1 2014-02-12 Sanimir Agovic <sanimir.agovic@intel.com>
3 * tic6x-tdep.c (tic6x_gdbarch_init): Call frame_base_set_default.
5 2014-02-12 Mark Kettenis <kettenis@gnu.org>
7 * obsd-tdep.h (obsd_init_abi): New prototype.
8 * obsd-tdep.c: Define enum with OpenBSD signal numbers.
9 (obsd_gdb_signal_from_target, obsd_gdb_signal_to_target)
10 (obsd_init_abi): New functions.
11 * i386obsd-tdep.c: Include "obsd-tdep.h".
12 (i386obsd_init_abi): Call obsd_init_abi.
13 * amd64obsd-tdep.c: Include "obsd-tdep.h".
14 (amd64obsd_init_abi): Call obsd_init_abi.
15 * configure.tgt (i[34567]86-*-openbsd*, x86_64-*-openbsd*): Add
16 obsd-tdep.c to gdb_target_obs.
18 2014-02-11 Jose E. Marchesi <jose.marchesi@oracle.com>
20 * sparc64-tdep.c (sparc64_store_arguments): Do not align complex
21 double float arguments to 16-byte in the argument slots.
23 2014-02-11 Doug Evans <xdje42@gmail.com>
25 * configure.ac: Don't crash if pkg-config is not found and guile
26 wasn't explicitly requested. Use AC_MSG_ERROR instead of AC_ERROR
28 * configure: Regenerate.
30 2014-02-11 Yao Qi <yao@codesourcery.com>
32 * aix-thread.c (aix_thread_xfer_partial): Update comments.
33 * auxv.c (procfs_xfer_auxv, memory_xfer_auxv): Likewise.
34 * bsd-uthread.c (bsd_uthread_xfer_partial): Likewise.
35 * gnu-nat.c (gnu_xfer_memory): Likewise.
36 * inf-ptrace.c (inf_ptrace_xfer_partial): Likewise.
37 * rs6000-nat.c (rs6000_xfer_partial): Likewise.
38 * sparc-nat.c (sparc_xfer_wcookie): Likewise.
39 * spu-linux-nat.c (spu_proc_xfer_spu): Likewise.
41 2014-02-11 Yao Qi <yao@codesourcery.com>
43 * target.h (enum target_xfer_error): Rename to ...
44 (enum target_xfer_status): ... it. New. All users updated.
45 (enum target_xfer_status) <TARGET_XFER_OK>, <TARGET_XFER_EOF>:
47 (TARGET_XFER_STATUS_ERROR_P): New macro.
48 (target_xfer_error_to_string): Remove declaration.
49 (target_xfer_status_to_string): Declare.
50 (target_xfer_partial_ftype): Adjust it.
51 (struct target_ops) <to_xfer_partial>: Return
52 target_xfer_status. Add argument xfered_len. Update
54 * target.c (target_xfer_error_to_string): Rename to ...
55 (target_xfer_status_to_string): ... it. New. All callers
57 (target_read_live_memory): Likewise. Call target_xfer_partial
58 instead of target_read.
59 (memory_xfer_live_readonly_partial): Return
60 target_xfer_status. Add argument xfered_len.
61 (raw_memory_xfer_partial): Likewise.
62 (memory_xfer_partial_1): Likewise.
63 (memory_xfer_partial): Likewise.
64 (target_xfer_partial): Likewise. Check *XFERED_LEN is set
65 properly. Update debug message.
66 (default_xfer_partial, current_xfer_partial): Likewise.
67 (target_write_partial): Likewise.
68 (target_read_partial): Likewise. All callers updated.
69 (read_whatever_is_readable): Likewise.
70 (target_write_with_progress): Likewise.
71 (target_read_alloc_1): Likewise.
73 * aix-thread.c (aix_thread_xfer_partial): Likewise.
74 * auxv.c (procfs_xfer_auxv): Likewise.
75 (ld_so_xfer_auxv, memory_xfer_auxv): Likewise.
76 * bfd-target.c (target_bfd_xfer_partial): Likewise.
77 * bsd-kvm.c (bsd_kvm_xfer_partial): Likewise.
78 * bsd-uthread.c (bsd_uthread_xfer_partia): Likewise.
79 * corefile.c (read_memory): Adjust.
80 * corelow.c (core_xfer_partial): Likewise.
81 * ctf.c (ctf_xfer_partial): Likewise.
82 * darwin-nat.c (darwin_read_dyld_info): Likewise. All callers
84 (darwin_xfer_partial): Likewise.
85 * exec.c (section_table_xfer_memory_partial): Likewise. All
87 (exec_xfer_partial): Likewise.
88 * exec.h (section_table_xfer_memory_partial): Update
90 * gnu-nat.c (gnu_xfer_memory): Likewise. Assert 'res' is not
92 (gnu_xfer_partial): Likewise.
93 * ia64-hpux-nat.c (ia64_hpux_xfer_memory_no_bs): Likewise.
94 (ia64_hpux_xfer_memory, ia64_hpux_xfer_uregs): Likewise.
95 (ia64_hpux_xfer_solib_got): Likewise.
96 * inf-ptrace.c (inf_ptrace_xfer_partial): Likewise. Change
97 type of 'partial_len' to ULONGEST.
98 * inf-ttrace.c (inf_ttrace_xfer_partial): Likewise.
99 * linux-nat.c (linux_xfer_siginfo ): Likewise.
100 (linux_nat_xfer_partial): Likewise.
101 (linux_proc_xfer_partial, linux_xfer_partial): Likewise.
102 (linux_proc_xfer_spu, linux_nat_xfer_osdata): Likewise.
103 * monitor.c (monitor_xfer_memory): Likewise.
104 (monitor_xfer_partial): Likewise.
105 * procfs.c (procfs_xfer_partial): Likewise.
106 * record-btrace.c (record_btrace_xfer_partial): Likewise.
107 * record-full.c (record_full_xfer_partial): Likewise.
108 (record_full_core_xfer_partial): Likewise.
109 * remote-sim.c (gdbsim_xfer_memory): Likewise.
110 (gdbsim_xfer_partial): Likewise.
111 * remote.c (remote_write_bytes_aux): Likewise. All callers
113 (remote_write_bytes, remote_read_bytes): Likewise. All
115 (remote_flash_erase): Likewise. All callers updated.
116 (remote_write_qxfer): Likewise. All callers updated.
117 (remote_read_qxfer): Likewise. All callers updated.
118 (remote_xfer_partial): Likewise.
119 * rs6000-nat.c (rs6000_xfer_partial): Likewise.
120 (rs6000_xfer_shared_libraries): Likewise.
121 * sol-thread.c (sol_thread_xfer_partial): Likewise.
122 (sol_thread_xfer_partial): Likewise.
123 * sparc-nat.c (sparc_xfer_wcookie): Likewise.
124 (sparc_xfer_partial): Likewise.
125 * spu-linux-nat.c (spu_proc_xfer_spu): Likewise. All callers
127 (spu_xfer_partial): Likewise.
128 * spu-multiarch.c (spu_xfer_partial): Likewise.
129 * tracepoint.c (tfile_xfer_partial): Likewise.
130 * windows-nat.c (windows_xfer_memory): Likewise.
131 (windows_xfer_shared_libraries): Likewise.
132 (windows_xfer_partial): Likewise.
133 * valprint.c: Replace 'target_xfer_error' with
134 'target_xfer_status' in comments.
136 2014-02-11 Simon Marchi <simon.marchi@ericsson.com> (tiny patch)
138 Checked in by Joel Brobecker <brobecker@adacore.com>.
139 * mi/mi-main.c (mi_cmd_data_write_memory_bytes): Fix comment.
141 2014-02-11 Joel Brobecker <brobecker@adacore.com>
143 * symfile-debug.c (debug_qf_expand_symtabs_matching): Reformat
146 2014-02-10 Will Newton <will.newton@linaro.org>
148 * elfread.c (elf_rel_plt_read): Look for a .got section if
149 looking up .got.plt fails.
150 (elf_gnu_ifunc_resolve_by_got): Call gdbarch_addr_bits_remove
151 on address passed to elf_gnu_ifunc_record_cache.
152 (elf_gnu_ifunc_resolve_addr): Likewise.
153 (elf_gnu_ifunc_resolver_return_stop): Likewise.
155 2014-02-10 Jose E. Marchesi <jose.marchesi@oracle.com>
157 * sparc-tdep.c (sparc_in_function_epilogue_p): New function.
158 (X_RETTURN): New macro.
159 * sparc-tdep.h: sparc_in_function_epilogue_p prototype.
161 * sparc64-tdep.c (sparc64_init_abi): Hook
162 sparc_in_function_epilogue_p.
164 2014-02-10 Gary Benson <gbenson@redhat.com>
166 * symfile-debug.c (debug_qf_expand_symtabs_matching):
167 Rename name_matcher to symbol_matcher.
169 2014-02-10 Gary Benson <gbenson@redhat.com>
171 * symfile-debug.c (debug_qf_expand_symtabs_matching):
172 Use expand_symtabs_file_matcher_ftype and
173 expand_symtabs_symbol_matcher_ftype.
175 2014-02-10 Joel Brobecker <brobecker@adacore.com>
177 * ada-lang.c (struct cache_entry, HASH_SIZE): Move definition up.
178 (struct ada_symbol_cache): New.
179 (ada_free_symbol_cache): Forward declare.
180 (struct ada_pspace_data): New.
181 (ada_pspace_data_handle): New static global.
182 (get_ada_pspace_data, ada_pspace_data_cleanup)
183 (ada_init_symbol_cache, ada_free_symbol_cache): New functions.
184 (cache_space, cache): Delete, now folded inside struct
186 (ada_get_symbol_cache): New function.
187 (ada_clear_symbol_cache, find_entry, cache_symbol): Adjust
189 (_initialize_ada_language): Remove initialization of cache_space.
190 Move call to observer_attach_inferior_exit up, grouping it
191 with the other observer registrations inside this function.
192 Rename command to be more general. Add call to
193 register_program_space_data_with_cleanup.
195 2014-02-10 Joel Brobecker <brobecker@adacore.com>
197 * ada-tasks.c (ada_tasks_new_objfile_observer): Renames
198 ada_new_objfile_observer.
199 (ada_tasks_normal_stop_observer): Renames ada_normal_stop_observer.
200 (_initialize_tasks): Update uses of ada_new_objfile_observer
201 and ada_tasks_normal_stop_observer.
203 2014-02-10 Joel Brobecker <brobecker@adacore.com>
205 * ada-lang.c (ada_evaluate_subexp): Set the type of the value
206 returned by the 'Length attribute to integer.
208 2014-02-10 Joel Brobecker <brobecker@adacore.com>
210 * ada-lang.c (_initialize_ada_language): Initialize
213 2014-02-10 Joel Brobecker <brobecker@adacore.com>
215 * ada-lang.c (HASH_SIZE): New macro.
216 (struct cache_entry): New type.
217 (cache_space, cache): New static globals.
218 (ada_clear_symbol_cache, find_entry): New functions.
219 (lookup_cached_symbol, cache_symbol): Implement.
220 (ada_new_objfile_observer, ada_free_objfile_observer): New.
221 (_initialize_ada_language): Attach ada_new_objfile_observer
222 and ada_free_objfile_observer.
224 2014-02-10 Joel Brobecker <brobecker@adacore.com>
226 * ada-lang.c (ada_add_block_symbols, add_defn_to_vec)
227 (lookup_cached_symbol, ada_add_local_symbols): Add "const" to
228 struct block * parameter.
229 (ada_lookup_symbol_list_worker): Constify local variable "block".
230 Remove cast which is no longer necessary.
232 2014-02-10 Doug Evans <xdje42@gmail.com>
234 Add Guile as an extension language.
235 * NEWS: Mention Guile scripting.
236 * Makefile.in (SUBDIR_GUILE_OBS): New variable.
237 (SUBDIR_GUILE_SRCS, SUBDIR_GUILE_DEPS): New variables
238 (SUBDIR_GUILE_LDFLAGS, SUBDIR_GUILE_CFLAGS): New variables.
239 (INTERNAL_CPPFLAGS): Add GUILE_CPPFLAGS.
240 (CLIBS): Add GUILE_LIBS.
241 (install-guile): New rule.
243 (scm-arch.o, scm-auto-load.o, scm-block.o): New rules.
244 (scm-breakpoint.o, scm-disasm.o, scm-exception.o): New rules.
245 (scm-frame.o, scm-iterator.o, scm-lazy-string.o): New rules.
246 (scm-math.o, scm-objfile.o, scm-ports.o): New rules.
247 (scm-pretty-print.o, scm-safe-call.o, scm-gsmob.o): New rules.
248 (scm-string.o, scm-symbol.o, scm-symtab.o): New rules.
249 (scm-type.o, scm-utils.o, scm-value.o): New rules.
250 * configure.ac: New option --with-guile.
251 * configure: Regenerate.
252 * config.in: Regenerate.
253 * auto-load.c: Remove #include "python/python.h". Add #include
254 "gdb/section-scripts.h".
255 (source_section_scripts): Handle Guile scripts.
256 (_initialize_auto_load): Add name of Guile objfile script to
257 scripts-directory help text.
258 * breakpoint.c (condition_command): Tweak comment to include Scheme.
259 * breakpoint.h (gdbscm_breakpoint_object): Add forward decl.
