1 2009-03-18 Doug Evans <dje@google.com>
3 * printcmd.c (display_uses_solib_p): Redo loop, scan element list
6 2009-03-18 Nathan Sidwell <nathan@codesourcery.com>
8 * Makefile.in: Update license to GPLv3.
9 * ada-exp.y: Update license to GPLv3.
10 * ada-lex.l: Update license to GPLv3.
11 * c-exp.y: Update license to GPLv3.
12 * cp-name-parser.y: Update license to GPLv3.
13 * darwin-nat-info.c: Update license to GPLv3.
14 * f-exp.y: Update license to GPLv3.
15 * gdb_thread_db.h: Update license to GPLv3.
16 * hppanbsd-nat.c: Update license to GPLv3.
17 * hppanbsd-tdep.c: Update license to GPLv3.
18 * hppaobsd-tdep.c: Update license to GPLv3.
19 * jv-exp.y: Update license to GPLv3.
20 * m2-exp.y: Update license to GPLv3.
21 * objc-exp.y: Update license to GPLv3.
22 * p-exp.y: Update license to GPLv3.
23 * reply_mig_hack.awk: Update license to GPLv3.
24 * reverse.c: Update license to GPLv3.
25 * xtensa-xtregs.c: Update license to GPLv3.
27 2009-03-18 Pedro Alves <pedro@codesourcery.com>
29 * remote.c (remote_close): Don't call generic_mourn_inferior.
30 (remote_mourn_1): Call generic_mourn_inferior after closing the
33 2009-03-18 Pedro Alves <pedro@codesourcery.com>
35 * remote.c (remote_start_remote): Add missing call to
36 init_wait_for_inferior in non-stop mode.
38 2009-03-18 Pedro Alves <pedro@codesourcery.com>
40 * breakpoint.c (bpstat_should_step): Only consider software
41 watchpoints that have a location.
43 2009-03-17 Joel Brobecker <brobecker@adacore.com>
45 Add a target_ops parameter to the to_kill method in struct target_ops.
47 * target.h (struct target_ops): Add a "target_ops *" parameter to
49 (target_kill): Remove macro. Add declaration.
50 * target.c (debug_to_kill): Delete, no longer necessary.
51 (target_kill): New function.
52 (update_current_target): Stop inheriting the to_kill method.
53 Do not de_fault it to no_process either.
54 (setup_target_debug): Do not set current_target.to_kill.
55 * gnu-nat.c, go32-nat.c, hpux-thread.c, inf-ptrace.c, inf-ttrace.c,
56 linux-nat.c, monitor.c, nto-procfs.c, procfs.c, remote-m32r-sdi.c,
57 remote-mips.c, remote-sim.c, remote.c, windows-nat.c: Update
60 2009-03-17 Doug Evans <dje@google.com>
62 * amd64-linux-nat.c (si_timerid,si_overrun): Provide definition for
63 glibc 2.3.2 and earlier.
65 2009-03-17 Joel Brobecker <brobecker@adacore.com>
67 * frame.c (get_prev_frame_1): Do not perform the inner_frame
68 sanity check if this_frame is not NORMAL.
69 (frame_id_inner): Update the description of this function.
71 2009-03-17 Hui Zhu <teawater@gmail.com>
73 * stack.c: Change the introduce of "disassemble-next-line".
75 2009-03-17 Pedro Alves <pedro@codesourcery.com>
77 * mi/mi-main.h (mi_print_timing_maybe): Add strict prototype,
80 2009-03-17 Hui Zhu <teawater@gmail.com>
82 * stack.c: Include valprint.h.
83 (disassemble_next_line): New enum.
84 (show_disassemble_next_line): New function. Show the current
85 value of disassemble-next-line.
86 (gdb_disassembly_stub_args): New struct for argument passing
87 between function do_gdb_disassembly and function
89 (gdb_disassembly_stub): New function. Helper for
91 (do_gdb_disassembly): New function. Use TRY_CATCH to catch
92 the exception from the gdb_disassembly because it will be
93 broken by filter sometime.
94 (print_frame_info): If disassemble-next-line is set to auto
95 or on and doesn't have the line debug messages for $pc,
96 output the next instruction.
97 If disassemble-next-line is set to on and there is line debug
98 messages, output assembly codes for next line.
99 (_initialize_stack): Make the "set disassemble-next-line"
100 command an auto-boolean command. Change its class to
101 class_stack. Place it in the top level set list. Extend help
102 to describe the auto mode.
104 2009-03-17 Pedro Alves <pedro@codesourcery.com>
106 * infrun.c (normal_stop): Don't overwrite old_chain.
108 2009-03-16 Joel Brobecker <brobecker@adacore.com>
110 * remote-mips.c (mips_load): Replace call to regcache_set_valid_p,
111 which is undefined, by call to regcache_invalidate, which should
112 do what the original author wanted to do.
114 2009-03-16 Joel Brobecker <brobecker@adacore.com>
116 * remote-mips.c (mips_mourn_inferior): Add missing ops parameter.
117 (mips_create_inferior): Likewise.
119 2009-03-16 Joel Brobecker <brobecker@adacore.com>
121 * go32-nat.c (go32_create_inferior): Add missing ops parameter.
123 2009-03-16 Joel Brobecker <brobecker@adacore.com>
125 * darwin-nat.c (darwin_resume): Fix a compiler warning when
126 building on x86_64-darwin.
128 2009-03-16 Tristan Gingold <gingold@adacore.com>
130 * configure.tgt: Add handling for x86_64-darwin.
132 2009-03-16 Jan Kratochvil <jan.kratochvil@redhat.com>
134 * auxv.c (fprint_target_auxv): New TAG for AT_RANDOM.
136 2009-03-15 Joel Brobecker <brobecker@adacore.com>
138 * aix-thread.c (aix_thread_thread_alive, aix_thread_pid_to_str):
139 Use the ops parameter to get to the target beneath, rather than
140 using the current_target global. Using the current_target global
141 was an unintended accident.
143 2009-03-15 Joel Brobecker <brobecker@adacore.com>
145 Fix an error happening while loading symbols from a core file
148 * rs6000-nat.c (xcoff_relocate_symtab): Use target_has_execution
149 to detect whether we're debugging a core file or not.
151 2009-03-15 Joel Brobecker <brobecker@adacore.com>
153 Modernize the aix-thread later by getting rid of the base_target
154 global. This brings back to life the AIX port which was otherwise
155 crashing all the time.
157 * aix-thread.c (base_target): Delete.
158 (pd_enable): Do not set base_target.
159 (aix_thread_attach): Use find_target_beneath instead of base_target.
160 (aix_thread_detach, aix_thread_resume, aix_thread_wait)
161 (aix_thread_fetch_registers, aix_thread_store_registers),
162 (aix_thread_xfer_partial, aix_thread_mourn_inferior)
163 (aix_thread_thread_alive, aix_thread_pid_to_str): Likewise.
164 (aix_thread_kill): Delete. Does not seem necessary.
165 (init_aix_thread_ops): Do not set aix_thread_ops.to_kill.
167 2009-03-15 Jan Kratochvil <jan.kratochvil@redhat.com>
169 * stack.c (return_command <retval_exp>): New variables retval_expr
170 and old_chain. Inline parse_and_eval to initialize retval_expr. Check
171 RETVAL_EXPR for UNOP_CAST and set RETURN_TYPE to the RETURN_VALUE type
172 if RETURN_TYPE is NULL.
175 2009-03-14 Pedro Alves <pedro@codesourcery.com>
177 * remote.c (PACKET_qAttached): New.
178 (remote_query_attached): New.
179 (remote_add_inferior): Add new `attached' argument. Handle it.
180 (remote_notice_new_inferior, remote_start_remote): Adjust to pass
181 -1 to remote_add_inferior in new parameter.
182 (extended_remote_attach_1): Adjust to pass 1 to
183 remote_add_inferior in the new parameter.
184 (extended_remote_create_inferior_1): Adjust to pass 0 to
185 remote_add_inferior in the new parameter.
186 (_initialize_remote): Add "set/show remote query-attached-packet"
189 2009-03-13 Tom Tromey <tromey@redhat.com>
191 * symtab.c (lookup_symbol_in_language): Use a cleanup.
193 2009-03-13 Doug Evans <dje@google.com>
195 * exceptions.h: Clean up some comments on catch_exceptions usage.
196 * exceptions.c: Ditto. Plus mark catch_errors as superseded by
199 2009-02-17 Joel Brobecker <brobecker@adacore.com>
201 The following patch helps getting rid of a warning inside solib-som.c.
203 * source.c (source_full_path_of): Constify parameter filename.
204 * defs.h (source_full_path_of): Update declaration accordingly.
206 2009-03-12 Joel Brobecker <brobecker@adacore.com>
208 * ada-lang.c (ada_evaluate_subexp): Merge case BINOP_REM and
209 BINOP_MOD cases with the handling of case BINOP_DIV and BINOP_MUL.
210 Remove useless op value checks when EVAL_AVOID_SIDE_EFFECTS.
212 2009-03-12 Joel Brobecker <brobecker@adacore.com>
214 * ada-lang.c (ada_evaluate_subexp) <BINOP_DIV>: make sure to
215 promote the operands when noside is EVAL_AVOID_SIDE_EFFECTS.
217 2009-03-12 Joel Brobecker <brobecker@adacore.com>
219 * ada-tasks.c (ada_task_is_alive): Move up and make static.
220 * ada-lang.h (ada_task_is_alive): Remove declaration.
222 2009-03-12 Jerome Guitton <guitton@adacore.com>
224 * ada-lang.c (ada_delta): Change the type of numerators and
225 denominators to DOUBLEST, as they may not fit into a long.
226 (scaling_factor): Ditto.
228 2009-03-12 Jerome Guitton <guitton@adacore.com>
230 * language.c (lang_bool_type): Set lai->bool_type_symbol to NULL.
232 2009-03-12 Joel Brobecker <brobecker@adacore.com>
234 * ada-lang.c (ada_evaluate_subexp) [OP_VAR_VALUE]: For tagged
235 types, if we are unable to determine the actual symbol type
236 from its tag, then use the static approximation instead.
238 2009-03-12 Joel Brobecker <brobecker@adacore.com>
240 Fix crash printing packed record with packed array.
242 * ada-lang.c (ada_modulus_from_name): New function.
243 (ada_modulus): In the case where the type length is bigger than
244 the size of the type used to hold the bounds, try determining
245 the modulus from the type name.
246 (ada_value_primitive_packed_val): Fix bug in the computation of
247 ntarg causing an out-of-buffer invalid access.
249 2009-03-12 Joel Brobecker <brobecker@adacore.com>
251 Fix segfault when printing short_integer'last.
253 * ada-lang.c (ada_find_any_type): Search in the primitive types
254 if a symbol could not be found.
256 2009-03-12 Joel Brobecker <brobecker@adacore.com>
258 * ada-tasks.c (task_states,long_task_states): Add new states
259 Activating and Acceptor_Delay_Sleep. Update the description
260 of state Acceptor_Sleep.
262 2009-03-12 Jonas Maebe <jonas.maebe@elis.ugent.be> (obvious change)
264 Fix a build failure on Darwin following some changes in
265 the profile of some target_ops methods.
267 * darwin-nat.c (darwin_kill_inferior): Add target_ops parameter
269 (darwin_stop_inferior, darwin_detach): Likewise.
271 2009-03-12 Vladimir Prus <vladimir@codesourcery.com>
273 Include token in ^running notification for CLI commands.
275 * mi/mi-main.c (mi_execute_command): Set current_token here.
276 (mi_cmd_execute): Do not set current_token here.
278 2009-03-12 Vladimir Prus <vladimir@codesourcery.com>
282 * mi/mi-main.c (mi_print_timing_maybe): New.
283 (captured_mi_execute_command): Simplify. Output timings to
285 (mi_execute_async_cli_command): Do not print timings.
286 * mi/mi-main.h (mi_print_timing_maybe): Declare.
287 * mi/mi-interp.c (mi_on_normal_stop): Call mi_print_timing_maybe.
289 2009-03-12 Jerome Guitton <guitton@adacore.com>
291 * xcoffread.c (process_linenos): Check if the line in the
292 include table refers to the main source file and, if so,
293 add them to the main subfile.
295 2009-03-12 Joel Brobecker <brobecker@adacore.com>
297 Fix a build failure on AIX introduced after a change in the profile
298 of some of the "methods" in the target_ops structure.
299 * aix-thread.c: Add missing target_ops parameter throughout.
301 Implement Ada task switching on AIX.
302 * aix-thread.c (aix_thread_get_ada_task_ptid): New function.
303 (init_aix_thread_ops): Set aix_thread_ops.to_get_ada_task_ptid.
305 2009-03-11 Daniel Jacobowitz <dan@codesourcery.com>
307 * breakpoint.c (bpstat_check_breakpoint_conditions): Use
308 value_mark and value_free_to_mark.
