1 Mon Apr 21 09:49:25 1997 Stu Grossman (grossman@critters.cygnus.com)
3 * remote-pa.c: Remove. It's broken and no longer necessary.
5 Sat Apr 19 11:56:10 1997 Per Bothner <bothner@deneb.cygnus.com>
7 * java-exp.y: Combine TRUE and FALSE into BOOLEAN_LITERAL.
8 (Avoids name clash with broken AIX header files.)
10 Sat Apr 19 01:49:37 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
12 * serial.c (serial_log_command): Fix fputs_unfiltered calls.
14 * config/powerpc/tm-ppc-aix4.h, config/rs6000/tm-rs6000-aix4.h
15 (DONT_RELOCATE_SYMFILE_OBJFILE): Removed.
16 * xcoffsolib.h (struct vmap): Add new members tvma, toffs and dvma,
18 * exec.c (bfdsec_to_vmap): Initialize new vmap members, initialize
19 tstart and dstart with section VMA.
20 * rs6000-nat.c (vmap_symtab): Relocate relative to the VMA in the
22 (vmap_ldinfo, xcoff_relocate_core): Adjust tstart by section offset
23 of the text section, remove DONT_RELOCATE_SYMFILE_OBJFILE hack.
24 (vmap_exec): Relocate relative to the VMA in the object file,
25 relocate .bss section as well.
26 (xcoff_relocate_core): No longer adjust section addresses by VMA.
27 * rs6000-tdep.c (find_toc_address): Change type of tocbase
29 * xcoffread.c (secnum_to_bfd_section): New routine to get
30 BFD section from CS section number.
31 (scan_xcoff_symtab): Make toc_offset section relative.
33 * symtab.c (total_number_of_methods): Avoid core dump if
34 baseclass type is still undefined.
36 Fri Apr 18 17:25:10 1997 Stu Grossman (grossman@critters.cygnus.com)
38 * Makefile.in (SUBDIRS): Add mswin so that make cleanup cleans up
40 * defs.h utils.c (error warning): Make message be const.
41 * main.c (fputs_unfiltered): Only send gdb_stdout and gdb_stderr
42 to hook. Otherwise send it to fputs.
43 * monitor.c monitor.h (monitor_get_dev_name): New function. Does
45 * remote-e7000.c: Remove debugify stuff. Change printf, fprintf
46 to _filtered forms to make output appear in GUIs. Replace all
47 uses of SERIAL_READCHAR with readchar, which has better error
49 * (e7000_parse_device): Add prototype.
50 * (readchar): Improve doc. Handle random serial errors.
51 * (expect): Disable notice_quit code. It's busted. Remove
52 serial error handling (it's now handled in readchar). Remove
53 remote_debug echoing. That's handled in readchar as well.
54 * (e7000_parse_device): Remove serial_flag arg. It's not
56 * (e7000_open): Split into two pieces. Second part is
57 e7000_start_remote, and is error protected. Now, when we connect
58 to the target, we setup the initial frame and registers so that
59 the user gets an immediate indication of where the target is.
60 * (gch): Remove debug output. That's handled by readchar.
61 * (e7000_read_inferior_memory): Handle errors better.
62 * (_initialize_remote_e7000): Get rid of `<xxx>' things from
63 command names. They show up when doing completion and confuse
65 * ser-e7kpc.c: Remove the last seven months of brain damage. Get
66 rid of the DLL's since we can access the device directly from Win32s
67 and Win95. Get rid of debugify crud.
68 * serial.c: Remove debugify cruft.
69 * (serial_logchar serial_log_command serial_write serial_readchar
70 serial_send_break serial_close): Merge common functionality into
71 serial_logchar. Clean up rest of routines.
72 * sparclet-rom.c: Disembowel. Leave only download routine.
73 Download routine now switches to remote target automatically.
74 * top.c (disconnect): Only define if SIGHUP is defined. Cleans
75 up MSVC/Win32 problem.
76 * utils.c (gdb_flush): Don't call hook unless it's for gdb_stdout
78 * config/sh/tm-sh.h: Define TARGET_SH for WinGDB.
79 * config/sparc/tm-sparclet.h: Remove override for prompt.
81 Fri Apr 18 13:38:19 1997 Doug Evans <dje@canuck.cygnus.com>
83 * remote-sim.c (gdbsim_open): Only pass -E to sim_open if
84 TARGET_BYTE ORDER_SELECTABLE.
86 Fri Apr 18 16:52:41 1997 Andrew Cagney <cagney@b1.cygnus.com>
88 * remote-sim.c (init_callbacks): Initialize poll_quit and magic
89 fields of gdb_callback.
90 (gdbsim_stop): Add gdbsim_stop to list of supported client
92 (gdbsim_wait, gdbsim_resume): Move call to sim_resume into
93 sim_wait where gdb is in a position to handle a long running
95 (gdbsim_cntrl_c): New function. Wrap the sim_resume call in a
97 (gdb_os_poll_quit): New function. Check for a quit pending on the
101 Wed Apr 16 12:33:06 1997 Andrew Cagney <cagney@b1.cygnus.com>
103 * Makefile.in (install-only): Make list of gdbtcl files to install
104 explicit - was picking up files such as CVS ChangeLog etc.
105 (install-only): Don't blindly create the directory.
108 Thu Apr 17 14:30:04 1997 Per Bothner <bothner@deneb.cygnus.com>
110 * defs.h (enum language): Add language_java.
111 * java-exp.y, java-lang.c, java-lang.h, java-valprint.c: New files.
112 * Makefile.in: Upadte for new files.
113 * objfiles.c (allocate_objfile): Allow NULL bfd argument.
114 * symfile.c (deduce_language_from_filename): Recognize .java.
116 Thu Apr 17 02:20:23 1997 Doug Evans <dje@canuck.cygnus.com>
118 * m32r-stub.c (stash_registers): Rewrite.
119 (restore_registers): Renamed to restore_and_return.
120 (cleanup_stash): New function.
121 (process_exception): New function.
122 (_catchException*): Rewrite.
124 * remote-sim.c (gdbsim_load): Update call to sim_load.
125 (gdbsim_create_inferior): No longer pass start_address to
127 (gdbsim_open): Pass endian indicator as arg.
129 Tue Apr 15 15:31:09 1997 Stan Shebs <shebs@andros.cygnus.com>
131 * remote.c (get_offsets): Don't use scanf for interpreting
132 response to qOffsets.
134 Tue Apr 15 14:51:04 1997 Ian Lance Taylor <ian@cygnus.com>
136 * gdbserver/Makefile.in (INSTALL_XFORM): Remove.
137 (INSTALL_XFORM1): Remove.
138 (install-only): Use $(program_transform_name) directly, rather
139 than using $(INSTALL_XFORM) and $(INSTALL_XFORM1).
140 (uninstall): Transform name.
142 Mon Apr 14 17:06:27 1997 Mark Alexander <marka@cygnus.com>
144 * remote-mips.c (mips_load): Ensure that PC gets updated
145 after a load on LSI target.
