1 Sun Feb 12 10:02:16 1995 Per Bothner <bothner@cygnus.com>
3 * buildsym.c (finish_block): If finishing a function without known
4 parameter type info, set that from parameter symbols.
5 * c-typeprint.c (c_type_print_varspec_suffix): For TYPE_CODE_FUNC,
6 print parameter types, if available.
7 * ch-typeprint.c (chill_type_print_base): Likewise.
9 * gdbtypes.h (struct type): Remove function type field.
10 (TYPE_FUNCTION_TYPE): Remove macro. We can't as simply re-use
11 function types now that we're also storing parameter types.
12 And the payoff is much less.
13 * gdbtypes.c (make_function_type): Don't use/set TYPE_FUNCTION_TYPE.
14 (recursive_dump_type): Don't print TYPE_FUNCTION_TYPE.
15 * dwarfread.c (read_subroutine_type): Don't set TYPE_FUNCTION_TYPE.
17 Sun Feb 12 09:03:47 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
19 * buildsym.c (start_subfile): Set language for f2c like for cfront.
21 Thu Feb 9 20:20:11 1995 Rob Savoye <rob@darkstar.cygnus.com>
23 * op50n-rom.c: Add the control registers.
25 Thu Feb 9 15:46:39 1995 Stan Shebs <shebs@andros.cygnus.com>
27 * Makefile.in (CLIBS): Add $(LIBIBERTY) before, in addition to
28 after, any host/target/native libraries.
29 * dcache.c (insque, remque): Remove declarations.
30 * gdbtypes.h (type_code): Remove trailing comma.
33 * xcoffread.c (read_xcoff_symtab) [C_HIDEXT]: Move #ifdef
34 STATIC_NODEBUG_VARS inside case.
36 Thu Feb 9 07:43:41 1995 Jim Kingdon <kingdon@deneb.cygnus.com>
38 * config/sparc/tm-sun4sol2.h: Define STATIC_TRANSFORM_NAME.
39 * partial-stab.h: Call it.
40 * stabsread.c (define_symbol) [STATIC_TRANSFORM_NAME]: Call
41 STATIC_TRANSFORM_NAME to get the name and use minimal symbols to
43 * sparc-tdep.c (solaris_static_transform_name): New function.
45 Thu Feb 9 12:09:09 1995 Jeff Law (law@snake.cs.utah.edu)
47 * somread.c (som_symtab_read): Handle dynamic relocation for both
48 text and data symbols.
49 (som_symfile_offsets): If objfile is a shared library, then get
50 text and data offsets from the shared library structures.
51 * somsolib.c (som_solib_add): Copy the bfd pointer from the
52 objfile rather than reopening the file again.
53 (som_solib_section_offsets): New function.
54 * somsolib.h (som_solib_section_offsets): Declare.
56 Wed Feb 8 20:32:18 1995 Jim Kingdon <kingdon@deneb.cygnus.com>
58 * config/sparc/tm-sun4sol2.h, dbxread.c: Rename
59 N_SO_ADDRESS_MAYBE_MISSING to SOFUN_ADDRESS_MAYBE_MISSING.
60 * symtab.h (minimal_symbol) [SOFUN_ADDRESS_MAYBE_MISSING]: Add
62 * elfread.c (record_minimal_symbol_and_info),
63 minsyms.c, symtab.h (prim_record_minimal_symbol_and_info): Return
65 * elfread.c (elf_symtab_read) [SOFUN_ADDRESS_MAYBE_MISSING]:
66 Set filename field of minimal symbol.
67 * symmisc.c (dump_msymbols) [SOFUN_ADDRESS_MAYBE_MISSING]:
69 * minsyms.c, symtab.h (lookup_minimal_symbol): New arg sfile.
70 * symm-tdep.c, somsolib.c, hppa-tdep.c, c-exp.y, f-exp.y,
71 m2-exp.y, nindy-tdep.c, m3-nat.c, irix5-nat.c, hpread.c,
72 os9kread.c, breakpoint.c, alpha-tdep.c, valops.c, symtab.c,
73 printcmd.c, dbxread.c: Change callers to pass NULL for sfile.
74 * dbxread.c (process_one_symbol) [SOFUN_ADDRESS_MAYBE_MISSING]:
75 Find address of function from minimal symbols.
76 * partial-stab.h, case 'f', 'F': Call find_stab_function_addr
77 instead of getting pst->textlow from the stab.
78 * minsyms.c (find_stab_function_addr): New function.
80 Wed Feb 8 19:19:56 1995 Rob Savoye <rob@darkstar.cygnus.com>
82 * monitor.c: Fix so all the output shows up in the GUI command
85 Mon Feb 6 18:50:59 1995 Stan Shebs <shebs@andros.cygnus.com>
87 * i386-tdep.c (_initialize_i386_tdep): Put void decl on separate
88 line, so init.c generation works correctly.
90 * arc-tdep.c (_initialize_arc_tdep): Ditto.
93 Mon Feb 6 14:44:36 1995 Rob Savoye <rob@darkstar.cygnus.com>
95 * config/mips/idt.mt: Add support for the lsi33k target.
96 * config/sparc/sun4sol2.mh: Add support for ser-tcp.
97 * array-rom.c: Finish the rest of the support commands needed by
99 * mips-tdep.c: Add LSI33k register names and processor type.
102 Sun Feb 5 20:32:44 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
104 * gdbtk.c (gdb_disassemble): Deference pointer to function before
105 calling it (pre-ANSI compilers generally require this).