309 * objfiles.c (free_objfile): Call objfile_free_data before
312 2009-03-10 Hui Zhu <teawater@gmail.com>
314 * disasm.c (gdb_disassembly): Remove unused argument
316 * disasm.h (gdb_disassembly): Ditto.
317 * cli/cli-cmds.c (print_disassembly): Ditto.
318 * mi/mi-cmd-disas.c (mi_cmd_disassemble): Ditto.
320 2009-03-09 Paul Pluzhnikov <ppluzhnikov@google.com>
322 * solib.c (solib_contains_address_p): New function.
323 (solib_name_from_address): Use it.
324 * printcmd.c (display_uses_solib_p): Use it.
325 * solib.h (solib_contains_address_p): Declare it.
327 2009-03-09 Jan Kratochvil <jan.kratochvil@redhat.com>
329 * varobj.c (free_variable): Call value_free.
331 2009-03-09 Jan Kratochvil <jan.kratochvil@redhat.com>
334 * dwarf2read.c (dwarf_decode_macros): New variable `at_commandline'.
335 Move the variable `macinfo_type' out of the loop. Create a new
336 processing pass before the current one to pre-create `current_file'.
337 New complaint on misplaced zero/non-zero definitions/includes.
338 Skip first DW_MACINFO_start_file with `at_commandline' set.
340 2008-03-09 Vladimir Prus <vladimir@codesourcery.com>
342 * solib.c (reload_shared_libraries): Give
343 inferior a chance to reset solib breakpoint.
346 2009-03-08 Christopher Faylor <me+cygwin@cgf.cx>
348 * windows-nat.c (dr): Redefine to use largest possible integer which
350 (cygwin_set_dr): Avoid coercion.
352 2009-03-08 Oswald Buddenhagen <oswald.buddenhagen@trolltech.de>
354 * windows-nat.c (windows_create_inferior): Implement --tty handling on
357 2009-03-06 Paul Pluzhnikov <ppluzhnikov@google.com>
359 Rename solib_address to solib_name_from_address.
360 * breakpoint.c (insert_bp_location, disable_breakpoints_in_shlibs)
361 (disable_breakpoints_in_unloaded_shlib): Update.
362 * printcmd.c (display_uses_solib_p): Likewise.
363 * stack.c (print_frame): Likewise.
367 2009-03-05 Paul Pluzhnikov <ppluzhnikov@google.com>
369 * printcmd.c (do_one_display): Reparse exp_string.
370 (display_uses_solib_p): New function.
371 (clear_dangling_display_expressions): New function.
372 (_initialize_printcmd): Add observer.
373 * solib.c (no_shared_libraries): Swap order of calls to
374 clear_solib and objfile_purge_solibs.
376 2009-03-05 Joel Brobecker <brobecker@adacore.com>
378 Implement the target-specific part of Ada tasking support
381 * dec-thread.c (dec_thread_get_ada_task_ptid): New function.
382 (init_dec_thread_ops): Set the to_get_ada_task_ptid method.
384 2009-03-05 Joel Brobecker <brobecker@adacore.com>
386 Get rid of the global "base_target" and use "find_target_beneath"
387 to find the underlying target.
388 * dec-thread.c (base_target): Delete.
389 (enable_dec_thread): Remove assignement to base_target.
390 (dec_thread_detach, dec_thread_wait, dec_thread_wait)
391 (dec_thread_fetch_registers, dec_thread_store_registers)
392 (dec_thread_mourn_inferior, dec_thread_pid_to_str):
393 Update the function profile if necessary.
394 Use find_target_beneath to call the same method but from
395 the underlying target, removing the need for "base_target".
397 * dec-thread.c (dec_thread_get_regsets, dec_thread_set_regsets):
398 Fix a copy/paste error in a few debug traces...
400 * solib-osf.c (init_so): Use a simpler method for computing
401 the size of lm_info structure. This also gets rid of warning
402 emitted by the compiler.
404 2009-03-05 Pedro Alves <pedro@codesourcery.com>
406 * breakpoint.c (check_duplicates_for): Skip permanent breakpoints
407 duplicates of permanent breakpoints.
409 2009-03-04 Pedro Alves <pedro@codesourcery.com>
411 * inferior.h (notice_new_inferior): Declare.
412 * infcmd.c (notice_new_inferior): New.
413 * remote.c (remote_add_inferior, remote_add_thread): New.
414 (notice_new_inferiors): Rename to...
415 (remote_notice_new_inferior): ... this. Add RUNNING argument.
416 Use remote_add_thread instead of add_thread, passing it the
417 RUNNING argument. Add an inferior with remote_add_inferior. If
418 we just learned about an inferior, call notice_new_inferior.
419 (record_currthread): Adjust.
420 (remote_threads_info): Adjust to use remote_notice_new_inferior.
421 (remote_start_remote, extended_remote_attach_1): Use
423 (process_stop_reply): Adjust. Call remote_notice_new_inferior
424 after handling expedited registers and watchpoint state.
425 (extended_remote_create_inferior_1): Use remote_add_inferior.
427 2009-03-04 Aleksandar Ristovski <aristovski@qnx.com>
429 * infcmd.c (registers_info): Remove register number case.
431 2009-03-03 Pedro Alves <pedro@codesourcery.com>
433 * top.c (quit_target): Check for target_has_execution before
434 killing or detaching from inferiors.
436 2009-03-02 Joel Brobecker <brobecker@adacore.com>
438 Remove some unused routines.
440 * ada-lang.c (is_suppressed_name, ada_suppress_symbol_printing):
442 * ada-lang.c (ada_task_list_iterator_ftype)
443 (iterate_over_live_ada_tasks): Delete.
444 * ada-tasks.c (ada_get_environment_task, iterate_over_live_ada_tasks):
447 2009-03-01 Doug Evans <dje@google.com>
449 * symtab.c: Remove trailing whitespace throughout the file.
450 (expand_line_sal): Fix some typos and whitespace.
452 * Makefile.in (clean): rm -f $(DEPDIR)/*.
454 * Makefile.in (GDB_CFLAGS): Add -I$(srcdir)/common.
455 (init.c): signals/ -> common/.
457 * target.h (target_signal_to_string,target_signal_to_string)
458 (target_signal_from_name,target_signal_to_host_p)
459 (target_signal_from_host,target_signal_to_host): Move to ...
460 * common/gdb_signals.h: ... here. New file.
461 * common/signals.c: Moved here from signals/signals.c.
462 #include gdb_signals.h, remove #include of target.h in gdb case.
463 (target_signal_from_command,default_target_signal_to_host)
464 (default_target_signal_from_host): Move inside #ifndef GDBSERVER.
466 Include thread ID in target_wait debugging output.
467 * infrun.c (print_target_wait_results): New function.
468 (wait_for_inferior,fetch_inferior_event): Call it.
470 2009-02-27 Pedro Alves <pedro@codesourcery.com>
472 * gdb_proc_service.h (struct ps_prochandle): Replace pid_t field
474 * linux-thread-db.c (thread_get_info_callback): Build the ptid
475 using the pid stored in proc_handle.ptid.
476 (thread_from_lwp, thread_db_attach_lwp, enable_thread_event)
477 (check_for_thread_db, thread_db_detach, check_event)
478 (thread_db_mourn_inferior, find_new_threads_callback)
479 (thread_db_find_new_threads_1): Adjust.
480 * proc-service.c (ps_xfer_memory, ps_lgetregs, ps_lsetregs)
481 (ps_lgetfpregs, ps_lsetfpregs, ps_getpid): Adjust.
483 2009-02-27 Phil Muldoon <pmuldoon@redhat.com>
485 * valprint.c (read_string): Rework clean-up logic. Use
486 free_current_contents to clean-up buffer.
488 2009-02-27 Andreas Schwab <schwab@linux-m68k.org>
490 * MAINTAINERS: Update e-mail address.
492 2009-02-26 Phil Muldoon <pmuldoon@redhat.com>
494 * python/python-utils.c (python_string_to_unicode): Always return
496 (python_string_to_target_string): Decrement transient python
498 (python_string_to_host_string): Likewise.
500 2007-02-26 Pedro Alves <pedro@codesourcery.com>
502 * mips-linux-nat.c (mips64_linux_fetch_registers): Pass `ops' to
503 call to super_fetch_registers.
504 (mips64_linux_store_registers): Pass `ops' to call to
505 super_store_registers.
507 2009-02-25 Doug Evans <dje@google.com>
509 * breakpoint.c (insert_bp_location): Add \n to overlay breakpoint
512 * breakpoint.c (disable_breakpoints_in_shlibs): Delete local
513 disabled_shlib_breaks, unused.
515 * printcmd.c (build_address_symbolic): Fix comment.
517 2009-02-25 Hui Zhu <teawater@gmail.com>
519 * cli/cli-script.c (define_command): Add _() to query.
520 * gnu-nat.c (inf_validate_task_sc): Ditto.
521 * infcmd.c (kill_if_already_running): Ditto.
522 (jump_command): Ditto.
523 (attach_command): Ditto.
524 * inflow.c (kill_command): Ditto.
525 * infrun.c (handle_command): Ditto.
526 * maint.c (maintenance_dump_me): Ditto.
527 * memattr.c (mem_delete_command): Ditto.
528 * monitor.c (monitor_interrupt_query): Ditto.
529 * nto-procfs.c (interrupt_query): Ditto.
530 * printcmd.c (undisplay_command): Ditto.
531 * remote-mips.c (mips_kill): Ditto.
532 * remote.c (interrupt_query): Ditto.
533 * solib-irix.c (irix_open_symbol_file_object): Ditto.
534 * solib-osf.c (osf_open_symbol_file_object): Ditto.
535 * solib-pa64.c (pa64_open_symbol_file_object): Ditto.
536 * solib-som.c (som_open_symbol_file_object): Ditto.
537 * solib-svr4.c (open_symbol_file_object): Ditto.
538 * symfile.c (symbol_file_add_with_addrs_or_offsets): Ditto.
539 * target.c (kill_or_be_killed): Ditto.
540 * tracepoint.c (delete_trace_command): Ditto.
541 * top.c (quit_confirm): Add _() to s that will be used
544 2009-02-24 Pierre Muller <muller@ics.u-strasbg.fr>
546 Fix windows-nat.c compilation failure.
548 * windows-nat.c (windows_thread_alive): Fix forward declaration.
549 (get_windows_debug_event): Add ops parameter to call to windows_resume.
551 2009-02-23 Pedro Alves <pedro@codesourcery.com>
553 * remote-sim.c (gdbsim_resume): Add target_ops* argument.
555 2009-02-23 Jay Krell <jay.krell@cornell.edu> (tiny change)
557 * symtab.c (find_line_symtab): Initialize exact to avoid
560 2009-02-23 Pedro Alves <pedro@codesourcery.com>
562 * i386-linux-nat.c (i386_linux_fetch_inferior_registers): Pass
563 `ops' to recursive call.
565 2009-02-23 Pedro Alves <pedro@codesourcery.com>
567 * corelow.c (get_core_registers): Adjust.
568 (core_file_thread_alive): Rename to...
569 (core_thread_alive): ... this.
570 (core_pid_to_str): Try gdbarch_core_pid_to_str first.
571 (init_core_ops): Adjust.
572 (coreops_suppress_target): Delete.
573 (_initialize_corelow): Unconditionally add core_ops.
574 * procfs.c: Include "inf-child.h".
575 (procfs_ops): Delete.
576 (init_procfs_ops): Delete. Reimplement as...
577 (procfs_target): ... this, inheriting from inf-child.
578 (procfs_attach, procfs_detach, procfs_fetch_registers): Adjust.
579 (procfs_prepare_to_store): Delete.
580 (procfs_store_registers, procfs_resume): Adjust.
581 (procfs_open): Delete.
582 (procfs_suppress_run): Delete.
583 (procfs_can_run): Delete.
584 (procfs_mourn_inferior): Adjust.
585 (procfs_init_inferior): Add target_ops parameter. Adjust.
586 (procfs_create_inferior): Don't pass procfs_init_inferior to
587 fork_inferior. Instead call it after fork_inferior returns.
588 (procfs_find_new_threads): Adjust.
589 (_initialize_procfs): Adjust to use procfs_target instead of
591 * sol-thread.c (orig_core_ops, sol_core_ops): Delete.
592 (lwp_to_thread): Use target_thread_alive.
593 (sol_thread_open): Delete.
594 (sol_thread_attach): Delete.
595 (sol_thread_detach, sol_thread_resume, sol_thread_wait)
596 (sol_thread_fetch_registers, sol_thread_store_registers): Adjust
597 to use find_target_beneath.
598 (sol_thread_prepare_to_store, sol_thread_xfer_memory): Delete.
599 (sol_thread_xfer_partial): Adjust to use find_target_beneath.