260 (struct breakpoint): New member scm_bp_object.
261 * defs.h (enum command_control_type): New value guile_control.
262 * cli/cli-cmds.c: Remove #include "python/python.h". Add #include
264 (show_user): Update comment.
265 (_initialize_cli_cmds): Update help text for "show user". Update help
266 text for max-user-call-depth.
267 * cli/cli-script.c: Remove #include "python/python.h". Add #include
269 (multi_line_command_p): Add guile_control.
270 (print_command_lines): Handle guile_control.
271 (execute_control_command, recurse_read_control_structure): Ditto.
272 (process_next_line): Recognize "guile" commands.
273 * disasm.c (gdb_disassemble_info): Make non-static.
274 * disasm.h: #include "dis-asm.h".
275 (struct gdbarch): Add forward decl.
276 (gdb_disassemble_info): Declare.
277 * extension.c: #include "guile/guile.h".
278 (extension_languages): Add guile.
279 (get_ext_lang_defn): Handle EXT_LANG_GDB.
280 * extension.h (enum extension_language): New value EXT_LANG_GUILE.
281 * gdbtypes.c (get_unsigned_type_max): New function.
282 (get_signed_type_minmax): New function.
283 * gdbtypes.h (get_unsigned_type_max): Declare.
284 (get_signed_type_minmax): Declare.
285 * guile/README: New file.
286 * guile/guile-internal.h: New file.
287 * guile/guile.c: New file.
288 * guile/guile.h: New file.
289 * guile/scm-arch.c: New file.
290 * guile/scm-auto-load.c: New file.
291 * guile/scm-block.c: New file.
292 * guile/scm-breakpoint.c: New file.
293 * guile/scm-disasm.c: New file.
294 * guile/scm-exception.c: New file.
295 * guile/scm-frame.c: New file.
296 * guile/scm-gsmob.c: New file.
297 * guile/scm-iterator.c: New file.
298 * guile/scm-lazy-string.c: New file.
299 * guile/scm-math.c: New file.
300 * guile/scm-objfile.c: New file.
301 * guile/scm-ports.c: New file.
302 * guile/scm-pretty-print.c: New file.
303 * guile/scm-safe-call.c: New file.
304 * guile/scm-string.c: New file.
305 * guile/scm-symbol.c: New file.
306 * guile/scm-symtab.c: New file.
307 * guile/scm-type.c: New file.
308 * guile/scm-utils.c: New file.
309 * guile/scm-value.c: New file.
310 * guile/lib/gdb.scm: New file.
311 * guile/lib/gdb/boot.scm: New file.
312 * guile/lib/gdb/experimental.scm: New file.
313 * guile/lib/gdb/init.scm: New file.
314 * guile/lib/gdb/iterator.scm: New file.
315 * guile/lib/gdb/printing.scm: New file.
316 * guile/lib/gdb/types.scm: New file.
317 * data-directory/Makefile.in (GUILE_SRCDIR): New variable.
318 (VPATH): Add $(GUILE_SRCDIR).
319 (GUILE_DIR): New variable.
320 (GUILE_INSTALL_DIR, GUILE_FILES): New variables.
321 (all): Add stamp-guile dependency.
322 (stamp-guile): New rule.
323 (clean-guile, install-guile, uninstall-guile): New rules.
324 (install-only): Add install-guile dependency.
325 (uninstall): Add uninstall-guile dependency.
326 (clean): Add clean-guile dependency.
328 2014-02-09 Doug Evans <xdje42@gmail.com>
330 Revert this patch (which I approved, mea culpa).
332 2014-02-08 Mark Kettenis <kettenis@gnu.org>
334 * Makefile.in (all-lib): Remove.
335 ($(LIBGNU) $(GNULIB_H)): Replace with gits of remove all-lib target.
337 2014-02-09 Jan Kratochvil <jan.kratochvil@redhat.com>
339 Fix Python stack corruption.
340 * python/py-linetable.c (ltpy_get_pcs_for_line, ltpy_has_line): Use
343 2014-02-08 Mark Kettenis <kettenis@gnu.org>
345 * Makefile.in (all-lib): Remove.
346 ($(LIBGNU) $(GNULIB_H)): Replace with gits of remove all-lib target.
348 2014-02-07 Doug Evans <dje@google.com>
350 * extension-priv.h (extension_language_script_ops): Add comment.
351 (extension_language_ops): Add comment.
352 (active_ext_lang_state): Fix typo in comment.
354 2014-02-07 Pedro Alves <palves@redhat.com>
356 * infrun.c (handle_signal_stop) <signal arrives while stepping
357 over a breakpoint>: Switch back to the stepping thread.
359 2014-02-07 Yao Qi <yao@codesourcery.com>
361 * target.c (target_xfer_partial): Return zero if LEN is zero.
363 2014-02-07 Yao Qi <yao@codesourcery.com>
365 * auxv.c (procfs_xfer_auxv): Replace -1 with TARGET_XFER_E_IO.
366 (ld_so_xfer_auxv): Likewise.
367 * bfd-target.c (target_bfd_xfer_partial): Likewise.
368 * bsd-kvm.c (bsd_kvm_xfer_partial): Likewise.
369 * corelow.c (core_xfer_partial): Likewise.
370 * ctf.c (ctf_xfer_partial): Likewise.
371 * darwin-nat.c (darwin_read_dyld_info): Likewise.
372 (darwin_xfer_partial): Likewise.
373 * exec.c (exec_xfer_partial): Likewise.
374 * gnu-nat.c (gnu_xfer_partial): Likewise.
375 * ia64-hpux-nat.c (ia64_hpux_xfer_uregs): Likewise.
376 * inf-ptrace.c (inf_ptrace_xfer_partial): Likewise.
377 * inf-ttrace.c (inf_ttrace_xfer_partial): Likewise.
378 * linux-nat.c (linux_xfer_siginfo): Likewise.
379 (linux_proc_xfer_spu): Likewise.
380 * procfs.c (procfs_xfer_partial): Likewise.
381 * record-full.c (record_full_xfer_partial): Likewise.
382 (record_full_core_xfer_partial): Likewise.
383 * remote-sim.c (gdbsim_xfer_partial): Likewise.
384 * remote.c (remote_write_qxfer): Likewise.
385 (remote_write_qxfer, remote_read_qxfer): Likewise.
386 (remote_xfer_partial): Likewise.
387 * rs6000-nat.c (rs6000_xfer_partial): Likewise.
388 (rs6000_xfer_shared_libraries): Likewise.
389 * sparc-nat.c (sparc_xfer_wcookie): Likewise.
390 * spu-linux-nat.c (spu_proc_xfer_spu): Likewise.
391 (spu_xfer_partial): Likewise.
392 * target.c (memory_xfer_partial_1): Likewise.
393 * tracepoint.c (tfile_xfer_partial): Likewise.
394 * windows-nat.c (windows_xfer_shared_libraries): Likewise.
395 (windows_xfer_partial): Likewise.
397 2014-02-07 Yao Qi <yao@codesourcery.com>
399 * gdbarch.sh (core_xfer_shared_libraries): Returns ULONGEST. Add
401 (core_xfer_shared_libraries_aix): Likewise.
402 * gdbarch.c, gdbarch.h: Regenerated.
403 * i386-cygwin-tdep.c (windows_core_xfer_shared_libraries): Return
404 ULONGEST. Change 'len_avail' type to ULONGEST.
405 * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise.
406 * rs6000-aix-tdep.h (rs6000_aix_ld_info_to_xml): Update
408 (rs6000_aix_core_xfer_shared_libraries_aix): Return ULONGEST.
410 2014-02-07 Yao Qi <yao@codesourcery.com>
412 * corefile.c (memory_error): Get 'exception' from ERR and pass
413 'exception' to throw_error.
415 2014-02-06 Doug Evans <xdje42@gmail.com>
417 * configure.ac (libpython checking): Remove all but python.o from
418 CONFIG_OBS. Remove all but python.c from CONFIG_SRCS.
419 * configure: Regenerate.
421 * Makefile.in (SFILES): Add extension.c.
422 (HFILES_NO_SRCDIR): Add extension.h, extension-priv.h
423 (COMMON_OBS): Add extension.o.
424 * extension.h: New file.
425 * extension-priv.h: New file.
426 * extension.c: New file.
428 * python/python-internal.h: #include "extension.h".
429 (gdbpy_auto_load_enabled): Declare.
430 (gdbpy_apply_val_pretty_printer): Declare.
431 (gdbpy_apply_frame_filter): Declare.
432 (gdbpy_preserve_values): Declare.
433 (gdbpy_breakpoint_cond_says_stop): Declare.
434 (gdbpy_breakpoint_has_cond): Declare.
435 (void source_python_script_for_objfile): Delete.
436 * python/python.c: #include "extension-priv.h".
437 Delete inclusion of "observer.h".
438 (extension_language_python): Moved here and renamed from
439 script_language_python in py-auto-load.c.
440 Redefined to be of type extension_language_defn.
441 (python_extension_script_ops): New global.
442 (python_extension_ops): New global.
443 (struct python_env): New member previous_active.
444 (restore_python_env): Call restore_active_ext_lang.
445 (ensure_python_env): Call set_active_ext_lang.
446 (gdbpy_clear_quit_flag): Renamed from clear_quit_flag, made static.
448 (gdbpy_set_quit_flag): Renamed from set_quit_flag, made static.
450 (gdbpy_check_quit_flag): Renamed from check_quit_flag, made static.
452 (gdbpy_eval_from_control_command): Renamed from
453 eval_python_from_control_command, made static. New arg extlang.
454 (gdbpy_source_script) Renamed from source_python_script, made static.
456 (gdbpy_before_prompt_hook): Renamed from before_prompt_hook. Change
457 result to int. New arg extlang.
458 (gdbpy_source_objfile_script): Renamed from
459 source_python_script_for_objfile, made static. New arg extlang.
460 (gdbpy_start_type_printers): Renamed from start_type_printers, made
461 static. New args extlang, extlang_printers. Change result type to
463 (gdbpy_apply_type_printers): Renamed from apply_type_printers, made
464 static. New arg extlang. Rename arg printers to extlang_printers
465 and change type to ext_lang_type_printers *.
466 (gdbpy_free_type_printers): Renamed from free_type_printers, made
467 static. Replace argument arg with extlang, extlang_printers.
468 (!HAVE_PYTHON, eval_python_from_control_command): Delete.
469 (!HAVE_PYTHON, source_python_script): Delete.
470 (!HAVE_PYTHON, gdbpy_should_stop): Delete.
471 (!HAVE_PYTHON, gdbpy_breakpoint_has_py_cond): Delete.
472 (!HAVE_PYTHON, start_type_printers): Delete.
473 (!HAVE_PYTHON, apply_type_printers): Delete.
474 (!HAVE_PYTHON, free_type_printers): Delete.
475 (_initialize_python): Delete call to observer_attach_before_prompt.
476 (finalize_python): Set/restore active extension language.
477 (gdbpy_finish_initialization) Renamed from
478 finish_python_initialization, made static. New arg extlang.
479 (gdbpy_initialized): New function.
480 * python/python.h: #include "extension.h". Delete #include
481 "value.h", "mi/mi-cmds.h".
482 (extension_language_python): Declare.
483 (GDBPY_AUTO_FILE_NAME): Delete.
484 (enum py_bt_status): Moved to extension.h and renamed to
486 (enum frame_filter_flags): Moved to extension.h.
487 (enum py_frame_args): Moved to extension.h and renamed to
489 (finish_python_initialization): Delete.
490 (eval_python_from_control_command): Delete.
491 (source_python_script): Delete.
492 (apply_val_pretty_printer): Delete.
493 (apply_frame_filter): Delete.
494 (preserve_python_values): Delete.
495 (gdbpy_script_language_defn): Delete.
496 (gdbpy_should_stop, gdbpy_breakpoint_has_py_cond): Delete.
497 (start_type_printers, apply_type_printers, free_type_printers): Delete.
499 * auto-load.c: #include "extension.h".
500 (GDB_AUTO_FILE_NAME): Delete.
501 (auto_load_gdb_scripts_enabled): Make public. New arg extlang.
502 (script_language_gdb): Delete, moved to extension.c and renamed to
503 extension_language_gdb.
504 (source_gdb_script_for_objfile): Delete.
505 (auto_load_pspace_info): New member unsupported_script_warning_printed.
506 (loaded_script): Change type of language member to
507 struct extension_language_defn *.
508 (init_loaded_scripts_info): Initialize
509 unsupported_script_warning_printed.
510 (maybe_add_script): Make static. Change type of language arg to
511 struct extension_language_defn *.
512 (clear_section_scripts): Reset unsupported_script_warning_printed.
513 (auto_load_objfile_script_1): Rewrite to use extension language API.
514 (auto_load_objfile_script): Make public. Remove support-compiled-in
515 and auto-load-enabled checks, moved to auto_load_scripts_for_objfile.
516 (source_section_scripts): Rewrite to use extension language API.
517 (load_auto_scripts_for_objfile): Rewrite to use
518 auto_load_scripts_for_objfile.
519 (collect_matching_scripts_data): Change type of language member to
520 struct extension_language_defn *.
521 (auto_load_info_scripts): Change type of language arg to
522 struct extension_language_defn *.
523 (unsupported_script_warning_print): New function.
524 (script_not_found_warning_print): Make static.
