1 2015-06-23 Patrick Palka <patrick@parcs.ath.cx>
3 * top.c (init_history): Look at errno after calling strtol to
4 properly map large GDBHISTSIZE values to infinity.
6 2015-06-23 Doug Evans <dje@google.com>
8 * inferior.h (struct inferior_suspend_state): Delete, unused.
9 All references deleted.
11 2015-06-23 Mike Frysinger <vapier@gentoo.org>
13 * microblaze-tdep.c (microblaze_push_dummy_code): Delete.
14 (microblaze_push_dummy_call): Likewise.
15 (microblaze_gdbarch_init): Delete calls to set_gdbarch_push_dummy_code
16 and set_gdbarch_push_dummy_call.
18 2015-06-23 Yao Qi <yao.qi@linaro.org>
20 * amd64-linux-nat.c (amd64_linux_fetch_inferior_registers):
21 Check whether have_ptrace_getregset is TRIBOOL_TRUE explicitly.
22 (amd64_linux_store_inferior_registers): Likewise.
23 * arm-linux-nat.c (fetch_fpregister): Likewise.
24 (fetch_fpregs, store_fpregister): Likewise.
25 (store_fpregister, store_fpregs): Likewise.
26 (fetch_register, fetch_regs): Likewise.
27 (store_register, store_regs): Likewise.
28 (fetch_vfp_regs, store_vfp_regs): Likewise.
29 (arm_linux_read_description): Check have_ptrace_getregset is
30 TRIBOOL_UNKNOWN. Set have_ptrace_getregset to TRIBOOL_TRUE
32 * i386-linux-nat.c (fetch_xstateregs): Check
33 have_ptrace_getregset is not TRIBOOL_TRUE.
34 (store_xstateregs): Likewise.
35 * linux-nat.c (have_ptrace_getregset): Change its type to
37 * linux-nat.h (tribool): New enum.
38 * x86-linux-nat.c (x86_linux_read_description): Use enum tribool.
39 Check whether have_ptrace_getregset is TRIBOOL_TRUE.
41 2015-06-19 Doug Evans <dje@google.com>
43 * NEWS: Mention Sun's version of stabs is no longer supported.
44 * elfread.c (free_elfinfo): Delete. All uses updated.
45 (elfstab_offset_sections): Delete. All uses updated.
46 * gdb-stabs.h (stab_section_info): Delete. All uses updated.
47 * psympriv.h (partial_symtab) <section_offsets>: Delete.
49 * psymtab.c (start_psymtab_common): Delete arg section_offsets.
52 2015-06-18 Simon Marchi <simon.marchi@ericsson.com>
54 * common/rsp-low.c (needs_escaping): New.
55 (remote_escape_output): Add unit_size parameter. Refactor to
56 support multi-byte addressable units. Rename parameters.
57 * common/rsp-low.h (remote_escape_output): Add unit_size
58 parameter and rename others. Update doc.
59 * remote.c (align_for_efficient_write): New.
60 (remote_write_bytes_aux): Add unit_size parameter and use it.
61 Rename some variables. Update doc.
62 (remote_xfer_partial): Get unit size and use it.
63 (remote_read_bytes_1): Add unit_size parameter and use it.
64 Rename some variables. Update doc.
65 (remote_write_bytes): Same.
66 (remote_xfer_live_readonly_partial): Same.
67 (remote_read_bytes): Same.
68 (remote_flash_write): Update call to remote_write_bytes_aux.
69 (remote_write_qxfer): Update call to remote_escape_output.
70 (remote_search_memory): Same.
71 (remote_hostio_pwrite): Same.
73 2015-06-17 Luis Machado <lgustavo@codesourcery.com>
75 * breakpoint.c (add_location_to_breakpoint): Don't mark permanent
76 locations as inserted.
77 Update and expand comment about permanent locations.
78 (bp_loc_is_permanent): Don't return 0 for bp_call_dummy.
79 Move comment to add_location_to_breakpoint.
80 (update_global_location_list): Don't error out if a permanent
81 breakpoint is not marked inserted.
82 Don't error out if a non-permanent breakpoint location is inserted on
83 top of a permanent breakpoint.
85 2015-06-17 Luis Machado <lgustavo@codesourcery.com>
87 * breakpoint.c (make_breakpoint_permanent): Remove unused
89 * breakpoint.h (make_breakpoint_permanent): Remove declaration.
91 2015-06-17 Patrick Palka <patrick@parcs.ath.cx>
94 * NEWS: Mention new GDBHISTSIZE behavior.
95 * top.c (init_history): For null or out-of-range GDBHISTSIZE,
96 set history size to unlimited. Ignore non-numeric GDBHISTSIZE.
98 2015-06-17 Patrick Palka <patrick@parcs.ath.cx>
100 * NEWS: Mention that GDBHISTSIZE is read instead of HISTSIZE.
101 * top.c (init_history): Read from GDBHISTSIZE instead of
103 (init_main): Refer to GDBHISTSIZE instead of HISTSIZE.
105 2015-06-17 Patrick Palka <patrick@parcs.ath.cx>
107 * top.c (gdb_safe_append_history): Do not call
108 history_truncate_file if the history is not stifled.
110 2015-06-17 Andreas Arnez <arnez@linux.vnet.ibm.com>
112 * syscalls/s390-linux.xml: Add syscalls 344 through 354.
113 * syscalls/s390x-linux.xml: Likewise.
115 2015-06-16 Michael Eager <eager@eagercon.com>
117 * nat/linux-namespaces.c (MSG_CMSG_CLOEXEC): Define if not defined.
119 2015-06-16 Patrick Palka <patrick@parcs.ath.cx>
121 * tui/tui-hooks.c (tui_selected_frame_level_changed_hook): Call
122 target_terminal_ours_for_output() before calling
123 tui_show_frame_info(), and restore the original terminal
126 2015-06-16 Martin Simmons <martin@lispworks.com> (tiny patch)
128 * arm-linux-nat.c: Include nat/linux-ptrace.h.
130 2015-06-15 Simon Marchi <simon.marchi@ericsson.com>
132 * mi/mi-main.c (mi_cmd_data_read_memory_bytes): Consider addressable
134 (mi_cmd_data_write_memory_bytes): Same.
136 2015-06-15 Simon Marchi <simon.marchi@ericsson.com>
138 * corefile.c (write_memory): Update doc.
139 * gdbcore.h (write_memory): Same.
141 2015-06-15 Jan Kratochvil <jan.kratochvil@redhat.com>
143 * linux-tdep.c (enum filterflags): Make it from anonymous enum.
144 (dump_mapping_p): Use it for parameter filterflags.
145 (linux_find_memory_regions_full): Use it for variable filterflags.
147 2015-06-15 Aleksandar Ristovski <aristovski@qnx.com
148 Jan Kratochvil <jan.kratochvil@redhat.com>
150 Merge multiple hex conversions.
151 * monitor.c: Include rsp-low.h.
152 (fromhex): Remove definition.
154 2015-06-15 Aleksandar Ristovski <aristovski@qnx.com
155 Jan Kratochvil <jan.kratochvil@redhat.com>
157 Move utility functions to common/.
158 * cli/cli-utils.c (skip_spaces, skip_spaces_const, skip_to_space_const):
159 Move defs to common/common-utils.c.
160 * cli/cli-utils.h (skip_spaces, skip_spaces_const, skip_to_space)
161 (skip_to_space_const): Move decls to common/common-utils.h.
162 * common/common-defs.h: Move include of common-types.h before
164 * common/common-utils.c: Include host-defs.h and ctype.h.
165 (HIGH_BYTE_POSN, is_digit_in_base, digit_to_int, strtoulst): Move
167 (skip_spaces, skip_spaces_const, skip_to_space_const): Move from
169 * common/common-utils.h (strtoulst): Move decl from utils.h.
170 (skip_spaces, skip_spaces_const, skip_to_space, skip_to_space_const):
171 Move from cli/cli-utils.h.
172 * common/host-defs.h: Include limits.h.
173 (TARGET_CHAR_BIT, HOST_CHAR_BIT): Moved from defs.h.
174 (skip_spaces, skip_spaces_const): Move decls from cli/cli-utils.h.
175 * defs.h (TARGET_CHAR_BIT, HOST_CHAR_BIT): Move to
176 common/common-utils.h.
177 * utils.c (HIGH_BYTE_POSN, is_digit_in_base, digit_to_int)
178 (strtoulst): Move to common/common-utils.c.
179 * utils.h (strtoulst): Moved decl to common/common-utils.h.
181 2015-06-15 Yao Qi <yao.qi@linaro.org>
183 * data-directory/Makefile.in (SYSCALLS_FILES): Add aarch64-linux.xml.
185 2015-06-10 Jon Turney <jon.turney@dronecode.org.uk>
187 * build-id.c: Don't include elf-bfd.h.
188 (build_id_bfd_get): Use bfd_build_id.
189 (build_id_verify): Ditto.
191 (find_separate_debug_file_by_buildid): Ditto.
192 * python/py-objfile.c: Don't include elf-bfd.h.
193 (objfpy_get_build_id) Use bfd_build_id.
194 (objfpy_build_id_matches, objfpy_lookup_objfile_by_build_id): Ditto.
195 * coffread.c: Include build-id.h.
196 (coff_symfile_read): Try find_separate_debug_file_by_buildid.
198 2015-06-03 Jon Turney <jon.turney@dronecode.org.uk>
200 * windows-nat.c (do_windows_fetch_inferior_registers)
201 (handle_output_debug_string): Replace __COPY_CONTEXT_SIZE
202 conditional with __CYGWIN__.
204 2015-06-13 Andrew Burgess <andrew.burgess@embecosm.com>
206 * completer.c: Add arch-utils.h include.
207 (enum reg_completer_targets): New enum.
208 (reg_or_group_completer_1): New function containing old
209 reg_or_group_completer, add and use new parameter to control what
210 is completed on. Use get_current_arch rather than architecture of
211 currently selected frame.
212 (reg_or_group_completer): Call new reg_or_group_completer_1.
213 (reggroup_completer): Call new reg_or_group_completer_1.
214 * completer.h (reggroup_completer): Add declaration.
215 * tui/tui-regs.c: Add 'completer.h' include.
216 (tui_reg_next_command): Renamed to...
217 (tui_reg_next): ...this. Adjust parameters and return rather than
219 (tui_reg_prev_command): Renamed to...
220 (tui_reg_prev): ...this. Adjust parameters and return rather than
222 (tui_reg_float_command): Delete.
223 (tui_reg_general_command): Delete.
224 (tui_reg_system_command): Delete.
225 (tui_reg_command): Rewrite to perform switching of register group.
227 (tuireglist): Remove.
228 (tui_reggroup_completer): New function.
229 (_initialize_tui_regs): Remove 'tui reg' sub-commands, update
230 creation of 'tui reg' command.
231 * NEWS: Add comment about 'tui reg' changes.
233 2015-06-12 Simon Marchi <simon.marchi@ericsson.com>
235 * target.c (target_read): Consider addressable unit size when
236 reading from a memory object.
237 (read_memory_robust): Same.
238 (read_whatever_is_readable): Same.
239 (target_write_with_progress): Consider addressable unit size
240 when writing to a memory object.
241 * target.h (target_read): Update documentation.
242 (target_write): Add documentation.
244 2015-06-12 Simon Marchi <simon.marchi@ericsson.com>
246 * arch-utils.h (default_addressable_memory_unit_size): New.
247 * arch-utils.c (default_addressable_memory_unit_size): New.
248 * gdbarch.sh (addressable_memory_unit_size): New.
249 * gdbarch.h: Re-generate.
250 * gdbarch.c: Re-generate.
252 2015-06-12 Simon Marchi <simon.marchi@ericsson.com>
254 * target.c (target_read): Rename variables and use
256 (target_read_with_progress): Same.
257 (read_memory_robust): Constify parameters and rename
259 (read_whatever_is_readable): Constify parameters,
260 rename variables, adjust formatting.
261 * target.h (read_memory_robust): Constify parameters.
263 2015-06-12 Ulrich Weigand <uweigand@de.ibm.com>
265 * ppc-sysv-tdep.c (ppc64_sysv_abi_return_value_base): Handle short
266 synthetic (non-AltiVec) vector types.
267 (ppc64_sysv_abi_return_value): Likewise.
269 2015-06-12 Antoine Tremblay <antoine.tremblay@ericsson.com>
272 * breakpoint.c (create_breakpoint): Save extra_string for
275 2015-06-10 Walfred Tedeschi <walfred.tedeschi@intel.com>
277 * i386-tdep.c (i386_mpx_get_bt_entry): Add a cast for mpx_bd_mask
278 and bt_mask to CORE_ADDR.
280 2015-06-11 Gary Benson <gbenson@redhat.com>
282 * nat/linux-namespaces.c (mnsh_send_message): Use pulongest.
283 (mnsh_recv_message): Likewise.
285 2015-06-11 Walfred Tedeschi <walfred.tedeschi@intel.com>
287 * i386-tdep.c (i386_mpx_print_bounds): use of LONGEST instead of
288 long long int and plongest instead of %ll.
290 2015-06-11 Gary Benson <gbenson@redhat.com>
292 * nat/linux-namespaces.c (gdb_wait.h): New include.
293 (sys/wait.h): Do not include.
295 2015-06-10 Simon Marchi <simon.marchi@ericsson.com>
297 * dwarf2read.c (dwarf_record_line): Call dwarf_record_line if
298 end_sequence is true.
300 2015-06-10 Jan Kratochvil <jan.kratochvil@redhat.com>
303 * solib-target.c (library_list_start_list): Use explicit NULL
306 2015-06-10 Jan Kratochvil <jan.kratochvil@redhat.com>
308 * solib-target.c (library_list_start_list): Do not dereference
309 variable version in its initialization. Make the VERSION check handle
311 (library_list_attributes): Make "version" GDB_XML_AF_OPTIONAL.
313 2015-06-10 Gary Benson <gbenson@redhat.com>
315 * NEWS: Announce support for direct access of executable and
316 shared library files when attaching to inferiors in containers
317 on GNU/Linux systems.
319 2015-06-10 Gary Benson <gbenson@redhat.com>
321 * remote.c (struct remote_state) <fs_pid>: New field.
322 (new_remote_state): Initialize the above.
323 (PACKET_vFile_setfs): New enum value.
324 (remote_hostio_set_filesystem): New function.
325 (remote_hostio_open): Call the above.
326 (remote_hostio_unlink): Likewise.
327 (remote_hostio_readlink): Likewise.
328 (_initialize_remote): Register new "set/show remote
329 hostio-setfs-packet" command.
330 * NEWS: Announce new vFile:setfs packet.
332 2015-06-10 Gary Benson <gbenson@redhat.com>
334 * linux-nat.c (nat/linux-namespaces.h): New include.
335 (fileio.h): Likewise.
336 (linux_nat_filesystem_is_local): New function.
337 (linux_nat_fileio_pid_of): Likewise.
338 (linux_nat_fileio_open): Likewise.
339 (linux_nat_fileio_readlink): Likewise.
340 (linux_nat_fileio_unlink): Likewise.
341 (linux_nat_add_target): Initialize to_filesystem_is_local,
342 to_fileio_open, to_fileio_readlink and to_fileio_unlink.
343 (_initialize_linux_nat): New "set/show debug linux-namespaces"
345 * NEWS: Mention new "set/show debug linux-namespaces" commands.
347 2015-06-10 Gary Benson <gbenson@redhat.com>
349 * target.h (struct inferior): New forward declaration.
350 (struct target_ops) <to_filesystem_is_local>: Update comment.
351 (struct target_ops) <to_fileio_open>: New argument inf.
352 Update comment. All implementations updated.
353 (struct target_ops) <to_fileio_unlink>: Likewise.
354 (struct target_ops) <to_fileio_readlink>: Likewise.
355 (target_filesystem_is_local): Update comment.
356 (target_fileio_open): New argument inf. Update comment.
357 (target_fileio_unlink): Likewise.
358 (target_fileio_readlink): Likewise.
359 (target_fileio_read_alloc): Likewise.
360 (target_fileio_read_stralloc): Likewise.
361 * target.c (target_fileio_open): New argument inf.
362 Pass inf to implementation. Update debug printing.
363 (target_fileio_unlink): Likewise.
364 (target_fileio_readlink): Likewise.
365 (target_fileio_read_alloc_1): New argument inf. Pass inf
366 to target_fileio_open.
367 (target_fileio_read_alloc): New argument inf. Pass inf to
368 target_fileio_read_alloc_1.
369 (target_fileio_read_stralloc): Likewise.
370 * gdb_bfd.c (inferior.h): New include.
371 (gdb_bfd_iovec_fileio_open): Replace unused "open_closure"
372 argument with new argument "inferior". Pass inferior to
374 (gdb_bfd_open): Supply inferior argument to
375 gdb_bfd_iovec_fileio_open.
376 * linux-tdep.c (linux_info_proc): Supply inf argument to
377 relevant target_fileio calls.
378 (linux_find_memory_regions_full): Likewise.
379 (linux_fill_prpsinfo): Likewise.
380 * remote.c (remote_filesystem_is_local): Supply inf
381 argument to remote_hostio_open.
382 (remote_file_put): Likewise.
383 (remote_file_get): Likewise.
384 (remote_file_delete): Supply inf argument to
385 remote_hostio_unlink.
387 2015-06-10 Gary Benson <gbenson@redhat.com>
389 * inf-child.c (inf_child_fileio_open): Replace comment.
390 (inf_child_fileio_pwrite): Likewise.
391 (inf_child_fileio_pread): Likewise.
392 (inf_child_fileio_fstat): Insert blank line before comment.
393 (inf_child_fileio_close): Replace comment.
394 (inf_child_fileio_unlink): Likewise.
395 (inf_child_fileio_readlink): Likewise.
396 * remote.c (remote_hostio_open): Likewise.
397 (remote_hostio_pread): Likewise.
398 (remote_hostio_pwrite): Likewise.
399 (remote_hostio_close): Likewise.
400 (remote_hostio_unlink): Likewise.
401 (remote_hostio_readlink): Likewise.
402 (remote_hostio_fstat): Likewise.
403 (remote_filesystem_is_local): Likewise.
404 * target.c (target_fileio_open): Likewise.
405 (target_fileio_pwrite): Likewise.
406 (target_fileio_pread): Likewise.
407 (target_fileio_fstat): Insert blank line before comment.
408 (target_fileio_close): Replace comment.
409 (target_fileio_unlink): Likewise.
410 (target_fileio_readlink): Likewise.
411 (target_fileio_read_alloc): Likewise.
412 (target_fileio_read_stralloc): Likewise.
414 2015-06-10 Gary Benson <gbenson@redhat.com>
416 * linux-thread-db.c (nat/linux-namespaces.h): New include.
417 (check_pid_namespace_match): Use linux_ns_same rather than
418 linux_proc_pid_get_ns to spot PID namespace mismatches.
419 * nat/linux-procfs.h (linux_proc_pid_get_ns): Remove.
420 * nat/linux-procfs.c (linux_proc_pid_get_ns): Likewise.
422 2015-06-10 Gary Benson <gbenson@redhat.com>
424 * configure.ac (AC_CHECK_FUNCS): Add setns.
425 * config.in: Regenerate.
426 * configure: Likewise.
427 * nat/linux-namespaces.h: New file.
428 * nat/linux-namespaces.c: Likewise.
429 * Makefile.in (HFILES_NO_SRCDIR): Add nat/linux-namespaces.h.
430 (linux-namespaces.o): New rule.
431 * config/aarch64/linux.mh (NATDEPFILES): Add linux-namespaces.o.
432 * config/alpha/alpha-linux.mh (NATDEPFILES): Likewise.
433 * config/arm/linux.mh (NATDEPFILES): Likewise.
434 * config/i386/linux.mh (NATDEPFILES): Likewise.
435 * config/i386/linux64.mh (NATDEPFILES): Likewise.
436 * config/ia64/linux.mh (NATDEPFILES): Likewise.
437 * config/m32r/linux.mh (NATDEPFILES): Likewise.
438 * config/m68k/linux.mh (NATDEPFILES): Likewise.
439 * config/mips/linux.mh (NATDEPFILES): Likewise.
440 * config/pa/linux.mh (NATDEPFILES): Likewise.
441 * config/powerpc/linux.mh (NATDEPFILES): Likewise.
442 * config/powerpc/ppc64-linux.mh (NATDEPFILES): Likewise.
443 * config/powerpc/spu-linux.mh (NATDEPFILES): Likewise.
444 * config/s390/linux.mh (NATDEPFILES): Likewise.
445 * config/sparc/linux.mh (NATDEPFILES): Likewise.
446 * config/sparc/linux64.mh (NATDEPFILES): Likewise.
447 * config/tilegx/linux.mh (NATDEPFILES): Likewise.
448 * config/xtensa/linux.mh (NATDEPFILES): Likewise.
450 2015-06-10 Gary Benson <gbenson@redhat.com>
452 * utils.h (make_cleanup_close): Moved to common/filestuff.h.
453 * utils.c (do_close_cleanup): Moved to common/filestuff.c.
454 (make_cleanup_close): Likewise.
455 * common/filestuff.h (make_cleanup_close): Moved from utils.h.
456 * common/filestuff.c (do_close_cleanup): Moved from utils.c.
457 (make_cleanup_close): Likewise.
459 2015-06-03 Jon Turney <jon.turney@dronecode.org.uk>
461 * windows-nat.c (thread_rec): Also ignore ERROR_INVALID_HANDLE
462 from SuspendThread().
464 2015-06-03 Jon Turney <jon.turney@dronecode.org.uk>
466 * windows-nat.c (handle_output_debug_string): Trim trailing '\n'
467 from OutputDebugString.
469 2015-06-10 Walfred Tedeschi <walfred.tedeschi@intel.com>
470 Mircea Gherzan <mircea.gherzan@intel.com>
472 * i386-tdep.c (MPX_BASE_MASK, MPX_BD_MASK, MPX_BT_MASK, MPX_BD_MASK_32,
473 MPX_BT_MASK_32): New macros.
474 (i386_mpx_set_bounds): New function that implements
475 the command "set-mpx-bound".
476 (i386_mpx_enabled): Helper function to test MPX availability.
477 (i386_mpx_bd_base): Helper function to calculate the base directory
479 (i386_mpx_get_bt_entry): Helper function to access a bound
481 (i386_mpx_print_bounds): Effectively display bound information.
482 (_initialize_i386_tdep): Add new commands to commands "set mpx" and
484 (_initialize_i386_tdep):
485 Add "bound" to the commands "show mpx" and "set mpx" commands.
486 (mpx_set_cmdlist and mpx_show_cmdlist): List for the new prefixed "set mpx"
487 and "show mpx" commands.
488 * NEWS: List new commands for MPX support.
490 2015-06-09 Gary Benson <gbenson@redhat.com>
492 * common/fileio.h (fileio_to_host_mode): New declaration.
493 * common/fileio.c (fileio_to_host_mode): New Function.
494 * inf-child.c (inf_child_fileio_open): Process mode argument
495 with fileio_to_host_mode.
497 2015-06-09 Gary Benson <gbenson@redhat.com>
499 * common/fileio.c (fileio_mode_pack): Fix preprocessor
502 2015-06-05 Gary Benson <gbenson@redhat.com>
504 * gdb_bfd.c (gdb_bfd_open): Move vgdb special case to...
505 * remote.c (remote_filesystem_is_local): ...here.
507 2015-06-04 Yao Qi <yao.qi@linaro.org>
509 * gdbarch.c: Regenerate it.
511 2015-06-03 Jan Kratochvil <jan.kratochvil@redhat.com>
513 * arch-utils.c (default_infcall_munmap): New.
514 * arch-utils.h (default_infcall_munmap): New declaration.
515 * compile/compile-object-load.c (struct munmap_list, munmap_list_add)
516 (munmap_list_free, munmap_listp_free_cleanup): New.
517 (struct setup_sections_data): Add field munmap_list_headp.
518 (setup_sections): Call munmap_list_add.
519 (compile_object_load): New variable munmap_list_head, initialize
520 setup_sections_data.munmap_list_headp, return munmap_list_head.
521 * compile/compile-object-load.h (struct munmap_list): New declaration.
522 (struct compile_module): Add field munmap_list_head.
523 (munmap_list_free): New declaration.
524 * compile/compile-object-run.c (struct do_module_cleanup): Add field
526 (do_module_cleanup): Call munmap_list_free.
527 (compile_object_run): Pass munmap_list_head to do_module_cleanup.
528 * gdbarch.c: Regenerate.
529 * gdbarch.h: Regenerate.
530 * gdbarch.sh (infcall_munmap): New.
531 * linux-tdep.c (linux_infcall_munmap): New.
532 (linux_init_abi): Install it.
534 2015-06-02 Simon Marchi <simon.marchi@ericsson.com>
537 * inferior.c (detach_inferior): Call exit_inferior_1 with silent = 0.
539 2015-06-02 Yao Qi <yao.qi@linaro.org>
541 * i386-linux-nat.c: Include linux-nat.h.
543 2015-06-01 Andreas Schwab <schwab@linux-m68k.org>
544 Jan Kratochvil <jan.kratochvil@redhat.com>
547 * dwarf2-frame-tailcall.c (pretended_chain_levels): Correct
549 * dwarf2loc.c (chain_candidate): Likewise.
551 2015-06-01 Yao Qi <yao.qi@linaro.org>
553 * arm-linux-nat.c (fetch_vfp_regs): Use PTRACE_GETREGSET.
554 (store_vfp_regs): Use PTRACE_SETREGSET.
556 2015-06-01 Yao Qi <yao.qi@linaro.org>
558 * arm-linux-nat.c (fetch_fpregister): Use PTRACE_GETREGSET.
559 (fetch_fpregs): Likewise.
560 * arm-linux-nat.c (store_fpregister): Use PTRACE_SETREGSET.
561 (store_fpregs): Likewise.
563 2015-06-01 Yao Qi <yao.qi@linaro.org>
565 * arm-linux-nat.c (fetch_register): Use PTRACE_GETREGSET.
566 (fetch_regs): Likewise.
567 (store_regs): Use PTRACE_SETREGSET.
568 (store_register): Likewise.
570 2015-06-01 Yao Qi <yao.qi@linaro.org>
572 * arm-linux-nat.c (arm_linux_read_description): Check whether
573 kernel supports PTRACE_GETREGSET.
575 2015-06-01 Yao Qi <yao.qi@linaro.org>
577 * x86-linux-nat.c (have_ptrace_getregset): Move it to ...
578 * linux-nat.c: ... here.
579 * x86-linux-nat.h (have_ptrace_getregset): Move the declaration
581 * linux-nat.h: ... here.
583 2015-06-01 Yao Qi <yao.qi@linaro.org>
585 * amd64-linux-nat.c: Include "nat/linux-ptrace.h".
586 * i386-linux-nat.c: Likewise.
587 * nat/linux-ptrace.h (PTRACE_GETREGSET, PTRACE_SETREGSET): Define.
588 * s390-linux-nat.c: Include "nat/linux-ptrace.h".
589 (PTRACE_GETREGSET, PTRACE_SETREGSET): Remove.
590 * x86-linux-nat.c: Include "nat/linux-ptrace.h".
591 * x86-linux-nat.h (PTRACE_GETREGSET, PTRACE_SETREGSET): Remove.
593 2015-05-30 Eli Zaretskii <eliz@gnu.org>
595 * go32-nat.c (go32_xfer_memory): Fix the return value to be
596 compatible to what read_child and write_child return. This
597 unbreaks that DJGPP build of GDB which was broken since v7.7.
599 2015-05-29 Martin Galvan <martin.galvan@tallertechnologies.com>
601 * MAINTAINERS (Write After Approval): Add Martin Galvan.
603 2015-05-29 Roland McGrath <mcgrathr@google.com>
606 * osabi.c (generic_elf_osabi_sniff_abi_tag_sections): Use warning
607 rather than internal_error for an unrecognized value.
609 2015-05-29 Max Filippov <jcmvbkbc@gmail.com>
611 * xtensa-tdep.c (xtensa_pseudo_register_read)
612 (xtensa_pseudo_register_write): Don't alias last pseudo register
615 2015-05-28 Don Breazeal <donb@codesourcery.com>
617 * infrun.c (follow_fork_inferior): Ensure the use of
618 process-style ptids (pid,0,0) in verbose/debug "Detaching"
621 2015-05-28 Doug Evans <dje@google.com>
623 * dwarf2read.c (record_line_ftype): Remove, duplicate.
625 2015-05-28 Yao Qi <yao.qi@linaro.org>
627 * arm-linux-nat.c (arm_linux_has_wmmx_registers): Remove.
628 (arm_linux_fetch_inferior_registers): Use
629 tdep->have_wmmx_registers instead of arm_linux_has_wmmx_registers.
630 (arm_linux_store_inferior_registers): Likewise.
631 (arm_linux_read_description): Don't set
632 arm_linux_has_wmmx_registers.
633 * arm-tdep.c (arm_gdbarch_init): Set
634 tdep->have_wmmx_registers according target descriptions.
635 * arm-tdep.h (struct gdbarch_tdep) <have_wmmx_registers>: New
638 2015-05-28 Yao Qi <yao.qi@linaro.org>
640 * arm-linux-nat.c (arm_linux_vfp_register_count): Remove.
641 (fetch_vfp_regs): Use vfp_register_count from gdbarch_tdep
642 instead of arm_linux_vfp_register_count.
643 (store_vfp_regs): Likewise.
644 (arm_linux_fetch_inferior_registers): Likewise.
645 (arm_linux_store_inferior_registers): Likewise.
646 (arm_linux_read_description): Don't set
647 arm_linux_vfp_register_count.
648 * arm-linux-tdep.c (arm_linux_iterate_over_regset_sections):
650 * arm-tdep.c (arm_gdbarch_init): Add assert on
652 * arm-tdep.h (struct gdbarch_tdep) <have_vfp_registers>: Rename
653 field to vfp_register_count. All users updated.
655 2015-05-28 Kyle Huey <me@kylehuey.com> (tiny patch)
657 * gdb/arm-tdep.c (arm_gdbarch_init): Perform arm_abi detection on
658 ELFOSABI_GNU binaries.
660 2015-05-27 Doug Evans <dje@google.com>
662 * dwarf2read.c (lnp_state_machine): New typedef.
663 (lnp_reader_state): New typedef.
664 (dwarf_record_line_1): Renamed from dwarf_record_line.
666 (dwarf_record_line): New function.
667 (init_lnp_state_machine): New function.
668 (check_line_address): Replace p_record_line parameter with state.
670 (dwarf_decode_lines_1): Call dwarf_record_line, init_lnp_state_machine.
671 Update to record state in lnp_state_machine.
673 2015-05-27 Doug Evans <dje@google.com>
675 * dwarf2read.c (record_line_ftype): New typedef.
676 (check_line_address): New function.
677 (dwarf_decode_lines_1): Call it.
679 2015-05-27 Doug Evans <dje@google.com>
681 * NEWS: Mention "set debug dwarf-line".
682 * dwarf2read.c (dwarf_line_debug): New static global.
683 (add_include_dir): Add debug dwarf-line support.
684 (add_file_name, dwarf_record_line, dwarf_finish_line): Ditto.
685 (_initialize_dwarf2_read): New parameter "debug dwarf-line".
687 2015-05-27 Doug Evans <dje@google.com>
689 * cp-namespace.c (cp_lookup_nested_symbol): New arg "domain".
691 (cp_lookup_nested_symbol_1, find_symbol_in_baseclass): Ditto.
692 * cp-support.h (cp_lookup_nested_symbol): Update.
694 2015-05-27 Doug Evans <dje@google.com>
697 * block.c (block_find_symbol): New function.
698 (block_find_non_opaque_type): Ditto.
699 (block_find_non_opaque_type_preferred): Ditto.
700 * block.h (block_symbol_matcher_ftype): New typedef.
701 (block_find_symbol): Declare.
702 (block_find_non_opaque_type): Ditto.
703 (block_find_non_opaque_type_preferred): Ditto.
704 * dwarf2read.c (dw2_lookup_symbol): Call block_find_symbol.
705 * psymtab.c (psym_lookup_symbol): Ditto.
706 * symtab.c (basic_lookup_transparent_type_1): New function.
707 (basic_lookup_transparent_type): Call it.
709 2015-05-27 Yao Qi <yao.qi@linaro.org>
711 * aarch64-tdep.c (aarch64_record_data_proc_simd_fp): Return
712 AARCH64_RECORD_UNKNOWN for unknown instruction encoding.
714 2015-05-27 Yao Qi <yao.qi@linaro.org>
716 * aarch64-tdep.c (aarch64_record_branch_except_sys): Split lines
718 (aarch64_record_load_store): Likewise.
720 2015-05-26 Doug Evans <dje@google.com>
722 PR c++/18141, c++/18417.
723 * cp-support.c (cp_lookup_rtti_type): Handle the case of NAME being
726 2015-05-26 Doug Evans <dje@google.com>
728 * NEWS: Add entries for command renamings.
729 * dwarf2read.c (dwarf_read_debug): Renamed from dwarf2_read_debug.
731 (dwarf_die_debug): Renamed from dwarf2_die_debug. All uses updated.
732 (dwarf_max_cache_age): Renamed from dwarf2_max_cache_age.
734 (show_dwarf_max_cache_age): Renamed from show_dwarf2_max_cache_age.
735 All callers updated. Fix spelling of DWARF in help text.
736 (set_dwarf_cmdlist): Renamed from set_dwarf2_cmdlist.
738 (show_dwarf_cmdlist): Renamed from show_dwarf2_cmdlist.
740 (set_dwarf_cmd): Renamed from set_dwarf2_cmd. All callers updated.
741 (show_dwarf_cmd): Renamed from show_dwarf2_cmd. All callers updated.
742 (dwarf_always_disassemble): Renamed from dwarf_always_disassemble.
744 (show_dwarf_always_disassemble): Renamed from
745 show_dwarf2_always_disassemble. All callers updated.
746 (_initialize_dwarf2_read): Rename "set/show dwarf2" prefix to
747 "set/show dwarf". Rename "set/show dwarf2 max-cache-age" to
748 "set/show dwarf max-cache-age". Rename
749 "set/show dwarf2 always-disassemble" to
750 "set/show dwarf always-disassemble". Rename
751 "set/show debug dwarf2-read" to "set/show debug dwarf-read". Rename
752 "set/show debug dwarf2-die" to "set/show debug dwarf-die".
754 2015-05-26 Doug Evans <dje@google.com>
757 * python/py-lazy-string.c (stpy_convert_to_value): Use
758 gdbpy_gdb_memory_error not PyExc_MemoryError.
759 (gdbpy_create_lazy_string_object): Ditto.