600 (sol_thread_files_info, sol_thread_kill_inferior): Delete.
601 (check_for_thread_db): New.
602 (sol_thread_notice_signals, sol_thread_create_inferior): Delete.
603 (sol_thread_new_objfile): Call check_for_thread_db.
604 (sol_thread_mourn_inferior): Adjust to use find_target_beneath.
605 (sol_thread_can_run): Delete.
606 (sol_thread_alive): Adjust to use find_target_beneath.
607 (sol_thread_stop): Delete.
608 (rw_common): Use target_write_memory or target_read_memory.
609 (ps_lgetregs, ps_lgetfpregs): Use target_fetch_registers.
610 (ps_lsetregs, ps_lsetfpregs): Use target_store_registers.
611 (solaris_pid_to_str): Remove check for libthread_db initialization
613 (sol_find_new_threads): Remove check for libthread_db
614 initialization failing, or for an invalid inferior_ptid. Adjust
615 to use find_target_beneath.
616 (sol_core_open, sol_core_close, sol_core_detach,
617 sol_core_files_info, sol_find_memory_regions,
618 sol_make_note_section, ignore): Delete.
619 (init_sol_thread_ops): Make it a thread_stratum target. Remove
620 unneeded callback settings.
621 (init_sol_core_ops): Delete.
622 (_initialize_sol_thread): No longer call init_sol_core_ops, set
623 procfs_suppress_run, or hack with core_ops.
625 * target.h (struct target_ops): Add a target_ops * parameter to
626 to_resume, to_fetch_registers, to_store_registers, to_thread_alive
627 and to_find_new_threads.
628 (target_fetch_registers, target_store_registers)
629 (target_thread_alive, target_find_new_threads): Redeclare as
632 * target.c (update_current_target): Do not inherit or de_fault
633 to_resume, to_fetch_registers, to_store_registers,
634 to_thread_alive, to_find_new_threads.
635 (target_resume): Adjust.
636 (target_thread_alive, target_find_new_threads): New.
637 (debug_to_resume, debug_to_fetch_registers): Delete.
638 (target_fetch_registers): New.
639 (debug_to_store_registers): Delete.
640 (target_store_registers): New.
641 (debug_to_thread_alive, debug_to_find_new_threads): Delete.
642 (setup_target_debug): Adjust.
644 * gdbcore.h (core_ops): Delete declaration.
646 * inf-ptrace.c, linux-nat.c, remote.c, amd64-linux-nat.c,
647 inf-child.c, linux-thread-db.c, bsd-uthread.c, inf-ttrace.c,
648 i386-sol2-tdep.c, darwin-nat.c, gnu-nat.c, go32-nat.c,
649 hpux-thread.c, i386-linux-nat.c, i386fbsd-nat.c, monitor.c,
650 nto-procfs.c, remote-m32r-sdi.c, remote-mips.c, windows-nat.c,
651 alphabsd-nat.c, amd64bsd-nat.c, arm-linux-nat.c, armnbsd-nat.c,
652 bsd-kvm.c, hppa-hpux-nat.c, hppa-linux-nat.c, hppabsd-nat.c,
653 hppanbsd-nat.c, i386-darwin-nat.c, i386bsd-nat.c,
654 ia64-linux-nat.c, m32r-linux-nat.c, m68kbsd-nat.c,
655 m68klinux-nat.c, m88kbsd-nat.c, mips-linux-nat.c,
656 mips64obsd-nat.c, mipsnbsd-nat.c, ppc-linux-nat.c, ppcnbsd-nat.c,
657 ppcobsd-nat.c, remote-sim.c, rs6000-nat.c, s390-nat.c,
658 shnbsd-nat.c, sparc-nat.c, sparc-nat.h, spu-linux-nat.c,
659 vaxbsd-nat.c, xtensa-linux-nat.c: Adjust to target_ops changes.
661 * gdbarch.sh (core_pid_to_str): New gdbarch callback.
662 * gdbarch.h, gdbarch.c: Regenerate.
664 * sol2-tdep.c: Include "inferior.h".
665 (sol2_core_pid_to_str): New.
666 * sol2-tdep.h (sol2_core_pid_to_str): Declare.
668 * amd64-sol2-tdep.c (amd64_sol2_init_abi): Set it.
669 * sparc-sol2-tdep.c (sparc32_sol2_init_abi): Set it.
670 * sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Set it.
671 * i386-sol2-tdep.c (i386_sol2_init_abi): Set it.
673 2009-02-22 Doug Evans <dje@google.com>
675 * exec.c (exec_file_attach): Fix comment.
677 2009-02-22 Pedro Alves <pedro@codesourcery.com>
679 Silence a few -Wmissing-prototypes warnings.
682 * alpha-linux-tdep.c (alpha_linux_regset_from_core_section): Make
684 * alpha-osf1-tdep.c (_initialize_alpha_osf1_tdep): Declare.
685 * amd64fbsd-tdep.c (amd64fbsd_init_abi): Make it static.
686 * amd64nbsd-tdep.c (_initialize_amd64nbsd_ndep): Rename to ...
687 (_initialize_amd64nbsd_tdep): ... this.
688 * arm-linux-tdep.c (arm_linux_software_single_step): Make it static.
689 (_initialize_arm_linux_tdep): Declare.
690 * armbsd-tdep.c (armbsd_fpreg_offset): Make it static.
691 * armnbsd-tdep.c (_initialize_arm_netbsd_tdep): Declare.
692 * armobsd-tdep.c (_initialize_armobsd_tdep): Declare.
693 * avr-tdep.c (avr_return_value): Make it static.
694 (avr_frame_unwind_cache): Ditto.
695 * bsd-uthread.c (bsd_uthread_inferior_created): Ditto.
696 (bsd_uthread_solib_loaded): Ditto.
697 (bsd_uthread_solib_unloaded): Ditto.
698 (bsd_uthread_target): Ditto.
699 (_initialize_bsd_uthread): Declare.
700 * cris-tdep.c (crisv32_single_step_through_delay): Make it static.
701 (cris_frame_unwind_cache): Ditto.
702 * frv-tdep.c (frv_return_value): Ditto.
703 * h8300-tdep.c (h8300_use_struct_convention): Ditto.
704 (h8300h_use_struct_convention): Ditto.
705 * hppa-tdep.c (hppa_sign_extend, hppa_low_hppa_sign_extend):
707 * hppa-tdep.h (hppa_low_sign_extend, hppa_sign_extend): Delete
709 * hppabsd-tdep.c: Include hppabsd-tdep.h.
710 (hppabsd_find_global_pointer): Make it static.
711 * hppabsd-tdep.h: New.
712 * hppanbsd-tdep.c: Include hppabsd-tdep.h.
713 (hppabsd_init_abi): Remove declaration.
714 (_initialize_hppabsd_tdep): Remove declaration.
715 (_initialize_hppanbsd_tdep): Declare.
716 * hppaobsd-tdep.c: Include hppabsd-tdep.h.
717 (hppabsd_init_abi): Delete declaration.
718 (hppaobsd_init_abi): Make it static.
719 * i386-nto-tdep.c (_initialize_i386nto_tdep): Declare.
720 * i386nbsd-tdep.c (_initialize_i386nbsd_tdep): Declare.
721 * ia64-linux-tdep.c (_initialize_ia64_linux_tdep): Declare.
722 * ia64-tdep.c (ia64_register_reggroup_p): Make it static.
723 * iq2000-tdep.c (_initialize_iq2000_tdep): Declare.
724 * m32c-tdep.c (m32c_register_reggroup_p): Make it static.
725 (m32c_analyze_prologue, m32c_virtual_frame_pointer): Ditto.
726 (_initialize_m32c_tdep): Declare.
727 * m32r-rom.c (_initialize_m32r_rom): Declare.
728 * m32r-tdep.c (m32r_skip_prologue): Make it static.
729 (m32r_return_value): Ditto.
730 * m68hc11-tdep.c (m68hc11_frame_unwind_cache): Make it static.
731 (m68hc11_return_value): Ditto.
732 * m68klinux-tdep.c (_initialize_m68k_linux_tdep): Declare.
733 * m88k-tdep.c (m88k_frame_cache): Make it static.
734 * mep-tdep.c (mep_gdb_print_insn): Ditto.
735 (mep_return_value): Ditto.
736 (_initialize_mep_tdep): Declare.
737 * mips-irix-tdep.c (_initialize_mips_irix_tdep): Declare.
738 * mips-linux-tdep.c (supply_64bit_reg): Make it static.
739 (mips_linux_syscall_next_pc): Ditto.
740 (_initialize_mips_linux_tdep): Declare.
741 * mips-tdep.c (mips_single_step_through_delay): Make it static.
742 * mipsnbsd-tdep.c (_initialize_mipsnbsd_tdep): Declare.
743 * mn10300-linux-tdep.c (_initialize_mn10300_linux_tdep): Declare.
744 * mn10300-tdep.c (_initialize_mn10300_tdep): Declare.
745 * mt-tdep.c (_initialize_mt_tdep): Declare.
746 * nbsd-tdep.c: Include nbsd-tdep.h.
747 * nto-tdep.c (find_load_phdr): Make it static.
748 (_initialize_nto_tdep): Declare.
749 * ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Make it
751 (_initialize_ppc_linux_tdep): Declare.
752 * remote-m32r-sdi.c (m32r_can_use_hw_watchpoint)
753 (m32r_insert_watchpoint, m32r_remove_watchpoint)
754 (m32r_stopped_data_address, m32r_stopped_by_watchpoint): Make
756 * rs6000-aix-tdep.c (_initialize_rs6000_aix_tdep): Declare.
757 * rs6000-nat.c: Include xcoffread.h.
758 (find_toc_address): Don't extern declare get_toc_offset. Adjust
759 to call xcoff_get_to_offset.
760 * rs6000-tdep.c (ppc_vsx_support_p, ppc_displaced_step_fixup)
761 (rs6000_skip_main_prologue, rs6000_in_solib_return_trampoline)
762 (rs6000_skip_trampoline_code): Make static.
763 * s390-tdep.c (s390_regset_from_core_section): Ditto.
764 * sh-tdep.c (sh_register_reggroup_p): Ditto.
765 * shnbsd-tdep.c (shnbsd_regset_from_core_section): Ditto.
766 (_initialize_shnbsd_tdep): Declare.
767 * solib-frv.c (displacement_from_map): Make static.
768 (_initialize_frv_solib): Declare.
769 * solib-irix.c (fetch_lm_info): Make static.
770 (_initialize_irix_solib): Declare.
771 * solib-som.c: Include solib-som.h.
772 (som_solib_select): Line break.
773 * sparc-tdep.c (sparc_regset_from_core_section): Make static.
774 * sparcnbsd-tdep.c (_initialize_sparnbsd_tdep): Rename to ...
775 (_initialize_sparcnbsd_tdep): ... this.
776 * spu-tdep.c (spu_software_single_step): Make it static.
777 (_initialize_spu_tdep): Declare.
778 * vax-tdep.c (vax_frame_cache): Make it static.
779 * xcoffread.c: Include xcoffread.h.
780 (get_toc_offset): Rename to ...
781 (xcoff_get_toc_offset): ... this.
782 (_initialize_xcoffread): Declare.
784 * xtensa-linux-tdep.c (_initialize_xtensa_linux_tdep): Declare.
785 * xtensa-tdep.c (xtensa_skip_prologue, xtensa_derive_tdep): Make
787 (_initialize_xtensa_tdep): Declare.
789 2008-02-21 Pedro Alves <pedro@codesorcery.com>
791 Silence a few -Wmissing-prototypes warnings.
794 * amd64-nat.c: Include "amd64-nat.h".
795 * fork-child.c (_initialize_fork_child): Ditto.
796 * gcore.c (_initialize_gcore): Ditto.
797 * inf-ptrace.c: Include "inf-ptrace.h".
798 (inf_ptrace_store_registers): Make it static.
799 * linux-nat.c (linux_nat_terminal_ours): Make it static.
800 (_initialize_linux_nat): Declare before definition.
801 * linux-tdep.c: Include "linux-tdep.h".
802 * linux-thread-db.c (_initialize_thread_db): Declare before
804 * proc-service.c (_initialize_proc_service): Ditto.
805 * remote.c (remote_send_printf): Make it static.
806 * solib.c: Include "solib.h".
807 * symfile-mem.c (_initialize_symfile_mem): Declare before
809 * ada-lang.c (ada_la_decode, ada_match_name)
810 (ada_suppress_symbol_printing, ada_is_array_type)
811 (ada_value_ptr_subscript, ada_array_length)
812 (ada_to_static_fixed_value): Make them static.
813 (_initialize_ada_language): Declare before definition.
814 * ada-tasks.c (ada_get_task_number, ada_get_environment_task)
815 (ada_task_list_changed, ada_new_objfile_observer): Make them
817 (_initialize_tasks): Declare before definition.
