gdb/ChangeLog

   1 2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>
   2
   3         * ppc-sysv-tdep.c (ppc64_sysv_abi_push_freg): Use correct order
   4         within a register pair holding a DFP 128-bit value on little-endian.
   5         (ppc64_sysv_abi_return_value_base): Likewise.
   6         * rs6000-tdep.c (dfp_pseudo_register_read): Likewise.
   7         (dfp_pseudo_register_write): Likewise.
   8
   9 2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>
  10
  11         * ppc-sysv-tdep.c (ppc64_sysv_abi_push_freg): Use correct
  12         offset on little-endian when passing _Decimal32.
  13         (ppc64_sysv_abi_return_value_base): Likewise for return values.
  14
  15 2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>
  16
  17         * rs6000-tdep.c (efpr_pseudo_register_read): Use correct offset
  18         of the overlapped FP register within the VSX register on little-
  19         endian platforms.
  20         (efpr_pseudo_register_write): Likewise.
  21
  22 2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>
  23
  24         * ppc-sysv-tdep.c (ppc64_sysv_abi_push_val): Use correct
  25         offset on little-endian when passing small structures.
  26
  27 2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>
  28
  29         * ppc-sysv-tdep.c (get_decimal_float_return_value): Update comment.
  30         (struct ppc64_sysv_argpos): New data structure.
  31         (ppc64_sysv_abi_push_float): Remove.
  32         (ppc64_sysv_abi_push_val): New function.
  33         (ppc64_sysv_abi_push_integer): Likewise.
  34         (ppc64_sysv_abi_push_freg): Likewise.
  35         (ppc64_sysv_abi_push_vreg): Likewise.
  36         (ppc64_sysv_abi_push_param): Likewise.
  37         (ppc64_sysv_abi_push_dummy_call): Refactor to use those new routines.
  38         (ppc64_sysv_abi_return_value_base): New function.
  39         (ppc64_sysv_abi_return_value): Refactor to use it.
  40
  41 2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>
  42
  43         * NEWS: Document new target powerpc64le-*-linux*.
  44
  45 2014-02-04  Mark Kettenis  <kettenis@gnu.org>
  46
  47         * sparc64obsd-tdep.c (sparc64obsd_gregset): New variable.
  48         (sparc64obsd_supply_gregset): Handle registers sets used in ELF
  49         core dumps.
  50         (sparc64obsd_init_abi): Adjust minimum size of the general purpose
  51         register set used in ELF core dumps.  Add floating-point register set.
  52
  53 2014-02-03  Kevin Buettner  <kevinb@redhat.com>
  54
  55         * mn10300-tdep.c (mn10300_dwarf2_reg_to_regnum): Rewrite
  56         dwarf2_to_gdb[] table using symbolic constants.  Adjust
  57         penultimate entry from number representing the PC register
  58         to symbolic constant representing the MDR register.  Add
  59         constant for the PC register to the end of the table.
  60
  61 2014-02-03  Mark Kettenis  <kettenis@gnu.org>
  62
  63         * bsd-kvm.c: Include <sys/param.h>
  64
  65 2014-02-03  Mark Kettenis  <kettenis@gnu.org>
  66
  67         * sparc64nbsd-nat.c (sparc64nbsd_supply_fpregset): Fix prototype.
  68
  69 2014-01-31  Joel Brobecker  <brobecker@adacore.com>
  70
  71         * ada-lang.h (clear_ada_sym_cache): Delete.
  72
  73 2014-01-30  Ulrich Weigand  <uweigand@de.ibm.com>
  74
  75         * auxv.c (fprint_target_auxv): Handle AT_HWCAP2.
  76
  77 2014-01-29  Jose E. Marchesi  <jose.marchesi@oracle.com>
  78
  79         * sparc64-linux-tdep.c (sparc64_linux_step_trap): Get PC from
  80           the sigreturn register save area only if the syscall is
  81           sigreturn.
  82
  83 2014-01-29  Joel Brobecker  <brobecker@adacore.com>
  84
  85         * valops.c (value_slice): Minor reformatting.
  86
  87 2014-01-28  Ulrich Weigand  <uweigand@de.ibm.com>
  88
  89         * ppc64-tdep.c (ppc64_standard_linkage7): Fix typo.
  90
  91 2014-01-28  Joel Brobecker  <brobecker@adacore.com>
  92
  93         * ada-lang.c (maint_set_ada_cmdlist, maint_show_ada_cmdlist):
  94         New static globals.
  95         (maint_set_ada_cmd, maint_show_ada_cmd): New functions.
  96         (ada_ignore_descriptive_types_p): New static global.
  97         (find_parallel_type_by_descriptive_type): Return immediately
  98         if ada_ignore_descriptive_types_p is set.
  99         (_initialize_ada_language): Register new commands "maintenance
 100         set ada", "maintenance show ada", "maintenance set ada
 101         ignore-descriptive-types" and "maintenance show ada
 102         ignore-descriptive-types".
 103         * NEWS: Add entry for new "maint ada set/show
 104         ignore-descriptive-types" commands.
 105
 106 2014-01-27  Markus Metzger  <markus.t.metzger@intel.com>
 107
 108         * record-btrace.c (record_btrace_close): Call btrace_teardown
 109         for all threads.
 110
 111 2014-01-27  Joel Brobecker  <brobecker@adacore.com>
 112
 113         * ada-lang.c: Remove "#ifdef UI_OUT" condition for including
 114         "ui-out.h".
 115
 116 2014-01-27  Joel Brobecker  <brobecker@adacore.com>
 117
 118         * ada-typeprint (type_is_full_subrange_of_target_type):
 119         New function.
 120         (print_range): Add parameter bounds_prefered_p.  If not set,
 121         try printing range types using the name of their base type.
 122         (print_range_type): Add parameter bounds_prefered_p.
 123         Use it in call to print_range.
 124         (print_array_type, ada_print_type): Update calls to print_range
 125         and print_range_type.
 126
 127 2014-01-27  Joel Brobecker  <brobecker@adacore.com>
 128
 129         * ada-typeprint.c (print_array_type, print_choices, print_range)
 130         (print_range_bound, print_dynamic_range_bound, print_range_type):
 131         Remove declaration.
 132
 133 2014-01-27  Joel Brobecker  <brobecker@adacore.com>
 134
 135         * ada-typeprint.c (print_range): Add missing empty line
 136         after local declaration.
 137
 138 2014-01-27  Joel Brobecker  <brobecker@adacore.com>
 139
 140         * ada-valprint.c (print_optional_low_bound): Get index_type's
 141         target type for as long as it is a TYPE_CODE_RANGE.
 142
 143 2014-01-27  Joel Brobecker  <brobecker@adacore.com>
 144
 145         * procfs.c (procfs_make_note_section): Remove assertion and
 146         associated comment.
 147
 148 2014-01-24  Yao Qi  <yao@codesourcery.com>
 149
 150         * remote.c (remote_read_bytes): Change type of len to ULONGEST.
 151         * corelow.c (get_core_siginfo): Likewise.
 152
 153 2014-01-24  Yao Qi  <yao@codesourcery.com>
 154
 155         * remote.c (remote_write_bytes_aux): Change type of 'len' to
 156         ULONGEST.  Don't check 'len' is negative.
 157         (remote_write_bytes):  Change type of 'len' to ULONGEST.
 158
 159 2014-01-23  Tom Tromey  <tromey@redhat.com>
 160
 161         PR python/16485:
 162         * python/lib/gdb/FrameDecorator.py: (FrameVars.fetch_frame_args):
 163         Handle exception from frame.block.
 164         (FrameVars.fetch_frame_locals): Likewise.
 165
 166 2014-01-23  Tom Tromey  <tromey@redhat.com>
 167
 168         PR python/16487:
 169         * python/py-framefilter.c (py_print_frame): Don't call Py_DECREF
 170         on a NULL pointer.  Move "goto error" to correct place.
 171
 172 2014-01-23  Tom Tromey  <tromey@redhat.com>
 173
 174         PR python/16491:
 175         * python/py-framefilter.c (apply_frame_filter): Call
 176         ensure_python_env after computing gdbarch.
 177
 178 2014-01-23  Yao Qi  <yao@codesourcery.com>
 179
 180         * target.c (raw_memory_xfer_partial): Change argument type
 181         from void * to gdb_byte *.
 182         (memory_xfer_partial_1, memory_xfer_partial): Likewise.
 183
 184 2014-01-22  Doug Evans  <dje@google.com>
 185
 186         New gdbserver option --debug-format=timestamp.
 187         * NEWS: Mention it.
 188
 189 2014-01-22  Andreas Arnez  <arnez@vnet.linux.ibm.com>
 190
 191         * syscalls/s390x-linux.xml: New file.
 192         * syscalls/s390-linux.xml: New file.
 193         * s390-linux-tdep.c (XML_SYSCALL_FILENAME_S390): New macro.
 194         (XML_SYSCALL_FILENAME_S390X): Likewise.
 195         (op_svc): New enum value for SVC opcode.
 196         (s390_sigtramp_frame_sniffer): Replace literal by 'op_svc'.
 197         (s390_linux_get_syscall_number): New function.
 198         (s390_gdbarch_init): Register '*get_syscall_number' and the
 199         syscall xml file name.
 200         * data-directory/Makefile.in (SYSCALLS_FILES): Add
 201         "s390-linux.xml" and "s390x-linux.xml".
 202         * NEWS: Announce new feature.
 203
 204 2014-01-22  Baruch Siach  <baruch@tkos.co.il>
 205
 206         * xtensa-tdep.h (xtensa_elf_greg_t): Change type to uint32_t.
 207
 208 2014-01-22  Pedro Alves  <palves@redhat.com>
 209
 210         * xtensa-config.c: Include defs.h.
 211
 212 2014-01-22  Joel Brobecker  <brobecker@adacore.com>
 213
 214         * common/common-utils.h: Add "ARI:" comment beside __func__
 215         reference.