147 Mon Apr 14 15:54:51 1997 Geoffrey Noer <noer@pizza.cygnus.com>
149 * procfs.c (notice_signals): fix typo
151 Mon Apr 14 16:25:10 1997 Ian Lance Taylor <ian@cygnus.com>
153 * gdbserver/Makefile.in (INSTALL): Change install.sh to
156 Mon Apr 14 11:55:27 1997 Geoffrey Noer <noer@pizza.cygnus.com>
158 * config/i386/cygwin32.mh: remove -lkernel32 from XM_CLIBS
159 since gcc automatically includes it
161 Thu Apr 10 13:20:53 1997 Geoffrey Noer <noer@cygnus.com>
163 * procfs.c: Substantial (but incomplete) changes to support
164 sysv4.2mp procfs as implemented in UnixWare 2.1. The procinfo
165 struct now has substructs like struct flt_ctl instead of
166 just a fltset_t and has a ctl_fd, status_fd, as_fd, and
167 map_fd instead of a single fd. Non-sysv4.2mp procfs models
168 still have the structs and multiple fds, but don't use the
169 entire struct and the four fds all point to the same thing.
170 We use PROCFS_USE_READ_WRITE to decide whether to talk to
171 procfs with reads/writes or use ioctl instead. We use
172 HAVE_MULTIPLE_PROC_FDS to determine whether procfs really has
173 multiple fds or not. PROC_NAME_FMT is split out into
174 CTL_PROC_NAME_FMT, AS_PROC_NAME_FMT, MAP_PROC_NAME_FMT,
175 STATUS_PROC_NAME_FMT.
177 (procfs_notice_signals): now a necessary wrapper around
178 (notice_signals): which are the new guts for noticing signals
179 (open_proc_file): gets a new flag arg used in sysv4.2mp to
180 determine whether or not to attempt to open the ctl_fd.
181 (procfs_read_status): new local function, reads procfs status
182 (procfs_write_pcwstop): new local function, writes a PCWSTOP
183 (procfs_write_pckill): new local function, writes a PCKILL
184 (unconditionally_kill_inferior): remove signo since we now
185 just call procfs_write_pckill().
186 (procfs_xfer_memory): call lseek with SEEK_SET rather than 0
187 (proc_iterate_over_mappings): the whole function is ifdefed
188 on UNIXWARE to keep things readable.
190 Expanded the syscall_table to include new potential sysv4.2mp
191 members. Note that all ifdefs of UNIXWARE should be eliminated
192 if possible or renamed to describe what's being selected for a
193 bit better. Sysv4.2mp and IRIX both have SYS_sproc so the
194 IRIX specific code now also checks it's not UNIXWARE.
196 * config/i386/tm-i386v42mp.h: also define HAVE_PSTATUS_T,
197 HAVE_NO_PRRUN_T, PROCFS_USE_READ_WRITE, and UNIXWARE
198 * config/mips/nm-irix4.h: set CTL_PROC_NAME_FMT et al to
199 "/debug/%d" as PROC_NAME_FMT used to be
201 Wed Apr 9 11:36:14 1997 Jeffrey A Law (law@cygnus.com)
203 * mn10300-tdep.c: Almost completely rewritten based on mn10200
205 * config/mn10300/tm-mn10300.h: Likewise.
207 Tue Apr 8 10:45:24 1997 Stu Grossman (grossman@critters.cygnus.com)
209 * config/pa/{hppabsd.mt hppahpux.mt hppaosf.mt}: Remove
210 remote-pa.o from TDEPFILES. Nobody uses it, and besides, it's a
211 lousy out-of-date clone of remote.c.
213 Fri Apr 4 08:21:21 1997 Stu Grossman (grossman@critters.cygnus.com)
215 * remote.c: Fix problems realized while showering.
216 * (hexnumlen): Add prototype. Use max, not min.
217 * (remote_write_bytes remote_read_bytes): Fix max packet size
218 calculations to properly account for packet overhead. Also handle
219 (probably rare) case where remote_register_buf_size isn't set.
221 * remote.c: Fix doc for `C' and `S' commands to indicate full
223 * (remote_ops extended_remote_ops remote_desc remote_write_size):
225 * (remote_fetch_registers remote_write_bytes remote_read_bytes):
226 Record size of response to fetch registers command, use this to
227 limit size of memory read and write commands.
228 * (push_remote_target): New function to make it possible to have
229 another target switch to the remote target.
230 * target.h: Add prototype for push_remote_target.
231 * sh-tdep.c (sh_frame_find_saved_regs): Fix sign extension bugs
232 for hosts which default to unsigned chars (such as SGI's).
233 * (_initialize_sh_tdep): Don't set remote_write_size. It's now
234 handled automatically in remote.c.
236 Thu Apr 3 15:10:30 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
238 * blockframe.c: blockvector_for_pc_sect(), block_for_pc_sect(),
239 find_pc_sect_function(), find_pc_sect_partial_function(): new
240 functions for debugging overlays; pc without section is ambiguous.
241 * breakpoint.[ch]: add section pointer to breakpoint struct;
242 add section argument to check_duplicates(); check section as well
243 as pc in [breakpoint_here_p(), breakpoint_inserted_here_p(),
244 breakpoint_thread_match(), bpstat_stop_status()];
245 add section argument to describe_other_breakpoints();
246 use INIT_SAL() macro to zero-out new sal structures;
247 make resolve_sal_pc() fix up the sal's section as well as its pc;
248 match on section + pc in clear_command() and delete_breakpoint();
249 account for overlay sections in insert_breakpoints(),
250 remove_breakpoint() and breakpoint_re_set_one();
251 all this to support overlays where a PC is not unique.
252 * exec.c: change xfer_memory() to handle overlay sections.
253 * findvar.c: change read_var_value() to handle overlay sections.
254 * frame.h: declaration for block_for_pc_sect() [blockframe.c].
255 * infcmd.c: jump_command() warns against jumping into an overlay
256 that's not in memory. Also use INIT_SAL() to initialize sals.
257 * infrun.c: wait_for_inferior() sets a flag to invalidate cached
258 overlay state information; Also use INIT_SAL() to init sals.
259 * m32r-rom.c: modify load routines to use LMA instead of VMA.
260 * m32r-stub.c: mask exit value down to 8 bits; screen out any
261 memory read/writes in the range 600000 to a00000, and ff680000
262 to ff800000 (hangs because nothing is mapped there); fix strcpy().
263 * maint.c: maintenance command "translate-address" supports overlays.
264 * minsyms.c: lookup_minimal_symbol_by_pc_sect() supports overlays.
265 * objfiles.[ch]: add ovly_mapped field to the obj_section struct;
266 this constitutes gdb's internal overlay mapping table. Add macro
267 ALL_OBJSECTIONS() to loop thru the obj_structs and look at overlays.
268 Add function find_pc_sect_section().
269 * printcmd.c: modify print_address_symbolic() with overlay smarts;
270 modify address_info() with overlay smarts; add function sym_info()
271 to support the INFO SYMBOL command (translate address to symbol(s));
272 modify disassemble_command() to work on unmapped overlays.
