1 2011-03-15 Ulrich Weigand <uweigand@de.ibm.com>
3 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): Add support
4 for the "generic" vector ABI used with GCC 4.3 and later.
5 (ppc64_sysv_abi_return_value): Likewise.
7 2011-03-15 Ulrich Weigand <uweigand@de.ibm.com>
9 * infcall.c (call_function_by_hand): Function return value is
10 always a non_lval, even when using struct_return.
12 2011-03-15 Pedro Alves <pedro@codesourcery.com>
14 * printcmd.c (ALL_DISPLAYS_SAFE): New.
15 (map_display_numbers): New.
16 (do_delete_display): New.
17 (undisplay_command): Use map_display_numbers.
18 (do_enable_disable_display): New.
19 (enable_disable_display_command): New function.
20 (enable_display): Delete.
21 (enable_display_command): New.
22 (disable_display_command): Reimplement.
23 (_initialize_printcmd): Adjust "enable display" command to use
24 `enable_display_command' as callback.
26 2011-03-14 Phil Muldoon <pmuldoon@redhat.com>
28 * NEWS: Add Python breakpoint 'stop' operation.
30 2011-03-14 Phil Muldoon <pmuldoon@redhat.com>
32 * NEWS: Delete duplicate entry. Fix typo.
34 2011-03-14 Pierre Muller <muller@ics.u-strasbg.fr>
36 Fix ARI warning about function names in first column.
37 Put prototype declaration on same line as return type.
40 * python/py-stopevent.h: Ditto.
41 For long function names, split parameters to
42 allow function name on same line as return type.
43 * solib-pa64.c: Ditto.
46 For long function declaration, use single line.
50 2011-03-14 Phil Muldoon <pmuldoon@redhat.com>
52 * python/python.h: Declare gdbpy_should_stop and
53 gdbpy_breakpoint_has_py_cond.
54 * python/python.c: Add python.h to includes. Remove python.h from
55 HAVE_PYTHON definition
56 (gdbpy_should_stop): New dummy function.
57 (gdbpy_breakpoint_has_py_cond): New dummy function.
58 * python/py-breakpoint.c (bppy_init): Rewrite to allow
59 sub-classing capabilities.
60 (gdbpy_should_stop): New function.
61 (gdbpy_breakpoint_has_py_cond): New function.
62 (local_setattro): New function.
63 * breakpoint.c (condition_command): Add check for Python 'stop'
65 (bpstat_check_breakpoint_conditions): Execute Python 'stop'
66 operation function as part of stop/continue tests.
68 2011-03-14 Tom Tromey <tromey@redhat.com>
71 * dwarf2loc.c (dwarf_expr_dwarf_call): Remove 'return'.
72 (needs_frame_dwarf_call): Likewise.
74 2011-03-14 Pierre Muller <muller@ics.u-strasbg.fr>
76 Fix ARI warning about functions without parameters that do not
78 * breakpoint.c (all_tracepoints): Replace () by (void).
79 * f-exp.y (match_string_literal): Ditto.
81 * m2-exp.y (yylex): Ditto.
82 * mep-tdep.c (current_me_module): Ditto.
83 (current_options): Ditto.
84 (current_cop_data_bus_width): Ditto.
85 (current_cr_names): Ditto.
86 (current_cr_is_float): Ditto.
87 (current_ccr_names): Ditto.
88 * objc-exp.y (yylex): Ditto.
89 * p-exp.y (yylex): Ditto.
90 * remote.c (send_interrupt_sequence): Ditto.
91 * tracepoint.c (current_trace_status): Ditto.
92 * python/py-evts.c (gdbpy_initialize_py_events): Ditto.
93 * python/py-prettyprint.c (push_dummy_python_frame): Ditto.
95 2011-03-11 Michael Snyder <msnyder@vmware.com>
97 * cli/cli-decode.h (CMD_LIST_AMBIGUOUS): Define.
98 * cli/cli-decode.c (lookup_cmd_1): Use CMD_LIST_AMBIGUOUS.
99 (lookup_cmd): Test for CMD_LIST_AMBIGUOUS.
100 * completer.c (complete_line_internal): Use CMD_LIST_AMBIGUOUS.
101 * top.c (set_verbose): Use CMD_LIST_AMBIGUOUS.
103 * event-loop-c (delete_async_signal_handler): Assert prev_ptr.
104 (delete_async_event_handler): Ditto.
106 * python/py-breakpoint.c (bppy_set_condition): Stop memory leak.
108 * python/py-breakpoint.c (bppy_get_commands): Fix memory leak.
110 * top.c (set_verbose): Assert showcmd was found.
112 2011-03-11 Maxim Grigoriev <maxim2405@gmail.com>
114 * xtensa-tdep.c (warning_once): Correct style issues.
116 2011-03-11 Yao Qi <yao@codesourcery.com>
118 * arm-tdep.c (copy_ldr_str_ldrb_strb): Remove redundant statements.
120 2011-03-11 Andreas Schwab <schwab@redhat.com>
122 * common/aclocal.m4: Remove.
124 2011-03-10 Maxim Grigoriev <maxim2405@gmail.com>
126 * xtensa-tdep.c (windowing_enabled): Remove inline attribute.
127 (xtensa_write_register, xtensa_read_register): Likewise.
128 (xtensa_hextochar): Removed.
129 (xtensa_init_reggroups): Replace xtensa_hextochar () by explicit code.
131 2011-03-10 Maxim Grigoriev <maxim2405@gmail.com>
133 * xtensa-tdep.c (xtensa_c0reg_t): Update comments.
134 (xtensa_call0_frame_cache_t): Update comments. New fields added.
135 (xtensa_alloc_frame_cache): Add initialization for new fields.
136 (xtensa_frame_cache): Change the way how call0_frame_cache () is called.
137 (warning_once): New function.
138 (xtensa_insn_kind): New item c0opc_and.
139 (call0_classify_opcode): Add the case for AND instruction.
140 (call0_track_op): Change arguments. New local variable litbase.
141 Add the case to handle c0opc_and. Update algorithms for c0opc_mov,
142 c0opc_l32r, c0opc_s32i to take into account dynamic stack adjustments
144 Add cases for c0opc_l32e, c0opc_s32e, c0opc_rfwo, c0opc_rfwu.
145 (call0_analyze_prologue): Update the comments. Change arguments.
146 Add the variety of updates to handle extended prologues, which now can
147 conduct dynamic stack adjustments.
148 (call0_frame_cache): Likewise.
149 (xtensa_skip_prologue): Update call0_analyze_prologue () function call.
150 (xtensa_gdbarch_init): Initialize xtensa_session_once_reported.
152 2011-03-10 Michael Snyder <msnyder@vmware.com>
154 * tracepoint.c (cmd_qtv): Discard unused value 'packet'.
155 (cmd_qtframe): Ditto.
156 (cmd_qtbuffer): Ditto.
157 (cmd_bigqtbuffer): Ditto.
159 2011-03-10 Tom Tromey <tromey@redhat.com>
161 * tracepoint.c (trace_actions_command): Update.
162 * thread.c (thread_apply_command): Update.
163 * reverse.c (delete_bookmark_command): Update.
164 (bookmarks_info): Update.
165 * printcmd.c (undisplay_command): Update.
166 * memattr.c (mem_enable_command): Update.
167 (mem_disable_command): Update.
168 (mem_delete_command): Update.
169 * inferior.c (detach_inferior_command): Update.
170 (kill_inferior_command): Update.
171 (remove_inferior_command): Update.
172 * cli/cli-utils.h (struct get_number_or_range_state): New.
173 (init_number_or_range): Declare.
174 (get_number_or_range): Update.
175 * cli/cli-utils.c (init_number_or_range): New function.
176 (get_number_or_range): Change 'pp' parameter to 'state'. Remove
178 (number_is_in_list): Update.
179 * breakpoint.h (get_tracepoint_by_number): Update.
180 * breakpoint.c (map_breakpoint_numbers): Update for change to
182 (find_location_by_number): Use get_number, not
184 (trace_pass_set_count): New function.
185 (trace_pass_command): Update for change to get_number_or_range.
187 (get_tracepoint_by_number): Remove 'multi_p' parameter; add
190 2011-03-10 Phil Muldoon <pmuldoon@redhat.com>
192 * python/py-param.c (add_setshow_generic): Add set/show callback
193 parameters. Register Python object context.
194 (get_show_value): New function.
195 (get_set_value): New function.
196 (call_doc_function): New function.
197 (get_doc_string): Move behind get_show_value/get_set_value.
199 2011-03-10 Andreas Tobler <andreast-list@fgznet.ch>
201 * fbsd-nat.c (fbsd_make_corefile_notes): Constify local `fname'.
203 2011-03-09 Maxim Grigoriev <maxim2405@gmail.com>
205 * xtensa-tdep.c (xtensa_read_register): Add comment.
206 (xtensa_write_register): Likewise.
207 (xtensa_hextochar): Add comment and update to match coding conventions.
208 (xtensa_frame_cache, xtensa_return_value): Follow coding conventions.
209 (execute_l32e, execute_s32e, execute_code): Update comments.
210 (xtensa_exception_handler_t): Update to match coding conventions.
211 (xtensa_insn_kind): Likewise.
213 2011-03-09 Michael Snyder <msnyder@vmware.com>
215 * mi-cmd-disas.c (mi_cmd_disassemble): Fix memory leak.
217 2011-03-09 Pedro Alves <pedro@codesourcery.com>
219 * nto-tdep.c (nto_find_and_open_solib): Constify local `base'.
221 2011-03-09 Tom Tromey <tromey@redhat.com>
223 * thread.c (restore_selected_frame): Handle frame_level == -1.
224 (make_cleanup_restore_current_thread): Use
225 get_selected_frame_if_set.
226 * frame.h (get_selected_frame_if_set): Declare.
227 * frame.c (get_selected_frame_if_set): New function.
229 2011-03-09 Pedro Alves <pedro@codesourcery.com>
231 * cli/cli-cmds.c (shell_escape): Use lbasename.
232 * coffread.c (coff_start_symtab): Constify parameter.
233 (complete_symtab): Constify `name' parameter.
234 (coff_symtab_read): Constify `filestring' local.
235 (coff_getfilename): Constify return and `result' local.
237 * fbsd-nat.c (fbsd_make_corefile_notes): Use lbasename.
238 * linux-fork.c (info_checkpoints_command): Use lbasename.
239 * linux-nat.c (linux_nat_make_corefile_notes): Use lbasename.
240 * minsyms.c (lookup_minimal_symbol): Use lbasename.
241 * nto-tdep.c (nto_find_and_open_solib): Use lbasename.
242 * procfs.c (procfs_make_note_section): Use lbasename.
243 * tui/tui-io.c (printable_part): Constity return and parameter.
245 (print_filename): Constify parameters, and local `s'.
246 (tui_rl_display_match_list): Constify local `temp'.
248 2011-03-09 Jan Kratochvil <jan.kratochvil@redhat.com>
251 2011-03-08 Jan Kratochvil <jan.kratochvil@redhat.com>
252 Fix DWARF-3+ DW_AT_accessibility default assumption.
253 * dwarf2read.c (dwarf2_add_field): Fix new_field->accessibility for
254 cu->header.version >= 3.
256 2011-03-09 Yao Qi <yao@codesourcery.com>
258 * common/Makefile.in: Remove.
259 * common/configure: Remove.
260 * common/configure.ac: Remove.
262 2011-03-09 Yao Qi <yao@codesourcery.com>
265 2011-02-11 Yao Qi <yao@codesourcery.com>
267 * common/Makefile.in: Add copyright header.
269 2011-02-11 Yao Qi <yao@codesourcery.com>
271 * Makefile.in: Remove signals.o from COMMON_OBS. Link
273 * configure.ac: Add common to sub dir.
274 * configure: Regenerate.
276 2011-03-08 Maxim Grigoriev <maxim2405@gmail.com>
278 * xtensa-tdep.c (call0_ret): New function.
279 (xtensa_skip_prologue): Speed up analysis.
281 2011-03-08 Maxim Grigoriev <maxim2405@gmail.com>
283 * xtensa-tdep.c (xtensa_register_reggroup_p): Count in all registers
284 while executing MI command -data-list-changed-registers.
286 2011-03-08 Maxim Grigoriev <maxim2405@gmail.com>
288 * xtensa-tdep.c (xtensa_read_register): New function.
289 (xtensa_write_register): New function.
290 (xtensa_find_register_by_name): New function.
291 (xtensa_windowed_frame_cache): Update comments in type description.
292 (xtensa_frame_cache): Likewise.
293 (xtensa_window_interrupt_insn): New function.
294 (xtensa_frame_cache): Add analysis for Xtensa Window Exception frames.
295 (xtensa_insn_kind): Add new instructions.
296 (rwx_special_register): New function.
297 (call0_classify_opcode): Add new instructions to the analysis.
298 (a0_saved, a7_saved, a11_saved): New variables.
299 (a0_was_saved, a7_was_saved, a11_was_saved): New variables.
300 (execute_l32e): New function.
301 (execute_s32e): New function.
302 (xtensa_exception_handler_t): New type.
303 (execute_code): New function.
304 (xtensa_window_interrupt_frame_cache): New function to conduct frame
305 analysis for Xtensa Window Exception handlers.
307 2011-03-08 Maxim Grigoriev <maxim2405@gmail.com>
309 * xtensa-tdep.c (TX_PS): New.
310 (windowing_enabled): Update to count for Call0 ABI.
311 (xtensa_hextochar): New.
312 (xtensa_init_reggroups): Make algorithm generic.
313 (xtensa_frame_cache): Use TX_PS on Tiny Xtensa.
315 2011-03-08 Maxim Grigoriev <maxim2405@gmail.com>
317 * xtensa-tdep.h (XTENSA_MAX_COPROCESSOR): Update.
319 2011-03-08 Michael Snyder <msnyder@vmware.com>
321 * i386-tdep.c (i386_follow_jump): Check return value of
323 (i386_analyze_struct_return): Ditto.
324 (i386_skip_probe): Ditto.
325 (i386_match_insn): Ditto.
326 (i386_skip_noop): Ditto.
327 (i386_analyze_frame_setup): Ditto.
328 (i386_analyze_register_saves): Ditto.
329 (i386_skip_prologue): Ditto.
330 (i386_skip_main_prologue): Ditto.
332 * target.c (read_whatever_is_readable): Fix memory leak.
334 * i386-tdep.c (i386_process_record): Document fall through.
336 2011-03-08 Jan Kratochvil <jan.kratochvil@redhat.com>
338 Fix DWARF-3+ DW_AT_accessibility default assumption.
339 * dwarf2read.c (dwarf2_add_field): Fix new_field->accessibility for
340 cu->header.version >= 3.
342 2011-03-08 Pedro Alves <pedro@codesourcery.com>
344 * remote.c (remote_check_symbols): Skip if the target has no
347 2011-03-08 Joel Brobecker <brobecker@adacore.com>
349 * target.c (read_whatever_is_readable): Reformat comment,
350 with a minor typo fix. Minor reformatting of the code.
352 2011-03-08 Yao Qi <yao@codesourcery.com>
354 * arm-tdep.c: Remove prototype declaration displaced_in_arm_mode.
355 (displaced_read_reg): Add `dsc' parameter, remove `from' parameter.
356 Use cached result instead of calling displaced_in_arm_mode again.
357 (branch_write_pc, alu_write_pc, load_write_pc): Add `dsc' parameter.
358 (displaced_write_reg, copy_preload, copy_preload_reg): Callers update.
359 (cleanup_copro_load_store, copy_copro_load_store): Likewise.
360 (cleanup_branch, copy_bx_blx_reg, copy_alu_imm): Likewise.
361 (cleanup_alu_reg, copy_alu_reg, cleanup_alu_shifted_reg): Likewise.
362 (copy_alu_shifted_reg, cleanup_load, cleanup_store): Likewise.
363 (copy_extra_ld_st, copy_ldr_str_ldrb_strb): Likewise.
364 (cleanup_block_load_all, cleanup_block_store_pc): Likewise.
365 (cleanup_block_load_pc, copy_block_xfer): Likewise.
366 * arm-linux-tdep.c (arm_linux_copy_svc): Callers update.
367 (arm_catch_kernel_helper_return): Likewise.
368 * gdb/arm-tdep.h : Update function declarations.
370 2011-03-07 Michael Snyder <msnyder@vmware.com>
372 * dwarf2loc.c (indirect_pieced_value): Assert 'piece' not null.
374 * ser-unix.c (hardwire_get_tty_state): Stop memory leak.
376 * mi/mi-cmd-env.c (_initialize_mi_cmd_env): Free environment.
378 * elfread.c (elf_symtab_read): Stop memory leak.
380 * main.c (captured_main): Fix memory leak.
382 2011-03-07 Andreas Schwab <schwab@linux-m68k.org>
384 * ada-lang.c (compare_names): Call is_name_suffix with string1
387 2011-03-07 Tom Tromey <tromey@redhat.com>
389 * xcoffread.c (xcoff_sym_fns): Update.
390 * symfile.h (struct sym_fns) <sym_read_psymbols>: New field.
391 (enum symfile_add_flags) <SYMFILE_NO_READ>: New constant.
392 * symfile.c (syms_from_objfile): Handle SYMFILE_NO_READ.
393 (symbol_file_add_with_addrs_or_offsets): Likewise.
394 (reread_symbols): Handle OBJF_PSYMTABS_READ.
395 * somread.c (som_sym_fns): Update.
396 * psymtab.h (require_partial_symbols): Declare.
397 * psymtab.c (require_partial_symbols): New function.
398 (ALL_OBJFILE_PSYMTABS_REQUIRED): New macro.
399 (ALL_OBJFILE_PSYMTABS): Undef.
400 (ALL_PSYMTABS): Move from psympriv.h.
401 (lookup_partial_symtab, find_pc_sect_psymtab)
402 (lookup_symbol_aux_psymtabs, relocate_psymtabs)
403 (find_last_source_symtab_from_partial)
404 (forget_cached_source_info_partial)
405 (print_psymtab_stats_for_objfile, read_symtabs_for_function)
406 (expand_partial_symbol_tables, read_psymtabs_with_filename)
407 (map_symbol_names_psymtab, map_symbol_filenames_psymtab)
408 (find_symbol_file_from_partial, map_matching_symbols_psymtab)
409 (expand_symtabs_matching_via_partial, maintenance_info_psymtabs):
410 Use ALL_OBJFILE_PSYMTABS_REQUIRED.
411 * psympriv.h (ALL_PSYMTABS): Move to psymtab.c.
412 * objfiles.h (OBJF_PSYMTABS_READ): New macro.
413 * objfiles.c (objfile_has_partial_symbols): Handle lazily-read
415 * mipsread.c (ecoff_sym_fns): Update.
416 * machoread.c (macho_sym_fns): Update.
417 * elfread.c (elf_symfile_read): Set up for lazy psymtab reading.
418 (read_psyms): New function.
419 (elf_sym_fns, elf_sym_fns_gdb_index): Update.
420 (elf_sym_fns_lazy_psyms): New global.
421 * dwarf2read.c (dwarf2_initialize_objfile): Don't call
422 dwarf2_build_psymtabs.
423 * dbxread.c (aout_sym_fns): Update.
424 * coffread.c (coff_sym_fns): Update.