 216
 217 2014-01-22  Joel Brobecker  <brobecker@adacore.com>
 218
 219         * common/common-utils.h (FUNCTION_NAME): Expand the macro's
 220         documentation a bit.
 221
 222 2014-01-21  Roland McGrath  <mcgrathr@google.com>
 223
 224         * configure.ac: Call AM_PROG_INSTALL_STRIP.
 225         * configure: Regenerate.
 226         * aclocal.m4: Regenerate.
 227         * Makefile.in (install_sh, INSTALL_STRIP_PROGRAM, STRIP):
 228         New substituted variables.
 229         (install-strip): New target.
 230         (INSTALL_SCRIPT): New substituted variable.
 231         (FLAGS_TO_PASS): Add it.
 232         (install-only): Use $(INSTALL_SCRIPT) rather than
 233         $(INSTALL_PROGRAM) for gcore.
 234
 235 2014-01-20  Tom Tromey  <tromey@redhat.com>
 236
 237         * cli/cli-decode.h (struct cmd_list_element): Move all bitfields
 238         together.
 239
 240 2014-01-20  Tom Tromey  <tromey@redhat.com>
 241
 242         * cli/cli-decode.c (add_cmd, deprecate_cmd, add_alias_cmd)
 243         (add_setshow_cmd_full, delete_cmd, lookup_cmd_1)
 244         (deprecated_cmd_warning, complete_on_cmdlist): Update.
 245         * cli/cli-decode.h (CMD_DEPRECATED, DEPRECATED_WARN_USER)
 246         (MALLOCED_REPLACEMENT, DOC_ALLOCATED): Remove.
 247         (struct cmd_list_element) <flags>: Remove.
 248         <cmd_deprecated, deprecated_warn_user, malloced_replacement,
 249         doc_allocated>: New fields.
 250         <hook_in, allow_unknown, abbrev_flag, type, var_type>: Now
 251         bitfields.
 252         * maint.c (maintenance_do_deprecate): Update.
 253         * top.c (execute_command): Update.
 254
 255 2014-01-20  Baruch Siach  <baruch@tkos.co.il>
 256
 257         * xtensa-linux-nat.c: Include asm/ptrace.h.
 258
 259 2014-01-17  Iain Buclaw  <ibuclaw@gdcproject.org>
 260
 261         * Makefile.in (SFILES): Add d-support.c.
 262         (COMMON_OBS): Add d-support.o.
 263         * d-lang.h (d_parse_symbol): Add comment, now defined in
 264         d-support.c.
 265         * d-lang.c (parse_call_convention)
 266         (parse_attributes, parse_function_types)
 267         (parse_function_args, parse_type, parse_identifier)
 268         (call_convention_p, d_parse_symbol): Move functions to ...
 269         * d-support.c: ... New file.
 270
 271 2014-01-17  Iain Buclaw  <ibuclaw@gdcproject.org>
 272
 273         * d-lang.h (d_parse_symbol): Add declaration.
 274         * d-lang.c (extract_identifiers)
 275         (extract_type_info): Remove functions.
 276         (parse_call_convention, parse_attributes)
 277         (parse_function_types, parse_function_args)
 278         (parse_type, parse_identifier, call_convention_p)
 279         (d_parse_symbol): New functions.
 280         (d_demangle): Use d_parse_symbol to demangle D symbols.
 281
 282 2014-01-17  Iain Buclaw  <ibuclaw@gdcproject.org>
 283
 284         * d-lang.h (struct builtin_d_type): New data type.
 285         (builtin_d_type): Add declaration.
 286         * d-lang.c (d_language_arch_info, build_d_types)
 287         (builtin_d_type): New functions.
 288         (enum d_primitive_types): New data type.
 289         (d_language_defn): Change c_language_arch_info to
 290         d_language_arch_info.
 291         (d_type_data): New static variable.
 292         (_initialize_d_language): Initialize d_type_data.
 293
 294 2014-01-17  Iain Buclaw  <ibuclaw@gdcproject.org>
 295
 296         * d-lang.h (d_main_name): Add declaration.
 297         * d-lang.c (d_main_name): New function.
 298         * symtab.c (find_main_name): Add call to d_main_name.
 299
 300 2014-01-17  Iain Buclaw  <ibuclaw@gdcproject.org>
 301
 302         * d-lang.c (d_language_defn): Change macro_expansion_c to
 303         macro_expansion_no.
 304
 305 2014-01-17  Iain Buclaw  <ibuclaw@gdcproject.org>
 306
 307         * MAINTAINERS: Add myself as a write-after-approval maintainer.
 308
 309 2014-01-17  Sergio Durigan Junior  <sergiodj@redhat.com>
 310
 311         * breakpoint.c (insert_bp_location): Add "volatile" keyword to "struct
 312         gdb_exception" declaration.
 313         * remote.c (getpkt_or_notif_sane): Likewise.
 314
 315 2014-01-17  Doug Evans  <dje@google.com>
 316
 317         * common/gdb_vecs.c (delim_string_to_char_ptr_vec_append): New
 318         function, contents of dirnames_to_char_ptr_vec_append moved here.
 319         (delim_string_to_char_ptr_vec): New function.
 320         (dirnames_to_char_ptr_vec_append): Rewrite.
 321         * common/gdb_vecs.h (delim_string_to_char_ptr_vec): Declare.
 322
 323 2014-01-17  Doug Evans  <dje@google.com>
 324
 325         * common/common-utils.h (FUNCTION_NAME): Renamed from ASSERT_FUNCTION,
 326         and moved here ...
 327         * common/gdb_assert.h (ASSERT_FUNCTION): ... from here.
 328         #include "common-utils.h".
 329         (gdb_assert, gdb_assert_fail, gdb_assert_not_reached): Update.
 330         * common/vec.h (VEC_ASSERT_PASS): Update.
 331         * darwin-nat.h: Replace #include of gdb_assert.h with common-utils.h.
 332         (MACH_CHECK_ERROR): Update.
 333
 334 2014-01-17  Simon Marchi  <simon.marchi@ericsson.com>
 335
 336         * gdbarch.sh (gdbarch_address_class_name_to_type_flags): Add
 337         comments.
 338         * gdbarch.h: Regenerate.
 339
 340 2014-01-16  Tom Tromey  <tromey@redhat.com>
 341
 342         * value.c (struct value) <regnum>: Move earlier.
 343
 344 2014-01-16  Tom Tromey  <tromey@redhat.com>
 345
 346         * remote.c (extended_remote_create_inferior): Rename from
 347         extended_remote_create_inferior_1.  Add "ops" argument.  Remove
 348         old implementation.
 349
 350 2014-01-16  Pedro Alves  <palves@redhat.com>
 351
 352         * s390-linux-tdep.c (s390_frame_unwind_cache): Swallow
 353         NOT_AVAILABLE_ERROR errors while parsing the prologue or reading
 354         the backchain.
 355
 356 2014-01-16  Doug Evans  <dje@google.com>
 357
 358         * dwarf2read.c (open_and_init_dwp_file): Fix typo in comment.
 359
 360 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 361
 362         * btrace.h (btrace_thread_flag): New.
 363         (struct btrace_thread_info) <flags>: New.
 364         * record-btrace.c (record_btrace_resume_thread)
 365         (record_btrace_find_thread_to_move, btrace_step_no_history)
 366         (btrace_step_stopped, record_btrace_start_replaying)
 367         (record_btrace_step_thread, record_btrace_decr_pc_after_break)
 368         (record_btrace_find_resume_thread): New.
 369         (record_btrace_resume, record_btrace_wait): Extend.
 370         (record_btrace_can_execute_reverse): New.
 371         (record_btrace_open): Fail in non-stop mode.
 372         (record_btrace_set_replay): Split into this, ...
 373         (record_btrace_stop_replaying): ... this, ...
 374         (record_btrace_clear_histories): ... and this.
 375         (init_record_btrace_ops): Init to_can_execute_reverse.
 376         * NEWS: Announce it.
 377
 378 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 379
 380         * target.h (struct target_ops) <to_decr_pc_after_break>: New.
 381         (forward_target_decr_pc_after_break)
 382         (target_decr_pc_after_break): New.
 383         * target.c (forward_target_decr_pc_after_break)
 384         (target_decr_pc_after_break): New.
 385         * aix-thread.c (aix_thread_wait): Call target_decr_pc_after_break
 386         instead of gdbarch_decr_pc_after_break.
 387         * darwin-nat.c (cancel_breakpoint): Call target_decr_pc_after_break
 388         instead of gdbarch_decr_pc_after_break.
 389         * infrun.c (adjust_pc_after_break): Call target_decr_pc_after_break
 390         instead of gdbarch_decr_pc_after_break.
 391         * linux-nat.c (cancel_breakpoint): Call target_decr_pc_after_break
 392         instead of gdbarch_decr_pc_after_break.
 393         * linux-thread-db.c (check_event): Call target_decr_pc_after_break
 394         instead of gdbarch_decr_pc_after_break.
 395         * record-full.c (record_full_wait_1): Call target_decr_pc_after_break
 396         instead of gdbarch_decr_pc_after_break.
 397
 398 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 399
 400         * btrace.c: Include regcache.h.
 401         (btrace_add_pc): New.
 402         (btrace_enable): Call btrace_add_pc.
 403         (btrace_is_empty): New.
 404         * btrace.h (btrace_is_empty): New.
 405         * record-btrace.c (require_btrace, record_btrace_info): Call
 406         btrace_is_empty.
 407
 408 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 409
 410         * common/linux-btrace.c (perf_event_read_bts, linux_read_btrace):
 411         Support delta reads.
 412         (linux_disable_btrace): Change return type.
 413         * common/linux-btrace.h (linux_read_btrace): Change parameters
 414         and return type to allow error reporting.  Update users.
 415         (linux_disable_btrace): Change return type.  Update users.
 416         * common/btrace-common.h (btrace_read_type) <BTRACE_READ_DELTA>:
 417         New.
 418         (btrace_error): New.