761 2015-05-26 Andrew Burgess <andrew.burgess@embecosm.com>
763 * tui/tui-regs.c (tui_reg_next_command): Compare against NULL.
765 2015-05-26 Andrew Burgess <andrew.burgess@embecosm.com>
767 * tui/tui-regs.c (tui_reg_prev_command): New function.
768 (_initialize_tui_regs): Add 'prev' command for 'tui reg'.
769 * reggroups.c (reggroup_prev): New function.
770 * reggroups.h (reggroup_prev): Add declaration. Update comment.
772 2015-05-26 Omair Javaid <omair.javaid@linaro.org>
773 Yao Qi <yao.qi@linaro.org>
775 * aarch64-linux-tdep.c: Include linux-record.h and
777 (struct linux_record_tdep aarch64_linux_record_tdep): Declare.
778 (aarch64_syscall): New enum.
779 (aarch64_canonicalize_syscall): New function.
780 (aarch64_all_but_pc_registers_record): New function.
781 (aarch64_linux_syscall_record): New function.
782 (aarch64_linux_init_abi): Install AArch64 process record
783 handler. Update to handle syscall recording.
784 * aarch64-tdep.c: Include record.h and record-full.h.
785 (submask, bit, bits, REG_ALLOC, MEM_ALLOC): New macros.
786 (struct aarch64_mem_r): Define.
787 (aarch64_record_result): New enum.
788 (struct insn_decode_record): Define.
789 (insn_decode_record): New typedef.
790 (aarch64_record_data_proc_reg): New function.
791 (aarch64_record_data_proc_imm): New function.
792 (aarch64_record_branch_except_sys): New function.
793 (aarch64_record_load_store): New function.
794 (aarch64_record_data_proc_simd_fp): New function.
795 (aarch64_record_asimd_load_store): New function.
796 (aarch64_record_decode_insn_handler): New function.
797 (deallocate_reg_mem): New function.
798 (aarch64_process_record): New function.
799 * aarch64-tdep.h (struct gdbarch_tdep) <aarch64_syscall_record>:
801 (aarch64_process_record): New extern declaration.
802 * configure.tgt: Add linux-record.o to gdb_target_obs.
803 * linux-record.h (struct linux_record_tdep) <arg7>: New field.
805 2015-05-26 Omair Javaid <omair.javaid@linaro.org>
807 * NEWS: Add a note on process record-replay support on aarch64*-linux*
810 2015-05-26 Martin Galvan <martin.galvan@tallertechnologies.com>
812 * amd64-tdep.c: Replace in_function_epilogue_p with
813 stack_frame_destroyed_p throughout.
814 * arch-utils.c: Ditto.
815 * arch-utils.h: Ditto.
817 * breakpoint.c: Ditto.
819 * hppa-tdep.c: Ditto.
820 * i386-tdep.c: Ditto.
821 * mips-tdep.c: Ditto.
822 * nios2-tdep.c: Ditto.
823 * rs6000-tdep.c: Ditto.
824 * s390-linux-tdep.c: Ditto.
825 * score-tdep.c: Ditto.
827 * sparc-tdep.c: Ditto.
828 * sparc-tdep.h: Ditto.
829 * sparc64-tdep.c: Ditto.
831 * tic6x-tdep.c: Ditto.
832 * tilegx-tdep.c: Ditto.
833 * xstormy16-tdep.c: Ditto.
834 * gdbarch.c, gdbarch.h: Re-generated.
836 2015-05-22 Andrew Burgess <andrew.burgess@embecosm.com>
838 * NEWS: Mention 'tui enable' and 'tui disable'.
839 * tui/tui.c (tui_enable_command): New function.
840 (tui_disable_command): New function.
841 (_initialize_tui): New function.
843 2015-05-21 Andrew Burgess <andrew.burgess@embecosm.com>
845 * tui/tui-regs.c (tui_reg_next_command): Use NULL not 0.
847 2015-05-21 Andrew Burgess <andrew.burgess@embecosm.com>
849 * tui/tui-layout.c (tui_set_layout_for_display_command): Ensure
852 2015-05-21 Andrew Burgess <andrew.burgess@embecosm.com>
854 * tui/tui-layout.c (tui_layout_command): Move call to tui_enable
856 (tui_set_layout_for_display_command): ...here, before calling
857 tui_set_layout. Only set the layout if gdb has not already
858 entered the TUI_FAILURE state.
860 2015-05-21 Andrew Burgess <andrew.burgess@embecosm.com>
862 * tui/tui-layout.c (layout_completer): New function.
863 (_initialize_tui_layout): Set completer on layout command.
865 2015-05-21 Andrew Burgess <andrew.burgess@embecosm.com>
867 * tui/tui-layout.c (tui_set_layout): Remove
868 tui_register_display_type parameter. Remove all checking of this
869 parameter, and reindent function. Update header comment.
870 (tui_set_layout_for_display_command): Rename to...
871 (tui_set_layout_by_name): ...this, and don't check for different
872 register class types, don't pass a tui_register_display_type to
873 tui_set_layout. Update header comment.
874 (layout_names): Remove register set specific names.
875 * tui/tui-layout.h (tui_set_layout): Remove
876 tui_register_display_type parameter.
877 * tui/tui.c (tui_rl_change_windows): Don't pass a
878 tui_register_display_type to tui_set_layout.
879 (tui_rl_delete_other_windows): Likewise.
880 (tui_enable): Likewise.
881 * tui/tui-data.h (TUI_FLOAT_REGS_NAME): Remove.
882 (TUI_FLOAT_REGS_NAME_LOWER): Remove.
883 (TUI_GENERAL_REGS_NAME): Remove.
884 (TUI_GENERAL_REGS_NAME_LOWER): Remove.
885 (TUI_SPECIAL_REGS_NAME): Remove.
886 (TUI_SPECIAL_REGS_NAME_LOWER): Remove.
887 (TUI_GENERAL_SPECIAL_REGS_NAME): Remove.
888 (TUI_GENERAL_SPECIAL_REGS_NAME_LOWER): Remove.
889 (enum tui_register_display_type): Remove.
890 (struct tui_layout_def): Remove regs_display_type and
891 float_regs_display_type fields.
892 (struct tui_data_info): Remove regs_display_type field.
893 (tui_layout_command): Use new name for
894 tui_set_layout_for_display_command.
895 * tui/tui-data.c (layout_def): Don't initialise removed fields.
896 (tui_clear_win_detail): Don't initialise removed fields of
898 * tui/tui-regs.c (tui_show_registers): Use new name for
899 tui_set_layout_for_display_command.
900 * tui/tui.h (tui_set_layout_for_display_command): Rename
902 (tui_set_layout_by_name): ...this.
903 * printcmd.c (display_command): Remove tui related layout call,
906 2015-05-20 Joel Brobecker <brobecker@adacore.com>
908 * infrun.c (handle_inferior_event_1): Renames handle_inferior_event.
909 (handle_inferior_event): New function.
911 2015-05-20 Joel Brobecker <brobecker@adacore.com>
913 * ada-lang.c (to_fixed_array_type): Rename local variable
914 typename into type_name.
916 2015-05-19 Jan Kratochvil <jan.kratochvil@redhat.com>
918 Fix ASAN crash for gdb.compile/compile.exp.
919 * infcall.c (call_function_by_hand_dummy): Use xstrdup for NAME.
921 2015-05-19 Jan Kratochvil <jan.kratochvil@redhat.com>
923 * compile/compile-c-symbols.c (convert_symbol_sym, gcc_convert_symbol)
924 (gcc_symbol_address): Change gdb_stdout to gdb_stdlog.
925 * compile/compile-object-load.c (setup_sections, compile_object_load):
927 * compile/compile.c (compile_to_object): Likewise.
929 2015-05-16 Doug Evans <xdje42@gmail.com>
931 * NEWS: Mention support for unbuffered Guile memory ports.
932 * scm-ports.c (ioscm_memory_port): Update comments on end, size.
933 (ioscm_lseek_address): Improve overflow calculation.
934 (gdbscm_memory_port_fill_input): Add assert.
935 (gdbscm_memory_port_write): Handle unbuffered ports.
936 Handle large writes identical to Guile's fport_write.
937 (gdbscm_memory_port_seek): Fix seeking past end check.
938 (gdbscm_memory_port_close): Handle closing unbuffered port.
939 (ioscm_parse_mode_bits): Recognize "0" for unbuffered ports.
940 (ioscm_init_memory_port): Handle unbuffered ports.
941 (ioscm_reinit_memory_port): Ditto.
942 (ioscm_init_memory_port): Update size calculation.
943 (gdbscm_open_memory): Support zero sized ports.
945 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
947 * compile/compile-object-load.c (get_out_value_type): Fix uninitialized
948 variable compiler warnings.
950 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
952 * compile/compile-object-load.c (get_out_value_type): Fix returned type.
954 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
955 Phil Muldoon <pmuldoon@redhat.com>
957 * NEWS (Changes since GDB 7.9): Add compile print.
958 * compile/compile-c-support.c (add_code_header, add_code_footer)
959 (c_compute_program): Add COMPILE_I_PRINT_ADDRESS_SCOPE and
960 COMPILE_I_PRINT_VALUE_SCOPE.
961 * compile/compile-internal.h (COMPILE_I_PRINT_OUT_ARG_TYPE)
962 (COMPILE_I_PRINT_OUT_ARG, COMPILE_I_EXPR_VAL, COMPILE_I_EXPR_PTR_TYPE):
964 * compile/compile-object-load.c: Include block.h.
965 (get_out_value_type): New function.
966 (compile_object_load): Handle COMPILE_I_PRINT_ADDRESS_SCOPE and
967 COMPILE_I_PRINT_VALUE_SCOPE. Set compile_module's OUT_VALUE_ADDR and
969 * compile/compile-object-load.h (struct compile_module): Add fields
970 out_value_addr and out_value_type.
971 * compile/compile-object-run.c: Include valprint.h and compile.h.
972 (struct do_module_cleanup): Add fields out_value_addr and
974 (do_module_cleanup): Handle COMPILE_I_PRINT_ADDRESS_SCOPE and
975 COMPILE_I_PRINT_VALUE_SCOPE.
976 (compile_object_run): Propagate out_value_addr and out_value_type.
978 * compile/compile.c: Include valprint.h.
979 (compile_print_value, compile_print_command): New functions.
980 (eval_compile_command): Handle failed COMPILE_I_PRINT_ADDRESS_SCOPE.
981 (_initialize_compile): Update compile code help text. Install
982 compile_print_command.
983 * compile/compile.h (compile_print_value): New prototype.
984 * defs.h (enum compile_i_scope_types): Add
985 COMPILE_I_PRINT_ADDRESS_SCOPE and COMPILE_I_PRINT_VALUE_SCOPE.
987 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
989 * compile/compile-object-load.c (get_regs_type): Add parameter func_sym.
990 Rely on its parameter count.
991 (compile_object_load): Replace lookup_minimal_symbol_text by
992 lookup_global_symbol_from_objfile. Verify FUNC_SYM. Set it in the
994 * compile/compile-object-load.h (struct compile_module): Replace
995 func_addr by func_sym.
996 * compile/compile-object-run.c: Include block.h.
997 (compile_object_run): Reset module variable after it is freed. Use
998 FUNC_SYM instead of FUNC_ADDR. Rely on it.
1000 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
1002 * compile/compile-c-support.c (print_one_macro): Use #ifndef.
1003 (generate_register_struct): Use __gdb_uintptr for TYPE_CODE_PTR.
1004 (c_compute_program): Call generate_register_struct after typedefs.
1005 * compile/compile-loc2c.c (push, pushf_register_address)
1006 (pushf_register): Cast to GCC_UINTPTR.
1007 (do_compile_dwarf_expr_to_c): Use unused attribute. Add space after
1008 type. Use GCC_UINTPTR instead of void *. Remove excessive cast.
1009 (compile_dwarf_expr_to_c): Use GCC_UINTPTR instead of void *.
1010 * compile/compile.c (_initialize_compile): Enable warnings for
1013 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
1015 * cli/cli-script.c (execute_control_command): Update
1016 eval_compile_command caller.
1017 * compile/compile-object-load.c (compile_object_load): Add parameters
1018 scope and scope_data. Set them.
1019 * compile/compile-object-load.h (struct compile_module): Add fields
1020 scope and scope_data.
1021 (compile_object_load): Add parameters scope and scope_data.
1022 * compile/compile-object-run.c (struct do_module_cleanup): Add fields
1023 scope and scope_data.
1024 (compile_object_run): Propagate the fields scope and scope_data.
1025 * compile/compile.c (compile_file_command, compile_code_command):
1026 Update eval_compile_command callers.
1027 (eval_compile_command): Add parameter scope_data. Pass it plus scope.
1028 * compile/compile.h (eval_compile_command): Add parameter scope_data.
1029 * defs.h (struct command_line): Add field scope_data.
1031 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
1033 * printcmd.c (struct format_data): Move it to valprint.h.
1034 (print_command_parse_format, print_value): New functions from ...
1035 (print_command_1): ... here. Call them.
1036 * valprint.h (struct format_data): Move it here from printcmd.c.
1037 (print_command_parse_format, print_value): New declarations.
1039 2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
1041 * compile/compile-object-load.c (compile_object_load): Add
1042 COMPILE_DEBUG message.
1044 2015-05-15 Jerome Guitton <guitton@adacore.com>
1046 * ada-lang.c (ada_value_ptr_subscript): Use enum position of
1047 index to get element instead of enum value.
1048 (ada_value_slice_from_ptr, ada_value_slice): Use enum position
1049 of index to compute length, but enum values to compute bounds.
1050 (ada_array_length): Use enum position of index instead of enum value.
1051 (pos_atr): Move position computation to...
1052 (ada_evaluate_subexp): Use enum values to compute bounds.
1053 * gdbtypes.c (discrete_position): ...this new function.
1054 * gdbtypes.h (discrete_position): New function declaration.
1055 * valprint.c (val_print_array_elements): Call discrete_position
1056 to handle array indexed by non-contiguous enumeration types.
1058 2015-05-15 Jerome Guitton <guitton@adacore.com>
1060 * ada-lang.c (find_parallel_type_by_descriptive_type):
1061 Go through typedefs during lookup.
1062 (to_fixed_array_type): Add support for non-bit packed arrays
1063 as variable-length fields.
1065 2015-05-15 Pedro Alves <palves@redhat.com>
1066 Simon Marchi <simon.marchi@ericsson.com>
1068 * event-loop.c (gdb_notifier) <next_file_handler,
1069 next_poll_fds_index>: New fields.
1070 (get_next_file_handler_to_handle_and_advance): New function.
1071 (delete_file_handler): If deleting the next file handler to
1072 handle, advance to the next file handler.
1073 (gdb_wait_for_event): Bail early if no event fired. Poll file
1074 handlers in round-robin fashion.
1076 2015-05-15 Pedro Alves <palves@redhat.com>
1078 * linux-tdep.c (linux_find_memory_regions_full): Rename local
1079 'private' to 'priv'.
1081 2015-05-15 Pedro Alves <palves@redhat.com>
1083 * nat/linux-nat.h: Include "target/waitstatus.h".
1085 2015-05-15 Yuanhui Zhang <asmwarrior@gmail.com>
1087 * python/py-unwind.c (struct reg_info): Move out of ...
1088 (struct cached_frame_info): ... this scope.
1089 (pending_frame_object_type, unwind_info_object_type): Make extern.
1091 2015-05-15 Joel Brobecker <brobecker@adacore.com>
1093 * ada-lang.c (ada_value_primitive_packed_val): Make sure
1094 accumSize is never negative.
1096 2015-05-14 Patrick Palka <patrick@parcs.ath.cx>
1098 * tui/tui-command.c: Remove include of <ctype.h>.
1099 (tui_dispatch_ctrl_char): Remove workaround for xterm terminals.
1101 2015-05-13 Martin Galvan <martin.galvan@tallertechnologies.com>
1103 * dwarf2read.c (die_needs_namespace): Return 1 for
1104 DW_TAG_inlined_subroutine.
1106 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
1108 * regcache.c (regcache_cpy_no_passthrough): New declaration.
1109 (regcache_cpy_no_passthrough): Make it static, add function comment.
1110 * regcache.h (regcache_dup, regcache_cpy): Reduce/update their comment.
1111 (regcache_cpy_no_passthrough): Remove declaration.
1113 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
1115 * gdbthread.h (struct thread_control_state): Update comment for
1117 * infcall.c (run_inferior_call): Update comment about
1119 * infcmd.c (get_return_value): Update comment about stop_registers.
1120 (finish_forward): Update comment about proceed_to_finish.
1121 * infrun.c (stop_registers): Remove.
1122 (clear_proceed_status, normal_stop): Remove stop_registers handling.
1123 * infrun.h (stop_registers): Remove.
1125 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
1127 * infcall.c (struct dummy_frame_context_saver)
1128 (dummy_frame_context_saver_data_free, dummy_frame_context_saver_dtor)
1129 (dummy_frame_context_saver_drop, dummy_frame_context_saver_cleanup)
1130 (dummy_frame_context_saver_get_regs, dummy_frame_context_saver_setup):
1132 (call_function_by_hand_dummy): Move discard_cleanups of
1133 inf_status_cleanup before dummy_frame_push. Call
1134 dummy_frame_context_saver_setup and prepare context_saver_cleanup.
1135 Use dummy_frame_context_saver_get_regs instead of stop_registers.
1136 * infcall.h (struct dummy_frame_context_saver)
1137 (dummy_frame_context_saver_drop, dummy_frame_context_saver_cleanup)
1138 (dummy_frame_context_saver_get_regs, dummy_frame_context_saver_setup):
1140 * infcmd.c: Include infcall.h.
1141 (get_return_value): Add parameter ctx_saver, use it instead of
1143 (print_return_value): Add parameter ctx_saver, pass it.
1144 (struct finish_command_continuation_args): Add field ctx_saver.
1145 (finish_command_continuation): Update print_return_value caller.
1146 (finish_command_continuation_free_arg): Free also ctx_saver.
1147 (finish_forward): Call dummy_frame_context_saver_setup.
1148 * inferior.h (struct dummy_frame_context_saver): New declaration.
1149 (get_return_value): Add parameter ctx_saver.
1150 * python/py-finishbreakpoint.c (bpfinishpy_pre_stop_hook): Update
1151 get_return_value caller.
1153 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
1155 * dummy-frame.c (struct dummy_frame_dtor_list): New.
1156 (struct dummy_frame): Replace dtor and dtor_data by dtor_list.
1157 (remove_dummy_frame): Process dtor_list.
1158 (pop_dummy_frame): Process dtor_list.
1159 (register_dummy_frame_dtor): Maintain dtor_list.
1160 (find_dummy_frame_dtor): Handle dtor_list.
1161 * dummy-frame.h (register_dummy_frame_dtor, find_dummy_frame_dtor):
1164 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
1166 * compile/compile-object-run.c (do_module_cleanup): Add parameter
1168 (compile_object_run): Update do_module_cleanup caller.
1169 * dummy-frame.c: Include infcall.h.
1170 (struct dummy_frame): Update dtor comment.
1171 (remove_dummy_frame): Call dtor.
1172 (pop_dummy_frame): Update dtor caller.
1173 * dummy-frame.h (dummy_frame_dtor_ftype): Add parameter
1176 2015-05-13 Joel Brobecker <brobecker@adacore.com>
1180 2015-05-13 Joel Brobecker <brobecker@adacore.com>
1182 * NEWS: Create "Changes in GDB 7.9.1" section. Move news about
1183 Xmethods now being able to specify a result type to that new
1186 2015-05-13 Patrick Palka <patrick@parcs.ath.cx>
1188 * tui/tui-win.c (tui_async_resize_screen): Clear win_resized
1189 first before resizing the window.
1190 * tui/tui.c (tui_enable): Likewise.
1192 2015-05-13 Jan Kratochvil <jan.kratochvil@redhat.com>
1194 * dummy-frame.c (struct dummy_frame): Use proper typedef for dtor.
1195 * dummy-frame.h (dummy_frame_dtor_ftype): Add its comment.
1196 * infcall.c (call_function_by_hand_dummy): Use proper typedef for
1197 dummy_dtor parameter.
1198 * infcall.h: Include dummy-frame.h.
1199 (call_function_by_hand_dummy_dtor_ftype): Remove.
1200 (call_function_by_hand_dummy): Use proper typedef for dummy_dtor
1203 2015-05-13 Patrick Palka <patrick@parcs.ath.cx>
1206 * top.c (history_size_setshow_var): Change type to signed.
1207 Initialize to -2. Update documentation.
1208 (set_readline_history_size): Define.
1209 (set_history_size_command): Use it. Remove logic for handling
1211 (init_history): Use set_readline_history_size(). Test for a
1212 value of -2 instead of 0 when determining whether to set a
1213 default history size.
1214 (init_main): Decode the argument of the "size" command as a
1215 zuinteger_unlimited.
1217 2015-05-12 Doug Evans <dje@google.com>
1219 * dwarf2read.c (struct file_entry): Tweak comments.
1220 (get_debug_line_section): Tweak comments.
1222 2015-05-12 Don Breazeal <donb@codesourcery.com>
1224 * NEWS: Announce fork support in the RSP and support
1225 for fork debugging in extended mode.
1227 2015-05-12 Don Breazeal <donb@codesourcery.com>
1229 * remote.c (remote_insert_fork_catchpoint): New function.
1230 (remote_remove_fork_catchpoint): New function.
1231 (remote_insert_vfork_catchpoint): New function.
1232 (remote_remove_vfork_catchpoint): New function.
1233 (pending_fork_parent_callback): New function.
1234 (remove_new_fork_child): New function.
1235 (remote_update_thread_list): Call remote_notif_get_pending_events
1236 and remove_new_fork_child.
1237 (extended_remote_kill): Kill fork child when killing the
1238 parent before follow_fork completes.
1239 (init_extended_remote_ops): Initialize target vector with
1240 new fork catchpoint functions.
1242 2015-05-12 Don Breazeal <donb@codesourcery.com>
1244 * remote.c (remove_vfork_event_p): New function.
1245 (remote_follow_fork): Add vfork event type to event checking.
1246 (remote_parse_stop_reply): New stop reasons "vfork" and
1247 "vforkdone" for RSP 'T' Stop Reply Packet.
1249 2015-05-12 Don Breazeal <donb@codesourcery.com>
1251 * linux-nat.c (linux_nat_ptrace_options): New function.
1252 (linux_init_ptrace, wait_lwp, linux_nat_filter_event):
1253 Call linux_nat_ptrace_options and use different argument to
1254 linux_enable_event_reporting.
1255 (_initialize_linux_nat): Delete call to
1256 linux_ptrace_set_additional_flags.
1257 * nat/linux-ptrace.c (current_ptrace_options): Rename to
1258 supported_ptrace_options.
1259 (additional_flags): Delete variable.
1260 (linux_check_ptrace_features): Use supported_ptrace_options.
1261 (linux_test_for_tracesysgood, linux_test_for_tracefork):
1262 Likewise, and remove additional_flags check.
1263 (linux_enable_event_reporting): Change 'attached' argument to
1264 'options'. Use supported_ptrace_options.
1265 (ptrace_supports_feature): Change comment. Use
1266 supported_ptrace_options.
1267 (linux_ptrace_set_additional_flags): Delete function.
1268 * nat/linux-ptrace.h (linux_ptrace_set_additional_flags):
1269 Delete function prototype.
1270 * remote.c (remote_fork_event_p): New function.
1271 (remote_detach_pid): New function.
1272 (remote_detach_1): Call remote_detach_pid, don't mourn inferior
1273 if doing detach-on-fork.
1274 (remote_follow_fork): New function.
1275 (remote_parse_stop_reply): Handle new "T" stop reason "fork".
1276 (remote_pid_to_str): Print "process" strings for pid/0/0 ptids.
1277 (init_extended_remote_ops): Initialize to_follow_fork.
1279 2015-05-12 Don Breazeal <donb@codesourcery.com>
1281 * nat/linux-ptrace.c (linux_check_ptrace_features): Change
1282 from static to extern.
1283 * nat/linux-ptrace.h (linux_check_ptrace_features): Declare.
1284 * remote.c (anonymous enum): <PACKET_fork_event_feature,
1285 * PACKET_vfork_event_feature>: New enumeration constants.
1286 (remote_protocol_features): Add table entries for new packets.
1287 (remote_query_supported): Add new feature queries to qSupported
1290 2015-05-12 Gary Benson <gbenson@redhat.com>
1292 * remote.c (remote_add_inferior): Call exec_file_locate_attach
1293 for fake PIDs as well as real ones.
1294 (remote_pid_to_exec_file): Send empty annex if PID is fake.
1296 2015-05-09 Siva Chandra Reddy <sivachandra@google.com>
1298 * NEWS (Python Scripting): Mention the new gdb.Value methods.
1299 * python/py-value.c (valpy_reference_value): New function.
1300 (valpy_const_value): Likewise.
1301 (value_object_methods): Add new methods.
1302 * value.c (make_cv_value): New function.
1303 * value.h (make_cv_value): Declare.
1305 2015-05-08 Yao Qi <yao@codesourcery.com>
1306 Sandra Loosemore <sandra@codesourcery.com>
1308 * dwarf2read.c (setup_type_unit_groups): Do NULL pointer check
1309 to 'lh->include_dirs' before accessing to it.
1310 (psymtab_include_file_name): Likewise.
1311 (dwarf_decode_lines_1): Likewise.
1312 (dwarf_decode_lines): Likewise.
1313 (file_file_name): Likewise.
1315 2015-05-08 Sandra Loosemore <sandra@codesourcery.com>
1317 * nios2-linux-tdep.c (NIOS2_SIGRETURN_TRAMP_ADDR): Define.
1318 (NIOS2_SIGRETURN_REGSAVE_OFFSET): Define.
1319 (nios2_linux_rt_sigreturn_init): Adjust base address of
1322 2015-05-08 Sandra Loosemore <sandra@codesourcery.com>
1324 * nios2-tdep.c (nios2_breakpoint_from_pc): Revert to using
1325 "trap 31" as the breakpoint instruction on all targets.
1327 2015-05-08 Jan Kratochvil <jan.kratochvil@redhat.com>
1329 * infcmd.c (print_return_value): Remove unused declaration.
1331 2015-05-08 Joel Brobecker <brobecker@adacore.com>
1333 * dwarf2read.c (attr_to_dynamic_prop)
1334 <DW_AT_data_member_location>: Use read_type_die isntead of
1337 2015-05-08 Joel Brobecker <brobecker@adacore.com>
1339 * ada-lang.c (ada_convert_actual): Add handling of formals
1340 passed inside an aligner type.
1342 2015-05-08 Joel Brobecker <brobecker@adacore.com>
1344 * copyright.py (NOT_FSF_LIST): Remove sim/erc32 entries.
1346 2015-05-08 Siva Chandra Reddy <sivachandra@google.com>
1349 * python/lib/gdb/command/xmethods.py (print_xm_info): Fix typo.
1350 Print xmethod matcher status.
1352 2015-05-08 Andreas Arnez <arnez@linux.vnet.ibm.com>
1354 * s390-linux-nat.c (fill_gregset): Avoid relying on the PSWA
1355 register in the regcache when treating the PSWM register, and vice
1358 2015-05-07 Gary Benson <gbenson@redhat.com>
1360 * linux-thread-db.c (struct thread_db_info)
1361 <td_ta_map_id2thr_p>: Remove field.
1362 (try_thread_db_load_1): Remove initialization for the above.
1364 2015-05-07 Gary Benson <gbenson@redhat.com>
1366 * linux-thread-db.c (struct thread_db_info)
1367 <td_thr_validate_p>: Remove field.
1368 (try_thread_db_load_1): Remove initialization for the above.
1370 2015-05-06 Jan Kratochvil <jan.kratochvil@redhat.com>
1372 * compile/compile-object-load.c (compile_object_load): Support
1375 2015-05-06 Jan Kratochvil <jan.kratochvil@redhat.com>
1377 * compile/compile.c (compile_to_object): Make the cmd_string parameter
1378 const. Use new variables for the const compatibility.
1379 (eval_compile_command): Make the cmd_string parameter const.
1380 * compile/compile.h (eval_compile_command): Make the cmd_string
1383 2015-05-06 Joel Brobecker <brobecker@adacore.com>
1385 * defs.h (deprecated_init_ui_hook): Delete. Remove associated
1387 * top.c (deprecated_init_ui_hook): Delete.
1388 (gdb_init): Remove handling of deprecated_init_ui_hook.
1389 * interps.c (clear_interpreter_hooks): Remove handling of
1390 deprecated_init_ui_hook.
1391 * main.c (captured_main): Update comment.
1393 2015-05-06 Joel Brobecker <brobecker@adacore.com>
1395 * solib.c (_initialize_solib): Add "info dll" alias creation.
1396 * windows-nat.c (set_windows_aliases): Delete.
1397 (_initialize_windows_nat): Remove deprecated_init_ui_hook
1399 * NEWS: Add news entry about "info dll" now being available
1402 2015-05-05 Joel Brobecker <brobecker@adacore.com>
1404 * ada-lang.c (value_assign_to_component): Reformat and improve
1405 documentation. Remove all trailing spaces.
1407 2015-05-05 Joel Brobecker <brobecker@adacore.com>
1409 * inline-frame.c (inline_frame_sniffer, skip_inline_frames):
1410 Stop counting inlined frames as soon as an out-of-line function
1413 2014-05-05 Pierre-Marie de Rodat <derodat@adacore.com>
1415 * dwarf2read.c (inherit_abstract_dies): Skip
1416 DW_TAG_GNU_call_site dies while inheriting children of an
1417 abstract DIE into a scope.
1418 (read_lexical_block_scope): Inherit abstract DIE's for
1421 2015-05-05 Joel Brobecker <brobecker@adacore.com>
1423 * ada-valprint.c (val_print_packed_array_elements): Delete
1424 variable "len". Add a type-length check when comparing two
1425 consecutive elements of the array. Use the element's actual
1426 length in call to value_contents_eq.
1427 * ada-lang.c (ada_value_primitive_packed_val): Always return
1428 a value whose type has been resolved.
1430 2015-05-05 Joel Brobecker <brobecker@adacore.com>
1432 * ada-lang.c (ada_value_primitive_packed_val): Recompute
1433 BIT_SIZE and LEN if the size of the resolved type is smaller
1434 than BIT_SIZE * HOST_CHAR_BIT.
1436 2015-05-05 Joel Brobecker <brobecker@adacore.com>
1438 * ada-lang.c (ada_value_primitive_packed_val): Use a more
1439 correct address in call to value_at. Adjust call to
1440 value_address accordingly.
1442 2015-05-05 Joel Brobecker <brobecker@adacore.com>
1444 * ada-valprint.c (ada_val_print_1): Resolve TYPE before trying
1447 2015-05-05 Joel Brobecker <brobecker@adacore.com>
1449 * dwarf2loc.h (struct property_addr_info): Add "valaddr" field.
1450 * dwarf2loc.c (dwarf2_evaluate_property): Add handling of
1452 * gdbtypes.h (resolve_dynamic_type): Add "valaddr" parameter.
1453 * gdbtypes.c (resolve_dynamic_struct): Set pinfo.valaddr.
1454 (resolve_dynamic_type_internal): Set pinfo.valaddr.
1455 Add handling of addr_stack->valaddr.
1456 (resolve_dynamic_type): Add "valaddr" parameter.
1457 Set pinfo.valaddr field.
1458 * ada-lang.c (ada_discrete_type_high_bound): Update call to
1459 resolve_dynamic_type.
1460 (ada_discrete_type_low_bound): Likewise.
1461 * findvar.c (default_read_var_value): Likewise.
1462 * value.c (value_from_contents_and_address): Likewise.
1464 2015-05-05 Joel Brobecker <brobecker@adacore.com>
1466 * gdbtypes.c (resolve_dynamic_array): Use
1467 create_array_type_with_stride instead of create_array_type.
1469 2015-04-30 DJ Delorie <dj@redhat.com>
1471 * rl78-tdep.c (rl78_analyze_prologue): Pass RL78_ISA_DEFAULT to
1474 2015-04-29 Doug Evans <dje@google.com>
1477 * NEWS: Document new gdb.XMethodWorker.get_result_type method.
1478 * eval.c (evaluate_subexp_standard) <OP_FUNCALL>: Handle
1479 EVAL_AVOID_SIDE_EFFECTS for xmethods.
1480 * extension-priv.h (struct extension_language_ops)
1481 <get_xmethod_result_type>: New member.
1482 * extension.c (get_xmethod_result_type): New function.
1483 * extension.h (get_xmethod_result_type): Declare.
1484 * python/py-xmethods.c (get_result_type_method_name): New static
1486 (py_get_result_type_method_name): Ditto.
1487 (gdbpy_get_xmethod_result_type): New function.
1488 (gdbpy_initialize_xmethods): Initialize py_get_result_type_method_name.
1489 * python/python-internal.h (gdbpy_get_xmethod_result_type): Declare.
1490 * python/python.c (python_extension_ops): Add
1491 gdbpy_get_xmethod_result_type.
1492 * python/lib/gdb/xmethod.py (XMethodWorker): Add get_result_type.
1493 * valarith.c (value_x_binop): Handle EVAL_AVOID_SIDE_EFFECTS for
1495 (value_x_unop): Ditto.
1496 * value.c (result_type_of_xmethod): New function.
1497 * value.h (result_type_of_xmethod): Declare.
1499 2015-04-29 Gary Benson <gbenson@redhat.com>
1501 * solib.c (solib_find_1): Allow fd argument to be NULL.
1502 (exec_file_find): Update comment.
1503 (solib_find): Likewise.
1504 * exec.c (exec_file_locate_attach): Use NULL as fd
1505 argument to exec_file_find to avoid having to close
1507 * infrun.c (follow_exec): Likewise.
1509 2015-04-28 Doug Evans <dje@google.com>
1512 * python/lib/gdb/printing.py (register_pretty_printer): Handle
1513 name or __name__ attributes. Handle gdb module as first argument.
1515 2015-04-28 Doug Evans <dje@google.com>
1518 * python/py-prettyprint.c (print_children): Verify result of children
1519 iterator. Provide better error message.
1520 * python/python-internal..h (gdbpy_print_python_errors_p): Declare.
1521 * python/python.c (gdbpy_print_python_errors_p): New function.
1523 2015-04-28 Doug Evans <dje@google.com>
1525 * gdbtypes.h (struct cplus_struct_type) <n_baseclasses>: Fix comment.
1527 2015-04-28 Sasha Smundak <asmundak@google.com>
1529 * NEWS: Mention gdb.Type.optimized_out method.