525 (_initialize_auto_load): Rewrite construction of scripts-directory
527 * auto-load.h (struct objfile): Add forward decl.
528 (struct script_language): Delete.
529 (struct auto_load_pspace_info): Add forward decl.
530 (struct extension_language_defn): Add forward decl.
531 (maybe_add_script): Delete.
532 (auto_load_objfile_script): Declare.
533 (script_not_found_warning_print): Delete.
534 (auto_load_info_scripts): Update prototype.
535 (auto_load_gdb_scripts_enabled): Declare.
536 * python/py-auto-load.c (gdbpy_auto_load_enabled): Renamed from
537 auto_load_python_scripts_enabled and made public.
538 (script_language_python): Delete, moved to python.c.
539 (gdbpy_script_language_defn): Delete.
540 (info_auto_load_python_scripts): Update to use
541 extension_language_python.
543 * breakpoint.c (condition_command): Replace call to
544 gdbpy_breakpoint_has_py_cond with call to get_breakpoint_cond_ext_lang.
545 (bpstat_check_breakpoint_conditions): Replace call to gdbpy_should_stop
546 with call to breakpoint_ext_lang_cond_says_stop.
547 * python/py-breakpoint.c (gdbpy_breakpoint_cond_says_stop): Renamed
548 from gdbpy_should_stop. Change result type to enum scr_bp_stop.
549 New arg slang. Return SCR_BP_STOP_UNSET if py_bp_object is NULL.
550 (gdbpy_breakpoint_has_cond): Renamed from gdbpy_breakpoint_has_py_cond.
552 (local_setattro): Print name of extension language with existing
555 * valprint.c (val_print, value_print): Update to call
556 apply_ext_lang_val_pretty_printer.
557 * cp-valprint.c (cp_print_value): Update call to
558 apply_ext_lang_val_pretty_printer.
559 * python/py-prettyprint.c: Remove #ifdef HAVE_PYTHON.
560 (gdbpy_apply_val_pretty_printer): Renamed from
561 apply_val_pretty_printer. New arg extlang.
562 (!HAVE_PYTHON, apply_val_pretty_printer): Delete.
564 * cli/cli-cmds.c (source_script_from_stream): Rewrite to use
565 extension language API.
566 * cli/cli-script.c (execute_control_command): Update to call
567 eval_ext_lang_from_control_command.
569 * mi/mi-cmd-stack.c (mi_cmd_stack_list_frames): Update to use
570 enum ext_lang_bt_status values. Update call to
571 apply_ext_lang_frame_filter.
572 (mi_cmd_stack_list_locals): Ditto.
573 (mi_cmd_stack_list_args): Ditto.
574 (mi_cmd_stack_list_variables): Ditto.
575 * mi/mi-main.c: Delete #include "python/python-internal.h".
576 Add #include "extension.h".
577 (mi_cmd_list_features): Replace reference to python internal variable
578 gdb_python_initialized with call to ext_lang_initialized_p.
580 * stack.c (backtrace_command_1): Update to use enum ext_lang_bt_status.
581 Update to use enum ext_lang_frame_args. Update to call
582 apply_ext_lang_frame_filter.
583 * python/py-framefilter.c (extract_sym): Update to use enum
585 (extract_value, py_print_type, py_print_value): Ditto.
586 (py_print_single_arg, enumerate_args, enumerate_locals): Ditto.
587 (py_mi_print_variables, py_print_locals, py_print_args): Ditto.
588 (py_print_frame): Ditto.
589 (gdbpy_apply_frame_filter): Renamed from apply_frame_filter.
590 New arg extlang. Update to use enum ext_lang_bt_status.
592 * top.c (gdb_init): Delete #ifdef HAVE_PYTHON call to
593 finish_python_initialization. Replace with call to
594 finish_ext_lang_initialization.
596 * typeprint.c (do_free_global_table): Update to call
597 free_ext_lang_type_printers.
598 (create_global_typedef_table): Update to call
599 start_ext_lang_type_printers.
600 (find_global_typedef): Update to call apply_ext_lang_type_printers.
601 * typeprint.h (struct ext_lang_type_printers): Add forward decl.
602 (type_print_options): Change type of global_printers from "void *"
603 to "struct ext_lang_type_printers *".
605 * value.c (preserve_values): Update to call preserve_ext_lang_values.
606 * python/py-value.c: Remove #ifdef HAVE_PYTHON.
607 (gdbpy_preserve_values): Renamed from preserve_python_values.
609 (!HAVE_PYTHON, preserve_python_values): Delete.
611 * utils.c (quit_flag): Delete, moved to extension.c.
612 (clear_quit_flag, set_quit_flag, check_quit_flag): Delete, moved to
615 * eval.c: Delete #include "python/python.h".
616 * main.c: Delete #include "python/python.h".
618 * defs.h: Update comment.
620 2014-02-06 Joel Brobecker <brobecker@adacore.com>
624 2014-02-05 Mark Kettenis <kettenis@gnu.org>
626 * c-exp.y (YYPRINT, c_print_token): Only define if YYBISON is
629 2014-02-05 Yao Qi <yao@codesourcery.com>
631 * remote.c (remote_pass_signals): Remove local 'buf' and use
633 (remote_program_signals): Likewise.
635 2014-02-05 Yao Qi <yao@codesourcery.com>
637 * ctf.c: Include "inferior.h" and "gdbthread.h".
638 (CTF_PID): A new macro.
639 (ctf_open): Call inferior_appeared and add_thread_silent.
640 (ctf_close): Call exit_inferior_silent and set inferior_ptid.
641 (ctf_thread_alive): New function.
642 (init_ctf_ops): Install ctf_thread_alive to to_thread_alive.
644 2014-02-05 Yao Qi <yao@codesourcery.com>
648 2013-05-24 Yao Qi <yao@codesourcery.com>
650 * tracepoint.c (TFILE_PID): Remove.
651 (tfile_open): Don't add thread and inferior.
652 (tfile_close): Don't set 'inferior_ptid'. Don't call
653 exit_inferior_silent.
654 (tfile_thread_alive): Remove.
655 (init_tfile_ops): Don't set field 'to_thread_alive' of
658 2014-02-04 Christian Eggers <ceggers@gmx.de> (tiny change)
660 * remote.c (remote_start_remote): Call remote_check_symbols even
661 if only symbol-file (not file) has been given.
663 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
665 * gdbarch.sh (skip_entrypoint): New callback.
666 * gdbarch.c, gdbarch.h: Regenerate.
667 * symtab.c (skip_prologue_sal): Call gdbarch_skip_entrypoint.
668 * infrun.c (fill_in_stop_func): Likewise.
669 * ppc-linux-tdep.c: Include "elf/ppc64.h".
670 (ppc_elfv2_elf_make_msymbol_special): New function.
671 (ppc_elfv2_skip_entrypoint): Likewise.
672 (ppc_linux_init_abi): Install them for ELFv2.
674 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
676 * ppc-sysv-tdep.c (ppc64_aggregate_candidate): New routine.
677 (ppc64_elfv2_abi_homogeneous_aggregate): Likewise.
678 (ppc64_sysv_abi_push_param): Handle ELFv2 homogeneous structs.
679 (ppc64_sysv_abi_return_value): Likewise. Also, handle small
680 structures returned in GPRs.
682 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
684 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): Use correct
685 offset to the stack parameter list for the ELFv2 ABI.
687 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
689 * ppc-linux-tdep.c (ppc_linux_init_abi): Only call
690 set_gdbarch_convert_from_func_ptr_addr and
691 set_gdbarch_elf_make_msymbol_special for ELFv1.
692 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_param): Only handle
693 function descriptors on ELFv1.
694 (ppc64_sysv_abi_push_dummy_call): Likewise. On ELFv2,
695 set up r12 at function entry.
697 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
699 * ppc-tdep.h (enum powerpc_elf_abi): New data type.
700 (struct gdbarch_tdep): New member elf_abi.
702 * rs6000-tdep.c: Include "elf/ppc64.h".
703 (rs6000_gdbarch_init): Detect ELF ABI version.
705 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
707 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_freg): Use correct order
708 within a register pair holding a DFP 128-bit value on little-endian.
709 (ppc64_sysv_abi_return_value_base): Likewise.
710 * rs6000-tdep.c (dfp_pseudo_register_read): Likewise.
711 (dfp_pseudo_register_write): Likewise.
713 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
715 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_freg): Use correct
716 offset on little-endian when passing _Decimal32.
717 (ppc64_sysv_abi_return_value_base): Likewise for return values.
719 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
721 * rs6000-tdep.c (efpr_pseudo_register_read): Use correct offset
722 of the overlapped FP register within the VSX register on little-
724 (efpr_pseudo_register_write): Likewise.
726 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
728 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_val): Use correct
729 offset on little-endian when passing small structures.
731 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
733 * ppc-sysv-tdep.c (get_decimal_float_return_value): Update comment.
734 (struct ppc64_sysv_argpos): New data structure.
735 (ppc64_sysv_abi_push_float): Remove.
736 (ppc64_sysv_abi_push_val): New function.
737 (ppc64_sysv_abi_push_integer): Likewise.
738 (ppc64_sysv_abi_push_freg): Likewise.
739 (ppc64_sysv_abi_push_vreg): Likewise.
740 (ppc64_sysv_abi_push_param): Likewise.
741 (ppc64_sysv_abi_push_dummy_call): Refactor to use those new routines.
742 (ppc64_sysv_abi_return_value_base): New function.
743 (ppc64_sysv_abi_return_value): Refactor to use it.
745 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
747 * NEWS: Document new target powerpc64le-*-linux*.
749 2014-02-04 Mark Kettenis <kettenis@gnu.org>
751 * sparc64obsd-tdep.c (sparc64obsd_gregset): New variable.
752 (sparc64obsd_supply_gregset): Handle registers sets used in ELF
754 (sparc64obsd_init_abi): Adjust minimum size of the general purpose
755 register set used in ELF core dumps. Add floating-point register set.
757 2014-02-03 Kevin Buettner <kevinb@redhat.com>
759 * mn10300-tdep.c (mn10300_dwarf2_reg_to_regnum): Rewrite
760 dwarf2_to_gdb[] table using symbolic constants. Adjust
761 penultimate entry from number representing the PC register
762 to symbolic constant representing the MDR register. Add
763 constant for the PC register to the end of the table.
765 2014-02-03 Mark Kettenis <kettenis@gnu.org>
767 * bsd-kvm.c: Include <sys/param.h>
769 2014-02-03 Mark Kettenis <kettenis@gnu.org>
771 * sparc64nbsd-nat.c (sparc64nbsd_supply_fpregset): Fix prototype.
773 2014-01-31 Joel Brobecker <brobecker@adacore.com>
775 * ada-lang.h (clear_ada_sym_cache): Delete.
777 2014-01-30 Ulrich Weigand <uweigand@de.ibm.com>
779 * auxv.c (fprint_target_auxv): Handle AT_HWCAP2.
781 2014-01-29 Jose E. Marchesi <jose.marchesi@oracle.com>
783 * sparc64-linux-tdep.c (sparc64_linux_step_trap): Get PC from
784 the sigreturn register save area only if the syscall is
787 2014-01-29 Joel Brobecker <brobecker@adacore.com>
789 * valops.c (value_slice): Minor reformatting.
791 2014-01-28 Ulrich Weigand <uweigand@de.ibm.com>
793 * ppc64-tdep.c (ppc64_standard_linkage7): Fix typo.
795 2014-01-28 Joel Brobecker <brobecker@adacore.com>
797 * ada-lang.c (maint_set_ada_cmdlist, maint_show_ada_cmdlist):
799 (maint_set_ada_cmd, maint_show_ada_cmd): New functions.
800 (ada_ignore_descriptive_types_p): New static global.
801 (find_parallel_type_by_descriptive_type): Return immediately
802 if ada_ignore_descriptive_types_p is set.
803 (_initialize_ada_language): Register new commands "maintenance
804 set ada", "maintenance show ada", "maintenance set ada
805 ignore-descriptive-types" and "maintenance show ada
806 ignore-descriptive-types".
807 * NEWS: Add entry for new "maint ada set/show
808 ignore-descriptive-types" commands.
810 2014-01-27 Markus Metzger <markus.t.metzger@intel.com>
812 * record-btrace.c (record_btrace_close): Call btrace_teardown
815 2014-01-27 Joel Brobecker <brobecker@adacore.com>
817 * ada-lang.c: Remove "#ifdef UI_OUT" condition for including
820 2014-01-27 Joel Brobecker <brobecker@adacore.com>
822 * ada-typeprint (type_is_full_subrange_of_target_type):
824 (print_range): Add parameter bounds_prefered_p. If not set,
825 try printing range types using the name of their base type.
826 (print_range_type): Add parameter bounds_prefered_p.
827 Use it in call to print_range.
828 (print_array_type, ada_print_type): Update calls to print_range
829 and print_range_type.
831 2014-01-27 Joel Brobecker <brobecker@adacore.com>
833 * ada-typeprint.c (print_array_type, print_choices, print_range)
834 (print_range_bound, print_dynamic_range_bound, print_range_type):
837 2014-01-27 Joel Brobecker <brobecker@adacore.com>
839 * ada-typeprint.c (print_range): Add missing empty line
840 after local declaration.
