1 2012-02-29 Joel Brobecker <brobecker@adacore.com>
3 * ada-lang.c (to_fixed_array_type): Set result's type name.
5 2012-02-29 Joel Brobecker <brobecker@adacore.com>
7 * ada-lang.c (catch_ada_exception_command_split): Add new
8 argument cond_string. Add support for condition at end of
9 "catch exception" commands.
10 (ada_decode_exception_location): Add new argument cond_string.
11 Update call to catch_ada_exception_command_split.
12 (create_ada_exception_catchpoint): Add new argument cond_string.
13 Set the breakpoint condition if needed.
14 (catch_ada_exception_command): Update call to
15 ada_decode_exception_location.
16 (ada_decode_assert_location): Add function documentation.
17 Add support for condition at end of "catch assert" command.
18 (catch_assert_command): Update calls to ada_decode_assert_location
19 and create_ada_exception_catchpoint.
21 2012-02-29 Jan Kratochvil <jan.kratochvil@redhat.com>
23 Fix disp-step-syscall.exp: fork: single step over fork.
24 * i386-linux-tdep.c (-i386_linux_get_syscall_number): Rename to ...
25 (i386_linux_get_syscall_number_from_regcache): ... here, new function
26 comment, change parameters gdbarch and ptid to regcache. Remove
27 parameter regcache, initialize gdbarch from regcache here.
28 (i386_linux_get_syscall_number, i386_linux_displaced_step_copy_insn):
30 (i386_linux_init_abi): Install i386_linux_displaced_step_copy_insn
32 * i386-tdep.c (i386_syscall_p): Check also for 'sysenter' and
33 'syscall'. Make the 'int' check more strict.
35 2012-02-29 Jan Kratochvil <jan.kratochvil@redhat.com>
37 Fix reverse mode for syscall on AMD CPUs in 32-bit mode.
38 * i386-linux-tdep.c (i386_linux_intx80_sysenter_record): Rename to ...
39 (i386_linux_intx80_sysenter_syscall_record): ... here.
40 (i386_linux_init_abi): Initialize also I386_SYSCALL_RECORD.
41 Use the renamed function name.
43 2012-02-29 Jan Kratochvil <jan.kratochvil@redhat.com>
45 * arm-linux-tdep.c (arm_linux_copy_svc): Reset stale FRAME.
46 * breakpoint.c (until_break_command): Likewise.
47 * elfread.c (elf_gnu_ifunc_resolver_stop): Likewise.
48 * infcall.c (call_function_by_hand): Likewise.
49 * infcmd.c (finish_forward): Likewise.
50 * infrun.c (insert_exception_resume_breakpoint): Likewise.
52 2012-02-28 Joel Brobecker <brobecker@adacore.com>
54 From Tristan Gingold <gingold@adacore.com>.
55 * ada-tasks.c (ada_tasks_inferior_data_sniffer): Rework code to
56 avoid variable assignments inside condition.
58 2012-02-28 Jan Kratochvil <jan.kratochvil@redhat.com>
60 Fix static analysis issue found by cppcheck.
61 * microblaze-tdep.c (microblaze_extract_return_value): Fix
62 uninitialized BUF for size 2.
64 2012-02-27 Chris Dearman <chris@mips.com>
65 Nathan Froyd <froydnj@codesourcery.com>
66 Maciej W. Rozycki <macro@codesourcery.com>
68 * mips-tdep.c (mips32_instruction_has_delay_slot): New function.
69 (mips16_instruction_has_delay_slot): Likewise.
70 (mips_segment_boundary): Likewise.
71 (mips_adjust_breakpoint_address): Likewise.
72 (mips_gdbarch_init): Use mips_adjust_breakpoint_address.
74 2012-02-27 Maciej W. Rozycki <macro@mips.com>
75 Maciej W. Rozycki <macro@codesourcery.com>
77 * infrun.c (handle_inferior_event): Don't proceed through
78 shared library trampolines if stepping at the machine
81 2012-02-27 Maciej W. Rozycki <macro@codesourcery.com>
83 * mips-linux-tdep.c (mips_linux_init_abi): Set num_pseudo_regs
86 2012-02-27 Thomas Schwinge <thomas@codesourcery.com>
88 * sh-tdep.c (sh_make_stub_cache, sh_stub_this_id)
89 (sh_stub_unwind_sniffer): New functions.
90 (sh_stub_unwind): New variable.
91 (sh_gdbarch_init): Wire everything.
93 2012-02-27 Pedro Alves <palves@redhat.com>
95 * linux-nat.c (pid_is_stopped): Delete, moved to common/.
96 (linux_nat_post_attach_wait): Adjust to use
97 linux_proc_pid_is_stopped.
98 * common/linux-procfs.h (linux_proc_pid_is_stopped): Declare.
99 * common/linux-procfs.c (linux_proc_pid_is_stopped): New function,
100 based on pid_is_stopped from both linux-nat.c and
101 gdbserver/linux-low.c, and renamed.
103 2012-02-24 Maciej W. Rozycki <macro@codesourcery.com>
105 * remote.c (remote_watchpoint_addr_within_range): New function.
106 (init_remote_ops): Use it.
108 2012-02-24 Maciej W. Rozycki <macro@codesourcery.com>
110 * target.h (target_watchpoint_addr_within_range): Document macro.
112 2012-02-24 Pedro Alves <palves@redhat.com>
114 * stack.c (set_last_displayed_sal): Issue internal_error instead
115 of warning, and issue it after clearing the last displayed sal.
117 2012-02-24 Jan Kratochvil <jan.kratochvil@redhat.com>
118 Pedro Alves <palves@redhat.com>
120 * breakpoint.c (until_break_command): Install breakpoints after
121 all frame manipulations.
123 2012-02-24 Luis Machado <lgustavo@codesourcery.com>
125 * remote.c (remote_supports_cond_breakpoints): New forward
127 (remote_add_target_side_condition): New function.
128 (remote_insert_breakpoint): Add target-side breakpoint
129 conditional if supported.
130 (remote_insert_hw_breakpoint): Likewise.
131 (init_remote_ops): Set to_supports_evaluation_of_breakpoint_conditions
134 * target.c (update_current_target): Inherit
135 to_supports_evaluation_of_breakpoint_conditions.
136 Default to_supports_evaluation_of_breakpoint_conditions to return_zero.
138 * target.h (struct target_ops)
139 <to_supports_evaluation_of_breakpoint_conditions>: New field.
140 (target_supports_evaluation_of_breakpoint_conditions): New #define.
142 * breakpoint.c (get_first_locp_gte_addr): New forward declaration.
143 (condition_evaluation_both, condition_evaluation_auto,
144 condition_evaluation_host, condition_evaluation_target,
145 condition_evaluation_enums, condition_evaluation_mode_1,
146 condition_evaluation_mode): New static globals.
147 (translate_condition_evaluation_mode): New function.
148 (breakpoint_condition_evaluation_mode): New function.
149 (gdb_evaluates_breakpoint_condition_p): New function.
150 (ALL_BP_LOCATIONS_AT_ADDR): New helper macro.
151 (mark_breakpoint_modified): New function.
152 (mark_breakpoint_location_modified): New function.
153 (set_condition_evaluation_mode): New function.
154 (show_condition_evaluation_mode): New function.
155 (bp_location_compare_addrs): New function.
156 (get_first_location_gte_addr): New helper function.
157 (set_breakpoint_condition): Free condition bytecode if locations
158 has become unconditional. Call mark_breakpoint_modified (...).
159 (condition_command): Call update_global_location_list (1) for
161 (breakpoint_xfer_memory): Use is_breakpoint (...).
162 (is_breakpoint): New function.
163 (parse_cond_to_aexpr): New function.
164 (build_target_condition_list): New function.
165 (insert_bp_location): Handle target-side conditional
166 breakpoints and call build_target_condition_list (...).
167 (update_inserted_breakpoint_locations): New function.
168 (insert_breakpoint_locations): Handle target-side conditional
170 (bpstat_check_breakpoint_conditions): Add comment.
171 (bp_condition_evaluator): New function.
172 (bp_location_condition_evaluator): New function.
173 (print_breakpoint_location): Print information on where the condition
175 (print_one_breakpoint_location): Likewise.
176 (init_bp_location): Call mark_breakpoint_location_modified (...) for
178 (force_breakpoint_reinsertion): New functions.
179 (update_global_location_list): Handle target-side breakpoint
181 Reinsert locations that are already inserted if conditions have
183 (bp_location_dtor): Free agent expression bytecode.
184 (disable_breakpoint): Call mark_breakpoint_modified (...).
185 Call update_global_location_list (...) with parameter 1 for breakpoints.
186 (disable_command): Call mark_breakpoint_location_modified (...).
187 Call update_global_location_list (...) with parameter 1 for breakpoints.
188 (enable_breakpoint_disp): Call mark_breakpoint_modified (...).
189 (enable_command): mark_breakpoint_location_modified (...).
190 (_initialize_breakpoint): Update documentation and add
191 condition-evaluation breakpoint subcommand.
193 * breakpoint.h: Include ax.h.
194 (condition_list): New data structure.
195 (condition_status): New enum.
196 (bp_target_info) <cond_list>: New field.
197 (bp_location) <condition_changed, cond_bytecode>: New fields.
198 (is_breakpoint): New prototype.
200 2012-02-24 Luis Machado <lgustavo@codesourcery.com>
202 * remote.c (remote_state) <cond_breakpoints>: New field.
203 (PACKET_ConditionalBreakpoints): New enum.
204 (remote_cond_breakpoint_feature): New function.
205 (remote_protocol_features): Add new ConditionalBreakpoints entry.
206 (remote_supports_cond_breakpoints): New function.
207 (_initialize_remote): Add new packet configuration for
208 target-side conditional breakpoints.
210 2012-02-24 Luis Machado <lgustavo@codesourcery.com>
212 * NEWS: Mention target-side conditional breakpoint support,
213 new condition-evaluation breakpoint subcommand and remote
216 2012-02-24 Luis Machado <lgustavo@codesourcery.com>
218 * breakpoint.c (bp_location_compare): Sort by pspace before sorting by
221 2012-02-24 Thomas Schwinge <thomas@codesourcery.com>
223 * sh-tdep.c (sh_skip_prologue): Use skip_prologue_using_sal.
224 (after_prologue): Remove.
226 2012-02-23 Tom Tromey <tromey@redhat.com>
228 * jv-valprint.c (java_val_print): Remove dead code.
230 2012-02-23 Tristan Gingold <gingold@adacore.com>
232 * ada-tasks.c (struct ada_tasks_inferior_data): Add
233 known_tasks_element and known_tasks_length fields.
234 (read_known_tasks_array): Change argument type. Use pointer type
235 and number of elements from DATA. Adjust.
236 (read_known_tasks_list): Likewise.
237 (get_known_tasks_addr): Remove.
238 (ada_set_current_inferior_known_tasks_addr): Renamed to ...
239 (ada_tasks_inferior_data_sniffer): ... this. Use symtab for element
240 type and array length. Merge former get_known_tasks_addr code.
242 2012-02-23 Jan Kratochvil <jan.kratochvil@redhat.com>
245 * infcmd.c (finish_forward): New variable frame_id, initialize it, use
246 it after set_momentary_breakpoint.
248 2012-02-22 Sterling Augustine <saugustine@google.com>
251 * breakpoint.c (watchpoint_exp_is_constant): Add UNOP_CAST to switch.
253 2012-02-22 Gary Benson <gbenson@redhat.com>
255 * dwarf2read.c (dwarf2_read_index): Correct misspelling.
256 (find_slot_in_mapped_hash): Likewise.
258 2012-02-21 Jan Kratochvil <jan.kratochvil@redhat.com>
261 * configure.ac (MAKEINFO): Replace AC_CHECK_PROG by AC_ARG_VAR.
262 (MAKEINFOFLAGS): Replace static string by AC_ARG_VAR.
263 * configure: Regenerate.
265 2012-02-21 Tristan Gingold <gingold@adacore.com>
266 Pedro Alves <palves@redhat.com>
268 * ia64-tdep.c: Do not include libunwind-ia64.h.
269 * libunwind-frame.h: Remove #ifdef HAVE_LIBUNWIND_H guard.
270 Include libunwind-ia64.h instead of libunwind.h.
271 * configure.ac (--with-libunwind, $enable_libunwind): Don't check
272 for libunwind.h existence.
273 * configure, config.in: Regenerate.
275 2012-02-21 Anton Gorenkov <xgsa@yandex.ru>
277 * c-valprint.c (c_value_print): Use value_rtti_indirect_type
278 instead of value_rtti_target_type.
279 * eval.c (evaluate_subexp_standard): Use value_rtti_indirect_type
280 instead of value_rtti_target_type.
281 * typeprint.c (whatis_exp): Use value_rtti_indirect_type instead of
282 value_rtti_target_type.