1530 * python/py-type.c (typy_optimized_out): New function.
1532 2015-04-28 John Baldwin <jhb@FreeBSD.org>
1534 * fbsd-nat.c: Include "gdb_wait.h" instead of <sys/wait.h>.
1536 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
1538 * utils.c (init_page_info): Set rl_catch_sigwinch to zero.
1539 (initialize_utils): Move call of init_page_info() to ...
1540 * top.c (gdb_init): ... here.
1542 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
1544 * tui/tui-win.c (tui_sigwinch_handler): Remove now-stale comment.
1545 (tui_sigwinch_handler): Still update our idea of
1546 the terminal's width and height even when TUI is not active.
1548 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
1550 * utils.h (set_screen_width_and_height): Declare.
1551 * utils.c (set_screen_width_and_height): Define.
1552 * tui/tui-win.c (tui_update_gdb_sizes): Use it.
1554 2015-04-28 Gary Benson <gbenson@redhat.com>
1556 * infrun.c (solist.h): New include.
1557 (follow_exec): Use exec_file_find to prefix execd_pathname
1560 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
1562 * tui/tui-source.c (tui_set_source_content): Avoid calling
1563 strcpy() when offset is 0.
1565 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
1568 * tui/tui-data.c (tui_free_window): Don't free the locator
1569 window when passed an SRC_WIN or a DISASSEM_WIN.
1571 2015-04-28 Patrick Palka <patrick@parcs.ath.cx>
1573 * tui/tui-data.h (struct tui_win_element): Forward-declare.
1574 (tui_win_content): Move declaration.
1575 (struct tui_gen_win_info): Give 'content' field the
1576 type tui_win_content.
1577 * tui/tui-data.c (init_content_element): Remove redundant and
1579 (tui_add_content_elements): Remove erroneous cast.
1580 * tui/tui-disasm.c (tui_set_disassem_content): Remove redundant
1582 (tui_get_begin_asm_address): Likewise.
1583 * tui/tui-regs.c (tui_show_registers): Likewise.
1584 (tui_show_register_group): Likewise.
1585 (tui_display_registers_from): Likewise.
1586 (tui_check_register_values): Likewise.
1587 * tui/tui-source.c (tui_set_source_content): Likewise.
1588 (tui_set_source_content_nil): Likewise.
1589 (tui_source_is_displayed): Likewise.
1590 * tui/tui-stack.c (tui_show_locator_content): Likewise.
1591 (tui_set_locator_fullname): Likewise.
1592 (tui_set_locator_info): Likewise.
1593 (tui_show_frame_info): Likewise.
1594 * tui/tui-winsource.c (tui_clear_source_content): Likewise.
1595 (tui_show_source_line): Likewise.
1596 (tui_horizontal_source_scroll): Likewise.
1597 (tui_update_breakpoint_info): Likewise.
1598 (tui_set_exec_info_content): Likewise.
1599 (tui_show_exec_info_content): Likewise.
1600 (tui_alloc_source_buffer): Likewise.
1601 (tui_line_is_displayed): Likewise.
1602 (tui_addr_is_displayed): Likewise.
1604 2015-04-27 John Baldwin <jhb@FreeBSD.org>
1606 * fbsd-nat.c: (fbsd_wait) [PL_FLAG_EXEC]: Report TARGET_WAITKIND_EXECD
1607 event if PL_FLAG_EXEC is set.
1608 [PL_FLAG_EXEC] (fbsd_insert_exec_catchpoint): New function.
1609 [PL_FLAG_EXEC] (fbsd_remove_exec_catchpoint): New function.
1610 (fbsd_nat_add_target) [PL_FLAG_EXEC]: Set
1611 "to_insert_exec_catchpoint" to "fbsd_insert_exec_catchpoint".
1612 Set "to_remove_exec_catchpoint" to "fbsd_remove_exec_catchpoint".
1614 2015-04-27 John Baldwin <jhb@FreeBSD.org>
1616 * fbsd-nat.c: [PT_LWPINFO] New variable super_wait.
1617 [TDP_RFPPWAIT] New variable fbsd_pending_children.
1618 [TDP_RFPPWAIT] (fbsd_remember_child): New function.
1619 [TDP_RFPPWAIT] (fbsd_is_child_pending): New function.
1620 [TDP_RFPPWAIT] (fbsd_fetch_kinfo_proc): New function.
1621 [PT_LWPINFO] (fbsd_wait): New function.
1622 [TDP_RFPPWAIT] (fbsd_follow_fork): New function.
1623 [TDP_RFPPWAIT] (fbsd_insert_fork_catchpoint): New function.
1624 [TDP_RFPPWAIT] (fbsd_remove_fork_catchpoint): New function.
1625 [TDP_RFPPWAIT] (fbsd_insert_vfork_catchpoint): New function.
1626 [TDP_RFPPWAIT] (fbsd_remove_vfork_catchpoint): New function.
1627 [TDP_RFPPWAIT] (fbsd_enable_follow_fork): New function.
1628 [TDP_RFPPWAIT] (fbsd_post_startup_inferior): New function.
1629 [TDP_RFPPWAIT] (fbsd_post_attach): New function.
1630 (fbsd_nat_add_target) [PT_LWPINFO] Set "to_wait" to
1632 [TDP_RFPPWAIT] Set "to_follow_fork" to "fbsd_follow_fork".
1633 Set "to_insert_fork_catchpoint" to "fbsd_insert_fork_catchpoint".
1634 Set "to_remove_fork_catchpoint" to "fbsd_remove_fork_catchpoint".
1635 Set "to_insert_vfork_catchpoint" to "fbsd_insert_vfork_catchpoint".
1636 Set "to_remove_vfork_catchpoint" to "fbsd_remove_vfork_catchpoint".
1637 Set "to_post_startup_inferior" to "fbsd_post_startup_inferior".
1638 Set "to_post_attach" to "fbsd_post_attach".
1640 2015-04-27 John Baldwin <jhb@FreeBSD.org>
1642 * fbsd-nat.c (fbsd_pid_to_exec_file): Mark static.
1643 (fbsd_find_memory_regions): Mark static.
1644 (fbsd_nat_add_target): New function.
1645 * fbsd-nat.h: Export fbsd_nat_add_target and remove prototypes for
1646 fbsd_pid_to_exec_file and fbsd_find_memory_regions.
1647 * amd64fbsd-nat.c (_initialize_amd64fbsd_nat): Use fbsd_nat_add_target.
1648 * i386fbsd-nat.c (_initialize_i386fbsd_nat): Likewise.
1649 * ppcfbsd-nat.c (_initialize_ppcfbsd_nat): Likewise.
1650 * sparc64fbsd-nat.c (_initialize_sparc64fbsd_nat): Likewise.
1652 2015-04-27 Gary Benson <gbenson@redhat.com>
1654 * objfiles.c (allocate_objfile): Do not attempt to expand name
1655 if name is a "target:" filename.
1656 * auto-load.c (load_auto_scripts_for_objfile): Do not attempt
1657 to load auto-load scripts for objfiles with "target:" filenames.
1659 2015-04-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
1661 * s390-linux-tdep.c: Include "elf/s390.h" and "elf-bfd.h".
1662 (enum s390_vector_abi_kind): New enum.
1663 (struct gdbarch_tdep)<vector_abi>: New field.
1664 (s390_effective_inner_type): Add parameter min_size. Stop
1665 unwrapping if the inner type is smaller than min_size.
1666 (s390_function_arg_float): Adjust call to
1667 s390_effective_inner_type.
1668 (s390_function_arg_vector): New function.
1669 (s390_function_arg_integer): Adjust comment.
1670 (struct s390_arg_state)<vr>: New field.
1671 (s390_handle_arg): Add parameter 'is_unnamed'. Pass vector
1672 arguments according to vector ABI when appropriate.
1673 (s390_push_dummy_call): Initialize the argument state's field
1674 'vr'. Adjust calls to s390_handle_arg.
1675 (s390_register_return_value): Handle vector return values.
1676 (s390_return_value): Apply the "register" return value convention
1677 to a vector when appropriate.
1678 (s390_gdbarch_init): Initialize tdep->vector_abi.
1679 * NEWS: Announce S390 vector ABI support.
1681 2015-04-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
1683 * s390-linux-tdep.c (s390_return_value_convention): Remove
1684 function. Inline its logic...
1685 (s390_return_value): ...here. Instead, move the handling of the
1686 "register" return value convention...
1687 (s390_register_return_value): ...here. New function.
1689 2015-04-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
1692 (is_float_singleton): Remove function. Move the "singleton" part
1694 (s390_effective_inner_type): ...here. New function.
1695 (is_float_like): Remove function. Inline its logic...
1696 (s390_function_arg_float): ...here.
1697 (is_pointer_like, is_integer_like, is_struct_like): Remove
1698 functions. Inline their logic...
1699 (s390_function_arg_integer): ...here.
1700 (s390_function_arg_pass_by_reference): Remove function.
1701 (extend_simple_arg): Remove function.
1702 (alignment_of): Remove function.
1703 (struct s390_arg_state): New structure.
1704 (s390_handle_arg): New function.
1705 (s390_push_dummy_call): Move parameter placement logic to the new
1706 function s390_handle_arg. Call it for calculating the stack area
1707 sizes first, and again for actually writing the parameters.
1709 2015-04-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
1711 * s390-linux-tdep.c (is_power_of_two): Add comment. Return
1712 false if the argument is zero.
1714 2015-04-27 Pierre-Marie de Rodat <derodat@adacore.com>
1716 * ada-lang.c (template_to_static_fixed_type): Return input type
1717 when it is already fixed. Cache the input type itself when not
1718 creating a static fixed copy. Make it explicit that we never
1719 molestate the input type.
1720 * gdbtypes.c (resolve_dynamic_struct): Reset the
1721 TYPE_TARGET_TYPE field for resolved copies.
1723 2015-04-27 Joel Brobecker <brobecker@adacore.com>
1725 * ada-lang.c (ada_is_tagged_type): Add call to ada_check_typedef.
1726 (ada_lookup_struct_elt_type): Remove calls to ada_check_typedef.
1727 (template_to_static_fixed_type): Call ada_check_typedef only
1730 2015-04-24 Andrew Burgess <andrew.burgess@embecosm.com>
1732 * cli/cli-dump.c (srec_dump_command): Add internationalization
1734 (ihex_dump_command): Likewise.
1735 (tekhex_dump_command): Likewise.
1736 (binary_dump_command): Likewise.
1737 (binary_append_command): Likewise.
1739 2015-04-24 Andrew Burgess <andrew.burgess@embecosm.com>
1741 * cli/cli-dump.c (verilog_cmdlist): New variable.
1742 (dump_verilog_memory): New function.
1743 (dump_verilog_value): New function.
1744 (verilog_dump_command): New function.
1745 (_initialize_cli_dump): Add new commands to support verilog dump
1747 * NEWS: Add entry for "dump verilog".
1749 2015-04-24 Pierre-Marie de Rodat <derodat@adacore.com>
1751 * gdbtypes.c (print_gnat_stuff): Do not recurse on the
1752 descriptive type when there is none.
1754 2015-04-23 Patrick Palka <patrick@parcs.ath.cx>
1756 * tui/tui-win.c (tui_async_resize_screen): Call
1757 rl_resize_terminal().
1759 2015-04-22 Jon Turney <jon.turney@dronecode.org.uk>
1761 * windows-nat.c (handle_output_debug_string): Don't change
1762 current_event.dwThreadId.
1763 (get_windows_debug_event): Use thread_id, rather than relying on
1764 current_event.dwThreadId being changed.
1766 2015-04-22 Jon Turney <jon.turney@dronecode.org.uk>
1768 * windows-nat.c (windows_continue): Report an error if
1769 ContinueDebugEvent() fails.
1771 2015-04-16 Jon Turney <jon.turney@dronecode.org.uk>
1773 * windows-nat.c (windows_resume): Fix misspelling in debug output.
1775 2015-04-16 Jon Turney <jon.turney@dronecode.org.uk>
1777 * windows-nat.c (get_windows_debug_event): Replace retval with
1778 thread_id throughout. Update stale comment.
1780 2015-04-16 Jon Turney <jon.turney@dronecode.org.uk>
1782 * windows-nat.c (get_windows_debug_event): Don't use ternary
1783 conditional operator.
1785 2015-04-21 Pierre Muller <muller@sourceware.org>
1788 p-exp.y (yylex): Reorganize code to return the matched pattern
1789 for a field of this.
1791 2015-04-21 Gary Benson <gbenson@redhat.com>
1793 * common/fileio.h (fileio_to_host_openflags): New declaration.
1794 * common/fileio.c (fcntl.h): New include.
1795 (fileio_to_host_openflags): New function, factored out from...
1796 * inf-child.c (inf_child_fileio_open_flags_to_host): ...here.
1799 2015-04-21 Kevin Buettner <kevinb@redhat.com>
1801 * rl78-tdep.c (RL78_SP_ADDR): Define.
1802 (opc_reg_to_gdb_regnum): New static function.
1803 (rl78_analyze_prologue): Recognize instructions forming slightly
1804 more interesting prologues.
1806 2015-04-20 Pierre-Marie de Rodat <derodat@adacore.com>
1809 2015-04-03 Pierre-Marie de Rodat <derodat@adacore.com>
1810 * gdbtypes.c (is_dynamic_type_internal): Remove special handling of
1811 TYPE_CODE_REF types so that they are not considered as dynamic
1812 depending on the referenced type.
1813 (resolve_dynamic_type_internal): Likewise.
1815 2015-04-20 Pierre-Marie de Rodat <derodat@adacore.com>
1818 2015-04-03 Pierre-Marie de Rodat <derodat@adacore.com>
1819 * gdbtypes.c (is_dynamic_type_internal): Remove the unused
1820 "top_level" parameter.
1821 (resolve_dynamic_type_internal): Remove the unused "top_level"
1822 parameter. Update call to is_dynamic_type_internal.
1823 (is_dynamic_type): Update call to is_dynamic_type_internal.
1824 (resolve_dynamic_range): Update call to
1825 resolve_dynamic_type_internal.
1826 (resolve_dynamic_union): Likewise.
1827 (resolve_dynamic_struct): Likewise.
1828 (resolve_dynamic_type): Likewise.
1830 2015-04-19 Gabriel Krisman Bertazi <gabriel@krisman.be>
1832 * breakpoint.c (update_dprintf_command_list): Remove duplicated
1835 2015-04-20 Thomas Schwinge <thomas@codesourcery.com>
1837 * reply_mig_hack.awk: Robustify parsing.
1839 * reply_mig_hack.awk: Don't bother to declare an intermediate
1840 function pointer variable.
1842 2015-04-17 Doug Evans <dje@google.com>
1844 * solib-svr4.c (svr4_exec_displacement): Rename outer "displacement"
1845 to "exec_displacement" to avoid confusion with inner use of the name.
1847 2015-04-17 Pedro Alves <palves@redhat.com>
1849 * arm-linux-nat.c (arm_linux_can_use_hw_breakpoint): Return zero
1850 if HW point of TYPE isn't supported.
1852 2015-04-17 Yao Qi <yao.qi@linaro.org>
1853 Pedro Alves <palves@redhat.com>
1855 * target.h (target_can_use_hardware_watchpoint): Update comments.
1856 Remove trailing ";".
1858 2015-04-17 Gary Benson <gbenson@redhat.com>
1860 * remote.c (remote_add_inferior): New argument try_open_exec.
1861 If nonzero, attempt to open the inferior's executable file as
1862 the main executable if no main executable is open already.
1863 All callers updated.
1864 * NEWS: Mention that GDB now supports automatic location and
1865 retrieval of executable + files from remote targets.
1867 2015-04-17 Gary Benson <gbenson@redhat.com>
1869 * target.h (TARGET_OBJECT_EXEC_FILE): New enum value.
1870 * remote.c (PACKET_qXfer_exec_file): Likewise.
1871 (remote_protocol_features): Register the
1872 "qXfer:exec-file:read" feature.
1873 (remote_xfer_partial): Handle TARGET_OBJECT_EXEC_FILE.
1874 (remote_pid_to_exec_file): New function.
1875 (init_remote_ops): Initialize to_pid_to_exec_file.
1876 (_initialize_remote): Register new "set/show remote
1877 pid-to-exec-file-packet" command.
1878 * NEWS: Announce new qXfer:exec-file:read packet.
1880 2015-04-17 Gary Benson <gbenson@redhat.com>
1882 * nat/linux-procfs.h (linux_proc_pid_to_exec_file):
1884 * nat/linux-procfs.c (linux_proc_pid_to_exec_file):
1885 New function, factored out from...
1886 * linux-nat.c (linux_child_pid_to_exec_file): ...here.
1888 2015-04-17 Gary Benson <gbenson@redhat.com>
1890 * exec.c (solist.h): New include.
1891 (exec_file_locate_attach): Prefix absolute executable
1892 paths with gdb_sysroot if set.
1893 * NEWS: Mention that executable paths may be prepended
1896 2015-04-17 Gary Benson <gbenson@redhat.com>
1898 * solist.h (exec_file_find): New declaration.
1899 * solib.c (solib_find_1): New function, factored out from...
1900 (solib_find): ...here.
1901 (exec_file_find): New function.
1903 2015-04-17 Gary Benson <gbenson@redhat.com>
1905 * gdbcore.h (exec_file_locate_attach): New declaration.
1906 * exec.c (exec_file_locate_attach): New function, factored
1908 * infcmd.c (attach_command_post_wait): ...here.
1910 2015-04-17 Mike Frysinger <vapier@gentoo.org>
1912 * MAINTAINERS: Add myself for Blackfin/write-after-approval.
1914 2015-04-16 Yao Qi <yao.qi@linaro.org>
1916 * infrun.c (maybe_software_singlestep): Declare.
1917 (displaced_step_fixup): Call maybe_software_singlestep.
1919 2015-04-15 Doug Evans <dje@google.com>
1921 * psymtab.c (psym_expand_symtabs_matching): Add QUIT call.
1923 2015-04-15 Doug Evans <dje@google.com>
1925 * dwarf2read.c (dw2_expand_symtabs_matching): Add some QUIT calls.
1927 2015-04-15 Simon Marchi <simon.marchi@ericsson.com>
1929 * python/lib/gdb/command/unwinders.py: Add parentheses.
1931 2015-04-15 Yao Qi <yao.qi@linaro.org>
1933 * arm-linux-tdep.c (arm_linux_copy_svc): Update debug message.
1935 2015-04-15 Yao Qi <yao.qi@linaro.org>
1937 * arm-linux-tdep.c (arm_linux_copy_svc): Fix indentation.
1939 2015-04-15 Yao Qi <yao.qi@linaro.org>
1941 * arm-linux-tdep.c (arm_linux_cleanup_svc): Use
1942 dsc->insn_size instead of 4.
1944 2015-04-14 Gary Benson <gbenson@redhat.com>
1946 * jit.c (mem_bfd_iovec_stat): Zero supplied buffer.
1947 * minidebug.c (lzma_stat): Likewise.
1948 * solib-spu.c (spu_bfd_iovec_stat): Likewise.
1949 * spu-linux-nat.c (spu_bfd_iovec_stat): Likewise.
1951 2015-04-13 Stan Shebs <stanshebs@google.com>
1953 * MAINTAINERS: Update my email address.
1955 2015-04-13 John Baldwin <jhb@FreeBSD.org>
1957 * amd64-tdep.c (amd64_target_description): New function.
1958 * amd64-tdep.h: Export amd64_target_description and tdesc_amd64.
1959 * amd64bsd-nat.c [PT_GETXSTATE_INFO]: New variable amd64bsd_xsave_len.
1960 (amd64bsd_fetch_inferior_registers) [PT_GETXSTATE_INFO]: Handle
1961 x86 extended save area.
1962 (amd64bsd_store_inferior_registers) [PT_GETXSTATE_INFO]: Likewise.
1963 * amd64bsd-nat.h: Export amd64bsd_xsave_len.
1964 * amd64fbsd-nat.c (amd64fbsd_read_description): New function.
1965 (_initialize_amd64fbsd_nat): Set "to_read_description" to
1966 "amd64fbsd_read_description".
1967 * amd64fbsd-tdep.c (amd64fbsd_core_read_description): New function.
1968 (amd64fbsd_supply_xstateregset): New function.
1969 (amd64fbsd_collect_xstateregset): New function.
1970 Add "amd64fbsd_xstateregset".
1971 (amd64fbsd_iterate_over_regset_sections): New function.
1972 (amd64fbsd_init_abi): Set "xsave_xcr0_offset" to
1973 "I386_FBSD_XSAVE_XCR0_OFFSET".
1974 Add "iterate_over_regset_sections" gdbarch method.
1975 Add "core_read_description" gdbarch method.
1976 * i386-tdep.c (i386_target_description): New function.
1977 * i386-tdep.h: Export i386_target_description and tdesc_i386.
1978 * i386bsd-nat.c [PT_GETXSTATE_INFO]: New variable i386bsd_xsave_len.
1979 (i386bsd_fetch_inferior_registers) [PT_GETXSTATE_INFO]: Handle
1980 x86 extended save area.
1981 (i386bsd_store_inferior_registers) [PT_GETXSTATE_INFO]: Likewise.
1982 * i386bsd-nat.h: Export i386bsd_xsave_len.
1983 * i386fbsd-nat.c (i386fbsd_read_description): New function.
1984 (_initialize_i386fbsd_nat): Set "to_read_description" to
1985 "i386fbsd_read_description".
1986 * i386fbsd-tdep.c (i386fbsd_core_read_xcr0): New function.
1987 (i386fbsd_core_read_description): New function.
1988 (i386fbsd_supply_xstateregset): New function.
1989 (i386fbsd_collect_xstateregset): New function.
1990 Add "i386fbsd_xstateregset".
1991 (i386fbsd_iterate_over_regset_sections): New function.
1992 (i386fbsd4_init_abi): Set "xsave_xcr0_offset" to
1993 "I386_FBSD_XSAVE_XCR0_OFFSET".
1994 Add "iterate_over_regset_sections" gdbarch method.
1995 Add "core_read_description" gdbarch method.
1996 * i386fbsd-tdep.h: New file.
1998 2015-04-11 Jan Kratochvil <jan.kratochvil@redhat.com>
2000 * NEWS (Changes since GDB 7.9): Add removed -xdb.
2001 * breakpoint.c (command_line_is_silent): Remove xdb_commands
2003 (_initialize_breakpoint): Remove xdb_commands for bc, ab, sb, db, ba
2005 * cli/cli-cmds.c (_initialize_cli_cmds): Remove xdb_commands for v and
2007 * cli/cli-decode.c (find_command_name_length): Remove xdb_commands
2009 * defs.h (xdb_commands): Remove declaration.
2010 * f-valprint.c (_initialize_f_valprint): Remove xdb_commands for lc.
2011 * guile/scm-cmd.c (command_classes): Remove xdb from comment.
2012 * infcmd.c (run_no_args_command, go_command): Remove.
2013 (_initialize_infcmd): Remove xdb_commands for S, go, g, R and lr.
2014 * infrun.c (xdb_handle_command): Remove.
2015 (_initialize_infrun): Remove xdb_commands for lz and z.
2016 * main.c (xdb_commands): Remove variable.
2017 (captured_main): Remove "xdb" from long_options.
2018 (print_gdb_help): Remove --xdb from help.
2019 * python/py-cmd.c (gdbpy_initialize_commands): Remove xdb from comment.
2020 * source.c (_initialize_source): Remove xdb_commands for D, ld, / and ?.
2021 * stack.c (backtrace_full_command, args_plus_locals_info)
2022 (current_frame_command): Remove.
2023 (_initialize_stack): Remove xdb_commands for t, T and l.
2024 * symtab.c (_initialize_symtab): Remove xdb_commands for lf and lg.
2025 * thread.c (_initialize_thread): Remove xdb_commands condition.
2026 * tui/tui-layout.c (tui_toggle_layout_command)
2027 (tui_toggle_split_layout_command, tui_handle_xdb_layout): Remove.
2028 (_initialize_tui_layout): Remove xdb_commands for td and ts.
2029 * tui/tui-regs.c (tui_scroll_regs_forward_command)
2030 (tui_scroll_regs_backward_command): Remove.
2031 (_initialize_tui_regs): Remove xdb_commands for fr, gr, sr, +r and -r.
2032 * tui/tui-win.c (tui_xdb_set_win_height_command): Remove.
2033 (_initialize_tui_win): Remove xdb_commands for U and w.
2034 * utils.c (pagination_on_command, pagination_off_command): Remove.
2035 (initialize_utils): Remove xdb_commands for am and sm.
2037 2015-04-10 Pedro Alves <palves@redhat.com>
2039 * infrun.c (displaced_step_fixup): Switch to the event ptid
2040 earlier. If the thread stopped for a watchpoint and the
2041 target/arch has non-continuable watchpoints, cancel the displaced
2043 (resume): Don't start a displaced step if in-line step-over info
2046 2015-04-10 Pedro Alves <palves@redhat.com>
2048 * infrun.c (displaced_step_in_progress): New function.
2049 (do_target_resume): Advise target to report all signals if
2052 2015-04-10 Pedro Alves <palves@redhat.com>
2055 * infrun.c (process_event_stop_test): Don't assume a step-resume
2056 is set if tp->stepped_breakpoint is true.
2058 2015-04-10 Yao Qi <yao.qi@linaro.org>
2060 * arm-tdep.c (install_alu_reg): Update comment.
2061 (thumb_copy_alu_reg): Remove local variable rn. Update
2062 debugging message. Use r2 instead of r1 in the modified
2065 2015-04-10 Pedro Alves <palves@redhat.com>
2068 * amd64-linux-tdep.c (amd64_linux_init_abi_common): Install
2069 linux_displaced_step_location as gdbarch_displaced_step_location
2071 * arm-linux-tdep.c (arm_linux_init_abi): Likewise.
2072 * i386-linux-tdep.c (i386_linux_init_abi): Likewise.
2073 * linux-tdep.c (linux_displaced_step_location): New function,
2074 based on ppc_linux_displaced_step_location.
2075 * linux-tdep.h (linux_displaced_step_location): New declaration.
2076 * ppc-linux-tdep.c (ppc_linux_entry_point_addr): Delete.
2077 (ppc_linux_inferior_created, ppc_linux_displaced_step_location):
2079 (ppc_linux_init_abi): Install linux_displaced_step_location as
2080 gdbarch_displaced_step_location hook, even without Cell/B.E..
2081 (_initialize_ppc_linux_tdep): Don't install
2082 ppc_linux_inferior_created as inferior_created observer.
2083 * s390-linux-tdep.c (s390_gdbarch_init): Install
2084 linux_displaced_step_location as gdbarch_displaced_step_location
2087 2015-04-09 Gary Benson <gbenson@redhat.com>
2089 * common/common-remote-fileio.h: Rename to...
2090 * common/fileio.h: ...this. Update all references.
2091 (remote_fileio_to_fio_error): Rename to...
2092 (host_to_fileio_error): ...this.
2093 (remote_fileio_to_be): Rename to...
2094 (host_to_bigendian): ...this. Update all callers.
2095 (remote_fileio_to_fio_uint): Rename to...
2096 (host_to_fileio_uint): ...this. Update all callers.
2097 (remote_fileio_to_fio_time): Rename to...
2098 (host_to_fileio_time): ...this. Update all callers.
2099 (remote_fileio_to_fio_stat): Rename to...
2100 (host_to_fileio_stat): ...this.
2101 Update all references.
2102 * common/common-remote-fileio.c: Rename to...
2103 * common/fileio.c: ...this. Update all references.
2104 (remote_fileio_to_fio_error): Rename to...
2105 (host_to_fileio_error): ...this. Update all callers.
2106 (remote_fileio_mode_to_target): Rename to...
2107 (fileio_mode_pack): ...this. Update all callers.
2108 (remote_fileio_to_fio_mode): Rename to...
2109 (host_to_fileio_mode): ...this. Update all callers.
2110 (remote_fileio_to_fio_ulong): Rename to...
2111 (host_to_fileio_ulong): ...this. Update all callers.
2112 (remote_fileio_to_fio_stat): Rename to...
2113 (host_to_fileio_stat): ...this. Update all callers.
2115 2015-04-09 Andy Wingo <wingo@igalia.com>
2117 * guile/scm-frame.c (gdbscm_frame_read_register): New function.
2118 (frame_functions): Bind gdbscm_frame_read_register to
2119 frame-read-register.
2120 * guile/lib/gdb.scm (frame-read-register): Export.
2122 2015-04-09 Gary Benson <gbenson@redhat.com>
2124 * common/common-remote-fileio.h (remote_fileio_to_fio_error):
2126 * common/common-remote-fileio.c (remote_fileio_to_fio_error):
2127 New function, factored out the named functions below.
2128 * inf-child.c (gdb/fileio.h): Remove include.
2129 (common-remote-fileio.h): New include.
2130 (inf_child_errno_to_fileio_error): Remove function. Update
2131 all callers to use remote_fileio_to_fio_error.
2132 * remote-fileio.c (remote_fileio_errno_to_target): Likewise.
2134 2015-04-09 Andy Wingo <wingo@igalia.com>
2136 * MAINTAINERS (Write After Approval): Add Andy Wingo.
2138 2015-04-09 H.J. Lu <hongjiu.lu@intel.com>
2140 * acinclude.m4: (GDB_AC_CHECK_BFD): Set ZLIBDIR with $zlibdir.
2141 Replace $zlibdir with $ZLIBDIR in LDFLAGS.
2142 * configure: Regenerated.
2144 2015-04-09 Pedro Alves <palves@redhat.com>
2146 * gnulib/update-gnulib.sh (IMPORTED_GNULIB_MODULES): Add strtok_r.
2147 * gnulib/Makefile.in (aclocal_m4_deps): Add import/m4/strtok_r.m4.
2148 * gnulib/configure, gnulib/config.in, gnulib/aclocal.m4: Regenerate.
2149 * gnulib/import/Makefile.am: Update.
2150 * gnulib/import/Makefile.in: Update.
2151 * gnulib/import/m4/gnulib-cache.m4: Update.
2152 * gnulib/import/m4/gnulib-comp.m4: Update.
2153 * gnulib/import/m4/strtok_r.m4: New file.
2154 * gnulib/import/strtok_r.c: New file.
2156 2015-04-09 Pedro Alves <palves@redhat.com>
2158 * gnulib/update-gnulib.sh (aclocal version check): Filter out
2159 "called too early to check prototype".
2161 2015-04-08 Sergio Durigan Junior <sergiodj@redhat.com>
2164 * python/py-cmd.c (cmdpy_completer_helper): Adjust function to not
2165 use a caching mechanism. Adjust comments and code to reflect
2166 that. Replace 'sizeof' by 'strlen' when fetching 'wordobj'.
2167 (cmdpy_completer_handle_brkchars): Adjust call to
2168 cmdpy_completer_helper. Call Py_XDECREF for 'resultobj'.
2169 (cmdpy_completer): Likewise.
2171 2015-04-08 Yao Qi <yao.qi@linaro.org>
2173 * spu-tdep.c (spu_gdbarch_init): Don't call
2174 set_gdbarch_cannot_step_breakpoint.
2176 2015-04-07 Sergio Durigan Junior <sergiodj@redhat.com>
2178 * linux-tdep.c (decode_vmflags): Initialize 'saveptr'.
2180 2015-04-07 Pedro Alves <palves@redhat.com>
2182 * gdbthread.h (ALL_NON_EXITED_THREADS_SAFE): Rename to ...
2183 (ALL_THREADS_SAFE): ... this, and don't skip exited threads.
2184 (delete_exited_threads): New declaration.
2185 * infrun.c (follow_exec): Use ALL_THREADS_SAFE.
2186 * linux-nat.c (linux_nat_update_thread_list): New function.
2187 (linux_nat_add_target): Install it.
2188 * remote.c (remote_update_thread_list): Use ALL_THREADS_SAFE.
2189 * thread.c (prune_threads): Use ALL_THREADS_SAFE.
2190 (delete_exited_threads): New function.
2192 2015-04-07 Pedro Alves <pedro@codesourcery.com>
2194 * infrun.c (resume) <displaced stepping debug output>: Get the
2195 leader thread's regcache, not resume_ptid's.
2197 2015-04-06 Doug Evans <xdje42@gmail.com>
2199 * symtab.c (hash_symbol_entry): Hash STRUCT_DOMAIN symbols as
2201 (symbol_cache_lookup): Clarify use of bsc_ptr, slot_ptr parameters.
2202 Include symbol domain in debugging output.
2204 2015-04-06 Pedro Alves <palves@redhat.com>
2205 Bernd Edlinger <bernd.edlinger@hotmail.de>
2207 * configure.ac: Remove the mingw32-specific stub-termcap.o
2208 fallback, and instead fallback to the stub termcap on all hosts.
2209 * configure: Regenerate.
2210 * stub-termcap.c [!__MINGW32__] (PC, BC, UP): Define as weak
2213 2015-04-03 Pierre-Marie de Rodat <derodat@adacore.com>
2215 * gdbtypes.c (is_dynamic_type_internal): Remove the unused
2216 "top_level" parameter.
2217 (resolve_dynamic_type_internal): Remove the unused "top_level"
2218 parameter. Update call to is_dynamic_type_internal.
2219 (is_dynamic_type): Update call to is_dynamic_type_internal.
2220 (resolve_dynamic_range): Update call to
2221 resolve_dynamic_type_internal.
2222 (resolve_dynamic_union): Likewise.
2223 (resolve_dynamic_struct): Likewise.
2224 (resolve_dynamic_type): Likewise.
2226 2015-04-03 Pierre-Marie de Rodat <derodat@adacore.com>
2228 * gdbtypes.c (is_dynamic_type_internal): Remove special handling of
2229 TYPE_CODE_REF types so that they are not considered as dynamic
2230 depending on the referenced type.
2231 (resolve_dynamic_type_internal): Likewise.
2233 2015-04-02 H.J. Lu <hongjiu.lu@intel.com>
2235 * Makefile.in (top_srcdir): New.
2236 * configure: Regenerated.
2238 2015-04-02 Gary Benson <gbenson@redhat.com>
2240 * NEWS: Announce the new default sysroot of "target:".
2242 2015-04-02 Gary Benson <gbenson@redhat.com>
2244 * main.c (captured_main): Set gdb_sysroot to "target:"
2245 if not otherwise set.
2247 2015-04-02 Gary Benson <gbenson@redhat.com>
2249 * exec.c (exec_file_attach): Support "target:" filenames.
2251 2015-04-02 Gary Benson <gbenson@redhat.com>
2253 * solib.c (solib_find): Strip "target:" prefix from sysroot
2254 if accessing local files.
