable.c (linetable_entry_object_type)
3396 (linetable_object_type, ltpy_iterator_object_type): Make extern.
3397 * python/py-newobjfileevent.c (new_objfile_event_object_type)
3398 (clear_objfiles_event_object_type): Make extern.
3399 * python/py-objfile.c (objfile_object_type): Make extern.
3400 * python/py-param.c (parmpy_object_type): Make extern.
3401 * python/py-progspace.c (pspace_object_type): Make extern.
3402 * python/py-signalevent.c (signal_event_object_type): Make extern.
3403 * python/py-symtab.c (symtab_object_type, sal_object_type): Make extern.
3404 * python/py-type.c (type_object_type, field_object_type)
3405 (type_iterator_object_type): Make extern.
3406 * python/python.c (python_extension_script_ops)
3407 (python_extension_ops): Make extern.
3408 * stap-probe.c (stap_probe_ops): Make extern.
3410 2015-02-11 Pedro Alves <pedro@codesourcery.com>
3412 * infrun.c (adjust_pc_after_break): Don't adjust the PC just
3413 because the event thread is not the current thread.
3415 2015-02-11 Doug Evans <xdje42@gmail.com>
3417 * gdbtypes.c (internal_type_self_type): If TYPE_SPECIFIC_FIELD hasn't
3418 been initialized yet, return NULL.
3420 2015-02-11 Doug Evans <dje@google.com>
3422 * symfile.h (new_symfile_objfile): Delete.
3423 * symfile.c (finish_new_objfile): Renamed from new_symfile_objfile.
3424 All callers updated.
3426 2015-02-11 Patrick Palka <patrick@parcs.ath.cx>
3428 * tui/tui-io.c (tui_handle_resize_during_io): Call
3429 tui_update_gdb_sizes() after resizing the screen.
3430 * tui/tui.c (tui_enable): Resize the terminal before
3431 calling tui_update_gdb_sizes().
3433 2015-02-11 Patrick Palka <patrick@parcs.ath.cx>
3435 * tui/tui-io.c (tui_getc): Move cursor to the end of the command
3436 line before printing a newline.
3438 2015-02-11 Mark Wielaard <mjw@redhat.com>
3440 * utils.c (producer_is_gcc): Return true or false.
3442 2015-02-10 Mark Wielaard <mjw@redhat.com>
3444 * utils.h (producer_is_gcc): Change return type to bool. Add major
3446 * utils.c (producer_is_gcc): Likewise.
3447 (producer_is_gcc_ge_4): Adjust producer_is_gcc call.
3448 * dwarf2read.c (check_producer): Likewise.
3450 2015-02-10 Pedro Alves <palves@redhat.com>
3452 * infrun.c (displaced_step_fixup): Switch to the event thread
3453 before calling gdbarch_displaced_step_fixup.
3455 2015-02-10 Antoine Tremblay <antoine.tremblay@ericsson.com>
3457 * MAINTAINERS (Write After Approval): Add Antoine Tremblay.
3459 2015-02-10 Simon Marchi <simon.marchi@ericsson.com>
3461 * ada-varobj.c (ada_name_of_child): Constify parent.
3462 (ada_path_expr_of_child): Same.
3463 (ada_value_of_child): Same.
3464 (ada_type_of_child): Same.
3465 * c-varobj.c (c_is_path_expr_parent): Same.
3466 (c_describe_child): Same.
3467 (c_name_of_child): Same.
3468 (c_value_of_child): Same.
3469 (c_type_of_child): Same.
3470 (cplus_number_of_children): Same.
3471 (cplus_describe_child): Constify var.
3472 (cplus_name_of_child): Constify parent.
3473 (cplus_value_of_child): Same.
3474 (cplus_type_of_child): Same.
3475 * jv-varobj.c (java_name_of_child): Same.
3476 (java_value_of_child): Same.
3477 (java_type_of_child): Same.
3478 * varobj.c (value_of_child): Same.
3479 (varobj_default_is_path_expr_parent): Constify var, parent and return
3481 (varobj_get_path_expr): Constify var, modify path_expr through
3483 (install_new_value): Constify parent.
3484 (value_of_child): Constify parent.
3485 * varobj.h (struct varobj): Constify parent.
3486 (struct lang_varobj_ops): Constify name_of_child, value_of_child and
3488 (varobj_get_path_expr): Constify var.
3489 (varobj_get_path_expr_parent): Constify var and return value.
3491 2015-02-10 Luis Machado <lgustavo@codesourcery.com>
3493 * arm-tdep.c (arm_prologue_unwind_stop_reason): New function.
3494 (arm_prologue_this_id): Move PC and SP limit checks to
3495 arm_prologue_unwind_stop_reason.
3496 (arm_prologue_unwind) <stop_reason> : Set to
3497 arm_prologue_unwind_stop_reason.
3499 2015-02-09 Mark Wielaard <mjw@redhat.com>
3501 * dwarf2read.c (set_cu_language): Recognize DW_LANG_Fortran03 and
3502 DW_LANG_Fortran08 as language_fortran.
3504 2015-02-09 Sergio Durigan Junior <sergiodj@redhat.com>
3507 * gdb/remote.c (remote_parse_stop_reply): Fix wrong comparison
3508 of pointer against char.
3510 2015-02-09 Mark Wielaard <mjw@redhat.com>
3512 * c-typeprint.c (cp_type_print_method_args): Handle '_Atomic'.
3513 (c_type_print_modifier): Likewise.
3514 * dwarf2read.c (read_tag_atomic_type): New function.
3515 (read_type_die_1): Handle DW_TAG_atomic_type.
3516 * gdbtypes.c (make_atomic_type): New function.
3517 (recursive_dump_type): Handle TYPE_ATOMIC.
3518 * gdbtypes.h (enum type_flag_values): Renumber.
3519 (enum type_instance_flag_value): Add TYPE_INSTANCE_FLAG_ATOMIC.
3520 (TYPE_ATOMIC): New macro.
3521 (make_atomic_type): Declare.
3523 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
3525 * btrace.c (ftrace_find_call): Skip gaps.
3526 (ftrace_new_function): Initialize level.
3527 (ftrace_new_call, ftrace_new_tailcall, ftrace_new_return)
3528 (ftrace_new_switch): Update
3530 (ftrace_new_gap): New.
3531 (ftrace_update_function): Create new function after gap.
3532 (btrace_compute_ftrace_bts): Create gap on error.
3533 (btrace_stitch_bts): Update parameters. Clear trace if it
3535 (btrace_stitch_trace): Update parameters. Update callers.
3536 (btrace_clear): Reset the number of gaps.
3537 (btrace_insn_get): Return NULL if the iterator points to a gap.
3538 (btrace_insn_number): Return zero if the iterator points to a gap.
3539 (btrace_insn_end): Allow gaps at the end.
3540 (btrace_insn_next, btrace_insn_prev, btrace_insn_cmp): Handle gaps.
3541 (btrace_find_insn_by_number): Assert that the found iterator does
3543 (btrace_call_next, btrace_call_prev): Assert that the last function
3545 * btrace.h (btrace_bts_error): New.
3546 (btrace_function): Update comment.
3547 (btrace_function) <insn, insn_offset, number>: Update comment.
3548 (btrace_function) <errcode>: New.
3549 (btrace_thread_info) <ngaps>: New.
3550 (btrace_thread_info) <replay>: Update comment.
3551 (btrace_insn_get): Update comment.
3552 * record-btrace.c (btrace_ui_out_decode_error): New.
3553 (record_btrace_info): Print number of gaps.
3554 (btrace_insn_history, btrace_call_history): Call
3555 btrace_ui_out_decode_error for gaps.
3556 (record_btrace_step_thread, record_btrace_start_replaying): Skip gaps.
3558 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
3560 * common/btrace-common.h (btrace_cpu_vendor, btrace_cpu): New.
3561 * nat/linux-btrace.c: (btrace_this_cpu): New.
3562 (cpu_supports_bts): Call btrace_this_cpu.
3563 (intel_supports_bts): Add cpu parameter.
3565 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
3567 * btrace.h (btrace_insn_class): New.
3568 (btrace_insn) <size, iclass>: New.
3569 * btrace.c (ftrace_find_call): Update parameters. Update users.
3570 Use instruction classification.
3571 (ftrace_new_return): Update parameters. Update users.
3572 (ftrace_update_function): Update parameters. Update users. Use
3573 instruction classification.
3574 (ftrace_update_insns): Update parameters. Update users.
3575 (ftrace_classify_insn): New.
3576 (btrace_compute_ftrace_bts): Fill in new btrace_insn fields. Add
3577 TRY_CATCH around call to gdb_insn_length.
3579 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
3581 * btrace.c (btrace_compute_ftrace_bts, btrace_compute_ftrace):
3582 Update parameters. Update users.
3584 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
3586 * btrace.c (parse_xml_btrace_conf_bts): Add size.
3587 (btrace_conf_bts_attributes): New.
3588 (btrace_conf_children): Add attributes.
3589 * common/btrace-common.h (btrace_config_bts): New.
3590 (btrace_config)<bts>: New.
3591 (btrace_config): Update comment.
3592 * nat/linux-btrace.c (linux_enable_btrace, linux_enable_bts):
3594 * features/btrace-conf.dtd: Increment version. Add size
3595 attribute to bts element.
3596 * record-btrace.c (set_record_btrace_bts_cmdlist,
3597 show_record_btrace_bts_cmdlist): New.