842 2014-01-27 Joel Brobecker <brobecker@adacore.com>
844 * ada-valprint.c (print_optional_low_bound): Get index_type's
845 target type for as long as it is a TYPE_CODE_RANGE.
847 2014-01-27 Joel Brobecker <brobecker@adacore.com>
849 * procfs.c (procfs_make_note_section): Remove assertion and
852 2014-01-24 Yao Qi <yao@codesourcery.com>
854 * remote.c (remote_read_bytes): Change type of len to ULONGEST.
855 * corelow.c (get_core_siginfo): Likewise.
857 2014-01-24 Yao Qi <yao@codesourcery.com>
859 * remote.c (remote_write_bytes_aux): Change type of 'len' to
860 ULONGEST. Don't check 'len' is negative.
861 (remote_write_bytes): Change type of 'len' to ULONGEST.
863 2014-01-23 Tom Tromey <tromey@redhat.com>
866 * python/lib/gdb/FrameDecorator.py: (FrameVars.fetch_frame_args):
867 Handle exception from frame.block.
868 (FrameVars.fetch_frame_locals): Likewise.
870 2014-01-23 Tom Tromey <tromey@redhat.com>
873 * python/py-framefilter.c (py_print_frame): Don't call Py_DECREF
874 on a NULL pointer. Move "goto error" to correct place.
876 2014-01-23 Tom Tromey <tromey@redhat.com>
879 * python/py-framefilter.c (apply_frame_filter): Call
880 ensure_python_env after computing gdbarch.
882 2014-01-23 Yao Qi <yao@codesourcery.com>
884 * target.c (raw_memory_xfer_partial): Change argument type
885 from void * to gdb_byte *.
886 (memory_xfer_partial_1, memory_xfer_partial): Likewise.
888 2014-01-22 Doug Evans <dje@google.com>
890 New gdbserver option --debug-format=timestamp.
893 2014-01-22 Andreas Arnez <arnez@vnet.linux.ibm.com>
895 * syscalls/s390x-linux.xml: New file.
896 * syscalls/s390-linux.xml: New file.
897 * s390-linux-tdep.c (XML_SYSCALL_FILENAME_S390): New macro.
898 (XML_SYSCALL_FILENAME_S390X): Likewise.
899 (op_svc): New enum value for SVC opcode.
900 (s390_sigtramp_frame_sniffer): Replace literal by 'op_svc'.
901 (s390_linux_get_syscall_number): New function.
902 (s390_gdbarch_init): Register '*get_syscall_number' and the
903 syscall xml file name.
904 * data-directory/Makefile.in (SYSCALLS_FILES): Add
905 "s390-linux.xml" and "s390x-linux.xml".
906 * NEWS: Announce new feature.
908 2014-01-22 Baruch Siach <baruch@tkos.co.il>
910 * xtensa-tdep.h (xtensa_elf_greg_t): Change type to uint32_t.
912 2014-01-22 Pedro Alves <palves@redhat.com>
914 * xtensa-config.c: Include defs.h.
916 2014-01-22 Joel Brobecker <brobecker@adacore.com>
918 * common/common-utils.h: Add "ARI:" comment beside __func__
921 2014-01-22 Joel Brobecker <brobecker@adacore.com>
923 * common/common-utils.h (FUNCTION_NAME): Expand the macro's
926 2014-01-21 Roland McGrath <mcgrathr@google.com>
928 * configure.ac: Call AM_PROG_INSTALL_STRIP.
929 * configure: Regenerate.
930 * aclocal.m4: Regenerate.
931 * Makefile.in (install_sh, INSTALL_STRIP_PROGRAM, STRIP):
932 New substituted variables.
933 (install-strip): New target.
934 (INSTALL_SCRIPT): New substituted variable.
935 (FLAGS_TO_PASS): Add it.
936 (install-only): Use $(INSTALL_SCRIPT) rather than
937 $(INSTALL_PROGRAM) for gcore.
939 2014-01-20 Tom Tromey <tromey@redhat.com>
941 * cli/cli-decode.h (struct cmd_list_element): Move all bitfields
944 2014-01-20 Tom Tromey <tromey@redhat.com>
946 * cli/cli-decode.c (add_cmd, deprecate_cmd, add_alias_cmd)
947 (add_setshow_cmd_full, delete_cmd, lookup_cmd_1)
948 (deprecated_cmd_warning, complete_on_cmdlist): Update.
949 * cli/cli-decode.h (CMD_DEPRECATED, DEPRECATED_WARN_USER)
950 (MALLOCED_REPLACEMENT, DOC_ALLOCATED): Remove.
951 (struct cmd_list_element) <flags>: Remove.
952 <cmd_deprecated, deprecated_warn_user, malloced_replacement,
953 doc_allocated>: New fields.
954 <hook_in, allow_unknown, abbrev_flag, type, var_type>: Now
956 * maint.c (maintenance_do_deprecate): Update.
957 * top.c (execute_command): Update.
959 2014-01-20 Baruch Siach <baruch@tkos.co.il>
961 * xtensa-linux-nat.c: Include asm/ptrace.h.
963 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
965 * Makefile.in (SFILES): Add d-support.c.
966 (COMMON_OBS): Add d-support.o.
967 * d-lang.h (d_parse_symbol): Add comment, now defined in
969 * d-lang.c (parse_call_convention)
970 (parse_attributes, parse_function_types)
971 (parse_function_args, parse_type, parse_identifier)
972 (call_convention_p, d_parse_symbol): Move functions to ...
973 * d-support.c: ... New file.
975 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
977 * d-lang.h (d_parse_symbol): Add declaration.
978 * d-lang.c (extract_identifiers)
979 (extract_type_info): Remove functions.
980 (parse_call_convention, parse_attributes)
981 (parse_function_types, parse_function_args)
982 (parse_type, parse_identifier, call_convention_p)
983 (d_parse_symbol): New functions.
984 (d_demangle): Use d_parse_symbol to demangle D symbols.
986 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
988 * d-lang.h (struct builtin_d_type): New data type.
989 (builtin_d_type): Add declaration.
990 * d-lang.c (d_language_arch_info, build_d_types)
991 (builtin_d_type): New functions.
992 (enum d_primitive_types): New data type.
993 (d_language_defn): Change c_language_arch_info to
994 d_language_arch_info.
995 (d_type_data): New static variable.
996 (_initialize_d_language): Initialize d_type_data.
998 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
1000 * d-lang.h (d_main_name): Add declaration.
1001 * d-lang.c (d_main_name): New function.
1002 * symtab.c (find_main_name): Add call to d_main_name.
1004 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
1006 * d-lang.c (d_language_defn): Change macro_expansion_c to
1009 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
1011 * MAINTAINERS: Add myself as a write-after-approval maintainer.
1013 2014-01-17 Sergio Durigan Junior <sergiodj@redhat.com>
1015 * breakpoint.c (insert_bp_location): Add "volatile" keyword to "struct
1016 gdb_exception" declaration.
1017 * remote.c (getpkt_or_notif_sane): Likewise.
1019 2014-01-17 Doug Evans <dje@google.com>
1021 * common/gdb_vecs.c (delim_string_to_char_ptr_vec_append): New
1022 function, contents of dirnames_to_char_ptr_vec_append moved here.
1023 (delim_string_to_char_ptr_vec): New function.
1024 (dirnames_to_char_ptr_vec_append): Rewrite.
1025 * common/gdb_vecs.h (delim_string_to_char_ptr_vec): Declare.
1027 2014-01-17 Doug Evans <dje@google.com>
1029 * common/common-utils.h (FUNCTION_NAME): Renamed from ASSERT_FUNCTION,
1031 * common/gdb_assert.h (ASSERT_FUNCTION): ... from here.
1032 #include "common-utils.h".
1033 (gdb_assert, gdb_assert_fail, gdb_assert_not_reached): Update.
1034 * common/vec.h (VEC_ASSERT_PASS): Update.
1035 * darwin-nat.h: Replace #include of gdb_assert.h with common-utils.h.
1036 (MACH_CHECK_ERROR): Update.
1038 2014-01-17 Simon Marchi <simon.marchi@ericsson.com>
1040 * gdbarch.sh (gdbarch_address_class_name_to_type_flags): Add
1042 * gdbarch.h: Regenerate.
1044 2014-01-16 Tom Tromey <tromey@redhat.com>
1046 * value.c (struct value) <regnum>: Move earlier.
1048 2014-01-16 Tom Tromey <tromey@redhat.com>
1050 * remote.c (extended_remote_create_inferior): Rename from
1051 extended_remote_create_inferior_1. Add "ops" argument. Remove
1054 2014-01-16 Pedro Alves <palves@redhat.com>
1056 * s390-linux-tdep.c (s390_frame_unwind_cache): Swallow
1057 NOT_AVAILABLE_ERROR errors while parsing the prologue or reading
1060 2014-01-16 Doug Evans <dje@google.com>
1062 * dwarf2read.c (open_and_init_dwp_file): Fix typo in comment.
1064 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1066 * btrace.h (btrace_thread_flag): New.
1067 (struct btrace_thread_info) <flags>: New.
1068 * record-btrace.c (record_btrace_resume_thread)
1069 (record_btrace_find_thread_to_move, btrace_step_no_history)
1070 (btrace_step_stopped, record_btrace_start_replaying)
1071 (record_btrace_step_thread, record_btrace_decr_pc_after_break)
1072 (record_btrace_find_resume_thread): New.
1073 (record_btrace_resume, record_btrace_wait): Extend.
1074 (record_btrace_can_execute_reverse): New.
1075 (record_btrace_open): Fail in non-stop mode.
1076 (record_btrace_set_replay): Split into this, ...
1077 (record_btrace_stop_replaying): ... this, ...
1078 (record_btrace_clear_histories): ... and this.
1079 (init_record_btrace_ops): Init to_can_execute_reverse.
1080 * NEWS: Announce it.
1082 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1084 * target.h (struct target_ops) <to_decr_pc_after_break>: New.
1085 (forward_target_decr_pc_after_break)
1086 (target_decr_pc_after_break): New.
1087 * target.c (forward_target_decr_pc_after_break)
1088 (target_decr_pc_after_break): New.
1089 * aix-thread.c (aix_thread_wait): Call target_decr_pc_after_break
1090 instead of gdbarch_decr_pc_after_break.
1091 * darwin-nat.c (cancel_breakpoint): Call target_decr_pc_after_break
1092 instead of gdbarch_decr_pc_after_break.
1093 * infrun.c (adjust_pc_after_break): Call target_decr_pc_after_break
1094 instead of gdbarch_decr_pc_after_break.
1095 * linux-nat.c (cancel_breakpoint): Call target_decr_pc_after_break
1096 instead of gdbarch_decr_pc_after_break.
1097 * linux-thread-db.c (check_event): Call target_decr_pc_after_break
1098 instead of gdbarch_decr_pc_after_break.
1099 * record-full.c (record_full_wait_1): Call target_decr_pc_after_break
1100 instead of gdbarch_decr_pc_after_break.
1102 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1104 * btrace.c: Include regcache.h.
1105 (btrace_add_pc): New.
1106 (btrace_enable): Call btrace_add_pc.
1107 (btrace_is_empty): New.
1108 * btrace.h (btrace_is_empty): New.
1109 * record-btrace.c (require_btrace, record_btrace_info): Call
1112 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1114 * common/linux-btrace.c (perf_event_read_bts, linux_read_btrace):
1115 Support delta reads.
1116 (linux_disable_btrace): Change return type.
1117 * common/linux-btrace.h (linux_read_btrace): Change parameters
1118 and return type to allow error reporting. Update users.
1119 (linux_disable_btrace): Change return type. Update users.
1120 * common/btrace-common.h (btrace_read_type) <BTRACE_READ_DELTA>:
1122 (btrace_error): New.
1123 (btrace_block) <begin>: Comment on BEGIN == 0.
1124 * btrace.c (btrace_compute_ftrace): Start from the end of
1126 (btrace_stitch_trace, btrace_clear_history): New.
1127 (btrace_fetch): Read delta trace, return if replaying.
1128 (btrace_clear): Move clear history code to btrace_clear_history.
1129 (parse_xml_btrace): Throw an error if parsing failed.
1130 * target.h (struct target_ops) <to_read_btrace>: Change parameters
1131 and return type to allow error reporting.
1132 (target_read_btrace): Change parameters and return type to allow
1134 * target.c (target_read_btrace): Update.
1135 * remote.c (remote_read_btrace): Support delta reads. Pass
1137 * NEWS: Announce it.
1139 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1141 * record.h (record_btrace_frame_unwind)
1142 (record_btrace_tailcall_frame_unwind): New declarations.
1143 * dwarf2-frame: Include record.h
1144 (dwarf2_frame_cfa): Throw an error for btrace frames.
1145 * record-btrace.c: Include hashtab.h.
1146 (btrace_get_bfun_name): New.
1147 (btrace_call_history): Call btrace_get_bfun_name.
1148 (struct btrace_frame_cache): New.
1150 (bfcache_hash, bfcache_eq, bfcache_new): New.
1151 (btrace_get_frame_function): New.
1152 (record_btrace_frame_unwind_stop_reason): Allow unwinding.
1153 (record_btrace_frame_this_id): Compute own id.
1154 (record_btrace_frame_prev_register): Provide PC, throw_error
1155 for all other registers.
1156 (record_btrace_frame_sniffer): Detect btrace frames.
