1 2009-04-18 Carlos O'Donell <carlos@codesourcery.com>
3 * Makefile.in (MAKEHTML): Set to makeinfo --html.
4 (MAKEHTMLFLAGS): Set to empty.
6 2009-04-18 Eli Zaretskii <eliz@gnu.org>
8 * NEWS: Mention all new set/show commands added since GDB 6.8 was
11 * go32-nat.c (go32_sysinfo): Check if the call to
12 __dpmi_get_capabilities fills the buffer with information, and
13 don't use the buffer if not.
15 2009-04-17 Tom Tromey <tromey@redhat.com>
17 * charset.c (_initialize_charset): Add special case for "646".
19 2009-04-17 Carlos O'Donell <carlos@codesourcery.com>
21 * configure.ac: AC_SUBST datarootdir, docdir, htmldir, pdfdir.
22 * configure: Regenerate.
23 * Makefile.in: Set datarootdir, docdir, htmldir, and pdfdir from
24 configure substitutions.
25 (FLAGS_TO_PASS): Add datarootdir, docdir, and htmldir.
27 2009-04-17 Pierre Muller <muller.u-strasbg.fr>
29 ARI fix: Do not use %p, replace by call to host_address_to_string
31 * darwin-nat.c (darwin_xfer_partial): Apply change.
32 * gnu-nat.c (inf_continue, gnu_xfer_memory): Ditto.
33 * gnu-nat.h (proc_debug): Ditto.
34 * symmisc.c (maintenance_info_symtabs): Ditto.
35 (maintenance_info_psymtabs): Ditto.
36 * windows-nat.c (handle_load_dll): Ditto.
37 (handle_unload_dll, info_w32_command, handle_exception): Ditto.
38 * xtensa-tdep.c (xtensa_unwind_pc): Ditto.
40 2009-04-17 Joseph Myers <joseph@codesourcery.com>
42 * configure.tgt (i[34567]86-*-linux*): Use 64-bit configuration if
44 (sparc-*-linux*): Likewise.
46 2009-04-17 Eli Zaretskii <eliz@gnu.org>
48 * go32-nat.c (go32_sysinfo): Update list of Windows versions of
51 2009-04-16 Pedro Alves <pedro@codesourcery.com>
53 * remote.c (remote_query_attached): Fix pasto in packet_ok result
56 2009-04-16 Joel Brobecker <brobecker@adacore.com>
58 * procfs.c (solib_mappings_callback, find_memory_regions_callback):
59 Revert the previous change. Might not be correct, actually.
61 2009-04-16 Joel Brobecker <brobecker@adacore.com>
63 * ada-lang.h (ada_adjust_exception_stop, ada_print_exception_stop)
64 (ada_get_current_task, ada_print_exception_breakpoint_nontask)
65 (ada_print_exception_breakpoint_task, ada_reset_thread_registers):
66 Remove declaration. These are non-existent functions.
68 2009-04-16 Joel Brobecker <brobecker@adacore.com>
70 * procfs.c (solib_mappings_callback, find_memory_regions_callback):
71 Fix a compilation warning on mips-irix due to casting from
72 a pointer of different size.
74 2009-04-16 Joel Brobecker <brobecker@adacore.com>
76 * ada-lang.c (symtab_for_sym): Delete.
77 (user_select_syms): Use sym->symtab instead of calling symtab_for_sym.
79 2009-04-16 Joel Brobecker <brobecker@adacore.com>
81 * ada-lang.c (extract_string): Delete.
82 (ada_main_name): Reimplement using target_read_string instead of
85 2009-04-16 Andreas Schwab <schwab@linux-m68k.org>
87 * m68klinux-nat.c: Remove obsolete comment.
88 (fetch_register, store_register): Don't call
89 gdbarch_cannot_fetch_register or gdbarch_cannot_store_register,
90 which are always nops here.
92 2009-04-14 Tom Tromey <tromey@redhat.com>
94 * c-lang.c (c_emit_char): Use INTERMEDIATE_ENCODING.
95 (c_printstr): Likewise.
96 * charset.c: Include gdb_wait.h.
97 (make_wchar_iterator): Use INTERMEDIATE_ENCODING.
98 (find_charset_names): Use pexecute. Handle libiconv's output.
100 (_initialize_charset): Use xstrdup.
101 * gdb_wchar.h: Check HAVE_BTOWC. Split PHONY_ICONV and wchar
103 (INTERMEDIATE_ENCODING): New define.
104 * configure, config.in: Rebuild.
105 * configure.ac: Check for btowc.
107 2009-04-15 Tom Tromey <tromey@redhat.com>
109 * c-lang.c (evaluate_subexp_c): Correctly handle EVAL_SKIP.
111 2009-04-15 Eli Zaretskii <eliz@gnu.org>
113 * utils.c (parse_escape): Initialize target_char to pacify GCC.
115 2009-04-14 Jan Kratochvil <jan.kratochvil@redhat.com>
117 * c-lang.c (c_get_string): Fix xfree crash on a failed string read.
119 2009-04-14 Pierre Muller <muller@ics.u-strasbg.fr>
121 ARI fix: sprintf rule.
122 * ada-exp.y (convert_char_literal): Replace sprintf by xsnprintf.
123 * ada-lang.c (add_angle_brackets): Use xstrprintf.
124 (ada_decode): Replace sprintf by xsnprintf.
125 (find_old_style_renaming_symbol): Ditto.
126 (ada_to_fixed_type_1, ada_enum_name): Ditto.
129 2009-04-14 Joel Brobecker <brobecker@adacore.com>
131 * target.c (target_mourn_inferior): Call bfd_cache_close_all
132 after having executed the target mourn_inferior routine.
134 2009-04-14 Eli Zaretskii <eliz@gnu.org>
136 * config/djgpp/djconfig.sh (DEPDIR): Define to "_deps", if
139 2009-04-13 David Daney <ddaney@caviumnetworks.com>
141 * infrun.c (maybe_software_singlestep): New function.
142 (resume): Call maybe_software_singlestep.
143 (handle_inferior_event): Same.
145 2009-04-13 Tom Tromey <tromey@redhat.com>
147 * python/python-frame.c (frapy_richcompare): Return
148 Py_NotImplemented, not an error. Handle Py_NE as well.
150 2009-04-13 Eli Zaretskii <eliz@gnu.org>
152 * charset.c (EILSEQ): Define if not defined by system headers.
154 2009-04-11 Eli Zaretskii <eliz@gnu.org>
156 * config/djgpp/config.sed: Tweak ac_config_files in intl/configure
157 to be consistent with renaming config.intl.in into config_intl.in.
159 * go32-nat.c (go32_attach, go32_detach): Fix prototypes to be
160 consistent with the change from 2008-11-09.
162 2009-04-10 Jan Kratochvil <jan.kratochvil@redhat.com>
164 * gdbtypes.c: Remove excessive parentheses at the return keywords.
165 * varobj.c (varobj_invalidate): Fix indentation.
166 * varobj.c (varobj_invalidate): Fix formatting text width.
168 2009-04-08 Vladimir Prus <vladimir@codesourcery.com>
170 Implement -exec-jump.
172 * mi/mi-cmds.h (mi_cmd_exec_jump): Declare.
173 * mi/mi-main.c (mi_cmd_exec_jump): New.
174 * mi/mi-cmds.c (mi_cmds): Register exec-jump.
176 2009-04-07 Doug Evans <dje@google.com>
178 * symfile.c (symbol_file_clear): Fix indentation.
180 2009-04-06 Mark Kettenis <kettenis@gnu.org>
182 * sparc64nbsd-nat.c (sparc64nbsd_supply_pcb): Fix comment.
184 2009-04-03 Ulrich Weigand <uweigand@de.ibm.com>
186 * ppc-linux-nat.c (ppc_linux_target_wordsize): New function.
187 (ppc_linux_auxv_parse): New function.
188 (ppc_linux_read_description): Use ppc_linux_target_wordsize.
189 (_initialize_ppc_linux_nat): Install ppc_linux_auxv_parse.
191 2009-04-03 Ulrich Weigand <uweigand@de.ibm.com>
193 * spu-linux-nat.c (spu_bfd_open): Set filename of in-memory
194 BFD to contents of SPU name note.
195 (spu_symbol_file_add_from_memory): Call symbol_file_add_from_bfd
196 with "from_tty" argument 1 instead of 0.
198 2009-04-02 Jan Kratochvil <jan.kratochvil@redhat.com>
201 (new_symbol <DW_TAG_variable> <!DW_AT_location> <DW_AT_external>):
202 Create the symbol in local scope.
203 * symtab.h (cu->list_in_scope <LOC_UNRESOLVED>): New comment part.
205 2009-04-02 Keith Seitz <keiths@redhat.com>
207 * stabsread.c (read_member_functions): GCC may emit an extra space
208 at the end of the names "__base_ctor" and "__base_dtor"; so ignore
209 whitespace when looking for these functions.
211 2009-04-01 Joel Brobecker <brobecker@adacore.com>
213 Change the default value for "set print frame-arguments" to scalars.
215 * stack.c (print_frame_arguments): Set initial value to "scalars".
217 2009-04-01 Aleksandar Ristovski <aristovski@qnx.com>
219 * mips-tdep.c (mips_numeric_register_alieses): New definition.
220 (mips_gdbarch_init): Add user registers from
221 mips_numeric_register_aliases.
223 2009-04-01 Joel Brobecker <brobecker@adacore.com>
225 * linux-nat.c (linux_nat_filter_event): Minor comment reformatting.
227 2009-04-01 Joel Brobecker <brobecker@adacore.com>
229 * linux-nat.c (linux_nat_filter_events): Do not delete the lwp if
230 this is the last one.
232 2009-04-01 Pedro Alves <pedro@codesourcery.com>
234 * remote.c (append_resumption): New.
235 (remote_vcont_resume): Use it.
237 2009-04-01 Joel Brobecker <brobecker@adacore.com>
239 * windows-nat.c (+windows_get_ada_task_ptid): New function.
240 (init_windows_ops): Set windows_ops.to_get_ada_task_ptid.
242 2009-03-31 Daniel Jacobowitz <dan@codesourcery.com>
243 Keith Seitz <keiths@redhat.com>
244 Jan Kratochvil <jan.kratochvil@redhat.com>
247 * Makefile.in (dbxread.o): Update.
248 * dbxread.c (read_dbx_symtab): Use cp_canonicalize_string.
249 * dwarf2read.c (GDB_FORM_cached_string): New.
250 (read_partial_die): Use dwarf2_canonicalize_name.
251 (dwarf2_linkage_name): Use dwarf2_name.
252 (dwarf2_canonicalize_name): New.
253 (dwarf2_name): Use dwarf2_canonicalize_name.
254 (dwarf_form_name, dump_die): Handle GDB_FORM_cached_string.
255 * stabsread.c (define_symbol, read_type): Use cp_canonicalize_string.
256 * symtab.c (lookup_symbol_in_language): Canonicalize input before
258 * cp-name-parser.y: operator() requires two parameters,
259 according to libiberty.
260 * minsyms.c (lookup_minimal_symbol): Canonicalize input
264 2009-03-31 Joel Brobecker <brobecker@adacore.com>
266 Provide support for (Ada) task-specific breakpoints.
268 * ada-lang.h (ada_get_task_number): Add declaration.
269 (breakpoint_ada_task_match): Delete declaration.
270 * ada-tasks.c (ada_get_task_number): Make non-static.
271 * breakpoint.h (struct breakpoint): Add field "task".
272 * breakpoint.c (print_one_breakpoint_location): Add handling of
273 task-specific breakpoints.
274 (create_breakpoint, create_breakpoints, find_condition_and_thread):
275 New parameter "task".
276 (break_command_really): Update calls to find_condition_and_thread
277 and create_breakpoints.
278 (breakpoint_re_set_one): Update call to find_condition_and_thread.
281 2009-03-31 Joel Brobecker <brobecker@adacore.com>
283 * ada-tasks.c (short_task_info): Eliminate the "Running" task state.
285 2009-03-31 Pedro Alves <pedro@codesourcery.com>
287 * remote.c (remote_notice_new_inferior): Use ptid_is_pid. Check
288 if the thread's ptid without a thread id field is in the list
289 before calling thread_change_ptid.
290 (extended_remote_attach_1): In non-stop mode, do not rely on
291 querying the current thread, instead, query the thread list, and
292 select the first thread of the process.
293 * gdbthread.h (first_thread_of_process): Declare.
294 * thread.c (first_thread_of_process): Define.
296 2009-03-30 Stan Shebs <stan@codesourcery.com>
298 Make tracepoints into a type of breakpoint.
299 * breakpoint.h (enum bptype): Add bp_tracepoint.
300 (struct breakpoint): Add fields step_count, pass_count, actions.
301 (get_tracepoint, get_tracepoint_by_number): Declare.
302 (all_tracepoints): Declare.
303 * breakpoint.c: Include tracepoint.h, readline.h.
304 (ALL_TRACEPOINTS): Move here from tracepoint.c.
305 (tracepoint_count): Ditto.
306 (should_be_inserted): GDB does not insert tracepoints itself.
307 (print_it_typical): Add tracepoint case.
308 (bpstat_what): Ditto.
309 (print_one_breakpoint_location): Ditto, and add printing for
310 pass count, step count, and action list.
311 (user_settable_breakpoint): Add tracepoint case.
312 (allocate_bp_location): Ditto.
313 (set_breakpoint_location_function): Ditto.
314 (disable_breakpoints_in_shlibs): Ditto.
316 (break_command_really): Add argument traceflag, use to choose
317 basic breakpoint type.
318 (break_command_1): Pass extra argument.
319 (set_breakpoint, handle_gnu_v3_exceptions): Ditto.
320 (breakpoint_re_set_one): Add tracepoint case.
321 (disable_command, enable_command): Ditto.
322 (set_tracepoint_count): Move here from tracepoint.c.
323 (trace_command): Move here from tracepoint.c and use
324 break_command_really.
325 (tracepoints_info): Move here from tracepoint.c and call
327 (enable_trace_command): Move here from tracepoint.c and call
329 (disable_trace_command): Move here from tracepoint.c and call
331 (delete_trace_command): Move here from tracepoint.c and call
333 (trace_pass_command): Move here from tracepoint.c.
334 (get_tracepoint_by_number): Ditto.
335 (tracepoint_save_command): Ditto.
336 (get_tracepoint): New function.
337 (all_tracepoints): New function.
338 (_initialize_breakpoint): Move tracepoint init from tracepoint.c,
339 deprecate "enable trace" and "disable trace" commands.
340 * tracepoint.h (struct tracepoint): Remove.
341 (tracepoint_chain): Remove decl.
342 (deprecated_create_tracepoint_hook): Remove decl.
343 (deprecated_delete_tracepoint_hook): Remove decl.
344 (deprecated_modify_tracepoint_hook): Remove decl.
345 (ALL_TRACEPOINTS, ALL_TRACEPOINTS_SAFE): Remove.
346 (free_actions): Update signature.
347 (validate_actionline): Update signature.
348 (end_actions_pseudocommand): Declare.
349 (while_stepping_pseudocommand): Declare.
350 * tracepoint.c: Include breakpoint.h.
351 (tracepoint_chain, tracepoint_count): Remove.
352 (free_actions, make_cleanup_free_actions): Update signature.
353 (trace_command, set_raw_tracepoint): Remove.
354 (trace_mention): Remove.
355 (tracepoints_info): Remove.
356 (tracepoint_operation, map_args_over_tracepoints): Remove.
357 (get_tracepoint_by_number): Remove.
358 (enable_trace_command, disable_trace_command): Remove.
359 (delete_trace_command, trace_pass_command): Remove.
360 (trace_actions_command, read_actions): Update signature.
361 (validate_actionline): Update signature, use bp loc.
362 (encode_actions): Ditto.
363 (download_tracepoint): New function, body of trace_start_command.
364 (trace_start_command): Call it, use all_tracepoints.
365 (tracepoint_save_command): Remove.
366 (tracepoint_dump_command): Use get_tracepoint.
367 (end_actions_pseudocommand): Make globally visible.
368 (while_stepping_pseudocommand): Ditto.
369 (_initialize_tracepoint): Move command definitions to breakpoint.c.
371 2009-03-30 Thiago Jung Bauermann <bauerman@br.ibm.com>
373 Expose frames to Python.
374 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-frame.o.
375 (SUBDIR_PYTHON_SRCS): Add python-frame.c.
376 (python-frame.o): New target.
377 * python/python-frame.c: New file.
378 * python/python-internal.h (gdbpy_frames, gdbpy_newest_frame,
379 gdbpy_frame_stop_reason_string, gdbpy_selected_frame,
380 gdbpy_initialize_frames): New prototypes.
381 * python/python.c (_initialize_python): Call gdbpy_initialize_frames.
382 (GdbMethods): Add `selected_frame' and `frame_stop_reason_string'
384 * stack.c (find_frame_funname): New function, factored out of
386 (print_frame): Call find_frame_funname.
387 * stack.h (find_frame_funname): Add prototype.
389 2009-03-29 Thiago Jung Bauermann <bauerman@br.ibm.com>
391 Remove unused value_object attribute `owned_by_gdb'.
392 * python/python-value.c (value_object): Remove owned_by_gdb
394 (valpy_dealloc): Remove reference to self->owned_by_gdb.
395 (valpy_new): Likewise.
396 (value_to_value_object): Likewise.
398 2009-03-29 Thiago Jung Bauermann <bauerman@br.ibm.com>
400 Change gdb.Value.address from a method to an attribute.
401 * python/python-value.c (value_object): Add `address' element.
402 (valpy_dealloc): Decrement reference to self->address if set.
403 (valpy_new): Initialize val_obj->address.
404 (valpy_address): Rename to ...
405 (valpy_get_address): ... this. Change signature from method to
406 attribute. Update self->address if not set.
407 (value_to_value_object): Initialize val_obj->address.
408 (value_object_getset): Add `address' element.
409 (value_object_methods): Remove `address' element.
411 2009-03-29 Andreas Schwab <schwab@linux-m68k.org>
413 * observer.sh: Set LANG/LC_ALL to C, not c.
415 2009-03-28 Kevin Buettner <kevinb@redhat.com>
417 * mn10300-tdep.c (mn10300_gdbarch_init): For mn10300, by default,
420 2009-03-28 Pedro Alves <pedro@codesourcery.com>
422 * remote.c (remote_stop_ns): If multi-process extensions are off,
423 and GDB is requesting the whole process to stop, sent "vCont;t",
426 2009-03-28 Pedro Alves <pedro@codesourcery.com>
428 * inf-loop.c (inferior_event_handler): Avoid calling is_running on
431 2009-03-27 Eli Zaretskii <eliz@gnu.org>
433 * config/djgpp/fnchange.lst: Update to fix ARI-reported problems.
435 2009-03-26 Doug Evans <dje@google.com>
437 * thread.c (do_restore_current_thread_cleanup): Redo test for
438 whether to restore old->inferior_ptid.
440 2009-03-26 Tom Tromey <tromey@redhat.com>
442 * breakpoint.c (resolve_sal_pc): Preserve original line number
443 when skipping prologue.