108 Sat Feb 4 13:29:52 1995 Stan Shebs <shebs@andros.cygnus.com>
110 * config/m68k/est.mt (TDEPFILES): Remove m68k-pinsn.o.
112 Fri Feb 3 16:47:31 1995 Kung Hsu <kung@mexican.cygnus.com>
114 * ser-go32-para.c (dos_read): fix syntax errors.
116 Fri Feb 3 11:19:20 1995 Stu Grossman (grossman@cygnus.com)
118 * core.c (dis_asm_read_memory), defs.h, top.c: Get rid of
119 dis_asm_read_memory_hook. We can now call the disassemblers
120 directly and have no need for this hook anymore.
122 * gdbtk.c (gdb_disassemble): Ditto.
124 * defs.h, printcmd.c: Make print_insn be static.
126 * ser-go32.c (dos_comisr): Make this 8 bit clean.
127 * (dos_open dos_close): Allow multiple opens to the same device.
128 Use a ref count to prevent unwanted deallocations.
129 * sparcl-tdep.c: Put #ifdefs around all socket stuff to make GO32
131 * (sparclite_ops): Switch to download_stratum.
132 * target.h (enum strata): Move download_stratum before
133 process_stratum so that executable targets get pushed on top of
136 Thu Feb 2 19:02:45 1995 Rob Savoye <rob@darkstar.cygnus.com>
138 * array-rom.c: Remove the non GDB remote protocol config stuff.
140 * monitor.c: All reading/writing functions for memory and
143 Thu Feb 2 16:11:04 1995 Kung Hsu <kung@mexican.cygnus.com>
146 * config/arc/arc.mt: new target makefile for arc processor.
147 * config/arc/tm-arc.h: new target header for arc processor.
148 * config/arc/go32.mh: new go32 host makefile for arc processor.
149 * config/arc/xm-go32.h: new go32 host header for arc processor.
150 * arc-tdep.c: new target dependent codes for arc processor.
151 * remote-arc.c: new file for arc-specific protocol through
154 * ser-go32-para.c: new file for go32 parallel port communication.
156 Thu Feb 2 13:58:40 1995 Stan Shebs <shebs@andros.cygnus.com>
158 * Makefile.in (VERSION): Bump to 4.13.2.
160 Thu Feb 2 07:27:56 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
162 Fix compiler warnings:
163 * remote-e7000.c (printf_e7000debug): Rename to puts_e7000debug
164 and have the caller do the sprintf. Saves us from varargs hell.
165 (normal): Define before use.
166 * remote-e7000.c: Reindent a few things.
168 Wed Feb 1 21:16:42 1995 Per Bothner <bothner@kalessin.cygnus.com>
170 * f-typeprint.c (f_type_print_varspec_suffix): Print array index
171 ranges in reverse order.
172 * f-valprint.c (f77_create_arrayprint_offset_tbl): Fix calculation.
174 * eval.c (evaluate_subscript): Don't call value_subscript, since
175 it adjusts for lower bound and enforces ranges.
177 * expression.h (exp_code): Remove MULTI_F77_SUBSCRIPT, OP_F77_SUBSTR.
178 * eval.c, parse.c: Removed uses of removed opcodes.
179 * eval.c (evaluate_subexp): Clean up handling of
180 OP_UNDETERMINED_ARGLIST (no backtracking, more general).
182 * f-valprint.c (f_val_print): Print TYPE_CODE_STRING using
183 LA_PRINT_STRING, and not val_print_string (which reads from inferior).
185 * ch-lang.c (chill_is_varying_struct), ch-lang.h: Remve function
186 duplicate function made redundant by chill_varying_type.
188 Re-write of f77 string and complex number support:
190 * language.h (struct language_defn): New fields string_lower_bound
191 and string_char_type.
192 * c-lang.c (c_language_defn, cplus_language_defn, asm_language_defn),
193 language.c (unknown_language_defn, auto_language_defn,
194 local_language_defn), m2-lang.c (m2_language_defn), f-lang.c
195 (f_language_defn), ch-lang.c (chill_language_defn): Set new fields.
196 * gdbtypes.c (create_string_type): Use new string_char_type field.
197 * valops.c (value_string): Use new string_lower_bound field.
199 * defs.h (TARGET_COMPLEX_BIT, TARGET_DOUBLE_COMPLEX_BIT): Removed.
200 * f-lang.c (f_create_fundamental_type, _initialize_f_language),
201 m2-lang.c (m2_create_fundamental_type),
202 gdbtypes.c (_initialize_gdbtypes): Set TYPE_TARGET_TYPE of complex
203 types. Set their TYPE_CODEs to TYPE_CODE_COMPLEX.
204 * mdebugread.c (mdebug_type_complex, mdebug_type_double_complex):
205 Removed. Use builtin_type_complex and builtin_type_double_complex.
207 * gdbtypes.h (enum type_code): Removed TYPE_CODE_LITERAL_STRING
208 and TYPE_CODE_LITERAL_COMPLEX.
209 * c-typeprint.c, f-typeprint.c, f-valprint.c, eval.c: Removed uses of
210 TYPE_CODE_LITERAL_STRING and TYPE_CODE_LITERAL_COMPLEX.
211 * gdbtypes.c, gdbtypes.h (f77_create_literal_complex_type,
212 f77_create_literal_string_type): Removed.
213 * value.h (VALUE_LITERAL_DATA, VALUE_SUBSTRING_MEMADDR,
214 VALUE_SUBSTRING_MYADDR): Removed.
216 * expression.h (enum exp_opcode): Rename OP_F77_LITERAL_COMPLEX to
218 * parse.c: Update accordingly.