1157 (record_btrace_tailcall_frame_sniffer): New.
1158 (record_btrace_frame_dealloc_cache): New.
1159 (record_btrace_frame_unwind): Add new functions.
1160 (record_btrace_tailcall_frame_unwind): New.
1161 (_initialize_record_btrace): Allocate cache.
1162 * btrace.c (btrace_clear): Call reinit_frame_cache.
1163 * NEWS: Announce it.
1165 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1167 * record-btrace.c (record_btrace_set_replay)
1168 (record_btrace_goto_begin, record_btrace_goto_end)
1169 (record_btrace_goto): New.
1170 (init_record_btrace_ops): Initialize them.
1171 * NEWS: Announce it.
1173 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1175 * record-btrace.c (record_btrace_find_new_threads)
1176 (record_btrace_thread_alive): New.
1177 (init_record_btrace_ops): Initialize to_find_new_threads and
1180 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1182 * record-btrace.c (record_btrace_resume): New.
1183 (record_btrace_wait): New.
1184 (init_record_btrace_ops): Initialize to_wait and to_resume.
1186 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1188 * record-btrace.c (record_btrace_xfer_partial)
1189 (record_btrace_insert_breakpoint, record_btrace_remove_breakpoint)
1190 (record_btrace_allow_memory_access): New.
1191 (init_record_btrace_ops): Initialize new methods.
1192 * target.c (raw_memory_xfer_partial): Bail out if target reports
1193 that this memory is not available.
1195 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1197 * target.h (target_ops) <to_insert_breakpoint>
1198 <to_remove_breakpoint>: Add target_ops parameter.
1199 (forward_target_insert_breakpoint): New.
1200 (forward_target_remove_breakpoint): New.
1201 (memory_remove_breakpoint, memory_insert_breakpoint):
1202 Add target_ops parameter.
1203 * target.c (target_insert_breakpoint): Split into this and ...
1204 (forward_target_insert_breakpoint): ... this.
1205 (target_remove_breakpoint): Split into this and ...
1206 (forward_target_remove_breakpoint): ... this.
1207 (debug_to_insert_breakpoint): Add target_ops parameter.
1208 Call forward_target_insert_breakpoint.
1209 (debug_to_remove_breakpoint): Add target_ops parameter.
1210 Call forward_target_remove_breakpoint.
1211 (update_current_target): Do not inherit or default to_insert_breakpoint
1212 and to_remove_breakpoint.
1213 * corelow.c (ignore): Add target_ops parameter.
1214 * exec.c (ignore): Add target_ops parameter.
1215 * mem-break.c (memory_insert_breakpoint, memory_remove_breakpoint):
1216 Add target_ops parameter.
1217 * monitor.c (monitor_insert_breakpoint, monitor_remove_breakpoint):
1218 Add target_ops parameter.
1219 * nto-procfs.c (procfs_insert_breakpoint, procfs_remove_breakpoint):
1220 Add target_ops parameter.
1221 * record-full.c (record_full_beneath_to_insert_breakpoint)
1222 (record_full_beneath_to_remove_breakpoint, tmp_to_insert_breakpoint)
1223 (tmp_to_remove_breakpoint, record_full_insert_breakpoint)
1224 (record_full_remove_breakpoint, record_full_core_insert_breakpoint)
1225 (record_full_core_remove_breakpoint): Add target_ops parameter.
1227 (record_full_beneath_to_insert_breakpoint_ops)
1228 (record_full_beneath_to_remove_breakpoint_ops)
1229 (tmp_to_insert_breakpoint_ops, tmp_to_remove_breakpoint_ops): New.
1230 (record_full_open): Initialize tmp_to_insert_breakpoint_ops,
1231 tmp_to_remove_breakpoint_ops,
1232 record_full_beneath_to_insert_breakpoint_ops, and
1233 record_full_beneath_to_remove_breakpoint_ops.
1234 * remote-m32r-sdi.c (m32r_insert_breakpoint)
1235 (m32r_remove_breakpoint): Add target_ops parameter.
1236 * remote-mips.c (mips_insert_breakpoint, mips_remove_breakpoint):
1237 Add target_ops parameter.
1238 * remote.c (remote_insert_breakpoint, remote_remove_breakpoint):
1239 Add target_ops parameter.
1241 2014-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
1242 Markus Metzger <markus.t.metzger@intel.com>
1244 * record-btrace.c: Include frame-unwind.h.
1245 (record_btrace_frame_unwind_stop_reason)
1246 (record_btrace_frame_this_id, record_btrace_frame_prev_register)
1247 (record_btrace_frame_sniffer, record_btrace_frame_unwind):
1249 (init_record_btrace_ops): Install it.
1251 2014-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
1253 * frame.c (get_frame_unwind_stop_reason): Unconditionally call
1256 2014-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
1258 * dwarf2-frame.c (dwarf2_frame_cfa): Move UNWIND_UNAVAILABLE check
1261 2014-01-16 Jan Kratochvil <jan.kratochvil@redhat.com>
1263 * frame-unwind.c: Include target.h.
1264 (frame_unwind_try_unwinder): New function with code from ...
1265 (frame_unwind_find_by_frame): ... here. New variable
1266 unwinder_from_target, call also target_get_unwinder)
1267 (target_get_tailcall_unwinder, and frame_unwind_try_unwinder for it.
1268 * target.c (target_get_unwinder, target_get_tailcall_unwinder): New.
1269 * target.h (struct target_ops): New fields to_get_unwinder and
1270 to_get_tailcall_unwinder.
1271 (target_get_unwinder, target_get_tailcall_unwinder): New declarations.
1273 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1275 * record-btrace.c (record_btrace_fetch_registers)
1276 (record_btrace_store_registers)
1277 (record_btrace_to_prepare_to_store): New.
1278 (init_record_btrace_ops): Add the above.
1280 2014-01-16 Tom Tromey <tromey@redhat.com>
1282 * windows-nat.c (windows_prepare_to_store): Add 'self' argument.
1283 * target.h (struct target_ops) <to_prepare_to_store>: Add
1285 (target_prepare_to_store): Add argument.
1286 * target.c (debug_to_prepare_to_store): Add argument.
1287 (update_current_target): Update.
1288 * remote.c (remote_prepare_to_store): Add 'self' argument.
1289 * remote-sim.c (gdbsim_prepare_to_store): Add 'self' argument.
1290 * remote-mips.c (mips_prepare_to_store): Add 'self' argument.
1291 * remote-m32r-sdi.c (m32r_prepare_to_store): Add 'self' argument.
1292 * record-full.c (record_full_core_prepare_to_store): Add 'self'
1294 * ravenscar-thread.c (ravenscar_prepare_to_store): Add argument.
1295 * nto-procfs.c (procfs_prepare_to_store): Add 'self' argument.
1296 * monitor.c (monitor_prepare_to_store): Add 'self' argument.
1297 * inf-child.c (inf_child_prepare_to_store): Add 'self' argument.
1298 * go32-nat.c (go32_prepare_to_store): Add 'self' argument.
1300 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1302 * btrace.h (replay) <replay>: New.
1303 (btrace_is_replaying): New.
1304 * btrace.c (btrace_clear): Free replay iterator.
1305 (btrace_is_replaying): New.
1306 * record-btrace.c (record_btrace_is_replaying): New.
1307 (record_btrace_info): Print insn number if replaying.
1308 (record_btrace_insn_history): Start at replay position.
1309 (record_btrace_call_history): Start at replay position.
1310 (init_record_btrace_ops): Init to_record_is_replaying.
1312 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1314 * record-btrace.c (record_btrace_insn_history_range): Include
1316 (record_btrace_insn_history_from): Adjust range.
1317 (record_btrace_call_history_range): Include
1319 (record_btrace_call_history_from): Adjust range.
1320 * NEWS: Announce changes.
1322 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1324 * record.h (enum record_print_flag)
1325 <record_print_indent_calls>: New.
1326 * record.c (get_call_history_modifiers): Recognize /c modifier.
1327 (_initialize_record): Document /c modifier.
1328 * record-btrace.c (btrace_call_history): Add btinfo parameter.
1329 Reorder fields. Optionally indent the function name. Update
1331 * NEWS: Announce changes.
1333 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1335 * common/linux-btrace.c (linux_enable_btrace): Enlarge buffer.
1337 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1339 * btrace.c (ftrace_new_function): Start counting at one.
1340 * record-btrace.c (record_btrace_info): Adjust number of calls
1342 * NEWS: Announce it.
1344 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1346 * record-btrace.c (btrace_call_history_insn_range): Print
1347 insn range as [begin, end].
1349 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1351 * btrace.h (struct btrace_func_link): New.
1352 (enum btrace_function_flag): New.
1353 (struct btrace_inst): Rename to ...
1354 (struct btrace_insn): ...this. Update all users.
1355 (struct btrace_func) <ibegin, iend>: Remove.
1356 (struct btrace_func_link): New.
1357 (struct btrace_func): Rename to ...
1358 (struct btrace_function): ...this. Update all users.
1359 (struct btrace_function) <segment, flow, up, insn, insn_offset)
1360 (number, level, flags>: New.
1361 (struct btrace_insn_iterator): Rename to ...
1362 (struct btrace_insn_history): ...this.
1364 (struct btrace_insn_iterator, btrace_call_iterator): New.
1365 (struct btrace_target_info) <btrace, itrace, ftrace>: Remove.
1366 (struct btrace_target_info) <begin, end, level>
1367 <insn_history, call_history>: New.
1368 (btrace_insn_get, btrace_insn_number, btrace_insn_begin)
1369 (btrace_insn_end, btrace_insn_prev, btrace_insn_next)
1370 (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get)
1371 (btrace_call_number, btrace_call_begin, btrace_call_end)
1372 (btrace_call_prev, btrace_call_next, btrace_call_cmp)
1373 (btrace_find_function_by_number, btrace_set_insn_history)
1374 (btrace_set_call_history): New.
1375 * btrace.c (btrace_init_insn_iterator)
1376 (btrace_init_func_iterator, compute_itrace): Remove.
1377 (ftrace_print_function_name, ftrace_print_filename)
1378 (ftrace_skip_file): Change
1380 (ftrace_init_func): Remove.
1381 (ftrace_debug): Use new btrace_function fields.
1382 (ftrace_function_switched): Also consider gaining and
1383 losing symbol information).
1384 (ftrace_print_insn_addr, ftrace_new_call, ftrace_new_return)
1385 (ftrace_new_switch, ftrace_find_caller, ftrace_new_function)
1386 (ftrace_update_caller, ftrace_fixup_caller, ftrace_new_tailcall):
1388 (ftrace_new_function): Move. Remove debug print.
1389 (ftrace_update_lines, ftrace_update_insns): New.
1390 (ftrace_update_function): Check for call, ret, and jump.
1391 (compute_ftrace): Renamed to ...
1392 (btrace_compute_ftrace): ...this. Rewritten to compute call
1394 (btrace_fetch, btrace_clear): Updated.
1395 (btrace_insn_get, btrace_insn_number, btrace_insn_begin)
1396 (btrace_insn_end, btrace_insn_prev, btrace_insn_next)
1397 (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get)
1398 (btrace_call_number, btrace_call_begin, btrace_call_end)
1399 (btrace_call_prev, btrace_call_next, btrace_call_cmp)
1400 (btrace_find_function_by_number, btrace_set_insn_history)
1401 (btrace_set_call_history): New.
1402 * record-btrace.c (require_btrace): Use new btrace thread
1404 (record_btrace_info, btrace_insn_history)
1405 (record_btrace_insn_history, record_btrace_insn_history_range):
1406 Use new btrace thread info fields and new iterator.
1407 (btrace_func_history_src_line): Rename to ...
1408 (btrace_call_history_src_line): ...this. Use new btrace
1410 (btrace_func_history): Rename to ...
1411 (btrace_call_history): ...this. Use new btrace thread info
1412 fields and new iterator.
1413 (record_btrace_call_history, record_btrace_call_history_range):
1414 Use new btrace thread info fields and new iterator.
1416 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1418 * frame.h (frame_id_build_unavailable_stack_special): New.
1419 * frame.c (frame_id_build_unavailable_stack_special): New.
1421 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1423 * amd64-tdep.c (amd64_classify_insn_at, amd64_insn_is_call)
1424 (amd64_insn_is_ret, amd64_insn_is_jump, amd64_jmp_p): New.
1425 (amd64_init_abi): Add insn_is_call, insn_is_ret, and insn_is_jump
1427 * i386-tdep.c (i386_insn_is_call, i386_insn_is_ret)
1428 (i386_insn_is_jump, i386_jmp_p): New.
1429 (i386_gdbarch_init): Add insn_is_call, insn_is_ret, and
1430 insn_is_jump to gdbarch.
1431 * gdbarch.sh (insn_is_call, insn_is_ret, insn_is_jump): New.
1432 * gdbarch.h: Regenerated.
1433 * gdbarch.c: Regenerated.
1434 * arch-utils.h (default_insn_is_call, default_insn_is_ret)
1435 (default_insn_is_jump): New.
1436 * arch-utils.c (default_insn_is_call, default_insn_is_ret)
1437 (default_insn_is_jump): New.
1439 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1441 * common/btrace-common.h (btrace_read_type) <btrace_read_all>:
1443 (btrace_read_type) <BTRACE_READ_ALL>: ... this. Update users.