283 * valops.c (value_ind): Extract function readjust_indirect_value_type.
284 (value_rtti_target_type): Rename to ...
285 (value_rtti_indirect_type): ... here and make it indirect. Update
287 * value.c (readjust_indirect_value_type): New function.
288 (coerce_ref): Support for enclosing type setting for references
289 with readjust_indirect_value_type.
290 * value.h (readjust_value_type): New declaration.
291 (value_rtti_target_type): Rename to ...
292 (value_rtti_indirect_type): ... here.
294 2012-02-21 Anton Gorenkov <xgsa@yandex.ru>
296 * MAINTAINERS (Write After Approval): Add myself to the list.
298 2012-02-20 Doug Evans <dje@google.com>
300 * objfiles.c (add_to_objfile_sections): Remove outdated comments.
301 Rename objfile_p_char parameter to objfilep.
302 (build_objfile_section_table): Result is now void. All callers
304 * objfiles.h (struct objfile): Tweak comments, whitespace.
305 (build_objfile_section_table): Update.
307 * elfread.c (elf_symfile_segments): Fix warning text.
309 2012-02-20 Tom Tromey <tromey@redhat.com>
312 * dwarf2read.c (dw2_expand_symtabs_matching): Only visit a
313 particular set of file names once.
314 (dw2_map_symbol_filenames): Likewise.
316 2012-02-20 Jan Kratochvil <jan.kratochvil@redhat.com>
319 * main.c (write_files): Remove the declaration.
320 (external_editor_command): Move the declaration ...
321 [GDBTK] (external_editor_command): ... here. Fix the comment.
323 2012-02-20 Tom Tromey <tromey@redhat.com>
325 * dwarf2read.c (dw2_map_symtabs_matching_filename): Remove
328 2012-02-20 Tristan Gingold <gingold@adacore.com>
330 * darwin-nat.h (enum darwin_msg_state): Add comments.
332 2012-02-20 Tristan Gingold <gingold@adacore.com>
334 * amd64-darwin-tdep.c (x86_darwin_init_abi_64): Fix jb_pc_offset
337 2012-20-18 Joel Brobecker <brobecker@adacore.com>
339 * breakpoint.c (watchpoint_exp_is_const): Add missing empty line
340 between function description and implementation.
342 2012-02-17 Tom Tromey <tromey@redhat.com>
345 * python/py-event.c (event_object_getset): New global.
346 (event_object_type): Reference it.
347 * python/py-type.c (field_object_getset): New global.
348 (field_object_type): Reference it.
349 * python/python-internal.h (gdb_py_generic_dict): Declare.
350 * python/py-utils.c (gdb_py_generic_dict): New function.
352 2012-02-17 Tristan Gingold <gingold@adacore.com>
354 * solib-darwin.c (darwin_current_sos): Check magic and filetype
356 2012-02-17 Thomas Schwinge <thomas@codesourcery.com>
358 * sh-tdep.c (sh_is_renesas_calling_convention): Fix handling of
359 TYPE_CALLING_CONVENTION annotation.
361 2012-02-16 Kevin Buettner <kevinb@redhat.com>
363 * MAINTAINERS: Add rx to target ISA section.
364 * Makefile.in (ALL_TARGET_OBS): Add rx-tdep.o.
365 (ALLDEPFILES): Add rx-tdep.c.
367 2012-02-16 Tom Tromey <tromey@redhat.com>
369 * symfile.c (symbol_file_add_main_1): Use inferior's
371 * solib.c (solib_read_symbols): Use inferior's symfile_flags.
372 * linux-nat.c (linux_child_follow_fork): Set symfile_flags on
374 * infrun.c (handle_vfork_child_exec_or_exit): Set symfile_flags on
376 (follow_exec): Use inferior's symfile_flags.
377 * inferior.h (struct inferior) <symfile_flags>: New field.
379 2012-02-16 Mike Frysinger <vapier@gentoo.org>
382 * remote-sim.c (gdbsim_create_inferior): Call error() when
383 sim_create_inferior() fails.
385 2012-02-16 Josh Matthews <josh@joshmatthews.net>
387 * machoread.c: Initialize nbr_syms to avoid warnings-as-errors failure.
389 2012-02-16 Tom Tromey <tromey@redhat.com>
392 * thread.c (struct current_thread_cleanup) <was_removable>: New
394 (restore_current_thread_cleanup_dtor): Restore 'removable' field.
395 (make_cleanup_restore_current_thread): Initialize new field.
397 2012-02-15 Kevin Buettner <kevinb@redhat.com>
399 * MAINTAINERS: Add rl78 to target ISA section.
400 * Makefile.in (ALL_TARGET_OBS): Add rl78-tdep.o.
401 (ALLDEPFILES): Add rl78-tdep.c.
402 * NEWS: Mention rl78 as a new target.
404 2012-02-15 Aleksandar Ristovski <aristovski@qnx.com>
406 * frame.c (find_frame_sal): Initialize sal->pspace field from frame
408 * stack.c (set_last_displayed_sal): Validate that PSPACE is not NULL.
410 2012-02-15 Tom Tromey <tromey@redhat.com>
413 * infcmd.c (registers_info): Print just the current register's
416 2012-02-15 Tom Tromey <tromey@redhat.com>
418 * python/py-symbol.c (sympy_value): Use _().
420 2012-02-15 Pedro Alves <palves@redhat.com>
422 * remote.c (remote_detach_1, extended_remote_attach_1): Tweak
423 output to be like native targets'.
424 (remote_pid_to_str): Special case the null ptid.
426 2012-02-14 Stan Shebs <stan@codesourcery.com>
428 * NEWS: Mention enable count command.
429 * breakpoint.h (struct breakpoint): New field enable_count.
430 * breakpoint.c (enable_breakpoint_disp): Add count argument.
431 (enable_breakpoint): Add arg to call.
432 (struct disp_data): New struct.
433 (do_enable_breakpoint_disp): Interp arg as disp_data and unpack.
434 (do_map_enable_once_breakpoint): Create a struct and pass it.
435 (do_map_enable_delete_breakpoint): Ditto.
436 (do_map_enable_count_breakpoint): New function.
437 (enable_count_command): New function.
438 (bpstat_stop_status): Decrement enable_count.
439 (print_one_breakpoint_location): Report enable count.
440 (_initialize_breakpoint): Add enable count command.
442 2012-02-14 Kevin Buettner <kevinb@redhat.com>
444 * rl78-tdep.c (reggroups.h): Include.
445 (RL78_RAW_BANK0_R0_REGNUM, RL78_RAW_BANK0_R1_REGNUM)
446 (RL78_RAW_BANK0_R2_REGNUM, RL78_RAW_BANK0_R3_REGNUM)
447 (RL78_RAW_BANK0_R4_REGNUM, RL78_RAW_BANK0_R5_REGNUM)
448 (RL78_RAW_BANK0_R6_REGNUM, RL78_RAW_BANK0_R7_REGNUM)
449 (RL78_RAW_BANK1_R0_REGNUM, RL78_RAW_BANK1_R1_REGNUM)
450 (RL78_RAW_BANK1_R2_REGNUM, RL78_RAW_BANK1_R3_REGNUM)
451 (RL78_RAW_BANK1_R4_REGNUM, RL78_RAW_BANK1_R5_REGNUM)
452 (RL78_RAW_BANK1_R6_REGNUM, RL78_RAW_BANK1_R7_REGNUM)
453 (RL78_RAW_BANK2_R0_REGNUM, RL78_RAW_BANK2_R1_REGNUM)
454 (RL78_RAW_BANK2_R2_REGNUM, RL78_RAW_BANK2_R3_REGNUM)
455 (RL78_RAW_BANK2_R4_REGNUM, RL78_RAW_BANK2_R5_REGNUM)
456 (RL78_RAW_BANK2_R6_REGNUM, RL78_RAW_BANK2_R7_REGNUM)
457 (RL78_RAW_BANK3_R0_REGNUM, RL78_RAW_BANK3_R1_REGNUM)
458 (RL78_RAW_BANK3_R2_REGNUM, RL78_RAW_BANK3_R3_REGNUM)
459 (RL78_RAW_BANK3_R4_REGNUM, RL78_RAW_BANK3_R5_REGNUM)
460 (RL78_RAW_BANK3_R6_REGNUM, RL78_RAW_BANK3_R7_REGNUM): Add to
461 beginning of register list.
462 (RL78_BANK0_R0_REGNUM, RL78_BANK0_R1_REGNUM, RL78_BANK0_R2_REGNUM)
463 (RL78_BANK0_R3_REGNUM, RL78_BANK0_R4_REGNUM, RL78_BANK0_R5_REGNUM)
464 (RL78_BANK0_R6_REGNUM, RL78_BANK0_R7_REGNUM, RL78_BANK1_R0_REGNUM)
465 (RL78_BANK1_R1_REGNUM, RL78_BANK1_R2_REGNUM, RL78_BANK1_R3_REGNUM)
466 (RL78_BANK1_R4_REGNUM, RL78_BANK1_R5_REGNUM, RL78_BANK1_R6_REGNUM)
467 (RL78_BANK1_R7_REGNUM, RL78_BANK2_R0_REGNUM, RL78_BANK2_R1_REGNUM)
468 (RL78_BANK2_R2_REGNUM, RL78_BANK2_R3_REGNUM, RL78_BANK2_R4_REGNUM)
469 (RL78_BANK2_R5_REGNUM, RL78_BANK2_R6_REGNUM, RL78_BANK2_R7_REGNUM)
470 (RL78_BANK3_R0_REGNUM, RL78_BANK3_R1_REGNUM, RL78_BANK3_R2_REGNUM)
471 (RL78_BANK3_R3_REGNUM, RL78_BANK3_R4_REGNUM, RL78_BANK3_R5_REGNUM)
472 (RL78_BANK3_R6_REGNUM, RL78_BANK3_R7_REGNUM): Move these into
473 the pseudo registers. Rearrange other pseudo registers too so
474 that the bank registers appear at the end.
475 (rl78_register_type): Account for the fact that the byte sized
476 bank registers are now pseudo-registers.
477 (rl78_register_name): Rearrange the register name array. Make
478 initial set of raw banked registers inaccessible.
479 (rl78_register_reggroup_p, rl78_register_sim_regno): New functions.
480 (rl78_pseudo_register_read, rl78_pseudo_register_write): Add
481 case for copying bytes back and forth between raw and pseudo
482 versions of the banked registers. Update other cases to reflect
484 (rl78_return_value): Update to account for changed names of
486 (rl78_gdbarch_init): Register rl78_register_reggroup_p() and
487 rl78_register_sim_regno().
489 2012-02-14 Kevin Buettner <kevinb@redhat.com>
491 * rl78-tdep.c (rl78_skip_prologue): Make `const' the type of
492 the name parameter being passed to find_pc_partial_function().
494 2012-02-14 Jan Kratochvil <jan.kratochvil@redhat.com>
496 * MAINTAINERS: Step down from being ia64 target maintainer.
498 2012-02-12 Jan Kratochvil <jan.kratochvil@redhat.com>
500 * ppc-linux-nat.c (fetch_register, store_register): Fix GCC aliasing
503 2012-02-12 Jan Kratochvil <jan.kratochvil@redhat.com>
505 Fix crash on loaded shlibs without loaded exec_bfd.
506 * exec.c (exec_files_info): Do not crash on NULL EXEC_BFD.
507 (set_section_command): Replace exec_bfd by p->bfd.
509 2012-02-10 Tom Tromey <tromey@redhat.com>
511 * linespec.c (decode_line_internal): Skip symtabs_from_filename
512 when we have a C++ qualified name.
514 2012-02-10 Pedro Alves <palves@redhat.com>
516 * inferior.c (inferior_pid_to_str): New.
517 (print_inferior, inferior_command): Use it.
519 2012-02-10 Pedro Alves <palves@redhat.com>
521 * configure.ac (HAVE_ELF test): Put the old CFLAGS at the end of
523 * configure: Regenerate.
525 2012-02-10 Jan Kratochvil <jan.kratochvil@redhat.com>
527 * linespec.c (decode_line_internal): Fix comment correctness.
529 2012-02-09 Valery Khromov <valery.khromov@gmail.com>
532 * Makefile.in (HFILES_NO_SRCDIR): Add amd64bsd-nat.h.
533 * amd64bsd-nat.c: Add support for debug registers (adapted from
535 [HAVE_PT_GETDBREGS] (amd64bsd_dr_get, amd64bsd_dr_set)
536 (amd64bsd_dr_set_control, amd64bsd_dr_set_addr)
537 (amd64bsd_dr_get_addr, amd64bsd_dr_get_status)
538 (amd64bsd_dr_get_control): New functions.
539 * amd64bsd-nat.h: New file (adapted from i386bsd-nat.h).
540 * amd64fbsd-nat.c: Include "amd64bsd-nat.h", "i386-nat.h".