445 2009-03-26 Doug Evans <dje@google.com>
447 * thread.c (inferior_thread) Remove "extern" in definition.
449 2009-03-26 Thiago Jung Bauermann <bauerman@br.ibm.com>
451 Add gdb.Value.is_optimized_out attribute.
452 * python/python-value.c (valpy_get_is_optimized_out): New
454 (value_object_getset): New variable.
455 (value_object_type): Initialize tp_getset element.
457 2009-03-26 Joel Brobecker <brobecker@adacore.com>
459 Recognize missing DW_AT_location as <value optimized out>.
461 (new_symbol <DW_TAG_variable> <!DW_AT_location> <!DW_AT_external>):
462 Call add_symbol_to_list.
464 2009-03-25 Tom Tromey <tromey@redhat.com>
466 * gdbtypes.h (CHECK_TYPEDEF): Don't yield a value.
467 * stack.c (print_this_frame_argument_p): Use check_typedef.
469 2009-03-25 Tom Tromey <tromey@redhat.com>
471 * configure: Rebuild.
472 * acinclude.m4 (AM_ICONV): Set am_cv_use_build_libiconv.
473 Rearrange flags setting. Add comments.
475 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
477 * config/i386/nm-i386.h: Remove code within
478 I386_WATCHPOINTS_IN_TARGET_VECTOR conditional.
479 * config/i386/nm-cygwin.h: Remove I386_WATCHPOINTS_IN_TARGET_VECTOR
481 * config/i386/nm-cygwin64.h: Ditto.
482 * config/i386/nm-fbsd.h: Ditto.
483 * config/i386/nm-go32.h: Ditto.
484 * config/i386/nm-linux.h: Ditto.
485 * config/i386/nm-linux64.h: Ditto.
487 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
489 ARI fix: "xasprintf" rule.
490 * printcmd.c (sym_info): Replace xasprintf by xstrprintf.
492 2009-03-25 Pedro Alves <pedro@codesourcery.com>
494 * remote.c (remote_start_remote): In non-stop mode, call
495 init_wait_for_inferior before adding threads and inferiors.
497 2009-03-25 Joel Brobecker <brobecker@adacore.com>
499 * breakpoint.c (breakpoint_thread_match): Split a large condition
500 into several smaller conditions. No behavior change.
502 2009-03-25 Pedro Alves <pedro@codesourcery.com>
504 * infrun.c (infrun_thread_thread_exit): New.
505 (_initialize_infrun): Attach it to the thread_exit observer.
506 * thread.c (delete_thread_1): Always call the observer, passing it
508 * mi/mi-interp.c (mi_thread_exit): Add "silent" parameter. If
509 SILENT, return immediately.
511 2009-03-25 Pedro Alves <pedro@codesourcery.com>
513 * infrun.c (normal_stop): Use has_stack_frames instead of
515 * mi/mi-main.c (mi_execute_command): Avoid calling inferior_thread
516 when there is no thread selected.
517 (mi_cmd_execute): Don't special case commands that can run without
518 a valid selected thread.
519 * top.c (execute_command): Don't special case commands that can
520 run without a valid selected thread. Use has_stack_frames.
521 * infcmd.c (ensure_valid_thread): New.
522 (continue_1, step_1, jump_command, signal_command): Use it.
523 (detach_command): Error out if there's no selected thread/inferior.
524 * thread.c (print_thread_info): Allow having no thread selected.
525 (switch_to_thread): Don't read the PC if there is no current thread.
526 (do_restore_current_thread_cleanup): Don't record the current
527 frame if there is no current thread.
528 (make_cleanup_restore_current_thread): Don't read frame info if
529 there is no selected thread.
530 (_initialize_thread): Don't mark commands as
531 "no_selected_thread_ok".
532 * frame.c (get_current_frame): Error out if there is no valid
534 (has_stack_frames): Return false if there is no valid
536 * cli/cli-cmds.c (init_cli_cmds): Don't mark commands as
537 "no_selected_thread_ok".
538 * cli/cli-decode.c (set_cmd_no_selected_thread_ok)
539 (get_cmd_no_selected_thread_ok): Delete.
540 * cli/cli-decode.h (CMD_NO_SELECTED_THREAD_OK): Delete.
541 (set_cmd_no_selected_thread_ok, get_cmd_no_selected_thread_ok):
543 * stack.c (get_selected_block): Use has_stack_frames.
545 2009-03-25 Thiago Jung Bauermann <bauerman@br.ibm.com>
547 Fix size of FPSCR in Power 7 processors.
548 * ppc-linux-nat.c (PPC_FEATURE_ARCH_2_05): Remove #define.
549 (PPC_FEATURE_HAS_DFP): New #define.
550 (ppc_linux_read_description): Check for DFP feature instead of
551 ISA 2.05 to decide on size of the FPSCR.
553 2009-03-25 Kevin Buettner <kevinb@redhat.com>
555 * mn10300-tdep.c (trad-frame.h): Don't include.
556 (prologue-value.h): Include.
557 (mn10300_frame_unwind_cache, set_reg_offsets): Delete.
558 (struct mn10300_prologue): Define.
559 (push_reg, translate_rreg, check_for_saved): New functions.
560 (mn10300_analyze_prologue): Rewrite, using prologue-value
561 machinery. Handle more instructions than before. Permit
562 instructions to occur in any order.
563 (mn10300_skip_prologue): Find the extents of the function
564 in question; mn10300_analyze_prologue no longer does this.
565 (mn10300_analyze_frame_prologue): New function.
566 (mn10300_frame_base): New function.
567 (mn10300_frame_this_id): Rewrite, no longer using trad-frame
569 (mn10300_frame_prev_register): Likewise.
570 (mn10300_frame_base_address, mn10300_frame_base struct): Delete.
571 (mn10300_unwind_pc, mn10300_unwind_sp): Rename `next_frame' to
573 (mn10300_frame_unwind_init): Don't call frame_base_set_default().
575 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
577 Fix completer problem for filename completion on the first try.
579 * gdb/completer.h (gdb_completion_word_break_characters): New function.
580 * gdb/completer.c: Include gdb_assert.h.
581 (complete_line_internal_reason): New enum.
582 (complete_line_internal): Change last argument type to
583 complete_line_internal_reason.
584 Modify function to handle the different complete_line_internal_reason
586 (complete_line): Adapt to change in complete_line_internal.
587 (command_completer): Ditto.
588 (gdb_completion_word_break_characters): Implement new function.
589 * top.c (init_main): Set rl_completion_word_break_hook to
590 gdb_completion_word_break_characters.
593 2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
595 ARI fix: "strlen d_name" rule.
596 * linux-nat.c (linux_nat_xfer_osdata): Use NAMELEN macro.
599 2009-03-24 Tom Tromey <tromey@redhat.com>
600 Pedro Alves <pedro@codesourcery.com>
602 * configure, config.in: Rebuild.
603 * configure.ac: Check for libiconvlist.
604 * charset.c: Check HAVE_LIBICONVLIST.
605 * acinclude.m4 (AM_ICONV): Don't subst LIBICONV, LIBICONV_INCLUDE,
606 LIBICONV_LIBDIR. Update CPPFLAGS and LIBS.
607 * Makefile.in (LIBICONV, LIBICONV_INCLUDE, LIBICONV_LIBDIR):
609 (INTERNAL_CFLAGS_BASE): Update.
610 (INTERNAL_LDFLAGS): Update.
613 2009-03-24 Jan Kratochvil <jan.kratochvil@redhat.com>
615 * configure.ac: Initialize the variable $PREFER_CURSES.
616 * configure: Regenerated.
618 2009-03-24 Jan Kratochvil <jan.kratochvil@redhat.com>
620 * configure.ac: Enable $PREFER_CURSES even with default $ENABLE_TUI.
621 * configure: Regenerated.
623 2009-03-24 Pierre Muller <muller@ics.u-strasbg.fr>
625 ARI fix: "strerror" rule.
626 * darwin-nat.c (darwin_ptrace): Use safe_strerror.
627 (darwin_stop_inferior, darwin_attach, darwin_detach): Ditto.
629 2009-03-23 Joel Brobecker <brobecker@adacore.com>
631 * ada-exp.y (get_symbol_field_type): Make sure to resolve typedefs
632 before looking up the fields inside our struct type.
634 2009-03-23 Joel Brobecker <brobecker@adacore.com>
636 * ada-lang.c (resolve_subexp) [UNOP_QUAL]: Resolve typedefs before
637 trying to resolve the type qualification.
639 2009-03-23 Joel Brobecker <brobecker@adacore.com>
641 * ada-lang.c (ada_evaluate_subexp) [UNOP_IN_RANGE]: make sure
642 we try to apply the attribute on the real type, rather than
643 its associated typedef.
645 2009-03-23 Joel Brobecker <brobecker@adacore.com>
647 * ada-lang.c (ada_evaluate_subexp) [OP_ATR_MODULUS]: Use check_typdef
648 to make sure we try to get the modulus of the actual type, not the
651 2009-03-23 Joel Brobecker <brobecker@adacore.com>
653 * ada-lang.c (ada_evaluate_subexp): [OP_ATR_FIRST, OP_ATR_LAST]
654 [OP_ATR_LENGTH]: When using the attribute on a type, make sure
655 to get the real type, not the associated typedef.
657 2009-03-23 Joel Brobecker <brobecker@adacore.com>
659 * ada-lang.c (ada_get_field_index): Add handling of the case
660 when TYPE is a typedef of a struct.
662 2009-03-23 Joel Brobecker <brobecker@adacore.com>
664 Add gdb_usleep as a portable version of usleep based on gdb_select.
665 * gdb_usleep.h, gdb_usleep.c: New files.
666 * Makefile.in (SFILES): Add gdb_usleep.c.
667 (HFILES_NO_SRCDIR): Add gdb_usleep.h.
668 (COMMON_OBS): Add gdb_usleep.o.
669 * ser-unix.c (hardwire_send_break): Replace call to gdb_select
670 by call to gdb_usleep.
672 2009-03-23 Joel Brobecker <brobecker@adacore.com>
674 * buildsym.c (end_symtab): If we ignore the subfiles, then
675 unlink the associated symtabs if they were already allocated.
677 2009-03-23 Jerome Guitton <guitton@adacore.com>
679 Provide a way to force building of GDB with libcurses.
680 * configure.ac: Add --with-curses.
681 * configure: Regenerated.
683 2009-03-23 Tom Tromey <tromey@redhat.com>
685 * dwarf2expr.c (execute_stack_op) <DW_OP_GNU_uninit>: Fix typo in
688 2009-03-23 Paul Pluzhnikov <ppluzhnikov@google.com>
690 * breakpoint.c (disable_breakpoints_in_unloaded_shlib): Use
691 solib_contains_address_p instead of searching.
693 2009-03-23 Tom Tromey <tromey@redhat.com>
695 * charset.c (ICONV_CONST) <PHONY_ICONV>: Define.
696 (iconv): Make 'inbuf' argument const.
697 (convert_between_encodings): Use ICONV_CONST.
698 (wchar_iterate): Likewise.
700 2009-03-22 Christopher Faylor <me+cygwin@cgf.cx>
702 * windows-nat.c (AdjustTokenPrivileges): Implement macro wraparound for
703 dynamically loaded function.
704 (LookupPrivilegeValueA): Ditto.
705 (OpenProcessToken): Ditto.
706 (AdjustTokenPrivileges): Rename and define placeholder for address of
707 dynamically loaded function.
708 (LookupPrivilegeValueA): Ditto.
709 (OpenProcessToken): Ditto.
710 (set_process_privilege): Remove check for loaded functions.
711 (bad_OpenProcessToken): Define.
712 (_initialize_loadable): Load token functions from advapi here, setting
713 OpenProcessToken function to a dummy static function which always return
714 error if OS doesn't support this functionality.
716 2009-03-22 Nicolas Roche <roche@adacore.com>
717 Christopher Faylor <me+cygwin@cgf.cx>
719 * win32-nat.c (ctrl_c_handler): New function.
720 (win32_wait): Register ctrl_c_handler as Ctrl-C handler if the inferior
721 is run in a separate console.
723 2009-03-22 Christopher Faylor <me+cygwin@cgf.cx>
725 * windows-nat.c (DebugActiveProcessStop): Implement macro wraparound
726 for dynamically loaded function.
727 (DebugBreakProcess): Ditto.
728 (DebugSetProcessKillOnExit): Ditto.
729 (EnumProcessModules): Ditto.
730 (GetModuleFileNameExA): Ditto.
731 (GetModuleInformation): Ditto.
732 (DebugActiveProcessStop): Rename and define placeholder for address of
733 dynamically loaded function.
734 (DebugBreakProcess): Ditto.
735 (DebugSetProcessKillOnExit): Ditto.
736 (EnumProcessModules): Ditto.
737 (GetModuleFileNameExA): Ditto.
738 (GetModuleInformation): Ditto.
739 (psapi_loaded): Delete.
740 (get_module_name): Don't check psapi_loaded, just rely on the fact that
741 dynamically loaded functions will return failure if they weren't
743 (has_detach_ability): Delete.
744 (windows_attach): Remove call to has_detach_ability (). Just rely on
745 functions being callable.
746 (bad_DebugActiveProcessStop): Define.
747 (bad_DebugBreakProcess): Ditto.
748 (bad_DebugSetProcessKillOnExit): Ditto.
749 (bad_EnumProcessModules): Ditto.
750 (bad_GetModuleFileNameExA): Ditto.
751 (bad_GetModuleInformation): Ditto.
752 (_initialize_loadable): Rename from _initialize_psapi. Initialize all
753 dynamic storage here, setting nonexistent functions to dummy static
754 functions which always return error.
756 2009-03-22 Pedro Alves <pedro@codesourcery.com>
758 * mi/mi-interp.c (mi_interpreter_init): Attach mi_about_to_proceed
759 to the about_to_proceed observer notification.
760 (mi_about_to_proceed): New.
761 (mi_on_resume): Only output ^running and the prompt here if the
762 target was proceeded.
763 * breakpoint.c (breakpoint_proceeded): New static.
764 (breakpoint_about_to_proceed): New.
765 (_initialize_breakpoints): Attach breakpoint_about_to_proceed to
766 the about_to_proceed observer notification.
767 * inferior.h (breakpoint_proceeded): Delete declaration.
768 * infrun.c (clear_proceed_status): Don't set breakpoint_proceeded.
769 Notify the about_to_proceed observers.
770 (struct inferior_status): Delete breakpoint_proceeded member.
771 (save_inferior_status): Don't save it.
772 (restore_inferior_status): Don't restore it.
773 * mi-main.h (mi_proceeded): Declare.
774 * mi/mi-main.c (mi_cmd_execute): Clear mi_proceeded before running
777 2009-03-22 Pedro Alves <pedro@codesourcery.com>
779 * gdbthread.h (struct thread_info): Add in_infcall member.
780 * infcall.c (run_inferior_call): Save, set and restore in_infcall.
781 Remove reverences to suppress_resume_observer. Refresh
782 `call_thread' after returning from `proceed'.
783 * infcmd.c (suppress_resume_observer): Delete.
784 * inferior.h (suppress_resume_observer): Delete declaration.
785 * mi/mi-interp.c (mi_on_resume): Suppress output while calling an
787 * thread.c (set_running): Remove references to
788 suppress_resume_observer.
789 * infrun.c (struct inferior_status): Add in_infcall member.
790 (save_inferior_status): Save it.
791 (restore_inferior_status): Restore it.
793 2009-03-22 Pedro Alves <pedro@codesourcery.com>
795 * infcall.c (run_inferior_call): Remove references to
796 suppress_stop_observer.
797 * infcmd.c (suppress_stop_observer): Delete.
798 (finish_command_continuation): Remove NOTE. Don't clear
799 suppress_stop_observer anymore.
800 (finish_command_continuation_free_arg): Likewise.
801 (finish_forward): Remove references to suppress_stop_observer.
802 Call normal_stop observer if we haven't already.
803 * inferior.h (suppress_stop_observer): Delete.
804 * infrun.c (normal_stop): When deciding to suppress the
805 normal_stop observer, check for proceed_to_finish instead of
806 suppress_stop_observer.
808 2009-03-22 Pedro Alves <pedro@codesourcery.com>
810 * symfile.c (symfile_relocate_debug_section): Remove check for
813 2009-03-21 Jan Kratochvil <jan.kratochvil@redhat.com>
814 Jim Blandy <jimb@red-bean.com>
815 Thiago Jung Bauermann <bauerman@br.ibm.com>
816 Tom Tromey <tromey@redhat.com>
818 Miscellaneous fixes to the Python code.
819 * python/python-cmd.c (cmdpy_init): Accept keyword
821 * python/python-value.c (valpy_string): Accept keyword
823 (valpy_binop): Use `break' to exit from the TRY_CATCH block.
824 Do not call value_to_value_object on NULL RES_VAL.
825 (value_object_methods): Change `string' entry to also accept
827 (convert_value_from_python): Return a copy of the value if obj is
829 (value_object_methods): Mark the `string' method as accepting
830 keywords, and show method "prototype" in the doc string.
831 * python/python.c (get_parameter): Don't return inside a
834 2009-03-20 Tom Tromey <tromey@redhat.com>
836 Add support for convenience functions in Python.
837 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-function.o.
838 (SUBDIR_PYTHON_SRCS): Add python-function.c.
839 (python-function.o): New target.
840 * eval.c: Include "python/python.h" and <ctype.h>.
841 (evaluate_subexp_standard): Handle values of type
842 TYPE_CODE_INTERNAL_FUNCTION.
843 * gdbtypes.h (type_code): Add TYPE_CODE_INTERNAL_FUNCTION.
844 * parse.c (write_exp_string): Remove duplicate word in comment.
845 * python/python-function.c: New file.
846 * python/python-internal.h (gdbpy_initialize_functions): Add
848 * python/python.c (_initialize_python): Call
849 gdbpy_initialize_functions.
850 * valprint.c (value_check_printable): Handle values of type
851 TYPE_CODE_INTERNAL_FUNCTION.
852 * value.c: Include "cli/cli-decode.h".
853 (internal_function): New struct.
854 (functionlist, internal_fn_type): New static variables.
855 (lookup_only_internalvar,
856 lookup_internalvar): Add const qualifier to name argument.
857 (create_internalvar): Likewise. Initialize new field.
858 (set_internal_var): Fix typo in comment. Don't allow assignment
859 to canonical variable.
860 (value_create_internal_function, value_internal_function_name,
861 call_internal_function, function_command, function_destroyer,
862 add_internal_function): New functions.
863 (_initialize_values): Create `function' placeholder command.
864 Initialize internal_fn_type.
865 * value.h (lookup_only_internalvar, create_internalvar,
866 lookup_internalvar): Add const qualifier to name argument.
867 (internal_function_fn, add_internal_function, call_internal_function,
868 value_internal_function_name): Add prototypes.
869 (struct internalvar) <canonical>: New field.
871 2009-03-20 Tom Tromey <tromey@redhat.com>
873 * c-lang.c (evaluate_subexp_c): Call check_typedef.