2256 2015-04-02 Gary Benson <gbenson@redhat.com>
2258 * symfile.c (symfile_bfd_open): Reorder to remove duplicated
2259 checks and error messages.
2261 2015-04-02 Gary Benson <gbenson@redhat.com>
2263 * remote.h (REMOTE_SYSROOT_PREFIX): Remove definition.
2264 (remote_filename_p): Remove declaration.
2265 (remote_bfd_open): Likewise.
2266 * remote.c (remote_bfd_iovec_open): Remove function.
2267 (remote_bfd_iovec_close): Likewise.
2268 (remote_bfd_iovec_pread): Likewise.
2269 (remote_bfd_iovec_stat): Likewise.
2270 (remote_filename_p): Likewise.
2271 (remote_bfd_open): Likewise.
2272 * symfile.h (gdb_bfd_open_maybe_remote): Remove declaration.
2273 * symfile.c (separate_debug_file_exists): Use gdb_bfd_open.
2274 (gdb_bfd_open_maybe_remote): Remove function.
2275 (symfile_bfd_open): Replace remote filename check with
2276 target filename check.
2277 (reread_symbols): Use gdb_bfd_open.
2278 * build-id.c (gdbcore.h): New include.
2279 (build_id_to_debug_bfd): Use gdb_bfd_open.
2280 * infcmd.c (attach_command_post_wait): Remove remote filename
2282 * solib.c (solib_find): Replace remote-specific handling with
2283 target-specific handling. Update comments where necessary.
2284 (solib_bfd_open): Replace remote-specific handling with
2285 target-specific handling.
2286 (gdb_sysroot_changed): New function.
2287 (_initialize_solib): Call the above when gdb_sysroot changes.
2288 * windows-tdep.c (gdbcore.h): New include.
2289 (windows_xfer_shared_library): Use gdb_bfd_open.
2291 2015-04-02 Gary Benson <gbenson@redhat.com>
2293 * gdb/gdb_bfd.h (TARGET_SYSROOT_PREFIX): New definition.
2294 (is_target_filename): New declaration.
2295 (gdb_bfd_has_target_filename): Likewise.
2296 (gdb_bfd_open): Update documentation comment.
2297 * gdb_bfd.c (target.h): New include.
2298 (gdb/fileio.h): Likewise.
2299 (is_target_filename): New function.
2300 (gdb_bfd_has_target_filename): Likewise.
2301 (fileio_errno_to_host): Likewise.
2302 (gdb_bfd_iovec_fileio_open): Likewise.
2303 (gdb_bfd_iovec_fileio_pread): Likewise.
2304 (gdb_bfd_iovec_fileio_close): Likewise.
2305 (gdb_bfd_iovec_fileio_fstat): Likewise.
2306 (gdb_bfd_open): Use target fileio to access paths prefixed
2307 with "target:" where necessary.
2309 2015-04-02 Gary Benson <gbenson@redhat.com>
2311 * target.h (struct target_ops) <to_filesystem_is_local>:
2313 (target_filesystem_is_local): New macro.
2314 * target-delegates.c: Regenerate.
2315 * remote.c (remote_filesystem_is_local): New function.
2316 (init_remote_ops): Initialize to_filesystem_is_local.
2318 2015-04-02 Gary Benson <gbenson@redhat.com>
2320 * target.h (struct target_ops) <to_fileio_fstat>: New field.
2321 (target_fileio_fstat): New declaration.
2322 * target.c (target_fileio_fstat): New function.
2323 * inf-child.c (inf_child_fileio_fstat): Likewise.
2324 (inf_child_target): Initialize to_fileio_fstat.
2325 * remote.c (init_remote_ops): Likewise.
2327 2015-04-01 Sasha Smundak <asmundak@google.com>
2329 * Makefile.in (SUBDIR_PYTHON_OBJS): Add py-unwind.o.
2330 (SUBDIR_PYTHON_SRCS): Add py-unwind.c.
2331 (py-unwind.o): New recipe.
2332 * NEWS: mention Python frame unwinding.
2333 * data-directory/Makefile.in (PYTHON_FILE_LIST): Add
2334 gdb/unwinder.py and gdb/command/unwinder.py
2335 * python/lib/gdb/__init__.py (packages): Add frame_unwinders
2337 (execute_unwinders): New function.
2338 * python/lib/gdb/command/unwinders.py: New file.
2339 * python/lib/gdb/unwinder.py: New file.
2340 * python/py-objfile.c (objfile_object): Add frame_unwinders field.
2341 (objfpy_dealloc): Decrement frame_unwinders reference count.
2342 (objfpy_initialize): Create frame_unwinders list.
2343 (objfpy_get_frame_unwinders): New function.
2344 (objfpy_set_frame_unwinders): Ditto.
2345 (objfile_getset): Add frame_unwinders attribute to Objfile.
2346 * python/py-progspace.c (pspace_object): Add frame_unwinders field.
2347 (pspy_dealloc): Decrement frame_unwinders reference count.
2348 (pspy_initialize): Create frame_unwinders list.
2349 (pspy_get_frame_unwinders): New function.
2350 (pspy_set_frame_unwinders): Ditto.
2351 (pspy_getset): Add frame_unwinders attribute to gdb.Progspace.
2352 * python/py-unwind.c: New file.
2353 * python/python-internal.h (pspy_get_name_unwinders): New prototype.
2354 (objpy_get_frame_unwinders): New prototype.
2355 (gdbpy_initialize_unwind): New prototype.
2356 * python/python.c (gdbpy_apply_type_printers): Call
2357 gdbpy_initialize_unwind.
2359 2015-04-01 Pedro Alves <palves@redhat.com>
2361 * infrun.c (resume): Check currently_stepping after clearing
2362 stepped_breakpoint, not before.
2364 2015-04-01 Pedro Alves <palves@redhat.com>
2366 * infrun.c (print_target_wait_results): Print all the ptid
2369 2015-04-01 Pedro Alves <palves@redhat.com>
2371 * infrun.c (keep_going): Also discard cleanups if inserting
2374 2015-04-01 Pedro Alves <palves@redhat.com>
2376 * infrun.c (wait_for_inferior): Install the
2377 finish_thread_state_cleanup cleanup across the whole function, not
2378 just around handle_inferior_event.
2380 2015-04-01 Pedro Alves <palves@redhat.com>
2382 * infrun.c (resume) <step past permanent breakpoint>: Use
2385 2015-04-01 Pedro Alves <palves@redhat.com>
2387 * linux-nat.c (linux_handle_extended_wait): Always call set_running.
2389 2015-04-01 Pierre-Marie de Rodat <derodat@adacore.com>
2391 * MAINTAINERS (Write After Approval): Add "Pierre-Marie de Rodat".
2393 2015-04-01 Pedro Alves <palves@redhat.com>
2395 * linux-thread-db.c (record_thread): Readd the thread to gdb's
2396 list if it was marked exited.
2398 2015-04-01 H.J. Lu <hongjiu.lu@intel.com>
2400 * configure: Regenerated.
2402 2015-03-31 Sergio Durigan Junior <sergiodj@redhat.com>
2403 Jan Kratochvil <jan.kratochvil@redhat.com>
2404 Oleg Nesterov <oleg@redhat.com>
2407 * linux-tdep.c: Include 'gdbcmd.h' and 'gdb_regex.h'.
2408 New enum identifying the various options of the coredump_filter
2410 (struct smaps_vmflags): New struct.
2411 (use_coredump_filter): New variable.
2412 (decode_vmflags): New function.
2413 (mapping_is_anonymous_p): Likewise.
2414 (dump_mapping_p): Likewise.
2415 (linux_find_memory_regions_full): New variables
2416 'coredumpfilter_name', 'coredumpfilterdata', 'pid', 'filterflags'.
2417 Removed variable 'modified'. Read /proc/<PID>/smaps file; improve
2418 parsing of its information. Implement memory mapping filtering
2419 based on its contents.
2420 (show_use_coredump_filter): New function.
2421 (_initialize_linux_tdep): New command 'set use-coredump-filter'.
2422 * NEWS: Mention the possibility of using the
2423 '/proc/PID/coredump_filter' file when generating a corefile.
2424 Mention new command 'set use-coredump-filter'.
2426 2015-03-31 Sergio Durigan Junior <sergiodj@redhat.com>
2428 * solib-svr4.c (solib_svr4_r_ldsomap): Catch possible exception by
2429 read_memory_unsigned_integer.
2431 2015-03-31 H.J. Lu <hongjiu.lu@intel.com>
2433 * Makefile.in (ZLIB): New.
2434 (ZLIBINC): Likewise.
2435 (INTERNAL_CFLAGS_BASE): Add $(ZLIBINC).
2436 (CLIBS): Add $(ZLIB).
2437 * acinclude.m4: (GDB_AC_CHECK_BFD): Add $zlibdir to LDFLAGS.
2439 * gdb_bfd.c: Don't check HAVE_ZLIB_H to include <zlib.h>.
2440 * top.c (print_gdb_configuration): Remove --with-zlib and
2442 * config.in: Regenerated.
2443 * configure: Likewise.
2445 2015-03-31 Antoine Tremblay <antoine.tremblay@ericsson.com>
2447 * NEWS: Mention info os cpus support.
2448 * gdb/nat/linux-osdata.c (linux_xfer_osdata_cpus): New function.
2449 (struct osdata_type): Add cpus entry, reorder the entries in
2452 2015-03-31 Matthias Klose <doko@ubuntu.com>
2454 * compile/compile.c (compile_to_object): Allow triplets with or
2457 2015-03-30 Doug Evans <dje@google.com>
2460 * cp-namespace.c (cp_search_static_and_baseclasses): Always look for
2461 klass in VAR_DOMAIN.
2463 2015-03-30 Gary Benson <gbenson@redhat.com>
2465 * remote.c (remote_mourn_1): Remove function. Update all callers
2466 to use remote_mourn.
2467 (extended_remote_mourn_1): Remove function. Update all callers
2468 to use extended_remote_mourn.
2469 (extended_remote_attach_1): Remove function. Update all callers
2470 to use extended_remote_attach.
2472 2015-03-28 James Bowman <james.bowman@ftdichip.com>
2474 * Makefile.in (ALL_TARGET_OBS): Add ft32-tdep.o.
2475 (HFILES_NO_SRCDIR): Add ft32-tdep.h.
2476 (ALLDEPFILES): Add ft32-tdep.c.
2477 * configure.tgt: Add FT32 entry.
2478 * ft32-tdep.c: New file, FT32 target-dependent code.
2479 * ft32-tdep.h: New file, FT32 target-dependent code.
2481 2015-03-27 Jan Kratochvil <jan.kratochvil@redhat.com>
2484 2015-03-26 Jan Kratochvil <jan.kratochvil@redhat.com>
2486 * printcmd.c (print_command_1): Move expr variable scope.
2488 2015-03-27 Joel Brobecker <brobecker@adacore.com>
2490 * dtrace-probe.c (dtrace_process_dof_probe): Initialize expr to NULL.
2492 2015-03-27 Andrzej Kaczmarek <andrzej.kaczmarek@tieto.com>
2494 * gdb_bfd.c (gdb_bfd_section_index): Fix off-by-one for special
2497 2015-03-26 Joel Brobecker <brobecker@adacore.com>
2499 * dtrace-probe.c (dtrace_process_dof_probe): Contain any
2500 exception raised while parsing the probe arguments.
2501 Force parsing to be done using the C language parser.
2502 * expression.h (parse_expression_with_language): Declare.
2503 * parse.c (parse_expression_with_language): New function.
2505 2015-03-26 Jon Turney <jon.turney@dronecode.org.uk>
2507 * MAINTAINERS (Write After Approval): Add "Jon Turney".
2509 2015-03-26 Andy Wingo <wingo@igalia.com>
2512 * dwarf2read.c (struct partial_die_info): Add has_const_value
2514 (add_partial_symbol): Don't punt on symbols that have const_value
2516 (read_partial_die): Detect DW_AT_const_value.
2518 2015-03-26 Jan Kratochvil <jan.kratochvil@redhat.com>
2521 * printcmd.c (print_command_1): Move expr variable scope.
2523 2015-03-26 Jan Kratochvil <jan.kratochvil@redhat.com>
2526 * printcmd.c (validate_format): Make the parameter cmdname const.
2528 2015-03-26 Don Breazeal <donb@codesourcery.com>
2530 * remote.c (_initialize_remote): Update comment.
2532 2015-03-26 Pedro Alves <palves@redhat.com>
2533 Jon TURNEY <jon.turney@dronecode.org.uk>
2535 * coffread.c (coff_symfile_read): When constructing the name of an
2536 import stub symbol from import symbol for amd64, only skip the
2537 char after _imp_ if the target is underscored (like i386) and the
2538 char is indeed the target's leading char.
2540 2015-03-25 Pedro Alves <palves@redhat.com>
2542 * target.h <to_async>: Replace 'callback' and 'context' parameters
2543 with boolean 'enable' parameter.
2544 (target_async): Replace CALLBACK and CONTEXT parameters with
2545 boolean ENABLE parameter.
2546 * inf-loop.c (inferior_event_handler): Adjust.
2547 * linux-nat.c (linux_nat_attach, linux_nat_resume)
2548 (linux_nat_resume): Adjust.
2549 (async_client_callback, async_client_context): Delete.
2550 (handle_target_event): Call inferior_event_handler directly.
2551 (linux_nat_async): Replace 'callback' and 'context' parameters
2552 with boolean 'enable' parameter. Adjust. Remove references to
2553 async_client_callback and async_client_context.
2554 (linux_nat_close): Adjust.
2555 * record-btrace.c (record_btrace_async): Replace 'callback' and
2556 'context' parameters with boolean 'enable' parameter. Adjust.
2557 (record_btrace_resume): Adjust.
2558 * record-full.c (record_full_async): Replace 'callback' and
2559 'context' parameters with boolean 'enable' parameter. Adjust.
2560 (record_full_resume, record_full_core_resume): Adjust.
2561 * remote.c (struct remote_state) <async_client_callback,
2562 async_client_context>: Delete fields.
2563 (remote_start_remote, extended_remote_attach_1, remote_resume)
2564 (extended_remote_create_inferior): Adjust.
2565 (remote_async_serial_handler): Call inferior_event_handler
2567 (remote_async): Replace 'callback' and 'context' parameters with
2568 boolean 'enable' parameter. Adjust.
2569 * top.c (gdb_readline_wrapper_cleanup, gdb_readline_wrapper):
2571 * target-delegates.c: Regenerate.
2573 2015-03-25 Gary Benson <gbenson@redhat.com>
2574 Pedro Alves <palves@redhat.com>
2576 * target.c (fileio_ft_t): New typedef, define object vector.
2577 (fileio_fhandles): New static variable.
2578 (is_closed_fileio_fh): New macro.
2579 (lowest_closed_fd): New static variable.
2580 (acquire_fileio_fd): New function.
2581 (release_fileio_fd): Likewise.
2582 (fileio_fd_to_fh): New macro.
2583 (target_fileio_open): Wrap the file descriptor on success.
2584 (target_fileio_pwrite): Updated to use wrapped file descriptor.
2585 (target_fileio_pread): Likewise.
2586 (target_fileio_close): Likewise.
2588 2015-03-24 Pedro Alves <palves@redhat.com>
2590 * thread.c (thread_apply_all_command): Take exited threads into
2593 2015-03-24 Pedro Alves <palves@redhat.com>
2595 * infrun.c (resume, proceed): Mention
2596 switch_back_to_stepped_thread, not switch_back_to_stepping.
2598 2015-03-24 Pedro Alves <palves@redhat.com>
2600 * infrun.c (user_visible_resume_ptid): Rewrite going from
2601 most-locked to unlocked instead of the opposite. Move comment ...
2602 * infrun.h (user_visible_resume_ptid): ... here.
2604 2015-03-24 Pedro Alves <palves@redhat.com>
2606 * linux-nat.c (linux_nat_resume): Output debug logs before trying
2607 to resume the event lwp. Use the lwp's ptid instead of the passed
2608 in (maybe wildcard) ptid.
2609 (stop_wait_callback): Tweak debug log output.
2610 (check_stopped_by_breakpoint): Tweak debug log output. Also dump
2612 (linux_nat_filter_event): In debug output, distinguish a
2613 resume_stop SIGSTOP from a delayed SIGSTOP. Output debug logs
2614 before trying to resume the lwp.
2616 2015-03-24 Joel Brobecker <brobecker@adacore.com>
2618 * gdbtypes.h (struct dynamic_prop_list) <prop>: Remove
2619 pointer indirection.
2620 * gdbtypes.c (get_dyn_prop): Adjust, following change above.
2621 (add_dyn_prop, copy_dynamic_prop_list): Likewise.
2623 2015-03-24 Joel Brobecker <brobecker@adacore.com>
2625 * gdbtypes.h (enum dynamic_prop_node_kind) <DYN_PROP_DATA_LOCATION>:
2626 Renames DYN_ATTR_DATA_LOCATION.
2627 (TYPE_DATA_LOCATION): Use DYN_PROP_DATA_LOCATION instead of
2628 DYN_ATTR_DATA_LOCATION.
2629 * dwarf2read.c (set_die_type): Use DYN_PROP_DATA_LOCATION
2630 instead of DYN_ATTR_DATA_LOCATION.
2632 2015-03-24 Pedro Alves <palves@redhat.com>
2634 * breakpoint.c (until_break_command): Adjust call to proceed.
2635 * gdbthread.h (struct thread_control_state) <stepping_command>:
2637 * infcall.c (run_inferior_call): Adjust call to proceed.
2638 * infcmd.c (run_command_1, proceed_thread_callback, continue_1):
2639 Adjust calls to proceed.
2640 (set_step_frame): Set the current thread's step_start_function
2642 (step_once): Adjust calls to proceed.
2643 (jump_command, signal_command, until_next_command)
2644 (finish_backward, finish_forward, proceed_after_attach_callback)
2645 (attach_command_post_wait): Adjust calls to proceed.
2646 * infrun.c (proceed_after_vfork_done): Adjust call to proceed.
2647 (do_target_resume): New function, factored out from ...
2648 (resume): ... here. Remove 'step' parameter. Instead, check
2649 currently_stepping to determine whether the thread should be
2651 (proceed): Remove 'step' parameter and don't set the thread's
2652 step_start_function here. Adjust call to 'resume'.
2653 (handle_inferior_event): Adjust calls to 'resume'.
2654 (switch_back_to_stepped_thread): Use do_target_resume instead of
2656 (keep_going): Adjust calls to 'resume'.
2657 * infrun.h (proceed): Remove 'step' parameter.
2659 * windows-nat.c (do_initial_windows_stuff): Adjust call to
2661 * mi/mi-main.c (proceed_thread): Adjust call to 'proceed'.
2663 2015-03-24 Pedro Alves <palves@redhat.com>
2665 * gdbthread.h (struct thread_control_state) <stepping_command>:
2667 * infcmd.c (step_once): Pass step=1 to clear_proceed_status. Set
2668 the thread's stepping_command field.
2669 * infrun.c (resume): Check the thread's stepping_command flag to
2670 determine which threads should be resumed. Rename 'entry_step'
2672 (clear_proceed_status_thread): Clear 'stepping_command'.
2673 (schedlock_applies): Change parameter type to struct thread_info
2675 (find_thread_needs_step_over): Remove 'step' parameter. Adjust.
2676 (switch_back_to_stepped_thread): Adjust calls to
2677 'schedlock_applies'.
2678 (_initialize_infrun): Adjust "set scheduler-locking step" help.
2680 2015-03-24 Pedro Alves <palves@redhat.com>
2682 * infrun.c (step_start_function): Delete and ...
2683 * gdbthread.h (struct thread_control_state) <step_start_function>:
2684 ... now a field here.
2685 * infrun.c (clear_proceed_status_thread): Clear the thread's
2686 step_start_function.
2687 (proceed, process_event_stop_test, print_stop_event): Adjust.
2689 2015-03-24 Pedro Alves <palves@redhat.com>
2691 * infrun.c (proceed): No longer handle negative step.
2693 2015-03-24 Gary Benson <gbenson@redhat.com>
2695 * nat/x86-linux.h (x86_linux_new_thread): New declaration.
2696 (x86_linux_prepare_to_resume): Likewise.
2697 * x86-linux-nat.c (x86_linux_new_thread):
2698 Moved to nat/x86-linux.c.
2699 (x86_linux_prepare_to_resume): Likewise.
2700 * nat/x86-linux.c (x86_linux_new_thread): New function.
2701 (x86_linux_prepare_to_resume): Likewise.
2703 2015-03-24 Gary Benson <gbenson@redhat.com>
2705 * nat/x86-linux-dregs.h: New file.
2706 * nat/x86-linux-dregs.c: Likewise.
2707 * Makefile.in (HFILES_NO_SRCDIR): Add nat/x86-linux-dregs.h.
2708 (x86-linux-dregs.o): New rule.
2709 * config/i386/linux.mh (NATDEPFILES): Add x86-linux-dregs.o.
2710 * config/i386/linux64.mh (NATDEPFILES): Likewise.
2711 * x86-linux-nat.c: Include nat/x86-linux-dregs.h.
2712 (u_debugreg_offset): Moved to nat/x86-linux-dregs.c.
2713 (x86_linux_dr_get): Likewise.
2714 (x86_linux_dr_set): Likewise.
2715 (x86_linux_dr_get_addr): Likewise.
2716 (x86_linux_dr_get_control): Likewise.
2717 (x86_linux_dr_get_status): Likewise.
2718 (update_debug_registers_callback): Likewise.
2719 (x86_linux_dr_set_control): Likewise.
2720 (x86_linux_dr_set_addr): Likewise.
2721 (x86_linux_update_debug_registers): Likewise.
2723 2015-03-24 Gary Benson <gbenson@redhat.com>
2725 * x86-linux-nat.c (x86_linux_update_debug_registers):
2726 New function, factored out from...
2727 (x86_linux_prepare_to_resume): ...this.
2729 2015-03-24 Gary Benson <gbenson@redhat.com>
2731 * x86-linux-nat.c (x86_linux_dr_get): Update comments.
2732 (x86_linux_dr_set): Likewise.
2733 (x86_linux_dr_get_addr): Likewise.
2734 (x86_linux_dr_get_control): Likewise.
2735 (x86_linux_dr_get_status): Likewise.
2736 (update_debug_registers_callback): Likewise.
2737 (x86_linux_dr_set_control): Likewise.
2738 (x86_linux_dr_set_addr): Likewise.
2739 (x86_linux_prepare_to_resume): Likewise.
2740 (x86_linux_new_thread): Likewise.
2742 2015-03-24 Gary Benson <gbenson@redhat.com>
2744 * x86-linux-nat.c (x86_linux_dr_set_addr): Update assertion.
2745 (x86_linux_new_thread): Rename argument.
2747 2015-03-24 Gary Benson <gbenson@redhat.com>
2749 * nat/x86-linux.h: New file.
2750 * nat/x86-linux.c: Likewise.
2751 * Makefile.in (HFILES_NO_SRCDIR): Add nat/x86-linux.h.
2752 (x86-linux.o): New rule.
2753 * config/i386/linux.mh (NATDEPFILES): Add x86-linux.o.
2754 * config/i386/linux64.mh (NATDEPFILES): Likewise.
2755 * nat/linux-nat.h (struct arch_lwp_info): New forward declaration.
2756 (lwp_set_arch_private_info): New declaration.
2757 (lwp_arch_private_info): Likewise.
2758 * linux-nat.c (lwp_set_arch_private_info): New function.
2759 (lwp_arch_private_info): Likewise.
2760 * x86-linux-nat.c: Include nat/x86-linux.h.
2761 (arch_lwp_info): Removed structure.
2762 (update_debug_registers_callback):
2763 Use lwp_set_debug_registers_changed.
2764 (x86_linux_prepare_to_resume): Use lwp_debug_registers_changed
2765 and lwp_set_debug_registers_changed.
2766 (x86_linux_new_thread): Use lwp_set_debug_registers_changed.
2768 2015-03-24 Gary Benson <gbenson@redhat.com>
2770 * nat/linux-nat.h (ptid_of_lwp): New declaration.
2771 (lwp_is_stopped): Likewise.
2772 (lwp_stop_reason): Likewise.
2773 * linux-nat.c (ptid_of_lwp): New function.
2774 (lwp_is_stopped): Likewise.
2775 (lwp_is_stopped_by_watchpoint): Likewise.
2776 * x86-linux-nat.c (update_debug_registers_callback):
2778 (x86_linux_prepare_to_resume): Use ptid_of_lwp and
2781 2015-03-24 Gary Benson <gbenson@redhat.com>
2783 * linux-nat.h (linux_stop_lwp): Move declaration to...
2784 * nat/linux-nat.h (linux_stop_lwp): New declaration.
2786 2015-03-24 Gary Benson <gbenson@redhat.com>
2788 * linux-nat.h: Include nat/linux-nat.h.
2789 (iterate_over_lwps): Move declaration to nat/linux-nat.h.
2790 * nat/linux-nat.h (struct lwp_info): New forward declaration.
2791 (iterate_over_lwps_ftype): New typedef.
2792 (iterate_over_lwps): New declaration.
2793 * linux-nat.h (iterate_over_lwps): Update comment. Use
2794 iterate_over_lwps_ftype. Update callback return value check.
2796 2015-03-24 Gary Benson <gbenson@redhat.com>
2798 * x86-nat.h (x86_debug_reg_state): Move declaration to...
2799 * nat/x86-dregs.h (x86_debug_reg_state): New declaration.
2801 2015-03-24 Gary Benson <gbenson@redhat.com>
2803 * nat/linux-nat.h (current_lwp_ptid): New declaration.
2804 * linux-nat.c (current_lwp_ptid): New function.
2805 * x86-linux-nat.c: Include nat/linux-nat.h.
2806 (x86_linux_dr_get_addr): Use current_lwp_ptid.
2807 (x86_linux_dr_get_control): Likewise.
2808 (x86_linux_dr_get_status): Likewise.
2809 (x86_linux_dr_set_control): Likewise.
2810 (x86_linux_dr_set_addr): Likewise.
2812 2015-03-24 Antoine Tremblay <antoine.tremblay@ericsson.com>
2814 PR breakpoints/16466
2815 * breakpoint.c (create_breakpoint): Set thread on breakpoint struct.
2817 2015-03-23 Joel Brobecker <brobecker@adacore.com>
2819 * ser-mingw.c (ser_windows_setparity): Fix indentation.
2820 * ser-unix.c (hardwire_setparity): Likewise.
2822 2015-03-23 Yurij Grechishhev <yurij.grechishhev@gmail.com>
2824 * NEWS: Mention set/show serial parity command.
2825 * monitor.c (monitor_open): Call serial_setparity.
2826 * remote.c (remote_open_1): Likewise.
2827 * ser-base.c (ser_base_serparity): New function.
2828 * ser-base.h (ser_base_setparity): Add declaration.
2829 * ser-go32.c (dos_ops): Set "setparity" field.
2830 * ser-mingw.c (ser_windows_raw): Do not set state.fParity and
2832 (ser_windows_setparity): New function.
2833 (hardwire_ops): Add ser_windows_setparity.
2834 (tty_ops): Add NULL for setparity field.
2835 (pipe_ops): Add ser_base_setparity.
2836 (tcp_ops): Likewise.
2837 * ser-pipe.c (pipe_ops): Likewise.
2838 * ser-tcp.c (tcp_ops): Likewise.
2839 * ser-unix.c (hardwire_setparity): Add declaration.
2840 (hardwire_raw): Don't reset PARENB flag.
2841 (hardwire_setparity): New function.
2842 (hardwire_ops): Add hardwire_setparity.
2843 * serial.c (serial_setparity): New function.
2844 (serial_parity): New global.
2845 (parity_none, parity_odd, parity_even, parity_enums, parity):
2847 (set_parity): New function.
2848 (_initialize_serial): Add set/show serial parity commands.
2849 * serial.h (GDBPARITY_NONE): Define.
2850 (GDBPARITY_ODD): Define.
2851 (GDBPARITY_EVEN): Define.
2852 (serial_setparity) Add declaration.
2853 (struct serial_ops): Add setparity field.
2854 * target.h (serial_parity): Add declaration.
2856 2015-03-23 Keith Seitz <keiths@redhat.com>
2858 * linespec.c (linespec_lexer_lex_keyword): Update comment.
2860 2015-03-23 Keith Seitz <keiths@redhat.com>
2862 * breakpoint.c (parse_breakpoint_sals): Use
2863 linespec_lexer_lex_keyword to ascertain if the user specified
2865 * linespec.c [IF_KEYWORD_INDEX]: Define.
2866 (linespec_lexer_lex_keyword): Export.
2867 (struct ls_parser) <keyword_ok>: Remove.
2868 A keyword is only a keyword if not followed by another keyword.
2869 (linespec_lexer_lex_one): Remove keyword_ok handling.
2870 Add comment explaining why the parsing stream is not advanced
2871 when a keyword is seen.
2872 (parse_linespec): Remove parser->keyword_ok.
2873 * linespec.h (linespec_lexer_lex_keyword): Add declaration.
2875 2015-03-23 Keith Seitz <keiths@redhat.com>
2878 * dwarf2read.c (dwarf2_add_member_fn): Issue a complaint
2879 if we find a static method with DW_AT_vtable_elem_location.
2881 2015-03-21 Eli Zaretskii <eliz@gnu.org>
2883 * tui/tui-io.c (tui_expand_tabs): Reinitialize the column counter
2884 before the second loop, to avoid undefined behavior. Reported by
2885 Anton Blanchard <anton@samba.org>.
2887 2015-03-20 Keven Boell <keven.boell@intel.com>
2889 * gdbtypes.c (resolve_dynamic_type_internal): Adapt
2890 data_location usage to linked list.
2891 (resolve_dynamic_type_internal): Adapt data_location to
2893 (get_dyn_prop, add_dyn_prop, copy_dynamic_prop_list): New function.
2894 (copy_type_recursive, copy_type): Add copy of linked list.
2895 * gdbtypes.h (enum dynamic_prop_node_kind): New enum.
2896 (struct dynamic_prop_list): New struct.
2897 * dwarf2read.c (set_die_type): Set data_location data.
2899 2015-03-20 Pedro Alves <palves@redhat.com>
2901 * i386-sol2-tdep.c (i386_sol2_static_transform_name): Move "p" to
2902 inner block and make it const.
2903 * machoread.c (get_archive_prefix_len): Make "lparen" const.
2905 2015-03-20 Pedro Alves <palves@redhat.com>
2907 * breakpoint.c (set_breakpoint_condition): Make argument "exp" const.
2908 * breakpoint.h (set_breakpoint_condition): Update declaration.
2910 2015-03-20 Pedro Alves <palves@redhat.com>
2912 * tui/tui-io.c (tui_expand_tabs): Make "s1" const.
2914 2015-03-20 Pedro Alves <palves@redhat.com>
2916 * xcoffread.c (scan_xcoff_symtab): Make "p" and "q" const.
2918 2015-03-20 Pedro Alves <palves@redhat.com>
2920 * remote-m32r-sdi.c (m32r_open): Make "port_str" const.
2922 2015-03-20 Pedro Alves <palves@redhat.com>
2924 * nto-tdep.c (nto_find_and_open_solib): Make "endian" const.
2925 (nto_init_solib_absolute_prefix): Likewise.
2927 2015-03-20 Pedro Alves <palves@redhat.com>
2929 * sparc-sol2-tdep.c (sparc_sol2_static_transform_name): Make "p" const.
2930 * spu-tdep.c (spu_gdbarch_init): Make "name" const.
2932 2015-03-20 Jan Kratochvil <jan.kratochvil@redhat.com>
2934 * config/djgpp/README: Remove gdb.hp.
2936 2015-03-20 Yao Qi <yao.qi@linaro.org>
2938 * aarch64-tdep.c (aarch64_gdbarch_init): Don't call
2939 set_gdbarch_cannot_step_breakpoint.
2941 2015-03-19 Pedro Alves <palves@redhat.com>
2943 * linux-nat.c (linux_resume_one_lwp): Rename to ...
2944 (linux_resume_one_lwp_throw): ... this. Don't handle ESRCH here,
2945 instead call perror_with_name.
2946 (check_ptrace_stopped_lwp_gone): New function.
2947 (linux_resume_one_lwp): Reimplement as wrapper around
2948 linux_resume_one_lwp_throw that swallows errors if the LWP is
2950 (resume_stopped_resumed_lwps): Try register reads in TRY/CATCH and
2951 swallows errors if the LWP is gone. Use
2952 linux_resume_one_lwp_throw instead of linux_resume_one_lwp.
2954 2015-03-19 Pedro Alves <palves@redhat.com>
2956 * linux-nat.c (status_callback): Return early if the LWP has no
2959 2015-03-19 Pedro Alves <palves@redhat.com>
2961 * linux-nat.c (select_event_lwp_callback): Update comment to no
2962 longer mention SIGTRAP.
2964 2015-03-18 Tristan Gingold <gingold@adacore.com>
2966 * amd64-windows-tdep.c (amd64_windows_find_unwind_info): Move
2967 redirection code to ...
2968 (amd64_windows_frame_decode_insns): ... Here. Fix in prologue
2969 checks. Fix SAVE_NONVOL operations. Add debug code and comments.
2971 2015-03-18 Gary Benson <gbenson@redhat.com>
2973 (remote_protocol_features): Remove the "vFile:fstat" feature.
2974 (remote_hostio_fstat): Probe for "vFile:fstat" support.
2976 2015-03-11 Yao Qi <yao.qi@linaro.org>
2979 * aarch64-linux-tdep.c: Include xml-syscall.h
2980 (aarch64_linux_get_syscall_number): New function.
2981 (aarch64_linux_init_abi): Call
2982 set_gdbarch_get_syscall_number.
2983 * syscalls/aarch64-linux.xml: New file.
2985 2015-03-17 Yurij Grechishhev <yurij.grechishhev@gmail.com>
2987 * ser-base.h (ser_base_setstopbits): Change second argument name
2988 from "rate" to "num".
2990 2015-03-17 Gary Benson <gbenson@redhat.com>
2991 Luke Allardyce <lukeallardyce@gmail.com>
2994 * common/common-remote-fileio.h (sys/stat.h): New include.
2995 (stuct stat): Remove forward declaration.
2997 2015-03-16 John Baldwin <jhb@FreeBSD.org>
2999 * fbsd-tdep.c (fbsd_make_corefile_notes): Fetch all target registers
3000 before writing core register notes.
3002 2015-03-16 Yuanhui Zhang <asmwarrior@gmail.com>
3003 Pedro Alves <palves@redhat.com>
3005 * gdb_curses.h (tgetnum): Mark with EXTERN_C.