273 * source.c: use INIT_SAL() to initialize sals.
274 * symfile.[ch]: change generic_load() to use section's LMA address
275 instead of VMA address, for overlay sections.
276 Add numerous functions for finding a PC's section / overlay,
277 translating between VMA and LMA address ranges, determining if an
278 overlay section is mapped, etc. Add several user commands for
279 overlay debugging. Add support for a "generic" form of automatically
280 reading overlay mapping info from the inferior (based on the default
281 (simple) overlay manager which Cygnus provides as an example).
282 * symtab.[ch]: add functions find_pc_sect_symtab(),
283 find_pc_sect_psymtab(), find_pc_sect_psymbol(), find_pc_sect_line()
284 for lookup; modify lookup_symbol and decode_line_1() to use them;
285 modify find_function_start_sal() to account for overlay sections;
286 add macro INIT_SAL() for initializing struct symtab_and_line.
287 * target.c: fix a comment in the declaration of target_ops.
289 Thu Apr 3 10:31:12 1997 Mark Alexander <marka@cygnus.com>
291 * mips-tdep.c (mips_in_call_stub, mips_in_return_stub,
292 mips_skip_stub, mips_ignore_helper): New functions for dealing
293 with MIPS16 call/return thunks.
294 (mips_init_frame_pc_first): New function to implement
295 INIT_FRAME_PC_FIRST macro; includes code from old macro plus
296 new code to skip over MIPS16 thunks.
297 (mips_frame_chain): Skip over MIPS16 thunks.
298 * config/mips/tm-mips.h (mips_in_call_stub, mips_in_return_stub,
299 mips_skip_stub, mips_ignore_helper): Declare.
300 (IN_SOLIB_CALL_TRAMPOLINE, IN_SOLIB_RETURN_TRAMPOLINE,
301 SKIP_TRAMPOLINE_CODE, IGNORE_HELPER_CALL): New macros that invoke
303 (INIT_FRAME_PC_FIRST): Change to invoke mips_init_frame_pc.
304 (mips_init_frame_pc): Declare.
305 * infrun.c (wait_for_inferior): Use new IGNORE_HELPER_CALL macro
306 to decide if certain library function calls should be ignored.
308 Wed Apr 2 14:16:51 1997 Doug Evans <dje@canuck.cygnus.com>
310 * remote-sim.c (gdbsim_open): Check return code from sim_open.
311 Update call to sim_open (new arg SIM_OPEN_DEBUG).
314 Tue Apr 1 15:04:21 1997 Jason Molenda (crash@godzilla.cygnus.co.jp)
316 * configure.in (gdbtcl): Create soft-link for gdbtcl/ directory instead
320 Mon Mar 31 14:55:53 1997 Ian Lance Taylor <ian@cygnus.com>
322 * gdbinit.in: New file.
324 * configure.in: Generate .gdbinit from gdbinit.in.
325 * configure: Rebuild.
328 Sun Mar 30 12:28:24 1997 Fred Fish <fnf@cygnus.com>
330 * config/tic80/tic80.mt: Disable using the simulator
334 Sat Mar 29 13:57:20 1997 Fred Fish <fnf@cygnus.com>
336 * COPYING: Install new version of file from FSF.
337 * copying.c (show_copying_command): Update FSF address.
339 Fri Mar 28 18:33:41 1997 Ian Lance Taylor <ian@cygnus.com>
341 * Makefile.in (distclean): Remove .gdbinit.
344 Fri Mar 28 15:37:30 1997 Fred Fish <fnf@ninemoons.com>
346 * config/tic80/tm-tic80.h (NAMES_HAVE_UNDERSCORE): Define.
349 Fri Mar 28 15:38:04 1997 Mike Meissner <meissner@cygnus.com>
351 * remote-sim.c (gdb_os_{,e}vprintf_filtered): Change stdarg type
352 to va_list from void *, since va_list might not be a pointer
356 Fri Mar 28 17:04:02 1997 Jason Molenda (crash@godzilla.cygnus.co.jp)
358 * Makefile.in (gdbtk.o): look for GDBTK_LIBRARY in $(datadir) by
359 default, not $(srcdir).
362 Thu Mar 27 14:21:46 1997 Mark Alexander <marka@cygnus.com>
364 * remote-mips.c: Clean up comment and extraneous semicolon
365 for mips_monitor_prompt variable.
367 Thu Mar 27 12:46:58 1997 Mark Alexander <marka@cygnus.com>
369 * remote-mips.c: Add `set monitor-prompt' command.
371 Wed Mar 26 06:47:44 1997 Mark Alexander <marka@cygnus.com>
373 Fix from Peter Schauer:
374 * mdebugread.c (parse_procedure): Set address of procedure to
375 block start; this fixes problems with shared libraries introduced
378 Mon Mar 24 19:43:16 1997 Geoffrey Noer <noer@cygnus.com>
380 * symtab.c (find_pc_symtab): change to support the case
381 where the objfile is reordered and contains both coff and
382 stabs debugging info (continue on if a psymtab isn't found).
384 Sun Mar 23 16:19:20 1997 Mark Alexander <marka@cygnus.com>
386 Fixes from Peter Schauer:
387 * config/mips/tm-mips.h (REGISTER_CONVERT_TO_TYPE,
388 REGISTER_CONVERT_FROM_TYPE): Swap words if target, not host,
389 is big-endian and if registers are 32 bits.
390 * mips-tdep.c (mips_print_register, mips_extract_return_value,
391 mips_store_return_value): Fix floating-point word-order problems on
392 little-endian targets introduced by changes of Mar 21.
394 Sun Mar 23 15:43:27 1997 Stan Shebs <shebs@andros.cygnus.com>
396 * remote.c (target_resume_hook, target_wait_loop_hook): New
398 (remote_resume, remote_wait): Use them.
399 * d10v-tdep.c: Set the above hooks.
400 (tracesource): New GDB variable, controls source display in
402 (display_trace): Find and display source line if requested.
403 (trace_info): Mention empty trace buffer if appropriate.
404 (tdisassemble_command): Robustify argument handling.
406 * configure.host: Remove extra bogus Linux case.
408 Sat Mar 22 16:41:35 1997 Fred Fish <fnf@cygnus.com>
410 * remote-sim.c (simulator_command): Add comment about dealing with
413 * Makefile.in (tic80-tdep.o): Add target.
414 * configure.tgt: Add tic80 case.
415 * tic80-tdep.c: New file.
416 * config/tic80/{tic80.mt, tm-tic80.h}: New files.
419 Sat Mar 22 02:48:11 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
421 * c-exp.y (yylex): Handle nested template parameter lists.
422 * symtab.c (decode_line_2): Fix test for valid choice number.