875 2009-03-20 Tom Tromey <tromey@redhat.com>
876 Julian Brown <julian@codesourcery.com>
878 PR i18n/7220, PR i18n/7821, PR exp/8815, PR exp/9103,
879 PR i18n/9401, PR exp/9613:
881 * value.h (value_typed_string): Declare.
882 (val_print_string): Update.
883 * valprint.h (print_char_chars): Update.
884 * valprint.c (print_char_chars): Add type argument. Update.
885 (val_print_string): Likewise.
886 * valops.c (value_typed_string): New function.
887 * utils.c (host_char_to_target): New function.
888 (parse_escape): Use host_char_to_target, host_hex_value. Update.
890 (no_control_char_error): Remove.
891 * typeprint.c (print_type_scalar): Update.
892 * scm-valprint.c (scm_scmval_print): Update.
893 * scm-lang.h (scm_printchar, scm_printstr): Update.
894 * scm-lang.c (scm_printchar): Add type argument.
895 (scm_printstr): Likewise.
896 * printcmd.c (print_formatted): Update.
897 (print_scalar_formatted): Update.
898 (printf_command) <wide_string_arg, wide_char_arg>: New constants.
899 Handle '%lc' and '%ls'.
900 * parser-defs.h (struct typed_stoken): New type.
901 (struct stoken_vector): Likewise.
902 (write_exp_string_vector): Declare.
903 * parse.c (write_exp_string_vector): New function.
904 * p-valprint.c (pascal_val_print): Update.
905 * p-lang.h (is_pascal_string_type, pascal_printchar,
906 pascal_printstr): Update.
907 * p-lang.c (is_pascal_string_type): Remove 'char_size' argument.
908 Add 'char_type' argument.
909 (pascal_emit_char): Add type argument.
910 (pascal_printchar): Likewise.
911 (pascal_printstr): Likewise.
912 * objc-lang.c (objc_emit_char): Add type argument.
913 (objc_printchar): Likewise.
914 (objc_printstr): Likewise.
915 * macroexp.c (get_character_constant): Handle unicode characters.
917 (get_string_literal): Handle unicode strings. Use
919 * m2-valprint.c (print_unpacked_pointer): Update.
920 (m2_print_array_contents): Update.
921 (m2_val_print): Update.
922 * m2-lang.c (m2_emit_char): Add type argument.
923 (m2_printchar): Likewise.
924 (m2_printstr): Likewise.
925 * language.h (struct language_defn) <la_printchar>: Add type
927 <la_printstr, la_emitchar>: Likewise.
928 (LA_PRINT_CHAR): Likewise.
929 (LA_PRINT_STRING): Likewise.
930 (LA_EMIT_CHAR): Likewise.
931 * language.c (unk_lang_emit_char): Add type argument.
932 (unk_lang_printchar): Likewise.
933 (unk_lang_printstr): Likewise.
934 * jv-valprint.c (java_val_print): Update.
935 * jv-lang.c (java_emit_char): Add type argument.
936 * f-valprint.c (f_val_print): Update.
937 * f-lang.c (f_emit_char): Add type argument.
938 (f_printchar): Likewise.
939 (f_printstr): Likewise.
940 * expprint.c (print_subexp_standard): Update.
941 * charset.h (target_wide_charset): Declare.
942 (c_target_char_has_backslash_escape, c_parse_backslash,
943 host_char_print_literally, host_char_to_target,
944 target_char_to_host, target_char_to_control_char): Remove.
945 (enum transliterations): New type.
946 (convert_between_encodings): Declare.
947 (HOST_ESCAPE_CHAR): New define.
948 (host_letter_to_control_character, host_hex_value): Declare.
949 (enum wchar_iterate_result): New enum.
950 (struct wchar_iterator): Declare.
951 (make_wchar_iterator, make_cleanup_wchar_iterator, wchar_iterator,
952 wchar_push_back): Declare.
953 * charset-list.h: New file.
954 * c-valprint.c (textual_name): New function.
955 (textual_element_type): Handle wide character types.
956 (c_val_print): Pass original type to textual_element_type. Handle
957 wide character types.
958 (c_value_print): Use textual_element_type. Pass original type of
960 * c-lang.h (enum c_string_type): New type.
961 (c_printchar, c_printstr): Update.
962 * c-lang.c (classify_type): New function.
963 (print_wchar): Likewise.
964 (c_emit_char): Add type argument. Handle wide characters.
965 (c_printchar): Likewise.
966 (c_printstr): Add type argument. Handle wide and multibyte
968 (convert_ucn): New function.
969 (emit_numeric_character): Likewise.
970 (convert_octal): Likewise.
971 (convert_hex): Likewise.
972 (ADVANCE): New macro.
973 (convert_escape): New function.
974 (parse_one_string): Likewise.
975 (evaluate_subexp_c): Likewise.
976 (exp_descriptor_c): New global.
977 (c_language_defn): Use exp_descriptor_c.
978 (cplus_language_defn): Likewise.
979 (asm_language_defn): Likewise.
980 (minimal_language_defn): Likewise.
981 (charset_for_string_type): New function.
982 * c-exp.y (%union): Add 'svec' and 'tsval'.
984 (exp): Add CHAR production.
985 (string_exp): Rewrite.
986 (exp) <string_exp>: Rewrite.
987 (tempbuf): Now global.
988 (tempbuf_init): New global.
989 (parse_string_or_char): New function.
990 (yylex) <tempbuf>: Now global.
991 <tokptr, tempbufindex, tempbufsize, token_string, class_prefix>:
993 Handle 'u', 'U', and 'L' prefixes. Call parse_string_or_char.
994 (c_parse_escape): New function.
995 * auxv.c (fprint_target_auxv): Update.
996 * ada-valprint.c (ada_emit_char): Add type argument.
997 (ada_printchar): Likewise.
998 (ada_print_scalar): Update.
999 (printstr): Add type argument. Update calls to ada_emit_char.
1000 (ada_printstr): Add type argument.
1001 (ada_val_print_array): Update.
1002 (ada_val_print_1): Likewise.
1003 * ada-lang.c (emit_char): Add type argument.
1004 * ada-lang.h (ada_emit_char, ada_printchar, ada_printstr): Add
1006 * gdb_locale.h: Include langinfo.h.
1007 * charset.c (_initialize_charset): Set default host charset from
1008 the locale. Don't register charsets. Add target-wide-charset
1009 commands. Call find_charset_names.
1010 (struct charset, struct translation): Remove.
1011 (GDB_DEFAULT_HOST_CHARSET): Remove.
1012 (GDB_DEFAULT_TARGET_WIDE_CHARSET): New define.
1013 (target_wide_charset_name): New global.
1014 (show_host_charset_name): Handle "auto".
1015 (show_target_wide_charset_name): New function.
1016 (host_charset_enum, target_charset_enum): Remove.
1017 (charset_enum): New global.
1018 (all_charsets, register_charset, lookup_charset, all_translations,
1019 register_translation, lookup_translation): Remove.
1020 (simple_charset, ascii_print_literally, ascii_to_control): Remove.
1021 (iso_8859_print_literally, iso_8859_to_control,
1022 iso_8859_family_charset): Remove.
1023 (ebcdic_print_literally, ebcdic_to_control,
1024 ebcdic_family_charset): Remove.
1025 (struct cached_iconv, check_iconv_cache, cached_iconv_convert,
1026 register_iconv_charsets): Remove.
1027 (target_wide_charset_be_name, target_wide_charset_le_name): New
1029 (identity_either_char_to_other): Remove.
1030 (set_be_le_names, validate): New functions.
1031 (backslashable, backslashed, represented): Remove.
1032 (default_c_target_char_has_backslash_escape): Remove.
1033 (default_c_parse_backslash, iconv_convert): Remove.
1034 (ascii_to_iso_8859_1_table, ascii_to_ebcdic_us_table,
1035 ascii_to_ibm1047_table, iso_8859_1_to_ascii_table,
1036 iso_8859_1_to_ebcdic_us_table, iso_8859_1_to_ibm1047_table,
1037 ebcdic_us_to_ascii_table, ebcdic_us_to_iso_8859_1_table,
1038 ebcdic_us_to_ibm1047_table, ibm1047_to_ascii_table,
1039 ibm1047_to_iso_8859_1_table, ibm1047_to_ebcdic_us_table): Remove.
1040 (table_convert_char, table_translation, simple_table_translation):
1042 (current_host_charset, current_target_charset,
1043 c_target_char_has_backslash_escape_func,
1044 c_target_char_has_backslash_escape_baton): Remove.
1045 (c_parse_backslash_func, c_parse_backslash_baton): Remove.
1046 (host_char_to_target_func, host_char_to_target_baton): Remove.
1047 (target_char_to_host_func, target_char_to_host_baton): Remove.
1048 (cached_iconv_host_to_target, cached_iconv_target_to_host):
1050 (lookup_charset_or_error, check_valid_host_charset): Remove.
1051 (set_host_and_target_charsets): Remove.
1052 (set_host_charset, set_target_charset): Remove.
1053 (set_host_charset_sfunc, set_target_charset_sfunc): Rewrite.
1054 (set_target_wide_charset_sfunc): New function.
1055 (show_charset): Print target wide character set.
1056 (host_charset, target_charset): Rewrite.
1057 (target_wide_charset): New function.
1058 (c_target_char_has_backslash_escape): Remove.
1059 (c_parse_backslash): Remove.
1060 (host_letter_to_control_character): New function.
1061 (host_char_print_literally): Remove.
1062 (host_hex_value): New function.
1063 (target_char_to_control_char): Remove.
1064 (cleanup_iconv): New function.
1065 (convert_between_encodings): New function.
1066 (target_char_to_host): Remove.
1067 (struct wchar_iterator): Define.
1068 (make_wchar_iterator, make_cleanup_wchar_iterator, wchar_iterator,
1069 wchar_push_back): New functions.
1070 (do_cleanup_iterator): New function.
1071 (char_ptr): New typedef.
1072 (charsets): New global.
1073 (add_one, find_charset_names): New functions.
1074 (default_charset_names): New global.
1075 (auto_host_charset_name): Likewise.
1076 * aclocal.m4, config.in, configure: Rebuild.
1077 * configure.ac: Call AM_LANGINFO_CODESET.
1078 (GDB_DEFAULT_HOST_CHARSET): Default to UTF-8.
1079 (AM_ICONV): Invoke earlier.
1080 * acinclude.m4: Include codeset.m4. Subst LIBICONV_INCLUDE and
1081 LIBICONV_LIBDIR. Check for libiconv in build tree.
1082 * Makefile.in (LIBICONV_LIBDIR, LIBICONV_INCLUDE): New macros.
1083 (INTERNAL_CFLAGS_BASE): Add LIBICONV_INCLUDE.
1084 (INTERNAL_LDFLAGS): Add LIBICONV_LIBDIR.
1085 * gdb_obstack.h (obstack_grow_wstr): New define.
1086 * gdb_wchar.h: New file.
1087 * defs.h: Include it.
1089 2009-03-20 Tom Tromey <tromey@redhat.com>
1090 Jan Kratochvil <jan.kratochvil@redhat.com>
1092 * dwarf2read.c (process_die): Handle DW_TAG_typedef.
1093 * eval.c (evaluate_subexp_standard) <OP_TYPE>: Strip a single
1095 * ada-lang.c (decode_packed_array_type): Call CHECK_TYPEDEF on the
1097 * ada-typeprint.c (print_array_type): Do the NULL check
1100 2009-03-19 Tom Tromey <tromey@redhat.com>
1102 * utils.c (do_obstack_free): New function.
1103 (make_cleanup_obstack_free): Likewise.
1104 * defs.h (make_cleanup_obstack_free): Declare.
1106 2009-03-18 Doug Evans <dje@google.com>
1108 * linux-nat.c (linux_nat_find_memory_regions): Result of PIDGET is an
1109 int, not a long long.
1110 (linux_nat_info_proc_cmd): Store pid in long instead of long long.
1112 * expprint.c (dump_raw_expression): Print note if non-NULL.
1114 * printcmd.c (display_uses_solib_p): Redo loop, scan element list
1117 2009-03-18 Nathan Sidwell <nathan@codesourcery.com>
1119 * Makefile.in: Update license to GPLv3.
1120 * ada-exp.y: Update license to GPLv3.
1121 * ada-lex.l: Update license to GPLv3.
1122 * c-exp.y: Update license to GPLv3.
1123 * cp-name-parser.y: Update license to GPLv3.
1124 * darwin-nat-info.c: Update license to GPLv3.
1125 * f-exp.y: Update license to GPLv3.
1126 * gdb_thread_db.h: Update license to GPLv3.
1127 * hppanbsd-nat.c: Update license to GPLv3.
1128 * hppanbsd-tdep.c: Update license to GPLv3.
1129 * hppaobsd-tdep.c: Update license to GPLv3.
1130 * jv-exp.y: Update license to GPLv3.
1131 * m2-exp.y: Update license to GPLv3.
1132 * objc-exp.y: Update license to GPLv3.
1133 * p-exp.y: Update license to GPLv3.
1134 * reply_mig_hack.awk: Update license to GPLv3.
1135 * reverse.c: Update license to GPLv3.
1136 * xtensa-xtregs.c: Update license to GPLv3.
1138 2009-03-18 Pedro Alves <pedro@codesourcery.com>
1140 * remote.c (remote_close): Don't call generic_mourn_inferior.
1141 (remote_mourn_1): Call generic_mourn_inferior after closing the
1144 2009-03-18 Pedro Alves <pedro@codesourcery.com>
1146 * remote.c (remote_start_remote): Add missing call to
1147 init_wait_for_inferior in non-stop mode.
1149 2009-03-18 Pedro Alves <pedro@codesourcery.com>
1151 * breakpoint.c (bpstat_should_step): Only consider software
1152 watchpoints that have a location.
1154 2009-03-17 Joel Brobecker <brobecker@adacore.com>
1156 Add a target_ops parameter to the to_kill method in struct target_ops.
1158 * target.h (struct target_ops): Add a "target_ops *" parameter to
1160 (target_kill): Remove macro. Add declaration.
1161 * target.c (debug_to_kill): Delete, no longer necessary.
1162 (target_kill): New function.
1163 (update_current_target): Stop inheriting the to_kill method.
1164 Do not de_fault it to no_process either.
1165 (setup_target_debug): Do not set current_target.to_kill.
1166 * gnu-nat.c, go32-nat.c, hpux-thread.c, inf-ptrace.c, inf-ttrace.c,
1167 linux-nat.c, monitor.c, nto-procfs.c, procfs.c, remote-m32r-sdi.c,
1168 remote-mips.c, remote-sim.c, remote.c, windows-nat.c: Update
1171 2009-03-17 Doug Evans <dje@google.com>
1173 * amd64-linux-nat.c (si_timerid,si_overrun): Provide definition for
1174 glibc 2.3.2 and earlier.
1176 2009-03-17 Joel Brobecker <brobecker@adacore.com>
1178 * frame.c (get_prev_frame_1): Do not perform the inner_frame
1179 sanity check if this_frame is not NORMAL.
1180 (frame_id_inner): Update the description of this function.
1182 2009-03-17 Hui Zhu <teawater@gmail.com>
1184 * stack.c: Change the introduce of "disassemble-next-line".
1186 2009-03-17 Pedro Alves <pedro@codesourcery.com>
1188 * mi/mi-main.h (mi_print_timing_maybe): Add strict prototype,
1191 2009-03-17 Hui Zhu <teawater@gmail.com>
1193 * stack.c: Include valprint.h.
1194 (disassemble_next_line): New enum.
1195 (show_disassemble_next_line): New function. Show the current
1196 value of disassemble-next-line.
1197 (gdb_disassembly_stub_args): New struct for argument passing
1198 between function do_gdb_disassembly and function
1199 gdb_disassembly_stub.
1200 (gdb_disassembly_stub): New function. Helper for
1202 (do_gdb_disassembly): New function. Use TRY_CATCH to catch
1203 the exception from the gdb_disassembly because it will be
1204 broken by filter sometime.
1205 (print_frame_info): If disassemble-next-line is set to auto
1206 or on and doesn't have the line debug messages for $pc,
1207 output the next instruction.
1208 If disassemble-next-line is set to on and there is line debug
1209 messages, output assembly codes for next line.
1210 (_initialize_stack): Make the "set disassemble-next-line"
1211 command an auto-boolean command. Change its class to
1212 class_stack. Place it in the top level set list. Extend help
1213 to describe the auto mode.
1215 2009-03-17 Pedro Alves <pedro@codesourcery.com>
1217 * infrun.c (normal_stop): Don't overwrite old_chain.
1219 2009-03-16 Joel Brobecker <brobecker@adacore.com>
1221 * remote-mips.c (mips_load): Replace call to regcache_set_valid_p,
1222 which is undefined, by call to regcache_invalidate, which should
1223 do what the original author wanted to do.
1225 2009-03-16 Joel Brobecker <brobecker@adacore.com>
1227 * remote-mips.c (mips_mourn_inferior): Add missing ops parameter.
1228 (mips_create_inferior): Likewise.
1230 2009-03-16 Joel Brobecker <brobecker@adacore.com>
1232 * go32-nat.c (go32_create_inferior): Add missing ops parameter.
1234 2009-03-16 Joel Brobecker <brobecker@adacore.com>
1236 * darwin-nat.c (darwin_resume): Fix a compiler warning when
1237 building on x86_64-darwin.
1239 2009-03-16 Tristan Gingold <gingold@adacore.com>
1241 * configure.tgt: Add handling for x86_64-darwin.
1243 2009-03-16 Jan Kratochvil <jan.kratochvil@redhat.com>
1245 * auxv.c (fprint_target_auxv): New TAG for AT_RANDOM.
1247 2009-03-15 Joel Brobecker <brobecker@adacore.com>
1249 * aix-thread.c (aix_thread_thread_alive, aix_thread_pid_to_str):
1250 Use the ops parameter to get to the target beneath, rather than
1251 using the current_target global. Using the current_target global
1252 was an unintended accident.
1254 2009-03-15 Joel Brobecker <brobecker@adacore.com>
1256 Fix an error happening while loading symbols from a core file
1259 * rs6000-nat.c (xcoff_relocate_symtab): Use target_has_execution
1260 to detect whether we're debugging a core file or not.
1262 2009-03-15 Joel Brobecker <brobecker@adacore.com>
1264 Modernize the aix-thread later by getting rid of the base_target
1265 global. This brings back to life the AIX port which was otherwise
1266 crashing all the time.
1268 * aix-thread.c (base_target): Delete.
1269 (pd_enable): Do not set base_target.
1270 (aix_thread_attach): Use find_target_beneath instead of base_target.
1271 (aix_thread_detach, aix_thread_resume, aix_thread_wait)
1272 (aix_thread_fetch_registers, aix_thread_store_registers),
1273 (aix_thread_xfer_partial, aix_thread_mourn_inferior)
1274 (aix_thread_thread_alive, aix_thread_pid_to_str): Likewise.
1275 (aix_thread_kill): Delete. Does not seem necessary.
1276 (init_aix_thread_ops): Do not set aix_thread_ops.to_kill.