426 2011-03-07 Tom Tromey <tromey@redhat.com>
428 * infrun.c (print_exited_reason): Include inferior id and pid in
431 2011-03-07 Tom Tromey <tromey@redhat.com>
433 * target.h (struct target_ops) <to_has_execution>: Add ptid_t
435 (target_has_execution_1): Update.
436 (target_has_execution_current): Declare.
437 (target_has_execution): Call target_has_execution_current.
438 (default_child_has_execution): Update.
439 * target.c (default_child_has_execution): Add 'the_ptid'
441 (target_has_execution_1): Likewise.
442 (target_has_execution_current): New function.
443 (add_target): Update.
444 (init_dummy_target): Update.
445 * remote-m32r-sdi.c (m32r_has_execution): New function.
446 (init_m32r_ops): Use it.
447 * record.c (record_core_has_execution): Now static. Add
448 'the_ptid' parameter.
449 * inferior.c (have_live_inferiors): Don't save current thread.
450 Use target_has_execution_1.
452 2011-03-07 Yao Qi <yao@codesourcery.com>
454 * Makefile.in (aclocal_m4_deps): Remove gnulib/m4/memcmp.m4.
456 2011-03-07 Joel Brobecker <brobecker@adacore.com>
458 * elfread.c (elf_symtab_read): Minor reformatting.
460 2011-03-07 Joel Brobecker <brobecker@adacore.com>
462 * objc-lang.c (selectors_info): Minor reformatting.
464 2011-03-07 Joel Brobecker <brobecker@adacore.com>
466 * ada-lang.c (compare_names): Add FALLTHROUGH comment.
468 2011-03-07 Joel Brobecker <brobecker@adacore.com>
469 Michael Snyder <msnyder@vmware.com>
471 * ada-valprint.c (ada_val_print_array): Move the declaration of
472 "byte_order" and "elttype" inside the block where these variables
473 are actually used. Remove some special handling for the case
474 where "elttype" and "eltlen" are null. Replace by a comment
475 and a couple of assertion checks.
477 2011-03-05 Michael Snyder <msnyder@vmware.com>
479 * source.c (add_path): Replace semicolon at end of block.
480 * dwarf2expr.c (execute_stack_op): Ditto.
482 2011-03-05 Mike Frysinger <vapier@gentoo.org>
484 * bfin-tdep.c: Include sim-regno.h and gdb/sim-bfin.h.
485 * configure.tgt (bfin-*-*linux*): Define gdb_sim.
486 (bfin-*-*): Likewise.
488 2011-03-05 Michael Snyder <msnyder@vmware.com>
490 * dwarf2expr.c (execute_stack_op): Delete superfluous semicolon.
491 * mdebugread.c (parse_symbol): Ditto.
492 * parse.c (parse_exp_in_context): Ditto.
493 * source.c (add_path): Ditto.
494 * utils.c (gnu_debuglink_crc32): Ditto.
495 * varobj.c (variable_language): Ditto.
497 * linux-tdep.c (linux_get_siginfo_type): Stop memory leak.
499 2011-03-04 Michael Snyder <msnyder@vmware.com>
501 * linux-fork.c (inferior_call_waitptid): Fix copy/paste error.
503 * symfile.c (simple_overlay_update): Check for null return value
504 from lookup_minimal_symbol.
506 * xml-syscall.c (syscall_start_syscall): Assert name is non null.
508 2011-03-04 Thiago Jung Bauermann <bauerman@br.ibm.com>
510 * eval.c (parse_and_eval_address_1): Remove function.
511 * linespec.c (decode_indirect): Call parse_to_comma_and_eval
512 instead of parse_and_eval_address_1.
513 * value.h (parse_and_eval_address_1): Remove prototype.
515 2011-03-04 Michael Snyder <msnyder@vmware.com>
517 * remote.c (putpkt_binary): Document that case stmt falls through.
519 2011-03-04 Thiago Jung Bauermann <bauerman@br.ibm.com>
521 * breakpointc (print_it_typical): Move NULL check from here...
522 (print_bp_stop_message): ... to here.
524 2011-03-04 Michael Snyder <msnyder@msnyder-server.eng.vmware.com>
526 * breakpoint.c (enable_command): Use break instead of continue,
527 and fill in a missing break.
528 (disable_command): Ditto.
530 2011-03-04 Ulrich Weigand <ulrich.weigand@linaro.org>
532 * inflow.c (terminal_init_inferior_with_pgrp): Copy ttystate.
533 (terminal_save_ours): Remove misleading comment.
534 (inflow_inferior_data_cleanup): Free ttystate.
535 (inflow_inferior_exit): Likewise.
536 (copy_terminal_info): Copy ttystate.
538 * serial.c (serial_copy_tty_state): New function.
539 * serial.h (serial_copy_tty_state): Add prototype.
540 (struct serial_ops): Add copy_tty_state callback.
541 * ser-base.c (ser_base_copy_tty_state): New function.
542 * ser-base.h (ser_base_copy_tty_state): Add prototype.
543 * ser-go32.c (dos_copy_tty_state): New function.
544 (dos_ops): Install copy_tty_state callback.
545 * ser-mingw.c (_initialize_ser_windows): Likewise.
546 * ser-pipe.c (_initialize_ser_pipe): Likewise.
547 * ser-unix.c (hardwire_copy_tty_state): New function.
548 (_initialize_ser_hardwire): Install it.
550 2011-03-04 Michael Snyder <msnyder@vmware.com>
552 * breakpoint.c (create_breakpoint): Add missing break statement.
554 Reverting this patch:
555 * infcall.c (call_function_by_hand): Add break statements for lint.
557 Reverting this patch:
558 * cli/cli-script.c (script_from_file): Add break for lint.
560 2011-03-04 Michael Snyder <msnyder@vmware.com>
562 * solib.c (reload_shared_libraries_1): Close memory leak.
564 2011-03-03 Tom Tromey <tromey@redhat.com>
567 * dwarf2read.c (process_psymtab_comp_unit): Handle case where
570 2011-03-03 Michael Snyder <msnyder@vmware.com>
572 * remote-fileio.c (remote_fileio_func_fstat): Initialize all
573 fields of struct 'st' to zero.
575 * tui/tui-winsource.c (tui_update_source_window_as_is): Initialize
576 sal.pspace before calling set_current_source_symtab_and_line.
578 2011-03-03 Yao Qi <yao@codesourcery.com>
580 * Makefile.in (configure-common): Remove. Let Makefile
581 in dir common to rebuild itself.
582 (common/Makefile): Likewise.
584 2011-03-03 Joel Brobecker <brobecker@adacore.com>
586 * utils.c (parse_escape): Add i18n markup in error message.
588 2011-03-03 Yao Qi <yao@codesourcery.com>
590 * gdb/arm-tdep.c (shifted_reg_val): Replace magic number 15 with
592 (thumb_get_next_pc_raw, arm_get_next_pc_raw): Likewise.
593 (displaced_write_reg, displaced_read_reg): Likewise.
594 (copy_ldr_str_ldrb_strb, cleanup_block_load_all): Likewise.
595 (cleanup_block_load_pc, copy_block_xfer): Likewise.
596 (cleanup_branch): Replace magic number 14 and 15 with
597 ARM_LR_REGNUM and ARM_PC_REGNUM respectively.
599 2011-03-02 Michael Snyder <msnyder@vmware.com>
601 * maint.c (maintenance_do_deprecate): No need to check for NULL.
603 * cli/cli-script.c (script_from_file): Add break for lint.
605 * mdebugread.c (parse_partial_symbols): Fix indent.
607 * target-descriptions.c (tdesc_gdb_type): No need to call
608 xstrdup, callee saves a copy.
610 * printcmd.c (print_scalar_formatted): Use strncpy for safety.
612 * infcall.c (call_function_by_hand): Add break statements for lint.
614 * utils.c (parse_escape): Escape the escape char.
616 * python/py-inferior.c (build_inferior_list): Error out if
618 (gdbpy_inferiors): Error out if build_inferior_list fails.
620 * linux-nat.c (linux_nat_xfer_partial): Preserve errno around
623 * record.c (record_restore): Move printf to before error return.
625 2011-03-02 Yao Qi <yao@codesourcery.com>
627 * arm-tdep.h (struct displaced_step_closure): Add two new fields
628 is_thumb and insn_size.
629 * arm-tdep.c (displaced_read_reg): Adjust correct pipeline offset
630 on both ARM and Thumb mode.
631 (arm_process_displaced_insn): Set is_thumb and insn_size.
632 (arm_displaced_init_closure): Handle both 16-bit and 32-bit.
633 (arm_displaced_step_fixup): Likewise.
635 2011-03-01 Michael Snyder <msnyder@vmware.com>
637 * cli/cli-dump.c (dump_bfd_file): Check error return and warn.
639 * jv-lang.c (evaluate_subexp_java): Conditional can't be true.
641 * dwarf2read.c (dwarf2_compute_name): NAME cannot be null here.
643 * cli/cli-dump.c (restore_binary_file): Validate ftell return value.
645 * ada-lang.c (ada_make_symbol_completion_list): Replace malloc
648 * ada-lang.c (aggregate_assign_others): Rename inner scope variable
649 which shadows function parameter.
651 * tracepoint.c (create_tsv_from_upload): Superfluous call
652 to xstrdup. Callee already calls xstrdup.
654 * linespec.c (decode_line_1): Remove unnecessary null check.
656 * tracepoint.c (scope_info): Fix mem leak, remove underused
659 * python/py-prettyprint.c (apply_val_pretty_printer): Remove
660 superfluous null check.
662 * std-regs.c (value_of_builtin_frame_pc_reg): Frame can't be null.
663 (value_of_builtin_frame_fp_reg): Ditto.
665 * event-top.c (display_gdb_prompt): Remove superfluous null check.
667 * python/py-prettyprint.c (apply_val_pretty_printer): VAL may
670 * linespec.c (decode_line_1): Check for null before dereference.
672 * reverse.c (record_restore): Move null-check to before pointer
675 * python/py-utils.c (gdbpy_obj_to_string): Delete unused variable.
677 * objc-lang.c (selectors_info): Add explanitory comment.
678 (classes_info): Ditto.
680 2011-03-01 Ulrich Weigand <ulrich.weigand@linaro.org>
682 * arm-linux-tdep.c (ARM_LDR_PC_SP_4): Add define.
683 (arm_linux_restart_syscall_init): Handle both on-stack and in-kernel
684 versions of the trampoline. Handle Thumb vs. ARM addresses.
685 (arm_kernel_linux_restart_syscall_tramp_frame): New global.
686 (arm_linux_init_abi): Install it.
687 * arm-tdep.c (arm_psr_thumb_bit): Make global.
688 * arm-tdep.c (arm_psr_thumb_bit): Add prototype.
690 2011-02-28 Michael Snyder <msnyder@vmware.com>
692 * ui-out.c (ui_out_field_core_addr): Make local char buffer
693 a little bigger, to avoid possibility of an overflow.
695 * breakpoint.c (breakpoint_adjustment_warning): Make local char
696 buffers a little bigger, to avoid possibility of an overflow.
698 * coffread.c (coff_getfilename): Add check to avoid overflow.
700 * objc-lang.c (selectors_info): Add a small safety margin to
702 (classes_info): Error out on too long REGEXP.
704 * infrun.c (handle_inferior_event): Remove unused function call.
706 * fork-child.c (fork_inferior): Remove ifdef'd code and
709 * linux-thread-db.c (attach_thread): Discard unused value.
711 * linux-nat.c (linux_handle_extended_wait): Delete unused variable.
713 * remote.c (remote_get_noisy_reply): Discard unused value.
714 (remote_vcont_resume): Ditto.
715 (remote_stop_ns): Ditto.
717 * linespec.c (decode_objc): Delete unused variable.
719 * tui/tui-regs.c (tui_register_format): Delete unused variable.
721 * dwarf2read.c (add_partial_symbol): Discard unused values.
722 (read_base_type): Delete unused variable.
724 * dbxread.c (read_dbx_symtab): Discard unused value.
726 * eval.c (evaluate_subexp_standard): Delete unused variable,
727 and discard unused values.
729 * infcmd.c (_initialize_infcmd): Discard unused values.
731 * stabsread.c (rs6000_builtin_type): Missing break statement.
733 * dbxread.c (process_one_symbol): Discard unused value.
735 * coffread.c (coff_end_symtab): Delete unused variable.
737 * dwarf2read.c (dw2_get_file_names): Discard unused value.
738 (dwarf2_add_typedef): Delete unused variable.
739 (read_namespace): Ditto.
740 (dwarf_decode_macros): Ditto.
742 * m2-lang.c (evaluate_subexp_modula2): Discard unused variable.
744 * opencl-lang.c (evaluate_subexp_opencl): Discard unused value.
746 * p-valprint.c (pascal_val_print): Discard unused value.
748 * utils.c (nquery): Call va_end before return;
752 * proc-service.c (ps_plog): Call va_end before return.
754 2011-02-28 Tom Tromey <tromey@redhat.com>
756 * python/python.c (gdbpy_value_cst): New global.
757 (_initialize_python): Initialize it.
758 * python/python-internal.h (gdbpy_value_cst): Declare.
759 * python/py-value.c (convert_value_from_python): Use
762 2011-02-28 Michael Snyder <msnyder@vmware.com>
764 * python/py-cmd.c (cmdpy_init): Fix memory leak.
766 * breakpoint.c (catch_syscall_completer): Free malloced list.
768 * jv-lang.c (java_primitive_type_from_name): Add missing break.
770 * opencl-lang.c (lval_func_check_validity): Rename inner variables.
771 (lval_func_check_synthetic_pointer): Ditto.
772 (lval_func_free_closure): Fix use-after-free.
774 2011-02-28 Tom Tromey <tromey@redhat.com>
776 * psymtab.c (expand_partial_symbol_tables): Use
777 ALL_OBJFILE_PSYMTABS.
779 2011-02-28 Jan Kratochvil <jan.kratochvil@redhat.com>
781 * objc-lang.c (selectors_info): Error on too long REGEXP.
783 2011-02-28 Michael Snyder <msnyder@vmware.com>
785 * python/py-param.c (set_parameter_value): Add missing
788 * linux-record.c (record_linux_system_call): Add missing
791 2011-02-28 Ulrich Weigand <uweigand@de.ibm.com>
793 * breakpoint.c (print_one_breakpoint_location): Remove unused
794 argument PRINT_ADDRESS_BITS. Update callers.
795 (print_one_breakpoint): Likewise.
797 2011-02-28 Ulrich Weigand <uweigand@de.ibm.com>
799 * breakpoint.c (wrap_indent_at_field): New function.
800 (print_breakpoint_location): Use it instead of WRAP_INDENT argument.
801 Allocate ui_stream locally instead of using STB argument.
802 (print_one_breakpoint_location): Update call.
803 * ui-out.c (ui_out_query_field): New function.
804 * ui-out.h (ui_out_query_field): Add prototype.
806 2011-02-28 Joel Brobecker <brobecker@adacore.com>
808 From Michael Snyder <msnyder@vmware.com>
809 * ada-exp.y (write_object_renaming): Add FALLTHROUGH comment.
811 2011-02-27 Michael Snyder <msnyder@vmware.com>
813 * objc-lang.c (selectors_info): Prevent string overrun.
815 * tui/tui-stack.c (tui_get_function_from_frame): Fix off by one
818 * symtab.c (rbreak_command): Move variable 'file_name' to
821 * d-valprint.c (dynamic_array_type): Avoid shadowing a function
822 param with a local variable of the same name.
824 2011-02-27 Michael Snyder <msnyder@vmware.com>
826 * value.c (value_from_history_ref): New function.
827 * value.h (value_from_history_ref): Export.
828 * cli/cli-utils.c (get_number_trailer): Use value_from_history_ref
829 to parse value history references.
830 * cli/cli-utils.h (get_number_trailer): Update comment.
832 2011-02-27 Michael Snyder <msnyder@vmware.com>
834 * inferior.c (detach_inferior_command): Use get_number_or_range.
835 (kill_inferior_command): Ditto.
836 (remove_inferior_command): Ditto.
837 (initialize_inferiors): Make command names plural.
840 2011-02-27 Michael Snyder <msnyder@vmware.com>
842 * darwin-nat-info.c: Fix comment typo.
843 * dwarf2expr.h: Ditto.
846 * frame-unwind.h: Ditto.
848 * hppa-hpux-tdep.c: Ditto.
849 * i386-linux-nat.c: Ditto.
850 * linux-nat.c: Ditto.
853 * ppc-linux-tdep.c: Ditto.
856 * tui/tui-winsource.c: Ditto.
858 2011-02-26 Michael Snyder <msnyder@vmware.com>
860 * breakpoint.c (reattach_breakpoints): Avoid resource leak (ui_file).
862 * maint.c (maintenance_do_deprecate): Plug a memory leak.
864 * dwarf2loc.c (insert_bits): Avoid shadowing a function param
865 with a local variable of the same name.
867 * i387-tdep.c (i387_supply_fxsave): Avoid shadowing a function
868 param with a local variable of the same name.
869 (i387_supply_xsave): Ditto.
871 * linux-low.c (linux_nat_xfer_osdata): Rename local variable so
872 that it does not shadow a function parameter.
874 * i386-nat.c (i386_length_and_rw_bits): Document that case
875 statement is meant to fall through.
877 * expprint.c (dump_subexp_body_standard): Document that case
878 statement is meant to fall through.
880 * amd64-linux-tdep.c (amd64_linux_syscall_record): Delete
881 dead if statement. Condition can't be false.
883 2011-02-25 Michael Snyder <msnyder@vmware.com>
885 * arm-tdep.c: Fix typos in comments.
886 * bsd-uthread.c: Ditto.
887 * completer.c: Ditto.
889 * cp-namespace.c: Ditto.
890 * cp-support.c: Ditto.
891 * cris-tdep.c: Ditto.
893 * dwarf2read.c: Ditto.
897 * mdebugread.c: Ditto.
898 * mips-tdep.c: Ditto.
899 * ppc-linux-nat.c: Ditto.
900 * ppc-linux-tdep.c: Ditto.
902 * sol-thread.c: Ditto.
903 * solib-frv.c: Ditto.
905 * sparc64-tdep.c: Ditto.
907 * stabsread.c: Ditto.
912 * python/py-block.c: Ditto.
913 * python/py-symbol.c: Ditto.
914 * python/py-symtab.c: Ditto.
915 * python/py-value.c: Ditto.
916 * tui/tui-win.c: Ditto.
918 2011-02-25 Michael Snyder <msnyder@vmware.com>
920 * inferior.c (print_inferior): Accept a string instead of an int
921 for requested_inferiors, and use get_number_or_range to parse it.
922 (info_inferiors_command): Pass args string to print_inferior.
923 (initialize_inferiors): Change help string for info inferiors.
924 * inferior.h (print_inferior): Export prototype change.
926 2011-02-25 Tom Tromey <tromey@redhat.com>
928 * common/ax.def (invalid2): Set to 0x31.
930 2011-02-25 Jan Kratochvil <jan.kratochvil@redhat.com>
932 * dwarf2loc.c (disassemble_dwarf_expression) <DW_OP_breg[0-9]+>: Use
934 (disassemble_dwarf_expression) <DW_OP_bregx>: Drop variable offset,
936 (disassemble_dwarf_expression) <DW_OP_fbreg>: Use L and plongest.
938 2011-02-24 Michael Snyder <msnyder@vmware.com>
940 * Makefile.in (clean): Make clean should remove generated files
941 observer.h and observer.inc.
