1 Thu Jul 2 10:22:00 1998 Dawn Perchik <dawn@cygnus.com>
3 * mdebugread.c (parse_partial_symbols): Go ahead and read the .mdebug
4 section, but just don't add a 2nd minimal symbol if this is an .mdebug
5 section in an ELF file.
7 1998-07-01 Jim Blandy <jimb@zwingli.cygnus.com>
9 * Makefile.in (ax-general.o): Depend on $(defs_h) too.
10 (ax_h): Bother to define this.
12 Mon Jun 29 19:01:18 1998 Jim Wilson <wilson@cygnus.com>
14 * gnu-regex.c (re_comp): Add cast to char * before gettext calls.
16 Sun Jun 28 11:35:48 1998 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
18 Improve support for SunPro F77.
19 * dbxread.c (end_psymtab, process_one_symbol): Handle minimal
20 symbols with trailing underscore names.
21 * minsyms.c (find_stab_function_addr): Ditto.
22 * dbxread.c (process_one_symbol): Ignore N_ALIAS for now.
23 * partial-stab.h (case N_ALIAS): Ditto.
24 * stabsread.c (read_sun_builtin_type): Handle boolean types.
26 Fri Jun 26 14:03:01 1998 Keith Seitz <keiths@cygnus.com>
28 * symtab.h (enum namespace): Add new namespaces FUNCTIONS_NAMESPACE,
29 TYPES_NAMESPACE, METHODS_NAMESPACE, and VARIABLES_NAMESPACE used by
31 Add prototype for search_symbols and free_search_symbols.
33 * symtab.c (list_symbols): Rewrite to use new search_symbols.
34 (file_matches): New helper function for search_symbols.
35 (free_search_symbols): New function which frees data returned from
37 (print_symbol_info): New helper function which prints info about a
38 matched symbol to stdout. Extracted from old list_symbols.
39 (print_msymbol_info): New helper function which prints info about
40 a matched msymbol to stdout. Extracted from old list_symbols.
41 (symtab_symbol_info): Extracted from old list_symbols.
42 (variables_info): Use symtab_symbol_info.
43 (functions_info): Use symtab_symbol_info.
44 (types_info): Use symtab_symbol_info.
45 (rbreak_command): Rewrite to use new search_symbols.
47 Thu Jun 25 22:38:32 1998 Frank Ch. Eigler <fche@cygnus.com>
49 * mips-tdep.c (mips_push_arguments): Use 128-bit stack frame
50 alignment for inferior calls.
52 Wed Jun 24 23:17:12 1998 Mark Alexander <marka@cygnus.com>
54 * mn10200-tdep.c (mn10200_analyze_prologue): Fix calculation
55 of jsr target address.
57 Tue Jun 23 19:37:46 1998 Mark Alexander <marka@cygnus.com>
59 * config/mn10200/tm-mn10200.h (SAVED_PC_AFTER_CALL): Don't
60 zero upper byte of address.
62 Tue Jun 23 17:32:26 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
64 * rs6000-tdep.c (pop_dummy_frame): use memcpy.
65 (push_arguments): use memset.
66 (various other places): fix up indentation and long lines.
68 Tue Jun 23 11:58:35 1998 Jason Molenda (crash@bugshack.cygnus.com)
70 * configure.in: s/lXext/-lXext/ for Jillian's change.
72 Tue Jun 23 11:14:04 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
74 * source.c (find_source_lines): fix indentation.
76 * config/mips/tm-irix5.h: Modify to work better on irix 6, by
77 making FP registers 8 bytes instead of 4.
78 REGISTER_BYTES: redefine. REGISTER_BYTE(): redefine.
79 REGISTER_VIRTUAL_TYPE: redefine. MIPS_LAST_ARG_REGNUM: redefine.
80 * irix5-nat.c (fetch_core_registers): read 8 bytes per FP register.
81 * mips-tdep.c (FP_REGISTER_DOUBLE): new macro to distinguish
82 targets with 8-byte FP registers (don't use TARGET_MIPS64).
83 (STACK_ARGSIZE): new macro, how much space is taken up on the
84 stack for each function argument (don't use TARGET_MIPS64).
85 (mips_push_arguments): modify logic to work better on Irix 6
88 Tue Jun 23 12:29:53 1998 Jillian Ye <jillian@cygnus.com>
90 * configure.in: Add -lXext to mips_extra_libs
91 * configure: Regenerated.
93 Sun Jun 21 09:31:12 1998 Ron Unrau (runrau@cygnus.com)
95 * symtab.c (find_line_pc): assumed that a PC of 0 is illegal.
96 Changed to pass PC as arg and return 1 if valid (0 otherwise).
97 symtab.h: change prototype to match
98 symtab.c (find_line_pc_range): use new interface
99 breakpoint.c (resolve_sal_pc): ditto
100 gdbtk.c (gdb_set_bp): ditto
102 Wed Jun 17 15:50:00 1998 Ron Unrau (runrau@cygnus.com)
104 * parse.c (target_map_name_to_register): Check target specific
105 aliases *first* so that it can over-ride architectural names
107 Wed Jun 17 17:13:38 1998 Said Ziouani (saidz@park-street.cygnus.com)
109 * remote-sds.c (sds_start_remote): Fix printf call.
111 Tue Jun 16 16:32:08 1998 Mark Alexander <marka@cygnus.com>
113 * mn10200-tdep.c (mn10200_analyze_prologue): Fix null pointer
114 crash when in "start".
116 Tue Jun 16 14:38:40 1998 Ron Unrau (runrau@cygnus.com)
118 * dbxread.c: reset function_start_offset after a finishing N_FUN
120 * remote-sim.c: allow TARGET_REDEFINE_DEFAULT_OPS to override
121 target vectors as needed.
123 Sun Jun 14 08:46:25 1998 Ron Unrau (runrau@cygnus.com)
125 * partial-stab.h: 'F' and 'f' type N_FUN psymbols should pass
126 CUR_SYMBOL_VALUE as CORE_ADDR instead of long
127 * buildsym.[ch]: export pending_blocks list
129 Sat Jun 13 13:02:32 1998 Dawn Perchik (dawn@cygnus.com)
131 * remote.c : Fix remote help string to match that of help.exp.
133 Fri Jun 12 14:22:55 1998 Jason Molenda (crash@bugshack.cygnus.com)
135 * configure.in (LIBS): Add -lw to the list of libraries if needed.
137 Thu Jun 11 15:05:10 1998 Jason Molenda (crash@bugshack.cygnus.com)
140 * configure.in: Don't see if we need to replace btowc().
141 * Makefile.in: Don't include LIBOBJS.
142 * configure: Regenerated.
143 * gnu-regex.c (regex_compile): Only support i18n [:foo:] if
146 Wed Jun 10 15:39:14 1998 Stu Grossman <grossman@babylon-5.cygnus.com>
148 * c-exp.y: Fix problems with parsing "'foo.bar'::func". Some languages
149 allow symbols with dots.
151 * gdbtypes.c (check_stub_method): Cosmetic. Use more descriptive
152 names for parameters.
155 * jv-exp.y: Parser now accepts primitive types.
156 * (parse_number): Use correct ifdef for scanf long double support.
157 * jv-lang.c (java_array_type): Initial cut at array support.
160 * language.c language.h (set_language): Now returns previous language.
162 * symtab.c (find_methods): Make static. Cosmetic changes, including
163 indentation, and adding descriptive comments. Move local variable defs
164 into the block they are used in.
165 * Don't call check_stub_method any more. Use gdb_mangle_name to
166 generate the full method name. find_method doesn't need all the other
167 goobldegook that check_stub_method does.
168 * (gdb_mangle_name): Use more descriptive names for parameters. Fix
171 * (lookup_partial_symbol lookup_block_symbol): Check for java to
172 ensure we can find mangled names.
174 * (decode_line_1): Move local variable defs into the block they are
175 used in. (Improves code readability.)
177 Wed Jun 10 18:04:35 1998 Frank Ch. Eigler <fche@cygnus.com>
179 * gdbtypes.c (get_discrete_bounds): Assign unsigned type flag for
181 (create_set_type): Ditto for all-positive set values.
182 * values.c (unpack_field_as_long): Check for typedef in struct
185 Wed Jun 10 14:06:05 1998 Jason Molenda (crash@bugshack.cygnus.com)
187 * configure.in: Add some tests for gnu-regex.c's benefit.
188 See if btowc() function is provided in C library.
189 * configure, config.in: Regenerated.
190 * Makefile.in (CLIBS, CDEPS): Add @LIBOBJS@ to build btowc.c
194 * gnu-regex.c: Reorder wchar.h and wctype.h includes for Solaris'
196 Drop namespace preserving defines for now.
198 Wed Jun 10 11:53:42 1998 Jason Molenda (crash@bugshack.cygnus.com)
200 * gnu-regex.c: Include "gnu-regex.h", not "regex.h".
202 Wed Jun 10 11:34:07 1998 Jason Molenda (crash@bugshack.cygnus.com)
204 * gnu-regex.c, gnu-regex.h: Change LGPL license to GPL license
205 to stay consistent with the rest of GDB.
207 Wed Jun 10 11:27:39 1998 Jason Molenda (crash@bugshack.cygnus.com)
209 * gnu-regex.c, gnu-regex.h: Update to current FSF (glibc) versions.
211 Wed Jun 10 10:58:18 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
213 * printcmd.c (disassemble_command): move overlay mapping code
214 "up" into find_pc_partial_function.
215 * blockframe.c (find_pc_partial_function): adjust start address
216 and end address for overlays (mapped vs. unmapped addresses),
217 so that all callers of this function may benefit.
218 * m32r-tdep.c (m32r_skip_prologue): adjust indentation.
220 Mon Jun 8 16:08:10 1998 Ron Unrau <runrau@cygnus.com>
222 * objfiles.c (add_to_objfile_sections): All targets to define
223 TARGET_KEEP_SECTION to permit them to retain bfd sections that
224 GDB would otherwise have discarded.
226 Fri Jun 5 13:56:19 1998 Doug Evans <devans@canuck.cygnus.com>
228 * dbxread.c (read_dbx_symtab): Don't lower texthigh for last psymtab.
230 Thu Jun 4 18:35:04 1998 Stan Shebs <shebs@andros.cygnus.com>
232 * remote.c (init_extended_remote_ops): Make extended_remote_ops
233 by copying from remote_ops, move it and init_remote_ops to
234 usual place at end of file, remove "void" from arg lists.
236 Thu Jun 4 17:51:06 1998 Mark Alexander <marka@cygnus.com>
238 * sparc-tdep.c (sparc_fix_call_dummy): Byte-swap the call dummy
239 on bi-endian machines.
240 (sparc_extract_return_value): Handle values smaller than int on
241 machines with little-endian data.
242 (sparc_target_architecture_hook): Set bi_endian flag.
244 Thu Jun 4 12:14:48 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
246 * printcmd.c (disassemble_command): Fix off-by-one error for
247 disassembling functions in unmapped overlay sections.
249 Thu Jun 4 10:15:03 1998 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
253 - Jim Blandy <jimb@zwingli.cygnus.com>
254 (print_packet, remote_packet_command): New functions.
255 (_initialize_remote): Register the remote-packet command.
256 - David Taylor <taylor@texas.cygnus.com>
257 (_initialize_remote): remote-compare is now
259 - Elena Zannoni <ezannoni@kwikemart.cygnus.com>
260 (remote_compare_command): added warning, issued in case
263 Thu Jun 4 08:25:38 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
265 * remote.c (remote_compare_command): New function, new command.
266 Compare object file binary image with corresponding memory on
267 remote target. Report differences.
269 Tue Jun 2 19:05:04 1998 Mark Alexander <marka@cygnus.com>
271 * sparc-tdep.c (sparc_target_architecture_hook): Set target
272 byte order only when it's selectable.
274 Tue Jun 2 02:01:56 1998 Mark Alexander <marka@cygnus.com>
276 * sparc-tdep.c (sparc_target_architecture_hook): New function to
277 set endianness based on machine type.
278 (_initialize_sparc_tdep): Initialize target_architecture_hook.
279 (sparc_print_register_hook): Print PSR and FPSR in fancy format
281 * config/sparc/tm-sparc.h (PRINT_REGISTER_HOOK): Redefine to
282 call sparc_print_register_hook instead of using inline code.
283 * config/sparc/tm-sp64.h (PRINT_REGISTER_HOOK): Remove.
285 Thu May 28 17:19:14 1998 Keith Seitz <keiths@cygnus.com>
287 * main.c (main): Check for NULL from getenv on CYGWIN32.
289 Thu May 28 09:41:44 1998 Nick Clifton <nickc@cygnus.com>
291 * monitor.c (monitor_vsprintf): Handle %%. Patch courtesy of
292 Felix Lee (flee@cygnus.com)
294 Thu May 28 00:27:35 1998 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
296 * mips-tdep.c (mips_push_dummy_frame): Fix calculation of
297 PROC_REG_OFFSET and PROC_FREG_OFFSET.
299 Mon Apr 27 14:37:49 1998 Andrew Cagney <cagney@b1.cygnus.com>
301 * config/v850/tm-v850.h (REGISTER_BYTE): FP_REGNUM and
302 FP_RAW_REGNUM use the same register location.
304 * v850-tdep.c (v850_scan_prologue): Use FP_RAW_REGNUM instead of
306 (v850_frame_chain): Ditto.