424 Fri Mar 21 19:10:05 1997 Mark Alexander <marka@cygnus.com>
426 * mips-tdep.c (mips_push_arguments): On non-EABI architectures,
427 copy first two floating point arguments to general registers, so that
428 MIPS16 functions will receive the arguments correctly.
429 (mips_print_register): Print double registers correctly on
431 (mips_extract_return_value): Return double values correctly
432 on little-endian hosts.
434 * mdebugread.c (parse_procedure): Adjust address of procedure relative
435 to address in file descriptor record; this accounts for constant
436 strings that may precede functions in the text section. Remove
437 now-useless lowest_pdr_addr from argument list and all calls.
439 Fri Mar 21 15:36:25 1997 Michael Meissner <meissner@cygnus.com>
441 * configure.tgt (powerpc*-{eabi,linux,sysv,elf}*): Determine
442 whether the simulator will be built by whether the Makefile in the
443 simulator directory was built.
445 * configure.in (--enable-sim-powerpc): Delete switch.
446 * configure: Regenerate.
448 Thu Mar 20 20:52:04 1997 Jeffrey A Law (law@cygnus.com)
450 * mn10200-tdep.c (mn10200_analyze_prologue): Look for save of "a1"
453 * remote-sim.c (gdb_os_vprintf_filtered): Fix to work with non-ANSI
455 (gdb_os_evprintf_filtered): Similarly.
457 Wed Mar 19 16:13:22 1997 Geoffrey Noer <noer@pizza.cygnus.com>
459 New UnixWare 2.1 configuration
460 * config/i386/i386v42mp.mt: new
461 * config/i386/i386v42mp.mh: new
462 * config/i386/tm-i386v42mp.h: new
463 * config/i386/nm-i386v42mp.h: new
464 * configure.tgt: added new entries
465 * configure.host: added new entries
468 Wed Mar 19 15:16:17 1997 Martin M. Hunt <hunt@onions.cygnus.com>
470 * Makefile.in: Install gdbtcl dir instead of gdbtk.tcl.
472 * gdbtk.c: Added some ifdefs for Windows. Changed GDBTK_FILENAME
473 to GDBTK_LIBRARY, which is now a path to search.
474 (gdb_path_conv): New function. Convert Cygwin32 pathname to
477 * {aclocal.m4,configure.in}: Changes for Windows builds.
479 * configure: Rebuilt.
482 Mon Mar 17 17:52:00 1997 J.T. Conklin <jtc@cygnus.com>
484 * dsrec.c (load_srec): Print leading zeroes when printing section
487 Mon Mar 17 15:00:16 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
489 * remote-sim.h: Delete - moved to ../include/remote-sim.h.
491 * Makefile.in (remote_utils_h): Update path to remote-sim.h.
493 Fri Mar 7 20:55:28 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
495 * remote-sim.c (flush_stdout, write_stderr, flush_stderr,
496 vprintf_filtered, evprintf_filtered): Callbacks that accept
499 Sat Mar 15 00:50:46 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
501 * breakpoint.c (insert_breakpoints, watchpoint_check,
502 bpstat_stop_status): Do not disable watchpoints going out of scope.
503 (insert_breakpoints): Make sure that the current frame is valid
504 before calling find_frame_addr_in_frame_chain.
506 * top.c (setup_user_args): Handle quotes and backslashes.
507 (print_gdb_version): Update copyright year.
509 Fri Mar 14 15:44:03 1997 Ian Lance Taylor <ian@cygnus.com>
511 * Makefile.in (elfread.o): Depend upon elf-bfd.h and elf/mips.h.
514 Fri Mar 14 10:01:29 1997 Tom Tromey <tromey@cygnus.com>
516 * configure: Regenerated.
517 * configure.in (LIBS): Re-reverse order of TCL_LIBS and TK_LIBS.
520 Thu Mar 13 22:51:00 1997 Dawn Perchik <dawn@cygnus.com>
522 * utils.c (pollquit, notice_quit): If _WIN32, limit test for
524 (initialize_utils): If _WIN32, don't call ScreenRows and ScreenCols
525 except under wingdb. (Contributed by Martin Hunt).
527 Thu Mar 13 12:40:49 1997 Tom Tromey <tromey@cygnus.com>
529 * configure: Regenerated.
530 * configure.in: Run AC_CONFIG_AUX_DIR before AC_CANONICAL_SYSTEM.
532 Thu Mar 13 11:00:22 1997 Doug Evans <dje@canuck.cygnus.com>
534 * remote-sim.h (sim_state, SIM_DESC): New types.
535 (sim_open): Return a `descriptor' as result.
536 (*): New argument of descriptor result from sim_open.
537 * remote-sim.c (gdbsim_desc): Renamed from gdbsim_open_p.
538 (gdbsim_open): Record result of sim_open in gdbsim_desc.
539 Pass argv list to sim_open, argv[0] = pseudo program name.
540 (*): Pass gdbsim_desc to sim_foo fns.
542 Wed Mar 12 14:40:06 1997 Tom Tromey <tromey@cygnus.com>
544 * config.in: Regenerated.
546 * acconfig.h (START_INFERIOR_TRAPS_EXPECTED, sys_quotactl,
547 HAVE_HPUX_THREAD_SUPPORT): Define.
550 Wed Mar 12 14:29:52 1997 Tom Tromey <tromey@cygnus.com>
552 * gdbtk.c (x_event): Use Tcl_DoOneEvent, TCL_DONT_WAIT,
555 * configure: Regenerated.
556 * configure.in (ENABLE_GDBTK): Put TCL_LIBS after TK_LIBS in
561 Tue Mar 11 07:25:27 1997 Mark Alexander <marka@cygnus.com>
563 First cut at supporting simulators in gdbserver:
565 * configure, configure.in: Allow gdbserver to be configured
566 for cross-target environments.
567 * gdbserver/Makefile.in: Add simulator support.
568 * gdbserver/configure.in: Eliminate assumption that host == target.
569 Simplify using gdb/configure.tgt and gdb/configure.host.
570 Fix other minor configuration errors.
571 * gdbserver/low-sparc.c: Fix compile error.
572 * gdbserver/remote-utils.c: Eliminate assumption that registers
573 and addresses are four bytes. Fix minor compile errors and warnings.
574 * gdbserver/server.c: Rewrite numerous instances of identical code
575 for starting inferior processes to call new function start_inferior.
576 Eliminate assumption that registers and addresses are four bytes.
577 * gdbserver/server.h: Add missing prototypes to eliminate compiler
579 * gdbserver/low-sim.c: New file to mate gdbserver with simulators.
580 * config/mips/vr5000.mt: Add Vr5000 simulator support to gdbserver.
581 * config/i386/linux.mh: Eliminate gdbserver support as a first step
582 in moving such support from host to target makefile fragments.
583 * config/i386/linux.mt: Move gdbserver support here from linux.mh.
585 Mon Mar 10 12:27:47 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
587 * symtab.h (INIT_SAL): New macro to initialize symtab_and_line,
588 to insure consistant initialization of unused fields to zero.
589 * symtab.c: replace initializations of sals with new macro INIT_SAL.
590 * breakpoint.c: ditto.