943 2011-02-24 Joel Brobecker <brobecker@adacore.com>
945 Revert the following patch (not approved yet):
946 2011-02-21 Hui Zhu <teawater@gmail.com>
947 * Makefile.in (HFILES_NO_SRCDIR): Add printcmd.h.
948 * ax-gdb.c (gen_printf_expr_callback): New function.
949 * ax-gdb.h (gen_printf_expr_callback): Forward declare.
950 * ax-general.c (ax_memcpy): New function.
951 (ax_print): Handle "printf".
953 * ax.h (ax_memcpy): Forward declare.
954 * common/ax.def (invalid2): Removed.
956 * printcmd.c (printcmd.h): New include.
957 (string_printf): New function.
958 (ui_printf): Removed.
959 (printf_command): Remove static. Call string_printf.
960 (eval_command): Call string_printf.
961 * printcmd.h: New file.
962 * tracepoint.c (validate_actionline,
963 encode_actions_1): handle printf_command.
965 2011-02-23 Tom Tromey <tromey@redhat.com>
967 * ax-general.c (ax_pick): Add missing newline.
969 2011-02-23 Michael Snyder <msnyder@vmware.com>
971 * breakpoint.c (breakpoint_1): Change first argument from an int
972 to a char pointer, so that the function now accepts a list of
973 breakpoints rather than just one. Use new function
974 'number_is_in_list' to implement.
975 (breakpoints_info): Pass char * instead of int to breakpoint_1.
976 (watchpoints_info): Ditto.
977 (tracepoints_info): Ditto.
978 (maintenance_info_breakpoints): Ditto.
979 (_initialize_breakpoint): Update help strings to reflect the fact
980 that these functions can now take more than one argument.
981 * cli/cli-utils.c (number_is_in_list): New function.
982 * cli/cli-utils.h (number_is_in_list): Export.
984 2011-02-23 Michael Snyder <msnyder@vmware.com>
986 * memattr.c (mem_enable_command): Use get_number_or_range.
987 (mem_disable_command): Ditto.
988 (mem_delete_command): Ditto.
989 (_initialize_mem): Tweak usage message to reflect multiple
992 2011-02-22 Doug Evans <dje@google.com>
994 Add gdb.lookup_global_symbol python function.
996 * python/py-symbol.c (gdbpy_lookup_global_symbol): New function.
997 * python/python-internal.h (gdbpy_lookup_global_symbol): Declare it.
998 * python/python.c (GdbMethods): Add entry for lookup_global_symbol.
1000 2011-02-22 Tom Tromey <tromey@redhat.com>
1002 * language.c (language_class_name_from_physname): Rename
1003 'curr_language' argument to 'lang'; use in body.
1005 2011-02-22 Michael Snyder <msnyder@vmware.com>
1007 * cli/cli-utils.c (number_is_in_list): Check for zero return.
1009 2011-02-22 Pedro Alves <pedro@codesourcery.com>
1011 * frame-unwind.h: Fix comment to mention the this frame, not the
1014 2011-02-22 Tom Tromey <tromey@redhat.com>
1016 * symfile.c (auto_solib_limit): Remove.
1017 * symfile.h (auto_solib_limit): Remove.
1019 2011-02-22 Joel Brobecker <brobecker@adacore.com>
1021 * Makefile.in (INSTALLED_LIBS): Delete. Update comment.
1023 2011-02-21 Michael Snyder <msnyder@vmware.com>
1025 * gdbthread.h (print_thread_info): Change prototype.
1026 * thread.c (print_thread_info): Accept char* instead of int for
1027 requested_threads argument. Use new function number_is_in_list
1028 to determine which threads to list.
1029 (info_threads_command): Pass char* to print_thread_info.
1030 * cli/cli-utils.c (number_is_in_list): New function.
1031 * cli/cli-utils.h (number_is_in_list): Export.
1032 * mi/mi-main.c (mi_cmd_thread_info): Pass char* to
1034 (print_one_inferior): Ditto.
1035 (mi_cmd_list_thread_groups): Ditto.
1037 2011-02-21 Jan Kratochvil <jan.kratochvil@redhat.com>
1039 * common/Makefile.in (CFLAGS): New.
1040 (COMPILE): Add $(CFLAGS).
1042 2011-02-21 Tom Tromey <tromey@redhat.com>
1044 * breakpoint.c (catch_syscall_command_1): Fix typo.
1046 2011-02-21 Tom Tromey <tromey@redhat.com>
1048 * reverse.c: Include cli-utils.h.
1049 * printcmd.c: Include cli-utils.h.
1050 (string_printf): Use skip_spaces.
1051 * cli/cli-utils.h: New file.
1052 * cli/cli-utils.c: New file.
1053 * cli/cli-dump.h (skip_spaces): Move to cli-utils.h.
1054 * cli/cli-dump.c (skip_spaces): Move to cli-utils.c.
1055 * breakpoint.h (get_number, get_number_or_range): Move to
1057 * breakpoint.c: Include cli-utils.h.
1058 (get_number_trailer, get_number, get_number_or_range)
1059 (ep_skip_leading_whitespace): Move to cli-utils.c.
1060 (create_breakpoint_sal, find_condition_and_thread)
1061 (decode_static_tracepoint_spec, watch_command_1)
1062 (watch_maybe_just_location, ep_parse_optional_if_clause)
1063 (catch_fork_command_1, catch_exec_command_1)
1064 (catch_syscall_command_1): Use skip_spaces, skip_to_space.
1065 * Makefile.in (SUBDIR_CLI_OBS): Add cli-utils.o.
1066 (SUBDIR_CLI_SRCS): Add cli-utils.c.
1067 (HFILES_NO_SRCDIR): Add cli-utils.h.
1068 (cli-utils.o): New target.
1070 2011-02-18 Pierre Muller <muller@ics.u-strasbg.fr>
1072 * remote.c (remote_close): Reset INFERIOR_PTID to NULL_PTID
1073 before calling discard_all_inferiors.
1075 2011-02-21 Ulrich Weigand <uweigand@de.ibm.com>
1077 * opencl-lang.c (STRUCT_OCL_TYPE): Remove.
1078 (struct builtin_opencl_type): Remove.
1079 (builtin_opencl_type): Change return type to "struct type **".
1080 (lookup_opencl_vector_type): Update caller.
1081 (opencl_language_arch_info): Copy primitive type vector from gdbarch.
1082 (build_opencl_types): Install plain array of "struct type *"
1083 instead of "struct builtin_opencl_type".
1085 2011-02-21 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
1086 Ulrich Weigand <uweigand@de.ibm.com>
1088 * arm-linux-nat.c: Include "observer.h" and "gdbthread.h".
1089 (PTRACE_GETHBPREGS, PTRACE_SETHBPREGS): Define.
1090 (struct arm_linux_hwbp_cap): New type.
1091 (arm_linux_get_hwbp_cap): New function.
1092 (arm_linux_get_hw_breakpoint_count): Likewise.
1093 (arm_linux_get_hw_watchpoint_count): Likewise.
1094 (arm_linux_can_use_hw_breakpoint): Likewise.
1095 (arm_hwbp_type): New type.
1096 (arm_hwbp_control_t): Likewise.
1097 (struct arm_linux_hw_breakpoint): Likewise.
1098 (struct arm_linux_thread_points): Likewise.
1099 (arm_threads): New global variable.
1100 (arm_linux_find_breakpoints_by_tid): New function.
1101 (arm_hwbp_control_initialize): Likewise.
1102 (arm_hwbp_control_is_enabled): Likewise.
1103 (arm_hwbp_control_disable): Likewise.
1104 (arm_linux_hw_breakpoint_initialize): Likewise.
1105 (arm_linux_get_hwbp_type): Likewise.
1106 (arm_linux_hw_watchpoint_initialize): Likewise.
1107 (arm_linux_hw_breakpoint_equal): Likewise.
1108 (arm_linux_insert_hw_breakpoint1): Likewise.
1109 (arm_linux_remove_hw_breakpoint1): Likewise.
1110 (arm_linux_insert_hw_breakpoint): Likewise.
1111 (arm_linux_remove_hw_breakpoint): Likewise.
1112 (arm_linux_region_ok_for_hw_watchpoint): Likewise.
1113 (arm_linux_insert_watchpoint): Likewise.
1114 (arm_linux_remove_watchpoint): Likewise.
1115 (arm_linux_stopped_data_address): Likewise.
1116 (arm_linux_stopped_by_watchpoint): Likewise.
1117 (arm_linux_watchpoint_addr_within_range): Likewise.
1118 (arm_linux_new_thread): Likewise.
1119 (arm_linux_thread_exit): Likewise.
1120 (_initialize_arm_linux_nat): Install hardware breakpoint/watchpoint
1121 related target callbacks. Register arm_linux_new_thread and
1122 arm_linux_thread_exit.
1123 * arm-tdep.h (arm_pc_is_thumb): Add prototype.
1124 * arm-tdep.c (arm_pc_is_thumb): Make global.
1125 (arm_gdbarch_init): Call set_gdbarch_have_nonsteppable_watchpoint.
1127 2011-02-21 Ulrich Weigand <uweigand@de.ibm.com>
1129 * breakpoint.c (update_watchpoint): Do not attempt to recreate
1130 per-frame locations while within a function epilogue.
1132 2011-02-21 Pierre Muller <muller@ics.u-strasbg.fr>
1134 * ser-mingw.c (ser_windows_close): Reformat comment to better conform
1135 to GNU coding standards.
1137 2011-02-21 Pierre Muller <muller@ics.u-strasbg.fr>
1139 Allow use of mingw native on Windows 95 OS.
1140 * ser-mingw.c (CancelIo): New macro for dynamically loaded DLL entry.
1141 (ser_windows_close): Only call CancelIo if function exists.
1142 (_initialize_ser_windows): Use LoadLirary/GetProcAddress
1143 to check for existence of CancelIo function in kernel32 DLL.
1145 2011-02-21 Hui Zhu <teawater@gmail.com>
1147 * Makefile.in (HFILES_NO_SRCDIR): Add printcmd.h.
1148 * ax-gdb.c (gen_printf_expr_callback): New function.
1149 * ax-gdb.h (gen_printf_expr_callback): Forward declare.
1150 * ax-general.c (ax_memcpy): New function.
1151 (ax_print): Handle "printf".
1153 * ax.h (ax_memcpy): Forward declare.
1154 * common/ax.def (invalid2): Removed.
1155 (printf): New entry.
1156 * printcmd.c (printcmd.h): New include.
1157 (string_printf): New function.
1158 (ui_printf): Removed.
1159 (printf_command): Remove static. Call string_printf.
1160 (eval_command): Call string_printf.
1161 * printcmd.h: New file.
1162 * tracepoint.c (validate_actionline,
1163 encode_actions_1): handle printf_command.
1165 2011-02-19 Michael Snyder <msnyder@vmware.com>
1167 * reverse.c (delete_one_bookmark): Argument is now bookmark
1168 id rather than pointer to bookmark struct.
1169 (delete_bookmark_command): Use get_number_or_range.
1170 (goto_bookmark_command): Parse with get_number instead of strtoul.
1171 (bookmark_1): New function. Print info for one bookmark.
1172 (bookmarks_info): Use get_number_or_range and bookmark_1.
1174 2011-02-18 Michael Snyder <msnyder@vmware.com>
1176 * thread.c (info_threads_command): Re-implement using
1177 get_number_or_range.
1178 (thread_apply_command): Ditto.
1180 2011-02-18 Tom Tromey <tromey@redhat.com>
1182 * common/ax.def: New file.
1183 * ax.h (enum agent_op): Use ax.def.
1184 * ax-general.c (aop_map): Use ax.def.
1186 2011-02-18 Tom Tromey <tromey@redhat.com>
1188 * ax-general.c (aop_map): Add pick and rot.
1189 * dwarf2loc.c (compile_dwarf_to_ax) <DW_OP_over>: Reimplement.
1190 <DW_OP_rot>: Implement.
1191 * ax.h (enum agent_op) <aop_pick, aop_rot>: New constants.
1193 * ax-general.c (ax_pick): New function.
1195 2011-02-18 Tom Tromey <tromey@redhat.com>
1197 * Makefile.in (HFILES_NO_SRCDIR): Don't mention ada-operator.inc.
1199 2011-02-18 Jan Kratochvil <jan.kratochvil@redhat.com>
1200 Tom Tromey <tromey@redhat.com>
1202 * cp-support.c (make_symbol_overload_list_namespace): Do not call
1203 make_symbol_overload_list_block with NULL BLOCK.
1204 * valarith.c (unop_user_defined_p): Resolve also TYPE_CODE_TYPEDEF.
1206 2011-02-18 Pedro Alves <pedro@codesourcery.com>
1208 * breakpoint.c (get_number_trailer): No longer accept a NULL PP.
1209 * breakpoint.h (get_number_or_range): Declare.
1210 * printcmd.c (ALL_DISPLAYS): Declare.
1211 (delete_display): Reimplement taking a display pointer.
1212 (undisplay_command): Accept a range of displays to delete, using
1213 get_number_or_range.
1215 2011-02-18 Pierre Muller <muller@ics.u-strasbg.fr>
1217 * c-valprint.c (c_val_print): Add embedded_offset to address
1218 for arrays of unspecified length.
1219 * p-valprint.c (pascal_val_print): Likewise.
1221 2011-02-18 Yao Qi <yao@codesourcery.com>
1223 * gdb/arm-tdep.c (arm_displaced_step_copy_insn): Move code to ...
1224 (arm_process_displaced_insn): .. here. Remove parameter INSN.
1225 (thumb_process_displaced_insn): New.
1226 * gdb/arm-linux-tdep.c (arm_linux_displaced_step_copy_insn): Update
1227 call to arm_process_displaced_insn.
1228 * gdb/arm-tdep.h : Update declaration of arm_process_displaced_insn.
1230 2011-02-17 Tom Tromey <tromey@redhat.com>
1232 * dwarf2loc.h (dwarf2_compile_expr_to_ax): Declare.
1233 * dwarf2loc.c (dwarf2_compile_expr_to_ax): Rename from
1234 compile_dwarf_to_ax. No longer static. Call
1235 dwarf2_compile_cfa_to_ax.
1236 (locexpr_tracepoint_var_ref): Update.
1237 (loclist_tracepoint_var_ref): Update.
1238 * dwarf2-frame.h (dwarf2_compile_cfa_to_ax): Declare.
1239 * dwarf2-frame.c (execute_cfa_program): Remove 'this_frame'
1240 argument; add 'gdbarch' and 'pc'.
1241 (dwarf2_compile_cfa_to_ax): New function.
1242 (dwarf2_frame_cache): Update.
1244 2011-02-17 Joel Brobecker <brobecker@adacore.com>
1246 * ada-lang.c (ada_type_of_array): Fix the size of the array
1247 in the case of an unconstrained packed array.
1249 2011-02-17 Yao Qi <yao@codesourcery.com>
1251 * common/Makefile.in: Add more targets for make.
1253 2011-02-16 Tom Tromey <tromey@redhat.com>
1255 * dwarf2loc.c (unimplemented): Fix typo.
1257 2011-02-16 Tom Tromey <tromey@redhat.com>
1259 * dwarf2loc.c (unimplemented): Handle unnamed opcodes.
1260 (compile_dwarf_to_ax) <default>: Use unimplemented.
1261 <DW_OP_deref>: Update.
1262 (disassemble_dwarf_expression): Update.
1263 * dwarf2read.c (dwarf_stack_op_name): Remove 'def' argument.
1264 (decode_locdesc): Update.
1265 * dwarf2expr.h (dwarf_stack_op_name): Update.
1267 2011-02-16 Tom Tromey <tromey@redhat.com>
1269 * ax.h (struct aop_map) <name>: Now const.
1271 2011-02-16 Tom Tromey <tromey@redhat.com>
1273 * ax-gdb.c.c (gen_expr) <UNOP_MEMVAL>: Handle value kinds other
1276 2011-02-16 Yao Qi <yao@codesourcery.com>
1278 * infrun.c (get_displaced_step_closure_by_addr): New.
1279 * inferior.h: Declare it.
1280 * arm-tdep.c: (arm_pc_is_thumb): Call
1281 get_displaced_step_closure_by_addr. Adjust MEMADDR if it
1284 2011-02-16 Pedro Alves <pedro@codesourcery.com>
1285 Jan Kratochvil <jan.kratochvil@redhat.com>
1288 * tracepoint.c (memrange_sortmerge): Fix list A's end calculation.
1290 2011-02-16 Pedro Alves <pedro@codesourcery.com>
1291 Jan Kratochvil <jan.kratochvil@redhat.com>
1293 * value.c (value_contents_copy_raw): Extend describing comment.
1294 Assert that the destination contents we're overwriting are wholly
1296 (value_contents_copy): Extend describing comment.
1298 2011-02-16 Pedro Alves <pedro@codesourcery.com>
1299 Jan Kratochvil <jan.kratochvil@redhat.com>
1301 * value.c (value_available_contents_eq): Remove redundant local
1302 variables. Fix available contents comparision.
1303 * value.h (value_available_contents_eq): Extend describing
1306 2011-02-16 Yao Qi <yao@codesourcery.com>
1308 * thread.c (info_threads_command): Add missing i18n markup and remove
1311 2011-02-15 Paul Pluzhnikov <ppluzhnikov@google.com>
1313 * breakpoint.c (longjmp_names): New variable.
1314 (struct breakpoint_objfile_data): New type.
1315 (breakpoint_objfile_key): New variable.
1316 (msym_not_found): New variable.
1317 (msym_not_found_p): New predicate.
1318 (get_breakpoint_objfile_data): New function.
1319 (create_overlay_event_breakpoint): Check per-objfile cache for
1321 (create_longjmp_master_breakpoint): Likewise.
1322 (create_std_terminate_master_breakpoint): Likewise.
1323 (create_exception_master_breakpoint): Likewise.
1324 (_initialize_breakpoint): Register per-objfile data key.
1326 2011-02-15 Paul Pluzhnikov <ppluzhnikov@google.com>
1328 * breakpoint.c ((create_overlay_event_breakpoint): Const-propagate
1330 (create_longjmp_master_breakpoint): Loop over longjmp names.
1331 (create_std_terminate_master_breakpoint): Const-propagate parameter
1333 (update_breakpoints_after_exec): Adjust.
1334 (breakpoint_re_set): Adjust.
1336 2011-02-15 Michael Snyder <msnyder@vmware.com>
1338 * thread.c (info_threads_command): Process arg as thread id,
1339 or list of thread ids.
1340 (thread_find_command): New command.
1341 (_initialize_thread): Document argument for info threads.
1342 Document 'thread find' command.
1343 * NEWS: Document new command "thread find".
1345 2011-02-15 Jan Kratochvil <jan.kratochvil@redhat.com>
1347 * Makefile.in (ACLOCAL_AMFLAGS): Add `-I ../config'.
1348 * aclocal.m4: Regenerated with aclocal-1.11.1.
1349 * common/configure: Regenerate with autoconf-2.64.
1351 2011-02-15 Ken Werner <ken.werner@de.ibm.com>
1353 * opencl-lang.c (build_opencl_types): Set the size of the built-in
1354 bool data type to a size of one byte.
1356 2011-02-15 Pedro Alves <pedro@codesourcery.com>
1357 Jan Kratochvil <jan.kratochvil@redhat.com>
1359 * target.c (memory_xfer_live_readonly_partial): Document where to
1360 look for interface description.