308 * config/v850/tm-v850.h (REGISTER_NAMES): Add "fp".
311 (FP_RAW_REGNUM): Define.
313 Wed May 27 14:22:31 1998 Keith Seitz <keiths@cygnus.com>
315 * main.c (main): Convert the path returned from getenv to a posix
316 path on cygwin32 hosts.
318 Mon May 25 13:31:27 1998 Keith Seitz <keiths@cygnus.com>
320 * remote.c (remote_open_1): If an error occurs starting the remote,
321 pop the target AND return.
323 Sat May 23 02:23:09 1998 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
325 * dwarf2read.c (read_subroutine_type): Set TYPE_FLAG_PROTOTYPED
327 * valops.c (value_arg_coerce): Add new argument to indicate whether
328 the function has a prototype, handle integer and float promotions
330 (call_function_by_hand): Always call value_arg_coerce, pass down
331 prototype information.
333 Fri May 22 10:56:36 1998 John Metzler <jmetzler@cygnus.com>
335 * remote.c (_initialize_remote): Typo extended__remote
337 Thu May 21 13:14:25 1998 John Metzler <jmetzler@cygnus.com>
339 * gnu-nat.c (init_gnu_ops): Initialization of target ops by assignment.
340 (_initialize_gnu_nat): Call new init
341 * mac-nat.c (init_child_ops): Ditto.
342 (_initialize_mac_nat): Ditto.
343 * monitor.c (init_base_monitor_ops): Ditto.
344 (_initialize_remote_monitors): Ditto.
345 * ppc-bdm.c (init_bdm_ppc_ops): Ditto.
346 (_initialize_bdm_ppc): Ditto.
347 * remote-adapt.c (init_adapt_ops): Ditto.
348 (_initialize_remote_adapt): Ditto.
349 * remote-array.c (init_array_ops): Ditto.
350 (_initialize_array): Ditto.
351 * remote-bug (init_bug_ops): Ditto.
352 (_initialize_remote_bug): Ditto.
353 * remote-e7000.c (init_e7000_ops): Ditto.
354 (_initialize_remote_e7000): Ditto.
355 * remote-eb.c (init_eb_ops): Ditto.
356 (_initialize_remote_eb): Ditto.
357 * remote-es.c (init_es1800_ops): Ditto.
358 (init_es1800_child_ops): Ditto.
359 (_initialize_es1800): Ditto.
360 * remote-hms.c (init_hms_ops): Ditto.
361 (_initialize_remote_hms): Ditto.
362 * remote-mm.c (init_mm_ops): Ditto.
363 (_initialize_remote_mm): Ditto.
364 * remote-nindy.c (init_nindy_ops): Ditto.
365 (_initialize_nindy): Ditto.
366 * remote_nrom.c (init_nrom_ops): Ditto.
367 (_initialize_remote_nrom): Ditto.
368 * remote-os9k (init_rombug_ops): Ditto.
369 (_initialize_remote_os9k): Ditto.
370 * remote-rdi.c (init_rdi_ops): Ditto.
371 (_initialize_remote_rdi): Ditto.
372 * remote-rdp.c (init_remote_rdp_ops): Ditto.
373 (_initialize_remote_rdp): Ditto.
374 * remote-sds.c (init_sds_ops): Ditto.
375 (_initialize_remote_sds): Ditto.
376 * remote-sim.c (init_gdbsim_ops): Ditto.
377 (_initialize_remote_sim): Ditto.
378 * remote-st.c (init_st2000_ops): Ditto.
379 (_initialize_remote_st2000): Ditto.
380 * remote-udi.c (init_udi_ops): Ditto.
381 (_initialize_remote_udi): Ditto.
382 * remote-vx.c (init_vx_ops): Ditto.
383 (init_vx_run_ops): Ditto.
384 (_initialize_vx): Ditto.
385 * remote.c (init_remote_ops): Ditto.
386 (init_extended_remote_ops): Ditto.
387 (_initialize_remote): Ditto.
388 * sparcl-tdep.c (init_sparclite_ops): Ditto.
389 (_initialize_sparcl_tdep): Ditto.
390 * v850ice.c (init_850ice_ops): Ditto.
391 (_initialize_v850ice): Ditto.
392 * win32-nat.c: (init_child_ops): Ditto.
393 (_initialize_inftarg): Ditto.
395 1998-05-21 Jim Blandy <jimb@zwingli.cygnus.com>
397 * ax-gdb.c (const_var_ref): Don't handle function names. I don't
398 want to implement all the "usual unary conversion" rules for
400 (gen_usual_unary): Turn "function" values into "pointer to
401 function" values, in accordance with ANSI.
402 (gen_deref): Don't do the usual unary conversions here. Let the
403 caller do it. Note that dereferencing a function pointer yields
404 a function designator, which we call an rvalue, not an lvalue.
405 (gen_address_of): Handle functions specially.
406 (gen_struct_ref): Perform the usual unary conversions before
408 (gen_expr): In case for the prefix '*' operator, call
409 gen_usual_unary manually.
411 Wed May 20 15:29:41 1998 Gavin Koch <gavin@cygnus.com>
413 * mips/tm-tx39.h (MIPS_DEFAULT_FPU_TYPE): Defined as MIPS_FPU_NONE.
414 * mips/tm-tx39l.h: Same.
416 Wed May 20 10:12:11 1998 John Metzler <jmetzler@cygnus.com>
418 * m32r-tdep.c: (decode_prologue): Handle frames compiled with -Os.
419 Split out as separate function called by skip prologue and scan
420 prologue. new formula handles optimization in which the prologue
421 is interleaved with the body of the function. Also recognizes new
422 variations of prologue encoding. Use of frame pointer is
423 essential to debugging, -fno-omit-frame-pointer
424 (m32r_skip_prologue): Call decode prologue, ignore line info
425 (m32r_scan_prologue): Call decode prologue, ignore line info.
427 Tue May 19 17:23:54 1998 John Metzler <jmetzler@cygnus.com>
429 * w89k-rom.c (_initialize_w89k): Call new init function
430 (init_w89k_cmds): Convert to dynamic initialization of monitor_ops
431 data structure for forward compatability with additions to the
433 * dbug-rom.c (_initialize_dbug_rom): ditto
434 (init_dbug_cmds): ditto
435 * m32r-rom.c (_initialize_m32r_rom): ditto
436 (init_m32r_cmds): ditto
438 Tue May 19 14:54:11 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
440 * tracepoint.c (memrange_cmp): use const void * args to avoid
441 ANSI compiler warnings.
443 1998-05-19 Jim Blandy <jimb@zwingli.cygnus.com>
445 * ax-gdb.c (gen_fetch, gen_var_ref, gen_deref, find_field,
446 gen_bitfield_ref, gen_expr): Call error, not abort.
447 * ax-general.c (read_const, generic_ext, ax_trace_quick,
448 ax_label, ax_const_d, ax_reg, ax_print): Same.
450 * tracepoint.c: Remove the $(...) syntax for memranges.
451 (validate_actionline, encode_actions, trace_dump_command): Remove
452 clauses for the $(...) syntax.
453 (parse_and_eval_memrange): Function deleted.
454 (_initialize_tracepoint): Update function description.
456 * gdbtk.c (struct wrapped_call_objs): Change the `func' member to
457 be a Tcl_ObjCmdProc, not an Tcl_CmdProc, since it accepts a vector
458 of objects as arguments. Change the object vector to be const,
459 since that's what all the users of this structure seem to expect.
460 (call_obj_wrapper): Cast clientData properly before storing it in
461 the wrapped_args structure.
463 * ax-gdb.c (_initialize_ax_gdb): Make the "agent" command a
464 subcommand of "maintenance", as it should have been from the
465 beginning. #include "gdbcmd.h", to get the declaration for
467 * Makefile.in: Document that dependency.
469 Tue May 19 12:00:58 1998 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
471 * tracepoint.c (get_tracepoint_by_number): new function, to access
472 traceframe_number for use of the GUI.
474 * tracepoint.h: added prototype for get_traceframe_number.
476 Mon May 18 13:34:27 1998 Keith Seitz <keiths@cygnus.com>
478 * dbxread.c (process_one_symbol): If block addresses are relative to
479 function start addresses, reset function_start_address whenever a new
482 Mon May 18 13:04:27 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
484 * tracepoint.c (get_tracepoint_by_number): make sure to advance
485 arg pointer even if we fail to parse a useful number. Otherwise,
486 since this function is called in a loop, it may loop forever!
487 Also change strtol call to allow arbitrary radix.
488 (map_args_over_tracepoints (and other places)): add QUIT; call
489 to loop, to allow breakout using control-C. Not all loops were
490 analyzed to make sure they could terminate cleanly, but even
491 terminating with a messed-up tracepoint list would be better
492 than not terminating at all!
493 (tdump_command): check to see if we're connected to a trace-
494 capable target (currently only "remote") before doing anything
498 Sat May 16 22:21:48 1998 Frank Ch. Eigler <fche@cygnus.com>
500 * config/d30v/tm-d30v.h (INIT_FRAME_PC_FIRST): Fill in PC into
501 frame struct before extracting saved register offsets.
504 Fri May 15 22:47:45 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
506 * tracepoint.c (encode_actions): fix typo in printf format string.
508 1998-05-15 Jim Blandy <jimb@zwingli.cygnus.com>
510 Implement a few more tracing operators: ^ | & ~ !
511 * ax-gdb.c (gen_integral_promotions, gen_logical_not,
512 gen_complement): New functions.
513 (gen_binop): New argument MAY_CARRY, indicating whether we need to
514 correct the upper bits of the value after performing the
515 operation. Callers changed.
516 (gen_expr): Handle BINOP_BITWISE_AND, BINOP_BITWISE_IOR, and
517 BINOP_BITWISE_XOR here as well, by calling gen_binop. Handle
518 UNOP_LOGICAL_NOT, UNOP_COMPLEMENT.
520 * ax-gdb.c (gen_conversion): Reworked to avoid some unnecessary
523 * ax-gdb.c (gen_usual_arithmetic): Renamed from gen_usual_binary,
524 to match the ANSI C standard better. Callers changed.
526 * ax-gdb.c (gen_traced_pop): Add prototyped declaration.
528 Fri May 15 18:18:38 1998 David Taylor <taylor@texas.cygnus.com>
530 * tracepoint.c (stringify_collections_list): return a collection
531 of strings rather than a single string.
532 (free_actions_list): new function.
533 (encode_actions): process collection of strings returned by
534 stringify_collections_list.
536 1998-05-15 Jim Blandy <jimb@zwingli.cygnus.com>
538 * ax-gdb.c (gen_traced_pop): New function.
539 (gen_expr): Call it for comma operator.
540 (gen_trace_for_expr): Call it, instead of writing it out.
542 Add facilities for sending arbitrary packets to the remote agent.
543 There are a bunch of improvements to make (make it generic; handle
544 'O' replies properly), but I just want to get this onto the branch.
545 * remote.c (print_packet, remote_packet_command): New functions.
546 (_initialize_remote): Register the remote-packet command.
548 Thu May 14 17:52:31 1998 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
550 * tracepoint.c: move actionline_type definition to tracepoint.h.
551 (validate_actionline): make non static.
553 * tracepoint.h: move actioline_type definition from tracepoint.c.
554 (validate_actionline) moved prototype from tracepoint.c.
556 Thu May 14 11:49:18 1998 David Taylor <taylor@texas.cygnus.com>
558 * tracepoint.c (validate_actionline): add additional error
559 checking, remove some dead code.
560 (encode_actions): additional cleanups.
561 (trace_find_command): remove some dead code.
562 (trace_find_pc_command): ditto.
563 (trace_find_tracepoint_command): ditto.
564 (trace_find_line_command): ditto.
565 (trace_find_range_command): ditto.
566 (trace_find_outside_command): ditto.
568 Thu May 14 5:51:00 1998 Ron Unrau <runrau@cygnus.com>
570 * symtab.c (decode_line_1): set section for "break *<addr>"
572 Wed May 13 20:58:02 1998 Mark Alexander <marka@cygnus.com>
574 * corefile.c (reopen_exec_file): Reopen the exec file if
577 Wed May 13 15:22:02 1998 Mark Alexander <marka@cygnus.com>
579 * sparc-tdep.c (fetch_instruction): New function.
580 (single_step, sparc_init_extra_frame_info, examine_prologue):
581 Use fetch_instruction instead of read_memory_integer
582 to ensure that instructions are always read as big-endian.
584 Wed May 13 14:42:21 1998 Ian Lance Taylor <ian@cygnus.com>
586 * configure.in: Add AC_FUNC_ALLOCA.