593 * source.c: add call to INIT_SAL macro.
595 Sat Mar 8 00:16:37 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
597 * sparc-tdep.c (isbranch): Always handle v9 branch instructions,
598 they might get used on 32 bit targets as well.
600 Wed Mar 5 19:34:09 1997 Bob Manson <manson@charmed.cygnus.com>
602 * remote-mips.c (mips_exit_debug): Some IDT boards don't
603 send the full exit string.
605 Wed Mar 5 12:59:27 1997 Jeffrey A Law (law@cygnus.com)
607 * mn10200-tdep.c (mn10200_push_arguments): Handle new calling
609 (mn10200_store_struct_return): Likewise.
611 Tue Mar 4 10:31:02 1997 Mark Alexander <marka@cygnus.com>
613 * mips-tdep.c (mips_fetch_instruction): New function; replace
614 common code throughout with calls to it.
615 (mips_find_saved_regs): Examine MIPS16 entry instruction to determine
616 correct saved addresses of $s0 and $s1.
617 (mips_find_saved_regs, mips16_heuristic_proc_desc): Use MIPS_REGSIZE
618 instead of hardcoded 4.
619 (mips16_skip_prologue): Handle extended instructions correctly.
621 Mon Mar 3 12:29:20 1997 Doug Evans <dje@canuck.cygnus.com>
623 * defs.h (LONGEST): Move #ifndef LONGEST to outside.
624 Try BFD_HOST_64_BIT if ! CC_HAS_LONG_LONG.
626 Thu Feb 27 18:54:11 1997 Mark Alexander <marka@cygnus.com>
628 * mips-tdep.c (IS_MIPS16_ADDR, MAKE_MIPS16_ADDR, UNMAKE_MIPS16_ADDR):
629 New macros for testing, setting, and clearing bit 0 of addresses.
630 Change numerous bits of code where bit 0 was being manipulated
633 Thu Feb 27 14:12:41 1997 Mark Alexander <marka@cygnus.com>
635 * remote-mips.c: Put back the form feeds.
637 Thu Feb 27 12:04:24 1997 Mark Alexander <marka@cygnus.com>
639 * remote-mips.c: Remove form feeds (^L) from source.
640 (mips_initialize): LSI PMON doesn't support 'set regsize' command.
641 (pmon_wait): Don't need to exit and re-enter debug mode on LSI
642 PMON after a continue; it causes target program misbehavior.
643 (mips_fetch_register): Don't fetch unsupported registers; this
644 cuts down on wasted serial traffic.
646 Thu Feb 27 09:38:16 1997 Stu Grossman (grossman@critters.cygnus.com)
648 * configure.in configure (HPUX/OSF thread support): Enable this
649 only when running GCC, since HP's thread header files use ANSI C
650 which is not supported by their default compiler.
652 * configure.host (i[3456]86-*-windows): Disable long long
653 support for WinGDB. Add mswin to configdirs.
654 * configure.in configure: Move calls to configure.host and
655 configure.tgt to the top of configure.in to allow them to set
656 config variables before they are referenced.
658 Tue Feb 25 20:21:52 1997 Stan Shebs <shebs@andros.cygnus.com>
660 * configure.tgt (mips*-*-lnews*): New target.
662 Mon Feb 24 16:35:00 1997 Jeffrey A Law (law@cygnus.com)
664 * mn10200-tdep.c (mn10200_analyze_prologue): Don't fix fi->frame
665 if we're not the innermost frame. Fix minor typos.
667 Sat Feb 22 03:39:50 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
669 * stabsread.c (read_type): Fix handling of template names
670 with template parameters containing `::'.
672 * valops.c (search_struct_field, search_struct_method):
673 Pass correct valaddr parameter to baseclass_offset.
674 Prevent gdb crashes by making sure that the virtual base pointer
675 from an user object still points to accessible memory.
677 Tue Feb 18 13:36:34 1997 Mark Alexander <marka@cygnus.com>
679 * maint.c: Eliminate -Wall warnings by including some header files.
681 Tue Feb 18 13:06:30 1997 Mark Alexander <marka@cygnus.com>
683 * remote-sim.c (init_callbacks): Undo previous change.
685 Tue Feb 18 11:13:00 1997 Dawn Perchik <dawn@cygnus.com>
687 * maint.c: Fix dereference of pointer.
688 * remote-sim.c: Fix reference of structure member "last_error".
689 * debugify.c: Include config.h to get ANSI definitions.
691 Sat Feb 15 17:43:46 1997 Stu Grossman (grossman@critters.cygnus.com)
693 * remote-vx.c (vx_attach): Fix for PR 11356. Remove code added
694 by kung. It made no sense.
696 Fri Feb 14 13:00:07 1997 Ian Lance Taylor <ian@cygnus.com>
698 * main.c (print_gdb_help): Make static to match declaration.
700 Thu Feb 13 18:18:18 1997 Dawn Perchik <dawn@cygnus.com>
702 * remote-e7000.c, ser-e7kpc.c, serial.c: Remove // comments.
704 Wed Feb 12 15:58:00 1997 Dawn Perchik <dawn@cygnus.com>
706 * debugify.c, debugify.h: Make safe for non-ansi compilers.
708 Wed Feb 12 15:30:00 1997 Dawn Perchik <dawn@cygnus.com>
710 * defs.h: Fix prototypes for new cleanup functions.
712 Wed Feb 12 15:08:47 1997 Dawn Perchik <dawn@cygnus.com>
714 * debugify.c, debugify.h: Fix for general gnu use. Remove C++
715 comment, add PARAMS, add license info and fix indentation.
717 Wed Feb 12 14:42:47 1997 Dawn Perchik <dawn@cygnus.com>
719 * debugify.c, debugify.h: New files. Provide common macros
720 for writing debug info to a log file or stdio.
722 Wed Feb 12 02:44:39 1997 Dawn Perchik <dawn@cygnus.com>
724 * c-valprint.c (c_val_print): Fix printing for arrays defined
725 with 0 length. A sticky tag caused this fix from
726 revision 2.32 date: 1996/04/29 23:25:27; author: dawn;
727 state: Exp; lines: +1 -0 branches: 2.32.34;
728 to not make it into devo.
730 Tue Feb 11 22:24:39 1997 Dawn Perchik <dawn@cygnus.com>
732 * defs.h: Fix cntl-C to read from the Windows message queue.
733 Add prototypes for make_final_cleanup (and the other cleanup
735 * remote-e7000.c: Fix sync code to timeout if unable to sync.
736 Change sync code to report status while trying to sync-up
737 with hardware. Add debugging output and document.
738 * ser-e7kpc.c: Swap order of len & offset to match implementation.
739 Add debugging output and document.
740 * serial.c: Add debugging output.
741 * top.c: Add call to do_final_cleanups.
742 Remove conditionals preventing Win32 from getting SIGQUIT.
743 * utils.c: (*_cleanup): Modify cleanup routines to accept a cleanup
744 chain as a parameter. Extract this generic code from the cleanup
745 routines into separate funtions (*_my_cleanup). Keep old
746 functionality by passing "cleanup_chain" to the new funtions.