541 [HAVE_PT_GETDBREGS] (_initialize_amd64fbsd_nat): Add hardware
542 watchpoints initialization.
543 * config/i386/fbsd64.mh (NATDEPFILES): Add i386-nat.o.
545 2012-02-09 Jan Kratochvil <jan.kratochvil@redhat.com>
547 * gdb-gdb.py (StructMainTypePrettyPrinter) <struct_field_img>: Print
549 (StructMainTypePrettyPrinter) <bounds_img>: Print flds_bnds.bounds.
551 2012-02-09 Jan Kratochvil <jan.kratochvil@redhat.com>
553 * breakpoint.c (bp_location_compare): Fix comment. Reindent the code.
555 2012-02-08 Joel Brobecker <brobecker@adacore.com>
557 * language.h (symbol_name_cmp_ftype): Renames
558 symbol_name_match_p_ftype.
559 (struct language_defn)[la_get_symbol_name_cmp]: Renames
560 la_get_symbol_name_match_p.
561 * ada-lang.c (ada_get_symbol_name_cmp): Renames
562 ada_get_symbol_name_match_p. Update comment.
563 (ada_language_defn)[la_get_symbol_name_cmp]: Update value.
564 * linespec.c (struct symbol_matcher_data)[symbol_name_cmp]:
565 Renames symbol_name_match_p. Update field type.
566 (iterate_name_matcher, iterate_over_all_matching_symtabs): Adjust.
567 * c-lang.c, d-lang.c, f-lang.c, jv-lang.c, m2-lang.c, objc-lang.c,
568 opencl-lang.c, p-lang.c: Replace "la_get_symbol_name_match_p" by
569 "la_get_symbol_name_cmp" in comments.
570 * language.c: Likewise.
572 2012-02-08 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
574 * amd64-sol2-tdep.c (amd64_sol2_gregset_reg_offset): Correct
576 * i386-sol2-nat.c (amd64_sol2_gregset64_reg_offs)
577 (amd64_sol2_gregset32_reg_offs): Likewise.
579 2012-02-08 Joel Brobecker <brobecker@adacore.com>
581 * solib-darwin.c (darwin_bfd_open): Make sure that the filename
582 of the returned BFD is allocated by GDB.
584 2012-02-07 Tom Tromey <tromey@redhat.com>
587 * python/python-internal.h (frame_object_type): Declare.
588 * python/py-symbol.c (sympy_needs_frame): New function.
589 (sympy_value): New function.
590 (symbol_object_getset): Add "needs_frame".
591 (symbol_object_methods): Add "value".
592 * python/py-frame.c (frame_object_type): No longer static.
594 2012-02-07 Tom Tromey <tromey@redhat.com>
597 * python/py-symbol.c (sympy_line): New function.
598 (symbol_object_getset): Add "line".
600 2012-02-07 Tom Tromey <tromey@redhat.com>
602 * charset.c (find_charset_names): Check 'in' against NULL.
604 2012-02-06 Doug Evans <dje@google.com>
606 * gdbtypes.h (struct main_type): Change type of name,tag_name,
607 and fields.name members from char * to const char *. All uses updated.
608 (struct cplus_struct_type): Change type of fn_fieldlists.name member
609 from char * to const char *. All uses updated.
610 (type_name_no_tag): Update.
611 (lookup_unsigned_typename, lookup_signed_typename): Update.
612 * gdbtypes.c (type_name_no_tag): Change result type
613 from char * to const char *. All callers updated.
614 (lookup_unsigned_typename, lookup_signed_typename): Change type of
615 name parameter from char * to const char *.
616 * symtab.h (struct cplus_specific): Change type of demangled_name
617 member from char * to const char *. All uses updated.
618 (struct general_symbol_info): Change type of name and
619 mangled_lang.demangled_name members from char * to const char *.
621 (symbol_get_demangled_name, symbol_natural_name): Update.
622 (symbol_demangled_name, symbol_search_name): Update.
623 * symtab.c (symbol_get_demangled_name): Change result type
624 from char * to const char *. All callers updated.
625 (symbol_natural_name, symbol_demangled_name): Ditto.
626 (symbol_search_name): Ditto.
627 (completion_list_add_name): Change type of symname,sym_text,
628 text,word parameters from char * to const char *.
629 (completion_list_objc_symbol): Change type of sym_text,
630 text,word parameters from char * to const char *.
631 * ada-lang.c (find_struct_field): Change type of name parameter
632 from char * to const char *.
633 (encoded_ordered_before): Similarly for N0,N1 parameters.
634 (old_renaming_is_invisible): Similarly for function_name parameter.
635 (ada_type_name): Change result type from char * to const char *.
637 * ada-lang.h (ada_type_name): Update.
638 * buildsym.c (hashname): Change type of name parameter
639 from char * to const char *.
640 * buildsym.h (hashname): Update.
641 * dbxread.c (end_psymtab): Change type of include_list parameter
642 from char ** to const char **.
643 * dwarf2read.c (determine_prefix): Change result type
644 from char * to const char *. All callers updated.
645 * f-lang.c (find_common_for_function): Change type of name, funcname
646 parameters from char * to const char *.
647 * f-lang.c (find_common_for_function): Update.
648 * f-valprint.c (list_all_visible_commons): Change type of funcname
649 parameters from char * to const char *.
650 * gdbarch.sh (static_transform_name): Change type of name parameter
651 and result from char * to const char *.
652 * gdbarch.c: Regenerate.
653 * gdbarch.h: Regenerate.
654 * i386-sol2-tdep.c (i386_sol2_static_transform_name): Change type
655 of name parameter from char * to const char *.
656 * jv-lang.c (java_primitive_type_from_name): Ditto.
657 (java_demangled_signature_length): Similarly for signature parameter.
658 (java_demangled_signature_copy): Ditto.
659 (java_demangle_type_signature): Ditto.
660 * jv-lang.h (java_primitive_type_from_name): Update.
661 (java_demangle_type_signature): Update.
662 * objc-lang.c (specialcmp): Change type of a,b parameters
663 from char * to const char *.
664 * p-lang.c (is_pascal_string_type): Change type of arrayname parameter
665 from char * to const char *. All callers updated.
666 * p-lang.h (is_pascal_string_type): Update.
667 * solib-frv.c (find_canonical_descriptor_in_load_object): Change type
668 of name parameter from char * to const char *.
669 * sparc-sol2-tdep.c (sparc_sol2_static_transform_name): Ditto.
670 * utils.c (fprintf_symbol_filtered): Ditto.
671 * defs.h (fprintf_symbol_filtered): Update.
672 * sparc-tdep.h (sparc_sol2_static_transform_name): Update.
673 * stabsread.h (end_psymtab): Update.
674 * stack.c (find_frame_funname): Change type of funname parameter
675 from char ** to const char **.
676 * stack.h (find_frame_funname): Update.
677 * typeprint.c (type_print): Change type of varstring parameter
678 from char * to const char *.
679 * value.h (type_print): Update.
680 * xcoffread.c (xcoff_start_psymtab): Change type of filename parameter
681 from char * to const char *. All callers updated.
682 (xcoff_end_psymtab): Change type of include_list parameter
683 from char ** to const char **. All callers updated.
684 (swap_sym): Similarly for name parameter. All callers updated.
685 * coffread.c (patch_type): Add (char*) cast to xfree parameter.
687 (process_coff_symbol): Use xstrdup.
688 * stabsread.c (stabs_method_name_from_physname): Renamed from
689 update_method_name_from_physname. Change result type from void
690 to char *. All callers updated.
691 (read_member_functions): In has_destructor case, store name in objfile
692 obstack instead of malloc space. In !has_stub case, fix mem leak.
694 2012-02-06 Luca Pizzamiglio <luca.pizzamiglio@gmail.com>
696 * configure: Rebuild.
697 * configure.ac: Put -L../bfd and -L../libiberty at the front of
700 2012-02-03 Kevin Buettner <kevinb@redhat.com>
702 * configure.tgt (rl78-*-elf): New target.
703 * rl78-tdep.c: New file.
705 2012-02-03 Philippe Waroquiers <philippe.waroquiers@skynet.be>
707 * remote.c (remote_rcmd): Use getpkt_sane to detect timeout
708 and continue the loop. Add QUIT statement.
710 2012-02-03 Tom Tromey <tromey@redhat.com>
713 * solib.h (gdb_bfd_lookup_symbol_from_symtab): Rename from
714 bfd_lookup_symbol_from_symtab.
715 * solib-pa64.c (pa64_solib_create_inferior_hook): Use
716 gdb_bfd_lookup_symbol_from_symtab.
718 2012-02-03 Joel Brobecker <brobecker@adacore.com>
720 * mi/mi-cmd-stack.c (list_args_or_locals): For argument symbols,
721 use SYMBOL_LINKAGE_NAME to find the corresponding non-argument
722 symbol. Add assertion that sym2 is never NULL.
724 2012-02-02 Doug Evans <dje@google.com>
726 * blockframe.c (find_pc_partial_function_gnu_ifunc): Change type of
727 "name" parameter to const char ** from char **. All callers updated.
728 (find_pc_partial_function): Ditto.
729 (cache_pc_function_name): Change type to const char * from char *.
730 * symtab.h ((find_pc_partial_function_gnu_ifunc): Update.
731 (find_pc_partial_function): Update.
732 * alpha-tdep.h (struct gdbarch_tdep, member pc_in_sigtramp): Change
733 type of "name" parameter to const char * from char *.
735 * arch-utils.c (generic_in_solib_return_trampoline): Change
736 type of "name" parameter to const char * from char *.
737 * arch-utils.h (generic_in_solib_return_trampoline): Update.
738 * frv-linux-tdep.c (frv_linux_pc_in_sigtramp): Change
739 type of "name" parameter to const char * from char *.
740 * gdbarch.sh (in_solib_return_trampoline): Ditto.
741 * gdbarch.c: Regenerate.
742 * gdbarch.h: Regenerate.
743 * hppa-hpux-tdep.c (hppa_hpux_in_solib_return_trampoline): Update.
744 * rs6000-tdep.c (rs6000_in_solib_return_trampoline): Update.
745 * m32r-linux-tdep.c (m32r_linux_pc_in_sigtramp): Change
746 type of "name" parameter to const char * from char *.
747 * skip.c (skip_function_pc): Ditto.
748 * sparc-sol2-tdep.c (sparc_sol2_pc_in_sigtramp): Ditto.
749 * sparc-tdep.h (sparc_sol2_pc_in_sigtramp): Update.
750 * sparc64fbsd-tdep.c (sparc64fbsd_pc_in_sigtramp): Ditto.
751 * sparc64nbsd-tdep.c (sparc64nbsd_pc_in_sigtramp): Ditto.
752 * sparc64obsd-tdep.c (sparc64obsd_pc_in_sigtramp): Ditto.
753 * sparcnbsd-tdep.c (sparc32nbsd_pc_in_sigtramp): Ditto.
754 * sparcobsd-tdep.c (sparc32obsd_pc_in_sigtramp): Ditto.
755 * nbsd-tdep.c (nbsd_pc_in_sigtramp): Similary for "func_name".
756 * nbsd-tdep.h (nbsd_pc_in_sigtramp): Update.
758 2012-02-02 Pedro Alves <palves@redhat.com>
760 * remote.c (remote_get_min_fast_tracepoint_insn_len): Return 0 if
761 the current inferior has no execution. Make sure the current
762 remote process matches gdb's current inferior.
764 2012-02-02 Tom Tromey <tromey@redhat.com>
767 * tui/tui-win.c (parse_scrolling_args): Don't write to possibly
770 2012-02-02 Tom Tromey <tromey@redhat.com>
773 * symtab.c (lookup_language_this): Set block_found.
775 2012-02-01 Tom Tromey <tromey@redhat.com>
778 * jit.c (struct jit_inferior_data): Rewrite.
779 (struct jit_objfile_data): New.
780 (get_jit_objfile_data): New function.
781 (add_objfile_entry): Update.
782 (jit_read_descriptor): Return int. Replace descriptor_addr
783 argument with inf_data. Update. Don't call error.
784 (jit_breakpoint_re_set_internal): Reorder logic. Update. Look up
786 (jit_inferior_init): Don't look up descriptor. Don't call error.
787 (jit_reset_inferior_data_and_breakpoints)
788 (jit_inferior_created_observer): Remove.
789 (jit_inferior_exit_hook): Update.
790 (jit_executable_changed_observer): Remove.
791 (jit_event_handler): Update.
792 (free_objfile_data): Reset inferior data if needed.
793 (_initialize_jit): Update.
795 2012-02-01 Tom Tromey <tromey@redhat.com>
797 * jit.c (bfd_open_from_target_memory): Move higher in file.
799 2012-02-01 Tristan Gingold <gingold@adacore.com>
801 * libunwind-frame.c (libunwind_load): Display message if dlopen
804 2012-02-01 Gary Benson <gbenson@redhat.com>
806 * symtab.h (symbol_name_match_p_ftype): New typedef.