1444 (btrace_read_type) <btrace_read_new>: Change to ...
1445 (btrace_read_type) <BTRACE_READ_NEW>: ... this. Update users.
1447 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
1449 * common/linux-btrace.c (linux_read_btrace): Free trace from
1452 2014-01-15 Doug Evans <dje@google.com>
1454 * dwarf2read.c (open_and_init_dwp_file): Use pulongest to print
1457 2014-01-15 Tom Tromey <tromey@redhat.com>
1459 * dbxread.c (process_one_symbol): Use set_objfile_main_name.
1460 * dwarf2read.c (read_partial_die): Use set_objfile_main_name.
1461 * objfiles.c (get_objfile_bfd_data): Initialize language_of_main.
1462 (set_objfile_main_name): New function.
1463 * objfiles.h (struct objfile_per_bfd_storage) <name_of_main,
1464 language_of_main>: New fields.
1465 (set_objfile_main_name): Declare.
1466 * symtab.c (find_main_name): Loop over objfiles to find the main
1468 (set_main_name): Now static.
1469 (get_main_info): Add comment.
1470 * symtab.h (set_main_name): Don't declare.
1472 2014-01-15 Tom Tromey <tromey@redhat.com>
1474 * symtab.c (main_progspace_key): New global.
1475 (struct main_info): New.
1476 (name_of_main, language_of_main): Remove.
1477 (get_main_info, main_info_cleanup): New function.
1478 (set_main_name, main_name, main_language): Use get_main_info.
1479 (_initialize_symtab): Initialize main_progspace_key.
1481 2014-01-15 Tom Tromey <tromey@redhat.com>
1483 * dbxread.c (process_one_symbol): Update.
1484 * dwarf2read.c (read_partial_die): Update.
1485 * symfile.c (set_initial_language): Call main_language.
1486 * symtab.c (language_of_main): Now static.
1487 (set_main_name): Add 'lang' parameter.
1488 (find_main_name): Update.
1489 (main_language): New function.
1490 (symtab_observer_executable_changed): Update.
1491 * symtab.h (set_main_name): Update.
1492 (language_of_main): Remove.
1493 (main_language): Declare.
1495 2014-01-15 Tom Tromey <tromey@redhat.com>
1497 * symfile.c (init_entry_point_info): Use new "initialized" field.
1499 * objfiles.h (struct entry_point) <initialized>: New field.
1500 (struct objfile_per_bfd_storage) <ei>: New field, moved from...
1501 (struct objfile) <ei>: ...here. Remove.
1502 * objfiles.c (entry_point_address_query): Update.
1504 2014-01-15 Tom Tromey <tromey@redhat.com>
1506 * objfiles.c (entry_point_address_query): Relocate entry point
1508 (objfile_relocate1): Do not relocate entry point address.
1509 * objfiles.h (struct entry_info) <entry_point>: Update comment.
1510 <the_bfd_section_index>: New field.
1511 * symfile.c (init_entry_point_info): Find the entry point's
1514 2014-01-15 Tom Tromey <tromey@redhat.com>
1516 * solib-frv.c (enable_break): Use entry_point_address_query.
1518 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
1520 * NEWS: Add note on improved process record-replay on
1521 arm*-linux* targets.
1523 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
1525 * arm-tdep.c (enum arm_record_result): New enum.
1526 (arm_record_unsupported_insn): New function.
1527 (arm_record_coproc_data_proc): Removed.
1528 (thumb2_record_ld_st_multiple): New function.
1529 (thumb2_record_ld_st_dual_ex_tbb): New function.
1530 (thumb2_record_data_proc_sreg_mimm): New function.
1531 (thumb2_record_ps_dest_generic): New function.
1532 (thumb2_record_branch_misc_cntrl): New function.
1533 (thumb2_record_str_single_data): New function.
1534 (thumb2_record_ld_mem_hints): New function.
1535 (thumb2_record_ld_word): New function.
1536 (thumb2_record_lmul_lmla_div): New function.
1537 (thumb2_record_decode_insn_handler): New function.
1538 (decode_insn): Add thumb32 instruction handlers.
1540 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
1542 * arm-linux-tdep.c: Include "record-full.h" and "linux-record.h".
1543 (struct arm_linux_record_tdep): Declare.
1544 (arm_canonicalize_syscall): New function.
1545 (arm_all_but_pc_registers_record): New function.
1546 (arm_linux_syscall_record): New function.
1547 (arm_linux_init_abi): Add syscall recording constructs.
1548 * arm-tdep.c (thumb_record_ldm_stm_swi): Update thumb syscall
1549 decoding. (arm_record_coproc_data_proc): Update arm syscall
1551 * arm-tdep.h (struct gdbarch_tdep) <arm_swi_record>: Remove.
1552 <arm_syscall_record>: New field.
1553 * configure.tgt (arm*-*-linux*): Add linux-record.o to
1556 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
1558 * arm-tdep.c (thumb_record_misc): Update to use sp as base
1559 register for push instruction recording.
1561 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
1563 * arm-tdep.c (thumb_record_misc): Update to correct logical
1564 error while recording ldm, ldmia and pop instructions.
1566 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
1568 * arm-tdep.c (struct arm_mem_r) <addr>: Change type to uint32_t.
1570 2014-01-15 Pedro Alves <palves@redhat.com>
1572 * go32-nat.c (go32_open, go32_close, go32_attach, go32_detach)
1573 (go32_resume, go32_fetch_registers, store_register)
1574 (go32_store_registers, go32_prepare_to_store)
1575 (go32_xfer_memory, go32_files_info, go32_kill_inferior)
1576 (go32_create_inferior, go32_can_run, go32_terminal_init)
1577 (go32_terminal_inferior, go32_terminal_ours): Delete forward
1580 2014-01-15 Tom Tromey <tromey@redhat.com>
1582 * target.h (async_callback_ftype): New typedef.
1583 (struct target_ops) <to_async>: Use it.
1585 2014-01-15 Joel Brobecker <brobecker@adacore.com>
1587 * python/py-value.c (get_field_type): Remove unnecessary curly
1588 braces for single-statement if block.
1590 2014-01-15 Joel Brobecker <brobecker@adacore.com>
1592 * python/py-type.c (convert_field): Add missing empty line
1595 2014-01-14 Doug Evans <dje@google.com>
1597 * symfile.h (expand_symtabs_matching): Renamed from
1598 expand_partial_symbol_names. Update prototype.
1599 (map_symbol_filenames): Renamed from map_partial_symbol_filenames.
1600 * symfile.c (expand_symtabs_matching): Renamed from
1601 expand_partial_symbol_names. New args file_matcher, kind.
1602 Rename arg fun to symbol_matcher.
1603 (map_symbol_filenames): Renamed from map_partial_symbol_filenames.
1604 * ada-lang.c (ada_complete_symbol_matcher): Renamed from
1605 ada_expand_partial_symbol_name.
1606 (ada_make_symbol_completion_list): Update to call
1607 expand_symtabs_matching.
1608 (ada_add_global_exceptions): Call expand_symtabs_matching.
1609 * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_files): Update to
1610 call map_symbol_filenames.
1611 * symtab.c (sources_info): Update to call map_symbol_filenames.
1612 (search_symbols): Call expand_symtabs_matching.
1613 (symbol_completion_matcher): Renamed from expand_partial_symbol_name.
1614 (default_make_symbol_completion_list_break_on): Update to call
1615 expand_symtabs_matching.
1616 (make_source_files_completion_list): Update to call
1617 map_symbol_filenames.
1619 2014-01-14 Doug Evans <dje@google.com>
1621 * symfile.h (expand_symtabs_file_matcher_ftype): New typedef.
1622 (expand_symtabs_symbol_matcher_ftype): New typedef.
1623 (quick_symbol_functions.expand_symtabs_matching): Update to use.
1624 expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
1625 * symfile.c (expand_partial_symbol_names): Update to use
1626 expand_symtabs_symbol_matcher_ftype.
1627 * dwarf2read.c (dw2_expand_symtabs_matching): Update to use
1628 expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
1629 Arg name_matcher renamed to symbol_matcher.
1630 * psymtab.c (recursively_search_psymtabs): Update to use
1631 expand_symtabs_symbol_matcher_ftype. Arg name_matcher renamed to
1633 (expand_symtabs_matching_via_partial): Update to use
1634 expand_symtabs_file_matcher_ftype, expand_symtabs_symbol_matcher_ftype.
1635 Arg name_matcher renamed to symbol_matcher.
1637 2014-01-14 Doug Evans <dje@google.com>
1639 * psymtab.c (expand_partial_symbol_names): Delete, moved to symfile.c.
1640 (map_partial_symbol_filenames): Ditto.
1641 * psymtab.h (expand_partial_symbol_names): Delete, moved to symfile.h.
1642 (map_partial_symbol_filenames): Ditto.
1643 * symfile.c (expand_partial_symbol_names): Moved here from psymtab.c.
1644 (map_partial_symbol_filenames): Ditto.
1645 * symfile.h (expand_partial_symbol_names): Moved here from psymtab.h.
1646 (map_partial_symbol_filenames): Ditto.
1647 * symtab.c: Delete #include "psymtab.h".
1649 2014-01-14 Pedro Alves <palves@redhat.com>
1650 Tom Tromey <tromey@redhat.com>
1652 * infrun.c (use_displaced_stepping): Use find_record_target
1653 instead of RECORD_IS_USED.
1654 (adjust_pc_after_break): Use record_full_is_used instead of
1656 * record-btrace.c (record_btrace_open): Call record_preopen
1657 instead of checking RECORD_IS_USED.
1658 * record-full.c (record_full_shortname)
1659 (record_full_core_shortname): New globals.
1660 (record_full_is_used): New function.
1661 (find_full_open): Call record_preopen instead of checking
1663 (init_record_full_ops): Set the target's shortname to
1664 record_full_shortname.
1665 (init_record_full_core_ops): Set the target's shortname to
1666 record_full_core_shortname.
1667 * record-full.h (record_full_is_used): Declare.
1668 * record.c (find_record_target): Make extern.
1669 (record_preopen): New function.
1670 * record.h (RECORD_IS_USED): Delete macro.
1671 (find_record_target, record_preopen): Declare functions.
1673 2014-01-14 Yao Qi <yao@codesourcery.com>
1675 * gdbarch.sh (core_xfer_shared_libraries): Change its argument
1676 'len''s type to ULONGEST.
1677 (core_xfer_shared_libraries_aix): Likewise.
1678 * gdbarch.c, gdbarch.h: Regenerated.
1679 * i386-cygwin-tdep.c (windows_core_xfer_shared_libraries):
1680 Change type of 'len' to ULONGEST.
1681 * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise.
1682 (rs6000_aix_core_xfer_shared_libraries_aix): Likewise.
1684 2014-01-14 Yao Qi <yao@codesourcery.com>
1686 * common/linux-osdata.c (linux_xfer_osdata_processes): Change
1687 type of 'len' to ULONGEST.
1688 (linux_xfer_osdata_processgroups): Likewise.
1689 (linux_xfer_osdata_threads): Likewise.
1690 (linux_xfer_osdata_fds): Likewise.
1691 (linux_xfer_osdata_isockets): Likewise.
1692 (linux_xfer_osdata_shm): Likewise.
1693 (linux_xfer_osdata_sem): Likewise.
1694 (linux_xfer_osdata_msg): Likewise.
1695 (linux_common_xfer_osdata): Likewise.
1696 (struct osdata_type) <getter>: Likewise.
1697 * common/linux-osdata.h (linux_common_xfer_osdata): Update
1700 2014-01-14 Yao Qi <yao@codesourcery.com>
1702 * target.h (target_xfer_partial_ftype): Update.
1703 (struct target_ops) <to_xfer_partial>: Change 'len' type to
1705 * aix-thread.c (aix_thread_xfer_partial): Change type of
1706 argument 'len' to ULONGEST.
1707 * auxv.c (procfs_xfer_auxv): Likewise.
1708 (ld_so_xfer_auxv): Likewise.
1709 (memory_xfer_auxv): Likewise.
1710 * bfd-target.c (target_bfd_xfer_partial): Likewise.
1711 * bsd-kvm.c (bsd_kvm_xfer_partial): Likewise.
1712 * bsd-uthread.c (bsd_uthread_xfer_partial): Likewise.
1713 * corelow.c (core_xfer_partial): Likewise.
1714 * ctf.c (ctf_xfer_partial): Likewise.
1715 * darwin-nat.c (darwin_read_write_inferior): Likewise. Use
1717 (darwin_read_dyld_info): Likewise.
1718 (darwin_xfer_partial): Likewise.
1719 * exec.c (section_table_xfer_memory_partial): Likewise.
1720 (exec_xfer_partial): Likewise.
1721 * exec.h (section_table_xfer_memory_partial): Update
1723 * gnu-nat.c (gnu_xfer_memory): Likewise. Call pulongest
1724 instead of plongest.
1725 (gnu_xfer_partial): Likewise.
1726 * ia64-hpux-nat.c (ia64_hpux_xfer_memory): Likewise.
1727 (ia64_hpux_xfer_solib_got): Likewise.
1728 (ia64_hpux_xfer_partial): Likewise.
1729 * ia64-linux-nat.c (ia64_linux_xfer_partial):
1730 * inf-ptrace.c (inf_ptrace_xfer_partial):
1731 * inf-ttrace.c (inf_ttrace_xfer_partial):
1732 * linux-nat.c (linux_xfer_siginfo): Likewise.