747 Define the cleanup chain "final_cleanup_chain" to be a cleanup
748 chain which will be executed only when gdb exits. Add functions
749 (*_final_cleanup) to match the original (*_cleanup) functions.
750 (pollquit, quit, notice_quit): Fix to read cntl-C from the
751 Windows message queue.
753 Tue Feb 11 15:36:31 1997 Doug Evans <dje@canuck.cygnus.com>
755 * m32r-rom.c: #include <sys/types.h>.
756 #ifdef out new load support if wingdb.
757 * m32r/tm-m32r.h (TARGET_M32R): Define, for wingdb.
759 Tue Feb 11 12:28:09 1997 Jeffrey A Law (law@cygnus.com)
762 * config/mn10200/tm-mn10200.h (STORE_STRUCT_RETURN): Fix.
763 * mn10200-tdep.c (mn10200_store_struct_return): New function.
765 * config/mn10200/tm-mn10200.h (EXTRACT_RETURN_VALUE): Fix case when
766 extracting a return value from a register pair.
768 * mn10200-tdep.c (mn10200_push_arguments): Stack only needs to
769 be two byte aligned. Round argument sizes up to two byte boundary.
770 Write out args in two byte hunks.
771 (mn10200_push_return_address): Implement.
772 * config/mn10200/tm-mn10200.h (EXTRACT_RETURN_VALUE): Abort for
773 structures > 8 bytes (temporary).
774 (STORE_RETURN_VALUE): Likewise.
775 (CALL_DUMMY): No longer undefine.
776 (USE_STRUCT_CONVENTION): Use for args > 8 bytes.
777 (REG_STRUCT_HAS_ADDR): Define.
780 Fri Feb 07 09:04:37 1997 Gavin Koch <gavin@cygnus.com>
782 * configure.tgt: added r5900.
785 Mon Feb 10 18:35:55 1997 Mark Alexander <marka@cygnus.com>
787 * mips-tdep.c (non_heuristic_proc_desc): New function.
788 (find_proc_desc): Move non-heuristic proc search code into separate
790 (gdb_print_insn_mips): Use non-heuristic method to find procedure
791 descriptor, to avoid prologue examination when disassembling.
792 * remote-mips.c: Add support for new "lsi" target (LSI MiniRISC
793 aka MicroMeteor board).
794 (mips_exit_debug): Prevent protocol reinitialization if an error
795 occurs while exiting debug mode.
797 Mon Feb 10 16:11:57 1997 Jeffrey A Law (law@cygnus.com)
799 * mn10200-tdep.c: Remove lots of debugging printfs, update/improve
800 comments, formatting, etc. Plus other minor fixes for problems
801 I found during my first pass over the mn10200 port.
802 (mn10200_analyze_prologue): New function.
803 (mn10200_frame_chain, mn10200_init_extra_frame_info): Use it.
804 * config/mn10200/tm-mn10200.h: Lots of updates/improvements to
805 comments, formatting, etc. Minor fixes for problems I found during
806 my first pass over the mn10200 port.
807 (TARGET_*_BIT): Define appropriately for ints, long longs, doubles and
809 (REGISTER_VIRTUAL_TYPE): Define as a long.
810 (EXTRACT_RETURN_VALUE): Rework to deal with long ints living
812 (STORE_RETURN_VALUE): Similarly.
814 * blockframe.c (generic_get_saved_regs): Remove unused variable
816 * breakpoint.c (frame_in_dummy): Move struct breakpoint *b decl
817 inside #ifdef CALL_DUMMY.
818 (watch_command_1): Initialize target_resources_ok.
819 * command.c (do_setshow_command): Provide dummy initialization
821 * valops.c (find_function_addr): Move function & prototype inside
823 (value_arg_coerce): Similarly.
824 (value_of_variable): Provide dummy initialization of "frame".
826 Mon Feb 10 13:50:53 1997 Stu Grossman (grossman@critters.cygnus.com)
828 * gdbtk.c (call_wrapper): Clear running_now if an error occurs.
829 This fixes PR 11323, where gdbtk stops responding if an error occurs.
831 Mon Feb 10 07:54:26 1997 Fred Fish <fnf@cygnus.com>
833 * xcoffread.c (RECORD_MINIMAL_SYMBOL): Add NULL asection* parameter
834 to prim_record_minimal_symbol_and_info call that was missed in Jan 3
836 (scan_xcoff_symtab): Ditto.
838 Sun Feb 09 09:23:26 1997 Mark Alexander <marka@cygnus.com>
840 * remote-mips.c (common_breakpoint): Prevent 64-bit addresses
841 from being sent to 32-bit targets by masking off upper bits.
842 * mips-tdep.c (heuristic_proc_start): Mask off upper 32 bits
843 of PC on 32-bit targets.
844 (mips16_heuristic_proc_desc): Recognize 'addiu s1,sp,n' as a
845 frame setup instruction.
846 (mips32_heuristic_proc_desc): Fix warning found by gcc -Wall.
847 (mips16_skip_prologue): Recognize 'addiu s1,sp,n' as a valid
848 prologue instruction. Fix warnings and bugs found by gcc -Wall.
849 * buildsym.c (finish_block): Improve handling of overlapping blocks;
850 fixes problem on MIPS16 printing function arguments.
852 Sat Feb 8 01:14:43 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
854 * dwarf2read.c (dwarf2_linkage_name): New function to get
855 the linkage name of a die from DW_AT_MIPS_linkage_name or
857 (read_func_scope, dwarf2_add_field, dwarf2_add_member_fn,
858 new_symbol): Use it instead of accessing DW_AT_name.
859 (read_partial_die): Use DW_AT_MIPS_linkage name as name of the
860 partial die if present.
861 (dwarf2_add_member_fn): Make a copy of physname on the type obstack.
863 Fri Feb 7 10:06:22 1997 Jeffrey A Law (law@cygnus.com)
865 * blockframe.c (generic_frame_chain_valid): If the new frame
866 is not INNER_THAN the old frame, then it's not valid.
868 Tue Feb 04 09:04:37 1997 Mark Alexander <marka@cygnus.com>
870 * mips-tdep.c (mips16_get_imm): Fix calculation of extended immediate.
871 (mips16_heuristic_proc_desc): Recognize jal(x) instruction.
873 Mon Feb 03 17:57:58 1997 Mark Alexander <marka@cygnus.com>
875 * mips-tdep.c (mips16_decode_reg_save): Distinguish between
876 sd and sw instructions correctly.
877 (heuristic_proc_start): Add support for MIPS16.
878 (mips16_get_imm, mips16_heuristic_proc_desc,
879 mips32_heuristic_proc_desc): New helper functions for
881 (heuristic_proc_desc): Rewrite and reorganize to support MIPS16.
882 (mips_push_arguments): Don't align small arguments in EABI.
883 (mips32_skip_prologue): Attempt to shrink code size a little.