220 * f-valprint.c (f77_print_cmplx): Removed.
221 (f_val_print case TYPE_CODE_COMPLEX): Re-write to use print_floating.
223 * f-exp.y (STRING_LITERAL): Use OP_STRING instead of OP_ARRAY.
224 * eval.c (evaluate_subexp): For case OP_ARRAY, don't call
225 f77_value_literal_string.
226 * valops.c, value.h (f77_value_literal_string, f77_value_substring,
227 f77_assign_from_literal_string, f77_assign_from_literal_complex):
229 (value_assign): No longer need to handle literal types.
230 * valops.c (f77_value_literal_complex), value.h: Re-written and
231 renamed to value_literal_complex. Last arg is now a (complex) type.
232 * valops.c (f77_cast_into_complex): Re-written and renamed to
234 * eval.c (evaluate_subexp): Update accordingly.
236 * ch-valprint.c (chill_val_print): On TYPE_CODE_STRING, don't
237 print address for non-'s'-formats.
238 * ch-typeprint.c, ch-valprint.c: Use chill_varying_type instead
239 of chill_is_varying_struct.
241 Wed Feb 1 13:27:33 1995 Stan Shebs <shebs@andros.cygnus.com>
244 * alpha-tdep.c (alpha_in_lenient_prologue): Comment out.
245 (after_prologue): Remove unused local b.
246 * procfs.c (thread.h): Include.
247 (pr_flag_table, pr_why_table, faults_table, siginfo_table): Use
248 nested braces in initializer.
249 * top.c (initialize_targets, initialize_utils): Declare.
250 (locate_arg, insert_args): Add parens around tested assignments.
251 * remote-utils.c (sr_scan_args): Remove decl of strtol.
252 * remote.c (thread.h): Include.
253 (remote_wait): Remove unused local p2.
254 * sparc-tdep.c (fill_gregset, fill_fpregset): Remove decls of
257 defs.h (stdlib.h): Include.
258 (exit, perror, atoi, qsort, memcpy, memcmp): Don't declare.
259 (fclose, atof, malloc, realloc, free, strchr, strrchr, strstr,
260 strtok, strerror): Don't specify parameter types in declaration.
262 Wed Feb 1 12:23:57 1995 Per Bothner <bothner@kalessin.cygnus.com>
264 * ch-exp.y (value_string_element, string_primitive_value,
265 start_element, left_element, right_element, slice_size,
266 lower_element, upper_element, first_element): Removed.
267 (value_string_slice, value_array_slice): Replaced by ...
268 (slice): New non-terminal, with working slice support.
269 (primitive_value_lparen, rparen): New non-terminals.
270 (maybe_tuple_elements): New non-terminal, to allow empty tuples.
271 (idtokentab): Added "up".
273 * value.h (COERCE_VARYING_ARRAY): New macro.
274 * valarith.c (value_subscript): Use it.
275 * valops.c (value_cast): Likewise. Also, do nothing if already
276 correct type, and allow converting from/to range to/from scalar.
278 * valops.c, value.h (varying_to_slice, value_slice): New functions.
279 * eval.c (OP_ARRAY): Add cast for array element.
280 * expression.h (TERNOP_SLICE, TERNOP_SLICE_COUNT): New exp_opcodes.
281 * valops.c (chill_varying_type): Moved function frp, here ...
282 * gdbtypes.c (chill_varying_type), gdbtypes.h: ... to here.
283 * parse.c (length_of_subexp, prefixify_subexp): Add support
284 for TERNOP_SLICE, TERNOP_SLICE_COUNT.
285 * expprint.c (print_subexp, dump_expression): Likewise.
286 * eval.c (evaluate_subexp): Likewise.
288 * eval.c (evaluate_subexp case MULTI_SUBSCRIPT): Don't call
289 value_x_binop on a Chill varying string.
291 Tue Jan 31 13:51:53 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
293 * config/m68k/monitor.mt,
294 config/pa/{hppabsd.mt,hppahpux.mt,hppaosf.mt,hppapro.mt}: Put
295 depfiles in TDEPFILES not REMOTE_O.
297 Tue Jan 31 11:14:44 1995 Steve Chamberlain <sac@splat>
299 From nigel@algor.co.uk.
300 * ser-go32.c (dos_close): Don't crash if scb null.
301 (dos_sendbreak): New function.
302 (dos_ops): Point to dos_sendbreak.
303 (dos_info): Calculate COM number correctly.
305 Tue Jan 31 09:40:11 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
307 * xcoffread.c (process_xcoff_symbol): Use new variables
308 func_symbol_type and var_symbol_type as type of functions and
309 variables which don't have any stabs associated with them.
310 Reindent most of function.
311 (_initialize_xcoffread): Initialize *_symbol_type.
313 * xcoffread.c (read_xcoff_symtab): Reindent most of function.
314 Put C_HIDEXT symbols in the minimal symbols, rather than ignoring
315 them (this part commented out as I didn't quite get it to work).
316 (cs_to_section, find_targ_sec): New functions, to support above code.
317 * xcoffread.c (RECORD_MINIMAL_SYMBOL): Only skip '.' if it is
320 Mon Jan 30 17:34:24 1995 Stu Grossman (grossman@cygnus.com)
322 * gdbtk.tcl (create_file_win): Disable old popup menu for source
325 * sparcl-tdep.c: Add `sparclite' target for doing serial and udp
326 downloads to SPARClite demo boards.