3598 (record_btrace_adjust_size, record_btrace_print_bts_conf,
3599 record_btrace_print_conf, cmd_set_record_btrace_bts,
3600 cmd_show_record_btrace_bts): New.
3601 (record_btrace_info): Call record_btrace_print_conf.
3602 (_initialize_record_btrace): Add commands.
3603 * remote.c: Add PACKET_Qbtrace_conf_bts_size enum.
3604 (remote_protocol_features): Add Qbtrace-conf:bts:size packet.
3605 (btrace_sync_conf): Synchronize bts size.
3606 (_initialize_remote): Add Qbtrace-conf:bts:size packet.
3607 * NEWS: Announce new commands and new packets.
3609 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
3611 * Makefile.in (XMLFILES): Add btrace-conf.dtd.
3612 * x86-linux-nat.c (x86_linux_enable_btrace): Update parameters.
3613 (x86_linux_btrace_conf): New.
3614 (x86_linux_create_target): Initialize to_btrace_conf.
3615 * nat/linux-btrace.c (linux_enable_btrace): Update parameters.
3616 Check format. Split into this and ...
3617 (linux_enable_bts): ... this.
3618 (linux_btrace_conf): New.
3619 (perf_event_skip_record): Renamed into ...
3620 (perf_event_skip_bts_record): ... this. Updated users.
3621 (linux_disable_btrace): Split into this and ...
3622 (linux_disable_bts): ... this.
3623 (linux_read_btrace): Check format.
3624 * nat/linux-btrace.h (linux_enable_btrace): Update parameters.
3625 (linux_btrace_conf): New.
3626 (btrace_target_info)<ptid>: Moved.
3627 (btrace_target_info)<conf>: New.
3628 (btrace_target_info): Split into this and ...
3629 (btrace_tinfo_bts): ... this. Updated users.
3630 * btrace.c (btrace_enable): Update parameters.
3631 (btrace_conf, parse_xml_btrace_conf_bts, parse_xml_btrace_conf)
3632 (btrace_conf_children, btrace_conf_attributes)
3633 (btrace_conf_elements): New.
3634 * btrace.h (btrace_enable): Update parameters.
3635 (btrace_conf, parse_xml_btrace_conf): New.
3636 * common/btrace-common.h (btrace_config): New.
3637 * feature/btrace-conf.dtd: New.
3638 * record-btrace.c (record_btrace_conf): New.
3639 (record_btrace_cmdlist): New.
3640 (record_btrace_enable_warn, record_btrace_open): Pass
3641 &record_btrace_conf.
3642 (record_btrace_info): Print recording format.
3643 (cmd_record_btrace_bts_start): New.
3644 (cmd_record_btrace_start): Call cmd_record_btrace_bts_start.
3645 (_initialize_record_btrace): Add "record btrace bts" subcommand.
3646 Add "record bts" alias command.
3647 * remote.c (remote_state)<btrace_config>: New.
3648 (remote_btrace_reset, PACKET_qXfer_btrace_conf): New.
3649 (remote_protocol_features): Add qXfer:btrace-conf:read.
3650 (remote_open_1): Call remote_btrace_reset.
3651 (remote_xfer_partial): Handle TARGET_OBJECT_BTRACE_CONF.
3652 (btrace_target_info)<conf>: New.
3653 (btrace_sync_conf, btrace_read_config): New.
3654 (remote_enable_btrace): Update parameters. Call btrace_sync_conf and
3656 (remote_btrace_conf): New.
3657 (init_remote_ops): Initialize to_btrace_conf.
3658 (_initialize_remote): Add qXfer:btrace-conf packet.
3659 * target.c (target_enable_btrace): Update parameters.
3660 (target_btrace_conf): New.
3661 * target.h (target_enable_btrace): Update parameters.
3662 (target_btrace_conf): New.
3663 (target_object)<TARGET_OBJECT_BTRACE_CONF>: New.
3664 (target_ops)<to_enable_btrace>: Update parameters and comment.
3665 (target_ops)<to_btrace_conf>: New.
3666 * target-delegates: Regenerate.
3667 * target-debug.h (target_debug_print_const_struct_btrace_config_p)
3668 (target_debug_print_const_struct_btrace_target_info_p): New.
3669 * NEWS: Announce new command and new packet.
3671 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
3673 * nat/linux-btrace.h (perf_event_buffer): New.
3674 (btrace_target_info) <buffer, size, data_head>: Replace with ...
3676 * nat/linux-btrace.c (perf_event_header, perf_event_mmap_size)
3677 (perf_event_buffer_size, perf_event_buffer_begin)
3678 (perf_event_buffer_end, linux_btrace_has_changed): Removed.
3680 (perf_event_new_data): New.
3682 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
3684 * btrace.c (btrace_enable): Pass BTRACE_FORMAT_BTS.
3685 * record-btrace.c (record_btrace_open): Remove call to
3686 target_supports_btrace.
3687 * remote.c (remote_supports_btrace): Update parameters.
3688 * target.c (target_supports_btrace): Update parameters.
3689 * target.h (to_supports_btrace, target_supports_btrace): Update
3691 * target-delegates.c: Regenerate.
3692 * target-debug.h (target_debug_print_enum_btrace_format): New.
3693 * nat/linux-btrace.c
3694 (kernel_supports_btrace): Rename into ...
3695 (kernel_supports_bts): ... this. Update users. Update warning text.
3696 (intel_supports_btrace): Rename into ...
3697 (intel_supports_bts): ... this. Update users.
3698 (cpu_supports_btrace): Rename into ...
3699 (cpu_supports_bts): ... this. Update users.
3700 (linux_supports_btrace): Update parameters. Split into this and ...
3701 (linux_supports_bts): ... this.
3702 * nat/linux-btrace.h (linux_supports_btrace): Update parameters.
3704 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
3706 * Makefile.in (SFILES): Add common/btrace-common.c.
3707 (COMMON_OBS): Add common/btrace-common.o.
3708 (btrace-common.o): Add build rules.
3709 * btrace.c (parse_xml_btrace): Update parameters.
3710 (parse_xml_btrace_block): Set format field.
3711 (btrace_add_pc, btrace_fetch): Use struct btrace_data.
3712 (do_btrace_data_cleanup, make_cleanup_btrace_data): New.
3713 (btrace_compute_ftrace): Split into this and...
3714 (btrace_compute_ftrace_bts): ...this.
3715 (btrace_stitch_trace): Split into this and...
3716 (btrace_stitch_bts): ...this.
3717 * btrace.h (parse_xml_btrace): Update parameters.
3718 (make_cleanup_btrace_data): New.
3719 * common/btrace-common.c: New.
3720 * common/btrace-common.h: Include common-defs.h.
3721 (btrace_block_s): Update comment.
3722 (btrace_format): New.
3723 (btrace_format_string): New.
3724 (btrace_data_bts): New.
3726 (btrace_data_init, btrace_data_fini, btrace_data_empty): New.
3727 * remote.c (remote_read_btrace): Update parameters.
3728 * target.c (target_read_btrace): Update parameters.
3729 * target.h (target_read_btrace): Update parameters.
3730 (target_ops)<to_read_btrace>: Update parameters.
3731 * x86-linux-nat.c (x86_linux_read_btrace): Update parameters.
3732 * target-delegates.c: Regenerate.
3733 * target-debug (target_debug_print_struct_btrace_data_p): New.
3734 * nat/linux-btrace.c (linux_read_btrace): Split into this and...
3735 (linux_read_bts): ...this.
3736 * nat/linux-btrace.h (linux_read_btrace): Update parameters.
3738 2015-02-06 Doug Evans <dje@google.com>
3740 * remote-m32r-sdi.c: Include symfile.h.
3742 2015-02-06 Doug Evans <dje@google.com>
3744 * symtab.h (clear_symtab_users, deduce_language_from_filename): Move
3745 * symfile.h (clear_symtab_users, deduce_language_from_filename): ...
3748 2015-02-06 Pedro Alves <palves@redhat.com>
3750 * linux-thread-db.c (find_new_threads_callback): Add debug output.
3752 2015-02-06 Simon Marchi <simon.marchi@ericsson.com>
3755 * breakpoint.c (map_breakpoint_numbers): Check for empty args string.
3756 (enable_count_command): Check args for NULL value.
3758 2015-02-05 Doug Evans <xdje42@gmail.com>
3760 * guile/scm-frame.c: Fix spelling errors in a comment.
3762 2015-02-04 Jan Kratochvil <jan.kratochvil@redhat.com>
3764 * python/python-internal.h (Py_hash_t): Define it for Python <3.2.
3765 * python/py-value.c (valpy_fetch_lazy): Use it. Remove cast to the
3768 2015-02-04 Pedro Alves <palves@redhat.com>
3770 * linux-nat.c (handle_extended_wait): Don't resume LWPs here.
3771 (wait_lwp): Don't call wait_lwp if linux_handle_extended_wait
3773 (resume_stopped_resumed_lwps): Don't check whether the thread is
3774 marked as executing.
3775 (linux_nat_wait_1): Use resume_stopped_resumed_lwps.
3777 2015-02-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
3779 * regset.h (struct regset): Add flags field.
3780 (REGSET_VARIABLE_SIZE): New value for a regset's flags field.
3781 * corelow.c (get_core_register_section): Add warning if the size
3782 exceeds the requested size and the regset does not have the
3783 REGSET_VARIABLE_SIZE flag set.
3784 * alphanbsd-tdep.c (alphanbsd_gregset): Add REGSET_VARIABLE_SIZE
3786 * armbsd-tdep.c (armbsd_gregset): Likewise.