3006 * stub-termcap.c (tgetent, tgetnum, tgetflag, tgetstr, tputs)
3007 (tgoto): Wrap with extern "C".
3009 2015-03-16 Pedro Alves <palves@redhat.com>
3010 Yuanhui Zhang <asmwarrior@gmail.com>
3012 * stub-termcap.c (tputs): Change prototype.
3014 2015-03-16 Yuanhui Zhang <asmwarrior@gmail.com>
3015 Pedro Alves <palves@redhat.com>
3017 * windows-nat.c (struct thread_info_struct): Rename to ...
3018 (struct windows_thread_info_struct): ... this.
3019 (thread_info): Rename to ...
3020 (windows_thread_info): ... this.
3023 2015-03-14 Jan Kratochvil <jan.kratochvil@redhat.com>
3024 Pedro Alves <palves@redhat.com>
3026 * NEWS: New Removed targets and native configurations.
3028 2015-03-13 Jan Kratochvil <jan.kratochvil@redhat.com>
3031 * Makefile.in (ALL_64_TARGET_OBS): Remove ia64-hpux-tdep.o.
3032 (ALL_TARGET_OBS): Remove hppa-hpux-tdep.o, solib-som.o and solib-pa64.o.
3033 (HFILES_NO_SRCDIR): Remove solib-som.h, inf-ttrace.h, solib-pa64.h and
3034 ia64-hpux-tdep.h, solib-ia64-hpux.h.
3035 (ALLDEPFILES): Remove hppa-hpux-tdep.c, hppa-hpux-nat.c,
3036 ia64-hpux-nat.c, ia64-hpux-tdep.c, somread.c and solib-som.c.
3037 * config/djgpp/fnchange.lst: Remove hppa-hpux-nat.c and
3039 * config/ia64/hpux.mh: Remove file.
3040 * config/pa/hpux.mh: Remove file.
3041 * configure: Rebuilt.
3042 * configure.ac (dlgetmodinfo, somread.o): Remove.
3043 * configure.host (hppa*-*-hpux*, ia64-*-hpux*): Make them obsolete.
3044 (ia64-*-hpux*): Remove its float format exception.
3045 * configure.tgt (hppa*-*-hpux*, ia64-*-hpux*): Make them obsolete.
3046 * hppa-hpux-nat.c: Remove file.
3047 * hppa-hpux-tdep.c: Remove file.
3048 * hppa-tdep.c (struct hppa_unwind_info, struct hppa_objfile_private):
3049 Move them here from hppa-tdep.h
3050 (hppa_objfile_priv_data, hppa_init_objfile_priv_data): Make it static.
3051 (hppa_frame_prev_register_helper): Remove HPPA_FLAGS_REGNUM exception.
3052 * hppa-tdep.h (struct hppa_unwind_info, struct hppa_objfile_private):
3053 Move them to hppa-tdep.c.
3054 (hppa_objfile_priv_data, hppa_init_objfile_priv_data): Remove
3056 * ia64-hpux-nat.c: Remove file.
3057 * ia64-hpux-tdep.c: Remove file.
3058 * ia64-hpux-tdep.h: Remove file.
3059 * inf-ttrace.c: Remove file.
3060 * inf-ttrace.h: Remove file.
3061 * solib-ia64-hpux.c: Remove file.
3062 * solib-ia64-hpux.h: Remove file.
3063 * solib-pa64.c: Remove file.
3064 * solib-pa64.h: Remove file.
3065 * solib-som.c: Remove file.
3066 * solib-som.h: Remove file.
3067 * somread.c: Remove file.
3069 2015-03-13 John Baldwin <jhb@FreeBSD.org>
3071 * configure.ac: AC_SEARCH_LIBS(kinfo_getvmmap, util).
3072 * config.in: Regenerate.
3073 * configure: Regenerate.
3074 * fbsd-nat.c [!HAVE_KINFO_GETVMMAP] (fbsd_read_mapping): Don't
3076 (fbsd_find_memory_regions): Use kinfo_getvmmap to
3077 enumerate memory regions if present.
3079 2015-03-13 John Baldwin <jhb@FreeBSD.org>
3081 * amd64fbsd-tdep.c (amd64fbsd_sigtramp_p): Style fixes.
3082 * i386fbsd-tdep.c: Fix style in various gdb_static_assert
3084 (i386fbsd_sigtramp_p): Likewise.
3086 2015-03-12 John Baldwin <jhb@FreeBSD.org>
3088 * MAINTAINERS (Write After Approval): Add John Baldwin.
3090 2015-03-12 Gary Benson <gbenson@redhat.com>
3092 * solib.c (_initialize_solib): Make "set/show sysroot" use
3093 add_setshow_optional_filename_cmd so it can be restored to
3094 empty after being set.
3096 2015-03-11 Sergio Durigan Junior <sergiodj@redhat.com>
3098 * Makefile.in (SFILES): New source break-catch-syscall.c.
3099 (COMMON_OBS): New object break-catch-syscall.o.
3100 * break-catch-syscall.c: New file.
3101 * breakpoint.c: Remove inclusion of "xml-syscall.h".
3102 (syscall_catchpoint_p): Move declaration to break-catch-syscall.c
3103 (struct syscall_catchpoint): Likewise.
3104 (dtor_catch_syscall): Likewise.
3105 (catch_syscall_inferior_data): Likewise.
3106 (struct catch_syscall_inferior_data): Likewise.
3107 (get_catch_syscall_inferior_data): Likewise.
3108 (catch_syscall_inferior_data_cleanup): Likewise.
3109 (insert_catch_syscall): Likewise.
3110 (remove_catch_syscall): Likewise.
3111 (breakpoint_hit_catch_syscall): Likewise.
3112 (print_it_catch_syscall): Likewise.
3113 (print_one_catch_syscall): Likewise.
3114 (print_mention_catch_syscall): Likewise.
3115 (print_recreate_catch_syscall): Likewise.
3116 (catch_syscall_breakpoint_ops): Likewise.
3117 (syscall_catchpoint_p): Likewise.
3118 (create_syscall_event_catchpoint): Likewise.
3119 (catch_syscall_split_args): Likewise.
3120 (catch_syscall_command_1): Likewise.
3121 (is_syscall_catchpoint_enabled): Likewise.
3122 (catch_syscall_enabled): Likewise.
3123 (catching_syscall_number): Likewise.
3124 (catch_syscall_completer): Likewise.
3125 (clear_syscall_counts): Likewise.
3126 (initialize_breakpoint_ops): Move initialization of syscall
3127 catchpoints to break-catch-syscall.c.
3128 (_initialize_breakpoint): Move code related to syscall catchpoints
3129 to break-catch-syscall.c.
3131 2015-03-11 Sergio Durigan Junior <sergiodj@redhat.com>
3133 * breakpoint.c (breakpoint_find_if): New function.
3134 * breakpoint.h (breakpoint_find_if): New prototype.
3136 2015-03-11 Gary Benson <gbenson@redhat.com>
3138 * remote-fileio.h (remote_fileio_to_host_stat): New declaration.
3139 * remote-fileio.c (remote_fileio_to_host_uint): New function.
3140 (remote_fileio_to_host_ulong): Likewise.
3141 (remote_fileio_to_host_mode): Likewise.
3142 (remote_fileio_to_host_time): Likewise.
3143 (remote_fileio_to_host_stat): Likewise.
3144 * remote.c (PACKET_vFile_fstat): New enum value.
3145 (remote_protocol_features): Register the "vFile:fstat" feature.
3146 (remote_hostio_fstat): New function.
3147 (remote_bfd_iovec_stat): Use the above.
3148 (_initialize_remote): Register new "set/show remote
3149 hostio-fstat-packet" command.
3150 * symfile.c (separate_debug_file_exists): Update comment.
3151 * NEWS: Announce new vFile:fstat packet.
3153 2015-03-11 Gary Benson <gbenson@redhat.com>
3155 * common/common-remote-fileio.h: New file.
3156 * common/common-remote-fileio.c: Likewise.
3157 * Makefile.in (SFILES): Add common/common-remote-fileio.c.
3158 (HFILES_NO_SRCDIR): Add common/common-remote-fileio.h.
3159 (COMMON_OBS): Add common-remote-fileio.o.
3160 (common-remote-fileio.o): New rule.
3161 * remote-fileio.h (common-remote-fileio.h): New include.
3162 * remote-fileio.c (gdb/fileio.h): Do not include.
3163 (remote_fileio_to_be): Moved to common-remote-fileio.h.
3164 (remote_fileio_to_fio_uint): Likewise.
3165 (remote_fileio_to_fio_time): Likewise.
3166 (remote_fileio_mode_to_target): Moved to common-remote-fileio.c.
3167 (remote_fileio_to_fio_mode): Likewise.
3168 (remote_fileio_to_fio_ulong): Likewise.
3169 (remote_fileio_to_fio_stat): Likewise.
3171 2015-03-11 Andy Wingo <wingo@igalia.com>
3173 * guile/scm-value.c (gdbscm_value_dynamic_type): Fix typo in which
3174 we were checking the cached type, not the cached dynamic type.
3176 2015-03-11 Andy Wingo <wingo@igalia.com>
3178 * guile/scm-cmd.c (cmdscm_destroyer): Don't xfree the name and
3179 other strings, as these are on the GC'd heap, and will be
3180 collected along with the smob.
3182 2015-03-11 Andy Wingo <wingo@igalia.com>
3184 * guile/scm-objfile.c (gdbscm_objfile_progspace): New function.
3185 (objfile_functions): Bind gdbscm_objfile_progspace to
3187 * guile/lib/gdb.scm: Add objfile-progspace to exports.
3189 2015-03-11 Andy Wingo <wingo@igalia.com>
3191 * guile/guile.c (_initialize_guile): Disable automatic
3192 finalization, if Guile offers us that possibility.
3193 * guile/guile.c (call_initialize_gdb_module):
3194 * guile/scm-safe-call.c (gdbscm_with_catch): Arrange to run
3195 finalizers in appropriate places.
3196 * configure.ac (AC_TRY_LIBGUILE): Add a check for
3197 scm_set_automatic_finalization_enabled.
3198 * configure: Regenerated.
3200 2015-03-11 Andreas Arnez <arnez@linux.vnet.ibm.com>
3202 * s390-linux-tdep.c (s390_skip_prologue): Skip the prologue using
3205 2015-03-11 Andreas Arnez <arnez@linux.vnet.ibm.com>
3207 * s390-linux-nat.c (struct arch_lwp_info): New.
3208 (s390_fix_watch_points): Rename to...
3209 (s390_prepare_to_resume): ...this. Skip the PER info update
3210 unless the watch points have changed.
3211 (s390_refresh_per_info, s390_new_thread): New functions.
3212 (s390_insert_watchpoint): Call s390_refresh_per_info instead of
3213 s390_fix_watch_points.
3214 (s390_remove_watchpoint): Likewise.
3215 (_initialize_s390_nat): Reflect renaming of s390_fix_watch_points.
3216 Register s390_prepare_to_resume.
3218 2015-03-09 Pedro Alves <palves@redhat.com>
3221 2015-03-07 Pedro Alves <palves@redhat.com>
3222 * common/gdb_socket.h: New file.
3223 * ser-tcp.c: Include gdb_socket.h. Don't include netinet/in.h nor
3225 (net_open): Use union gdb_sockaddr_u.
3227 2015-03-07 Pedro Alves <palves@redhat.com>
3229 * configure.ac (build_warnings): Move -Wmissing-prototypes
3230 -Wdeclaration-after-statement -Wmissing-parameter-type
3231 -Wold-style-declaration -Wold-style-definition to the C-specific
3233 * configure: Regenerate.
3235 2015-03-07 Pedro Alves <palves@redhat.com>
3237 * common/gdb_socket.h: New file.
3238 * ser-tcp.c: Include gdb_socket.h. Don't include netinet/in.h nor
3240 (net_open): Use union gdb_sockaddr_u.
3242 2015-03-07 Pedro Alves <palves@redhat.com>
3244 * common/common-exceptions.c [!__cplusplus] (enum catcher_state)
3245 (exceptions_state_mc_action_iter)
3246 (exceptions_state_mc_action_iter_1, exceptions_state_mc_catch):
3248 [__cplusplus] (try_scope_depth): New global.
3249 [__cplusplus] (exception_try_scope_entry)
3250 (exception_try_scope_exit, gdb_exception_sliced_copy)
3251 (exception_rethrow): New functions.
3252 (throw_exception): In C++ mode, throw
3253 gdb_exception_RETURN_MASK_QUIT for RETURN_QUIT and
3254 gdb_exception_RETURN_MASK_ERROR for RETURN_ERROR.
3255 (throw_it): In C++ mode, use try_scope_depth.
3256 * common/common-exceptions.h [!__cplusplus]
3257 (exceptions_state_mc_action_iter)
3258 (exceptions_state_mc_action_iter_1, exceptions_state_mc_catch):
3260 [__cplusplus] (exception_try_scope_entry)
3261 (exception_try_scope_exit, exception_rethrow): Declare.
3262 [__cplusplus] (struct exception_try_scope): New struct.
3263 [__cplusplus] (TRY, CATCH, END_CATCH): Reimplement on top of real
3265 (struct gdb_exception_RETURN_MASK_ALL)
3266 (struct gdb_exception_RETURN_MASK_ERROR)
3267 (struct gdb_exception_RETURN_MASK_QUIT): New types.
3269 2015-03-07 Pedro Alves <palves@redhat.com>
3271 * main.c (handle_command_errors): Remove volatile qualifier from
3274 2015-03-07 Pedro Alves <palves@redhat.com>
3276 * breakpoint.c (save_breakpoints): Adjust to avoid code between
3278 * gdbtypes.c (safe_parse_type): Remove empty line.
3279 (types_deeply_equal):
3280 * guile/scm-frame.c (gdbscm_frame_name):
3281 * linux-thread-db.c (find_new_threads_once):
3282 * python/py-breakpoint.c (bppy_get_commands):
3283 * record-btrace.c (record_btrace_insert_breakpoint)
3284 (record_btrace_remove_breakpoint, record_btrace_start_replaying)
3285 (record_btrace_start_replaying): Adjust to avoid code between TRY
3288 2015-03-07 Pedro Alves <palves@redhat.com>
3290 * common/common-exceptions.c (struct catcher) <exception>: No
3291 longer a pointer to volatile exception. Now an exception value.
3292 <mask>: Delete field.
3293 (exceptions_state_mc_init): Remove all parameters. Adjust.
3294 (exceptions_state_mc): No longer pop the catcher here.
3295 (exceptions_state_mc_catch): New function.
3296 (throw_exception): Adjust.
3297 * common/common-exceptions.h (exceptions_state_mc_init): Remove
3299 (exceptions_state_mc_catch): Declare.
3300 (TRY_CATCH): Rename to ...
3301 (TRY): ... this. Remove EXCEPTION and MASK parameters.
3302 (CATCH, END_CATCH): New.
3303 All callers adjusted.
3305 2015-03-07 Tom Tromey <tromey@redhat.com>
3307 * top.c (quit_force): Inline and delete DO_TRY, DO_PRINT_EX.
3309 2015-03-07 Pedro Alves <palves@redhat.com>
3311 * amd64-tdep.c (amd64_frame_cache, amd64_sigtramp_frame_cache)
3312 (amd64_epilogue_frame_cache): Normal exception handling code.
3313 * break-catch-throw.c (check_status_exception_catchpoint)
3314 (re_set_exception_catchpoint): Ditto.
3315 * cli/cli-interp.c (safe_execute_command):
3316 * cli/cli-script.c (script_from_file): Ditto.
3317 * compile/compile-c-symbols.c (generate_c_for_for_one_variable):
3319 * compile/compile-object-run.c (compile_object_run): Ditto.
3320 * cp-abi.c (baseclass_offset): Ditto.
3321 * cp-valprint.c (cp_print_value): Ditto.
3322 * exceptions.c (catch_exceptions_with_msg):
3323 * frame-unwind.c (frame_unwind_try_unwinder): Ditto.
3324 * frame.c (get_frame_address_in_block_if_available): Ditto.
3325 * i386-tdep.c (i386_frame_cache, i386_epilogue_frame_cache)
3326 (i386_sigtramp_frame_cache): Ditto.
3327 * infcmd.c (post_create_inferior): Ditto.
3328 * linespec.c (parse_linespec, find_linespec_symbols):
3329 * p-valprint.c (pascal_object_print_value): Ditto.
3330 * parse.c (parse_expression_for_completion): Ditto.
3331 * python/py-finishbreakpoint.c (bpfinishpy_init): Ditto.
3332 * remote.c (remote_get_noisy_reply): Ditto.
3333 * s390-linux-tdep.c (s390_frame_unwind_cache): Ditto.
3334 * solib-svr4.c (solib_svr4_r_map): Ditto.
3336 2015-03-06 Gary Benson <gbenson@redhat.com>
3338 * common/common-utils.h (startswith): New inline function.
3339 All places where this logic was used updated to use the above.
3341 2015-03-05 Pedro Alves <palves@redhat.com>
3344 * mem-break.c (default_memory_insert_breakpoint): Set shadow_len
3345 after reading the breakpoint's shadow memory.
3347 2015-03-05 Mark Kettenis <kettenis@gnu.org>
3349 * hppabsd-nat.c: Remove file.
3350 * hppaobsd-nat.c: New file.
3351 * Makefile.in (ALLDEPFILES): Remove hppabsd-nat.c. Add
3353 * config/pa/obsd.mh (NATDEPFILES): Replace hppabsd-nat.o with
3356 2015-03-04 Pedro Alves <palves@redhat.com>
3358 * target.h (struct target_ops) <to_decr_pc_after_break>: Delete.
3359 (target_decr_pc_after_break): Delete declaration.
3360 * target.c (default_target_decr_pc_after_break)
3361 (target_decr_pc_after_break): Delete.
3362 * linux-nat.c (check_stopped_by_breakpoint, linux_nat_wait_1): Use
3363 gdbarch_decr_pc_after_break instead of target_decr_pc_after_break.
3364 * linux-thread-db.c (check_event): Likewise.
3365 * infrun.c (adjust_pc_after_break): Likewise.
3366 * darwin-nat.c (cancel_breakpoint): Likewise.
3367 * aix-thread.c (aix_thread_wait): Likewise.
3368 * target-delegates.c: Regenerate.
3370 2015-03-04 Pedro Alves <palves@redhat.com>
3372 * linux-nat.c (save_sigtrap): Check for breakpoints before
3373 checking watchpoints.
3374 (status_callback) [USE_SIGTRAP_SIGINFO]: Don't check whether a
3375 breakpoint is inserted if relying on SIGTRAP's siginfo.si_code.
3376 (check_stopped_by_breakpoint) [USE_SIGTRAP_SIGINFO]: Decide whether
3377 a breakpoint triggered based on the SIGTRAP's siginfo.si_code.
3378 (linux_nat_stopped_by_sw_breakpoint)
3379 (linux_nat_supports_stopped_by_sw_breakpoint)
3380 (linux_nat_stopped_by_hw_breakpoint)
3381 (linux_nat_supports_stopped_by_hw_breakpoint): New functions.
3382 (linux_nat_wait_1): Don't re-increment the PC if relying on
3383 SIGTRAP's siginfo->si_code.
3384 (linux_nat_add_target): Install new target methods.
3385 * linux-thread-db.c (check_event): Don't account for breakpoint PC
3386 offset if the target already adjusted the PC.
3387 * nat/linux-ptrace.h (USE_SIGTRAP_SIGINFO): New.
3388 (GDB_ARCH_TRAP_BRKPT): New.
3389 (TRAP_HWBKPT): Define if not already defined.
3391 2015-03-04 Pedro Alves <palves@redhat.com>
3393 * NEWS: Mention the new "swbreak" and "hwbreak" stop reasons.
3394 * remote.c (struct remote_state) <remote_stopped_by_watchpoint_p>:
3396 <stop_reason>: New field.
3397 (PACKET_swbreak_feature, PACKET_hwbreak_feature): New enum values.
3398 (packet_set_cmd_state): New function.
3399 (remote_protocol_features): Register the "swbreak" and "hwbreak"
3401 (remote_query_supported): If not disabled with the corresponding
3402 "set remote foo-packet" command, report support for the swbreak
3403 and hwbreak features.
3404 (struct stop_reply) <remote_stopped_by_watchpoint_p>: Delete
3406 <stop_reason>: New field.
3407 (remote_parse_stop_reply): Handle "swbreak" and "hwbreak".
3408 (remote_wait_as): Adjust.
3409 (remote_stopped_by_sw_breakpoint)
3410 (remote_supports_stopped_by_sw_breakpoint)
3411 (remote_stopped_by_hw_breakpoint)
3412 (remote_supports_stopped_by_hw_breakpoint): New functions.
3413 (remote_stopped_by_watchpoint): New function.
3414 (init_remote_ops): Install them.
3415 (_initialize_remote): Register new "set/show remote
3416 swbreak-feature-packet" and "set/show remote
3417 swbreak-feature-packet" commands.
3419 2015-03-04 Pedro Alves <palves@redhat.com>
3421 * btrace.h: Include target/waitstatus.h.
3422 (struct btrace_thread_info) <stop_reason>: New field.
3423 * record-btrace.c (record_btrace_step_thread): Use
3424 record_check_stopped_by_breakpoint instead of breakpoint_here_p.
3425 (record_btrace_decr_pc_after_break): Delete.
3426 (record_btrace_stopped_by_sw_breakpoint)
3427 (record_btrace_supports_stopped_by_sw_breakpoint)
3428 (record_btrace_stopped_by_hw_breakpoint)
3429 (record_btrace_supports_stopped_by_hw_breakpoint): New functions.
3430 (init_record_btrace_ops): Install them.
3431 * record-full.c (record_full_hw_watchpoint): Delete and replace
3433 (record_full_stop_reason): ... this throughout.
3434 (record_full_exec_insn): Adjust.
3435 (record_full_wait_1): Adjust. No longer re-increment the PC.
3436 (record_full_wait_1): Adjust. Use
3437 record_check_stopped_by_breakpoint instead of breakpoint_here_p.
3438 (record_full_stopped_by_watchpoint): Adjust.
3439 (record_full_stopped_by_sw_breakpoint)
3440 (record_full_supports_stopped_by_sw_breakpoint)
3441 (record_full_supports_stopped_by_sw_breakpoint)
3442 (record_full_stopped_by_hw_breakpoint)
3443 (record_full_supports_stopped_by_hw_breakpoint): New functions.
3444 (init_record_full_ops, init_record_full_core_ops): Install them.
3445 * record.c (record_check_stopped_by_breakpoint): New function.
3446 * record.h: Include target/waitstatus.h.
3447 (record_check_stopped_by_breakpoint): New declaration.
3449 2015-03-04 Pedro Alves <palves@redhat.com>
3451 enum lwp_stop_reason -> enum target_stop_reason
3452 * linux-nat.c (linux_resume_one_lwp, check_stopped_by_watchpoint)
3453 (linux_nat_stopped_by_watchpoint, status_callback)
3454 (linux_nat_wait_1): Adjust.
3455 * linux-nat.h (enum lwp_stop_reason): Delete.
3456 (struct lwp_info) <stop_reason>: Now an enum target_stop_reason.
3457 * x86-linux-nat.c (x86_linux_prepare_to_resume): Adjust.
3458 * target/waitstatus.h (enum target_stop_reason): New.
3460 2015-03-04 Pedro Alves <palves@redhat.com>
3462 * breakpoint.c (need_moribund_for_location_type): New function.
3463 (bpstat_stop_status): Don't skipping checking moribund locations
3464 of breakpoint types which the target tell caused a stop.
3465 (program_breakpoint_here_p): New function, factored out from ...
3466 (bp_loc_is_permanent): ... this.
3467 (update_global_location_list): Don't create a moribund location if
3468 the target supports reporting stops of the type of the removed
3470 * breakpoint.h (program_breakpoint_here_p): New declaration.
3471 * infrun.c (adjust_pc_after_break): Return early if the target has
3472 already adjusted the PC. Add comments.
3473 (handle_signal_stop): If nothing explains a signal, and the target
3474 tells us the stop was caused by a software breakpoint, check if
3475 there's a breakpoint instruction in the memory. If so, adjust the
3476 PC before presenting the stop to the user. Otherwise, ignore the
3477 trap. If nothing explains a signal, and the target tells us the
3478 stop was caused by a hardware breakpoint, ignore the trap.
3479 * target.h (struct target_ops) <to_stopped_by_sw_breakpoint,
3480 to_supports_stopped_by_sw_breakpoint, to_stopped_by_hw_breakpoint,
3481 to_supports_stopped_by_hw_breakpoint>: New fields.
3482 (target_stopped_by_sw_breakpoint)
3483 (target_supports_stopped_by_sw_breakpoint)
3484 (target_stopped_by_hw_breakpoint)
3485 (target_supports_stopped_by_hw_breakpoint): Define.
3486 * target-delegates.c: Regenerate.
3488 2015-03-04 Pedro Alves <palves@redhat.com>
3490 * infrun.c (follow_fork_inferior): Use the whole of the
3491 inferior_ptid and pending_follow.related_pid ptids instead of
3492 building ptids from the process components. Adjust verbose output
3493 to use target_pid_to_str.
3494 * linux-nat.c (linux_child_follow_fork): Use the whole of the
3495 inferior_ptid and pending_follow.related_pid ptids instead of
3496 building ptids from the process components.
3498 2015-03-04 Mark Kettenis <kettenis@gnu.org>
3500 * inf-ptrace.c [PT_GET_PROCESS_STATE]
3501 (inf_ptrace_insert_fork_catchpoint): New function.
3502 (inf_ptrace_remove_fork_catchpoint): New function.
3503 (inf_ptrace_target) [PT_GET_PROCESS_STATE]: Install them.
3505 2015-03-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
3507 * s390-linux-tdep.c (s390_register_name): Return empty string
3508 instead of NULL for registers that shouldn't be visible.
3510 2015-03-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
3512 * s390-linux-tdep.c (s390_gdbarch_init): Use the correct syscall
3513 XML file for 64-bit targets.
3515 2015-03-03 Simon Marchi <simon.marchi@ericsson.com>
3517 * target.h (find_default_create_inferior): Remove declaration.
3518 (find_default_attach): Likewise.
3520 2015-03-03 Pedro Alves <palves@redhat.com>
3522 * inf-ptrace.c (inf_ptrace_resume): Remove spurious whitespace.
3523 Use ptid_get_pid to get the overall process id when resuming all
3526 2015-03-03 Pedro Alves <palves@redhat.com>
3528 * i386-linux-nat.c (i386_linux_resume): Get the ptrace PID out of
3529 the lwp field of ptid. Pass the full ptid to get_thread_regcache.
3530 * inf-ptrace.c (get_ptrace_pid): New function.
3531 (inf_ptrace_resume): Use it.
3532 * linux-nat.c (linux_resume_one_lwp): Pass the LWP's ptid ummodified
3535 2015-03-03 Markus Metzger <markus.t.metzger@intel.com>
3537 * nat/linux-btrace.c: Include sys/utsname.h.
3538 (linux_determine_kernel_ptr_bits): New.
3539 (linux_enable_bts): Call linux_determine_kernel_ptr_bits.
3540 * x86-linux-nat.c (x86_linux_enable_btrace): Do not overwrite non-zero
3543 2015-03-03 Markus Metzger <markus.t.metzger@intel.com>
3545 * btrace.c (ftrace_update_function): Treat return as tailcall for
3546 "_dl_runtime_resolve".
3548 2015-03-03 Markus Metzger <markus.t.metzger@intel.com>
3550 * btrace.h (btrace_function) <lbegin, lend>: Remove.
3551 * btrace.c (ftrace_debug): Do not print the line range.
3552 (ftrace_skip_file, ftrace_update_lines): Remove.
3553 (ftrace_new_function): Remove lbegin and lend initialization.
3554 (btrace_compute_ftrace_bts): Remove call to ftrace_update_lines.
3555 * record-btrace.c (btrace_compute_src_line_range): New.
3556 (btrace_call_history_src_line): Call btrace_compute_src_line_range.
3558 2015-03-02 Pedro Alves <palves@redhat.com>
3560 * infrun.c (follow_exec): Delete all threads of the process except
3561 the event thread. Extended comments.
3563 2015-03-02 Joel Brobecker <brobecker@adacore.com>
3565 * contrib/ari/gdb_ari.sh: Reinstate checks for "true" and "false".
3567 2015-03-02 Joel Brobecker <brobecker@adacore.com>
3569 * utils.h: Remove <stdbool.h> #include.
3570 (producer_is_gcc): Change return type to "int".
3571 * utils.c (producer_is_gcc): Change return type to int.
3572 Return 1 instead of true, and 0 instead of false.
3573 Adjust function documentation accordingly.
3575 2015-03-02 Andreas Arnez <arnez@linux.vnet.ibm.com>
3577 * s390-linux-nat.c (have_regset_vxrs): New static variable.
3578 (s390_linux_fetch_inferior_registers): Handle vector registers, if
3580 (s390_linux_store_inferior_registers): Likewise.
3581 (s390_get_hwcap): Remove function. Embed its logic...
3582 (s390_read_description): ...here. Yield a target description with
3583 vector registers if applicable.
3584 * s390-linux-tdep.c: Include "features/s390-vx-linux64.c",
3585 "features/s390-tevx-linux64.c", "features/s390x-vx-linux64.c", and
3586 "features/s390x-tevx-linux64.c".
3587 (struct gdbarch_tdep) <v0_full_regnum>: New field.
3588 (s390_dwarf_regmap): Add vector registers. Remove bogus entries
3589 for "GNU/Linux-specific registers".
3590 (s390_dwarf_reg_r0l): New enum value.
3591 (s390_dwarf_reg_to_regnum): Support vector registers.
3592 (s390_adjust_frame_regnum): Adjust pseudo DWARF register numbers
3593 of GPR lower halves.
3594 (regnum_is_vxr_full): New function.
3595 (s390_register_name): New function.
3596 (s390_pseudo_register_name): Handle v0-v15, which are composed of
3597 f0-f15 and v0l-v15l.
3598 (s390_pseudo_register_type): Likewise.
3599 (s390_pseudo_register_read): Likewise.
3600 (s390_pseudo_register_write): Likewise.
3601 (s390_value_from_register): Account for the fact that values are
3602 placed left-justified in vector registers.
3603 (s390_pseudo_register_reggroup_p): Add pseudo registers v0-v15 to
3604 the vector reggroup and omit them from the general reggroup.
3605 (s390_regmap_vxrs_low, s390_regmap_vxrs_high): New register maps.
3606 (s390_vxrs_low_regset, s390_vxrs_high_regset): New regsets.
3607 (s390_iterate_over_regset_sections): Add iterations for the two
3609 (s390_core_read_description): Yield a target description with
3610 vector registers if applicable.
3611 (s390_gdbarch_init): Handle target descriptions with vector
3612 registers. Add "register_name" gdbarch method.
3613 (_initialize_s390_tdep): Call new tdesc initialization functions.
3614 * s390-linux-tdep.h (HWCAP_S390_VX): New macro.
3615 (S390_V0_LOWER_REGNUM, S390_V1_LOWER_REGNUM, S390_V2_LOWER_REGNUM)
3616 (S390_V3_LOWER_REGNUM, S390_V4_LOWER_REGNUM, S390_V5_LOWER_REGNUM)
3617 (S390_V6_LOWER_REGNUM, S390_V7_LOWER_REGNUM, S390_V8_LOWER_REGNUM)
3618 (S390_V9_LOWER_REGNUM, S390_V10_LOWER_REGNUM)
3619 (S390_V11_LOWER_REGNUM, S390_V12_LOWER_REGNUM)
3620 (S390_V13_LOWER_REGNUM, S390_V14_LOWER_REGNUM)
3621 (S390_V15_LOWER_REGNUM, S390_V16_REGNUM, S390_V17_REGNUM)
3622 (S390_V18_REGNUM, S390_V19_REGNUM, S390_V20_REGNUM)
3623 (S390_V21_REGNUM, S390_V22_REGNUM, S390_V23_REGNUM)
3624 (S390_V24_REGNUM, S390_V25_REGNUM, S390_V26_REGNUM)
3625 (S390_V27_REGNUM, S390_V28_REGNUM, S390_V29_REGNUM)
3626 (S390_V30_REGNUM, S390_V31_REGNUM): New macros.
3627 (S390_NUM_REGS): Adjust value.
3628 (s390_vxrs_low_regset, s390_vxrs_high_regset): Declare.
3629 (tdesc_s390_vx_linux64, tdesc_s390_tevx_linux64)
3630 (tdesc_s390x_vx_linux64, tdesc_s390x_tevx_linux64): Likewise.
3631 * NEWS: Announce S/390 vector register support.
3633 2015-03-02 Andreas Arnez <arnez@linux.vnet.ibm.com>
3635 * features/s390-tevx-linux64.xml: New file.
3636 * features/s390-vx-linux64.xml: New file.
3637 * features/s390-vx.xml: New file.
3638 * features/s390x-tevx-linux64.xml: New file.
3639 * features/s390x-vx-linux64.xml: New file.
3640 * features/Makefile (WHICH): Add s390-vx-linux64,
3641 s390x-vx-linux64, s390-tevx-linux64, and s390x-tevx-linux64.
3642 (s390-vx-linux64-expedite, s390-tevx-linux64-expedite)
3643 (s390x-vx-linux64-expedite, s390x-tevx-linux64-expedite): New
3645 * features/s390-tevx-linux64.c: New generated file.
3646 * features/s390-vx-linux64.c: Likewise.
3647 * features/s390x-tevx-linux64.c: Likewise.
3648 * features/s390x-vx-linux64.c: Likewise.
3649 * regformats/s390-tevx-linux64.dat: Likewise.
3650 * regformats/s390-vx-linux64.dat: Likewise.
3651 * regformats/s390x-tevx-linux64.dat: Likewise.
3652 * regformats/s390x-vx-linux64.dat: Likewise.
3654 2015-02-28 Doug Evans <xdje42@gmail.com>
3656 * symtab.h (struct symtab) <next>: Fix comment.
3658 2015-02-27 Simon Marchi <simon.marchi@ericsson.com>
3660 * python/python.c (python_GdbModuleDef): Rename GdbMethods to
3663 2015-02-27 Pedro Alves <palves@redhat.com>
3665 * dtrace-probe.c (dtrace_probe_ops): Make extern.
3667 2015-02-27 Pedro Alves <palves@redhat.com>
3669 * common/common-exceptions.h (exception_none): Declare.
3670 * common/common-exceptions.c (exception_none): Moved from
3672 (exceptions_state_mc_init): Use exception_none.