587 * defs.h: Check HAVE_ALLOCA_H rather than sparc. Add _AIX pragma
589 * configure: Rebuild.
591 * Makefile.in (jv-lang.o, jv-typeprint.o, jv-valprint.o): New
595 Wed May 13 11:19:08 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
597 * tracepoint.c (trace_command): Remove old diagnostic code that was
598 preventing tracepoints from being defined with a full-path filename.
600 Tue May 12 13:17:35 1998 Frank Ch. Eigler <fche@cygnus.com>
602 * stabsread.c (read_one_struct_field): Check for typedef in type
603 tree before clearing bitfield information.
605 1998-05-11 Jim Blandy <jimb@zwingli.cygnus.com>
607 * ax-gdb.c (gen_binop): New function, based on gen_mul, to replace
608 gen_mul and gen_div, and handle `%' op as well. Correctly tests
610 (gen_expr): Factor out common code in binary arithmetic operators.
612 (gen_mul, gen_div): Removed.
614 Thu May 7 14:49:38 1998 Bob Manson <manson@charmed.cygnus.com>
616 * config/sparc/tm-sp64.h (CALL_DUMMY): Store and retrieve
617 %o0-%o5 as 64-bit values; compensate for stack bias.
618 (USE_STRUCT_CONVENTION): We only pass pointers to structs
619 if they're larger than 32 bytes.
620 (REG_STRUCT_HAS_ADDR): Ditto.
622 * sparc-tdep.c (sparc_init_extra_frame_info): Use read_sp()
623 instead of read_register. If the target is a sparc64 and the frame
624 pointer is odd, compensate for the stack bias.
625 (get_saved_register): Use read_sp().
626 (DUMMY_STACK_REG_BUF_SIZE): Use FP_REGISTER_BYTES.
627 (sparc_push_dummy_frame): Use read_sp()/write_sp(). On sparc64,
628 save the PC, NPC, CCR, FSR, FPRS, Y and ASI registers.
629 (sparc_frame_find_saved_regs): Use read_sp(). Read the PC, NPC,
630 CCR, FSR, FPRS, Y and ASI registers from the frame, if it's a
632 (sparc_pop_frame): Use write_sp(). If the target is a sparc64 and
633 the FP is odd, compensate for stack bias.
634 (sparc_store_return_value): Right-justify the return value before
636 (sparc_fix_call_dummy): Don't NOP out part of the call dummy on
638 (sparc64_read_sp, sparc64_read_fp, sparc64_write_sp,
639 sparc64_write_fp, sp64_push_arguments,
640 sparc64_extract_return_value): New functions to support the
643 * dwarfread.c (handle_producer): Set processing_gcc_compilation to
644 the right version number.
646 * dwarf2read.c (read_file_scope): Assume we're processing
649 Wed May 6 16:34:03 1998 Jeffrey A Law (law@cygnus.com)
651 * somsolib.c: Include gdb_stat.h.
653 Mon May 4 18:34:01 1998 David Taylor <taylor@texas.cygnus.com>
655 * ax-gdb.c (gen_mul): new function; (gen_div): new function;
656 (gen_expr): add support for * and / operators, call gen_mul and
657 gen_div as appropriate.
659 Mon May 4 16:24:22 1998 Mark Alexander <marka@cygnus.com>
661 * defs.h (make_run_cleanup): Declare.
662 * solib.c (find_solib): Pass correct number of arguments to
665 Mon May 4 07:08:25 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
667 * tracepoint.c (trace_actions_command): actions command must set
668 step_count to zero (in case previous actions have set it but the
671 Sat May 2 09:35:07 1998 Stu Grossman <grossman@babylon-5.cygnus.com>
673 * ocd.h: Add new flags, function codes, and processor types to support
674 new Wiggler capabilities.
675 * (ocd_write_bytes_size): New function to allow atomic writes of
676 memory in sizes larger than a byte.
678 * ser-unix.c (baudtab): Add 57600, 115200, 230400, and 460800 baud.
680 Fri May 1 19:51:32 1998 Frank Ch. Eigler <fche@cygnus.com>
682 * stabsread.c (read_one_struct_field): Do not override supplied
683 bitfield size for a range type value.
685 * gdbtypes.c (create_range_type): For a range with positive
686 lower limit, declare range type as unsigned.
688 Fri May 1 10:58:34 1998 John Metzler <jmetzler@cygnus.com>
690 * monitor.c: Turn off debug
692 Fri May 1 09:29:56 1998 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
694 * breakpoint.c (delete_command): Skip internal breakpoints when
695 all breakpoints are requested.
697 * stabsread.c (define_symbol): Record parameter types from Sunpro
698 function stabs in the TYPE_FIELDS of the function type.
700 Thu Apr 30 15:59:54 1998 Jason Molenda (crash@bugshack.cygnus.com)
702 * Makefile.in (config-check-targets, config-check-hosts): Removed.
704 1998-04-30 Paul Eggert <eggert@twinsun.com>
706 * Makefile.in (maintainer-clean):
707 Don't get ahead of yourself and delete Makefile
708 before running `make'.
709 (local-maintainer-clean, do-maintainer-clean): New rules.
711 Wed Apr 29 14:02:59 1998 David Taylor <taylor@texas.cygnus.com>
713 * ax-gdb.c (gen_add): when adding a pointer and an int, use
714 the size of the pointer, not the int (typo) to decide how
715 to extend the result.
717 Wed Apr 29 10:20:40 1998 John Metzler <jmetzler@cygnus.com>
718 start-sanitize-vr4111
720 * nec4102rom.c: New file implements ROM monitor adapter for
721 nec-vr4102 board. This board hosts the vr4111 chip. This file
722 required extensions to the monitor_ops structure, hooks for wait
723 filter, new flags. This version does not support more than one
724 breakpoint and resuming after a breakpoint in 16 bit mode is
725 completely disfunctional.
728 * monitor.h: Defined additional hooks for dmpregs, configure_hooks
729 and wait_filter. These additions require that all ROM monitor
730 interfaces be recoded to initialize monitor ops using assignments
731 rather than static structure initialization. Added new bits to
732 flags MO_EXACT_DUMPADDR, MO_HAS_BLOCKWRITES.
734 * monitor.c (RDEBUG): Conditional tracing throughout the file.
735 (fromhex): Now recognized upper cse hex digits
736 (monitor_printf_noecho):
737 (monitor_readchar): Tracing interferes with input timing.
738 (monitor_open): Register different memory write functions with
739 dcache_init if MO_HAS_BLOCKWRITES.
740 (flush_monior_dcache): Added as an additional utilty.
741 (monitor-resume): Call continue hook if one has been supplied.
742 (monitor_wait_filter): New function Factored out of monitor wait
743 and used if alternate wait-filter has not been provided.
744 (monitor_wait): call alternate wait filter if provided. Call
745 monitor_dump_regs, a new function factored out from inline code.
746 (monitor_dump_block): A new function used as a utility when
747 monitors must dump several blocks of registers using different
749 (monitor_dump_regs): Call alternate function if provided. Uses new
751 (monitor_write_memory): Engage previouly added hook
753 (monitor_write_even_block): new function supports writing long
754 blocks of 4byte words.
755 (longlongendswap): new internal function
756 (monitor_write_memory_longlongs): new function writes large blocks
757 using command to enter a long long.
758 (monitor_write-memory_block): new Function figures out which block
760 (monitor_read_memory): Can now handle dump formats in which the bytes
761 preceeding the requested data is not printed.
763 Tue Apr 28 19:41:33 1998 Tom Tromey <tromey@cygnus.com>
765 * Makefile.in (GDBTKLIBS): New macro.
766 (INSTALLED_LIBS): Include GDBTKLIBS.
768 * configure: Rebuilt.
769 * configure.in: Put Tcl/Tk libs into GDBTKLIBS, not LIBS.
770 (GDBTKLIBS): AC_SUBST.
772 * tracepoint.c (memrange_cmp): Another typo fix; `memrbnge' ->
775 * tracepoint.c (memrange_cmp): Fixed typo in function intro.
777 Tue Apr 28 17:41:20 1998 Philippe De Muyter <phdm@macqel.be>
779 * symfile.c (overlay_auto_command): Add forgotten parameter definitions.
780 (overlay_manual_command, overlay_off_command): Likewise.
781 (overlay_load_command): Likewise.
782 * tracepoint.c (memrange_cmp): Parameters have type void *, not
785 Tue Apr 28 11:08:25 1998 John Metzler <jmetzler@cygnus.com>
787 * rom68k-rom.c (_initialize_rom68k): Fix unresolved init_rom_68kcmds.
789 Mon Apr 27 14:32:21 1998 Mark Alexander <marka@cygnus.com>
791 * config/sparc/tm-sparc.h (CALL_DUMMY): Shorten it drastically,
792 make it work on the simulator.
793 (FIX_CALL_DUMMY): Convert to function call instead of inline code.
794 (sparc_fix_call_dummy): Declare.
795 * sparc-tdep.c (sparc_fix_call_dummy): New function, taken from
796 old FIX_CALL_DUMMY macro, with additional fixes for simulator.
797 (sparc_push_dummy_frame): Set registers differently on simulator
798 to prevent corrupted register window save areas.
800 Mon Apr 27 13:46:40 1998 John Metzler <jmetzler@cygnus.com>
802 * rom68k-rom.c (_initialize_rom68k, init_rom68k_cmds):
803 Convert all static initializations of monitor ops structures to
804 executable initializations in order that additions to the data
805 structure definition can me made without repeating this editing
807 * abug-rom.c (_initialize_abug_rom, init_abug-cmds): Ditto.
808 * cpu32bug-rom.c (_initialize_cpu32bug_rom, init_cpu32bug_cmds): Ditto.
809 * mon960-rom.c (initialize_mon960, init_mon960_cmds): Ditto.
810 * op50-rom.c (initialize_op50n, init_op50n_cmds): Ditto.
811 * ppcbug-rom.c (_initialize_ppcbug_rom, init_ppc_cmds): Ditto.
812 * sh3-rom.c (_initialize_sh3_rom, init_sh3_cmds): Ditto.
813 * sparclet-rom.c (_initialize_sparclet, init_sparclet_cmds): Ditto.
814 * remote-est.c (_initialize_est, init_est_cmds): Ditto.
815 * remote-hms.c ( _initialize_remote_hms, init_hms_cmds): Ditto.
817 Mon Apr 27 10:43:04 1998 Jason Molenda (crash@bugshack.cygnus.com)
819 * gdb_string.h (strdup): Don't specify arguments in prototype.
821 Sun Apr 26 07:57:21 1998 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
823 * rs6000-nat.c (vmap_ldinfo): Issue warning instead of error if
824 fstat on ldinfo_fd fails. Use objfile->obfd instead of vp->bfd
825 to check for reference to the same file.
827 * target.c (target_read_string): Handle string transfers at the
828 end of a memory section gracefully.
830 Fri Apr 24 17:18:56 1998 Geoffrey Noer <noer@cygnus.com>
832 * Makefile.in: enable EXEEXT setting
834 Fri Apr 24 11:53:49 1998 David Taylor <taylor@texas.cygnus.com>
836 * tracepoint.c (add_local_symbols): change type of type from
837 char to int so that type shows up as 'A' or 'L' not 0.
840 Fri Apr 24 11:25:07 1998 Jeffrey A Law (law@cygnus.com)
842 * mips-tdep.c (mips32_decode_reg_save): Handle 128bit wide
843 GPR loads/stores generated on the r5900.
844 (mips_find_saved_regs, mips32_skip_prologue): Likewise.
845 * mips/tm-r5900.h (R5900_128BIT_GPR_HACK): Define.
846 * mips/tm-txvu.h (R5900_128BIT_GPR_HACK): Likewise.
849 Thu Apr 23 16:37:20 1998 Jason Molenda (crash@bugshack.cygnus.com)
851 * README: Minor changes for 4.17 release.
854 Thu Apr 23 15:44:39 1998 Per Bothner <bothner@cygnus.com>
856 * symfile.c (deduce_language_from_filename): .class implies java.
859 Thu Apr 23 12:52:21 1998 Philippe De Muyter <phdm@macqel.be>
861 * configure.in (strerror): Check if function must be declared.
862 * acconfig.h (NEED_DECLARATION_STRERROR): New define slot.
863 * gdb_string.h (strerror): Function declaration issued if
864 NEED_DECLARATION_STRERROR.
865 * configure, config.in : Files regenerated.
867 Thu Apr 23 12:27:43 1998 Philippe De Muyter <phdm@macqel.be>
869 * symfile.c (simple_overlay_update_1): Do not prefix array address
871 * bcache.h (BCACHE_DATA_ALIGNMENT): Ditto.
872 * tracepoint.c (encode_actions): Ditto.
873 * language.c, complaints.c, utils.c (varargs.h): Do not include that
874 file here, it is already included indirectly by defs.h.
875 * dbxread.c (dbx_symfile_init, process_one_symbol): Cast xmalloc return
876 value to the appropriate pointer type.