3787 * hppa-hpux-tdep.c (hppa_hpux_regset): Likewise.
3788 * hppaobsd-tdep.c (hppaobsd_gregset): Likewise.
3789 * m68kbsd-tdep.c (m68kbsd_gregset): Likewise.
3790 * mipsnbsd-tdep.c (mipsnbsd_gregset): Likewise.
3792 2015-02-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
3794 * amd64-linux-tdep.c (amd64_linux_iterate_over_regset_sections):
3795 For ".reg-xstate", explicitly specify the requested section size
3796 via X86_XSTATE_SIZE instead of just 0 on input and
3797 X86_XSTATE_MAX_SIZE on output.
3798 * i386-linux-tdep.c (i386_linux_iterate_over_regset_sections):
3801 2015-02-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
3804 * gdbarch.sh (iterate_over_regset_sections_cb): Document this
3805 function type, particularly its SIZE parameter.
3806 * gdbarch.h: Regenerate.
3807 * amd64-tdep.c (amd64_supply_fpregset): In gdb_assert, compare
3808 actual against required size using ">=" instead of "==".
3809 (amd64_collect_fpregset): Likewise.
3810 * i386-tdep.c (i386_supply_gregset): Likewise.
3811 (i386_collect_gregset): Likewise.
3812 (i386_supply_fpregset): Likewise.
3813 (i386_collect_fpregset): Likewise.
3814 * mips-linux-tdep.c (mips_supply_gregset_wrapper): Likewise.
3815 (mips_fill_gregset_wrapper): Likewise.
3816 (mips_supply_fpregset_wrapper): Likewise.
3817 (mips_fill_fpregset_wrapper): Likewise.
3818 (mips64_supply_gregset_wrapper): Likewise.
3819 (mips64_fill_gregset_wrapper): Likewise.
3820 (mips64_supply_fpregset_wrapper): Likewise.
3821 (mips64_fill_fpregset_wrapper): Likewise.
3822 * mn10300-linux-tdep.c (am33_supply_gregset_method): Likewise.
3823 (am33_supply_fpregset_method): Likewise.
3824 (am33_collect_gregset_method): Likewise.
3825 (am33_collect_fpregset_method): Likewise.
3827 2015-02-04 Doug Evans <dje@google.com>
3828 Pedro Alves <palves@redhat.com>
3829 Eli Zaretskii <eliz@gnu.org>
3832 * tui/tui-command.c (tui_refresh_cmd_win): New function.
3833 * tui/tui-command.c (tui_refresh_cmd_win): Declare.
3834 * tui/tui-file.c: #include tui/tui-command.h.
3835 (tui_file_fputs): Refresh command window if stream is not gdb_stdout.
3836 (tui_file_flush): Refresh command window if stream is gdb_stdout.
3837 * tui/tui-io.c (tui_puts): Remove calls to wrefresh, fflush.
3839 2015-02-04 Pedro Alves <palves@redhat.com>
3842 * event-loop.c (gdb_do_one_event): Add default switch case.
3844 2015-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
3846 Filter out inferior gcc option -fpreprocessed.
3847 * compile/compile.c (filter_args): New function.
3850 2015-02-03 Pedro Alves <palves@redhat.com>
3852 * event-loop.c: Don't declare nor define a queue type for
3854 (event_queue): Delete.
3855 (create_event, create_file_event, gdb_event_xfree)
3856 (initialize_event_loop, process_event): Delete.
3857 (gdb_do_one_event): Return as soon as one event is handled.
3858 (handle_file_event): Change prototype. Used the passed in
3859 file_handler pointer and ready_mask instead of looping over all
3861 (gdb_wait_for_event): Update the poll/select timeouts before
3862 blocking. Run event handlers directly instead of queueing events.
3863 Return as soon as one event is handled.
3864 (struct async_event_handler_data): Delete.
3865 (invoke_async_event_handler): Delete.
3866 (check_async_event_handlers): Change return type to int. Run
3867 event handlers directly instead of queueing events. Return as
3868 soon as one event is handled.
3869 (handle_timer_event): Delete.
3870 (update_wait_timeout): New function, factored out from
3872 (poll_timers): Reimplement.
3873 * event-loop.h (initialize_event_loop): Delete declaration.
3874 * top.c (gdb_init): Don't call initialize_event_loop.
3876 2015-02-03 Pedro Alves <palves@redhat.com>
3878 * event-loop.c (clear_async_event_handler): New function.
3879 * event-loop.h (clear_async_event_handler): New declaration.
3880 * record-btrace.c (record_btrace_async): New function.
3881 (init_record_btrace_ops): Install record_btrace_async.
3882 * record-full.c (record_full_async): New function.
3883 (record_full_resume): Don't mark the async event source here.
3884 (init_record_full_ops): Install record_full_async.
3885 (record_full_core_resume): Don't mark the async event source here.
3886 (init_record_full_core_ops): Install record_full_async.
3887 * remote.c (remote_async): Mark and clear the async stop reply
3888 queue event-loop token as appropriate.
3890 2015-02-03 Pedro Alves <palves@redhat.com>
3892 * linux-nat.c (linux_child_follow_fork, linux_nat_wait_1): Use
3893 target_is_async_p instead of target_can_async.
3894 (linux_nat_wait): Use target_is_async_p instead of
3895 target_can_async. Don't enable async here.
3896 * remote.c (interrupt_query, remote_wait, putpkt_binary): Use
3897 target_is_async_p instead of target_can_async.
3899 2015-02-02 Simon Marchi <simon.marchi@ericsson.com>
3901 * varobj.h (lang_varobj_ops): Mention which return values need
3904 2015-02-02 Joel Brobecker <brobecker@adacore.com>
3906 * dwarf2loc.c (dwarf2_evaluate_property): Add i18n marker.
3908 2015-02-02 Joel Brobecker <brobecker@adacore.com>
3911 * ada-lang.c (ada_lookup_symbol_list_worker): Do not re-cache
3912 results found in the cache.
3914 2015-02-02 Joel Brobecker <brobecker@adacore.com>
3917 * ada-lang.c (ada_get_symbol_cache): Set pspace_data->sym_cache
3918 when allocating a new one.
3920 2015-02-01 Tom Tromey <tom@tromey.com>
3922 * MAINTAINERS: Remove myself.
3924 2015-01-31 Doug Evans <xdje42@gmail.com>
3926 * dwarf2read.c (process_structure_scope): Update setting of
3927 TYPE_VPTR_BASETYPE, TYPE_VPTR_FIELDNO.
3928 * gdbtypes.c (internal_type_vptr_fieldno): New function.
3929 (set_type_vptr_fieldno): New function.
3930 (internal_type_vptr_basetype): New function.
3931 (set_type_vptr_basetype): New function.
3932 (get_vptr_fieldno): Update setting of TYPE_VPTR_FIELDNO,
3934 (allocate_cplus_struct_type): Initialize vptr_fieldno.
3935 (recursive_dump_type): Printing of vptr_fieldno, vptr_basetype ...
3936 (print_cplus_stuff): ... moved here.
3937 (copy_type_recursive): Don't copy TYPE_VPTR_BASETYPE.
3938 * gdbtypes.h (struct main_type): Members vptr_fieldno, vptr_basetype
3940 (struct cplus_struct_type): ... here. All uses updated.
3941 (TYPE_VPTR_FIELDNO, TYPE_VPTR_BASETYPE): Rewrite.
3942 (internal_type_vptr_fieldno, set_type_vptr_fieldno): Declare.
3943 (internal_type_vptr_basetype, set_type_vptr_basetype): Declare.
3944 * stabsread.c (read_tilde_fields): Update setting of
3945 TYPE_VPTR_FIELDNO, TYPE_VPTR_BASETYPE.
3947 2015-01-31 Doug Evans <xdje42@gmail.com>
3949 * cp-valprint.c (cp_find_class_member): Rename parameter domain_p
3951 (cp_print_class_member): Rename local domain to self_type.
3952 * dwarf2read.c (quirk_gcc_member_function_pointer): Rename local
3953 domain_type to self_type.
3954 (set_die_type) <need_gnat_info>: Handle
3955 TYPE_CODE_METHODPTR, TYPE_CODE_MEMBERPTR, TYPE_CODE_METHOD.
3956 * gdb-gdb.py (StructMainTypePrettyPrinter): Handle
3957 TYPE_SPECIFIC_SELF_TYPE.
3958 * gdbtypes.c (internal_type_self_type): New function.
3959 (set_type_self_type): New function.
3960 (smash_to_memberptr_type): Rename parameter domain to self_type.
3961 Update setting of TYPE_SELF_TYPE.
3962 (smash_to_methodptr_type): Update setting of TYPE_SELF_TYPE.
3963 (smash_to_method_type): Rename parameter domain to self_type.
3964 Update setting of TYPE_SELF_TYPE.
3965 (check_stub_method): Call smash_to_method_type.
3966 (recursive_dump_type): Handle TYPE_SPECIFIC_SELF_TYPE.
3967 (copy_type_recursive): Ditto.
3968 * gdbtypes.h (enum type_specific_kind): New value
3969 TYPE_SPECIFIC_SELF_TYPE.
3970 (struct main_type) <type_specific>: New member self_type.
3971 (struct cplus_struct_type) <fn_field.type>: Update comment.
3972 (TYPE_SELF_TYPE): Rewrite.
3973 (internal_type_self_type, set_type_self_type): Declare.