807 (iterate_over_symbols): Use the above.
808 * symtab.c (iterate_over_symbols): Likewise.
809 * language.h (language_defn->la_iterate_over_symbols): Likewise.
810 * ada-lang.c (ada_iterate_over_symbols): Likewise.
811 * linespec.c (iterate_over_all_matching_symtabs): Likewise.
812 (iterate_name_matcher): Document return values.
813 (collect_one_symbol): Likewise.
814 (collect_function_symbols): Likewise.
815 (collect_symbols): Likewise.
817 2012-02-01 Tom Tromey <tromey@redhat.com>
819 * ada-lang.c (resolve_subexp): Update.
820 (ada_lookup_symbol_list): Add 'full_search' argument.
821 (ada_iterate_over_symbols): Pass 0 as full_search argument to
822 ada_lookup_symbol_list.
823 (ada_lookup_encoded_symbol): Update.
824 (get_var_value): Update.
825 * ada-exp.y (block_lookup): Update.
826 (write_var_or_type): Update.
827 (write_name_assoc): Update.
828 * ada-lang.h (ada_lookup_symbol_list): Update.
830 2012-01-31 Tom Tromey <tromey@redhat.com>
832 * language.h (struct language_defn) <la_iterate_over_symbols>: Fix
835 2012-01-31 Doug Evans <dje@google.com>
837 * symtab.h: Remove outdated comment.
838 (SYMBOL_MATCHES_NATURAL_NAME): Delete.
840 2012-02-01 Josh Matthews <josh@joshmatthews.net> (tiny change)
842 Fix build error in Darwin port.
843 * i386-darwin-nat.c: Include i386-nat.h.
845 2012-01-30 Tom Tromey <tromey@redhat.com>
847 PR breakpoints/13568:
848 * dwarf2read.c (dwarf_decode_macro_bytes): Add 'include_hash'
849 argument. Check for recursive includes.
850 (dwarf_decode_macros): Create an include hash.
852 2012-01-30 Michael Eager <eager@eagercon.com>
854 * configure.tgt (powerpc-*-linux*): Add glibc-tdep.o.
855 * ppc-linux-tdep.c: Include glibc-tdep.h.
856 (powerpc32_plt_stub, powerpc32_plt_stub_so): Add PLT stub templates.
857 (powerpc_linux_in_plt_stub): New function.
858 (powerpc_linux_in_dynsym_resolve_code): New function.
859 (ppc_skip_trampoline_code): New function.
860 (ppc_linux_init_abi): Use PPC specific functions rather than generic.
861 Use glibc_skip_solib_resolver.
863 2012-01-28 Jan Kratochvil <jan.kratochvil@redhat.com>
865 Code cleanup: Make 1440 bytes of data segment read-only.
866 * arch-utils.c (endian_enum): Make it const char *const [].
867 * arm-tdep.c (fp_model_strings, arm_abi_strings, arm_mode_strings):
869 * breakpoint.c (always_inserted_enums): Likewise.
870 * cli/cli-cmds.c (script_ext_enums): Likewise.
871 * cli/cli-decode.c (add_setshow_enum_cmd, complete_on_enum): Make the
872 enumlist parameter const char *const *.
873 * cli/cli-decode.h (struct cmd_list_element): Make the enums field
875 * command.h (complete_on_enum, add_setshow_enum_cmd): Make the enumlist
876 parameter const char *const *.
877 * cris-tdep.c (cris_modes): Make it const char *const [].
878 * filesystem.c (target_file_system_kinds): Likewise.
879 * i386-tdep.c (valid_flavors, valid_conventions): Likewise.
880 * infrun.c (follow_fork_mode_kind_names, follow_exec_mode_names)
881 (can_use_displaced_stepping_enum, scheduler_enums)
882 (exec_direction_names): Likewise.
883 * language.c (_initialize_language): Make the type_or_range_names and
884 case_sensitive_names variables const char *const [].
885 * mips-tdep.c (mips_abi_strings): Make it const char *const [].
886 * python/python.c (python_excp_enums): Likewise.
887 * remote.c (interrupt_sequence_modes): Likewise.
888 * rs6000-tdep.c (powerpc_vector_strings): Likewise.
889 * serial.c (logbase_enums): Likewise.
890 * sh-tdep.c (sh_cc_enum): Likewise.
891 * stack.c (print_frame_arguments_choices, print_entry_values_choices):
893 * symtab.c (multiple_symbols_modes): Likewise.
894 * tui/tui-win.c (tui_border_kind_enums, tui_border_mode_enums):
896 * utils.c (internal_problem_modes): Likewise.
898 2012-01-27 Jan Kratochvil <jan.kratochvil@redhat.com>
900 Fix the 2012-01-26 regression by la_get_symbol_name_match_p.
901 * linespec.c (iterate_name_matcher): Negate the SYMBOL_NAME_MATCH_P
904 2012-01-27 Doug Evans <dje@google.com>
906 * configure.ac (with_python): Fix absolute path handling for win32.
907 * configure: Regenerate.
909 2012-01-26 Doug Evans <dje@google.com>
911 * symtab.c: Whitespace cleanup, no code changes.
913 * symtab.c (lookup_symbol_in_language): Improve comment.
914 (lookup_symbol_aux): Fix comment.
916 * psymtab.c (add_psymbol_to_list): Result is now "void".
917 * psympriv.h (add_psymbol_to_list): Update.
919 * dwarf2read.c (add_partial_symbol): Delete local psym, unused.
921 2012-01-26 Jan Kratochvil <jan.kratochvil@redhat.com>
923 Do not open script filenames twice.
924 * cli/cli-cmds.c (source_script_from_stream): Pass to
925 source_python_script also STREAM.
926 * python/py-auto-load.c (source_section_scripts): Pass to
927 source_python_script_for_objfile also STREAM.
928 (auto_load_objfile_script): Pass to source_python_script_for_objfile
930 * python/python-internal.h (source_python_script_for_objfile): New
931 parameter file, rename parameter file to filename.
932 * python/python.c (python_run_simple_file): Call PyRun_SimpleFile
933 instead if !_WIN32. Update the function comment.
934 (source_python_script, source_python_script_for_objfile)
935 (source_python_script): New parameter file, rename parameter file to
936 filename. Pass FILENAME to python_run_simple_file.
937 * python/python.h (source_python_script): New parameter file, rename
938 parameter file to filename.
940 2012-01-26 Pedro Alves <palves@redhat.com>
942 * corelow.c (core_has_fake_pid): Delete.
943 (core_close): Delete references to `core_has_fake_pid'.
944 (add_to_thread_list): Adjust to mark the inferior's pid as fake.
945 (core_open): Delete references to `core_has_fake_pid'.
946 (core_pid_to_str): Adjust to check inferior->fake_pid_p instead of
949 2012-01-26 Joel Brobecker <brobecker@adacore.com>
951 * symfile.h (struct quick_symbol_functions) [expand_symtabs_matching]:
952 Remove language parameter from name_matcher. Adjust the comment.
953 * symtab.c (search_symbols_name_matches, expand_partial_symbol_name):
954 Remove language parameter.
955 * ada-lang.c (ada_expand_partial_symbol_name): Likewise.
956 * linespec.c (iterate_name_matcher): Likewise.
957 * dwarf2read.c (dw2_expand_symtabs_matching): Adjust type of
958 name_matcher. Adjust call accordingly.
959 * psymtab.c (expand_symtabs_matching_via_partial): Likewise.
960 (maintenance_check_symtabs): Adjust type of parameter "fun".
961 * psymtab.h (maintenance_check_symtabs): Likewise.
963 2012-01-26 Joel Brobecker <brobecker@adacore.com>
965 * language.h (symbol_name_match_p_ftype): New typedef.
966 (struct language_defn): Replace field la_symbol_name_compare
967 by la_get_symbol_name_match_p.
968 * ada-lang.c (ada_get_symbol_name_match_p): New function.
969 (ada_language_defn): Use it.
970 * linespec.c (struct symbol_matcher_data): New type.
971 (iterate_name_matcher): Rewrite.
972 (iterate_over_all_matching_symtabs): Pass a pointer to
973 a symbol_matcher_data struct to expand_symtabs_matching
974 instead of just the lookup name.
975 * c-lang.c, d-lang.c, jv-lang.c, m2-lang.c, objc-lang.c,
976 opencl-lang.c, p-lang.c, language.c: Delete field
977 la_symbol_name_compare, and replace by NULL for new field
978 la_get_symbol_name_match_p.
979 * symfile.h (struct quick_symbol_functions): Update comment.
981 2012-01-25 Tom Tromey <tromey@redhat.com>
983 * breakpoint.c (bpstat_stop_status): Check 'breakpoint_at' before
986 2012-01-24 Tom Tromey <tromey@redhat.com>
989 * solib.c (update_solib_list): Update the program space's
990 added_solibs and deleted_solibs fields.
991 * progspace.h (struct program_space) <added_solibs,
992 deleted_solibs>: New fields.
993 (clear_program_space_solib_cache): Declare.
994 * progspace.c (release_program_space): Call
995 clear_program_space_solib_cache.
996 (clear_program_space_solib_cache): New function.
997 * infrun.c (handle_inferior_event) <TARGET_WAITKIND_LOADED>: Call
998 bpstat_stop_status. Use handle_solib_event.
999 * breakpoint.c: Include gdb_regex.h.
1000 (print_solib_event): New function.
1001 (bpstat_print): Use print_solib_event.
1002 (bpstat_stop_status): Add special case for bp_shlib_event.
1003 (handle_solib_event): New function.
1004 (bpstat_what): Use handle_solib_event.
1005 (struct solib_catchpoint): New.
1006 (dtor_catch_solib, insert_catch_solib, remove_catch_solib)
1007 (breakpoint_hit_catch_solib, check_status_catch_solib)
1008 (print_it_catch_solib, print_one_catch_solib)
1009 (print_mention_catch_solib, print_recreate_catch_solib): New
1011 (catch_solib_breakpoint_ops): New global.
1012 (catch_load_or_unload, catch_load_command_1)
1013 (catch_unload_command_1): New functions.
1014 (internal_bkpt_check_status): Add special case for
1016 (internal_bkpt_print_it): Use print_solib_event.
1017 (initialize_breakpoint_ops): Initialize
1018 catch_solib_breakpoint_ops.
1019 (_initialize_breakpoint): Register "catch load" and "catch
1021 * breakpoint.h (handle_solib_event): Declare.
1022 * NEWS: Add entry for "catch load" and "catch unload".
1024 2012-01-24 Tom Tromey <tromey@redhat.com>
1026 * ada-lang.c: Include gdb_vecs.h.
1027 * charset.c: Include gdb_vecs.h.
1028 * tracepoint.h: Include gdb_vecs.h.
1029 * gdb_vecs.h: New file.
1031 2012-01-24 Pedro Alves <pedro@codesourcery.com>
1033 * breakpoint.c (breakpoint_hit_catch_fork)
1034 (breakpoint_hit_catch_vfork, breakpoint_hit_catch_syscall)
1035 (breakpoint_hit_catch_exec): Make use of the `ws' argument.
1036 * infrun.c (inferior_has_forked, inferior_has_vforked)
1037 (inferior_has_execd, inferior_has_called_syscall): Delete.
1038 (handle_syscall_event): Get syscall_number from the execution
1039 control state's wait status.
1040 (wait_for_inferior): Don't clear syscall_number.
1042 2012-01-24 Pedro Alves <palves@redhat.com>
1044 * breakpoint.c (bpstat_check_location, bpstat_stop_status,
1045 pc_at_non_inline_function): Add `ws' parameter, and pass it down.
1046 (breakpoint_hit_catch_fork, breakpoint_hit_catch_vfork)
1047 (breakpoint_hit_catch_syscall, breakpoint_hit_catch_exec): Add
1049 (breakpoint_hit_ranged_breakpoint): Add `ws' parameter. Return
1050 false for events other than TARGET_SIGNAL_TRAP.
1051 (breakpoint_hit_watchpoint, base_breakpoint_breakpoint_hit):
1053 (bkpt_breakpoint_hit): Add `ws' parameter. Return false for
1054 events other than TARGET_SIGNAL_TRAP.
1055 (tracepoint_breakpoint_hit): Add `ws' parameter.
1056 * breakpoint.h (struct breakpoint_ops) <breakpoint_hit>: Add `ws'
1058 (bpstat_stop_status): Same.
1059 (pc_at_non_inline_function): Same.
1060 * infrun.c (handle_syscall_event, handle_inferior_event): Adjust
1061 to pass the current event's waitstatus to bpstat_stop_status
1062 and pc_at_non_inline_function.
1064 2012-01-24 Jan Kratochvil <jan.kratochvil@redhat.com>
1067 * cli/cli-cmds.c (source_script_from_stream): Never fclose STREAM.