328 Sun Jan 29 09:43:22 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
330 * remote.c, remote-pa.c: Remove #if 0'd icache code. It has had
331 no hope of working as is for a long time (in particular, shebs' 27
332 Jan 95 change confuses the issue further--target_read_memory and
333 xfer_core_file do *not* do the same thing in this context).
336 Sat Jan 28 13:40:46 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
338 * elfread.c (elf_symtab_read): Do not test BSF_GLOBAL for
339 procedure linkage table symbols, it is no longer set due to the
340 Jan 6 BFD change in bfd/elfcode.h.
342 Fri Jan 27 17:08:06 1995 Stan Shebs <shebs@andros.cygnus.com>
344 * top.c (use_windows): Clarify comments.
346 * convex-tdep.c (xfer_core_file): Comment out.
347 * config/convex/tm-convex.h (XFER_CORE_FILE): Remove.
348 * remote.c, remote-pa.c (remote_fetch_word): Change xfer_core_file
349 references to target_read_memory.
350 * gdbcore.h (xfer_core_file, core_open, core_detach): Remove
352 * corelow.c (core_open, core_detach): Make static.
354 * arm-tdep.c: Make it compile.
355 (exec_file_command, xfer_core_file): Comment out.
356 (arm_print_insn): Remove, now in libopcodes.
357 (skip_prologue): Comment out most of body.
358 (arm_frame_find_saved_regs): Move here from tm-arm.h.
359 (_initialize_arm_tdep): Set tm_print_insn.
360 * config/arm/tm-arm.h: Remove old refs to first_object_file_end.
361 (XFER_CORE_FILE): Remove.
362 (FRAME_FIND_SAVED_REGS): Call arm_frame_find_saved_regs.
364 Fri Jan 27 08:48:28 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
366 * Makefile.in (CHILL_LIB): Define as in testsuite/Makefile.in.
368 Thu Jan 26 18:24:41 1995 Jim Kingdon <kingdon@deneb.cygnus.com>
370 * symtab.c (find_pc_line): When subtracting one to get a line
371 number, make sure not to end up with zero.
373 * remote-vx.c: Revert all of Kung's changes of 16 Jan. The
374 problems with those changes were (a) the file didn't compile, (b)
375 they changed memset to bzero--memset is correct, (c) they took out
376 code to deal with boards lacking floating point, (d) who knows
377 what I didn't discover in a quick read.
379 Thu Jan 26 17:32:54 1995 Stu Grossman (grossman@cygnus.com)
381 * sparcl-tdep.c: Clean up formatting and indentation.
383 Thu Jan 26 10:49:59 1995 Steve Chamberlain <sac@splat>
385 * remote-hms.c (hms_ops): Change ref of hr_load_image
387 (dcache_flush, dcache_hit, dcache_value, dcache_fetch,
388 dcache_poke, dcache_init): Deleted.
389 (hms_open, hms_resume, hms_fetch_word, hms_store_word):
390 Use dcache routines provided by remote-util.h
392 Thu Jan 26 12:08:31 1995 Michael Meissner <meissner@cygnus.com>
394 * configure.in: Add support for powerpc-*-eabi.
396 * powerpc/tm-ppc-eabi.h, powerpc/pcc-eabi.mt: New files for
399 Wed Jan 25 18:13:14 1995 Per Bothner <bothner@kalessin.cygnus.com>
401 * language.h (struct language_defn): New field c_style_arrays.
402 * language.c (unknown_language_defn, auto_language_defn,
403 local_language_defn), c-lang.c (c_language_defn, cplus_language_defn,
404 asm_language_defn): Set c_style_arrays to true.
405 * m2-lang.c (m2_language_defn), ch-lang.c (chill_language_defn),
406 f-lang.c (f_language_defn): Set c_style_arrays to false.
407 * valops.c (value_string): If c_style_array is not set,
408 allocate string in gdb (not inferior) using allocate_value.
410 * value.h (COERCE_ARRAY), valops.c (value_addr, value_arg_coerce):
411 Only call value_coerce_array if current_language->c_style_arrays.
412 * values.c: Add #include "language.h". (Needed for COERCE_ARRAY.)
414 * valops.c (chill_varying_type): New predicate.
415 * valops.c (value_cast): Support assigning a fixed string or array
416 to a variable string/array structure.
418 * valarith.c (value_subscripted_rvalue): Extra parameter lowerbound.
419 Check index>=lowerbound, and then add lowerbound to index here,
420 instead of in caller. Generalize to arbitrary lval_types.
421 (value_subscript): Use enhanced value_subscripted_rvalue if
422 c_style_arrays is false (and index is in range).
424 Wed Jan 25 18:23:46 1995 Stu Grossman (grossman@cygnus.com)
426 * gdbtk.c (gdbtk_init): Prevent segfault when gdbtk.tcl can't be
428 * gdbtk.tcl: Initialize expr_update_list() to prevent errors when
429 popping up expression window for the first time.
431 Wed Jan 25 18:13:14 1995 Per Bothner <bothner@kalessin.cygnus.com>
433 * eval.c (evaluate_subexp case OP_ARRAY): Fix calls to memset:
434 TYPE_LENGTH is length in bytes, not bits.
436 Wed Jan 25 08:19:35 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
438 * infrun.c (proceed): Flush stdout before resuming inferior.
439 * infcmd.c (step_1), annotate.c (annotate_starting):
440 Don't bother to flush here.
442 Wed Jan 25 01:11:21 1995 Jeff Law (law@snake.cs.utah.edu)
444 * hpread.c (hpread_process_one_debug_symbol): Fix lines garbled
445 by an ill-advised global search and replace.