3974 * gnu-v3-abi.c (gnuv3_print_method_ptr): Rename local domain to
3976 (gnuv3_method_ptr_to_value): Rename local domain_type to self_type.
3977 * m2-typeprint.c (m2_range): Replace TYPE_SELF_TYPE with
3979 * stabsread.c (read_member_functions): Mark methods with
3980 TYPE_CODE_METHOD, not TYPE_CODE_FUNC. Update setting of
3983 2015-01-31 Doug Evans <xdje42@gmail.com>
3985 * gdbtypes.h (TYPE_SELF_TYPE): Renamed from TYPE_DOMAIN_TYPE.
3988 2015-01-31 Doug Evans <xdje42@gmail.com>
3990 * gnu-v3-abi.c (gnuv3_dynamic_class): Assert only passed structs
3991 or unions. Return zero if union.
3992 (gnuv3_get_vtable): Call check_typedef. Assert only passed structs.
3993 (gnuv3_rtti_type): Pass already-check_typedef'd value to
3995 (compute_vtable_size): Assert only passed structs.
3996 (gnuv3_print_vtable): Don't call gnuv3_get_vtable for non-structs.
3998 2015-01-31 Doug Evans <xdje42@gmail.com>
4000 * gdbtypes.c (copy_type_recursive): Handle all TYPE_SPECIFIC_FIELD
4003 2015-01-31 Gary Benson <gbenson@redhat.com>
4004 Doug Evans <dje@google.com>
4009 * cli/cli-cmds.c (complete_command): Notify user if max-completions
4011 * common/common-exceptions.h (enum errors)
4012 <MAX_COMPLETIONS_REACHED_ERROR>: New value.
4013 * completer.h (get_max_completions_reached_message): New declaration.
4014 (max_completions): Likewise.
4015 (completion_tracker_t): New typedef.
4016 (new_completion_tracker): New declaration.
4017 (make_cleanup_free_completion_tracker): Likewise.
4018 (maybe_add_completion_enum): New enum.
4019 (maybe_add_completion): New declaration.
4020 (throw_max_completions_reached_error): Likewise.
4021 * completer.c (max_completions): New global variable.
4022 (new_completion_tracker): New function.
4023 (free_completion_tracker): Likewise.
4024 (make_cleanup_free_completion_tracker): Likewise.
4025 (maybe_add_completions): Likewise.
4026 (throw_max_completions_reached_error): Likewise.
4027 (complete_line): Remove duplicates and limit result to max_completions
4029 (get_max_completions_reached_message): New function.
4030 (gdb_display_match_list): Handle max_completions.
4031 (_initialize_completer): New declaration and function.
4032 * symtab.c: Include completer.h.
4033 (completion_tracker): New static variable.
4034 (completion_list_add_name): Call maybe_add_completion.
4035 (default_make_symbol_completion_list_break_on_1): Renamed from
4036 default_make_symbol_completion_list_break_on. Maintain
4037 completion_tracker across calls to completion_list_add_name.
4038 (default_make_symbol_completion_list_break_on): New function.
4039 * top.c (init_main): Set rl_completion_display_matches_hook.
4040 * tui/tui-io.c: Include completer.h.
4041 (tui_old_rl_display_matches_hook): New static global.
4042 (tui_rl_display_match_list): Notify user if max-completions reached.
4043 (tui_setup_io): Save/restore rl_completion_display_matches_hook.
4044 * NEWS (New Options): Mention set/show max-completions.
4046 2015-01-31 Gary Benson <gbenson@redhat.com>
4048 * symtab.c (struct add_name_data) <code>: New field.
4050 (add_symtab_completions): New function.
4051 (symtab_expansion_callback): Likewise.
4052 (default_make_symbol_completion_list_break_on): Set datum.code.
4053 Move minimal symbol scan before calling expand_symtabs_matching.
4054 Scan known primary symtabs for externs and statics before calling
4055 expand_symtabs_matching. Pass symtab_expansion_callback as
4056 expansion_notify argument to expand_symtabs_matching. Do not scan
4057 primary symtabs for externs and statics after calling
4058 expand_symtabs_matching.
4060 2015-01-31 Gary Benson <gbenson@redhat.com>
4062 * symfile.h (expand_symtabs_exp_notify_ftype): New typedef.
4063 (struct quick_symbol_functions) <expand_symtabs_matching>:
4064 New argument expansion_notify. All uses updated.
4065 (expand_symtabs_matching): New argument expansion_notify.
4067 * symfile-debug.c (debug_qf_expand_symtabs_matching):
4068 Also print expansion notify.
4069 * symtab.c (expand_symtabs_matching_via_partial): Call
4070 expansion_notify whenever a partial symbol table is expanded.
4071 * dwarf2read.c (dw2_expand_symtabs_matching): Call
4072 expansion_notify whenever a symbol table is instantiated.
4074 2015-01-31 Doug Evans <xdje42@gmail.com>
4076 * cli-out.c: #include completer.h, readline/readline.h.
4077 (cli_mld_crlf, cli_mld_putch, cli_mld_puts): New functions.
4078 (cli_mld_flush, cld_mld_erase_entire_line): Ditto.
4079 (cli_mld_beep, cli_mld_read_key, cli_display_match_list): Ditto.
4080 * cli-out.h (cli_display_match_list): Declare.
4081 * completer.c (MB_INVALIDCH, MB_NULLWCH): New macros.
4082 (ELLIPSIS_LEN): Ditto.
4083 (gdb_get_y_or_n, gdb_display_match_list_pager): New functions.
4084 (gdb_path_isdir, gdb_printable_part, gdb_fnwidth): Ditto.
4085 (gdb_fnprint, gdb_print_filename): Ditto.
4086 (gdb_complete_get_screenwidth, gdb_display_match_list_1): Ditto.
4087 (gdb_display_match_list): Ditto.
4088 * completer.h (mld_crlf_ftype, mld_putch_ftype): New typedefs.
4089 (mld_puts_ftype, mld_flush_ftype, mld_erase_entire_line_ftype): Ditto.
4090 (mld_beep_ftype, mld_read_key_ftype): Ditto.
4091 (match_list_displayer): New struct.
4092 (gdb_display_match_list): Declare.
4093 * top.c (init_main): Set rl_completion_display_matches_hook.
4094 * tui/tui-io.c: #include completer.h.
4095 (printable_part, PUTX, print_filename, get_y_or_n): Delete.
4096 (tui_mld_crlf, tui_mld_putch, tui_mld_puts): New functions.
4097 (tui_mld_flush, tui_mld_erase_entire_line, tui_mld_beep): Ditto.
4098 (tui_mld_getc, tui_mld_read_key): Ditto.
4099 (tui_rl_display_match_list): Rewrite.
4100 (tui_handle_resize_during_io): New arg for_completion. All callers
4103 2015-01-31 Doug Evans <xdje42@gmail.com>
4105 Add symbol lookup cache.
4106 * NEWS: Document new options and commands.
4107 * symtab.c (symbol_cache_key): New static global.
4108 (DEFAULT_SYMBOL_CACHE_SIZE, MAX_SYMBOL_CACHE_SIZE): New macros.
4109 (SYMBOL_LOOKUP_FAILED): New macro.
4110 (symbol_cache_slot_state): New enum.
4111 (block_symbol_cache): New struct.
4112 (symbol_cache): New struct.
4113 (new_symbol_cache_size, symbol_cache_size): New static globals.
4114 (hash_symbol_entry, eq_symbol_entry): New functions.
4115 (symbol_cache_byte_size, resize_symbol_cache): New functions.
4116 (make_symbol_cache, free_symbol_cache): New functions.
4117 (get_symbol_cache, symbol_cache_cleanup): New function.
4118 (set_symbol_cache_size, set_symbol_cache_size_handler): New functions.
4119 (symbol_cache_lookup, symbol_cache_clear_slot): New function.
4120 (symbol_cache_mark_found, symbol_cache_mark_not_found): New functions.
4121 (symbol_cache_flush, symbol_cache_dump): New functions.
4122 (maintenance_print_symbol_cache): New function.
4123 (maintenance_flush_symbol_cache): New function.
4124 (symbol_cache_stats): New function.
4125 (maintenance_print_symbol_cache_statistics): New function.
4126 (symtab_new_objfile_observer): New function.
4127 (symtab_free_objfile_observer): New function.
4128 (lookup_static_symbol, lookup_global_symbol): Use symbol cache.
4129 (_initialize_symtab): Init symbol_cache_key. New parameter
4130 maint symbol-cache-size. New maint commands print symbol-cache,
4131 print symbol-cache-statistics, flush-symbol-cache.
4132 Install new_objfile, free_objfile observers.
4134 2015-01-31 Joel Brobecker <brobecker@adacore.com>
4137 * symfile.c (clear_symtab_users): Move call to breakpoint_re_set
4140 2015-01-31 Doug Evans <xdje42@gmail.com>
4142 * NEWS: Mention inlined scripts in .debug_gdb_scripts section.
4143 * auto-load.c: #include ctype.h.
4144 (struct auto_load_pspace_info): Replace member loaded_scripts with
4145 new members loaded_script_files, loaded_script_texts.
4146 (auto_load_pspace_data_cleanup): Update.
4147 (init_loaded_scripts_info): Update.
4148 (get_auto_load_pspace_data_for_loading): Update.
4149 (maybe_add_script_file): Renamed from maybe_add_script. All callers
4151 (maybe_add_script_text): New function.
4152 (clear_section_scripts): Update.
4153 (source_script_file, execute_script_contents): New functions.