 419         (btrace_block) <begin>: Comment on BEGIN == 0.
 420         * btrace.c (btrace_compute_ftrace): Start from the end of
 421         the current trace.
 422         (btrace_stitch_trace, btrace_clear_history): New.
 423         (btrace_fetch): Read delta trace, return if replaying.
 424         (btrace_clear): Move clear history code to btrace_clear_history.
 425         (parse_xml_btrace): Throw an error if parsing failed.
 426         * target.h (struct target_ops) <to_read_btrace>: Change parameters
 427         and return type to allow error reporting.
 428         (target_read_btrace): Change parameters and return type to allow
 429         error reporting.
 430         * target.c (target_read_btrace): Update.
 431         * remote.c (remote_read_btrace): Support delta reads.  Pass
 432         errors on.
 433         * NEWS: Announce it.
 434
 435 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 436
 437         * record.h (record_btrace_frame_unwind)
 438         (record_btrace_tailcall_frame_unwind): New declarations.
 439         * dwarf2-frame: Include record.h
 440         (dwarf2_frame_cfa): Throw an error for btrace frames.
 441         * record-btrace.c: Include hashtab.h.
 442         (btrace_get_bfun_name): New.
 443         (btrace_call_history): Call btrace_get_bfun_name.
 444         (struct btrace_frame_cache): New.
 445         (bfcache): New.
 446         (bfcache_hash, bfcache_eq, bfcache_new): New.
 447         (btrace_get_frame_function): New.
 448         (record_btrace_frame_unwind_stop_reason): Allow unwinding.
 449         (record_btrace_frame_this_id): Compute own id.
 450         (record_btrace_frame_prev_register): Provide PC, throw_error
 451         for all other registers.
 452         (record_btrace_frame_sniffer): Detect btrace frames.
 453         (record_btrace_tailcall_frame_sniffer): New.
 454         (record_btrace_frame_dealloc_cache): New.
 455         (record_btrace_frame_unwind): Add new functions.
 456         (record_btrace_tailcall_frame_unwind): New.
 457         (_initialize_record_btrace): Allocate cache.
 458         * btrace.c (btrace_clear): Call reinit_frame_cache.
 459         * NEWS: Announce it.
 460
 461 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 462
 463         * record-btrace.c (record_btrace_set_replay)
 464         (record_btrace_goto_begin, record_btrace_goto_end)
 465         (record_btrace_goto): New.
 466         (init_record_btrace_ops): Initialize them.
 467         * NEWS: Announce it.
 468
 469 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 470
 471         * record-btrace.c (record_btrace_find_new_threads)
 472         (record_btrace_thread_alive): New.
 473         (init_record_btrace_ops): Initialize to_find_new_threads and
 474         to_thread_alive.
 475
 476 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 477
 478         * record-btrace.c (record_btrace_resume): New.
 479         (record_btrace_wait): New.
 480         (init_record_btrace_ops): Initialize to_wait and to_resume.
 481
 482 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 483
 484         * record-btrace.c (record_btrace_xfer_partial)
 485         (record_btrace_insert_breakpoint, record_btrace_remove_breakpoint)
 486         (record_btrace_allow_memory_access): New.
 487         (init_record_btrace_ops): Initialize new methods.
 488         * target.c (raw_memory_xfer_partial): Bail out if target reports
 489         that this memory is not available.
 490
 491 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 492
 493         * target.h (target_ops) <to_insert_breakpoint>
 494         <to_remove_breakpoint>: Add target_ops parameter.
 495         (forward_target_insert_breakpoint): New.
 496         (forward_target_remove_breakpoint): New.
 497         (memory_remove_breakpoint, memory_insert_breakpoint):
 498         Add target_ops parameter.
 499         * target.c (target_insert_breakpoint): Split into this and ...
 500         (forward_target_insert_breakpoint): ... this.
 501         (target_remove_breakpoint): Split into this and ...
 502         (forward_target_remove_breakpoint): ... this.
 503         (debug_to_insert_breakpoint): Add target_ops parameter.
 504         Call forward_target_insert_breakpoint.
 505         (debug_to_remove_breakpoint): Add target_ops parameter.
 506         Call forward_target_remove_breakpoint.
 507         (update_current_target): Do not inherit or default to_insert_breakpoint
 508         and to_remove_breakpoint.
 509         * corelow.c (ignore): Add target_ops parameter.
 510         * exec.c (ignore): Add target_ops parameter.
 511         * mem-break.c (memory_insert_breakpoint, memory_remove_breakpoint):
 512         Add target_ops parameter.
 513         * monitor.c (monitor_insert_breakpoint, monitor_remove_breakpoint):
 514         Add target_ops parameter.
 515         * nto-procfs.c (procfs_insert_breakpoint, procfs_remove_breakpoint):
 516         Add target_ops parameter.
 517         * record-full.c (record_full_beneath_to_insert_breakpoint)
 518         (record_full_beneath_to_remove_breakpoint, tmp_to_insert_breakpoint)
 519         (tmp_to_remove_breakpoint, record_full_insert_breakpoint)
 520         (record_full_remove_breakpoint, record_full_core_insert_breakpoint)
 521         (record_full_core_remove_breakpoint): Add target_ops parameter.
 522         Update users.
 523         (record_full_beneath_to_insert_breakpoint_ops)
 524         (record_full_beneath_to_remove_breakpoint_ops)
 525         (tmp_to_insert_breakpoint_ops, tmp_to_remove_breakpoint_ops): New.
 526         (record_full_open): Initialize tmp_to_insert_breakpoint_ops,
 527         tmp_to_remove_breakpoint_ops,
 528         record_full_beneath_to_insert_breakpoint_ops, and
 529         record_full_beneath_to_remove_breakpoint_ops.
 530         * remote-m32r-sdi.c (m32r_insert_breakpoint)
 531         (m32r_remove_breakpoint): Add target_ops parameter.
 532         * remote-mips.c (mips_insert_breakpoint, mips_remove_breakpoint):
 533         Add target_ops parameter.
 534         * remote.c (remote_insert_breakpoint, remote_remove_breakpoint):
 535         Add target_ops parameter.
 536
 537 2014-01-16  Jan Kratochvil  <jan.kratochvil@redhat.com>
 538             Markus Metzger  <markus.t.metzger@intel.com>
 539
 540         * record-btrace.c: Include frame-unwind.h.
 541         (record_btrace_frame_unwind_stop_reason)
 542         (record_btrace_frame_this_id, record_btrace_frame_prev_register)
 543         (record_btrace_frame_sniffer, record_btrace_frame_unwind):
 544         New.
 545         (init_record_btrace_ops): Install it.
 546
 547 2014-01-16  Jan Kratochvil  <jan.kratochvil@redhat.com>
 548
 549         * frame.c (get_frame_unwind_stop_reason): Unconditionally call
 550         get_prev_frame_1.
 551
 552 2014-01-16  Jan Kratochvil  <jan.kratochvil@redhat.com>
 553
 554         * dwarf2-frame.c (dwarf2_frame_cfa): Move UNWIND_UNAVAILABLE check
 555         earlier.
 556
 557 2014-01-16  Jan Kratochvil  <jan.kratochvil@redhat.com>
 558
 559         * frame-unwind.c: Include target.h.
 560         (frame_unwind_try_unwinder): New function with code from ...
 561         (frame_unwind_find_by_frame): ... here.  New variable
 562         unwinder_from_target, call also target_get_unwinder)
 563         (target_get_tailcall_unwinder, and frame_unwind_try_unwinder for it.
 564         * target.c (target_get_unwinder, target_get_tailcall_unwinder): New.
 565         * target.h (struct target_ops): New fields to_get_unwinder and
 566         to_get_tailcall_unwinder.
 567         (target_get_unwinder, target_get_tailcall_unwinder): New declarations.
 568
 569 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 570
 571         * record-btrace.c (record_btrace_fetch_registers)
 572         (record_btrace_store_registers)
 573         (record_btrace_to_prepare_to_store): New.
 574         (init_record_btrace_ops): Add the above.
 575
 576 2014-01-16  Tom Tromey  <tromey@redhat.com>
 577
 578         * windows-nat.c (windows_prepare_to_store): Add 'self' argument.
 579         * target.h (struct target_ops) <to_prepare_to_store>: Add
 580         argument.
 581         (target_prepare_to_store): Add argument.
 582         * target.c (debug_to_prepare_to_store): Add argument.
 583         (update_current_target): Update.
 584         * remote.c (remote_prepare_to_store): Add 'self' argument.
 585         * remote-sim.c (gdbsim_prepare_to_store): Add 'self' argument.
 586         * remote-mips.c (mips_prepare_to_store): Add 'self' argument.
 587         * remote-m32r-sdi.c (m32r_prepare_to_store): Add 'self' argument.
 588         * record-full.c (record_full_core_prepare_to_store): Add 'self'
 589         argument.
 590         * ravenscar-thread.c (ravenscar_prepare_to_store): Add argument.
 591         * nto-procfs.c (procfs_prepare_to_store): Add 'self' argument.
 592         * monitor.c (monitor_prepare_to_store): Add 'self' argument.
 593         * inf-child.c (inf_child_prepare_to_store): Add 'self' argument.
 594         * go32-nat.c (go32_prepare_to_store): Add 'self' argument.
 595
 596 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 597
 598         * btrace.h (replay) <replay>: New.
 599         (btrace_is_replaying): New.
 600         * btrace.c (btrace_clear): Free replay iterator.
 601         (btrace_is_replaying): New.
 602         * record-btrace.c (record_btrace_is_replaying): New.
 603         (record_btrace_info): Print insn number if replaying.
 604         (record_btrace_insn_history): Start at replay position.
 605         (record_btrace_call_history): Start at replay position.
 606         (init_record_btrace_ops): Init to_record_is_replaying.
 607
 608 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 609
 610         * record-btrace.c (record_btrace_insn_history_range): Include
 611         end.
 612         (record_btrace_insn_history_from): Adjust range.