3673 * exceptions.c (exception_none): Move to
3674 common/common-exceptions.c.
3675 * exceptions.h (exception_none): Move to
3676 common/common-exceptions.h.
3678 2015-02-27 Pedro Alves <palves@redhat.com>
3680 * main.c (catch_command_errors, catch_command_errors_const):
3681 Remove 'mask' argument. Adjust.
3682 (captured_main): Adjust callers.
3684 2015-02-27 Pedro Alves <palves@redhat.com>
3686 * python/python-internal.h: Include "extension-priv.h".
3688 2015-02-27 Pedro Alves <palves@redhat.com>
3690 * breakpoint.h (enum print_stop_action): Move further up in the
3693 2015-02-27 Pedro Alves <palves@redhat.com>
3695 * gdbarch.sh: Include regcache.h.
3696 * gdbarch.h: Regenerate.
3698 2015-02-27 Pedro Alves <palves@redhat.com>
3700 * arm-tdep.c (decode_insn) <arm_handle_insn, thumb_handle_insn>:
3701 Remove duplicate const.
3702 * sparc-sol2-tdep.c (sparc_sol2_static_transform_name): Remove
3705 2015-02-27 Pedro Alves <palves@redhat.com>
3707 * cp-valprint.c (vtbl_ptr_name): Use EXPORTED_CONST.
3708 * guile/guile.c (extension_language_guile): Use EXPORTED_CONST.
3709 * features/feature_to_c.sh: Tag the generated xml_builtin array
3710 with extern const in C++ mode.
3712 2015-02-27 Tom Tromey <tromey@redhat.com>
3714 * minidebug.c (struct lzma_stream): Rename to ...
3715 (struct gdb_lzma_stream): ... this.
3716 (lzma_open, lzma_pread, lzma_close, lzma_stat): Adjust.
3718 2015-02-27 Pedro Alves <palves@redhat.com>
3720 * mi/mi-cmd-stack.c (mi_apply_ext_lang_frame_filter): New
3722 (mi_cmd_stack_list_locals, mi_cmd_stack_list_args)
3723 (mi_cmd_stack_list_variables): Use it.
3725 2015-02-27 Pedro Alves <palves@redhat.com>
3727 * x86-linux-nat.c (u_debugreg_offset): New function.
3728 (x86_linux_dr_get, x86_linux_dr_set): Use it.
3730 2015-02-27 Pedro Alves <palves@redhat.com>
3732 * nat/x86-dregs.h (enum target_hw_bp_type): Remove forward
3734 Include break-common.h.
3736 2015-02-27 Tom Tromey <tromey@redhat.com>
3737 Pedro Alves <palves@redhat.com>
3739 * arm-tdep.c (set_fp_model_sfunc, arm_set_abi): Use 'int' for
3740 local used to iterate over enums.
3741 * completer.c (signal_completer): Likewise.
3742 * i386-tdep.c (i386_stap_parse_special_token): Likewise.
3743 * rs6000-tdep.c (powerpc_set_vector_abi): Likewise.
3744 * tui/tui-data.c (tui_next_win, tui_prev_win): Likewise.
3745 * tui/tui-layout.c (next_layout, prev_layout): Likewise.
3746 * tui/tui-win.c (tui_refresh_all_win, tui_rehighlight_all)
3747 (tui_resize_all, tui_set_focus_command, tui_all_windows_info): Likewise.
3748 * tui-wingeneral.c (tui_refresh_all): Likewise.
3750 2015-02-27 Pedro Alves <palves@redhat.com>
3752 * target.h: Include "infrun.h".
3754 2015-02-27 Pedro Alves <palves@redhat.com>
3756 * gdb_proc_service.h: Wrap with EXTERN_C_PUSH/EXTERN_C_POP.
3758 2015-02-27 Pedro Alves <palves@redhat.com>
3760 * common/agent.h (IPA_SYM_EXPORTED_NAME): New.
3762 * common/common-defs.h (EXTERN_C_PUSH, EXTERN_C_POP): New macros.
3764 2015-02-27 Pedro Alves <palves@redhat.com>
3766 * cli-out.c (_rl_erase_entire_line): Move declaration out of
3767 cli_mld_erase_entire_line, and make it extern "C".
3768 * common/common-defs.h (EXTERN_C): New.
3769 * completer.c (_rl_completion_prefix_display_length)
3770 (_rl_print_completions_horizontally, QSFUNC): Move declarations
3771 out of gdb_display_match_list_1.
3772 (_rl_qsort_string_compare): Move declaration out of
3773 gdb_display_match_list_1, and make it extern "C".
3774 * defs.h (re_comp): Use EXTERN_C.
3775 * maint.c (_mcleanup): Move declaration out of mcleanup_wrapper,
3776 and make it extern "C".
3777 (monstartup): Move declaration out of maintenance_set_profile_cmd,
3778 and make it extern "C".
3779 (main): Move declaration out of maintenance_set_profile_cmd.
3780 * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason_string): Use
3783 2015-02-27 Pedro Alves <palves@redhat.com>
3785 * python/python.c (GdbMethods): Rename to ...
3786 (python_GdbMethods): ... this and make extern.
3787 (GdbModuleDef): Rename to ...
3788 (python_GdbModuleDef): ... this and make extern.
3790 2015-02-27 Pedro Alves <palves@redhat.com>
3792 * record-btrace.c (set_record_btrace_cmdlist)
3793 (show_record_btrace_cmdlist): Remove redefinitions.
3795 2015-02-27 Tom Tromey <tromey@redhat.com>
3796 Pedro Alves <palves@redhat.com>
3798 * dwarf2-frame.c (enum cfa_how_kind, struct
3799 dwarf2_frame_state_reg_info): Move out of struct
3801 * dwarf2read.c (struct tu_stats): Move out of struct
3803 (struct file_entry): Move out of struct line_header.
3804 (struct nextfield, struct nextfnfield, struct fnfieldlist, struct
3805 typedef_field_list): Move out of struct field_info.
3806 * gdbtypes.h (enum dynamic_prop_kind, union dynamic_prop_data):
3807 Move out of struct dynamic_prop.
3808 (union type_owner, union field_location, struct field, struct
3809 range_bounds, union type_specific): Move out of struct main_type.
3810 (struct fn_fieldlist, struct fn_field, struct typedef_field)
3811 (VOFFSET_STATIC): Move out of struct cplus_struct_type.
3812 (struct call_site_target, union call_site_parameter_u, struct
3813 call_site_parameter): Move out of struct call_site.
3814 * m32c-tdep.c (enum m32c_prologue_kind): Move out of struct
3816 (enum srcdest_kind): Move out of struct srcdest.
3817 * main.c (enum cmdarg_kind): Move out of struct cmdarg.
3818 * prologue-value.h (enum prologue_value_kind): Move out of struct
3820 * s390-linux-tdep.c (enum s390_abi_kind): Move out of struct
3822 * stabsread.c (struct nextfield, struct next_fnfieldlist): Move
3823 out of struct field_info.
3824 * symfile.h (struct other_sections): Move out of struct
3826 * symtab.c (struct symbol_cache_slot): Move out struct
3828 * target-descriptions.c (enum tdesc_type_kind): Move out of
3829 typedef struct tdesc_type.
3830 * tui/tui-data.h (enum tui_line_or_address_kind): Move out of
3831 struct tui_line_or_address.
3832 * value.c (enum internalvar_kind, union internalvar_data): Move
3833 out of struct internalvar.
3834 * xtensa-tdep.h (struct ctype_cache): Move out of struct
3837 2015-02-27 Tom Tromey <tromey@redhat.com>
3838 Pedro Alves <palves@redhat.com>
3840 Rename symbols whose names are reserved C++ keywords throughout.
3842 2015-02-27 Pedro Alves <palves@redhat.com>
3844 * Makefile.in (COMPILER): New, get it from autoconf.
3845 (COMPILE.pre, CC_LD): Use COMPILER.
3846 (CXX): Get from autoconf instead.
3847 (CXX_FOR_TARGET): Default to g++ instead of gcc.
3848 * acinclude.m4: Include build-with-cxx.m4.
3849 * build-with-cxx.m4: New file.
3850 * configure.ac: Call AC_PROG_CXX and GDB_AC_BUILD_WITH_CXX.
3851 Disable -Werror by default if building in C++ mode.
3852 (build_warnings): Add -Wno-sign-compare, -Wno-write-strings and
3853 -Wno-narrowing in C++ mode. Only enable -Wpointer-sign in C mode.
3854 Run supported-warning-flags tests with the C++ compiler.
3855 Save/restore CXXFLAGS too.
3856 * configure: Regenerate.
3858 2015-02-27 Pedro Alves <palves@redhat.com>
3860 * libiberty.m4: New file.
3861 * acinclude.m4: Include libiberty.m4.
3862 * configure.ac: Call libiberty_INIT.
3863 * config.in, configure: Regenerate.
3865 2015-02-27 Andreas Arnez <arnez@linux.vnet.ibm.com>
3867 * s390-linux-tdep.c (s390_gcc_target_options): Not just handle
3868 31-bit targets, but 64-bit targets as well.
3869 (s390_gnu_triplet_regexp): New function.
3870 (s390_gdbarch_init): Set the gcc_target_options gdbarch method for
3871 64-bit targets as well. Set the gnu_triplet_regexp gdbarch
3874 2015-02-27 Jon TURNEY <jon.turney@dronecode.org.uk> (tiny patch)
3876 * windows-nat.c (CONTEXT_DEBUGGER): Remove.
3877 (CONTEXT_DEBUGGER_DR): Add CONTEXT_SEGMENTS. Incorporate flags
3878 from CONTEXT_DEBUGGER.
3880 2015-02-26 Doug Evans <dje@google.com>
3882 * gdbtypes.c (internal_type_vptr_fieldno): Add missing call to
3884 (set_type_vptr_fieldno): Ditto.
3885 (internal_type_vptr_basetype, set_type_vptr_basetype): Ditto.
3886 * gnu-v3-abi.c (gnuv3_dynamic_class): Ditto.
3888 2015-02-26 Pedro Alves <palves@redhat.com>
3890 * auto-load.h (file_is_auto_load_safe): Add ATTRIBUTE_PRINTF.
3891 * complaints.c (vcomplaint): Pass argument FMT directly to
3892 printf-like functions instead of complaint->fmt.
3893 * ctf.c (ctf_save_write_metadata): Add ATTRIBUTE_PRINTF.
3894 * darwin-nat.c (inferior_debug): Add ATTRIBUTE_PRINTF.
3895 * compile/compile-loc2c.c (pushf, unary, binary): Add
3897 (do_compile_dwarf_expr_to_c): Pass string literal as format string
3899 (BINARY): Pass string literal as format string to 'binary'.
3900 * compile/compile-object-load.c (link_callbacks_einfo): Add
3902 * guile/guile-internal.h (gdbscm_printf): Add ATTRIBUTE_PRINTF.
3904 2015-02-26 Pedro Alves <palves@redhat.com>
3906 * windows-termcap.c: Rename to ...
3907 * stub-termcap.c: ... this. Adjust header line.
3908 * Makefile.in (SFILES): Refer to stub-termcap.c instead of
3910 * configure: Regenerate.
3911 * configure.ac: Refer to stub-termcap.o instead of
3913 * gdb_curses.h: Mention stub-termcap.c instead of
3916 2015-02-26 Jan Kratochvil <jan.kratochvil@redhat.com>
3918 * compile/compile-c-symbols.c (convert_one_symbol, convert_symbol_bmsym)
3919 (gcc_symbol_address): Call gnu_ifunc_resolve_addr.
3921 2015-02-26 Antoine Tremblay <antoine.tremblay@ericsson.com>
3923 * gdb/infcmd.c (print_return_value): use type_to_string to print type.
3925 2015-02-26 Jan Kratochvil <jan.kratochvil@redhat.com>
3927 * elfread.c (elf_read_minimal_symbols): Use bfd_alloc for
3928 bfd_canonicalize_symtab.
3930 2015-02-25 John Baldwin <jhb@FreeBSD.org>
3932 * amd64fbsd-nat.c: Include sys/user.h.
3933 (_initialize_amd64fbsd_nat): Use the KERN_PROC_SIGTRAMP sysctl
3934 instead of KERN_PS_STRINGS to locate the signal trampoline.
3935 * i386fbsd-nat.c: Include sys/user.h.
3936 (_initialize_i386fbsd_nat): Use the KERN_PROC_SIGTRAMP sysctl
3937 instead of KERN_PS_STRINGS to locate the signal trampoline.
3938 * amd64fbsd-tdep.c (amd64fbsd_sigtramp_code): New.
3939 (amd64fbsd_sigtramp_p): New.
3940 (amd64fbsd_sigtramp_start_addr, amd64fbsd_sigtramp_end_addr): No
3941 longer set default values.
3942 (amd64fbsd_init_abi): Set "sigtramp_p" to "amd64fbsd_sigtramp_p".
3943 * i386fbsd-tdep.c (i386fbsd_sigtramp_start)
3944 (i386fbsd_sigtramp_middle, i386fbsd_sigtramp_end)
3945 (i386fbsd_freebsd4_sigtramp_start)
3946 (i386fbsd_freebsd4_sigtramp_middle)
3947 (i386fbsd_freebsd4_sigtramp_end, i386fbsd_osigtramp_start)
3948 (i386fbsd_osigtramp_middle, i386fbsd_osigtramp_end): New.
3949 (i386fbsd_sigtramp_p): New.
3950 (i386fbsd_sigtramp_start_addr, i386fbsd_sigtramp_end_addr): No
3951 longer set default values.
3952 (i386fbsd_init_abi): Set "sigtramp_p" to "i386fbsd_sigtramp_p".
3954 2015-02-25 John Baldwin <jhb@freebsd.org>
3956 * amd64fbsd-tdep.c (amd64fbsd_sigcontext_addr): Use
3957 get_frame_register instead of frame_unwind_register_unsigned.
3959 2015-02-26 Jan Kratochvil <jan.kratochvil@redhat.com>
3962 * compile/compile-c-support.c (c_compute_program): Change // comment.
3963 * compile/compile-object-load.c (setup_sections): Change // comment.
3965 2015-02-26 Joel Brobecker <brobecker@adacore.com>
3968 * iq2000-tdep.c (iq2000_frame_cache): Delete C++-style comment.
3970 2015-02-23 Pedro Alves <palves@redhat.com>
3972 * remote.c (skip_to_semicolon): New function.
3973 (remote_parse_stop_reply) <T stop reply>: Use it. Don't
3974 special case the stop reasons that look like hex numbers
3975 upfront. Instead handle real register numbers after matching
3976 all the known stop reasons.
3978 2015-02-21 Doug Evans <dje@google.com>
3980 PR c++/17976, symtab/17821
3981 * cp-namespace.c (cp_search_static_and_baseclasses): New parameter
3982 is_in_anonymous. All callers updated.
3983 (find_symbol_in_baseclass): Ditto.
3984 (cp_lookup_nested_symbol_1): Ditto. Don't search all static blocks
3985 for symbols in an anonymous namespace.
3986 * dwarf2read.c (namespace_name): Don't call dwarf2_name, fetch
3987 DW_AT_name directly.
3988 (dwarf2_name): Convert missing namespace name to
3989 CP_ANONYMOUS_NAMESPACE_STR.
3991 2015-02-20 Pedro Alves <palves@redhat.com>
3993 * linux-nat.c (linux_handle_extended_wait): Call
3994 thread_db_notice_clone whenever a new clone LWP is detected.
3995 (linux_stop_and_wait_all_lwps, linux_unstop_all_lwps): New
3997 * linux-nat.h (thread_db_attach_lwp): Delete declaration.
3998 (thread_db_notice_clone, linux_stop_and_wait_all_lwps)
3999 (linux_unstop_all_lwps): Declare.
4000 * linux-thread-db.c (struct thread_get_info_inout): Delete.
4001 (thread_get_info_callback): Delete.
4002 (thread_from_lwp): Use td_thr_get_info and record_thread.
4003 (thread_db_attach_lwp): Delete.
4004 (thread_db_notice_clone): New function.
4005 (try_thread_db_load_1): If /proc is mounted and shows the
4006 process'es task list, walk over all LWPs and call thread_from_lwp
4007 instead of relying on td_ta_thr_iter.
4008 (attach_thread): Don't call check_thread_signals here. Split the
4009 tail part of the function (which adds the thread to the core GDB
4011 (record_thread): ... this function. Call check_thread_signals
4013 (thread_db_wait): Don't call thread_db_find_new_threads_1. Always
4014 call thread_from_lwp.
4015 (thread_db_update_thread_list): Rename to ...
4016 (thread_db_update_thread_list_org): ... this.
4017 (thread_db_update_thread_list): New function.
4018 (thread_db_find_thread_from_tid): Delete.
4019 (thread_db_get_ada_task_ptid): Simplify.
4020 * nat/linux-procfs.c: Include <sys/stat.h>.
4021 (linux_proc_task_list_dir_exists): New function.
4022 * nat/linux-procfs.h (linux_proc_task_list_dir_exists): Declare.
4024 2015-02-20 Pedro Alves <palves@redhat.com>
4026 * linux-nat.c (lin_lwp_attach_lwp): No longer special case the
4027 main LWP. Handle the case of waitpid returning 0 if we're already
4028 attached to the LWP. Don't set the LWP's last_resume_kind to
4029 resume_stop if we already knew about the LWP.
4030 (linux_nat_filter_event): Add debug logs.
4032 2015-02-20 Pedro Alves <palves@redhat.com>
4034 * target.h (forward_target_decr_pc_after_break): Delete
4037 2015-02-20 Pedro Alves <palves@redhat.com>
4040 * linux-thread-db.c (thread_get_info_callback): Return early if
4041 the thread's lwp id is -1.
4043 2015-02-20 Joel Brobecker <brobecker@adacore.com>
4047 2015-02-19 Steve Ellcey <sellcey@imgtec.com>
4049 * dtrace-probe.c (dtrace_process_dof_probe): Initialize arg.expr.
4050 (dtrace_get_probes) Change type of variable 'dof'.
4052 2015-02-19 Antoine Tremblay <antoine.tremblay@ericsson.com>
4054 PR breakpoints/16812
4055 * linux-nat.c (linux_nat_filter_event): Report SIGTRAP,SIGILL,SIGSEGV.
4056 * nat/linux-ptrace.c (linux_wstatus_maybe_breakpoint): Add.
4057 * nat/linux-ptrace.h: Add linux_wstatus_maybe_breakpoint.
4059 2015-02-19 David Taylor <dtaylor@emc.com>
4061 * common/ax.def (setv): Fix consumed entry in setv DEFOP.
4063 2015-02-18 Patrick Palka <patrick@parcs.ath.cx>
4065 * tui/tui-io.c (tui_handle_resize_during_io): Remove this
4067 (tui_putc): Don't call tui_handle_resize_during_io.
4068 (tui_getc): Likewise.
4069 (tui_mld_getc): Likewise.
4070 * tui/tui-win.c: Include event-loop.h and tui/tui-io.h.
4071 (tui_sigwinch_token): New static variable.
4072 (tui_initialize_win): Adjust documentation. Set
4074 (tui_async_resize_screen): New asynchronous callback.
4075 (tui_sigwinch_handler): Adjust documentation. Asynchronously
4076 invoke tui_async_resize_screen.
4078 2015-02-18 Jose E. Marchesi <jose.marchesi@oracle.com>
4080 * configure: Regenerated.
4081 * configure.ac: Use GDB_AC_TRANSFORM.
4082 * Makefile.in (aclocal_m4_deps): Added transform.m4.
4083 * acinclude.m4: sinclude transform.m4.
4084 * transform.m4: New file.
4085 (GDB_AC_TRANSFORM): New macro.
4087 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
4089 * NEWS: Announce the support for DTrace SDT probes.
4091 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
4093 * amd64-linux-tdep.c: Include "parser-defs.h" and "user-regs.h".
4094 (amd64_dtrace_parse_probe_argument): New function.
4095 (amd64_dtrace_probe_is_enabled): Likewise.
4096 (amd64_dtrace_enable_probe): Likewise.
4097 (amd64_dtrace_disable_probe): Likewise.
4098 (amd64_linux_init_abi): Register the
4099 `gdbarch_dtrace_probe_argument', `gdbarch_dtrace_enable_probe',
4100 `gdbarch_dtrace_disable_probe' and
4101 `gdbarch_dtrace_probe_is_enabled' hooks.
4102 (amd64_dtrace_disabled_probe_sequence_1): New constant.
4103 (amd64_dtrace_disabled_probe_sequence_2): Likewise.
4104 (amd64_dtrace_enable_probe_sequence): Likewise.
4105 (amd64_dtrace_disable_probe_sequence): Likewise.
4107 2015-01-17 Jose E. Marchesi <jose.marchesi@oracle.com>
4109 * breakpoint.c (BREAK_ARGS_HELP): Help string updated to mention
4110 the -probe-dtrace new vpossible value for PROBE_MODIFIER.
4111 * configure.ac (CONFIG_OBS): dtrace-probe.o added if BFD can
4113 * Makefile.in (SFILES): dtrace-probe.c added.
4114 * configure: Regenerate.
4115 * dtrace-probe.c: New file.
4116 (SHT_SUNW_dof): New constant.
4117 (dtrace_probe_type): New enum.
4118 (dtrace_probe_arg): New struct.
4119 (dtrace_probe_arg_s): New typedef.
4120 (struct dtrace_probe_enabler): New struct.
4121 (dtrace_probe_enabler_s): New typedef.
4122 (dtrace_probe): New struct.
4123 (dtrace_probe_is_linespec): New function.
4124 (dtrace_dof_sect_type): New enum.
4125 (dtrace_dof_dofh_ident): Likewise.
4126 (dtrace_dof_encoding): Likewise.
4127 (DTRACE_DOF_ENCODE_LSB): Likewise.
4128 (DTRACE_DOF_ENCODE_MSB): Likewise.
4129 (dtrace_dof_hdr): New struct.
4130 (dtrace_dof_sect): Likewise.
4131 (dtrace_dof_provider): Likewise.
4132 (dtrace_dof_probe): Likewise.
4133 (DOF_UINT): New macro.
4134 (DTRACE_DOF_PTR): Likewise.
4135 (DTRACE_DOF_SECT): Likewise.
4136 (dtrace_process_dof_probe): New function.
4137 (dtrace_process_dof): Likewise.
4138 (dtrace_build_arg_exprs): Likewise.
4139 (dtrace_get_arg): Likewise.
4140 (dtrace_get_probes): Likewise.
4141 (dtrace_get_probe_argument_count): Likewise.
4142 (dtrace_can_evaluate_probe_arguments): Likewise.
4143 (dtrace_evaluate_probe_argument): Likewise.
4144 (dtrace_compile_to_ax): Likewise.
4145 (dtrace_probe_destroy): Likewise.
4146 (dtrace_gen_info_probes_table_header): Likewise.
4147 (dtrace_gen_info_probes_table_values): Likewise.
4148 (dtrace_probe_is_enabled): Likewise.
4149 (dtrace_probe_ops): New variable.
4150 (info_probes_dtrace_command): New function.
4151 (_initialize_dtrace_probe): Likewise.
4152 (dtrace_type_name): Likewise.
4154 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
4156 * gdbarch.sh (dtrace_parse_probe_argument): New.
4157 (dtrace_probe_is_enabled): Likewise.
4158 (dtrace_enable_probe): Likewise.
4159 (dtrace_disable_probe): Likewise.
4160 * gdbarch.c: Regenerate.
4161 * gdbarch.h: Regenerate.
4163 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
4165 * stap-probe.c (stap_probe_ops): Add NULLs in the static
4166 stap_probe_ops for `enable_probe' and `disable_probe'.
4167 * probe.c (enable_probes_command): New function.
4168 (disable_probes_command): Likewise.
4169 (_initialize_probe): Define the cli commands `enable probe' and
4171 (parse_probe_linespec): New function.
4172 (info_probes_for_ops): Use parse_probe_linespec.
4173 * probe.h (probe_ops): New hooks `enable_probe' and
4176 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
4178 * probe.c (compute_probe_arg): Moved from stap-probe.c
4179 (compile_probe_arg): Likewise.
4180 (probe_funcs): Likewise.
4181 * stap-probe.c (compute_probe_arg): Moved to probe.c.
4182 (compile_probe_arg): Likewise.
4183 (probe_funcs): Likewise.
4185 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
4187 * probe.c (print_ui_out_not_applicables): New function.
4188 (exists_probe_with_pops): Likewise.
4189 (info_probes_for_ops): Do not include column headers for probe
4190 types for which no probe has been actually found on any object.
4191 Also invoke `print_ui_out_not_applicables' in order to match the
4192 column rows with the header when probes of several types are
4194 Print the "Type" column.
4195 * probe.h (probe_ops): Added a new probe operation `type_name'.
4196 * stap-probe.c (stap_probe_ops): Add `stap_type_name'.
4197 (stap_type_name): New function.
4199 2015-02-17 Patrick Palka <patrick@parcs.ath.cx>
4201 * tui/tui-io.c (tui_getc): Don't call key_is_command_char.
4202 (key_is_command_char): Delete.
4204 2015-02-17 Pedro Alves <palves@redhat.com>
4206 * tui/tui.c (tui_enable): Resize windows before anything
4207 might show a window.
4209 2015-02-17 Max Ostapenko <m.ostapenko@partner.samsung.com>
4212 * aarch64-linux-nat.c: Don't include features/aarch64.c anymore.
4213 (aarch64_linux_read_description): Remove initialize_tdesc_aarch64
4215 * aarch64-tdep.h (tdesc_aarch64): Declare.
4217 2015-02-12 Mark Wielaard <mjw@redhat.com>
4219 * contrib/ari/gdb_ari.sh: Remove checks for "true" and "false".
4221 2015-02-13 Doug Evans <dje@google.com>
4223 * cp-namespace.c (cp_basic_lookup_symbol): Rename parameter
4224 anonymous_namespace to is_in_anonymous for consistency with the rest
4226 (cp_lookup_bare_symbol): Fix typo in comment.
4227 (cp_search_static_and_baseclasses): Ditto.
4228 (search_symbol_list): Use vertical space in comment better.
4229 (reset_directive_searched): Ditto. Fix typo.
4230 (cp_lookup_nested_symbol_1): Clarify contents of NESTED_NAME parameter.
4232 2015-02-13 Yao Qi <yao.qi@arm.com>
4234 * MAINTAINERS: Update my email address.
4236 2015-02-12 Doug Evans <dje@google.com>
4238 * symtab.c (completion_list_add_name): Fix memory leak.
4240 2015-02-12 Doug Evans <dje@google.com>
4242 * completer.c (complete_line): Remove incorrect comment.
4244 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
4246 * python/py-framefilter.c (py_print_single_arg, enumerate_locals)
4247 (py_print_frame): Use RETURN_MASK_ERROR.
4249 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
4251 * python/py-framefilter.c (py_print_frame): Mention RETURN_QUIT in
4252 function comment. Wrap all function that can throw in cleanups.
4253 (gdbpy_apply_frame_filter): Wrap all function that can throw in
4256 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
4258 * python/py-framefilter.c (py_print_frame): Substitute goto error.
4259 Remove the error label.
4261 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
4263 * python/py-framefilter.c (py_print_frame): Put conditional code paths
4264 with goto first, indent the former else codepath left. Put variable
4265 'elided' to a new inner block.
4267 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
4269 * python/py-framefilter.c (py_print_frame): Whitespacing fixes.
4271 2015-02-11 Pedro Alves <palves@redhat.com>
4273 * xcoffread.c (within_function): Delete.
4275 2015-02-11 Tom Tromey <tromey@redhat.com>
4276 Pedro Alves <palves@redhat.com>
4278 * breakpoint.c (base_breakpoint_ops): Delete.
4279 * dwarf2loc.c (dwarf_expr_ctx_funcs): Make extern.
4280 * elfread.c (elf_sym_fns_gdb_index, elf_sym_fns_lazy_psyms): Make extern.
4281 * guile/guile.c (guile_extension_script_ops, guile_extension_ops): Make extern.
4282 * ppcnbsd-tdep.c (ppcnbsd2_sigtramp): Make extern.
4283 * python/py-arch.c (arch_object_type): Make extern.
4284 * python/py-block.c (block_syms_iterator_object_type): Make extern.
4285 * python/py-bpevent.c (breakpoint_event_object_type): Make extern.
4286 * python/py-cmd.c (cmdpy_object_type): Make extern.
4287 * python/py-continueevent.c (continue_event_object_type)
4288 * python/py-event.h (GDBPY_NEW_EVENT_TYPE): Remove 'qual'
4289 parameter. Update all callers.
4290 * python/py-evtregistry.c (eventregistry_object_type): Make extern.
4291 * python/py-exitedevent.c (exited_event_object_type): Make extern.
4292 * python/py-finishbreakpoint.c (finish_breakpoint_object_type): Make extern.
4293 * python/py-function.c (fnpy_object_type): Make extern.
4294 * python/py-inferior.c (inferior_object_type, membuf_object_type): Make extern.
4295 * python/py-infevents.c (call_pre_event_object_type)
4296 (inferior_call_post_event_object_type).
4297 (memory_changed_event_object_type): Make extern.
4298 * python/py-infthread.c (thread_object_type): Make extern.
4299 * python/py-lazy-string.c (lazy_string_object_type): Make extern.
4300 * python/py-linetable.c (linetable_entry_object_type)
4301 (linetable_object_type, ltpy_iterator_object_type): Make extern.
4302 * python/py-newobjfileevent.c (new_objfile_event_object_type)
4303 (clear_objfiles_event_object_type): Make extern.
4304 * python/py-objfile.c (objfile_object_type): Make extern.
4305 * python/py-param.c (parmpy_object_type): Make extern.
4306 * python/py-progspace.c (pspace_object_type): Make extern.
4307 * python/py-signalevent.c (signal_event_object_type): Make extern.
4308 * python/py-symtab.c (symtab_object_type, sal_object_type): Make extern.
4309 * python/py-type.c (type_object_type, field_object_type)
4310 (type_iterator_object_type): Make extern.
4311 * python/python.c (python_extension_script_ops)
4312 (python_extension_ops): Make extern.
4313 * stap-probe.c (stap_probe_ops): Make extern.
4315 2015-02-11 Pedro Alves <pedro@codesourcery.com>
4317 * infrun.c (adjust_pc_after_break): Don't adjust the PC just
4318 because the event thread is not the current thread.
4320 2015-02-11 Doug Evans <xdje42@gmail.com>
4322 * gdbtypes.c (internal_type_self_type): If TYPE_SPECIFIC_FIELD hasn't
4323 been initialized yet, return NULL.
4325 2015-02-11 Doug Evans <dje@google.com>
4327 * symfile.h (new_symfile_objfile): Delete.
4328 * symfile.c (finish_new_objfile): Renamed from new_symfile_objfile.
4329 All callers updated.
4331 2015-02-11 Patrick Palka <patrick@parcs.ath.cx>
4333 * tui/tui-io.c (tui_handle_resize_during_io): Call
4334 tui_update_gdb_sizes() after resizing the screen.
4335 * tui/tui.c (tui_enable): Resize the terminal before
4336 calling tui_update_gdb_sizes().
4338 2015-02-11 Patrick Palka <patrick@parcs.ath.cx>
4340 * tui/tui-io.c (tui_getc): Move cursor to the end of the command
4341 line before printing a newline.
4343 2015-02-11 Mark Wielaard <mjw@redhat.com>
4345 * utils.c (producer_is_gcc): Return true or false.
4347 2015-02-10 Mark Wielaard <mjw@redhat.com>
4349 * utils.h (producer_is_gcc): Change return type to bool. Add major
4351 * utils.c (producer_is_gcc): Likewise.
4352 (producer_is_gcc_ge_4): Adjust producer_is_gcc call.
4353 * dwarf2read.c (check_producer): Likewise.
4355 2015-02-10 Pedro Alves <palves@redhat.com>
4357 * infrun.c (displaced_step_fixup): Switch to the event thread
4358 before calling gdbarch_displaced_step_fixup.
4360 2015-02-10 Antoine Tremblay <antoine.tremblay@ericsson.com>
4362 * MAINTAINERS (Write After Approval): Add Antoine Tremblay.
4364 2015-02-10 Simon Marchi <simon.marchi@ericsson.com>
4366 * ada-varobj.c (ada_name_of_child): Constify parent.
4367 (ada_path_expr_of_child): Same.
4368 (ada_value_of_child): Same.
4369 (ada_type_of_child): Same.
4370 * c-varobj.c (c_is_path_expr_parent): Same.
4371 (c_describe_child): Same.
4372 (c_name_of_child): Same.
4373 (c_value_of_child): Same.
4374 (c_type_of_child): Same.
4375 (cplus_number_of_children): Same.
4376 (cplus_describe_child): Constify var.
4377 (cplus_name_of_child): Constify parent.
4378 (cplus_value_of_child): Same.
4379 (cplus_type_of_child): Same.
4380 * jv-varobj.c (java_name_of_child): Same.
4381 (java_value_of_child): Same.
4382 (java_type_of_child): Same.
4383 * varobj.c (value_of_child): Same.
4384 (varobj_default_is_path_expr_parent): Constify var, parent and return
4386 (varobj_get_path_expr): Constify var, modify path_expr through
4388 (install_new_value): Constify parent.
4389 (value_of_child): Constify parent.
4390 * varobj.h (struct varobj): Constify parent.
4391 (struct lang_varobj_ops): Constify name_of_child, value_of_child and
4393 (varobj_get_path_expr): Constify var.
4394 (varobj_get_path_expr_parent): Constify var and return value.
4396 2015-02-10 Luis Machado <lgustavo@codesourcery.com>
4398 * arm-tdep.c (arm_prologue_unwind_stop_reason): New function.
4399 (arm_prologue_this_id): Move PC and SP limit checks to
4400 arm_prologue_unwind_stop_reason.
4401 (arm_prologue_unwind) <stop_reason> : Set to
4402 arm_prologue_unwind_stop_reason.
4404 2015-02-09 Mark Wielaard <mjw@redhat.com>
4406 * dwarf2read.c (set_cu_language): Recognize DW_LANG_Fortran03 and
4407 DW_LANG_Fortran08 as language_fortran.
4409 2015-02-09 Sergio Durigan Junior <sergiodj@redhat.com>
4412 * gdb/remote.c (remote_parse_stop_reply): Fix wrong comparison
4413 of pointer against char.
4415 2015-02-09 Mark Wielaard <mjw@redhat.com>
4417 * c-typeprint.c (cp_type_print_method_args): Handle '_Atomic'.
4418 (c_type_print_modifier): Likewise.
4419 * dwarf2read.c (read_tag_atomic_type): New function.