1278 2009-03-15 Jan Kratochvil <jan.kratochvil@redhat.com>
1280 * stack.c (return_command <retval_exp>): New variables retval_expr
1281 and old_chain. Inline parse_and_eval to initialize retval_expr. Check
1282 RETVAL_EXPR for UNOP_CAST and set RETURN_TYPE to the RETURN_VALUE type
1283 if RETURN_TYPE is NULL.
1285 2009-03-14 Pedro Alves <pedro@codesourcery.com>
1287 * remote.c (PACKET_qAttached): New.
1288 (remote_query_attached): New.
1289 (remote_add_inferior): Add new `attached' argument. Handle it.
1290 (remote_notice_new_inferior, remote_start_remote): Adjust to pass
1291 -1 to remote_add_inferior in new parameter.
1292 (extended_remote_attach_1): Adjust to pass 1 to
1293 remote_add_inferior in the new parameter.
1294 (extended_remote_create_inferior_1): Adjust to pass 0 to
1295 remote_add_inferior in the new parameter.
1296 (_initialize_remote): Add "set/show remote query-attached-packet"
1299 2009-03-13 Tom Tromey <tromey@redhat.com>
1301 * symtab.c (lookup_symbol_in_language): Use a cleanup.
1303 2009-03-13 Doug Evans <dje@google.com>
1305 * exceptions.h: Clean up some comments on catch_exceptions usage.
1306 * exceptions.c: Ditto. Plus mark catch_errors as superseded by
1309 2009-02-17 Joel Brobecker <brobecker@adacore.com>
1311 The following patch helps getting rid of a warning inside solib-som.c.
1313 * source.c (source_full_path_of): Constify parameter filename.
1314 * defs.h (source_full_path_of): Update declaration accordingly.
1316 2009-03-12 Joel Brobecker <brobecker@adacore.com>
1318 * ada-lang.c (ada_evaluate_subexp): Merge case BINOP_REM and
1319 BINOP_MOD cases with the handling of case BINOP_DIV and BINOP_MUL.
1320 Remove useless op value checks when EVAL_AVOID_SIDE_EFFECTS.
1322 2009-03-12 Joel Brobecker <brobecker@adacore.com>
1324 * ada-lang.c (ada_evaluate_subexp) <BINOP_DIV>: make sure to
1325 promote the operands when noside is EVAL_AVOID_SIDE_EFFECTS.
1327 2009-03-12 Joel Brobecker <brobecker@adacore.com>
1329 * ada-tasks.c (ada_task_is_alive): Move up and make static.
1330 * ada-lang.h (ada_task_is_alive): Remove declaration.
1332 2009-03-12 Jerome Guitton <guitton@adacore.com>
1334 * ada-lang.c (ada_delta): Change the type of numerators and
1335 denominators to DOUBLEST, as they may not fit into a long.
1336 (scaling_factor): Ditto.
1338 2009-03-12 Jerome Guitton <guitton@adacore.com>
1340 * language.c (lang_bool_type): Set lai->bool_type_symbol to NULL.
1342 2009-03-12 Joel Brobecker <brobecker@adacore.com>
1344 * ada-lang.c (ada_evaluate_subexp) [OP_VAR_VALUE]: For tagged
1345 types, if we are unable to determine the actual symbol type
1346 from its tag, then use the static approximation instead.
1348 2009-03-12 Joel Brobecker <brobecker@adacore.com>
1350 Fix crash printing packed record with packed array.
1352 * ada-lang.c (ada_modulus_from_name): New function.
1353 (ada_modulus): In the case where the type length is bigger than
1354 the size of the type used to hold the bounds, try determining
1355 the modulus from the type name.
1356 (ada_value_primitive_packed_val): Fix bug in the computation of
1357 ntarg causing an out-of-buffer invalid access.
1359 2009-03-12 Joel Brobecker <brobecker@adacore.com>
1361 Fix segfault when printing short_integer'last.
1363 * ada-lang.c (ada_find_any_type): Search in the primitive types
1364 if a symbol could not be found.
1366 2009-03-12 Joel Brobecker <brobecker@adacore.com>
1368 * ada-tasks.c (task_states,long_task_states): Add new states
1369 Activating and Acceptor_Delay_Sleep. Update the description
1370 of state Acceptor_Sleep.
1372 2009-03-12 Jonas Maebe <jonas.maebe@elis.ugent.be> (obvious change)
1374 Fix a build failure on Darwin following some changes in
1375 the profile of some target_ops methods.
1377 * darwin-nat.c (darwin_kill_inferior): Add target_ops parameter
1379 (darwin_stop_inferior, darwin_detach): Likewise.
1381 2009-03-12 Vladimir Prus <vladimir@codesourcery.com>
1383 Include token in ^running notification for CLI commands.
1385 * mi/mi-main.c (mi_execute_command): Set current_token here.
1386 (mi_cmd_execute): Do not set current_token here.
1388 2009-03-12 Vladimir Prus <vladimir@codesourcery.com>
1392 * mi/mi-main.c (mi_print_timing_maybe): New.
1393 (captured_mi_execute_command): Simplify. Output timings to
1395 (mi_execute_async_cli_command): Do not print timings.
1396 * mi/mi-main.h (mi_print_timing_maybe): Declare.
1397 * mi/mi-interp.c (mi_on_normal_stop): Call mi_print_timing_maybe.
1399 2009-03-12 Jerome Guitton <guitton@adacore.com>
1401 * xcoffread.c (process_linenos): Check if the line in the
1402 include table refers to the main source file and, if so,
1403 add them to the main subfile.
1405 2009-03-12 Joel Brobecker <brobecker@adacore.com>
1407 Fix a build failure on AIX introduced after a change in the profile
1408 of some of the "methods" in the target_ops structure.
1409 * aix-thread.c: Add missing target_ops parameter throughout.
1411 Implement Ada task switching on AIX.
1412 * aix-thread.c (aix_thread_get_ada_task_ptid): New function.
1413 (init_aix_thread_ops): Set aix_thread_ops.to_get_ada_task_ptid.
1415 2009-03-11 Daniel Jacobowitz <dan@codesourcery.com>
1417 * breakpoint.c (bpstat_check_breakpoint_conditions): Use
1418 value_mark and value_free_to_mark.
1419 * objfiles.c (free_objfile): Call objfile_free_data before
1422 2009-03-10 Hui Zhu <teawater@gmail.com>
1424 * disasm.c (gdb_disassembly): Remove unused argument
1426 * disasm.h (gdb_disassembly): Ditto.
1427 * cli/cli-cmds.c (print_disassembly): Ditto.
1428 * mi/mi-cmd-disas.c (mi_cmd_disassemble): Ditto.
1430 2009-03-09 Paul Pluzhnikov <ppluzhnikov@google.com>
1432 * solib.c (solib_contains_address_p): New function.
1433 (solib_name_from_address): Use it.
1434 * printcmd.c (display_uses_solib_p): Use it.
1435 * solib.h (solib_contains_address_p): Declare it.
1437 2009-03-09 Jan Kratochvil <jan.kratochvil@redhat.com>
1439 * varobj.c (free_variable): Call value_free.
1441 2009-03-09 Jan Kratochvil <jan.kratochvil@redhat.com>
1444 * dwarf2read.c (dwarf_decode_macros): New variable `at_commandline'.
1445 Move the variable `macinfo_type' out of the loop. Create a new
1446 processing pass before the current one to pre-create `current_file'.
1447 New complaint on misplaced zero/non-zero definitions/includes.
1448 Skip first DW_MACINFO_start_file with `at_commandline' set.
1450 2008-03-09 Vladimir Prus <vladimir@codesourcery.com>
1452 * solib.c (reload_shared_libraries): Give
1453 inferior a chance to reset solib breakpoint.
1456 2009-03-08 Christopher Faylor <me+cygwin@cgf.cx>
1458 * windows-nat.c (dr): Redefine to use largest possible integer which
1460 (cygwin_set_dr): Avoid coercion.
1462 2009-03-08 Oswald Buddenhagen <oswald.buddenhagen@trolltech.de>
1464 * windows-nat.c (windows_create_inferior): Implement --tty handling on
1467 2009-03-06 Paul Pluzhnikov <ppluzhnikov@google.com>
1469 Rename solib_address to solib_name_from_address.
1470 * breakpoint.c (insert_bp_location, disable_breakpoints_in_shlibs)
1471 (disable_breakpoints_in_unloaded_shlib): Update.
1472 * printcmd.c (display_uses_solib_p): Likewise.
1473 * stack.c (print_frame): Likewise.
1477 2009-03-05 Paul Pluzhnikov <ppluzhnikov@google.com>
1479 * printcmd.c (do_one_display): Reparse exp_string.
1480 (display_uses_solib_p): New function.
1481 (clear_dangling_display_expressions): New function.
1482 (_initialize_printcmd): Add observer.
1483 * solib.c (no_shared_libraries): Swap order of calls to
1484 clear_solib and objfile_purge_solibs.
1486 2009-03-05 Joel Brobecker <brobecker@adacore.com>
1488 Implement the target-specific part of Ada tasking support
1491 * dec-thread.c (dec_thread_get_ada_task_ptid): New function.
1492 (init_dec_thread_ops): Set the to_get_ada_task_ptid method.
1494 2009-03-05 Joel Brobecker <brobecker@adacore.com>
1496 Get rid of the global "base_target" and use "find_target_beneath"
1497 to find the underlying target.
1498 * dec-thread.c (base_target): Delete.
1499 (enable_dec_thread): Remove assignement to base_target.
1500 (dec_thread_detach, dec_thread_wait, dec_thread_wait)
1501 (dec_thread_fetch_registers, dec_thread_store_registers)
1502 (dec_thread_mourn_inferior, dec_thread_pid_to_str):
1503 Update the function profile if necessary.
1504 Use find_target_beneath to call the same method but from
1505 the underlying target, removing the need for "base_target".
1507 * dec-thread.c (dec_thread_get_regsets, dec_thread_set_regsets):
1508 Fix a copy/paste error in a few debug traces...
1510 * solib-osf.c (init_so): Use a simpler method for computing
1511 the size of lm_info structure. This also gets rid of warning
1512 emitted by the compiler.
1514 2009-03-05 Pedro Alves <pedro@codesourcery.com>
1516 * breakpoint.c (check_duplicates_for): Skip permanent breakpoints
1517 duplicates of permanent breakpoints.
1519 2009-03-04 Pedro Alves <pedro@codesourcery.com>
1521 * inferior.h (notice_new_inferior): Declare.
1522 * infcmd.c (notice_new_inferior): New.
1523 * remote.c (remote_add_inferior, remote_add_thread): New.
1524 (notice_new_inferiors): Rename to...
1525 (remote_notice_new_inferior): ... this. Add RUNNING argument.
1526 Use remote_add_thread instead of add_thread, passing it the
1527 RUNNING argument. Add an inferior with remote_add_inferior. If
1528 we just learned about an inferior, call notice_new_inferior.
1529 (record_currthread): Adjust.
1530 (remote_threads_info): Adjust to use remote_notice_new_inferior.
1531 (remote_start_remote, extended_remote_attach_1): Use
1532 remote_add_inferior.
1533 (process_stop_reply): Adjust. Call remote_notice_new_inferior
1534 after handling expedited registers and watchpoint state.
1535 (extended_remote_create_inferior_1): Use remote_add_inferior.
1537 2009-03-04 Aleksandar Ristovski <aristovski@qnx.com>
1539 * infcmd.c (registers_info): Remove register number case.
1541 2009-03-03 Pedro Alves <pedro@codesourcery.com>
1543 * top.c (quit_target): Check for target_has_execution before
1544 killing or detaching from inferiors.
1546 2009-03-02 Joel Brobecker <brobecker@adacore.com>
1548 Remove some unused routines.
1550 * ada-lang.c (is_suppressed_name, ada_suppress_symbol_printing):
1552 * ada-lang.c (ada_task_list_iterator_ftype)
1553 (iterate_over_live_ada_tasks): Delete.
1554 * ada-tasks.c (ada_get_environment_task, iterate_over_live_ada_tasks):
1557 2009-03-01 Doug Evans <dje@google.com>
1559 * symtab.c: Remove trailing whitespace throughout the file.
1560 (expand_line_sal): Fix some typos and whitespace.
1562 * Makefile.in (clean): rm -f $(DEPDIR)/*.
1564 * Makefile.in (GDB_CFLAGS): Add -I$(srcdir)/common.
1565 (init.c): signals/ -> common/.
1566 (signals.o): Update.
1567 * target.h (target_signal_to_string,target_signal_to_string)
1568 (target_signal_from_name,target_signal_to_host_p)
1569 (target_signal_from_host,target_signal_to_host): Move to ...
1570 * common/gdb_signals.h: ... here. New file.
1571 * common/signals.c: Moved here from signals/signals.c.
1572 #include gdb_signals.h, remove #include of target.h in gdb case.
1573 (target_signal_from_command,default_target_signal_to_host)
1574 (default_target_signal_from_host): Move inside #ifndef GDBSERVER.
1576 Include thread ID in target_wait debugging output.
1577 * infrun.c (print_target_wait_results): New function.
1578 (wait_for_inferior,fetch_inferior_event): Call it.
1580 2009-02-27 Pedro Alves <pedro@codesourcery.com>
1582 * gdb_proc_service.h (struct ps_prochandle): Replace pid_t field
1583 with a ptid_t field.
1584 * linux-thread-db.c (thread_get_info_callback): Build the ptid
1585 using the pid stored in proc_handle.ptid.
1586 (thread_from_lwp, thread_db_attach_lwp, enable_thread_event)
1587 (check_for_thread_db, thread_db_detach, check_event)
1588 (thread_db_mourn_inferior, find_new_threads_callback)
1589 (thread_db_find_new_threads_1): Adjust.
1590 * proc-service.c (ps_xfer_memory, ps_lgetregs, ps_lsetregs)
1591 (ps_lgetfpregs, ps_lsetfpregs, ps_getpid): Adjust.
1593 2009-02-27 Phil Muldoon <pmuldoon@redhat.com>
1595 * valprint.c (read_string): Rework clean-up logic. Use
1596 free_current_contents to clean-up buffer.
1598 2009-02-27 Andreas Schwab <schwab@linux-m68k.org>
1600 * MAINTAINERS: Update e-mail address.
1602 2009-02-26 Phil Muldoon <pmuldoon@redhat.com>
1604 * python/python-utils.c (python_string_to_unicode): Always return
1606 (python_string_to_target_string): Decrement transient python
1608 (python_string_to_host_string): Likewise.
1610 2007-02-26 Pedro Alves <pedro@codesourcery.com>
1612 * mips-linux-nat.c (mips64_linux_fetch_registers): Pass `ops' to
1613 call to super_fetch_registers.
1614 (mips64_linux_store_registers): Pass `ops' to call to
1615 super_store_registers.
1617 2009-02-25 Doug Evans <dje@google.com>
1619 * breakpoint.c (insert_bp_location): Add \n to overlay breakpoint
1622 * breakpoint.c (disable_breakpoints_in_shlibs): Delete local
1623 disabled_shlib_breaks, unused.
1625 * printcmd.c (build_address_symbolic): Fix comment.
1627 2009-02-25 Hui Zhu <teawater@gmail.com>
1629 * cli/cli-script.c (define_command): Add _() to query.
1630 * gnu-nat.c (inf_validate_task_sc): Ditto.
1631 * infcmd.c (kill_if_already_running): Ditto.
1632 (jump_command): Ditto.
1633 (attach_command): Ditto.
1634 * inflow.c (kill_command): Ditto.
1635 * infrun.c (handle_command): Ditto.
1636 * maint.c (maintenance_dump_me): Ditto.
1637 * memattr.c (mem_delete_command): Ditto.
1638 * monitor.c (monitor_interrupt_query): Ditto.
1639 * nto-procfs.c (interrupt_query): Ditto.
1640 * printcmd.c (undisplay_command): Ditto.
1641 * remote-mips.c (mips_kill): Ditto.
1642 * remote.c (interrupt_query): Ditto.
1643 * solib-irix.c (irix_open_symbol_file_object): Ditto.
1644 * solib-osf.c (osf_open_symbol_file_object): Ditto.
1645 * solib-pa64.c (pa64_open_symbol_file_object): Ditto.
1646 * solib-som.c (som_open_symbol_file_object): Ditto.
1647 * solib-svr4.c (open_symbol_file_object): Ditto.
1648 * symfile.c (symbol_file_add_with_addrs_or_offsets): Ditto.
1649 * target.c (kill_or_be_killed): Ditto.
1650 * tracepoint.c (delete_trace_command): Ditto.
1651 * top.c (quit_confirm): Add _() to s that will be used
1654 2009-02-24 Pierre Muller <muller@ics.u-strasbg.fr>
1656 Fix windows-nat.c compilation failure.
1658 * windows-nat.c (windows_thread_alive): Fix forward declaration.
1659 (get_windows_debug_event): Add ops parameter to call to windows_resume.
1661 2009-02-23 Pedro Alves <pedro@codesourcery.com>
1663 * remote-sim.c (gdbsim_resume): Add target_ops* argument.
1665 2009-02-23 Jay Krell <jay.krell@cornell.edu> (tiny change)
1667 * symtab.c (find_line_symtab): Initialize exact to avoid
1670 2009-02-23 Pedro Alves <pedro@codesourcery.com>
1672 * i386-linux-nat.c (i386_linux_fetch_inferior_registers): Pass
1673 `ops' to recursive call.
1675 2009-02-23 Pedro Alves <pedro@codesourcery.com>
1677 * corelow.c (get_core_registers): Adjust.
1678 (core_file_thread_alive): Rename to...
1679 (core_thread_alive): ... this.
1680 (core_pid_to_str): Try gdbarch_core_pid_to_str first.
1681 (init_core_ops): Adjust.
1682 (coreops_suppress_target): Delete.
1683 (_initialize_corelow): Unconditionally add core_ops.
1684 * procfs.c: Include "inf-child.h".
1685 (procfs_ops): Delete.
1686 (init_procfs_ops): Delete. Reimplement as...
1687 (procfs_target): ... this, inheriting from inf-child.
1688 (procfs_attach, procfs_detach, procfs_fetch_registers): Adjust.
1689 (procfs_prepare_to_store): Delete.
1690 (procfs_store_registers, procfs_resume): Adjust.
1691 (procfs_open): Delete.
1692 (procfs_suppress_run): Delete.
1693 (procfs_can_run): Delete.
1694 (procfs_mourn_inferior): Adjust.
1695 (procfs_init_inferior): Add target_ops parameter. Adjust.
1696 (procfs_create_inferior): Don't pass procfs_init_inferior to
1697 fork_inferior. Instead call it after fork_inferior returns.
1698 (procfs_find_new_threads): Adjust.
1699 (_initialize_procfs): Adjust to use procfs_target instead of
1701 * sol-thread.c (orig_core_ops, sol_core_ops): Delete.
1702 (lwp_to_thread): Use target_thread_alive.
1703 (sol_thread_open): Delete.
1704 (sol_thread_attach): Delete.
1705 (sol_thread_detach, sol_thread_resume, sol_thread_wait)
1706 (sol_thread_fetch_registers, sol_thread_store_registers): Adjust
1707 to use find_target_beneath.
1708 (sol_thread_prepare_to_store, sol_thread_xfer_memory): Delete.