1362 2011-02-15 Yao Qi <yao@codesourcery.com>
1365 * arm-tdep.c (copy_ldr_str_ldrb_strb): Replace PC with SP in
1366 order to store PC value on stack instead of text section.
1368 2011-02-15 Thiago Jung Bauermann <bauerman@br.ibm.com>
1370 * rs6000-tdep.c (IS_EFP_PSEUDOREG): Use correct constant for
1371 the EFP register set size.
1372 (efpr_pseudo_register_read): Use regcache_raw_read_part to read
1373 data from the VMX register.
1374 (efpr_pseudo_register_write): Use regcache_raw_write_part to read
1375 and write data from/to the VMX register.
1377 2011-02-14 Michael Snyder <msnyder@vmware.com>
1379 * command.h (enum command_class): New class 'no_set_class', for
1380 "show" commands without a corresponding "set" command.
1381 * value.c (_initialize_values): Use 'no_set_class' for "show values".
1382 * copying.c (_initialize_copying): Ditto for "show copying" and
1384 * cli/cli-cmds.c (init_cli_cmds): Ditto for "show commands" and
1386 * cli/cli-setshow.c (cmd_show_list): Skip "show" commands for
1387 which there is no corresponding "set" command (eg. "show copying").
1389 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1390 Jan Kratochvil <jan.kratochvil@redhat.com>
1392 * exec.c (section_table_available_memory): Change `len' parameter
1394 * exec.h (section_table_available_memory): Ditto.
1395 * value.h (read_value_memory): Rename the `offset' parameter to
1398 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1399 Jan Kratochvil <jan.kratochvil@redhat.com>
1401 * memrange.c (compare_mem_ranges): Mention sort order in
1403 (normalize_mem_ranges): Add comment. Fix ra->length calculation.
1404 * tracepoint.c (traceframe_available_memory): Extend comment to
1405 mention what happens to RESULT when the target does not support
1408 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1409 Jan Kratochvil <jan.kratochvil@redhat.com>
1411 * value.c (mark_value_bytes_unavailable): Fix indexing the `bef'
1414 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1416 * value.c (value_bits_valid, value_bits_synthetic_pointer):
1417 No longer handle NULL values.
1419 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1421 * exceptions.h (NOT_AVAILABLE_ERROR): New error.
1422 * value.c: Include "exceptions.h".
1423 (require_available): Throw NOT_AVAILABLE_ERROR instead of a
1425 * cp-abi.c: Include gdb_assert.h.
1426 (baseclass_offset): Add `embedded_offset' and `val' parameters.
1427 Assert the method is implemented. Wrap NOT_AVAILABLE_ERROR
1429 * cp-abi.h (baseclass_offset): Add `embedded_offset' and `val'
1430 parameters. No longer returns -1 on error.
1431 (struct cp_abi_ops) <baseclass_offset>: Add `embedded_offset' and
1433 * cp-valprint.c: Include exceptions.h.
1434 (cp_print_value): Handle NOT_AVAILABLE_ERROR errors when fetching
1435 the baseclass_offset. Handle unavailable base classes. Use
1436 val_print_invalid_address.
1437 * p-valprint.c: Include exceptions.h.
1438 (pascal_object_print_value): Handle NOT_AVAILABLE_ERROR errors
1439 when fetching the baseclass_offset. No longer expect
1440 baseclass_offset returning -1. Handle unavailable base classes.
1441 Use val_print_invalid_address.
1442 * valops.c (dynamic_cast_check_1): Rename `contents' parameter to
1443 `valaddr' parameter, and change its type to gdb_byte pointer. Add
1444 `embedded_offset' and `val' parameters. Adjust.
1445 (dynamic_cast_check_2): Rename `contents' parameter to `valaddr'
1446 parameter, and change its type to gdb_byte pointer. Add
1447 `embedded_offset' and `val' parameters. Adjust. No longer expect
1448 baseclass_offset returning -1.
1449 (value_dynamic_cast): Use value_contents_for_printing rather than
1450 value_contents. Adjust.
1451 (search_struct_field): No longer expect baseclass_offset returning
1453 (search_struct_method): If reading memory from the target is
1454 necessary, wrap it in a new value to pass to baseclass_offset. No
1455 longer expect baseclass_offset returning -1.
1456 (find_method_list): No longer expect baseclass_offset returning
1457 -1. Use value_contents_for_printing rather than value_contents.
1458 * valprint.c (val_print_invalid_address): New function.
1459 * valprint.h (val_print_invalid_address): Declare.
1460 * gdbtypes.c (is_unique_ancestor_worker): New `embedded_offset'
1461 and `val' parameters. No longer expect baseclass_offset returning
1463 * gnu-v2-abi.c: Include "exceptions.h".
1464 (gnuv2_baseclass_offset): Add `embedded_offset' and `val'
1465 parameters. Handle unavailable memory. Recurse through
1466 gnuv2_baseclass_offset directly, rather than through
1467 baseclass_offset. No longer returns -1 on not found, instead
1469 * gnu-v3-abi.c (gnuv3_baseclass_offset): Add `embedded_offset' and
1470 `val' parameters. Adjust.
1472 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1474 * tracepoint.c (memrange_sortmerge): Don't merge ranges that are
1475 almost but not quite adjacent.
1477 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1479 * value.h (value_entirely_available): Declare.
1480 * value.c (value_entirely_available): New function.
1481 * c-valprint.c (c_value_print): Don't try fetching the pointer's
1482 real type if the pointer is unavailable.
1484 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1486 * valops.c (value_repeat): Use read_value_memory instead of
1489 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1491 * value.h (value_contents_copy, value_contents_copy_raw): Declare.
1492 * value.c (value_contents_copy_raw, value_contents_copy): New
1494 (value_primitive_field): Use value_contents_copy_raw instead of
1496 * valops.c (value_fetch_lazy): Use value_contents_copy instead of
1498 (value_array, value_slice): Ditto.
1499 * valarith.c (value_subscripted_rvalue): Use
1500 value_contents_copy_raw instead of memcpy.
1502 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1504 <unavailable> references.
1506 * valops.c (get_value_at): Use value_from_contents_and_address,
1507 avoiding read_memory.
1509 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1511 * c-valprint.c (c_val_print): Print a string with unavailable
1512 contents as an array.
1514 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1516 * value.h (unpack_bits_as_long): Delete declaration.
1517 (unpack_value_bits_as_long): Declare.
1518 (unpack_value_field_as_long): Declare.
1519 (value_field_bitfield): Declare.
1520 * value.c (unpack_bits_as_long): Rename to...
1521 (unpack_value_bits_as_long_1): ... this. Add embedded_offset and
1522 value parameters. Return the extracted result in a new output
1523 parameter. If the value contents are unavailable, return false,
1524 otherwise return true.
1525 (unpack_value_bits_as_long): New.
1526 (unpack_field_as_long): Rename to...
1527 (unpack_value_field_as_long_1): ... this. Add embedded_offset and
1528 Add embedded_offset and value parameters. Return the extracted
1529 result in a new output parameter. If the value contents are
1530 unavailable, return false, otherwise return true.
1531 (unpack_value_field_as_long): New.
1532 (unpack_field_as_long_1): New.
1533 (unpack_field_as_long): Reimplement as wrapper around
1534 unpack_value_field_as_long_1.
1535 (value_field_bitfield): New function.
1536 * valops.c (value_fetch_lazy): When fetching a bitfield, use
1537 unpack_value_bits_as_long. Mark the value as unavailable, if it
1539 * jv-valprint.c (java_print_value_fields): Use
1540 value_field_bitfield.
1541 * p-valprint.c (pascal_object_print_value_fields): Use
1542 value_field_bitfield.
1543 * cp-valprint.c (cp_print_value_fields): Use value_field_bitfield.
1545 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1547 * value.c (get_internalvar_integer): Also return the int value of
1548 TYPE_CODE_INT INTERNALVAR_VALUE values.
1549 (set_internalvar): Don't special case TYPE_CODE_INT.
1551 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1553 * value.c (struct internalvar) <enum internalvar_kind>: Remove
1554 INTERNALVAR_POINTER.
1556 (value_of_internalvar): Remove INTERNALVAR_POINTER handling.
1557 (set_internalvar): Remove special TYPE_CODE_PTR handling.
1558 (preserve_one_internalvar): Remove INTERNALVAR_POINTER handling.
1560 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1562 * value.h (value_available_contents_eq): Declare.
1563 * value.c (find_first_range_overlap): New function.
1564 (value_available_contents_eq): New function.
1565 * valprint.c (val_print_array_elements): Use
1566 value_available_contents_eq.
1567 * ada-valprint.c (val_print_packed_array_elements): Use
1568 value_available_contents_eq.
1569 * jv-valprint.c (java_value_print): Use
1570 value_available_contents_eq.
1572 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1574 * target.c (target_read_live_memory): New function.
1575 (memory_xfer_live_readonly_partial): New.
1576 (memory_xfer_partial): If reading from a traceframe, fallback to
1577 reading unavailable read-only memory from read-only regions of
1579 * tracepoint.c (disconnect_tracing): Adjust.
1580 (set_current_traceframe): New, factored out from
1581 set_traceframe_number.
1582 (set_traceframe_number): Reimplement to only change the traceframe
1583 number on the GDB side.
1584 (do_restore_current_traceframe_cleanup): Adjust.
1585 (make_cleanup_restore_traceframe_number): New.
1586 (cur_traceframe_number): New global.
1587 (tfile_open): Set cur_traceframe_number to no traceframe.
1588 (set_tfile_traceframe): New function.
1589 (tfile_trace_find): If looking up a traceframe using any method
1590 other than by number, make sure the current tfile traceframe
1591 matches gdb's current traceframe. Update the current tfile
1592 traceframe if the lookup succeeded.
1593 (tfile_fetch_registers, tfile_xfer_partial)
1594 (tfile_get_trace_state_variable_value): Make sure the remote
1595 traceframe matches gdb's current traceframe.
1596 * remote.c (remote_traceframe_number): New global.
1597 (remote_open_1): Set it to -1.
1598 (set_remote_traceframe): New function.
1599 (remote_fetch_registers, remote_store_registers)
1600 (remote_xfer_memory, remote_xfer_partial)
1601 (remote_get_trace_state_variable_value): Make sure the remote
1602 traceframe matches gdb's current traceframe.
1603 (remote_trace_find): If looking up a traceframe using any method
1604 other than by number, make sure the current remote traceframe
1605 matches gdb's current traceframe. Update the current remote
1606 traceframe if the lookup succeeded.
1607 * infrun.c (fetch_inferior_event): Adjust.
1608 * tracepoint.h (set_current_traceframe): Declare.
1609 (get_traceframe_number, set_traceframe_number): Add describing
1612 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1614 Mark pieces of values as unavailable if the corresponding memory
1617 * valops.c: Include tracepoint.h.
1618 (value_fetch_lazy): Use read_value_memory.
1619 (read_value_memory): New.
1620 * value.h (read_value_memory): Declare.
1621 * dwarf2loc.c (read_pieced_value): Use read_value_memory.
1622 * exec.c (section_table_available_memory): New function.
1623 * exec.h (section_table_available_memory): Declare.
1625 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1627 * Makefile.in (SFILES): Add memrange.c.
1628 (HFILES_NO_SRCDIR): Add memrange.h.
1629 (COMMON_OBS): Add memrange.o.
1630 * memrange.c: New file.
1631 * memrange.h: New file.
1632 * tracepoint.c: Include memrange.h.
1633 (struct mem_range): Delete.
1634 (mem_range_s): Delete.
1635 (traceframe_available_memory): New function.
1636 * tracepoint.h (traceframe_available_memory): Declare.
1638 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1640 * target.h (struct traceframe_info): Forward declare.
1641 (enum target_object): Add TARGET_OBJECT_TRACEFRAME_INFO.
1642 (struct target_ops) <to_traceframe_info>: New field.
1643 (target_traceframe_info): New.
1644 * target.c (update_current_target): Inherit and default
1646 * remote.c (PACKET_qXfer_traceframe_info): New.
1647 (remote_protocol_features): Register qXfer:traceframe-info:read.
1648 (remote_xfer_partial): Handle TARGET_OBJECT_TRACEFRAME_INFO.
1649 (remote_traceframe_info): New.
1650 (init_remote_ops): Install it.
1651 (_initialize_remote): Install "set/show remote traceframe-info"
1653 * tracepoint.h (parse_traceframe_info): Declare.
1654 * tracepoint.c (struct mem_range): New.
1655 (mem_range_s): New typedef.
1656 (struct traceframe_info): New.
1657 (traceframe_info): New global.
1658 (free_traceframe_info): New function.
1659 (clear_traceframe_info): New function.
1660 (start_tracing, tfind_1, set_traceframe_number): Clear traceframe
1662 (build_traceframe_info): New function.
1663 (tfile_traceframe_info): New function.
1664 (init_tfile_ops): Install tfile_traceframe_info.
1665 (traceframe_info_start_memory, free_result): New functions.
1666 (memory_attributes, traceframe_info_elements): New globals.
1667 (parse_traceframe_info, get_traceframe_info): New functions.
1668 * features/traceframe-info.dtd: New file.
1669 * Makefile.in (XMLFILES): Add traceframe-info.dtd.
1671 2011-02-14 Pedro Alves <pedro@codesourcery.com>
1673 Base support for <unavailable> value contents.
1675 * value.h (value_bytes_available): Declare.
1676 (mark_value_bytes_unavailable): Declare.
1677 * value.c (struct range): New struct.
1678 (range_s): New typedef.
1679 (ranges_overlap): New function.
1680 (range_lessthan): New function.
1681 (ranges_contain_p): New function.
1682 (struct value) <unavailable>: New field.
1683 (value_bytes_available): New function.
1684 (mark_value_bytes_unavailable): New function.
1685 (require_not_optimized_out): Constify parameter.
1686 (require_available): New function.
1687 (value_contents_all, value_contents): Require all bytes be
1689 (value_free): Free `unavailable'.
1690 (value_copy): Copy `unavailable'.
1691 * valprint.h (val_print_unavailable): Declare.
1692 * valprint.c (valprint_check_validity): Rename `offset' parameter
1693 to `embedded_offset'. If printing a scalar, check whether the
1694 value chunk is available.
1695 (val_print_unavailable): New.
1696 (val_print_scalar_formatted): Check whether the value is
1698 * python/py-prettyprint.c (apply_val_pretty_printer): Refuse
1699 pretty-printing unavailable values.
1701 2011-02-13 Jan Kratochvil <jan.kratochvil@redhat.com>
1703 Fix const/volatile qualifiers of C++ types, PR c++/12328.
1704 * c-typeprint.c (c_type_print_args): Update the function comment. New
1705 variable param_type, initialize it. Remove const/volatile qualifiers
1706 for language_cplus and !show_artificial. Use param_type.
1708 2011-02-13 Jan Kratochvil <jan.kratochvil@redhat.com>
1710 * symtab.c (find_pc_sect_line): New variable objfile, initialize it
1711 from S. Iterate S using ALL_OBJFILE_SYMTABS. Verify BV for each S.
1712 * symtab.h (struct symtab) <next>: Comment extension.
1714 2011-02-12 Yao Qi <yao@codesourcery.com>
1716 * Makefile.in (CLEANDIRS): Remove duplicated common dir.
1718 2011-02-11 Yao Qi <yao@codesourcery.com>
1720 * common/Makefile.in: Add copyright header.
1722 2011-02-11 Pedro Alves <pedro@codesourcery.com>
1724 * infrun.c (proceed): Move switching out and in of tfind mode from
1726 (fetch_inferior_event): ... to here.
1728 2011-02-11 Yao Qi <yao@codesourcery.com>
1730 * Makefile.in: Remove signals.o from COMMON_OBS. Link
1732 * configure.ac: Add common to sub dir.
1733 * configure: Regenerate.
1735 2011-02-11 Yao Qi <yao@codesourcery.com>
1739 * common/Makefile.in: New.
1740 * common/configure.ac: New.
1741 * common/aclocal.m4: New.
1742 * common/configure: Generate.
1744 2011-02-10 Pedro Alves <pedro@codesourcery.com>
1746 * vec.h (VEC_block_remove): Place VEC_ASSERT_INFO on the right
1747 side of the parenthesis.
1750 2010-07-13 Jakub Jelinek <jakub@redhat.com>
1751 * vec.h (VEC_block_remove): Fix comment.
1753 2011-02-08 Michael Snyder <msnyder@vmware.com>
1755 * linux-nat.c (linux_nat_filter_event): Fix typo in comment.
1757 2011-02-08 Jan Kratochvil <jan.kratochvil@redhat.com>
1759 * i386-tdep.c (i386_process_record): Rename l suffixes to d suffixes
1760 in comments for pcmpgtd, pcmpeqd, psubd, paddd, pcmpgtd, pcmpeqd,
1763 2011-02-08 Jan Kratochvil <jan.kratochvil@redhat.com>
1766 * i386-tdep.c (i386_process_record) <0x660f3807>: Fix the comment to
1768 (i386_process_record) <lddqu>: Fix the opcode to 0xf20ff0.
1769 (i386_process_record) <0x0f3807>: Fix the comment to phsubsw.
1771 2011-02-08 Ulrich Weigand <uweigand@de.ibm.com>
1773 * dwarf2read.c (read_subroutine_type): Set special calling
1774 convention flag for functions compiled by IBM XL C for OpenCL.
1775 * ppc-sysv-tdep.c: Include "dwarf2.h"
1776 (ppc_sysv_abi_push_dummy_call): Implement IBM OpenCL vector types
1778 (do_ppc_sysv_return_value): Add FUNC_TYPE argument. Implement
1779 IBM OpenCL vector types calling convention.
1780 (ppc_sysv_abi_return_value): Pass through FUNC_TYPE.
1781 (ppc_sysv_abi_broken_return_value): Likewise.
1782 (ppc64_sysv_abi_push_dummy_call): Implement IBM OpenCL vector
1783 types calling convention.
1784 (ppc64_sysv_abi_return_value): Likewise.
1785 * spu-tdep.c: Include "dwarf2.h"
1786 (spu_return_value): Implement IBM OpenCL vector types calling
1789 2011-02-08 Ulrich Weigand <uweigand@de.ibm.com>
1791 * ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): Implement
1792 correct ABI for AltiVec vector arguments.
1794 2011-02-07 Pedro Alves <pedro@codesourcery.com>
1796 * valprint.c (val_print): Extend comment.
1797 * ada-valprint.c (ada_valprint): Rewrite comment deferring
1798 interface explanation to val_print.
1799 (ada_val_print_array): Adjust comment to current interface.
1800 (print_field_values): Adjust comment to current interface.
1801 * c-valprint.c (c_val_print): Rewrite comment deferring interface
1802 explanation to val_print.
1803 * f-valprint.c (f_val_print): Ditto.
1804 * jv-valprint.c (java_val_print): Ditto.
1805 * m2-valprint.c (m2_val_print): Ditto.
1806 * p-valprint.c (pascal_val_print): Ditto.
1808 2011-02-07 Thiago Jung Bauermann <bauerman@br.ibm.com>
1810 * breakpoint.c (parse_breakpoint_sals): Fix description.
1812 2011-02-04 Sami Wagiaalla <swagiaal@redhat.com>
1813 Oguz Kayral <oguzkayral@gmail.com>
1815 * python/py-inferior.c (python_on_normal_stop): New function.