885 Mon Feb 3 11:06:05 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
887 * m32r-stub.c: New -- remote protocol support for M32R cpu.
888 * m32r-rom.c: Several experiments with improved download time.
889 * .Sanitize: Add entry for m32r-stub.c
891 Fri Jan 31 08:26:39 1997 Mark Alexander <marka@cygnus.com>
893 * mips-tdep.c (MIPS16_INSTLEN): Define.
894 (mips_find_saved_regs): Replace hardcoded 2's with MIPS16_INSTLEN.
895 (heuristic_proc_start): Recognize 'entry' pseudo-op as a start
896 of function on MIPS16.
897 (mips32_skip_prologue, mips16_skip_prologue): New helper functions
898 for mips_skip_prologue.
899 (mips_skip_prologue): Recognize both 16- and 32-bit prologues.
901 Wed Jan 29 12:45:54 1997 Michael Meissner <meissner@tiktok.cygnus.com>
903 * config/powerpc/ppc{,le}-sim.mt (SIM): Remove the library
904 ../sim/common/libcommon.a.
906 Tue Jan 28 15:54:13 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
908 * blockframe.c: fix a null pointer ref in generic_get_saved_register
910 Tue Jan 28 15:39:50 1997 Geoffrey Noer <noer@cygnus.com>
912 * mn10200-tdep.c (mn10200_frame_chain): Get basic backtracing
915 Mon Jan 27 14:31:52 1997 Mark Alexander <marka@cygnus.com>
917 First set of changes for mips16:
918 * config/mips/tm-mips.h (MIPS16_BIG_BREAKPOINT,
919 MIPS16_LITTLE_BREAKPOINT, BREAKPOINT_FROM_PC): Define.
920 (ABOUT_TO_RETURN): Call new function mips_about_to_return.
921 (mips_breakpoint_from_pc, mips_about_to_return): Declare.
922 * mem-break.c (memory_breakpoint_from_pc): New function.
923 (memory_insert_breakpoint, memory_remove_breakpoint): Use
924 memory_breakpoint_from_pc to determine breakpoint contents and size.
925 * target.h (memory_breakpoint_from_pc): Declare.
926 * monitor.c (monitor_insert_breakpoint): Use memory_breakpoint_from_pc
927 to determine size of breakpoint instruction.
928 * mips-tdep.c (mips32_decode_reg_save, mips16_decode_reg_save):
929 New helper functions for mips_find_saved_regs.
930 (mips_find_saved_regs): Recognize mips16 prologues.
931 (mips_addr_bits_remove): Strip off upper 32 bits of address
932 when target CPU is 32 bits but CORE_ADDR is 64 bits.
933 (mips_step_skips_delay): No branch delay slot on mips16.
934 (gdb_print_insn_mips): Disassemble mips16 code.
935 (mips_breakpoint_from_pc, mips_about_to_return): New functions.
937 Mon Jan 27 10:34:03 1997 Jeffrey A Law (law@cygnus.com)
939 * tm-mn10200.h (NUM_REGS): Decrease to 12.
940 (REGISTER_NAMES): Elimination registers not found on the mn10200.
941 (PC_REGNUM, MDR_REGNUM, PSW_REGNUM): Corresponding changes.
942 (LIR_REGNUM, LAR_REGNUM): Delete. They don't exist on the mn10200.
944 Sat Jan 25 00:07:59 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
946 * dwarf2read.c: Replace integral tag, name and form fields in
947 internal structure definitions with the corresponding enumeration
948 types from dwarf2.h. Add default cases to switches on enumerations
950 Make quoting of string arguments in complaint messages consistent.
951 Check for NULL returns from DW_STRING.
952 (struct partial_die_info): Add sibling and has_type fields, remove
954 (DW_*): Move access macro definitions near the definition of the
956 (struct field_info): New structure to pass information about fields
957 and member functions between die processing routines.
958 (dwarf2_build_psymtabs_hard): Set cu_header_offset.
959 (scan_partial_symbols): Do not enter DW_TAG_subprogram dies into
960 the partial symbol table if the DW_AT_*_pc attributes are missing.
961 Add file scope base type definitions to the partial symbol table.
962 Skip over child dies if the die has a sibling attribute.
963 (add_partial_symbol): Enter global variables with type attributes
964 and without location descriptors into the partial symbol table.
965 Store value of DW_TAG_variable dies in the partial symbol table.
966 Do not enter global variables into the minimal symbol table.
967 Add base type definitions to the partial symbol table.
968 (psymtab_to_symtab_1): Use dwarf2_get_pc_bounds to determine highpc.
969 (process_die): Move check for DW_AT_low_pc to read_func_scope.
970 Add a typedef symbol for base type definitions to the symbol table.
971 Ignore DW_TAG_inlined_subroutine tags for now.
972 (read_file_scope): Use dwarf2_get_pc_bounds to determine pc bounds.
973 (read_func_scope, read_lexical_block_scope): Use dwarf2_get_pc_bounds
974 to determine pc bounds, ignore dies with invalid bounds.
975 (dwarf2_get_pc_bounds): New routine to extract and validate the
976 DW_AT_*_pc attributes of a die.
977 (dwarf2_add_field, dwarf2_attach_fields_to_type, skip_member_fn_name,
978 dwarf2_add_member_fn, dwarf2_attach_fn_fields_to_type):
979 New functions to handle fields and member functions.
980 (read_structure_scope): Rewritten to use them.
981 (read_array_type): Renamed from dwarf_read_array_type.
982 Default upper array bound to describe an array with unspecified
984 Create array types in backwards order, as dwarf2 puts out the array
985 dimensions from left to right.
986 (read_subroutine_type): Handle DW_TAG_unspecified_parameters,
987 DW_AT_artificial and DW_AT_prototyped.
988 (read_base_type): Make an unsigned type for DW_ATE_boolean.
989 Pass objfile to dwarf_base_type.
990 (read_partial_die): Use read_attribute to read in the attributes.
991 Handle DW_AT_sibling and DW_AT_type.
992 Follow references when determining DW_AT_name and DW_AT_external
993 attributes of the die.
994 Validate DW_AT_*_pc attributes.
995 (read_full_die): Use read_attribute to read in the attributes.
996 (read_attribute): New function to read an attribute described
997 by an abbreviated attribute.
998 (new_symbol): Relocate symbol value for DW_TAG_label with baseaddr.
999 Do not set SYMBOL_VALUE_ADDRESS for DW_TAG_subprogram,
1000 SYMBOL_BLOCK_VALUE for the symbol will be set later by finish_block.
1001 Change symbol class for global variables with a zero valued location
1002 descriptor to LOC_UNRESOLVED.
1003 Handle DW_AT_const_value attributes for DW_TAG_variable,
1004 DW_TAG_formal_parameter and DW_TAG_enumerator.
1005 Build a typedef symbol for DW_TAG_base_type.
1006 (dwarf2_const_value): New routine to copy a constant value from an
1007 attribute to a symbol.
1008 (dwarf_base_type): Use passed in objfile, not current_objfile
1009 when calling dwarf2_fundamental_type.