1068 Update the function comment for it.
1069 (source_script_with_search): Call make_cleanup_fclose for STREAM.
1070 * cli/cli-script.c (script_from_file): Do not call make_cleanup_fclose
1073 2012-01-24 Pedro Alves <palves@redhat.com>
1075 * breakpoint.c (bpstat_stop_status): Moving clearing print_it
1076 outside `bs->stop' block.
1077 (bpstat_what): Rework bp_shlib_event handling.
1078 (internal_bkpt_check_status): If the breakpoint is a
1079 bp_shlib_event, then set bs->stop and bs->print if
1080 stop_on_solib_events is set.
1082 2012-01-24 Gary Benson <gbenson@redhat.com>
1084 Delete #if 0'd out code.
1085 * stack.c (print_frame_label_vars): Remove.
1086 (catch_info): Likewise.
1087 (_initialize_stack): Remove "info catch" command.
1088 * NEWS: Mention the above.
1090 2012-01-24 Pedro Alves <palves@redhat.com>
1092 * remote.c (remote_add_inferior): New `fake_pid_p' parameter. Use
1094 (remote_notice_new_inferior): If the remote end doesn't support
1095 the multiprocess extensions, then the PID is fake.
1096 (add_current_inferior_and_thread): New.
1097 (remote_start_remote): Use it.
1098 (extended_remote_attach_1): Adjust.
1099 (extended_remote_create_inferior_1): Use
1100 add_current_inferior_and_thread.
1102 2012-01-24 Jan Kratochvil <jan.kratochvil@redhat.com>
1104 Fix watchpoints to be specific for each inferior.
1105 * breakpoint.c (watchpoint_in_thread_scope): Verify also
1106 current_program_space.
1107 * i386-nat.c (i386_inferior_data_cleanup): New.
1108 (i386_inferior_data_get): Replace variable inf_data_local by an
1110 (i386_use_watchpoints): Initialize i386_inferior_data.
1111 * linux-nat.c (linux_nat_iterate_watchpoint_lwps): Use INFERIOR_PTID
1112 specific iterate_over_lwps.
1114 2012-01-24 Jan Kratochvil <jan.kratochvil@redhat.com>
1116 Fix watchpoints across inferior fork.
1117 * amd64-linux-nat.c (update_debug_registers_callback): Update the
1118 comment for linux_nat_iterate_watchpoint_lwps.
1119 (amd64_linux_dr_set_control, amd64_linux_dr_set_addr): Use
1120 linux_nat_iterate_watchpoint_lwps.
1121 (amd64_linux_prepare_to_resume): New comment on Linux kernel.
1122 * i386-linux-nat.c (update_debug_registers_callback): Update the
1123 comment for linux_nat_iterate_watchpoint_lwps.
1124 (i386_linux_dr_set_control, i386_linux_dr_set_addr): Use
1125 linux_nat_iterate_watchpoint_lwps.
1126 (i386_linux_prepare_to_resume): New comment on Linux kernel.
1127 * i386-nat.c: Include inferior.h.
1128 (dr_mirror): Remove.
1129 (i386_inferior_data, struct i386_inferior_data)
1130 (i386_inferior_data_get): New.
1131 (i386_debug_reg_state): Use i386_inferior_data_get.
1132 (i386_cleanup_dregs, i386_update_inferior_debug_regs)
1133 (i386_insert_watchpoint, i386_remove_watchpoint)
1134 (i386_stopped_data_address, i386_insert_hw_breakpoint)
1135 (i386_remove_hw_breakpoint): New variable state, use
1136 i386_debug_reg_state instead of DR_MIRROR.
1137 * linux-nat.c (delete_lwp): New declaration.
1138 (num_lwps): Move here from downwards.
1139 (delete_lwp_cleanup): New.
1140 (linux_child_follow_fork): Create new child_lp, call
1141 linux_nat_new_thread and linux_nat_prepare_to_resume before calling
1143 (num_lwps): Move upwards.
1144 (linux_nat_iterate_watchpoint_lwps): New.
1145 * linux-nat.h (linux_nat_iterate_watchpoint_lwps_ftype): New.
1146 (linux_nat_iterate_watchpoint_lwps_ftype): New declaration.
1148 2012-01-24 Joel Brobecker <brobecker@adacore.com>
1152 2012-01-23 Pedro Alves <palves@redhat.com>
1154 * top.c (caution): Rename to ...
1155 (confirm): ... this.
1156 (show_caution): Rename to ...
1157 (show_confirm): ... this.
1158 (quit_cover): Adjust.
1159 (init_main): Adjust.
1160 * top.h (caution): Rename to ...
1161 (confirm): ... this.
1162 * utils.c (internal_vproblem, defaulted_query): Adjust.
1164 2012-01-23 Pedro Alves <palves@redhat.com>
1166 * top.c (caution): Update comment.
1167 (execute_command): Don't consider the current value of `caution'.
1169 2012-01-23 Jan Kratochvil <jan.kratochvil@redhat.com>
1171 * cli/cli-cmds.c (find_and_open_script): Handle failure of fdopen.
1173 2012-01-23 Ulrich Weigand <ulrich.weigand@linaro.org>
1175 * inf-child.c: Include "gdb_stat.h" instead of <sys/stat.h>.
1176 * linux-tdep.c (linux_info_proc): Avoid ARI coding style warning.
1177 * target.c (target_fileio_pwrite): Remove buffer address from
1179 (target_fileio_pread): Likewise.
1181 2012-01-20 Ulrich Weigand <ulrich.weigand@linaro.org>
1183 * NEWS: Document remote "info proc" and "generate-core-file".
1185 2012-01-20 Ulrich Weigand <ulrich.weigand@linaro.org>
1187 * gdbarch.sh (find_memory_regions): New callback.
1188 * gdbarch.c, gdbarch.h: Regenerate.
1190 * gcore.c (gcore_memory_sections): Try gdbarch find_memory_regions
1191 callback before falling back to target method.
1193 * linux-nat.c (read_mapping, linux_nat_find_memory_regions): Remove.
1194 (linux_target_install_ops): No longer install it.
1196 * linux-tdep.c (linux_find_memory_regions): New function.
1197 (linux_init_abi): Install it.
1199 2012-01-20 Ulrich Weigand <ulrich.weigand@linaro.org>
1201 * gdbarch.sh (make_corefile_notes): New architecture callback.
1202 * gdbarch.c: Regenerate.
1203 * gdbarch.h: Likewise.
1205 * gcore.c (write_gcore_file): Try gdbarch_make_corefile_notes
1206 before target_make_corefile_notes. If NULL is returned, the
1207 target does not support core file generation.
1209 * linux-nat.c: Include "linux-tdep.h".
1210 (find_signalled_thread, find_stop_signal): Remove.
1211 (linux_nat_do_thread_registers): Likewise.
1212 (struct linux_nat_corefile_thread_data): Likewise.
1213 (linux_nat_corefile_thread_callback): Likewise.
1214 (iterate_over_spus): Likewise.
1215 (struct linux_spu_corefile_data): Likewise.
1216 (linux_spu_corefile_callback): Likewise.
1217 (linux_spu_make_corefile_notes): Likewise.
1218 (linux_nat_collect_thread_registers): New function.
1219 (linux_nat_make_corefile_notes): Replace contents by call to
1220 linux_make_corefile_notes passing linux_nat_collect_thread_registers
1221 as native-only callback.
1223 * linux-tdep.h: Include "bfd.h".
1224 (struct regcache): Add forward declaration.
1225 (linux_collect_thread_registers_ftype): New typedef.
1226 (linux_make_corefile_notes): Add prototype.
1227 * linux-tdep.c: Include "gdbthread.h", "gdbcore.h", "regcache.h",
1228 "regset.h", and "elf-bfd.h".
1229 (find_signalled_thread, find_stop_signal): New functions.
1230 (linux_spu_make_corefile_notes): Likewise.
1231 (linux_collect_thread_registers): Likewise.
1232 (struct linux_corefile_thread_data): New data structure.
1233 (linux_corefile_thread_callback): New funcion.
1234 (linux_make_corefile_notes): Likewise.
1235 (linux_make_corefile_notes_1): Likewise.
1236 (linux_init_abi): Install it.
1238 2012-01-20 Ulrich Weigand <ulrich.weigand@linaro.org>
1240 * gdbarch.sh (info_proc): New callback.
1241 * gdbarch.c, gdbarch.h: Regenerate.
1243 * infcmd.c (info_proc_cmd_1): Try gdbarch info_proc callback
1244 before falling back to the target info_proc callback.
1246 * linux-nat.c: Do not include "cli/cli-utils.h".
1247 (linux_nat_info_proc): Remove.
1248 (linux_target_install_ops): No longer install it.
1250 * linux-tdep.c: Include "cli/cli-utils.h" and <ctype.h>.
1251 (read_mapping): New function.
1252 (linux_info_proc): Likewise.
1253 (linux_init_abi): Install it.
1255 2012-01-20 Ulrich Weigand <ulrich.weigand@linaro.org>
1257 * defs.h (enum info_proc_what): Moved here from linux-nat.c
1258 * infcmd.c: (info_proc_cmd_1): New function.
1259 (info_proc_cmd): New function, moved here from equivalent routine
1260 orignally in linux-nat.c.
1261 (info_proc_cmd_mappings): Likewise.
1262 (info_proc_cmd_stat): Likewise.
1263 (info_proc_cmd_status): Likewise.
1264 (info_proc_cmd_cwd): Likewise.
1265 (info_proc_cmd_cmdline): Likewise.
1266 (info_proc_cmd_exe): Likewise.
1267 (info_proc_cmd_all): Likewise.
1268 (_initialize_infcmd): Install "info proc" command and subcommands.
1270 * target.h (struct target_ops): Add to_info_proc.
1271 (target_info_proc): Add prototype.
1272 * target.c (target_info_proc): New function.
1274 * procfs.c (procfs_info_proc): Add prototype.
1275 (info_proc_cmd): Rename into ...
1276 (procfs_info_proc): ... this. Update argument types as appropriate
1277 for a to_info_proc implementation. Handle "what" argument.
1278 (procfs_target): Install procfs_info_proc.
1279 (_initialize_procfs): No longer install "info proc" command.
1281 * linux-nat.c: (enum info_proc_what): Remove.
1282 (linux_nat_info_proc_cmd_1): Rename into ...
1283 (linux_nat_info_proc): ... this. Update argument types as appropriate
1284 for a to_info_proc implementation.
1285 (linux_nat_info_proc_cmd): Remove.
1286 (linux_nat_info_proc_cmd_mappings): Likewise.
1287 (linux_nat_info_proc_cmd_stat): Likewise.
1288 (linux_nat_info_proc_cmd_status): Likewise.
1289 (linux_nat_info_proc_cmd_cwd): Likewise.
1290 (linux_nat_info_proc_cmd_cmdline): Likewise.
1291 (linux_nat_info_proc_cmd_exe): Likewise.
1292 (linux_nat_info_proc_cmd_all): Likewise.
1293 (linux_target_install_ops): Install linux_nat_info_proc.
1294 (_initialize_linux_nat): No longer install "info proc" command
1297 2012-01-20 Ulrich Weigand <ulrich.weigand@linaro.org>
1299 * configure.ac [AC_CHECK_FUNCS]: Check for readlink.
1300 * config.in, configure: Regenerate.
1302 * target.h (struct target_ops): Add to_fileio_readlink.
1303 (target_fileio_readlink): Add prototype.
1304 * target.c (target_fileio_readlink): New function.
1306 * inf-child.c: Conditionally include <sys/param.h>.
1307 (inf_child_fileio_readlink): New function.
1308 (inf_child_target): Install it.
1310 * remote.c (PACKET_vFile_readlink): New enum value.
1311 (remote_hostio_readlink): New function.
1312 (init_remote_ops): Install it.
1313 (_initialize_remote): Handle vFile:readlink packet type.
1315 2012-01-20 Pedro Alves <palves@redhat.com>
1316 Ulrich Weigand <ulrich.weigand@linaro.org>
1318 * configure.ac [AC_CHECK_FUNCS]: Check for pread and pwrite.
1319 * config.in, configure: Regenerate.
1321 * target.h (struct target_ops): Add to_fileio_open, to_fileio_pwrite,
1322 to_fileio_pread, to_fileio_close, to_fileio_unlink.
1323 (target_fileio_open): Add prototype.
1324 (target_fileio_pwrite): Likewise.
1325 (target_fileio_pread): Likewise.
1326 (target_fileio_close): Likewise.
1327 (target_fileio_unlink): Likewise.
1328 (target_fileio_read_alloc): Likewise.
1329 (target_fileio_read_stralloc): Likewise.
1331 * target.c: Include "gdb/fileio.h".
1332 (target_read_stralloc): Accept trailing, but not embedded NUL bytes.
1333 (default_fileio_target): New function.
1334 (target_fileio_open): Likewise.