1709 (sol_thread_xfer_partial): Adjust to use find_target_beneath.
1710 (sol_thread_files_info, sol_thread_kill_inferior): Delete.
1711 (check_for_thread_db): New.
1712 (sol_thread_notice_signals, sol_thread_create_inferior): Delete.
1713 (sol_thread_new_objfile): Call check_for_thread_db.
1714 (sol_thread_mourn_inferior): Adjust to use find_target_beneath.
1715 (sol_thread_can_run): Delete.
1716 (sol_thread_alive): Adjust to use find_target_beneath.
1717 (sol_thread_stop): Delete.
1718 (rw_common): Use target_write_memory or target_read_memory.
1719 (ps_lgetregs, ps_lgetfpregs): Use target_fetch_registers.
1720 (ps_lsetregs, ps_lsetfpregs): Use target_store_registers.
1721 (solaris_pid_to_str): Remove check for libthread_db initialization
1723 (sol_find_new_threads): Remove check for libthread_db
1724 initialization failing, or for an invalid inferior_ptid. Adjust
1725 to use find_target_beneath.
1726 (sol_core_open, sol_core_close, sol_core_detach,
1727 sol_core_files_info, sol_find_memory_regions,
1728 sol_make_note_section, ignore): Delete.
1729 (init_sol_thread_ops): Make it a thread_stratum target. Remove
1730 unneeded callback settings.
1731 (init_sol_core_ops): Delete.
1732 (_initialize_sol_thread): No longer call init_sol_core_ops, set
1733 procfs_suppress_run, or hack with core_ops.
1735 * target.h (struct target_ops): Add a target_ops * parameter to
1736 to_resume, to_fetch_registers, to_store_registers, to_thread_alive
1737 and to_find_new_threads.
1738 (target_fetch_registers, target_store_registers)
1739 (target_thread_alive, target_find_new_threads): Redeclare as
1742 * target.c (update_current_target): Do not inherit or de_fault
1743 to_resume, to_fetch_registers, to_store_registers,
1744 to_thread_alive, to_find_new_threads.
1745 (target_resume): Adjust.
1746 (target_thread_alive, target_find_new_threads): New.
1747 (debug_to_resume, debug_to_fetch_registers): Delete.
1748 (target_fetch_registers): New.
1749 (debug_to_store_registers): Delete.
1750 (target_store_registers): New.
1751 (debug_to_thread_alive, debug_to_find_new_threads): Delete.
1752 (setup_target_debug): Adjust.
1754 * gdbcore.h (core_ops): Delete declaration.
1756 * inf-ptrace.c, linux-nat.c, remote.c, amd64-linux-nat.c,
1757 inf-child.c, linux-thread-db.c, bsd-uthread.c, inf-ttrace.c,
1758 i386-sol2-tdep.c, darwin-nat.c, gnu-nat.c, go32-nat.c,
1759 hpux-thread.c, i386-linux-nat.c, i386fbsd-nat.c, monitor.c,
1760 nto-procfs.c, remote-m32r-sdi.c, remote-mips.c, windows-nat.c,
1761 alphabsd-nat.c, amd64bsd-nat.c, arm-linux-nat.c, armnbsd-nat.c,
1762 bsd-kvm.c, hppa-hpux-nat.c, hppa-linux-nat.c, hppabsd-nat.c,
1763 hppanbsd-nat.c, i386-darwin-nat.c, i386bsd-nat.c,
1764 ia64-linux-nat.c, m32r-linux-nat.c, m68kbsd-nat.c,
1765 m68klinux-nat.c, m88kbsd-nat.c, mips-linux-nat.c,
1766 mips64obsd-nat.c, mipsnbsd-nat.c, ppc-linux-nat.c, ppcnbsd-nat.c,
1767 ppcobsd-nat.c, remote-sim.c, rs6000-nat.c, s390-nat.c,
1768 shnbsd-nat.c, sparc-nat.c, sparc-nat.h, spu-linux-nat.c,
1769 vaxbsd-nat.c, xtensa-linux-nat.c: Adjust to target_ops changes.
1771 * gdbarch.sh (core_pid_to_str): New gdbarch callback.
1772 * gdbarch.h, gdbarch.c: Regenerate.
1774 * sol2-tdep.c: Include "inferior.h".
1775 (sol2_core_pid_to_str): New.
1776 * sol2-tdep.h (sol2_core_pid_to_str): Declare.
1778 * amd64-sol2-tdep.c (amd64_sol2_init_abi): Set it.
1779 * sparc-sol2-tdep.c (sparc32_sol2_init_abi): Set it.
1780 * sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Set it.
1781 * i386-sol2-tdep.c (i386_sol2_init_abi): Set it.
1783 2009-02-22 Doug Evans <dje@google.com>
1785 * exec.c (exec_file_attach): Fix comment.
1787 2009-02-22 Pedro Alves <pedro@codesourcery.com>
1789 Silence a few -Wmissing-prototypes warnings.
1792 * alpha-linux-tdep.c (alpha_linux_regset_from_core_section): Make
1794 * alpha-osf1-tdep.c (_initialize_alpha_osf1_tdep): Declare.
1795 * amd64fbsd-tdep.c (amd64fbsd_init_abi): Make it static.
1796 * amd64nbsd-tdep.c (_initialize_amd64nbsd_ndep): Rename to ...
1797 (_initialize_amd64nbsd_tdep): ... this.
1798 * arm-linux-tdep.c (arm_linux_software_single_step): Make it static.
1799 (_initialize_arm_linux_tdep): Declare.
1800 * armbsd-tdep.c (armbsd_fpreg_offset): Make it static.
1801 * armnbsd-tdep.c (_initialize_arm_netbsd_tdep): Declare.
1802 * armobsd-tdep.c (_initialize_armobsd_tdep): Declare.
1803 * avr-tdep.c (avr_return_value): Make it static.
1804 (avr_frame_unwind_cache): Ditto.
1805 * bsd-uthread.c (bsd_uthread_inferior_created): Ditto.
1806 (bsd_uthread_solib_loaded): Ditto.
1807 (bsd_uthread_solib_unloaded): Ditto.
1808 (bsd_uthread_target): Ditto.
1809 (_initialize_bsd_uthread): Declare.
1810 * cris-tdep.c (crisv32_single_step_through_delay): Make it static.
1811 (cris_frame_unwind_cache): Ditto.
1812 * frv-tdep.c (frv_return_value): Ditto.
1813 * h8300-tdep.c (h8300_use_struct_convention): Ditto.
1814 (h8300h_use_struct_convention): Ditto.
1815 * hppa-tdep.c (hppa_sign_extend, hppa_low_hppa_sign_extend):
1817 * hppa-tdep.h (hppa_low_sign_extend, hppa_sign_extend): Delete
1819 * hppabsd-tdep.c: Include hppabsd-tdep.h.
1820 (hppabsd_find_global_pointer): Make it static.
1821 * hppabsd-tdep.h: New.
1822 * hppanbsd-tdep.c: Include hppabsd-tdep.h.
1823 (hppabsd_init_abi): Remove declaration.
1824 (_initialize_hppabsd_tdep): Remove declaration.
1825 (_initialize_hppanbsd_tdep): Declare.
1826 * hppaobsd-tdep.c: Include hppabsd-tdep.h.
1827 (hppabsd_init_abi): Delete declaration.
1828 (hppaobsd_init_abi): Make it static.
1829 * i386-nto-tdep.c (_initialize_i386nto_tdep): Declare.
1830 * i386nbsd-tdep.c (_initialize_i386nbsd_tdep): Declare.
1831 * ia64-linux-tdep.c (_initialize_ia64_linux_tdep): Declare.
1832 * ia64-tdep.c (ia64_register_reggroup_p): Make it static.
1833 * iq2000-tdep.c (_initialize_iq2000_tdep): Declare.
1834 * m32c-tdep.c (m32c_register_reggroup_p): Make it static.
1835 (m32c_analyze_prologue, m32c_virtual_frame_pointer): Ditto.
1836 (_initialize_m32c_tdep): Declare.
1837 * m32r-rom.c (_initialize_m32r_rom): Declare.
1838 * m32r-tdep.c (m32r_skip_prologue): Make it static.
1839 (m32r_return_value): Ditto.
1840 * m68hc11-tdep.c (m68hc11_frame_unwind_cache): Make it static.
1841 (m68hc11_return_value): Ditto.
1842 * m68klinux-tdep.c (_initialize_m68k_linux_tdep): Declare.
1843 * m88k-tdep.c (m88k_frame_cache): Make it static.
1844 * mep-tdep.c (mep_gdb_print_insn): Ditto.
1845 (mep_return_value): Ditto.
1846 (_initialize_mep_tdep): Declare.
1847 * mips-irix-tdep.c (_initialize_mips_irix_tdep): Declare.
1848 * mips-linux-tdep.c (supply_64bit_reg): Make it static.
1849 (mips_linux_syscall_next_pc): Ditto.
1850 (_initialize_mips_linux_tdep): Declare.
1851 * mips-tdep.c (mips_single_step_through_delay): Make it static.
1852 * mipsnbsd-tdep.c (_initialize_mipsnbsd_tdep): Declare.
1853 * mn10300-linux-tdep.c (_initialize_mn10300_linux_tdep): Declare.
1854 * mn10300-tdep.c (_initialize_mn10300_tdep): Declare.
1855 * mt-tdep.c (_initialize_mt_tdep): Declare.
1856 * nbsd-tdep.c: Include nbsd-tdep.h.
1857 * nto-tdep.c (find_load_phdr): Make it static.
1858 (_initialize_nto_tdep): Declare.
1859 * ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Make it
1861 (_initialize_ppc_linux_tdep): Declare.
1862 * remote-m32r-sdi.c (m32r_can_use_hw_watchpoint)
1863 (m32r_insert_watchpoint, m32r_remove_watchpoint)
1864 (m32r_stopped_data_address, m32r_stopped_by_watchpoint): Make
1866 * rs6000-aix-tdep.c (_initialize_rs6000_aix_tdep): Declare.
1867 * rs6000-nat.c: Include xcoffread.h.
1868 (find_toc_address): Don't extern declare get_toc_offset. Adjust
1869 to call xcoff_get_to_offset.
1870 * rs6000-tdep.c (ppc_vsx_support_p, ppc_displaced_step_fixup)
1871 (rs6000_skip_main_prologue, rs6000_in_solib_return_trampoline)
1872 (rs6000_skip_trampoline_code): Make static.
1873 * s390-tdep.c (s390_regset_from_core_section): Ditto.
1874 * sh-tdep.c (sh_register_reggroup_p): Ditto.
1875 * shnbsd-tdep.c (shnbsd_regset_from_core_section): Ditto.
1876 (_initialize_shnbsd_tdep): Declare.
1877 * solib-frv.c (displacement_from_map): Make static.
1878 (_initialize_frv_solib): Declare.
1879 * solib-irix.c (fetch_lm_info): Make static.
1880 (_initialize_irix_solib): Declare.
1881 * solib-som.c: Include solib-som.h.
1882 (som_solib_select): Line break.
1883 * sparc-tdep.c (sparc_regset_from_core_section): Make static.
1884 * sparcnbsd-tdep.c (_initialize_sparnbsd_tdep): Rename to ...
1885 (_initialize_sparcnbsd_tdep): ... this.
1886 * spu-tdep.c (spu_software_single_step): Make it static.
1887 (_initialize_spu_tdep): Declare.
1888 * vax-tdep.c (vax_frame_cache): Make it static.
1889 * xcoffread.c: Include xcoffread.h.
1890 (get_toc_offset): Rename to ...
1891 (xcoff_get_toc_offset): ... this.
1892 (_initialize_xcoffread): Declare.
1894 * xtensa-linux-tdep.c (_initialize_xtensa_linux_tdep): Declare.
1895 * xtensa-tdep.c (xtensa_skip_prologue, xtensa_derive_tdep): Make
1897 (_initialize_xtensa_tdep): Declare.
1899 2008-02-21 Pedro Alves <pedro@codesorcery.com>
1901 Silence a few -Wmissing-prototypes warnings.
1904 * amd64-nat.c: Include "amd64-nat.h".
1905 * fork-child.c (_initialize_fork_child): Ditto.
1906 * gcore.c (_initialize_gcore): Ditto.
1907 * inf-ptrace.c: Include "inf-ptrace.h".
1908 (inf_ptrace_store_registers): Make it static.
1909 * linux-nat.c (linux_nat_terminal_ours): Make it static.
1910 (_initialize_linux_nat): Declare before definition.
1911 * linux-tdep.c: Include "linux-tdep.h".
1912 * linux-thread-db.c (_initialize_thread_db): Declare before
1914 * proc-service.c (_initialize_proc_service): Ditto.
1915 * remote.c (remote_send_printf): Make it static.
1916 * solib.c: Include "solib.h".
1917 * symfile-mem.c (_initialize_symfile_mem): Declare before
1919 * ada-lang.c (ada_la_decode, ada_match_name)
1920 (ada_suppress_symbol_printing, ada_is_array_type)
1921 (ada_value_ptr_subscript, ada_array_length)
1922 (ada_to_static_fixed_value): Make them static.
1923 (_initialize_ada_language): Declare before definition.
1924 * ada-tasks.c (ada_get_task_number, ada_get_environment_task)
1925 (ada_task_list_changed, ada_new_objfile_observer): Make them
1927 (_initialize_tasks): Declare before definition.
1928 * addrmap.c (_initialize_addrmap): Declare before definition.
1929 * auxv.c (default_auxv_parse): Make it static.
1930 * bfd-target.c (target_bfd_xfer_partial, target_bfd_xclose): Make
1932 * breakpoint.c (remove_sal): Add line break.
1933 (expand_line_sal_maybe): Make it static.
1934 * cp-name-parser.y: Include "cp-support.h".
1935 * cp-valprint.c (cp_find_class_member): Make it static.
1936 * eval.c (value_f90_subarray): Ditto.
1937 * exceptions.c (print_any_exception): Ditto.
1938 * findcmd.c (_initialize_mem_search): Declare before definition.
1939 * frame.c (frame_observer_target_changed): Make it static.
1940 * gnu-v3-abi.c (gnuv3_find_method_in): Make it static.
1941 * inf-child.c: Include "inf-child.h".
1942 * inferior.h (valid_inferior_id): Rename to ...
1943 (valid_gdb_inferior_id): ... this.
1944 * infrun.c (infrun_thread_stop_requested, siginfo_make_value):
1946 * jv-lang.c (java_language_arch_info): Make it static.
1947 * m2-typeprint.c (m2_get_discrete_bounds): Ditto.
1948 * osdata.c (info_osdata_command): Make it static.
1949 * regcache.c (regcache_observer_target_changed): Make it static.
1950 * reverse.c (_initialize_reverse): Declare before definition.
1951 * stabsread.c (cleanup_undefined_types_noname)
1952 (cleanup_undefined_types_1): Make them static.
1953 * symfile.c (place_section): Make it static.
1954 * symtab.c (find_pc_sect_psymtab_closer): Make it static.
1955 * target-descriptions.c (_initialize_target_descriptions): Declare
1957 * target.c (default_get_ada_task_ptid, find_default_can_async_p)
1958 (find_default_is_async_p, find_default_supports_non_stop): Make
1960 (target_supports_non_stop): Add prototype.
1961 (dummy_pid_to_str): Make it static.
1962 * utils.c (_initialize_utils): Declare before definition.
1963 * ada-exp.y (_initialize_ada_exp): Declare before definition.
1964 * solib-svr4.c (HAS_LM_DYNAMIC_FROM_LINK_MAP): Add a prototype.
1965 * target.h (struct target_ops): Add a prototype to the
1966 to_can_execute_reverse callback.
1967 * macroscope.c (_initialize_macroscope): Declare before definition.
1968 * cp-namespace.c (_initialize_cp_namespace): Declare before definition.
1969 * python/python.c (_initialize_python): Declare before definition.
1970 * tui/tui-command.c: Include "tui/tui-command.h".
1971 * tui/tui-data.c (init_content_element, init_win_info): Make them
1973 * tui/tui-disasm.c: Include "tui/tui-disasm.h".
1974 * tui/tui-interp.c (_initialize_tui_interp): Declare before
1976 * tui/tui-layout.c: Include "tui/tui-layout.h".
1977 (_initialize_tui_layout): Declare before definition.
1978 * tui/tui-regs.c: Include "tui/tui-regs.h".
1979 (tui_display_reg_element_at_line): Make it static.
1980 (_initialize_tui_regs): Declare before definition.
1981 * tui/tui-stack.c (_initialize_tui_stack): Declare before
1983 * tui/tui-win.c: Include "tui/tui-win.h".
1984 (_initialize_tui_win): Declare before definition.
1985 (tui_sigwinch_handler): Make it static. Wrap in ifdef SIGWINCH.
1986 * tui/tui-win.h (tui_sigwinch_handler): Delete declaration.
1987 (tui_get_cmd_list): Add a prototype.
1988 * tui/tui-windata.c: Include tui-windata.h.
1989 * tui/tui-wingeneral.c (box_win): Make it static.
1990 * cli/cli-logging.c (show_logging_command): Make it static.
1991 (_initialize_cli_logging): Declare before definition.
1992 * mi/mi-common.c (_initialize_gdb_mi_common): Declare before
1995 2009-02-20 Pierre Muller <muller@ics.u-strasbg.fr>
1997 Extend use of i386_use_watchpoints to all i386 native files
1998 using hardware watchpoints.
1999 * go32-nat.c (init_go32_ops): Call i386_use_watchpoints.
2000 * i386fbsd-nat.c (_initialize_i386fbsd_nat): Ditto.
2001 * windows-nat.c (init_windows_ops): Ditto.
2002 * config/i386/nm-cygwin.h: Define I386_WATCHPOINTS_IN_TARGET_VECTOR.
2003 * config/i386/nm-cygwin64.h: Ditto.
2004 * config/i386/nm-fbsd.h: Ditto.
2005 * config/i386/nm-go32.h: Ditto.
2007 2009-02-19 Joel Brobecker <brobecker@adacore.com>
2009 * ada-typeprint.c (ada_typedef_print): Remove. Unused.
2011 2009-02-18 Vladimir Prus <vladimir@codesourcery.com>
2013 * mi/mi-interp.c (mi_solib_loaded, mi_solib_unloaded): New.
2014 (mi_interpreter_init): Register the above.
2015 * solib.c (clear_solib): Notify solib unload.
2016 * breakpoint.c (disable_breakpoints_in_unloaded_shlib): Do not
2017 disable breakpoints on a.out targets.
2019 2009-02-17 Vladimir Prus <vladimir@codesourcery.com>
2021 * observer.c (observer_test_first_notification_function)
2022 (observer_test_second_notification_function)
2023 (observer_test_third_notification_function): Adjust prototype.
2025 2009-02-17 Pedro Alves <pedro@codesourcery.com>
2027 * Makefile.in (ALL_64_TARGET_OBS): Add amd64-dicos-tdep.o.
2028 (ALL_TARGET_OBS): Add dicos-tdep.o.
2029 (ALLDEPFILES): Add amd64-dicos-tdep.c and dicos-tdep.c.