1733 (linux_nat_xfer_partial): Likewise.
1734 (spu_enumerate_spu_ids, linux_proc_xfer_spu): Likewise.
1735 (linux_nat_xfer_osdata, linux_xfer_partial): Likewise.
1736 * monitor.c (monitor_xfer_memory): Likewise.
1737 (monitor_xfer_partial): Likewise.
1738 * procfs.c (procfs_xfer_partial): Likewise.
1739 * record-full.c (record_full_xfer_partial): Likewise.
1740 (record_full_core_xfer_partial): Likewise.
1741 * remote-sim.c (gdbsim_xfer_memory): Likewise. Call pulongest
1742 instead of plongest.
1743 (gdbsim_xfer_partial): Likewise.
1744 * remote.c (remote_xfer_partial): Likewise.
1745 * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise.
1746 * rs6000-aix-tdep.h (rs6000_aix_ld_info_to_xml): Update
1748 * rs6000-nat.c (rs6000_xfer_partial): Likewise.
1749 (rs6000_xfer_shared_libraries): Likewise.
1750 * sol-thread.c (sol_thread_xfer_partial): Likewise.
1751 * sparc-nat.c (sparc_xfer_wcookie): Likewise.
1752 (sparc_xfer_partial): Likewise.
1753 * spu-linux-nat.c (spu_proc_xfer_spu): Likewise.
1754 (spu_xfer_partial): Likewise.
1755 * spu-multiarch.c (spu_xfer_partial): Likewise.
1756 * target.c (target_read_live_memory): Likewise.
1757 (memory_xfer_live_readonly_partial): Likewise.
1758 (memory_xfer_partial, memory_xfer_partial_1): Likewise.
1759 (target_xfer_partial, default_xfer_partial): Likewise.
1760 (current_xfer_partial): Likewise.
1761 * tracepoint.c (tfile_xfer_partial): Likewise.
1762 * windows-nat.c (windows_xfer_memory): Likewise. Call
1763 pulongest instead of plongest.
1764 (windows_xfer_partial): Likewise.
1765 (windows_xfer_shared_libraries): Likewise.
1767 2014-01-14 Yao Qi <yao@codesourcery.com>
1769 * rs6000-nat.c (rs6000_xfer_shared_libraries): Use
1770 target_xfer_partial_ftype.
1772 2014-01-13 Siva Chandra Reddy <sivachandra@google.com>
1776 * valops.c (value_struct_elt_bitpos): New function
1777 * py-type.c (convert_field): Set 'name' attribute of a gdb.Field
1778 object to 'None' if the field name is an empty string ("").
1779 * python/py-value.c (valpy_getitem): Use 'bitpos' and 'type'
1780 attribute to look for a field when 'name' is 'None'.
1781 (get_field_type): New function
1783 2014-01-13 Doug Evans <dje@google.com>
1786 * dwarf2read.c (dwarf2_get_dwz_file): Call gdb_bfd_record_inclusion.
1787 (try_open_dwop_file): Ditto.
1788 * gdb_bfd.c: #include "vec.h".
1789 (bfdp): New typedef.
1790 (struct gdb_bfd_data): New member included_bfds.
1791 (gdb_bfd_unref): Unref all included bfds.
1792 (gdb_bfd_record_inclusion): New function.
1793 * gdb_bfd.h (gdb_bfd_record_inclusion): Declare.
1795 2014-01-13 Tom Tromey <tromey@redhat.com>
1797 * gdbcore.h (deprecated_core_resize_section_table): Remove.
1799 2014-01-13 Tom Tromey <tromey@redhat.com>
1801 * defs.h (use_windows): Remove.
1802 * gdb.c (main): Update.
1803 * main.c (captured_main, gdb_main): Update.
1804 * main.h (struct captured_main_args) <use_windows>: Remove.
1805 * top.c (use_windows): Remove.
1807 2014-01-13 Tom Tromey <tromey@redhat.com>
1809 * defs.h (deprecated_flush_hook): Remove.
1811 2014-01-13 Jan Kratochvil <jan.kratochvil@redhat.com>
1814 * linux-thread-db.c (try_thread_db_load): Add parameter
1815 check_auto_load_safe. Move here the file_is_auto_load_safe call.
1816 (try_thread_db_load_from_pdir_1): Move it there from here.
1817 (try_thread_db_load_from_sdir): Update caller.
1818 (try_thread_db_load_from_dir): Move it there from here.
1820 2014-01-13 Patrick Palka <patrick@parcs.ath.cx>
1822 * regformats/regdat.sh: Always rewrite the register file.
1824 2014-01-13 Pedro Alves <palves@redhat.com>
1826 * Makefile.in (CHECK_HEADERS): New variable.
1827 (check-headers:): New rule.
1829 2014-01-13 Tom Tromey <tromey@redhat.com>
1831 * cli/cli-setshow.c (do_set_command): Update.
1832 * defs.h (deprecated_set_hook): Remove.
1833 * top.c (deprecated_set_hook): Remove.
1835 2014-01-13 Pedro Alves <palves@redhat.com>
1837 * tracepoint.c (tfile_fetch_registers): Don't infer the PC from
1838 the tracepoint if the PC is a pseudo-register.
1840 2014-01-13 Tom Tromey <tromey@redhat.com>
1842 * defs.h (XCALLOC): Remove.
1843 * bcache.c (bcache_xmalloc): Use XCNEW, not XCALLOC.
1844 (print_bcache_statistics): Use XCNEWVEC, not XCALLOC.
1845 * dwarf2loc.c (allocate_piece_closure): Likewise.
1846 * elfread.c (elf_symfile_segments): Likewise.
1847 (elf_symfile_segments): Likewise.
1848 * gdbtypes.c (copy_type_recursive): Likewise.
1849 * i386-tdep.c (i386_gdbarch_init): Use XCNEW, not XCALLOC.
1850 * jit.c (jit_frame_sniffer): Use XCNEWVEC, not XCALLOC.
1851 * minsyms.c (prim_record_minimal_symbol_full): Use XCNEW, not
1853 * mt-tdep.c (mt_gdbarch_init): Likewise.
1854 * opencl-lang.c (allocate_lval_closure): Use XCNEWVEC, not
1856 * psymtab.c (psymbol_compare): Use XCNEW, not XCALLOC.
1857 * regcache.c (regcache_xmalloc_1): Use XCNEWVEC, not XCALLOC.
1858 * registry.c (registry_alloc_data): Likewise.
1859 * rs6000-tdep.c (rs6000_gdbarch_init): Use XCNEW, not XCALLOC.
1860 * s390-linux-tdep.c (s390_gdbarch_init): Likewise.
1861 * serial.c (serial_fdopen_ops): Likewise.
1862 * solib-aix.c (solib_aix_get_section_offsets): Use XCNEWVEC, not
1864 * spu-tdep.c (spu_gdbarch_init): Use XCNEW, not XCALLOC.
1865 * symfile.c (default_symfile_segments): Use XCNEW and XCNEWVEC,
1868 2014-01-13 Tom Tromey <tromey@redhat.com>
1870 * defs.h (XMALLOC): Remove.
1871 * avr-tdep.c (avr_gdbarch_init): Use XNEW, not XMALLOC.
1872 * bfin-tdep.c (bfin_gdbarch_init): Likewise.
1873 * cli-out.c (struct ui_out *): Likewise.
1874 * cli/cli-dump.c (add_dump_command): Likewise.
1875 (add_dump_command): Likewise.
1876 * complaints.c (get_complaints): Likewise.
1877 (find_complaint): Likewise.
1878 * dwarf2-frame.c (execute_cfa_program): Likewise.
1879 * dwarf2read.c (abbrev_table_read_table): Likewise.
1880 * gdbarch.sh: Likewise.
1881 * gdbarch.c: Rebuild.
1882 * inf-ttrace.c (inf_ttrace_add_page): Likewise.
1883 * interps.c (interp_new): Likewise.
1884 * lm32-tdep.c (lm32_gdbarch_init): Likewise.
1885 * m32r-tdep.c (m32r_gdbarch_init): Likewise.
1886 * mi/mi-console.c (mi_console_file_new): Likewise.
1887 * mi/mi-interp.c (mi_interpreter_init): Likewise.
1888 * mi/mi-out.c (mi_out_new): Likewise.
1889 * mi/mi-parse.c (mi_parse): Likewise.
1890 * microblaze-tdep.c (microblaze_gdbarch_init): Likewise.
1891 * moxie-tdep.c (moxie_gdbarch_init): Likewise.
1892 * observer.c (xalloc_observer_list_node): Likewise.
1893 * regcache.c (regcache_xmalloc_1): Likewise.
1894 * reggroups.c (reggroup_new): Likewise.
1895 (_initialize_reggroup): Likewise.
1896 * registry.c (register_data_with_cleanup): Likewise.
1897 * remote.c (remote_notif_stop_alloc_reply): Likewise.
1898 * ser-base.c (serial_ttystate): Likewise.
1899 * ser-mingw.c (make_pipe_state): Likewise.
1900 * ser-pipe.c (pipe_open): Likewise.
1901 * serial.c (serial_open): Likewise.
1902 * sh64-tdep.c (sh64_gdbarch_init): Likewise.
1903 * tui/tui-data.c (tui_alloc_generic_win_info): Likewise.
1904 (tui_alloc_win_info): Likewise.
1905 (tui_add_content_elements): Likewise.
1906 * tui/tui-file.c (tui_file_new): Likewise.
1907 * tui/tui-out.c (tui_out_new): Likewise.
1908 * ui-file.c (mem_file_new): Likewise.
1909 * ui-out.c (push_level): Likewise.
1910 (make_cleanup_ui_out_end): Likewise.
1911 (append_header_to_list): Likewise.
1912 (ui_out_new): Likewise.
1913 * user-regs.c (user_reg_add_builtin): Likewise.
1915 2014-01-13 Tom Tromey <tromey@redhat.com>
1917 * defs.h (XZALLOC): Remove.
1918 * ada-lang.c (get_ada_inferior_data): Use XCNEW, not XZALLOC.
1919 * ada-tasks.c (get_ada_tasks_pspace_data): Likewise.
1920 (get_ada_tasks_inferior_data): Likewise.
1921 * auto-load.c (get_auto_load_pspace_data): Likewise.
1922 * auxv.c (get_auxv_inferior_data): Likewise.
1923 * bfd-target.c (target_bfd_reopen): Likewise.
1924 * breakpoint.c (get_catch_syscall_inferior_data): Likewise.
1925 (deprecated_insert_raw_breakpoint): Likewise.
1926 * bsd-uthread.c (bsd_uthread_pid_to_str): Likewise.
1927 * corelow.c (core_open): Likewise.
1928 * darwin-nat.c (darwin_check_new_threads): Likewise.
1929 (darwin_attach_pid): Likewise.
1930 * dummy-frame.c (dummy_frame_push): Likewise.
1931 * dwarf2-frame.c (dwarf2_frame_cache): Likewise.
1932 * dwarf2loc.c (allocate_piece_closure): Likewise.
1933 * elfread.c (elf_symfile_segments): Likewise.
1934 * eval.c (ptrmath_type_p): Likewise.
1935 * exceptions.c (EXCEPTIONS_SIGJMP_BUF): Likewise.
1936 * gdbtypes.c (alloc_type_arch): Likewise.
1937 (alloc_type_instance): Likewise.
1938 * hppa-tdep.c (hppa_gdbarch_init): Likewise.
1939 * inf-child.c (inf_child_can_use_agent): Likewise.
1940 * inflow.c (get_inflow_inferior_data): Likewise.
1941 * infrun.c (save_infcall_suspend_state): Likewise.
1942 * jit.c (jit_reader_load): Likewise.
1943 (get_jit_objfile_data): Likewise.
1944 (get_jit_program_space_data): Likewise.
1945 (jit_object_open_impl): Likewise.
1946 (jit_symtab_open_impl): Likewise.
1947 (jit_block_open_impl): Likewise.
1948 (jit_frame_sniffer): Likewise.
1949 * linux-fork.c (add_fork): Likewise.
1950 * maint.c (make_command_stats_cleanup): Likewise.
1951 * objfiles.c (get_objfile_pspace_data): Likewise.
1952 * opencl-lang.c (struct lval_closure): Likewise.
1953 * osdata.c (osdata_start_osdata): Likewise.
1954 * progspace.c (new_address_space): Likewise.
1955 (add_program_space): Likewise.
1956 * remote-sim.c (get_sim_inferior_data): Likewise.
1957 * sh-tdep.c (sh_gdbarch_init): Likewise.
1958 * skip.c (Ignore): Likewise.
1959 (skip_delete_command): Likewise.
1960 * solib-aix.c (get_solib_aix_inferior_data): Likewise.
1961 (library_list_start_library): Likewise.
1962 (solib_aix_current_sos): Likewise.
1963 * solib-darwin.c (get_darwin_info): Likewise.
1964 (darwin_current_sos): Likewise.
1965 * solib-dsbt.c (get_dsbt_info): Likewise.
1966 * solib-ia64-hpux.c (new_so_list): Likewise.
1967 (ia64_hpux_get_solib_linkage_addr): Likewise.
1968 * solib-spu.c (append_ocl_sos): Likewise.
1969 (spu_current_sos): Likewise.