4154 (source_section_scripts): Add support for
4155 SECTION_SCRIPT_ID_PYTHON_TEXT, SECTION_SCRIPT_ID_GUILE_TEXT.
4156 (print_scripts): New function.
4157 (auto_load_info_scripts): Also print inlined scripts.
4158 (maybe_print_unsupported_script_warning): Renamed from
4159 unsupported_script_warning_print. All callers updated.
4160 (maybe_print_script_not_found_warning): Renamed from
4161 script_not_found_warning_print. All callers updated.
4162 * extension-priv.h (struct extension_language_script_ops): New member
4163 objfile_script_executor.
4164 * extension.c (ext_lang_objfile_script_executor): New function.
4165 * extension.h (objfile_script_executor_func): New typedef.
4166 (ext_lang_objfile_script_executor): Declare.
4167 * guile/guile-internal.h (gdbscm_execute_objfile_script): Declare.
4168 * guile/guile.c (guile_extension_script_ops): Update.
4169 * guile/scm-objfile.c (gdbscm_execute_objfile_script): New function.
4170 * python/python.c (python_extension_script_ops): Update.
4171 (gdbpy_execute_objfile_script): New function.
4173 2015-01-31 Eli Zaretskii <eliz@gnu.org>
4175 * tui/tui-io.c (tui_expand_tabs): New function.
4176 (tui_puts, tui_redisplay_readline): Expand TABs into the
4177 appropriate number of spaces.
4178 * tui/tui-regs.c: Include tui-io.h.
4179 (tui_register_format): Call tui_expand_tabs to expand TABs into
4180 the appropriate number of spaces.
4181 * tui/tui-io.h: Add prototype for tui_expand_tabs.
4183 2015-01-30 Doug Evans <dje@google.com>
4185 * NEWS: "info source" command now display producer string if present.
4186 * source.c (source_info): Print producer string if present.
4188 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
4190 * varobj.c (varobj_delete): Fix comment.
4192 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
4194 * varobj.c (create_child): Modify comment.
4196 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
4198 * ada-varobj.c (ada_number_of_children): Constify struct varobj *
4200 (ada_name_of_variable): Same.
4201 (ada_path_expr_of_child): Same.
4202 (ada_value_of_variable): Same.
4203 (ada_value_is_changeable_p): Same.
4204 (ada_value_has_mutated): Same.
4205 * c-varobj.c (varobj_is_anonymous_child): Same.
4206 (c_is_path_expr_parent): Same.
4207 (c_number_of_children): Same.
4208 (c_name_of_variable): Same.
4209 (c_path_expr_of_child): Same.
4211 (c_value_of_variable): Same.
4212 (cplus_number_of_children): Same.
4213 (cplus_name_of_variable): Same.
4214 (cplus_path_expr_of_child): Same.
4215 (cplus_value_of_variable): Same.
4216 * jv-varobj.c (java_number_of_children): Same.
4217 (java_name_of_variable): Same.
4218 (java_path_expr_of_child): Same.
4219 (java_value_of_variable): Same.
4220 * varobj.c (number_of_children): Same.
4221 (name_of_variable): Same.
4223 (varobj_ensure_python_env): Same.
4224 (varobj_get_objname): Same.
4225 (varobj_get_expression): Same.
4226 (varobj_get_display_format): Same.
4227 (varobj_get_display_hint): Same.
4228 (varobj_has_more): Same.
4229 (varobj_get_thread_id): Same.
4230 (varobj_get_frozen): Same.
4231 (dynamic_varobj_has_child_method): Same.
4232 (varobj_get_gdb_type): Same.
4233 (is_path_expr_parent): Same.
4234 (varobj_default_is_path_expr_parent): Same.
4235 (varobj_get_language): Same.
4236 (varobj_get_attributes): Same.
4237 (varobj_is_dynamic_p): Same.
4238 (varobj_get_child_range): Same.
4239 (varobj_value_has_mutated): Same.
4240 (varobj_get_value_type): Same.
4241 (number_of_children): Same.
4242 (name_of_variable): Same.
4243 (check_scope): Same.
4244 (varobj_editable_p): Same.
4245 (varobj_value_is_changeable_p): Same.
4246 (varobj_floating_p): Same.
4247 (varobj_default_value_is_changeable_p): Same.
4249 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
4251 * varobj.c (varobj_get_path_expr): Set var->path_expr.
4252 * c-varobj.c (c_path_expr_of_child): Set local var instead of
4254 (cplus_path_expr_of_child): Same.
4256 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
4258 * mi-cmd-var.c (print_varobj): Free varobj_get_expression
4260 (mi_cmd_var_info_expression): Same.
4261 * varobj.c (varobj_get_expression): Mention in the comment that
4262 the result must by freed by the caller.
4264 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
4266 * mi/mi-cmd-var.c (mi_cmd_var_info_type): Free result of
4268 (varobj_update_one): Same.
4269 * varobj.c (update_type_if_necessary): Free curr_type_str and
4271 (varobj_get_type): Specify in comment that the result needs to be
4272 freed by the caller.
4274 2015-01-29 Doug Evans <dje@google.com>
4277 * dwarf2read.c (dwarf_decode_line_header): Punt if version > 4.
4279 2015-01-25 Mark Wielaard <mjw@redhat.com>
4281 * dwarf2read.c (checkproducer): Call producer_is_gcc.
4282 * utils.c (producer_is_gcc_ge_4): Likewise.
4283 (producer_is_gcc): New function.
4284 * utils.h (producer_is_gcc): New declaration.
4286 2015-01-29 Joel Brobecker <brobecker@adacore.com>
4288 * gdbtypes.h (struct dynamic_prop): New PROP_ADDR_OFFSET enum
4290 * gdbtypes.c (resolve_dynamic_type_internal): Replace "addr"
4291 parameter by "addr_stack" parameter.
4292 (resolve_dynamic_range): Replace "addr" parameter by
4293 "stack_addr" parameter. Update function documentation.
4294 Update code accordingly.
4295 (resolve_dynamic_array, resolve_dynamic_union)
4296 (resolve_dynamic_struct, resolve_dynamic_type_internal): Likewise.
4297 (resolve_dynamic_type): Update code, following the changes made
4298 to resolve_dynamic_type_internal's interface.
4299 * dwarf2loc.h (struct property_addr_info): New.
4300 (dwarf2_evaluate_property): Replace "address" parameter
4301 by "addr_stack" parameter. Adjust function documentation.
4302 (struct dwarf2_offset_baton): New.
4303 (struct dwarf2_property_baton): Update documentation of
4304 field "referenced_type" to be more general. New field
4305 "offset_info" in union data field.
4306 * dwarf2loc.c (dwarf2_evaluate_property): Replace "address"
4307 parameter by "addr_stack" parameter. Adjust code accordingly.
4308 Add support for PROP_ADDR_OFFSET properties.
4309 * dwarf2read.c (attr_to_dynamic_prop): Add support for
4310 DW_AT_data_member_location attributes as well. Use case
4311 statements instead of if/else condition.
4313 2015-01-29 Joel Brobecker <brobecker@adacore.com>
4315 * ada-varobj.c (ada_varobj_get_array_number_of_children):
4316 Return zero if PARENT_VALUE is NULL and parent_type's
4317 range type is dynamic.
4319 2015-01-29 Joel Brobecker <brobecker@adacore.com>
4321 * gdbtypes.c (is_dynamic_type_internal) <TYPE_CODE_RANGE>: Return
4322 nonzero if the type's subtype is dynamic.
4323 (resolve_dynamic_range): Also resolve the range's subtype.
4325 2015-01-29 Alexander Klimov <alserkli@inbox.ru> (tiny patch)
4327 Pushed by Joel Brobecker <brobecker@adacore.com>.
4328 * symfile.c (unmap_overlay_command): Initialize sec to NULL.
4330 2015-01-27 Doug Evans <dje@google.com>
4332 * NEWS: Mention gdb.Objfile.username.
4333 * python/py-objfile.c (objfpy_get_username): New function.
4334 (objfile_getset): Add "username".
4336 2015-01-24 Mark Wielaard <mjw@redhat.com>
4338 * stack.c (return_command): Markup warning message with _.
4340 2015-01-24 Doug Evans <xdje42@gmail.com>
4342 * gdbtypes.h (TYPE_TYPE_SPECIFIC): Delete.
4344 2015-01-24 Jan Kratochvil <jan.kratochvil@redhat.com>
4346 Fix 100x slowdown regression on DWZ files.
4347 * dwarf2read.c (struct dwarf2_per_objfile): Add line_header_hash.
4348 (struct line_header): Add offset and offset_in_dwz.
4349 (dwarf_decode_lines): Add parameter decode_mapping to the declaration.
4350 (free_line_header_voidp): New declaration.
4351 (line_header_hash, line_header_hash_voidp, line_header_eq_voidp): New
4353 (dwarf2_build_include_psymtabs): Update dwarf_decode_lines caller.
4354 (handle_DW_AT_stmt_list): Use line_header_hash.
4355 (free_line_header_voidp): New function.
4356 (dwarf_decode_line_header): Initialize offset and offset_in_dwz.
4357 (dwarf_decode_lines): New parameter decode_mapping, use it.
4358 (dwarf2_free_objfile): Free line_header_hash.
4360 2015-01-23 Simon Marchi <simon.marchi@ericsson.com>
4363 * valops.c (value_rtti_indirect_type): Catch exception thrown by
4366 2015-01-15 Mark Wielaard <mjw@redhat.com>
4368 * dwarf2read.c (read_subroutine_type): Set TYPE_NO_RETURN from
4370 * gdbtypes.h (struct func_type): Add is_noreturn field flag. Make
4371 calling_convention an 8 bit bit field.