2030 * configure.tgt (i[34567]86-*-dicos*): Add dicos-tdep.o to
2032 (x86_64-*-dicos*): Add dicos-tdep.o and amd64-dicos-tdep.o to
2034 * dicos-tdep.h, dicos-tdep.c: New.
2035 * amd64-dicos-tdep.c: New.
2036 * i386-dicos-tdep.c: Don't include solib.h, solib-target.h or
2037 inferior.h. Include dicos-tdep.h.
2038 (i386_dicos_init_abi): Call dicos_init_abi.
2039 (i386_dicos_bfd_has_symbol_p): Delete.
2040 (i386_dicos_osabi_sniffer): Use dicos_load_module_p.
2042 * NEWS: Mention x86-64 DICOS target support.
2044 2009-02-16 Doug Evans <dje@google.com>
2046 * amd64-tdep.c (amd64_skip_prefixes): Renamed from skip_prefixes.
2047 All callers updated.
2048 (amd64_get_insn_details): Handle more 3-byte opcode insns.
2049 (amd64_breakpoint_p): Delete.
2050 (amd64_displaced_step_fixup): When fixing up after stepping an int3,
2051 don't back up pc to the start of the int3.
2052 * i386-tdep.c: #include opcode/i386.h.
2053 (i386_skip_prefixes): New function.
2054 (i386_absolute_jmp_p): Constify argument.
2055 (i386_absolute_call_p,i386_ret_p,i386_call_p,i386_syscall_p): Ditto.
2056 (i386_breakpoint_p): Delete.
2057 (i386_displaced_step_fixup): Handle unnecessary or redundant prefixes.
2058 When fixing up after stepping an int3, don't back up pc to the start
2061 2009-02-16 Pedro Alves <pedro@codesourcery.com>
2063 * corelow.c (core_close): Don't hardcode the core's pid.
2064 (core_open): Find core threads before calling
2065 post_create_inferior.
2066 (add_to_thread_list, get_core_register_section): Take into account
2067 systems where the regset section names encode the pid of the
2070 * gdbarch.sh (core_reg_section_encodes_pid): New gdbarch setting.
2071 * gdbarch.h, gdbarch.c: Regenerate.
2073 * amd64-sol2-tdep.c (amd64_sol2_init_abi): Set it.
2074 * i386-sol2-tdep.c (i386_sol2_init_abi): Set it.
2075 * sparc-sol2-tdep.c (sparc32_sol2_init_abi): Set it.
2076 * sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Set it.
2078 2009-02-14 Vladimir Prus <vladimir@codesourcery.com>
2080 Include frame information for *stopped due to CLI commands.
2082 * ada-tasks.c (ada_normal_stop_observer): Adjust prototype.
2083 * infcmd.c (finish_command_continuation): Pass '1' for
2084 'print_frame' parameter to the observer.
2085 * infrun.c (normal_stop): Don't print mi-specific information
2086 here. Pass 'stop_print_frame' to the 'print_frame' parameter
2088 * mi/mi-interp.c (mi_on_normal_stop): Adjust prototype.
2089 If we need to print frame, and current uiout is not the MI one,
2092 2009-02-13 Pierre Muller <muller@ics.u-strasbg.fr>
2094 * xtensa-tdep.c (call0_analyze_prologue): Delete BSZ macro.
2095 Replace BSZ macro uses by XTENSA_ISA_BSZ macro.
2097 2009-02-12 Jan Kratochvil <jan.kratochvil@redhat.com>
2100 * dwarf2read.c (process_die <DW_TAG_module>, read_module)
2101 (scan_partial_symbols <DW_TAG_module>, add_partial_module): New.
2103 2009-02-11 Pierre Muller <muller@ics.u-strasbg.fr>
2105 * dwarf2read.c (read_base_type): Set code to TYPE_CODE_CHAR
2106 for DW_ATE_signed_char and DW_ATE_unsigned_char
2107 for pascal language.
2109 2009-02-11 Jim Meyering <meyering@redhat.com>
2110 Jan Kratochvil <jan.kratochvil@redhat.com>
2112 Avoid NULL dereference.
2113 * stack.c (return_command): Guard use of SYMBOL_TYPE (thisfun).
2114 New variable func_type.
2116 2009-02-11 Pedro Alves <pedro@codesourcery.com>
2118 * gdbarch.c: Regenerate.
2120 2009-02-10 Pierre Muller <muller@ics.u-strasbg.fr>
2122 * p-lang.c (is_pascal_string_type): Fix comment.
2123 Determine exact size of char elements for GPC
2125 (pascal_printstr): Handle char width of 2 or 4.
2126 * p-valprint.c (pascal_val_print): Handle char
2129 2009-02-07 Daniel Jacobowitz <dan@codesourcery.com>
2131 * dwarf2read.c (dwarf2_build_psymtabs_hard): Move lowpc and highpc
2132 inside the loop. Only call addrmap_set_empty if the compilation unit
2133 had DW_AT_high_pc and DW_AT_low_pc. Update call to
2134 scan_partial_symbols.
2135 (scan_partial_symbols): Take NEED_PC argument and pass it along with
2137 (add_partial_namespace): Take NEED_PC argument and pass it through.
2138 (add_partial_subprogram): Take NEED_PC argument. Update the addrmap
2141 2009-02-07 Pedro Alves <pedro@codesourcery.com>
2143 * NEWS: Mention inspecting extra signal information, $_siginfo,
2144 and the qXfer:siginfo:read and qXfer:siginfo:write packets.
2146 2009-02-07 Pedro Alves <pedro@codesourcery.com>
2148 * linux-nat.c (PTRACE_SETSIGINFO): Define if PTRACE_GETSIGINFO
2151 2009-02-06 Pedro Alves <pedro@codesourcery.com>
2153 * amd64-linux-nat.c (compat_int_t, compat_uptr_t, compat_time_t)
2154 (compat_timer_t, compat_clock_t, struct compat_timeval)
2155 (compat_sigval_t, compat_siginfo_t): New types.
2156 (cpt_si_pid, cpt_si_uid, cpt_si_timerid, cpt_si_overrun)
2157 (cpt_si_status, cpt_si_utime, cpt_si_stime, cpt_si_ptr)
2158 (cpt_si_addr, cpt_si_band, cpt_si_fd): New defines.
2159 (compat_siginfo_from_siginfo, siginfo_from_compat_siginfo)
2160 (amd64_linux_siginfo_fixup): New.
2161 * linux-nat.c (linux_nat_siginfo_fixup): New.
2162 (siginfo_fixup): New.
2163 (linux_xfer_siginfo): Use siginfo_fixup to convert between the
2164 siginfo layout expected by ptrace and the siginfo layout of the
2166 (linux_nat_set_siginfo_fixup): New.
2167 * linux-nat.h (linux_nat_set_siginfo_fixup): Declare.
2169 2009-02-06 Pedro Alves <pedro@codesourcery.com>
2171 * target.h (enum target_object): Add new TARGET_OBJECT_SIGNAL_INFO.
2172 * infrun.c (siginfo_value_read, siginfo_value_write): New.
2173 (siginfo_value_funcs): New.
2174 (siginfo_make_value): New.
2175 (_initialize_infrun): Create the $_siginfo convenience variable.
2176 * gdbtypes.h (append_composite_type_field_aligned): Declare.
2177 * gdbtypes.c (append_composite_type_field): Rename to...
2178 (append_composite_type_field_aligned): ... this. Add ALIGNMENT
2179 argument. Handle it.
2180 (append_composite_type_field): Rewrite on top of
2181 append_composite_type_field_aligned.
2182 * value.h (internalvar_make_value): New typedef.
2183 (struct internalvar) <make_value>: New field.
2184 (create_internalvar_type_lazy): Declare.
2185 * value.c (create_internalvar): Clear make_value.
2186 (create_internalvar_type_lazy): New.
2187 (value_of_internalvar): If make_value is set use it.
2188 (preserve_values): Skip internal variables that don't have a
2190 * gdbarch.sh (get_siginfo_type): New.
2191 * gdbarch.h, gdbarch.c: Regenerate.
2193 * linux-tdep.h, linux-tdep.c: New.
2194 * amd64-linux-tdep.c: Include "linux-tdep.h".
2195 (amd64_linux_init_abi): Register linux_get_siginfo_type and
2196 linux_get_siginfo_mapper.
2197 * i386-linux-tdep.c: Include "linux-tdep.h".
2198 (i386_linux_init_abi): Register linux_get_siginfo_type and
2199 linux_get_siginfo_mapper.
2200 * arm-linux-tdep.c: Include "linux-tdep.h".
2201 (i386_linux_init_abi): Register linux_get_siginfo_type and
2202 linux_get_siginfo_mapper.
2204 * linux-nat.c (linux_xfer_siginfo): New.
2205 (linux_nat_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO.
2206 * remote.c (PACKET_qXfer_siginfo_read)
2207 (PACKET_qXfer_siginfo_write): New.
2208 (feature remote_protocol_features): Add "qXfer:siginfo:read" and
2209 "qXfer:siginfo:write" features.
2210 (remote_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO.
2211 (_initialize_remote): Add "set/show remote read-siginfo-object"
2212 and "set/show remote write-siginfo-object" commands.
2214 * Makefile.in (ALL_TARGET_OBS): Add linux-tdep.o.
2215 (HFILES_NO_SRCDIR): Add linux-tdep.h.
2216 (ALLDEPFILES): Add linux-tdep.c.
2218 * configure.tgt (arm*-*-linux* | arm*-*-uclinux*)
2219 (i[34567]86-*-linux*, x86_64-*-linux*): Add linux-tdep.o to
2222 2009-02-06 Jim Blandy <jimb@codesourcery.com>
2223 Daniel Jacobowitz <dan@codesourcery.com>
2224 Vladimir Prus <vladimir@codesourcery.com>
2225 Pedro Alves <pedro@codesourcery.com>
2227 * defs.h (enum lval_type): New value: lval_computed.
2228 * value.h (struct lval_funcs): New type.
2229 (allocate_computed_value, value_computed_funcs)
2230 (value_computed_closure): New declarations.
2231 * value.c (struct value): Add a structure to the location union
2232 for computed lvalues, containing 'funcs' and 'closure' members.
2233 (allocate_computed_value, value_computed_funcs)
2234 (value_computed_closure): New functions.
2235 (value_free): For computed lvalues, call the closure's
2236 'free_closure' function before freeing the value itself.
2237 (value_copy): If we're copying an lval_computed value, call the
2238 closure's 'copy_closure' function.
2239 (set_value_component_location): If the original value is a
2240 computed lvalue, then call the closure's 'copy_closure' function.
2241 (value_of_internalvar): If an internal variable's value is a
2242 computed lvalue, make retrieving its value produce an equivalent
2244 * valops.c (value_fetch_lazy): Unlazy computed lvalues by calling
2245 their read function.
2246 (value_assign): Assign to computed lvalues by calling their write
2249 2009-02-06 Pedro Alves <pedro@codesourcery.com>
2251 * linux-nat.c (linux_nat_wait): Adjust.
2252 (linux_nat_pid_to_str): Adjust. Remove call to thread_db_init.
2253 * linux-nat.h (thread_db_init): Delete declaration.
2254 * linux-thread-db.c (target_beneath): Delete.
2255 (thread_db_init): Delete.
2256 (thread_db_detach): Use find_target_beneath.
2257 (thread_db_wait): Adjust interface. Use find_target_beneath.
2258 (thread_db_mourn_inferior): Use find_target_beneath.
2259 (thread_db_can_async_p, thread_db_is_async_p, thread_db_async)
2260 (thread_db_async_mask): Delete.
2261 (thread_db_pid_to_str): Adjust interface. Use
2262 find_target_beneath.
2263 (thread_db_get_thread_local_address): Adjust interface. Use
2264 find_target_beneath.
2265 (init_thread_db_ops): Delete references to delete functions.
2266 * target.c (update_current_target): Don't inherit or default
2267 to_wait. Don't inherit to_pid_to_str and
2268 to_get_thread_local_address.
2269 (target_translate_tls_address): Look for a pushed target that
2270 implements to_get_thread_local_address, and use it instead of
2271 checking for target_get_thread_local_address_p.
2272 (target_wait, target_pid_to_str): Reimplement as functions.
2273 (dummy_pid_to_str): New.
2274 (init_dummy_target): Register it.
2275 (debug_to_wait): Delete.
2276 * target.h (struct target_ops): Make to_wait, to_pid_to_str and
2277 to_get_thread_local_address accept a pointer to struct target_ops.
2278 (target_wait): Delete macro, and declare as function.
2279 (target_pid_to_str): Likewise.
2280 (target_get_thread_local_address)
2281 (target_get_thread_local_address_p): Delete.
2282 (noprocess): Add NORETURN and ATTR_NORETURN tags.
2283 * inf-ptrace.c (inf_ptrace_wait): Adjust.
2284 (inf_ptrace_pid_to_str): New.
2285 (inf_ptrace_target): Use inf_ptrace_pid_to_str.
2286 * aix-thread.c (aix_thread_wait, aix_thread_pid_to_str): Adjust.
2287 * bsd-kvm.c (bsd_kvm_pid_to_str): Adjust.
2288 * bsd-uthread.c (bsd_uthread_wait, bsd_uthread_pid_to_str):
2290 * corelow.c (core_pid_to_str): Adjust.
2291 * darwin-nat.c (darwin_wait, darwin_pid_to_str): Adjust.
2292 * dec-thread.c (dec_thread_wait, dec_thread_pid_to_str): Adjust.
2293 * gnu-nat.c (gnu_wait, gnu_pid_to_str): Adjust.
2294 * go32-nat.c (go32_wait, go32_pid_to_str): Adjust.
2295 * hpux-thread.c (hpux_thread_wait): Adjust.
2296 * inf-ttrace.c (inf_ttrace_wait, inf_ttrace_pid_to_str): Adjust.
2297 * monitor.c (monitor_wait, monitor_pid_to_str): Adjust.
2298 * nto-procfs.c (procfs_wait, procfs_pid_to_str): Adjust.
2299 * procfs.c (procfs_pid_to_str): Adjust.
2300 * remote-m32r-sdi.c (m32r_wait, m32r_pid_to_str): Adjust.
2301 * remote-mips.c (mips_wait): Adjust.
2302 * remote-sim.c (gdbsim_wait, gdbsim_pid_to_str): Adjust.
2303 * remote.c (remote_wait, remote_pid_to_str)
2304 (remote_get_thread_local_address): Adjust.
2305 * rs6000-nat.c (rs6000_wait): Adjust.
2306 * sol-thread.c (procfs_pid_to_str): Adjust declaration.
2307 (sol_thread_wait, solaris_pid_to_str): Adjust.
2308 * spu-linux-nat.c (spu_child_wait): Adjust.
2309 * windows-nat.c (windows_wait, windows_pid_to_str): Adjust.
2311 2009-02-06 Tom Tromey <tromey@redhat.com>
2313 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-cmd.o.
2314 (SUBDIR_PYTHON_SRCS): Add python-cmd.c.
2315 (python-cmd.o): New target.
2316 * cli/cli-decode.c (set_cmd_completer): Add self parameter to
2317 completer prototype.
2318 (add_cmd): Initialize destroyer member of cmd_list_element. Use
2319 make_symbol_completion_list_fn as completer.
2320 (delete_cmd): Call destroyer if one is set.
2321 * cli/cli-decode.h (cmd_list_element): Add cmd parameter to
2322 completer member. Add destroyer member.
2323 (set_cmd_completer): Add self parameter to
2324 completer prototype.
2325 * command.h (set_cmd_completer): Add cmd parameter to
2326 completer prototype.
2327 * completer.c (noop_completer, filename_completer,
2328 location_completer, expression_completer, command_completer): Adapt
2329 to new completer prototype.
2330 (complete_line_internal): Pass new parameter to completer function.
2331 * completer.h (noop_completer, filename_completer,
2332 location_completer, expression_completer, command_completer): Adapt
2333 prototypes to new completer prototype.
2334 * interps.c (interpreter_completer): Adapt to new completer
2336 * python/python-cmd.c: New file.
2337 * python/python-internal.h (gdbpy_initialize_commands): Add
2339 (gdbpy_doc_cst): Add forward declaration.
2340 * python/python.c (gdbpy_doc_cst): Declare.
2341 (_initialize_python): Call gdbpy_initialize_commands. Initialize
2343 * symtab.c (make_symbol_completion_list_fn): New function.
2344 * symtab.h (make_symbol_completion_list_fn): Add prototype.
2346 2009-02-06 Pedro Alves <pedro@codesourcery.com>
2348 * target.c (target_get_osdata): Check for equal or higher than
2349 process_stratum, not dummy_stratum.
2351 2009-02-06 Pedro Alves <pedro@codesourcery.com>
2353 * remote.c (extended_remote_can_run): Delete.
2354 (init_remote_ops): Don't register it.
2355 * target.c (target_get_osdata): Don't check for target_can_run.
2356 Instead any target that has already been pushed, otherwise
2357 fallback to the default run target.
2359 2009-02-06 Pedro Alves <pedro@codesourcery.com>
2361 * target.c (target_create_inferior, target_detach)
2362 (target_mourn_inferior, target_attach, target_close): Do target
2364 (debug_to_attach, debug_to_detach, debug_to_create_inferior)
2365 (debug_to_mourn_inferior, debug_to_close): Delete.
2366 (setup_target_debug): Adjust.
2368 2009-02-05 Pedro Alves <pedro@codesourcery.com>
2370 * target.h (target_stopped_data_address_p): Delete declaration,
2371 and don't define as macro.
2372 * target.c (target_stopped_data_address_p): Delete.
2374 2009-02-05 Thiago Jung Bauermann <bauerman@br.ibm.com>
2375 Tom Tromey <tromey@redhat.com>
2377 * python/python-utils.c (target_string_to_unicode): New function.
2378 * python/python-internal.h (target_string_to_unicode): New prototype.
2379 * python/python-value.c (valpy_string): New function.
2380 (value_object_methods): Add `string' entry.
2382 2009-02-05 Pedro Alves <pedro@codesourcery.com>
2384 * target.h (target_tid_to_str): Delete.
2385 * thread.c (print_thread_info, thread_apply_all_command)
2386 (thread_apply_command, thread_command, do_captured_thread_select):
2387 Use target_pid_to_str instead of target_tid_to_str.
2388 * linux-fork.c (delete_fork_command): Likewise.
2390 2009-02-05 Pedro Alves <pedro@codesourcery.com>
2392 * frame.c (has_stack_frames): Make public.
2393 (get_prev_frame): Don't allow a NULL this_frame anymore.
2394 * frame.h (has_stack_frames): Declare.
2395 * varobj.c (find_frame_addr_in_frame_chain): Don't ever pass NULL
2396 to get_prev_frame, instead start at get_current_frame.
2397 (varobj_create): Check has_stack_frames before getting any frame;
2398 eliminate one usage of deprecated_safe_get_selected_frame.
2400 2009-02-05 Tom Tromey <tromey@redhat.com>
2401 Thiago Jung Bauermann <bauerman@br.ibm.com>
2403 * python/python.c (GdbMethods): Move to bottom of file.
2404 (get_parameter, execute_gdb_command, gdbpy_write,
2405 gdbpy_flush): Remove forward declarations.