 613         (record_btrace_call_history_range): Include
 614         end.
 615         (record_btrace_call_history_from): Adjust range.
 616         * NEWS: Announce changes.
 617
 618 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 619
 620         * record.h (enum record_print_flag)
 621         <record_print_indent_calls>: New.
 622         * record.c (get_call_history_modifiers): Recognize /c modifier.
 623         (_initialize_record): Document /c modifier.
 624         * record-btrace.c (btrace_call_history): Add btinfo parameter.
 625         Reorder fields.  Optionally indent the function name.  Update
 626         all users.
 627         * NEWS: Announce changes.
 628
 629 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 630
 631         * common/linux-btrace.c (linux_enable_btrace): Enlarge buffer.
 632
 633 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 634
 635         * btrace.c (ftrace_new_function): Start counting at one.
 636         * record-btrace.c (record_btrace_info): Adjust number of calls
 637         and insns.
 638         * NEWS: Announce it.
 639
 640 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 641
 642         * record-btrace.c (btrace_call_history_insn_range): Print
 643         insn range as [begin, end].
 644
 645 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 646
 647         * btrace.h (struct btrace_func_link): New.
 648         (enum btrace_function_flag): New.
 649         (struct btrace_inst): Rename to ...
 650         (struct btrace_insn): ...this. Update all users.
 651         (struct btrace_func) <ibegin, iend>: Remove.
 652         (struct btrace_func_link): New.
 653         (struct btrace_func): Rename to ...
 654         (struct btrace_function): ...this. Update all users.
 655         (struct btrace_function) <segment, flow, up, insn, insn_offset)
 656         (number, level, flags>: New.
 657         (struct btrace_insn_iterator): Rename to ...
 658         (struct btrace_insn_history): ...this.
 659         Update all users.
 660         (struct btrace_insn_iterator, btrace_call_iterator): New.
 661         (struct btrace_target_info) <btrace, itrace, ftrace>: Remove.
 662         (struct btrace_target_info) <begin, end, level>
 663         <insn_history, call_history>: New.
 664         (btrace_insn_get, btrace_insn_number, btrace_insn_begin)
 665         (btrace_insn_end, btrace_insn_prev, btrace_insn_next)
 666         (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get)
 667         (btrace_call_number, btrace_call_begin, btrace_call_end)
 668         (btrace_call_prev, btrace_call_next, btrace_call_cmp)
 669         (btrace_find_function_by_number, btrace_set_insn_history)
 670         (btrace_set_call_history): New.
 671         * btrace.c (btrace_init_insn_iterator)
 672         (btrace_init_func_iterator, compute_itrace): Remove.
 673         (ftrace_print_function_name, ftrace_print_filename)
 674         (ftrace_skip_file): Change
 675         parameter to const.
 676         (ftrace_init_func): Remove.
 677         (ftrace_debug): Use new btrace_function fields.
 678         (ftrace_function_switched): Also consider gaining and
 679         losing symbol information).
 680         (ftrace_print_insn_addr, ftrace_new_call, ftrace_new_return)
 681         (ftrace_new_switch, ftrace_find_caller, ftrace_new_function)
 682         (ftrace_update_caller, ftrace_fixup_caller, ftrace_new_tailcall):
 683         New.
 684         (ftrace_new_function): Move. Remove debug print.
 685         (ftrace_update_lines, ftrace_update_insns): New.
 686         (ftrace_update_function): Check for call, ret, and jump.
 687         (compute_ftrace): Renamed to ...
 688         (btrace_compute_ftrace): ...this. Rewritten to compute call
 689         stack.
 690         (btrace_fetch, btrace_clear): Updated.
 691         (btrace_insn_get, btrace_insn_number, btrace_insn_begin)
 692         (btrace_insn_end, btrace_insn_prev, btrace_insn_next)
 693         (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get)
 694         (btrace_call_number, btrace_call_begin, btrace_call_end)
 695         (btrace_call_prev, btrace_call_next, btrace_call_cmp)
 696         (btrace_find_function_by_number, btrace_set_insn_history)
 697         (btrace_set_call_history): New.
 698         * record-btrace.c (require_btrace): Use new btrace thread
 699         info fields.
 700         (record_btrace_info, btrace_insn_history)
 701         (record_btrace_insn_history, record_btrace_insn_history_range):
 702         Use new btrace thread info fields and new iterator.
 703         (btrace_func_history_src_line): Rename to ...
 704         (btrace_call_history_src_line): ...this. Use new btrace
 705         thread info fields.
 706         (btrace_func_history): Rename to ...
 707         (btrace_call_history): ...this. Use new btrace thread info
 708         fields and new iterator.
 709         (record_btrace_call_history, record_btrace_call_history_range):
 710         Use new btrace thread info fields and new iterator.
 711
 712 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 713
 714         * frame.h (frame_id_build_unavailable_stack_special): New.
 715         * frame.c (frame_id_build_unavailable_stack_special): New.
 716
 717 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 718
 719         * amd64-tdep.c (amd64_classify_insn_at, amd64_insn_is_call)
 720         (amd64_insn_is_ret, amd64_insn_is_jump, amd64_jmp_p): New.
 721         (amd64_init_abi): Add insn_is_call, insn_is_ret, and insn_is_jump
 722         to gdbarch.
 723         * i386-tdep.c (i386_insn_is_call, i386_insn_is_ret)
 724         (i386_insn_is_jump, i386_jmp_p): New.
 725         (i386_gdbarch_init): Add insn_is_call, insn_is_ret, and
 726         insn_is_jump to gdbarch.
 727         * gdbarch.sh (insn_is_call, insn_is_ret, insn_is_jump): New.
 728         * gdbarch.h: Regenerated.
 729         * gdbarch.c: Regenerated.
 730         * arch-utils.h (default_insn_is_call, default_insn_is_ret)
 731         (default_insn_is_jump): New.
 732         * arch-utils.c (default_insn_is_call, default_insn_is_ret)
 733         (default_insn_is_jump): New.
 734
 735 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 736
 737         * common/btrace-common.h (btrace_read_type) <btrace_read_all>:
 738         Change to ...
 739         (btrace_read_type) <BTRACE_READ_ALL>: ... this.  Update users.
 740         (btrace_read_type) <btrace_read_new>: Change to ...
 741         (btrace_read_type) <BTRACE_READ_NEW>: ... this.  Update users.
 742
 743 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
 744
 745         * common/linux-btrace.c (linux_read_btrace): Free trace from
 746         previous iteration.
 747
 748 2014-01-15  Doug Evans  <dje@google.com>
 749
 750         * dwarf2read.c (open_and_init_dwp_file): Use pulongest to print
 751         uint32_t.
 752
 753 2014-01-15  Tom Tromey  <tromey@redhat.com>
 754
 755         * dbxread.c (process_one_symbol): Use set_objfile_main_name.
 756         * dwarf2read.c (read_partial_die): Use set_objfile_main_name.
 757         * objfiles.c (get_objfile_bfd_data): Initialize language_of_main.
 758         (set_objfile_main_name): New function.
 759         * objfiles.h (struct objfile_per_bfd_storage) <name_of_main,
 760         language_of_main>: New fields.
 761         (set_objfile_main_name): Declare.
 762         * symtab.c (find_main_name): Loop over objfiles to find the main
 763         name and language.
 764         (set_main_name): Now static.
 765         (get_main_info): Add comment.
 766         * symtab.h (set_main_name): Don't declare.
 767
 768 2014-01-15  Tom Tromey  <tromey@redhat.com>
 769
 770         * symtab.c (main_progspace_key): New global.
 771         (struct main_info): New.
 772         (name_of_main, language_of_main): Remove.
 773         (get_main_info, main_info_cleanup): New function.
 774         (set_main_name, main_name, main_language): Use get_main_info.
 775         (_initialize_symtab): Initialize main_progspace_key.
 776
 777 2014-01-15  Tom Tromey  <tromey@redhat.com>
 778
 779         * dbxread.c (process_one_symbol): Update.
 780         * dwarf2read.c (read_partial_die): Update.
 781         * symfile.c (set_initial_language): Call main_language.
 782         * symtab.c (language_of_main): Now static.
 783         (set_main_name): Add 'lang' parameter.
 784         (find_main_name): Update.
 785         (main_language): New function.
 786         (symtab_observer_executable_changed): Update.
 787         * symtab.h (set_main_name): Update.
 788         (language_of_main): Remove.
 789         (main_language): Declare.
 790
 791 2014-01-15  Tom Tromey  <tromey@redhat.com>
 792
 793         * symfile.c (init_entry_point_info): Use new "initialized" field.
 794         Update.
 795         * objfiles.h (struct entry_point) <initialized>: New field.
 796         (struct objfile_per_bfd_storage) <ei>: New field, moved from...
 797         (struct objfile) <ei>: ...here.  Remove.
 798         * objfiles.c (entry_point_address_query): Update.
 799
 800 2014-01-15  Tom Tromey  <tromey@redhat.com>
 801
 802         * objfiles.c (entry_point_address_query): Relocate entry point
 803         address.
 804         (objfile_relocate1): Do not relocate entry point address.
 805         * objfiles.h (struct entry_info) <entry_point>: Update comment.
 806         <the_bfd_section_index>: New field.
 807         * symfile.c (init_entry_point_info): Find the entry point's
 808         section.
 809
 810 2014-01-15  Tom Tromey  <tromey@redhat.com>
 811
 812         * solib-frv.c (enable_break): Use entry_point_address_query.
 813
 814 2014-01-15  Omair Javaid  <omair.javaid@linaro.org>
 815
 816         * NEWS: Add note on improved process record-replay on
 817         arm*-linux* targets.
 818
 819 2014-01-15  Omair Javaid  <omair.javaid@linaro.org>
 820
 821         * arm-tdep.c (enum arm_record_result): New enum.
 822         (arm_record_unsupported_insn): New function.
 823         (arm_record_coproc_data_proc): Removed.
 824         (thumb2_record_ld_st_multiple): New function.