4372 (TYPE_NO_RETURN): New macro.
4373 * infcmd.c (finish_command): Query if function does not return
4375 * stack.c (return_command): Likewise.
4377 2015-01-23 Pedro Alves <palves@redhat.com>
4379 * linux-nat.c (linux_is_async_p): New macro.
4380 (linux_nat_is_async_p):
4381 (linux_nat_terminal_inferior): Check whether the target can async
4382 instead of whether it is already async.
4383 (linux_nat_terminal_ours): Don't check whether the target is
4385 (linux_async_pipe): Use linux_is_async_p.
4387 2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
4389 * NEWS (Changes since GDB 7.9): Add 'thread apply all' option
4391 * thread.c (tp_array_compar_ascending, tp_array_compar): New.
4392 (thread_apply_all_command): Parse CMD for tp_array_compar_ascending.
4393 Sort tp_array using tp_array_compar.
4394 (_initialize_thread): Extend thread_apply_all_command help.
4396 2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
4398 * corelow.c (core_open): Call also thread_command.
4399 * gdbthread.h (thread_command): New prototype moved from ...
4400 * thread.c (thread_command): ... here.
4401 (thread_command): Make it global.
4403 2015-01-22 Pedro Alves <palves@redhat.com>
4405 * configure.ac [*mingw32*]: Check $curses_found instead of
4407 * configure: Regenerate.
4408 * windows-termcap.c: Remove HAVE_CURSES_H, HAVE_NCURSES_H and
4409 HAVE_NCURSES_NCURSES_H checks.
4411 2015-01-22 Eli Zaretskii <eliz@gnu.org>
4413 * tui/tui.c (tui_enable) [__MINGW32__]: If the call to 'newterm'
4414 fails with the 1st arg NULL, try again with "unknown". Don't test
4415 the "cup" capability: it isn't supported by the Windows port of
4416 ncurses, but the Windows console driver is still capable of
4419 2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
4421 * compile/compile.c (_initialize_compile): Use -fPIE for compile_args.
4423 2015-01-22 Eli Zaretskii <eliz@gnu.org>
4425 * Makefile.in (HFILES_NO_SRCDIR): Remove ada-varobj.h.
4426 (ALLDEPFILES): Remove irix5-nat.c. These two are part of the
4427 reason that "make TAGS" is broken.
4429 2015-01-22 Chen Gang <gang.chen.5i5j@gmail.com>
4431 * hppa-tdep.c (inst_saves_gr): Fix logical working flow issues
4432 and check additional store instructions.
4434 2015-01-21 Wei-cheng Wang <cole945@gmail.com>
4436 * MAINTAINERS (Write After Approval): Add "Wei-cheng Wang".
4438 2015-01-21 Wei-cheng Wang <cole945@gmail.com>
4440 * ppc-linux-tdep.c (ppc_skip_trampoline_code,
4441 ppc_canonicalize_syscall, ppc_linux_syscall_record,
4442 ppc_linux_record_signal, ppc_init_linux_record_tdep): Add comments.
4443 * ppc64-tdep.c (ppc64_skip_trampoline_code): Likewise.
4444 * rs6000-tdep.c (rs6000_epilogue_frame_cache,
4445 rs6000_epilogue_frame_this_id, rs6000_epilogue_frame_prev_register,
4446 rs6000_epilogue_frame_sniffer, ppc_record_vsr, ppc_process_record_op4,
4447 ppc_process_record_op19, ppc_process_record_op31,
4448 ppc_process_record_op59, ppc_process_record_op60,
4449 ppc_process_record_op63): Likewise.
4451 2015-01-20 Joel Brobecker <brobecker@adacore.com>
4453 * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason_string)
4454 (linux_ptrace_test_ret_to_nx): Use safe_strerror instead of
4457 2015-01-20 Wei-cheng Wang <cole945@gmail.com>
4459 * rs6000-tdep.c (ppc_process_record_op4, ppc_process_record_op19,
4460 ppc_process_record_op31, ppc_process_record_op59,
4461 ppc_process_record_op60, ppc_process_record_op63,
4462 ppc_process_record): Fix -Wformat warning.
4463 * rs6000-tdep.c (rs6000_epilogue_frame_cache, ppc_process_record_op60):
4464 Remove unused variables.
4466 2015-01-20 Chen Gang <gang.chen.5i5j@gmail.com>
4468 * MAINTAINERS (Write After Approval): Add "Chen Gang".
4470 2015-01-19 Eli Zaretskii <eliz@gnu.org>
4472 * configure.ac [*mingw32*]: Only add windows-termcap.o to
4473 CONFIG_OBS if not building with a curses library.
4474 * configure: Regenerate.
4476 * windows-termcap.c: Include defs.h. Make the whole body empty if
4477 either one of HAVE_CURSES_H or HAVE_NCURSES_H or
4478 HAVE_NCURSES_NCURSES_H is defined.
4480 2015-01-19 Joel Brobecker <brobecker@adacore.com>
4482 * rs6000-tdep.c (rs6000_gdbarch_init): Move divide operator
4483 from end of line to start of next line.
4485 2015-01-17 Wei-cheng Wang <cole945@gmail.com>
4487 * ppc-linux-tdep.c (ppc_skip_trampoline_code):
4488 Scan PLT stub backward for reverse debugging.
4489 * ppc64-tdep.c (ppc64_skip_trampoline_code): Likewise.
4491 2015-01-17 Wei-cheng Wang <cole945@gmail.com>
4492 Ulrich Weigand <uweigand@de.ibm.com>
4494 * configure.tgt (powerpc*-*-linux): Add linux-record.o to
4496 (ppc_linux_record_tdep, ppc64_linux_record_tdep): New for linux syscall
4498 (ppc_canonicalize_syscall, ppc_linux_syscall_record,
4499 ppc_linux_record_signal, ppc_init_linux_record_tdep): New functions.
4500 (ppc_linux_init_abi): Set process_record, process_record_signal.
4501 * ppc-tdep.h (struct gdbarch_tdep): Add ppc_syscall_record and
4502 ppc_linux_record_tdep to gdbarch_tdep.
4503 (ppc_process_record): New declaration.
4504 * rs6000-tdep.c (ppc_record_vsr, ppc_process_record_op4,
4505 ppc_process_record_op19, ppc_process_record_op31,
4506 ppc_process_record_op59, ppc_process_record_op60,
4507 ppc_process_record_op63, ppc_process_record): New functions.
4509 2015-01-17 Wei-cheng Wang <cole945@gmail.com>
4511 * rs6000-tdep.c (rs6000_in_function_epilogue_p): Rename to
4512 rs6000_in_function_epilogue_frame_p and add an argument
4514 (rs6000_epilogue_frame_cache, rs6000_epilogue_frame_this_id,
4515 rs6000_epilogue_frame_prev_register, rs6000_epilogue_frame_sniffer):
4517 (rs6000_epilogue_frame_unwind): New.
4518 (rs6000_gdbarch_init): Append epilogue unwinder.
4520 2015-01-16 Sergio Durigan Junior <sergiodj@redhat.com>
4522 * nat/linux-personality.c: Replace "#ifndef
4523 HAVE_DECL_ADDR_NO_RANDOMIZE" by "#if
4524 !HAVE_DECL_ADDR_NO_RANDOMIZE", fixing a regression in RHEL-5
4527 2015-01-16 Eli Zaretskii <eliz@gnu.org>
4529 * tui/tui-win.c (tui_rehighlight_all, tui_set_var_cmd): New
4531 (_initialize_tui_win) <border-kind, border-mode>:
4532 <active-border-mode>: Use tui_set_var_cmd as the "set" function.
4533 (tui_set_tab_width_command): Fix the commentary.
4535 * tui/tui-win.h: Add prototype for tui_rehighlight_all.
4537 * tui/tui-win.c (tui_scroll_left_command, tui_scroll_right_command):
4539 (tui_set_tab_width_command): Delete and recreate the source and
4540 the disassembly windows, to show the effect of the changed tab
4543 * tui/tui-data.h (LINE_PREFIX): Make shorter
4544 (MAX_PID_WIDTH): Enlarge from 14 to 19, to leave enough space for
4545 "Thread NNNNN.XXXX" thread ID notation on Windows.
4547 2015-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
4549 Fix gcc-5 compilation.
4550 * hppa-tdep.c (inst_saves_gr): Fix parentheses typo.
4552 2015-01-15 Sergio Durigan Junior <sergiodj@redhat.com>
4554 * Makefile.in (HFILES_NO_SRCDIR): Add nat/linux-personality.h.
4555 (linux-personality.o): New rule.
4556 * common/common-defs.h: Include <stdint.h>.
4557 * config/aarch64/linux.mh (NATDEPFILES): Include
4558 linux-personality.o.
4559 * config/alpha/alpha-linux.mh (NATDEPFILES): Likewise.
4560 * config/arm/linux.mh (NATDEPFILES): Likewise.
4561 * config/i386/linux64.mh (NATDEPFILES): Likewise.
4562 * config/i386/linux.mh (NATDEPFILES): Likewise.
4563 * config/ia64/linux.mh (NATDEPFILES): Likewise.
4564 * config/m32r/linux.mh (NATDEPFILES): Likewise.
4565 * config/m68k/linux.mh (NATDEPFILES): Likewise.