877 * utils.c (floatformat_from_doublest): Ditto.
878 * tracepoint.c (read_actions, _initialize_tracepoint): Ditto.
879 (add_memrange): Likewise with xrealloc return value.
880 * stabsread.c (ref_add): Ditto.
881 * coffread.c (coff_symfile_init): Likewise for xmmalloc return value.
882 * elfread.c (elf_symfile_read): Ditto.
883 * os9kread.c (os9k_symfile_init): Ditto.
885 Thu Apr 23 00:32:08 1998 Tom Tromey <tromey@cygnus.com>
887 * config.in: Rebuilt.
888 * acconfig.h (ENABLE_NLS, HAVE_CATGETS, HAVE_STPCPY, HAVE_GETTEXT,
889 HAVE_LC_MESSAGES): Define.
891 Wed Apr 22 15:38:56 1998 Tom Tromey <tromey@cygnus.com>
893 * configure: Rebuilt.
894 * configure.in: Call CY_GNU_GETTEXT.
895 * Makefile.in (top_builddir): New macro.
896 (INTL): Define to @INTLLIBS@.
897 (INTL_DEPS): New macro.
898 (CDEPS): Reference INTL_DEPS, not INTL.
901 Wed Apr 22 13:40:16 1998 Doug Evans <devans@canuck.cygnus.com>
903 * txvu-tdep.c (txvu_print_insn): Fix thinko.
906 Wed Apr 22 12:58:23 1998 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
908 Handle missing shared libraries during the examination of a core
910 * solib.c (find_solib): Use catch_errors around call to
911 solib_map_sections. Use warning instead of error if reading of
912 the shared library name fails.
913 (solib_map_sections): Change return and argument types to make
914 it callable from catch_errors.
915 (symbol_add_stub): Avoid GDB core dump if solib->abfd is NULL.
916 * irix5-nat.c, osfsolib.c (xfer_link_map_member, solib_map_sections,
917 symbol_add_stub): Ditto.
919 Wed Apr 22 14:34:49 1998 Michael Meissner <meissner@cygnus.com>
921 * Makefile.in (INTL*): Add support to link in the intl library,
922 and to add -I options to its source and object directories.
923 (INTERNAL_CFLAGS): Ditto.
924 (C{LIBS,DEPS}): Ditto.
927 Wed Tue 21 17:29:48 1998 Jim Lemke <jlemke@cygnus.com>
928 * configure.in: Add configure option --with-sim-funit.
931 Tue Apr 21 11:20:54 1998 Frank Ch. Eigler <fche@cygnus.com>
933 * mips-tdep.c (gdb_print_insn_mips): Disassemble MIPS instructions
934 with subtarget-specific `mach', rather than fixed default.
935 * config/mips/tm-mips.h (TM_PRINT_INSN_MACH): New macro, default
938 * config/mips/tm-r5900.h (TM_PRINT_INSN_MACH): Override.
941 * config/mips/tm-txvu.h (TM_PRINT_INSN_MACH): Override.
944 Mon Apr 20 15:35:03 1998 Philippe De Muyter <phdm@macqel.be>
946 * coffread.c (decode_base_type): Treat a long field with size greater
947 than TARGET_LONG_BIT as long long.
948 * values.c (value_from_longest): Print code value in error message.
950 Mon Apr 20 15:32:21 1998 Mark Kettenis <kettenis@phys.uva.nl>
952 * gdb/gdb_string.h (strdup): Declare only if not defined as a
955 Mon Apr 20 14:18:45 1998 J. Kean Johnston <jkj@sco.com>
957 * procfs.c: Added replacement macros for LWP stuff. Fixed support
958 for UnixWare / SVR4.2MP targets and any targets which use
959 multi-file /proc entries. Fixed support for hardware watchpoints.
960 * solib.c: SCO needs some of the same code as SunOS. Change
961 preprocessor conditionals.
963 * config/i386/i386sco5.mt: New file.
964 * config/i386/tm-i386sco5.h: New file.
965 * config/i386/i386sco5.mh (NATDEPFILES): add i386v-nat.o.
966 * config/i386/nm-i386v42mp.h
967 (TARGET_HAS_HARDWARE_WATCHPOINTS): define.
968 Add other macros for hardware assisted watchpoints.
969 * config/i386/nm-i386sco5.h: Correct attributions.
970 (TARGET_HAS_HARDWARE_WATCHPOINTS): define.
971 * config/i386/nm-linux.h (target_remote_watchpoint): Pass
972 'type' through to i386_insert_watchpoint.
974 Mon Apr 20 14:12:30 1998 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
976 * infrun.c (wait_for_inferior): Don't add signalled processes
978 * procfs.c (wait_fd): Note if LWP has exited.
979 (procfs_wait): use GETPID to get process ID.
981 Sat Apr 18 15:21:04 1998 Stan Cox <scox@cygnus.com>
983 * configure.tgt: Added sparc86x support.
985 Thu Apr 16 13:13:24 1998 Jason Molenda (crash@bugshack.cygnus.com)
987 * rdi-share/etherdrv.c (EthernetWrite): Use strerror to get
988 error string if in an ANSI C-ish environment.
990 Wed Apr 15 18:59:48 1998 Mark Alexander <marka@cygnus.com>
992 * sparc-tdep.c (SPARC_HAS_FPU): Define.
993 (sparc_extract_return_value): New function, required to handle
994 machines without floating point.
995 (sparc_store_return_value): Ditto.
996 * config/sparc/tm-sparc.h (EXTRACT_RETURN_VALUE): Call
997 sparc_extract_return_value instead of using inline code.
998 (sparc_extract_return_value): Declare.
999 (STORE_RETURN_VALUE): Call sparc_store_return_value instead
1000 of using inline code.
1001 (sparc_store_return_value): Declare.
1003 Wed Apr 15 12:19:42 1998 Martin M. Hunt <hunt@cygnus.com>
1005 * solib.c (enable_break): Only call warning once
1006 instead of three times.
1008 Tue Apr 14 16:52:59 1998 Mark Alexander <marka@cygnus.com>
1010 * sparc-tdep.c (sparc_extract_struct_value_address): Make it
1011 work correctly on little-endian hosts.
1012 (sparc_push_arguments): New function.
1013 (gdb_print_insn_sparc): New function.
1014 (_initialize_sparc_tdep): Make gdb_print_insn_sparc the default
1015 disassembler, so that SPARClite-specific instructions will
1017 * sparcl-tdep.c (readchar): Print debugging information.
1018 (debug_serial_write): New function, a replacement for SERIAL_WRITE
1019 that prints debugging information.
1020 * config/sparc/tm-sparc.h (PUSH_ARGUMENTS): Define.
1021 (sparc_push_arguments): Declare.
1023 Tue Apr 14 15:43:49 1998 John Metzler <jmetzler@cygnus.com>
1025 * gdbcfgxref (xref_menu): Call new regex and wild card searches
1026 Now you can type in a specific triple like mips64-vr4300-elf or
1027 somthing like mips*.h
1028 (triple_search) wildcardsearch): The new functions
1030 start-sanitize-vr4320
1031 * configure.tgt: Switch over to use tm-4320.h. Since I switched to
1032 MIPS EABI the fixes are no longer backward compatible with 4300.
1033 * tm-vr4320.h: Added
1037 Mon Apr 13 16:28:07 1998 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
1039 * utils.c: (warning) added call to warning_hook
1041 * source.c: (find_source_lines) modified to call warning in case
1042 of source vs. executable time stamp mismatch. Simplified object
1043 file check. Initialized mtime to 0.
1045 * defs.h: added warning_hook prototype
1047 * top.c: added warning_hook prototype.
1049 Mon Apr 13 09:54:08 1998 Keith Seitz <keiths@andros.cygnus.com>
1051 * config/sparc/tm-sun4os4.h (IS_STATIC_TRANSFORM_NAME): Add missing
1054 Fri Apr 10 22:36:28 1998 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1056 Update support for x86 Solaris 2.
1057 * config/i386/tm-i386sol2.h, nm-i386sol2.h: New configuration
1058 files for x86 Solaris 2.
1059 * config/i386/i386sol2.mt, i386sol2.mh: Use them.
1060 * config/sparc/tm-sun4sol2.h (PROCFS_GET_CARRY): New macro, extract
1061 carry flag from a given regset.
1062 (IS_STATIC_TRANSFORM_NAME): New macro, check if a symbol name
1063 is a SunPro transformed name.
1064 * i386-tdep.c (sunpro_static_transform_name): New function to
1065 extract the source name from a SunPro transformed name.
1066 * inferior.h (procfs_first_available, procfs_get_pid_fd):
1068 * infrun.c (wait_for_inferior): Handle breakpoint hit in
1069 signal handler without intervening stop in sigtramp.
1070 * procfs.c (procfs_lwp_creation_handler): Use PROCFS_GET_CARRY
1071 instead of direct access to the status register.
1072 (procfs_get_pid_fd): New function, returns procfs fd for a given pid.
1073 * sol-thread.c (ps_lgetLDT): New function, returns LDT for a given
1075 (sol_find_new_threads): Handle failed libthread_db initialization
1077 * stabsread.c (define_symbol): Use IS_STATIC_TRANSFORM_NAME
1078 to check for a SunPro transformed symbol name.
1080 Fri Apr 10 10:35:35 1998 John Metzler <jmetzler@cygnus.com>
1082 * utils.c (fmthex): A formatting function for hexdumps
1084 * mips-tdep.c (unpack_mips16): Fixed instruction decoding, lots of
1085 bit pattern interpretations. mips_fetch_instruction does not work
1086 for 16 bit instructions. Some confusion remains about sign
1087 extension in backward branches.
1088 (mips32_relative_offset): Sign extension
1089 (mips32_next_pc): Major debugging, bit pattern interpretation
1090 (print_unpack): debugging printf
1091 (fetch_mips_16): new funtion, key on PC low bit, not symbol table
1092 (mips16_next_16): Initial major debugging of this function. Lots
1093 of bit pattern mistakes.
1094 (mips_next_pc): key on low bit of PC, not symbol table.
1095 * symfile.c(generic_load) : Added a download verification which
1096 reads back the loade code. Download chunk size is now a defined
1097 macro. Fixed a bug in which downloading slips into loading one
1098 byte at a time. Lower level functions in monitor.c can load long
1099 sequences of bytes and make use of these fixups. Referencing
1100 bfd-start_address directly was incorrectly getting zero for start.
1102 Thu Apr 9 19:20:32 1998 Ian Lance Taylor <ian@cygnus.com>
1104 * mips-tdep.c (do_fp_register_row): Use alloca rather than arrays
1107 Wed Apr 8 19:21:42 1998 Jason Molenda (crash@bugshack.cygnus.com)
1109 * top.c (print_gdb_version): Print 1998 now.
1111 Wed Apr 8 16:57:22 1998 Philippe De Muyter <phdm@macqel.be>
1113 * source.c: Remove obsolete decl of strstr().
1115 Wed Apr 8 16:47:33 1998 Jason Molenda (crash@bugshack.cygnus.com)
1117 * solib.c (solib_create_inferior_hook): Remove Ulrich Drepper's
1118 patch of March 23 1998.
1119 * breakpoint.c (breakpoint_re_set_one): Remove Ulrich Drepper's
1120 patch of March 23 1998.
1122 Sat Apr 4 10:05:00 1998 Dawn Perchik <dawn@cygnus.com>
1124 * mdebugread.c (parse_partial_symbols): If this is an .mdebug
1125 section in an ELF file, override a symbol's ECOFF section with its
1126 ELF section. Also, fix stabs continuation where a stabs string
1127 continues for more than one continuation.
1129 Mon Apr 6 09:17:48 1998 Andrew Cagney <cagney@b1.cygnus.com>
1131 * mips-tdep.c (mips_push_arguments): Specify dimention of valbuf
1132 using MAX_REGISTER_RAW_SIZE.
1134 Sat Apr 4 10:05:00 1998 Dawn Perchik <dawn@cygnus.com>
1136 * infrun.c: Fix prototype of signals_info to match static funtion.
1138 Thu Apr 2 12:47:41 1998 Frank Ch. Eigler <fche@cygnus.com>
1140 * sol-thread.c (sol_thread_store_registers): Save & restore new
1141 value of single updated register to prevent accidental clobbering.
1143 Wed Apr 1 22:01:09 1998 Mark Alexander <marka@cygnus.com>
1145 * config/sparc/tm-sparclite.h (TARGET_BYTE_ORDER_SELECTABLE): Define.
1146 * config/sparc/sparclite.mt: Link in the erc32 simulator.
1148 Wed Apr 1 16:30:49 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
1150 * ns32k-tdep.c (flip_bytes, ns32k_localcount,
1151 ns32k_get_enter_addr, sign_extend): Restore functions mysteriously
1154 * ns32knbsd-nat.c: New (?) file to support fetching and storing
1155 registers on NetBSD hosts.