 825         (thumb2_record_ld_st_dual_ex_tbb): New function.
 826         (thumb2_record_data_proc_sreg_mimm): New function.
 827         (thumb2_record_ps_dest_generic): New function.
 828         (thumb2_record_branch_misc_cntrl): New function.
 829         (thumb2_record_str_single_data): New function.
 830         (thumb2_record_ld_mem_hints): New function.
 831         (thumb2_record_ld_word): New function.
 832         (thumb2_record_lmul_lmla_div): New function.
 833         (thumb2_record_decode_insn_handler): New function.
 834         (decode_insn): Add thumb32 instruction handlers.
 835
 836 2014-01-15  Omair Javaid  <omair.javaid@linaro.org>
 837
 838         * arm-linux-tdep.c: Include "record-full.h" and "linux-record.h".
 839         (struct arm_linux_record_tdep): Declare.
 840         (arm_canonicalize_syscall): New function.
 841         (arm_all_but_pc_registers_record): New function.
 842         (arm_linux_syscall_record): New function.
 843         (arm_linux_init_abi): Add syscall recording constructs.
 844         * arm-tdep.c (thumb_record_ldm_stm_swi): Update thumb syscall
 845         decoding.  (arm_record_coproc_data_proc): Update arm syscall
 846         decoding.
 847         * arm-tdep.h (struct gdbarch_tdep) <arm_swi_record>: Remove.
 848         <arm_syscall_record>: New field.
 849         * configure.tgt (arm*-*-linux*): Add linux-record.o to
 850         gdb_target_obs.
 851
 852 2014-01-15  Omair Javaid  <omair.javaid@linaro.org>
 853
 854         * arm-tdep.c (thumb_record_misc): Update to use sp as base
 855         register for push instruction recording.
 856
 857 2014-01-15  Omair Javaid  <omair.javaid@linaro.org>
 858
 859         * arm-tdep.c (thumb_record_misc): Update to correct logical
 860         error while recording ldm, ldmia and pop instructions.
 861
 862 2014-01-15  Omair Javaid  <omair.javaid@linaro.org>
 863
 864         * arm-tdep.c (struct arm_mem_r) <addr>: Change type to uint32_t.
 865
 866 2014-01-15  Pedro Alves  <palves@redhat.com>
 867
 868         * go32-nat.c (go32_open, go32_close, go32_attach, go32_detach)
 869         (go32_resume, go32_fetch_registers, store_register)
 870         (go32_store_registers, go32_prepare_to_store)
 871         (go32_xfer_memory, go32_files_info, go32_kill_inferior)
 872         (go32_create_inferior, go32_can_run, go32_terminal_init)
 873         (go32_terminal_inferior, go32_terminal_ours): Delete forward
 874         declarations.
 875
 876 2014-01-15  Tom Tromey  <tromey@redhat.com>
 877
 878         * target.h (async_callback_ftype): New typedef.
 879         (struct target_ops) <to_async>: Use it.
 880
 881 2014-01-15  Joel Brobecker  <brobecker@adacore.com>
 882
 883         * python/py-value.c (get_field_type): Remove unnecessary curly
 884         braces for single-statement if block.
 885
 886 2014-01-15  Joel Brobecker  <brobecker@adacore.com>
 887
 888         * python/py-type.c (convert_field): Add missing empty line
 889         after declarations.
 890
 891 2014-01-14  Doug Evans  <dje@google.com>
 892
 893         * symfile.h (expand_symtabs_matching): Renamed from
 894         expand_partial_symbol_names.  Update prototype.
 895         (map_symbol_filenames): Renamed from map_partial_symbol_filenames.
 896         * symfile.c (expand_symtabs_matching): Renamed from
 897         expand_partial_symbol_names.  New args file_matcher, kind.
 898         Rename arg fun to symbol_matcher.
 899         (map_symbol_filenames): Renamed from map_partial_symbol_filenames.
 900         * ada-lang.c (ada_complete_symbol_matcher): Renamed from
 901         ada_expand_partial_symbol_name.
 902         (ada_make_symbol_completion_list): Update to call
 903         expand_symtabs_matching.
 904         (ada_add_global_exceptions): Call expand_symtabs_matching.
 905         * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_files): Update to
 906         call map_symbol_filenames.
 907         * symtab.c (sources_info): Update to call map_symbol_filenames.
 908         (search_symbols): Call expand_symtabs_matching.
 909         (symbol_completion_matcher): Renamed from expand_partial_symbol_name.
 910         (default_make_symbol_completion_list_break_on): Update to call
 911         expand_symtabs_matching.
 912         (make_source_files_completion_list): Update to call
 913         map_symbol_filenames.
 914
 915 2014-01-14  Doug Evans  <dje@google.com>
 916
 917         * symfile.h (expand_symtabs_file_matcher_ftype): New typedef.
 918         (expand_symtabs_symbol_matcher_ftype): New typedef.
 919         (quick_symbol_functions.expand_symtabs_matching): Update to use.
 920         expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
 921         * symfile.c (expand_partial_symbol_names): Update to use
 922         expand_symtabs_symbol_matcher_ftype.
 923         * dwarf2read.c (dw2_expand_symtabs_matching): Update to use
 924         expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
 925         Arg name_matcher renamed to symbol_matcher.
 926         * psymtab.c (recursively_search_psymtabs): Update to use
 927         expand_symtabs_symbol_matcher_ftype.  Arg name_matcher renamed to
 928         sym_matcher.
 929         (expand_symtabs_matching_via_partial): Update to use
 930         expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
 931         Arg name_matcher renamed to symbol_matcher.
 932
 933 2014-01-14  Doug Evans  <dje@google.com>
 934
 935         * psymtab.c (expand_partial_symbol_names): Delete, moved to symfile.c.
 936         (map_partial_symbol_filenames): Ditto.
 937         * psymtab.h (expand_partial_symbol_names): Delete, moved to symfile.h.
 938         (map_partial_symbol_filenames): Ditto.
 939         * symfile.c (expand_partial_symbol_names): Moved here from psymtab.c.
 940         (map_partial_symbol_filenames): Ditto.
 941         * symfile.h (expand_partial_symbol_names): Moved here from psymtab.h.
 942         (map_partial_symbol_filenames): Ditto.
 943         * symtab.c: Delete #include "psymtab.h".
 944
 945 2014-01-14  Pedro Alves  <palves@redhat.com>
 946             Tom Tromey  <tromey@redhat.com>
 947
 948         * infrun.c (use_displaced_stepping): Use find_record_target
 949         instead of RECORD_IS_USED.
 950         (adjust_pc_after_break): Use record_full_is_used instead of
 951         RECORD_IS_USED.
 952         * record-btrace.c (record_btrace_open): Call record_preopen
 953         instead of checking RECORD_IS_USED.
 954         * record-full.c (record_full_shortname)
 955         (record_full_core_shortname): New globals.
 956         (record_full_is_used): New function.
 957         (find_full_open): Call record_preopen instead of checking
 958         RECORD_IS_USED.
 959         (init_record_full_ops): Set the target's shortname to
 960         record_full_shortname.
 961         (init_record_full_core_ops): Set the target's shortname to
 962         record_full_core_shortname.
 963         * record-full.h (record_full_is_used): Declare.
 964         * record.c (find_record_target): Make extern.
 965         (record_preopen): New function.
 966         * record.h (RECORD_IS_USED): Delete macro.
 967         (find_record_target, record_preopen): Declare functions.
 968
 969 2014-01-14  Yao Qi  <yao@codesourcery.com>
 970
 971         * gdbarch.sh (core_xfer_shared_libraries): Change its argument
 972         'len''s type to ULONGEST.
 973         (core_xfer_shared_libraries_aix): Likewise.
 974         * gdbarch.c, gdbarch.h: Regenerated.
 975         * i386-cygwin-tdep.c (windows_core_xfer_shared_libraries):
 976         Change type of 'len' to ULONGEST.
 977         * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise.
 978         (rs6000_aix_core_xfer_shared_libraries_aix): Likewise.
 979
 980 2014-01-14  Yao Qi  <yao@codesourcery.com>
 981
 982         * common/linux-osdata.c (linux_xfer_osdata_processes): Change
 983         type of 'len' to ULONGEST.
 984         (linux_xfer_osdata_processgroups): Likewise.
 985         (linux_xfer_osdata_threads): Likewise.
 986         (linux_xfer_osdata_fds): Likewise.
 987         (linux_xfer_osdata_isockets): Likewise.
 988         (linux_xfer_osdata_shm): Likewise.
 989         (linux_xfer_osdata_sem): Likewise.
 990         (linux_xfer_osdata_msg): Likewise.
 991         (linux_common_xfer_osdata): Likewise.
 992         (struct osdata_type) <getter>: Likewise.
 993         * common/linux-osdata.h (linux_common_xfer_osdata): Update
 994         the declaration.
 995
 996 2014-01-14  Yao Qi  <yao@codesourcery.com>
 997
 998         * target.h (target_xfer_partial_ftype): Update.
 999         (struct target_ops) <to_xfer_partial>: Change 'len' type to
1000         ULONGEST.
1001         * aix-thread.c (aix_thread_xfer_partial): Change type of
1002         argument 'len' to ULONGEST.
1003         * auxv.c (procfs_xfer_auxv): Likewise.
1004         (ld_so_xfer_auxv): Likewise.
1005         (memory_xfer_auxv): Likewise.
1006         * bfd-target.c (target_bfd_xfer_partial): Likewise.
1007         * bsd-kvm.c (bsd_kvm_xfer_partial): Likewise.
1008         * bsd-uthread.c (bsd_uthread_xfer_partial): Likewise.
1009         * corelow.c (core_xfer_partial): Likewise.
1010         * ctf.c (ctf_xfer_partial): Likewise.
1011         * darwin-nat.c (darwin_read_write_inferior): Likewise.  Use
1012         '%u'.
1013         (darwin_read_dyld_info): Likewise.
1014         (darwin_xfer_partial): Likewise.