447 Tue Jan 24 12:10:28 1995 Stu Grossman (grossman@cygnus.com)
449 * gdbtk.tcl (create_registers_window): Work around a radiobutton
450 widget bug to make Options|Natural button work.
452 * gdbtk.c (gdb_disassemble): Fix problem with source+assembly and
453 g++ caused by out-of-order pc's.
454 * gdbtk.tcl (files_command): Remove duplicate file names. Also,
457 Mon Jan 23 17:21:09 1995 Stu Grossman (grossman@cygnus.com)
459 * gdbtk.tcl: Take .gdbtkinit if it exists. Makes gdbtk match the
462 Mon Jan 23 13:11:46 1995 Per Bothner <bothner@kalessin.cygnus.com>
464 Add support for Chill bitstring literals (e.h. H'FF00').
465 * ch-exp.y (match_bitstring_literal): Fix for proper endianness.
466 * expprint.c (print_subexp): Don't call error on OP_BITSTRING,
467 just print B'<unimlemented>'.
468 * gdbtypes.c (create_set_type): Fix bug in length calculation.
469 * valops.c, value.h (value_bitstring): New function.
470 * eval.c (evaluate_subexp): Implement support for OP_BITSTRING.
472 * ch-typeprint.c (chill_type_print_base): For TYPE_CODE_FUNC,
473 check that return type is non-void, and print in proper Chill syntax.
475 Mon Jan 23 12:20:34 1995 Rob Savoye <rob@darkstar.cygnus.com>
477 * Makefile.in: Remove references to remote-mon.c.
478 * remote-mon.c: remove. Replaced by rom68k-rom.c.
479 * rom68k-rom.c: Support for Rom68k monitor.
481 Mon Jan 23 10:50:57 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
483 * Makefile.in (CHILL_FOR_TARGET): Update -L argument to point to
484 gcc/ch/runtime not chillrt, since that is where the chill runtime
487 Mon Jan 23 00:06:57 1995 Steve Chamberlain <sac@splat>
489 * remote-hms.c (hms_load): Delete.
490 (target_ops): Use hr_load_image.
492 * remote-e7000.c, remote-z8k.c, remote-nindy.c (target_ops):
493 Define memory_insert/remove_breakpoint.
494 * xm-go32.h: Remove redundant SIGs.
496 Thu Jan 19 20:26:58 1995 Steve Chamberlain <sac@splat>
498 * ser-go32.c: Rewritten by nigel@algor.co.uk.
500 Fri Jan 20 15:23:55 1995 Per Bothner <bothner@kalessin.cygnus.com>
502 * expression.h (OP_LABELED): New operator, for Chill
503 labeled structre tuples.
504 * ch-exp.y (tuple_element, named_record_element, tuple_elements):
505 New non-terminals, to handle labeled structure tuples.
506 (tuple): Re-define using tuple_elements.
507 * eval.c (evaluate_labeled_field_init): New function, to handle
508 initialization of structure fields, possibly using OP_LABELED.
509 (evaluate_subexp): Use it.
510 * expprint.c (print_subexp case): For OP_ARRAY, use Chill syntax
511 for Chill. Handled OP_LABELED.
512 * parse.c (length_of_subexp, prefixify_subexp): Handle OP_LABELED.
514 * eval.c (evaluate_subexp): Handle Chill Powerset tuples.
515 * valarith.c (value_bit_index): Just treat bitstring as represented
516 by an array of bytes. Alignment is handled by compiler.
518 Wed Jan 18 19:00:29 1995 Stan Shebs <shebs@andros.cygnus.com>
520 * h8300-tdep.c (gdb_print_insn_h8300): Fix typo (&info -> info).
521 * sh-tdep.c (gdb_print_insn_sh): Ditto.
523 Wed Jan 18 11:25:43 1995 Kung Hsu <kung@mexican.cygnus.com>
525 * remote-os9k.c (rombug_open): Fix a bug in exception handling
527 * remote-os9k.c (rombug_write_inferior_memory): reset buffer after
530 Tue Jan 17 09:48:38 1995 Jim Kingdon <kingdon@lioth.cygnus.com>
532 * parse.c (_initialize_parse): Improve wording of names of
535 Tue Jan 17 14:00:58 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
537 * config/mips/tm-mips.h (enum mips_fpu_type): New enum.
538 (mips_fpu): Change type to enum mips_fpu_type.
539 (FIX_CALL_DUMMY): Handle mips_fpu == MIPS_FPU_SINGLE.
540 * mips-tdep.c (mips_fpu): Change type to enum mips_fpu_type.
542 (mips_fpu_string): New static variable.
543 (mips_push_dummy_frame): Handle mips_fpu == MIPS_FPU_SINGLE.
544 (mips_pop_frame): Likewise.
545 (mips_extract_return_value): Likewise.
546 (mips_store_return_value): Likewise.
547 (mips_set_fpu_command): New static function.
548 (mips_show_fpu_command): New static function.
549 (_initialize_mips_tdep): Change handling of set/show mipsfpu.
551 Tue Jan 17 09:48:38 1995 Jim Kingdon <kingdon@lioth.cygnus.com>
553 * a29k-tdep.c (gdb_print_insn_a29k): Fix typo (&info -> info).
555 * parse.c (write_exp_msymbol): Use new variables
556 msym_*_symbol_type as type of msymbol expression.
557 (_initialize_parse): Initialize them.