818 * addrmap.c (_initialize_addrmap): Declare before definition.
819 * auxv.c (default_auxv_parse): Make it static.
820 * bfd-target.c (target_bfd_xfer_partial, target_bfd_xclose): Make
822 * breakpoint.c (remove_sal): Add line break.
823 (expand_line_sal_maybe): Make it static.
824 * cp-name-parser.y: Include "cp-support.h".
825 * cp-valprint.c (cp_find_class_member): Make it static.
826 * eval.c (value_f90_subarray): Ditto.
827 * exceptions.c (print_any_exception): Ditto.
828 * findcmd.c (_initialize_mem_search): Declare before definition.
829 * frame.c (frame_observer_target_changed): Make it static.
830 * gnu-v3-abi.c (gnuv3_find_method_in): Make it static.
831 * inf-child.c: Include "inf-child.h".
832 * inferior.h (valid_inferior_id): Rename to ...
833 (valid_gdb_inferior_id): ... this.
834 * infrun.c (infrun_thread_stop_requested, siginfo_make_value):
836 * jv-lang.c (java_language_arch_info): Make it static.
837 * m2-typeprint.c (m2_get_discrete_bounds): Ditto.
838 * osdata.c (info_osdata_command): Make it static.
839 * regcache.c (regcache_observer_target_changed): Make it static.
840 * reverse.c (_initialize_reverse): Declare before definition.
841 * stabsread.c (cleanup_undefined_types_noname)
842 (cleanup_undefined_types_1): Make them static.
843 * symfile.c (place_section): Make it static.
844 * symtab.c (find_pc_sect_psymtab_closer): Make it static.
845 * target-descriptions.c (_initialize_target_descriptions): Declare
847 * target.c (default_get_ada_task_ptid, find_default_can_async_p)
848 (find_default_is_async_p, find_default_supports_non_stop): Make
850 (target_supports_non_stop): Add prototype.
851 (dummy_pid_to_str): Make it static.
852 * utils.c (_initialize_utils): Declare before definition.
853 * ada-exp.y (_initialize_ada_exp): Declare before definition.
854 * solib-svr4.c (HAS_LM_DYNAMIC_FROM_LINK_MAP): Add a prototype.
855 * target.h (struct target_ops): Add a prototype to the
856 to_can_execute_reverse callback.
857 * macroscope.c (_initialize_macroscope): Declare before definition.
858 * cp-namespace.c (_initialize_cp_namespace): Declare before definition.
859 * python/python.c (_initialize_python): Declare before definition.
860 * tui/tui-command.c: Include "tui/tui-command.h".
861 * tui/tui-data.c (init_content_element, init_win_info): Make them
863 * tui/tui-disasm.c: Include "tui/tui-disasm.h".
864 * tui/tui-interp.c (_initialize_tui_interp): Declare before
866 * tui/tui-layout.c: Include "tui/tui-layout.h".
867 (_initialize_tui_layout): Declare before definition.
868 * tui/tui-regs.c: Include "tui/tui-regs.h".
869 (tui_display_reg_element_at_line): Make it static.
870 (_initialize_tui_regs): Declare before definition.
871 * tui/tui-stack.c (_initialize_tui_stack): Declare before
873 * tui/tui-win.c: Include "tui/tui-win.h".
874 (_initialize_tui_win): Declare before definition.
875 (tui_sigwinch_handler): Make it static. Wrap in ifdef SIGWINCH.
876 * tui/tui-win.h (tui_sigwinch_handler): Delete declaration.
877 (tui_get_cmd_list): Add a prototype.
878 * tui/tui-windata.c: Include tui-windata.h.
879 * tui/tui-wingeneral.c (box_win): Make it static.
880 * cli/cli-logging.c (show_logging_command): Make it static.
881 (_initialize_cli_logging): Declare before definition.
882 * mi/mi-common.c (_initialize_gdb_mi_common): Declare before
885 2009-02-20 Pierre Muller <muller@ics.u-strasbg.fr>
887 Extend use of i386_use_watchpoints to all i386 native files
888 using hardware watchpoints.
889 * go32-nat.c (init_go32_ops): Call i386_use_watchpoints.
890 * i386fbsd-nat.c (_initialize_i386fbsd_nat): Ditto.
891 * windows-nat.c (init_windows_ops): Ditto.
892 * config/i386/nm-cygwin.h: Define I386_WATCHPOINTS_IN_TARGET_VECTOR.
893 * config/i386/nm-cygwin64.h: Ditto.
894 * config/i386/nm-fbsd.h: Ditto.
895 * config/i386/nm-go32.h: Ditto.
897 2009-02-19 Joel Brobecker <brobecker@adacore.com>
899 * ada-typeprint.c (ada_typedef_print): Remove. Unused.
901 2009-02-18 Vladimir Prus <vladimir@codesourcery.com>
903 * mi/mi-interp.c (mi_solib_loaded, mi_solib_unloaded): New.
904 (mi_interpreter_init): Register the above.
905 * solib.c (clear_solib): Notify solib unload.
906 * breakpoint.c (disable_breakpoints_in_unloaded_shlib): Do not
907 disable breakpoints on a.out targets.
909 2009-02-17 Vladimir Prus <vladimir@codesourcery.com>
911 * observer.c (observer_test_first_notification_function)
912 (observer_test_second_notification_function)
913 (observer_test_third_notification_function): Adjust prototype.
915 2009-02-17 Pedro Alves <pedro@codesourcery.com>
917 * Makefile.in (ALL_64_TARGET_OBS): Add amd64-dicos-tdep.o.
918 (ALL_TARGET_OBS): Add dicos-tdep.o.
919 (ALLDEPFILES): Add amd64-dicos-tdep.c and dicos-tdep.c.
920 * configure.tgt (i[34567]86-*-dicos*): Add dicos-tdep.o to
922 (x86_64-*-dicos*): Add dicos-tdep.o and amd64-dicos-tdep.o to
924 * dicos-tdep.h, dicos-tdep.c: New.
925 * amd64-dicos-tdep.c: New.
926 * i386-dicos-tdep.c: Don't include solib.h, solib-target.h or
927 inferior.h. Include dicos-tdep.h.
928 (i386_dicos_init_abi): Call dicos_init_abi.
929 (i386_dicos_bfd_has_symbol_p): Delete.
930 (i386_dicos_osabi_sniffer): Use dicos_load_module_p.
932 * NEWS: Mention x86-64 DICOS target support.
934 2009-02-16 Doug Evans <dje@google.com>
936 * amd64-tdep.c (amd64_skip_prefixes): Renamed from skip_prefixes.
938 (amd64_get_insn_details): Handle more 3-byte opcode insns.
939 (amd64_breakpoint_p): Delete.
940 (amd64_displaced_step_fixup): When fixing up after stepping an int3,
941 don't back up pc to the start of the int3.
942 * i386-tdep.c: #include opcode/i386.h.
943 (i386_skip_prefixes): New function.
944 (i386_absolute_jmp_p): Constify argument.
945 (i386_absolute_call_p,i386_ret_p,i386_call_p,i386_syscall_p): Ditto.
946 (i386_breakpoint_p): Delete.
947 (i386_displaced_step_fixup): Handle unnecessary or redundant prefixes.
948 When fixing up after stepping an int3, don't back up pc to the start
951 2009-02-16 Pedro Alves <pedro@codesourcery.com>
953 * corelow.c (core_close): Don't hardcode the core's pid.
954 (core_open): Find core threads before calling
955 post_create_inferior.
956 (add_to_thread_list, get_core_register_section): Take into account
957 systems where the regset section names encode the pid of the
960 * gdbarch.sh (core_reg_section_encodes_pid): New gdbarch setting.
961 * gdbarch.h, gdbarch.c: Regenerate.
963 * amd64-sol2-tdep.c (amd64_sol2_init_abi): Set it.
964 * i386-sol2-tdep.c (i386_sol2_init_abi): Set it.
965 * sparc-sol2-tdep.c (sparc32_sol2_init_abi): Set it.
966 * sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Set it.
968 2009-02-14 Vladimir Prus <vladimir@codesourcery.com>
970 Include frame information for *stopped due to CLI commands.
972 * ada-tasks.c (ada_normal_stop_observer): Adjust prototype.
973 * infcmd.c (finish_command_continuation): Pass '1' for
974 'print_frame' parameter to the observer.
975 * infrun.c (normal_stop): Don't print mi-specific information
976 here. Pass 'stop_print_frame' to the 'print_frame' parameter
978 * mi/mi-interp.c (mi_on_normal_stop): Adjust prototype.
979 If we need to print frame, and current uiout is not the MI one,
982 2009-02-13 Pierre Muller <muller@ics.u-strasbg.fr>
984 * xtensa-tdep.c (call0_analyze_prologue): Delete BSZ macro.
985 Replace BSZ macro uses by XTENSA_ISA_BSZ macro.
987 2009-02-12 Jan Kratochvil <jan.kratochvil@redhat.com>
990 * dwarf2read.c (process_die <DW_TAG_module>, read_module)
991 (scan_partial_symbols <DW_TAG_module>, add_partial_module): New.
993 2009-02-11 Pierre Muller <muller@ics.u-strasbg.fr>
995 * dwarf2read.c (read_base_type): Set code to TYPE_CODE_CHAR
996 for DW_ATE_signed_char and DW_ATE_unsigned_char
999 2009-02-11 Jim Meyering <meyering@redhat.com>
1000 Jan Kratochvil <jan.kratochvil@redhat.com>
1002 Avoid NULL dereference.
1003 * stack.c (return_command): Guard use of SYMBOL_TYPE (thisfun).
1004 New variable func_type.
1006 2009-02-11 Pedro Alves <pedro@codesourcery.com>
1008 * gdbarch.c: Regenerate.
1010 2009-02-10 Pierre Muller <muller@ics.u-strasbg.fr>
1012 * p-lang.c (is_pascal_string_type): Fix comment.
1013 Determine exact size of char elements for GPC
1015 (pascal_printstr): Handle char width of 2 or 4.
1016 * p-valprint.c (pascal_val_print): Handle char
1019 2009-02-07 Daniel Jacobowitz <dan@codesourcery.com>
1021 * dwarf2read.c (dwarf2_build_psymtabs_hard): Move lowpc and highpc
1022 inside the loop. Only call addrmap_set_empty if the compilation unit
1023 had DW_AT_high_pc and DW_AT_low_pc. Update call to
1024 scan_partial_symbols.
1025 (scan_partial_symbols): Take NEED_PC argument and pass it along with
1027 (add_partial_namespace): Take NEED_PC argument and pass it through.
1028 (add_partial_subprogram): Take NEED_PC argument. Update the addrmap
1031 2009-02-07 Pedro Alves <pedro@codesourcery.com>
1033 * NEWS: Mention inspecting extra signal information, $_siginfo,
1034 and the qXfer:siginfo:read and qXfer:siginfo:write packets.
1036 2009-02-07 Pedro Alves <pedro@codesourcery.com>
1038 * linux-nat.c (PTRACE_SETSIGINFO): Define if PTRACE_GETSIGINFO
1041 2009-02-06 Pedro Alves <pedro@codesourcery.com>
1043 * amd64-linux-nat.c (compat_int_t, compat_uptr_t, compat_time_t)
1044 (compat_timer_t, compat_clock_t, struct compat_timeval)
1045 (compat_sigval_t, compat_siginfo_t): New types.
1046 (cpt_si_pid, cpt_si_uid, cpt_si_timerid, cpt_si_overrun)
1047 (cpt_si_status, cpt_si_utime, cpt_si_stime, cpt_si_ptr)
1048 (cpt_si_addr, cpt_si_band, cpt_si_fd): New defines.
1049 (compat_siginfo_from_siginfo, siginfo_from_compat_siginfo)
1050 (amd64_linux_siginfo_fixup): New.
1051 * linux-nat.c (linux_nat_siginfo_fixup): New.
1052 (siginfo_fixup): New.
1053 (linux_xfer_siginfo): Use siginfo_fixup to convert between the
1054 siginfo layout expected by ptrace and the siginfo layout of the
1056 (linux_nat_set_siginfo_fixup): New.
1057 * linux-nat.h (linux_nat_set_siginfo_fixup): Declare.
1059 2009-02-06 Pedro Alves <pedro@codesourcery.com>
1061 * target.h (enum target_object): Add new TARGET_OBJECT_SIGNAL_INFO.
1062 * infrun.c (siginfo_value_read, siginfo_value_write): New.
1063 (siginfo_value_funcs): New.
1064 (siginfo_make_value): New.
1065 (_initialize_infrun): Create the $_siginfo convenience variable.
1066 * gdbtypes.h (append_composite_type_field_aligned): Declare.
1067 * gdbtypes.c (append_composite_type_field): Rename to...