1970 * solib-svr4.c (get_svr4_info): Likewise.
1971 (svr4_keep_data_in_core): Likewise.
1972 (library_list_start_library): Likewise.
1973 (svr4_default_sos): Likewise.
1974 (svr4_read_so_list): Likewise.
1975 * solib-target.c (library_list_start_library): Likewise.
1976 (solib_target_current_sos): Likewise.
1977 * sparc-tdep.c (sparc32_gdbarch_init): Likewise.
1978 * symfile-debug.c (install_symfile_debug_logging): Likewise.
1979 * symfile.c (default_symfile_segments): Likewise.
1980 * target-descriptions.c (tdesc_data_init): Likewise.
1981 (tdesc_create_reg): Likewise.
1982 (struct tdesc_type *): Likewise.
1983 (tdesc_create_vector): Likewise.
1984 (tdesc_set_struct_size): Likewise.
1985 (struct tdesc_type *): Likewise.
1986 (tdesc_free_feature): Likewise.
1987 (tdesc_create_feature): Likewise.
1988 * windows-nat.c (windows_add_thread): Likewise.
1989 (windows_make_so): Likewise.
1990 * xml-support.c (gdb_xml_body_text): Likewise.
1991 (gdb_xml_create_parser_and_cleanup): Likewise.
1992 (xml_process_xincludes): Likewise.
1993 * xml-syscall.c (allocate_syscalls_info): Likewise.
1994 (syscall_create_syscall_desc): Likewise.
1996 2014-01-12 Sergio Durigan Junior <sergiodj@redhat.com>
1998 * i386-tdep.c (i386_stap_parse_special_token_triplet): New
1999 function, with code from i386_stap_parse_special_token.
2000 (i386_stap_parse_special_token_three_arg_disp): Likewise.
2001 (i386_stap_parse_special_token): Move code to the two functions
2004 2014-01-09 Pedro Alves <palves@redhat.com>
2005 Hui Zhu <hui@codesourcery.com>
2008 * breakpoint.c (insert_bp_location): Rename hw_bp_err_string to
2009 bp_err_string. Don't mark the location shlib_disabled if the
2010 error thrown wasn't a generic or memory error. Catch errors
2011 thrown while inserting breakpoints in overlayed code. Output
2012 error message of software breakpoints.
2013 * remote.c (remote_insert_breakpoint): If this breakpoint has
2014 target-side commands but this stub doesn't support Z0 packets,
2015 throw NOT_SUPPORTED_ERROR error.
2016 * exceptions.h (enum errors) <NOT_SUPPORTED_ERROR>: New error.
2017 * target.h (target_insert_breakpoint): Extend comment.
2018 (target_insert_hw_breakpoint): Add comment.
2020 2014-01-08 Pedro Alves <palves@redhat.com>
2022 * remote.c (remote_add_thread): Add threads silently if starting
2024 (remote_notice_new_inferior): If in all-stop, and starting up,
2025 don't call notice_new_inferior.
2026 (get_current_thread): New function, factored out from ...
2027 (add_current_inferior_and_thread): ... this. Adjust.
2028 (remote_start_remote) <all-stop>: Fetch the thread list. If we
2029 found any thread, then select the remote's current thread as GDB's
2032 2014-01-08 Joel Brobecker <brobecker@adacore.com>
2034 * NEWS: Create a new section for the next release branch.
2035 Rename the section of the current branch, now that it has
2038 2014-01-08 Joel Brobecker <brobecker@adacore.com>
2040 GDB 7.7 branch created (79301218fa0f074c5656db0ec8972a5ddcf91fb5):
2041 * version.in: Bump version to 7.7.50.DATE-cvs.
2043 2014-01-08 Yao Qi <yao@codesourcery.com>
2045 * spu-linux-nat.c (spu_symbol_file_add_from_memory): Change
2046 type of 'id' to gdb_byte. Cast 'id' to 'const char *'.
2047 (spu_xfer_partial): Cast 'buf' to 'const char *'.
2049 2014-01-08 Yao Qi <yao@codesourcery.com>
2051 * spu-linux-nat.c (spu_symbol_file_add_from_memory): Pass
2052 return value of bfd_get_filename to symbol_file_add_from_bfd.
2054 2014-01-08 Pierre Muller <muller@sourceware.org>
2057 * coff-pe-read.c (struct read_pe_section_data): Add index field.
2058 (add_pe_exported_sym): Use SECTION_DATA->INDEX for call
2059 to prim_record_mininal_symbol_and_info.
2060 (add_pe_forwarded_sym): Use known section number of forwarded symbol
2061 in call to prim_record_minimal_symbol_and_info.
2062 (read_pe_exported_syms): Set index field of section_data.
2064 2014-01-07 Andrew Pinski <apinski@cavium.com>
2066 * features/aarch64-core.xml (cpsr): Change to be 64bit.
2067 * features/aarch64.c: Regenerate.
2069 2014-01-07 Andreas Schwab <schwab@linux-m68k.org>
2071 * target.c (return_null): Define.
2072 (update_current_target): Use it instead of return_zero for
2073 functions that return a pointer.
2075 2014-01-07 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
2077 * source.c (add_path): Fix check for duplicated paths in the previously
2080 2014-01-07 Honggyu Kim <hong.gyu.kim@lge.com>
2082 * ada-lang.c: Remove duplicated include statements.
2083 * alphabsd-nat.c: Ditto.
2084 * amd64-darwin-tdep.c: Ditto.
2085 * amd64fbsd-nat.c: Ditto.
2086 * auto-load.c: Ditto.
2088 * breakpoint.c: Ditto.
2090 * fork-child.c: Ditto.
2091 * gdb_usleep.c: Ditto.
2092 * i386-darwin-tdep.c: Ditto.
2093 * i386fbsd-nat.c: Ditto.
2095 * inferior.c: Ditto.
2097 * linux-nat.c: Ditto.
2098 * linux-tdep.c: Ditto.
2099 * m68kbsd-nat.c: Ditto.
2100 * m68klinux-nat.c: Ditto.
2101 * microblaze-tdep.c: Ditto.
2102 * mips-linux-tdep.c: Ditto.
2103 * mn10300-tdep.c: Ditto.
2104 * nto-tdep.c: Ditto.
2105 * opencl-lang.c: Ditto.
2107 * printcmd.c: Ditto.
2108 * regcache.c: Ditto.
2109 * remote-m32r-sdi.c: Ditto.
2113 * tilegx-linux-nat.c: Ditto.
2114 * tilegx-tdep.c: Ditto.
2115 * tracepoint.c: Ditto.
2117 * vaxbsd-nat.c: Ditto.
2118 * windows-nat.c: Ditto.
2119 * xtensa-tdep.c: Ditto.
2121 2014-01-07 Yao Qi <yao@codesourcery.com>
2123 * spu-linux-nat.c (_initialize_spu_nat): Declare.
2125 2014-01-07 Yao Qi <yao@codesourcery.com>
2126 Joel Brobecker <brobecker@adacore.com>
2128 * aix-thread.c (pdc_read_regs): Cast parameter to uintptr_t.
2129 (pdc_write_regs): Likewise.
2130 (fetch_regs_kernel_thread): Likewise.
2131 (store_regs_kernel_thread): Likewise.
2133 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2135 * ada-varobj.c (ada_varobj_adjust_for_child_access): Convert
2136 tagged type objects to their actual type.
2138 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2140 * ada-valprint.c (print_field_values): Add "language" parameter.
2141 Update calls to print_field_values and print_variant_part.
2142 Pass new parameter "language" in call to val_print instead
2143 of "current_language". Replace call to ada_val_print by call
2145 (print_variant_part): Add "language" parameter.
2146 (ada_val_print_struct_union): Update call to print_field_values.
2148 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2150 * ada-valprint.c (ui_memcpy): Delete.
2151 (ada_print_floating): Update documentation. Add empty line
2152 between between function documentation and implementation.
2153 Delete variable "buffer". Use ui_file_xstrdup in place of
2154 ui_file_put. Minor adjustments following this change.
2156 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2158 * ada-valprint.c (ada_val_print_string): New function,
2159 extracted from ada_val_print_array.
2160 (ada_val_print_array): Replace extracted code by call
2161 to ada_val_print_string followed by a return. Move
2162 "else" branch to the function's top block.
2164 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2166 * ada-valprint.c (ada_val_print_array): Move implementation
2167 down. Rename parameter "offset" and "val" into "offset_aligned"
2168 and "original_value" respectively. Add parameter "offset".
2170 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2172 * ada-valprint.c (ada_val_print_ref): Rewrite by mostly
2173 re-organizing the code. Change the "???" message printed
2174 when target type is a TYPE_CODE_UNDEF into
2175 "<ref to undefined type>".
2177 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2179 * ada-valprint.c (print_record): Delete, implementation inlined...
2180 (ada_val_print_struct_union): ... here. Remove call to
2181 ada_check_typedef in inlined implementation.
2183 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2185 * ada-valprint.c (ada_val_print_gnat_array): New function,
2186 extracted from ada_val_print_1;
2187 (ada_val_print_ptr, ada_val_print_num, ada_val_print_enum)
2188 (ada_val_print_flt, ada_val_print_struct_union)
2189 (ada_val_print_ref): Likewise.
2190 (ada_val_print_1): Delete variables i and elttype.
2191 Replace extracted-out code by call to corresponding
2194 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2196 * ada-valprint.c (ada_val_print_1): Remove call to gdb_flush.
2198 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2200 * ada-valprint.c (ada_val_print_1): Replace calls to
2201 ada_val_print_1 by calls to val_print.
2203 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2205 * ada-valprint.c (ada_val_print_1): Add parameter "language".
2206 Update calls to self accordingly. Replace calls to c_val_print
2207 by calls to val_print.
2209 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2211 * ada-valprint.c (print_record): Delete declaration.
2212 (adjust_type_signedness, ada_val_print_1): Likewise.
2213 (ada_val_print): Move function implementation down.
2214 (print_variant_part, print_field_values, print_record):
2215 Move function implementation up.
2217 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2219 * python/py-type.c (typy_get_name): New function.
2220 (type_object_getset): Add entry for attribute "name".
2221 * NEWS: Add entry mentioning this new attribute.
2223 2014-01-07 Yao Qi <yao@codesourcery.com>
2225 * gnu-nat.c (set_exceptions_cmd): Remove an empty body 'if'
2228 2014-01-07 Yao Qi <yao@codesourcery.com>
2230 * gnu-nat.c (info_port_rights): Add qualifier const to
2233 2014-01-07 Yao Qi <yao@codesourcery.com>
2235 * gnu-nat.c (trace_me): Use 'void' for empty argument list.
2237 2014-01-07 Yao Qi <yao@codesourcery.com>
2239 * gnu-nat.c (make_inf) Update declaration.
2240 (make_inf): Make it static.
2241 (inf_set_traced): Likewise.
2242 (inf_port_to_thread, inf_task_died_status): Likewise.
2244 2014-01-07 Yao Qi <yao@codesourcery.com>
2246 * gnu-nat.c (inf_tid_to_proc): Remove declaration.
2248 2014-01-07 Yao Qi <yao@codesourcery.com>
2250 * gnu-nat.c (_initialize_gnu_nat): Declare.
2252 2014-01-07 Yao Qi <yao@codesourcery.com>
2254 * gdbarch.sh (byte_order, byte_order_for_code): Change type to
2256 (struct gdbarch_info) <byte_order>: Change type to
2258 <byte_order_for_code>: Likewise.
2259 * gdbarch.c, gdbarch.h: Regenerated.
2261 2014-01-06 Sasha Smundak <asmundak@google.com>
2263 * jit.c: (jit_reader_load_command): Fix JIT reader path creation.
2265 2014-01-06 Tom Tromey <tromey@redhat.com>
2267 * doublest.c (convert_doublest_to_floatformat): Use const, not
2269 * somread.c (som_symtab_read): Likewise.
2271 2014-01-07 Hui Zhu <hui@codesourcery.com>
2273 * gdb_bfd.c (gdb_bfd_stash_filename): Removed.
2274 (gdb_bfd_open): Removed gdb_bfd_stash_filename.
2275 (gdb_bfd_fopen): Ditto.
2276 (gdb_bfd_openr): Ditto.
2277 (gdb_bfd_openw): Ditto.
2278 (gdb_bfd_openr_iovec): Ditto.
2279 (gdb_bfd_fdopenr): Ditto.
2280 * gdb_bfd.h (gdb_bfd_stash_filename): Removed.
2281 * solib-aix.c (solib_aix_bfd_open): Alloc object_bfd->filename
2283 * solib-darwin.c (darwin_bfd_open): Alloc res->filename
2285 * symfile-mem.c (symbol_file_add_from_memory): Removed
2286 gdb_bfd_stash_filename.
2288 2014-01-03 Doug Evans <dje@google.com>
2290 * nat/linux-waitpid.c (linux_debug): Remove extraneous \n from
2293 2014-01-01 Joel Brobecker <brobecker@adacore.com>
2295 Update year range in copyright notice of all files.
2297 2014-01-01 Joel Brobecker <brobecker@adacore.com>
2299 * top.c (print_gdb_version): Set copyright year to 2014.
2301 2014-01-01 Joel Brobecker <brobecker@adacore.com>
2303 * config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2013.
2305 For older changes see ChangeLog-2013.
2311 version-control: never