1335 (target_fileio_pwrite): Likewise.
1336 (target_fileio_pread): Likewise.
1337 (target_fileio_close): Likewise.
1338 (target_fileio_unlink): Likewise.
1339 (target_fileio_close_cleanup): Likewise.
1340 (target_fileio_read_alloc_1): Likewise.
1341 (target_fileio_read_alloc): Likewise.
1342 (target_fileio_read_stralloc): Likewise.
1344 * inf-child.c: Include "gdb/fileio.h", <sys/types.h>, <sys/stat.h>,
1345 <fcntl.h>, and <unistd.h>.
1346 (inf_child_fileio_open_flags_to_host): New function.
1347 (inf_child_errno_to_fileio_error): Likewise.
1348 (inf_child_fileio_open): Likewise.
1349 (inf_child_fileio_pwrite): Likewise.
1350 (inf_child_fileio_pread): Likewise.
1351 (inf_child_fileio_close): Likewise.
1352 (inf_child_fileio_unlink): Likewise.
1353 (inf_child_target): Install to_fileio routines.
1355 * remote.c (init_remote_ops): Install to_fileio routines.
1357 2012-01-20 Pedro Alves <palves@redhat.com>
1358 Ulrich Weigand <ulrich.weigand@linaro.org>
1360 * remote.c (remote_multi_process_p): Only check for multi-process
1361 protocol feature, do not check for extended protocol.
1362 (remote_supports_multi_process): Check for extended protocol here.
1363 (set_general_process): Likewise.
1364 (extended_remote_kill): Likewise.
1365 (remote_pid_to_str): Likewise.
1366 (remote_query_supported): Always query multiprocess mode.
1368 2012-01-20 Pedro Alves <palves@redhat.com>
1369 Ulrich Weigand <ulrich.weigand@linaro.org>
1371 * inferior.h (struct inferior): Add fake_pid_p.
1372 * inferior.c (exit_inferior_1): Clear fake_pid_p.
1373 * remote.c (remote_start_remote): Set fake_pid_p if we have to use
1374 magic_null_ptid since the remote side doesn't provide a real PID.
1376 2012-01-19 Tom Tromey <tromey@redhat.com>
1378 * NEWS: Combine the two Python sections.
1380 2012-01-19 Jan Kratochvil <jan.kratochvil@redhat.com>
1382 * target.h (target_close): Update comment on the target's unpush state.
1384 2012-01-19 Pedro Alves <palves@redhat.com>
1386 * linux-nat.c (linux_nat_close): Call linux_nat_is_async_p and
1387 linux_nat_async directly instead of going through the target
1389 * target.c (unpush_target): Close target after unpushing it, not
1392 2012-01-19 Gary Benson <gbenson@redhat.com>
1394 * mdebugread.c (sort_blocks): Replace integer constants with ones
1395 derived from FIRST_LOCAL_BLOCK.
1397 2012-01-18 Paul Pluzhnikov <ppluzhnikov@google.com>
1398 Jan Kratochvil <jan.kratochvil@redhat.com>
1401 * symfile.c (find_separate_debug_file): New function.
1402 (terminate_after_last_dir_separator): Likewise.
1403 (find_separate_debug_file_by_debuglink): Also try realpath.
1404 * configure.ac (AC_CHECK_FUNCS): Add lstat.
1405 * configure: Regenerate.
1406 * config.in: Regenerate.
1408 2012-01-18 Doug Evans <dje@google.com>
1410 * Makefile.in (TARGET_SYSTEM_ROOT, TARGET_SYSTEM_ROOT_DEFINE): Delete.
1411 (main.o): Remove rule.
1412 * configure.ac (BINDIR): Define with AC_DEFINE_DIR.
1413 (--with-sysroot): Rewrite.
1414 * configure: Regenerate.
1415 * config.in: Regenerate.
1417 2012-01-18 Sergio Durigan Junior <sergiodj@redhat.com>
1419 * parse.c (initialize_expout): New function.
1420 (reallocate_expout): Likewise.
1421 (parse_exp_in_context): Use `initialize_expout' and
1422 `reallocate_expout' when appropriate.
1424 2012-01-18 Pedro Alves <palves@redhat.com>
1426 * record.c (struct record_breakpoint, record_breakpoint_p)
1427 (record_breakpoints): New.
1428 (record_insert_breakpoint, record_remove_breakpoint): Manage
1429 record breakpoints list. Only remove breakpoints from the
1430 inferior if they had been inserted there in the first place.
1432 2012-01-17 Doug Evans <dje@google.com>
1434 * linespec.c (decode_line_internal): Don't call symtabs_from_filename
1435 if we know we don't have a file name to look for.
1437 2012-01-17 Pedro Alves <palves@redhat.com>
1439 * dwarf2-frame.c (dwarf2_frame_cfa): Throw NOT_AVAILABLE_ERROR, if
1440 the frame's stop reason is UNWIND_UNAVAILABLE.
1442 2012-01-17 Jan Kratochvil <jan.kratochvil@redhat.com>
1444 Fix compilation error.
1445 * m2-exp.y (yyerror): Use ANSI C prototype.
1447 2012-01-16 Sergio Durigan Junior <sergiodj@redhat.com>
1449 * f-exp.y (parse_number): Convert prototype from K&R to ANSI C.
1450 (growbuf_by_size): Likewise.
1451 (yyerror): Likewise.
1452 * m2-exp.y (make_qualname): Remove function (was #if 0'ed).
1453 (modblock): Remove variable (was #if 0'ed).
1454 (parse_number): Convert prototype from K&R to ANSI C.
1455 (yyerror): Likewise.
1456 * objc-exp.y (parse_number): Likewise.
1457 (yyerror): Likewise.
1458 (yylex): Remove #if 0'ed code.
1459 * p-exp.y (uptok): Convert prototype from K&R to ANSI C.
1460 (yyerror): Likewise.
1462 2012-01-16 Tom Tromey <tromey@redhat.com>
1465 * symtab.h (compare_filenames_for_search): Declare.
1466 * symtab.c (compare_filenames_for_search): New function.
1467 (iterate_over_some_symtabs): Use it.
1468 * symfile.h (struct quick_symbol_functions)
1469 <map_symtabs_matching_filename>: Change spec.
1470 * psymtab.c (partial_map_symtabs_matching_filename): Use
1471 compare_filenames_for_search. Update for new spec.
1472 * dwarf2read.c (dw2_map_symtabs_matching_filename): Use
1473 compare_filenames_for_search. Update for new spec.
1474 * breakpoint.c (clear_command): Use compare_filenames_for_search.
1476 2012-01-16 Tom Tromey <tromey@redhat.com>
1479 * gdbtypes.h (TYPE_FLAG_ENUM): New macro.
1480 (struct main_type) <flag_flag_enum>: New field.
1481 * dwarf2read.c (process_enumeration_scope): Detect "flag" enums.
1482 * NEWS: Add entries.
1483 * c-valprint.c (c_val_print) <TYPE_CODE_ENUM>: Handle "flag"
1485 * python/lib/gdb/printing.py (_EnumInstance): New class.
1486 (FlagEnumerationPrinter): Likewise.
1488 2012-01-16 Sergio Durigan Junior <sergiodj@redhat.com>
1490 * breakpoint.c (create_sals_from_address_default): New function.
1491 (create_breakpoints_sal_default): Likewise.
1492 (decode_linespec_default): Likewise.
1493 (is_marker_spec): Removed.
1494 (strace_marker_p): New function.
1495 (init_breakpoint_sal): Using `strace_marker_p' instead of
1497 (create_breakpoint): Call method `create_sals_from_address' from
1498 breakpoint_ops, replacing code that created SALs conditionally
1499 on the type of the breakpoint. Call method `create_breakpoints_sal',
1500 replacing code that created breakpoints conditionally on the type
1502 (base_breakpoint_create_sals_from_address): New function.
1503 (base_breakpoint_create_breakpoints_sal): Likewise.
1504 (base_breakpoint_decode_linespec): Likewise.
1505 (base_breakpoint_ops): Add methods
1506 `base_breakpoint_create_sals_from_address',
1507 `base_breakpoint_create_breakpoints_sal' and
1508 `base_breakpoint_decode_linespec'.
1509 (bkpt_create_sals_from_address): New function.
1510 (bkpt_create_breakpoints_sal): Likewise.
1511 (bkpt_decode_linespec): Likewise.
1512 (tracepoint_create_sals_from_address): Likewise.
1513 (tracepoint_create_breakpoints_sal): Likewise.
1514 (tracepoint_decode_linespec): Likewise.
1515 (strace_marker_create_sals_from_address): Likewise.
1516 (strace_marker_create_breakpoints_sal): Likewise.
1517 (strace_marker_decode_linespec): Likewise.
1518 (strace_marker_breakpoint_ops): New variable.
1519 (addr_string_to_sals): Remove `marker_spec'. Call method
1520 `decode_linespec' from breakpoint_ops, replacing code that decoded
1521 an address string into a SAL. Use `strace_marker_p' instead of
1523 (strace_command): Decide whether we are dealing with a static
1524 tracepoint with marker or not. Use the appropriate breakpoint_ops.
1525 (initialize_breakpoint_ops): Initialize new fields of breakpoint_ops.
1526 * breakpoint.h (linespec_result, linespec_sals): New forward
1528 (breakpoint_ops) <create_sals_from_address>,
1529 <create_breakpoints_sal>, <decode_linespec>: New methods.
1531 2012-01-14 Doug Evans <dje@google.com>
1533 * NEWS: Update text for "maint set python print-stack".
1534 It is deprecated in gdb 7.4 and deleted in 7.5.
1536 2012-01-13 Eli Zaretskii <eliz@gnu.org>
1538 * gdb_curses.h (MOUSE_MOVED) [__MINGW32__]: Undefine before
1541 2012-01-12 Jan Kratochvil <jan.kratochvil@redhat.com>
1543 * configure: Regenerate.
1544 * config.in: Regenerate.
1546 2012-01-12 Keith Seitz <keiths@redhat.com>
1549 * varobj.c (ANONYMOUS_STRUCT_NAME): Define.
1550 (ANONYMOUS_UNION_NAME): Define.
1551 (is_path_expr_parent): New function.
1552 (get_path_expr_parent): New function.
1553 (is_anonymous_child): New function.
1554 (create_child_with_value): If the child is anonymous and without
1555 a name, assign an object name to it.
1556 (c_describe_child): Use get_path_expr_parent to determine
1557 the parent expression.
1558 If there field represents an anonymous struct or union and
1559 has no name, set an appropriate display name and expression.
1560 (cplus_describe_child): Likewise.
1562 2012-01-12 Pedro Alves <palves@redhat.com>
1564 * i386-tdep.c (i386_frame_cache_1): Also mark the frame base as
1565 available when %ebp is found to be zero (outermost).
1567 2012-01-11 Andreas Tobler <andreast@fgznet.ch>
1569 * common/gdb_assert.h (gdb_static_assert): Rename static_assert to
1570 an internal gdb_static_assert.
1571 * mi/mi-common.c: Rename static_assert to gdb_static_assert.
1573 2012-01-11 Tom Tromey <tromey@redhat.com>
1576 * breakpoint.c (_initialize_breakpoint): Fix help for "catch
1577 catch" and "catch throw".
1579 2012-01-11 Paul Hilfinger <hilfingr@adacore.com>
1581 * blockframe.c (block_innermost_frame): Start search from selected
1582 frame, if present, or otherwise the current frame.
1584 * c-exp.y (variable): Update innermost_block for
1585 'block COLONCOLON NAME' clause.
1586 * m2-exp.y (variable): Ditto.
1587 * objc-exp.y (variable): Ditto.
1589 2012-01-10 Tom Tromey <tromey@redhat.com>
1592 * python/python.c (finish_python_initialization): Set sys.argv.
1594 2012-01-10 Doug Evans <dje@google.com>
1596 * dwarf2read.c (dwarf_decode_lines): Remove arg "abfd". New arg
1597 "want_line_info". All callers updated.
1598 (dwarf_decode_lines_1): New function.
1599 (handle_DW_AT_stmt_list): Add function comment.
1600 New arg "want_line_info". All callers updated.
1601 (read_file_scope,read_type_unit_scope): Move comment from
1602 handle_DW_AT_stmt_list to here.
1604 2012-01-10 Jan Kratochvil <jan.kratochvil@redhat.com>
1606 Fix regression after libiberty/ update for GCC PR 6057 and others.
1607 * c-exp.y (operator) <OPERATOR DELETE>
1608 (operator) <OPERATOR DELETE '[' ']'>: Add trailing space.
1609 * cp-name-parser.y (fill_comp, make_operator, make_dtor)
1610 (make_builtin_type, make_name): New variable i, add gdb_assert.
1611 (operator) <OPERATOR NEW>: Update ARGS to 3.
1612 (operator) <OPERATOR DELETE>: Add trailing space.