1015         * exec.c (section_table_xfer_memory_partial): Likewise.
1016         (exec_xfer_partial): Likewise.
1017         * exec.h (section_table_xfer_memory_partial): Update
1018         declaration.
1019         * gnu-nat.c (gnu_xfer_memory): Likewise.  Call pulongest
1020         instead of plongest.
1021         (gnu_xfer_partial): Likewise.
1022         * ia64-hpux-nat.c (ia64_hpux_xfer_memory): Likewise.
1023         (ia64_hpux_xfer_solib_got): Likewise.
1024         (ia64_hpux_xfer_partial): Likewise.
1025         * ia64-linux-nat.c (ia64_linux_xfer_partial):
1026         * inf-ptrace.c (inf_ptrace_xfer_partial):
1027         * inf-ttrace.c (inf_ttrace_xfer_partial):
1028         * linux-nat.c (linux_xfer_siginfo): Likewise.
1029         (linux_nat_xfer_partial): Likewise.
1030         (spu_enumerate_spu_ids, linux_proc_xfer_spu): Likewise.
1031         (linux_nat_xfer_osdata, linux_xfer_partial): Likewise.
1032         * monitor.c (monitor_xfer_memory): Likewise.
1033         (monitor_xfer_partial): Likewise.
1034         * procfs.c (procfs_xfer_partial): Likewise.
1035         * record-full.c (record_full_xfer_partial): Likewise.
1036         (record_full_core_xfer_partial): Likewise.
1037         * remote-sim.c (gdbsim_xfer_memory): Likewise.  Call pulongest
1038         instead of plongest.
1039         (gdbsim_xfer_partial): Likewise.
1040         * remote.c (remote_xfer_partial): Likewise.
1041         * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise.
1042         * rs6000-aix-tdep.h (rs6000_aix_ld_info_to_xml): Update
1043         declaration.
1044         * rs6000-nat.c (rs6000_xfer_partial): Likewise.
1045         (rs6000_xfer_shared_libraries): Likewise.
1046         * sol-thread.c (sol_thread_xfer_partial): Likewise.
1047         * sparc-nat.c (sparc_xfer_wcookie): Likewise.
1048         (sparc_xfer_partial): Likewise.
1049         * spu-linux-nat.c (spu_proc_xfer_spu): Likewise.
1050         (spu_xfer_partial): Likewise.
1051         * spu-multiarch.c (spu_xfer_partial): Likewise.
1052         * target.c (target_read_live_memory): Likewise.
1053         (memory_xfer_live_readonly_partial): Likewise.
1054         (memory_xfer_partial, memory_xfer_partial_1): Likewise.
1055         (target_xfer_partial, default_xfer_partial): Likewise.
1056         (current_xfer_partial): Likewise.
1057         * tracepoint.c (tfile_xfer_partial): Likewise.
1058         * windows-nat.c (windows_xfer_memory): Likewise.  Call
1059         pulongest instead of plongest.
1060         (windows_xfer_partial): Likewise.
1061         (windows_xfer_shared_libraries): Likewise.
1062
1063 2014-01-14  Yao Qi  <yao@codesourcery.com>
1064
1065         * rs6000-nat.c (rs6000_xfer_shared_libraries): Use
1066         target_xfer_partial_ftype.
1067
1068 2014-01-13  Siva Chandra Reddy  <sivachandra@google.com>
1069
1070         PR python/15464
1071         PR python/16113
1072         * valops.c (value_struct_elt_bitpos): New function
1073         * py-type.c (convert_field): Set 'name' attribute of a gdb.Field
1074         object to 'None' if the field name is an empty string ("").
1075         * python/py-value.c (valpy_getitem): Use 'bitpos' and 'type'
1076         attribute to look for a field when 'name' is 'None'.
1077         (get_field_type): New function
1078
1079 2014-01-13  Doug Evans  <dje@google.com>
1080
1081         PR symtab/16426
1082         * dwarf2read.c (dwarf2_get_dwz_file): Call gdb_bfd_record_inclusion.
1083         (try_open_dwop_file): Ditto.
1084         * gdb_bfd.c: #include "vec.h".
1085         (bfdp): New typedef.
1086         (struct gdb_bfd_data): New member included_bfds.
1087         (gdb_bfd_unref): Unref all included bfds.
1088         (gdb_bfd_record_inclusion): New function.
1089         * gdb_bfd.h (gdb_bfd_record_inclusion): Declare.
1090
1091 2014-01-13  Tom Tromey  <tromey@redhat.com>
1092
1093         * gdbcore.h (deprecated_core_resize_section_table): Remove.
1094
1095 2014-01-13  Tom Tromey  <tromey@redhat.com>
1096
1097         * defs.h (use_windows): Remove.
1098         * gdb.c (main): Update.
1099         * main.c (captured_main, gdb_main): Update.
1100         * main.h (struct captured_main_args) <use_windows>: Remove.
1101         * top.c (use_windows): Remove.
1102
1103 2014-01-13  Tom Tromey  <tromey@redhat.com>
1104
1105         * defs.h (deprecated_flush_hook): Remove.
1106
1107 2014-01-13  Jan Kratochvil  <jan.kratochvil@redhat.com>
1108
1109         PR threads/16216
1110         * linux-thread-db.c (try_thread_db_load): Add parameter
1111         check_auto_load_safe.  Move here the file_is_auto_load_safe call.
1112         (try_thread_db_load_from_pdir_1): Move it there from here.
1113         (try_thread_db_load_from_sdir): Update caller.
1114         (try_thread_db_load_from_dir): Move it there from here.
1115
1116 2014-01-13  Patrick Palka  <patrick@parcs.ath.cx>
1117
1118         * regformats/regdat.sh: Always rewrite the register file.
1119
1120 2014-01-13  Pedro Alves  <palves@redhat.com>
1121
1122         * Makefile.in (CHECK_HEADERS): New variable.
1123         (check-headers:): New rule.
1124
1125 2014-01-13  Tom Tromey  <tromey@redhat.com>
1126
1127         * cli/cli-setshow.c (do_set_command): Update.
1128         * defs.h (deprecated_set_hook): Remove.
1129         * top.c (deprecated_set_hook): Remove.
1130
1131 2014-01-13  Pedro Alves  <palves@redhat.com>
1132
1133         * tracepoint.c (tfile_fetch_registers): Don't infer the PC from
1134         the tracepoint if the PC is a pseudo-register.
1135
1136 2014-01-13  Tom Tromey  <tromey@redhat.com>
1137
1138         * defs.h (XCALLOC): Remove.
1139         * bcache.c (bcache_xmalloc): Use XCNEW, not XCALLOC.
1140         (print_bcache_statistics): Use XCNEWVEC, not XCALLOC.
1141         * dwarf2loc.c (allocate_piece_closure): Likewise.
1142         * elfread.c (elf_symfile_segments): Likewise.
1143         (elf_symfile_segments): Likewise.
1144         * gdbtypes.c (copy_type_recursive): Likewise.
1145         * i386-tdep.c (i386_gdbarch_init): Use XCNEW, not XCALLOC.
1146         * jit.c (jit_frame_sniffer): Use XCNEWVEC, not XCALLOC.
1147         * minsyms.c (prim_record_minimal_symbol_full): Use XCNEW, not
1148         XCALLOC.
1149         * mt-tdep.c (mt_gdbarch_init): Likewise.
1150         * opencl-lang.c (allocate_lval_closure): Use XCNEWVEC, not
1151         XCALLOC.
1152         * psymtab.c (psymbol_compare): Use XCNEW, not XCALLOC.
1153         * regcache.c (regcache_xmalloc_1): Use XCNEWVEC, not XCALLOC.
1154         * registry.c (registry_alloc_data): Likewise.
1155         * rs6000-tdep.c (rs6000_gdbarch_init): Use XCNEW, not XCALLOC.
1156         * s390-linux-tdep.c (s390_gdbarch_init): Likewise.
1157         * serial.c (serial_fdopen_ops): Likewise.
1158         * solib-aix.c (solib_aix_get_section_offsets): Use XCNEWVEC, not
1159         XCALLOC.
1160         * spu-tdep.c (spu_gdbarch_init): Use XCNEW, not XCALLOC.
1161         * symfile.c (default_symfile_segments): Use XCNEW and XCNEWVEC,
1162         not XCALLOC.
1163
1164 2014-01-13  Tom Tromey  <tromey@redhat.com>
1165
1166         * defs.h (XMALLOC): Remove.
1167         * avr-tdep.c (avr_gdbarch_init): Use XNEW, not XMALLOC.
1168         * bfin-tdep.c (bfin_gdbarch_init): Likewise.
1169         * cli-out.c (struct ui_out *): Likewise.
1170         * cli/cli-dump.c (add_dump_command): Likewise.
1171         (add_dump_command): Likewise.
1172         * complaints.c (get_complaints): Likewise.
1173         (find_complaint): Likewise.
1174         * dwarf2-frame.c (execute_cfa_program): Likewise.
1175         * dwarf2read.c (abbrev_table_read_table): Likewise.
1176         * gdbarch.sh: Likewise.
1177         * gdbarch.c: Rebuild.
1178         * inf-ttrace.c (inf_ttrace_add_page): Likewise.
1179         * interps.c (interp_new): Likewise.
1180         * lm32-tdep.c (lm32_gdbarch_init): Likewise.
1181         * m32r-tdep.c (m32r_gdbarch_init): Likewise.
1182         * mi/mi-console.c (mi_console_file_new): Likewise.
1183         * mi/mi-interp.c (mi_interpreter_init): Likewise.
1184         * mi/mi-out.c (mi_out_new): Likewise.
1185         * mi/mi-parse.c (mi_parse): Likewise.
1186         * microblaze-tdep.c (microblaze_gdbarch_init): Likewise.
1187         * moxie-tdep.c (moxie_gdbarch_init): Likewise.
1188         * observer.c (xalloc_observer_list_node): Likewise.
1189         * regcache.c (regcache_xmalloc_1): Likewise.