1068 (append_composite_type_field_aligned): ... this. Add ALIGNMENT
1069 argument. Handle it.
1070 (append_composite_type_field): Rewrite on top of
1071 append_composite_type_field_aligned.
1072 * value.h (internalvar_make_value): New typedef.
1073 (struct internalvar) <make_value>: New field.
1074 (create_internalvar_type_lazy): Declare.
1075 * value.c (create_internalvar): Clear make_value.
1076 (create_internalvar_type_lazy): New.
1077 (value_of_internalvar): If make_value is set use it.
1078 (preserve_values): Skip internal variables that don't have a
1080 * gdbarch.sh (get_siginfo_type): New.
1081 * gdbarch.h, gdbarch.c: Regenerate.
1083 * linux-tdep.h, linux-tdep.c: New.
1084 * amd64-linux-tdep.c: Include "linux-tdep.h".
1085 (amd64_linux_init_abi): Register linux_get_siginfo_type and
1086 linux_get_siginfo_mapper.
1087 * i386-linux-tdep.c: Include "linux-tdep.h".
1088 (i386_linux_init_abi): Register linux_get_siginfo_type and
1089 linux_get_siginfo_mapper.
1090 * arm-linux-tdep.c: Include "linux-tdep.h".
1091 (i386_linux_init_abi): Register linux_get_siginfo_type and
1092 linux_get_siginfo_mapper.
1094 * linux-nat.c (linux_xfer_siginfo): New.
1095 (linux_nat_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO.
1096 * remote.c (PACKET_qXfer_siginfo_read)
1097 (PACKET_qXfer_siginfo_write): New.
1098 (feature remote_protocol_features): Add "qXfer:siginfo:read" and
1099 "qXfer:siginfo:write" features.
1100 (remote_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO.
1101 (_initialize_remote): Add "set/show remote read-siginfo-object"
1102 and "set/show remote write-siginfo-object" commands.
1104 * Makefile.in (ALL_TARGET_OBS): Add linux-tdep.o.
1105 (HFILES_NO_SRCDIR): Add linux-tdep.h.
1106 (ALLDEPFILES): Add linux-tdep.c.
1108 * configure.tgt (arm*-*-linux* | arm*-*-uclinux*)
1109 (i[34567]86-*-linux*, x86_64-*-linux*): Add linux-tdep.o to
1112 2009-02-06 Jim Blandy <jimb@codesourcery.com>
1113 Daniel Jacobowitz <dan@codesourcery.com>
1114 Vladimir Prus <vladimir@codesourcery.com>
1115 Pedro Alves <pedro@codesourcery.com>
1117 * defs.h (enum lval_type): New value: lval_computed.
1118 * value.h (struct lval_funcs): New type.
1119 (allocate_computed_value, value_computed_funcs)
1120 (value_computed_closure): New declarations.
1121 * value.c (struct value): Add a structure to the location union
1122 for computed lvalues, containing 'funcs' and 'closure' members.
1123 (allocate_computed_value, value_computed_funcs)
1124 (value_computed_closure): New functions.
1125 (value_free): For computed lvalues, call the closure's
1126 'free_closure' function before freeing the value itself.
1127 (value_copy): If we're copying an lval_computed value, call the
1128 closure's 'copy_closure' function.
1129 (set_value_component_location): If the original value is a
1130 computed lvalue, then call the closure's 'copy_closure' function.
1131 (value_of_internalvar): If an internal variable's value is a
1132 computed lvalue, make retrieving its value produce an equivalent
1134 * valops.c (value_fetch_lazy): Unlazy computed lvalues by calling
1135 their read function.
1136 (value_assign): Assign to computed lvalues by calling their write
1139 2009-02-06 Pedro Alves <pedro@codesourcery.com>
1141 * linux-nat.c (linux_nat_wait): Adjust.
1142 (linux_nat_pid_to_str): Adjust. Remove call to thread_db_init.
1143 * linux-nat.h (thread_db_init): Delete declaration.
1144 * linux-thread-db.c (target_beneath): Delete.
1145 (thread_db_init): Delete.
1146 (thread_db_detach): Use find_target_beneath.
1147 (thread_db_wait): Adjust interface. Use find_target_beneath.
1148 (thread_db_mourn_inferior): Use find_target_beneath.
1149 (thread_db_can_async_p, thread_db_is_async_p, thread_db_async)
1150 (thread_db_async_mask): Delete.
1151 (thread_db_pid_to_str): Adjust interface. Use
1152 find_target_beneath.
1153 (thread_db_get_thread_local_address): Adjust interface. Use
1154 find_target_beneath.
1155 (init_thread_db_ops): Delete references to delete functions.
1156 * target.c (update_current_target): Don't inherit or default
1157 to_wait. Don't inherit to_pid_to_str and
1158 to_get_thread_local_address.
1159 (target_translate_tls_address): Look for a pushed target that
1160 implements to_get_thread_local_address, and use it instead of
1161 checking for target_get_thread_local_address_p.
1162 (target_wait, target_pid_to_str): Reimplement as functions.
1163 (dummy_pid_to_str): New.
1164 (init_dummy_target): Register it.
1165 (debug_to_wait): Delete.
1166 * target.h (struct target_ops): Make to_wait, to_pid_to_str and
1167 to_get_thread_local_address accept a pointer to struct target_ops.
1168 (target_wait): Delete macro, and declare as function.
1169 (target_pid_to_str): Likewise.
1170 (target_get_thread_local_address)
1171 (target_get_thread_local_address_p): Delete.
1172 (noprocess): Add NORETURN and ATTR_NORETURN tags.
1173 * inf-ptrace.c (inf_ptrace_wait): Adjust.
1174 (inf_ptrace_pid_to_str): New.
1175 (inf_ptrace_target): Use inf_ptrace_pid_to_str.
1176 * aix-thread.c (aix_thread_wait, aix_thread_pid_to_str): Adjust.
1177 * bsd-kvm.c (bsd_kvm_pid_to_str): Adjust.
1178 * bsd-uthread.c (bsd_uthread_wait, bsd_uthread_pid_to_str):
1180 * corelow.c (core_pid_to_str): Adjust.
1181 * darwin-nat.c (darwin_wait, darwin_pid_to_str): Adjust.
1182 * dec-thread.c (dec_thread_wait, dec_thread_pid_to_str): Adjust.
1183 * gnu-nat.c (gnu_wait, gnu_pid_to_str): Adjust.
1184 * go32-nat.c (go32_wait, go32_pid_to_str): Adjust.
1185 * hpux-thread.c (hpux_thread_wait): Adjust.
1186 * inf-ttrace.c (inf_ttrace_wait, inf_ttrace_pid_to_str): Adjust.
1187 * monitor.c (monitor_wait, monitor_pid_to_str): Adjust.
1188 * nto-procfs.c (procfs_wait, procfs_pid_to_str): Adjust.
1189 * procfs.c (procfs_pid_to_str): Adjust.
1190 * remote-m32r-sdi.c (m32r_wait, m32r_pid_to_str): Adjust.
1191 * remote-mips.c (mips_wait): Adjust.
1192 * remote-sim.c (gdbsim_wait, gdbsim_pid_to_str): Adjust.
1193 * remote.c (remote_wait, remote_pid_to_str)
1194 (remote_get_thread_local_address): Adjust.
1195 * rs6000-nat.c (rs6000_wait): Adjust.
1196 * sol-thread.c (procfs_pid_to_str): Adjust declaration.
1197 (sol_thread_wait, solaris_pid_to_str): Adjust.
1198 * spu-linux-nat.c (spu_child_wait): Adjust.
1199 * windows-nat.c (windows_wait, windows_pid_to_str): Adjust.
1201 2009-02-06 Tom Tromey <tromey@redhat.com>
1203 * Makefile.in (SUBDIR_PYTHON_OBS): Add python-cmd.o.
1204 (SUBDIR_PYTHON_SRCS): Add python-cmd.c.
1205 (python-cmd.o): New target.
1206 * cli/cli-decode.c (set_cmd_completer): Add self parameter to
1207 completer prototype.
1208 (add_cmd): Initialize destroyer member of cmd_list_element. Use
1209 make_symbol_completion_list_fn as completer.
1210 (delete_cmd): Call destroyer if one is set.
1211 * cli/cli-decode.h (cmd_list_element): Add cmd parameter to
1212 completer member. Add destroyer member.
1213 (set_cmd_completer): Add self parameter to
1214 completer prototype.
1215 * command.h (set_cmd_completer): Add cmd parameter to
1216 completer prototype.
1217 * completer.c (noop_completer, filename_completer,
1218 location_completer, expression_completer, command_completer): Adapt
1219 to new completer prototype.
1220 (complete_line_internal): Pass new parameter to completer function.
1221 * completer.h (noop_completer, filename_completer,
1222 location_completer, expression_completer, command_completer): Adapt
1223 prototypes to new completer prototype.
1224 * interps.c (interpreter_completer): Adapt to new completer
1226 * python/python-cmd.c: New file.
1227 * python/python-internal.h (gdbpy_initialize_commands): Add
1229 (gdbpy_doc_cst): Add forward declaration.
1230 * python/python.c (gdbpy_doc_cst): Declare.
1231 (_initialize_python): Call gdbpy_initialize_commands. Initialize
1233 * symtab.c (make_symbol_completion_list_fn): New function.
1234 * symtab.h (make_symbol_completion_list_fn): Add prototype.
1236 2009-02-06 Pedro Alves <pedro@codesourcery.com>
1238 * target.c (target_get_osdata): Check for equal or higher than
1239 process_stratum, not dummy_stratum.
1241 2009-02-06 Pedro Alves <pedro@codesourcery.com>
1243 * remote.c (extended_remote_can_run): Delete.
1244 (init_remote_ops): Don't register it.
1245 * target.c (target_get_osdata): Don't check for target_can_run.
1246 Instead any target that has already been pushed, otherwise
1247 fallback to the default run target.
1249 2009-02-06 Pedro Alves <pedro@codesourcery.com>
1251 * target.c (target_create_inferior, target_detach)
1252 (target_mourn_inferior, target_attach, target_close): Do target
1254 (debug_to_attach, debug_to_detach, debug_to_create_inferior)
1255 (debug_to_mourn_inferior, debug_to_close): Delete.
1256 (setup_target_debug): Adjust.
1258 2009-02-05 Pedro Alves <pedro@codesourcery.com>
1260 * target.h (target_stopped_data_address_p): Delete declaration,
1261 and don't define as macro.
1262 * target.c (target_stopped_data_address_p): Delete.
1264 2009-02-05 Thiago Jung Bauermann <bauerman@br.ibm.com>
1265 Tom Tromey <tromey@redhat.com>
1267 * python/python-utils.c (target_string_to_unicode): New function.
1268 * python/python-internal.h (target_string_to_unicode): New prototype.
1269 * python/python-value.c (valpy_string): New function.
1270 (value_object_methods): Add `string' entry.
1272 2009-02-05 Pedro Alves <pedro@codesourcery.com>
1274 * target.h (target_tid_to_str): Delete.
1275 * thread.c (print_thread_info, thread_apply_all_command)
1276 (thread_apply_command, thread_command, do_captured_thread_select):
1277 Use target_pid_to_str instead of target_tid_to_str.
1278 * linux-fork.c (delete_fork_command): Likewise.
1280 2009-02-05 Pedro Alves <pedro@codesourcery.com>
1282 * frame.c (has_stack_frames): Make public.
1283 (get_prev_frame): Don't allow a NULL this_frame anymore.
1284 * frame.h (has_stack_frames): Declare.
1285 * varobj.c (find_frame_addr_in_frame_chain): Don't ever pass NULL
1286 to get_prev_frame, instead start at get_current_frame.
1287 (varobj_create): Check has_stack_frames before getting any frame;
1288 eliminate one usage of deprecated_safe_get_selected_frame.
1290 2009-02-05 Tom Tromey <tromey@redhat.com>
1291 Thiago Jung Bauermann <bauerman@br.ibm.com>
1293 * python/python.c (GdbMethods): Move to bottom of file.
1294 (get_parameter, execute_gdb_command, gdbpy_write,
1295 gdbpy_flush): Remove forward declarations.
1296 (eval_python_from_control_command): Fix error checking of function
1297 PyRun_SimpleString. Fix error string.
1298 (python_command): Likewise.
1299 (execute_gdb_command): Added from_tty argument.
1301 2009-02-05 Thiago Jung Bauermann <bauerman@br.ibm.com>
1303 * language.h (language_dfn): Add la_get_string member.
1304 (LA_GET_STRING): New macro.
1305 (default_get_string): New prototype.
1306 * language.c (default_get_string): New function.
1307 (unknown_language_defn, auto_language_defn, local_language_defn): Use
1308 default_get_string for la_get_string.
1309 * c-lang.c (c_get_string): New function.