4420 (read_type_die_1): Handle DW_TAG_atomic_type.
4421 * gdbtypes.c (make_atomic_type): New function.
4422 (recursive_dump_type): Handle TYPE_ATOMIC.
4423 * gdbtypes.h (enum type_flag_values): Renumber.
4424 (enum type_instance_flag_value): Add TYPE_INSTANCE_FLAG_ATOMIC.
4425 (TYPE_ATOMIC): New macro.
4426 (make_atomic_type): Declare.
4428 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
4430 * btrace.c (ftrace_find_call): Skip gaps.
4431 (ftrace_new_function): Initialize level.
4432 (ftrace_new_call, ftrace_new_tailcall, ftrace_new_return)
4433 (ftrace_new_switch): Update
4435 (ftrace_new_gap): New.
4436 (ftrace_update_function): Create new function after gap.
4437 (btrace_compute_ftrace_bts): Create gap on error.
4438 (btrace_stitch_bts): Update parameters. Clear trace if it
4440 (btrace_stitch_trace): Update parameters. Update callers.
4441 (btrace_clear): Reset the number of gaps.
4442 (btrace_insn_get): Return NULL if the iterator points to a gap.
4443 (btrace_insn_number): Return zero if the iterator points to a gap.
4444 (btrace_insn_end): Allow gaps at the end.
4445 (btrace_insn_next, btrace_insn_prev, btrace_insn_cmp): Handle gaps.
4446 (btrace_find_insn_by_number): Assert that the found iterator does
4448 (btrace_call_next, btrace_call_prev): Assert that the last function
4450 * btrace.h (btrace_bts_error): New.
4451 (btrace_function): Update comment.
4452 (btrace_function) <insn, insn_offset, number>: Update comment.
4453 (btrace_function) <errcode>: New.
4454 (btrace_thread_info) <ngaps>: New.
4455 (btrace_thread_info) <replay>: Update comment.
4456 (btrace_insn_get): Update comment.
4457 * record-btrace.c (btrace_ui_out_decode_error): New.
4458 (record_btrace_info): Print number of gaps.
4459 (btrace_insn_history, btrace_call_history): Call
4460 btrace_ui_out_decode_error for gaps.
4461 (record_btrace_step_thread, record_btrace_start_replaying): Skip gaps.
4463 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
4465 * common/btrace-common.h (btrace_cpu_vendor, btrace_cpu): New.
4466 * nat/linux-btrace.c: (btrace_this_cpu): New.
4467 (cpu_supports_bts): Call btrace_this_cpu.
4468 (intel_supports_bts): Add cpu parameter.
4470 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
4472 * btrace.h (btrace_insn_class): New.
4473 (btrace_insn) <size, iclass>: New.
4474 * btrace.c (ftrace_find_call): Update parameters. Update users.
4475 Use instruction classification.
4476 (ftrace_new_return): Update parameters. Update users.
4477 (ftrace_update_function): Update parameters. Update users. Use
4478 instruction classification.
4479 (ftrace_update_insns): Update parameters. Update users.
4480 (ftrace_classify_insn): New.
4481 (btrace_compute_ftrace_bts): Fill in new btrace_insn fields. Add
4482 TRY_CATCH around call to gdb_insn_length.
4484 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
4486 * btrace.c (btrace_compute_ftrace_bts, btrace_compute_ftrace):
4487 Update parameters. Update users.
4489 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
4491 * btrace.c (parse_xml_btrace_conf_bts): Add size.
4492 (btrace_conf_bts_attributes): New.
4493 (btrace_conf_children): Add attributes.
4494 * common/btrace-common.h (btrace_config_bts): New.
4495 (btrace_config)<bts>: New.
4496 (btrace_config): Update comment.
4497 * nat/linux-btrace.c (linux_enable_btrace, linux_enable_bts):
4499 * features/btrace-conf.dtd: Increment version. Add size
4500 attribute to bts element.
4501 * record-btrace.c (set_record_btrace_bts_cmdlist,
4502 show_record_btrace_bts_cmdlist): New.
4503 (record_btrace_adjust_size, record_btrace_print_bts_conf,
4504 record_btrace_print_conf, cmd_set_record_btrace_bts,
4505 cmd_show_record_btrace_bts): New.
4506 (record_btrace_info): Call record_btrace_print_conf.
4507 (_initialize_record_btrace): Add commands.
4508 * remote.c: Add PACKET_Qbtrace_conf_bts_size enum.
4509 (remote_protocol_features): Add Qbtrace-conf:bts:size packet.
4510 (btrace_sync_conf): Synchronize bts size.
4511 (_initialize_remote): Add Qbtrace-conf:bts:size packet.
4512 * NEWS: Announce new commands and new packets.
4514 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
4516 * Makefile.in (XMLFILES): Add btrace-conf.dtd.
4517 * x86-linux-nat.c (x86_linux_enable_btrace): Update parameters.
4518 (x86_linux_btrace_conf): New.
4519 (x86_linux_create_target): Initialize to_btrace_conf.
4520 * nat/linux-btrace.c (linux_enable_btrace): Update parameters.
4521 Check format. Split into this and ...
4522 (linux_enable_bts): ... this.
4523 (linux_btrace_conf): New.
4524 (perf_event_skip_record): Renamed into ...
4525 (perf_event_skip_bts_record): ... this. Updated users.
4526 (linux_disable_btrace): Split into this and ...
4527 (linux_disable_bts): ... this.
4528 (linux_read_btrace): Check format.
4529 * nat/linux-btrace.h (linux_enable_btrace): Update parameters.
4530 (linux_btrace_conf): New.
4531 (btrace_target_info)<ptid>: Moved.
4532 (btrace_target_info)<conf>: New.
4533 (btrace_target_info): Split into this and ...
4534 (btrace_tinfo_bts): ... this. Updated users.
4535 * btrace.c (btrace_enable): Update parameters.
4536 (btrace_conf, parse_xml_btrace_conf_bts, parse_xml_btrace_conf)
4537 (btrace_conf_children, btrace_conf_attributes)
4538 (btrace_conf_elements): New.
4539 * btrace.h (btrace_enable): Update parameters.
4540 (btrace_conf, parse_xml_btrace_conf): New.
4541 * common/btrace-common.h (btrace_config): New.
4542 * feature/btrace-conf.dtd: New.
4543 * record-btrace.c (record_btrace_conf): New.
4544 (record_btrace_cmdlist): New.
4545 (record_btrace_enable_warn, record_btrace_open): Pass
4546 &record_btrace_conf.
4547 (record_btrace_info): Print recording format.
4548 (cmd_record_btrace_bts_start): New.
4549 (cmd_record_btrace_start): Call cmd_record_btrace_bts_start.
4550 (_initialize_record_btrace): Add "record btrace bts" subcommand.
4551 Add "record bts" alias command.
4552 * remote.c (remote_state)<btrace_config>: New.
4553 (remote_btrace_reset, PACKET_qXfer_btrace_conf): New.
4554 (remote_protocol_features): Add qXfer:btrace-conf:read.
4555 (remote_open_1): Call remote_btrace_reset.
4556 (remote_xfer_partial): Handle TARGET_OBJECT_BTRACE_CONF.
4557 (btrace_target_info)<conf>: New.
4558 (btrace_sync_conf, btrace_read_config): New.
4559 (remote_enable_btrace): Update parameters. Call btrace_sync_conf and
4561 (remote_btrace_conf): New.
4562 (init_remote_ops): Initialize to_btrace_conf.
4563 (_initialize_remote): Add qXfer:btrace-conf packet.
4564 * target.c (target_enable_btrace): Update parameters.
4565 (target_btrace_conf): New.
4566 * target.h (target_enable_btrace): Update parameters.
4567 (target_btrace_conf): New.
4568 (target_object)<TARGET_OBJECT_BTRACE_CONF>: New.
4569 (target_ops)<to_enable_btrace>: Update parameters and comment.
4570 (target_ops)<to_btrace_conf>: New.
4571 * target-delegates: Regenerate.
4572 * target-debug.h (target_debug_print_const_struct_btrace_config_p)
4573 (target_debug_print_const_struct_btrace_target_info_p): New.
4574 * NEWS: Announce new command and new packet.
4576 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
4578 * nat/linux-btrace.h (perf_event_buffer): New.
4579 (btrace_target_info) <buffer, size, data_head>: Replace with ...
4581 * nat/linux-btrace.c (perf_event_header, perf_event_mmap_size)
4582 (perf_event_buffer_size, perf_event_buffer_begin)
4583 (perf_event_buffer_end, linux_btrace_has_changed): Removed.
4585 (perf_event_new_data): New.
4587 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
4589 * btrace.c (btrace_enable): Pass BTRACE_FORMAT_BTS.
4590 * record-btrace.c (record_btrace_open): Remove call to
4591 target_supports_btrace.
4592 * remote.c (remote_supports_btrace): Update parameters.
4593 * target.c (target_supports_btrace): Update parameters.
4594 * target.h (to_supports_btrace, target_supports_btrace): Update
4596 * target-delegates.c: Regenerate.
4597 * target-debug.h (target_debug_print_enum_btrace_format): New.
4598 * nat/linux-btrace.c
4599 (kernel_supports_btrace): Rename into ...
4600 (kernel_supports_bts): ... this. Update users. Update warning text.
4601 (intel_supports_btrace): Rename into ...
4602 (intel_supports_bts): ... this. Update users.
4603 (cpu_supports_btrace): Rename into ...
4604 (cpu_supports_bts): ... this. Update users.
4605 (linux_supports_btrace): Update parameters. Split into this and ...
4606 (linux_supports_bts): ... this.
4607 * nat/linux-btrace.h (linux_supports_btrace): Update parameters.
4609 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
4611 * Makefile.in (SFILES): Add common/btrace-common.c.
4612 (COMMON_OBS): Add common/btrace-common.o.
4613 (btrace-common.o): Add build rules.
4614 * btrace.c (parse_xml_btrace): Update parameters.
4615 (parse_xml_btrace_block): Set format field.
4616 (btrace_add_pc, btrace_fetch): Use struct btrace_data.
4617 (do_btrace_data_cleanup, make_cleanup_btrace_data): New.
4618 (btrace_compute_ftrace): Split into this and...
4619 (btrace_compute_ftrace_bts): ...this.
4620 (btrace_stitch_trace): Split into this and...
4621 (btrace_stitch_bts): ...this.
4622 * btrace.h (parse_xml_btrace): Update parameters.
4623 (make_cleanup_btrace_data): New.
4624 * common/btrace-common.c: New.
4625 * common/btrace-common.h: Include common-defs.h.
4626 (btrace_block_s): Update comment.
4627 (btrace_format): New.
4628 (btrace_format_string): New.
4629 (btrace_data_bts): New.
4631 (btrace_data_init, btrace_data_fini, btrace_data_empty): New.
4632 * remote.c (remote_read_btrace): Update parameters.
4633 * target.c (target_read_btrace): Update parameters.
4634 * target.h (target_read_btrace): Update parameters.
4635 (target_ops)<to_read_btrace>: Update parameters.
4636 * x86-linux-nat.c (x86_linux_read_btrace): Update parameters.
4637 * target-delegates.c: Regenerate.
4638 * target-debug (target_debug_print_struct_btrace_data_p): New.
4639 * nat/linux-btrace.c (linux_read_btrace): Split into this and...
4640 (linux_read_bts): ...this.
4641 * nat/linux-btrace.h (linux_read_btrace): Update parameters.
4643 2015-02-06 Doug Evans <dje@google.com>
4645 * remote-m32r-sdi.c: Include symfile.h.
4647 2015-02-06 Doug Evans <dje@google.com>
4649 * symtab.h (clear_symtab_users, deduce_language_from_filename): Move
4650 * symfile.h (clear_symtab_users, deduce_language_from_filename): ...
4653 2015-02-06 Pedro Alves <palves@redhat.com>
4655 * linux-thread-db.c (find_new_threads_callback): Add debug output.
4657 2015-02-06 Simon Marchi <simon.marchi@ericsson.com>
4660 * breakpoint.c (map_breakpoint_numbers): Check for empty args string.
4661 (enable_count_command): Check args for NULL value.
4663 2015-02-05 Doug Evans <xdje42@gmail.com>
4665 * guile/scm-frame.c: Fix spelling errors in a comment.
4667 2015-02-04 Jan Kratochvil <jan.kratochvil@redhat.com>
4669 * python/python-internal.h (Py_hash_t): Define it for Python <3.2.
4670 * python/py-value.c (valpy_fetch_lazy): Use it. Remove cast to the
4673 2015-02-04 Pedro Alves <palves@redhat.com>
4675 * linux-nat.c (handle_extended_wait): Don't resume LWPs here.
4676 (wait_lwp): Don't call wait_lwp if linux_handle_extended_wait
4678 (resume_stopped_resumed_lwps): Don't check whether the thread is
4679 marked as executing.
4680 (linux_nat_wait_1): Use resume_stopped_resumed_lwps.
4682 2015-02-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
4684 * regset.h (struct regset): Add flags field.
4685 (REGSET_VARIABLE_SIZE): New value for a regset's flags field.
4686 * corelow.c (get_core_register_section): Add warning if the size
4687 exceeds the requested size and the regset does not have the
4688 REGSET_VARIABLE_SIZE flag set.
4689 * alphanbsd-tdep.c (alphanbsd_gregset): Add REGSET_VARIABLE_SIZE
4691 * armbsd-tdep.c (armbsd_gregset): Likewise.
4692 * hppa-hpux-tdep.c (hppa_hpux_regset): Likewise.
4693 * hppaobsd-tdep.c (hppaobsd_gregset): Likewise.
4694 * m68kbsd-tdep.c (m68kbsd_gregset): Likewise.
4695 * mipsnbsd-tdep.c (mipsnbsd_gregset): Likewise.
4697 2015-02-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
4699 * amd64-linux-tdep.c (amd64_linux_iterate_over_regset_sections):
4700 For ".reg-xstate", explicitly specify the requested section size
4701 via X86_XSTATE_SIZE instead of just 0 on input and
4702 X86_XSTATE_MAX_SIZE on output.
4703 * i386-linux-tdep.c (i386_linux_iterate_over_regset_sections):
4706 2015-02-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
4709 * gdbarch.sh (iterate_over_regset_sections_cb): Document this
4710 function type, particularly its SIZE parameter.
4711 * gdbarch.h: Regenerate.
4712 * amd64-tdep.c (amd64_supply_fpregset): In gdb_assert, compare
4713 actual against required size using ">=" instead of "==".
4714 (amd64_collect_fpregset): Likewise.
4715 * i386-tdep.c (i386_supply_gregset): Likewise.
4716 (i386_collect_gregset): Likewise.
4717 (i386_supply_fpregset): Likewise.
4718 (i386_collect_fpregset): Likewise.
4719 * mips-linux-tdep.c (mips_supply_gregset_wrapper): Likewise.
4720 (mips_fill_gregset_wrapper): Likewise.
4721 (mips_supply_fpregset_wrapper): Likewise.
4722 (mips_fill_fpregset_wrapper): Likewise.
4723 (mips64_supply_gregset_wrapper): Likewise.
4724 (mips64_fill_gregset_wrapper): Likewise.
4725 (mips64_supply_fpregset_wrapper): Likewise.
4726 (mips64_fill_fpregset_wrapper): Likewise.
4727 * mn10300-linux-tdep.c (am33_supply_gregset_method): Likewise.
4728 (am33_supply_fpregset_method): Likewise.
4729 (am33_collect_gregset_method): Likewise.
4730 (am33_collect_fpregset_method): Likewise.
4732 2015-02-04 Doug Evans <dje@google.com>
4733 Pedro Alves <palves@redhat.com>
4734 Eli Zaretskii <eliz@gnu.org>
4737 * tui/tui-command.c (tui_refresh_cmd_win): New function.
4738 * tui/tui-command.c (tui_refresh_cmd_win): Declare.
4739 * tui/tui-file.c: #include tui/tui-command.h.
4740 (tui_file_fputs): Refresh command window if stream is not gdb_stdout.
4741 (tui_file_flush): Refresh command window if stream is gdb_stdout.
4742 * tui/tui-io.c (tui_puts): Remove calls to wrefresh, fflush.
4744 2015-02-04 Pedro Alves <palves@redhat.com>
4747 * event-loop.c (gdb_do_one_event): Add default switch case.
4749 2015-02-03 Jan Kratochvil <jan.kratochvil@redhat.com>
4751 Filter out inferior gcc option -fpreprocessed.
4752 * compile/compile.c (filter_args): New function.
4755 2015-02-03 Pedro Alves <palves@redhat.com>
4757 * event-loop.c: Don't declare nor define a queue type for
4759 (event_queue): Delete.
4760 (create_event, create_file_event, gdb_event_xfree)
4761 (initialize_event_loop, process_event): Delete.
4762 (gdb_do_one_event): Return as soon as one event is handled.
4763 (handle_file_event): Change prototype. Used the passed in
4764 file_handler pointer and ready_mask instead of looping over all
4766 (gdb_wait_for_event): Update the poll/select timeouts before
4767 blocking. Run event handlers directly instead of queueing events.
4768 Return as soon as one event is handled.
4769 (struct async_event_handler_data): Delete.
4770 (invoke_async_event_handler): Delete.
4771 (check_async_event_handlers): Change return type to int. Run
4772 event handlers directly instead of queueing events. Return as
4773 soon as one event is handled.
4774 (handle_timer_event): Delete.
4775 (update_wait_timeout): New function, factored out from
4777 (poll_timers): Reimplement.
4778 * event-loop.h (initialize_event_loop): Delete declaration.
4779 * top.c (gdb_init): Don't call initialize_event_loop.
4781 2015-02-03 Pedro Alves <palves@redhat.com>
4783 * event-loop.c (clear_async_event_handler): New function.
4784 * event-loop.h (clear_async_event_handler): New declaration.
4785 * record-btrace.c (record_btrace_async): New function.
4786 (init_record_btrace_ops): Install record_btrace_async.
4787 * record-full.c (record_full_async): New function.
4788 (record_full_resume): Don't mark the async event source here.
4789 (init_record_full_ops): Install record_full_async.
4790 (record_full_core_resume): Don't mark the async event source here.
4791 (init_record_full_core_ops): Install record_full_async.
4792 * remote.c (remote_async): Mark and clear the async stop reply
4793 queue event-loop token as appropriate.
4795 2015-02-03 Pedro Alves <palves@redhat.com>
4797 * linux-nat.c (linux_child_follow_fork, linux_nat_wait_1): Use
4798 target_is_async_p instead of target_can_async.
4799 (linux_nat_wait): Use target_is_async_p instead of
4800 target_can_async. Don't enable async here.
4801 * remote.c (interrupt_query, remote_wait, putpkt_binary): Use
4802 target_is_async_p instead of target_can_async.
4804 2015-02-02 Simon Marchi <simon.marchi@ericsson.com>
4806 * varobj.h (lang_varobj_ops): Mention which return values need
4809 2015-02-02 Joel Brobecker <brobecker@adacore.com>
4811 * dwarf2loc.c (dwarf2_evaluate_property): Add i18n marker.
4813 2015-02-02 Joel Brobecker <brobecker@adacore.com>
4816 * ada-lang.c (ada_lookup_symbol_list_worker): Do not re-cache
4817 results found in the cache.
4819 2015-02-02 Joel Brobecker <brobecker@adacore.com>
4822 * ada-lang.c (ada_get_symbol_cache): Set pspace_data->sym_cache
4823 when allocating a new one.
4825 2015-02-01 Tom Tromey <tom@tromey.com>
4827 * MAINTAINERS: Remove myself.
4829 2015-01-31 Doug Evans <xdje42@gmail.com>
4831 * dwarf2read.c (process_structure_scope): Update setting of
4832 TYPE_VPTR_BASETYPE, TYPE_VPTR_FIELDNO.
4833 * gdbtypes.c (internal_type_vptr_fieldno): New function.
4834 (set_type_vptr_fieldno): New function.
4835 (internal_type_vptr_basetype): New function.
4836 (set_type_vptr_basetype): New function.
4837 (get_vptr_fieldno): Update setting of TYPE_VPTR_FIELDNO,
4839 (allocate_cplus_struct_type): Initialize vptr_fieldno.
4840 (recursive_dump_type): Printing of vptr_fieldno, vptr_basetype ...
4841 (print_cplus_stuff): ... moved here.
4842 (copy_type_recursive): Don't copy TYPE_VPTR_BASETYPE.
4843 * gdbtypes.h (struct main_type): Members vptr_fieldno, vptr_basetype
4845 (struct cplus_struct_type): ... here. All uses updated.
4846 (TYPE_VPTR_FIELDNO, TYPE_VPTR_BASETYPE): Rewrite.
4847 (internal_type_vptr_fieldno, set_type_vptr_fieldno): Declare.
4848 (internal_type_vptr_basetype, set_type_vptr_basetype): Declare.
4849 * stabsread.c (read_tilde_fields): Update setting of
4850 TYPE_VPTR_FIELDNO, TYPE_VPTR_BASETYPE.
4852 2015-01-31 Doug Evans <xdje42@gmail.com>
4854 * cp-valprint.c (cp_find_class_member): Rename parameter domain_p
4856 (cp_print_class_member): Rename local domain to self_type.
4857 * dwarf2read.c (quirk_gcc_member_function_pointer): Rename local
4858 domain_type to self_type.
4859 (set_die_type) <need_gnat_info>: Handle
4860 TYPE_CODE_METHODPTR, TYPE_CODE_MEMBERPTR, TYPE_CODE_METHOD.
4861 * gdb-gdb.py (StructMainTypePrettyPrinter): Handle
4862 TYPE_SPECIFIC_SELF_TYPE.
4863 * gdbtypes.c (internal_type_self_type): New function.
4864 (set_type_self_type): New function.
4865 (smash_to_memberptr_type): Rename parameter domain to self_type.
4866 Update setting of TYPE_SELF_TYPE.
4867 (smash_to_methodptr_type): Update setting of TYPE_SELF_TYPE.
4868 (smash_to_method_type): Rename parameter domain to self_type.
4869 Update setting of TYPE_SELF_TYPE.
4870 (check_stub_method): Call smash_to_method_type.
4871 (recursive_dump_type): Handle TYPE_SPECIFIC_SELF_TYPE.
4872 (copy_type_recursive): Ditto.
4873 * gdbtypes.h (enum type_specific_kind): New value
4874 TYPE_SPECIFIC_SELF_TYPE.
4875 (struct main_type) <type_specific>: New member self_type.
4876 (struct cplus_struct_type) <fn_field.type>: Update comment.
4877 (TYPE_SELF_TYPE): Rewrite.
4878 (internal_type_self_type, set_type_self_type): Declare.
4879 * gnu-v3-abi.c (gnuv3_print_method_ptr): Rename local domain to
4881 (gnuv3_method_ptr_to_value): Rename local domain_type to self_type.
4882 * m2-typeprint.c (m2_range): Replace TYPE_SELF_TYPE with
4884 * stabsread.c (read_member_functions): Mark methods with
4885 TYPE_CODE_METHOD, not TYPE_CODE_FUNC. Update setting of
4888 2015-01-31 Doug Evans <xdje42@gmail.com>
4890 * gdbtypes.h (TYPE_SELF_TYPE): Renamed from TYPE_DOMAIN_TYPE.
4893 2015-01-31 Doug Evans <xdje42@gmail.com>
4895 * gnu-v3-abi.c (gnuv3_dynamic_class): Assert only passed structs
4896 or unions. Return zero if union.
4897 (gnuv3_get_vtable): Call check_typedef. Assert only passed structs.
4898 (gnuv3_rtti_type): Pass already-check_typedef'd value to
4900 (compute_vtable_size): Assert only passed structs.
4901 (gnuv3_print_vtable): Don't call gnuv3_get_vtable for non-structs.
4903 2015-01-31 Doug Evans <xdje42@gmail.com>
4905 * gdbtypes.c (copy_type_recursive): Handle all TYPE_SPECIFIC_FIELD
4908 2015-01-31 Gary Benson <gbenson@redhat.com>
4909 Doug Evans <dje@google.com>
4914 * cli/cli-cmds.c (complete_command): Notify user if max-completions
4916 * common/common-exceptions.h (enum errors)
4917 <MAX_COMPLETIONS_REACHED_ERROR>: New value.
4918 * completer.h (get_max_completions_reached_message): New declaration.
4919 (max_completions): Likewise.
4920 (completion_tracker_t): New typedef.
4921 (new_completion_tracker): New declaration.
4922 (make_cleanup_free_completion_tracker): Likewise.
4923 (maybe_add_completion_enum): New enum.
4924 (maybe_add_completion): New declaration.
4925 (throw_max_completions_reached_error): Likewise.
4926 * completer.c (max_completions): New global variable.
4927 (new_completion_tracker): New function.
4928 (free_completion_tracker): Likewise.
4929 (make_cleanup_free_completion_tracker): Likewise.
4930 (maybe_add_completions): Likewise.
4931 (throw_max_completions_reached_error): Likewise.
4932 (complete_line): Remove duplicates and limit result to max_completions
4934 (get_max_completions_reached_message): New function.
4935 (gdb_display_match_list): Handle max_completions.
4936 (_initialize_completer): New declaration and function.
4937 * symtab.c: Include completer.h.
4938 (completion_tracker): New static variable.
4939 (completion_list_add_name): Call maybe_add_completion.
4940 (default_make_symbol_completion_list_break_on_1): Renamed from
4941 default_make_symbol_completion_list_break_on. Maintain
4942 completion_tracker across calls to completion_list_add_name.
4943 (default_make_symbol_completion_list_break_on): New function.
4944 * top.c (init_main): Set rl_completion_display_matches_hook.
4945 * tui/tui-io.c: Include completer.h.
4946 (tui_old_rl_display_matches_hook): New static global.
4947 (tui_rl_display_match_list): Notify user if max-completions reached.
4948 (tui_setup_io): Save/restore rl_completion_display_matches_hook.
4949 * NEWS (New Options): Mention set/show max-completions.
4951 2015-01-31 Gary Benson <gbenson@redhat.com>
4953 * symtab.c (struct add_name_data) <code>: New field.
4955 (add_symtab_completions): New function.
4956 (symtab_expansion_callback): Likewise.
4957 (default_make_symbol_completion_list_break_on): Set datum.code.
4958 Move minimal symbol scan before calling expand_symtabs_matching.
4959 Scan known primary symtabs for externs and statics before calling
4960 expand_symtabs_matching. Pass symtab_expansion_callback as
4961 expansion_notify argument to expand_symtabs_matching. Do not scan
4962 primary symtabs for externs and statics after calling
4963 expand_symtabs_matching.
4965 2015-01-31 Gary Benson <gbenson@redhat.com>
4967 * symfile.h (expand_symtabs_exp_notify_ftype): New typedef.
4968 (struct quick_symbol_functions) <expand_symtabs_matching>:
4969 New argument expansion_notify. All uses updated.
4970 (expand_symtabs_matching): New argument expansion_notify.
4972 * symfile-debug.c (debug_qf_expand_symtabs_matching):
4973 Also print expansion notify.
4974 * symtab.c (expand_symtabs_matching_via_partial): Call
4975 expansion_notify whenever a partial symbol table is expanded.
4976 * dwarf2read.c (dw2_expand_symtabs_matching): Call
4977 expansion_notify whenever a symbol table is instantiated.
4979 2015-01-31 Doug Evans <xdje42@gmail.com>
4981 * cli-out.c: #include completer.h, readline/readline.h.
4982 (cli_mld_crlf, cli_mld_putch, cli_mld_puts): New functions.
4983 (cli_mld_flush, cld_mld_erase_entire_line): Ditto.
4984 (cli_mld_beep, cli_mld_read_key, cli_display_match_list): Ditto.
4985 * cli-out.h (cli_display_match_list): Declare.
4986 * completer.c (MB_INVALIDCH, MB_NULLWCH): New macros.
4987 (ELLIPSIS_LEN): Ditto.
4988 (gdb_get_y_or_n, gdb_display_match_list_pager): New functions.
4989 (gdb_path_isdir, gdb_printable_part, gdb_fnwidth): Ditto.
4990 (gdb_fnprint, gdb_print_filename): Ditto.
4991 (gdb_complete_get_screenwidth, gdb_display_match_list_1): Ditto.
4992 (gdb_display_match_list): Ditto.
4993 * completer.h (mld_crlf_ftype, mld_putch_ftype): New typedefs.
4994 (mld_puts_ftype, mld_flush_ftype, mld_erase_entire_line_ftype): Ditto.
4995 (mld_beep_ftype, mld_read_key_ftype): Ditto.
4996 (match_list_displayer): New struct.
4997 (gdb_display_match_list): Declare.
4998 * top.c (init_main): Set rl_completion_display_matches_hook.
4999 * tui/tui-io.c: #include completer.h.
5000 (printable_part, PUTX, print_filename, get_y_or_n): Delete.
5001 (tui_mld_crlf, tui_mld_putch, tui_mld_puts): New functions.
5002 (tui_mld_flush, tui_mld_erase_entire_line, tui_mld_beep): Ditto.
5003 (tui_mld_getc, tui_mld_read_key): Ditto.
5004 (tui_rl_display_match_list): Rewrite.
5005 (tui_handle_resize_during_io): New arg for_completion. All callers
5008 2015-01-31 Doug Evans <xdje42@gmail.com>
5010 Add symbol lookup cache.
5011 * NEWS: Document new options and commands.
5012 * symtab.c (symbol_cache_key): New static global.
5013 (DEFAULT_SYMBOL_CACHE_SIZE, MAX_SYMBOL_CACHE_SIZE): New macros.
5014 (SYMBOL_LOOKUP_FAILED): New macro.
5015 (symbol_cache_slot_state): New enum.
5016 (block_symbol_cache): New struct.
5017 (symbol_cache): New struct.
5018 (new_symbol_cache_size, symbol_cache_size): New static globals.
5019 (hash_symbol_entry, eq_symbol_entry): New functions.
5020 (symbol_cache_byte_size, resize_symbol_cache): New functions.
5021 (make_symbol_cache, free_symbol_cache): New functions.
5022 (get_symbol_cache, symbol_cache_cleanup): New function.
5023 (set_symbol_cache_size, set_symbol_cache_size_handler): New functions.
5024 (symbol_cache_lookup, symbol_cache_clear_slot): New function.
5025 (symbol_cache_mark_found, symbol_cache_mark_not_found): New functions.
5026 (symbol_cache_flush, symbol_cache_dump): New functions.
5027 (maintenance_print_symbol_cache): New function.
5028 (maintenance_flush_symbol_cache): New function.
5029 (symbol_cache_stats): New function.
5030 (maintenance_print_symbol_cache_statistics): New function.
5031 (symtab_new_objfile_observer): New function.
5032 (symtab_free_objfile_observer): New function.
5033 (lookup_static_symbol, lookup_global_symbol): Use symbol cache.
5034 (_initialize_symtab): Init symbol_cache_key. New parameter
5035 maint symbol-cache-size. New maint commands print symbol-cache,
5036 print symbol-cache-statistics, flush-symbol-cache.
5037 Install new_objfile, free_objfile observers.
5039 2015-01-31 Joel Brobecker <brobecker@adacore.com>
5042 * symfile.c (clear_symtab_users): Move call to breakpoint_re_set
5045 2015-01-31 Doug Evans <xdje42@gmail.com>
5047 * NEWS: Mention inlined scripts in .debug_gdb_scripts section.
5048 * auto-load.c: #include ctype.h.
5049 (struct auto_load_pspace_info): Replace member loaded_scripts with
5050 new members loaded_script_files, loaded_script_texts.
5051 (auto_load_pspace_data_cleanup): Update.
5052 (init_loaded_scripts_info): Update.
5053 (get_auto_load_pspace_data_for_loading): Update.
5054 (maybe_add_script_file): Renamed from maybe_add_script. All callers
5056 (maybe_add_script_text): New function.
5057 (clear_section_scripts): Update.
5058 (source_script_file, execute_script_contents): New functions.
5059 (source_section_scripts): Add support for
5060 SECTION_SCRIPT_ID_PYTHON_TEXT, SECTION_SCRIPT_ID_GUILE_TEXT.
5061 (print_scripts): New function.
5062 (auto_load_info_scripts): Also print inlined scripts.
5063 (maybe_print_unsupported_script_warning): Renamed from
5064 unsupported_script_warning_print. All callers updated.
5065 (maybe_print_script_not_found_warning): Renamed from
5066 script_not_found_warning_print. All callers updated.
5067 * extension-priv.h (struct extension_language_script_ops): New member
5068 objfile_script_executor.
5069 * extension.c (ext_lang_objfile_script_executor): New function.
5070 * extension.h (objfile_script_executor_func): New typedef.
5071 (ext_lang_objfile_script_executor): Declare.
5072 * guile/guile-internal.h (gdbscm_execute_objfile_script): Declare.
5073 * guile/guile.c (guile_extension_script_ops): Update.
5074 * guile/scm-objfile.c (gdbscm_execute_objfile_script): New function.
5075 * python/python.c (python_extension_script_ops): Update.
5076 (gdbpy_execute_objfile_script): New function.
5078 2015-01-31 Eli Zaretskii <eliz@gnu.org>
5080 * tui/tui-io.c (tui_expand_tabs): New function.
5081 (tui_puts, tui_redisplay_readline): Expand TABs into the
5082 appropriate number of spaces.
5083 * tui/tui-regs.c: Include tui-io.h.
5084 (tui_register_format): Call tui_expand_tabs to expand TABs into
5085 the appropriate number of spaces.
5086 * tui/tui-io.h: Add prototype for tui_expand_tabs.
5088 2015-01-30 Doug Evans <dje@google.com>
5090 * NEWS: "info source" command now display producer string if present.
5091 * source.c (source_info): Print producer string if present.
5093 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
5095 * varobj.c (varobj_delete): Fix comment.
5097 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
5099 * varobj.c (create_child): Modify comment.
5101 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
5103 * ada-varobj.c (ada_number_of_children): Constify struct varobj *
5105 (ada_name_of_variable): Same.
5106 (ada_path_expr_of_child): Same.
5107 (ada_value_of_variable): Same.
5108 (ada_value_is_changeable_p): Same.
5109 (ada_value_has_mutated): Same.
5110 * c-varobj.c (varobj_is_anonymous_child): Same.
5111 (c_is_path_expr_parent): Same.
5112 (c_number_of_children): Same.
5113 (c_name_of_variable): Same.
5114 (c_path_expr_of_child): Same.
5116 (c_value_of_variable): Same.
5117 (cplus_number_of_children): Same.
5118 (cplus_name_of_variable): Same.
5119 (cplus_path_expr_of_child): Same.
5120 (cplus_value_of_variable): Same.