2406 (eval_python_from_control_command): Fix error checking of function
2407 PyRun_SimpleString. Fix error string.
2408 (python_command): Likewise.
2409 (execute_gdb_command): Added from_tty argument.
2411 2009-02-05 Thiago Jung Bauermann <bauerman@br.ibm.com>
2413 * language.h (language_dfn): Add la_get_string member.
2414 (LA_GET_STRING): New macro.
2415 (default_get_string): New prototype.
2416 * language.c (default_get_string): New function.
2417 (unknown_language_defn, auto_language_defn, local_language_defn): Use
2418 default_get_string for la_get_string.
2419 * c-lang.c (c_get_string): New function.
2420 (c_language_defn, cplus_language_defn, asm_language_defn): Use
2421 c_get_string for la_get_string.
2422 (minimal_language_defn): Likewise
2423 * ada-lang.c (ada_language_defn): Likewise.
2424 * f-lang.c (f_language_defn): Use default_get_string for
2426 * jv-lang.c (java_language_defn): Likewise.
2427 * m2-lang.c (m2_language_defn): Likewise.
2428 * objc-lang.c (objc_language_defn): Likewise.
2429 * p-lang.c (p_language_defn): Likewise.
2430 * scm-lang.c (scm_language_defn): Likewise.
2431 * typeprint.c (type_to_string): New function.
2432 * value.h (type_to_string): New prototype.
2433 * valprint.c (val_print_string): Factor out code for reading string
2434 from the inferior into its own function. Put 2 spaces after period
2436 (read_string): New function.
2437 * valprint.h (read_string): New prototype.
2439 2009-01-07 Pierre Muller <muller@ics.u-strasbg.fr>
2440 Tom Tromey <tromey@redhat.com>
2442 PR breakpoints/8079:
2443 * breakpoint.c (print_one_breakpoint): Use exp_string field
2444 to display expression of watchpoints.
2445 (mention): Likewise.
2446 (watch_command_1): Remove trailing whitespace from expression.
2447 * printcmd.c (struct display) <exp_string>: New field.
2448 (display_command): Set exp_string.
2449 (free_display): Free exp_string.
2450 (clear_displays): Use free_display.
2451 (do_one_display): Print exp_string.
2452 (display_info): Likewise.
2454 2009-02-04 Tom Tromey <tromey@redhat.com>
2455 Thiago Jung Bauermann <bauerman@br.ibm.com>
2456 Phil Muldoon <pmuldoon@redhat.com>
2458 * python/python-internal.h (gdbpy_get_value_from_history): Rename
2459 prototype to gdbpy_history.
2460 (gdbpy_is_string): Declare.
2461 (python_string_to_host_string): Declare.
2462 * python/python-utils.c (gdbpy_is_string): New function.
2463 (unicode_to_encoded_string): New function.
2464 (unicode_to_target_string): Use it.
2465 (python_string_to_host_string): New function.
2466 * python/python-value.c (valpy_address): New function.
2467 (convert_value_from_python): Use gdbpy_is_string. Change to throw
2468 Python exception instead of a GDB exception on error. Properly check
2470 (valpy_getitem): Convert field name to host string. Handle array
2471 accesses. Adapt to new behaviour of convert_value_from_python.
2472 (valpy_new): Adapt to new behaviour of convert_value_from_python.
2473 (enum valpy_opcode) <VALPY_LSH, VALPY_RSH, VALPY_BITAND,
2474 VALPY_BITXOR, VALPY_BITOR>: New constants.
2475 (valpy_binop): Update. Adapt to new behaviour of
2476 convert_value_from_python.
2477 (valpy_invert): New function.
2478 (valpy_lsh): Likewise.
2479 (valpy_rsh): Likewise.
2480 (valpy_and): Likewise.
2481 (valpy_or): Likewise.
2482 (valpy_xor): Likewise.
2483 (valpy_richcompare): Call convert_value_from_python instead of doing
2485 (is_intlike, valpy_int, valpy_long, valpy_float): New functions.
2486 (gdbpy_get_value_from_history): Rename
2487 function to gdbpy_history.
2488 (gdbpy_initialize_values): Don't set tp_new.
2489 (value_object_type): Add valpy_new.
2490 (value_object_methods): Add `address' entry.
2491 (value_object_as_number): Update for new methods.
2492 * python/python.c (GdbMethods): Rename entry from
2493 `get_value_from_history' to `history'.
2495 2009-02-04 Jerome Guitton <guitton@adacore.com>
2497 * ada-lang.c (ada_template_to_fixed_record_type_1): Check size
2498 of type to guard against a crash.
2500 2009-02-04 Jerome Guitton <guitton@adacore.com>
2502 * value.c (value_from_contents_and_address): Always return
2503 a lval_memory value, even if address is null.
2505 2009-02-04 Tristan Gingold <gingold@adacore.com>
2507 * i386-darwin-tdep.c (i386_darwin_sigcontext_addr): New function.
2508 (amd64_darwin_sigcontext_addr): Ditto.
2509 (darwin_dwarf_signal_frame_p): Ditto.
2510 (i386_darwin_init_abi): Handle signal frames, use the const for
2512 (x86_darwin_init_abi_64): Ditto.
2514 2009-02-04 Tristan Gingold <gingold@adacore.com>
2516 * i386-tdep.c (i386_sigtramp_p): Make it public.
2517 * i386-tdep.h (i386_sigtramp_p): Declare.
2519 2009-02-04 Tristan Gingold <gingold@adacore.com>
2521 * machoread.c (macho_symfile_read): Read minsymtab also from
2523 (macho_symfile_read): Try to read dwarf2 frame info from main
2524 object file, but not from OSO files.
2525 (macho_symfile_offsets): Update section names for latest BFD
2527 * i386-darwin-tdep.c (i386_darwin_init_abi): Call set_solib_ops.
2528 (x86_darwin_init_abi_64): Ditto.
2529 * solib-darwin.c: New file.
2530 * solib-darwin.h: New file.
2531 * configure.tgt: Add solib.o solib-darwin.o for Darwin.
2533 2009-02-04 Tristan Gingold <gingold@adacore.com>
2535 * solist.h (struct target_so_ops): Comment fallback behavior for
2538 2009-02-03 Tom Tromey <tromey@redhat.com>
2540 * completer.c (add_struct_fields): Check type_name against NULL
2543 2009-02-03 Joel Brobecker <brobecker@adacore.com>
2545 * MAINTAINERS: Update Elena's email address.
2547 2009-02-02 Joel Brobecker <brobecker@adacore.com>
2549 * breakpoint (update_watchpoint): Minor comment adjustment.
2551 2009-02-02 Tom Tromey <tromey@redhat.com>
2554 * completer.c (count_struct_fields): Count method names.
2555 (add_struct_fields): Add matching method names.
2557 2009-02-02 Doug Evans <dje@google.com>
2559 * configure.ac (gdbkt): Check both no_tcl/no_tk first, before
2560 doing any further tcl/tk configury. Don't configure gdbtk if
2561 tcl or tk check fails.
2562 * aclocal.m4: Regenerate.
2563 * configure: Regenerate.
2565 2009-02-02 Tom Tromey <tromey@redhat.com>
2568 * valops.c (find_overload_match): Follow typedefs before taking
2569 address of object argument.
2571 2009-02-01 Doug Evans <dje@google.com>
2573 * target.h (target_waitstatus_to_string): Declare.
2574 * target.c (target_waitstatus_to_string): New function. Copied from
2575 debug_to_wait. Add missing entries for TARGET_WAITKIND_SYSCALL_ENTRY,
2576 TARGET_WAITKIND_SYSCALL_RETURN, TARGET_WAITKIND_IGNORE,
2577 TARGET_WAITKIND_NO_HISTORY.
2578 (debug_to_wait): Call it.
2579 * infrun.c (wait_for_inferior): If debug_infrun, print result of
2581 (fetch_inferior_event): Ditto.
2583 2009-01-30 Tom Tromey <tromey@redhat.com>
2585 * Makefile.in (HFILES_NO_SRCDIR): Remove i386-cygwin-tdep.h.
2587 2009-01-30 Vladimir Prus <vladimir@codesourcery.com>
2590 * thread.c (do_captured_list_thread_ids): Report the current
2593 2009-01-30 Vladimir Prus <vladimir@codesourcery.com>
2595 * breakpoint.c (create_breakpoint, create_breakpoints)
2596 (break_command_really, set_breakpoint): New parameter enabled.
2597 (create_breakpoint, break_command_really): Make breakpoint
2598 disabled if so requested.
2599 * breakpoint.h (set_breakpoint): New parameter enabled.
2600 * mi/mi-cmd-break.c (mi_cmd_break_insert): Handle the -d option.
2602 2009-01-28 Doug Evans <dje@google.com>
2604 * amd64-tdep.h (amd64_displaced_step_copy_insn): Declare.
2605 (amd64_displaced_step_fixup): Declare.
2606 * amd64-tdep.c: #include opcode/i386.h, dis-asm.h.
2607 (amd64_arch_regmap): Move out of amd64_analyze_stack_align
2608 and make static global.
2609 (amd64_arch_regmap_len): New static global.
2610 (amd64_arch_reg_to_regnum): New function.
2611 (struct amd64_insn): New struct.
2612 (struct displaced_step_closure): New struct.
2613 (onebyte_has_modrm,twobyte_has_modrm): New static globals.
2614 (rex_prefix_p,skip_prefixes)
2615 (amd64_insn_length_fprintf,amd64_insn_length_init_dis)
2616 (amd64_insn_length,amd64_get_unused_input_int_reg)
2617 (amd64_get_insn_details,fixup_riprel,fixup_displaced_copy)
2618 (amd64_displaced_step_copy_insn)
2619 (amd64_absolute_jmp_p,amd64_absolute_call_p,amd64_ret_p)
2620 (amd64_call_p,amd64_breakpoint_p,amd64_syscall_p)
2621 (amd64_displaced_step_fixup): New functions.
2622 * amd64-linux-tdep.c: #include arch-utils.h.
2623 (amd64_linux_init_abi): Install displaced stepping support.
2625 2009-01-28 Daniel Jacobowitz <dan@codesourcery.com>
2626 Jerome Guitton <guitton@adacore.com>
2628 * configure, config.in: Regenerated.
2629 * configure.ac: Add --with-system-gdbinit.
2630 * main.c (get_init_files): New.
2631 (captured_main): Use get_init_files. Load system gdbinit before
2633 (print_gdb_help): Print location of init files.
2635 2009-01-28 Pedro Alves <pedro@codesourcery.com>
2637 * corefile.c (generic_search): Delete disabled code.
2638 * gdbcore.h (generic_search): Delete declaration.
2640 2009-01-26 Pedro Alves <pedro@codesourcery.com>
2642 * linux-nat.c (linux_child_follow_fork): Copy attach_flag from the
2643 parent to the child.
2644 * inf-ttrace.c (inf_ttrace_follow_fork): Likewise.
2645 * inf-ptrace.c (inf_ptrace_follow_fork): Likewise. Use
2646 remove_breakpoints to remove breakpoints from the parent.
2648 2009-01-26 Pedro Alves <pedro@codesourcery.com>
2650 PR backtrace/9458, PR backtrace/8864:
2651 * frame.c (create_new_frame): Update the frame's cached PC before
2652 finding its unwinder. Use frame_id_build to build the new frame's
2654 * stack.c (parse_frame_specification_1): Correct setting ``addrs''
2655 array values from the ``args'' array values.
2657 2009-01-26 Pedro Alves <pedro@codesourcery.com>
2659 * gdbtypes.c (alloc_type, alloc_type_instance, create_range_type)
2660 (create_array_type, create_set_type, init_flags_type)
2661 (copy_type_recursive): Replace pairs of calls to XALLOC and memset
2662 with a call to XZALLOC or XCALLOC, and pairs of calls to
2663 obstack_alloc and memset with a call to OBSTACK_ZALLOC.
2665 2009-01-26 Pedro Alves <pedro@codesourcery.com>
2667 Add "maint set|show internal-error|internal-warning quit|corefile
2668 ask|yes|no" commands.
2671 * utils.c (internal_problem_ask, internal_problem_yes)
2672 (internal_problem_no, internal_problem_modes): New.
2673 (struct internal_problem): Remove FIXME. Make should_quit and
2674 should_dump_core types to char *.
2675 (internal_vproblem, internal_error_problem)
2676 (internal_warning_problem): Adjust.
2677 (set_internal_problem_cmd, show_internal_problem_cmd): New dummy
2679 (add_internal_problem_command): New.
2680 (_initialize_utils): New.
2682 2009-01-25 Pedro Alves <pedro@codesourcery.com>
2684 * infcmd.c (program_info): Use paddress instead of casting stop_pc
2687 2009-01-24 Pedro Alves <pedro@codesourcery.com>
2689 * infrun.c (normal_stop): Don't call
2690 deprecated_update_frame_pc_hack.
2691 * frame.c (deprecated_update_frame_pc_hack)
2692 (deprecated_update_frame_base_hack): Delete, and ...
2693 (create_new_frame): ... inline here.
2694 * frame.h (deprecated_update_frame_pc_hack)
2695 (deprecated_update_frame_base_hack): Delete declarations.
2697 2009-01-23 Pedro Alves <pedro@codesourcery.com>
2699 * cli/cli-decode.c (add_setshow_zuinteger_cmd): New.
2700 * cli/cli-setshow.c (do_setshow_command): Handle it.
2701 * command.h (enum var_types): Add var_zuinteger.
2702 (add_setshow_zuinteger_cmd): Declare.
2704 * valprint.c (_initialize_valprint): Change the set input-radix
2705 and set output-radix commands to zuinteger type.
2707 2009-01-23 Pedro Alves <pedro@codesourcery.com>
2710 * infrun.c (normal_stop): Tag threads as stopped, and run the
2711 hook-stop before printing the stack frame.
2713 2009-01-22 Pedro Alves <pedro@codesourcery.com>
2716 * gnu-v3-abi.c (gnuv3_baseclass_offset): Call check_typedef on
2719 2009-01-20 Kazu Hirata <kazu@codesourcery.com>
2721 * gdb/procfs.c (info_mappings_callback): Cast map->pr_size to
2724 2009-01-20 Daniel Jacobowitz <dan@codesourcery.com>
2727 * infcmd.c (signal_command): Do not specify a resume PC.
2729 2009-01-19 Doug Evans <dje@google.com>
2731 * dummy-frame.c (dummy_frame): Replace regcache member with
2733 (dummy_frame_push): Replace caller_regcache arg with caller_state.
2734 All callers updated.
2735 (remove_dummy_frame,pop_dummy_frame,lookup_dummy_frame): New fns.
2736 (dummy_frame_pop): Rewrite. Verify requested frame is in the
2737 dummy frame stack. Restore program state.
2738 (cleanup_dummy_frames): Rewrite.
2739 (dummy_frame_sniffer): Update. Make static.
2740 * dummy-frame.h (regcache,frame_info): Delete forward decls.
2741 (inferior_thread_state): New forward decl.
2742 (dummy_frame_push): Update prototype.
2743 * frame.c (frame_pop): dummy_frame_pop now does all the work for
2745 * infcall.c (breakpoint_auto_delete_contents): Delete.
2746 (get_function_name,run_inferior_call): New fns.
2747 (call_function_by_hand): Simplify by moving some code to
2748 get_function_name, run_inferior_call. Inferior function call wrapped
2749 in TRY_CATCH so there's less need for cleanups and all exits from
2750 proceed are handled similarily. Detect program exit.
2751 Detect program stopping in a different thread.
2752 Make error messages more consistent.
2753 * inferior.h (inferior_thread_state): Declare (opaque type).
2754 (save_inferior_thread_state,restore_inferior_thread_state,
2755 make_cleanup_restore_inferior_thread_state,
2756 discard_inferior_thread_state, get_inferior_thread_state_regcache):
2758 (save_inferior_status): Update prototype.
2759 * infrun.c: (normal_stop): When stopped for the completion of an
2760 inferior function call, verify the expected stack frame kind.
2761 (inferior_thread_state): New struct.
2762 (save_inferior_thread_state,restore_inferior_thread_state,
2763 do_restore_inferior_thread_state_cleanup,
2764 make_cleanup_restore_inferior_thread_state,
2765 discard_inferior_thread_state,
2766 get_inferior_thread_state_regcache): New functions.
2767 (inferior_status): Move stop_signal, stop_pc, registers to
2768 inferior_thread_state. Remove restore_stack_info.
2769 (save_inferior_status): Remove arg restore_stack_info.
2770 All callers updated. Remove saving of state now saved by
2771 save_inferior_thread_state.
2772 (restore_inferior_status): Remove restoration of state now done by
2773 restore_inferior_thread_state.
2774 (discard_inferior_status): Remove freeing of registers, now done by
2775 discard_inferior_thread_state.
2777 2009-01-18 Pedro Alves <pedro@codesourcery.com>
2779 * tui/tui-disasm.c (tui_vertical_disassem_scroll): Scroll one line
2780 at a time, times NUM_TO_SCROLL.
2781 * tui/tui-winsource.c (tui_horizontal_source_scroll): Don't try to
2782 fetch the selected frame if there is no stack.
2784 2009-01-18 Pedro Alves <pedro@codesourcery.com>
2787 * gdbthread.h (finish_thread_state, finish_thread_state_cleanup):
2789 * thread.c (finish_thread_state, finish_thread_state_cleanup): New.
2790 * infrun.c (wait_for_inferior, fetch_inferior_event): If an error
2791 is thrown while handling an event, finish the thread state.
2792 (normal_stop): Use finish_thread_state cleanup.
2793 * infcmd.c (run_command_1): If an error is thrown while starting
2794 the inferior, finish the thread state.
2796 2009-01-18 Pedro Alves <pedro@codesourcery.com>
2798 * tui/tui-winsource.c (tui_update_breakpoint_info): In asm layout,
2799 skip breakpoints without a location (pending breakpoints).
2801 2009-01-18 Pedro Alves <pedro@codesourcery.com>
2804 * hppa-hpux-tdep.c (hppa_hpux_write_pc): Remove 'return'.
2806 2009-01-18 Nick Roberts <nickrob@snap.net.nz>
2808 * thread.c (thread_command): Move call to annotate_thread_changed
2810 (do_captured_thread_select): ... here, to avoid printing an
2811 annotation if the thread change generates an exception.
2813 2009-01-16 Joel Brobecker <brobecker@adacore.com>
2815 * NEWS: Document x86_64/MinGW as a new native configuration.
2817 2009-01-16 Joel Brobecker <brobecker@adacore.com>
2819 * NEWS: Move the documentation of "info os processes" to
2820 the appropriate section (documenting the new commands).
2822 2009-01-15 Doug Evans <dje@google.com>
2824 * target.h (target_signal_to_string): Make return type const char *.
2825 (target_signal_to_name): Ditto.
2826 (target_signal_from_name): Make arg const char *.
2827 * infrun.c (sig_print_info): Update.
2828 * signals/signals.c (signals): Make array and struct members const.
2829 (target_signal_to_string): Make return type const char *.
2830 (target_signal_to_name): Ditto.