1157 * nbsd.mh (NATDEPFILES): put ns32knbsd-nat.o instead of
1160 * ns32km3-nat.c (reg_offset): Get order of floating point
1161 registers correct. Add extra 32382 register offsets.
1162 (REG_ADDRESS): define to point at correct part of thread
1163 state. Use calls to "warning" instead of "message".
1165 * tm-nbsd.h, tm-ns32km3.h (REGISTER_NAMES, NUM_REGS,
1166 REGISTER_BYTES, REGISTER_BYTE): redefine allowing for 32382
1169 Wed Apr 1 13:43:07 1998 Philippe De Muyter <phdm@macqel.be>
1171 * NEWS: m68k-motorola-sysv host support added.
1172 * coffread.c (coff_start_symtab): Accept the filename as an argument,
1173 set it here. Callers updated.
1175 Wed Apr 1 23:13:23 1998 Andrew Cagney <cagney@b1.cygnus.com>
1177 * config/mips/tm-mips.h (REGISTER_VIRTUAL_TYPE): Handle 32 bit SR,
1178 FSR and FIR registers.
1179 (REGISTER_VIRTUAL_SIZE): Compute using REGISTER_VIRTUAL_TYPE.
1180 (REGISTER_RAW_SIZE): Define using REGISTER_VIRTUAL_SIZE.
1182 * config/mips/tm-mips64.h: Ditto.
1184 Tue Mar 31 21:30:39 1998 Nick Clifton <nickc@cygnus.com>
1186 * arm-tdep.c (gdb_print_insn_arm): Attach a fake Thumb symbol
1187 vector to the info structure when disassembling thumb
1190 * coffread.c (coff_symtab_read, read_one_sym,
1191 process_coff_symbol): Support Thumb symbol types.
1193 * dbxread.c (process_one_symbol): Call SMASH_TEXT_ADDRESS (if it
1194 is defined) for function symbols.
1196 Mon Feb 16 14:05:54 1998 Andrew Cagney <cagney@b1.cygnus.com>
1198 * d10v-tdep.c (d10v_extract_return_value): Wierd. GCC wants to
1199 return odd sized register quantities with only half of the first
1202 * config/d10v/tm-d10v.h (USE_STRUCT_CONVENTION): Use stack when
1205 Tue Mar 31 16:39:28 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
1207 * tracepoint.c (get_tracepoint_by_number): change warning to note.
1208 (delete_trace_command): suppress y/n query if no tracepoints, or
1209 if not from_tty. (trace_pass_command): reject junk at end of args.
1210 (read_actions): an action list consisting only of "end" is discarded.
1211 (validate_actionline (for collect command)): an argument beginning
1212 with a dollar_sign but not recognized as a special argument is
1213 parsed like any other expression -- if it isn't a register name,
1214 it's rejected. Also reject an empty argument to while-stepping.
1215 (trace_find_command): reject a negative frame number argument.
1216 (_initialize_tracepoint): set $traceframe initially to -1.
1218 Mon Mar 30 16:42:12 1998 Jason Molenda (crash@bugshack.cygnus.com)
1220 * rdi-share/Makefile.am, rdi-share/aclocal.m4,
1221 rdi-share/configure: New files.
1222 * rdi-share/configure.in: Rewritten to be an autoconf input file.
1223 * rdi-share/Makefile.in, rdi-share/configure: Generated by
1225 * rdi-share/dbg_hif.h, etherdrv.c, hostchan.c: Use autoconf tests
1226 to check environment.
1228 Sun Mar 29 15:17:16 1998 Keith Seitz <keiths@onions.cygnus.com>
1230 * tracepoint.c (trace_start_command): Set trace_running_p.
1231 (trace_stop_command): Clear trace_running_p.
1233 Sat Mar 28 15:19:48 1998 Stan Shebs <shebs@andros.cygnus.com>
1235 * NEWS: Update for 4.17 release.
1237 Fri Mar 27 10:15:50 1998 David Taylor <taylor@tito.cygnus.com>
1239 * tracepoint.c (parse_and_eval_memrange): Fix memory leaks.
1240 (encode_actions): Use the new gen_trace_for_expr function
1241 instead of expr_to_address_and_size; collect registers when
1242 using expressions. (clear_collection_list): Fix memory leak.
1244 1998-03-26 Jim Blandy <jimb@zwingli.cygnus.com>
1246 * ax-gdb.h (gen_trace_for_expr): Add prototype.
1248 Thu Mar 26 17:24:23 1998 David Taylor <taylor@texas.cygnus.com>
1250 * tracepoint.c (validate_actionline): Fix memory leak.
1251 (encode_actions): Fix memory leak.
1253 Thu Mar 26 16:16:55 1998 David Taylor <taylor@tito.cygnus.com>
1255 * tracepoint.c (trace_mention): New function.
1256 (trace_command): Call it.
1258 1998-03-26 Jim Blandy <jimb@zwingli.cygnus.com>
1260 * ax-general.c (ax_reqs): New function.
1261 * ax.h (enum agent_flaws, struct agent_reqs): New types.
1262 (agent_reqs): New extern prototype. Well, actually, this was
1263 there before, due to a premature checkin.
1264 (struct aop_map): Add new `data_size' member.
1265 * ax-general.c (aop_map): Supply its value.
1266 * ax-gdb.c (agent_command): Call ax_reqs, for testing.
1268 * ax-general.c (ax_print): If we encounter an invalid or
1269 incomplete opcode, don't abort; just print an error message.
1271 * ax-gdb.c: Generate trace bytecodes, as appropriate.
1272 (trace_kludge): New variable.
1273 (gen_fetch, gen_bitfield_ref): Emit trace bytecodes, if asked
1275 (expr_to_agent): Ask for no trace bytecodes.
1276 (gen_trace_for_expr): New function.
1277 (agent_command): Call it, and display the result appropriately ---
1278 no struct axs_value, so no type or kind information.
1280 * ax-gdb.c: Use TARGET_CHAR_BIT throughout, not HOST_CHAR_BIT.
1282 Thu Mar 26 22:29:28 1998 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
1284 * tracepoint.c (trace_status_command): Recognize a boolean return
1285 value from the stub to indicate whether trace experiment is
1286 running. Export this value as a global state variable.
1287 (trace_running_p) for use by the GUI. (from Michael Snyder)
1288 (trace_pass_command) added call to modify_tracepoint_hook.
1290 * tracepoint.h export trace_running_p.
1292 Thu Mar 26 13:08:01 1998 David Taylor <taylor@texas.cygnus.com>
1294 * tracepoint.c (validate_actionline): do not error out if
1295 exp->elts[0].opcode is not on short line -- let
1296 expr_to_address_and_size handle it.
1298 1998-03-26 Jim Blandy <jimb@zwingli.cygnus.com>
1300 * tracepoint.c: Include "ax.h", not "agentexpr.h".
1302 * tracepoint.c (encode_actions): Call expr_to_address_and_size,
1303 not simply expr_to_agent.
1305 * ax-general.c: Comment out code in progress, so everyone else can
1308 * gdbtypes.c: Doc fix.
1310 * ax.h, ax-gdb.h, ax-general.c, ax-gdb.c: New files.
1311 * Makefile.in (REMOTE_OBJS): Add ax-general.o and ax-gdb.o.
1312 (SFILES): Add ax-general.c, ax-gdb.c.
1313 (ax_h): New variable.
1314 (ax-general.o, ax-gdb.o): New rules.
1317 Wed Mar 25 11:45:19 1998 Frank Ch. Eigler <fche@cygnus.com>
1319 * configure.in (sim-gpu2): Added target type checking to make
1320 --with-sim-gpu2 option only valid for sky target.
1321 * configure: Regenerated.
1324 Tue Mar 24 16:22:40 1998 Stu Grossman <grossman@bhuna.cygnus.co.uk>
1326 * Makefile.in: Derive SHELL from configure.
1327 * config/d10v/d10v.mt config/m32r/m32r.mt
1328 config/mn10200/mn10200.mt config/mn10300/mn10300.mt : Remove -lm
1329 from SIM. This prevents dependency checking of -lm (under NT
1330 native builds). (It is automatically added by configure if it
1333 * config/d30v/d30v.mt: Ditto.
1335 * doc/configure mswin/configure nlm/configure
1336 testsuite/gdb.base/configure testsuite/gdb.c++/configure
1337 testsuite/gdb.chill/configure testsuite/gdb.disasm/configure
1338 testsuite/gdb.stabs/configure testsuite/gdb.threads/configure:
1339 Regenerate with autoconf 2.12.1 to fix shell issues for NT native
1342 Mon Mar 23 18:10:57 1998 Ulrich Drepper (drepper@cygnus.com)
1344 * solib.c (solib_create_inferior_hook): Rewrite previous
1345 change to check the type of file via BFD.
1347 Mon Mar 23 13:52:28 1998 Ulrich Drepper (drepper@cygnus.com)
1349 * breakpoint.c (breakpoint_re_set_one): Treat bp_shlib_events
1350 like bp_breakpoints.
1351 * solib.c (solib_create_inferior_hook): Relocate section addresses
1352 if the alleged start address doesn't agree with the PC.
1355 Mon Mar 23 13:07:22 1998 Frank Ch. Eigler <fche@cygnus.com>
1357 * configure.in (sim-gpu2): Added --with-sim-gpu2 as configure
1358 option, to allow gdb+sim linking with sky GPU2 library.
1359 * configure: Regenerated.
1362 Sat Mar 21 19:34:49 1998 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
1364 merged changes from Foundry (list follows by file/author):
1366 - Tom Tromey <tromey@cygnus.com>
1367 * Makefile.in (gdbres.o): New target.
1368 (WINDRES): New define.
1369 * configure: Rebuilt.
1370 * configure.in (WINDRES): Define.
1371 (CONFIG_OBS): Include gdbres.o on Windows.
1372 * gdbtool.ico: New file.
1376 - Keith Seitz <keiths@onions.cygnus.com>
1377 (wait_for): Don't reset the timeout_remaining for CYGWIN32,
1378 since we now effectively poll the serial port.
1379 Don't reset the current_timeout, either, since this member is used
1380 by hardwire_readchar to track the timeout and call the ui_loop_hook.
1381 (hardwire_readchar): Poll the serial port for Cygwin32. We timeout
1382 every second, update the UI, and loop around doing this until we
1383 have hit the real timeout or we get data or an error. This will
1384 allow the UI to stay active while gdb is "blocked" talking to the
1386 - Martin M. Hunt <hunt@cygnus.com>
1387 (wait_for): Do reset current_timeout because it is only used to
1388 keep track of what the current timeout for the scb is.
1391 - Martin M. Hunt <hunt@cygnus.com>
1392 (quit_confirm): Change exit message again
1394 (pc_changed_hook): Add prototype.
1395 - Tom Tromey <tromey@cygnus.com>
1396 (quit_confirm): Added missing `else'.
1397 (quit_confirm): Special-case message if init_ui_hook is
1401 - Martin M. Hunt <hunt@cygnus.com>
1402 (find_pc_sect_line): If no symbol information
1403 is found, return correct pc anyway.
1404 (find_methods): Comment out an apparently
1405 bogus error message because it messes up Foundry.
1408 - Martin M. Hunt <hunt@cygnus.com>
1409 (_initialize_serial): Add a description of
1410 "set remotelogbase".
1413 - Martin M. Hunt <hunt@cygnus.com>
1414 (write_register_gen): Add call to
1415 pc_changed_hook if the PC is being changed.
1418 - Martin M. Hunt <hunt@cygnus.com>
1419 (pc_changed_hook): Define.
1422 - Martin M. Hunt <hunt@cygnus.com>
1423 (do_setshow_command): If no arguments are supplied,
1424 don't dump core, instead print out an error message.
1427 - Martin M. Hunt <hunt@cygnus.com>
1428 Make set_raw_breakpoint, set_breakpoint_count,
1429 and breakpoint_count non-static so they are accessible from
1431 (enable_breakpoint): Enable breakpoint
1432 with same disposition instead of changing all breakpoints
1436 - Keith Seitz <keiths@onions.cygnus.com>
1437 Add declarations for annotation hooks.
1440 - Keith Seitz <keiths@onions.cygnus.com>
1441 Add hooks: annotate_starting_hook, annotate_stopped_hook,
1442 annotate_signalled_hook, annotate_exited_hook.
1443 (annotate_starting): If hook exists, call it instead.
1444 (annotate_stopped): If hook exists, call it instead.
1445 (annotate_exited): If hook exists, call it instead.
1446 (annotate_signalled): If hook exists, call it instead.
1448 Fri Mar 20 14:45:36 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
1450 * gdbserver/Makefile.in: add dependency on XM_CLIBS.
1451 * gdbserver/low-sim.c (registers) force into alignment.
1452 (create_inferior): Fix typo on new_argv; add abfd arg to
1453 sim_open, sim_create_inferior. Add reg_size arg to
1454 sim_fetch_register, sim_store_register. Make simulator
1455 take a single-step to get into a known running state.
1456 * gdbserver/gdbreplay.c: include fcntl.h for def'n of F_SETFL.