1190         * reggroups.c (reggroup_new): Likewise.
1191         (_initialize_reggroup): Likewise.
1192         * registry.c (register_data_with_cleanup): Likewise.
1193         * remote.c (remote_notif_stop_alloc_reply): Likewise.
1194         * ser-base.c (serial_ttystate): Likewise.
1195         * ser-mingw.c (make_pipe_state): Likewise.
1196         * ser-pipe.c (pipe_open): Likewise.
1197         * serial.c (serial_open): Likewise.
1198         * sh64-tdep.c (sh64_gdbarch_init): Likewise.
1199         * tui/tui-data.c (tui_alloc_generic_win_info): Likewise.
1200         (tui_alloc_win_info): Likewise.
1201         (tui_add_content_elements): Likewise.
1202         * tui/tui-file.c (tui_file_new): Likewise.
1203         * tui/tui-out.c (tui_out_new): Likewise.
1204         * ui-file.c (mem_file_new): Likewise.
1205         * ui-out.c (push_level): Likewise.
1206         (make_cleanup_ui_out_end): Likewise.
1207         (append_header_to_list): Likewise.
1208         (ui_out_new): Likewise.
1209         * user-regs.c (user_reg_add_builtin): Likewise.
1210
1211 2014-01-13  Tom Tromey  <tromey@redhat.com>
1212
1213         * defs.h (XZALLOC): Remove.
1214         * ada-lang.c (get_ada_inferior_data): Use XCNEW, not XZALLOC.
1215         * ada-tasks.c (get_ada_tasks_pspace_data): Likewise.
1216         (get_ada_tasks_inferior_data): Likewise.
1217         * auto-load.c (get_auto_load_pspace_data): Likewise.
1218         * auxv.c (get_auxv_inferior_data): Likewise.
1219         * bfd-target.c (target_bfd_reopen): Likewise.
1220         * breakpoint.c (get_catch_syscall_inferior_data): Likewise.
1221         (deprecated_insert_raw_breakpoint): Likewise.
1222         * bsd-uthread.c (bsd_uthread_pid_to_str): Likewise.
1223         * corelow.c (core_open): Likewise.
1224         * darwin-nat.c (darwin_check_new_threads): Likewise.
1225         (darwin_attach_pid): Likewise.
1226         * dummy-frame.c (dummy_frame_push): Likewise.
1227         * dwarf2-frame.c (dwarf2_frame_cache): Likewise.
1228         * dwarf2loc.c (allocate_piece_closure): Likewise.
1229         * elfread.c (elf_symfile_segments): Likewise.
1230         * eval.c (ptrmath_type_p): Likewise.
1231         * exceptions.c (EXCEPTIONS_SIGJMP_BUF): Likewise.
1232         * gdbtypes.c (alloc_type_arch): Likewise.
1233         (alloc_type_instance): Likewise.
1234         * hppa-tdep.c (hppa_gdbarch_init): Likewise.
1235         * inf-child.c (inf_child_can_use_agent): Likewise.
1236         * inflow.c (get_inflow_inferior_data): Likewise.
1237         * infrun.c (save_infcall_suspend_state): Likewise.
1238         * jit.c (jit_reader_load): Likewise.
1239         (get_jit_objfile_data): Likewise.
1240         (get_jit_program_space_data): Likewise.
1241         (jit_object_open_impl): Likewise.
1242         (jit_symtab_open_impl): Likewise.
1243         (jit_block_open_impl): Likewise.
1244         (jit_frame_sniffer): Likewise.
1245         * linux-fork.c (add_fork): Likewise.
1246         * maint.c (make_command_stats_cleanup): Likewise.
1247         * objfiles.c (get_objfile_pspace_data): Likewise.
1248         * opencl-lang.c (struct lval_closure): Likewise.
1249         * osdata.c (osdata_start_osdata): Likewise.
1250         * progspace.c (new_address_space): Likewise.
1251         (add_program_space): Likewise.
1252         * remote-sim.c (get_sim_inferior_data): Likewise.
1253         * sh-tdep.c (sh_gdbarch_init): Likewise.
1254         * skip.c (Ignore): Likewise.
1255         (skip_delete_command): Likewise.
1256         * solib-aix.c (get_solib_aix_inferior_data): Likewise.
1257         (library_list_start_library): Likewise.
1258         (solib_aix_current_sos): Likewise.
1259         * solib-darwin.c (get_darwin_info): Likewise.
1260         (darwin_current_sos): Likewise.
1261         * solib-dsbt.c (get_dsbt_info): Likewise.
1262         * solib-ia64-hpux.c (new_so_list): Likewise.
1263         (ia64_hpux_get_solib_linkage_addr): Likewise.
1264         * solib-spu.c (append_ocl_sos): Likewise.
1265         (spu_current_sos): Likewise.
1266         * solib-svr4.c (get_svr4_info): Likewise.
1267         (svr4_keep_data_in_core): Likewise.
1268         (library_list_start_library): Likewise.
1269         (svr4_default_sos): Likewise.
1270         (svr4_read_so_list): Likewise.
1271         * solib-target.c (library_list_start_library): Likewise.
1272         (solib_target_current_sos): Likewise.
1273         * sparc-tdep.c (sparc32_gdbarch_init): Likewise.
1274         * symfile-debug.c (install_symfile_debug_logging): Likewise.
1275         * symfile.c (default_symfile_segments): Likewise.
1276         * target-descriptions.c (tdesc_data_init): Likewise.
1277         (tdesc_create_reg): Likewise.
1278         (struct tdesc_type *): Likewise.
1279         (tdesc_create_vector): Likewise.
1280         (tdesc_set_struct_size): Likewise.
1281         (struct tdesc_type *): Likewise.
1282         (tdesc_free_feature): Likewise.
1283         (tdesc_create_feature): Likewise.
1284         * windows-nat.c (windows_add_thread): Likewise.
1285         (windows_make_so): Likewise.
1286         * xml-support.c (gdb_xml_body_text): Likewise.
1287         (gdb_xml_create_parser_and_cleanup): Likewise.
1288         (xml_process_xincludes): Likewise.
1289         * xml-syscall.c (allocate_syscalls_info): Likewise.
1290         (syscall_create_syscall_desc): Likewise.
1291
1292 2014-01-12  Sergio Durigan Junior  <sergiodj@redhat.com>
1293
1294         * i386-tdep.c (i386_stap_parse_special_token_triplet): New
1295         function, with code from i386_stap_parse_special_token.
1296         (i386_stap_parse_special_token_three_arg_disp): Likewise.
1297         (i386_stap_parse_special_token): Move code to the two functions
1298         above; simplify it.
1299
1300 2014-01-09  Pedro Alves  <palves@redhat.com>
1301             Hui Zhu  <hui@codesourcery.com>
1302
1303         PR gdb/16101
1304         * breakpoint.c (insert_bp_location): Rename hw_bp_err_string to
1305         bp_err_string.  Don't mark the location shlib_disabled if the
1306         error thrown wasn't a generic or memory error.  Catch errors
1307         thrown while inserting breakpoints in overlayed code.  Output
1308         error message of software breakpoints.
1309         * remote.c (remote_insert_breakpoint): If this breakpoint has
1310         target-side commands but this stub doesn't support Z0 packets,
1311         throw NOT_SUPPORTED_ERROR error.
1312         * exceptions.h (enum errors) <NOT_SUPPORTED_ERROR>: New error.
1313         * target.h (target_insert_breakpoint): Extend comment.
1314         (target_insert_hw_breakpoint): Add comment.
1315
1316 2014-01-08  Pedro Alves  <palves@redhat.com>
1317
1318         * remote.c (remote_add_thread): Add threads silently if starting
1319         up.
1320         (remote_notice_new_inferior): If in all-stop, and starting up,
1321         don't call notice_new_inferior.
1322         (get_current_thread): New function, factored out from ...
1323         (add_current_inferior_and_thread): ... this.  Adjust.
1324         (remote_start_remote) <all-stop>: Fetch the thread list.  If we
1325         found any thread, then select the remote's current thread as GDB's
1326         current thread too.
1327
1328 2014-01-08  Joel Brobecker  <brobecker@adacore.com>
1329
1330         * NEWS: Create a new section for the next release branch.
1331         Rename the section of the current branch, now that it has
1332         been cut.
1333
1334 2014-01-08  Joel Brobecker  <brobecker@adacore.com>
1335
1336         GDB 7.7 branch created (79301218fa0f074c5656db0ec8972a5ddcf91fb5):
1337         * version.in: Bump version to 7.7.50.DATE-cvs.
1338
1339 2014-01-08  Yao Qi  <yao@codesourcery.com>
1340
1341         * spu-linux-nat.c (spu_symbol_file_add_from_memory): Change
1342         type of 'id' to gdb_byte.  Cast 'id' to 'const char *'.
1343         (spu_xfer_partial): Cast 'buf' to 'const char *'.
1344
1345 2014-01-08  Yao Qi  <yao@codesourcery.com>
1346
1347         * spu-linux-nat.c (spu_symbol_file_add_from_memory): Pass
1348         return value of bfd_get_filename to symbol_file_add_from_bfd.
1349
1350 2014-01-08  Pierre Muller  <muller@sourceware.org>
1351
1352         Fix PR16201.
1353         * coff-pe-read.c (struct read_pe_section_data): Add index field.
1354         (add_pe_exported_sym): Use SECTION_DATA->INDEX for call
1355         to prim_record_mininal_symbol_and_info.
1356         (add_pe_forwarded_sym): Use known section number of forwarded symbol
1357         in call to prim_record_minimal_symbol_and_info.
1358         (read_pe_exported_syms): Set index field of section_data.
1359
1360 2014-01-07  Andrew Pinski  <apinski@cavium.com>
1361
1362         * features/aarch64-core.xml (cpsr): Change to be 64bit.
1363         * features/aarch64.c: Regenerate.
1364
1365 2014-01-07  Andreas Schwab  <schwab@linux-m68k.org>
1366
1367         * target.c (return_null): Define.