2831 (target_signal_from_name): Make arg const char *.
2833 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
2834 Tristan Gingold <gingold@adacore.com>
2836 * solist.h (struct target_so_ops): New member bfd_open.
2837 (solib_find): Add prototype.
2838 (solib_bfd_fopen): Add prototype.
2839 * solib.c (solib_find, solib_bfd_fopen): New functions, extracted
2840 from solib_bfd_open.
2841 (solib_bfd_open): Use ops->bfd_open override if present. Call
2842 solib_find and solib_bfd_open otherwise.
2844 * objfiles.h (OBJF_KEEPBFD): New define.
2845 * objfiles.c (free_objfile): Do not close BFD if OBJF_KEEPBFD
2846 objfile flag is set.
2847 * solib.c (symbol_add_stub): Do not allocate second BFD for
2848 shared library; use OBJF_KEEPBFD flag on solib objfile.
2850 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
2852 * frame.c (get_frame_arch): Abort if called with NULL this_frame.
2854 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
2856 * value.h (address_of_variable): Add prototype.
2857 (locate_var_value): Remove prototype.
2859 * findvar.c (read_var_value): Do not attempt to default frame
2861 (locate_var_value): Remove function.
2862 * valops.c (value_of_variable): Retrieve selected frame for
2863 symbols that require a frame when called with NULL block.
2864 * valops.c (address_of_variable): New function.
2866 * eval.c (evaluate_subexp_for_address): Call address_of_variable
2867 instead of calling locate_var_value.
2868 (evaluate_subexp_with_coercion): Likewise.
2870 2009-01-14 Daniel Jacobowitz <dan@codesourcery.com>
2872 * NEWS: Document "define" for prefixed commands.
2873 * cli/cli-cmds.c (show_user): Update calls to show_user_1. Call
2874 show_user_1 for prefix commands.
2875 * cli/cli-decode.c (help_cmd_list): Recurse for "help user-defined".
2876 * cli/cli-script.c (validate_comname): Rewrite to handle prefix
2877 commands. Return the containing command list.
2878 (define_command, document_command): Update to handle prefix commands.
2879 (show_user_1): Add prefix and name arguments. Handle prefix
2881 * cli/cli-script.h (show_user_1): Update prototype.
2883 2009-01-14 Kai Tietz <kai.tietz@onevision.com>
2885 * mingw-ser.c (console_select_thread): Add return to make
2887 (pipe_select_thread): Likewise.
2888 (file_select_thread): Likewise.
2890 2009-01-14 Pedro Alves <pedro@codesourcery.com>
2892 * mi/mi-main.c (mi_cmd_execute): Clean up parenthesis mess from
2895 2009-01-14 Pedro Alves <pedro@codesourcery.com>
2897 * remote.c (extended_remote_mourn_1): Invalidate our notion of
2898 current general thread.
2900 2009-01-14 Pedro Alves <pedro@codesourcery.com>
2902 * mi/mi-main.c (mi_cmd_execute): Also allow -list-thread-groups
2903 without a live selected thread.
2905 2009-01-14 Joel Brobecker <brobecker@adacore.com>
2907 Update the copyright notice of some of the files I missed
2908 in the previous copyright update.
2910 2009-01-14 Joel Brobecker <brobecker@adacore.com>
2912 * windows-nat.c (handle_unload_dll): Use %p to print the DLL
2913 base address instead of casting it to DWORD.
2915 2009-01-13 Ulrich Weigand <uweigand@de.ibm.com>
2917 * dwarf2loc.c (dwarf2_evaluate_loc_desc): Do not call get_frame_arch
2918 for NULL frame pointers.
2920 2009-01-13 Mark Kettenis <kettenis@gnu.org>
2922 * utils.c (host_address_to_string): Reimplement in a way that
2923 avoids the cast of the address to long.
2925 2009-01-13 Joel Brobecker <brobecker@adacore.com>
2927 * mdebugread.c (parse_symbol): Save the symbol private data
2928 using SYMBOL_VALUE_BYTES instead of SYMBOL_VALUE.
2929 (psymtab_to_symtab_1): Likewise.
2930 (parse_procedure): Declare variable "e" only in the scope
2931 where it is used. Extract the symbol private data using
2934 2009-01-13 Jim Blandy <jimb@codesourcery.com>
2936 Abstract out common code for copying value locations.
2938 * value.h (set_value_component_location): New declaration.
2939 * value.c (set_value_component_location): New function.
2940 (value_primitive_field): Use it.
2941 * valarith.c (value_subscript, value_subscripted_rvalue): Same.
2942 * valops.c (search_struct_field, value_slice): Same.
2943 * ada-lang.c (coerce_unspec_val_to_type)
2944 (ada_value_primitive_packed_val): Same.
2946 2009-01-13 Joel Brobecker <brobecker@adacore.com>
2948 * MAINTAINERS (GLOBAL MAINTAINERS): Add Tom Tromey.
2950 2009-01-12 Christopher Faylor <me+cygwin@cgf.cx>
2952 * amd64-windows-nat.c Rename gdb-specific win32_* to windows_*
2954 * i386-cygwin-tdep.c: Ditto.
2955 * i386-windows-nat.c: Ditto.
2956 * windows-nat.h: Ditto.
2957 * windows-tdep.c: Ditto.
2958 * windows-tdep.h: Ditto.
2959 * windows-nat.c: Ditto.
2960 (cygwin_load_start): Redefine as CORE_ADDR.
2961 (cygwin_load_end): Ditto.
2962 (windows_make_so): Coerce result of address arithmetic to uintptr_t
2963 before coercing to CORE_ADDR to avoid a compiler warning.
2964 (handle_exception): Define addr as CORE_ADDR and coerce
2965 ExceptionAddress to uintptr_t before assigining to avoid a compiler
2967 * config/djgpp/fnchange.lst: Add mappings for recently renamed windows
2970 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
2972 Fix linking with --enable-targets=all:
2973 * Makefile.in (ALL_TARGET_OBS): Add windows-tdep.o.
2974 (HFILES_NO_SRCDIR): Add windows-tdep.h.
2975 (ALLDEPFILES): Add windows-tdep.c.
2977 2009-01-11 Chris Faylor <me.gdb@cgf.cx>
2979 * win32-nat.h: Delete.
2980 * windows-nat.h: Rename from win32-nat.h.
2981 * win32-nat.c: Delete.
2982 * windows-nat.c: Rename from win32-nat.c.
2983 * win32-termcap.c: Delete.
2984 * windows-termcap.c: Rename from win32-termcap.c.
2985 * amd64-windows-nat.c: Handle rename from win32-nat.h -> windows-nat.h.
2986 * configure.ac: Handle rename from win32-termcap.c ->
2988 * configure: Regenerate.
2989 * gdb_curses.h: Change comment to reflect rename from win32-termcap.c
2990 -> windows-termcap.c.
2991 * i386-cygwin-tdep.c: Handle rename from win32-tdep.h ->
2993 * i386-windows-nat.c: Refect rename from win32-nat.h -> windows-nat.h.
2994 * windows-nat.c: Ditto. Also reflect rename from from win32-tdep.h ->
2996 (win32_make_so): Handle cygwin compiler warning due to change of
2997 load_addr from DWORD to LPVOID.
2998 (handle_load_dll): Use %p in format string to properly print address
2999 and avoid a compiler warning.
3000 (DEBUG_EXCEPTION_SIMPLE): Ditto.
3001 (handle_exception): Ditto.
3002 * windows-tdep.c: Handle rename from win32-tdep.h -> windows-tdep.h.
3003 * config/i386/cygwin.mh: Handle rename from win32-nat.o ->
3005 * config/i386/mingw.mh: Ditto.
3006 * config/i386/mingw64.mh: Ditto.
3008 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
3010 * f-typeprint.c (f_type_print_varspec_suffix): Convert the autovariable
3011 arrayprint_recurse_level to a parameter. Update all the callers. New
3012 comment at autovariables.
3014 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
3016 * gdbtypes.c (make_qualified_type, replace_type): Reformat to the GNU
3019 2009-01-11 Joel Brobecker <brobecker@adacore.com>
3021 * target.c (target_xfer_partial): Use host_address_to_string to
3022 print the address of readbuf and writebuf. Cast the address of
3023 elements inside the myaddr buffer into intptr_t.
3024 (deprecated_debug_xfer_memory): Use paddress to print memaddr.
3025 Cast the address of elements inside the myaddr buffer into
3028 2009-01-11 Joel Brobecker <brobecker@adacore.com>
3030 * amd64-windows-nat.c, amd64-windows-tdep.c: New files.
3031 * config/i386/mingw64.mh, config/i386/nm-cygwin64.h: New files.
3032 * configure.host, configure.tgt: Add handling for x86_64/windows.
3033 * config/djgpp/fnchange.lst: Add entries for amd64-windows-nat.c
3034 and amd64-windows-tdep.c.
3036 2009-01-11 Joel Brobecker <brobecker@adacore.com>
3038 * win32-tdep.h, win32-tdep.c: New files.
3039 * i386-cygwin-tdep.h: Delete.
3040 * i386-cygwin-tdep.c: Include win32-tdep.h instead of
3042 (win32_xfer_shared_library): Delete. Moved to win32-tdep.c.
3043 * win32-nat.c: Likewise.
3044 * configure.tgt: Add win32-tdep.o to the list of target object
3045 files for i386-cygwin and i386-mingw targets.
3047 2009-01-11 Joel Brobecker <brobecker@adacore.com>
3049 * win32-nat.h: New file.
3050 * win32-nat.c (mappings): Initialize to NULL.
3051 (win32_set_context_register_offsets): New function.
3052 * i386-windows-nat.c: New file.
3053 (mappings): Moved here from win32-nat.c.
3054 (_initialize_i386_windows_nat): New function.
3055 * config/i386/mingw.mh (NATDEPFILES): Add i386-windows-nat.o.
3056 * config/i386/cygwin.mh (NATDEPFILES): Likewise.
3058 2009-01-09 Andreas Schwab <schwab@suse.de>
3060 * Makefile.in (init.c): Set LANG/LC_ALL to C, not c.
3062 2009-01-09 Daniel Jacobowitz <dan@codesourcery.com>
3064 * gdbtypes.c (append_composite_type_field): Correct the location of
3067 2009-01-09 Pedro Alves <pedro@codesourcery.com>
3069 * defs.h (deprecated_error_hook): Delete declaration.
3070 * interps.c (clear_interpreter_hooks): Adjust.
3071 * remote-sim.c (gdb_os_error): Don't try to call
3072 deprecated_error_hook. No need to call exit anymore.
3073 * top.c (deprecated_error_hook): Delete.
3075 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3077 * arch-utils.c (gdbarch_update_p): Use host_address_to_string
3078 to print the address of the gdbarch pointer.
3080 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3082 * gdbarch.sh: Fix all the compilation errors on amd64-windows
3083 due to casting a pointer to a long when printing a function
3084 address. Instead, use host_address_to_string to convert our
3085 address to a string.
3086 * gdbarch.c: Regenerate.
3088 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3090 * event-top.c (async_disconnect, async_stop_sig): use "raise"
3091 instead of "kill" to raise a signal.
3093 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3095 * win32-nat.c (get_module_name): Change the type of parameter
3096 "base_address" to LPVOID. Remove unnecessary cast.
3097 (struct lm_info): Change type of load_addr to LPVOID.
3098 (win32_make_so): Change the type of parameter "load_addr"
3099 to LPVOID. Remove some unnecessary casts.
3100 (handle_unload_dll): Change the type of "lpBaseOfDll" to LPVOID.
3101 (win32_xfer_shared_libraries): Add missing cast.
3103 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3105 * win32-nat.c (has_detach_ability, set_process_privilege):
3106 Cast the result of GetProcAddress to (void *) to avoid
3107 a compilation warning.
3109 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3111 * win32-nat.c (CONTEXT_EXTENDED_REGISTERS): Define to 0 if not
3114 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3116 * win32-nat.c (get_image_name, win32_xfer_memory): Fix type
3117 definition of local variable "done".
3118 (info_w32_command, handle_exception): Remove unnecessary cast.
3120 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3122 * win32-nat.c (kernel32_DebugSetProcessKillOnExit): Renames
3123 DebugSetProcessKillOnExit. Update all uses in this file.
3124 (kernel32_DebugActiveProcessStop): Renames DebugActiveProcessStop.
3125 Update all uses in this file.
3127 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3129 * win32-nat.c (do_initial_win32_stuff): Add new ops parameter,
3130 and use it when pushing the target.
3131 (win32_attach, win32_create_inferior): Update call to
3132 do_initial_win32_stuff.
3133 (win32_detach, win32_mourn_inferior): Use our ops parameter
3134 instead of the global win32_ops to unpush the target.
3136 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3138 * ser-mingw.c (ser_windows_open): Use proper type when casting
3139 in call to _open_osfhandle.
3141 2009-01-09 Kai Tietz <kai.tietz@onevision.com>
3143 * coff-pe-read.c (read_pe_exported_syms): Fix typo.
3145 2009-01-09 Joel Brobecker <brobecker@adacore.com>
3147 * CONTRIBUTE: Minor reformatting.
3149 2009-01-08 Kai Tietz <kai.tietz@onevision.com>
3151 * MAINTAINERS: Add myself to Write After Approval.
3152 * coff-pe-read.c (read_pe_exported_syms): Enable read of PE+
3155 2009-01-08 Nathan Froyd <froydnj@codesourcery.com>
3157 * remote-sim.c (gdb_os_error): Mark as a noreturn function.
3158 Call exit to make it obvious to GCC.
3160 2009-01-08 Tom Tromey <tromey@redhat.com>
3162 PR breakpoints/9350:
3163 * varobj.c (varobj_invalidate): Unconditionally free
3165 * symfile.c (syms_from_objfile): Free local_addr when returning
3167 * exec.c (exec_file_attach): Do cleanups before returning.
3168 (exec_file_command): Likewise.
3169 * corefile.c (reopen_exec_file): Do cleanups before returning.
3170 * breakpoint.c (insert_breakpoint_locations): Do cleanups before
3172 (do_vec_free): New function.
3173 (update_global_location_list): Make a cleanup for old_locations.
3174 Do cleanups before returning. Remove unused variable 'e'.
3175 (find_condition_and_thread): Free result of parsing the
3177 (print_it_typical): Do cleanups before returning.
3178 (breakpoint_re_set_one): Always free sals.sals.
3180 2009-01-08 Joel Brobecker <brobecker@adacore.com>
3181 Emi Suzuki <emi-suzuki@tjsys.co.jp>
3183 * breakpoint.c (do_enable_breakpoint): Use update_watchpoint for
3186 2009-01-07 Doug Evans <dje@google.com>
3188 * top.c (gdb_prompt_string): Delete, unused.
3190 2009-01-07 Pedro Alves <pedro@codesourcery.com>
3192 Delete ONE_PROCESS_WRITETEXT leftovers.
3194 * breakpoint.c (insert_bp_location): Delete process_warning
3196 (insert_breakpoint_locations): Adjust.
3197 (reattach_breakpoints): Adjust.
3198 * infrun.c (normal_stop): Drop "It might be running in another
3201 2009-01-07 Stan Shebs <stan@codesourcery.com>
3203 * config/pa/linux.mh (XDEPFILES): Remove.
3205 2009-01-07 Doug Evans <dje@google.com>
3207 * cli/cli-cmds.c (set_debug): Fix cut-n-paste error.
3209 2009-01-07 Jan Kratochvil <jan.kratochvil@redhat.com>
3211 * f-typeprint.c (f_type_print_base <TYPE_CODE_STRUCT>): Fix output
3212 spacing, a regression from 2008-04-22.
3214 2009-01-07 Joel Brobecker <brobecker@adacore.com>
3216 * utils.c (gdb_print_host_address): Adjust implementation to
3217 reuse host_address_to_string. Move comment explaining the conversion
3218 from host address to string from here...
3219 (host_address_to_string): ... to there.
3221 2009-01-07 Emi Suzuki <emi-suzuki@tjsys.co.jp>
3223 * MAINTAINERS: Add myself for write after approval privileges.
3225 2009-01-06 Tom Tromey <tromey@redhat.com>
3227 * value.c (set_internalvar): Use value_free, not xfree.
3229 2009-01-06 Jim Blandy <jimb@red-bean.com>
3231 Check return values of functions declared with warn_unused_result
3232 attribute in GLIBC 2.8.
3233 * cli/cli-cmds.c (pwd_command): Check return value from getcwd.
3234 * inflow.c (check_syscall): New function.
3235 (new_tty): Use check_syscall to check return values from open and dup.
3236 * linux-nat.c (linux_nat_info_proc_cmd): Check return value from fgets.
3237 * main.c (captured_main): Call cwd after setting up gdb_stderr;
3238 check for errors from getcwd.
3239 * mi/mi-cmd-env.c (mi_cmd_env_pwd): Check return value from getcwd.
3240 * ui-file.c (stdio_file_write): Ignore return value from fwrite.
3241 (stdio_file_fputs): Same.
3242 * utils.c (internal_vproblem): abort if last-ditch error message
3245 * top.c (gdb_init): Don't set the current directory here; that's
3246 already been done in captured_main.
3248 2009-01-06 Sandra Loosemore <sandra@codesourcery.com>
3250 * ser-tcp.c: Adjust includes.
3251 (tcp_set_cmdlist, tcp_show_cmdlist): Declare.
3252 (tcp_auto_retry, tcp_retry_limit): Declare.
3253 (TIMEOUT): Remove, in favor of tcp_retry_limit.
3254 (POLL_INTERVAL): Increase to 5, in favor of backoff logic.
3255 (wait_for_connect): New function.
3256 (net_open): Use it. Add auto-retry logic.
3257 (set_tcp_cmd, show_tcp_cmd): New functions.
3258 (_initialize_ser_tcp): Initialize new "set/show tcp auto-retry"
3259 and "set/show tcp connect-timeout" commands.
3260 * NEWS: Document new commands.
3262 2009-01-05 Tom Tromey <tromey@redhat.com>
3264 * python/python-internal.h (Py_ssize_t): Define as int.
3266 2009-01-05 Jim Blandy <jimb@red-bean.com>
3268 * MAINTAINERS: Fix my e-mail address as steering committee member.
3270 2009-01-03 Joel Brobecker <brobecker@adacore.com>
3272 Updated copyright notices for most files.
3274 2009-01-03 Joel Brobecker <brobecker@adacore.com>
3276 * top.c (print_gdb_version): Update copyright year.
3278 2009-01-03 Joel Brobecker <brobecker@adacore.com>
3280 * config/djgpp/fnchange.lst: Add entry for ChangeLog-2008.
3282 2009-01-01 Pedro Alves <pedro@codesourcery.com>
3284 PR breakpoints/9681:
3285 * exceptions.h (enum errors): New error type, MEMORY_ERROR.
3286 * corefile.c (memory_error): Rewrite to throw a MEMORY_ERROR.
3287 * breakpoint.c (fetch_watchpoint_value): Ignore MEMORY_ERRORs, but
3288 retrow all other exceptions.
3290 For older changes see ChangeLog-2008.
3296 version-control: never
projects / deliverable / binutils-gdb.git / blob