1457 * gdbserver/server.c: Add remote_debug variable to control
1459 * gdbserver/server.h: Add prototypes for enable/disable_async_io.
1460 * gdbserver/remote-utils.c: add verbose debugging output controlled
1461 by "remote_debug" variable. Add call to "disable_async_io()"
1462 to avoid being killed by async SIGIO signals.
1463 * config/m32r/m32r.mt: define GDBSERVER_(LIBS and DEPFILES),
1464 so that gdbserver can be built with the m32r simulator.
1466 Fri Mar 20 09:04:06 1998 Andrew Cagney <cagney@b1.cygnus.com>
1468 start-sanitize-r5900
1469 * config/mips/tm-r5900.h (REGISTER_VIRTUAL_SIZE): Redefine as
1470 expression from REGISTER_VIRTUAL_TYPE.
1471 (REGISTER_RAW_SIZE): Ditto.
1472 (REGISTER_VIRTUAL_TYPE): Redefine, use explicit size for 32 bit
1476 * gdbtypes.h (builtin_type_{,u}int{8,16,32,64}): New gdb builtin
1478 start-sanitize-r5900
1479 (builtin_type_{,u}int128): Ditto.
1482 * gdbtypes.c (_initialize_gdbtypes): Initialize new types.
1484 * mips-tdep.c (do_gp_register_row): Pad register value when GP
1485 register is smaller than MIPS_REGSIZE.
1487 * findvar.c (value_of_register): When raw and virtual register
1488 values identical, check that sizes are consistent.
1490 Thu Mar 19 11:32:15 1998 Michael Snyder (msnyder@cleaver.cygnus.com)
1492 * minsyms.c (compare_minimal_symbols): If addresses are identical,
1493 then compare on names. Sorted list should have symbols with
1494 identical addresses AND names adjacent, so dups can be discarded.
1496 Wed Mar 18 12:50:17 1998 Jeff Law (law@cygnus.com)
1498 * stabsread.c (define_symbol): Don't look for ',' as a LRS
1501 Wed Mar 18 10:34:51 1998 Nick Clifton <nickc@cygnus.com>
1503 * rdi-share/etherdrv.c: Set sys_errlist[] as char * not const char *.
1505 Fri Mar 13 15:43:53 1998 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1507 * config/mips/xm-mips.h (CC_HAS_LONG_LONG): Undefine for Ultrix
1508 when compiling with native cc, the compiler has broken long long
1511 Fri Mar 13 15:37:02 1998 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1513 * config/m68k/xm-sun3os4.h: Remove malloc declarations, they
1514 are handled via autoconf now.
1515 * remote.c (remote_ops, extended_remote_ops): Replace static
1516 forward declaration by moving the static definition to the top of
1517 the file, for old K&R compilers.
1518 * tracepoint.c (collect_symbol, trace_start_command):
1519 Replace ANSI string concatenation with K&R compatible simple string.
1521 1998-03-11 Fred Fish <fnf@ninemoons.com>
1523 * source.c (select_source_symtab): Don't reach error if we have
1524 a current_source_symtab from reading in partial symbol table.
1526 start-sanitize-vr4320
1527 Tue Mar 10 16:15:13 1998 Gavin Koch <gavin@cygnus.com>
1529 * configure.tgt (mips64*vr4320*el-*-elf*) : Removed spurious case.
1532 Fri Mar 6 13:10:27 1998 Fred Fish <fnf@cygnus.com>
1534 * utils.c (quit): Call SERIAL_DRAIN_OUTPUT rather than
1535 SERIAL_FLUSH_OUTPUT.
1536 * serial.h (struct serial_ops): Add drain_output, pointer to
1537 function that waits for output to drain.
1538 (SERIAL_DRAIN_OUTPUT): Macro to wait for output to drain.
1539 * ser-unix.c (hardwire_drain_output): New function and prototype.
1541 * ser-unix.c (hardwire_ops): Add entry for drain_output function.
1542 * ser-tcp.c (tcp_ops): Ditto.
1543 * ser-ocd.c (ocd_ops): Ditto.
1544 * ser-mac.c (mac_ops): Ditto.
1545 * ser-go32.c (dos_ops): Ditto.
1546 * ser-e7kpc.c (e7000pc_ops): Ditto.
1548 Thu Mar 5 16:07:41 1998 Michael Snyder (msnyder@cleaver.cygnus.com)
1550 * sparcl-tdep.c: fix #endif comments
1552 Thu Mar 5 15:10:35 1998 Jason Molenda (crash@bugshack.cygnus.com)
1554 * Makefile.in (BISON): Configure substitutes in @YACC@, not @BISON@.
1556 Thu Mar 5 14:42:41 1998 Keith Seitz <keiths@onions.cygnus.com>
1558 * ocd.c (ocd_open): If we fail ocd_start_remote, make sure we
1559 error () so that we abort out of bdm_ppc_open.
1561 Wed Mar 4 16:53:52 1998 Martin M. Hunt <hunt@cygnus.com>
1563 * serial.c (_initialize_serial): Add a description of
1564 "set remotelogbase".
1566 * command.c (do_setshow_command): If no arguments are supplied,
1567 don't dump core, instead print out an error message.
1569 Wed Mar 4 16:50:18 1998 Jason Molenda (crash@bugshack.cygnus.com)
1571 * gdbtk.c (gdb_listfiles): Fix thinko in last change.
1573 Wed Mar 4 15:34:49 1998 Jason Molenda (crash@bugshack.cygnus.com)
1575 * gdbtk.c (gdb_listfiles): Allocate space for 'files' dynamically.
1577 Wed Mar 4 01:39:08 1998 Ron Unrau <runrau@cygnus.com>
1579 * elfread.c (elf_symtab_read): merge SYMBOL_IS_SPECIAL into
1580 MAKE_MSYMBOL_SPECIAL
1581 * config/mips/tm-mips.h: ditto
1583 Tue Mar 3 17:19:08 1998 John Metzler <jmetzler@cygnus.com>
1585 start-sanitize-vr4111
1586 * config/mips/tm-vr4xxx.h: implements vr4111 as separate from 4300
1587 * config/mips/vr4xxx.tm: implements vr4111 as separate from 4300
1588 * configure.tgt: Recognise mips64vr4111-*-elf as vr4xxx
1590 * dwarfread.c (read_tag_pointer_type): Pointer sizes now come from
1591 TARGET_PTR_BIT rather from sizeof(char *) on host.
1593 Tue Mar 3 14:37:02 1998 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1595 * alpha-nat.c (fetch_osf_core_registers): Renamed from
1596 fetch_aout_core_registers.
1597 (alpha_osf_core_fns): Renamed from alpha_aout_core_fns, change
1598 flavour to bfd_target_unknown_flavour for OSF core files.
1600 start-sanitize-vr4320
1601 Tue Mar 3 11:12:39 1998 Gavin Koch <gavin@cygnus.com>
1603 * configure.tgt (mips64*vr4320*el-*-elf*,mips64*vr4320*-*-elf*) :
1607 Mon Mar 2 17:44:13 1998 Michael Snyder (msnyder@cleaver.cygnus.com)
1609 * breakpoint.c (_initialize_breakpoint): Make "en" an alias
1610 for "enable" (so that it doesn't conflict with "end").
1612 Mon Mar 2 17:04:25 1998 Jason Molenda (crash@bugshack.cygnus.com)
1614 * Makefile (VERSION): Bump to 4.17.1.
1616 Mon Mar 2 16:59:15 1998 Jason Molenda (crash@bugshack.cygnus.com)
1618 * rdi-share/etherdrv.c (sys_errlist): Add correct decl for Linux.
1620 Mon Mar 2 16:51:44 1998 Jason Molenda (crash@bugshack.cygnus.com)
1622 * Makefile.in (YYFILES): Remove in maintainer-clean, not distclean.
1624 Mon Mar 2 16:47:11 1998 Philippe De Muyter <phdm@macqel.be>
1626 * Makefile.in (distclean): Add `rm $(YYFILES)'.
1628 Mon Mar 2 16:45:48 1998 Philippe De Muyter <phdm@macqel.be>
1630 * coffread.c (coff_read_enum_type): Set TYPE_FLAG_UNSIGNED if enum
1633 Sun Mar 2 15:16:13 1998 Richard Henderson <rth@cygnus.com>
1635 * configure.host, configure.tgt: Add sparc-linux.
1636 * sparc-nat.c: Include <asm/reg.h> not <machine/reg.h> for Linux.
1637 * config/sparc/*linux*: New files.
1639 Mon Mar 2 12:12:41 1998 Anthony Thompson (athompso@cambridge.arm.com)
1641 * arm-tdep.c (gdb_print_insn_arm): Call print_insn_big_arm
1642 if we're big endian; else call print_insn_little_arm.
1644 Mon Feb 24 11:24:57 1998 Richard Henderson <rth@cygnus.com>
1646 * Makefile.in (BISON): Don't even pretend to use yacc.
1647 (c-exp.tab.o): Use bison -o to use a unique intermediate file.
1648 (f-exp.tab.o, m2-exp.tab.o): Likewise.
1650 (jv-exp.tab.o): Likewise.
1653 Tue Feb 24 03:32:59 1998 Andrew Cagney <cagney@b1.cygnus.com>
1655 * remote-sim.c (gdbsim_fetch_register): Don't abort when the
1656 register size is wrong.
1658 start-sanitize-r5900
1659 Tue Feb 24 02:53:41 1998 And<rew Cagney <cagney@b1.cygnus.com>
1661 * config/mips/tm-r5900.h (REGISTER_VIRTUAL_SIZE,
1662 REGISTE_RAW_SIZE): Re-define.
1665 Thu Feb 19 16:49:48 1998 John Metzler <jmetzler@cygnus.com>
1667 * target.c (debug_to_fetch_registers,debug_to_store_registers,
1668 debug-to_insert_breakpoint,debug_to_remove_breakpoint): tracing
1669 64 bit targets crashed long long printfs.
1671 Tue Feb 17 16:36:22 1998 Michael Snyder (msnyder@cleaver.cygnus.com)
1673 * symfile.c (read_target_int_array): rename read_target_long_array
1674 and force the sizeof an ovly_table element to sizeof(long),
1675 instead of sizeof(int).
1677 Tue Feb 17 18:05:05 1998 Frank Ch. Eigler <fche@cygnus.com>
1679 * remote-mips.c (mips_request): Use unsigned long during parsing
1680 returned value from monitor, to prevent accidental sign extension.
1682 Tue Feb 17 14:28:33 1998 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
1684 * acconfig.h: FORCE_MMCHECK changed to MMCHECK_FORCE.
1685 * configure.in: Ditto.
1686 * configure: Regenerated.
1688 Tue Feb 17 14:07:34 1998 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
1690 * gdbtypes.c (check_typedef): Do not try to resolve the length of
1691 a type which has TYPE_FLAG_TARGET_STUB set, if the target type has
1692 set TYPE_FLAG_TARGET_STUB as well.
1694 Tue Feb 17 14:32:18 1998 Andrew Cagney <cagney@b1.cygnus.com>
1696 * remote-sim.c (gdbsim_fetch_register, gdbsim_store_register):
1697 Pass register size to sim_{fetch,store}_register. Check nr of
1698 register bytes transfered is correct.
1700 Mon Feb 16 14:05:54 1998 Andrew Cagney <cagney@b1.cygnus.com>
1702 * remote-d10v.c (remote_d10v_open): Call push_remote_target
1703 instead of open_remote_target.
1705 * remote.c (remote_xfer_memory): Use REMOTE_TRANSLATE_XFER_ADDRESS
1706 to translate addr/size when defined.
1707 (open_remote_target): Delete.
1709 * target.h (open_remote_target): Delete.
1711 * config/d10v/tm-d10v.h (REMOTE_TRANSLATE_XFER_ADDRESS): Define.
1713 Mon Feb 16 14:05:54 1998 Andrew Cagney <cagney@b1.cygnus.com>
1715 * config/d10v/tm-d10v.h (USE_STRUCT_CONVENTION): Define. True when
1718 Mon Feb 16 14:05:54 1998 Andrew Cagney <cagney@b1.cygnus.com>
1720 * config/d10v/tm-d10v.h (USE_STRUCT_CONVENTION): Define. True when
1723 Sun Feb 15 16:10:50 1998 Ron Unrau <runrau@cygnus.com>
1725 * parse.c (write_dollar_variable): call new function
1726 target_map_name_to_register to allow targets to define their own
1727 register name aliases.
1728 * infcmd.c (registers_info): use target_map_name_to_register so that
1729 "print $reg" and "info reg $reg" use the same register name aliases.
1731 Fri Feb 13 16:40:30 1998 Stan Shebs <shebs@andros.cygnus.com>
1733 * config/i386/i386mk.mt (OBJFORMATS): Delete, no longer used.
1734 * config/i386/xm-i386mk.h: Fix an include.
1735 * config/pyr/tm-pyr.h (PC_INNER_THAN): Remove, never used.
1737 Thu Feb 12 16:12:07 1998 Frank Ch. Eigler <fche@cygnus.com>
1739 * remote-mips.c (mips_enter_debug): Sleep before sending CR to
1741 (mips_exit_debug): Accept any whitespace / verbiage before monitor
1744 Thu Feb 12 18:25:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
1746 * d10v-tdep.c (show_regs): Avoid use of %llx when printing 8 byte
1749 Thu Feb 12 17:10:22 1998 Andrew Cagney <cagney@b1.cygnus.com>
1751 * valops.c (value_at): For d10v, make read pointers with
1752 read_target_unsigned_integer, keep addresses unsigned.
1753 (value_fetch_lazy): Ditto.
1755 Thu Feb 12 12:14:02 1998 Andrew Cagney <cagney@b1.cygnus.com>
1757 * remote-d10v.c: New file. Layer the d10v GDB->remote memory map
1758 on top of the remote serial memory transfer functions.
1760 * config/d10v/d10v.mt (TDEPFILES): Add remote-d10v.o
1762 * Makefile.in (remote-d10v.o): Add dependencies.
1764 * remote.c (remote_open_1): Add arg extended_p, engage extended
1765 protocol when extended_p.
1766 (remote_open, extended_remote_open): Pass !extended_p /
1767 extended_p to remote_open_1.
1769 * remote.c (open_remote_target), target.h: New function.
1771 Wed Feb 11 08:41:15 1998 Andrew Cagney <cagney@b1.cygnus.com>
1773 * config/i386/fbsd.mh (XDEPFILES): Add ser-tcp.o.
1775 Tue Feb 10 17:50:37 1998 Keith Seitz <keiths@onions.cygnus.com>
1777 * tracepoint.c (tracepoint_operation): Call the modify_tracepoint_hook
1779 Remove static declaration of free_actions.
1781 * tracepoint.h: Add declaration of free_actions.
1783 Tue Feb 10 12:17:13 1998 Fred Fish <fnf@cygnus.com>
1785 * symtab.c (decode_line_1): Revert change that mistakenly
1786 removed assignment of sals[0].pc field.
1788 Mon Feb 10 12:37:47 1998 Philippe De Muyter <phdm@macqel.be>
1790 * m68k/tm-delta68.h (EXTRACT_RETURN_VALUE): Type argument for
1791 `REGISTER_CONVERT_TO_VIRTUAL is `TYPE', not
1792 `REGISTER_VIRTUAL_TYPE (FP0_REGNUM)';
1793 (STORE_RETURN_VALUE): Ditto, and offset for `write_register_bytes'
1794 is `REGISTER_BYTE (FP0_REGNUM)', not `FP0_REGNUM'.
1795 (FRAME_NUM_ARGS): New macro.
1796 * m68k/tm-news.h (EXTRACT_RETURN_VALUE, STORE_RETURN_VALUE): Ditto.
1797 * delta68-nat.c (clear_insn_cache): New function, forgotten in previous
1800 Mon Feb 9 11:10:06 1998 Andrew Cagney <cagney@b1.cygnus.com>
1802 * d10v-tdep.c: Replace references to IMEM_ADDR and DMEM_ADDR with
1803 D10V_MAKE_[DI]ADDR and D10V_CONVERT_[ID]ADDR_TO_RAW macros.
1805 * config/d10v/tm-d10v.h (IMEM_START): Move to 0x01......
1806 (DMEM_START): Move to 0x00......
1807 (STACK_START): Move to 0x00..7ffe.
1808 (D10V_MAKE_IADDR, D10V_MAKE_DADDR): Translate unconditionally.
1810 * d10v-tdep.c (d10v_xlate_addr): Delete function.
1812 Mon Feb 9 15:10:21 1998 Fred Fish <fnf@cygnus.com>
1814 * symtab.c (fixup_psymbol_section): Move forward declaration to
1815 top of file with other such decls. Make it a static function.
1816 * symtab.h: Minor formatting tweaks.
1818 Mon Feb 9 13:14:12 1998 Stan Shebs <shebs@andros.cygnus.com>
1820 * config/a29k-udi.mt, config/i960/vxworks960.mt (REMOTE_OBS):
1821 Remove redefinition.
1822 * config/i960/tm-i960.h (BREAKPOINT): Define.
1824 Mon Feb 9 15:35:38 1998 Ian Lance Taylor <ian@cygnus.com>
1826 * Makefile.in (init.c): Ignore errors when making init.c. Seems
1827 necessary to work around bug in Solaris make.
1829 Sun Feb 6 02:44:28 1997 Philippe De Muyter <phdm@macqel.be>
1831 * m68k/tm-delta68.h (CPLUS_MARKER): Macro deleted.
1832 (EXTRACT_STRUCT_VALUE_ADDRESS): Macro defined.
1833 (EXTRACT_RETURN_VALUE, STORE_RETURN_VALUE): Macros modified
1834 because floating-point values return via %fp0.
1835 (CLEAR_INSN_CACHE): New macro.
1836 * m68k/tm-m68k.h (REGISTER_CONVERT_TO_VIRTUAL): Macro fixed
1838 (REGISTER_CONVERT_TO_RAW): Ditto.
1839 * infptrace.c (child_xfer_memory): If CLEAR_INSN_CACHE is defined,
1840 call it after having written in child process's memory.
1841 * inflow.c (PROCESS_GROUP_TYPE): Macro defined if HAVE_TERMIO.
1842 (gdb_has_a_terminal, terminal_ours_1): Functions fixed for HAVE_TERMIO.
1844 Fri Feb 6 16:17:30 1998 Jeffrey A Law (law@cygnus.com)
1846 * config/mips/tm-mips64.h (TARGET_LONG_BIT): Allow final target to
1848 (TARGET_LONG_LONG_BIT): Likewise.
1849 (TARGET_PTR_BIT): Likewise.
1850 start-sanitize-r5900
1851 * config/mips/tm-r5900.h (TARGET_PTR_BIT): Define to 32 bits.
1855 Fri Feb 6 14:33:34 1998 Doug Evans <devans@canuck.cygnus.com>
1857 * configure.tgt (mips64r5900*-sky-elf*): Replaces txvu-elf.
1858 * config/mips/txvu.mt (SIM): txvu -> mips.
1861 Fri Feb 6 17:42:22 1998 Andrew Cagney <cagney@b1.cygnus.com>
1863 * config/d10v/tm-d10v.h (D10V_CONVERT_IADDR_TO_RAW,
1864 D10V_CONVERT_DADDR_TO_RAW): Define.
1866 * d10v-tdep.c (d10v_push_arguments): Re-write. Pass arguments in
1867 registers, regardless of their size, when they fit.
1869 Thu Feb 5 13:16:36 1998 Andrew Cagney <cagney@b1.cygnus.com>
1871 * d10v-tdep.c (d10v_extract_return_value): For function pointers
1872 translate address to IMAP area.
1874 * config/d10v/tm-d10v.h (EXTRA_FRAME_INFO): Delete dummy from
1876 (POP_FRAME): Point at generic_pop_current_frame.
1878 * d10v-tdep.c (d10v_pop_frame): Delete code handling dummy frames,
1880 (d10v_push_return_address): New function.
1881 (d10v_pop_dummy_frame): Delete.
1882 (d10v_fix_call_dummy): Delete.
1883 (d10v_call_dummy_address): Delete.
1885 * d10v-tdep.c (d10v_init_extra_frame_info): Clear dummy and
1888 * d10v-tdep.c (d10v_push_arguments): Keep stack word aligned.
1890 * config/d10v/tm-d10v.h (EXTRACT_STRUCT_VALUE_ADDRESS): Extract
1891 address of structure from first ARG1_REGNUM.
1893 * d10v-tdep.c (d10v_push_arguments): Force 4 byte args into
1894 even-odd register pair. Store 1 and 2 byte args in registers.
1896 * valops.c (value_fetch_lazy): Ensure that a D10V function pointer
1897 is fetched in the correct byte order.
1898 (value_at): Ditto. Also ensure data pointers are mapped to data
1901 * config/d10v/tm-d10v.h (D10V_DADDR_P, D10V_IADDR_P):
1903 * d10v-tdep.c: Replace 2 with REGISTER_RAW_SIZE.
1904 (d10v_pop_frame): Replace R13 with LR_REGNUM.
1905 (d10v_push_arguments): Replace R2 with ARG1_REGNUM.
1906 (d10v_push_arguments): Replace 6 with ARGN_REGNUM.
1907 (d10v_extract_return_value): Access return value with RET1_REGNUM.
1909 * config/d10v/tm-d10v.h (ARG1_REGNUM, ARGN_REGNUM, RET1_REGNUM):
1911 (STORE_RETURN_VALUE): Specify return register using RET1_REGNUM.
1912 (STORE_STRUCT_RETURN): Specify ARG1_REGNUM as the struct ptr
1915 Thu Feb 5 13:16:36 1998 Andrew Cagney <cagney@b1.cygnus.com>
1917 * blockframe.c (generic_pop_dummy_frame): Flush the frame, no
1920 * blockframe.c (generic_pop_current_frame), frames.h: New
1923 Thu Feb 5 17:18:16 1998 Andrew Cagney <cagney@b1.cygnus.com>
1925 * remote-sim.c (gdbsim_create_inferior): clear_proceed_status
1926 before /re/starting the simulator.
1928 Thu Feb 5 15:55:31 1998 C. M. Heard (heard@vvnet.com)
1930 * top.c (do_nothing): Remove signal handler after signal is caught.
1932 Thu Feb 5 11:57:06 1998 Michael Snyder (msnyder@cleaver.cygnus.com)
1934 * tracepoint.c (tracepoint_operation): call free_actions instead
1935 of free. (free_actions): eliminate some memory leaks for actions.
1936 (validate_actionline): pass string arg by reference, so we can
1937 change the pointer. Change all memrange collection arguments to
1938 canonical form (literal address and size), to enforce early
1939 evaluation. Accept UNOP_MEMVAL (assembly variables) for
1940 trace collection. (parse_and_eval_memrange): accept expressions
1941 for the address and size fields of a memrange (and evaluate
1942 them immediately). (several places): use -1 instead of zero
1943 to distinguish an absolute memrange from a register-relative one.
1944 (encode_actions): add handling for UNOP_MEMVAL (assembly variable).
1946 Wed Feb 4 17:40:21 1998 Jason Molenda (crash@bugshack.cygnus.com)
1948 * Makefile.in (SFILES): add tracepoint.c.
1949 (LINTFILES): add @CONFIG_SRCS@.
1951 * configure.in (CONFIG_SRCS): Mirror use of CONFIG_OBS.
1952 * configure: Regenerated.
1954 Tue Feb 3 16:12:32 1998 Gordon W. Ross (gwr@mc.com)
1956 * infptrace.c (child_resume): Don't try to step if
1957 NO_SINGLE_STEP is defined.
1959 Mon Feb 2 19:06:13 1998 Jason Molenda (crash@bugshack.cygnus.com)
1961 * Makefile.in (VERSION): Bump to 4.16.2.
1963 Mon Feb 2 17:18:25 1998 Richard Henderson <rth@cygnus.com>
1965 * alpha-nat.c (fetch_aout_core_registers): Rename from
1966 fetch_core_registers.
1967 (fetch_elf_core_registers): New function.
1968 (supply_gregset): Use ALPHA_REGSET_BASE.
1969 (supply_fpregset): Likewise.
1970 (fill_fpregset): Likewise.
1971 (alpha_aout_core_fns): Rename from alpha_core_fns.
1972 (alpha_elf_core_fns): New.
1973 * config/alpha/alpha-linux.mh (NATDEPFILES): solib.o not osfsolib.o.
1975 * config/alpha/nm-linux.h (SVR4_SHARED_LIBS): Define if ELF.
1976 (TARGET_ELF64): Likewise.
1977 (ALPHA_REGSET_BASE): New.
1978 * config/alpha/nm-osf.h (ALPHA_REGSET_BASE): New.
1979 * config/alpha/tm-alphalinux.h: Include tm-sysv4.h.
1981 * solib.c (elf_locate_base): Add TARGET_ELF64 support.
1982 (info_sharedlibary_command): Likewise.
1984 * configure.host: Match alpha*.
1985 * configure.tgt: Likewise.
1987 Fri Jan 30 15:11:38 1998 David Taylor <taylor@texas.cygnus.com>
1989 Changes by <Peter.Schauer@Regent.E-Technik.TU-Muenchen.DE>
1990 * infrun.c (IN_SOLIB_DYNSYM_RESOLVE_CODE): new macro for detecting
1991 whether we are in the dynamic symbol resolution code
1992 (wait_for_inferior): invoke it.
1993 * solib.c (in_svr4_dynsym_resolve_code): new function
1994 (enable_break): record start and end of the dynamic linker
1995 text and plt sections for use in in_svr4_dynsym_resolve_code.
1996 * solib.h (IN_SOLIB_DYNSYM_RESOLVE_CODE): add svr4 definition;
1997 (in_svr4_dynsym_resolve_code): declare it.