1010 (dump_die): Use DW_* accessor macros to access values of attributes.
1011 (decode_locdesc): Handle DW_OP_plus_uconst.
1013 Wed Jan 22 01:31:16 1997 Geoffrey Noer <noer@cygnus.com>
1015 * mn10200-tdep.c: New file.
1016 * config/mn10200/tm-mn10200.h: New, REGISTER_SIZE is 24 bits not 32,
1017 SP_REGNUM and FP_REGNUM are different, also no lar or lir.
1018 * config/mn10200/mn10200.mt: New file.
1019 * configure.tgt: add mn10200 entry.
1021 Tue Jan 21 18:32:23 1997 Stu Grossman (grossman@lisa.cygnus.com)
1023 * configure.in configure: Check if host has libdl if doing
1026 Tue Jan 21 17:03:26 1997 Geoffrey Noer <noer@cygnus.com>
1028 * mn10300-tdep.c: Wrote/fixed implementations of
1029 mn10300_frame_chain, mn10300_init_extra_frame_info,
1030 mn10300_frame_saved_pc
1031 * config/mn10300/tm-mn10300.h: Redefine INIT_EXTRA_FRAME_INFO
1032 and INIT_FRAME_PC macros.
1034 Tue Jan 21 17:01:20 1997 Stu Grossman (grossman@lisa.cygnus.com)
1036 * configure.in configure: Check if host has libm. Make sure we
1037 are using gcc when using the -export-dynamic option. Fixes a
1038 problem with building under Solaris/SunPro cc.
1040 Mon Jan 20 13:52:13 1997 Mark Alexander <marka@cygnus.com>
1042 * config/mips/{embed,embed64,embedl,embedl64}.mt:
1043 Link in simulator on MIPS embedded targets.
1045 Sat Jan 18 02:31:29 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1047 * blockframe.c (frameless_look_for_prologue): Mark frames
1048 with a zero PC as frameless to improve backtraces from core dumps
1049 caused by dereferencing a NULL function pointer.
1051 Thu Jan 16 14:10:41 1997 Geoffrey Noer <noer@cygnus.com>
1053 * config/mn10300/tm-mn10300.h: fix BREAKPOINT definition.
1055 Tue Jan 14 16:01:06 1997 Geoffrey Noer <noer@cygnus.com>
1057 * mn10300-tdep.c: made a lot more generic, ripping out code
1058 from copied target (no more mn10300_scan_prologue,
1059 init_extra_frame_info, and mn10300_fix_call_dummy calls)
1060 * config/mn10300/tm-mn10300.h: undefine INIT_EXTRA_FRAME_INFO
1061 and INIT_FRAME_PC macros
1063 Thu Jan 9 11:44:40 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
1065 * sparc-tdep.c (sparc_frame_find_saved_regs): Don't use
1066 FP_REGISTER_BYTES to compute offsets into the saved frame,
1067 since it fails for SPARC targets configured without any
1068 FP regs. Instead, use DUMMY_STACK_REG_BUF_SIZE.
1070 Mon Jan 6 11:15:14 1997 Stu Grossman (grossman@critters.cygnus.com)
1072 * symtab.c (fixup_symbol_section): Handle NULL symbols without
1075 Fri Jan 3 12:08:16 1997 Stu Grossman (grossman@critters.cygnus.com)
1077 * Makefile.in configure configure.in: Remove ENABLE_CLIBS,
1078 ENABLE_OBS, and THREAD_DB_OBS. These are consolidated into LIBS
1080 * configure configure.in: Clean up test cases around thread support.
1082 * configure.tgt (v850-*-*): Include v850ice.o and v850.lib if
1085 * c-valprint.c ch-valprint.c cp-valprint.c eval.c expprint.c
1086 printcmd.c valops.c value.h values.c: Add bfd_section arg to
1087 value_at and value_at_lazy.
1088 * coffread.c dbxread.c elfread.c mdebugread.c minsyms.c symtab.h:
1089 Add bfd_section arg to prim_record_minimal_symbol_and_info.
1090 * corefile.c gdbcore.h printcmd.c valops.c: Use read_memory_section
1091 instead of read_memory. It takes a bfd_section arg.
1092 * coffread.c dbxread.c elfread.c gdb-stabs.h objfiles.h: Remove
1093 unnecessary cast for assignment of struct dbx_symfile_info.
1094 Struct objfile now uses a real pointer instead of PTR for this
1096 * dbxread.c (dbx_symfile_init): Stash bfd section pointers for
1097 text, data and bss into dbx_symfile_info.
1098 * exec.c (xfer_memory): Handle transfers for user-specified
1100 * findvar.c (read_var_value locate_var_value): Copy bfd section
1101 from the symbol to the value.
1102 * gdb-stabs.h: Add section pointers for text, data and bss
1104 * maint.c (translate address command): Add test code for overlay
1105 address translation.
1106 * printcmd.c (do_examine do_one_display): Now takes a bfd section
1108 * (print_formatted x_command): Record current section along with
1109 current address for repeated commands.
1110 * sparc-nat.c (fetch_inferior_registers): Change
1111 target_xfer_memory to target_{read write}_memory to allow changes
1112 to target_xfer_memory interface for section info.
1113 * symmisc.c (dump_msymbols print_symbol): Print section
1114 assocaited with symbol.
1115 * symtab.c (fixup_symbol_section): New routine to
1116 add section info to symbols returned by lookup_symbol.
1117 * symtab.h (struct general_symbol_info): Add bfd section to
1119 * target.c target.h (target_xfer_memory): Add bfd section to
1121 * (target_read_memory_section): New routine to read data from a
1123 * (target_memory_bfd_section): New global variable to pass bfd
1124 section in to targets.
1125 * valarith.c (value_add value_addr value_array): Preserve bfd
1126 section when computing new value.
1127 * value.h (struct value): Add bfd section to values.
1128 * values.c (allocate_value value_copy): Initialize/preserve bfd
1130 * (unpack_double): Clean up _MSC_VER conditionals to remove
1133 * v850ice.c: New module to support communication with NEC's
1135 * config/v850/tm-v850.h (REGISTER_NAMES): Replace sp, gp, fp, and
1136 ep names with rxx names. sp and fp are renamed via a different
1140 Fri Jan 3 14:20:05 1997 Geoffrey Noer <noer@cygnus.com>
1142 * mn10300-tdep.c (mn10300_push_arguments): rewrote,
1143 also removed code elsewhere that made use of RP_REGNUM.
1144 * config/mn10300/tm-mn10300.h: ripped out RP_REGNUM, V0_REGNUM,
1145 ARG0_REGNUM, ARGLAST_REGNUM (all not appropriate for mn10300
1146 arch.), redefined SAVED_PC_AFTER_CALL, EXTRACT_RETURN_VALUE,
1147 EXTRACT_STRUCT_VALUE_ADDRESS, STORE_RETURN_VALUE.
1149 For older changes see ChangeLog-96
1155 version-control: never