1368         (update_current_target): Use it instead of return_zero for
1369         functions that return a pointer.
1370
1371 2014-01-07  Edjunior Barbosa Machado  <emachado@linux.vnet.ibm.com>
1372
1373         * source.c (add_path): Fix check for duplicated paths in the previously
1374         included paths.
1375
1376 2014-01-07  Honggyu Kim  <hong.gyu.kim@lge.com>
1377
1378         * ada-lang.c: Remove duplicated include statements.
1379         * alphabsd-nat.c: Ditto.
1380         * amd64-darwin-tdep.c: Ditto.
1381         * amd64fbsd-nat.c: Ditto.
1382         * auto-load.c: Ditto.
1383         * ax-gdb.c: Ditto.
1384         * breakpoint.c: Ditto.
1385         * dbxread.c: Ditto.
1386         * fork-child.c: Ditto.
1387         * gdb_usleep.c: Ditto.
1388         * i386-darwin-tdep.c: Ditto.
1389         * i386fbsd-nat.c: Ditto.
1390         * infcmd.c: Ditto.
1391         * inferior.c: Ditto.
1392         * jv-lang.c: Ditto.
1393         * linux-nat.c: Ditto.
1394         * linux-tdep.c: Ditto.
1395         * m68kbsd-nat.c: Ditto.
1396         * m68klinux-nat.c: Ditto.
1397         * microblaze-tdep.c: Ditto.
1398         * mips-linux-tdep.c: Ditto.
1399         * mn10300-tdep.c: Ditto.
1400         * nto-tdep.c: Ditto.
1401         * opencl-lang.c: Ditto.
1402         * osdata.c: Ditto.
1403         * printcmd.c: Ditto.
1404         * regcache.c: Ditto.
1405         * remote-m32r-sdi.c: Ditto.
1406         * remote.c: Ditto.
1407         * symfile.c: Ditto.
1408         * symtab.c: Ditto.
1409         * tilegx-linux-nat.c: Ditto.
1410         * tilegx-tdep.c: Ditto.
1411         * tracepoint.c: Ditto.
1412         * valops.c: Ditto.
1413         * vaxbsd-nat.c: Ditto.
1414         * windows-nat.c: Ditto.
1415         * xtensa-tdep.c: Ditto.
1416
1417 2014-01-07  Yao Qi  <yao@codesourcery.com>
1418
1419         * spu-linux-nat.c (_initialize_spu_nat): Declare.
1420
1421 2014-01-07  Yao Qi  <yao@codesourcery.com>
1422             Joel Brobecker  <brobecker@adacore.com>
1423
1424         * aix-thread.c (pdc_read_regs): Cast parameter to uintptr_t.
1425         (pdc_write_regs): Likewise.
1426         (fetch_regs_kernel_thread): Likewise.
1427         (store_regs_kernel_thread): Likewise.
1428
1429 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
1430
1431         * ada-varobj.c (ada_varobj_adjust_for_child_access): Convert
1432         tagged type objects to their actual type.
1433
1434 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
1435
1436         * ada-valprint.c (print_field_values): Add "language" parameter.
1437         Update calls to print_field_values and print_variant_part.
1438         Pass new parameter "language" in call to val_print instead
1439         of "current_language".  Replace call to ada_val_print by call
1440         to val_print.
1441         (print_variant_part): Add "language" parameter.
1442         (ada_val_print_struct_union): Update call to print_field_values.
1443
1444 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
1445
1446         * ada-valprint.c (ui_memcpy): Delete.
1447         (ada_print_floating): Update documentation.  Add empty line
1448         between between function documentation and implementation.
1449         Delete variable "buffer".  Use ui_file_xstrdup in place of
1450         ui_file_put.  Minor adjustments following this change.
1451
1452 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
1453
1454         * ada-valprint.c (ada_val_print_string): New function,
1455         extracted from ada_val_print_array.
1456         (ada_val_print_array): Replace extracted code by call
1457         to ada_val_print_string followed by a return.  Move
1458         "else" branch to the function's top block.
1459
1460 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
1461
1462         * ada-valprint.c (ada_val_print_array): Move implementation
1463         down.  Rename parameter "offset" and "val" into "offset_aligned"
1464         and "original_value" respectively.  Add parameter "offset".
1465
1466 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
1467
1468         * ada-valprint.c (ada_val_print_ref): Rewrite by mostly
1469         re-organizing the code. Change the "???" message printed
1470         when target type is a TYPE_CODE_UNDEF into
1471         "<ref to undefined type>".
1472
1473 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
1474
1475         * ada-valprint.c (print_record): Delete, implementation inlined...
1476         (ada_val_print_struct_union): ... here.  Remove call to
1477         ada_check_typedef in inlined implementation.
1478
1479 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
1480
1481         * ada-valprint.c (ada_val_print_gnat_array): New function,
1482         extracted from ada_val_print_1;
1483         (ada_val_print_ptr, ada_val_print_num, ada_val_print_enum)
1484         (ada_val_print_flt, ada_val_print_struct_union)
1485         (ada_val_print_ref): Likewise.
1486         (ada_val_print_1): Delete variables i and elttype.
1487         Replace extracted-out code by call to corresponding
1488         new functions.
1489
1490 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
1491
1492         * ada-valprint.c (ada_val_print_1): Remove call to gdb_flush.
1493
1494 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
1495
1496         * ada-valprint.c (ada_val_print_1): Replace calls to
1497         ada_val_print_1 by calls to val_print.
1498
1499 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
1500
1501         * ada-valprint.c (ada_val_print_1): Add parameter "language".
1502         Update calls to self accordingly.  Replace calls to c_val_print
1503         by calls to val_print.
1504
1505 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
1506
1507         * ada-valprint.c (print_record): Delete declaration.
1508         (adjust_type_signedness, ada_val_print_1): Likewise.
1509         (ada_val_print): Move function implementation down.
1510         (print_variant_part, print_field_values, print_record):
1511         Move function implementation up.
1512
1513 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
1514
1515         * python/py-type.c (typy_get_name): New function.
1516         (type_object_getset): Add entry for attribute "name".
1517         * NEWS: Add entry mentioning this new attribute.
1518
1519 2014-01-07  Yao Qi  <yao@codesourcery.com>
1520
1521         * gnu-nat.c (set_exceptions_cmd): Remove an empty body 'if'
1522         statement.
1523
1524 2014-01-07  Yao Qi  <yao@codesourcery.com>
1525
1526         * gnu-nat.c (info_port_rights): Add qualifier const to
1527         argument args.
1528
1529 2014-01-07  Yao Qi  <yao@codesourcery.com>
1530
1531         * gnu-nat.c (trace_me): Use 'void' for empty argument list.
1532
1533 2014-01-07  Yao Qi  <yao@codesourcery.com>
1534
1535         * gnu-nat.c (make_inf) Update declaration.
1536         (make_inf): Make it static.
1537         (inf_set_traced): Likewise.
1538         (inf_port_to_thread, inf_task_died_status): Likewise.
1539
1540 2014-01-07  Yao Qi  <yao@codesourcery.com>
1541
1542         * gnu-nat.c (inf_tid_to_proc): Remove declaration.
1543
1544 2014-01-07  Yao Qi  <yao@codesourcery.com>
1545
1546         * gnu-nat.c (_initialize_gnu_nat): Declare.
1547
1548 2014-01-07  Yao Qi  <yao@codesourcery.com>
1549
1550         * gdbarch.sh (byte_order, byte_order_for_code): Change type to
1551         'enum bfd_endian'.
1552         (struct gdbarch_info) <byte_order>: Change type to
1553         'enum bfd_endian'.
1554         <byte_order_for_code>: Likewise.
1555         * gdbarch.c, gdbarch.h: Regenerated.
1556
1557 2014-01-06  Sasha Smundak  <asmundak@google.com>
1558
1559         * jit.c: (jit_reader_load_command): Fix JIT reader path creation.
1560
1561 2014-01-06  Tom Tromey  <tromey@redhat.com>
1562
1563         * doublest.c (convert_doublest_to_floatformat): Use const, not
1564         CONST.
1565         * somread.c (som_symtab_read): Likewise.
1566
1567 2014-01-07  Hui Zhu  <hui@codesourcery.com>
1568
1569         * gdb_bfd.c (gdb_bfd_stash_filename): Removed.
1570         (gdb_bfd_open): Removed gdb_bfd_stash_filename.
1571         (gdb_bfd_fopen): Ditto.
1572         (gdb_bfd_openr): Ditto.
1573         (gdb_bfd_openw): Ditto.
1574         (gdb_bfd_openr_iovec): Ditto.
1575         (gdb_bfd_fdopenr): Ditto.
1576         * gdb_bfd.h (gdb_bfd_stash_filename): Removed.
1577         * solib-aix.c (solib_aix_bfd_open): Alloc object_bfd->filename
1578         with xstrdup.
1579         * solib-darwin.c (darwin_bfd_open): Alloc res->filename
1580         with xstrdup.
1581         * symfile-mem.c (symbol_file_add_from_memory): Removed
1582         gdb_bfd_stash_filename.
1583
1584 2014-01-03  Doug Evans  <dje@google.com>
1585
1586         * nat/linux-waitpid.c (linux_debug): Remove extraneous \n from
1587         output.
1588
1589 2014-01-01  Joel Brobecker  <brobecker@adacore.com>
1590
1591         Update year range in copyright notice of all files.
1592
1593 2014-01-01  Joel Brobecker  <brobecker@adacore.com>
1594
1595         * top.c (print_gdb_version): Set copyright year to 2014.
1596
1597 2014-01-01  Joel Brobecker  <brobecker@adacore.com>
1598
1599         * config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2013.
1600
1601 For older changes see ChangeLog-2013.
1602 \f
1603 Local Variables:
1604 mode: change-log
1605 left-margin: 8
1606 fill-column: 74
1607 version-control: never
1608 coding: utf-8
1609 End: