1 2010-03-17 Stan Shebs <stan@codesourcery.com>
3 * ax-gdb.c (require_rvalue): Disallow non-scalars.
5 * infcall.c: Include tracepoint.h.
6 (call_function_by_hand): Disallow calls in tfind mode.
7 * infcmd.c: Include tracepoint.h.
8 (ensure_not_tfind_mode): New function.
11 (jump_command): Ditto.
12 (signal_command): Ditto.
13 (advance_command): Ditto.
14 (until_command): Ditto.
15 (finish_command): Ditto.
16 * tracepoint.h (disconnect_or_stop_tracing): Declare.
18 * ax-gdb.h (struct axs_value): New field optimized_out.
19 (gen_trace_for_var): Add gdbarch argument.
20 * ax-gdb.c (gen_trace_static_fields): New function.
21 (gen_traced_pop): Call it, add gdbarch argument.
22 (gen_trace_for_expr): Update call to it.
23 (gen_trace_for_var): Ditto, and report optimized-out variables.
24 (gen_struct_ref_recursive): Check for optimized-out value.
25 (gen_struct_elt_for_reference): Ditto.
26 (gen_static_field): Pass gdbarch instead of expression, assume
27 optimization if field not found.
28 (gen_var_ref): Set the optimized_out flag.
29 (gen_expr): Error on optimized-out variable.
30 * tracepoint.c (collect_symbol): Handle struct-valued vars as
31 expressions, skip optimized-out variables with computed locations.
32 * dwarf2loc.c (dwarf2_tracepoint_var_ref): Flag instead of
33 erroring out if location expression missing.
34 (loclist_tracepoint_var_ref): Don't error out here.
36 2010-03-17 Tom Tromey <tromey@redhat.com>
38 * dwarf2read.c (dwarf2_get_section_info): Handle case where no
39 DWARF data is available.
41 2010-03-17 Daniel Jacobowitz <dan@codesourcery.com>
43 * symfile.c (generic_load): Reset breakpoints after loading.
45 2010-03-17 Tom Tromey <tromey@redhat.com>
47 * linux-nat.c (linux_nat_detach): Check debug_linux_nat.
49 2010-03-17 Jan Kratochvil <jan.kratochvil@redhat.com>
51 * spu-tdep.c (spu_catch_start): Replace set_breakpoint call with the
52 create_breakpoint call, adjust the parameters.
54 2010-03-16 Jan Kratochvil <jan.kratochvil@redhat.com>
55 Chandru <chandru@in.ibm.com>
57 * dwarf2read.c (read_subrange_type): Set TYPE_HIGH_BOUND_UNDEFINED.
58 * valarith.c (value_subscripted_rvalue): Suppress error if
59 TYPE_ARRAY_UPPER_BOUND_IS_UNDEFINED.
61 2010-03-16 Holger Hans Peter Freyther <zecke@selfish.org>
63 * linux-record.c (record_linux_msghdr): Remove unintended semicolons.
65 2010-03-16 Joel Brobecker <brobecker@adacore.com>
67 * ada-tasks.c (task_command_1): Check that the task ptid is valid
68 before doing the associated thread switch.
70 2010-03-16 Daniel Jacobowitz <dan@codesourcery.com>
72 * MAINTAINERS: Update my email address.
74 2010-03-16 Vladimir Prus <vladimir@codesourcery.com>
76 Simplify MI breakpoint setting.
78 * breakpoint.c (break_command_really): Make nonstatic and
80 (create_breakpoint): ...this. Rename prior function by this name
82 (create_breakpoint_sal): ...this.
83 (create_breakpoints): Rename to...
84 (create_breakpoints_sal): ...this.
85 (set_breakpoint): Remove.
86 * breakpoint.h: Adjust to above changes.
87 * mi/mi-cmd-break.c (mi_cmd_break_insert): Simplify.
89 2010-03-15 Stan Shebs <stan@codesourcery.com>
91 * ax-gdb.c: Include cp-support.h.
93 (gen_primitive_field): New function.
94 (gen_struct_ref_recursive): New function.
95 (gen_struct_ref): Rewrite to call gen_struct_ref_recursive instead
97 (gen_static_field): New function.
98 (gen_struct_elt_for_reference): New.
99 (gen_namespace_elt): New.
100 (gen_maybe_namespace_elt): New.
101 (gen_aggregate_elt_ref): New.
102 (gen_expr): Add OP_SCOPE, display opcode name in error message.
104 2010-03-15 Tom Tromey <tromey@redhat.com>
106 * dwarf2read.c (die_needs_namespace): Also return 0 for
109 2010-03-15 Sami Wagiaalla <swagiaal@redhat.com>
112 * cp-support.h: Added char *declaration element to using_direct
114 (cp_add_using): Added char *declaration argument.
115 (cp_add_using_directive): Ditto.
116 (cp_lookup_symbol_imports): made extern.
117 * cp-namespace.c: Updated with the above changes.
118 * dwarf2read.c (read_import_statement): Ditto.
119 (read_namespace): Ditto.
120 (read_import_statement): Support import declarations.
121 * cp-namespace.c (cp_lookup_symbol_imports): Check for imported
123 Added support for 'declaration_only' search.
124 (cp_lookup_symbol_namespace): Attempt to search for the name as
125 is before consideration of imports.
126 * symtab.c (lookup_symbol_aux_local): Added a 'declaration_only'
127 search at every block level search.
128 Now takes language argument.
129 (lookup_symbol_aux): Updated.
131 2010-03-15 Tom Tromey <tromey@redhat.com>
133 * c-exp.y (name_not_typename): Add 'operator' clause.
135 2010-03-15 Ralf Corsepius <ralf.corsepius@rtems.org> (tiny change)
137 * configure.ac: Exit if ${gdb_target_obs}" is not set.
138 * configure: Regenerate.
140 2010-03-15 Jan Kratochvil <jan.kratochvil@redhat.com>
142 * symfile.c (addr_info_make_relative): Ignore also missing ".dynbss"
143 and ".sdynbss". Update the comment.
145 2010-03-15 Jie Zhang <jie@codesourcery.com>
147 * MAINTAINERS: Update my email address.
149 2010-03-14 Daniel Jacobowitz <dan@codesourcery.com>
151 * gdbtypes.h (TYPE_IS_OPAQUE): Correct HAVE_CPLUS_STRUCT check.
153 2010-03-14 Daniel Jacobowitz <dan@codesourcery.com>
155 * charset.c [USE_WIN32API]: Include <windows.h>.
156 (_initialize_charset): Correct type of w32_host_default_charset.
158 2010-03-14 Pedro Alves <pedro@codesourcery.com>
160 * infrun.c (ptid_match): Don't assert that PTID is not a pid ptid.
162 2010-03-12 Tom Tromey <tromey@redhat.com>
165 * dwarf2read.c (die_needs_namespace) <DW_TAG_variable>: A variable
166 in a lexical block does not need a namespace.
167 (new_symbol) <DW_TAG_variable>: Put extern variables on
168 list_in_scope in all cases.
170 2010-03-12 Stan Shebs <stan@codesourcery.com>
172 * ax-gdb.c (gen_expr): Add shift expressions.
173 (gen_expr_binop_rest): Ditto.
175 2010-03-12 Sami Wagiaalla <swagiaal@redhat.com>
177 * buildsym.c (finish_block): Reset using_directives pointer
178 after block initialization.
180 2010-03-12 H.J. Lu <hongjiu.lu@intel.com>
182 * amd64-tdep.c (amd64_word_names): Replace "sp" with "".
183 * i386-tdep.c (i386_word_names): Likewise.
185 2010-03-12 Pedro Alves <pedro@codesourcery.com>
187 * target.c (memory_xfer_partial): Don't use the stack cache if
188 inspecting trace frames.
189 * tracepoint.c (finish_tfind_command): Invalidate the target
192 2010-03-11 Jan Kratochvil <jan.kratochvil@redhat.com>
194 * solib-svr4.c (LM_ADDR_CHECK) <info_verbose>: Use printf_unfiltered
195 for the PIC displacement, print also the displacement value.
196 (svr4_exec_displacement): Print DISPLACEMENT if INFO_VERBOSE.
198 2010-03-10 Kevin Buettner <kevinb@redhat.com>
200 * remote-mips.c (close_ports, mips_initialize_cleanups)
201 (mips_exit_cleanups, mips_send_command, mips_open, pmon_open)
202 (ddb_open, lsi_open, mips_remove_breakpoint, mips_remove_watchpoint)
203 (mips_stopped_by_watchpoint, send_srec, pmon_checkset)
204 (pmon_make_fastrec, pmon_check_ack, mips_expect_download)
205 (pmon_check_entry_address, pmon_check_total, pmon_end_download)
206 (pmon_download, pmon_load_fast, _initialize_remote_mips): Add
207 comments describing each of these functions.
208 (mips_enter_debug, mips_exit_debug, common_open)
209 (mips_signal_from_protocol, pmon_makeb64, pmon_zeroset): Add
210 blank line after the comment describing the function.
212 2010-03-10 Jan Kratochvil <jan.kratochvil@redhat.com>
214 * solib-svr4.c (svr4_exec_displacement): Return now success, new
215 parameter displacementp. Update comment.
216 (svr4_relocate_main_executable): Return if non-zero SECTION_OFFSETS
217 element exists. Return if svr4_exec_displacement was not successful.
220 2010-03-10 Jan Kratochvil <jan.kratochvil@redhat.com>
221 Daniel Jacobowitz <dan@codesourcery.com>
223 * solib-svr4.c (read_program_header): Support type == -1 to read
225 (read_program_headers_from_bfd): New function.
226 (svr4_static_exec_displacement): Remove and move the comment ...
227 (svr4_exec_displacement): ... here. Remove variable found. New
228 variable displacement. Check also DYNAMIC. Verify DISPLACEMENT
229 alignment for ELF targets. Compare target vs. exec_bfd PHDRs for ELF
230 targets using read_program_headers_from_bfd. Remove the call of
231 svr4_static_exec_displacement.
233 2010-03-10 Tom Tromey <tromey@redhat.com>
235 * dwarf2read.c (struct pubnames_header): Remove.
236 (_PUBNAMES_HEADER): Remove.
237 (_ACTUAL_PUBNAMES_HEADER_SIZE): Remove.
238 (struct aranges_header): Remove.
239 (_ARANGES_HEADER, _ACTUAL_ARANGES_HEADER_SIZE): Remove.
240 (struct dwarf2_per_objfile) <pubnames, aranges>: Remove.
241 (PUBNAMES_SECTION): Remove.
242 (ARANGES_SECTION): Remove.
243 (dwarf2_locate_sections): Don't handle pubnames or aranges.
244 (dwarf2_build_psymtabs): Remove dead code.
245 (dwarf2_build_psymtabs_easy): Remove.
247 2010-03-10 Tom Tromey <tromey@redhat.com>
249 * elfread.c (elf_symfile_read): Don't call
250 dwarf2_build_frame_info.
251 * dwarf2read.c (struct dwarf2_section_info) <readin>: New field.
252 (struct dwarf2_per_objfile) <objfile>: New field.
253 (dwarf2_has_info): Now idempotent. Set objfile field.
254 (dwarf2_read_section): Check and set readin field. Call
256 (dwarf2_build_psymtabs): Don't read all sections.
257 (read_type_comp_unit_head): Read types section.
258 (create_debug_types_hash_table): Likewise.
259 (init_cu_die_reader): Add asserts.
260 (process_type_comp_unit): Add assert.
261 (dwarf2_build_psymtabs_hard): Read info section.
262 (load_partial_comp_unit): Add assert.
263 (create_all_comp_units): Read info section.
264 (load_full_comp_unit): Likewise.
265 (dwarf2_ranges_read): Read ranges section.
266 (dwarf2_record_block_ranges): Add assert.
267 (dwarf2_read_abbrevs): Read abbrev section.
268 (read_indirect_string): Read str section.
269 (dwarf_decode_line_header): Read line section.
270 (read_signatured_type_at_offset): Read types section.
271 (dwarf_decode_macros): Read macinfo section.
272 (dwarf2_symbol_mark_computed): Read loc section.
273 * dwarf2-frame.c (dwarf2_frame_find_fde): Call
274 dwarf2_build_frame_info.
275 (dwarf2_build_frame_info): Unconditionally set
276 dwarf2_frame_objfile_data on the objfile.
277 * configure.ac: Check for posix_madvise.
278 * config.in, configure: Rebuild.
280 2010-03-10 Tom Tromey <tromey@redhat.com>
282 * xcoffread.c (xcoff_start_psymtab): Update.
283 (xcoff_end_psymtab): Update.
284 * psymtab.c (allocate_psymtab): Remove dead code.
285 * psympriv.h (struct partial_symtab) <read_symtab_private>: Now
287 * mdebugread.c (parse_partial_symbols): Update.
288 (new_psymtab): Likewise.
289 * dwarf2read.c (process_psymtab_comp_unit): Update.
290 (psymtab_to_symtab_1): Update.
291 * dbxread.c (start_psymtab): Update.
292 (end_psymtab): Likewise.
294 2010-03-10 Tom Tromey <tromey@redhat.com>
296 * xcoffread.c: Include psymtab.h.
297 (xcoff_sym_fns): Update.
298 * symtab.h (struct partial_symbol): Remove.
299 (PSYMBOL_DOMAIN, PSYMBOL_CLASS): Remove.
300 (struct partial_symtab): Remove.
301 (PSYMTAB_TO_SYMTAB): Remove.
302 (lookup_partial_symbol, lookup_partial_symtab, find_pc_psymtab)
303 (find_pc_sect_psymtab): Remove.
304 (find_pc_sect_symtab_via_partial): Declare.
305 (find_pc_psymtab, find_pc_sect_psymbol, psymtab_to_symtab)
306 (find_main_psymtab): Remove.
307 (find_main_filename): Declare.
308 (fixup_psymbol_section): Remove.
309 (fixup_section): Declare.
310 * symtab.c: Include psymtab.h.
311 (lookup_symtab): Use lookup_symtab method.
312 (lookup_partial_symtab): Remove.
313 (find_pc_sect_psymtab_closer): Remove.
314 (find_pc_sect_psymtab): Remove.
315 (find_pc_sect_symtab_via_partial): New function.
316 (find_pc_psymtab, find_pc_sect_psymbol, find_pc_psymbol): Remove.
317 (fixup_section): No longer static.
318 (fixup_psymbol_section): Remove.
319 (lookup_symbol_aux): Use lookup_symbol_aux_quick.
320 (lookup_global_symbol_from_objfile): Likewise.
321 (lookup_symbol_aux_psymtabs): Remove.
322 (lookup_symbol_aux_quick): New function.
323 (lookup_symbol_global): Use lookup_symbol_aux_quick.
324 (lookup_partial_symbol): Remove.
325 (basic_lookup_transparent_type_quick): New function.
326 (basic_lookup_transparent_type): Use it.
327 (find_main_psymtab): Remove.
328 (find_main_filename): New function.
329 (find_pc_sect_symtab): Use find_pc_sect_symtab method.
330 (find_line_symtab): Use expand_symtabs_with_filename method.
331 (output_partial_symbol_filename): New function.
332 (sources_info): Use map_partial_symbol_filenames.
333 (struct search_symbols_data): New type.
334 (search_symbols_file_matches): New function.
335 (search_symbols_name_matches): Likewise.
336 (search_symbols): Use expand_symtabs_matching method.
337 (struct add_name_data): Rename from add_macro_name_data.
338 (add_macro_name): Update.
339 (add_partial_symbol_name): New function.
340 (default_make_symbol_completion_list): Use
341 map_partial_symbol_names.
342 (struct add_partial_symbol_name): New type.
343 (maybe_add_partial_symtab_filename): New function.
344 (make_source_files_completion_list): Use
345 map_partial_symbol_filenames.
346 (expand_line_sal): Use expand_symtabs_with_filename method.
347 * symmisc.c: Include psymtab.h.
348 (print_objfile_statistics): Use print_stats method.
349 (dump_objfile): Use dump method.
350 (dump_psymtab, maintenance_print_psymbols)
351 (maintenance_info_psymtabs, maintenance_check_symtabs)
352 (extend_psymbol_list): Remove.
353 * symfile.h (struct quick_symbol_functions): New struct.
354 (struct sym_fns) <qf>: New field.
355 (sort_pst_symbols): Remove.
356 (increment_reading_symtab): Declare.
357 * symfile.c: Include psymtab.h.
358 (compare_psymbols, sort_pst_symbols): Remove.
359 (psymtab_to_symtab): Remove.
360 (increment_reading_symtab): New function.
361 (symbol_file_add_with_addrs_or_offsets): Use expand_all_symtabs
363 (set_initial_language): Use find_main_filename.
364 (allocate_psymtab, discard_psymtab, cashier_psymtab): Remove.
365 (free_named_symtabs): Remove unused code.
366 (start_psymtab_common, add_psymbol_to_bcache)
367 (append_psymbol_to_list, add_psymbol_to_list, init_psymbol_list):
369 * stack.c: Include psymtab.h, symfile.h.
370 (backtrace_command_1): Use find_pc_sect_symtab_via_partial.
371 * source.h (psymtab_to_fullname): Don't declare.
372 * source.c: Include psymtab.h.
373 (select_source_symtab): Use find_last_source_symtab method.
374 (forget_cached_source_info): Use forget_cached_source_info
376 (find_and_open_source): No longer static.
377 (psymtab_to_fullname): Remove.
378 * somread.c: Include psymtab.h.
379 (som_sym_fns): Update.
380 * psympriv.h: New file.
381 * psymtab.h: New file.
382 * psymtab.c: New file.
383 * objfiles.h: (ALL_OBJFILE_PSYMTABS): Remove.
384 (ALL_PSYMTABS, ALL_PSPACE_PSYMTABS): Likewise.
385 * objfiles.c: Include psymtab.h.
386 (objfile_relocate1): Use relocate method.
387 (objfile_has_partial_symbols): Use has_symbols method.
388 * mipsread.c: Include psymtab.h.
389 (ecoff_sym_fns): Update.
390 * mi/mi-cmd-file.c: Include psymtab.h.
391 (print_partial_file_name): New function.
392 (mi_cmd_file_list_exec_source_files): Use
393 map_partial_symbol_filenames.
394 * mdebugread.c: Include psympriv.h.
395 * machoread.c: Include psympriv.h.
396 (macho_sym_fns): Update.
397 * m2-exp.y (yylex): Use lookup_symtab.
398 * elfread.c: Include psympriv.h.
399 (elf_sym_fns): Update.
400 * dwarf2read.c: Include psympriv.h.
401 * dbxread.c: Include psympriv.h.
402 (aout_sym_fns): Update.
403 * cp-support.c: Include psymtab.h.
404 (read_in_psymtabs): Remove.
405 (make_symbol_overload_list_qualified): Use
406 expand_symtabs_for_function method.
407 * coffread.c: Include psympriv.h.
408 (coff_sym_fns): Update.
409 * blockframe.c: Include psymtab.h.
410 (find_pc_partial_function): Use find_pc_sect_symtab method.
411 * ada-lang.h (ada_update_initial_language): Update.
412 * ada-lang.c: Include psymtab.h.
413 (ada_update_initial_language): Remove 'main_pst' argument.
414 (ada_lookup_partial_symbol): Remove.
415 (struct ada_psym_data): New type.
416 (ada_add_psyms): New function.
417 (ada_add_non_local_symbols): Use map_ada_symtabs method.
418 (struct add_partial_datum): New type.
419 (ada_add_partial_symbol_completions): New function.
420 (ada_make_symbol_completion_list): Use map_partial_symbol_names.
421 (ada_exception_support_info_sniffer): Update.
422 * Makefile.in (SFILES): Add psymtab.c.
423 (COMMON_OBS): Add psymtab.o.
424 (HFILES_NO_SRCDIR): Add psymtab.h, psympriv.h.
426 2010-03-10 Pierre Muller <muller@ics.u-strasbg.fr>
428 * remote-fileio.c (cygwin_conv_path): Define macro for old cygwin API.
430 2010-03-10 Sami Wagiaalla <swagiaal@redhat.com>
433 * cp-namespace.c (cp_add_using): Deleted.
434 (cp_add_using_directive): Use obstack allocations.
435 Merged the function cp_add_using into this one.
436 Added 'struct obstack *' argument.
437 (cp_scan_for_anonymous_namespaces): Updated.
438 * cp-support.h: Updated.
439 * dwarf2read.c (read_import_statement): Updated.
440 (read_namespace): Updated.
442 2010-03-10 Pierre Muller <muller@ics.u-strasbg.fr>
444 * windows-nat.c (cygwin_conv_path): Remove old macro.
446 2010-03-10 Pedro Alves <pedro@codesourcery.com>
448 * breakpoint.c (condition_command): Handle watchpoint conditions.
449 (is_hardware_watchpoint): Add comment.
450 (is_watchpoint): New.
451 (update_watchpoint): Don't reparse the watchpoint's condition
454 (watchpoint_check): Use it.
455 (bpstat_check_watchpoint): Handle it.
456 (bpstat_check_breakpoint_conditions): Evaluate watchpoint local
457 conditions in a frame where it makes sense.
458 (watch_command_1): Store the innermost block of the condition
460 (delete_breakpoint): Delete the watchpoint condition expression.
461 * breakpoint.h (struct bp_location) <cond>: Update comment.
462 (struct breakpoint): New field `cond_exp_valid_block'.
464 2010-03-09 Joel Brobecker <brobecker@adacore.com>
466 Adjust handling of Ada DIEs after dwarf2_physname patch.
467 * dwarf2read.c (dwarf2_compute_name): Add handling of Ada DIEs.
469 2010-03-09 Christopher Faylor <me+cygwin@cgf.cx>
470 Pierre Muller <muller@ics.u-strasbg.fr>
472 * windows-nat.c (cygwin_conv_path): Redefine to properly convert
474 (windows_make_so): Use non-Cygwin 1.7 specific function.
475 (windows_create_inferior): Make sure that cygallargs points to
476 original args in non Cygwin 1.7. case.
478 2010-03-09 Michael Snyder <msnyder@vmware.com>
480 * i386-tdep.c (i386_record_lea_modrm_addr): Use extract_signed_int
481 after target_read_memory to get host byte order.
482 (i386_process_record): Ditto.
484 2010-03-09 Keith Seitz <keiths@redhat.com>
486 Based on work from Daniel Jacobowitz <dan@codesourcery.com>
487 * c-typeprint.c (cp_type_print_method_args): For non-static methods,
488 print out const or volatile qualifiers, too.
489 (c_type_print_args): Add parameters show_artificial and language.
490 Skip artificial parameters when requested.
491 Use the appropriate language printer.
492 (c_type_print_varspec): Tell c_type_print_args to skip artificial
493 parameters and pass language_c.
494 * dwarf2read.c (die_list): New file global.
495 (struct partial_die_info): Update comments for name field.
496 (pdi_needs_namespace): Renamed to ...
497 (die_needs_namespace): ... this. Rewrite.
498 (dwarf2_linkage_name): Remove.
499 (add_partial_symbol): Do not predicate the call to
500 partial_die_full_name based on pdi_needs_namespace.
501 Remove call to cp_check_possible_namespace_symbols and associated
503 (guess_structure_name): Do not inspect child subprogram DIEs.
504 (dwarf2_fullname): Update comments.
505 Use die_needs_namespace to assist in computing the name.
506 (read_func_scope): Use dwarf2_name to get the DIE's name.
507 Use dwarf2_physname to get the "linkage name" of the DIE.
508 (dwarf2_add_member_field): Use dwarf2_physname instead of
510 (read_structure_type): For structs and classes, set TYPE_NAME, too.
511 (determine_class): Remove.
512 (read_partial_die): Ignore DW_AT_MIPS_linkage_name for all languages
514 (new_symbol): Unconditionally call dwarf2_name.
515 Compute the "linkage name" using dwarf2_physname.
516 Use dwarf2_name instead of dwarf2_full_name for enumerator DIEs.
517 When determining to scan for anonymous C++ namespaces, ignore
519 (dwarf2_physname): New function.
520 (dwarf2_full_name): Move content to new function and call
522 (dwarf2_compute_name): "New" function.
523 (_initialize_dwarf2_read): Initialize die_list.
524 * gnu-v3-eabi.c (gnu_v3_find_method_in): Remove unused variable
526 (gnu_v3_print_method_ptr): Use the physname for virtual methods
527 without a demangled name.
528 Print out type information for non-virtual methods.
529 * linespec.c (decode_line_1): Force ANY string using "::" (or
530 "." for java) to use decode_compound, and clean up any stray quoting.
531 If we found a file symtab, re-evaluate whether the remainder is_quoted.
532 (decode_compound): Stop consuming at an open parenthesis.
533 Keep template parameters.
534 Keep any overload information.
535 Keep keywords like "const".
536 Remove paren_pointer.
537 Move is_quoted check from set_flags to here.
538 Remove #if 0 code from 2000. Ten years is long enough.
539 (find_method): Before comparing symbol names, canonicalize the string
541 If a specific overload is requested, find it. Otherwise throw an error.
542 (find_method_overload_end): New function.
544 (decode_compound): Assume that parentheses are matched.
546 * symtab.c (symbol_find_demangled_name): Add DMGL_VERBOSE flag
548 * linespec.c (decode_line_1): Keep important keywords like
549 "const" and "volatile".
550 * symtab.h (SYMBOL_CPLUS_DEMANGLED_NAME): Remove.
551 * typeprint.h (c_type_print_args): Add declaration.
552 * ui-file.c (do_ui_file_obsavestring): New function.
553 (ui_file_obsavestring): New function.
554 * ui-file.h (ui_file_obsavestring): Add declaration.
555 * valops.c (find_overload_match): Resolve the object to
557 If the object is a data member, search the object for the member
558 and return with staticp set.
559 Use SYMBOL_NATURAL_NAME instead of SYMBOL_CPLUS_DEMANGLED_NAME.
560 Do not attempt to extract a function name from non-function types.
561 If the extracted function name and the original name are the same,
562 we don't have a C++ method.
564 From Jan Kratochvil <jan.kratochvil@redhat.com>:
565 * dwarf2read.c (new_symbol <DW_TAG_enumerator>): Call dwarf2_full_name.
567 * ada-lang.c (ada_lookup_symbol): Remove linkage_name parameters
568 and arguments from symbol lookups.
569 * ax-gdb.c (gen_expr): Likewise.
570 * cp-namespace.c (cp_lookup_symbol_nonlocal, lookup_namespace_scope,
571 cp_lookup_symbol_namespace, lookup_symbol_file, lookup_nested_type,
572 lookup_possible_namespace_symbol): Likewise.
573 * cp-support.c (read_in_psymtabs): Likewise.
574 * cp-support.h (cp_lookup_symbol_nonlocal): Likewise.
575 * language.h (la_lookup_symbol_nonlocal): Likewise.
576 * scm-valprint.c (scm_inferior_print): Likewise.
577 * solib-darwin.c (darwin_relocate_section_addresses): Likewise.
578 * solib-svr.c (elf_lookup_lib): Likewise.
579 * solib.c (show_auto_solib_add): Likewise.
580 * solist.h (lookup_lib_global, solib_global_lookup): Likewise.
581 * symmisc.c (maintenance_check_symtabs): Likewise.
582 * symtab.c (lookup_symbol_in_language, lookup_symbol_aux,
583 lookup_symbol_aux_local, lookup_symbol_aux_block,
584 lookup_symbol_from_objfile, lookup_symbol_aux_symtabs,
585 lookup_symbol_aux_psymtabs,basic_lookup_symbol_nonlocal,
586 lookup_symbol_static, lookup_symbol_global, symbol_matches_domain,
587 basic_lookup_transparent_type, find_main_psymtab,
588 lookup_block_symbol): Likewise.
589 * symtab.h (basic_lookp_symbol_nonlocal, lookup_symbol_static,
590 lookup_symbol_global, lookup_symbol_aux_block,
591 lookup_symbol_partial_symbol, lookup_block_symbol,
592 lookup_global_symbol, value_maybe_namespace_elt): Likewise.
594 2010-03-09 Pierre Muller <muller@ics.u-strasbg.fr>
596 * python/python-internal.h: Include symtab.h.
598 2010-03-09 Joel Brobecker <brobecker@adacore.com>
599 Pierre Muller <muller@ics.u-strasbg.fr>
601 * p-lang.c (is_pascal_string_type): Remove unneeded parentheses.
602 * p-valprint.c (pascal_val_print): Remove undeed block and fix
605 2010-03-08 Tom Tromey <tromey@redhat.com>
607 * breakpoint.c (breakpoint_1): Add "QUIT".
609 2010-03-08 Daniel Jacobowitz <dan@codesourcery.com>
610 Pedro Alves <pedro@codesourcery.com>
612 * solib.c (solib_find): Replace extension if
613 solib_symbols_extension is set in the target gdbarch.
614 * arm-symbian-tdep.c (arm_symbian_init_abi): Set
615 solib_symbols_extension to "sym".
616 * gdbarch.sh (solib_symbols_extension): New variable.
617 (pstring): New function.
618 * gdbarch.h, gdbarch.c: Regenerate.
620 2010-03-08 Tom Tromey <tromey@redhat.com>
624 * utils.c: Include main.h.
625 (fputs_maybe_filtered): Don't paginate if `batch_flag'.
626 (defaulted_query): Use default answer if `batch_flag'.
627 * main.h (batch_flag): Declare.
628 * main.c (batch_flag): New global.
629 (captured_main): Remove 'batch'. Update.
631 2010-03-08 Kevin Buettner <kevinb@redhat.com>
633 From Richard Sandiford, Martin M. Hunt, Corinna Vinschen,
636 * remote-mips.c (rockhopper_ops): New target_ops struct.
637 (MON_ROCKHOPPER): New mips_monitor_type.
638 (read_hex_value): New function.
639 (mips_request): Send 8-byte values with a 'T' packet. Read the
640 packet argument as a string and use read_hex_value to parse it.
641 (mips_exit_debug): Wait for response when using MON_ROCKHOPPER.
642 (rockhopper_open): New function.
643 (mips_wait): Read the PC, FP and SP fields as strings. Use
644 read_hex_value to parse them and mips_set_register to commit them.
645 (mips_set_register): New function.
646 (mips_fetch_registers): Do not cast register value to "unsigned"
647 when reading a MON_ROCKHOPPER 't' packet. Use mips_set_register.
648 (mips_store_registers): Use a 'T' packet to set registers when
649 using MON_ROCKHOPPER.
650 (pmon_end_download): Don't run initEther if using MON_ROCKHOPPER
651 and expect the total to be printed before the entry address.
652 (_initialize_remote_mips): Initialize and add rockhopper_ops.
654 2010-03-08 Kevin Buettner <kevinb@redhat.com>
656 * remote-mips.c (mips_fetch_word): Add new parameter, `valp'.
657 Change return value to int. Store value fetched in location
658 addressed by `val'. Use function's return value as success
659 or failure indicator. Adjust all callers.
661 2010-03-08 Pierre Muller <muller@ics.u-strasbg.fr>
663 * p-lang.c (is_pascal_string_type): Check that TYPE arg is non NULL.
665 2010-03-08 Jan Kratochvil <jan.kratochvil@redhat.com>
666 Hui Zhu <teawater@gmail.com>
668 * record.c (record_open_1): Check tmp_to_stopped_by_watchpoint and
669 tmp_to_stopped_data_address.
670 (record_open): Reset tmp_to_stopped_by_watchpoint and
671 tmp_to_stopped_data_address.
672 * target.c (init_dummy_target): Add to_stopped_by_watchpoint and
673 to_stopped_data_address.
675 2010-03-08 Hui Zhu <teawater@gmail.com>
677 * i386-tdep.c (i386_process_record): Initialize regnum.
679 2010-03-08 Jan Kratochvil <jan.kratochvil@redhat.com>
681 * symfile.c (addr_info_make_relative): New variable sect_name, use it.
682 Do not warn on ".gnu.liblist" and ".gnu.conflict".
684 2010-03-08 Joel Brobecker <brobecker@adacore.com>
686 Memory error when reading wrong core file.
687 * solib-svr4.c (solib_svr4_r_map): catch and print all exception
688 errors while reading the inferior memory, and return zero if
689 an exception was raised.
691 2010-03-07 Michael Snyder <msnyder@vmware.com>
693 * record.c (record_restore): Rename tmpu8 to rectype.
695 * i386-tdep.c (i386_record_lea_modrm_addr): Rename local variables
696 tmpu8, tmpi16, tmpi32, tmpulongest to addr8, addr16, addr32, addr64.
698 (i386_record_push): Rename local tmpulongest to addr.
700 (i386_process_record): Rename local tmpulongest to addr.
702 Rename local variables tmpu16, tmpu32, tmpu64 to addr16, addr32,
705 Rename local variable tmpu8 to opcode8 and regnum.
707 2010-03-07 Joel Brobecker <brobecker@adacore.com>
709 * remote.c (remote_get_ada_task_ptid): New function.
710 (init_remote_ops): Set remote_ops.to_get_ada_task_ptid.
712 2010-03-06 Christopher Faylor <me+cygwin@cgf.cx>
714 * windows-nat.c: Reorganize #ifdef __CYGWIN__ considerations into one
715 block. Define helper macros to reduce ifdefs in code.
716 (get_module_name): Use cygwin_buf_t for buffer and __PMAX for buffer
717 size. Call unadorned GetModuleFileNameEx rather than
718 GetModuleFileNameEx*.
719 (windows_make_so): Use __PMAX to denote maximum buffer size and
720 cygwin_buf_t for buffer type. Use GetSystemDirectory{W,A} as
722 (get_image_name): Use __PMAX to denote maximum buffer size.
723 (handle_load_dll): Likewise.
724 (windows_pid_to_exec_file): Likewise.
725 (windows_create_inferior): Add many accommodations for older Cygwin and
727 (bad_GetModuleFileNameExW): Control inclusion of this function based on
728 __USEWIDE conditional.
729 (bad_GetModuleFileNameExA): Likewise.
730 (_initialize_loadable): Just use real function names without the dyn_
731 part since they are defined earlier.
733 2010-03-05 Corinna Vinschen <vinschen@redhat.com>
734 Tom Tromey <tromey@redhat.com>
736 * utils.c (host_char_to_target): Add 'gdbarch' argument.
737 (parse_escape): Likewise.
738 * python/py-utils.c (unicode_to_target_string): Update.
739 (unicode_to_target_python_string): Update.
740 (target_string_to_unicode): Update.
741 * printcmd.c (printf_command): Update.
742 * p-exp.y (yylex): Update.
743 * objc-exp.y (yylex): Update.
744 * mi/mi-parse.c: Include charset.h.
745 (mi_parse_escape): New function.
746 (mi_parse_argv): Use it.
747 * jv-exp.y (yylex): Update.
748 * i386-cygwin-tdep.c (i386_cygwin_auto_wide_charset): New
750 (i386_cygwin_init_abi): Call set_gdbarch_auto_wide_charset.
751 * gdbarch.sh (auto_charset, auto_wide_charset): New.
752 * gdbarch.c: Rebuild.
753 * gdbarch.h: Rebuild.
754 * defs.h (parse_escape): Update.
755 * cli/cli-setshow.c: Include arch-utils.h.
756 (do_setshow_command): Update.
757 * cli/cli-cmds.c (echo_command): Update.
758 * charset.h (target_charset, target_wide_charset): Update.
759 * charset.c: Include arch-utils.h.
760 (target_charset_name): Default to "auto".
761 (target_wide_charset_name): Likewise.
762 (show_target_charset_name): Handle "auto".
763 (show_target_wide_charset_name): Likewise.
764 (be_le_arch): New global.
765 (set_be_le_names): Add 'gdbarch' argument.
766 (validate): Likewise. Don't call set_be_le_names.
767 (set_charset_sfunc, set_host_charset_sfunc)
768 (set_target_charset_sfunc, set_target_wide_charset_sfunc):
770 (target_charset): Add 'gdbarch' argument.
771 (target_wide_charset): Likewise. Remove 'byte_order' argument.
772 (auto_target_charset_name): New global.
773 (default_auto_charset, default_auto_wide_charset): New functions.
774 (_initialize_charset): Set auto_target_charset_name. Allow "auto"
775 for target charsets. Copy result of nl_langinfo. Use GetACP if
777 * c-lang.c (charset_for_string_type): Add 'gdbarch' argument,
778 remove 'byte_order' argument. Update.
779 (classify_type): Likewise.
780 (c_emit_char): Update.
781 (c_printchar): Update.
782 (c_printstr): Update.
783 (c_get_string): Update.
784 (evaluate_subexp_c): Update.
785 * arch-utils.h (default_auto_charset, default_auto_wide_charset):
787 * python/python.c (gdbpy_target_charset): New function.
788 (gdbpy_target_wide_charset): Likewise.
789 (GdbMethods): Update.
792 2010-03-05 Ulrich Weigand <uweigand@de.ibm.com>
794 * symfile.c (build_section_addr_info_from_objfile): Do not mask
795 off high address bits.
797 2010-03-05 Ulrich Weigand <uweigand@de.ibm.com>
799 * python/py-lazy-string.c (gdbpy_extract_lazy_string): Extract
800 address as UnsignedLongLong, not LongLong.
802 2010-03-05 Kevin Buettner <kevinb@redhat.com>
803 Pedro Alves <pedro@codesourcery.com>
805 * remote-mips.c (gdbthread.h): Include.
806 (remote_mips_ptid): Declare.
807 (mips_error): Only mourn the inferior when inferior_ptid is non-null.
808 (common_open): Set inferior_ptid, add it as an inferior, and
809 as a thread too. Delete FIXME comment regarding start_remote().
810 (mips_close): Invoke generic_mourn_inferior().
811 (mips_kill): Make sure that target_mourn_inferior is invoked.
812 (mips_mourn_inferior): Don't invoke generic_mourn_inferior, as
813 it's now invoked from mips_close().
814 (mips_load): Don't null out inferior_ptid. Don't call
815 clear_symtab_users().
816 (mips_thread_alive, mips_pid_to_str): New functions.
817 (_initialize_remote_mips): Initialize remote_mips_ptid. Initialize
818 to_thread_alive and to_pid_to_str operations.
820 2010-03-04 Tom Tromey <tromey@redhat.com>
822 * dwarf2read.c (skip_one_die) <DW_FORM_ref_addr>: Use offset size
823 in DWARF 3 and later.
824 (read_attribute_value) <DW_FORM_ref_addr>: Likewise.
826 2010-03-04 Keith Seitz <keiths@redhat.com>
828 * linespec.c (decode_line_1): Update comments for is_quote_enclosed.
829 If the filename portion of the linespec was quoted, recheck the
830 remainder for additional quoting.
831 (locate_first_half): Skip over completer chars, too.
833 2010-03-04 Tom Tromey <tromey@redhat.com>
835 * printcmd.c (printf_command): Pass dummy argument to
838 2010-03-04 Doug Evans <dje@google.com>
840 * arm-tdep.c (arm_make_stub_cache): Delete unused locals reg,
843 * arm-tdep.c (arm_stub_unwind_sniffer): Add comment.
845 2010-03-04 Pedro Alves <pedro@codesourcery.com>
847 * breakpoint.c (update_watchpoint): Create a sentinel location if
848 the software watchpoint isn't watching any memory.
849 (breakpoint_address_bits): Skip dummy software watchpoint locations.
851 2010-03-04 Pedro Alves <pedro@codesourcery.com>
853 * utils.c (fputs_maybe_filtered): Check if there's already a top
854 level interpreter before dereferencing it. If there isn't one,
855 don't paginate either.
857 2010-03-04 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
859 * arm-tdep.c (arm_pc_is_thumb): Add heuristic that tries to get
860 the state right when single stepping.
861 (arm_get_next_pc_raw, thumb_get_next_pc_raw): New functions.
862 Get the next PC along with the instruction state.
863 (thumb_get_next_pc): Remove.
864 (arm_get_next_pc): Modified to use arm_get_next_pc_raw.
866 2010-03-04 Hui Zhu <teawater@gmail.com>
868 * i386-tdep.c (i386_process_record): Change "addr" to "tmpu64".
870 2010-03-03 Pedro Alves <pedro@codesourcery.com>
872 * utils.c (fputs_maybe_filtered): Always disable pagination if the
873 top level interpreter is MI.
875 2010-03-03 Stan Shebs <stan@codesourcery.com>
877 * remote.c (remote_download_tracepoint): Iterate over locations.
878 * tracepoint.c (validate_actionline): Ditto.
879 (encode_actions): Add location argument.
880 (trace_dump_command): Check all locations to see if stepping
883 2010-03-03 H.J. Lu <hongjiu.lu@intel.com>
884 Eli Zaretskii <eliz@gnu.org>
886 * NEWS: Add X86 general purpose registers section.
888 2010-03-03 Tom Tromey <tromey@redhat.com>
891 * varobj.c (install_new_value): Handle case where new print_value
894 2010-03-03 Dainis Jonitis <jonitis@gmail.com>
897 * printcmd.c (printf_command): Print end of format string using
900 2010-03-02 Tom Tromey <tromey@redhat.com>
902 * mi/mi-cmd-break.c (mi_read_next_line): Add missing 'void'.
903 * defs.h (read_command_lines_1): Add missing 'void'.
904 * cli/cli-script.c (recurse_read_control_structure): Add missing
906 (read_next_line): Likewise.
907 (read_command_lines_1): Likewise.
909 2010-03-02 Ulrich Weigand <uweigand@de.ibm.com>
911 * spu-tdep.c (spu_analyze_prologue): Track instruction to
912 store backchain as part of prologue.
914 2010-03-02 Daniel Jacobowitz <dan@codesourcery.com>
916 * progspace.c (update_address_spaces): Update inferior address spaces
919 2010-03-02 Doug Evans <dje@google.com>
921 * dwarf2read.c (add_partial_subprogram): Add missing baseaddr to
922 lowpc,highpc args to addrmap_set_empty.
924 2010-03-02 H.J. Lu <hongjiu.lu@intel.com>
926 * amd64-tdep.c (amd64_byte_names): New.
927 (amd64_word_names): Likewise.
928 (amd64_dword_names): Likewise.
929 (amd64_pseudo_register_name): Likewise.
930 (amd64_pseudo_register_read): Likewise.
931 (amd64_pseudo_register_write): Likewise.
932 (amd64_init_abi): Set num_byte_regs, num_word_regs, num_dword_regs
933 and num_mmx_regs. Call set_gdbarch_pseudo_register_read,
934 set_gdbarch_pseudo_register_write and
935 set_tdesc_pseudo_register_name. Don't call
936 set_gdbarch_num_pseudo_regs. Don't set mm0_regnum.
938 * i386-tdep.c (i386_num_mmx_regs): Removed.
939 (i386_num_pseudo_regs): Likewise.
940 (i386_byte_names): New.
941 (i386_word_names): Likewise.
942 (i386_byte_regnum_p): Likewise.
943 (i386_word_regnum_p): Likewise.
944 (i386_mmx_regnum_p): Updated.
945 (i386_pseudo_register_name): Make it global. Handle byte and
946 word pseudo-registers.
947 (i386_pseudo_register_read): Likewise.
948 (i386_pseudo_register_write): Likewise.
949 (i386_pseudo_register_type): Handle byte, word and dword
951 (i386_register_reggroup_p): Don't include pseudo
952 registers, except for MXX, in any register groups. Don't
953 include pseudo byte, word, dword registers in general_reggroup.
954 (i386_gdbarch_init): Set num_byte_regs, num_word_regs,
955 num_dword_regs, al_regnum, ax_regnum and eax_regnum. Put MMX
956 pseudo-registers after word pseudo-registers. Call
957 set_gdbarch_num_pseudo_regs after calling gdbarch_init_osabi.
959 * i386-tdep.h (gdbarch_tdep): Add num_mmx_regs, num_byte_regs,
960 al_regnum, num_word_regs, ax_regnum, num_dword_regs and
962 (i386_byte_regnum_p): New.
963 (i386_word_regnum_p): Likewise.
964 (i386_dword_regnum_p): Likewise.
965 (i386_pseudo_register_name): Likewise.
966 (i386_pseudo_register_read): Likewise.
967 (i386_pseudo_register_write): Likewise.
969 2010-03-01 H.J. Lu <hongjiu.lu@intel.com>
971 * target-descriptions.c (tdesc_type): Remove
972 TDESC_TYPE_I386_EFLAGS and TDESC_TYPE_I386_MXCSR.
973 (tdesc_predefined_types): Likewise.
974 (tdesc_gdb_type): Likewise. Pass NULL to append_flags_type_flag
975 if flag name is empty.
976 (maint_print_c_tdesc_cmd): Handle TDESC_TYPE_FLAGS.
978 * features/i386/32bit-core.xml: Define i386_eflags.
979 * features/i386/64bit-core.xml: Likewise.
981 * features/i386/32bit-sse.xml: Define i386_mxcsr.
982 * features/i386/64bit-sse.xml: Likewise.
984 * features/i386/amd64-linux.c: Regenerated.
985 * features/i386/amd64.c: Likewise.
986 * features/i386/i386-linux.c: Likewise.
987 * features/i386/i386.c: Likewise.
989 2010-03-01 Daniel Jacobowitz <dan@codesourcery.com>
991 * gdbtypes.c (append_composite_type_field_raw): New.
992 (append_composite_type_field_aligned): Use the new function.
993 * gdbtypes.h (append_composite_type_field_raw): Declare.
994 * target-descriptions.c (struct tdesc_type_field): Add start and end.
995 (struct tdesc_type_flag): New type.
996 (struct tdesc_type): Add TDESC_TYPE_STRUCT and TDESC_TYPE_FLAGS to
997 kind. Add size to u.u. Add u.f for flags.
998 (tdesc_gdb_type): Handle TDESC_TYPE_STRUCT and TDESC_TYPE_FLAGS.
999 (tdesc_free_type): Likewise.
1000 (tdesc_create_struct, tdesc_set_struct_size, tdesc_create_flags): New.
1001 (tdesc_add_field): Handle TDESC_TYPE_STRUCT.
1002 (tdesc_add_bitfield, tdesc_add_flag): New.
1003 * target-descriptions.h (tdesc_create_struct, tdesc_set_struct_size)
1004 (tdesc_create_flags, tdesc_add_bitfield, tdesc_add_flag): Declare.
1005 * xml-tdesc.c (struct tdesc_parsing_data): Rename current_union to
1006 current_type. Add current_type_size and current_type_is_flags.
1007 (tdesc_start_union): Clear the new fields.
1008 (tdesc_start_struct, tdesc_start_flags): New.
1009 (tdesc_start_field): Handle struct fields, including bitfields.
1010 (field_attributes): Make type optional. Add start and end.
1011 (union_children): Rename to struct_union_children.
1012 (union_attributes): Rename to struct_union_attributes. Add optional
1014 (flags_attributes): New.
1015 (feature_children): Add struct and flags.
1016 * features/gdb-target.dtd: Add flags and struct to features.
1017 Make field type optional. Add field start and end.
1019 2010-03-01 H.J. Lu <hongjiu.lu@intel.com>
1021 * amd64-linux-nat.c (AMD64_LINUX_USER64_CS): New.
1022 (amd64_linux_read_description): Likewise.
1023 (_initialize_amd64_linux_nat): Set to_read_description to
1024 amd64_linux_read_description.
1026 * amd64-linux-tdep.c: Include "features/i386/amd64-linux.c".
1027 (amd64_linux_register_name): Removed.
1028 (amd64_linux_register_type): Likewise.
1029 (amd64_linux_core_read_description): New.
1030 (amd64_linux_init_abi): Set target description to
1031 tdesc_amd64_linux if needed. Support orig_rax in target
1032 description. Don't call set_gdbarch_register_name nor
1033 set_gdbarch_register_type. Call
1034 set_gdbarch_core_read_description.
1035 (_initialize_amd64_linux_tdep): Call
1036 initialize_tdesc_amd64_linux.
1038 * amd64-linux-tdep.h (tdesc_amd64_linux): New.
1040 * amd64-tdep.c: Include "features/i386/amd64.c".
1041 (amd64_register_names): Removed.
1042 (amd64_register_name): Likewise.
1043 (amd64_register_type): Likewise.
1044 (amd64_init_abi): Set num_core_regs and register_names. Set
1045 target description to tdesc_amd64 if needed. Don't call
1046 set_gdbarch_register_name nor set_gdbarch_register_type.
1047 (_initialize_amd64_tdep): New.
1049 * i386-linux-nat.c (i386_linux_read_description): New.
1050 (_initialize_i386_linux_nat): Set to_read_description to
1051 i386_linux_read_description.
1053 * i386-linux-tdep.c: Include "features/i386/i386-linux.c".
1054 (i386_linux_register_name): Removed.
1055 (i386_linux_core_read_description): New.
1056 (i386_linux_read_description): Likewise.
1057 (i386_linux_init_abi): Don't call set_gdbarch_register_name.
1058 Set target description to tdesc_i386_linux if needed. Support
1059 orig_eax. Set register_reggroup_p. Call
1060 set_gdbarch_core_read_description.
1061 (_initialize_i386_linux_tdep): Call initialize_tdesc_i386_linux.
1063 * i386-linux-tdep.h (tdesc_i386_linux): New.
1065 * i386-nto-tdep.c (i386nto_regset_id): Replace I386_NUM_FREGS
1068 * i386-tdep.c: Include "features/i386/i386.c".
1069 (i386_register_names): Make it const.
1070 (i386_mmx_names): Likewise.
1071 (i386_num_register_names): Removed.
1072 (i386_register_name): Likewise.
1073 (i386_eflags_type): Likewise.
1074 (i386_mxcsr_type): Likewise.
1075 (i386_sse_type): Likewise.
1076 (i386_register_type): Likewise.
1077 (i387_ext_type): Call tdesc_find_type instead of arch_float_type.
1078 (i386_pseudo_register_name): New.
1079 (i386_pseudo_register_type): Likewise.
1080 (i386_mmx_type): Make it static.
1081 (i386_gdbarch_init): Check arch. Replace I386_NUM_FREGS with
1082 I387_NUM_REGS. Set num_core_regs and register_names. Don't
1083 call set_gdbarch_register_name nor set_gdbarch_register_type.
1084 Set register_reggroup_p. Set target description to tdesc_i386
1085 if needed. Call set_tdesc_pseudo_register_type,
1086 set_tdesc_pseudo_register_name and tdesc_use_registers.
1087 (_initialize_i386_tdep): Call initialize_tdesc_i386.
1088 initialize_tdesc_x86_64.
1090 * i386-tdep.h (gdbarch_tdep): Remove i386_eflags_type,
1091 i386_mxcsr_type and i386_sse_type. Add num_core_regs,
1092 register_names, tdesc and register_reggroup_p.
1093 (I386_NUM_FREGS): Removed.
1094 (i386_eflags_type): Likewise.
1095 (i386_mxcsr_type): Likewise.
1096 (i386_mmx_type): Likewise.
1097 (i386_sse_type): Likewise.
1098 (i386_register_name): Likewise.
1099 (i386_regnum): Add I386_MXCSR_REGNUM.
1100 (I386_SSE_NUM_REGS): Defined with I386_MXCSR_REGNUM.
1102 * i387-tdep.h (I387_NUM_REGS): New.
1104 * regformats/i386/i386-linux.dat: Generated.
1105 * regformats/i386/i386.dat: Likewise.
1106 * regformats/i386/amd64-linux.dat: Likewise.
1107 * regformats/i386/amd64.dat: Likewise.
1109 * regformats/reg-i386-linux.dat: Removed.
1110 * regformats/reg-i386.dat: Likewise.
1111 * regformats/reg-x86-64-linux.dat: Likewise.
1112 * regformats/reg-x86-64.dat: Likewise.
1114 2010-03-01 Corinna Vinschen <vinschen@redhat.com>
1116 * remote-fileio.c (remote_fileio_func_rename): Use Cygwin 1.7
1117 cygwin_conv_path API rather than the deprecated
1118 cygwin_conv_to_full_posix_path.
1120 (GetModuleFileNameExA): Undefine for Cygwin.
1121 (GetModuleFileNameExW): Define for Cygwin.
1122 (get_module_name): Change size of pathbuf to PATH_MAX for Cygwin.
1123 Call GetModuleFileNameExW and convert path to POSIX using
1125 (windows_make_so): Always define p. Drop unused variable m.
1126 Don't use Win32 functions to check file existance, rather use
1127 access on Cygwin. Fetch system directory using GetSystemDirectoryW.
1128 Use canonicalize_file_name to get full path.
1129 (get_image_name): Use wcstombs, rather than WideCharToMultiByte
1130 to convert Unicode pathname to multibyte on Cygwin. Otherwise,
1131 use correct target buffer size in call to WideCharToMultiByte.
1132 (handle_load_dll): Change size of dll_buf to PATH_MAX for Cygwin.
1133 (windows_pid_to_exec_file): Change size of path to PATH_MAX for Cygwin.
1134 (windows_create_inferior): Convert all paths and arguments to wchar_t
1135 and use CreateProcessW on Cygwin.
1136 (_initialize_windows_nat): Disable DOS-style path warning on Cygwin.
1137 (bad_GetModuleFileNameExA): Undefine for Cygwin.
1138 (bad_GetModuleFileNameExW): Define for Cygwin.
1139 (_initialize_loadable): Load GetModuleFileNameExW into
1140 dyn_GetModuleFileNameExW on Cygwin. Don't load ANSI function on Cygwin.
1142 2010-02-28 Phil Muldoon <pmuldoon@redhat.com>
1145 * python/py-frame.c (frapy_read_var): Add block argument and logic
1146 to cope with user provided blocks.
1148 2010-02-28 Jan Kratochvil <jan.kratochvil@redhat.com>
1150 * infcall.c (call_function_by_hand): Remove gdb_assert on sp and old_sp.
1153 2010-02-28 Corinna Vinschen <vinschen@redhat.com>
1155 * Makefile.in (SUBDIR_MI_OBS): Move mi-common.o from here...
1156 (COMMON_OBS): ... to here since it's used unconditionally.
1157 (SUBDIR_MI_SRCS): Move mi/mi-common.c from here...
1160 2010-02-26 David Daney <ddaney@caviumnetworks.com>
1162 * mips-linux-tdep.c: Update struct sigframe comments.
1163 (SIGFRAME_CODE_OFFSET): Delete macro.
1164 (mips_linux_o32_sigframe_init): Calculate sigcontext_base using
1166 (mips_linux_n32n64_sigframe_init): Same.
1168 2010-02-26 Kevin Buettner <kevinb@redhat.com>
1170 * remote-mips.c (mips_load): Don't use pseudo-register when
1171 invalidating regcache.
1173 2010-02-26 Daniel Jacobowitz <dan@codesourcery.com>
1175 * arm-tdep.c (thumb_get_next_pc): Correct conditional branch opcode.
1177 2010-02-26 Pedro Alves <pedro@codesourcery.com>
1179 * NEWS: Add "New targets" section, and mention ARM Symbian
1182 2010-02-26 Ulrich Weigand <uweigand@de.ibm.com>
1184 * dwarf2loc.c (struct piece_closure): Remove ARCH member,
1185 add ADDR_SIZE member.
1186 (allocate_piece_closure): Update.
1187 (copy_pieced_value_closure): Likewise.
1188 (dwarf2_evaluate_loc_desc): Likewise.
1189 (read_pieced_value): Use DWARF address size instead of
1190 GDB's gdbarch_addr_bit as size of values on the DWARF stack.
1192 2010-02-26 Phil Muldoon <pmuldoon@redhat.com>
1193 Tom Tromey <tromey@redhat.com>
1195 * python/py-type.c (typy_lookup_typename): Add in block argument.
1196 If provided restrict lookup to specified blocks.
1197 (gdbpy_lookup_type): Likewise.
1198 (typy_lookup_type): Likewise.
1200 2010-02-25 Daniel Jacobowitz <dan@codesourcery.com>
1205 * arm-symbian-tdep.c: New.
1206 * configure.tgt (arm*-*-symbianelf*): New target.
1207 (*-*-symbianelf*): New OS.
1208 * osabi.c (gdb_osabi_names): Add Symbian.
1209 * defs.h (gdb_osabi): Add GDB_OSABI_SYMBIAN.
1210 * Makefile.in (ALL_TARGET_OBJS): Add arm-symbian-tdep.o.
1211 (ALLDEPFILES): Add arm-symbian-tdep.c.
1213 2010-02-25 Daniel Jacobowitz <dan@codesourcery.com>
1215 * symfile.c (find_lowest_section): Include SEC_ALLOC sections.
1217 2010-02-24 Pedro Alves <pedro@codesourcery.com>
1219 * mi/mi-main.c (mi_cmd_execute): Fix typo.
1221 2010-02-24 Phil Muldoon <pmuldoon@redhat.com>
1222 Tom Tromey <tromey@redhat.com>
1223 Thiago Jung Bauermann <bauerman@br.ibm.com>
1225 * python/python.c (_initialize_python): Call
1226 gdbpy_initialize_symtabs, gdbpy_initialize_symbols and
1227 gdbpy_initialize_blocks.
1228 * python/python-internal.h: Declare struct symbol, block and
1229 symtab_and_line. Declare block_object_type and
1231 (gdbpy_lookup_symbol gdbpy_block_for_pc)
1232 (symtab_and_line_to_sal_object, symtab_to_symtab_object)
1233 (symbol_to_symbol_object, block_to_block_object)
1234 (gdbpy_initialize_symtabs,gdbpy_initialize_symbols)
1235 (gdbpy_initialize_blocks ): Declare.
1236 * python/py-frame.c (frapy_block, frapy_function, frapy_find_sal)
1237 (frapy_select): Add methods.
1238 (frapy_read_var): Add symbol branch.
1239 * Makefile.in (SUBDIR_PYTHON_OBS): Add py-symbol, py-symtab,
1241 (SUBDIR_PYTHON_SRCS): Likewise.
1242 (py-symbol.o): New rule.
1243 (py-symtab.o): Likewise.
1244 (py-block.o): Likewise.
1245 * python/py-symbol.c: New file.
1246 * python/py-symtab.c: Likewise.
1247 * python/py-block.c: Likewise.
1249 2010-02-24 Pedro Alves <pedro@codesourcery.com>
1253 * inferior.h (prepare_for_detach): Declare.
1254 (struct inferior) <detaching>: New field.
1255 * infrun.c (prepare_for_detach): New.
1256 (handle_inferior_event) <random signal>: Don't stop if detaching.
1257 * target.c (target_detach): Call prepare_for_detach.
1259 2010-02-24 Pedro Alves <pedro@codesourcery.com>
1261 Per-process displaced stepping queue.
1263 * infrun.c (displaced_step_ptid, displaced_step_request_queue)
1264 (displaced_step_gdbarch, displaced_step_closure,
1265 (displaced_step_original, displaced_step_copy): Move globals to
1267 (struct displaced_step_inferior_state): ... new structure.
1268 (displaced_step_inferior_states): New global.
1269 (get_displaced_stepping_state, add_displaced_stepping_state)
1270 (remove_displaced_stepping_state, infrun_inferior_exit): New
1272 (displaced_step_clear): Add displaced_step_inferior_state
1273 parameter, and adjust to handle it.
1274 (displaced_step_clear_cleanup): Parameter is now a
1275 displaced_step_inferior_state. Adjust.
1276 (displaced_step_prepare): Adjust.
1277 (displaced_step_fixup, displaced_step_fixup)
1278 (infrun_thread_ptid_changed, resume): Adjust.
1279 (init_wait_for_inferior): Don't call displaced_step_clear.
1280 (infrun_thread_stop_requested): Rewrite.
1281 (_initialize_infrun): Install infrun_inferior_exit as
1282 inferior_exit observer.
1284 2010-02-24 Pedro Alves <pedro@codesourcery.com>
1286 * inferior.h (ptid_match): Declare.
1287 * infrun.c (ptid_match): New.
1288 * remote.c (queued_stop_reply): Rewrite and use ptid_match.
1289 (handle_notification): Add debug output.
1290 * linux-nat.c (ptid_match): Delete.
1292 2010-02-24 David S. Miller <davem@davemloft.net>
1294 * gdb_ptrace.h (PT_SYSCALL): If PTRACE_SYSCALL is available, use it.
1295 * syscalls/sparc-linux.xml: New.
1296 * syscalls/sparc64-linux.xml: New.
1297 * Makefile.in (XML_SYSCALL_FILES): Add new syscall XML files.
1298 * sparc-linux-tdep.c (XML_SYSCALL_FILENAME_SPARC32): Define.
1299 (sparc32_linux_get_syscall_number): New function.
1300 (sparc32_linux_init_abi): Set syscall XML file name and hook up
1301 syscall number fetcher.
1302 * sparc64-linux-tdep.c (XML_SYSCALL_FILENAME_SPARC64): Define.
1303 (sparc64_linux_get_syscall_number): New function.
1304 (sparc64_linux_init_abi): Set syscall XML file name and hook up
1305 syscall number fetcher.
1307 2010-02-24 Vladimir Prus <vladimir@codesourcery.com>
1311 * breakpoint.c (clear_syscall_counts): Take struct inferior*.
1312 * inferior.c (add_inferior_silent): Notify inferior_added
1314 (delete_inferior_1): Notify inferior_removed observer.
1315 (exit_inferior_1): Pass inferior, not pid, to observer.
1316 (inferior_appeared): Likewise.
1317 (add_inferior_with_spaces): New.
1318 (add_inferior_command): Use the above.
1319 * inferior.h (delete_inferior_1, add_inferior_with_spaces):
1322 * inflow.c (inflow_inferior_exit): Likewise.
1323 * jit.c (jit_inferior_exit_hook): Likewise.
1325 * mi/mi-cmds.c (mi_cmds): Register add-inferior and
1327 * mi/mi-cmds.h (mi_cmd_add_inferior, mi_cmd_remove_inferior): New.
1328 * mi/mi-interp.c (mi_inferior_added, mi_inferior_removed): New.
1329 (report_initial_inferior): New.
1330 (mi_inferior_removed): Register the above. Make sure
1331 inferior_added observer is called on the first inferior.
1332 (mi_new_thread, mi_thread_exit): Thread group is now identified by
1333 inferior number, not pid.
1334 (mi_solib_loaded, mi_solib_unloaded): Report which inferiors are
1336 * mi/mi-main.c (current_context): New.
1337 (proceed_thread_callback): Use typed closure.
1338 Proceed everything if pid is 0. Most implementation split into
1339 (proceed_thread): ... this.
1340 (run_one_inferior): New.
1341 (mi_cmd_exec_continue, mi_cmd_exec_interrupt, mi_cmd_exec_run):
1342 Adjust for multiexec behaviour.
1343 (mi_cmd_add_inferior, mi_cmd_remove_inferior): New.
1344 (mi_cmd_execute): Handle the 'thread-group' option here.
1345 Do some extra checks.
1346 * mi-parse.c (mi_parse): Handle the --all and --thread-group
1348 * mi-parse.h (struct mi_parse): New fields all and thread_group.
1350 2010-02-24 Vladimir Prus <vladimir@codesourcery.com>
1352 Make -exec-run a proper MI commands.
1354 * mi/mi-cmds.h (mi_cmd_exec_run): Declare.
1355 * mi/mi-cmds.c (mi_cmds): Adjust.
1356 * mi/mi-main.c (mi_cmd_exec_run): New.
1358 2010-02-24 Pedro Alves <pedro@codesourcery.com>
1359 Stan Shebs <stan@codesourcery.com>
1361 * tracepoint.h (set_traceframe_number)
1362 (cleanup_restore_current_traceframe): Declare.
1363 * tracepoint.c (set_traceframe_number): New.
1364 (struct current_traceframe_cleanup): New.
1365 (do_restore_current_traceframe_cleanup)
1366 (restore_current_traceframe_cleanup_dtor)
1367 (make_cleanup_restore_current_traceframe): New.
1368 * infrun.c: Include tracepoint.h.
1369 (fetch_inferior_event): Switch out and in of tfind mode.
1371 2010-02-24 Pedro Alves <pedro@codesourcery.com>
1373 * breakpoint.c (breakpoint_init_inferior): Also delete
1374 bp_shlib_event breakpoints.
1375 * solib-frv.c (enable_break): Remove call to
1376 remove_solib_event_breakpoints.
1377 * solib-svr4.c (enable_break): Ditto.
1378 * solib-darwin.c (darwin_solib_create_inferior_hook): Ditto.
1379 * solib-pa64.c (pa64_solib_create_inferior_hook): Ditto.
1380 * solib-som.c (som_solib_create_inferior_hook): Ditto.
1381 * solib-spu.c (spu_enable_break): Ditto.
1383 2010-02-23 Harald Koenig <H.Koenig@science-computing.de>
1385 * c-exp.y (token_and_value): s/union YYSTYPE/YYSTYPE.
1387 2010-02-23 Harald Koenig <H.Koenig@science-computing.de>
1389 * varobj.c (varobj_update): Avoid non-constants in initializers.
1391 2010-02-23 Tom Tromey <tromey@redhat.com>
1393 * dwarf2loc.c (read_pieced_value) <DWARF_VALUE_STACK>: Correctly
1394 handle big-endian values.
1395 (dwarf2_evaluate_loc_desc) <DWARF_VALUE_STACK>: Likewise.
1397 2010-02-22 Pedro Alves <pedro@codesourcery.com>
1402 * breakpoint.c (insert_bp_location): If inserting the read
1403 watchpoint failed, fallback to an access watchpoint.
1404 (bpstat_check_watchpoint): Stop for read watchpoint triggers even
1405 if the value changed, if not watching the same memory for writes.
1406 (watchpoint_locations_match): Add comment.
1407 (update_global_location_list): Copy the location's watchpoint type.
1408 * i386-nat.c (i386_length_and_rw_bits): It's an internal error to
1409 handle read watchpoints here.
1410 (i386_insert_watchpoint): Read watchpoints aren't supported.
1411 * remote.c (remote_insert_watchpoint): Return 1 for unsupported
1413 * target.h (target_insert_watchpoint): Update description.
1415 2010-02-19 Tom Tromey <tromey@redhat.com>
1417 * p-typeprint.c (pascal_type_print_varspec_prefix): Update.
1418 * m2-typeprint.c (m2_print_type): Update.
1419 * gdbtypes.c (recursive_dump_type): Update.
1420 (copy_type_recursive): Update.
1421 * c-typeprint.c (c_type_print_varspec_prefix): Update.
1422 (c_type_print_base): Update.
1423 * gdbtypes.h (TYPE_CODE_TEMPLATE, TYPE_CODE_TEMPLATE_ARG):
1425 (struct cplus_struct_type) <ntemplate_args>: Remove.
1426 <struct template_arg>: Remove.
1427 <is_dynamic>: Move earlier.
1428 (TYPE_TEMPLATE_ARGS): Remove.
1429 (TYPE_NTEMPLATE_ARGS): Remove.
1430 (TYPE_TEMPLATE_ARG): Remove.
1432 2010-02-19 Tom Tromey <tromey@redhat.com>
1434 PR c++/8693, PR c++/9496:
1435 * cp-namespace.c (cp_lookup_nested_type): Handle TYPE_CODE_UNION.
1436 * c-exp.y (lex_one_token): Rename from yylex. Don't call
1437 write_dollar_variable. Don't try to classify NAME tokens.
1438 (token_and_value): New type.
1439 (token_fifo, popping, name_obstack): New globals.
1440 (classify_name): New function.
1441 (classify_inner_name): Likewise.
1443 (VARIABLE): Now has type sval.
1444 (exp : VARIABLE): Call write_dollar_variable.
1445 (qualified_name): Use TYPENAME, not typebase. Add production for
1446 multiple "::" instances.
1447 (variable): Use name_not_typename.
1448 (qualified_type): Remove.
1451 2010-02-19 Jan Kratochvil <jan.kratochvil@redhat.com>
1453 * symfile.c (addr_info_make_relative): Extend comment. Move SECT to
1454 a more inner block. Initialize ADDR by LOWER_OFFSET only if it was
1455 found by bfd_get_section_by_name.
1456 * symfile.h (struct section_addr_info) <sectindex>: New comment.
1458 2010-02-19 Joel Brobecker <brobecker@adacore.com>
1460 * NEWS: Add new "[...] since 7.1" section. Rename the "[...] since
1461 7.0 section" into "Changes in 7.1".
1463 2010-02-19 Joel Brobecker <brobecker@adacore.com>
1465 GDB 7.1 branch created (branch timestamp: 2010-02-18 20:00 UTC)
1466 * version.in: Bump version to 7.1.50.20100219-cvs.
1468 2010-02-18 Harald Koenig <H.Koenig@science-computing.de>
1470 * mi/mi-main.c (mi_cmd_exec_jump): Drop unneeded `return'.
1471 * symfile.c (symfile_map_offsets_to_segments): Fix assertion.
1473 2010-02-17 Tom Tromey <tromey@redhat.com>
1475 * NEWS: Add Python API Improvements section.
1477 2010-02-18 Daniel Jacobowitz <dan@codesourcery.com>
1479 * NEWS: Correct typo.
1481 2010-02-17 Tom Tromey <tromey@redhat.com>
1483 * objfiles.c (gdb_bfd_ref): Handle abfd==NULL.
1485 2010-02-17 Jan Kratochvil <jan.kratochvil@redhat.com>
1487 * symfile.c (build_section_addr_info_from_objfile): Include sections
1488 only if they are SEC_ALLOC or SEC_LOAD.
1490 2010-02-17 H.J. Lu <hongjiu.lu@intel.com>
1493 * solib-svr4.c (enable_break): Check size of CORE_ADDR instead
1494 of ULONGEST for address size.
1496 2010-02-17 Tom Tromey <tromey@redhat.com>
1498 * NEWS: Add C++ improvements section.
1500 2010-02-17 Ulrich Weigand <uweigand@de.ibm.com>
1502 * python/python-internal.h [!WITH_THREAD] (PyGILState_Release,
1503 PyThreadState_Swap): Avoid "statement with no effect" warning.
1505 2010-02-17 Jan Kratochvil <jan.kratochvil@redhat.com>
1507 * solib-svr4.c (enable_break <target_auxv_search>): New variable
1508 addr_bit. Adjust LOAD_ADDR sign for cross-arch inferiors.
1510 2010-02-17 Tristan Gingold <gingold@adacore.com>
1511 Petr HluzÃn <petr.hluzin@gmail.com>
1513 * avr-tdep.c (avr_scan_prologue): Convert an if statement to a
1514 gdb_assert. Fix info->size for SIG prologue.
1516 2010-02-16 Daniel Jacobowitz <dan@codesourcery.com>
1518 * infcmd.c (show_inferior_tty_command): Check for NULL.
1519 Correct output message.
1521 2010-02-16 Daniel Jacobowitz <dan@codesourcery.com>
1523 * linespec.c (decode_line_1): Handle FILE:FUNCTION even if
1524 FUNCTION contains parentheses. Improve removal of a trailing
1527 2010-02-16 Daniel Jacobowitz <dan@codesourcery.com>
1529 * gcore.c (do_bfd_delete_cleanup): New function.
1530 (gcore_command): Use it. Discard the cleanup after success.
1531 (gcore_copy_callback): Delete dead code.
1533 2010-02-16 Daniel Jacobowitz <dan@codesourcery.com>
1535 * symfile.c (addr_info_make_relative): Always use
1536 find_lowest_section.
1538 2010-02-16 Sami Wagiaalla <swagiaal@redhat.com>
1540 * NEWS: Added entry for namespace fixes.
1542 2010-02-15 Tom Tromey <tromey@redhat.com>
1544 * dwarf2read.c (guess_structure_name): Allocate name on the
1547 2010-02-15 Tom Tromey <tromey@redhat.com>
1549 * c-typeprint.c (c_type_print_base): Reverse order of test.
1551 2010-02-15 Jan Kratochvil <jan.kratochvil@redhat.com>
1553 * solib-svr4.c (LM_ADDR_CHECK): New variable minpagesize. Optionally
1554 initialize it from ELF BFD. Extend the prelink condition by it.
1556 2010-02-15 Jan Kratochvil <jan.kratochvil@redhat.com>
1558 * defs.h (parse_pid_to_attach): New.
1559 * utils.c (parse_pid_to_attach): New.
1560 * darwin-nat.c (darwin_attach): Replace ARGS parsing by parse_pid.
1561 * gnu-nat.c (gnu_attach): Likewise.
1562 * nto-procfs.c (procfs_attach): Likewise.
1563 * procfs.c (procfs_attach): Likewise.
1564 * windows-nat.c (windows_attach): Likewise.
1565 * inf-ptrace.c (inf_ptrace_attach): Likewise. Remove variable dummy.
1566 * inf-ttrace.c (inf_ttrace_attach): Likewise.
1567 * remote.c (extended_remote_attach_1): Likewise. New comment on getpid
1570 2010-02-14 Masaki Muranaka <monaka@monami-software.com>
1572 * MAINTAINERS: Add myself for write after approval privileges.
1574 2010-02-13 Jan Kratochvil <jan.kratochvil@redhat.com>
1576 * solib-svr4.c: (LM_ADDR_CHECK): Move variable align to a more inner
1579 2010-02-13 Jan Kratochvil <jan.kratochvil@redhat.com>
1581 * solib-svr4.c: (LM_ADDR_CHECK): Print successful prelink adjustment
1582 only if INFO_VERBOSE.
1584 2010-02-12 Tomas Holmberg <th@virtutech.com>
1586 * mi/mi-main.c: Added the --reverse flag to the following MI
1587 commands: exec-continue, exec-finish, exec-next, exec-step,
1588 exec-next-instruction, exec-step-instruction. This is to
1589 support reverse execution over the MI interface to gdb.
1591 2010-02-12 Pedro Alves <pedro@codesourcery.com>
1593 * tracepoint.c (_initialize_tracepoint): Specify that the address
1594 range of `tfind outsize' is exclusive, and that the address range
1595 of `tfind range' is inclusive, in the commands' help strings.
1597 2010-02-12 Joel Brobecker <brobecker@adacore.com>
1599 Spurious "dll not found" error messages on x64-windows.
1600 * windows-nat.c: Add include of complaints.h.
1601 (handle_unload_dll): Change dll-not-found error into a complaint.
1603 2010-02-12 Pedro Alves <pedro@codesourcery.com>
1605 * breakpoint.c (allocate_bp_location): Use bp_loc_other for
1606 bp_tracepoint and bp_fast_tracepoint, not
1607 bp_loc_software_breakpoint.
1608 (update_global_location_list): Tracepoints are never duplicates of
1611 2010-02-12 Pedro Alves <pedro@codesourcery.com>
1613 * breakpoint.c (break_command_really): Change return type to int.
1614 Return false if no breakpoint was created, true otherwise.
1615 (trace_command): Don't set the tracepoint count if no tracepoint
1617 (ftrace_command): Ditto.
1618 (create_tracepoint_from_upload): Bail out if the tracepoint wasn't
1619 created in the breakpoints table.
1621 2010-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
1622 Ulrich Weigand <uweigand@de.ibm.com>
1624 * solib-svr4.c (LM_ADDR_CHECK): New comment on PPC-aware condition.
1626 2010-02-11 Pedro Alves <pedro@codesourcery.com>
1628 * ax-gdb.c (gen_exp_binop_rest) [BINOP_SUBSCRIPT]: Error out if
1629 the offset value isn't of integral type.
1631 2010-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
1633 * breakpoint.c (delete_breakpoint) <bpt->related_breakpoint != NULL>:
1636 2010-02-11 Pedro Alves <pedro@codesourcery.com>
1638 * ax-gdb.c (gen_exp_binop_rest) [BINOP_SUBSCRIPT]: Error out on
1639 non-subscriptable types.
1640 * valarith.c (binop_types_user_defined_p): New, abstracted out
1642 (binop_user_defined_p): ... this.
1643 * value.h (binop_types_user_defined_p): Declare.
1645 2010-02-11 Pedro Alves <pedro@codesourcery.com>
1647 * tracepoint.c (tfile_open): Remove spurious discard_cleanups.
1648 Merge uploaded TSVs before merging uploaded tracepoints.
1650 2010-02-11 Pedro Alves <pedro@codesourcery.com>
1652 * ax-gdb.c (gen_deref): Don't allow dereferencing void pointers.
1654 2010-02-11 Vladimir Prus <vladimir@codesourcery.com>
1656 * mi/mi-cmd-stack.c (mi_cmd_stack_list_locals): Add extra
1657 whitespace character after a dot in comment.
1658 (mi_cmd_stack_list_arguments, mi_cmd_stack_list_variables):
1660 (list_args_or_locals): For the 'all' (that is
1661 -stack-list-variables) case, always output list of tuples.
1662 Output 'arg' field if variable is argument.
1664 2010-02-10 Tom Tromey <tromey@redhat.com>
1666 * parser-defs.h (parser_debug): Declare.
1667 * parse.c (_initialize_parse): Install "debug parser" set/show
1669 (parser_debug): New global.
1670 (show_parserdebug): New function.
1671 * c-exp.y (c_parse): Set yydebug.
1673 2010-02-10 H.J. Lu <hongjiu.lu@intel.com>
1675 * target-descriptions.c (tdesc_type): Add TDESC_TYPE_I387_EXT,
1676 TDESC_TYPE_I386_EFLAGS and TDESC_TYPE_I386_MXCSR.
1677 (tdesc_predefined_types): Add i387_ext, i386_eflags and
1679 (tdesc_find_type): New.
1680 (tdesc_gdb_type): Use tdesc_find_type. Handle TDESC_TYPE_I387_EXT,
1681 TDESC_TYPE_I386_EFLAGS and TDESC_TYPE_I386_MXCSR.
1683 * target-descriptions.h (tdesc_find_type): New.
1685 2010-02-10 Michael Snyder <msnyder@vmware.com>
1687 * gdb-gdb.py: Comment fix.
1689 2010-02-09 Tristan Gingold <gingold@adacore.com>
1691 * machoread.c (macho_symfile_relocate): New function.
1692 (macho_sym_fns): Use macho_symfile_relocate instead of
1693 default_symfile_relocate.
1694 (macho_oso_data): New type.
1695 (current_oso): New variable.
1696 (macho_add_oso_symfile): Do not compute section_addr_info, but
1697 instead set vma of sections.
1698 Do not set SYMFILE_VERBOSE to call symbol_file_add_from_bfd.
1699 Set and clear current_oso.
1701 2010-02-09 Joel Brobecker <brobecker@adacore.com>
1703 Wrong type description for tagged type parameter.
1704 * ada-lang.c (ada_evaluate_subexp) [OP_VAR_VALUE]: When noside is
1705 EVAL_AVOID_SIDE_EFFECTS, also handle the case when type is a
1706 reference to a tagged type.
1708 2010-02-09 Tristan Gingold <gingold@adacore.com>
1710 * objfiles.c (objfile_separate_debug_iterate): Do not iterate on
1711 brothers of the parent.
1713 2010-02-08 Tom Tromey <tromey@redhat.com>
1717 * valops.c (search_struct_field): Make 'name' const.
1718 (search_struct_method): Likewise.
1719 (find_method_list): Make 'method' const.
1720 (value_struct_elt): Make 'name' and 'err' const.
1721 (value_find_oload_method_list): Make 'method' const.
1722 (find_overload_match): Make 'name' const.
1723 * eval.c (evaluate_subexp_standard): New locals function,
1725 <OP_FUNCALL>: Handle OP_SCOPE specially.
1727 2010-02-08 Ulrich Weigand <uweigand@de.ibm.com>
1729 * infrun.c (handle_inferior_event): Do not look up regcache
1730 for exited processes.
1732 Mon Feb 8 13:17:10 2010 Chris Moller <moller@mollerware.com>
1735 * valarith.c (value_ptrdiff): Added a test for a zero type length,
1736 warn if found, and assume length = 1.
1738 2010-02-08 Chris Moller <cmoller@redhat.com>
1741 * cp-valprint.c (cp_print_value_fields) Fix use of obstacks.
1742 cp_print_static_field) Fix use of obstacks.
1744 2010-02-08 Pedro Alves <pedro@codesourcery.com>
1746 * linux-nat.c (linux_nat_resume): In non-stop, also only tag
1747 resumed LWPs as resumed.
1748 (linux_nat_wait_1): If there's no resumed LWP in the set of LWPs
1749 we're waiting for, bail out with TARGET_WAITKIND_IGNORE, instead
1750 of throwing an internal error. If an LWP of a process we're not
1751 waiting for reports a signal, don't force collecting a SIGSTOP,
1752 and if it was breakpoint hit in non-stop mode, cancel it. Don't
1753 go through all LWPs cancelling breakpoints in non-stop mode.
1754 (resume_stopped_resumed_lwps): New.
1755 (linux_nat_wait): Use it.
1757 2010-02-07 H.J. Lu <hongjiu.lu@intel.com>
1759 * features/Makefile (WHICH): Add i386/i386, i386/i386-linux,
1760 i386/amd64 and i386/amd64-linux.
1761 (i386/i386-expedite): New.
1762 (i386/i386-linux-expedite): Likewise.
1763 (i386/amd64-expedite):Likewise.
1764 (i386/amd64-linux-expedite): Likewise.
1765 ($(outdir)/i386/i386-linux.dat): Likewise.
1766 ($(outdir)/i386/amd64.dat): Likewise.
1767 ($(outdir)/i386/amd64-linux.dat): Likewise.
1769 * features/i386/32bit-core.xml: New.
1770 * features/i386/32bit-linux.xml: Likewise.
1771 * features/i386/32bit-sse.xml: Likewise.
1772 * features/i386/64bit-core.xml: Likewise.
1773 * features/i386/64bit-linux.xml: Likewise.
1774 * features/i386/64bit-sse.xml: Likewise.
1775 * features/i386/i386-linux.xml: Likewise.
1776 * features/i386/i386.xml: Likewise.
1777 * features/i386/amd64-linux.xml: Likewise.
1778 * features/i386/amd64.xml: Likewise.
1779 * features/i386/i386-linux.c: Likewise.
1780 * features/i386/i386.c: Likewise.
1781 * features/i386/amd64-linux.c: Likewise.
1782 * features/i386/amd64.c: Likewise.
1784 2010-02-05 Sami Wagiaalla <swagiaal@redhat.com>
1787 * cp-support.h: Added char* alias element to using_direct data
1789 (cp_add_using): Added char* alias argument.
1790 (cp_add_using_directive): Ditto.
1791 * cp-namespace.c: Updated with the above changes.
1792 (cp_lookup_symbol_imports): Check for aliases.
1793 * dwarf2read.c (read_import_statement): Figure out local alias
1794 for the import and pass it on to cp_add_using.
1795 (read_namespace): Pass alias argument to cp_add_using.
1797 2010-02-05 Hui Zhu <teawater@gmail.com>
1799 * defs.h (gdb_bfd_errmsg): New extern.
1800 * exec.c (exec_file_attach): Change bfd_errmsg to
1802 * utils.c (AMBIGUOUS_MESS1): New macro.
1803 (AMBIGUOUS_MESS2): New macro.
1804 (gdb_bfd_errmsg): New function.
1806 2010-02-04 Doug Evans <dje@google.com>
1808 * solib-svr4.c (enable_break): Add comment.
1810 2010-02-04 Anthony Green <green@moxielogic.com>
1812 * moxie-tdep.c (moxie_analyze_prologue): Fail protocol analysis
1815 2010-02-04 Tom Tromey <tromey@redhat.com>
1817 * valops.c (search_struct_field): Account for
1818 value_embedded_offset. Fix check for virtual base past the end of
1819 the object. Use value_copy when making a slice of the value.
1821 2010-02-04 H.J. Lu <hongjiu.lu@intel.com>
1824 * tui/tui-interp.c (tui_init): Call tui_initialize_readline
1825 only if gdb_stdout is a tty.
1827 2010-02-04 H.J. Lu <hongjiu.lu@intel.com>
1829 * target-descriptions.c: Include "osabi.h".
1830 (maint_print_c_tdesc_cmd): Generate set_tdesc_osabi for valid
1833 2010-02-04 Tristan Gingold <gingold@adacore.com>
1835 * machoread.c (macho_add_oso): Renamed to macho_register_oso.
1836 (macho_symtab_read): Adjust calls to macho_add_oso.
1837 (macho_oso_symfile): Renamed to macho_symfile_read_all_oso.
1838 (macho_symfile_read): Adjust call to macho_oso_symfile.
1839 (macho_new_init): Move this function after declarations.
1840 (macho_symfile_init): Ditto.
1841 * darwin-nat-info.c (darwin_lib_gdb_ports): Remove.
1842 * darwin-nat.c (darwin_lookup_task): Remove unused prototype.
1844 2010-02-04 Vladimir Prus <vladimir@codesourcery.com>
1846 Include MI command in remotelog.
1848 * mi/mi-main.c (mi_execute_command): Call target_log_command.
1850 2010-02-03 H.J. Lu <hongjiu.lu@intel.com>
1852 * remote.c (remote_state): Remove gdbarch.
1853 (init_remote_state): Don't set gdbarch.
1854 (remote_query_supported): Pass target_gdbarch instead of
1855 rs->gdbarch to gdbarch_qsupported.
1857 2010-02-03 H.J. Lu <hongjiu.lu@intel.com>
1859 * gdbarch.sh: Add qsupported.
1861 * gdbarch.c: Regenerated.
1862 * gdbarch.h: Likewise.
1864 * remote.c (remote_state): Add gdbarch.
1865 (init_remote_state): Set gdbarch.
1866 (remote_query_supported): Support gdbarch_qsupported.
1868 2010-02-03 Daniel Jacobowitz <dan@codesourcery.com>
1870 * amd64fbsd-nat.c (amd64fbsd_supply_pcb): Also check for
1871 __FreeBSD_kernel_version.
1873 2010-02-03 Tristan Gingold <gingold@adacore.com>
1875 * symfile.h (struct sym_fns): Add sym_relocate field.
1876 (default_symfile_relocate): New prototype.
1877 (symfile_relocate_debug_section): First argument is now an objfile.
1878 * symfile.c (default_symfile_relocate): Rename from
1879 symfile_relocate_debug_section, first argument is now an objfile.
1880 (symfile_relocate_debug_section): New function.
1881 * coffread.c (coff_sym_fns): Set sym_relocate field.
1882 * somread.c (som_sym_fns): Ditto.
1883 * mipsread.c (ecoff_sym_fns): Ditto.
1884 * machoread.c (macho_sym_fns): Ditto.
1885 * elfread.c (elf_sym_fns): Ditto.
1886 * dwarf2read.c (dwarf2_read_section): Ditto.
1887 * xcoffread.c (xcoff_sym_fns): Ditto.
1888 * dbxread.c (aout_sym_fns): Ditto.
1889 (dbx_psymtab_to_symtab): Adjust call to symfile_relocate_debug_section.
1890 (elfstab_build_psymtabs): Ditto.
1892 2010-02-03 H.J. Lu <hongjiu.lu@intel.com>
1894 * defs.h (MAX_REGISTER_SIZE): Increase to 32.
1896 2010-02-02 Tom Tromey <tromey@redhat.com>
1898 * valops.c (value_cast_structs): Try downcasting using the RTTI
1901 2010-02-02 Tom Tromey <tromey@redhat.com>
1903 * gnu-v2-abi.c: Don't include gnu-v2-abi.h.
1904 (gnuv2_baseclass_offset): Now static.
1905 * Makefile.in (HFILES_NO_SRCDIR): Remove gnu-v2-abi.h.
1906 * gnu-v2-abi.h: Remove.
1908 2010-02-02 Tom Tromey <tromey@redhat.com>
1910 * m2-typeprint.c (m2_record_fields): Don't use
1912 * gdbtypes.h (TYPE_DECLARED_CLASS): New macro.
1913 (struct main_type) <flag_declared_class>: New field.
1914 (struct cplus_struct_type) <declared_type>: Remove.
1915 <ntemplate_args>: Move earlier.
1916 (DECLARED_TYPE_CLASS, DECLARED_TYPE_UNION, DECLARED_TYPE_STRUCT)
1917 (DECLARED_TYPE_TEMPLATE): Remove.
1918 (TYPE_DECLARED_TYPE): Remove.
1919 * gdbtypes.c (lookup_union): Don't use TYPE_DECLARED_TYPE.
1920 * dwarf2read.c (read_structure_type): Set TYPE_DECLARED_CLASS.
1921 * c-typeprint.c (c_type_print_base): Use TYPE_DECLARED_CLASS, not
1924 2010-02-02 Tom Tromey <tromey@redhat.com>
1926 PR c++/11226, PR c++/9629, PR c++/9688, PR c++/8890:
1927 * valops.c (search_struct_field): Compute nbases after calling
1929 (check_field): Call CHECK_TYPEDEF.
1930 * cp-valprint.c (cp_print_value): Pass correct address to
1931 baseclass_offset. Fix check for virtual base past the end of the
1932 object. Don't offset address passed to cp_print_value_fields or
1933 apply_val_pretty_printer.
1934 (cp_print_value_fields): Fix call to val_print.
1935 (cp_print_value_fields_rtti): New function.
1936 * c-valprint.c (c_val_print): Use cp_print_value_fields_rtti.
1937 * p-valprint.c (pascal_object_print_value_fields): Fix call to
1939 * python/py-prettyprint.c (apply_val_pretty_printer): Add embedded
1941 * language.h (struct language_defn) <la_val_print>: Document.
1942 * c-lang.h (cp_print_value_fields_rtti): Declare.
1944 2010-02-01 Jan Kratochvil <jan.kratochvil@redhat.com>
1947 * linux-low.c (linux_tracefork_child) [!(__UCLIBC__ && HAS_NOMMU)]: New.
1948 (linux_test_for_tracefork): Move `stack' into [__UCLIBC__ && HAS_NOMMU].
1949 (linux_test_for_tracefork) [!(__UCLIBC__ && HAS_NOMMU)]: New.
1951 2010-02-01 Michael Matz <matz@suse.de>
1952 Daniel Jacobowitz <dan@codesourcery.com>
1954 * i386-tdep.c (i386_frame_cache): Assume valid anonymous
1955 functions use a frame pointer.
1957 2010-02-01 Jan Kratochvil <jan.kratochvil@redhat.com>
1959 * solib-svr4.c (scan_dyntag): New variable dyn_addr. Replace gdb_assert
1960 by a conditional setting DYN_ADDR. Use DYN_ADDR.
1961 * config/djgpp/fnchange.lst: Add translations for
1962 symbol-without-target_section.exp and symbol-without-target_section.c.
1964 2010-02-01 Daniel Jacobowitz <dan@codesourcery.com>
1966 * gdbarch.sh: Set LANG and LC_ALL to C, not c.
1967 (remote_breakpoint_for_pc): Correct invalid_p check.
1968 * gdbarch.c: Regenerated.
1970 2010-02-01 Daniel Jacobowitz <dan@codesourcery.com>
1972 * arm-tdep.c (arm_find_mapping_symbol): New function, from
1974 (arm_pc_is_thumb): Use arm_find_mapping_symbol.
1975 (extend_buffer_earlier): New function.
1976 (MAX_IT_BLOCK_PREFIX, IT_SCAN_THRESHOLD): New constants.
1977 (arm_adjust_breakpoint_address): New function.
1978 (arm_gdbarch_init): Register arm_adjust_breakpoint_address.
1980 2010-02-01 Daniel Jacobowitz <dan@codesourcery.com>
1982 * arm-linux-tdep.c (arm_linux_thumb2_be_breakpoint)
1983 (arm_linux_thumb2_le_breakpoint): New constants.
1984 (arm_linux_init_abi): Set thumb2_breakpoint and
1985 thumb2_breakpoint_size.
1986 * arm-tdep.c (thumb_insn_size, thumb_advance_itstate): New functions.
1987 (thumb_get_next_pc): Add a comment. Rename IT to ITSTATE.
1988 Implement support for single stepping through IT blocks if
1989 a 32-bit Thumb breakpoint instruction is available.
1990 (arm_breakpoint_from_pc): If a 32-bit Thumb breakpoint instruction
1991 is available, use it when needed.
1992 (arm_remote_breakpoint_from_pc): New function.
1993 (arm_gdbarch_init): Register arm_remote_breakpoint_from_pc.
1994 * arm-tdep.h (struct gdbarch_tdep): Correct thumb_breakpoint
1995 comment. Add thumb2_breakpoint and thumb2_breakpoint_size.
1997 2010-02-01 Daniel Jacobowitz <dan@codesourcery.com>
1999 * arch-utils.c (default_remote_breakpoint_from_pc): New function.
2000 * arch-utils.h (default_remote_breakpoint_from_pc): Declare.
2001 * gdbarch.c, gdbarch.h: Regenerated.
2002 * gdbarch.sh (remote_breakpoint_from_pc): New architecture method.
2003 * remote.c (remote_insert_breakpoint, remote_insert_hw_breakpoint): Use
2004 gdbarch_remote_breakpoint_from_pc.
2006 2010-01-29 Daniel Jacobowitz <dan@codesourcery.com>
2008 * infrun.c (prepare_to_proceed): Handle other signals which might
2010 (handle_inferior_event): Move the check for unusual breakpoint
2013 2010-01-29 Paul Hilfinger <hilfinger@adacore.com>
2015 amd64 - function returning record with field straddling 2 registers.
2016 * amd64-tdep.c (amd_classify_aggregate): Handle the case of
2017 a record of length <= 16 in which a field straddles the two
2020 2010-01-29 Joel Brobecker <brobecker@adacore.com>
2022 Implement return values on amd64-windows.
2023 * amd64-windows-tdep.c: #include gdbcore.h and regcache.h.
2024 (amd64_windows_return_value): New function.
2025 (amd64_windows_init_abi): Call set_gdbarch_return_value with
2026 amd64_windows_return_value.
2028 2010-01-29 Joel Brobecker <brobecker@adacore.com>
2030 amd64-windows: 32 bytes allocated on stack by caller for integer
2031 parameter registers.
2032 * i386-tdep.h (struct gdbarch_tdep): Add new field
2033 integer_param_regs_saved_in_caller_frame.
2034 * amd64-windows-tdep.c (amd64_windows_init_abi): Set
2035 tdep->integer_param_regs_saved_in_caller_frame to 1.
2036 * amd64-tdep.c (amd64_push_dummy_call): Allocate some memory on
2037 stack if tdep->integer_param_regs_saved_in_caller_frame is set.
2039 2010-01-29 Joel Brobecker <brobecker@adacore.com>
2041 amd64-windows: memory args passed by pointer during function calls.
2042 * i386-tdep.h (gdbarch_tdep): Add field memory_args_by_pointer.
2043 * amd64-tdep.c (amd64_push_arguments): Add handling of architectures
2044 where tdep->memory_args_by_pointer is non-zero.
2045 * amd64-windows-tdep.c (amd64_windows_init_abi): Set
2046 tdep->memory_args_by_pointer to 1.
2048 2010-01-29 Joel Brobecker <brobecker@adacore.com>
2050 amd64-windows: Integer parameters in function calls.
2051 * i386-tdep.h (enum amd64_reg_class): New, moved here from
2053 (struct gdbarch_tdep): Add fields call_dummy_num_integer_regs,
2054 call_dummy_integer_regs, and classify.
2055 * amd64-tdep.h (amd64_classify): Add declaration.
2056 * amd64-tdep.c (amd64_dummy_call_integer_regs): New static constant.
2057 (amd64_reg_class): Delete, moved to i386-tdep.h.
2058 (amd64_classify): Make non-static. Move declaration to amd64-tdep.h.
2059 Replace call to amd64_classify by call to tdep->classify.
2060 (amd64_push_arguments): Get the list of registers to use for
2061 passing integer parameters from the gdbarch tdep structure,
2062 rather than using a hardcoded one. Replace calls to amd64_classify
2063 by calls to tdep->classify.
2064 (amd64_push_dummy_call): Get the register number used for
2065 the "hidden" argument from tdep->call_dummy_integer_regs.
2066 (amd64_init_abi): Initialize tdep->call_dummy_num_integer_regs
2067 and tdep->call_dummy_integer_regs. Set tdep->classify.
2068 * amd64-windows-tdep.c: Add include of gdbtypes.h.
2069 (amd64_windows_dummy_call_integer_regs): New static global.
2070 (amd64_windows_classify): New function.
2071 (amd64_windows_init_abi): Initialize tdep->call_dummy_num_integer_regs
2072 tdep->call_dummy_integer_regs and tdep->classify.
2074 2010-01-28 Daniel Jacobowitz <dan@codesourcery.com>
2076 * regcache.c (regcache_xmalloc): Add aspace argument. Use it
2077 for the new regcache. All callers updated.
2078 (regcache_cpy, regcache_cpy_no_passthrough): Do not set aspace here.
2079 (get_thread_arch_regcache): Do not set aspace here.
2080 * regcache.h (regcache_xmalloc): Update declaration.
2082 * frame.c, infcall.c, ppc-linux-tdep.c: Calls to
2083 regcache_xmalloc updated.
2085 2010-01-28 Joel Brobecker <brobecker@adacore.com>
2087 Another -Wunused-function error in procfs.c (sparc-solaris)
2088 * procfs.c (insert_dbx_link_breakpoint): Delete declaration. Move up.
2089 Only define if SYS_syssgi is defined.
2090 (remove_dbx_link_breakpoint): Delete declaration. Move up.
2091 (dbx_link_addr, insert_dbx_link_bpt_in_file)
2092 (insert_dbx_link_bpt_in_region): Move up. Only define if SYS_syssgi
2095 2010-01-27 Christopher Faylor <me+cygwin@cgf.cx>
2097 * windows-nat.c (windows_initialization_done): New variable.
2098 (get_windows_debug_event): Issue error when process dies before
2099 completely initializing.
2100 (do_initial_windows_stuff): Set flag to indicate when we are done with
2101 the initial steps of attaching to the child.
2103 2010-01-27 Jan Kratochvil <jan.kratochvil@redhat.com>
2105 * symtab.h (struct symbol <symtab>): New comment on NULL values.
2107 2010-01-27 Doug Evans <dje@google.com>
2109 * solib-svr4.c (solib_break_names): Add __dl_rtld_db_dlactivity.
2111 * breakpoint.c (bpstat_stop_status): Delete useless code.
2113 2010-01-27 Jan Kratochvil <jan.kratochvil@redhat.com>
2115 * printcmd.c (display_uses_solib_p): Remove variable section. Access
2116 objfile via SYMBOL_SYMTAB.
2118 2010-01-26 Tom Tromey <tromey@redhat.com>
2121 * eval.c (evaluate_subexp_for_address) <UNOP_IND>: Call
2122 coerce_array on result.
2124 2010-01-26 Sami Wagiaalla <swagiaal@redhat.com>
2126 * cp-namespace.c (cp_lookup_symbol_namespace): Added
2127 search_parent argument.
2128 (cp_add_using): Initialize 'searched' field.
2129 (reset_directive_searched): New function.
2130 * cp-support.h: Add 'searched' field to using_direct struct.
2131 (cp_lookup_symbol_imports): Ditto.
2132 * cp-namespace.c (cp_lookup_symbol_imports): Ditto.
2133 Perform recursive search.
2134 Implement non parent search.
2135 * valops.c (value_maybe_namespace_elt): Updated.
2137 2010-01-26 Sami Wagiaalla <swagiaal@redhat.com>
2140 * dwarf2read.c (read_lexical_block_scope): Create blocks for
2141 scopes which contain using directives even if they contain no
2143 * symtab.c (lookup_symbol_aux): Pass lowest level block to
2144 la_lookup_symbol_nonlocal.
2145 * cp-namespace.c (cp_lookup_symbol_nonlocal): call
2146 cp_lookup_symbol_namespace.
2147 (cp_lookup_symbol_namespace): Perform an import lookup at every
2149 (cp_lookup_symbol_imports): New function.
2150 (cp_lookup_symbol_in_namespace): New function.
2152 2010-01-25 Tom Tromey <tromey@redhat.com>
2155 * c-valprint.c (c_val_print): Fix test of extract_unsigned_integer
2158 2010-01-25 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
2160 * configure.ac: Only use host_os part when disabling TUI on osf.
2161 Use test to check variables, prefix strings with x.
2162 * configure: Regenerate.
2164 * solib-osf.c (osf_current_sos): Initialize tail.
2166 2010-01-25 gingold <gingold@adacore.com>
2168 * windows-nat.c (windows_continue): Use %x to print thread id.
2169 (get_windows_debug_event): Ditto.
2171 2010-01-22 Tom Tromey <tromey@redhat.com>
2174 * dwarf2read.c (quirk_gcc_member_function_pointer): Change return
2175 type and arguments. Use smash_to_methodptr_type.
2176 (read_structure_type): Call quirk_gcc_member_function_pointer
2178 * gdbtypes.h (smash_to_methodptr_type): Declare.
2179 * gdbtypes.c (smash_to_methodptr_type): New function.
2180 (lookup_methodptr_type): Use it.
2182 2010-01-21 Tom Tromey <tromey@redhat.com>
2185 * symtab.h (lookup_minimal_symbol_and_objfile): Declare.
2186 * minsyms.c (lookup_minimal_symbol_and_objfile): New function.
2187 * glibc-tdep.c (find_minsym_and_objfile): Remove.
2188 (glibc_skip_solib_resolver): Use
2189 lookup_minimal_symbol_and_objfile.
2191 2010-01-21 Kai Tietz <kai.tietz@onevision.com>
2193 * inflow.c (check_syscall): Guard by #if clause for GO32 and
2196 2010-01-20 Tom Tromey <tromey@redhat.com>
2199 * valarith.c (value_binop): Handle BINOP_GTR, BINOP_LEQ, and
2200 BINOP_GEQ. Handle BINOP_NOTEQUAL in the signed case.
2201 * dwarf2expr.c (new_dwarf_expr_context): Allocate
2202 dwarf_stack_values, not CORE_ADDRs.
2203 (execute_stack_op): Change DW_OP_div and comparison operators to
2204 use signed operands.
2206 2010-01-20 Vladimir Prus <vladimir@codesourcery.com>
2208 Per-inferior args and tty and environment.
2210 * infcmd.c (inferior_args): Rename to ...
2211 (inferior_args_scratch): ... this.
2212 (inferior_io_terminal): Rename to ...
2213 (inferior_io_terminal_scratch): ... this.
2214 (inferior_argc, inferior_argv): Remove.
2215 (set_inferior_io_terminal, get_inferior_io_terminal): Store
2216 inside current_inferior().
2217 (set_inferior_tty_command, show_inferior_tty_command): New.
2218 (get_inferior_args, set_inferior_args): Store inside
2220 (notice_args_set): Likewise and rename to...
2221 (set_args_command): ... this.
2222 (set_inferior_args_vector): Likewise.
2223 (notice_args_read): Rename to...
2224 (show_args_command): ...new.
2225 (tty_command): Remove.
2226 (run_command_1): Don't free old args, as they are freed by
2227 set_inferior_arg now.
2228 (run_no_args_command): Likewise.
2229 (inferior_environ): Remove.
2230 (run_command_1): Use environment of the current inferior.
2231 (environment_info, set_environment_command)
2232 (unset_environment_command, path_info, path_command): Likewise.
2233 (_initialize_infcmd): Adjust for function and variable renames.
2234 Do not init inferior_environ.
2235 * inferior.h (set_inferior_arg): Adjust prototype.
2236 (struct inferior): New fields args, argc, argv, terminal, environment.
2237 (inferior_environ): Remove declaration.
2238 * inferior.c (free_inferior): Free new fields.
2239 (add_inferior_silent): Initialize 'environment' field.
2240 * main.c (captured_main): Set arguments only after the initial
2241 inferior has been created. Set set_inferior_io_terminal,
2243 * mi/mi-main.c (mi_cmd_env_path): Use environment of the current
2245 (_initialize_mi_cmd_env): Adjust for disappearance of global
2247 * solib.c (solib_find): Use environment of the current inferior.
2249 2010-01-20 Jan Kratochvil <jan.kratochvil@redhat.com>
2251 * varobj.c (varobj_add_child, install_dynamic_child): Wrap into #if
2253 (instantiate_pretty_printer): Move HAVE_PYTHON outside of the function.
2255 2010-01-20 Joel Brobecker <brobecker@adacore.com>
2257 Get rid of ada-lang.c:function_name_from_pc.
2258 * ada-lang.c: Add "stack.h" #include.
2259 (function_name_from_pc): Delete.
2260 (is_known_support_routine): Replace call to function_name_from_pc
2261 by call to find_frame_funname.
2262 (ada_unhandled_exception_name_addr_from_raise): Likewise.
2264 2010-01-19 Tom Tromey <tromey@redhat.com>
2267 * dwarf2read.c (read_partial_die): Allocate partial DIE's name on
2270 2010-01-19 Tom Tromey <tromey@redhat.com>
2272 * top.c (stop_sig, float_handler, do_nothing): Remove.
2274 2010-01-19 Jan Kratochvil <jan.kratochvil@redhat.com>
2276 * breakpoint.c (watchpoint_check): Check the call
2277 gdbarch_in_function_epilogue_p before calling frame_find_by_id.
2279 * config/djgpp/fnchange.lst: Add translations for
2280 watchpoint-cond-gone.exp, watchpoint-cond-gone.c and
2281 watchpoint-cond-gone-stripped.c.
2283 2010-01-19 Tom Tromey <tromey@redhat.com>
2286 * dwarf2read.c (partial_die_parent_scope): Put enumeration type
2287 into parent scope, and enumerator into grandparent scope.
2289 2010-01-19 Joel Brobecker <brobecker@adacore.com>
2291 * NEWS: Add entry for "set/show ada trust-PAD-over-XVS" commands.
2293 2010-01-19 Joel Brobecker <brobecker@adacore.com>
2295 * configure.host: Make x86_64-*-solaris2.1[0-9]* an alias of
2296 i[34567]86-*-solaris2.1[0-9]*.
2297 * configure.tgt: Likewise.
2299 2010-01-19 Joel Brobecker <brobecker@adacore.com>
2301 * NEWS: Document the source command enhancement allowing it
2302 to load Python scripts. Document the "set/show script-extension"
2305 2010-01-19 Joel Brobecker <brobecker@adacore.com>
2307 Add -Wunused-function to compile flags.
2308 * configure.ac: Add -Wunused-function to build_warnings.
2309 * configure: Regenerate.
2311 2010-01-19 Joel Brobecker <brobecker@adacore.com>
2313 "delete" ada-lex.c:input function, not used.
2314 * ada-lex.l: #define YY_NO_INPUT.
2316 2010-01-19 Joel Brobecker <brobecker@adacore.com>
2318 Delete free_named_symtabs and associated cleanup.
2319 * symfile.h (free_named_symtabs): Delete declaration.
2320 * symfile.c: Remove some commented out code (clear_symtab_users_once).
2321 (cashier_psymtab): Comment function out.
2323 (free_named_symtabs): Delete.
2324 * coffread.c (coff_end_symtab): Remove call to free_named_symtabs.
2325 * dbxread.c (end_psymtab): Likewise.
2326 * dwarf2read.c (process_psymtab_comp_unit): Ditto.
2327 * exec.c (exec_close_1): Ditto.
2328 * xcoffread.c (xcoff_end_psymtab): Likewise.
2330 2010-01-19 Joel Brobecker <brobecker@adacore.com>
2332 * stack.c (print_block_frame_labels): Comment function out.
2334 2010-01-19 Joel Brobecker <brobecker@adacore.com>
2336 Delete unused or undefined functions.
2337 * breakpoint.c (ep_parse_optional_filename): Delete.
2338 * dcache.c (dcache_write_line): Remove declaration.
2339 * infrun.c (build_infrun): Remove declaration.
2340 * tracepoint.c (tracepoint_save_command): Remove declaration.
2341 * linux-nat.c (init_lwp_list): Delete. No longer used.
2342 * event-loop.c (check_async_signal_handlers): Delete declaration.
2343 * infrun.c (init_execution_control_state): Delete.
2344 (proceed): Update comment to avoid mentioning
2345 init_execution_control_state.
2346 * target.c (kill_or_be_killed, nosupport_runtime): Delete.
2347 * ada-lang.c (ada_to_static_fixed_value): Delete.
2348 * scm-lang.c (evaluate_subexp_scm): Delete declaration.
2349 * cp-namespace.c (cp_copy_usings): Delete.
2350 * xml-syscall.c (xml_number_of_syscalls): Delete.
2351 * progspace.c (find_program_space_by_num): Delete.
2352 * inflow.c (handle_sigio): Delete declaration.
2353 * hppa-tdep.c (hppa_alignof): Delete.
2354 * mipsnbsd-tdep.c (mipsnbsd_sigtramp_offset)
2355 (mipsnbsd_core_osabi_sniffer): Delete.
2357 2010-01-18 Tom Tromey <tromey@redhat.com>
2360 * c-exp.y (REINTERPRET_CAST, DYNAMIC_CAST, STATIC_CAST)
2361 (CONST_CAST): New tokens.
2362 (exp): Add new productions.
2363 (ident_tokens): Add const_cast, dynamic_cast, static_cast, and
2365 (is_cast_operator): New function.
2366 (yylex): Handle cast operators specially.
2367 * eval.c (evaluate_subexp_standard) <UNOP_DYNAMIC_CAST,
2368 UNOP_REINTERPRET_CAST>: New cases.
2369 * expprint.c (print_subexp_standard): Likewise.
2370 (op_name_standard): Likewise.
2371 (dump_subexp_body_standard): Likewise.
2372 * parse.c (operator_length_standard): Likewise.
2373 * expression.h (enum exp_opcode): New constants UNOP_DYNAMIC_CAST,
2374 UNOP_REINTERPRET_CAST.
2375 * gdbtypes.c (class_types_same_p): New function.
2376 (is_ancestor): Use it.
2377 (is_public_ancestor): New function.
2378 (is_unique_ancestor_worker): Likewise.
2379 (is_unique_ancestor): Likewise.
2380 * gdbtypes.h (class_types_same_p, is_public_ancestor)
2381 (is_unique_ancestor): Declare.
2382 * valops.c (value_reinterpret_cast): New function.
2383 (dynamic_cast_check_1): Likewise.
2384 (dynamic_cast_check_2): Likewise.
2385 (value_dynamic_cast): Likewise.
2386 * value.h (value_reinterpret_cast, value_dynamic_cast): Declare.
2388 2010-01-18 Joel Brobecker <brobecker@adacore.com>
2390 Fix build failure when building without Python support.
2391 * python/python.c: Always include exceptions.h, even when HAVE_PYTHON
2394 2010-01-18 Joel Brobecker <brobecker@adacore.com>
2396 Use XVS field type instead of doing a parallel lookup.
2397 * ada-lang.c (ada_get_base_type): Follow the XVS field type
2398 if it is a reference type instead of doing a type lookup using
2401 2010-01-18 Joel Brobecker <brobecker@adacore.com>
2403 Trust PAD types instead of using PAD___XVS.
2404 * ada-lang.c (trust_pad_over_xvs): New static variable.
2405 (ada_is_aligner_type): If !trust_pad_over_xvs and there is a
2406 parallel XVS type, follow the XVS type instead of the PAD type.
2407 (unwrap_value): Make sure that there is no parallel XVE type
2408 before returning the value as is.
2409 (set_ada_list, show_ada_list): New static variables.
2410 (set_ada_command, show_ada_command): New functions.
2411 (_initialize_ada_language): Add new "set/show ada" prefix commands.
2412 Add new "set/show ada trust-PAD-over-XVS" setting.
2414 2010-01-18 Tom Tromey <tromey@redhat.com>
2415 Thiago Jung Bauermann <bauerman@br.ibm.com>
2417 Allow "source" to load python scripts.
2418 * exceptions.h (enum errors): Add UNSUPPORTED_ERROR.
2419 * python/python.c (source_python_script): New function.
2420 * python/python.h (source_python_script): Add declaration.
2421 * cli/cli-cmds.c: #include exceptions.h and python/python.h.
2422 (script_ext_off, script_ext_soft, script_ext_strict)
2423 (script_ext_enums, script_ext_mode): New static constants.
2424 (show_script_ext_mode, find_and_open_script): New functions.
2425 (source_script): Enhance to handle Python scripts.
2426 (init_cli_cmds): Add set/show script-extension commands.
2428 2010-01-16 Stan Shebs <stan@codesourcery.com>
2430 * tracepoint.h (struct trace_status): Use unsigned long long
2432 * tracepoint.c (trace_status_command): Fix printf directive.
2433 (trace_save_command): Check fwrite returns, fix printf directive.
2434 (trace_filename): New global.
2435 (tfile_open): Set it, check read returns.
2436 (tfile_close): Free trace_filename.
2437 (tfile_get_traceframe_address): Check read returns.
2438 (tfile_trace_find): Ditto.
2439 (tfile_fetch_registers): Ditto.
2440 (tfile_xfer_partial): Ditto.
2441 (tfile_get_trace_state_variable_value): Ditto.
2443 2010-01-15 Stan Shebs <stan@codesourcery.com>
2445 Add trace file support.
2446 * tracepoint.h (enum trace_stop_reason): New enum.
2447 (struct trace_status): New struct.
2448 (parse_trace_status): Declare.
2449 (struct uploaded_tp): Move here from remote.c,
2450 add fields for actions.
2451 (struct uploaded_tsv): New struct.
2452 * tracepoint.c (tfile_ops): New target vector.
2453 (trace_fd): New global.
2454 (tfile_open): New function.
2455 (tfile_close): New function.
2456 (tfile_files_info): New function.
2457 (tfile_get_trace_status): New function.
2458 (tfile_get_traceframe_address): New function.
2459 (tfile_trace_find): New function.
2460 (tfile_fetch_registers): New function.
2461 (tfile_xfer_partial): New function.
2462 (tfile_get_trace_state_variable_value): New function.
2463 (init_tfile_ops): New function.
2464 (_initialize_tracepoint): Call it, add tfile target.
2465 (trace_status): New global.
2466 (current_trace_status): New function.
2467 (trace_running_p): Remove, change all users to get from
2468 current_trace_status()->running.
2469 (get_trace_status): Remove.
2470 (trace_status_command): Call target_get_trace_status directly,
2471 report more detail including tracing stop reasons.
2472 (trace_find_command): Always allow tfind on a file.
2473 (trace_find_pc_command): Ditto.
2474 (trace_find_tracepoint_command): Ditto.
2475 (trace_find_line_command): Ditto.
2476 (trace_find_range_command): Ditto.
2477 (trace_find_outside_command): Ditto.
2478 (trace_frames_offset, cur_offset): Declare as off_t.
2479 (trace_regblock_size): Rename from reg_size, update users.
2480 (parse_trace_status): New function.
2481 (tfile_interp_line): New function.
2482 (disconnect_or_stop_tracing): Ensure current trace
2483 status before asking what to do.
2484 (stop_reason_names): New global.
2485 (trace_save_command): New command.
2486 (get_uploaded_tp): Move here from remote.c.
2487 (find_matching_tracepoint): Ditto.
2488 (merge_uploaded_tracepoints): New function.
2489 (parse_trace_status): Use stop_reason_names.
2490 (_initialize_tracepoint): Define tsave command.
2491 * target.h (target_ops): New fields to_save_trace_data,
2492 to_upload_tracepoints, to_upload_trace_state_variables,
2493 to_get_raw_trace_data, change to_get_trace_status
2494 to take a pointer to a status struct.
2495 (target_save_trace_data): New macro.
2496 (target_upload_tracepoints): New macro.
2497 (target_upload_trace_state_variables): New macro.
2498 (target_get_raw_trace_data): New macro.
2499 * target.c (update_current_target): Add new methods, change
2500 signature of to_get_trace_status.
2501 * remote.c (hex2bin): Make globally visible.
2503 (remote_download_trace_state_variable): Download name also.
2504 (remote_get_trace_status): Update parameter, use
2506 (remote_save_trace_data): New function.
2507 (remote_upload_tracepoints): New function.
2508 (remote_upload_trace_state_variables): New function.
2509 (remote_get_raw_trace_data): New function.
2510 (remote_start_remote): Use them.
2511 (_initialize_remote_ops): Add operations.
2512 * ax-gdb.c: Include breakpoint.h.
2513 * breakpoint.c (create_tracepoint_from_upload): Use
2514 break_command_really, return tracepoint, warn about unimplemented
2516 * NEWS: Mention trace file addition.
2518 2010-01-15 Jan Kratochvil <jan.kratochvil@redhat.com>
2520 Fix compilation warning on gcc-3.4.
2521 * exec.c (print_section_info): Move the `displacement' variable
2522 initialization to its declaration.
2524 2010-01-15 Jan Kratochvil <jan.kratochvil@redhat.com>
2526 * gdb-gdb.py (StructMainTypePrettyPrinter): Fix TYPE_CODE_RANGE
2529 2010-01-15 Eric Botcazou <botcazou@adacore.com>
2531 "info tasks" broken by typedefs in ATCB type definitions.
2532 * ada-lang.c (ada_template_to_fixed_record_type_1): Add call to
2533 ada_check_typedef before retrieving the length of the type for
2536 2010-01-15 Joel Brobecker <brobecker@adacore.com>
2538 Do not use name-based lookup for unconstrained packed arrays.
2539 * ada-lang.c (find_parallel_type_by_descriptive_type):
2540 Limit the fallback to name-based lookups to the case where
2541 the type is a constrained packed array.
2543 2010-01-15 Joel Brobecker <brobecker@adacore.com>
2545 Enhance gdb-gdb.py to handle main_type.type_specific.
2546 * gdb-gdb.py: Print the type-specific part of struct main_type.
2548 2010-01-15 Jan Kratochvil <jan.kratochvil@redhat.com>
2550 * configure.ac (AC_CHECK_FUNCS): Check for setrlimit and getrlimit.
2551 * configure: Regenerate.
2552 * config.in: Regenerate.
2553 * utils.c: Include sys/resource.h.
2554 (dump_core, can_dump_core): New.
2555 (internal_vproblem): Update the comment. Check can_dump_core while
2556 setting dump_core_p. Replace two abort calls by dump_core calls.
2558 2010-01-14 Jan Kratochvil <jan.kratochvil@redhat.com>
2559 Eli Zaretskii <eliz@gnu.org>
2561 * NEWS: Document the PIE support.
2563 2010-01-14 Jan Kratochvil <jan.kratochvil@redhat.com>
2565 * linux-tdep.c: Remove includes gdbcore.h, observer.h and elf-bfd.h.
2566 (check_is_pie_binary, _initialize_linux_tdep): Remove.
2568 2010-01-14 Jan Kratochvil <jan.kratochvil@redhat.com>
2570 * solib-svr4.c (svr4_exec_displacement): New comment for entry_point.
2571 Replace exec_entry_point call by bfd_get_start_address.
2573 2010-01-14 Jan Kratochvil <jan.kratochvil@redhat.com>
2575 Support Valgrind attachments broken by the PIE support.
2576 * auxv.c: Include gdbcore.h.
2577 (procfs_xfer_auxv): Make static. Reduce its comment. Drop its
2578 parameters ops, object and annex. Remove their assertions.
2579 (ld_so_xfer_auxv, memory_xfer_auxv): New function.
2580 * auxv.h (procfs_xfer_auxv): Remove comment. Rename to ...
2581 (memory_xfer_auxv): ... here.
2582 * linux-nat.c (linux_xfer_partial): Rename procfs_xfer_auxv to
2584 * procfs.c (procfs_xfer_partial): Likewise.
2585 * solib-svr4.c (svr4_relocate_main_executable): New prototype.
2586 (svr4_special_symbol_handling): Call svr4_relocate_main_executable.
2587 (svr4_solib_create_inferior_hook): Conditionalize the
2588 svr4_relocate_main_executable call.
2590 2010-01-14 Jan Kratochvil <jan.kratochvil@redhat.com>
2592 * solib-svr4.c (scan_dyntag): Remove variable dyn_addr. New variable
2593 target_section. Find SECT in current_target_sections, gdb_assert it.
2594 (elf_lookup_lib_symbol): Pass the binary file if given symfile_objfile.
2596 * symtab.c (lookup_objfile_from_block): Return the binary file instead
2597 of separate debug info file.
2599 2010-01-14 Jan Kratochvil <jan.kratochvil@redhat.com>
2601 Support PIEs with no symfile_objfile.
2602 * exec.c (print_section_info <abfd == exec_bfd>): Relocate Entry point.
2603 * solib-svr4.c (svr4_relocate_main_executable <exec_bfd>): New block.
2605 2010-01-14 Jan Kratochvil <jan.kratochvil@redhat.com>
2607 * solib-svr4.c (svr4_relocate_main_executable): Move the static exec
2609 (svr4_static_exec_displacement): ... a new function.
2610 (svr4_exec_displacement): New function.
2611 (svr4_relocate_main_executable): Call svr4_exec_displacement. Allocate
2612 new_offsets using alloca now. Remove variable old_chain and changed.
2613 Call objfile_relocate unconditionally now.
2615 2010-01-14 Doug Evans <dje@google.com>
2617 * gdbtypes.c (arch_flags_type): Fix comment.
2618 * gdbtypes.h (arch_composite_type): Fix comment.
2620 2009-01-14 Tristan Gingold <gingold@adacore.com>
2622 * machoread.c (macho_add_oso_symfile): Add symfile_flags parameter.
2623 Call xstrdup for abfd->filename. Pass symfile_flags and objfile flags
2624 to symbol_file_add_from_bfd. Add OSO as separate objfile.
2625 (macho_oso_symfile): Add symfile_flags parameter. Pass it to
2626 macho_add_oso_symfile.
2627 (macho_symfile_read): Pass symfile_flags to macho_oso_symfile.
2629 2010-01-14 Joel Brobecker <brobecker@adacore.com>
2631 Tru64: Dead threads are never deleted.
2632 * dec-thread.c (dec_thread_ptid_is_alive): New function.
2633 (dec_thread_count_gdb_threads): Fix counter increment.
2634 (dec_thread_add_gdb_thread): Fix *listp increment.
2635 (resync_thread_list): Fix bug in deletion of dead threads that
2636 caused all threads to be deleted, instead of just the dead ones.
2638 2010-01-13 Phil Muldoon <pmuldoon@redhat.com>
2642 * python/python-internal.h: Add lazy_string_object_type
2644 (create_lazy_string_object, gdbpy_initialize_lazy_string)
2645 (gdbpy_is_lazystring, gdbpy_extract_lazy_string): Define.
2646 * python/py-value.c (valpy_lazy_string): New function.
2647 (convert_value_from_python): Add lazy string conversion.
2648 * python/py-prettyprint.c (pretty_print_one_value): Check if
2649 return is also a lazy string.
2650 (print_string_repr): Add lazy string printing branch.
2651 (print_children): Likewise.
2652 * python/py-lazy-string.c: New file. Implement lazy strings.
2653 * python/python.c (_initialize_python): Call
2654 gdbpy_initialize_lazy_string.
2655 * varobj.c (value_get_print_value): Add lazy string printing
2656 branch. Account for encoding.
2657 * c-lang.c (c_printstr): Account for new encoding argument. If
2658 encoding is NULL, find encoding suited for type, otherwise use
2660 * language.h (language_defn): Add encoding argument.
2661 (LA_PRINT_STRING): Likewise.
2662 * language.c (unk_lang_printstr): Update to reflect new encoding
2663 argument to language_defn.
2664 * ada-lang.h (ada_printstr): Likewise.
2665 * c-lang.h (c_printstr): Likewise.
2666 * p-lang.h (pascal_printstr);
2667 * f-lang.c (f_printstr): Likewise.
2668 * m2-lang.c (m2_printstr): Likewise.
2669 * objc-lang.c (objc_printstr): Likewise.
2670 * p-lang.c (pascal_printstr): Likewise.
2671 * scm-lang.c (scm_printstr): Likewise.
2672 * c-valprint.c (c_val_print): Update LA_PRINT_STRING call for
2674 * ada-valprint.c (ada_printstr): Likewise.
2675 * f-valprint.c (f_val_print): Likewise
2676 * m2-valprint.c (m2_val_print): Likewise.
2677 * p-valprint.c (pascal_val_print): Likewise.
2678 * expprint.c (print_subexp_standard): Likewise.
2679 * valprint.c (val_print_string): Likewise.
2680 * Makefile.in (SUBDIR_PYTHON_OBS): Add py-lazy-string.
2681 (SUBDIR_PYTHON_SRCS): Likewise.
2682 (py-lazy-string.o): New rule.
2684 2010-01-13 Doug Evans <dje@google.com>
2686 * mi/mi-main.c (list_available_thread_groups): Avoid "may be used
2687 uninitialized" warning from gcc on local `tree'.
2689 2010-01-13 Vladimir Prus <vladimir@codesourcery.com>
2691 Implement core awareness.
2693 * bcache.c (compare_ints): Remove
2694 (print_percentage): Use compare_positive_ints.
2695 * defs.h (compare_positive_ints): Declare.
2696 * linux-nat.h (struct lin_lwp): New field core.
2697 (linux_nat_core_of_thread_1): Declare.
2698 * linux-nat.c (add_lwp): Init the 'core' field.
2699 (linux_nat_wait_1): Record the core.
2700 (linux_nat_core_of_thread_1, linux_nat_core_of_thread): New.
2701 (linux_nat_add_target): Register the above.
2702 * linux-thread-db.c (update_thread_core): New.
2703 (thread_db_find_new_threads): Update core information for
2705 * remote.c (struct private_thread_info): New.
2706 (free_private_thread_info, demand_private_info): New.
2707 (PACKET_qXfer_threads, use_osdata_threads): New.
2708 (struct thread_item, threads_parsing_context
2709 (start_thread, end_thread, thread_attributes)
2710 (thread_children, threads_children, threads_elements): New.
2711 (remote_threads_info): Try qXfer:threads before anything
2713 (remote_protocol_packets): Register qXfer:threads.
2714 (remote_open_1): Init use_osdata_threads.
2715 (struct stop_reply): New field 'core'.
2716 (remote_parse_stop_reply): Parse core number.
2717 (process_stop_reply): Record core number.
2718 (remote_xfer_partial): Handle qXfer:threads.
2719 (remote_core_of_thread): New.
2720 (init_remote_ops): Register remote_core_of_thread.
2721 (_initialize_remote): Register qXfer:read.
2722 * target.c (target_core_of_thread): New
2723 * target.h (enum target_object): New value TARGET_OBJECT_THREADS.
2724 (struct target_ops): New field to_core_of_threads.
2725 (target_core_of_thread): Declare.
2726 * gdbthread.h (struct thread_info): New field private_dtor.
2727 * thread.c (print_thread_info): Report the core.
2728 * ui-out.c (MAX_UI_OUT_LEVELS): Increase.
2729 * utils.c (compare_positive_ints): New.
2730 * features/threads.dtd: New.
2731 * mi/mi-interp.c (mi_on_normal_stop): Report the core.
2732 * mi/mi-main.c (struct collect_cores_data, collect_cores)
2733 (do_nothing, free_vector_of_osdata_items)
2734 (splay_tree_int_comparator, free_splay_tree): New.
2735 (print_one_inferior_data): Implemented printing of selected
2736 inferiors. Collect and print cores.
2737 (output_cores): New.
2738 (mi_cmd_list_thread_groups): Support --recurse. Permit specifying
2739 thread groups together with --available.
2741 2010-01-12 Jan Kratochvil <jan.kratochvil@redhat.com>
2743 * configure: Regenerate (for _STRUCTURED_PROC).
2745 2010-01-12 Joel Brobecker <brobecker@adacore.com>
2747 Delete dead function.
2748 * ada-lang.c (extract_string): Delete. No longer used.
2750 2010-01-12 Joel Brobecker <brobecker@adacore.com>
2752 Fix -Wunused warning in dec-thread.c.
2753 * dec-thread.c (dec_thread_count_gdb_threads)
2754 (dec_thread_add_gdb_thread): Prevent -Wunused warning.
2756 2010-01-12 Joel Brobecker <brobecker@adacore.com>
2758 * ada-valprint.c (ada_print_floating): Remove trailing space.
2760 2010-01-12 Joel Brobecker <brobecker@adacore.com>
2762 Add support for DW_AT_GNAT_descriptive_type.
2763 * gdbtypes.h (enum type_specific_kind): New enum.
2764 (struct main_type) [type_specific_field]: New component.
2765 [type_specific]: Add new component "gnat_stuff".
2766 (struct gnat_aux_type): New type.
2767 (INIT_CPLUS_SPECIFIC): Also set TYPE_SPECIFIC_FIELD (type).
2768 (HAVE_CPLUS_STRUCT): Also check TYPE_SPECIFIC_FIELD (type).
2769 (gnat_aux_default, allocate_gnat_aux_type): Add declaration.
2770 (INIT_GNAT_SPECIFIC, ALLOCATE_GNAT_AUX_TYPE, HAVE_GNAT_AUX_INFO)
2771 (TYPE_SPECIFIC_FIELD): New macros.
2772 (TYPE_CPLUS_SPECIFIC): Return cplus_struct_default if the given
2773 type does not hold any cplus-specific data.
2774 (TYPE_RAW_CPLUS_SPECIFIC): New macro.
2775 (TYPE_GNAT_SPECIFIC, TYPE_DESCRIPTIVE_TYPE): New macros.
2776 (TYPE_IS_OPAQUE): Use HAVE_CPLUS_STRUCT to check if type has
2777 cplus-specific data.
2778 * gdbtypes.c (allocate_cplus_struct_type): Minor stylistic rewrite.
2779 Set new component TYPE_SPECIFIC_FIELD (type).
2780 (gnat_aux_default): New constant.
2781 (allocate_gnat_aux_type): New function.
2782 (init_type): Add initialization the type-specific stuff for
2783 TYPE_CODE_FLT and TYPE_CODE_FUNC types.
2784 (print_gnat_stuff): New function.
2785 (recursive_dump_type): Use HAVE_CPLUS_STRUCT to check for cplus-
2786 specific data. Adjust code that prints the contents of the
2787 type-specific union using the TYPE_SPECIFIC_FIELD value.
2788 * dwarf2read.c (dwarf2_attach_fields_to_type): Do not allocate
2789 the type cplus stuff for Ada types.
2790 (dwarf2_add_member_fn, dwarf2_attach_fn_fields_to_type):
2791 Error out if these routines are called with an Ada type.
2792 (read_structure_type, read_array_type, read_subrange_type):
2793 Add call to set_descriptive_type.
2794 (set_die_type): Initialize the gnat-specific data if necessary.
2795 (need_gnat_info, die_descriptive_type, set_descriptive_type):
2797 * ada-lang.c (decode_constrained_packed_array_type): Use
2798 decode_constrained_packed_array_type instead of doing a standard
2799 lookup to locate a parallel type.
2800 (find_parallel_type_by_descriptive_type): New function.
2801 (ada_find_parallel_type_with_name): New function.
2802 (ada_find_parallel_type): Reimplement using
2803 ada_find_parallel_type_with_name.
2804 * ada-valprint.c (print_field_values): Use HAVE_CPLUS_STRUCT
2805 to check if type has a cplus stuff.
2806 * linespec.c (total_number_of_methods): Likewise.
2807 * mdebugread.c (new_type): Likewise.
2809 2010-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
2811 * NEWS: Document the 0b binary number prefix parsing.
2813 2010-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
2815 * objfiles.c (objfile_relocate1): Change the return type to int.
2816 Describe the new return value. Return non-zero if data changed.
2817 (objfile_relocate): New variable changed. Set it. Call
2818 breakpoint_re_set depending on CHANGED.
2820 2010-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
2822 Implement binary numbers parsing.
2823 * c-exp.y (parse_number): New case 'b' and 'B'.
2825 2010-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
2826 Tristan Gingold <gingold@adacore.com>
2828 * solib.c (info_sharedlibrary_command): Replace
2829 objfile_has_partial_symbols and objfile_has_full_symbols calls by
2830 objfile_has_symbols.
2832 2010-01-10 Joel Brobecker <brobecker@adacore.com>
2834 * NEWS: Document the improvements made to the mips-irix port.
2836 2010-01-09 Joel Brobecker <brobecker@adacore.com>
2838 Fix the documentation of valprint.c:value_print.
2839 * valprint.c (value_print): Update the function description to
2840 mention that the syntax of the output follows the current_language,
2843 2010-01-09 Jan Kratochvil <jan.kratochvil@redhat.com>
2845 Fix displacement of separate debug info files.
2846 * objfiles.c (objfile_relocate): Rename to ...
2847 (objfile_relocate1): ... here and make it static. Extend the comment.
2848 (objfile_relocate): New function.
2849 * solib-spu.c (spu_relocate_main_executable): Explicitly check if
2850 SYMFILE_OBJFILE is NULL. Remove variables objfile and old_chain.
2851 Remove following of SEPARATE_DEBUG_OBJFILE. new_offsets is now
2852 allocated using alloca.
2853 * symfile.c (copy_section_addr_info): Remove.
2854 (build_section_addr_info_from_objfile): Make it global. New variables
2855 addr_bit and mask, use them.
2856 * symfile.h (build_section_addr_info_from_objfile): New prototype.
2857 (copy_section_addr_info): Remove.
2859 2010-01-09 Joel Brobecker <brobecker@adacore.com>
2861 Signal unwinder for mips-irix N32.
2862 * mips-irix-tdep.c: #include mips-tdep.h, trad-frame.h, and
2864 (SIGTRAMP_FRAME_SIZE, SIGCONTEXT_PC_OFF, SIGCONTEXT_REGS_OFF)
2865 (SIGCONTEXT_FPREGS_OFF, SIGCONTEXT_FPCSR_OFF, SIGCONTEXT_HI_OFF)
2866 (SIGCONTEXT_LO_OFF): New macros.
2867 (mips_irix_n32_tramp_frame_init): New function.
2868 (mips_irix_n32_tramp_frame): New static constant.
2869 (mips_irix_init_abi): Prepend the mips_irix_n32_tramp_frame unwinder.
2871 2010-01-09 Joel Brobecker <brobecker@adacore.com>
2873 Breakpoint in shared library does not work on mips-irix.
2874 * procfs.c: #include "observer.h".
2875 (procfs_inferior_created): New function, moving here the code
2876 which unsets the syssgi syscall-exit notifications.
2877 (procfs_create_inferior): Remove the code which unsets the syssgi
2878 syscall-exit notifications. It is too early to do this here.
2879 (_initialize_procfs): Attach the procfs_inferior_created observer.
2881 2010-01-09 Joel Brobecker <brobecker@adacore.com>
2883 Wrong return convention for arrays (mips-irix).
2884 * mips-tdep.c (mips_n32n64_return_value): Arrays whose size is
2885 128 bits or smaller are returned the same way as structs
2886 and unions of the the same size.
2888 2010-01-09 Joel Brobecker <brobecker@adacore.com>
2890 Cannot set the PC on mips-irix.
2891 * irix5-nat.c (fill_gregset): Check regno against the raw PC
2892 register number, no the cooked one.
2894 2010-01-09 Joel Brobecker <brobecker@adacore.com>
2896 Error while loading core file on mips-irix.
2897 * solib-irix.c (irix_solib_create_inferior_hook): Do nothing
2898 if debugging from a core file.
2900 2010-01-09 Joel Brobecker <brobecker@adacore.com>
2902 GDB hangs when attaching to process on mips-irix.
2903 * solib-irix.c (irix_solib_create_inferior_hook): Do nothing if
2904 attaching to a process.
2906 2010-01-09 Joel Brobecker <brobecker@adacore.com>
2908 Use the correct breakpoint instruction on mips-irix.
2909 * mips-tdep.c (mips_breakpoint_from_pc): Add new static variable
2910 containing the correct breakpoint instruction to use on mips-irix.
2911 Use it when the osabi is GDB_OSABI_IRIX.
2913 2010-01-09 Joel Brobecker <brobecker@adacore.com>
2915 -Wunused warning in procfs.c (mips-irix only).
2916 * procfs.c (gdb_praddset, gdb_prdelset): New macros. Use them
2917 throughout instead of using praddset and prdelset respectively.
2919 2010-01-09 Joel Brobecker <brobecker@adacore.com>
2921 GDB crash while stepping into function.
2922 * infrun.c (handle_inferior_event): Refetch the current frame
2923 after handling what.main_action, in case that pointer became
2926 2010-01-09 Joel Brobecker <brobecker@adacore.com>
2928 Fix build failure of solaris-hosted cross debuggers.
2929 * ada-valprint.c, parse.c: Include defs.h before including ctype.h.
2931 2010-01-09 Daniel Gutson <dgutson@codesourcery.com>
2933 Fix build failure on sparc-solaris.
2934 * procfs.c: (procfs_do_thread_registers) Use elfcore_write_lwpstatus.
2936 2010-01-08 Jan Kratochvil <jan.kratochvil@redhat.com>
2938 Move some symfile code into subroutines.
2939 * symfile.h (relative_addr_info_to_section_offsets)
2940 (addr_info_make_relative): New prototypes.
2941 * symfile.c (default_symfile_offsets): Move a part to ...
2942 (relative_addr_info_to_section_offsets): ... this new function.
2943 (default_symfile_offsets): Call it.
2944 (syms_from_objfile <!mainline && addrs && addrs->other[0].name>): Move
2946 (addr_info_make_relative): ... this new function.
2948 2010-01-08 Jan Kratochvil <jan.kratochvil@redhat.com>
2950 Add from_tty to solib_create_inferior_hook.
2951 * infcmd.c (post_create_inferior): Move solib_add after
2952 solib_create_inferior_hook. Pass from_tty to
2953 solib_create_inferior_hook. Call solib_add and SOLIB_ADD with
2954 0 from_tty and comment why.
2955 * infrun.c (follow_exec): Pass from_tty solib_create_inferior_hook as 0.
2956 * linux-nat.c (linux_child_follow_fork): Likewise.
2957 * nto-procfs.c (procfs_post_attach, procfs_create_inferior): Likewise.
2958 * solib-darwin.c (darwin_solib_create_inferior_hook): New parameter
2960 * solib-frv.c (frv_solib_create_inferior_hook): Likewise.
2961 * solib-irix.c (irix_solib_create_inferior_hook): Likewise.
2962 * solib-null.c (null_solib_create_inferior_hook): Likewise.
2963 * solib-osf.c (osf_solib_create_inferior_hook): Likewise.
2964 * solib-pa64.c (pa64_solib_create_inferior_hook): Likewise.
2965 * solib-som.c (som_solib_create_inferior_hook): Likewise.
2966 * solib-spu.c (spu_solib_create_inferior_hook): New parameter from_tty.
2967 Pass it to svr4_so_ops.solib_create_inferior_hook.
2968 * solib-sunos.c (sunos_solib_create_inferior_hook): New parameter
2970 * solib-svr4.c (enable_break): New parameter from_tty. Pass it to
2972 (svr4_solib_create_inferior_hook): New parameter from_tty. Pass it to
2974 * solib-target.c (solib_target_solib_create_inferior_hook): New
2976 * solib.c (solib_create_inferior_hook): New parameter from_tty. Pass
2977 it to ops->solib_create_inferior_hook.
2978 (reload_shared_libraries): Pass from_tty to solib_create_inferior_hook.
2979 Move solib_add after solib_create_inferior_hook, call it now with
2980 from_tty as 0. New comment there.
2981 * solib.h (solib_create_inferior_hook): New parameter from_tty.
2982 * solist.h (struct target_so_ops <solib_create_inferior_hook>):
2985 2010-01-08 Vladimir Prus <vladimir@codesourcery.com>
2988 * infrun.c (handle_inferior_event): Use get_thread_regcache
2989 with events ptid, not get_current_regcache.
2991 2009-01-08 Joel Brobecker <brobecker@adacore.com>
2993 GDB crash with empty executable name (MinGW).
2994 * source.c (openp): Add assert that parameter string is not NULL.
2995 if parameter string is an empty string, then return with a failure
2998 2009-01-08 Joel Brobecker <brobecker@adacore.com>
3000 Get rid of support for VAX Floats.
3001 * ada-lang.h (ada_is_vax_floating_type, ada_vax_float_type_suffix)
3002 (ada_vax_float_print_function): Delete.
3003 * ada-lang.c (ada_is_vax_floating_type, ada_vax_float_type_suffix)
3004 (ada_vax_float_print_function): Delete.
3005 * ada-typeprint.c (print_vax_floating_point_type): Delete.
3006 (ada_print_type): Remove support for VAX floats.
3007 * ada-valprint.c (ada_val_print_1): Remove support for VAX floats.
3009 2010-01-08 Jan Kratochvil <jan.kratochvil@redhat.com>
3011 * stabsread.c (read_args): Handle zero arguments.
3013 2009-01-08 Joel Brobecker <brobecker@adacore.com>
3015 Cannot find in-tree libiconv.a after reconfigure.
3016 * acinclude.m4 (AM_ICONV): If we find an in-tree libiconv.a
3017 that we can use, then cache the path to this archive.
3018 * configure: Regenerate.
3020 2010-01-07 Stan Shebs <stan@codesourcery.com>
3022 Make tracepoint operations go through target vector.
3023 * target.h (enum trace_find_type): New enum.
3024 (struct target_ops): New fields to_trace_init,
3025 to_download_tracepoint, to_download_trace_state_variable,
3026 to_trace_set_readonly_regions, to_trace_start, to_get_trace_status,
3027 to_trace_stop, to_trace_find, to_get_trace_state_variable_value,
3028 to_set_disconnected_tracing.
3029 (target_trace_init): New macro.
3030 (target_download_tracepoint): New macro.
3031 (target_download_trace_state_variable): New macro.
3032 (target_trace_start): New macro.
3033 (target_trace_set_readonly_regions): New macro.
3034 (target_get_trace_status): New macro.
3035 (target_trace_stop): New macro.
3036 (target_trace_find): New macro.
3037 (target_get_trace_state_variable_value): New macro.
3038 (target_set_disconnected_tracing): New macro.
3039 * target.c (update_current_target): Inherit and set defaults for
3040 tracepoint operations.
3041 * tracepoint.c (default_collect): Make globally visible.
3042 (target_is_remote): Remove, along with all calls.
3043 (tvariables_info): Call target_get_trace_state_variable_value.
3044 (remote_set_transparent_ranges): Remove.
3045 (trace_start_command): Call target_trace_init,
3046 target_download_tracepoint, etc.
3047 (download_tracepoint): Remove.
3048 (trace_stop_command): Simplify.
3049 (stop_tracing): Call target_trace_stop.
3050 (get_trace_status): Call target_get_trace_status.
3051 (trace_status_command): Add case for targets that cannot trace.
3052 (finish_tfind_command): Change to take numerical arguments, call
3054 (trace_find_command): Update call to finish_tfind_command.
3055 (trace_find_pc_command): Ditto.
3056 (trace_find_tracepoint_command): Ditto.
3057 (trace_find_line_command): Ditto.
3058 (trace_find_range_command): Ditto.
3059 (trace_find_outside_command): Ditto.
3060 (set_disconnected_tracing_value): Call
3061 target_set_disconnected_tracing.
3062 * remote.c: Add protocol encoding bits from tracepoint.c.
3063 (trace_error): Move from tracepoint.c.
3064 (remote_get_noisy_reply): Ditto.
3065 (free_actions_list_cleanup_wrapper): Ditto.
3066 (free_actions_list): Ditto.
3067 (remote_trace_init): New function.
3068 (remote_download_tracepoint): New function.
3069 (remote_download_trace_state_variable): New function.
3070 (remote_trace_set_readonly_regions): New function.
3071 (remote_trace_start): New function.
3072 (remote_get_trace_status): New function.
3073 (remote_trace_stop): New function.
3074 (remote_trace_find): New function.
3075 (remote_download_trace_state_variable): New function.
3076 (remote_set_disconnected_tracing): New function.
3077 (init_remote_ops): Add tracepoint operations.
3079 * tracepoint.c (trace_dump_command): Don't decr_pc_after_break.
3081 2010-01-07 Tristan Gingold <gingold@adacore.com>
3083 * symfile.c (build_section_addr_info_from_objfile): New function.
3084 (symbol_file_add_separate): Don't use offsets from objfile but
3087 2010-01-06 Stan Shebs <stan@codesourcery.com>
3089 Support disconnected tracing.
3090 * infcmd.c (detach_command): Ask whether to stop tracing.
3091 * cli/cli-cmds.c (quit_command): Ditto.
3092 * breakpoint.h (struct breakpoint): New field number_on_target.
3093 * breakpoint.c (create_tracepoint_from_upload): New function.
3094 (get_tracepoint_by_number_on_target): New function.
3095 * remote.c (struct remote): New field disconnected_tracing.
3096 (remote_disconnected_tracing_feature): New function.
3097 (remote_protocol_features): Add DisconnectedTracing.
3098 (struct uploaded_tp): New struct.
3099 (uploaded_tps): New global.
3100 (get_uploaded_tp): New function.
3101 (find_matching_tracepoint): New function.
3102 (remote_get_tracing_state): New function.
3103 (remote_start_remote): Call it.
3104 * tracepoint.c (disconnected_tracing): New global.
3105 (trace_start_command): Initialize number_on_target.
3106 (stop_tracing): New function, split out from...
3107 (trace_stop_command): Call stop_tracing.
3108 (get_trace_status): New function, split out from...
3109 (trace_status_command): Call get_trace_status, add info on
3110 disconnection behavior.
3111 (disconnect_or_stop_tracing): New function.
3112 (finish_tfind_command): Translate from number on target.
3113 (trace_find_tracepoint_command): Translate to number on target.
3114 (send_disconnected_tracing_value): New function.
3115 (set_disconnected_tracing): New function.
3116 (_initialize_tracepoint): Add disconnected-tracing variable.
3117 * NEWS: Mention disconnected tracing.
3119 2010-01-06 Tristan Gingold <gingold@adacore.com>
3121 * symtab.c (lookup_global_symbol_from_objfile): Rename objfile
3122 parameter to main_objfile. Iterate on all separate debug objfiles.
3123 * symfile.h (symbol_file_add_separate)
3124 (find_separate_debug_file_by_debuglink): Remove parameter names.
3125 * symfile.c (symbol_file_add_separate): Use add_separate_objfile.
3126 (reread_symbols): Use free_objfile_separate_debug.
3127 * objfiles.h (struct objfile): Add separate_debug_objfile_link.
3129 (objfile_separate_debug_iterate, add_separate_debug_objfile)
3130 (free_objfile_separate_debug): New prototypes.
3131 * objfiles.c (objfile_separate_debug_iterate): New function.
3132 (add_separate_debug_objfile, free_objfile_separate_debug): New
3134 (free_objfile): Use free_objfile_separate_debug. Adjust for
3135 multiple separate debug objfile.
3136 (objfile_has_symbols): Adjust comment. Iterate on all separate
3138 * minsyms.c (lookup_minimal_symbol): Adjust for multiple separate
3140 (lookup_minimal_symbol_text): Ditto.
3141 (lookup_minimal_symbol_by_pc_name): Ditto.
3142 (lookup_minimal_symbol_solib_trampoline): Ditto.
3143 (lookup_minimal_symbol_by_pc_section_1): Iterate on all separate
3146 2010-01-05 Stan Shebs <stan@codesourcery.com>
3148 Add fast tracepoints.
3149 * arch-utils.h (default_fast_tracepoint_valid_at): Declare.
3150 * arch-utils.c (default_fast_tracepoint_valid_at): New function.
3151 * breakpoint.h (enum bptype): Add bp_fast_tracepoint.
3152 * breakpoint.c (tracepoint_type): New function.
3153 (ALL_TRACEPOINTS): Use it.
3154 (should_be_inserted): Ditto.
3155 (bpstat_check_location): Ditto.
3156 (print_one_breakpoint_location): Ditto.
3157 (user_settable_breakpoint): Ditto.
3158 (set_breakpoint_location_function): Ditto.
3159 (disable_breakpoints_in_shlibs): Ditto.
3160 (delete_trace_command): Ditto.
3161 (print_it_typical): Add bp_fast_tracepoint case.
3162 (bpstat_what): Ditto.
3163 (print_one_breakpoint_location): Ditto.
3164 (allocate_bp_location): Ditto.
3166 (breakpoint_re_set_one): Ditto.
3167 (disable_command): Ditto.
3168 (enable_command): Ditto.
3169 (check_fast_tracepoint_sals): New function.
3170 (break_command_really): Call it.
3171 (ftrace_command): New function.
3172 (_initialize_breakpoint): Add ftrace command.
3173 * gdbarch.sh (fast_tracepoint_valid_at): New.
3174 * gdbarch.h, gdbarch.c: Regenerate.
3175 * i386-tdep.c (i386_fast_tracepoint_valid_at): New function.
3176 (i386_gdbarch_init): Use it.
3177 * remote.c (struct remote_state): New field fast_tracepoints.
3178 (PACKET_FastTracepoints): New packet config type.
3179 (remote_fast_tracepoint_feature): New function.
3180 (remote_protocol_features): Add FastTracepoints.
3181 (remote_supports_fast_tracepoints): New function.
3182 (_initialize_remote): Add FastTracepoints.
3183 * tracepoint.c (download_tracepoint): Add fast tracepoint option.
3184 * NEWS: Mention fast tracepoints.
3186 2010-01-06 Joel Brobecker <brobecker@adacore.com>
3188 * gdb-gdb.py: New file.
3190 2010-01-05 Michael Snyder <msnyder@vmware.com>
3192 * infrun.c (handle_inferior_event): Fix typo in comment.
3194 2010-01-05 Jan Kratochvil <jan.kratochvil@redhat.com>
3196 * symfile.c (syms_from_objfile): Remove the !MAINLINE conditional.
3198 2010-01-04 Ulrich Weigand <uweigand@de.ibm.com>
3200 * features/Makefile (WHICH): Add s390-linux32, s390-linux64,
3202 (s390-linux32-expedite): Define.
3203 (s390-linux64-expedite): Define.
3204 (s390x-linux64-expedite): Define.
3205 * features/s390-acr.xml: New file.
3206 * features/s390-fpr.xml: New file.
3207 * features/s390-core32.xml: New file.
3208 * features/s390-core64.xml: New file.
3209 * features/s390x-core64.xml: New file.
3210 * features/s390-linux32.xml: New file.
3211 * features/s390-linux64.xml: New file.
3212 * features/s390x-linux64.xml: New file.
3213 * features/s390-linux32.c: New generated file.
3214 * features/s390-linux64.c: New generated file.
3215 * features/s390x-linux64.c: New generated file.
3217 * regformats/s390-linux32.dat: New generated file.
3218 * regformats/s390-linux64.dat: New generated file.
3219 * regformats/s390x-linux64.dat: New generated file.
3220 * regformats/reg-s390.dat: Remove.
3221 * regformats/reg-s390x.dat: Remove.
3223 * s390-nat.c: Include "auxv.h" and <elf.h>.
3224 (HWCAP_S390_HIGH_GPRS): Define if undefined.
3225 (s390_target_wordsize): New function.
3226 (s390_auxv_parse): Likewise.
3227 (s390_get_hwcap): Likewise.
3228 (s390_read_description): Likewise.
3229 (_initialize_s390_nat): Install s390_auxv_parse and
3230 s390_read_description.
3232 * s390-tdep.c: Include "features/s390-linux32.c",
3233 "features/s390-linux64.c", and "features/s390x-linux64.c".
3234 (struct gdbarch_tdep): Add gpr_full_regnum, pc_regnum, and cc_regnum.
3235 (s390_register_call_saved): New function.
3236 (s390_register_name): Remove.
3237 (s390_register_type): Remove.
3238 (s390_dwarf_regmap): Add lower half GPR pseudo DWARF CFI regnums.
3239 (s390_dwarf_reg_to_regnum): Remap GPR regnums to full GPRs.
3240 (s390_adjust_frame_regnum): Remap GPR regnums to lower halves for CFI.
3241 (s390_pseudo_register_name): New function.
3242 (s390_pseudo_register_type): New function.
3243 (s390_pseudo_register_read): Handle both 32-bit and 64-bit cases.
3244 Handle full GPR pesudos and varying pseudo register numbers.
3245 (s390_pseudo_register_write): Likewise
3246 (s390x_pseudo_register_read): Remove.
3247 (s390x_pseudo_register_write): Likewise.
3248 (s390_register_group): Remove.
3249 (s390_pseudo_register_group): New function.
3250 (s390_regmap_gregset): Add GPR upper halves.
3251 (s390x_regmap_gregset): Likewise.
3252 (s390_regmap_fpregset): Likewise.
3253 (s390_regmap_upper): New global variable.
3254 (s390_upper_regset): New global variable.
3255 (s390_upper_regset_sections): New global variable.
3256 (s390_regset_from_core_section): Handle GPR upper halves.
3257 (s390_core_read_description): New function.
3258 (s390_prologue_frame_unwind_cache): Set up ABI call-saved/clobbered
3259 register information. Handle varying pseudo register numbers.
3260 (s390_backchain_frame_unwind_cache): Likewise.
3261 (s390_frame_prev_register): Unwind full GPRs to show lower halves.
3262 (s390_stub_frame_unwind_cache): Handle varying pseudo register numbers.
3263 (s390_sigtramp_frame_unwind_cache): Unwind PSWM and PSWA as well as
3264 PC and CC pseudos. Unwind upper halves and full GPRs as appropriate.
3265 Handle varying pseudo register numbers.
3266 (s390_unwind_pc): Handle varying pseudo register numbers.
3267 (s390_dwarf2_prev_register): New function.
3268 (s390_dwarf2_frame_init_reg): Set up ABI call-saved/clobbered
3269 register information. Handle varying pseudo register numbers.
3270 Install s390_dwarf2_prev_register to unwind full GPRs.
3271 (s390_gdbarch_init): Handle target descriptions. Assign varying
3272 pseudo register numbers. Install s390_adjust_frame_regnum.
3273 (_initialize_s390_tdep): Initialize target descriptions.
3275 * s390-tdep.h (S390_R0_UPPER_REGNUM .. S390_R15_UPPER_REGNUM): Define.
3276 (S390_NUM_REGS): Redefine to include upper half registers.
3277 (S390_PC_REGNUM, S390_CC_REGNUM): Remove.
3278 (S390_NUM_PSEUDO_REGS, S390_NUM_TOTAL_REGS): Likewise.
3279 (tdesc_s390_linux32): Add declaration.
3280 (tdesc_s390_linux64): Likewise.
3281 (tdesc_s390x_linux64): Likewise.
3283 2010-01-04 Ulrich Weigand <uweigand@de.ibm.com>
3285 * regset.h (struct core_regset_section): Add HUMAN_NAME.
3286 * i386-linux-tdep.c (i386_linux_regset_sections): Fill in HUMAN_NAME.
3287 * ppc-linux-tdep.c (ppc_linux_vsx_regset_sections): Likewise.
3288 (ppc_linux_vmx_regset_sections): Likewise.
3289 (ppc_linux_fp_regset_sections): Likewise.
3291 * corelow.c (get_core_register_section): Constify arguments.
3292 (get_core_registers): Use gdbarch_core_regset_sections instead
3293 of hard-coded platform-specific register section names.
3295 2010-01-04 Ulrich Weigand <uweigand@de.ibm.com>
3297 * dwarf2loc.c (read_pieced_value): If a piece occupies part of
3298 a register, assume the least-significant part is used.
3299 (write_pieced_value): Likewise.
3301 2010-01-04 Ulrich Weigand <uweigand@de.ibm.com>
3303 * printcmd.c: Include "arch-utils.h".
3304 (do_one_display): Re-parse expression if current architecture changed.
3306 2010-01-03 Jan Kratochvil <jan.kratochvil@redhat.com>
3307 Joel Brobecker <brobecker@adacore.com>
3309 * gdbtypes.c (check_typedef): New comment on type length.
3310 * value.c (allocate_value_lazy): Remove the unused atype variable. New
3311 comment on type length.
3312 (value_primitive_field): Keep the original TYPE value, new comment.
3314 2010-01-01 Jan Kratochvil <jan.kratochvil@redhat.com>
3316 * cli/cli-script.c (process_next_line): Rename p1 as p_end and p2 as
3317 p_start. Change != comparisons to > and < comparisons.
3319 2010-01-01 Jan Kratochvil <jan.kratochvil@redhat.com>
3321 * cli/cli-script.c (process_next_line): Check P2 overrun.
3323 2009-01-01 Joel Brobecker <brobecker@adacore.com>
3325 Update the copyright hearder to add year 2010 for most GDB files.
3327 2009-01-01 Joel Brobecker <brobecker@adacore.com>
3329 Fix build failure in inf-ptrace.c.
3330 * inf-ptrace.c (inf_ptrace_follow_fork): Fix typo.
3332 2010-01-01 Joel Brobecker <brobecker@adacore.com>
3334 * top.c (print_gdb_version): Update copyright year.
3336 2010-01-01 Joel Brobecker <brobecker@adacore.com>
3338 Fix break *FUN'address thread NUM.
3339 * ada-lex.l (task): Expand rule to also match the thread keyword.
3341 2010-01-01 Joel Brobecker <brobecker@adacore.com>
3343 Fix break *FUN'address task NUM.
3344 * ada-lex.l (task): New rule.
3345 * ada-lang.c (valid_task_id): Make sure the Ada task list has
3346 been built before using it.
3348 For older changes see ChangeLog-2009.
3354 version-control: never