1816 (python_on_resume): New function.
1817 (python_inferior_exit): New function.
1818 (gdbpy_initialize_inferior): Add normal_stop, target_resumed, and
1819 inferior_exit observers.
1820 * python/py-evtregistry.c: New file.
1821 * python/py-threadevent.c : New file.
1822 * python/py-event.c: New file.
1823 * python/py-evts.c: New file.
1824 * python/py-continueevent.c: New file.
1825 * python/py-bpevent.c: New file.
1826 * python/py-signalevent.c: New file.
1827 * python/py-exetiedevent.c: New file.
1828 * python/py-breakpoint.c (gdbpy_breakpoint_from_bpstats): New function.
1829 Move struct breakpoint_object from here...
1830 * python/python-internal.h: ... to here.
1831 * python/py-event.h: New file.
1832 * python/py-events.h: New file.
1833 * Makefile.in (SUBDIR_PYTHON_OBS): Add py-breakpointstopevent.o,
1834 py-continueevent.o, py-event.o, py-eventregistry.o, py-events.o,
1835 py-exitedevent.o, py-signalstopevent.o, and py-stopevent.o.
1836 (SUBDIR_PYTHON_SRCS): Add py-breakpointstopevent.c,
1837 py-continueevent.c, py-event.c, py-eventregistry.c, py-events.c,
1838 py-exitedevent.c, py-signalstopevent.c, and py-stopevent.c.
1839 Add build rules for all the above.
1841 2011-02-04 Tom Tromey <tromey@redhat.com>
1843 * dwarf2read.c (dwarf2_section_empty_p): New function.
1844 (dwarf2_read_section): Use dwarf2_section_empty_p.
1845 (dwarf2_section_size): New function.
1846 (dwarf2_get_section_info): Unconditionally read section.
1847 (dwarf2_read_index): Use dwarf2_section_empty_p.
1848 (partial_read_comp_unit_head): Use dwarf2_section_size.
1849 (dwarf2_symbol_mark_computed): Likewise.
1851 2011-02-04 David Daney <ddaney@caviumnetworks.com>
1853 * NEWS: Add item for "catch syscall" on mips*-linux* targets.
1855 2011-02-04 David Daney <ddaney@caviumnetworks.com>
1857 * mips-linux-tdep.c: Include xml-syscall.h.
1858 (mips_linux_get_syscall_number): New function.
1859 (mips_linux_init_abi): Add calls to
1860 mips_linux_get_syscall_number() and set_xml_syscall_file_name().
1861 * data-directory/Makefile.in (SYSCALLS_FILES): Add
1862 mips-o32-linux.xml, mips-n32-linux.xml and mips-n64-linux.xml
1863 * syscalls/mips-n32-linux.xml: New file.
1864 * syscalls/mips-n64-linux.xml: New file.
1865 * syscalls/mips-o32-linux.xml: New file.
1867 2011-02-04 Ulrich Weigand <ulrich.weigand@linaro.org>
1869 * dwarf2read.c (dwarf2_ranges_read): Skip empty range entries.
1870 Complain about inverted range entries.
1871 (dwarf2_record_block_ranges): Likewise.
1873 2011-02-04 Thiago Jung Bauermann <bauerman@br.ibm.com>
1876 * breakpoint.c (update_watchpoint): Fix name of the
1877 update_global_location_list function.
1878 (print_one_breakpoint): Fix typo.
1879 (_initialize_breakpoint): Remove extra space in hbreak help
1881 * breakpoint.h (struct bp_location) <length>: Fix field
1884 2011-02-04 Pedro Alves <pedro@codesourcery.com>
1886 * regcache.c (registers_changed_ptid): Don't explictly always
1887 clear `current_regcache'. Only clear current_thread_ptid and
1888 current_thread_arch when PTID matches. Only reinit the frame
1889 cache if PTID matches the current inferior_ptid. Move alloca(0)
1891 (registers_changed): ... here.
1893 2011-02-03 Ulrich Weigand <ulrich.weigand@linaro.org>
1895 * arm-tdep.c (arm_skip_stack_protector): Accept any symbol that
1896 starts with __stack_chk_guard as stack guard symbol.
1898 2011-02-03 Andrew Burgess <aburgess@broadcom.com>
1900 * disasm.c (compare_lines): Handle the end of sequence markers
1901 within the line table to better support disassembling over
1902 compilation unit boundaries.
1904 2011-02-02 Ulrich Weigand <ulrich.weigand@linaro.org>
1906 * arm-tdep.c (skip_prologue_function): Add GDBARCH and IS_THUMB
1907 arguments. Skip in-prologue calls to glibc __aeabi_read_tp
1908 implementation even if no symbols are available.
1909 (thumb_analyze_prologue): Update call to skip_prologue_function.
1910 (arm_analyze_prologue): Likewise.
1912 2011-02-02 Ulrich Weigand <ulrich.weigand@linaro.org>
1914 * arm-tdep.c: Include "observer.h".
1915 (arm_prologue_this_id): Use frame PC if get_frame_func returns 0.
1916 (arm_exidx_data_key): New static variable.
1917 (struct arm_exidx_entry, arm_exidx_entry_s): New data types.
1918 (struct arm_exidx_data): Likewise.
1919 (arm_exidx_data_free): New function.
1920 (arm_compare_exidx_entries): Likewise.
1921 (arm_obj_section_from_vma): Likewise.
1922 (arm_exidx_new_objfile): Likewise.
1923 (arm_find_exidx_entry): Likewise.
1924 (arm_exidx_fill_cache): Likewise.
1925 (arm_exidx_unwind_sniffer): Likewise.
1926 (arm_exidx_unwind): New global variable.
1927 (arm_gdbarch_init): Append unwinder arm_exidx_unwind.
1928 (_initialize_arm_tdep): Attach arm_exidx_new_objfile to new_objfile
1929 observer. Register arm_exidx_data_key as objfile data.
1931 2011-02-02 Ulrich Weigand <ulrich.weigand@linaro.org>
1933 * arm-tdep.c (arm_analyze_load_stack_chk_guard): Avoid build break
1934 due to accessing uninitialized variable. Fix indentation.
1936 2011-02-02 Pedro Alves <pedro@codesourcery.com>
1938 * c-valprint.c (c_value_print): When doing virtual base pointer
1939 adjustment, create a new value with adjusted contents rather than
1940 changing the contents of the value being printed (and getting it
1943 2011-02-02 Pedro Alves <pedro@codesourcery.com>
1945 * xml-support.c (xml_find_attribute): New.
1946 (xinclude_start_include): Use it.
1947 * xml-support.h (xml_find_attribute): Declare.
1948 * memory-map.c (memory_map_start_memory)
1949 (memory_map_start_property): Use xml_find_attribute.
1950 * osdata.c (osdata_start_osdata, osdata_start_column): Use
1952 * remote.c (start_thread): Use xml_find_attribute.
1953 * solib-target.c (library_list_start_segment)
1954 (library_list_start_section, library_list_start_library)
1955 (library_list_start_list): Use xml_find_attribute.
1956 * xml-tdesc.c (tdesc_start_target, tdesc_start_feature)
1957 (tdesc_start_union, tdesc_start_struct, tdesc_start_flags)
1958 (tdesc_start_field): Use xml_find_attribute.
1960 2011-02-02 Ulrich Weigand <uweigand@de.ibm.com>
1962 * opencl-lang.c (STRINGIFY): Rename to OCL_STRING.
1963 (BUILD_OCL_VTYPES): Update.
1965 2011-02-02 Joel Brobecker <brobecker@adacore.com>
1967 * configure.ac: Work around non-GNU sed limitation when computing
1968 python version number.
1969 * configure: Regenerate.
1971 2011-02-01 Jan Kratochvil <jan.kratochvil@redhat.com>
1973 Fix debug printing of TYPE_INSTANCE.
1974 * expprint.c (print_subexp_standard) <TYPE_INSTANCE>: New.
1975 (dump_subexp_body_standard) <TYPE_INSTANCE>: New.
1977 2011-02-01 Jan Kratochvil <jan.kratochvil@redhat.com>
1979 Fix debug printing of BINOP_IN, OP_OBJC_MSGCALL,
1980 OP_F77_UNDETERMINED_ARGLIST, OP_COMPLEX, OP_OBJC_SELECTOR, OP_NAME,
1981 OP_OBJC_NSSTRING, OP_F90_RANGE and OP_DECFLOAT.
1982 * ada-operator.inc: Rename the file to ...
1983 * ada-operator.def: ... here, wrap all the entries by macro OP.
1984 * expprint.c (op_name_standard): Remove all the entries. Include
1985 "std-operator.def" instead.
1986 * expression.h (enum exp_opcode): Include "std-operator.def" and
1987 "ada-operator.def". Move all the entries ...
1988 * std-operator.def: ... here, wrap all the entries by macro OP.
1990 2011-01-31 Paul Pluzhnikov <ppluzhnikov@google.com>
1992 * breakpoint.h (remove_jit_event_breakpoints): New prototype.
1993 * breakpoint.c (remove_jit_event_breakpoints): New function.
1994 * jit.c (jit_descriptor_addr): Delete.
1995 (registering_code): Delete.
1996 (clear_int): Delete.
1997 (jit_inferior_data): New variable.
1998 (struct jit_inferior_data): New type.
1999 (get_jit_inferior_data): New function.
2000 (jit_inferior_data_cleanup): New function.
2001 (jit_read_descriptor): Adjust.
2002 (jit_register_code): Adjust.
2003 (jit_breakpoint_re_set_internal): New function; move code here ...
2004 (jit_inferior_init): ... from here.
2005 (jit_breakpoint_re_set): Adjust.
2006 (jit_reset_inferior_data_and_breakpoints): New function.
2007 (jit_inferior_created_observer): Adjust.
2008 (jit_inferior_exit_hook): Adjust.
2009 (jit_executable_changed_observer): New function.
2010 (jit_event_handler): Adjust.
2011 (_initialize_jit): Adjust.
2013 2011-01-31 Michael Snyder <msnyder@vmware.com>
2015 * m32r-tdep.c (m32r_gdbarch_init): Replace accidentally deleted
2018 2011-01-31 Tom Tromey <tromey@redhat.com>
2021 * python/python.c (execute_gdb_command): Call
2022 prevent_dont_repeat.
2023 * top.c (suppress_dont_repeat): New global.
2024 (dont_repeat): Use it.
2025 (prevent_dont_repeat): New function.
2026 * command.h (prevent_dont_repeat): Declare.
2028 2011-01-31 Tom Tromey <tromey@redhat.com>
2030 * infcmd.c (finish_backward): Use breakpoint_set_silent.
2031 * python/py-breakpoint.c (bppy_set_silent): Use
2032 breakpoint_set_silent.
2033 (bppy_set_thread): Use breakpoint_set_thread.
2034 (bppy_set_task): Use breakpoint_set_task.
2035 * breakpoint.h (breakpoint_set_silent, breakpoint_set_thread)
2036 (breakpoint_set_task): Declare.
2037 (make_breakpoint_silent): Remove.
2038 * breakpoint.c (breakpoint_set_silent): New function.
2039 (breakpoint_set_thread): Likewise.
2040 (breakpoint_set_task): Likewise.
2041 (make_breakpoint_silent): Remove.
2043 2011-01-31 Tom Tromey <tromey@redhat.com>
2045 * breakpoint.h (user_breakpoint_p): Declare.
2046 * breakpoint.c (user_breakpoint_p): New function.
2047 (breakpoint_1): Use it.
2048 (save_breakpoints): Likewise.
2050 2011-01-31 Joel Brobecker <brobecker@adacore.com>
2052 * configure.ac: Add handling of Python distribution on Windows.
2053 * python-config.py: If the LIBS, SYSLIBS, LIBPL and/or LINKFORSHARED
2054 sysconfig variables are not defined, then do not use them.
2055 On Windows, if LIBPL is not defined, then use prefix + '/libs'
2056 instead. On Windows, return all paths using forward-slashes
2057 rather than backslashes.
2059 2011-01-31 Joel Brobecker <brobecker@adacore.com>
2061 * configure.ac: Remove fallback behavior for building
2062 against Python. Remove tweaking of Python include path.
2063 Add PYTHON_CPPFLAGS and PYTHON_LIBS substitution.
2064 (AC_TRY_LIBPYTHON): Adjust program used in linking test.
2065 If link is successful, set PYTHON_CPPFLAGS and PYTHON_LIBS.
2066 Always restore CPPFLAGS and LIBS after linking test.
2067 * configure: Regenerated.
2068 * Makefile.in (INTERNAL_CPPFLAGS): Add @PYTHON_CPPFLAGS@.
2069 (INSTALLED_LIBS, CLIBS): Add @PYTHON_LIBS@.
2070 * python/python-internal.h: Adjust includes of Python .h files.
2072 2011-01-31 Joel Brobecker <brobecker@adacore.com>
2074 * tracepoint.c (traceframe_walk_blocks): Add missing i18n markup
2077 2011-01-31 Joel Brobecker <brobecker@adacore.com>
2079 * inflow.c (gdb_has_a_terminal): Fix typo in interactive_mode
2082 2011-01-31 Yao Qi <yao@codesourcery.com>
2084 * arm-linux-nat.c: Update calls to regcache_register_status
2085 instead of regcache_valid_p.
2086 * aix-thread.c: Likewise.
2087 * i386gnu-nat.c: Likewise.
2089 2011-01-29 Jan Kratochvil <jan.kratochvil@redhat.com>
2092 * valops.c (compare_parameters): Verify TYPE_NFIELDS before
2093 touching TYPE_FIELD_ARTIFICIAL.
2095 2011-01-28 Richard Earnshaw <rearnsha@arm.com>
2097 * MAINTAINERS: Move myself from Responsible Maintainers to Authorized
2100 2011-01-28 Pedro Alves <pedro@codesourcery.com>
2102 * tracepoint.c (tfile_xfer_partial): If there's no traceframe
2103 selected, don't try iterating over the traceframe's blocks.
2104 (tfile_has_stack): If there's no traceframe selected, then there's
2106 (tfile_has_registers): If there's no traceframe selected, then
2107 there's no registers.
2109 2011-01-28 Pedro Alves <pedro@codesourcery.com>
2111 * target.c (memory_xfer_partial): No need to restore shadows if we
2112 haven't read anything.
2114 2011-01-28 Pedro Alves <pedro@codesourcery.com>
2116 * mips-tdep.c (mips_print_register): Use get_frame_register_value
2117 and val_print_scalar_formatted.
2119 2011-01-27 Pedro Alves <pedro@codesourcery.com>
2121 * tracepoint.c (tfile_read): New.
2122 (tfile_open): Use it.
2123 (tfile_get_traceframe_address): Use it.
2124 (tfile_trace_find): Use it.
2125 (walk_blocks_callback_func): New typedef.
2126 (match_blocktype): New function.
2127 (traceframe_walk_blocks): New function.
2128 (traceframe_find_block_type): New function.
2129 (tfile_fetch_registers, tfile_xfer_partial)
2130 (tfile_get_trace_state_variable_value): Use
2131 traceframe_find_block_type and tfile_read.
2133 2011-01-26 Kevin Buettner <kevinb@redhat.com>
2135 * remote-mips.c: Add internationalization mark ups. Remove
2136 trailing \n from already marked up strings.
2138 2011-01-26 Tom Tromey <tromey@redhat.com>
2140 * python/py-prettyprint.c (print_string_repr): Clear
2141 'addressprint' option when calling val_print_string.
2142 (print_children): Handle Val_pretty_default. Clear 'addressprint'
2143 option when calling val_print_string.
2145 2011-01-26 Tom Tromey <tromey@redhat.com>
2147 * python/python.c (gdbpy_solib_name): Use gdb_py_longest and
2149 * python/python-internal.h (GDB_PY_LL_ARG, GDB_PY_LLU_ARG): New
2151 (gdb_py_longest, gdb_py_ulongest): New typedefs.
2152 (gdb_py_long_from_longest, gdb_py_long_from_ulongest)
2153 (gdb_py_long_as_ulongest): New defines.
2154 (gdb_py_object_from_longest, gdb_py_object_from_ulongest)
2155 (gdb_py_int_as_long): Declare.
2156 * python/py-value.c (valpy_lazy_string): Use gdb_py_longest,
2157 GDB_PY_LL_ARG, gdb_py_object_from_longest.
2158 (valpy_long): Add comment.
2159 * python/py-utils.c (get_addr_from_python): Use
2160 gdb_py_long_as_ulongest. Handle overflow properly.
2161 (gdb_py_object_from_longest): New function.
2162 (gdb_py_object_from_ulongest): Likewise.
2163 (gdb_py_int_as_long): Likewise.
2164 * python/py-type.c (typy_array): Use gdb_py_int_as_long.
2165 * python/py-symtab.c (salpy_get_pc): Use
2166 gdb_py_long_from_ulongest.
2167 (salpy_get_line): Use PyInt_FromLong.
2168 * python/py-param.c (set_parameter_value): Use
2170 * python/py-lazy-string.c (stpy_get_address): Use
2171 gdb_py_long_from_ulongest.
2172 * python/py-frame.c (frapy_pc): Use gdb_py_long_from_ulongest.
2173 * python/py-cmd.c (cmdpy_completer): Use gdb_py_int_as_long.
2174 * python/py-breakpoint.c (bppy_set_thread): Use
2176 (bppy_set_task): Likewise.
2177 (bppy_set_ignore_count): Likewise.
2178 (bppy_set_hit_count): Likewise.
2179 * python/py-block.c (blpy_get_start): Use
2180 gdb_py_object_from_ulongest.
2181 (blpy_get_end): Likewise.
2182 (gdbpy_block_for_pc): Use gdb_py_ulongest and GDB_PY_LLU_ARG.
2184 2011-01-25 Mathieu Lacage <mathieu.lacage@inria.fr>
2187 * gdb/objfiles.h (struct objfile) <addr_low>: New field.
2188 * gdb/solib.c (solib_read_symbols): Check for addr_low in
2189 equality test for objfile, initialize addr_low if needed.
2191 2011-01-25 Pedro Alves <pedro@codesourcery.com>
2193 * tui/tui-regs.c (tui_register_format): Remove dead code.
2195 2011-01-25 Pedro Alves <pedro@codesourcery.com>
2197 * printcmd.c (print_formatted): Use val_print_scalar_formatted
2198 instead of print_scalar_formatted.
2199 (print_scalar_formatted): Don't handle 's' format strings here,
2200 and add an assertion that we never see such format here.
2201 * valprint.h (val_print_scalar_formatted): Declare.
2202 * valprint.c (val_print_scalar_formatted): New.
2203 * c-valprint.c (c_val_print): Use val_print_scalar_formatted
2204 instead of print_scalar_formatted.
2205 * jv-valprint.c (java_val_print): Ditto.
2206 * p-valprint.c (pascal_val_print): Ditto.
2207 * ada-valprint.c (ada_val_print_1): Ditto.
2208 * f-valprint.c (f_val_print): Ditto.
2209 * infcmd.c (registers_info): Ditto.
2210 * m2-valprint.c (m2_val_print): Ditto.
2212 2011-01-25 Pedro Alves <pedro@codesourcery.com>
2214 * m2-valprint.c (print_unbounded_array): Pass
2215 value_contents_for_printing rather than value_contents, to
2216 m2_print_array_contents. Also pass in the value.