1310 (c_language_defn, cplus_language_defn, asm_language_defn): Use
1311 c_get_string for la_get_string.
1312 (minimal_language_defn): Likewise
1313 * ada-lang.c (ada_language_defn): Likewise.
1314 * f-lang.c (f_language_defn): Use default_get_string for
1316 * jv-lang.c (java_language_defn): Likewise.
1317 * m2-lang.c (m2_language_defn): Likewise.
1318 * objc-lang.c (objc_language_defn): Likewise.
1319 * p-lang.c (p_language_defn): Likewise.
1320 * scm-lang.c (scm_language_defn): Likewise.
1321 * typeprint.c (type_to_string): New function.
1322 * value.h (type_to_string): New prototype.
1323 * valprint.c (val_print_string): Factor out code for reading string
1324 from the inferior into its own function. Put 2 spaces after period
1326 (read_string): New function.
1327 * valprint.h (read_string): New prototype.
1329 2009-01-07 Pierre Muller <muller@ics.u-strasbg.fr>
1330 Tom Tromey <tromey@redhat.com>
1332 PR breakpoints/8079:
1333 * breakpoint.c (print_one_breakpoint): Use exp_string field
1334 to display expression of watchpoints.
1335 (mention): Likewise.
1336 (watch_command_1): Remove trailing whitespace from expression.
1337 * printcmd.c (struct display) <exp_string>: New field.
1338 (display_command): Set exp_string.
1339 (free_display): Free exp_string.
1340 (clear_displays): Use free_display.
1341 (do_one_display): Print exp_string.
1342 (display_info): Likewise.
1344 2009-02-04 Tom Tromey <tromey@redhat.com>
1345 Thiago Jung Bauermann <bauerman@br.ibm.com>
1346 Phil Muldoon <pmuldoon@redhat.com>
1348 * python/python-internal.h (gdbpy_get_value_from_history): Rename
1349 prototype to gdbpy_history.
1350 (gdbpy_is_string): Declare.
1351 (python_string_to_host_string): Declare.
1352 * python/python-utils.c (gdbpy_is_string): New function.
1353 (unicode_to_encoded_string): New function.
1354 (unicode_to_target_string): Use it.
1355 (python_string_to_host_string): New function.
1356 * python/python-value.c (valpy_address): New function.
1357 (convert_value_from_python): Use gdbpy_is_string. Change to throw
1358 Python exception instead of a GDB exception on error. Properly check
1360 (valpy_getitem): Convert field name to host string. Handle array
1361 accesses. Adapt to new behaviour of convert_value_from_python.
1362 (valpy_new): Adapt to new behaviour of convert_value_from_python.
1363 (enum valpy_opcode) <VALPY_LSH, VALPY_RSH, VALPY_BITAND,
1364 VALPY_BITXOR, VALPY_BITOR>: New constants.
1365 (valpy_binop): Update. Adapt to new behaviour of
1366 convert_value_from_python.
1367 (valpy_invert): New function.
1368 (valpy_lsh): Likewise.
1369 (valpy_rsh): Likewise.
1370 (valpy_and): Likewise.
1371 (valpy_or): Likewise.
1372 (valpy_xor): Likewise.
1373 (valpy_richcompare): Call convert_value_from_python instead of doing
1375 (is_intlike, valpy_int, valpy_long, valpy_float): New functions.
1376 (gdbpy_get_value_from_history): Rename
1377 function to gdbpy_history.
1378 (gdbpy_initialize_values): Don't set tp_new.
1379 (value_object_type): Add valpy_new.
1380 (value_object_methods): Add `address' entry.
1381 (value_object_as_number): Update for new methods.
1382 * python/python.c (GdbMethods): Rename entry from
1383 `get_value_from_history' to `history'.
1385 2009-02-04 Jerome Guitton <guitton@adacore.com>
1387 * ada-lang.c (ada_template_to_fixed_record_type_1): Check size
1388 of type to guard against a crash.
1390 2009-02-04 Jerome Guitton <guitton@adacore.com>
1392 * value.c (value_from_contents_and_address): Always return
1393 a lval_memory value, even if address is null.
1395 2009-02-04 Tristan Gingold <gingold@adacore.com>
1397 * i386-darwin-tdep.c (i386_darwin_sigcontext_addr): New function.
1398 (amd64_darwin_sigcontext_addr): Ditto.
1399 (darwin_dwarf_signal_frame_p): Ditto.
1400 (i386_darwin_init_abi): Handle signal frames, use the const for
1402 (x86_darwin_init_abi_64): Ditto.
1404 2009-02-04 Tristan Gingold <gingold@adacore.com>
1406 * i386-tdep.c (i386_sigtramp_p): Make it public.
1407 * i386-tdep.h (i386_sigtramp_p): Declare.
1409 2009-02-04 Tristan Gingold <gingold@adacore.com>
1411 * machoread.c (macho_symfile_read): Read minsymtab also from
1413 (macho_symfile_read): Try to read dwarf2 frame info from main
1414 object file, but not from OSO files.
1415 (macho_symfile_offsets): Update section names for latest BFD
1417 * i386-darwin-tdep.c (i386_darwin_init_abi): Call set_solib_ops.
1418 (x86_darwin_init_abi_64): Ditto.
1419 * solib-darwin.c: New file.
1420 * solib-darwin.h: New file.
1421 * configure.tgt: Add solib.o solib-darwin.o for Darwin.
1423 2009-02-04 Tristan Gingold <gingold@adacore.com>
1425 * solist.h (struct target_so_ops): Comment fallback behavior for
1428 2009-02-03 Tom Tromey <tromey@redhat.com>
1430 * completer.c (add_struct_fields): Check type_name against NULL
1433 2009-02-03 Joel Brobecker <brobecker@adacore.com>
1435 * MAINTAINERS: Update Elena's email address.
1437 2009-02-02 Joel Brobecker <brobecker@adacore.com>
1439 * breakpoint (update_watchpoint): Minor comment adjustment.
1441 2009-02-02 Tom Tromey <tromey@redhat.com>
1444 * completer.c (count_struct_fields): Count method names.
1445 (add_struct_fields): Add matching method names.
1447 2009-02-02 Doug Evans <dje@google.com>
1449 * configure.ac (gdbkt): Check both no_tcl/no_tk first, before
1450 doing any further tcl/tk configury. Don't configure gdbtk if
1451 tcl or tk check fails.
1452 * aclocal.m4: Regenerate.
1453 * configure: Regenerate.
1455 2009-02-02 Tom Tromey <tromey@redhat.com>
1458 * valops.c (find_overload_match): Follow typedefs before taking
1459 address of object argument.
1461 2009-02-01 Doug Evans <dje@google.com>
1463 * target.h (target_waitstatus_to_string): Declare.
1464 * target.c (target_waitstatus_to_string): New function. Copied from
1465 debug_to_wait. Add missing entries for TARGET_WAITKIND_SYSCALL_ENTRY,
1466 TARGET_WAITKIND_SYSCALL_RETURN, TARGET_WAITKIND_IGNORE,
1467 TARGET_WAITKIND_NO_HISTORY.
1468 (debug_to_wait): Call it.
1469 * infrun.c (wait_for_inferior): If debug_infrun, print result of
1471 (fetch_inferior_event): Ditto.
1473 2009-01-30 Tom Tromey <tromey@redhat.com>
1475 * Makefile.in (HFILES_NO_SRCDIR): Remove i386-cygwin-tdep.h.
1477 2009-01-30 Vladimir Prus <vladimir@codesourcery.com>
1480 * thread.c (do_captured_list_thread_ids): Report the current
1483 2009-01-30 Vladimir Prus <vladimir@codesourcery.com>
1485 * breakpoint.c (create_breakpoint, create_breakpoints)
1486 (break_command_really, set_breakpoint): New parameter enabled.
1487 (create_breakpoint, break_command_really): Make breakpoint
1488 disabled if so requested.
1489 * breakpoint.h (set_breakpoint): New parameter enabled.
1490 * mi/mi-cmd-break.c (mi_cmd_break_insert): Handle the -d option.
1492 2009-01-28 Doug Evans <dje@google.com>
1494 * amd64-tdep.h (amd64_displaced_step_copy_insn): Declare.
1495 (amd64_displaced_step_fixup): Declare.
1496 * amd64-tdep.c: #include opcode/i386.h, dis-asm.h.
1497 (amd64_arch_regmap): Move out of amd64_analyze_stack_align
1498 and make static global.
1499 (amd64_arch_regmap_len): New static global.
1500 (amd64_arch_reg_to_regnum): New function.
1501 (struct amd64_insn): New struct.
1502 (struct displaced_step_closure): New struct.
1503 (onebyte_has_modrm,twobyte_has_modrm): New static globals.
1504 (rex_prefix_p,skip_prefixes)
1505 (amd64_insn_length_fprintf,amd64_insn_length_init_dis)
1506 (amd64_insn_length,amd64_get_unused_input_int_reg)
1507 (amd64_get_insn_details,fixup_riprel,fixup_displaced_copy)
1508 (amd64_displaced_step_copy_insn)
1509 (amd64_absolute_jmp_p,amd64_absolute_call_p,amd64_ret_p)
1510 (amd64_call_p,amd64_breakpoint_p,amd64_syscall_p)
1511 (amd64_displaced_step_fixup): New functions.
1512 * amd64-linux-tdep.c: #include arch-utils.h.
1513 (amd64_linux_init_abi): Install displaced stepping support.
1515 2009-01-28 Daniel Jacobowitz <dan@codesourcery.com>
1516 Jerome Guitton <guitton@adacore.com>
1518 * configure, config.in: Regenerated.
1519 * configure.ac: Add --with-system-gdbinit.
1520 * main.c (get_init_files): New.
1521 (captured_main): Use get_init_files. Load system gdbinit before
1523 (print_gdb_help): Print location of init files.
1525 2009-01-28 Pedro Alves <pedro@codesourcery.com>
1527 * corefile.c (generic_search): Delete disabled code.
1528 * gdbcore.h (generic_search): Delete declaration.
1530 2009-01-26 Pedro Alves <pedro@codesourcery.com>
1532 * linux-nat.c (linux_child_follow_fork): Copy attach_flag from the
1533 parent to the child.
1534 * inf-ttrace.c (inf_ttrace_follow_fork): Likewise.
1535 * inf-ptrace.c (inf_ptrace_follow_fork): Likewise. Use
1536 remove_breakpoints to remove breakpoints from the parent.
1538 2009-01-26 Pedro Alves <pedro@codesourcery.com>
1540 PR backtrace/9458, PR backtrace/8864:
1541 * frame.c (create_new_frame): Update the frame's cached PC before
1542 finding its unwinder. Use frame_id_build to build the new frame's
1544 * stack.c (parse_frame_specification_1): Correct setting ``addrs''
1545 array values from the ``args'' array values.
1547 2009-01-26 Pedro Alves <pedro@codesourcery.com>
1549 * gdbtypes.c (alloc_type, alloc_type_instance, create_range_type)
1550 (create_array_type, create_set_type, init_flags_type)
1551 (copy_type_recursive): Replace pairs of calls to XALLOC and memset
1552 with a call to XZALLOC or XCALLOC, and pairs of calls to
1553 obstack_alloc and memset with a call to OBSTACK_ZALLOC.
1555 2009-01-26 Pedro Alves <pedro@codesourcery.com>
1557 Add "maint set|show internal-error|internal-warning quit|corefile
1558 ask|yes|no" commands.
1561 * utils.c (internal_problem_ask, internal_problem_yes)
1562 (internal_problem_no, internal_problem_modes): New.
1563 (struct internal_problem): Remove FIXME. Make should_quit and
1564 should_dump_core types to char *.
1565 (internal_vproblem, internal_error_problem)
1566 (internal_warning_problem): Adjust.
1567 (set_internal_problem_cmd, show_internal_problem_cmd): New dummy
1569 (add_internal_problem_command): New.
1570 (_initialize_utils): New.
1572 2009-01-25 Pedro Alves <pedro@codesourcery.com>
1574 * infcmd.c (program_info): Use paddress instead of casting stop_pc
1577 2009-01-24 Pedro Alves <pedro@codesourcery.com>
1579 * infrun.c (normal_stop): Don't call
1580 deprecated_update_frame_pc_hack.
1581 * frame.c (deprecated_update_frame_pc_hack)
1582 (deprecated_update_frame_base_hack): Delete, and ...
1583 (create_new_frame): ... inline here.
1584 * frame.h (deprecated_update_frame_pc_hack)
1585 (deprecated_update_frame_base_hack): Delete declarations.
1587 2009-01-23 Pedro Alves <pedro@codesourcery.com>
1589 * cli/cli-decode.c (add_setshow_zuinteger_cmd): New.
1590 * cli/cli-setshow.c (do_setshow_command): Handle it.
1591 * command.h (enum var_types): Add var_zuinteger.