4566 * config/mips/linux.mh (NATDEPFILES): Likewise.
4567 * config/pa/linux.mh (NATDEPFILES): Likewise.
4568 * config/powerpc/linux.mh (NATDEPFILES): Likewise.
4569 * config/powerpc/ppc64-linux.mh (NATDEPFILES): Likewise.
4570 * config/powerpc/spu-linux.mh (NATDEPFILES): Likewise.
4571 * config/s390/linux.mh (NATDEPFILES): Likewise.
4572 * config/sparc/linux64.mh (NATDEPFILES): Likewise.
4573 * config/sparc/linux.mh (NATDEPFILES): Likewise.
4574 * config/tilegx/linux.mh (NATDEPFILES): Likewise.
4575 * config/xtensa/linux.mh (NATDEPFILES): Likewise.
4576 * defs.h: Remove #include <stdint.h> (moved to
4577 common/common-defs.h).
4578 * linux-nat.c: Include nat/linux-personality.h. Remove #include
4579 <sys/personality.h>; do not define ADDR_NO_RANDOMIZE (moved to
4580 nat/linux-personality.c).
4581 (linux_nat_create_inferior): Remove code to disable address space
4582 randomization (moved to nat/linux-personality.c). Create cleanup
4583 to disable address space randomization.
4584 * nat/linux-personality.c: New file.
4585 * nat/linux-personality.h: Likewise.
4587 2015-01-15 Sergio Durigan Junior <sergiodj@redhat.com>
4589 * Makefile.in (ALLDEPFILES): Including common/mingw-strerror.c and
4590 common/posix-strerror.c.
4591 (posix-strerror.o): New rule.
4592 (mingw-strerror.o): Likewise.
4593 * common/common-utils.h (safe_strerror): Move prototype to here,
4595 * common/common.host: New file.
4596 * common/mingw-strerror.c: Likewise.
4597 * common/posix-strerror.c: Likewise.
4598 * configure: Regenerated.
4599 * configure.ac: Source common/common.host. Add variable
4600 common_host_obs to gdb_host_obs.
4601 * contrib/ari/gdb_ari.sh: Mention gdb/common/mingw-strerror.c and
4602 gdb/common/posix-strerror.c when warning about the use of
4604 * mingw-hdep.c (safe_strerror): Remove definition; move it to
4605 common/mingw-strerror.c.
4606 * posix-hdep.c (safe_strerror): Remove definition; move it to
4607 common/posix-hdep.c.
4608 * utils.h (safe_strerror): Remove prototype; move to
4609 common/common-utils.h.
4611 2015-01-15 Joel Brobecker <brobecker@adacore.com>
4615 2015-01-15 Joel Brobecker <brobecker@adacore.com>
4617 * ada-lang.c (ada_array_bound_from_type): Ignore array's parallel
4618 ___XA type if the array has already been fixed.
4620 2015-01-14 Yao Qi <yao@codesourcery.com>
4622 * Makefile.in (ppc-linux.o): New rule.
4623 * config/powerpc/ppc64-linux.mh (NATDEPFILES): Add ppc-linux.o.
4624 * configure.ac: AC_CHECK_FUNCS(getauxval).
4625 * config.in: Re-generated.
4626 * configure: Re-generated.
4627 * nat/ppc-linux.h [__powerpc64__] (ppc64_64bit_inferior_p):
4629 * nat/ppc-linux.c: New file.
4630 * ppc-linux-nat.c (ppc_linux_target_wordsize) [__powerpc64__]:
4631 Call ppc64_64bit_inferior_p.
4633 2015-01-14 Yao Qi <yao@codesourcery.com>
4635 * ppc-linux-nat.c (PT_ORIG_R3, PT_TRAP): Move to
4637 (PPC_FEATURE_CELL, PPC_FEATURE_BOOKE): Likewise.
4638 (PPC_FEATURE_HAS_DFP): Likewise.
4639 (PTRACE_GETVRREGS, PTRACE_SETVRREGS): Likewise.
4640 (PTRACE_GETVSXREGS, PTRACE_SETVSXREGS): Likewise.
4641 (PTRACE_GETEVRREGS, PTRACE_SETEVRREGS): Likewise.
4642 Include "nat/ppc-linux.h".
4643 * nat/ppc-linux.h: New file.
4644 * Makefile.in (HFILES_NO_SRCDIR): Add nat/ppc-linux.h.
4646 2015-01-14 Pedro Alves <palves@redhat.com>
4649 * breakpoint.c: Include "interps.h".
4650 (bpstat_do_actions_1): Also check whether the interpreter is
4653 2015-01-14 Pedro Alves <palves@redhat.com>
4656 * infrun.c (reinstall_readline_callback_handler_cleanup): Don't
4657 reinstall if the interpreter is sync.
4659 2015-01-13 Doug Evans <dje@google.com>
4661 * objfiles.c (objfile_filename): New function.
4662 * objfiles.h (objfile_filename): Declare it.
4663 (objfile_name): Add function comment.
4664 * python/py-objfile.c (objfpy_lookup_objfile_by_name): Try both the
4665 bfd file name (which may be realpath'd), and the original name.
4667 2015-01-13 Joel Brobecker <brobecker@adacore.com>
4669 * NEWS: Create a new section for the next release branch.
4670 Rename the section of the current branch, now that it has
4673 2015-01-13 Joel Brobecker <brobecker@adacore.com>
4675 GDB 7.9 branch created (92fc2e6978d9a7c8324c7e851dbee59e22ec7a37):
4676 * version.in: Bump version to 7.9.50.DATE-cvs.
4678 2015-01-13 Joel Brobecker <brobecker@adacore.com>
4680 * nat/linux-procfs.c (linux_proc_attach_tgid_threads):
4681 Remove trailing new-line in argument of call to warning.
4683 2015-01-13 Joel Brobecker <brobecker@adacore.com>
4685 * linux-nat.c (attach_proc_task_lwp_callback): Remove trailing
4686 new-line in argument of call to "warning".
4688 2015-01-13 Joel Brobecker <brobecker@adacore.com>
4690 * ada-lang.c (ada_lookup_symbol_nonlocal): If name not found
4691 in static block, then try searching for primitive types.
4693 2015-01-12 Patrick Palka <patrick@parcs.ath.cx>
4695 * top.h (gdb_add_history): Declare.
4696 * top.c (command_count): New variable.
4697 (gdb_add_history): New function.
4698 (gdb_safe_append_history): New static function.
4699 (quit_force): Call it.
4700 (command_line_input): Use gdb_add_history instead of
4702 * event-top.c (command_line_handler): Likewise.
4704 2015-01-12 James Clarke <jrtc27@jrtc27.com> (tiny patch)
4707 * darwin-nat.c: Replace <machine/setjmp.h> #include by
4708 <setjmp.h> #include.
4710 2015-01-11 Doug Evans <xdje42@gmail.com>
4712 * dwarf2read.c (compute_delayed_physnames): Use TYPE_FN_FIELD_PHYSNAME.
4714 2015-01-11 Doug Evans <xdje42@gmail.com>
4717 * NEWS: The "maint demangle" command is renamed as "demangle".
4718 * demangle.c: #include cli/cli-utils.h, language.h.
4719 (demangle_command): New function.
4720 (_initialize_demangle): Add new command "demangle".
4721 * maint.c (maintenance_demangle): Stub out.
4722 (_initialize_maint_cmds): Update help text for "maint demangle",
4723 and mark as deprecated.
4725 2015-01-11 Mark Kettenis <kettenis@gnu.org>
4727 * inf-ptrace.c (inf_ptrace_follow_fork): Adjust now that
4728 inferior_thread is a function.
4730 2015-01-09 Patrick Palka <patrick@parcs.ath.cx>
4732 * Makefile.in (.y.c): Don't munge yacc's #line
4735 2015-01-09 Patrick Palka <patrick@parcs.ath.cx>
4737 * utils.c (defaulted_query): Rewrite to use gdb_readline_wrapper
4738 to prompt for input.
4739 * tui/tui-hooks.c (tui_query_hook): Remove.
4740 (tui_install_hooks): Don't set deprecated_query_hook.
4741 * tui/tui-io.c (tui_redisplay_readline): Fix off-by-one error in
4742 height calculation. Always update the command window's cur_line.
4744 2015-01-09 Pedro Alves <palves@redhat.com>
4746 * breakpoint.c (hardware_breakpoint_inserted_here_p): New
4748 * breakpoint.h (hardware_breakpoint_inserted_here_p): New
4750 * linux-nat.c (linux_nat_status_is_event): Move higher up in file.
4751 (linux_resume_one_lwp): Store the thread's PC. Adjust to clear
4753 (check_stopped_by_watchpoint): New function.
4754 (save_sigtrap): Reimplement.
4755 (linux_nat_stopped_by_watchpoint): Adjust.
4756 (linux_nat_lp_status_is_event): Delete.
4757 (stop_wait_callback): Only call save_sigtrap after storing the
4759 (status_callback): If the thread had been stopped for a breakpoint
4760 that has since been removed, discard the event and resume the LWP.
4761 (count_events_callback, select_event_lwp_callback): Use
4762 lwp_status_pending_p instead of linux_nat_lp_status_is_event.
4763 (cancel_breakpoint): Rename to ...
4764 (check_stopped_by_breakpoint): ... this. Record whether the LWP
4765 stopped for a software breakpoint or hardware breakpoint.
4766 (select_event_lwp): Only give preference to the stepping LWP in
4767 all-stop mode. Adjust comments.