2218 2011-01-25 Jan Kratochvil <jan.kratochvil@redhat.com>
2220 * dwarf2read.c (dwarf2_read_index, write_psymtabs_to_index)
2221 (save_gdb_index_command): Switch to .gdb_index version 4.
2223 2011-01-25 Pedro Alves <pedro@codesourcery.com>
2225 * mi/mi-main.c (get_register): Use get_frame_register_value rather
2226 than frame_register, and always pass a valid value to val_print.
2228 2011-01-25 Pedro Alves <pedro@codesourcery.com>
2230 Centralize printing "<optimized out>".
2232 * valprint.h (val_print_optimized_out): Declare.
2233 * cp-valprint.c (cp_print_value_fields): Use
2234 val_print_optimized_out.
2235 * jv-valprint.c (java_print_value_fields): Ditto.
2236 * p-valprint.c (pascal_object_print_value_fields): Ditto.
2237 * printcmd.c (print_formatted): Ditto.
2238 * valprint.c (valprint_check_validity): Ditto.
2239 (value_check_printable): Ditto.
2240 (val_print_optimized_out): New.
2242 2011-01-25 Pedro Alves <pedro@codesourcery.com>
2244 * infcmd.c (default_print_registers_info): Allocate values so to
2245 never pass a NULL value to val_print.
2247 2011-01-25 Pedro Alves <pedro@codesourcery.com>
2249 * cp-valprint.c (cp_print_value): Treat the 'skip' local as
2250 boolean. Make sure to always pass a value that matches the
2251 contents buffer to callees. Preserve `address' for following
2253 * value.c (value_contents_for_printing_const): New.
2254 (value_address): Constify value argument.
2255 * value.h (value_contents_for_printing_const): Declare.
2256 (value_address): Constify value argument.
2258 2011-01-25 Pedro Alves <pedro@codesourcery.com>
2260 * regcache.c (struct regcache_descr): Rename
2261 sizeof_raw_register_valid_p field to sizeof_raw_register_status,
2262 and sizeof_cooked_register_valid_p to
2263 sizeof_cooked_register_status.
2264 (init_regcache_descr): Adjust.
2265 (struct regcache): Rename register_valid_p field to
2267 (regcache_xmalloc_1, regcache_xfree, regcache_save)
2268 (do_cooked_read): Adjust.
2269 (regcache_valid_p): Rename to ...
2270 (regcache_register_status): ... this. Adjust.
2271 (regcache_invalidate): Adjust.
2272 (regcache_raw_read, regcache_cooked_read, regcache_raw_write):
2274 (regcache_raw_supply): Adjust. If buf i NULL, mark the register
2275 as unavailable, not valid.
2276 (regcache_dump): Adjust.
2277 * regcache.h (enum register_status): New.
2278 (regcache_register_status): Declare.
2279 (regcache_invalidate): Delete declaration.
2280 * corelow.c (get_core_registers): Adjust.
2281 * tracepoint.c (tfile_fetch_registers): Adjust.
2282 * trad-frame.c (REG_VALUE): Rename to ...
2283 (TF_REG_VALUE): ... this.
2284 (REG_UNKNOWN): Rename to ...
2285 (TF_REG_UNKNOWN): ... this.
2286 (trad_frame_set_value, trad_frame_set_unknown): Adjust.
2287 * mi/mi-main.c (register_changed_p): Adjust.
2289 2011-01-25 Pedro Alves <pedro@codesourcery.com>
2291 * regcache.c (struct regcache_descr): Remove outdated comment.
2292 (init_regcache_descr): Remove sizeof_raw_register_valid_p
2294 (regcache_xmalloc): Rename to ...
2295 (regcache_xmalloc_1): ... this. Add `readonly_p' parameter.
2296 Allocate the regcache type accordingly.
2297 (regcache_xmalloc): New as wrapper around regcache_xmalloc_1.
2298 (regcache_xfree): Asser the source is also readonly. Copy sizeof
2299 cooked registers, not raw.
2300 (regcache_dup_no_passthrough): Delete.
2301 (get_thread_arch_regcache): Use regcache_xmalloc_1.
2302 * h8300-tdep.c (h8300_push_dummy_call): Tweak comment to not
2303 mention obsolete write_register_bytes.
2304 * regcache.h (regcache_dup_no_passthrough): Delete declaration.
2306 2011-01-25 Pedro Alves <pedro@codesourcery.com>
2308 Stop remote_read_bytes from handling partial reads itself.
2310 * remote-fileio.c: Include target.h.
2311 (remote_fileio_write_bytes): Delete.
2312 (remote_fileio_func_open, remote_fileio_func_write)
2313 (remote_fileio_func_rename, remote_fileio_func_unlink): Use
2315 (remote_fileio_func_stat): Use target_read_memory and
2316 target_write_memory.
2317 (remote_fileio_func_gettimeofday): Use target_write_memory.
2318 (remote_fileio_func_system): Use target_read_memory.
2319 * remote.c (remote_write_bytes): Make it static.
2320 (remote_read_bytes): Don't handle partial reads here.
2321 * remote.h (remote_read_bytes): Delete declaration.
2323 2011-01-25 Pedro Alves <pedro@codesourcery.com>
2325 Simplify XML parsing a bit.
2327 * xml-support.h (gdb_xml_parse_quick): Declare.
2328 * xml-support.c (gdb_xml_create_parser_and_cleanup_1): Renamed
2329 from gdb_xml_create_parser_and_cleanup, and added `old_chain'
2331 (gdb_xml_create_parser_and_cleanup): Reimplement on top of
2332 gdb_xml_create_parser_and_cleanup_1.
2333 (gdb_xml_parse_quick): New.
2334 * memory-map.c (parse_memory_map): Use gdb_xml_parse_quick.
2335 * osdata.c (osdata_parse): Ditto.
2336 * remote.c (remote_threads_info): Ditto.
2337 * solib-target.c (solib_target_parse_libraries): Ditto.
2338 * xml-syscall.c (syscall_parse_xml): Ditto.
2339 * xml-tdesc.c (tdesc_parse_xml): Ditto.
2341 2011-01-24 Kevin Buettner <kevinb@redhat.com>
2343 * configure.tgt (mips*-*-elf): New; just like mips*-*-*, but
2344 with remote-mips.o added to gdb_target_obs.
2345 * Makefile.in (ALL_TARGET_OBS): Add remote-mips.o.
2347 2011-01-24 Pedro Alves <pedro@codesourcery.com>
2349 * ada-valprint.c (val_print_packed_array_elements): Pass the
2350 correct struct value to val_print.
2351 (ada_val_print_1): Ditto.
2353 2011-01-24 Pedro Alves <pedro@codesourcery.com>
2355 Don't lose embedded_offset in printing routines throughout.
2357 * valprint.h (val_print_array_elements): Change prototype.
2358 * valprint.c (val_print_array_elements): Add `embedded_offset'
2359 parameter, and adjust to pass it down to val_print, while passing
2360 `valaddr' or `address' unmodified. Take embedded_offset into
2361 account when checking repetitions.
2362 * c-valprint.c (c_val_print): Pass embedded_offset to
2363 val_print_array_elements instead of adjusting `valaddr' and
2365 * m2-valprint.c (m2_print_array_contents, m2_val_print): Pass
2366 embedded_offset to val_print_array_elements instead of adjusting
2368 * p-lang.h (pascal_object_print_value_fields): Adjust prototype.
2369 * p-valprint.c (pascal_val_print): Pass embedded_offset to
2370 val_print_array_elements and pascal_object_print_value_fields
2371 instead of adjusting `valaddr'.
2372 (pascal_object_print_value_fields): Add `offset' parameter, and
2374 (pascal_object_print_value): Add `offset' parameter, and adjust to
2376 (pascal_object_print_static_field): Use
2377 value_contents_for_printing/value_embedded_offset, rather than
2379 * ada-valprint.c (val_print_packed_array_elements): Add `offset'
2380 parameter, and adjust to use it. Use
2381 value_contents_for_printing/value_embedded_offset, rather than
2383 (ada_val_print): Rename `valaddr0' parameter to `valaddr'.
2384 (ada_val_print_array): Add `offset' parameter, and adjust to use
2386 (ada_val_print_1): Rename `valaddr0' parameter to `valaddr', and
2387 `embedded_offset' to `offset'. Don't re-adjust `valaddr'.
2388 Instead work with offsets. Use
2389 value_contents_for_printing/value_embedded_offset, rather than
2390 value_contents. Change `defer_val_int' local type to CORE_ADDR,
2391 and use value_from_pointer to extract a target pointer, rather
2392 than value_from_longest.
2393 (print_variant_part): Add `offset' parameter. Replace
2394 `outer_valaddr' parameter by a new `outer_offset' parameter.
2395 Don't re-adjust `valaddr'. Instead pass down adjusted offsets.
2396 (ada_value_print): Use
2397 value_contents_for_printing/value_embedded_offset, rather than
2399 (print_record): Add `offset' parameter, and adjust to pass it
2401 (print_field_values): Add `offset' parameter. Replace
2402 `outer_valaddr' parameter by a new `outer_offset' parameter.
2403 Don't re-adjust `valaddr'. Instead pass down adjusted offsets.
2404 Use value_contents_for_printing/value_embedded_offset, rather than
2406 * d-valprint.c (dynamic_array_type): Use
2407 value_contents_for_printing/value_embedded_offset, rather than
2409 * jv-valprint.c (java_print_value_fields): Add `offset' parameter.
2410 Don't re-adjust `valaddr'. Instead pass down adjusted offsets.
2411 (java_print_value_fields): Take `offset' into account. Don't
2412 re-adjust `valaddr'. Instead pass down adjusted offsets.
2413 (java_val_print): Take `embedded_offset' into account. Pass it to
2414 java_print_value_fields.
2415 * f-valprint.c (f77_print_array_1): Add `embedded_offset'
2416 parameter. Don't re-adjust `valaddr' or `address'. Instead pass
2417 down adjusted offsets.
2418 (f77_print_array): Add `embedded_offset' parameter. Pass it down.
2419 (f_val_print): Take `embedded_offset' into account.
2421 2011-01-21 Joel Brobecker <brobecker@adacore.com>
2423 * inflow.c: Include "gdbcmd.h".
2424 (interactive_mode): New static global, moved here from top.c.
2425 (show_interactive_mode): New function, moved here from top.c.
2426 use gdb_has_a_terminal instead of input_from_terminal_p to
2427 determine the current mode.
2428 (gdb_has_a_terminal): Add handling of the "iteractive-mode"
2430 (_initialize_inflow): Add the "set/show interactive-mode"
2431 commands. Moved here from top.c, after having adjusted slightly
2433 * top.c (interactive_mode, show_interactive_mode): Delete, moved
2435 (input_from_terminal_p): Remove handling of "interactive-mode"
2436 setting, moved to infow.c.
2437 (init_main): Remove creation of the "set/show interactive-mode"
2438 commands, moved to inflow.c.
2440 2011-01-19 Joel Brobecker <brobecker@adacore.com>
2442 * NEWS: Add entry for native ia64-hpux support.
2444 2011-01-19 Tom Tromey <tromey@redhat.com>
2447 * thread.c (free_thread): Free 'name'.
2448 (print_thread_info): Emit thread name. Change CLI output.
2449 (thread_name_command): New function.
2450 (do_captured_thread_select): Emit newline.
2451 (_initialize_thread): Register 'thread name' command.
2452 * target.h (struct target_ops) <to_thread_name>: New field.
2453 (target_thread_name): New macro.
2454 * target.c (update_current_target): Handle to_thread_name.
2455 * python/py-infthread.c (thpy_get_name): New function.
2456 (thpy_set_name): Likewise.
2457 (thread_object_getset): Add "name".
2458 * linux-nat.c (linux_nat_thread_name): New function.
2459 (linux_nat_add_target): Set to_thread_name.
2460 * gdbthread.h (struct thread_info) <name>: New field.
2462 2011-01-18 Joel Brobecker <brobecker@adacore.com>
2464 * ada-valprint.c (ada_print_scalar): Remove unsigned char downcast.
2465 (ada_val_print_1): Likewise.
2467 2011-01-18 Joel Brobecker <brobecker@adacore.com>
2469 * rs6000-tdep.c (rs6000_skip_prologue): Make sure that the prologue
2470 upper limit address is not greater than the function end address
2471 when the upper limit could not be computed using the debugging
2474 2011-01-17 Tom Tromey <tromey@redhat.com>
2476 * cli/cli-cmds.c (apropos_command): Free the compiled regex. Use
2478 * utils.c: Include gdb_regex.h.
2479 (do_regfree_cleanup): New function.
2480 (make_regfree_cleanup): Likewise.
2481 (get_regcomp_error): Likewise.
2482 * gdb_regex.h (make_regfree_cleanup, get_regcomp_error): Declare.
2484 2011-01-17 Tom Tromey <tromey@redhat.com>
2486 * cli/cli-cmds.c (apropos_command): Fix formatting. Don't call
2489 2011-01-17 Pierre Muller <muller@ics.u-strasbg.fr>
2491 * p-exp.y (intvar): New static variable, used to set CURRENT_TYPE
2492 for internal variables.
2493 (last_was_structop): New static variable.
2494 (COMPLETE): New token.
2495 (field_exp): New rule to group all '.' suffix handling.
2496 Add mark_struct_expression calls when approriate to be able
2497 to correctly find fields for completion.
2498 (yylex): Adapt to handle field completion and set INTVAR when
2501 2011-01-14 Yao Qi <yao@codesourcery.com>
2503 * arm-tdep.c (arm_register_reggroup_p): FPS register is in
2504 save_reggroup, restore_reggroup and all_reggroup.
2506 2011-01-14 Joel Brobecker <brobecker@adacore.com>
2508 * ada-valprint. (ada_printchar): Use the correct type length
2509 in call to ada_emit_char.
2510 * c-valprint.c (c_val_print): Remove cast in call to LA_PRINT_CHAR.
2512 2011-01-14 Pierre Muller <muller@ics.u-strasbg.fr>
2514 * solib-som.h (hpux_major_release): Declare variable here.
2515 * solib-som.c: Remove <sys/utsname.h> header.
2516 (DEFAULT_HPUX_MAJOR_RELEASE): New macro.
2517 (hpux_major_release): Make global, change default value to
2518 DEFAULT_HPUX_MAJOR_RELEASE.
2519 (get_hpux_major_release): Simply return HPUX_MAJOR_RELEASE.
2520 * hppa-hpux-nat.c: Add <sys/utsname.h> include.
2521 Add "solib-som.h" header.
2522 (set_hpux_major_release): New function.
2523 (_initialize_hppa_hpux_nat): Call set_hpux_major_release.
2525 2011-01-14 Mike Frysinger <vapier@gentoo.org>
2527 * configure.tgt (*-*-uclinux*): Match more Linux os targets
2529 2011-01-14 Joel Brobecker <brobecker@adacore.com>
2531 * ia64-hpux-nat.c (ia64_hpux_fetch_register): Remove trailing
2532 new-line at end of warning message.
2533 (ia64_hpux_store_register): Remove trailing new-line at end of
2535 * ia64-hpux-tdep.c: Rephrase comment.
2536 * solib-ia64-hpux.c (struct dld_info): Change type of field
2537 dld_flags from "long long" to ULONGEST.
2539 2011-01-14 Pedro Alves <pedro@codesourcery.com>
2541 * target.h (deprecated_child_ops): Delete declaration.
2542 * target.c (deprecated_child_ops): Delete definition.
2544 2011-01-14 Pedro Alves <pedro@codesourcery.com>
2546 * Makefile.in (hpux-thread.o): Delete rule.
2547 * configure.ac: Don't check for HPUX DCE threads support.
2548 * configure, config.in: Regenerate.
2549 * hppa-hpux-nat.c (child_suppress_run): Delete.
2550 (hppa_hpux_child_can_run): Delete.
2551 (_initialize_hppa_hpux_nat): Don't override to_can_run.
2552 * hpux-thread.c: Delete.
2554 2011-01-13 Joel Brobecker <brobecker@adacore.com>
2556 * hpux-thread.c (hpux_pid_to_str): Delete.
2558 2011-01-13 Joel Brobecker <brobecker@adacore.com>
2560 * ada-valprint.c (ada_emit_char): Remove strange code.
2561 Check that c is <= UCHAR_MAX before passing it to isascii.
2562 (char_at): Do not assume that TYPE_LEN is either 1 or 2.
2564 2011-01-13 Joel Brobecker <brobecker@adacore.com>
2566 * top.c (input_from_terminal_p): Restrict the use of interactive_mode
2567 to the case where instream is stdin.
2569 2011-01-13 Joel Brobecker <brobecker@adacore.com>
2571 * ia64-tdep.h (struct regcache): Forward declare.
2572 (struct ia64_infcall_ops): New struct type.
2573 (struct gdbarch_tdep): New fields "find_global_pointer_from_solib"
2575 * ia64-tdep.c (ia64_find_global_pointer_from_dynamic_section):
2576 Renames ia64_find_global_pointer.
2577 (ia64_find_global_pointer, ia64_allocate_new_rse_frame)
2578 (ia64_store_argument_in_slot, ia64_set_function_addr: New function.
2579 (ia64_push_dummy_call): Adjust to use the new tdep ia64_infocall_ops
2581 (ia64_infcall_ops): New static global constant.
2582 (ia64_gdbarch_init): Set tdep->infcall_ops.
2583 * ia64-hpux-nat.c (ia64_hpux_xfer_solib_got): New function.
2584 (ia64_hpux_xfer_partial): Add TARGET_OBJECT_HPUX_SOLIB_GOT handing.
2585 * ia64-hpux-tdep.c: Include "regcache.h", "gdbcore.h" and "inferior.h".
2586 (ia64_hpux_dummy_code): New static global constant.
2587 (ia64_hpux_push_dummy_code, ia64_hpux_allocate_new_rse_frame)
2588 (ia64_hpux_store_argument_in_slot, ia64_hpux_set_function_addr)
2589 (ia64_hpux_dummy_id, ia64_hpux_find_global_pointer_from_solib):
2591 (ia64_hpux_infcall_ops): New static global constant.
2592 (ia64_hpux_init_abi): Install gdbarch and tdep methods needed
2593 for inferior function calls to work properly on ia64-hpux.
2595 2011-01-13 Joel Brobecker <brobecker@adacore.com>
2597 * target.h (enum target_object): Add TARGET_OBJECT_HPUX_UREGS.
2598 * ia64-tdep.h (struct frame_info): forward declaration.
2599 (struct gdbarch_tdep): Add field size_of_register_frame.
2600 * ia64-tdep.c (ia64_access_reg): Use tdep->size_of_register_frame
2601 to determine the size of the register frame.
2602 (ia64_size_of_register_frame): New function.
2603 (ia64_gdbarch_init): Set tdep->size_of_register_frame.
2604 * ia64-hpux-tdep.c: Include "target.h" and "frame.h".
2605 (IA64_HPUX_UREG_REASON): New macro.
2606 (ia64_hpux_stopped_in_syscall, ia64_hpux_size_of_register_frame):
2608 (ia64_hpux_init_abi): Set tdep->size_of_register_frame.
2609 * ia64-hpux-nat.c (ia64_hpux_xfer_uregs): New function.