559 Mon Jan 16 18:11:03 1995 Stan Shebs <shebs@andros.cygnus.com>
561 General cleanup and simplication of disassembler interface.
562 * a29k-pinsn.c, arm-pinsn.c, convex-pinsn.c, gould-pinsn.c,
563 hppa-pinsn.c, i386-pinsn.c, i960-pinsn.c, m68k-pinsn.c,
564 m88k-pinsn.c, mips-pinsn.c, ns32k-pinsn.c, pyr-pinsn.c,
565 rs6000-pinsn.c, sparc-pinsn.c, tahoe-pinsn.c, vax-pinsn.c: Remove.
566 * gould-tdep.c, ns32k-tdep.c, tahoe-tdep.c, vax-tdep.c: New files,
567 had been -pinsn.c files.
568 * Makefile.in (ALLDEPFILES): Remove removed files.
569 (a29k-pinsn.o, arm-pinsn.o, convex-pinsn.o, gould-pinsn.o,
570 hppa-pinsn.o, i386-pinsn.o, i960-pinsn.o, m68k-pinsn.o,
571 m88k-pinsn.o, mips-pinsn.o, ns32k-pinsn.o, pyr-pinsn.o,
572 rs6000-pinsn.o, sparc-pinsn.o, tahoe-pinsn.o, vax-pinsn.o):
573 Remove compile actions.
574 * arm-tdep.o, gould-tdep.o, ns32k-tdep.o, tahoe-tdep.o,
575 vax-tdep.o: Add compile actions.
576 * defs.h (tm_print_insn): New global.
577 * a29k-tdep.c (gdb_print_insn_a29k): New function.
578 (_initialize_a29k_tdep): Rename from _initialize_29k,
580 * alpha-tdep.c (print_insn): Remove.
581 (_initialize_alpha_tdep): Set tm_print_insn.
582 * arm-tdep.c (arm_print_insn): New function, was print_insn
584 * convex-tdep.c (convex_print_insn): New function, was print_insn
586 * h8300-tdep.c (print_insn): Remove.
587 (gdb_print_insn_h8300): New function.
588 (_initialize_h8300_tdep): New function.
589 * h8500-tdep.c (print_insn): Remove.
590 (_initialize_h8500_tdep): New function.
591 * hppa-tdep.c (_initialize_hppa_tdep): Set tm_print_insn.
592 * i386-tdep.c (_initialize_i386_tdep): New function.
593 * i960-tdep.c (mem, next_insn): New functions, were in
595 (_initialize_i960_tdep): Set tm_print_insn.
596 * m68k-tdep.c (_initialize_m68k_tdep): New function.
597 * m88k-tdep.c (_initialize_m88k_tdep): New function.
598 * mips-tdep.c (gdb_print_insn_mips): New function.
599 (_initialize_mips_tdep): Set tm_print_insn.
600 * pyr-tdep.c (pyr_print_insn): New function, was print_insn
602 * rs6000-tdep.c (_initialize_rs6000_tdep): New function.
603 * sh-tdep.c (print_insn): Remove.
604 (gdb_print_insn_sh): New function.
605 (_initialize_sh_tdep): Set tm_print_insn.
606 * sparc-tdep.c (_initialize_sparc_tdep): New function.
607 * w65-tdep.c (print_insn): Remove.
608 (_initialize_w65_tdep): New function.
609 * z8k-tdep.c (print_insn): Remove.
610 (gdb_print_insn_z8k): New function.
611 (_initialize_z8k_tdep): Set tm_print_insn.
612 * printcmd.c (print_insn): New function, generic disassembler.
613 * config/*/*.mt (TDEPFILES): Remove refs to *-pinsn.o.
615 Mon Jan 16 15:43:29 1995 Kung Hsu <kung@mexican.cygnus.com>
617 * Makefile.in: add new files remote-vx29k.c, config/a29k/tm-vx29k.h,
618 and config/a29k/vx29k.mt.
619 * configure.in: add new configuration a29k-*-vxworks.
620 * remote-vx29k.c: new file merged from WRS.
621 * remote-vx.c: merge changes from WRS.
622 * config/a29k/vx29k.mt: new file for new configuration.
623 * config/a29k/tm-vx29k.h: new header file for newconfiguration.
625 Sun Jan 15 14:36:19 1995 Steve Chamberlain <sac@splat>
627 * breakpoint.h (disable_breakpoint, enable_breakpoint):
629 (enum bpdisp): Change name of 'delete' member to 'del'.
630 (struct bpstat): Changed name to 'bpstats'.
631 * breakpoint.c (disable_breakpoint, enable_breakpoint,
632 breakpoint_chain): Made globally visible.
633 (bpstat_stop_status): Use new name for bpstat.
634 (break_command_1, watch_command_1, catch_command_1,
635 breakpoint_auto_delete, denable_delete_breakpoint): Use 'del'
637 (set_breakpoint_sal): New function.
638 * defs.h (registers_changed_hook): New declaration.
639 * infcmd.c (run_stack_dummy): 'delete' is now 'del'.
640 * inflow.c (new_tty): Treat WIN32 in same way as __GO32__
641 * main.c (main): Don't scan options when in WIN32 and exit
642 without entering main loop.
643 * m2-exp.y (m2_elx): Member 'class' is now 'aclass'.
644 * symtab.h (struct symbol, struct partial_symbol): Changed name of
645 member 'class' to 'aclass'.
646 (SYMBOL_CLASS, PSYMBOL_CLASS): Reflect change.
647 * top.c (registers_changed_hook): New definition.
648 * utils.c (quit, notice_quit, initialize_utils): Treate WIN32
649 in same way as __GO32__.