1998 * config/nm-gnu.h (solib.h): move inclusion to after definition
1999 of SVR4_SHARED_LIBS.
2000 * config/nm-sysv4.h (solib.h): ditto.
2001 * config/i386/nm-i386sco5.h (solib.h): ditto.
2002 * config/i386/nm-linux.h (solib.h): ditto.
2003 * config/mips/nm-irix5.h (IN_SOLIB_DYNSYM_RESOLVE_CODE): undefine.
2005 Thu Jan 29 19:39:31 1998 Stan Shebs <shebs@andros.cygnus.com>
2007 * coffread.c (coff_symtab_read) [SEM]: Remove code, macro can
2009 * dbxread.c (process_one_symbol) [BLOCK_ADDRESS_ABSOLUTE]:
2010 Remove, no longer needed.
2011 * hppa-tdep.c (N_SET_MAGIC): Remove, no longer used.
2012 * config/pa/xm-hppab.h (SEEK_SET, SEEK_CUR, SEEK_END): Ditto.
2013 * config/mips/tm-mipsm3.h (NUMERIC_REG_NAMES): Ditto.
2014 * config/mips/mipsm3.mt (TDEPFILES): Remove mipsread.o.
2016 Wed Jan 28 14:46:52 1998 Stan Shebs <shebs@andros.cygnus.com>
2018 Suggested by Chris Walter <walter@budoe.bu.edu>:
2019 * dwarfread.c (set_cu_language): Recognize Fortran.
2020 * dwarf2read.c (set_cu_language): Ditto.
2021 (read_array_type): Fix language test.
2023 Wed Jan 28 12:51:08 1998 Michael Snyder (msnyder@cleaver.cygnus.com)
2025 * blockframe.c (generic_frame_chain_valid): A frame pointer may
2026 be valid if it is equal to the frame pointer of its caller (ie.
2027 not necessarily strictly INNER_THAN). Allows frameless functions.
2029 Wed Jan 28 11:23:25 1998 Mark Alexander <marka@cygnus.com>
2031 * monitor.c (monitor_vsprintf): New function to handle
2032 printing of large addresses using %A format specifier.
2033 (monitor_printf_noecho, monitor_printf): Use monitor_vsprintf
2034 instead of vsprintf.
2035 * dve3900-rom.c (_initialize_r3900_rom): Use %A instead of %Lx
2038 Tue Jan 27 16:14:23 1998 Jason Molenda (crash@bugshack.cygnus.com)
2040 * configure.in (CONFIG_LDFLAGS): Only add -export-dynamic
2043 Mon Jan 26 19:07:46 1998 Jason Molenda (crash@bugshack.cygnus.com)
2045 * config/alpha/tm-alphalinux.h (alpha_linux_sigtramp_offset):
2046 Add closing parenthesis. From HJ Lu.
2048 Mon Jan 26 17:54:45 1998 Mark Alexander <marka@cygnus.com>
2050 * dve3900-rom.c: Improve performance by using memory commands
2051 that print less fluff. Minor cosmetic changes.
2052 Eliminate compiler warnings.
2054 Sat Jan 24 23:44:43 1998 Martin M. Hunt <hunt@cygnus.com>
2056 * breakpoint.c (enable_breakpoint): Preserve breakpoint
2057 disposition when enabling a breakpoint.
2059 * symtab.c (find_pc_sect_line): If no symbol information
2060 is found, return correct pc anyway.
2062 Fri Jan 23 17:26:22 1998 Stan Shebs <shebs@andros.cygnus.com>
2064 * configure.host (i[3456]86-*-osf1mk*, mips-*-mach3*,
2065 ns32k-*-mach3*): Fix file names.
2066 (i[3456]86-*-os9k, m88*-*-mach3*, w65-*-*): Remove config
2067 recognition, no source files for these.
2068 * configure.tgt (powerpc-*-aix4*): Remove config, now identical
2070 * config/powerpc/{aix4.mh,aix4.mt,tm-ppc-aix4.h}: Remove files,
2073 Fri Jan 23 16:49:41 1998 Mark Alexander <marka@cygnus.com>
2075 * monitor.c (monitor_write, monitor_readchar): New functions.
2076 * monitor.h (monitor_write, monitor_readchar): Declare.
2077 * dve3900-rom.c: Add support for fast loading on ethernet connections.
2079 Fri Jan 23 07:47:06 1998 Fred Fish <fnf@cygnus.com>
2081 * config/d10v/tm-d10v.h (CALL_DUMMY): Define as "{ 0 }".
2082 (TARGET_READ_FP): Define to d10v_read_fp rather than d10v_read_sp.
2083 (TARGET_WRITE_FP): Define to d10v_write_fp rather than d10v_write_sp.
2084 (d10v_write_fp, d10v_read_fp): Add prototypes.
2085 * symtab.c (decode_line_1): Remove assignment of sals[0].pc field.
2086 * symfile.c (simple_overlay_update, simple_overlay_update_1):
2087 Ignore the size of overlay sections. This check is redundant anyway.
2088 * printcmd.c (print_frame_args): Ditto.
2089 * valops.c (value_fetch_lazy): Ditto.
2090 * values.c (unpack_long): Ditto.
2091 * d10v-tdep.c (d10v_frame_chain, d10v_frame_find_saved_regs,
2092 d10v_init_extra_frame_info): Fix some minor bugs so the finish command
2094 (show_regs): Change num1 and num2 types from "long long" to "LONGEST".
2095 (d10v_read_fp, d10v_write_fp): New functions.
2096 (d10v_push_arguments): Remove unneeded assigns to "val" and "contents".
2097 (d10v_push_arguments): Fix for pointers and structs.
2098 (d10v_extract_return_value): Fix for pointers and chars.
2100 Tue Jan 20 18:53:18 1998 Stan Shebs <shebs@andros.cygnus.com>
2102 * configure.tgt (i386-*-mach*, m88*-*-mach3*): Remove config
2103 recognition, no source files for these (note that the i386 Mach
2104 config is for pre-Mach 3).
2105 (mips*-*-mach3*, ns32k-*-mach3*): Fix file names.
2106 * config/mips/mipsel64.mt: Remove, never referenced.
2108 Mon Jan 19 14:01:28 1998 Stan Shebs <shebs@andros.cygnus.com>
2110 * top.c (print_gdb_version): Restore to original message.
2112 Mon Jan 19 13:34:40 1998 Ian Lance Taylor <ian@cygnus.com>
2114 From cgf@bbc.com (Chris Faylor):
2115 * win32-nat.c (child_mourn_inferior): Call ContinueDebugEvent to
2117 (child_kill_inferior): Respond to all debug events as the child is
2120 * Makefile.in (all): Change gdb dependency to gdb$(EXEEXT).
2121 (uninstall): Add $(EXEEXT) to file name to remove.
2122 (gdb$(EXEEXT)): Rename target from plain gdb.
2123 (gdb1$(EXEEXT)): Rename target from plain gdb1.
2124 (clean, mostlyclean): Add $(EXEEXT) to binary names to remove.
2126 1998-01-16 Felix Lee <flee@cygnus.com>
2128 * top.c (print_gdb_version): delete stutter.
2130 Thu Jan 15 12:29:13 1998 Nick Clifton <nickc@cygnus.com>
2132 * remote-rdi.c (arm_rdi_open): Patch from Tony.Thompson@arm.com
2133 to prevent spurous error messages on non-ICE targets.
2135 Wed Jan 14 19:27:02 1998 Stan Shebs <shebs@andros.cygnus.com>
2137 * config/mips/{r3900.mt,r3900l.mt,tm-r3900.h,tm-r3900l.h}:
2138 Remove, no longer used.
2141 Wed Jan 14 18:11:26 1998 Michael Meissner <meissner@cygnus.com>
2143 Patch from Jim Wilson.
2144 * d30v-tdep.c (d30v_frame_find_saved_regs_offsets): Properly
2145 declare void function before use.
2147 * config/d30v/tm-d30v.h (CALL_DUMMY): Initialize as { 0 }, not {}.
2150 Tue Jan 13 16:38:48 1998 Fred Fish <fnf@cygnus.com>
2152 * configure.in (--with-mmalloc): Add new configure arg to use the
2153 mmalloc package. Default is to not use it.
2154 (START_INFERIOR_TRAPS_EXPECTED): Define to the integer 2, not
2156 * acconfig.h (USE_MMALLOC, FORCE_MMCHECK): Add #undef.
2157 * configure: Regenerated.
2158 * config.in: Regenerated.
2159 * Makefile.in (MMALLOC_DIR, MMALLOC_SRC): Remove.
2160 (MMALLOC): Set using configure.
2161 (MMALLOC_CFLAGS): Set using configure.
2163 * config/i386/tm-linux.h (sys_quotactl): Define to 1 rather
2164 than just defining it.
2165 * mpw-make.sed: Undefine USE_MMALLOC rather than defining NO_MMALLOC.
2166 * utils.c (NO_MMALLOC): Use USE_MMALLOC instead.
2167 * objfiles.c: ditto.
2170 * config/sparc/sun4os4.mh (MMALLOC_CFLAGS): Remove.
2171 * config/m68k/sun3os4.mh (MMALLOC_CFLAGS): Remove.
2172 * config/i386/cygwin32.mh (MMALLOC_CFLAGS): Remove.
2173 * config/alpha/alpha-osf3.mh (MMALLOC_CFLAGS): Remove.
2174 * config/alpha/alpha-osf2.mh (MMALLOC_CFLAGS): Remove.
2175 * gdbserver/Makefile.in (MMALLOC_*): Remove.
2176 * config/rs6000/rs6000.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
2177 * config/rs6000/aix4.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
2178 * config/powerpc/aix4.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
2179 * config/powerpc/aix.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
2180 * config/ns32k/ns32km3.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
2181 * config/mips/mipsm3.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
2182 * config/mips/decstation.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
2183 * config/m88k/cxux.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
2184 * config/i386/xm-windows.h (NO_MMALLOC, NO_MMCHECK): Remove.
2185 * config/i386/i386mk.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
2186 * config/i386/i386m3.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
2187 * config/i386/i386gnu.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
2188 * config/alpha/alpha-osf1.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
2189 * config/alpha/alpha-linux.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
2191 Mon Jan 12 11:46:51 1998 Michael Snyder (msnyder@cleaver.cygnus.com)
2193 * config/m68k/tm-m68k.h (REGISTER_VIRTUAL_TYPE): make A0 thru A7
2194 default to void pointer type (so that their default radix is hex).
2196 * symtab.c: move rbreak_command from no_class to class_breakpoint
2197 so it will be listed under "help breakpoints".
2199 Sat Jan 10 14:58:04 1998 Stan Shebs <shebs@andros.cygnus.com>
2201 * rdi-share/hostchan.c: Remove gettimeofday declaration.
2203 Thu Jan 8 11:03:59 1998 Nick Clifton <nickc@cygnus.com>
2205 * remote-rdp.c: Applied patches submitted by Tony.Thompson@arm.com
2206 to implement the Angel remote debugging interface.
2208 * Makefile.in: Add build rules for remote-rdi.c and
2209 rdi-share/libangsd.a.
2211 * configure.tgt: Updated from source on branch.
2212 * config/arm/tm-arm.h: Updated from source on branch.
2213 * arm-tdep.c: Updated from source on branch.
2215 * rdi-share: New directory, RDI library contributed by ARM.
2217 Mon Jan 5 20:21:59 1998 Mark Alexander <marka@cygnus.com>
2219 * monitor.h (MO_PRINT_PROGRAM_OUTPUT): Define.
2220 * monitor.c (monitor_wait): Echo program output.
2221 * dve3900-rom.c (_initialize_r3900_rom): Remove MO_HANDLE_NL flag,
2222 add MO_PRINT_PROGRAM_OUTPUT flag.
2224 Mon Jan 5 18:21:11 1998 David Taylor <taylor@texas.cygnus.com>
2226 * top.h (HAVE_SIGSETJMP): define SIGJMP_BUF, SIGSETJMP, and
2227 SIGLONGJMP appropriately based on whether HAVE_SIGSETJMP is
2229 * top.c (return_to_top_level, catch_errors): use the new macros
2230 * main.c (SET_TOP_LEVEL): ditto.
2231 * config/xm-sysv4.h (HAVE_SIGSETJMP): Define.
2233 Fri Jan 2 18:48:58 1998 Mark Alexander <marka@cygnus.com>
2235 * configure.in: Double up brackets in shell case pattern.
2237 Fri Jan 2 17:06:05 1998 Michael Snyder (msnyder@cleaver.cygnus.com)
2239 * tracepoint.c (finish_tfind_command): improved algorithm for
2240 deciding when we've "stepped" into a new stack frame.
2241 (map_args_over_tracepoints): loop over tracepoint list "safely",
2242 since list elements may be deleted during loop.
2243 (read_actions): add actions to history list.
2245 For older changes see ChangeLog-97
2251 version-control: never