2610 (ia64_hpux_xfer_partial): Add handling of TARGET_OBJECT_HPUX_UREGS
2613 2011-01-13 Joel Brobecker <brobecker@adacore.com>
2615 Add support for ia64-hpux.
2616 * config/ia64/hpux.mh, ia64-hpux-nat.c, ia64-hpux-tdep.c,
2617 ia64-hpux-tdep.h, solib-ia64-hpux.c, solib-ia64-hpux.h: New files.
2619 * configure.host: Add handling for ia64-hpux hosts. Add associated
2621 * configure.tgt: Add handling for ia64-hpux targets.
2622 * Makefile.in (ALL_64_TARGET_OBS): Add ia64-hpux-tdep.o.
2623 (HFILES_NO_SRCDIR): Add ia64-hpux-tdep.h.
2624 (ALLDEPFILES): Add ia64-hpux-nat.c ia64-hpux-tdep.c.
2626 2011-01-13 Joel Brobecker <brobecker@adacore.com>
2628 [ttrace] Compute thread list immediately after attach.
2629 * inf_ttrace_attach (inf_ttrace_create_threads_after_attach):
2631 (inf_ttrace_attach): Use it.
2633 2011-01-13 Joel Brobecker <brobecker@adacore.com>
2635 * libunwind-frame.c (libunwind_frame_cache): Do not return NULL
2636 if we could not determine the frame's function address. Instead,
2637 use the frame's PC, and then continue.
2639 2011-01-13 Joel Brobecker <brobecker@adacore.com>
2641 * libunwind-frame.c (__LITTLE_ENDIAN, __BIG_ENDIAN): Define if
2642 not already defined.
2644 2011-01-13 Joel Brobecker <brobecker@adacore.com>
2646 * ia64-tdep.c (ia64_struct_type_p): New function.
2647 (ia64_extract_return_value): Handle integral values that are
2648 less than 8 bytes long.
2649 (ia64_push_dummy_call): Likewise.
2651 2011-01-13 Joel Brobecker <brobecker@adacore.com>
2653 * ia64-tdep.c (floatformat_ia64_ext_little): Renames
2654 floatformat_ia64_ext.
2655 (floatformat_ia64_ext_big): New static const.
2656 (floatformats_ia64_ext): Set first entry to &floatformat_ia64_ext_big.
2658 2011-01-12 Tom Tromey <tromey@redhat.com>
2660 * mi/mi-symbol-cmds.c (mi_cmd_symbol_list_lines): Fix error
2662 * mi/mi-main.c (mi_cmd_thread_select): Fix error messages.
2663 (mi_cmd_thread_list_ids): Likewise.
2664 (mi_cmd_data_list_changed_registers): Likewise.
2665 (mi_cmd_data_list_register_values): Likewise.
2666 (mi_cmd_data_write_register_values): Likewise.
2667 (mi_cmd_data_evaluate_expression): Likewise.
2668 (mi_cmd_data_read_memory): Likewise.
2669 (mi_cmd_data_read_memory_bytes): Likewise.
2670 (mi_cmd_data_write_memory): Likewise.
2671 (mi_cmd_enable_timings): Likewise.
2672 * mi/mi-interp.c (mi_cmd_interpreter_exec): Fix error messages.
2673 * mi/mi-cmd-var.c (mi_cmd_var_create): Fix error messages.
2674 (mi_cmd_var_delete): Likewise.
2675 (mi_cmd_var_set_format): Likewise.
2676 (mi_cmd_var_show_format): Likewise.
2677 (mi_cmd_var_info_num_children): Likewise.
2678 (mi_cmd_var_list_children): Likewise.
2679 (mi_cmd_var_info_type): Likewise.
2680 (mi_cmd_var_info_expression): Likewise.
2681 (mi_cmd_var_show_attributes): Likewise.
2682 (mi_cmd_var_assign): Likewise.
2683 (mi_cmd_var_update): Likewise.
2684 (mi_cmd_enable_pretty_printing): Likewise.
2685 (mi_cmd_var_set_update_range): Likewise.
2686 * mi/mi-cmd-target.c (mi_cmd_target_file_get): Fix error
2688 (mi_cmd_target_file_put): Likewise.
2689 (mi_cmd_target_file_delete): Likewise.
2690 * mi/mi-cmd-stack.c (mi_cmd_stack_list_frames): Fix error
2692 (mi_cmd_stack_info_depth): Likewise.
2693 (mi_cmd_stack_list_locals): Likewise.
2694 (mi_cmd_stack_list_args): Likewise.
2695 (mi_cmd_stack_select_frame): Likewise.
2696 (mi_cmd_stack_select_frame): Likewise.
2697 (mi_cmd_stack_info_frame): Likewise.
2698 * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file): Fix error
2700 (mi_cmd_file_list_exec_source_files): Likewise.
2701 * mi/mi-cmd-env.c (mi_cmd_env_pwd): Fix error messages.
2702 (mi_cmd_env_cd): Likewise.
2703 (mi_cmd_env_path): Likewise.
2704 (mi_cmd_env_dir): Likewise.
2705 (mi_cmd_inferior_tty_show): Likewise.
2706 * mi/mi-cmd-disas.c (mi_cmd_disassemble): Fix error messages.
2707 * mi/mi-cmd-break.c (mi_cmd_break_insert): Fix error messages.
2708 (mi_cmd_break_watch): Likewise.
2710 2011-01-12 Thiago Jung Bauermann <bauerman@br.ibm.com>
2712 * ppc-linux-nat.c (booke_cmp_hw_point): Fix whitespace.
2713 (ppc_linux_insert_hw_breakpoint): Likewise.
2714 (ppc_linux_remove_hw_breakpoint): Likewise.
2715 (ppc_linux_insert_watchpoint): Likewise.
2717 2011-01-12 Andrew Burgess <aburgess@broadcom.com>
2718 Jan Kratochvil <jan.kratochvil@redhat.com>
2720 PR fortran/11104 and DWARF unbound arrays detection.
2721 * dwarf2read.c (read_subrange_type): Set zero length on unspecified
2722 upper bound. Set TYPE_HIGH_BOUND_UNDEFINED if not language_ada on
2723 unspecified upper bound.
2724 * eval.c (evaluate_subexp_standard) <multi_f77_subscript>: Remove
2725 variables array_size_array, tmp_type and offset_item. New variable
2726 array. Remove call to f77_get_upperbound. New variables array_type
2727 and index. Call value_subscripted_rvalue for each dimenasion. Remove
2728 the final call to deprecated_set_value_type.
2730 2011-01-12 Jan Kratochvil <jan.kratochvil@redhat.com>
2732 Make value allocations more lazy.
2733 * ada-lang.c (coerce_unspec_val_to_type): Use allocate_value_lazy
2734 instead of allocate_value and set_value_lazy when possible.
2735 * dwarf2loc.c (dwarf2_evaluate_loc_desc_full): Use allocate_value_lazy
2736 instead of allocate_value and set_value_lazy.
2737 * findvar.c (value_of_register_lazy): Likewise.
2738 (read_var_value): Remove V preallocation, call just check_typedef in
2739 advance. Move allocate_value to LOC_CONST, LOC_LABEL,
2740 LOC_CONST_BYTES. Use allocate_value_lazy in LOC_STATIC, LOC_ARG,
2741 LOC_REF_ARG, LOC_LOCAL, LOC_BLOCK. Set ADDR instead of
2742 set_value_address and break in LOC_BLOCK. Use allocate_value_lazy and
2743 remove lval_memory set in LOC_REGPARM_ADDR. Use allocate_value_lazy
2744 in LOC_UNRESOLVED and LOC_OPTIMIZED_OUT. Add setting lval_memory at
2745 the end, remove set_value_lazy there.
2746 * valarith.c (value_subscripted_rvalue): Use allocate_value_lazy
2747 instead of allocate_value and set_value_lazy when possible.
2748 * valops.c (value_fetch_lazy): Do nop for value_optimized_out VAL.
2749 * value.c (allocate_computed_value): Use allocate_value_lazy instead
2750 of allocate_value and set_value_lazy.
2751 (value_from_contents_and_address): Use allocate_value_lazy instead of
2752 allocate_value and set_value_lazy when possible.
2754 2011-01-12 Andrew Burgess <aburgess@broadcom.com>
2756 * disasm.c (dump_insns): Support dumping opcodes for MI.
2757 * mi/mi-cmd-disas.c (mi_cmd_disassemble): Allow mode to control
2758 dumping of instruction opcodes.
2760 2011-01-09 Robert Millan <rmh@gnu.org> (tiny patch)
2762 * configure.tgt: Detect GNU/kFreeBSD and set `gdb_osabi'
2765 2011-01-11 Tom Tromey <tromey@redhat.com>
2767 * thread.c (do_captured_thread_select): Emit newline before
2770 2011-01-11 Michael Snyder <msnyder@vmware.com>
2772 * s390-tdep.c: Comment cleanup, mostly periods and spaces.
2773 * score-tdep.c: Ditto.
2774 * score-tdep.h: Ditto.
2775 * ser-base.c: Ditto.
2776 * ser-go32.c: Ditto.
2779 * ser-mingw.c: Ditto.
2780 * ser-pipe.c: Ditto.
2782 * ser-unix.c: Ditto.
2783 * sh64-tdep.c: Ditto.
2784 * shnbsd-nat.c: Ditto.
2788 * solib-darwin.c: Ditto.
2789 * solib-frv.c: Ditto.
2791 * solib-irix.c: Ditto.
2792 * solib-osf.c: Ditto.
2793 * solib-pa64.c: Ditto.
2794 * solib-som.c: Ditto.
2795 * solib-spu.c: Ditto.
2796 * solib-sunos.c: Ditto.
2797 * solib-svr4.c: Ditto.
2799 * sol-thread.c: Ditto.
2803 * sparc64-linux-tdep.c: Ditto.
2804 * sparc64-tdep.c: Ditto.
2805 * sparc-linux-nat.c: Ditto.
2806 * sparc-linux-tdep.c: Ditto.
2807 * sparc-sol2-nat.c: Ditto.
2808 * sparc-sol2-tdep.c: Ditto.
2809 * sparc-tdep.c: Ditto.
2810 * sparc-tdep.h: Ditto.
2811 * spu-tdep.c: Ditto.
2812 * stabsread.c: Ditto.
2813 * stabsread.h: Ditto.
2821 * target-descriptions.c: Ditto.
2822 * target-descriptions.h: Ditto.
2824 * target-memory.c: Ditto.
2825 * terminal.h: Ditto.
2828 * tracepoint.c: Ditto.
2829 * tracepoint.h: Ditto.
2830 * trad-frame.h: Ditto.
2831 * typeprint.c: Ditto.
2833 2011-01-11 Michael Snyder <msnyder@vmware.com>
2835 * ui-file.c: Comment cleanup, mostly periods and spaces.
2840 * v850-tdep.c: Ditto.
2841 * valarith.c: Ditto.
2843 * valprint.c: Ditto.
2844 * valprint.h: Ditto.
2849 * vax-tdep.c: Ditto.
2853 * windows-nat.c: Ditto.
2854 * windows-tdep.c: Ditto.
2855 * xcoffread.c: Ditto.
2856 * xcoffsolib.c: Ditto.
2857 * xml-support.c: Ditto.
2858 * xstormy16-tdep.c: Ditto.
2859 * xtensa-tdep.c: Ditto.
2860 * xtensa-tdep.h: Ditto.
2862 2011-01-11 Thiago Jung Bauermann <bauerman@br.ibm.com>
2864 * breakpoint.c (resources_needed_watchpoint): Fix indentation.
2865 * gdbtypes.c (is_scalar_type_recursive): Fix formatting.
2867 2011-01-11 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
2868 Thiago Jung Bauermann <bauerman@br.ibm.com>
2870 Implement support for PowerPC BookE ranged watchpoints.
2872 (struct breakpoint_ops) <resources_needed>: New method.
2873 Initialize to NULL in all existing breakpoint_ops instances.
2874 (struct breakpoint) <exact>: New field.
2875 (target_exact_watchpoints): Declare external global.
2876 * breakpoint.c (target_exact_watchpoints): New global flag.
2877 (update_watchpoint): Set b->type to bp_hardware_watchpoint and
2878 b->enable_state to bp_enabled before calling
2879 hw_watchpoint_used_count.
2880 (hw_watchpoint_used_count): Iterate over all bp_locations in a
2881 watchpoint. Call breakpoint's breakpoint_ops.resources_needed
2883 (insert_watchpoint, remove_watchpoint): Use fixed length of 1 byte
2884 if the watchpoint is exact.
2885 (resources_needed_watchpoint): New function.
2886 (watchpoint_breakpoint_ops): Add resources_needed_watchpoint.
2887 (watch_command_1): Set b->exact if the user asked for an exact
2888 watchpoint and one can be set.
2889 (can_use_hardware_watchpoint): Add exact_watchpoints argument.
2890 Pass fixed length of 1 to target_region_ok_for_hw_watchpoint if
2891 the user asks for an exact watchpoint and one can be set. Return
2892 number of needed debug registers to watch the expression.
2893 * gdbtypes.c (is_scalar_type): New function, based on
2894 valprint.c:scalar_type_p.
2895 (is_scalar_type_recursive): New function.
2896 * gdbtypes.h (is_scalar_type_recursive): Declare.
2897 * ppc-linux-nat.c (ppc_linux_region_ok_for_hw_watchpoint): Always
2898 handle regions when ranged watchpoints are available.
2899 (create_watchpoint_request): New function.
2900 (ppc_linux_insert_watchpoint, ppc_linux_remove_watchpoint): Use
2901 create_watchpoint_request.
2902 * rs6000-tdep.c (show_powerpc_exact_watchpoints): New function.
2903 (_initialize_rs6000_tdep): Add `exact-watchpoints' boolean to the
2904 `set powerpc' and `show powerpc' commands.
2905 * target.h (struct target_ops) <to_region_ok_for_hw_watchpoint>:
2906 Mention documentation comment in the target macro.
2907 (target_region_ok_for_hw_watchpoint): Document return value.
2909 2011-01-11 Thiago Jung Bauermann <bauerman@br.ibm.com>
2911 * breakpoint.c (update_watchpoint): Decide on using a software or
2912 hardware watchpoint after the bp_locations are created.
2914 2010-01-11 Thiago Jung Bauermann <bauerman@br.ibm.com>
2916 Convert hardware watchpoints to use breakpoint_ops.
2917 * breakpoint.h (breakpoint_ops) <insert>: Rename to...
2918 <insert_location>: ... this. Return int instead of void.
2919 Accept pointer to struct bp_location instead of pointer to
2920 struct breakpoint. Adapt all implementations.
2921 (breakpoint_ops) <remove>: Rename to...
2922 <remove_location>: ... this. Accept pointer to struct bp_location
2923 instead of pointer to struct breakpoint. Adapt all implementations.
2924 * breakpoint.c (insert_catchpoint): Delete function.
2925 (insert_bp_location): Call the watchpoint or catchpoint's
2926 breakpoint_ops.insert method.
2927 (remove_breakpoint_1): Call the watchpoint or catchpoint's
2928 breakpoint_ops.remove method.
2929 (insert_watchpoint, remove_watchpoint): New functions.
2930 (watchpoint_breakpoint_ops): New structure.
2931 (watch_command_1): Initialize the OPS field.
2932 * inf-child.c (inf_child_insert_fork_catchpoint)
2933 (inf_child_remove_fork_catchpoint, inf_child_insert_vfork_catchpoint)
2934 (inf_child_remove_vfork_catchpoint, inf_child_insert_exec_catchpoint)
2935 (inf_child_remove_exec_catchpoint, inf_child_set_syscall_catchpoint):
2937 (inf_child_target): Remove initialization of to_insert_fork_catchpoint,
2938 to_remove_fork_catchpoint, to_insert_vfork_catchpoint,
2939 to_remove_vfork_catchpoint, to_insert_exec_catchpoint,
2940 to_remove_exec_catchpoint and to_set_syscall_catchpoint.
2941 * target.c (update_current_target): Change default implementation of
2942 to_insert_fork_catchpoint, to_remove_fork_catchpoint,
2943 to_insert_vfork_catchpoint, to_remove_vfork_catchpoint,
2944 to_insert_exec_catchpoint, to_remove_exec_catchpoint and
2945 to_set_syscall_catchpoint to return_one.
2946 (debug_to_insert_fork_catchpoint, debug_to_insert_vfork_catchpoint)
2947 (debug_to_insert_exec_catchpoint): Report return value.
2948 * target.h (to_insert_fork_catchpoint, to_insert_vfork_catchpoint)
2949 (to_insert_exec_catchpoint): Change declaration to return int instead
2952 2011-01-11 Michael Snyder <msnyder@vmware.com>
2954 * arm-tdep.c: Internationalization.
2957 * fork-child.c: Ditto.
2958 * nto-procfs.c: Ditto.
2959 * ppc-sysv-tdep.c: Ditto.
2961 * remote-mips.c: Ditto.
2963 * rs6000-nat.c: Ditto.
2964 * rs6000-tdep.c: Ditto.
2968 * xml-support.c: Ditto.
2969 * mi/mi-cmd-break.c: Ditto.
2970 * mi/mi-cmd-var.c: Ditto.
2971 * mi/mi-interp.c: Ditto.
2972 * mi/mi-main.c: Ditto.
2974 2011-01-11 Andrew Burgess <aburgess@broadcom.com>
2976 * remote-sim.c (gdbsim_store_register): Update API to
2977 sim_store_register to check more error conditions.
2979 2011-01-10 Michael Snyder <msnyder@vmware.com>
2981 * nto-procfs.c: Comment cleanup, mostly periods and spaces.
2982 * nto-tdep.c: Ditto.
2983 * nto-tdep.h: Ditto.
2984 * objc-exp.y: Ditto.
2985 * objc-lang.c: Ditto.
2986 * objfiles.c: Ditto.
2987 * objfiles.h: Ditto.
2988 * observer.c: Ditto.
2989 * opencl-lang.c: Ditto.
2992 * parser-defs.h: Ditto.
2995 * posix-hdep.c: Ditto.
2996 * ppcbug-rom.c: Ditto.
2997 * ppc-linux-nat.c: Ditto.
2998 * ppc-linux-tdep.c: Ditto.
2999 * ppc-linux-tdep.h: Ditto.
3000 * ppcnbsd-tdep.c: Ditto.
3001 * ppcobsd-tdep.c: Ditto.
3002 * ppcobsd-tdep.h: Ditto.
3003 * ppc-sysv-tdep.c: Ditto.
3004 * ppc-tdep.h: Ditto.
3005 * printcmd.c: Ditto.
3006 * proc-abi.c: Ditto.
3007 * proc-flags.c: Ditto.
3009 * proc-utils.h: Ditto.
3010 * progspace.h: Ditto.
3011 * prologue-value.c: Ditto.
3012 * prologue-value.h: Ditto.
3013 * psympriv.h: Ditto.
3015 * p-typeprint.c: Ditto.
3016 * p-valprint.c: Ditto.
3017 * ravenscar-sparc-thread.c: Ditto.
3018 * ravenscar-thread.c: Ditto.
3019 * ravenscar-thread.h: Ditto.
3021 * regcache.c: Ditto.
3022 * regcache.h: Ditto.
3024 * remote-fileio.c: Ditto.
3025 * remote-fileio.h: Ditto.
3027 * remote-m32r-sdi.c: Ditto.
3028 * remote-mips.c: Ditto.
3029 * remote-sim.c: Ditto.
3030 * rs6000-aix-tdep.c: Ditto.