1613 (operator) <OPERATOR NEW '[' ']'>: Update ARGS to 3.
1614 (operator) <OPERATOR DELETE '[' ']'>: Add trailing space.
1615 * cp-support.c (cp_canonicalize_string): Check NULL from
1616 cp_comp_to_string, call warning and return.
1618 2012-01-10 Jan Kratochvil <jan.kratochvil@redhat.com>
1620 Fix duplicate .o files after omitting libbfd.a.
1621 * Makefile.in (ALL_TARGET_OBS): Remove corelow.o.
1622 (SFILES): Add corelow.c.
1623 (COMMON_OBS): Add corelow.o.
1624 (ALLDEPFILES): Remove corelow.c.
1625 * config/alpha/alpha-linux.mh (NATDEPFILES): Remove corelow.o.
1626 * config/alpha/alpha-osf3.mh: Likewise.
1627 * config/alpha/fbsd.mh: Likewise.
1628 * config/arm/nbsdaout.mh: Likewise.
1629 * config/arm/nbsdelf.mh: Likewise.
1630 * config/i386/i386gnu.mh: Likewise.
1631 * config/ia64/hpux.mh: Likewise.
1632 * config/ia64/linux.mh: Likewise.
1633 * config/m32r/linux.mh: Likewise.
1634 * config/m68k/linux.mh: Likewise.
1635 * config/mips/irix5.mh: Likewise.
1636 * config/mips/irix6.mh: Likewise.
1637 * config/pa/hpux.mh: Likewise.
1638 * config/pa/linux.mh: Likewise.
1639 * config/powerpc/aix.mh: Likewise.
1640 * config/sparc/linux.mh: Likewise.
1641 * config/sparc/linux64.mh: Likewise.
1642 * config/sparc/sol2.mh: Likewise.
1643 * config/vax/vax.mh: Likewise.
1644 * configure.tgt (alpha*-*-freebsd* alpha*-*-kfreebsd*-gnu)
1645 (alpha*-*-netbsd*, alpha*-*-knetbsd*-gnu, alpha*-*-openbsd*)
1646 (am33_2.0*-*-linux*, arm*-wince-pe, arm*-*-mingw32ce*, arm*-*-linux*)
1647 (arm*-*-openbsd*, cris*, frv-*-*, hppa*-*-hpux*, hppa*-*-netbsd*)
1648 (hppa*-*-openbsd*, i[34567]86-*-dicos*, i[34567]86-*-freebsd*)
1649 (i[34567]86-*-kfreebsd*-gnu, i[34567]86-*-netbsd*)
1650 (i[34567]86-*-knetbsd*-gnu, i[34567]86-*-openbsd*, i[34567]86-*-nto*)
1651 (i[34567]86-*-solaris2.1[0-9]*, x86_64-*-solaris2.1[0-9]*)
1652 (i[34567]86-*-solaris*, i[34567]86-*-linux*, i[34567]86-*-cygwin*)
1653 (i[34567]86-*-mingw32*, m68*-*-netbsd*, m68*-*-knetbsd*-gnu)
1654 (m68*-*-openbsd*, m88*-*-openbsd*, microblaze*-linux-*)
1655 (microblaze*-*-linux*, mips*-*-linux*, mips*-*-netbsd*)
1656 (mips*-*-knetbsd*-gnu, mips64*-*-openbsd*, powerpc-*-netbsd*)
1657 (powerpc-*-knetbsd*-gnu, powerpc-*-openbsd*, powerpc-*-linux*)
1658 (powerpc64-*-linux*, s390*-*-*, score-*-*, sh*-*-linux*)
1659 (sh*-*-netbsdelf*, sh*-*-knetbsd*-gnu, sh*-*-openbsd*)
1660 (sparc*-*-freebsd*, sparc*-*-kfreebsd*-gnu, sparc-*-netbsd*)
1661 (sparc-*-knetbsd*-gnu, sparc64-*-netbsd*, sparc64-*-knetbsd*-gnu)
1662 (sparc-*-openbsd*, sparc64-*-openbsd*, tic6x-*-*linux, vax-*-netbsd*)
1663 (vax-*-knetbsd*-gnu, vax-*-openbsd*, x86_64-*-dicos*, x86_64-*-linux*)
1664 (x86_64-*-freebsd*, x86_64-*-kfreebsd*-gnu, x86_64-*-netbsd*)
1665 (x86_64-*-knetbsd*-gnu, x86_64-*-openbsd*, xtensa*-*-linux*): Remove
1666 corelow.o from gdb_target_obs.
1667 * corefile.c (core_target): Update the comment on NULL value.
1668 (core_file_command): Replace error by gdb_assert on CORE_TARGET.
1669 * corelow.c (sniff_core_bfd): Call error instead of warning on zero
1670 MATCHES. Drop YUMMY set on NULL.
1671 (core_close): Do not call exit_inferior_silent on zero PID. Do not
1672 reclaim CORE_DATA if it is already NULL.
1674 2012-01-09 Doug Evans <dje@google.com>
1676 * gdbtypes.c (safe_parse_type): Initialize type to keep gcc happy.
1677 * varobj.c (varobj_set_value): Initialize val,value to keep gcc happy.
1679 2012-01-09 Keith Seitz <keiths@redhat.com>
1681 * breakpoint.c (wrapper.h): Don't include.
1683 2012-01-09 Keith Seitz <keiths@redhat.com>
1685 * Makefile.in (SFILES): Remove wrapper.c.
1686 (HFILES_NO_SRCDIR): Remove wrapper.h.
1687 (COMMON_OBS): Remove wrapper.o.
1688 * cli/cli-interp.c: Don't inlude wrapper.h.
1689 * corelow.c: Likewise.
1690 (core_open): Replace gdb_target_find_new_threads with
1691 TRY_CATCH around target_find_new_threads.
1692 * eval.c (fetch_subexp_value): Likewise for value_fetch_lazy.
1693 * gdbtypes.c (safe_parse_type): Likewise for parse_and_eval_type.
1694 * varobj.c (varobj_create): Likewise for parse_exp_1 and
1695 evaluate_expression.
1696 (varobj_set_value): Likewise for evaluate_expression and
1698 (install_new_variable): Likewise for value_fetch_lazy.
1699 (adjust_value_for_child_access): Likewise for value_ind.
1700 (c_describe_child): Likewise for value_subscript and
1702 (c_value_of_root): Likewise for evaluate_expression.
1703 * wrapper.c: Remove.
1704 * wrapper.h: Remove.
1706 2012-01-09 Doug Evans <dje@google.com>
1708 * dwarf2read.c (read_and_check_comp_unit_head): Renamed from
1709 partial_read_comp_unit_head. Replace "buffer", "buffer_size" and
1710 "abfd" args with "section". All callers updated.
1711 Error checking code moved ...
1712 (error_check_comp_unit_head): ... here. New function.
1713 (read_and_check_type_unit_head): Renamed from read_type_unit_head.
1714 Delete arg "abfd". New arg "type_offset". All callers updated.
1715 (create_debug_types_hash_table): Simplify by using
1716 read_and_check_type_unit_head.
1718 * parser-defs.h (namecopy): Delete.
1719 * parse.c (namecopy, namecopy_size): Move into copy_name.
1721 2012-01-09 Jan Kratochvil <jan.kratochvil@redhat.com>
1723 Partially fix duplicate .o files after omitting libbfd.a.
1724 * config/alpha/alpha-osf3.mh (NATDEPFILES): Remove solib.o.
1725 * config/i386/nbsdaout.mh (NATDEPFILES): Remove solib.o.
1726 * config/i386/obsdaout.mh (NATDEPFILES): Remove solib.o.
1727 * config/m68k/nbsdaout.mh (NATDEPFILES): Remove solib.o.
1728 * config/m68k/obsd.mh (NATDEPFILES): Remove solib.o.
1729 * config/powerpc/aix.mh (NATDEPFILES): Remove xcoffread.o.
1730 * config/vax/nbsdaout.mh (NATDEPFILES): Remove solib.o.
1732 2012-01-09 Pedro Alves <palves@redhat.com>
1734 * MAINTAINERS: Update my email address.
1736 2012-01-08 Doug Evans <dje@google.com>
1738 * dwarf2read.c (dwarf2_per_objfile): Rename n_type_comp_units to
1739 n_type_units. Rename type_comp_units to all_type_units.
1741 (add_signatured_type_cu_to_table): Renamed from
1742 add_signatured_type_cu_to_list. All callers updated.
1744 * gdbtypes.h (struct cplus_struct_type): Delete member
1745 nfn_fields_total. All uses removed.
1747 2012-01-06 Doug Evans <dje@google.com>
1749 * dwarf2read.c: Move FIXME from dwarf2_build_psymtabs_hard
1751 (dwarf2_find_comp_unit): Delete.
1752 (process_psymtab_comp_unit): Make result "void".
1753 Delete args buffer, info_ptr, buffer_size, and replace with
1754 "section". All callers updated.
1755 (dwarf2_build_psymtabs_hard): Simplify.
1757 2012-01-06 Sergio Durigan Junior <sergiodj@redhat.com>
1758 Thiago Jung Bauermann <bauerman@br.ibm.com>
1760 * ada-lang.c (ada_exception_name_addr): Add `volatile' keyword
1761 before `struct gdb_exception'.
1762 * breakpoint.c (update_global_location_list_nothrow)
1763 (update_breakpoint_locations, enable_breakpoint_disp): Likewise.
1764 * cp-abi.c (value_rtti_type): Likewise.
1765 * cp-support.c (cp_validate_operator): Likewise.
1766 * infrun.c (insert_exception_resume_breakpoint)
1767 (check_exception_resume, keep_going): Likewise.
1768 * mi-interp.c (mi_breakpoint_created)
1769 (mi_breakpoint_modified): Likewise.
1770 * rs6000-aix-tdep.c (rs6000_convert_from_func_ptr_addr): Likewise.
1771 * solib-ia64-hpux.c (ia64_hpux_at_dld_breakpoint_p)
1772 (ia64_hpux_handle_dld_breakpoint_1): Likewise.
1774 2012-01-05 Doug Evans <dje@google.com>
1776 * dwarf2read.c (statement_prologue): Delete, unused.
1778 * dwarf2read.c (dwarf2_per_cu_addr_size): Make result type an int.
1779 * dwarf2loc.h (dwarf2_per_cu_addr_size): Update.
1781 * dwarf2read.c (comp_unit_header): Delete, unused.
1783 2012-01-05 Ulrich Weigand <uweigand@de.ibm.com>
1785 * configure.tgt [s390*-*-*] (gdb_target_obs): Add corelow.o.
1786 * config/s390/s390.mh (NATDEPFILES): Remove corelow.o.
1788 2012-01-05 Khoo Yit Phang <khooyp@cs.umd.edu>
1790 * infrun.c (normal_stop): Don't skip calling the normal_stop
1791 observers if the thread was doing a multi-step, but stopped for
1792 some reason other than stepping.
1794 2012-01-05 Pedro Alves <alves.ped@gmail.com>
1796 * cli/cli-decode.h: Add comments.
1797 (CMD_LIST_AMBIGUOUS): Moved to command.h
1798 (add_cmd, add_alias_cmd, add_prefix_cmd, add_abbrev_prefix_cmd)
1799 (set_cmd_cfunc, set_cmd_sfunc, set_cmd_completer, cmd_cfunc_eq)
1800 (set_cmd_context, get_cmd_context, lookup_cmd, lookup_cmd_1)
1801 (deprecate_cmd, deprecated_cmd_warning, lookup_cmd_composition)
1802 (add_com, add_com_alias, add_info, add_info_alias)
1803 (complete_on_cmdlist, complete_on_enum, help_list): Remove
1805 * command.h: Add and adjust comments.
1806 (CMD_LIST_AMBIGUOUS): Moved here.
1807 (help_cmd, help_cmd_list): Delete declarations.
1809 2012-01-04 Doug Evans <dje@google.com>
1811 * dwarf2read.c (dwarf2_read_abbrevs): Delete arg "abfd".
1812 All callers updated.
1813 (load_full_type_unit): Renamed from read_signatured_type_at_offset.
1814 Replace all arguments with "per_cu". All callers updated.
1816 * dwarf2read.c (dwarf2_per_cu_data): Remove outdated comment.
1818 * dwarf2read.c (init_one_comp_unit): Delete arg "objfile".
1819 New arg "per_cu". All callers updated.
1821 Delete #if 0'd out code.
1822 * language.c (binop_result_type): Delete.
1823 (simple_type, ordered_type, same_type, integral_type): Delete.
1824 (numeric_type, character_type, string_type, boolean_type): Delete.
1825 (float_type, structured_type): Delete.
1826 * language.h: Update.
1828 2012-01-04 Tom Tromey <tromey@redhat.com>
1830 * python/py-value.c (valpy_binop): Initialize 'res_val'.