650 * value.h (c_typedef_print): Rename 'new' argument.
652 * w65-tdep.c, config/tm-w65.h, config/w65.mt: New files.
653 * configure.in: Suppprt for w65,
656 Sat Jan 14 11:18:11 1995 Jim Kingdon <kingdon@lioth.cygnus.com>
658 * infcmd.c (signal_command): For "signal 0", pass (CORE_ADDR)-1,
659 not stop_pc, to proceed.
661 * eval.c (evaluate_subexp): Clear expect_type except for C++ and CHILL.
663 Fri Jan 13 17:52:57 1995 Jim Kingdon <kingdon@lioth.cygnus.com>
665 * infcmd.c (signal_command): Accept "signal 0"; the change to not
666 accept it was accidental. "handle 0" and "info signal 0" remain
669 Fri Jan 13 15:19:01 1995 Stan Shebs <shebs@andros.cygnus.com>
671 * Makefile.in (all): Don't make libgdb-files.
672 (libgdb): New action, makes libgdb-files.
674 Thu Jan 12 21:23:25 1995 Per Bothner <bothner@kalessin.cygnus.com>
676 * stabsread.c (read_enum_type): When pending enum symbols are
677 put into the enum type, they must be inserted in "backwards
678 order, in case we've overflowed a struct pending buffer.
681 Thu Jan 12 15:02:40 1995 Stu Grossman (grossman@cygnus.com)
683 * gdbtk.c, gdbtk.tcl: Update/add copyright.
684 * gdbtk.tcl (build_framework): Several fixes for filespec widget,
685 including dismiss button, and better error handling.
686 * (create_command_win): Bind button 2 to retrieve selection.
689 Thu Jan 12 09:33:24 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
691 * README: Add note about SPARCworks cc release 3.0 and higher.
693 Add procfs support for Alpha OSF/1-2.x.
694 * config/alpha/nm-osf.h: Renamed from nm-alpha.h, generic
695 OSF/1 native support.
696 * config/alpha/alpha-osf1.mh (NAT_FILE): Changed accordingly.
697 (MUNCH_DEFINE): Removed.
698 * config/alpha/alpha-osf2.mh, config/alpha/nm-osf2.h: New files
700 * configure.in (alpha-dec-osf*): Use alpha-osf2.mh for OSF/1
701 release 2.x and higher, else alpha-osf1.mh, as the procfs support
702 in release 1.x is incomplete.
703 * Makefile.in (ALLCONFIG): Add config/alpha/alpha-osf2.mh.
704 * alpha-nat.c (supply_gregset, fill_gregset, supply_fpgregset,
705 fill_fpgregset): New routines for procfs support.
706 * inftarg.c (_initialize_inftarg): Don't add ptrace support
707 if we have an optional procfs and /proc is accessible.
708 * procfs.c: Include sys/fault.h and sys/syscall.h before
709 including sys/procfs.h.
710 (unconditionally_kill_inferior): If PROCFS_NEED_PIOCSSIG_FOR_KILL
711 is defined, additionally perform a PIOCSSIG to really terminate
713 (create_procinfo): Always return a result.
714 (create_procinfo, do_attach): Don't trace T_IFAULT faults if
715 PROCFS_DONT_TRACE_IFAULT is defined.
716 (procfs_init_inferior): Use START_INFERIOR_TRAPS_EXPECTED as
717 argument to startup_inferior if it is defined.
718 (proc_set_exec_trap): If PIOCSSPCACT is defined, use it instead
719 of tracing exits from exec system calls. Needed for the user level
720 loader under Alpha OSF/1.
721 (do_detach): Clear any pending signal if we want to detach from
722 a process without a signal.
723 (set_proc_siginfo): If PROCFS_DONT_PIOCSSIG_CURSIG is defined,
724 don't issue a PIOCSSIG if pr_cursig already contains the signal we
726 (info_proc_signals): If PROCFS_SIGPEND_OFFSET is defined, the
727 pending signals are numbered from 1 instead of 0.
728 (info_proc_mappings): Increase size of output format for addresses
729 if BFD_HOST_64_BIT is defined.
730 (procfs_stop): Renamed from child_stop.
731 (_initialize_procfs): Don't add procfs support if we have an
732 optional procfs and /proc is not accessible.
735 Wed Jan 11 17:06:55 1995 Stu Grossman (grossman@cygnus.com)
737 * gdbtk.tcl: Add button to control mixed source disassembly.
738 Use text widgets in expr window. The give me more control over
740 Add auto-updating of exprs in expression window.
741 Handle expressions out of scope a bit better.
742 Make selected window pop up to the top when invoked via the
744 Make copyright message have raised relief.
746 * gdbtk.c (gdbtk_init): Improve handling for errors in gdbtk.tcl
750 Wed Jan 11 17:53:26 1995 Rob Savoye <rob@darkstar.cygnus.com>
752 * array-rom.c: Add support for most commands.
754 * monitor.c: Add GDB remote protocol for the hybrid environment on
757 Wed Jan 11 00:44:01 1995 Jeff Law (law@snake.cs.utah.edu)
759 * command.c (show_user_1): Use print_command_line to show a user
760 defined command (including control structures).
762 * top.c (init_main): Change documentation for user defined
763 commands to indicate they may accept up to ten arguments.
765 Tue Jan 10 16:22:41 1995 Jim Kingdon <kingdon@lioth.cygnus.com>
767 * mips-tdep.c (mips_skip_prologue): Accept or as well as addu for
768 `move $s8, $sp' instruction.