1592 (add_setshow_zuinteger_cmd): Declare.
1594 * valprint.c (_initialize_valprint): Change the set input-radix
1595 and set output-radix commands to zuinteger type.
1597 2009-01-23 Pedro Alves <pedro@codesourcery.com>
1600 * infrun.c (normal_stop): Tag threads as stopped, and run the
1601 hook-stop before printing the stack frame.
1603 2009-01-22 Pedro Alves <pedro@codesourcery.com>
1606 * gnu-v3-abi.c (gnuv3_baseclass_offset): Call check_typedef on
1609 2009-01-20 Kazu Hirata <kazu@codesourcery.com>
1611 * gdb/procfs.c (info_mappings_callback): Cast map->pr_size to
1614 2009-01-20 Daniel Jacobowitz <dan@codesourcery.com>
1617 * infcmd.c (signal_command): Do not specify a resume PC.
1619 2009-01-19 Doug Evans <dje@google.com>
1621 * dummy-frame.c (dummy_frame): Replace regcache member with
1623 (dummy_frame_push): Replace caller_regcache arg with caller_state.
1624 All callers updated.
1625 (remove_dummy_frame,pop_dummy_frame,lookup_dummy_frame): New fns.
1626 (dummy_frame_pop): Rewrite. Verify requested frame is in the
1627 dummy frame stack. Restore program state.
1628 (cleanup_dummy_frames): Rewrite.
1629 (dummy_frame_sniffer): Update. Make static.
1630 * dummy-frame.h (regcache,frame_info): Delete forward decls.
1631 (inferior_thread_state): New forward decl.
1632 (dummy_frame_push): Update prototype.
1633 * frame.c (frame_pop): dummy_frame_pop now does all the work for
1635 * infcall.c (breakpoint_auto_delete_contents): Delete.
1636 (get_function_name,run_inferior_call): New fns.
1637 (call_function_by_hand): Simplify by moving some code to
1638 get_function_name, run_inferior_call. Inferior function call wrapped
1639 in TRY_CATCH so there's less need for cleanups and all exits from
1640 proceed are handled similarily. Detect program exit.
1641 Detect program stopping in a different thread.
1642 Make error messages more consistent.
1643 * inferior.h (inferior_thread_state): Declare (opaque type).
1644 (save_inferior_thread_state,restore_inferior_thread_state,
1645 make_cleanup_restore_inferior_thread_state,
1646 discard_inferior_thread_state, get_inferior_thread_state_regcache):
1648 (save_inferior_status): Update prototype.
1649 * infrun.c: (normal_stop): When stopped for the completion of an
1650 inferior function call, verify the expected stack frame kind.
1651 (inferior_thread_state): New struct.
1652 (save_inferior_thread_state,restore_inferior_thread_state,
1653 do_restore_inferior_thread_state_cleanup,
1654 make_cleanup_restore_inferior_thread_state,
1655 discard_inferior_thread_state,
1656 get_inferior_thread_state_regcache): New functions.
1657 (inferior_status): Move stop_signal, stop_pc, registers to
1658 inferior_thread_state. Remove restore_stack_info.
1659 (save_inferior_status): Remove arg restore_stack_info.
1660 All callers updated. Remove saving of state now saved by
1661 save_inferior_thread_state.
1662 (restore_inferior_status): Remove restoration of state now done by
1663 restore_inferior_thread_state.
1664 (discard_inferior_status): Remove freeing of registers, now done by
1665 discard_inferior_thread_state.
1667 2009-01-18 Pedro Alves <pedro@codesourcery.com>
1669 * tui/tui-disasm.c (tui_vertical_disassem_scroll): Scroll one line
1670 at a time, times NUM_TO_SCROLL.
1671 * tui/tui-winsource.c (tui_horizontal_source_scroll): Don't try to
1672 fetch the selected frame if there is no stack.
1674 2009-01-18 Pedro Alves <pedro@codesourcery.com>
1677 * gdbthread.h (finish_thread_state, finish_thread_state_cleanup):
1679 * thread.c (finish_thread_state, finish_thread_state_cleanup): New.
1680 * infrun.c (wait_for_inferior, fetch_inferior_event): If an error
1681 is thrown while handling an event, finish the thread state.
1682 (normal_stop): Use finish_thread_state cleanup.
1683 * infcmd.c (run_command_1): If an error is thrown while starting
1684 the inferior, finish the thread state.
1686 2009-01-18 Pedro Alves <pedro@codesourcery.com>
1688 * tui/tui-winsource.c (tui_update_breakpoint_info): In asm layout,
1689 skip breakpoints without a location (pending breakpoints).
1691 2009-01-18 Pedro Alves <pedro@codesourcery.com>
1694 * hppa-hpux-tdep.c (hppa_hpux_write_pc): Remove 'return'.
1696 2009-01-18 Nick Roberts <nickrob@snap.net.nz>
1698 * thread.c (thread_command): Move call to annotate_thread_changed
1700 (do_captured_thread_select): ... here, to avoid printing an
1701 annotation if the thread change generates an exception.
1703 2009-01-16 Joel Brobecker <brobecker@adacore.com>
1705 * NEWS: Document x86_64/MinGW as a new native configuration.
1707 2009-01-16 Joel Brobecker <brobecker@adacore.com>
1709 * NEWS: Move the documentation of "info os processes" to
1710 the appropriate section (documenting the new commands).
1712 2009-01-15 Doug Evans <dje@google.com>
1714 * target.h (target_signal_to_string): Make return type const char *.
1715 (target_signal_to_name): Ditto.
1716 (target_signal_from_name): Make arg const char *.
1717 * infrun.c (sig_print_info): Update.
1718 * signals/signals.c (signals): Make array and struct members const.
1719 (target_signal_to_string): Make return type const char *.
1720 (target_signal_to_name): Ditto.
1721 (target_signal_from_name): Make arg const char *.
1723 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
1724 Tristan Gingold <gingold@adacore.com>
1726 * solist.h (struct target_so_ops): New member bfd_open.
1727 (solib_find): Add prototype.
1728 (solib_bfd_fopen): Add prototype.
1729 * solib.c (solib_find, solib_bfd_fopen): New functions, extracted
1730 from solib_bfd_open.
1731 (solib_bfd_open): Use ops->bfd_open override if present. Call
1732 solib_find and solib_bfd_open otherwise.
1734 * objfiles.h (OBJF_KEEPBFD): New define.
1735 * objfiles.c (free_objfile): Do not close BFD if OBJF_KEEPBFD
1736 objfile flag is set.
1737 * solib.c (symbol_add_stub): Do not allocate second BFD for
1738 shared library; use OBJF_KEEPBFD flag on solib objfile.
1740 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
1742 * frame.c (get_frame_arch): Abort if called with NULL this_frame.
1744 2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
1746 * value.h (address_of_variable): Add prototype.
1747 (locate_var_value): Remove prototype.
1749 * findvar.c (read_var_value): Do not attempt to default frame
1751 (locate_var_value): Remove function.
1752 * valops.c (value_of_variable): Retrieve selected frame for
1753 symbols that require a frame when called with NULL block.
1754 * valops.c (address_of_variable): New function.
1756 * eval.c (evaluate_subexp_for_address): Call address_of_variable
1757 instead of calling locate_var_value.
1758 (evaluate_subexp_with_coercion): Likewise.
1760 2009-01-14 Daniel Jacobowitz <dan@codesourcery.com>
1762 * NEWS: Document "define" for prefixed commands.
1763 * cli/cli-cmds.c (show_user): Update calls to show_user_1. Call
1764 show_user_1 for prefix commands.
1765 * cli/cli-decode.c (help_cmd_list): Recurse for "help user-defined".
1766 * cli/cli-script.c (validate_comname): Rewrite to handle prefix
1767 commands. Return the containing command list.
1768 (define_command, document_command): Update to handle prefix commands.
1769 (show_user_1): Add prefix and name arguments. Handle prefix
1771 * cli/cli-script.h (show_user_1): Update prototype.
1773 2009-01-14 Kai Tietz <kai.tietz@onevision.com>
1775 * mingw-ser.c (console_select_thread): Add return to make
1777 (pipe_select_thread): Likewise.
1778 (file_select_thread): Likewise.
1780 2009-01-14 Pedro Alves <pedro@codesourcery.com>
1782 * mi/mi-main.c (mi_cmd_execute): Clean up parenthesis mess from
1785 2009-01-14 Pedro Alves <pedro@codesourcery.com>
1787 * remote.c (extended_remote_mourn_1): Invalidate our notion of
1788 current general thread.
1790 2009-01-14 Pedro Alves <pedro@codesourcery.com>
1792 * mi/mi-main.c (mi_cmd_execute): Also allow -list-thread-groups
1793 without a live selected thread.
1795 2009-01-14 Joel Brobecker <brobecker@adacore.com>
1797 Update the copyright notice of some of the files I missed
1798 in the previous copyright update.
1800 2009-01-14 Joel Brobecker <brobecker@adacore.com>
1802 * windows-nat.c (handle_unload_dll): Use %p to print the DLL
1803 base address instead of casting it to DWORD.
1805 2009-01-13 Ulrich Weigand <uweigand@de.ibm.com>
1807 * dwarf2loc.c (dwarf2_evaluate_loc_desc): Do not call get_frame_arch
1808 for NULL frame pointers.
1810 2009-01-13 Mark Kettenis <kettenis@gnu.org>
1812 * utils.c (host_address_to_string): Reimplement in a way that
1813 avoids the cast of the address to long.
1815 2009-01-13 Joel Brobecker <brobecker@adacore.com>
1817 * mdebugread.c (parse_symbol): Save the symbol private data
1818 using SYMBOL_VALUE_BYTES instead of SYMBOL_VALUE.
1819 (psymtab_to_symtab_1): Likewise.
1820 (parse_procedure): Declare variable "e" only in the scope
1821 where it is used. Extract the symbol private data using
1824 2009-01-13 Jim Blandy <jimb@codesourcery.com>
1826 Abstract out common code for copying value locations.
1828 * value.h (set_value_component_location): New declaration.
1829 * value.c (set_value_component_location): New function.
1830 (value_primitive_field): Use it.
1831 * valarith.c (value_subscript, value_subscripted_rvalue): Same.
1832 * valops.c (search_struct_field, value_slice): Same.
1833 * ada-lang.c (coerce_unspec_val_to_type)
1834 (ada_value_primitive_packed_val): Same.
1836 2009-01-13 Joel Brobecker <brobecker@adacore.com>
1838 * MAINTAINERS (GLOBAL MAINTAINERS): Add Tom Tromey.
1840 2009-01-12 Christopher Faylor <me+cygwin@cgf.cx>
1842 * amd64-windows-nat.c Rename gdb-specific win32_* to windows_*
1844 * i386-cygwin-tdep.c: Ditto.
1845 * i386-windows-nat.c: Ditto.
1846 * windows-nat.h: Ditto.
1847 * windows-tdep.c: Ditto.
1848 * windows-tdep.h: Ditto.
1849 * windows-nat.c: Ditto.
1850 (cygwin_load_start): Redefine as CORE_ADDR.
1851 (cygwin_load_end): Ditto.
1852 (windows_make_so): Coerce result of address arithmetic to uintptr_t
1853 before coercing to CORE_ADDR to avoid a compiler warning.
1854 (handle_exception): Define addr as CORE_ADDR and coerce
1855 ExceptionAddress to uintptr_t before assigining to avoid a compiler
1857 * config/djgpp/fnchange.lst: Add mappings for recently renamed windows
1860 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
1862 Fix linking with --enable-targets=all:
1863 * Makefile.in (ALL_TARGET_OBS): Add windows-tdep.o.
1864 (HFILES_NO_SRCDIR): Add windows-tdep.h.
1865 (ALLDEPFILES): Add windows-tdep.c.
1867 2009-01-11 Chris Faylor <me.gdb@cgf.cx>
1869 * win32-nat.h: Delete.
1870 * windows-nat.h: Rename from win32-nat.h.
1871 * win32-nat.c: Delete.
1872 * windows-nat.c: Rename from win32-nat.c.
1873 * win32-termcap.c: Delete.
1874 * windows-termcap.c: Rename from win32-termcap.c.
1875 * amd64-windows-nat.c: Handle rename from win32-nat.h -> windows-nat.h.
1876 * configure.ac: Handle rename from win32-termcap.c ->
1878 * configure: Regenerate.
1879 * gdb_curses.h: Change comment to reflect rename from win32-termcap.c
1880 -> windows-termcap.c.
1881 * i386-cygwin-tdep.c: Handle rename from win32-tdep.h ->
1883 * i386-windows-nat.c: Refect rename from win32-nat.h -> windows-nat.h.
1884 * windows-nat.c: Ditto. Also reflect rename from from win32-tdep.h ->
1886 (win32_make_so): Handle cygwin compiler warning due to change of
1887 load_addr from DWORD to LPVOID.