1832 2012-01-04 Joel Brobecker <brobecker@adacore.com>
1834 * corefile.c (close_exec_file): Delete.
1835 (reopen_exec_file): Remove commented out code that seems related
1836 to close_exec_file, which is being deleted here.
1837 * inferior.h (close_exec_file): Delete.
1838 * fork-child.c (fork_inferior): Remove call to fork_inferior.
1840 2012-01-04 Joel Brobecker <brobecker@adacore.com>
1842 * ada-lang.c: #include "cli/cli-utils.h".
1843 (get_selections): Use skip_spaces.
1844 (ada_get_next_arg): Use skip_spaces and skip_to_space.
1845 (catch_ada_exception_command_split): Use skip_spaces.
1846 (ada_decode_assert_location): Likewise.
1848 2012-01-04 Joel Brobecker <brobecker@adacore.com>
1850 * linespec.c (decode_line_internal): Check for C++ or Java
1851 compound constructs only if the current language is C, C++
1854 2012-01-04 Jan Kratochvil <jan.kratochvil@redhat.com>
1857 2012-01-02 Jan Kratochvil <jan.kratochvil@redhat.com>
1858 Joel Brobecker <brobecker@adacore.com>
1859 Fix regression for gdb.cp/gdb2495.exp with gcc-4.7.
1860 * arch-utils.c (displaced_step_at_entry_point): Incrase BP_LEN skip to
1862 * infcall.c (call_function_by_hand) <AT_SYMBOL>: Move it upwards and
1863 fall through into AT_ENTRY_POINT.
1864 (call_function_by_hand) <AT_ENTRY_POINT>: New variable bp_len. Adjust
1866 * ppc-linux-tdep.c (ppc_linux_displaced_step_location): Increase
1867 PPC_INSN_SIZE skip to 3 times.
1869 2012-01-04 Joel Brobecker <brobecker@adacore.com>
1871 * linespec.c (add_minsym): Preserve function descriptors.
1873 2012-01-04 Ulrich Weigand <uweigand@de.ibm.com>
1875 * breakpoint.c (all_locations_are_pending): Consider locations
1876 in program spaces executing during startup pending as well.
1878 2012-01-04 Joel Brobecker <brobecker@adacore.com>
1880 Copyright year update in most files of the GDB Project.
1882 2012-01-04 Joel Brobecker <brobecker@adacore.com>
1884 * copyright.sh: Delete.
1885 * copyright.py: Rewrite.
1887 2012-01-04 Joel Brobecker <brobecker@adacore.com>
1889 * gnulib/extra/update-copyright: New file, imported from gnulib.
1891 2012-01-04 Joel Brobecker <brobecker@adacore.com>
1893 * README (Copyright and License Notices): New section.
1895 2012-01-03 Tom Tromey <tromey@redhat.com>
1898 * python/py-value.c (valpy_dereference, valpy_get_address
1899 valpy_get_dynamic_type, valpy_lazy_string, valpy_do_cast)
1900 (valpy_getitem, valpy_call, valpy_binop, valpy_negative)
1901 (valpy_absolute, valpy_richcompare): Free intermediate values.
1903 2011-01-03 Joel Brobecker <brobecker@adacore.com>
1905 * ada-lang.c: Reformat the copyright notice.
1907 2012-01-02 Jan Kratochvil <jan.kratochvil@redhat.com>
1909 * Makefile.in (ALL_TARGET_OBS): Remove solib-target.o.
1910 * configure.tgt (arm*-wince-pe, arm*-*-mingw32ce*, arm*-*-symbianelf*)
1911 (i[34567]86-*-dicos*, i[34567]86-*-cygwin*, i[34567]86-*-mingw32*)
1912 (x86_64-*-dicos*, x86_64-*-mingw*): Remove solib-target.o.
1913 Revert this part of:
1914 2012-01-02 Jan Kratochvil <jan.kratochvil@redhat.com>
1915 Build gdb directly from *.o files not using libgdb.a.
1916 * Makefile.in (COMMON_OBS): Remove solib-target.o.
1918 2012-01-02 Joel Brobecker <brobecker@adacore.com>
1920 * gdb/common/gdb_thread_db.h, gdb/dbxread.c, gdb/environ.c,
1921 gdb/gcore.h, gdb/rs6000-tdep.h, gdb/s390-nat.c, gdb/tic6x-tdep.c:
1922 Reformat the copyright header.
1924 2012-01-02 Jan Kratochvil <jan.kratochvil@redhat.com>
1926 Revert this part of:
1927 2012-01-02 Jan Kratochvil <jan.kratochvil@redhat.com>
1928 Remove the gdbtui binary.
1929 * gdb.c (main): Remove args.interpreter_p initialization.
1930 * main.c (captured_main): Set INTERPRETER_P directly by INTERP_CONSOLE.
1931 * main.h (struct captured_main_args): Remove interpreter_p.
1933 2012-01-02 Joel Brobecker <brobecker@adacore.com>
1935 * config/djgpp/fnchange.lst: Add entry for ChangeLog-2011.
1937 2012-01-02 Joel Brobecker <brobecker@adacore.com>
1939 * top.c (print_gdb_version): Update copyright year.
1941 2012-01-02 Yao Qi <yao@codesourcery.com>
1943 * inf-ptrace.c (inf_ptrace_xfer_partial): Reindent.
1945 2012-01-02 Jan Kratochvil <jan.kratochvil@redhat.com>
1946 Joel Brobecker <brobecker@adacore.com>
1948 Fix regression for gdb.cp/gdb2495.exp with gcc-4.7.
1949 * arch-utils.c (displaced_step_at_entry_point): Incrase BP_LEN skip to
1951 * infcall.c (call_function_by_hand) <AT_SYMBOL>: Move it upwards and
1952 fall through into AT_ENTRY_POINT.
1953 (call_function_by_hand) <AT_ENTRY_POINT>: New variable bp_len. Adjust
1955 * ppc-linux-tdep.c (ppc_linux_displaced_step_location): Increase
1956 PPC_INSN_SIZE skip to 3 times.
1958 2012-01-02 Jan Kratochvil <jan.kratochvil@redhat.com>
1960 * amd64-linux-nat.c (update_debug_registers_callback): New comment on
1962 * i386-linux-nat.c (update_debug_registers_callback): Likewise.
1964 2012-01-02 Jan Kratochvil <jan.kratochvil@redhat.com>
1966 Build gdb directly from *.o files not using libgdb.a.
1967 * Makefile.in (SUBDIR_TUI_OBS): Remove duplicate tui.o.
1968 (COMMON_OBS): Remove solib-target.o.
1969 (LIBGDB_OBS, libgdb.a): Move it before the gdb$(EXEEXT) rule.
1970 (gdb$(EXEEXT)): Replace libgdb.a with $(LIBGDB_OBS).
1971 (LIBGDB_OBS, libgdb.a): Move it above.
1972 * configure.tgt (alpha*-*-linux*, alpha*-*-freebsd*)
1973 (alpha*-*-kfreebsd*-gnu, alpha*-*-netbsd*, alpha*-*-knetbsd*-gnu)
1974 (alpha*-*-openbsd*, am33_2.0*-*-linux*, arm*-wince-pe)
1975 (arm*-*-mingw32ce*, arm*-*-linux*, arm*-*-netbsd*, arm*-*-knetbsd*-gnu)
1976 (arm*-*-openbsd*, cris*, frv-*-*, hppa*-*-hpux*, hppa*-*-linux*)
1977 (hppa*-*-netbsd*, hppa*-*-openbsd*, i[34567]86-*-darwin*)
1978 (i[34567]86-*-dicos*, i[34567]86-*-freebsd*, i[34567]86-*-kfreebsd*-gnu)
1979 (i[34567]86-*-netbsd*, i[34567]86-*-knetbsd*-gnu, i[34567]86-*-openbsd*)
1980 (i[34567]86-*-nto*, i[34567]86-*-solaris2.1[0-9]*)
1981 (x86_64-*-solaris2.1[0-9]*, i[34567]86-*-solaris*, i[34567]86-*-linux*)
1982 (i[34567]86-*-gnu*, ia64-*-linux*, m32r*-*-linux*, m68*-*-linux*)
1983 (m68*-*-netbsd*, m68*-*-knetbsd*-gnu, m68*-*-openbsd*)
1984 (microblaze*-linux-*, microblaze*-*-linux*, mips*-sgi-irix5*)
1985 (mips*-sgi-irix6*, mips*-*-linux*, mips*-*-netbsd*)
1986 (mips*-*-knetbsd*-gnu, mips64*-*-openbsd*, powerpc-*-netbsd*)
1987 (powerpc-*-knetbsd*-gnu, powerpc-*-openbsd*, powerpc-*-aix*, rs6000-*-*)
1988 (powerpc-*-linux*, powerpc64-*-linux*, powerpc*-*-*, s390*-*-*)
1989 (sh*-*-linux*, sh*-*-netbsdelf*, sh*-*-knetbsd*-gnu, sh*-*-openbsd*)
1990 (sparc-*-linux*, sparc64-*-linux*, sparc*-*-freebsd*)
1991 (sparc*-*-kfreebsd*-gnu, sparc-*-netbsd*, sparc-*-knetbsd*-gnu)
1992 (sparc64-*-netbsd*, sparc64-*-knetbsd*-gnu, sparc-*-openbsd*)
1993 (sparc64-*-openbsd*, sparc-*-solaris2.[0-6], sparc-*-solaris2.[0-6].*)
1994 (sparc-*-solaris2*, sparcv9-*-solaris2*, sparc64-*-solaris2*)
1995 (vax-*-netbsd*, vax-*-knetbsd*-gnu, x86_64-*-darwin*, x86_64-*-dicos*)
1996 (x86_64-*-linux*, x86_64-*-freebsd*, x86_64-*-kfreebsd*-gnu)
1997 (x86_64-*-netbsd*, x86_64-*-knetbsd*-gnu, x86_64-*-openbsd*)
1998 (xtensa*-*-linux*, xtensa*): Remove solib.o from gdb_target_obs.
2000 2012-01-02 Jan Kratochvil <jan.kratochvil@redhat.com>
2002 Remove the gdbtui binary.
2003 * .gitignore (/gdbtui): Remove.
2004 * Makefile.in (TUI): Remove.
2005 (SUBDIR_TUI_OBS): Remove tui-main.o.
2006 (SUBDIR_TUI_SRCS): Remove tui/tui-main.c.
2007 (all-tui, install-tui, uninstall-tui, $(TUI)$(EXEEXT), clean-tui)
2008 (tui-main.o): Remove.
2009 (all_object_files): Remove tui-main.o.
2010 * NEWS: New note for the gdbtui removal.
2011 * configure: Rebuilt.
2012 * configure.ac: No longer add all-tui, clean-tui, install-tui and
2013 uninstall-tui to CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL and
2014 CONFIG_UNINSTALL respectively.
2015 * gdb.c (main): Remove args.interpreter_p initialization.
2016 * main.c (captured_main): Set INTERPRETER_P directly by INTERP_CONSOLE.
2017 * main.h (struct captured_main_args): Remove interpreter_p.
2018 * tui/tui-main.c: Remove.
2020 2012-01-01 Doug Evans <dje@google.com>
2022 * dwarf2read.c (dwarf2_compute_name): Simplify objfile references.
2023 (dwarf2_physname, read_import_statement): Ditto.
2024 (read_call_site_scope, dwarf2_record_block_ranges): Ditto.
2025 (process_structure_scope read_subroutine_type): Ditto.
2026 (read_typedef, load_partial_dies, read_partial_die): Ditto.
2027 (find_partial_die, dwarf_decode_lines, lookup_die_type): Ditto.
2028 (dwarf2_fetch_die_location_block): Ditto.
2029 (dwarf_decode_macros, dwarf2_symbol_mark_computed): Ditto.
2031 * dwarf2read.c (read_signatured_type): Delete `objfile' arg.
2032 All callers updated.
2033 (load_full_comp_unit, queue_comp_unit, process_queue): Ditto.
2034 (dw2_do_instantiate_symtab, dw2_instantiate_symtab): Ditto.
2035 (process_psymtab_comp_unit, load_partial_comp_unit): Ditto.
2037 * dwarf2read.c (load_cu): Move assert to more useful location.
2039 * dwarf2read.c (free_heap_comp_unit): Renamed from free_one_comp_unit.
2040 All callers updated.
2042 * dwarf2read.c (dwarf2_per_objfile): Add comment.
2043 (dwarf2_elf_names): Minor reformat.
2044 (dwarf2_per_cu_data): Tweak comment.
2045 (dwarf2_read_section): Fix comment.
2046 (create_all_comp_units): Fix comment.
2047 (load_full_comp_unit): Fix comment.
2048 (process_full_comp_unit): Fix comment.
2049 (read_signatured_type): Fix comment.
2051 For older changes see ChangeLog-2011.
2057 version-control: never