3031 * rs6000-nat.c: Ditto.
3032 * rs6000-tdep.c: Ditto.
3034 2011-01-10 Michael Snyder <msnyder@vmware.com>
3036 * charset.c (validate): Internationalization.
3037 * coffread.c (read_one_sym): Ditto.
3038 * dwarf2read.c (dwarf2_attach_fields_to_type): Ditto.
3039 * h8300-tdep.c (H8300_extract_return_value): Ditto.
3040 * inflow.c (new_tty): Ditto.
3041 * iq2000-tdep.c (iq2000_breakpoint_from_pc): Ditto.
3042 * m32c-tdep.c (m32c_return_value): Ditto.
3043 * mep-tdep.c (mep_store_return_value): Ditto.
3044 * score-tdep.c (score7_fetch_insn): Ditto.
3045 * ser-mingw.c (pipe_windows_open): Ditto.
3046 * sh64-tdep.c (sh64_extract_return_value): Ditto.
3047 * spu-tdep.c (spu_register_type): Ditto.
3048 * tracepoint.c (trace_find_command): Ditto.
3049 * valarith.c (value_pos): Ditto.
3051 2011-01-10 Joel Brobecker <brobecker@adacore.com>
3053 * ada-valprint.c (printstr): Minor comment reformatting.
3055 2011-01-08 Michael Snyder <msnyder@vmware.com>
3057 * m32r-rom.c (m32r_upload_command): Fix up ARI warnings for _
3060 2011-01-08 Michael Snyder <msnyder@vmware.com>
3062 * h8300-tdep.c: Comment cleanup, mostly periods and spaces.
3063 * hppa-hpux-tdep.c: Ditto.
3064 * hppa-linux-nat.c: Ditto.
3065 * hppa-linux-tdep.c: Ditto.
3066 * hppanbsd-tdep.c: Ditto.
3067 * hppa-tdep.c: Ditto.
3068 * hppa-tdep.h: Ditto.
3069 * hpux-thread.c: Ditto.
3070 * i386-cygwin-tdep.c: Ditto.
3071 * i386-darwin-nat.c: Ditto.
3072 * i386gnu-nat.c: Ditto.
3073 * i386-linux-nat.c: Ditto.
3074 * i386-linux-tdep.c: Ditto.
3075 * i386-nat.c: Ditto.
3076 * i386-nat.h: Ditto.
3077 * i386nbsd-tdep.c: Ditto.
3078 * i386-sol2-nat.c: Ditto.
3079 * i386-stub.c: Ditto.
3080 * i386-tdep.c: Ditto.
3081 * i386-tdep.h: Ditto.
3082 * i387-tdep.c: Ditto.
3083 * ia64-linux-nat.c: Ditto.
3084 * ia64-linux-tdep.c: Ditto.
3085 * ia64-tdep.c: Ditto.
3089 * inferior.c: Ditto.
3090 * inferior.h: Ditto.
3096 * iq2000-tdep.c: Ditto.
3097 * irix5-nat.c: Ditto.
3103 * jv-typeprint.c: Ditto.
3104 * jv-valprint.c: Ditto.
3105 * language.c: Ditto.
3106 * language.h: Ditto.
3107 * linespec.c: Ditto.
3108 * linux-fork.c: Ditto.
3109 * linux-nat.c: Ditto.
3110 * linux-thread-db.c: Ditto.
3111 * lm32-tdep.c: Ditto.
3113 2011-01-08 Michael Snyder <msnyder@vmware.com>
3115 * m2-exp.y: Comment cleanup, mostly periods and spaces.
3117 * m2-typeprint.c: Ditto.
3118 * m2-valprint.c: Ditto.
3119 * m32c-tdep.c: Ditto.
3120 * m32r-linux-nat.c: Ditto.
3121 * m32r-rom.c: Ditto.
3122 * m32r-tdep.c: Ditto.
3123 * m32r-tdep.h: Ditto.
3124 * m68hc11-tdep.c: Ditto.
3125 * m58klinux-nat.c: Ditto.
3126 * m68k-tdep.c: Ditto.
3127 * m88k-tdep.c: Ditto.
3128 * m88k-tdep.h: Ditto.
3129 * machoread.c: Ditto.
3130 * macrocmd.c: Ditto.
3131 * macroexp.c: Ditto.
3132 * macrotab.c: Ditto.
3135 * mdebugread.c: Ditto.
3136 * mdebugread.h: Ditto.
3139 * memory-map.h: Ditto.
3140 * mep-tdep.c: Ditto.
3141 * microblaze-rom.c: Ditto.
3142 * microblaze-tdep.c: Ditto.
3144 * mips-irix-tdep.c: Ditto.
3145 * mips-linux-nat.c: Ditto.
3146 * mips-linux-tdep.c: Ditto.
3147 * mips-linux-tdep.h: Ditto.
3148 * mipsnbsd-nat.c: Ditto.
3149 * mipsnbsd-tdep.c: Ditto.
3150 * mipsread.c: Ditto.
3151 * mips-tdep.c: Ditto.
3152 * mips-tdep.h: Ditto.
3153 * mn10300-linux-tdep.c: Ditto.
3154 * mn10300-tdep.c: Ditto.
3155 * mn10300-tdep.h: Ditto.
3158 * moxie-tdep.c: Ditto.
3159 * moxie-tdep.h: Ditto.
3162 2011-01-08 Mike Frysinger <vapier@gentoo.org>
3164 * bfin-tdep.h (BFIN_A0_DOT_W_REGNUM): Fix typo in name.
3166 2011-01-08 Robert Millan <rmh@gnu.org>
3168 * fbsd-nat.c (fbsd_find_memory_regions): Fix typo.
3170 2011-01-07 Michael Snyder <msnyder@vmware.com>
3172 * charset.c (_initialize_charset): Fix typo in string.
3174 2011-01-07 Michael Snyder <msnyder@vmware.com>
3176 * mi/mi-cmd-disas.c (mi_cmd_disassemble): Mark up error message
3178 * tui/tui-layout.c (tui_set_layout_for_display_command):
3179 Split line so that operator goes to beginning of line.
3180 * tui/tui-winsource.c (tui_horizontal_source_scroll): Move
3181 assignment out of if statement.
3183 2011-01-07 Michael Snyder <msnyder@vmware.com>
3185 * ada-lang.c: Comment cleanup, mostly periods and spaces.
3186 * ada-lang.h: Ditto.
3187 * ada-tasks.c: Ditto.
3188 * ada-valprint.c: Ditto.
3189 * aix-threads.c: Ditto.
3190 * alpha-linux-nat.c: Ditto.
3191 * alpha-linux-tdep.c: Ditto.
3192 * alpha-mdebug-tdep.c: Ditto.
3193 * alpha-nat.c: Ditto.
3194 * alpha-osf1-tdep.c: Ditto.
3195 * alpha-tdep.c: Ditto.
3196 * alphabsd-nat.c: Ditto.
3197 * alphabsd-tdep.c: Ditto.
3198 * amd64-darwin-tdep.c: Ditto.
3199 * amd64-linux-nat.c: Ditto.
3200 * amd64-linux-tdep.c: Ditto.
3201 * amd64-sol2-tdep.c: Ditto.
3202 * amd64-tdep.c: Ditto.
3203 * amd64-fbsd-tdep.c: Ditto.
3204 * amd64-nbsd-tdep.c: Ditto.
3205 * amd64-obsd-tdep.c: Ditto.
3206 * amd64-linux-nat.c: Ditto.
3207 * amd64-linux-tdep.c: Ditto.
3208 * arm-tdep.c: Ditto.
3209 * arm-tdep.h: Ditto.
3210 * armnbsd-nat.c: Ditto.
3211 * avr-tdep.c: Ditto.
3212 * bfin-tdep.c: Ditto.
3214 * c-typeprintc: Ditto.
3215 * c-valprint.c: Ditto.
3216 * coff-pe-read.h: Ditto.
3217 * coffreead.c: Ditto.
3218 * cris-tdep.c: Ditto.
3220 * darwin-nat-info.c: Ditto.
3221 * darwin-nat.c: Ditto.
3222 * dbug-rom.c: Ditto.
3226 * dec-thread.c: Ditto.
3228 * demangle.c: Ditto.
3229 * dicos-tdep.c: Ditto.
3230 * dictionary.c: Ditto.
3231 * dictionary.h: Ditto.
3232 * dink32-rom.c: Ditto.
3234 * doublest.c: Ditto.
3236 * dummy-frame.c: Ditto.
3237 * dwarf2-frame.c: Ditto.
3238 * dwarf2expr.c: Ditto.
3239 * dwarf2loc.c: Ditto.
3240 * dwarf2read.c: Ditto.
3244 * event-top.h: Ditto.
3245 * exceptions.c: Ditto.
3246 * exceptions.h: Ditto.
3248 * expprint.c: Ditto.
3249 * expression.h: Ditto.
3253 * f-typeprint.c: Ditto.
3254 * f-valprint.c: Ditto.
3255 * fbsd-nat.c: Ditto.
3257 * fork-child.c: Ditto.
3260 * frv-linux-tdep.c: Ditto.
3261 * frv-tdep.c: Ditto.
3263 * gdb-stabs.h: Ditto.
3264 * gdb_assert.h: Ditto.
3265 * gdb_string.h: Ditto.
3266 * gdb_thread_db.h: Ditto.
3267 * gdb_wait.h: Ditto.
3268 * gdbarch.sh: Ditto.
3270 * gdbthread.h: Ditto.
3271 * gdbtypes.c: Ditto.
3272 * gdbtypes.h: Ditto.
3275 * gnu-v2-abi.c: Ditto.
3276 * gnu-v3-abi.c: Ditto.
3277 * go32-nat.c: Ditto.
3278 * gdbarch.c: Regenerate.
3279 * gdbarch.h: Regenerate.
3281 2011-01-07 Michael Snyder <msnyder@vmware.com>
3283 * ax-gdb.c: Adjust some long output strings.
3284 * breakpoint.c: Ditto.
3289 * linux-nat.c: Ditto.
3290 * solib-pa64.c: Ditto.
3291 * solib-som.c: Ditto.
3293 2011-01-06 Tom Tromey <tromey@redhat.com>
3297 * python/python.c (GdbMethods): Add "newest_frame" method.
3298 * python/python-internal.h (gdbpy_newest_frame): Declare.
3299 * python/py-frame.c (gdbpy_newest_frame): New function.
3301 2010-01-06 Paul Pluzhnikov <ppluzhnikov@google.com>
3303 * jit.h (struct jit_code_entry): use ULONGEST for symfile_size.
3304 * jit.c (jit_debug): New variable.
3305 (show_jit_debug): New function.
3306 (struct target_buffer): Use ULONGEST.
3307 (bfd_open_from_target_memory): Likewise.
3308 (jit_register_code, jit_inferior_init): Add debug output.
3309 (_initialize_jit): Register "debug jit" command.
3311 2011-01-06 Tom Tromey <tromey@redhat.com>
3313 * frame.h (enum frame_type) <INLINE_FRAME>: Fix comment.
3314 * python/py-frame.c (gdbpy_initialize_frames): Add INLINE_FRAME
3317 2011-01-06 Tom Tromey <tromey@redhat.com>
3319 * python/py-frame.c (frapy_block): Use get_frame_block.
3321 2011-01-06 Joel Brobecker <brobecker@adacore.com>
3323 Do not stop on SIGPRIO signals by default
3324 * infrun.c (_initialize_infrun): Unset signal_stop and
3325 signal_print for TARGET_SIGNAL_PRIO.
3327 2011-01-06 Joel Brobecker <brobecker@adacore.com>
3329 * ada-tasks.c: Fix style violation in comment.
3331 2011-01-06 Joel Brobecker <brobecker@adacore.com>
3333 * linespec.c (decode_compound, find_method): Remove trailing \n
3334 at end of error string.
3335 * solib-irix.c (irix_current_sos): Likewise.
3336 * varobj.c (uninstall_variable): Likewise.
3338 2011-01-06 Joel Brobecker <brobecker@adacore.com>
3340 * copyright.py: New script.
3341 * copyright.sh (byhand): Add *.ads, *.adb, *.gpr and *.inc.
3342 Launch emacs without exec'ing. Call copyright.py afterwards.
3344 2011-01-05 Michael Snyder <msnyder@vmware.com>
3346 * addrmap.c: Shorten lines of >= 80 columns.
3347 * arch-utils.c: Ditto.
3348 * arch-utils.h: Ditto.
3350 * ax-general.c: Ditto.
3352 * blockframe.c: Ditto.
3353 * breakpoint.c: Ditto.
3354 * buildsym.c: Ditto.
3356 * c-typeprint.c: Ditto.
3358 * coffread.c: Ditto.
3362 * cp-namespace.c: Ditto.
3363 * cp-support.c: Ditto.
3364 * dbug-rom.c: Ditto.
3369 * dictionary.c: Ditto.
3371 * doublest.c: Ditto.
3372 * dwarf2-frame.c: Ditto.
3373 * dwarf2expr.c: Ditto.
3374 * dwarf2loc.c: Ditto.
3375 * dwarf2read.c: Ditto.
3378 * event-loop.c: Ditto.
3379 * event-loop.h: Ditto.
3380 * exceptions.h: Ditto.
3382 * expprint.c: Ditto.
3383 * expression.h: Ditto.
3385 * f-valprint.c: Ditto.
3387 * frame-base.c: Ditto.
3388 * frame-unwind.c: Ditto.
3389 * frame-unwind.h: Ditto.
3393 * gdb-stabs.h: Ditto.
3394 * gdb_assert.h: Ditto.
3395 * gdb_dirent.h: Ditto.
3396 * gdb_obstack.h: Ditto.
3398 * gdbtypes.c: Ditto.
3399 * gdbtypes.h: Ditto.
3400 * inf-ttrace.c: Ditto.
3405 * inline-frame.h: Ditto.
3406 * language.c: Ditto.
3407 * language.h: Ditto.
3408 * libunwind-frame.c: Ditto.
3409 * libunwind-frame.h: Ditto.
3410 * linespec.c: Ditto.
3411 * linux-nat.c: Ditto.
3412 * linux-nat.h: Ditto.
3413 * linux-thread-db.c: Ditto.
3414 * machoread.c: Ditto.
3415 * macroexp.c: Ditto.
3416 * macrotab.c: Ditto.
3419 * mdebugread.c: Ditto.
3424 * objfiles.c: Ditto.
3425 * objfiles.h: Ditto.
3427 * p-typeprint.c: Ditto.
3428 * p-valprint.c: Ditto.
3430 * printcmd.c: Ditto.
3431 * proc-events.c: Ditto.
3433 * progspace.c: Ditto.
3434 * progspace.h: Ditto.
3435 * psympriv.h: Ditto.
3438 * regcache.c: Ditto.
3439 * regcache.h: Ditto.
3440 * remote-fileio.c: Ditto.
3442 * ser-mingw.c: Ditto.
3444 * ser-unix.c: Ditto.
3447 * solib-frv.c: Ditto.
3448 * solib-irix.c: Ditto.
3449 * solib-osf.c: Ditto.
3450 * solib-pa64.c: Ditto.
3451 * solib-som.c: Ditto.
3452 * solib-sunos.c: Ditto.
3453 * solib-svr4.c: Ditto.
3454 * solib-target.c: Ditto.
3458 * stabsread.c: Ditto.
3459 * stabsread.c: Ditto.
3462 * symfile-mem.c: Ditto.
3468 * target-descriptions.c: Ditto.
3469 * target-memory.c: Ditto.
3472 * terminal.h: Ditto.
3475 * tracepoint.c: Ditto.
3476 * tracepoint.h: Ditto.
3480 * user-regs.c: Ditto.
3481 * user-regs.h: Ditto.
3483 * valarith.c: Ditto.
3485 * valprint.c: Ditto.
3486 * valprint.h: Ditto.
3491 * xcoffread.c: Ditto.
3492 * xcoffsolib.c: Ditto.
3493 * xcoffsolib.h: Ditto.
3494 * xml-syscall.c: Ditto.
3495 * xml-tdesc.c: Ditto.
3497 2011-01-05 Michael Snyder <msnyder@vmware.com>
3499 * cli/cli-cmds.c: Shorten lines of >= 80 columns.
3500 * cli/cli-decode.c: Ditto.
3501 * cli/cli-dump.c: Ditto.
3502 * cli/cli-logging.c: Ditto.
3503 * cli/cli-script.c: Ditto.
3504 * cli/cli-setshow.c: Ditto.
3505 * common/signals.c: Ditto.
3506 * mi/mi-cmd-break.c: Ditto.
3507 * mi/mi-cmd-disas.c: Ditto.
3508 * mi/mi-cmd-stack.c: Ditto.
3509 * mi/mi-cmd-var.c: Ditto.
3510 * mi/mi-cmds.c: Ditto.
3511 * mi/mi-common.h: Ditto.
3512 * mi/mi-console.c: Ditto.
3513 * mi/mi-interp.c: Ditto.
3514 * mi/mi-main.c: Ditto.
3515 * osf-share/cma_attr.c: Ditto.
3516 * osf-share/cma_deb_core.h: Ditto.
3517 * osf-share/cma_debug_client.h: Ditto.
3518 * osf-share/cma_handle.h: Ditto.
3519 * osf-share/cma_mutex.h: Ditto.
3520 * osf-share/cma_stack_int.h: Ditto.
3521 * osf-share/cma_tcb_defs.h: Ditto.
3522 * python/py-auto-load.c: Ditto.
3523 * python/py-breakpoint.c: Ditto.
3524 * python/py-cmd.c: Ditto.
3525 * python/py-frame.c: Ditto.
3526 * python/py-objfile.c: Ditto.
3527 * python/py-param.c: Ditto.
3528 * python/py-progspace.c: Ditto.
3529 * python/py-symbol.c: Ditto.
3530 * python/py-value.c: Ditto.
3531 * python/python-internal.h: Ditto.
3532 * python/python.c: Ditto.
3533 * tui/tui-data.c: Ditto.
3534 * tui/tui-disasm.c: Ditto.
3535 * tui/tui-hooks.c: Ditto.
3536 * tui/tui-io.c: Ditto.
3537 * tui/tui-layout.c: Ditto.
3538 * tui/tui-regs.c: Ditto.
3539 * tui/tui-source.c: Ditto.
3540 * tui/tui-stack.c: Ditto.
3541 * tui/tui-win.c: Ditto.
3542 * tui/tui-windata.c: Ditto.
3543 * tui/tui-winsource.c: Ditto.
3545 2011-01-05 Joel Brobecker <brobecker@adacore.com>
3547 * configure.ac, gdb.1: Copyright year update.
3549 2011-01-03 Jan Kratochvil <jan.kratochvil@redhat.com>
3551 * frame.c (get_prev_frame_1) <UNWIND_INNER_ID>: New variables
3552 this_pc_in_block, morestack_msym and morestack_name. Check for
3553 "__morestack" minimal symbol there.
3555 2011-01-03 Joel Brobecker <brobecker@adacore.com>
3557 * symfile.c (find_sym_fns): Add call to dont_repeat.
3559 2011-01-01 Joel Brobecker <brobecker@adacore.com>
3561 Copyright year update in most files (performed by copyright.sh).
3563 2011-01-01 Joel Brobecker <brobecker@adacore.com>
3565 * top.c (print_gdb_version): Update copyright year in version output.
3567 For older changes see ChangeLog-2010.
3573 version-control: never