1888 (handle_load_dll): Use %p in format string to properly print address
1889 and avoid a compiler warning.
1890 (DEBUG_EXCEPTION_SIMPLE): Ditto.
1891 (handle_exception): Ditto.
1892 * windows-tdep.c: Handle rename from win32-tdep.h -> windows-tdep.h.
1893 * config/i386/cygwin.mh: Handle rename from win32-nat.o ->
1895 * config/i386/mingw.mh: Ditto.
1896 * config/i386/mingw64.mh: Ditto.
1898 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
1900 * f-typeprint.c (f_type_print_varspec_suffix): Convert the autovariable
1901 arrayprint_recurse_level to a parameter. Update all the callers. New
1902 comment at autovariables.
1904 2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
1906 * gdbtypes.c (make_qualified_type, replace_type): Reformat to the GNU
1909 2009-01-11 Joel Brobecker <brobecker@adacore.com>
1911 * target.c (target_xfer_partial): Use host_address_to_string to
1912 print the address of readbuf and writebuf. Cast the address of
1913 elements inside the myaddr buffer into intptr_t.
1914 (deprecated_debug_xfer_memory): Use paddress to print memaddr.
1915 Cast the address of elements inside the myaddr buffer into
1918 2009-01-11 Joel Brobecker <brobecker@adacore.com>
1920 * amd64-windows-nat.c, amd64-windows-tdep.c: New files.
1921 * config/i386/mingw64.mh, config/i386/nm-cygwin64.h: New files.
1922 * configure.host, configure.tgt: Add handling for x86_64/windows.
1923 * config/djgpp/fnchange.lst: Add entries for amd64-windows-nat.c
1924 and amd64-windows-tdep.c.
1926 2009-01-11 Joel Brobecker <brobecker@adacore.com>
1928 * win32-tdep.h, win32-tdep.c: New files.
1929 * i386-cygwin-tdep.h: Delete.
1930 * i386-cygwin-tdep.c: Include win32-tdep.h instead of
1932 (win32_xfer_shared_library): Delete. Moved to win32-tdep.c.
1933 * win32-nat.c: Likewise.
1934 * configure.tgt: Add win32-tdep.o to the list of target object
1935 files for i386-cygwin and i386-mingw targets.
1937 2009-01-11 Joel Brobecker <brobecker@adacore.com>
1939 * win32-nat.h: New file.
1940 * win32-nat.c (mappings): Initialize to NULL.
1941 (win32_set_context_register_offsets): New function.
1942 * i386-windows-nat.c: New file.
1943 (mappings): Moved here from win32-nat.c.
1944 (_initialize_i386_windows_nat): New function.
1945 * config/i386/mingw.mh (NATDEPFILES): Add i386-windows-nat.o.
1946 * config/i386/cygwin.mh (NATDEPFILES): Likewise.
1948 2009-01-09 Andreas Schwab <schwab@suse.de>
1950 * Makefile.in (init.c): Set LANG/LC_ALL to C, not c.
1952 2009-01-09 Daniel Jacobowitz <dan@codesourcery.com>
1954 * gdbtypes.c (append_composite_type_field): Correct the location of
1957 2009-01-09 Pedro Alves <pedro@codesourcery.com>
1959 * defs.h (deprecated_error_hook): Delete declaration.
1960 * interps.c (clear_interpreter_hooks): Adjust.
1961 * remote-sim.c (gdb_os_error): Don't try to call
1962 deprecated_error_hook. No need to call exit anymore.
1963 * top.c (deprecated_error_hook): Delete.
1965 2009-01-09 Joel Brobecker <brobecker@adacore.com>
1967 * arch-utils.c (gdbarch_update_p): Use host_address_to_string
1968 to print the address of the gdbarch pointer.
1970 2009-01-09 Joel Brobecker <brobecker@adacore.com>
1972 * gdbarch.sh: Fix all the compilation errors on amd64-windows
1973 due to casting a pointer to a long when printing a function
1974 address. Instead, use host_address_to_string to convert our
1975 address to a string.
1976 * gdbarch.c: Regenerate.
1978 2009-01-09 Joel Brobecker <brobecker@adacore.com>
1980 * event-top.c (async_disconnect, async_stop_sig): use "raise"
1981 instead of "kill" to raise a signal.
1983 2009-01-09 Joel Brobecker <brobecker@adacore.com>
1985 * win32-nat.c (get_module_name): Change the type of parameter
1986 "base_address" to LPVOID. Remove unnecessary cast.
1987 (struct lm_info): Change type of load_addr to LPVOID.
1988 (win32_make_so): Change the type of parameter "load_addr"
1989 to LPVOID. Remove some unnecessary casts.
1990 (handle_unload_dll): Change the type of "lpBaseOfDll" to LPVOID.
1991 (win32_xfer_shared_libraries): Add missing cast.
1993 2009-01-09 Joel Brobecker <brobecker@adacore.com>
1995 * win32-nat.c (has_detach_ability, set_process_privilege):
1996 Cast the result of GetProcAddress to (void *) to avoid
1997 a compilation warning.
1999 2009-01-09 Joel Brobecker <brobecker@adacore.com>
2001 * win32-nat.c (CONTEXT_EXTENDED_REGISTERS): Define to 0 if not
2004 2009-01-09 Joel Brobecker <brobecker@adacore.com>
2006 * win32-nat.c (get_image_name, win32_xfer_memory): Fix type
2007 definition of local variable "done".
2008 (info_w32_command, handle_exception): Remove unnecessary cast.
2010 2009-01-09 Joel Brobecker <brobecker@adacore.com>
2012 * win32-nat.c (kernel32_DebugSetProcessKillOnExit): Renames
2013 DebugSetProcessKillOnExit. Update all uses in this file.
2014 (kernel32_DebugActiveProcessStop): Renames DebugActiveProcessStop.
2015 Update all uses in this file.
2017 2009-01-09 Joel Brobecker <brobecker@adacore.com>
2019 * win32-nat.c (do_initial_win32_stuff): Add new ops parameter,
2020 and use it when pushing the target.
2021 (win32_attach, win32_create_inferior): Update call to
2022 do_initial_win32_stuff.
2023 (win32_detach, win32_mourn_inferior): Use our ops parameter
2024 instead of the global win32_ops to unpush the target.
2026 2009-01-09 Joel Brobecker <brobecker@adacore.com>
2028 * ser-mingw.c (ser_windows_open): Use proper type when casting
2029 in call to _open_osfhandle.
2031 2009-01-09 Kai Tietz <kai.tietz@onevision.com>
2033 * coff-pe-read.c (read_pe_exported_syms): Fix typo.
2035 2009-01-09 Joel Brobecker <brobecker@adacore.com>
2037 * CONTRIBUTE: Minor reformatting.
2039 2009-01-08 Kai Tietz <kai.tietz@onevision.com>
2041 * MAINTAINERS: Add myself to Write After Approval.
2042 * coff-pe-read.c (read_pe_exported_syms): Enable read of PE+
2045 2009-01-08 Nathan Froyd <froydnj@codesourcery.com>
2047 * remote-sim.c (gdb_os_error): Mark as a noreturn function.
2048 Call exit to make it obvious to GCC.
2050 2009-01-08 Tom Tromey <tromey@redhat.com>
2052 PR breakpoints/9350:
2053 * varobj.c (varobj_invalidate): Unconditionally free
2055 * symfile.c (syms_from_objfile): Free local_addr when returning
2057 * exec.c (exec_file_attach): Do cleanups before returning.
2058 (exec_file_command): Likewise.
2059 * corefile.c (reopen_exec_file): Do cleanups before returning.
2060 * breakpoint.c (insert_breakpoint_locations): Do cleanups before
2062 (do_vec_free): New function.
2063 (update_global_location_list): Make a cleanup for old_locations.
2064 Do cleanups before returning. Remove unused variable 'e'.
2065 (find_condition_and_thread): Free result of parsing the
2067 (print_it_typical): Do cleanups before returning.
2068 (breakpoint_re_set_one): Always free sals.sals.
2070 2009-01-08 Joel Brobecker <brobecker@adacore.com>
2071 Emi Suzuki <emi-suzuki@tjsys.co.jp>
2073 * breakpoint.c (do_enable_breakpoint): Use update_watchpoint for
2076 2009-01-07 Doug Evans <dje@google.com>
2078 * top.c (gdb_prompt_string): Delete, unused.
2080 2009-01-07 Pedro Alves <pedro@codesourcery.com>
2082 Delete ONE_PROCESS_WRITETEXT leftovers.
2084 * breakpoint.c (insert_bp_location): Delete process_warning
2086 (insert_breakpoint_locations): Adjust.
2087 (reattach_breakpoints): Adjust.
2088 * infrun.c (normal_stop): Drop "It might be running in another
2091 2009-01-07 Stan Shebs <stan@codesourcery.com>
2093 * config/pa/linux.mh (XDEPFILES): Remove.
2095 2009-01-07 Doug Evans <dje@google.com>
2097 * cli/cli-cmds.c (set_debug): Fix cut-n-paste error.
2099 2009-01-07 Jan Kratochvil <jan.kratochvil@redhat.com>
2101 * f-typeprint.c (f_type_print_base <TYPE_CODE_STRUCT>): Fix output
2102 spacing, a regression from 2008-04-22.
2104 2009-01-07 Joel Brobecker <brobecker@adacore.com>
2106 * utils.c (gdb_print_host_address): Adjust implementation to
2107 reuse host_address_to_string. Move comment explaining the conversion
2108 from host address to string from here...
2109 (host_address_to_string): ... to there.
2111 2009-01-07 Emi Suzuki <emi-suzuki@tjsys.co.jp>
2113 * MAINTAINERS: Add myself for write after approval privileges.
2115 2009-01-06 Tom Tromey <tromey@redhat.com>
2117 * value.c (set_internalvar): Use value_free, not xfree.
2119 2009-01-06 Jim Blandy <jimb@red-bean.com>
2121 Check return values of functions declared with warn_unused_result
2122 attribute in GLIBC 2.8.
2123 * cli/cli-cmds.c (pwd_command): Check return value from getcwd.
2124 * inflow.c (check_syscall): New function.
2125 (new_tty): Use check_syscall to check return values from open and dup.
2126 * linux-nat.c (linux_nat_info_proc_cmd): Check return value from fgets.
2127 * main.c (captured_main): Call cwd after setting up gdb_stderr;
2128 check for errors from getcwd.
2129 * mi/mi-cmd-env.c (mi_cmd_env_pwd): Check return value from getcwd.
2130 * ui-file.c (stdio_file_write): Ignore return value from fwrite.
2131 (stdio_file_fputs): Same.
2132 * utils.c (internal_vproblem): abort if last-ditch error message
2135 * top.c (gdb_init): Don't set the current directory here; that's
2136 already been done in captured_main.
2138 2009-01-06 Sandra Loosemore <sandra@codesourcery.com>
2140 * ser-tcp.c: Adjust includes.
2141 (tcp_set_cmdlist, tcp_show_cmdlist): Declare.
2142 (tcp_auto_retry, tcp_retry_limit): Declare.
2143 (TIMEOUT): Remove, in favor of tcp_retry_limit.
2144 (POLL_INTERVAL): Increase to 5, in favor of backoff logic.
2145 (wait_for_connect): New function.
2146 (net_open): Use it. Add auto-retry logic.
2147 (set_tcp_cmd, show_tcp_cmd): New functions.
2148 (_initialize_ser_tcp): Initialize new "set/show tcp auto-retry"
2149 and "set/show tcp connect-timeout" commands.
2150 * NEWS: Document new commands.
2152 2009-01-05 Tom Tromey <tromey@redhat.com>
2154 * python/python-internal.h (Py_ssize_t): Define as int.
2156 2009-01-05 Jim Blandy <jimb@red-bean.com>
2158 * MAINTAINERS: Fix my e-mail address as steering committee member.
2160 2009-01-03 Joel Brobecker <brobecker@adacore.com>
2162 Updated copyright notices for most files.
2164 2009-01-03 Joel Brobecker <brobecker@adacore.com>
2166 * top.c (print_gdb_version): Update copyright year.
2168 2009-01-03 Joel Brobecker <brobecker@adacore.com>
2170 * config/djgpp/fnchange.lst: Add entry for ChangeLog-2008.
2172 2009-01-01 Pedro Alves <pedro@codesourcery.com>
2174 PR breakpoints/9681:
2175 * exceptions.h (enum errors): New error type, MEMORY_ERROR.
2176 * corefile.c (memory_error): Rewrite to throw a MEMORY_ERROR.
2177 * breakpoint.c (fetch_watchpoint_value): Ignore MEMORY_ERRORs, but
2178 retrow all other exceptions.
2180 For older changes see ChangeLog-2008.
2186 version-control: never