770 Sun Jan 8 12:45:34 1995 Jim Kingdon <kingdon@deneb.cygnus.com>
772 * target.c, target.h (target_signal_from_command): New function.
773 * infrun.c (handle_command, signals_info), infcmd.c
774 (signal_command): Use it.
775 * infrun.c, infcmd.c: Update docstrings for these commands.
777 * target.h (enum target_signal), target.c (signals), target.c
778 (target_signal_from_host, target_signal_to_host): Add
779 TARGET_SIGNAL_REALTIME_* and TARGET_SIGNAL_PRIO for lynx.
780 * config/tm-lynx.h: Define signal numbers for realtime events.
782 Sat Jan 7 07:23:53 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
784 * dbxread.c (process_one_symbol): Handle N_FUN symbols
785 for Sun acc 3.0 under SunOS4.
787 Changes to improve handling of runtime common symbols
789 * minsyms.c (get_symbol_leading_char): New routine to determine
790 the leading symbol character for an objfile.
791 (prim_record_minimal_symbol_and_info, install_minimal_symbols):
793 * objfiles.h (rt_common_objfile): New global, points to objfile
794 containing the runtime common minimal symbols.
795 * objfiles.c (free_objfile): Mark rt_common_objfile as
796 unallocated before freeing it.
797 * solib.c (allocate_rt_common_objfile): New routine to allocate
798 an objfile for the runtime common minimal symbols.
799 (solib_add_common_symbols): Allocate an objfile for the runtime
800 common symbols if necessary and put common symbols into it.
801 Clean up code and comments.
802 (solib_add, special_symbol_handling): Cleanup comments regarding
803 runtime common symbols.
804 * stabsread.c (scan_file_globals_1): New routine, contains
805 old scan_file_globals code. Checks if there are any unresolved
806 global symbols before starting the expensive minimal symbol table
808 (scan_file_globals): Now calls scan_file_globals_1 for the passed
809 objfile and eventually for the runtime common objfile. Complains
810 about any unresolved global symbols and removes them from the
811 global symbol chain to avoid dangling pointers into the symbol
812 table if the symbol table is reread.
814 Thu Jan 5 17:38:29 1995 Stu Grossman (grossman@cygnus.com)
816 * Makefile.in (install_only uninstall): Indent for clarity.
818 * core.c (dis_asm_read_memory): Add call to
819 dis_asm_read_memory_hook to provide alternate way for disassembler
822 * defs.h: Protect from multiple inclusion. Add decl for
823 dis_asm_read_memory_hook.
825 * top.c: Make window startup be the default.
826 * Add dis_asm_read_memory_hook.
829 * gdbtk.c (finish_saving_output): Don't do anything if not saving
831 * (breakpoint_notify): Don't send null filename to tcl.
832 * (gdb_eval): New tcl command to eval an expression.
833 * (gdb_disassemble): New tcl command to do disassembly. This
834 allows tcl code to choose between exec file and target memeory,
835 and can also do mixed source and assembly.
836 * (gdbtk_init): Move reading of gdbtk.tcl to the end to make sure
837 that more of the environment is set up. Also, create link between
838 gdb and tcl vars disassemble{-_}from{-_}exec.
840 * gdbtk.tcl: New expression window support.
841 * Make assembly window be 80 columns wide.
842 * Use new disassembly method. Add menu items to select
843 disassembly from exec file or target.
844 * Change View menubar item to Options.
846 * Get rid of Stack, Breakpoints, Signals, and Variables Windows,
847 since they don't exist yet.
849 * Pop up a copyright window on startup.
852 Thu Jan 5 01:16:40 1995 Jeff Law (law@snake.cs.utah.edu)
854 * stabsread.c (define_symbol): Handle `a' symbol type used for
855 reference parameter passed in a register.
858 Wed Jan 4 19:49:10 1995 Stan Shebs <shebs@andros.cygnus.com>
860 * gdbtk.tcl (build_framework): Add standard commands menu, more
861 windows to standard windows menu.
862 (not_implemented_yet): Clarify message.
865 Wed Jan 4 12:27:29 1995 Kung Hsu <kung@mexican.cygnus.com>
867 * defs.h: move include tm.h up, so that the type LONGEST can
868 also based on the target requirement to determine. In this case
871 * remote-os9k.c (rombug_open): catch exception e in rombug.
872 * remote-os9k.c (rombug_wait): print message before register display
875 Wed Jan 4 09:18:27 1995 Jim Kingdon (kingdon@lioth.cygnus.com)
877 * top.c (locate_arg): Call strchr not index.
879 Tue Jan 3 16:52:03 1995 Per Bothner <bothner@kalessin.cygnus.com>
881 * ch-exp.y (literal): Recognize NULL.
882 (tuple): Parse simple unlabelled tuples.
883 * eval.c (evaluate_subexp case OP_ARRAY): Use expect_type to
884 evaluate brace-initializer-expressions depending on context.
885 (evaluate_subexp case UNOP_CAST): Pass the target type as
886 expected type when evaluating the expression.
888 * ch-typeprint.c (chill_type_print_base): Get names of PTR and
890 * ch-valprint.c (chill_print_type_scalar): New function, to handle
891 TYPE_CODE_RANGE better than print_type_scalar does.
892 (chill_val_print_array_elements): Use above new function.
894 Mon Jan 2 15:02:51 1995 Stan Shebs <shebs@andros.cygnus.com>
896 * remote-udi.c (udi_load): Tell symbol_file_add that the
897 program being loaded is the main program.
899 For older changes see ChangeLog-94
905 version-control: never