5121 * jv-varobj.c (java_number_of_children): Same.
5122 (java_name_of_variable): Same.
5123 (java_path_expr_of_child): Same.
5124 (java_value_of_variable): Same.
5125 * varobj.c (number_of_children): Same.
5126 (name_of_variable): Same.
5128 (varobj_ensure_python_env): Same.
5129 (varobj_get_objname): Same.
5130 (varobj_get_expression): Same.
5131 (varobj_get_display_format): Same.
5132 (varobj_get_display_hint): Same.
5133 (varobj_has_more): Same.
5134 (varobj_get_thread_id): Same.
5135 (varobj_get_frozen): Same.
5136 (dynamic_varobj_has_child_method): Same.
5137 (varobj_get_gdb_type): Same.
5138 (is_path_expr_parent): Same.
5139 (varobj_default_is_path_expr_parent): Same.
5140 (varobj_get_language): Same.
5141 (varobj_get_attributes): Same.
5142 (varobj_is_dynamic_p): Same.
5143 (varobj_get_child_range): Same.
5144 (varobj_value_has_mutated): Same.
5145 (varobj_get_value_type): Same.
5146 (number_of_children): Same.
5147 (name_of_variable): Same.
5148 (check_scope): Same.
5149 (varobj_editable_p): Same.
5150 (varobj_value_is_changeable_p): Same.
5151 (varobj_floating_p): Same.
5152 (varobj_default_value_is_changeable_p): Same.
5154 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
5156 * varobj.c (varobj_get_path_expr): Set var->path_expr.
5157 * c-varobj.c (c_path_expr_of_child): Set local var instead of
5159 (cplus_path_expr_of_child): Same.
5161 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
5163 * mi-cmd-var.c (print_varobj): Free varobj_get_expression
5165 (mi_cmd_var_info_expression): Same.
5166 * varobj.c (varobj_get_expression): Mention in the comment that
5167 the result must by freed by the caller.
5169 2015-01-30 Simon Marchi <simon.marchi@ericsson.com>
5171 * mi/mi-cmd-var.c (mi_cmd_var_info_type): Free result of
5173 (varobj_update_one): Same.
5174 * varobj.c (update_type_if_necessary): Free curr_type_str and
5176 (varobj_get_type): Specify in comment that the result needs to be
5177 freed by the caller.
5179 2015-01-29 Doug Evans <dje@google.com>
5182 * dwarf2read.c (dwarf_decode_line_header): Punt if version > 4.
5184 2015-01-25 Mark Wielaard <mjw@redhat.com>
5186 * dwarf2read.c (checkproducer): Call producer_is_gcc.
5187 * utils.c (producer_is_gcc_ge_4): Likewise.
5188 (producer_is_gcc): New function.
5189 * utils.h (producer_is_gcc): New declaration.
5191 2015-01-29 Joel Brobecker <brobecker@adacore.com>
5193 * gdbtypes.h (struct dynamic_prop): New PROP_ADDR_OFFSET enum
5195 * gdbtypes.c (resolve_dynamic_type_internal): Replace "addr"
5196 parameter by "addr_stack" parameter.
5197 (resolve_dynamic_range): Replace "addr" parameter by
5198 "stack_addr" parameter. Update function documentation.
5199 Update code accordingly.
5200 (resolve_dynamic_array, resolve_dynamic_union)
5201 (resolve_dynamic_struct, resolve_dynamic_type_internal): Likewise.
5202 (resolve_dynamic_type): Update code, following the changes made
5203 to resolve_dynamic_type_internal's interface.
5204 * dwarf2loc.h (struct property_addr_info): New.
5205 (dwarf2_evaluate_property): Replace "address" parameter
5206 by "addr_stack" parameter. Adjust function documentation.
5207 (struct dwarf2_offset_baton): New.
5208 (struct dwarf2_property_baton): Update documentation of
5209 field "referenced_type" to be more general. New field
5210 "offset_info" in union data field.
5211 * dwarf2loc.c (dwarf2_evaluate_property): Replace "address"
5212 parameter by "addr_stack" parameter. Adjust code accordingly.
5213 Add support for PROP_ADDR_OFFSET properties.
5214 * dwarf2read.c (attr_to_dynamic_prop): Add support for
5215 DW_AT_data_member_location attributes as well. Use case
5216 statements instead of if/else condition.
5218 2015-01-29 Joel Brobecker <brobecker@adacore.com>
5220 * ada-varobj.c (ada_varobj_get_array_number_of_children):
5221 Return zero if PARENT_VALUE is NULL and parent_type's
5222 range type is dynamic.
5224 2015-01-29 Joel Brobecker <brobecker@adacore.com>
5226 * gdbtypes.c (is_dynamic_type_internal) <TYPE_CODE_RANGE>: Return
5227 nonzero if the type's subtype is dynamic.
5228 (resolve_dynamic_range): Also resolve the range's subtype.
5230 2015-01-29 Alexander Klimov <alserkli@inbox.ru> (tiny patch)
5232 Pushed by Joel Brobecker <brobecker@adacore.com>.
5233 * symfile.c (unmap_overlay_command): Initialize sec to NULL.
5235 2015-01-27 Doug Evans <dje@google.com>
5237 * NEWS: Mention gdb.Objfile.username.
5238 * python/py-objfile.c (objfpy_get_username): New function.
5239 (objfile_getset): Add "username".
5241 2015-01-24 Mark Wielaard <mjw@redhat.com>
5243 * stack.c (return_command): Markup warning message with _.
5245 2015-01-24 Doug Evans <xdje42@gmail.com>
5247 * gdbtypes.h (TYPE_TYPE_SPECIFIC): Delete.
5249 2015-01-24 Jan Kratochvil <jan.kratochvil@redhat.com>
5251 Fix 100x slowdown regression on DWZ files.
5252 * dwarf2read.c (struct dwarf2_per_objfile): Add line_header_hash.
5253 (struct line_header): Add offset and offset_in_dwz.
5254 (dwarf_decode_lines): Add parameter decode_mapping to the declaration.
5255 (free_line_header_voidp): New declaration.
5256 (line_header_hash, line_header_hash_voidp, line_header_eq_voidp): New
5258 (dwarf2_build_include_psymtabs): Update dwarf_decode_lines caller.
5259 (handle_DW_AT_stmt_list): Use line_header_hash.
5260 (free_line_header_voidp): New function.
5261 (dwarf_decode_line_header): Initialize offset and offset_in_dwz.
5262 (dwarf_decode_lines): New parameter decode_mapping, use it.
5263 (dwarf2_free_objfile): Free line_header_hash.
5265 2015-01-23 Simon Marchi <simon.marchi@ericsson.com>
5268 * valops.c (value_rtti_indirect_type): Catch exception thrown by
5271 2015-01-15 Mark Wielaard <mjw@redhat.com>
5273 * dwarf2read.c (read_subroutine_type): Set TYPE_NO_RETURN from
5275 * gdbtypes.h (struct func_type): Add is_noreturn field flag. Make
5276 calling_convention an 8 bit bit field.
5277 (TYPE_NO_RETURN): New macro.
5278 * infcmd.c (finish_command): Query if function does not return
5280 * stack.c (return_command): Likewise.
5282 2015-01-23 Pedro Alves <palves@redhat.com>
5284 * linux-nat.c (linux_is_async_p): New macro.
5285 (linux_nat_is_async_p):
5286 (linux_nat_terminal_inferior): Check whether the target can async
5287 instead of whether it is already async.
5288 (linux_nat_terminal_ours): Don't check whether the target is
5290 (linux_async_pipe): Use linux_is_async_p.
5292 2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
5294 * NEWS (Changes since GDB 7.9): Add 'thread apply all' option
5296 * thread.c (tp_array_compar_ascending, tp_array_compar): New.
5297 (thread_apply_all_command): Parse CMD for tp_array_compar_ascending.
5298 Sort tp_array using tp_array_compar.
5299 (_initialize_thread): Extend thread_apply_all_command help.
5301 2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
5303 * corelow.c (core_open): Call also thread_command.
5304 * gdbthread.h (thread_command): New prototype moved from ...
5305 * thread.c (thread_command): ... here.
5306 (thread_command): Make it global.
5308 2015-01-22 Pedro Alves <palves@redhat.com>
5310 * configure.ac [*mingw32*]: Check $curses_found instead of
5312 * configure: Regenerate.
5313 * windows-termcap.c: Remove HAVE_CURSES_H, HAVE_NCURSES_H and
5314 HAVE_NCURSES_NCURSES_H checks.
5316 2015-01-22 Eli Zaretskii <eliz@gnu.org>
5318 * tui/tui.c (tui_enable) [__MINGW32__]: If the call to 'newterm'
5319 fails with the 1st arg NULL, try again with "unknown". Don't test
5320 the "cup" capability: it isn't supported by the Windows port of
5321 ncurses, but the Windows console driver is still capable of
5324 2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
5326 * compile/compile.c (_initialize_compile): Use -fPIE for compile_args.
5328 2015-01-22 Eli Zaretskii <eliz@gnu.org>
5330 * Makefile.in (HFILES_NO_SRCDIR): Remove ada-varobj.h.
5331 (ALLDEPFILES): Remove irix5-nat.c. These two are part of the
5332 reason that "make TAGS" is broken.
5334 2015-01-22 Chen Gang <gang.chen.5i5j@gmail.com>
5336 * hppa-tdep.c (inst_saves_gr): Fix logical working flow issues
5337 and check additional store instructions.
5339 2015-01-21 Wei-cheng Wang <cole945@gmail.com>
5341 * MAINTAINERS (Write After Approval): Add "Wei-cheng Wang".
5343 2015-01-21 Wei-cheng Wang <cole945@gmail.com>
5345 * ppc-linux-tdep.c (ppc_skip_trampoline_code,
5346 ppc_canonicalize_syscall, ppc_linux_syscall_record,
5347 ppc_linux_record_signal, ppc_init_linux_record_tdep): Add comments.
5348 * ppc64-tdep.c (ppc64_skip_trampoline_code): Likewise.
5349 * rs6000-tdep.c (rs6000_epilogue_frame_cache,
5350 rs6000_epilogue_frame_this_id, rs6000_epilogue_frame_prev_register,
5351 rs6000_epilogue_frame_sniffer, ppc_record_vsr, ppc_process_record_op4,
5352 ppc_process_record_op19, ppc_process_record_op31,
5353 ppc_process_record_op59, ppc_process_record_op60,
5354 ppc_process_record_op63): Likewise.
5356 2015-01-20 Joel Brobecker <brobecker@adacore.com>
5358 * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason_string)
5359 (linux_ptrace_test_ret_to_nx): Use safe_strerror instead of
5362 2015-01-20 Wei-cheng Wang <cole945@gmail.com>
5364 * rs6000-tdep.c (ppc_process_record_op4, ppc_process_record_op19,
5365 ppc_process_record_op31, ppc_process_record_op59,
5366 ppc_process_record_op60, ppc_process_record_op63,
5367 ppc_process_record): Fix -Wformat warning.
5368 * rs6000-tdep.c (rs6000_epilogue_frame_cache, ppc_process_record_op60):
5369 Remove unused variables.
5371 2015-01-20 Chen Gang <gang.chen.5i5j@gmail.com>
5373 * MAINTAINERS (Write After Approval): Add "Chen Gang".
5375 2015-01-19 Eli Zaretskii <eliz@gnu.org>
5377 * configure.ac [*mingw32*]: Only add windows-termcap.o to
5378 CONFIG_OBS if not building with a curses library.
5379 * configure: Regenerate.
5381 * windows-termcap.c: Include defs.h. Make the whole body empty if
5382 either one of HAVE_CURSES_H or HAVE_NCURSES_H or
5383 HAVE_NCURSES_NCURSES_H is defined.
5385 2015-01-19 Joel Brobecker <brobecker@adacore.com>
5387 * rs6000-tdep.c (rs6000_gdbarch_init): Move divide operator
5388 from end of line to start of next line.
5390 2015-01-17 Wei-cheng Wang <cole945@gmail.com>
5392 * ppc-linux-tdep.c (ppc_skip_trampoline_code):
5393 Scan PLT stub backward for reverse debugging.
5394 * ppc64-tdep.c (ppc64_skip_trampoline_code): Likewise.
5396 2015-01-17 Wei-cheng Wang <cole945@gmail.com>
5397 Ulrich Weigand <uweigand@de.ibm.com>
5399 * configure.tgt (powerpc*-*-linux): Add linux-record.o to
5401 (ppc_linux_record_tdep, ppc64_linux_record_tdep): New for linux syscall
5403 (ppc_canonicalize_syscall, ppc_linux_syscall_record,
5404 ppc_linux_record_signal, ppc_init_linux_record_tdep): New functions.
5405 (ppc_linux_init_abi): Set process_record, process_record_signal.
5406 * ppc-tdep.h (struct gdbarch_tdep): Add ppc_syscall_record and
5407 ppc_linux_record_tdep to gdbarch_tdep.
5408 (ppc_process_record): New declaration.
5409 * rs6000-tdep.c (ppc_record_vsr, ppc_process_record_op4,
5410 ppc_process_record_op19, ppc_process_record_op31,
5411 ppc_process_record_op59, ppc_process_record_op60,
5412 ppc_process_record_op63, ppc_process_record): New functions.
5414 2015-01-17 Wei-cheng Wang <cole945@gmail.com>
5416 * rs6000-tdep.c (rs6000_in_function_epilogue_p): Rename to
5417 rs6000_in_function_epilogue_frame_p and add an argument
5419 (rs6000_epilogue_frame_cache, rs6000_epilogue_frame_this_id,
5420 rs6000_epilogue_frame_prev_register, rs6000_epilogue_frame_sniffer):
5422 (rs6000_epilogue_frame_unwind): New.
5423 (rs6000_gdbarch_init): Append epilogue unwinder.
5425 2015-01-16 Sergio Durigan Junior <sergiodj@redhat.com>
5427 * nat/linux-personality.c: Replace "#ifndef
5428 HAVE_DECL_ADDR_NO_RANDOMIZE" by "#if
5429 !HAVE_DECL_ADDR_NO_RANDOMIZE", fixing a regression in RHEL-5
5432 2015-01-16 Eli Zaretskii <eliz@gnu.org>
5434 * tui/tui-win.c (tui_rehighlight_all, tui_set_var_cmd): New
5436 (_initialize_tui_win) <border-kind, border-mode>:
5437 <active-border-mode>: Use tui_set_var_cmd as the "set" function.
5438 (tui_set_tab_width_command): Fix the commentary.
5440 * tui/tui-win.h: Add prototype for tui_rehighlight_all.
5442 * tui/tui-win.c (tui_scroll_left_command, tui_scroll_right_command):
5444 (tui_set_tab_width_command): Delete and recreate the source and
5445 the disassembly windows, to show the effect of the changed tab
5448 * tui/tui-data.h (LINE_PREFIX): Make shorter
5449 (MAX_PID_WIDTH): Enlarge from 14 to 19, to leave enough space for
5450 "Thread NNNNN.XXXX" thread ID notation on Windows.
5452 2015-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
5454 Fix gcc-5 compilation.
5455 * hppa-tdep.c (inst_saves_gr): Fix parentheses typo.
5457 2015-01-15 Sergio Durigan Junior <sergiodj@redhat.com>
5459 * Makefile.in (HFILES_NO_SRCDIR): Add nat/linux-personality.h.
5460 (linux-personality.o): New rule.
5461 * common/common-defs.h: Include <stdint.h>.
5462 * config/aarch64/linux.mh (NATDEPFILES): Include
5463 linux-personality.o.
5464 * config/alpha/alpha-linux.mh (NATDEPFILES): Likewise.
5465 * config/arm/linux.mh (NATDEPFILES): Likewise.
5466 * config/i386/linux64.mh (NATDEPFILES): Likewise.
5467 * config/i386/linux.mh (NATDEPFILES): Likewise.
5468 * config/ia64/linux.mh (NATDEPFILES): Likewise.
5469 * config/m32r/linux.mh (NATDEPFILES): Likewise.
5470 * config/m68k/linux.mh (NATDEPFILES): Likewise.
5471 * config/mips/linux.mh (NATDEPFILES): Likewise.
5472 * config/pa/linux.mh (NATDEPFILES): Likewise.
5473 * config/powerpc/linux.mh (NATDEPFILES): Likewise.
5474 * config/powerpc/ppc64-linux.mh (NATDEPFILES): Likewise.
5475 * config/powerpc/spu-linux.mh (NATDEPFILES): Likewise.
5476 * config/s390/linux.mh (NATDEPFILES): Likewise.
5477 * config/sparc/linux64.mh (NATDEPFILES): Likewise.
5478 * config/sparc/linux.mh (NATDEPFILES): Likewise.
5479 * config/tilegx/linux.mh (NATDEPFILES): Likewise.
5480 * config/xtensa/linux.mh (NATDEPFILES): Likewise.
5481 * defs.h: Remove #include <stdint.h> (moved to
5482 common/common-defs.h).
5483 * linux-nat.c: Include nat/linux-personality.h. Remove #include
5484 <sys/personality.h>; do not define ADDR_NO_RANDOMIZE (moved to
5485 nat/linux-personality.c).
5486 (linux_nat_create_inferior): Remove code to disable address space
5487 randomization (moved to nat/linux-personality.c). Create cleanup
5488 to disable address space randomization.
5489 * nat/linux-personality.c: New file.
5490 * nat/linux-personality.h: Likewise.
5492 2015-01-15 Sergio Durigan Junior <sergiodj@redhat.com>
5494 * Makefile.in (ALLDEPFILES): Including common/mingw-strerror.c and
5495 common/posix-strerror.c.
5496 (posix-strerror.o): New rule.
5497 (mingw-strerror.o): Likewise.
5498 * common/common-utils.h (safe_strerror): Move prototype to here,
5500 * common/common.host: New file.
5501 * common/mingw-strerror.c: Likewise.
5502 * common/posix-strerror.c: Likewise.
5503 * configure: Regenerated.
5504 * configure.ac: Source common/common.host. Add variable
5505 common_host_obs to gdb_host_obs.
5506 * contrib/ari/gdb_ari.sh: Mention gdb/common/mingw-strerror.c and
5507 gdb/common/posix-strerror.c when warning about the use of
5509 * mingw-hdep.c (safe_strerror): Remove definition; move it to
5510 common/mingw-strerror.c.
5511 * posix-hdep.c (safe_strerror): Remove definition; move it to
5512 common/posix-hdep.c.
5513 * utils.h (safe_strerror): Remove prototype; move to
5514 common/common-utils.h.
5516 2015-01-15 Joel Brobecker <brobecker@adacore.com>
5520 2015-01-15 Joel Brobecker <brobecker@adacore.com>
5522 * ada-lang.c (ada_array_bound_from_type): Ignore array's parallel
5523 ___XA type if the array has already been fixed.
5525 2015-01-14 Yao Qi <yao@codesourcery.com>
5527 * Makefile.in (ppc-linux.o): New rule.
5528 * config/powerpc/ppc64-linux.mh (NATDEPFILES): Add ppc-linux.o.
5529 * configure.ac: AC_CHECK_FUNCS(getauxval).
5530 * config.in: Re-generated.
5531 * configure: Re-generated.
5532 * nat/ppc-linux.h [__powerpc64__] (ppc64_64bit_inferior_p):
5534 * nat/ppc-linux.c: New file.
5535 * ppc-linux-nat.c (ppc_linux_target_wordsize) [__powerpc64__]:
5536 Call ppc64_64bit_inferior_p.
5538 2015-01-14 Yao Qi <yao@codesourcery.com>
5540 * ppc-linux-nat.c (PT_ORIG_R3, PT_TRAP): Move to
5542 (PPC_FEATURE_CELL, PPC_FEATURE_BOOKE): Likewise.
5543 (PPC_FEATURE_HAS_DFP): Likewise.
5544 (PTRACE_GETVRREGS, PTRACE_SETVRREGS): Likewise.
5545 (PTRACE_GETVSXREGS, PTRACE_SETVSXREGS): Likewise.
5546 (PTRACE_GETEVRREGS, PTRACE_SETEVRREGS): Likewise.
5547 Include "nat/ppc-linux.h".
5548 * nat/ppc-linux.h: New file.
5549 * Makefile.in (HFILES_NO_SRCDIR): Add nat/ppc-linux.h.
5551 2015-01-14 Pedro Alves <palves@redhat.com>
5554 * breakpoint.c: Include "interps.h".
5555 (bpstat_do_actions_1): Also check whether the interpreter is
5558 2015-01-14 Pedro Alves <palves@redhat.com>
5561 * infrun.c (reinstall_readline_callback_handler_cleanup): Don't
5562 reinstall if the interpreter is sync.
5564 2015-01-13 Doug Evans <dje@google.com>
5566 * objfiles.c (objfile_filename): New function.
5567 * objfiles.h (objfile_filename): Declare it.
5568 (objfile_name): Add function comment.
5569 * python/py-objfile.c (objfpy_lookup_objfile_by_name): Try both the
5570 bfd file name (which may be realpath'd), and the original name.
5572 2015-01-13 Joel Brobecker <brobecker@adacore.com>
5574 * NEWS: Create a new section for the next release branch.
5575 Rename the section of the current branch, now that it has
5578 2015-01-13 Joel Brobecker <brobecker@adacore.com>
5580 GDB 7.9 branch created (92fc2e6978d9a7c8324c7e851dbee59e22ec7a37):
5581 * version.in: Bump version to 7.9.50.DATE-cvs.
5583 2015-01-13 Joel Brobecker <brobecker@adacore.com>
5585 * nat/linux-procfs.c (linux_proc_attach_tgid_threads):
5586 Remove trailing new-line in argument of call to warning.
5588 2015-01-13 Joel Brobecker <brobecker@adacore.com>
5590 * linux-nat.c (attach_proc_task_lwp_callback): Remove trailing
5591 new-line in argument of call to "warning".
5593 2015-01-13 Joel Brobecker <brobecker@adacore.com>
5595 * ada-lang.c (ada_lookup_symbol_nonlocal): If name not found
5596 in static block, then try searching for primitive types.
5598 2015-01-12 Patrick Palka <patrick@parcs.ath.cx>
5600 * top.h (gdb_add_history): Declare.
5601 * top.c (command_count): New variable.
5602 (gdb_add_history): New function.
5603 (gdb_safe_append_history): New static function.
5604 (quit_force): Call it.
5605 (command_line_input): Use gdb_add_history instead of
5607 * event-top.c (command_line_handler): Likewise.
5609 2015-01-12 James Clarke <jrtc27@jrtc27.com> (tiny patch)
5612 * darwin-nat.c: Replace <machine/setjmp.h> #include by
5613 <setjmp.h> #include.
5615 2015-01-11 Doug Evans <xdje42@gmail.com>
5617 * dwarf2read.c (compute_delayed_physnames): Use TYPE_FN_FIELD_PHYSNAME.
5619 2015-01-11 Doug Evans <xdje42@gmail.com>
5622 * NEWS: The "maint demangle" command is renamed as "demangle".
5623 * demangle.c: #include cli/cli-utils.h, language.h.
5624 (demangle_command): New function.
5625 (_initialize_demangle): Add new command "demangle".
5626 * maint.c (maintenance_demangle): Stub out.
5627 (_initialize_maint_cmds): Update help text for "maint demangle",
5628 and mark as deprecated.
5630 2015-01-11 Mark Kettenis <kettenis@gnu.org>
5632 * inf-ptrace.c (inf_ptrace_follow_fork): Adjust now that
5633 inferior_thread is a function.
5635 2015-01-09 Patrick Palka <patrick@parcs.ath.cx>
5637 * Makefile.in (.y.c): Don't munge yacc's #line
5640 2015-01-09 Patrick Palka <patrick@parcs.ath.cx>
5642 * utils.c (defaulted_query): Rewrite to use gdb_readline_wrapper
5643 to prompt for input.
5644 * tui/tui-hooks.c (tui_query_hook): Remove.
5645 (tui_install_hooks): Don't set deprecated_query_hook.
5646 * tui/tui-io.c (tui_redisplay_readline): Fix off-by-one error in
5647 height calculation. Always update the command window's cur_line.
5649 2015-01-09 Pedro Alves <palves@redhat.com>
5651 * breakpoint.c (hardware_breakpoint_inserted_here_p): New
5653 * breakpoint.h (hardware_breakpoint_inserted_here_p): New
5655 * linux-nat.c (linux_nat_status_is_event): Move higher up in file.
5656 (linux_resume_one_lwp): Store the thread's PC. Adjust to clear
5658 (check_stopped_by_watchpoint): New function.
5659 (save_sigtrap): Reimplement.
5660 (linux_nat_stopped_by_watchpoint): Adjust.
5661 (linux_nat_lp_status_is_event): Delete.
5662 (stop_wait_callback): Only call save_sigtrap after storing the
5664 (status_callback): If the thread had been stopped for a breakpoint
5665 that has since been removed, discard the event and resume the LWP.
5666 (count_events_callback, select_event_lwp_callback): Use
5667 lwp_status_pending_p instead of linux_nat_lp_status_is_event.
5668 (cancel_breakpoint): Rename to ...
5669 (check_stopped_by_breakpoint): ... this. Record whether the LWP
5670 stopped for a software breakpoint or hardware breakpoint.
5671 (select_event_lwp): Only give preference to the stepping LWP in
5672 all-stop mode. Adjust comments.
5673 (stop_and_resume_callback): Remove references to new_pending_p.
5674 (linux_nat_filter_event): Likewise. Leave exit events of the
5675 leader thread pending here. Handle signal short circuiting here.
5676 Only call save_sigtrap after storing the pending waitstatus.
5677 (linux_nat_wait_1): Remove 'retry' label. Remove references to
5678 new_pending. Don't handle leaving events the caller is not
5679 interested in pending here, nor handle signal short-circuiting
5680 here. Also give equal priority to all LWPs that have had events
5681 in non-stop mode. If reporting a software breakpoint event,
5682 unadjust the LWP's PC.
5683 * linux-nat.h (enum lwp_stop_reason): New.
5684 (struct lwp_info) <stop_pc>: New field.
5685 (struct lwp_info) <stopped_by_watchpoint>: Delete field.
5686 (struct lwp_info) <stop_reason>: New field.
5687 * x86-linux-nat.c (x86_linux_prepare_to_resume): Adjust.
5689 2015-01-09 Pedro Alves <palves@redhat.com>
5691 * linux-nat.c (linux_handle_extended_wait) <PTRACE_EVENT_EXEC>:
5692 Set the LWP's 'resumed' flag.
5694 2015-01-09 Pedro Alves <palves@redhat.com>
5696 * linux-nat.c (linux_resume_one_lwp): New function.
5697 (resume_lwp): Use lwp_status_pending_p and linux_resume_one_lwp.
5698 (linux_nat_resume): Use lwp_status_pending_p and
5699 linux_resume_one_lwp.
5700 (linux_handle_syscall_trap): Use linux_resume_one_lwp.
5701 (linux_handle_extended_wait): Use linux_resume_one_lwp.
5702 (status_callback, running_callback): Use lwp_status_pending_p.
5703 (lwp_status_pending_p): New function.
5704 (stop_and_resume_callback): Use lwp_status_pending_p.
5705 (linux_nat_filter_event): Use linux_resume_one_lwp.
5706 (linux_nat_wait_1): Always use status_callback to look for an LWP
5707 with a pending status. Use linux_resume_one_lwp.
5708 (resume_stopped_resumed_lwps): Use lwp_status_pending_p and
5709 linux_resume_one_lwp.
5711 2015-01-09 Pedro Alves <palves@redhat.com>
5713 * breakpoint.c (bp_location_inserted_here_p): New function,
5714 factored out from ...
5715 (breakpoint_inserted_here_p): ... here. Use
5716 ALL_BP_LOCATIONS_AT_ADDR.
5717 (software_breakpoint_inserted_here_p): Use
5718 bp_location_inserted_here_p and ALL_BP_LOCATIONS_AT_ADDR.
5720 2014-01-09 Pedro Alves <palves@redhat.com>
5722 Skip enabling event reporting if the kernel supports
5724 * linux-thread-db.c: Include "nat/linux-ptrace.h".
5725 (thread_db_use_events): New function.
5726 (try_thread_db_load_1): Check thread_db_use_events before enabling
5728 (update_thread_state): New function.
5729 (attach_thread): Use it. Check thread_db_use_events before
5730 enabling event reporting.
5731 (thread_db_detach): Check thread_db_use_events before disabling
5733 (find_new_threads_callback): Check thread_db_use_events before
5734 enabling event reporting. Update the thread's state if not using
5735 libthread_db events.
5737 2015-01-09 Pedro Alves <palves@redhat.com>
5739 * linux-nat.c (lin_lwp_attach_lwp): Assert that the lwp id we're
5740 about to wait for is > 0.
5741 * linux-thread-db.c (find_new_threads_callback): Ignore thread if
5742 the kernel thread ID is -1.
5744 2015-01-09 Pedro Alves <palves@redhat.com>
5746 * linux-nat.c (attach_proc_task_lwp_callback): New function.
5747 (linux_nat_attach): Use linux_proc_attach_tgid_threads.
5748 (wait_lwp, linux_nat_filter_event): If not set yet, set the lwp's
5749 ptrace option flags.
5750 * linux-nat.h (struct lwp_info) <must_set_ptrace_flags>: New
5752 * nat/linux-procfs.c: Include <dirent.h>.
5753 (linux_proc_get_int): New parameter "warn". Handle it.
5754 (linux_proc_get_tgid): Adjust.
5755 (linux_proc_get_tracerpid): Rename to ...
5756 (linux_proc_get_tracerpid_nowarn): ... this.
5757 (linux_proc_pid_get_state): New function, factored out from
5758 (linux_proc_pid_has_state): ... this. Add new parameter "warn"
5760 (linux_proc_pid_is_gone): New function.
5761 (linux_proc_pid_is_stopped): Adjust.
5762 (linux_proc_pid_is_zombie_maybe_warn)
5763 (linux_proc_pid_is_zombie_nowarn): New functions.
5764 (linux_proc_pid_is_zombie): Use
5765 linux_proc_pid_is_zombie_maybe_warn.
5766 (linux_proc_attach_tgid_threads): New function.
5767 * nat/linux-procfs.h (linux_proc_get_tgid): Update comment.
5768 (linux_proc_get_tracerpid): Rename to ...
5769 (linux_proc_get_tracerpid_nowarn): ... this, and update comment.
5770 (linux_proc_pid_is_gone): New declaration.
5771 (linux_proc_pid_is_zombie): Update comment.
5772 (linux_proc_pid_is_zombie_nowarn): New declaration.
5773 (linux_proc_attach_lwp_func): New typedef.
5774 (linux_proc_attach_tgid_threads): New declaration.
5775 * nat/linux-ptrace.c (linux_ptrace_attach_fail_reason): Adjust to
5776 use nowarn functions.
5777 (linux_ptrace_attach_fail_reason_string): Move here from
5778 gdbserver/linux-low.c and rename.
5779 (ptrace_supports_feature): If the current ptrace options are not
5780 known yet, check them now, instead of asserting.
5781 * nat/linux-ptrace.h (linux_ptrace_attach_fail_reason_string):
5784 2015-01-09 Pedro Alves <palves@redhat.com>
5786 * linux-thread-db.c (thread_db_find_new_threads_silently)
5787 (try_thread_db_load_1, try_thread_db_load, thread_db_load_search)
5788 (find_new_threads_once): Print debug output on gdb_stdlog.
5790 2015-01-09 Chen Gang <gang.chen.5i5j@gmail.com>
5791 Pedro Alves <palves@redhat.com>
5793 * compile/compile.c: Include "gdb_wait.h".
5794 (do_rmdir): Check return value, and free 'zap'.
5796 2015-01-08 Pedro Alves <palves@redhat.com>
5797 Yao Qi <yao@codesourcery.com>
5799 * dwarf2loc.c (indirect_pieced_value): Don't call
5800 gdb_sign_extend. Call extract_signed_integer instead.
5801 * utils.c (gdb_sign_extend): Remove.
5802 * utils.h (gdb_sign_extend): Remove declaration.
5804 2015-01-07 Pierre Muller <muller@sourceware.org>
5807 * stabsread.c (define_symbol): Set language for C++ special symbols.
5809 2015-01-07 Patrick Palka <patrick@parcs.ath.cx>
5811 * inflow.c (initial_gdb_ttystate): Tweak comment.
5813 2015-01-07 Joel Brobecker <brobecker@adacore.com>
5815 * inflow.c (set_initial_gdb_ttystate): Add empty line after
5816 comment documenting function.
5818 2015-01-07 Patrick Palka <patrick@parcs.ath.cx>
5820 * terminal.h (set_initial_gdb_ttystate): Declare.
5821 * inflow.c (initial_gdb_ttystate): New static variable.
5822 (set_initial_gdb_ttystate): New setter.
5823 (child_terminal_init_with_pgrp): Copy initial_gdb_ttystate
5824 instead of our current terminal state.
5825 * top.c (gdb_init): Call set_initial_gdb_ttystate.
5827 2015-01-07 Joel Brobecker <brobecker@adacore.com>
5829 * guile/scm-type.c (tyscm_array_1): Add comment.
5830 * python/py-type.c (typy_array_1): Add comment.
5832 2015-01-06 Joel Brobecker <brobecker@adacore.com>
5834 * guile/scm-type.c (tyscm_array_1): Do not raise out-of-range
5835 error if N2 is equal to N1 - 1.
5837 2015-01-06 Joel Brobecker <brobecker@adacore.com>
5839 * python/py-type.c (typy_array_1): Do not raise negative-length
5840 exception if N2 is equal to N1 - 1.
5842 2015-01-03 Doug Evans <xdje42@gmail.com>
5844 * c-exp.y: Whitespace cleanup.
5845 (classify_inner_name): Remove extra ;.
5847 2015-01-02 Maciej W. Rozycki <macro@codesourcery.com>
5849 * mips-tdep.c (mips32_scan_prologue): Keep the extracted stack
5852 2015-01-02 Doug Evans <dje@google.com>
5854 * dwarf2read.c (setup_type_unit_groups): Remove outdated comment.
5856 2015-01-02 Doug Evans <dje@google.com>
5858 * symtab.h (struct symbol): Fix typo in comment.
5860 2015-01-01 Joel Brobecker <brobecker@adacore.com>
5862 Update year range in copyright notice of all files.
5864 2015-01-01 Joel Brobecker <brobecker@adacore.com>
5866 * top.c (print_gdb_version): Update copyright year to 2015.
5868 2015-01-01 Joel Brobecker <brobecker@adacore.com>
5870 * config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2014.
5872 For older changes see ChangeLog-2014.
5878 version-control: never