4768 (stop_and_resume_callback): Remove references to new_pending_p.
4769 (linux_nat_filter_event): Likewise. Leave exit events of the
4770 leader thread pending here. Handle signal short circuiting here.
4771 Only call save_sigtrap after storing the pending waitstatus.
4772 (linux_nat_wait_1): Remove 'retry' label. Remove references to
4773 new_pending. Don't handle leaving events the caller is not
4774 interested in pending here, nor handle signal short-circuiting
4775 here. Also give equal priority to all LWPs that have had events
4776 in non-stop mode. If reporting a software breakpoint event,
4777 unadjust the LWP's PC.
4778 * linux-nat.h (enum lwp_stop_reason): New.
4779 (struct lwp_info) <stop_pc>: New field.
4780 (struct lwp_info) <stopped_by_watchpoint>: Delete field.
4781 (struct lwp_info) <stop_reason>: New field.
4782 * x86-linux-nat.c (x86_linux_prepare_to_resume): Adjust.
4784 2015-01-09 Pedro Alves <palves@redhat.com>
4786 * linux-nat.c (linux_handle_extended_wait) <PTRACE_EVENT_EXEC>:
4787 Set the LWP's 'resumed' flag.
4789 2015-01-09 Pedro Alves <palves@redhat.com>
4791 * linux-nat.c (linux_resume_one_lwp): New function.
4792 (resume_lwp): Use lwp_status_pending_p and linux_resume_one_lwp.
4793 (linux_nat_resume): Use lwp_status_pending_p and
4794 linux_resume_one_lwp.
4795 (linux_handle_syscall_trap): Use linux_resume_one_lwp.
4796 (linux_handle_extended_wait): Use linux_resume_one_lwp.
4797 (status_callback, running_callback): Use lwp_status_pending_p.
4798 (lwp_status_pending_p): New function.
4799 (stop_and_resume_callback): Use lwp_status_pending_p.
4800 (linux_nat_filter_event): Use linux_resume_one_lwp.
4801 (linux_nat_wait_1): Always use status_callback to look for an LWP
4802 with a pending status. Use linux_resume_one_lwp.
4803 (resume_stopped_resumed_lwps): Use lwp_status_pending_p and
4804 linux_resume_one_lwp.
4806 2015-01-09 Pedro Alves <palves@redhat.com>
4808 * breakpoint.c (bp_location_inserted_here_p): New function,
4809 factored out from ...
4810 (breakpoint_inserted_here_p): ... here. Use
4811 ALL_BP_LOCATIONS_AT_ADDR.
4812 (software_breakpoint_inserted_here_p): Use
4813 bp_location_inserted_here_p and ALL_BP_LOCATIONS_AT_ADDR.
4815 2014-01-09 Pedro Alves <palves@redhat.com>
4817 Skip enabling event reporting if the kernel supports
4819 * linux-thread-db.c: Include "nat/linux-ptrace.h".
4820 (thread_db_use_events): New function.
4821 (try_thread_db_load_1): Check thread_db_use_events before enabling
4823 (update_thread_state): New function.
4824 (attach_thread): Use it. Check thread_db_use_events before
4825 enabling event reporting.
4826 (thread_db_detach): Check thread_db_use_events before disabling
4828 (find_new_threads_callback): Check thread_db_use_events before
4829 enabling event reporting. Update the thread's state if not using
4830 libthread_db events.
4832 2015-01-09 Pedro Alves <palves@redhat.com>
4834 * linux-nat.c (lin_lwp_attach_lwp): Assert that the lwp id we're
4835 about to wait for is > 0.
4836 * linux-thread-db.c (find_new_threads_callback): Ignore thread if
4837 the kernel thread ID is -1.
4839 2015-01-09 Pedro Alves <palves@redhat.com>
4841 * linux-nat.c (attach_proc_task_lwp_callback): New function.
4842 (linux_nat_attach): Use linux_proc_attach_tgid_threads.
4843 (wait_lwp, linux_nat_filter_event): If not set yet, set the lwp's
4844 ptrace option flags.
4845 * linux-nat.h (struct lwp_info) <must_set_ptrace_flags>: New
4847 * nat/linux-procfs.c: Include <dirent.h>.
4848 (linux_proc_get_int): New parameter "warn". Handle it.
4849 (linux_proc_get_tgid): Adjust.
4850 (linux_proc_get_tracerpid): Rename to ...
4851 (linux_proc_get_tracerpid_nowarn): ... this.
4852 (linux_proc_pid_get_state): New function, factored out from
4853 (linux_proc_pid_has_state): ... this. Add new parameter "warn"
4855 (linux_proc_pid_is_gone): New function.
4856 (linux_proc_pid_is_stopped): Adjust.
4857 (linux_proc_pid_is_zombie_maybe_warn)
4858 (linux_proc_pid_is_zombie_nowarn): New functions.
4859 (linux_proc_pid_is_zombie): Use
4860 linux_proc_pid_is_zombie_maybe_warn.
4861 (linux_proc_attach_tgid_threads): New function.
4862 * nat/linux-procfs.h (linux_proc_get_tgid): Update comment.
4863 (linux_proc_get_tracerpid): Rename to ...
4864 (linux_proc_get_tracerpid_nowarn): ... this, and update comment.
4865 (linux_proc_pid_is_gone): New declaration.
4866 (linux_proc_pid_is_zombie): Update comment.
4867 (linux_proc_pid_is_zombie_nowarn): New declaration.
4868 (linux_proc_attach_lwp_func): New typedef.
4869 (linux_proc_attach_tgid_threads): New declaration.
4870 * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason): Adjust to
4871 use nowarn functions.
4872 (linux_ptrace_attach_fail_reason_string): Move here from
4873 gdbserver/linux-low.c and rename.
4874 (ptrace_supports_feature): If the current ptrace options are not
4875 known yet, check them now, instead of asserting.
4876 * nat/linux-ptrace.h (linux_ptrace_attach_fail_reason_string):
4879 2015-01-09 Pedro Alves <palves@redhat.com>
4881 * linux-thread-db.c (thread_db_find_new_threads_silently)
4882 (try_thread_db_load_1, try_thread_db_load, thread_db_load_search)
4883 (find_new_threads_once): Print debug output on gdb_stdlog.
4885 2015-01-09 Chen Gang <gang.chen.5i5j@gmail.com>
4886 Pedro Alves <palves@redhat.com>
4888 * compile/compile.c: Include "gdb_wait.h".
4889 (do_rmdir): Check return value, and free 'zap'.
4891 2015-01-08 Pedro Alves <palves@redhat.com>
4892 Yao Qi <yao@codesourcery.com>
4894 * dwarf2loc.c (indirect_pieced_value): Don't call
4895 gdb_sign_extend. Call extract_signed_integer instead.
4896 * utils.c (gdb_sign_extend): Remove.
4897 * utils.h (gdb_sign_extend): Remove declaration.
4899 2015-01-07 Pierre Muller <muller@sourceware.org>
4902 * stabsread.c (define_symbol): Set language for C++ special symbols.
4904 2015-01-07 Patrick Palka <patrick@parcs.ath.cx>
4906 * inflow.c (initial_gdb_ttystate): Tweak comment.
4908 2015-01-07 Joel Brobecker <brobecker@adacore.com>
4910 * inflow.c (set_initial_gdb_ttystate): Add empty line after
4911 comment documenting function.
4913 2015-01-07 Patrick Palka <patrick@parcs.ath.cx>
4915 * terminal.h (set_initial_gdb_ttystate): Declare.
4916 * inflow.c (initial_gdb_ttystate): New static variable.
4917 (set_initial_gdb_ttystate): New setter.
4918 (child_terminal_init_with_pgrp): Copy initial_gdb_ttystate
4919 instead of our current terminal state.
4920 * top.c (gdb_init): Call set_initial_gdb_ttystate.
4922 2015-01-07 Joel Brobecker <brobecker@adacore.com>
4924 * guile/scm-type.c (tyscm_array_1): Add comment.
4925 * python/py-type.c (typy_array_1): Add comment.
4927 2015-01-06 Joel Brobecker <brobecker@adacore.com>
4929 * guile/scm-type.c (tyscm_array_1): Do not raise out-of-range
4930 error if N2 is equal to N1 - 1.
4932 2015-01-06 Joel Brobecker <brobecker@adacore.com>
4934 * python/py-type.c (typy_array_1): Do not raise negative-length
4935 exception if N2 is equal to N1 - 1.
4937 2015-01-03 Doug Evans <xdje42@gmail.com>
4939 * c-exp.y: Whitespace cleanup.
4940 (classify_inner_name): Remove extra ;.
4942 2015-01-02 Maciej W. Rozycki <macro@codesourcery.com>
4944 * mips-tdep.c (mips32_scan_prologue): Keep the extracted stack
4947 2015-01-02 Doug Evans <dje@google.com>
4949 * dwarf2read.c (setup_type_unit_groups): Remove outdated comment.
4951 2015-01-02 Doug Evans <dje@google.com>
4953 * symtab.h (struct symbol): Fix typo in comment.
4955 2015-01-01 Joel Brobecker <brobecker@adacore.com>
4957 Update year range in copyright notice of all files.
4959 2015-01-01 Joel Brobecker <brobecker@adacore.com>
4961 * top.c (print_gdb_version): Update copyright year to 2015.
4963 2015-01-01 Joel Brobecker <brobecker@adacore.com>
4965 * config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2014.
4967 For older changes see ChangeLog-2014.
4973 version-control: never